Employee Housing: A Time for Reassessment.

Science.gov (United States)

Morrell, Louis R.

1987-01-01

One provision of the Tax Reform Act of 1986 states that when a tenant pays rent that is less than 5 percent of the appraised value of a property, the difference is considered taxable income for the employee. This provision is forcing colleges to reassess their employee housing policies. (MLW)

Role of adenosine receptors in caffeine tolerance

International Nuclear Information System (INIS)

Holtzman, S.G.; Mante, S.; Minneman, K.P.

1991-01-01

Caffeine is a competitive antagonist at adenosine receptors. Receptor up-regulation during chronic drug treatment has been proposed to be the mechanism of tolerance to the behavioral stimulant effects of caffeine. This study reassessed the role of adenosine receptors in caffeine tolerance. Separate groups of rats were given scheduled access to drinking bottles containing plain tap water or a 0.1% solution of caffeine. Daily drug intake averaged 60-75 mg/kg and resulted in complete tolerance to caffeine-induced stimulation of locomotor activity, which could not be surmounted by increasing the dose of caffeine. 5'-N-ethylcarboxamidoadenosine (0.001-1.0 mg/kg) dose dependently decreased the locomotor activity of caffeine-tolerant rats and their water-treated controls but was 8-fold more potent in the latter group. Caffeine (1.0-10 mg/kg) injected concurrently with 5-N-ethylcarboxamidoadenosine antagonized the decreases in locomotor activity comparably in both groups. Apparent pA2 values for tolerant and control rats also were comparable: 5.05 and 5.11. Thus, the adenosine-antagonist activity of caffeine was undiminished in tolerant rats. The effects of chronic caffeine administration on parameters of adenosine receptor binding and function were measured in cerebral cortex. There were no differences between brain tissue from control and caffeine-treated rats in number and affinity of adenosine binding sites or in receptor-mediated increases (A2 adenosine receptor) and decreases (A1 adenosine receptor) in cAMP accumulation. These results are consistent with theoretical arguments that changes in receptor density should not affect the potency of a competitive antagonist. Experimental evidence and theoretical considerations indicate that up-regulation of adenosine receptors is not the mechanism of tolerance to caffeine-induced stimulation of locomotor activity

Role of adenosine receptors in caffeine tolerance

Energy Technology Data Exchange (ETDEWEB)

Holtzman, S.G.; Mante, S.; Minneman, K.P. (Emory Univ. School of Medicine, Atlanta, GA (USA))

1991-01-01

Caffeine is a competitive antagonist at adenosine receptors. Receptor up-regulation during chronic drug treatment has been proposed to be the mechanism of tolerance to the behavioral stimulant effects of caffeine. This study reassessed the role of adenosine receptors in caffeine tolerance. Separate groups of rats were given scheduled access to drinking bottles containing plain tap water or a 0.1% solution of caffeine. Daily drug intake averaged 60-75 mg/kg and resulted in complete tolerance to caffeine-induced stimulation of locomotor activity, which could not be surmounted by increasing the dose of caffeine. 5'-N-ethylcarboxamidoadenosine (0.001-1.0 mg/kg) dose dependently decreased the locomotor activity of caffeine-tolerant rats and their water-treated controls but was 8-fold more potent in the latter group. Caffeine (1.0-10 mg/kg) injected concurrently with 5-N-ethylcarboxamidoadenosine antagonized the decreases in locomotor activity comparably in both groups. Apparent pA2 values for tolerant and control rats also were comparable: 5.05 and 5.11. Thus, the adenosine-antagonist activity of caffeine was undiminished in tolerant rats. The effects of chronic caffeine administration on parameters of adenosine receptor binding and function were measured in cerebral cortex. There were no differences between brain tissue from control and caffeine-treated rats in number and affinity of adenosine binding sites or in receptor-mediated increases (A2 adenosine receptor) and decreases (A1 adenosine receptor) in cAMP accumulation. These results are consistent with theoretical arguments that changes in receptor density should not affect the potency of a competitive antagonist. Experimental evidence and theoretical considerations indicate that up-regulation of adenosine receptors is not the mechanism of tolerance to caffeine-induced stimulation of locomotor activity.

BAYESIAN DATA AUGMENTATION DOSE FINDING WITH CONTINUAL REASSESSMENT METHOD AND DELAYED TOXICITY

Science.gov (United States)

Liu, Suyu; Yin, Guosheng; Yuan, Ying

2014-01-01

A major practical impediment when implementing adaptive dose-finding designs is that the toxicity outcome used by the decision rules may not be observed shortly after the initiation of the treatment. To address this issue, we propose the data augmentation continual re-assessment method (DA-CRM) for dose finding. By naturally treating the unobserved toxicities as missing data, we show that such missing data are nonignorable in the sense that the missingness depends on the unobserved outcomes. The Bayesian data augmentation approach is used to sample both the missing data and model parameters from their posterior full conditional distributions. We evaluate the performance of the DA-CRM through extensive simulation studies, and also compare it with other existing methods. The results show that the proposed design satisfactorily resolves the issues related to late-onset toxicities and possesses desirable operating characteristics: treating patients more safely, and also selecting the maximum tolerated dose with a higher probability. The new DA-CRM is illustrated with two phase I cancer clinical trials. PMID:24707327

The seismic reassessment Mochovce NPP

International Nuclear Information System (INIS)

Baumeister, P.

2004-01-01

The design of Mochovce NPP was based on the Novo-Voronez type WWER-440/213 reactor - twin units. Seismic characteristic of this region is characterized by very low activity. Mochovce NPP site is located on the rock soil with volcanic layer (andesit). Seismic reassessment of Mochovce NPP was done in two steps: deterministic approach up to commissioning confirmed value Horizontal Peak Ground Acceleration HPGA=0.1 g and activities after commissioning as a consequence of the IAEA mission indicate higher hazard values. (author)

Severe accident source term reassessment

International Nuclear Information System (INIS)

Hazzan, M.J.; Gardner, R.; Warman, E.A.; Jacobs, S.B.

1987-01-01

This paper summarizes the status of the reassessment of severe reactor accident source terms, which are defined as the quantity, type, and timing of fission product releases from such accidents. Concentration is on the major results and conclusions of analyses with modern methods for both pressurized water reactors (PWRs) and boiling water reactors (BWRs), and the special case of containment bypass. Some distinctions are drawn between analyses for PWRs and BWRs. In general, the more the matter is examined, the consequences, or probability of serious consequences, seem to be less. (author)

DOE reassesses civilian radioactive waste management program

International Nuclear Information System (INIS)

Yates, M.

1990-01-01

This article reports on the announcement by the Department of Energy (DOE) that the opening of a high-level radioactive nuclear waste repository site will be delayed for seven years. The article discusses DOE's reassessment plan, the restructuring of the Office of Civilian Radioactive Waste Management, site access and evaluation, the Monitored Retrievable Storage Commission proposal, and the industry's response

Economic reassessment of energy technologies with risk-management techniques

International Nuclear Information System (INIS)

Mohr, Markus; Unger, Hermann

1999-01-01

A new approach for the reassessment of modern energy technologies is discussed. This mainly addresses renewable-energy systems, like photovoltaics or wind converters. A new number called the 'Marginal Energy Risk Price (MERP) for Hedging' is introduced. (Author)

[Clinical orientation and thought on several problems in post-marketed reassessment of traditional Chinese medicine].

Science.gov (United States)

Wang, Xin; Su, Xia; Yu, Jie; Xie, Yanming; Wang, Yongyan

2011-10-01

The post-marketed reassessment is an important link to ensure the safety and effectiveness of traditional chinese medicine. It is also the expansion and stretch of new drug evaluation. Through the systematic, standard, rigorous post-marketed reassessment, the enterprise can full access to drugs after listing the efficacy and safety information, evaluate the interests and risk of the drug and provide the scientific basis for the drug use. It can also provide timely, scientific technology basis for government health decisions, the enterprise marketing decision and public health security. This paper mainly discussed the thought on clinical orientation of traditional chinese medicine in the post-marketed reassessment and how to reach the goal through systematic consideration and overall plan.

