The bioeroding sponge Cliona orientalis will not tolerate future projected ocean warming.

Science.gov (United States)

Ramsby, Blake D; Hoogenboom, Mia O; Smith, Hillary A; Whalan, Steve; Webster, Nicole S

2018-05-29

Coral reefs face many stressors associated with global climate change, including increasing sea surface temperature and ocean acidification. Excavating sponges, such as Cliona spp., are expected to break down reef substrata more quickly as seawater becomes more acidic. However, increased bioerosion requires that Cliona spp. maintain physiological performance and health under continuing ocean warming. In this study, we exposed C. orientalis to temperature increments increasing from 23 to 32 °C. At 32 °C, or 3 °C above the maximum monthly mean (MMM) temperature, sponges bleached and the photosynthetic capacity of Symbiodinium was compromised, consistent with sympatric corals. Cliona orientalis demonstrated little capacity to recover from thermal stress, remaining bleached with reduced Symbiodinium density and energy reserves after one month at reduced temperature. In comparison, C. orientalis was not observed to bleach during the 2017 coral bleaching event on the Great Barrier Reef, when temperatures did not reach the 32 °C threshold. While C. orientalis can withstand current temperature extremes (<3 °C above MMM) under laboratory and natural conditions, this species would not survive ocean temperatures projected for 2100 without acclimatisation or adaptation (≥3 °C above MMM). Hence, as ocean temperatures increase above local thermal thresholds, C. orientalis will have a negligible impact on reef erosion.

Hematological Changes Associated with Theileria orientalis Infection in Korean Indigenous Cattle.

Science.gov (United States)

Kim, Suhee; Yu, Do-Hyeon; Kang, Sung-Woo; Chae, Jeong-Byoung; Choi, Kyoung-Seong; Kim, Hyeon-Cheol; Park, Bae-Keun; Chae, Joon-Seok; Park, Jinho

2017-10-01

Tick-borne pathogens can cause serious problems in grazing cattle. However, little information is available on tick-mediated diseases in cattle grazing on mountains. Thus, this study aimed to understand the potential problems related to tick-borne diseases in grazing cattle through the investigation of prevalent tick-transmitted infections, and their associated hematological changes, in terms of season and grazing type in Korean indigenous cattle (=Hanwoo). Hanwoo cattle from 3 regions of the Republic of Korea (=Korea) were either maintained indoors or placed on grassy mountains from spring to fall of 2014 and 2015. Cattle that grazed in mountainous areas showed a greater prevalence of tick-borne infections with an increased Theileria orientalis infection rate (54.7%) compared to that in non-grazing cattle (16.3%) (Pcattle were significantly lower than those of non-grazing cattle throughout the season (Pcattle in mountainous areas is closely associated with an increase in T. orientalis infection (RR=3.4, Pcattle in mountainous areas of Korea are at a high risk of infection by T. orientalis, which can lead to hematological alterations. This study highlights the necessity of preventive strategies that target T. orientalis infection.

Antibacterial and Antioxidant Activities of Liquidambar Orientalis Mill. Various Extracts Against Bacterial Pathogens Causing Mastitis

Directory of Open Access Journals (Sweden)

Gülten Ökmen

2017-08-01

Full Text Available Antibiotic resistance is being constantly developed worldwide. Coagulase Negative Staphylococci (CNS and Staphylococcus aureus are common causes of bovine subclinical mastitis. Bioactive compound of medicinal plants shows anti-microbial, anti-mutagenic and anti-oxidant effects. The anti-bacterial and anti-oxidant activities of Liquidambar orientalis (L. orientalis extracts on subclinical mastitis causing bacteria in cows have not been reported to date. The aim of the present study was to examine anti-bacterial and anti-oxidant effects of L. orientalis leaf extracts on S. aureus and CNS isolated from cows with subclinical mastitis symptoms. In this study, 3.2 mg/mL minimum inhibitory concentration (MIC of ethanol extracts of L. orientalis has shown to be a most potent anti-bacterial and anti-oxidant for all isolated bacterial species from mastitis cows. In this study, it was investigated anti-bacterial and anti-oxidant potentials of acetone, methanol and ethanol extracts of the L. orientalis. The acetone extract showed maximum inhibition zone against S. aureus numbered 17 (12 mm. In addition to anti-bacterial properties, anti-oxidant activity of L. orientalis extract was examined by ABTS [2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid] free radical assay. Trolox was used as a positive control anti-oxidant. Ethanol extract exhibited a strong anti-oxidant activity like Trolox anti-oxidant which was effective at 2.58 mM concentration. Bioactive compounds of sweet gum may be useful to screening mastitis causing bacteria for clinical applications.

"Chitin-specific" peroxidases in plants.

Science.gov (United States)

Maksimov, I V; Cherepanova, E A; Khairullin, R M

2003-01-01

The activity of various plant peroxidases and the ability of their individual isoforms to bind chitin was studied. Some increase in peroxidase activity was observed in crude extracts in the presence of chitin. Activated peroxidases of some species fell in the fraction not sorbed on chitin and those of other species can bind chitin. Only anionic isoperoxidases from oat (Avena sativa), rice (Oryza sativa), horseradish (Armoracia rusticana), garden radish (Raphanus sativus var. radicula), peanut (Arachis hypogaea), and tobacco (Nicotiana tabacum Link et Otto) were sorbed on chitin. Both anionic and cationic isoforms from pea (Pisum sativum), galega(Galega orientalis), cucumber (Cucumis sativus), and zucchini (Cucurbita pepo L.) were sorbed on chitin. Peroxidase activation under the influence of chitin was correlated to the processes that occur during hypersensitive reaction and lignification of sites, in which pathogenic fungus penetrates into a plant. The role of chitin-specific isoperoxidases in inhibition of fungal growth and connection of this phenomenon with structural characteristics of isoperoxidases are also discussed.

Biological performance of Liquidambar orientalis Mill. heartwood

Science.gov (United States)

Evren Terzi; S. Nami Kartal; Claudia Marcela Ibáñez; Coþkun Köse; Rachel Arango; Carol A. Clausen; Frederick. Green III

2012-01-01

New approaches for wood protection based on green technologies have increased interest in using heartwood portions of certain wood species for the effects (toxic and antioxidant properties, chelate formation, hydrophobicity) of extractives located in heartwood. This study evaluated the biological performance of heartwood of Liquidambar orientalis...

A Mesa Galega na Bahia: a alimentação dos imigrantes galegos e descendentes em Salvador

OpenAIRE

Viana, Fabiana Paixão

2016-01-01

Desde as últimas décadas do século XIX Salvador foi o destino escolhido por muitos galegos que cruzaram o Oceano Atlântico em busca do sonho de “conquistar a América”. Na capital baiana estes imigrantes sentiram as diferenças entre a sociedade galega e a soteropolitana, principalmente em relação a língua, aos hábitos alimentares e ao tratamento hostil e preconceituoso dispensado, bilateralmente, entre os imigrantes galegos e os soteropolitanos. Os galegos se destacaram nos setores do comércio...

Emergence of new genotype and diversity of Theileria orientalis parasites from bovines in India.

Science.gov (United States)

George, Neena; Bhandari, Vasundhra; Reddy, D Peddi; Sharma, Paresh

2015-12-01

Bovine theileriosis is a serious threat to livestock worldwide. Uncertainty around species prevalence, antigenic diversity and genotypes of strains make it difficult to assess the impact of this parasite and to provide necessary treatment. We aimed to characterize genotypic diversity, phylogeny and prevalence of Theileria orientalis parasites from the states of Telangana and Andhra Pradesh, India by collecting bovine blood samples from the major districts of the two states. Bioinformatic analysis identified antigenic diversity among the prevalent parasite strains using major piroplasm surface protein (MPSP) gene. Our study revealed a prevalence rate of 4.8% (n=41/862) of T. orientalis parasites in bovine animals and a new genotype of T. orientalis parasite which was not previously reported in India. The emergence of these new genotypes could be an explanation for the frequent outbreaks of bovine theileriosis. Further, whole genome sequencing of T. orientalis strains will help to elucidate the genetic factors relevant for transmissibility and virulence as well as vaccine and new drug development. Copyright © 2015 Elsevier B.V. All rights reserved.

New Records To The Vascular Flora Of Kazakhstan (Central Asia

Directory of Open Access Journals (Sweden)

Ebel Aleksandr L.

2015-12-01

Full Text Available The paper presents distributional data for seven species new for the flora of Kazakhstan: Atriplex gardneri var. aptera (A. Nelson S. L. Welsh. & Crompton, Cardamine hirsuta L., Carduus acanthoides L., Galega orientalis Lam., Silene cserei Baumg., Didymophysa fedtschenkoana Regel and Acinos arvensis (Lam. Dandy. Didymophysa fedtschenkoana is a native element in the Kazakh flora; the other species should be treated as alien, expansively spreading or invasive in this part of Asia. A list of localities of the species in Kazakhstan and their habitat preferences are presented.

Molecular epidemiology of bovine Babesia spp. and Theileria orientalis parasites in beef cattle from northern and northeastern Thailand.

Science.gov (United States)

Jirapattharasate, Charoonluk; Adjou Moumouni, Paul Franck; Cao, Shinuo; Iguchi, Aiko; Liu, Mingming; Wang, Guanbo; Zhou, Mo; Vudriko, Patrick; Changbunjong, Tanasak; Sungpradit, Sivapong; Ratanakorn, Parntep; Moonarmart, Walasinee; Sedwisai, Poonyapat; Weluwanarak, Thekhawet; Wongsawang, Witsanu; Suzuki, Hiroshi; Xuan, Xuenan

2016-02-01

Beef cattle production represents the largest cattle population in Thailand. Their productivity is constrained by tick-borne diseases such as babesiosis and theileriosis. In this study, we determined the prevalence of Babesia bigemina, Babesia bovis and Theileria orientalis using polymerase chain reaction (PCR). The genetic markers that were used for detection of the above parasites were sequenced to determine identities and similarity for Babesia spp. and genetic diversity of T. orientalis. Furthermore the risk factors for the occurrence of the above protozoan parasites in beef cattle from northern and northeastern parts of Thailand were assessed. A total of 329 blood samples were collected from beef cattle in 6 provinces. The study revealed that T. orientalis was the most prevalent (30.1%) parasite in beef cattle followed by B. bigemina (13.1%) and B. bovis (5.5%). Overall, 78.7% of the cattle screened were infected with at least one of the above parasites. Co-infection with Babesia spp. and T. orientalis was 30.1%. B. bigemina and T. orientalis were the most prevalent (15.1%) co-infection although triple infection with the three parasites was observed in 3.0% of the samples. Sequencing analysis revealed that B. bigemina RAP1 gene and B. bovis SBP2 gene were conserved among the parasites from different cattle samples. Phylogenetic analysis showed that the T. orientalis MPSP gene from parasites isolated from cattle in north and northeast Thailand was classified into types 5 and 7 as reported previously. Lack of tick control program was the universal risk factor of the occurrence of Babesia spp. and T. orientalis infection in beef cattle in northern and northeastern Thailand. We therefore recommend training of farmers on appropriate tick control strategies and further research on potential vectors for T. orientalis and elucidate the effect of co-infection with Babesia spp. on the pathogenicity of T. orientalis infection on beef in northern and northeastern Thailand

[Study on HPLC-FPS of raw and processed fructus polygoni orientalis].

Science.gov (United States)

Zhai, Yanjun; Zhao, Min; Zhang, Hui; Chu, Zhengyun; Kang, Tingguo

2010-03-01

To establish the HPLC fingerprint method of Fructus Polygoni Orientalis before and after processed by choosing taxifolin as reference to compare the changes of chemical composition. HPLC method was emplyed with a gradient elution phase in a flow rate of 1 mL x min(-1) and the detection wavelength of 270 nm. Twenty marker peaks were marked out in the raw samples and 33 marker peaks in the processed product. Methodology met was consistent with the requirement, similarity was exceeded 0.9. This method is stationary, precise and feasible, which provide references of quality control for Fructus Polygoni Orientalis.

Evolutionary History of the Genus Capsella (Brassicaceae - Capsella orientalis , New for Mongolia

Directory of Open Access Journals (Sweden)

Barbara Neuffer

2014-12-01

Full Text Available To elucidate the evolutionary history of the genus Capsella , we included the hitherto poorly known species C. orientalis and C. thracica into our studies together with C. grandifl ora , C. rubella , and C. bursa-pastoris . We sequenced the ITS, and four loci of noncoding cpDNA regions (trnL – F, rps16, trnH – psbA, trnQ – rps16. In common garden fi eld experiments C. orientalis turned out as early fl owering with a specifi c leaf type. The crossing ability of the species was tested in pollen germination experiments. Capsella orientalis (self-compatible, SC; 2n = 16 forms a clade (eastern lineage with C . bursa-pastoris (SC; 2n = 32, which is a sister clade (western lineage to C. grandifl ora (self-incompatible, SI; 2n = 16 and C. rubella (SC; 2n = 16. Capsella bursa-pastoris is an autopolyploid species of multiple origin, whereas the Bulgarian endemic C. thracica (SC; 2n = 32 is allopolyploid and emerged from interspecifi c hybridisation between C. bursa-pastoris and C. grandifl ora . The common ancestor of the two lineages was diploid and SI, and its distribution ranged from eastern Europe to central Asia, predominantly confi ned to steppe like habitats. Biogeographic dynamics during the Pleistocene caused geographic and genetic subdivisions within the common ancestor giving rise to the two extant lineages. Capsella orientalis is verifi ed at several positions in western Mongolia.

The Antimicrobial Activity of Aliquidambar orientalis mill. Against ...

African Journals Online (AJOL)

Background: Medicinal plants are an important source of substances which are claimed to induce antimicrobial, antimutagenic and antioxidant effects. Many plants have been used due to their antimicrobial treatments. Antimicrobial and antioxidant activities of L. orientalis have not been reported to the present day. The aim ...

Emergence of new types of Theileria orientalis in Australian cattle and possible cause of theileriosis outbreaks

Directory of Open Access Journals (Sweden)

Kinyanjui Peter

2011-02-01

Full Text Available Abstract Theileria parasites cause a benign infection of cattle in parts of Australia where they are endemic, but have, in recent years, been suspected of being responsible for a number of outbreaks of disease in cattle near the coast of New South Wales. The objective of this study was to identify and characterize the species of Theileria in cattle on six farms in New South Wales where disease outbreaks have occurred, and compare with Theileria from three disease-free farms in Queensland that is endemic for Theileria. Special reference was made to sub-typing of T. orientalis by type-specific PCR and sequencing of the small subunit (SSU rRNA gene, and sequence analysis of the gene encoding a polymorphic merozoite/piroplasm surface protein (MPSP that may be under immune selection. Nucleotide sequencing of SSU rRNA and MPSP genes revealed the presence of four Theileria genotypes: T. orientalis (buffeli, T. orientalis (ikeda, T. orientalis (chitose and T. orientalis type 4 (MPSP or type C (SSU rRNA. The majority of animals showed mixed infections while a few showed single infection. When MPSP nucleotide sequences were translated into amino acids, base transition did not change amino acid composition of the protein product, suggesting possible silent polymorphism. The occurrence of ikeda and type 4 (type C previously not reported to occur and silent mutation is thought to have enhanced parasite evasion of the host immune response causing the outbreak.

First identification of Francisella noatunensis subsp. orientalis causing mortality in Mexican tilapia Oreochromis spp.

Science.gov (United States)

Ortega, Cesar; Mancera, Gerardo; Enríquez, Ricardo; Vargas, Augusto; Martínez, Simón; Fajardo, Raúl; Avendaño-Herrera, Ruben; Navarrete, María José; Romero, Alex

2016-08-09

Francisellosis, an emerging disease in tilapia Oreochromis spp., is caused by the facultative, intracellular bacterium Francisella noatunensis subsp. orientalis, which is present in various countries where tilapia farming is commercially important. We confirmed the presence of francisellosis in Mexican tilapia cultures in association with an outbreak during the second semester of 2012. Broodstock fish presented a mortality rate of approximately 40%, and disease was characterized by histologically classified granulomas, or whitish nodules, in different organs, mainly the spleen and kidney. Through DNA obtained from infected tissue and pure cultures in a cysteine heart medium supplemented with hemoglobin, F. noatunensis subsp. orientalis was initially confirmed through the amplification and analysis of the 16S rRNA gene and the internal transcribed spacer region. Phylogenetic analysis of these genes demonstrated close similarity with previously reported F. noatunensis subsp. orientalis sequences obtained from infected tilapia from various countries. The identification of this subspecies as the causative agent of the outbreak was confirmed using the iglC gene as a target sequence, which showed 99.5% identity to 2 F. noatunensis subsp. orientalis strains (Ethime-1 and Toba04). These findings represent the first documented occurrence of francisellosis in Mexican tilapia cultures, which highlights the importance of establishing preventative measures to minimize the spread of this disease within the Mexican aquaculture industry.

Essential oil composition and bioactivity of Thuja orientalis and ...

African Journals Online (AJOL)

The chemical composition of the essential oil extracted by hydro-distillation using Clevenger apparatus from aerial parts of Thuja orientalis and Eucalyptus camaldulensis grown in Ondo State, Nigeria was analysed by Gas Chromatography/Mass Spectrometry technique. Toxicity of the essential oils using anti-feedant and ...

Developing high throughput quantitative PCR assays for diagnosing Ikeda and other Theileria orientalis types common to New Zealand in bovine blood samples.

Science.gov (United States)

Pulford, D J; Gias, E; Bueno, I M; McFadden, Amj

2016-01-01

To develop rapid, quantitative PCR (qPCR) assays using high resolution melt (HRM) analysis and type-specific TaqMan assays for identifying the prevalent types of Theileria orientalis found in New Zealand cattle; and to evaluate their analytical and diagnostic characteristics compared with other assays for T. orientalis. Nucleotide sequences aligned with T. orientalis Buffeli, Chitose and Ikeda types, obtained from DNA extracted from blood samples from infected cattle, were used to design HRM and type-specific probe-based qPCR assays. The three type-specific assays were also incorporated into a single-tube multiplex qPCR assay. These assays were validated using DNA extracted from blood samples from cattle in herds with or without clinical signs of T. orientalis infection, other veterinary laboratory samples, as well as plasmids containing T. orientalis type-specific sequences. Diagnostic specificity (DSp) and sensitivity (DSe) estimates for the qPCR assays were compared to blood smear piroplasm results, and other PCR assays for T. orientalis. Copy number estimates of Ikeda DNA in blood were determined from cattle exhibiting anaemia using the Ikeda-specific qPCR assay. The T. orientalis type-specific and the HRM qPCR assays displayed 100% analytical specificity. The Ikeda-specific qPCR assay exhibited linearity (R(2) = 0.997) with an efficiency of 94.3%. Intra-assay CV were ≤0.08 and inter-assay CV were ≤0.095. For blood samples from cows with signs of infection with T. orientalis, the DSp and DSe of the multiplex probe qPCR assay were 93 and 96%, respectively compared with blood smears, and 97 and 100%, respectively compared with conventional PCR assays. For the Ikeda-specific qPCR assay, the number of positive samples (n=66) was slightly higher than a conventional PCR assay (n=64). The concentration of Ikeda genomes in blood samples from 41 dairy cows with signs of infection with T. orientalis ranged between 5.6 × 10(4) and 3.3 × 10(6) genomes per

Predicting Impacts of Future Climate Change on the Distribution of the Widespread Conifer Platycladus orientalis.

Directory of Open Access Journals (Sweden)

Xian-Ge Hu

Full Text Available Chinese thuja (Platycladus orientalis has a wide but fragmented distribution in China. It is an important conifer tree in reforestation and plays important roles in ecological restoration in the arid mountains of northern China. Based on high-resolution environmental data for current and future scenarios, we modeled the present and future suitable habitat for P. orientalis, evaluated the importance of environmental factors in shaping the species' distribution, and identified regions of high risk under climate change scenarios. The niche models showed that P. orientalis has suitable habitat of ca. 4.2×106 km2 across most of eastern China and identified annual temperature, monthly minimum and maximum ultraviolet-B radiation and wet-day frequency as the critical factors shaping habitat availability for P. orientalis. Under the low concentration greenhouse gas emissions scenario, the range of the species may increase as global warming intensifies; however, under the higher concentrations of emissions scenario, we predicted a slight expansion followed by contraction in distribution. Overall, the range shift to higher latitudes and elevations would become gradually more significant. The information gained from this study should be an useful reference for implementing long-term conservation and management strategies for the species.

Analytical characteristics of olive oils produced by two different extraction techniques, in Portuguese olive variety 'Galega Vulgar'

Directory of Open Access Journals (Sweden)

Vaz-Freire, Luís

2008-09-01

Full Text Available A metal hammer-decanter (HD olive processing line was compared to a traditional metal hammer-press (HP line, a discontinuous method which, when properly used, yields high-quality virgin olive oils. Galega olives (traditional Portuguese variety were used. Olives were picked at a predetermined maturation stage and plagues and oil content were evaluated before processing. Years, extraction technology, data replicates, and years*extraction, were taken into account and compared using statistical treatment. In spite of significant differences among the results obtained, only acidity was statistically significant and sufficient for classifying the produced olive oil into a lampante category.Se han comparado dos líneas de procesamiento de aceite, utilizando un sistema de prensas (SP o un decantador centrífugo (DC. El procesamiento que recurre al sistema de prensas es un sistema discontinuo que, sin embargo permite obtener aceites vírgenes de gran calidad. Para este estudio se ha utilizado la variedad Portuguesa Galega común. Las aceitunas fueron tratadas contra el ataque de plagas, y recogidas en un punto de maduración predeterminado. Del mismo modo, se evaluó el porcentaje de aceite obtenido de la cosecha. Se han considerado los resultados analíticos teniendo en cuenta la determinación de la influencia de la extracción en el producto final. Este punto ha sido evaluado por medio de un tratamiento estadístico. Aunque se han observado diferencias significativas entre los resultados de algunos de los parámetros analizados, sólo las diferencias verificadas en el grado de acidez son susceptibles de modificar la clasificación final del aceite, situándolo en la categoría lampante.

Some aspects of entomological determinants of Phlebotomus orientalis in highland and lowland visceral leishmaniasis foci in northwestern Ethiopia.

Directory of Open Access Journals (Sweden)

Esayas Aklilu

Full Text Available Visceral leishmaniasis (VL is one of the major public health problems in northwest Ethiopia, mainly in Libo-Kemkem and Metema districts, where Phlebotomus orientalis is the most probable vector of the disease. The aim of this study was to determine the physiological age, host preference and vectorial potential of P. orientalis in the highland and lowland foci of the region. Sand flies were collected using CDC light traps between May 2011 and April 2012 in Libo-Kemkem and October 2012 and September 2013 in Metema from household compounds, farm field and mixed forest. Females belonging to Phlebotomus were dissected for physiological age determination and Leishmania detection and isolation. Leishmania infections in sand flies were investigated using molecular methods. Freshly fed Phlebotomus females were tested to identify blood meal sources using PCR-RLB and ELISA. A total of 1149 (936 from Libo-Kemkem and 213 from Metema blood unfed female P. orientalis were dissected for age determination. The parity rate was 45.6% and 66.2% in Libo-Kemkem and Metema, respectively. None of 798 female P. orientalis dissected (578 from Libo-Kemkem and 220 from Metema was infected with Leishmania parasites. A total of 347 P. orientalis specimens collected from Libo-Kemkem were processed using PCR, of which 10 (2.8% specimens were found with DNA of Leishmania spp. Of a total 491 freshly fed female P. orientalis analyzed for blood meal origins by RLB-PCR and ELISA, 57.6% (67.8% from Libo-Kemkem and 49.8% from Metema were found to contain bovine blood while 4.9% (3.7% from Libo-Kemkem and 5.7% from Metema were of human blood. In conclusion, the present study showed parity difference between the two populations of P. orientalis and that both populations have strong zoophilic behavior. Based on the presented evidences, the species is strongly implicated as a vector of kala-azar in both areas. Therefore, vector control should be a component of a strategy to manage

Mechanical transfer of Theileria orientalis: possible roles of biting arthropods, colostrum and husbandry practices in disease transmission.

Science.gov (United States)

Hammer, Jade Frederick; Jenkins, Cheryl; Bogema, Daniel; Emery, David

2016-01-22

The intracellular protozoal parasite Theileria orientalis has rapidly spread across South-eastern Australia, substantially impacting local cattle industries since 2006. Haemaphysalis longicornis appears to be a biological vector in the endemic regions. Mechanical transfer of blood by biting arthropods, in colostrum or iatrogenic transmission though husbandry procedures is another possible mode of transmission. This study assesses the risk of these mechanical modes of transmission. Blood was collected from a T. orientalis Ikeda positive Angus steer, and was inoculated into the jugular vein of 9 calves in 3 treatment groups, each with 3 animals. Calves in Group 1 received 10 ml of cryopreserved blood, while those in Groups 2 and 3 received 1 ml (fresh blood) and 0.1 ml (cryopreserved), respectively. An additional three animals remained as negative controls and the donor calf was also followed as a positive control. Blood was collected over 3 months, and analysed via qPCR for the presence of the parasite. Samples of the sucking louse Linognathus vituli were collected opportunistically from calves 5 months after inoculation and tested for T. orientalis. For the colostral transmission study, 30 samples of blood and colostrum were collected from cows at calving in an endemic herd. These samples along with blood from their calves were tested by qPCR for T. orientalis and for antibodies to the major piroplasm surface protein (MPSP). Eight of the nine inoculated calves became positive for T. orientalis. The prepatent period of these infections was inversely correlated with inoculation dose. All negative control calves remained negative and the positive control calf remained positive. Samples of L. vituli tested positive for T. orientalis Ikeda, while some samples of colostrum were also shown to be qPCR and anti-MPSP positive. All calves in the colostral study tested qPCR negative although one was antibody-positive. T. orientalis is capable of being mechanically transferred

Recombinant Salivary Proteins of Phlebotomus orientalis are Suitable Antigens to Measure Exposure of Domestic Animals to Sand Fly Bites.

Science.gov (United States)

Sima, Michal; Ferencova, Blanka; Warburg, Alon; Rohousova, Iva; Volf, Petr

2016-03-01

Certain salivary proteins of phlebotomine sand flies injected into the host skin during blood-feeding are highly antigenic and elicit strong antibody-mediated immune responses in repeatedly-exposed hosts. These antibodies can be measured by enzyme-linked immuno sorbent assays (ELISAs) using salivary gland homogenates (SGHs) as the source of antigens and serve as a markers for exposure to biting sand flies. Large-scale screening for anti-sand fly saliva antibodies requires replacement of SGH with recombinant salivary proteins. In East Africa, Phlebotomus orientalis is the main vector of Leishmania donovani, a trypanosomatid parasite causing visceral leishmaniasis. We tested recombinant salivary proteins derived from Ph. orientalis saliva to study exposure of domestic animals to this sand fly species. Antigenic salivary proteins from Ph. orientalis were identified by immunoblot and mass spectrometry. Recombinant apyrase rPorSP15, yellow-related protein rPorSP24, ParSP25-like protein rPorSP65, D7-related protein rPorSP67, and antigen 5-related protein rPorSP76 were tested using ELISA with sera of domestic animals from L. donovani foci in Ethiopia where Ph. orientalis is present. Our results highlighted recombinant yellow-related protein rPorSP24 as the most promising antigen, displaying a high positive correlation coefficient as well as good sensitivity and specificity when compared to SGH. This recombinant protein was the most suitable one for testing sera of dogs, sheep, and goats. In addition, a different antigen, rPorSP65 was found efficacious for testing canine sera. Recombinant salivary proteins of Ph. orientalis, specifically rPorSP24, were shown to successfully substitute SGH in serological experiments to measure exposure of domestic animals to Ph. orientalis, the vector of L. donovani. The results suggest that rPorSP24 might be a suitable antigen for detecting anti-Ph. orientalis antibody-mediated reactions also in other host species.

Seasonal N changes in alnus orientalis and populus nigra and N2 fixation by exotic alder species in Syria

International Nuclear Information System (INIS)

Kurdali, F.

2002-01-01

Two experiments were conducted.The first was to study nodulation and N 2 fixation of several introduced alder species (Alnus glutinosa, A. incana, A. rubra and A. viridis) grown in soil from beneath Alnus orientalis. The second was to determine pattern of N changes in leaves and bark of Alnus orientalis and populus nigra natural stands during two successive years. Results showed that frankia in soil from underneath Alnus orientalis nodulated and fixed nitrogen on roots of local alder as well as on roots of introduced alder species from distant and ecologically diverse localities. However, differences were found among species in the number of nodules formed and amount of nitrogen fixed. Percentages of nitrogen derived from atmosphere (%Ndfa) ranged from 5% in A.viridis to 66% in A. orientalis. Microscopic study of Alnus orientalis nodules showed the presence of vesicles, and frankia belonging to Sp-type. Foliar N concentration was higher in alder than in poplar. Total N concentration in alder leaves remained relatively constant at about 3% during summer, whereas N concentration in poplar decreased sharply in leaves and increased in bark. No substantial increase in N concentration was found in alder bark, and the fallen leaves were rich in nitrogen. During autumn, leaf N concentration in poplar decreased by 43% and 51% for the first and the second year, respectively, whereas N concentrations in bark increased by 71% and 100%. Total N concentrations in alder leaves decreased only by 8-16% while, values in the adjacent bark remained stable. In contrast to poplar, it seems that Alnus orientalis does not exhibit net leaf retranslocation to bark tissues.(author)

EPG monitoring of the probing behaviour of the common brown leafhopper Orosius orientalis on artificial diet and selected host plants

NARCIS (Netherlands)

Trebicki, P.; Tjallingii, W.F.; Harding, R.M.; Rodoni, B.C.; Powell, K.S.

2012-01-01

The common brown leafhopper Orosius orientalis (Hemiptera: Cicadellidae) is a polyphagous vector of a range of economically important pathogens, including phytoplasmas and viruses, which infect a diverse range of crops. Studies on the plant penetration behaviour by O. orientalis were conducted using

Studies on sand fly fauna and ecological analysis of Phlebotomus orientalis in the highland and lowland foci of kala-azar in northwestern Ethiopia.

Directory of Open Access Journals (Sweden)

Esayas Aklilu

Full Text Available Visceral leishmaniasis (VL also known as kala-azar is a growing health problem in Ethiopia with an estimated annual VL incidence between 3700 and 7400. The disease is mainly endemic in northwestern parts of the country. The aim of the current study was to determine the sand fly fauna and ecology of Phlebotomus orientalis in two endemic and ecologically distinct areas of northwestern Ethiopia.Sand flies were collected using CDC light traps, sticky traps and pyrethrum spray catches from peri-domestic, mixed forest, farm field and indoor habitats from both Libo-Kemkem (May 2011-April 2012 and Metema (October 2012-September 2013 districts.A total of 51,411 sand fly specimens were collected and identified (10,776 from highland and 40, 635 from the lowland areas. Seven species were found in the highland area: two Phlebotomus spp. (P. orientalis and P. rodhaini and five Sergentomyia species. Whereas 19 species were found in the lowland area: six Phlebotomus (P. orientalis, P. rodhaini, P. bergeroti, P. duboscqi, P. papatasi and P. martini and 13 Sergentomyia species. Of the Phlebotomus spp., P. orientalis was the predominant species in both the highland (99.9% and lowland (93.7% areas. Indoor collections using pyrethrum spray catches and sticky traps indicated that P. orientalis has a strong exophilic and exophagic behaviors in both districts. In both areas, this species showed seasonal occurrence and showing abundance during the dry months (March-May/June of the year and increasing in numbers till the rain season, when numbers dropped dramatically. Mean density of P. orientalis in the two areas had positive and significant correlation with mean temperature in light trap collections (P0.05. Regarding the rainfall pattern, density of P. orientalis had negative and statistically insignificant correlation (for light trap collections for both areas and significant correlation (for sticky trap collections for lowland area.The current study indicated the

Composition and Biological Activity of Picea pungens and Picea orientalis Seed and Cone Essential Oils.

Science.gov (United States)

Wajs-Bonikowska, Anna; Szoka, Łukasz; Karna, Ewa; Wiktorowska-Owczarek, Anna; Sienkiewicz, Monika

2017-03-01

The increasing consumption of natural products lead us to discover and study new plant materials, such as conifer seeds and cones, which could be easily available from the forest industry as a waste material, for their potential uses. The chemical composition of the essential oils of Picea pungens and Picea orientalis was fully characterized by GC and GC/MS methods. Seed and cone oils of both tree species were composed mainly of monoterpene hydrocarbons, among which limonene, α- and β-pinene were the major, but in different proportions in the examined conifer essential oils. The levorotary form of chiral monoterpene molecules was predominant over the dextrorotary form. The composition of oils from P. pungens seeds and cones was similar, while the hydrodistilled oils of P. orientalis seeds and cones differed from each other, mainly by a higher amount of oxygenated derivatives of monoterpenes and by other higher molar mass terpenes in seed oil. The essential oils showed mild antimicrobial action, however P. orientalis cone oil exhibited stronger antimicrobial properties against tested bacterial species than those of P. pungens. Effects of the tested cone essential oils on human skin fibroblasts and microvascular endothelial cells (HMEC-1) were similar: in a concentration of 0 - 0.075 μl/ml the oils were rather safe for human skin fibroblasts and 0 - 0.005 μl/ml for HMEC-1 cells. IC 50 value of Picea pungens oils was 0.115 μl/ml, while that of Picea orientalis was 0.105 μl/ml. The value of IC 50 of both oils were 0.035 μl/ml for HMEC-1 cells. The strongest effect on cell viability had the oil from Picea orientalis cones, while on DNA synthesis the oil from Picea pungens cones. © 2017 Wiley-VHCA AG, Zurich, Switzerland.

In vitro antiplasmodial activity and prophylactic potentials of extract and fractions of Trema orientalis (Linn.) stem bark.

Science.gov (United States)

Olanlokun, John Oludele; David, Oluwole Moses; Afolayan, Anthony Jide

2017-08-15

Trema orientalis (T. orientalis Linn) has been used in the management of malaria in the western part of Nigeria and despite its application in ethnomedicine, there is dearth of scientific evidence to justify the acclaimed prophylactic antimalarial usage of the plant. The aim of this study is to assess the in vitro antiplasmodial cell-free assay and chemopreventive efficacy of the methanol extract of the stem bark of T. orientalis and its fractions as a prophylactic regimen for malaria prevention. Also, the antimicrobial activities of the extract and the fractions were investigated. Vacuum liquid chromatography was used to obtain dichloromethane, ethylacetate and methanol fractions from the methanol extract of T. orientalis. The fractions were tested for their prophylactic and cell-free antimalarial activity using murine models and β-hematin formation assay respectively. Disc diffusion method was used to determine the antibacterial activity of the extract and its fractions against both Gram-positive and Gram-negative bacteria. In the prophylactic experiment, dichloromethane (DCMF), methanol fraction (MF) and extract (ME) (in this order) showed significant chemopreventive effects against P. berghei invasion of the red blood cells when compared with both Sulfadoxine-Pyrimethamine (SP) and untreated controls. Results of the in vitro study showed that the DCMF had the highest effect in preventing the formation of β-hematin when compared with other fractions. The DCMF also had the highest percentage inhibition of β-hematin formation when compared with chloroquine. The extract and fractions showed a concentration dependent antibacterial activity. Methanol extract had a pronounced inhibitory effect on Enterobacter cloaca ATCC 13047 and Enterococcus faecalis ATCC 29212. Serratia mercescens ATCC 9986 and Pseudomonas aeruginosa ATCC 19582 were the most susceptible bacteria. The results obtained showed that both extract and fractions of T. orientalis possessed

Chemical composition of the essential oil of Nigella orientalis L. seeds

Czech Academy of Sciences Publication Activity Database

Kokoška, L.; Havlík, J.; Valterová, Irena; Nepovím, Aleš; Rada, V.; Vaněk, Tomáš

2005-01-01

Roč. 20, - (2005), s. 419-420 ISSN 0882-5734 R&D Projects: GA ČR(CZ) GA525/02/0257 Institutional research plan: CEZ:AV0Z4055905 Keywords : Nigella orientalis L. * ranunculaceae * essential oil composition Subject RIV: CC - Organic Chemistry Impact factor: 0.718, year: 2005

Clinical haematology and biochemistry profiles of cattle naturally infected with Theileria orientalis Ikeda type in New Zealand.

Science.gov (United States)

Lawrence, K E; Forsyth, S F; Vaatstra, B L; McFadden, Amj; Pulford, D J; Govindaraju, K; Pomroy, W E

2018-01-01

To present the haematology and biochemistry profiles for cattle in New Zealand naturally infected with Theileria orientalis Ikeda type and investigate if the results differed between adult dairy cattle and calves aged cattle which tested positive for T. orientalis Ikeda type by PCR, that were submitted to veterinary laboratories in New Zealand between October 2012 and November 2014. Data sets for haematology and biochemistry results were prepared for adult dairy cattle (n=62 and 28, respectively) and calves aged cattle and calves cattle than for beef or dairy calves, for both haematology (pcattle and calves aged cattle infected with T. orientalis Ikeda type were consistent with extravascular haemolytic anaemia. Adult dairy cattle were more likely to be severely anaemic than calves. There were differences in haematology and biochemistry profiles between adult dairy cattle and calves, but most of these differences likely had a physiological rather than pathological basis. Overall, the haematological changes in calves aged cattle.

Pharmacological and phytochemical screening of Palestinian traditional medicinal plants Erodium laciniatum and Lactuca orientalis.

Science.gov (United States)

Jaradat, Nidal; AlMasri, Motasem; Zaid, Abdel Naser; Othman, Dua'a Ghazi

2017-09-01

Various epidemiological studies showed that herbal remedies containing polyphenols may protect against various diseases such as cancers, vascular diseases and inflammatory pathologies. Currently, such groups of bioactive compounds have become a subject of many antimicrobials and antioxidant investigations. Accordingly, the current study aimed to conduct biological and phytochemical screening for two Palestinian traditional medicinal plants, Erodium laciniatum and Lactuca orientalis. Current plants phytoconstituents and their antioxidant activities were evaluated by using standard phytochemical methods; meanwhile, antimicrobial activities were estimated by using several types of American Type Culture Collection and multidrug resistant clinical isolates by using agar diffusion well-variant, agar diffusion disc-variant and broth microdilution methods. Phytochemical screenings showed that L. orientalis and E. laciniatum contain mixtures of secondary and primary metabolites Moreover, total flavonoid, tannins and phenols content in E. laciniatum extract were higher than the L. orientalis extracts with almost the same antioxidant potentials. Additionally, both plants organic and aqueous extracts showed various potentials of antimicrobial activity Conclusions: Overall, the studied species have a mixture of phytochemicals, flavonoids, phenols and tannins also have antioxidant and antimicrobial activities which approved their folk uses in treatments of infectious and Alzheimer diseases and simultaneously can be used as therapeutic agents in the pharmaceutical industries.

Evaluation of effects of photooxidized Vespa orientalis venom on memory and learning in rats

Directory of Open Access Journals (Sweden)

H Mukund

2011-01-01

Full Text Available Wasp venom is mixture of complex proteins that have several physical and pharmacological properties. The photochemical detoxification of Vespa orientalis venom is expected to generate photooxidized venom sac extract (PVSE. Antigenically active PVSE is obtained by exposing the venom sac extract (VSE of Vespa orientalis to ultraviolet radiation in the presence of methylene blue. The aim of the present work was to evaluate the effect of PVSE on learning and memory of rats. Detoxification of PVSE was evident since treated mice had longer survival time than the group of mice treated with VSE. Photooxidized VSE of V. orientalis revealed enhancement on learning and memory by shortening the time to reach food (TRF in T-maze. In a 28-day study with rats, we observed that PVSE significantly decreased transfer latency (TL in elevated plus maze (EPM, significantly increased step down latency (SDL, diminished step down errors (SDE and time spent in shock zone (TSS in step down avoidance test. Thus, we concluded that although there is a possibility of employing PVSE in the treatment of Alzheimer, dementia or neurodegenerative illness as a non-herbal and non-synthetic alternative for patients who do not respond to available therapy, further investigation is still required.

Ocorrência de Halysidota orientalis Rothschild (Lepidoptera: Arctiidae) em amoreira (Morus alba L.) no Estado de São Paulo

OpenAIRE

Sánchez-Soto, Saúl; Romano, Fabiana C.B.; Nakano, Octavio

2004-01-01

É registrada pela primeira vez a ocorrência de lagartas de Halysidota orientalis Rothschild em plantas de amoreira (Morus alba L.) no estado de São Paulo. Alguns aspectos da morfologia externa do adulto, larva e pupa são descritos. The occurrence of larvae of Halysidota orientalis Rothschild on mulberry plants (Morus alba L.) is recorded for the first time in São Paulo, Brazil. Morphological aspects of adult, larva and pupa are described.

Muscular system in the pacific bluefin tuna Thunnus orientalis (Teleostei: Scombridae).

Science.gov (United States)

Nakae, Masanori; Sasaki, Kunio; Shinohara, Gento; Okada, Tokihiko; Matsuura, Keiichi

2014-02-01

The muscular system in the Pacific bluefin tuna Thunnus orientalis is studied in detail. For the first time, a complete description of the muscular anatomy of a thunnid is provided here. Eighty-two elements including subdivisions of components of the muscular system are identified. This is less than found in a basal perciform and two other investigated scombrid species, owing mainly to the absence or fusion of pectoral, pelvic and caudal fin muscles. The absence of elements of the basal perciform pattern was most prominent in the caudal fin, which includes only the flexor dorsalis, flexor ventralis, hypochordal longitudinalis, and interradialis. In the caudal fin, the medial fan-shaped ray was identified as the first dorsal ray, judging from myological and neuroanatomical characters. The highly developed gill filament muscles in Thunnus orientalis and sheet-like rectus communis control gill ventilation. Long body muscle tendons reduce the metabolic energy needed during rapid and continuous swimming. These characters are interpreted as adaptations in the context of the oceanic life style of the species. Copyright © 2013 Wiley Periodicals, Inc.

Bunias orientalis L. as a natural overwintering host OF Turnip mosaic virus

Directory of Open Access Journals (Sweden)

Tadeusz Kobyłko

2012-12-01

Full Text Available A virus was isolated, using mechanical inoculation, from hill mustard (Bunias orientalis L. plants exhibiting yellow mottling and blistering on leaves, which were frequently accompanied by asymmetric leaf narrowing. It systemically infected certain plants from the family Brassicaceae (Brassica rapa, Bunias orientalis, Hesperis matronalis, Sinapis alba as well as Cleome spinosa and Nicotiana clevelandii, and locally Atriplex hortensis, Chenopodium quinoa, Ch. amaranticolor, N. tabacum. In the sap, it maintained infectivity for 3-4 days and lost it after heating for 10 min. at a temperature of 55 - 60oC or when diluted with water at 10-3. Virus particles were thread- like with a length of 675 - 710 nm. Based on an analysis of biological properties of the pathogen, serological response, particle morphology and data from field observations, it was identified as an isolate of Turnip mosaic virus (TuMV, and hill mustard was recognised as a natural overwintering host for this pathogen.

Monitoring Theileria orientalis (Ikeda)-associated bovine anaemia in affected cattle over time.

Science.gov (United States)

McFadden, Amj; Hart, M; Bueno, I M; Ha, H J; Heath, Acg; Pulford, D J

2017-10-15

The aim of the study was to observe changes in haematocrit (HCT) over time in a New Zealand South Island dairy herd affected by an outbreak of Theileria-associated bovine anaemia (TABA; Ikeda). A secondary aim was to relate individual cow HCTs to the amount of Theileria orientalis Ikeda DNA present in the blood, as measured by cycle threshold values, using a quantitative PCR (qPCR). Over a 6 month period, blood samples from 19 randomly selected cattle were monitored from a herd of 600 dairy cows. The sampling interval was approximately fortnightly for the first six weeks, followed by sampling at between four and six week intervals. At the initial report of the outbreak, two from six cattle were anaemic (HCTcattle 11 days later showed that 57% (95% CI 33-77%) of the cattle sampled were anaemic. Of the 19 cattle that went on to be monitored, 12 (63% 95% CI=41-81%) developed anaemia at some point during the period of monitoring. One of the anaemic animals did not meet the case definition for TABA Ikeda. For individual cattle, the average number of days between when cattle were first detected as anaemic and when HCT returned to normal was 53days (median=47 days, range=6-92 days). At the point of notification the amount of T. orientalis Ikeda DNA in the blood of the six cattle tested was low (Cq median=36), but 11days later the amount of DNA in blood of 14 additional cows tested was relatively high (Cq median=24). Levels of all 19 cows monitored continued to remain moderately high through the period of testing (Cq median=29). This was despite a general improvement in the HCT of affected cattle. In four of the 15 cattle positive to T. orientalis Ikeda where blood fractions (plasma and whole blood) were tested, it appeared that T. orientalis Ikeda (as measured by qPCR) dropped more rapidly in plasma fractions than in whole blood at the point that HCT started to return to normal levels. Despite the assumption that tick populations were low in the Canterbury region of the

PROCESS FOR THE PRODUCTION OF DISSOLVING PULP FROM TREMA ORIENTALIS (NALITA) BY PREHYDROLYSIS KRAFT AND SODA-ETHYLENEDIAMINE (EDA) PROCESS

OpenAIRE

M. A. Quaiyyum; A. Noori; Labooni Ahsan; M. Sarwar Jahan

2008-01-01

This paper presents a preliminary study for the production of dissolving pulp from Trema orientalis (Nalita). Water prehydrolysis kraft and soda-ethylenediamine (EDA) pulping for the production of dissolving pulp from T. orientalis was investigated. Prehydrolysis at 150 and 170 oC did not produce pulp with high α-cellulose content when using the kraft process. But addition of 0.25 % H2SO4 in prehydrolysis liquor increased the purity of the pulp with the sacrifice of pulp yield and viscosity. ...

Unexpected presence of Fagus orientalis complex in Italy as inferred from 45,000-year-old DNA pollen samples from Venice lagoon.

Science.gov (United States)

Paffetti, Donatella; Vettori, Cristina; Caramelli, David; Vernesi, Cristiano; Lari, Martina; Paganelli, Arturo; Paule, Ladislav; Giannini, Raffaello

2007-08-16

Phylogeographic analyses on the Western Euroasiatic Fagus taxa (F. orientalis, F. sylvatica, F. taurica and F. moesiaca) is available, however, the subdivision of Fagus spp. is unresolved and there is no consensus on the phylogeny and on the identification (both with morphological than molecular markers) of Fagus Eurasiatic taxa. For the first time molecular analyses of ancient pollen, dated at least 45,000 years ago, were used in combination with the phylogeny analysis on current species, to identify the Fagus spp. present during the Last Interglacial period in Italy. In this work we aim at testing if the trnL-trnF chloroplast DNA (cpDNA) region, that has been previously proved efficient in discriminating different Quercus taxa, can be employed in distinguishing the Fagus species and in identifying the ancient pollen. 86 populations from 4 Western Euroasistic taxa were sampled, and sequenced for the trnL-trnF region to verify the efficiency of this cpDNA region in identifying the Fagus spp.. Furthermore, Fagus crenata (2 populations), Fagus grandifolia (2 populations), Fagus japonica, Fagus hayatae, Quercus species and Castanea species were analysed to better resolve the phylogenetic inference. Our results show that this cpDNA region harbour some informative sites that allow to infer relationships among the species within the Fagaceae family. In particular, few specific and fixed mutations were able to discriminate and identify all the different Fagus species. Considering a short fragment of 176 base pairs within the trnL intron, 2 transversions were found able in distinguishing the F. orientalis complex taxa (F. orientalis, F. taurica and F. moesiaca) from the remaining Fagus spp. (F. sylvatica, F. japonica, F. hayataea, F. crenata and F. grandifolia). This permits to analyse this fragment also in ancient samples, where DNA is usually highly degraded. The sequences data indicate that the DNA recovered from ancient pollen belongs to the F. orientalis complex since

Platycladus orientalis leaves: a systemic review on botany, phytochemistry and pharmacology.

Science.gov (United States)

Shan, Ming-Qiu; Shang, Jing; Ding, An-Wei

2014-01-01

Platycladus orientalis leaves (Cebaiye) have been used for thousands of years as traditional Chinese medicine (TCM). According to the theory of TCM, they are categorized as a blood-cooling and hematostatic herb. In clinical practice, they were usually prescribed with heat-clearing herbs to reinforce the efficacy of hemostasis. The review provides the up-to-date information from 1980 to present that is available on the botany, processing research, phytochemistry, pharmacology and toxicology of the leaves. The information is collected from scientific journals, books, theses and reports via library and electronic search (Google Scholar, Pubmed and CNKI). Through literature reports, we can find that the leaves show a wide spectrum of pharmacological activities, such as anti-inflammatory, antioxidant, antimicrobial, disinsection, anticancer, diuretic, hair growth-promoting, neuroprotective and antifibrotic activities. Diterpene and flavonoids would be active constituents in P. orientalis leaves. Many studies have provided evidence for various traditional uses. However, there is a great need for additional studies to elucidate the mechanism of blood-cooling and hematostatic activity of the leaves. Therefore, the present review on the botany, traditional uses, phytochemistry and toxicity has provided preliminary information for further studies of this herb.

Caracterización y optimización de las operaciones de procesado y conservación de la berza gallega ("Brassica oleracea" L. var. "acephala" cv. Galega)

OpenAIRE

Armesto Barge, Jorge

2017-01-01

El cultivo de la berza gallega (Brassica oleracea var. acephala cv. Galega) está ampliamente distribuido por todo el noroeste de España, formando esta hortaliza parte importante de la dieta tradicional de la población. Se cultivan y comercializan dos fenotipos diferenciados, uno de hoja rizada y otro de hoja lisa, cuyas características y diferencias composicionales se encuentran todavía por estudiar. Este vegetal se consume siempre tras un proceso de cocción que repercute de forma directa o i...

Molecular detection and genetic diversity of bovine Babesia spp., Theileria orientalis, and Anaplasma marginale in beef cattle in Thailand.

Science.gov (United States)

Jirapattharasate, Charoonluk; Adjou Moumouni, Paul Franck; Cao, Shinuo; Iguchi, Aiko; Liu, Mingming; Wang, Guanbo; Zhou, Mo; Vudriko, Patrick; Efstratiou, Artemis; Changbunjong, Tanasak; Sungpradit, Sivapong; Ratanakorn, Parntep; Moonarmart, Walasinee; Sedwisai, Poonyapat; Weluwanarak, Thekhawet; Wongsawang, Witsanu; Suzuki, Hiroshi; Xuan, Xuenan

2017-02-01

Babesia spp., Theileria orientalis, and Anaplasma marginale are significant tick-borne pathogens that affect the health and productivity of cattle in tropical and subtropical areas. In this study, we used PCR to detect the presence of Babesia bovis, Babesia bigemina, and T. orientalis in 279 beef cattle from Western Thailand and A. marginale in 608 beef cattle from the north, northeastern, and western regions. The PCRs were performed using species-specific primers based on the B. bovis spherical body protein 2 (BboSBP2), B. bigemina rhoptry-associated protein 1a (BbiRAP-1a), T. orientalis major piroplasm surface protein (ToMPSP), and A. marginale major surface protein 4 (AmMSP4) genes. To determine the genetic diversity of the above parasites, amplicons of B. bovis and B. bigemina ITS1-5.8s rRNA gene-ITS2 regions (B. bovis ITS, B. bigemina ITS), ToMPSP, and AmMSP4 genes were sequenced for phylogenetic analysis. PCR results revealed that the prevalence of B. bovis, B. bigemina, T. orientalis, and A. marginale in the Western region was 11.1, 12.5, 7.8, and 39.1 %, respectively. Coinfections of two or three parasites were observed in 17.9 % of the animals sampled. The study revealed that the prevalence of A. marginale in the western region was higher than in the north and northeastern regions (7 %). Sequence analysis showed the BboSBP2 gene to be more conserved than B. bovis ITS in the different isolates and, similarly, the BbiRAP-1a was more conserved than B. bigemina ITS. In the phylogenetic analysis, T. orientalis MPSP sequences were classified into types 3, 5, and 7 as previously reported. A. marginale MSP4 gene sequences shared high identity and similarity with each other and clustered with isolates from other countries. This study provides information on the prevalence and genetic diversity of tick-borne pathogens in beef cattle and highlights the need for effective strategies to control these pathogens in Thailand.

The effect of cutting times on goat’s rue (Galega orientalis Lam. leys

Directory of Open Access Journals (Sweden)

Perttu Virkajärvi

1991-12-01

Full Text Available The effect of four different cutting times, both in spring and autumn, on goat’s rue was studied at Viikki Experimental farm of the University of Helsinki in 1983—89. Goat’s rue showed good persistence. The plots remained in good condition, the average yield being even in the sixth year 9000 kg DM per hectare. The development of goat’s rue starts early in the spring. The growth rate and development of CP content are similar to those of red clover. The development of CF is, however, more similar to grasses. Thus, the crude fiber content limits the cutting times of goat’s rue more than the changes in crude protein content. The most suitable cutting time in spring is at the beginning of flowering in mid-June, and in autumn during the second week of September. With this management a yield of 8360 kg DM per hectare per year was reached during the experimental years. The pooled CP content was 19.9 % and the CP yield was 1660 kg/ha. The CF content was in the first cut 27.9 % and in the second cut 29.1 %. The amount of weeds in the five to six year leys was 12—18 %.

Nutrient enrichment effects on photosynthesis in the wetland plants Typha orientalis and Phormium tenax

DEFF Research Database (Denmark)

Sorrell, Brian Keith; Brix, Hans; Tanner, Chris

-growing species raupo (Typha orientalis) and slower-growing flax (Phormium tenax). Photosynthesis was compared between 9 field locations differing in nutrient availability where the two species co-existed, and in an outdoor growth experiment. Raupo accumulated higher concentrations of nitrogen (N) and especially...

Redescription de l'holotype de Ephemera orientalis Mclachlan, 1875 (Insecta, Ephemeroptera)

NARCIS (Netherlands)

Demoulin, G.

1965-01-01

En 1875, R. McLachlan décrivit Ephemera orientalis d'après un unique exemplaire ♂, capturé au Japon par P. F. von Siebold. Depuis lors, l'espèce a été signalée à nouveau, non seulement du Japon, mais de Sibérie orientale, et ce par divers auteurs. Mais aucune iconographie n'en a été donnée. En 1952,

Pseudomonas orientalis F9: A Potent Antagonist against Phytopathogens with Phytotoxic Effect in the Apple Flower

Directory of Open Access Journals (Sweden)

Veronika Zengerer

2018-02-01

Full Text Available In light of public concerns over the use of pesticides and antibiotics in plant protection and the subsequent selection for spread of resistant bacteria in the environment, it is inevitable to broaden our knowledge about viable alternatives, such as natural antagonists and their mode of action. The genus Pseudomonas is known for its metabolic versatility and genetic plasticity, encompassing pathogens as well as antagonists. We characterized strain Pseudomonas orientalis F9, an isolate from apple flowers in a Swiss orchard, and determined its antagonistic activity against several phytopathogenic bacteria, in particular Erwinia amylovora, the causal agent of fire blight. P. orientalis F9 displayed antagonistic activity against a broad suite of phytopathogenic bacteria in the in vitro tests. The promising results from this analysis led to an ex vivo assay with E. amylovora CFBP1430Rif and P. orientalis F9 infected detached apple flowers. F9 diminished the fire blight pathogen in the flowers but also revealed phytotoxic traits. The experimental results were discussed in light of the complete genome sequence of F9, which revealed the strain to carry phenazine genes. Phenazines are known to contribute to antagonistic activity of bacterial strains against soil pathogens. When tested in the cress assay with Pythium ultimum as pathogen, F9 showed results comparable to the known antagonist P. protegens CHA0.

Pseudomonas orientalis F9: A Potent Antagonist against Phytopathogens with Phytotoxic Effect in the Apple Flower.

Science.gov (United States)

Zengerer, Veronika; Schmid, Michael; Bieri, Marco; Müller, Denise C; Remus-Emsermann, Mitja N P; Ahrens, Christian H; Pelludat, Cosima

2018-01-01

In light of public concerns over the use of pesticides and antibiotics in plant protection and the subsequent selection for spread of resistant bacteria in the environment, it is inevitable to broaden our knowledge about viable alternatives, such as natural antagonists and their mode of action. The genus Pseudomonas is known for its metabolic versatility and genetic plasticity, encompassing pathogens as well as antagonists. We characterized strain Pseudomonas orientalis F9, an isolate from apple flowers in a Swiss orchard, and determined its antagonistic activity against several phytopathogenic bacteria, in particular Erwinia amylovora , the causal agent of fire blight. P. orientalis F9 displayed antagonistic activity against a broad suite of phytopathogenic bacteria in the in vitro tests. The promising results from this analysis led to an ex vivo assay with E. amylovora CFBP1430 Rif and P. orientalis F9 infected detached apple flowers. F9 diminished the fire blight pathogen in the flowers but also revealed phytotoxic traits. The experimental results were discussed in light of the complete genome sequence of F9, which revealed the strain to carry phenazine genes. Phenazines are known to contribute to antagonistic activity of bacterial strains against soil pathogens. When tested in the cress assay with Pythium ultimum as pathogen, F9 showed results comparable to the known antagonist P. protegens CHA0.

