Does the Bush Administration's climate policy mean climate protection?

International Nuclear Information System (INIS)

Blanchard, Odile; Perkaus, James F.

2004-01-01

The paper analyzes the two major components of the Bush Administration's climate policy, namely an emission intensity target and a technology strategy. The question is whether those components will generate net emission reductions that will contribute to the stabilization of the greenhouse gas concentration at a safe level in the long run. It comes out that the Bush Administration climate policy does not guarantee any meaningful contribution to climate protection. The lenient emission intensity target set by the Administration will most likely allow near term emissions to grow. In the long run, the Bush Administration places a big bet on future climate-friendly technological breakthroughs to cost-effectively compensate for the current and near term net emission increases. But the outcomes of those technological developments are uncertain in terms of emission reduction potential, cost, and timing. The way towards enhanced climate protection will most likely not come from the policies of the current Administration, but rather from the growing concern about the climate issue in Congress and at the state, corporate and civil society levels. These combined forces may raise the playing field at the federal level in the near future

X-ray detector for automatic exposure control using ionization chamber filled with xenon gas

CERN Document Server

Nakagawa, A; Yoshida, T

2003-01-01

This report refers to our newly developed X-ray detector for reliable automatic X-ray exposure control, which is to be widely used for X-ray diagnoses in various clinical fields. This new detector utilizes an ionization chamber filled with xenon gas, in contrast to conventional X-ray detectors which use ionization chambers filled with air. Use of xenon gas ensures higher sensitivity and thinner design of the detector. The xenon gas is completely sealed in the chamber, so that the influence of the changes in ambient environments is minimized. (author)

The Experimental Study of Dynamics of Scaled Gas-Filled Bubble Collapse in Liquid

Science.gov (United States)

Pavlenko, Alexander

2011-06-01

The article provides results of analyzing special features of the single-bubble sonoluminescence, developing the special apparatus to investigate this phenomenon on a larger-scale basis. Certain very important effects of high energy density physics, i.e. liquid compressibility, shock-wave formation under the collapse of the gas cavity in liquid, shock-wave focusing in the gas-filled cavity, occurrence of hot dense plasma in the focusing area, and high-temperature radiation yield are observed in this phenomenon. Specificity of the process is conditioned by the ``ideal'' preparation and sphericity of the gas-and-liquid contact boundary what makes the collapse process efficient due to the reduced influence of hydrodynamic instabilities. Results of experimental investigations; results of developing the facilities, description of methods used to register parameters of facilities and the system under consideration; analytical estimates how gas-filled bubbles evolve in liquid with the regard for scale effects; results of preliminary 1-D gas dynamic calculations of the gas bubble evolution are presented. The work supported by ISTC Project #2116.

Comparison of Two Potassium-Filled Gas-Controlled Heat Pipes

Science.gov (United States)

Bertiglia, F.; Iacomini, L.; Moro, F.; Merlone, A.

2015-12-01

Calibration by comparison of platinum resistance thermometers and thermocouples requires transfer media capable of providing very good short-term temperature uniformity and temperature stability over a wide temperature range. This paper describes and compares the performance of two potassium-filled gas-controlled heat pipes (GCHP) for operation over the range from 420° C to 900° C. One of the heat pipes has been in operation for more than 10 years having been operated at temperature for thousands of hours, while the other was commissioned in 2010 following recently developed improvements to both the design, assembly, and filling processes. It was found that the two devices, despite differences in age, structure, number of wells, and filling processes, realized the same temperatures within the measurement uncertainty. The results show that the potassium-filled GCHP provides a durable and high-quality transfer medium for performing thermometer calibrations with very low uncertainties, over the difficult high-temperature range from 420° C to 900° C.

George W. Bush in Political Time: The Janus Presidency

NARCIS (Netherlands)

Magliocca, G.N.

2009-01-01

This essay places George W. Bush's presidency and the Bush administration in some historical context by applying the model of “political time” developed in recent books by Stephen Skowronek (2008) and Keith Whittington (2007). My thesis is that Bush's political failure during his second term was

Gas-filled hohlraum experiments at the National Ignition Facility

International Nuclear Information System (INIS)

Fernandez, Juan C.; Goldman, S.R.; Kline, J.L.; Dodd, E.S.; Gautier, C.; Grim, G.P.; Hegelich, B.M.; Montgomery, D.S.; Lanier, N.E.; Rose, H.; Schmidt, D.W.; Workman, J.B.; Braun, D.G.; Dewald, E.L.; Landen, O.L.; Campbell, K.M.; Holder, J.P.; MacKinnon, A.J.; Niemann, C.; Schein, J.

2006-01-01

Experiments done at the National Ignition Facility laser [J. A. Paisner, E. M. Campbell, and W. Hogan, Fusion Technol. 26, 755 (1994)] using gas-filled hohlraums demonstrate a key ignition design feature, i.e., using plasma pressure from a gas fill to tamp the hohlraum-wall expansion for the duration of the laser pulse. Moreover, our understanding of hohlraum energetics and the ability to predict the hohlraum soft-x-ray drive has been validated in ignition-relevant conditions. Finally, the laser reflectivity from stimulated Raman scattering in the fill plasma, a key threat to hohlraum performance, is shown to be suppressed by choosing a design with a sufficiently high ratio of electron temperature to density

Differentiated muscles are mandatory for gas-filling of the Drosophila airway system

Directory of Open Access Journals (Sweden)

Yiwen Wang

2015-12-01

Full Text Available At the end of development, organs acquire functionality, thereby ensuring autonomy of an organism when it separates from its mother or a protective egg. In insects, respiratory competence starts when the tracheal system fills with gas just before hatching of the juvenile animal. Cellular and molecular mechanisms of this process are not fully understood. Analyses of the phenotype of Drosophila embryos with malformed muscles revealed that they fail to gas-fill their tracheal system. Indeed, we show that major regulators of muscle formation like Lame duck and Blown fuse are important, while factors involved in the development of subsets of muscles including cardiac and visceral muscles are dispensable for this process, suggesting that somatic muscles (or parts of them are essential to enable tracheal terminal differentiation. Based on our phenotypic data, we assume that somatic muscle defect severity correlates with the penetrance of the gas-filling phenotype. This argues that a limiting molecular or mechanical muscle-borne signal tunes tracheal differentiation. We think that in analogy to the function of smooth muscles in vertebrate lungs, a balance of physical forces between muscles and the elasticity of tracheal walls may be decisive for tracheal terminal differentiation in Drosophila.

The gas filled separator as a separation method to detect transuranic elements

International Nuclear Information System (INIS)

Ninov, V.

1992-08-01

The mass spectrometer NASE (NAchSEparator) built as a post-separator and located behind the velocity filter SHIP at the GSI in Darmstadt, was taken into operation as a gas-filled separator, and its separation properties for fusion products from heavy ion reactions were studied. Chapter 2 describes the principle of separation in a gas-filled magnet. The technical specifications of the separator, the detectors and the setup of detection electronics are outlined in chapter 3. The studies of separation properties are described in chapter 4, and chapter 5 deals with preliminary applications of the gas-filled separator to detect isotopes poor in neutrons, with an atomic number Z = 92, 93. Chapter 6 is concerned with preliminary tests to detect heavy nuclei with an atomic number Z > = 100 by means of light radiation and actinide targets. The experimental results of comparative measurements between the velocity filter SHIP and the gas-filled separator are pointed out in chapter 7, and future application possibilities of gas-filled separators for synthesis of heaviest nuclei through asymmetric reactions are discussed. (orig./BBR) [de

Gas-filled capillaries for plasma-based accelerators

International Nuclear Information System (INIS)

Filippi, F; Anania, M P; Brentegani, E; Biagioni, A; Chiadroni, E; Ferrario, M; Pompili, R; Romeo, S; Cianchi, A; Zigler, A

2017-01-01

Plasma Wakefield Accelerators are based on the excitation of large amplitude plasma waves excited by either a laser or a particle driver beam. The amplitude of the waves, as well as their spatial dimensions and the consequent accelerating gradient depend strongly on the background electron density along the path of the accelerated particles. The process needs stable and reliable plasma sources, whose density profile must be controlled and properly engineered to ensure the appropriate accelerating mechanism. Plasma confinement inside gas filled capillaries have been studied in the past since this technique allows to control the evolution of the plasma, ensuring a stable and repeatable plasma density distribution during the interaction with the drivers. Moreover, in a gas filled capillary plasma can be pre-ionized by a current discharge to avoid ionization losses. Different capillary geometries have been studied to allow the proper temporal and spatial evolution of the plasma along the acceleration length. Results of this analysis obtained by varying the length and the number of gas inlets will be presented. (paper)

Gas-filled capillaries for plasma-based accelerators

Science.gov (United States)

Filippi, F.; Anania, M. P.; Brentegani, E.; Biagioni, A.; Cianchi, A.; Chiadroni, E.; Ferrario, M.; Pompili, R.; Romeo, S.; Zigler, A.

2017-07-01

Plasma Wakefield Accelerators are based on the excitation of large amplitude plasma waves excited by either a laser or a particle driver beam. The amplitude of the waves, as well as their spatial dimensions and the consequent accelerating gradient depend strongly on the background electron density along the path of the accelerated particles. The process needs stable and reliable plasma sources, whose density profile must be controlled and properly engineered to ensure the appropriate accelerating mechanism. Plasma confinement inside gas filled capillaries have been studied in the past since this technique allows to control the evolution of the plasma, ensuring a stable and repeatable plasma density distribution during the interaction with the drivers. Moreover, in a gas filled capillary plasma can be pre-ionized by a current discharge to avoid ionization losses. Different capillary geometries have been studied to allow the proper temporal and spatial evolution of the plasma along the acceleration length. Results of this analysis obtained by varying the length and the number of gas inlets will be presented.

Experimental Study of High-Z Gas Buffers in Gas-Filled ICF Engines

Energy Technology Data Exchange (ETDEWEB)

Rhodes, M A; Kane, J; Loosmore, G; DeMuth, J; Latkowski, J

2010-12-03

ICF power plants, such as the LIFE scheme at LLNL, may employ a high-Z, target-chamber gas-fill to moderate the first-wall heat-pulse due to x-rays and energetic ions released during target detonation. To reduce the uncertainties of cooling and beam/target propagation through such gas-filled chambers, we present a pulsed plasma source producing 2-5 eV plasma comprised of high-Z gases. We use a 5-kJ, 100-ns theta discharge for high peak plasma-heating-power, an electrode-less discharge for minimizing impurities, and unobstructed axial access for diagnostics and beam (and/or target) propagation studies. We will report on the plasma source requirements, design process, and the system design.

HVDC wall bushing performance in wet weather

International Nuclear Information System (INIS)

Lambeth, P.J.

1990-01-01

There is a history of flashovers of wall bushings in rain, even when they are relatively clean. These flashovers appear to be associated generally with a non- uniform rain distribution because of the shielding effect of the valve hall. This paper reports that a study has been made of this problem involving the development of laboratory test techniques to simulate the critical conditions, and also verification that the rapid flashover clean fog test can be used for evaluating a polluted DC bushing. Using these techniques a conventional bushing has been assessed and a method of improving its performance has been found by fitting it with supplementary silicone-rubber sheds, (booster sheds). The effects of various numbers of such sheds on the bushing have been measured, as have the effects of modifications to the booster shed

Developments for transactinide chemistry experiments behind the gas-filled separator TASCA

Energy Technology Data Exchange (ETDEWEB)

Even, Julia

2011-12-13

Topic of this thesis is the development of experiments behind the gas-filled separator TASCA (TransActinide Separator and Chemistry Apparatus) to study the chemical properties of the transactinide elements. In the first part of the thesis, the electrodepositions of short-lived isotopes of ruthenium and osmium on gold electrodes were studied as model experiments for hassium. From literature it is known that the deposition potential of single atoms differs significantly from the potential predicted by the Nernst equation. This shift of the potential depends on the adsorption enthalpy of therndeposited element on the electrode material. If the adsorption on the electrode-material is favoured over the adsorption on a surface made of the same element as the deposited atom, the electrode potential is shifted to higher potentials. This phenomenon is called underpotential deposition. Possibilities to automatize an electro chemistry experiment behind the gas-filled separator were explored for later studies with transactinide elements. The second part of this thesis is about the in-situ synthesis of transition-metal-carbonyl complexes with nuclear reaction products. Fission products of uranium-235 and californium-249 were produced at the TRIGA Mainz reactor and thermalized in a carbon-monoxide containing atmosphere. The formed volatile metal-carbonyl complexes could be transported in a gas-stream. Furthermore, short-lived isotopes of tungsten, rhenium, osmium, and iridium were synthesised at the linear accelerator UNILAC at GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt. The recoiling fusion products were separated from the primary beam and the transfer products in the gas-filled separator TASCA. The fusion products were stopped in the focal plane of TASCA in a recoil transfer chamber. This chamber contained a carbon-monoxide - helium gas mixture. The formed metal-carbonyl complexes could be transported in a gas stream to various experimental setups. All

Gas-filled hohlraum experiments at the national ignition facility.

Energy Technology Data Exchange (ETDEWEB)

Fernández, J. C. (Juan C.); Gautier, D. C. (Donald Cort); Goldman, S. R. (Sanford R.); Grimm, B. M.; Hegelich, B. M. (Bjorn M.); Kline, J. L. (John L.); Montgomery, D. S. (David S.); Lanier, N. E. (Nicholas E.); Rose, H. A. (Harvey A.); Schmidt, D. M. (David M.); Swift, D. C.; Workman, J. B. (Jonathan B.); Alvarez, Sharon; Bower, Dan.; Braun, Dave.; Campbell, K. (Katherine); DeWald, E.; Glenzer, S. (Siegfried); Holder, J. (Joe P.); Kamperschroer, J. H. (James H.); Kimbrough, Joe (Joseph R.); Kirkwood, Robert (Bob); Landen, O. L. (Otto L.); Mccarville, Tom (Tomas J.); Macgowan, B.; Mackinnon, A.; Niemann, C.; Schein, J.; Schneider, M; Watts, Phil; Young, Ben-li [number : znumber] 194154; Young B.

2004-01-01

The summary of this paper is: (1) We have fielded on NIF a gas-filled hohlraum designed for future ignition experiments; (2) Wall-motion measurements are consistent with LASNEX simulations; (3) LPI back-scattering results have confounded expectations - (a) Stimulated Brillouin (SBS) dominates Raman (SRS) for any gas-fill species, (b) Measured SBS time-averaged reflectivity values are high, peak values are even higher, (c) SRS and SBS peak while laser-pulse is rising; and (4) Plasma conditions at the onset of high back-scattering yield high SBS convective linear gain - Wavelengths of the back-scattered light is predicted by linear theory.

Gas-filled hohlraum experiments at the national ignition facility

International Nuclear Information System (INIS)

Fernandez, J.C.; Gautier, D.C.; Goldman, S.R.; Grimm, B.M.; Hegelich, B.M.; Kline, J.L.; Montgomery, D.S.; Lanier, N.E.; Rose, H.A.; Schmidt, D.M.; Swift, D.C.; Workman, J.B.; Alvarez, Sharon; Bower, Dan; Braun, Dave; Campbell, K.; DeWald, E.; Glenzer, S.; Holder, J.; Kamperschroer, J.H.; Kimbrough, Joe; Kirkwood, Robert; Landen, O.L.; Mccarville, Tom; Macgowan, B.; Mackinnon, A.; Niemann, C.; Schein, J.; Schneider, M.; Watts, Phil; Young, Ben-li; Young B.

2004-01-01

The summary of this paper is: (1) We have fielded on NIF a gas-filled hohlraum designed for future ignition experiments; (2) Wall-motion measurements are consistent with LASNEX simulations; (3) LPI back-scattering results have confounded expectations - (a) Stimulated Brillouin (SBS) dominates Raman (SRS) for any gas-fill species, (b) Measured SBS time-averaged reflectivity values are high, peak values are even higher, (c) SRS and SBS peak while laser-pulse is rising; and (4) Plasma conditions at the onset of high back-scattering yield high SBS convective linear gain - Wavelengths of the back-scattered light is predicted by linear theory.

Energy and Climate Change. The Policy of the Bush Administration and the American Public Debate

International Nuclear Information System (INIS)

Noel, Pierre; Reiner, David

2008-01-01

In its oil and energy security policy, the Bush Administration has shown a willingness to serve industrial and regional interests while relying on rhetoric of crisis - energy crisis and national security crisis. The 'Bush energy plan' of stimulating internal energy production by weakening environmental and other regulations has failed politically. In climate change policy, the Bush Administration decided not to sign the Kyoto protocol as well as not to regulate greenhouse gas emissions in the U.S. This policy has had far reaching adverse consequences for the Bush Administration, in both domestic and foreign politics. The Administration has failed at making its technology-only approach accepted as a credible alternative to regulating emissions

Gas-filled targets for large scalelength plasma interaction experiments on Nova

International Nuclear Information System (INIS)

Powers, L.V.; Berger, R.L.; Munro, D.H.

1994-11-01

Stimulated Brillouin backscatter from large scale length gas-filled targets has been measured on Nova. These targets were designed to approximate conditions in indirect drive ignition target designs in underdense plasma electron density (n e ∼10 21 /cm 3 ), temperature (T e >3 keV), and gradient scale lengths (L n ∼ mm, L v >6 mm) as well as calculated gain for stimulated Brillouin scattering (SBS). The targets used in these experiments were gas-filled balloons with polyimide walls (gasbags) and gas-filled hohlraums. Detailed characterization using x-ray imaging and x-ray and optical spectroscopy verifies that the calculated plasma conditions are achieved. Time-resolved SBS backscatter from these targets is <3% for conditions similar to ignition target designs

Fungal cultures of tar bush and creosote bush for production of two phenolic antioxidants (pyrocatechol and gallic acid).

Science.gov (United States)

Ventura, J; Gutiérrez-Sanchez, G; Rodríguez-Herrera, R; Aguilar, C N

2009-01-01

'Tar bush' and 'creosote bush' were substrates of fungal cultivation for tannase production and gallic acid and pyrocatechol accumulation. Aspergillus niger GH1 grew similarly on both plant materials under solid state culture conditions, reaching maximal levels after 4 d. Fungal strain degraded all tannin content of creosote bush after 4 d of fermentation and >75 % of tar bush after 5 d. Higher level of tannase activity was detected in tar bush fermentation. Biotransformation of tannins to gallic acid was high (93 % in creosote bush and 89 % in tar bush). Pyrocatechol was released poorly. Kinetic parameters of tannin conversion were calculated.

INS gas-filled recoil isotope separator

International Nuclear Information System (INIS)

Miyatake, M.; Nomura, T.; Kawakami, H.

1986-09-01

The characteristics and performance of a small sized gas-filled recoil isotope separator recently made at INS are described. The total efficiency and the ΔBρ/Bρ values have been measured using low velocity 16 O, 40 Ar and 68 As ions and found to be 10 and 5 %, respectively. The Z-dependence of the mean charge is discussed. (author)

Beyond Bush: Environmental politics and prospects for US climate policy

International Nuclear Information System (INIS)

Harris, Paul G.

2009-01-01

The United States was a pioneer in domestic environmental lawmaking, and it was a leader in international environmental cooperation in the final decades of the last century. During the current decade, however, it has moved away from cooperating with other states in finding new ways to protect the global environment. While its early efforts to address climate change were no worse, and often better than, other developed countries, it has fallen far behind as a number of European states and the European Union have started to implement robust policies to reduce their greenhouse gas emissions. This chapter recounts this evolution in US policy from environmental leader to environmental laggard. It summarizes the US climate change-related policies and diplomacy, recounting significant events during the presidential administrations of George HW Bush, Bill Clinton and George W Bush. It then extends this summary of events to assess the prospects for US climate policy in the near future

Thermoregulated Nitric Cryosystem for Cooling Gas-Filled Detectors of Ionizing Radiation

Directory of Open Access Journals (Sweden)

Zharkov I.P.

2015-09-01

Full Text Available Cryosystem for cooling and filling of gas-filled detectors of ionizing radiation with compressed inert gas on the basis of wide-nitrogen cryostat, which provides detetector temperature control in a range of 173 — 293 K and its stabilization with accuracy of ± 1°. The work was carried out within the Ukraine — NATO Program of Collaboration, Grant SfP #984655.

Electromagnetic radiations from laser interaction with gas-filled Hohlraum

Science.gov (United States)

Yang, Ming; Yang, Yongmei; Li, Tingshuai; Yi, Tao; Wang, Chuanke; Liu, Shenye; Jiang, Shaoen; Ding, Yongkun

2018-01-01

The emission of intensive electromagnetic pulse (EMP) due to laser-target interactions at the ShenGuang-III laser facility has been evaluated by probes. EMP signals measured using the small discone antennas demonstrated two variation trends including a bilateral oscillation wave and a unilateral oscillation wave. The new trend of unilateral oscillation could be attributed to the hohlraum structure and low-Z gas in the hohlraum. The EMP waveform showed multiple peaks when the gas-filled hohlraum was shot by the high-power laser. Comparing the EMP signals with the verification of stimulated Raman scattering energy and hard x-ray energy spectrum, we found that the intensity of EMP signals decreased with the increase of the hohlraum size. The current results are expected to offer preliminary information to study physical processes on laser injecting gas-filled hohlraums in the National Ignition Facility implementation.

Bush telegraph readings in writing

CERN Document Server

Strongman, Luke

2015-01-01

A ""bush telegraph"" is an antipodean slang noun phrase for a ""grapevine"" or an informal network of communication. The title of this book on English language use comes from the fact that the book is written from the southern hemisphere (where the idea of a ""bush telegraph"" is more widely-known) and because the concept of a ""bush telegraph"" describes what the book provides - a discussion of salient points in English language use and tertiary teaching across branches of interrelated interests. Each chapter of Bush Telegraph describes aspects of English writing culture. Separately and toget

Pulse formation of gas-filled counter

International Nuclear Information System (INIS)

Iwatani, Kazuo; Teshima, Kazunori; Shizuma, Kiyoshi; Hasai, Hiromi

1991-01-01

The pulse formation of gas-filled counter has been calculated by simple models for the proportional and self-quenching streamer (SQS) modes. Calculated pulse shapes of counter output have accurately reproduced the observed ones for both modes. As a result, it is shown that the special density distribution of ion pairs in a streamer can be estimated with the rising part of observed pulse shape, using the model. (author)

Low pressure gas filling of laser fusion microspheres

International Nuclear Information System (INIS)

Koo, J.C.; Dressler, J.L.; Hendricks, C.D.

1979-01-01

In our laser fusion microsphere production, large, thin gel-microspheres are formed before the chemicals are fused into glass. In this transient stage,, the gel-microspheres are found to be highly permeable to argon and many other inert gases. When the gel transforms to glass, the argon gas, for example, is trapped within to form argon filled, fusion target quality, glass microspheres. On the average, the partial pressure of the argon fills attained in this process is around 2 x 10 4 Pa at room temperature

Insulation design of cryogenic bushing for superconducting electric power applications

Energy Technology Data Exchange (ETDEWEB)

Koo, J.Y., E-mail: koojy@hanyang.ac.kr [Department of Electronics, Electrical, Control and Instrumentation Engineering, Hanyang University, Ansan 426-791 (Korea, Republic of); Lee, Y.J.; Shin, W.J.; Kim, Y.H. [Department of Electronics, Electrical, Control and Instrumentation Engineering, Hanyang University, Ansan 426-791 (Korea, Republic of); Kim, J.T. [Department of Electrical Engineering, Daejin University, Pocheon 487-711 (Korea, Republic of); Lee, B.W. [Department of Electronics, Electrical, Control and Instrumentation Engineering, Hanyang University, Ansan 426-791 (Korea, Republic of); Lee, S.H., E-mail: k720lsh@kins.re.kr [Expert Group Electric and Control Department, Korea Institute of Nuclear Safety, Daejeon 305-600 (Korea, Republic of)

2013-01-15

Highlights: ► In this paper, design factors of cryogenic bushings were discussed and test results of specimen were introduced in detail. ► We focused on the comparative study of breakdown characteristics of different electrode materials. ► Puncture and creepage breakdown characteristics were analyzed based on the withstand voltage. ► We obtained the basic design factors of extra high voltage condenser bushing. ► We obtained the basic design factors of extra high voltage condenser bushing, which could be used in cryogenic environment. -- Abstract: Recently, the superconductivity projects to develop commercial superconducting devices for extra high voltage transmission lines have been undergoing in many countries. One of the critical components to be developed for high voltage superconducting devices, including superconducting transformers, cables, and fault current limiters, is a high voltage bushing, to supply high current to devices without insulating difficulties, that is designed for cryogenic environments. Unfortunately, suitable bushings for HTS equipment were not fully developed for some cryogenic insulation issues. Such high voltage bushings would need to provide electrical insulation capabilities from room temperature to cryogenic temperatures. In this paper, design factors of cryogenic bushings were discussed and test results of specimen were introduced in detail. First, the dielectric strength of three kinds of metals has been measured with uniform and non-uniform electrodes by withstand voltage of impulse and AC breakdown test in LN{sub 2}. Second, puncture breakdown voltage of glass fiber reinforced plastics (GFRPs) plates has been analyzed with non-uniform electrodes. Finally, creepage discharge voltages were measured according to the configuration of non-uniform and uniform electrode on the FRP plate. From the test results, we obtained the basic design factors of extra high voltage condenser bushing, which could be used in cryogenic

U.S. energy policy and the Bush administration's North American energy strategy

International Nuclear Information System (INIS)

Deutsch, K.

2005-01-01

This presentation outlined the energy policy in the United States and its impact on frontier development in Alaska, deepwater offshore fields and in the western oil shale resources. The energy strategy focuses on technologies that increase domestic production from existing resources as well as technologies that create new sources of energy. In addition to emphasizing the cooperation between Canada and the United States in ensuring energy supply security and stability, this paper discussed the importance of overall bilateral trade between the 2 countries. It was noted that Canada is the United State's most secure and reliable energy partner and is the number 1 supplier of imported oil, natural gas, electricity and uranium. The Bush administration's energy policy is based on the mandate to supply stable, reliable, secure, affordable and environmentally sound energy for the country's growing economy. The energy strategy focuses on increasing energy supplies, promoting energy conservation, repairing and modernizing the energy infrastructure, protecting the environment and improving energy security. Basic changes to the way energy is produced and used will be needed in order to meet these challenges. Energy security can be met through efficiency gains, diversification and use of alternative energy sources. The strategy involves a balance of supply sources, ranging from increasing domestic oil and gas production to such sources as clean coal generation, nuclear power and hydropower. The policy also balances the use of traditional energy sources with renewables such as geothermal, solar, wind and hydrogen. The United States, Canada and Mexico have identified the following 9 areas as critical for interaction on energy: energy data, electricity, regulatory cooperation, energy efficiency, natural gas, oil sands, nuclear and energy science and technology. Construction of the Alaska Natural Gas Pipeline is also one of the Bush administration's highest priorities, along with

Big data integration shows Australian bush-fire frequency is increasing significantly.

Science.gov (United States)

Dutta, Ritaban; Das, Aruneema; Aryal, Jagannath

2016-02-01

Increasing Australian bush-fire frequencies over the last decade has indicated a major climatic change in coming future. Understanding such climatic change for Australian bush-fire is limited and there is an urgent need of scientific research, which is capable enough to contribute to Australian society. Frequency of bush-fire carries information on spatial, temporal and climatic aspects of bush-fire events and provides contextual information to model various climate data for accurately predicting future bush-fire hot spots. In this study, we develop an ensemble method based on a two-layered machine learning model to establish relationship between fire incidence and climatic data. In a 336 week data trial, we demonstrate that the model provides highly accurate bush-fire incidence hot-spot estimation (91% global accuracy) from the weekly climatic surfaces. Our analysis also indicates that Australian weekly bush-fire frequencies increased by 40% over the last 5 years, particularly during summer months, implicating a serious climatic shift.

Metrological and operational performance of measuring systems used in vehicle compressed natural gas filling stations

Energy Technology Data Exchange (ETDEWEB)

Velosa, Jhonn F.; Abril, Henry; Garcia, Luis E. [CDT de GAS (Venezuela). Gas Technological Development Center Corporation

2008-07-01

Corporation CDT GAS financially supported by the Colombian government through COLCIENCIAS, carried out a study aimed at designing, developing and implementing in Colombia a calibration and metrological verification 'specialized service' for gas meters installed at dispensers of filling stations using compressed natural gas. The results permitted the identification of improving opportunities (in measuring systems, equipment and devices used to deliver natural gas) which are focused on achieving the highest security and reliability of trading processes of CNG for vehicles. In the development of the first stage of the project, metrological type variables were initially considered, but given the importance of the measuring system and its interaction with the various elements involving gas supply to the filling station, the scope of the work done included aspects related to the operational performance, that is, those influencing the security of the users and the metrological performance of the measuring system. The development of the second stage counted on the collaboration of national companies from the sector of CNG for vehicles, which permitted the carrying out of multiple calibrations to the measuring systems installed in the CNG dispensers, thus achieving, in a concrete way, valid and reliable technological information of the implemented procedures. (author)

Buoyancy of gas-filled bladders at great depth

Science.gov (United States)

Priede, Imants G.

2018-02-01

At high hydrostatic pressures exceeding 20 MPa or 200 bar, equivalent to depths exceeding ca.2000 m, the behaviour of gases deviates significantly from the predictions of standard equations such as Boyle's Law, the Ideal Gas Law and Van der Waals equation. The predictions of these equations are compared with experimental data for nitrogen, oxygen and air at 0 °C and 15 °C, at pressures up to 1100 bar (110 MPa) equivalent to full ocean depth of ca. 11000 m. Owing to reduced compressibility of gases at high pressures, gas-filled bladders at full ocean depth have a density of 847 kg m-3 for Oxygen, 622 kg m-3 for Nitrogen and 660 kg m-3 for air providing potentially useful buoyancy comparable with that available from man-made materials. This helps explain why some of the deepest-living fishes at ca. 7000 m depth (700 bar or 70 MPa) have gas-filled swim bladders. A table is provided of the density and buoyancy of oxygen, nitrogen and air at 0 °C and 15 °C from 100 to 1100 bar.

Fiber optic gas detection system for health monitoring of oil-filled transformer

Science.gov (United States)

Ho, H. L.; Ju, J.; Jin, W.

2009-10-01

This paper reports the development of a fiber-optic gas detection system capable of detecting three types of dissolved fault gases in oil-filled power transformers or equipment. The system is based on absorption spectroscopy and the target gases include acetylene (C2H2), methane (CH4) and ethylene (C2H4). Low-cost multi-pass sensor heads using fiber coupled micro-optic cells are employed for which the interaction length is up to 4m. Also, reference gas cells made of photonic bandgap (PBG) fiber are implemented. The minimum detectable gas concentrations for methane, acetylene and ethylene are 5ppm, 2ppm and 50ppm respectively.

On-line system on the base of the ELEKTRONIKA D3-28 microcomputer for gas filling

International Nuclear Information System (INIS)

Artemov, A.A.; Baranchuk, N.S.; Livitskij, M.M.; Platonov, V.P.; Chernyak, V.Ya.

1989-01-01

On-line system for gas filling on the base of SNA-1 pressure controller, ELEKTRONIKA D3-28 microcomputer and interface device and program for information exchange within the system are described. The system is designed for on-line measurement of gas pressure and filling and is used during operation without pumping out. Volume of vacuum chamber is 0.8 m 3 , pressure of filled-out gas (nitrogen) is 1 atm. The system enables to change pressure up to 0.1 Torr with 1x10 -4 Torr accuracy. Actuation time of g as filling-on system is determined with program control and depends on pressure measurement. Minimal actuation time of gas filling-on system is determined with program control and depends on pressure measurement. Minimal actuation time is 12 ms

Environmental geophysics at the Southern Bush River Peninsula, Aberdeen Proving Ground, Maryland

Energy Technology Data Exchange (ETDEWEB)

Davies, B.E.; Miller, S.F.; McGinnis, L.D. [and others

1995-05-01

Geophysical studies have been conducted at five sites in the southern Bush River Peninsula in the Edgewood Area of Aberdeen Proving Ground, Maryland. The goals of the studies were to identify areas containing buried metallic objects and to provide diagnostic signatures of the hydrogeologic framework of the site. These studies indicate that, during the Pleistocene Epoch, alternating stands of high and low sea level resulted in a complex pattern of channel-fill deposits. Paleochannels of various sizes and orientations have been mapped throughout the study area by means of ground-penetrating radar and EM-31 techniques. The EM-31 paleochannel signatures are represented onshore either by conductivity highs or lows, depending on the depths and facies of the fill sequences. A companion study shows the features as conductivity highs where they extend offshore. This erosional and depositional system is environmentally significant because of the role it plays in the shallow groundwater flow regime beneath the site. Magnetic and electromagnetic anomalies outline surficial and buried debris throughout the areas surveyed. On the basis of geophysical measurements, large-scale (i.e., tens of feet) landfilling has not been found in the southern Bush River Peninsula, though smaller-scale dumping of metallic debris and/or munitions cannot be ruled out.

Characteristics of Noble Gas-filled Ionization Chambers for a Low Dose Rate Monitoring

International Nuclear Information System (INIS)

Kim, Han Soo; Park, Se Hwan; Ha, Jan Ho; Lee, Jae Hyung; Lee, Nam Ho; Kim, Jung Bok; Kim, Yong Kyun; Kim, Do Hyun; Cho, Seung Yeon

2007-01-01

An ionization chamber is still widely used in fields such as an environmental radiation monitoring, a Radiation Monitoring System (RMS) in nuclear facilities, and an industrial application due to its operational stability for a long period and its designs for its applications. Ionization chambers for RMS and an environmental radiation monitoring are requested to detect a low dose rate at as low as 10-2 mR/h and several 3R/h, respectively. Filling gas and its pressure are two of the important factors for an ionization chamber development to use it in these fields, because these can increase the sensitivity of an ionization chamber. We developed cylindrical and spherical ionization chambers for a low dose rate monitoring. Response of a cylindrical ionization chamber, which has a 1 L active volume, was compared when it was filled with Air, Ar, and Xe gas respectively. Response of a spherical ionization chamber was also compared in the case of 9 atm and 25 atm filling-pressures. An inter-comparison with a commercially available high pressure Ar ionization chamber and a fabricated ionization chamber was also performed. A High Pressure Xenon (HPXe) ionization chamber, which was configured with a shielding mesh to eliminate an induced charge of positive ions, was fabricated both for the measurement of an environmental dose rate and for the measurement of an energy spectrum

Low-Cost Production of Composite Bushings for Jet Engine Applications

Science.gov (United States)

Gray, Robert A.

1998-01-01

The objectives of this research program were to reduce the manufacturing costs of variable stator vane bushings by 1) eliminating the expensive carbon fiber braiding operation, 2) replacing the batch mode impregnation, B-stage, and cutting operations with a continuous process, and 3) reducing the molding cycle and machining operations with injection molding to achieve near-net shapes. Braided bushings were successfully fabricated with both AMB-17XLD and AMB-TPD resin systems. The composite bushings achieved high glass transition temperature after post-cure (+300 C) and comparable weight loss to the PNM-15 bushings. ANM-17XLD bushings made with "batch-mode" molding compound (at 0.5 in. fiber length) achieved a +300 lb-force flange break strength which was superior to the continuous braided-fiber reinforced bushing. The non-MDA resin technology developed in this contract appears attractive for bushing applications that do not exceed a 300 C use temperature. Two thermoplastic polyimide resins were synthesized in order to generate injection molding compound powders. Excellent processing results were obtained at injection temperatures in excess of 300 C. Micro-tensile specimens were produced from each resin type and the Tg measurements (by TMA) for these samples were equivalent to AURUM(R). Thermal Gravimetric Analysis (TGA) conducted at 10 C/min showed that the non-MDA AMB-type polyimide thermoplastics had comparable weight loss to PMR-15 up to 500 C.

High-density carbon ablator ignition path with low-density gas-filled rugby hohlraum

International Nuclear Information System (INIS)

Amendt, Peter; Ho, Darwin D.; Jones, Ogden S.

2015-01-01

A recent low gas-fill density (0.6 mg/cc 4 He) cylindrical hohlraum experiment on the National Ignition Facility has shown high laser-coupling efficiency (>96%), reduced phenomenological laser drive corrections, and improved high-density carbon capsule implosion symmetry [Jones et al., Bull. Am. Phys. Soc. 59(15), 66 (2014)]. In this Letter, an ignition design using a large rugby-shaped hohlraum [Amendt et al., Phys. Plasmas 21, 112703 (2014)] for high energetics efficiency and symmetry control with the same low gas-fill density (0.6 mg/cc 4 He) is developed as a potentially robust platform for demonstrating thermonuclear burn. The companion high-density carbon capsule for this hohlraum design is driven by an adiabat-shaped [Betti et al., Phys. Plasmas 9, 2277 (2002)] 4-shock drive profile for robust high gain (>10) 1-D ignition performance and large margin to 2-D perturbation growth

High-density carbon ablator ignition path with low-density gas-filled rugby hohlraum

Science.gov (United States)

Amendt, Peter; Ho, Darwin D.; Jones, Ogden S.

2015-04-01

A recent low gas-fill density (0.6 mg/cc 4He) cylindrical hohlraum experiment on the National Ignition Facility has shown high laser-coupling efficiency (>96%), reduced phenomenological laser drive corrections, and improved high-density carbon capsule implosion symmetry [Jones et al., Bull. Am. Phys. Soc. 59(15), 66 (2014)]. In this Letter, an ignition design using a large rugby-shaped hohlraum [Amendt et al., Phys. Plasmas 21, 112703 (2014)] for high energetics efficiency and symmetry control with the same low gas-fill density (0.6 mg/cc 4He) is developed as a potentially robust platform for demonstrating thermonuclear burn. The companion high-density carbon capsule for this hohlraum design is driven by an adiabat-shaped [Betti et al., Phys. Plasmas 9, 2277 (2002)] 4-shock drive profile for robust high gain (>10) 1-D ignition performance and large margin to 2-D perturbation growth.

High-density carbon ablator ignition path with low-density gas-filled rugby hohlraum

Energy Technology Data Exchange (ETDEWEB)

Amendt, Peter; Ho, Darwin D.; Jones, Ogden S. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States)

2015-04-15

A recent low gas-fill density (0.6 mg/cc {sup 4}He) cylindrical hohlraum experiment on the National Ignition Facility has shown high laser-coupling efficiency (>96%), reduced phenomenological laser drive corrections, and improved high-density carbon capsule implosion symmetry [Jones et al., Bull. Am. Phys. Soc. 59(15), 66 (2014)]. In this Letter, an ignition design using a large rugby-shaped hohlraum [Amendt et al., Phys. Plasmas 21, 112703 (2014)] for high energetics efficiency and symmetry control with the same low gas-fill density (0.6 mg/cc {sup 4}He) is developed as a potentially robust platform for demonstrating thermonuclear burn. The companion high-density carbon capsule for this hohlraum design is driven by an adiabat-shaped [Betti et al., Phys. Plasmas 9, 2277 (2002)] 4-shock drive profile for robust high gain (>10) 1-D ignition performance and large margin to 2-D perturbation growth.

Bush Pledges Increased Science Research and Education Funding

Science.gov (United States)

Kumar, Mohi

2006-02-01

In his 31 January State of the Union address, U.S. President George W. Bush announced two new initiatives aimed at galvanizing scientific research and education. For the American Competitiveness Initiative, Bush proposes to ``double the federal commitment to the most critical basic research programs in the physical sciences in the next 10 years. . .[and to] make permanent the research and development tax credit to encourage bolder private-sector initiative in technology.''

THEORETICAL GAS CONCENTRATIONS ACHIEVING 100% FILL OF THE VITREOUS CAVITY IN THE POSTOPERATIVE PERIOD: A Gas Eye Model Study.

Science.gov (United States)

Williamson, Tom H; Guillemaut, Jean-Yves; Hall, Sheldon K; Hutter, Joseph C; Goddard, Tony

2017-12-11

To determine the concentrations of different gas tamponades in air to achieve 100% fill of the vitreous cavity postoperatively and to examine the influence of eye volume on these concentrations. A mathematical model of the mass transfer dynamics of tamponade and blood gases (O2, N2, and CO2) when injected into the eye was used. Mass transfer surface areas were calculated from published anatomical data. The model has been calibrated from published volumetric decay and composition results for three gases sulphahexafluoride (SF6), hexafluoroethane (C2F6), or perfluoropropane (C3F8). The concentrations of these gases (in air) required to achieve 100% fill of the vitreous cavity postoperatively without an intraocular pressure rise were determined. The concentrations were calculated for three volumes of the vitreous cavity to test whether ocular size influenced the results. A table of gas concentrations was produced. In a simulation of pars plana vitrectomy operations in which an 80% to 85% fill of the vitreous cavity with gas was achieved at surgery, the concentrations of the 3 gases in air to achieve 100% fill postoperatively were 10% to 13% for C3F8, 12% to 15% for C2F6, and 19% to 25% for SF6. These were similar to the so-called "nonexpansive" concentrations used in the clinical setting. The calculations were repeated for three different sizes of eye. Aiming for an 80% fill at surgery and 100% postoperatively, an eye with a 4-mL vitreous cavity required 24% SF6, 15% C2F6, or 13% C3F8; 7.2 mL required 25% SF6, 15% C2F6, or 13% C3F8; and 10 mL required 25% SF6, 16% C2F6, or 13% C3F8. When using 100% gas (e.g., used in pneumatic retinopexy), to achieve 100% fill postoperatively, the minimum vitreous cavity fill at surgery was 43% for SF6, 29% for C2F6, and 25% for C3F8 and was only minimally changed by variation in the size of the eye. A table has been produced, which could be used for surgical innovation in gas usage in the vitreous cavity. It provides concentrations

Improvement in the heat transfer of a gas filled thermal switch

International Nuclear Information System (INIS)

Yamamoto, J.

1984-01-01

This chapter attempts to clarify the heat transfer mechanism of a gas filled stainless steel tube, and shows how the maximum heat transfer rate is determined under various filling pressures. The thermal switch is a convenient device for a thermal link between the cold heat of a cryocooler and a magnet dewar, because the switch acts as an active thermal conductor at the precooling stage and as an insulator after collecting liquid helium in the dewar. Topics considered include the switch structure, the heat transfer process, the delay of condensation, and the precooling stage and switching. It is determined that the heat transfer mechanism of the gas filled switch is due to normal nucleate boiling at the bottom and condensation on the upper cone. The higher the initial pressure, the larger the maximum heat flow obtained. Evaporation and condensation surfaces play an important role in the heat transfer rate

Multiple soliton compression stages in mid-IR gas-filled hollow-core fibers

DEFF Research Database (Denmark)

Habib, Md Selim; Markos, Christos; Bang, Ole

2017-01-01

The light confinement inside hollow-core (HC) fibers filled with noble gases constitutes an efficient route to study interesting soliton-plasma dynamics [1]. More recently, plasma-induced soliton splitting at the self-compression point was observed in a gas-filled fiber in the near-IR [2]. However...

Radionuclide analysis of bush food

International Nuclear Information System (INIS)

Koperski, J.; Bywater, J.

1985-01-01

A model diet for an Aboriginal adult living entirely on bush foods collected from the Alligator Rivers Region of the Northern Territory has been established. Results of investigations of the specific activities of thorium-230, radium-226, lead-210 and polonium-210 in 123 samples of bush foods collected by Ranger Uranium Mines Pty Ltd during pre-production and production periods are presented. For all the investigated bush food items, excluding freshwater mussels (Velesunio angasi), no systematic differences were found between the specific activities of the radionuclides monitored in food items sampled during preproduction and production periods. Preliminary estimates of annual effective dose equivalent (DE) rates for stochastic effects on an adult living entirely on the model bush diet are presented. Of the four radionuclides monitored the major contributor to the effective DE rates appears to be lead-210 followed by radium-226. Among the selected nine components of the diet the major contributor to the effective DE rates appear to be mussels, water lilies and fish

Radionuclide analysis of bush food

Energy Technology Data Exchange (ETDEWEB)

Koperski, J; Bywater, J [Ranger Uranium Mines Proprietary Ltd., Chatswood (Australia)

1985-04-01

A model diet for an Aboriginal adult living entirely on bush foods collected from the Alligator Rivers Region of the Northern Territory has been established. Results of investigations of the specific activities of thorium-230, radium-226, lead-210 and polonium-210 in 123 samples of bush foods collected by Ranger Uranium Mines Pty. Ltd. during pre-production and production periods are presented. For all the investigated bush food items, excluding freshwater mussels (Velesunio angasi), no systematic differences were found between the specific activities of the radionuclides monitored in food items sampled during preproduction and production periods. Preliminary estimates of annual effective dose equivalent (DE) rates for stochastic effects on an adult living entirely on the model bush diet are presented. Of the four radionuclides monitored the major contributor to the effective DE rates appears to be lead-210 followed by radium-226. Among the selected nine components of the diet the major contributor to the effective DE rates appear to be mussels, water lilies and fish.

Improving methane gas sensing properties of multi-walled carbonnanotubes by vanadium oxide filling

CSIR Research Space (South Africa)

Chimowa, George

2017-08-01

Full Text Available Manipulation of electrical properties and hence gas sensing properties of multi-walled carbon nanotubes (MWNTs) by filling the inner wall with vanadium oxide is presented. Using a simple capillary technique, MWNTs are filled with vanadium metal...

Instrument for detecting gas bubbles in sodium filled pipework

Energy Technology Data Exchange (ETDEWEB)

Stapleton, D

1973-08-01

An instrument employing an electromagnetic sensor is described. Gas bubbles down to 0.5 mm diameter can be detected in sodium filled pipework of 1 in. nominal bore at temperatures up to 400 deg C. Installation of the sensing head involves no break in the integrity of the pipework. Facilities to enable bubble size discrimination, bubble counting and timing pulse generation are provided in the signal processing unit. Initial operating experience has been gained on a sodium loop used for gas entrainment studies. (auth)

Pressure regulation system for modern gas-filled detectors

International Nuclear Information System (INIS)

McDonald, R.J.

1986-08-01

A gas pressure and flow regulation system has been designed and constructed to service a wide variety of gas-filled detectors which operate at pressures of ∼2 to 1000 Torr and flow rate of ∼5 to 200 standard cubic centimeters per minute (sccm). Pressure regulation is done at the detector input by a pressure transducer linked to a solenoid leak valve via an electronic control system. Gas flow is controlled via a mechanical leak valve at the detector output. Interchangeable transducers, flowmeters, and leak valves allow for different pressure and flow ranges. The differential pressure transducer and control system provide automatic let-up of vacuum chambers to atmospheric pressure while maintaining a controlled overpressure in the detector. The gas system is constructed on a standard 19'' rack-mounted panel from commercially available parts. Five of these systems have been built and are routinely used for both ionization chambers and position-sensitive avalanche detectors

Modeling of filling gas centrifuge cascade for nickel isotope separation by feed flow input to different stages

Directory of Open Access Journals (Sweden)

Orlov Alexey A.

2017-01-01

Full Text Available The article presents results of research filling gas centrifuge cascade by process gas fed into different stages. The modeling of filling cascade was done for nickel isotope separation. Analysis of the research results shows that nickel isotope concentrations of light and heavy fraction flows after filling cascade depend on feed stage number.

Environmental Impact Assessment of Petrol and Gas Filling Stations ...

African Journals Online (AJOL)

This study investigated pollutants emissions from filling stations and their impact on the air quality. Gas monitors were employed to identify the different pollutants present in the ambient air of the study areas. The results showed that the most prominent pollutants present in the ambient air are the volatile organic compounds ...

Physiological and behavioral responses of poultry exposed to gas-filled high expansion foam.

Science.gov (United States)

McKeegan, D E F; Reimert, H G M; Hindle, V A; Boulcott, P; Sparrey, J M; Wathes, C M; Demmers, T G M; Gerritzen, M A

2013-05-01

Disease control measures require poultry to be killed on farms to minimize the risk of disease being transmitted to other poultry and, in some cases, to protect public health. We assessed the welfare implications for poultry of the use of high-expansion gas-filled foam as a potentially humane, emergency killing method. In laboratory trials, broiler chickens, adult laying hens, ducks, and turkeys were exposed to air-, N2-, or CO2-filled high expansion foam (expansion ratio 300:1) under standardized conditions. Birds were equipped with sensors to measure cardiac and brain activity, and measurements of oxygen concentration in the foam were carried out. Initial behavioral responses to foam were not pronounced but included headshakes and brief bouts of wing flapping. Both N2- and CO2-filled foam rapidly induced ataxia/loss of posture and vigorous wing flapping in all species, characteristic of anoxic death. Immersion in air-filled, high expansion foam had little effect on physiology or behavior. Physiological responses to both N2- and CO2-filled foam were characterized by a pronounced bradyarrythymia and a series of consistent changes in the appearance of the electroencephalogram. These were used to determine an unequivocal time to loss of consciousness in relation to submersion. Mean time to loss of consciousness was 30 s in hens and 18 s in broilers exposed to N2-filled foam, and 16 s in broilers, 1 s in ducks, and 15 s in turkeys exposed to CO2-filled foam. Euthanasia achieved with anoxic foam was particularly rapid, which is explained by the very low oxygen concentrations (below 1%) inside the foam. Physiological observations and postmortem examination showed that the mode of action of high expansion, gas-filled foam is anoxia, not occlusion of the airway. These trials provide proof-of-principle that submersion in gas-filled, high expansion foam provides a rapid and highly effective method of euthanasia, which may have potential to provide humane emergency killing

Thermal behaviour of high burnup PWR fuel under different fill gas conditions

International Nuclear Information System (INIS)

Tverberg, T.

2001-01-01

During its more than 40 years of existence, a large number of experiments have been carried out at the Halden Reactor Project focusing on different aspects related to nuclear reactor fuel. During recent years, the fuels testing program has mainly been focusing on aspects related to high burnup, in particular in terms of fuel thermal performance and fission gas release, and often involving reinstrumentation of commercially irradiated fuel. The paper describes such an experiment where a PWR rod, previously irradiated in a commercial reactor to a burnup of ∼50 MWd/kgUO 2 , was reinstrumented with a fuel central oxide thermocouple and a cladding extensometer together with a high pressure gas flow line, allowing for different fill gas compositions and pressures to be applied. The paper focuses on the thermal behaviour of such LWR rods with emphasis on how different fill gas conditions influence the fuel temperatures and gap conductance. Rod growth rate was also monitored during the irradiation in the Halden reactor. (author)

Ultrafast Mid-IR Nonlinear Optics in Gas-filled Hollow-core Photonic Crystal Fibers

DEFF Research Database (Denmark)

Habib, Selim

Invention of hollow-core fiber has been proven an ideal medium to study light-gas interaction. Tight confinement of light inside hollowcore fiber allows unremitting and tailored interaction between light and gas over long distances. In this work, we used a special kind of hollowcore fiber − hollow......-core anti-resonant (HC-AR) fiber to study the various nonlinear effects filled with Raman free noble gas. One of the main striking features of HC-AR fiber is that ∼99.99% light can be guided inside the central hollow-core region, which significantly enhances damage threshold level. HC-AR fiber can sustain...... be tuned by simply changing the pressure of the gas while at the same time providing extremely wide transparency ranges. In this thesis, we propose several low-loss broadband guidance HC-AR fibers and investigate soliton-plasma dynamics using HC-AR fiber filled with noble gas in the mid-IR. The combined...

Test facility for fast gas injections into a vessel filled with water

International Nuclear Information System (INIS)

Wilhelm, D.; Kirstahler, M.

1987-11-01

The Fast Gas Injection Facility (SGI) was set up to study the hydrodynamics during the expansion of a gas bubble into a vessel filled with water. The gas stored in a pressure vessel expands against gravity through a circular duct into a large cylindrical vessel partly with water. This report covers the description of the test facility and the data acquisition. Results of the first test series are added. (orig.) [de

A Concept for a Low Pressure Noble Gas Fill Intervention in the IFE Fusion Test Facility (FTF) Target Chamber

International Nuclear Information System (INIS)

Gentile, C.A.; Blanchard, W.R.; Kozub, T.A.; Aristova, M.; McGahan, C.; Natta, S.; Pagdon, K.; Zelenty, J.

2010-01-01

wall acts as the primary heat exchanger. During removal, gas is pumped through the laser ports by turbo molecular-drag pumps (TM-DP). For the purpose of reducing organic based lubricants and seals, a magnetically levitated TM-DP is being investigated with pump manufacturers. Currently, magnetically levitated turbo molecular pumps are commercially available. The pumps will be exposed to thermal loads and ionizing radiation (tritium, Ar-41, post detonation neutrons). Although the TM-DP's will be subjected to these various radiations, current designs for similar pumping devices have been hardened and have the ability of locating control electronics in remote radiation shielded enclosures4. The radiation hardened TM-DP's will be 5 required to operate with minimal maintenance for periods of up to 18 continuous months. As part of this initial investigation for developing a conceptual engineering strategy for a gas fill solution, commercial suppliers of low pressure gas pumping systems have been contacted and engaged in this evaluation. Current technology in the area of mechanical pumping systems indicates that the development of a robust pumping system to meet the requirements of the FTF gas fill concept is within the limits of COTS equipment3,4.

Amplification of spontaneous emission of neon-like argon in a fast gas-filled capillary discharge

International Nuclear Information System (INIS)

Kolacek, K.; Schmidt, J.; Bohacek, V.; Ripa, M.; Frolov, O.; Vrba, P.; Straus, J.; Prukner, V.; Rupasov, A. A.; Shikanov, A. S.

