Performance characteristics of ZLC 37 Siemens gamma camera

International Nuclear Information System (INIS)

Abdelgadir, Wafaa Abdelrahman

1994-04-01

The relationships between the ZLC 37 Siemens γ camera parameters (energy resolution, plane sensitivity, intrinsic uniformity, intrinsic resolution, system uniformity and system resolution) and diagnostic imaging performance was investigated. These parameters when computers when compared with internationally published data showed that the ZLC 37 Siemens γ cameras is in good operative conditions. The effect of the scattering media and WW on the spatial resolution, when the distance is kept fixed were investigated. Comparison of resolution for the media (air, water, water + radioactivity when using WW (10, 15,20%) showed that the resolution is best for air, better for water and worse for water + radioactivity up to a concentration of 8% for a 10% WW. (Author)

The Siemens graduate program

International Nuclear Information System (INIS)

Schaffler, I.

2001-01-01

SIEMENS is an international company acting in various domains: power generation, communication and information, traffic, health...etc. To increase flexibility and activity in a world in constant evolution, the company proposes a graduate program where young people with a special background have the possibility to start an international career in one of the different business areas. This graduate program is also very important in the domain of nuclear energy, where the know-how transfer between the previous generation and the new one is a constant point of interest. (author)

Status of SOFC development at Siemens

Energy Technology Data Exchange (ETDEWEB)

Drenckhahn, W.; Blum, L.; Greiner, H. [Siemens AG, Erlangen (Germany)

1996-12-31

The Siemens SOFC development programme reached an important milestone in June 1995. A stack operating with hydrogen and oxygen produced a peak power of 10.7 kW at a current density of 0.7 A/cm{sup 2} and was running for more than 1400 hours. The SOFC configuration is based on a flat metal separator plate using the multiple cell array design. Improved PENs, functional layer and joining technique were implemented. Based on this concept, a 100 kW plant was designed The SOFC development at Siemens has been started in 1990 after a two years preparation phase. The first period with the goal of the demonstration of a 1 kW SOFC stack operation ended in 1993. This important milestone was finally reached in the begin of 1994. The second project phase with the final milestone of a 20 kW module operation will terminate at the end of 1996. This result will form a basis for the next phase in which a 50 to 100 kW pilot plant will be built and tested.

Siemens advance PWR fuel assemblies (HTP) and cladding

International Nuclear Information System (INIS)

Stout, R. B.; Woods, K. N.

1997-01-01

This paper describes the key features of the Siemens HTP (High Thermal Performance) fuel design, the current in-reactor performance of this advanced fuel assembly design, and the advanced cladding types available

3rd August 2010 - CEO Siemens Healthcare Sector, Chief Technology Officer, Head of Corporate Technology, Member of Siemens AG Managing Board, Germany, H. Requardt, signing the guest book with CERN Director-General R. Heuer

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1008148 11: H. von Dewitz in the ATLAS Visitor centre with Collaboration member M. Hauschild (left) and Former IT Department Head W. von Rüden (right) CERN-HI-1008148 18 : Head of Innovation and Systems Projects, Siemens Healthcare Sector O. Heid (left) in the ATLAS Visitor centre with Collaboration member M. Hauschild. CERN-HI-1008148: in the ATLAS visitor centre, from left to right: Former IT Department Head W. von Rüden; ATLAS Collaboration P. Mättig; CEO Siemens Healthcare Sector, Chief Technology Officer, Head of Corporate Technology, Member of Siemens AG Managing Board, Germany, H. Requardt; Head of Innovation and Systems Projects, Siemens Healthcare Sector O. Heid; H. von Dewitz; ATLAS Collaboration member M. Hauschild.

Performance characteristics of ZLC 37 Siemens gamma camera

Energy Technology Data Exchange (ETDEWEB)

Abdelgadir, Wafaa Abdelrahman [Department of Physics, Faculty of Science, University of Khartoum, Khartoum (Sudan)

1994-04-01

The relationships between the ZLC 37 Siemens {gamma} camera parameters (energy resolution, plane sensitivity, intrinsic uniformity, intrinsic resolution, system uniformity and system resolution) and diagnostic imaging performance was investigated. These parameters when computers when compared with internationally published data showed that the ZLC 37 Siemens {gamma} cameras is in good operative conditions. The effect of the scattering media and WW on the spatial resolution, when the distance is kept fixed were investigated. Comparison of resolution for the media (air, water, water + radioactivity) when using WW (10, 15,20%) showed that the resolution is best for air, better for water and worse for water + radioactivity up to a concentration of 8% for a 10% WW. (Author) 28 refs. , 10 tabs. , 22 figs. Also available from the Department of Physics, Faculty of Science, University of Khartoum, Khartoum (SD)

Siemens Wind Power 3.6 MW wind turbines for large offshore wind farms

Energy Technology Data Exchange (ETDEWEB)

Akhmatov, Vladislav; Nygaard Nielsen, Joergen; Thisted, Jan; Groendahl, Erik; Egedal, Per; Noertoft Frydensbjerg, Michael; Jensen, Kim Hoej [Siemens Wind Power A/S, Brande (Denmark)

2008-07-01

Siemens Wind power A/S is the key player on the offshore wind power market. The Siemens Wind Power 3.6 MW variable-speed wind turbine is among the word's largest, most advanced and competitive wind turbines with a solid portfolio of large offshore wind farms. Transmission system operators and developers require dynamic wind turbine models for evaluation of fault-ride-through capability and investigations of power system stability. The even larger size of the on- and offshore wind farms has entailed that the grid impact of the voltage and frequency control capability of the wind farm can be appropriated modelled and evaluated. Siemens Wind Power has developed a dynamic model of the 3.6 MW variable-speed wind turbine with the fault-ride-through sequences and models of the voltage and frequency controllers to be applied for large offshore wind farms. The dynamic models have been implemented in the commercially available simulation tools such as DIgSILENT PowerFactory and Siemens PTI PSS/E and successfully validated from measurements. (orig.)

IMPLEMENTATION DRIVERS FOR BPR AT SIEMENS TELECOMMUNICATIONS

Directory of Open Access Journals (Sweden)

C.C. Koorts

2012-01-01

Full Text Available

ENGLISH ABSTRACT: With the embracing of neV'( management philosophies or redesigned processes, it is becoming a popular opinion that often the practical problem lies with the implementation of the new concept, rather than with the concept itself. By focussing on certain generic critical actions, chances of successful implementation increases for any new philosophy or re-engineered process. This article discusses such critical success actions, or implementation drivers as experience in a BPR project at Siemens Telecommunications.

AFRIKAANSE OPSOMMING: 'n Gewilde siening ten opsigte van die bekendstelling van nuwe bestuursfilosofiee, of implementering van herontwerpde prosesse, is dat die probleem gewoonlik Ie by die implementering daarvan, eerder as by die beginsels van die bestuursfilosofie wat geimplementeer word . Deur op generies kritieke faktore te konsentreer, kan die kanse op suksesvolle implementering van bykans enige bestuursfilosofie of herontwerpde proses verbeter word. Hierdie artikel bespreek sulke kritieke sukses aksies, of implementeringsdrywers, aan die hand van 'n gevallestudie soos ervaar in 'n BPR projek by Siemens Telecommunications.

Christ Siemens Touraine syndrome: Two case reports and felicitous approaches to prosthetic management

Directory of Open Access Journals (Sweden)

Navanith Renahan

2015-01-01

Full Text Available Ectodermal dysplasia is a heterogeneous group of inherited disorders, which exhibit a classic triad of hypohydrosis, hypotrichosis, and hypodontia. Hypohidrotic or anhidrotic ectodermal dysplasia or Christ Siemens Touraine syndrome is the most common condition among ectodermal dysplasia patients. This is a case report on two Christ Siemens Touraine syndrome cases and two different approaches to prosthetic management.

Hyperbolic projections of siemens 3d-mlc leaf paths

International Nuclear Information System (INIS)

Menzies, N.

2004-01-01

Full text: The Siemens Primus linear accelerator has the option of being fitted with a multi-leaf collimator (3D-MLC) that is marketed as having 'double focus', to achieve a constant dose penumbra for all leaf settings. This is achieved by moving the leaves through arcs (similar to some conventional collimator jaws), as well as shaping the leaf side-faces as divergent planes from the x-ray source. One consequence of the mechanical design of the 3D-MLC is that as individual leaves are moved, their projections from the light / x-ray source to the treatment plane follow paths that are hyperbolic, as shown in the figure below. (The eccentricity of the hyperbola is a function of leaf number / distance from centre.) The trajectories of the MLC leaves were modelled (in a spreadsheet) using geometrical projections of the MLC leaves to the treatment plane, with construction details provided in Siemens documentation. The results were checked against the image of the leaf in the linac light field. This problem belongs to the class of conic sections in mathematics, where the intersection of a plane with both nappes of a double right circular cone results in a hyperbola. The good agreement between the model and the light field image provided confirmation of the MLC construction details. AS/NZS 4434.1:1996 (reproduced from IEC 976:1989) provides specifications for maximum deviation from orthogonality of adjacent edges, which can be interpreted for MLC collimators to parallelism of the direction of leaf travel and the adjacent collimator edge (e.g. Elekta ATS). However for the Siemens 'double focused' MLC, it is demonstrated that the geometrical construction of the MLC militates against the leaf image being used for this kind of test. It is also demonstrated that at last one commercial treatment planning system models the Siemens leaf trajectories linearly. The clinical significance of the error in this model is shown to be negligible. Copyright (2004) Australasian College of

Results from Operational Testing of the Siemens Smart Grid-Capable Electric Vehicle Supply Equipment

Energy Technology Data Exchange (ETDEWEB)

Bennett, Brion [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

The Idaho National Laboratory conducted testing and analysis of the Siemens smart grid capable electric vehicle supply equipment (EVSE), which was a deliverable from Siemens for the U.S. Department of Energy FOA-554. The Idaho National Laboratory has extensive knowledge and experience in testing advanced conductive and wireless charging systems though INL’s support of the U.S. Department of Energy’s Advanced Vehicle Testing Activity. This document details the findings from the EVSE operational testing conducted at the Idaho National Laboratory on the Siemens smart grid capable EVSE. The testing conducted on the EVSE included energy efficiency testing, SAE J1772 functionality testing, abnormal conditions testing, and charging of a plug-in vehicle.

77 FR 34935 - Foreign-Trade Zone 161; Temporary/Interim Manufacturing Authority; Siemens Energy, Inc., (Wind...

Science.gov (United States)

2012-06-12

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket T-4-2012] Foreign-Trade Zone 161; Temporary/Interim Manufacturing Authority; Siemens Energy, Inc., (Wind Turbine Nacelles and Hubs); Notice of... temporary/interim manufacturing (T/IM) authority, on behalf of Siemens Energy, Inc., to manufacture wind...

Analysing the Outbound logistics process enhancements in Nokia-Siemens Networks Global Distribution Center

OpenAIRE

Marjeta, Katri

2011-01-01

Marjeta, Katri. 2011. Analysing the outbound logistics process enhancements in Nokia-Siemens Networks Global Distribution Center. Master´s thesis. Kemi-Tornio University of Applied Sciences. Business and Culture. Pages 57. Due to confidentiality issues, this work has been modified from its original form. The aim of this Master Thesis work is to describe and analyze the outbound logistics process enhancement projects executed in Nokia-Siemens Networks Global Distribution Center after the N...

Ichthyosis bullosa of Siemens: Response to topical tazarotene

Directory of Open Access Journals (Sweden)

Rajiv S

2006-01-01

Full Text Available In 1937, Siemens described a Dutch family with superficial blistering, flexural hyperkeratosis, and characteristic mauserung appearance. Since then, less than 20 kindreds with this condition have been described in the English dermatologic literature. A 14-year-old boy presented with history of recurrent blistering and peeling of skin since the age of 1 month, predominantly seen over limbs and trunk, often associated with secondary infection. His mother also had similar symptoms from childhood. On examination, the child had typical mauserung peeling of the skin and dirty gray hyperkeratosis in a rippled pattern over flexures. Skin biopsy from the boy showed intracorneal blistering with epidermolytic hyperkeratosis in the upper spinous layers. The typical history and clinical features along with characteristic histological findings confirmed our diagnosis of ichthyosis bullosa of Siemens. It must be differentiated from other conditions with epidermolytic hyperkeratosis and skin peeling, such as bullous ichthyosiform erythroderma of Brocq and peeling skin syndrome. Our patient responded well to 0.05% topical tazarotene gel over four weeks.

Quality assurance for MR stereotactic imaging for three Siemens scanners

International Nuclear Information System (INIS)

Kozubikova, P.; Novotny, J. Jr.; Kulhova, K.; Mihalova, P.; Tamasova, J.; Veselsk, T.

2014-01-01

Quality assurance of stereotactic imaging, especially with MRI (magnetic resonance imaging), is a complex issue. It can be divided in the basic verification and commissioning of a particular new scanner or a new scanning MRI protocol that is being implemented into a clinical practice and the routine quality assurance performed for each single radiosurgical case. The aim of this study was geometric distortion assessment in MRI with a special PTGR (Physikalisch-Technische Gesellschaft fuer Radiologie - GmbH, Tuebingen, Germany) target phantom. PTGR phantom consists of 21 three-dimensional cross-hairs filled with contrast medium. Cross hairs are positioned at known Leksell coordinates with a precision of better than 0.1 mm and covering the whole stereotactic space. The phantom can be fixed in the Leksell stereotactic frame and thus stereotactic imaging procedures can be reproduced following exactly the same steps as for a real patient, including also the stereotactic image definition in the Leksell GammaPlan. Since the geometric position (stereotactic coordinates) of each cross-hair is known based on the construction of the phantom, it can be compared with the actual measured Leksell coordinates based on the stereotactic MRI. Deviations between expected and actual coordinates provide information about the level of distortion. The measured distortions proved satisfactory accuracy precision for stereotactic localization at 1.5 T Siemens Magnetom Avanto scanner, Siemens Magnetom Symphony scanner and 3T Siemens Magnetom Skyra scanner (Na Homolce Hospital, Prague). The mean distortion for these MR scanners for standard imaging protocol (T1 weighted 3D images) were 0.8 mm, 1.1 mm and 1.1 mm and maximum distortions were 1.3 mm, 1.9 mm and 2.2 mm, respectively.There was detected dependence of the distortions on the slice orientation and the type of imaging protocol. Image distortions are also property of each particular scanner, the worst distortion were observed for 3T

Christ-Siemens-Touraine syndrome with cleft palate, absent nipples ...

African Journals Online (AJOL)

We report a 6 year old child, second in order of birth of non consanguineous Egyptian parents with typical characteristics of Christ-Siemens-Touraine syndrome. The patient had sparse light hair over the scalp, scanty eyebrows and eyelashes, a high arched cleft palate, decayed oligodontic teeth, hyperpigmentation all over ...

Siemens capabilities to perform detailed fuel inspections during short outages

International Nuclear Information System (INIS)

Knecht, K.; Reparaz, A.

1999-01-01

Fuel inspection data are used to support development activities such as corrosion resistant cladding and advanced fuel assembly designs that will reach higher burnups. Increased inspection efforts are necessary to optimize fuel management and performance strategies. Additionally, there is an increasing trend to reduce outage time in Germany and abroad. Siemens has recently developed several timesaving systems for rapid inspection of fuel assemblies and core components. Siemens' focus in developing these systems has been to obtain data in reduced reactor outage time while increasing both the volume and the quality of the measured data. Mast sipping for PWRs is used for identifying leaking fuel assemblies and allows early detection of leaks during downloading of the fuel assemblies from the reactor. An In-Core sipping system for BWRs based on a hood technique to allow testing a full core within 16 hours is under development. (authors)

SIEMENS ADVANCED QUANTRA FTICR MASS SPECTROMETER FOR ULTRA HIGH RESOLUTION AT LOW MASS

Energy Technology Data Exchange (ETDEWEB)

Spencer, W; Laura Tovo, L

2008-07-08

The Siemens Advanced Quantra Fourier Transform Ion Cyclotron Resonance (FTICR) mass spectrometer was evaluated as an alternative instrument to large double focusing mass spectrometers for gas analysis. High resolution mass spectrometers capable of resolving the common mass isomers of the hydrogen isotopes are used to provide data for accurate loading of reservoirs and to monitor separation of tritium, deuterium, and helium. Conventional double focusing magnetic sector instruments have a resolution that is limited to about 5000. The Siemens FTICR instrument achieves resolution beyond 400,000 and could possibly resolve the tritium ion from the helium-3 ion, which differ by the weight of an electron, 0.00549 amu. Working with Y-12 and LANL, SRNL requested Siemens to modify their commercial Quantra system for low mass analysis. To achieve the required performance, Siemens had to increase the available waveform operating frequency from 5 MHz to 40 MHz and completely redesign the control electronics and software. However, they were able to use the previous ion trap, magnet, passive pump, and piezo-electric pulsed inlet valve design. NNSA invested $1M in this project and acquired four systems, two for Y-12 and one each for SRNL and LANL. Siemens claimed a $10M investment in the Quantra systems. The new Siemens Advanced Quantra demonstrated phenomenal resolution in the low mass range. Resolution greater than 400,000 was achieved for mass 2. The new spectrometer had a useful working mass range to 500 Daltons. However, experiments found that a continuous single scan from low mass to high was not possible. Two useful working ranges were established covering masses 1 to 6 and masses 12 to 500 for our studies. A compromise performance condition enabled masses 1 to 45 to be surveyed. The instrument was found to have a dynamic range of about three orders of magnitude and quantitative analysis is expected to be limited to around 5 percent without using complex fitting algorithms

The role of passive and inherent safety properties in Siemens/KWU nuclear power plants

International Nuclear Information System (INIS)

Gremm, O.

1990-01-01

In Siemens/KWU Nuclear Power Plants the applied safety concept consist of a well balanced combination of active, passive use well is inherent safety measures. In principle it is not possible to realise a safety concept exclusively with inherent and/or passive safety properties. The respective measures and arguments will be explained in detail in the presentation. In addition the Siemens/KWU safety concept with examples of the role of inherent and passive safety measures will be illustrated. (author). 9 refs, 9 figs

Implementation of Siemens USS protocol into LabVIEW.

Science.gov (United States)

Hosek, P; Diblik, M

2011-10-01

This article gives basic overview of the USS protocol as a communication interface to drive Siemens frequency inverters. It presents our implementation of this protocol into LabVIEW, as there was permanent demand from the community of the users to have native LabVIEW implementation of the USS protocol. It also states encountered problems and their solutions. Copyright © 2011 Society for Laboratory Automation and Screening. Published by Elsevier Inc. All rights reserved.

Introducing life cycle thinking in product development – A case from Siemens Wind Power

DEFF Research Database (Denmark)

Bonou, Alexandra; Olsen, Stig Irving; Hauschild, Michael Zwicky

2015-01-01

How can use of LCA improve the environmental sustainability of wind industry products? An analysis of a case study from Siemens Wind Power identifies the knowledge offered by LCA that is relevant to each step of the product development process (PDP). The study illustrates the difference that this......How can use of LCA improve the environmental sustainability of wind industry products? An analysis of a case study from Siemens Wind Power identifies the knowledge offered by LCA that is relevant to each step of the product development process (PDP). The study illustrates the difference...

Siemens sees a future for IGCC - and now it has the technology

Energy Technology Data Exchange (ETDEWEB)

Schmid, C.; Hannemann, F. [Siemens Fuel Gasification Technology, Freiberg (Germany)

2007-10-15

About 18 months ago Siemens became a key player in the gasification business through its acquisition of Freiberg based Future Energy and its GSP entrained flow technology, now called SFG (Siemens Fuel Gasification). Developed at Schwarze Pumpe in Eastern Germany over many years, a particular attraction of the process is its ability to use low rank fuels such as lignite, with a robust gasifier wall concept a 'cooling screen' that avoids the use of troublesome refractories. The article explains the SFG gasifier technology. It is ideally suited for coal-fueled IGCC power plants with integrated CO{sub 2} capture, especially for low-rank fuels. SFG has been ordered or pre-selected for a number of projects in China, North America and elsewhere. 5 figs.

GOING GLOBAL — ACTING LOCAL: SIEMENS IN THE CHINESE ELECTRICAL MARKET, 1904-1937

Directory of Open Access Journals (Sweden)

Mathias Mutz

2011-01-01

Full Text Available The German electrical manufacturer Siemens has been active in the Chinese market since the 1870s and established its first office in Shanghai in 1904. Focusing on marketing, the paper analyzes Siemens' business activities in China in the period from 1904 to 1937, and argues that the company exemplified a strategy of "glocalization," i.e. combining global business objectives and local adjustments. At the same time, the growing importance of international markets affected the development of the company as a whole. Referring to the contributions of "product," "price, "place" and "promotion" to the enterprise's development, this paper emphasizes the close connection between marketing and internationalization.

Activities of the KWU training centre of SIEMENS at Karlstein

International Nuclear Information System (INIS)

Gronau, D.; Guettner, K.

1996-01-01

Siemens as turnkey supplier of nuclear and fossil power plants recognized at an early stage that besides commissioning of the plants, also the instruction and good training of the operational and the maintenance personnel is a necessary condition for safe operation of all systems and a high plant availability. Therefore it was decided to provide a KWU Training Centre of the Siemens AG being located at Karlstein/Main near the historical town Seligenstadt, about 45 km from Frankfurt airport. The advantage of this location is connected with the other activities in this place for example: central base for reactor service, including a training area with a steam generator mock-up for optimizing corresponding maintenance and repair work; technological centre for radioactive waste and contaminated components; manufacturing activities, especially in-core instrumentation; component test laboratory, especially large valve test facility; post-irradiation investigations in materials and chemical laboratories; simulator design and development. All these activities have connections to the plant operation and maintenance and can therefore reasonably be integrated in practically oriented training measures for different categories of plant personnel. 7 figs

Performance evaluation of Siemens E.Cam® Spect System at Korle ...

African Journals Online (AJOL)

Performance evaluation of Siemens E.Cam® Spect System at Korle-Bu Teaching Hospital (Ghana. ... The tests were performed according to National Electrical Manufac-turers Association protocols, and different measuring instruments and phantoms containing 99m-Tc were used. Extrinsic uniformity, System energy ...

NPI one year on [Framatome-Siemens common product

International Nuclear Information System (INIS)

Ruess, F.; Lebreton, G.

1990-01-01

Nuclear Power International (NPI), a joint subsidiary of Framatome and Siemens was established in April 1989 to coordinate the development and marketing of a common PWR technology for the world market. Both parent companies command well proven PWR technology and can rely on experience gained with over 100 000MWe of nuclear capacity in operation, under construction or on order. The technology from each is being offered through NPI until the joint PWR technology which is under development, becomes available. NPI's experience to date is reviewed. (author)

Checking the virtual treatment modality Wedge from Siemens; Verificacion de la modalidad de tratamiento virtual WEDGE de SIEMENS

Energy Technology Data Exchange (ETDEWEB)

Suero Rodrigo, M. A.; Marques Fraguela, E.

2011-07-01

The treatment modality Virtual Wedge (VW) or implemented by Siemens virtual wedge in electron linear accelerators achieved dose distributions are similar but not identical, to those obtained with physical wedges. Among the advantages against the latter is the greater ease of use, wedge factor close to one, and lower peripheral dose. However, these benefits are to be effective requires a through quality control dependence because a larger number of parameters that control the generation of the beam, the dose monitor system and the movement of the jaws of the collimator. We performed a study of the wedge taking into account different configurations that can affect their behavior from the dosimetric point of view.

The power control system of the Siemens-KWU nuclear power station of the PWR [pressurized water reactors] type

International Nuclear Information System (INIS)

Huber, Horacio

1989-01-01

Starting with the first nuclear power plant constructed by Siemens AG of the pressurized light water reactor line (PWR), the Obrigheim Nuclear Power Plant (340 MWe net), until the recently constructed plants of 1300 MWe (named 'Konvoi'), the design of the power control system of the plant was continuously improved and optimized using the experience gained in the operation of the earlier generations of plants. The reactor power control system of the Siemens - KWU nuclear power plants is described. The features of this design and of the Siemens designed heavy water power plants (PHWR) Atucha I and Atucha II are mentioned. Curves showing the behaviour of the controlled variables during load changes obtained from plant tests are also shown. (Author) [es

Siemens fuel gasification technology for the Canadian oil sands industry

Energy Technology Data Exchange (ETDEWEB)

Morehead, H. [Siemens Energy Inc., Orlando, FL (United States). IGCC and Gasification Sales and Marketing

2010-07-01

The Siemens fuel gasification (SFG) technology can be used to gasify a range of feedstocks, including petcoke, hard coal, lignite, and low-ranking fuels such as biomass and refinery residuals. The technology has recently been applied to a number of projects over the last 3 years. This paper discussed some of the issues related to the technology and it's use at a start-up facility in China. Five entrained-flow gasifiers with a thermal capacity of 500 MW are being installed at a coal gasification plant in northwestern China. The technology's use in hydrogen, steam and power production applications for the oil sands industry was also discussed. Issues related to feedstock quality, process characteristics, and equipment requirements for commercial gasifier systems were reviewed. The paper concluded by observing that improvements in gasification technology will make coal and petcoke gasification feasible options for power generation. IGCC is the most advanced and cost-effective technology for reducing emissions from coal-fired power plants. Gasification-based plants are also able to capture carbon dioxide (CO{sub 2}) for storage and sequestration. Details of the Siemens gasification test center in Germany were also included. 1 tab., 4 figs.

Generating and distributing electricity economically and in large amounts for generations. Siemens - a synonym of electrical industry

International Nuclear Information System (INIS)

Feldenkirchen, W.

1997-01-01

The development of electrical engineering and the history of the Siemens company have been closely interrelated since their beginnings. Since the late 19th century, the electrical industry, by constantly extending its range of products, has turned into a sector of economy with an international reputation. Under the paradigm of assuming technological leadership, or co-leadership, in the development of electrical engineering world-wide, Siemens has had its share in this process. (orig.) [de

Pushing forward IGCC and CO{sub 2}-free power plant technology at Siemens

Energy Technology Data Exchange (ETDEWEB)

Hannemann, E.; Vortmeyer, N.; Zimmermann, G. [Siemens AG, Erlangen (Germany). Power Generation

2004-07-01

Siemens Power Generation has entered into several R & D projects within the European Commissions' 5th and 6th Framework Programs. One objective of those projects is to develop advanced modular IGCC concepts for in-refinery energy and hydrogen supply. Additional projects are dealing with pre- and post-combustion decarbonisation technologies, which should achieve high carbon dioxide capture at low costs. In parallel, the development of advanced combustion systems including enhanced fuel flexibility and application of low BTU gases in the highly efficient Siemens V94.3A gas turbine are in progress. In further step the technology for burning hydrogen enriched gases resulting from decarbonisation in CO{sub 2} free power plants will be provided. This report documents the current status of these activities. 9 refs., 12 figs.

Siemens: Smart Technologies for Large Control Systems

CERN Multimedia

CERN. Geneva; BAKANY, Elisabeth

2015-01-01

The CERN Large Hadron Collider (LHC) is known to be one of the most complex scientific machines ever built by mankind. Its correct functioning relies on the integration of a multitude of interdependent industrial control systems, which provide different and essential services to run and protect the accelerators and experiments. These systems have to deal with several millions of data points (e.g. sensors, actuators, configuration parameters, etc…) which need to be acquired, processed, archived and analysed. Since more than 20 years, CERN and Siemens have developed a strong collaboration to deal with the challenges for these large systems. The presentation will cover the current work on the SCADA (Supervisory Control and Data Acquisition) systems and Data Analytics Frameworks.

Not the market allowing to quickly pocket money. Siemens/KWU and their commitments in Central and Eastern Europe; ``Kein Markt fuer schnelles Geld``. Das Engagement von Siemens/KWU in Mittel- und Osteuropa

Energy Technology Data Exchange (ETDEWEB)

Schwegmann, P.

1997-05-01

After the break-up of the Eastern Bloc, Siemens very soon concluded strategic alliances with the big and most qualified Russian power plant manufacturers, busy activities currently focusing on the nuclear sector with retrofitting and safety engineering work in a number of NPPs. Points of main interest are systems analysis, recurrent inspection of primary loop components, and the installation of diagnostic systems for operational monitoring, as well as the instrumentation and control systems. (Orig./RHM) [Deutsch] In Russland ist es Siemens nach der politischen Wende gelungen, mit den groessten und qualifiziertesten Kraftwerksherstellern Russlands strategisch bedeutsame Allianzen einzugehen. Sehr ruehrig ist man auf dem Nuklear-Sektor. So werden gegenwaertig die Sicherheitseinrichtungen einer Reihe von Kernkraftwerken nachgebessert. Schwerpunkte sind dabei Analysen, wiederkehrende Pruefungen an Komponenten der Primaerkreislaeufe sowie die Installation von Diagnosesystemen, Betriebs- und Leittechnik. (orig.)

Siemens' innovative role in mining technology

Energy Technology Data Exchange (ETDEWEB)

1990-07-01

The growth of the mining industry in South Africa has played a decisive role in the industrial development of the country. As mining activities expanded, the need for energy production increased and as of late mining is becoming more mechanised and the need for more energy as well as automation is growing. The origins of Siemens operations in South Africa date back to the humble beginnings of the mining era, when the company provided the first generator and floodlights to illuminate the famous 'Big Hole' of the diamond mine at Kimberley as well as hydro-electric plants in 1895 on the Crocodile River and Blyde River respectively to supply the newly established mines in the Lydenburg district with electric power. 7 figs.

Kinetic data bank for Ramona of the Siemens 9x9-IX

International Nuclear Information System (INIS)

Alonso V, G.

1993-12-01

With the purpose of making the transitory analyses of the Laguna Verde Nuclear Power station when Siemens fuel of the type 9x9-IX is used, proposed for the cycle 2 of the Unit 2, the kinetic data bank in hot condition for the Ramona code has been generated. (Author)

Steam generators secondary side chemical cleaning at Point Lepreau using the Siemen's high temperature process

International Nuclear Information System (INIS)

Verma, K.; MacNeil, C.; Odar, S.

1996-01-01

The secondary sides of all four steam generators at the Point Lepreau Nuclear Generating Stations were cleaned during the 1995 annual outage run-down using the Siemens high temperature chemical cleaning process. Traditionally all secondary side chemical cleaning exercises in CANDU as well as the other nuclear power stations in North America have been conducted using a process developed in conjunction with the Electric Power Research Institute (EPRI). The Siemens high temperature process was applied for the first time in North America at the Point Lepreau Nuclear Generating Station (PLGS). The paper discusses experiences related to the pre and post award chemical cleaning activities, chemical cleaning application, post cleaning inspection results and waste handling activities. (author)

Analisis Studi Komperatif Perbandingan Key Performance Index Swap Huawei dengan Nokia Siemens Network pada Operator Telkomsel (Sto Tebas)

OpenAIRE

Jimmy

2015-01-01

– The need for telecommunications is very important and makes the mobile operators including Telkomsel are trying ways to improvise their network system, by optimizing the BTSs one of way is to maintain and even increase the success call rate by optimizing the device by swapping Huawei BTS to Nokia Siemens Network (NSN) BTS. The results of the KPI comparison between the Huawei's BTS with Nokia Siemens Network's on the SDSR on Huawei BTS percentage of success rate is 99.59% raised calls is hig...

Agile working as a key for diversity: the Siemens office project

OpenAIRE

S. Cuomo; A. Mapelli

2014-01-01

Following directives from corporate headquarters in 2011, the Real Estate Division of Siemens Italia faced the challenge of implementing significant changes in work organisation, which arose from the need to consolidate all the Milan-based offices into a single location; a Green Building, characterised by a reduction of the available floor space, compared to the sum of the local offices. However, this reorganisation was perceived as stimulus to think of this change, not only in relation to sp...

Overview, practical tips and potential pitfalls of using automatic exposure control in CT: Siemens care dose 4D

International Nuclear Information System (INIS)

Soederberg, Marcus

2016-01-01

Today, computed tomography (CT) systems routinely use automatic exposure control (AEC), which modulates the tube current. However, for optimal use, there are several aspects of an AEC system that need to be considered. The purpose of this study was to provide an overview of the Siemens CARE Dose 4D AEC system, discuss practical tips and demonstrate potential pitfalls. Two adult anthropomorphic phantoms were examined using two different Siemens CT systems. When optimising the CT radiation dose and image quality, the projection angle of the localiser, patient centring, protocol selection, scanning direction and the use of protective devices requires special attention. (authors)

78 FR 25304 - Siemens Medical Solutions, USA, Inc., Oncology Care Systems (Radiation Oncology), Including On...

Science.gov (United States)

2013-04-30

..., USA, Inc., Oncology Care Systems (Radiation Oncology), Including On-Site Leased Workers From Source... Medical Solutions, USA, Inc., Oncology Care Systems (Radiation Oncology), including on- site leased... of February 2013, Siemens Medical Solutions, USA, Inc., Oncology Care Systems (Radiation Oncology...

Siemens fuel gasification technology - solutions and developments

Energy Technology Data Exchange (ETDEWEB)

Hannemann, F.; Schingnitz, M.; Schmid, C. [Siemens Fuel Gasification Technology GmbH, Freiberg (Germany)

2007-07-01

In 2006, Siemens Power Generation Group acquired the GSP Gasification technology, and renamed it SFGT. The presentation reviews the technology and provides an update on current projects. The future plans for the development of the technology based on extensive experience and comprehensive development work gathered over many years and proven in a number of gasification plants is covered. SFGT operates, at its Freiberg facility, a 5 MWth pilot plant which was built to test prototype designs and to determine process conditions for various feed streams. An overview is given of the results of tests completed on a wide range of carbonaceous materials including all types of solid fuels from lignite to anthracite, as well as brown coal, oil, sludge or biomass, and low-temperature coke or petcoke. The technical focus of the paper is on the unique design features such as the cooling screen and alternative refractory lining, as well as the dense flow feeding system that allows the preferable use of lignite applications.

Climate Change Mitigation Technologies: the Siemens Roadmap to Carbon Capture and Storage

Energy Technology Data Exchange (ETDEWEB)

Voges, K.

2007-07-01

A full range of technology options will have to be deployed until 2025 to get the global CO{sub 2} emissions on a 550 ppm stabilization track. The focus of the paper will be on Carbon Capture and Storage (CCS) as an indispensable part of a carbon constrained energy infrastructure. In CCS our main long term focus is clearly on coal based processes. For Greenfield applications Siemens is prioritizing IGCC based pre-combustion capture. Post-combustion capture is pursued for steam power plant retrofit. (a) IGCC with pre-combustion capture: A first F-class based demonstration plant could be available until 2014. The roadmap addresses gasifier scale up, hydrogen burner and turbine development and integration issues. Beyond that a bundle of further efficiency improvement measures will further enhance efficiency and economic competitiveness. (b) Post-combustion capture: The development aims at optimizing existing solvents or developing new ones and integrating the complete unit with its mass and heat interchange system into the power plant. (c) CO{sub 2} Compressors: For efficiency and operating flexibility reasons Siemens Power Generation prefers gear-type compressors instead of single shaft compressors. The improvement of maintainability and the reduced number of stages or corrosion protection are issues addressed in current R and D activities. (auth)

Investigation of the mechanical performance of Siemens linacs components during arc: gantry, MLC, and electronic portal imaging device

Directory of Open Access Journals (Sweden)

Rowshanfarzad P

2015-11-01

Full Text Available Pejman Rowshanfarzad,1 Peter Häring,2 Hans L Riis,3 Sune J Zimmermann,3 Martin A Ebert1,4 1School of Physics, The University of Western Australia, Crawley, WA, Australia; 2German Cancer Research Center (DKFZ, Medical Physics in Radiation Oncology, Heidelberg, Germany; 3Radiofysisk Laboratorium, Odense University Hospital, Odense C, Denmark; 4Department of Radiation Oncology, Sir Charles Gairdner Hospital, Nedlands, WA, Australia Background: In radiotherapy treatments, it is crucial to monitor the performance of linac components including gantry, collimation system, and electronic portal imaging device (EPID during arc deliveries. In this study, a simple EPID-based measurement method is suggested in conjunction with an algorithm to investigate the stability of these systems at various gantry angles with the aim of evaluating machine-related errors in treatments. Methods: The EPID sag, gantry sag, changes in source-to-detector distance (SDD, EPID and collimator skewness, EPID tilt, and the sag in leaf bank assembly due to linac rotation were separately investigated by acquisition of 37 EPID images of a simple phantom with five ball bearings at various gantry angles. A fast and robust software package was developed for automated analysis of image data. Three Siemens linacs were investigated. Results: The average EPID sag was within 1 mm for all tested linacs. Two machines showed >1 mm gantry sag. Changes in the SDD values were within 7.5 mm. EPID skewness and tilt values were <1° in all machines. The maximum sag in leaf bank assembly was <1 mm. Conclusion: The method and software developed in this study provide a simple tool for effective investigation of the behavior of Siemens linac components with gantry rotation. Such a comprehensive study has been performed for the first time on Siemens machines. Keywords: linac, Siemens, arc, sag, EPID, gantry

Five years of experience with external laundry service for alpha-contaminated protective clothing in the decommissioning period Siemens PG formerly Siemens fuel rod factory Hanau

International Nuclear Information System (INIS)

Raabe, E.; Hadders, R.; Wilke, M.

2003-01-01

The external decontamination of protective clothing is a new concept in Europe in the past, companies ran their own laundries and decontaminated their clothing themselves. Running a laundry within a nuclear facility bears a great deal of complicated problems. Firstly the operator must find suitable staffs, which has to pass the strict vetting and still not be overqualified for the job. In addition to the problem of finding and employing suitable, reliable staff the workload varies very much. Although this is not the main problem for the decommissioning project Siemens PG fuel rod factory. Nuclear power plants have to employ additional staff for their laundries during outages. (orig.)

Leakage of the Siemens 160 MLC multileaf collimator on a dual energy linear accelerator

International Nuclear Information System (INIS)

Klueter, Sebastian; Sroka-Perez, Gabriele; Schubert, Kai; Debus, Juergen

2011-01-01

Multileaf collimators (MLCs) have been in clinical use for many years and meanwhile are commonly used to deliver intensity-modulated radiotherapy (IMRT) beams. For this purpose it is important to know their dosimetric properties precisely, one of them being inter- and intraleaf leakage. The Siemens 160 MLC features a single focus design with flat-sided and tilted leaves instead of tongue-and-groove. The leakage performance of the 160 MLC was investigated on a dual energy linear accelerator Siemens ARTISTE with 6 MV and 18 MV photon energies. While the intraleaf leakage amounted to nearly the same dose for 6 and for 18 MV, a much higher interleaf leakage for 6 MV was measured. It could be reduced by simply rotating the collimator, and also by changing the voltage applied to the beam steering coils. The leakage of the 160 MLC is shown to be sensitive to beam alignment. This is of special interest for dual energy accelerators, as the two focal spots of both energies, neither in position nor in shape, do not necessarily always coincide. As a consequence of that, a higher leakage can be expected for one out of two energies for the 160 MLC. (note)

Investigation of the mechanical performance of Siemens linacs components during arc: gantry, MLC, and electronic portal imaging device.

Science.gov (United States)

Rowshanfarzad, Pejman; Häring, Peter; Riis, Hans L; Zimmermann, Sune J; Ebert, Martin A

2015-01-01

In radiotherapy treatments, it is crucial to monitor the performance of linac components including gantry, collimation system, and electronic portal imaging device (EPID) during arc deliveries. In this study, a simple EPID-based measurement method is suggested in conjunction with an algorithm to investigate the stability of these systems at various gantry angles with the aim of evaluating machine-related errors in treatments. The EPID sag, gantry sag, changes in source-to-detector distance (SDD), EPID and collimator skewness, EPID tilt, and the sag in leaf bank assembly due to linac rotation were separately investigated by acquisition of 37 EPID images of a simple phantom with five ball bearings at various gantry angles. A fast and robust software package was developed for automated analysis of image data. Three Siemens linacs were investigated. The average EPID sag was within 1 mm for all tested linacs. Two machines showed >1 mm gantry sag. Changes in the SDD values were within 7.5 mm. EPID skewness and tilt values were <1° in all machines. The maximum sag in leaf bank assembly was <1 mm. The method and software developed in this study provide a simple tool for effective investigation of the behavior of Siemens linac components with gantry rotation. Such a comprehensive study has been performed for the first time on Siemens machines.

Innovative maintenance concept 0f Siemens Energy Service. Turbine documentation in an online catalogue; Innovatives Instandhaltungskonzept bei Siemens Energy Service. Turbinendokumentation als Onlinekatalog

Energy Technology Data Exchange (ETDEWEB)

Bitzer, Gerd [Wessendorf Software and Consulting, Berlin (Germany); Stass, Georg [Tema Technologie Marketing AG, Berlin (Germany)

2010-10-04

For optimization of its maintenance services, Siemens Energy Services has drawn up an online catalogue as a standardized solution for turbine documentation for customers and service technicians. The new catalogue offers power plant operators internet access to the current documentation of service-relevant replacement parts for machinery. The catalogues are based on SAP data using the Linkone software; each of them has up to 3,000 material items and 1,000 illustrations of replacement parts depending on the type of turbine. The project partner was the Berlin consulting service Wessendorf Software + Consulting (WSC) who have vast experience in the implementation of international catalogue and documentation projects with SAP software. After a project period of 15 months, the innovative solution was implemented in April 2010 and then launched in the market. (orig.)

Christ siemens touraine syndrome: A rare case report

Directory of Open Access Journals (Sweden)

N Retnakumari

2016-01-01

Full Text Available Christ-Siemens-Touraine (CST is a rare hereditary disorder of X-linked recessive trait, characterized by abnormal development of two or more structures or tissues of ectodermal origin. The common clinical findings include hypodontia, hypohydrosis, hypotrichosis, and onychodysplasia. Although hypodontia is common, anodontia is a rare feature. Most of the patients are suffering from social rejection and consequent psychological trauma because of the facial dysmorphism and absence of multiple teeth. Oral rehabilitation is of prime importance for such patients. This article presents a case in a 5½-year-old boy presenting with altered manifestations affecting almost all the ectodermal structures like skin, hair, nails, teeth, sebaceous glands, sweat glands, salivary glands, mammary glands, and tear glands. He also had complete anodontia and dry mouth. A multidisciplinary treatment was given to the patient with the collaboration of various health professionals. The child gained confidence and was relieved from the psychological impact following the prosthetic rehabilitation.

Christ Siemens Touraine syndrome: A rare case report.

Science.gov (United States)

Retnakumari, N; Varghese, Manuja; Kannan, V P

2016-01-01

Christ-Siemens-Touraine (CST) is a rare hereditary disorder of X-linked recessive trait, characterized by abnormal development of two or more structures or tissues of ectodermal origin. The common clinical findings include hypodontia, hypohydrosis, hypotrichosis, and onychodysplasia. Although hypodontia is common, anodontia is a rare feature. Most of the patients are suffering from social rejection and consequent psychological trauma because of the facial dysmorphism and absence of multiple teeth. Oral rehabilitation is of prime importance for such patients. This article presents a case in a 5½-year-old boy presenting with altered manifestations affecting almost all the ectodermal structures like skin, hair, nails, teeth, sebaceous glands, sweat glands, salivary glands, mammary glands, and tear glands. He also had complete anodontia and dry mouth. A multidisciplinary treatment was given to the patient with the collaboration of various health professionals. The child gained confidence and was relieved from the psychological impact following the prosthetic rehabilitation.

Siemens Nuclear Power Corporation experience with BWR and PWR fuels

International Nuclear Information System (INIS)

Reparaz, A.; Smith, M.H.; Stephens, L.G.

1992-01-01

The large data base of fuel performance parameters available to Siemens Nuclear Power Corporation (SNP), and the excellent track record of innovation and fuel reliability accumulated over the last twenty-three years, allows SNP to have a clear insight on the characteristics of future developments in the area of fuel design. Following is a description of some of SNP's recent design innovations to prevent failures and to extend burnup capabilities. A goal paramount to the design and manufacture of BWR and PWR fuel is that of zero defects from any case during its operation in the reactor. Progress has already been made in achieving this goal. This paper summarized the cumulative failure rate of SNP fuel rod through January 1992

En undersøgelse af de 253 første nyrestensbehandlinger med 3. generations Siemens Lithoskop™

DEFF Research Database (Denmark)

Kruckow, Line; Eldrup, Jesper

Introduktion: Kandidatspecialets formål er at undersøge et års behandlinger af nyresten ved ny stenknuser, Siemens Lithoskop. Undersøgelsen fokuserer på hvorvidt stenstørrelse, BMI og stenplacering har indflydelse på stenfrihedsraten. Metode: Mellem 6/12-11 og 11/12-12 blev 253 behandlinger og...

Development of a measurement and control system for a 10 kW@20 K refrigerator based on Siemens PLC S7-300

Science.gov (United States)

Li, J.; Liu, L. Q.; Liu, T.; Xu, X. D.; Dong, B.; Lu, W. H.; Pan, W.; Wu, J. H.; Xiong, L. Y.

2017-02-01

A 10 kW@20 K refrigerator has been established by the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. A measurement and control system based on Siemens PLC S7-300 for this 10 kW@20 K refrigerator is developed. According to the detailed measurement requirements, proper sensors and transmitters are adopted. Siemens S7-300 PLC CPU315-2 PN/DP operates as a master station. Two sets of ET200M DP remote expand I/O, one power meter, two compressors and one vacuum gauge operate as slave stations. Profibus-DP field communication and Modbus communication are used between the master station and the slave stations in this control system. The upper computer HMI (Human Machine Interface) is compiled using Siemens configuration software WinCC V7.0. The upper computer communicates with PLC by means of industrial Ethernet. After commissioning, this refrigerator has been operating with a 10 kW of cooling power at 20 K for more than 72 hours.

Development of a Measurement and Control System for a 40l/h Helium Liquefier based on Siemens PLC S7-300

Science.gov (United States)

Li, J.; Liu, L. Q.; Xu, X. D.; Liu, T.; Li, Q.; Hu, Z. J.; Wang, B. M.; Xiong, L. Y.; Dong, B.; Yan, T.

A 40l/h Helium Liquefier has been commissioned by the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. A measurement and control system based on Siemens PLC S7-300 for this Helium Liquefier is developed. Proper sensors are selected, for example, three types of transmitters are adopted respectively according to detailed temperature measurement requirements. Siemens S7-300 PLC CPU315-2PN/DP operates as a master station and three sets of ET200 M DP remote expand I/O operate asslave stations. Profibus-DP field communication is used between the master station and the slave stations. The upper computer HMI(Human Machine Interface) is compiled using Siemens configuration software WinCC V7.0. The upper computer communicates with PLC by means of industrial Ethernet. A specific control logic for this Helium Liquefier is developed. The control of the suction and discharge pressures of the compressor and the control of the turbo-expanders loop are being discussed in this paper. Following the commissioning phase, the outlet temperature of the second stage turbine has reached 8.6K and the temperature before the throttle valve has reached 13.1K.

Measurement and control system for cryogenic helium gas bearing turbo-expander experimental platform based on Siemens PLC S7-300

Energy Technology Data Exchange (ETDEWEB)

Li, J.; Xiong, L. Y.; Peng, N.; Dong, B.; Liu, L. Q. [Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190 (China); Wang, P. [Beijing Sciample Technology Co., Ltd., Beijing, 100190 (China)

2014-01-29

An experimental platform for cryogenic Helium gas bearing turbo-expanders is established at the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. This turbo-expander experimental platform is designed for performance testing and experimental research on Helium turbo-expanders with different sizes from the liquid hydrogen temperature to the room temperature region. A measurement and control system based on Siemens PLC S7-300 for this turbo-expander experimental platform is developed. Proper sensors are selected to measure such parameters as temperature, pressure, rotation speed and air flow rate. All the collected data to be processed are transformed and transmitted to S7-300 CPU. Siemens S7-300 series PLC CPU315-2PN/DP is as master station and two sets of ET200M DP remote expand I/O is as slave station. Profibus-DP field communication is established between master station and slave stations. The upper computer Human Machine Interface (HMI) is compiled using Siemens configuration software WinCC V6.2. The upper computer communicates with PLC by means of industrial Ethernet. Centralized monitoring and distributed control is achieved. Experimental results show that this measurement and control system has fulfilled the test requirement for the turbo-expander experimental platform.

Measurement and control system for cryogenic helium gas bearing turbo-expander experimental platform based on Siemens PLC S7-300

Science.gov (United States)

Li, J.; Xiong, L. Y.; Peng, N.; Dong, B.; Wang, P.; Liu, L. Q.

2014-01-01

An experimental platform for cryogenic Helium gas bearing turbo-expanders is established at the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. This turbo-expander experimental platform is designed for performance testing and experimental research on Helium turbo-expanders with different sizes from the liquid hydrogen temperature to the room temperature region. A measurement and control system based on Siemens PLC S7-300 for this turbo-expander experimental platform is developed. Proper sensors are selected to measure such parameters as temperature, pressure, rotation speed and air flow rate. All the collected data to be processed are transformed and transmitted to S7-300 CPU. Siemens S7-300 series PLC CPU315-2PN/DP is as master station and two sets of ET200M DP remote expand I/O is as slave station. Profibus-DP field communication is established between master station and slave stations. The upper computer Human Machine Interface (HMI) is compiled using Siemens configuration software WinCC V6.2. The upper computer communicates with PLC by means of industrial Ethernet. Centralized monitoring and distributed control is achieved. Experimental results show that this measurement and control system has fulfilled the test requirement for the turbo-expander experimental platform.

Effect of filters and reconstruction algorithms on I-124 PET in Siemens Inveon PET scanner

Science.gov (United States)

Ram Yu, A.; Kim, Jin Su

2015-10-01

Purpose: To assess the effects of filtering and reconstruction on Siemens I-124 PET data. Methods: A Siemens Inveon PET was used. Spatial resolution of I-124 was measured to a transverse offset of 50 mm from the center FBP, 2D ordered subset expectation maximization (OSEM2D), 3D re-projection algorithm (3DRP), and maximum a posteriori (MAP) methods were tested. Non-uniformity (NU), recovery coefficient (RC), and spillover ratio (SOR) parameterized image quality. Mini deluxe phantom data of I-124 was also assessed. Results: Volumetric resolution was 7.3 mm3 from the transverse FOV center when FBP reconstruction algorithms with ramp filter was used. MAP yielded minimal NU with β =1.5. OSEM2D yielded maximal RC. SOR was below 4% for FBP with ramp, Hamming, Hanning, or Shepp-Logan filters. Based on the mini deluxe phantom results, an FBP with Hanning or Parzen filters, or a 3DRP with Hanning filter yielded feasible I-124 PET data.Conclusions: Reconstruction algorithms and filters were compared. FBP with Hanning or Parzen filters, or 3DRP with Hanning filter yielded feasible data for quantifying I-124 PET.

Study and evaluation of the Siemens virtual wedge factor: dosimetric monitor system and variable field effects

Energy Technology Data Exchange (ETDEWEB)

Sendon Rio, J R Sendon; Martinez, C Otero; GarcIa, M Sanchez; Busto, R Lobato; Vega, V Luna; Sueiro, J Mosquera; Camean, M Pombar [Servizo de Radiofisica e Proteccion Radioloxica, Complexo Hospitalario Universitario de Santiago de Compostela (CHUS), Santiago de Compostela (Spain)], E-mail: jose.ramon.sendon.del.rio@sergas.es

2008-03-07

In the year 1997 Siemens introduced the virtual wedge in its accelerators. The idea was that a dose profile similar to that of a physical wedge can be obtained by moving one of the accelerator jaws at a constant speed while the dose rate is changing. This work explores the observed behaviour of virtual wedge factors. A model is suggested which takes into account that at any point in time, when the jaw moves, the dose at a point of interest in the phantom is not only due to the direct beam. It also depends on the scattered radiation in the phantom, the head scatter and the behaviour of the monitoring system of the accelerator. Measurements are performed in a Siemens Primus accelerator and compared to the model predictions. It is shown that the model agrees reasonably well with measurements spanning a wide range of conditions. A strong dependence of virtual wedge factors on the dosimetric board has been confirmed and an explanation has been given on how the balance between different contributions is responsible for virtual wedge factors values.

Introduction of circuit design on RFID system

International Nuclear Information System (INIS)

Pak, Sunho

2007-06-01

This is a case of research of Fujitsu company and design of basic circuit of electronic technique. It is composed of two parts. The first part deals with introduction of RFID system design, which lists basic knowledge of ubiquitous, glossary of high frequency, design of impedance matching circuit, RFID system, sorts and design of filter, modulator and a transmission and RFID system design. The second part deals with research and development of Fujitsu company, including RFID middle ware RFID CONNECT of Fujitsu, sensor network of Fujitsu and high handing technique of RFID system.

Introduction of circuit design on RFID system

Energy Technology Data Exchange (ETDEWEB)

Pak, Sunho

2007-06-15

This is a case of research of Fujitsu company and design of basic circuit of electronic technique. It is composed of two parts. The first part deals with introduction of RFID system design, which lists basic knowledge of ubiquitous, glossary of high frequency, design of impedance matching circuit, RFID system, sorts and design of filter, modulator and a transmission and RFID system design. The second part deals with research and development of Fujitsu company, including RFID middle ware RFID CONNECT of Fujitsu, sensor network of Fujitsu and high handing technique of RFID system.

Christ-Siemens-Touraine Syndrome: A Case Report and Review of the Literature

Directory of Open Access Journals (Sweden)

Sepideh Mokhtari

2012-01-01

Full Text Available Ectodermal dysplasia is a rare disorder with defects in two or more of the following structures: the teeth and the skin and its appendages including hair, nails, eccrine, and sebaceous glands. Anhidrotic ectodermal dysplasia is the most common type of disease. This rare disorder, also known as Christ-Siemens-Touraine syndrome, manifests as a triad of hypotrichosis, asteatosis, and anhidrosis. In view of the rarity of this entity, a classical case of anhidrotic ectodermal dysplasia is reported. We have also provided a review of recent investigations in the area of dental abnormalities in this syndrome.

Siemens IT solutions for power sector

International Nuclear Information System (INIS)

Lunter, P.

2004-01-01

The cost reduction, flexibility and revenue increase, potential exploitation, productivity increase, and business opportunities exploitation - that is all what can be required in the races for the promonent positioning on the electricity power market. These requirements can be realized by the sophisticated IT solutions hand-tailored to the special requirements of the electric power producers and tradesmen. This approach makes it possible to achieve greater profit. Our solutions 'PROFIT Solutions', that are symbiosis of the most progressive information technologies and the power plant techniques of the company Siemens, satisfy submitted specifications in substantial measure. The system solutions 'PROFIT Solutions' comprise three solution groups: process, operation a business. The solutions of the group 'IT Process Solutions' increase flexibility and manoeuvrability of equipment, improve the efficiency and contribute to more economical operation of the power generation. Solutions 'IT Process Solutions' simplify and shorten the period of power cycles and conduce to higher labour productivity. Solutions group 'IT Process Solutions' approaches equipment to the market - supports the profit strategies, helps quickly and expertly to determine and predict hazards. The extension PROFIT Cockpit means the nuance to the solutions world 'PROFIT Solutions'. The survey about the whole installation is within reach at the simple touch of a button. It is possible to compile the total system part by part from single solutions 'PROFIT Solutions'. As a matter of fact all single parts can be interconnected with already existing solutions. Routines 'PROFIT Solutions' cooperate with all modern control systems. (author)

Assessment of Siemens plessey electronic personal dosimeter

International Nuclear Information System (INIS)

Hirning, C.R.; Lopez, S.; Yuen, P.S.

1994-01-01

This report presents the results of a laboratory assessment of the performance of a new type of personal dosimeter. The Electronic Personal Dosimeter, or EPD, was developed jointly by the National Radiological Protection Board and Siemens Plessey Controls Limited, both of the United Kingdom. Twenty pre-production units of the EPD and a reader were purchased by Ontario Hydro for the assessment. The tests were conducted jointly by Ontario Hydro's Health and Safety Division and AECL Research's Chalk River Laboratories (CRL), with funding from the Candu Owner's Group. A total of 26 tests were conducted, divided between Ontario Hydro and AECL. The test results were compared with the relevant requirements of three standards. In general, the performance of the EPD was found to be quite acceptable. It met most of the relevant requirements of the three standards and most of the design specifications. However, the following deficiencies were found: slow response time; sensitivity to high-frequency EMF; poor resistance to dropping; and an alarm that is not loud enough. In addition, the response of the EPD to low-energy beta rays may be too low for some applications. There were serious problems with the reliability of operation of the pre production EPDs used in these tests. 9 refs., 34 tabs., 20 figs

Assessment of Siemens plessey electronic personal dosimeter

Energy Technology Data Exchange (ETDEWEB)

Hirning, C R; Lopez, S [Ontario Hydro, Toronto, ON (Canada); Yuen, P S [Atomic Energy of Canada Ltd., Chalk River, ON (Canada). Chalk River Nuclear Labs.