Re-assessment of seismic loads in conjunction with periodic safety review

International Nuclear Information System (INIS)

Jonczyk, Josef

2002-01-01

The objective of this paper is the fundamental consideration of a safeguard-aim-oriented approach for use in the re-assessment of seismic events with regard to the periodic safety review (PSR) of nuclear power plants (NPP). The re-assessment aspects of site-specific design earthquakes (DEQ), specially the procedure for seismic hazard analysis, will not, however, be considered in detail here. The proposed assessment concept clearly presents a general approach for safety assessments. The approach is based on a successive screening review of components that are considered sufficiently earthquake-resistant. In this respect, the principle of maximum practical application of the design documentation has been considered in the re-assessment process. On the other hand, the safeguard-aim-oriented evaluation will also be applied with regard to whether the requirements of the safety regulations are fulfilled with respect to the safety goals. The review in conjunction with PSR does not, however, attempt to perform this under all technical aspects. Moreover, it is possible to make extensive use of experimental knowledge and engineering judgement with regard to the structural capacity behaviour in case of a seismic event. Compared with design procedures, however, this proposed approach differs from the one applied in licensing procedures, in which such assessment freedom will not usually be exhausted. (author)

LHCb Computing Resources: 2019 requests and reassessment of 2018 requests

CERN Document Server

Bozzi, Concezio

2017-01-01

This document presents the computing resources needed by LHCb in 2019 and a reassessment of the 2018 requests, as resulting from the current experience of Run2 data taking and minor changes in the LHCb computing model parameters.

77 FR 54402 - Dichlorvos (DDVP); Order Denying NRDC's Objections on Remand

Science.gov (United States)

2012-09-05

... ``special'' FQPA safety factors. vii. FQPA safety factor--decision-making guidance. In 2002, EPA issued...: Crop production (North American Industrial Classification System (NAICS) code 111), e.g., agricultural workers; greenhouse, nursery, and floriculture workers; farmers. Animal production (NAICS code 112), e.g...

ASTER cloud coverage reassessment using MODIS cloud mask products

Science.gov (United States)

Tonooka, Hideyuki; Omagari, Kunjuro; Yamamoto, Hirokazu; Tachikawa, Tetsushi; Fujita, Masaru; Paitaer, Zaoreguli

2010-10-01

In the Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER) Project, two kinds of algorithms are used for cloud assessment in Level-1 processing. The first algorithm based on the LANDSAT-5 TM Automatic Cloud Cover Assessment (ACCA) algorithm is used for a part of daytime scenes observed with only VNIR bands and all nighttime scenes, and the second algorithm based on the LANDSAT-7 ETM+ ACCA algorithm is used for most of daytime scenes observed with all spectral bands. However, the first algorithm does not work well for lack of some spectral bands sensitive to cloud detection, and the two algorithms have been less accurate over snow/ice covered areas since April 2008 when the SWIR subsystem developed troubles. In addition, they perform less well for some combinations of surface type and sun elevation angle. We, therefore, have developed the ASTER cloud coverage reassessment system using MODIS cloud mask (MOD35) products, and have reassessed cloud coverage for all ASTER archived scenes (>1.7 million scenes). All of the new cloud coverage data are included in Image Management System (IMS) databases of the ASTER Ground Data System (GDS) and NASA's Land Process Data Active Archive Center (LP DAAC) and used for ASTER product search by users, and cloud mask images are distributed to users through Internet. Daily upcoming scenes (about 400 scenes per day) are reassessed and inserted into the IMS databases in 5 to 7 days after each scene observation date. Some validation studies for the new cloud coverage data and some mission-related analyses using those data are also demonstrated in the present paper.

Assessing the decennial, reassessing the global

DEFF Research Database (Denmark)

Manners, Ian James

2013-01-01

in global politics by rethinking the nature of power and actorness in a globalizing, multilateralizing and multipolarizing era. To do this, the article assesses the past decade in terms of normative power engagement, internationalization and comparison. The article then argues that rethinking power...... and actorness involves reassessing global theory and pouvoir normatif in action. The article concludes by setting out three ways of developing the NPA in its second decade: macro-approach, meso-characterization and micro-analysis. Following the suggestion of Emanuel Adler, Barry Buzan and Tim Dunne, the article...

Reassessing Function Points

Directory of Open Access Journals (Sweden)

G.R. Finnie

1997-05-01

Full Text Available Accurate estimation of the size and development effort for software projects requires estimation models which can be used early enough in the development life cycle to be of practical value. Function Point Analysis (FPA has become possibly the most widely used estimation technique in practice. However the technique was developed in the data processing environment of the 1970's and, despite undergoing considerable reassessment and formalisation, still attracts criticism for the weighting scoring it employs and for the way in which the function point score is adapted for specific system characteristics. This paper reviews the validity of the weighting scheme and the value of adjusting for system characteristics by studying their effect in a sample of 299 software developments. In general the value adjustment scheme does not appear to cater for differences in productivity. The weighting scheme used to adjust system components in terms of being simple, average or complex also appears suspect and should be redesigned to provide a more realistic estimate of system functionality.

Political Socialization and Social Studies Education: Reassessing the Conventional Wisdom.

Science.gov (United States)

Nelson, Murry R.

1989-01-01

Critically examines the political socialization research over the past 30 years as to method, sample, size, and results. Reassesses studies that have been most cited and those that have been ignored. Raises questions about political socialization that have not been addressed or have been inadequately addressed. (KO)

Phototransfered thermoluminescence for dose reassessment in LiF:mg,ti , LiF: mg,Cu,p TL detectors

International Nuclear Information System (INIS)

Rodriguez Otazo, M.; Baly, L.

2001-01-01

Phototransfered Thermoluminescence (PTTL) from LiF:Mg,Ti (TLD-100) and LiF: Mg,Cu,P (GR-200) was studied at different conditions using different sources of UV light for dose reassessment purposes. The TL dosimeters were irradiated with 137Cs in the range 2 mGy to 100 mGy. The convenience of using PTTL for dose reassessment was analyzed

Health risks from dioxin and related compounds: evaluation of the EPA reassessment

National Research Council Canada - National Science Library

Committee on EPA's Exposure and Human Health Reassessment of TCDD and Related Compounds, National Research Council

Although the U.S. Environmental Protection Agency presented a comprehensive review of the scientific literature in its 2003 draft reassessment of the risks of dioxin, the agency did not sufficiently quantify...

Pesticides used in forest nursery management in the United States and the impact of the Food Quality Protection Act and other regulatory actions

Science.gov (United States)

Jesus A. Cota

2002-01-01

The Food Quality Protection Act (FQPA) of 1996 has placed new standards on the registration and regulation of pesticides intended to protect children. The most significant changed mandated by FQPA relate to the registration process termed the "Risk Cup." This approach to risk analysis has resulted in greater restrictions on the application of pesticides used...

Post-purchase reassessment and improvement of neuroendoscope holder: importance of physician-manufacturer communication.

Science.gov (United States)

Ogawa, Yoshikazu; Nakata, Yusuke; Tominaga, Teiji

2014-01-01

Modern medical management requires constant quality improvement of the various instruments used for surgical procedures. Higher quality, less complicated handling, and reduced maintenance are all desirable qualities. However, any improvements in instrumentation require that surgeons must clearly understand the application of the device by adherence to the manufacturer's instructions. The weakness of this one-way information flow depends on the low interest among medical personnel for post-purchase reassessment. Service industries have research departments to investigate the post-purchase behavior of customers, and service recovery is considered essential to retain customers after service failure. All service providers can suffer service failures, and even the best providers may make errors in delivering service. Such an approach has been increasingly adopted in the risk management at medical institutions. We report our clinical trials of the post-purchase reassessment and product improvement of surgical instrumentation. Medical personnel reassessed the use of a newly developed endoscope holder based on the manufacturer's manual and made recommendations for possible improvements, which were examined by the manufacturer. Simple but important improvement was achieved for reducing the instability and uncertainty of instrument fixation. This bi-directional post-purchase communication between medical personnel and manufacturers can improve risk management in medical institutions.