2008-01-01

The evolution of the CAPEX facility and its basic diagnostics are described. The experiments carried out in the last modification of this facility accomplished with the demonstration of amplified spontaneous emission of neon-like argon (Ar 8+ ) at the wavelength 46.88 nm. The first version of the facility, CAPEX1, operated with a plastic capillary and had a short high-power passive prepulse and an imperfect gas-filling system. In the second version, CAPEX2, a ceramic capillary was used, the prepulse amplitude was lowered, and the gas-filling system was improved. In the third, most successful version, CAPEX3, the capillary bending was reduced, a longer external prepulse was used, and the gas-filling system was further optimized. For each version, results of X-ray measurements are presented and interpreted

Angle-resolved photoemission spectroscopy with 9-eV photon-energy pulses generated in a gas-filled hollow-core photonic crystal fiber

OpenAIRE

Bromberger, H.; Ermolov, A.; Belli, F.; Liu, H.; Calegari, F.; Chavez-Cervantes, M.; Li, M. T.; Lin, C. T.; Abdolvand, A.; Russell, P. St. J.; Cavalleri, A.; Travers, J. C.; Gierz, I.

2015-01-01

A recently developed source of ultraviolet radiation, based on optical soliton propagation in a gas-filled hollow-core photonic crystal fiber, is applied here to angle-resolved photoemission spectroscopy (ARPES). Near-infrared femtosecond pulses of only few {\\mu}J energy generate vacuum ultraviolet (VUV) radiation between 5.5 and 9 eV inside the gas-filled fiber. These pulses are used to measure the band structure of the topological insulator Bi2Se3 with a signal to noise ratio comparable to ...

Portable optical frequency standard based on sealed gas-filled hollow-core fiber using a novel encapsulation technique

DEFF Research Database (Denmark)

Triches, Marco; Brusch, Anders; Hald, Jan

2015-01-01

A portable stand-alone optical frequency standard based on a gas-filled hollow-core photonic crystal fiber is developed to stabilize a fiber laser to the 13C2H2 P(16) (ν1 + ν3) transition at 1542 nm using saturated absorption. A novel encapsulation technique is developed to permanently seal...

Conductive core of radiation-resistant high-pressure electric bushing, especially for nuclear technology

International Nuclear Information System (INIS)

Zajic, V.

1981-01-01

A radiation-resistant high-pressure electric bushing was developed featuring a conductive core consisting of a hollow moulding. At the point of attachment to the bushing insulator the core moulding is widened, thus forming a ring support of a diameter larger by at least 10% than the diameter of the conductive core cylindrical section. On the outer side of the pressure body the core cavity is narrowed and tightly closed with the conductor. On the side facing the medium of higher pressure, the conductive core is provided with a thread. Core manufacture and connection of the conductor to the bushing is very simple. The bushing can be used for an environment with pressures exceeding 10 MPa. (J.B.)

Conductive core of radiation-resistant high-pressure electric bushing, especially for nuclear technology

Energy Technology Data Exchange (ETDEWEB)

Zajic, V

1981-09-01

A radiation-resistant high-pressure electric bushing was developed featuring a conductive core consisting of a hollow moulding. At the point of attachment to the bushing insulator the core moulding is widened, thus forming a ring support of a diameter larger by at least 10% than the diameter of the conductive core cylindrical section. On the outer side of the pressure body the core cavity is narrowed and tightly closed with the conductor. On the side facing the medium of higher pressure, the conductive core is provided with a thread. Core manufacture and connection of the conductor to the bushing is very simple. The bushing can be used for an environment with pressures exceeding 10 MPa.

High Throughput Phenotyping of Blueberry Bush Morphological Traits Using Unmanned Aerial Systems

Directory of Open Access Journals (Sweden)

Aaron Patrick

2017-12-01

Full Text Available Phenotyping morphological traits of blueberry bushes in the field is important for selecting genotypes that are easily harvested by mechanical harvesters. Morphological data can also be used to assess the effects of crop treatments such as plant growth regulators, fertilizers, and environmental conditions. This paper investigates the feasibility and accuracy of an inexpensive unmanned aerial system in determining the morphological characteristics of blueberry bushes. Color images collected by a quadcopter are processed into three-dimensional point clouds via structure from motion algorithms. Bush height, extents, canopy area, and volume, in addition to crown diameter and width, are derived and referenced to ground truth. In an experimental farm, twenty-five bushes were imaged by a quadcopter. Height and width dimensions achieved a mean absolute error of 9.85 cm before and 5.82 cm after systematic under-estimation correction. Strong correlation was found between manual and image derived bush volumes and their traditional growth indices. Hedgerows of three Southern Highbush varieties were imaged at a commercial farm to extract five morphological features (base angle, blockiness, crown percent height, crown ratio, and vegetation ratio associated with cultivation and machine harvestability. The bushes were found to be partially separable by multivariate analysis. The methodology developed from this study is not only valuable for plant breeders to screen genotypes with bush morphological traits that are suitable for machine harvest, but can also aid producers in crop management such as pruning and plot layout organization.

Prototype high voltage bushing: Configuration to its operational demonstration

Energy Technology Data Exchange (ETDEWEB)

Shah, Sejal, E-mail: sshah@iter-india.org [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar 382428 (India); Sharma, D. [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India); Parmar, D.; Tyagi, H.; Joshi, K.; Shishangiya, H.; Bandyopadhyay, M.; Rotti, C.; Chakraborty, A. [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar 382428 (India)

2016-12-15

High Voltage Bushing (HVB) is the key component of Diagnostic Neutral Beam (DNB) system of ITER as it provides access to high voltage electrical, hydraulic, gas and diagnostic feedlines to the beam source with isolation from grounded vessel. HVB also provides primary vacuum confinement for the DNB system. Being Safety Important Class (SIC) component of ITER, it involves several configurational, technological and operational challenges. To ensure its operational performance & reliability, particularly electrostatic behavior, half scale down Prototype High Voltage Bushing (PHVB) is designed considering same design criteria of DNB HVB. Design optimization has been carried out followed by finite element (FE) analysis to obtain DNB HVB equivalent electric stress on different parts of PHVB, taking into account all design, manufacturing & space constraints. PHVB was tested up to 60 kV without breakdown, which validates its design for the envisaged operation of 50 kV DC. This paper presents the design of PHVB, FEA validation, manufacturing constraints, experimental layout with interfacing auxiliary systems and operational results related to functional performance.

ACHP | News | Laura Bush Announces Preserve America Grants Budget

Science.gov (United States)

Search skip specific nav links Home arrow News arrow Laura Bush Announces Preserve America Grants Budget Laura Bush Announces Preserve America Grants Budget First Preserve America Communities Also Announced ) Jan. 15, 2004, Washington, DC—Mrs. Laura Bush announced today that the President's budget for FY 2005

Modelling of HVDC wall bushing flashover in nonuniform rain

International Nuclear Information System (INIS)

Rizk, F.A.M.; Kamel, S.I.

1991-01-01

This paper presents the first mathematical model to provide necessary and sufficient conditions for flashover of an HVDC wall bushing under nonuniform rain. The suggested mechanism is initiated by streamer bridging of the dry zone enhanced by nonuniform voltage distribution along the bushing and within the dry zone. Fast voltage collapse across the dry zone die to energy stored in the bushing stray capacitance to ground leads to impulsive stressing of the wet part of the bushing. The nonuniform distribution of the impulse stress and the process of streamer bridging, fast voltage collapse as well as subsequent recharging of the bushing capacitances can lead to continued discharge propagation and flashover of the complete bushing. The findings of the model have been satisfactorily compared with previous experiments and field observations and can, for the first time, account for the following aspects of the flashover mechanism: critical dry zone length, polarity effect, specific leakage path, wet layer conductance per unit leakage length as well as the DC system voltage

Vannevar Bush: Fifty Years Later

Science.gov (United States)

Lagowski, J. J.

1995-12-01

It is ironic that the 50th anniversary year of Vannevar Bush's Report to President Truman entitled "Science the Endless Frontier", which put into motion the eminently successful current system of education of scientists in this country occurs at a time when serious questions are being asked about the usefulness of that very system. Bush viewed his proposal to establish a national research foundation (later to be called the National Science Foundation) as a "social compact." Judgment of scientific merit would be delegated to expert peers in return for scientific progress, which would ultimately benefit the nation in terms of scientific needs--military security, economic productivity, and enhanced quality of life. Bush wanted the funding of basic research intertwined with training, and preferred to use universities for this purpose rather than industrial or national labs. Bush viewed college and university scientists as teachers and investigators. He believed university-based research would uniquely encourage and engage the next generation of scientists as no other institutional arrangement could. Bush did not trust industry's commitment to basic research, an instinct that proved prophetic. The academic reserve of scientists (PhD's in training and postdoctoral students) that existed before World War II, and upon which the United States could draw for its needs, which were primarily associated with defense efforts, was probably one of the defining factors in Bush's suggested strategy. Currently, that reserve of talent has gotten so large that it is the obvious throttle in the pipeline slowing the continued development of the university research enterprise. Since 1977, the rate at which we have trained new scientists exceeds an average of 4% annually. Since 1987, the "science work force"--PhD's--has grown at three times the rate of the general labor supply. Temporary positions for postdoctoral scientists have grown even faster (over 5% per year since 1989). To compound

Control of Butterfly Bush with Postemergence Herbicides

Science.gov (United States)

Butterfly bush (Buddleja davidii) is classified as invasive in several parts of the United States. Two experiments were conducted to evaluate the effectiveness of four herbicides and two application methods on postemergence butterfly bush control. The four herbicides included: Roundup (glyphosate)...

Bush and the Energy; Bush et l'energie

Energy Technology Data Exchange (ETDEWEB)

Mommaerts, C.; Barre, N.; Riche, P

2001-07-01

Facing the increase of the energy demand, Bush the President of the USA, decided to give a new impetus to the nuclear industry. These papers present the economic and the political analysis of this policy from the french point of view showing the anxiety facing the environmental impacts. (A.L.B.)

Signal-Pressure Curves of Cascaded Four-Wave Mixing in Gas-Filled Capillary by fs Pulses

International Nuclear Information System (INIS)

Chen Baozhen; Huang Zuqia

2005-01-01

The theoretical framework for the cascaded four waves mixing (CFWM) in gas-filled capillary by fs pulses is constructed. Based on the theoretical framework, the signal-pressure curves (SPC) of the CFWM in gas-filled capillary by fs pulses are calculated. With a comparison between the theoretical and experimental SPC we have discussed the influence of the walk-off and phase modulation on the SPC. At the same time, we have discussed the possible origin of the first three peaks of the SPC.

Experience with on-line diagnostics for bushings and current transformers

Energy Technology Data Exchange (ETDEWEB)

Brusetti, R.

2004-02-01

The application of on-line diagnostic techniques is advocated as an alternative, under certain conditions, for the conventional off-line power factor test used to evaluate the condition of bushings and current transformers. Bushings which are tied to critical system apparatus or which cannot be readily removed from service are considered to be excellent candidates for on-line diagnostics. A case history involving 138-KV bushings is used to demonstrate the value of the on-line diagnostic system which, by taking into account power factor capacitance values along with the rate of change, not only detected the high power factor associated with the bushings, but allowed the high power factor bushings to continue operating with a known problem for over a year. With conventional testing, bushings that exhibited this level of power factor would typically be removed from service. 4 refs., 3 figs.

Development of a selective thin film and of a hermetically sealed flat plate solar collector with gas filling

Science.gov (United States)

Zernial, W.

1982-12-01

The industrial productibility of a selective absorbing thin film was investigated on the basis of reactive cathodic sputtering of Ni. On substrates of 1.8 sq m of Al, Cu, steel and stainless steel, solar absorption values up to 97% were achieved at emissivities of 5 to 10%. A prototype flat plate collector for high temperatures with two covers and hermetical sealing was developed. The technical data of the collector were measured, dependent on the selectivity of the absorber, gas fillings of dry air, argon or SF6 and the geometry and were compared with those of an evacuated flat plate collector. A hermetical sealed double flat plate collector for low temperatures was developed which has the advantage of lower no load temperatures and higher energy gain for heating swimming pool water compared with a conventional flat plate collector. The insolation values on collectors were measured and were used for a calculation of the energy gains of different collector types.

Electrical bushing for a superconductor element

Science.gov (United States)

Mirebeau, Pierre; Lallouet, Nicolas; Delplace, Sebastien; Lapierre, Regis

2010-05-04

The invention relates to an electrical bushing serving to make a connection at ambient temperature to a superconductor element situated in an enclosure at cryogenic temperature. The electrical bushing passes successively through an enclosure at intermediate temperature between ambient temperature and cryogenic temperature, and an enclosure at ambient temperature, and it comprises a central electrical conductor surrounded by an electrically insulating sheath. According to the invention, an electrically conductive screen connected to ground potential surrounds the insulating sheath over a section that extends from the end of the bushing that is in contact with the enclosure at cryogenic temperature at least as far as the junction between the enclosure at intermediate temperature and the enclosure at ambient temperature. The invention is more particularly applicable to making a connection to a superconductor cable.

Gas tagging system development in Japan

International Nuclear Information System (INIS)

Sekiguchi, N.; Rindo, H.; Akiyama, T.; Miyazawa, T.; Heki, H.

1981-05-01

The Gas tagging method has been considered to be most desirable for a failed fuel location system for the fast breeder reactor, regarding the component reduction in the reactor vessel and rapid location during reactor operation. The gas tagging system has been designed by referring to R and D results obtained in Japan and other countries. The designed system is comprised of tag gas filling pins, cover gas sampling system, tag gas recovery and enrichment system, tag gas analyzer and system control and data handling computers. The main specifications for this system have been decided as follows; 1) Main function is location of failed fuels in core and a part of blanket region, 2) Identification capability is each subassembly, 3) Time for identification is within a few days, 4) Continuous operation with automatic start at fuel failure, 5) Detection sensitivity must cover both gas leak and pin burst. In designing the gas tagging system, the following R and D items were selected; 1) System design study, 2) Tag gas capsule development, 3) Modeling the tag gas behavior in reactor primary cooling system, 4) Tag gas recovery and enrichment system, 5) Computer code development for tag gas isotope ratio change estimation. Details of the Japanese gas tagging system development appear in this paper. (author)

Hybrid neural network bushing model for vehicle dynamics simulation

International Nuclear Information System (INIS)

Sohn, Jeong Hyun; Lee, Seung Kyu; Yoo, Wan Suk

2008-01-01

Although the linear model was widely used for the bushing model in vehicle suspension systems, it could not express the nonlinear characteristics of bushing in terms of the amplitude and the frequency. An artificial neural network model was suggested to consider the hysteretic responses of bushings. This model, however, often diverges due to the uncertainties of the neural network under the unexpected excitation inputs. In this paper, a hybrid neural network bushing model combining linear and neural network is suggested. A linear model was employed to represent linear stiffness and damping effects, and the artificial neural network algorithm was adopted to take into account the hysteretic responses. A rubber test was performed to capture bushing characteristics, where sine excitation with different frequencies and amplitudes is applied. Random test results were used to update the weighting factors of the neural network model. It is proven that the proposed model has more robust characteristics than a simple neural network model under step excitation input. A full car simulation was carried out to verify the proposed bushing models. It was shown that the hybrid model results are almost identical to the linear model under several maneuvers

Effect of gas filling pressure and operation energy on ion and neutron emission in a medium energy plasma focus device

Science.gov (United States)

Niranjan, Ram; Rout, R. K.; Srivastava, Rohit; Kaushik, T. C.

2018-03-01

The effects of gas filling pressure and operation energy on deuterium ions and neutrons have been studied in a medium energy plasma focus device, MEPF-12. The deuterium gas filling pressure was varied from 1 to 10 mbar at an operation energy of 9.7 kJ. Also, the operation energy was varied from 3.9 to 9.7 kJ at a deuterium gas filling pressure of 4 mbar. Time resolved emission of deuterium ions was measured using a Faraday cup. Simultaneously, time integrated and time resolved emissions of neutrons were measured using a silver activation detector and plastic scintillator detector, respectively. Various characteristics (fluence, peak density, and most probable energy) of deuterium ions were estimated using the Faraday cup signal. The fluence was found to be nearly independent of the gas filling pressure and operation energy, but the peak density and most probable energy of deuterium ions were found to be varying. The neutron yield was observed to be varying with the gas filling pressure and operation energy. The effect of ions on neutrons emission was observed at each operation condition.

High pressure gas-filled cermet spark gaps

International Nuclear Information System (INIS)

Avilov, Eh.A.; Yur'ev, A.L.

2000-01-01

The results of modernization of the R-48 and R-49 spark gaps making it possible to improve their electrical characteristics are presented. The design is described and characteristics of gas-filled cermet spark gaps are presented. By the voltage rise time of 5-6 μs in the Marx generator scheme they provide for the pulse break-through voltage of 120 and 150 kV. By the voltage rise time of 0.5-1 μs the break-through voltage of these spark gaps may be increased up to 130 and 220 kV. The proper commutation time is equal to ≤ 0.5 ns. Practical recommendations relative to designing cermet spark gaps are given [ru

Angle-resolved photoemission spectroscopy with 9-eV photon-energy pulses generated in a gas-filled hollow-core photonic crystal fiber

Science.gov (United States)

Bromberger, H.; Ermolov, A.; Belli, F.; Liu, H.; Calegari, F.; Chávez-Cervantes, M.; Li, M. T.; Lin, C. T.; Abdolvand, A.; Russell, P. St. J.; Cavalleri, A.; Travers, J. C.; Gierz, I.

2015-08-01

A recently developed source of ultraviolet radiation, based on optical soliton propagation in a gas-filled hollow-core photonic crystal fiber, is applied here to angle-resolved photoemission spectroscopy (ARPES). Near-infrared femtosecond pulses of only few μJ energy generate vacuum ultraviolet radiation between 5.5 and 9 eV inside the gas-filled fiber. These pulses are used to measure the band structure of the topological insulator Bi2Se3 with a signal to noise ratio comparable to that obtained with high order harmonics from a gas jet. The two-order-of-magnitude gain in efficiency promises time-resolved ARPES measurements at repetition rates of hundreds of kHz or even MHz, with photon energies that cover the first Brillouin zone of most materials.

Opportunities of influence of plasma streams formed in IKA with continuos nor king gas filling en the surface of materials

International Nuclear Information System (INIS)

Useinov, B.M.; Useinova, A.M.; Amrenova, A.U.; Pusankov, S.A.; Sartin, S.A.; Virko, P.G.

2001-01-01

The results of the investigation of influence of plasma stream formed in IKA with continuous working gas filling on the surface of stainless steel 12X18H10T and aluminum are given in this article. It is shown here that the effect of influence of plasma stream on the surface of materials depends on the way of working gas filling. There is the comparison of influence of plasma stream formed in plasma accelerator with impulse and continuous working gas filling

Reidid Venemaale / Jason Bush

Index Scriptorium Estoniae

Bush, Jason

2008-01-01

Korruptsioonist Venemaal Samara piirkonnas, ettevõtte-vaenulikest ülevõtmiskatsetest ja riigiametnike osast selles, Venemaa presidendi algatusest korruptsiooni väljajuurimisel. Vt. samas Jason Bush. BP rasked ajad Venemaal

Injection molding of bushes made of tribological PEEK composites

Directory of Open Access Journals (Sweden)

2007-12-01

Full Text Available Polyetheretherketone (PEEK composites have been extensively studied because of the excellent tribological behavior among plastics. However, laboratory specimens and tests are generally discussed, whereas application studies on industrial components are infrequent. In this paper, an injection molded bush made of tribological PEEK was analyzed to correlate wear behavior and molded material structure. Bushes were tested under unlubricated sliding conditions by means of a short wear test. Surface analysis, differential scanning calorimetry (DSC and optical microscopy were used to evaluate the distribution of the different composite fillers (polytetrafluoroethylene, PTFE, graphite particles and carbon microfibers and their effect on the final bush behavior. A significant lack of homogeneity was observed in the molded bush and black bands appeared on the shaft surface after testing due to the sliding. The bush geometry and the injection molding process should be optimized to allow the best tribological behavior of the molded material under working conditions.

A new focal plane detector for the gas-filled separator TASCA

International Nuclear Information System (INIS)

Gorshkov, Alexander

2010-01-01

Superheavy elements (SHE) exist solely because of enhanced nuclear stability due to shell effects. The production cross sections for the synthesis of SHE decrease continuously, thus, exploration of SHE nuclei is close to the border of present technical limitation. To increase the efficiency and sensitivity in SHE experiments, highly efficient recoil separators with state-of-the-art detection systems are required. In the framework of this thesis, the new focal plane detection system with the dedicated electronics have been developed for the gas-filled recoil separator TASCA at the GSI Helmholtzzentrum for Schwerionenforschung GmbH. The new detection system has been successfully used in recent experiments on synthesis of the E114.

Rose bush leaf and internode expansion dynamics: analysis and development of a model capturing interplant variability

Directory of Open Access Journals (Sweden)

Sabine eDemotes-Mainard

2013-10-01

Full Text Available Bush rose architecture, among other factors, such as plant health, determines plant visual quality. The commercial product is the individual plant and interplant variability may be high within a crop. Thus, both mean plant architecture and interplant variability should be studied. Expansion is an important feature of architecture, but it has been little studied at the level of individual organs in bush roses. We investigated the expansion kinetics of primary shoot organs, to develop a model reproducing the organ expansion of real crops from non destructive input variables. We took interplant variability in expansion kinetics and the model’s ability to simulate this variability into account. Changes in leaflet and internode dimensions over thermal time were recorded for primary shoot expansion, on 83 plants from three crops grown in different climatic conditions and densities. An empirical model was developed, to reproduce organ expansion kinetics for individual plants of a real crop of bush rose primary shoots. Leaflet or internode length was simulated as a logistic function of thermal time. The model was evaluated by cross-validation. We found that differences in leaflet or internode expansion kinetics between phytomer positions and between plants at a given phytomer position were due mostly to large differences in time of organ expansion and expansion rate, rather than differences in expansion duration. Thus, in the model, the parameters linked to expansion duration were predicted by values common to all plants, whereas variability in final size and organ expansion time was captured by input data. The model accurately simulated leaflet and internode expansion for individual plants (RMSEP = 7.3% and 10.2% of final length, respectively. Thus, this study defines the measurements required to simulate expansion and provides the first model simulating organ expansion in rosebush to capture interplant variability.

Greaseless Bushings for Hydropower Applications: Program, Testing, and Results

National Research Council Canada - National Science Library

Jones, John

1999-01-01

...) bushings at its hydropower and navigation facilities. Products of this type currently on the market, however, were not specifically developed for the high-load, low-speed oscillating operating conditions typical for power-generation machinery...

Staged fracturing of horizontal shale gas wells with temporary plugging by sand filling

Directory of Open Access Journals (Sweden)

Xing Liang

2017-03-01

Full Text Available Due to downhole complexities, shale-gas horizontal well fracturing in the Sichuan Basin suffered from casing deformation and failure to apply the technique of cable-conveyed perforation bridge plug. In view of these problems, a new technique of staged volume fracturing with temporary plugging by sand filling is employed. Based on theoretical analyses and field tests, a design of optimized parameters of coiled tubing-conveyed multi-cluster sand-blasting perforation and temporary plugging by sand filling was proposed. It was applied in the horizontal Well ZJ-1 in which casing deformation occurred. The following results are achieved in field operations. First, this technique enables selective staged fracturing in horizontal sections. Second, this technique can realize massive staged fracturing credibly without mechanical plugging, with the operating efficiency equivalent to the conventional bridge plug staged fracturing. Third, full-hole is preserved after fracturing, thus it is possible to directly conduct an open flow test without time consumption of a wiper trip. The staged volume fracturing with temporary plugging by sand filling facilitated the 14-stage fracturing in Well ZJ-1, with similar SRV to that achieved by conventional bridge plug staged fracturing and higher gas yield than neighboring wells on the same well pad. Thus, a new and effective technique is presented in multi-cluster staged volume fracturing of shale gas horizontal wells.

Operation feedback of hydrogen filling station

International Nuclear Information System (INIS)

Pregassame, S.; Barral, K.; Allidieres, L.; Charbonneau, T.; Lacombe, Y.

2004-01-01

One of the technical challenges of hydrogen technology is the development of hydrogen infrastructures which satisfy either safety requirements and reliability of filling processes. AIR LIQUIDE realized an hydrogen filling station in Sassenage (France) operational since September 2003. This station is able to fill 3 buses a day up to 350bar by equilibrium with high pressure buffers. In parallel with commercial stations, the group wanted to create a testing ground in real conditions running with several objectives: validate on a full scale bench a simulation tool able to predict the temperature of both gas and cylinder's materials during filling processes; define the best filling procedures in order to reach mass, temperature and filling time targets; analyse the temperature distribution and evolution inside the cylinder; get a general knowledge about hydrogen stations from safety and reliability point of view; operate the first full scale refuelling station in France. The station is also up-graded for 700bar filling from either a liquid hydrogen source or a gas booster, with cold filling possibility. This paper presents the results concerning 350bar filling : thermal effects, optimal filling procedures and influence of parameters such as climatic conditions are discussed. (author)

Bush blasts 'filth' on TV, school condom handouts.

Science.gov (United States)

1991-12-18

President Bush complained yesterday about the "filth and indecent material" that Americans are exposed to through televised trials. Mr. Bush also criticized programs to combat AIDS that give condoms to teenagers and clean needles to drug addicts. He said such efforts undermine traditional values. He expressed hope that Earvin "Magic" Johnson's revelation that he is HIV positive "will teach people that wayward lifestyles or just kind of unsafe sex at random is not the way it ought to work." Mr. Bush made the comments in a series of satellite television interviews with ABC affiliates in major cities. In an apparent reaction to graphic testimony at the recent Palm Beach rape trial of William Kennedy Smith, Mr. Bush said, "I think the American people have a right to be protected against some of these excesses." Mr. Smith, a nephew of Sen. Edward M. Kennedy, D-Mass., was acquitted last week. The Cable News Network and Court TV provided virtually gavel-to-gavel coverage. Mr. Bush took a dim view of a plan to distribute condoms to juniors and seniors in Philadelphia city high schools as part of a program to combat acquired immune deficiency syndrome. "This is a disease that can be controlled for the most part by individual behavior," Mr. Bush said. "Indeed, I must tell you I'm worried about it. I'm worried about so much filth and indecent material coming in through the airwaves and through these trials into people's homes," he said. full text

Angle-resolved photoemission spectroscopy with 9-eV photon-energy pulses generated in a gas-filled hollow-core photonic crystal fiber

Energy Technology Data Exchange (ETDEWEB)

Bromberger, H., E-mail: Hubertus.Bromberger@mpsd.mpg.de; Liu, H.; Chávez-Cervantes, M.; Gierz, I. [Max Planck Institute for the Structure and Dynamics of Matter, Luruper Chaussee 149, 22761 Hamburg (Germany); Ermolov, A.; Belli, F.; Abdolvand, A.; Russell, P. St. J.; Travers, J. C. [Max Planck Institute for the Science of Light, Günther-Scharowsky-Str. 1, 91058 Erlangen (Germany); Calegari, F. [Max Planck Institute for the Structure and Dynamics of Matter, Luruper Chaussee 149, 22761 Hamburg (Germany); Institute for Photonics and Nanotechnologies, IFN-CNR, Piazza Leonardo da Vinci 32, I-20133 Milano (Italy); Li, M. T.; Lin, C. T. [Max Planck Institute for Solid State Research, Heisenbergstr. 1, 70569 Stuttgart (Germany); Cavalleri, A. [Max Planck Institute for the Structure and Dynamics of Matter, Luruper Chaussee 149, 22761 Hamburg (Germany); Clarendon Laboratory, Department of Physics, University of Oxford, Parks Rd. Oxford OX1 3PU (United Kingdom)

2015-08-31

A recently developed source of ultraviolet radiation, based on optical soliton propagation in a gas-filled hollow-core photonic crystal fiber, is applied here to angle-resolved photoemission spectroscopy (ARPES). Near-infrared femtosecond pulses of only few μJ energy generate vacuum ultraviolet radiation between 5.5 and 9 eV inside the gas-filled fiber. These pulses are used to measure the band structure of the topological insulator Bi{sub 2}Se{sub 3} with a signal to noise ratio comparable to that obtained with high order harmonics from a gas jet. The two-order-of-magnitude gain in efficiency promises time-resolved ARPES measurements at repetition rates of hundreds of kHz or even MHz, with photon energies that cover the first Brillouin zone of most materials.

Angle-resolved photoemission spectroscopy with 9-eV photon-energy pulses generated in a gas-filled hollow-core photonic crystal fiber

International Nuclear Information System (INIS)

Bromberger, H.; Liu, H.; Chávez-Cervantes, M.; Gierz, I.; Ermolov, A.; Belli, F.; Abdolvand, A.; Russell, P. St. J.; Travers, J. C.; Calegari, F.; Li, M. T.; Lin, C. T.; Cavalleri, A.

2015-01-01

A recently developed source of ultraviolet radiation, based on optical soliton propagation in a gas-filled hollow-core photonic crystal fiber, is applied here to angle-resolved photoemission spectroscopy (ARPES). Near-infrared femtosecond pulses of only few μJ energy generate vacuum ultraviolet radiation between 5.5 and 9 eV inside the gas-filled fiber. These pulses are used to measure the band structure of the topological insulator Bi 2 Se 3 with a signal to noise ratio comparable to that obtained with high order harmonics from a gas jet. The two-order-of-magnitude gain in efficiency promises time-resolved ARPES measurements at repetition rates of hundreds of kHz or even MHz, with photon energies that cover the first Brillouin zone of most materials

Mathematical modeling of filling of gas centrifuge cascade for nickel isotope separation by various feed flow rate

Science.gov (United States)

Ushakov, Anton; Orlov, Alexey; Sovach, Victor P.

2018-03-01

This article presents the results of research filling of gas centrifuge cascade for separation of the multicomponent isotope mixture with process gas by various feed flow rate. It has been used mathematical model of the nonstationary hydraulic and separation processes occurring in the gas centrifuge cascade. The research object is definition of the regularity transient of nickel isotopes into cascade during filling of the cascade. It is shown that isotope concentrations into cascade stages after its filling depend on variable parameters and are not equal to its concentration on initial isotope mixture (or feed flow of cascade). This assumption is used earlier any researchers for modeling such nonstationary process as set of steady-state concentration of isotopes into cascade. Article shows physical laws of isotope distribution into cascade stage after its filling. It's shown that varying each parameters of cascade (feed flow rate, feed stage number or cascade stage number) it is possible to change isotope concentration on output cascade flows (light or heavy fraction) for reduction of duration of further process to set of steady-state concentration of isotopes into cascade.

Design optimization of the 100 kV HV bushing for ITER-DNB

Energy Technology Data Exchange (ETDEWEB)

Shah, Sejal, E-mail: sshah@iter-india.org [ITER-India, Institute for Plasma Research, Gandhinagar 382025, Gujarat (India); Rajesh, S. [ITER-India, Institute for Plasma Research, Gandhinagar 382025, Gujarat (India); Microelectronics and Materials Physics Laboratories, P.O. Box 4500, FIN-90014 University of Oulu (Finland); Srusti, B. [DesignTech Systems Ltd, Banjara Hills, Hyderabad, Andhra Pradesh 500034 (India); Bandyopadhyay, M.; Rotti, C.; Singh, M.J.; Roopesh, G.; Chakraborty, A.K. [ITER-India, Institute for Plasma Research, Gandhinagar 382025, Gujarat (India); Schunke, B.; Hemsworth, R.; Chareyre, J. [ITER Organization, Route de Vinon sur Verdon, 13115 St. Paul lez Durance (France)

2011-10-15

The 100 kV bushing of the Diagnostic Neutral Beam (DNB) injector is a cylindrical feedthrough which forms the interface between the gas insulated transmission line and the torus primary vacuum and provides all necessary services to the beam source. All conventions for safety, voltage holding requirement, vacuum compatibility and the choice of materials have been addressed in the design. Finite Element Analyses (FEAs) for the electrostatic and the structural configuration is carried out to validate the design of the High Voltage Bushing (HVB). Several iterations and optimizations of the stress shields are carried out to meet electrostatic criteria, especially at the triple point (the ceramic, metal and vacuum joint), which is critical for good voltage holding. Structural analyses is carried out to assess the stress distribution in the fiber reinforced plastic insulator, the alumina insulator and the integrated HVB for different load cases like operational orientation (horizontal), normal operation and accidental case. Design is further validated for seismic conditions for Seismic Loading-2 (SL-2).

Design optimization of the 100 kV HV bushing for ITER-DNB

International Nuclear Information System (INIS)

Shah, Sejal; Rajesh, S.; Srusti, B.; Bandyopadhyay, M.; Rotti, C.; Singh, M.J.; Roopesh, G.; Chakraborty, A.K.; Schunke, B.; Hemsworth, R.; Chareyre, J.

2011-01-01

The 100 kV bushing of the Diagnostic Neutral Beam (DNB) injector is a cylindrical feedthrough which forms the interface between the gas insulated transmission line and the torus primary vacuum and provides all necessary services to the beam source. All conventions for safety, voltage holding requirement, vacuum compatibility and the choice of materials have been addressed in the design. Finite Element Analyses (FEAs) for the electrostatic and the structural configuration is carried out to validate the design of the High Voltage Bushing (HVB). Several iterations and optimizations of the stress shields are carried out to meet electrostatic criteria, especially at the triple point (the ceramic, metal and vacuum joint), which is critical for good voltage holding. Structural analyses is carried out to assess the stress distribution in the fiber reinforced plastic insulator, the alumina insulator and the integrated HVB for different load cases like operational orientation (horizontal), normal operation and accidental case. Design is further validated for seismic conditions for Seismic Loading-2 (SL-2).

Field distribution on an HVDC wall bushing during laboratory rain tests

International Nuclear Information System (INIS)

Lampe, W.; Wikstrom, D.; Jacobson, B.

1991-01-01

This paper reports that an efficient counter-measure to suppress flashovers across HVDC wall bushings is to make their surfaces hydrophobic. This laboratory investigation reports the measured electric field along such a bushing under different environmental conditions. A significantly reduced radial field strength has been found for the hydrophobic bushing. Moreover, the total field strength distribution becomes almost independent of the prevailing dry zone. The flashover voltage for bushings with a hydrophobic surface is therefore significantly increased

Wall-shaped hohlraum influence on symmetry and energetics in gas-filled hohlraums

Science.gov (United States)

Tassin, Veronique; Philippe, Franck; Laffite, Stephane; Videau, Laurent; Monteil, Marie-Christine; Villette, Bruno; Stemmler, Philippe; Bednarczyk, Sophie; Peche, Emilie; Reneaume, Benoit; Thessieux, Christian

2008-11-01

On the way to the LMJ completion, achieving ignition with 40 quads in a 2-cone configuration will be attempted as a first step. Theoretical investigation of a rugby-shaped hohlraum shows energetics optimization and a better symmetry control compared to a cylindrical hohlraum [1]. We recently conducted experiments on the Omega laser facility with 3 different wall-shaped methane-filled hohlraum configurations. We present here the experimental results. Energetics benefits are shown for reduced wall area hohlraums. The wall-shaped hohlraum influence on time-dependent radiation symmetry is also discussed. For the 3 gas-filled hohlraums configurations, we compare the foamball early-time radiographs, the D2Ar-filled capsule time-integrated images and the core self-emission images. [1] M. Vandenboomgaerde, Phys. Rev. Lett., 99, 065004 (2007).

Automation of experiments at Dubna Gas-Filled Recoil Separator

Science.gov (United States)

Tsyganov, Yu. S.

2016-01-01

Approaches to solving the problems of automation of basic processes in long-term experiments in heavy ion beams of the Dubna Gas-Filled Recoil Separator (DGFRS) facility are considered. Approaches in the field of spectrometry, both of rare α decays of superheavy nuclei and those for constructing monitoring systems to provide accident-free experiment running with highly radioactive targets and recording basic parameters of experiment, are described. The specific features of Double Side Silicon Strip Detectors (DSSSDs) are considered, special attention is paid to the role of boundary effects of neighboring p-n transitions in the "active correlations" method. An example of an off-beam experiment attempting to observe Zeno effect is briefly considered. Basic examples for nuclear reactions of complete fusion at 48Ca ion beams of U-400 cyclotron (LNR, JINR) are given. A scenario of development of the "active correlations" method for the case of very high intensity beams of heavy ions at promising accelerators of LNR, JINR, is presented.

Intrinsic versus extrinsic controls on the development of calcite dendrite bushes, Shuzhishi Spring, Rehai geothermal area, Tengchong, Yunnan Province, China

Science.gov (United States)

Jones, Brian; Peng, Xiaotong

2012-04-01

In the Rehai geothermal area, located near Tengchong, there is an old succession of crystalline calcite that formed from a spring that is no longer active. The thin-bedded succession, exposed on the south bank of Zaotang River, is formed of three-dimensional dendrite bushes that are up to 6 cm high and 3 cm in diameter with multiple levels of branching. Bedding is defined by color, which ranges from white to gray to almost black and locally accentuated by differential weathering that highlights the branching motif of the dendrites. The succession developed through repeated tripartite growth cycles that involved: Phase I that was characterized by rapid vertical growth of the dendrite bushes with ever-increasing branching; Phase II that developed once growth of the dendrites had almost or totally ceased, and involved an initial phase of etching that was followed by the precipitation of various secondary minerals (sheet calcite, trigonal calcite crystals, hexagonal calcite crystals, hexagonal plates formed of Ca and P, Mn precipitates, Si-Mg reticulate coatings, opal-CT lepispheres) on the branches of the calcite dendrites, and Phase III that involved deposition of detrital quartz, feldspar, clay, and calcite on top of the dendrite bushes. The tripartite growth cycle is attributed primarily to aperiodic cycles in the CO2 content of the spring water that was controlled by subsurface igneous activity rather than climatic controls. High CO2 coupled with rapid CO2 degassing triggered growth of the dendrite bushes. As CO2 levels waned, saturation levels in the spring water decreased and calcite dendrite growth ceased and precipitation of the secondary minerals took place, possibly in the microcosms of microbial mats. Deposition of the detrital sediment was probably related to surface runoff that was triggered by periods of high rainfall. Critically, this study shows that intrinsic factors rather than extrinsic factors (e.g., climate) were the prime control on the

Study of the average charge states of 188Pb and 252,254No ions at the gas-filled separator TASCA

International Nuclear Information System (INIS)

Khuyagbaatar, J.; Ackermann, D.; Andersson, L.-L.; Ballof, J.; Brüchle, W.; Düllmann, Ch.E.; Dvorak, J.; Eberhardt, K.; Even, J.; Gorshkov, A.; Graeger, R.; Heßberger, F.-P.; Hild, D.; Hoischen, R.; Jäger, E.; Kindler, B.

2012-01-01

The average charge states of 188 Pb and 252,254 No ions in dilute helium gas were measured at the gas-filled recoil separator TASCA. Hydrogen gas was also used as a filling gas for measurements of the average charge state of 254 No. Helium and hydrogen gases at pressures from 0.2 mbar to 2.0 mbar were used. A strong dependence of the average charge state on the pressure of the filling gases was observed for both, helium and hydrogen. The influence of this dependence, classically attributed to the so-called “density effect”, on the performance of TASCA was investigated. The average charge states of 254 No ions were also measured in mixtures of helium and hydrogen gases at low gas pressures around 1.0 mbar. From the experimental results simple expressions for the prediction of average charge states of heavy ions moving in rarefied helium gas, hydrogen gas, and in their mixture were derived.

Transmucosal gas-loss rates in middle ears initially filled with O2 or CO2.

Science.gov (United States)

Kania, Romain E; Vérillaud, Benjamin; Ars, Bernard; Tran Ba Huy, Patrice; Herman, Philippe; Ar, Amos

2016-10-01

This study investigates the role of different gases in clearance of gas in the middle ear cavity (ME) by its mucosal blood flow. A rat model was used to measure gas volume changes in the ME cavity at constant pressure without ventilation. We disturbed the normal gas composition of the ME by filling it with O 2 or CO 2 , measured the consequent changes in gas volume over time and compared these results with previously obtained ones for air and N 2 . The first 5 min of the primary transient phase (phase I) for O 2 or CO 2 was characterized by a volume loss decrease of -0.49 ± 0.34 μL and -46.28 ± 8.49 μL, respectively, with volume loss increase for air and N 2 differing greatly, at +0.17 ± 0.17 and +2.31 ± 0.81, respectively. The CO 2 value of -46.28 μL showed that a volume of gas equivalent to that of the ME cleft volume was eliminated within the first 5 min. In the second phase (phase II), all gases showed a linear decrease in volume, which presumably represents a steady-state gas loss rate. However, the gas loss rate of -0.307 ± 0.170 μL min -1 for O 2 -filled MEs was significantly higher than the mean of -0.124 μL min -1 for all other gases. We used a previously established mathematical model to calculate the effective ME mucosal blood flow rate under steady-state (phase II) conditions. The blood flow results for O 2 -filled MEs differed greatly from those of the other gases (89.0 ± 49.28 vs. 26.5 μL min -1 , on average), which suggest that the model used to calculate blood flow should be modified if used with O 2 -filled MEs. Further work should involve a comparison of our method with different methods to verify ME blood flow rate. Copyright © 2016 Elsevier B.V. All rights reserved.

Welfare assessment of gas-filled foam as an agent for killing poultry

NARCIS (Netherlands)

Gerritzen, M.A.; Reimert, H.G.M.; Hindle, V.A.; Mckeegan, D.E.F.; Sparrey, J.

2010-01-01

During outbreaks of notifiable diseases in poultry measures are taken to restrict the spread of the disease. Mass on-farm killing of birds using gasfilled foam is such a measure. This study examines the method and technologies involved using gas-filled foam and looks at the problems involved by

Soliton-plasma nonlinear dynamics in mid-IR gas-filled hollow-core fibers

DEFF Research Database (Denmark)

Habib, Selim; Markos, Christos; Bang, Ole

2017-01-01

We investigate numerically soliton-plasma interaction in a noble-gas-filled silica hollow-core anti-resonant fiber pumped in the mid-IR at 3.0 mu m. We observe multiple soliton self-compression stages due to distinct stages where either the self-focusing or the self-defocusing nonlinearity...

Determination of absorption coefficient based on laser beam thermal blooming in gas-filled tube.

Science.gov (United States)

Hafizi, B; Peñano, J; Fischer, R; DiComo, G; Ting, A

2014-08-01

Thermal blooming of a laser beam propagating in a gas-filled tube is investigated both analytically and experimentally. A self-consistent formulation taking into account heating of the gas and the resultant laser beam spreading (including diffraction) is presented. The heat equation is used to determine the temperature variation while the paraxial wave equation is solved in the eikonal approximation to determine the temporal and spatial variation of the Gaussian laser spot radius, Gouy phase (longitudinal phase delay), and wavefront curvature. The analysis is benchmarked against a thermal blooming experiment in the literature using a CO₂ laser beam propagating in a tube filled with air and propane. New experimental results are presented in which a CW fiber laser (1 μm) propagates in a tube filled with nitrogen and water vapor. By matching laboratory and theoretical results, the absorption coefficient of water vapor is found to agree with calculations using MODTRAN (the MODerate-resolution atmospheric TRANsmission molecular absorption database) and HITRAN (the HIgh-resolution atmospheric TRANsmission molecular absorption database).

Northward extension of the known range of the Bush Pipit Anthus ...

African Journals Online (AJOL)

Summary. The Bush Pipit Anthus caffer is a partly nomadic African species whose movements coincide with the onset of rains. Across the continent, the distribution and geographic extent of the five Bush Pipit subspecies are poorly known. In Kenya, the documented range of the Bush Pipit is along the Tanzanian border in ...

Simulation of Bimetallic Bush Hot Rolling Bonding Process

Directory of Open Access Journals (Sweden)

Yaqin Tian

2015-01-01

Full Text Available Three-dimensional model of bimetallic bush was established including the drive roller and the core roller. The model adopted the appropriate interface assumptions. Based on the bonding properties of bimetallic bush the hot rolling process was analyzed. The optimum reduction ratio of 28% is obtained by using the finite element simulation software MARC on the assumption of the bonding conditions. The stress-strain distribution of three dimensions was research assumptions to interface deformation of rolling. At the same time, based on the numerical simulation, the minimum reduction ratio 20% is obtained by using a double metal composite bush rolling new technology from the experiment research. The simulation error is not more than 8%.

Bush doctrine in the Middle East; The US foreign policy towards the Middle East during the George W. Bush presidency

Directory of Open Access Journals (Sweden)

Lukáš Hoder

2011-06-01

Full Text Available The article is focused at the most important elements of the US foreign policy towards the Middle East during the administration of George W. Bush (2001 – 2009. The text has two parts. The first part shows three important influences on creation and formulation of the US foreign policy towards the region. At the first place it was an effort to preserve unipolar character of the international system, hegemonic possition of the USA and its dominance in all regions. The second source was specific decision-making process set up by president Bush and the third source of the Bush strategy was a partial transformation of the US longtime policy towards the Middle East. The second part of the article discuss results of the Bush doctrine in the region. The text is focused at five most important consequences of the US foreign policy, which are the fight against proliferation of weapons of mass destruction, the pursuit of the democratization throughout the region, the Israel-Palestinian conflict, regional “cold war” between Iran and Saudi Arabia and finally the struggle to stabilize the post-conflict Iraq.

Hybrid recoil mass analyzer at IUAC – First results using gas-filled ...

Indian Academy of Sciences (India)

kinematics (to access heavy nuclei around 200 amu mass and beyond) and both ... totype each of RFQ and DTL are undergoing detailed tests for field ... magnet MD1 in gas-filled mode and is especially attractive in reactions induced by ... calculated using GIOS [11] ion-optical program to get the maximum count rate on.

Dynamics of Dispersive Wave Generation in Gas-Filled Photonic Crystal Fiber with the Normal Dispersion

Directory of Open Access Journals (Sweden)

Zhixiang Deng

2017-01-01

Full Text Available The absence of Raman and unique pressure-tunable dispersion is the characteristic feature of gas-filled photonic crystal fiber (PCF, and its zero dispersion points can be extended to the near-infrared by increasing gas pressure. The generation of dispersive wave (DW in the normal group velocity dispersion (GVD region of PCF is investigated. It is demonstrated that considering the self-steepening (SS and introducing the chirp of the initial input pulse are two suitable means to control the DW generation. The SS enhances the relative average intensity of blue-shift DW while weakening that of red-shift DW. The required propagation distance of DW emission is markedly varied by introducing the frequency chirp. Manipulating DW generation in gas-filled PCF by the combined effects of either SS or chirp and three-order dispersion (TOD provides a method for a concentrated transfer of energy into the targeted wavelengths.

The relationship between gas fill density and hohlraum drive performance at the National Ignition Facility

Science.gov (United States)

Hall, G. N.; Jones, O. S.; Strozzi, D. J.; Moody, J. D.; Turnbull, D.; Ralph, J.; Michel, P. A.; Hohenberger, M.; Moore, A. S.; Landen, O. L.; Divol, L.; Bradley, D. K.; Hinkel, D. E.; Mackinnon, A. J.; Town, R. P. J.; Meezan, N. B.; Berzak Hopkins, L.; Izumi, N.

2017-05-01

Indirect drive inertial confinement fusion experiments were conducted at the National Ignition Facility to investigate the performance of the hohlraum drive as a function of hohlraum gas fill density by imploding high-density-carbon capsules using a 2-shock laser pulse. Measurements characterized the backscatter behavior, the production of hot electrons, the motion and brightness of the laser spots on the hohlraum wall, and the efficiency of the hohlraum x-ray drive as a function of gas fill density ρgf between 0.03 mg/cc ("near vacuum") and 1.6 mg/cc. For hohlraums with ρgf up to 0.85 mg/cc, very little stimulated Raman backscatter (SRS) was observed. For higher ρgf, significant SRS was produced and was observed to occur during the rise to peak laser power and throughout the main pulse. The efficiency with which laser energy absorbed by the hohlraum is converted into drive energy was measured to be the same for ρgf ≥ 0.6 mg/cc once the laser reached peak power. However, for the near vacuum case, the absorbed energy was converted to drive energy more efficiently throughout the pulse and maintained an efficiency ˜10% higher than the gas filled hohlraums throughout the main pulse.

Bush jätkab maailma dirigeerimist / Neeme Raud

Index Scriptorium Estoniae

Raud, Neeme, 1969-

2004-01-01

USA president George W. Bush peab oma tagasivalimise kindlustajaks elluviidud välispoliitikat. Autori hinnangul on Bush varasematest presidentidest jõulisemalt muutmas USA-d kapitalismi lipulaevaks, Bushi USA vastandab end euroopalikule mudelile, kus riik tagab kodanikele turvatunde. Kavandatavatest muudatustest USA sisepoliitikas. Vt. samas: Arko Olesk. Verine aasta Iraagi sõjas; Aivar Reinap. USA majandus mustas augus; Andres Keil. Tsivilisatsiooni häirekell

Termination for a superconducting power transmission line including a horizontal cryogenic bushing

Science.gov (United States)

Minati, Kurt F.; Morgan, Gerry H.; McNerney, Andrew J.; Schauer, Felix

1984-01-01

A termination for a superconducting power transmission line is disclosed which is comprised of a standard air entrance insulated vertical bushing with an elbow, a horizontal cryogenic bushing linking the pressurized cryogenic cable environment to the ambient temperature bushing and a stress cone which terminates the cable outer shield and transforms the large radial voltage gradient in the cable dielectric into a much lower radial voltage gradient in the high density helium coolant at the cold end of the cryogenic bushing.

In-beam electron spectrometer used in conjunction with a gas-filled recoil separator

International Nuclear Information System (INIS)

Kankaanpaeae, H.; Butler, P.A.; Greenlees, P.T.; Bastin, J.E.; Herzberg, R.D.; Humphreys, R.D.; Jones, G.D.; Jones, P.; Julin, R.; Keenan, A.; Kettunen, H.; Leino, M.; Miettinen, L.; Page, T.; Rahkila, P.; Scholey, C.; Uusitalo, J.

2004-01-01

The conversion-electron spectrometer SACRED has been redesigned for use in conjunction with the RITU gas-filled recoil separator. The system allows in-beam recoil-decay-tagging (RDT) measurements of internal conversion electrons. The performance of the system using standard sources and in-beam is described

The gas-filled counting tube of the PTB - a device for the activity determination of radioactive gases

International Nuclear Information System (INIS)

Guenther, E.W.

1993-08-01

A measuring device for the activity determination of gaseous radioactive materials (H-3, Kr-85, C-14 O 2 ) has been set up as a PTB primary standard. Samples measured in it or their initial substances are the basis for activity standards. The gaseous samples are introduced directly into the vacuum device. The amount of gas filled can be determined by measuring pressure, volume and temperature. After the gas has been mixed with a counting gas (methane, argon/methane or propane), the count-rates are measured and the activity of the gas calculated. The activity of solid or liquid radioactive substances can also be determined with the device described, if they can be converted into a suitable gas. For this purpose there are additional devices (e.g. for producing hydrogen from water or C-14 O 2 from carbonate). The first models of these devices have been developed and are described. (orig.) [de

Light propagation in gas-filled kagomé hollow core photonic crystal fibres

Science.gov (United States)

Rodrigues, Sílvia M. G.; Facão, Margarida; Ferreira, Mário F. S.

2018-04-01

We study the propagation of light in kagomé hollow core photonic crystal fibres (HC-PCFs) filled with three different noble gases, namely, helium, xenon and argon. Various properties, including the guided modes, the group-velocity dispersion, and the nonlinear parameter were determined. The zero dispersion wavelength and the nonlinear parameter vary with the gas pressure which may be used to tune the generation of new frequencies using the same pump laser and the same fibre. In the case of the kagomé HC-PCF filled with xenon, the zero dispersion wavelength shifts from 693 to 1973 nm when the pressure is increased from 1 to 150bar, while the effective Kerr nonlinearity becomes comparable to that of silica. We have simulated the propagation of femtosecond pulses launched at 790 nm in order to study the generation of supercontinuum and UV light in kagomé HC-PCFs filled with the noble gases.

Physiological and behavioral responses of poultry exposed to gas-filled high expansion foam

NARCIS (Netherlands)

Mckeegan, D.E.F.; Reimert, H.G.M.; Hindle, V.A.; Boulcott, P.; Sparrey, J.M.; Wathes, C.M.; Demmers, T.G.M.; Gerritzen, M.A.

2013-01-01

Disease control measures require poultry to be killed on farms to minimize the risk of disease being transmitted to other poultry and, in some cases, to protect public health. We assessed the welfare implications for poultry of the use of high-expansion gas-filled foam as a potentially humane,

BUSH: A computer code for calculating steady state heat transfer in LWR rod bundles under accident conditions

International Nuclear Information System (INIS)

Shepherd, I.M.