Anatomia e histoquímica dos órgãos vegetativos de Siegesbeckia orientalis (Asteraceae Anatomy and histochemistry of the vegetative organs of Siegesbeckia orientalis (Asteraceae

Directory of Open Access Journals (Sweden)

D.B. Aguilera

2004-12-01

Full Text Available Descreveu-se a anatomia dos órgãos vegetativos de S. orientalis, em estrutura primária, enfatizando a caracterização e histoquímica de suas estruturas secretoras. Folhas, caules e raízes foram fixados em FAA50 e em sulfato ferroso e estocados em etanol 70%. Cortes transversais e longitudinais foram submetidos ao azul-de-toluidina pH 4,0, ao vermelho-de-rutênio, à reação de PAS, ao reativo Xylidine Ponceau, ao Sudan Black B e ao reativo Dragendorff. Anatomicamente, os órgãos vegetativos de S. orientalis são semelhantes aos caracteres descritos para Asteraceae. As raízes laterais são triarcas e o caule, um eustelo. Ductos estão ausentes na raiz e presentes no caule e na folha. Estas estruturas são de pequeno diâmetro, sendo delimitadas por quatro a cinco células epiteliais. No caule, os ductos estavam presentes no córtex, próximos à endoderme e na medula; nas folhas, associados aos feixes vasculares, tanto para o lado do xilema quanto para o do floema. As folhas são dorsiventrais e anfiestomáticas. Três tipos de estruturas secretoras foram observados: ductos, hidatódios e tricomas glandulares. Os testes histoquímicos aplicados demonstraram a presença de compostos fenólicos e alcalóides nos ductos e, nos tricomas, de compostos lipofílicos e fenólicos. Esses resultados indicam a complexidade da secreção produzida pelas estruturas secretoras na espécie.The anatomy of the vegetative organs of S. orientalis in primary structure was described, emphasizing the characterization and histochemistry of its secretory structures. Leaves, stems and roots were fixed in FAA50 and ferrous sulphate and stored in 70% ethanol. Cross and longitudinal sections were submitted to toluidine blue pH 4.0, ruthenium red, PAS reaction, Ponceau Xylidine reactive, Sudan Black B and Dragendorff reactive. Anatomically, S. orientalis vegetative organs are similar to the characters described for the Asteraceae. The lateral roots are triarches and

Evaluation of Fungal Deterioration in Liquidambar orientalis Mill. heartwood by FT-IR and light microscopy.

Science.gov (United States)

Nural Yilgor; Dilek Dogu; Roderquita Moore; Evren Terzi; S. Nami Kartal

2013-01-01

The chemical and morphological changes in heartwood specimens of Liquidambar orientalis Mill. caused by the white-rot fungus Trametes versicolor and the brown-rot fungi Tyromyces palustris and Gloeophyllum trabeum were studied by wet chemistry, FT-IR, GC-MS analyses, and photo-...

Second species of tree frog, Hyla orientalis (formely H. arborea) from Iran confirmed by acoustic data

Czech Academy of Sciences Publication Activity Database

Gvoždík, Václav

2010-01-01

Roč. 3, - (2010), s. 41-44 ISSN 2071-5773 R&D Projects: GA MŠk LC06073 Institutional research plan: CEZ:AV0Z50450515 Keywords : Hyla orientalis * Hyla savignyi * Distribution Subject RIV: EH - Ecology, Behaviour

Involvement of Acetobacter orientalis in the production of lactobionic acid in Caucasian yogurt ("Caspian Sea yogurt") in Japan.

Science.gov (United States)

Kiryu, T; Kiso, T; Nakano, H; Ooe, K; Kimura, T; Murakami, H

2009-01-01

Lactobionic acid was first found in a Caucasian fermented milk product popularly known as "Caspian Sea yogurt" in Japan. The presence of lactobionic acid in the fermented milk was indicated by the results of both high-performance anion-exchange chromatographic analysis with pulsed amperometric detection and mass spectrometric analysis. Thereafter, the acid was purified from the yogurt and analyzed by nuclear magnetic resonance. A substantial amount of lactobionic acid was found to be accumulated in the upper layer of the yogurt, especially within 10 mm from the surface. A total of 45 mg of lactobionic acid per 100 g of the upper yogurt layer was collected after 4 d of fermentation. The annual intake of lactobionic acid in individuals consuming 100 g of the yogurt every day would be 0.5 to 1.0 g. A lactose-oxidizing bacterium was isolated from the fermented milk and was identified as Acetobacter orientalis. Washed A. orientalis cells oxidized monosaccharides such as d-glucose at considerable rates, although their activities for substrates such as lactose, maltose, and cellobiose were much lower. When A. orientalis cells were cultivated in cow's milk, they exhibited lactose-oxidizing activity, suggesting that this bacterium was the main organism involved in the production of lactobionic acid in the yogurt.

The influence of moonlight and lunar periodicity on the efficacy of CDC light trap in sampling Phlebotomus (Larroussius) orientalis Parrot, 1936 and other Phlebotomus sandflies (Diptera: Psychodidae) in Ethiopia.

Science.gov (United States)

Gebresilassie, Araya; Yared, Solomon; Aklilu, Essayas; Kirstein, Oscar David; Moncaz, Aviad; Tekie, Habte; Balkew, Meshesha; Warburg, Alon; Hailu, Asrat; Gebre-Michael, Teshome

2015-02-15

Phlebotomus orientalis is the main sandfly vector of visceral leishmaniasis in the north and northwest of Ethiopia. CDC light traps and sticky traps are commonly used for monitoring sandfly populations. However, their trapping efficiency is greatly influenced by various environmental factors including moonlight and lunar periodicity. In view of that, the current study assessed the effect of moonlight and lunar periodicity on the performance of light traps in collecting P. orientalis. Trapping of P. orientalis and other Phlebotomus spp. was conducted for 7 months between December 2012 and June 2013 using CDC light traps and sticky traps from peri-domestic and agricultural fields. Throughout the trapping periods, collections of sandfly specimens were carried out for 4 nights per month, totaling 28 trapping nights that coincided with the four lunar phases (viz., first quarter, third quarter, new and full moon) distributed in each month. In total, 13,533 sandflies of eight Phlebotomus species (P. orientalis, P. bergeroti, P. rodhaini, P. duboscqi, P. papatasi, P. martini, P. lesleyae and P. heischi) were recorded. The predominant species was P. orientalis in both trapping sites and by both methods of collection in all lunar phases. A significant difference (P lunar phases. The highest mean number (231.13 ± 36.27 flies/trap/night) of P. orientalis was collected during the new moon phases, when the moonlight is absent. Fewer sandflies were attracted to light traps during a full moon. However, the number of P. orientalis and the other Phlebotomus spp. from sticky traps did not differ in their density among the four lunar phases (P = 0.122). Results of the current study demonstrated that the attraction and trapping efficiency of CDC light traps is largely influenced by the presence moonlight, especially during a full moon. Therefore, sampling of sandflies using light traps to estimate population density and other epidemiological studies in the field should take

Genetically modified yeast of the species Issatchenkia orientalis and closely relates species, and fermentation processes using same

Science.gov (United States)

Suominen, Pirkko [Maple Grove, MN; Aristidou, Aristos [Highland Ranch, CO; Pentilla, Merja [Helsinki, FI; Ilmen, Marja [Helsinki, FI; Ruohonen, Laura [Helsinki, FI; Koivuranta, Kari [Vantaa, FI; Roberg-Perez, Kevin [Minneapolis, MN

2012-01-17

Cells of the species Issatchenkia orientalis and closely related yeast species are transformed with a vector to introduce an exogenous lactate dehydrogenase gene. The cells produce lactic acid efficiently and are resistant at low pH, high lactate titer conditions.

Siegesbeckia orientalis Extract Inhibits TGFβ1-Induced Migration and Invasion of Endometrial Cancer Cells

Directory of Open Access Journals (Sweden)

Chi-Chang Chang

2016-08-01

Full Text Available Type II endometrial carcinoma typically exhibits aggressive metastasis and results in a poor prognosis. Siegesbeckia orientalis Linne is a traditional Chinese medicinal herb with several medicinal benefits, including the cytotoxicity against various cancers. This study investigates the inhibitory effects of S. orientalis ethanol extract (SOE on the migration and invasion of endometrial cancer cells, which were stimulated by transforming growth factor β (TGFβ. The inhibitory effects were evaluated by determining wound healing and performing the Boyden chamber assay. This study reveals that SOE can inhibit TGFβ1-induced cell wound healing, cell migration, and cell invasion in a dose-dependent manner in RL95-2 and HEC-1A endometrial cancer cells. SOE also reversed the TGFβ1-induced epithelial-mesenchymal transition, including the loss of the cell-cell junction and the lamellipodia-like structures. Western blot analysis revealed that SOE inhibited the phosphorylation of ERK1/2, JNK1/2, and Akt, as well as the expression of MMP-9, MMP-2, and u-PA in RL95-2 cells dose-dependently. The results of this investigation suggest that SOE is a potential anti-metastatic agent against human endometrial tumors.

Cluster analysis of the clinical histories of cattle affected with bovine anaemia associated with Theileria orientalis Ikeda type infection.

Science.gov (United States)

Lawrence, K E; Forsyth, S F; Vaatstra, B L; McFadden, Amj; Pulford, D J; Govindaraju, K; Pomroy, W E

2017-11-01

AIM To determine the most commonly used words in the clinical histories of animals naturally infected with Theileria orientalis Ikeda type; whether these words differed between cases categorised by age, farm type or haematocrit (HCT), and if there was any clustering of the common words in relation to these categories. METHODS Clinical histories were transcribed for 605 cases of bovine anaemia associated with T. orientalis (TABA), that were submitted to laboratories with blood samples which tested positive for T. orientalis Ikeda type infection by PCR analysis, between October 2012 and November 2014. χ 2 tests were used to determine whether the proportion of submissions for each word was similar across the categories of HCT (normal, moderate anaemia or severe anaemia), farm type (dairy or beef) and age (young or old). Correspondence analysis (CA) was carried out on a contingency table of the frequency of the 28 most commonly used history words, cross-tabulated by age categories (young, old or unknown). Agglomerative hierarchical clustering, using Ward's method, was then performed on the coordinates from the correspondence analysis. RESULTS The six most commonly used history words were jaundice (204/605), lethargic (162/605), pale mucous membranes (161/605), cow (151/605), anaemia (147/605), and off milk (115/605). The proportion of cases with some history words differed between categories of age, farm type and HCT. The cluster analysis indicated that the recorded history words were grouped in two main clusters. The first included the words weight loss, tachycardia, pale mucous membranes, anaemia, lethargic and thin, and was associated with adult (pcluster included the words deaths, ill-thrift, calves, calf and diarrhoea, and was associated with young (pCluster analysis of words recorded in clinical histories submitted with blood samples from cases of TABA indicates that two potentially different disease syndromes were associated with T. orientalis Ikeda type

Nickel affects gill and muscle development in oriental fire-bellied toad (Bombina orientalis) embryos

Energy Technology Data Exchange (ETDEWEB)

Park, Chan Jin; Song, Sang Ha; Kim, Dae Han; Gye, Myung Chan, E-mail: mcgye@hanyang.ac.kr

2017-01-15

Highlights: • Nickel inhibited the development of external gill in B. orientalis embryos. • The 168 h LC{sub 50} and EC{sub 50} values of nickel were 33.8 and 5.4 μM, respectively, in embryos. • Nickel induced abnormal tail development of embryos. • NF stage 26–31 was the most sensitive window for embryos to nickel exposure. • Nickel affected the calcium-dependent myogenic gene expression in embryos. - Abstract: The developmental toxicity of nickel was examined in the embryos of Bombina orientalis, a common amphibian in Korea. Based on a standard frog embryo teratogenesis assay, the LC{sub 50} and EC{sub 50} for malformation of nickel after 168 h of treatment were 33.8 μM and 5.4 μM, respectively. At a lethal concentration (100 μM), nickel treatment decreased the space between gill filaments and caused epithelial swelling and abnormal fusion of gill filaments. These findings suggest that nickel affects the functional development of gills, leading to embryonic death. At sublethal concentrations (1–10 μM), nickel produced multiple embryonic abnormalities, including bent tail and tail dysplasia. At 10 μM, nickel significantly decreased tail length and tail muscle fiber density in tadpoles, indicating inhibition of myogenic differentiation. Before hatching, the pre-muscular response to muscular response stages (stages 26–31) were the most sensitive period to nickel with respect to tail muscle development. During these stages, MyoD mRNA was upregulated, whereas myogenic regulatory factor 4 mRNA was downregulated by 0.1 μM nickel. Calcium-dependent kinase activities in muscular response stage embryos were significantly decreased by nickel, whereas these activities were restored by exogenous calcium. In tadpoles, 10 μM nickel significantly decreased the expression of the myosin heavy chain and the 12/101 muscle marker protein in the tail. Expression was restored by exogenous calcium. Our results indicate that nickel affects muscle development by

Specific features of ontogeny of Iris orientalis Mill. introduced to the south-east Ukraine

Directory of Open Access Journals (Sweden)

Pavlova Marina Aleksandrovna

2015-12-01

Full Text Available The paper presents research findings on the ontogeny of Iris orientalis Mill. introduced to the Donetsk Botanical Garden. It was established, that in the course of four years, plantlets subsequently pass the following stages: germinating seedling, juvenile, immature, virginal and young generative stages, reaching mature generative stage in their fifth or sixth year. Typical features of a seedling: bond with a seed, significant structural changes in the course of the development―formation of one or two assimilative leaves, growth and branching of the main root. Juvenile age stage is indicated by formation of three-leaf fan and one or two additional roots, immature stage―by a complete leaf fan of five or seven leaves and by development of additional root system. Virginal stage is distinct due to the transition from monopodial growth to sympodial one with a primary bush formation. Generative stage is marked by biomorph formation, flowering and fruitage. Ontogeny of this species when it is cultivated is characterized by dynamic polyvariety, caused by heterogeneity of individual seedling growth rates. Based on these findings, a seed propagation of I. orientalis is suggested for obtaining a lot of high-grade planting material for landscaping in two or three years after sowing the seeds.

Entrapped by the uneven central and Middle Eastern terrains: Genetic status of populations of Hirudo orientalis (Annelida, Clitellata, Hirudinida) with a phylogenetic review of the genus Hirudo.

Science.gov (United States)

Darabi-Darestani, Kaveh; Sari, Alireza; Sarafrazi, Alimorad; Utevsky, Serge

2018-04-01

Phylogenetic relationships between species of the genus Hirudo plus genetic variation in the entire distribution range of Hirudo orientalis were investigated based on mitochondrial (COI and 12S rDNA) and nuclear (ITS1+5.8S+ITS2) genome regions. The sister relationship of Hirudo orientalis and H. medicinalis was revealed with a high posterior probability. A broad and patchy distribution with minor genetic differences was observed in populations of H. orientalis along the central and Middle Eastern parts of Asia. The known distribution range occurred in topographically heterogeneous landscapes around the Caspian Sea. The demographic analysis suggests the selection of the COI locus under unfavourable respiratory conditions, but population size expansion cannot be fully rejected. The genetic variation trend indicated northward dispersal. Higher haplotype diversity in the South Caspian region potentially suggests the area as a historical refugium for the species. The vast dispersal is assumed to occur after the Pleistocene glaciations via vertebrate hosts. Copyright © 2017 Elsevier Inc. All rights reserved.

Influence of geology and human activity on the genetic structure and demography of the Oriental fire-bellied toad (Bombina orientalis).

Science.gov (United States)

Fong, Jonathan J; Li, Pi-Peng; Yang, Bao-Tian; Zhou, Zheng-Yan; Leaché, Adam D; Min, Mi-Sook; Waldman, Bruce

2016-04-01

The Oriental fire-bellied toad (Bombina orientalis) is a commonly used study organism, but knowledge of its evolutionary history is incomplete. We analyze sequence data from four genetic markers (mtDNA genes encoding cytochrome c oxidase subunit I, cytochrome b, and 12S-16S rRNA; nuDNA gene encoding recombination activating gene 2) from 188 individuals across its range in Northeast Asia to elucidate phylogeographic patterns and to identify the historic events that shaped its evolutionary history. Although morphologically similar across its range, B. orientalis exhibits phylogeographic structure, which we infer was shaped by geologic, climatic, and anthropogenic events. Phylogenetic and divergence-dating analyses recover four genetically distinct groups of B. orientalis: Lineage 1-Shandong Province and Beijing (China); Lineage 2-Bukhan Mountain (Korea); Lineage 3-Russia, Northeast China, and northern South Korea; and Lineage 4-South Korea. Lineage 2 was previously unknown. Additionally, we discover an area of secondary contact on the Korean Peninsula, and infer a single dispersal event as the origin of the insular Jeju population. Skyline plots estimate different population histories for the four lineages: Lineages 1 and 2 experienced population decreases, Lineage 3 remained stable, while Lineage 4 experienced a sharp increase during the Holocene. The timing of the population expansion of Lineage 4 coincides with the advent of rice cultivation, which may have facilitated the increase in population size by providing additional breeding habitat. Copyright © 2016 Elsevier Inc. All rights reserved.

Caesium-137 soil-to-plant transfer for representative agricultural crops of monocotyledonous and dicotyledonous plants in post-Chernobyl steppe landscape

Science.gov (United States)

Paramonova, Tatiana; Komissarova, Olga; Turykin, Leonid; Kuzmenkova, Natalia; Belyaev, Vladimir

2016-04-01

The accident at the Chernobyl nuclear power plant in 1986 had a large-scale action on more than 2.3 million hectares agricultural lands in Russia. The area of radioactively contaminated chernozems of semi-arid steppe zone with initial levels of Cs-137 185-555 kBq/m2 in Tula region received the name "Plavsky radioactive hotspot". Nowadays, after the first half-life period of Cs-137 arable chernozems of the region are still polluted with 3-6-fold excess above the radioactive safety standard (126-228 kBq/m2). Therefore, qualitative and quantitative characteristics of Cs-137 soil-to-plant transfer are currently a central problem for land use on the territory. The purpose of the present study was revealing the biological features of Cs-137 root uptake from contaminated arable chernozems by different agricultural crops. The components of a grass mixture growing at the central part of Plavsky radioactive hotspot with typical dicotyledonous and monocotyledonous plants - galega (Galega orientalis, Fabaceae family) and bromegrass (Bromus inermis, Gramineae family) respectively - were selected for the investigation, that was conducted during the period of harvesting in 2015. An important point was that the other factors influenced on Cs-137 soil-to-plant transfer - the level of soil pollution, soil properties, climatic conditions, vegetative phase, etc. - were equal. So, biological features of Cs-137 root uptake could be estimated the most credible manner. As a whole, general discrimination of Cs-137 root uptake was clearly shown for both agricultural crops. Whereas Cs-137 activity in rhizosphere 30-cm layer of arable chernozem was 371±74 Bq/kg (140±32 kBq/m2), Cs-137 activities in plant biomass were one-two orders of magnitude less, and transfer factor (TF) values (the ratio of the Cs-137 activities in vegetation and in soil) not exceeded 0.11. At the same time bioavailability of Cs-137 for bromegrass was significantly higher than for galega: TFs in total biomass of the

Antioxidant and glucose metabolizing potential of edible insect, Brachytrupes orientalis via modulating Nrf2/AMPK/GLUT4 signaling pathway.

Science.gov (United States)

Dutta, Prachurjya; Dey, Tapan; Dihingia, Anjum; Manna, Prasenjit; Kalita, Jatin

2017-11-01

Brachytrupes orientalis (Gryllidae) is a common edible insect species eaten by the different tribes of North East India. This study investigated the potentiality of Brachytrupes orientalis extracts in different solvent hydro-alcoholic (AEBO), hexane (HEBO) and ethyl acetate (EEBO) on glucose utilization and cell viability in high glucose (HG) treated myotubes. It has been observed that AEBO supplementation significantly increased the glucose utilization against HG exposure; however, treatment HEBO and EEBO have no significant effect. AEBO also increased the intercellular glucose-6-phosphate level and the protein expression of both phospho-AMPK and GLUT4 in HG treated myotubes in a dose dependent manner. Furthermore, supplementation with AEBO decreased the intercellular ROS production, lipid peroxidation, and up-regulated the protein expression of Nrf2 and GST. Chromatography and Spectroscopic analyses of AEBO also suggest that Ursolic acid may be one of the bioactive principles with rich potassium, sodium, calcium and magnesium content. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Transplantation immunity in the American cockroach, Periplaneta americana: the rejection of integumentary grafts from Blatta orientalis.

Science.gov (United States)

Karp, R D; Meade, C C

1993-01-01

The results from several previous studies have indicated that the American cockroach is able to respond to integumentary xenografts, but doubt remained as to whether cockroaches could effectively discriminate between self and allogeneic differences. This was emphasized by the fact that while one study reported that Periplaneta americana responded to grafts donated by the closely related genus Blatta orientalis, the data reported elsewhere, using a different assay system, found no such reactivity. Since we have subsequently reported, using a direct histological assay, that Periplaneta can in fact recognize and destroy integumentary allografts, we initiated a study to hopefully sort out the enigma presented by previous data using Blatta as a transplant donor. Integument from Blatta orientalis was transplanted orthotopically onto Periplaneta americana, and at various time points post-transplant, scored histologically for the survival of the subcuticular epidermal layer. The results clearly demonstrated that Periplaneta reacted to the Blatta tissue, because approximately 82% of the grafts had the epidermal layer destroyed by day 7 posttransplant. The kinetics of the response to Blatta was more in line with our allograft data, which would be in agreement with other work indicating that the closer the donor and recipient are on the phylogenetic tree, the less intense the reactivity to the foreign transplant.

Biofilm formation of Francisella noatunensis subsp. orientalis

Science.gov (United States)

Soto, Esteban; Halliday-Wimmonds, Iona; Francis , Stewart; Kearney, Michael T.; Hansen, John D.

2015-01-01

Francisella noatunensis subsp. orientalis (Fno) is an emergent fish pathogen in both marine and fresh water environments. The bacterium is suspected to persist in the environment even without the presence of a suitable fish host. In the present study, the influence of different abiotic factors such as salinity and temperature were used to study the biofilm formation of different isolates of Fno including intracellular growth loci C (iglC)and pathogenicity determinant protein A (pdpA) knockout strains. Finally, we compared the susceptibility of planktonic and biofilm to three disinfectants used in the aquaculture and ornamental fish industry, namely Virkon®, bleach and hydrogen peroxide. The data indicates that Fno is capable of producing biofilms within 24 h where both salinity as well as temperature plays a role in the growth and biofilm formation of Fno. Mutations in theiglC or pdpA, both known virulence factors, do not appear to affect the capacity of Fno to produce biofilms, and the minimum inhibitory concentration, and minimum biocidal concentration for the three disinfectants were lower than the minimum biofilm eradication concentration values. This information needs to be taken into account if trying to eradicate the pathogen from aquaculture facilities or aquariums.

Efficiency of biodegradable EDDS, NTA and APAM on enhancing the phytoextraction of cadmium by Siegesbeckia orientalis L. grown in Cd-contaminated soils.

Science.gov (United States)

Lan, Jichuan; Zhang, Shirong; Lin, Haichuan; Li, Ting; Xu, Xiaoxun; Li, Yun; Jia, Yongxia; Gong, Guoshu

2013-05-01

Chelant assisted phytoextraction has been proposed to enhance the efficiency of remediation. This study evaluated the effects of biodegradable ethylene diamine tetraacetate (EDDS), nitrilotriacetic (NTA) and anionic polyacrylamide (APAM) on the tolerance and uptake of Siegesbeckia orientalis L. at 10 and 100 mg kg(-1) Cd-contaminated soils. On the 80th and 90th days of transplanting, pots were treated with EDDS and NTA at 0 (control), 1 and 2 mmol kg(-1) soils, and APAM at 0 (control), 0.07 and 0.14 g kg(-1). Generally, the root and shoot biomass of S. orientalis in all treatments reduced not significantly compared with the control, and the activities of peroxidase and catalase in leaves generally increased by the application of chelants (P<0.05). The concentrations of Cd in the shoots were increased significantly by addition of all chelants. As a result, the Cd accumulation of S. orientalis under treatments with higher dosages of the three chelants on the 80th day were 1.40-2.10-fold and 1.12-1.25-fold compared to control at 10 and 100 mg kg(-1) Cd, respectively. Under the addition of 2 mmol kg(-1) NTA on the 80th day, the highest metal extraction ratio reached 1.2% and 0.4% at 10 and 100 mg kg(-1) Cd soils, respectively. Therefore, the applications of EDDS, NTA and APAM may provide more efficient choices in chemical-enhanced phytoextraction. Copyright © 2013 Elsevier Ltd. All rights reserved.

Influence of Environmental Pollution on Leaf Properties of Urban Plane Trees, Platanus orientalis L.

Science.gov (United States)

Pourkhabbaz, Alireza; Rastin, Nayerah; Olbrich, Andrea; Langenfeld-Heyser, Rosemarie

2010-01-01

To investigate whether leaves of plane trees (Platanus orientalis) are damaged by traffic pollution, trees from a megacity (Mashhad, Iran) and a rural area were investigated. Soil and air from the urban centre showed enrichment of several toxic elements, but only lead was enriched in leaves. Leaf size and stomata density were lower at the urban site. At the urban site leaf surfaces were heavily loaded by dust particles but the stomata were not occluded; the cuticle was thinner; other anatomical properties were unaffected suggesting that plane trees can cope with traffic exhaust in megacities. PMID:20577871

Population structure and reproductive biology of Mesopodopsis orientalis (Crustacea: Mysida) in a tropical mangrove ecosystem in India

Digital Repository Service at National Institute of Oceanography (India)

Biju, A.; Panampunnayil, S.U.

to prevent excessive changes in their internal environment by maintain their blood hyper/ hypo-osmotic to the medium. As in many other mysid species, M. orientalis presented considerable fluctuation in its abundance. Principle factor of seasonal abundance... in the Malaysian sandy beach. These observations suggest that the intensity of breeding varies within different population of the same species. The water temperature significantly affects the periodicity and reproductive biology of mysids (Mauchline, 1980...

Isolation and bioactivities of the flavonoids morin and morin-3-O-β-D-glucopyranoside from Acridocarpus orientalis-A wild Arabian medicinal plant.

Science.gov (United States)

Hussain, Javid; Ali, Liaqat; Khan, Abdul Latif; Rehman, Najeeb Ur; Jabeen, Farah; Kim, Jong-Sang; Al-Harrasi, Ahmed

2014-10-31

Acridocarpus orientalis is an important medicinal plant for some of the locals of Arabian region. Very little is known about its phytochemical constituents. In the present study, we aimed to isolate bioactive chemicals from the crude methanolic extract of the aerial parts of A. orientalis. The extraction and isolation resulted in the purification of two flavonoids: morin (1) and morin-3-O-β-D-glucopyranoside (2). The structure elucidation was carried out by extensive analysis of spectroscopic data and comparison with the reported data for the known constituents. The pure isolates were subjected to various biological assays for their bioactivities. The compounds 1 and 2 were significantly active against the growth of various pathogenic fungi and phytotoxic against lettuce seed at higher concentrations. Furthermore, the free radical scavenging activities, anti-lipid peroxidation, and cytotoxic effects against HepG2, HT29, and HCT116 cancer cell lines were also assayed and the results are presented in this paper.

COMPARISON OF CHITIN STRUCTURES DERIVED FROM THREE COMMON WASP SPECIES (Vespa crabro LINNAEUS, 1758, Vespa orientalis LINNAEUS, 1771 and Vespula germanica (FABRICIUS, 1793)).

Science.gov (United States)

Kaya, Murat; Bağrıaçık, Nil; Seyyar, Osman; Baran, Talat

2015-08-01

There has been no study on the chitin structure of wasp species. Here, we selected the three most common wasp species belonging to the family Vespidae for chitin extraction and characterization. Chitin was isolated from each wasp species and characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), elemental analysis (EA), and scanning electron microscopy (SEM). The chitin contents of Vespa crabro, Vespa orientalis, and Vespula germanica were 8.3, 6.4, and 11.9%, respectively. The crystalline index (CrI) values for the chitin extracted from each species were 69.88, 53.92, and 50%, respectively. The most important finding of the study is that although the same method was used to extract chitin from each of the three wasp species, the degree of acetylation was different: for V. crabro and V. orientalis it was 96.85 and 99.82% (the chitin was extremely pure), respectively, whereas that for V. germanica the chitin was 79.83%. © 2015 Wiley Periodicals, Inc.

Crescimento de Siegesbeckia orientalis sob diferentes condições de luminosidade Growth of Siegesbeckia orientalis under different light conditions

Directory of Open Access Journals (Sweden)

D.B. Aguilera

2004-03-01

Full Text Available Neste estudo, objetivou-se contrastar os efeitos de sombreamento sobre o crescimento de S. orientalis, utilizando a análise de crescimento. Os experimentos foram conduzidos em vasos, a pleno sol (A e sob sombrite 50% (B. As plantas tiveram seus índices de crescimento determinados aos 14, 28, 42, 56, 80, 94 e 108 dias após o transplante (DAT, para A; e aos 14, 28, 42, 56, 70, 84, 108, 122 e 136 DAT, para B. O delineamento experimental foi o inteiramente casualizado, com quatro repetições. Os dados foram analisados por meio de análise de regressão. Os modelos foram escolhidos com base na significância dos coeficientes de regressão, utilizando-se o teste t até 10%, no coeficiente de determinação e no fenômeno em estudo. As plantas apresentaram comportamento semelhante em A e B para a maioria das variáveis analisadas, embora as plantas sombreadas (radiação média de 218 µmol m-² s-¹ tivessem maior duração do ciclo cultural, cerca de 140 DAT, retardando os valores máximos e/ou mínimos, em relação às plantas a luz plena (média de 658 µmol m-² s-¹, com aproximadamente 110 DAT. Em B, foram obtidas também as maiores médias para a maioria dos índices avaliados - área foliar, altura, números de folhas e capítulos florais, biomassa seca total, taxa de crescimento absoluto, taxa de crescimento relativo, razão de peso foliar, razão de área foliar e área foliar específica -, sugerindo que a espécie é favorecida pelo sombreamento.This study aimed to contrast the effects of shading on the growth of S. orientalis by applying growth analysis. The experiments were conducted in pots under full sunlight (A and 50% shading (B. Plant growth indices were determined at 14, 28, 42, 56, 80, 94 and 108 days after transplant (DAT for A and at 14, 28, 42, 56, 70, 84, 108, 122, 136 DAT for B. The experimental design was completely randomized, with four repetitions. Data were analyzed by means of regression analysis. The models were

GENERAL ASSESMENT OF SEED STANDS OF ORIENTAL SPRUCE (Picea orientalis L. Link.

Directory of Open Access Journals (Sweden)

İbrahim Turna

2001-04-01

Full Text Available The seeds for afforestation studies with oriental spruce (Picea orientalis L.Link. populations are usually gathered from already established seed stands. This study showed that most of the seed stands were not selected appropriately and some of them were not properly protected and maintained when evaluated according to the “criteria for selection and management of seed stands”. The average slope of seed stands was as high as 43% and the average size varied from 33.5 ha to 147.5 ha Since the stands were open to social disturbances and wind effects, the number of trees per ha decreased 51% and the number of seed trees dropped to a level of 56%. In conclusion, seeds collected from poorly established seed stands will likely jeopardize the success in reforestation studies in the future.

Genome sequence of Ensifer arboris strain LMG 14919T; a microsymbiont of the legume Prosopis chilensis growing in Kosti, Sudan

Science.gov (United States)

Reeve, Wayne; Tian, Rui; Bräu, Lambert; Goodwin, Lynne; Munk, Christine; Detter, Chris; Tapia, Roxanne; Han, Cliff; Liolios, Konstantinos; Huntemann, Marcel; Pati, Amrita; Woyke, Tanja; Mavrommatis, Konstantinos; Markowitz, Victor; Ivanova, Natalia; Kyrpides, Nikos; Willems, Anne

2013-01-01

Ensifer arboris LMG 14919T is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as a legume microsymbiont of several species of legume trees. LMG 14919T was isolated in 1987 from a nodule recovered from the roots of the tree Prosopis chilensis growing in Kosti, Sudan. LMG 14919T is highly effective at fixing nitrogen with P. chilensis (Chilean mesquite) and Acacia senegal (gum Arabic tree or gum acacia). LMG 14919T does not nodulate the tree Leucena leucocephala, nor the herbaceous species Macroptilium atropurpureum, Trifolium pratense, Medicago sativa, Lotus corniculatus and Galega orientalis. Here we describe the features of E. arboris LMG 14919T, together with genome sequence information and its annotation. The 6,850,303 bp high-quality-draft genome is arranged into 7 scaffolds of 12 contigs containing 6,461 protein-coding genes and 84 RNA-only encoding genes, and is one of 100 rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project. PMID:25197433

Genome sequence of Ensifer arboris strain LMG 14919(T); a microsymbiont of the legume Prosopis chilensis growing in Kosti, Sudan.

Science.gov (United States)

Reeve, Wayne; Tian, Rui; Bräu, Lambert; Goodwin, Lynne; Munk, Christine; Detter, Chris; Tapia, Roxanne; Han, Cliff; Liolios, Konstantinos; Huntemann, Marcel; Pati, Amrita; Woyke, Tanja; Mavrommatis, Konstantinos; Markowitz, Victor; Ivanova, Natalia; Kyrpides, Nikos; Willems, Anne

2014-06-15

Ensifer arboris LMG 14919(T) is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as a legume microsymbiont of several species of legume trees. LMG 14919(T) was isolated in 1987 from a nodule recovered from the roots of the tree Prosopis chilensis growing in Kosti, Sudan. LMG 14919(T) is highly effective at fixing nitrogen with P. chilensis (Chilean mesquite) and Acacia senegal (gum Arabic tree or gum acacia). LMG 14919(T) does not nodulate the tree Leucena leucocephala, nor the herbaceous species Macroptilium atropurpureum, Trifolium pratense, Medicago sativa, Lotus corniculatus and Galega orientalis. Here we describe the features of E. arboris LMG 14919(T), together with genome sequence information and its annotation. The 6,850,303 bp high-quality-draft genome is arranged into 7 scaffolds of 12 contigs containing 6,461 protein-coding genes and 84 RNA-only encoding genes, and is one of 100 rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

[Foliar water use efficiency of Platycladus orientalis sapling under different soil water contents].

Science.gov (United States)

Zhang, Yong E; Yu, Xin Xiao; Chen, Li Hua; Jia, Guo Dong; Zhao, Na; Li, Han Zhi; Chang, Xiao Min

2017-07-18

The determination of plant foliar water use efficiency will be of great value to improve our understanding about mechanism of plant water consumption and provide important basis of regional forest ecosystem management and maintenance, thus, laboratory controlled experiments were carried out to obtain Platycladus orientalis sapling foliar water use efficiency under five different soil water contents, including instantaneous water use efficiency (WUE gs ) derived from gas exchange and short-term water use efficiency (WUE cp ) caculated using carbon isotope model. The results showed that, controlled by stomatal conductance (g s ), foliar net photosynthesis rate (P n ) and transpiration rate (T r ) increased as soil water content increased, which both reached maximum va-lues at soil water content of 70%-80% field capacity (FC), while WUE gs reached a maximum of 7.26 mmol·m -2 ·s -1 at the lowest soil water content (35%-45% FC). Both δ 13 C of water-soluble leaf and twig phloem material achieved maximum values at the lowest soil water content (35%-45% FC). Besides, δ 13 C values of leaf water-soluble compounds were significantly greater than that of phloem exudates, indicating that there was depletion in 13 C in twig phloem compared with leaf water-soluble compounds and no obvious fractionation in the process of water-soluble material transportation from leaf to twig. Foliar WUE cp also reached a maximum of 7.26 mmol·m -2 ·s -1 at the lowest soil water content (35%-45% FC). There was some difference between foliar WUE gs and WUE cp under the same condition, and the average difference was 0.52 mmol·m -2 ·s -1 . The WUE gs had great space-time variability, by contrast, WUE cp was more representative. It was concluded that P. orientalis sapling adapted to drought condition by increasing water use efficiency and decreasing physiological activity.

KERAGAMAN PERTUMBUHAN BIBIT GEMPOL(Nauclea orientalis L. DARI BEBERAPA POHON INDUK

Directory of Open Access Journals (Sweden)

Kurniawati Purwaka Putri

2017-02-01

Full Text Available Gempol (Nauclea orientalis L. is one of the fast growing species that potential to be developed in agroforestry system. These species used as wood production and also Jabon, which is the alternative for sengon wood. Gempol adapted growth at wet and drylands such as at riverbanks, rice fields and yards. The constrained of the development of community forests of gempol for high productivity is the availability of good quality seed sources. Seeds and seedlings are largely determined by the quality of the parent tree, hence the diversity of the mother plant will affect the seeds it produces. The purpose of this study was to determine the diversity of the growth of seedlings in the nursery gempol of 64 parent trees from Majalengka and Banten. The study design used was completely randomized design consisting of 64 trees parent gempol, with three replications and each replication consisted of six seedlings. The variables measured were the diameter and height of seedlings. The results showed that significantly affected the parent tree diameter and height of seedlings gempol. Growth in diameter is the best demonstrated by the parent tree 16 at 5.4 cm. The high growth (32.88 cm produced by seeds from the parent tree 10. Gempol (Nauclea orientalis L. merupakan salah satu tanaman cepat tumbuh yang potensial untuk dikembangkan dengan pola agroforestry.. Jenis tanaman ini dimanfaatkan khususnya masyarakat Jawa Barat sebagai pohon penghasil kayu pertukangan selain sengon dan jabon.Gempol mampu beradaptasi pada lahan basah maupun kering seperti di bantaran sungai, pematang sawah, tegalan dan pekarangan.  Pengembangan hutan rakyat gempol yang produktifitas tinggi terkendala ketersediaan sumber benih yang berkualitas. Benih dan bibit yang berkualitas sangat ditentukan oleh pohon induknya, oleh karena itu keragaman pada pohon induk akan berpengaruh terhadap bibit yang dihasilkannya. Tujuan penelitian ini adalah mengetahui keragaman pertumbuhan bibit gempol di

Reproductive biology and seasonality of the Indo-Australasian mysid Mesopodopsis orientalis (Crustacea: Mysida) in a tropical mangrove estuary, Malaysia

Science.gov (United States)

Hanamura, Yukio; Siow, Ryon; Chee, Phaik-Ean

2008-04-01

A year-round survey of the tropical shallow-water mysid Mesopodopsis orientalis (Tattersall, 1908) (Crustacea, Mysidacea) was conducted in the Merbok mangrove estuary, northwestern Peninsular Malaysia. The mysid formed dense aggregations at the river's edge close to the mangrove forest during the daytime, but very few were captured elsewhere in the estuary system. The sampled population was found in a wide range of salinities from 16 to 32, demonstrating broad euryhalinity, and the number of the catch at the littoral zone ranged from 11.8 to 2273 ind m -2. The overall annual mean was 709.2 ind m -2. Females predominated over males in the entire population, and brooding females were present at every monthly sample, indicating that reproduction is continuous year round. The clutch size positively correlated with female body length. The diameter of eggs (Stage I embryos) was unaffected by the seasonality and independent of the maternal size within an observed size range. The life history pattern of the estuarine population of M. orientalis showed close similarity to that of the coastal counterpart. However, the former was found to produce fewer but larger eggs, and the specimens in this population were larger than those in the coastal population at the embryo, juvenile, and adult stages. This evidence indicates that the life history features of the estuarine population would differ to some degree from those of the coastal counterpart.

Wind energy harvesting with a piezoelectric harvester

International Nuclear Information System (INIS)

Wu, Nan; Wang, Quan; Xie, Xiangdong

2013-01-01

An energy harvester comprising a cantilever attached to piezoelectric patches and a proof mass is developed for wind energy harvesting, from a cross wind-induced vibration of the cantilever, by the electromechanical coupling effect of piezoelectric materials. The vibration of the cantilever under the cross wind is induced by the air pressure owing to a vortex shedding phenomenon that occurs on the leeward side of the cantilever. To describe the energy harvesting process, a theoretical model considering the cross wind-induced vibration on the piezoelectric coupled cantilever energy harvester is developed, to calculate the charge and the voltage from the harvester. The influences of the length and location of the piezoelectric patches as well as the proof mass on the generated electric power are investigated. Results show that the total generated electric power can be as high as 2 W when the resonant frequency of the cantilever harvester is close to the vortex shedding frequency. Moreover, a value of total generated electric power up to 1.02 W can be practically realized for a cross wind with a variable wind velocity of 9–10 m s −1 by a harvester with a length of 1.2 m. This research facilitates an effective and compact wind energy harvesting device. (paper)

Chemical Constituents and Toxicity of Essential Oils of Oriental Arborvitae, Platycladus orientalis (L. Franco, against Three Stored-Product Beetles Componentes Químicos y Toxicidad de Aceites Esenciales de Tuya Oriental, Platycladus orientalis (L. Franco, contra Tres Escarabajos de Productos Almacenados

Directory of Open Access Journals (Sweden)

Seyed Mehdi Hashemi

2012-06-01

Full Text Available Plant secondary metabolites play an important role in plant-insect interactions and therefore such compounds may have insecticidal or biological activity against insects. Fumigant toxicity of essential oils of leaves and fruits from oriental arborvitae (Platycladus orientalis (L. Franco (Cupressaceae was investigated against adults of cowpea weevil (Callosobruchus maculatus Fab., rice weevil (Sitophilus oryzae L., and red flour beetle (Tribolium castaneum Herbst. Fresh leaves and fruits were subjected to hydrodistillation using a Clevenger-type apparatus and the chemical composition of the volatile oils was studied by gas chromatography-mass spectrometry (GC-MS. Twenty-six compounds (92.9% and 23 constituents (97.8% were identified in the leaf and the fruit oils, respectively. The major components of both leaves and fruits oils were α-pinene (35.2%, 50.7%, α-cedrol (14.6%, 6.9% and Δ-3-carene (6.3%, 13.8%, respectively. Both oils in the same concentration were tested for their fumigant toxicity on each species. Results showed that leaf oils were more toxic than fruit oils against three species of insects. Callosobruchus maculatus was more susceptible than S. oryzae and T. castaneum. LC510 values of the leaf and the fruit oils at 24 h were estimated 6.06 and 9.24 μL L¹ air for C. maculatus, 18.22 and 21.56 μL L-1 air for S. oryzae, and 32.07 and 36.58 μL L4 air for T. castaneum, respectively. These results suggested that P. orientalis oils may have potential as a control agent against C. maculatus, S. oryzae, and T. castaneum.Los metabolitos secundarios de las plantas juegan un papel importante en las interacciones planta-insecto, y por lo tanto pueden tener actividad insecticida o biológica en los insectos. La toxicidad fumigante de los aceites esenciales de hojas y frutos del árbol oriental de la vida (Platycladus orientalis (L. Franco (Cupressaceae fue investigada contra adultos de gorgojo del guisante (Callosobruchus maculatus Fab

Floral nectar production and carbohydrate composition and the structure of receptacular nectaries in the invasive plant Bunias orientalis L. (Brassicaceae).

Science.gov (United States)

Denisow, Bożena; Masierowska, Marzena; Antoń, Sebastian

2016-11-01

The data relating to the nectaries and nectar secretion in invasive Brassicacean taxa are scarce. In the present paper, the nectar production and nectar carbohydrate composition as well as the morphology, anatomy and ultrastructure of the floral nectaries in Bunias orientalis were investigated. Nectary glands were examined using light, fluorescence, scanning electron and transmission electron microscopy. The quantities of nectar produced by flowers and total sugar mass in nectar were relatively low. Total nectar carbohydrate production per 10 flowers averaged 0.3 mg. Nectar contained exclusively glucose (G) and fructose (F) with overall G/F ratio greater than 1. The flowers of B. orientalis have four nectaries placed at the base of the ovary. The nectarium is intermediate between two nectary types: the lateral and median nectary type (lateral and median glands stay separated) and the annular nectary type (both nectaries are united into one). Both pairs of glands represent photosynthetic type and consist of epidermis and glandular tissue. However, they differ in their shape, size, secretory activity, dimensions of epidermal and parenchyma cells, thickness of secretory parenchyma, phloem supply, presence of modified stomata and cuticle ornamentation. The cells of nectaries contain dense cytoplasm, plastids with starch grains and numerous mitochondria. Companion cells of phloem lack cell wall ingrowths. The ultrastructure of secretory cells indicates an eccrine mechanism of secretion. Nectar is exuded throughout modified stomata.

Nutrient supply to reed canary grass as a bioenergy crop. Intercropping and fertilization with ash or sewage sludge

Energy Technology Data Exchange (ETDEWEB)

Lindvall, Eva

2012-07-01

Production of renewable energy from herbaceous crops on agricultural land is of great interest since fossil fuels need to be replaced with sustainable energy sources. Reed canary grass (RCG), Phalaris arundinacea L. is an interesting species for this purpose. The aim of this thesis was to study different approaches to reduce the requirement of mineral fertilizers in RCG production for bioenergy purposes. Paper I describes a study where fertilization effects and risk of heavy metal enrichment were studied, using annual applications of ash for seven years. Ash from co-combustion of RCG and municipal wastes (mixed ash), pure RCG ash and commercial fertilizers were compared. The experiment was harvested each spring. Paper II describes an ongoing study in which the effects of intercropping RCG in mixture with nitrogen-fixing perennial legumes are examined in two experiments, in combination with various fertilization treatments. Three fertilization treatments were applied: high N, low N (half of the high N) and low N + RCG ash/sewage sludge. A delayed harvest method was used; cutting the biomass in late autumn and harvesting in spring. Besides dry matter yield, the N-fixation rate was estimated. The results from paper I showed no differences between treatments in the dry matter yields or in the heavy metal concentrations in the biomass. Soil samples, taken when the experiment was finished, showed differences between treatments for Cd, Pb and Zn only in the uppermost soil level, highest levels for the mixed ash treatment. The results in paper II showed that at one site the legume proportion in the mixtures was low and did not affect RCG growth negatively. The high N treatment gave a higher spring yield than the low N treatments. Mean rates of N2-fixation in the first production year were 12-28, 33-40 and 55 kg N ha-1 kg for goat's rue (Galega orientalis Lam.), red clover (Trifolium pratense L.), and alsike clover (Trifolium hybridum L.), plots, respectively. At the

CITOGENETICS EFFECTS INDUCED BY THE ADMINISTRATION OF SUBSTANCES WITH REDUCTION POTENTIAL AT LARIX DECIDUA MILL. SSP. CARPATICA, PICEA ABIES (L. KARST. AND THUJA ORIENTALIS L

Directory of Open Access Journals (Sweden)

Ioana Anca Ieremia

2007-08-01

Full Text Available The paper present the influence of ascorbic acid, riboflavin, citric acid and sodium bisulphit upon the mitotic division of Larix decidua Mill ssp. carpatica, Picea abies (L. Karst and Thuja orientalis L. The treatment was applied in one variant, germinated seeds in ascorbic acid, riboflavin, citric acid and sodium bisulphit in 3 concentrations.

Harvest Regulations and Implementation Uncertainty in Small Game Harvest Management

Directory of Open Access Journals (Sweden)

Pål F. Moa

2017-09-01

Full Text Available A main challenge in harvest management is to set policies that maximize the probability that management goals are met. While the management cycle includes multiple sources of uncertainty, only some of these has received considerable attention. Currently, there is a large gap in our knowledge about implemention of harvest regulations, and to which extent indirect control methods such as harvest regulations are actually able to regulate harvest in accordance with intended management objectives. In this perspective article, we first summarize and discuss hunting regulations currently used in management of grouse species (Tetraonidae in Europe and North America. Management models suggested for grouse are most often based on proportional harvest or threshold harvest principles. These models are all built on theoretical principles for sustainable harvesting, and provide in the end an estimate on a total allowable catch. However, implementation uncertainty is rarely examined in empirical or theoretical harvest studies, and few general findings have been reported. Nevertheless, circumstantial evidence suggest that many of the most popular regulations are acting depensatory so that harvest bag sizes is more limited in years (or areas where game density is high, contrary to general recommendations. A better understanding of the implementation uncertainty related to harvest regulations is crucial in order to establish sustainable management systems. We suggest that scenario tools like Management System Evaluation (MSE should be more frequently used to examine robustness of currently applied harvest regulations to such implementation uncertainty until more empirical evidence is available.

Assessing the performance of multiplexed tandem PCR for the diagnosis of pathogenic genotypes of Theileria orientalis using pooled blood samples from cattle.

Science.gov (United States)

Gebrekidan, Hagos; Gasser, Robin B; Stevenson, Mark A; McGrath, Sean; Jabbar, Abdul

2017-02-01

Oriental theileriosis caused by multiple genotypes of Theileria orientalis is an important tick-borne disease of bovines. Here, we assessed the performance of an established multiplexed tandem PCR (MT-PCR) for the diagnosis of the two recognized, pathogenic genotypes (chitose and ikeda) of T. orientalis in cattle using pooled blood samples. We used a total of 265 cattle blood samples, which were divided into two groups according to previous MT-PCR results for individual samples. Samples in group 1 (n = 155) were from a herd with a relatively high prevalence of T. orientalis infection; and those in group 2 (n = 110) were from four herds with a low prevalence. For group 1, 31 and 15 batches of five- and ten-pooled samples (selected at random), respectively, were formed. For group 2, 22 and 11 batches of five- and ten-pooled samples (selected at random), respectively, were formed. DNAs from individual pooled samples in each batch and group were then tested by MT-PCR. For group 1, the apparent prevalences estimated using the 31 batches of five-pooled samples (97%) and 15 batches of ten-pooled samples (100%) were significantly higher compared with individual samples (75%). For group 2, higher apparent prevalences (9% and 36%) were also recorded for the 22 and 11 batches of pooled samples, respectively, compared with individual samples (7%). Overall, the average infection intensity recorded for the genotypes of chitose and ikeda were considerably lower in pooled compared with individual samples. The diagnostic specificities of MT-PCR were estimated at 95% and 94%, respectively, when batches of five- and ten-pooled samples were tested, and 94% for individual samples. The diagnostic sensitivity of this assay was estimated at 98% same for all individual, five- and ten-pooled samples. This study shows that screening batches of five- and ten-pooled blood samples from cattle herds are similar to those obtained for individual samples, and, importantly, that the reduced cost

Sustainability of Mangrove Harvesting: How do Harvesters' Perceptions Differ from Ecological Analysis?

Directory of Open Access Journals (Sweden)

Laura López-Hoffman

2006-12-01

Full Text Available To harvest biological resources sustainably, it is first necessary to understand what "sustainability" means in an ecological context, and what it means to the people who use the resources. As a case study, we examined the extractive logging of the mangrove Rhizophora mangle in the Río Limón area of Lake Maracaibo, in western Venezuela. The ecological definition of sustainable harvesting is harvesting that allows population numbers to be maintained or to increase over time. In interviews, the harvesters defined sustainable harvesting as levels permitting the maintenance of the mangrove population over two human generations, about 50 yr. In Río Limón, harvesters extract a combination of small adult and juvenile trees. Harvesting rates ranged from 7-35% of small adult trees. These harvesting levels would be sustainable according to the harvester's definition as long as juvenile harvesting was less than 40%. However, some harvesting levels that would be sustainable according to the harvesters were ecologically unsustainable, i.e., eventually causing declines in mangrove population numbers. It was also determined that the structure of mangrove forests was significantly affected by harvesting; even areas harvested at low, ecologically sustainable intensities had significantly fewer adult trees than undisturbed sites. Western Venezuela has no organized timber industry, so mangrove logs are used in many types of construction. A lagging economy and a lack of alternative construction materials make mangrove harvesting inevitable, and for local people, an economic necessity. This creates a trade-off between preserving the ecological characteristics of the mangrove population and responding to human needs. In order to resolve this situation, we recommended a limited and adaptive mangrove harvesting regime. We also suggest that harvesters could participate in community-based management programs as harvesting monitors.

Cytokinin-producing, plant growth-promoting rhizobacteria that confer resistance to drought stress in Platycladus orientalis container seedlings.

Science.gov (United States)

Liu, Fangchun; Xing, Shangjun; Ma, Hailin; Du, Zhenyu; Ma, Bingyao

2013-10-01

One of the proposed mechanisms through which plant growth-promoting rhizobacteria (PGPR) enhance plant growth is the production of plant growth regulators, especially cytokinin. However, little information is available regarding cytokinin-producing PGPR inoculation on growth and water stress consistence of forest container seedlings under drought condition. This study determined the effects of Bacillus subtilis on hormone concentration, drought resistance, and plant growth under water-stressed conditions. Although no significant difference was observed under well-watered conditions, leaves of inoculated Platycladus orientalis (oriental thuja) seedlings under drought stress had higher relative water content and leaf water potential compared with those of noninoculated ones. Regardless of water supply levels, the root exudates, namely sugars, amino acids and organic acids, significantly increased because of B. subtilis inoculation. Water stress reduced shoot cytokinins by 39.14 %. However, inoculation decreased this deficit to only 10.22 %. The elevated levels of cytokinins in P. orientalis shoot were associated with higher concentration of abscisic acid (ABA). Stomatal conductance was significantly increased by B. subtilis inoculation in well-watered seedlings. However, the promoting effect of cytokinins on stomatal conductance was hampered, possibly by the combined action of elevated cytokinins and ABA. B. subtilis inoculation increased the shoot dry weight of well-watered and drought seedlings by 34.85 and 19.23 %, as well as the root by 15.445 and 13.99 %, respectively. Consequently, the root/shoot ratio significantly decreased, indicative of the greater benefits of PGPR on shoot growth than root. Thus, inoculation of cytokinin-producing PGPR in container seedlings can alleviate the drought stress and interfere with the suppression of shoot growth, showing a real potential to perform as a drought stress inhibitor in arid environments.

Designing A General Deep Web Harvester by Harvestability Factor

NARCIS (Netherlands)

Khelghati, Mohammadreza; van Keulen, Maurice; Hiemstra, Djoerd

2014-01-01

To make deep web data accessible, harvesters have a crucial role. Targeting different domains and websites enhances the need of a general-purpose harvester which can be applied to different settings and situations. To develop such a harvester, a large number of issues should be addressed. To have

Energy harvesting from high-rise buildings by a piezoelectric harvester device

International Nuclear Information System (INIS)

Xie, X.D.; Wang, Q.; Wang, S.J.

2015-01-01

A novel piezoelectric technology of harvesting energy from high-rise buildings is developed. While being used to harness vibration energy of a building, the technology is also helpful to dissipate vibration of the building by the designed piezoelectric harvester as a tuned mass damper. The piezoelectric harvester device is made of two groups of series piezoelectric generators connected by a shared shaft. The shaft is driven by a linking rod hinged on a proof mass on the tip of a cantilever fixed on the roof of the building. The influences of some practical considerations, such as the mass ratio of the proof mass to the main structure, the ratios of the length and flexural rigidity of the cantilever to those of the main structure, on the root mean square (RMS) of the generated electric power and the energy harvesting efficiency of the piezoelectric harvester device are discussed. The research provides a new method for an efficient and practical energy harvesting from high-rise buildings by piezoelectric harvesters. - Highlights: • A new piezoelectric technology in energy harvesting from high-rise buildings is introduced. • A new mathematics model to calculate the energy harvested by the piezoelectric device is developed. • A novel efficient design of the piezoelectric harvester device in provided. • An electric power up to 432 MW under a seismic excitation at a frequency of 30 rad/s is achieved.

Are eavesdroppers multimodal? Sensory exploitation of flo-ral signals by a non-native cockroach Blatta orientalis

Directory of Open Access Journals (Sweden)

Rodrigo C. VERGARA, Alejandra TORRES-ARANEDA, Diego A. VILLAGRA, Robert A. RAGUSO, Mary T. K. ARROYO, Cristian A. VILLAGRA

2011-04-01

Full Text Available The study of multi-modal communication has only recently been extended to innate and learned interactions between flowers and their animal visitors, and usually only to pollinators. Here we studied the relevance of floral scent and visual display of a night blooming, putatively hawkmoth-pollinated plant Oenothera acaulis (Onagraceae in the attraction of non-native cockroaches Blatta orientalis (Blattodea: Blattidae, which function as facultative floral larcenists in coastal habitats of central Chile. We experimentally decoupled visual (corolla and olfactory (fragrance stimuli by presenting paper corollas and green mesh bags, with or without a freshly-picked natural flower inside. We then contrasted the behavioral responses of roaches in these treatments with those to the natural combination of traits in actual flowers and their respective control treatments, measuring the roaches’ frequency of first visits, mean and total residence time spent in each treatment. The roaches primarily used olfactory cues when approaching O. acaulis flowers at two biologically relevant spatial scales. In addition, the presence of conspecific roaches had a strong influence on recruitment to the experimental arena, increasing the statistical differences among treatments. Our results suggest a primacy of floral fragrance over visual stimuli in the foraging responses of B. orientalis. Olfactory cues were necessary and sufficient to attract the roaches, and the visual cues presented in our manipulations only marginally increased their attraction within a 20 cm diameter of the stimulus. The full spectrum of floral visitation behavior was not elicited by the artificial flowers, suggesting the need for additional tactile or contact chemosensory stimuli not provided by paper. Although the nitrogenous scent compounds that we found in O. acaulis flowers are almost exclusively found in hawkmoth-pollinated flowers, the attractiveness of these compounds to a non

CANINE DISTEMPER VIRUS IN A WILD FAR EASTERN LEOPARD ( PANTHERA PARDUS ORIENTALIS).

Science.gov (United States)

Sulikhan, Nadezhda S; Gilbert, Martin; Blidchenko, Ekaterina Yu; Naidenko, Sergei V; Ivanchuk, Galina V; Gorpenchenko, Tatiana Yu; Alshinetskiy, Mikhail V; Shevtsova, Elena I; Goodrich, John M; Lewis, John C M; Goncharuk, Mikhail S; Uphyrkina, Olga V; Rozhnov, Vyatcheslav V; Shedko, Sergey V; McAloose, Denise; Miquelle, Dale G

2018-01-01

The critically endangered population of Far Eastern leopards ( Panthera pardus orientalis) may number as few as 60 individuals and is at risk from stochastic processes such as infectious disease. During May 2015, a case of canine distemper virus (CDV) was diagnosed in a wild leopard exhibiting severe neurologic disease in the Russian territory of Primorskii Krai. Amplified sequences of the CDV hemagglutinin gene and phosphoprotein gene aligned within the Arctic-like clade of CDV, which includes viruses from elsewhere in Russia, China, Europe, and North America. Histologic examination of cerebral tissue revealed perivascular lymphoid cuffing and demyelination of the white matter consistent with CDV infection. Neutralizing antibodies against CDV were detected in archived serum from two wild Far Eastern leopards sampled during 1993-94, confirming previous exposure in the population. This leopard population is likely too small to maintain circulation of CDV, suggesting that infections arise from spillover from more-abundant domestic or wild carnivore reservoirs. Increasing the population size and establishment of additional populations of leopards would be important steps toward securing the future of this subspecies and reducing the risk posed by future outbreaks of CDV or other infectious diseases.