1994-01-01

This report presents the results of a laboratory assessment of the performance of a new type of personal dosimeter. The Electronic Personal Dosimeter, or EPD, was developed jointly by the National Radiological Protection Board and Siemens Plessey Controls Limited, both of the United Kingdom. Twenty pre-production units of the EPD and a reader were purchased by Ontario Hydro for the assessment. The tests were conducted jointly by Ontario Hydro`s Health and Safety Division and AECL Research`s Chalk River Laboratories (CRL), with funding from the Candu Owner`s Group. A total of 26 tests were conducted, divided between Ontario Hydro and AECL. The test results were compared with the relevant requirements of three standards. In general, the performance of the EPD was found to be quite acceptable. It met most of the relevant requirements of the three standards and most of the design specifications. However, the following deficiencies were found: slow response time; sensitivity to high-frequency EMF; poor resistance to dropping; and an alarm that is not loud enough. In addition, the response of the EPD to low-energy beta rays may be too low for some applications. There were serious problems with the reliability of operation of the pre production EPDs used in these tests. 9 refs., 34 tabs., 20 figs.

VARIABILITY OF FORCED OSCILLATION (SIEMENS SIREGNOST FD-5) MEASUREMENTS OF TOTAL RESPIRATORY RESISTANCE IN PATIENTS AND HEALTHY-SUBJECTS

NARCIS (Netherlands)

GIMENO, F; VANDERWEELE, LT; KOETER, GH; DEMONCHY, JGR; VANALTENA, R

The reproducibility of total respiratory resistance (R(rs)) measured with a simplified forced oscillatory method (Siemens Siregnost FD 5) was measured and compared with that of slow inspiratory vital capacity (IVC) and forced expiratory volume in one second (FEV1). The former technique has the

The effect of different adaptation strengths on image quality and radiation dose using Siemens care dose 4D

International Nuclear Information System (INIS)

Soederberg, M.; Gunnarsson, M.

2010-01-01

The purpose of this study was to evaluate the effect of different choices of adaptation strengths on image quality and radiation exposure to the patient with Siemens automatic exposure control system called CARE Dose 4D. An anthropomorphic chest phantom was used to simulate the patient and computed tomography scans were performed with a Siemens SOMATOM Sensation 16 and 64. Owing to adaptation strengths, a considerable reduction (26.6-51.5 % and 27.5-49.5% for Sensation 16 and Sensation 64, respectively) in the radiation dose was found when compared with using a fixed tube current. There was a substantial difference in the image quality (image noise) between the adaptation strengths. Independent of selected adaptation strengths, the level of image noise throughout the chest phantom increased when CARE Dose 4D was used (p < 0.0001). We conclude that the adaptation strengths can be used to obtain user-specified modifications to image quality or radiation exposure to the patient. (authors)

Siemens Nuclear Power Corporation methods development for BWR/PWR reactor licensing

International Nuclear Information System (INIS)

Pruitt, D.W.

1992-01-01

This presentation addresses the Siemens Nuclear Power Corporation (SNP) perspective on the primary forces driving methods development in the nuclear industry. These forces are fuel design, computational environment and industry requirement evolution. The first segment of the discussion presents the SNP experience base. SNP develops, manufactures and licenses both BWR and PWR reload fuel. A review of this experience base highlights the accelerating rate at which new fuel designs are being introduced into the nuclear industry. The application of advanced BWR lattice geometries provides an example of fuel design trends. The second aspect of the presentation is the rapid evolution of the computing environment. The final subject in the presentation is the impact of industry requirements on code or methods development

New Siemens applications for designing bevel gears

Science.gov (United States)

Goanta, A. M.; Dumitrache, P.

2017-08-01

The current situation in the design of gearings is different from software to software and in some cases requires specialized settings with or without additional costs. There are two ways of generating evolving tooting: one is based on the designer’s solid knowledge of geometry and gearing and the other is based on a series of automation subprograms for 3D modelling of gears. The first method is a general one, applicable to all design software that is based on generating a curve evolving specific to a tooth flank, continued with the construction of the symmetrical flank, the pattern multiplication of circular type around the center of the gear and finally generation of the three-dimensional characteristic of each individual tooth. The second method is much faster and requires only general knowledge about the gear but sufficiently advanced to allow permanent dialogue with the subprogram for generating cone gears. Absolute novelty items are brought about by the new NX design applications that lead to getting gears with curved teeth. In conclusion the paper shows how different variants of bevel gears are generated using various subprograms or performance settings, installed over the SIEMENS NX. An essential component of the paper is highlighting generation capacity of gears and gearing intended for predefined types of gear cutting machines such as those for Gleason and Oerlikon teeth.

Adequate engineering for lowering the frequency of initiating events at Siemens/KWU

International Nuclear Information System (INIS)

Gremm, O.

1988-01-01

The analysis of TMI and Chernobyl events shows weak points and deficits in the field of preventive safety features. This should not be forgotten during the ongoing discussion on severe accidents. Therefore the paper explains special preventive safety features which were the results of the development of Siemens/KWU reactor technology. With respect to the present discussion on new reactor concepts special attention is given to the inherent and passive safety features and the engineering which results in low core melt frequency. Such an analysis leads to knowledge modules which are based on experience during licensing procedures and plant operation and should be the starting points for reactor technology of the future

Advanced PWR Core Design with Siemens High-Plutonium-Content MOX Fuel Assemblies

International Nuclear Information System (INIS)

Dieter Porsch; Gerhard Schlosser; Hans-Dieter Berger

2000-01-01

The Siemens experience with plutonium recycling dates back to the late 1960s. Over the years, extensive research and development programs were performed for the qualification of mixed-oxide (MOX) technology and design methods. Today's typical reload enrichments for uranium and MOX fuel assemblies and modern core designs have become more demanding with respect to accuracy and reliability of design codes. This paper presents the status of plutonium recycling in operating high-burnup pressurized water reactor (PWR) cores. Based on actual examples, it describes the validation status of the design methods and stresses current and future needs for fuel assembly and core design including those related to the disposition of weapons-grade plutonium

Advances in and prospects for development of high-temperature superconductor rotating machines at Siemens

International Nuclear Information System (INIS)

Neumueller, H W; Nick, W; Wacker, B; Frank, M; Nerowski, G; Frauenhofer, J; Rzadki, W; Hartig, R

2006-01-01

We report on the successful manufacture and testing of the Siemens 400 kVA HTS synchronous motor, which has been in operation for over 3 years, and on the progress of the 4 MVA synchronous motor/generator, which has been manufactured and is now in a phase of extended testing. Furthermore, the benefits of HTS machines will be discussed with emphasis on applications in ships. The development of future marketable products will be strongly dependent on the progress of secondary technologies, such as wire performance and efficient cost-effective refrigerators

Siemens experience on linear and nonlinear analyses of out-of-phase BWR instabilities

International Nuclear Information System (INIS)

Kreuter, D.; Wehle, F.

1995-01-01

The Siemens design code STAIF has been applied extensively for linear analysis of BWR instabilities. The comparison between measurements and STAIF calculations for different plants under various conditions has shown good agreement for core-wide and regional instabilities. Based on the high quality of STAIF, the North German TUeV has decided to replace the licensing requirement of extensive stability measurements by predictive analyses with the code STAIF. Nonlinear stability analysis for beyond design boundary conditions with RAMONA has shown dryout during temporarily reversed flow at core inlet in case of core-wide oscillations. For large out-of-phase oscillations, dryout occurs already for small, still positive channel inlet flow. (orig.)

Comprehensive Approach to Energy and Environment in the EcoCare Program for Design, Engineering and Operation of Siemens Industry Solutions

DEFF Research Database (Denmark)

Wegener, Dieter; Finkbeiner, Matthias; Geiger, Dieter

2009-01-01

This paper intends to describe the outline of the Eco Care Program (ECP) at the Siemens-Division Industry Solutions and its implementation. ECP aims to embrace and to coordinate main activities within the product lifecycle management (PLM) process considering both economic targets in terms...

Solar energy: Shell buys up the shares of Siemens and E.ON in their joint-venture

International Nuclear Information System (INIS)

Anon.

2002-01-01

The anglo-Dutch petroleum firm Royal Dutch/Shell has announced its intention to buy up the shares of its German partners Siemens and E.ON in their joint-venture specialized in the solar energy. If the buying up is authorized by the proper authorities, the firm will be held at 100% by Shell. Shell intends indeed to invest 500 millions to 1 milliard of dollars on 5 years in the development of renewable energies. (O.M.)

Proposal for the award of blanket contracts for the supply of Intel-based desktop PCs, display monitors and portable PCs

CERN Document Server

2000-01-01

This document concerns the award of blanket contracts for the supply of the three following categories of equipment for the period 2001-2004: a) desktop PCs (complete PC systems but without display monitors), b) display monitors (conventional CRTs or flat screen LCDs) and c) portable PCs (also called notebooks or laptops). Following a market survey carried out among 41 firms in fourteen Member States, an invitation to tender (IT-2692/IT) was sent on 19 May 2000 to 12 firms and three consortia, each consisting of two firms, in five Member States. By the closing date, CERN had received seven tenders, all from the Swiss subsidiaries of the firms and consortia. The Finance Committee is invited to agree to the negotiation of - blanket contracts with VOBIS (CH), ELONEX (CH) and FUJITSU-SIEMENS (CH), the three lowest bidders complying with the specification, for the supply of Desktop PCs; - blanket contracts with VOBIS (CH), SYNOPTIC (CH) and ELONEX (CH), the three lowest bidders offering display monitors manufactur...

Application of NX Siemens PLM software in educational process in preparing students of engineering branch

Science.gov (United States)

Sadchikova, G. M.

2017-01-01

This article discusses the results of the introduction of computer-aided design NX by Siemens Plm Software to the classes of a higher education institution. The necessity of application of modern information technologies in teaching students of engineering profile and selection of a software product is substantiated. The author describes stages of the software module study in relation to some specific courses, considers the features of NX software, which require the creation of standard and unified product databases. The article also gives examples of research carried out by the students with the various software modules.

The continual innovation of commercial PET/CT solutions in nuclear cardiology: Siemens Healthineers.

Science.gov (United States)

Bendriem, Bernard; Reed, Jessie; McCullough, Kathryn; Khan, Mohammad Raza; Smith, Anne M; Thomas, Damita; Long, Misty

2018-04-10

Cardiac PET/CT is an evolving, non-invasive imaging modality that impacts patient management in many clinical scenarios. Beyond offering the capability to assess myocardial perfusion, inflammatory cardiac pathologies, and myocardial viability, cardiac PET/CT also allows for the non-invasive quantitative assessment of myocardial blood flow (MBF) and myocardial flow reserve (MFR). Recognizing the need for an enhanced comprehension of coronary physiology, Siemens Healthineers implemented a sophisticated solution for the calculation of MBF and MFR in 2009. As a result, each aspect of their innovative scanner and image-processing technology seamlessly integrates into an efficient, easy-to-use workflow for everyday clinical use that maximizes the number of patients who potentially benefit from this imaging modality.

Automatic attenuator upgrade for a Siemens D500 diffractometer via a generic software library to overcome hardware limitations

International Nuclear Information System (INIS)

Mayr, Sina; Randau, Christian; Kreuzpaintner, Wolfgang

2017-01-01

A proxy software was developed which allows the Siemens D500 x-ray diffractometer to be upgraded with add-ons that have never been officially available for it. For demonstration, we designed and integrated an automatic attenuator option and demonstrated the feasibility of our upgrade path by typical comparative x-ray measurements, which would usually saturate the x-ray detector, if no attenuator is used.

Automatic attenuator upgrade for a Siemens D500 diffractometer via a generic software library to overcome hardware limitations

Energy Technology Data Exchange (ETDEWEB)

Mayr, Sina, E-mail: sina.mayr@frm2.tum.de [Technische Universität München, Physik-Department E21, James-Franck-Str. 1, 85748 Garching (Germany); Randau, Christian [Georg-August-Universität Göttingen, Fakultät für Geowissenschaften und Geologie, Abteilung Isotopengeologie Außenstelle MLZ (FRM II), Lichtenbergstr. 1, 85748 Garching (Germany); Kreuzpaintner, Wolfgang [Technische Universität München, Physik-Department E21, James-Franck-Str. 1, 85748 Garching (Germany)

2017-05-21

A proxy software was developed which allows the Siemens D500 x-ray diffractometer to be upgraded with add-ons that have never been officially available for it. For demonstration, we designed and integrated an automatic attenuator option and demonstrated the feasibility of our upgrade path by typical comparative x-ray measurements, which would usually saturate the x-ray detector, if no attenuator is used.

Cross calibration of the Siemens mMR: easily acquired accurate PET phantom measurements, long term stability and reproducibility

Energy Technology Data Exchange (ETDEWEB)

Keller, Sune H [Rigshospitalet, University of Copenhagen, Copenhagen (Denmark); Jakoby, Bjorn [University of Surrey, Guildford (United Kingdom); Hansen, Adam Espe; Svalling, Susanne; Klausen, Thomas L [Rigshospitalet, University of Copenhagen, Copenhagen (Denmark)

2015-05-18

We present a quick and easy method to perform quantitatively accurate PET scans of typical water-filled PET plastic shell phantoms on the Siemens mMR PET/MR scanner. We perform regular cross calibrations (Xcals) of our PET scanners, including the Siemens mMR PET/MR, with a Siemens mCT water phantom. We evaluate the mMR cross calibration stability over a 3-year period. Recently, the mMR software (VB20P) offered the option of using predefined μ-maps. We evaluated this option by using either the predefined μ-map of the long mMR water phantom or a system-integrated user defined CT-based μ-map of the mCT water phantom used for Xcal. On 54 cross calibrations that were acquired over 3 years, the mMR on average underestimated the concentration by 16% due to the use of MR-based μ-maps. The mMR produced the narrowest range and lowest standard deviation of the Xcal ratios, implying it and is the most stable of the 6 scanners included in this study over a 3 year period. With correctly segmented μ-maps, the mMR produced Xcal ratios of 1.00-1.02, well within the acceptance range [0.95-1.05]. Measuring the concentration in a centrally placed cylindrical VOI allows for some robustness against misregistration of the μ-maps but it should be no more than a few millimeters in the x-y plane, while the tolerance is larger on the z-axis (when, as always with PET, keeping clear of the axial edges of the FOV). The mMR is the most stable scanner in this study and the mean underestimation is no longer an issue with the easily accessible μ-map, which in all 7 tests resulted in correct Xcal ratios. We will share the user defined μ-map of the mCT phantom and the protocol with interested mMR users.

Cross calibration of the Siemens mMR: easily acquired accurate PET phantom measurements, long term stability and reproducibility

International Nuclear Information System (INIS)

Keller, Sune H; Jakoby, Bjorn; Hansen, Adam Espe; Svalling, Susanne; Klausen, Thomas L

2015-01-01

We present a quick and easy method to perform quantitatively accurate PET scans of typical water-filled PET plastic shell phantoms on the Siemens mMR PET/MR scanner. We perform regular cross calibrations (Xcals) of our PET scanners, including the Siemens mMR PET/MR, with a Siemens mCT water phantom. We evaluate the mMR cross calibration stability over a 3-year period. Recently, the mMR software (VB20P) offered the option of using predefined μ-maps. We evaluated this option by using either the predefined μ-map of the long mMR water phantom or a system-integrated user defined CT-based μ-map of the mCT water phantom used for Xcal. On 54 cross calibrations that were acquired over 3 years, the mMR on average underestimated the concentration by 16% due to the use of MR-based μ-maps. The mMR produced the narrowest range and lowest standard deviation of the Xcal ratios, implying it and is the most stable of the 6 scanners included in this study over a 3 year period. With correctly segmented μ-maps, the mMR produced Xcal ratios of 1.00-1.02, well within the acceptance range [0.95-1.05]. Measuring the concentration in a centrally placed cylindrical VOI allows for some robustness against misregistration of the μ-maps but it should be no more than a few millimeters in the x-y plane, while the tolerance is larger on the z-axis (when, as always with PET, keeping clear of the axial edges of the FOV). The mMR is the most stable scanner in this study and the mean underestimation is no longer an issue with the easily accessible μ-map, which in all 7 tests resulted in correct Xcal ratios. We will share the user defined μ-map of the mCT phantom and the protocol with interested mMR users.

Sustainable cities: A research by McKinsey and Siemens on sustainable development in London

Energy Technology Data Exchange (ETDEWEB)

Denig, Stefan

2010-09-15

The research Sustainable Urban Infrastructure conducted by McKinsey and Company and Siemens assesses technological levers of varying effectiveness, and with different cost implications, which can all contribute to greater environmental sustainability in cities, drawing in particular on the example of London. It's the first comprehensive research focusing on technological and economic implications of a city's infrastructure management in the fields of energy, buildings and transportation. The encouraging message is that many of the levers to reduce energy consumption and CO2 emissions in urban agglomerations not only help protect the environment, but also pay back from an economic point of view.

Implementing Open Innovation: The Case of Natura, IBM and Siemens

Directory of Open Access Journals (Sweden)

Cely Ades

2013-05-01

Full Text Available This paper analyses three case firms whose innovation management processes have been consolidated. The companies Natura, IBM (Brazilian Subsidiary and Siemens (ChemTech/Brazil were studied with the purpose of analysing the implementation of OI, particularly in terms of: (a its alignment with existing corporate strategy; (b its requirements such as culture, skill and motivation; (c the strategy and the implementation process; (d the results achieved (e the present barriers and enablers. The research is qualitative in nature and employs a descriptive approach. The main results of this study, obtained using a method called ‘Collective Subject Speech’ , show that the implementation of OI, both structured and non-structured, is mainly challenged by cultural issues. It has been observed that the implementation of OI process is at its embryonic stage in all case firms and that this occurs along with investments in closed innovation, meaning that OI results cannot be explored at this stage of the implementation, as there is a long way to consolidate these practices in the case firms studied.

Three steam generator replacement projects in 1995: Consortium Siemens Framatome is well prepared to contribute its experience to the SGR at the Krsko NPP

International Nuclear Information System (INIS)

Holz, R.; Clavier, G.

1996-01-01

Since the companies Siemens AG and Framatome S.A. joined their experience and efforts in the field of steam generators replacements and formed a consortium in 1991, the following projects were performed in 1995: Ringhals 3, Tihange 3 and Asco 2. Further projects will follow in 1996, i.e., Doel 4 and Asco 2. Currently, this European consortium is bidding for the contract to replace the steam generators at the Krsko NPP and hopes to be awarded in 1996. An overview of the way the Consortium Siemens and Framatome approaches SG replacement projects is given based on the projects performed in 1995. Various aspects of project planning, management, licensing, personnel qualification and techniques used on site will be discussed. (author)

Ghosting effect in Siemens electronic portal imaging devices (EPIDs) for step and shoot IMRT dosimetry

International Nuclear Information System (INIS)

Deshpande, S.; Vial, P.; Goozee, G.; Holloway, L.

2010-01-01

Full text: To assess the ghosting effect of a Siemens EPID (Optivue 1000: while acquiring IMRT fluence with step and shoot delivery. Six sets of segmented fields with 1,2,3,5, J( and 20 monitor units (MU) per segment were designed. Each set consisted of ten segments of equal MU and field size (J 0 x 10 cm 2 ) Standard single fields (non-segmented) of the same total MU as the segmented fields were also created (10-200 MU). EPID images for these fields were acquired with multi-frame acquisition mode. The integrated EPID response was determined as the mean central 20 x 21 pixel readout multiplied by the number of frames. The same fields wen measured with an ionization chamber at a depth of dose maximum in, solid water phantom. The total signal measured from the segmented fields was compared to the corresponding non-segmented fields. The ratio of EPID response between segmented and non-segmented delivery indicates an under-response for segmented fields by 5, 4, 2.5 and 2% for 1,2,3, and 5 MU per segment exposures respectively compared to ionisation chamber response (se Fig. I). The ratio was within 2% for 5 MU per segment and above. Th error bar in Fig. I indicate the intra-segment response variation. The Siemens EPID exhibited significant ghosting effect and variation in response for small M U segments. EPID dosimetry ( IMRT fields with less than 5 MU per segment requires corrections t maintain dose calibration accuracy to within 2%. (author)

Cogeneration steam turbines from Siemens: New solutions

Science.gov (United States)

Kasilov, V. F.; Kholodkov, S. V.

2017-03-01

The Enhanced Platform system intended for the design and manufacture of Siemens AG turbines is presented. It combines organizational and production measures allowing the production of various types of steam-turbine units with a power of up to 250 MWel from standard components. The Enhanced Platform designs feature higher efficiency, improved reliability, better flexibility, longer overhaul intervals, and lower production costs. The design features of SST-700 and SST-900 steam turbines are outlined. The SST-700 turbine is used in backpressure steam-turbine units (STU) or as a high-pressure cylinder in a two-cylinder condensing turbine with steam reheat. The design of an SST-700 single-cylinder turbine with a casing without horizontal split featuring better flexibility of the turbine unit is presented. An SST-900 turbine can be used as a combined IP and LP cylinder (IPLPC) in steam-turbine or combined-cycle power units with steam reheat. The arrangements of a turbine unit based on a combination of SST-700 and SST-900 turbines or SST-500 and SST-800 turbines are presented. Examples of this combination include, respectively, PGU-410 combinedcycle units (CCU) with a condensing turbine and PGU-420 CCUs with a cogeneration turbine. The main equipment items of a PGU-410 CCU comprise an SGT5-4000F gas-turbine unit (GTU) and STU consisting of SST-700 and SST-900RH steam turbines. The steam-turbine section of a PGU-420 cogeneration power unit has a single-shaft turbine unit with two SST-800 turbines and one SST-500 turbine giving a power output of N el. STU = 150 MW under condensing conditions.

Siemens IT solutions for power sector. PROFIT solutions

International Nuclear Information System (INIS)

Lunter, P.

2004-01-01

The cost reduction, flexibility and revenue increase, potential exploitation, productivity increase, and business opportunities exploitation - that is all what can be required in the races for the promonent positioning on the electricity power market. These requirements can be realized by the sophisticated IT solutions hand-tailored to the special requirements of the electric power producers and tradesmen. This approach makes it possible to achieve greater profit. Our solutions 'PROFIT Solutions', that are symbiosis of the most progressive information technologies and the power plant techniques of the company Siemens, satisfy submitted specifications in substantial measure. The system solutions 'PROFIT Solutions' comprise three solution groups: process, operation a business. The solutions of the group 'IT Process Solutions' increase flexibility and manoeuvrability of equipment, improve the efficiency and contribute to more economical operation of the power generation. Solutions 'IT Process Solutions' simplify and shorten the period of power cycles and conduce to higher labour productivity. Solutions group 'IT Process Solutions' approaches equipment to the market - supports the profit strategies, helps quickly and expertly to determine and predict hazards. The extension PROFIT Cockpit means the nuance to the solutions world 'PROFIT Solutions'. The survey about the whole installation is within reach at the simple touch of a button. It is possible to compile the total system part by part from single solutions 'PROFIT Solutions'. As a matter of fact all single parts can be interconnected with already existing solutions. Routines 'PROFIT Solutions' cooperate with all modern control systems. (author)

6 MV dosimetric characterization of the 160 MLC, the new Siemens multileaf collimator

International Nuclear Information System (INIS)

Tacke, Martin B.; Nill, Simeon; Haering, Peter; Oelfke, Uwe

2008-01-01

New technical developments constantly aim at improving the outcome of radiation therapy. With the use of a computer-controlled multileaf collimator (MLC), the quality of the treatment and the efficiency in patient throughput is significantly increased. New MLC designs aim to further enhance the advantages. In this article, we present the first detailed experimental investigation of the new 160 MLC TM , Siemens Medical Solutions. The assessment included the experimental investigation of typical MLC characteristics such as leakage, tongue-and-groove effect, penumbra, leaf speed, and leaf positioning accuracy with a 6 MV treatment beam. The leakage is remarkably low with an average of 0.37% due to a new design principle of slightly tilted leaves instead of the common tongue-and-groove design. But due to the tilt, the triangular tongue-and-groove effect occurs. Its magnitude of approximately 19% is similar to the dose defect measured for MLCs with the common tongue-and-groove design. The average longitudinal penumbra measured at depth d max =15 mm with standard 100x100 mm 2 fields is 4.1±0.5 mm for the central range and increases to 4.9±1.3 mm for the entire field range of 400x400 mm 2 . The increase is partly due to the single-focusing design and the large distance between the MLC and the isocenter enabling a large patient clearance. Regarding the leaf speed, different velocity tests were performed. The positions of the moving leaves were continuously recorded with the kilovoltage-imaging panel. The maximum leaf velocities measured were 42.9±0.6 mm/s. In addition, several typical intensity-modulated radiation therapy treatments were performed and the delivery times compared to the Siemens OPTIFOCUS MLC. An average decrease of 11% in delivery time was observed. The experimental results presented in this article indicate that the dosimetric characteristics of the 160 MLC are capable of improving the quality of dose delivery with respect to precision and dose

Not the market allowing to quickly pocket money. Siemens/KWU and their commitments in Central and Eastern Europe

International Nuclear Information System (INIS)

Schwegmann, P.

1997-01-01

After the break-up of the Eastern Bloc, Siemens very soon concluded strategic alliances with the big and most qualified Russian power plant manufacturers, busy activities currently focusing on the nuclear sector with retrofitting and safety engineering work in a number of NPPs. Points of main interest are systems analysis, recurrent inspection of primary loop components, and the installation of diagnostic systems for operational monitoring, as well as the instrumentation and control systems. (Orig./RHM) [de

76 FR 78910 - Decision and Order Granting a Waiver to LG Electronics U.S.A., Inc. From the Department of Energy...

Science.gov (United States)

2011-12-20

... granted to Mitsubishi, Fujitsu General Ltd. (Fujitsu), Samsung Air Conditioning (Samsung), Daikin, Sanyo... characteristics similar to the commercial multi-split products manufactured by Mitsubishi, as well as by Samsung... V III VRF multi-split equipment, for compliance, marketing, or other purposes, LG must fairly...

Quantitative comparison of PET performance—Siemens Biograph mCT and mMR

Energy Technology Data Exchange (ETDEWEB)

Karlberg, Anna M.; Sæther, Oddbjørn [Department of Radiology and Nuclear Medicine, St. Olavs Hospital, Olav Kyrres gt 17, 7006 Trondheim (Norway); Eikenes, Live [Department of Circulation and Medical Imaging, Norwegian University of Science and Technology, Postbox 8905, 7491 Trondheim (Norway); Goa, Pål Erik [Department of Radiology and Nuclear Medicine, St. Olavs Hospital, Olav Kyrres gt 17, 7006 Trondheim (Norway); Department of Physics, Norwegian University of Science and Technology, Trondheim (Norway)

2016-02-25

Integrated clinical whole-body PET/MR systems were introduced in 2010. In order to bring this technology into clinical usage, it is of great importance to compare the performance with the well-established PET/CT. The aim of this study was to evaluate PET performance, with focus on image quality, on Siemens Biograph mMR (PET/MR) and Siemens Biograph mCT (PET/CT). A direct quantitative comparison of the performance characteristics between the mMR and mCT system was performed according to National Electrical Manufacturers Association (NEMA) NU 2-2007 protocol. Spatial resolution, sensitivity, count rate and image quality were evaluated. The evaluation was supplemented with additional standardized uptake value (SUV) measurements. The spatial resolution was similar for the two systems. Average sensitivity was higher for the mMR (13.3 kcps/MBq) compared to the mCT system (10.0 kcps/MBq). Peak noise equivalent count rate (NECR) was slightly higher for the mMR (196 kcps @ 24.4 kBq/mL) compared to the mCT (186 kcps @ 30.1 kBq/mL). Scatter fractions in the clinical activity concentration range yielded lower values for the mCT (34.9 %) compared to those for the mMR (37.0 %). Best image quality of the systems resulted in approximately the same mean hot sphere contrast and a difference of 19 percentage points (pp) in mean cold contrast, in favour of the mCT. In general, point spread function (PSF) increased hot contrast and time of flight (TOF) increased both hot and cold contrast. Highest hot contrast for the smallest sphere (10 mm) was achieved with the combination of TOF and PSF on the mCT. Lung residual error was higher for the mMR (22 %) than that for the mCT (17 %), with no effect of PSF. With TOF, lung residual error was reduced to 8 % (mCT). SUV was accurate for both systems, but PSF caused overestimations for the 13-, 17- and 22-mm spheres. Both systems proved good performance characteristics, and the PET image quality of the mMR was close to that of the m

Siemens solar CIS photovoltaic module and system performance at the National Renewable Energy Laboratory

Energy Technology Data Exchange (ETDEWEB)

Strand, T.; Kroposki, B.; Hansen, R. [National Renewable Energy Lab., Golden, CO (United States); Willett, D. [Siemens Solar Industries, Camarillo, CA (United States)

1996-05-01

This paper evaluates the individual module and array performance of Siemens Solar Industries copper indium diselenide (CIS) polycrystalline thin-film technology. This is accomplished by studying module and array performance over time. Preliminary temperature coefficients for maximum power, maximum-power voltage, maximum-power current, open-circuit voltage, short-circuit current, and fill factor are determined at both the module and array level. These coefficients are used to correct module/array performance to 25{degrees}C to evaluate stability. The authors show that CIS exhibits a strong inverse correlation between array power and back-of-module temperature. This is due mainly to the narrow bandgap of the CIS material, which results in a strong inverse correlation between voltage and temperature. They also show that the temperature-corrected module and array performance has been relatively stable over the evaluation interval ({approx}2 years).

Development of system design in recent Siemens/KWU PWR influenced by PSA results

International Nuclear Information System (INIS)

Feigel, A.; Fabian, H.

1989-01-01

This paper reports on the design of the latest Siemens/KWU PWRs (Convoy plants) which is checked by a PSA, performed as a Δ-analysis to the German Risk Study (GPRA), which used a PWR 1300 MW in commercial operation since 1977 as a reference plant. The 10 years difference in the design between the reference plant and the Convoy plants, led to design changes, due to operational experience and findings from GPRA, Phase A. These are evaluated quantitatively by a PSA with respect to plat safety level and balance of the safety concept. The results gained from the Convoy PSA showed the importance and appropriateness of these modifications. Even if the latest results from GPRA, Phase B are considered with respect to additional accident sequences, it can be demonstrated that the new design is balanced with respect to these additional sequences. So no need exists to improve the new design any more

Type testing of the Siemens Plessey electronic personal dosemeter.

Science.gov (United States)

Hirning, C R; Yuen, P S

1995-07-01

This paper presents the results of a laboratory assessment of the performance of a new type of personal dosimeter, the Electronic Personal Dosemeter made by Siemens Plessey Controls Limited. Twenty pre-production dosimeters and a reader were purchased by Ontario Hydro for the assessment. Tests were performed on radiological performance, including reproducibility, accuracy, linearity, detection threshold, energy response, angular response, neutron response, and response time. There were also tests on the effects of a variety of environmental factors, such as temperature, humidity, pulsed magnetic and electric fields, low- and high-frequency electromagnetic fields, light exposure, drop impact, vibration, and splashing. Other characteristics that were tested were alarm volume, clip force, and battery life. The test results were compared with the relevant requirements of three standards: an Ontario Hydro standard for personal alarming dosimeters, an International Electrotechnical Commission draft standard for direct reading personal dose monitors, and an International Electrotechnical Commission standard for thermoluminescence dosimetry systems for personal monitoring. In general, the performance of the Electronic Personal Dosemeter was found to be quite acceptable: it met most of the relevant requirements of the three standards. However, the following deficiencies were found: slow response time; sensitivity to high-frequency electromagnetic fields; poor resistance to dropping; and an alarm that was not loud enough. In addition, the response of the electronic personal dosimeter to low-energy beta rays may be too low for some applications. Problems were experienced with the reliability of operation of the pre-production dosimeters used in these tests.

Report on the interpretation of critical experiments in the Siemens-Argonaut-Reactor Graz to study water ingress into spherical elements. Ergebnisbericht zur Auslegung kritischer Experimente am Siemens-Argonaut-Reaktor Graz zum Studium des Wassereinbruches im Kugelhaufen

Energy Technology Data Exchange (ETDEWEB)

Schuerrer, F [Technische Univ., Graz (Austria). Inst. fuer Theoretische Physik und Reaktorphysik; Neef, R D [Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Reaktorentwicklung

1979-04-15

The experiments described are of interest in the study of water contamination in HTR fuel elements. The Siemens Argonaut Reactor (SAR) has been considered as a research tool for a simulation experiment. Following a brief description of the SAR, planned programs are discussed in 'dry' and 'wet' cores. Detector foil types and locations are noted. A theoretical model is developed and nuclide concentrations estimated in the various spectral zones. Reactivity calculations have been made and are summarised for various H{sub 2}O percentage concentrations. The discussion is supported by simplified core layout diagrams and graphs of core flux distributions. Neutron diffusion and spectra calculations are referenced to computer programs used by KFA-Juelich, published elsewhere, and include GAM, THERMOS, MUPO and EXTERMINATOR-2. (G.C.)

Projects of Modifications of design for mitigation of accidents outside the design Bases on nuclear Central PWR Siemens-KWU and Westinghouse; Proyectos de Modificaciones de Sieno para Mitigacion de Accidentes fuera de la Bases de Diseno en Centrales Nucleares PWR Siemens-KWU y Westinghouse

Energy Technology Data Exchange (ETDEWEB)

Dominguez Gonzalez, G.; Cano Rodriguez, L. A.; Arguello Tara, A.

2014-07-01

Following the accident at the Japanese Fukushima-Daiichi NPP, the different regulators of nuclear power generation have required numerous reports regarding the evaluation and modification of the capacity of the plants to face accidents with severities beyond that established in their Design Bases. Under this new scenario, with multiple new demands and commitments, EA has carried out the required works for the implementation of strategies to mitigate the consequences of beyond Design Basis accidents for utilities owning Siemens-KWU and Westinghouse PWR nuclear power plants. (Author)

A Study of GSZO TFTs for Fabrication on Plastic Substrates

Science.gov (United States)

2014-01-01

structure as well as semiconductor/insulator interface. Identification and controllability of these traps are needed to overcome this problem. Finally this...due to various point defects formed in its hexagonal wurtzite structure and at 34 11 the interface between the oxide and channel. Identification ...Fujitsu Lauches New Lineup of FMV Series PCs with Four New Models. http://www.fujitsu.com/global/news/pr/archives/month/2013/20130605-01.html. 2013. [16

Application of self-assessment in the nuclear fuel supply activities of Siemens AG

International Nuclear Information System (INIS)

Nilson, F.; Schaule, B.

2000-01-01

The quality of fuel assemblies supplied to our customers is defined by more than just their expected functionality (performance) during reactor operation and beyond but also by their cost (price) and the timeliness of their supply (including related services). This perspective implies a comprehensive view of the quality of business, - the same focus that the IAEA Code, Basic Requirement 9, addresses regarding management self-assessment. Siemens has adopted a comprehensive management philosophy in the Nuclear Fuels Business in the early Nineties under the header of 'TQM' that is similar to the one mentioned above. For this approach we found valuable guidance in the Business Excellence model of the European Foundation for Quality Management (EFQM) which is comparable to the self-assessment criteria listed by IAEA. In this contribution we are presenting examples and experiences of how such system of self-assessment and continuous improvement was implemented by senior management. Our experience of more than 6 years of TQM and 4 years of self-assessment yielded an increasing alignment and focus of our organization and all its members on the continuous improvement of our processes (business, management and support) - on the way to a learning organization. (author)

Performance evaluation of Siemens E.CAM(R) SPECT system at Korle-Bu Teaching Hospital (Ghana)

International Nuclear Information System (INIS)

Sosu, E.K.; Hasford, F.; Amuasi, J.H.

2011-01-01

Performance evaluation tests on Siemens e.cam(R) Signature Series Single Photon Emission Computed Tomography (SPECT)System at Korle-Bu Teaching Hospital (Ghana) were conducted for compliance with Manufacturer's specifications and user's requirements. The tests were performed according to National Electrical Manufacturer's Association protocols, and different measuring instruments and phantoms containing 99m-Tc were used. Extrinsic uniformity, system energy resolution, system spatial resolution (without scattering), detector shield leakage and system planar sensitivity were evaluated. The system energy resolution measured was 9.38 % as against manufacturer's specification of ≤ 9.9 %, Planar sensitivity value measured was 232.92 c/min/mCi while manufacturers' specification was 202 c/min/mCi, and detector shield leakage values measured were 0.001 %, 0.002 % and 0.025 % against an accepted value of < 1 %. The performance evaluation confirmed that the system met requirements for clinical nuclear medicine imaging, and the values could be used as database for future quality control measurements. (au)

Accurate Modeling of The Siemens S7 SCADA Protocol For Intrusion Detection And Digital Forensic

Directory of Open Access Journals (Sweden)

Amit Kleinmann

2014-09-01

Full Text Available The Siemens S7 protocol is commonly used in SCADA systems for communications between a Human Machine Interface (HMI and the Programmable Logic Controllers (PLCs. This paper presents a model-based Intrusion Detection Systems (IDS designed for S7 networks. The approach is based on the key observation that S7 traffic to and from a specific PLC is highly periodic; as a result, each HMI-PLC channel can be modeled using its own unique Deterministic Finite Automaton (DFA. The resulting DFA-based IDS is very sensitive and is able to flag anomalies such as a message appearing out of its position in the normal sequence or a message referring to a single unexpected bit. The intrusion detection approach was evaluated on traffic from two production systems. Despite its high sensitivity, the system had a very low false positive rate - over 99.82% of the traffic was identified as normal.

Status of Siemens steam generator design and measures to assure continuous long-term reliable operation

International Nuclear Information System (INIS)

Hoch, G.

1999-01-01

Operating pressurized water reactors with U-tube steam generators have encountered difficulties with either one or a combination of inadequate material selection, poor design or manufacturing and an insufficient water chemistry control which resulted in excessive tube degradation. In contrast to the above mentioned problems, steam generators from Siemens/KWU are proving by operating experience that all measures undertaken at the design stage as well as during the operating and maintenance phase were effective enough to counteract any tube corrosion phenomena or other steam generator related problem. An Integrated Service Concept has been developed, applied and wherever necessary improved in order to ensure reliable steam generator operation. The performance of the steam generators is updated continuously, evaluated and implemented in lifetime databases. The main indicator for steam generator integrity are the results of the eddy current testing of the steam generator tubes. Tubes with indications are rated with lifetime threshold values and if necessary plugged, based on individual assessment criteria.(author)

Accuracy evaluation of distance inverse square law in determining virtual electron source location in Siemens Primus linac.

Science.gov (United States)

Douk, Hamid Shafaei; Aghamiri, Mahmoud Reza; Ghorbani, Mahdi; Farhood, Bagher; Bakhshandeh, Mohsen; Hemmati, Hamid Reza

2018-01-01

The aim of this study is to evaluate the accuracy of the inverse square law (ISL) method for determining location of virtual electron source ( S Vir ) in Siemens Primus linac. So far, different experimental methods have presented for determining virtual and effective electron source location such as Full Width at Half Maximum (FWHM), Multiple Coulomb Scattering (MCS), and Multi Pinhole Camera (MPC) and Inverse Square Law (ISL) methods. Among these methods, Inverse Square Law is the most common used method. Firstly, Siemens Primus linac was simulated using MCNPX Monte Carlo code. Then, by using dose profiles obtained from the Monte Carlo simulations, the location of S Vir was calculated for 5, 7, 8, 10, 12 and 14 MeV electron energies and 10 cm × 10 cm, 15 cm × 15 cm, 20 cm × 20 cm and 25 cm × 25 cm field sizes. Additionally, the location of S Vir was obtained by the ISL method for the mentioned electron energies and field sizes. Finally, the values obtained by the ISL method were compared to the values resulted from Monte Carlo simulation. The findings indicate that the calculated S Vir values depend on beam energy and field size. For a specific energy, with increase of field size, the distance of S Vir increases for most cases. Furthermore, for a special applicator, with increase of electron energy, the distance of S Vir increases for most cases. The variation of S Vir values versus change of field size in a certain energy is more than the variation of S Vir values versus change of electron energy in a certain field size. According to the results, it is concluded that the ISL method can be considered as a good method for calculation of S Vir location in higher electron energies (14 MeV).

Outpatients flow management and ophthalmic electronic medical records system in university hospital using Yahgee Document View.

Science.gov (United States)

Matsuo, Toshihiko; Gochi, Akira; Hirakawa, Tsuyoshi; Ito, Tadashi; Kohno, Yoshihisa

2010-10-01

General electronic medical records systems remain insufficient for ophthalmology outpatient clinics from the viewpoint of dealing with many ophthalmic examinations and images in a large number of patients. Filing systems for documents and images by Yahgee Document View (Yahgee, Inc.) were introduced on the platform of general electronic medical records system (Fujitsu, Inc.). Outpatients flow management system and electronic medical records system for ophthalmology were constructed. All images from ophthalmic appliances were transported to Yahgee Image by the MaxFile gateway system (P4 Medic, Inc.). The flow of outpatients going through examinations such as visual acuity testing were monitored by the list "Ophthalmology Outpatients List" by Yahgee Workflow in addition to the list "Patients Reception List" by Fujitsu. Patients' identification number was scanned with bar code readers attached to ophthalmic appliances. Dual monitors were placed in doctors' rooms to show Fujitsu Medical Records on the left-hand monitor and ophthalmic charts of Yahgee Document on the right-hand monitor. The data of manually-inputted visual acuity, automatically-exported autorefractometry and non-contact tonometry on a new template, MaxFile ED, were again automatically transported to designated boxes on ophthalmic charts of Yahgee Document. Images such as fundus photographs, fluorescein angiograms, optical coherence tomographic and ultrasound scans were viewed by Yahgee Image, and were copy-and-pasted to assigned boxes on the ophthalmic charts. Ordering such as appointments, drug prescription, fees and diagnoses input, central laboratory tests, surgical theater and ward room reservations were placed by functions of the Fujitsu electronic medical records system. The combination of the Fujitsu electronic medical records and Yahgee Document View systems enabled the University Hospital to examine the same number of outpatients as prior to the implementation of the computerized filing system.

Modelling the Siemens SOMATOM Sensation 64 Multi-Slice CT (MSCT) Scanner

International Nuclear Information System (INIS)

Amin, A T Mohd; Rahni, A A Abd

2017-01-01

Reconstructing large volumetric 3D images with minimal radiation dosage exposure with reduced scanning time has been one of the main objectives in the advancement of CT development. One of its advancement is the introduction of multi-slice arc detector geometry from a cone-beam source in third generation scanners. In solving this complex geometry, apart from the known vast computations in CT image reconstruction due to large CT images, iterative reconstruction methods are preferred compared to analytic methods due to its flexibility in image reconstruction. A scanner of interest that has this type of geometry is the Siemens SOMATOM Sensation 64 Multi-Slice CT (MSCT) Scanner , which has a total of 32 slices with 672 detector elements on each slice. In this paper, the scanner projection is modelled via the intersecting lengths between each ray (exhibited from the source to the detector elements) with the scanned image voxels, which are evaluated using the classical Siddon’s algorithm to generate the system matrix, H . This is a prerequisite to perform various iterative reconstruction methods, which involves solving the inverse problem arising from the linear equation: S = H· I; where S is the projections produced from the image, I. Due to the ‘cone-beam geometry’ along the z -axis, the effective field-of-view (FOV) with voxel dimensions (0.4×0.4×0.4) mm 3 is 512×512×32 voxels. The scanner model is demonstrated by reconstructing an image from simulated projections using the analytic Feldkamp-Davis-Kress (FDK) method against basic iterative image reconstruction methods. (paper)

Acceptance testing of Siemens e.cam SPECT system at the Korle-Bu Teaching Hospital

International Nuclear Information System (INIS)

Sosu, K. E.

2006-01-01

Acceptance testing has been performed on the Siemens e.cam Signature Series (Single Head) Single Photon Emission Computed Tomography (SPECT) system; the first of its kind, at the Nuclear Medicine Department, Korle-Bu Teaching Hospital, Accra. The various tests were performed according to NEMA NU 1 (2001) specifications as far as possible. The most important parameters that characterized the performance of the camera, gantry system, patient bed, collimators, computer system and fundamental software were evaluated based on visual inspection techniques. Various measuring instruments, different kinds of phantoms, point and flood sources containing 99m-Tc were also used for quantitative studies. Tests performed were divided into Physical inspection, intrinsic measurements (without collimator), extrinsic measurements (with collimator) and Single Photon Emission Computed Tomography (SPECT) system measurement. Some results obtained were better than factory specifications, others were within specifications. Other results obtained from this study which did not have factory specifications for comparison can serve as baseline for future measurements and quality control. Although not all the tests originally planned for could be done due to the non-availability of certain phantoms and radionuclide, it had been possible to perform sufficient and relevant tests to ensure that the system had no serious problems and that it can be used for clinical nuclear medicine imaging. (au)

Comparison of dosimetric characteristics of Siemens virtual and physical wedges for ONCOR linear accelerator

Directory of Open Access Journals (Sweden)

Attalla Ehab

2010-01-01

Full Text Available Dosimetric properties of virtual wedge (VW and physical wedge (PW in 6- and 10-MV photon beams from a Siemens ONCOR linear accelerator, including wedge factors, depth doses, dose profiles, peripheral doses, are compared. While there is a great difference in absolute values of wedge factors, VW factors (VWFs and PW factors (PWFs have a similar trend as a function of field size. PWFs have stronger depth dependence than VWF due to beam hardening in PW fields. VW dose profiles in the wedge direction, in general, match very well with those of PW, except in the toe area of large wedge angles with large field sizes. Dose profiles in the nonwedge direction show a significant reduction in PW fields due to off-axis beam softening and oblique filtration. PW fields have significantly higher peripheral doses than open and VW fields. VW fields have similar surface doses as the open fields, while PW fields have lower surface doses. Surface doses for both VW and PW increase with field size and slightly with wedge angle. For VW fields with wedge angles 45° and less, the initial gap up to 3 cm is dosimetrically acceptable when compared to dose profiles of PW. VW fields in general use less monitor units than PW fields.

Efficacy of second generation lithotriptors: a multicenter comparative study of 2,206 extracorporeal shock wave lithotripsy treatments with the Siemens Lithostar, Dornier HM4, Wolf Piezolith 2300, Direx Tripter X-1 and Breakstone lithotriptors

NARCIS (Netherlands)

Bierkens, A. F.; Hendrikx, A. J.; de Kort, V. J.; de Reyke, T.; Bruynen, C. A.; Bouve, E. R.; Beek, T. V.; Vos, P.; Berkel, H. V.

1992-01-01

Extracorporeal shock wave lithotripsy (ESWL) has become the treatment of choice for urinary calculi. The good results of the first generation Dornier HM3 lithotriptor stimulated the development of second generation machines. A multicenter trial is presented involving the Siemens Lithostar, Dornier

The Quality Control of Intensity Modulated Radiation Therapy (IMRT for ONCOR Siemens Linear Accelerators Using Film Dosimetry

Directory of Open Access Journals (Sweden)

Keyvan Jabbari

2012-03-01

Full Text Available Introduction Intensity Modulated Radiation Therapy (IMRT has made a significant progress in radiation therapy centers in recent years. In this method, each radiation beam is divided into many subfields that create a field with a modulated intensity. Considering the complexity of this method, the quality control for IMRT is a topic of interest for researchers. This article is about the various steps of planning and quality control of Siemens linear accelerators for IMRT, using film dosimetry. This article in addition to review of the techniques, discusses the details of experiments and possible sources of errors which are not mentioned in the protocols and other references. Materials and Methods This project was carried out in Isfahan Milad hospital which has two Siemens ONCOR linear accelerators. Both accelerators are equipped with Multi-Leaf Collimators (MLC which enables us to perform IMRT delivery in the step-and-shoot method. The quality control consists of various experiments related to the sections of radiation therapy. In these experiments, the accuracy of some components such as treatment planning system, imaging device (CT, MLC, control system of accelerator, and stability of the output are evaluated. The dose verification is performed using film dosimetry method. The films were KODAK-EDR2, which were calibrated before the experiments. One of the important steps is the comparison of the calculated dose with planning system and the measured dose in experiments. Results The results of the experiments in various steps have been acceptable according to the standard protocols. The calibration of MLC and evaluation of the leakage through the leaves of MLC was performed by using the film dosimetry and visual check. In comparison with calculated and measured dose, more that 80% of the points have to be in agreement within 3% of the value. In our experiments, between 85 and 90% of the points had such an agreement with IMRT delivery. Conclusion

Measurement of the dosimetric parameters for low monitor units in step-and-shoot IMRT delivered by Siemens Artiste linear accelerators; Medida de los parametros dosimetricos para bajo numero de unidades monitor en IMRT segmentada estatica administrada por aceleradores lineales Siemens Artiste

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Rodriguez, C.; Lopez Fernandez, A.; Saez Beltran, M.; Martin Martin, G.; Alonso Iracheta, L.

2012-07-01

Absorbed dose linearity and beam stability, both for low monitor units, are important factors for ensuring planned dose delivery in step-and-shoot IMRT. For Siemens Artiste linear accelerators, under IMRT stable irradiation conditions and for a single segment of 20 cm x 20 cm field size, the linearity of the absorbed dose with the monitor units, field flatness and symmetry have been measured for the range between 1 and 10 monitor units. We have found that absorbed dose linearity with monitor units is within 2% down to 2 monitor units and it is about 9% for 1 monitor unit. Flatness and symmetry values show variations within 1% down to 2 monitor units and increase by 9% for lower values. Using our monitor unit distribution per segment in IMRT we estimate that the uncertainty in absorbed dose for a whole treatment due to these factors is less than 1% (k= 3). (Author) 13 refs.

Duplex-cladding: Siemens answer to the requirements of extended burnup in PWRs

International Nuclear Information System (INIS)

Van Swam, L.F.; Sell, H.J.; Eberle, R.; Seibold, A.

1994-01-01

One important goal of nuclear fuel development is to increase the cost-effectiveness of the nuclear fuel cycle by burnup extension. A prerequisite for this goal is a cladding tube with high resistance to corrosion under the operating conditions of modern PWRs. Therefore, in the early eighties Siemens started to investigate the material behaviour of Zirconium based alloys also outside the composition range of Zry-4. The examination included out-of-pile corrosion testing in water and steam, with and without chemical addition, such as LiOH, in-pile testing of path finder fuel rods in a hot PWR up to 80 MWd/kgU and the investigation of mechanical behaviour, growth and creep under normal and the postulated conditions of a loss-of-coolant accident (LOCA). The evaluation of in-pile and out-of-pile experiments on alternative Zr-alloys revealed that improvements in corrosion resistance are frequently accompanied by undesirable changes in material properties which affect mechanical design and LOCA behaviour. To fulfill all requirements - the mechanical and corrosion related ones - and to retain the large experience base with Zry-4, a DUPLEX cladding was selected. The selected ELS DUPLEX cladding consists of a Zircaloy-4 tubing with a thin outer layer of an Extra Low tin (Sn) Zr-alloy. The ELS layer improves the stability against LiOH and allows operation with voided coolant. This advanced product has been engineered for use in highly enriched fuel assemblies in high efficiency plants operating with low neutron leakage core management and high coolant temperatures. It has become the accepted fuel rod cladding for many plants in Germany, Spain and Switzerland. (authors). 6 figs., 2 refs

Dosimetry verifications of the physical parameters of virtual wedge on a Siemens accelerator

International Nuclear Information System (INIS)

Zhong Heli; Li Xiaodong; Li Longxing

2002-01-01

Objective: To verify the wedge angle of virtual wedge and the relation between wedge factor and beam energy, field size, wedge angle and to study the difference in percent depth dose (PDD) of virtual wedge field, hard wedge field and open field. Methods: Using wedge angle and wedge factor of 15 degree, 30 degree, 45 degree and 60 degree virtual wedge of Siemens Mevatron 6 MV and Primus 8 MV, 18 MV X rays were measured by RFA-plus 3D water phantom and RK finger chamber the PDD of the virtual wedge field, hard wedge field and open field were measured by Kodak XV-2 verifying film and FDM-300 film dosimeter. These PDDs were normalized to Dmax then compared. Results: There was good conformation between virtual wedge measured by four point method and set value. The virtual wedge was almost equal to 1, with a maximal variation of 0.031 no matter what the value of beam energy, field size or wedge angle was. Generally, for certain energy and field size, the wedge factor of larger wedge angle was slightly larger than smaller wedge angle. For certain energy and wedge angle, the wedge factor of larger field was also a little larger than smaller field. The PDD of virtual wedge field was similar to that of open field. Conclusions: The four point method measurement for virtual wedge angle is good for daily QA. Radiotherapy of virtual wedge field is not only simpler than hard wedge field, but also spares the beam output. The PDD conferment between virtual field and open field simplifies radiation treatment planning and increases the accuracy of wedge field therapy

Photo neutron dose equivalent rate in 15 MV X-ray beam from a Siemens Primus Linac

Directory of Open Access Journals (Sweden)

A Ghasemi

2015-01-01

Full Text Available Fast and thermal neutron fluence rates from a 15 MV X-ray beams of a Siemens Primus Linac were measured using bare and moderated BF 3 proportional counter inside the treatment room at different locations. Fluence rate values were converted to dose equivalent rate (DER utilizing conversion factors of American Association of Physicist in Medicine′s (AAPM report number 19. For thermal neutrons, maximum and minimum DERs were 3.46 × 10 -6 (3 m from isocenter in +Y direction, 0 × 0 field size and 8.36 × 10 -8 Sv/min (in maze, 40 × 40 field size, respectively. For fast neutrons, maximum DERs using 9" and 3" moderators were 1.6 × 10 -5 and 1.74 × 10 -5 Sv/min (2 m from isocenter in +Y direction, 0 × 0 field size, respectively. By changing the field size, the variation in thermal neutron DER was more than the fast neutron DER and the changes in fast neutron DER were not significant in the bunker except inside the radiation field. This study showed that at all points and distances, by decreasing field size of the beam, thermal and fast neutron DER increases and the number of thermal neutrons is more than fast neutrons.

AVC/H.264 patent portfolio license

Science.gov (United States)

Skandalis, Dean A.

2006-08-01

MPEG LA, LLC offers a joint patent license for the AVC (a/k/a H.264) Standard (ISO/IEC IS 14496-10:2004). Like MPEG LA's other licenses, the AVC Patent Portfolio License is offered for the convenience of the marketplace as an alternative enabling users to access essential intellectual property owned by many patent holders under a single license rather than negotiating licenses with each of them individually. The AVC Patent Portfolio License includes essential patents owned by DAEWOO Electronics Corporation; Electronics and Telecommunications Research Institute (ETRI); France Telecom, societe anonyme; Fujitsu Limited; Hitachi, Ltd.; Koninklijke Philips Electronics N.V.; LG Electronics Inc.; Matsushita Electric Industrial Co., Ltd.; Microsoft Corporation; Mitsubishi Electric Corporation; Robert Bosch GmbH; Samsung Electronics Co., Ltd.; Sedna Patent Services, LLC; Sharp Kabushiki Kaisha; Siemens AG; Sony Corporation; The Trustees of Columbia University in the City of New York; Toshiba Corporation; UB Video Inc.; and Victor Company of Japan, Limited. Another is expected also to join as of August 1, 2006. MPEG LA's objective is to provide worldwide access to as much AVC essential intellectual property as possible for the benefit of AVC users. Therefore, any party that believes it has essential patents is welcome to submit them for evaluation of their essentiality and inclusion in the License if found essential.

SU-E-T-508: End to End Testing of a Prototype Eclipse Module for Planning Modulated Arc Therapy On the Siemens Platform

International Nuclear Information System (INIS)

Huang, L; Sarkar, V; Spiessens, S; Rassiah-Szegedi, P; Huang, Y; Salter, B; Zhao, H; Szegedi, M

2014-01-01

Purpose: The latest clinical implementation of the Siemens Artiste linac allows for delivery of modulated arcs (mARC) using full-field flattening filter free (FFF) photon beams. The maximum doserate of 2000 MU/min is well suited for high dose treatments such as SBRT. We tested and report on the performance of a prototype Eclipse TPS module supporting mARC capability on the Artiste platform. Method: our spine SBRT patients originally treated with 12/13 field static-gantry IMRT (SGIMRT) were chosen for this study. These plans were designed to satisfy RTOG0631 guidelines with a prescription of 16Gy in a single fraction. The cases were re-planned as mARC plans in the prototype Eclipse module using the 7MV FFF beam and required to satisfy RTOG0631 requirements. All plans were transferred from Eclipse, delivered on a Siemens Artiste linac and dose-validated using the Delta4 system. Results: All treatment plans were straightforwardly developed, in timely fashion, without challenge or inefficiency using the prototype module. Due to the limited number of segments in a single arc, mARC plans required 2-3 full arcs to yield plan quality comparable to SGIMRT plans containing over 250 total segments. The average (3%/3mm) gamma pass-rate for all arcs was 98.5±1.1%, thus demonstrating both excellent dose prediction by the AAA dose algorithm and excellent delivery fidelity. Mean delivery times for the mARC plans(10.5±1.7min) were 50-70% lower than the SGIMRT plans(26±2min), with both delivered at 2000 MU/min. Conclusion: A prototype Eclipse module capable of planning for Burst Mode modulated arc delivery on the Artiste platform has been tested and found to perform efficiently and accurately for treatment plan development and delivered-dose prediction. Further investigation of more treatment sites is being carried out and data will be presented

Comparison of Abbott Architect®, Siemens Immulite®, and Diasorin Liaison® for determination of Epstein-Barr virus serological diagnosis.