1982-01-01

The computer code BUSH has been developed for the calculation of steady state heat transfer in a rod bundle. For a given power, flow and geometry it can calculate the temperatures in the rods, coolant and shroud assuming that at any axial level each rod can be described by one temperature and the coolant fluid is also radially uniform at this level. Heat transfer by convection and radiation are handled and the geometry is flexible enough to model nearly all types of envisaged shroud design for the SUPERSARA test series. The modular way in which BUSH has been written makes it suitable for future development, either within the present BUSH framework or as part of a more advanced code

Demonstrated high performance of gas-filled rugby-shaped hohlraums on Omega

Energy Technology Data Exchange (ETDEWEB)

Philippe, F.; Villette, B. [CEA, DAM, DIF, F-91297 Arpajon (France); Michel, P. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Petrasso, R. [Plasma Science and Fusion Center, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Stoeckl, C. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States); Giraldez, E. [General Atomics, P.O. Box 85608, San Diego, California 92186-5608 (United States); Tassin, V.; Depierreux, S.; Gauthier, P.; Masson-Laborde, P. E.; Monteil, M. C.; Seytor, P.; Lasinski, B.; Park, H. S.; Ross, J. S.; Amendt, P.; Döppner, T.; Hinkel, D. E.; Wallace, R.; Williams, E.; and others

2014-07-15

A direct experimental comparison of rugby-shaped and cylindrical shaped gas-filled hohlraums on the Omega laser facility demonstrates that higher coupling and minimal backscatter can be achieved in the rugby geometry, leading to significantly enhanced implosion performance. A nearly 50% increase of x-ray drive is associated with earlier bangtime and increase of neutron production. The observed drive enhancement from rugby geometry in this study is almost twice stronger than in previously published results.

Demonstrated high performance of gas-filled rugby-shaped hohlraums on Omega

Science.gov (United States)

Philippe, F.; Tassin, V.; Depierreux, S.; Gauthier, P.; Masson-Laborde, P. E.; Monteil, M. C.; Seytor, P.; Villette, B.; Lasinski, B.; Park, H. S.; Ross, J. S.; Amendt, P.; Döppner, T.; Hinkel, D. E.; Wallace, R.; Williams, E.; Michel, P.; Frenje, J.; Gatu-Johnson, M.; Li, C. K.; Petrasso, R.; Glebov, V.; Sorce, C.; Stoeckl, C.; Nikroo, A.; Giraldez, E.

2014-07-01

A direct experimental comparison of rugby-shaped and cylindrical shaped gas-filled hohlraums on the Omega laser facility demonstrates that higher coupling and minimal backscatter can be achieved in the rugby geometry, leading to significantly enhanced implosion performance. A nearly 50% increase of x-ray drive is associated with earlier bangtime and increase of neutron production. The observed drive enhancement from rugby geometry in this study is almost twice stronger than in previously published results.

Demonstrated high performance of gas-filled rugby-shaped hohlraums on Omega

International Nuclear Information System (INIS)

Philippe, F.; Villette, B.; Michel, P.; Petrasso, R.; Stoeckl, C.; Giraldez, E.; Tassin, V.; Depierreux, S.; Gauthier, P.; Masson-Laborde, P. E.; Monteil, M. C.; Seytor, P.; Lasinski, B.; Park, H. S.; Ross, J. S.; Amendt, P.; Döppner, T.; Hinkel, D. E.; Wallace, R.; Williams, E.

2014-01-01

A direct experimental comparison of rugby-shaped and cylindrical shaped gas-filled hohlraums on the Omega laser facility demonstrates that higher coupling and minimal backscatter can be achieved in the rugby geometry, leading to significantly enhanced implosion performance. A nearly 50% increase of x-ray drive is associated with earlier bangtime and increase of neutron production. The observed drive enhancement from rugby geometry in this study is almost twice stronger than in previously published results

Demonstrated high performance of gas-filled rugby-shaped hohlraums on Omega

Energy Technology Data Exchange (ETDEWEB)

Philippe, F. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Tassin, V. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Depierreux, S. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Gauthier, P. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Masson-Laborde, P. E. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Monteil, M. C. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Seytor, P. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Villette, B. [Commissariat a l' Energie Atomique et aux Energies Alternatives (CEA), Arpajon (France); Lasinski, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Park, H. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ross, J. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Amendt, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Doeppner, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hinkel, D. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wallace, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Williams, E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Michel, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Frenje, J. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Gatu-Johnson, M. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Li, C. K. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Petrasso, R. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Plasma Science and Fusion Center; Glebov, V. [Univ. of Rochester, NY (United States). Lab. for Laser Energetics; Sorce, C. [Univ. of Rochester, NY (United States). Lab. for Laser Energetics; Stoeckl, C. [Univ. of Rochester, NY (United States). Lab. for Laser Energetics; Nikroo, A. [General Atomics, San Diego, CA (United States); Giraldez, E. [General Atomics, San Diego, CA (United States)

2014-07-25

A direct experimental comparison of rugby-shaped and cylindrical shaped gas-filled hohlraums on the Omega laser facility demonstrates that higher coupling and minimal backscatter can be achieved in the rugby geometry, leading to significantly enhanced implosion performance. A nearly 50% increase of x-ray drive is associated with earlier bangtime and increase of neutron production. The observed drive enhancement from rugby geometry in this study is almost twice stronger than in previously published results.

AMS of 93Zr: Passive absorber versus gas-filled magnet

Science.gov (United States)

Hain, Karin; Deneva, Boyana; Faestermann, Thomas; Fimiani, Leticia; Gómez-Guzmán, José Manuel; Koll, Dominik; Korschinek, Gunther; Ludwig, Peter; Sergeyeva, Victoria; Thiollay, Nicolas

2018-05-01

Two different isobar separation techniques were tested for the detection of the long-lived fission product 93Zr (T1/2 = 1.64 · 106 a) using Accelerator Mass Spectrometry (AMS), i.e. a passive absorber and a gas-filled magnet, respectively. Both techniques were used in combination with a Time-of-Flight path for the identification of the stable neighboring isotopes 92Zr and 94Zr. The passive absorber was represented by a stack of silicon nitride foils for high flexibility regarding the thickness for optimal isobar separation. Ion beams with a large variety of energies, between 80 and 180 MeV, were provided for this experiment by the tandem accelerator at the Maier-Leibnitz Laboratory in Garching, Germany. With these beams, the stopping powers of 93Zr and 93Nb as a function of energy were determined experimentally and compared to the results obtained with the simulation program SRIM. Considerable discrepancies regarding the energy dependence of the two stopping power curves relative to each other were found. The lowest detection limit for 93Zr achieved with the passive absorber setup was 93Zr/Zr = 1 · 10-10. In comparison, by optimizing the gas-filled magnet set-up, 93Nb was suppressed by around six orders of magnitude and a detection limit of 93Zr/Zr = 5 · 10-11 was obtained. To our knowledge, these results represent the lowest detection limit achieved for 93Zr until now.

Rhetorical and Linguistic Analysis of Bush's Second Inaugural Speech

Science.gov (United States)

Sameer, Imad Hayif

2017-01-01

This study attempts to analyze Bush's second inaugural speech. It aims at investigating the use of linguistic strategies in it. It resorts to two models which are Aristotle's model while the second is that of Atkinson's (1984) to draw the attention towards linguistic strategies. The analysis shows that Bush's second inaugural speech is successful…

Bush and the Energy

International Nuclear Information System (INIS)

Mommaerts, C.; Barre, N.; Riche, P.

2001-01-01

Facing the increase of the energy demand, Bush the President of the USA, decided to give a new impetus to the nuclear industry. These papers present the economic and the political analysis of this policy from the french point of view showing the anxiety facing the environmental impacts. (A.L.B.)

Reliability of semiconductor and gas-filled diodes for over-voltage protection exposed to ionizing radiation

Directory of Open Access Journals (Sweden)

Stanković Koviljka

2009-01-01

Full Text Available The wide-spread use of semiconductor and gas-filled diodes for non-linear over-voltage protection results in a variety of possible working conditions. It is therefore essential to have a thorough insight into their reliability in exploitation environments which imply exposure to ionizing radiation. The aim of this paper is to investigate the influence of irradiation on over-voltage diode characteristics by exposing the diodes to californium-252 combined neutron/gamma radiation field. The irradiation of semiconductor over-voltage diodes causes severe degradation of their protection characteristics. On the other hand, gas-filled over-voltage diodes exhibit a temporal improvement of performance. The results are presented with the accompanying theoretical interpretations of the observed changes in over-voltage diode behaviour, based on the interaction of radiation with materials constituting the diodes.

How Bush Was 'Churchilled' in Iraq

National Research Council Canada - National Science Library

Porch, Douglas

2004-01-01

.... Since it took office, the Bush administration has argued that the United States should return to strategies of preemption, unilateralism, and hegemony that characterized American national security...

Positrons in gas filled traps and their transport in molecular gases

Energy Technology Data Exchange (ETDEWEB)

Petrovic, Z Lj; Bankovic, A; Marjanovic, S; Suvakov, M; Dujko, S; Malovic, G [Institute of Physics, University of Belgrade, Pregrevica 118, POB 68, Zemun (Serbia); White, R D [ARC Centre for Antimatter-Matter Studies, James Cook University, Townsville 4810, QLD (Australia); Buckman, S J, E-mail: zoran@ipb.ac.rs [ARC Centre for Antimatter-Matter Studies, Australian National University, Canberra, ACT, 0200 (Australia)

2011-01-01

In this paper we give a review of two recent developments in positron transport, calculation of transport coefficients for a relatively complete set of collision cross sections for water vapour and for application of they Monte Carlo technique to model gas filled subexcitation positron traps such as Penning Malmberg Surko (Surko) trap. Calculated transport coefficients, very much like those for argon and other molecular gases show several new kinetic phenomena. The most important is the negative differential conductivity (NDC) for the bulk drift velocity when the flux drift velocity shows no sign of NDC. These results in water vapour are similar to the results in argon or hydrogen. The same technique that has been used for positron (and previously electron) transport may be applied to model development of particles in a Surko trap. We have provided calculation of the ensemble of positrons in the trap from an initial beam like distribution to the fully thermalised distribution. This model, however, does not include plasma effects (interaction between charged particles) and may be applied for lower positron densities.

The development of natural gas as an automotive fuel in China

International Nuclear Information System (INIS)

Ma, Linwei; Geng, Jia; Li, Weqi; Liu, Pei; Li, Zheng

2013-01-01

This manuscript aims to systematically review the development of natural gas as an automotive fuel in China and to draw policy implications for decision making. This manuscript presents a brief overview of natural gas development and the potential of natural gas as an automotive fuel in China, followed by an introduction to the development of various technology pathways for using natural gas as an automotive fuel, including CNG (compressed natural gas) vehicles, LNG (liquefied natural gas) vehicles, and others. This material suggests, a large potential to increase the use of natural gas as an automotive fuel, especially for CNG and LNG vehicles. The following activities will promote the development of natural gas vehicles: prioritizing vehicle use in the utilization of natural gas, supporting the construction of natural gas filling stations, developing a favorable pricing policy for natural gas used in vehicles, and enhancing the research and development to further improve the technology performance, especially for the technology of LNG vehicles. -- Highlights: •An overview of the natural gas development in China. •A systematic introduction of the development of natural gas vehicles in China. •A review of the technological performance of natural gas vehicles. •Policy suggestions to promote the development of natural gas vehicles in China

Experimental validation of prototype high voltage bushing

Science.gov (United States)

Shah, Sejal; Tyagi, H.; Sharma, D.; Parmar, D.; M. N., Vishnudev; Joshi, K.; Patel, K.; Yadav, A.; Patel, R.; Bandyopadhyay, M.; Rotti, C.; Chakraborty, A.

2017-08-01

Prototype High voltage bushing (PHVB) is a scaled down configuration of DNB High Voltage Bushing (HVB) of ITER. It is designed for operation at 50 kV DC to ensure operational performance and thereby confirming the design configuration of DNB HVB. Two concentric insulators viz. Ceramic and Fiber reinforced polymer (FRP) rings are used as double layered vacuum boundary for 50 kV isolation between grounded and high voltage flanges. Stress shields are designed for smooth electric field distribution. During ceramic to Kovar brazing, spilling cannot be controlled which may lead to high localized electrostatic stress. To understand spilling phenomenon and precise stress calculation, quantitative analysis was performed using Scanning Electron Microscopy (SEM) of brazed sample and similar configuration modeled while performing the Finite Element (FE) analysis. FE analysis of PHVB is performed to find out electrical stresses on different areas of PHVB and are maintained similar to DNB HV Bushing. With this configuration, the experiment is performed considering ITER like vacuum and electrical parameters. Initial HV test is performed by temporary vacuum sealing arrangements using gaskets/O-rings at both ends in order to achieve desired vacuum and keep the system maintainable. During validation test, 50 kV voltage withstand is performed for one hour. Voltage withstand test for 60 kV DC (20% higher rated voltage) have also been performed without any breakdown. Successful operation of PHVB confirms the design of DNB HV Bushing. In this paper, configuration of PHVB with experimental validation data is presented.

An ethnobotany of Western Cape Rasta bush medicine.

Science.gov (United States)

Aston Philander, Lisa

2011-11-18

This descriptive ethnobiological research is the first documentation of the materials utilized in the pharmacopeia of a novel group of herbalists, Rasta bush doctors, found in the botanically diverse Western Cape of South Africa. This article suggests that medicinal plants used by bush doctors unite the disparate ethnomedicines found in South Africa. Ethnospecies name and parts used were recorded during detailed inventories of 39 bush doctors. Collection of voucher specimens for botanical identification occurred in 15 locations. Herbal remedies were classified into use categories and were compared to historical ethnobotanical literature to ascertain previous cultural affiliations. There were 205 ethnospecies found in the Rastafari ethnobiology, 181 were used medicinally. Ethnospecies belong to 71 plant families and 71% belonged to six plant families: Rutaceae (13), Asteraceae (13), Apiaceae (9), Lamiaceae (8), Fabaceae (8), and Euphorbiaceae (7). The majority of remedies (49%) were foliage. Medicinal plants treated over 30 ailments including: gastrointestinal symptoms (11%), urogential complaints (11%), skin ailments (9%), and cardiovascular diseases (8%). Bush doctors appropriated remedies traditionally important to Zulu, KhoiSan, European and Xhosa healing traditions. Novel plants and plant utilization were noted for 22 plant species. Use of previously undocumented plant materials as medicinals denote distinct local knowledge including novel Rastafarian utilization of herbs for spiritual and ritual purposes. The range of the largely herbaceous pharmacopeia is narrow compared to the region's highly biodiverse materials and historical records of medicinal use. Bush doctors' experimentation with known herbal remedies illustrates a striking level of cross-cultural adaptation. This syncretic pharmacopeia reflects the cultural diversity of Southern Africa, drawing upon recent invasive species, European influence and traditional herbs used by the KhoiSan, Zulu and Xhosa

'Shakespeare in the bush' and encountering the other in the ...

African Journals Online (AJOL)

'Shakespeare in the bush' and encountering the other in the hermeneutical dialectic of belonging and distanciation 'Shakespeare in the Bush' is an account of an anthropologist's hermeneutical experience among the Tiv people of Nigeria that serves as an illustration o f a hermeneutical circle which results in transforming ...

The role of the gas/plasma plume and self-focusing in a gas-filled capillary discharge waveguide for high-power laser-plasma applications

CERN Document Server

Ciocarlan, C.; Islam, M. R.; Ersfeld, B.; Abuazoum, S.; Wilson, R.; Aniculaesei, C.; Welsh, G. H.; Vieux, G.; Jaroszynski, D. A.; 10.1063/1.4822333

2013-01-01

The role of the gas/plasma plume at the entrance of a gas-filled capillary discharge plasma waveguide in increasing the laser intensity has been investigated. Distinction is made between neutral gas and hot plasma plumes that, respectively, develop before and after discharge breakdown. Time-averaged measurements show that the on-axis plasma density of a fully expanded plasma plume over this region is similar to that inside the waveguide. Above the critical power, relativistic and ponderomotive selffocusing lead to an increase in the intensity, which can be nearly a factor of 2 compared with the case without a plume. When used as a laser plasma wakefield accelerator, the enhancement of intensity can lead to prompt electron injection very close to the entrance of the waveguide. Self-focusing occurs within two Rayleigh lengths of the waveguide entrance plane in the region, where the laser beam is converging. Analytical theory and numerical simulations show that, for a density of 3.01018 cm3, the peak normalized...

Design of Hydraulic Bushing and Vehicle Testing for Reducing the Judder Vibration

Directory of Open Access Journals (Sweden)

Kim Youngman

2018-01-01

Full Text Available Generally, judder vibration is a low-frequency vibration phenomenon caused by a braking force imbalance that occurs when a vehicle is lightly decelerated within a range of 0.1 to 0.2g at a speed of 120 to 60 km/h. This comes from the change in the brake disk thickness (DTV, which is mainly caused by the side run-out (SRO and thermal deformation. The adoption of hydro-bushing in the low arm G bushings of the vehicle front suspension has been done in order to provide great damping in a particular frequency range (<20Hz in order to prevent this judder vibration from being transmitted to the body. The hydro bushing was formulated using a lumped parameter model. The fluid passage between the two chambers was modelled as a nonlinear element such as an orifice, and its important parameters (resistance, compliance were measured using a simplified experimental setup. The main design parameters are the ratio of the cross-sectional area of the chamber to the fluid passage, the length of the fluid passage, etc., and their optimal design is such that the loss angle is greater than 45 ° in the target frequency range of 10 to 20 Hz. The hydro bushing designed for reducing the judder vibration was prepared for the actual vehicle application test and applied to the actual vehicle test. In this study, the proposed hydro bushing was applied to the G bushing of the low arm of the front suspension system of the vehicle. The loss angle of the manufactured hydro bushing was measured using acceleration signals before and after passing through the bushing. The actual vehicle test was performed on the noise dynamometer for the performance analysis of the judder vibration reduction.

The Bush administration climate proposal: rhetoric and reality

Energy Technology Data Exchange (ETDEWEB)

Blanchard, O.

2003-03-01

This paper examines the Bush administration proposal and subsequent actions in terms of the United Nations Framework Convention on Climate Change (UNFCCC). It has four sections. Section one describes the main features of the Bush Administration climate proposal. Section 2 identifies the main underlying factors that shape this proposal. Section 3 rebuts the Administration critique in deciding to reject the Kyoto protocol. Section 4 explores the prospects of the US climate mitigation actions over the next few years. (A.L.B.)

New model of universal gas-filled neutron tube

International Nuclear Information System (INIS)

Bespalov, D.F.; Bessarabskii, I.G.; Voitsik, L.R.; Mints, A.Z.

1985-01-01

The UNG-1 gas-filled neutron tube is serially produced. In type UNG neutron generators, the tube operates in the pulsed mode in the high voltage doubling circuit arrangement. During extended operation, its advantages were discovered: long operating time, fairly stable neutron yield, and simplicity of use and operation. However, the mean neutron yield (approx.10 7 s -1 ) generated by the tube in the optimal mode at the present time proved to be inadequate in solving numerous geophysical problems. So a model of a neutron tube, model UNG-2, was designed, ensuring an enhanced neutron yield of 10 8 s -1 in the continuous-operating mode. When the tube is connected to the high voltage doubling circuit, the mean neutron yield is only somewhat in excess of the neutron yield from the UNG-1 tube

The George W. Bush administration: a new environment?

International Nuclear Information System (INIS)

Jalonick, M.C.

2004-05-01

Bush rejection of the Kyoto protocol and refusal to regulate carbon dioxide emissions was one of many moves that has been unpopular with American environmentalists. In the last four years, they have criticized Bush and his administration for pushing changes to clean air law, forestry policy and endangered species laws. The administration has also come under fire for proposals to drill for oil in sensitive lands. These groups have found some potent allies in Congress, including some moderate Republicans, and in the states. Supporters of Bush environmental initiatives, including most Republican congressional leaders, industry groups and conservative organizations, have called his policy balanced and say that he brings a ''common sense'' approach to industry regulation. These two sides have found little in common in the last four years, and have compromised on almost nothing. As a result, the environment, once a bi-partisan issue, has become more and more a polarizing one. (author)

Acoustically modulated magnetic resonance imaging of gas-filled protein nanostructures

Science.gov (United States)

Lu, George J.; Farhadi, Arash; Szablowski, Jerzy O.; Lee-Gosselin, Audrey; Barnes, Samuel R.; Lakshmanan, Anupama; Bourdeau, Raymond W.; Shapiro, Mikhail G.

2018-05-01

Non-invasive biological imaging requires materials capable of interacting with deeply penetrant forms of energy such as magnetic fields and sound waves. Here, we show that gas vesicles (GVs), a unique class of gas-filled protein nanostructures with differential magnetic susceptibility relative to water, can produce robust contrast in magnetic resonance imaging (MRI) at sub-nanomolar concentrations, and that this contrast can be inactivated with ultrasound in situ to enable background-free imaging. We demonstrate this capability in vitro, in cells expressing these nanostructures as genetically encoded reporters, and in three model in vivo scenarios. Genetic variants of GVs, differing in their magnetic or mechanical phenotypes, allow multiplexed imaging using parametric MRI and differential acoustic sensitivity. Additionally, clustering-induced changes in MRI contrast enable the design of dynamic molecular sensors. By coupling the complementary physics of MRI and ultrasound, this nanomaterial gives rise to a distinct modality for molecular imaging with unique advantages and capabilities.

Development of gap filling technique in HLW repository

International Nuclear Information System (INIS)

Nakashima, Hitoshi; Saito, Akira; Ishii, Takashi; Toguri, Satohito; Okihara, Mitsunobu; Iwasa, Kengo

2016-01-01

HLW is supposed to be disposed underground at depths more than 300 m in Japan. Buffer is an artificial barrier that controls radionuclides migrating into the groundwater. The buffer would be made of a natural swelling clay, bentonite. Construction technology for the buffer has been studied for many years, but studies for the gaps surrounding the buffer are little. The proper handling of the gaps is important for guaranteeing the functions of the buffer. In this paper, gap filling techniques using bentonite pellets have been developed in order to the gap having the same performance as the buffer. A new method for manufacturing high-density spherical pellets has been developed to fill the gap higher density ever reported. For the bentonite pellets, the filling performance and how to use were determined. And full-scale filling tests provided availability of the bentonite pellets and filling techniques. (author)

Stress and gas hydrate-filled fracture distribution, Krishna-Godavari Basin, India

Energy Technology Data Exchange (ETDEWEB)

Cook, A.; Goldberg, D. [Lamont-Doherty Earth Observatory of Columbia Univ., Palisades, NY (United States)

2008-07-01

The first expedition of the Indian National Gas Hydrate Program (NGHP) was launched in the summer of 2006 to characterize the presence of gas hydrates on the continental margins of India. This paper presented a study from the NGHP expedition that found high resistivity fractures in unconsolidated clay sediments on logging-while-drilling (LWD) borehole resistivity images. Gas hydrate-filled and conductive fractures appearing on LWD resistivity images in holes 5A, 5B, 6A, 7A and 10 were analysed and discussed. Fracture orientation and shallow sediment stress orientations were determined for each hole. The paper described how to determine which sections of a log are hydrate bearing as well as how to calculate the predicted water saturated resistivity. It was concluded that holes 5A, 5B, 6A and 7A contained well-ordered, high-angle fractures, from which horizontal stress directions could be accurately resolved. However, these stress directions, contradicted the orientations normally seen on a passive margin, and may be the result of local bathymetry variations. 6 refs., 1 tab., 11 figs.

Laser absorption, power transfer, and radiation symmetry during the first shock of inertial confinement fusion gas-filled hohlraum experiments

International Nuclear Information System (INIS)

Pak, A.; Dewald, E. L.; Landen, O. L.; Milovich, J.; Strozzi, D. J.; Berzak Hopkins, L. F.; Bradley, D. K.; Divol, L.; Ho, D. D.; MacKinnon, A. J.; Meezan, N. B.; Michel, P.; Moody, J. D.; Moore, A. S.; Schneider, M. B.; Town, R. P. J.; Hsing, W. W.; Edwards, M. J.

2015-01-01

Temporally resolved measurements of the hohlraum radiation flux asymmetry incident onto a bismuth coated surrogate capsule have been made over the first two nanoseconds of ignition relevant laser pulses. Specifically, we study the P2 asymmetry of the incoming flux as a function of cone fraction, defined as the inner-to-total laser beam power ratio, for a variety of hohlraums with different scales and gas fills. This work was performed to understand the relevance of recent experiments, conducted in new reduced-scale neopentane gas filled hohlraums, to full scale helium filled ignition targets. Experimental measurements, matched by 3D view factor calculations, are used to infer differences in symmetry, relative beam absorption, and cross beam energy transfer (CBET), employing an analytic model. Despite differences in hohlraum dimensions and gas fill, as well as in laser beam pointing and power, we find that laser absorption, CBET, and the cone fraction, at which a symmetric flux is achieved, are similar to within 25% between experiments conducted in the reduced and full scale hohlraums. This work demonstrates a close surrogacy in the dynamics during the first shock between reduced-scale and full scale implosion experiments and is an important step in enabling the increased rate of study for physics associated with inertial confinement fusion

Laser absorption, power transfer, and radiation symmetry during the first shock of inertial confinement fusion gas-filled hohlraum experiments

Science.gov (United States)

Pak, A.; Dewald, E. L.; Landen, O. L.; Milovich, J.; Strozzi, D. J.; Berzak Hopkins, L. F.; Bradley, D. K.; Divol, L.; Ho, D. D.; MacKinnon, A. J.; Meezan, N. B.; Michel, P.; Moody, J. D.; Moore, A. S.; Schneider, M. B.; Town, R. P. J.; Hsing, W. W.; Edwards, M. J.

2015-12-01

Temporally resolved measurements of the hohlraum radiation flux asymmetry incident onto a bismuth coated surrogate capsule have been made over the first two nanoseconds of ignition relevant laser pulses. Specifically, we study the P2 asymmetry of the incoming flux as a function of cone fraction, defined as the inner-to-total laser beam power ratio, for a variety of hohlraums with different scales and gas fills. This work was performed to understand the relevance of recent experiments, conducted in new reduced-scale neopentane gas filled hohlraums, to full scale helium filled ignition targets. Experimental measurements, matched by 3D view factor calculations, are used to infer differences in symmetry, relative beam absorption, and cross beam energy transfer (CBET), employing an analytic model. Despite differences in hohlraum dimensions and gas fill, as well as in laser beam pointing and power, we find that laser absorption, CBET, and the cone fraction, at which a symmetric flux is achieved, are similar to within 25% between experiments conducted in the reduced and full scale hohlraums. This work demonstrates a close surrogacy in the dynamics during the first shock between reduced-scale and full scale implosion experiments and is an important step in enabling the increased rate of study for physics associated with inertial confinement fusion.

Laser absorption, power transfer, and radiation symmetry during the first shock of inertial confinement fusion gas-filled hohlraum experiments

Energy Technology Data Exchange (ETDEWEB)

Pak, A.; Dewald, E. L.; Landen, O. L.; Milovich, J.; Strozzi, D. J.; Berzak Hopkins, L. F.; Bradley, D. K.; Divol, L.; Ho, D. D.; MacKinnon, A. J.; Meezan, N. B.; Michel, P.; Moody, J. D.; Moore, A. S.; Schneider, M. B.; Town, R. P. J.; Hsing, W. W.; Edwards, M. J. [Lawrence Livermore National Laboratory, Livermore, California, 94550 (United States)

2015-12-15

Temporally resolved measurements of the hohlraum radiation flux asymmetry incident onto a bismuth coated surrogate capsule have been made over the first two nanoseconds of ignition relevant laser pulses. Specifically, we study the P2 asymmetry of the incoming flux as a function of cone fraction, defined as the inner-to-total laser beam power ratio, for a variety of hohlraums with different scales and gas fills. This work was performed to understand the relevance of recent experiments, conducted in new reduced-scale neopentane gas filled hohlraums, to full scale helium filled ignition targets. Experimental measurements, matched by 3D view factor calculations, are used to infer differences in symmetry, relative beam absorption, and cross beam energy transfer (CBET), employing an analytic model. Despite differences in hohlraum dimensions and gas fill, as well as in laser beam pointing and power, we find that laser absorption, CBET, and the cone fraction, at which a symmetric flux is achieved, are similar to within 25% between experiments conducted in the reduced and full scale hohlraums. This work demonstrates a close surrogacy in the dynamics during the first shock between reduced-scale and full scale implosion experiments and is an important step in enabling the increased rate of study for physics associated with inertial confinement fusion.

Safety Distances for hydrogen filling stations

Energy Technology Data Exchange (ETDEWEB)

Matthijsen, A. J. C. M.; Kooi, E. S.

2005-07-01

In the Netherlands there is a growing interest in using natural gas as a transport fuel. The most important drivers behind this development are formed by poor inner city air quality and the decision to close several LPG filling stations. Dwellings are not allowed within the safety distances of 45 or 110 meters from the tanker filling point of these LPG stations, depending on the capacity of the station. Another driver is global warming. We are carrying out a study on station supply, compression, storage and filling for natural gas stations, and a similar, simultaneous study on hydrogen as a followup to our risk analysis for the hydrogen filling station in Amsterdam. Here, three buses drive on hydrogen as part of the European CUTE project. Driving on natural gas is an important step in the transition to cars on hydrogen. This study was commissioned by the Dutch Ministry of Spatial Planning, Housing and the Environment to advise on external safety aspects of future hydrogen filling stations. According to Dutch law homes may not be built within an individual risk contour of 10-6 per year of a dangerous object, such as a plant with hazardous materials or a filling station. An individual risk contour of 10-6 is represented by a line around a dangerous object that connects locations with an individual risk level of 10-6 per year. An individual 'located' within this contour line has a chance of one per million per year or more to be killed as a result of an accident caused by this object. The longest distance between the object and such a contour is called a 'safety distance'. A study on safety distances is now in progress for different kinds of hydrogen filling stations (e. g. gaseous and liquid hydrogen) and for different capacities, such as big, medium and small stations. The focus is on different kinds of hydrogen production and the hydrogen supply of the filling station. To decide on the design and supply of the hydrogen station, we examined the

Development of a micro-Hall magnetometer and studies of individual Fe-filled carbon nanotubes

OpenAIRE

Lipert, Kamil

2011-01-01

This work presents Hall magnetometry studies on individual Fe-filled carbon nanotubes (CNT). For this approach high sensitivity micro Hall sensors based on a GaAs/AlGaAs heterostructure with two dimensional electron gas (2DEG) were developed. Electron beam lithography and wet chemical etching were utilized for patterning Hall sensors onto the heterostructure surface. The devices were characterized by means of scanning electron microscopy, atomic force microscopy and transport measurements. In...

Fatigue Analysis of an Outer Bearing Bush of a Kaplan Turbine

Directory of Open Access Journals (Sweden)

Doina Frunzaverde

2011-01-01

Full Text Available The paper presents the fatigue analysis of an outer bearing bush of aKaplan turbine. This outer bush, together with an inner one, bear thepin lever - trunion - blade subassembly of the runner blade operatingmechanism. For modeling and simulation, SolidWorks software is used.

Pauvreté et politique sociale : le bilan des années Bush  Poverty and Public Policy: An Assessment of the Bush Years

Directory of Open Access Journals (Sweden)

Taoufik Djebali

2010-03-01

Full Text Available Neuf jours après son investiture, G. W. Bush lançait son programme relatif aux Faith-Based Initiatives (FBI, une partie prenante de son « conservatisme compatissant ». Les FBI constituent une rupture avec la tradition monétariste reaganienne, même si elles s’appuient sur le rejet de l’État et la réduction du budget social. Le rôle des FBI est d’aider les organisations caritatives, notamment religieuses, à s’investir davantage dans le travail social.  Le bilan de la politique sociale de G. Bush est plutôt mitigé. La pauvreté a fortement augmenté et les promesses budgétaires en faveur des Faith-Based Organizations n’ont pas été tenues. Pire, les accusations contre les dérives des FBI fusent. L’administration Bush est accusée d’avoir utilisé les FBI et l’argent public pour obtenir des gains politiques et mettre en place un système de financement occulte en faveur des républicains et leurs alliés.Nine days after he was sworn in, Bush launched his social program, the Faith-Based Initiatives (FBI, a major component of his “compassionate conservatism.” The FBI constituted a break with the Reagan monetarist tradition, even if they are motivated by the withdrawal of the State and the reduction of the social budget. The role of the FBI is to help charities, in particular religious organizations, to invest more in social work. On the whole, the social policy implemented during the Bush years is evaluated negatively. Poverty increased rapidly and the financial promises in favor of the Faith-Based Organizations were not kept. Worse, new revelations have been disclosed. The Bush administration is accused of having used the FBI and public money to make political gains and set up an obscure funding system that benefited the Republicans and their political allies.

Broadband high-resolution multi-species CARS in gas-filled hollow-core photonic crystal fiber.

Science.gov (United States)

Trabold, Barbara M; Hupfer, Robert J R; Abdolvand, Amir; St J Russell, Philip

2017-09-01

We report the use of coherent anti-Stokes Raman spectroscopy (CARS) in gas-filled hollow-core photonic crystal fiber (HC-PCF) for trace gas detection. The long optical path-lengths yield a 60 dB increase in the signal level compared with free-space arrangements. This enables a relatively weak supercontinuum (SC) to be used as Stokes seed, along with a ns pump pulse, paving the way for broadband (>4000  cm -1 ) single-shot CARS with an unprecedented resolution of ∼100  MHz. A kagomé-style HC-PCF provides broadband guidance, and, by operating close to the pressure-tunable zero dispersion wavelength, we can ensure simultaneous phase-matching of all gas species. We demonstrate simultaneous measurement of the concentrations of multiple trace gases in a gas sample introduced into the core of the HC-PCF.

Contributions on Computer Aided Manufacturing of Drill-Jig Bushings

Directory of Open Access Journals (Sweden)

Vasile Cojocaru

2009-01-01

Full Text Available The paper presents the steps for computer aided manufacturing (CAMof the bushings technological class parts: design of the part in CADsoftware; generation of the parametrical link with MSExcel files; extract of the useful information for the technological design (mass, volume, surfaces; setting of the CNC lathe and necessary tools; programming of the CNC code for manufacturing. Given the large variety of the bushingsshapes and dimensions, the application focused on the jig bushings used in drilling processes.

Simulation of Stress Distribution in a Thick- Walled Bushing Produced by Die-Casting

Directory of Open Access Journals (Sweden)

Pisarek B.P.

2017-12-01

Full Text Available Metallographic investigations and a computer simulation of stresses in a gravity die-casting bushing were performed. Simulation of the casting process, solidification of the thick-walled bushing and calculations of the stress was performed using MAGMA5.3 software. The size variability of phases κII affecting the formation of phase stresses σf, depending on the location of the metallographic test area, was identified. The distribution of thermal σt and shrinkage stresses σs, depending on the location of the control point SC in the bushing's volume, was estimated. Probably the nature of these stresses will change slightly even after machining. This can cause variations in operating characteristics (friction coefficient, wear. Due to the strong inhomogeneity of the stress distribution in the bushing's casting, it is necessary to perform further tests of the possibility to conduct thermal treatment guaranteeing homogenization of the internal stresses in the casting, as well as to introduce changes in the bushing' s construction and the casting technology. The paper presents the continuation of the results of research aimed at identifying the causes of defects in the thick-walled bushing, die-casting made of CuAl10Fe5Ni5Cr aluminium bronze.

Naine kohtub Hundiga - püüne peal / Kaja Kann, Bush Hartshorn

Index Scriptorium Estoniae

Kann, Kaja, 1973-

2006-01-01

Kanuti Gildi saalis etendub 26.-28. veebr. Kaja Kanni ja Bush Hartshorni lavaduett "Naine ja Hunt". Autorid räägivad, kuidas nad käisid Pärnumaa laantes oma lavaloole õiget tunnetust otsimas. Lisatud andmed Bush Hartshorni kohta

Posterior subtenon triamcinolone acetonide in gas-filled eyes as an adjunctive treatment for complicated proliferative diabetic retinopathy.

Science.gov (United States)

Lee, Yongeun; Kang, Seungbum; Park, Young-Hoon

2013-02-01

To evaluate the effect of adjunctive subtenon injection of triamcinolone acetonide (TA) in gas-filled eyes after vitrectomy for complicated proliferative diabetic retinopathy (PDR). This nonrandomized comparative study included 27 patients (27 eyes) who underwent pars plana vitrectomy and gas tamponade for treatment of PDR with tractional or combined tractional-rhegmatogenous retinal detachment and who received subtenon injection of TA (40 mg) at the end of surgery. The study group was compared with the control group (29 eyes), which was matched with the study group for preoperative and intraoperative parameters, but underwent pars plana vitrectomy and gas tamponade without a subtenon injection of TA. Retinal reattachments without reoperation were achieved in 25 eyes (92.6%) and 26 eyes (89.7%) at 6 months (p = 1.000) in the study and control groups, respectively. The study group and the control group did not differ significantly in the frequency of postoperative proliferative vitreoretinopathy, retinal redetachment rate, reoperation rate, macular pucker formation, postoperative vitreous hemorrhage, gain in visual acuity, intraocular pressure, and intraocular inflammation (p > 0.05). The clinical results of pars plana vitrectomy for complicated PDR are not improved significantly by an adjunctive subtenon TA injection in gas-filled eyes.

Polystyrene foam products equation of state as a function of porosity and fill gas

International Nuclear Information System (INIS)

Mulford, Roberta N.; Swift, Damian C.

2009-01-01

An accurate EOS for polystyrene foam is necessary for analysis of numerous experiments in shock compression, inertial confinement fusion, and astrophysics. Plastic to gas ratios vary between various samples of foam, according to the density and cell-size of the foam. A matrix of compositions has been investigated, allowing prediction of foam response as a function of the plastic-to-air ratio. The EOS code CHEETAH allows participation of the air in the decomposition reaction of the foam. Differences between air-filled, Ar-blown, and CO 2 -blown foams are investigated, to estimate the importance of allowing air to react with products of polystyrene decomposition. O 2 -blown foams are included in some comparisons, to amplify any consequences of reaction with oxygen in air. He-blown foams are included in some comparisons, to provide an extremum of density. Product pressures are slightly higher for oxygen-containing fill gases than for non-oxygen-containing fill gases. Examination of product species indicates that CO 2 decomposes at high temperatures.

Bush animal attacks: management of complex injuries in a resource-limited setting

Directory of Open Access Journals (Sweden)

Mitchell Katrina B

2011-12-01

Full Text Available Abstract Introduction Though animal-related injuries and fatalities have been documented throughout the world, the variety of attacks by wild animals native to rural East Africa are less commonly described. Given the proximity of our northwestern Tanzania hospital to Lake Victoria, Lake Tanganyika, and the Serengeti National Park, and presentation of several patients attacked by bush animals and suffering a variety of complex injuries, we sought to report the pattern of attacks and surgical management in a resource-limited setting. Materials and methods Four patients who were admitted to the northwestern Tanzania tertiary referral hospital, Bugando Medical Centre (BMC, in 2010-2011 suffered attacks by different bush animals: hyena, elephant, crocodile, and vervet monkey. These patients were triaged as trauma patients in the Casualty Ward, then admitted for inpatient monitoring and treatment. Their outcomes were followed to discharge. Results The age and gender of the patients attacked was variable, though all but the pediatric patient were participating in food gathering or guarding activities in rural locations at the time of the attacks. All patients required surgical management of their injuries, which included debridement and closure of wounds, chest tube insertion, amputation, and external fixation of an extremity fracture. All patients survived and were discharged home. Discussion Though human injuries secondary to encounters with undomesticated animals such as cows, moose, and camel are reported, they often are indirect traumas resulting from road traffic collisions. Snake attacks are well documented and common. However, this series of unique bush animal attacks describes the initial and surgical management of human injuries in the resource-limited setting of the developing world. Conclusion Animal attacks are common throughout the world, but their pattern may vary in Africa throughout jungle and bush environmental settings. It is

BiCMOS amplifier-discriminator integrated circuit for gas-filled detector readout

International Nuclear Information System (INIS)

Herve, C.; Dzahini, D.; Le Caer, T.; Richer, J.-P.; Torki, K.

2005-01-01

The paper presents a 16-channel amplifier-discriminator designed in BiCMOS technology. It will be used for the binary parallel readout of gas-filled detectors being designed at the European Synchrotron Radiation Facility. The circuit (named AMS211) has been manufactured. The measured transimpedance gain (400 KΩ), bandwidth (25 MHz) and noise (1570 e - +95 e - /pF ENC) well match the simulated results. The discriminator thresholds are individually controlled by built-in Digital to Analogue Converter. The experience gained with a first prototype of readout electronics indicates that the AMS211 should meet our requirements

BiCMOS amplifier-discriminator integrated circuit for gas-filled detector readout

Energy Technology Data Exchange (ETDEWEB)

Herve, C. [European Synchrotron Radiation Facility, BP 220, 38043 Grenoble Cedex (France)]. E-mail: herve@esrf.fr; Dzahini, D. [Laboratoire de Physique Subatomique et de Cosmologie, Grenoble (France); Le Caer, T. [European Synchrotron Radiation Facility, BP 220, 38043 Grenoble Cedex (France); Richer, J.-P. [Laboratoire de Physique Subatomique et de Cosmologie, Grenoble (France); Torki, K. [Laboratoire TIMA, Grenoble (France)

2005-03-21

The paper presents a 16-channel amplifier-discriminator designed in BiCMOS technology. It will be used for the binary parallel readout of gas-filled detectors being designed at the European Synchrotron Radiation Facility. The circuit (named AMS211) has been manufactured. The measured transimpedance gain (400 K{omega}), bandwidth (25 MHz) and noise (1570 e{sup -}+95 e{sup -}/pF ENC) well match the simulated results. The discriminator thresholds are individually controlled by built-in Digital to Analogue Converter. The experience gained with a first prototype of readout electronics indicates that the AMS211 should meet our requirements.

Generation of multiple VUV dispersive waves using a tapered gas-filled hollow-core anti-resonant fiber

DEFF Research Database (Denmark)

Habib, Md Selim; Markos, Christos; Bang, Ole

2017-01-01

Hollow-core anti-resonant (HC-AR) fibers are perhaps the best platform for ultrafast nonlinear optics based on light-gas interactions because they offer broadband guidance and low-loss guidance. The main advantage of using gases inside HC fibers is that both the dispersion and nonlinearity can...... be tuned by simply changing the pressure of the gas [1]. The emission of efficient dispersive wave (DW) in the deep-UV has been already observed in a uniform Ar-filled hollow-core fiber with tunability from 200 to 320 nm by changing the gas pressure and pulse energy [2]. In the quest of optimizing...

Applicability of fiber model in seismic response analysis for center-clamp type bushings on transformers

International Nuclear Information System (INIS)

Miyagawa, Yoshinori; Sato, Hiroaki

2015-01-01

A bushing is a device for insulation and support of a conductor. Especially it is called center-clamp type when it is connected with a metal holder through clamping force. As a consequence of damage of center-clamp type bushings in Tohoku Earthquake in 2011, refinement of the response analysis method and review of the seismic design procedure became necessary. In the present report, the fiber model, which can evaluate non-linear behavior in the section subjected to axial force and bending moment, was implemented to the CRIEPI's finite element analysis program 'Mastrd' considering following characteristics of center-clamp type bushings. a) The gasket section between a porcelain tube and a metal holder has a torus shape. b) Springs around the top of the bushing give clamping force, but they lock in excessive base rotation. c) The gasket does not resist against tension. d) Local resistance against compression due to bending increases in use of very thin gaskets. The developed program was verified through comparison with the shaking table test result for real bushings whose voltage classes were 154 kV and 275 kV. Deformation indices as rotation angle and base opening due to bending were influenced by damping conditions. Though there was not the condition which brought about remarkable underestimation, reduction of damping for a fiber model element was preferable for safety. On the other hand, bending moment was consistent with experimental results because it tended not to fluctuate in the non-linear region. (author)

Application of desirability function for optimizing the performance characteristics of carbonitrided bushes

Directory of Open Access Journals (Sweden)

Boby John

2013-06-01

Full Text Available The performance of a product is generally characterized by more than one response variable. Hence the management often faces the problem of simultaneous optimization of many response variables. This study was undertaken to simultaneously optimize the surface hardness and case depth of carbonitrided bushes. Even though lots of literature has been published on various methodologies for tackling the multi-response optimization problem, the simultaneous optimization of heat treated properties of carbonitrided bushes are not reported yet. In this research the effect of four factors and two interactions on surface hardness and case depth of carbontirded bushes were studied using design of experiments. Based on the experimental results, the expected values of the heat treated properties of the bushes were estimated for all possible combination of factors. Then the best combination which, simultaneously optimized the response variables, was arrived at using desirability function. The study showed that the optimum combination obtained through desirability function approach not only minimized the variation around the targets of surface hardness and case depth but also was superior to the ones obtained by optimizing the response variables separately. Moreover this study provides a useful and effective approach to design the production process to manufacture bushes with customer specified surface hardness and case depth targets.

Bush favours research at Pentagon and NIH

CERN Multimedia

MacIlwain, C

2001-01-01

The first budget from George W. Bush increases funding for military research and the NIH, while environmental work is drastically cut. The rest of civilian science funding is essentially frozen (1 page).

The Invasive Buddleja Daviddi (Butterfly Bush)

Science.gov (United States)

Buddleja davidii Franchet (Synonym. Buddleia davidii; common name butterfly bush) is a perennial, semi-deciduous, multi-stemmed shrub that is resident in gardens and disturbed areas. Since its introduction to the United Kingdom from China in the late 1800s, B. davidii has become...

Adding Some Gas Can Completely Change How an Object in a Liquid-Filled Housing Responds to Vibration

Science.gov (United States)

Torczynski, J. R.; O'Hern, T. J.; Clausen, J. R.

2015-11-01

Adding a little gas can completely change the motion of an object in a liquid-filled housing during vibration. A common system exhibiting this behavior is a spring-supported piston in a liquid-filled cylinder, where the gaps between them are narrow and depend on the piston position. When gas is absent, the piston's vibrational response is highly overdamped due to forcing viscous liquid through narrow gaps. When a small amount of gas is added, Bjerknes forces cause some of the gas to migrate below the piston. The resulting two gas regions form a pneumatic spring that enables the liquid to move with the piston, with the result that very little liquid is forced through the narrow gaps. This ``Couette mode'' has low damping and thus has a strong resonance near the frequency given by the pneumatic spring constant and the piston mass. At this frequency, the piston response is large, and the nonlinearity from the gap geometry produces a net force on the piston. This ``rectified'' force can be many times the piston's weight and can cause the piston to compress its supporting spring. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Radiation resistant electrical bushing for high pressures and temperatures

Energy Technology Data Exchange (ETDEWEB)

Zajic, V; Banyr, J

1980-11-15

The bushing described is characterized by a hollow with a joining member provided inside of at least one of the bushing's electrically conductive core soldered or embedded into a bore in the insulator. Thus, the concentration is limited of the material of the electrically conductive core in the area of the soldered or embedded joint of the support of the electrically conductive core and the insulator, and the resulting force effect is reduced of the difference in thermal dilatations of the materials of the electrically conductive core and the insulator.

Radiation resistant electrical bushing for high pressures and temperatures

International Nuclear Information System (INIS)

Zajic, V.; Banyr, J.

1980-01-01

The bushing described is characterized by a hollow with a joining member provided inside of at least one of the bushing's electrically conductive core soldered or embedded into a bore in the insulator. Thus, the concentration is limited of the material of the electrically conductive core in the area of the soldered or embedded joint of the support of the electrically conductive core and the insulator, and the resulting force effect is reduced of the difference in thermal dilatations of the materials of the electrically conductive core and the insulator. (J.B.)

Process and device for subdividing a glass tube filled with a radioactive gas

International Nuclear Information System (INIS)

Caffarella, T.E.; Radda, G.J.; Watts, D.J.

1977-01-01

A process is described for subdividing into individual sealed segments an elongated glass tube coated internally with a luminescent material and filled with a radioactive gas, this tube having a longitudinal axis. It consists in directing a focused laser beam on to the surface of the tube in an ambient atmosphere with a pressure greater than that of the gas in the tube and to create a relative, repetitive and alternating movement between the laser beam and the surface of the tube. This movement is transversal to the longitudinal axis of the tube, so as to heat and soften the tube along a cutting line until the tube divides and presents new ends where it contracts, causing these ends to seal up [fr

Elecciones en Estados Unidos: Bush contra Kerry

Directory of Open Access Journals (Sweden)

Miguel Ángel Valverde Loya

2004-12-01

Full Text Available In November 2004, presidential elections took place in the United States. President George W. Bush, a Republican, confronted Democratic candidate John F. Kerry. A very close race was expected, focusing on the economic situation of the country and national security, but it was the latter the one which prevailed during the campaign, even as significant participation was motivated by the issue of “moral values”. It was thought that due to the closeness of the contest, any of the sides could appeal to judicial tribunals, just like four years before. At the end, President Bush achieved a clear victory; both in the popular vote and the electoral college, and his party increased its majorities in both chambers of Congress.

Remarks by president Bush and president Ilves, June 24, 2007 / George W. Bush, Toomas Hendrik Ilves

Index Scriptorium Estoniae

Bush, George W., 1946-

2007-01-01

Ameerika Ühendriikide president George W. Bush ja Eesti president Toomas Hendrik Ilves annavad lühiülevaateValge Maja ovaalkabinetis peetud kõnelusest, mille põhiteemadeks olid olukord Afganistanis ja Iraagis, viisavabadus ning küberrünnakud. Vabariigi President töövisiidil Ameerika Ühendriikides 25.-26.06.2007

Rain and contamination tests on HVDC wall bushings with and without RTV coatings

International Nuclear Information System (INIS)

Schneider, H.M.; Hall, J.F.; Nellis, C.L.; Low, S.S.; Lorden, D.J.

1991-01-01

In this paper results of tests made to determine the ability of room temperature vulcanized (RTV) silicone rubber coatings to improve the performance of HVDC wall bushings are described. The behavior of uncoated full scale ± 500 kV wall bushings is first determined in wetting conditions consisting of nonuniform rain and fog with various amounts of pre-deposited surface contamination. Parameters affecting flashover performance, such as polarity, rain conductivity, and contamination severity are discussed. Results of nonuniform rain tests on an RTV coated wall bushing are reported

Long-term deconditioning of gas-filled surge arresters

Science.gov (United States)

Stanković, Koviljka; Brajović, Dragan; Alimpijević, Mališa; Lončar, Boris

2016-07-01

The aim of this paper is to identify parameters that influence the long-term deconditioning effect of gas-filled surge arrester (GFSA) and to provide practical recommendations for mitigating this effect. Namely, after some period of time, on order of hours or days, during which there is no activation due to overvoltage, the deconditioning of GFSA occurs. This effect was observed experimentally within the paper. The observed parameters that could influence the long-term deconditioning effect were the following: shape of voltage load, gas type, gas pressure, interelectrode distance, electrode material, electrode surface topography as well as GFSA design such as two- or three-electrode configuration. According to the results obtained, it has been shown that the occurrence of long-term deconditioning in an insulating system, insulated by a noble gas at a subpressure and with small interelectrode distances, is a phenomenon that always occurs when the insulating system is at rest for about an hour. It has been found that the type of noble gas does not influence the long-term deconditioning. Analysis of such insulating systems' parameters, with a prospect of being used as GFSAs, has demonstrated that this phenomenon is less pronounced at higher pressures (for the same value of the pressure (p) and interelectrode distance (d) product) and for electrodes with microscopically embossed surfaces. According to the results that were obtained by noble gases and their mixtures, as well as the results that were obtained by mixtures of SF6 gas with noble gasses, it can be claimed with confidence that the effect of the long-term deconditioning is an electrode effect. It has also been established that the deconditioning effect does not depend on the electrode material except in the case of electrodes made out of noble metals, which reduce the effect. Based on these results, it can be recommended that the working point of GFSAs be set (according to the DC breakdown voltage value) at a

Polystyrene foam products equation of state as a function of porosity and fill gas

Energy Technology Data Exchange (ETDEWEB)

Mulford, Roberta N [Los Alamos National Laboratory; Swift, Damian C [LLNL

2009-01-01

An accurate EOS for polystyrene foam is necessary for analysis of numerous experiments in shock compression, inertial confinement fusion, and astrophysics. Plastic to gas ratios vary between various samples of foam, according to the density and cell-size of the foam. A matrix of compositions has been investigated, allowing prediction of foam response as a function of the plastic-to-air ratio. The EOS code CHEETAH allows participation of the air in the decomposition reaction of the foam. Differences between air-filled, Ar-blown, and CO{sub 2}-blown foams are investigated, to estimate the importance of allowing air to react with products of polystyrene decomposition. O{sub 2}-blown foams are included in some comparisons, to amplify any consequences of reaction with oxygen in air. He-blown foams are included in some comparisons, to provide an extremum of density. Product pressures are slightly higher for oxygen-containing fill gases than for non-oxygen-containing fill gases. Examination of product species indicates that CO{sub 2} decomposes at high temperatures.

Bush and Gore Focus on Schools.

Science.gov (United States)

Joiner, Lottie L.

2000-01-01

In the 2000 presidential race, education seems a top priority for Vice-President Al Gore and Texas Governor George W. Bush. Although both candidates are promising billions of federal-aid dollars to raise standards, many believe they are ignoring factors such as student motivation and funding inequities. (MLH)

The Bush Administration's Policy on Haitian Migration

National Research Council Canada - National Science Library

Baptista, A. L

1995-01-01

... (notably the French and U S Ambassador). Aristide was allowed to leave for exile, setting up a long-running crisis that spanned both the latter half of the Bush Administration and part of the Clinton Administration's tenure The purpose...