Busuioceanu, S.: Corporal immobilization reassessment accountancy and tax alternatives

Directory of Open Access Journals (Sweden)

Busuioceanu, S.

2012-01-01

Full Text Available The economic phenomena and process like the market evolution, the inflation and globalization have also triggered in accountancy the evolution from historical cost system to current cost. The corporal immobilization reassessment at the level of current cost must represent the real motivation to contribute to a truthful image of the patrimony and not a method of depreciating tax costs of economic operators.

EPA's National Reassessment of Contaminants in Fish from U.S. Rivers

Science.gov (United States)

Multiple EPA offices collaborated to conduct a reassessment of fish contamination in U.S. rivers as part of the Agency’s 2013-14 National Rivers and Streams Assessment (NRSA). This is the first national assessment of contamination in river fish that will generate probabili...

Reassessment of suicide attempters at home, shortly after discharge from hospital.

NARCIS (Netherlands)

Verwey, B.; Waarde, J.A. van; Bozdag, M.A.; Rooij, I.A.L.M. van; Beurs, E. de; Zitman, F.G.

2010-01-01

BACKGROUND: Assessment of suicide attempters in a general hospital may be influenced by the condition of the patient and the unfavorable circumstances of the hospital environment. AIMS: To determine whether the results of a reassessment at home shortly after discharge from hospital differ from the

Reassessing Pocho Poetics: Americo Paredes's Poetry and the (Trans) National Question

Science.gov (United States)

Olguin, B.V.

2005-01-01

Americo Paredes's first collection of poetry, Cantos de Adolescencia in 1937, alongside his second poetry anthology, Between Two Worlds in 1991 is examined. Paredes's discourses of Mexican American identity demand a reassessment of the pocho as an icon for Chicanao literary and cultural studies.

Reassessment of the technical bases for estimating source terms. Draft report for comment

International Nuclear Information System (INIS)

Silberberg, M.; Mitchell, J.A.; Meyer, R.O.; Pasedag, W.F.; Ryder, C.P.; Peabody, C.A.; Jankowski, M.W.

1985-07-01

NUREG-0956 describes the NRC staff and contractor efforts to reassess and update the agency's analytical procedures for estimating accident source terms for nuclear power plants. The effort included development of a new source term analytical procedure - a set of computer codes - that is intended to replace the methodology of the Reactor Safety Study (WASH-1400) and to be used in reassessing the use of TID-14844 assumptions (10 CFR 100). NUREG-0956 describes the development of these codes, the demonstration of the codes to calculate source terms for specific cases, the peer review of this work, some perspectives on the overall impact of new source terms on plant risks, the plans for related research projects, and the conclusions and recommendations resulting from the effort

Reassessment of the RERF dosimetry system - overview of the new dosimetry system DS02

International Nuclear Information System (INIS)

Young, R.W.

2003-01-01

This paper describes a major reassessment of the system used at the Radiation Effects Research Foundation (RERF) to determine radiation doses for atomic-bomb survivors. This effort has resolved the neutron discrepancy in RERF dosimetry, and has defined the parameters for a replacement system for survivor dose calculation. A Joint US-Japan Working Group undertook a comprehensive evaluation of the calculations that comprise the RERF dosimetry system and the measurements used to verify those calculations. During the course of this reassessment, the working groups, with members from American, German and Japanese universities and national laboratories, have recomputed all of the Hiroshima and Nagasaki radiation calculations, made fast-neutron and low-background thermal-neutron measurements, upgraded the calculation of the radiation shielding provided by terrain and large buildings, and conducted a comprehensive reassessment of all radiation measurements. The new calculations produced during this reassessment agree with both gamma and neutron measurements out to distances from the detonations at which in-situ measurements become indistinguishable from background, effectively resolving the long-standing neutron dose discrepancy. The calculations that produce this agreement are the basis for the new DS02 dosimetry system. New calculations and measurements confirmed the yield and epicenter for the Nagasaki detonation while refining both these values for Hiroshima. Current measurements and calculations confirm a 21-kiloton-yield for the Nagasaki bomb and a burst point to within two meters of previous assessments. In Hiroshima, the estimated yield has been increased from 15 kt to 16 kt and the epicenter has been repositioned 20 meters higher and 15 meters to the west. While these refined parameters make the dosimetry system more accurate and users of the system more confident in the results, the calculated dose to survivors will change only about ten percent

Thomas Hardy's Victorian Gothic: Reassessing Hardy's Fiction and His Gothic Sensibility.

Science.gov (United States)

Goldstein, Norma Walrath

Proposing that Thomas Hardy's fiction exhibits strong Gothic sensibilities which offer insight into his artistic vision and add to the power of his fiction, creating a new form of the Gothic, a Victorian Gothic, this dissertation reassesses the Gothic strains in Hardy's fiction. The dissertation is in eight chapters: (1) Introduction to Hardy's…

A review and re-assessment of sediment transport along the Goa Coast, India

Digital Repository Service at National Institute of Oceanography (India)

Kunte, P.D.; Wagle, B.G.; Yasuhiro Sugimori

Although, a variety of methods have been employed to determine sediment transport along Goa coast, India, the results differ in some sections. Fifteen studies have been reviewed, compared, re-assessed and a corrected shore drift map of the Goa coast...

49 CFR 192.943 - When can an operator deviate from these reassessment intervals?

Science.gov (United States)

2010-10-01

... (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.943 When can an operator deviate from these reassessment...

REASSESSEMENT, ACCOUNTING POLICY ON TANGIBLE PRESENTATION IN THE FINANCIAL STATEMENTS

OpenAIRE

Firescu Victoria

2013-01-01

This paper aims to present some important aspects of the decision revaluation of tangible assets in the financial statements of the Romanians companies .Reassessment of the assets shows special interest for the beneficiaries accounting information because only a suitable policy will lead to credibility assessment and relevant data financial statements of assets. Although there have been numerous concerns to find optimal pricing model, currently neither practitioners nor researchers have not r...

Horizontalists, verticalists, and structuralists: The theory of endogenous money reassessed

OpenAIRE

Palley, Thomas I.

2013-01-01

This paper uses the occasion of the twenty-fifth anniversary of Basil Moore’s book, Horizontalists and Verticalists, to reassess the theory of endogenous money. The paper distinguishes between horizontalists, verticalists, and structuralists. It argues Moore’s horizontalist representation of endogenous money was an over-simplification that discarded important enduring insights from monetary theory. The structuralist approach to endogenous money retains the basic insight that the money supply ...

Conformational and vibrational reassessment of solid paracetamol

Science.gov (United States)

Amado, Ana M.; Azevedo, Celeste; Ribeiro-Claro, Paulo J. A.

2017-08-01

This work provides an answer to the urge for a more detailed and accurate knowledge of the vibrational spectrum of the widely used analgesic/antipyretic drug commonly known as paracetamol. A comprehensive spectroscopic analysis - including infrared, Raman, and inelastic neutron scattering (INS) - is combined with a computational approach which takes account for the effects of intermolecular interactions in the solid state. This allows a full reassessment of the vibrational assignments for Paracetamol, thus preventing the propagation of incorrect data analysis and misassignments already found in the literature. In particular, the vibrational modes involving the hydrogen-bonded Nsbnd H and Osbnd H groups are correctly reallocated to bands shifted by up to 300 cm- 1 relatively to previous assignments.

Maximum type I error rate inflation from sample size reassessment when investigators are blind to treatment labels.

Science.gov (United States)

Żebrowska, Magdalena; Posch, Martin; Magirr, Dominic

2016-05-30

Consider a parallel group trial for the comparison of an experimental treatment to a control, where the second-stage sample size may depend on the blinded primary endpoint data as well as on additional blinded data from a secondary endpoint. For the setting of normally distributed endpoints, we demonstrate that this may lead to an inflation of the type I error rate if the null hypothesis holds for the primary but not the secondary endpoint. We derive upper bounds for the inflation of the type I error rate, both for trials that employ random allocation and for those that use block randomization. We illustrate the worst-case sample size reassessment rule in a case study. For both randomization strategies, the maximum type I error rate increases with the effect size in the secondary endpoint and the correlation between endpoints. The maximum inflation increases with smaller block sizes if information on the block size is used in the reassessment rule. Based on our findings, we do not question the well-established use of blinded sample size reassessment methods with nuisance parameter estimates computed from the blinded interim data of the primary endpoint. However, we demonstrate that the type I error rate control of these methods relies on the application of specific, binding, pre-planned and fully algorithmic sample size reassessment rules and does not extend to general or unplanned sample size adjustments based on blinded data. © 2015 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd. © 2015 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

A theoretical reassessment of microbial maintenance and implications for microbial ecology modeling.