Science.gov (United States)

François, Catherine; Segard, Christine; Bouvier, Maryline; Stefanski, Martine; Pannier, Christine; Zawadzki, Patricia; Roussel, Catherine; Hecquet, Denise; Duverlie, Gilles; Brochot, Etienne; Castelain, Sandrine

2018-02-01

This study compared the performance of 3 automated immunoassays, Architect ® (Abbott), Immulite ® (Siemens) and Liaison ® (Diasorin), for Epstein-Barr virus (EBV) serology. Ninety-one serum samples collected in Amiens University Hospital were analyzed for the presence of Viral Capsid Antigen (VCA) IgG and IgM and Epstein-Barr Nuclear Antigen (EBNA) IgG. The agreement between the 3 assays was calculated for each marker individually and for determination of the EBV profile, based on interpretation of the combination of these 3 EBV markers. Although similar results were obtained with Architect ® and Liaison ® , several discordant results were observed with Immulite ® , particularly for EBNA IgG. A large number of EBNA IgG-positive results were observed, which interfered with interpretation of the EBV profile. In contrast, Immulite ® performed similarly to the 2 other assays for detection of VCA IgM. Copyright © 2017 Elsevier Inc. All rights reserved.

Deposition reactors for solar grade silicon: A comparative thermal analysis of a Siemens reactor and a fluidized bed reactor

Science.gov (United States)

Ramos, A.; Filtvedt, W. O.; Lindholm, D.; Ramachandran, P. A.; Rodríguez, A.; del Cañizo, C.

2015-12-01

Polysilicon production costs contribute approximately to 25-33% of the overall cost of the solar panels and a similar fraction of the total energy invested in their fabrication. Understanding the energy losses and the behaviour of process temperature is an essential requirement as one moves forward to design and build large scale polysilicon manufacturing plants. In this paper we present thermal models for two processes for poly production, viz., the Siemens process using trichlorosilane (TCS) as precursor and the fluid bed process using silane (monosilane, MS). We validate the models with some experimental measurements on prototype laboratory reactors relating the temperature profiles to product quality. A model sensitivity analysis is also performed, and the effects of some key parameters such as reactor wall emissivity and gas distributor temperature, on temperature distribution and product quality are examined. The information presented in this paper is useful for further understanding of the strengths and weaknesses of both deposition technologies, and will help in optimal temperature profiling of these systems aiming at lowering production costs without compromising the solar cell quality.

Thermalhydraulic assessment of the Pickering NGS 'B' feed and bleed system for the hot boiler chemical clean (Siemens Process)

International Nuclear Information System (INIS)

Lorencez, Carlos M.

2000-01-01

The Hot Boiler Chemical Clean (HBCC) process from Siemens, to be used in PNGS, requires that the Heat Transport System (HTS) temperature be maintained in the range 160 to 170 o C for several days. To achieve these thermalhydraulic condition, the core decay power and the pump power of the main circulating pumps in a 3-3 configuration are employed to warm up the HTS from approximately 38 o C to 170 o C. At this point, high Bleed bias is applied to the signal of the HTS pressure controller to provide high Feed and Bleed flows, which are used to control the HTS temperature by means of the Bleed Cooler. To address any concern posed by these infrequently used HTS thermalhydraulic conditions, a detailed thermalhydraulic model of the Feed and Bleed System, that also includes the Gland Supply, Gland Return and Purification systems, was developed for the TUF code to determine the suitability of the Feed and Bleed System to conduct the HBCC. The model was then used to estimate the parameters such as Feed and Bleed flows, valve openings, pressure and temperature distributions throughout the Feed and Bleed System required for the application of HBCC. (author)

78 FR 39326 - Notice Pursuant To the National Cooperative Research and Production Act of 1993-Opendaylight...

Science.gov (United States)

2013-07-01

... Clara, CA; Cyan Inc., Petaluma, CA; Dell Inc., Round Rock, TX; Ericsson Inc., San Jose, CA; Fujitsu...Daylight's planned activity is to (a) Advance the creation, evolution, promotion, and support of an open...

Strategy - The after-Fukushima of the French nuclear sector - Nuclear must be an explicit choice - Siemens, leader of a nuclear-free Germany

International Nuclear Information System (INIS)

Dupin, L.

2012-01-01

A first article comments the consequences of the Fukushima accident for the French nuclear sector: the risk of an extreme accident must be taken into account; this will result in works and investments; the cost of the French nuclear-based electricity will increase; the debate on the dismantling costs will be on again. Despite these problems, the French nuclear industry relies on its development perspectives abroad, notably in China. In an interview, the chairman of Areva discusses his first six months of action, evokes the implementation of the strategic action plan and the consequences of France's financial degradation, evokes the UraMin affair, the consequences of the Fukushima accident on Areva's offer, the costs of works required by the ASN, the perspectives for the EPR reactor, Areva's activities in the renewable energy sector. A last article comments the strategy of the German company Siemens who decided to phase out nuclear, and to focus notably of wind energy

A Multinational perspective to managing end-of-life electronics

Energy Technology Data Exchange (ETDEWEB)

Herold, M.

2007-07-01

This thesis focuses on how multinational electronics manufacturers manage used products in the EU, USA, Japan and China. Managing used or end-of-life products has interesting environmental and commercial implications. Recovering end-of-life products can reduce the environmental effects of disposal, raw material extraction, transport, and production. Whereas the commercial effects include image benefits and savings on raw material costs. Manufacturer involvement in end-of-life management is especially topical in the electronics industry, which is the focus of this thesis. Electronics products, such as TVs and computers, have been targeted with extended producer responsibility (EPR) legislation in different countries across the world. EPR is an environmental policy approach that forces manufacturers to take physical and/or financial responsibility for end-of-life products. The main objective of this dissertation was to increase understanding of how multinational manufacturers manage end-of-life products in the EU, in the USA, and in China and Japan, and the regional and company-specific factors explain their levels of involvement. This study consisted of an inductive 16-case multiple case study. The products and companies included in the study were as follows: Refrigerators (Bosch und Siemens Hausgeraete, Electrolux, Whirlpool); TVs (Samsung, Philips, Hitachi); PCs (Hewlett Packard, NEC, Fujitsu Limited and Fujitsu-Siemens Computers and an anonymous company, Alpha Computers); Mobile phones (Nokia, Motorola, Samsung); Telecommunication network equipment (Nokia, Motorola, Huawei). A manufacturer's level of involvement in end-of-life management can be characterized in terms of the level of organizational capabilities. These capabilities range from none to running a treatment facility and recovering value from own branded products. Levels in between can be characterized by outsourcing end-of-life management to industry-wide schemes, managing contracts for treating

Activity concentration measurements using a conjugate gradient (Siemens xSPECT) reconstruction algorithm in SPECT/CT.

Science.gov (United States)

Armstrong, Ian S; Hoffmann, Sandra A

2016-11-01

The interest in quantitative single photon emission computer tomography (SPECT) shows potential in a number of clinical applications and now several vendors are providing software and hardware solutions to allow 'SUV-SPECT' to mirror metrics used in PET imaging. This brief technical report assesses the accuracy of activity concentration measurements using a new algorithm 'xSPECT' from Siemens Healthcare. SPECT/CT data were acquired from a uniform cylinder with 5, 10, 15 and 20 s/projection and NEMA image quality phantom with 25 s/projection. The NEMA phantom had hot spheres filled with an 8 : 1 activity concentration relative to the background compartment. Reconstructions were performed using parameters defined by manufacturer presets available with the algorithm. The accuracy of activity concentration measurements was assessed. A dose calibrator-camera cross-calibration factor (CCF) was derived from the uniform phantom data. In uniform phantom images, a positive bias was observed, ranging from ∼6% in the lower count images to ∼4% in the higher-count images. On the basis of the higher-count data, a CCF of 0.96 was derived. As expected, considerable negative bias was measured in the NEMA spheres using region mean values whereas positive bias was measured in the four largest NEMA spheres. Nonmonotonically increasing recovery curves for the hot spheres suggested the presence of Gibbs edge enhancement from resolution modelling. Sufficiently accurate activity concentration measurements can easily be measured on images reconstructed with the xSPECT algorithm without a CCF. However, the use of a CCF is likely to improve accuracy further. A manual conversion of voxel values into SUV should be possible, provided that the patient weight, injected activity and time between injection and imaging are all known accurately.

Networking for high energy physics in Japan

International Nuclear Information System (INIS)

Karita, Yukio; Abe, Fumio; Hirose, Hitoshi; Goto, Hiroyuki; Ogasawara, Ryusuke; Yuasa, Fukuko; Banno, Yoshiaki; Yasu, Yoshiji

1989-01-01

The computer network for high energy physics in Japan has grown over the last five or six years and is still expanding. Its original purpose was to provide the collaborators in universities access to the computing resources in KEK. Adding to the remote login from terminals, VAXs or Fujitsu computers located in universities have been connected to KEK's computers by DECnet or FNA (Fujitsu's SNA) and have formed the ''Japanese HEPnet''. Since the link between LBL and KEK was established in June 1987, the Japanese HEPnet is combined with the American HEPnet and is an indispensable tool for international collaboration. The current communication media for Japanese HEPnet, leased lines and public X.25, are being replaced by Gakujo-net (Monbusho's inter-university private X.25 network). DECnet, FNA, IP and Ethernet-bridge will run on Gakujo-net for the Japanese HEPnet. (orig.)

Particle simulation on a distributed memory highly parallel processor

International Nuclear Information System (INIS)

Sato, Hiroyuki; Ikesaka, Morio

1990-01-01

This paper describes parallel molecular dynamics simulation of atoms governed by local force interaction. The space in the model is divided into cubic subspaces and mapped to the processor array of the CAP-256, a distributed memory, highly parallel processor developed at Fujitsu Labs. We developed a new technique to avoid redundant calculation of forces between atoms in different processors. Experiments showed the communication overhead was less than 5%, and the idle time due to load imbalance was less than 11% for two model problems which contain 11,532 and 46,128 argon atoms. From the software simulation, the CAP-II which is under development is estimated to be about 45 times faster than CAP-256 and will be able to run the same problem about 40 times faster than Fujitsu's M-380 mainframe when 256 processors are used. (author)

Supercomputing and related national projects in Japan

International Nuclear Information System (INIS)

Miura, Kenichi

1985-01-01

Japanese supercomputer development activities in the industry and research projects are outlined. Architecture, technology, software, and applications of Fujitsu's Vector Processor Systems are described as an example of Japanese supercomputers. Applications of supercomputers to high energy physics are also discussed. (orig.)

Bias due to Preanalytical Dilution of Rodent Serum for Biochemical Analysis on the Siemens Dimension Xpand Plus

Directory of Open Access Journals (Sweden)

Jennifer L. Johns

2018-02-01

Full Text Available Clinical pathology testing of rodents is often challenging due to insufficient sample volume. One solution in clinical veterinary and exploratory research environments is dilution of samples prior to analysis. However, published information on the impact of preanalytical sample dilution on rodent biochemical data is incomplete. The objective of this study was to evaluate the effects of preanalytical sample dilution on biochemical analysis of mouse and rat serum samples utilizing the Siemens Dimension Xpand Plus. Rats were obtained from end of study research projects. Mice were obtained from sentinel testing programs. For both, whole blood was collected via terminal cardiocentesis into empty tubes and serum was harvested. Biochemical parameters were measured on fresh and thawed frozen samples run straight and at dilution factors 2–10. Dilutions were performed manually, utilizing either ultrapure water or enzyme diluent per manufacturer recommendations. All diluted samples were generated directly from the undiluted sample. Preanalytical dilution caused clinically unacceptable bias in most analytes at dilution factors four and above. Dilution-induced bias in total calcium, creatinine, total bilirubin, and uric acid was considered unacceptable with any degree of dilution, based on the more conservative of two definitions of acceptability. Dilution often caused electrolyte values to fall below assay range precluding evaluation of bias. Dilution-induced bias occurred in most biochemical parameters to varying degrees and may render dilution unacceptable in the exploratory research and clinical veterinary environments. Additionally, differences between results obtained at different dilution factors may confound statistical comparisons in research settings. Comparison of data obtained at a single dilution factor is highly recommended.

Dose linearity and uniformity of Siemens ONCOR impression plus linear accelerator designed for step-and-shoot intensity-modulated radiation therapy

Directory of Open Access Journals (Sweden)

Bhangle Janhavi

2007-01-01

Full Text Available For step-and-shoot type delivery of intensity-modulated radiation therapy (IMRT, beam stability characteristics during the first few monitor units need to be investigated to ensure the planned dose delivery. This paper presents the study done for Siemens ONCOR impression plus linear accelerator before commissioning it for IMRT treatment. The beam stability for 6 and 15 MV in terms of dose monitor linearity, monitor unit stability and beam uniformity is investigated in this work. Monitor unit linearity is studied using FC65G chamber for the range 1-100 MU. The dose per MU is found to be linear for small monitor units down to 1 MU for both 6 and 15 MV beams. The monitor unit linearity is also studied with portal imaging device for the range 1-20 MU for 6 MV beam. The pixel values are within ±1σ confidence level up to 2 MU; for 1 MU, the values are within ±2σ confidence level. The flatness and symmetry analysis is done for both energies in the range of 1-10 MU with Kodak diagnostic films. The flatness and symmetry are found to be within ±3% up to 2 MU for 6 MV and up to 3 MU for 15 MV.

Dose linearity and uniformity of Siemens ONCOR impression plus linear accelerator designed for step-and-shoot intensity-modulated radiation therapy

International Nuclear Information System (INIS)

Bhangle, Janhavi R.; Sathiya Narayanan, V.K.; Deshpande, Shrikant A.

2007-01-01

For step-and-shoot type delivery of intensity-modulated radiation therapy (IMRT), beam stability characteristics during the first few monitor units need to be investigated to ensure the planned dose delivery. This paper presents the study done for Siemens ONCOR impression plus linear accelerator before commissioning it for IMRT treatment. The beam stability for 6 and 15 MV in terms of dose monitor linearity, monitor unit stability and beam uniformity is investigated in this work. Monitor unit linearity is studied using FC65G chamber for the range 1-100 MU. The dose per MU is found to be linear for small monitor units down to 1 MU for both 6 and 15 MV beams. The monitor unit linearity is also studied with portal imaging device for the range 1-20 MU for 6 MV beam. The pixel values are within ±1σ confidence level up to 2 MU; for 1 MU, the values are within ±2σ confidence level. The flatness and symmetry analysis is done for both energies in the range of 1-10 MU with Kodak diagnostic films. The flatness and symmetry are found to be within ±3% up to 2 MU for 6 MV and up to 3 MU for 15 MV. (author)

Ultra fast, accurate PET image reconstruction for the Siemens hybrid MR/BrainPET scanner using raw LOR data

International Nuclear Information System (INIS)

Scheins, Juergen; Lerche, Christoph; Shah, Jon

2015-01-01

Fast PET image reconstruction algorithms usually use a Line-of-Response (LOR) preprocessing step where the detected raw LOR data are interpolated either to evenly spaced sinogram projection bins or alternatively to a generic projection space as for example proposed by the PET Reconstruction Software Toolkit (PRESTO) [1]. In this way, speed-optimised, versatile geometrical projectors can be implemented for iterative image reconstruction independent of the underlying scanner geometry. However, all strategies of projection data interpolation unavoidably lead to a loss of original information and result in some degradation of image quality. Here, direct LOR reconstructions overcome this evident drawback at cost of a massively enhanced computational burden. Therefore, computational optimisation techniques are essential to make such demanding approaches attractive and economical for widespread usage in the clinical environment. In this paper, we demonstrate for the Siemens Hybrid MR/BrainPET with 240 million physical LORs that a very fast quantitative direct LOR reconstruction can be realized using a modified version of PRESTO. Now, PRESTO is also capable to directly use sets of symmetric physical LORs instead of interpolating LORs to a generic projection space. Exploiting basic scanner symmetries together with the technique of Single Instruction Multipe Data (SIMD) and Simultaneous Multi-Threading (SMT) results in an overall calculation time of 2-3 minutes per frame on a single multi-core machine, i.e. neither requiring a cluster of mutliple machines nor Graphics Processing Units (GPUs).

Ultra fast, accurate PET image reconstruction for the Siemens hybrid MR/BrainPET scanner using raw LOR data

Energy Technology Data Exchange (ETDEWEB)

Scheins, Juergen; Lerche, Christoph; Shah, Jon [Forschungszentrum Jülich GmbH, Jülich (Germany)

2015-05-18

Fast PET image reconstruction algorithms usually use a Line-of-Response (LOR) preprocessing step where the detected raw LOR data are interpolated either to evenly spaced sinogram projection bins or alternatively to a generic projection space as for example proposed by the PET Reconstruction Software Toolkit (PRESTO) [1]. In this way, speed-optimised, versatile geometrical projectors can be implemented for iterative image reconstruction independent of the underlying scanner geometry. However, all strategies of projection data interpolation unavoidably lead to a loss of original information and result in some degradation of image quality. Here, direct LOR reconstructions overcome this evident drawback at cost of a massively enhanced computational burden. Therefore, computational optimisation techniques are essential to make such demanding approaches attractive and economical for widespread usage in the clinical environment. In this paper, we demonstrate for the Siemens Hybrid MR/BrainPET with 240 million physical LORs that a very fast quantitative direct LOR reconstruction can be realized using a modified version of PRESTO. Now, PRESTO is also capable to directly use sets of symmetric physical LORs instead of interpolating LORs to a generic projection space. Exploiting basic scanner symmetries together with the technique of Single Instruction Multipe Data (SIMD) and Simultaneous Multi-Threading (SMT) results in an overall calculation time of 2-3 minutes per frame on a single multi-core machine, i.e. neither requiring a cluster of mutliple machines nor Graphics Processing Units (GPUs).

Siemens HELICON

International Nuclear Information System (INIS)

Reichert, T.; Bittner, G.; Heinzelmann, K.G.; Solner, L.; Vetter, J.

1988-01-01

A new superconducting 2 tesla magnet for whole-body magnetic resonance imaging and spectroscopy has been developed as a serial product. The HELICON magnet has the following features: Cryogen losses including ramping losses are eliminated due to helium refrigerator cooling. The magnet size is moderate despite of a large warm bore. The magnet can be ramped in 25 min from zero field to 2 Tesla. The field stability is 5 ppm/hour immediately after ramping and settles to 1 ppm/hour within 1 hour. Shimmed homogeneity band width is less than +- 5 ppm on a 50 cm diameter spherical volume using an 11-plane field plot. The magnet can be combined with a specially designed iron-yoke shield which reduces the extension of the 0.5 tesla stray field line at 2 tesla operating field to 7.4 m axially and 5.6 m radially. Cold shipment of the magnet is possible without special precautions

An automation of design and modelling tasks in NX Siemens environment with original software - generator module

Science.gov (United States)

Zbiciak, M.; Grabowik, C.; Janik, W.

2015-11-01

Nowadays the design constructional process is almost exclusively aided with CAD/CAE/CAM systems. It is evaluated that nearly 80% of design activities have a routine nature. These design routine tasks are highly susceptible to automation. Design automation is usually made with API tools which allow building original software responsible for adding different engineering activities. In this paper the original software worked out in order to automate engineering tasks at the stage of a product geometrical shape design is presented. The elaborated software works exclusively in NX Siemens CAD/CAM/CAE environment and was prepared in Microsoft Visual Studio with application of the .NET technology and NX SNAP library. The software functionality allows designing and modelling of spur and helicoidal involute gears. Moreover, it is possible to estimate relative manufacturing costs. With the Generator module it is possible to design and model both standard and non-standard gear wheels. The main advantage of the model generated in such a way is its better representation of an involute curve in comparison to those which are drawn in specialized standard CAD systems tools. It comes from fact that usually in CAD systems an involute curve is drawn by 3 points that respond to points located on the addendum circle, the reference diameter of a gear and the base circle respectively. In the Generator module the involute curve is drawn by 11 involute points which are located on and upper the base and the addendum circles therefore 3D gear wheels models are highly accurate. Application of the Generator module makes the modelling process very rapid so that the gear wheel modelling time is reduced to several seconds. During the conducted research the analysis of differences between standard 3 points and 11 points involutes was made. The results and conclusions drawn upon analysis are shown in details.

Introduction of the new process and quality control methods in fuel fabrication at Siemens/ANF

International Nuclear Information System (INIS)

Rogge, K.T.; Fickers, H.H.; Doerr, W.

2000-01-01

system and efforts assure products of high quality and contribute herewith to the safe and economical performance of the fuel supplied by Siemens/ANF. (author)

A method of computer aided design with self-generative models in NX Siemens environment

Science.gov (United States)

Grabowik, C.; Kalinowski, K.; Kempa, W.; Paprocka, I.

2015-11-01

Currently in CAD/CAE/CAM systems it is possible to create 3D design virtual models which are able to capture certain amount of knowledge. These models are especially useful in an automation of routine design tasks. These models are known as self-generative or auto generative and they can behave in an intelligent way. The main difference between the auto generative and fully parametric models consists in the auto generative models ability to self-organizing. In this case design model self-organizing means that aside from the possibility of making of automatic changes of model quantitative features these models possess knowledge how these changes should be made. Moreover they are able to change quality features according to specific knowledge. In spite of undoubted good points of self-generative models they are not so often used in design constructional process which is mainly caused by usually great complexity of these models. This complexity makes the process of self-generative time and labour consuming. It also needs a quite great investment outlays. The creation process of self-generative model consists of the three stages it is knowledge and information acquisition, model type selection and model implementation. In this paper methods of the computer aided design with self-generative models in NX Siemens CAD/CAE/CAM software are presented. There are the five methods of self-generative models preparation in NX with: parametric relations model, part families, GRIP language application, knowledge fusion and OPEN API mechanism. In the paper examples of each type of the self-generative model are presented. These methods make the constructional design process much faster. It is suggested to prepare this kind of self-generative models when there is a need of design variants creation. The conducted research on assessing the usefulness of elaborated models showed that they are highly recommended in case of routine tasks automation. But it is still difficult to distinguish

Maritime Domain Awareness: The Key to Maritime Security Operational Challenges and Technical Solutions

Science.gov (United States)

2006-06-01

series with the Philippines, Indonesia, Singapore, Malaysia , Brunei, and the United States. Another example of regional collaboration is the South East...computers to choose from producers such as Sony , Fujitsu, Compaq, Toshiba, Macintosh or a custom-built PC. The selection depends on factors such as

EGS4 benchmark program

International Nuclear Information System (INIS)

Yasu, Y.; Hirayama, H.; Namito, Y.; Yashiro, S.

1995-01-01

This paper proposes EGS4 Benchmark Suite which consists of three programs called UCSAMPL4, UCSAMPL4I and XYZDOS. This paper also evaluates optimization methods of recent RISC/UNIX systems, such as IBM, HP, DEC, Hitachi and Fujitsu, for the benchmark suite. When particular compiler option and math library were included in the evaluation process, system performed significantly better. Observed performance of some of the RISC/UNIX systems were beyond some so-called Mainframes of IBM, Hitachi or Fujitsu. The computer performance of EGS4 Code System on an HP9000/735 (99MHz) was defined to be the unit of EGS4 Unit. The EGS4 Benchmark Suite also run on various PCs such as Pentiums, i486 and DEC alpha and so forth. The performance of recent fast PCs reaches that of recent RISC/UNIX systems. The benchmark programs have been evaluated with correlation of industry benchmark programs, namely, SPECmark. (author)

76 FR 31946 - Energy Conservation Program for Certain Industrial Equipment: Publication of the Petition for...

Science.gov (United States)

2011-06-02

... operational characteristics similar to the commercial multi-split products manufactured by Mitsubishi, Samsung... reducing its operating capacity to as little as 10% of its rated capacity. Zone diversity enables AIRSTAGE... 17528, April 9,2007); Samsung (72 FR 71387, Dec. 17, 2007); FUJITSU (72 FR 71383, Dec. 17, 2007); Daikin...

SU-C-201-07: Validation of a GATE Gamma Camera Model for the Siemens Symbia

International Nuclear Information System (INIS)

Mikell, J; Siman, W; Kappadath, S; Mourtada, F

2015-01-01

Purpose: To develop a simulation model of a clinical gamma camera/SPECT system and to validate the model using experimental and published measurements from the clinical system. Methods: Geant4 Application for Tomographic Emission (GATE) was used to create a model of the Siemens Symbia gamma camera. A modular model was implemented that allows specifying combinations of crystal thickness (3/8”, 5/8”) and collimator (LEHR, MELP, HE). Shielding, energy resolution, intrinsic resolution, crystal thickness, and collimator properties were set based on manufacturer specifications. Validation of the model was performed by simulating NEMA 2007 gamma camera tests including spatial resolution and sensitivity for Tc99; these were compared with experimental and published data for the scanner. The simulated energy spectra of a Tc99 line source in acrylic blocks was visually compared with the corresponding experimental acquisition. For a 4 cm diameter sphere filled with Tc99, the attenuation maps were generated from simulation data, and the photopeak and scatter window were extracted from GATE output using ROOT to create DICOM files to use in the clinical reconstruction. Results: Simulated spatial resolutions for LEHR 3/8” crystal at 0, 10 cm, 10 cm (with scatter), and 30 cm were 4, 6.7, 7.9, and 14.5 mm FWHM; these were 9% less than published data. For 5/8” crystal the spatial resolutions were 4.5, 7.0, 8.5, and 14.7 mm FWHM; these were 4% to 10% less than published data. Simulated sensitivity was within 3.5% of published data for both LEHR 3/8” and 5/8”. The simulated energy spectra matched the photopeak and scatter window well, but did overestimate the counts below 90 keV. The simulated attenuation map and projection data were successfully reconstructed with the clinical software, and the passed visual inspection. Conclusions: Validation of a specific clinical scanner allows future studies of quantification accuracy for both planar and SPECT imaging. Research

SU-C-201-07: Validation of a GATE Gamma Camera Model for the Siemens Symbia

Energy Technology Data Exchange (ETDEWEB)

Mikell, J; Siman, W; Kappadath, S [Department of Imaging Physics, University of Texas MD Anderson Cancer Center, Houston, TX (United States); University of Texas Graduate School of Biomedical Sciences at Houston, Houston, TX (United States); Mourtada, F [Christiana Care Hospital, Newark, DE (United States); Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston TX (United States); Department of Radiation Oncology, Thomas Jefferson University, Philadelphia, PA (United States)

2015-06-15

Purpose: To develop a simulation model of a clinical gamma camera/SPECT system and to validate the model using experimental and published measurements from the clinical system. Methods: Geant4 Application for Tomographic Emission (GATE) was used to create a model of the Siemens Symbia gamma camera. A modular model was implemented that allows specifying combinations of crystal thickness (3/8”, 5/8”) and collimator (LEHR, MELP, HE). Shielding, energy resolution, intrinsic resolution, crystal thickness, and collimator properties were set based on manufacturer specifications. Validation of the model was performed by simulating NEMA 2007 gamma camera tests including spatial resolution and sensitivity for Tc99; these were compared with experimental and published data for the scanner. The simulated energy spectra of a Tc99 line source in acrylic blocks was visually compared with the corresponding experimental acquisition. For a 4 cm diameter sphere filled with Tc99, the attenuation maps were generated from simulation data, and the photopeak and scatter window were extracted from GATE output using ROOT to create DICOM files to use in the clinical reconstruction. Results: Simulated spatial resolutions for LEHR 3/8” crystal at 0, 10 cm, 10 cm (with scatter), and 30 cm were 4, 6.7, 7.9, and 14.5 mm FWHM; these were 9% less than published data. For 5/8” crystal the spatial resolutions were 4.5, 7.0, 8.5, and 14.7 mm FWHM; these were 4% to 10% less than published data. Simulated sensitivity was within 3.5% of published data for both LEHR 3/8” and 5/8”. The simulated energy spectra matched the photopeak and scatter window well, but did overestimate the counts below 90 keV. The simulated attenuation map and projection data were successfully reconstructed with the clinical software, and the passed visual inspection. Conclusions: Validation of a specific clinical scanner allows future studies of quantification accuracy for both planar and SPECT imaging. Research

POCT PT INR - Is it adequate for patient care? A comparison of the Roche Coaguchek XS vs. Stago Star vs. Siemens BCS in patients routinely seen in an anticoagulation clinic.

Science.gov (United States)

Baker, Wendy S; Albright, Kathleen J; Berman, Megan; Spratt, Heidi; Mann, Peggy A; Unabia, Jaime; Petersen, John R

2017-09-01

In this study we examined the difference in patient INR values as measured by the POCT CoaguChek XS device and central laboratory Stago Evolution and Siemens BCS XP analyzers. This study composed of 100 warfarin therapy patients and 20 coagulation normal subjects, showed that the difference between the POCT and clinical laboratory values increased with increasing INR and was exacerbated by the use of different thromboplastin reagents by the POCT and central lab. The CoaguChek XS and on-site Stago analyzers which used human recombinant (ISI=1.01) and rabbit brain thromboplastin (ISI=1.25), respectively, showed reasonable agreement for INR5.0 with the Stago Evolution prevented adverse treatment events for the warfarin therapy patients in the six months preceding and following this investigation. Copyright © 2017 Elsevier B.V. All rights reserved.

Detection of tibial condylar fractures using 3D imaging with a mobile image amplifier (Siemens ISO-C-3D): Comparison with plain films and spiral CT

International Nuclear Information System (INIS)

Kotsianos, D.; Rock, C.; Wirth, S.; Linsenmaier, U.; Brandl, R.; Fischer, T.; Pfeifer, K.J.; Reiser, M.; Euler, E.; Mutschler, W.

2002-01-01

Purpose: To analyze a prototype mobile C-arm 3D image amplifier in the detection and classification of experimental tibial condylar fractures with multiplanar reconstructions (MPR). Method: Human knee specimens (n=22) with tibial condylar fractures were examined with a prototype C-arm (ISO-C-3D, Siemens AG), plain films (CR) and spiral CT (CT). The motorized C-arm provides fluoroscopic images during a 190 orbital rotation computing a 119 mm data cube. From these 3D data sets MP reconstructions were obtained. All images were evaluated by four independent readers for the detection and assessment of fracture lines. All fractures were classified according to the Mueller AO classification. To confirm the results, the specimens were finally surgically dissected. Results: 97% of the tibial condylar fractures were easily seen and correctly classified according to the Mueller AO classification on MP reconstruction of the ISO-C-3D. There is no significant difference between ISO-C and CT in detection and correct classification of fractures, but ISO-CD-3D is significant by better than CR. (orig.) [de

Performance measurement of PSF modeling reconstruction (True X) on Siemens Biograph TruePoint TrueV PET/CT.

Science.gov (United States)

Lee, Young Sub; Kim, Jin Su; Kim, Kyeong Min; Kang, Joo Hyun; Lim, Sang Moo; Kim, Hee-Joung

2014-05-01

The Siemens Biograph TruePoint TrueV (B-TPTV) positron emission tomography (PET) scanner performs 3D PET reconstruction using a system matrix with point spread function (PSF) modeling (called the True X reconstruction). PET resolution was dramatically improved with the True X method. In this study, we assessed the spatial resolution and image quality on a B-TPTV PET scanner. In addition, we assessed the feasibility of animal imaging with a B-TPTV PET and compared it with a microPET R4 scanner. Spatial resolution was measured at center and at 8 cm offset from the center in transverse plane with warm background activity. True X, ordered subset expectation maximization (OSEM) without PSF modeling, and filtered back-projection (FBP) reconstruction methods were used. Percent contrast (% contrast) and percent background variability (% BV) were assessed according to NEMA NU2-2007. The recovery coefficient (RC), non-uniformity, spill-over ratio (SOR), and PET imaging of the Micro Deluxe Phantom were assessed to compare image quality of B-TPTV PET with that of the microPET R4. When True X reconstruction was used, spatial resolution was RC with True X reconstruction was higher than that with the FBP method and the OSEM without PSF modeling method on the microPET R4. The non-uniformity with True X reconstruction was higher than that with FBP and OSEM without PSF modeling on microPET R4. SOR with True X reconstruction was better than that with FBP or OSEM without PSF modeling on the microPET R4. This study assessed the performance of the True X reconstruction. Spatial resolution with True X reconstruction was improved by 45 % and its % contrast was significantly improved compared to those with the conventional OSEM without PSF modeling reconstruction algorithm. The noise level was higher than that with the other reconstruction algorithm. Therefore, True X reconstruction should be used with caution when quantifying PET data.

Simultaneous Tc-99m/I-123 dual-radionuclide myocardial perfusion/innervation imaging using Siemens IQ-SPECT with SMARTZOOM collimator

International Nuclear Information System (INIS)

Du, Yong; Frey, Eric C; Bhattacharya, Manojeet

2014-01-01

Simultaneous dual-radionuclide myocardial perfusion/innervation SPECT imaging can provide important information about the mismatch between scar tissue and denervated regions. The Siemens IQ-SPECT system developed for cardiac imaging uses a multifocal SMARTZOOM collimator to achieve a four-fold sensitivity for the cardiac region, compared to a typical parallel-hole low-energy high-resolution collimator, but without the data truncation that can result with conventional converging-beam collimators. The increased sensitivity allows shorter image acquisition times or reduced patient dose, making IQ-SPECT ideal for simultaneous dual-radionuclide SPECT, where reduced administrated activity is desirable in order to reduce patient radiation exposure. However, crosstalk is a major factor affecting the image quality in dual-radionuclide imaging. In this work we developed a model-based method that can estimate and compensate for the crosstalk in IQ-SPECT data. The crosstalk model takes into account interactions in the object and collimator-detector system. Scatter in the object was modeled using the effective source scatter estimation technique (ESSE), previously developed to model scatter with parallel-hole collimators. The geometric collimator-detector response was analytically modeled in the IQ-SPECT projector. The estimated crosstalk was then compensated for in an iterative reconstruction process. The new method was validated with data from both Monte Carlo simulations and physical phantom experiments. The results showed that the estimated crosstalk was in good agreement with simulated and measured results. After model-based compensation the images from simultaneous dual-radionuclide acquisitions were similar in quality to those from single-radionuclide acquisitions that did not have crosstalk contamination. The proposed model-based method can be used to improve simultaneous dual-radionuclide images acquired using IQ-SPECT. This work also demonstrates that ESSE scatter

Performance characterization of siemens primus linear accelerator under small monitor unit and small segments for the implementation of step-and-shoot intensitymodulated radiotherapy

Directory of Open Access Journals (Sweden)

Reena P

2006-01-01

Full Text Available Implementation of step-and-shoot intensity-modulated radiotherapy (IMRT needs careful understanding of the accelerator start-up characteristic to ensure accurate and precise delivery of radiation dose to patient. The dosimetric characteristic of a Siemens Primus linear accelerator (LA which delivers 6 and 18 MV x-rays at the dose rate of 300 and 500 monitor unit (MU per minutes (min respectively was studied under the condition of small MU ranging from 1 to 100. Dose monitor linearity was studied at different dose calibration parameter (D1_C0 by measuring ionization at 10 cm depth in a solid water phantom using a 0.6 cc ionization chamber. Monitor unit stability was studied from different intensity modulated (IM groups comprising various combinations of MU per field and number of fields. Stability of beam flatness and symmetry was investigated under normal and IMRT mode for 20x20 cm2 field under small MU using a 2D Profiler kept isocentrically at 5 cm depth. Inter segment response was investigated form 1 to 10 MU by measuring the dose per MU from various IM groups, each consisting of four segments with inter-segment separation of 2 cm. In the range 1-4 MU, the dose linearity error was more than 5% (max -32% at 1 MU for 6 MV x-rays at factory calibrated D1_C0 value of 6000. The dose linearity error was reduced to -10.95% at 1 MU, within -3% for 2 and 3 MU and ±1% for MU ≥4 when the D1_C0 was subsequently tuned at 4500. For 18 MV x-rays, the dose linearity error at factory calibrated D1_C0 value of 4400 was within ±1% for MU ≥ 3 with maximum of -13.5 observed at 1 MU. For both the beam energies and MU/field ≥ 4, the stability of monitor unit tested for different IM groups was within ±1% of the dose from the normal treatment field. This variation increases to -2.6% for 6 MV and -2.7% for 18 MV x-rays for 2 MU/field. No significant variation was observed in the stability of beam profile measured from normal and IMRT mode. The beam flatness

New preamplifier for particle detectors

International Nuclear Information System (INIS)

Yarema, R.J.

1984-11-01

A new preamplifier for particle detectors has been designed and built for the Fermilab VTPC by Fujitsu of Japan. The device, designated MB43458, is a semi-custom monolithic assembled in a small, low mass package. The purpose of this report is to document the preliminary tests which have been done thus far. Tests are continuing to expand upon the results presented herein

Quantum Effect Physics, Electronics and Applications: Proceedings of the International Workshop Held in Luxor, Egypt on January 6-10, 1992

Science.gov (United States)

1992-12-15

Giza Engineering Systems, Fujitsu, Hitachi, Matsushita, Mitsubishi, NEC, BTT, Sanyo, Sony. and Toshiba. K lsmail T Ikoma H I Smith Organizing and...etch and the i"• development of low etch rate surfaces were used for the fabrication of pyramid - shaped ridges with the QWs forming buried layers...inside the pyramids . "a/s Depending on the etch-depth, the wire /\

Artificial Intelligence/Robotics Applications to Navy Aircraft Maintenance.

Science.gov (United States)

1984-06-01

Northrup, Martin-Marietta, Rand, Perceptronics, PAR, Unilever , and » Philips. Japanese companies include Hitachi, Kawasaki, Fujitsu, NTT, NEC...in which computer systems have been configured. Another commercial development has also attracted attention. The General Electric Company is...increases the contrast to make dark objects in the scene stand out against a light background (or vice versa). Finally, it applies various simple and

Quantification and reduction of peripheral dose from leakage radiation on Siemens Primus accelerators in electron therapy mode.

Science.gov (United States)

Yeboah, Collins; Karotki, Alex; Hunt, Dylan; Holly, Rick

2010-06-15

In this work, leakage radiation from EA200 series electron applicators on Siemens Primus accelerators is quantified, and its penetration ability in water and/or the shielding material Xenolite-NL established. Initially, measurement of leakage from 10 x 10 - 25 x 25 cm2 applicators was performed as a function of height along applicator and of lateral distance from applicator body. Relative to central-axis ionization maximum in solid water, the maximum leakage in air observed with a cylindrical ion chamber with 1 cm solid water buildup cap at a lateral distance of 2 cm from the front and right sidewalls of applicators were 17% and 14%, respectively; these maxima were recorded for 18 MeV electron beams and applicator sizes of >or=20 x 20 cm2. In the patient plane, the applicator leakage gave rise to a broad peripheral dose off-axis distance peak that shifted closer to the field edge as the electron energy increases. The maximum peripheral dose from normally incident primary electron beams at a depth of 1 cm in a water phantom was observed to be equal to 5% of the central-axis dose maximum and as high as 9% for obliquely incident beams with angles of obliquity dose curves showed that the "practical range" of the leakage electrons in water varies from approximately 1.4 to 5.7 cm as the primary electron beam energy is raised from 6 to 18 MeV. Next, transmission measurements of leakage radiation through the shielding material Xenolite-NL showed a 4 mm thick sheet of this material is required to attenuate the leakage from 9 MeV beams by two-thirds, and that for every additional 3 MeV increase in the primary electron beam energy, an additional Xenolite-NL thickness of roughly 2 mm is needed to achieve the aforementioned attenuation level. Finally, attachment of a 1 mm thick sheet of lead to the outer surface of applicator sidewalls resulted in a reduction of the peripheral dose by up to 80% and 74% for 9 and 18MeV beams, respectively. This sidewall modification had an

Comprehensive approach to energy and environment in the Eco Care Program for design, engineering and operation of Siemens Industry Solutions

Energy Technology Data Exchange (ETDEWEB)

Wegener, D. (Siemens AG, Erlangen (Germany)); Finkbeiner, M. (Technische Univ. Berlin (TUB), Systemumwelttechnik (SUT), Berlin (Germany)); Geiger, D. (Siemens AG, Munich (Germany)); Olsen, S.I. (Danish Technical Univ. (DTU), Management Engineering, Lyngby (Denmark)); Walachowicz, F. (Siemens AG, Berlin (Germany))

2009-09-15

This paper intends to describe the outline of the Eco Care Program (ECP) at the Siemens-Division Industry Solutions and its implementation. ECP aims to embrace and to coordinate main activities within the product lifecycle management (PLM) process considering both economic targets in terms of overall lifecycle costs as well as energy efficiency and other important environmental issues in the innovation management for industrial solutions. ECP consists of adapted methods for assessing the environmental and financial impacts of industrial solutions (plants, processes, single technologies or even services) and tools which helps to derive reliable assessment results. Life Cycle Assessment (LCA) is a suitable method for assessing environmental impacts of products and solutions over their entire lifecycle focusing on those lifecycle phases which may contribute significantly to environmental burdens or benefits. To meet these requirements the main challenge is to simplify the assessment methodology as far as reliability and accuracy of results is preserved. To present results in both dimensions of economical performance and environmental impact the paper introduces the concept of the 'eco care matrix' (ECM). Environmental sound industrial solutions have advantages in both 'eco' dimensions (eco-nomical + eco-logical). The analytical approach presented is further on implemented in two complementary and independent industrial application fields: in order to exemplify usability of the approach in quite complex process technology different hot metal producing technologies (blast furnace route vs. smelting reduction routes COREX / FINEX). The second pilot application is targeted on the assessment of infrastructure solutions especially focusing on the comparison of environmental and financial effects of different technologies and payment schemes of electronic city tolling systems for London and Copenhagen. Experienced results derived from these two pilot

Performance characterization of Siemens primus linear accelerator under small monitor unit and small segments for the implementation of step-and-shoot intensity-modulated radiotherapy

International Nuclear Information System (INIS)

Reena, P.; Pai, Rajeshri; Gupta, Tejpal; Rajeev, S.; Dayananda, S.; Jamema, S.V.; Deepak, D.

2006-01-01

Implementation of step-and-shoot intensity-modulated radiotherapy (IMRT) needs careful understanding of the accelerator start-up characteristic to ensure accurate and precise delivery of radiation dose to patient. The dosimetric characteristic of a Siemens Primus linear accelerator (LA) which delivers 6 and 18 MV x-rays at the dose rate of 300 and 500 monitor unit (MU) per minutes (min) respectively was studied under the condition of small MU ranging from 1 to 100. Dose monitor linearity was studied at different dose calibration parameter (D1 C O) by measuring ionization at 10 cm depth in a solid water phantom using a 0.6 cc ionization chamber. Monitor unit stability was studied from different intensity modulated (IM) groups comprising various combinations of MU per field and number of fields. Stability of beam flatness and symmetry was investigated under normal and IMRT mode for 20x20 cm 2 field under small MU using a 2D Profiler kept isocentrically at 5 cm depth. Inter segment response was investigated form 1 to 10 MU by measuring the dose per MU from various IM groups, each consisting of four segments with inter-segment separation of 2 cm. In the range 1-4 MU, the dose linearity error was more than 5% (max -32% at 1 MU) for 6 MV x-rays at factory calibrated D1 C O value of 6000. The dose linearity error was reduced to -10.95% at 1 MU, within -3% for 2 and 3 MU and ± 1% for MU ≥4 when the D1 C O was subsequently tuned at 4500. For 18 MV x-rays, the dose linearity error at factory calibrated D1 C O value of 4400 was within ± 1% for MU ≥3 with maximum of -13.5 observed at 1 MU. For both the beam energies and MU/field ≥4, the stability of monitor unit tested for different IM groups was within ± 1% of the dose from the normal treatment field. This variation increases to -2.6% for 6 MV and -2.7% for 18 MV x-rays for 2 MU/field. No significant variation was observed in the stability of beam profile measured from normal and IMRT mode. The beam flatness was

Electro-Optics Millimeter/Microwave Technology in Japan. Report of DoD Technology Team.

Science.gov (United States)

1985-05-01

sink packages covering frequencies up to 94 GHz is being produced. They are suitable for both con- tinuous wave (CW) and pulsed operations. Mean -time...Processing Tel ecommunications Semiconductor and Electronic Components The Technology Team visited the Fujitsu Laboratory, Kanagawa. Topics covered included...Japan, the representatives of the Government of Japan and the Government of the United States of America have held discussions on the ways and means to

JPRS Report, Science & Technology, Japan, 89 Sairas Symposium

Science.gov (United States)

1990-08-21

Electric) B2-5 Region Segmentation Process for Visual Data Mikio Fukase, Tsugito Maruyama, Takashi Uchiyama (Fujitsu Labs.) Osamu Okamoto, Isao Yamaguchi (N...Shigeoki Hirai, Tomomasa Sato (ETL) Tadao Hiruma (Meiji Univ.) B2-12 A Teleoperating Assembly System Hajime Morikawa, Nobuaki Takanashi, Norio Tagawa...Processing for Space Robot Teleoperation 230 Eiichi Ogawa, Shigeki Kuzuoka (Mitsubrshi Electric) B32-5 Region Segmentation Process for Visual Data 234 Mikio

Performance evaluation of siemens CTI ECAT EXACT 47 scanner using NEMA NU2-2001

International Nuclear Information System (INIS)

Kim, Jin Su; Lee, Jae Sung; Lee, Dong Soo; Chung, June Key; Lee, Myung Chul

2004-01-01

NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. In this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: 250 ∼ 650 keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post-processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by 1∼5 aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity were estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates were measured for 7 half-lives to obtain noise equivalent count rate (NECR) and scatter fraction. We confirmed that dead time loss of the last frame were below 1%. Scatter fraction was estimated by averaging the true to background (scatter + random) ratios of last 3 frames in which the fractions of random rate are negligibly small. Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D

Computational Tools and Resources for Metabolism-Related Property Predictions. 1. Overview of Publicly Available (Free and Commercial) Databases and Software

Science.gov (United States)

2012-01-01

inhibitors, kinetics, UGT substrates, clearance QSAR models [211] ADMEworks Predictor Fujitsu Commercial CYP-binding affinities QSAR models [253] CypScore...fragment energies pre- calculated using density functional theory . The second descriptor is a measure of how far each site is from the center of the...semiempirical molecular orbital theory . ChemMedChem 4(4), 657–669 (2009). 44 Rydberg P, Gloriam DE, Zaretzki J, Breneman C, Olsen L. SMARTCyp: A 2D method for

Translations on Telecommunications Policy, Research and Development, Number 28

Science.gov (United States)

1978-02-09

digital electronics technology — is confident that the 12-watt I’KP (Peak En- velope Tower) single side band radio will perform better and be...PRODUCED WITH FUJITSU TECHNOLOGY, EQUIPMENT Rio de Janeiro 0 GLOBO in Portuguese 21 Dec 77 p 21 [Text] Porto Alegre (0 GLOBO). EDISA [ Digital ...10042 CSO: 5500 25 PERU TELEPHONE SERVICE TO UNDERGO COSTLY EXPANSION Plan To Add Lines Approved Lima EL COMERCIO in Spanish 1? Nov 77 Front

Designing of a technological line in the context of controlling with the use of integration of the virtual controller with the mechatronics concept designer module of the PLM Siemens NX software

Science.gov (United States)

Herbuś, K.; Ociepka, P.

2017-08-01

In the work is examined the sequential control system of a technological line in the form of the final part of a system of an internal transport. The process of designing this technological line using the computer-aided approach ran concurrently in two different program environments. In the Mechatronics Concept Designer module of the PLM Siemens NX software was developed the 3D model of the technological line prepared for verification the logic interrelations implemented in the control system. For this purpose, from the whole system of the technological line, it was distinguished the sub-system of actuators and sensors, because their correct operation determines the correct operation of the whole system. Whereas in the application of the virtual controller have been implemented the algorithms of work of the planned line. Then both program environments have been integrated using the OPC server, which enables the exchange of data between the considered systems. The data on the state of the object and the data defining the way and sequence of operation of the technological line are exchanged between the virtual controller and the 3D model of the technological line in real time.

Vectorization, parallelization and implementation of Quantum molecular dynamics codes (QQQF, MONTEV)

Energy Technology Data Exchange (ETDEWEB)

Kato, Kaori [High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan); Kunugi, Tomoaki; Kotake, Susumu; Shibahara, Masahiko

1998-03-01

This report describes parallelization, vectorization and implementation for two simulation codes, Quantum molecular dynamics simulation code QQQF and Photon montecalro molecular dynamics simulation code MONTEV, that have been developed for the analysis of the thermalization of photon energies in the molecule or materials. QQQF has been vectorized and parallelized on Fujitsu VPP and has been implemented from VPP to Intel Paragon XP/S and parallelized. MONTEV has been implemented from VPP to Paragon and parallelized. (author)

Korean Affairs Report

Science.gov (United States)

1986-09-09

U.S. Volvo 13. Other 14. Subtotal 15. Toyota 16. Nissan 17. Honda 18. Mazda 19. Mitsubishi 20. Fujitsu 21. Isuzu 22. Suzuki 23. Japanese...cars & Percent Unit=1,000 3. Company 4. U.S.-Made Cars 5. Imported Cars 6. GM 7. Ford 8. Chrysler 9. AMC 10. U.S. Nissan 11. U.S. Honda 12...24 percent. This is a surprisingly large increase compared with the current 1.7 percent. Until 1983, the prospect of Korean automobile exports was

A Portable Parallel Implementation of the U.S. Navy Layered Ocean Model

Science.gov (United States)

1995-01-01

Wallcraft, PhD (I.C. 1981) Planning Systems Inc. & P. R. Moore, PhD (Camb. 1971) IC Dept. Math. DR Moore 1° Encontro de Metodos Numericos...Kendall Square, Hypercube, D R Moore 1 ° Encontro de Metodos Numericos para Equacöes de Derivadas Parciais A. J. Wallcraft IC Mathematics...chips: Chips Machine DEC Alpha CrayT3D/E SUN Sparc Fujitsu AP1000 Intel 860 Paragon D R Moore 1° Encontro de Metodos Numericos para Equacöes

Solid Oxide Fuel Cells Operating on Alternative and Renewable Fuels

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaoxing; Quan, Wenying; Xiao, Jing; Peduzzi, Emanuela; Fujii, Mamoru; Sun, Funxia; Shalaby, Cigdem; Li, Yan; Xie, Chao; Ma, Xiaoliang; Johnson, David; Lee, Jeong; Fedkin, Mark; LaBarbera, Mark; Das, Debanjan; Thompson, David; Lvov, Serguei; Song, Chunshan

2014-09-30

This DOE project at the Pennsylvania State University (Penn State) initially involved Siemens Energy, Inc. to (1) develop new fuel processing approaches for using selected alternative and renewable fuels – anaerobic digester gas (ADG) and commercial diesel fuel (with 15 ppm sulfur) – in solid oxide fuel cell (SOFC) power generation systems; and (2) conduct integrated fuel processor – SOFC system tests to evaluate the performance of the fuel processors and overall systems. Siemens Energy Inc. was to provide SOFC system to Penn State for testing. The Siemens work was carried out at Siemens Energy Inc. in Pittsburgh, PA. The unexpected restructuring in Siemens organization, however, led to the elimination of the Siemens Stationary Fuel Cell Division within the company. Unfortunately, this led to the Siemens subcontract with Penn State ending on September 23rd, 2010. SOFC system was never delivered to Penn State. With the assistance of NETL project manager, the Penn State team has since developed a collaborative research with Delphi as the new subcontractor and this work involved the testing of a stack of planar solid oxide fuel cells from Delphi.

Analyses of European BWRs with CASMO-3 and MICROBURN-B

International Nuclear Information System (INIS)

Spierling, H.; Misu, S.; Grummer, R.G.

1996-01-01

For many years, Siemens Power Generation KWU has been using the BPSA (based on TGBLA) and RS3D (based on PANACEA) codes for neutronics fuel assembly design and steady-state boiling water reactor (BWR) core analysis, respectively. With increasing convergence of development and design activities at Siemens Power Corporation, Nuclear Division (SPC-ND) and Siemens KWU in the nuclear fuel area, there was a rising incentive to implement at Siemens KWU the CASMO-3 code, which had previously been implemented by SPC-ND, and the MICROBURN-B code which was developed by SPC-ND. This paper deals with the experience gained by Siemens KWU in applying CASMO-3/MICROBURN-B in European reload projects in an environment of ambitious in-core fuel management requirements

Lightweight methodology to improve web accessibility

CSIR Research Space (South Africa)

Greeff, M

2009-10-01

Full Text Available to improve score. Colour Contrast Fujitsu ColorSelector [9] Each colour combination has to be selected manually. Didn’t identify colour contrast problems that were highlighted by the other two tools. JuicyStudio Colour Contrast Analyser Firefox..., but this is not tested by AccessKeys AccessColor. However, AccessKeys AccessColor provides a link to the specific line in the code where the problem occurs. This is not provided by JuicyStudio Colour Contrast Analyser. According to these two tools, many colour...

Parallelization for first principles electronic state calculation program

International Nuclear Information System (INIS)

Watanabe, Hiroshi; Oguchi, Tamio.

1997-03-01

In this report we study the parallelization for First principles electronic state calculation program. The target machines are NEC SX-4 for shared memory type parallelization and FUJITSU VPP300 for distributed memory type parallelization. The features of each parallel machine are surveyed, and the parallelization methods suitable for each are proposed. It is shown that 1.60 times acceleration is achieved with 2 CPU parallelization by SX-4 and 4.97 times acceleration is achieved with 12 PE parallelization by VPP 300. (author)

Total-system expertise in economically efficient operation of nuclear power plants

International Nuclear Information System (INIS)

2000-01-01

Siemens Nuclear Power GmbH can look back on well over 40 years of experience in developing and constructing nuclear power plants. 23 Power plant units of Siemens design are in operation in five countries, and in autumn this year, another one will start commercial operation, while yet another one is under construction. In comparative international power plant surveys, the Siemens-design systems usually rank in top positions when it comes to comparing systems availability and electric power generation, and Siemens have build a reputation in manufacturing power plants up to the highest safety standards worldwide. Our experience as a manufacturer of turnkey PWR and BWR type reactors, as well as our profound knowledge of international nuclear standardisation, engineering codes and safety guides, has been used and processed to the benefit of the services offered by Siemens, resulting in well-devised service packages, and enhancements and optimisation of our machinery and equipment. Siemens has of course obtained the relevant licenses and certification for all its services and products according to DIN ISO 9001, KTA and ASME standards [de

Truth and falsity of patent

International Nuclear Information System (INIS)

Park, Gum Jin

2006-10-01

This book describes the process of the effect to build the business of patent strongly in difficult situation. The titles of this contents are finally, lawsuit if formed, the task of patent application introduction of tasks of patent negotiation, negotiation with Fujitsu, Mitsubishi, Oki and NEC, amalgamation between LG semiconductor and Hyundai Electronic Industry, life in incorporated company, current condition of application for a patent, the method to process strategy patent, how to make strong patent and effective negotiation strategy for a patent and strategy of patent application.

Practical manual for technology transfer strategy

International Nuclear Information System (INIS)

Heo, Jae Gwan

2004-03-01

This book deals with technical transfer strategy in the 21 century, management period of intellectual property, which includes value of invisible and intangible assets, core topic of management of intellectual property construction of virtuous cycle of intellectual and creative activity, and phase and building strategy of intellectual property management system. It also mentions building of useful patent portfolio and strategy with patent problems in business management strategy, case of patent management strategy of IBM in the Uited Sates and Fujitsu in Japan, and profit process using intellectual property outside of the company.

Verification Tools Secure Online Shopping, Banking

Science.gov (United States)

2010-01-01

Just like rover or rocket technology sent into space, the software that controls these technologies must be extensively tested to ensure reliability and effectiveness. Ames Research Center invented the open-source Java Pathfinder (JPF) toolset for the deep testing of Java-based programs. Fujitsu Labs of America Inc., based in Sunnyvale, California, improved the capabilities of the JPF Symbolic Pathfinder tool, establishing the tool as a means of thoroughly testing the functionality and security of Web-based Java applications such as those used for Internet shopping and banking.