Development and operation of Northern Natural's aquifer gas storage reservoirs

Energy Technology Data Exchange (ETDEWEB)

Martinson, E V

1969-01-01

There are no depleted (or nondepleted) oil and gas fields in Northern Natural Gas Co.'s market area. Consequently, when the search was started for a possible underground field, the company had to resort to the possibility of locating a water-filled, porous-rock formation (aquifer) in a geological structure which would form a suitable trap for gas storage. Geological research and exploratory drilling was carried on in S. Minnesota, E. Nebraska, and W.-central Iowa. An area located about 40 miles northwest of Des Moines, Iowa, near Redfield, appeared to have the most desirable characteristics for development of a gas-storage field. Drilling of deep developmental wells was started in late 1953 on a double- plunging anticline. The geological structure is similar to that of many oil and gas fields, but the porous formations contained only fresh water. To date, 2 major reservoirs and a minor reservoir have been developed in this structure. As much as 120 billion cu ft has been stored in the 3 reservoirs which supplied 43 billion cu ft gas withdrawals this past season from a total of 85 wells. A second aquifer gas-storage field is under development in N.-central Iowa about 15 miles northeast of Ft. Dodge.

The Gore/Bush Records on Higher Education.

Science.gov (United States)

Walters, Ronald

2000-01-01

Compares the records of presidential candidates George W. Bush and Al Gore on higher education issues and, specifically, those of interest to the Black community. Concludes that Al Gore's record makes him an overall better choice in the 2000 campaign. (DB)

Gas-filled cell as a narrow bandwidth bandpass filter in the VUV wavelength range

Energy Technology Data Exchange (ETDEWEB)

Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2011-04-15

We propose a method for spectrally filtering radiation in the VUV wavelength range by means of a monochromator constituted by a cell filled with a resonantly absorbing rare gas. Around particular wavelengths, the gas exhibits narrow-bandwidth absorbing resonances following the Fano profile. In particular, within the photon energy range 60 eV-65 eV, the correlation index of the Fano profiles for the photoionization spectra in Helium is equal to unity, meaning that the minimum of the cross-section is exactly zero. For sufficiently large column density in the gas cell, the spectrum of the incoming radiation will be attenuated by the background cross-section of many orders of magnitude, except for those wavelengths close to the point where the cross-section is zero. Remarkable advantages of a gas monochromator based on this principle are simplicity, efficiency and narrow-bandwidth. A gas monochromator installed in the experimental hall of a VUV SASE FEL facility would enable the delivery of a single-mode VUV laser beam. The design is identical to that of already existing gas attenuator systems for VUV or X-ray FELs. We present feasibility study and exemplifications for the FLASH facility in the VUV regime. (orig.)

Gas phase chemical studies of superheavy elements using the Dubna gas-filled recoil separator - Stopping range determination

International Nuclear Information System (INIS)

Wittwer, D.; Abdullin, F.Sh.; Aksenov, N.V.; Albin, Yu.V.; Bozhikov, G.A.; Dmitriev, S.N.; Dressler, R.; Eichler, R.; Gaeggeler, H.W.; Henderson, R.A.; Huebener, S.; Kenneally, J.M.; Lebedev, V.Ya.; Lobanov, Yu.V.; Moody, K.J.; Oganessian, Yu.Ts.; Petrushkin, O.V.; Polyakov, A.N.; Piguet, D.; Rasmussen, P.

2010-01-01

Currently, gas phase chemistry experiments with heaviest elements are usually performed with the gas-jet technique with the disadvantage that all reaction products are collected in a gas-filled thermalisation chamber adjacent to the target. The incorporation of a physical preseparation device between target and collection chamber opens up the perspective to perform new chemical studies. But this approach requires detailed knowledge of the stopping force (STF) of the heaviest elements in various materials. Measurements of the energy loss of mercury (Hg), radon (Rn), and nobelium (No) in Mylar and argon (Ar) were performed at low kinetic energies of around (40-270) keV per nucleon. The experimentally obtained values were compared with STF calculations of the commonly used program for calculating stopping and ranges of ions in matter (SRIM). Using the obtained data points an extrapolation of the STF up to element 114, eka-lead, in the same stopping media was carried out. These estimations were applied to design and to perform a first chemical experiment with a superheavy element behind a physical preseparator using the nuclear fusion reaction 244 Pu( 48 Ca; 3n) 289 114. One decay chain assigned to an atom of 285 112, the α-decay product of 289 114, was observed.

La politique commerciale de George W. Bush : rupture ou continuité ? American Trade Policy under George W. Bush: Continuity or Change?

Directory of Open Access Journals (Sweden)

Jean-Baptiste Velut

2010-03-01

Full Text Available Cet article se propose de dresser un bilan critique de la politique commerciale du Président George W. Bush. Dans un premier temps, il compare les perspectives idéologiques et les ambitions politiques du leader républicain à celles de son prédécesseur démocrate, Bill Clinton, avant de mettre l’accent sur les nouvelles données du contexte politique et économique des années 2000. Ces éléments introductifs serviront de fondations, d’une part, pour l’étude de la gestion des relations commerciales entre les États-Unis et leurs principaux partenaires économiques, et d’autre part pour l’analyse de la stratégie de « libéralisation compétitive » adoptée par George W. Bush aux niveaux multilatéral, régional et bilatéral. L’objectif est double : déterminer les lignes de rupture et de continuité entre le président républicain et son prédécesseur ; et établir un bilan des principales initiatives commerciales lancées par l’administration Bush dans le but de mieux comprendre les nouveaux défis intérieurs et internationaux auxquels son successeur sera confronté.This article offers a critical assessment of American trade policy under George W. Bush. It begins by comparing his views and political ambitions with those of his Democratic predecessor, Bill Clinton, before highlighting the new political and economic context of the 2000s. These elements provide crucial background, first to study the evolution of America’s relations with its top trading partners and second to analyze the strategy of “competitive liberalization” undertaken by the administration at the multilateral, regional and bilateral levels. This article has two objectives: 1 determining trends of continuity and change between George W. Bush and his predecessor; 2 assessing the trade policy initiatives undertaken by the Republican administration in order to understand the domestic and international challenges with which the next President

George Bush peab sõjalist jõudu viimaseks valikuks / George W. Bush ; interv. Kaarel Kaas

Index Scriptorium Estoniae

Bush, George W., 1946-

2005-01-01

Ilmunud ka: Põhjarannik 7. mai 2005, lk. 2, Severnoje Poberezhje 7. mai, 2005, lk. 2. USA president George Bush andis 5. mail Valges Majas intervjuu kuuele Euroopa ajakirjanikule. 9. mai pidustustest Moskvas, USA-Läti, Venemaa-Balti riikide suhetest, demokraatiast Venemaal, Ameerika Ühendriikide ning Baltimaade viisarežiimist, vabaduse mõistestst, kinnipeetavate kohtlemisest Guantanamo sõjaväebaasis, relvade kasutamise vajadusest, terrorismist. Vt. samas: Kuidas usutlus võimalikuks sai

[Soil basal respiration and enzyme activities in the root-layer soil of tea bushes in a red soil].

Science.gov (United States)

Yu, Shen; He, Zhenli; Zhang, Rongguang; Chen, Guochao; Huang, Changyong

2003-02-01

Soil basal respiration potential, metabolic quotient (qCO2), and activities of urease, invertase and acid phosphomonoesterase were investigated in the root-layer of 10-, 40-, and 90-yr-old tea bushes grown on the same type of red soil. The soil daily basal respiration potential ranged from 36.23 to 58.52 mg.kg-1.d-1, and the potentials in the root-layer of 40- or 90-yr-old were greater than that of 10-yr old tea bushes. The daily qCO2, ranging from 0.30 to 0.68, was in the reverse trend. The activities of test three enzymes changed differently with tea bushes' age. Urease activity in the root-layer of all age tea bushes ranged from 41.48 to 47.72 mg.kg-1.h-1 and slightly decreased with tea bushes' age. Invertase activity was 189.29-363.40 mg.kg-1.h-1 and decreased with tea bushes' age, but its activity in the root-layer of 10-year old tea bushes was significantly greater than that in the root-layer soil of 40- or 90-year old tea bushes. Acid phosphomonoesterase activity (444.22-828.32 mg.kg-1.h-1) increased significantly with tea bushes' age. Soil basal respiration potential, qCO2 and activities of 3 soil enzymes were closely related to soil pH, soil organic carbon, total nitrogen and C/N ratio, total soluble phenol, and microbial biomass carbon, respectively.

Characteristics and interpretation of fracture-filled gas hydrate: an example from the Ulleung Basin, East Sea of Korea

Science.gov (United States)

Lee, Myung Woong; Collett, Timothy S.

2013-01-01

Through the use of 2-D and 3-D seismic data, a total of thirteen sites were selected and drilled in the East Sea of Korea in 2010. A suite of logging-while-drilling (LWD) logs was acquired at each site. LWD logs from the UBGH2-3A well indicate significant gas hydrate in clay-bearing sediments including several zones with massive gas hydrate with a bulk density less than 1.0 g/m3 for depths between 5 and 103 m below the sea floor. The UBGH2-3A well was drilled on a seismically identified chimney structure with a mound feature at the sea floor. Average gas hydrate saturations estimated from the isotropic analysis of ring resistivity and P-wave velocity logs are 80 ± 13% and 47 ± 16%, respectively, whereas they are 46 ± 17% and 45 ± 16%, respectively from the anisotropic analysis. Modeling indicates that the upper part of chimney (between 5 and 45 m below sea floor [mbsf]) is characterized by gas hydrate filling near horizontal fractures (7° dip) and the lower part of chimney (between 45 and 103 mbsf) is characterized by gas hydrate filling high angle fractures on the basis of ring resistivity and P-wave velocity. The anisotropic analysis using P40H resistivity (phase shift resistivity at 32 mHz with 40 inch spacing) and the P-wave velocity yields a gas hydrate saturation of 46 ± 15% and 46 ± 15% respectively, similar to those estimated using ring resistivity and P-wave velocity, but with quite different fracture dip angles. Differences in vertical resolution, depth of investigation, and a finite fracture dimension relative to the tool separation appear to contribute to this discrepancy. Forward modeling of anisotropic resistivity and velocity are essential to identify gas hydrate in fractures and to estimate accurate gas hydrate amounts.

Mould and mycotoxin exposure assessment of melon and bush mango seeds, two common soup thickeners consumed in Nigeria.

Science.gov (United States)

Ezekiel, Chibundu N; Sulyok, Michael; Somorin, Yinka; Odutayo, Foluke I; Nwabekee, Stella U; Balogun, Afeez T; Krska, Rudolf

2016-11-21

An examination of the mould and fungal metabolite pattern in melon and bush mango seeds locally produced in Nigeria was undertaken in order to understand the mycotoxicological risk posed to consumers of both of these important and commonly consumed soup thickeners. The variation in mycotoxin levels in graded categories of both foodstuffs were also determined. Aspergillus, Fusarium, Penicillium, Mucorales and Trichoderma were the recovered fungi from the foodstuffs with Aspergillus species dominating (melon=97.8%; bush mango=89.9%). Among the Aspergillus species identified Aspergillus section Flavi dominated (melon: 72%; bush mango: 57%) and A. flavus, A. parasiticus, A. parvisclerotigenus and A. tamarii were the recovered species. About 56% and 73% of the A. flavus isolates from melon and bush mango seed samples, respectively were aflatoxigenic. Thirty-four and 59 metabolites including notable mycotoxins were found in the melon and bush mango seeds respectively. Mean aflatoxin levels (μg/kg) in melon (aflatoxin B 1 (AFB 1 )=37.5 and total aflatoxins=142) and bush mango seeds (AFB 1 =68.1 and total aflatoxins=61.7) were higher than other mycotoxins, suggesting potential higher exposure for consumer populations. Significantly (p<0.05) higher levels of mycotoxins were found in hand-peeled melon and discoloured bush mango seeds than in machine-peeled melon and non-discoloured seeds except for HT-2 and T-2 toxins which occurred conversely. All melon and bush mango seeds exceeded the 2μg/kg AFB 1 limit whereas all melon and 55% of bush mango seeds exceeded the 4μg/kg total aflatoxin EU limit adopted in Nigeria. This is the first report of (1) mycotoxin co-occurrence in bush mango seeds, (2) cyclopiazonic acid, HT-2 toxin, moniliformin, mycophenolic acid, T-2 toxin and tenuazonic acid occurrence, and (3) mycotoxin exposure assessment of both foodstuffs. Copyright © 2016 Elsevier B.V. All rights reserved.

Focal spot size predictions for beam transport through a gas-filled reactor

International Nuclear Information System (INIS)

Yu, S.S.; Lee, E.P.; Buchanan, H.L.

1980-01-01

Results from calculations of focal spot size for beam transport through a gas-filled reactor are summarized. In the converging beam mode, we find an enlargement of the focal spot due to multiple scattering and zeroth order self-field effects. This enlargement can be minimized by maintaining small reactors together with a careful choice of the gaseous medium. The self-focused mode, on the other hand, is relatively insensitive to the reactor environment, but is critically dependent upon initial beam quality. This requirement on beam quality can be significantly eased by the injection of an electron beam of modest current from the opposite wall

Polystyrene Foam EOS as a Function of Porosity and Fill Gas

Science.gov (United States)

Mulford, Roberta; Swift, Damian

2009-06-01

An accurate EOS for polystyrene foam is necessary for analysis of numerous experiments in shock compression, inertial confinement fusion, and astrophysics. Plastic to gas ratios vary between various samples of foam, according to the density and cell-size of the foam. A matrix of compositions has been investigated, allowing prediction of foam response as a function of the plastic-to-air ratio. The EOS code CHEETAH allows participation of the air in the decomposition reaction of the foam, Differences between air-filled, nitrogen-blown, and CO2-blown foams are investigated, to estimate the importance of allowing air to react with plastic products during decomposition. Results differ somewhat from the conventional EOS, which are generated from values for plastic extrapolated to low densities.

Measurements of gas filled halfraum energetics at the national ignition facility using a single quad

Energy Technology Data Exchange (ETDEWEB)

Kline, J.L.; Fernandez, J.C.; Goldman, S.R.; Gautier, D.C.; Hegelich, B.M.; Montgomery, D.S.; Lanier, N.E.; Rose, H.A.; Workman, J.B. [Los Alamos National Laboratory, Los Alamos, NM (United States); Braun, D.; Landen, O.; Niemann, C.; Campbell, K.; Celeste, J.; Dewald, E.; Glenzer, S.; Hinkel, D.; Holder, J.; Kalantar, D.; Kamperschroer, J.; Kimbrough, J.; Kirkwood, R.; Lee, F.D.; MacGowan, B.; MacKinnon, A.; McDonald, J.; Schein, J.; Schneider, M.; Suter, L.; Young, B. [Lawrence Livermore National Lab., CA (United States)

2006-06-15

Gas filled halfraum experiments were conducted at the National Ignition Facility which provided an excellent test of the tools needed to understand halfraum energetics in an ignition relevant regime. The experiments used a highly shaped laser pulse and measured large levels of backscattered laser energy. These two components challenge the ability of radiation hydrodynamic simulations to model the experiments. The results show good agreement between experimental measurements and simulations. (authors)

Measurements of gas filled halfraum energetics at the national ignition facility using a single quad

International Nuclear Information System (INIS)

Kline, J.L.; Fernandez, J.C.; Goldman, S.R.; Gautier, D.C.; Hegelich, B.M.; Montgomery, D.S.; Lanier, N.E.; Rose, H.A.; Workman, J.B.; Braun, D.; Landen, O.; Niemann, C.; Campbell, K.; Celeste, J.; Dewald, E.; Glenzer, S.; Hinkel, D.; Holder, J.; Kalantar, D.; Kamperschroer, J.; Kimbrough, J.; Kirkwood, R.; Lee, F.D.; MacGowan, B.; MacKinnon, A.; McDonald, J.; Schein, J.; Schneider, M.; Suter, L.; Young, B.

2006-01-01

Gas filled halfraum experiments were conducted at the National Ignition Facility which provided an excellent test of the tools needed to understand halfraum energetics in an ignition relevant regime. The experiments used a highly shaped laser pulse and measured large levels of backscattered laser energy. These two components challenge the ability of radiation hydrodynamic simulations to model the experiments. The results show good agreement between experimental measurements and simulations. (authors)

Controls on Gas Hydrate Formation and Dissociation

Energy Technology Data Exchange (ETDEWEB)

Miriam Kastner; Ian MacDonald

2006-03-03

The main objectives of the project were to monitor, characterize, and quantify in situ the rates of formation and dissociation of methane hydrates at and near the seafloor in the northern Gulf of Mexico, with a focus on the Bush Hill seafloor hydrate mound; to record the linkages between physical and chemical parameters of the deposits over the course of one year, by emphasizing the response of the hydrate mound to temperature and chemical perturbations; and to document the seafloor and water column environmental impacts of hydrate formation and dissociation. For these, monitoring the dynamics of gas hydrate formation and dissociation was required. The objectives were achieved by an integrated field and laboratory scientific study, particularly by monitoring in situ formation and dissociation of the outcropping gas hydrate mound and of the associated gas-rich sediments. In addition to monitoring with the MOSQUITOs, fluid flow rates and temperature, continuously sampling in situ pore fluids for the chemistry, and imaging the hydrate mound, pore fluids from cores, peepers and gas hydrate samples from the mound were as well sampled and analyzed for chemical and isotopic compositions. In order to determine the impact of gas hydrate dissociation and/or methane venting across the seafloor on the ocean and atmosphere, the overlying seawater was sampled and thoroughly analyzed chemically and for methane C isotope ratios. At Bush hill the pore fluid chemistry varies significantly over short distances as well as within some of the specific sites monitored for 440 days, and gas venting is primarily focused. The pore fluid chemistry in the tub-warm and mussel shell fields clearly documented active gas hydrate and authigenic carbonate formation during the monitoring period. The advecting fluid is depleted in sulfate, Ca Mg, and Sr and is rich in methane; at the main vent sites the fluid is methane supersaturated, thus bubble plumes form. The subsurface hydrology exhibits both

77 FR 27253 - Proposed Collection, Laura Bush 21st Century Librarian Grant Program Evaluation

Science.gov (United States)

2012-05-09

... Century Librarian Grant Program Evaluation AGENCY: Institute of Museum and Library Services, National... evaluate and make improvements to the Laura Bush 21st Century Librarian (LB21) Grant Program. The... proposes clearance of the Laura Bush 21st Century Librarian Grant Program Evaluation. The 60-day Notice for...

THE INFLUENCE OF BUSH FORMATION IN RED BEET ON SEED PRODUCTIVITY AND SOWING QUALITIES

Directory of Open Access Journals (Sweden)

L. A. Yusupova

2017-01-01

Full Text Available It is necessary not only to possess the technology to grow seeds but also to have knowledge of plant biology in particular crop, and sowing qualities of its seeds. The particular place where seeds are forming on the mother plant has much influence on qualities of sowing seed material. The influence of the development of red beet plant bush on seed productivity, monogermity and sowing qualities of seeds was estimated in Rostov oblast. The main stalk pruning and application of plant growth retardants had an effect on the structure of red beet bush. In variants given in seed plants, the third type of branching prevailed due to lack or oppression of main stalk. Consequently, the seed yield and proportion of single fruit formation rose. It was also shown that due to treatment of plants with growth retardant ‘Floron’ at the stage of waxen maturity significantly improved the seed germination as compared with control variant. As a result of the study it was shown that the mechanical pruning of main stalk and application of growth retardants had affected on the structure of seed red beet bush increasing the yield mono-seed compounds as well as had improved the yield and seed quality of monogerm red beet. 

Coalbed gas development

International Nuclear Information System (INIS)

Anon.

1992-01-01

This book includes: Overview of coalbed gas development; Coalbed gas development in the West Coalbed gas development on Indian lands; Multi-mineral development conflicts; Statutory solutions to ownership disputes; State and local regulation; Environmental regulations; Status of the section 29 tax credit extension; Using the section 29 credit; Leasing coalbed gas prospects; Coalbed gas joint operating agreements and Purchase and sale agreements for coalbed gas properties

Radiation damage: special reference to gas filled radiation detectors

International Nuclear Information System (INIS)

Gaur, Sudha; Joshi, Pankaj Kumar; Rathore, Shakuntla

2012-01-01

Radiation damage is a term associated with ionizing radiation. In gas filled particle detectors, radiation damage to gases plays an important role in the device's ageing, especially in devices exposed to high intensity radiation, e.g. detector for the large hadrons collide. Ionization processes require energy above 10 eV, while splitting covalent bond in molecules and generating free radical require only 3-4 eV. The electrical discharges initiated by the ionization event by the particles result in plasma populated by large amount of free radical. The highly reactive free radical can recombine back to original molecules, or initiate a chain of free radical polymerization reaction with other molecules, yielding compounds with increasing molecular weight. These high molecular weight compounds then precipitate from gases phase, forming conductive or non-conductive deposits on the electrodes an insulating surfaces of the detector and distorting it's response. Gases containing hydrocarbon quenchers, e.g. argon-methane, are typically sensitive to ageing by polymerization; addition of oxygen tends to lower the ageing rates. Trace amount of silicon oils, present form out gassing of silicon elastomers and especially from traces of silicon lubricant tend to decompose and form deposits of silicon crystals on the surfaces. Gases mixture of argon (or xenon) with CO 2 and optimally also with 2-3 % of oxygen are highly tolerant to high radiation fluxes. The oxygen is added as noble gas with CO 2 has too high transparency for high energy photons; ozone formed from the oxygen is a strong absorber of ultra violet photons. Carbon tetra fluoride can be used as a component of the gas for high-rate detectors; the fluorine radical produced during the operation however limit the choice of materials for the chambers and electrodes (e.g. gold electrodes are required, as the fluorine radicals attack metals, forming fluorides). Addition of carbon tetra fluoride can however eliminate the

Study of Electron Swarm in High Pressure Hydrogen Gas Filled RF Cavities

International Nuclear Information System (INIS)

Yonehara, K.; Chung, M.; Jansson, A.; Moretti, A.; Popovic, M.; Tollestrup, A.; Alsharo'a, M.; Johnson, R.P.; Notani, M.; Oka, T.; Wang, H.

2010-01-01

A high pressure hydrogen gas filled RF cavity has been proposed for use in the muon collection system for a muon collider. It allows for high electric field gradients in RF cavities located in strong magnetic fields, a condition frequently encountered in a muon cooling channel. In addition, an intense muon beam will generate an electron swarm via the ionization process in the cavity. A large amount of RF power will be consumed into the swarm. We show the results from our studies of the HV RF breakdown in a cavity without a beam and present some results on the resulting electron swarm dynamics. This is preliminary to actual beam tests which will take place late in 2010.

Bush kutsub ühte hoidma / Kaivo Kopli

Index Scriptorium Estoniae

Kopli, Kaivo

2004-01-01

USA president George W. Bush kutsus liitlasriike hoidma oma väeüksusi Iraagis. Hispaania tulevane peaminister Jose Luis Rodriquez Zapatero lubas Hispaania sõjaväelased Iraagist ära tuua, kui operatsioonide juhtimine ei lähe USA-lt üle ÜRO-le. Vt. samas: Rumsfeld: hispaanlaste asemele tulevad teised

46 CFR 98.25-65 - Filling density.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Filling density. 98.25-65 Section 98.25-65 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL... § 98.25-65 Filling density. (a) The filling density, or the percent ratio of the liquefied gas that may...

Development of KALIMER auxiliary sodium and cover gas management system

International Nuclear Information System (INIS)

Kwon, Sang Woon; Hwang, Sung Tae

1996-11-01

The objectives of this report are to develop and to describe the auxiliary liquid metal and cover gas management systems of KALIMER. the system includes following system: (1) Auxiliary liquid metal system (2) Inert gas receiving and processing system (3) Impurity monitoring and analysis system. Auxiliary liquid metal and cover gas management system of KALIMER was developed. Functions of each systems and design basis were describes. The auxiliary liquid metal system receives, transfers, and purifies all sodium used in the plant. The system furnishes the required sodium quantity at the pressure, temperature, flow rate, and purity specified by the interfacing system. The intermediated sodium processing subsystem (ISPS) provides continuous purification of IHTS sodium, as well as performs the initial fill operation for both the IHTS and reactor vessel. The primary sodium processing subsystem provides purification (cold trapping) for sodium used in the reactor vessel. The inert gas receiving and processing (IGRP) system provides liquefied and ambient gas storage, delivers inert gases of specified composition and purity at regulated flow rates and pressures to points of usage throughout the KALIMER, and accepts the contaminated gases through its vacuum facilities for storage and transfer to the gas radwaste system. Three gases are used in the KALIMER: helium, argon, and nitrogen. 11 tabs., 12 figs. (Author)

Development of KALIMER auxiliary sodium and cover gas management system

Energy Technology Data Exchange (ETDEWEB)

Kwon, Sang Woon; Hwang, Sung Tae [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-11-01

The objectives of this report are to develop and to describe the auxiliary liquid metal and cover gas management systems of KALIMER. the system includes following system: (1) Auxiliary liquid metal system (2) Inert gas receiving and processing system (3) Impurity monitoring and analysis system. Auxiliary liquid metal and cover gas management system of KALIMER was developed. Functions of each systems and design basis were describes. The auxiliary liquid metal system receives, transfers, and purifies all sodium used in the plant. The system furnishes the required sodium quantity at the pressure, temperature, flow rate, and purity specified by the interfacing system. The intermediated sodium processing subsystem (ISPS) provides continuous purification of IHTS sodium, as well as performs the initial fill operation for both the IHTS and reactor vessel. The primary sodium processing subsystem provides purification (cold trapping) for sodium used in the reactor vessel. The inert gas receiving and processing (IGRP) system provides liquefied and ambient gas storage, delivers inert gases of specified composition and purity at regulated flow rates and pressures to points of usage throughout the KALIMER, and accepts the contaminated gases through its vacuum facilities for storage and transfer to the gas radwaste system. Three gases are used in the KALIMER: helium, argon, and nitrogen. 11 tabs., 12 figs. (Author).

The Invasive Shrub, Buddleja davidii (Butterfl y Bush)

Science.gov (United States)

Buddleja davidii Franchet (Synonym. Buddleia davidii; common name Butterfly bush) is a perennial, semi-deciduous shrub or small multi-stemmed tree that is resident in gardens and disturbed areas in temperate locations worldwide. Since its introduction to the United Kingdom from c...

Budgets come first as Bush chooses NASA head

CERN Multimedia

Schrope, M

2001-01-01

President Bush has nominated a budget expert with no aerospace or scientific background as the agency's administrator. Sean O'Keefe, formerly scrutinized overspending in the International Space Station programme. If appointed, he will have to implement reforms he himself recommended (1/2 page).

Economic efficiency of the use of the bush vegetation from slopes of the ameliorative canals

International Nuclear Information System (INIS)

Titov, V.N.

2009-01-01

The results of calculations of the economic efficiency of the use of the bush vegetation from slopes of the ameliorative canals for fuel and energy purposes has been presented. The two variants of disposal of bushes are considered burning and conversion into fuel chips. (authors)

Convergent ablation measurements with gas-filled rugby hohlraum on OMEGA

Science.gov (United States)

Casner, A.; Jalinaud, T.; Galmiche, D.

2016-03-01

Convergent ablation experiments with gas-filled rugby hohlraum were performed for the first time on the OMEGA laser facility. A time resolved 1D streaked radiography of capsule implosion is acquired in the direction perpendicular to hohlraum axis, whereas a 2D gated radiography is acquired at the same time along the hohlraum axis on a x-ray framing camera. The implosion trajectory has been measured for various kinds of uniformly doped ablators, including germanium-doped and silicon-doped polymers (CH), at two different doping fraction (2% and 4% at.). Our experiments aimed also at measuring the implosion performance of laminated capsules. A laminated ablator is constituted by thin alternate layers of un-doped and doped CH. It has been previously shown in planar geometry that laminated ablators could mitigate Rayleigh Taylor growth at ablation front. Our results confirm that the implosion of a capsule constituted with a uniform or laminated ablator behaves similarly, in accordance with post-shot simulations performed with the CEA hydrocode FCI2.

Analysis of selected energy security issues related to US crude oil and natural gas exploration, development, production, transportation and processing

International Nuclear Information System (INIS)

1990-10-01

In July 1989, President Bush directed the Secretary of Energy to initiate the development of a comprehensive National Energy Strategy (NES) built upon a national consensus. The overall principle for the NES, as defined by the President and articulated by the Economic Policy Council (EPC), is the continuation of the successful policy of market reliance, consistent with the following goals: Balancing of energy, economic, and environmental concerns; and reduced dependence by the US and its friends and allies on potentially unreliable energy suppliers. The analyses presented in this report draw upon a large body of work previously conducted for DOE/Office of Fossil Energy, the US Department of Interior/Minerals Management Service (DOI/MMS), and the Gas Research Institute (GRI), referenced throughout the text of this report. This work includes assessments in the following areas: the potential of advanced oil and gas extraction technologies as improved through R ampersand D, along with the successful transfer of these technologies to the domestic petroleum industry; the economic and energy impacts of environmental regulations on domestic oil and gas exploration, production, and transportation; the potential of tax incentives to stimulate domestic oil and gas development and production; the potential environmental costs associated with various options for leasing for US oil and gas resources in the Outer Continental Shelf (OCS); and the economic impacts of environmental regulations affecting domestic crude oil refining

Morphological Characterization of African Bush Mango trees (Irvingia species) in the Dahomey Gap (West Africa)

NARCIS (Netherlands)

Vihotogbe, R.; Berg, van den R.G.; Sosef, M.S.M.

2013-01-01

The variation of the morphological characters of bitter and sweet African bush mango trees (Irvingia species) was investigated in the Dahomey Gap which is the West African savannah woodland area separating the Upper and the Lower Guinean rain forest blocks. African bush mangoes have been rated as

Bush skazal ne sovsem to, tshto skazal

Index Scriptorium Estoniae

2006-01-01

USA abivälisminister Euroopa ja Euraasia küsimustes Daniel Fried teatas, et NATO riigid toetavad Gruusia, Moldova ja Aserbaidžaani territoriaalset terviklikkust, kuid ei luba neil seda taastada relva abil. Abiminister selgitab, mida pidas USA president George W. Bush silmas, kui ta avaldas Riia tippkohtumisel toetust Gruusiale tema püüdlustes liituda NATO-ga

Bush asub uue Iraagi-poliitikaga vigu parandama / Kaivo Kopli

Index Scriptorium Estoniae

Kopli, Kaivo

2007-01-01

USA president George W. Bush tutvustas uut Iraagi-strateegiat. Iraaki saadetakse paarkümmend tuhat USA sõdurit, küsitluse andmeil on 61% ameeriklastest lisasõdurite saatmise vastu. Lisa: USA plaanid Iraagis ja Iraagiga

Ion beam characteristics of the controlatron/zetatron family of the gas filled neutron tubes

Energy Technology Data Exchange (ETDEWEB)

Berg, R.S.; Shope, L.A.; O' Neal, M.L.; Boers, J.E.; Bickes, R.W. Jr.

1981-03-01

A gas filled tube used to produce a neutron flux with the D(T,He/sup 4/)n reaction is described. Deuterium and tritium ions generated in a reflex discharge are extracted and accelerated to 100 keV by means of an accelerator electrode onto a deutero-tritide target electrode. The electrodes are designed to focus the ion beam onto the target. Total tube currents consisting of extracted ions, unsuppressed secondary electrons, and ions generated by interactions with the background gas are typically 100 mA. The characteristics of the extracted ion beam are discussed. Accelerating voltages greater than 50 kV are required to focus the beam through the accelerator aperture for configurations that give beams with the proper energy density onto the target. The perveance of the beam is discussed. Maximum perveance values are 2 to 20 nanopervs. Tube focusing and neutron production characteristics are described.

Ultrasonically determined fill pressure and density in closed spherical shells

International Nuclear Information System (INIS)

Asaki, T.J.

1998-01-01

Experiments have been conducted in which the D 2 fill pressure has been determined for several closed millimeter-size aluminum and beryllium shells. The vibrational resonance frequency spectrum of the shells was used to calculate the sound velocity of the interior gas. This velocity, along with the equation-of-state, determined the gas pressure and density. The accuracy in determining the fill conditions is within 0.5% in both pressure and density for near critical density (ρ approx-gt 9 mol/L) gas over a wide range of temperatures (190 K to 300 K). Reduced accuracy was apparent at low density. An attempt was made to determine the fill density of one shell by acoustic observation of the dew point temperature. While this temperature was recorded very accurately, the uncertainty in the saturated vapor density curve near the critical point yielded inaccurate results. These methods were shown to be unaffected by small deviations in the sphericity of the gas-filled cavity

R & D of a Gas-Filled RF Beam Profile Monitor for Intense Neutrino Beam Experiments

Energy Technology Data Exchange (ETDEWEB)

Yonehara, K. [Fermilab; Backfish, M. [Fermilab; Moretti, A. [Fermilab; Tollestrup, A. V. [Fermilab; Watts, A. [Fermilab; Zwaska, R. M. [Fermilab; Abrams, R. [MUONS Inc., Batavia; Cummings, M. A.; Dudas, A. [MUONS Inc., Batavia; Johnson, R. P. [MUONS Inc., Batavia; Kazakevich, G. [MUONS Inc., Batavia; Neubauer, M. [MUONS Inc., Batavia; Liu, Q. [Case Western Reserve U.

2017-05-01

We report the R&D of a novel radiation-robust hadron beam profile monitor based on a gas-filled RF cavity for intense neutrino beam experiments. An equivalent RF circuit model was made and simulated to optimize the RF parameter in a wide beam intensity range. As a result, the maximum acceptable beam intensity in the monitor is significantly increased by using a low-quality factor RF cavity. The plan for the demonstration test is set up to prepare for future neutrino beam experiments.

Dependence of charge collection distributions and dose on the gas type filling the ionization chamber for a p(66)Be(49) clinical neutron beam

International Nuclear Information System (INIS)

Awschalom, M.; Haken, R.K.T.

1985-01-01

Measurements of central axis depth charge distributions (CADCD) in a p(66)Be(49) clinical neutron beam using A-150 TE plastic ionization chambers (IC) have shown that these distributions are dependent on the gas type filling the ICs. IC volumes from 0.1 to 8 cm 3 and nine different gases were investigated. Off axis ratios and build-up measurements do not seem to be as sensitive to gas type. The gas dosimetry constants given in the AAPM Protocol for Neutron Beam Dosimetry for air and methane based TE gases were tested for consistency in water and in TE solution filled phantoms at depths of 10 cm, when used in conjunction with an IC having 5 mm thick walls of A-150. 29 refs., 7 figs., 1 tab

Methods and techniques for obtaining significant discharge measurements on high-voltage bushings

Energy Technology Data Exchange (ETDEWEB)

Jolley, H E.W.

1965-05-01

Forms of discharge tests are described and compared. The use of the Arman and Starr discharge bridge with cathode-ray-tube display is shown to be practicable for bushing testing up to 600 kV. Spurious discharge effects and the precautions necessary to eliminate them are discussed. Consideration is given to calibration methods and to the errors to be expected with various practical circuits. The problem of establishing safe discharge limits for bushings is considered on the basis of a large number of test results and on service experience.

Prosperity against ecology? The environment in the America of G.W. Bush

International Nuclear Information System (INIS)

Delbard, O.

2006-03-01

The author analysis replaces the Bush administration positions in their socio-cultural context and shows the two faces of the USA, the choice of the prosperity facing the ecology and in parallel a country of many free spaces with powerful groups for the environment preservation. After a presentation of the Bush policy in favor of the prosperity facing the environment, he shows the initiatives of movements in favor of the ecology and the environment, and concludes on the today mutations of the public opinion and some enterprises in theses domains. (A.L.B.)

Boumediene v. Bush: Guantanamo Detainees' Right to Habeas Corpus

National Research Council Canada - National Science Library

Garcia, Michael J

2008-01-01

In the consolidated cases of Boumediene v. Bush and Al Odah v. United States, decided June 12, 2008, the Supreme Court held in a 5-4 opinion that aliens designated as enemy combatants and detained at the U.S...

Allergenic sesquiterpene lactones from cushion bush (Leucophyta brownii Cass.)

DEFF Research Database (Denmark)

Paulsen, Evy; Gade Hyldgaard, Mette; Andersen, Klaus E.

2017-01-01

BACKGROUND: The Australian cushion bush (Leucophyta brownii) of the Compositae family of plants has become a popular pot and container plant. The plant produces the sesquiterpene lactone allergen calocephalin. OBJECTIVES: To assess the sensitizing potential of sesquiterpene lactones from cushion ...

The fluid-filling system for the Borexino solar neutrino detector

Science.gov (United States)

Benziger, J.; Cadonati, L.; Calaprice, F.; Chen, M.; Corsi, A.; Dalnoki-Veress, F.; Fernholz, R.; Ford, R.; Galbiati, C.; Goretti, A.; Harding, E.; Ianni, Aldo; Ianni, Andrea; Kidner, S.; Leung, M.; Loeser, F.; McCarty, K.; McKinsey, D.; Nelson, A.; Pocar, A.; Salvo, C.; Schimizzi, D.; Shutt, T.; Sonnenschein, A.

2009-09-01

The system for controlled filling of the nested flexible scintillator containment vessels in the Borexino solar neutrino detector is described. The design and operation principles of pressure and shape monitoring systems are presented for gas filling, gas displacement by water, and water displacement by scintillator. System specifications for safety against overstressing the flexible nylon vessels are defined as well as leak-tightness and cleanliness requirements. The fluid-filling system was a major engineering challenge for the Borexino detector.

ABARE gas market study to evaluate impact of reforms

International Nuclear Information System (INIS)

Harman, J.

2000-01-01

ABARE has conducted Research into the Australian gas market for many years. For example, studies have examined the costs and benefit of interconnections in the gas and electricity markets (Dalziell et al 1993) and the net economic benefits of the oil and gas extraction industry (Hogan et al 1996). The biennial energy supply and demand projections published for more than 20 years) provide detailed and reliable energy forecasts. The most recent study (Bush et al 1999) found that natural gas consumption was expected to grow at an average rate of almost 4.4 percent to 2014-15, representing an increase to around 28 percent of total energy market share. Energy market and policy developments will effect the actual rate of growth of gas consumption. Major trends in the gas market which are raising important issues include an integration of regional gas markets through the construction of new gas pipelines and increasing interstate trade in gas, new access regimes in the transmission and distribution sector, along with increasing customer contestability in the retail markets

Comparing damage on retrieved total elbow replacement bushings with lab worn specimens subjected to varied loading conditions.

Science.gov (United States)

Willing, Ryan

2018-01-09

Complication rates following total elbow replacement (TER) with conventional implants are relatively high due to mechanical failure involving the UHMWPE bushings. Unfortunately, there are no standardized pre-clinical durability testing protocols for assessing the durability of TER components. This study examines the damage observed on retrieved humeral bushings, and then uses in vitro durability testing with two different loading protocols to compare resulting damage. Damage on 25 pairs of retrieved humeral bushings was characterized using micro-computed tomographic imaging techniques. The damage was compared with that of in vitro test specimens which were subjected to 200 K cycles of either high joint reaction force (high JRF) or high varus moment (high VM) loading. Material removal (mass loss) from bushing components was measured using gravimetric techniques. Thinning was less for retrieved bushings which were still assembled in their humeral component, versus bushings which were loose (0.3 ± 0.3 mm vs. 0.6 ± 0.3 mm, p = 0.02). Comparing in vitro test specimens, thinning due to high VM loading was 0.9 ± 0.3 mm, versus 0.2 ± 0.0 mm for high JRF loading (p = 0.08); however, the actual material removal rates from the humeral bushings were not different between the two protocols (48 ± 5 mm 3 /Mc vs. 43 ± 2 mm 3 /Mc, p = 1). Neither loading protocol could produce damage patterns fully representative of the spectrum of damage patterns observed on clinical retrievals. Pre-clinical testing should employ multiple loading protocols to characterize implant performance under a broader spectrum of usage. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Americium/curium bushing melter drain tests

International Nuclear Information System (INIS)

Smith, M.E.; Hardy, B.J.; Smith, M.E.

1997-01-01

Americium and curium were produced in the past at the Savannah River Site (SRS) for research, medical, and radiological applications. They have been stored in a nitric acid solution in an SRS reprocessing facility for a number of years. Vitrification of the americium/curium (Am/Cm) solution will allow the material to be safely stored or transported to the DOE Oak Ridge Reservation. Oak Ridge is responsible for marketing radionuclides for research and medical applications. The bushing melter technology being used in the Am/Cm vitrification research work is also under consideration for the stabilization of other actinides such as neptunium and plutonium. A series of melter drain tests were conducted at the Savannah River Technology Center to determine the relationship between the drain tube assembly operating variables and the resulting pour initiation times, glass flowrates, drain tube temperatures, and stop pour times. Performance criteria such as ability to start and stop pours in a controlled manner were also evaluated. The tests were also intended to provide support of oil modeling of drain tube performance predictions and thermal modeling of the drain tube and drain tube heater assembly. These drain tests were instrumental in the design of subsequent melter drain tube and drain tube heaters for the Am/Cm bushing melter, and therefore in the success of the Am/Cm vitrification and plutonium immobilization programs

Gas-filled Rugby hohlraum energetics and implosions experiments on OMEGA

Science.gov (United States)

Casner, Alexis; Philippe, F.; Tassin, V.; Seytor, P.; Monteil, M. C.; Villette, B.; Reverdin, C.

2010-11-01

Recent experiments [1,2] have validated the x-ray drive enhancement provided by rugby-shaped hohlraums over cylinders in the indirect drive (ID) approach to inertial confinement fusion (ICF). This class of hohlraum is the baseline design for the Laser Mégajoule program, is also applicable to the National Ignition Facility and could therefore benefit ID Inertial Fusion Energy studies. We have carried out a serie of energetics and implosions experiments with OMEGA ``scale 1'' rugby hohlraums [1,2]. For empty hohlraums these experiments provide complementary measurements of backscattered light along 42 cone, as well as detailed drive history. In the case of gas-filled rugby hohlraums we have also study implosion performance (symmetry, yield, bangtime, hotspot spectra...) using a high contrast shaped pulse leading to a different implosion regime and for a range of capsule convergence ratios. These results will be compared with FCI2 hydrocodes calculations and future experimental campaigns will be suggested. [4pt] [1] F. Philippe et al., Phys. Rev. Lett. 104, 035004 (2010). [0pt] [2] H. Robey et al., Phys. Plasnas 17, 056313 (2010).

Convergent ablation measurements with gas-filled rugby hohlraum on OMEGA

International Nuclear Information System (INIS)

Casner, A.; Jalinaud, T.; Galmiche, D.

2016-01-01

Convergent ablation experiments with gas-filled rugby hohlraum were performed for the first time on the OMEGA laser facility. A time resolved 1D streaked radiography of capsule implosion is acquired in the direction perpendicular to hohlraum axis, whereas a 2D gated radiography is acquired at the same time along the hohlraum axis on a x-ray framing camera. The implosion trajectory has been measured for various kinds of uniformly doped ablators, including germanium-doped and silicon-doped polymers (CH), at two different doping fraction (2% and 4% at.). Our experiments aimed also at measuring the implosion performance of laminated capsules. A laminated ablator is constituted by thin alternate layers of un-doped and doped CH. It has been previously shown in planar geometry that laminated ablators could mitigate Rayleigh Taylor growth at ablation front. Our results confirm that the implosion of a capsule constituted with a uniform or laminated ablator behaves similarly, in accordance with post-shot simulations performed with the CEA hydrocode FCI2. (paper)

Improvement of the 36Cl-AMS system at MALT using a Monte Carlo ion-trajectory simulation in a gas-filled magnet

International Nuclear Information System (INIS)

Aze, Takahiro; Matsuzaki, Hiroyuki; Matsumura, Hiroshi; Nagai, Hisao; Fujimura, Masatsugu; Noguchi, Mayumi; Hongo, Yayoi; Yokoyama, Yusuke

2007-01-01

We developed and experimentally confirmed a Monte Carlo simulation code to describe the trajectories of 36 Cl and 36 S ions in a gas-filled magnet (GFM) at the MALT, University of Tokyo. The simulation revealed that the central trajectories of the ions in the GFM are almost spiral and most of the 36 S ions collided with the interior wall of the GFM. Based on this property of the trajectories, we have found a more advantageous condition for suppressing 36 S. As a result, the background level of the 36 Cl/Cl ratio was lowered to 10 -15

BUDDLEJA DAVIDII (BUTTERFLY BUSH): A GROWING THREAT TO RIPARIA?

Science.gov (United States)

Buddleja davidii, an Asian shrub or small tree (family Buddlejaceae; commonly referred to as Butterfly bush) is found in the United States, New Zealand, Australia, and Europe as a popular ornamental and an aggressive invasive that has become widespread in floodplains, riverbeds, ...

Response of total phenolic content and antioxidant activities of bush

African Journals Online (AJOL)

user

OF BUSH TEA AND SPECIAL TEA USING DIFFERENT SELECTED. EXTRACTION ... 3,3'digallate and caffeine). Tea leaves have ..... Effects of solvent extraction on phenolic content and ... Critical Reviews in Food Science and Nutrition,.

The Second Administration of George W. Bush and U.S.-Russia Relations

Directory of Open Access Journals (Sweden)

Rybalko Olga

2014-12-01

Full Text Available This article is devoted to the analysis of changes in the U.S.-Russia relationships during the presidency of George W. Bush and to the detection of the origins of these changes. The attention is paid to conceptual foreign policy views of the most influential members of administration. The renewal of staff in U.S. administration was one of the important factors of toughening the Russian course of the American foreign policy. At the beginning of the second presidency of George Bush the ratio of forces in the American Congress changed. Opposition forces received the majority in the Congress. This circumstance became the other reason of change of the U.S.-Russia relationships. The bilateral relations during the specified period were complicated by aspiration of the USA to strengthen the influence on the territories of the Post-Soviet states. It caused discontent of Moscow. At the same time, some aspects of the Russian-Iranian nuclear cooperation caused criticism of Washington. The role of personal diplomacy is noted as a factor of forming bilateral relations. During the second term of the presidency of George W. Bush this factor didn't lose its value in comparison with the first term. The article gives the assessment of work of the Bush’s second administration at the Russian direction. The author notes the American focus on the strategy of “selective partnership” with Russia. The conclusion is drawn on George Bush's aspiration to preservation of balance in the U.S.-Russia relations under the conditions of increasing strains.

Increased LNG into North America may threaten northern/Arctic gas development

International Nuclear Information System (INIS)

Howard, P.

2006-01-01

Since 2000, liquefied natural gas (LNG) has attracted considerable attention in response to record high price, high demand and tight supply of natural gas. LNG trade is expected to be 18 per cent of North American gas supply by 2020. The natural gas market is also affected by demand dominated by gas-fired power generation. The balance between supply and demand, combined with external factors of economic upsets and weather, has resulted in a volatile market place. LNG can currently be landed in North American at prices that compete with the average continental well head price. In January 2006, there were more than 60 competing LNG regasification projects proposed to access the North American gas market. This presentation listed the proposed facilities to import LNG and emphasized the need for a comprehensive analysis of gas development, given the degree of uncertainty regarding significant investment in gas supply, demand, pipelines and LNG projects. While only a few of the proposed projects will actually be constructed, they will more than double the existing output by 2010. The many possible changes in regional marketplace conditions were discussed with particular attention to the effects on the economic viability of natural gas developments; the impacts of LNG imports on capacities and flows in natural gas pipeline corridors; and, the influence of increased natural gas supplies on local and regional prices. It was noted that since conventional resources in Canada and the United States have reached a plateau, the next logical supply sources are Alaska, the Beaufort Sea, the Mackenzie Delta and the Arctic Islands. However, the development of northern and Arctic gas resources may be delayed if the level of LNG imports is sufficient to fill the deficiency in supply and demand. tabs., figs

Bush encroachment monitoring using multi-temporal Landsat data and random forests

Science.gov (United States)

Symeonakis, E.; Higginbottom, T.

2014-11-01

It is widely accepted that land degradation and desertification (LDD) are serious global threats to humans and the environment. Around a third of savannahs in Africa are affected by LDD processes that may lead to substantial declines in ecosystem functioning and services. Indirectly, LDD can be monitored using relevant indicators. The encroachment of woody plants into grasslands, and the subsequent conversion of savannahs and open woodlands into shrublands, has attracted a lot of attention over the last decades and has been identified as a potential indicator of LDD. Mapping bush encroachment over large areas can only effectively be done using Earth Observation (EO) data and techniques. However, the accurate assessment of large-scale savannah degradation through bush encroachment with satellite imagery remains a formidable task due to the fact that on the satellite data vegetation variability in response to highly variable rainfall patterns might obscure the underlying degradation processes. Here, we present a methodological framework for the monitoring of bush encroachment-related land degradation in a savannah environment in the Northwest Province of South Africa. We utilise multi-temporal Landsat TM and ETM+ (SLC-on) data from 1989 until 2009, mostly from the dry-season, and ancillary data in a GIS environment. We then use the machine learning classification approach of random forests to identify the extent of encroachment over the 20-year period. The results show that in the area of study, bush encroachment is as alarming as permanent vegetation loss. The classification of the year 2009 is validated yielding low commission and omission errors and high k-statistic values for the grasses and woody vegetation classes. Our approach is a step towards a rigorous and effective savannah degradation assessment.

filled neutron detectors

Indian Academy of Sciences (India)

Boron trifluoride (BF3) proportional counters are used as detectors for thermal neutrons. They are characterized by high neutron sensitivity and good gamma discriminating properties. Most practical BF3 counters are filled with pure boron trifluoride gas enriched up to 96% 10B. But BF3 is not an ideal proportional counter ...

Design status and procurement activities of the High Voltage Deck 1 and Bushing for the ITER Neutral Beam Injector

International Nuclear Information System (INIS)

Boldrin, Marco; De Lorenzi, Antonio; Decamps, Hans; Grando, Luca; Simon, Muriel; Toigo, Vanni

2013-01-01

Highlights: ► ITER Neutral Beam Injector includes several non-standard components. ► The design status of the −1 MV dc HVD1 and Bushing is described. ► The paper reports also on the integrated layout of the two components. ► Preliminary electrostatic and thermal analyses are presented. ► Procurement activities are outlined. -- Abstract: The ITER Neutral Beam Injector (NBI) power supply system includes several non-standard components, whose ratings go beyond the present industrial practice. Two of these items, to be procured by Fusion for Energy, are: 1.A −1 MV dc air-insulated Faraday cage, called High Voltage Deck 1 (HVD1), hosting the Ion Source and Extractor Power Supplies (ISEPS) and the associated diagnostics. 2.A −1 MV dc feedthrough, called HVD1-TL Bushing, aimed at connecting the HVD1 to the gas (SF 6 ) insulated Transmission Line (TL), containing inside its High Voltage (HV) conductor all ISEPS power and control cables coming from the HVD1 to be connected to the NBI Ion Source services. The paper deals with the status of the design of the HVD1 and HVD1-TL Bushing, focusing on insulation, mechanical and thermal issues as well as on their integration with the other components of the power supply system. In particular, the insulation issue of the integrated system has been addressed by means of an electrostatic Finite Element (FE) analysis whilst a FE thermal simulation has been carried out to assess the impact of the dissipation of the proposed design of the inner conductors (ISEPS conductors) not actively cooled. Finally, the paper describes the status of procurement strategy and execution

Baltic leaders jockey with Bush to get their message across

Index Scriptorium Estoniae

2005-01-01

USA president George Bush lubas pärast kõnelemist Mart Laari ning Vaira Vike-Freibergaga arutada kohtumisel president Vladimir Putiniga suhteid Venemaa ja Balti riikide vahel. Lisa: Vladimir Putini arvamus Molotovi-Ribbentropi pakti kohta

FABRICATION OF GAS-FILLED TUNGSTEN-COATED GLASS SHELLS

International Nuclear Information System (INIS)

NIKROO, A; BAUGH, W; STEINMAN, D.A.

2003-09-01

OAK-B135 Deuterium (D 2 ) filled glass shells coated with a high Z element are needed for high energy density (HED) experiments by researchers at Los Alamos National Laboratory. They report here on our initial attempt to produce such shells. Glass shells made using the drop tower technique were coated with gold, palladium or tungsten, or a mixture of two of these elements. It was found that gold and palladium coatings did not stick well to the glass and resulted in poor or delaminated films. Tungsten coatings resulted in films suitable for these targets. Bouncing of shells during coating resulted in uniform tungsten coatings, but the surface of such coatings were filled with small nodules. Proper agitation of shells using a tapping technique resulted in smooth films with minimal particulate contamination. For coating rates of ∼ 0.15 (micro)m/hr coatings with ∼ 2 nm RMS surface finish could be deposited. The surface roughness of coatings at higher rates, 0.7 (micro)m/hr, was considerably worse (∼ 100 nm RMS). The columnar structure of the coatings allowed permeation filling of the tungsten coated glass shells with deuterium at 300 C

Convergent ablation measurements of plastic ablators in gas-filled rugby hohlraums on OMEGA

Science.gov (United States)

Casner, A.; Jalinaud, T.; Masse, L.; Galmiche, D.

2015-10-01

Indirect-drive implosions experiments were conducted on the Omega Laser Facility to test the performance of uniformly doped plastic ablators for Inertial Confinement Fusion. The first convergent ablation measurements in gas-filled rugby hohlraums are reported. Ignition relevant limb velocities in the range from 150 to 300 μm .n s-1 have been reached by varying the laser drive energy and the initial capsule aspect ratio. The measured capsule trajectory and implosion velocity are in good agreement with 2D integrated simulations and a zero-dimensional modeling of the implosions. We demonstrate experimentally the scaling law for the maximum implosion velocity predicted by the improved rocket model [Y. Saillard, Nucl. Fusion 46, 1017 (2006)] in the high-ablation regime case.