The influence of gap size on plant species diversity and composition in beech (Fagus orientalis forests, Ramsar, Mazandaran Province, North of Iran

Directory of Open Access Journals (Sweden)

MARZIEH BEGYOM-FAGHIR

2013-10-01

Full Text Available Pourbabaei H, Haddadi-Moghaddam H, Begyom-Faghir M, Abedi T. 2013. The influence of gap size on plant species diversity and composition in beech (Fagus orientalis forests, Ramsar, Mazandaran Province, North of Iran. Biodiversitas 14: 89-94.This study was conducted to investigate the influence of gap size on plant species diversity and composition in beech (Fagus orientalis Lipsky. forests, Ramsar, Mazandaran province. Fifteen gaps in small, medium, and large sizes were randomly selected. Abundance of tree saplings, shrubs and herbaceous species were counted on 4 m2 micro-plots within the gaps. Diversity indices including Shannon-Wiener, Simpson, Mc Arthur's N1, Hill's N2, species richness and Smith-Wilson’s evenness index were computed. The results revealed that there was significant difference among three gap categories in terms of diversity. The highest diversity values of tree and herbaceous species were obtained in the large gaps, while the highest diversity value of shrub species was in the medium gaps. Species composition of small gaps (28 species: 7 trees and 21 herbaceous, medium gaps (37 species: 7 trees, 5 shrubs and 25 herbaceous and large gaps (40 species: 7 trees, 4 shrubs and 29 herbaceous were recognized. Therefore, based on the results of this study, it is recommended that in order to maintain plant diversity and composition up to 400 m2 gap size cloud be used in this forests.

AOX1-Subfamily Gene Members in Olea europaea cv. "Galega Vulgar"-Gene Characterization and Expression of Transcripts during IBA-Induced in Vitro Adventitious Rooting.

Science.gov (United States)

Velada, Isabel; Grzebelus, Dariusz; Lousa, Diana; M Soares, Cláudio; Santos Macedo, Elisete; Peixe, Augusto; Arnholdt-Schmitt, Birgit; G Cardoso, Hélia

2018-02-17

Propagation of some Olea europaea L. cultivars is strongly limited due to recalcitrant behavior in adventitious root formation by semi-hardwood cuttings. One example is the cultivar "Galega vulgar". The formation of adventitious roots is considered a morphological response to stress. Alternative oxidase (AOX) is the terminal oxidase of the alternative pathway of the plant mitochondrial electron transport chain. This enzyme is well known to be induced in response to several biotic and abiotic stress situations. This work aimed to characterize the alternative oxidase 1 (AOX1)-subfamily in olive and to analyze the expression of transcripts during the indole-3-butyric acid (IBA)-induced in vitro adventitious rooting (AR) process. OeAOX1a (acc. no. MF410318) and OeAOX1d (acc. no. MF410319) were identified, as well as different transcript variants for both genes which resulted from alternative polyadenylation events. A correlation between transcript accumulation of both OeAOX1a and OeAOX1d transcripts and the three distinct phases (induction, initiation, and expression) of the AR process in olive was observed. Olive AOX1 genes seem to be associated with the induction and development of adventitious roots in IBA-treated explants. A better understanding of the molecular mechanisms underlying the stimulus needed for the induction of adventitious roots may help to develop more targeted and effective rooting induction protocols in order to improve the rooting ability of difficult-to-root cultivars.

Post-harvest physiology

Science.gov (United States)

Weather and management constraints, as well as the intended use of the harvested forage, all influence the forage harvest system selected by the producer. Generally, maximum retention of dry matter from harvested forage crops is achieved at moistures intermediate between the standing fresh crop and ...

Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

International Nuclear Information System (INIS)

Matova, S P; Elfrink, R; Vullers, R J M; Van Schaijk, R

2011-01-01

In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with adjustable resonance frequencies have been designed—one with a solid bottom and one with membrane on the bottom. The resonance frequencies of the resonators were matched to the complementing piezoelectric harvesters during harvesting. The aim of the presented work is a feasibility study on using packaged piezoelectric energy harvesters with Helmholtz resonators for airflow energy harvesting. The maximum energy we were able to obtain was 42.2 µW at 20 m s −1

Formation of a local Abramis brama orientalis (BERG) population in the zone of hot effluent from the Konakovo hydroelectric power plant

Energy Technology Data Exchange (ETDEWEB)

Sappo, G B

1976-01-01

Bream (Abramis brama orientalis) inhabitating the part of the Ivan'kovo Reservoir directly exposed to effluent from the Konakovo Hydroelectric Power Plant are smaller and become sexually mature sooner than elsewhere in the reservoir. Moreover, they have longer tail peduncles and anal, thoracic, and dorsal fins than other bream. And, in contrast with the latter, many (20 percent) have two rows of pharyngeal teeth. Thus, the differences in ecological (growth rate, condition factor, spawning times, etc.) and meristic and plastic characters (branched rays, enlarged fins, etc.) as well as in composition of parasites point to the development of an isolated bream population.

Helical Piezoelectric Energy Harvester and Its Application to Energy Harvesting Garments

Directory of Open Access Journals (Sweden)

Minsung Kim

2017-04-01

Full Text Available In this paper, we propose a helical piezoelectric energy harvester, examine its application to clothes in the form of an energy harvesting garment, and analyze its design and characteristics. The helical harvester is composed of an elastic core and a polymer piezoelectric strap twining the core. The fabricated harvester is highly elastic and can be stretched up to 158% of its initial length. Following the experiments using three different designs, the maximum output power is measured as 1.42 mW at a 3 MΩ load resistance and 1 Hz motional frequency. The proposed helical harvesters are applied at four positions of stretchable tight-fitting sportswear, namely shoulder, arm joint, knee, and hip. The maximum output voltage is measured as more than 20 V from the harvester at the knee position during intended body motions. In addition, electric power is also generated from this energy harvesting garment during daily human motions, which is about 3.9 V at the elbow, 3.1 V at the knee, and 4.4 V at the knee during push-up, walking, and squatting motions, respectively.

Rainwater harvesting - An investigation into the potential for rainwater harvesting in Bradford

OpenAIRE

Doncaster, S.; Blanksby, J.; Shepherd, W.

2012-01-01

This report provides a brief review of rainwater harvesting and rainwater harvesting tools, which are then used in case study examples for domestic, office block and warehouse rain water harvesting scenarios. Rainwater harvesting is placed in an historical context as a source of water supply and in a modern context as being complementary to centralised water distribution networks with benefits for wider water management including flood risk treatment as well as providing environmental and eco...

Bundling harvester; Nippukorjausharvesteri

Energy Technology Data Exchange (ETDEWEB)

Koponen, K [Eko-Log Oy, Kuopio (Finland)

1997-12-31

The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

Bundling harvester; Nippukorjausharvesteri

Energy Technology Data Exchange (ETDEWEB)

Koponen, K. [Eko-Log Oy, Kuopio (Finland)

1996-12-31

The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

Heat inactivation kinetics of Hypocrea orientalis β-glucosidase with enhanced thermal stability by glucose.

Science.gov (United States)

Xu, Xin-Qi; Shi, Yan; Wu, Xiao-Bing; Zhan, Xi-Lan; Zhou, Han-Tao; Chen, Qing-Xi

2015-11-01

Thermal inactivation kinetics of Hypocrea orientalis β-glucosidase and effect of glucose on thermostability of the enzyme have been determined in this paper. Kinetic studies showed that the thermal inactivation was irreversible and first-order reaction. The microscopic rate constants for inactivation of free enzyme and substrate-enzyme complex were both determined, which suggested that substrates can protect β-glucosidase against thermal deactivation effectively. On the other hand, glucose was found to protect β-glucosidase from heat inactivation to remain almost whole activity below 70°C at 20mM concentration, whereas the apparent inactivation rate of BG decreased to be 0.3×10(-3)s(-1) in the presence of 5mM glucose, smaller than that of sugar-free enzyme (1.91×10(-3)s(-1)). The intrinsic fluorescence spectra results showed that glucose also had stabilizing effect on the conformation of BG against thermal denaturation. Docking simulation depicted the interaction mode between glucose and active residues of the enzyme to produce stabilizing effect. Copyright © 2015 Elsevier B.V. All rights reserved.

Harvest time and post-harvest quality of Fuyu persimmon treated before harvest with gibberellic acid and aminoetoxyvinilglycine

Directory of Open Access Journals (Sweden)

Ricardo Antonio Ayub

2008-12-01

Full Text Available The aim of this work was to evaluate the effects of gibberellic acid (GA3 and aminoetoxyvinilglycine (AVG applied in preharvest spraying, on the retardation of the harvest and on the quality of persimmon fruits cv. Fuyu. The experiment was carried in randomized complete block design. The treatments were: control, 136mgL-1 of AVG, 272 mgL-1 of AVG, 36mgL-1 of GA3, 72mgL-1 of GA3 and 136mgL-1 of AVG + 36mgL-1 of GA3, spraying 30 days before the first harvest. The fruits were harvested twice and stored at 4ºC. The chemical and physical evaluations of the fruits were carried out the date of the harvest and at intervals of 15 days followed by four days at 20ºC. In conclusion, the application of AVG (136mgL-1 or GA3 (72mgL-1 maintained the firmness of the fruits and delayed harvest by twenty days. However, fruits harvested in the initial state of ripening were more sensitive to chilling injury and were unable to support 15 days of storage at 4ºC. The plant growth regulators were not efficient in prolonged storage due to the fact that the concentration of sugars was lower in the treatments than in the control.

heteroHarvest: Harvesting Information from Heterogeneous Sources

DEFF Research Database (Denmark)

Qureshi, Pir Abdul Rasool; Memon, Nasrullah; Wiil, Uffe Kock

2011-01-01

The abundance of information regarding any topic makes the Internet a very good resource. Even though searching the Internet is very easy, what remains difficult is to automate the process of information extraction from the available online information due to the lack of structure and the diversity...... in the sharing methods. Most of the times, information is stored in different proprietary formats, complying with different standards and protocols which makes tasks like data mining and information harvesting very difficult. In this paper, an information harvesting tool (heteroHarvest) is presented...... with objectives to address these problems by filtering the useful information and then normalizing the information in a singular non hypertext format. Finally we describe the results of experimental evaluation. The results are found promising with an overall error rate equal to 6.5% across heterogeneous formats....

Identification and Characterization of a Novel Issatchenkia orientalis GPI-Anchored Protein, IoGas1, Required for Resistance to Low pH and Salt Stress.

Directory of Open Access Journals (Sweden)

Akinori Matsushika

Full Text Available The use of yeasts tolerant to acid (low pH and salt stress is of industrial importance for several bioproduction processes. To identify new candidate genes having potential roles in low-pH tolerance, we screened an expression genomic DNA library of a multiple-stress-tolerant yeast, Issatchenkia orientalis (Pichia kudriavzevii, for clones that allowed Saccharomyces cerevisiae cells to grow under highly acidic conditions (pH 2.0. A genomic DNA clone containing two putative open reading frames was obtained, of which the putative protein-coding gene comprising 1629 bp was retransformed into the host. This transformant grew significantly at pH 2.0, and at pH 2.5 in the presence of 7.5% Na2SO4. The predicted amino acid sequence of this new gene, named I. orientalis GAS1 (IoGAS1, was 60% identical to the S. cerevisiae Gas1 protein, a glycosylphosphatidylinositol-anchored protein essential for maintaining cell wall integrity, and 58-59% identical to Candida albicans Phr1 and Phr2, pH-responsive proteins implicated in cell wall assembly and virulence. Northern hybridization analyses indicated that, as for the C. albicans homologs, IoGAS1 expression was pH-dependent, with expression increasing with decreasing pH (from 4.0 to 2.0 of the medium. These results suggest that IoGAS1 represents a novel pH-regulated system required for the adaptation of I. orientalis to environments of diverse pH. Heterologous expression of IoGAS1 complemented the growth and morphological defects of a S. cerevisiae gas1Δ mutant, demonstrating that IoGAS1 and the corresponding S. cerevisiae gene play similar roles in cell wall biosynthesis. Site-directed mutagenesis experiments revealed that two conserved glutamate residues (E161 and E262 in the IoGas1 protein play a crucial role in yeast morphogenesis and tolerance to low pH and salt stress. Furthermore, overexpression of IoGAS1 in S. cerevisiae remarkably improved the ethanol fermentation ability at pH 2.5, and at pH 2.0 in the

Toward a semi-mechanical harvesting platform system for harvesting blueberries with fresh-market quality

Science.gov (United States)

Major concerns related to harvesting blueberries for fresh market with over-the-row (OTR) harvesters are that the quality of the fruit harvested with OTR machines is generally low and ground loss is excessive. Machine-harvested blueberries have more internal bruise and usually soften rapidly in col...

Intercropping of reed canary grass, phalaris arundinacea l., with legumes can cut costs for n-fertilization

Energy Technology Data Exchange (ETDEWEB)

Palmborg, Cecilia; Lindvall, Eva (Swedish Univ. of Agricultural Sciences, Dept. of Agricultural Research for Northern Sweden, Umeaa (Sweden)), e-mail: eva.lindvall@njv.slu.se

2010-07-15

In a field experiment close to Oestersund in mid Sweden reed canary grass was intercropped with barley, Alsike clover, Trifolium hybridum L., red clover, T. pratense L., goats rue, Galega orientalis L. or a combination of red clover and goats rue. There were also three fertilization treatments: A: Recommended amounts of N, P and K. B: Recommended amounts of P and K and half amount of N. C: Sewage sludge application before sowing (establishment year) and recommended amounts of P and K and half amount of N. The biomass was lower where reed canary grass had been undersown in barley, and higher with full N-fertilization than with half N-fertilization. However there were no significant differences between legume intercrops with half N-fertilization and pure reed canary grass with full Nfertilization. Alsike clover was the most productive legume, followed by red clover. The amount of nitrogen fixed by the legumes was less with full N-fertilization (29 kg/ha as a mean) than with half N-fertilization (38 kg/ha). Intercropping with legumes could substitute half of the N in fertilization but similar experiments in other parts of Sweden has shown that there is a higher risk of weed problems

Development of multi-functional combine harvester with grain harvesting and straw baling

International Nuclear Information System (INIS)

Tang, Z.; Li, Y.; Cheng, C.

2017-01-01

The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

Development of multi-functional combine harvester with grain harvesting and straw baling

Energy Technology Data Exchange (ETDEWEB)

Tang, Z.; Li, Y.; Cheng, C.

2017-09-01

The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

AOX1-Subfamily Gene Members in Olea europaea cv. “Galega Vulgar”—Gene Characterization and Expression of Transcripts during IBA-Induced in Vitro Adventitious Rooting

Science.gov (United States)

Lousa, Diana; M. Soares, Cláudio; Santos Macedo, Elisete; Arnholdt-Schmitt, Birgit

2018-01-01

Propagation of some Olea europaea L. cultivars is strongly limited due to recalcitrant behavior in adventitious root formation by semi-hardwood cuttings. One example is the cultivar ”Galega vulgar”. The formation of adventitious roots is considered a morphological response to stress. Alternative oxidase (AOX) is the terminal oxidase of the alternative pathway of the plant mitochondrial electron transport chain. This enzyme is well known to be induced in response to several biotic and abiotic stress situations. This work aimed to characterize the alternative oxidase 1 (AOX1)-subfamily in olive and to analyze the expression of transcripts during the indole-3-butyric acid (IBA)-induced in vitro adventitious rooting (AR) process. OeAOX1a (acc. no. MF410318) and OeAOX1d (acc. no. MF410319) were identified, as well as different transcript variants for both genes which resulted from alternative polyadenylation events. A correlation between transcript accumulation of both OeAOX1a and OeAOX1d transcripts and the three distinct phases (induction, initiation, and expression) of the AR process in olive was observed. Olive AOX1 genes seem to be associated with the induction and development of adventitious roots in IBA-treated explants. A better understanding of the molecular mechanisms underlying the stimulus needed for the induction of adventitious roots may help to develop more targeted and effective rooting induction protocols in order to improve the rooting ability of difficult-to-root cultivars. PMID:29462998

Stand, Harvest, and Equipment Interactions in Simulated Harvesting Prescriptions

Science.gov (United States)

Jingxin Wang; W. Dale Greene; Bryce J. Stokes

1998-01-01

We evaluated potential interactions of stand type, harvesting method, and equipment in an experiment using interactive simulation. We examined three felling methods (chain saw, feller-buncher, harvester) and two extraction methods (grapple skidder and forwarder) performing clearcuts, sheltenvood cuts, and single-tree selection cuts in both an uneven-aged natural stand...

Effect of time of harvest, stage of fruit ripening, and post-harvest ...

African Journals Online (AJOL)

Seeds were extracted from half of the fruits harvested from each stage immediately after harvest while the other halves were stored at room temperature to ripen to the soft-red stage before seed extraction. Fruit weight in both cultivars decreased with plant age. Fruits harvested at the yellow-ripe stage produced the highest ...

Seroprevalence of Toxoplasma gondii in free-living European mouflon (Ovis orientalis musimon hunted in central Germany

Directory of Open Access Journals (Sweden)

Heddergott Mike

2018-01-01

Full Text Available Despite increasing consumption of mouflon (Ovis orientalis musimon meat in Germany, there is currently no surveillance of Toxoplasma gondii infection in populations of these animals and generally little knowledge about the prevalence of this protozoan in German wild ungulates. Between 2011 and 2015, we collected 138 blood samples from a free-living mouflon population in central German and tested sera for the presence of T. gondii antibodies using a modified agglutination test (MAT, cut-off 1:20. Antibodies were detected in 31 of the 138 samples (22.46%. There was a significant difference in seroprevalence between the different age classes, with antibodies to T. gondii more frequent in adults. In contrast, there was no significant difference in seroprevalence depending on sex and year of sample collection. Game meat is frequently consumed as raw or undercooked meat and may therefore represent a potential source of human infection with T. gondii.

Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

NARCIS (Netherlands)

Matova, S.P.; Elfrink, R.; Vullers, R.J.M.; Schaijk, R. van

2011-01-01

In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with

Fog Harvesting with Harps.

Science.gov (United States)

Shi, Weiwei; Anderson, Mark J; Tulkoff, Joshua B; Kennedy, Brook S; Boreyko, Jonathan B

2018-04-11

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture microscopic fog droplets, whereas fine meshes suffer from clogging issues. Here, we design and fabricate fog harvesters comprising an array of vertical wires, which we call "fog harps". Under controlled laboratory conditions, the fog-harvesting rates for fog harps with three different wire diameters were compared to conventional meshes of equivalent dimensions. As expected for the mesh structures, the mid-sized wires exhibited the largest fog collection rate, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog-harvesting rate continually increased with decreasing wire diameter for the fog harps due to efficient droplet shedding that prevented clogging. This resulted in a 3-fold enhancement in the fog-harvesting rate for the harp design compared to an equivalent mesh.

A new harvest operation cost model to evaluate forest harvest layout alternatives

Science.gov (United States)

Mark M. Clark; Russell D. Meller; Timothy P. McDonald; Chao Chi Ting

1997-01-01

The authors develop a new model for harvest operation costs that can be used to evaluate stands for potential harvest. The model is based on felling, extraction, and access costs, and is unique in its consideration of the interaction between harvest area shapes and access roads. The scientists illustrate the model and evaluate the impact of stand size, volume, and road...

Microalgae harvesting techniques: A review.

Science.gov (United States)

Singh, Gulab; Patidar, S K

2018-07-01

Microalgae with wide range of commercial applications have attracted a lot of attention of the researchers in the last few decades. However, microalgae utilization is not economically sustainable due to high cost of harvesting. A wide range of solid - liquid separation techniques are available for microalgae harvesting. The techniques include coagulation and flocculation, flotation, centrifugation and filtration or a combination of various techniques. Despite the importance of harvesting to the economics and energy balance, there is no universal harvesting technique for microalgae. Therefore, this review focuses on assessing technical, economical and application potential of various harvesting techniques so as to allow selection of an appropriate technology for cost effectively harvesting of microalgae from their culture medium. Various harvesting and concentrating techniques of microalgae were reviewed to suggest order of suitability of the techniques for four main microalgae applications i.e biofuel, human and animal food, high valued products, and water quality restoration. For deciding the order of suitability, a comparative analysis of various harvesting techniques based on the six common criterions (i.e biomass quality, cost, biomass quantity, processing time, species specific and toxicity) has been done. Based on the order of various techniques vis-a-vis various criteria and preferred order of criteria for various applications, order of suitability of harvesting techniques for various applications has been decided. Among various harvesting techniques, coagulation and flocculation, centrifugation and filtration were found to be most suitable for considered applications. These techniques may be used alone or in combination for increasing the harvesting efficiency. Copyright © 2018 Elsevier Ltd. All rights reserved.

Timber harvest as the predominant disturbance regime in northeastern U.S. forests: Effects of harvest intensification

Science.gov (United States)

Brown, Michelle L.; Canham, Charles D.; Murphy, Lora; Donovan, Therese M.

2018-01-01

Harvesting is the leading cause of adult tree mortality in forests of the northeastern United States. While current rates of timber harvest are generally sustainable, there is considerable pressure to increase the contribution of forest biomass to meet renewable energy goals. We estimated current harvest regimes for different forest types and regions across the U.S. states of New York, Vermont, New Hampshire, and Maine using data from the U.S. Forest Inventory and Analysis Program. We implemented the harvest regimes in SORTIE‐ND, an individual‐based model of forest dynamics, and simulated the effects of current harvest regimes and five additional harvest scenarios that varied by harvest frequency and intensity over 150 yr. The best statistical model for the harvest regime described the annual probability of harvest as a function of forest type/region, total plot basal area, and distance to the nearest improved road. Forests were predicted to increase in adult aboveground biomass in all harvest scenarios in all forest type and region combinations. The magnitude of the increase, however, varied dramatically—increasing from 3% to 120% above current landscape averages as harvest frequency and intensity decreased. The variation can be largely explained by the disproportionately high harvest rates estimated for Maine as compared with the rest of the region. Despite steady biomass accumulation across the landscape, stands that exhibited old‐growth characteristics (defined as ≥300 metric tons of biomass/hectare) were rare (8% or less of stands). Intensified harvest regimes had little effect on species composition due to widespread partial harvesting in all scenarios, resulting in dominance by late‐successional species over time. Our analyses indicate that forest biomass can represent a sustainable, if small, component of renewable energy portfolios in the region, although there are tradeoffs between carbon sequestration in forest biomass and sustainable

An investigation on roundwood extraction of Fagus orientalis lipsky ...

African Journals Online (AJOL)

In Turkish forestry, the most common harvesting method is cut-to-length system, which is carried out intensively during the late spring and summer, as well as during the winter with a limited extent. In this study ... The average total time of shift was measured as 13.10 min for uphill logging and 22.92 min for downhill logging.

Cloisonné kidney in mouflon sheep (Ovis orientalis musimon

Directory of Open Access Journals (Sweden)

Hervás, J.

2002-12-01

Full Text Available This study describes a case of cloisonné kidney associated with infection by Babesia ovis in a wild mouflon (Ovis orientalis musimonj found dead in year in eastern Sierra Morena (Andalusia, Spain. The major macroscopic lesions were a icteric coloration in ocular and oral mucosa, and b dark metal coloration on the kidneys' external surface. Intense dark coloration alternating with intense greyish strips was observed on renal cortex sections. Blood samples were collected for haematological and parasitological analyses, as well as samples from various organs for histopathological examination. Infection by B. ovis was confirmed by using the Polymerase Chain Reaction test (PCR. Histopathological examination revealed tubulonephrosis associated with thickening of the basal membrane of the convoluted portions of the renal tubules (both proximal and distal, which took on an intense brownish pigmentation. These renal lesions have been described as "cloisonné" kidney. Cloisonné kidneys show uncommon coloring of the renal tubular system, associated with ferritin and hemosiderin deposits in these structures resulting from a chronic hemolitic process (hemoparasites, toxins, etc.. In our case, hemolitic phenomena are associated with infection by B. ovis. The seroprevalence of this hemoparasite in wild mouflon populations in other regions of Spain (Catalonia is up to 15%.

[fr]
Nous étudions un cas de rein cloisonné associé à l'infection par Babesia ovis sur un mouflon sauvage (Ovis orientalis musimon qui a été trouvé la même année dans la partie orientale de la Sierra Morena (Andalousie, Espagne. Les principales lésions macroscopiques étaient: a coloration ictérique sur les muqueuses oculaire et orale, et b coloration métallique foncée sur la partie extérieure du rein. Cette coloration foncée intense alternait avec des bandes grisâtres dans les sections du cortex rénal. Nous avons pris

Design optimization of harvester head and actuation system of forest harvester

DEFF Research Database (Denmark)

Andersen, Torben Ole; Hansen, Michael R.; Mouritsen, Ole Ø.

2005-01-01

This paper is on the analysis and subsequent efficiency optimization of a forrest harvester. As basis for the optimization the existing machine has undergone substantial experimental testing with a view to determine the loading that the harvester head is subjected to and also the corresponding...

Harvest of table olives by mechanical harvesting equipment

Directory of Open Access Journals (Sweden)

Filippo Gambella

2013-09-01

Full Text Available In this work, we have evaluated the performance, of an electric comb equipped with five undulated fingers used for mechanized the harvesting of table olives. The first aim of the work was to test three different types of coating materials used for covering the fingers: Silicon (S, Vulcanized rubber (VR and Natural rubber (NR. The diameter of the coating materials tested were 7mm (D1, 14 mm (D2, 19 mm (D3 in order to evaluate the damage of different working conditions on the intact olives. During harvesting, silicon at 7mm and 14mm resulted in the largest percentage of undamaged the fruit (67% and 65%, natural rubber 63% and vulcanized rubber at the 54%. The second aim was to evaluate the combination, in terms of the best performance, of the machines used for mechanized harvesting of table olives. Several factors have been examined: undulating fingers variation thickness, different rotational speeds and different coating materials used to reduce the impact damage on olives. From the tests on olive tree we have determined that while plastic materials (S and (NR appear to have a positive role in harvest quality, the vibration transmitted to the operator’s hand is great from 6.48 m/s2 for S to 6.31 m/ s2 for NR and 2.92 m/s2 for VR, respect to the materials used.

Radio Frequency Energy Harvesting Sources

Directory of Open Access Journals (Sweden)

Action NECHIBVUTE

2017-12-01

Full Text Available This radio frequency (RF energy harvesting is an emerging technology and research area that promises to produce energy to run low-power wireless devices. The great interest that has recently been paid to RF harvesting is predominantly driven by the great progress in both wireless communication systems and broadcasting technologies that have availed a lot of freely propagating ambient RF energy. The principle aim of an RF energy harvesting system is to convert the received ambient RF energy into usable DC power. This paper presents a state of the art concise review of RF energy harvesting sources for low power applications, and also discusses open research questions and future research directions on ambient RF energy harvesting.

Harvesting a short rotation forest

Energy Technology Data Exchange (ETDEWEB)

Perttu, K L [ed.

1984-12-01

Willow and Sallow, considered of great interest for Swedish conditions, present new problems in harvesting. Traditional logging techniques offer few elements of equipment or methods. Light whips may be comminuted to a bulk product, easy to handle, difficult to store, requiring a hot logging system - and requiring a heavy, powerful harvester. Aggregating the material introduces an intermediate wood-fuel unit, suitable for storing, transport and infeed into any comminuter. If the harvester produced billets it would require less energy for its operation and it may be used for other purposes such as pre-commercial thinning or row thinning during the growing season. A few groups of designers have worked on analyses of requirements and possible solutions. Test rigs for severing and bundling were built and evaluated. Public funding was made available for design work on harvesters. Five groups were selected to produce layout designs of large and small harvesters. An evaluation procedure was performed, leading to selection of two concepts, slightly reworked from their original shapes. One is a large self-propelled front-sutting harvester, the other is a harvesting unit to be mounted on a suitable farm tractor. With 3 refs.

The potential of mycorrhizal inoculation and organic amendment to increase yields of Galega orientalis and Helianthus tuberosus in a spoilbank substrate

Czech Academy of Sciences Publication Activity Database

Püschel, David; Rydlová, Jana; Sudová, Radka; Gryndler, M.; Vosátka, Miroslav

2011-01-01

Roč. 174, č. 4 (2011), s. 664-672 ISSN 1436-8730 R&D Projects: GA MŠk 1M0571 Institutional research plan: CEZ:AV0Z60050516 Keywords : arbuscular mycorrhiza * biomass crops * spoil-bank reclamation Subject RIV: EF - Botanics Impact factor: 1.596, year: 2011

High relative humidity pre-harvest reduces post-harvest proliferation of Salmonella in tomatoes.

Science.gov (United States)

Devleesschauwer, Brecht; Marvasi, Massimiliano; Giurcanu, Mihai C; Hochmuth, George J; Speybroeck, Niko; Havelaar, Arie H; Teplitski, Max

2017-09-01

Outbreaks of human illness caused by enteric pathogens such as Salmonella are increasingly linked to the consumption of fruits and vegetables. Knowledge on the factors affecting Salmonella proliferation on fresh produce therefore becomes increasingly important to safeguard public health. Previous experiments showed a limited impact of pre-harvest production practices on Salmonella proliferation on tomatoes, but suggested a significant effect of harvest time. We explored the data from two previously published and one unpublished experiment using regression trees, which allowed overcoming the interpretational difficulties of classical statistical models with higher order interactions. We assessed the effect of harvest time by explicitly modeling the climatic conditions at harvest time and by performing confirmatory laboratory experiments. Across all datasets, regression trees confirmed the dominant effect of harvest time on Salmonella proliferation, with humidity-related factors emerging as the most important underlying climatic factors. High relative humidity the week prior to harvest was consistently associated with lower Salmonella proliferation. A controlled lab experiment confirmed that tomatoes containing their native epimicrobiota supported significantly lower Salmonella proliferation when incubated at higher humidity prior to inoculation. The complex interactions between environmental conditions and the native microbiota of the tomato crop remain to be fully understood. Copyright © 2017 Elsevier Ltd. All rights reserved.

Harvesting of short rotation coppice. Harvesting trials with a cut and storage system in Germany

Energy Technology Data Exchange (ETDEWEB)

Schweier, J.; Becker, G.

2012-11-01

Short rotation coppice (SRC) harvesting techniques are available in Germany, but broad experience and knowledge about machine performance and the related effective costs of harvesting operations are still missing. This information is crucial, as harvesting costs strongly influence the economic performance of the overall supply chain. Therefore, it was the aim of this study to collect and analyze productivity data of different harvesting systems for SRC. The combined cut and chip system on the one hand and the cut and storage system on the other hand were studied by literature review. Several studies analyze the combined cut and chip systems and the reported machine productivities showed great variations. The average was 30 green tons per scheduled machine hour (gt smh{sup -1}). Few studies are analysing the cut and storage system. They report that machines still are under development and that further research is needed. Therefore, time studies of harvesting operations using the cut and storage system were carried out. Five trials were performed with the harvesting machine 'Stemster MK III' developed by Nordic Biomass. The share of productive working time was 85% and the average productivity was 21 gt smh{sup -1}. These results were compared with values from the literature. Resulting harvesting costs were calculated per oven dry ton (Euro odt{sup -1}). The advantages and disadvantages of both harvesting systems are highlighted. (orig.)

Anti-Proliferative Effects of Siegesbeckia orientalis Ethanol Extract on Human Endometrial RL-95 Cancer Cells

Directory of Open Access Journals (Sweden)

Chi-Chang Chang

2014-12-01

Full Text Available Endometrial cancer is a common malignancy of the female genital tract. This study demonstrates that Siegesbeckia orientalis ethanol extract (SOE significantly inhibited the proliferation of RL95-2 human endometrial cancer cells. Treating RL95-2 cells with SOE caused cell arrest in the G2/M phase and induced apoptosis of RL95-2 cells by up-regulating Bad, Bak and Bax protein expression and down-regulation of Bcl-2 and Bcl-xL protein expression. Treatment with SOE increased protein expression of caspase-3, -8 and -9 dose-dependently, indicating that apoptosis was through the intrinsic and extrinsic apoptotic pathways. Moreover, SOE was also effective against A549 (lung cancer, Hep G2 (hepatoma, FaDu (pharynx squamous cancer, MDA-MB-231 (breast cancer, and especially on LNCaP (prostate cancer cell lines. In total, 10 constituents of SOE were identified by Gas chromatography-mass analysis. Caryophyllene oxide and caryophyllene are largely responsible for most cytotoxic activity of SOE against RL95-2 cells. Overall, this study suggests that SOE is a promising anticancer agent for treating endometrial cancer.

Energy harvesting for microsystems

Energy Technology Data Exchange (ETDEWEB)

Ruichao Xu

2012-05-15

The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 {mu}m silicon layer and 10-30 {mu}m screen printed PZT layer, anchored on a silicon frame at one end and attached to a silicon proof mass at the other. Electrodes will cover both side of the PZT layer, so the harvested energy can be collected electrically. The second archetype has a bimorph cantilever beam, which consists of two 15-35 {mu}m PZT layers, anchored on a silicon frame at the one end and attached to a silicon proof mass at the other. Electrodes are deposited below, between and above the two PZT layers. The root mean square (RMS) power output measured on this type of harvesters is as high as 37.1{mu}W at 1 g. The third archetype is similar to the first one, the screen printed PZT layer is replaced by a lead free piezoelectric material, (KxNa1-x)NbO3 (KNN). Some of the major challenges encountered during the development processes are bad adhesion, fragile structures and short circuiting through the PZT layer. All of which have being fully or partially solved in this project. The final energy harvesters are designed to be used in an energy harvester powered wireless sensing system. (Author)

Comparison of Postoperative Pain Relief by Intercostal Block Between Pre-rib Harvest and Post-rib Harvest Groups

International Nuclear Information System (INIS)

Bashir, M. M.; Shahzad, M. A.; Yousaf, M. N.; Khan, B. A.; Khan, F. A.

2014-01-01

Objective: To compare intercostal nerve block before and after rib harvest in terms of mean postoperative pain score and mean postoperative tramadol usage. Study Design: Randomized controlled trial. Place and Duration of Study: Department of Plastic Surgery, Mayo Hospital, KEMU, Lahore, from January 2011 to July 2012. Methodology: Patients (n = 120) of either gender with ASA class-I and II requiring autogenous costal cartilage graft were inducted. Patients having history of local anaesthetic hypersensitivity and age 60 years were excluded. Subjects were randomly assigned to pre-rib harvest (group-1) and post-rib harvest (group-2). Local anaesthetic mixture was prepared by adding 10 milliliters 2% lidocaine to 10 milliliters 0.5% bupivacaine to obtain a total 20 ml solution. Group-1 received local anaesthetic infiltration along the proposed incision lines and intercostals block before the rib harvest. Group-2 received the infiltration and block after rib harvest. Postoperative consumption of tramadol and pain scores were measured at 6 and 12 hours postoperatively using VAS. Results: Mean age was 31.43 A +- 10.78 years. The mean pain scores at 6 hours postoperatively were 1.033 A +- 0.609 and 2.4667 A +- 0.812 in pre-rib harvest and post-rib harvest groups respectively (p < 0.0001). The mean pain scores at 12 hours postoperatively were 1.45 A +- 0.565 and 3.65 A +- 0.633 in pre-rib harvest and post-rib harvest groups respectively (p < 0.0001). The mean tramadol used postoperatively in first 24 hours was 169 A +- 29.24 mg and 255 A +- 17.70 mg in prerib harvest and post-rib harvest groups respectively (p < 0.0001). Conclusion: Intercostal block administered before rib harvest as preemptive strategy result in decreased postoperative pain scores and narcotic use. (author)

MECHANIZED HARVESTING TESTS PERFORMED BY GRAPE HARVESTERS IN SUPER INTENSIVE OLIVE ORCHARD CULTIVATION IN SPAIN

Directory of Open Access Journals (Sweden)

Gennaro Giametta

2009-06-01

Full Text Available Today also those countries boasting a century-old olive growing tradition have to look at the latest, most dynamic, non labour-intensive olive growing systems to abate production (notably, harvesting operations costs and remain competitive in a globalized market. This is why over the last few years super intensive olive orchard cultivation has been attracting a lot of interest on the part of olive growers all over the world as it accounts for an innovative model whereby olive groves are tailored to the special needs of grape harvesters. This paper reports the first results of experimental mechanical harvesting tests in a super-intensive olive cultivation. The study is intended to explore both productivity and work capacity of two of the most commonly used grape harvesters, Grégoire G120SW and New Holland Braud VX680, in a view to assessing their harvesting performance by a series of tests conducted in Spain. On the basis of the tests it was possible to verify that the machines are able to detach the almost all the drupes (more than 90%, with one only passage, and this independently of both size and location of drupes on the tree crown and of their maturity stage. Using these machines, two people can often carry out the whole harvest process: an operator driving the harvester and another person transferring the fruit from the harvester in the field to the olive oil mill for processing. With this system, the work speed is usually, in the best working conditions, about 1.7 km/hour and the average harvesting time is about 2.5-3 hours/ha. For the time being it is however impossible to draw definitive conclusions in terms of performance of the above cultivation systems and harvesting machines. Additional key observational studies are needed in the years to come to assess the efficiency of the entire model.

Energy-Harvesting Wireless Sensor Networks

DEFF Research Database (Denmark)

Fafoutis, Xenofon; Vuckovic, Dusan; Di Mauro, Alessio

2012-01-01

Energy Harvesting comprises a promising solution to one of the key problems faced by battery-powered Wireless Sensor Networks, namely the limited nature of the energy supply (finite battery capacity). By harvesting energy from the surrounding environment, the sensors can have a continuous lifetime...... Sensor Networks with energy harvesting capability....... without any needs for battery recharge or replacement. However, energy harvesting introduces a change to the fundamental principles based on which WSNs are designed and realized. In this poster we sketch some of the key research challenges as well as our ongoing work in designing and realizing Wireless...

Assessment of abandoned agricultural land resource for bio-energy production in Estonia

Energy Technology Data Exchange (ETDEWEB)

Kukk, Liia; Astover, Alar; Roostalu, Hugo; Suuster, Elsa; Noormets, Merrit; Sepp, Kalev (Estonian Univ. of Life Sciences, Inst. of Agricultural and Environmental Sciences, Tartu (Estonia)); Muiste, Peeter (Estonian Univ. of Life Sciences, Inst. of Forestry and Rural Engineering, Tartu (Estonia))

2010-03-15

The current study locates and quantifies abandoned agricultural areas using the Geographic Information System (GIS) and evaluates the suitability of abandoned fields for bio-energy production in Tartumaa (Tartu County) in Estonia. Soils of abandoned areas are generally of low quality and thereby limited suitability for crop production; as a result soil-crop suitability analyses could form the basis of knowledge-based bio-energy planning. The study estimated suitable areas for bio-energy production using willow (Salix sp), grey alder [Alnus incana (L.) Moench], hybrid aspen (Populus tremuloides Michx.Populus tremula L.), reed canary grass (Phalaris arundinacea L.), and Caucasian goat's rue (Galega orientalis Lam.) in separate plantations. A combined land-use strategy is also presented as these crops are partially suitable to the same areas. Reed canary grass and grey alder have the highest energy potentials and each would re-use more than 80% of the available abandoned agricultural land. Energy grasses and short-rotation forestry in combined land-use strategy represents the opportunity of covering approximately a quarter of county's annual energy demand. The study estimates only agronomic potential, so further bio-energy analysis should take into account technical and economic limitations. Developed framework supports knowledge-based decision-making processes from field to regional scale to achieve sustainable bio-energy production

Cantilever piezoelectric energy harvester with multiple cavities

International Nuclear Information System (INIS)

S Srinivasulu Raju; M Umapathy; G Uma

2015-01-01

Energy harvesting employing piezoelectric materials in mechanical structures such as cantilever beams, plates, diaphragms, etc, has been an emerging area of research in recent years. The research in this area is also focused on structural tailoring to improve the harvested power from the energy harvesters. Towards this aim, this paper presents a method for improving the harvested power from a cantilever piezoelectric energy harvester by introducing multiple rectangular cavities. A generalized model for a piezoelectric energy harvester with multiple rectangular cavities at a single section and two sections is developed. A method is suggested to optimize the thickness of the cavities and the number of cavities required to generate a higher output voltage for a given cantilever beam structure. The performance of the optimized energy harvesters is evaluated analytically and through experimentation. The simulation and experimental results show that the performance of the energy harvester can be increased with multiple cavities compared to the harvester with a single cavity. (paper)

Energy harvesting for microsystems

DEFF Research Database (Denmark)

Xu, Ruichao

The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has...... the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate...... power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 µm silicon layer and 10-30 µm screen printed...

Applying New Technologies to Transform Blueberry Harvesting

Directory of Open Access Journals (Sweden)

Fumiomi Takeda

2017-05-01

Full Text Available The growth of the blueberry industry in the past three decades has been remarkably robust. However, a labor shortage for hand harvesting, increasingly higher labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study, we evaluated semi-mechanical harvesting systems consisting of a harvest-aid platform with soft fruit catching surfaces that collected the fruit detached by portable, hand-held, pneumatic shakers. The softer fruit catching surfaces were not glued to the hard sub-surfaces of the harvest-aid platform, but suspended over them. Also, the ergonomic aspect of operating powered harvesting equipment was determined. The pneumatic shakers removed 3.5 to 15 times more fruit (g/min than by hand. Soft fruit catching surfaces reduced impact force and bruise damage. Fruit firmness was higher in fruit harvested by hand compared to that by pneumatic shakers in some cultivars. The bruise area was less than 8% in fruit harvested by hand and with semi-mechanical harvesting system. The percentage of blue, packable fruit harvested by pneumatic shakers comprised as much as 90% of the total, but less than that of hand-harvested fruit. The ergonomic analysis by electromyography showed that muscle strain in the back, shoulders, and forearms was low in workers operating the light-weight, pneumatic shakers that were tethered to the platform with a tool balancer. The new harvesting method can reduce the labor requirement to about 100 hour/hectare/year and help to mitigate the rising labor cost and shortage of workers for harvesting fresh-market quality blueberries.

Review of magnetostrictive vibration energy harvesters

Science.gov (United States)

Deng, Zhangxian; Dapino, Marcelo J.

2017-10-01

The field of energy harvesting has grown concurrently with the rapid development of portable and wireless electronics in which reliable and long-lasting power sources are required. Electrochemical batteries have a limited lifespan and require periodic recharging. In contrast, vibration energy harvesters can supply uninterrupted power by scavenging useful electrical energy from ambient structural vibrations. This article reviews the current state of vibration energy harvesters based on magnetostrictive materials, especially Terfenol-D and Galfenol. Existing magnetostrictive harvester designs are compared in terms of various performance metrics. Advanced techniques that can reduce device size and improve performance are presented. Models for magnetostrictive devices are summarized to guide future harvester designs.

Performance evaluation of prototype mechanical cassava harvester ...

African Journals Online (AJOL)

Large-scale cassava harvesting, especially during the dry season, is a major constraint to its industrial demand and commercial production. Manual harvesting is slow and ... Results from field trials showed prototype harvesters weighing 268 – 310 kg can achieve optimum performance on ridged landforms. When harvested ...

Flow Energy Piezoelectric Bimorph Nozzle Harvester

Science.gov (United States)

Sherrit, Stewart (Inventor); Walkemeyer, Phillip E. (Inventor); Hall, Jeffrey L. (Inventor); Lee, Hyeong Jae (Inventor); Colonius, Tim (Inventor); Tosi, Phillipe (Inventor); Kim, Namhyo (Inventor); Sun, Kai (Inventor); Corbett, Thomas Gary (Inventor); Arrazola, Alvaro Jose (Inventor)

2016-01-01

A flow energy harvesting device having a harvester pipe includes a flow inlet that receives flow from a primary pipe, a flow outlet that returns the flow into the primary pipe, and a flow diverter within the harvester pipe having an inlet section coupled to the flow inlet, a flow constriction section coupled to the inlet section and positioned at a midpoint of the harvester pipe and having a spline shape with a substantially reduced flow opening size at a constriction point along the spline shape, and an outlet section coupled to the constriction section. The harvester pipe may further include a piezoelectric structure extending from the inlet section through the constriction section and point such that the fluid flow past the constriction point results in oscillatory pressure amplitude inducing vibrations in the piezoelectric structure sufficient to cause a direct piezoelectric effect and to generate electrical power for harvesting.

Predicting Future Seed Sourcing of Platycladus orientalis (L. for Future Climates Using Climate Niche Models

Directory of Open Access Journals (Sweden)

Xian-Ge Hu

2017-12-01

Full Text Available Climate niche modeling has been widely used to assess the impact of climate change on forest trees at the species level. However, geographically divergent tree populations are expected to respond differently to climate change. Considering intraspecific local adaptation in modeling species responses to climate change will thus improve the credibility and usefulness of climate niche models, particularly for genetic resources management. In this study, we used five Platycladus orientalis (L. seed zones (Northwestern; Northern; Central; Southern; and Subtropical covering the entire species range in China. A climate niche model was developed and used to project the suitable climatic conditions for each of the five seed zones for current and various future climate scenarios (Representative Concentration Pathways: RCP2.6, RCP4.5, RCP6.0, and RCP8.5. Our results indicated that the Subtropical seed zone would show consistent reduction for all climate change scenarios. The remaining seed zones, however, would experience various degrees of expansion in suitable habitat relative to their current geographic distributions. Most of the seed zones would gain suitable habitats at their northern distribution margins and higher latitudes. Thus, we recommend adjusting the current forest management strategies to mitigate the negative impacts of climate change.

Chemical composition and methane yield of reed canary grass as influenced by harvesting time and harvest frequency

DEFF Research Database (Denmark)

Kandel, Tanka Prasad; Sutaryo, Sutaryo; Møller, Henrik Bjarne

2013-01-01

This study examined the influence of harvest time on biomass yield, dry matter partitioning, biochemical composition and biological methane potential of reed canary grass harvested twice a month in one-cut (OC) management. The regrowth of biomass harvested in summer was also harvested in autumn...... as a two-cut management with (TC-F) or without (TC-U) fertilization after summer harvest. The specific methane yields decreased significantly with crop maturity that ranged from 384 to 315 and from 412 to 283 NL (normal litre) (kg VS)-1 for leaf and stem, respectively. Approximately 45% more methane...... was produced by the TC-F management (5430 Nm3 ha-1) as by the OC management (3735 Nm3 ha-1). Specific methane yield was moderately correlated with the concentrations of fibre components in the biomass. Larger quantity of biogas produced at the beginning of the biogas assay from early harvested biomass...

Quantifying mercury isotope dynamics in captive Pacific bluefin tuna (Thunnus orientalis

Directory of Open Access Journals (Sweden)

Sae Yun Kwon

2016-02-01

Full Text Available Abstract Analyses of mercury (Hg isotope ratios in fish tissues are used increasingly to infer sources and biogeochemical processes of Hg in natural aquatic ecosystems. Controlled experiments that can couple internal Hg isotope behavior with traditional isotope tracers (δ13C, δ15N can improve the applicability of Hg isotopes as natural ecological tracers. In this study, we investigated changes in Hg isotope ratios (δ202Hg, Δ199Hg during bioaccumulation of natural diets in the pelagic Pacific bluefin tuna (Thunnus orientalis; PBFT. Juvenile PBFT were fed a mixture of natural prey and a dietary supplement (60% Loligo opalescens, 31% Sardinops sagax, 9% gel supplement in captivity for 2914 days, and white muscle tissues were analyzed for Hg isotope ratios and compared to time in captivity and internal turnover of δ13C and δ15N. PBFT muscle tissues equilibrated to Hg isotope ratios of the dietary mixture within ∼700 days, after which we observed a cessation in further shifts in Δ199Hg, and small but significant negative δ202Hg shifts from the dietary mixture. The internal behavior of Δ199Hg is consistent with previous fish studies, which showed an absence of Δ199Hg fractionation during Hg bioaccumulation. The negative δ202Hg shifts can be attributed to either preferential excretion of Hg with higher δ202Hg values or individual variability in captive PBFT feeding preferences and/or consumption rates. The overall internal behavior of Hg isotopes is similar to that described for δ13C and δ15N, though observed Hg turnover was slower compared to carbon and nitrogen. This improved understanding of internal dynamics of Hg isotopes in relation to δ13C and δ15N enhances the applicability of Hg isotope ratios in fish tissues for tracing Hg sources in natural ecosystems.

Magnetic Nanocomposite Cilia Energy Harvester

KAUST Repository

Khan, Mohammed Asadullah; Alfadhel, Ahmed; Kosel, Jü rgen

2016-01-01

An energy harvester capable of converting low frequency vibrations into electrical energy is presented. The operating principle, fabrication process and output characteristics at different frequencies are discussed. The harvester is realized

1970 Oregon timber harvest.

Science.gov (United States)

Brian R. Wall

1971-01-01

The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

A Hip Implant Energy Harvester

Science.gov (United States)

Pancharoen, K.; Zhu, D.; Beeby, S. P.

2014-11-01

This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω.

A Hip Implant Energy Harvester

International Nuclear Information System (INIS)

Pancharoen, K; Zhu, D; Beeby, S P

2014-01-01

This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω

Approaches to automated protein crystal harvesting

Energy Technology Data Exchange (ETDEWEB)

Deller, Marc C., E-mail: mdeller@scripps.edu; Rupp, Bernhard, E-mail: mdeller@scripps.edu

2014-01-28

Approaches to automated and robot-assisted harvesting of protein crystals are critically reviewed. While no true turn-key solutions for automation of protein crystal harvesting are currently available, systems incorporating advanced robotics and micro-electromechanical systems represent exciting developments with the potential to revolutionize the way in which protein crystals are harvested.

Sustainable harvest of waterbirds: a global review

DEFF Research Database (Denmark)

Kanstrup, Niels

ABSTRACT Waterbirds have a long tradition of being harvested in various ways. In many countries, the harvest takes place as a primary food source, but recreational hunting is also very popular. Various methods are used. Subsistence hunting of waterbirds has a history that dates back to the dawn...... and the degree of stability in local communities obtained through nature conservation. In many countries there is a long tradition of detailed wildlife harvest management including programmes for bag surveys and monitoring of harvest levels. In most countries, however, the management of waterbird harvests...

Mechanical harvesting of pumpkin seeds

OpenAIRE

Sito, Stjepan; Ivančan, Stjepan; Barković, Edi; Mucalo, Ana

2009-01-01

One of the key problems in production technology of pumpkin seed for oil production is mechanized harvesting and losses of seed during mechanical harvesting. The losses of pumpkin seed during mechanical harvesting at peripheral velocity of 1.57 m/s (optimally adjusted machine) were 4.4% for Gleisdorf species, 5.2% for Slovenska species and 7.8% for pumpkin with husk. The higher average losses of pumpkin seed with husk were caused by tight connection of seed and pumpkin fruit.

Maple Sugar Harvesting/Wild Rice Harvesting.

Science.gov (United States)

Minneapolis Public Schools, MN.

Comprised of two separate booklets, this resource unit assists elementary teachers in explaining how the Ojibwe people harvest maple sugar and wild rice. The first booklet explains the procedure of tapping the maple trees for sap, preparation for boiling the sap, and the three forms the sugar is made into (granulated, "molded," and…

Autotransplantation donor tooth site harvesting using piezosurgery.

Science.gov (United States)

Ylikontiola, Leena P; Sándor, George K

2016-01-01

The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

Ultrasound acoustic wave energy transfer and harvesting

Science.gov (United States)

Shahab, Shima; Leadenham, Stephen; Guillot, François; Sabra, Karim; Erturk, Alper

2014-04-01

This paper investigates low-power electricity generation from ultrasound acoustic wave energy transfer combined with piezoelectric energy harvesting for wireless applications ranging from medical implants to naval sensor systems. The focus is placed on an underwater system that consists of a pulsating source for spherical wave generation and a harvester connected to an external resistive load for quantifying the electrical power output. An analytical electro-acoustic model is developed to relate the source strength to the electrical power output of the harvester located at a specific distance from the source. The model couples the energy harvester dynamics (piezoelectric device and electrical load) with the source strength through the acoustic-structure interaction at the harvester-fluid interface. Case studies are given for a detailed understanding of the coupled system dynamics under various conditions. Specifically the relationship between the electrical power output and system parameters, such as the distance of the harvester from the source, dimensions of the harvester, level of source strength, and electrical load resistance are explored. Sensitivity of the electrical power output to the excitation frequency in the neighborhood of the harvester's underwater resonance frequency is also reported.

Dust emissions eliminated in pneumatic harvesting

International Nuclear Information System (INIS)

Kallio, M.

1998-01-01

Pneumatic harvesting is the most efficient milled peat production method in unsteady weather conditions. In good summers, the best contractors harvest more than 1 000 m 3 /ha milled peat from suitable production fields. The greatest problem of the method is caused by dust emissions, in particular in fields close to settled areas. About 15 % of Finland's present peat production is collected using pneumatic harvesters. A pneumatic harvester with smaller dust emissions has been developed by VTT Energy and Vapo Oy. The wagon is based on two-stage separation of peat. The main part of the coarser milled peat is first separated, e.g. in a settling chamber, and fine dry peat dust in correctly dimensioned side by side cyclones. The first series of pneumatic harvesters based on the new separation technology was employed in summer 1996. Besides decreasing the dust emissions the harvesting capacity of the new equipment was increased. The collection capacity of the pneumatic harvester can be made more effective by enlarging the container size, be decreasing the weight, by increasing the driving speed and by developing the suction capacity. Using lighter and durable construction materials combined with advanced design lighter and stronger pneumatic harvesters have been constructed. Nozzles and their mounting have also been developed. In the improvement of nozzles, the former studies with pneumatic simulator of VTT Energy, have been of great help. Studies with the pneumatic simulator and field conditions have been made in collaboration with Turveruukki Oy, Turvemetalli Oy, Raussin Metalli Oy and Vapo Oy, as well as VNIITP of St. Petersburg, Russia

Dielectric loss against piezoelectric power harvesting

Science.gov (United States)

Liang, Junrui; Shu-Hung Chung, Henry; Liao, Wei-Hsin

2014-09-01

Piezoelectricity is one of the most popular electromechanical transduction mechanisms for constructing kinetic energy harvesting systems. When a standard energy harvesting (SEH) interface circuit, i.e., bridge rectifier plus filter capacitor, is utilized for collecting piezoelectric power, the previous literature showed that the power conversion can be well predicted without much consideration for the effect of dielectric loss. Yet, as the conversion power gets higher by adopting power-boosting interface circuits, such as synchronized switch harvesting on inductor (SSHI), the neglect of dielectric loss might give rise to deviation in harvested power estimation. Given the continuous progress on power-boosting interface circuits, the role of dielectric loss in practical piezoelectric energy harvesting (PEH) systems should receive attention with better evaluation. Based on the integrated equivalent impedance network model, this fast track communication provides a comprehensive study on the susceptibility of harvested power in PEH systems under different conditions. It shows that, dielectric loss always counteracts piezoelectric power harvesting by causing charge leakage across piezoelectric capacitance. In particular, taking corresponding ideal lossless cases as references, the counteractive effect might be aggravated under one of the five conditions: larger dielectric loss tangent, lower vibration frequency, further away from resonance, weaker electromechanical coupling, or using power-boosting interface circuit. These relationships are valuable for the study of PEH systems, as they not only help explain the role of dielectric loss in piezoelectric power harvesting, but also add complementary insights for material, structure, excitation, and circuit considerations towards holistic evaluation and design for practical PEH systems.

Dielectric loss against piezoelectric power harvesting

International Nuclear Information System (INIS)

Liang, Junrui; Shu-Hung Chung, Henry; Liao, Wei-Hsin

2014-01-01

Piezoelectricity is one of the most popular electromechanical transduction mechanisms for constructing kinetic energy harvesting systems. When a standard energy harvesting (SEH) interface circuit, i.e., bridge rectifier plus filter capacitor, is utilized for collecting piezoelectric power, the previous literature showed that the power conversion can be well predicted without much consideration for the effect of dielectric loss. Yet, as the conversion power gets higher by adopting power-boosting interface circuits, such as synchronized switch harvesting on inductor (SSHI), the neglect of dielectric loss might give rise to deviation in harvested power estimation. Given the continuous progress on power-boosting interface circuits, the role of dielectric loss in practical piezoelectric energy harvesting (PEH) systems should receive attention with better evaluation. Based on the integrated equivalent impedance network model, this fast track communication provides a comprehensive study on the susceptibility of harvested power in PEH systems under different conditions. It shows that, dielectric loss always counteracts piezoelectric power harvesting by causing charge leakage across piezoelectric capacitance. In particular, taking corresponding ideal lossless cases as references, the counteractive effect might be aggravated under one of the five conditions: larger dielectric loss tangent, lower vibration frequency, further away from resonance, weaker electromechanical coupling, or using power-boosting interface circuit. These relationships are valuable for the study of PEH systems, as they not only help explain the role of dielectric loss in piezoelectric power harvesting, but also add complementary insights for material, structure, excitation, and circuit considerations towards holistic evaluation and design for practical PEH systems. (fast track communications)

The effects of harvest on waterfowl populations

Science.gov (United States)

Cooch, Evan G.; Guillemain, Matthieu; Boomer, G Scott; Lebreton, Jean-Dominique; Nichols, James D.