Leadership in building automation aspired; Fuehrungsrolle in der Gebaeudeautomation angestrebt

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-04-01

Siemens Building Technologies AG (SBT) aspires to global leadership in building automation and control. Building Automation, one of the six Divisions of Siemens Building Technologies, plans to increasingly offer concepts with comprehensive support for specific customer groups via its more than 500 branch offices worldwide. The basis for future building management systems is the new Desigo system, which includes not only integrated overall systems but also web-based services. The new building automation and control system is the culmination of the integration process for the systems of Landis and Gyr, Staefa Control System and Siemens GTA. (orig.) [German] Building Automation, eine der sechs Divisionen der Siemens Building Technologies AG, wird auf der bevorstehenden internationalen 'Light+Building 2002' das neue Gebaeudeautomationssystem Desigo praesentieren. Aus der Zusammenfuehrung der Gebaeudeautomationssysteme von Landis and Gyr, Staefa Control System und Siemens GTA ist dieses neue System entstanden, das auf internationalen Standards aufbaut. (orig.)

SYNDROME DE ChRIST-SIEMENS-TOURAINE

African Journals Online (AJOL)

Cependant le mode de transmission lié à l'X domi- nant ou récessif est le plus souvent décrit. La mutation au niveau du EDA gêne dont le locus est l'Xq12-13 entraîne ce type de syndrome. (3). Dans la forme récessive liée à l'X, la plus commune, les hommes sont atteints, mais les femmes porteuses hété- rozygotes ont une ...

Vectorization of phase space Monte Carlo code in FACOM vector processor VP-200

International Nuclear Information System (INIS)

Miura, Kenichi

1986-01-01

This paper describes the vectorization techniques for Monte Carlo codes in Fujitsu's Vector Processor System. The phase space Monte Carlo code FOWL is selected as a benchmark, and scalar and vector performances are compared. The vectorized kernel Monte Carlo routine which contains heavily nested IF tests runs up to 7.9 times faster in vector mode than in scalar mode. The overall performance improvement of the vectorized FOWL code over the original scalar code reaches 3.3. The results of this study strongly indicate that supercomputer can be a powerful tool for Monte Carlo simulations in high energy physics. (Auth.)

ID-1 mass storage system for mainframe by using FDDI network

International Nuclear Information System (INIS)

Morita, Y.; Fujii, H.; Inoue, E.; Kodama, H. Manabe, A.; Miyamoto, A.; Nomachi, M.; Watase, Y.; Yasu, Y.

1994-01-01

The authors have developed an ID-1 mass storage system as a distributed data server for Fujitsu mainframe computers. The system consists of a SONY ID-1 recorder DIR-1000, a tape robot system DMS-24 and a SCSI-II interface DFC-1500, which are connected to Spar Station 10 with an FDDI interface. The maximum speed of 7.5 Mbytes/sec is achieved for data transfer between Sparc Station 10 memory and DIR-1000 with a buffer size of 1 Mbytes. The system has been used successfully since last October to migrate more than 1 Tbytes data

A case for Redundant Arrays of Inexpensive Disks (RAID)

Science.gov (United States)

Patterson, David A.; Gibson, Garth; Katz, Randy H.

1988-01-01

Increasing performance of CPUs and memories will be squandered if not matched by a similar performance increase in I/O. While the capacity of Single Large Expensive Disks (SLED) has grown rapidly, the performance improvement of SLED has been modest. Redundant Arrays of Inexpensive Disks (RAID), based on the magnetic disk technology developed for personal computers, offers an attractive alternative to SLED, promising improvements of an order of magnitude in performance, reliability, power consumption, and scalability. This paper introduces five levels of RAIDs, giving their relative cost/performance, and compares RAID to an IBM 3380 and a Fujitsu Super Eagle.

IONOTHERMAL SYNTHESIS, STRUCTURES AND SUPRAMOLE

African Journals Online (AJOL)

Preferred Customer

nonflammability, high ionic conductivity, high heat capacity, high thermal ... Data collections of compounds 1 and 2 were performed on Rigaku Mercury ..... Siemens, SHELXTLTM Version 5 Reference Manual, Siemens Engergy & Automation ...

Sladkaja voennaja taina / Senta Alas

Index Scriptorium Estoniae

Alas, Senta

2006-01-01

NATO Norra kõrgeid ametnikke ja Saksa elektroonikakontserni Siemens puudutavast korruptsiooniskandaalist: Siemens Business Service maksis Norra kõrgematele sõjaväelastele 22 miljonit norra krooni, et kindlustada firmale soodsad tellimused

76 FR 45295 - In the Matter of Certain Static Random Access Memories and Products Containing Same; Notice of...

Science.gov (United States)

2011-07-28

... Electronics, Inc., 50 Marcus Drive, Melville, NY 11747. Nu Horizons Electronics Corp., 70 Maxess Road... 85034. Nokia Siemens Networks US, LLC, 6000 Connection Drive, Irving, TX 75039. Nokia Siemens Networks B...

Comparison of five automated hematology analyzers in a university hospital setting: Abbott Cell-Dyn Sapphire, Beckman Coulter DxH 800, Siemens Advia 2120i, Sysmex XE-5000, and Sysmex XN-2000.

Science.gov (United States)

Bruegel, Mathias; Nagel, Dorothea; Funk, Manuela; Fuhrmann, Petra; Zander, Johannes; Teupser, Daniel

2015-06-01

Various types of automated hematology analyzers are used in clinical laboratories. Here, we performed a side-by-side comparison of five current top of the range routine hematology analyzers in the setting of a university hospital central laboratory. Complete blood counts (CBC), differentials, reticulocyte and nucleated red blood cell (NRBC) counts of 349 patient samples, randomly taken out of routine diagnostics, were analyzed with Cell-Dyn Sapphire (Abbott), DxH 800 (Beckman Coulter), Advia 2120i (Siemens), XE-5000 and XN-2000 (Sysmex). Inter-instrument comparison of CBCs including reticulocyte and NRBC counts and investigation of flagging quality in relation to microscopy were performed with the complete set of samples. Inter-instrument comparison of five-part differential was performed using samples without atypical cells in blood smear (n=292). Automated five-part differentials and NRBCs were additionally compared with microscopy. The five analyzers showed a good concordance for basic blood count parameters. Correlations between instruments were less well for reticulocyte counts, NRBCs, and differentials. The poorest concordance for NRBCs with microscopy was observed for Advia 2120i (Kendall's τb=0.37). The highest flagging sensitivity for blasts was observed for XN-2000 (97% compared to 65%-76% for other analyzers), whereas overall specificity was comparable between different instruments. To the best of our knowledge, this is the most comprehensive side-by-side comparison of five current top of the range routine hematology analyzers. Variable analyzer quality and parameter specific limitations must be considered in defining laboratory algorithms in clinical practice.

Atrium and HTP fuel elements for the U.S. market

International Nuclear Information System (INIS)

Morgan, J.N.; Krebs, W.D.

1994-01-01

The international acitivities of Siemens in the nuclear fuel sector are the responsibility of the Nuclear Fuel Cycle Unit of the Power Generation Division (KWU) in Germany, the Nuclear Dividion of Siemens Power Corporation (SPC) in the Unites States, and the German Siemens subsidiaries, ANF GmbH (fuel element fabrication) in Lingen and NRG - Nuklearrohr Gesellschaft mbH (cladding tube production) in Duisburg. The requirements of the U.S. market for light water reactor fuel elements are met by products from the European market. (orig.) [de

CLSI-based transference of the CALIPER database of pediatric reference intervals from Abbott to Beckman, Ortho, Roche and Siemens Clinical Chemistry Assays: direct validation using reference samples from the CALIPER cohort.

Science.gov (United States)

Estey, Mathew P; Cohen, Ashley H; Colantonio, David A; Chan, Man Khun; Marvasti, Tina Binesh; Randell, Edward; Delvin, Edgard; Cousineau, Jocelyne; Grey, Vijaylaxmi; Greenway, Donald; Meng, Qing H; Jung, Benjamin; Bhuiyan, Jalaluddin; Seccombe, David; Adeli, Khosrow

2013-09-01

The CALIPER program recently established a comprehensive database of age- and sex-stratified pediatric reference intervals for 40 biochemical markers. However, this database was only directly applicable for Abbott ARCHITECT assays. We therefore sought to expand the scope of this database to biochemical assays from other major manufacturers, allowing for a much wider application of the CALIPER database. Based on CLSI C28-A3 and EP9-A2 guidelines, CALIPER reference intervals were transferred (using specific statistical criteria) to assays performed on four other commonly used clinical chemistry platforms including Beckman Coulter DxC800, Ortho Vitros 5600, Roche Cobas 6000, and Siemens Vista 1500. The resulting reference intervals were subjected to a thorough validation using 100 reference specimens (healthy community children and adolescents) from the CALIPER bio-bank, and all testing centers participated in an external quality assessment (EQA) evaluation. In general, the transferred pediatric reference intervals were similar to those established in our previous study. However, assay-specific differences in reference limits were observed for many analytes, and in some instances were considerable. The results of the EQA evaluation generally mimicked the similarities and differences in reference limits among the five manufacturers' assays. In addition, the majority of transferred reference intervals were validated through the analysis of CALIPER reference samples. This study greatly extends the utility of the CALIPER reference interval database which is now directly applicable for assays performed on five major analytical platforms in clinical use, and should permit the worldwide application of CALIPER pediatric reference intervals. Copyright © 2013 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

78 FR 17207 - Granting of Request for Early Termination of the Waiting Period Under the Premerger Notification...

Science.gov (United States)

2013-03-20

... Equity Partners Liquidating Trust. 20130523 G Parkland Fuel Corporation; AvenEx Energy Corp.; Parkland... Siemens Aktiengesellschaft; Invensys plc; Siemens Aktiengesellschaft. 20130565 G Integrys Energy Group... Reliance Steel & Aluminum Co.; Metals USA Holdings Corp.; Reliance Steel & Aluminum Co. 20130616 G Eastern...

Parallelization of quantum molecular dynamics simulation code

International Nuclear Information System (INIS)

Kato, Kaori; Kunugi, Tomoaki; Shibahara, Masahiko; Kotake, Susumu

1998-02-01

A quantum molecular dynamics simulation code has been developed for the analysis of the thermalization of photon energies in the molecule or materials in Kansai Research Establishment. The simulation code is parallelized for both Scalar massively parallel computer (Intel Paragon XP/S75) and Vector parallel computer (Fujitsu VPP300/12). Scalable speed-up has been obtained with a distribution to processor units by division of particle group in both parallel computers. As a result of distribution to processor units not only by particle group but also by the particles calculation that is constructed with fine calculations, highly parallelization performance is achieved in Intel Paragon XP/S75. (author)

A parallelization study of the general purpose Monte Carlo code MCNP4 on a distributed memory highly parallel computer

International Nuclear Information System (INIS)

Yamazaki, Takao; Fujisaki, Masahide; Okuda, Motoi; Takano, Makoto; Masukawa, Fumihiro; Naito, Yoshitaka

1993-01-01

The general purpose Monte Carlo code MCNP4 has been implemented on the Fujitsu AP1000 distributed memory highly parallel computer. Parallelization techniques developed and studied are reported. A shielding analysis function of the MCNP4 code is parallelized in this study. A technique to map a history to each processor dynamically and to map control process to a certain processor was applied. The efficiency of parallelized code is up to 80% for a typical practical problem with 512 processors. These results demonstrate the advantages of a highly parallel computer to the conventional computers in the field of shielding analysis by Monte Carlo method. (orig.)

A Controlled Trial of Topiramate Treatment for Alcohol Dependence in Veterans with PTSD

Science.gov (United States)

2014-10-01

regional brain metabolite levels related to the neuropathology of a disease. 1H MRS has been used to investigate the deregulation of the gluta- mate and γ...system with a Siemens Trio console (Siemens, Erlangen, Germany ) using an eight-channel transmit-receive head coil. Three-dimensional sagittal T1

Radiation doses in head CT examinations in Serbia: comparison among different CT units

International Nuclear Information System (INIS)

Arandjic, D.; Ciraj-Bjelac, O.; Bozovic, P.; Stankovic, J.; Hadnadjev, D.; Stojanovic, S.

2012-01-01

A rapid increase in number of Computed Tomography (CT) examinations has been observed world wide. As haed CT is the most frequent CT examination, the purpose of this study was to collect and analyse patient doses in children and adults in different CT units for this procedure. The study included 8 CT units from three manufacturers (Siemens, Toshiba and General Electric). Data for adults and pediatric patients were collected in terms of CTDIvol and DLP values. The doses were estimated as a mean value of 10 patients on each CT unit. For pediatrics, doses were collected for four age groups (0-1year, >1-5years, >5-10years and >10-15years). Comparing different manufacturers and the same number of detector rows it was observed that, in case of 16 slices units, doses were very similar on Siemens and General Electric scanner. CTDIvol and DLP on Siemens scanner were 60 mGy and 1066 mGy·cm, respectively, while on General Electric those values were 66 mGy and 1050 mGy·cm. However, this trend was not observed in case of 64 slices units. CTDIvol and DLP values collected on Toshiba were much higher (177 mGy and 2109 mGy·cm) than in case of Siemens scanner (59 mGy and 1060 mGy·cm). Doses on 16 and 64 slices Siemens scanners were very similar, while on 4 slices were higher. Except in two units, doses were were in line with DRLs. In case of pediatrics, doses increase with patient age and again Siemens scanner showed the lowest values while the highest were observed on Toshiba. (authors)

Nokia ja Sirmens panevad leivad ühte kappi / Lauri Matsulevitsh

Index Scriptorium Estoniae

Matsulevitsh, Lauri

2006-01-01

Nokia ja Siemens ühendavad võrguseadmete tootmise. Lisa: Annika Matson. Eesti võib võita uusi töökohti. Küsimustele vastab Avo Tihamäe. Diagramm: Ühinemisuudis pani aktsiad liikuma. Vt. samas: Sirje Rank. Analüütikud: Siemens võidab tehingust enam; Võrguseadmete tootjatel peal liitumistuhin

Parallelization of a numerical simulation code for isotropic turbulence

International Nuclear Information System (INIS)

Sato, Shigeru; Yokokawa, Mitsuo; Watanabe, Tadashi; Kaburaki, Hideo.

1996-03-01

A parallel pseudospectral code which solves the three-dimensional Navier-Stokes equation by direct numerical simulation is developed and execution time, parallelization efficiency, load balance and scalability are evaluated. A vector parallel supercomputer, Fujitsu VPP500 with up to 16 processors is used for this calculation for Fourier modes up to 256x256x256 using 16 processors. Good scalability for number of processors is achieved when number of Fourier mode is fixed. For small Fourier modes, calculation time of the program is proportional to NlogN which is ideal complexity of calculation for 3D-FFT on vector parallel processors. It is found that the calculation performance decreases as the increase of the Fourier modes. (author)

Survey on present status and trend of parallel programming environments

International Nuclear Information System (INIS)

Takemiya, Hiroshi; Higuchi, Kenji; Honma, Ichiro; Ohta, Hirofumi; Kawasaki, Takuji; Imamura, Toshiyuki; Koide, Hiroshi; Akimoto, Masayuki.

1997-03-01

This report intends to provide useful information on software tools for parallel programming through the survey on parallel programming environments of the following six parallel computers, Fujitsu VPP300/500, NEC SX-4, Hitachi SR2201, Cray T94, IBM SP, and Intel Paragon, all of which are installed at Japan Atomic Energy Research Institute (JAERI), moreover, the present status of R and D's on parallel softwares of parallel languages, compilers, debuggers, performance evaluation tools, and integrated tools is reported. This survey has been made as a part of our project of developing a basic software for parallel programming environment, which is designed on the concept of STA (Seamless Thinking Aid to programmers). (author)

Do carotid MR surface coils affect PET quantification in PET/MR imaging?

International Nuclear Information System (INIS)

Willemink, Martin J; Eldib, Mootaz; Leiner, Tim; Fayad, Zahi A; Mani, Venkatesh

2015-01-01

To evaluate the effect of surface coils for carotid MR imaging on PET quantification in a clinical simultaneous whole-body PET/MR scanner. A cylindrical phantom was filled with a homogeneous 2L water-FDG mixture at a starting dose of 301.2MBq. Clinical PET/MR and PET/CT systems were used to acquire PET-data without a coil (reference standard) and with two carotid MRI coils (Siemens Special Purpose 8-Channel and Machnet 4-Channel Phased Array). PET-signal attenuation was evaluated with Osirix using 51 (PET/MR) and 37 (PET/CT) circular ROIs. Mean and maximum standardized uptake values (SUVs) were quantified for each ROI. Furthermore, SUVs of PET/MR and PET/CT were compared. For validation, a patient was scanned with an injected dose of 407.7MBq on both a PET/CT and a PET/MR system without a coil and with both coils. PET/MR underestimations were -2.2% (Siemens) and -7.8% (Machnet) for SUVmean, and -1.2% (Siemens) and -3.3% (Machnet) for SUVmax, respectively. For PET/CT, underestimations were -1.3% (Siemens) and -1.4% (Machnet) for SUVmean and -0.5% (both Siemens and Machnet) for SUVmax, respectively using no coil data as reference. Except for PET/CT SUVmax values all differences were significant. SUVs differed significantly between PET/MR and PET/CT with SUVmean values of 0.51-0.55 for PET/MR and 0.68-0.69 for PET/CT, respectively. The patient examination showed that median SUVmean values measured in the carotid arteries decreased from 0.97 without a coil to 0.96 (Siemens) and 0.88 (Machnet). Carotid surface coils do affect attenuation correction in both PET/MR and PET/CT imaging. Furthermore, SUVs differed significantly between PET/MR and PET/CT.

Competitive strength by rearrangement of fuel element activities

International Nuclear Information System (INIS)

Pekarek, H.

1993-01-01

The fuel element activities of Siemens AG and Siemens Power Corporation (SPC) were merged, in particular by creation of a world-wide manufacturing network; establishment of priorities in research and development; intensified standardization of products and processes; continued quality improvement by TQM (Total Quality Management), and by fusion of European marketing systems. (orig./DG) [de

Case report: When measured free T4 and free T3 may be misleading. Interference with free thyroid hormones measurements on Roche® and Siemens® platforms

Directory of Open Access Journals (Sweden)

Lewandowski Krzysztof C

2012-10-01

Full Text Available Abstract A 59-year old female patient presented with apathy and 6 kg weight gain. Investigations revealed severe primary hypothyroidism (TSH>100 μIU/ml. L-thyroxine (L-T4 was started and titrated up to 75 μg, once daily, with clinical improvement. Other investigations revealed very high titres of anti-thyroid peroxidase (anti-TPO and anti-thyroglobulin (anti-Tg antibodies. After three months, there was a fall in TSH to 12.74 μIU/ml, however, with unexpectedly high free T4 (FT4 - 6.8 ng/ml and free T3 (FT3 - 6.7 pg/ml concentrations [reference range (rr: 0.8-1.9 ng/ml and 1.5-4.1 pg/ml (Siemens®, respectively]. At this stage L-T4 was stopped, and this was followed by a rapid increase in TSH (to 77.76 μIU/ml and some decrease in FT4 and FT3, however FT4 concentration remained elevated (2.1 ng/ml. Following this, L-T4 was restarted. On admission to our Department, she was clinically euthyroid on L-T4, 88 μg, once daily. Investigations on Roche® platform confirmed mildly elevated TSH - 5.14 (rr: 0.27-4.2 μIU/ml with high FT4 [4.59 (rr: 0.93-1.7 ng/ml] and FT3 [4.98 (rr: 2.6-4.4 pg/ml] concentrations. Other tests revealed hypoechogenic ultrasound pattern typical for Hashimoto thyroiditis. There was no discrepancy in calculated TSH value following TSH dilution (101% recovery. Concentrations of FT4 and FT3 were assessed on the day of discontinuation of L-T4 and after four days by the means of Abbott® Architect I 1000SR platform. These revealed FT4 and FT3 concentrations within the reference range [e.g., FT4 - 1.08 ng/ml (rr: 0.7-1.48] vs 4.59 ng/ml (rr: 0.93-1.7, Roche®, FT3 - 3.70 pg/ml (rr: 1.71-3.71 vs 4.98 (rr: 2.6-4.4, Roche®], confirming assay interference. Concentrations of ferritin and SHBG were normal. Conclusions Clinicians must be aware of possible assay interference, including the measurements of FT4 and FT3 in the differential diagnosis of abnormal results of thyroid function tests that do not fit the patient clinical

Rosatom, the Russian who wants to dethrone Areva

International Nuclear Information System (INIS)

Maincent, G.

2009-01-01

On March 3, 2009, Rosatom, the Russian atomic agency, signed an agreement with Siemens (Germany) for the creation of a common nuclear company. The objective is to become the World leader of the nuclear industry and to gain market shares on General Electric-Hitachi and Toshiba-Westinghouse. This is the spectacular consequence of the Siemens/Areva split from Areva NP, the reactor division of the Areva group. Rosatom gathers 89 civil nuclear companies inside the Atomenergoprom entity and is going to benefit from Siemens' know-how in the domains of instrumentation and control systems and reactors operation. Thanks to this alliance, the volume of Atomenergoprom's activities should grow up rapidly in particular in central and eastern Europe and more particularly in emerging countries. (J.S.)

Installation of a new Fortran compiler and effective programming method on the vector supercomputer

International Nuclear Information System (INIS)

Nemoto, Toshiyuki; Suzuki, Koichiro; Watanabe, Kenji; Machida, Masahiko; Osanai, Seiji; Isobe, Nobuo; Harada, Hiroo; Yokokawa, Mitsuo

1992-07-01

The Fortran compiler, version 10 has been replaced with the new one, version 12 (V12) on the Fujitsu Computer system at JAERI since May, 1992. The benchmark test for the performance of the V12 compiler is carried out with 16 representative nuclear codes in advance of the installation of the compiler. The performance of the compiler is achieved by the factor of 1.13 in average. The effect of the enhanced functions of the compiler and the compatibility to the nuclear codes are also examined. The assistant tool for vectorization TOP10EX is developed. In this report, the results of the evaluation of the V12 compiler and the usage of the tools for vectorization are presented. (author)

Status reports of supercomputing astrophysics in Japan

International Nuclear Information System (INIS)

Nakamura, Takashi; Nagasawa, Mikio

1990-01-01

The Workshop on Supercomputing Astrophysics was held at National Laboratory for High Energy Physics (KEK, Tsukuba) from August 31 to September 2, 1989. More than 40 participants of physicists, astronomers were attendant and discussed many topics in the informal atmosphere. The main purpose of this workshop was focused on the theoretical activities in computational astrophysics in Japan. It was also aimed to promote effective collaboration between the numerical experimentists working on supercomputing technique. The various subjects of the presented papers of hydrodynamics, plasma physics, gravitating systems, radiative transfer and general relativity are all stimulating. In fact, these numerical calculations become possible now in Japan owing to the power of Japanese supercomputer such as HITAC S820, Fujitsu VP400E and NEC SX-2. (J.P.N.)

Quality assurance and reliability in the Japanese electronics industry

Science.gov (United States)

Pecht, Michael; Boulton, William R.

1995-02-01

Quality and reliability are two attributes required for all Japanese products, although the JTEC panel found these attributes to be secondary to customer cost requirements. While our Japanese hosts gave presentations on the challenges of technology, cost, and miniaturization, quality and reliability were infrequently the focus of our discussions. Quality and reliability were assumed to be sufficient to meet customer needs. Fujitsu's slogan, 'quality built-in, with cost and performance as prime consideration,' illustrates this point. Sony's definition of a next-generation product is 'one that is going to be half the size and half the price at the same performance of the existing one'. Quality and reliability are so integral to Japan's electronics industry that they need no new emphasis.

Comparison of rod-ejection transient calculations in hexagonal-Z geometry

International Nuclear Information System (INIS)

Knight, M.P.; Brohan, P.; Finnemann, H.; Huesken, J.

1995-01-01

This paper proposes a set of 3-dimensional benchmark rod ejection problems for a VVER reactor, based on the well-known NEACRP PWR rod-ejection problems defined by Siemens/KWU. Predictions for these benchmarks derived using three hexagonal-z nodal transient codes, the PANTHER code of Nuclear Electric, the HEXTIME code of Siemens/KWU, and the DYN3D code of FZ-Rossendorf are presented and compared

Targeting Zero Emission Through Siemens Compressor Chiller Packages

Energy Technology Data Exchange (ETDEWEB)

Girbig, Paul

2010-09-15

Ecological as well as economic impacts necessities in District Cooling Technology. Reduction of total primary energy use. Reduction of greenhouse gas emission. Energy efficiency goals worldwide and in chiller equipment. A smart grid to get a reliable energy supply. Use of the sun leads to thermal power plants. Thermal storage technology to compensate differences in load and supply. The high energy demand of the district cooling plants, the variety of load demand, the methods employed in production of refrigeration and the highly sensitive production processes, depend on a reliable and efficient supply of technology.

Strategy to safety grade systems replacements

International Nuclear Information System (INIS)

Stimler, M.; Sullivan, K.E.; Trebincevic, I.

1993-01-01

The introduction of digital instrumentation and control systems in nuclear power plants is characterized by the need to satisfy the requirements of safety, reliability and man-machine ergonomics. Today digital instrumentation and control systems meet these requirements and the trend in Europe is towards full digital based nuclear power plant control systems. This paper describes Siemens (KWU) experience in nuclear power plants and development in trends within Europe. Topics which are the subject of major concern to NPP operators addressed in this paper are: human performance factors - man-machine interface; operating philosophy; safety, availability and reliability. Other aspects addressed are: Siemens open-quotes defense in depthclose quotes concept, description of Siemens digital I ampersand C systems, safety requirements and systems, I ampersand C qualification, control room ergonomics, information systems and retrofitting experience

PET/MRI for Oncologic Brain Imaging: A Comparison of Standard MR-Based Attenuation Corrections with a Model-Based Approach for the Siemens mMR PET/MR System.

Science.gov (United States)

Rausch, Ivo; Rischka, Lucas; Ladefoged, Claes N; Furtner, Julia; Fenchel, Matthias; Hahn, Andreas; Lanzenberger, Rupert; Mayerhoefer, Marius E; Traub-Weidinger, Tatjana; Beyer, Thomas

2017-09-01

The aim of this study was to compare attenuation-correction (AC) approaches for PET/MRI in clinical neurooncology. Methods: Forty-nine PET/MRI brain scans were included: brain tumor studies using 18 F-fluoro-ethyl-tyrosine ( 18 F-FET) ( n = 31) and 68 Ga-DOTANOC ( n = 7) and studies of healthy subjects using 18 F-FDG ( n = 11). For each subject, MR-based AC maps (MR-AC) were acquired using the standard DIXON- and ultrashort echo time (UTE)-based approaches. A third MR-AC was calculated using a model-based, postprocessing approach to account for bone attenuation values (BD, noncommercial prototype software by Siemens Healthcare). As a reference, AC maps were derived from patient-specific CT images (CTref). PET data were reconstructed using standard settings after AC with all 4 AC methods. We report changes in diagnosis for all brain tumor patients and the following relative differences values (RDs [%]), with regards to AC-CTref: for 18 F-FET (A)-SUVs as well as volumes of interest (VOIs) defined by a 70% threshold of all segmented lesions and lesion-to-background ratios; for 68 Ga-DOTANOC (B)-SUVs as well as VOIs defined by a 50% threshold for all lesions and the pituitary gland; and for 18 F-FDG (C)-RD of SUVs of the whole brain and 10 anatomic regions segmented on MR images. Results: For brain tumor imaging (A and B), the standard PET-based diagnosis was not affected by any of the 3 MR-AC methods. For A, the average RDs of SUV mean were -10%, -4%, and -3% and of the VOIs 1%, 2%, and 7% for DIXON, UTE, and BD, respectively. Lesion-to-background ratios for all MR-AC methods were similar to that of CTref. For B, average RDs of SUV mean were -11%, -11%, and -3% and of the VOIs 1%, -4%, and -3%, respectively. In the case of 18 F-FDG PET/MRI (C), RDs for the whole brain were -11%, -8%, and -5% for DIXON, UTE, and BD, respectively. Conclusion: The diagnostic reading of PET/MR patients with brain tumors did not change with the chosen AC method. Quantitative accuracy of

From Russian weapons grade plutonium to MOX fuel

International Nuclear Information System (INIS)

Braehler, G.; Kudriavtsev, E.G.; Seyve, C.

1997-01-01

The April 1996, G7 Moscow Summit on nuclear matters provided a political framework for one of the most current significant challenges: ensuring a consistent answer to the weapons grade fissile material disposition issue resulting from the disarmament effort engaged by both the USA and Russia. International technical assessments have showed that the transformation of Weapons grade Plutonium in MOX fuel is a very efficient, safe, non proliferant and economically effective solution. In this regard, COGEMA and SIEMENS, have set up a consistent technical program properly addressing incineration of weapons grade plutonium in MOX fuels. The leading point of this program would be the construction of a Weapons grade Plutonium dedicated MOX fabrication plant in Russia. Such a plant would be based on the COGEMA-SIEMENS industrial capabilities and experience. This facility would be operated by MINATOM which is the partner for COGEMA-SIEMENS. MINATOM is in charge of coordination of the activity of the Russian research and construction institutes. The project take in account international standards for non-proliferation, safety and waste management. France and Germany officials reasserted this position during their last bilateral summits held in Fribourg in February and in Dijon in June 1996. MINATOM and the whole Russian nuclear community have already expressed their interest to cooperate with COGEMA-SIEMENS in the MOX field. This follows governmental-level agreements signed in 1992 by French, German and Russian officials. For years, Russia has been dealing with research and development on MOX fabrication and utilization. So, the COGEMA-SIEMENS MOX proposal gives a realistic answer to the management of weapons grade plutonium with regard to the technical, industrial, cost and schedule factors. (author)

ASSESSMENT OF THE PCFBC-EXPOSED AND ACCELERATED LIFE-TESTED CANDLE FILTERS; TOPICAL

International Nuclear Information System (INIS)

M.A. Alvin

1999-01-01

Development of the hot gas filtration technology has been the focus of DOE/FETC and Siemens Westinghouse Power Corporation during the past twenty years. Systems development during this time has successfully lead to the generation and implementation of high temperature Siemens Westinghouse particulate filtration systems that are currently installed and are operational at Demonstration Plant sites, and which are ready for installation at commercial plant sites. Concurrently, materials development has advanced the use of commercially available oxide- and nonoxide-based monoliths, and has fostered the manufacture and use of second generation, oxide-based, continuous fiber reinforced ceramic composites and filament wound materials. This report summarizes the material characterization results for commercially available and second generation filter materials tested in Siemens Westinghouse's advanced, high temperature, particulate removal system at the Foster Wheeler, pressurized circulating fluidized-bed combustion, pilot-scale test facility in Karhula, Finland, and subsequent extended accelerated life testing of aged elements in Siemens Westinghouse pressurized fluidized-bed combustion simulator test facility in Pittsburgh, PA. The viability of operating candle filters successfully for over 1 year of service life has been shown in these efforts. Continued testing to demonstrate the feasibility of acquiring three years of service operation on aged filter elements is recommended

Annual report 1999. Energy and connectors; Rapport annuel 1999. Energie connectique

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

This report presents the industrial activities and the financial results of Framatome in 1999. Framatome's activities are divided into 2 sectors: energy and connectors, which represents respectively 54% and 46% of the turnover and 40% and 60% of the staff (26000 people). In 1999 the turnover reached 4.2 milliard euros. Framatome and Siemens have decided to merge their nuclear activities in a common company (66% for Framatome, 34% for Siemens). (A.C.)

Annual report 1999. Energy and connectors

International Nuclear Information System (INIS)

1999-01-01

This report presents the industrial activities and the financial results of Framatome in 1999. Framatome's activities are divided into 2 sectors: energy and connectors, which represents respectively 54% and 46% of the turnover and 40% and 60% of the staff (26000 people). In 1999 the turnover reached 4.2 milliard euros. Framatome and Siemens have decided to merge their nuclear activities in a common company (66% for Framatome, 34% for Siemens). (A.C.)

Annual report 1999. Energy and connectors; Rapport annuel 1999. Energie connectique

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

This report presents the industrial activities and the financial results of Framatome in 1999. Framatome's activities are divided into 2 sectors: energy and connectors, which represents respectively 54% and 46% of the turnover and 40% and 60% of the staff (26000 people). In 1999 the turnover reached 4.2 milliard euros. Framatome and Siemens have decided to merge their nuclear activities in a common company (66% for Framatome, 34% for Siemens). (A.C.)

77 FR 13104 - Decision and Order Amending a Waiver Granted to Fujitsu General America, Inc. From the Department...

Science.gov (United States)

2012-03-05

..., but will provide a more conservative estimate of the energy consumed by this equipment. The waiver... requirements provides a more conservative estimate of energy consumption because it results in a slightly lower... between two and eight indoor units. The indoor units must represent the highest sales model family, and...

Environmental radiation monitoring system in nuclear power station

International Nuclear Information System (INIS)

Matsuoka, Sadazumi; Tadachi, Katsuo; Endo, Mamoru; Yuya, Hiroshi

1983-01-01

At the time of the construction of nuclear power stations, prior to their start of operation, the state of environmental radiation must be grasped. After the start of the power stations, based on those data, the system of environmental radiation monitoring is established. Along with the construction of Kashiwazaki-Kariwa Nuclear Power Station, The Tokyo Electric Power Co., Inc. jointly with Fujitsu Ltd. has developed a high-reliability, environmental radiation monitoring system, and adopted ''optical data highways'' using optical fiber cables for communication. It consists of a central monitoring station and 11 telemeter observation points, for collecting both radiation and meteorological data. The data sent to the central station through the highways are then outputted on a monitoring panel. They are analyzed with a central processor, and the results are printed out. (Mori, K.)

Efficiency improvement of nuclear power plant operation: the significant role of advanced nuclear fuel technologies

International Nuclear Information System (INIS)

Van Velde, AA. de; Burtak, F.

2000-01-01

In this paper authors deals with nuclear fuel cycle and their economic aspects. At Siemens, the developments focusing on the reduction of fuel cycle costs are currently directed on .further batch average burnup increase, .improvement of fuel reliability, .enlargement of fuel operation margins, .improvement of methods for fuel design and core analysis. These items will be presented in detail in the full paper and illustrated by the global operating experience of Siemens fuel for both PWRs and BWRs. (authors)

The effect of helium on ventilator performance: study of five ventilators and a bedside Pitot tube spirometer.

Science.gov (United States)

Oppenheim-Eden, A; Cohen, Y; Weissman, C; Pizov, R

2001-08-01

To assess in vitro the performance of five mechanical ventilators-Siemens 300 and 900C (Siemens-Elma; Solna, Sweden), Puritan Bennett 7200 (Nellcor Puritan Bennett; Pleasanton, CA), Evita 4 (Dragerwerk; Lubeck, Germany), and Bear 1000 (Bear Medical Systems; Riverside CA)-and a bedside sidestream spirometer (Datex CS3 Respiratory Module; Datex-Ohmeda; Helsinki, Finland) during ventilation with helium-oxygen mixtures. In vitro study. ICUs of two university-affiliated hospitals. Each ventilator was connected to 100% helium through compressed air inlets and then tested at three to six different tidal volume (VT) settings using various helium-oxygen concentrations (fraction of inspired oxygen [FIO(2)] of 0.2 to 1.0). FIO(2) and VT were measured with the Datex CS3 spirometer, and VT was validated with a water-displacement spirometer. The Puritan Bennett 7200 ventilator did not function with helium. With the other four ventilators, delivered FIO(2) was lower than the set FIO(2). For the Siemens 300 and 900C ventilators, this difference could be explained by the lack of 21% oxygen when helium was connected to the air supply port, while for the other two ventilators, a nonlinear relation was found. The VT of the Siemens 300 ventilator was independent of helium concentration, while for the other three ventilators, delivered VT was greater than the set VT and was dependent on helium concentration. During ventilation with 80% helium and 20% oxygen, VT increased to 125% of set VT for the Siemens 900C ventilator, and more than doubled for the Evita 4 and Bear 1000 ventilators. Under the same conditions, the Datex CS3 spirometer underestimated the delivered VT by about 33%. At present, no mechanical ventilator is calibrated for use with helium. This investigation offers correction factors for four ventilators for ventilation with helium.

Design and implementation of a new fuzzy PID controller for networked control systems.

Science.gov (United States)

Fadaei, A; Salahshoor, K

2008-10-01

This paper presents a practical network platform to design and implement a networked-based cascade control system linking a Smar Foundation Fieldbus (FF) controller (DFI-302) and a Siemens programmable logic controller (PLC-S7-315-2DP) through Industrial Ethernet to a laboratory pilot plant. In the presented network configuration, the Smar OPC tag browser and Siemens WinCC OPC Channel provide the communicating interface between the two controllers. The paper investigates the performance of a PID controller implemented in two different possible configurations of FF function block (FB) and networked control system (NCS) via a remote Siemens PLC. In the FB control system implementation, the desired set-point is provided by the Siemens Human-Machine Interface (HMI) software (i.e, WinCC) via an Ethernet Modbus link. While, in the NCS implementation, the cascade loop is realized in remote Siemens PLC station and the final element set-point is sent to the Smar FF station via Ethernet bus. A new fuzzy PID control strategy is then proposed to improve the control performances of the networked-based control systems due to an induced transmission delay degradation effect. The proposed strategy utilizes an innovative idea based on sectionalizing the error signal of the step response into three different functional zones. The supporting philosophy behind these three functional zones is to decompose the desired control objectives in terms of rising time, settling time and steady-state error measures maintained by an appropriate PID-type controller in each zone. Then, fuzzy membership factors are defined to configure the control signal on the basis of the fuzzy weighted PID outputs of all three zones. The obtained results illustrate the effectiveness of the proposed fuzzy PID control scheme in improving the performances of the implemented NCS for different transportation delays.

One style to build them all: Corporate culture and innovation in the offshore wind industry

International Nuclear Information System (INIS)

Sovacool, Benjamin K.; Enevoldsen, Peter

2015-01-01

This study explores how Vestas and Siemens Wind Power manage technological innovation in the offshore wind power industry. It utilizes the concept of open and closed “research styles” to investigate how each company designs, constructs, and maintains offshore wind turbines. The article starts by summarizing three of the main innovation challenges facing the offshore wind sector—harsh conditions, capital intensity, and production bottlenecks—before it delves into the specific details about how Vestas and Siemens Wind Power approach turbine development. It divides this discussion into six distinct segments: resources and expenditures, stakeholder involvement and collaboration, testing and maintenance, control and knowledge management, adaptability of designs, and customization and marketing. The study finds that both Vestas and SWP, despite their corporate and cultural differences, utilize the same elements of closed and open styles. It lastly suggests that the notion of style itself may challenge certain assumptions held by scholars about managing the research and innovation process. - Highlights: • This study explores how Vestas and Siemens approach innovation in offshore wind turbine technology. • Open research styles are inclusive, participatory, cooperative, and flexible. • Closed research styles are exclusive, competitive, centralized, and rigid. • Interestingly, Vestas and Siemens use the same style to manage technological innovation. • They are closed when it comes to resources and expenditures and knowledge movement, but open in all other attributes.

Economic feeder for recharging and ``topping off''

Science.gov (United States)

Fickett, Bryan; Mihalik, G.

2000-04-01

Increasing the size of the melt charge significantly increases yield and reduces costs. Siemens Solar Industries is optimizing a method to charge additional material after meltdown (top-off) using an external feeder system. A prototype feeder system was fabricated consisting of a hopper and feed delivery system. The low-cost feeder is designed for simple operation and maintenance. The system is capable of introducing up to 60 kg of granular silicon while under vacuum. An isolation valve permits refilling of the hopper while maintaining vacuum in the growth furnace. Using the feeder system in conjunction with Siemens Solar Industries' energy efficient hot zone dramatically reduces power and argon consumption. Throughput is also improved as faster pull speeds can be attained. The increased pull speeds have an even greater impact when the charge size is increased. Further cost reduction can be achieved by refilling the crucible after crystal growth and pulling a second ingot run. Siemens Solar Industries is presently testing the feeder in production.

Computer programmes for the control and data manipulation of a sequential x-ray-fluorescence spectrometer

International Nuclear Information System (INIS)

Spimpolo, G.F.

1984-01-01

Two computer programmes have been written for use on a fully automated Siemens SRS200 sequential X-ray-fluorescence spectrometer. The first of these is used to control the spectrometer via an LC200 logic controller using a Data General Nova IV minicomputer; the second is used for the on-line evaluation of the intensity results and the printout of the analytical results. This system is an alternative to the systems offered by Siemens Ltd, which consist of a Process PR310 or Digital DEC PDP1103 computer and the Siemens Spectra 310 software package. The multibatch capabilities of the programmes, with the option of measuring one sample or a tray of samples before the results are calculated, give the new programmes a major advantage over the dedicated software and, together with the elimination of human error in calculation, have resulted in increased efficiency and quality in routine analyses. A description is given of the two programmes, as well as instruction and guidelines to the user

Ceramic Technologies for Sustainability: Perspectives from Siemens Corporate Technology

Energy Technology Data Exchange (ETDEWEB)

Rossner, W, E-mail: wolfgang.rossner@siemens.com [Ceramic Materials and Devices, Siemens AG, Corporate Technology, 81739 Munich (Germany)

2011-05-15

Climate change, environmental care, energy efficiency, scarcity of resources, population growth, demographic change, urbanization and globalization are the most pressing questions in the coming century. They will have an effect on all regions and groups of global society. Effective solutions will require immediate, efficient and concerted activities in all areas at the social, economic and environmental level. Since the 1980s it has been understood that developments should examine their sustainability more seriously to ensure that they do not compromise the ability of future generations to meet their own needs. This has also attributes to the sustainability demand of ceramic technologies. In the last decades a wide variety of ceramics developments have been brought to the markets, ranging from human implants to thermal barrier coatings in fossil power plants. There are innovative developments which should enter the market within the next years like solid oxide fuel cells or separation membranes for gas and liquids. Further ahead there will be ceramics with self-adapting, self-healing and multifunctional features to generate novel applications to save energy and to reduce carbon footprints across the entire value creation process of energy, industry, transportation and manufacturing.

Ceramic Technologies for Sustainability: Perspectives from Siemens Corporate Technology

Science.gov (United States)

Rossner, W.

2011-05-01

Climate change, environmental care, energy efficiency, scarcity of resources, population growth, demographic change, urbanization and globalization are the most pressing questions in the coming century. They will have an effect on all regions and groups of global society. Effective solutions will require immediate, efficient and concerted activities in all areas at the social, economic and environmental level. Since the 1980s it has been understood that developments should examine their sustainability more seriously to ensure that they do not compromise the ability of future generations to meet their own needs. This has also attributes to the sustainability demand of ceramic technologies. In the last decades a wide variety of ceramics developments have been brought to the markets, ranging from human implants to thermal barrier coatings in fossil power plants. There are innovative developments which should enter the market within the next years like solid oxide fuel cells or separation membranes for gas and liquids. Further ahead there will be ceramics with self-adapting, self-healing and multifunctional features to generate novel applications to save energy and to reduce carbon footprints across the entire value creation process of energy, industry, transportation and manufacturing.

Ceramic Technologies for Sustainability: Perspectives from Siemens Corporate Technology

International Nuclear Information System (INIS)

Rossner, W

2011-01-01

Climate change, environmental care, energy efficiency, scarcity of resources, population growth, demographic change, urbanization and globalization are the most pressing questions in the coming century. They will have an effect on all regions and groups of global society. Effective solutions will require immediate, efficient and concerted activities in all areas at the social, economic and environmental level. Since the 1980s it has been understood that developments should examine their sustainability more seriously to ensure that they do not compromise the ability of future generations to meet their own needs. This has also attributes to the sustainability demand of ceramic technologies. In the last decades a wide variety of ceramics developments have been brought to the markets, ranging from human implants to thermal barrier coatings in fossil power plants. There are innovative developments which should enter the market within the next years like solid oxide fuel cells or separation membranes for gas and liquids. Further ahead there will be ceramics with self-adapting, self-healing and multifunctional features to generate novel applications to save energy and to reduce carbon footprints across the entire value creation process of energy, industry, transportation and manufacturing.

Christ-Siemens-Touraine syndrome with cleft palate, absent nipples ...

African Journals Online (AJOL)

Rabah M. Shawky

2015-06-27

Jun 27, 2015 ... Pediatric Department, Genetics Unit, Ain Shams University, Egypt. Received 26 ... Our patient had also gallstones which were not reported previously and .... of bacterial cultures susceptible to dental caries as detected in our patient .... ment of dry eyes to surgical management with its complica- tions [22].

The Siemens-Argonaut reactor as a driver zone for a high-temperature reactor cell. Der Siemens-Argonaut-Reaktor als Treiberzone fuer eine Hochtemperaturreaktorzelle

Energy Technology Data Exchange (ETDEWEB)

Mueller, H; Schuerrer, F; Ninaus, W; Oswald, K; Rabitsch, H; Kreiner, H [Technische Univ., Graz (Austria). Inst. fuer Theoretische Physik und Reaktorphysik; Neef, R D [Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Reaktorentwicklung

1984-12-15

To enable a validation of neutron physics calculation methods for pebble bed reactors the inner reflector of an Argonaut research reactor was substituted by a full of about 1200 fuel elements of the AVR-Juelich type. The report describes the measuring instruments and the reactor physical layout of the arrangement by the code packages GAMTEREX, ZUT-D.G.L. and MUPO. Comparison of calculated reaction rates with measurements show good agreement. Application of the codes to high-temperature reactors in abnormal states is envisaged. (Author, translated by G.Q.)

Quality control of portal imaging with PTW EPID QC PHANTOM registered

International Nuclear Information System (INIS)

Pesznyak, Csilla; Kiraly, Reka; Polgar, Istvan; Zarand, Pal; Mayer, Arpad; Fekete, Gabor; Mozes, Arpad; Kiss, Balazs

2009-01-01

Purpose: quality assurance (QA) and quality control (QC) of different electronic portal imaging devices (EPID) and portal images with the PTW EPID QC PHANTOM registered . Material and methods: characteristic properties of images of different file formats were measured on Siemens OptiVue500aSi registered , Siemens BeamView Plus registered , Elekta iView registered , and Varian PortalVision trademark and analyzed with the epidSoft registered 2.0 program in four radiation therapy centers. The portal images were taken with Kodak X-OMAT V registered and the Kodak Portal Localisation ReadyPack registered films and evaluated with the same program. Results: the optimal exposition both for EPIDs and portal films of different kind was determined. For double exposition, the 2+1 MU values can be recommended in the case of Siemens OptiVue500aSi registered , Elekta iView registered and Kodak Portal Localisation ReadyPack registered films, while for Siemens BeamView Plus registered , Varian PortalVision trademark and Kodak X-OMAT V registered film 7+7 MU is recommended. Conclusion: the PTW EPID QC PHANTOM registered can be used not only for amorphous silicon EPIDs but also for images taken with a video-based system or by using an ionization chamber matrix or for portal film. For analysis of QC tests, a standardized format (used at the acceptance test) should be applied, as the results are dependent on the file format used. (orig.)

Evaluation of technology transfer on collider quadrupole manufacture at LBL

International Nuclear Information System (INIS)

Boeer, J.; Fechteler, H.; Moryson, H.; Sommer, F.; Grueneberg, H.; Kreutz, R.; Krischel, D.; Bensiek, W.; Ryan, B.

1992-01-01

As part of the contract on the collider quadruple magnets a technology transfer to Siemens Power Generation Group (KWU) was performed at Lawrence Berkeley Laboratory, Berkeley in September 1991. One inner and outer 1 m long coil each should be manufactured under the surveillance of LBL staff to become familiar with the coil production facilities available at LBL. In addition, KWU had the possibility to observe the production process of 5 m quadruple coils. The work is successfully completed and provided additional information for the further hardware operations at the Siemens site

Knowing the field

Energy Technology Data Exchange (ETDEWEB)

Gloekler, W.; Schmitt, W. [Siemens AG (Germany)

2005-05-01

The paper describes the development of electrical equipment for a new Chinese shaft winding installation. In collaboration with Siemag GmbH, the Siemens Industrial Solutions and Services Group has now delivered a new shaft winding installation for the Tunliu mine in Shanxi province. It has two winders with synchronous motor drives, each with 4000 kW output and Simovert ML2 DC link converters. Siemens I & S is re-equipping all the winders with the Simatic S7-400 mine winding control system and Profibus DP. 4 figs. 1 tab.

Study of two novel large-field-of-view image intensifiers versus conventional chest radiography with use of FROC methods and simulated pulmonary nodules

International Nuclear Information System (INIS)

Winter, L.H.L.; Chakraborty, D.P.; Van Waes, P.F.G.M.; Puylaert, C.B.A.J.

1989-01-01

Two novel large-field-of-view image intensifier (LFOV 1.1) tubes have been introduced whose image area makes them suitable for chest imaging. Both modalities present a 100-mm hard-copy image to the radiologist. A pulmonary nodule performance experiment was done to compare the diagnostic accuracy of these tubes with conventional full-size chest images. The data were analyzed with the maximum-likelihood FROCFIT program. The relative ranking in terms of decreasing A1 values was TLX, Siemens 43-cm mode, conventional radiography, and Siemens 57-cm mode

MRS using a FUELSTOR vault

International Nuclear Information System (INIS)

Valentine, M.K.; Gunther, H.

1992-01-01

Siemens Nuclear Power Corporation and Siemens-KWU have developed a dry-vault storage concept for interim storage of the nation's spent commercial nuclear fuel. This paper discusses the concept called a FUELSTOR vault which seals individual PWR fuel assemblies in an inert atmosphere within a welded canister, then stores the canisters in a horizontal array. The canisters are cooled passively by natural convection. The FUELSTOR vault assures safe, long-term storage with high fuel-storage density, and is designed for maximum radiation shielding and protection of the fuel against natural and man-made accidents

Factors related to the design and implementation of an 'design for environment' process

DEFF Research Database (Denmark)

Skelton, Kristen; Knitl, Teresa

2013-01-01

In the last two decades, Siemens AG has systematically built up the topic of environmental protection within its core functions. The company is currently expanding its focus by including additional product and supply related environmental activities to enable strategic and inclusive decisions. Most...... recently, the Energy Sector of Siemens AG developed a Design for Environment (DfE) process based on ISO/TR 14062 to integrate environmental issues into product design and development. This paper briefly presents the DfE process and the feedback that was gathered from engineers as input to improve...

Problems of locomotive wheel wear in fleet replacement

Directory of Open Access Journals (Sweden)

L.P. Lingaytis

2013-08-01

Full Text Available Purpose. To conduct a research and find out the causes of defects appearing on the wheel thread of freight locomotives 2М62 and SIEMENS ER20CF. Methodology. To find the ways to solve this problem comparing the locomotive designs and their operating conditions. Findings. After examining the nature of the wheel wear the main difference was found: in locomotives of the 2M62 line wears the wheel flange, and in the locomotives SIEMENS ER20CF – the tread surface. After installation on the 2M62 locomotive the lubrication system of flanges their wear rate significantly decreased. On the new freight locomotives SIEMENS ER20CF the flange lubrication systems of the wheel set have been already installed at the factory, however the wheel thread is wearing. As for locomotives 2M62, and on locomotives SIEMENS ER20CF most wear profile skating wheels of the first wheel set. On both locomotive lines the 2М62 and the SIEMENS ER20CF the tread profile of the first wheel set most of all is subject to the wear. After reaching the 170 000 km run, the tread surface of some wheels begins to crumble. There was a suspicion that the reason for crumb formation of the wheel surface may be insufficient or excessive wheel hardness or its chemical composition. In order to confirm or deny this suspicion the following studies were conducted: the examination of the rim surface, the study of the wheel metal hardness and the document analysis of the wheel production and their comparison with the results of wheel hardness measurement. Practical value. The technical condition of locomotives is one of the bases of safety and reliability of the rolling stock. The reduction of the wheel wear significantly reduces the operating costs of railway transport. After study completion it was found that there was no evidence to suggest that the ratio of the wheel-rail hardness could be the cause of the wheel surface crumbling.

Analysis of corrosion behavior of KOFA cladding

International Nuclear Information System (INIS)

Lee, Chan Bock; Kim, Ki Hang; Seo, Keum Seok; Chung, Jin Gon

1994-01-01

The corrosion behavior of KOFA cladding was analyzed using the oxide measurement data of KOFA fuel irradiated up to the fuel rod burnup of 35,000 MWD/MTU for two cycles in Kori-2. Even though KOFA cladding is a standard Zircaloy-4 manufactured by Westinghouse according to the Siemens/KWU's HCW (Highly Cold Worked) standard Zircaloy-4 specification, it was expected that in-pile corrosion behavior of KOFA cladding would not be equivalent to that of Siemens/KWU's cladding due to the differences in such manufacturing processes as cold work and heat treatment. The analysis of measured KOFA cladding oxidation showed that oxidation of KOFA cladding is at least 19 % lower than the design analysis based upon Siemens/KWU's HCW standard Zircaloy-4 cladding. Lower corrosion of KOFA cladding seems to result from the differences in the manufacturing processes and chemical composition although the burnup and oxide layer thickness of the measured fuel rods is relatively low and the amount of the oxidation data base is small

The licensing procedure for an intermediate storage facility for radioactive waste in Hanau

International Nuclear Information System (INIS)

Funke, P.; Graebener, K.H.

2001-01-01

Since the beginnings of nuclear energy utilisation in Germany, Hanau has been well-known worldwide as the centre for processing nuclear fuels. Names like Nukem, Alkem, RBU and Siemens are synonymous with the production of fuel elements made of highly enriched uranium for material test reactors, low-enriched uranium and uranium-plutonium mixtures (MOX) for prototype reactors and power reactors. Since the Transnuklear controversy in the late eighties, and particularly during the time of the Socialist-Green coalition in Hesse, the firms in Hanau have increasingly downscaled their activities, and finally closed down their fuel element facilities. Decommissioning of the facilities has been approved under paragraph 7 Para. 3 of the German atomic energy act (AtG). Decommissioning at the Uranium Processing Division of Siemens AG, the former RBU, is already well advanced, while Siemens' MOX Processing Division, the former Alkem, is currently being emptied of remaining nuclear fuels; at Nukem, the first buildings have been demolished. The radioactive waste encountered during decommissioning contains enriched uranium and plutonium, and thus constitutes a special category of radioactive waste. (orig.)

Control interlock and monitoring system for 80 KW IOT based RF power amplifier system at 505.812 MHz for Indus-2

International Nuclear Information System (INIS)

Kumar, Gautam; Deo, R.K.; Jain, M.K.; Bagre, Sunil; Hannurkar, P.R.

2013-01-01

For 80 kW inductive output tube (IOT) based RF power amplifier system at 505.812 MHz for Indus-2, a control, interlock and monitoring system is realized. This is to facilitate proper start-up and shutdown of the amplifier system, monitor various parameters to detect any malfunction during its operation and to bring the system in a safe stage, thereby assuring reliable operation of the amplifier system. This high power amplifier system incorporates interlocks such as cooling interlocks, various voltage and current interlocks and time critical RF interlocks. Processing of operation sequence, cooling interlocks and various voltage and current interlocks have been realized by using Siemens make S7-CPU-315-2DP (CPU) based programmable logic controller (PLC) system. While time critical or fast interlocks have been realized by using Siemens make FPGA based Boolean Co-processor FM-352-5 which operates in standalone mode. Siemens make operating panel OP277 6'' is being used as a human machine interface (HMI) device for command, data, alarm generation and process parameter monitoring. (author)

Status of fast breeder development in Germany

International Nuclear Information System (INIS)

Heusener, G.