Bushes of vibrational modes for Fermi-Pasta-Ulam chains

Science.gov (United States)

Chechin, G. M.; Novikova, N. V.; Abramenko, A. A.

2002-06-01

Some exact solutions and multimode invariant submanifolds were found for the Fermi-Pasta-Ulam (FPU)- β model by Poggi and Ruffo [Physica D 103 (1997) 251]. In the present paper we demonstrate how results of such a type can be obtained for an arbitraryN-particle chain with periodic boundary conditions with the aid of our group-theoretical approach [Physica D 117 (1998) 43] based on the concept of bushes of normal modes in mechanical systems with discrete symmetry. The integro-differential equation describing the FPU- α dynamics in the modal space is derived. The loss of stability of the bushes of modes for the FPU- α model, in particular, for the limiting case N→∞ for the dynamical regime with displacement pattern having period twice the lattice spacing ( π-mode) is studied. Our results for the FPU- α chain are compared with those by Poggi and Ruffo for the FPU- β chain.

Oliver Stone : "Bush oli paadialune!" / Oliver Stone ; interv. Margit Tõnson

Index Scriptorium Estoniae

Stone, Oliver

2008-01-01

Kreekas, Thessaloniki filmifestivalil antud intervjuu. Festivalil linastus režissööri mängufilm "W", mille peaosas George Bush jun. (mängib Josh Brolin). Lisaks filmist : ""W" - ümbersündinud mehe kentsakas portree"

Comparison of intraocular pressure measured by non-contact air puff versus Goldmann applanation tonometers in gas-filled vitrectomized eyes.

Science.gov (United States)

Patikulsila, Direk; Taweemankongsab, Srisuda; Ngamtipakorn, Supob

2003-05-01

To compare intraocular pressure (IOP) measured by two different instruments, air puff tonometer (APT) versus Goldmann applanation tonometer (GAT), in gas-filled vitrectomized eyes. Three-month, prospective, comparative trial. Thirty-eight patients (38 eyes), who underwent a pars plana vitrectomy (PPV) with gas injection, were enrolled in the study. The IOP was measured by an APT, followed by GAT within 10 minutes by two different, masked investigators. IOPs were measured by two methods and then were compared. Overall, there was a high correlation between both measurements (r = 0.908, p 0.05). By a subgroup analysis of 17 eyes with IOP measured by a GAT of 21 mmHg or less, the APT readings (15.28 +/- 4.81) and GAT readings (14.47 +/- 3.89) were not significantly different (p > 0.05). Of 21 eyes, with IOP measured by a GAT of 22 mmHg or more, the APT readings (26.88 +/- 8.81) were significantly lower than those obtained by the GAT (29.62 +/- 7.69) (p < 0.05). In gas-filled vitrectomized eyes, IOP measurements obtained by an APT correlated well with those obtained by GAT, especially when the IOP was within normal range. However, in eyes with elevated IOP, the APT significantly underestimated the IOP measurement when compared to the gold standard, GAT.

Development of Gas Electron Multiplier(GEM) for digital radiographic system

International Nuclear Information System (INIS)

Moon, B. S.; Chung, C. E.; Lee, J. W.

2000-04-01

Two computer programs SHOWFIELD and IMAGEQUAL have been developed. SHOWFIELD is used to draw electric field lines for GEM detectors and IMAGEQUAL is used to study the spatial resolution of x-ray images. Various simulation runs have been carried out using EGS4 to study the characteristics of electrons generated by micro-channel plates and Ar, Xe gases. A prototype GEM detector was developed through this project. The GEM detector is composed of a pair of GEM plates, a micro-channel plate, readout circuit in a gas filled chamber. GEM plate were made in CERN to meet KAERI's design specification and the micro-channel plates were purchased from Proxitronic company

Assessing the Debt: George W. Bush's Legacy and the Future of Public Education under Barack Obama

Science.gov (United States)

Means, Alex; Taylor, Kendall

2010-01-01

This article utilizes Gloria Ladson-Billings' notion of educational debt in order to explore the historical, economic, and cultural politics of education reform under George W. Bush and Barack Obama. It tracks the No Child Left Behind Act across a number of fields in order to claim that Bush's expansion of the educational debt should be understood…

Age determination in the bush squirrel, Paraxerus cepapi cepapi ...

African Journals Online (AJOL)

Tooth eruption and wear, measurements of skulls, eye-lens mass determination and different aspects of phallic morphology were used in an attempt at age classification in the bush squirrel, Paraxerus c. cepapi. The first method proved the most practical and allowed for three immature and three adult age classes.

Integrated PC-based system for detecting and parameter monitoring at the Dubna Gas Filled Recoil Separator

International Nuclear Information System (INIS)

Tsyganov, Yu.S.; Polyakov, A.N.; Sukhov, A.M.

2012-01-01

New detection system of the Dubna Gas Filled Recoil Separator (DGFRS) was put into operation in May 2012. It includes 32-strip position sensitive PIPS detector manufactured by CANBERRA NV, 24-strip back side PIPS detector, 8-strip V ETO P IPS detector, time-of-flight low pressure (∼1.7 Torr) pentane-filled gaseous detector, CAMAC fast ADC's with 5 μs dead time per three signals (energy, top position, bottom position), modified CC012 crate controller and PC-based C ++ Builder code for spectrometry data acquisition. New parameter monitoring system (project) is reported too together with the brief review of the present system. It is planned to put into operation with this system during 2013-2014. Examples of applications in the long-term experiments aimed at the synthesis of superheavy elements in 48 Ca induced complete fusion nuclear reactions are also presented. Namely with the DGFRS facility 45 new isotopes of superheavy nuclei were synthesized since 2001

Lifetime and shelf life of sealed tritium-filled plasma focus chambers with gas generator

Directory of Open Access Journals (Sweden)

B.D. Lemeshko

2017-11-01

Full Text Available The paper describes the operation features of plasma focus chambers using deuterium–tritium mixture. Handling tritium requires the use of sealed, vacuum-tight plasma focus chambers. In these chambers, there is an accumulation of the impurity gases released from the inside surfaces of the electrodes and the insulator while moving plasma current sheath inside chambers interacting with β-electrons generated due to the decay of tritium. Decay of tritium is also accompanied by the accumulation of helium. Impurities lead to a decreased yield of neutron emission from plasma focus chambers, especially for long term operation. The paper presents an option of absorption type gas generator in the chamber based on porous titanium, which allows to significantly increase the lifetime and shelf life of tritium chambers. It also shows the results of experiments on the comparison of the operation of sealed plasma focus chambers with and without the gas generator. Keywords: Plasma focus, Neutron yield, Tritium-filled plasma focus chambers, PACS Codes: 29.25.-v, 52.58.Lq

Modular data acquisition system and its use in gas-filled detector readout at ESRF

Science.gov (United States)

Sever, F.; Epaud, F.; Poncet, F.; Grave, M.; Rey-Bakaikoa, V.

1996-09-01

Since 1992, 18 ESRF beamlines are open to users. Although the data acquisition requirements vary a lot from one beamline to another, we are trying to implement a modular data acquisition system architecture that would fit with the maximum number of acquisition projects at ESRF. Common to all of these systems are large acquisition memories and the requirement to visualize the data during an acquisition run and to transfer them quickly after the run to safe storage. We developed a general memory API handling the acquisition memory and its organization and another library that provides calls for transferring the data over TCP/IP sockets. Interesting utility programs using these libraries are the `online display' program and the `data transfer' program. The data transfer program as well as an acquisition control program rely on our well-established `device server model', which was originally designed for the machine control system and then successfully reused in beamline control systems. In the second half of this paper, the acquisition system for a 2D gas-filled detector is presented, which is one of the first concrete examples using the proposed modular data acquisition architecture.

George W. Bush's Post-September 11 Rhetoric of Covenant Renewal: Upholding the Faith of the Greatest Generation

Science.gov (United States)

Bostdorff, Denise M.

2003-01-01

The appeal of Bush's post-September 11 discourse lies in its similarities with the Puritan rhetoric of covenant renewal by which ministers brought second- and third-generation Puritans into the church. Through this epideictic discourse, Bush implored younger Americans to uphold the national covenant of their "elders," the World War II generation,…

The insurance industry and unconventional gas development: Gaps and recommendations

International Nuclear Information System (INIS)

Wetherell, Daniel; Evensen, Darrick

2016-01-01

The increasingly growing and controversial practice of natural gas development by horizontal drilling and high volume hydraulic fracturing (‘fracking’) faces a severe environmental insurance deficit at the industry level. Part of this deficit is arguably inherent to the process, whereas another part is caused by current risk information shortfalls on the processes and impacts associated with development. In the short and long terms, there are several conventional and unconventional methods by which industry-level and governmental-level policy can insure against these risks. Whilst academic attention has been afforded to the potential risks associated with unconventional natural gas development, little consideration has been given to the lack of insurance opportunities against these risks or to the additional risks promulgated by the dearth of insurance options. We chronicle the ways in which insurance options are limited due to unconventional gas development, the problems caused by lack of insurance offerings, and we highlight potential policy remedies for addressing these gaps, including a range of government- and industry-specific approaches. - Highlights: •A gap exists in provision of liability insurance for ‘fracking’-related risks. •The market gap is due primarily to uncertainties about probabilistic risk. •Insurance for risks similar to ‘fracking’ highlight potential policy options. •Government regulation and/or industry agreements can effectively fill the gap. •Policies on insurance and liability coverage necessitate ethical considerations.

The economics of landscape restoration: Benefits of controlling bush encroachment and invasive plant species in South Africa and Namibia

CSIR Research Space (South Africa)

Stafford, William

2017-01-01

Full Text Available Bush encroachment and alien plant invasions alter the composition and/or balance of species in natural ecosystems and impact biodiversity, land productivity and water availability. Therefore, the appropriate control and management of bush...

Design status and procurement activities of the High Voltage Deck 1 and Bushing for the ITER Neutral Beam Injector

Energy Technology Data Exchange (ETDEWEB)

Boldrin, Marco, E-mail: marco.boldrin@igi.cnr.it [Consorzio RFX, Associazione EURATOM-ENEA sulla Fusione, Corso Stati Uniti 4, I-35127 Padova (Italy); De Lorenzi, Antonio [Consorzio RFX, Associazione EURATOM-ENEA sulla Fusione, Corso Stati Uniti 4, I-35127 Padova (Italy); Decamps, Hans [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Grando, Luca [Consorzio RFX, Associazione EURATOM-ENEA sulla Fusione, Corso Stati Uniti 4, I-35127 Padova (Italy); Simon, Muriel [Fusion For Energy, c/ Josep Pla 2, 08019 Barcelona (Spain); Toigo, Vanni [Consorzio RFX, Associazione EURATOM-ENEA sulla Fusione, Corso Stati Uniti 4, I-35127 Padova (Italy)

2013-10-15

Highlights: ► ITER Neutral Beam Injector includes several non-standard components. ► The design status of the −1 MV{sub dc} HVD1 and Bushing is described. ► The paper reports also on the integrated layout of the two components. ► Preliminary electrostatic and thermal analyses are presented. ► Procurement activities are outlined. -- Abstract: The ITER Neutral Beam Injector (NBI) power supply system includes several non-standard components, whose ratings go beyond the present industrial practice. Two of these items, to be procured by Fusion for Energy, are: 1.A −1 MV{sub dc} air-insulated Faraday cage, called High Voltage Deck 1 (HVD1), hosting the Ion Source and Extractor Power Supplies (ISEPS) and the associated diagnostics. 2.A −1 MV{sub dc} feedthrough, called HVD1-TL Bushing, aimed at connecting the HVD1 to the gas (SF{sub 6}) insulated Transmission Line (TL), containing inside its High Voltage (HV) conductor all ISEPS power and control cables coming from the HVD1 to be connected to the NBI Ion Source services. The paper deals with the status of the design of the HVD1 and HVD1-TL Bushing, focusing on insulation, mechanical and thermal issues as well as on their integration with the other components of the power supply system. In particular, the insulation issue of the integrated system has been addressed by means of an electrostatic Finite Element (FE) analysis whilst a FE thermal simulation has been carried out to assess the impact of the dissipation of the proposed design of the inner conductors (ISEPS conductors) not actively cooled. Finally, the paper describes the status of procurement strategy and execution.

Space-filling polyhedral sorbents

Energy Technology Data Exchange (ETDEWEB)

Haaland, Peter

2016-06-21

Solid sorbents, systems, and methods for pumping, storage, and purification of gases are disclosed. They derive from the dynamics of porous and free convection for specific gas/sorbent combinations and use space filling polyhedral microliths with facial aplanarities to produce sorbent arrays with interpenetrating interstitial manifolds of voids.

Systematic notes on Asian birds. 1. A review of the russet bush-warbler Bradypterus seebohmi (Ogilvie-Grant, 1895)

NARCIS (Netherlands)

Dickinson, E.C.; Rasmussen, P.C.; Round, P.D.; Rozendaal, F.G.

2000-01-01

The bush-warbler Bradypterus mandelli (Brooks, 1875) was described from Sikkim, and numerous specimens from India were identified with it, but it was synonymised with the brown bush-warbler Bradypterus luteoventris (Hodgson, 1845) in 1881. In 1952, east Asian populations were grouped under the name

Neotropical Zoonotic Parasites in Bush Dogs (Speothos venaticus) from Upper Paraná Atlantic Forests in Misiones, Argentina.

Science.gov (United States)

Vizcaychipi, Katherina A; Rinas, Miguel; Irazu, Lucia; Miyagi, Adriana; Argüelles, Carina F; DeMatteo, Karen E

2016-10-01

Wildlife remains an important source of zoonotic diseases for the most vulnerable groups of humans, primarily those living in rural areas or coexisting with forest. The Upper Paraná Atlantic forest of Misiones, Argentina is facing ongoing environmental and anthropogenic changes, which affect the local biodiversity, including the bush dog (Speothos venaticus), a small canid considered Near Threatened globally and Endangered locally. This project aimed to expand the knowledge of zoonotic parasites present in the bush dog and the potential implications for human health and conservation medicine. From May to August 2011, a detection dog located 34 scats that were genetically confirmed as bush dog and georeferenced to northern Misiones. Of these 34 scats, 27 had sufficient quantity that allowed processing for zoonotic parasites using morphological (sedimentation and flotation) and antigen (coproantigen technique) analyses. Within these 27 scats, we determined that the parasitic prevalence was 63.0% (n = 17) with 8 (47.1%) having mixed infections with 2-4 parasitic genera. No significant differences (p > 0.05) between sampling areas, sex, and parasite taxa were found. We were able to summarize the predominant nematodes (Ancylostoma caninum, Toxocara canis, and Lagochilascaris spp.), cestodes (Taenia spp. and Spirometra spp.), and apicomplexa (Cystoisospora caninum) found in these bush dogs. With the copro-ELISA technique, 14.8% (n = 4) of the samples were positive for Echinococcus spp. This study represents the first comprehensive study about parasitic fauna with zoonotic potential in the free-ranging bush dog. This information combined with the innovative set of techniques used to collect the samples constitute a valuable contribution that can be used in control programs, surveillance of zoonotic diseases, and wildlife conservation, both regionally and across the bush dog's broad distribution.

Oversimplifying Iraq's challenges: Bush's Fort Bragg speech and americans' declining support for the war

Directory of Open Access Journals (Sweden)

Carlos L. Yordan

2009-11-01

Full Text Available Este artículo examina el porqué el presidente George W. Bush no pudo recolectar la ayuda de la ciudadanía americana para su estrategia para la estabilización y la transformación de Iraq. De hecho, esta estrategia ha sido afectada por el desplegar de los acontecimientos que sucedieron en Iraq, pero el problema principal reside en las posiciones que el presidente utilizó para simplificar los desafíos que el ejército americano y la diplomacia tenían que hacer frente en Iraq, buscando la aprobación de las criticas periodisticas, de los expertos gubernamentales y de los juristas. En más de una perspectiva la falta de aprobación del gobierno Bush en Iraq es una consecuencia de la carencia de la confianza que la opinión pública tuvo por su presidente y sus consejeros para lograr sus objetivos en Iraq. Para constatar esta tesis, el artículo analiza el discurso del presidente a la nación, difundida en horario de punta el 28 de julio de 2005, que demuestra que los americanos no estaban demasiado convencidos de la estrategia de Bush._____________ABSTRACT:This article puts in context why President of the United States of America George W. Bush has been unable to rally American support for his strategy to stabilize and transform Iraq. Since the summer of 2003, when Iraqis started to challenge the authority of the Anglo-American occupation, the White House has been on the defensive, while American support for post-war efforts has dwindled. While developments in Iraq have affected the strategy’s execution, the main problem is the president’s inclination to oversimplify the challenges American troops and diplomats are facing in Iraq, inviting criticism from journalists, experts on nation-building and lawmakers. In many ways, declining approval of Bush’s handling of Iraq results in the public’s lack of confidence that the president and his advisors will be able to accomplish its goals in Iraq. To test this argument, the article analyzes

Grow tubes change microclimate and bush architecture but have little effect on bush biomass allocation at the end of the establishment year in blueberry

Science.gov (United States)

Microclimate variables were integrated over a six-month period during which blueberry (Vaccinium corymbosum cv. Liberty) bushes were grown in 51-cm high, 20-cm diameter round grow tubes (opaque or translucent) on a sawdust mulch-covered raised bed with the mulch incorporated into tilled soil. Grow t...

Marksmen and the bush: The affective micro-politics of landscape, sex and technology in precolonial South-Central Africa

Directory of Open Access Journals (Sweden)

Kathryn M. de Luna

Full Text Available This essay explores what we can know about the micro-politics of knowledge production using the history of bushcraft as a case study. In many societies in central, eastern and southern Africa, practitioners of technologies undertaken away from the village, in the bush, enjoy a special status. Among the Botatwe-speaking societies of south-central Africa, the status accorded hunters, smelters and other technicians of the bush was crafted in the centuries around the turn of the first millennium by combining old ideas about the blustery character of fame and spirits, and the talk that engendered both with the observation that technicians working in the bush shared a kinesthetic experience of piercing, poking and prodding into action during the generative activities of working smelts and taking down game. Yet the micro-politics of bushcraft knowledge also involved the bodies and feelings of spearmen and metallurgists' wives, lovers, mothers, sisters, and sometimes those of the entire neighbourhood. The invention of a new landscape category, isokwe, and the novel status of these seasonal technicians marks the development of a new kind of virile masculinity available to some men; it was a status with deeply sensuous, material and social meanings for women as well.

Self-orthogonal codes from some bush-type Hadamard matrices ...

African Journals Online (AJOL)

By means of a construction method outlined by Harada and Tonchev, we determine some non-binary self-orthogonal codes obtained from the row span of orbit matrices of Bush-type Hadamard matrices that admit a xed-point-free and xed-block-free automorphism of prime order. We show that the code [20; 15; 4]5 obtained ...

Gas, gas, gas... discoveries and developments booming worldwide

International Nuclear Information System (INIS)

Maxwell, F.

2000-01-01

Deep water exploration is yielding more than billion barrel oil fields. Unocal's 3 May discovery of 2-3 Tcf of gas in its Kutei block of Indonesia marks the first major discovery of natural gas in the deep water frontier: Wildcats Gula and Gada were drilled in over 1800 m of water as part of an aggressive search for gas instigated by Unocal last year. The author makes a survey of gas exploration and development throughout the world. (author)

Bush annab kinga kindralitele Iraagis, vahetub ka luurejuht / Kaivo Kopli

Index Scriptorium Estoniae

Kopli, Kaivo

2007-01-01

Vaatlejate hinnangul esitab president Bush uue Iraagi-strateegia, mis näeb ette lisaks kuni 20 000 sõjaväelase Iraaki saatmist ning muudatusi sõjalises juhtkonnas. Ametist lahkuvad Iraagis vägesid juhatav kindral George Casey ning Iraagi ja Afganistani operatsioonide üldjuht John Abizaid

Creosote bush lignans for human disease treatment and prevention: Perspectives on combination therapy

Directory of Open Access Journals (Sweden)

John Gnabre

2015-07-01

Full Text Available The medicinal properties of the most successful plant in the deserts of the western hemisphere, the creosote bush (Larrea tridentata, are evidenced by the long traditional usage of the plants by the Native Americans Indian tribes in Southwestern North America and the Amerindians from South America. The plant is rich in simple bisphenyl lignans and tricyclic lignans known as cyclolignans. These compounds are responsible for many of the pharmacological activities of extracts of the plants. Some of these activities, namely antiherpes, antioxidant, antifungal, and anti-inflammatory, were known a century ago. Only recently have further studies revealed other crucial activities of the same plant molecules as powerful agents against human immunodeficiency virus, human papillomavirus, cancer, neurodegenerative diseases, and symptoms of aging. Molecular mechanisms underlying the antiviral and anticancer activities have been elucidated and involve the inhibition of SP1 dependent gene transcription. This review summarizes the recent findings on creosote bush lignans. We introduce the concept of a cocktail of safe well-characterized natural products from the creosote bush that would represent a bridge between oriental herbal medicines and Western drug-based therapies.

Numerical simulation of mould filling process for pressure plate and valve handle in LFC

Directory of Open Access Journals (Sweden)

Jiang Junxia

2010-11-01

Full Text Available In lost foam casting (LFC, the distribution of polymer beads during the bead filling process is not uniform, and the collision between polymer beads determines the distribution of two-phase flow of gas and solid. The interaction between the gas and solid phases reveals as coupling effect of the force that gas exerts on particles or vice versa, or that among particles. The gas-solid flow in filling process is nonlinearity, which makes the coupling effect an essential point to carry out a simulation properly. Therefore, information of each particle’s motion is important for acquiring the law of filling process. In bead filling process, compressed air is pressed into mold cavity, and discharged from gas vent, creating a pressure difference between outer and inner space near the gas vent. This pressure difference directly changes the spatial distribution and motion trace of gas and solid phases. In this paper, Discrete Element Method (DEM and Computational Fluid Dynamics (CFD are employed to simulate the fluid dynamic character based on Newton’s Third Law of Motion. The simulation results of some casting products such as pressure plate and valve handle are compared with the result obtained from practical experiment in order to test the feasibility of DEM. The comparison shows that this DEM method can be a very promising tool in the mould filling simulation of beads’ movement.

Neotropical echinococcosis: second report of Echinococcus vogeli natural infection in its main definitive host, the bush dog (Speothos venaticus).

Science.gov (United States)

do Carmo Pereira Soares, Manoel; Souza de Souza, Alex Junior; Pinheiro Malheiros, Andreza; Nunes, Heloisa Marceliano; Almeida Carneiro, Liliane; Alves, Max Moreira; Farias da Conceição, Bernardo; Gomes-Gouvêa, Michele Soares; Marins Póvoa, Marinete

2014-04-01

The bush dog (Speothos venaticus) acts as the natural definitive host in the life cycle of Echinococcus vogeli, the causative agent of polycystic hydatid disease, a zoonotic neglected disease in the South America. We report a case of natural infection by Echinococcus vogeli in a bush dog from the Brazilian Amazon, confirmed by the morphological and morphometric examination of adult parasites and their hooks obtained from the small intestine of the canid. Additionally, mitochondrial DNA sequence analysis corroborated these findings. This is the second report of natural infection by E. vogeli in a bush dog. © 2013.

Response of total phenolic content and antioxidant activities of bush ...

African Journals Online (AJOL)

The positive health benefits associated with tea are made possible by the antioxidant activity of phenolic compounds present in tea. The total phenolic content and antioxidant activity of bush tea (Athrixia phylicoides DC.) and special tea (Monsonia burkeana) were studied. The extractions were done in triplicate using cold ...

Putin, Bush issue statement on advancing US-Russian human contacts

CERN Multimedia

2002-01-01

"In addition to interstate, bilateral, regional and global issues discussed by Russian President Vladimir Putin and US President George Bush during their Kremlin summit on 24 May, the two leaders considered issues related to people-to-people contacts, ties between cities, states and regions, institutions and organizations" (1 page).

Evaluation of effect of low opening operation on increasing wear of bearing bushings of guide vanes used in hydropower plants

International Nuclear Information System (INIS)

Kim, Jong Sung; Kim, Se Na

2012-01-01

A guide vane plays a key role in controlling the flow rate of water supplied to the turbine of a hydropower plant. It has been reported that guide vane bearing bushings are subjected to considerable wear, which requires them to be maintained. An ancillary service such as frequency control and black start causes cyclic low opening operation of the guide vanes. It is empirically well known that such operation increases the wear rate of the guide vane bearing bushing. In this study, the effect of low opening operation on the increasing wear of the guide vane bearing bushing is quantitatively assessed via finite element flow analysis, finite element stress analysis, and relative wear evaluation. As a result of the assessment, it is identified that the pressure applied on the guide vane surface increases and the contact length between the outer surface of the guide vane stem and the inner surface of the bearing bushing decreases with a decrease in the opening of the guide vane. In addition, low opening of the guide vanes results in an increase in the relative wear owing to the generation of high contact pressure on the bearing bushing surfaces

effect of bush burning on herbaceous plant diversity in lagos state

African Journals Online (AJOL)

conducted to assess the effect of bush burning on plant species diversity. Three frequently burnt ... also believed to rid the grassland of parasitic insects and to prevent the encroachment of ..... The effect of smoke inhalation on lung function and ...

Modular data acquisition system and its use in gas-filled detector readout at ESRF

International Nuclear Information System (INIS)

Sever, F.; Epaud, F.; Poncet, F.; Grave, M.; Rey-Bakaikoa, V.

1996-01-01

Since 1992, 18 ESRF beamlines are open to users. Although the data acquisition requirements vary a lot from one beamline to another, we are trying to implement a modular data acquisition system architecture that would fit with the maximum number of acquisition projects at ESRF. Common to all of these systems are large acquisition memories and the requirement to visualize the data during an acquisition run and to transfer them quickly after the run to safe storage. We developed a general memory API handling the acquisition memory and its organization and another library that provides calls for transferring the data over TCP/IP sockets. Interesting utility programs using these libraries are the open-quote online display close-quote program and the open-quote data transfer close-quote program. The data transfer program as well as an acquisition control program rely on our well-established open-quote device server model close-quote, which was originally designed for the machine control system and then successfully reused in beamline control systems. In the second half of this paper, the acquisition system for a 2D gas-filled detector is presented, which is one of the first concrete examples using the proposed modular data acquisition architecture. copyright 1996 American Institute of Physics

A Functional Analysis of the 1988 Bush-Dukakis Presidential Debates.

Science.gov (United States)

Benoit, William L.; Brazeal, LeAnn M.

2002-01-01

Applies the Functional Theory of Political Campaign Discourse to the 1988 presidential debates between George Bush and Michael Dukakis. Challenges the notion that this campaign was mostly negative. Concludes that despite the belief that modern campaigns are devoid of substance, these debates stressed policy about twice as much as character. (SG)

"One More Time, Let Me Justify This War": An Analysis of President Bush's Declaration of Days of Thanksgiving.

Science.gov (United States)

Jones, Kevin T.

President Bush's declaration of April 5-7, 1991 as National Days of Thanksgiving is a unique example of Presidential civil religious discourse: no other President has ever made such a declaration to thank God for a victory in war. Whether he intended to or not, President Bush engaged in a rhetorical form which allowed him to manipulate a very…

Hormonal changes in the grains of rice subjected to water stress during grain filling.

Science.gov (United States)

Yang, J; Zhang, J; Wang, Z; Zhu, Q; Wang, W

2001-09-01

Lodging-resistant rice (Oryza sativa) cultivars usually show slow grain filling when nitrogen is applied in large amounts. This study investigated the possibility that a hormonal change may mediate the effect of water deficit that enhances whole plant senescence and speeds up grain filling. Two rice cultivars showing high lodging resistance and slow grain filling were field grown and applied with either normal or high amount nitrogen (HN) at heading. Well-watered and water-stressed (WS) treatments were imposed 9 days post anthesis to maturity. Results showed that WS increased partitioning of fixed (14)CO(2) into grains, accelerated the grain filling rate but shortened the grain filling period, whereas the HN did the opposite way. Cytokinin (zeatin + zeatin riboside) and indole-3-acetic acid contents in the grains transiently increased at early filling stage and WS treatments hastened their declines at the late grain filling stage. Gibberellins (GAs; GA(1) + GA(4)) in the grains were also high at early grain filling but HN enhanced, whereas WS substantially reduced, its accumulation. Opposite to GAs, abscisic acid (ABA) in the grains was low at early grain filling but WS remarkably enhanced its accumulation. The peak values of ABA were significantly correlated with the maximum grain filling rates (r = 0.92**, P water stress during grain filling, especially a decrease in GAs and an increase in ABA, enhances the remobilization of prestored carbon to the grains and accelerates the grain filling rate.

Simulation of oscillatory processes in a beam-plasma system with a virtual cathode in gas-filled interaction space

International Nuclear Information System (INIS)

Filatov, R. A.; Hramov, A. E.

2011-01-01

Physical processes occurring in an intense electron beam with a virtual cathode in an interaction space filled with neutral gas are studied in a two-dimensional model. A mathematical model is proposed for investigating complicated self-consistent processes of neutral gas ionization by the beam electrons and the dynamics of an electron beam and heavy positive ions in the common space charge field with allowance for the two-dimensional motion of charged particles. Three characteristic dynamic regimes of the system are revealed: complete suppression of oscillations of the virtual cathode as a result of neutralizing its space charge by positive ions; the pulsed generation regime, in which the ions dynamics repeatedly suppresses and restores the virtual cathode oscillations; and the continuous generation regime with an anomalously high level of noisy oscillations.

Migration (Bush-falling) as a form of insurance for Cameroonians ...

African Journals Online (AJOL)

... a livelihood strategy and in the eyes of most Cameroonians bush-falling remains a contestable and an inevitable pathway for those seeking to lead a better lifestyle. Migration among most Cameroonian families has become a form of insurance in which families pool their resources to support the migration of kin, mindful of ...

RECORDANDO LA ESTRATEGIA DE SEGURIDAD DE GEORGE W.BUSH EN LA ERA DE DONALD TRUMP

Directory of Open Access Journals (Sweden)

Nelson Llanos Sierra

2017-12-01

Full Text Available Este trabajo analiza la estrategia de seguridad del presidente George W. Bush y su posible vinculación con el comportamiento internacional de Donald Trump, ahondando en las similitudes de ambos casos, tanto en sus objetivos como contexto internacional. Sobre la base del accionar de Trump durante los primeros meses de su mandato, este trabajo sugiere que el actual mandatario estadounidense está desarrollando, y consolidará, una estrategia de seguridad sustentada en principios, valores y objetivos comparables a aquellos defendidos por George W. Bush a inicios del presente siglo.

Green manure affects cut flower yield and quality of ‘Vegas’ rose bushes

Directory of Open Access Journals (Sweden)

Elka Fabiana Aparecida Almeida

2017-01-01

Full Text Available Rose cultivation requires many inputs for satisfactory production, making the process expensive. Nowadays, alternative practices have been used for sustainable crop production. Green manure is an agricultural practice that aims to maintain or improve soil fertility, increasing its yielding capacity. The objective of this research was to evaluate the effect of green manure with legumes on the yield and quality of ‘Vegas’ roses. Grafted rose seedlings were cultivated in open field for 30 months. Legumes used as green manure and planted intercropped with rose bushes were forage peanut (Arachis pintoi and jack bean (Canavalia ensiformis. Pigeon pea (Cajanus cajan was grown in a separate area, cut, macerated, and applied in the rows between rose bushes every 3 months. Plants of control group received no green manure, only mineral fertilizer and cattle manure, as in all other treatments. The experimental design was randomized block with four treatments (three green manure species plus the control and seven replications. The highest yield and quality of flower stems in ‘Vegas’ occurred with addition of pigeon pea on the soil surface or chemically treated (control. Forage peanut and jack bean are not suitable for intercropping with ‘Vegas’ rose bushes due to possible nutrient and water competition.

Background in xenon filled X-ray detectors

International Nuclear Information System (INIS)

Feroci, M.; Costa, E.; Dwyer, J.; Ford, E.; Kaaret, P.; Rapisarda, M.; Soffitta, P.

1995-01-01

Xenon based gas mixtures have been often used in proportional counters for X-ray astronomy in order to achieve a good efficiency in the medium/high X-ray energy range. Proportional counters flown on past missions (i.e. HEAO1 and EXOSAT) filled with Xe-based mixtures have shown a higher residual background (after that all the rejection techniques have been applied) with respect to Ar-based ones, operating in the same energy band and in the same radiation environment. We show, by means of Monte Carlo simulations, analytical computations and laboratory measurements, that such difference can be mostly understood in terms of higher internal background production and lower pulse discrimination efficiency in Xe-based gas filling, with respect to Ar-based ones. (orig.)

Fluid technologies: The Bush Pump, the LifeStraw and microworlds of humanitarian design.

Science.gov (United States)

Redfield, Peter

2016-04-01

Over the past decade, many ingenious, small-scale gadgets have appeared in response to problems of disaster and extreme poverty. Focusing on the LifeStraw, a water filtration device invented by the company Vestergaard Frandsen, I situate this wave of humanitarian design relative to Marianne de Laet and Annemarie Mol's classic article on the Zimbabwe Bush Pump. The LifeStraw shares the Bush Pump's principle of technical minimalism, as well as its ethical desire to improve the lives of communities. Unlike the pump, however, the straw defines itself through rather than against market logic, accepting the premise that one can 'do well while doing good'. Moreover, it does not share the assumed framework of de Laet and Mol's Zimbabwean socio-technical landscape: a postcolonial state happily en route to national self-definition. Nonetheless, it clearly embodies moral affect, if in the idiom of humanitarian concern rather than development. My aim is to open up three interrelated lines of inquiry for discussion. First, I consider aspects of a postcolonial condition at the micro-level of immediate needs, including assumptions about nation-state politics and markets. Second, I emphasize science and technology in the form of infrastructure, the material frontline of norms. Third, I return reflexively to love, and the complicated allure of engagement in academic work.

Bush mõistis hukka moslemite vägivaldsed meeleavaldused / Kaarel Kaas

Index Scriptorium Estoniae

Kaas, Kaarel, 1978-

2006-01-01

USA president Georg W. Bush ja välisminister Condoleezza Rice mõistavad hukka moslemite vägivaldsed meeleavaldused, kuid mitte nende ajendiks olnud Muhamedi pilavad karikatuurid ning leiavad, et Iraan ja Süüria kasutavad pilapiltide skandaali oma poliitiliste eesmärkide saavutamiseks

Electron cloud sizes in gas-filled detectors

International Nuclear Information System (INIS)

Boggende, A.J.F. den; Schrijver, C.J.

1984-01-01

Electron cloud sizes have been calculated for gas mixtures containing Ar, Xe, CO 2 , CH 4 , and N 2 for drifts through a constant electric field. The transport coefficients w and D/μ are in good agreement with experimental data of various sources for pure gases. Results of measurements, also performed in this work, for Ar+CO 2 , Ar+CH 4 , and Ar+Xe+CO 2 mixtures are in fair agreement with the calculated cloud sizes. For a large number of useful gas mixtures calculated electron cloud sizes are presented and discussed, most of which are given for the first time. A suggestion is made for an optimal gas mixture for an X-ray position sensitive proportional counter for medium and low energies. (orig.)

Towards a liquid Argon TPC without evacuation filling of a 6$m^3$ vessel with argon gas from air to ppm impurities concentration through flushing

CERN Document Server

Curioni, A; Gendotti, A; Knecht, L; Lussi, D; Marchionni, A; Natterer, G; Resnati, F; Rubbia, A; Coleman, J; Lewis, M; Mavrokoridis, K; McCormick, K; Touramanis, C

2010-01-01

In this paper we present a successful experimental test of filling a volume of 6 $m^3$ with argon gas, starting from normal ambient air and reducing the impurities content down to few parts per million (ppm) oxygen equivalent. This level of contamination was directly monitored measuring the slow component of the scintillation light of the Ar gas, which is sensitive to $all$ sources of impurities affecting directly the argon scintillation.

Chemical compositions and antimicrobial activities of Athrixia phylicoides DC. (bush tea), Monsonia burkeana (special tea) and synergistic effects of both combined herbal teas.

Science.gov (United States)

Tshivhandekano, Itani; Ntushelo, Khayalethu; Ngezimana, Wonder; Tshikalange, Thilivhali Emmanuel; Mudau, Fhatuwani Nixwell

2014-09-01

To determine the chemical compositions and evaluate the antimicrobial activity of bush tea (Athrixia phylicoides DC.), special tea (Monsonia burkeana) and synergy (combination of bush tea and special tea). Total polyphenols were determined using the methods reported by Singleton and Rossi (1965) and modified by Waterman and Mole (1994). Tannins were determined using vanillin HCL methods described by Prince et al. (1978). Total antioxidants were determined using the methods described by Awika et al. (2004). The micro dilution technique using 96-well micro-plates, as described by Eloff (1998) was used to obtain the minimum inhibition concentration (MIC) and minimum microbicidal concentration (MMC) values of the ethanol extracts against the microorganisms under study. The microbes strain used was Gram negative bacteria such as Escherichia coli, Klebsiella oxytoca, Proteus vulgaris, Serratia marcescens, Salmonella typhi, Klebsiella pneumonia; Gram positive bacteria such as Bacillus cereus, Staphylococcus aureus and a fungus Candida albicans. The results demonstrated that special tea contains significantly higher content of total polyphenols (8.34 mg/100 g) and total antioxidant (0.83 mg/100 g) as compared to bush tea [total polyphenols (6.41 mg/100g) and total antioxidant (0.63 mg/100g)] and combination of bush tea and special tea [total polyphenols (6.42 mg/100 g) and total antioxidant (0.64 mg/100 g)]. There was no significant difference in tannins between bush tea, special tea and synergy. The results of antimicrobial activity (MIC and MMC) demonstrated that the ethanol extracts of bush tea, special tea and synergy possessed antimicrobial activity against all microorganisms at different zones. The MIC of bush tea ranged from 1.56 to 12.50 mg/mL while the MMC ranged from 0.78 to 12.50 mg/mL. Special tea's MIC ranged from 0.39 to 12.50 mg/mL while the MMC ranged from 0.01 to 12.50 mg/mL. The MIC of synergy ranged from 3.13 to 12.50 mg/mL while the MMC ranged from 3

Method for filling a reactor with a catalyst

DEFF Research Database (Denmark)

2013-01-01

The invention relates to a method for filling a reactor with a catalyst for the carbonylation of carbonylated compounds in the gas phase. According to said method, a SILP catalyst is covered with a filling agent which is liquid under normal conditions and is volatile under carbonylation reaction...... conditions, and a thus-treated catalyst is introduced into the reactor and the reactor is sealed....

Ilves ja Bush - üks rantšopidajast president kutsus teise külla / Krister Paris

Index Scriptorium Estoniae

Paris, Krister, 1977-

2007-01-01

USA presidendi George W. Bushi kohtumisest president Toomas Hendrik Ilvesega. Kõne all oli viisavabadus ja NATO küberkaitsekeskuse loomine Eestisse. G.W. Bush avaldas kaastunnet Afganistanis hukkunud Eesti sõdurite omastele. Riigikogu liikmete Marko Mihkelsoni ja Sven Mikseri kommentaarid presidentide kohtumisele. Vt. samas: Esimene riigipea pärjaga. T.H. Ilves asetas pärja kommunismiohvrite mälestusmärgile, mille president G.W. Bush avas 12. juunil 2007. Vabariigi President töövisiidil Ameerika Ühendriikides 25.-26.06.2007

Gas development plan - Lithuania

International Nuclear Information System (INIS)

1993-10-01

A detailed description of the plan for the development of gas utilization in Lithuania is presented. The plan is subdivided under the headings of gas supply, gas demand, gas transmission and distribution, economy and the organization of the gas sector in the country. The first phase of the project has been undertaken by a Danish firm in cooperation with the Lithuanian firm Lietuvos Dujos. The first aim was to clarify the problems that will arise in connection with this joint venture on developing the use of gas in Lithuania, focusing on existing gas supply and market conditions, the current flow control and metering and economic constraints. The organization of the gas sector in the country as it stands today is described and possible models for its future organization are discussed in addition to a strategy of implementation. Possible development trends are outlined and maximum/minimum demand scenarios are suggested. Subjects and areas related to the gas sector in Lithuania are identified for further investigation in the next phase. It is stated that Lithuania is at present undergoing a fast transformation towards a market economy and that the transfer of foreign currency has been liberalized. Only the pipeline from Minsk to Vilnius is open at present and provides the total supply of natural gas to Lithuania and Kalingrad, controlled by the Russian gas company, Lentransgas, on the basis of a gas purchase agreement regulated on a yearly basis. Other possible supply sources are the Danish part of the North Sea and the Norwegian offshore fields. (AB)

70 Bush Meat Trading in the Oban Hills Region of South-Eastern ...

African Journals Online (AJOL)

Choice-Academy

2008-03-01

Mar 1, 2008 ... diversity of faunal species of the region can be found in ... B. The traditional inclination of rural people to bush ... (types and kinds) or species of animals involved in the .... Apes and/or. Prosimians, Reptiles; Rodents; birds, etc).

The Evolution of Missile Defense Plan from Bush to Obama. Implications for the National Security of Romania

Directory of Open Access Journals (Sweden)

Ruxandra-Laura BOSILCA

2012-06-01

Full Text Available In 2011 Romania officially became part of the Obama administration’s missile defense system in Europe which has significantly changed the strategic military relations both in Europe and worldwide. The Bush approach has been revised and progress in several sections has been achieved, both strategically and technically. For Romania, the participation in the missile defence plan, ensures more solid security guarantees, especially in an unpredictable and risk-prone international environment where the U.S. reconsiders its presence in Europe under the pressure of the economic crisis and of a relative decline in power; it has also become a more visible actor – alongside Bulgaria – which were initially excluded by the Bush missile defence plan. This paper’s purpose is to review the main evolutions of the missile defense plan from the Bush to the Obama administration and to outline its implications on the national security of Romania.

Analysis of the Causes of Cracks in a Thick-Walled Bush Made of Die-Cast Aluminum Bronze

Directory of Open Access Journals (Sweden)

Pisarek B.P.

2016-12-01

Full Text Available For the die casting conditions of aluminium bronzes assumed based on the literature data, a thick-walled bush was cast, made of complex aluminium bronze (Cu-Al-Fe-Ni-Cr. After the cast was removed from the mould, cracks were observed inside it. In order to identify the stage in the technological production process at which, potentially, the formation of stresses damaging the continuity of the microstructure created in the cast was possible (hot cracking and/or cold cracking, a computer simulation was performed. The article presents the results of the computer simulation of the process of casting the material into the gravity die as well as solidifying and cooling of the cast in the shape of a thick-walled bush. The simulation was performed with the use of the MAGMA5 program and by application of the CuAl10Ni5,5Fe4,5 alloy from the MAGMA5 program database. The results were compared with the location of the defects identified in the actual cast. As a result of the simulation of the die-casting process of this bush, potential regions were identified where significant principal stresses accumulate, which can cause local hot and cold cracking. Until now, no research has been made of die-cast aluminium bronzes with a Cr addition. Correlating the results of the computer simulation validated by the analysis of the actual cast made it possible to clearly determine the critical regions in the cast exposed to cracking and point to the causes of its occurrence. Proposals of changes in the bush die casting process were elaborated, in order to avoid hot tearing and cold cracking. The article discusses the results of preliminary tests being a prologue to the optimization of the die-casting process parameters of complex aluminium bronze thick-walled bushs.

GAS METERING PUMP

Science.gov (United States)

George, C.M.

1957-12-31

A liquid piston gas pump is described, capable of pumping minute amounts of gas in accurately measurable quantities. The pump consists of a flanged cylindrical regulating chamber and a mercury filled bellows. Sealed to the ABSTRACTS regulating chamber is a value and having a gas inlet and outlet, the inlet being connected by a helical channel to the bellows. A gravity check valve is in the gas outlet, so the gas passes through the inlet and the helical channel to the bellows where the pumping action as well as the metering is accomplished by the actuation of the mercury filled bellows. The gas then flows through the check valve and outlet to any associated apparatus.

First results from Tyrex, the new polarized-3He filling station at ILL

International Nuclear Information System (INIS)

Andersen, K.H.; Chung, R.; Guillard, V.; Humblot, H.; Jullien, D.; Lelievre-Berna, E.; Petoukhov, A.; Tasset, F.

2005-01-01

A new filling station for nuclear polarisation of 3 He gas has been constructed at the ILL, Grenoble. The 'Tyrex' machine uses metastability-exchange optical pumping for polarising the 3 He gas at about 1 mbar pressure. The gas is then compressed up to several bars via a hydraulic titanium-alloy piston compressor. The machine can provide about 1.5 bar-l/h of polarised gas--an order-of-magnitude increase over the first filling station installed at the ILL in 1996. The compressed, polarised gas is used for polarising neutron beams for condensed-matter and fundamental physics experiments. First results are presented and examples of implementations on existing neutron instruments at ILL are described

Persia lost : how the foreign policy hawks of the George W. Bush administration blocked rapprochement with Iran

OpenAIRE

Fagernes, Therese

2011-01-01

The presidency of George W. Bush was a period of controversy. The foreign policy that the administration implemented would be criticized both inside of the United States and across the world. The purpose of this thesis is to look at how the senior members of the Bush administration’s foreign policy team influenced the foreign policy process during President George Walker Bush’s first term. It will apply the interaction and bitter opposition between these individuals and the defining events th...

A gas circulation and purification system for gas-cell-based low-energy RI-beam production

Energy Technology Data Exchange (ETDEWEB)

Sonoda, T.; Wada, M.; Katayama, I.; Kojima, T. M.; Reponen, M. [RIKEN Nishina Center for Accelerator-Based Science, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Tsubota, T. [Tokyo KOATSU Co., Ltd., 1-9-8 Shibuya, Shibuyaku, Tokyo 150-0002 (Japan)

2016-06-15

A gas circulation and purification system was developed at the RIKEN Radioactive Isotope Beam Factory that can be used for gas-cell-based low-energy RI-beam production. A high-flow-rate gas cell filled with one atmosphere of buffer gas (argon or helium) is used for the deceleration and thermalization of high-energy RI-beams. The exhausted buffer gas is efficiently collected using a compact dry pump and returned to the gas cell with a recovery efficiency of >97%. The buffer gas is efficiently purified using two gas purifiers as well as collision cleaning, which eliminates impurities in the gas. An impurity level of one part per billion is achieved with this method.

Bush Offers "Blueprint" for NCLB: Partisan Split Expected as Strategies Diverge

Science.gov (United States)

Hoff, David J.

2007-01-01

This article reports how President Bush's new blueprint for the No Child Left Behind Act will create a partisan debate on educational strategies. In its plans for NCLB, the administration said it wants private and charter schools to create competition that would spur improvement in substandard schools. Democrats, however, have their own priorities…

Anisotropy in Alpedrete granite cutting (Rift, Grain and Hardway directions) and effect on bush hammered heritage ashlars

Science.gov (United States)

Freire-Lista, David Martin; Fort, Rafael

2015-04-01

Many monuments and cities that are part of humanity's heritage have been built with carved granite ashlars. This dimension stone is one of the most used due to its abundance and durability. Traditional quarrymen have used anisotropic planes to cut granite blocks in the quarry for improved cutting performance. These planes are called Rift, Grain and Hardway (R, G, H) according to the ease of cutting. The aim of this study is to determine the response of each of the three orthogonal cutting planes R, G and H to the craft styling with bush hammer, based on their decay. Alpedrete granite was selected for this research, it is a monzogranite quarried in the Sierra de Guadarrana (Spanish Central System) foothills, in the province of Madrid, Spain. It is one of the most representative of Madrid's heritage granites. Alpedrete granite is also used as building stone in other European cities. From an Alpedrete granite bush hammered ashlar, three thin sections were cut parallel to the H plane; these thin sections cut R and G bush hammered planes. Also three thin sections have been cut parallel to the R plane at a distance of 2 mm, 10 mm and 30 mm from the bush hammered surface. All thin sections have been treated with fluorescein. In each of the thin sections a micrograph mosaic was performed covering the entire area (about 10 cm2, 300 photomicrographs) and printed with 120 increases. The length and spacing of inter-, intra- and trans-crystalline microcracks were quantified and measured. Microcracks were subdivided based on affected minerals in each R, G and H planes. Through these observations it was found that Alpedrete Granite R plane (easier to cut) is determined by exfoliation microcracks orientation. That is, R plane is parallel to the exfoliations microcracks, which are intra-crystalline and straight. The cutting of stones in the R plane is due to the coalescence of straight microcracks in the plane. This plane minimizes the effort and cost of subsequent carving so it

Taxonomy Icon Data: Japanese Bush Warbler [Taxonomy Icon

Lifescience Database Archive (English)

Full Text Available Japanese Bush Warbler Cettia diphone Chordata/Vertebrata/Aves Cettia_diphone_L.png Cettia_diphone..._NL.png Cettia_diphone_S.png Cettia_diphone_NS.png http://biosciencedbc.jp/taxonomy_icon/icon.cgi?i=Cettia+diphone...&t=L http://biosciencedbc.jp/taxonomy_icon/icon.cgi?i=Cettia+diphone&t=NL http://bioscie...ncedbc.jp/taxonomy_icon/icon.cgi?i=Cettia+diphone&t=S http://biosciencedbc.jp/tax...onomy_icon/icon.cgi?i=Cettia+diphone&t=NS http://togodb.biosciencedbc.jp/togodb/view/taxonomy_icon_comment_en?species_id=26 ...

Market Assessment and Demonstration of Lignite FBC Ash Flowable Fill Applications

International Nuclear Information System (INIS)

Alan E. Bland

2003-01-01

Montana-Dakota Utilities (MDU) and Western Research Institute (WRI) have been developing flowable fill materials formulated using ash from the Montana-Dakota Utilities R. M. Heskett Station in Mandan, North Dakota. MDU and WRI have partnered with the U.S. Department of Energy (DOE) and the North Dakota Industrial Commission (NDIC) to further the development of these materials for lignite-fired fluidized-bed combustion (FBC) facilities. The MDU controlled density fill (CDF) appears to be a viable engineering material and environmentally safe. WRI is pursuing the commercialization of the technology under the trademark Ready-Fill(trademark). The project objectives were to: (1) assess the market in the Bismarck-Mandan area; (2) evaluate the geotechnical properties and environmental compatibility; and (3) construct and monitor demonstrations of the various grades of flowable fill products in full-scale demonstrations. The scope of initial phase of work entailed the following: Task I--Assess Market for MDU Flowable Fill Products; Task II--Assess Geotechnical and Environmental Properties of MDU Flowable Fill Products; and Task III--Demonstrate and Monitor MDU Flowable Fill Products in Field-Scale Demonstrations. The results of these testing and demonstration activities proved the following: (1) The market assessment indicated that a market exists in the Bismarck-Mandan area for structural construction applications, such as sub-bases for residential and commercial businesses, and excavatable fill applications, such as gas line and utility trench filling. (2) The cost of the MDU flowable fill product must be lower than the current $35-$45/cubic yard price if it is to become a common construction material. Formulations using MDU ash and lower-cost sand alternatives offer that opportunity. An estimated market of 10,000 cubic yards of MDU flowable fill products could be realized if prices could be made competitive. (3) The geotechnical properties of the MDU ash-based flowable

Market Assessment and Demonstration of Lignite FBC Ash Flowable Fill Applications

Energy Technology Data Exchange (ETDEWEB)

Alan E. Bland

2003-09-30

Montana-Dakota Utilities (MDU) and Western Research Institute (WRI) have been developing flowable fill materials formulated using ash from the Montana-Dakota Utilities R. M. Heskett Station in Mandan, North Dakota. MDU and WRI have partnered with the U.S. Department of Energy (DOE) and the North Dakota Industrial Commission (NDIC) to further the development of these materials for lignite-fired fluidized-bed combustion (FBC) facilities. The MDU controlled density fill (CDF) appears to be a viable engineering material and environmentally safe. WRI is pursuing the commercialization of the technology under the trademark Ready-Fill{trademark}. The project objectives were to: (1) assess the market in the Bismarck-Mandan area; (2) evaluate the geotechnical properties and environmental compatibility; and (3) construct and monitor demonstrations of the various grades of flowable fill products in full-scale demonstrations. The scope of initial phase of work entailed the following: Task I--Assess Market for MDU Flowable Fill Products; Task II--Assess Geotechnical and Environmental Properties of MDU Flowable Fill Products; and Task III--Demonstrate and Monitor MDU Flowable Fill Products in Field-Scale Demonstrations. The results of these testing and demonstration activities proved the following: (1) The market assessment indicated that a market exists in the Bismarck-Mandan area for structural construction applications, such as sub-bases for residential and commercial businesses, and excavatable fill applications, such as gas line and utility trench filling. (2) The cost of the MDU flowable fill product must be lower than the current $35-$45/cubic yard price if it is to become a common construction material. Formulations using MDU ash and lower-cost sand alternatives offer that opportunity. An estimated market of 10,000 cubic yards of MDU flowable fill products could be realized if prices could be made competitive. (3) The geotechnical properties of the MDU ash-based flowable

Hydrogen Filling Station

Energy Technology Data Exchange (ETDEWEB)

Boehm, Robert F; Sabacky, Bruce; Anderson II, Everett B; Haberman, David; Al-Hassin, Mowafak; He, Xiaoming; Morriseau, Brian

2010-02-24

Hydrogen is an environmentally attractive transportation fuel that has the potential to displace fossil fuels. The Freedom CAR and Freedom FUEL initiatives emphasize the importance of hydrogen as a future transportation fuel. Presently, Las Vegas has one hydrogen fueling station powered by natural gas. However, the use of traditional sources of energy to produce hydrogen does not maximize the benefit. The hydrogen fueling station developed under this grant used electrolysis units and solar energy to produce hydrogen fuel. Water and electricity are furnished to the unit and the output is hydrogen and oxygen. Three vehicles were converted to utilize the hydrogen produced at the station. The vehicles were all equipped with different types of technologies. The vehicles were used in the day-to-day operation of the Las Vegas Valley Water District and monitoring was performed on efficiency, reliability and maintenance requirements. The research and demonstration utilized for the reconfiguration of these vehicles could lead to new technologies in vehicle development that could make hydrogen-fueled vehicles more cost effective, economical, efficient and more widely used. In order to advance the development of a hydrogen future in Southern Nevada, project partners recognized a need to bring various entities involved in hydrogen development and deployment together as a means of sharing knowledge and eliminating duplication of efforts. A road-mapping session was held in Las Vegas in June 2006. The Nevada State Energy Office, representatives from DOE, DOE contractors and LANL, NETL, NREL were present. Leadership from the National hydrogen Association Board of Directors also attended. As a result of this session, a roadmap for hydrogen development was created. This roadmap has the ability to become a tool for use by other road-mapping efforts in the hydrogen community. It could also become a standard template for other states or even countries to approach planning for a hydrogen

Indigenous knowledge system of bush tea from the local people in ...