Science.gov (United States)

Wang, Gangsheng; Post, Wilfred M

2012-09-01

We attempted to reconcile three microbial maintenance models (Herbert, Pirt, and Compromise) through a theoretical reassessment. We provided a rigorous proof that the true growth yield coefficient (Y(G)) is the ratio of the specific maintenance rate (a in Herbert) to the maintenance coefficient (m in Pirt). Other findings from this study include: (1) the Compromise model is identical to the Herbert for computing microbial growth and substrate consumption, but it expresses the dependence of maintenance on both microbial biomass and substrate; (2) the maximum specific growth rate in the Herbert (μ(max,H)) is higher than those in the other two models (μ(max,P) and μ(max,C)), and the difference is the physiological maintenance factor (m(q) = a); and (3) the overall maintenance coefficient (m(T)) is more sensitive to m(q) than to the specific growth rate (μ(G)) and Y(G). Our critical reassessment of microbial maintenance provides a new approach for quantifying some important components in soil microbial ecology models. © This article is a US government work and is in the public domain in the USA.

Stress state reassessment of Romanian offshore structures taking into account corrosion influence

Science.gov (United States)

Joavină, R.; Zăgan, S.; Zăgan, R.; Popa, M.

2017-08-01

Progressive degradation analysis for extraction or exploration offshore structure, with appraisal of failure potential and the causes that can be correlated with the service age, depends on the various sources of uncertainty that require particular attention in design, construction and exploitation phases. Romanian self erecting platforms are spatial lattice structures consist of tubular steel joints, forming a continuous system with an infinite number of dynamic degrees of freedom. Reassessment of a structure at fixed intervals of time, recorrelation of initial design elements with the actual situation encountered in location and with structural behaviour represents a major asset in lowering vulnerabilities of offshore structure. This paper proposes a comparative reassessment of the stress state for an offshore structure Gloria type, when leaving the shipyard and at the end of that interval corresponding to capital revision, taking into account sectional changes due to marine environment corrosion. The calculation was done using Newmark integration method on a 3D model, asses of the dynamic loads was made through probabilistic spectral method.

Reassessment and expansion, 1981-1991

Science.gov (United States)

Grey, J.

In this, the fourth and final decade under consideration for the special issue of Acta Astronautica, an overview of the 10-year span is given rather than a congress-by-congress summary as was appropriate for the opening decades of the federation's existence. The decade was characterized by debate over the frequency of congresses, reassessment of committee structure, improved relations with COSPAR, increasing membership and administrative changes. The ten International Astronautical congresses held during the final decade of this history are listed below noting their sequential numbers, the cities and years in which they took place and their themes: XXXII—Rome, 1981: Space: Mankind's Fourth Environment XXXIII—Paris, 1982: Space 2000 XXXIV—Budapest, 1983: Cooperation in Space XXXV—Lausanne, 1984: Space Benefits for All Nations XXXVI—Stockholm, 1985: Peaceful Space and Global Problems of Mankind XXXVII—Innsbruck, 1986: Space: New Opportunities for All People XXXVIII—Brighton, 1987: Thirty years of Progress in Space XXXIX—Bangalore, 1988: Space and Humanity XL—Malaga-Torremolinos, 1989: The Next Forty Years in Space XLI—Dresden, 1990: Space for Peace and Progress

A Reassessment of Marquesan Ochrosia and Rauvolfia (Apocynaceae) with two new combinations

OpenAIRE

Lorence, David; Butaud, Jean-François

2011-01-01

A reassessment of collections of Marquesan Apocynaceae assigned to the genera Neisosperma Raf., Ochrosia Juss., and Rauvolfia L. revealed that two nomenclatural changes are necessary: 1) transfer of Neisosperma brownii Fosberg & Sachet to the genus Ochrosia, as Ochrosia brownii (Fosberg & Sachet) Lorence & Butaud, comb. nov.,  and 2) transfer of Ochrosia nukuhivensis Fosberg & Sachet to Rauvolfia as  Rauvolfia nukuhivensis (Fosberg & Sachet) Lorence & Butaud,...

MO-F-CAMPUS-T-03: Data Driven Approaches for Determination of Treatment Table Tolerance Values for Record and Verification Systems

International Nuclear Information System (INIS)

Gupta, N; DiCostanzo, D; Fullenkamp, M

2015-01-01

Purpose: To determine appropriate couch tolerance values for modern radiotherapy linac R&V systems with indexed patient setup. Methods: Treatment table tolerance values have been the most difficult to lower, due to many factors including variations in patient positioning and differences in table tops between machines. We recently installed nine linacs with similar tables and started indexing every patient in our clinic. In this study we queried our R&V database and analyzed the deviation of couch position values from the acquired values at verification simulation for all patients treated with indexed positioning. Mean and standard deviations of daily setup deviations were computed in the longitudinal, lateral and vertical direction for 343 patient plans. The mean, median and standard error of the standard deviations across the whole patient population and for some disease sites were computed to determine tolerance values. Results: The plot of our couch deviation values showed a gaussian distribution, with some small deviations, corresponding to setup uncertainties on non-imaging days, and SRS/SRT/SBRT patients, as well as some large deviations which were spot checked and found to be corresponding to indexing errors that were overriden. Setting our tolerance values based on the median + 1 standard error resulted in tolerance values of 1cm lateral and longitudinal, and 0.5 cm vertical for all non- SRS/SRT/SBRT cases. Re-analizing the data, we found that about 92% of the treated fractions would be within these tolerance values (ignoring the mis-indexed patients). We also analyzed data for disease site based subpopulations and found no difference in the tolerance values that needed to be used. Conclusion: With the use of automation, auto-setup and other workflow efficiency tools being introduced into radiotherapy workflow, it is very essential to set table tolerances that allow safe treatments, but flag setup errors that need to be reassessed before treatments

MO-F-CAMPUS-T-03: Data Driven Approaches for Determination of Treatment Table Tolerance Values for Record and Verification Systems

Energy Technology Data Exchange (ETDEWEB)

Gupta, N; DiCostanzo, D; Fullenkamp, M [Ohio State University, Columbus, OH (United States)

2015-06-15

Purpose: To determine appropriate couch tolerance values for modern radiotherapy linac R&V systems with indexed patient setup. Methods: Treatment table tolerance values have been the most difficult to lower, due to many factors including variations in patient positioning and differences in table tops between machines. We recently installed nine linacs with similar tables and started indexing every patient in our clinic. In this study we queried our R&V database and analyzed the deviation of couch position values from the acquired values at verification simulation for all patients treated with indexed positioning. Mean and standard deviations of daily setup deviations were computed in the longitudinal, lateral and vertical direction for 343 patient plans. The mean, median and standard error of the standard deviations across the whole patient population and for some disease sites were computed to determine tolerance values. Results: The plot of our couch deviation values showed a gaussian distribution, with some small deviations, corresponding to setup uncertainties on non-imaging days, and SRS/SRT/SBRT patients, as well as some large deviations which were spot checked and found to be corresponding to indexing errors that were overriden. Setting our tolerance values based on the median + 1 standard error resulted in tolerance values of 1cm lateral and longitudinal, and 0.5 cm vertical for all non- SRS/SRT/SBRT cases. Re-analizing the data, we found that about 92% of the treated fractions would be within these tolerance values (ignoring the mis-indexed patients). We also analyzed data for disease site based subpopulations and found no difference in the tolerance values that needed to be used. Conclusion: With the use of automation, auto-setup and other workflow efficiency tools being introduced into radiotherapy workflow, it is very essential to set table tolerances that allow safe treatments, but flag setup errors that need to be reassessed before treatments.