1992-01-01

The German Minister for Research and Technology (BMFT), Dr. Heinz Riesenhuber, announced on March 20, 1991 that SNR 300, the fast breeder power plant at Kalkar, shall be abandoned. This message followed a top level meeting between BMFT officials and senior managers of Siemens, RWE, PreuBenElektra und Bayernwerk. BMFT, vendor Siemens and the three utilities had carried the interim finance costs of DM 105 million yearly since 1989. The licensing procedure had been obstructed during a long time by the responsible authorities. For several years the licensing process for the last permits on nuclear operation of KKW Kalkar had been held up by the government of the state of North Rhine-Westphalia (NWR). Licensing of nuclear power plants is the responsibility of the states, according to the German Atomic Act. The state of NRW turned against the SNR 300 project when the Social Democratic Party (SPD) started questioning nuclear power in 1985. Until then 17 partial licenses for SNR 300 had been granted, each time including an overall project approval. One of the consequences of the demise of SNR-300 was that Interatom GmbH, a subsidiary of Siemens AG, has been integrated into the division KWU of the Siemens AG on 1 October, 1991. For SNR 300 the turn-key contracts to the supplier company were cancelled by the operator on April 10, 1991 following the political termination of the SNR-300 Project. On August 23, 1991 after the termination of the SNR project, KfK decided to shutdown the KNK II reactor for final decommissioning

Status of fast breeder development in Germany

Energy Technology Data Exchange (ETDEWEB)

Heusener, G [Kernforschungszentrum Karlsruhe, Karlsruhe (Germany)

1992-07-01

The German Minister for Research and Technology (BMFT), Dr. Heinz Riesenhuber, announced on March 20, 1991 that SNR 300, the fast breeder power plant at Kalkar, shall be abandoned. This message followed a top level meeting between BMFT officials and senior managers of Siemens, RWE, PreuBenElektra und Bayernwerk. BMFT, vendor Siemens and the three utilities had carried the interim finance costs of DM 105 million yearly since 1989. The licensing procedure had been obstructed during a long time by the responsible authorities. For several years the licensing process for the last permits on nuclear operation of KKW Kalkar had been held up by the government of the state of North Rhine-Westphalia (NWR). Licensing of nuclear power plants is the responsibility of the states, according to the German Atomic Act. The state of NRW turned against the SNR 300 project when the Social Democratic Party (SPD) started questioning nuclear power in 1985. Until then 17 partial licenses for SNR 300 had been granted, each time including an overall project approval. One of the consequences of the demise of SNR-300 was that Interatom GmbH, a subsidiary of Siemens AG, has been integrated into the division KWU of the Siemens AG on 1 October, 1991. For SNR 300 the turn-key contracts to the supplier company were cancelled by the operator on April 10, 1991 following the political termination of the SNR-300 Project. On August 23, 1991 after the termination of the SNR project, KfK decided to shutdown the KNK II reactor for final decommissioning.

Quality control of portal imaging with PTW EPID QC PHANTOM {sup registered}

Energy Technology Data Exchange (ETDEWEB)

Pesznyak, Csilla; Kiraly, Reka; Polgar, Istvan; Zarand, Pal; Mayer, Arpad [Inst. of Oncoradiology, Uzsoki Hospital, Budapest (Hungary); Fekete, Gabor [Dept. of Oncotherapy, Univ. of Szeged (Hungary); Mozes, Arpad [Oncology Center, Kalman Pandy County Hospital, Gyula (Hungary); Kiss, Balazs [Dept. of Radiation Oncology, Markusovszky County Hospital, Szombathely (Hungary)

2009-01-15

Purpose: quality assurance (QA) and quality control (QC) of different electronic portal imaging devices (EPID) and portal images with the PTW EPID QC PHANTOM {sup registered}. Material and methods: characteristic properties of images of different file formats were measured on Siemens OptiVue500aSi {sup registered}, Siemens BeamView Plus {sup registered}, Elekta iView {sup registered}, and Varian PortalVision trademark and analyzed with the epidSoft {sup registered} 2.0 program in four radiation therapy centers. The portal images were taken with Kodak X-OMAT V {sup registered} and the Kodak Portal Localisation ReadyPack {sup registered} films and evaluated with the same program. Results: the optimal exposition both for EPIDs and portal films of different kind was determined. For double exposition, the 2+1 MU values can be recommended in the case of Siemens OptiVue500aSi {sup registered}, Elekta iView {sup registered} and Kodak Portal Localisation ReadyPack {sup registered} films, while for Siemens BeamView Plus {sup registered}, Varian PortalVision trademark and Kodak X-OMAT V {sup registered} film 7+7 MU is recommended. Conclusion: the PTW EPID QC PHANTOM {sup registered} can be used not only for amorphous silicon EPIDs but also for images taken with a video-based system or by using an ionization chamber matrix or for portal film. For analysis of QC tests, a standardized format (used at the acceptance test) should be applied, as the results are dependent on the file format used. (orig.)

Parallel computing by Monte Carlo codes MVP/GMVP

International Nuclear Information System (INIS)

Nagaya, Yasunobu; Nakagawa, Masayuki; Mori, Takamasa

2001-01-01

General-purpose Monte Carlo codes MVP/GMVP are well-vectorized and thus enable us to perform high-speed Monte Carlo calculations. In order to achieve more speedups, we parallelized the codes on the different types of parallel computing platforms or by using a standard parallelization library MPI. The platforms used for benchmark calculations are a distributed-memory vector-parallel computer Fujitsu VPP500, a distributed-memory massively parallel computer Intel paragon and a distributed-memory scalar-parallel computer Hitachi SR2201, IBM SP2. As mentioned generally, linear speedup could be obtained for large-scale problems but parallelization efficiency decreased as the batch size per a processing element(PE) was smaller. It was also found that the statistical uncertainty for assembly powers was less than 0.1% by the PWR full-core calculation with more than 10 million histories and it took about 1.5 hours by massively parallel computing. (author)

[Introduction of hospital information system and anesthesia information management system into the perianesthetic practice at Osaka City University Hospital].

Science.gov (United States)

Shimizu, Motoko; Tanaka, Katsuaki; Hagiwara, Chie; Ikenaga, Kazutake; Yoshioka, Miwako; Asada, Akira

2011-06-01

Recently, the hospital information systems (HIS) and anesthesia information management systems (AIMS) have been rapidly improved and have been introduced into the clinical practice in Japan drastically; however, few reports have detailed their influences on clinical practice. We here report our experience. We introduced HIS (EGMAIN-EX, Fujitsu Co., Ltd.) in our preoperative evaluation clinic and in the postoperative care unit. AIMS (ORSYS, Philips Electronics Japan) was introduced almost only to the intraoperative management. It became easy for us to acquire patient's information and to share it with the medical staffs in the other departments. However, we had to invest large human resources for the introduction and maintenance of the HIS and the AIMS. Though AIMS is more useful in anesthetic management than HIS, it seems to be more suitable for coordination with the medical staffs in the other departments to use HIS for perioperative management than to use AIMS.

Contributions to the DGMK technical meeting `Energy and products from wastes and renewable resources`. Manuscripts; Beitraege zur DGMK-Fachbereichstagung ``Energetische und stoffliche Nutzung von Abfaellen und nachwachsenden Rohstoffen``. Autorenmanuskripte

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

Described are several methods of energetic use of wastes (mainly plastic wastes) and biomass, as well as the recycling of plastic wastes. Processes described here are: NOELL conversion process, Thermoselect, PyroMelt process, Siemens carbonization combustion process, as well as several methods of gasification, pyrolysis, combustion, co-combustion. (SR) [Deutsch] In diesem Tagungsband werden verschiedene Moeglichkeiten der Energiegewinnung aus Abfaellen (hauptsaechlich Kunststoffen) und Biomasse, sowie das Recycling von Kunststoffabfaellen dargestellt. Es wir d auf folgende Verfahren eingegangen: NOELL-Konversionsverfahren, Thermoselect, PyroMelt-Verfahren, Siemens Schwel-Brenn-Verfahren, sowie verschiedene Methoden der Vergasung, Pyrolyse, Verbrennung, Mitverbrennung. (SR)

Contributions to the DGMK technical meeting `Energy and products from wastes and renewable resources`. Manuscripts; Beitraege zur DGMK-Fachbereichstagung ``Energetische und stoffliche Nutzung von Abfaellen und nachwachsenden Rohstoffen``. Autorenmanuskripte

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Described are several methods of energetic use of wastes (mainly plastic wastes) and biomass, as well as the recycling of plastic wastes. Processes described here are: NOELL conversion process, Thermoselect, PyroMelt process, Siemens carbonization combustion process, as well as several methods of gasification, pyrolysis, combustion, co-combustion. (SR) [Deutsch] In diesem Tagungsband werden verschiedene Moeglichkeiten der Energiegewinnung aus Abfaellen (hauptsaechlich Kunststoffen) und Biomasse, sowie das Recycling von Kunststoffabfaellen dargestellt. Es wir d auf folgende Verfahren eingegangen: NOELL-Konversionsverfahren, Thermoselect, PyroMelt-Verfahren, Siemens Schwel-Brenn-Verfahren, sowie verschiedene Methoden der Vergasung, Pyrolyse, Verbrennung, Mitverbrennung. (SR)

La calidad del agua destilada en la determinación de cenizas conductimétricas en azúcares crudos

OpenAIRE

Roberto J Rodríguez-Mambuca; Julián Rodríguez-López; Armando Perdomo-Morales

2013-01-01

Se llevaron a cabo experimentos de determinaciones en paralelo de muestras de azúcar crudo usando el método de ceniza conductimétrica del ICUMSA 2007, con agua de conductividad de 2 μ Siemens/cm y una réplica utilizando agua destilada en el intervalo de 2 a 10 μ Siemens/cm, para evaluar la posibilidad de sustituir el agua de conductividad exigida por la técnica analítica por agua destilada común en estos análisis. Se evaluó estadísticamente el conjunto de 58 muestras pareadas y de este anális...

Assessment of a Siemens Tridoros 712 MP X-ray generator

International Nuclear Information System (INIS)

1982-03-01

The Tridoros 712 MP is a 3 phase, 12 pulse, 70kW generator prepared for 2-tube operation but capable of operating a third tube using an extension module with an additional high tension switch. This generator is extremely versatile. It provides microprocessor selection of radiographer parameters, with facilities for manual and auto-exposure control and anatomically programmed radiography; it has the capability of being extended for tomography, fluoroscopy and Loadix X-ray tube loading protection. In every mode of operation the operator is provided with all the necessary numerical data about the factors being used. The control buttons are housed under a clear transparent sheet together with the easily read illuminated displays. The control unit is easy to operate and simple to learn, the built-in overload protection ensuring that only acceptable factors can be preset. The anatomically programmed radiography facility allows selection from up to 49 programmes in each of two operating modes with or without auto-exposure control. This generator could be used for heavy workload such as casualty, with a capability of handling a wide range of examinations. (author)

Evaluation of clinical image processing algorithms used in digital mammography.

Science.gov (United States)

Zanca, Federica; Jacobs, Jurgen; Van Ongeval, Chantal; Claus, Filip; Celis, Valerie; Geniets, Catherine; Provost, Veerle; Pauwels, Herman; Marchal, Guy; Bosmans, Hilde

2009-03-01

Screening is the only proven approach to reduce the mortality of breast cancer, but significant numbers of breast cancers remain undetected even when all quality assurance guidelines are implemented. With the increasing adoption of digital mammography systems, image processing may be a key factor in the imaging chain. Although to our knowledge statistically significant effects of manufacturer-recommended image processings have not been previously demonstrated, the subjective experience of our radiologists, that the apparent image quality can vary considerably between different algorithms, motivated this study. This article addresses the impact of five such algorithms on the detection of clusters of microcalcifications. A database of unprocessed (raw) images of 200 normal digital mammograms, acquired with the Siemens Novation DR, was collected retrospectively. Realistic simulated microcalcification clusters were inserted in half of the unprocessed images. All unprocessed images were subsequently processed with five manufacturer-recommended image processing algorithms (Agfa Musica 1, IMS Raffaello Mammo 1.2, Sectra Mamea AB Sigmoid, Siemens OPVIEW v2, and Siemens OPVIEW v1). Four breast imaging radiologists were asked to locate and score the clusters in each image on a five point rating scale. The free-response data were analyzed by the jackknife free-response receiver operating characteristic (JAFROC) method and, for comparison, also with the receiver operating characteristic (ROC) method. JAFROC analysis revealed highly significant differences between the image processings (F = 8.51, p < 0.0001), suggesting that image processing strongly impacts the detectability of clusters. Siemens OPVIEW2 and Siemens OPVIEW1 yielded the highest and lowest performances, respectively. ROC analysis of the data also revealed significant differences between the processing but at lower significance (F = 3.47, p = 0.0305) than JAFROC. Both statistical analysis methods revealed that the

TH-AB-207A-09: Tailoring TCM Schemes to a Task: Evaluating the Impact of Customized TCM Profiles On Detection of Lung Nodules in Simulated CT Lung Cancer Screening

Energy Technology Data Exchange (ETDEWEB)

Hoffman, J; McNitt-Gray, M [Departments of Biomedical Physics and Radiology, David Geffen School of Medicine at UCLA, Los Angeles, CA (United States); Noo, F [University of Utah, Salt Lake City, UT (United States); Young, S [Department of Radiology, UCLA, Los Angeles, CA (United States)

2016-06-15

Purpose: Recent work has shown that current TCM profile designs boost detection of low-contrast lung lesions in the lung apices, but yield reduced detection performance in the mid and lower lung regions relative to fixed tube current cases. This observed imbalance suggests that the TCM scheme might be tailored in new ways to maximize nodule detection throughout the entire lung. In this work, we begin a preliminary investigation into custom TCM profiles in an attempt to achieve uniform lesion detection throughout the extent of the lung. Methods: Low-contrast (25HU), 6mm nodules representing ground glass opacities were simulated at 1mm intervals over the length the lungs in a voxelized model of the XCAT phantom, one nodule per lung, per simulated scan. Voxel values represented attenuation values at 80keV. CT projection data was created by simulating a finite focal spot and using Joseph’s method for forward projection; scanner geometry was that of the Siemens Sensation 64 and the X-ray source was simulated as an 80keV monochromatic beam. Noise realizations were created using Poisson statistics, a realistic bowtie filter and varying tube current. 500 noise realizations were created for the custom TCM designs. All reconstruction was done with FreeCT-wFBP. An SKE/BKE task was used in conjunction with a 2D Hotelling Observer to calculate area-under-the-curve (AUC) as a proxy for “detectability.” AUC was plotted as a function of nodule Z-location to create a “detectability map.” The detectability map for the custom TCM curve was qualitatively assessed relative to previous results for the fixed TC and clinical TCM cases for uniformity. Results: Detection uniformity was improved throughout the mid and lower lungs, however detection remained disproportionately high in the upper lung region. Conclusion: Detection uniformity was improved with a custom TC profile. Future work will incorporate an analytic, task-specific approach to optimize the TC scheme for nodule

TH-AB-207A-09: Tailoring TCM Schemes to a Task: Evaluating the Impact of Customized TCM Profiles On Detection of Lung Nodules in Simulated CT Lung Cancer Screening

International Nuclear Information System (INIS)

Hoffman, J; McNitt-Gray, M; Noo, F; Young, S

2016-01-01

Purpose: Recent work has shown that current TCM profile designs boost detection of low-contrast lung lesions in the lung apices, but yield reduced detection performance in the mid and lower lung regions relative to fixed tube current cases. This observed imbalance suggests that the TCM scheme might be tailored in new ways to maximize nodule detection throughout the entire lung. In this work, we begin a preliminary investigation into custom TCM profiles in an attempt to achieve uniform lesion detection throughout the extent of the lung. Methods: Low-contrast (25HU), 6mm nodules representing ground glass opacities were simulated at 1mm intervals over the length the lungs in a voxelized model of the XCAT phantom, one nodule per lung, per simulated scan. Voxel values represented attenuation values at 80keV. CT projection data was created by simulating a finite focal spot and using Joseph’s method for forward projection; scanner geometry was that of the Siemens Sensation 64 and the X-ray source was simulated as an 80keV monochromatic beam. Noise realizations were created using Poisson statistics, a realistic bowtie filter and varying tube current. 500 noise realizations were created for the custom TCM designs. All reconstruction was done with FreeCT_wFBP. An SKE/BKE task was used in conjunction with a 2D Hotelling Observer to calculate area-under-the-curve (AUC) as a proxy for “detectability.” AUC was plotted as a function of nodule Z-location to create a “detectability map.” The detectability map for the custom TCM curve was qualitatively assessed relative to previous results for the fixed TC and clinical TCM cases for uniformity. Results: Detection uniformity was improved throughout the mid and lower lungs, however detection remained disproportionately high in the upper lung region. Conclusion: Detection uniformity was improved with a custom TC profile. Future work will incorporate an analytic, task-specific approach to optimize the TC scheme for nodule

Quantitative comparison of noise texture across CT scanners from different manufacturers

International Nuclear Information System (INIS)

Solomon, Justin B.; Christianson, Olav; Samei, Ehsan

2012-01-01

Purpose: To quantitatively compare noise texture across computed tomography (CT) scanners from different manufacturers using the noise power spectrum (NPS). Methods: The American College of Radiology CT accreditation phantom (Gammex 464, Gammex, Inc., Middleton, WI) was imaged on two scanners: Discovery CT 750HD (GE Healthcare, Waukesha, WI), and SOMATOM Definition Flash (Siemens Healthcare, Germany), using a consistent acquisition protocol (120 kVp, 0.625/0.6 mm slice thickness, 250 mAs, and 22 cm field of view). Images were reconstructed using filtered backprojection and a wide selection of reconstruction kernels. For each image set, the 2D NPS were estimated from the uniform section of the phantom. The 2D spectra were normalized by their integral value, radially averaged, and filtered by the human visual response function. A systematic kernel-by-kernel comparison across manufacturers was performed by computing the root mean square difference (RMSD) and the peak frequency difference (PFD) between the NPS from different kernels. GE and Siemens kernels were compared and kernel pairs that minimized the RMSD and |PFD| were identified. Results: The RMSD (|PFD|) values between the NPS of GE and Siemens kernels varied from 0.01 mm 2 (0.002 mm −1 ) to 0.29 mm 2 (0.74 mm −1 ). The GE kernels “Soft,”“Standard,”“Chest,” and “Lung” closely matched the Siemens kernels “B35f,”“B43f,”“B41f,” and “B80f” (RMSD 2 , |PFD| −1 , respectively). The GE “Bone,”“Bone+,” and “Edge” kernels all matched most closely with Siemens “B75f” kernel but with sizeable RMSD and |PFD| values up to 0.18 mm 2 and 0.41 mm −1 , respectively. These sizeable RMSD and |PFD| values corresponded to visually perceivable differences in the noise texture of the images. Conclusions: It is possible to use the NPS to quantitatively compare noise texture across CT systems. The degree to which similar texture across scanners could be achieved varies and is

Pitfalls in urinary stone identification using CT attenuation values: Are we getting the same information on different scanner models?

Energy Technology Data Exchange (ETDEWEB)

Grosjean, Romain, E-mail: r.grosjean@chu-nancy.fr [IADI Laboratory, INSERM-U947, Nancy-University, Allée du Morvan, 54500 Vandoeuvre-les-Nancy (France); Daudon, Michel, E-mail: michel.daudon@tnn.aphp.fr [IADI Laboratory, INSERM-U947, Nancy-University, Allée du Morvan, 54500 Vandoeuvre-les-Nancy (France); Chammas, Mario F., E-mail: mariochammas@usp.br [University of Sao Paulo – Division of Urology, Av. Dr. Enéas de Carvalho Aguiar, 255, 7" o Andar – s. 7123, São Paulo (Brazil); Claudon, Michel, E-mail: m.claudon@chu-nancy.fr [IADI Laboratory, INSERM-U947, Nancy-University, Allée du Morvan, 54500 Vandoeuvre-les-Nancy (France); Eschwege, Pascal, E-mail: peschwege@yahoo.com [Department of Urology, Brabois Hospital, University Hospital of Nancy, Allée du Morvan, 54511 Vandoeuvre-les-Nancy (France); Felblinger, Jacques, E-mail: j.felblinger@chu-nancy.fr [IADI Laboratory, INSERM-U947, Nancy-University, Allée du Morvan, 54500 Vandoeuvre-les-Nancy (France); Hubert, Jacques, E-mail: j.hubert@chu-nancy.fr [Department of Urology, Brabois Hospital, University Hospital of Nancy, Allée du Morvan, 54511 Vandoeuvre-les-Nancy (France)

2013-08-15

Introduction: Evaluate the capability of different Computed Tomography scanners to determine urinary stone compositions based on CT attenuation values and to evaluate potential differences between each model. Methods: 241 human urinary stones were obtained and their biochemical composition determined. Four different CT scanners (Siemens, Philips, GEMS and Toshiba) were evaluated. Mean CT-attenuation values and the standard deviation were recorded separately and compared with a t-paired test. Results: For all tested CT scanners, when the classification of the various types of stones was arranged according to the mean CT-attenuation values and to the confidence interval, large overlappings between stone types were highlighted. The t-paired test showed that most stone types could not be identified. Some types of stones presented mean CT attenuation values significantly different from one CT scanner to another. At 80 kV, the mean CT attenuation values obtained with the Toshiba Aquilion were significantly different from those obtained with the Siemens Sensation. On the other hand, mean values obtained with the Philips Brilliance were all significantly equal to those obtained with the Siemens Sensation and with the Toshiba Aquilion. At 120 kV mean CT attenuation values of uric acid, cystine and struvite stones obtained with the Philips model are significantly different from those obtained with the Siemens and the Toshiba but equal to those obtained with the GE 64. Conclusions: According to our study, there is a great variability when different brands and models of scanners are compared directly. Furthermore, the CT scan analysis and HU evaluation appears to gather insufficient information in order to characterize and identify the composition of renal stones.

Pitfalls in urinary stone identification using CT attenuation values: Are we getting the same information on different scanner models?

International Nuclear Information System (INIS)

Grosjean, Romain; Daudon, Michel; o Andar – s. 7123, São Paulo (Brazil))" data-affiliation=" (University of Sao Paulo – Division of Urology, Av. Dr. Enéas de Carvalho Aguiar, 255, 7o Andar – s. 7123, São Paulo (Brazil))" >Chammas, Mario F.; Claudon, Michel; Eschwege, Pascal; Felblinger, Jacques; Hubert, Jacques

2013-01-01

Introduction: Evaluate the capability of different Computed Tomography scanners to determine urinary stone compositions based on CT attenuation values and to evaluate potential differences between each model. Methods: 241 human urinary stones were obtained and their biochemical composition determined. Four different CT scanners (Siemens, Philips, GEMS and Toshiba) were evaluated. Mean CT-attenuation values and the standard deviation were recorded separately and compared with a t-paired test. Results: For all tested CT scanners, when the classification of the various types of stones was arranged according to the mean CT-attenuation values and to the confidence interval, large overlappings between stone types were highlighted. The t-paired test showed that most stone types could not be identified. Some types of stones presented mean CT attenuation values significantly different from one CT scanner to another. At 80 kV, the mean CT attenuation values obtained with the Toshiba Aquilion were significantly different from those obtained with the Siemens Sensation. On the other hand, mean values obtained with the Philips Brilliance were all significantly equal to those obtained with the Siemens Sensation and with the Toshiba Aquilion. At 120 kV mean CT attenuation values of uric acid, cystine and struvite stones obtained with the Philips model are significantly different from those obtained with the Siemens and the Toshiba but equal to those obtained with the GE 64. Conclusions: According to our study, there is a great variability when different brands and models of scanners are compared directly. Furthermore, the CT scan analysis and HU evaluation appears to gather insufficient information in order to characterize and identify the composition of renal stones

Areva: questions about a champion

International Nuclear Information System (INIS)

Bottois, P.

2009-01-01

Siemens announced in January 26, 2009 its decision to leave Areva NP, i.e. the Areva/Siemens common daughter company for reactors. This news re-launches the questions about the long-term financing strategy of the Areva group, of its capitalistic partnerships and of its position in the world nuclear market. Siemens on its side wishes to preserve its position in this market and a possible cooperation with the Russian AtomEnergoProm is under discussion. Areva, the world leader of nuclear industry, integrates a mining activity as well and is the world number 3 of uranium exploitation (15% of the world offer). It wishes to double its production by 2012 thanks to big investments in Niger, Namibia and Canada. Areva is developing its enrichment capacities as well thanks to the future Georges-Besse II ultracentrifugation facility which is under construction at Tricastin (Drome, France) and which should be put into service in 2009. And finally, a second EPR (European pressurized reactor), the new generation of Areva reactors, is to be built at Penly (Haute Normandie, France) between 2012 and 2017 and will generate 1400 employments in the region. (J.S.)

Valve performance concept move from preventive to condition-oriented maintenance

International Nuclear Information System (INIS)

Zanner, G.; Kradepohl, P.

1996-01-01

As a turnkey supplier of nuclear and fossil power plants, Siemens must pay attention in concentrating, maintaining, and developing the expertise in many areas such as system design, components, materials, quality assurance, and qualification testing within centralized organizations. In the company segment VALVES, Siemens/KWU is staffed with experienced professionals who have serviced the power plant industry for about 25 years. The valve engineers deal with all kinds of valve and actuator-related activities like design ratings, development, qualifications, and ongoing improvements. In this regard, the engineers are involved in nearly all actual problems and suggested solutions through continuing dialogues with utilities, authorities, and vendors of valves and actuators

Large-field image intensifiers versus conventional chest radiography: ROC study with simulated interstitial disease

International Nuclear Information System (INIS)

Winter, L.H.L.; Chakraborty, D.P.; Waes, P.F.G.M.

1988-01-01

Two image intensifier tubes have recently been introduced whose large imaging area makes them suitable for chest imaging (Phillips Pulmodiagnost TLX slit II and Siemens TX 57 large entrance field II). Both modalities present a 10 x 10-cm hard copy image to the radiologist. A receiver operating characteristic (ROC) curve study with simulated interstitial disease was performed to compare the image quality of these image intensifiers with conventional chest images. The relative ranking in terms of decreasing ROC areas was Siemens, conventional, and Philips. Compared with conventional imaging, none of the differences in ROC curve area were statistically significant at the 5% level

Valve performance concept move from preventive to condition-oriented maintenance

Energy Technology Data Exchange (ETDEWEB)

Zanner, G.; Kradepohl, P.

1996-12-01

As a turnkey supplier of nuclear and fossil power plants, Siemens must pay attention in concentrating, maintaining, and developing the expertise in many areas such as system design, components, materials, quality assurance, and qualification testing within centralized organizations. In the company segment VALVES, Siemens/KWU is staffed with experienced professionals who have serviced the power plant industry for about 25 years. The valve engineers deal with all kinds of valve and actuator-related activities like design ratings, development, qualifications, and ongoing improvements. In this regard, the engineers are involved in nearly all actual problems and suggested solutions through continuing dialogues with utilities, authorities, and vendors of valves and actuators.

Advanced Nuclear Fuels Corporation: one year later

International Nuclear Information System (INIS)

Bjoernard, T.A.; Sofer, G.A.

1988-01-01

About one year ago, after 18 years of business as a wholly owned affiliate of Exxon Corporation, Exxon Nuclear Company was acquired by Siemens/KWU and its name was changed to Advanced Nuclear Fuels Corporation (ANF). This profile describes the status of ANF one year later, principally from the European perspective but with some mention of ANF's worldwide operations to provide a balanced picture. After one year of operation as an affiliate of Siemens/KWU, ANF's role remains as an independent international supplier of nuclear fuel and services to utilities in Europe, the USA and the Far East, but with substantially augmented capabilities resulting from the new affiliation

Structured Light-Based Motion Tracking in the Limited View of an MR Head Coil

DEFF Research Database (Denmark)

Erikshøj, M.; Olesen, Oline Vinter; Conradsen, Knut

2013-01-01

A markerless motion tracking (MT) system developed for use in PET brain imaging has been tested in the limited field of view (FOV) of the MR head coil from the Siemens Biograph mMR. The system is a 3D surface scanner that uses structured light (SL) to create point cloud reconstructions of the fac......A markerless motion tracking (MT) system developed for use in PET brain imaging has been tested in the limited field of view (FOV) of the MR head coil from the Siemens Biograph mMR. The system is a 3D surface scanner that uses structured light (SL) to create point cloud reconstructions...

Grooved tube plug rolls in

International Nuclear Information System (INIS)

Krausser, P.

1991-01-01

The removable plugs used to date by the Power Generation Group (KWU) of Siemens to seal defective steam generator tubes have a good track record. Their sealing principle is based on the elastic tensioning of three seal disks against the inside wall of the tube. Now a further removable plug is available -a roll-in plug with a metal-coated surface. It is particularly suitable for use in the roller-expanded zone of the tubes at the tube sheet. The plugs can be used in both Siemens-KWU steam generators and in steam generators manufactured in compliance with the guidelines of the ASME Code. (author)

Survey and research for the enhancement of large-scale technology development 3. Patent researches on new tasks for development under large-scale project; Ogata gijutsu kaihatsu suishin no tame no chosa kenkyu. 3. Ogata project shinki kaihatsu tema ni kansuru tokkyo chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

Regarding 'high-speed computation systems for technological use' and 'manganese nodule mining systems,' researches are conducted into technological trends from the viewpoint of patent. As for applications for patents involving the Josephson effect device, there are 79 patents disclosed in Japan, with applications from Japan recording a peak in 1977-1978 and those from overseas in 1974-1975. As for important applicants, IBM distinguishes itself among those overseas while, in Japan, the Nippon Telegraph and Telephone Public Corporation occupies 47%, and Fujitsu, Ltd., 34%. In the case of GaAs-based transistors, businesses in Japan occupies as much as 90% of the applications overwhelming overseas businesses occupying less than 10%. As for the patents on manganese nodule mining systems, 183 Japanese patents are pending, with 88 already granted in America. While the main concern in Japan has transferred from the continuous elevator bucket system of 1971-1974 to the fluid dredge system, the fluid dredge system has consistently been occupying the overpowering majority in America. (NEDO)

Hard disks with SCSI interface

CERN Document Server

Denisov, O Yu

1999-01-01

The testing of 20 models of hard SCSI-disks is carried out: the Fujitsu MAE3091LP; the IBM DDRS-39130, DGHS-318220, DNES-318350, DRHS-36V and DRVS-18V; the Quantum Atlas VI 18.2; the Viking 11 9.1; the Seagate ST118202LW, ST118273LW, ST118273W, ST318203LW, ST318275LW, ST34520W, ST39140LW and ST39173W; and the Western Digital WDE9100-0007, WDE9100-AV0016, WDE9100-AV0030 and WDE9180-0048. All tests ran under the Windows NT 4.0 workstation operating system with Service Pack 4, under video mode with 1024*768 pixel resolution, 32- bit colour depth and V-frequency equal to 85 Hz. The detailed description and characteristics of SCSI stores are presented. Test results (ZD Winstone 99 and ZD WinBench 99 tests) are given in both table and diagram (disk transfer rate) forms. (0 refs).

Performance evaluation for compressible flow calculations on five parallel computers of different architectures

International Nuclear Information System (INIS)

Kimura, Toshiya.

1997-03-01

A two-dimensional explicit Euler solver has been implemented for five MIMD parallel computers of different machine architectures in Center for Promotion of Computational Science and Engineering of Japan Atomic Energy Research Institute. These parallel computers are Fujitsu VPP300, NEC SX-4, CRAY T94, IBM SP2, and Hitachi SR2201. The code was parallelized by several parallelization methods, and a typical compressible flow problem has been calculated for different grid sizes changing the number of processors. Their effective performances for parallel calculations, such as calculation speed, speed-up ratio and parallel efficiency, have been investigated and evaluated. The communication time among processors has been also measured and evaluated. As a result, the differences on the performance and the characteristics between vector-parallel and scalar-parallel computers can be pointed, and it will present the basic data for efficient use of parallel computers and for large scale CFD simulations on parallel computers. (author)

Ces-VP: consultation expert system for vector programming of nuclear codes

International Nuclear Information System (INIS)

Fujisaki, Masahide; Makino, Mitsuhiro; Ishiguro, Misako

1988-08-01

Ces-VP is a prototype rule-based expert system for consulting the vector programming, based on the knowledge of vectorization of nuclear codes at JAERI during these 10 years. Experts in vectorization can restructure nuclear codes with high performance on vector processors, since they have know-how for choosing the best technique among a lot of techniques that were acquired from the experience of vectorization in the past. Frequency in trial and error will be reduced if a beginner can easily use the know-how of experts. In this report, at first the contents of Ces-VP and its intention are shown. Then, the method for acquiring the know-how of vectorization and the method for making rules from the know-how are described. The outline of Ces-VP implemented on Fujitsu expert tool ESHELL is described. Finally, the availability of Ces-VP is evaluated from the data gathered from practical use and its present problems are discussed. (author)

Humanoid Robotics: Real-Time Object Oriented Programming

Science.gov (United States)

Newton, Jason E.

2005-01-01

Programming of robots in today's world is often done in a procedural oriented fashion, where object oriented programming is not incorporated. In order to keep a robust architecture allowing for easy expansion of capabilities and a truly modular design, object oriented programming is required. However, concepts in object oriented programming are not typically applied to a real time environment. The Fujitsu HOAP-2 is the test bed for the development of a humanoid robot framework abstracting control of the robot into simple logical commands in a real time robotic system while allowing full access to all sensory data. In addition to interfacing between the motor and sensory systems, this paper discusses the software which operates multiple independently developed control systems simultaneously and the safety measures which keep the humanoid from damaging itself and its environment while running these systems. The use of this software decreases development time and costs and allows changes to be made while keeping results safe and predictable.

Vectorization, parallelization and porting of nuclear codes. Vectorization and parallelization. Progress report fiscal 1999

Energy Technology Data Exchange (ETDEWEB)

Adachi, Masaaki; Ogasawara, Shinobu; Kume, Etsuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Ishizuki, Shigeru; Nemoto, Toshiyuki; Kawasaki, Nobuo; Kawai, Wataru [Fujitsu Ltd., Tokyo (Japan); Yatake, Yo-ichi [Hitachi Ltd., Tokyo (Japan)

2001-02-01

Several computer codes in the nuclear field have been vectorized, parallelized and trans-ported on the FUJITSU VPP500 system, the AP3000 system, the SX-4 system and the Paragon system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. We dealt with 18 codes in fiscal 1999. These results are reported in 3 parts, i.e., the vectorization and the parallelization part on vector processors, the parallelization part on scalar processors and the porting part. In this report, we describe the vectorization and parallelization on vector processors. In this vectorization and parallelization on vector processors part, the vectorization of Relativistic Molecular Orbital Calculation code RSCAT, a microscopic transport code for high energy nuclear collisions code JAM, three-dimensional non-steady thermal-fluid analysis code STREAM, Relativistic Density Functional Theory code RDFT and High Speed Three-Dimensional Nodal Diffusion code MOSRA-Light on the VPP500 system and the SX-4 system are described. (author)

Framatome advanced nuclear power-benefits for our clients from the new company

International Nuclear Information System (INIS)

Weber, P.

2001-01-01

Framatome ANP (Advanced Nuclear Power) merges the complementary strengths of two global nuclear industry leaders Framatome and Siemens - offering clients the best technological solutions for safe, reliable and economical plant performance. With a combined workforce of 13,300 skilled individuals, Framatome ANP is now the nuclear industry's leading supplier. Serving as Original Equipment Manufacturer (OEM) for more than 90 reactors that provide about 30% of the world's total installed nuclear power capacity, our experienced resources remain focused on the local needs of individual clients, wherever in the world they may be. The Company main business used to be turnkey construction of complete Nuclear Power plants, BWR and PWR capabilities, heavy equipment manufacturing, comprehensive I and C capabilities, and also expertise and knowledge of VVER. Framatome ANP will benefit in all of its fields of activity of the experience gained through Framatome and Siemens' collaboration on the next generation reactor, the EPR, as well as on steam generators replacements and or modernization of VVER. Framatome ANP nuclear fuel designs for both PWR and BWR plants provide innovative features and world-leading performance. Framatome ANP is organized according a matrix organization with: - 4 Business Groups (Project and Engineering, Service, Nuclear Fuel, Mechanical Equipment) - 3 Regional Divisions (Framatome Advanced Nuclear Power S.A.S., France; Framatome Advanced Nuclear Power GmbH, Germany; Framatome Advanced Nuclear Power Inc., USA). By 30th January 2001 Siemens Nuclear Power GmbH, founded in 2000 as successor of the Nuclear Division of Siemens Power Generation Group (KWU), was renamed to Framatome Advanced Nuclear Power GmbH forming the German part of the world wide acting company. Over the past 40 years 23 nuclear power plants all around the world - not only pressurized and boiling water reactors, but also two heavy-watermoderated reactors have been designed, constructed and

International HTR activities

International Nuclear Information System (INIS)

Baust, E.; Weisbrodt, I.

1989-01-01

Asea Brown Boveri AG (ABB) and their subsidiary High Temperature Reactor Construction GmbH (HRB) have brought the pebble bed high temperature reactor to the edge of being ready for the market with the construction and operation of the AVR reactor at Juelich and the THTR 300 at Hamm-Uentrop. Siemens/Interatom have developed the HTR modular concept and, together with their partners HRB, KFA, Rheinbraun Bergbauforschung have taken the nuclear process heat project to its present advanced state of development. The further introduction of the HTR to the market is a long-term objective, due to the present market situation. ABB and Siemens AG have therefore agreed to collaborate by forming a joint company. (orig.)

Exposure to radiation in whole body and skull CT examinations depending upon parameters determined by the technique of examination

International Nuclear Information System (INIS)

Fiebach, B.J.O.; Makoski, H.B.; Ewen, K.

1983-01-01

The article gives the organ doses for whole body CT examinations of the thoracic region, the upper abdomen, the mesogastric and pelvic regions as well as of the lumbar vertebral column and for CT scanning of the skull. The examinations were performed using in Alderson-Rando phantom with the whole body computer thomograph Somatom DR2 supplied by Siemens and with the skull computer tomograph Siretom 2000, also supplied by Siemens, It was found that the magnitude of radiation exposure of the patient depends not only on instrument-specific properties, but also to a very large measure on the examination parameters and techniques which can vary considerably from one clinic to another. (orig.) [de

German-French PWR cooperation

International Nuclear Information System (INIS)

Ruess, F.; Vignon, D.

1990-01-01

In April 1989, the two leading European nuclear power plant vendors, Framatome and Siemens, signed an agreement on cooperation covering the joint development and worldwide marketing of pressurized water reactors. For this purpose a joint subsidiary, Nuclear Power International (NPI) was founded, in which equal interests are held by Framatome and Siemens. The firm has its headquarters in Paris and another sales office in Erlangen. Its main activities are the coordination of the development of a joint advanced pressurized water reactor technology and the marketing of pressurized water reactors. Until the joint technology under development has reached commercial maturity, the lines so far developed by the parent companies will continue to be distributed. (orig.) [de

Retrofit breakers resolve trip failures

International Nuclear Information System (INIS)

Hanna, G.L.

1995-01-01

This articles examines how power plants can use advance planning and retrofit equipment to upgrade existing systems while avoiding unnecessary downtime. A break that fails to open challenges the safety features of a nuclear power plant. To ensure reliable operations, the utility selected a comprehensive retrofit program to replace a third of the 200 breakers originally installed at the Shearon Harris Nuclear Power Plant. Under contract, the retrofits--Siemens RLN breakers--were built and qualified for nuclear service by Wyle Laboratories through a special teaming agreement with Siemens Energy and Automation. The project offers an excellent example of how a utility can use advance planning and retrofit equipment to upgrade its existing systems while avoiding unnecessary downtime

Methodology for cloud-based design of robots

Science.gov (United States)

Ogorodnikova, O. M.; Vaganov, K. A.; Putimtsev, I. D.

2017-09-01

This paper presents some important results for cloud-based designing a robot arm by a group of students. Methodology for the cloud-based design was developed and used to initiate interdisciplinary project about research and development of a specific manipulator. The whole project data files were hosted by Ural Federal University data center. The 3D (three-dimensional) model of the robot arm was created using Siemens PLM software (Product Lifecycle Management) and structured as a complex mechatronics product by means of Siemens Teamcenter thin client; all processes were performed in the clouds. The robot arm was designed in purpose to load blanks up to 1 kg into the work space of the milling machine for performing student's researches.

The EPR. A safe and competitive solution for future energy needs

International Nuclear Information System (INIS)

Leverenz, R.

2006-01-01

In 2002, the Finnish Government gave the go-ahead for construction of the country's fifth nuclear power plant unit. In December of 2003, the AREVA NP/Siemens Consortium was awarded a turnkey contract by the Finnish utility Teollisuuden Voima Oy (TVO) to build a new nuclear power plant at the Olkiluoto site where two boiling water reactor units are already in operation. Olkiluoto 3 is an EPR, and thus the world's very first third generation nuclear power plant under construction. The reactor is being supplied by AREVA NP, the turbine and generator by Siemens. AREVA NP, which is head of the consortium, is responsible for overall project management as well as technical and functional integration. (author)

The transfer function method for the evaluation of short-circuit tests and on-site diagnostics of power transformers; Die Uebertragungsfunktion als Methode zur Beurteilung der Stosskurzschlusspruefung und Vor-Ort-Isolationsdiagnose

Energy Technology Data Exchange (ETDEWEB)

Christian, J.; Feser, K. [Stuttgart Univ. (Germany). Inst. fuer Energieuebertragung und Hochspannungstechnik; Leibfried, T. [Siemens AG, Nuernberg (Germany). Geschaeftsgebiet Leistungstransformatoren; Jaeggi, F. [Aare-Tessin AG fuer Elektrizitaet, Olten (Switzerland)

1999-03-22

A short circuit test according to IEC 76-5 was performed on a 125 MVA, 245 kV/53 kV power transformer from the Siemens factory in Nuremberg at the Kema high power laboratory (Arnhem, Netherlands) in March 1997. Thereby, the transfer function method was examined as an additional method for evaluating the short-circuit test. The visual inspection of the transformer after returning to the Nuremberg factory carried out by engineers from Atel and Siemens and representatives of Kema showed no changes of the core and coil assembly. At the Flumenthal substation a second transformer of the same type was installed. Before commissioning, the transfer functions of both transformers have been measured. These measurements provide essential information concerning the comparability of measurements from different transformers and are the basis for measurements to be carried out in the future. (orig.) [Deutsch] Im Maerz 1997 wurde ein 125-MVA-Leistungstranformator aus dem Siemens Transformatorenwerk Nuernberg im Hochleistungslabor der Kema, Arnheim einer Stosskurzschlusspruefung unterzogen. Dabei wurde die Analyse der Uebertragungsfunktion des Transformators als zusaetzliche Methode zur Beurteilung der Stosskurzschlusspruefung untersucht. Der Aktivteil wurde danach im Herstellerwerk begutachtet. Dabei ergaben sich keine Beanstandungen. Im Umspannwerk Flumenthal wurde ein zweiter baugleicher Transformator installiert. Vor der Inbetriebnahme wurden zusaetzliche Vergleichsmessungen an den zwei baugleichen Transformatoren durchgefuehrt. (orig.)

Morphometric analysis - Cone beam computed tomography to predict bone quality and quantity.

Science.gov (United States)

Hohlweg-Majert, B; Metzger, M C; Kummer, T; Schulze, D

2011-07-01

Modified quantitative computed tomography is a method used to predict bone quality and quantify the bone mass of the jaw. The aim of this study was to determine whether bone quantity or quality was detected by cone beam computed tomography (CBCT) combined with image analysis. MATERIALS AND PROCEDURES: Different measurements recorded on two phantoms (Siemens phantom, Comac phantom) were evaluated on images taken with the Somatom VolumeZoom (Siemens Medical Solutions, Erlangen, Germany) and the NewTom 9000 (NIM s.r.l., Verona, Italy) in order to calculate a calibration curve. The spatial relationships of six sample cylinders and the repositioning from four pig skull halves relative to adjacent defined anatomical structures were assessed by means of three-dimensional visualization software. The calibration curves for computer tomography (CT) and cone beam computer tomography (CBCT) using the Siemens phantom showed linear correlation in both modalities between the Hounsfield Units (HU) and bone morphology. A correction factor for CBCT was calculated. Exact information about the micromorphology of the bone cylinders was only available using of micro computer tomography. Cone-beam computer tomography is a suitable choice for analysing bone mass, but, it does not give any information about bone quality. 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Performance comparison of the 4th generation Bio-Rad Laboratories GS HIV Combo Ag/Ab EIA on the EVOLIS™ automated system versus Abbott ARCHITECT HIV Ag/Ab Combo, Ortho Anti-HIV 1+2 EIA on Vitros ECi and Siemens HIV-1/O/2 enhanced on Advia Centaur.

Science.gov (United States)

Mitchell, Elizabeth O; Stewart, Greg; Bajzik, Olivier; Ferret, Mathieu; Bentsen, Christopher; Shriver, M Kathleen

2013-12-01

A multisite study was conducted to evaluate the performance of the Bio-Rad 4th generation GS HIV Combo Ag/Ab EIA versus Abbott 4th generation ARCHITECT HIV Ag/Ab Combo. The performance of two 3rd generation EIAs, Ortho Diagnostics Anti-HIV 1+2 EIA and Siemens HIV 1/O/2 was also evaluated. Study objective was comparison of analytical HIV-1 p24 antigen detection, sensitivity in HIV-1 seroconversion panels, specificity in blood donors and two HIV false reactive panels. Analytical sensitivity was evaluated with International HIV-1 p24 antigen standards, the AFFSAPS (pg/mL) and WHO 90/636 (IU/mL) standards; sensitivity in acute infection was compared on 55 seroconversion samples, and specificity was evaluated on 1000 negative blood donors and two false reactive panels. GS HIV Combo Ag/Ab demonstrated better analytical HIV antigen sensitivity compared to ARCHITECT HIV Ag/Ab Combo: 0.41 IU/mL versus 1.2 IU/mL (WHO) and 12.7 pg/mL versus 20.1 pg/mL (AFSSAPS); GS HIV Combo Ag/Ab EIA also demonstrated slightly better specificity compared to ARCHITECT HIV Ag/Ab Combo (100% versus 99.7%). The 4th generation HIV Combo tests detected seroconversion 7-11 days earlier than the 3rd generation HIV antibody only EIAs. Both 4th generation immunoassays demonstrated excellent performance in sensitivity, with the reduction of the serological window period (7-11 days earlier detection than the 3rd generation HIV tests). However, GS HIV Combo Ag/Ab demonstrated improved HIV antigen analytical sensitivity and slightly better specificity when compared to ARCHITECT HIV Ag/Ab Combo assay, with higher positive predictive values (PPV) for low prevalence populations. Copyright © 2013 Elsevier B.V. All rights reserved.

Ectodermal dysplasias

Science.gov (United States)

Anhidrotic ectodermal dysplasia; Christ-Siemens-Touraine syndrome; Anondontia; Incontinentia pigmenti ... These resources can provide more information on ectodermal dysplasias: Ectodermal Dysplasia Society -- www.ectodermaldysplasia.org National Foundation for ...

Eestlane, kes leiutas sülearvuti / Andres Reimer

Index Scriptorium Estoniae

Reimer, Andres

2006-01-01

Eestist Saksamaale emigreerunud disainerist, saksa elektroonikakontserni Siemens eksperimentaalstuudio juhist Tõnis Käost, kes disainis Siemensi kandilise nuppudega telefoni. Kommenteerivad Eesti Kunstiakadeemia professor Martin Pärn ja Aleksander Käo

Upgrading the Siemens Argonaut Reactor Graz with a digital monitoring system

International Nuclear Information System (INIS)

Froehlich, O.; Ninaus, W.

1999-01-01

This paper presents a modern design of a reactor monitoring system (MS) which was developed for a research reactor. This MS is using digital concepts, and it is more flexible than an analog MS, it co-operates better with the user, and it is a very helpful tool for a training-reactor in an university environment. The heart of the system is a process computer, and it was possible to access all important signals and functions of the original nuclear instrumentation by additional hardware. The monitoring software was written in C for the platform '32Bit-DOS-protected-mode' and shows on several high-resolution screen pages all the collected signals and the working conditions of the reactor. Moreover, all signals which are recorded on the random access memory can be saved to the hard disk of the computer and may thereby be used offline as well.(author)

Skypega saab sügisest helistada sama lihtsalt kui tavatelefoniga / Henrik Roonemaa

Index Scriptorium Estoniae

Roonemaa, Henrik

2004-01-01

Eesti programmeerijate abiga loodud tasuta helistamist võimaldavast internetitelefonist Skype, mille tarbeks toob Siemens müügile spetsiaalse juhtmeta lauatelefoni koos arvuti külge käiva adapteriga

MR imaging and CT findings after liver transplantation

International Nuclear Information System (INIS)

Langer, M.; Langer, R.; Scholz, A.; Zwicker, C.; Astinet, F.

1990-01-01

The aim of the paper is to evaluate MR imaging and dynamic CT as noninvasive procedures to image signs of graft failure after an orthotopic liver transplantation (OLT). Thirty MR studies and 50 dynamic CT examinations were performed within 20 days after OLT. MR examinations were performed with a 0.5-T Siemens Magnetom. CT scans were obtained by using a Siemens Somatom Plus. In all patients, MR images demonstrated a perivascular rim of intermediate signal intensity on T1-weighted and increased signal intensity on T2-weighted images in the hilum of the liver; in 20/26, this was seen in peripheral areas also. In all patients, a perivascular area of low attenuation was diagnosed at angio-CT

Preserving maintenance know-how from a nuclear vendor's viewpoint

International Nuclear Information System (INIS)

Huemmeler, A.; Sprehe, J.

2002-01-01

The merging of Europe's major nuclear vendors to form Framatome ANP established the largest nuclear engineering corporation in the world, with a separate regional company based in the German market. The headquarters of the German company may be in Erlangen and the customers also see familiar faces at all locations in Germany. Within the new, globally aligned Framatome ANP, Siemens is contributing towards preserving this know-how on the domestic market. But we are still not satisfied. Not only do we wish to retain our expertise in the field of maintenance - in collaboration with the customers as well as other major service providers, but Siemens also wants to continuously improve and expand it even further in the future. (orig.) [de

The Franko-German aproach for a nuclear power plant in Turkey

International Nuclear Information System (INIS)

Ruess, F.

1994-01-01

Nuclear Power International (N P1) has been established as a joint subsidiary of Siemens and Framatome in 1989, thereby combining the experience accumulated in both parent companies with more than 100,000 MW capacity installed or on order in nuclear field. We intend to compete in a potential nuclear power project in Turkey on the basis of the German Pressurized Water Reactor Technology. We intend to establish a Consortium which on the foreign suppliers side will include Siemens, Framatome and GEC-Alsthom. In addition to the foreign partners in the Consortium we will include the Turkish industry in our proposal in order to achieve a maximum possible local content, which in our previous proposal was in the range of 30 % of the contract-value

Three Steam Generator Replacement Projects in 1995

International Nuclear Information System (INIS)

Holz, R.; Clavier, G.

1996-01-01

Since the companies Siemens AG and Framatome S. A. joined their experience and efforts in the field of steam generator replacements and formed a consortium in 1991, the following projects were performed in 1995: Ringhals 3, Tihange 3 and Asco 1. Further projects will follow in 1996, i. e., Doel 4 and Asco 2. Currently, this European consortium is bidding for the contract to replace the steam generators at the Krsko NPP and hopes to be awarded in 1996. An overview of the way the Consortium Siemens and Framatome approaches SG replacement projects is given based on the projects performed in 1995. Various aspects of project planning, management, licensing, personnel qualification and techniques used on site will be discussed. (author)

Redes Sociales en la Educación Desafíos y estrategias

Directory of Open Access Journals (Sweden)

Mayorga-Albán, Amalín Ladaysé

2012-07-01

Full Text Available Social networks are not new, they have always existed. Today with the technological advances they have evolved into modern online communication links, producing impacts on society and education. Students of all levels are part of them and devote many hours to browsing them, something that worries parents and teachers, who fear it will negatively affect their academic activities. However, according to George Siemen`s concept of connectivism, the contacts of an online social network translate into valuable sources of information and feedback of academic content. Therefore it is considered that it is appropriate to use social networks in educational processes, through proper planning and implementation of strategies, rather than prohibiting or vetoing their use in educational institutions.

[Evaluation of DCA vantage for rapid in-clinic measurement of HbA1c on capillary blood in young type 1 diabetic patients].

Science.gov (United States)

El Arabi, H; Willems, D; Mélot, C; Dorchy, H

2013-01-01

Rapid in clinic measurement of glycated hemoglogin (HbA1c) allows to determine the level of metabolic control within a few minutes on capillary blood. We have evaluated the new DCA Vantage (Siemens) based on an immunological technique, replacing the DCA 2000+ (Siemens). The study included 120 unselected young type 1 diabetic patients, with different degrees of metabolic control. The DCA Vantage was compared with the HPLC system (Menarini HA 8160) whose deviation from the DCCT was Vantage was -0.40%. The agreement limits (+/- 1.96 SD) were between 0.14% and -0.93%; this means +/- 0.53% around -0.40%. In conclusion, the DCA Vantage underestimates HbA1c levels; however it met the acceptance criteria of having a coefficient of variation < 3%.

Comparison of three 108-MHZ systems for 1.6 MW

International Nuclear Information System (INIS)

Hutter, G.

1983-01-01

Advantages, disadvantages and performance of two completely different amplifier cavity types, together with the three high power tetrodes RS2074SK (Siemens), TH518 (Thomson CSF) and 8973 (Eimac) are reported

4 Tesla Whole Body MRI MRSI System for Investigation of Neurodegenerative Diseases

National Research Council Canada - National Science Library

Weiner, Michael W

2004-01-01

The overall long-term goal of imaging research to be performed with this 4 Tesla Siemens/Bruker MRI system is the development of improved diagnostic methods for accurate detection of neurodegenerative...

75 FR 22586 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of General...

Science.gov (United States)

2010-04-29

... Appliances Corp. (Bosch-Siemens Hausgerate GmbH), Electrolux Home Products, Equator, Fisher & Paykel... Corp. filed and was granted its waiver petition, \\2\\ as was Electrolux \\3\\ and Samsung.\\4\\ \\1\\ FR Vol...

QC in MRI: useful or superfluous?

Energy Technology Data Exchange (ETDEWEB)

Infantino, S; Malchair, F [Biomed Engineering, Boncelles (France)

1995-12-01

A European task group has developed a protocol for quality control (QC) in MRI. This protocol is essentially based on the control of image properties (uniformity of the signal, signal-to-noise ratio (SNR), resolution, distortion, ...). We applied this protocol to the Magnetom SP (Siemens) of the University Hospital in Liege (Belgium). We used the Siemens multi-purpose phantom, which does not permit a QC as complete and accurate as the test objects used in the protocol. The phantom simulates the magnetic properties of the body. The body and head coils were tested with and without a loading annulus that simulates the body conductivity. The following results were obtained: body coil: the signal, SNR, uniformity and artifacts were satisfactory just after a maintenance but had changed significantly and became unacceptable two weeks later. Head coil: the uniformity of the signal and SNR were satisfactory without the annulus. With the annulus the signal increased from the right to the left of the phantom of nearly 20%. This came from a lack of correction of uniformity in the static field. Other parameters (slice width and spacing, resolution and distortion) were satisfactory. Since the head coil problem did not appear during the maintenance we suggest Siemens QC should include observation of intensity profiles. It is recommended to archive the obtained images so that the evolution of performances of the scanner can be followed.

Optimising imaging parameters in experimental spiral CT

International Nuclear Information System (INIS)

Tiitola, M.; Vehmas, T.; Kivisaari, R.P.; Kivisaari, L.

1997-01-01

Purpose: This in vitro study was conducted to analyse lesion detection and relative radiation exposure in different CT techniques. Material and Methods: We used a plastic phantom (12 x 8 x 2 cm) containing holes filled with air or fluid of varying densities to simulate lesions. This was imaged with Siemens Somatom Plus S and GE High Speed Advantage units. We varied table feeds (3 and 6 mm/s in Siemens and 3 and 4.5 mm/s in GE) and increments (2 mm and 4 mm) while keeping collimation at 3 mm. The SmartScan program of GE and the reformating algorithm of Siemens were also analysed. To evaluate the different methods, the phatnom lesions were counted by 3 observers. Radiation exposures associated with each technique were also measured. Results: The images reformatted to a coronal direction were significantly inferior (p<0.01) to those in other techniques. The use of SmartScan did not influence lesion detection, nor did changes in pitch or increment. Spiral and non-spiral techniques proved to be equal. Radiation exposure was lowest when a greater pitch or the SmartScan program was used. Conclusion: Radiation exposure in CT can be limited without significantly impairing the image quality by using low-dose techniques. Reformatting to a coronal direction should be used with care as it debases the image quality. (orig.)

Assessment for the potential of Stuxnet attack on research reactor in Indonesia

International Nuclear Information System (INIS)

Eko H Riyadi

2013-01-01

Since discovered in June of 2010, the malware that named Stuxnet was directly electrify the world. The malware is interested the attentions of the media and security experts since infect instrumentation and control systems in industrial and caused significant damage. Stuxnet is a sophisticated kind of computer malware designed to sabotage industrial processes controlled by Siemens SIMATIC WinCC and PCS7. Even the malware developed to attack Iran's nuclear facilities have very specific goals and designed to infect Siemens SCADA systems are set up to control and monitor industrial processes. In Indonesia there are 3 research reactors i.e. Kartini in Jog jakarta, TRIGA in Bandung and RSG GA Siwabessy in Serpong. Last reactor has the largest capacity that was using the instrumentation and control system of the Siemens made. This study aims to determine the potential of the Stuxnet attack on research reactor with use methods and analysis the learning to the malware. With the configuration of the control system on research reactors, it is not impossible will be target of the Stuxnet attacks like as Iran's nuclear facility in Natanz. Although some security experts and anti virus have develop system patch and removal to fix this malware, but still needed the role of regulatory bodies to ensure that instrumentation and control system in research reactors are totally safe and secure from malware attacks. (author)

QC in MRI: useful or superfluous?