African Journals Online (AJOL)

The article provides a report on a survey conducted in selected villages of Thohoyandou and Nzhelele in Venda, Limpopo Province of South Africa by means of personal interviews. The aim of the survey was to gather indigenous knowledge and to validate the uses of bush tea as claimed by the local people. The interviews ...

Bush jättis püüne Putinile / Toomas Alatalu

Index Scriptorium Estoniae

Alatalu, Toomas, 1942-

2007-01-01

Politoloog tõdeb, et USA president George W. Bush lahkus enne lõppu Aasia-Vaikse ookeani majanduskoostöö organisatsiooni (APEC) tippkohtumiselt ja külastas Iraaki, et kinnitada maailmale Iraagi sõja vajalikkust. Vene president Vladimir Putin tugevdas Vene positsioone maailmas, andes krediiti Indoneesiale Vene laevade ja lennukite ostuks ning sõlmides uraaniostulepingu Austraaliaga

Sodium fill of FFTF

International Nuclear Information System (INIS)

Waldo, J.B.; Greenwell, R.K.; Keasling, T.A.; Collins, J.R.; Klos, D.B.

1980-02-01

With construction of the Fast Flux Test Facility (FFTF) completed, the first major objective in the startup program was to fill the sodium systems. A sodium fill sequence was developed to match construction completion, and as systems became available, they were inerted, preheated, and filled with sodium. The secondary sodium systems were filled first while dry refueling system testing was in progress in the reactor vessel. The reactor vessel and the primary loops were filled last. This paper describes the methods used and some of the key results achieved for this major FFTF objective

The effect of gibberellins on sprouting of cuttings and quality of bush ...

African Journals Online (AJOL)

Total polyphenols were determined using Folin Ciocalteau method, total tannins were determined using the Vanillin HCL method and total antioxidants were determined using the trolox equivalent antioxidant capacity (TEAC) assay. The results of this study showed favourable response of bush tea growth to increased rates ...

Obamas opgør med Bush låser ham i dronekrig

DEFF Research Database (Denmark)

Ulrich, Philip Christian

2013-01-01

En helt central del af Obamas valgkamp i 2008 var et opgør med dele af Bush administrationens krig mod terror. Obama er dog blevet fanget i en kontroversiel dronepolitik på grund af hans manglende succes med de indenrigspolitiske aspekter af opgøret...

Non-destructive measurement of Xe filling pressure in mercury-free metal halide lamp

International Nuclear Information System (INIS)

Motomura, Hideki; Enoki, Kyosuke; Jinno, Masafumi

2010-01-01

Mercury-free metal halide lamps (MHLs) for automotive purposes have been developing in the market. When mercury is not used, the electric and emission characteristics of the lamp strongly depend on the xenon filling pressure. Therefore a non-destructive gas pressure estimation technique is required to obtain stable performance of the lamps as commercial products. The authors have developed an estimation method by which the gas pressure is estimated from the current peak value at the initial stage of ignition under pulsed operation. It is shown that accuracy of the order of ±(0.1-0.3) atm is obtained using an empirical formula.

Investigating Liquid Leak from Pre-Filled Syringes upon Needle Shield Removal: Effect of Air Bubble Pressure.

Science.gov (United States)

Chan, Edwin; Maa, Yuh-Fun; Overcashier, David; Hsu, Chung C

2011-01-01

This study is to investigate the effect of headspace air pressure in pre-filled syringes on liquid leak (dripping) from the syringe needle upon needle shield removal. Drip tests to measure drip quantity were performed on syringes manually filled with 0.5 or 1.0 mL of various aqueous solutions. Parameters assessed included temperature (filling and test), bulk storage conditions (tank pressure and the type of the pressurized gas), solution composition (pure water, 0.9% sodium chloride, and a monoclonal antibody formulation), and testing procedures. A headspace pressure analyzer was used to verify the drip test method. Results suggested that leakage is indeed caused by headspace pressure increase, and the temperature effect (ideal gas expansion) is a major, but not the only, factor. The dissolved gases in the liquid bulk prior to or during filling may contribute to leakage, as these gases could be released into the headspace due to solubility changes (in response to test temperature and pressure conditions) and cause pressure increase. Needle shield removal procedures were found to cause dripping, but liquid composition played little role. Overall, paying attention to the processing history (pressure and temperature) of the liquid bulk is the key to minimize leakage. The headspace pressure could be reduced by decreasing liquid bulk storage pressure, filling at a higher temperature, or employing lower solubility gas (e.g., helium) for bulk transfer and storage. Leakage could also be mitigated by simply holding the syringe needle pointing upward during needle shield removal. Substantial advances in pre-filled syringe technology development, particularly in syringe filling accuracy, have been made. However, there are factors, as subtle as how the needle shield (or tip cap) is removed, that may affect dosing accuracy. We recently found that upon removal of the tip cap from a syringe held vertically with needle pointed downwards, a small amount of solution, up to 3-4% of

Developing the east coast gas industry

International Nuclear Information System (INIS)

Stedman, C.

1998-01-01

Development of a natural gas industry on Canada's east coast was discussed. The various stages of near-term and long-term development were outlined. Opportunities were identified in the areas of Grand Banks gas utilization, third party gas and natural gas liquids transportation and processing, cogeneration, petrochemicals and in energy marketing and services. As an example of this industry development, a corporate review of Novagas Canada Ltd., was presented. The company was formed in January 1994 and is wholly owned by Nova Gas International. Novagas Canada has ultimate resources of 62.9 Tcf of natural gas of which 48.9 Tcf remains to be discovered. The company focuses on non-regulated mid-stream operations of the natural gas/natural gas liquid value chain. Some 800 million dollars have been invested so far in gas processing, liquids and olefins businesses in Nova Scotia and the Grand Banks/Labrador area. The pending Nova/TCPL merger will combine Novagas Canada's and TransCanada Gas Services' midstream assets. The general conclusion was that the resource base is large enough to support development throughout the gas and natural gas liquids value chain, and that a critical mass is required to support development of the necessary gas infrastructure. A sizeable challenge remains in encouraging gas utilization, and in encouraging competition, open access and unbundling of energy services. 2 tabs., 2 figs

Bush lubas al-Zarqawi järglase kinni püüda / Aadu Hiietamm

Index Scriptorium Estoniae

Hiietamm, Aadu, 1954-

2006-01-01

USA president George W. Bush teatas, et tapetud terrorivõrgustiku al Qaeda Iraagi haru liidri Abu Musab al-Zarqawi järglaseks nimetatud Abu Hamsa al-Muhajir on kuulutatud enim tagaotsitavaks terroristiks

LHCB RICH gas system proposal

CERN Document Server

Bosteels, Michel; Haider, S

2001-01-01

Both LHCb RICH will be operated with fluorocarbon as gas radiator. RICH 1 will be filled with 4m^3 of C4F10 and RICH 2 with 100m^3 of CF4. The gas systems will run as a closed loop circulation and a gas recovery system within the closed loop is planned for RICH 1, where the recovery of the CF4 will only be realised during filling and emptying of the detector. Inline gas purification is foreseen for the gas systems in order to limit water and oxygen impurities.

Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores

International Nuclear Information System (INIS)

Wang Bo; Matsumaru, Koji; Yang Jianfeng; Fu Zhengyi; Ishizaki, Kozo

2012-01-01

High strength borosilicate foams were fabricated by melting glass powder under high-pressure argon gas and subsequent heat treatment of the glass bulk at atmospheric pressure. In the first step, borosilicate glass powder was melted at 1100 °C for 1 h by capsule-free hot isostatic pressing (HIPing) under a high gas pressure of 10–70 MPa. Pressurized Ar-filled spherical pores were introduced into the glass, and argon atoms were dissolved in the glass network structure. The expansion of argon-filled pores and the release of the dissolved Ar gas resulted in the formation of pressurized Ar-filled closed pores by isothermal heat treatment at 800 °C for 10 min. A high porosity of up to 80% with a bimodal distribution of micro-size cells was obtained for the resultant cellular borosilicate glass. By increasing the total gas pressure from 10 to 70 MPa, the compressive strength and the Young’s modulus were increased considerably from 15 to 52 MPa and from 4.1 to 12.6 GPa, respectively, which can be substantially attributed to the high collapse stress from the high enclosed gas pressure. The cellular glass with a high porosity showed a large failure strain under uniaxial compression.

Natural oscillations of a gas bubble in a liquid-filled cavity located in a viscoelastic medium

Science.gov (United States)

Doinikov, Alexander A.; Marmottant, Philippe

2018-04-01

The present study is motivated by cavitation phenomena that occur in the stems of trees. The internal pressure in tree conduits can drop down to significant negative values. This drop gives rise to cavitation bubbles, which undergo high-frequency eigenmodes. The aim of the present study is to determine the parameters of the bubble natural oscillations. To this end, a theory is developed that describes the pulsation of a spherical bubble located at the center of a spherical cavity surrounded by an infinite solid medium. It is assumed that the medium inside the bubble is a gas-vapor mixture, the cavity is filled with a compressible viscous liquid, and the medium surrounding the cavity behaves as a viscoelastic solid. The theoretical solution takes into account the outgoing acoustic wave produced by the bubble pulsation, the incoming wave caused by reflection from the liquid-solid boundary, and the outgoing wave propagating in the solid. A dispersion equation for the calculation of complex wavenumbers of the bubble eigenmodes is derived. Approximate analytical solutions to the dispersion equation are found. Numerical simulations are performed to reveal the effect of different physical parameters on the resonance frequency and the attenuation coefficient of the bubble oscillations.

A gaseous scintillation counter filled with He3 for neutron spectrometry

International Nuclear Information System (INIS)

Baldin, S.A.; Matveev, V.V.

1962-01-01

The paper describes a gas plant and gaseous scintillation counter, and gives the results of experiments on the recording and spectrometry of neutron beams using a gaseous scintillation counter filled with a mixture of 10% xenene and 90% helium-3 at an overall pressure of 20 ata. Data are given on the design of the gas plant, which makes it possible to operate the counter continuously over long periods of time, as well as providing the required gas mixtures at overall pressures of up to 60 atm and ensuring constant freedom of the gas from contamination. In addition, the paper presents the results of research on the counter's energy resolution and linearity at different energy levels and indicates its efficiency in gamma fields of intensity up to 3 r/h; the possibility of extending the working energy-range of gaseous scintillation counters filled with helium-3 is also considered. (author) [fr

Beam cooling using a gas-filled RFQ ion guide

CERN Document Server

Henry, S; De Saint-Simon, M; Jacotin, M; Képinski, J F; Lunney, M D

1999-01-01

A radiofrequency quadrupole mass filter is being developed for use as a high-transmission beam cooler by operating it in buffer gas at high pressure. Such a device will increase the sensitivity of on-line experiments that make use of weakly produced radioactive ion beams. We present simulations and some preliminary measurements for a device designed to cool the beam for the MISTRAL RF mass spectrometer on- line at ISOLDE. The work is carried out partly within the frame of the European Community research network: EXOTRAPS. (9 refs).

President Bush : langenud nõuavad, et me jätkame võitlust! / Tõnis Erilaid

Index Scriptorium Estoniae

Erilaid, Tõnis, 1943-

2005-01-01

Salt Lake Citys USA sõjaveteranidele peetud kõnes ütles USA president George W. Bush, et tuleb jõuda eesmärgile, mille eest USA sõdurid oma elu andsid. Samas toimus sõjavastaste demonstratsioon

The Bush Doctrine: The Foreign Policy of Republican Empire

Science.gov (United States)

2009-01-01

Michael W. Doyle, ‘‘Kant, Liberal Legacies, and Foreign Affairs,’’ Philosophy and Public Affairs, Vol. 12, No. 3, Summer, 1983, pp. 205–235 and ‘‘Kant...Liberal Legacies, and Foreign Affairs, Part 2,’’ Philosophy and Public Affairs, Autumn, 1983, pp. 323–353, as well as Doyle, Ways of War and Peace (New...so-called libertarians and OWENS 41 George Bush, Graduation Speech at the US Air Force Academy, June 2, 2004, http:// www.whitehouse.gov/news/releases

Examining the effects of fill gas pressure on the distribution of copper atoms in a hollow cathode lamp

International Nuclear Information System (INIS)

Oliver, D.R.; Finlayson, T.R.

1996-01-01

A modified Copper Hollow Cathode lamp has been used to examine the effects of fill gas pressure on the distribution of sputtered Copper atoms in the body of the lamp. The lamp was modified by placing a quartz disc above the cathode, perpendicular to both the cathode bore and the cathode-anode axis. While the lamp is operating, some of the Copper that has been sputtered out of the cathode bore is deposited on the disc. Modified lamps have been operated at a variety of pressures, and the resulting deposition profiles recorded using an optical microscope. A summary of variations between different pressures are presented

Energy transition: gas asserts its assets

International Nuclear Information System (INIS)

Passebon, Philippe; Lesquel, Emmanuelle; Leroux, Hugo

2016-01-01

Even though it is a fossil energy, gas has a role to play in energy transition as it emits less CO 2 than oil or coal. In this context, it can be used to fill the gaps due to intermittency of some renewable energies, and moreover can also be obtained from organic matter, and then becomes also a renewable source. A set of articles addresses and illustrates these different issues: the development of technologies to exploit methane, the role of substitute for gas, the assets of methane, of natural gas and of biogas, the transformation of electricity into gas in order to easily store energy (notably in the network gas according to the power-to-gas principle), the development of biomass-based methane, the replacement of oil by LNG (liquefied natural gas) in industry and transports (road and sea transport notably)

Heat and mass transfer across gas-filled enclosed spaces between a hot liquid surface and a cooled roof

Energy Technology Data Exchange (ETDEWEB)

Ralph, J C; Bennett, A W [Atomic Energy Research Establishment, Harwell, Oxfordshire (United Kingdom)

1977-01-01

A detailed knowledge is required of the amounts of sodium vapour which may be transported from the hot surface of a fast reactor coolant pool through the cover gas to cooler regions of the structure. Evaporation from the unbounded liquid surfaces of lakes and seas has been studied extensively but the heat and mass transfer mechanisms in gas-vapour mixtures which occur in enclosed spaces have received less attention. Recent work at Harwell has provided a theoretical model from which the heat and mass transfer in idealised plane cavities can be calculated. An experimental study is reported in this paper which seeks to verify the theoretical prediction. Heat and mass transfer measurements have been made on a system in which a heated water pool transfers heat and mass across a gas-filled space to a cooled horizontal cover plate. Several cover gases were used in the experiments and the results show that, provided the partial density of the vapour is low compared with that of the gas, the heat transfer mechanism is that of combined convection and radiation. The enhancement in heat transfer due to the presence of the vapour is broadly consistent with assumption of a direct analogy between heat and mass transfer neglecting condensation in the interspace. The mass transfer measurements, in which water condensing on the cooled roof was measured directly, showed for low roof temperatures an imbalance between the mass and heat transfer. This observation is consistent with the theoretical predictions that heat transfer in the convecting system should be independent of the amount of condensation and 'rain-back' within the cavity. The results of tests with helium showed that convection was entirely suppressed by the presence of the water vapour. This confirms the behaviour predicted for gas-vapour mixtures in which the vapour density is of the same order as the gas density. (author)

Les relations économiques sino-américaines pendant les années Bush (2001-2008 : vers une stratégie de « dissuasion économique » ? US-China Relations during the Bush Presidency, 2001-2008: Towards a Strategy of “Economic Deterrence”?

Directory of Open Access Journals (Sweden)

Juliette Bourdin

2010-03-01

Full Text Available Au cours de la présidence de George W. Bush, les relations économiques sino-américaines se sont caractérisées par une interdépendance croissante, tant au niveau des enjeux commerciaux que des enjeux financiers. Si les questions du déficit de la balance commerciale et des droits de la propriété intellectuelle faisaient déjà débat pendant la présidence de Bill Clinton, en revanche les questions financières de la valeur du renminbi et des réserves chinoises de bons du Trésor sont apparues pendant les années Bush. Alors que l’administration Bush prônait initialement une stratégie de « congagement » (endiguement/ engagement et définissait la Chine comme un « concurrent stratégique », non seulement le 11-Septembre a modifié les priorités immédiates de Washington mais, du fait de l’interdépendance économique sino-américaine, il semble que la « dissuasion économique » soit désormais la seule stratégie réaliste dans les relations entre Washington et Pékin.During the presidency of George W. Bush, the main characteristic of US-China economic relations was an increasing interdependency in the field of trade as well as over financial issues. If trade imbalance and intellectual property rights were already matters for debate during the presidency of Bill Clinton, the issues of the value of the renminbi and of Chinese holdings of US Treasury bonds emerged during the Bush years. While the Bush administration had initially advocated a strategy of “congagement” (containment/ engagement and had defined China as a “strategic competitor”, not only did 9/11 change Washington’s immediate priorities, but, with the US-China economic interdependency, the only realistic strategy between Washington and Beijing seemed to consist in “economic deterrence.”

L’environnement naturel et le changement climatique pendant les années Bush : la pertinence d’une différenciation des échelles territoriales Climate Change and the Natural Environment in the Bush Years: The Relevance of Territorial Scale Differentiation

Directory of Open Access Journals (Sweden)

Cynthia Ghorra-Gobin

2010-03-01

Full Text Available L’attitude de l’administration fédérale au cours des huit années de l’administration Bush contraste avec celle du contexte des années 1960-1970 pour ce qui concerne la prise en compte de l’environnement naturel dans les décisions économiques. Toutefois, cet engagement limité du président Bush sur la question du changement climatique dans les débats internationaux n’a pas pour autant réduit les capacités de mobilisation des États et des villes sur ce thème.On the issue of whether climate change should be taken into account in economic decisions, the federal administration’s attitude during the Bush Presidency sharply contrasted with the attitudes of earlier administrations, particularly in the 1960’s and 1970’s. The limited concern for climate change which the federal government exhibited in the international arena did not reduce, however, the mobilization of states and local communities on this issue.

Electromagnetically induced transparency and ultraslow optical solitons in a coherent atomic gas filled in a slot waveguide.

Science.gov (United States)

Xu, Jin; Huang, Guoxiang

2013-02-25

We investigate the electromagnetically induced transparency (EIT) and nonlinear pulse propagation in a Λ-type three-level atomic gas filled in a slot waveguide, in which electric field is strongly confined inside the slot of the waveguide due to the discontinuity of dielectric constant. We find that EIT effect can be greatly enhanced due to the reduction of optical-field mode volume contributed by waveguide geometry. Comparing with the atomic gases in free space, the EIT transparency window in the slot waveguide system can be much wider and deeper, and the Kerr nonlinearity of probe laser field can be much stronger. We also prove that using slot waveguide ultraslow optical solitons can be produced efficiently with extremely low generation power.

I'm Not Sure What George Bush Has to Do with Hitler

Science.gov (United States)

Pogorelskin, Alexis

2005-01-01

Alexis Pogorelskin, an associate professor at the University of Minnesota Duluth and chair of the History Department, recounts her experience in 2004 after making a controversial comment in her History of the Holocaust and 20th Century Russia class. Her comment was in reference to President Bush making no mention in the 2000 campaign about the…

Gas-Induced Rectified Motion of a Solid Object in a Liquid-Filled Housing during Vibration: Analysis and Experiments

Science.gov (United States)

Torczynski, J. R.; O'Hern, T. J.; Clausen, J. R.; Koehler, T. P.

2017-11-01

The motion of a solid object (a piston) that fits closely within a housing filled with viscous liquid is studied. If a small amount of gas is introduced and the system is subjected to axial vibration, then the piston exhibits rectified motion when the drag on the piston depends on its position within the housing. An idealized system, in which the piston is suspended freely between two springs and the gas is replaced with two compressible bellows, is analyzed theoretically and studied experimentally. For a given vibration amplitude or frequency, the piston either remains near its original position (``up'') or moves to a different position (``down''), where its spring suspension is compressed. Analytical and experimental regime maps of the amplitudes and frequencies at which the piston is up or down are in good agreement. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Gas replacement system for fuel cell. Nenryo denchi no gas chikan hoshiki

Energy Technology Data Exchange (ETDEWEB)

Sugiyama, T

1990-02-14

When stopping the operation of a fuel cell, the gas in the reaction gas system is purged using such an inert gas as nitrogen for inactivation. A gas source such as inert gas bomb must be prepared beforehand for the purpose. This invention relates to a method of production of inert gas from the air collected from atmosphere to use it as the purge gas. The air collected from the atmosphere is passed through an oxygen remover filled with oxidation catalyst to remove oxygen, and dehumidified by a dehumidifier filled with drying agent, the obtained inert drying gas with nitrogen as the main constituent being used as the purge gas. Copper system catalyst supported by silica is used as the oxidation catalyst, and silica gel as the drying agent. After the operation of the fuel cell is re-started, a part of the high temperature fuel gas extracted from the reaction gas system is introduced to the oxygen remover for the reduction of oxidation catalyst and for heat regeneration of dehumidifying agent by the contained hydrogen. 1 fig.

Landfill gas: development guidelines

International Nuclear Information System (INIS)

1996-11-01

A Guide produced as part of the UK DTI's New and Renewable Energy Programme provides information which forms a framework enabling landfill gas to be exploited fully as a renewable energy resource. The eight chapters cover the resource base of landfill gas in the UK in the wider context, the technology for energy recovery from landfill gas, the utilisation options for landfill gas, the various project development arrangements and their implementation, the assessment of a site's landfill gas resource, the factors which influence the project economies, financing aspects and the management of project liabilities and finally the national waste disposal policy and required consents followed by the overall process for project mobilisation. (UK)

MARIOLA: A model for calculating the response of mediterranean bush ecosystem to climatic variations

Energy Technology Data Exchange (ETDEWEB)

Uso-Domenech, J.L.; Ramo, M.P. [Department of Mathematics, Campus de Penyeta Roja, University Jaume I, Castellon (Spain); Villacampa-Esteve, Y. [Department of Analysis and Applied Mathematics, University of Alicante (Spain); Stuebing-Martinez, G. [Department of Botany, University of Valencia (Spain); Karjalainen, T. [Faculty of Forestry, University of Joensuu (Finland)

1995-07-01

The paper summarizes the bush ecosystem model developed for assessing the effects of climatic change on the behaviour of mediterranean bushes assuming that temperature, humidity and rain-fall are the basic dimensions of the niche occupied by shrub species. In this context, changes in the monthly weather pattern serve only to outline the growth conditions due to the nonlinearity of response of shrubs to climatic factors. The plant-soil-atmosphere system is described by means of ordinary non-linear differential equations for the state variables: green biomass, woody biomass, the residues of green and woody biomasses, faecal detritus of mammals on the soil, and the total organic matter of the soil. The behaviour of the flow variables is described by means of equations obtained from non-linear multiple regressions from the state variables and the input variables. The model has been applied with success to the behaviour of Cistus albidus in two zones of the Province of Alicante (Spain). The data base for the parametrical locations (zone 1) and validation (zone 2) is based upon measurements taken weekly over a 2-year period. The model is used to simulate the response of this shrub to a decreasing tendency in precipitation combined with a simultaneous rise in temperature. A period of 10 years is simulated and it is observed that plants with woody biomass smaller than 85 g die between the first and the third month and other plants` biomass decreases during this period, and strongly thereafter

Calculation of piping loads due to filling procedures

International Nuclear Information System (INIS)

Swidersky, Harald; Thiele, Thomas

2012-01-01

Filling procedures in piping systems are usually not load cases that are studied by fluid dynamic and structure dynamic analyses with respect to the integrity of pipes and supports. Although, their frequency is higher than that of postulated accidental transients, therefore they have to be considered for fatigue analyses. The piping and support loads due to filling procedures are caused by the density differences if the transported fluids, for instance in flows with the transport of gas bubbles. The impact duration of the momentum forces is defined by the flow velocity and the length of discontinuities in the piping segments. Filling procedures end very often with a shock pressure, caused by the impact and decelerating of the fluid front at smaller cross sections. The suitability of the thermally hydraulics program RELAP/MOD3.3 for the calculation of realistic loads from filling procedures was studied, the results compared with experimental data. It is shown that dependent on the discretization level the loads are partial significantly underestimated.

Development of Modified Incompressible Ideal Gas Model for Natural Draft Cooling Tower Flow Simulation

Science.gov (United States)

Hyhlík, Tomáš

2018-06-01

The article deals with the development of incompressible ideal gas like model, which can be used as a part of mathematical model describing natural draft wet-cooling tower flow, heat and mass transfer. It is shown, based on the results of a complex mathematical model of natural draft wet-cooling tower flow, that behaviour of pressure, temperature and density is very similar to the case of hydrostatics of moist air, where heat and mass transfer in the fill zone must be taken into account. The behaviour inside the cooling tower is documented using density, pressure and temperature distributions. The proposed equation for the density is based on the same idea like the incompressible ideal gas model, which is only dependent on temperature, specific humidity and in this case on elevation. It is shown that normalized density difference of the density based on proposed model and density based on the nonsimplified model is in the order of 10-4. The classical incompressible ideal gas model, Boussinesq model and generalised Boussinesq model are also tested. These models show deviation in percentages.

Development of Modified Incompressible Ideal Gas Model for Natural Draft Cooling Tower Flow Simulation

Directory of Open Access Journals (Sweden)

Hyhlík Tomáš

2018-01-01

Full Text Available The article deals with the development of incompressible ideal gas like model, which can be used as a part of mathematical model describing natural draft wet-cooling tower flow, heat and mass transfer. It is shown, based on the results of a complex mathematical model of natural draft wet-cooling tower flow, that behaviour of pressure, temperature and density is very similar to the case of hydrostatics of moist air, where heat and mass transfer in the fill zone must be taken into account. The behaviour inside the cooling tower is documented using density, pressure and temperature distributions. The proposed equation for the density is based on the same idea like the incompressible ideal gas model, which is only dependent on temperature, specific humidity and in this case on elevation. It is shown that normalized density difference of the density based on proposed model and density based on the nonsimplified model is in the order of 10-4. The classical incompressible ideal gas model, Boussinesq model and generalised Boussinesq model are also tested. These models show deviation in percentages.

Sweet resin bush on the Santa Rita Experimental Range: An eradication effort

Science.gov (United States)

Larry D. Howery; Bruce D. Munda; Dan G. Robinett; Harry H. Buck

2003-01-01

Sweet resin bush (Euryops subcarnosus DC ssp. vulgaris B. Nord; or, Euryops multifidis (L. f.) DC.), a South African shrub introduced to Arizona in the 1930s, was discovered on the Santa Rita Experimental Range (SRER) in 1998. Due to the threat of spread of this invasive plant and its potential to cause adverse environmental and economic effects, and because it posed a...

The USA policy evolution in the Caspian sea from Clinton to Bush

International Nuclear Information System (INIS)

Jafalian, A.

2003-01-01

The author analyzes the USA policy in the Caspian Sea area and its evolution with the election of Bush. If no major orientation appear, some sensible evolutions are presented concerning the pipelines management in this area. The author presents then, the new definition of the economical variables and the reinforcement of the security dimension of the USA policy. (A.L.B.)

Reduction of eddy current losses around bushing holes on the top-plate of a high efficient transformer

Directory of Open Access Journals (Sweden)

Mehmet Aytaç ÇINAR

2017-08-01

Full Text Available Low voltage winding leads cause local eddy current losses in top-plate of the transformer tank. In this paper, this loss component which also causes local hot spots is investigated. Top-plate design is modified using stainless steel non-magnetic material, around the low voltage bushing holes. Manufacturing issues and cost as well as power losses are considered as main criteria during modification study. Magnetic flux distributions and eddy current losses are analysed and compared for different designs. Comparisons are based on 3D finite element simulations and experimental studies. Obtained results show that, insertion of single I-shaped stainless steel plate reduces eddy current losses around low voltage bushing holes to nearly zero.

Recent developments in inorganically filled carbon nanotubes: successes and challenges

Directory of Open Access Journals (Sweden)

Ujjal K Gautam, Pedro M F J Costa, Yoshio Bando, Xiaosheng Fang, Liang Li, Masataka Imura and Dmitri Golberg

2010-01-01

Full Text Available Carbon nanotubes (CNTs are a unique class of nanomaterials that can be imagined as rolled graphene sheets. The inner hollow of a CNT provides an extremely small, one-dimensional space for storage of materials. In the last decade, enormous effort has been spent to produce filled CNTs that combine the properties of both the host CNT and the guest filling material. CNTs filled with various inorganic materials such as metals, alloys, semiconductors and insulators have been obtained using different synthesis approaches including capillary filling and chemical vapor deposition. Recently, several potential applications have emerged for these materials, such as the measurement of temperature at the nanoscale, nano-spot welding, and the storage and delivery of extremely small quantities of materials. A clear distinction between this class of materials and other nanostructures is the existence of an enormous interfacial area between the CNT and the filling matter. Theoretical investigations have shown that the lattice mismatch and strong exchange interaction of CNTs with the guest material across the interface should result in reordering of the guest crystal structure and passivation of the surface dangling bonds and thus yielding new and interesting physical properties. Despite preliminary successes, there remain many challenges in realizing applications of CNTs filled with inorganic materials, such as a comprehensive understanding of their growth and physical properties and control of their structural parameters. In this article, we overview research on filled CNT nanomaterials with special emphasis on recent progress and key achievements. We also discuss the future scope and the key challenges emerging out of a decade of intensive research on these fascinating materials.

Superheroes and the Bush doctrine: narrative and politics in post­-9/11 discourse

NARCIS (Netherlands)

Hassler-Forest, D.A.

2011-01-01

Dan Hassler-Forest onderzocht de manier waarop de Amerikaanse politiek samenvloeit met populaire cultuur. De centrale figuur hierin is de superheld, die fungeert als een symbolische belichaming voor de conflicterende fantasieën die de jaren van het presidentschap van George W. Bush in de Verenigde

A Gas Target with a Tritium Gas Handling System

Energy Technology Data Exchange (ETDEWEB)

Holmqvist, B; Wiedling, T

1963-12-15

A detailed description is given of a simple tritium gas target and its tritium gas filling system, and how to put it into operation. By using the T (p,n) He reaction the gas target has been employed for production of monoenergetic fast neutrons of well defined energy and high intensity. The target has been operated successfully for a long time.

Spectral Decomposition and Other Seismic Attributes for Gas Hydrate Prospecting

Energy Technology Data Exchange (ETDEWEB)

McConnell, Dan

2018-02-25

Studying the sediments at the base of gas hydrate stability is ideal for determining the seismic response to gas hydrate saturation. First, assuming gas migration to the shallow section, this area is more likely to have concentrated gas hydrate because it encompasses the zone in which upward moving buoyant gas transitions to form immobile gas hydrate deposits. Second, this zone is interesting because these areas have the potential to show a hydrate filled zone and a gas filled zone within the same sediments. Third, the fundamental measurement within seismic data is impedance contrasts between velocity*density layers. High saturation gas hydrates and free gas inhabit opposite ends of these measurements making the study of this zone ideal for investigating the seismic characteristics of gas hydrate and, hence, the investigation of other seismic attributes that may indicate gas hydrate fill.

Drying of encapsulated parts (nuclear fuel rods) in applying vacuum, by introducing dehydratings, vacuum, and filling with an inert gas

International Nuclear Information System (INIS)

Johnson, C.R.

1976-01-01

This invention concerns a decontamination technique, in particular a process and equipment for extracting the water contained in fuel rods and other similar components of a nuclear reactor. The extraction of the contaminants contained in the fuel rods is carried out by a standard method by drilling a small hole in the surface of the cladding and applying a vacuum to bleed the rod of its impurities (moisture and gas). The invention consists for example in applying a vacuum at the hole drilled in the cladding to extract the contaminants and introducing spirit into the rod through the same orifice. The spirit absorbs the remaining liquid and other impurities. The spirit charged with the impurities is then pumped out by the same aperture by means of a regulated atmosphere inside a closed receptacle. This receptacle is then filled with an inert gas cooled to ambient temperature. The rods are then pressurised and the small orifice is sealed [fr

Diet of the crayfish Paranephrops zealandicus in bush and pasture streams : insights from stable isotopes and stomach analysis

International Nuclear Information System (INIS)

Hollows, J.W.; Townsend, C.R.; Collier, K.J.

2002-01-01

Crayfish (Paranephrops zealandicus White) stomachs from streams in both native bush (mainly tree leaves and dicotyledonous seeds) and exotic pasture settings (mainly grass stems and monocotyledonous seeds) were dominated by allochthonous material. More detritus occurred in stomachs in autumn-winter than in spring-summer, but quantities were similar in crayfish from native bush and pasture streams. The stomachs of larger crayfish contained a significantly greater proportion of detritus than smaller individuals. Aquatic invertebrates were the second most abundant dietary category by volume, with highest values in winter, but there were no significant differences between land uses or crayfish size classes. A wide range of invertebrates was eaten by crayfish, with mayfly nymphs, chironomid larvae, and snails predominating. The latter were numerically more prominent in crayfish from bush than pasture streams. Terrestrial invertebrates were recorded from 4% of stomachs, but there were no significant differences in relation to land use, season, or crayfish size class. Despite aquatic invertebrates making up 13 C and perhaps of microfloral origin, seems to be an important energy source for crayfish in both stream types. (author). 52 refs., 5 figs., 2 tabs

Effect of Different Filling Materials in Anammox Bacteria Enrichment

Directory of Open Access Journals (Sweden)

Dilek ÖZGÜN

2012-12-01

Full Text Available Purpose: Anaerobic ammonium oxidation (Anammox is a process that ammonium as electron donor is oxidized to nitrogen gas using nitrite as electron acceptor. Compared to conventional nitrification-denitrification processes, this process is used less oxygen and no organic material (methanol, glucose. However, the slow growth rate of Anammox bacteria (11-30 days is disadvantages. Therefore, batch reactors have been carried out in these bacteria enrichment. In this study continuously operated upflow anaerobic sludge reactor (UASB using different filling materials disposing of sensitive and slow-growing Anammox bacteria out of the system is purposed. Design and Methods: System is operated up-flow column reactor at 2 days hydraulic retention time (HRT in 45 days. In this study, ceramic stones and Linpor filling material are used. Using synthetic wastewater containing ammonium and nitrite, Ar/CO2 anaerobic conditions (95/5% supplied with gas. System is operated at a temperature 253 C in UASB. Temperature, pH, ammonia-nitrogen and nitrite nitrogen are measured. Results: Both filling material reactors are operated in 45 days. Ceramic stones filling reactor is observed quickly reaches 90% were used reactor ammonium removal. The ammonium nitrogen removal was slower in Linpor filling materials reactor. Nitrite removal is reached up to 90% in both the reactor. When compared to the stoichiometric equation in Linpor was composed of large amounts of nitrate. At the end of 25 days the results were similar to ceramic stone filling reactor with Linpor filling material reactors. Conclusions and Original Value: Anammox process as from nitrogen removal processes was discovered in 1995. Anammox bacteria that make up this process due to very low growth rates of microbial bacteria in the system must be kept in the system. Most of the studies in the literature, these bacteria enrichment stage is started instead of a continuous batch reactor system. In this study

Development and Testing of Physically-Based Methods for Filling Gaps in Remotely Sensed River Data

Science.gov (United States)

2011-09-30

Filling Gaps in Remotely Sensed River Data Jonathan M. Nelson US Geological Survey National Research Program Geomorphology and Sediment Transport...the research work carried out under this grant are to develop and test two methods for filling in gaps in remotely sensed river data. The first...information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215

Natural gas as fuel - chances and risks; Erdgas als Kraftstoff-Chancen und Risiken.

Energy Technology Data Exchange (ETDEWEB)

Wackertapp, H.; Wember, G. [Ruhrgas AG, Essen (Germany)

2001-11-01

By reducing the tax payable on natural gas as part of the ecological tax reform, the German government has created the economic framework for the break-through of the automotive fuel, natural gas. Consequently, natural gas has since become much more popular for driving motor engines. The gas industry sees its main task as the development of a natural gas filling station network. There are currently about 200 filling stations with natural gas fuelling facilities in Germany. (orig.) [German] Die Bundesregierung hat mit der in der oekologischen Steuerreform verankerten Mineraloelsteuerbeguenstigung fuer Erdgas die wirtschaftlichen Voraussetzungen fuer einen Durchbruch des neuen Kraftstoffs ''Erdgas'' geschaffen. Demzufolge hat der mobile Einsatz von Erdgas deutlich an Bedeutung gewonnen. Die Gaswirtschaft sieht den Aufbau der Betankungsinfrastruktur als ihre Hauptaufgabe an. Aktuell kann an etwa 200 Tankstellen Erdgas getankt werden. (orig.)

Some ecological side-effects of chemical and physical bush clearing in a southern African rangeland ecosystem

Czech Academy of Sciences Publication Activity Database

Haussmann, N. S.; Kalwij, Jesse; Bezuidenhout, S.

2016-01-01

Roč. 102, JAN 2016 (2016), s. 234-239 ISSN 0254-6299 Institutional support: RVO:67985939 Keywords : Acacia giraffae * bush encroachment * physical soil disturbance Subject RIV: EF - Botanics Impact factor: 1.427, year: 2016

Alpha radiation gauge for the measurement of gas density

International Nuclear Information System (INIS)

Lech, M.

1977-01-01

Alpha gauge for the measurement of gas density with thick alfa source, has been developed. The gauge is based on radiation transmission through a space filled with gas and total-count principle. Air density can be measured in the range 1,2 - 1,27 kg m -3 with a maximum standard deviation of 2 x 10 -3 kg m -3 . (author)

The USA policy evolution in the Caspian sea from Clinton to Bush; L'evolution de la politique americaine dans la region de la mer Caspienne de Clinton a Bush

Energy Technology Data Exchange (ETDEWEB)

Jafalian, A

2003-07-01

The author analyzes the USA policy in the Caspian Sea area and its evolution with the election of Bush. If no major orientation appear, some sensible evolutions are presented concerning the pipelines management in this area. The author presents then, the new definition of the economical variables and the reinforcement of the security dimension of the USA policy. (A.L.B.)

Hugoniot-based equations of state for two filled EPDM rubbers

Science.gov (United States)

Pacheco, Adam; Dattelbaum, Dana; Orler, E.; Gustavsen, R.

2013-06-01

The shock response of silica filled and Kevlar filled ethylene-propylene-diene (EPDM) rubbers was studied using gas gun-driven plate impact experiments. Both materials are proprietary formulations made by Kirkhill-TA, Brea CA USA, and are used for ablative internal rocket motor insulation. Two types of experiments were performed. In the first, the filled-EPDM sample was mounted on the front of the projectile and impacted a Lithium Fluoride (LiF) window. The Hugoniot state was determined from the measured projectile velocity, the EPDM/LiF interface velocity (measured using VISAR) and impedance matching to LiF. In the second type of experiment, electromagnetic particle velocity gauges were embedded between layers of filled-EPDM. These provided in situ particle velocity and shock velocity measurements. Experiments covered a pressure range of 0.34 - 14 GPa. Hugoniot-based equations of state were obtained for both materials, and will be compared to those of other filled elastomers such as silica-filled polydimethylsiloxane and adiprene. Work performed while at Los Alamos National Laboratory.

Magnetic discharge accelerating diode for the gas-filled pulsed neutron generators based on inertial confinement of ions

International Nuclear Information System (INIS)

Kozlovskij, K I; Shikanov, A E; Vovchenko, E D; Shatokhin, V L; Isaev, A A; Martynenko, A S

2016-01-01

The paper deals with magnetic discharge diode module with inertial electrostatic ions confinement for the gas-filled pulsed neutron generators. The basis of the design is geometry with the central hollow cathode surrounded by the outer cylindrical anode and electrodes made of permanent magnets. The induction magnitude about 0.1-0.4 T in the central region of the discharge volume ensures the confinement of electrons in the space of hollow (virtual) cathode and leads to space charge compensation of accelerated ions in the centre. The research results of different excitation modes in pulsed high-voltage discharge are presented. The stable form of the volume discharge preserveing the shape and amplitude of the pulse current in the pressure range of 10 -3 -10 -1 Torr and at the accelerating voltage up to 200 kV was observed. (paper)

Vertical Scan-Conversion for Filling Purposes

OpenAIRE

Hersch, R. D.

1988-01-01

Conventional scan-conversion algorithms were developed independently of filling algorithms. They cause many problems, when used for filling purposes. However, today's raster printers and plotters require extended use of filling, especially for the generation of typographic characters and graphic line art. A new scan-conversion algorithm, called vertical scan-conversion has been specifically designed to meet the requirements of parity scan line fill algorithms. Vertical scan-conversion ensures...

An Associative Index Model for the Results List Based on Vannevar Bush's Selection Concept

Science.gov (United States)

Cole, Charles; Julien, Charles-Antoine; Leide, John E.

2010-01-01

Introduction: We define the results list problem in information search and suggest the "associative index model", an ad-hoc, user-derived indexing solution based on Vannevar Bush's description of an associative indexing approach for his memex machine. We further define what selection means in indexing terms with reference to Charles…

Gas development plan - Estonia

International Nuclear Information System (INIS)

1994-06-01

The total supply of natural gas to Estonia is provided by the Russian company ''Lentransgas'', a 10 year contract is under negotiation. The gas transmission system is physically a part of the transmission network in the Baltic region which previously operated as an integral part of the USSR gas transmission system. The potential market is too small to justify investment in an alternative pipeline from the North Sea. The general reduction in purchasing power in the former COMECON countries has resulted in a decreased industrial production in Estonia and lead to a steep decline in natural gas consumption in all sectors except households. The Danish firm ''Dansk Olie og Naturgas A/S'' has been requested to assist the Estonian company ''AS Eesti Gaas J.S.C.'' in preparing a gas development plan for Estonia. Phase 1 of this plan aims to provide a detailed description of the status of the existing situation under the headings of gas supply and demand, transmission and distribution, economy and organization. The most important problems related to the current transition of the Estonian gas sector towards operation under market conditions are addressed, focussing on gas supply and market conditions, flow control and metering. The general organization of the gas sector in Estonia is described and possible models for future organization are discussed. Some recommendations are given and areas in need of further investigation are identified. (AB)

Total pressing Indonesian gas development, exports

International Nuclear Information System (INIS)

Anon.

1994-01-01

Total is on track to become Indonesia's leading gas exporter by the turn of the century. Total's aggressive development of its Mahakam Delta acreage in East Kalimantan is intended to keep pace with growing liquefied natural gas demand, mainly from Japan but also increasingly from South Korea and Taiwan. A frantic scramble is under way among natural gas suppliers in the Pacific Rim region, particularly those with current LNG export facilities, to accommodate projections of soaring natural gas demand in the region. Accordingly, Total's Indonesian gas production goal is the centerpiece of a larger strategy to become a major player in the Far East Asia gas scene. Its goals also fall in line with Indonesia's. Facing flat or declining oil production while domestic oil demand continues to soar along with a rapidly growing economy, Indonesia is heeding some studies that project the country could become a net oil importer by the turn of the century. The paper describes Total's Far East strategy, the Mahakam acreage which it operates, the shift to gas development, added discoveries, future development, project spending levels, and LNG export capacity

The RIKEN gas-filled recoil separator and a possible new approach to superheavy elements by the (HI, αxn) reaction

International Nuclear Information System (INIS)

Nomura, T.

1990-10-01

The (HI, αxn) reaction, in which precompound α particle emission takes place, is shown to occur significantly even near the Coulomb barrier. Because the α emission can efficiently cool down a highly excited nucleus both in energy and angular momentum, it is considered to be very effective for production of heavy elements like SHE. However, the angular distributions of residual nuclei produced in this reaction are side-peaked, requiring a recoil-type separator with large angular acceptance when it is applied for collection of the relevant nuclei. A brief description is given about a gas-filled separator recently constructed at RIKEN, which meets the above requirement. (author)

Lizard community structure across a grassland - creosote bush ecotone in the Chihuahuan Desert

OpenAIRE

Menke, Sean B

2003-01-01

I investigated the distribution and abundance of lizard species (Aspidoscelis inornatus, Aspidoscelis tesselatus, Aspidoscelis tigris, Aspidoscelis uniparens, Cophosaurus texanus, Crotaphytus collaris, Eumeces obsoletus, Gambelia wislizenii, Holbrookia maculata, Phrynosoma cornutum, Sceloporus magister, and Uta stansburiana) across a desert grassland - creosote bush (Larrea tridentata) ecotone in Dona Ana County, New Mexico. The ecotonal area in the Jomada del Muerto basin has increased drama...

Degassing, gas retention and release in Fe(0) permeable reactive barriers.

Science.gov (United States)

Ruhl, Aki S; Jekel, Martin

2014-04-01

Corrosion of Fe(0) has been successfully utilized for the reductive treatment of multiple contaminants. Under anaerobic conditions, concurrent corrosion leads to the generation of hydrogen and its liberation as a gas. Gas bubbles are mobile or trapped within the irregular pore structure leading to a reduction of the water filled pore volume and thus decreased residence time and permeability (gas clogging). With regard to the contaminant transport to the reactive site, the estimation of surface properties of the reactive material indicated that individual gas bubbles only occupied minor contact areas of the reactive surface. Quantification of gas entrapment by both gravimetrical and tracer investigations revealed that development of preferential flow paths was not significant. A novel continuous gravimetrical method was implemented to record variations in gas entrapment and gas bubble releases from the reactive filling. Variation of grain size fractions revealed that the pore geometry had a significant impact on gas release. Large pores led to the release of comparably large gas amounts while smaller volumes were released from finer pores with a higher frequency. Relevant processes are explained with a simplified pictorial sequence that incorporates relevant mechanisms. Copyright © 2014 Elsevier B.V. All rights reserved.

Production components and yield of bushing snap bean in conventional and organic production systems

Directory of Open Access Journals (Sweden)

Guilherme Renato Gomes

2017-10-01

Full Text Available Production systems influence crops differently, mainly in terms of yield. However, there are few studies that have evaluated different bushing snap bean genotypes in different systems. Thus, this study aimed to evaluate the production components and yield of bushing snap beans in conventional and organic production systems. The experimental design was a randomized complete block, in a factorial 6 × 2 arrangement, corresponding to six genotypes and two production systems, with three replications. The genotypes Isla Manteiga Baixo®, Isla Macarrão Baixo®, Feltrin Vicenza Amarelo Baixo®, and Feltrin Macarrão Napoli®, UEL 1, and UEL 2 were submitted to the following determinations: days to flowering; plant height; medium number of pods per plant; average pod mass, length, and diameter; and yield of commercial pods. A joint analysis of variance was conducted by applying the F test, with mean comparison performed using the Tukey’s test (p < 0.05. Anthesis of the genotypes Feltrin Vicenza Amarelo Baixo, UEL 2, Isla Macarrão Baixo, and Feltrin Macarrão Napoli is anticipated in the conventional production system. The genotype UEL 2 shows higher precocity in anthesis within the conventional system. The genotypes Isla Manteiga Baixo and UEL 1 produce more pods per plant in the conventional system. In the organic system, the genotype Feltrin Macarrão Napoli produces double the number of pods per plant compared with Isla Manteiga Baixo. The organic system leads to greater plant height and average mass, length, and diameter of pods in relation to the conventional system. The commercial pod yield of bushing snap bean is not altered by differences in the production system or genotype.

Development and characterization of hyaluronic acid-lysine nanoparticles with potential as innovative dermal filling

Directory of Open Access Journals (Sweden)

Jaqueline Carneiro

Full Text Available ABSTRACT Skin aging causes changes such as wrinkles and flaccidity leading to a large demand for aesthetic procedures, including dermal filling. A key agent in dermal filling is hyaluronic acid (HA, which is a naturally occurring glycosaminoglycan. However, it is a hydrophilic macromolecule that experiences great difficulty in crossing the skin barrier causing most commercial formulations containing it to be injectable, which in turn brings risks since they involve an invasive technique. In that sense, the aim of this study was to develop and characterize nanoparticles obtained from ionic interaction between HA and lysine (Lys for use as a potential agent of dermal filling for topical application, increasing and improving its applicability and safety. To this end, nanoparticles were obtained by dripping of Lys over HA under magnetic stirring. A nanometric size was confirmed and a suitable surface charge was obtained by zeta potential. Nanoparticles were almost spherical in shape with a smooth surface. Interaction between raw materials for preparing nanoparticles was studied by FTIR and NMR spectroscopy and an ionic interaction was confirmed. These physicochemical features suggest that obtained nanoparticles can be further used as a topical dermal filling.

Heavy ion beam propagation through a gas-filled chamber for inertial confinement fusion

International Nuclear Information System (INIS)

Barboza, N.O.

1996-10-01

The work presented here evaluates the dynamics of a beam of heavy ions propagating through a chamber filled with gas. The motivation for this research stems from the possibility of using heavy ion beams as a driver in inertial confinement fusion reactors for the purpose of generating electricity. Such a study is important in determining the constraints on the beam which limit its focus to the small radius necessary for the ignition of thermonuclear microexplosions which are the source of fusion energy. Nuclear fusion is the process of combining light nuclei to form heavier ones. One possible fusion reaction combines two isotopes of hydrogen, deuterium and tritium, to form an alpha particle and a neutron, with an accompanying release of ∼17.6 MeV of energy. Generating electricity from fusion requires that we create such reactions in an efficient and controlled fashion, and harness the resulting energy. In the inertial confinement fusion (ICF) approach to energy production, a small spherical target, a few millimeters in radius, of deuterium and tritium fuel is compressed so that the density and temperature of the fuel are high enough, ∼200 g/cm 3 and ∼20 keV, that a substantial number of fusion reactions occur; the pellet microexplosion typically releases ∼350 MJ of energy in optimized power plant scenarios

Possible health effects of liquefied petroleum gas on workers at filling and distribution stations of Gaza governorates.

Science.gov (United States)

Sirdah, M M; Al Laham, N A; El Madhoun, R A

2013-03-01

Liquefied petroleum gas (LPG) is widely used in the Gaza Strip for domestic purposes, in agriculture and industry and, illegally, in cars. This study aimed to identify possible health effects on workers exposed to LPG in Gaza governorates. Data were collected by a questionnaire interview, and haematological and biochemical analyses of venous blood samples were made from 30 workers at filling and distribution stations and 30 apparently healthy controls. Statistically significant differences were found in all self-reported health-related complaints among LPG workers versus controls. LPG workers had significantly higher values of red blood cell counts, haemoglobin, haematocrit mean corpuscular haemoglobin and platelet counts. They also had significantly higher values of kidney function tests (urea, creatinine and uric acid) and liver function enzyme activities (aspartate aminotransferase and alanine aminotransferase). LPG workers at Gaza Strip petroleum stations are at higher risk for health-related symptoms and clinical abnormalities.

Ultrafast Raman scattering in gas-filled hollow-core fibers

OpenAIRE

Belli, Federico

2017-01-01

The experimental and numerical work reported here is rooted in ultrafast molecular phenomena and nonlinear fiber optics, which are brought together in a deceptively simple system: a homo-nuclear molecular gas (e.g. H2,D2) loaded in the hollow-core of a broad-band guiding photonic crystal fiber (PCF) and exposed to ultrashort pulses of moderate energies (∼ μJ). On one hand, the choice of a molecular gas as the nonlinear medium provides a rich playground for light-matter interactions. ...

78 FR 58604 - Safety Advisory: Unauthorized Filling of Compressed Gas Cylinders

Science.gov (United States)

2013-09-24

... under pressure during normal transportation and use. Extensive property damage, serious personal injury... unless and until they are first subjected to a visual inspection and pressure test by an individual or... Cloverdale Street, Detroit, MI 48021, improperly filled and offered for transportation high pressure...

Formation of gas bubbles in gas superheated water

International Nuclear Information System (INIS)

Finkelstein, Y.