2014-01-01

Change in the size of populations over space and time is, arguably, the motivation for much of pure and applied ecological research. The fundamental model for the dynamics of any population is straightforward: the net change in the abundance is the simple difference between the number of individuals entering the population and the number leaving the population, either or both of which may change in response to factors intrinsic and extrinsic to the population. While harvest of individuals from a population constitutes a clear extrinsic source of removal of individuals, the response of populations to harvest is frequently complex, reflecting an interaction of harvest with one or more population processes. Here we consider the role of these interactions, and factors influencing them, on the effective harvest management of waterfowl populations. We review historical ideas concerning harvest and discuss the relationship(s) between waterfowl life histories and the development and application of population models to inform harvest management. The influence of population structure (age, spatial) on derivation of optimal harvest strategies (with and without explicit consideration of various sources of uncertainty) is considered. In addition to population structure, we discuss how the optimal harvest strategy may be influenced by: 1) patterns of density-dependence in one or more vital rates, and 2) heterogeneity in vital rates among individuals within an age-sex-size class. Although derivation of the optimal harvest strategy for simple population models (with or without structure) is generally straightforward, there are several potential difficulties in application. In particular, uncertainty concerning the population structure at the time of harvest, and the ability to regulate the structure of the harvest itself, are significant complications. We therefore review the evidence of effects of harvest on waterfowl populations. Some of this evidence has

Energy harvesting with Di-Electro Active Polymers

DEFF Research Database (Denmark)

Due, Jens; Munk-Nielsen, Stig; Nielsen, Rasmus Ørndrup

2010-01-01

This article presents a way of using Di-Electro Active Polymers (D-EAPs) for harvesting mechanical energy sources. The article describes the basics of energy harvesting with D-EAPs, and an electrical model of a D-EAP is suggested. This leads to a converter design which is able to extract...... the electrical energy harvested by the D-EAP. This converter is simulated and realized. Through experimental results both the model of the DEAP and the converter are verified. It is found that it is possible to harvest energy with a D-EAP and build a converter that can extract the harvested energy....

Chemical composition and methane yield of reed canary grass as influenced by harvesting time and harvest frequency.

Science.gov (United States)

Kandel, Tanka P; Sutaryo, Sutaryo; Møller, Henrik B; Jørgensen, Uffe; Lærke, Poul E

2013-02-01

This study examined the influence of harvest time on biomass yield, dry matter partitioning, biochemical composition and biological methane potential of reed canary grass harvested twice a month in one-cut (OC) management. The regrowth of biomass harvested in summer was also harvested in autumn as a two-cut management with (TC-F) or without (TC-U) fertilization after summer harvest. The specific methane yields decreased significantly with crop maturity that ranged from 384 to 315 and from 412 to 283 NL (normal litre) (kgVS)(-1) for leaf and stem, respectively. Approximately 45% more methane was produced by the TC-F management (5430Nm(3)ha(-1)) as by the OC management (3735Nm(3)ha(-1)). Specific methane yield was moderately correlated with the concentrations of fibre components in the biomass. Larger quantity of biogas produced at the beginning of the biogas assay from early harvested biomass was to some extent off-set by lower concentration of methane. Copyright © 2012 Elsevier Ltd. All rights reserved.

Bundling harvester; Harvennuspuun automaattisen nippukorjausharvesterin kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Koponen, K [Eko-Log Oy, Kuopio (Finland)

1997-12-01

The starting point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automating of the harvester, and automated loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilisation of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilised without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilisation of wood-energy. (orig.)

Electromagnetic energy harvester for harvesting acoustic energy

Indian Academy of Sciences (India)

Farid U Khan

Acoustics; energy harvesting; electromagnetic; Helmholtz resonator; sound pressure level; suspended coil. ... WSNs, which are supposed to operate for longer period of time. However ... several ambient energies such as wind, thermal, vibration, and solar are ..... textile plants in Northern India with specific reference to noise.

Action of sulfurous acid on pollen. [Hepatica triloba; Helleborus orientalis; Vinca minor; Viola tricolor; Primula officinalis; Lilium candidum; Petunia; Pisum; Helleborus viridus; Galanthus nivealis; Vinca major; Convallaria maialis; Narcissus poeticus; Caltha palustris; Cystisus laburnum; Orchis maculata; Bilbergia; Eranthus; Crocus

Energy Technology Data Exchange (ETDEWEB)

Sabachnikoff, V

1912-01-23

The following ornamental plants: Hepatica triloba, Helleborus orientalis, Vinca minor, Viola tricolor, Primula officinalis, Lilium candidum, Petunia, Pisum, Helleborus viridus, Galanthus nivealis, Vinca major, Convallaria maialis, Narcissus poeticus, Caltha palustris, Cystisus laburnum, Orchis maculata, Bilbergia, Eranthus, and Crocus were tested for seed production. Exposure to sulfuric acid ranged from three to forty-eight hours. Responses were noted for varying concentrations.

Energy harvesting for self-powered aerostructure actuation

Science.gov (United States)

Bryant, Matthew; Pizzonia, Matthew; Mehallow, Michael; Garcia, Ephrahim

2014-04-01

This paper proposes and experimentally investigates applying piezoelectric energy harvesting devices driven by flow induced vibrations to create self-powered actuation of aerostructure surfaces such as tabs, flaps, spoilers, or morphing devices. Recently, we have investigated flow-induced vibrations and limit cycle oscillations due to aeroelastic flutter phenomena in piezoelectric structures as a mechanism to harvest energy from an ambient fluid flow. We will describe how our experimental investigations in a wind tunnel have demonstrated that this harvested energy can be stored and used on-demand to actuate a control surface such as a trailing edge flap in the airflow. This actuated control surface could take the form of a separate and discrete actuated flap, or could constitute rotating or deflecting the oscillating energy harvester itself to produce a non-zero mean angle of attack. Such a rotation of the energy harvester and the associated change in aerodynamic force is shown to influence the operating wind speed range of the device, its limit cycle oscillation (LCO) amplitude, and its harvested power output; hence creating a coupling between the device's performance as an energy harvester and as a control surface. Finally, the induced changes in the lift, pitching moment, and drag acting on a wing model are quantified and compared for a control surface equipped with an oscillating energy harvester and a traditional, static control surface of the same geometry. The results show that when operated in small amplitude LCO the energy harvester adds negligible aerodynamic drag.

Piezoelectric energy harvesting with parametric uncertainty

International Nuclear Information System (INIS)

Ali, S F; Friswell, M I; Adhikari, S

2010-01-01

The design and analysis of energy harvesting devices is becoming increasing important in recent years. Most of the literature has focused on the deterministic analysis of these systems and the problem of uncertain parameters has received less attention. Energy harvesting devices exhibit parametric uncertainty due to errors in measurement, errors in modelling and variability in the parameters during manufacture. This paper investigates the effect of parametric uncertainty in the mechanical system on the harvested power, and derives approximate explicit formulae for the optimal electrical parameters that maximize the mean harvested power. The maximum of the mean harvested power decreases with increasing uncertainty, and the optimal frequency at which the maximum mean power occurs shifts. The effect of the parameter variance on the optimal electrical time constant and optimal coupling coefficient are reported. Monte Carlo based simulation results are used to further analyse the system under parametric uncertainty

Waste energy harvesting mechanical and thermal energies

CERN Document Server

Ling Bing, Kong; Hng, Huey Hoon; Boey, Freddy; Zhang, Tianshu

2014-01-01

Waste Energy Harvesting overviews the latest progress in waste energy harvesting technologies, with specific focusing on waste thermal mechanical energies. Thermal energy harvesting technologies include thermoelectric effect, storage through phase change materials and pyroelectric effect. Waste mechanical energy harvesting technologies include piezoelectric (ferroelectric) effect with ferroelectric materials and nanogenerators. The book aims to strengthen the syllabus in energy, materials and physics and is well suitable for students and professionals in the fields.

Magnetic Nanocomposite Cilia Energy Harvester

KAUST Repository

Khan, Mohammed Asadullah

2016-02-11

An energy harvester capable of converting low frequency vibrations into electrical energy is presented. The operating principle, fabrication process and output characteristics at different frequencies are discussed. The harvester is realized by fabricating an array of polydimethylsiloxane (PDMS) - iron nanowire nanocomposite cilia on a planar coil array. Each coil element consists of 14 turns and occupies an area of 600 μm x 600μm. The cilia are arranged in a 12x5 array and each cilium is 250 μm wide and 2 mm long. The magnetic characteristics of the fabricated cilia indicate that the nanowires are well aligned inside of the nanocomposite, increasing the efficiency of energy harvesting. The energy harvester occupies an area of 66.96 mm2 and produces an output r.m.s voltage of 206.47μV, when excited by a 40 Hz vibration of 1 mm amplitude.

Removal of Chloramphenicol from Aqueous Solution Using Low-Cost Activated Carbon Prepared from Typha orientalis

Directory of Open Access Journals (Sweden)

Yiran Li

2018-03-01

Full Text Available Low-cost and efficient activated carbon (AC was prepared from Typha orientalis via phosphoric acid activation for chloramphenicol (CAP removal. The adsorption capacity and mechanisms of CAP on AC were investigated. The physicochemical properties of AC were characterized by an N2 adsorption/desorption isotherm, elemental analysis, Boehm’s titration and X-ray photoelectron spectroscopy (XPS. The effects of experimental parameters were investigated to study the adsorption behaviors of CAP on AC, including contact time, initial concentration, ionic strength, and initial pH. AC had a micro-mesoporous structure with a relatively large surface area (794.8 m2/g. The respective contents of acidic and basic functional groups on AC were 2.078 and 0.995 mmol/g. The adsorption kinetic that was well described by a pseudo-second-order rate model implied a chemical controlling step. The adsorption isotherm was well fitted with the Freundlich isotherm model, and the maximum CAP adsorption capacity was 0.424 mmol/g. The ionic strength and pH had minimal effects on CAP adsorption. The dominant CAP adsorption mechanisms on AC were evaluated and attributed to π-π electron-donor-acceptor (EDA interaction, hydrophobic interaction, in conjunction with hydrogen-bonding interaction. Additionally, AC exhibited an efficient adsorption performance of CAP in a realistic water environment.

Characterization of Piezoelectric Energy Harvesting MEMS

Science.gov (United States)

2015-12-01

of previously fabricated MEMS piezoelectric energy harvesters and use the results to optimize an advanced finite element model to be used in...possibilities of using solar power and the piezoelectric effect to harvest energy [12]. The design goal was to develop an energy harvester with a resonant... The piezoelectric properties of AlN are also relatively constant over a wide range of temperatures [7]. AlN was further characterized

Power harvesting in helicopter rotorblades

NARCIS (Netherlands)

de Jong, Pieter; de Boer, Andries; Loendersloot, Richard; van der Hoogt, Peter

2010-01-01

Current power harvesting research has focused on bending beams and determining power output under a given excitation. For the European CleanSky – Green Rotor Craft project a tool is being developed which optimizes the piezoelectric material and placement thereof for power harvesting. It focuses on

Risk factors of musculoskeletal disorders among oil palm fruit harvesters during early harvesting stage

Directory of Open Access Journals (Sweden)

Yee Guan Ng

2015-05-01

Full Text Available This cross-sectional study intends to investigate the associations of musculoskeletal disorders (MSDs among foreign labourers on a socio-economic background, occupational exposure, social lifestyle, and postures adopted during harvesting tasks. A total of 446 male respondents (263 FFB cutters; 183 FFB collectors were studied using an interview-assisted questionnaire. OWAS was used to determine the severity of awkward posture based on videos of harvesting tasks recorded for each respondent. Analysis found that increasingly educated respondents had higher risk of developing MSDs. Shorter daily work duration and longer resting duration appear to increase the risk of neck and shoulder disorders among harvesters, which may be attributable to organizational work design. Awkward posture was a particularly significant risk factor of MSDs among FFB collectors. Among the results of the study, occupational exposure, postures and certain socio-demographic backgrounds explained some, but not all, the risk factor of MSDs among harvesters. An in-depth investigation, preferably a longitudinal study investigating the dynamic of work activities and other risk factors, such as psychosocial risk factors, are recommended.

Remaining questions in the case for balanced harvesting

DEFF Research Database (Denmark)

Burgess, Matthew G; Diekert, Florian K; Jacobsen, Nis Sand

2016-01-01

are controversial, including its call for extensive harvesting of juveniles and forage fish. Balanced harvesting also calls for targeting species and size-classes that are not currently marketable, possibly at a significant economic cost. Some have argued that this cost is outweighed by the ecological benefits......Balanced harvesting – harvesting all species and sizes in an ecosystem in proportion to their productivity – is a fisheries management strategy that has been suggested recently to increase yields, while reducing overall ecosystem impact. However, some aspects of balanced harvesting...

Smart multi-application energy harvester using Arduino | Rizman ...

African Journals Online (AJOL)

This paper presents a Smart Multi-App Harvester Energy Using Arduino for energy harvesting. The system consists of a few mechanical parts such as solar, thermal plate and dynamo (for kinetic) to harvest the energy. The objectives of the project are to harvest the wasted energy from the mechanical parts and used it as a ...

Do biomass harvesting guidelines influence herpetofauna following harvests of logging residues for renewable energy?.

Science.gov (United States)

Fritts, Sarah; Moorman, Christopher; Grodsky, Steven; Hazel, Dennis; Homyack, Jessica; Farrell, Chris; Castleberry, Steven

2016-04-01

Forests are a major supplier of renewable energy; however, gleaning logging residues for use as woody biomass feedstock could negatively alter habitat for species dependent on downed wood. Biomass Harvesting Guidelines (BHGs) recommend retaining a portion of woody biomass on the forest floor following harvest. Despite BHGs being developed to help ensure ecological sustainability, their contribution to biodiversity has not been evaluated experimentally at operational scales. We compared herpetofauanal evenness, diversity, and richness and abundance of Anaxyrus terrestris and Gastrophryne carolinensis among six treatments that varied in volume and spatial arrangement of woody biomass retained after clearcutting loblolly pine (Pinus taeda) plantations in North Carolina, USA (n = 4), 2011-2014 and Georgia (n = 4), USA 2011-2013. Treatments were: (1) biomass harvest with no BHGs, (2) 15% retention with biomass clustered, (3) 15% retention with biomass dispersed, (4) 30% retention with biomass clustered, (5) 30% retention with biomass dispersed, and (6) no biomass harvest. We captured individuals with drift fence arrays and compared evenness, diversity, and richness metrics among treatments with repeated-measure, linear mixed-effects models. We determined predictors of A. terrestris and G. carolinensis abundances using a priori candidate N-mixture models with woody biomass volume, vegetation structure, and groundcover composition as covariates. We had 206 captures of 25 reptile species and 8710 captures of 17 amphibian species during 53690 trap nights. Herpetofauna diversity, evenness, and richness were similar among treatments. A. terrestris abundance was negatively related to volume of retained woody biomass in treatment units in North Carolina in 2013. G. carolinensis abundance was positively related with volume of retained woody debris in treatment units in Georgia in 2012. Other relationships between A. terrestris and G. carolinensis abundances and habitat metrics

Water harvest via dewing.

Science.gov (United States)

Lee, Anna; Moon, Myoung-Woon; Lim, Hyuneui; Kim, Wan-Doo; Kim, Ho-Young

2012-07-10

Harvesting water from humid air via dewing can provide a viable solution to a water shortage problem where liquid-phase water is not available. Here we experimentally quantify the effects of wettability and geometry of the condensation substrate on the water harvest efficiency. Uniformly hydrophilic surfaces are found to exhibit higher rates of water condensation and collection than surfaces with lower wettability. This is in contrast to a fog basking method where the most efficient surface consists of hydrophilic islands surrounded by hydrophobic background. A thin drainage path in the lower portion of the condensation substrate is revealed to greatly enhance the water collection efficiency. The optimal surface conditions found in this work can be used to design a practical device that harvests water as its biological counterpart, a green tree frog, Litoria caerulea , does during the dry season in tropical northern Australia.

Harvesting systems for the northern forest hardwoods

Science.gov (United States)

Chris B. LeDoux

2011-01-01

This monograph is a summary of research results and environmental compliance measures for timber harvesting operations. Data are presented from the Northern Research Station's forest inventory and analysis of 20 states in the northern forest hardwoods. Harvesting systems available in the region today are summarized. Equations for estimating harvesting costs are...

High-efficiency integrated piezoelectric energy harvesting systems

Science.gov (United States)

Hande, Abhiman; Shah, Pradeep

2010-04-01

This paper describes hierarchically architectured development of an energy harvesting (EH) system that consists of micro and/or macro-scale harvesters matched to multiple components of remote wireless sensor and communication nodes. The micro-scale harvesters consist of thin-film MEMS piezoelectric cantilever arrays and power generation modules in IC-like form to allow efficient EH from vibrations. The design uses new high conversion efficiency thin-film processes combined with novel cantilever structures tuned to multiple resonant frequencies as broadband arrays. The macro-scale harvesters are used to power the collector nodes that have higher power specifications. These bulk harvesters can be integrated with efficient adaptive power management circuits that match transducer impedance and maximize power harvested from multiple scavenging sources with very low intrinsic power consumption. Texas MicroPower, Inc. is developing process based on a composition that has the highest reported energy density as compared to other commercially available bulk PZT-based sensor/actuator ceramic materials and extending it to thin-film materials and miniature conversion transducer structures. The multiform factor harvesters can be deployed for several military and commercial applications such as underground unattended sensors, sensors in oil rigs, structural health monitoring, supply chain management, and battlefield applications such as sensors on soldier apparel, equipment, and wearable electronics.

Optical Sensing of Weed Infestations at Harvest.

Science.gov (United States)

Barroso, Judit; McCallum, John; Long, Dan

2017-10-19

Kochia ( Kochia scoparia L.), Russian thistle ( Salsola tragus L.), and prickly lettuce ( Lactuca serriola L.) are economically important weeds infesting dryland wheat ( Triticum aestivum L.) production systems in the western United States. Those weeds produce most of their seeds post-harvest. The objectives of this study were to determine the ability of an optical sensor, installed for on-the-go measurement of grain protein concentration, to detect the presence of green plant matter in flowing grain and assess the potential usefulness of this information for mapping weeds at harvest. Spectra of the grain stream were recorded continuously at a rate of 0.33 Hz during harvest of two spring wheat fields of 1.9 and 5.4 ha. All readings were georeferenced using a Global Positioning System (GPS) receiver with 1 m positional accuracy. Chlorophyll of green plant matter was detectable in the red (638-710 nm) waveband. Maps of the chlorophyll signal from both fields showed an overall agreement of 78.1% with reference maps, one constructed prior to harvest and the other at harvest time, both based on visual evaluations of the three green weed species conducted by experts. Information on weed distributions at harvest may be useful for controlling post-harvest using variable rate technology for herbicide applications.

Improving Vibration Energy Harvesting Using Dynamic Magnifier

Directory of Open Access Journals (Sweden)

Almuatasim Alomari

2016-01-01

Full Text Available This paper reports on the design and evaluation of vibration-based piezoelectric energy-harvesting devices based on a polyvinylidene fluoride unimorph cantilever beam attached to the front of a dynamic magnifier. Experimental studies of the electromechanical frequency response functions are studied for the first three resonance frequencies. An analytical analysis is undertaken by applying the chain matrix in order to predict output voltage and output power with respect to the vibration frequency. The proposed harvester was modeled using MATLAB software and COMSOL multi- physics to study the mode shapes and electrical output parameters. The voltage and power output of the energy harvester with a dynamic magnifier was 2.62 V and 13.68 mW, respectively at the resonance frequency of the second mode. The modeling approach provides a basis to design energy harvesters exploiting dynamic magnification for improved performance and bandwidth. The potential application of such energy harvesting devices in the transport sector include autonomous structural health monitoring systems that often include embedded sensors, data acquisition, wireless communication, and energy harvesting systems.

Expansion of the known distribution of Asiatic mouflon (Ovis orientalis) in the Late Pleistocene of the Southern Levant

Science.gov (United States)

Yeomans, Lisa; Martin, Louise; Richter, Tobias

2017-08-01

Wild sheep (Ovis orientalis) bones recovered from the Natufian site of Shubayqa 1 demonstrate a wider distribution of mouflon in the Late Pleistocene of the Southern Levant than previously known. Early Epipalaeolithic sites are common in the limestone steppe region of eastern Jordan but have yielded only a handful of caprine bones that cannot be identified to species level and few faunal remains from excavated Late Epipalaeolithic sites have been reported. Analysis of animal bone from Shubayqa 1 suggests a significant population of wild sheep could be found concentrated in the basalt desert environment of eastern Jordan during the Late Pleistocene, especially where higher rainfall over the Jebel Druze provided more water. A population of wild sheep was still present in the Pre-Pottery Neolithic A when the nearby site of Shubayqa 6 was occupied. Hunting of diverse, locally available resources including wild sheep at the end of the Pleistocene illustrates the flexible and adaptive exploitation strategies that hunter-forager groups engaged in. This provides further evidence to the increasing body of data showing the creative and opportunistic approach of terminal Pleistocene groups allowing continued occupation even in more marginal environments in a period of environmental change.

Activities of some enzymes of lignin formation in reaction wood of Thuja orientalis, Metasequoia glyptostroboides and Robinia pseudoacacia.

Science.gov (United States)

Kutsuki, H; Higuchi, T

1981-07-01

The activities of the following five enzymes which are involved in the formation of lignin have been compared in reaction wood and in opposite wood: phenylalanine ammonia lyase (EC 4.3.1.5), caffeate 3-O-methyltransferase (EC 2.1.1.-), p-hydroxycinnamate: CoA ligase (EC 6.2.1.12), cinnamyl alcohol dehydrogenase (EC 1.1.1.-) and peroxidase (EC 1.11.1.7). The activities of the four first-named enzymes in the compression wood of Thuja orientalis L. and Metasequoia glyptostroboides Hu et Cheng were 2.8±1.4-fold and 2.6±1.5-fold higher than those in opposite wood, respectively, whereas peroxidase had the same level of activity in either type of wood. On the other hand, no differences were observed in the activities of the five enzymes between tension and opposite woods of Robinia pseudoacacia L. These findings are well in accord with the chemical structure of lignin in the compression and tension woods of the three species studied: high content of lignin rich in condensed units in compression wood, and little difference in lignin between tension and opposite woods.

The Effect of Plant Cultivar, Growth Media, Harvest Method and Post Harvest Treatment on the Microbiology of Edible Crops

Science.gov (United States)

Hummerick, Mary P.; Gates, Justin R.; Nguyen, Bao-Thang; Massa, Gioia D.; Wheeler, Raymond M.

2011-01-01

Systems for the growth of crops in closed environments are being developed and tested for potential use in space applications to provide a source of fresh food. Plant growth conditions, growth media composition and harvest methods can have an effect on the microbial population of the plant, and therefore should be considered along with the optimization of plant growth and harvest yields to ensure a safe and palatable food crop. This work examines the effect of plant cultivar, growth media, and harvest method on plant microbial populations. Twelve varieties of leafy greens and herbs were grown on a mixture of Fafard #2 and Arcillite in the pillow root containment system currently being considered for the VEGGIE plant growth unit developed by Orbitec. In addition, ,Sierra and Outredgeous lettuce varieties were grown in three different mixtures (Fafard #2, Ardllite, and Perlite/Vermiculite). The plants were analyzed for microbial density. Two harvest methods, "cut and come again" (CACA) and terminal harvest were also compared. In one set ofexpe'riments red leaf lettuce and mizuna were grown in pots in a Biomass Production System for education. Plants were harvested every two weeks by either method. Another set of experiments was performed using the rooting pillows to grow 5 varieties of leafy greens and cut harvesting at different intervals. Radishes were harvested and replanted at two-week intervals. Results indicate up to a 3 IOglO difference in microbial counts between some varieties of plants. Rooting medium resulted in an approximately 2 IOglO lower count in the lettuce grown in arscillite then those grown in the other mixtures. Harvest method and frequency had less impact on microbial counts only showing a significant increase in one variety of plant. Post harvest methods to decrease the bacterial counts on edible crops were investigated in these and other experiments. The effectiveness of PRO-SAN and UV-C radiation is compared.

Electrodynamic energy harvester for electrical transformer's ...

Indian Academy of Sciences (India)

Electrical transformer; electrodynamic; energy harvester; self-powered ...... Kennedy S P and Gordner T 2013 Hot spot studies for sheet wound transformer wind- ... and Lambert F 2011 Powering low-cost utility sensors using energy harvesting.

Computer Vision for Timber Harvesting

DEFF Research Database (Denmark)

Dahl, Anders Lindbjerg

The goal of this thesis is to investigate computer vision methods for timber harvesting operations. The background for developing computer vision for timber harvesting is to document origin of timber and to collect qualitative and quantitative parameters concerning the timber for efficient harvest...... segments. The purpose of image segmentation is to make the basis for more advanced computer vision methods like object recognition and classification. Our second method concerns image classification and we present a method where we classify small timber samples to tree species based on Active Appearance...... to the development of the logTracker system the described methods have a general applicability making them useful for many other computer vision problems....

Desert water harvesting to benefit wildlife: a simple, cheap, and durable sub-surface water harvester for remote locations.

Science.gov (United States)

Rice, William E

2004-12-01

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150-250 mm (6"-10"), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30-90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, "over the counter" materials. The micro-catchment is made of a square-shaped, 20 mL. "PERMALON" polyethylene pond liner (approximately 22.9 m x 22.9 m = 523 m2) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.

Development of energy harvesting modules based on piezoceramics

Energy Technology Data Exchange (ETDEWEB)

Kulkarni, V.; Waechter, D.; Ben Mrad, R. [Toronto Univ., ON (Canada). Dept. of Mechanical and Industrial Engineering; El-Diraby, T. [Toronto Univ., ON (Canada). Dept. of Civil Engineering; Somayajula, N.; Nemana, S.; Prasad, E. [Sensor Technology Ltd., Collingwood, ON (Canada)

2009-07-01

Self-powered devices can overcome the current reliance and limitations of finite-supply batteries. They have potential in developing next-generation wireless electronics for a wide variety of applications such as health monitoring in civil infrastructure, micro-electro-mechanical system (MEMS) sensor arrays for automotive and aerospace applications, and sensor arrays for environmental control. These energy harvesting devices capture the ambient energy surrounding a system and convert it into usable electrical energy. A common method of power harvesting is to convert ambient mechanical vibrations into electricity through the use of piezoelectric materials such as piezoceramics (PZT). This paper highlighted some of the recent developments in piezoceramic energy harvesting along with proposed circuits that can improve the performance of energy harvesters. The successful storage and use of energy generated by various harvesting devices requires the use of specific circuitry to optimize the output from the devices. Energy harvesting circuitry was characterized in terms of energy storage; AC/DC converter; DC-DC step down converter; and non-linear voltage processing. The patent activity and applications on piezoceramic energy harvesting was also summarized. It was concluded that despite significant research, piezoceramic energy harvesting remains an emerging technology that requires considerable advancement before it can be commercially viable. The power generated by current piezoelectric harvesters is too low for many applications. Alternative piezoceramic materials and their characteristics must be investigated. 31 refs., 1 tab., 4 figs.

CRITICAL INDICATORS IN MECHANIZED HARVEST GRAINS AND FIBER

Directory of Open Access Journals (Sweden)

E. Boeing

2017-10-01

Full Text Available Due to the growth in grain production and intensification of production systems losses are inevitable. The harvest as the last operation performed in the field requires better attention. Although the origins are varied and losses occur both before and during harvesting, approximately 80% of them occur by mechanisms of action of the harvester cutting platform. It is necessary to know the causes of losses, whether physical or physiological operational. Thus, the objective was to conduct a survey of potential losses and / or environmental factors that affect machinery and effectively and should be prioritized in a management program in order to raise the efficiency of harvesting. From the collected data determined if the potential of critical failures through the method of analysis and failure mode effects, using a questionnaire listed with the selected quality indicators. It was concluded that in the mechanical harvesting of cotton harvested product loss and impurity had insusceptible rates be prioritized goals in the management of the production process. While the grain crop (soybean / corn moisture grain and grain breaks are still the main causes in the loss of quality of the product, stressing the importance of harvesters in improving the characteristics at harvest in order to minimize qualitative grain losses.

Combined Euler column vibration isolation and energy harvesting

Science.gov (United States)

Davis, R. B.; McDowell, M. D.

2017-05-01

A new device that combines vibration isolation and energy harvesting is modeled, simulated, and tested. The vibration isolating portion of the device uses post-buckled beams as its spring elements. Piezoelectric film is applied to the beams to harvest energy from their dynamic flexure. The entire device operates passively on applied base excitation and requires no external power or control system. The structural system is modeled using the elastica, and the structural response is applied as forcing on the electric circuit equation to predict the output voltage and the corresponding harvested power. The vibration isolation and energy harvesting performance is simulated across a large parameter space and the modeling approach is validated with experimental results. Experimental transmissibilities of 2% and harvested power levels of 0.36 μW are simultaneously demonstrated. Both theoretical and experimental data suggest that there is not necessarily a trade-off between vibration isolation and harvested power. That is, within the practical operational range of the device, improved vibration isolation will be accompanied by an increase in the harvested power as the forcing frequency is increased.

Genotype and Phenotype of Echinococcus granulosus Derived from Wild Sheep (Ovis orientalis) in Iran.

Science.gov (United States)

Eslami, Ali; Meshgi, Behnam; Jalousian, Fatemeh; Rahmani, Shima; Salari, Mohammad Ali

2016-02-01

The aim of the present study is to determine the characteristics of genotype and phenotype of Echinococcus granulosus derived from wild sheep and to compare them with the strains of E. granulosus sensu stricto (sheep-dog) and E. granulosus camel strain (camel-dog) in Iran. In Khojir National Park, near Tehran, Iran, a fertile hydatid cyst was recently found in the liver of a dead wild sheep (Ovis orientalis). The number of protoscolices (n=6,000) proved enough for an experimental infection in a dog. The characteristics of large and small hooks of metacestode were statistically determined as the sensu stricto strain but not the camel strain (P=0.5). To determine E. granulosus genotype, 20 adult worms of this type were collected from the infected dog. The second internal transcribed spacer (ITS2) of the nuclear ribosomal DNA (rDNA) and cytochrome c oxidase 1 subunit (COX1) of the mitochondrial DNA were amplified from individual adult worm by PCR. Subsequently, the PCR product was sequenced by Sanger method. The lengths of ITS2 and COX1 sequences were 378 and 857 bp, respectively, for all the sequenced samples. The amplified DNA sequences from both ribosomal and mitochondrial genes were highly similar (99% and 98%, respectively) to that of the ovine strain in the GenBank database. The results of the present study indicate that the morpho-molecular features and characteristics of E. granulosus in the Iranian wild sheep are the same as those of the sheep-dog E. granulosus sensu stricto strain.

Flexible Piezoelectric Energy Harvesting from Mouse Click Motions

Directory of Open Access Journals (Sweden)

Youngsu Cha

2016-07-01

Full Text Available In this paper, we study energy harvesting from the mouse click motions of a robot finger and a human index finger using a piezoelectric material. The feasibility of energy harvesting from mouse click motions is experimentally and theoretically assessed. The fingers wear a glove with a pocket for including the piezoelectric material. We model the energy harvesting system through the inverse kinematic framework of parallel joints in a finger and the electromechanical coupling equations of the piezoelectric material. The model is validated through energy harvesting experiments in the robot and human fingers with the systematically varying load resistance. We find that energy harvesting is maximized at the matched load resistance to the impedance of the piezoelectric material, and the harvested energy level is tens of nJ.

Refreshing Music: Fog Harvesting with Harps

Science.gov (United States)

Shi, Weiwei; Anderson, Mark; Kennedy, Brook; Boreyko, Jonathan

2017-11-01

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture fog, while fine meshes suffer from clogging issues. Here, we design a new type of fog harvester comprised of an array of vertical wires, which we call ``fog harps.'' To investigate the water collection efficiency, three fog harps were designed with different diameters (254 μm, 508 μm and 1.30 mm) but the same pitch-to-diameter ratio of 2. For comparison, three different size meshes were purchased with equivalent dimensions. As expected for the mesh structures, the mid-sized wires performed the best, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog harvesting rate continually increased with decreasing wire diameter for the fog harps, due to its low hysteresis that prevented droplet clogging. This resulted in a 3-fold enhancement in the fog harvesting rate for the harp form factor compared to the mesh. The lack of a performance ceiling for the harps suggest that even greater enhancements could be achieved by scaling down to yet smaller sizes.

36 CFR 223.219 - Sustainable harvest of special forest products.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Sustainable harvest of....219 Sustainable harvest of special forest products. (a) Sustainable harvest levels. Prior to offering... product's sustainable harvest level. A special forest product's sustainable harvest level is the total...

Small-Sized Whole-Tree Harvesting in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle [Metsaeteho Oy, Helsinki (Finland)

2006-07-15

In Finland, there are two mechanized harvesting systems used for small diameter (d{sub 1.3}= 10 cm) thinning wood: 1) the traditional two-machine (harvester and forwarder) system, and 2) the harwarder system (i.e. the same machine performs both felling and haulage to the roadside). At present, there are more than 20 energy wood harwarders in use in Finland. However, there have been no comprehensive studies carried out on the energy wood harwarders. This paper looks into the productivity results obtained with energy wood harwarders. In addition, the energy wood harvesting costs for harwarders are compared with those of the two-machine system. The results clearly indicated what kind of machine resources can be profitably allocated to different whole-tree harvesting sites. The energy wood harwarders should be directed towards harvesting sites where the forwarding distances are small, the trees harvested are relatively small, and the total volume of energy wood removed is quite low. Respectively, when the stem size removed is relatively large in young stands, and the forest haulage distances are long, the traditional two-machine system is more competitive.

Tropical forest harvesting and taxation: a dynamic model of harvesting behavior under selective extraction systems

Science.gov (United States)

Robert F. Conrad; Malcolm Gillis; D. Evan Mercer

2005-01-01

A dynamic model of selective harvesting in multi-species,multi-age tropical forests is developed. Forests are predicted to exhibit different optimal harvesting profiles depending on the nature of their joint cost functions and own or cross-species stock effects. The model is applied to the controversy about incentives produced by various taxes. The impacts of specific...

Harvesting of microalgae by bio-flocculation

NARCIS (Netherlands)

Salim, S.; Bosma, R.; Vermuë, M.H.; Wijffels, R.H.

2011-01-01

The high-energy input for harvesting biomass makes current commercial microalgal biodiesel production economically unfeasible. A novel harvesting method is presented as a cost and energy efficient alternative: the bio-flocculation by using one flocculating microalga to concentrate the

Experimental measurement of energy harvesting with backpack

Science.gov (United States)

Pavelkova, Radka; Vala, David; Suranek, Pavel; Mahdal, Miroslav

2017-08-01

This article deals with the energy harvesting systems, especially the energy harvesting backpack, which appears as a convenient means for energy harvesting for mobile sensors power. Before starting the experiment, it was necessary to verify whether this energy will be sufficient to get acquainted with the human kinematics and analyze problematics itself. For this purpose there was used motion capture technology from Xsens. Measured data on the position of a particle moving man and back when walking, these data were then used for experimental realization of energy harvesting backpack and as input data to the simulation in Simulink, which brought us a comparison between theoretical assumptions and practical implementation. When measuring characteristics of energy harvesting system we have a problem with measurements on backpack solved when redoing of the hydraulic cylinder as a source of a suitable movement corresponding to the amplitude and frequency of human walk.

Apparatus and method for harvesting woody plantations

Science.gov (United States)

Eggen, D.L.

1988-11-15

A tree harvester for harvesting felled trees includes a wheel mounted wood chipper which moves toward the butt ends of the tree stems to be processed. The harvester includes a plurality of rotating alignment discs in front of the chipper. These discs align the tree stems to be processed with the mouth of the chipper. A chipper infeed cylinder is rotatably mounted between the discs and the front end of the chipper, and lifts the tree stem butts up from the ground into alignment with the chipper inlet port. The chips discharge from the chipper and go into a chip hopper which moves with the tree harvester. 8 figs.

Microelectronic circuit design for energy harvesting systems

CERN Document Server

Di Paolo Emilio, Maurizio

2017-01-01

This book describes the design of microelectronic circuits for energy harvesting, broadband energy conversion, new methods and technologies for energy conversion. The author also discusses the design of power management circuits and the implementation of voltage regulators. Coverage includes advanced methods in low and high power electronics, as well as principles of micro-scale design based on piezoelectric, electromagnetic and thermoelectric technologies with control and conditioning circuit design. Provides a single-source reference to energy harvesting and its applications; Serves as a practical guide to microelectronics design for energy harvesting, with application to mobile power supplies; Enables readers to develop energy harvesting systems for wearable/mobile electronics.

Pyroelectric Energy Harvesting: With Thermodynamic-Based Cycles

OpenAIRE

Saber Mohammadi; Akram Khodayari

2012-01-01

This work deals with energy harvesting from temperature variations using ferroelectric materials as a microgenerator. The previous researches show that direct pyroelectric energy harvesting is not effective, whereas thermodynamic-based cycles give higher energy. Also, at different temperatures some thermodynamic cycles exhibit different behaviours. In this paper pyroelectric energy harvesting using Lenoir and Ericsson thermodynamic cycles has been studied numerically and the two cycles were c...

75 FR 3888 - Migratory Bird Subsistence Harvest in Alaska; Harvest Regulations for Migratory Birds in Alaska...

Science.gov (United States)

2010-01-25

...-0082; 91200-1231-9BPP-L2] RIN 1018-AW67 Migratory Bird Subsistence Harvest in Alaska; Harvest Regulations for Migratory Birds in Alaska During the 2010 Season AGENCY: Fish and Wildlife Service, Interior... Service, are reopening the public comment period on our proposed rule to establish migratory bird...

Nano/microscale pyroelectric energy harvesting: challenges and opportunities

Directory of Open Access Journals (Sweden)

Devashish Lingam

2013-12-01

Full Text Available With the ever-growing demand for renewable energy sources, energy harvesting from natural resources has gained much attention. Energy sources such as heat and mechanical motion could be easily harvested based on pyroelectric, thermoelectric, and piezoelectric effects. The energy harvested from otherwise wasted energy in the environment can be utilized in self-powered micro and nano devices, and wearable electronics, which required only µW–mW power. This article reviews pyroelectric energy harvesting with an emphasis on recent developments in pyroelectric energy harvesting and devices at micro/nanoscale. Recent developments are presented and future challenges and opportunities for more efficient materials and devices with higher energy conversion efficiency are also discussed.

Fluid flow nozzle energy harvesters

Science.gov (United States)

Sherrit, Stewart; Lee, Hyeong Jae; Walkemeyer, Phillip; Winn, Tyler; Tosi, Luis Phillipe; Colonius, Tim

2015-04-01

Power generation schemes that could be used downhole in an oil well to produce about 1 Watt average power with long-life (decades) are actively being developed. A variety of proposed energy harvesting schemes could be used to extract energy from this environment but each of these has their own limitations that limit their practical use. Since vibrating piezoelectric structures are solid state and can be driven below their fatigue limit, harvesters based on these structures are capable of operating for very long lifetimes (decades); thereby, possibly overcoming a principle limitation of existing technology based on rotating turbo-machinery. An initial survey [1] identified that spline nozzle configurations can be used to excite a vibrating piezoelectric structure in such a way as to convert the abundant flow energy into useful amounts of electrical power. This paper presents current flow energy harvesting designs and experimental results of specific spline nozzle/ bimorph design configurations which have generated suitable power per nozzle at or above well production analogous flow rates. Theoretical models for non-dimensional analysis and constitutive electromechanical model are also presented in this paper to optimize the flow harvesting system.

OAI-PMH for resource harvesting, tutorial 2

CERN Multimedia

CERN. Geneva; Nelson, Michael

2005-01-01

A variety of examples have arisen in which the Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) has been used for applications beyond bibliographic metadata interchange. One of these examples is the use of OAI-PMH to harvest resources and not just metadata. Advanced resource discovery and preservations capabilities are possible by combining complex object formats such as MPEG-21 DIDL, METS and SCORM with the OAI-PMH. In this tutorial, we review community conventions and practices that have provided the impetus for resource harvesting. We show how the introduction of complex object formats for the representation of resources leads to a robust, OAI-PMH-based framework for resource harvesting. We detail how complex object formats fit in the OAI-PMH data model, and how (compound) digital objects can be represented using a complex object format for exposure by an OAI-PMH repository. We also cover tools that are available for the implementation of an OAI-PMH-based resource harvesting solution. Fu...

Piezoelectric energy harvesting from broadband random vibrations

International Nuclear Information System (INIS)

Adhikari, S; Friswell, M I; Inman, D J

2009-01-01

Energy harvesting for the purpose of powering low power electronic sensor systems has received explosive attention in the last few years. Most works using deterministic approaches focusing on using the piezoelectric effect to harvest ambient vibration energy have concentrated on cantilever beams at resonance using harmonic excitation. Here, using a stochastic approach, we focus on using a stack configuration and harvesting broadband vibration energy, a more practically available ambient source. It is assumed that the ambient base excitation is stationary Gaussian white noise, which has a constant power-spectral density across the frequency range considered. The mean power acquired from a piezoelectric vibration-based energy harvester subjected to random base excitation is derived using the theory of random vibrations. Two cases, namely the harvesting circuit with and without an inductor, have been considered. Exact closed-form expressions involving non-dimensional parameters of the electromechanical system have been given and illustrated using numerical examples

Piezoelectric energy harvesting from broadband random vibrations

Science.gov (United States)

Adhikari, S.; Friswell, M. I.; Inman, D. J.

2009-11-01

Energy harvesting for the purpose of powering low power electronic sensor systems has received explosive attention in the last few years. Most works using deterministic approaches focusing on using the piezoelectric effect to harvest ambient vibration energy have concentrated on cantilever beams at resonance using harmonic excitation. Here, using a stochastic approach, we focus on using a stack configuration and harvesting broadband vibration energy, a more practically available ambient source. It is assumed that the ambient base excitation is stationary Gaussian white noise, which has a constant power-spectral density across the frequency range considered. The mean power acquired from a piezoelectric vibration-based energy harvester subjected to random base excitation is derived using the theory of random vibrations. Two cases, namely the harvesting circuit with and without an inductor, have been considered. Exact closed-form expressions involving non-dimensional parameters of the electromechanical system have been given and illustrated using numerical examples.

A Miniature Coupled Bistable Vibration Energy Harvester

International Nuclear Information System (INIS)

Zhu, D; Arthur, D C; Beeby, S P

2014-01-01

This paper reports the design and test of a miniature coupled bistable vibration energy harvester. Operation of a bistable structure largely depends on vibration amplitude rather than frequency, which makes it very promising for wideband vibration energy harvesting applications. A coupled bistable structure consists of a pair of mobile magnets that create two potential wells and thus the bistable phenomenon. It requires lower excitation to trigger bistable operation compared to conventional bistable structures. Based on previous research, this work focused on miniaturisation of the coupled bistable structure for energy harvesting application. The proposed bistable energy harvester is a combination of a Duffing's nonlinear structure and a linear assisting resonator. Experimental results show that the output spectrum of the miniature coupled bistable vibration energy harvester was the superposition of several spectra. It had a higher maximum output power and a much greater bandwidth compared to simply the Duffing's structure without the assisting resonator

A Galloping Energy Harvester with Attached Flow

Science.gov (United States)

Denissenko, Petr; Khovanov, Igor; Tucker-Harvey, Sam

2017-11-01

Aeroelastic energy harvesters are a promising technology for the operation of wireless sensors and microelectromechanical systems, as well as providing the possibility of harvesting wind energy in applications were conventional wind turbines are ineffective, such as in highly turbulent flows, or unreliable, such as in harsh environmental conditions. The development of aeroelastic energy harvesters to date has focused on the flutter of airfoils, the galloping of prismatic structures, and the vortex induced vibrations. We present a novel type of galloping energy harvester with the flow becoming attached when the oscillation amplitude is high enough. With the flow attached, the harvester blade acts closer to an aerofoil than a bluff body, which results in a higher efficiency. The dynamics of a prototype device has been characterised experimentally with the use of a motion tracking system. The flow structure in the vicinity of the device has been studied using smoke visualisation and PIV measurements. A lumped parameter mathematical model has been developed and related to the experimental results.

PROTOCOL FOR HARVESTING ‘BRS PRINCESS’ BANANA FRUITS

Directory of Open Access Journals (Sweden)

LUIZ FERNANDO GANASSALI DE OLIVEIRA JUNIOR

Full Text Available ABSTRACT The aim of this study was to develop a protocol to determine the ideal harvest time for ‘BRS Princess’ banana, using the number of aborted bracts. The bananas were selected according to the number of aborted bracts since the flowering until the time of harvest, yield clusters with 90, 95, 100 and 105 aborted bracts. The physical and chemical analyzes were performed every 3 days on fruits: soluble solids, titratable acidity, weight loss, length and diameter, pH, firmness, skin color (CIELab and pectin enzyme activity. The statistical design was completely randomized in a 4x5 factorial, with 4 points and 5 periods of harvest analysis and data were evaluated using analysis of variance and regression. For all parameters, fruits harvested at 90 and 105 aborted bracts had unwanted changes in its metabolism when compared to the other treatments, while fruits harvested at 95 and 100 aborted bracts had the best post-harvest characteristics. This method was effective in determining the point of harvest in ‘BRS Princess’ banana fruits, since it allows to obtain fruit quality after storage, and is a simple and objective method.

Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

Science.gov (United States)

Dassey, Adam J; Theegala, Chandra S

2014-01-01

Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp. and Dunaliella sp. using perforated aluminium and iron electrodes under various charge densities. Aluminium electrodes were shown to be more efficient than iron electrodes when harvesting both algal species. Despite the lower harvesting efficiency, however, the iron electrodes were more energy and cost efficient. Operational costs of less than $0.03/L oil were achieved when harvesting Nannochloris sp. with iron electrodes at 35% harvest efficiency, whereas aluminium electrodes cost $0.75/L oil with 42% harvesting efficiency. Increasing the harvesting efficiencies for both aluminium and iron electrodes also increased the overall cost per litre of oil, therefore lower harvesting efficiencies with lower energy inputs was recommended. Also, increasing the culturing salinity to 2 ppt sodium chloride for freshwater Nannochloris sp. was determined practical to improve the electrocoagulation energy efficiency despite a 25% reduction in cell growth.

Wireless Energy Harvesting Using Signals from Multiple Fading Channels

KAUST Repository

Chen, Yunfei

2017-08-01

In this paper, we study the average, the probability density function and the cumulative distribution function of the harvested power. In the study, the signals are transmitted from multiple sources. The channels are assumed to be either Rician fading or Gamma-shadowed Rician fading. The received signals are then harvested by using either a single harvester for simultaneous transmissions or multiple harvesters for transmissions at different frequencies, antennas or time slots. Both linear and nonlinear models for the energy harvester at the receiver are examined. Numerical results are presented to show that, when a large amount of harvested power is required, a single harvester or the linear range of a practical nonlinear harvester are more efficient, to avoid power outage. Further, the power transfer strategy can be optimized for fixed total power. Specifically, for Rayleigh fading, the optimal strategy is to put the total power at the source with the best channel condition and switch off all other sources, while for general Rician fading, the optimum magnitudes and phases of the transmitting waveforms depend on the channel parameters.

Harvesting budworm-damaged stands for fuel

Energy Technology Data Exchange (ETDEWEB)

Henley, S.G. (York, Sunbury, Charlotte Wood Products Marketing Board, (Canada))

1985-01-01

This project was initiated to demonstrate the economics and logistics of harvesting budworm-damaged stands for use as fuel. Dead spruce and balsam fir were to be harvested from small private woodlots in southwestern New Brunswick, using an integrated, full-tree harvesting system to produce wood chip fuel and other forest products. The overall objectives of the study are listed. The harvesting equipment and the selection of sites are discussed. The most efficient methods of finding candidate woodlots was found to be by advertising and word of mouth. Contact was made with 85 woodlot owners, and 45 woodlots were visited and evaluated for their suitability. A further 150 management plans were screened and rejected for various reasons. Only 2 woodlots were initially recognized as potential sites; however, after showing some interest, the owners decided not to participate. The reasons for the rejection of the various woodlots are listed. The fact that a number of owners were against clearcutting, and, in some cases, against any cutting, and that others showed no interest in the study, is attributed to the high percentage of white-collar workers owning woodlots. Other strategies for harvesting dead or scrap wood are suggested. 1 ref., 1 tab.

Vibration energy harvesting using the Halbach array

International Nuclear Information System (INIS)

Zhu, Dibin; Beeby, Steve; Tudor, John; Harris, Nick

2012-01-01

This paper studies the feasibility of vibration energy harvesting using a Halbach array. A Halbach array is a specific arrangement of permanent magnets that concentrates the magnetic field on one side of the array while cancelling the field to almost zero on the other side. This arrangement can improve electromagnetic coupling in a limited space. The Halbach array offers an advantage over conventional layouts of magnets in terms of its concentrated magnetic field and low-profile structure, which helps improve the output power of electromagnetic energy harvesters while minimizing their size. Another benefit of the Halbach array is that due to the existence of an almost-zero magnetic field zone, electronic components can be placed close to the energy harvester without any chance of interference, which can potentially reduce the overall size of a self-powered device. The first reported example of a low-profile, planar electromagnetic vibration energy harvester utilizing a Halbach array was built and tested. Results were compared to ones for energy harvesters with conventional magnet layouts. By comparison, it is concluded that although energy harvesters with a Halbach array can have higher magnetic field density, a higher output power requires careful design in order to achieve the maximum magnetic flux gradient. (paper)

The consequences of balanced harvesting of fish communities

DEFF Research Database (Denmark)

Jacobsen, Nis Sand; Gislason, Henrik; Andersen, Ken Haste

2014-01-01

community structure and yield. We use a size- and trait-based model that resolves individual interactions through competition and predation to compare balanced harvesting with traditional selective harvesting, which protects juvenile fish from fishing. Four different exploitation patterns, generated......Balanced harvesting, where species or individuals are exploited in accordance with their productivity, has been proposed as a way to minimize the effects of fishing on marine fish communities and ecosystems. This calls for a thorough examination of the consequences balanced harvesting has on fish...... by combining selective or unselective harvesting with balanced or unbalanced fishing, are compared. We find that unselective balanced fishing, where individuals are exploited in proportion to their productivity, produces a slightly larger total maximum sustainable yield than the other exploitation patterns and...

An autonomous robot for harvesting cucumbers in greenhouses

NARCIS (Netherlands)

Henten, van E.J.; Hemming, J.; Tuijl, van B.A.J.; Kornet, J.G.; Meuleman, J.; Bontsema, J.; Os, van E.A.

2002-01-01

This paper describes the concept of an autonomous robot for harvesting cucumbers in greenhouses. A description is given of the working environment of the robot and the logistics of harvesting. It is stated that for a 2 ha Dutch nursery, 4 harvesting robots and one docking station are needed during

Fabrication of SU-8 low frequency electrostatic energy harvester

KAUST Repository

Ramadan, Khaled S.

2011-11-01

A 1500μm × 1500μm × 150μm out-of-plane, gap closing, electrostatic energy harvester is designed and fabricated to harvest low-frequency ambient vibrations. SU-8 is used to fabricate the proof mass (1200μm × 1200μm × 150μm) and the 5 m springs. Different harvesters were designed to harvest at 50, 75 and 110 Hz. At 110 Hz, Simulations show that with an input vibration of 10 μm amplitude at the frequency of resonance of the structure, the energy harvester should generate an average output power density of 0.032μW/mm3. This is the most area-efficient low-frequency electrostatic harvester to-date. © 2011 IEEE.

Carbon sequestration via wood harvest and storage: An assessment of its harvest potential

DEFF Research Database (Denmark)

Zeng, Ning; King, Anthony W.; Zaitchik, Ben

2013-01-01

A carbon sequestration strategy has recently been proposed in which a forest is actively managed, and a fraction of the wood is selectively harvested and stored to prevent decomposition. The forest serves as a ‘carbon scrubber’ or ‘carbon remover’ that provides continuous sequestration (negative ...... to be managed this way on half of the world’s forested land, or on a smaller area but with higher harvest intensity.We recommendWHS be considered part of the portfolio of climate mitigation and adaptation options that needs further research....

An optimal staggered harvesting strategy for herbaceous biomass energy crops

Energy Technology Data Exchange (ETDEWEB)

Bhat, M.G.; English, B.C. [Univ. of Tennessee, Knoxville, TN (United States)

1993-12-31

Biofuel research over the past two decades indicates lignocellulosic crops are a reliable source of feedstock for alternative energy. However, under the current technology of producing, harvesting and converting biomass crops, the cost of biofuel is not competitive with conventional biofuel. Cost of harvesting biomass feedstock is a single largest component of feedstock cost so there is a cost advantage in designing a biomass harvesting system. Traditional farmer-initiated harvesting operation causes over investment. This study develops a least-cost, time-distributed (staggered) harvesting system for example switch grass, that calls for an effective coordination between farmers, processing plant and a single third-party custom harvester. A linear programming model explicitly accounts for the trade-off between yield loss and benefit of reduced machinery overhead cost, associated with the staggered harvesting system. Total cost of producing and harvesting switch grass will decline by 17.94 percent from conventional non-staggered to proposed staggered harvesting strategy. Harvesting machinery cost alone experiences a significant reduction of 39.68 percent from moving from former to latter. The net return to farmers is estimated to increase by 160.40 percent. Per tonne and per hectare costs of feedstock production will decline by 17.94 percent and 24.78 percent, respectively. These results clearly lend support to the view that the traditional system of single period harvesting calls for over investment on agricultural machinery which escalates the feedstock cost. This social loss to the society in the form of escalated harvesting cost can be avoided if there is a proper coordination among farmers, processing plant and custom harvesters as to when and how biomass crop needs to be planted and harvested. Such an institutional arrangement benefits producers, processing plant and, in turn, end users of biofuels.

Cassava and its harvesting | La yuca y su cosecha

Directory of Open Access Journals (Sweden)

Américo Hossne García

2017-11-01

Full Text Available Cassava (Manihot esculenta Crant is one of the most important economic crops in tropical and subtropical areas. The average yield, compared to its potential, is often low. Harvesting is done with several procedures in global areas; the operation is difficult, costly and of low productivity in most regions. The primary objectives of this study were: to assess the techniques of cassava harvest under different methods, land preparation and planting, damage or break of tubers, manual and mechanized harvesting, adaptation of varieties, the effect of agronomic parameters, soil moisture during harvest, new hand tools and mechanical harvesting. The evaluation methods consisted of literature reviewing, explorations, examination of existing tools, modifications and mathematical analysis with design and calculation. As a result, an assessment is made of manual and mechanized techniques for harvesting, and recommendations are provided about mechanical properties, devices for tuber collection, genetics, seed and importance of soil moisture during harvest.

Analytical model for nonlinear piezoelectric energy harvesting devices

International Nuclear Information System (INIS)

Neiss, S; Goldschmidtboeing, F; M Kroener; Woias, P

2014-01-01

In this work we propose analytical expressions for the jump-up and jump-down point of a nonlinear piezoelectric energy harvester. In addition, analytical expressions for the maximum power output at optimal resistive load and the 3 dB-bandwidth are derived. So far, only numerical models have been used to describe the physics of a piezoelectric energy harvester. However, this approach is not suitable to quickly evaluate different geometrical designs or piezoelectric materials in the harvester design process. In addition, the analytical expressions could be used to predict the jump-frequencies of a harvester during operation. In combination with a tuning mechanism, this would allow the design of an efficient control algorithm to ensure that the harvester is always working on the oscillator's high energy attractor. (paper)

Learning and adaptation in the management of waterfowl harvests

Science.gov (United States)

Johnson, Fred A.

2011-01-01

A formal framework for the adaptive management of waterfowl harvests was adopted by the U.S. Fish and Wildlife Service in 1995. The process admits competing models of waterfowl population dynamics and harvest impacts, and relies on model averaging to compute optimal strategies for regulating harvest. Model weights, reflecting the relative ability of the alternative models to predict changes in population size, are used in the model averaging and are updated each year based on a comparison of model predictions and observations of population size. Since its inception the adaptive harvest program has focused principally on mallards (Anas platyrhynchos), which constitute a large portion of the U.S. waterfowl harvest. Four competing models, derived from a combination of two survival and two reproductive hypotheses, were originally assigned equal weights. In the last year of available information (2007), model weights favored the weakly density-dependent reproductive hypothesis over the strongly density-dependent one, and the additive mortality hypothesis over the compensatory one. The change in model weights led to a more conservative harvesting policy than what was in effect in the early years of the program. Adaptive harvest management has been successful in many ways, but nonetheless has exposed the difficulties in defining management objectives, in predicting and regulating harvests, and in coping with the tradeoffs inherent in managing multiple waterfowl stocks exposed to a common harvest. The key challenge now facing managers is whether adaptive harvest management as an institution can be sufficiently adaptive, and whether the knowledge and experience gained from the process can be reflected in higher-level policy decisions.

Spring harvest of corn stover

Energy Technology Data Exchange (ETDEWEB)

Lizotte, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

2010-07-01

Corn stover is typically left behind in the field after grain harvest. Although part of the stover should remain in the field for soil organic matter renewal and erosion protection, half of the stover could be removed sustainably. This represents about one million t dry matter (DM) of stover per year in the province of Quebec. Stover harvested in the fall is very wet. While there are applications for wet stover, the available markets currently require a dry product. Preliminary measurements have shown that stover left in the field throughout the winter becomes very dry, and a considerable amount would still be harvestable in the spring. In the spring of 2009, corn stover was harvested at 2 sites, each subdivided into 2 parcels. The first parcel was cut and raked in the fall of 2008 (fall parcel), while the second parcel was cut and raked in spring 2009. Fibre from both parcels was baled in the spring 2009. At the first site, a large square baler was used in late April to produce bales measuring 0.8 m x 0.9 m x 1.8 m. On the second site a round baler was used in late May to produce bales of 1.2 m in width by 1.45 m in diameter. On the second site, a small square baler was also used to produce bales of 0.35 m x 0.45 m x 0.60 m (spring cutting only). With the large square baler, an average of 3.9 t DM/ha was harvested equally on the fall parcel and the spring parcel, representing a 48 per cent recovery of biomass based on stover yields.

Thermodynamic limits of energy harvesting from outgoing thermal radiation.

Science.gov (United States)

Buddhiraju, Siddharth; Santhanam, Parthiban; Fan, Shanhui

2018-04-17

We derive the thermodynamic limits of harvesting power from the outgoing thermal radiation from the ambient to the cold outer space. The derivations are based on a duality relation between thermal engines that harvest solar radiation and those that harvest outgoing thermal radiation. In particular, we derive the ultimate limit for harvesting outgoing thermal radiation, which is analogous to the Landsberg limit for solar energy harvesting, and show that the ultimate limit far exceeds what was previously thought to be possible. As an extension of our work, we also derive the ultimate limit of efficiency of thermophotovoltaic systems.