International Nuclear Information System (INIS)

Infantino, S.; Malchair, F.

1995-01-01

A European task group has developed a protocol for quality control (QC) in MRI. This protocol is essentially based on the control of image properties (uniformity of the signal, signal-to-noise ratio (SNR), resolution, distortion, ...). We applied this protocol to the Magnetom SP (Siemens) of the University Hospital in Liege (Belgium). We used the Siemens multi-purpose phantom, which does not permit a QC as complete and accurate as the test objects used in the protocol. The phantom simulates the magnetic properties of the body. The body and head coils were tested with and without a loading annulus that simulates the body conductivity. The following results were obtained: body coil: the signal, SNR, uniformity and artifacts were satisfactory just after a maintenance but had changed significantly and became unacceptable two weeks later. Head coil: the uniformity of the signal and SNR were satisfactory without the annulus. With the annulus the signal increased from the right to the left of the phantom of nearly 20%. This came from a lack of correction of uniformity in the static field. Other parameters (slice width and spacing, resolution and distortion) were satisfactory. Since the head coil problem did not appear during the maintenance we suggest Siemens QC should include observation of intensity profiles. It is recommended to archive the obtained images so that the evolution of performances of the scanner can be followed

Service and Maintenance - Lillgrund Offshore Wind Farm. Lillgrund Pilot Project

Energy Technology Data Exchange (ETDEWEB)

Soederberg, David; Weisbach, Henrik (Vattenfall Vindkraft AB, Stockholm (Sweden))

2008-11-15

This report aims to provide information of, and experiences from, service and maintenance of Lillgrund Offshore Wind Farm. The report deals with operation and maintenance (O and M) during construction, commissioning and the first three months of operation. Focus has been to describe the organization and cooperation between Vattenfall and Siemens. Experiences have been collected by interviews with representatives from Siemens and Vattenfall. The O and M strategy defined by Lillgrund's service and maintenance contract are based on a gradual take over of O and M. Siemens will be responsible for maintenance of Lillgrund during the first five years. During this five-year period, Vattenfall will build up its own maintenance organization for Lillgrund. The first three years, Vattenfall's technicians are supposed to form 30 % of the total number of maintenance technicians. The fourth and fifth year, the corresponding amount should be 50 %. During daytime, Lillgrund is operated locally. During nights and weekends, it is operated remotely by Vattenfall's operating centre in Esbjerg. The major O and M experience from Lillgrund is the need for good administrative and technical information systems. These systems should be implemented as soon as possible because of the large amounts of documentation that are created during the commissioning phase. The technical information systems must be able to present historic data of measurements in order to see trends and analyse faults

The Advantages and Disadvanatages of Civilian Employers Hiring National Guardsmen and Reservists

Science.gov (United States)

2014-12-12

Corporation South Dakota Game, Fish, and Parks Starbucks Corporation State of Vermont Sun Valley General Improvement District...Communications Nyemaster Goode Port of Seattle Siemens Corporation Tennessee Valley Authority Uniform Color Company Verizon Wireless...

Venous thromboembolism associated with protein S deficiency due ...

Indian Academy of Sciences (India)

EWA WYPASEK

2017-12-11

Dec 11, 2017 ... qualitative tests, PS deficiency is classified as type I (low- ... fied studies of genotype–phenotype correlation and search. 1047 .... assay (Berichrom Protein C, Siemens Healthcare Diagnos- ..... tional international cohort study.

Tartu rahu oli Eesti Vabariigi välispoliitika suurim saavutus : Aleksander Kink täitis tähtsat rolli rahu sõlmimisel / Anto Raukas

Index Scriptorium Estoniae

Raukas, Anto, 1935-

2003-01-01

Petrogradi Siemens-Shuckerti dünamovabriku eestlasest asedirektori ja tehnikateadlase osast Eesti ja Vene poliitikute vahendajana rahuläbirääkimiste eel 1919. aastal; ka tema hilisematest insenerlikest ideedest Eesti energiamajanduse vallas

Siemensi tulevane tegevjuht astus varjust välja / Erik Aru

Index Scriptorium Estoniae

Aru, Erik

2004-01-01

Siemensi juhiks saab strateegilise planeerimise doktor Klaus Kleinfeld. Firmal on eeskätt probleem kahe tegevusvaldkonna - info- ja sidesüsteemide ning transpordisüsteemidega. Lisad: Siemens AG; Rõhub innovaatilisusele nagu ka konkurendid

Gadolinia experience and design for PWR fuel cycles

International Nuclear Information System (INIS)

Stephenson, L. C.

2000-01-01

The purpose of this paper is to describe Siemens Power Corporation's (SPC) current experience with the burnable absorber gadolinia in PWR fuel assemblies, including optimized features of SPC's PWR gadolinia designs, and comparisons with other burnable absorbers. Siemens is the world leader in PWR gadolinia experience. More than 5,900 Siemens PWR gadolinia-bearing fuel assemblies have been irradiated. The use of gadolinia-bearing fuel provides significant flexibility in fuel cycle designs, allows for low radial leakage fuel management and extended operating cycles, and reduces BOC (beginning-of-cycle) soluble boron concentrations. The optimized use of an integral burnable neutron absorber is a design feature which provides improved economic performance for PWR fuel assemblies. This paper includes a comparison between three different types of integral burnable absorbers: gadolinia, Zirconium diboride and erbia. Fuel cycle design studies performed by Siemens have shown that the enrichment requirements for 18-24 month fuel cycles utilizing gadolinia or zirconium diboride integral fuel burnable absorbers can be approximately the same. Although a typical gadolinia residual penalty for a cycle design of this length is as low as 0.02-0.03 wt% U-235, the design flexibility of gadolinia allows for very aggressive low-leakage core loading plans which reduces the enrichment requirements for gadolinia-bearing fuel. SPC has optimized its use of gadolinia in PWR fuel cycles. Typically, low (2-4) weight percent Gd 2 O 3 is used for beginning to middle of cycle reactivity hold down as well as soluble boron concentration holddown at BOC. Higher concentrations of Gd 2 O 3 , such as 6 and 8 wt%, are used to control power peaking in assemblies later in the cycle. SPC has developed core strategies that maximize the use of lower gadolinia concentrations which significantly reduces the gadolinia residual reactivity penalty. This optimization includes minimizing the number of rods with

Effect of MR contrast agents on quantitative accuracy of PET in combined whole-body PET/MR imaging

Energy Technology Data Exchange (ETDEWEB)

Lois, Cristina [University of Santiago de Compostela, Department of Particle Physics, Santiago de Compostela (Spain); Health Research Institute of Santiago de Compostela (IDIS), Santiago de Compostela (Spain); Imaging Science Institute, Tuebingen (Germany); Bezrukov, Ilja [Eberhard Karls University, Laboratory for Preclinical Imaging and Imaging Technology of the Werner Siemens Foundation, Department of Preclinical Imaging and Radiopharmacy, Tuebingen (Germany); Max Plank Institute for Intelligent Systems, Department of Empirical Inference, Tuebingen (Germany); Schmidt, Holger [Eberhard Karls University, Laboratory for Preclinical Imaging and Imaging Technology of the Werner Siemens Foundation, Department of Preclinical Imaging and Radiopharmacy, Tuebingen (Germany); Eberhard Karls University, Diagnostic and Interventional Radiology, Department of Radiology, Tuebingen (Germany); Schwenzer, Nina; Werner, Matthias K. [Eberhard Karls University, Diagnostic and Interventional Radiology, Department of Radiology, Tuebingen (Germany); Kupferschlaeger, Juergen [Eberhard Karls University, Nuclear Medicine, Department of Radiology, Tuebingen (Germany); Beyer, Thomas [Imaging Science Institute, Tuebingen (Germany); cmi-experts GmbH, Zuerich (Switzerland)

2012-11-15

Clinical PET/MR acquisition protocols entail the use of MR contrast agents (MRCA) that could potentially affect PET quantification following MR-based attenuation correction (AC). We assessed the effect of oral and intravenous (IV) MRCA on PET quantification in PET/MR imaging. We employed two MRCA: Lumirem {sup registered} (oral) and Gadovist {sup registered} (IV). First, we determined their reference PET attenuation values using a PET transmission scan (ECAT-EXACT HR+, Siemens) and a CT scan (PET/CT Biograph 16 HI-REZ, Siemens). Second, we evaluated the attenuation of PET signals in the presence of MRCA. Phantoms were filled with clinically relevant concentrations of MRCA in a background of water and {sup 18}F-fluoride, and imaged using a PET/CT scanner (Biograph 16 HI-REZ, Siemens) and a PET/MR scanner (Biograph mMR, Siemens). Third, we investigated the effect of clinically relevant volumes of MRCA on MR-based AC using human pilot data: a patient study employing Gadovist {sup registered} (IV) and a volunteer study employing two different oral MRCA (Lumirem {sup registered} and pineapple juice). MR-based attenuation maps were calculated following Dixon-based fat-water segmentation and an external atlas-based and pattern recognition (AT and PR) algorithm. IV and oral MRCA in clinically relevant concentrations were found to have PET attenuation values similar to those of water. The phantom experiments showed that under clinical conditions IV and oral MRCA did not yield additional attenuation of PET emission signals. Patient scans showed that PET attenuation maps are not biased after the administration of IV MRCA but may be biased, however, after ingestion of iron oxide-based oral MRCA when segmentation-based AC algorithms are used. Alternative AC algorithms, such as AT and PR, or alternative oral contrast agents, such as pineapple juice, can yield unbiased attenuation maps. In clinical PET/MR scenarios MRCA are not expected to lead to markedly increased attenuation

Genetics Home Reference: dystrophic epidermolysis bullosa

Science.gov (United States)

... fragile and to blister easily. Blisters and skin erosions form in response to minor injury or friction, such as ... M, Favia G, Serpico R. Oro-dental manifestations in Hallopeau-Siemens-type recessive dystrophic epidermolysis ...

Study of the voxel-based specific regional analysis system for Alzheimer's disease imaging sequence after magnetic resonance apparatus replacement

International Nuclear Information System (INIS)

Tsukagoshi, Yuki; Kanai, Yoshihiro; Yasui, Gou; Abe, Yuuji; Maemura, Keisuke; Nakazawa, Masaki; Yamaji, Yuugo; Mihara, Ban

2012-01-01

In our institute, an MR apparatus, MAGNETOM VISION (Siemens) was replaced by ECHELON Vega (HITACHI). Z-score data acquired by MPRAGE (VISION) was compared with those by radio frequency-spoiled steady-state acquisition with rewinded gradient echo (RSSG) and gradient echo inversion recovery (GEIR) (ECHELON). For this study, ten normal volunteers were recruited and their data ware obtained within two months using both apparatuses. In addition, the difference of the contrasts of the images of these apparatuses was compared. There was a significant difference between Z-scores of MPRAGE and RSSG while there was no difference between MPRAGE and GEIR. As for the contrast, data of MPRAGE were similar to those of GEIR. To compare Z-scores acquired with MAGNTOM VISION (Siemens), it seems appropriate to use GEIR in ECHELON Vega. (author)

Design of monitoring system for mail-sorting based on the Profibus S7 series PLC

Science.gov (United States)

Zhang, W.; Jia, S. H.; Wang, Y. H.; Liu, H.; Tang, G. C.

2017-01-01

With the rapid development of the postal express, the workload of mail sorting is increasing, but the automatic technology of mail sorting is not mature enough. In view of this, the system uses Siemens S7-300 PLC as the main station controller, PLC of Siemens S7-200/400 is from the station controller, through the man-machine interface configuration software MCGS, PROFIBUS-DP communication, RFID technology and mechanical sorting hand achieve mail classification sorting monitoring. Among them, distinguish mail-sorting by scanning RFID posted in the mail electronic bar code (fixed code), the system uses the corresponding controller on the acquisition of information processing, the processed information transmit to the sorting manipulator by PROFIBUS-DP. The system can realize accurate and efficient mail sorting, which will promote the development of mail sorting technology.

Scenario development, qualitative causal analysis and system dynamics

Directory of Open Access Journals (Sweden)

Michael H. Ruge

2009-02-01

Full Text Available The aim of this article is to demonstrate that technology assessments can be supported by methods such as scenario modeling and qualitative causal analysis. At Siemens, these techniques are used to develop preliminary purely qualitative models. These or parts of these comprehensive models may be extended to system dynamics models. While it is currently not possible to automatically generate a system dynamics models (or vice versa, obtain a qualitative simulation model from a system dynamics model, the two thechniques scenario development and qualitative causal analysis provide valuable indications on how to proceed towards a system dynamics model. For the qualitative analysis phase, the Siemens – proprietary prototype Computer – Aided Technology Assessment Software (CATS supportes complete cycle and submodel analysis. Keywords: Health care, telecommucations, qualitative model, sensitivity analysis, system dynamics.

Relative measurements of fast neutron contamination in 18-MV photon beams from two linear accelerators and a betatron

International Nuclear Information System (INIS)

Gur, D.; Bukovitz, A.G.; Rosen, J.C.; Holmes, B.G.

1979-01-01

Fast neutron contamination in photon beams in the 20 MV range have been reported in recent years. In order to determine if the variations were due mainly to differences in measurement procedures, or inherent in the design of the accelerators, three different 18-MV (BJR) photon beams were compared using identical analytical techniques. The units studied were a Philips SL/75-20 and a Siemens Mevatron-20 linear accelerators and a Schimadzu betatron. Gamma spectroscopy of an activated aluminum foil was the method used. By comparing the relative amounts of neutron contamination, errors associated with absolute measurements such as detector efficiency and differences in activation foils were eliminated. Fast neutron contaminations per rad of x rays in a ratio of 6.7:3.7:1 were found for the Philips, Schimadzu and Siemens accelerators, respectively

Radioactive waste package assay facility. Volume 3. Data processing

International Nuclear Information System (INIS)

Creamer, S.C.; Lalies, A.A.; Wise, M.O.

1992-01-01

This report, in three volumes, covers the work carried out by Taylor Woodrow Construction Ltd, and two major sub-contractors: Harwell Laboratory (AEA Technology) and Siemens Plessey Controls Ltd, on the development of a radioactive waste package assay facility, for cemented 500 litre intermediate level waste drums. Volume 3, describes the work carried out by Siemens Plessey Controls Ltd on the data-processing aspects of an integrated waste assay facility. It introduces the need for a mathematical model of the assay process and develops a deterministic model which could be tested using Harwell experimental data. Relevant nuclear reactions are identified. Full implementation of the model was not possible within the scope of the Harwell experimental work, although calculations suggested that the model behaved as predicted by theory. 34 figs., 52 refs., 5 tabs

Contained x-ray diffraction goniometer for examination of radioactive materials

International Nuclear Information System (INIS)

Smith, P.K.; Osgood, B.C.; Blaser, D.E.; Howell, R.E.; Stuhler, H.; Stauver, J.

1987-11-01

Radioactive materials are being characterized for chemical form and certain physical properties with an x-ray diffraction goniometer customized for containment in a shielded alpha glovebox. A Siemens D500 goniometer was customized by Siemens to locate the associated electronics and x-ray generator outside the glovebox to minimize corrosion and facilitate maintenance. A graphite monochromator is used with a shielded scintillation detector to separate diffracted x-radiation from nuclear radiation. The diffraction system is computer automated for data acquisition and reduction. The facility is designed to handle primarily alpha- and beta-emitting samples with moderate neutron and gamma radiation. Samples containing plutonium, enriched uranium, and other transuranic elements are analyzed in support of site nuclear operations and development programs on nuclear waste, chemical separations, reactor fuels, and product forms

New intensifying screens in clinical radiology. Pt. 2

International Nuclear Information System (INIS)

Freyschmidt, J.; Saure, D.; Hagemann, G.

1976-01-01

A clinically applicable procedure for testing new intensifying rare earth screens, as well as the special Siemens' screen is described. The results are related to universal screeens. The film-screen combination α 4XD (gadolinium oxysulphide with normal, green sensitive film) results in a reduction of radiation dose to half with detail comparable with universal screens. The Siemens' special screen has similar advantages. Screens with a higher intensification factor and reduction of the mAs to one sixth results in loss of detail. This does not necessarily reduce their clinical use if they are used for appropriate purposes. The results of this clinically orientated technique agreed well with physically objective methods using lead grids. The advantages of the new screens are discussed in terms of their practical application. (orig.) [de

[New intensifying screens in clinical radiology. II. Examinations in clinical practice].

Science.gov (United States)

Freyschmidt, J; Saure, D; Hagemann, G

1976-09-01

A clinically applicable procedure for testing new intensifying rare earth screens, as well as the special Siemens' screen is described. The results are related to universal screens. The film-screen combination alpha 4XD (gadolinium oxysulphide with normal, green sensitive film) results in a reduction of radiation dose to half with detail comparable with universal screens. The Siemens' special screen has similar advantages. Screens with a higher intensification factor and reduction of the mAs to one sixth results in loss of detail. This does not necessarily reduce their clinical use if they are used for appropriate purposes. The results of this clinically orientated technique agreed well with physically objective methods using lead grids. The advantages of the new screens are discussed in terms of their practical application.

ANSTO - program of research 1991-1992

International Nuclear Information System (INIS)

1991-01-01

The direction and priorities of the Australian Nuclear Science and Technology Organisation (ANSTO) research program are outlined. During the period under review. Many of the initiatives of previous years come to fruition, adding significant strength and dimension to the Organisation's research capabilities. The advent of Australian Supercomputing Technology, a joint venture between Fujitsu Australia and ANSTO, will enable the grand challenges of computational science to underpin Ansto research generally but specifically in environmental science. The development of the accelerator mass spectrometry facilities on the tandem accelerator supported new initiatives in environmental research and management. The National Medical Cyclotron opens a new era in radiopharmaceutical research and development. Finally, the recently commissioned hot isostatic press provides a unique national resource for the development of new ceramics and their applications. The direction and priorities of Ansto's research program are determined through a combination of external and internal review. The Program Advisory Committees provide external evaluation against national objectives. New Committees have been formed and membership reflects the national and international nature of the ANSTO research programs. ills

Vectorization, parallelization and porting of nuclear codes (porting). Progress report fiscal 1999

Energy Technology Data Exchange (ETDEWEB)

Kawasaki, Nobuo; Nemoto, Toshiyuki; Kawai, Wataru; Ishizuki, Shigeru [Fujitsu Ltd., Tokyo (Japan); Ogasawara, Shinobu; Kume, Etsuo; Adachi, Masaaki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yatake, Yo-ichi [Hitachi Ltd., Tokyo (Japan)

2001-01-01

Several computer codes in the nuclear field have been vectorized, parallelized and transported on the FUJITSU VPP500 system, the AP3000 system, the SX-4 system and the Paragon system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. We dealt with 18 codes in fiscal 1999. These results are reported in 3 parts, i.e., the vectorization and the parallelization part on vector processors, the parallelization port on scalar processors and the porting part. In this report, we describe the porting. In this porting part, the porting of Assisted Model Building with Energy Refinement code version 5 (AMBER5), general purpose Monte Carlo codes far neutron and photon transport calculations based on continuous energy and multigroup methods (MVP/GMVP), automatic editing system for MCNP library code (autonj), neutron damage calculations for materials irradiations and neutron damage calculations for compounds code (SPECTER/SPECOMP), severe accident analysis code (MELCOR) and COolant Boiling in Rod Arrays, Two-Fluid code (COBRA-TF) on the VPP500 system and/or the AP3000 system are described. (author)

Trials for product's data management through RosettaNet using RosettaNet Technical Dictionary (RNTD) and Partner Interface Processes (PIP) 2A10

Energy Technology Data Exchange (ETDEWEB)

Shinya, H. [NEC Electronics Corp. (Japan); Katsumi, S. [Sony Corporation Corp. (Japan); Seigo, I. [Toshiba Corp. (Japan); Eita, I. [Fujitsu LTD. (Japan); Hisashi, F.; Mackin, J.W. [RosettaNet (Japan)

2004-07-01

We face a major challenge in identifying and tracking the amount of hazardous materials contained in electric and electronic products (EE) in accordance with various changing laws or customers' demands. Hence, the Material Composition Milestone Program (MatComp) was established in RosettaNet (USA) on Jan 2003. Many major electronics companies including NOKIA, Sony, NEC Electronics, Toshiba, Fujitsu, etc. are involved in the MatComp program. In addition, RosettaNet Japan has established an environmental information team to develop dictionaries for chemicals listed in the Joint Industry Guide (draft) which was published September, 2003. The RosettaNet RNTD and PIP 2A10 enable product material composition notification between trading partners. 2A10 allows us to describe the product in a hierarchical structure along with product itself in a method similar to IMDS's requirements. In this paper, we will demonstrate the advantage of using RosettaNet protocol for product data exchange between trading partners. Our goal is to complete a full-automated transaction to a design for environment (DfE). (orig.)

System for prediction of environmental emergency dose information network system

International Nuclear Information System (INIS)

Misawa, Makoto; Nagamori, Fumio

2009-01-01

In cases when an accident happens to arise with some risk for emission of a large amount radioactivity from the nuclear facilities, the environmental emergency due to this accident should be predicted rapidly and be informed immediately. The SPEEDI network system for such purpose was completed and now operated by Nuclear Safety Technology Center (NUSTEC) commissioned to do by Ministry of Education, Culture, Sports, Science and Technology, Japan. Fujitsu has been contributing to this project by developing the principal parts of the network performance, by introducing necessary servers, and also by keeping the network in good condition, such as with construction of the system followed by continuous operation and maintenance of the system. Real-time prediction of atmospheric diffusion of radionuclides for nuclear accidents in the world is now available with experimental verification for the real-time emergency response system. Improvement of worldwide version of the SPEEDI network system, accidental discharge of radionuclides with the function of simultaneous prediction for multiple domains and its evaluation is possible. (S. Ohno)

Huge-scale molecular dynamics simulation of multibubble nuclei

KAUST Repository

Watanabe, Hiroshi

2013-12-01

We have developed molecular dynamics codes for a short-range interaction potential that adopt both the flat-MPI and MPI/OpenMP hybrid parallelizations on the basis of a full domain decomposition strategy. Benchmark simulations involving up to 38.4 billion Lennard-Jones particles were performed on Fujitsu PRIMEHPC FX10, consisting of 4800 SPARC64 IXfx 1.848 GHz processors, at the Information Technology Center of the University of Tokyo, and a performance of 193 teraflops was achieved, which corresponds to a 17.0% execution efficiency. Cavitation processes were also simulated on PRIMEHPC FX10 and SGI Altix ICE 8400EX at the Institute of Solid State Physics of the University of Tokyo, which involved 1.45 billion and 22.9 million particles, respectively. Ostwald-like ripening was observed after the multibubble nuclei. Our results demonstrate that direct simulations of multiscale phenomena involving phase transitions from the atomic scale are possible and that the molecular dynamics method is a promising method that can be applied to petascale computers. © 2013 Elsevier B.V. All rights reserved.

Proceedings of workshop on 'future in HEP computing'

International Nuclear Information System (INIS)

Karita, Yukio; Amako, Katsuya; Watase, Yoshiyuki

1993-12-01

The workshop was held on March 11 and 12, 1993, at the National Laboratory for High Energy Physics (KEK). The large flow from the conventional system centering around large versatile computers to the down-sizing taking distributed processing systems in it is formed, but its destination is not yet seen. As the concrete themes of 'future in HEP computing', problems toward down-sizing and the approach, future perspective of the networks, and adaptation of software engineering and pointing to object were taken up. At the workshop, lectures were given on requirements in HEP computing, possible solutions from Hitachi and Fujitsu, and network computing with work-stations regarding down-sizing and HEP computing; approaches in INS and KEK regarding future computing system in HEP laboratories; user requirement for future network, network service available in 1995-2005, multi-media communication and network protocols regarding future networks; object-oriented approach for software development, OOP for real time data acquisition and accelerator control; ProdiG activities and future of FORTRAN, F90 and HPF regarding OOP and physics, and trends in software development methodology. (K.I.)

TU-PIS-Exhibit Hall-01: CT Dose Optimization Technologies II

International Nuclear Information System (INIS)

Driesser, I; Angel, E

2014-01-01

Partners in Solutions is an exciting new program in which AAPM partners with our vendors to present practical “hands-on” information about the equipment and software systems that we use in our clinics. The imaging topic this year is CT scanner dose optimization capabilities. Note that the sessions are being held in a special purpose room built on the Exhibit Hall Floor, to encourage further interaction with the vendors. Siemens‘ Commitment to the Right Dose in Computed Tomography Presentation Time: 11:15 - 11:45 AM Providing sustainable clinical results at highest patient safety: This is the challenge in medical imaging. Especially for Computed Tomography this means applying not simply the lowest, but the right dose for sound diagnostic imaging. Consequently, Siemens is committed to deliver the right dose in CT. In order to reduce radiation to the right dose, the first step is to provide the right dose technology. Through decades of research and development in CT imaging, Siemens CT has constantly introduced new ideas leading to a comprehensive portfolio of unique CARE technologies to deliver the right dose. For example automated kV adjustment based on patient size and the clinical question with CARE kV and three generations of iterative reconstruction. Based on the right dose technology, the next step is to actually scan at the right dose. For this, it is key to know the right dose targets for every examination. Siemens continuously involves CT experts to push developments further and outline how users can best adapt their procedures to the right dose. For users to know whether they met the right dose targets, it is therefore important to understand and monitor the actual absolute dose values. All scanners are delivered with defined default protocols which automatically use the available right dose technologies. Finally, to deliver the right dose not just in singular cases, but ideally to patients everywhere, organizations need then to manage dose across

Value of non-contrast CT examination of the urinary tract (stone ...

African Journals Online (AJOL)

Mohamed Samir Shaaban

2015-09-04

Sep 4, 2015 ... detection of abdominal pathologies other than stones, whether or not simulating the clinical picture of urolithiasis, and .... detector CT Siemens Somatom Sensation, with no oral or intravenous ..... of kidney stones in children.

76 FR 79224 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance...

Science.gov (United States)

2011-12-21

... Clariant Corp (Company)..... Martin, SC 11/29/11 11/29/11 81117 Sykes Enterprise Inc., Re: Grand Junction...). 81121 Third Degree Graphics & Ventura, CA 11/29/11 11/21/11 Marketing (Workers). 81122 Siemens Energy...

Three-dimensional hybrid networks based on aspartic acid

Indian Academy of Sciences (India)

WINTEC

Keywords. Aspartic acid; hybrid compounds; nickel aspartate; lead aspartate; achiral frameworks. ..... and coordinated to water molecules as well as car- .... (b) Dan M 2004 J. Mol. Struct. ... Sheldrick G M 1994 SADABS: Siemens area detector.

Tolmuimejaga üha mugavam koristada / Kirsti Herttua ja Ingrid Maasik

Index Scriptorium Estoniae

Herttua, Kirsti

2013-01-01

Testis tolmukotiga tolmuimejad hinnaklasis 160-250€: Electrolux Z8820B ; Hoover TPP2339 ; Miele S2181 ; Nilfisk Bravo Parquet ; Philips FC9170 ; Siemens VSQ4GP1268 ; Volta U6820R. Kommenteerib Kalle Kaljurahn

75 FR 15736 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2010-03-30

... Kansas City, MO....... 02/22/10 02/10/10 Pharmaceuticals (Comp). 73543 Bumble Bee Foods, LLC (Comp..., Siemens World Boise, ID 02/24/10 02/23/10 Travel (Wkrs). 73561 Musashi Auto Parts (State).. Battle Creek...

76 FR 22733 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance...

Science.gov (United States)

2011-04-22

...). 80090 Whitman Packaging Corp. Islandia, NY 04/06/11 03/31/11 (State/One-Stop). 80091 G&G Garments (State... Company (Company). 80099 Siemens Industry Inc. Bellefontaine, OH......... 04/08/11 04/08/11 (Workers). [FR...

a survey of computed tomography imaging techniques and patient

African Journals Online (AJOL)

2010-10-10

Oct 10, 2010 ... Atomic Energy Agency (IAEA), United Nations ... Siemens (48%), General Electric (29%) and Shimadzu. (4%). ... on the axis of rotation (z) multiplied by a conversion factor of ..... old generation CT scanners equipped with high.

TBT recommends : 5'nizza. German Quintet. The Devil's Bride

Index Scriptorium Estoniae

2007-01-01

Duo "5'nizza" 10. veebr. Tallinnas Café Amigos. Saksa kvintett The G-Strings ja läti jazzlaulja Intars Busulis 14. veebr. Läti Rahvusooperis. Muusikal "Velnio Nuotaka" ("The Devils Bride") 16. veebr. Vilniuses Siemens Arenal

Fuel cell propulsion for urban duty vehicles: Bavarian fuel cell bus project

International Nuclear Information System (INIS)

Wurster, R.; Altmann, M.; Sillat, D.; Kalk, K. W.; Hammerschmidt, A.; Stuehler, W.; Holl, E.

1998-01-01

Following a feasibility study and a detailed specification phase, the realization of a fuel cell city bus prototype was started in autumn 1996. The project is a joint development effort of Siemens, MAN and Linde, which receives a 50 % funding by the Bavarian State Ministry for Economic Affairs, Transport and Technology (BStMWVT) in the context of the Hydrogen Initiative Bavaria. An MAN low-floor bus will be equipped with the components for a fuel cell drive system. The PEM fuel cell is developed by the power generation division of Siemens. Four fuel cell modules deliver a total electrical output of 120 kW to the two electric motors, which are linked by a summation gearbox by the Siemens Transportation Systems Division. MAN Technologie AG is responsible for the compressed hydrogen storage system allowing for a driving range of more than 250 km, while Linde AG takes care of the hydrogen periphery and delivers the hydrogen for the test operation scheduled for the beginning of the year 2000. Project coordination is done by Ludwig-Boelkow System-technik GmbH. The project is divided into four phases. The conceptual design phase is scheduled to last until the end of 1997. The partly overlapping system integration phase will end in the first quarter of 1999. The subsequent test and commissioning phase will prepare the test operation at the beginning of 2000 with a bus operator yet to be defined. (author)

Radiation protection and monitoring

International Nuclear Information System (INIS)

Bruecher, L.; Langmueller, G.; Tuerschmann, G.

1997-01-01

The safety, the quality and efficiency of the radiological monitoring systems for block one and two of the NPP Mochovce, designed and delivered by the general designer, should be increased by EUCOM Siemens. Modern, accident resistant and/or more powerful monitoring systems have been designed by Siemens will be added to the existing systems. To achieve this radiation measuring units will be installed inside the hermetic zone, in the reactor hall, at the stack, at the release water system and in the environment in the vicinity of the NPP. The presentation, the storage distribution and the processing of all measuring results also will be optimised by installing a modern high-performance computer system, the so-called Central Radiological Computer System 'CRCS', featuring a high availability. The components will be installed in the relevant control rooms all over the plant. With this computer system it is easy to control the radiation level inside and outside the NPP during normal operation and during and after an accident. Special programs, developed by Siemens support the staff by interpreting the consequences of radioactive releases into the environment and by initiating protection procedures during and after an accident. All functions of the system are available for emergency protection drills and training the staff interruption of the normal control procedure. For the personal protection a digital personal dosimetry system completely considering with the requirements of ICRP 60 and several contamination monitors will be installed. (authors)

Annual report 2000

International Nuclear Information System (INIS)

2001-01-01

This report presents the industrial activities and the financial results of the Framatome group (Framatome-SA) in 2000. and Siemens have merged their nuclear activities and have created Framatome-ANP (advanced nuclear power) owned by Framatome (66%) and Siemens (34%). This new society represents a turnover of 3 millions Euros and a staff of 13.000 employees. In the sector of connectors, FCI (Framatome Connectors International) has reinforced its second position in the world, FCI has enjoyed a high growth in the sector of telecommunication and has created a department dealing with optic fibers. 32% of the activities of Framatome-SA have been performed in France, 26% in North America and 42% in the rest of the world. In 2000 the trading results after having paid taxes reached 306 millions Euros, it represents 6.1% of the turnover. (A.C.)

Clinical validation of an in-house EPID dosimetry system for IMRT QA at the Prince of Wales Hospital

Science.gov (United States)

Tyler, M.; Vial, P.; Metcalfe, P.; Downes, S.

2013-06-01

In this study a simple method using standard flood-field corrected Electronic Portal Imaging Device (EPID) images for routine Intensity Modulated Radiation Therapy (IMRT) Quality Assurance (QA) was investigated. The EPID QA system was designed and tested on a Siemens Oncor Impression linear accelerator with an OptiVue 1000ST EPID panel (Siemens Medical Solutions USA, Inc, USA) and an Elekta Axesse linear accelerator with an iViewGT EPID (Elekta AB, Sweden) for 6 and 10 MV IMRT fields with Step-and-Shoot and dynamic-MLC delivery. Two different planning systems were used for patient IMRT field generation for comparison with the measured EPID fluences. All measured IMRT plans had >95% agreement to the planning fluences (using 3 cGy / 3 mm Gamma Criteria) and were comparable to the pass-rates calculated using a 2-D diode array dosimeter.

Milestones in screen-based process control

International Nuclear Information System (INIS)

Guesnier, G.P.

1995-01-01

The German approach is based on the utilisation of the conceptual elements of the PRISCA information system developed by Siemens and on operational experience with screen-based process control in a conventional power plant. In the French approach, the screen-based control room for the N4 plants, designed from scratch, has undergone extensive simulator tests for validation before going into realisation. It is now used in the commissioning phase of the first N4 plants. The design of the control room for the European Pressurized Water Reactor will be based on the common experience of Siemens and Electricite de France. Its main elements are several separate operator workstations, a safety control area used as a back-up for postulated failures of the workstations, and a commonly utilisable plant overview for the operators' coordination. (orig./HP) [de

Caso para diagnóstico Case for diagnosis

Directory of Open Access Journals (Sweden)

Isabella Brasil Succi

2009-04-01

Full Text Available A síndrome de Christ-Siemens-Touraine (displasia ectodérmica hipoidrótica é uma síndrome rara, caracterizada pela tríade de sudorese reduzida ou ausente, hipotricose e dentição defeituosa. Bossas frontais proeminentes, nariz em sela, lábio inferior espesso e queixo pontudo fazem com que os pacientes tenham uma fácies característica e semelhante. A síndrome completa ocorre em homens, visto tratar-se de herança recessiva ligada ao X.Christ-Siemens-Touraine syndrome (hypohidrotic ectodermal dysplasia is a rare syndrome characterized by the triad of absent or reduced sweating, hypotrichosis, and defective dentition. The prominent forehead, saddle nose, thick lower lip and pointy chin produce a distinctive facies. The full syndrome only occurs in men as it is an X-linked recessive condition.

Areva - 2008 results: yet another year of growth for AREVA

International Nuclear Information System (INIS)

2009-02-01

This paper summarizes the 2008 financial results of the Areva group: Backlog: 48.2 billion euros, up 21.1%; Revenue: 13.2 billion euros, up 10.4%; Operating income: - Operating income excluding provision on OL3 contract in Finland: 1,166 million euros, i.e. operating margin of 8.9%; - Additional provision on OL3 contract of 749 million euros; - Operating income: 417 million euros, i.e. operating margin of 3.2%. Net income attributable to equity holders of the parent: 589 million euros, i.e. euros 16.62 per share; Net debt of 3.45 billion euros before recognition of the SIEMENS put; Dividend of euros 7.05 to be proposed during the Annual General Meeting of Shareholders of April 30, 2009. After publication of these figures Siemens announced its decision to withdraw from AREVA NP

Walter Schottky. Atom-theorist and electrotechnician. His life and work until the year 1941; Walter Schottky. Atomtheoretiker und Elektrotechniker. Sein Leben und Werk bis ins Jahr 1941

Energy Technology Data Exchange (ETDEWEB)

Serchinger, Reinhard W.

2008-07-01

In this first scientific biography of Walter Schottky at the one hand the origin of his scientific and technical works is reproduced and put in the physical-historical connection of his time. At the other hand his special role in the research strategy of the Siemens company becomes clear, which could in the framework of this research project for the first time be identified. Also psychological aspects were essentially included in the study, because else the binding of the particular more corresponding to an ivory-tower than and industrial physicist personality of Schottky to the Siemens trust not would be understandable. The example of Walter Schottky shows the importance of the researching individuum, which until today undoubtly can be an important element of company-internal innovation processes not only contrarily but also in the transition to scientific team work.

Clinical validation of an in-house EPID dosimetry system for IMRT QA at the Prince of Wales Hospital

International Nuclear Information System (INIS)

Tyler, M; Downes, S; Vial, P; Metcalfe, P

2013-01-01

In this study a simple method using standard flood-field corrected Electronic Portal Imaging Device (EPID) images for routine Intensity Modulated Radiation Therapy (IMRT) Quality Assurance (QA) was investigated. The EPID QA system was designed and tested on a Siemens Oncor Impression linear accelerator with an OptiVue 1000ST EPID panel (Siemens Medical Solutions USA, Inc, USA) and an Elekta Axesse linear accelerator with an iViewGT EPID (Elekta AB, Sweden) for 6 and 10 MV IMRT fields with Step-and-Shoot and dynamic-MLC delivery. Two different planning systems were used for patient IMRT field generation for comparison with the measured EPID fluences. All measured IMRT plans had >95% agreement to the planning fluences (using 3 cGy / 3 mm Gamma Criteria) and were comparable to the pass-rates calculated using a 2-D diode array dosimeter.

Advanced non-destructive methods for an efficient service performance

International Nuclear Information System (INIS)

Rauschenbach, H.; Clossen-von Lanken Schulz, M.; Oberlin, R.

2015-01-01

Due to the power generation industry's desire to decrease outage time and extend inspection intervals for highly stressed turbine parts, advanced and reliable Non-destructive methods were developed by Siemens Non-destructive laboratory. Effective outage performance requires the optimized planning of all outage activities as well as modern Non-destructive examination methods, in order to examine the highly stressed components (turbine rotor, casings, valves, generator rotor) reliably and in short periods of access. This paper describes the experience of Siemens Energy with an ultrasonic Phased Array inspection technique for the inspection of radial entry pinned turbine blade roots. The developed inspection technique allows the ultrasonic inspection of steam turbine blades without blade removal. Furthermore advanced Non-destructive examination methods for joint bolts will be described, which offer a significant reduction of outage duration in comparison to conventional inspection techniques. (authors)

Areva - 2008 results: yet another year of growth for AREVA; Areva - Resultats 2008: une nouvelle annee de croissance pour AREVA

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-02-15

This paper summarizes the 2008 financial results of the Areva group: Backlog: 48.2 billion euros, up 21.1%; Revenue: 13.2 billion euros, up 10.4%; Operating income: - Operating income excluding provision on OL3 contract in Finland: 1,166 million euros, i.e. operating margin of 8.9%; - Additional provision on OL3 contract of 749 million euros; - Operating income: 417 million euros, i.e. operating margin of 3.2%. Net income attributable to equity holders of the parent: 589 million euros, i.e. euros 16.62 per share; Net debt of 3.45 billion euros before recognition of the SIEMENS put; Dividend of euros 7.05 to be proposed during the Annual General Meeting of Shareholders of April 30, 2009. After publication of these figures Siemens announced its decision to withdraw from AREVA NP.

Investigation of the prospective use of the Eco-Care-Matrix

DEFF Research Database (Denmark)

Skelton, Kristen

A variety of different environmental assessment tools have been developed and used by companies over recent years in order to assess and communicate product related environmental impacts. One example is the Eco-Care-Matrix (ECM) which was developed by Siemens AG, using life cycle assessment (LCA......) and life cycle cost (LCC) methodologies, in order to assess the environmental and economic effectiveness between two product or technology designs.It can be stated that from a methodological perspective, much attention and effort has been given to develop the ECM methodology but less attention has been...... given to its application in an organizations and its effectiveness from a user (designer) perspective. A pilot project investigating the prospective application and use of the ECM in the Wind Power and Renewables division of Siemens AG was recently conducted to assess this claim. Feedback was gathered...

Annual report 2000; Rapport annuel 2000

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This report presents the industrial activities and the financial results of the Framatome group (Framatome-SA) in 2000. and Siemens have merged their nuclear activities and have created Framatome-ANP (advanced nuclear power) owned by Framatome (66%) and Siemens (34%). This new society represents a turnover of 3 millions Euros and a staff of 13.000 employees. In the sector of connectors, FCI (Framatome Connectors International) has reinforced its second position in the world, FCI has enjoyed a high growth in the sector of telecommunication and has created a department dealing with optic fibers. 32% of the activities of Framatome-SA have been performed in France, 26% in North America and 42% in the rest of the world. In 2000 the trading results after having paid taxes reached 306 millions Euros, it represents 6.1% of the turnover. (A.C.)

Computed tomography of head: impact of the use of automatic exposure control

International Nuclear Information System (INIS)

Souza, Giordana Salvi de Souza; Froner, Ana Paula Pastre; Silva, Ana Maria Marques da

2017-01-01

The use of dose reduction systems in computed tomography is particularly important for pediatric patients, who have a high radiosensitivity, since they are in the growing phase. The aim of this study was to evaluate the impact of Siemens AEC Care Dose system use on dose estimation in head computed tomography scans in pediatric patients. A retrospective study was conducted with 199 computed tomography head scans of pediatric patients, divided in different age groups, on a 16-channel Siemens Emotion scanner. It was possible to observe, for all age groups, that the use of AEC Care Dose system, not only reduced CTDI vol , but also the interquartile range, reducing the total dose in the investigated population. Concluding, AEC Care Dose system models the tube current according to the patient's dimensions, reducing individual and collective dose without affecting the diagnostic quality . (author)

Desain Sistem Kontrol Traffic Light Adaptif Pada Persimpangan Empat Berbasis PLC Siemens

Directory of Open Access Journals (Sweden)

Zulfikar

2015-03-01

Full Text Available Nowadays, traffic lights are using a fixed time as on-off light signal controller. However this system has many disadveantages, such as vehicles have to queue long time in certain road section (lane at rush hour. As a consequence, it reguires a traffic light control system that can prioritize a more dense lane. Adaptive traffic light control detects the number of queues of vehicles on the lane. Sensors detect the vehicle queue’s length. There are three sensors that will detect queues’s length of vehicles on each lane. When the queue of vehicles reached the first sensor, the green light will be on longer 5 seconds compare to the normal traffic. When the queue of vehicles reaches the second sensor, the green light provide 10 seconds more compare to the normal traffic and if the queue of vehicles reaches the third sensor, the green light will be longer which is about 20 seconds compare. In this adaptive traffic light control system, there are two jam sensors installed in the middle of the intersection that will turn on all the red lights when there is an unexpected problems happened. This adaptive traffic light control system will provide the longest queuing time 92 seconds, when all sensors on all lanes active and the fastest time is 47 seconds which is the time when the normal system.

Stability of BUN and creatinine determinations on the Siemens Advia 1800 analyzer.

Science.gov (United States)

Qin, Jia; Wang, Huiying; Rets, Anton; Harari, Saul; Alexis, Herol; Eid, Ikram; Pincus, Matthew R

2013-11-01

Serum creatinine values of patients tend to change as a result of the use of different blanks used for creatinine determinations on the Advia 1650. After upgrading the analyzer to the Advia 1800, creatinine values tended to be more reproducible. As part of a quality assurance investigation to test the reproducibilities of creatinine values, we determined serial creatinine values in the sera of 13 patients whose initial values were either in the reference range or elevated (range 0.58-7.8 mg/dl). These values were determined concurrently with serum blood urea nitrogen (BUN) determinations (range 6.0-84.4 mg/dl) as these two analytes are used together in evaluation of renal function. We determined BUN and creatinine values, using the glutamate dehydrogenase lined enzyme assay system and the Jaffe method, respectively. We find that all values for creatinine on samples stored at 4 °C were reproducible as were the corresponding BUN values, which is revealed by low values for the coefficients of variation (CVs), that is, mean CV of 4.55% for creatinine and 2.52% for BUN. One sample with relatively high CV (10.6%) for creatinine was found to have an initial value of 1.1 mg/dl, in the reference range; but, on repeat determinations, the obtained levels were as high as 1.5 mg/dl, above the reference range. BUN values for this sample remained in the reference range, suggesting that no renal disease was present. We conclude that creatinine and BUN determinations are stable, but occasional spurious creatinine values can occur on the Advia 1800 analyzer. © 2013 Wiley Periodicals, Inc.

Testing time for Siemens/KWU's PRINS/PRISCA at Isar II and Emsland

International Nuclear Information System (INIS)

Aleite, W.

1988-01-01

The culmination of work started in the early 1970s, the first PRINS/PRISCA process information system has recently been through commissioning tests at the new Isar II and Emsland convoy PWRS. PRINS/PRISCA is a human factor orientated, fully redundant, distributed, real time computer system with full graphic capabilities and standardized pictorial symbols. It also features elements of artificial intelligence and an innovative presentation of information, using banks of up to eight screens. KWU reports that reactions from operators have been increasingly positive. (author)

Kõige tähtsam eestlane Nokia peakontoris / Raigo Neudorf

Index Scriptorium Estoniae

Neudorf, Raigo

2008-01-01

Eestlane Margus Hunt vastutab Nokia Siemens Networksi müügi eest Soomes ja Baltimaades. Vt. samas: Eestlased on uutele tehnoloogiatele avatud; Ollila lahkumine märki ei jätnud; Hunt aitas olümpiamänge korraldada

Dataset-driven research for improving recommender systems for learning

NARCIS (Netherlands)

Verbert, Katrien; Drachsler, Hendrik; Manouselis, Nikos; Wolpers, Martin; Vuorikari, Riina; Duval, Erik

2011-01-01

Verbert, K., Drachsler, H., Manouselis, N., Wolpers, M., Vuorikari, R., & Duval, E. (2011). Dataset-driven research for improving recommender systems for learning. In Ph. Long, & G. Siemens (Eds.), Proceedings of 1st International Conference Learning Analytics & Knowledge (pp. 44-53). February,

NPP Mochovce - a project of extraordinay significance

International Nuclear Information System (INIS)

Chwolik, I.; Debru, M.

2000-01-01

In this paper and in this presentation the reactor safety upgrading of two blocks of the NPP V-1 Bohunice, some results of participation on safety upgrading by the German-French consortium EUCOM (Framatome and Siemens-KWU) are presented. (author)

76 FR 61742 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and...

Science.gov (United States)

2011-10-05

...: August 1, 2010 TA-W-80,353; The HON Company, Owensboro, KY: August 4, 2011 TA-W-80,393; SOLON Corp... workers cannot be covered by more than one certification at a time. TA-W-80,328; Siemens Medical Solutions...

What Learning Analytics‐Based Prediction Models Tell Us About Feedback Preferences of Students

NARCIS (Netherlands)

Nguyen, Quan; Tempelaar, Dirk; Rienties, Bart; Giesbers, Bas

2016-01-01

Learning analytics seeks to enhance learning processes through systematic measurements of learning-related data and to provide informative feedback to learners and educators (Siemens & Long, 2011). This study examined the use of preferred feedback modes in students by using a dispositional

Evaluation of the technical performance of three different commercial digital breast tomosynthesis systems in the clinical environment

NARCIS (Netherlands)

Rodriguez Ruiz, A.; Castillo, M.; Garayoa, J.; Chevalier, M.

2016-01-01

The aim of this work was to research and evaluate the performance of three different digital breast tomosynthesis (DBT) systems in the clinical environment (Siemens Mammomat Inspiration, Hologic Selenia Dimensions, and Fujifilm Amulet Innovality). The characterization included the study of the

Combined-cycle plants

International Nuclear Information System (INIS)

Valenti, M.

1991-01-01

This paper reports that as tougher emissions standards take hold throughout the industrialized world, manufacturers such as GE, Siemens, Foster Wheeler, and Asea Brown Boveri are designing advanced combined-cycle equipment that offers improved environmental performance without sacrificing power efficiency

Future reactors cheaper than GUD systems

International Nuclear Information System (INIS)

Koenig, N.

1999-01-01

How does Siemens/KWU, as one of the leading manufacturers of generating stations, react to the competition among the EVU enforced by liberalisation of the energy markets, and what are the future prospects for nuclear power stations within this area? Since short-term minimisation of production costs and reduction of investments risks now have absolute priority among energy suppliers, Siemens assumes that the boom already to be observed with gas-fired GUD generating stations will continue. A further result of this fierce competition will be the ousting of smaller suppliers, and expensive plant technology. Existing generating stations, even though they may not meet the latest environmental standards, will remain in operation longer than originally planned. Investments to prolong service life and to reduce costs will be given priority. In the case of generating stations using fossil fuels, operators will make every effort to increase efficiency. In all probability, nuclear energy will not in every case represent a first choice in markets governed by considerations of competition. For existing nuclear power stations in Germany, however, Siemens foresees very good competitive opportunities even under the new overall conditions. In the case of nuclear power stations which are mostly, or even entirely amortised, only the operating costs occasioned by the fuel position are of importance for the generating costs. These, however, are lower than current gas prices. Moreover, operators are more concerned than previously to exploit existing potentials for cost reduction. The example of the British nuclear power stations reveals that, under the pressure of competition, these have increased their productivity by 100 per cent since 1994, so that the operating profit increased by 300 per cent. For new nuclear power station development, therefore, a decisive criterion, in the opinion of the author, is that these should be competive even compared with GUD stations. This is true of the

Dependence of Achievable Plan Quality on Treatment Technique and Planning Goal Refinement: A Head-and-Neck Intensity Modulated Radiation Therapy Application

International Nuclear Information System (INIS)

Qi, X. Sharon; Ruan, Dan; Lee, Steve P.; Pham, Andrew; Kupelian, Patrick; Low, Daniel A.; Steinberg, Michael; Demarco, John

2015-01-01

Purpose: To develop a practical workflow for retrospectively analyzing target and normal tissue dose–volume endpoints for various intensity modulated radiation therapy (IMRT) delivery techniques; to develop technique-specific planning goals to improve plan consistency and quality when feasible. Methods and Materials: A total of 165 consecutive head-and-neck patients from our patient registry were selected and retrospectively analyzed. All IMRT plans were generated using the same dose–volume guidelines for TomoTherapy (Tomo, Accuray), TrueBeam (TB, Varian) using fixed-field IMRT (TB-IMRT) or RAPIDARC (TB-RAPIDARC), or Siemens Oncor (Siemens-IMRT, Siemens). A MATLAB-based dose–volume extraction and analysis tool was developed to export dosimetric endpoints for each patient. With a fair stratification of patient cohort, the variation of achieved dosimetric endpoints was analyzed among different treatment techniques. Upon identification of statistically significant variations, technique-specific planning goals were derived from dynamically accumulated institutional data. Results: Retrospective analysis showed that although all techniques yielded comparable target coverage, the doses to the critical structures differed. The maximum cord doses were 34.1 ± 2.6, 42.7 ± 2.1, 43.3 ± 2.0, and 45.1 ± 1.6 Gy for Tomo, TB-IMRT, TB-RAPIDARC, and Siemens-IMRT plans, respectively. Analyses of variance showed significant differences for the maximum cord doses but no significant differences for other selected structures among the investigated IMRT delivery techniques. Subsequently, a refined technique-specific dose–volume guideline for maximum cord dose was derived at a confidence level of 95%. The dosimetric plans that failed the refined technique-specific planning goals were reoptimized according to the refined constraints. We observed better cord sparing with minimal variations for the target coverage and other organ at risk sparing for the Tomo cases, and higher

Safety issues on advanced fuel

Energy Technology Data Exchange (ETDEWEB)

Gross, H.; Krebs, W.D. [Siemens AG, Bereich Energieerzeugug (KWU), Erlangen (Germany). Geschaeftsgebiet Nukleare Energieerzeugung

1998-05-01

In the recent years a general discussion has started whether unsolved safety issues are related to advanced fuel. Advanced fuel is in this context a summary of features like high burnup, improved clad materials, low leakage loading pattern with high peaking factors etc. The design basis accidents RIA and Loca are of special interest for this discussion. From the Siemens point of view RIA is not a safety issue. There are sufficient margins between the enthalpy rise calculated by modern 3D methods and the fuel failures which occurred in RIA simulation tests when the effect of pulse width is taken into account. The evaluation of possible uncertainties for the established Loca criteria (17% equivalent corrosion, 1200 C clad temperature) for high burnup makes sense. But fuel with high burnup has significantly lower peaking factors than fuel with lower burnup. This gives sufficient margin counterbalancing possible uncertainties. In contrast to the above incomplete control rod insertion at higher burnup is potentially a real safety issue. Although Siemens fuel was not affected by the reported incidents they addressed the problem and checked that they have sufficient design margin for their fuel. (orig.) [Deutsch] In den letzten Jahren hat eine allgemeine Diskussion begonnen, ob mit fortgeschrittenen Brennelementen (BE) ungeklaerte Sicherheitsprobleme verbunden sind. Dabei ist `Fortgeschrittene Brennelemente` ein Sammelbegriff fuer hohe Abbraende, verbesserte Huellrohrmaterialien, Low-leakage-Einsatzplanungen mit hohen Heissstellenfaktoren usw. Die Auslegungsstoerfaelle RIA und Loca sind in dieser Diskussion von besonderer Bedeutung. Aus der Sicht von Siemens ist der RIA kein Sicherheitsproblem. Zwischen den mit modernen 3D-Methoden berechneten Enthalpieerhoehungen und den in RIA-Experimenten aufgetretenen Brennstabdefekten bestehen ausreichende Abstaende, wenn der Einfluss der Pulsbreite beruecksichtigt wird. Die Untersuchung eventueller Unsicherheiten bei hohen

Measurements of dose on build-up region, surface dose and outlet dose by a 10 MeV Linear accelerator

International Nuclear Information System (INIS)

Souza, C.N. de; Khoury, H.J.

1987-01-01

The dose on buildup region and the surface dose for a 10 MeV photon beam from a linear acelerator (Mevatrom-74, Siemens) is studied. The influence of the tray of polycarbonate on the surface dose is determined. (M.A.C.) [pt

Spatial resolution of the HRRT PET scanner using 3D-OSEM PSF reconstruction

DEFF Research Database (Denmark)

Olesen, Oline Vinter; Sibomana, Merence; Keller, Sune Høgild

2009-01-01

The spatial resolution of the Siemens High Resolution Research Tomograph (HRRT) dedicated brain PET scanner installed at Copenhagen University Hospital (Rigshospitalet) was measured using a point-source phantom with high statistics. Further, it was demonstrated how the newly developed 3D-OSEM PSF...

78 FR 70584 - ATOS IT Solutions & Services, Inc., Billing and Collections Department, Including Workers Whose...

Science.gov (United States)

2013-11-26

...) Wages are Reported Through Siemens IT Solutions and Services, Mason, Ohio; Amended Certification... Solutions & Services, Inc., Billing and Collections Department, Mason, Ohio. The workers are engaged in... workers separated from employment at the Mason, Ohio location of ATOS IT Solutions & Services, Inc...

76 FR 50269 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2011-08-12

..., Inc., Global Services/Supply Chain Management, Malvern, PA In accordance with Section 223 of the Trade... Department is amending the certification to include workers of the Global Services/Supply Chain Management.../Supply Chain Management, Malvern, Pennsylvania, provided support to several Siemens facilities, including...

Model Oriented Application Generation for Industrial Control Systems

CERN Document Server

Copy, B; Blanco Vinuela, E; Fernandez Adiego, B; Nogueira Ferandes, R; Prieto Barreiro, I

2011-01-01

The CERN Unified Industrial Control Systems framework (UNICOS) is a software generation methodology and a collection of development tools that standardizes the design of industrial control applications [1]. A Software Factory, named the UNICOS Application Builder (UAB) [2], was introduced to ease extensibility and maintenance of the framework, introducing a stable metamodel, a set of platformindependent models and platformspecific configurations against which code generation plugins and configuration generation plugins can be written. Such plugins currently target PLC programming environments (Schneider and SIEMENS PLCs) as well as SIEMENS WinCC Open Architecture SCADA (previously known as ETM PVSS) but are being expanded to cover more and more aspects of process control systems. We present what constitutes the UNICOS metamodel and the models in use, how these models can be used to capture knowledge about industrial control systems and how this knowledge can be leveraged to generate both code and configuratio...

Divertor cassette movers prototypes for ITER

International Nuclear Information System (INIS)

Bogusch, E.; Batz, R.; Bieber, O.; Gottfried, R.; Cerdan, G.