LHCb Computing Resources: 2012 re-assessment, 2013 request and 2014 forecast

CERN Document Server

Graciani Diaz, Ricardo

2012-01-01

This note covers the following aspects: re-assessment of computing resource usage estimates for 2012 data-taking period, request of computing resource needs for 2013, and a first forecast of the 2014 needs, when restart of data-taking is foreseen. Estimates are based on 2011 experience, as well as on the results of a simulation of the computing model described in the document. Differences in the model and deviations in the estimates from previous presented results are stressed.

Safety re-assessment of AECL test and research reactors

International Nuclear Information System (INIS)

Winfield, D.J.

1990-01-01

Atomic Energy of Canada Limited currently has four operating engineering test/research reactors of various sizes and ages; a new isotope-production reactor Maple-X10, under construction at Chalk River Nuclear Laboratories (CRNL), and a heating demonstration reactor, SDR, undergoing high-power commissioning at Whiteshell Nuclear Research Establishment (WNRE). The company is also performing design studies of small reactors for hot water and electricity production. The older reactors are ZED-2, PTR, NRX, and NRU; these range in age from 42 years (NRX) to 29 years (ZED-2). Since 1984, limited-scope safety re-assessments have been underway on three of these reactors (ZED-2, NRX AND NRU). ZED-2 and PTR are operated by the Reactor Physics Branch; all other reactors are operated by the respective site Reactor Operations Branches. For the older reactors the original safety reports produced were entirely deterministic in nature and based on the design-basis accident concept. The limited scope safety re-assessments for these older reactors, carried out over the past 5 years, have comprised both quantitative probabilistic safety-assessment techniques, such as event tree and fault analysis, and/or qualitative techniques, such as failure mode and effect analysis. The technique used for an individual assessment was dependent upon the specific scope required. This paper discusses the types of analyses carried out, specific insights/recommendations resulting from the analysis, and the plan for future analysis. In addition, during the last four years safety assessments have been carried out on the new isotope-, heat-, and electricity-producing reactors, as part of the safety design review, commissioning and licensing activities

Reassessing the empirical relationship between the oil price and the dollar

International Nuclear Information System (INIS)

Coudert, Virginie; Mignon, Valérie

2016-01-01

This paper aims at reassessing the empirical relationship between the real price of oil and the U.S. dollar real effective exchange rate over the 1974–2015 period. We find that changes in both variables are now linked by a negative relationship, going from the dollar exchange rate to the real oil price. However, the same relationship is found positive when ending the sample in the mid-2000s, in line with the previous literature. To understand and investigate this evolution, we rely on a nonlinear, smooth transition regression model in which the oil price-dollar nexus depends on the dynamics followed by the U.S. currency. Our results show that the relationship is negative most of the times but turns positive when the dollar hits very high values, as in the early eighties. - Highlights: •We reassess the relationship between the real oil price and the dollar over the 1974–2015 period. •Changes in the two variables are linked by a negative relationship over the whole period. •The link between both variables is positive over the subsample ending in the mid-2000s. •We estimate a nonlinear model in which the oil price-dollar nexus depends on the evolution the dollar. •The relationship is negative most of the times, except when the dollar hits very high values.

LHCb Computing Resources: 2011 re-assessment, 2012 request and 2013 forecast

CERN Document Server

Graciani, R

2011-01-01

This note covers the following aspects: re-assessment of computing resource usage estimates for 2011 data taking period, request of computing resource needs for 2012 data taking period and a first forecast of the 2013 needs, when no data taking is foreseen. Estimates are based on 2010 experienced and last updates from LHC schedule, as well as on a new implementation of the computing model simulation tool. Differences in the model and deviations in the estimates from previous presented results are stressed.

Tapentadol versus tramadol in the management of low back pain in the emergency department: Impact of use on the need for reassessments.

Science.gov (United States)

Guillén-Astete, Carlos A; Cardona-Carballo, César; de la Casa-Resino, Cristina

2017-11-01

Nontraumatic musculoskeletal disorders are the main reason for presentation to the emergency department (ED), with rachialgia (back pain) being the most common reason to request medical assessment among them. This also generates the highest demand for reassessments due to poor pain control or onset of adverse reactions to the treatment prescribed in the initial assessment.A retrospective observational study based on usual clinical practice was conducted in patients attending the ED due to low back pain during a period of 24 months. The primary objective was to determine the demand for reassessments in the ED by these patients in the following 30 days, according to the type of therapeutic approach used in the initial assessment.A total of 732 patients who requested medical assessment due to back pain in the ED of our hospital were analyzed, 91 of whom were treated with tapentadol whereas 641 received another treatment. In the first month after the initial assessment, reassessments were less common in the tapentadol group; this difference was significant from days 8 to 15 (P = 0.001, odds ratio [OR] 0.252 with 95% confidence interval [CI] 0.100-0.635) and days 15 to 30 (P pain compared to those who did not receive it (P pain, tapentadol shows clear advantages over the other analgesics analyzed, in terms of pain control and less need for reassessments.

Seismic reassessment of the structures of the Tihange 1 nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Renard, J D [TRACTEBEL, Brussels (Belgium)

1993-07-01

This paper describes the assumptions and methods which were used for the initial seismic design of the first nuclear unit built at Tihange. After the description of the criteria and methods which were used for the seismic reassessment of this plant ten years after completion, it reports the special assumptions and the results of some special analyses that had to be made to justify the seismic safety of the structures of the plant.

Variation in soil aluminium tolerance genes is associated with local adaptation to soils at the Park Grass Experiment.

Science.gov (United States)

Gould, Billie; McCouch, Susan; Geber, Monica

2014-12-01

Studies of the wild grass Anthoxanthum odoratum at the long-term Park Grass Experiment (PGE, Harpenden, UK) document a well-known example of rapid plant evolution in response to environmental change. Repeated fertilizer applications have acidified the soil in some experimental plots over the past 150+ years, and Anthoxanthum subpopulations have quickly become locally adapted. Early reciprocal transplants showed subpopulation differentiation specifically in response to soil aluminium (Al) toxicity across the experiment, even at small (30 m) spatial scales. Almost 40 years after its original measurement, we reassessed the degree of local adaptation to soil Al at the PGE using updated phenotyping methods and identified genes with variation linked to the tolerance trait. Root growth assays show that plants are locally adapted to soil Al at both the seedling and adult growth stages, but to a smaller extent than previously inferred. Among a large suite of candidate loci that were previously shown to have Al-sensitive expression differences between sensitive and tolerant plants, three loci contained SNPs that are associated with both Al tolerance and soil acidity: an Al-sensitive malate transporter (ALMT), a tonoplast intrinsic protein (TIP) and the putative homolog of the rice cell-wall modification gene STAR1. Natural genetic variation at these loci is likely to have contributed to the recent rapid evolution at PGE. Continued study of Al tolerance variants in Anthoxanthum will allow us to test hypotheses about the nature and source of genetic variation that enables some species to adapt to soil acidification and other types of rapid environmental change. © 2014 John Wiley & Sons Ltd.

Chronic ethanol tolerance as a result of free-choice drinking in alcohol-preferring rats of the WHP line.

Science.gov (United States)

Dyr, Wanda; Taracha, Ewa

2012-01-01

The development of tolerance to alcohol with chronic consumption is an important criterion for an animal model of alcoholism and may be an important component of the genetic predisposition to alcoholism. The aim of this study was to determine whether the selectively bred Warsaw High Preferring (WHP) line of alcohol-preferring rats would develop behavioral and metabolic tolerance during the free-choice drinking of ethanol. Chronic tolerance to ethanol-induced sedation was tested. The loss of righting reflex (LRR) paradigm was used to record sleep duration in WHP rats. Ethanol (EtOH)-naive WHP rats received a single intraperitoneal (i.p.) injection of 5.0 g ethanol/kg body weight (b.w.), and sleep duration was measured. Subsequently, rats had access to a 10% ethanol solution under a free-choice condition with water and food for 12 weeks. After 12 weeks of the free-choice intake of ethanol, the rats received another single i.p. injection of 5.0 g ethanol/kg b.w., and sleep duration was reassessed. The blood alcohol content (BAC) for each rat was determined after an i.p. injection of 5 g/kg of ethanol in naive rats and again after chronic alcohol drinking at the time of recovery of the righting reflex (RR). The results showed that the mean ethanol intake was 9.14 g/kg/24 h, and both sleep duration and BAC were decreased after chronic ethanol intake. In conclusion, WHP rats exposed to alcohol by free-choice drinking across 12 weeks exhibited increased alcohol elimination rates. Studies have demonstrated that WHP rats after chronic free-choice drinking (12 weeks) of alcohol develop metabolic tolerance. Behavioral tolerance to ethanol was demonstrated by reduced sleep duration, but this decrease in sleep duration was not significant.