Triboelectric effect in energy harvesting

Science.gov (United States)

Logothetis, I.; Vassiliadis, S.; Siores, E.

2017-10-01

With the development of wearable technology, much research has been undertaken in the field of flexible and stretchable electronics for use in interactive attire. The challenging problem wearable technology faces is the ability to provide energy whilst keeping the endproduct comfortable, light, ergonomic and nonintrusive. Energy harvesting, or energy scavenging as it is also known, is the process by which ambient energy is captured and converted into electric energy. The triboelectric effect converts mechanical energy into electrical energy based on the coupling effect of triboelectrification and electrostatic induction and is utilized as the basis for triboelectric generators (TEG). TEG’s are promising for energy harvesting due their high output power and efficiency in conjunction with simple and economical production. Due to the wide availability of materials and ease of integration, in order to produce the triboelectric effect such functional materials are effective for wearable energy harvesting systems. Flexible TEG’s can be built and embedded into attire, although a thorough understanding of the underlying principle of how TEG’s operate needs to be comprehended for the development and in incorporation in smart technical textiles. This paper presents results associated with TEG’S and discusses their suitability for energy harvesting in textiles structures.

Productivity and cost of harvesting a stemwood biomass product from integrated cut-to-length harvest operations in Australian Pinus radiata plantations

International Nuclear Information System (INIS)

Walsh, D.; Strandgard, M.

2014-01-01

Significant quantities of woody biomass from the tops of trees and larger woody ‘waste’ pieces that fall outside existing sawlog and pulpwood specifications are left on site post final harvest in Australian radiata Pinus radiata (D. Don) (radiata pine) plantations. Woody biomass is a potential product for pulp making or energy generation. Commercial use of woody biomass from radiata pine plantations would add extra value to the Australian plantation estate through improved resource utilisation, and potentially reduced post-harvesting silvicultural costs. This study investigated the productivity and cost impact of the harvest and extraction to roadside of woody biomass in an integrated harvest operation in a typical Australian two machine (harvester/processor and forwarder), cut-to-length, clearfall operation in a mature, thinned radiata pine plantation. The harvest operation yielded 23 GMt/ha (5% of the total yield) of woody biomass (known as ‘fibreplus’), 443 GMt/ha of sawlogs and 28 GMt/ha of pulpwood. The mean quantity of biomass left on site was 128 GMt/ha, mainly consisting of branches and needles, sufficient to minimise nutrient loss and protect the soil from erosion. Woodchips derived from the fibreplus product were suitable for kraft pulp making, (when blended in small amounts with clean de-barked roundwood woodchips), and for energy generation. The method trialed with the fibreplus product being produced did not impact harvesting and processing productivity and costs, but extraction was 14% less productive. Through analysis of the productivities of each phase and development of a cost model the harvest and extraction of the fibreplus product was estimated to increase total unit costs by ∼4.9%. - Highlights: • Study of the productivity and cost impact of producing a woody biomass product. • We compared two scenarios – harvesting with and without the biomass product. • An additional 23 GMt/ha (5% of the total yield) of woody biomass

Conceptual design of a chickpea harvesting header

Directory of Open Access Journals (Sweden)

H. Golpira

2013-07-01

Full Text Available Interest in the development of stripper headers is growing owing to the excessive losses of combine harvesters and costs of manually harvesting for chickpeas. The design of a new concept can enhance the mechanized process for chickpea harvesting. A modified stripper platform was designed, in which passive fingers with V-shape slots removes the pods from the anchored plant. The floating platform was accompanied by a reel to complete the harvesting header. Black-box modeling was used to redesign the functional operators of the header followed by an investigation of the system behavior. Physical models of the platform and reel were modified to determine the crucial variables of the header arrangement during field trials. The slot width was fixed at 40 mm, finger length at 40 mm, keyhole diameter at 10 mm and entrance width at 6 mm; the batted reel at peripheral diameter of 700 mm and speed at 50 rpm. A tractor-mounted experimental harvester was built to evaluate the work quality of the stripper header. The performance of the prototype was tested with respect to losses and results confirmed the efficiency of the modified stripper header for chickpea harvesting. Furthermore, the header with a 1.4 m working width produced the spot work rates of 0.42 ha h-1.

Wireless Energy Harvesting Using Signals from Multiple Fading Channels

KAUST Repository

Chen, Yunfei; Zhao, Nan; Alouini, Mohamed-Slim

2017-01-01

fading or Gamma-shadowed Rician fading. The received signals are then harvested by using either a single harvester for simultaneous transmissions or multiple harvesters for transmissions at different frequencies, antennas or time slots. Both linear

Increasing global crop harvest frequency: recent trends and future directions

International Nuclear Information System (INIS)

Ray, Deepak K; Foley, Jonathan A

2013-01-01

The world’s agricultural systems face the challenge of meeting the rising demands from population growth, changing dietary preferences, and expanding biofuel use. Previous studies have put forward strategies for meeting this growing demand by increasing global crop production, either expanding the area under cultivation or intensifying the crop yields of our existing agricultural lands. However, another possible means for increasing global crop production has received less attention: increasing the frequency of global cropland harvested each year. Historically, many of the world’s croplands were left fallow, or had failed harvests, each year, foregoing opportunities for delivering crop production. Furthermore, many regions, particularly in the tropics, may be capable of multiple harvests per year, often more than are harvested today. Here we analyze a global compilation of agricultural statistics to show how the world’s harvested cropland has changed. Between 2000 and 2011, harvested land area grew roughly 4 times faster than total standing cropland area. Using a metric of cropland harvest frequency (CHF)—the ratio of land harvested each year to the total standing cropland—and its recent trends, we identify countries that harvest their croplands more frequently, and those that have the potential to increase their cropland harvest frequency. We suggest that a possible ‘harvest gap’ may exist in many countries that represents an opportunity to increase crop production on existing agricultural lands. However, increasing the harvest frequency of existing croplands could have significant environmental and social impacts, which need careful evaluation. (letter)

Energy harvesting from hydraulic pressure fluctuations

International Nuclear Information System (INIS)

Cunefare, K A; Skow, E A; Erturk, A; Savor, J; Verma, N; Cacan, M R

2013-01-01

State-of-the-art hydraulic hose and piping systems employ integral sensor nodes for structural health monitoring to avoid catastrophic failures. Energy harvesting in hydraulic systems could enable self-powered wireless sensor nodes for applications such as energy-autonomous structural health monitoring and prognosis. Hydraulic systems inherently have a high energy intensity associated with the mean pressure and flow. Accompanying the mean pressure is the dynamic pressure ripple, which is caused by the action of pumps and actuators. Pressure ripple is a deterministic source with a periodic time-domain behavior conducive to energy harvesting. An energy harvester prototype was designed for generating low-power electricity from pressure ripples. The prototype employed an axially-poled off-the-shelf piezoelectric stack. A housing isolated the stack from the hydraulic fluid while maintaining a mechanical coupling allowing for dynamic-pressure-induced deflection of the stack. The prototype exhibited an off-resonance energy harvesting problem since the fundamental resonance of the piezoelectric stack was much higher than the frequency content of the pressure ripple. The prototype was designed to provide a suitable power output for powering sensors with a maximum output of 1.2 mW. This work also presents electromechanical model simulations and experimental characterization of the piezoelectric power output from the pressure ripple in terms of the force transmitted into the harvester. (paper)

A novel bistable energy harvesting concept

International Nuclear Information System (INIS)

Scarselli, G; Nicassio, F; Pinto, F; Ciampa, F; Iervolino, O; Meo, M

2016-01-01

Bistable energy harvesting has become a major field of research due to some unique features for converting mechanical energy into electrical power. When properly loaded, bistable structures snap-through from one stable configuration to another, causing large strains and consequently power generation. Moreover, bistable structures can harvest energy across a broad-frequency bandwidth due to their nonlinear characteristics. Despite the fact that snap-through may be triggered regardless of the form or frequency of exciting vibration, the external force must reach a specific snap-through activation threshold value to trigger the transition from one stable state to another. This aspect is a limiting factor for realistic vibration energy harvesting application with bistable devices. This paper presents a novel power harvesting concept for bistable composites based on a ‘lever effect’ aimed at minimising the activation force to cause the snap through by choosing properly the bistable structures’ constraints. The concept was demonstrated with the help of numerical simulation and experimental testing. The results showed that the actuation force is one order of magnitude smaller (3%–6%) than the activation force of conventionally constrained bistable devices. In addition, it was shown that the output voltage was higher than the conventional configuration, leading to a significant increase in power generation. This novel concept could lead to a new generation of more efficient bistable energy harvesters for realistic vibration environments. (paper)

Performance Limits of Communication with Energy Harvesting

KAUST Repository

Znaidi, Mohamed Ridha

2016-01-01

In energy harvesting communications, the transmitters have to adapt transmission to the availability of energy harvested during communication. The performance of the transmission depends on the channel conditions which vary randomly due to mobility

Electronically droplet energy harvesting using piezoelectric cantilevers

KAUST Repository

Al Ahmad, Mahmoud Al; Jabbour, Ghassan E.

2012-01-01

A report is presented on free falling droplet energy harvesting using piezoelectric cantilevers. The harvester incorporates a multimorph clamped-free cantilever which is composed of five layers of lead zirconate titanate piezoelectric thick films

Cost, energy use and GHG emissions for forest biomass harvesting operations

International Nuclear Information System (INIS)

Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang; Yu, Chunxia

2016-01-01

For forest-based biomass to become a significant contribution to the United States' energy portfolio, harvesting operations must be physically feasible and economically viable. An assessment of cost, energy and greenhouse gas (GHG) emissions of forest biomass harvesting was conducted. The assessment differentiates harvesting systems by cut-to-length and whole tree; harvest types of 30%, 70%, and 100% cut; and forest types of hardwoods, softwoods, mixed hardwood/softwood, and softwood plantations. Harvesting cost models were developed for economic assessment and life cycle energy and emission assessment was applied to calculate energy and emissions for different harvesting scenarios, considering material and energy inputs (machinery, diesel, etc.) and outputs (GHG emissions) for each harvesting process (felling, forwarding/skidding, etc.). The developed harvesting cost models and the life cycle energy and emission assessment method were applied in Michigan, U.S. using information collected from different sources. A sensitivity analysis was performed for selected input variables for the harvesting operations in order to explore their relative importance. The results indicated that productivity had the largest impact on harvesting cost followed by machinery purchase price, yearly scheduled hours, and expected utilization. Productivity and fuel use, as well as fuel factors, are the most influential environmental impacts of harvesting operations. - Highlights: • Life cycle energy and emissions for forest biomass harvesting operations. • Harvesting cost models were developed for economic assessment. • Productivity had the largest impact on harvesting cost. • Fuel use contributes the most emissions while lubricants contribute the least.

Broadband piezoelectric energy harvesting using nonlinear magnetic forces; Bandbreitensteigerung von piezoelektrischen Energy Harvesting Systemen durch Magnetkraefte

Energy Technology Data Exchange (ETDEWEB)

Westermann, Henrik; Neubauer, Marcus; Wallaschek, Joerg [Hannover Univ. (Germany). Inst. fuer Dynamik und Schwingungen

2012-07-15

Using ambient energy by piezoelectric energy harvesting systems received much attention over the last years. Most vibration-based generators produce a sufficient power only if the transducer is excited in its resonance frequency. The use of magnetic forces suggests a promising strategy to increase the efficiency. This paper presents different ways for broadband piezoelectric energy harvesting using nonlinear magnetic forces. (orig.)

Design guidelines of triboelectric nanogenerator for water wave energy harvesters

KAUST Repository

Ahmed, Abdelsalam

2017-04-11

Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester\\'s overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

Piezoelectric energy harvesting

International Nuclear Information System (INIS)

Howells, Christopher A

2009-01-01

Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed.

A new piezoelectric energy harvesting design concept: multimodal energy harvesting skin.

Science.gov (United States)

Lee, Soobum; Youn, Byeng D

2011-03-01

This paper presents an advanced design concept for a piezoelectric energy harvesting (EH), referred to as multimodal EH skin. This EH design facilitates the use of multimodal vibration and enhances power harvesting efficiency. The multimodal EH skin is an extension of our previous work, EH skin, which was an innovative design paradigm for a piezoelectric energy harvester: a vibrating skin structure and an additional thin piezoelectric layer in one device. A computational (finite element) model of the multilayered assembly - the vibrating skin structure and piezoelectric layer - is constructed and the optimal topology and/or shape of the piezoelectric layer is found for maximum power generation from multiple vibration modes. A design rationale for the multimodal EH skin was proposed: designing a piezoelectric material distribution and external resistors. In the material design step, the piezoelectric material is segmented by inflection lines from multiple vibration modes of interests to minimize voltage cancellation. The inflection lines are detected using the voltage phase. In the external resistor design step, the resistor values are found for each segment to maximize power output. The presented design concept, which can be applied to any engineering system with multimodal harmonic-vibrating skins, was applied to two case studies: an aircraft skin and a power transformer panel. The excellent performance of multimodal EH skin was demonstrated, showing larger power generation than EH skin without segmentation or unimodal EH skin.

Identifying ecological corridors for Amur tigers (Panthera tigris altaica) and Amur leopards (Panthera pardus orientalis).

Science.gov (United States)

Miquelle, Dale G; Rozhnov, Vyachaslav V; Ermoshin, Victor; Murzin, Andre A; Nikolaev, Igor G; Hernandez-Blanco, Jose A; Naidenko, Sergie V

2015-07-01

The rapid explosion of human populations and the associated development of human-dominated landscapes have drastically reduced and fragmented habitat for tigers (Panthera tigris) and leopards (Panthera pardus) across Asia, resulting in multiple small populations. However, Amur tiger (Panthera tigris altaica) habitat in Russia has remained largely interconnected, except for a break between tigers in southwest Primorye and the southern Sikhote-Alin Mountains. This habitat patch in southwest Primorye also retains the last population of Amur leopards (Panthera pardus orientalis). Genetic differentiation of tigers in southwest Primorye and the Sikhote-Alin Mountains along with survey data suggest that habitat fragmentation is limiting movement of tigers and leopards across the Razdolnaya River basin. We looked at historical and recent survey data on tigers and leopards and mapped existing cover types to examine land-use patterns of both large felids and humans in the development strip along the Razdolnaya River. We then used least-cost distance analyses to identify the most effective potential corridor to retain connectivity for large felids between Land of the Leopard National Park and Ussuriskii Zapovednik (Reserve). We identified a single potential corridor that still exists with a total distance of 62.5 km from Land of the Leopard National Park to Ussuriskii Zapovednik, mostly (93%) through forested habitat. We recommend formal recognition of a Razdolnaya ecological corridor and provide specific recommendations for each of 3 proposed management sections. © 2015 International Society of Zoological Sciences, Institute of Zoology/Chinese Academy of Sciences and Wiley Publishing Asia Pty Ltd.

Natural coinfection by Streptococcus agalactiae and Francisella noatunensis subsp. orientalis in farmed Nile tilapia (Oreochromis niloticus L.).

Science.gov (United States)

Assis, G B N; Tavares, G C; Pereira, F L; Figueiredo, H C P; Leal, C A G

2017-01-01

Streptococcus agalactiae and Francisella noatunensis subsp. orientalis (Fno) are important pathogens for farm-raised tilapia worldwide. There are no reports of coinfection caused by S. agalactiae and Fno in fish. This study aimed to determine the aetiology of atypical mortalities in a cage farm of Nile tilapia and to characterize the genetic diversity of the isolates. Fifty-two fish were sampled and subjected to parasitological and bacteriological examination. The S. agalactiae and Fno isolates were genotyped using MLST and REP-PCR, respectively. Whole-genome sequencing was performed to confirm the MLST results. Seven fish were shown coinfected by S. agalactiae and Fno. Chronic hypoxia and a reduction in the water temperature were determined as risk factors for coinfection. Fno isolates were shown clonally related in REP-PCR. The MLST analysis revealed that the S. agalactiae isolates from seven coinfected fish were negative for the glcK gene; however, these were determined to be members of clonal complex CC-552. This is the first description of coinfection by S. agalactiae and Fno in farm-raised Nile tilapia. The coinfection was predisposed by chronic hypoxia and was caused by the main genotypes of S. agalactiae and Fno reported in Brazil. Finally, a new S. agalactiae genotype with glcK gene partially deleted was described. © 2016 John Wiley & Sons Ltd.

African Urban Harvest

International Development Research Centre (IDRC) Digital Library (Canada)

Urban Harvest, a system-wide initiative of the Consultative Group on Agricultural ...... and urban old, using criteria of population density, land availability, and the prevalence of crop ...... Contact between milk and containers or the environment;.

Harvester operator learnig efficiency analysis

OpenAIRE

Malovrh, Špela; Košir, Boštjan; Krč, Janez

2004-01-01

The article considers the possibilities of training future harvester operators. The course of learning with a simulator is described and analysed on the first such example in Slovenia. The times of individual processes are measured in two candidates. The paper describes the operation of a learning simulator for work on the harvester Timberjack 1270 D and the proceedings of aone-week course. A comparison between candidates regarding the consumption oftime and number of damages to the virtual m...

Nyala and Bushbuck II: A Harvesting Model.

Science.gov (United States)

Fay, Temple H.; Greeff, Johanna C.

1999-01-01

Adds a cropping or harvesting term to the animal overpopulation model developed in Part I of this article. Investigates various harvesting strategies that might suggest a solution to the overpopulation problem without actually culling any animals. (ASK)

Chemical desiccation for early harvest in soybean cultivars

Directory of Open Access Journals (Sweden)

Tamara Pereira

2015-08-01

Full Text Available The use of desiccants is an alternative to anticipate the soybean harvest and keep the physiological quality of seed. The objective of this work was to assess the production performance and germination seeds in response to differents stages and desiccation chemicals products to early harvest of soybean cultivars. The experiment was conducted in Campos Novos, in two harvests, it was used a randomized complete block design disposed in split-split-plots. Two phenological stages of application (stage R7.1 and R7.3 were tested in the main plot. Five soybean cultivars (NA 5909 RG, CD 2585 RR, BMX Turbo RR, SYN 1059 RR and BENSO 1RR were evaluated in the subplots, and three desiccants ammonium glufosinate, paraquat, carfentrazone-ethyl in the 2011/12 season and one control (without the desiccant application were evaluated in the sub-subplots. In the 2012/13 season the carfentrazone-ethyl was substituted by diquat. It were evaluated the number of the days in the early harvest, yield, number of pods per plant, number of seeds per pod, mass of 100 seeds and germination percentage. The chemical dessecation with the use of glufosinate ammonium and paraquat applied in R7.1 stage allowed to anticipate the harvest in six days (2011/12 and provided maintenance germination percentage (90% and 92% compared to control (76%. The dessecation didn’t influence negatively on seeds productivity, but reduced the mass of seeds in the two growing seasons, and early harvest was dependent of pre-harvest rain absence, with this preamble. The use of dessicants is a possibility of early harvest in production field of soybean seeds.

Energy harvesting devices for harvesting energy from terahertz electromagnetic radiation

Science.gov (United States)

Novack, Steven D.; Kotter, Dale K.; Pinhero, Patrick J.

2012-10-09

Methods, devices and systems for harvesting energy from electromagnetic radiation are provided including harvesting energy from electromagnetic radiation. In one embodiment, a device includes a substrate and one or more resonance elements disposed in or on the substrate. The resonance elements are configured to have a resonant frequency, for example, in at least one of the infrared, near-infrared and visible light spectra. A layer of conductive material may be disposed over a portion of the substrate to form a ground plane. An optical resonance gap or stand-off layer may be formed between the resonance elements and the ground plane. The optical resonance gap extends a distance between the resonance elements and the layer of conductive material approximately one-quarter wavelength of a wavelength of the at least one resonance element's resonant frequency. At least one energy transfer element may be associated with the at least one resonance element.

Experimental study of energy harvesting in UHF band

International Nuclear Information System (INIS)

Bernacki, Ł; Gozdur, R; Salamon, N

2016-01-01

A huge progress of down-sizing technology together with trend of decreasing power consumption and, on the other hand, increasing efficiency of electronics give the opportunity to design and to implement the energy harvesters as main power sources. This paper refers to the energy that can be harvested from electromagnetic field in the unlicensed frequency bands. The paper contains description of the most popular techniques and transducers that can be applied in energy harvesting domain. The overview of current research and commercial solutions was performed for bands in ultra-high frequency range, which are unlicensed and where transmission is not limited by administrative arrangements. During the experiments with Powercast’s receiver, the same bands as sources of electromagnetic field were taken into account. This power source is used for conducting radio-communication process and excess energy could be used for powering the extra electronic circuits. The paper presents elaborated prototype of energy harvesting system and the measurements of power harvested in ultra-high frequency range. The evaluation of RF energy harvesters for powering ultra-low power (ULP) electronic devices was performed based on survey and results of the experiments. (paper)

Pen harvester for powering a pulse rate sensor

International Nuclear Information System (INIS)

Bedekar, Vishwas; Oliver, Josiah; Priya, Shashank

2009-01-01

Rapid developments in the area of micro-sensors for various applications such as structural health monitoring, bio-chemical sensors and pressure sensors have increased the demand for portable, low cost, high efficiency energy harvesting devices. In this paper, we describe the scheme for powering a pulse rate sensor with a vibration energy harvester integrated inside a pen commonly carried by humans in the pocket close to the heart. Electromagnetic energy harvesting was selected in order to achieve high power at lower frequencies. The prototype pen harvester was found to generate 3 mW at 5 Hz and 1 mW at 3.5 Hz operating under displacement amplitude of 16 mm (corresponding to an acceleration of approximately 1.14 g rms at 5 Hz and 0.56 g rms at 3.5 Hz, respectively). A comprehensive mathematical modelling and simulations were performed in order to optimize the performance of the vibration energy harvester. The integrated pen harvester prototype was found to generate continuous power of 0.46-0.66 mW under normal human actions such as jogging and jumping which is enough for a small scale pulse rate sensor.

EU mitigation potential of harvested wood products.

Science.gov (United States)

Pilli, Roberto; Fiorese, Giulia; Grassi, Giacomo

2015-12-01

The new rules for the Land Use, Land Use Change and Forestry sector under the Kyoto Protocol recognized the importance of Harvested Wood Products (HWP) in climate change mitigation. We used the Tier 2 method proposed in the 2013 IPCC KP Supplement to estimate emissions and removals from HWP from 1990 to 2030 in EU-28 countries with three future harvest scenarios (constant historical average, and +/-20% in 2030). For the historical period (2000-2012) our results are consistent with other studies, indicating a HWP sink equal on average to -44.0 Mt CO 2 yr -1 (about 10% of the sink by forest pools). Assuming a constant historical harvest scenario and future distribution of the total harvest among each commodity, the HWP sink decreases to -22.9 Mt CO 2 yr -1 in 2030. The increasing and decreasing harvest scenarios produced a HWP sink of -43.2 and -9.0 Mt CO 2 yr -1 in 2030, respectively. Other factors may play an important role on HWP sink, including: (i) the relative share of different wood products, and (ii) the combined effect of production, import and export on the domestic production of each commodity. Maintaining a constant historical harvest, the HWP sink will slowly tend to saturate, i.e. to approach zero in the long term. The current HWP sink will be maintained only by further increasing the current harvest; however, this will tend to reduce the current sink in forest biomass, at least in the short term. Overall, our results suggest that: (i) there is limited potential for additional HWP sink in the EU; (ii) the HWP mitigation potential should be analyzed in conjunction with other mitigation components (e.g. sink in forest biomass, energy and material substitution by wood).

MEMS-based thick film PZT vibrational energy harvester

DEFF Research Database (Denmark)

Lei, Anders; Xu, Ruichao; Thyssen, Anders

2011-01-01

We present a MEMS-based unimorph silicon/PZT thick film vibrational energy harvester with an integrated proof mass. We have developed a process that allows fabrication of high performance silicon based energy harvesters with a yield higher than 90%. The process comprises a KOH etch using a mechan......We present a MEMS-based unimorph silicon/PZT thick film vibrational energy harvester with an integrated proof mass. We have developed a process that allows fabrication of high performance silicon based energy harvesters with a yield higher than 90%. The process comprises a KOH etch using...... a mechanical front side protection of an SOI wafer with screen printed PZT thick film. The fabricated harvester device produces 14.0 μW with an optimal resistive load of 100 kΩ from 1g (g=9.81 m s-2) input acceleration at its resonant frequency of 235 Hz....

Hybrid energy harvesting using active thermal backplane

Science.gov (United States)

Kim, Hyun-Wook; Lee, Dong-Gun

2016-04-01

In this study, we demonstrate the concept of a new hybrid energy harvesting system by combing solar cells with magneto-thermoelectric generator (MTG, i.e., thermal energy harvesting). The silicon solar cell can easily reach high temperature under normal operating conditions. Thus the heated solar cell becomes rapidly less efficient as the temperature of solar cell rises. To increase the efficiency of the solar cell, air or water-based cooling system is used. To surpass conventional cooling devices requiring additional power as well as large working space for air/water collectors, we develop a new technology of pairing an active thermal backplane (ATB) to solar cell. The ATB design is based on MTG technology utilizing the physics of the 2nd order phase transition of active ferromagnetic materials. The MTG is cost-effective conversion of thermal energy to electrical energy and is fundamentally different from Seebeck TEG devices. The ATB (MTG) is in addition to being an energy conversion system, a very good conveyor of heat through both conduction and convection. Therefore, the ATB can provide dual-mode for the proposed hybrid energy harvesting. One is active convective and conductive cooling for heated solar cell. Another is active thermal energy harvesting from heat of solar cell. These novel hybrid energy harvesting device have potentially simultaneous energy conversion capability of solar and thermal energy into electricity. The results presented can be used for better understanding of hybrid energy harvesting system that can be integrated into commercial applications.

Biogeography of photosynthetic light-harvesting genes in marine phytoplankton.

Directory of Open Access Journals (Sweden)

Thomas S Bibby

Full Text Available BACKGROUND: Photosynthetic light-harvesting proteins are the mechanism by which energy enters the marine ecosystem. The dominant prokaryotic photoautotrophs are the cyanobacterial genera Prochlorococcus and Synechococcus that are defined by two distinct light-harvesting systems, chlorophyll-bound protein complexes or phycobilin-bound protein complexes, respectively. Here, we use the Global Ocean Sampling (GOS Project as a unique and powerful tool to analyze the environmental diversity of photosynthetic light-harvesting genes in relation to available metadata including geographical location and physical and chemical environmental parameters. METHODS: All light-harvesting gene fragments and their metadata were obtained from the GOS database, aligned using ClustalX and classified phylogenetically. Each sequence has a name indicative of its geographic location; subsequent biogeographical analysis was performed by correlating light-harvesting gene budgets for each GOS station with surface chlorophyll concentration. CONCLUSION/SIGNIFICANCE: Using the GOS data, we have mapped the biogeography of light-harvesting genes in marine cyanobacteria on ocean-basin scales and show that an environmental gradient exists in which chlorophyll concentration is correlated to diversity of light-harvesting systems. Three functionally distinct types of light-harvesting genes are defined: (1 the phycobilisome (PBS genes of Synechococcus; (2 the pcb genes of Prochlorococcus; and (3 the iron-stress-induced (isiA genes present in some marine Synechococcus. At low chlorophyll concentrations, where nutrients are limited, the Pcb-type light-harvesting system shows greater genetic diversity; whereas at high chlorophyll concentrations, where nutrients are abundant, the PBS-type light-harvesting system shows higher genetic diversity. We interpret this as an environmental selection of specific photosynthetic strategy. Importantly, the unique light-harvesting system isiA is found

Felling and skidding productivity and harvesting cost in southern pine forests

Science.gov (United States)

R.A. Kluender; B.J. Stokes

1996-01-01

Sixteen stands were harvested at various levels of basal area removed (intensity). Chainsaw felling productivity was more sensitive to stem diameter than harvest intensity. Skidding productivity was highest when removing large trees at high intensity. Harvesting cost was more sensitive to stem size than harvest intensity, although harvest intensity was a very important...

Assessment of rainwater harvesting potential using GIS

Science.gov (United States)

Hari, Durgasrilakshmi; Ramamohan Reddy, K.; Vikas, Kola; Srinivas, N.; Vikas, G.

2018-03-01

Rainwater harvesting (RWH) is one of the best practices to overcome the scarcity of water. Rainwater harvesting involves collection and storage of rainwater locally through different technologies, for future use. It is also useful for livestock, groundwater recharge and for irrigation practices. Potential of rainwater harvesting refers to the capacity of an individual catchment that harnesses the water falling on the catchment during a particular year considering all rainy days. The present study deals with the identification of the study area boundary and marking it as a Polygon in Google Earth Pro Later, Rooftops of various house entities and roads were digitized using the Polygon command in Google Earth Pro. GIS technique is employed for locating boundaries of the study area and for calculating the areas of various types of rooftops and roads. With the application of GIS, it is possible to assess the total potential of water that can be harvested. The present study will enable us to identify the suitable type of water harvesting structure along with the number of structures required. It is extremely an ideal and effective solution to overcome the water crisis through water conservation in the study area.

Production economics of harvesting young hardwood stands in central Appalachia

Science.gov (United States)

Yaoxiang Li; Jingxin Wang; Gary W. Miller; Joe McNeel

2004-01-01

Three harvesting systems of chainsaw/cable skidder, fell-buncher/grapple skidder, and harvester/forwarder were simulated in harvesting three hardwood stands of 30 to 50 years old in central Appalachia. Stands were generated by using a stand generator and harvesting prescriptions included clearcut, shelterwood cut, selective cut, diameter limit cut, and crop tree...

The case for energy harvesting on wildlife in flight

International Nuclear Information System (INIS)

Shafer, Michael W; MacCurdy, Robert; Garcia, Ephrahim; Shipley, J Ryan; Winkler, David; Guglielmo, Christopher G

2015-01-01

The confluence of advancements in microelectronic components and vibrational energy harvesting has opened the possibility of remote sensor units powered solely from the motion of their hosts. There are numerous applications of such systems, including the development of modern wildlife tracking/data-logging devices. These ‘bio-logging’ devices are typically mass-constrained because they must be carried by an animal. Thus, they have historically traded scientific capability for operational longevity due to restrictions on battery size. Recently, the precipitous decrease in the power requirements of microelectronics has been accompanied by advancements in the area of piezoelectric vibrational energy harvesting. These energy harvesting devices are now capable of powering the type of microelectronic circuits used in bio-logging devices. In this paper we consider the feasibility of employing these vibrational energy harvesters on flying vertebrates for the purpose of powering a bio-logging device. We show that the excess energy available from birds and bats could be harvested without adversely affecting their overall energy budget. We then present acceleration measurements taken on flying birds in a flight tunnel to understand modulation of flapping frequency during steady flight. Finally, we use a recently developed method of estimating the maximum power output from a piezoelectric energy harvester to determine the amount of power that could be practically harvested from a flying bird. The results of this analysis show that the average power output of a piezoelectric energy harvester mounted to a bird or bat could produce more than enough power to run a bio-logging device. We compare the power harvesting capabilities to the energy requirements of an example system and conclude that vibrational energy harvesting on flying birds and bats is viable and warrants further study, including testing. (paper)

Nanoscale piezoelectric vibration energy harvester design

Science.gov (United States)

Foruzande, Hamid Reza; Hajnayeb, Ali; Yaghootian, Amin

2017-09-01

Development of new nanoscale devices has increased the demand for new types of small-scale energy resources such as ambient vibrations energy harvesters. Among the vibration energy harvesters, piezoelectric energy harvesters (PEHs) can be easily miniaturized and fabricated in micro and nano scales. This change in the dimensions of a PEH leads to a change in its governing equations of motion, and consequently, the predicted harvested energy comparing to a macroscale PEH. In this research, effects of small scale dimensions on the nonlinear vibration and harvested voltage of a nanoscale PEH is studied. The PEH is modeled as a cantilever piezoelectric bimorph nanobeam with a tip mass, using the Euler-Bernoulli beam theory in conjunction with Hamilton's principle. A harmonic base excitation is applied as a model of the ambient vibrations. The nonlocal elasticity theory is used to consider the size effects in the developed model. The derived equations of motion are discretized using the assumed-modes method and solved using the method of multiple scales. Sensitivity analysis for the effect of different parameters of the system in addition to size effects is conducted. The results show the significance of nonlocal elasticity theory in the prediction of system dynamic nonlinear behavior. It is also observed that neglecting the size effects results in lower estimates of the PEH vibration amplitudes. The results pave the way for designing new nanoscale sensors in addition to PEHs.

NUTRIENT BALANCE IN WATER HARVESTING SOILS

Directory of Open Access Journals (Sweden)

Díaz, F

2005-05-01

Full Text Available Dryland farming on Fuerteventura and Lanzarote (Canary Islands, Spain, which has an annual rainfall of less than 150 mm/year, has been based traditionally on water harvesting techniques (known locally as “gavias”. Periods of high productivity alternate with those of very low yield. The systems are sustainable in that they reduce erosive processes, contribute to soil and soil-water conservation and are largely responsible for maintaining the soil’s farming potential. In this paper we present the chemical fertility status and nutrient balance of soils in five “gavia” systems. The results are compared with those obtained in adjacent soils where this water harvesting technique is not used. The main crops are wheat, barley, maize, lentils and chick-peas. Since neither organic nor inorganic fertilisers are used, nutrients are derived mainly from sediments carried by runoff water. Nutrients are lost mainly through crop harvesting and harvest residues. The soils where water harvesting is used have lower salt and sodium in the exchange complex, are higher in carbon, nitrogen, copper and zinc and have similar phosphorous and potassium content. It is concluded that the systems improve the soil’s natural fertility and also that natural renovation of nutrients occurs thanks to the surface deposits of sediments, which mix with the arable layer. The system helps ensure adequate fertility levels, habitual in arid regions, thus allowing dryland farming to be carried out.

The role of the Business Environment in Harvesting Strategies

Directory of Open Access Journals (Sweden)

Deidré van Rooyen

2010-12-01

Full Text Available Harvesting is made up of many different strategies that can be used by entrepreneurs to exit their business. This is a long-term ambition to create real value to the business. In Beaufort West, a uranium mining development is going to take place and thus create opportunities for existing and new businesses. This study investigates how the changing business environment will influence this harvesting choice made by the entrepreneur. Recommendations indicate that entrepreneurs need more information and training regarding the specific harvesting concept and strategies that are available, because no specific harvesting strategy was noted as important by the entrepreneurial respondents. Keywords and phrases: business environment; harvesting; exit; business; entrepreneur; uranium

Survival models for harvest management of mourning dove populations

Science.gov (United States)

Otis, D.L.

2002-01-01

Quantitative models of the relationship between annual survival and harvest rate of migratory game-bird populations are essential to science-based harvest management strategies. I used the best available band-recovery and harvest data for mourning doves (Zenaida macroura) to build a set of models based on different assumptions about compensatory harvest mortality. Although these models suffer from lack of contemporary data, they can be used in development of an initial set of population models that synthesize existing demographic data on a management-unit scale, and serve as a tool for prioritization of population demographic information needs. Credible harvest management plans for mourning dove populations will require a long-term commitment to population monitoring and iterative population analysis.

Harvesting options of small-diameter wood from early thinnings

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Petty, A. (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi; Mutikainen, A. (TTS Research, Rajamaeki (Finland)), e-mail: arto.mutikainen@tts.fi

2010-07-01

The integrated harvesting of industrial roundwood and energy wood by the so-called 'two-pile cutting method' has increased steadily in young forests in Finland during the last three years. The studies carried out by Metsaeteho Oy and TTS Research (i) determined the time consumption and productivity in cutting work when using the integrated cutting of first-thinning wood, (ii) clarified the development of the total removal in integrated harvesting operation, and (iii) investigated the quality of pulpwood poles when using integrated cutting with multi-tree handling. The studies indicated that the total removal in integrated wood harvesting increase significantly compared to that of conventional, separate roundwood harvesting. When the total removal from the harvesting site increased considerable, there was a significant increase in the productivity of cutting work in integrated wood harvesting compared to the situation in separate pulpwood harvesting. In addition, the delimbing quality and bucking accuracy of the pulpwood poles obtained in multi-tree processing were comparable to those produced in single-tree handling. There were no problems with measuring the work output by a weight scale attached to the crane of the forwarder. As the studies indicated very promising results with integrated wood cutting, integrated harvesting is likely to continue to increase in both first and later thinnings in Finland. (orig.)

Energy harvesting for human wearable and implantable bio-sensors.

Science.gov (United States)

Mitcheson, Paul D

2010-01-01

There are clear trade-offs between functionality, battery lifetime and battery volume for wearable and implantable wireless-biosensors which energy harvesting devices may be able to overcome. Reliable energy harvesting has now become a reality for machine condition monitoring and is finding applications in chemical process plants, refineries and water treatment works. However, practical miniature devices that can harvest sufficient energy from the human body to power a wireless bio-sensor are still in their infancy. This paper reviews the options for human energy harvesting in order to determine power availability for harvester-powered body sensor networks. The main competing technologies for energy harvesting from the human body are inertial kinetic energy harvesting devices and thermoelectric devices. These devices are advantageous to some other types as they can be hermetically sealed. In this paper the fundamental limit to the power output of these devices is compared as a function of generator volume when attached to a human whilst walking and running. It is shown that the kinetic energy devices have the highest fundamental power limits in both cases. However, when a comparison is made between the devices using device effectivenesses figures from previously demonstrated prototypes presented in the literature, the thermal device is competitive with the kinetic energy harvesting device when the subject is running and achieves the highest power density when the subject is walking.

OPERATIONALANALYSIS OF MECHANICAL CUT-TO-LENGTH FOREST HARVESTING SYSTEM

Directory of Open Access Journals (Sweden)

Nilton Cesar Fiedler

2017-08-01

Full Text Available ABSTRACT The objective of this research was to conduct an operational analysis of forest harvesting activities in a mechanized of the system cut to length in eucalypt plantations in south of Bahia, to determine the distribution of operation times, productivity, operational efficiency and mechanical availability of two models of harvester and two models of forwarder, evaluating these machines in three modules harvesting methodology through time and motion studies. Auxiliary activities corresponded to the lowest percentages within the operating times (mean 1.9% to 1.8% for harvester and forwarder, already operating activities were those that had the highest percentages. The first shift was presented the worst results of operations for the harvester (average 66.3% and the third shift for the forwarder (55.5%. For the harvester module 1 showed the best result of productive times (average 70.36%. In relation to the forwarder, this same module showed the worst results with unproductive times (average of 22.17%. The availability and mechanical parameters were superior productivity for the forwarder (mean 82.31% and 51.33 m3/h, respectively, as indicators of degree of utilization and operational efficiency were higher in harvester (average 85.01% and 66.41%, respectively. Thus, for the forwarder, the parameters mechanical availability and productivity were higher, while for the harvester, they were the indicators of degree of utilization and operational efficiency

Removal intensity and tree size effects on harvesting cost and profitability

Science.gov (United States)

R. Kluender; D. Lortz; W. McCoy; B. Stokes; J. Klepac

1997-01-01

Sixteen stands were harvested at intensities (proportion of basal area removed) ranging from 0.27 to 1.00. Logging contractors used chain saws and rubber-tired skidders. Harvested sites were similar in slope and tree size. Harvest cost per hundred cubic feet of wood (CCF) was inversely related to harvest intensity and tree size. Harvesting profitability per CCF was...

Heading Estimation of Robot Combine Harvesters during Turning Maneuveres.

Science.gov (United States)

Rahman, Md Mostafizar; Ishii, Kazunobu

2018-05-01

Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs) for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

Recent Progress on PZT Based Piezoelectric Energy Harvesting Technologies

Directory of Open Access Journals (Sweden)

Min-Gyu Kang

2016-02-01

Full Text Available Energy harvesting is the most effective way to respond to the energy shortage and to produce sustainable power sources from the surrounding environment. The energy harvesting technology enables scavenging electrical energy from wasted energy sources, which always exist everywhere, such as in heat, fluids, vibrations, etc. In particular, piezoelectric energy harvesting, which uses a direct energy conversion from vibrations and mechanical deformation to the electrical energy, is a promising technique to supply power sources in unattended electronic devices, wireless sensor nodes, micro-electronic devices, etc., since it has higher energy conversion efficiency and a simple structure. Up to now, various technologies, such as advanced materials, micro- and macro-mechanics, and electric circuit design, have been investigated and emerged to improve performance and conversion efficiency of the piezoelectric energy harvesters. In this paper, we focus on recent progress of piezoelectric energy harvesting technologies based on PbZrxTi1-xO3 (PZT materials, which have the most outstanding piezoelectric properties. The advanced piezoelectric energy harvesting technologies included materials, fabrications, unique designs, and properties are introduced to understand current technical levels and suggest the future directions of piezoelectric energy harvesting.

NMR-Based Metabolomic Study on Isatis tinctoria: Comparison of Different Accessions, Harvesting Dates, and the Effect of Repeated Harvesting.

Science.gov (United States)

Guldbrandsen, Niels; Kostidis, Sarantos; Schäfer, Hartmut; De Mieri, Maria; Spraul, Manfred; Skaltsounis, Alexios-Leandros; Mikros, Emmanuel; Hamburger, Matthias

2015-05-22

Isatis tinctoria is an ancient dye and medicinal plant with potent anti-inflammatory and antiallergic properties. Metabolic differences were investigated by NMR spectroscopy of accessions from different origins that were grown under identical conditions on experimental plots. For these accessions, metabolite profiles at different harvesting dates were analyzed, and single and repeatedly harvested plants were compared. Leaf samples were shock-frozen in liquid N2 immediately after being harvested, freeze-dried, and cryomilled prior to extraction. Extracts were prepared by pressurized liquid extraction with ethyl acetate and 70% aqueous methanol. NMR spectra were analyzed using a combination of different methods of multivariate data analysis such as principal component analysis (PCA), canonical analysis (CA), and k-nearest neighbor concept (k-NN). Accessions and harvesting dates were well separated in the PCA/CA/k-NN analysis in both extracts. Pairwise statistical total correlation spectroscopy (STOCSY) revealed unsaturated fatty acids, porphyrins, carbohydrates, indole derivatives, isoprenoids, phenylpropanoids, and minor aromatic compounds as the cause of these differences. In addition, the metabolite profile was affected by the repeated harvest regime, causing a decrease of 1,5-anhydroglucitol, sucrose, unsaturated fatty acids, porphyrins, isoprenoids, and a flavonoid.

Energy Harvesting From Low Frequency Applications Using Piezoelectric Materials

Energy Technology Data Exchange (ETDEWEB)

Li, Huidong; Tian, Chuan; Deng, Zhiqun

2014-11-06

This paper reviewed the state of research on piezoelectric energy harvesters. Various types of harvester configurations, piezoelectric materials, and techniques used to improve the mechanical-to-electrical energy conversion efficiency were discussed. Most of the piezoelectric energy harvesters studied today have focused on scavenging mechanical energy from vibration sources due to their abundance in both natural and industrial environments. Cantilever beams have been the most studied structure for piezoelectric energy harvester to date because of the high responsiveness to small vibrations.

Clinicopathological comparisons of open vein harvesting and endoscopic vein harvesting in coronary artery bypass grafting patients in Mashhad.

Science.gov (United States)

Amouzeshi, Ahmad; Teshnisi, Mohamad Abbassi; Zirak, Nahid; Shamloo, Alireza Sepehri; Hoseinikhah, Hamid; Alizadeh, Behzad; Moeinipour, Aliasghar

2016-01-01

Harvesting of the greater saphenous vein is almost an inevitable part of coronary artery bypass grafting (CABG) operations, and it is done by two main techniques, i.e., conventional or open vein harvesting (OVH) and the minimally-invasive endoscopic vein harvesting (EVH). This study aimed to compare these two techniques in off-pump CABG procedures with respect to clinical and pathological outcomes. This cohort study was conducted on CABG candidates during a one-year period from October 2013 through September 2014 in the Department of Cardiac Surgery at Mashhad University of Medical Sciences. Eighty-seven patients voluntarily underwent EVH, and another 86 patients matched for age, gender, and other cardiovascular risk factors were selected for OVH. They were followed up for six weeks, and the main outcome measures were infections of the wound, pain, duration of hospital stay, and the costs of hospitalization. Paired sample t-test, independent t-test, or their non-parametric equivalents and the chi-squared test were used by SPSS version 17.0 for data analysis. The mean duration of time for vein harvesting was shorter in the EVH group (p < 0.001), and the pain score was lower (p = 0.04). No infections occurred at the site of the wound. The length of hospital stay was not significantly different for the two groups (OVH versus EVH: 8.5 ± 3.3 versus 8.4 ± 3.2 days; p-value: 0.08). Hospitalization costs were significantly higher in the EVH group (OVH versus EVH: 5.8 ± 4.7 versus 7.3 ± 2.0 million Tomman; p-value: 0.008), yet no difference was diagnosed with respect to endothelial damage in the vein grafts harvested by the EVH and OVH techniques. EVH is considered as a minimally invasive and safe vein harvesting technique in our Center, and it can reduce the harvesting time and post-operative pain. In addition, its efficiency was similar to that of OVH.

Piezoelectric energy harvesting

Energy Technology Data Exchange (ETDEWEB)

Howells, Christopher A [Power Technology Branch, US Army, CERDEC, C2D, Ft. Belvoir, VA 22060-5816 (United States)

2009-07-15

Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed. (author)

Effect of garment design on piezoelectricity harvesting from joint movement

International Nuclear Information System (INIS)

Yang, Jin-Hee; Cho, Hyun-Seung; Park, Seon-Hyung; Song, Seung-Hwan; Yun, Kwang-Seok; Lee, Joo Hyeon

2016-01-01

The harvesting of piezoelectricity through the human body involves the conversion of mechanical energy, mostly generated by the repeated movements of the body, to electrical energy, irrespective of the time and location. In this research, it was expected that the garment design would play an important role in increasing the efficiency of piezoelectricity scavenged in a garment because the mechanical deformation imposed on the energy harvester could increase through an optimal design configuration for the garment parts supporting a piezoelectricity harvester. With this expectation, this research aimed to analyze the effect of the clothing factors, and that of human factors on the efficiency of piezoelectricity harvesting through clothing in joint movements. These analyses resulted in that the efficiency of the piezoelectricity harvesting was affected from both two clothing factors, tightness level depending upon the property of the textile material and design configuration of the garment part supporting the piezoelectricity harvesting. Among the three proposed designs of the garment part supporting the piezoelectricity harvesting, ‘reinforced 3D module design,’ which maximized the value of radius in the piezoelectricity harvester, showed the highest efficiency across all areas of the joints in the human body. The two human factors, frequency of movement and body part, affected the efficiency of the piezoelectricity harvesting as well. (paper)

Modeling the Technological Process for Harvesting of Agricultural Produce

Science.gov (United States)

Shepelev, S. D.; Shepelev, V. D.; Almetova, Z. V.; Shepeleva, N. P.; Cheskidov, M. V.

2018-01-01

The efficiency and the parameters of harvesting as a technological process being substantiated make it possible to reduce the cost of production and increase the profit of enterprises. To increase the efficiency of combine harvesters when the level of technical equipment declines is possible due to their efficient operating modes within daily and every season. Therefore, the correlation between the operational daily time and the seasonal load of combine harvesters is found, with the increase in the seasonal load causing the prolonged duration of operational daily time for harvesters being determined. To increase the efficient time of the seasonal load is possible due to a reasonable ratio of crop varieties according to their ripening periods, the necessary quantity of machines thereby to be reduced up to 40%. By timing and field testing the operational factor of the useful shift time of combine harvesters and the efficient modes of operating machines are defined, with the alternatives for improving the technical readiness of combine harvesters being identified.

Managing harvest and habitat as integrated components

Science.gov (United States)

Osnas, Erik; Runge, Michael C.; Mattsson, Brady J.; Austin, Jane E.; Boomer, G. S.; Clark, R. G.; Devers, P.; Eadie, J. M.; Lonsdorf, E. V.; Tavernia, Brian G.

2014-01-01

In 2007, several important initiatives in the North American waterfowl management community called for an integrated approach to habitat and harvest management. The essence of the call for integration is that harvest and habitat management affect the same resources, yet exist as separate endeavours with very different regulatory contexts. A common modelling framework could help these management streams to better understand their mutual effects. Particularly, how does successful habitat management increase harvest potential? Also, how do regional habitat programmes and large-scale harvest strategies affect continental population sizes (a metric used to express habitat goals)? In the ensuing five years, several projects took on different aspects of these challenges. While all of these projects are still on-going, and are not yet sufficiently developed to produce guidance for management decisions, they have been influential in expanding the dialogue and producing some important emerging lessons. The first lesson has been that one of the more difficult aspects of integration is not the integration across decision contexts, but the integration across spatial and temporal scales. Habitat management occurs at local and regional scales. Harvest management decisions are made at a continental scale. How do these actions, taken at different scales, combine to influence waterfowl population dynamics at all scales? The second lesson has been that consideration of the interface of habitat and harvest management can generate important insights into the objectives underlying the decision context. Often the objectives are very complex and trade-off against one another. The third lesson follows from the second – if an understanding of the fundamental objectives is paramount, there is no escaping the need for a better understanding of human dimensions, specifically the desires of hunters and nonhunters and the role they play in conservation. In the end, the compelling question is

Harvesting Information from Heterogeneous Sources

DEFF Research Database (Denmark)

Qureshi, Pir Abdul Rasool; Memon, Nasrullah; Wiil, Uffe Kock

2011-01-01

The abundance of information regarding any topic makes the Internet a very good resource. Even though searching the Internet is very easy, what remains difficult is to automate the process of information extraction from the available online information due to the lack of structure and the diversi...... with performance of our tool with respect to each format. Finally, the different potential applications of the proposed tool are discussed with special emphasis on open source intelligence....... in the sharing methods. Most of the times, information is stored in different proprietary formats, complying with different standards and protocols which makes tasks like data mining and information harvesting very difficult. In this paper, an information harvesting tool (heteroHarvest) is presented...... with objectives to address these problems by filtering the useful information and then normalizing the information in a singular non hypertext format. We also discuss state of the art tools along with the shortcomings and present the results of an analysis carried out over different heterogeneous formats along...

Passively-switched energy harvester for increased operational range

International Nuclear Information System (INIS)

Liu, Tian; Livermore, Carol; Pierre, Ryan St

2014-01-01

This paper presents modeling and experimental validation of a new type of vibrational energy harvester that passively switches between two dynamical modes of operation to expand the range of driving frequencies and accelerations over which the harvester effectively extracts power. In both modes, a driving beam with a low resonant frequency couples into ambient vibrations and transfers their energy to a generating beam that has a higher resonant frequency. The generating beam converts the mechanical power into electrical power. In coupled-motion mode, the driving beam bounces off the generating beam. In plucked mode, the driving beam deflects the generating beam until the driving beam passes from above the generating beam to below it or vice versa. Analytical system models are implemented numerically in the time domain for driving frequencies of 3 Hz to 27 Hz and accelerations from 0.1 g to 2.6 g, and both system dynamics and output power are predicted. A corresponding switched-dynamics harvester is tested experimentally, and its voltage, power, and dynamics are recorded. In both models and experiments, coupled-motion harvesting is observed at lower accelerations, whereas plucked harvesting and/or mixed mode harvesting are observed at higher accelerations. As expected, plucked harvesting outputs greater power than coupled-motion harvesting in both simulations and experiments. The predicted (1.8 mW) and measured (1.56 mW) maximum average power levels are similar under measured conditions at 0.5 g. When the system switches to dynamics that are characteristic of higher frequencies, the difference between predicted and measured power levels is more pronounced due to non-ideal mechanical interaction between the beams’ tips. Despite the beams’ non-ideal interactions, switched-dynamics operation increases the harvester’s operating range. (paper)

Applying new technologies to transform blueberry harvesting

Science.gov (United States)

The growth of the blueberry industry in the past three decades has been remarkable. However, labor shortage for hand harvesting, increasingly high labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study ...

PRESTO: online calculation of carbon in harvested wood products

Science.gov (United States)

Coeli M. Hoover; Sarah J. Beukema; Donald C.E. Robinson; Katherine M. Kellock; Diana A. Abraham

2014-01-01

Carbon stored in harvested wood products is recognized under international carbon accounting protocols, and some crediting systems may permit the inclusion of harvested wood products when calculating carbon sequestration. For managers and landowners, however, estimating carbon stored in harvested wood products may be difficult. PRESTO (PRoduct EStimation Tool Online)...

Energy Harvesting Using Screen Printed PZT on Silicon

DEFF Research Database (Denmark)

Lei, Anders

and a multiplication factor equal to or less than 1. The available power is proportional to the force acting on the cantilever squared and the inverse of the viscous damping coefficient. The latest fabricated batch of harvesters produced in average 34.5 µW of RMS power over a resistive load of 50 k? with an RMS...... acceleration of 0.5g at 511 Hz. The best performing devices under similar conditions produced 44.9 µW at 543 Hz. Compared to other state of the art miniaturised vibration energy harvesters, the normalised power density for the harvesters fabricated in this work is 3.5 times higher than the next best harvester....

A Novel Ropes-DrivenWideband Piezoelectric Vibration Energy Harvester

Directory of Open Access Journals (Sweden)

Jinhui Zhang

2016-12-01

Full Text Available This paper presents a novel piezoelectric vibration energy harvester (PVEH in which a high-frequency generating beam (HFGB is driven by an array of low-frequency driving beams (LFDBs using ropes. Two mechanisms based on frequency upconversion and multimodal harvesting work together to broaden the frequency bandwidth of the proposed vibration energy harvester (VEH. The experimental results show that the output power of generating beam (GB remains unchanged with the increasing number of driving beams (DBs, compared with the traditional arrays of beams vibration energy harvester (AB-VEH, and the output power and bandwidth behavior can be adjusted by parameters such as acceleration, rope margin, and stiffness of LFDBs, which shows the potential to achieve unlimited wideband vibration energy-harvesting for a variable environment.

Flexible electret energy harvesters with parylene electret on PDMS substrates

International Nuclear Information System (INIS)

Chiu, Yi; Wu, Shih-Hsien

2013-01-01

Currently, most vibrational energy harvesters have rigid and resonant structures to harvest energy from periodic motions in specific directions. However, in some situations the motion is random and aperiodic; or the targeted energy source is the strain energy in deformation, rather than the kinetic energy in vibration. Therefore we propose and demonstrate a PDMS-based flexible energy harvester with parylene-C electret that can be attached to any deformable surfaces to harvest the stain energy caused by external deformation. The proposed flexible harvester was fabricated and characterized. The measured power at 20 Hz is 0.18 μW and 82 nW in the compression and bending modes, respectively. Such a harvester has the potential for wearable and implantable electronics applications

Piezoelectric energy harvester under parquet floor

Science.gov (United States)

Bischur, E.; Schwesinger, N.

2011-03-01

The design, fabrication and testing of piezoelectric energy harvesting modules for floors is described. These modules are used beneath a parquet floor to harvest the energy of people walking over it. The harvesting modules consist of monoaxial stretched PVDF-foils. Multilayer modules are built up as roller-type capacitors. The fabrication process of the harvesting modules is simple and very suitable for mass production. Due to the use of organic polymers, the modules are characterized by a great flexibility and the possibility to create them in almost any geometrical size. The energy yield was determined depending on the dynamic loading force, the thickness of piezoelectric active material, the size of the piezoelectric modules, their alignment in the walking direction and their position on the floor. An increase of the energy yield at higher loading forces and higher thicknesses of the modules was observed. It was possible to generate up to 2.1mWs of electric energy with dynamic loads of 70kg using a specific module design. Furthermore a test floor was assembled to determine the influence of the size, alignment and position of the modules on the energy yield.

Design guidelines of triboelectric nanogenerator for water wave energy harvesters

KAUST Repository

Ahmed, Abdelsalam; Hassan, Islam; Jiang, Tao; Youssef, Khalid; Liu, Lian; Hedaya, Mohammad; Yazid, Taher Abu; Zu, Jean; Wang, Zhong Lin

2017-01-01

Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester's overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

Design guidelines of triboelectric nanogenerator for water wave energy harvesters.

Science.gov (United States)

Ahmed, Abdelsalam; Hassan, Islam; Jiang, Tao; Youssef, Khalid; Liu, Lian; Hedaya, Mohammad; Yazid, Taher Abu; Zu, Jean; Wang, Zhong Lin

2017-05-05

Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester's overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

Determinants of rainwater harvesting technology (RWHT) adoption ...

African Journals Online (AJOL)

2014-11-26

Nov 26, 2014 ... study evaluated the determinants of farmers' decisions to adopt rainwater harvesting technology ... adoption of RWHT in the study area. ... In South Africa, agriculture involves large numbers of ... Study area and data collection ..... study in rainwater harvesting: A 2011 perspective. ... Kluwer Academic.

Harvesting microalgae by bio-flocculation and autoflocculation

NARCIS (Netherlands)

Salim, S.

2013-01-01

Harvesting in commercial microalgae production plants is generally done by centrifugation, but this requires upto about 50% of the total energy gained from the microalgae. The energy needed for harvesting can be reduced considerably by pre-concentration of the microalgae prior to further dewatering.

Effects of pre-harvest methyl jasmonate treatment on post-harvest ...

African Journals Online (AJOL)

... quality and bioactive compounds of three different Japanese plums under storage conditions. Materials and Methods: The effects of pre-harvest methyl jasmonate treatment (MeJA) on weight loss, color characteristics (L*, C* and h°), firmness, soluble solids content (SSC), titratable acidity (TA), total phenolics (TP) and total ...

Distribution and derivation of white-winged dove harvests in Texas

KAUST Repository

Collier, Bret A.; Skow, Kevin L.; Kremer, Shelly R.; Mason, Corey D.; Snelgrove, Robert T.; Calhoun, Kirby W.