1984-05-01

The phenomenon of bubbles formation in supersaturated solutions of gases in water is a transport process, the final result of which is a separation of phases. In spite of its widespread appearance in industry and in nature, no model exists that can explain it and predict the degree of supersaturation which a gas-water solution can tolerate before bubbles are formed. The objective of this study was to fill this gap, and indeed, an extensive experimental work was carried out, a model was established and simple but accurate means were developed for predicting the tolerable degree of supersaturation of gas-water solutions. The model is also capable of predicting quite accurately the activation phenomenon in water. Superheating and supercooling phenomena were also examined in the light of the new model. (author)

Understanding the dynamics of photoionization-induced nonlinear effects and solitons in gas-filled hollow-core photonic crystal fibers

Energy Technology Data Exchange (ETDEWEB)

Saleh, Mohammed F.; Biancalana, Fabio [Max Planck Institute for the Science of Light, Guenther-Scharowsky Str. 1, DE-91058 Erlangen (Germany)

2011-12-15

We present the details of our previously formulated model [Saleh et al., Phys. Rev. Lett. 107, 203902 (2011)] that governs pulse propagation in hollow-core photonic crystal fibers filled by an ionizable gas. By using perturbative methods, we find that the photoionization process induces the opposite phenomenon of the well-known Raman self-frequency redshift of solitons in solid-core glass fibers, as was recently experimentally demonstrated [Hoelzer et al., Phys. Rev. Lett. 107, 203901 (2011)]. This process is only limited by ionization losses, and leads to a constant acceleration of solitons in the time domain with a continuous blueshift in the frequency domain. By applying the Gagnon-Belanger gauge transformation, multipeak ''inverted gravitylike'' solitary waves are predicted. We also demonstrate that the pulse dynamics shows the ejection of solitons during propagation in such fibers, analogous to what happens in conventional solid-core fibers. Moreover, unconventional long-range nonlocal interactions between temporally distant solitons, unique of gas plasma systems, are predicted and studied. Finally, the effects of higher-order dispersion coefficients and the shock operator on the pulse dynamics are investigated, showing that the conversion efficiency of resonant radiation into the deep UV can be improved via plasma formation.

Novel gas-based detection techniques

International Nuclear Information System (INIS)

Graaf, Harry van der

2009-01-01

This year we celebrate the 100th birthday of gaseous detectors: Hans Geiger operated the first gas-filled counter in Manchester in 1908. The thin wires, essential for obtaining gas amplification, have been replaced by Micro Pattern Gas Detectors (MPGDs): Micromegas (1995) and GEM (1996). In the GridPix detector, each of the grid holes of a MPGD is equipped with its own electronic readout channel in the form of an active pixel in suitable pixel CMOS chips. By means of MEMS technology, the grid has been integrated with the chip, forming a monolithic readout device for gas volumes. By applying a protection layer made of hydrogenated amorphous silicon, the chips can be made spark proof. New protection layers have been made of silicon nitride. The use of gas as detection material for trackers is compared to Si, and the issue of chamber aging is addressed. New developments are set out: the development of Micro Channel Plates, integrated on pixel chips, the development of electron emission foil, and the realization of TimePix-2: a general-purpose pixel chip with time and amplitude measurement, per pixel, of charge signals.

Review of fill mining technology in Canada

Energy Technology Data Exchange (ETDEWEB)

Singh, K. H.; Hedley, D. G.F.

1980-05-15

The Canadian mining industry has a long history of being in the fore-front in developing new technology in underground hardrock mines. Examples include the development of hydraulic and cemented fills, undercut-and-fill, mechanized cut-and-fill, post pillar, vertical retreat and blasthole mining methods. The evolution of this technology is briefly described in an historical review. Backfill serves many functions, although it is generally considered in terms of its support capabilities. These functions, mainly related to the mining method used, are evaluated in regard to regional support, pillar support, fill roof, working floor, dilution control and waste disposal. With the advent of blasthole and vertical retreat methods for pillar recovery operations, the freestanding height of backfill walls has assumed greater importance. Consequently, more attention is being given to what fill properties are required to achieve fill wall exposures up to 25 m wide by 90 m high. With the large increases in energy costs, alternatives to partially replace Portland cement in fill are being examined. The validation of mining concepts and the interaction of backfill is perhaps best evaluated by in-situ measurements. Examples are given of stress, deformation and fill pressure measurements in longitudinal cut-and-fill, post pillar mining and blasthole stoping with delayed fill which were taken in several mines in Canada. Finally, the overall design procedure used in deciding mining method, stope and pillar dimensions, sequence of extraction, fill properties and support systems at a new mine is described.

The Answer to Rising Gas Prices...Nitrogen?

Science.gov (United States)

Lee, Frank; Batelaan, Herman

2010-01-01

It is claimed by the company NitroFill and the GetNitrogen Institute that filling car tires with nitrogen improves gas mileage considerably. The reason given is that oxygen leaks out of tires so that the increased rolling friction causes a reduced gas mileage. Because it is hard to do an actual road test, we report on a simple visual test of…

LA IDEOLOGÍA NEOCONSERVADORA Y EL GOBIERNO DE GEORGE W. BUSH

Directory of Open Access Journals (Sweden)

John Saxe Fernández

2004-07-01

Full Text Available El 15 de Septiembre de 2002, casi al año de los ataques contra las Torres Gemelas y el Pentágono,el Sunday Herald informó sobre la existencia de un plan elaborado por un instituto “neo-conservador”,ese es el término usado en la nota periodística,identificado como el “Proyecto para un Nuevo Siglo Estadounidense”, que empezó a funcionar en1997.Este instituto se orientó al impulso de lo que su documento fundacional califica como “una política reaganiana de fortaleza militar y de claridad moral”, considerada como algo “necesario para que EUA, basado en los éxitos del siglo pasado, consolide nuestra seguridad y nuestra grandeza en el próximo siglo”. El documento, de línea ultranacionalista, plantea la “creación de una Pax Americana Global”, y fue endosado por DickCheney, Donald Rumsfeld, Paul Wolfowitz, JeffBush y Lewis Lobby, jefe del personal de Cheney, con la participación de operadores políticos eideólogos como Elliott Abrams y Francis Fukuyama. El Sunday Herald enfatizó que, según el documento, “antes de que asumiera la presidencia en Enero de 2000, Bush y su gabineteya estaban contemplando y planeando un “cambio de régimen” en Irak por medio de un ataque premeditado contra ese país.

Development of a gas-generation model for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Brush, L.H.; Storz, L.J.; Garner, J.W.

1993-01-01

Design-basis transuranic (TRU) waste to be emplaced in the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico may generate significant quantities of gas, which may affect the performance of the WIPP with respect to regulations for radioactive and/or chemically hazardous waste constituents. We are developing a model to predict gas generation in WIPP disposal rooms during and after filling and sealing. Currently, the model includes: (1) oxic and anoxic corrosion of steels and other Fe-base alloys, including passivation and depassivation; (2) microbial degradation of cellulosics with O 2 , NO 3 - , FeO(OH), SO 4 2- , or CO 2 as the electron acceptor; (3) α radiolysis of brine; (4) consumption of CO 2 and, perhaps, H 2 S by Ca(OH) 2 (in cementitious materials) and CaO (a potential backfill additive). The code simulates these processes and interactions among them by converting reactants (steels, cellulosics, etc.) to gases and other products at experimentally observed or estimated rates and plotting temporal reaction paths in three-dimensional phase diagrams for solids in the Fe-H 2 O-CO 2 -H 2 -H 2 S system

Calculation of loading on pipes during filling processes

International Nuclear Information System (INIS)

Thiele, Thomas; Swidersky, Harald

2013-01-01

Filling processes in pipe systems do normally not belong to load design cases for which the integrity of pipelines and their mountings are verified with fluid- and structure-dynamic analysis. However, their frequency of occurrence is several times higher than those of the postulated incident-induced transients. That is why they have to be taken into consideration within fatigue analysis. The loading on pipes or rather on their mountings during filling processes originates from differences in the density of the transported fluids, e.g. at transport of gas slugs within water flow. The exposure time of the flow momentum force is fixed by the height of the flow velocity and by the length of discontinuities in the pipeline sections. Filling procedures frequently end with a pressure surge which was caused by the impingement and decelaration of the water plug at orifices in pipe systems. The calculation of such processes with 1D fluid-dynamic or rather thermal-hydraulic programs requires an idealization of the real form of the two phase flow or respectively of the two phase interface. In the past, several two phase flow regime maps were developed and implemented in codes for this. In this paper, the applicability of the thermo-hydraulic program RELAP5/MOD3.3 which is established in nuclear engineering is examined in order to calculate realistic loads from plug flows during the filling processes. For this, post-test calculations of experiments have been performed and the results have been compared with the experimental results as well as with the classical analytical approach according to Joukowsky. The comparison shows that, dependent on the discretization, the calculated loads are indeed partly underestimated, though the calculation results according to the Joukowsky-approach lie above the measurements. (orig.)

Technology of hardening fills for mined spaces

International Nuclear Information System (INIS)

Simek, P.; Holas, M.; Chyla, A.; Pech, P.

1985-01-01

The technology is described of hardening fills for mined spaces of uranium deposits in North Bohemian chalk. A special equipment was developed for the controlled preparation of a hardening mixture. The composition of the fill is determined by the strength of the filled rock, expecially by the standard strength, i.e., the minimal strength of the filling under uniaxial pressure. The said parameter determines the consumption of binding materials and thereby the total costs of the filling. A description is presented of the filling technology, including rabbit tube transport of the mixture and quality control. (Pu)

Compressed natural gas vehicles motoring towards a green Beijing

Energy Technology Data Exchange (ETDEWEB)

Yang, Ming; Kraft-Oliver, T. [International Institute for Energy Conservation (IIEC) - Asia, Bangkok (Thailand); Guo Xiao Yan [China North Vehicle Research Institute (CNVRI), Beijing (China)

1996-12-31

This paper first describes the state-of-the-art of compressed natural gas (CNG) technologies and evaluates the market prospects for CNG vehicles in Beijing. An analysis of the natural gas resource supply for fleet vehicles follows. The costs and benefits of establishing natural gas filling stations and promoting the development of vehicle technology are evaluated. The quantity of GHG reduction is calculated. The objective of the paper is to provide information of transfer niche of CNG vehicle and equipment production in Beijing. This paper argues that the development of CNG vehicles is a cost-effective strategy for mitigating both air pollution and GHG.

“Greenwashing gas: Might a ‘transition fuel’ label legitimize carbon-intensive natural gas development?”

International Nuclear Information System (INIS)

Stephenson, Eleanor; Doukas, Alexander; Shaw, Karena

2012-01-01

Natural gas is widely considered to be the crucial “bridging fuel” in the transition to the low-carbon energy systems necessary to mitigate climate change. This paper develops a case study of the shale gas industry in British Columbia (BC), Canada to evaluate this assumption. We find that the transition fuel argument for gas development in BC is unsubstantiated by the best available evidence. Emissions factors for shale gas and LNG remain poorly characterized and contested in the academic literature, and context-specific factors have significant impacts on the lifecycle emissions of shale gas but have not been evaluated. Moreover, while the province has attempted to frame natural gas development within its ambitious climate change policy, this framing misrepresents substantive policy on gas production. The “transition fuel” and “climate solution” labels applied to development by the BC provincial government risk legitimizing carbon-intensive gas development. We argue that policy makers in BC and beyond should abandon the “transition fuel” characterization of natural gas. Instead, decision making about natural gas development should proceed through transparent engagement with the best available evidence to ensure that natural gas lives up to its best potential in supporting a transition to a low-carbon energy system. - Highlights: ► Transition fuel discourse may greenwash gas development. ► Gaps in research obscure emissions factors for LNG and shale gas. ► Climate solution label for shale gas and LNG development in BC is unsubstantiated.

Bush School Capstone course support : the regional impact of climate change on transportation infrastructure and decision making.

Science.gov (United States)

2009-09-01

The Master of Public Service and Administration program at Texas A&Ms Bush School of Government : and Public Service requires that all second year graduate students participate in a two semester Capstone : course. These courses represent the pract...

FIBER LASER CONSTRUCTION AND THEORY INCLUDING FIBER BRAGG GRATINGS Photonic Crystal Fibers (PCFs) and applications of gas filled PCFs

Energy Technology Data Exchange (ETDEWEB)

Sutton, Jacob O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-03-08

The principles used in fiber lasers have been around for a while but it is only within the past few years that fiber lasers have become commercially available and used in high power laser applications. This paper will focus on the basic design principles of fiber lasers, including fiber Bragg gratings, principles of operation, and forms of non-linear effects. It will describe the type and associated doping of the fiber used and difficult designs used to guide energy from the pump to the active medium. Topics covered include fiber laser design, fiber Bragg gratings, materials used, differences in quantum energy loss, thermo-optical effects, stimulated Raman scattering, Brillouin scattering, photonic crystal fibers and applications of gas filled Photonic Crystal Fibers (PCFs). Thanks to fiber lasers, the energy required to produce high power lasers has greatly dropped and as such we can now produce kW power using a standard 120V 15A circuit. High power laser applications are always requiring more power. The fiber laser can now deliver the greater power that these applications demand. Future applications requiring more power than can be combined using standard materials or configurations will need to be developed to overcome the high energy density and high non-linear optical scattering effects present during high power operations.

Adequacy of environmental information for outer continental shelf oil and gas decisions: Florida and California

International Nuclear Information System (INIS)

1989-01-01

The environmental impacts of oil and gas production on the U.S. outer continental shelf (OCS) have been studied and debated for many years. The issues derive from the complexity of coastal and offshore marine processes and ecosystems, human socio-economic systems, and interactions with OCS oil and gas development activities. On Feb. 9, 1989, President Bush announced his decision to postpone leasing for OCS areas off southwestern Florida (sale 116, part 2), northern California (sale 91), and southern California (sale 95). At the same time, the President created a cabinet-level task force to review the environmental concerns for these three OCS areas, and he also requested independent advice from the National Research Council (NRC). The NRC was asked to assess the adequacy of the available scientific and technical information on estimated hydrocarbon resources and potential environmental effects for the three specified areas. The report, by the OCS Committee and its three panels dealing with ecology, physical oceanography, and socioeconomics, reviews the adequacy of information bearing upon the potential environmental impacts of OCS oil and gas activities for the three sale areas

Bush püüdis leevendada tšehhide Vene-hirmu / Arko Olesk

Index Scriptorium Estoniae

Olesk, Arko, 1981-

2007-01-01

Ilmunud ka: Postimees : na russkom jazõke, 6. juuni 2007, lk. 9. Prahat külastanud USA president George W. Bush kinnitas oma kõnes, et külm sõda on läbi ning Tšehhi ei pea valima USA ja Venemaa sõbraks olemise vahel, samas kritiseeris ta Venemaad demokraatia puudumise pärast. Vt. samas: Poola langetab raketikilbi otsuse pärast Bushi visiiti

Advanced IGCC/Hydrogen Gas Turbine Development

Energy Technology Data Exchange (ETDEWEB)

York, William [General Electric Company, Schenectady, NY (United States); Hughes, Michael [General Electric Company, Schenectady, NY (United States); Berry, Jonathan [General Electric Company, Schenectady, NY (United States); Russell, Tamara [General Electric Company, Schenectady, NY (United States); Lau, Y. C. [General Electric Company, Schenectady, NY (United States); Liu, Shan [General Electric Company, Schenectady, NY (United States); Arnett, Michael [General Electric Company, Schenectady, NY (United States); Peck, Arthur [General Electric Company, Schenectady, NY (United States); Tralshawala, Nilesh [General Electric Company, Schenectady, NY (United States); Weber, Joseph [General Electric Company, Schenectady, NY (United States); Benjamin, Marc [General Electric Company, Schenectady, NY (United States); Iduate, Michelle [General Electric Company, Schenectady, NY (United States); Kittleson, Jacob [General Electric Company, Schenectady, NY (United States); Garcia-Crespo, Andres [General Electric Company, Schenectady, NY (United States); Delvaux, John [General Electric Company, Schenectady, NY (United States); Casanova, Fernando [General Electric Company, Schenectady, NY (United States); Lacy, Ben [General Electric Company, Schenectady, NY (United States); Brzek, Brian [General Electric Company, Schenectady, NY (United States); Wolfe, Chris [General Electric Company, Schenectady, NY (United States); Palafox, Pepe [General Electric Company, Schenectady, NY (United States); Ding, Ben [General Electric Company, Schenectady, NY (United States); Badding, Bruce [General Electric Company, Schenectady, NY (United States); McDuffie, Dwayne [General Electric Company, Schenectady, NY (United States); Zemsky, Christine [General Electric Company, Schenectady, NY (United States)

2015-07-30

The objective of this program was to develop the technologies required for a fuel flexible (coal derived hydrogen or syngas) gas turbine for IGCC that met DOE turbine performance goals. The overall DOE Advanced Power System goal was to conduct the research and development (R&D) necessary to produce coal-based IGCC power systems with high efficiency, near-zero emissions, and competitive capital cost. To meet this goal, the DOE Fossil Energy Turbine Program had as an interim objective of 2 to 3 percentage points improvement in combined cycle (CC) efficiency. The final goal is 3 to 5 percentage points improvement in CC efficiency above the state of the art for CC turbines in IGCC applications at the time the program started. The efficiency goals were for NOx emissions of less than 2 ppm NOx (@15 % O2). As a result of the technologies developed under this program, the DOE goals were exceeded with a projected 8 point efficiency improvement. In addition, a new combustion technology was conceived of and developed to overcome the challenges of burning hydrogen and achieving the DOE’s NOx goal. This report also covers the developments under the ARRA-funded portion of the program that include gas turbine technology advancements for improvement in the efficiency, emissions, and cost performance of gas turbines for industrial applications with carbon capture and sequestration. Example applications could be cement plants, chemical plants, refineries, steel and aluminum plants, manufacturing facilities, etc. The DOE’s goal for more than 5 percentage point improvement in efficiency was met with cycle analyses performed for representative IGCC Steel Mill and IGCC Refinery applications. Technologies were developed in this program under the following areas: combustion, larger latter stage buckets, CMC and EBC, advanced materials and coatings, advanced configurations to reduce cooling, sealing and rotor purge flows, turbine aerodynamics, advanced sensors, advancements in first

The political impact of WTO rules : steel tariffs and the Bush administration / William L Burns

Index Scriptorium Estoniae

Burns, William L

2004-01-01

USA president George W. Bush kuulutas märtsis 2002 välja 30-protsendilise tolli kehtestamise suurele osale teraseimpordist eesmärgiga aidata Ameerika terasetööstusel kohaneda välismaise terase sisseveoga. Poliitiliselt mõjuvõimas Ühendriikide terasetööstus on tollide rakendamist nõudnud juba neli aastat

Gas industry development in Egypt

International Nuclear Information System (INIS)

Roze, J.; Longueville, P.

2000-01-01

Egypt is a country with major gas potential and its gas industry has grown rapidly over the last ten years. Proven natural gas reserves total an estimated 1,050 billion m 3 . According to the re-evaluation of reserves made in January 2000, probable reserves stand at 3,400 billion m 3 , placing Egypt in ninth position as a potential world producer. These reserves are contained in 120 fields located mainly in the Nile Delta and Mediterranean regions and, to a lesser extent, in the Western Desert and the Gulf of Suez. Over the last two years, 54 new gas field have been discovered and registered. Consumption of oil, Egypt's main primary energy source, has declined steadily since the early 1980's in favour of natural gas, which has enjoyed steady growth. The penetration of natural gas is due to the growth of industries consuming large quantities of gas (chemical, fertilizers, etc), the development of new gas fields and the use of gas as a substitute for oil and coal, especially in the power industry which accounts for a major share of energy consumption, i.e., two-thirds of production in 1997. However, as Egypt is currently neither an importer or exporter of natural gas, the growth in consumption has naturally followed that of production, and the lack of infrastructure explains the limited penetration of gas in the residential sector (less than 2 % in 1997). According to the gas development plan drawn up by the Egyptian authorities, internal consumption should increase from 13.5 billion m 3 per year in 1998 to around 45.5 billion m 3 per year in 2017. This consumption increase will be accelerated to respond to domestic needs and, in particular, to favour the implementation of the national redevelopment plan (distribution of the population over 25% of the country by 2020, compared to 4% day). The energy vector of this urban policy is gas. Moreover, this policy should offset the drop in income resulting from declining oil production. The Egyptian authorities, via a range

Investigations of space charge effects in the cryogenic gas filled stopping cell for the FRS ion catcher

Energy Technology Data Exchange (ETDEWEB)

Heisse, Fabian [IKTP, TU Dresden (Germany); GSI Helmholtzzentrum fuer Schwerionenforschung (Germany); Dickel, Timo; Plass, Wolfgang; Geissel, Hans; Scheidenberger, Christoph [II. Physikalisches Institut, JLU Giessen (Germany); GSI Helmholtzzentrum fuer Schwerionenforschung (Germany); Reiter, Moritz Pascal; Rink, Ann-Kathrin [II. Physikalisches Institut, JLU Giessen (Germany); Zuber, Kai [IKTP, TU Dresden (Germany); Collaboration: FRS Ion Catcher-Collaboration

2015-07-01

At the FRS Ion Catcher experiment precision mass measurements of short lived projectile and fission fragments are performed. Therefore highly charged ions with relativistic energies need to be thermalized to kinetic energies of several eV. This process takes place in the cryogenic gas filled stopping cell (CSC). All stopping cells suffer at large ion rates under space charge effects, which lead to decreasing efficiencies and can also influence the extraction time. Thus the understanding of space charge effects is of greatest importance to make full use of the higher yields at future rare ion beam facilities like FAIR. For this purpose simulation with the software SIMION {sup registered} concerning space charge effects were done. In this presentation the calculated transport efficiency of the CSC for different intensities, electric fields and spill structures are discussed and compared with measured results. Furthermore an outlook and first results of the simulation for the new CSC for the Low-Energy Branch at FAIR are given.

Studies of implosion dynamics of D3He gas-filled plastic targets using nuclear diagnostics at OMEGA

International Nuclear Information System (INIS)

Falk, Magnus

2004-09-01

Information about target-implosion dynamics is essential for understanding how assembly occurs. Without carefully tailored assembly of the fuel, hot-spot ignition on National Ignition Facility (NIF) will fail. Hot spot ignition relies on shock convergence to 'ignite' the hot spot (shock burn), followed by propagation of the burn into the compressed shell material (compressive burn). The relationship between these events must be understood to ensure the success of Inertial Confinement Fusion (ICF) ignition. To further improve our knowledge about the timing of these events, temporal evolution of areal density (density times radius, normally referred to as ρR) and burn of direct-drive, D 3 He gas-filled plastic target implosions have been studied using dd neutrons and d 3 He protons. The proton temporal diagnostic (PTD) code was developed for this purpose. ρR asymmetries were observed at shock-bang time (time of peak burn during shock phase) and grew approximately twice as fast as the average ρR, without any phase changes. Furthermore, it was observed that the shock-bang and compression-bang time occur earlier, and that the time difference between these events decreases for higher laser energy on target, which indicates that the compression-bang time is more sensitive to the variation of laser energy on target. It was also observed that the duration of shock and compression phase might decrease for higher laser energy on target

Development of gas markets in developing countries and in countries in economical transition

International Nuclear Information System (INIS)

Roze, J.; Guegan, G.; Guerrini, Y.; Marzeau, J.M.

2000-01-01

The WOC 10 working committee of the CMG 2000 worldwide gas congress was devoted to the study of gas markets in developing countries and in countries in economical transition. This committee comprises three group of studies covering the following topics: natural gas in the less developed countries (environment protection, power production, institutional framework and cooperation), natural gas in countries in economical transition (situation in Eastern Europe, reforms and investments, prices and tariffs, towards the integration to the European Union), natural gas in developing countries (financing and technology transfers, down-side gas development, economical viability, technology transfers, projects financing, recommendations), inter-region development and power production (South America, Asia, role of the worldwide bank). (J.S.)

Water data to answer urgent water policy questions: Monitoring design, available data, and filling data gaps for determining whether shale gas development activities contaminate surface water or groundwater in the Susquehanna River Basin

Science.gov (United States)

Betanzo, Elin A.; Hagen, Erik R.; Wilson, John T.; Reckhow, Kenneth H.; Hayes, Laura; Argue, Denise M.; Cangelosi, Allegra A.

2016-01-01

Throughout its history, the United States has made major investments in assessing natural resources, such as soils, timber, oil and gas, and water. These investments allow policy makers, the private sector and the American public to make informed decisions about cultivating, harvesting or conserving these resources to maximize their value for public welfare, environmental conservation and the economy. As policy issues evolve, new priorities and challenges arise for natural resource assessment, and new approaches to monitoring are needed. For example, new technologies for oil and gas development or alternative energy sources may present new risks for water resources both above and below ground. There is a need to evaluate whether today’s water monitoring programs are generating the information needed to answer questions surrounding these new policy priorities. The Northeast-Midwest Institute (NEMWI), in cooperation with the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program, initiated this project to explore the types and amounts of water data needed to address water-quality related policy questions of critical concern to today’s policy makers and whether those data are currently available. The collaborating entities identified two urgent water policy questions and conducted case studies in the Northeast-Midwest region to determine the water data needed, water data available, and the best ways to fill the data gaps relative to those questions. This report details the output from one case study and focuses on the Susquehanna River Basin, a data-rich area expected to be a best-case scenario in terms of water data availability.

The floral hosts and distribution of a supposed creosote bush specialist, Colletes stepheni Timberlake (Hymenoptera: Colletidae)

Science.gov (United States)

Colletes stepheni Timberlake, previously thought to be a narrow oligolege of Larrea (creosote bush) of limited distribution in the Sonoran Desert, is found to be a much more widely distributed psammophile of the Sonoran, Mojave and Great Basin Deserts that utilizes two unrelated plant pollen sources...

Selection and specification criteria for fills for cut-and-fill mining

Energy Technology Data Exchange (ETDEWEB)

Thomas, E. G.

1980-05-15

Because of significant differences in placement and loading conditions, the ideal fill material for a cut-and-fill operation has different characteristics to those for a fill for a filled open stoping operation. The differing requirements of the two mining operations must be understood and accounted for in establishing fill selection and specification criteria. Within the paper, aspects of the particular requirements of cut-and-fill mining are analyzed and related to the specific fill tests and properties required. Emphasis is placed upon the role of fill in ground support, though this cannot be isolated from overall fill performance. Where appropriate, test data are introduced and areas requiring continuing research highlighted.

Technical Development Path for Gas Foil Bearings

Science.gov (United States)

Dellacorte, Christopher

2016-01-01

Foil gas bearings are in widespread commercial use in air cycle machines, turbocompressors and microturbine generators and are emerging in more challenging applications such as turbochargers, auxiliary power units and propulsion gas turbines. Though not well known, foil bearing technology is well over fifty years old. Recent technological developments indicate that their full potential has yet to be realized. This paper investigates the key technological developments that have characterized foil bearing advances. It is expected that a better understanding of foil gas bearing development path will aid in future development and progress towards more advanced applications.

Development of a wet gas flowmeter

Energy Technology Data Exchange (ETDEWEB)

Andreussi, P.; Ciandri, P.; Faluomi, V. [TRA Sistemi, Pisa (Italy)

2000-07-01

A new multiphase flowmeter, particularly suited for wet gas metering, has been developed. The meter working principle is the isokinetic sampling of the gas-liquid mixture, followed by separation and individual metering of the gas and the liquid phase. The liquid flowrate is derived from the value of the sampled liquid flowrate. The gas flowrate is measured with a multiphase nozzle. Preliminary tests have shown that both the gas and the liquid flowrates can be determined with an error less than 5%. The meter can be autocalibrated and allows the water-cut to be measured with any prescribed precision. (author)

Effects of aging on the structural, mechanical, and thermal properties of the silicone rubber current transformer insulation bushing for a 500 kV substation.

Science.gov (United States)

Wang, Zhigao; Zhang, Xinghai; Wang, Fangqiang; Lan, Xinsheng; Zhou, Yiqian

2016-01-01

In order to analyze the cracking and aging reason of the silicone rubber current transformer (CT) insulation bushing used for 8 years from a 500 kV alternating current substation, characteristics including Fourier transform infrared (FTIR) spectroscopy, mechanical properties analysis, hardness, and thermo gravimetric analysis have been carried out. The FTIR results indicated that the external surface of the silicone rubber CT insulation bushing suffered from more serious aging than the internal part, fracture of side chain Si-C bond was much more than the backbone. Mechanical properties and thermal stability results illustrated that the main aging reasons were the breakage of side chain Si-C bond and the excessive cross-linking reaction of the backbone. This study can provide valuable basis for evaluating degradation mechanism and aging state of the silicone rubber insulation bushing in electric power field.

Scaling laws for oxygen transport across the space-filling system of respiratory membranes in the human lung

Science.gov (United States)

Hou, Chen

Space-filling fractal surfaces play a fundamental role in how organisms function at various levels and in how structure determines function at different levels. In this thesis, we develop a quantitative theory of oxygen transport to and across the surface of the highly branched, space-filling system of alveoli, the fundamental gas exchange unit (acinar airways), in the human lung. Oxygen transport in the acinar airways is by diffusion, and we treat the two steps---diffusion through the branched airways, and transfer across the alveolar membranes---as a stationary diffusion-reaction problem, taking into account that there may be steep concentration gradients between the entrance and remote alveoli (screening). We develop a renormalization treatment of this screening effect and derive an analytic formula for the oxygen current across the cumulative alveolar membrane surface, modeled as a fractal, space-filling surface. The formula predicts the current from a minimum of morphological data of the acinus and appropriate values of the transport parameters, through a number of power laws (scaling laws). We find that the lung at rest operates near the borderline between partial screening and no screening; that it switches to no screening under exercise; and that the computed currents agree with measured values within experimental uncertainties. From an analysis of the computed current as a function of membrane permeability, we find that the space-filling structure of the gas exchanger is simultaneously optimal with respect to five criteria. The exchanger (i) generates a maximum oxygen current at minimum permeability; (ii) 'wastes' a minimum of surface area; (iii) maintains a minimum residence time of oxygen in the acinar airways; (iv) has a maximum fault tolerance to loss of permeability; and (v) generates a maximum current increase when switching from rest to exercise.

Using the Purdue University Public Affairs (C-SPAN) Video Archives in the Classroom To Study President George Bush and the Language of Aggression during the Persian Gulf War.

Science.gov (United States)

Schnell, Jim

This paper describes the methodology employed to study videotapes of presentations made by President George Bush during the crisis in the Persian Gulf. Analysis of President Bush's language in relation to the events of the Gulf War was undertaken. Videotapes were used because they allowed for analysis of nonverbal communication as well as verbal…

Political Struggle Over The Immigration Reform During G.W.Bush Presidency

Directory of Open Access Journals (Sweden)

Aleksandra Aleksandrovna Filippenko

2014-01-01

Full Text Available By the beginning of the XXI century, the US had about 12 million illegal aliens and the immigration reform was evidently much needed. The Immigration Act of 1990 was significantly outdated and required revision. Additional regulations that passed in the 1990-s had to be systematized. The White House and the president George W. Bush inclined to the comprehensive immigration reform that would include an amnesty for the certain part of the illegal aliens. Some lawmakers were ready to strike a deal, but than happened the 9/11 tragedy. Immigration reform was shelved and turned into a matter of national security. Immigration reform bills were taken into consideration only in conjunction with boarder security bills. Edward Kennedy was very much aware of the issue's complexity and the need for reform; he did all he could to reach a compromise with his fellow Republicans. John McCain became his closest ally in the reform. Democrats made considerable concessions, while moderate Republicans were willing to meet them halfway, but the conservatives would not let the Congress adopt a new legislation, calling any attempt at comprehensive immigration reform an amnesty for the criminals. During the 107-110 Congresses the immigration reform was thoroughly worked through from both sides, but the proposed bills rarely got to the floor and never passed both Houses. Even though the time has passed, suggestions offered and deals reached during the Bush presidency did not lose the edge and any new immigration legislation is going be based on the 2002-2008 bills.

POLITICAL STRUGGLE OVER THE IMMIGRATION REFORM DURING G.W.BUSH PRESIDENCY

Directory of Open Access Journals (Sweden)

Aleksandra Aleksandrovna Filippenko

2014-01-01

Full Text Available By the beginning of the XXI century, the US had about 12 million illegal aliens and the immigration reform was evidently much needed. The Immigration Act of 1990 was significantly outdated and required revision. Additional regulations that passed in the 1990-s had to be systematized. The White House and the president George W. Bush inclined to the comprehensive immigration reform that would include an amnesty for the certain part of the illegal aliens. Some lawmakers were ready to strike a deal, but than happened the 9/11 tragedy. Immigration reform was shelved and turned into a matter of national security. Immigration reform bills were taken into consideration only in conjunction with boarder security bills. Edward Kennedy was very much aware of the issue's complexity and the need for reform; he did all he could to reach a compromise with his fellow Republicans. John McCain became his closest ally in the reform. Democrats made considerable concessions, while moderate Republicans were willing to meet them halfway, but the conservatives would not let the Congress adopt a new legislation, calling any attempt at comprehensive immigration reform an amnesty for the criminals. During the 107-110 Congresses the immigration reform was thoroughly worked through from both sides, but the proposed bills rarely got to the floor and never passed both Houses. Even though the time has passed, suggestions offered and deals reached during the Bush presidency did not lose the edge and any new immigration legislation is going be based on the 2002-2008 bills.

The cyclotron gas stopper project at the NSCL

Energy Technology Data Exchange (ETDEWEB)

Guenaut, C., E-mail: guenaut@nscl.msu.edu; Bollen, G.; Chouhan, S.; Marti, F.; Morrissey, D. J.; Lawton, D.; Ottarson, J.; Pang, G. K.; Schwarz, S.; Sherrill, B. M. [Michigan State University (United States); Wada, M. [RIKEN (Japan); Zeller, A. F. [Michigan State University (United States)

2006-11-15

Gas stopping is becoming the method of choice for converting beams of rare isotopes obtained via projectile fragmentation and in-flight separation into low-energy beams. These beams allow ISOL-type experiments, such as mass measurements with traps or laser spectroscopy, to be performed with projectile fragmentation products. Current gas stopper systems for high-energy beams are based on linear gas cells filled with 0.1-1 bar of helium. While already used successfully for experiments, it was found that space charge effects induced by the ionization of the helium atoms during the stopping process pose a limit on the maximum beam rate that can be used. Furthermore, the extraction time of stopped ions from these devices can exceed 100 ms causing substantial decay losses for very short-lived isotopes. To avoid these limitations, a new type of gas stopper is being developed at the NSCL/MSU. The new system is based on a cyclotron-type magnet with a stopping chamber filled with Helium buffer gas at low pressure. RF-guiding techniques are used to extract the ions. The space charge effects are considerably reduced by the large volume and due to a separation between the stopping region and the region of highest ionization. Cyclotron gas stopper systems of different sizes and with different magnetic field strengths and field shapes are presently investigated.

The cyclotron gas stopper project at the NSCL

International Nuclear Information System (INIS)

Guenaut, C.; Bollen, G.; Chouhan, S.; Marti, F.; Morrissey, D. J.; Lawton, D.; Ottarson, J.; Pang, G. K.; Schwarz, S.; Sherrill, B. M.; Wada, M.; Zeller, A. F.

2006-01-01

Gas stopping is becoming the method of choice for converting beams of rare isotopes obtained via projectile fragmentation and in-flight separation into low-energy beams. These beams allow ISOL-type experiments, such as mass measurements with traps or laser spectroscopy, to be performed with projectile fragmentation products. Current gas stopper systems for high-energy beams are based on linear gas cells filled with 0.1-1 bar of helium. While already used successfully for experiments, it was found that space charge effects induced by the ionization of the helium atoms during the stopping process pose a limit on the maximum beam rate that can be used. Furthermore, the extraction time of stopped ions from these devices can exceed 100 ms causing substantial decay losses for very short-lived isotopes. To avoid these limitations, a new type of gas stopper is being developed at the NSCL/MSU. The new system is based on a cyclotron-type magnet with a stopping chamber filled with Helium buffer gas at low pressure. RF-guiding techniques are used to extract the ions. The space charge effects are considerably reduced by the large volume and due to a separation between the stopping region and the region of highest ionization. Cyclotron gas stopper systems of different sizes and with different magnetic field strengths and field shapes are presently investigated.

Transmissibility of Leishmania infantum from maned wolves (Chrysocyon brachyurus) and bush dogs (Speothos venaticus) to Lutzomyia longipalpis.

Science.gov (United States)

Mol, Juliana P S; Soave, Semíramis A; Turchetti, Andréia P; Pinheiro, Guilherme R G; Pessanha, Angela T; Malta, Marcelo C C; Tinoco, Herlandes P; Figueiredo, Luiza A; Gontijo, Nelder F; Paixão, Tatiane A; Fujiwara, Ricardo T; Santos, Renato L

2015-09-15

Leishmania (Leishmania) infantum is the cause of visceral leishmaniasis in the Americas. The disease is transmitted mostly through the bite of the invertebrate vector, the phlebotomine Lutzomyia longipalpis in the New World. Although the domestic dog is considered the most important reservoir of the disease, other mammalian, including wildlife, are susceptible to infection. The goal of this study was to perform xenodiagnosis to evaluate the capacity of naturally infected maned wolves (Chrysocyon brachyurus) and bush dogs (Speothos venaticus) to transmit Leishmania infantum to female sand flies (L. longipalpis). Xenodiagnoses were performed in February and August, 2013, when 77.7% (three maned wolves and four bush dogs) or 100% of the animals were positive, respectively. However, parasite loads in the engorged sand flies was low (longipalpis, although the parasite loads in engorged phlebotomines exposed to these animals were very low. Copyright © 2015 Elsevier B.V. All rights reserved.

Market development in the natural gas market

International Nuclear Information System (INIS)

Kuenneke, R.W.; Arentsen, M.J.; Manders, A.M.P.; Plettenburg, L.A.

1998-01-01

Options for the liberalization of the Dutch natural gas market have been investigated. Three models are compared and assessed for the impacts on the economic performance, the national interests and the so-called public tasks. The results of the report can be used to base the proposals for a new Natural Gas Act, which is expected to be sent to the Dutch parliament in the spring of 1999. The three liberalization models are specified according to the different phases in the industrial column of natural gas. Except for transport (limited possibilities) and distribution (monopolistic character and thus not suitable for market development), market development is possible in all the phases of the column. The models are the cooperation model (equal position for the natural gas trade company Gasunie and the natural gas distribution companies, and management of the natural gas infrastructure and the Dutch gas reserves by means of mutual tuning, cooperation and coordination), the EZ-model (price mechanism for the tariffs for natural gas, and access to the natural gas network through negotiated third party access (TPA) with indicative prices and conditions), and the market model (optimal use of market development options to stimulate the economic performance, introduction of price mechanism options, access through regulated TPA with tariffs, based on long-term marginal costs, role of the government limited to a favorable policy with respect to access to the network, competition and security of the interests which arise from the exploitation of the Dutch natural gas fields). 26 refs

Technical development in the city gas business

Energy Technology Data Exchange (ETDEWEB)

Kondo, Takehiko

1988-07-01

This paper reports on technical developments in the city gas business. Energy demand is expected to increase by only 1.3 over the 1986 to 1995 period. Also, the importance of complex energy is increasing. As a result, limited demand entails more violent competition among various energy industries (electricity, gas, oil, etc.). Such trend is calling for a new system that flexibly meets the needs of the present society. Household-purpose city gas accounts for more than 90% of all the city gas. One of the means to increase city gas demand is to encourage people to use gas-type room heating/cooling systems to enrich citizen life and ease difficulties during the power-consumption peak period. Anothe important factor is to develop a system, such as a cogeneration system, that flexibly applies to heat and electricity balance. Pipeline construction and maintenance costs account for most of the gas-related costs. One of the attempts to reduce such costs is the development of a small-section or non-digging pipe-laying technique and a diagnostic robot. Large computers are already in use in total information management. To ensure security, people concerned have made much progress in upgrading the performance of and spreading sensors for carbon monoxide and other gases. To eliminate all accidents, they have also developed an automatic cut-off method in case of an abnormal efflux. This method is expected to spread in the future. They have also developed an LNG cold heat utilization technique and a by-product carbon fiber. (2 figs)

Development and Substantiation of Parameters of Environmentally Friendly Technology for Filling the Vertical Mine Workings with Autoclaved Slag-Concrete

Directory of Open Access Journals (Sweden)

Uglyanitca Andrey

2017-01-01

Full Text Available The environmentally friendly technology for filling the vertical mine workings with autoclaved slag-concrete, prefabricated on the surface of the mine is presented in the article; the optimal parameters of filling technology are proposed. The developed technology for filling the abandoned vertical mine workings allows ensuring the environmental safety of the territories adjacent to the abandoned mine, utilizing slag dumps and providing the possibility of shaft recovery, if necessary, with minimal labor and material costs.

Development of the CD Symcap platform to study gas-shell mix in implosions at the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Casey, D. T.; Smalyuk, V. A.; Tipton, R. E.; Pino, J. E.; Remington, B. A.; Rowley, D. P.; Weber, S. V.; Barrios, M.; Benedetti, L. R.; Bleuel, D. L.; Bond, E. J.; Bradley, D. K.; Caggiano, J. A.; Callahan, D. A.; Cerjan, C. J.; Edwards, M. J.; Fittinghoff, D.; Glenn, S.; Haan, S. W.; Hamza, A. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); and others

2014-09-15

Surrogate implosions play an important role at the National Ignition Facility (NIF) for isolating aspects of the complex physical processes associated with fully integrated ignition experiments. The newly developed CD Symcap platform has been designed to study gas-shell mix in indirectly driven, pure T{sub 2}-gas filled CH-shell implosions equipped with 4 μm thick CD layers. This configuration provides a direct nuclear signature of mix as the DT yield (above a characterized D contamination background) is produced by D from the CD layer in the shell, mixing into the T-gas core. The CD layer can be placed at different locations within the CH shell to probe the depth and extent of mix. CD layers placed flush with the gas-shell interface and recessed up to 8 μm have shown that most of the mix occurs at the inner-shell surface. In addition, time-gated x-ray images of the hotspot show large brightly radiating objects traversing through the hotspot around bang-time, which are likely chunks of CH/CD plastic. This platform is a powerful new capability at the NIF for understanding mix, one of the key performance issues for ignition experiments.

Radiopacity of root filling materials

International Nuclear Information System (INIS)

Beyer-Olsen, E.M.

1983-01-01

A method for measuring the radiopacity of root filling materials is described. Direct measurements were made of the optic density values of the materials in comparison with a standard curve relating optic density to the thickness of an aluminium step wedge exposed simultaneously. By proper selection of film and conditions for exposure and development, it was possible to obtain a near-linear standard curve which added to the safety and reproducibility of the method. The technique of radiographic assessment was modified from clinical procedures in evaluating the obturation in radiographs, and it was aimed at detecting slits or voids between the dental wall and the filling material. This radiographic assessment of potensial leakage was compared with actual in vitro lekage of dye (basic fuchsin) into the roots of filled teeth. The result of the investigation show that root filling materials display a very wide range of radiopacity, from less than 3 mm to more than 12 mm of aluminium. It also seem that tooth roots that appear to be well obturated by radiographic evaluation, stand a good chance of beeing resistant to leakage in vitro, and that the type of filling material rather than its radiographic appearance, determines the susceptibility of the filled tooth to leakage in vitro. As an appendix the report contains a survey of radiopaque additives in root filling materials

Grain filling, starch degradation and feeding value of maize for ruminants

NARCIS (Netherlands)

Ali, M.

2013-01-01

Keywords; Maize (Zea mays L), Genotypes, Grain filling, Growth temperature, Kernels, Gas production, Starch degradation, Oven-drying, Silage, Ensiling temperature, Ensiling duration, Feeding value, Lactating cows

Maize (Zea mays L.) is a major component in the ration of dairy cows in

Novel concept for neutron detection: proportional counter filled with 10B nanoparticle aerosol

Science.gov (United States)

Amaro, F. D.; Monteiro, C. M. B.; dos Santos, J. M. F.; Antognini, A.

2017-01-01

The high neutron detection efficiency, good gamma-ray discrimination and non-toxicity of 3He made of proportional counters filled with this gas the obvious choice for neutron detection, particularly in radiation portal monitors (RPM), used to control the illicit transport of nuclear material, of which neutron detectors are key components. 3He is very rare and during the last decade this gas has become increasingly difficult to acquire. With the exception of BF3, which is toxic, no other gas can be used for neutron detection in proportional counters. We present an alternative where the 3He atoms are replaced by nanoparticles made of another neutron sensitive material, 10B. The particles are dispersed in a gaseous volume, forming an aerosol with neutron sensitive properties. A proportional counter filled with such aerosol was exposed to a thermal neutron beam and the recorded response indicates that the neutrons have interacted with the particles in the aerosol. This original technique, which transforms a standard proportional gas mixture into a neutron sensitive aerosol, is a breakthrough in the field of radiation detection and has the potential to become an alternative to the use of 3He in proportional counters. PMID:28181520

FINITE-ELEMENT MODELING OF HOT FORMING OF BUSHES MADE FROM HIGH-STRENGTH CAST IRON WITH A GRADIENT DISTRIBUTION OF GRAPHITE INCLUSIONS OVER CROSS-SECTION

Directory of Open Access Journals (Sweden)

A. I. Pokrovsky

2016-01-01

Full Text Available Imitation modeling of direct hot extrusion of bushes made from high-strength cast iron is performed using finite-element method. The evolution of stress and strain fields during processing and the probability of crack formation are evaluated. The specific feature of the work is that during hot forming a special technique was used which permitted obtaining a gradient distribution of graphite inclusions over the cross-section of bushes. The results of modeling are used in certain technologies which are implemented in industrial practice.

Natural gas outlook

International Nuclear Information System (INIS)

Molyneaux, M.P.

1998-01-01

An overview of natural gas markets in Canada and in the United States was provided. The major factors that determine the direction of natural gas prices were depicted graphically. Price volatility has decreased in recent months. As expected, April through November total energy consumption reached historically high levels. Demand for natural gas during the summer of 1997 was not as strong as anticipated. Nuclear energy appears to be on the slippery slope, with natural gas-driven electricity projects to fill the void. Hydroelectricity had a strong showing in 1997. Prospects are less bright for 1998 due to above average temperatures. Canadian natural gas export capacity has increased 5.5 times between 1986 and estimated 1999 levels. Despite this, in 1997, deliveries to the United States were marginally behind expectations. Natural gas consumption, comparative fuel prices, natural gas drilling activity, natural gas storage capacity, actual storage by region, and average weekly spot natural gas prices, for both the U. S. and Canada, were also provided. With regard to Canada, it was suggested that Canadian producers are well positioned for a significant increase in their price realization mostly because of the increase in Canada's export capacity in 1997 (+175 Mmcf/d), 1998 (1,060 Mmcf/d) and potentially in 1999 or 2000, via the Alliance Pipeline project. Nevertheless, with current production projections it appears next to impossible to fill the 10.9 Bcf/d of export capacity that will be potentially in place by the end of 1999. tabs., figs

Gas-partitioning tracer test to qualify trapped gas during recharge

Science.gov (United States)

Heilweil, Victor M.; Kip, Solomon D.; Perkins, Kim S.; Ellett, Kevin M.

2004-01-01

Dissolved helium and bromide tracers were used to evaluate trapped gas during an infiltration pond experiment. Dissolved helium preferentially partitioned into trapped gas bubbles, or other pore air, because of its low solubility in water. This produced observed helium retardation factors of as much as 12 relative to bromide. Numerical simulations of helium breakthrough with both equilibrium and kinetically limited advection/dispersion/retardation did not match observed helium concentrations. However, better fits were obtained by including a decay term representing the diffusive loss of helium through interconnected, gas-filled pores. Calculations indicate that 7% to more than 26% of the porosity beneath the pond was filled with gas. Measurements of laboratory hydraulic properties indicate that a 10% decrease in saturation would reduce the hydraulic conductivity by at least one order of magnitude in the well-sorted sandstone, but less in the overlying soils. This is consistent with in situ measurements during the experiment, which show steeper hydraulic gradients in sandstone than in soil. Intrinsic permeability of the soil doubled during the first six months of the experiment, likely caused by a combination of dissolution and thermal contraction of trapped gas. Managers of artificial recharge basins may consider minimizing the amount of trapped gas by using wet, rather than dry, tilling to optimize infiltration rates, particularly in well-sorted porous media in which reintroduced trapped gas may cause substantial reductions in permeability. Trapped gas may also inhibit the amount of focused infiltration that occurs naturally during ephemeral flood events along washes and playas.

Gas-partitioning tracer test to quantify trapped gas during recharge

Science.gov (United States)

Heilweil, V.M.; Solomon, D.K.; Perkins, K.S.; Ellett, K.M.

2004-01-01

Dissolved helium and bromide tracers were used to evaluate trapped gas during an infiltration pond experiment. Dissolved helium preferentially partitioned into trapped gas bubbles, or other pore air, because of its low solubility in water. This produced observed helium retardation factors of as much as 12 relative to bromide. Numerical simulations of helium breakthrough with both equilibrium and kinetically limited advection/dispersion/retardation did not match observed helium concentrations. However, better fits were obtained by including a decay term representing the diffusive loss of helium through interconnected, gas-filled pores. Calculations indicate that 7% to more than 26% of the porosity beneath the pond was filled with gas. Measurements of laboratory hydraulic properties indicate that a 10% decrease in saturation would reduce the hydraulic conductivity by at least one order of magnitude in the well-sorted sandstone, but less in the overlying soils. This is consistent with in situ measurements during the experiment, which show steeper hydraulic gradients in sandstone than in soil. Intrinsic permeability of the soil doubled during the first six months of the experiment, likely caused by a combination of dissolution and thermal contraction of trapped gas. Managers of artificial recharge basins may consider minimizing the amount of trapped gas by using wet, rather than dry, tilling to optimize infiltration rates, particularly in well-sorted porous media in which reintroduced trapped gas may cause substantial reductions in permeability. Trapped gas may also inhibit the amount of focused infiltration that occurs naturally during ephemeral flood events along washes and playas.

Natural Gas Reserves, Development and Production in Qatar

International Nuclear Information System (INIS)

Naji, Abi-Aad.

1998-01-01

Qatar entered the club of natural gas exporters in early 1997 when the first shipment of liquefied natural gas left the state for Japan. Qatar was helped by the discovery in 1971 of supergiant North Field gas field, the country's suitable location between the established gas consuming markets in Europe and Southeast Asia, and its proximity to developing markets in the Indian subcontinent and in neighbouring countries. All that have combined to make gas export projects from Qatar economically viable and commercially attractive. In addition to export-oriented development, increased gas production from the North Field is planned for meeting a growing domestic demand for gas as fuel and feedstock for power generation and desalination plants, as well as value-added petrochemical and fertilizer industries

Gas-cooled nuclear reactor with a filling of spherical fuel elements

International Nuclear Information System (INIS)

Hantke, H.J.

1978-01-01

In order to protect the reflector blanket of a pebble bed reactor against radiation damage a filling of graphite spheres is arranged between blanket and fuel elements, having got a smaller diameter than fuel spheres. Before reaching unduely high irradiation values caused by fast neutrons these graphite spheres are removed from the core, together with the usual discharge of spheres, and replaced by new spheres. (TK) [de

Eastern Canada natural gas developments

International Nuclear Information System (INIS)

Wall, A.

2001-01-01

This power point presentation addressed the following topics regarding development of natural gas in eastern Canada: (1) the 18 Tcf of proven natural gas reserves at Sable Island, (2) Canadian markets benefiting from the Maritimes and Northeast Pipeline (M and NP), (3) a 20 year franchise agreement between Enbridge Gas and the government of New Brunswick, (4) the 25 year provincial franchise agreement by Sempra Atlantic Gas, and (5) Sable Island's influence on central Canada. The Sable Offshore Energy Project (SOEP) is now producing about 540,000 MMBtu/day from 6 fields. Plans for Tier 2 expansion are underway. Firm contracts for the M and NP are scheduled to transport gas from the SOEP to markets in Nova Scotia, New Brunswick, Maine and New Hampshire. Sable gas is also a potential supply for the Quebec market. Gaz Metropolitain and Enbridge have proposed to build the Cartier Pipeline from the Quebec/New Brunswick border to Quebec City. It is unlikely that Sable Island supply will directly serve the Ontario market. Canadian customers for Sable gas and M and NP service include pulp and paper companies, oil refineries, power generators and local distribution companies (LDC), with the majority of demand coming form the electric power industry. tabs., figs

Studies of implosion dynamics of D{sup 3}He gas-filled plastic targets using nuclear diagnostics at OMEGA

Energy Technology Data Exchange (ETDEWEB)

Falk, Magnus

2004-09-01

Information about target-implosion dynamics is essential for understanding how assembly occurs. Without carefully tailored assembly of the fuel, hot-spot ignition on National Ignition Facility (NIF) will fail. Hot spot ignition relies on shock convergence to 'ignite' the hot spot (shock burn), followed by propagation of the burn into the compressed shell material (compressive burn). The relationship between these events must be understood to ensure the success of Inertial Confinement Fusion (ICF) ignition. To further improve our knowledge about the timing of these events, temporal evolution of areal density (density times radius, normally referred to as {rho}R) and burn of direct-drive, D{sup 3}He gas-filled plastic target implosions have been studied using dd neutrons and d{sup 3}He protons. The proton temporal diagnostic (PTD) code was developed for this purpose. {rho}R asymmetries were observed at shock-bang time (time of peak burn during shock phase) and grew approximately twice as fast as the average {rho}R, without any phase changes. Furthermore, it was observed that the shock-bang and compression-bang time occur earlier, and that the time difference between these events decreases for higher laser energy on target, which indicates that the compression-bang time is more sensitive to the variation of laser energy on target. It was also observed that the duration of shock and compression phase might decrease for higher laser energy on target.