Toward reassessing data-deficient species.

Science.gov (United States)

Bland, Lucie M; Bielby, Jon; Kearney, Stephen; Orme, C David L; Watson, James E M; Collen, Ben

2017-06-01

One in 6 species (13,465 species) on the International Union for Conservation of Nature (IUCN) Red List is classified as data deficient due to lack of information on their taxonomy, population status, or impact of threats. Despite the chance that many are at high risk of extinction, data-deficient species are typically excluded from global and local conservation priorities, as well as funding schemes. The number of data-deficient species will greatly increase as the IUCN Red List becomes more inclusive of poorly known and speciose groups. A strategic approach is urgently needed to enhance the conservation value of data-deficient assessments. To develop this, we reviewed 2879 data-deficient assessments in 6 animal groups and identified 8 main justifications for assigning data-deficient status (type series, few records, old records, uncertain provenance, uncertain population status or distribution, uncertain threats, taxonomic uncertainty, and new species). Assigning a consistent set of justification tags (i.e., consistent assignment to assessment justifications) to species classified as data deficient is a simple way to achieve more strategic assessments. Such tags would clarify the causes of data deficiency; facilitate the prediction of extinction risk; facilitate comparisons of data deficiency among taxonomic groups; and help prioritize species for reassessment. With renewed efforts, it could be straightforward to prevent thousands of data-deficient species slipping unnoticed toward extinction. © 2016 Society for Conservation Biology.

The continual reassessment method: comparison of Bayesian stopping rules for dose-ranging studies.

Science.gov (United States)

Zohar, S; Chevret, S

2001-10-15

The continual reassessment method (CRM) provides a Bayesian estimation of the maximum tolerated dose (MTD) in phase I clinical trials and is also used to estimate the minimal efficacy dose (MED) in phase II clinical trials. In this paper we propose Bayesian stopping rules for the CRM, based on either posterior or predictive probability distributions that can be applied sequentially during the trial. These rules aim at early detection of either the mis-choice of dose range or a prefixed gain in the point estimate or accuracy of estimated probability of response associated with the MTD (or MED). They were compared through a simulation study under six situations that could represent the underlying unknown dose-response (either toxicity or failure) relationship, in terms of sample size, probability of correct selection and bias of the response probability associated to the MTD (or MED). Our results show that the stopping rules act correctly, with early stopping by using the two first rules based on the posterior distribution when the actual underlying dose-response relationship is far from that initially supposed, while the rules based on predictive gain functions provide a discontinuation of inclusions whatever the actual dose-response curve after 20 patients on average, that is, depending mostly on the accumulated data. The stopping rules were then applied to a data set from a dose-ranging phase II clinical trial aiming at estimating the MED dose of midazolam in the sedation of infants during cardiac catheterization. All these findings suggest the early use of the two first rules to detect a mis-choice of dose range, while they confirm the requirement of including at least 20 patients at the same dose to reach an accurate estimate of MTD (MED). A two-stage design is under study. Copyright 2001 John Wiley & Sons, Ltd.

Reassessing the Trade-off Hypothesis

DEFF Research Database (Denmark)

Rosas, Guillermo; Manzetti, Luigi

2015-01-01

Do economic conditions drive voters to punish politicians that tolerate corruption? Previous scholarly work contends that citizens in young democracies support corrupt governments that are capable of promoting good economic outcomes, the so-called trade-off hypothesis. We test this hypothesis based...

Reassessing the atmospheric oxidation mechanism of toluene

Science.gov (United States)

Ji, Yuemeng; Zhao, Jun; Terazono, Hajime; Misawa, Kentaro; Levitt, Nicholas P.; Li, Yixin; Lin, Yun; Peng, Jianfei; Wang, Yuan; Duan, Lian; Pan, Bowen; Zhang, Fang; Feng, Xidan; An, Taicheng; Marrero-Ortiz, Wilmarie; Secrest, Jeremiah; Zhang, Annie L.; Shibuya, Kazuhiko; Molina, Mario J.; Zhang, Renyi

2017-08-01

Photochemical oxidation of aromatic hydrocarbons leads to tropospheric ozone and secondary organic aerosol (SOA) formation, with profound implications for air quality, human health, and climate. Toluene is the most abundant aromatic compound under urban environments, but its detailed chemical oxidation mechanism remains uncertain. From combined laboratory experiments and quantum chemical calculations, we show a toluene oxidation mechanism that is different from the one adopted in current atmospheric models. Our experimental work indicates a larger-than-expected branching ratio for cresols, but a negligible formation of ring-opening products (e.g., methylglyoxal). Quantum chemical calculations also demonstrate that cresols are much more stable than their corresponding peroxy radicals, and, for the most favorable OH (ortho) addition, the pathway of H extraction by O2 to form the cresol proceeds with a smaller barrier than O2 addition to form the peroxy radical. Our results reveal that phenolic (rather than peroxy radical) formation represents the dominant pathway for toluene oxidation, highlighting the necessity to reassess its role in ozone and SOA formation in the atmosphere.

Tolerance

DEFF Research Database (Denmark)

Tønder, Lars

is linked to a different set of circumstances than the ones suggested by existing models in contemporary democratic theory. Reorienting the discussion of tolerance, the book raises the question of how to disclose new possibilities within our given context of affect and perception. Once we move away from......Tolerance: A Sensorial Orientation to Politics is an experiment in re-orientation. The book is based on the wager that tolerance exceeds the more prevalent images of self-restraint and repressive benevolence because neither precludes the possibility of a more “active tolerance” motivated...... by the desire to experiment and to become otherwise. The objective is to discuss what gets lost, conceptually as well as politically, when we neglect the subsistence of active tolerance within other practices of tolerance, and to develop a theory of active tolerance in which tolerance's mobilizing character...

Safety reassessment of the Paks NPP (the AGNES project)

Energy Technology Data Exchange (ETDEWEB)

Gado, J [Hungarian Academy of Sciences, Budapest (Hungary). Central Research Inst. for Physics; Bajsz, J; Cserhati, A; Elter, J [Paksi Atomeroemue Vallalat, Paks (Hungary); Hollo, E [Energiagazdalkodasi Intezet, Budapest (Hungary); Kovacs, K [EROTERV Engineering and Contractor Co (Hungary); Maroti, L [Hungarian Academy of Sciences, Budapest (Hungary). Central Research Inst. for Physics; Miko, S [Paksi Atomeroemue Vallalat, Paks (Hungary); Techy, Z [Energiagazdalkodasi Intezet, Budapest (Hungary); Vidovszky, I [Hungarian Academy of Sciences, Budapest (Hungary). Central Research Inst. for Physics

1996-12-31

The reassessment of the Paks NPP safety according to internationally recognized criteria of the Advanced General and New Evaluation of Safety (AGNES) project is outlined. The Paks NPP consists of four WWER-440/V-213 units. The following groups of analysis have been performed: system analysis and description; analysis of design basis accidents; severe accidents analysis; level 1 probabilistic safety analysis. Postulated accidents (PA) and Anticipated Operational Occurrences (AOO) are estimated in detail for the following initiating events: increase/decrease in secondary heat removal; decrease in primary coolant inventory; increase/decrease of reactor coolant inventory; reactivity and power distribution anomalies; analysis of transients with the failure of reactor scram (ATWS); pressurized thermal shock analyses. Severe accident analysis was made for the accidents on in-vessel phase and containment phase, for radioactive release and for accident management.