2012-01-01

Band recoveries provide requisite data for evaluating the spatial distribution of harvest relative to the distribution of breeding stocks for a wide variety of migratory species. We used direct and indirect band-recovery data to evaluate the distribution and derivation of harvest of white-winged doves (Zenaida asiatica) banded before hunting season in 3 distinct strata in Texas, USA, during 2007-2010. We banded 60,742 white-winged doves during 2007-2010, and based on 2,458 harvest recoveries, the majority (>95%) of white-winged dove harvest occurred during the first 2 months of the hunting season (Sep-Oct). Juvenile white-winged doves represented a greater percentage of the direct recoveries than adults across all strata (north = 80%, central = 69%, south = 82%) and the majority of direct band recoveries (north = 75%, central = 90%, south = 78%) occurred within the original banding strata. Age-specific weighting factors and harvest derivation indicated that both juvenile and adult harvest were highest within the strata of original banding. Harvest distribution data corrected for band-reporting rates indicated high fidelity of white-winged doves to specific geographic strata, with little interplay between strata. Our results suggest that population vital-rate estimates for survival and harvest for use in future Adaptive Harvest Management should focus on stock-specific levels. © 2012 The Wildlife Society.

Distribution and derivation of white-winged dove harvests in Texas

KAUST Repository

Collier, Bret A.

2012-04-25

Band recoveries provide requisite data for evaluating the spatial distribution of harvest relative to the distribution of breeding stocks for a wide variety of migratory species. We used direct and indirect band-recovery data to evaluate the distribution and derivation of harvest of white-winged doves (Zenaida asiatica) banded before hunting season in 3 distinct strata in Texas, USA, during 2007-2010. We banded 60,742 white-winged doves during 2007-2010, and based on 2,458 harvest recoveries, the majority (>95%) of white-winged dove harvest occurred during the first 2 months of the hunting season (Sep-Oct). Juvenile white-winged doves represented a greater percentage of the direct recoveries than adults across all strata (north = 80%, central = 69%, south = 82%) and the majority of direct band recoveries (north = 75%, central = 90%, south = 78%) occurred within the original banding strata. Age-specific weighting factors and harvest derivation indicated that both juvenile and adult harvest were highest within the strata of original banding. Harvest distribution data corrected for band-reporting rates indicated high fidelity of white-winged doves to specific geographic strata, with little interplay between strata. Our results suggest that population vital-rate estimates for survival and harvest for use in future Adaptive Harvest Management should focus on stock-specific levels. © 2012 The Wildlife Society.

Preliminary design of a coffee harvester

Directory of Open Access Journals (Sweden)

Raphael Magalhães Gomes Moreira

2016-10-01

Full Text Available Design of an agricultural machine is a highly complex process due to interactions between the operator, machine, and environment. Mountain coffee plantations constitute an economic sector that requires huge investments for the development of agricultural machinery to improve the harvesting and post-harvesting processes and to overcome the scarcity of work forces in the fields. The aim of this study was to develop a preliminary design for a virtual prototype of a coffee fruit harvester. In this study, a project methodology was applied and adapted for the development of the following steps: project planning, informational design, conceptual design, and preliminary design. The construction of a morphological matrix made it possible to obtain a list of different mechanisms with specific functions. The union between these mechanisms resulted in variants, which were weighed to attribute scores for each selected criterion. From each designated proposal, two variants with the best scores were selected and this permitted the preparation of the preliminary design of both variants. The archetype was divided in two parts, namely the hydraulically articulated arms and the harvesting system that consisted of the vibration mechanism and the detachment mechanism. The proposed innovation involves the use of parallel rods, which were fixed in a plane and rectangular metal sheet. In this step, dimensions including a maximum length of 4.7 m, a minimum length of 3.3 m, and a total height of 2.15 m were identified based on the functioning of the harvester in relation to the coupling point of the tractor.

CLIMATE CHANGE AND ORIENTAL SPRUCE (PICEA ORIENTALIS ECOSYSTEMS IN EASTERN BLACKSEA REGION OF TURKEY

Directory of Open Access Journals (Sweden)

Aydın Tüfekçioğlu

2008-04-01

Full Text Available Climate change has been getting more attention from scientific community recently. Eastern Black Sea Region of Turkey will get significant influences from the climate change according to regional climate model (RegCM3. Oriental spruce (Picea orientalis L. is an important tree species of Turkey and it only grows in the Eastern Black Sea Region of Turkey. With the increase in global warming, spruce forests started to have serious bark beetle problems. More than 200 000 trees died in the region recently due to bark beetle attack. We used existing literature related to oriental spruce and future climate of the region and field observations done in the different times to assess current status of the spruce stands. Future climate of the region has been predicted using RegCM3 regional climate model. Climate change could significantly influence distribution, diversity, structure and stability of the oriental spruce ecosystems. According to RegCM3 regional climate model, the temperatures will increase 2-4 °C in the region in the next century. Future climate scenarios predict 200-300 mm increases in precipitation in the eastern part of the region while the western part won't have any increase in precipitation in the next century. Temperature increases in the western part of the region can cause more stress on spruce trees and would probably increase bark beetle attacks. Also, fire could become an important threat in the western part of the region. It is possible to observe 400-800 m upward shift in the spruce belt in the western part. Treeline of spruce stands would probably move upward both in western and eastern part of the North-eastern Blacksea Region.

HYBRID POWER HARVESTER USING ENGINE SOURCE

OpenAIRE

Meeran Mydeen, A.Ahmed; Inasu, Kelwin; Venkatesh, M.; Suthesh, C.

2017-01-01

In mainly we present a compact, multisource and battery-free energy harvesting from engine source. This battery free generator captures energy from its environment transient thermal gradients as a main source, and vibration as a secondary source allowing early biasing of the generator and stores this energy in ultra-capacitors .In this way, this multi-source architecture benefits from the synergy between energy scavenging and harvesting.

Heading Estimation of Robot Combine Harvesters during Turning Maneuveres

Directory of Open Access Journals (Sweden)

Md Mostafizar Rahman

2018-05-01

Full Text Available Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

Forest soil carbon is threatened by intensive biomass harvesting.

Science.gov (United States)

Achat, David L; Fortin, Mathieu; Landmann, Guy; Ringeval, Bruno; Augusto, Laurent

2015-11-04

Forests play a key role in the carbon cycle as they store huge quantities of organic carbon, most of which is stored in soils, with a smaller part being held in vegetation. While the carbon storage capacity of forests is influenced by forestry, the long-term impacts of forest managers' decisions on soil organic carbon (SOC) remain unclear. Using a meta-analysis approach, we showed that conventional biomass harvests preserved the SOC of forests, unlike intensive harvests where logging residues were harvested to produce fuelwood. Conventional harvests caused a decrease in carbon storage in the forest floor, but when the whole soil profile was taken into account, we found that this loss in the forest floor was compensated by an accumulation of SOC in deeper soil layers. Conversely, we found that intensive harvests led to SOC losses in all layers of forest soils. We assessed the potential impact of intensive harvests on the carbon budget, focusing on managed European forests. Estimated carbon losses from forest soils suggested that intensive biomass harvests could constitute an important source of carbon transfer from forests to the atmosphere (142-497 Tg-C), partly neutralizing the role of a carbon sink played by forest soils.

Compact passively self-tuning energy harvesting for rotating applications

International Nuclear Information System (INIS)

Gu, Lei; Livermore, Carol

2012-01-01

This paper presents a compact, passive, self-tuning energy harvester for rotating applications. The harvester rotates in the vertical plane and is comprised of two beams: a relatively rigid piezoelectric generating beam and a narrow, flexible driving beam with a tip mass mounted at the end. The mass impacts the generating beam repeatedly under the influence of gravity to drive generation. Centrifugal force from the rotation modifies the resonant frequency of the flexible driving beam and the frequency response of the harvester. An analytical model that captures the harvester system's resonant frequency as a function of rotational speed is used to guide the detailed design. With an optimized design, the resonant frequency of the harvester substantially matches the frequency of the rotation over a wide frequency range from 4 to 16.2 Hz. A prototype of the passive self-tuning energy harvester using a lead zirconate titanate generating beam achieved a power density of 30.8 µW cm −3 and a more than 11 Hz bandwidth, which is much larger than the 0.8 Hz bandwidth calculated semi-empirically for a similar but untuned harvester. Passive tuning was also demonstrated using the more robust and reliable but less efficient polymer polyvinylidene fluoride for the generating beam

Restoration of harvested peatlands

International Nuclear Information System (INIS)

Saarmets, Tiit

1999-01-01

A short analysis of the main topics of the IPS Symposium Peatland Restoration and Reclamation, Duluth, Minnesota, USA, 1998 is given. It has been single-mindedly recommended in Estonia so far that harvested peatland surfaces should be levelled and outflows shut. But following these recommendations will lead to an unfounded formation of marshy areas with a very low growth of plants. The reclamation of harvested peatlands for agricultural purposes is expensive and there is no commercial need for agricultural land in today's Estonia now. In the author's opinion the foreflows and intermediate ditches should be left open which would favour the growth of the brushwood to grow later into the forest of commercial value. (author)

Magnetostrictive energy generator for harvesting the rotation of human knee joint

Directory of Open Access Journals (Sweden)

Baiping Yan

2018-05-01

Full Text Available This paper presents the design and fabrication of a rotary-impact magnetostrictive energy generator, used to harvest the rotation of human knee joint. The harvester consists of twelve movable Terfenol-D rods, surrounded by the picked up coils respectively, and alternate permanent magnet (PM array sandwiched in each part of the shell. Rotational electromagnetic power generating effect and impacted magnetostrictive power generating effect are designed in the harvester. Modeling and simulation are used to validate the concept. Then, magnetic field and leakage of the harvester are analyzed, electromagnetic force in the harvester is simulated. A prototype of harvester is fabricated, and subjected to the experimental characterization. It can be concluded that huge induced voltage generated in the short-time impact situation and that induced voltage in the harvester can reach up to 60-80 volts at 0.91Hz low frequency rotation. Also, the presented harvester has good harvesting effects at low frequency human walking and periodic swing crus situation, which are suitable to be used for future researches of wearable knee joint applications.

Magnetostrictive energy generator for harvesting the rotation of human knee joint

Science.gov (United States)

Yan, Baiping; Zhang, Chengming; Li, Liyi

2018-05-01

This paper presents the design and fabrication of a rotary-impact magnetostrictive energy generator, used to harvest the rotation of human knee joint. The harvester consists of twelve movable Terfenol-D rods, surrounded by the picked up coils respectively, and alternate permanent magnet (PM) array sandwiched in each part of the shell. Rotational electromagnetic power generating effect and impacted magnetostrictive power generating effect are designed in the harvester. Modeling and simulation are used to validate the concept. Then, magnetic field and leakage of the harvester are analyzed, electromagnetic force in the harvester is simulated. A prototype of harvester is fabricated, and subjected to the experimental characterization. It can be concluded that huge induced voltage generated in the short-time impact situation and that induced voltage in the harvester can reach up to 60-80 volts at 0.91Hz low frequency rotation. Also, the presented harvester has good harvesting effects at low frequency human walking and periodic swing crus situation, which are suitable to be used for future researches of wearable knee joint applications.

Adaptive learning algorithms for vibration energy harvesting

International Nuclear Information System (INIS)

Ward, John K; Behrens, Sam

2008-01-01

By scavenging energy from their local environment, portable electronic devices such as MEMS devices, mobile phones, radios and wireless sensors can achieve greater run times with potentially lower weight. Vibration energy harvesting is one such approach where energy from parasitic vibrations can be converted into electrical energy through the use of piezoelectric and electromagnetic transducers. Parasitic vibrations come from a range of sources such as human movement, wind, seismic forces and traffic. Existing approaches to vibration energy harvesting typically utilize a rectifier circuit, which is tuned to the resonant frequency of the harvesting structure and the dominant frequency of vibration. We have developed a novel approach to vibration energy harvesting, including adaptation to non-periodic vibrations so as to extract the maximum amount of vibration energy available. Experimental results of an experimental apparatus using an off-the-shelf transducer (i.e. speaker coil) show mechanical vibration to electrical energy conversion efficiencies of 27–34%

Piezoelectric energy harvesting from flow-induced vibration

International Nuclear Information System (INIS)

Wang, D-A; Ko, H-H

2010-01-01

A new piezoelectric energy harvester for harnessing energy from flow-induced vibration is developed. It converts flow energy into electrical energy by piezoelectric conversion with oscillation of a piezoelectric film. A finite element model is developed in order to estimate the generated voltage of the piezoelectric laminate subjected to a distributed load. Prototypes of the energy harvester are fabricated and tested. Experimental results show that an open circuit output voltage of 2.2 V pp and an instantaneous output power of 0.2 µW are generated when the excitation pressure oscillates with an amplitude of 1.196 kPa and a frequency of about 26 Hz. The solution of the generated voltage based on the finite element model agrees well with the experiments. Based on the finite element model, the effects of the piezoelectric film dimensions, the fluid pressure applied to the harvester and types of piezoelectric layer on the output voltage of the harvester can be investigated.

Evaluation of mechanical harvesting in viticulture

Directory of Open Access Journals (Sweden)

Pavel Zemánek

2005-01-01

Full Text Available Harvesting by mashine was in CZ tested at bygones century (70th. Tests rekord were bad (high share of leaf, detritus of concrete column, losses of berries.Lasting fall of worker in agriculture and vehement growth floricultural surfaces – vineyard (somewhere 19.000 hectare, requires complex rationalization and mechanization of all works stages which needs needlework. Harvisting in viniculture needs perhaps 30% of all working time (200–250 o‘clock on 1 hectare. Incidence thereof begun most of bigger producers in our country with mechanical harvisting. Technical performance of this machines turn up. There are not available data about costs and their work quality.The benefit deal with classification of mechanical harvesting (juice adhering, berries lost, damage of vineyard transaction by the help of semi-trailer and self-propelled harvesters.

A Shoe-Embedded Piezoelectric Energy Harvester for Wearable Sensors

Directory of Open Access Journals (Sweden)

Jingjing Zhao

2014-07-01

Full Text Available Harvesting mechanical energy from human motion is an attractive approach for obtaining clean and sustainable electric energy to power wearable sensors, which are widely used for health monitoring, activity recognition, gait analysis and so on. This paper studies a piezoelectric energy harvester for the parasitic mechanical energy in shoes originated from human motion. The harvester is based on a specially designed sandwich structure with a thin thickness, which makes it readily compatible with a shoe. Besides, consideration is given to both high performance and excellent durability. The harvester provides an average output power of 1 mW during a walk at a frequency of roughly 1 Hz. Furthermore, a direct current (DC power supply is built through integrating the harvester with a power management circuit. The DC power supply is tested by driving a simulated wireless transmitter, which can be activated once every 2–3 steps with an active period lasting 5 ms and a mean power of 50 mW. This work demonstrates the feasibility of applying piezoelectric energy harvesters to power wearable sensors.

The role of energy losses in photosynthetic light harvesting

Science.gov (United States)

Krüger, T. P. J.; van Grondelle, R.

2017-07-01

Photosynthesis operates at the bottom of the food chain to convert the energy of light into carbohydrates at a remarkable global rate of about 130 TW. Nonetheless, the overall photosynthetic process has a conversion efficiency of a few percent at best, significantly less than bottom-up photovoltaic cells. The primary photosynthetic steps, consisting of light harvesting and charge separation, are often presented as having near-unity quantum efficiency but this holds only true under ideal conditions. In this review, we discuss the importance of energy loss mechanisms to establish robustness in photosynthetic light harvesting. Thermal energy dissipation of light-harvesting complexes (LHCs) in different environments is investigated and the relationships and contrasts between concentration quenching of high pigment concentrations, photoprotection (non-photochemical quenching), quenching due to protein aggregation, and fluorescence blinking are discussed. The role of charge-transfer states in light harvesting and energy dissipation is highlighted and the importance of controlled protein structural disorder to switch the light-harvesting antennae between effective light harvesters and efficient energy quenchers is underscored. The main LHC of plants, LHCII, is used as a prime example.

Energy harvesting from low frequency applications using piezoelectric materials

International Nuclear Information System (INIS)

Li, Huidong; Tian, Chuan; Deng, Z. Daniel

2014-01-01

In an effort to eliminate the replacement of the batteries of electronic devices that are difficult or impractical to service once deployed, harvesting energy from mechanical vibrations or impacts using piezoelectric materials has been researched over the last several decades. However, a majority of these applications have very low input frequencies. This presents a challenge for the researchers to optimize the energy output of piezoelectric energy harvesters, due to the relatively high elastic moduli of piezoelectric materials used to date. This paper reviews the current state of research on piezoelectric energy harvesting devices for low frequency (0–100 Hz) applications and the methods that have been developed to improve the power outputs of the piezoelectric energy harvesters. Various key aspects that contribute to the overall performance of a piezoelectric energy harvester are discussed, including geometries of the piezoelectric element, types of piezoelectric material used, techniques employed to match the resonance frequency of the piezoelectric element to input frequency of the host structure, and electronic circuits specifically designed for energy harvesters

Differential fat harvesting

Directory of Open Access Journals (Sweden)

Sebastian Torres Farr

2014-12-01

Full Text Available Aim: Volume replacement with fillers is regularly performed with the use of diverse volumetric materials to correct different structures around the face, depending on the volume enhancement required and the thickness of the soft tissue envelope. Differential fat harvesting and posterior grafting is performed to place the correct fat parcel size for each target area, expanding the potential applications of fat. Methods: Sixty patients consecutively recruited on a first come basis undergone a facial fat grafting procedure, in private practice setting between March 2012 and October 2013. Fat grafting quantity and quality was predicted for each case. Differential harvesting was performed, with 2 fat parcels size. Processing was performed through washing. Fat infiltration was carried out through small cannulas or needles depending on the treated area. Outcomes were analysed both by the physicians and the patients at 7 days, 1 month, 3 months and 6 months through a perceived satisfaction questionnaire. Parameters considered were downtime or discomfort, skin benefits, volume restoration, reabsorption rate estimated and overall improvement. Results: Full facial differential fat grafting procedure lasted an average of 1.5-2.5 h. Average downtime was 3-4 days. Follow-up was performed to a minimum of 6 months. Both patient and physician overall satisfaction rates were mostly excellent. Adverse events like lumps or irregularities were not encountered. Conclusion: Differential fat harvesting and posterior grafting is a valid alternative, to expand the repertoire of fat use, allow a more homogeneous effect, reduce the potential complications, speed up the process, improve graft survival, and to enhance overall aesthetic outcome.

Towards Complete Coverage in Focused Web Harvesting

NARCIS (Netherlands)

Khelghati, Mohammadreza; Hiemstra, Djoerd; van Keulen, Maurice

2015-01-01

With the goal of harvesting all information about a given entity, in this paper, we try to harvest all matching documents for a given query submitted on a search engine. The objective is to retrieve all information about for instance "Michael Jackson", "Islamic State", or "FC Barcelona" from indexed

50 CFR 300.132 - Lobster harvest limitations.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Lobster harvest limitations. 300.132... FISHERIES REGULATIONS Vessels of the United States Fishing in Colombian Treaty Waters § 300.132 Lobster harvest limitations. (a) Berried lobsters. A berried (egg-bearing) lobster in treaty waters may not be...

Potential Ambient Energy-Harvesting Sources and Techniques

Science.gov (United States)

Yildiz, Faruk

2009-01-01

Ambient energy harvesting is also known as energy scavenging or power harvesting, and it is the process where energy is obtained from the environment. A variety of techniques are available for energy scavenging, including solar and wind powers, ocean waves, piezoelectricity, thermoelectricity, and physical motions. For example, some systems…

Modelling piezoelectric energy harvesting potential in an educational building

International Nuclear Information System (INIS)

Li, Xiaofeng; Strezov, Vladimir

2014-01-01

Highlights: • Energy harvesting potential of commercialized piezoelectric tiles is analyzed. • The parameters which will affect the energy harvesting efficiency are determined. • The potential could cover 0.5% of the total energy usage of the library building. • A simplified evaluation indicator is proposed to test the considered paving area. - Abstract: In this paper, potential application of a commercial piezoelectric energy harvester in a central hub building at Macquarie University in Sydney, Australia is examined and discussed. Optimization of the piezoelectric tile deployment is presented according to the frequency of pedestrian mobility and a model is developed where 3.1% of the total floor area with the highest pedestrian mobility is paved with piezoelectric tiles. The modelling results indicate that the total annual energy harvesting potential for the proposed optimized tile pavement model is estimated at 1.1 MW h/year. This potential energy generation may be further increased to 9.9 MW h/year with a possible improvement in piezoelectric energy conversion efficiency integrated into the system. This energy harvesting potential would be sufficient to meet close to 0.5% of the annual energy needs of the building. The study confirms that locating high traffic areas is critical for optimization of the energy harvesting efficiency, as well as the orientation of the tile pavement significantly affects the total amount of the harvested energy. A Density Flow evaluation is recommended in this study to qualitatively evaluate the piezoelectric power harvesting potential of the considered area based on the number of pedestrian crossings per unit time

Mechanised harvesting of short-rotation coppices

OpenAIRE

Vanbeveren, Stefan P.P.; Spinelli, Raffaele; Eisenbies, Mark; Schweier, Janine; Mola-Yudego, Blas; Magagnotti, Natascia; Acuna, Mauricio; Dimitriou, Ioannis; Ceulemans, Reinhart

2017-01-01

Abstract: Short-rotation coppice (SRC) is an important source of woody biomass for bioenergy. Despite the research carried out on several aspects of SRC production, many uncertainties create barriers to farmers establishing SRC plantations. One of the key economic sources of uncertainty is harvesting methods and costs; more specifically, the performance of contemporary machine methods is reviewed. We collected data from 25 literature references, describing 166 field trials. Three harvesting s...

Vibration produced by hand-held olive electrical harvesters

Directory of Open Access Journals (Sweden)

Emanuele Cerruto

2012-09-01

Full Text Available The paper reports the results of some laboratory and field tests aimed at assessing the acceleration levels transmitted to the hand-arm system by electric portable harvesters for olive. Four harvesting heads, different for shape and kinematic system, and five bars, different for diameter, length and material (aluminium and carbon fibre, were used in assembling eleven harvesters. The vibrations were measured in two points, next to the handgrips. The laboratory tests allowed the evaluation of the acceleration levels in standard controlled conditions, while the field tests allowed the assessing of the effects of the tree canopy with respect to the no load running. The laboratory tests showed that in reducing the vibration level plays a major role the kinematic system of the harvesting head and then the bar material. The classical flap-type harvester produced accelerations of around 20 m/s2, while by using a harvesting head with two parts in opposite movement, the accelerations were lowered to about 6 m/s2. The use of carbon fibres for the bars, besides the reduction in weight, produced also a reduction in acceleration (from 21 to 16 m/s2. The field tests proved that the tree canopy had a negative effect on the vibrations transmitted to the hand-arm system, especially when the aluminium bar of small diameter was used.

Study on Pyroelectric Harvesters Integrating Solar Radiation with Wind Power

Directory of Open Access Journals (Sweden)

Chun-Ching Hsiao

2015-07-01

Full Text Available Pyroelectric harvesters use temperature fluctuations to generate electrical outputs. Solar radiation and waste heat are rich energy sources that can be harvested. Pyroelectric energy converters offer a novel and direct energy-conversion technology by transforming time-dependent temperatures directly into electricity. Moreover, the great challenge for pyroelectric energy harvesting lies in finding promising temperature variations or an alternating thermal loading in real situations. Hence, in this article, a novel pyroelectric harvester integrating solar radiation with wind power by the pyroelectric effect is proposed. Solar radiation is a thermal source, and wind is a dynamic potential. A disk generator is used for harvesting wind power. A mechanism is considered to convert the rotary energy of the disk generator to drive a shutter for generating temperature variations in pyroelectric cells using a planetary gear system. The optimal period of the pyroelectric cells is 35 s to harvest the stored energy, about 70 μJ, while the rotary velocity of the disk generator is about 31 RPM and the wind speed is about 1 m/s. In this state, the stored energy acquired from the pyroelectric harvester is about 75% more than that from the disk generator. Although the generated energy of the proposed pyroelectric harvester is less than that of the disk generator, the pyroelectric harvester plays a complementary role when the disk generator is inactive in situations of low wind speed.

Machinery management data for willow harvest with a bio-baler

Energy Technology Data Exchange (ETDEWEB)

Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada); Hebert, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Robert, F.S. [Laval Univ., Quebec City, PQ (Canada). Sols et environnement

2010-07-01

Willow harvested in 2-to-3-year rotations has been touted as a reliable source of biomass. A newly designed harvester based on a round baler was developed in 2006. The third generation biobaler was evaluated in 2009 at 2 willow plantations in Quebec. The first site at Godmanchester was a three-year old regrowth with an estimated 52,000 stems/ha of large diameter willow. The biobaler with a flail cutter harvested three plots totalling 4,136 m{sup 2}. Total harvested biomass was 10.36 t DM in 42 bales. The harvest rate averaged 29 bale/h with an average bale size of 1.22 m wide by 1.30 m in diameter. Diesel fuel consumption averaged 0.81 L/bale. Measured losses averaged 11 per cent of the yield. The second site at Saint-Roch-del'Achigan was a two-year old growth with an estimated 49,000 stems/ha of large stem willow. The biobaler harvested seven plots totalling 15,740 m{sup 2}. Total harvest was 30.70 t DM in 148 bales. The first 14 bales were harvested with a saw blade header. All other bales were harvested with the flail cutter at a faster rate. Bale density averaged 129 kg DM/m{sup 3}. Fuel consumption averaged 0.72 L/bale. Losses averaged 20 per cent of the yield with the saw blade header.

Energy Harvesting Research: The Road from Single Source to Multisource.

Science.gov (United States)

Bai, Yang; Jantunen, Heli; Juuti, Jari

2018-06-07

Energy harvesting technology may be considered an ultimate solution to replace batteries and provide a long-term power supply for wireless sensor networks. Looking back into its research history, individual energy harvesters for the conversion of single energy sources into electricity are developed first, followed by hybrid counterparts designed for use with multiple energy sources. Very recently, the concept of a truly multisource energy harvester built from only a single piece of material as the energy conversion component is proposed. This review, from the aspect of materials and device configurations, explains in detail a wide scope to give an overview of energy harvesting research. It covers single-source devices including solar, thermal, kinetic and other types of energy harvesters, hybrid energy harvesting configurations for both single and multiple energy sources and single material, and multisource energy harvesters. It also includes the energy conversion principles of photovoltaic, electromagnetic, piezoelectric, triboelectric, electrostatic, electrostrictive, thermoelectric, pyroelectric, magnetostrictive, and dielectric devices. This is one of the most comprehensive reviews conducted to date, focusing on the entire energy harvesting research scene and providing a guide to seeking deeper and more specific research references and resources from every corner of the scientific community. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Derriçadora portátil na colheita total e seletiva de frutos do cafeeiro Portable harvester in the total and selective harvesting of coffee fruits

Directory of Open Access Journals (Sweden)

Cristiano Márcio Alves de Souza

2006-11-01

Full Text Available O objetivo deste trabalho foi avaliar o desempenho de derriçadoras portáteis durante a colheita seletiva e total dos frutos, em dois sistemas de colheita. Foram determinados a carga pendente da planta, a capacidade de derriça, o índice de desfolha, a eficiência de derriça, o índice de frutos verdes no produto, o nível de ruído e o consumo horário e específico de combustível. O sistema de colheita, utilizando-se duas derriçadoras portáteis, simultaneamente na mesma fileira de cafeeiros, apresentou melhor desempenho. A colheita seletiva foi muito influenciada pela porcentagem de frutos maduros e carga pendente do cafeeiro.The objective of this work was to evaluate the performance of a portable coffee harvester to mountain areas. Two procedures were tested: harvesting all fruits in only one operation, and the selective harvesting. Coffee yield, harvesting capacity, index of leaves taken during harvesting process, harvesting efficiency, noise level and fuel consumption were measured. The harvesting system with two portable harvester presented better performance than with only one machine. Selective harvesting was highly influenced by the percentage of ripen fruits and by coffee yield.

Energy Harvesting from Aerodynamic Instabilities: Current prospect and Future Trends

Science.gov (United States)

Bashir, M.; Rajendran, P.; Khan, S. A.

2018-01-01

This paper evaluates the layout and advancement of energy harvesting based on aerodynamic instabilities of an aircraft. Vibration and thermoelectric energy harvesters are substantiated as most suitable alternative low-power sources for aerospace applications. Furthermore, the facility associated with the aircraft applications in harvesting the mechanical vibrations and converting it to electric energy has fascinated the researchers. These devices are designed as an alternative to a battery-based solution especially for small aircrafts, wireless structural health monitoring for aircraft systems, and harvester plates employed in UAVs to enhance the endurance and operational flight missions. We will emphasize on various sources of energy harvesting that are designed to come from aerodynamic flow-induced vibrations, specific attention is then given at those technologies that may offer, today or in the near future, a potential benefit to reduce both the cost and emissions of the aviation industry. The advancements achieved in the energy harvesting based on aerodynamic instabilities show very good scope for many piezoelectric harvesters in the field of aerospace, specifically green aviation technology in the future.

RF power harvesting: a review on designing methodologies and applications

Science.gov (United States)

Tran, Le-Giang; Cha, Hyouk-Kyu; Park, Woo-Tae

2017-12-01

Wireless power transmission was conceptualized nearly a century ago. Certain achievements made to date have made power harvesting a reality, capable of providing alternative sources of energy. This review provides a summ ary of radio frequency (RF) power harvesting technologies in order to serve as a guide for the design of RF energy harvesting units. Since energy harvesting circuits are designed to operate with relatively small voltages and currents, they rely on state-of-the-art electrical technology for obtaining high efficiency. Thus, comprehensive analysis and discussions of various designs and their tradeoffs are included. Finally, recent applications of RF power harvesting are outlined.

Setting analyst: A practical harvest planning technique

Science.gov (United States)

Olivier R.M. Halleux; W. Dale Greene

2001-01-01

Setting Analyst is an ArcView extension that facilitates practical harvest planning for ground-based systems. By modeling the travel patterns of ground-based machines, it compares different harvesting settings based on projected average skidding distance, logging costs, and site disturbance levels. Setting Analyst uses information commonly available to consulting...

Energy harvesting autonomous sensor systems design, analysis, and practical implementation

CERN Document Server

Tan, Yen Kheng

2013-01-01

This book is the considered the first to describe sensor-oriented energy harvesting issues. Its content is derived from the author's research on the development of a truly self-autonomous and sustainable energy harvesting wireless sensor network (EH-WSN). This network harvests energy from a variety of ambient energy sources and converts it into electrical energy to power batteries. The book discusses various types of energy harvesting (EH) systems and their respective main components.

Quantification of Pla or 3, a Platanus orientalis Allergen, Grown under Different Environmental Conditions, by Sandwich ELISA.

Science.gov (United States)

Sedghy, Farnaz; Sankian, Mojtaba; Moghadam, Maliheh; Varasteh, Abdol-Reza

2016-10-01

Platanus species are widely cultured around the world and considered an important cause of allergic reactions. In the present study, we developed a sandwich ELISA to quantify Pla or 3 allergen in P. orientalis pollen extracts grown near high-traffic roads and compared it to pollen extracts collected from rural areas as control. Pollen samples were collected from three polluted and two unpolluted sites in Mashhad, northeast Iran. Recombinant Pla or 3 was expressed and used for polyclonal antibody production in rabbit. A sandwich ELISA was developed and validated to quantify Pla or 3 levels in pollen extracts from the different sites. The coefficients of variation (CVs) for the intra- and inter- day assays were less than 5 and 18%, respectively. The working range of the standard curve was between 0.1 and 25 ng/ml, with the detection limit being 0.037 ng/ml. The recovery percentage was 88-106.4% at working concentrations from 0.31 to 26.5 ng/ml. Pla or 3 levels were significantly greater in pollens grown near high-traffic roads than in those grown in rural regions (p Pla or 3 in pollen extracts. Using this validated ELISA, we showed a substantial difference between the amounts of Pla or 3 in pollens grown in different environments. This finding should be considered in developing public policies to reduce traffic pollution, which leads to reduced allergic reactions in atopic subjects.

Computer software to estimate timber harvesting system production, cost, and revenue

Science.gov (United States)

Dr. John E. Baumgras; Dr. Chris B. LeDoux

1992-01-01

Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

Single-molecule exploration of photoprotective mechanisms in light-harvesting complexes

NARCIS (Netherlands)

Yang, Hsiang Yu; Schlau-Cohen, Gabriela S.; Gwizdala, Michal; Krüger, Tjaart; Xu, Pengqi; Croce, Roberta; Van Grondelle, Rienk; Moerner, W. E.

2015-01-01

Plants harvest sunlight by converting light energy to electron flow through the primary events in photosynthesis. One important question is how the light harvesting machinery adapts to fluctuating sunlight intensity. As a result of various regulatory processes, efficient light harvesting and

Designs for thermal harvesting with nonlinear coordinate transformation

Science.gov (United States)

Ji, Qingxiang; Fang, Guodong; Liang, Jun

2018-04-01

In this paper a thermal concentrating design method was proposed based on the concept of generating function without knowing the needed coordinate transformation beforehand. The thermal harvesting performance was quantitatively characterized by heat concentrating efficiency and external temperature perturbation. Nonlinear transformations of different forms were employed to design high order thermal concentrators, and corresponding harvesting performances were investigated by numerical simulations. The numerical results shows that the form of coordinate transformation directly influences the distributions of heat flows inside the concentrator, consequently, influences the thermal harvesting behaviors significantly. The concentrating performance can be actively controlled and optimized by changing the form of coordinate transformations. The analysis in this paper offers a beneficial method to flexibly tune the harvesting performance of the thermal concentrator according to the requirements of practical applications.

Amino Acid Isotope Incorporation and Enrichment Factors in Pacific Bluefin Tuna, Thunnus orientalis

Science.gov (United States)

Bradley, Christina J.; Madigan, Daniel J.; Block, Barbara A.; Popp, Brian N.

2014-01-01

Compound specific isotopic analysis (CSIA) of amino acids has received increasing attention in ecological studies in recent years due to its ability to evaluate trophic positions and elucidate baseline nutrient sources. However, the incorporation rates of individual amino acids into protein and specific trophic discrimination factors (TDFs) are largely unknown, limiting the application of CSIA to trophic studies. We determined nitrogen turnover rates of individual amino acids from a long-term (up to 1054 days) laboratory experiment using captive Pacific bluefin tuna, Thunnus orientalis (PBFT), a large endothermic pelagic fish fed a controlled diet. Small PBFT (white muscle δ15N∼11.5‰) were collected in San Diego, CA and transported to the Tuna Research and Conservation Center (TRCC) where they were fed a controlled diet with high δ15N values relative to PBFT white muscle (diet δ15N∼13.9‰). Half-lives of trophic and source amino acids ranged from 28.6 to 305.4 days and 67.5 to 136.2 days, respectively. The TDF for the weighted mean values of amino acids was 3.0 ‰, ranging from 2.2 to 15.8 ‰ for individual combinations of 6 trophic and 5 source amino acids. Changes in the δ15N values of amino acids across trophic levels are the underlying drivers of the trophic 15N enrichment. Nearly all amino acid δ15N values in this experiment changed exponentially and could be described by a single compartment model. Significant differences in the rate of 15N incorporation were found for source and trophic amino acids both within and between these groups. Varying half-lives of individual amino acids can be applied to migratory organisms as isotopic clocks, determining the length of time an individual has spent in a new environment. These results greatly enhance the ability to interpret compound specific isotope analyses in trophic studies. PMID:24465724

Combine Harvester Simulator

DEFF Research Database (Denmark)

Vilmann, Ole; Sørlie, James Arnold

1999-01-01

A simulator for training pilots in the operation of a modern high-tech combine harvester is presented. The new simulator application is based on DMI´s well-known DMS maritime simulator architecture. Two major challenges have been encountered in the development of the simulator: 1) interfacing the...

Pine Harvest Impact on Soil Structure of a Dystric Cambisol (Humic

Directory of Open Access Journals (Sweden)

Adriano da Costa

2016-01-01

Full Text Available ABSTRACT Traffic of heavy machinery at harvest and log extraction causes structural degradation of the soil, but studies on the effects of forest harvesting on soils with high organic matter content and exchangeable Al are scarce. The objective of this study was to evaluate the effect of mechanized forest harvesting operations on a Dystric Cambisol (Humic with high organic matter (more 50 g kg1 content and exchangeable Al (more 6,0 cmolc kg-1, reforested with Pinus taeda L. The evaluated harvesting system were the whole-tree, in which the feller-buncher cuts and lays the trees down in bundles; the skidder drags the tree bundles up near a road; and the harvester delimbs and cuts the trees into short logs, stacking them on the roadside to be loaded onto trucks. The areas were evaluated for soil conditions at pre-harvest, prior to harvest, and at post-harvest, consisting of areas of low disturbance, high disturbance, forest residues and log yards. The effects of compaction after forest harvesting are observed by the decrease in total porosity (especially biopores and macropores, soil saturated hydraulic conductivity, and stability of aggregates. After forest harvesting, soil compaction was observed in all evaluated situations, but with different depths depending on operation type and the intensity of traffic carried in each area.

A knee-mounted biomechanical energy harvester with enhanced efficiency and safety

Science.gov (United States)

Chen, Chao; Chau, Li Yin; Liao, Wei-Hsin

2017-06-01

Energy harvesting is becoming a major limiting issue for many portable devices. When undertaking any activity, the human body generates a significant amount of biomechanical energy, which can be collected by means of a portable energy harvester. This energy provides a method of powering portable devices such as prosthetic limbs. In this paper, a knee-mounted energy harvester with enhanced efficiency and safety is proposed and developed to convert mechanical energy into electricity during human motion. This device can change the bi-directional knee input into uni-directional rotation for an electromagnetic generator using a specially designed transmission system. Without the constraint of induced impact on the human body, this device can harvest biomechanical energy from both knee flexion and extension, improving the harvesting efficiency over previous single-direction energy harvesters. It can also provide protection from device malfunction, and increase the safety of current biomechanical energy harvesters. A highly compact and light prototype is developed taking into account human kinematics. The biomechanical energy harvesting system is also modeled and analyzed. The prototype is tested under different conditions including walking, running and climbing stairs, to evaluate the energy harvesting performance and effect on the human gait. The experimental results show that the prototype can harvest an average power of 3.6 W at 1.5 m s-1 walking speed, which is promising for portable electronic devices.

Productivity and cost of conventional understory biomass harvesting systems

Science.gov (United States)

Douglas E. Miller; Thomas J. Straka; Bryce J. Stokes; William Watson

1987-01-01

Conventional harvesting equipment was tested for removing forest understory biomass (energywood) for use as fuel. Two types of systems were tested--a one-pass system and a two-pass system. In the one-pass system, the energywood and pulpwood were harvested simultaneously. In the two-pass system, the energywood was harvested in a first pass through the stand, and the...

Simulating cut-to-length harvesting operations in Appalachian hardwoods

Science.gov (United States)

Jingxin Wang; Chris B. LeDoux; Yaoxiang Li

2005-01-01

Cut-to-length (CTL) harvesting systems involving small and large harvesters and a forwarder were simulated using a modular computer simulation model. The two harvesters simulated were a modified John Deere 988 tracked excavator with a single grip sawhead and a Timbco T425 based excavator with a single grip sawhead. The forwarder used in the simulations was a Valmet 524...

Relationship Between Site Disturbance and Forest Harvesting Equipment Traffic

Science.gov (United States)

Tim McDonald; Emily Carter; Steve Taylor; John Tobert

1998-01-01

A study was done to evaluate the use of global positioning systems (GPS) to track the position of forest harvesting equipment and use the information to assess site impacts. GPS units were attached to tree-length harvesting machinery in two clearcuts (1 feller-buncher, 2 skidders). Position of the equipment was recorded at 2-second intervals throughout the harvest of...

Architectures for wrist-worn energy harvesting

Science.gov (United States)

Rantz, R.; Halim, M. A.; Xue, T.; Zhang, Q.; Gu, L.; Yang, K.; Roundy, S.

2018-04-01

This paper reports the simulation-based analysis of six dynamical structures with respect to their wrist-worn vibration energy harvesting capability. This work approaches the problem of maximizing energy harvesting potential at the wrist by considering multiple mechanical substructures; rotational and linear motion-based architectures are examined. Mathematical models are developed and experimentally corroborated. An optimization routine is applied to the proposed architectures to maximize average power output and allow for comparison. The addition of a linear spring element to the structures has the potential to improve power output; for example, in the case of rotational structures, a 211% improvement in power output was estimated under real walking excitation. The analysis concludes that a sprung rotational harvester architecture outperforms a sprung linear architecture by 66% when real walking data is used as input to the simulations.

Harvesting systems and costs for southern pine in the 1980s

Science.gov (United States)

Frederick W. Cubbage; James E. Granskog

1981-01-01

Timber harvesting systems and their costs are a major concern for the forest products industries. In this paper, harvest costs per cord are estimated, using computer simulation, for current southern pine harvesting systems. The estimations represent a range of mechanization levels. The sensitivity of systems to factors affecting harvest costs - machine costs, fuel...

50 CFR 680.21 - Crab harvesting cooperatives.

Science.gov (United States)

2010-10-01

... establishes an annual catch limit of crab that is based on the collective QS holdings of the members of the... the members of the crab harvesting cooperative. (2) Contents of application for annual crab harvesting... permit may appeal the IAD using the appeals procedures described in § 680.43. (c) Restrictions on fishing...

Manufacturing of Proteins and Antibodies: Chapter Downstream Processing Technologies : Harvest Operations.

Science.gov (United States)

Turner, Richard; Joseph, Adrian; Titchener-Hooker, Nigel; Bender, Jean

2017-08-04

Cell harvesting is the separation or retention of cells and cellular debris from the supernatant containing the target molecule Selection of harvest method strongly depends on the type of cells, mode of bioreactor operation, process scale, and characteristics of the product and cell culture fluid. Most traditional harvesting methods use some form of filtration, centrifugation, or a combination of both for cell separation and/or retention. Filtration methods include normal flow depth filtration and tangential flow microfiltration. The ability to scale down predictably the selected harvest method helps to ensure successful production and is critical for conducting small-scale characterization studies for confirming parameter targets and ranges. In this chapter we describe centrifugation and depth filtration harvesting methods, share strategies for harvest optimization, present recent developments in centrifugation scale-down models, and review alternative harvesting technologies.

Protocol and Practice in the Adaptive Management of Waterfowl Harvests

Directory of Open Access Journals (Sweden)

Fred Johnson

1999-06-01

Full Text Available Waterfowl harvest management in North America, for all its success, historically has had several shortcomings, including a lack of well-defined objectives, a failure to account for uncertain management outcomes, and inefficient use of harvest regulations to understand the effects of management. To address these and other concerns, the U.S. Fish and Wildlife Service began implementation of adaptive harvest management in 1995. Harvest policies are now developed using a Markov decision process in which there is an explicit accounting for uncontrolled environmental variation, partial controllability of harvest, and structural uncertainty in waterfowl population dynamics. Current policies are passively adaptive, in the sense that any reduction in structural uncertainty is an unplanned by-product of the regulatory process. A generalization of the Markov decision process permits the calculation of optimal actively adaptive policies, but it is not yet clear how state-specific harvest actions differ between passive and active approaches. The Markov decision process also provides managers the ability to explore optimal levels of aggregation or "management scale" for regulating harvests in a system that exhibits high temporal, spatial, and organizational variability. Progress in institutionalizing adaptive harvest management has been remarkable, but some managers still perceive the process as a panacea, while failing to appreciate the challenges presented by this more explicit and methodical approach to harvest regulation. Technical hurdles include the need to develop better linkages between population processes and the dynamics of landscapes, and to model the dynamics of structural uncertainty in a more comprehensive fashion. From an institutional perspective, agreement on how to value and allocate harvests continues to be elusive, and there is some evidence that waterfowl managers have overestimated the importance of achievement-oriented factors in

Production economics of harvesting small-diameter hardwood stands in central Appalachia

Science.gov (United States)

Yaoxiang Li; Jingxin Wang; Gary Miller; Joe McNeel

2006-01-01

Three harvesting systems of chainsaw/cable skidder, feller-buncher/grapple skidder, and harvester/forwarder were simulated in harvesting three hardwood stands 30 to 50 years old in central Appalachia. Stands were generated by using a 3D stand generator. Harvesting prescriptions included clearcut, shelterwood cut, selective cut, diameter limit cut, and crop tree release...

The role of energy losses in photosynthetic light harvesting

International Nuclear Information System (INIS)

Krüger, T P J; Van Grondelle, R

2017-01-01

Photosynthesis operates at the bottom of the food chain to convert the energy of light into carbohydrates at a remarkable global rate of about 130 TW. Nonetheless, the overall photosynthetic process has a conversion efficiency of a few percent at best, significantly less than bottom-up photovoltaic cells. The primary photosynthetic steps, consisting of light harvesting and charge separation, are often presented as having near-unity quantum efficiency but this holds only true under ideal conditions. In this review, we discuss the importance of energy loss mechanisms to establish robustness in photosynthetic light harvesting. Thermal energy dissipation of light-harvesting complexes (LHCs) in different environments is investigated and the relationships and contrasts between concentration quenching of high pigment concentrations, photoprotection (non-photochemical quenching), quenching due to protein aggregation, and fluorescence blinking are discussed. The role of charge-transfer states in light harvesting and energy dissipation is highlighted and the importance of controlled protein structural disorder to switch the light-harvesting antennae between effective light harvesters and efficient energy quenchers is underscored. The main LHC of plants, LHCII, is used as a prime example. (topical review)

FOREST HARVEST SCHEDULING PLAN INTEGRATED TO THE ROAD NETWORK

Directory of Open Access Journals (Sweden)

Pedro Henrique Belavenutti Martins da Silva

2016-03-01

Full Text Available In industrial forest plantations, the spatial distribution of management units for harvest scheduling influences the timber production cost and the non-renewable resources consumption, due to issues related to transport logistic. In this context, this research aimed to formulate Integer Linear Programming (ILP by means of the application of Floyd-Warshall network optimization algorithm to generate timber production routes, minimizing the production costs resulting from harvest activities and forest road maintenance. Then, scenarios were simulated considering different minimal harvest ages for Pinus spp. and Eucalyptus spp. stands. The planning horizon was five years with annual periodicity. The study area was 23,330 hectares of forests, located in Paraná state (southern Brazil. We compared the simulated scenarios according to the following parameter indicators: harvest income, building road network and the production unit cost. The decreasing of the minimal harvest age reduces the mean production of management units scheduled to be harvested, in other hand, it requires fewer roads to be built, and consequently increases the production unit cost. The solutions obtained by using ILP models presented an optimality gap lower than 0.1%.

Finite element analysis of hybrid energy harvesting of piezoelectric and electromagnetic

Directory of Open Access Journals (Sweden)

Muhammad Yazid Muhammad Ammar Faris

2017-01-01

Full Text Available Harvesting energy from ambient vibrations is a highly required method because of the wide range of available sources that produce vibration energy application from industrial machinery to human motion application. In this paper, the implementation of harvesting energy from two technologies to form a hybrid energy harvester system was analyzed. These two technologies involve the piezoelectric harvesting energy and the electromagnetic harvesting energy. A finite element model was developed using the Ansys software with the harmonic analysis solver to analyze and examine hybrid harvesting energy system. Both power output generated from the magnet and the piezoelectric is then combined to form one unit of energy. Further, it was found that the result shows the system generate the maximum power output of 14.85 μW from 100 Hz, 4.905 m/s2, and 0.6 cm3 for resonance frequency, acceleration, and the volume respectively from the optimal energy harvester design. Normalized Power Density (NPD result of 10.29 kgs/m3 comparable with other literature also can be used in energy harvesting system for vibration application.

Effects of odors on behaviors of captive Amur leopards Panthera pardus orientalis

Directory of Open Access Journals (Sweden)

Shangying YU

2009-02-01

Full Text Available Captive environments often fail to resemble the wild environment in respects of limited space, unchanging habitat, lack of stimulus and contingency. Common animal welfare problems which occur in captive animals include low behavioral diversity, abnormal behavior and excessive inactivity. Environmental enrichment, as an effective strategy to tackle these problems and promote mental health of captive animals, has been recognized as an important principal for captive animal management. Among all the enrichment techniques, olfactory enrichment is a simple and effective method for improving the well-being of the olfactory sensitive felids. Behavioral problems were observed in six Amur leopards Panthera pardus orientalis at Beijing Zoological Garden. These were held in the older type exhibits which have now been rebuilt. These behaviors include stereotypic behavior and excessive inactivity caused by the spatially limited enclosures with low levels of stimuli. To determine the effects of predator, prey, and herb odors as potential enrichment materials for captive leopards, we conducted olfactory enrichment experiments for the leopards and tested the effects of nutmeg Myristica fragrans, feces of roe deer Capreolus capreolus and urine of Amur tiger Panthera tigris altaica to test for an increase in behavioral repertoire and activity. Odors provided in this study were also believed to improve the psychological and physiological health of individuals. To standardize the method of presentation the odors were introduced to the enclosures by rubbing or spraying onto a clean towel. Our results show that the selected three odors effectively increased the behavioral diversity. Ten new behavior types were observed in the nutmeg experiment, eight in the feces of roe deer experiment and six in the tiger urine experiment. Among the three odors, cats responded to nutmeg for the longest duration, followed by tiger urine and feces of roe deer. Leopards showed more

Integrated energy wood and pulpwood harvesting in first-thinning stands

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Pajuoja, H. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi, Email: heikki.pajuoja@metsateho.fi; Hoegnaes, T. (Metsaehallitus, Kajaani (Finland)), Email: tore.hognas@metsa.fi; Mutikainen, A. (TTS Research, Rajamaeki (Finland)), Email: arto.mutikainen@tts.fi

2009-07-01

The integrated harvesting of industrial roundwood and energy wood by the so-called 'two-pile cutting method' has increased strongly in young forests in Finland during the last two years. The studies carried out by Metsaeteho Oy, Metsaehallitus and TTS Research (I) determined the time consumption and productivity in cutting work when using the integrated cutting of first-thinning wood, (II) clarified the development of the total removal in integrated harvesting operation, and (III) investigated the quality of pulpwood poles when using integrated the quality of pulpwood poles when using integrated cutting with multi-tree handling. The studies indicated that the total removal in integrated wood harvesting increases significantly compared to that of conventional, separate roundwood harvesting. When the total removal from the harvesting site increased considerably, there was a significant increase in the productivity of cutting work in integrated wood harvesting compared to the situation in separate pulpwood harvesting. In addition, the delimbing quality and bucking accuracy of the pulpwood poles obtained in multi-tree processing were comparable to those produced in single-tree handling. There were no problems with measuring the work output by a grapple scale attached to the boom of the forwarder. As the studies indicated very promising experiences in integrated wood cutting, integrated harvesting is likely to continue to increase in both first and later thinning in Finland. (orig.)

A vibration energy harvesting device with bidirectional resonance frequency tunability

International Nuclear Information System (INIS)

Challa, Vinod R; Prasad, M G; Shi Yong; Fisher, Frank T

2008-01-01

Vibration energy harvesting is an attractive technique for potential powering of wireless sensors and low power devices. While the technique can be employed to harvest energy from vibrations and vibrating structures, a general requirement independent of the energy transfer mechanism is that the vibration energy harvesting device operate in resonance at the excitation frequency. Most energy harvesting devices developed to date are single resonance frequency based, and while recent efforts have been made to broaden the frequency range of energy harvesting devices, what is lacking is a robust tunable energy harvesting technique. In this paper, the design and testing of a resonance frequency tunable energy harvesting device using a magnetic force technique is presented. This technique enabled resonance tuning to ± 20% of the untuned resonant frequency. In particular, this magnetic-based approach enables either an increase or decrease in the tuned resonant frequency. A piezoelectric cantilever beam with a natural frequency of 26 Hz is used as the energy harvesting cantilever, which is successfully tuned over a frequency range of 22–32 Hz to enable a continuous power output 240–280 µW over the entire frequency range tested. A theoretical model using variable damping is presented, whose results agree closely with the experimental results. The magnetic force applied for resonance frequency tuning and its effect on damping and load resistance have been experimentally determined

Site properties for Crimean juniper (Juniperus excelsa) in semi-natural forests of south western Anatolia, Turkey.

Science.gov (United States)

Ozkan, Kürsad; Gulsoy, Serkan; Aerts, Raf; Muys, Bart

2010-01-01

We explored the semi-natural forests in south western Anatolia along a gradient between Mediterranean and continental climates to determine the site requirements of Juniperus excelsa in Turkey. We hypothesized that environmental variables and indicator species can be used to predict differences in occurrence and cover of J. excelsa and can therefore support decision making in reforestation management planning. Plant species composition and environmental variables were assessed in 153 plots. Association between J. excelsa and other plant species and environmental variables were analyzed using Fisher exact probability tests and stepwise discriminant analysis. High altitude (> 1000 m) as a proxy for an Oromediterranean climate, and high surface stoniness as a proxy for low competition by other tree species, are positive site properties for J. excelsa. The tree species avoids Eumediterranean and Supramediterranean plant communities. Twelve plant species, including the herbs Dianthus zonatus, Ajuga chamaepitys and Paronchia carica and the shrub Cotoneaster nummularia may be used as site indicators for J. excelsa restoration. Platanus orientalis, with similar site requirements but at present negatively associated to J. excelsa due to competitive effects, may be considered an additional indicator if stand conversion (harvesting and replacing P. orientalis) is part of the management plan.

Design and fabrication of an energy-harvesting device using vibration absorber

Science.gov (United States)

Heidari, Hamidreza; Afifi, Arash

2017-05-01

Energy-harvesting devices collect energy that is being wasted and convert to the electrical energy. For this reason, this type of devices is considered as a convenient alternative to traditional batteries. In this paper, experimental examinations were performed to investigate the application of harvesting device for the reduction of the vibration amplitude in a vibration system and also increase the efficiency of energy-harvesting device. This study focuses on the energy-harvesting device as both producing electrical device and a vibration disabled absorber. In this regard, a motion-based energy-harvesting device is designed to produce electrical energy and also eliminate vibrations of a two joint-end beam which is located under the harmonic excitation force. Then, the governing equations of the forced motion on the main beam are derived and energy-harvesting system are simulated. In addition, the system designed by MATLAB simulation is explained and its results are expressed. Finally, a prototype of the system was made and the ability of the energy-harvesting device to absorb the original system vibrations, as well as parameters impact on the efficiency of energy harvesting is investigated. Experimental results show that the energy-harvesting device, in addition to producing electric current with a maximum value of 1.5V, reduces 94% of the original system vibrations.

Wideband quin-stable energy harvesting via combined nonlinearity

Directory of Open Access Journals (Sweden)

Chen Wang

2017-04-01

Full Text Available In this work, we propose a wideband quintuple-well potential piezoelectric-based vibration energy harvester using a combined nonlinearity: the magnetic nonlinearity induced by magnetic force and the piecewise-linearity produced by mechanical impact. With extra stable states compared to other multi-stable harvesters, the quin-stable harvester can distribute its potential energy more uniformly, which provides shallower potential wells and results in lower excitation threshold for interwell motion. The mathematical model of this quin-stable harvester is derived and its equivalent piecewise-nonlinear restoring force is measured in the experiment and identified as piecewise polynomials. Numerical simulations and experimental verifications are performed in different levels of sinusoid excitation ranging from 1 to 25 Hz. The results demonstrate that, with lower potential barriers compared with tri-stable counterpart, the quin-stable arrangement can escape potential wells more easily for doing high-energy interwell motion over a wider band of frequencies. Moreover, by utilizing the mechanical stoppers, this harvester can produce significant output voltage under small tip deflections, which results in a high power density and is especially suitable for a compact MEMS approach.

Design optimization of PVDF-based piezoelectric energy harvesters

Directory of Open Access Journals (Sweden)

Jundong Song

2017-09-01

Full Text Available Energy harvesting is a promising technology that powers the electronic devices via scavenging the ambient energy. Piezoelectric energy harvesters have attracted considerable interest for their high conversion efficiency and easy fabrication in minimized sensors and transducers. To improve the output capability of energy harvesters, properties of piezoelectric materials is an influential factor, but the potential of the material is less likely to be fully exploited without an optimized configuration. In this paper, an optimization strategy for PVDF-based cantilever-type energy harvesters is proposed to achieve the highest output power density with the given frequency and acceleration of the vibration source. It is shown that the maximum power output density only depends on the maximum allowable stress of the beam and the working frequency of the device, and these two factors can be obtained by adjusting the geometry of piezoelectric layers. The strategy is validated by coupled finite-element-circuit simulation and a practical device. The fabricated device within a volume of 13.1 mm3 shows an output power of 112.8 μW which is comparable to that of the best-performing piezoceramic-based energy harvesters within the similar volume reported so far.

Architecture-independent power bound for vibration energy harvesters

International Nuclear Information System (INIS)

Halvorsen, E; Le, C P; Mitcheson, P D; Yeatman, E M

2013-01-01

The maximum output power of energy harvesters driven by harmonic vibrations is well known for a range of specific harvester architectures. An architecture-independent bound based on the mechanical input-power also exists and gives a strict limit on achievable power with one mechanical degree of freedom, but is a least upper bound only for lossless devices. We report a new theoretical bound on the output power of vibration energy harvesters that includes parasitic, linear mechanical damping while still being architecture independent. This bound greatly improves the previous bound at moderate force amplitudes and is compared to the performance of established harvester architectures which are shown to agree with it in limiting cases. The bound is a hard limit on achievable power with one mechanical degree of freedom and can not be circumvented by transducer or power-electronic-interface design

Performance of a piezoelectric energy harvester in actual rain

International Nuclear Information System (INIS)

Wong, Voon-Kean; Ho, Jee-Hou; Chai, Ai-Bao

2017-01-01

When raindrops impact on the surface of a piezoelectric beam, strain energy produced by the impinging raindrop will be converted to harvestable electrical energy by the piezoelectric layers in a cantilever beam. The novelty of this study is to investigate the performance of the harvester in actual rain and provide practical insights on implementation. The influences of rain parameters such as rain rate, rainfall depth, raindrop count, and drop size distribution (DSD) are discussed in this study. The raindrops accumulated on the surface of the piezoelectric beam will form a water layer. It is described using added mass coefficient in this study. In an actual rain experiment, a piezoelectric beam with surface area of 0.0018 m 2 is able to produce 2076 μJ of energy over a duration of 301 min. The energy generation of a raindrop impact piezoelectric energy harvester is highly dependent on the rain rate. Due to the inconsistency of the energy generation, the piezoelectric energy harvester would require an integration of suitable energy storage device for continuous operation. Nevertheless, this work shows the feasibility of harvesting raindrop energy using a piezoelectric beam. - Highlights: • The performance of a piezoelectric rain energy harvester is tested in actual rain. • The energy generation is highly dependent on the rain rate. • Practical insights on the implementation of the harvester are discussed. • A total energy of 2076 μJ is generated over a duration of 301 min.