1998-01-01

Following competitive tendering, in October 1996 Siemens was contracted by the European Commission to design and supply an assembly of four Divertor Cassette Movers Prototypes including the control and command systems for the movers proper. The assembly consisting of one Cassette Toroidal Mover (CTM), one Radial Mover Tractor (TRC), one Second Cassette Carrier (SCC), and one Radial Cassette Carrier (RCC) represents key components of the Divertor Test Platform at Brasimone, one of the seven large R+D projects for ITER. By detailed design, high-precision manufacturing and testing of these devices, Siemens contributed to the verification of an important task within the European R and D program towards ITER construction. Replacement of the divertor cassettes is a scheduled maintenance operation throughout the life of ITER. The successful fabrication and testing of the Divertor Cassette Movers Prototypes is all important milestone to verify this delicate operation. (authors)

Computed tomography of head: impact of the use of automatic exposure control; Doses em tomografia computadorizada de crânio: impacto do uso do controle automático de exposição

Energy Technology Data Exchange (ETDEWEB)

Souza, Giordana Salvi de Souza; Froner, Ana Paula Pastre; Silva, Ana Maria Marques da, E-mail: giordana.souza@acad.pucrs.br [Pontificia Universidade catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil). Núcleo de Pesquisa em Imagens Médicas

2017-07-01

The use of dose reduction systems in computed tomography is particularly important for pediatric patients, who have a high radiosensitivity, since they are in the growing phase. The aim of this study was to evaluate the impact of Siemens AEC Care Dose system use on dose estimation in head computed tomography scans in pediatric patients. A retrospective study was conducted with 199 computed tomography head scans of pediatric patients, divided in different age groups, on a 16-channel Siemens Emotion scanner. It was possible to observe, for all age groups, that the use of AEC Care Dose system, not only reduced CTDI{sub vol}, but also the interquartile range, reducing the total dose in the investigated population. Concluding, AEC Care Dose system models the tube current according to the patient's dimensions, reducing individual and collective dose without affecting the diagnostic quality . (author)

PHYSICOCHEMICAL PROPERTIES OF THE SOLID COMPONENT OF WELDING AEROSOL. I. PHASE COMPOSITION

Directory of Open Access Journals (Sweden)

T. L. Rakitskaya

2015-02-01

Full Text Available The phase composition of the solid component of welding aerosol (SCWA obtained as a result of metal welding with electrodes of ANO-4 and TsL-11 types manufactured according to ISO 2560 E432R 21 and ISO E19.9NbB20 standards, respectively, and differing in com-position of their wires and coatings was determined with the help of a Siemens D500 diffrac- a Siemens D500 diffrac-tometer supplied with the manufacturer’s software. Four and thirteen phases were identified in SCWA-ANO-4 and SCWA-TsL-11, respectively. Evaluation of crystallite sizes by the use of the Scherer equation showed that the crystallites formed in the course of welding with a TsL-11 type electrode are larger than those in the case of an ANO-4 type one: 65-89 nm and 30-49 nm, respectively.

Monte Carlo simulation of a medical linear accelerator for radiotherapy use

International Nuclear Information System (INIS)

Serrano, B.; Hachem, A.; Franchisseur, E.; Herault, J.; Marcie, S.; Costa, A.; Bensadoun, R. J.; Barthe, J.; Gerard, J. P.

2006-01-01

A Monte Carlo code MCNPX (Monte Carlo N-particle) was used to model a 25 MV photon beam from a PRIMUS (KD2-Siemens) medical linear electron accelerator at the Centre Antoine Lacassagne in Nice. The entire geometry including the accelerator head and the water phantom was simulated to calculate the dose profile and the relative depth-dose distribution. The measurements were done using an ionisation chamber in water for different square field ranges. The first results show that the mean electron beam energy is not 19 MeV as mentioned by Siemens. The adjustment between the Monte Carlo calculated and measured data is obtained when the mean electron beam energy is ∼15 MeV. These encouraging results will permit to check calculation data given by the treatment planning system, especially for small fields in high gradient heterogeneous zones, typical for intensity modulated radiation therapy technique. (authors)

Gas enhanced magnetic resonance angiography of the cerebrum using carbon dioxide and oxygen - preliminary results

DEFF Research Database (Denmark)

Pedersen, Mads Møller; Hansen, Kristoffer Lindskov; Ohlhues, Anders

Purpose/introduction Standard imaging of the cerebral arteries is performed using intravenous contrast in CT angiography and x-ray angiography. Magnetic resonance angiography (MRA) of the cerebral arteries using intravenous contrast media does not perform well. Contrast in the venous bed...... and Methods Two healthy volunteers were scanned during inhalation of three different gas mixtures: Gas I (air), Gas II (5% CO2, 21 % O2, 74 % N2), Gas III (5% CO2, 95% O2). For each gas mixture a time of flight (TOF) series on the cerebral arteries was performed. Following each TOF series an ECG-gated phase...... contrast sequence was performed to calculate volume flow in the common carotid arteries. MRA data was acquired with a 1.5 T Siemens VISION MR-system (SIEMENS Medical Systems, Germany) using a standard circularly polarized head coil. Reconstructed images of TOF series and volume flow measurements were...

Practical radiography. 11. ed.

International Nuclear Information System (INIS)

Hoxter, E.A.

1982-01-01

After a brief explanation of the basics of electricity, the fundamentals of radiography are dealt with in more detail - the discovery of X-rays, their nature and properties, the production of the X-ray image and ways of improving the image. A chapter is devoted to the important subject of radiation protection. Explanations are given of the use of the Siemens exposure tables, which make it simpler to modify exposures from the values given in the tables. There is also a section on some of the standard radiographic positioning for patients. The most common medical terms used in radiography and fluoroscopy are listed and an Appendix gives details of the major items of Siemens X-ray equipment. There is a list of literature recommended for further study. Theoretical explanations have been kept to a minimum so that information that is important to radiography can be emphasized. (orig./MG)

Study of optimization in CR and DR digital mammography systems; Estudo da otimização em sistemas de mamografia digital CR e DR

Energy Technology Data Exchange (ETDEWEB)

Perez, Alessandra M.M.M.; Poletti, Martin E. [Universidade de Sao Paulo (USP), Ribeirão Preto, SP (Brazil). Departamento de Física; Tomal, Alessandra [Universidade de Campinas (UNICAMP), Campinas, SP (Brazil). Instituto de Física Gleb Wataghin; Correia, Paula D. [MP Radioproteção, Uberlândia, MG (Brazil); Paciência, Renato D. [BrasilRad, Florianópolis, SC (Brazil); Silva, Marcia C. [Hospital Israelita Albert Einstein, São Paulo, SP (Brazil)

2017-07-01

The advance of digital mammography in Brazil require revisiting optimization conditions. This work aimed to determine optimized radiographic technique for two detection systems (Computerized Radiography and Digital Radiography) in use in three mammography units: Mammomat 3000 Nova (Siemens), Senographe DMR (GE) and Senographe 2000D (GE). Optimization was conducted for different technique factors and breast phantom configurations, such as tube voltage settings (26 to 32 kV), target and filter combinations (Mo/Mo, Mo/Rh and Rh/Rh) and breast equivalent material in various thicknesses (2 to 8 cm), using a figure of merit (FOM) as a parameter. The target and filter combinations that provided the highest FOM values were Mo/Rh for Siemens equipment and Rh/Rh for both GE equipment, corresponding to the higher energy spectra in each unity. It was also observed an increasing tendency of tube voltage which maximizes FOM with the increase of thickness. (author)

Development of an integrated, unattended assay system for LWR-MOX fuel pellet trays

International Nuclear Information System (INIS)

Stewart, J.E.; Hatcher, C.R.; Pollat, L.L.

1994-01-01

Four identical unattended plutonium assay systems have been developed for use at the new light-water-reactor mixed oxide (LWR-MOX) fuel fabrication facility at Hanau, Germany. The systems provide quantitative plutonium verification for all MOX pellet trays entering or leaving a large, intermediate store. Pellet-tray transport and storage systems are highly automated. Data from the ''I-Point'' (information point) assay systems will be shared by the Euratom and International Atomic Energy Agency (IAEA) Inspectorates. The I-Point system integrates, for the first time, passive neutron coincidence counting (NCC) with electro-mechanical sensing (EMS) in unattended mode. Also, provisions have been made for adding high-resolution gamma spectroscopy. The system accumulates data for every tray entering or leaving the store between inspector visits. During an inspection, data are analyzed and compared with operator declarations for the previous inspection period, nominally one month. Specification of the I-point system resulted from a collaboration between the IAEA, Euratom, Siemens, and Los Alamos. Hardware was developed by Siemens and Los Alamos through a bilateral agreement between the German Federal Ministry of Research and Technology (BMFT) and the US DOE. Siemens also provided the EMS subsystem, including software. Through the USSupport Program to the IAEA, Los Alamos developed the NCC software (NCC COLLECT) and also the software for merging and reviewing the EMS and NCC data (MERGE/REVIEW). This paper describes the overall I-Point system, but emphasizes the NCC subsystem, along with the NCC COLLECT and MERGE/REVIEW codes. We also summarize comprehensive testing results that define the quality of assay performance

Implementation of PID autotuning procedure in PLC controller

Directory of Open Access Journals (Sweden)

Daniun Marcin

2017-01-01

Full Text Available In this paper, we present the automatic PID tuning procedure based on the Method of Moments and AMIGO tuning rules. The advantage of the Method of Moments is that the time constant and transport delay are estimated at the areas rather than on the individual points. This results in high resistance to the measurement noises. The sensitivity to measurement noises is a serious problem in other autotuning methods. The second advantage of this method is that it approximates plant during identification process to first order model with time delay. We combined the Method of Moments with the AMIGO tuning rules and implemented this combination as a stand-alone autotuning procedure in Siemens S7-1200 PLC controller. Next, we compared this method with two built-in PID autotuning procedures which were available in Siemens S7-1200 PLC controller. The procedure was tested for three types of plant models: with lag-dominated, balanced, and delay-dominated dynamics. We simulated the plants on a PC in Matlab R2013a. The connection between the PC and PLC was maintained through a National Instruments data acquisition board, NI PCI-6229. We conducted tests for step change in the set point, trajectory tracking, and load disturbances. To assess control quality, we used IAE index. We limited our research to PI algorithm. The results prove that proposed method was better than two built-in tuning methods provided by Siemens, oscillating between a few and even a dozen percent in most cases. The proposed method is universal and can be implemented in any PLC controller.

The most extensive reconstruction of nuclear power plant with VVER 440/V230 reactor

International Nuclear Information System (INIS)

Ferenc, M.

2000-01-01

The nuclear power plant V-1 Bohunice consists of two VVER-440 units with V-230 reactors. Unit 1 was commissioned in 1978 and Unit 2 in 1980. Large experience and knowledge from the operation of previous units with V-230 reactors were incorporated into the V-1 design, which resulted in a higher level of safety and operational reliability of these units. The Siemens company which won an international bidding process developed these basic goals for the Gradual Upgrading into the so called Basic Engineering (BE). For the implementation of the Gradual Upgrading in line with the BE, Rekon consortium was established consisting of Siemens and VUJE. The implementation of the Gradual Upgrading is scheduled for the time period of 1996 - 2000. Siemens was responsible for the upgrading strategy - based on the approved results of the basic engineering phase and the PSAR, the engineering and realization of all I and C improvements, and also for the seismic upgrade. VUJE's responsibility covered the detailed engineering and implementation of mechanical, electrical and civil part of upgrading measures as well as overall organisation and evaluation of verification tests. The consortium awarded contracts for final planning and design, installation services and commissioning to other Slovakian subcontractors in order to ensure the largest possible local content. The gradual reconstruction of the V-1 Bohunice with V230 reactors represents a comprehensive reconstruction of safety-related systems and equipment. Following its completion, the units will be operated with a safety level accepted internationally. (author)

Transforming an industrial giant. Interview by Thomas A. Stewart and Louise O'Brien.

Science.gov (United States)

von Pierer, Heinrich

2005-02-01

In his 12 years at the helm of Siemens, CEO Heinrich von Pierer designed and directed a major transformation. Taking this German icon from a technically superb but slow-moving industrial giantto a disciplined yet nimble multinational has posed enormous challenges. Since 1992, Siemens has revamped its portfolio of businesses, expanded its reach into 192 countries, and created a more local-market-driven culture, gaining recognition as one of the best-managed and most competitive companies in the world. In this edited interview with HBR editor Thomas A. Stewart and consulting editor Louise O'Brien, von Pierer describes the requirements for transformation and culture change and how he broke down historical barriers at Siemens. He shares his insights about portfolio restructuring, his lessons from competing with GE, and the pros and cons of being based in Europe versus America. He reflects on the true start of globalization after the fall of the Berlin wall and on how dramatically the company needed to change in order to counter the resulting pricing pressures across all of its businesses. He talks, too, about the biggest challenge on his successor's desk-"the particular challenge of China;" he says. Amid all these topics, von Pierer reiterates the importance of people: "We all talk about people as our most important resource, but as a matter of fact, who's really taking care of people?... We need [their] backing. We can't afford to run into a situation where people no longer accept what we do."

Nokia liidrikoht surve all / Tõnis Arnover

Index Scriptorium Estoniae

Arnover, Tõnis, 1952-

2003-01-01

Kuigi III kvartali tulemuste alusel on Nokia jätkuvalt turuliider, on tema kasv peatunud ning kiiresti arenevad konkurendid - Sony Ericsson, Motorola ja Siemens seavad ettevõtte positsiooni ohtu. Mobiiltelefonideturule tulemise plaanist on märku andnud ka Microsoft. Diagrammid: Nokia annab järele

Reshaping the Army Corps of Engineers’ Workforce

Science.gov (United States)

2013-03-01

Coca Cola Company, General Electric, IBM, Viacom, Cox Communications, MasterCard, and Accenture. Louise Kursmark is a leading expert in resume writing...and is a hiring consultant to Coca - Cola , Nortel, Siemens, and other Fortune 500 companies. She has authored 18 books about resume writing

PET/MRI for Preoperative Planning in Patients with Soft Tissue Sarcoma

DEFF Research Database (Denmark)

Loft Jakobsen, Annika; Jensen, Karl Erik; L�fgren, Johan

2013-01-01

Clinical positron emission tomography (PET)/magnetic resonance imaging (MRI) acquisition protocols may improve the evaluation of soft tissue sarcomas (STS) prior to surgical planning. We examined two patients with lower extremity STS using a Siemens Biograph mMR PET/MRI scanner and the glucose...

Motion tracking in narrow spaces: A structured light approach

DEFF Research Database (Denmark)

Olesen, Oline Vinter; Paulsen, Rasmus Reinhold; Højgaard, Liselotte

2010-01-01

We present a novel tracking system for patient head motion inside 3D medical scanners. Currently, the system is targeted at the Siemens High Resolution Research Tomograph (HRRT) PET scanner. Partial face surfaces are reconstructed using a miniaturized structured light system. The reconstructed 3D...

DendroCT - Dendrochronology without damage

DEFF Research Database (Denmark)

Bill, Jan; Daly, Aoife; Johnsen, Øistein

2012-01-01

The paper describes an evaluation of the applicability of computer tomography in archaeological dendrochronology. Two different computer tomographs were tested, a . Siemens Somatom Emotion single slice scanner developed for medical use, and a . Nikon Metrology model . XT H 225 LC, which is an ind...

700MHz Spectrum Requirements for Canadian Public Safety Interoperable Mobile Broadband Data Communications

Science.gov (United States)

2011-02-28

TDD approved in Europe, China, India, Japan, Malaysia , Australia. 26 DRDC CSS CR 2011-01 Table 4.1: LTE frequency...Motorola  NEC  Nortel  Nokia-Siemens  Samsung  Qualcomm  Texas Instruments 2. The introduction of new technology into a network will

PET/MRI in the presence of metal implants: Completion of the attenuation map from PET emission data

DEFF Research Database (Denmark)

Fuin, Niccolo; Pedemonte, Stefano; Catalano, Onofrio A.

2017-01-01

of radioactivity and attenuation from the emission data to determine the position, shape, and linear attenuation coefficient (LAC) of metallic implants. Methods: The initial estimate of the attenuation map was obtained using the MR Dixon method currently available on the Siemens Biograph mMR scanner...

Arsenic Removal from Drinking Water by Coagulation/Filtration U.S. EPA Demonstration Project at Sandusky, MI. Six-Month Evaluation Report

Science.gov (United States)

This report documents the activities performed during and the results obtained from the first six months of the EPA arsenic removal technology demonstration project at the City of Sandusky, MI facility. The objectives of the project are to evaluate 1) the effectiveness of Siemen...

ARSENIC REMOVAL FROM DRINKING WATER BY IRON REMOVAL AND ADSORPTIVE MEDIA USEPA DEMONSTRATION PROJECT AT STEWART, MN. SIX-MONTH EVALUATION REPORT

Science.gov (United States)

This report documents the activities performed and the results obtained from the first six months of the EPA arsenic removal technology demonstration project at the Stewart, MN facility. The main objective of the project is to evaluate the effectiveness of Siemens¿ Type II AERALA...

MR pulse sequences for selective relaxation time measurements: a phantom study

DEFF Research Database (Denmark)

Thomsen, C; Jensen, K E; Jensen, M

1990-01-01

a Siemens Magnetom wholebody magnetic resonance scanner operating at 1.5 Tesla was used. For comparison six imaging pulse sequences for relaxation time measurements were tested on the same phantom. The spectroscopic pulse sequences all had an accuracy better than 10% of the reference values....

Omamise vaev või rendiõnn? / Merlis Nõgene

Index Scriptorium Estoniae

Nõgene, Merlis, 1976-

2006-01-01

Arvutite renditeenust tutvustavad Elioni finantseerimistoodete teenistuse juhataja Kalev Karus, Siemens Financial Services'i tegevjuht Virgo Jaani ja 3 Step IT müügidirektor Aivar Kraus. Kommenteerib Infoweb ASi arendusdirektor Tauri Purkas. Lisad: Rentimise plussid ja miinused; Tallinna koolide arvutite renditsükkel purunes

FY 2000 report on the trend survey of technical development of high speed/high function electronic devices such as quantum functional devices in association with the rationalization of energy utilization; 2000 nendo energy shiyo gorika ni kakawaru ryoshika kino soshi nado kosoku kokino denshi device no gijutsu kaihatsu doko chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Concerning the results of the R and D made by NEDO of superlattice devices (FY 1981-1990) and quantum functional devices (QFD) (FY 1991-2000) as high speed/high function electronic devices, this survey was aimed at investigating the trend of the newest technology to grasp the technical effects, the state of commercialization/product-making, and the future. The effects, technical subjects, etc. in the R and D of superlattice devices were succeeded to the R and D of QFD as the succeeding project. Here, therefore, the paper arranged the outlook of the commercialization/product-making in relation to the R and D of QFD and the future R and D subjects. In the R and D, features of QFD as target were made clear. The commercialization is limited to Motorola's QMMIC, Fujitsu's RHET, etc. As to the other R and D items, subjects of the technical development to be implemented toward the commercialization just became clear. The subject is the heightening of micro (nano meter) processing technology. The important subject, in particular, is compatibility of the heightening of micro processing and the improvement of throughput. (NEDO)

Vectorization, parallelization and porting of nuclear codes on the VPP500 system (parallelization). Progress report fiscal 1996

Energy Technology Data Exchange (ETDEWEB)

Watanabe, Hideo; Kawai, Wataru; Nemoto, Toshiyuki [Fujitsu Ltd., Tokyo (Japan); and others

1997-12-01

Several computer codes in the nuclear field have been vectorized, parallelized and transported on the FUJITSU VPP500 system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. These results are reported in 3 parts, i.e., the vectorization part, the parallelization part and the porting part. In this report, we describe the parallelization. In this parallelization part, the parallelization of 2-Dimensional relativistic electromagnetic particle code EM2D, Cylindrical Direct Numerical Simulation code CYLDNS and molecular dynamics code for simulating radiation damages in diamond crystals DGR are described. In the vectorization part, the vectorization of two and three dimensional discrete ordinates simulation code DORT-TORT, gas dynamics analysis code FLOWGR and relativistic Boltzmann-Uehling-Uhlenbeck simulation code RBUU are described. And then, in the porting part, the porting of reactor safety analysis code RELAP5/MOD3.2 and RELAP5/MOD3.2.1.2, nuclear data processing system NJOY and 2-D multigroup discrete ordinate transport code TWOTRAN-II are described. And also, a survey for the porting of command-driven interactive data analysis plotting program IPLOT are described. (author)

Vectorization, parallelization and porting of nuclear codes on the VPP500 system (vectorization). Progress report fiscal 1996

Energy Technology Data Exchange (ETDEWEB)

Nemoto, Toshiyuki; Kawai, Wataru [Fujitsu Ltd., Tokyo (Japan); Kawasaki, Nobuo [and others

1997-12-01

Several computer codes in the nuclear field have been vectorized, parallelized and transported on the FUJITSU VPP500 system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. These results are reported in 3 parts, i.e., the vectorization part, the parallelization part and the porting part. In this report, we describe the vectorization. In this vectorization part, the vectorization of two and three dimensional discrete ordinates simulation code DORT-TORT, gas dynamics analysis code FLOWGR and relativistic Boltzmann-Uehling-Uhlenbeck simulation code RBUU are described. In the parallelization part, the parallelization of 2-Dimensional relativistic electromagnetic particle code EM2D, Cylindrical Direct Numerical Simulation code CYLDNS and molecular dynamics code for simulating radiation damages in diamond crystals DGR are described. And then, in the porting part, the porting of reactor safety analysis code RELAP5/MOD3.2 and RELAP5/MOD3.2.1.2, nuclear data processing system NJOY and 2-D multigroup discrete ordinate transport code TWOTRAN-II are described. And also, a survey for the porting of command-driven interactive data analysis plotting program IPLOT are described. (author)

Vectorization, parallelization and porting of nuclear codes on the VPP500 system (porting). Progress report fiscal 1996

Energy Technology Data Exchange (ETDEWEB)

Nemoto, Toshiyuki [Fujitsu Ltd., Tokyo (Japan); Kawasaki, Nobuo; Tanabe, Hidenobu [and others

1998-01-01

Several computer codes in the nuclear field have been vectorized, parallelized and transported on the FUJITSU VPP500 system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. These results are reported in 3 parts, i.e., the vectorization part, the parallelization part and the porting part. In this report, we describe the porting. In this porting part, the porting of reactor safety analysis code RELAP5/MOD3.2 and RELAP5/MOD3.2.1.2, nuclear data processing system NJOY and 2-D multigroup discrete ordinate transport code TWOTRAN-II are described. And also, a survey for the porting of command-driven interactive data analysis plotting program IPLOT are described. In the parallelization part, the parallelization of 2-Dimensional relativistic electromagnetic particle code EM2D, Cylindrical Direct Numerical Simulation code CYLDNS and molecular dynamics code for simulating radiation damages in diamond crystals DGR are described. And then, in the vectorization part, the vectorization of two and three dimensional discrete ordinates simulation code DORT-TORT, gas dynamics analysis code FLOWGR and relativistic Boltzmann-Uehling-Uhlenbeck simulation code RBUU are described. (author)

Implementation of a model in Geant4 of an accelerator on Cloudmc, a Web application for the parallelization of Monte Carlo simulations in the Cloud

International Nuclear Information System (INIS)

Miras del Rio, H.; Jimenez Marrufo, R.; Cortes Giraldo, M. A.; Miras del Rio, C.

2013-01-01

This paper describes the implementation in CloudMC of a simulation program MC, based on the code of Geant4, a Siemens Accelerator model Oncor with the intention that in future can be used for calculation of radiation treatments with MC in short periods of time. (Author)

Worldwide Report, Telecommunications Policy, Research and Development.

Science.gov (United States)

1984-02-22

AFFAIRS Briefs Siemens Electronics to Turkey 62 FEDERAL REPUBLIC OF GERMANY FRG Awards Contracts for Integrated Digital Network (VDI NACHRICHTEN ...NETWORK Duesseldorf VDI NACHRICHTEN in German 23 Dec 83 p 1 [Article: "FRG’s Own Radio Satellite"] [Text] The German Federal Postal Service (DBP

76 FR 32228 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2011-06-03

... identified by name by the International Trade Commission as a member of a domestic industry in an... (Formerly Enterprise Unix Division). 75,052 Siemen's Industry, Inc.. Columbus, OH....... 75,066 General... Music Holdings Pitman, NJ......... Inc., D/B/A Sony DADC Americas (``SMHI''), Sony Corporation of...

A Monte Carlo simulation study of the impact of novel scintillation crystals on performance characteristics of PET scanners

DEFF Research Database (Denmark)

Ghabrial, Amir; Franklin, Daniel; Zaidi, Habib

2018-01-01

Objective: The purpose of this study is to validate a Monte Carlo simulation model for the clinical Siemens Biograph mCT PET scanner using the GATE simulation toolkit, and to evaluate the performance of six different scintillation materials in this model using the National Electrical Manufactures...

Applying PLM in a formula student racing car design process

NARCIS (Netherlands)

Pels, H.J.; van Dongen, P.; Bouras, A.

2008-01-01

Field research on PLM application is difficult, because companies don't like scientists to play with their system or with their processes. At Technische Universiteit Eindhoven (TU/e) the University Racing Eindhoven (URE) team decided to use the Siemens PLM Teamcenter license of the university to

Implementation of a model in Geant4 of an accelerator on Cloudmc, a Web application for the parallelization of Monte Carlo simulations in the Cloud; Implementacion de un modelo en Geant4 de un acelerador en Cloudmc, una aplicacion Web para la paralelizacion de simulaciones Monte Carlo en la nube

Energy Technology Data Exchange (ETDEWEB)

Miras del Rio, H.; Jimenez Marrufo, R.; Cortes Giraldo, M. A.; Miras del Rio, C.

2013-07-01

This paper describes the implementation in CloudMC of a simulation program MC, based on the code of Geant4, a Siemens Accelerator model Oncor with the intention that in future can be used for calculation of radiation treatments with MC in short periods of time. (Author)

Fulltext PDF

Indian Academy of Sciences (India)

indices generated from single crystal X-ray data, gave the following cell: a ... on a Siemens Smart-CCD diffractometer equipped with a normal focus, 2⋅4 kW ..... The final calcined product at 850°C is dense Fe(PO3)2 [JCPDS file card no.

Synthesis and spectroscopic study of high quality alloy Cdx S ...

Indian Academy of Sciences (India)

Wintec

In the present study, we report the synthesis of high quality CdxZn1–xS nanocrystals alloy at. 150°C with .... (XRD) using a Siemens model D 500, powder X-ray ... decays were analysed using IBH DAS6 software. 3. ... This alloying process is.

MRI-based detailed evaluation of the anatomy of the human coccyx ...

African Journals Online (AJOL)

2016-09-08

Sep 8, 2016 ... Then, the images were transferred to the workstation (Syngo VIA console, Siemens). The measurements were made with the aid of these images. All of the measurements were obtained by two experienced radiologist and orthopedist. Intra/interobserver variability for the measurements was determined at ...

Model oriented application generation for industrial control systems

International Nuclear Information System (INIS)

Copy, B.; Barillere, R.; Blanco, E.; Fernandez Adiego, B.; Nogueira Fernandes, R.; Prieto Barreiro, I.

2012-01-01

The CERN Unified Industrial Control Systems framework (UNICOS) is a software generation methodology and a collection of development tools that standardizes the design of industrial control applications. A Software Factory, named the UNICOS Application Builder (UAB), was introduced to ease extensibility and maintenance of the framework, introducing a stable meta-model, a set of platform-independent models and platform-specific configurations against which code generation plug-ins and configuration generation plug-ins can be written. Such plug-ins currently target PLC programming environments (Schneider and SIEMENS PLCs) as well as SIEMENS WinCC Open Architecture SCADA (previously known as ETM PVSS) but are being expanded to cover more and more aspects of process control systems. We present what constitutes the UNICOS meta-model and the models in use, how these models can be used to capture knowledge about industrial control systems and how this knowledge can be used to generate both code and configuration for a variety of target usages. (authors)

Take back program for ICN products - a B2B solution for WEEE implementation

Energy Technology Data Exchange (ETDEWEB)

Renner, H. [Siemens ICN, Munich (Germany); Chryssos, G. [eds-r GmbH, Thierhaupten (Germany)

2004-07-01

In 2005 the WEEE (waste electrical and electronic equipment) directive has to be implemented in each country of the European Union. The implementation of this directive affects a significant part of end of life equipment which has to be taken back directly from B2B (business to business) users. In contrast to end of life equipment from private households, there is a high residual value and therefore high reuse potential of B2B equipment. Within this scope a take back program for telecommunications equipment has been implemented by Siemens ICN together with the recycling company and re-use expert eds-r GmbH in order to optimise recovery and take back logistics processes. Essential elements of this take back program are area-wide take back logistics with web based track and trace system, professional dismantling and selection of reusable components with subsequent redelivery to service and sales network of Siemens ICN as well as professional recovery. (orig.)

Advanced fuel assemblies for economic and flexible operation of light water reactors

International Nuclear Information System (INIS)

Urban, P.; Bender, D.

2001-01-01

Increasing competition in the electricity market sets up a corresponding competition between the different electricity producing technologies. This makes further improvements in the economics of nuclear power generation a vital item for the future of nuclear energy. Though the costs for development, design and fabrication of fuel assemblies contribute only about 10% to the fuel cycle costs, the design and the performance of the fuel assemblies considerably influences total electricity generation cost. By the recent creation of Framatome ANP the nuclear activities of Framatome and Siemens were combined into one company. In the past, both had made considerable achievements in the development of fuel assemblies and related services supporting the goal of safe and economic electricity generation by light water reactors. The examples described in this paper cover former Siemens products and experience. In the future, our combined experience bases will be an ideal platform to offer further substantial improvements to our customers. (author)

Fuel assembly loads during a hypothetical blowdown event in a PWR

International Nuclear Information System (INIS)

Stabel, J.; Bosanyi, B.; Kim, J.D.

1991-01-01

As a consequence of a hypothetical sudden break of the main coolant pipe of a PWR, RPV-internals and fuel assemblies (FA's) are undergoing horizontal and vertical motions. FA's may impact against each other, against core shroud or against lower core support. The corresponding impact loads must be absorbed by the FA spacer grids and guide thimbles. In this paper FA-loads are calculated with and without consideration of Fluid-Structure-Interaction (FSI) effects for assumed different break sizes of the main coolant pipe. The analysis has been performed for a hypothetical cold leg break of a typical SIEMENS-4 loop plant. For this purpose the codes DAPSY/DAISY (GRS, Germany) were coupled with the structural code KWUSTOSS (SIEMENS). It is shown that the FA loads obtained in calculations with consideration of FSI effects are by a factor of 2-4 lower than those obtained in the corresponding calculations without consideration of FSI. (author)

Transient and Temporary Overvoltages in the Collection and Export Power Grid in Offshore Wind Power Plants

DEFF Research Database (Denmark)

Arana Aristi, Iván; Nielsen, Arne Hejde; Holbøll, Joachim

2009-01-01

This paper presents an overview of an ongoing Industrial Ph.D. project “Overvoltages and Protection in Offshore Wind Power Grids”, at the Technical University of Denmark (DTU) in cooperation with DONG Energy and Siemens Wind Power. The objective of this project is to improve the understanding and......, reactors and wind farm power transformers, and to develop a methodology on how to select appropriate equipment and protection system.......This paper presents an overview of an ongoing Industrial Ph.D. project “Overvoltages and Protection in Offshore Wind Power Grids”, at the Technical University of Denmark (DTU) in cooperation with DONG Energy and Siemens Wind Power. The objective of this project is to improve the understanding...... and simulation models of the main electrical components in wind farms, based on available information, measurement data and simulation tools. The main aim of this project is to obtain validated models of wind turbine (WT) converters, WT transformers, submarine cables, vacuum circuit breakers, surge arresters...

Image quality in conventional chest radiography. Evaluation using the postprocessing tool Diamond View

International Nuclear Information System (INIS)

Niemann, Tilo; Reisinger, Clemens; Rau, Philipp; Schwarz, Jochen; Ruis-Lopez, Laura; Bongartz, Georg

2010-01-01

The objective of this work was to evaluate the influence of the postprocessing tool Diamond View (Siemens AG Medical Solutions, Germany) on image quality in conventional chest radiography. Evaluation of image quality remains a challenge in conventional radiography. Based on the European Commission quality criteria we evaluated the improvement of image quality when applying the new postprocessing tool Diamond View (Siemens AG Medical solutions, Germany) to conventional chest radiographs. Three different readers prospectively evaluated 102 digital image pairs of chest radiographs. Statistical analysis was performed with a p value <0.05 considered as significant. Images were evaluated on basis of the modified imaging Quality Criteria by the Commission of the European Communities. Each of the 11 image quality criteria was evaluated separately using a five point classification. Statistical analysis showed an overall tendency for improved image quality for Diamond View (DV) for all criteria. Significant differences could be found in most of the criteria. In conclusion DV improves image quality in conventional chest radiographs.

T and D on sale, Areva on punishment; T and D a la vente, Areva a la peine

Energy Technology Data Exchange (ETDEWEB)

Maincent, G

2009-05-15

Areva group, the world leader of the nuclear industry, is looking for 5 billion euros to finance its investments. However, the French government which owns 90% of the group, mainly through the CEA, is not willing to supply this financial help. Therefore, about 40% of Areva group's turnover could change hands soon. In fact, the French government has asked Areva to consider the selling of its daughter company T and D (Transmission and Distribution) which is one of the major poles of the group's activity. Thanks to T and D, Areva can propose a complete range of products, services and systems from the low- to the extra-high voltage, and can be present on other energy markets, from the conventional to the renewable power generation. Already weakened by the departure of Siemens, Areva, without T and D would lose its full power in front of competitors like GE-Hitachi, Toshiba-Westinghouse or Rosatom-Siemens. (J.S.)

Cervical cancer. Application of MR imaging in brachytherapy

International Nuclear Information System (INIS)

Ebe, Kazuyu; Matsunaga, Naofumi

1996-01-01

For the purpose of application of MRI in arrangement of brachytherapy of cervical cancer, a method was proposed to see the radiation doses in surrounding tissues by superimposing the dose distribution pattern of the radiation source on the MR image. The applicator for the source was filled with water to get its T2-weighted image and was inserted in the patients. The MRI apparatus was Siemens Magnetom Vision (1.5T) with phased array coil. T2-weighted sagittal and coronary images were taken by turbospin echo and HASTE methods. The section thickness was 5 mm. The dose distribution pattern was superimposed on the frontal and lateral images by Siemens Mevaplan to see the doses in surrounding tissues. In 4 patients, it was possible to estimate the radiation dose in the posterior wall of bladder, anterior wall of rectum and urinary duct. The method is promising for arranging brachytherapy of cervical cancer. (K.H.)

Application of virtual reality on MRA data of complex vascular structures

International Nuclear Information System (INIS)

Floemer, F.; Knopp, M.V.; Schoenberg, S.O.; Glombitza, G.; Meinzer, H.P.; Brockmeier, K.

2000-01-01

During the last years because of the progress in magnetic resonance imaging (MRI) magnetic resonance angiography (MRA) has become a serious alternative to conventional X-ray angiography. The potential of MRA in combination with methods for three-dimensional reconstruction will be presented and different methods for image post-processing are discussed based on a number of cases. The examinations were performed on a clinical 1.5 T magnetic resonance tomograph (Siemens Vision, Erlangen) using conventional MR angiographgy sequences. The different options of post-processing were carried out online on the console and offline using dedicated workstations (Siemens Virtuoso and CHILI). Discussion: Complex post-processing procedures are applied to different areas like pulmonary vasculature, thoracic aorta, abdominal aorta, and renal transplant arteries. Different diagnostic values can be seen for the variety of three-dimensional reconstruction methods. According to our experience volume rendering has been selected as the method of choice due to the time needed for reconstruction and the information content of the resulting image. (orig.) [de

Use of Industrial Components in SL/BT Equipment Controls

CERN Document Server

Carlier, E

1999-01-01

The control system of all SPS target stations, beam absorbers and other aperture limiting devices is presently being refurbished, using solely standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers serve as equipment controllers. They are connected through Profibus to a WinNT front-end running the SIEMENS WinCC SCADA package which acts as local controller and gateway for remote access. A variant configuration, where the PLCs are directly linked to Ethernet, has been used for controlling the SPS Q measurement kickers. These and some other SL/BT projects will be reviewed where fully off-the-shelf components have been successfully integrated into the SL accelerator controls infrastructure. The arguments leading to the various technical choices will be laid down including a report of the experience gained. Finally, the presentation will address the perspective and current ideas for using industrial components in controlling SL/BT equipment during the LHC era.

The new control system of the SPS target sector

CERN Document Server

Carlier, E; Mecredy, N; O'Leary, J

1999-01-01

The SPS, the Super Proton Synchrotron at CERN, is an accelerator originally designed and commissioned in 1976 for protons. The control system of the SPS target stations, beam absorbers and other aperture limiting devices was developed in the seventies. It was mainly based on home made electronics and equipment dependent software. With time, this electronics has become obsolete, difficult to maintain in operation and not suitable for integration into a modern control system. In 1997, a project was set up to modernise the electronics and the related software. The new control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment controllers and connected through PROFIBUS to a Windows-NT front-end PC running the SIEMENS WinCC SCADA package which acts as local controller and remote access gateway. This fully industrial solution has been successfully integrated into the actual SPS accelerator control infrast...

Whole-body PET/MRI: The effect of bone attenuation during MR-based attenuation correction in oncology imaging

DEFF Research Database (Denmark)

Aznar, M.C.; Sersar, Rachida; Saabye, J.

2014-01-01

patients referred for a PET/CT were injected with either [18F]-FDG or [18F]-NaF and imaged on PET/CT (Biograph TruePoint/mCT, Siemens) and PET/MRI (mMR, Siemens) following a standard single-injection, dual-imaging clinical WB-protocol. Routine MR-AC was based on in-/opposed-phase MR imaging (orgMR-AC). PET...... and then investigate different strategies to account for bone tissue in clinical PET/MR imaging. To this purpose, bone tissue representation was extracted from separate CT images, and different bone representations were simulated from hypothetically derived MR-based bone classifications. Methods: Twenty oncology.......3%) and lowest for spongCT (–2.2%, range: 0.0% to –13.7%). Conclusions: In PET/MR imaging using standard MR-AC PET uptake values in soft lesions and bone lesions are underestimated by about 10%. In individual patients this bias can be as high as 22%, which is significant during clinical follow-up exams. If bone...

Digital Mammography Tomosynthesis

International Nuclear Information System (INIS)

Gergov, I.; Alexov, G.; Rusonov, K.

2017-01-01

Siemens MAMMOMAT Inspiration with Tomosynthesis enhances the diagnostic precision in mammographic screening. The apparatus has a wide-angle tomosynthesis up to 50 degrees. The Siemens breast augmentation algorithm reconstructs multiple two-dimensional breast images into three-dimensional images at the lowest doses to help detect tumors hidden from the overlapping chest tissue, allowing for a more accurate diagnosis than standard 2-dimensional digital mammography, and reducing the number of false positive results. 3D digital tomosynthesis improves the precision of detecting and diagnosing a larger number of expansive lesions, ensures better morphological mass analysis and architectural distortion, and detecting calcifications by adding digital breast tomosynthesis to the traditional two-dimensional digital mammogram of the patient. In this way, it solves the problem of overlapping parenchyma, reduces the number of unnecessary biopsies from questionable sonomammographic findings, and the need for stressful repeating procedures, which usually contributes to both better patient outcomes and cost saving. [bg

Hacking control systems, switching lights off!

CERN Multimedia

Computer Security Team

2013-01-01

Have you ever heard about “Stuxnet”? “Stuxnet” was a very sophisticated cyber-attack against the Iranian nuclear programme. Like in a spy movie, the attackers infiltrated the uranium enrichment plant at Natanz, arranged for infected USB sticks to be inserted into local PCs, and then the USB viruses did the rest.   Not only did the virus employ four distinct - so far unknown - weaknesses in the Windows operating system, but each weakness could have been sold on the underground market for up to $250,000 each. The virus was targeted to disrupt Iran's uranium production. At first, it scanned the infected PCs for dedicated SCADA (Supervisory Control and Data Acquisition) software from Siemens. Once the virus hit upon that software, it tried to identify any control system components, i.e. so-called PLCs (programmable logic controllers), attached to that PC. If the PLC matched a certain brand (Siemens S7) and configuration, the virus downloaded additi...

An algorithm to estimate the volume of the thyroid lesions using SPECT

International Nuclear Information System (INIS)

Pina, Jorge Luiz Soares de; Mello, Rossana Corbo de; Rebelo, Ana Maria

2000-01-01

An algorithm was developed to estimate the volume of the thyroid and its functioning lesions, that is, those which capture iodine. This estimate is achieved by the use of SPECT, Single Photon Emission Computed Tomography. The algorithm was written in an extended PASCAL language subset and was accomplished to run on Siemens ICON System, a special Macintosh environment that controls the tomographic image acquisition and processing. In spite of be developed for the Siemens DIACAN gamma camera, the algorithm can be easily adapted for the ECAN camera. These two Cameras models are among the most common ones used in Nuclear Medicine in Brazil Nowadays. A phantom study was used to validate the algorithm that have shown that a threshold of 42% of maximum pixel intensity of the images it is possible to estimate the volume of the phantoms with an error of 10% in the range of 30 to 70 ml. (author)

Evaluating the investment decision-making process for business expansion into Africa: A case study

Directory of Open Access Journals (Sweden)

Jason Kasozi

2012-12-01

Full Text Available Africa is a potential domain for international business. However, numerous uncertainties characterize this environment and the challenge for multinationals remains the ability to assess the true value of an Africa-bound investment project. A telecommunications’ survey was conducted on Siemens Southern Africa (Siemens and Mobile Telecommunications’ Network (MTN and the following observations were made: (1 Approaches used by the businesses to value Africa-bound investments were not comprehensive and inclusive. (2 Neutrality existed to the suggestion that Africa is unique and that investment decisions should be customized to suit it. (3 Certain approaches used by the businesses were modified to suit pertaining investment circumstances thereby differing from literature, and (4, participants desired to learn new ways of improving this process suggesting dissatisfaction with the current norm. This paper presents the conflicting ideologies about the decision-making process for business expansion into Africa and suggests ways of improving the process

T and D on sale, Areva on punishment

International Nuclear Information System (INIS)

Maincent, G.

2009-01-01

Areva group, the world leader of the nuclear industry, is looking for 5 billion euros to finance its investments. However, the French government which owns 90% of the group, mainly through the CEA, is not willing to supply this financial help. Therefore, about 40% of Areva group's turnover could change hands soon. In fact, the French government has asked Areva to consider the selling of its daughter company T and D (Transmission and Distribution) which is one of the major poles of the group's activity. Thanks to T and D, Areva can propose a complete range of products, services and systems from the low- to the extra-high voltage, and can be present on other energy markets, from the conventional to the renewable power generation. Already weakened by the departure of Siemens, Areva, without T and D would lose its full power in front of competitors like GE-Hitachi, Toshiba-Westinghouse or Rosatom-Siemens. (J.S.)

First startup of the Siemens SL prototype magnets W VII in the IPP

International Nuclear Information System (INIS)

Amenda, W.; Kullmann, D.; Krueger, P.; Pillsticker, M.

The first test results with a big superconductive prototype coil developed for the Garching Stellarator W VII are reported. Flux jumping at low currents did not start quenching. The critical current of the Nb-Ti coil reaches 91 percent of the short sample value. The stored energy at quenching is 1.83 MJ and the maximum value of the magnetic field in the winding region is 61.5 kG. The mechanical stresses did not damage the windings. Degradation was not observed. A training of the coil was not necessary. Altogether the test was successful, as important technical problems were satisfactorily solved. Only parts of cryogenic systems should be improved in order to reduce the helium losses. (U.S.)

Survey of the passive safety systems of the BWR 1000 concept from SIEMENS

Energy Technology Data Exchange (ETDEWEB)

Mattern, J; Brettschuh, W; Palavecino, C [SIEMENS, Energieerzeugung, Offenbach (Germany)

1996-12-01

Through the use of passive safety systems and components for accident control in addition to the active systems required for plant operation, a higher degree of safety against core-endangering conditions is achieved which is no longer ruled by complex system engineering dependent on power supply and activation by I and C systems. A low core power density and large water inventories stored inside the reactor pressure vessel as well as inside and outside the containment ensure good plant behaviour in the event of transients or accidents. These passive safety systems - which required neither electric power to function nor I and C systems for actuation, being activated solely on the basis of changes in process variables such as water level, pressure and temperature - provide a grace period of more than 5 days after the onset of accident conditions before manual intervention becomes necessary. 8 figs.

FLUES - A new monitoring system for leak detection and location

International Nuclear Information System (INIS)

Jax, P.; Streicher, V.

1995-01-01

A new Leakage Monitoring and Location System with high sensitivity was developed and tested by Siemens during the last years. Now this system has been installed in a Nuclear Power Plant. The experiences gained during the qualification test and the first months of operation can be reported. (author)

Foreign Ownership and Long-term Survival

DEFF Research Database (Denmark)

Kronborg, Dorte; Thomsen, Steen

2006-01-01

probability. On average exit risk for domestic companies is 2.3 times higher than for foreign companies. First movers like Siemens, Philips, Kodak, Ford, GM or Goodyear have been active in the country for almost a century. Relative foreign survival increases with company age. However, the foreign survival...

Provenance, tectonic setting and source-area weathering of the ...

Indian Academy of Sciences (India)

valley in the Spiti basin, India ... presence of clay minerals control the abundances of these elements and suggests a warm and humid climate for this region. ..... Length Dispersive XRF system (Siemens SRS. 3000). ..... that the effect of diagenetic process on the REE ..... A greenhouse to icehouse transition; Precamb. Res.

Radiation exposure management systems at Baltimore Gas and Electric's Clavert Cliffs Nuclear Power Plant

International Nuclear Information System (INIS)

Stallings, G.B.

1995-01-01

This paper documents how BGE has moved from traditional passive dosimetry methods to using the latest electronic systems supported by fully computerized access control and dose record management. One of the cornerstones of these developments is the Electronic Personal Dosemeter (EPD), manufactured by Siemens in the UK. (author)

Belene Nuclear Power Plant project status

International Nuclear Information System (INIS)

Nikolov

2008-01-01

The status of the Belene project with the following main features is described: Reactor type - PWR, Russian Design Plant supplier - ASE, AREVA NP/Siemens Reactor thermal power - 2 x 3012 MW Electric output -2 x 1060 MW Net efficiency - 35 % Capacity factor - 90 % Design Life Time - 60 years

Corporation-led urban development

NARCIS (Netherlands)

Potters, B.; Heurkens, E.W.T.M.

2015-01-01

Since a couple of years a remarkable phenomenon is witnessed in the field of urban development which entails that large multinationals corporations, such as IKEA and Siemens, start to engage in urban development projects. As their motivation to do so is unclear, it is difficult to estimate whether

Quality assurance during site construction. Pt. 6

International Nuclear Information System (INIS)

Schwarz, N.

1980-01-01

Scope of 'Site Construction concerning Electrical Equipment' (Installation, erection, commissioning, operation): tasks and organization of Siemens-Field Services Division; organization on site; receiving, incoming inspection and storage of material; installation, erection; (drawings, instructions, documents / execution of installation / personnel qualification). Non conformance and corrective actions; quality records; internal audits. (orig.)

Report of NPSAT1 Battery Thermal Contact Resistance Testing, Modeling and Simulation

Science.gov (United States)

2012-10-01

interface through use of the Siemens NX I-DEAS thermal model generator ( TMG ) software. Once the orbital parameters are defined, the appropriate interface...I-DEAS TMG software. For the case when the battery is mounted to the boundary condition plate an additional ‘null’ element was created to work

77 FR 20782 - Foreign-Trade Zone 161-Sedgwick County, KS; Application for Temporary/Interim Manufacturing...

Science.gov (United States)

2012-04-06

... Turbine Nacelles and Hubs); Hutchinson, KS An application has been submitted to the Executive Secretary of... County), Kansas. Under T/IM procedures, Siemens has requested authority to produce wind turbine nacelles... (4008.11), hydraulic hoses (4009.21, 4009.42), rubber gaskets and o-rings (4016.93), vibration dampeners...

Connectivist Communication Networks

Science.gov (United States)

Waßmann, Ingolf; Nicolay, Robin; Martens, Alke

2016-01-01

Facing the challenges of the digital age concerning lifelong learning, this contribution presents an approach to dynamically establish Connectivist communication networks. According the statement "the pipe is more important than the content within the pipe" by Georg Siemens, learning in digital age includes the connection of people to…

Atrial and ventricular volume and function in persistent and permanent atrial fibrillation, a magnetic resonance imaging study

DEFF Research Database (Denmark)

Therkelsen, Susette Krohn; Groenning, Bjoern Aaris; Svendsen, Jesper Hastrup

2005-01-01

the inter-study reproducibility of the measurements. Nineteen healthy volunteers, 19 patients with permanent AF, and 58 patients with persistent AF had cardiac dimensions evaluated by 6-mm cinematographic breath-hold MRI scans using a 1.5 Tesla Siemens Vision Magnetom scanner with a phased array chest coil...

Computational fluid dynamics using in vivo ultrasound blood flow measurements

DEFF Research Database (Denmark)

Traberg, Marie Sand; Pedersen, Mads Møller; Hemmsen, Martin Christian

2012-01-01

. The geometry for the CFD simulation model was obtained by segmentation of MRI scans using a 3 Tesla scanner (Magnetom Trio, Siemens Healthcare, Erlangen, Germany). Spectral velocity data were obtained from a BK Medical ProFocus scanner using a research interface. All data were obtained from healthy volunteers...

Finnish EPR Olkiluoto 3. The world's first third-generation reactor now under construction

International Nuclear Information System (INIS)

2007-01-01

The EPR was developed by Framatome and Siemens KWU (the nuclear division of Siemens), whose nuclear activities were combined in January 2001 to form Framatome ANP, now AREVA NP. The French electricity utility EDF (Electricite de France), together with the major German utilities, played an active role in the project. The safety authorities of the two countries joined forces to bring their respective safety standards into line and draw up joint design rules for the new reactor. On December 18, 2003, the consortium formed by AREVA and Siemens - and led by AREVA - signed a contract with TVO for the turnkey construction of the EPR. The overall Olkiluoto 3 project cost has been estimated by TVO at around euros 3 Billion. TVO is responsible for the overall project management and licensing process with the Finnish Safety Authority STUK. In the pre-qualification phase, STUK concluded that the EPR can meet the Finnish licensing requirements. All specific comments will be taken into account for the realization of the project. In January 2005, STUK emphasized in its safety assessment that the evolutionary EPR design compared to predecessor product lines has been further enhanced by AREVA. This paper presents first, The Finnish energy situation (Electricity consumption and supply, Finland's Kyoto CO 2 cutback, Competitiveness of nuclear power), and then the EPR in Olkiluoto (General schedule of responsibilities, Important milestones of the project). Finally, the EPR third-generation and advanced reactor is presented with its position in the international competition (Targeted design objectives, Main characteristics, competitiveness, safety, Additional measures to prevent the occurrence of events likely to damage the core, Increased protection against the consequences of core melt)

Quantitative assessment of left ventricular function with dual-source CT in comparison to cardiac magnetic resonance imaging: initial findings

Energy Technology Data Exchange (ETDEWEB)

Busch, S.; Johnson, T.R.C.; Wintersperger, B.J.; Minaifar, N.; Bhargava, A.; Rist, C.; Reiser, M.F.; Becker, C.; Nikolaou, K. [University of Munich, Department of Clinical Radiology, Munich (Germany)

2008-03-15

Cardiac magnetic resonance imaging and echocardiography are currently regarded as standard modalities for the quantification of left ventricular volumes and ejection fraction. With the recent introduction of dual-source computedtomography (DSCT), the increased temporal resolution of 83 ms should also improve the assessment of cardiac function in CT. The aim of this study was to evaluate the accuracy of DSCT in the assessment of left ventricular functional parameters with cardiac magnetic resonance imaging (MRI) as standard of reference. Fifteen patients (two female, 13 male; mean age 50.8 {+-} 19.2 years) underwent CT and MRI examinations on a DSCT (Somatom Definition; Siemens Medical Solutions, Forchheim, Germany) and a 3.0-Tesla MR scanner (Magnetom Trio; Siemens Medical Solutions), respectively. Multiphase axial CT images were analysed with a semiautomatic region growing algorithms (Syngo Circulation; Siemens Medical Solutions) by two independent blinded observers. In MRI, dynamic cine loops of short axis slices were evaluated with semiautomatic contour detection software (ARGUS; Siemens Medical Solutions) independently by two readers. End-systolic volume (ESV), end-diastolic volume (EDV), ejection fraction (EF) and stroke volume (SV) were determined for both modalities, and correlation coefficient, systematic error, limits of agreement and inter-observer variability were assessed. In DSCT, EDV and ESV were 135.8 {+-} 41.9 ml and 54.9 {+-} 29.6 ml, respectively, compared with 132.1 {+-} 40.8 ml EDV and 57.6 {+-} 27.3 ml ESV in MRI. Thus, EDV was overestimated by 3.7 ml (limits of agreement -46.1/+53.6), while ESV was underestimated by 2.6 ml (-36.6/+31.4). Mean EF was 61.6 {+-} 12.4% in DSCT and 57.9 {+-} 9.0% in MRI, resulting in an overestimation of EF by 3.8% with limits of agreement at -14.7 and +22.2%. Rank correlation rho values were 0.81 for EDV (P = 0.0024), 0.79 for ESV (P = 0.0031) and 0.64 for EF (P = 0.0168). The kappa value of inter

Quantitative assessment of left ventricular function with dual-source CT in comparison to cardiac magnetic resonance imaging: initial findings

International Nuclear Information System (INIS)

Busch, S.; Johnson, T.R.C.; Wintersperger, B.J.; Minaifar, N.; Bhargava, A.; Rist, C.; Reiser, M.F.; Becker, C.; Nikolaou, K.

2008-01-01

Cardiac magnetic resonance imaging and echocardiography are currently regarded as standard modalities for the quantification of left ventricular volumes and ejection fraction. With the recent introduction of dual-source computedtomography (DSCT), the increased temporal resolution of 83 ms should also improve the assessment of cardiac function in CT. The aim of this study was to evaluate the accuracy of DSCT in the assessment of left ventricular functional parameters with cardiac magnetic resonance imaging (MRI) as standard of reference. Fifteen patients (two female, 13 male; mean age 50.8 ± 19.2 years) underwent CT and MRI examinations on a DSCT (Somatom Definition; Siemens Medical Solutions, Forchheim, Germany) and a 3.0-Tesla MR scanner (Magnetom Trio; Siemens Medical Solutions), respectively. Multiphase axial CT images were analysed with a semiautomatic region growing algorithms (Syngo Circulation; Siemens Medical Solutions) by two independent blinded observers. In MRI, dynamic cine loops of short axis slices were evaluated with semiautomatic contour detection software (ARGUS; Siemens Medical Solutions) independently by two readers. End-systolic volume (ESV), end-diastolic volume (EDV), ejection fraction (EF) and stroke volume (SV) were determined for both modalities, and correlation coefficient, systematic error, limits of agreement and inter-observer variability were assessed. In DSCT, EDV and ESV were 135.8 ± 41.9 ml and 54.9 ± 29.6 ml, respectively, compared with 132.1 ± 40.8 ml EDV and 57.6 ± 27.3 ml ESV in MRI. Thus, EDV was overestimated by 3.7 ml (limits of agreement -46.1/+53.6), while ESV was underestimated by 2.6 ml (-36.6/+31.4). Mean EF was 61.6 ± 12.4% in DSCT and 57.9 ± 9.0% in MRI, resulting in an overestimation of EF by 3.8% with limits of agreement at -14.7 and +22.2%. Rank correlation rho values were 0.81 for EDV (P = 0.0024), 0.79 for ESV (P 0.0031) and 0.64 for EF (P = 0.0168). The kappa value of inter-observer variability were

CLINICAL PERFORMANCE CHARACTERISTICS OF ELECSYS® FREE-ΒHCG AND PAPP-A FOR FIRST TRIMESTER TRISOMY 21 RISK ASSESSMENT IN GESTATIONAL WEEKS 8+0 TO 14+0

DEFF Research Database (Denmark)

Tørring, Niels; aulesa, C; Eiben, Bernd

2014-01-01

with the Brahms Kryptor®, PerkinElmer AutoDELFIA® and Siemens IMMULITE® assays. Furthermore a clinical validation including generation of assay specific medians from gestational age 8+0 to 14+0 weeks, and clinical test performance of risk assessment was performed. Results The imprecision of the Elecsys free βh...

Influence functionals in deep inelastic reactions

International Nuclear Information System (INIS)

Avishai, Y.

1978-01-01

It is suggested that the concept of influence functionals introduced by Feynman and Vernon could be applied to the study of deep inelastic reactions among heavy ions if the coupling between the relative motion and the internal degrees of freedom has a separable form as suggested by Hofmann and Siemens. (Auth.)