Economic impact analysis of natural gas development and the policy implications

International Nuclear Information System (INIS)

De Silva, P.N.K.; Simons, S.J.R.; Stevens, P.

2016-01-01

In the US, the shale gas revolution ensured that the development costs of unconventional natural gas plummeted to the levels of $2–3/Mcf. This success has motivated the development of shale gas in other regions, including Australia and Europe. This study, focussing primarily on aspects of economic impact analysis, estimates the development costs of shale gas extraction in both Australia and Europe, based on both direct and fiscal costs, and also suggests policy initiatives. The increasing liquefied natural gas (LNG) developments in Australia are already straining domestic gas supplies. Hence, the development of more natural gas resources has been given a high priority. However, a majority of the Australian shale resources is non-marine in origin and significantly different to the marine-type shales in the US. In addition, the challenges of high development costs and the lack of infrastructure, service capacity and effective government policy are inhibiting shale gas development. Increasing the attractiveness of low risk investment by new, local, developers is critical for Australian shale gas success, which will simultaneously increase domestic gas security. In the European context, unconventional gas development will be challenged by direct, rather than fiscal costs. High direct costs will translate into average overall gas development costs over $13/Mcf, which is well over the existing market price. - Highlights: • The shale gas development potential of US, Europe and Australia are compared. • An economic impact analysis of shale gas development in Europe and Australia. • Factors important for shale gas development are discussed. • Policy pathways are suggested for shale gas development

Natural gas developments in Latin America

International Nuclear Information System (INIS)

Faith, P.L.

1996-01-01

Natural gas opportunities in Latin America are discussed with reference to the Bolivia to Brazil Gas Pipeline Project. This fully integrated natural gas project extends from reserves development to market consumption and involves cooperation between countries and between the public and private sector. The project's success will depend, it is argued on the thorough integration and cooperation of all stages from reserve exploration, through pipeline construction, and distribution to power generation. (UK)

Numerical Analysis of the Pressure Drop on a Flow Channel Filled with Catalysts for Nuclear Hydrogen Production System

Energy Technology Data Exchange (ETDEWEB)

Hong, Sung Deok; Kim, C. S.; Kim, M. H.; Kim, Y. W. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Seo, D. U.; Park, G. C. [Seoul National Univ., Seoul (Korea, Republic of)

2013-10-15

Designing a process heat exchanger (PHE) is one of the main technical challenges in the development of a nuclear hydrogen production system. The PHE provides an interface between the helium gas and the sulfuric acid gas. The SO3 gas is heated and decomposed into SO2 and O2 in the PHE. For this reason, PHE is also called a sulfur trioxide decomposer. The Korea Atomic Energy Research Institute (KAERI) has developed a hybrid-design decomposer to withstand severe operating conditions. Figure 1 shows the layout of the PHE which has a hybrid form of its flow channel geometry; there is a printed-circuit form on the primary helium side and a plate-fin form on the secondary SO3 side. There are many widespread correlations for the porous media such as the Carman, Ergun, Zhavoronkov et al., Susskind and Becker and Reichelt correlation. In the nuclear field, the KTA correlation was developed for a reactor core design for a high-temperature gas-cooled reactor. In this paper, we discussed a numerical analysis and validation of a pressure drop on a SO3 flow channel filled with various sized catalysts. We discussed a numerical analysis and validation of a pressure drop on a flow channel filled with catalysts in the channel. The results of the pressure drop simulation are compared with the results obtained using well-known empirical correlations. From the comparison results, the validity of the two-dimensional numerical analysis is not shown. The main reason may be due to a discord of the channel geometry and the extreme irregularity in the size of the catalyst. It should be accomplished by comparing its results with the experimental data, yet there are no experimental data available up to now.

Suggestions on the development strategy of shale gas in China

Directory of Open Access Journals (Sweden)

Dazhong Dong

2016-12-01

Full Text Available From the aspects of shale gas resource condition, main exploration and development progress, important breakthrough in key technologies and equipment, this paper systematically summarized and analyzed current situation of shale gas development in China and pointed out five big challenges such as misunderstandings, lower implementation degree and higher economic uncertainty of shale gas resource, and still no breakthrough in exploration and development core technologies and equipment for shale gas buried depth more than 3500 m, higher cost and other non-technical factors that restrict the development pace. Aiming at the above challenges, we put forward five suggestions to promote the shale gas development in China: (1 Make strategies and set goals according to our national conditions and exploration and development stages. That is, make sure to realize shale gas annual production of 20 × 109 m3, and strives to reach 30 × 109 m3. (2 Attach importance to the research of accumulation and enrichment geological theory and exploration & development key engineering technologies for lower production and lower pressure marine shale gas reservoir, and at the same time orderly promote the construction of non-marine shale gas exploration & development demonstration areas. (3 The government should introduce further policies and set special innovation funds to support the companies to carry out research and development of related technologies and equipment, especially to strengthen the research and development of technology, equipment and process for shale gas bellow 3500 m in order to achieve breakthrough in deep shale gas. (4 Continue to promote the geological theory, innovation in technology and management, and strengthen cost control on drilling, fracturing and the whole process in order to realize efficient, economic and scale development of China's shale gas. (5 Reform the mining rights management system, establish information platform of shale

Effects of high fire frequency in creosote bush scrub vegetation of the Mojave Desert

Science.gov (United States)

Brooks, M.L.

2012-01-01

Plant invasions can increase fire frequency in desert ecosystems where fires were historically infrequent. Although there are many resource management concerns associated with high frequency fire in deserts, fundamental effects on plant community characteristics remain largely unstudied. Here I describe the effects of fire frequency on creosote bush scrub vegetation in the Mojave Desert, USA. Biomass of the invasive annual grass Bromus rubens L. increased following fire, but did not increase further with additional fires. In contrast, density, cover and species richness of native perennial plants each decreased following fire and continued to decrease with subsequent fires, although not as dramatically as after the initial fire. Responses were similar 5 and 14 years post-fire, except that cover of Hymenoclea salsola Torr. & A. Gray and Achnatherum speciosa Trin. & Rupr. both increased in areas burnt once. These results suggest that control of B. rubens may be equally warranted after one, two or three fires, but revegetation of native perennial plants is most warranted following multiple fires. These results are valid within the scope of this study, which is defined as relatively short term vegetation responses (???14 years) to short fire return intervals (6.3 and 7.3 years for the two and three fire frequency levels) within creosote bush scrub of the Mojave Desert. ?? 2012 IAWF.

European gas market developments. Opportunities and threats

International Nuclear Information System (INIS)

Van Oostvoorn, F.

1998-09-01

The paper is based on two studies conducted by ECN, namely a study entitled 'An analysis of the West-European gas market: a company approach' and another entitled 'Developments of gas markets across Europe' to be published in November 1998. The paper addresses the past driving factors responsible for the increasing share of gas in the EU energy demand. Furthermore it very briefly discusses the rising dependency of the European Union (EU) on gas imports from non-EU sources such as Russia and the expected gas-to-gas competition in a large number of EU countries in the next decades. 25 refs

Gas in Galaxies

OpenAIRE

Bland-Hawthorn, J.; Reynolds, R. J.

2000-01-01

The interstellar medium (ISM) can be thought of as the galactic atmosphere which fills the space between stars. When clouds within the ISM collapse, stars are born. When the stars die, they return their matter to the surrounding gas. Therefore the ISM plays a vital role in galactic evolution. The medium includes starlight, gas, dust, planets, comets, asteroids, fast moving charged particles (cosmic rays) and magnetic fields. The gas can be further divided into hot, warm and cold components, e...

Accelerated Biofluid Filling in Complex Microfluidic Networks by Vacuum-Pressure Accelerated Movement (V-PAM).

Science.gov (United States)

Yu, Zeta Tak For; Cheung, Mei Ki; Liu, Shirley Xiaosu; Fu, Jianping

2016-09-01

Rapid fluid transport and exchange are critical operations involved in many microfluidic applications. However, conventional mechanisms used for driving fluid transport in microfluidics, such as micropumping and high pressure, can be inaccurate and difficult for implementation for integrated microfluidics containing control components and closed compartments. Here, a technology has been developed termed Vacuum-Pressure Accelerated Movement (V-PAM) capable of significantly enhancing biofluid transport in complex microfluidic environments containing dead-end channels and closed chambers. Operation of the V-PAM entails a pressurized fluid loading into microfluidic channels where gas confined inside can rapidly be dissipated through permeation through a thin, gas-permeable membrane sandwiched between microfluidic channels and a network of vacuum channels. Effects of different structural and operational parameters of the V-PAM for promoting fluid filling in microfluidic environments have been studied systematically. This work further demonstrates the applicability of V-PAM for rapid filling of temperature-sensitive hydrogels and unprocessed whole blood into complex irregular microfluidic networks such as microfluidic leaf venation patterns and blood circulatory systems. Together, the V-PAM technology provides a promising generic microfluidic tool for advanced fluid control and transport in integrated microfluidics for different microfluidic diagnosis, organs-on-chips, and biomimetic studies. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Natural gas as an automotive fuel

Energy Technology Data Exchange (ETDEWEB)

Gritsenko, A I; Vasiliev, Y N; Jankiewicz, A [VPO ' Soyuzgastekhnologiya' All-Union Scientific Research Inst. of Natural gases (VNIIGAS) (SU)

1990-02-01

The review presented covers mass production of gas-petrol and gas-diesel automobiles in the USSR, second generation auto gas filling compressor stations, principal exhaust toxicants, and tests indicating natural gas fired autos emit >5 times less NO{sub x} and 10 times less hydrocarbons excluding methane. The switch over to gas as auto fuel and ensuing release of petrol and diesel for other uses are discussed. (UK).

Markets slow to develop for Niger delta gas reserves

International Nuclear Information System (INIS)

Thomas, D.

1995-01-01

Nigeria produces a very high quality, light, sweet crude oil but with a large percentage of associated gas derived from a high gas-to-oil ratio. Official proved gas reserves, both associated and nonassociated, are 120 tcf. Proved and probable reserves are estimated as high as 300 tcf. The internal market for gas has only begun to develop since the 1980s, and as a result approximately 77% of associated gas production is flared. Domestic gas consumption is currently approximately 700 MMcfd and is projected to have a medium term potential of 1.450 bcfd. The article discusses resource development, gas markets, gas flaring, gas use programs, the Bonny LNG scheme, the gas reserve base, LNG project status, competition, and energy opportunities

Hydromagnetic Rayleigh endash Taylor instability in high-velocity gas-puff implosions

International Nuclear Information System (INIS)

Roderick, N.F.; Peterkin, R.E. Jr.; Hussey, T.W.; Spielman, R.B.; Douglas, M.R.; Deeney, C.

1998-01-01

Experiments using the Saturn pulsed power generator have produced high-velocity z-pinch plasma implosions with velocities over 100 cm/μs using both annular and uniform-fill gas injection initial conditions. Both types of implosion show evidence of the hydromagnetic Rayleigh endash Taylor instability with the uniform-fill plasmas producing a more spatially uniform pinch. Two-dimensional magnetohydrodynamic simulations including unsteady flow of gas from a nozzle into the diode region have been used to investigate these implosions. The instability develops from the nonuniform gas flow field that forms as the gas expands from the injection nozzle. Instability growth is limited to the narrow unstable region of the current sheath. For the annular puff the unstable region breaks through the inner edge of the annulus increasing nonlinear growth as mass ejected from the bubble regions is not replenished by accretion. This higher growth leads to bubble thinning and disruption producing greater nonuniformity at pinch for the annular puff. The uniform puff provides gas to replenish bubble mass loss until just before pinch resulting in less bubble thinning and a more uniform pinch. copyright 1998 American Institute of Physics

Active vibration reduction of rigid rotor by kinematic excitation of bushes of journal bearings

Directory of Open Access Journals (Sweden)

J. Ondrouch

2010-04-01

Full Text Available Possibilities of active lateral vibration reduction of a symmetric, rigid rotor supported by journal bearings are given. They were obtained by computational modelling. Efficiency of the feedback P and PD controllers in the stable revolution interval was examined. The linearized rotor system model was used. The results of the theoretical analysis are assigned for a testing stand where the bearing bush motions are deactivated by piezoelectric actuators connected to the controllers.

Laser frequency standards based on gas-filled hollow-core fibres

DEFF Research Database (Denmark)

Triches, Marco

The work presented in this thesis has been developed within the Marie-Curie Initial Training Network (ITN) called Quantum Sensor Technologies and Applications (QTea), funded under the EU-FP7 program (contract-N MCITN-317485). The ITN QTea project is aimed at preparing a cohort of early-stage rese......The work presented in this thesis has been developed within the Marie-Curie Initial Training Network (ITN) called Quantum Sensor Technologies and Applications (QTea), funded under the EU-FP7 program (contract-N MCITN-317485). The ITN QTea project is aimed at preparing a cohort of early......-stage researchers for the emerging challenges in quantum technology. The scientific scope of the network is focused on the physics of modern quantum sensors for gravitational probing, rotation sensing, field probes, magnetic surface microscopy,atomic clocks and precision spectroscopy. This work naturally falls...... realization of a portable system and on the theoretical identification of the most important parameters for in-fiber gas spectroscopy applications. The scope of the project is to reduce the gap that prevents the state of the art technology from being commercialized. This thesis aims at: (a) characterizing...

Soviet Union: priority development of gas industry forecast

International Nuclear Information System (INIS)

Chernomyrdyn, V.S.

1991-01-01

The development of gas production and utilization in the Soviet Union is outlined, and the substantial contribution of the gas industry in restraining negative processes in the economy during the transition to a market economy is highlighted. The state owned Gazprom concern which is responsible for gas supply, the large ringed Integrated Gas Supply Systems, exports, underground gas storage, potential reserves, and the growth in gas productions are discussed. (UK)

Rheology of Emulsion-Filled Gels Applied to the Development of Food Materials

Directory of Open Access Journals (Sweden)

Ivana M. Geremias-Andrade

2016-08-01

Full Text Available Emulsion-filled gels are classified as soft solid materials and are complex colloids formed by matrices of polymeric gels into which emulsion droplets are incorporated. Several structural aspects of these gels have been studied in the past few years, including their applications in food, which is the focus of this review. Knowledge of the rheological behavior of emulsion-filled gels is extremely important because it can measure interferences promoted by droplets or particle inclusion on the textural properties of the gelled systems. Dynamic oscillatory tests, more specifically, small amplitude oscillatory shear, creep-recovery tests, and large deformation experiments, are discussed in this review as techniques present in the literature to characterize rheological behavior of emulsion-filled gels. Moreover, the correlation of mechanical properties with sensory aspects of emulsion-filled gels appearing in recent studies is discussed, demonstrating the applicability of these parameters in understanding mastication processes.

Livelihoods, economic contribution and sustainability of the bush mango (Irvingia gabonensis) value chain from three provinces of Gabon

NARCIS (Netherlands)

Iponga, D.M.; Yobo, C.M.; Ingram, V.J.; Bengone, N.N.; Ngoye, A.

2018-01-01

In the Congo Basin, the economic, social and environmental value of non-timber forest products (NTFPs), such as bush mango (Irvingia gabonensis) is widely acknowledged. However, knowledge of the volumes traded, extent and distribution of revenues along the value chain is limited while little is

Measurements of an ablator-gas atomic mix in indirectly driven implosions at the National Ignition Facility.

Science.gov (United States)

Smalyuk, V A; Tipton, R E; Pino, J E; Casey, D T; Grim, G P; Remington, B A; Rowley, D P; Weber, S V; Barrios, M; Benedetti, L R; Bleuel, D L; Bradley, D K; Caggiano, J A; Callahan, D A; Cerjan, C J; Clark, D S; Edgell, D H; Edwards, M J; Frenje, J A; Gatu-Johnson, M; Glebov, V Y; Glenn, S; Haan, S W; Hamza, A; Hatarik, R; Hsing, W W; Izumi, N; Khan, S; Kilkenny, J D; Kline, J; Knauer, J; Landen, O L; Ma, T; McNaney, J M; Mintz, M; Moore, A; Nikroo, A; Pak, A; Parham, T; Petrasso, R; Sayre, D B; Schneider, M B; Tommasini, R; Town, R P; Widmann, K; Wilson, D C; Yeamans, C B

2014-01-17

We present the first results from an experimental campaign to measure the atomic ablator-gas mix in the deceleration phase of gas-filled capsule implosions on the National Ignition Facility. Plastic capsules containing CD layers were filled with tritium gas; as the reactants are initially separated, DT fusion yield provides a direct measure of the atomic mix of ablator into the hot spot gas. Capsules were imploded with x rays generated in hohlraums with peak radiation temperatures of ∼294  eV. While the TT fusion reaction probes conditions in the central part (core) of the implosion hot spot, the DT reaction probes a mixed region on the outer part of the hot spot near the ablator-hot-spot interface. Experimental data were used to develop and validate the atomic-mix model used in two-dimensional simulations.

Venezuelan gas developments

International Nuclear Information System (INIS)

Michael, H.

1993-01-01

An overview is presented of the Venezuelan natural gas industry. The structure of PDVSA, the Petroleos de Venezuela Organization, its foreign and domestic affiliates, and its subsidiaries are discussed. Natural gas resources in Venezuela total 290 trillion cubic feet, and Venezuela's share of world, OPEC and latin American production and reserves are 1%, 11% and 26%, respectively for production and 3%, 6% and 49% for reserves. Venezuela's gas pipeline network, plants, production, and marketing are described. Natural gas production and demand forecasts to 2002 are presented. Gas resources are largely located in eastern Venezuela, and large volumes of natural gas non-associated with crude oil will start to become important in the Venezuelan natural gas industry. 19 figs

Development of a natural Gas Systems Analysis Model (GSAM)

International Nuclear Information System (INIS)

Godec, M.; Haas, M.; Pepper, W.; Rose, J.

1993-01-01

Recent dramatic changes in natural gas markets have significant implications for the scope and direction of DOE's upstream as well as downstream natural gas R ampersand D. Open access transportation changes the way gas is bought and sold. The end of the gas deliverability surplus requires increased reserve development above recent levels. Increased gas demand for power generation and other new uses changes the overall demand picture in terms of volumes, locations and seasonality. DOE's Natural Gas Strategic Plan requires that its R ampersand D activities be evaluated for their ability to provide adequate supplies of reasonably priced gas. Potential R ampersand D projects are to be evaluated using a full fuel cycle, benefit-cost approach to estimate likely market impact as well as technical success. To assure R ampersand D projects are evaluated on a comparable basis, METC has undertaken the development of a comprehensive natural gas technology evaluation framework. Existing energy systems models lack the level of detail required to estimate the impact of specific upstream natural gas technologies across the known range of geological settings and likely market conditions. Gas Systems Analysis Model (GSAM) research during FY 1993 developed and implemented this comprehensive, consistent natural gas system evaluation framework. Rather than a isolated research activity, however, GSAM represents the integration of many prior and ongoing natural gas research efforts. When complete, it will incorporate the most current resource base description, reservoir modeling, technology characterization and other geologic and engineering aspects developed through recent METC and industry gas R ampersand D programs

The Relationship between Polyamines and Hormones in the Regulation of Wheat Grain Filling

Science.gov (United States)

Liu, Yang; Gu, Dandan; Wu, Wei; Wen, Xiaoxia; Liao, Yuncheng

2013-01-01

The grain weight of wheat is strongly influenced by filling. Polyamines (PA) are involved in regulating plant growth. However, the effects of PA on wheat grain filling and its mechanism of action are unclear. The objective of the present study was to investigate the relationship between PAs and hormones in the regulation of wheat grain filling. Three PAs, spermidine (Spd), spermine (Spm), and putrescine (Put), were exogenously applied, and the grain filling characteristics and changes in endogenous PA and hormones, i.e., indole-3-acetic acid (IAA), zeatin (Z) + zeatin riboside (ZR), abscisic acid (ABA), ethylene (ETH) and gibberellin 1+4 (GAs), were quantified during wheat grain filling. Exogenous applications of Spd and Spm significantly increased the grain filling rate and weight, but exogenous Put had no significant effects on these measures. Exogenous Spd and Spm significantly increased the endogenous Spd, Spm, Z+ZR, ABA, and IAA contents and significantly decreased ETH evolution in grains. The endogenous Spd, Spm and Z+ZR contents were positively and significantly correlated with the grain filling rate and weight of wheat, and the endogenous ETH evolution was negatively and significantly correlated with the wheat grain filling rate and weight. Based upon these results, we concluded that PAs were involved in the balance of hormones that regulated the grain filling of wheat. PMID:24205154

The relationship between polyamines and hormones in the regulation of wheat grain filling.

Directory of Open Access Journals (Sweden)

Yang Liu

Full Text Available The grain weight of wheat is strongly influenced by filling. Polyamines (PA are involved in regulating plant growth. However, the effects of PA on wheat grain filling and its mechanism of action are unclear. The objective of the present study was to investigate the relationship between PAs and hormones in the regulation of wheat grain filling. Three PAs, spermidine (Spd, spermine (Spm, and putrescine (Put, were exogenously applied, and the grain filling characteristics and changes in endogenous PA and hormones, i.e., indole-3-acetic acid (IAA, zeatin (Z + zeatin riboside (ZR, abscisic acid (ABA, ethylene (ETH and gibberellin 1+4 (GAs, were quantified during wheat grain filling. Exogenous applications of Spd and Spm significantly increased the grain filling rate and weight, but exogenous Put had no significant effects on these measures. Exogenous Spd and Spm significantly increased the endogenous Spd, Spm, Z+ZR, ABA, and IAA contents and significantly decreased ETH evolution in grains. The endogenous Spd, Spm and Z+ZR contents were positively and significantly correlated with the grain filling rate and weight of wheat, and the endogenous ETH evolution was negatively and significantly correlated with the wheat grain filling rate and weight. Based upon these results, we concluded that PAs were involved in the balance of hormones that regulated the grain filling of wheat.

Unconventional gas development facilitates plant invasions.

Science.gov (United States)

Barlow, Kathryn M; Mortensen, David A; Drohan, Patrick J; Averill, Kristine M

2017-11-01

Vegetation removal and soil disturbance from natural resource development, combined with invasive plant propagule pressure, can increase vulnerability to plant invasions. Unconventional oil and gas development produces surface disturbance by way of well pad, road, and pipeline construction, and increased traffic. Little is known about the resulting impacts on plant community assembly, including the spread of invasive plants. Our work was conducted in Pennsylvania forests that overlay the Marcellus and Utica shale formations to determine if invasive plants have spread to edge habitat created by unconventional gas development and to investigate factors associated with their presence. A piecewise structural equation model was used to determine the direct and indirect factors associated with invasive plant establishment on well pads. The model included the following measured or calculated variables: current propagule pressure on local access roads, the spatial extent of the pre-development road network (potential source of invasive propagules), the number of wells per pad (indicator of traffic density), and pad age. Sixty-one percent of the 127 well pads surveyed had at least one invasive plant species present. Invasive plant presence on well pads was positively correlated with local propagule pressure on access roads and indirectly with road density pre-development, the number of wells, and age of the well pad. The vast reserves of unconventional oil and gas are in the early stages of development in the US. Continued development of this underground resource must be paired with careful monitoring and management of surface ecological impacts, including the spread of invasive plants. Prioritizing invasive plant monitoring in unconventional oil and gas development areas with existing roads and multi-well pads could improve early detection and control of invasive plants. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of a Gas Systems Analysis Model (GSAM)

International Nuclear Information System (INIS)

Becker, A.B.; Pepper, W.J.

1995-01-01

Objective of developing this model (GSAM) is to create a comprehensive, nonproprietary, PC-based model of domestic gas industry activity. The system can assess impacts of various changes in the natural gas system in North America; individual and collective impacts due to changes in technology and economic conditions are explicitly modeled in GSAM. Major gas resources are all modeled, including conventional, tight, Devonian Shale, coalbed methane, and low-quality gas sources. The modeling system assesses all key components of the gas industry, including available resources, exploration, drilling, completion, production, and processing practices. Distribution, storage, and utilization of natural gas in a dynamic market-gased analytical structure is assessed. GSAM is designed to provide METC managers with a tool to project impacts of future research, development, and demonstration benefits

Issues in Energy Economics Led by Emerging Linkages between the Natural Gas and Power Sectors

International Nuclear Information System (INIS)

Platt, Jeremy B.

2007-01-01

pressures in the natural gas market. The most significant illustration of these forces was the early 2007 suspension of development plans by a large power company, well before the Supreme Court's ruling on CO 2 as a tailpipe pollutant and President Bush's call for global goals on CO 2 emissions

Report on the joint research on the technology development of energy use reduction gas diffusion electrode salt electrolysis; Kyodo kenkyu energy shiyo gorika gas kakusan denkyoku shokuen denkai gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of energy conservation in the 'soda industry' which is an energy multi-consumption industry, study was made of the commercialization applying 'gas diffusion electrode' which is used for fuel cells, and the FY 2000 results were summed up. As to the development of production technology of gas diffusion electrode, conditional studies were conducted of the material production process, grinding process, mixing machine, filling, coating process, hot press process, etc. Concerning the evaluation of durability of the gas diffusion electrode, analysis of long-term operation electrode was conducted, and a lot of information on the degradation mechanism was obtained. In the degraded electrode, wetting of gas diffusion layer is going on, which is thought to directly cause the degradation. It is supposed that between the stable electrode and the degraded electrode, there are no changes in diameter of carbon powder and there is no carbon consumption. As to the verification test using the practical scale electrolytic cell, a trial operation started in February 2001. About the electrolytic performance, the electrolytic voltage is appropriately 2.2V, keeping the stable numerical value. The comparatively favorable performance is being maintained. (NEDO)

Gas migration from oil and gas fields and associated hazards

International Nuclear Information System (INIS)

Gurevich, A.E.; Endres, B.L.; Robertson Jr, J.O.; Chilingar, G.V.

1993-01-01

The migration of gas from oil and gas formations to the surface is a problem that greatly affects those surface areas where human activity exists. Underground gas storage facilities and oil fields have demonstrated a long history of gas migration problems. Experience has shown that the migration of gas to the surface creates a serious potential risk of explosion, fires, noxious odors and potential emissions of carcinogenic chemicals. These risks must be seriously examined for all oil and gas operations located in urban areas. This paper presents the mechanics of gas migration, paths of migration and a review of a few of the risks that should be considered when operating a gas facility in an urban area. The gas can migrate in a continuous or discontinuous stream through porous, water-filled media to the surface. The primary force in this migration of gas is the difference between specific weights of gas and water

EFECTO DE LA ALTURA DEL MANGUITO EN UNIONES SOLDADAS EN CAÑERÍAS DE COBRE BUSHING HEIGHT EFFECT IN SOLDERED COPPER PIPE JOINTS

Directory of Open Access Journals (Sweden)

Víctor Carmona

2006-12-01

Full Text Available Se perforó un tubo de cobre de 28,6 mm de diámetro, por el proceso de taladrado por fluencia térmica (TFT. Se prepararon manguitos de diferentes alturas, haciendo un preperforado con brocas convencionales HSS de diferentes diámetros. Se seleccionaron manguitos de dos alturas diferentes. Se determinó la circularidad de la perforación. Se soldó un tubo cobre de ø 12,7 mm en forma perpendicular a un tubo de cobre de ø 28,6 mm y se determinó la resistencia a la tracción de la unión soldada, para lo cual se diseñó un dispositivo mecánico que fue adaptado en la máquina universal de ensayos. Se hicieron ensayos de microdureza y metalografía de la unión. Se concluyó que el manguito de menor altura es suficiente para que la unión alcance la máxima resistencia.Copper tubes were drilled with thermal flow drilling. Conventional HSS drills diameters were used to make pre drilling holes. Different height bushings were made. Two of the bushing heights were selected. The bushing circularity was measured. A ø 12,7 mm tube was welded perpendicularly on a ø 28,6 mm tube. A especial support device was designed and it was adapted to the Universal Test Machine, to determine the tensile stress of the brazing joint. The micro hardness and metallographic test were made in the brazing zone. As a conclusion the lower height bushing is enough to reach the maximum resistance.

The development of the natural gas market in Morocco

International Nuclear Information System (INIS)

Bencheqroun, A.

1997-01-01

Thanks to the transit royalties gained with the Maghreb-Europe gas pipeline, Morocco will dispose of an important source of energy supply which will allow the development of a local natural gas market, and as part of the rural electrification policy, will dispose of a safe resource of power production. This paper presents the energy and economical situation of Morocco, in particular the development of LPG consumption, nd the perspectives of development of the natural gas market and of gas companies in this country. (J.S.)

Natural gas development and integration for Asian markets

International Nuclear Information System (INIS)

Hovdestad, W. R.; Belgrave, J. D. M.

1995-01-01

Development schedule, and natural gas resources available to Southeast Asian countries were discussed in view of the area's rapidly growing market for natural gas. As evidence, the increased regional trade and cooperation are evident in the form of organizations like the Association of South East Asian Nations (ASEAN) and Asia Pacific Economic Cooperation (APEC) Forum were cited. Liquid natural gas pipeline grids were about 1/3 complete at the time of writing. Further development and completion of this system was expected to occur over the next 3 decades. Integration of new and existing facilities were seen to be inevitable future developments. The potential for international movement of natural gas from producing countries to consuming countries was assessed and was expected to remain favourable in the long term

Development of Europe's gas hubs: Implications for East Asia

Directory of Open Access Journals (Sweden)

Xunpeng Shi

2016-10-01

Full Text Available Gas trading hubs have been initially developed in the US in 1980s, UK in 1990s, more recently in European in the 2000s and mulled in East Asia now. Due to its freshness and diversification in nationality, governance and culture, the European hub experience can offer valuable lessons for East Asia. This paper seeks to advance understanding of gas hub development in Europe and provide lessons for East Asia. The European experience highlights that market liberalization and transition of gas pricing mechanism are necessary in creating the competitive markets that are needed for functional gas hubs. Political will and regulations further safeguard the competition environment needed for hub development. Natural factors, such as significant domestic production and culture could have a significant impact on the hub development and transition of pricing mechanism. In East Asia, the path to gas trading hubs might be more difficult than in Europe but a growing market creates an opportunity to start new terms with new contracts. Nevertheless, East Asian needs to work hard to development its indigenous gas or LNG trading hubs.

Buffalo, bush meat, and the zoonotic threat of brucellosis in Botswana.

Directory of Open Access Journals (Sweden)

Kathleen Anne Alexander

Full Text Available Brucellosis is a zoonotic disease of global importance infecting humans, domestic animals, and wildlife. Little is known about the epidemiology and persistence of brucellosis in wildlife in Southern Africa, particularly in Botswana.Archived wildlife samples from Botswana (1995-2000 were screened with the Rose Bengal Test (RBT and fluorescence polarization assay (FPA and included the African buffalo (247, bushbuck (1, eland (5, elephant (25, gemsbok (1, giraffe (9, hartebeest (12, impala (171, kudu (27, red lechwe (10, reedbuck (1, rhino (2, springbok (5, steenbok (2, warthog (24, waterbuck (1, wildebeest (33, honey badger (1, lion (43, and zebra (21. Human case data were extracted from government annual health reports (1974-2006.Only buffalo (6%, 95% CI 3.04%-8.96% and giraffe (11%, 95% CI 0-38.43% were confirmed seropositive on both tests. Seropositive buffalo were widely distributed across the buffalo range where cattle density was low. Human infections were reported in low numbers with most infections (46% occurring in children (<14 years old and no cases were reported among people working in the agricultural sector.Low seroprevalence of brucellosis in Botswana buffalo in a previous study in 1974 and again in this survey suggests an endemic status of the disease in this species. Buffalo, a preferred source of bush meat, is utilized both legally and illegally in Botswana. Household meat processing practices can provide widespread pathogen exposure risk to family members and the community, identifying an important source of zoonotic pathogen transmission potential. Although brucellosis may be controlled in livestock populations, public health officials need to be alert to the possibility of human infections arising from the use of bush meat. This study illustrates the need for a unified approach in infectious disease research that includes consideration of both domestic and wildlife sources of infection in determining public health risks from

Spin exchange optical pumping based polarized 3He filling station for the Hybrid Spectrometer at the Spallation Neutron Source.

Science.gov (United States)

Jiang, C Y; Tong, X; Brown, D R; Culbertson, H; Graves-Brook, M K; Hagen, M E; Kadron, B; Lee, W T; Robertson, J L; Winn, B

2013-06-01

The Hybrid Spectrometer (HYSPEC) is a new direct geometry spectrometer at the Spallation Neutron Source at the Oak Ridge National Laboratory. This instrument is equipped with polarization analysis capability with 60° horizontal and 15° vertical detector coverages. In order to provide wide angle polarization analysis for this instrument, we have designed and built a novel polarized (3)He filling station based on the spin exchange optical pumping method. It is designed to supply polarized (3)He gas to HYSPEC as a neutron polarization analyzer. In addition, the station can optimize the (3)He pressure with respect to the scattered neutron energies. The depolarized (3)He gas in the analyzer can be transferred back to the station to be repolarized. We have constructed the prototype filling station. Preliminary tests have been carried out demonstrating the feasibility of the filling station. Here, we report on the design, construction, and the preliminary results of the prototype filling station.

Gas Industry in China: a New Resource for Development

Directory of Open Access Journals (Sweden)

Sergey Petrovich Popov

2013-06-01

Full Text Available Development of the gas industry in China since 1986 is considered by regions, by various consumer groups, gaseous fuels consumption pattern change with the development of gas transportation transmission and distribution systems. Current production of gaseous fuels, import infrastructure and natural gas prices in China are summarized. Implications on gas consumption growth in terms of customers and their geographical origin are provided. Competitive price stimations of the Russian natural gas for Chinese and other major gas importers in Eastern Asia are presented. Conclusion is made about Chinese monopsony on export gas pipelines from Siberia. The measures for elimination and/or reduction of such monopsony at the Asia-Pacific regional markets are offered

Improving the support characteristics of hydraulic fill

Energy Technology Data Exchange (ETDEWEB)

Corson, D. R.; Dorman, K. R.; Sprute, R. H.

1980-05-15

Extensive laboratory and field testing has defined the physical properties of hydraulic fill. Effect of void ratio on percolation rate has been quantified, and tests were developed to estimate waterflow through fill material in a given state underground. Beneficial effect on fill's support capability through addition of cement alone or in conjunction with vibratory compaction has been investigated. Two separate field studies in operating cut-and-fill mines measured vein-wall deformation and loads imposed on backfilled stopes. Technology has been developed that will effectively and efficiently dewater and densify ultra-fine-grained slurries typical of metal mine hydraulic backfill. At least two operators are using this electrokinetic technique to dewater slimes collected in underground sumps or impoundments. This technique opens up the possibility of using the total unclassified tailings product as a hydraulic backfill. Theoretical enhancement of ground support and rock-burst control through improved support capability will be tested in a full-scale mine stope installation. Both a horizontal layer and a vertical column of high modulus fill will be placed in an attempt to reduce stope wall closure, support more ground pressure, and lessen rock-burst occurrence.

Oil and gas development : a northern perspective

International Nuclear Information System (INIS)

Doyle, M.

1998-01-01

The development of the oil and gas industry in the North, and in particular its impact over the years on the town of Fort Nelson, British Columbia, is discussed. Other important issues such as cultural differences, government/industry/community partnerships in community development, employment, training and workforce development, land claims, Aboriginal consultation and the consequent appearance of reverse discrimination were discussed. The environment, safety programs, drug and alcohol programs are also reviewed. All of these issues have a bearing on the further development of the oil and gas industry in the Yukon

Suggestion for a natural gas development policy

International Nuclear Information System (INIS)

Drummond, P.H.

1987-01-01

First, this work presents some aspects concerning the reserves and the future of natural gas consumption in Brazil. Then, from the results of a case-study about the implementation of a natural gas distribution company in Fortaleza (Ceara), we analyse under which conditions the business of natural gas distribution is economically interesting (subject of the M.Sc. thesis developed by the author). In possession of this results, the author proposes directions for a Natural Gas Policy in Brazil, approaching also aspects of Tariffs Policy. (author)

Radio resource management using geometric water-filling

CERN Document Server

He, Peter; Zhou, Sheng; Niu, Zhisheng

2014-01-01

This brief introduces the fundamental theory and development of managing radio resources using a water-filling algorithm that can optimize system performance in wireless communication. Geometric Water-Filling (GWF) is a crucial underlying tool in emerging communication systems such as multiple input multiple output systems, cognitive radio systems, and green communication systems. Early chapters introduce emerging wireless technologies and provide a detailed analysis of water-filling. The brief investigates single user and multi-user issues of radio resource management, allocation of resources

The development of gas hubs in Europe

International Nuclear Information System (INIS)

Miriello, Caterina; Polo, Michele

2015-01-01

This paper investigates the development of wholesale markets for natural gas at the different stages of market liberalization. We identify three steps in the process: wholesale trade initially develops to cope with balancing needs when the shippers and suppliers segments become more fragmented; once the market becomes more liquid, it turns out to be a second source of gas procurement in alternative to long term contracts; finally, to manage price risk financial instruments are traded. We review in detail the different regulatory measures that must be introduced to create an efficient and functioning wholesale gas market. Finally, we analyze the evolution of gas hubs in the UK, the Netherlands, Germany and Italy in terms of market rules and market liquidity. We argue that each of these country cases can be easily located into the evolutionary path we have highlighted at the beginning, with the UK and the Netherlands leading the process, Germany and Italy constrained by limited supply; Italy is also showing an interesting counterfactual. -- Highlights: •The paper illustrates development paths for natural gas hubs in Europe. •Wholesale trade increases with competition. •The regulatory settings of UK, Netherlands, Germany and Italy are reviewed. •Each country is located into the evolutionary path highlighted in the analytical framework

Systolic ventricular filling.

Science.gov (United States)

Torrent-Guasp, Francisco; Kocica, Mladen J; Corno, Antonio; Komeda, Masashi; Cox, James; Flotats, A; Ballester-Rodes, Manel; Carreras-Costa, Francesc

2004-03-01

The evidence of the ventricular myocardial band (VMB) has revealed unavoidable coherence and mutual coupling of form and function in the ventricular myocardium, making it possible to understand the principles governing electrical, mechanical and energetical events within the human heart. From the earliest Erasistratus' observations, principal mechanisms responsible for the ventricular filling have still remained obscured. Contemporary experimental and clinical investigations unequivocally support the attitude that only powerful suction force, developed by the normal ventricles, would be able to produce an efficient filling of the ventricular cavities. The true origin and the precise time frame for generating such force are still controversial. Elastic recoil and muscular contraction were the most commonly mentioned, but yet, still not clearly explained mechanisms involved in the ventricular suction. Classical concepts about timing of successive mechanical events during the cardiac cycle, also do not offer understandable insight into the mechanism of the ventricular filling. The net result is the current state of insufficient knowledge of systolic and particularly diastolic function of normal and diseased heart. Here we summarize experimental evidence and theoretical backgrounds, which could be useful in understanding the phenomenon of the ventricular filling. Anatomy of the VMB, and recent proofs for its segmental electrical and mechanical activation, undoubtedly indicates that ventricular filling is the consequence of an active muscular contraction. Contraction of the ascendent segment of the VMB, with simultaneous shortening and rectifying of its fibers, produces the paradoxical increase of the ventricular volume and lengthening of its long axis. Specific spatial arrangement of the ascendent segment fibers, their interaction with adjacent descendent segment fibers, elastic elements and intra-cavitary blood volume (hemoskeleton), explain the physical principles

Regulation and development of the Argentinean gas market

International Nuclear Information System (INIS)

Ponzo, Ricardo; Dyner, Isaac; Arango, Santiago; Larsen, Erik R.

2011-01-01

Gas markets are becoming increasingly important around the world and the long-term evolution of these markets is of strategic importance for many countries. This makes it essential to understand how regulation and intervention in these markets affects the long-term prospect for the secure supply of gas. We use Argentina as a case to illustrate some of the issues and consequences of gas regulation. Argentina is a country that has had a significant increase in the use of gas over the years, and where a potential gas deficit looms large in the present and the future. Based on a simulation model developed to understand the supply of gas in Argentina, we discuss how regulation will influence the long-term supply of gas in both Argentina and surrounding countries. Using the model, we develop a series of scenarios to highlight the consequences of different current and possible future interventions in the market by the Regulator. Finally, we discuss short-term regulatory options to reduce the impact of a gas deficit, and the possibility of securing the long-term supply of gas in Argentina. - Research Highlights: →This study show that even short intervention in markets can have long term impact. →Simulation can help to understand the evolution of the Argentinean gas markets. →Scenarios highlight the gas shortage.

Gas filled prototype of a CdZnTe pixel detector

International Nuclear Information System (INIS)

Ramsey, B.; Sharma, D.; Sipila, H.; Gostilo, V.; Loupilov, A.

2001-01-01

CdZnTe pixel structures are currently the most promising detectors for the focal planes of hard X-ray telescopes, for astronomical observation in the range 5-100 keV. In Sharma et al. (Proc. SPIE 3765 (1999) 822) and Ramsey et al. (Nucl. Instrum. Methods A 458 (2001) 55) we presented preliminary results on the development of prototype 4x4 CdZnTe imaging detectors operated under vacuum. These pixel detectors were installed inside vacuum chambers on three-stage Peltier coolers providing detector temperatures down to -40 deg. C. A miniature sputter ion pump inside each chamber maintained the necessary vacuum of 10 -5 Torr. At a temperature of -20 deg. C we achieved an FWHM energy resolution of between 2% and 3% at 60 keV and ∼15% at 5.9 keV; however, the dependency on temperature was weak and at +20 deg. C the respective resolutions were 3% and 20%. As the detectors could be operated at room temperature without loss of their good characteristics it was possible to exclude the sputter ion pump and fill the chamber with dry nitrogen instead. We have tested a nitrogen-filled CdZnTe (5x5x1 mm 3 ) prototype having 0.65x0.65 mm 2 readout pads on a 0.75 mm pitch. The interpixel resistance at an applied voltage of 10 V was higher than 50 GΩ and the pixel leakage currents at room temperature with a bias of 200 V between each pad and the common electrode did not exceed 0.8 nA. The pixel detector inside the microassembly, which also contained the input stages of the preamplifiers, was installed on a Peltier cooler to maintain the detector temperature at +20 deg. C. To define real leakage currents of the pixels in their switched-on state we have checked the voltage on the preamplifiers feedback resistors. The resulting currents were 10-50 pA at a detector bias of 500 V. Under test, the typical energy resolution per pixel at +20 deg. C was ∼3% at energy 59.6 keV and ∼20% at energy 5.9 keV, which are similar to the values obtained in the vacuum prototype at room temperature

CHEMICAL COMPOSITION AND in vitro GAS PRODUCTION OF SOME LEGUME BROWSE SPECIES IN SUBTROPICAL AREAS OF MEXICO

Directory of Open Access Journals (Sweden)

Carlos A Garcia Montes de Oca

2011-03-01

Full Text Available The objective of the present study was to determine the chemical composition and in vitro gas production of different legume and wild arboreal pods. Seven seeds of legume browse species, Mexican calabash (Crescentia alata, esculent leadtree (Leucaena esculenta, guamuchil (Phitecellobium dulce, bastard cedar (Guazuma ulmifolia, needle bush (Acacia farnesiana, mimosa (Mimosa sp. and elephant ear tree (Enterolobium cyclocarpum. Were evaluated for their chemical composition (g/kg DM and in vitro gas production pattern. Crude Protein was higher for L. esculenta (220 and lower for G. ulmifolia (70. Neutral and acid detergent fiber were higher for G. ulmifolia (687 and 554 and lower for A. farnesiana (267 and 176. Lignin was higher for Mimosa sp. (219 and lower for P. dulce (81. Total gas production (ml gas/g DM of P. dulce (187 and E. cyclocarpum (164 were higher (P

Study on the development of ultrasonic gas flowmeter

International Nuclear Information System (INIS)

Hwang, Won Ho; Park, Sang Gug; Yang, Kyu Hong; Jhang, Kyung Young

2001-01-01

Ultrasonic flowmeters have more advantages than the conventional method using pressure-difference. In these reasons, many advanced nations are already selling the commercial model. In RIST, we have been developed ultrasonic gas flow meter for the localization since a project was been contracted with POSCO in 1997. This paper describes a new ultrasonic gas flowmeter. This ultrasonic gas flowmeter is developed for accurate measurement of gases in a harsh environmental conditions. It is especially suited for measuring LDG, COG, BFG gases produced in iron and steel making process. In this study, we had developed the commercial model about the first tested model and applied a completed system to the POSCO gas line. Its performance has already well been proven by extensive field tests for several months in POSCO, iron and steel making company

Candidates stick to party guns. In lieu of new healthcare plans, Bush, Gore follow party reform proposals.

Science.gov (United States)

Gardner, J; Hallam, K

2000-07-03

As the Democratic and GOP nominating conventions approach next month, presumptive nominees Al Gore and George W. Bush are offering no new healthcare plans, both preferring to ride the healthcare waves already set in motion by their respective party's leadership. And the really interesting thing is, the plans aren't that different. Call it creeping incrementalism.

Relações Brasil e Estados Unidos no período Bush: expectativas e frustrações

Directory of Open Access Journals (Sweden)

Virgílio Caixeta Arraes

2012-09-01

The article deals with the political and economic relationship between Brazil and United States during the George W Bush mandate (2001-2008. It  discusses the failed attempt to establish a hemispheric free trade agreement, due to the American protectionism, and to expand the use of biofuel. Finally, it also discusses the creation of the Fourth Fleet.

Competition on the British natural gas market - development and mechanisms, and effects on the British gas industry

International Nuclear Information System (INIS)

Millgramm, C.

1996-01-01

The development of the British gas industry shows that structural changes at one industrial stage may have effects on the other stages and that competition at one stage (commercial stage) may be limited by the way the other stages are structured. The conditions of regulation in the gas industry, the development at its different stages, and its present structure are described. The effects of commercial restructuring on gas exploration and gas lifting, gas transport and gas storage are analyzed. (orig./UA) [de

The development of Middle-East natural gas markets

International Nuclear Information System (INIS)

Bahgat, G.

2001-01-01

The economic, political and strategic environment under which plans to explore and develop gas fields in the Middle East have been drawn and implemented are reviewed. The topic is of particular importance in view of the fact that the Middle East holds more than one third of the world's proven reserves of natural gas, largely underdeveloped and under utilized as of the beginning of the second millennium. Particular attention is paid to Saudi Arabia, Iran and Israel, where despite serious challenges and political uncertainties, significant developments are underway to develop the region's natural gas potential. 27 refs., 1 tab

Intelligent fracture creation for shale gas development

KAUST Repository

Douglas, Craig C.

2011-05-14

Shale gas represents a major fraction of the proven reserves of natural gas in the United States and a collection of other countries. Higher gas prices and the need for cleaner fuels provides motivation for commercializing shale gas deposits even though the cost is substantially higher than traditional gas deposits. Recent advances in horizontal drilling and multistage hydraulic fracturing, which dramatically lower costs of developing shale gas fields, are key to renewed interest in shale gas deposits. Hydraulically induced fractures are quite complex in shale gas reservoirs. Massive, multistage, multiple cluster treatments lead to fractures that interact with existing fractures (whether natural or induced earlier). A dynamic approach to the fracturing process so that the resulting network of reservoirs is known during the drilling and fracturing process is economically enticing. The process needs to be automatic and done in faster than real-time in order to be useful to the drilling crews.

The future of the US natural gas market

International Nuclear Information System (INIS)

Linden, H.R.

1993-01-01

The United States gas industry is entering a period when it will have an excellent opportunity to recapture the 30 percent share of the primary energy market it enjoyed in 1973. In spite of unresolved problems stemming from its drastic restructuring during the Reagan and Bush administrations, most aspects of today's political and regulatory climate favor a substantial expansion of natural gas use in the economy. Combined with the now nearly universal recognition that Lower-48 natural gas resources and North American resources as a whole are abundant and recoverable at relatively low cost, this has created unusually high levels of preference for natural gas as a primary energy source. The favorable outlook for the US gas industry at the start of 1993 is the result of an extremely positive political, regulatory, and business climate for expanded use of natural gas, supported by a Lower-48 resource base capable of meeting expected levels of demand at competitive costs for at least 25 years. This assumes continued advances in the whole spectrum of technologies from exploration and production to end use that halted and partially reversed the sharp 1973 to 1986 decline of gas share of the US energy market. In addition to the uncertainties that cloud this assumption, as the gas industry's commitment to aggressive support of R ampersand D seems to be faltering, there are other problems that need to be resolved to ensure the full realization of the potential of gas as the bridge fuel to a sustainable energy system

New functionally dioecious bush tomato from northwestern Australia, Solanum ossicruentum , may utilize ?trample burr? dispersal

OpenAIRE

Martine, Christopher T.; Cantley, Jason T.; Frawley, Emma S.; Butler, Alice R.; Jordon-Thaden, Ingrid E.

2016-01-01

Abstract A new Australian species of functionally dioecious bush tomato of Solanum subgenus Leptostemonum is described. Solanum ossicruentum Martine & J.Cantley, sp. nov., is thought to be allied with members of the problematic ?Dioicum Complex? lineage, but differs in its short silvery indumentum, long calyx lobes, larger stature, and an unusual fruit morphology that may represent ?trample burr? seed dispersal. The species occurs in a range extending from the eastern Kimberley in Western Aus...

Breakthrough and prospect of shale gas exploration and development in China

Directory of Open Access Journals (Sweden)

Dazhong Dong

2016-01-01

Full Text Available In the past five years, shale gas exploration and development has grown in a leaping-forward way in China. Following USA and Canada, China is now the third country where industrial shale gas production is realized, with the cumulative production exceeding 60 × 108 m3 until the end of 2015. In this paper, the main achievements of shale gas exploration and development in China in recent years were reviewed and the future development prospect was analyzed. It is pointed out that shale gas exploration and development in China is, on the whole, still at its early stage. Especially, marine shale gas in the Sichuan Basin has dominated the recent exploration and development. For the realization of shale gas scale development in China, one key point lies in the breakthrough and industrial production of transitional facies and continental facies shale gas. Low–moderate yield of shale gas wells is the normal in China, so it is crucial to develop key exploration and development technologies. Especially, strictly controlling single well investment and significantly reducing cost are the important means to increase shale gas exploration and development benefits. And finally, suggestions were proposed in five aspects. First, continuously strengthen theoretical and technical researches, actively carry out appraisal on shale gas “sweet spots”, and gradually accumulate development basis. Second, stress on primary evaluation of exploration and development, highlight the effective implementation of shale gas resources, and control the rhythm of appraisal drilling and productivity construction. Third, highlight fine description and evaluation of shale gas reservoirs and increase the overall development level. Fourth, intensify the research on exploration and development technologies in order to stand out simple and practical technologies with low costs. And fifth, summarize the experiences in fast growth of shale gas exploration and development, highlight

The perspectives of development of natural gas for vehicles

International Nuclear Information System (INIS)

Anon.

1996-01-01

This short paper analyses the actions carried out in the world, and in particular in France, to develop and promote the use of natural gas for vehicles (NGV). In France, a protocol of agreement was signed in June 1994 between the French car manufacturers, Gaz de France and the French Association of Natural Gas for Vehicles (AFGNV) in order to develop new kinds of gas fueled vehicles, more optimized engines, to increase the number of gas distribution stations, to ratify the new models of vehicles and the specific parts for these vehicles (composite materials tanks), to carry out R and D work on gas compressors, and to develop public and private fleets of urban buses and public service vehicles. The forthcoming application of the 'Clean Air Law' will support these actions. Significant and similar developments take place also in more than 30 other countries under the same environmental motivation and ambitious programs are planned in the USA, Japan and Argentina for the year 2000. The R and D effort now focusses on the use of LNG instead of compressed natural gas. (J.S.)

The Spanish experience - future developments in the gas industry

International Nuclear Information System (INIS)

Moraleda, P.

1996-01-01

Spanish experience is presented concerned it may be useful at the time of setting up a natural gas industry. The Spanish natural gas industry is of recent creation. Developing infrastructure and securing gas supplies have been major challenges. Challenges which, are also common for majority of the countries. The presentation is split into two blocks: the first one is on our experience in the establishment and consolidation of the market for natural gas in Spain. The second block deals with future developments aiming to strengthen the security of supply; and with the opportunities and threats the gas industry will face

Gas fuels for the transport sector; Denmark; Gas til transportsektoren

Energy Technology Data Exchange (ETDEWEB)

2012-07-01

Recent analyses suggest that especially biogas, but also natural gas in macroeconomic terms will be attractive propellants, including for heavy transport. To implement a Danish expansion of gas infrastructure for transportation, the report recommends the following essential elements: 1) A Danish rollout should be closely linked to contracts with fleet owners with heavy vehicles / taxis / vans and the like, thus ensuring high utilization of filling stations; 2) About 10 larger, flexible CNG filling stations set up at major fleet owners is estimated as sufficient for an initial deployment phase, strategically distributed in and around Copenhagen, the major cities and along the main road network from Sweden to Germany; 3) A certain time-limited funding for the construction of infrastructure is likely to cause a rapid spread, if desired, and if other business conditions are in place; 4) There is a need for adjustment of tax terms - the rules for green taxes should be adjusted, and it should be considered to lower the taxes on CNG and biogas; 5) Natural gas mixed with biogas should be an integral element of a comprehensive strategy to ensure maximum CO{sub 2} displacement. (LN)