A triple hybrid micropower generator with simultaneous multi-mode energy harvesting

Science.gov (United States)

Uluşan, H.; Chamanian, S.; Pathirana, W. P. M. R.; Zorlu, Ö.; Muhtaroğlu, A.; Külah, H.

2018-01-01

This study presents a triple hybrid energy harvesting system that combines harvested power from thermoelectric (TE), vibration-based electromagnetic (EM) and piezoelectric (PZT) harvesters into a single DC supply. A power management circuit is designed and implemented in 180 nm standard CMOS technology based on the distinct requirements of each harvester, and is terminated with a Schottky diode to avoid reverse current flow. The system topology hence supports simultaneous power generation and delivery from low and high frequency vibrations as well as temperature differences in the environment. The ultra-low DC voltage harvested from TE generator is boosted with a cross-coupled charge-pump driven by an LC oscillator with fully-integrated center-tapped differential inductors. The EM harvester output was rectified with a self-powered and low drop-out AC/DC doubler circuit. The PZT interface electronics benefits from peak-to-peak cycle of the harvested voltage through a negative voltage converter followed by synchronous power extraction and DC-to-DC conversion through internal switches, and an external inductor. The hybrid system was tested with a wearable in-house EM energy harvester placed wrist of a jogger, a commercial low volume PZT harvester, and DC supply as the TE generator output. The system generates more than 1.2 V output for load resistances higher than 50 kΩ, which corresponds to 24 μW to power wearable sensors. Simultaneous multi-mode operation achieves higher voltage and power compared to stand-alone harvesting circuits, and generates up to 110 μW of output power. This is the first hybrid harvester circuit that simultaneously extracts energy from three independent sources, and delivers a single DC output.

West Virginia harvest and utilization study, 2008

Science.gov (United States)

Jan Wiedenbeck; Shawn. Grushecky

2014-01-01

Thirty active harvesting operations were part of a harvest and utilization study conducted in West Virginia in 2008. Data were collected on roundwood product and residue yields obtained from trees of different sizes, species, and qualities. This study was modeled after studies conducted on a regular and frequent basis by the Forest Inventory and Analysis unit in the...

Hybrid acoustic energy harvesting using combined electromagnetic and piezoelectric conversion

Science.gov (United States)

Khan, Farid Ullah; Izhar

2016-02-01

This paper reports a novel hybrid acoustic energy harvester. The harvester utilizes both the electromagnetic and piezoelectric conversion mechanisms simultaneously to convert the ambient acoustical noise into electrical power for self-powered wireless sensor nodes. The proposed harvester is comprised of a Helmholtz resonator, two magnets mounted on a piezoelectric plate, and a wound coil located under the magnets. The harvester is characterized both under harmonic and real random acoustical excitations. In-lab, under harmonic acoustical excitation at a sound pressure level of 130 dB and frequency of 2.1 kHz, an optimum power of 2.86 μW (at 114 Ω optimum load) is obtained from electromagnetic conversion and 50 μW (at 1000 Ω optimum load) is generated by the piezoelectric harvester's part. Moreover, in real acoustical environment of a domestic electric generator the peak voltages of 40 and 123 mV are produced by the electromagnetic and piezoelectric portions of the acoustic energy harvester.

Harvesting Method Affects Water Dynamics and Yield of Sweet Orange with Huanglongbing

Directory of Open Access Journals (Sweden)

Said A. Hamido

2018-03-01

Full Text Available Changes in grove management practices may change crop water dynamics. The objective of this study was to estimate sap flow, stem water potential (Ψstem, and citrus yield as affected by harvesting methods in sweet orange (Citrus sinensis trees affected by Huanglongbing. The study was initiated in March 2015 for two years on five-year-old commercial sweet orange trees at a commercial grove located at Felda, Florida (26.61° N, 81.48° W on Felda fine sand soil (Loamy, siliceous, superactive, hyperthermic Arenic Endoaqualfs. All measurements were replicated before and after harvest in four experiments (A, B, C and D under hand and mechanical harvesting treatments. Sap flow measurements were taken on four trees per treatment with two sensors per tree. Sap flow measured by the heat balance method at hourly intervals during March and April of 2015 and 2016 significantly declined after harvesting by 25% and 35% after hand and mechanical harvesting, respectively. Ψstem measured after harvest was significantly higher than measurements before harvest. The average value of Ψstem measured increased by 10% and 6% after hand and mechanical harvesting, respectively. Mechanical harvesting exhibited lower fruit yields that averaged between 83%, 63%, 49% and 36% of hand-harvested trees under A, B, C and D experiments, respectively. It is concluded that the hand harvesting method is less stressful and less impactful on tree water uptake and fruit yield compared with mechanical harvesting.

Reliability evaluation and analysis of sugarcane 7000 series harvesters in sugarcane harvesting

Directory of Open Access Journals (Sweden)

P Najafi

2015-09-01

Full Text Available Introduction: The performance of agricultural machines depends on the reliability of the equipment used, the maintenance efficiency, the operation process, the technical expertise of workers, etc. As the size and complexity of agricultural equipment continue to increase, the implications of equipment failure become even more critical. Machine failure probability is (1-R and R is machine reliability (Vafaei et al., 2010. Moreover, system reliability is the probability that an item will perform a required function without failure under stated conditions for a stated period of time (Billinton and Allan, 1992. Therefore, we must be able to create an appropriate compromise between maintenance methods and acceptable reliability levels. Precision failure data gathering in a farm is a worthwhile work, because these can represent a good estimate of machine reliability combining the effects of machine loading, surrounding effects and incorrect repair and maintenance. Each machine based on its work conditions, parts combinationand manufacturing process follows a failures distribution function depending on the environment where the machine work and the machine’s specifications (Meeker and Escobar, 1998. General failures distributions for contiguous data are normal, log-normal, exponential and Weibull (Shirmohamadi, 2002. Each machine can represent proportionate behavior with these functions in short or long time. Materials and methods: The study area was the Hakim Farabi agro-industry Company located 35 kilometers south of Ahvaz in Iran. Arable lands of this company are located in 31 to 31°10 N latitude and 45 to 48°36 E longitudes. The region has dry and warm climate. A total of 24 Austoft 7000 sugarcane chopper harvester are being used in the company. Cane harvesters were divided into 3 group consisting of old, middle aged and new. From each group, one machine was chosen. Data from maintenance reports of harvesters which have been recorded within 400

Investigation of timber harvesting mechanization progress in Turkey ...

African Journals Online (AJOL)

Log in or Register to get access to full text downloads. ... of substantial number of harvesters, the amount of modern harvesting processor in Turkey is not sufficient. Different type and marked machines have not been taken into consideration to ...

Evaluating timber harvesting impacts on wildlife habitat suitability using FOREX

Science.gov (United States)

Chris B. LeDoux

1997-01-01

Precommercial, commercial, and final harvesting operations can impact wildlife habitat suitability by altering the vegetation composition on a given site. Harvesting operations remove trees and many times provide the necessary perturbation to trigger successional conditions different from those that existed prior to the harvest. Although these new successional changes...

TRANSMISSION OF IMPACTS DURING MECHANICAL GRAPE HARVESTING AND TRANSPORTATION

Directory of Open Access Journals (Sweden)

Fabio Pezzi

2008-09-01

Full Text Available The aim of the research was to study vibrational stress on grapes during mechanical harvesting, transfer and delivery to the winery, in order to identify the most critical stages and the consequent effects on the winemaking. An instrumented sphere was used to evaluate and memorise the impacts in the grape harvester and means of transport. Three treatments, obtained by differing harvesting method (manual and mechanical and transport type (short and long distance, were compared. A correlation was sought between the transmitted stresses and characteristics of the harvested product. The effects on product quality were evaluated by chemical analyses of the musts and sensorial analysis of the end-product, vinified using the same procedure.

Harvesting Atlantic Cod under Climate Variability

Science.gov (United States)

Oremus, K. L.

2016-12-01

Previous literature links the growth of a fishery to climate variability. This study uses an age-structured bioeconomic model to compare optimal harvest in the Gulf of Maine Atlantic cod fishery under a variable climate versus a static climate. The optimal harvest path depends on the relationship between fishery growth and the interest rate, with higher interest rates dictating greater harvests now at the cost of long-term stock sustainability. Given the time horizon of a single generation of fishermen under assumptions of a static climate, the model finds that the economically optimal management strategy is to harvest the entire stock in the short term and allow the fishery to collapse. However, if the biological growth of the fishery is assumed to vary with climate conditions, such as the North Atlantic Oscillation, there will always be pulses of high growth in the stock. During some of these high-growth years, the growth of the stock and its economic yield can exceed the growth rate of the economy even under high interest rates. This implies that it is not economically optimal to exhaust the New England cod fishery if NAO is included in the biological growth function. This finding may have theoretical implications for the management of other renewable yet exhaustible resources whose growth rates are subject to climate variability.

Effect of harvest date and stalk section on selected strength ...

African Journals Online (AJOL)

Background: The time required to harvest plant crops is important to the plant properties. It is affected by design of the harvest equipment and the desire for high-quality products with low energy usage. Materials and Methods: Strength characteristics of Origanum onites L., an important medicinal aromatic plant, harvested on ...

Recent Rates of Forest Harvest and Conversion in North America

Science.gov (United States)

Masek, Jeffrey G.; Cohen, Warren B.; Leckie, Donald; Wulder, Michael A.; Vargas, Rodrigo; de Jong, Ben; Healey, Sean; Law, Beverly; Birdsey, Richard; Houghton, R. A.;

Sustainable Performance in Energy Harvesting - Wireless Sensor Networks

DEFF Research Database (Denmark)

Fafoutis, Xenofon; Di Mauro, Alessio; Dragoni, Nicola

2013-01-01

In this practical demo we illustrate the concept of "sustainable performance" in Energy-Harvesting Wireless Sensor Networks (EH-WSNs). In particular, for different classes of applications and under several energy harvesting scenarios, we show how it is possible to have sustainable performance when...

Rainwater harvesting in arid and semi-arid zones

NARCIS (Netherlands)

Boers, T.M.

1994-01-01

In arid and semi-arid regions, the scarcity of water can be alleviated by rainwater harvesting, which is defined as a method of inducing, collecting, storing, and conserving local surface runoff for agriculture. Rainwater harvesting can be applied with different

Economic analysis of water harvesting technologies in Ethiopia

NARCIS (Netherlands)

Wakeyo, M.B.

2012-01-01

Rainfall shortage and variability constrain crop production of smallholder farmers in Ethiopia and climate change may even aggravate this problem. An attractive method to mitigate this is water harvesting. This thesis examines the economic aspects of water harvesting by exploring optimal water

Chronic Wasting Disease: Transmission Mechanisms and the Possibility of Harvest Management

Science.gov (United States)

Potapov, Alex; Merrill, Evelyn; Pybus, Margo; Lewis, Mark A.

2016-01-01

We develop a model of CWD management by nonselective deer harvest, currently the most feasible approach available for managing CWD in wild populations. We use the model to explore the effects of 6 common harvest strategies on disease prevalence and to identify potential optimal harvest policies for reducing disease prevalence without population collapse. The model includes 4 deer categories (juveniles, adult females, younger adult males, older adult males) that may be harvested at different rates, a food-based carrying capacity, which influences juvenile survival but not adult reproduction or survival, and seasonal force of infection terms for each deer category under differing frequency-dependent transmission dynamics resulting from environmental and direct contact mechanisms. Numerical experiments show that the interval of transmission coefficients β where the disease can be controlled is generally narrow and efficiency of a harvest policy to reduce disease prevalence depends crucially on the details of the disease transmission mechanism, in particular on the intensity of disease transmission to juveniles and the potential differences in the behavior of older and younger males that influence contact rates. Optimal harvest policy to minimize disease prevalence for each of the assumed transmission mechanisms is shown to depend on harvest intensity. Across mechanisms, a harvest that focuses on antlered deer, without distinguishing between age classes reduces disease prevalence most consistently, whereas distinguishing between young and older antlered deer produces higher uncertainty in the harvest effects on disease prevalence. Our results show that, despite uncertainties, a modelling approach can determine classes of harvest strategy that are most likely to be effective in combatting CWD. PMID:26963921

Wireless Underwater Monitoring Systems Based on Energy Harvestings

Directory of Open Access Journals (Sweden)

Sea-Hee HWANGBO

2013-01-01

Full Text Available One of the important research fields for aquatic exploitation and conservation is underwater wireless sensor network. Since limited energy source for underwater nodes and devices is a main open problem, in this paper, we propose wireless underwater monitoring systems powered by energy harvester which resolves the energy constraint. The target system generates renewable energy from energy harvester and shares the energy with underwater sensor nodes. For the realization of the system, key components to be investigated are discriminated as follows: acoustic modem, actuator, smart battery charge controller, energy harvester and wireless power transfer module. By developing acoustic modem, actuator and smart battery charge controller and utilizing off-the-shelf energy harvester and wireless power transfer module, we design and implement a prototype of the system. Also, we verify the feasibility of concept of target system by conducting indoor and outdoor experiments.

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional Effect of time experience of Harvester operators in operating yield

Directory of Open Access Journals (Sweden)

Elaine Cristina Leonello

2012-12-01

Full Text Available A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.The mechanization of timber harvesting allows greater control of costs and can provide reductions in relatively short intervals. Moreover, it has a place in the humanization of the working forest and the increase in performance. This work provides comparisons of operating performance of different operator harvester according to the time of experience in the activity. The operators evaluated were eight males, aged between 23 and 46 years old. The study consisted of analysis of the volume of timber harvested by the harvester. The experience significantly affects the performance of harvesters operators. The performance increases significantly in the first 18 months of experience, and it remained on

A broadband electromagnetic energy harvester with a coupled bistable structure

International Nuclear Information System (INIS)

Zhu, D; Beeby, S P

2013-01-01

This paper investigates a broadband electromagnetic energy harvester with a coupled bistable structure. Both analytical model and experimental results showed that the coupled bistable structure requires lower excitation force to trigger bistable operation than conventional bistable structures. A compact electromagnetic vibration energy harvester with a coupled bistable structure was implemented and tested. It was excited under white noise vibrations. Experimental results showed that the coupled bistable energy harvester can achieve bistable operation with lower excitation amplitude and generate more output power than both conventional bistable and linear energy harvesters under white noise excitation

Optimal Spatial Harvesting Strategy and Symmetry-Breaking

International Nuclear Information System (INIS)

Kurata, Kazuhiro; Shi Junping

2008-01-01

A reaction-diffusion model with logistic growth and constant effort harvesting is considered. By minimizing an intrinsic biological energy function, we obtain an optimal spatial harvesting strategy which will benefit the population the most. The symmetry properties of the optimal strategy are also discussed, and related symmetry preserving and symmetry breaking phenomena are shown with several typical examples of habitats

Sharp Dissection versus Electrocautery for Radial Artery Harvesting

Science.gov (United States)

Marzban, Mehrab; Arya, Reza; Mandegar, Mohammad Hossein; Karimi, Abbas Ali; Abbasi, Kiomars; Movahed, Namvar; Abbasi, Seyed Hesameddin

2006-01-01

Radial arteries have been increasingly used during the last decade as conduits for coronary artery revascularization. Although various harvesting techniques have been described, there has been little comparative study of arterial damage and patency. A radial artery graft was used in 44 consecutive patients, who were randomly divided into 2 groups. In the 1st group, the radial artery was harvested by sharp dissection and in the 2nd, by electrocautery. These groups were compared with regard to radial artery free flow, harvest time, number of clips used, complications, and endothelial damage. Radial artery free flow before and after intraluminal administration of papaverine was significantly greater in the electrocautery group (84.3 ± 50.7 mL/min and 109.7 ± 68.5 mL/min) than in the sharp-dissection group (52.9 ± 18.3 mL/min and 69.6 ± 28.2 mL/ min) (P =0.003). Harvesting time by electrocautery was significantly shorter (25.4 ± 4.3 min vs 34.4 ± 5.9 min) (P =0.0001). Electrocautery consumed an average of 9.76 clips, versus 22.45 clips consumed by sharp dissection. The 2 groups were not different regarding postoperative complications, except for 3 cases of temporary paresthesia of the thumb in the electrocautery group; histopathologic examination found no endothelial damage. We conclude that radial artery harvesting by electrocautery is faster and more economical than harvesting by sharp dissection and is associated with better intraoperative flow and good preservation of endothelial integrity. PMID:16572861

Comparison of wood harvesting methods in the Republic of Karelia

Energy Technology Data Exchange (ETDEWEB)

Syunev, V.; Sokolov, A.; Konovalov, A.; Katarov, V.; Seliverstov, A.; Gerasimov, Y.; Karvinen, S. email: sari.karvinen@metla.fi; Vaelkky, E.

2009-07-01

Impacts of cut-to-length, tree-length and full-tree harvesting technology on direct operating costs, productivity, forest environment, ergonomics and work safety, as well as on wood quality were studied in 2007 and 2008 in 15 harvesting companies in the Republic of Karelia, Russia. Productivity varied within a relatively wide range from 20 to 150 m3 per shift. Fully mechanized full-tree harvesting provided the maximum productivity. The professional skills and experience of harvesting machine operators had a significant impact on the productivity. Direct operating costs had insignificant differences - the average costs were 250 RUB/m3. In the traditional Russian tree-length and full-tree harvesting, real harvesting costs were higher than in the cut-to-length technology, due to additional work at the central processing yard. All the technologies demonstrated an almost identical impact on the lower layers of soil, when applied on sandy or sandy loam soils. Porosity was reduced by 9-10%. On clay loams, the tree-length technology resulted in significant topsoil compaction but, at the same time, formed almost no track. The studied full-tree technology was only acceptable in harvesting sites where no undergrowth preservation was required. Partially mechanized cut-to-length technology ensured high undergrowth preservation. In thinnings the tree-length and the fully mechanized cut-to-length technology resulted in less damage to the remaining trees compared to the other technologies. The best working conditions in terms of ergonomics and occupational safety were provided by the chain consisting of a harvester and a forwarder. It was closely followed by the chain 'feller buncher and wheeled skidder'. Traditional tree-length harvesting with cable skidders demonstrated the worst results in terms of ergonomics, work severity and occupational safety. Fully mechanized cut-to-length technology provided with the best results in the preservation of wood quality The quality

Bistable energy harvesting enhancement with an auxiliary linear oscillator

Science.gov (United States)

Harne, R. L.; Thota, M.; Wang, K. W.

2013-12-01

Recent work has indicated that linear vibrational energy harvesters with an appended degree-of-freedom (DOF) may be advantageous for introducing new dynamic forms to extend the operational bandwidth. Given the additional interest in bistable harvester designs, which exhibit a propitious snap through effect from one stable state to the other, it is a logical extension to explore the influence of an added DOF to a bistable system. However, bistable snap through is not a resonant phenomenon, which tempers the presumption that the dynamics induced by an additional DOF on bistable designs would inherently be beneficial as for linear systems. This paper presents two analytical formulations to assess the fundamental and superharmonic steady-state dynamics of an excited bistable energy harvester to which is attached an auxiliary linear oscillator. From an energy harvesting perspective, the model predicts that the additional linear DOF uniformly amplifies the bistable harvester response magnitude and generated power for excitation frequencies less than the attachment’s resonance while improved power density spans a bandwidth below this frequency. Analyses predict bandwidths having co-existent responses composed of a unique proportion of fundamental and superharmonic dynamics. Experiments validate key analytical predictions and observe the ability for the coupled system to develop an advantageous multi-harmonic interwell response when the initial conditions are insufficient for continuous high-energy orbit at the excitation frequency. Overall, the addition of an auxiliary linear oscillator to a bistable harvester is found to be an effective means of enhancing the energy harvesting performance and robustness.

Nonlinear analysis and characteristics of inductive galloping energy harvesters

Science.gov (United States)

Dai, H. L.; Yang, Y. W.; Abdelkefi, A.; Wang, L.

2018-06-01

This paper presents an investigation on analysis and characteristics of aerodynamic electromagnetic energy harvesters. The source of aeroelastic oscillations results from galloping of a prismatic structure. A nonlinear distributed-parameter model is developed representing the dynamics of the transverse degree of freedom and the electric current induced in the coil. Firstly, we perform a linear analysis to study the impacts of the external electrical resistance, magnet placement, electromagnetic coupling coefficient, and internal resistance in the coil on the cut-in speed of instability of the coupled electroaeroelastic system. It is demonstrated that these parameters have significant impacts on cut-in speed of instability of the harvester system. Subsequently, a nonlinear analysis is implemented to explore the influences of these parameters on the output property of the energy harvester. The results show that there exists an optimal external electrical resistance which maximizes the output power of the harvester, and this optimal value varies with the magnet's placement, wind speed, electromagnetic coupling coefficient and internal resistance of the coil. It is also demonstrated that an increase in the distance between the clamped end and the magnet, an increase in the electromagnetic coupling coefficient, and/or a decrease in the internal resistance of the coil are accompanied by an increase in the level of the harvested power and a decrease in the tip displacement of the bluff body which is associated with a resistive-shunt damping effect in the harvester. The implemented studies give a constructive guidance to design and enhance the output performance of aerodynamic electromagnetic energy harvesters.

Data retrieval time for energy harvesting wireless sensors

NARCIS (Netherlands)

Mitici, M.A.; Goseling, Jasper; de Graaf, Maurits; Boucherie, Richardus J.

2015-01-01

We consider the problem of retrieving a reliable estimate of an attribute monitored by a wireless sensor network, where the sensors harvest energy from the environment independently, at random. Each sensor stores the harvested energy in batteries of limited capacity. Moreover, provided they have

Harvester development for new high yielding SRC crops and markets

Energy Technology Data Exchange (ETDEWEB)

Paulson, Mark

2005-07-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented.

Harvester development for new high yielding SRC crops and markets

International Nuclear Information System (INIS)

Paulson, Mark

2005-01-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented

An innovative tri-directional broadband piezoelectric energy harvester

Energy Technology Data Exchange (ETDEWEB)

Su, Wei-Jiun, E-mail: weijiun@mie.utoronto.ca; Zu, Jean [Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Ontario M5S 3G8 (Canada)

2013-11-11

This paper presents a tri-directional piezoelectric energy harvester that is able to harvest vibration energy over a wide bandwidth from three orthogonal directions. The harvester consists of a main beam, an auxiliary beam, and a spring-mass system, with magnets integrated to introduce nonlinear force and couple the three sub-systems. Theoretical analysis and experiments were performed at constant acceleration under frequency sweeps to acquire frequency responses. The experimental results show that the voltage can achieve more than 2 V over more than 5 Hz of bandwidth with 1 MΩ load in the three orthogonal directions.

Axial Permanent Magnet Generator for Wearable Energy Harvesting

DEFF Research Database (Denmark)

Högberg, Stig; Sødahl, Jakob Wagner; Mijatovic, Nenad

2016-01-01

An increasing demand for battery-free electronics is evident by the rapid increase of wearable devices, and the design of wearable energy harvesters follows accordingly. An axial permanent magnet generator was designed to harvest energy from human body motion and supplying it to a wearable......W, respectively) with an iron yoke is subject to losses that exceed the realistic input power, and was therefore deemed infeasible. A generator without the iron yoke was concluded to perform well as a wearable energy harvester. An experimental investigation of a prototype revealed an output power of almost 1 m...

Engineered Nanomaterials for Energy Harvesting and Storage Applications

Science.gov (United States)

Gullapalli, Hemtej

Energy harvesting and storage are independent mechanisms, each having their own significance in the energy cycle. Energy is generally harvested from temperature variations, mechanical vibrations and other phenomena which are inherently sporadic in nature, harvested energy stands a better chance of efficient utilization if it can be stored and used later, depending on the demand. In essence a comprehensive device that can harness power from surrounding environment and provide a steady and reliable source of energy would be ideal. Towards realizing such a system, for the harvesting component, a piezoelectric nano-composite material consisting of ZnO nanostructures embedded into the matrix of 'Paper' has been developed. Providing a flexible backbone to a brittle material makes it a robust architecture. Energy harvesting by scavenging both mechanical and thermal fluctuations using this flexible nano-composite is discussed in this thesis. On the energy storage front, Graphene based materials developed with a focus towards realizing ultra-thin lithium ion batteries and supercapacitors are introduced. Efforts for enhancing the energy storage performance of such graphitic carbon are detailed. Increasing the rate capability by direct CVD synthesis of graphene on current collectors, enhancing its electrochemical capacity through doping and engineering 3D metallic structures to increase the areal energy density have been studied.

Energy Harvesting for Structural Health Monitoring Sensor Networks

Energy Technology Data Exchange (ETDEWEB)

Park, G.; Farrar, C. R.; Todd, M. D.; Hodgkiss, T.; Rosing, T.

2007-02-26

This report has been developed based on information exchanges at a 2.5-day workshop on energy harvesting for embedded structural health monitoring (SHM) sensing systems that was held June 28-30, 2005, at Los Alamos National Laboratory. The workshop was hosted by the LANL/UCSD Engineering Institute (EI). This Institute is an education- and research-focused collaboration between Los Alamos National Laboratory (LANL) and the University of California, San Diego (UCSD), Jacobs School of Engineering. A Statistical Pattern Recognition paradigm for SHM is first presented and the concept of energy harvesting for embedded sensing systems is addressed with respect to the data acquisition portion of this paradigm. Next, various existing and emerging sensing modalities used for SHM and their respective power requirements are summarized, followed by a discussion of SHM sensor network paradigms, power requirements for these networks and power optimization strategies. Various approaches to energy harvesting and energy storage are discussed and limitations associated with the current technology are addressed. This discussion also addresses current energy harvesting applications and system integration issues. The report concludes by defining some future research directions and possible technology demonstrations that are aimed at transitioning the concept of energy harvesting for embedded SHM sensing systems from laboratory research to field-deployed engineering prototypes.

Energy Harvesting Cycles of Dielectric ElectroActive Polymer Generators

DEFF Research Database (Denmark)

Dimopoulos, Emmanouil; Trintis, Ionut; Munk-Nielsen, Stig

2012-01-01

Energy harvesting via Dielectric ElectroActive Polymer (DEAP) generators has attracted much of the scientific interest over the past few years, mainly due to the advantages that these smart materials offer against competing technologies, as electromagnetic generators and piezoelectrics. Their hig......Energy harvesting via Dielectric ElectroActive Polymer (DEAP) generators has attracted much of the scientific interest over the past few years, mainly due to the advantages that these smart materials offer against competing technologies, as electromagnetic generators and piezoelectrics....... Their higher energy density, superior low-speed performance, light-weighted nature as well as their shapely structure have rendered DEAPs candidate solutions for various actuation and energy harvesting applications. In this paper, a thoroughly analysis of all energy harvesting operational cycles of a DEAP...

Terra Harvest software architecture

Science.gov (United States)

Humeniuk, Dave; Klawon, Kevin

2012-06-01

Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

Antagonistic properties of Trichoderma viride on post harvest ...

African Journals Online (AJOL)

The effective in vitro screening tests of Trichoderma viride for antagonism against post harvest pathogens of cassava roots (Manihot esculenta Crantz) rot together with its competitive and mycoparasitic abilities informs its selection as the most promising candidate for the biocontrol of post harvest cassava root rot pathogens.

Toward sustainable harvesting of Africa's largest medicinal plant ...

African Journals Online (AJOL)

Global demand for treating prostate disorders with Prunus africana bark extract has made P. africana Africa's largest medicinal plant export. Unsustainable harvesting practices can lead to local extirpations of this multipurpose tree. Survey research targeting P. africana harvesters in a Tanzania forest reserve revealed that ...

Finite element modeling of nonlinear piezoelectric energy harvesters with magnetic interaction

International Nuclear Information System (INIS)

Upadrashta, Deepesh; Yang, Yaowen

2015-01-01

Piezoelectric energy harvesting from ambient vibrations is a potential technology for powering wireless sensors and low power electronic devices. The conventional linear harvesters suffer from narrow operational bandwidth. Many attempts have been made especially using the magnetic interaction to broaden the bandwidth of harvesters. The finite element (FE) modeling has been used only for analyzing the linear harvesters in the literature. The main difficulties in extending the FE modeling to analyze the nonlinear harvesters involving magnetic interaction are developing the mesh needed for magnetic interaction in dynamic problems and the high demand on computational resource needed for solving the coupled electrical–mechanical–magnetic problem. In this paper, an innovative method is proposed to model the magnetic interaction without inclusion of the magnetic module. The magnetic force is modeled using the nonlinear spring element available in ANSYS finite element analysis (FEA) package, thus simplifying the simulation of nonlinear piezoelectric energy harvesters as an electromechanically coupled problem. Firstly, an FE model of a monostable nonlinear harvester with cantilever configuration is developed and the results are validated with predictions from the theoretical model. Later, the proposed technique of FE modeling is extended to a complex 2-degree of freedom nonlinear energy harvester for which an accurate analytical model is difficult to derive. The performance predictions from FEA are compared with the experimental results. It is concluded that the proposed modeling technique is able to accurately analyze the behavior of nonlinear harvesters with magnetic interaction. (paper)

Energy harvesting solar, wind, and ocean energy conversion systems

CERN Document Server

Khaligh, Alireza

2009-01-01

Also called energy scavenging, energy harvesting captures, stores, and uses ""clean"" energy sources by employing interfaces, storage devices, and other units. Unlike conventional electric power generation systems, renewable energy harvesting does not use fossil fuels and the generation units can be decentralized, thereby significantly reducing transmission and distribution losses. But advanced technical methods must be developed to increase the efficiency of devices in harvesting energy from environmentally friendly, ""green"" resources and converting them into electrical energy.Recognizing t

Iron oxides and quality of organic matter in sugarcane harvesting systems

Directory of Open Access Journals (Sweden)

Diogo Mazza Barbieri

2014-08-01

Full Text Available Improvements in working conditions, sustainable production, and competitiveness have led to substantial changes in sugarcane harvesting systems. Such changes have altered a number of soil properties, including iron oxides and organic matter, as well as some chemical properties, such as the maximum P adsorption capacity of the soil. The aim of this study was to characterize the relationship between iron oxides and the quality of organic matter in sugarcane harvesting systems. For that purpose, two 1 ha plots in mechanically and manually harvested fields were used to obtain soil samples from the 0.00-0.25 m soil layer at 126 different points. The mineralogical, chemical, and physical results were subjected to descriptive statistical analyses, such as the mean comparison test, as well as to multivariate statistical and principal component analyses. Multivariate tests allowed soil properties to be classified in two different groups according to the harvesting method: manual harvest with the burning of residual cane, and mechanical harvest without burning. The mechanical harvesting system was found to enhance pedoenvironmental conditions, leading to changes in the crystallinity of iron oxides, an increase in the humification of organic matter, and a relative decrease in phosphorus adsorption in this area compared to the manual harvesting system.

Effect of harvest time on storage loss and sprouting in onion

Directory of Open Access Journals (Sweden)

T. SUOJALA

2008-12-01

Full Text Available Storability of onion is affected by timing of harvest. However, the optimal time for maximum yield and maximum storability do not necessarily coincide. This study aimed to determine the most suitable harvest time for obtaining a high bulb yield with high quality and storability. Storage experiments were conducted on onions produced in field experiments at a research field and on farms in four years. Results indicate that harvesting could be delayed to 100% maturity, or even longer, without a marked increase in storage loss. In rainy years, late harvest is likely to impair the quality. The incidence of sprouting in shelf life tests varied considerably between years. An early harvest before 50% maturity and a delayed harvest increased the risk of sprouting. It may be concluded that the harvesting of onions for long-term storage can be timed to take place between 50% maturity and even some weeks after complete maturity without a loss in storage quality. Therefore, it is possible to combine high yield and good storage quality.

Harvesting and replenishment policies for renewable natural resources

Science.gov (United States)

Douglas, Aaron J.; Johnson, Richard L.

1993-01-01

The current paper links the optimal intertemporal use of renewable natural resources to the harvesting activities of various economic agents. Previous contributions cite market forces as a causative factor inducing the extirpation of renewable natural resources. The analysis given here discusses investment in the stock of renewable resources and cites important examples of this activity. By introducing joint harvesting and replenishment strategies into a model of renewable resource use, the analysis adds descriptive reality and relevance to positive and normative discussions of renewable natural resource use. A high price for the yield or a high discount rate tend to diminish the size of the optimum stationary stock of the resource with a non-replenishment harvesting strategy. Optimal non-replenishment harvesting strategies for renewable natural resources will exhaustion or extirpation of the resource if the price of the yield or the discount rate are sufficiently large. However, the availability of a replenishment technology and the use of replenishment activities tends to buffer the resource against exhaustion or extirpation.

Innovative thermal energy harvesting for future autonomous applications

Science.gov (United States)

Monfray, Stephane

2013-12-01

As communicating autonomous systems market is booming, the role of energy harvesting will be a key enabler. As example, heat is one of the most abundant energy sources that can be converted into electricity in order to power circuits. Harvesting systems that use wasted heat open new ways to power autonomous sensors when the energy consumption is low, or to create systems of power generators when the conversion efficiency is high. The combination of different technologies (low power μ-processors, μ-batteries, radio, sensors...) with new energy harvesters compatible with large varieties of use-cases with allow to address this booming market. Thanks to the conjunction of ultra-low power electronic development, 3D technologies & Systems in Package approaches, the integration of autonomous sensors and electronics with ambient energy harvesting will be achievable. The applications are very wide, from environment and industrial sensors to medical portable applications, and the Internet of things may also represent in the future a several billions units market.

Innovative thermal energy harvesting for future autonomous applications

International Nuclear Information System (INIS)

Monfray, Stephane

2013-01-01

As communicating autonomous systems market is booming, the role of energy harvesting will be a key enabler. As example, heat is one of the most abundant energy sources that can be converted into electricity in order to power circuits. Harvesting systems that use wasted heat open new ways to power autonomous sensors when the energy consumption is low, or to create systems of power generators when the conversion efficiency is high. The combination of different technologies (low power μ-processors, μ-batteries, radio, sensors...) with new energy harvesters compatible with large varieties of use-cases with allow to address this booming market. Thanks to the conjunction of ultra-low power electronic development, 3D technologies and Systems in Package approaches, the integration of autonomous sensors and electronics with ambient energy harvesting will be achievable. The applications are very wide, from environment and industrial sensors to medical portable applications, and the Internet of things may also represent in the future a several billions units market

On the performance of piezoelectric harvesters loaded by finite width impulses

Science.gov (United States)

Doria, A.; Medè, C.; Desideri, D.; Maschio, A.; Codecasa, L.; Moro, F.

2018-02-01

The response of cantilevered piezoelectric harvesters loaded by finite width impulses of base acceleration is studied analytically in the frequency domain in order to identify the parameters that influence the generated voltage. Experimental tests are then performed on harvesters loaded by hammer impacts. The latter are used to confirm analytical results and to validate a linear finite element (FE) model of a unimorph harvester. The FE model is, in turn, used to extend analytical results to more general harvesters (tapered, inverse tapered, triangular) and to more general impulses (heel strike in human gait). From analytical and numerical results design criteria for improving harvester performance are obtained.

Modelling of a bridge-shaped nonlinear piezoelectric energy harvester

International Nuclear Information System (INIS)

Gafforelli, G; Corigliano, A; Xu, R; Kim, S G

2013-01-01

Piezoelectric MicroElectroMechanical Systems (MEMS) energy harvesting is an attractive technology for harvesting small magnitudes of energy from ambient vibrations. Increasing the operating frequency bandwidth of such devices is one of the major issues for real world applications. A MEMS-scale doubly clamped nonlinear beam resonator is designed and developed to demonstrate very wide bandwidth and high power density. In this paper a first complete theoretical discussion of nonlinear resonating piezoelectric energy harvesting is provided. The sectional behaviour of the beam is studied through the Classical Lamination Theory (CLT) specifically modified to introduce the piezoelectric coupling and nonlinear Green-Lagrange strain tensor. A lumped parameter model is built through Rayleigh-Ritz Method and the resulting nonlinear coupled equations are solved in the frequency domain through the Harmonic Balance Method (HBM). Finally, the influence of external load resistance on the dynamic behaviour is studied. The theoretical model shows that nonlinear resonant harvesters have much wider power bandwidth than that of linear resonators but their maximum power is still bounded by the mechanical damping as is the case for linear resonating harvesters

Energy harvesting: small scale energy production from ambient sources

Science.gov (United States)

Yeatman, Eric M.

2009-03-01

Energy harvesting - the collection of otherwise unexploited energy in the local environment - is attracting increasing attention for the powering of electronic devices. While the power levels that can be reached are typically modest (microwatts to milliwatts), the key motivation is to avoid the need for battery replacement or recharging in portable or inaccessible devices. Wireless sensor networks are a particularly important application: the availability of essentially maintenance free sensor nodes, as enabled by energy harvesting, will greatly increase the feasibility of large scale networks, in the paradigm often known as pervasive sensing. Such pervasive sensing networks, used to monitor buildings, structures, outdoor environments or the human body, offer significant benefits for large scale energy efficiency, health and safety, and many other areas. Sources of energy for harvesting include light, temperature differences, and ambient motion, and a wide range of miniature energy harvesters based on these sources have been proposed or demonstrated. This paper reviews the principles and practice in miniature energy harvesters, and discusses trends, suitable applications, and possible future developments.

High-efficiency passive full wave rectification for electromagnetic harvesters

Science.gov (United States)

Yilmaz, Mehmet; Tunkar, Bassam A.; Park, Sangtak; Elrayes, Karim; Mahmoud, Mohamed A. E.; Abdel-Rahman, Eihab; Yavuz, Mustafa

2014-10-01

We compare the performance of four types of full-wave bridge rectifiers designed for electromagnetic energy harvesters based on silicon diodes, Schottky diodes, passive MOSFETs, and active MOSFETs. Simulation and experimental results show that MOSFET-type rectifiers are more efficient than diode-type rectifiers, reaching voltage and power efficiency of 99% for ideal voltage source with input amplitudes larger than 800 mV. Since active MOSFETs require extra components and an external DC power supply, we conclude that passive MOSFETs are superior for micro-power energy harvesting systems. We demonstrate passive MOSFET rectifiers implemented using discrete, off-shelf components and show that they outperform all electromagnetic harvester rectifiers hitherto reported obtaining a power efficiency of 95%. Furthermore, we show that passive MOSFET rectifiers do not affect the center frequency, harvesting bandwidth, or optimal resistance of electromagnetic harvesters. We demonstrate a complete power management module by adding a capacitor to the rectifier output terminal. We found that this configuration changed the optimal resistive load from 40 Ω to 55 Ω and decreased output power efficiency to 86%.

Revealing Linear Aggregates of Light Harvesting Antenna Proteins in Photosynthetic Membranes

OpenAIRE

He, Yufan; Zeng, Xiaohua; Mukherjee, Saptarshi; Rajapaksha, Suneth; Kaplan, Samuel; Lu, H. Peter

2010-01-01

How light energy is harvested in a natural photosynthetic membrane through energy transfer is closely related to the stoichiometry and arrangement of light harvesting antenna proteins in the membrane. The specific photosynthetic architecture facilitates a rapid and efficient energy transfer among the light harvesting proteins (LH2 and LH1) and to the reaction center. Here we report the identification of linear aggregates of light harvesting proteins, LH2, in the photosynthetic membranes under...

Relay Selection for Cooperative Relaying in Wireless Energy Harvesting Networks

Science.gov (United States)

Zhu, Kaiyan; Wang, Fei; Li, Songsong; Jiang, Fengjiao; Cao, Lijie

2018-01-01

Energy harvesting from the surroundings is a promising solution to provide energy supply and extend the life of wireless sensor networks. Recently, energy harvesting has been shown as an attractive solution to prolong the operation of cooperative networks. In this paper, we propose a relay selection scheme to optimize the amplify-and-forward (AF) cooperative transmission in wireless energy harvesting cooperative networks. The harvesting energy and channel conditions are considered to select the optimal relay as cooperative relay to minimize the outage probability of the system. Simulation results show that our proposed relay selection scheme achieves better outage performance than other strategies.

Harvester development for new high yielding SRC crops and markets

International Nuclear Information System (INIS)

2005-12-01

Details are given of a project to develop a harvesting system that can produce fuel economically in a single pass to a required specification at a cost that is profitable for the grower while minimising the cost of the product. The project objectives listed include the development of a harvester drive chain and feeding systems to allow harvesting of the higher yielding crops now produced in the UK, determination of the most economic harvesting cycle for SRC crops, and production of fuels suitable for co-firing with coal in pulverised fuel systems or for gasification. The work programme and project conclusions are discussed

Energy harvesting water vehicle

KAUST Repository

Singh, Devendra

2018-01-01

An efficient energy harvesting (EEH) water vehicle is disclosed. The base of the EEH water vehicle is fabricated with rolling cylindrical drums that can rotate freely in the same direction of the water medium. The drums reduce the drag

Thermoelectrics and its energy harvesting

National Research Council Canada - National Science Library

Rowe, David Michael

2012-01-01

.... It details the latest techniques for the preparation of thermoelectric materials employed in energy harvesting, together with advances in the thermoelectric characterisation of nanoscale material...

Evaluation of harvest and information needs for North American sea ducks.

Directory of Open Access Journals (Sweden)

Mark D Koneff

Full Text Available Wildlife managers routinely seek to establish sustainable limits of sport harvest or other regulated forms of take while confronted with considerable uncertainty. A growing body of ecological research focuses on methods to describe and account for uncertainty in management decision-making and to prioritize research and monitoring investments to reduce the most influential uncertainties. We used simulation methods incorporating measures of demographic uncertainty to evaluate risk of overharvest and prioritize information needs for North American sea ducks (Tribe Mergini. Sea ducks are popular game birds in North America, yet they are poorly monitored and their population dynamics are poorly understood relative to other North American waterfowl. There have been few attempts to assess the sustainability of harvest of North American sea ducks, and no formal harvest strategy exists in the U.S. or Canada to guide management. The popularity of sea duck hunting, extended hunting opportunity for some populations (i.e., special seasons and/or bag limits, and population declines have led to concern about potential overharvest. We used Monte Carlo simulation to contrast estimates of allowable harvest and observed harvest and assess risk of overharvest for 7 populations of North American sea ducks: the American subspecies of common eider (Somateria mollissima dresseri, eastern and western populations of black scoter (Melanitta americana and surf scoter (M. perspicillata, and continental populations of white-winged scoter (M. fusca and long-tailed duck (Clangula hyemalis. We combined information from empirical studies and the opinions of experts through formal elicitation to create probability distributions reflecting uncertainty in the individual demographic parameters used in this assessment. Estimates of maximum growth (rmax, and therefore of allowable harvest, were highly uncertain for all populations. Long-tailed duck and American common eider appeared

Sustainability of corn stover harvest strategies in Pennsylvania

Science.gov (United States)

Pennsylvania has a long history of harvesting corn stover after grain harvest for animal bedding and feed or as a component of mushroom compost, or as silage for dairy cattle feed. With the shallow soils and rolling topography, soil erosion and carbon losses have been minimized through extensive use...

Endoscopic Radial Artery Harvest for Coronary Artery Bypass Surgery

Directory of Open Access Journals (Sweden)

Kuan-Ming Chiu

2006-01-01

Conclusion: Endoscopic harvest of the radial artery is technically demanding, but excellent results can be achieved. The endoscopic approach can provide suitable conduits in a less invasive way than the open harvest technique.

Harvesting soil with potatoes

DEFF Research Database (Denmark)

Egelyng, Henrik

2017-01-01

Norwegian authorities demand soil leaving potato packing plants to be deposited as waste. Depositing soil from potato processing plants is associated with significant cost for Norwegian producers. Therefore CYCLE investigated potato soil harvesting from an innovation and socio-economic perspective....

An evaluation of harvesting machinery for short rotation coppice willow in Denmark

Energy Technology Data Exchange (ETDEWEB)

Kofman, P.D.; Spinelli, R.

1997-12-31

During the harvesting seasons 1994-1995 and 1995-1996 several harvesting trials were carried out within the EU project on harvesting and storage of Short Rotation Crops and within a national project. During this period the following machines were investigated: Diemelstadt poplar harvester, cut and chip; Claas forage harvester with SRF header, cut and chip; Austoft sugarcane harvester, adapted to SRF, cut and chip; Bender II, cut and chip; Hvidsted Energy Allrounder, whole shoot harvester; Dansalix whole shoot harvester. In the 1994-1995 season the intention was to harvest 300 tonnes of whole shoots, chunks and chips for a storage trial. The main conclusions of the 1994-1995 harvesting season must be that harvesting willow with the existing machines in wet winters without frozen ground is very difficult. The machines will have to be developed further and special interest should be given to developing shuttle vehicles with the same flotation as the tracked harvester. Several of the problems encountered with the machines in Denmark were confirmed by the experience in the other trials. Road transportation of chips from SRF plantations is just as expensive as transporting energy chips from the forest at about Dkr 50 per tonne over 48 km. Transporting whole shoots is very expensive due to the low bulk density. Transportation of whole shoots over 48 km costs on the average Dkr 133 per tonne fresh. A very short pilot study into chipping of whole shoots from a three metre high pile indicated that this comminution with a normal forest chipper has a low productivity (8.9 tonnes fresh per work place hour) and is very expensive at Dkr 157 per tonne. This productivity can be improved by equipping the chipper with a special feeding table and better feed rollers for the SRF crop. (EG)

Energy harvesting influences electrochemical performance of microbial fuel cells

Science.gov (United States)

Lobo, Fernanda Leite; Wang, Xin; Ren, Zhiyong Jason

2017-07-01

Microbial fuel cells (MFCs) can be effective power sources for remote sensing, wastewater treatment and environmental remediation, but their performance needs significant improvement. This study systematically analyzes how active harvesting using electrical circuits increased MFC system outputs as compared to passive resistors not only in the traditional maximal power point (MPP) but also in other desired operating points such as the maximum current point (MCP) and the maximum voltage point (MVP). Results show that active harvesting in MPP increased power output by 81-375% and active harvesting in MCP increased Coulombic efficiency by 207-805% compared with resisters operated at the same points. The cyclic voltammograms revealed redox potential shifts and supported the performance data. The findings demonstrate that active harvesting is a very effective approach to improve MFC performance across different operating points.

Nonmonotonic energy harvesting efficiency in biased exciton chains

NARCIS (Netherlands)

Vlaming, S.M.; Malyshev, V.A.; Knoester, J.

2007-01-01

We theoretically study the efficiency of energy harvesting in linear exciton chains with an energy bias, where the initial excitation is taking place at the high-energy end of the chain and the energy is harvested (trapped) at the other end. The efficiency is characterized by means of the average

The Effect of Urban Sprawls on Timber Harvesting

Science.gov (United States)

Stephen A. Barlow; Ian A Munn; David A. Cleaves; David L. Evans

1998-01-01

In Mississippi and Alabama, urban population growth is pushing development into rural areas. To study the impact of urbanization on timber harvesting, census and forest inventory data were combined in a geographic information system, and a logistic regression model was used to estimate the relationship between several variables and harvest probabilities....

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

Science.gov (United States)

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Nonlinear metamaterials for electromagnetic energy harvesting (Conference Presentation)

Science.gov (United States)

Oumbe Tekam, Gabin Thibaut; Ginis, Vincent; Seetharamdoo, Divitha; Danckaert, Jan

2016-09-01

Surrounded by electromagnetic radiation coming from wireless power transfer to consumer devices such as mobile phones, computers and television, our society is facing the scientific and technological challenge to recover energy that is otherwise lost to the environment. Energy harvesting is an emerging field of research focused on this largely unsolved problem, especially in the microwave regime. Metamaterials provide a very promising platform to meet this purpose. These artificial materials are made from subwavelength building blocks, and can be designed by resonate at particular frequencies, depending on their shape, geometry, size, and orientation. In this work, we show that an efficient electromagnetic energy harvester can be design by inserting a nonlinear element directly within the metamaterial unit cell, leading to the conversion of RF input power to DC charge accumulation. The electromagnetic energy harvester operating at microwave frequencies is built from a cut-wire metasurface, which operates as a quasistatic electric dipole resonator. Using the equivalent electrical circuit, we design the parameters to tune the resonance frequency of the harvester at the desired frequency, and we compare these results with numerical simulations. Finally, we discuss the efficiency of our metamaterial energy harvesters. This work potentially offers a variety of applications, for example in the telecommunications industry to charge phones, in robotics to power microrobots, and also in medicine to advance pacemakers or health monitoring sensors.

An eddy current-induced magnetic plucking for piezoelectric energy harvesting

International Nuclear Information System (INIS)

Do, Nam Ho; Baek, Yoon Su

2016-01-01

Frequency up-conversion is a very efficient method of energy harvesting in order to overcome low, non-periodic, or altered ambient vibration. In order to perform frequency up-conversion and transference of mechanical energy without contact, an eddy current-induced magnetic drag force is used. In this paper, we present a novel configuration of eddy current-induced magnetic plucking for piezoelectric energy harvesting. Our method consists of two permanent magnets, a piezoelectric beam, and a copper disk piece. We design our harvesting method to achieve loading, sudden release, and free vibration using the actuation of the piezoelectric beam through the magnetic mutual coupling between the magnet and copper disk piece. We present the principle of magnetic drag force-generation, characterize the energy harvesting performance of our harvesting method, and demonstrate our harvesting method’s capability of frequency up-conversion and transference of mechanical energy without contact under low, non-periodic, or altered ambient vibration. To that end, we describe the calculation of magnetic drag force with various geometric dimensions and material properties, model of the piezoelectric cantilever beam, comparison between estimation response and measured experiment response, and the measured voltage and power responses. (paper)

Portable Wind Energy Harvesters for Low-Power Applications: A Survey.

Science.gov (United States)

Nabavi, Seyedfakhreddin; Zhang, Lihong

2016-07-16

Energy harvesting has become an increasingly important topic thanks to the advantages in renewability and environmental friendliness. In this paper, a comprehensive study on contemporary portable wind energy harvesters has been conducted. The electrical power generation methods of portable wind energy harvesters are surveyed in three major groups, piezoelectric-, electromagnetic-, and electrostatic-based generators. The paper also takes another view of this area by gauging the required mechanisms for trapping wind flow from ambient environment. In this regard, rotational and aeroelastic mechanisms are analyzed for the portable wind energy harvesting devices. The comparison between both mechanisms shows that the aeroelastic mechanism has promising potential in producing an energy harvester in smaller scale although how to maintain the resonator perpendicular to wind flow for collecting the maximum vibration is still a major challenge to overcome for this mechanism. Furthermore, this paper categorizes the previously published portable wind energy harvesters to macro and micro scales in terms of their physical dimensions. The power management systems are also surveyed to explore the possibility of improving energy conversion efficiency. Finally some insights and research trends are pointed out based on an overall analysis of the previously published works along the historical timeline.

Issues in vibration energy harvesting

Science.gov (United States)

Zhang, Hui; Corr, Lawrence R.; Ma, Tianwei

2018-05-01

In this study, fundamental issues related to bandwidth and nonlinear resonance in vibrational energy harvesting devices are investigated. The results show that using bandwidth as a criterion to measure device performance can be misleading. For a linear device, an enlarged bandwidth is achieved at the cost of sacrificing device performance near resonance, and thus widening the bandwidth may offer benefits only when the natural frequency of the linear device cannot match the dominant excitation frequency. For a nonlinear device, since the principle of superposition does not apply, the ''broadband" performance improvements achieved for single-frequency excitations may not be achievable for multi-frequency excitations. It is also shown that a large-amplitude response based on the traditional ''nonlinear resonance" does not always result in the optimal performance for a nonlinear device because of the negative work done by the excitation, which indicates energy is returned back to the excitation. Such undesired negative work is eliminated at global resonance, a generalized resonant condition for both linear and nonlinear systems. While the linear resonance is a special case of global resonance for a single-frequency excitation, the maximum potential of nonlinear energy harvesting can be reached for multi-frequency excitations by using global resonance to simultaneously harvest energy distributed over multiple frequencies.

Shock reliability analysis and improvement of MEMS electret-based vibration energy harvesters

International Nuclear Information System (INIS)

Renaud, M; Goedbloed, M; De Nooijer, C; Van Schaijk, R; Fujita, T

2015-01-01

Vibration energy harvesters can serve as a replacement solution to batteries for powering tire pressure monitoring systems (TPMS). Autonomous wireless TPMS powered by microelectromechanical system (MEMS) electret-based vibration energy harvester have been demonstrated. The mechanical reliability of the MEMS harvester still has to be assessed in order to bring the harvester to the requirements of the consumer market. It should survive the mechanical shocks occurring in the tire environment. A testing procedure to quantify the shock resilience of harvesters is described in this article. Our first generation of harvesters has a shock resilience of 400 g, which is far from being sufficient for the targeted application. In order to improve this aspect, the first important aspect is to understand the failure mechanism. Failure is found to occur in the form of fracture of the device’s springs. It results from impacts between the anchors of the springs when the harvester undergoes a shock. The shock resilience of the harvesters can be improved by redirecting these impacts to nonvital parts of the device. With this philosophy in mind, we design three types of shock absorbing structures and test their effect on the shock resilience of our MEMS harvesters. The solution leading to the best results consists of rigid silicon stoppers covered by a layer of Parylene. The shock resilience of the harvesters is brought above 2500 g. Results in the same range are also obtained with flexible silicon bumpers, which are simpler to manufacture. (paper)

Shock reliability analysis and improvement of MEMS electret-based vibration energy harvesters

Science.gov (United States)

Renaud, M.; Fujita, T.; Goedbloed, M.; de Nooijer, C.; van Schaijk, R.

2015-10-01

Vibration energy harvesters can serve as a replacement solution to batteries for powering tire pressure monitoring systems (TPMS). Autonomous wireless TPMS powered by microelectromechanical system (MEMS) electret-based vibration energy harvester have been demonstrated. The mechanical reliability of the MEMS harvester still has to be assessed in order to bring the harvester to the requirements of the consumer market. It should survive the mechanical shocks occurring in the tire environment. A testing procedure to quantify the shock resilience of harvesters is described in this article. Our first generation of harvesters has a shock resilience of 400 g, which is far from being sufficient for the targeted application. In order to improve this aspect, the first important aspect is to understand the failure mechanism. Failure is found to occur in the form of fracture of the device’s springs. It results from impacts between the anchors of the springs when the harvester undergoes a shock. The shock resilience of the harvesters can be improved by redirecting these impacts to nonvital parts of the device. With this philosophy in mind, we design three types of shock absorbing structures and test their effect on the shock resilience of our MEMS harvesters. The solution leading to the best results consists of rigid silicon stoppers covered by a layer of Parylene. The shock resilience of the harvesters is brought above 2500 g. Results in the same range are also obtained with flexible silicon bumpers, which are simpler to manufacture.

Effects of Proof Mass Geometry on Piezoelectric Vibration Energy Harvesters

Directory of Open Access Journals (Sweden)

Abdul Hafiz Alameh

2018-05-01

Full Text Available Piezoelectric energy harvesters have proven to have the potential to be a power source in a wide range of applications. As the harvester dimensions scale down, the resonance frequencies of these devices increase drastically. Proof masses are essential in micro-scale devices in order to decrease the resonance frequency and increase the strain along the beam to increase the output power. In this work, the effects of proof mass geometry on piezoelectric energy harvesters are studied. Different geometrical dimension ratios have significant impact on the resonance frequency, e.g., beam to mass lengths, and beam to mass widths. A piezoelectric energy harvester has been fabricated and tested operating at a frequency of about 4 kHz within the audible range. The responses of various prototypes were studied, and an optimized T-shaped piezoelectric vibration energy harvester design is presented for improved performance.

Electromagnetic Power Harvester Using Wide-Angle and Polarization-Insensitive Metasurfaces

Directory of Open Access Journals (Sweden)

Xuanming Zhang

2018-03-01

Full Text Available A new wide-angle and polarization-insensitive metasurface (MS instead of traditional antenna is built as the primary ambient energy harvester in this paper. The MS is a two-dimensional energy harvesting array that is composed of subwavelength electrical small ring resonator that is working at 2.5 GHz (LTE/WiFi. In the case of different polarization and incidence angles, we demonstrate the metasurface can achieve high harvesting efficiency of 90%. The fabricated prototype of 9 × 9 MS energy harvesting array is measured, and the experimental results validate that the proposed MS has a good performance more than 80% of energy harvesting efficiency for arbitrary polarization and wide-angle incident waves. The good agreement of the simulation with the experiment results verifies the practicability and effectiveness of the proposed MS structure, which will provide a new source of supply in wireless sensor networks (WSN.

A compact ball screw based electromagnetic energy harvester for railroad application

Science.gov (United States)

Pan, Yu; Lin, Teng; Liu, Cheng; Yu, Jie; Zuo, Jianyong; Zuo, Lei

2018-03-01

To enable the smart technologies, such as the positive train controls, rail damage detection and track health monitoring on the railroad side, the electricity is required and in needed. In this paper, we proposed a novel ball-screw based electromagnetic energy harvester for railway track with mechanical-motion-rectifier (MMR) mechanism, to harvest the energy that usually dissipated and wasted during train induced track vibration. Ball screw based design reduces backlash during motion transmission, and MMR nonlinear characteristics with one way clutches makes the harvester convert the bi-direction track vibration into a generator's unidirectional rotation, which improves the transmission reliability and increases the energy harvesting efficiency. A systematic model combining train-rail-harvester was established to analyze the dynamic characteristic of the proposed railway energy, and lab and in-field tests were carried out to experimentally characterize the proposed energy harvester. In lab bench test showed the proposed harvester reached a 70% mechanical efficiency with a high sensitivity to the environment vibration. In filed test showed that a peak 7.8W phase power was achieved when a two marshaling type A metro train passed by with a 30 km/h.