Safety reassessment of the Paks NPP (the AGNES project)

International Nuclear Information System (INIS)

Gado, J.; Hollo, E.; Kovacs, K.; Maroti, L.; Techy, Z.; Vidovszky, I.

1995-01-01

The reassessment of the Paks NPP safety according to internationally recognized criteria of the Advanced General and New Evaluation of Safety (AGNES) project is outlined. The Paks NPP consists of four WWER-440/V-213 units. The following groups of analysis have been performed: system analysis and description; analysis of design basis accidents; severe accidents analysis; level 1 probabilistic safety analysis. Postulated accidents (PA) and Anticipated Operational Occurrences (AOO) are estimated in detail for the following initiating events: increase/decrease in secondary heat removal; decrease in primary coolant inventory; increase/decrease of reactor coolant inventory; reactivity and power distribution anomalies; analysis of transients with the failure of reactor scram (ATWS); pressurized thermal shock analyses. Severe accident analysis was made for the accidents on in-vessel phase and containment phase, for radioactive release and for accident management

Review of the status of validation of the computer codes used in the severe accident source term reassessment study (BMI-2104)

International Nuclear Information System (INIS)

Kress, T.S.

1985-04-01

The determination of severe accident source terms must, by necessity it seems, rely heavily on the use of complex computer codes. Source term acceptability, therefore, rests on the assessed validity of such codes. Consequently, one element of NRC's recent efforts to reassess LWR severe accident source terms is to provide a review of the status of validation of the computer codes used in the reassessment. The results of this review is the subject of this document. The separate review documents compiled in this report were used as a resource along with the results of the BMI-2104 study by BCL and the QUEST study by SNL to arrive at a more-or-less independent appraisal of the status of source term modeling at this time

The effect of cryotherapy on nerve conduction velocity, pain threshold and pain tolerance.

Science.gov (United States)

Algafly, Amin A; George, Keith P

2007-06-01

To determine the impact of the application of cryotherapy on nerve conduction velocity (NCV), pain threshold (PTH) and pain tolerance (PTO). A within-subject experimental design; treatment ankle (cryotherapy) and control ankle (no cryotherapy). Hospital-based physiotherapy laboratory. A convenience sample of adult male sports players (n = 23). NCV of the tibial nerve via electromyogram as well as PTH and PTO via pressure algometer. All outcome measures were assessed at two sites served by the tibial nerve: one receiving cryotherapy and one not receiving cryotherapy. In the control ankle, NCV, PTH and PTO did not alter when reassessed. In the ankle receiving cryotherapy, NCV was significantly and progressively reduced as ankle skin temperature was reduced to 10 degrees C by a cumulative total of 32.8% (pCryotherapy led to an increased PTH and PTO at both assessment sites (pcryotherapy can increase PTH and PTO at the ankle and this was associated with a significant decrease in NCV. Reduced NCV at the ankle may be a mechanism by which cryotherapy achieves its clinical goals.

Improving the false-negative rate of CT in acute appendicitis-Reassessment of CT images by body imaging radiologists: A blinded prospective study

International Nuclear Information System (INIS)

Poortman, Pieter; Lohle, Paul N.M.; Schoemaker, Cees M.; Cuesta, Miguel A.; Oostvogel, Henk J.M.; Lange-de Klerk, Elly S.M. de; Hamming, Jaap F.

2010-01-01

Purpose: To compare the accuracy of computed tomography (CT) analyzed by individual radiology staff members and body imaging radiologists in a non-academic teaching hospital for the diagnosis of acute appendicitis. Patients and methods: In a prospective study 199 patients with suspected acute appendicitis were examined with unenhanced CT. CT images were pre-operatively analyzed by one of the 12 members of the radiology staff. In a later stage two body imaging radiologist reassessed all CT images without knowledge of the surgical findings and without knowledge of the primary CT diagnosis. The results, independently reported, were correlated with surgical and histopathologic findings. Results: In 132 patients (66%) acute appendicitis was found at surgery, in 67 patients (34%) a normal appendix was found. The sensitivity of the primary CT analysis and of the reassessment was 76% and 88%, respectively; the specificity was 84% and 87%; the positive predictive value was 90% and 93%; the negative predictive value was 64% and 78%; and the accuracy was 78% and 87%. Conclusion: Reassessment of CT images for acute appendicitis by body imaging radiologists results in a significant improvement of sensitivity, negative predictive value and accuracy. To prevent false-negative interpretation of CT images in acute appendicitis the expertise of the attending radiologist should be considered.

Improving the false-negative rate of CT in acute appendicitis-Reassessment of CT images by body imaging radiologists: A blinded prospective study

Energy Technology Data Exchange (ETDEWEB)

Poortman, Pieter [Department of Surgery, St Elisabeth Hospital, Tilburg (Netherlands)], E-mail: ppoortman@wlz.nl; Lohle, Paul N.M. [Department of Surgery, St Elisabeth Hospital, Tilburg (Netherlands)], E-mail: plohle@elisabeth.nl; Schoemaker, Cees M. [Department of Surgery, St Elisabeth Hospital, Tilburg (Netherlands)], E-mail: mcschoemaker@elisabeth.nl; Cuesta, Miguel A. [Department of Surgery, VU Medical Centre, Amsterdam (Netherlands)], E-mail: ma.cuesta@vumc.nl; Oostvogel, Henk J.M. [Department of Surgery, St Elisabeth Hospital, Tilburg (Netherlands)], E-mail: h.oostvogel@elisabeth.nl; Lange-de Klerk, Elly S.M. de [Department of Epidemiology and Biostatistics, VU Medical Centre, Amsterdam (Netherlands)], E-mail: esm.delange@vumc.nl; Hamming, Jaap F. [Department of Surgery, Leiden University Medical Centre (Netherlands)], E-mail: j.f.hamming@lumc.nl

2010-04-15

Purpose: To compare the accuracy of computed tomography (CT) analyzed by individual radiology staff members and body imaging radiologists in a non-academic teaching hospital for the diagnosis of acute appendicitis. Patients and methods: In a prospective study 199 patients with suspected acute appendicitis were examined with unenhanced CT. CT images were pre-operatively analyzed by one of the 12 members of the radiology staff. In a later stage two body imaging radiologist reassessed all CT images without knowledge of the surgical findings and without knowledge of the primary CT diagnosis. The results, independently reported, were correlated with surgical and histopathologic findings. Results: In 132 patients (66%) acute appendicitis was found at surgery, in 67 patients (34%) a normal appendix was found. The sensitivity of the primary CT analysis and of the reassessment was 76% and 88%, respectively; the specificity was 84% and 87%; the positive predictive value was 90% and 93%; the negative predictive value was 64% and 78%; and the accuracy was 78% and 87%. Conclusion: Reassessment of CT images for acute appendicitis by body imaging radiologists results in a significant improvement of sensitivity, negative predictive value and accuracy. To prevent false-negative interpretation of CT images in acute appendicitis the expertise of the attending radiologist should be considered.

Diffraction based overlay re-assessed

Science.gov (United States)

Leray, Philippe; Laidler, David; D'havé, Koen; Cheng, Shaunee

2011-03-01

In recent years, numerous authors have reported the advantages of Diffraction Based Overlay (DBO) over Image Based Overlay (IBO), mainly by comparison of metrology figures of merit such as TIS and TMU. Some have even gone as far as to say that DBO is the only viable overlay metrology technique for advanced technology nodes; 22nm and beyond. Typically the only reported drawback of DBO is the size of the required targets. This severely limits its effective use, when all critical layers of a product, including double patterned layers need to be measured, and in-die overlay measurements are required. In this paper we ask whether target size is the only limitation to the adoption of DBO for overlay characterization and control, or are there other metrics, which need to be considered. For example, overlay accuracy with respect to scanner baseline or on-product process overlay control? In this work, we critically re-assess the strengths and weaknesses of DBO for the applications of scanner baseline and on-product process layer overlay control. A comprehensive comparison is made to IBO. For on product process layer control we compare the performance on critical process layers; Gate, Contact and Metal. In particularly we focus on the response of the scanner to the corrections determined by each metrology technique for each process layer, as a measure of the accuracy. Our results show that to characterize an overlay metrology technique that is suitable for use in advanced technology nodes requires much more than just evaluating the conventional metrology metrics of TIS and TMU.