Harmonic models of a back-to-back converter in large offshore wind farms compared with measurement data

DEFF Research Database (Denmark)

Kocewiak, Lukasz Hubert; Hjerrild, Jesper; Bak, Claus Leth

2009-01-01

The offshore wind farm with installed back-to-back power converter in wind turbines is studied. As an example the Burbo Bank offshore wind farm with Siemens Wind Power wind turbines is taken into consideration. The wind farm is simulated in DIgSILENT Power Factory software in order to determine...

[The effect of an experimental occlusal interference on the masticatory cycle recorded by electromagnetic pantography].

Science.gov (United States)

Godefroy, J N; Yardin, M

1991-06-01

The effects of occlusal interference on masticatory cycles have been studied in twenty nine volunteers with complete natural dentition, using an electromagnetic pantograph (Sirognatograph, Siemens A.G.). After a one week recall, a decrease in speed motion was noted and the range of cycles in the horizontal plane had been altered.

The Application of S7-400H redundant PLC in I and C system for waterworks in nuclear power plant

International Nuclear Information System (INIS)

Pang Yuxiang

2013-01-01

This paper introduces Siemens S7-400H redundant PLC which is employed to implement monitor and control systems for waterworks in nuclear power plant. It focuses on the configuration and realization of the redundant system. The safety and reliability of the system is improved by using redundant CPU, network and server. (authors)

Safety upgrading of Bohunice V1 NPP

International Nuclear Information System (INIS)

2001-01-01

This CD is multimedia presentation of programme safety upgrading of Bohunice V1 NPP. It consist of next chapters: (1) Introductory speeches; (2) Nuclear power plant WWER 440; (3) Safety improvement; (4) Bohunice Nuclear power plants subsidiary; (5) Siemens; (6) REKON; (7) VUJE Trnava, Inc. - Engineering, Design and Research Organisation; (8) Album

77 FR 15779 - Medical Devices; Availability of Safety and Effectiveness Summaries for Premarket Approval...

Science.gov (United States)

2012-03-16

...-2011-M-0746 Pluromed, Inc........ LEGOO September 28, 2011. P090024, FDA-2011-M-0737 Siemens Healthcare...). P110022, FDA-2011-M-0786 Roche Diagnostics ELECSYS anti-HBC IGM October 26, 2011. Corp. immunoassay and....... November 14, 2011. H090002, FDA-2011-M-0848 BSD Medical Corp..... BSD-2000 November 18, 2011. hyperthermia...

In vivo measurement of intracellular pH in human brain during different tensions of carbon dioxide in arterial blood. A 31P-NMR study

DEFF Research Database (Denmark)

Jensen, K E; Thomsen, C; Henriksen, O

1988-01-01

The effect of changes in carbon dioxide tension in arterial blood upon intracellular pH in brain tissue was studied in seven healthy volunteers, aged 22-45 years. The pH changes were monitored by use of 31P nuclear magnetic resonance spectroscopy, performed on a whole-body 1.5 Tesla Siemens imaging...

correction of tarsal ectropion following harmful eye medication in a

African Journals Online (AJOL)

Dr O Babalola

INTRODUCTION. Traditional medicine is the sum total of knowledge, skills and ... the eyelids, Siemens syndrome (a rare inherited skin disorder where the skin around .... the nursing staff. Less than careful change of dressings could have led to loss of the graft. The patient did not reveal what led to the application of noxious.

Multi-detector CT assessment of traumatic renal lesions

African Journals Online (AJOL)

Mohamed Samir Shaaban

2015-07-10

Jul 10, 2015 ... Aim of the work: To demonstrate different traumatic lesions of the kidneys using multi-detector. CT, and its use in ... sis and staging of renal trauma and guiding management. © 2015 The ... Emotion 6 (Siemens, Germany), and 16 detectors PHILIPS .... with active bleeding within the hematoma and was man-.

Validation of a simultaneous PET/MR system model for PET simulation using GATE

International Nuclear Information System (INIS)

Monnier, Florian; Fayad, Hadi; Bert, Julien; Schmidt, Holger; Visvikis, Dimitris

2015-01-01

Simultaneous PET/MR acquisition shows promise in a range of applications. Simulation using GATE is an essential tool that allows obtaining the ground truth for such acquisitions and therefore helping in the development and the validation of innovative processing methods such as PET image reconstruction, attenuation correction and motion correction. The purpose of this work is to validate the GATE simulation of the Siemens Biograph mMR PET/MR system. A model of the Siemens Biograph mMR was developed. This model includes the geometry and spatial positioning of the crystals inside the scanner and the characteristics of the detection process. The accuracy of the model was tested by comparing, on a real physical phantom study, GATE simulated results to reconstructed PET images using measured results obtained from a Siemens Biograph mMR system. The same parameters such as the acquisition time and phantom position inside the scanner were fixed for our simulations. List-mode outputs were recovered in both cases and reconstructed using the OPL-EM algorithm. Several parameters were used to compare the two reconstructed images such as profile comparison, signal-to-noise ratio and activity contrast analysis. Finally patient acquired MR images were segmented and used for the simulation of corresponding PET images. The simulated and acquired sets of reconstructed phantom images showed close emission values in regions of interest with relative differences lower than 5%. The scatter fraction was within a <3% agreement. Close matching of profiles and contrast indices were obtained between simulated and corresponding acquired PET images. Our results indicate that the GATE developed Biograph mMR model is accurate in comparison to the real scanner performance and can be used for evaluating innovative processing methods for applications in clinical PET/MR protocols.

Generalized eMC implementation for Monte Carlo dose calculation of electron beams from different machine types.

Science.gov (United States)

Fix, Michael K; Cygler, Joanna; Frei, Daniel; Volken, Werner; Neuenschwander, Hans; Born, Ernst J; Manser, Peter

2013-05-07

The electron Monte Carlo (eMC) dose calculation algorithm available in the Eclipse treatment planning system (Varian Medical Systems) is based on the macro MC method and uses a beam model applicable to Varian linear accelerators. This leads to limitations in accuracy if eMC is applied to non-Varian machines. In this work eMC is generalized to also allow accurate dose calculations for electron beams from Elekta and Siemens accelerators. First, changes made in the previous study to use eMC for low electron beam energies of Varian accelerators are applied. Then, a generalized beam model is developed using a main electron source and a main photon source representing electrons and photons from the scattering foil, respectively, an edge source of electrons, a transmission source of photons and a line source of electrons and photons representing the particles from the scrapers or inserts and head scatter radiation. Regarding the macro MC dose calculation algorithm, the transport code of the secondary particles is improved. The macro MC dose calculations are validated with corresponding dose calculations using EGSnrc in homogeneous and inhomogeneous phantoms. The validation of the generalized eMC is carried out by comparing calculated and measured dose distributions in water for Varian, Elekta and Siemens machines for a variety of beam energies, applicator sizes and SSDs. The comparisons are performed in units of cGy per MU. Overall, a general agreement between calculated and measured dose distributions for all machine types and all combinations of parameters investigated is found to be within 2% or 2 mm. The results of the dose comparisons suggest that the generalized eMC is now suitable to calculate dose distributions for Varian, Elekta and Siemens linear accelerators with sufficient accuracy in the range of the investigated combinations of beam energies, applicator sizes and SSDs.

Technical and dosimetric aspects of respiratory gating using a pressure-sensor motion monitoring system

International Nuclear Information System (INIS)

Li, X. Allen; Stepaniak, Christopher; Gore, Elizabeth

2006-01-01

This work introduces a gating technique that uses 4DCT to determine gating parameters and to plan gated treatment, and employs a Siemens linear accelerator to deliver the gated treatment. Because of technology incompatibility, the 4DCT scanner (LightSpeed, GE) and the Siemens accelerator require two different motion-monitoring systems. The motion monitoring system (AZ-773V, Anzai Med.) used for the gated delivery utilizes a pressure sensor to detect the external respiratory motion (pressure change) in real time. Another system (RPM, Varian) used for the 4DCT scanner (LightSpeed, GE) is based on an infrared camera to detect motion of external markers. These two motion monitoring systems (RPM and Anzai systems) were found to correlate well with each other. The depth doses and profile measured for gated delivery (with a duty cycle of 25% or 50%) were found to agree within 1.0% with those measured for ungated delivery, indicating that gating did not significantly alter beam characteristics. The measurement verified also that the MU linearity and beam output remained unchanged (within 0.3%). A practical method of using 4DCT to plan a gated treatment was developed. The duty cycle for either phase or amplitude gating can be determined based on 4DCT with consideration of set-up error and delivery efficiency. The close-loop measurement involving the entire gating process (imaging, planning, and delivery) showed that the measured isodose distributions agreed with those intended, validating the accuracy and reliability of the gating technique. Based these observations, we conclude that the gating technique introduced in this work, integrating Siemens linear accelerator and Anzai pressure sensor device with GE/Varian RPM 4DCT, is reliable and effective, and it can be used clinically to account for respiratory motion during radiation therapy

Towards solar grade silicon: Challenges and benefits for low cost photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Pizzini, Sergio [Ned Silicon Spa, Via Th. Edison 6, 60027 Osimo (Ancona) (Italy)

2010-09-15

It is well known that silicon in its various structural configurations (single crystal, multicrystalline, amorphous, micro-nanocrystalline) supplies almost 90% of the substrates used in the photovoltaic industry. It is also known, since years, that the photovoltaic (PV) industry shows a marked growth trend, which demanded and demands a continuous, huge increase of the bulk silicon supply in the order of 30%/yr. In order to fulfill their today- and future needs, many companies worldwide took the decision to start the installation of many thousand tons/year plants, most of them using the Siemens process, some of them using the MG route, to produce the so called solar grade (SG) silicon. The advantages of the Siemens process are well known, as it provides ultrapure silicon, directly usable for growing either single crystalline Czochralski ingots or multicrystalline ingots using the directional solidification (DS) technique. The disadvantages are its high energetic cost (a minimum of 120 kWH/kg) and the possible losses of chlorinated gases in the atmosphere, with possible severe environmental problems. The advantages of the MG route are still potential, as there is no commercially available production of solar silicon as yet, and rely on its reduced energetic costs (a maximum of 25-30 kWh/kg) for a feedstock directly usable for growing multicrystalline ingots using the DS technique. The drawbacks of silicon of MG origin are its larger concentration of metallic impurities, as compared with the Siemens one, the higher B and P content, and the potentially high carbon content. The aim of this paper is to deal with some of the problems encountered so far with the silicon of MG origin with respect to the metallic and non-metallic impurities content, as well as to propose technologically feasible solar grade feedstock specifications. (author)

Advanced steam power plant concepts with optimized life-cycle costs: A new approach for maximum customer benefit

Energy Technology Data Exchange (ETDEWEB)

Seiter, C.

1998-07-01

The use of coal power generation applications is currently enjoying a renaissance. New highly efficient and cost-effective plant concepts together with environmental protection technologies are the main factors in this development. In addition, coal is available on the world market at attractive prices and in many places it is more readily available than gas. At the economical leading edge, standard power plant concepts have been developed to meet the requirements of emerging power markets. These concepts incorporate the high technological state-of-the-art and are designed to achieve lowest life-cycle costs. Low capital cost, fuel costs and operating costs in combination with shortest lead times are the main assets that make these plants attractive especially for IPPs and Developers. Other aspects of these comprehensive concepts include turnkey construction and the willingness to participate in BOO/BOT projects. One of the various examples of such a concept, the 2 x 610-MW Paiton Private Power Project Phase II in Indonesia, is described in this paper. At the technological leading edge, Siemens has always made a major contribution and was pacemaker for new developments in steam power plant technology. Modern coal-fired steam power plants use computer-optimized process and plant design as well as advanced materials, and achieve efficiencies exceeding 45%. One excellent example of this high technology is the world's largest lignite-fired steam power plant Schwarze Pumpe in Germany, which is equipped with two 800 MW Siemens steam turbine generators with supercritical steam parameters. The world's largest 50-Hz single-shaft turbine generator with supercritical steam parameters rated at 1025 MW for the Niederaussem lignite-fired steam power plant in Germany is a further example of the sophisticated Siemens steam turbine technology and sets a new benchmark in this field.

Challenge nuclear power: portrait of the Framatome ANP

International Nuclear Information System (INIS)

Gueldner, R.

2004-01-01

The energy industry, which needs to meet the global energy and in particular the power demand of a world population that is continuously increasing - at present there are over 6.2 billion living on this Earth -, has for a few years now been undergoing fundamental change: In the wake of liberalization the course has been set for global competition. The companies involved in the field of nuclear energy, both plant operators and suppliers, have also been impacted by this change. Besides internal programs to cut costs and enhance capabilities, corporate mergers at the national and international level are also playing a significant role. Companies will thus be able to tackle future challenges, with good prospects for nuclear energy as a cost-effective, environmentally friendly form of power generation. In response to market trends the nuclear business activities of Framatome and Siemens were merged in early 2001 to form Framatome ANP, which now is an AREVA ad Siemens company. Framatome ANP is dedicated to the development and turnkey construction of nuclear power plants and research reactors as well as comprehensive engineering, electrical and I and C systems, plant services, modernization, fuel supplies and heavy component manufacture for many reactor designs, including those supplied by other vendors. The company is headquartered in Paris with regional subsidiaries in Germany and the U.S. AREVA has a 66 percent stake and Siemens a 34 percent stake in Framatome ANP. The German regional subsidiary Framatome ANP GmbH has its head offices in Erlangen. Its subsidiaries are Advanced Nuclear Fuels GmbH (ANF), which focuses on fuel production, and intelligeNDT Systems and Services GmbH and Co. KG, which performs nondestructive testing in the field of nuclear engineering and other high-tech branches of industry. (orig.)

Analytical and clinical performance of thyroglobulin autoantibody assays in thyroid cancer follow-up.

Science.gov (United States)

Katrangi, Waddah; Grebe, Stephan K G; Algeciras-Schimnich, Alicia

2017-10-26

While thyroglobulin autoantibodies (TgAb) can result in false low serum thyroglobulin (Tg) immunoassay (IA) measurements, they might also be indicators of disease persistence/recurrence. Hence, accurate TgAb measurement, in addition to Tg quantification, is crucial for thyroid cancer monitoring. We compared the analytical and clinical performance of four commonly used TgAb IAs. We measured Tg by mass spectrometry (Tg-MS) and by four pairs of Tg and TgAb IAs (Beckman, Roche, Siemens, Thermo) in 576 samples. Limit of quantitation (LOQ) and manufacturers' upper reference interval cut-off (URI) were used for comparisons. Clinical performance was assessed by receiving operator characteristics (ROC) curve analysis. Quantitative and qualitative agreement between TgAb-IAs was moderate with R2 of 0.20-0.70 and κ from 0.41-0.66 using LOQ and 0.47-0.71 using URI. In samples with TgAb interference, detection rates of TgAb were similar using LOQ and URI for Beckman, Siemens, and Thermo, but much lower for the Roche TgAb-IA when the URI was used. In TgAb positive cases, the ROC areas under the curve (AUC) for the TgAb-IAs were 0.59 (Beckman), 0.62 (Siemens), 0.59 (Roche), and 0.59 (Thermo), similar to ROC AUCs achieved with Tg. Combining Tg and TgAb measurements improved the ROC AUCs compared to Tg or TgAb alone. TgAb-IAs show significant qualitative and quantitative differences. For 2 of the 4 TgAb-IAs, using the LOQ improves the detection of interfering TgAbs. All assays showed suboptimal clinical performance when used as surrogate markers of disease, with modest improvements when Tg and TgAb were combined.

Modeling of a collimator micro-multilayers in the Pinnacle planning system

International Nuclear Information System (INIS)

Garcia Hernandez, T.; Brualla Gonzalez, L.; Vicedo Gonzalez, A.; Rosello Ferrando, J.; Granero Cabanero, D.

2013-01-01

To model and validate, in the system of planning and calculation Pinnacle, a micro-multilayers collimator mounted on an accelerator Siemens Primus. The objective is to take advantage of the improvements offered by the algorithm of convolution of cone collapsed and the capacity of the system of modeling the rounded end of the blades. (Author)

Modeling of a collimator micro-multilayers in the Pinnacle planning system; Modelado de un colimador micromultilaminas en el sistema de planificacion Pinnacle

Energy Technology Data Exchange (ETDEWEB)

Garcia Hernandez, T.; Brualla Gonzalez, L.; Vicedo Gonzalez, A.; Rosello Ferrando, J.; Granero Cabanero, D.

2013-07-01

To model and validate, in the system of planning and calculation Pinnacle, a micro-multilayers collimator mounted on an accelerator Siemens Primus. The objective is to take advantage of the improvements offered by the algorithm of convolution of cone collapsed and the capacity of the system of modeling the rounded end of the blades. (Author)

Evaluation of the integral and Peripheral dose of healthy tissue in external radiotherapy treatments of prostate cancer with technical 3DCRT, reverse IMRT and VMAT; Evaluacion de la dosis integral y dosis periferica del tejido sano en tratamientos de radioterapia externa de cancer de prostata con tecnicas de 3DCRT, IMRT inversa y VMAT

Energy Technology Data Exchange (ETDEWEB)

Vicente Granado, D.; Carrasco Herrera, M. A.; Mateo Perez, C.; Velazquez Miranda, S.; Herrador Cordoba, M.

2013-07-01

To model and validate, in the system of planning and calculation Pinnacle, a micro-multilayers collimator mounted on an accelerator Siemens Primus. The objective is to take advantage of the improvements offered by the algorithm of convolution of cone collapsed and the capacity of the system of modeling the rounded end of the blades. (Author)

The radiation isocenter verification using an electronic system of image portal; Verificacion del isocentro de radiacion utilizando un sistema electronico de imagen portal

Energy Technology Data Exchange (ETDEWEB)

Merino Gestoso, J. A.; Portas Ferradas, B. C.; Rosa Menendez, P.; Chapel Gomez, M. L.; Fernandez Cerezo, S.; Vazquez Varela, P.

2013-07-01

In this paper we present a procedure optimized for verification the isocenter of radiation with respect to the rotation of the gantry and the turn isocentric table of two accelerators SIEMENS, ONCOR and ARTISTE with a mannequin developed in our service and analyzing the images acquired with the EPID from each of the teams. (Author)

The CERN Detector Safety System for LHC Experiments

CERN Document Server

Lüders, S; Morpurgo, G; Schmeling, S M

2003-01-01

The Detector Safety System (DSS), developed at CERN in common for the four LHC experiments under the auspices of the Joint Controls Project (JCOP), will be responsible for assuring the equipment protection for these experiments. Therefore, the DSS requires a high degree of both availability and reliability. It is composed of a Front-end and a Back-end part. The Front-end is based on a redundant Siemens PLC, to which the safety-critical part of the DSS task is delegated. The PLC Front-end is capable of running autonomously and of automati-cally taking predefined protective actions whenever re-quired. It is supervised and configured by the CERN-cho-sen PVSS SCADA system via a Siemens OPC server. The supervisory layer provides the operator with a status display and with limited online reconfiguration capabili-ties. Configuration of the code running in the PLCs is completely data driven via the contents of a ?Configura-tion Database?. Thus, the DSS can easily adapt to the different and constantly evolving require...

The control system of the polarized internal target of ANKE at COSY

Energy Technology Data Exchange (ETDEWEB)

Kleines, H. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Sarkadi, J. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Zwoll, K. [Zentralinstitut fuer Elektronik, Forschungszentrum Juelich, 52425 Juelich (Germany); Engels, R. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Grigoryev, K. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Mikirtychyants, M. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Nekipelov, M. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Rathmann, F. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany); Seyfarth, H. [Institut fuer Kernphysik, Forschungszentrum Juelich, 52425 Juelich (Germany)]. E-mail: h.seyfarth@fz-juelich.de; Kravtsov, P. [St. Petersburg Nuclear Physics Institute, 188350 Gatchina (Russian Federation); Vasilyev, A. [St. Petersburg Nuclear Physics Institute, 188350 Gatchina (Russian Federation)

2006-05-10

The polarized internal target for the ANKE experiment at the Cooler Synchrotron COSY of the Forschungszentrum Juelich utilizes a polarized atomic beam source to feed a storage cell with polarized hydrogen or deuterium atoms. The nuclear polarization is measured with a Lamb-shift polarimeter. For common control of the two systems, industrial equipment was selected providing reliable, long-term support and remote control of the target as well as measurement and optimization of its operating parameters. The interlock system has been implemented on the basis of SIEMENS SIMATIC S7-300 family of programmable logic controllers. In order to unify the interfacing to the control computer, all front-end equipment is connected via the PROFIBUS DP fieldbus. The process control software was implemented using the Windows-based WinCC toolkit from SIEMENS. The variety of components, to be controlled, and the logical structure of the control and interlock system are described. Finally, a number of applications derived from the present development to other, new installations are briefly mentioned.

The control system of the polarized internal target of ANKE at COSY

Science.gov (United States)

Kleines, H.; Sarkadi, J.; Zwoll, K.; Engels, R.; Grigoryev, K.; Mikirtychyants, M.; Nekipelov, M.; Rathmann, F.; Seyfarth, H.; Kravtsov, P.; Vasilyev, A.

2006-05-01

The polarized internal target for the ANKE experiment at the Cooler Synchrotron COSY of the Forschungszentrum Jülich utilizes a polarized atomic beam source to feed a storage cell with polarized hydrogen or deuterium atoms. The nuclear polarization is measured with a Lamb-shift polarimeter. For common control of the two systems, industrial equipment was selected providing reliable, long-term support and remote control of the target as well as measurement and optimization of its operating parameters. The interlock system has been implemented on the basis of SIEMENS SIMATIC S7-300 family of programmable logic controllers. In order to unify the interfacing to the control computer, all front-end equipment is connected via the PROFIBUS DP fieldbus. The process control software was implemented using the Windows-based WinCC toolkit from SIEMENS. The variety of components, to be controlled, and the logical structure of the control and interlock system are described. Finally, a number of applications derived from the present development to other, new installations are briefly mentioned.

Mapping of iso exposure curves generated by conventional mobile radiodiagnostic equipment and dose in hospitalized patients; Mapeamento de curvas de isoexposicao geradas por equipamentos de radiodiagnostico moveis convencionais e dose em pacientes hospitalizados

Energy Technology Data Exchange (ETDEWEB)

Hoff, Gabriela; Fischer, Andreia Caroline Fischer da Silveira; Accurso, Andre, E-mail: andreia.silveira.001@acad.pucrs.b, E-mail: andre.accurso@acad.pucrs.b [Pontificia Universidade Catolica do Rio Grande do Sul (PUC/RS), Porto Alegre, RS (Brazil). Grupo de Experimentacao e Simulacacao Computacional em Fisica Medica; Andrade, Jose Rodrigo Mendes, E-mail: jose.andrade@santacasa.tche.b [Irmandade da Santa Casa de Misericordia de Porto Alegre, RS (Brazil). Servico de Atencao a Saude e Qualidade de Vida; Bacelar, Alexandre, E-mail: abacelar@hcpa.ufrgs.b [Hospital de Clinicas de Porto Alegre, RS (Brazil). Setor de Fisica Medica e Radioprotecao

2011-10-26

This paper intended to measure iso expositions curves in areas of mobile equipment use. It was selected: a Shimadzu mobile equipment and two Siemens equipment, being used a non-anthropomorphic scatterer. The exposure measurements in mesh of 4.20 x 4.20 cubic centimeters, at a half-height of the simulator and steps of 30 cm, were used by using the radiographic techniques: 100 k Vp and 63 m As (Shimadzu) and 96 k Vp and 40 m As (Siemens). For estimation of environmental equivalent dose, during 12 months, were considered: 3.55 m As/examination and 44.5 procedures/month (adults): and 3.16 m As/examination and 20.1 procedures/month (pediatrics). It was observed that only the values in the distance of 60 cm presented over the maximum limit of environment equivalent dose defined for Free Area (0.5 mSv/year). The points collected at 2.1 m from the primary beam center, have shown to be always 12% of referred limit, shown to be a safe distance for the hospitalized patients

Mapping of iso exposure curves generated by conventional mobile radiodiagnostic equipment and dose in hospitalized patients

International Nuclear Information System (INIS)

Hoff, Gabriela; Fischer, Andreia Caroline Fischer da Silveira; Accurso, Andre; Andrade, Jose Rodrigo Mendes; Bacelar, Alexandre

2011-01-01

This paper intended to measure iso expositions curves in areas of mobile equipment use. It was selected: a Shimadzu mobile equipment and two Siemens equipment, being used a non-anthropomorphic scatterer. The exposure measurements in mesh of 4.20 x 4.20 cubic centimeters, at a half-height of the simulator and steps of 30 cm, were used by using the radiographic techniques: 100 k Vp and 63 m As (Shimadzu) and 96 k Vp and 40 m As (Siemens). For estimation of environmental equivalent dose, during 12 months, were considered: 3.55 m As/examination and 44.5 procedures/month (adults): and 3.16 m As/examination and 20.1 procedures/month (pediatrics). It was observed that only the values in the distance of 60 cm presented over the maximum limit of environment equivalent dose defined for Free Area (0.5 mSv/year). The points collected at 2.1 m from the primary beam center, have shown to be always 12% of referred limit, shown to be a safe distance for the hospitalized patients

The PANDA tests for the SWR 1000 passive containment cooling system

International Nuclear Information System (INIS)

Dreier, J.; Aubert, C.; Huggenberger, M.; Strassberger, H.J.; Yadigaroglu, G.

1999-01-01

Since 1992, Siemens has been developing the SWR 1000, a new boiling water reactor with passive safety features. This development has been performed in close co-operation with the German nuclear utilities and with support from various European partners. Within the European Union sponsored project 'BWR R+D Cluster for Innovative Passive Safety Systems' and a bilateral contract between Siemens and the Paul Scherrer Institute, the passive containment cooling system of the SWR 1000 design has been investigated in the large-scale PANDA test facility at the Paul Scherrer Institute. A series of six tests were performed to simulate transients selected to cover a range of failure assumptions and accident severity, including core heat up and hydrogen generation. The results graphically demonstrate the self regulating character of the passive heat removal systems and their effectiveness, even under severe load, in limiting the containment pressurisation. Some tentative conclusions for the SWR 1000 are drawn, to be established by detailed analyses of the data, to support models and codes for application to plant transients. (author)

The PANDA tests for the SWR 1000 passive containment cooling system

International Nuclear Information System (INIS)

Dreier, J.; Aubert, C.; Huggenberger, M.; Strassberger, H.J.; Meseth, J.; Yadigaroglu, G.

1999-01-01

Since 1992, Siemens has been developing the SWR 1000, a new boiling water reactor with passive safety features. This development has been performed in close co-operation with the German nuclear utilities and with support from various European partners. Within the European Union sponsored project 'BWR R and D Cluster for Innovative Passive Safety Systems' and a bilateral contract between Siemens and the Paul Scherrer Institute, the passive containment cooling system of the SWR 1000 design has been investigated in the large-scale PANDA test facility at the Paul Scherrer Institute. A series of six tests were performed to simulate transients selected to cover a range of failure assumptions and accident severity, including core heat up and hydrogen generation. The results graphically demonstrate the self regulating character of the passive heat removal systems and their effectiveness, even under severe load, in limiting the containment pressurisation. Some tentative conclusions for the SWR1000 are drawn, to be established by detailed analyses of the data, to support models and codes for application to plant transients. (author)

Establishment study of the in vivo imaging analysis with small animal imaging modalities for bio-durg development

International Nuclear Information System (INIS)

Jang, Beomsu; Park, Sanghyeon; Choi, Dae Seong; Park, Jeonghoon; Jung, Uhee; Lee, Yun Jong

2012-01-01

In this study, we established the image modalities (micro-PET, SPECT/CT) using the experimental animal (mouse) for the development of imaging assessment method for the bio-durg and extramural collaboration proposal. We examined the micro-SPECT/CT, PET imaging study using the Siemens Inveon micro-multimodality system (SPECT/CT) and imaging study using the Siemens Inveon micro-multimodality system (SPECT/CT) and micro-PET with 99m Tc tricarbonyl bifunctional chelators and 18 F-clotrimazole derivative. SPECT imaging studies were performed with 99m Tc tricarbonyl BFCs. PET imaging study was performed with 18 F-clotrimazole derivatives. We performed the PET image study of 18 F-clotrimazole derivatives using U87MG tumor bearing mice. Also we tested the intramural and extramural collaboration using small animal imaging modalities and prepared the draft of extramural R and D operation manual for small animal imaging modalities and the experimental animal imaging facility. These research results can be utilized as a basic image study protocols and data for the image assessment of drugs including biological drug

A novel missense mutation (402C-->T) in exon 1 in the EDA gene in a family with X-linked hypohidrotic ectodermal dysplasia

DEFF Research Database (Denmark)

Hertz, Jens Michael; Nørgaard Hansen, K; Juncker, I

1998-01-01

Hypohidrotic ectodermal dysplasia (EDA), or Christ-Siemens-Touraine syndrome, is clinically characterized by hypohidrosis, hypoodontia and hypotrichosis. The X-linked form of the disease has been mapped to Xq12-q13.1, and a gene from this region has recently been cloned. This gene encodes a predi...... in the protein. This mutation cosegregates with the disease in the family and is the first mutation described which affects the predicted transmembrane, hydrophobic domain of the protein.......Hypohidrotic ectodermal dysplasia (EDA), or Christ-Siemens-Touraine syndrome, is clinically characterized by hypohidrosis, hypoodontia and hypotrichosis. The X-linked form of the disease has been mapped to Xq12-q13.1, and a gene from this region has recently been cloned. This gene encodes...... a predicted transmembrane protein of 135 amino acids, which was found to be expressed in keratinocytes, hair follicles, and sweat glands. A variety of rearrangements in this gene have been found in patients with hypohidrotic ectodermal dysplasia. We have screened the probands from nine unrelated Danish...

Benchmark of the CASMO-3G/MICROBURN-B codes for Commonwealth Edison boiling water reactors

International Nuclear Information System (INIS)

Wheeler, J.K.; Pallotta, A.S.

1992-01-01

The Commonwealth Edison Company has performed an extensive benchmark against measured data from three boiling water reactors using the Studsvik lattice physics code CASMO-3G and the Siemens Nuclear Power three-dimensional simulator code MICROBURN-B. The measured data of interest for this benchmark are the hot and cold reactivity, and the core power distributions as measured by the traversing incore probe system and gamma scan data for fuel pins and assemblies. A total of nineteen unit-cycles were evaluated. The database included fuel product lines manufactured by General Electric and Siemens Nuclear Power, wit assemblies containing 7 x 7 to 9 x 9 pin configurations, several water rod designs, various enrichments and gadolina loadings, and axially varying lattice designs throughout the enriched portion of the bundle. The results of the benchmark present evidence that the CASMO-3G/MICROBURN-B code package can adequately model the range of fuel and core types in the benchmark, and the codes are acceptable for performing neutronic analyses of Commonwealth Edison's boiling water reactors

Foetal death in utero: detection on 99Tc-labelled leucocytoscintigraphy

International Nuclear Information System (INIS)

MsGennisken, M.R.; Salehi, N.; Jenkins, B.; Better, N.

1998-01-01

Full text: We present the case of a 26-year-old female from Nauru who presented with recent intermittent fever and vague abdominal pain, which had persisted despite antibiotics. Past history included aplastic anaemia and neutropenia. Ultrasound was not helpful and a labelled white blood cell scan was then organised. The patient''s white blood cells were labelled with 99 mTc tin colloid by the standard in vitro technique and whole body imaging as well as SPECT imaging of the abdomen was performed at five hours on a Siemen''s triple-headed camera. The study demonstrated increased white cell concentration on the right side of the pelvis anteriorly. Subsequent computed tomographic correlation suggested the uterus and right ovary as a potential source of infection. A gynaecological opinion was sought, and dilatation and curettage performed. This revealed infected foetal products. Following the curette and intravenous antibiotics, the patient''s health improved. The patient had denied pregnancy prior to the study. In retrospect, she confirmed irregular menstrual blood loss and weight gain over several months

Power Systems Development Facility Gasification Test Run TC11

Energy Technology Data Exchange (ETDEWEB)

Southern Company Services

2003-04-30

This report discusses Test Campaign TC11 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed gasifier designed to operate as either a combustor or a gasifier in air- or oxygen-blown mode of operation using a particulate control device (PCD). Test run TC11 began on April 7, 2003, with startup of the main air compressor and the lighting of the gasifier start-up burner. The Transport Gasifier operated until April 18, 2003, when a gasifier upset forced the termination of the test run. Over the course of the entire test run, gasifier temperatures varied between 1,650 and 1,800 F at pressures from 160 to 200 psig during air-blown operations and around 135 psig during enriched-air operations. Due to a restriction in the oxygen-fed lower mixing zone (LMZ), the majority of the test run featured air-blown operations.

Foetal death in utero: detection on {sup 99}Tc-labelled leucocytoscintigraphy

Energy Technology Data Exchange (ETDEWEB)

MsGennisken, M.R.; Salehi, N.; Jenkins, B.; Better, N. [Royal Melbourne Hospital, Parkville, VIC, (Australia). Department of Nuclear Medicine

1998-03-01

Full text: We present the case of a 26-year-old female from Nauru who presented with recent intermittent fever and vague abdominal pain, which had persisted despite antibiotics. Past history included aplastic anaemia and neutropenia. Ultrasound was not helpful and a labelled white blood cell scan was then organised. The patient``s white blood cells were labelled with {sup 99}mTc tin colloid by the standard in vitro technique and whole body imaging as well as SPECT imaging of the abdomen was performed at five hours on a Siemen``s triple-headed camera. The study demonstrated increased white cell concentration on the right side of the pelvis anteriorly. Subsequent computed tomographic correlation suggested the uterus and right ovary as a potential source of infection. A gynaecological opinion was sought, and dilatation and curettage performed. This revealed infected foetal products. Following the curette and intravenous antibiotics, the patient``s health improved. The patient had denied pregnancy prior to the study. In retrospect, she confirmed irregular menstrual blood loss and weight gain over several months.

Student Intern Lands Top Prize in National Science Competition | Poster

Science.gov (United States)

By Ashley DeVine, Staff Writer Student intern Sam Pritt’s interest in improving geolocation led him to develop a project that won a top regional prize at the Siemens Competition in Math, Science, and Technology in November. Pritt was awarded a $3,000 college scholarship, and he competed in the national competition in early December.

A value-added strategy

International Nuclear Information System (INIS)

Burr, M.T.

1992-01-01

This article examines the strategy of Siemens AG of Germany in expanding its role in supplying equipment for the independent power project market. The topics of the article include a description of the organization of the company, cooperation with other companies in development of technology and projects, and future expansion of their build-operate-transfer structure worldwide

78 FR 76146 - Granting of Request for Early Termination of the Waiting Period Under the Premerger Notification...

Science.gov (United States)

2013-12-16

... Tofane S.A.; Highmark Health; Tofane S.A. 11/14/2013 20140108 G AEA Investors Fund V LP Siemens... voluntary liquidation) Oman Oil Company S.A.O.C. 20140131 G OCP Trust; CH Hold Corp.; OCP Trust. 20140132 G... Investment Fund, L.P. 20140158 G Assa Abloy AB; Amarr Company; Assa Abloy AB. 20140161 G SoftBank Corp.; R...

America's Answer

Science.gov (United States)

National Math and Science Initiative, 2011

2011-01-01

The U.S. arm of technology giant Siemens Corp. recently reported it has 3,000 jobs open because of the dearth of skilled workers. More than half of those open jobs require science, technology, engineering and math (STEM) skills. A recent study by ManpowerGroup found that a record 52 percent of U.S. employers have difficulty filling critical…

Video dosimetry: evaluation of X-radiation dose by video fluoroscopic image

International Nuclear Information System (INIS)

Nova, Joao Luiz Leocadio da; Lopes, Ricardo Tadeu

1996-01-01

A new methodology to evaluate the entrance surface dose on patients under radiodiagnosis is presented. A phantom is used in video fluoroscopic procedures in on line video signal system. The images are obtained from a Siemens Polymat 50 and are digitalized. The results show that the entrance surface dose can be obtained in real time from video imaging

Plastic scintillation detectors for dose monitoring in digital breast tomosynthesis

Science.gov (United States)

Antunes, J.; Machado, J.; Peralta, L.; Matela, N.

2018-01-01

Plastic scintillators detectors (PSDs) have been studied as dosimeters, since they provide a cost-effective alternative to conventional ionization chambers. Measurement and analysis of energy dependency were performed on a Siemens Mammomat tomograph for two different peak kilovoltages: 26 kV and 35 kV. Both PSD displayed good linearity for each energy considered and almost no energy dependence.

12 billion DM for Germany

International Nuclear Information System (INIS)

Anon.

1975-01-01

The German atomic industry has achieved the break-through to the world market: Brazil orders eight nuclear electricity generating plants from Siemens-AEG daughter Kraftwerk-Union. US concerns attacked the twelve billion DM deal, the biggest export order in the history of German industry. Without avail - the contract is to be signed in Bonn this week. (orig./LH) [de

Radiation doses in neuroangiography for a clinical hospital in Chile

International Nuclear Information System (INIS)

Vergara, F.; Valenzuela, E.

2013-01-01

The objective of this study is to estimate the levels of radiation to the patient in neuroangiography procedures diagnostic and therapy in a Chile's Hospital, using a biplane angiographic system Siemens model ArtisZee. This research was conducted under the auspices of the International Atomic Energy Agency and the support of their radiation protection programs for patients

Technical assistance in relationship with the reloading analysis of the Laguna Verde Unit 2 reactor. Executive abstract

International Nuclear Information System (INIS)

Alonso V, G.; Castro B, M.; Gallegos E, R.; Hernandez L, H.; Montes T, J.L.; Ortiz S, J. J.; Perusquia C, R.

1993-11-01

The objective of the report was to carry out a comparative analysis of costs of energy generation among the designs GE9B of General Electric, 9X9-IX of SIEMENS and SVEA-96 of ABB ATOM, proposed to be used as recharge fuel in the Unit 2 of the Laguna Verde Nuclear Power station. (Author)

A Randomized, Controlled Trial of Intranasal Oxytocin as an Adjunct to Behavioral Therapy for Autism Spectrum Disorder

Science.gov (United States)

2015-10-01

for study eligibility (all with whole-brain coverage in a higher resolution 32-channel coil ): o Resting State: 2x2x2 mm, TR=1.09s, TE=30 (2x- PA and...oversee and execute the project • Facilities - Siemens Magnetom Trio 3 Tesla scanner and High Performance Computing Cluster at the McGovern Institute

Wind Turbine Blade CAD Models Used as Scaffolding Technique to Teach Design Engineers

Science.gov (United States)

Irwin, John

2013-01-01

The Siemens PLM CAD software NX is commonly used for designing mechanical systems, and in complex systems such as the emerging area of wind power, the ability to have a model controlled by design parameters is a certain advantage. Formula driven expressions based on the amount of available wind in an area can drive the amount of effective surface…

Neuro-spect: Imaginología funcional en psiqyuiatría

Directory of Open Access Journals (Sweden)

Dr. G. Ismael Mena

2013-01-01

Las imágenes son adquiridas con un sistema E.CAM de dos cabezales Siemens Co y los resultados son comparados con una base de datos normales para el mismo grupo etario y los resultados entonces demostrados con un escala de colores calibrada en desviaciones estándar sobre y bajo el rango normal que aparece en color gris.

Technical assistance in relationship with the reloading analysis of the Laguna Verde Unit 2 reactor. Executive abstract; Asistencia tecnica en relacion con el analisis de recargas de la CNLV U-2

Energy Technology Data Exchange (ETDEWEB)

Alonso V, G.; Castro B, M.; Gallegos E, R.; Hernandez L, H.; Montes T, J.L.; Ortiz S, J. J.; Perusquia C, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

1993-11-15

The objective of the report was to carry out a comparative analysis of costs of energy generation among the designs GE9B of General Electric, 9X9-IX of SIEMENS and SVEA-96 of ABB ATOM, proposed to be used as recharge fuel in the Unit 2 of the Laguna Verde Nuclear Power station. (Author)

Vectorization, parallelization and porting of nuclear codes on the VPP500 system (vectorization). Progress report fiscal 1997

International Nuclear Information System (INIS)

Kawasaki, Nobuo; Ogasawara, Shinobu; Adachi, Masaaki; Kume, Etsuo; Ishizuki, Shigeru; Tanabe, Hidenobu; Nemoto, Toshiyuki; Kawai, Wataru; Watanabe, Hideo

1999-05-01

Several computer codes in the nuclear field have been vectorized, parallelized and transported on the FUJITSU VPP500 system and/or the AP3000 system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. We dealt with 14 codes in fiscal 1997. These results are reported in 3 parts, i.e., the vectorization part, the parallelization part and the porting part. In this report, we describe the vectorization. In this vectorization part, the vectorization of multidimensional two-fluid model code ACE-3D for evaluation of constitutive equations, statistical decay code SD and three-dimensional thermal analysis code for in-core test section (T2) of HENDEL SSPHEAT are described. In the parallelization part, the parallelization of cylindrical direct numerical simulation code CYLDNS44N, worldwide version of system for prediction of environmental emergency dose information code WSPEEDI, extension of quantum molecular dynamics code EQMD and three-dimensional non-steady compressible fluid dynamics code STREAM are described. In the porting part, the porting of transient reactor analysis code TRAC-BF1 and Monte Carlo radiation transport code MCNP4A on the AP3000 are described. In addition, a modification of program libraries for command-driven interactive data analysis plotting program IPLOT is described. (author)

Vectorization, parallelization and porting of nuclear codes on the VPP500 system (porting). Progress report fiscal 1997

International Nuclear Information System (INIS)

Ishizuki, Shigeru; Nemoto, Toshiyuki; Kawai, Wataru; Watanabe, Hideo; Tanabe, Hidenobu; Kawasaki, Nobuo; Adachi, Masaaki; Ogasawara, Shinobu; Kume, Etsuo

1999-05-01

Several computer codes in the nuclear field have been vectorized, parallelized and transported on the FUJITSU VPP500 system and/or the AP3000 system at Center for Promotion of Computational Science and Engineering in Japan Atomic Energy Research Institute. We dealt with 14 codes in fiscal 1997. These results are reported in 3 parts, i.e., the vectorization part, the parallelization part and the porting part. In this report, we describe the porting. In this porting part, the porting of transient reactor analysis code TRAC-BF1 and Monte Carlo radiation transport code MCNP4A on the AP3000 are described. In addition, a modification of program libraries for command-driven interactive data analysis plotting program IPLOT is described. In the vectorization part, the vectorization of multidimensional two-fluid model code ACE-3D for evaluation of constitutive equations, statistical decay code SD and three-dimensional thermal analysis code for in-core test section (T2) of HENDEL SSPHEAT are described. In the parallelization part, the parallelization of cylindrical direct numerical simulation code CYLDNS44N, worldwide version of system for prediction of environmental emergency dose information code WSPEEDI, extension of quantum molecular dynamics code EQMD and three-dimensional non-steady compressible fluid dynamics code STREAM are described. (author)

Field Performance of Inverter-Driven Heat Pumps in Cold Climates

Energy Technology Data Exchange (ETDEWEB)

Williamson, James [Consortium of Advanced Residential Buildings, Norwalk, CT (United States); Aldrich, Robb [Consortium of Advanced Residential Buildings, Norwalk, CT (United States)

2015-08-19

Traditionally, air-source heat pumps (ASHPs) have been used more often in warmer climates; however, some new ASHPs are gaining ground in colder areas. These systems operate at subzero (Fahrenheit) temperatures and many do not include backup electric resistance elements. There are still uncertainties, however, about capacity and efficiency in cold weather. Also, questions such as “how cold is too cold?” do not have clear answers. These uncertainties could lead to skepticism among homeowners; poor energy savings estimates; suboptimal system selection by heating, ventilating, and air-conditioning contractors; and inconsistent energy modeling. In an effort to better understand and characterize the heating performance of these units in cold climates, the U.S. Department of Energy Building America team, Consortium for Advanced Residential Buildings (CARB), monitored seven inverter-driven, ductless ASHPs across the Northeast. Operating data were collected for three Mitsubishi FE18 units, three Mitsubishi FE12 units, and one Fujitsu 15RLS2 unit. The intent of this research was to assess heat output, electricity consumption, and coefficients of performance (COPs) at various temperatures and load conditions. This assessment was accomplished with long- and short-term tests that measured power consumption; supply, return, and outdoor air temperatures; and airflow through the indoor fan coil.

Subaru FATS (fault tracking system)

Science.gov (United States)

Winegar, Tom W.; Noumaru, Junichi

2000-07-01

The Subaru Telescope requires a fault tracking system to record the problems and questions that staff experience during their work, and the solutions provided by technical experts to these problems and questions. The system records each fault and routes it to a pre-selected 'solution-provider' for each type of fault. The solution provider analyzes the fault and writes a solution that is routed back to the fault reporter and recorded in a 'knowledge-base' for future reference. The specifications of our fault tracking system were unique. (1) Dual language capacity -- Our staff speak both English and Japanese. Our contractors speak Japanese. (2) Heterogeneous computers -- Our computer workstations are a mixture of SPARCstations, Macintosh and Windows computers. (3) Integration with prime contractors -- Mitsubishi and Fujitsu are primary contractors in the construction of the telescope. In many cases, our 'experts' are our contractors. (4) Operator scheduling -- Our operators spend 50% of their work-month operating the telescope, the other 50% is spent working day shift at the base facility in Hilo, or day shift at the summit. We plan for 8 operators, with a frequent rotation. We need to keep all operators informed on the current status of all faults, no matter the operator's location.

A video-amplifier device for the transmission-type electron microscope ELMISCOP I of Siemens

International Nuclear Information System (INIS)

Groboth, G.; Hoerl, E.M.

1975-01-01

In order to get a visual image of the sample at the final screen of a transmission-type electron microscope and to keep at the same time the sample at low temperature a video-amplifier device has been developed by the authors. Details about its design and the necessary reconstruction of the electron microscope equipment are given. The beam current density at the transparent screen is reduced to 10 -12 -10 -13 A.cm -2 . Moreover the costs of this video-amplifier device are lower than those available. (CR)

Imaging Characteristics and Prevalence of Pancreatic Carcinoma in Kosovo During 2011-2015 - Diagnostic Method as Choice.

Science.gov (United States)

Dedushi, Kreshnike; Kabashi, Serbeze; Mucaj, Sefedin; Hasbahta, Gazmed; Ramadani, Naser; Hoxhaj, Astrit

2016-06-01

Pancreatic cancer is the 10(th)most common malignancy and the 4(th)largest cancer killer in adults. The purpose of this paper is to evaluate the number of cases presented with pancreatic carcinoma during the years 2011-2015, our experience of the imaging characteristics of pancreatic carcinoma. We evaluated prevalence of the pancreatic cancers, distant metastases and other local infiltration signs among the total cases of the pancreatic cancers diagnosed in the University Clinical Center of Kosovo, with the aim to compare these research findings to similar studies made in the developed countries. This is a retrospective research study done during the period of 2011-2015. This retrospective research study includes 362 patients recently diagnosed with pancreatic cancer, examined in the period of 2011-2015 at the University Clinical Center of Kosovo. The imaging diagnostics are performed with MSCT Sensation 64 Siemens, MSCT Emotion 6 Siemens, and 1.5T MRI Symphony Siemens, biopsy guide with MSCT Sensation 64 Siemens in the Radiologic Clinic of UCCK; while the histopathology diagnostics has been performed in Clinic of Pathology at UCCK and prevalence is taken from the number of cases Reported at the Institute of Oncology Institute of Statistics and NIPH (National Institute of Public Health of Kosovo). Out of a total of the 362 patients diagnosed with pancreas cancer, results is female 39.5% (n=143) and male 61.5% (n=219), report M: F (1: 1.6), 286 cases resulted in head and neck 79 % (n=286), 76 cases resulted in body and tail cancers (21%), distant metastases in first imaging modality were found in(n=155) patients 43 %, local infiltration was found in patients: gastric infiltration 15 % (n=54), duodenal and papilla infiltration 26% (n=94), local infiltration spleen 16% (n=57), local infiltration mesentery 43 % (n= 155), dilated biliary tree 34 % (n=123), regional lymph node infiltration 83 % (n= 300). Out of a total of the 362 patients diagnosed with pancreas cancer

Secure and Resilient Functional Modeling for Navy Cyber-Physical Systems

Science.gov (United States)

2017-05-24

control systems, it was determined that this project will employ the model of a Ship Chilled Water Distribution System as a central use case. This model...Siemens Corporation Corporate Technology Unrestricted. Distribution Statement A. Approved for public...release; distribution is unlimited. Page 1 of 4 Secure & Resilient Functional Modeling for Navy Cyber-Physical Systems FY17 Quarter 1 Technical Progress

A Brief Survey of the Team Software ProcessSM (TSPSM)

Science.gov (United States)

2011-10-24

de Estudios Superiores de Monterrey Siemens AG SILAC Ingenieria de Software S.A. de C.V...S.A. de C.V. Delivery Excellence Grupo Empresarial Eisei, S.A. de C.V. Herbert Consulting Hitachi Software Engineering Co., Ltd. Idea Entity Corp...SKIZCorp Technology Software Engineering Competence Center (SECC) Software Park Thailand STPP, Inc. TOWA INTEGRADADORA S.A. de C.V. TRX

Magnet power supplies for the DORIS intersecting storage ring

International Nuclear Information System (INIS)

Narciss, H.; Hrabal, D.; Schlueter, W.

1975-01-01

Extremely precise, stable magnetic fields are required for guiding, deflecting and focussing electron and positron beams in the DORIS intersecting storage ring of the German Electron Synchrotron DESY. For the magnets producing these fields, Siemens has supplied a total of 29 precision-controlled power supplies in 17 different versions ranging from 1.5 kW to 4.9 kW. (orig.) [de

Special Inspector General for Iraq Reconstruction (SIGIR): Moving Beyond the IRRF

Science.gov (United States)

2007-04-30

SCREEN 60” INSTANT CINEMA PROJECTION SCREEN ITEM# 20022351 SYTLES#: 60300 $12,750.00 $12,750.00 $0.00 CEFMS ISFF2 4/2/2007 3800 W91GY0-07-M-0163-NA-4...Generation: Baiji Gas 3&4 (318 MW – consisting of two Siemens 159 MW generators) Start Date: 11/24/2003 26 Back-Up Generators: 200 MW ( Japanese

Design of the combustion system for the SGT5-8000H and first experiences in the Irsching power plant

Energy Technology Data Exchange (ETDEWEB)

Huth, Michael; Gruschka, Uwe; Janus, Bertram; Meisl, Juergen [Siemens AG, Energy Sector, Muelheim an der Ruhr (Germany); Wasif, Sam [Siemens Power Generation Inc., Energy Sector, Orlando, FL (United States)

2009-07-01

The lean premixed combustion system for the new SGT5-8000H 50Hz H-class engine was scaled from the smaller Siemens 60Hz F-class engine. The paper describes the combustion system in more details and the testing methodology including six sigma approaches. First experiences with SGT5-8000H Prototype-Engine in the Irsching power plant are summarised. (orig.)

Clinical application of domestica manufactured BHP6601 SPECT

International Nuclear Information System (INIS)

Zhang Shuwen; Tian Jiahe; Liu Zilai; He Yijie; Shao Mingzhe; Zhang Jinming

2005-01-01

Clinical imaging of 150 patients with varying demand is carried out with BHP6601 SPECT manufactured locally, and the results are compared with that obtained by an E. CAM system manufactured by Siemens. The results show that BHP6601 had an acceptable and stable performance from a technical point of view. It offers a sufficient ability for organ imaging of clinical requirement. (authors)

Nuclear energy is promising

International Nuclear Information System (INIS)

Spitz, H.

2000-02-01

This document summarizes the different talks given by the participants to the winter meeting on nuclear energy which took place in Germany on January 27 and 28 2000. Representatives of the following companies and organisations attended the meeting: Deutsches Atomforum e.V., Bayernwerk AG, IG Bergau, Chemie und Energie, Siemens AG - energy production, VEBA AG and one public opinion poll institute. (J.S.)

Digital processing data communication systems (bus systems). Digitale Prozessdaten-Kommunikations-Systeme (Bus Systeme)

Energy Technology Data Exchange (ETDEWEB)

Fleck, K

1980-01-01

After an introduction to the technology of digital processing data communication systems there are the following chapters: digital communication of processing data in automation technology, the technology of biserial communication, the implementaiton of a bus system, the data transmission of the TDC-2000 system of Honeywell's and the process bus CS 275 in the automation system TELEPERM M of Siemens AG.

Method for determining the wedge angle from the daily measurements made with the measurement enabled devices DC6; Metodo para la determinacion del angulo de cuna a partir de las medidas diarias realizadas con el dispositio de medida QC6

Energy Technology Data Exchange (ETDEWEB)

Marques Fraguela, E.; Suero Rodrigo, M. A.

2011-07-01

The aim of this paper is to present a method for determining the angle of the wedges virtual electron linear accelerator (ALE) Siemens Primus, from the daily measurements made with the measurement system PTW-QC6Plus and found to be sufficiently sensitive to determine variations of {+-} 1 of this parameter. In addition, we study the behavior statistically CUFLE angle over a year.

On the feasibility of a CANDU PHWR actinide burner

International Nuclear Information System (INIS)

Anton, V.

1995-01-01

In this work a review of the current solutions to burn the actinide i.e. the spallation method, LWR, FBR, Siemens proposal and inert matrix is presented. Finally, a proposal is made to use the CANDU PHWR for this purpose, taking into account the techniques envisaged for LWR and the prospect of the advanced fuel cycle in CANDU system. (Author) 5 Refs

Advanced I and C systems for nuclear power plants feedback of experience

International Nuclear Information System (INIS)

Prehler, H.J.

2001-01-01

Advanced I and C systems for nuclear power plants have to meet increasing demands for safety and availability. Additionally specific requirements arising from nuclear qualification have to be fulfilled. To meet both subjects adequately in the future, Siemens has developed advanced I and C technology consisting of the two complementary I and C systems TELEPERM XP and TELEPERM XS.(author)

Comparative spect and planar gamma-camera examinations with 2-methoxy-isobutyl-isonitrile and tertier-butyl-isonitrile radiopharmaceuticals labelled with 99mTc on postinfarction patients

International Nuclear Information System (INIS)

Horvath, M.; Pszota, A.; Karman, M.; Szalai, M.; Nemeth, L.; Koernyei, J.

1990-01-01

The TBI kit is harmless, the labelling easy, but the TBI can be used only with SPECT because of its high hepatic uptake and slower clearance than that of MIBI. Nevertheless the SPECT with dedicated Ketronic-Siemens Medax N programme could correct the hepatic overlap within the inferior region, but the posterior defect appeared more pronounced than with Tl. (author) 5 figs

Digital processing data communication systems (bus systems)

International Nuclear Information System (INIS)

Fleck, K.

1980-01-01

After an introduction to the technology of digital processing data communication systems there are the following chapters: digital communication of processing data in automation technology, the technology of biserial communication, the implementaiton of a bus system, the data transmission of the TDC-2000 system of Honeywell's and the process bus CS 275 in the automation system TELEPERM M of Siemens AG. (WB) [de

Geophysical Imaging for Investigating the Delivery and Distribution of Amendments in the Heterogeneous Subsurface of the F.E. Warren AFB

Science.gov (United States)

2012-12-01

grain-fluid interface (Revil and Glover 1997, 1998). The electrical current distribution can be visualized by equipotential surfaces , with current flow...dimensional µg/L micrograms per liter µS/cm micro-Siemens per centimeter bgs below ground surface CERCLA Comprehensive Environmental Response...during, and after fracture emplacement using both surface and crosshole-based configurations. Several seismic methods were tested, including

A computer simulation of the transient response of a 4 cylinder Stirling engine with burner and air preheater in a vehicle

Science.gov (United States)

Martini, W. R.

1981-01-01

A series of computer programs are presented with full documentation which simulate the transient behavior of a modern 4 cylinder Siemens arrangement Stirling engine with burner and air preheater. Cold start, cranking, idling, acceleration through 3 gear changes and steady speed operation are simulated. Sample results and complete operating instructions are given. A full source code listing of all programs are included.

Femur length and biparietal diameter

African Journals Online (AJOL)

2014-12-02

Dec 2, 2014 ... A regression model for prediction of fetal age using the fetal biometry was also deduced ... done using a linear array real time ultrasound machine. Siemens Sonoline 1 with a 3.5 MHz transducer. ... values were regressed on GA using a simple linear equation. (y = a + b × GA). The 3rd, 5th, 10th, 50th, 90th, ...

West Europe Report, Science and Technology

Science.gov (United States)

1986-01-16

according to operational needs in discrete supplies at from 200 to 350 bars. Inventories of the propellants UDMH [unsymmetric dimethylhydrazine] and N5nü...Philips, Siemens and Thomson, on advanced microprocessors, gallium arsenide integrated circuits, microwave components, high- density memories, flat-panel...centers concerned must indicate their desire to associate and regroup themselves according to flexible formulas and variable configurations. In