Post-harvest loss reduction

NARCIS (Netherlands)

Gogh, van Bart; Boerrigter, Henry; Noordam, Maryvon; Ruben, Ruerd; Timmermans, Toine

2017-01-01

This paper was written by experts from Wageningen University & Research (WUR), representing their combined expertise on food chains, post-harvest technology, sustainability, food security, economics, and food safety. The paper was drafted at the request of the Dutch Ministry of Economic Affairs

Montana's forest products industry and timber harvest, 2004

Science.gov (United States)

Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

2008-01-01

This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

Reaping a Harvest of Hope - Continuum Magazine | NREL

Science.gov (United States)

Reaping a Harvest of Hope On May 4, 2007, an EF-5 tornado-the highest rating of tornados-tore Reaping a Harvest of Hope Five years after a devastating tornado, Greensburg, Kansas, has new energy and a city also relied on NREL's life-cycle cost analysis and its extensive energy project development and

Endovascular vein harvest: systemic carbon dioxide absorption.

Science.gov (United States)

Maslow, Andrew M; Schwartz, Carl S; Bert, Arthur; Hurlburt, Peter; Gough, Jeffrey; Stearns, Gary; Singh, Arun K

2006-06-01

Endovascular vein harvest (EDVH) requires CO(2) insufflation to expand the subcutaneous space, allowing visualization and dissection of the saphenous vein. The purpose of this study was to assess the extent of CO(2) absorption during EDVH. Prospective observational study. Single tertiary care hospital. Sixty patients (30 EDVH and 30 open-vein harvest) undergoing isolated coronary artery bypass graft surgery. Hemodynamic, procedural, and laboratory data were collected prior to (baseline), during, and at it the conclusion (final) of vein harvesting. Data were also collected during cardiopulmonary bypass (CPB). Data were compared by using t tests, analysis of variance, and correlation statistics when needed. There were significant increases in arterial CO(2) (PaCO(2), 35%) and decreases in pH (1.35%) during EDVH. These were associated with increases in heart rate, mean blood pressure, and cardiac output. Within the EDVH group, greater elevations (>10 mmHg) in PaCO2 were more likely during difficult harvest procedures, and these patients exhibited greater increase in heart rate. Elevated CO(2) persisted during CPB, requiring higher systemic gas flows and greater use of phenylephrine to maintain desired hemodynamics. EDVH was associated with systemic absorption of CO(2). Greater absorption was more likely in difficult procedures and was associated with greater hemodynamic changes requiring medical therapy.

A piezoelectric device for impact energy harvesting

International Nuclear Information System (INIS)

Jacquelin, E; Adhikari, S; Friswell, M I

2011-01-01

This paper studies a piezoelectric impact energy harvesting device consisting of two piezoelectric beams and a seismic mass. The aim of this work is to find the influence of several mechanical design parameters on the output power of such a harvester so as to optimize its performance; the electrical design parameters were not studied. To account for the dynamics of the beams, a model including the mechanical and piezoelectric properties of the system is proposed. The impacts involved in the energy harvesting process are described through a Hertzian contact law that requires a time domain simulation to solve the nonlinear equations. A transient regime and a steady-state regime have been identified and the performance of the device is characterized by the steady-state mean electrical power and the transient electrical power. The time simulations have been used to study the influence of various mechanical design parameters (seismic mass, beam length, gap, gliding length, impact location) on the performance of the system. It has been shown that the impact location is an important parameter and may be optimized only through simulation. The models and the simulation technique used in this work are general and may be used to assess any other impact energy harvesting device

Subwavelength resonant antennas enhancing electromagnetic energy harvesting

Science.gov (United States)

Oumbe Tekam, Gabin; Ginis, Vincent; Seetharamdoo, Divitha; Danckaert, Jan

2016-04-01

In this work, an electromagnetic energy harvester operating at microwave frequencies is designed based on a cut- wire metasurface. This metamaterial is known to contain a quasistatic electric dipole resonator leading to a strong resonant electric response when illuminated by electromagnetic fields.1 Starting from an equivalent electrical circuit, we analytically design the parameters of the system to tune the resonance frequency of the harvester at the desired frequency band. Subsequently, we compare these results with numerical simulations, which have been obtained using finite elements numerical simulations. Finally, we optimize the design by investigating the best arrangement for energy harvesting by coupling in parallel and in series many single layers of cut-wire metasurfaces. We also discuss the implementation of different geometries and sizes of the cut-wire metasurface for achieving different center frequencies and bandwidths.

Economic valuation of subsistence harvest of wildlife in Madagascar.

Science.gov (United States)

Golden, Christopher D; Bonds, Matthew H; Brashares, Justin S; Rasolofoniaina, B J Rodolph; Kremen, Claire

2014-02-01

Wildlife consumption can be viewed as an ecosystem provisioning service (the production of a material good through ecological functioning) because of wildlife's ability to persist under sustainable levels of harvest. We used the case of wildlife harvest and consumption in northeastern Madagascar to identify the distribution of these services to local households and communities to further our understanding of local reliance on natural resources. We inferred these benefits from demand curves built with data on wildlife sales transactions. On average, the value of wildlife provisioning represented 57% of annual household cash income in local communities from the Makira Natural Park and Masoala National Park, and harvested areas produced an economic return of U.S.$0.42 ha(-1) · year(-1). Variability in value of harvested wildlife was high among communities and households with an approximate 2 orders of magnitude difference in the proportional value of wildlife to household income. The imputed price of harvested wildlife and its consumption were strongly associated (p< 0.001), and increases in price led to reduced harvest for consumption. Heightened monitoring and enforcement of hunting could increase the costs of harvesting and thus elevate the price and reduce consumption of wildlife. Increased enforcement would therefore be beneficial to biodiversity conservation but could limit local people's food supply. Specifically, our results provide an estimate of the cost of offsetting economic losses to local populations from the enforcement of conservation policies. By explicitly estimating the welfare effects of consumed wildlife, our results may inform targeted interventions by public health and development specialists as they allocate sparse funds to support regions, households, or individuals most vulnerable to changes in access to wildlife. © 2013 Society for Conservation Biology.

Nonlinear analysis and enhancement of wing-based piezoaeroelastic energy harvesters

KAUST Repository

Abdelkefi, Abdessattar

2014-01-01

We investigate the level of harvested power from aeroelastic vibrations for an elastically mounted wing supported by nonlinear springs. The energy is harvested by attaching a piezoelectric transducer to the plunge degree of freedom. The considered wing has a low-aspect ratio and hence three dimensional aerodynamic effects cannot be neglected. To this end, the three dimensional unsteady vortex lattice method for the prediction of the unsteady aerodynamic loads is developed. A strong coupling scheme that is based on Hamming\\'s fourth-order predictor-corrector method and accounts for the interaction between the aerodynamic loads and the motion of the wing is employed. The effects of the electrical load resistance, nonlinear torsional spring and eccentricity between the elastic axis and the gravity axis on the level of the harvested power, pitch and plunge amplitudes are investigated for a range of operating wind speeds. The results show that there is a specific wind speed beyond which the pitch motion does not pick any further energy from the incident flow. As such, the displacement in the plunge direction grows significantly and causes enhanced energy harvesting. The results also show that the nonlinear torsional spring plays an important role in enhancing the level of the harvested power. Furthermore, the harvested power can be increased by an order of magnitude by properly choosing the eccentricity and the load resistance. This analysis is helpful in designing piezoaeroelastic energy harvesters that can operate optimally at specific wind speeds. © 2013 Elsevier Ltd.

Factors influencing reporting and harvest probabilities in North American geese

Science.gov (United States)

Zimmerman, G.S.; Moser, T.J.; Kendall, W.L.; Doherty, P.F.; White, Gary C.; Caswell, D.F.

2009-01-01

We assessed variation in reporting probabilities of standard bands among species, populations, harvest locations, and size classes of North American geese to enable estimation of unbiased harvest probabilities. We included reward (US10,20,30,50, or100) and control (0) banded geese from 16 recognized goose populations of 4 species: Canada (Branta canadensis), cackling (B. hutchinsii), Ross's (Chen rossii), and snow geese (C. caerulescens). We incorporated spatially explicit direct recoveries and live recaptures into a multinomial model to estimate reporting, harvest, and band-retention probabilities. We compared various models for estimating harvest probabilities at country (United States vs. Canada), flyway (5 administrative regions), and harvest area (i.e., flyways divided into northern and southern sections) scales. Mean reporting probability of standard bands was 0.73 (95 CI 0.690.77). Point estimates of reporting probabilities for goose populations or spatial units varied from 0.52 to 0.93, but confidence intervals for individual estimates overlapped and model selection indicated that models with species, population, or spatial effects were less parsimonious than those without these effects. Our estimates were similar to recently reported estimates for mallards (Anas platyrhynchos). We provide current harvest probability estimates for these populations using our direct measures of reporting probability, improving the accuracy of previous estimates obtained from recovery probabilities alone. Goose managers and researchers throughout North America can use our reporting probabilities to correct recovery probabilities estimated from standard banding operations for deriving spatially explicit harvest probabilities.

Energy harvesting from mastication forces via a smart tooth

Science.gov (United States)

Bani-Hani, Muath; Karami, M. Amin

2016-04-01

The batteries of the current pacing devices are relatively large and occupy over 60 percent of the size of pulse generators. Therefore, they cannot be placed in the subtle areas of human body. In this paper, the mastication force and the resulting tooth pressure are converted to electricity. The pressure energy can be converted to electricity by using the piezoelectric effect. The tooth crown is used as a power autonomous pulse generator. We refer to this envisioned pulse generator as the smart tooth. The smart tooth is in the form of a dental implant. A piezoelectric vibration energy harvester is designed and modeled for this purpose. The Piezoelectric based energy harvesters investigated and analyzed in this paper initially includes a single degree of freedom piezoelectric based stack energy harvester which utilizes a harvesting circuit employing the case of a purely resistive circuit. The next step is utilizing and investigating a bimorph piezoelectric beam which is integrated/embedded in the smart tooth implant. Mastication process causes the bimorph beam to buckle or return to unbuckled condition. The transitions results in vibration of the piezoelectric beam and thus generate energy. The power estimated by the two mechanisms is in the order of hundreds of microwatts. Both scenarios of the energy harvesters are analytically modeled. The exact analytical solution of the piezoelectric beam energy harvester with Euler-Bernoulli beam assumptions is presented. The electro-mechanical coupling and the geometric nonlinearities have been included in the model for the piezoelectric beam.

Dynamics of a delayed intraguild predation model with harvesting

Science.gov (United States)

Collera, Juancho A.; Balilo, Aldrin T.

2018-03-01

In [1], a delayed three-species intraguild predation (IGP) model was considered. This particular tri-trophic community module includes a predator and its prey which share a common basal resource for their sustenance [3]. Here, it is assumed that in the absence of predation, the growth of the basal resource follows the delayed logistic equation. Without delay time, the IGP model in [1] reduces to the system considered in [7] where it was shown that IGP may induce chaos even if the functional responses are linear. Meanwhile, in [2] the delayed IGP model in [1] was generalized to include harvesting. Under the assumption that the basal resource has some economic value, a constant harvesting term on the basal resource was incorporated. However, both models in [1] and [2] use the delay time as the main parameter. In this research, we studied the delayed IGP model in [1] with the addition of linear harvesting term on each of the three species. The dynamical behavior of this system is examined using the harvesting rates as main parameter. In particular, we give conditions on the existence, stability, and bifurcations of equilibrium solutions of this system. This allows us to better understand the effects of harvesting in terms of the survival or extinction of one or more species in our system. Numerical simulations are carried out to illustrate our results. In fact, we show that the chaotic behavior in [7] unfolds when the harvesting rate parameter is varied.

Decentralized Hypothesis Testing in Energy Harvesting Wireless Sensor Networks

Science.gov (United States)

Tarighati, Alla; Gross, James; Jalden, Joakim

2017-09-01

We consider the problem of decentralized hypothesis testing in a network of energy harvesting sensors, where sensors make noisy observations of a phenomenon and send quantized information about the phenomenon towards a fusion center. The fusion center makes a decision about the present hypothesis using the aggregate received data during a time interval. We explicitly consider a scenario under which the messages are sent through parallel access channels towards the fusion center. To avoid limited lifetime issues, we assume each sensor is capable of harvesting all the energy it needs for the communication from the environment. Each sensor has an energy buffer (battery) to save its harvested energy for use in other time intervals. Our key contribution is to formulate the problem of decentralized detection in a sensor network with energy harvesting devices. Our analysis is based on a queuing-theoretic model for the battery and we propose a sensor decision design method by considering long term energy management at the sensors. We show how the performance of the system changes for different battery capacities. We then numerically show how our findings can be used in the design of sensor networks with energy harvesting sensors.

Desert Beetle-Inspired Superwettable Patterned Surfaces for Water Harvesting.

Science.gov (United States)

Yu, Zhenwei; Yun, Frank F; Wang, Yanqin; Yao, Li; Dou, Shixue; Liu, Kesong; Jiang, Lei; Wang, Xiaolin

2017-09-01

With the impacts of climate change and impending crisis of clean drinking water, designing functional materials for water harvesting from fog with large water capacity has received much attention in recent years. Nature has evolved different strategies for surviving dry, arid, and xeric conditions. Nature is a school for human beings. In this contribution, inspired by the Stenocara beetle, superhydrophilic/superhydrophobic patterned surfaces are fabricated on the silica poly(dimethylsiloxane) (PDMS)-coated superhydrophobic surfaces using a pulsed laser deposition approach with masks. The resultant samples with patterned wettability demonstrate water-harvesting efficiency in comparison with the silica PDMS-coated superhydrophobic surface and the Pt nanoparticles-coated superhydrophilic surface. The maximum water-harvesting efficiency can reach about 5.3 g cm -2 h -1 . Both the size and the percentage of the Pt-coated superhydrophilic square regions on the patterned surface affect the condensation and coalescence of the water droplet, as well as the final water-harvesting efficiency. The present water-harvesting strategy should provide an avenue to alleviate the water crisis facing mankind in certain arid regions of the world. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Skin-attachable Flexible Piezoelectric Pulse Wave Energy Harvester

International Nuclear Information System (INIS)

Yoon, Sunghyun; Cho, Young-Ho

2014-01-01

We present a flexible piezoelectric generator, capable to harvest energy from human arterial pulse wave on the human wrist. Special features and advantages of the flexible piezoelectric generator include the multi-layer device design with contact windows and the simple fabrication process for the higher flexibility with the better energy harvesting efficiency. We have demonstrated the design effectiveness and the process simplicity of our skin- attachable flexible piezoelectric pulse wave energy harvester, composed of the sensitive P(VDF-TrFE) piezoelectric layer on the flexible polyimide support layer with windows. We experimentally characterize and demonstrate the energy harvesting capability of 0.2∼1.0μW in the Human heart rate range on the skin contact area of 3.71cm 2 . Additional physiological and/or vital signal monitoring devices can be fabricated and integrated on the skin attachable flexible generator, covered by an insulation layer; thus demonstrating the potentials and advantages of the present device for such applications to the flexible multi-functional selfpowered artificial skins, capable to detect physiological and/or vital signals on Human skin using the energy harvested from arterial pulse waves

A seesaw-type approach for enhancing nonlinear energy harvesting

Science.gov (United States)

Deng, Huaxia; Wang, Zhemin; Du, Yu; Zhang, Jin; Ma, Mengchao; Zhong, Xiang

2018-05-01

Harvesting sustainable mechanical energy is the ultimate objective of nonlinear energy harvesters. However, overcoming potential barriers, especially without the use of extra excitations, poses a great challenge for the development of nonlinear generators. In contrast to the existing methods, which typically modify the barrier height or utilize additional excitations, this letter proposes a seesaw-type approach to facilitate escape from potential wells by transfer of internal energy, even under low-intensity excitation. This approach is adopted in the design of a seesaw-type nonlinear piezoelectric energy harvester and the energy transfer process is analyzed by deriving expressions for the energy to reveal the working mechanism. Comparison experiments demonstrate that this approach improves energy harvesting in terms of an increase in the working frequency bandwidth by a factor of 60.14 and an increase in the maximum output voltage by a factor of 5.1. Moreover, the output power is increased by a factor of 51.3, which indicates that this approach significantly improves energy collection efficiency. This seesaw-type approach provides a welcome boost to the development of renewable energy collection methods by improving the efficiency of harvesting of low-intensity ambient mechanical energy.

Characterization of Energy Availability in RF Energy Harvesting Networks

Directory of Open Access Journals (Sweden)

Daniela Oliveira

2016-01-01

Full Text Available The multiple nodes forming a Radio Frequency (RF Energy Harvesting Network (RF-EHN have the capability of converting received electromagnetic RF signals in energy that can be used to power a network device (the energy harvester. Traditionally the RF signals are provided by high power transmitters (e.g., base stations operating in the neighborhood of the harvesters. Admitting that the transmitters are spatially distributed according to a spatial Poisson process, we start by characterizing the distribution of the RF power received by an energy harvester node. Considering Gamma shadowing and Rayleigh fading, we show that the received RF power can be approximated by the sum of multiple Gamma distributions with different scale and shape parameters. Using the distribution of the received RF power, we derive the probability of a node having enough energy to transmit a packet after a given amount of charging time. The RF power distribution and the probability of a harvester having enough energy to transmit a packet are validated through simulation. The numerical results obtained with the proposed analysis are close to the ones obtained through simulation, which confirms the accuracy of the proposed analysis.

Evaluation of harvest and information needs for North American sea ducks

Science.gov (United States)

Koneff, Mark D.; Zimmerman, Guthrie S.; Dwyer, Chris P.; Fleming, Kathleen K.; Padding, Paul I.; Devers, Patrick K.; Johnson, Fred A.; Runge, Michael C.; Roberts, Anthony J.

2017-01-01

Wildlife managers routinely seek to establish sustainable limits of sport harvest or other regulated forms of take while confronted with considerable uncertainty. A growing body of ecological research focuses on methods to describe and account for uncertainty in management decision-making and to prioritize research and monitoring investments to reduce the most influential uncertainties. We used simulation methods incorporating measures of demographic uncertainty to evaluate risk of overharvest and prioritize information needs for North American sea ducks (Tribe Mergini). Sea ducks are popular game birds in North America, yet they are poorly monitored and their population dynamics are poorly understood relative to other North American waterfowl. There have been few attempts to assess the sustainability of harvest of North American sea ducks, and no formal harvest strategy exists in the U.S. or Canada to guide management. The popularity of sea duck hunting, extended hunting opportunity for some populations (i.e., special seasons and/or bag limits), and population declines have led to concern about potential overharvest. We used Monte Carlo simulation to contrast estimates of allowable harvest and observed harvest and assess risk of overharvest for 7 populations of North American sea ducks: the American subspecies of common eider (Somateria mollissima dresseri), eastern and western populations of black scoter (Melanitta americana) and surf scoter (M. perspicillata), and continental populations of white-winged scoter (M. fusca) and long-tailed duck (Clangula hyemalis). We combined information from empirical studies and the opinions of experts through formal elicitation to create probability distributions reflecting uncertainty in the individual demographic parameters used in this assessment. Estimates of maximum growth (rmax), and therefore of allowable harvest, were highly uncertain for all populations. Long-tailed duck and American common eider appeared to be at high

Autotransplantation donor tooth site harvesting using piezosurgery

OpenAIRE

Ylikontiola, Leena P.; S?ndor, George K.

2016-01-01

Abstract Background: The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. Methods: A piezosurgical handpiece and its ...

Alaska's timber harvest and forest products industry, 2005

Science.gov (United States)

Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

2009-01-01

This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

Forest soil biology-timber harvesting relationships: a perspective

Science.gov (United States)

M. F. Jurgensen; M. J. Larsen; A. E. Harvey

1979-01-01

Timber harvesting has a pronounced effect on the soil microflora by wood removal and changing properties. This paper gives a perspective on soil biology-harvesting relationships with emphasis on the northern Rocky Mountain region. Of special significance to forest management operations are the effects of soil micro-organisms on: the availability of soil nutrients,...

Performance Study of Diagonally Segmented Piezoelectric Vibration Energy Harvester

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Eun [Catholic Univ. of Daegu, Daegu (Korea, Republic of)

2013-08-15

This study proposes a piezoelectric vibration energy harvester composed of two diagonally segmented energy harvesting units. An auxiliary structural unit is attached to the tip of a host structural unit cantilevered to a vibrating base, where the two components have beam axes in opposite directions from each other and matched short-circuit resonant frequencies. Contrary to the usual observations in two resonant frequency-matched structures, the proposed structure shows little eigenfrequency separation and yields a mode sequence change between the first two modes. These lead to maximum power generation around a specific frequency. By using commercial finite element software, it is shown that the magnitude of the output power from the proposed vibration energy harvester can be substantially improved in comparison with those from conventional cantilevered energy harvesters with the same footprint area and magnitude of a tip mass.

Hybrid Nanogenerator for Concurrently Harvesting Biomechanical and Biochemical Energy

KAUST Repository

Hansen, Benjamin J.

2010-07-27

Harvesting energy from multiple sources available in our personal and daily environments is highly desirable, not only for powering personal electronics, but also for future implantable sensor-transmitter devices for biomedical and healthcare applications. Here we present a hybrid energy scavenging device for potential in vivo applications. The hybrid device consists of a piezoelectric poly(vinylidene fluoride) nanofiber nanogenerator for harvesting mechanical energy, such as from breathing or from the beat of a heart, and a flexible enzymatic biofuel cell for harvesting the biochemical (glucose/O2) energy in biofluid, which are two types of energy available in vivo. The two energy harvesting approaches can work simultaneously or individually, thereby boosting output and lifetime. Using the hybrid device, we demonstrate a "self-powered" nanosystem by powering a ZnO nanowire UV light sensor. © 2010 American Chemical Society.

Theoretical modeling, simulation and experimental study of hybrid piezoelectric and electromagnetic energy harvester

Directory of Open Access Journals (Sweden)

Ping Li

2018-03-01

Full Text Available In this paper, performances of vibration energy harvester combined piezoelectric (PE and electromagnetic (EM mechanism are studied by theoretical analysis, simulation and experimental test. For the designed harvester, electromechanical coupling modeling is established, and expressions of vibration response, output voltage, current and power are derived. Then, performances of the harvester are simulated and tested; moreover, the power charging rechargeable battery is realized through designed energy storage circuit. By the results, it’s found that compared with piezoelectric-only and electromagnetic-only energy harvester, the hybrid energy harvester can enhance the output power and harvesting efficiency; furthermore, at the harmonic excitation, output power of harvester linearly increases with acceleration amplitude increasing; while it enhances with acceleration spectral density increasing at the random excitation. In addition, the bigger coupling strength, the bigger output power is, and there is the optimal load resistance to make the harvester output the maximal power.

Piezoelectric touch-sensitive flexible hybrid energy harvesting nanoarchitectures

International Nuclear Information System (INIS)

Choi, Dukhyun; Kim, Eok Su; Kim, Tae Sang; Lee, Sang Yoon; Choi, Jae-Young; Kim, Jong Min; Lee, Keun Young; Lee, Kang Hyuck; Kim, Sang-Woo

2010-01-01

In this work, we report a flexible hybrid nanoarchitecture that can be utilized as both an energy harvester and a touch sensor on a single platform without any cross-talk problems. Based on the electron transport and piezoelectric properties of a zinc oxide (ZnO) nanostructured thin film, a hybrid cell was designed and the total thickness was below 500 nm on a plastic substrate. Piezoelectric touch signals were demonstrated under independent and simultaneous operations with respect to photo-induced charges. Different levels of piezoelectric output signals from different magnitudes of touching pressures suggest new user-interface functions from our hybrid cell. From a signal controller, the decoupled performance of a hybrid cell as an energy harvester and a touch sensor was confirmed. Our hybrid approach does not require additional assembly processes for such multiplex systems of an energy harvester and a touch sensor since we utilize the coupled material properties of ZnO and output signal processing. Furthermore, the hybrid cell can provide a multi-type energy harvester by both solar and mechanical touching energies.

Enhancement of galloping-based wind energy harvesting by synchronized switching interface circuits

Science.gov (United States)

Zhao, Liya; Liang, Junrui; Tang, Lihua; Yang, Yaowen; Liu, Haili

2015-04-01

Galloping phenomenon has attracted extensive research attention for small-scale wind energy harvesting. In the reported literature, the dynamics and harvested power of a galloping-based energy harvesting system are usually evaluated with a resistive AC load; these characteristics might shift when a practical harvesting interface circuit is connected for extracting useful DC power. In the family of piezoelectric energy harvesting interface circuits, synchronized switching harvesting on inductor (SSHI) has demonstrated its advantage for enhancing the harvested power from existing base vibrations. This paper investigates the harvesting capability of a galloping-based wind energy harvester using SSHI interfaces, with a focus on comparing the performances of Series SSHI (S-SSHI) and Parallel SSHI (P-SSHI) with that of a standard DC interface, in terms of power at various wind speeds. The prototyped galloping-based piezoelectric energy harvester (GPEH) comprises a piezoelectric cantilever attached with a square-sectioned bluff body made of foam. Equivalent circuit model (ECM) of the GPEH is established and system-level circuit simulations with SSHI and standard interfaces are performed and validated with wind tunnel tests. The benefits of SSHI compared to standard circuit become more significant when the wind speed gets higher; while SSHI circuits lose the benefits at small wind speeds. In both experiment and simulation, the superiority of P-SSHI is confirmed while S-SSHI demands further investigation. The power output is increased by 43.75% with P-SSHI compared to the standard circuit at a wind speed of 6m/s.

An upper limb mathematical model of an oil palm harvester

Science.gov (United States)

Tumit, N. P.; Rambely, A. S.; BMT, Shamsul; Shahriman A., B.; Ng Y., G.; Deros, B. M.; Zailina, H.; Goh, Y. M.; Arumugam, Manohar; Ismail, I. A.; Abdul Hafiz A., R.

2014-09-01

The main purpose of this article is to develop a mathematical model of human body during harvesting via Kane's method. In this paper, a 2-D closed-kinematic biomechanical model that represents a harvesting movement is developed. The model of six segments consisted of upper right arm, right forearm, harvesting equipment, left forearm, upper left arm, and upper part of trunk. Finally, the inverse dynamic equations are represented in matrix form.

Portable Wind Energy Harvesters for Low-Power Applications: A Survey

OpenAIRE

Seyedfakhreddin Nabavi; Lihong Zhang

2016-01-01

Energy harvesting has become an increasingly important topic thanks to the advantages in renewability and environmental friendliness. In this paper, a comprehensive study on contemporary portable wind energy harvesters has been conducted. The electrical power generation methods of portable wind energy harvesters are surveyed in three major groups, piezoelectric-, electromagnetic-, and electrostatic-based generators. The paper also takes another view of this area by gauging the required mechan...

Demographic evidence of illegal harvesting of an endangered asian turtle.

Science.gov (United States)

Sung, Yik-Hei; Karraker, Nancy E; Hau, Billy C H

2013-12-01

Harvesting pressure on Asian freshwater turtles is severe, and dramatic population declines of these turtles are being driven by unsustainable collection for food markets, pet trade, and traditional Chinese medicine. Populations of big-headed turtle (Platysternon megacephalum) have declined substantially across its distribution, particularly in China, because of overcollection. To understand the effects of chronic harvesting pressure on big-headed turtle populations, we examined the effects of illegal harvesting on the demography of populations in Hong Kong, where some populations still exist. We used mark-recapture methods to compare demographic characteristics between sites with harvesting histories and one site in a fully protected area. Sites with a history of illegal turtle harvesting were characterized by the absence of large adults and skewed ratios of juveniles to adults, which may have negative implications for the long-term viability of populations. These sites also had lower densities of adults and smaller adult body sizes than the protected site. Given that populations throughout most of the species' range are heavily harvested and individuals are increasingly difficult to find in mainland China, the illegal collection of turtles from populations in Hong Kong may increase over time. Long-term monitoring of populations is essential to track effects of illegal collection, and increased patrolling is needed to help control illegal harvesting of populations, particularly in national parks. Because few, if any, other completely protected populations remain in the region, our data on an unharvested population of big-headed turtles serve as an important reference for assessing the negative consequences of harvesting on populations of stream turtles. Evidencia Demográfica de la Captura Ilegal de una Tortuga Asiática en Peligro. © 2013 Society for Conservation Biology.

Energy harvesting from arterial blood pressure for powering embedded brain sensors

Science.gov (United States)

Nanda, Aditya; Karami, M. Amin

2016-04-01

This paper investigates energy harvesting from arterial blood pressure via the piezoelectric effect by using a novel streaked cylinder geometry for the purpose of powering embedded micro-sensors in the brain. Initially, we look at the energy harvested by a piezoelectric cylinder placed inside an artery acted upon by blood pressure. Such an arrangement would be tantamount to constructing a stent out of piezoelectric materials. A stent is a cylinder placed in veins and arteries to prevent obstruction in blood flow. The governing equations of a conductor coated piezoelectric cylinder are obtained using Hamilton's principle. Pressure acting in arteries is radially directed and this is used to simplify the modal analysis and obtain the transfer function relating pressure to the induced voltage across the surface of the harvester. The power harvested by the cylindrical harvester is obtained for different shunt resistances. Radially directed pressure occurs elsewhere and we also look at harvesting energy from oil flow in pipelines. Although the energy harvested by the cylindrical energy harvester is significant at resonance, the natural frequency of the system is found to be very high. To decrease the natural frequency, we propose a novel streaked stent design by cutting it along the length, transforming it to a curved plate and decreasing the natural frequency. The governing equations corresponding to the new geometry are derived using Hamilton's principle and modal analysis is used to obtain the transfer function.

Historical harvests reduce neighboring old-growth basal area across a forest landscape.

Science.gov (United States)

Bell, David M; Spies, Thomas A; Pabst, Robert

2017-07-01

While advances in remote sensing have made stand, landscape, and regional assessments of the direct impacts of disturbance on forests quite common, the edge influence of timber harvesting on the structure of neighboring unharvested forests has not been examined extensively. In this study, we examine the impact of historical timber harvests on basal area patterns of neighboring old-growth forests to assess the magnitude and scale of harvest edge influence in a forest landscape of western Oregon, USA. We used lidar data and forest plot measurements to construct 30-m resolution live tree basal area maps in lower and middle elevation mature and old-growth forests. We assessed how edge influence on total, upper canopy, and lower canopy basal area varied across this forest landscape as a function of harvest characteristics (i.e., harvest size and age) and topographic conditions in the unharvested area. Upper canopy, lower canopy, and total basal area increased with distance from harvest edge and elevation. Forests within 75 m of harvest edges (20% of unharvested forests) had 4% to 6% less live tree basal area compared with forest interiors. An interaction between distance from harvest edge and elevation indicated that elevation altered edge influence in this landscape. We observed a positive edge influence at low elevations (800 m). Surprisingly, we found no or weak effects of harvest age (13-60 yr) and harvest area (0.2-110 ha) on surrounding unharvested forest basal area, implying that edge influence was relatively insensitive to the scale of disturbance and multi-decadal recovery processes. Our study indicates that the edge influence of past clearcutting on the structure of neighboring uncut old-growth forests is widespread and persistent. These indirect and diffuse legacies of historical timber harvests complicate forest management decision-making in old-growth forest landscapes by broadening the traditional view of stand boundaries. Furthermore, the consequences

Workplane Illuminance Estimation for Robust Daylight Harvesting Lighting Control

NARCIS (Netherlands)

Zhang, S.; Birru, D.

2012-01-01

Daylight harvesting lighting controls can provide significant energysavings in daylit spaces. However, their performance is affected bythe changing lighting distribution in the space due to window treatments and the sun. Such impacts reduce the field performance of daylight harvesting dimming

Hybrid Nanogenerator for Concurrently Harvesting Biomechanical and Biochemical Energy

KAUST Repository

Hansen, Benjamin J.; Liu, Ying; Yang, Rusen; Wang, Zhong Lin

2010-01-01

the beat of a heart, and a flexible enzymatic biofuel cell for harvesting the biochemical (glucose/O2) energy in biofluid, which are two types of energy available in vivo. The two energy harvesting approaches can work simultaneously or individually, thereby

Combining Post-Harvest Fish Value Chain and Social Change ...

International Development Research Centre (IDRC) Digital Library (Canada)

, they are not achieving their full potential in Africa. This project will examine interventions to reduce poverty and to improve food and nutrition security using post-harvest innovations in the fish value chain. Post-harvest handling in Zambia and ...

Sustainability of corn stover harvest strategies in Pennsylvania

Science.gov (United States)

Paul R. Adler; Benjamin M. Rau; Gregory W. Roth

2015-01-01

Pennsylvania farmers have a long history of harvesting corn (Zea mays L.) stover after grain harvest for animal bedding and feed or as a component of mushroom compost, or as silage for dairy cattle feed. With the shallow soils and rolling topography, soil erosion and carbon losses have been minimized through extensive use of cover crops, no-till, and...

Harvested wood products : basis for future methodological development

Science.gov (United States)

Kenneth E. Skog

2003-01-01

The IPCC Guidelines (IPCC 1997) provide an outline of how harvested wood could be treated in national greenhouse gas (GHG) inventories. This section shows the relation of that outline to the approaches and estimation methods to be presented in this Appendix. Wood and paper products are referred to as harvested wood products (HWP). It does not include carbon in...

Idaho's forest products industry and timber harvest, 2011

Science.gov (United States)

Eric A. Simmons; Steven W. Hayes; Todd A. Morgan; Charles E. Keegan; Chris Witt

2014-01-01

This report traces the flow of Idaho’s 2011 timber harvest through the primary industries; provides a description of the structure, capacity, and condition of Idaho’s industry; and quantifies volumes and uses of wood fiber. Historical wood products industry trends are discussed, as well as changes in harvest, production, employment, and sales.

Comparison of the dielectric electroactive polymer generator energy harvesting cycles

DEFF Research Database (Denmark)

Dimopoulos, Emmanouil; Trintis, Ionut; Munk-Nielsen, Stig

2013-01-01

The Dielectric ElectroActive Polymer (DEAP) generator energy harvesting cycles have been in the spotlight of the scientific interest for the past few years. Indeed, several articles have demonstrated thorough and comprehensive comparisons of the generator fundamental energy harvesting cycles......, namely Constant Charge (CC), Constant Voltage (CV) and Constant E-field (CE), based on averaged theoretical models. Yet, it has not been possible until present to validate the outcome of those comparisons via respective experimental results. In this paper, all three primary energy harvesting cycles...... are experimentally compared, based upon the coupling of a DEAP generator with a bidirectional non-isolated power electronic converter, by means of energy gain, energy harvesting efficiency and energy conversion efficiency....

In-field direct combustion fuel property changes of switchgrass harvested from summer to fall

Energy Technology Data Exchange (ETDEWEB)

Ogden, C.A.; Ileleji, K.E. [Department of Agricultural and Biological Engineering, Purdue University, West Lafayette, IN (United States); Johnson, K.D. [Department of Agronomy, Purdue University, West Lafayette, IN (United States); Wang, Q. [State Key Laboratory for Clean Energy Utilization, Zhejiang University, Hangzhou, 310027 (China)

2010-03-15

Switchgrass, a perennial warm-season grass and potential energy crop, is usually harvested during the time between full maturity in the fall to the following spring. During this wide harvest window, the changes in fuel properties that could occur are important for making appropriate decisions with respect to the optimum harvest time for maximum fuel quality. A field plot study was carried out to investigate the quantitative fuel properties (proximate, ultimate and mineral analyses) of switchgrass over a harvest period from crop maturity in July through November. Harvest moisture decreased from July to November and moisture was uniformly distributed in the switchgrass plant at all times in the harvest period. There were significant differences in ash, volatiles, fixed carbon and nitrogen among months of harvest. Nitrogen, ash and fixed carbon contents decreased while oxygen and volatiles increased through the harvest period. Also, there were significant differences in oxides of silicon, calcium, potassium, phosphorus and sulfur among harvest times. The concentration of oxides of potassium and sulfur decreased at the end of the harvesting period. Fouling and slagging indices decreased as harvest was delayed but remained low throughout harvest. However, the decreases are small and might not dramatically impact fouling and slagging. Overall, the results appear to favor a later harvest for switchgrass used for direct combustion. This study will benefit feedstock producers as well as biomass feedstock facility operators by providing a better understanding of how the properties of switchgrass vary over a typical harvest period and their potential effect on boiler equipment. (author)

Forest harvesting reduces the soil metagenomic potential for biomass decomposition.

Science.gov (United States)

Cardenas, Erick; Kranabetter, J M; Hope, Graeme; Maas, Kendra R; Hallam, Steven; Mohn, William W

2015-11-01

Soil is the key resource that must be managed to ensure sustainable forest productivity. Soil microbial communities mediate numerous essential ecosystem functions, and recent studies show that forest harvesting alters soil community composition. From a long-term soil productivity study site in a temperate coniferous forest in British Columbia, 21 forest soil shotgun metagenomes were generated, totaling 187 Gb. A method to analyze unassembled metagenome reads from the complex community was optimized and validated. The subsequent metagenome analysis revealed that, 12 years after forest harvesting, there were 16% and 8% reductions in relative abundances of biomass decomposition genes in the organic and mineral soil layers, respectively. Organic and mineral soil layers differed markedly in genetic potential for biomass degradation, with the organic layer having greater potential and being more strongly affected by harvesting. Gene families were disproportionately affected, and we identified 41 gene families consistently affected by harvesting, including families involved in lignin, cellulose, hemicellulose and pectin degradation. The results strongly suggest that harvesting profoundly altered below-ground cycling of carbon and other nutrients at this site, with potentially important consequences for forest regeneration. Thus, it is important to determine whether these changes foreshadow long-term changes in forest productivity or resilience and whether these changes are broadly characteristic of harvested forests.

Analytical coupled modeling of a magneto-based acoustic metamaterial harvester

Science.gov (United States)

Nguyen, H.; Zhu, R.; Chen, J. K.; Tracy, S. L.; Huang, G. L.

2018-05-01

Membrane-type acoustic metamaterials (MAMs) have demonstrated unusual capacity in controlling low-frequency sound transmission, reflection, and absorption. In this paper, an analytical vibro-acoustic-electromagnetic coupling model is developed to study MAM harvester sound absorption, energy conversion, and energy harvesting behavior under a normal sound incidence. The MAM harvester is composed of a prestressed membrane with an attached rigid mass, a magnet coil, and a permanent magnet coin. To accurately capture finite-dimension rigid mass effects on the membrane deformation under the variable magnet force, a theoretical model based on the deviating acoustic surface Green’s function approach is developed by considering the acoustic near field and distributed effective shear force along the interfacial boundary between the mass and the membrane. The accuracy and capability of the theoretical model is verified through comparison with the finite element method. In particular, sound absorption, acoustic-electric energy conversion, and harvesting coefficient are quantitatively investigated by varying the weight and size of the attached mass, prestress and thickness of the membrane. It is found that the highest achievable conversion and harvesting coefficients can reach up to 48%, and 36%, respectively. The developed model can serve as an efficient tool for designing MAM harvesters.

Ecosystem Responses to Partial Harvesting in Eastern Boreal Mixedwood Stands

Directory of Open Access Journals (Sweden)

Brian D. Harvey

2013-05-01

Full Text Available Partial harvesting has been proposed as a key aspect to implementing ecosystem management in the Canadian boreal forest. We report on a replicated experiment located in boreal mixedwoods of Northwestern Quebec. In the winter of 2000–2001, two partial harvesting treatments, one using a dispersed pattern, and a second, which created a (400 m2 gap pattern, were applied to a 90-year-old aspen-dominated mixed stand. The design also included a clear cut and a control. Over the course of the following eight years, live tree, coarse woody debris, regeneration and ground beetles were inventoried at variable intervals. Our results indicate that all harvesting treatments created conditions favorable to balsam fir (Abies balsamea sapling growth and trembling aspen (Populus tremuloides sapling recruitment. However, balsam fir and trembling aspen regeneration and ground beetles response to gap cuts were closer to patterns observed in clear cuts than in dispersed harvesting. The underlying reasons for these differing patterns can be linked to factors associated with the contrasting light regimes created by the two partial harvesting treatments. The study confirms that partially harvesting is an ecologically sound approach in boreal mixedwoods and could contribute to maintaining the distribution of stand ages at the landscape level.

Portable Wind Energy Harvesters for Low-Power Applications: A Survey

Directory of Open Access Journals (Sweden)

Seyedfakhreddin Nabavi

2016-07-01

Full Text Available Energy harvesting has become an increasingly important topic thanks to the advantages in renewability and environmental friendliness. In this paper, a comprehensive study on contemporary portable wind energy harvesters has been conducted. The electrical power generation methods of portable wind energy harvesters are surveyed in three major groups, piezoelectric-, electromagnetic-, and electrostatic-based generators. The paper also takes another view of this area by gauging the required mechanisms for trapping wind flow from ambient environment. In this regard, rotational and aeroelastic mechanisms are analyzed for the portable wind energy harvesting devices. The comparison between both mechanisms shows that the aeroelastic mechanism has promising potential in producing an energy harvester in smaller scale although how to maintain the resonator perpendicular to wind flow for collecting the maximum vibration is still a major challenge to overcome for this mechanism. Furthermore, this paper categorizes the previously published portable wind energy harvesters to macro and micro scales in terms of their physical dimensions. The power management systems are also surveyed to explore the possibility of improving energy conversion efficiency. Finally some insights and research trends are pointed out based on an overall analysis of the previously published works along the historical timeline.

A detrimental soil disturbance prediction model for ground-based timber harvesting

Science.gov (United States)

Derrick A. Reeves; Matthew C. Reeves; Ann M. Abbott; Deborah S. Page-Dumroese; Mark D. Coleman

2012-01-01

Soil properties and forest productivity can be affected during ground-based harvest operations and site preparation. The degree of impact varies widely depending on topographic features and soil properties. Forest managers who understand site-specific limits to ground-based harvesting can alter harvest method or season to limit soil disturbance. To determine the...

Factors affecting unintentional harvesting selectivity in a monomorphic species.

Science.gov (United States)

Bunnefeld, Nils; Baines, David; Newborn, David; Milner-Gulland, E J

2009-03-01

1. Changes in the abundance of populations have always perplexed ecologists but long-term studies are revealing new insights into population dynamic processes. Long-term data are often derived from harvest records although many wild populations face high harvesting pressures leading to overharvesting and extinction. Additionally, harvest records used to describe population processes such as fluctuations in abundance and reproductive success often assume a random off-take. 2. Selective harvesting based on phenotypic characteristics occurs in many species (e.g. trophy hunting, fisheries) and has important implications for population dynamics, conservation and management. 3. In species with no marked morphological differences between the age and sex classes, such as the red grouse Lagopus lagopus scoticus during the shooting season, hunters cannot consciously select for a specific sex or age class during the shooting process but harvest records could still give a biased reflection of the population structure because of differences in behaviour between age and sex classes. 4. This study compared age and sex ratios in the bag with those in the population before shooting for red grouse at different points in the shooting season and different densities, which has rarely been tested before. 5. More young than old grouse were shot at large bag sizes and vice versa for small bag sizes than would be expected from the population composition before shooting. The susceptibility of old males to shooting compared to females increased with bag size and was high at the first time the area was shot but decreased with the number of times an area was harvested. 6. These findings stress that the assumption made in many studies that harvest records reflect the age and sex ratio of the population and therefore reflect productivity can be misleading. 7. In this paper, as in the literature, it is also shown that number of grouse shot reflects grouse density and therefore that hunting

Adjustable Nonlinear Springs to Improve Efficiency of Vibration Energy Harvesters

OpenAIRE

Boisseau, S.; Despesse, G.; Seddik, B. Ahmed

2012-01-01

Vibration Energy Harvesting is an emerging technology aimed at turning mechanical energy from vibrations into electricity to power microsystems of the future. Most of present vibration energy harvesters are based on a mass spring structure introducing a resonance phenomenon that allows to increase the output power compared to non-resonant systems, but limits the working frequency bandwidth. Therefore, they are not able to harvest energy when ambient vibrations' frequencies shift. To follow sh...

Resource management for energy and spectrum harvesting sensor networks

CERN Document Server

Zhang, Deyu; Zhou, Haibo; Shen, Xuemin (Sherman)

2017-01-01

This SpringerBrief offers a comprehensive review and in-depth discussion of the current research on resource management. The authors explain how to best utilize harvested energy and temporally available licensed spectrum. Throughout the brief, the primary focus is energy and spectrum harvesting sensor networks (ESHNs) including energy harvesting (EH)-powered spectrum sensing and dynamic spectrum access. To efficiently collect data through the available licensed spectrum, this brief examines the joint management of energy and spectrum. An EH-powered spectrum sensing and management scheme for Heterogeneous Spectrum Harvesting Sensor Networks (HSHSNs) is presented in this brief. The scheme dynamically schedules the data sensing and spectrum access of sensors in ESHSNs to optimize the network utility, while considering the stochastic nature of EH process, PU activities and channel conditions. This brief also provides useful insights for the practical resource management scheme design for ESHSNs and motivates a ne...

The effect of roofing material on the quality of harvested rainwater.

Science.gov (United States)

Mendez, Carolina B; Klenzendorf, J Brandon; Afshar, Brigit R; Simmons, Mark T; Barrett, Michael E; Kinney, Kerry A; Kirisits, Mary Jo

2011-02-01

Due to decreases in the availability and quality of traditional water resources, harvested rainwater is increasingly used for potable and non-potable purposes. In this study, we examined the effect of conventional roofing materials (i.e., asphalt fiberglass shingle, Galvalume(®) metal, and concrete tile) and alternative roofing materials (i.e., cool and green) on the quality of harvested rainwater. Results from pilot-scale and full-scale roofs demonstrated that rainwater harvested from any of these roofing materials would require treatment if the consumer wanted to meet United States Environmental Protection Agency primary and secondary drinking water standards or non-potable water reuse guidelines; at a minimum, first-flush diversion, filtration, and disinfection are recommended. Metal roofs are commonly recommended for rainwater harvesting applications, and this study showed that rainwater harvested from metal roofs tends to have lower concentrations of fecal indicator bacteria as compared to other roofing materials. However, concrete tile and cool roofs produced harvested rainwater quality similar to that from the metal roofs, indicating that these roofing materials also are suitable for rainwater harvesting applications. Although the shingle and green roofs produced water quality comparable in many respects to that from the other roofing materials, their dissolved organic carbon concentrations were very high (approximately one order of magnitude higher than what is typical for a finished drinking water in the United States), which might lead to high concentrations of disinfection byproducts after chlorination. Furthermore the concentrations of some metals (e.g., arsenic) in rainwater harvested from the green roof suggest that the quality of commercial growing media should be carefully examined if the harvested rainwater is being considered for domestic use. Hence, roofing material is an important consideration when designing a rainwater catchment. Copyright �

Evaluating the impact of sprouting conditions on the glucosinolate content of Brassica oleracea sprouts.

Science.gov (United States)

Vale, A P; Santos, J; Brito, N V; Fernandes, D; Rosa, E; Oliveira, M Beatriz P P

2015-07-01

The glucosinolates content of brassica plants is a distinctive characteristic, representing a healthy advantage as many of these compounds are associated to antioxidant and anti-carcinogenic properties. Brassica sprouts are still an underutilized source of these bioactive compounds. In this work, four varieties of brassica sprouts (red cabbage, broccoli, Galega kale and Penca cabbage), including two local varieties from the North of Portugal, were grown to evaluate the glucosinolate profile and myrosinase activity during the sprouting. Also the influence of light/darkness exposure during sprouting on the glucosinolate content was assessed. Glucosinolate content and myrosinase activity of the sprouts was evaluated by HPLC methods. All sprouts revealed a higher content of aliphatic glucosinolates than of indole glucosinolates, contrary to the profile described for most of brassica mature plants. Galega kale sprouts had the highest glucosinolate content, mainly sinigrin and glucoiberin, which are recognized for their beneficial health effects. Penca cabbage sprouts were particularly richer in glucoraphanin, who was also one of the major compounds in broccoli sprouts. Red cabbage showed a higher content of progoitrin. Regarding myrosinase activity, Galega kale sprouts showed the highest values, revealing that the use of light/dark cycles and a sprouting phase of 7-9 days could be beneficial to preserve the glucosinolate content of this variety. Copyright © 2015 Elsevier Ltd. All rights reserved.

Control of electro-chemical processes using energy harvesting materials and devices.

Science.gov (United States)

Zhang, Yan; Xie, Mengying; Adamaki, Vana; Khanbareh, Hamideh; Bowen, Chris R

2017-12-11

Energy harvesting is a topic of intense interest that aims to convert ambient forms of energy such as mechanical motion, light and heat, which are otherwise wasted, into useful energy. In many cases the energy harvester or nanogenerator converts motion, heat or light into electrical energy, which is subsequently rectified and stored within capacitors for applications such as wireless and self-powered sensors or low-power electronics. This review covers the new and emerging area that aims to directly couple energy harvesting materials and devices with electro-chemical systems. The harvesting approaches to be covered include pyroelectric, piezoelectric, triboelectric, flexoelectric, thermoelectric and photovoltaic effects. These are used to influence a variety of electro-chemical systems such as applications related to water splitting, catalysis, corrosion protection, degradation of pollutants, disinfection of bacteria and material synthesis. Comparisons are made between the range harvesting approaches and the modes of operation are described. Future directions for the development of electro-chemical harvesting systems are highlighted and the potential for new applications and hybrid approaches are discussed.

A piezoelectric energy harvester for broadband rotational excitation using buckled beam

Science.gov (United States)

Xie, Zhengqiu; Kitio Kwuimy, C. A.; Wang, Zhiguo; Huang, Wenbin

2018-01-01

This paper proposes a rotational energy harvester using a piezoelectric bistable buckled beam to harvest low-speed rotational energy. The proposed harvester consists of a piezoelectric buckled beam with a center magnet, and a rotary magnet pair with opposite magnetic poles mounted on a revolving host. The magnetic plucking is used to harvest the angular kinetic energy of the host. The nonlinear snap-through mechanism is utilized to improve the vibration displacement and output voltage of the piezoelectric layer over a wide rotation frequency range. Theoretical simulation and experimental results show that the proposed energy harvester can yield a stable average output power ranging between 6.91-48.01 μW over a rotation frequency range of 1-14 Hz across a resistance load of 110 kΩ. Furthermore, dual attraction magnets were employed to overcome the suppression phenomenon at higher frequencies, which yields a broadband and flat frequency response over 6-14 Hz with the output power reaching 42.19-65.44 μW, demonstrating the great potential of the bistable buckled beam for wideband rotation motion energy harvesting.

A piezoelectric energy harvester for broadband rotational excitation using buckled beam

Directory of Open Access Journals (Sweden)

Zhengqiu Xie

2018-01-01

Full Text Available This paper proposes a rotational energy harvester using a piezoelectric bistable buckled beam to harvest low-speed rotational energy. The proposed harvester consists of a piezoelectric buckled beam with a center magnet, and a rotary magnet pair with opposite magnetic poles mounted on a revolving host. The magnetic plucking is used to harvest the angular kinetic energy of the host. The nonlinear snap-through mechanism is utilized to improve the vibration displacement and output voltage of the piezoelectric layer over a wide rotation frequency range. Theoretical simulation and experimental results show that the proposed energy harvester can yield a stable average output power ranging between 6.91-48.01 μW over a rotation frequency range of 1-14 Hz across a resistance load of 110 kΩ. Furthermore, dual attraction magnets were employed to overcome the suppression phenomenon at higher frequencies, which yields a broadband and flat frequency response over 6-14 Hz with the output power reaching 42.19-65.44 μW, demonstrating the great potential of the bistable buckled beam for wideband rotation motion energy harvesting.

Assessment of the performance of water harvesting systems in semi-arid regions

Science.gov (United States)

Lasage, Ralph

2016-04-01

Water harvesting is widely practiced and has the potential to improve water availability for domestic and agricultural use in semi-arid regions. New funds are becoming available to stimulate the implementation of water harvesting projects, for meeting the Sustainable Development Goals and to help communities to adapt to climate change. For this, it is important to understand which factors determine the success of water harvesting techniques under different conditions. For this, we review the literature, including information on the crop yield impacts of water harvesting projects in semi-arid Africa and Asia. Results show that large water harvesting structures (> 500 m3) are less expensive than small structures, when taking into account investment costs, storage capacity and lifetimes. We also find that water harvesting improves crop yields significantly, and that the relative impact of water harvesting on crop yields is largest in low rainfall years. We also see that the governance, technical knowledge and initial investment are more demanding for the larger structures than for smaller structures, which may affect their spontaneous adoption and long term sustainability when managed by local communities. To support the selection of appropriate techniques, we present a decision framework based on case specific characteristics. This framework can also be used when reporting and evaluating the performance of water harvesting techniques, which is up to now quite limited in peer reviewed literature. Based on Bouma, J., Hegde, S.E., Lasage, R., (2016). Assessing the returns to water harvesting: A meta-analysis. Agricultural Water Management 163, 100-109. Lasage, R., Verburg P.H., (2015). Evaluation of small scale water harvesting techniques for semi-arid environments. Journal of Arid Environments 118, 48-57.

Pre-harvest treatments with fungicides and post-harvest dips in sodium bicarbonate to control postharvest decay in stone fruit.

Science.gov (United States)

D'Aquino, S; Barberis, A; Satta, D; De Pau, L; Schirra, M

2012-01-01

The objective of this study was to evaluate the effectiveness of different commercial formulations of fungicides containing one or more active ingredients in controlling postharvest decay of Thyrinthos and Boccuccia apricots, Red top peaches and Caldesi nectarines. Field treatments consisted of two sprays with cupric compounds, at the end of leaf fall and before bud swelling, one with sulfur compound, at fruit about half final size stage, and one with one of the following commercial formulations at the label suggested rates, one week before harvest: Teldor (fenexamid 50%; Bayer Crop Protection), Folicur (Tebuconazole 4.35%; Bayer Crop Protection), Signum (boscalid 26.7%, pyraclostrobin 6.7%; Basf Crop Protection), Score (difenoconazole 23.23%, Syngenta Crop Protection) and Switch (cyprodinil 37.5%, fludioxonil 25%, Syngenta Crop Protection). After harvest the fruit were stored for 1 week at 6 degrees C and 90% RH followed by 1 week at 20 degrees C and 60% RH to simulate retail conditions, or placed directly at 20 degrees C. All formulations significantly reduced decay in all cultivars. Switch, Signum and Folicur were the most active, while Score was slightly less effective. Teldor activity was low, especially in Thyrintos apricots, where the percentage of rotten fruit was slightly lower than in control fruit. Brown rot was the most representative disease, but in apricots a high percentage of fruit was affected by blue mold and grey mold. Rhizopus rot generally developed as a secondary disease on fruit previously affected by other pathogens and was more frequent in control and Teldor treated fruit. Preharvest sprays with Signum 3 days before harvest reduced postharvest decay after 1 week storage at 20 degrees C in Glo haven peaches and Venus nectarine harvested at advanced stage of maturity. Combining pre-harvest sprays with Signum and a 2-min postharvest dip in 2% sodium bicarbonate at 20 degrees C further reduced decay. In Sothern regions of Italy, the use of

Microfabrication and integration of a sol-gel PZT folded spring energy harvester.

Science.gov (United States)

Lueke, Jonathan; Badr, Ahmed; Lou, Edmond; Moussa, Walied A

2015-05-26

This paper presents the methodology and challenges experienced in the microfabrication, packaging, and integration of a fixed-fixed folded spring piezoelectric energy harvester. A variety of challenges were overcome in the fabrication of the energy harvesters, such as the diagnosis and rectification of sol-gel PZT film quality and adhesion issues. A packaging and integration methodology was developed to allow for the characterizing the harvesters under a base vibration. The conditioning circuitry developed allowed for a complete energy harvesting system, consisting a harvester, a voltage doubler, a voltage regulator and a NiMH battery. A feasibility study was undertaken with the designed conditioning circuitry to determine the effect of the input parameters on the overall performance of the circuit. It was found that the maximum efficiency does not correlate to the maximum charging current supplied to the battery. The efficiency and charging current must be balanced to achieve a high output and a reasonable output current. The development of the complete energy harvesting system allows for the direct integration of the energy harvesting technology into existing power management schemes for wireless sensing.

Analysis of factors affecting the mechanical olive harvesting in Guilan province

Directory of Open Access Journals (Sweden)

H Abedi

2017-05-01

Full Text Available Introduction Olive is one of the most valuable worldwide trees that produces useful products having high nutritional values. It is widely grown in many parts of world. The cost of olives hand picking is estimated to be about two-thirds of the total gross return of olive production. Therefore, various types of olive harvesting machineries were developed in the world. Guilan Province of Iran is one of the leading regions for olives production in Iran. At the present time, almost all olives produced in Guilan province of Iran are manually harvested. Review of the reports showed that no research was performed to study the factors affecting the development of mechanized olive picking in Guilan Province, Iran. Due to the complexity of using the olive harvest machineries, identifying the factors affecting of their application is essential. Therefore, a Delphi study were conducted to identify and analysis the drivers and barriers for mechanized olive harvest in Guilan province, Iran. Materials and Methods This research was conducted using the Delphi technique in Guilan Province, Northern Iran. Delphi technique is a structured process to gather and classify the knowledge of a group of experts. Through consultation with professors and researchers in related institutions, 22 experts from the subsidiary offices of agricultural organization of Guilan Province were selected for the study. In the first round of the study, the participants were asked to answer to two open questions about the driving factors and barriers of mechanical olive harvest in Guilan Province. Nineteen items were found as driving factors and seventeen as barriers for developing the mechanical olive harvesting in Guilan Province. In the second phase of the study, the respondents were asked to answer to the all items written in the form of a five-level Likert scale, and finally, experts of panel were asked to answer to the top 10 items of driving factors and barriers in percent form. The

Micro-scale piezoelectric vibration energy harvesting: From fixed-frequency to adaptable-frequency devices