Reassessing the environmental context of the Aitape Skull - The oldest tsunami victim in the world?

Directory of Open Access Journals (Sweden)

James Goff

Full Text Available There is increasing recognition of the long-lasting effects of tsunamis on human populations. This is particularly notable along tectonically active coastlines with repeated inundations occurring over thousands of years. Given the often high death tolls reported from historical events though it is remarkable that so few human skeletal remains have been found in the numerous palaeotsunami deposits studied to date. The 1929 discovery of the Aitape Skull in northern Papua New Guinea and its inferred late Pleistocene age played an important role in discussions about the origins of humans in Australasia for over 25 years until it was more reliably radiocarbon dated to around 6000 years old. However, no similar attention has been given to reassessing the deposit in which it was found-a coastal mangrove swamp inundated by water from a shallow sea. With the benefit of knowledge gained from studies of the 1998 tsunami in the same area, we conclude that the skull was laid down in a tsunami deposit and as such may represent the oldest known tsunami victim in the world. These findings raise the question of whether other coastal archaeological sites with human skeletal remains would benefit from a re-assessment of their geological context.

A reassessment of the blood-brain barrier transport of large neutral amino acids during acute systemic inflammation in humans

DEFF Research Database (Denmark)

Dahl, Rasmus H; Berg, Ronan M G; Taudorf, Sarah

2018-01-01

We reassessed data from a previous study on the transcerebral net exchange of large neutral amino acids (LNAAs) using a novel mathematical model of blood-brain barrier (BBB) transport. The study included twelve healthy volunteers who received a 4-h intravenous lipopolysaccharide (LPS) infusion...

Reassessing Income and Deprivation Approaches to the Measurement of Poverty in the Republic of Ireland

OpenAIRE

Richard Layte; Brian Nolan; Christopher T. Whelan

2001-01-01

This paper reassesses the validity of a poverty measure combining relative income and non-monetary deprivation indicators, first developed and applied to Irish data for 1987, in the light of experience since then and current debates. A crucial issue is whether the measure has failed to capture fundamental changes in livings patterns and expectations. A range of analyses confirm that it continues to identify a set of households experiencing distinctive levels of generalised deprivation, eco...

Reassessment of calculation of effective dose equivalent for the CRCN-CO Environmental Radiological Monitoring Program

International Nuclear Information System (INIS)

Carneiro, L.B.; Dourado, M.A.; Barbosa, R.C.

2017-01-01

To reassess the calculations of the effective dose equivalent to obtain data of dosimetry and the accomplishment of the analysis comparing the data of several techniques that record doses of radiation originating from the cosmogenic and terrestrial contributions that make up the so-called background radiation. the basic information to be obtained is the contribution of the difference between the terrestrial dose equivalents, even the lowest concentration of primordial radionuclides, and that of the dose equivalent, deduced from TLD readings. (author)

Reassessment of calculation of effective dose equivalent for the CRCN-CO Environmental Radiological Monitoring Program

Energy Technology Data Exchange (ETDEWEB)

Carneiro, L.B.; Dourado, M.A.; Barbosa, R.C., E-mail: research.photonics@gmail.com [Centro Regional de Ciências Nucleares do Centro-Oeste (CRCN-CO/CNEN-GO), Abadia de Goiás, GO (Brazil)

2017-07-01

To reassess the calculations of the effective dose equivalent to obtain data of dosimetry and the accomplishment of the analysis comparing the data of several techniques that record doses of radiation originating from the cosmogenic and terrestrial contributions that make up the so-called background radiation. the basic information to be obtained is the contribution of the difference between the terrestrial dose equivalents, even the lowest concentration of primordial radionuclides, and that of the dose equivalent, deduced from TLD readings. (author)

A reassessment of Marquesan Ochrosia and Rauvolfia (Apocynaceae) with two new combinations.

Science.gov (United States)

Lorence, David H; Butaud, Jean-François

2011-01-01

A reassessment of collections of Marquesan Apocynaceae assigned to the genera Neisosperma Raf., Ochrosia Juss., and Rauvolfia L. revealed that two nomenclatural changes are necessary: 1) transfer of Neisosperma brownii Fosberg & Sachet to the genus Ochrosia, as Ochrosia brownii (Fosberg & Sachet) Lorence & Butaud, comb. nov., and 2) transfer of Ochrosia nukuhivensis Fosberg & Sachet to Rauvolfia as Rauvolfia nukuhivensis (Fosberg & Sachet) Lorence & Butaud, comb. nov. As a result, two species each of Ochrosia and Rauvolfia are recognized from the Marquesas Islands, all endemic. Recent field work has yielded important new data on their distribution, habitat, and conservation status. It is recommended that all four species should be added the IUCN Red List at the Critically Endangered (CR) category.

Tolerance

DEFF Research Database (Denmark)

Tønder, Lars

Tolerance: A Sensorial Orientation to Politics is an experiment in re-orientation. The book is based on the wager that tolerance exceeds the more prevalent images of self-restraint and repressive benevolence because neither precludes the possibility of a more “active tolerance” motivated by the d...... these alternatives by returning to the notion of tolerance as the endurance of pain, linking this notion to exemplars and theories relevant to the politics of multiculturalism, religious freedom, and free speech....

Raman analysis of cobalt blue pigment in blue and white porcelain: A reassessment

Science.gov (United States)

Jiang, Xiaochenyang; Ma, Yanying; Chen, Yue; Li, Yuanqiu; Ma, Qinglin; Zhang, Zhaoxia; Wang, Changsui; Yang, Yimin

2018-02-01

Cobalt blue is a famous pigment in human history. In the past decade it is widely reported that the cobalt aluminate has been detected in ancient ceramics as blue colorant in glaze, yet the acquired Raman spectra are incredibly different from that of synthesised references, necessitating a reassessment of such contradictory scenario with more accurate analytic strategies. In this study, micro-Raman spectroscopy (MRS) and scanning electron microscopy (SEM) in association with energy dispersive spectrometry (EDS) were performed on under-glaze cobalt pigments from one submerged blue and white porcelain shard dated from Wanli reign (1573-1620 CE) of Ming dynasty (1365-1644 CE) excavated at Nan'ao I shipwreck off the southern coast of China. The micro-structural inspection reveals that the pigment particles have characteristics of small account, tiny size, heterogeneously distribution, and more importantly, been completely enwrapped by well-developed anorthite crystals in the glaze, indicating that the signals recorded in previous publications are probably not from cobalt pigments themselves but from outside thickset anorthite shell. The further spectromicroscopic analyses confirm this presumption when the accurate spectra of cobalt aluminate pigment and surrounding anorthite were obtained separately with precise optical positioning. Accordingly, we reassess and clarify the previous Raman studies dedicated to cobalt blue pigment in ancient ceramics, e.g. cobalt blue in celadon glaze, and in turn demonstrate the superiority and necessity of coupling spectroscopic analysis with corresponding structure observation, especially in the characterization of pigments from complicated physico-chemical environment like antiquities. Thus, this study promotes a better understanding of Raman spectroscopy study of cobalt blue pigments in art and archaeology field.

Reassessment of the NRC's program for protecting allegers against retaliation

International Nuclear Information System (INIS)

1994-01-01

On July 6, 1993, the Nuclear Regulatory Commission's (NRC's) Executive Director for Operations established a review team to reassess the NRC's program for protecting allegers against retaliation. The team evaluated the current system, and solicited comments from various NRC offices, other Federal agencies, licensees, former allegers, and the public. This report is subject to agency review. The report summarizes current processes and gives an overview of current problems. It discusses: (1) ways in which licensees can promote a quality-conscious work environment, in which all employees feel free to raise concerns without fear of retaliation; (2) ways to improve the NRC's overall handling of allegations; (3) the NRC's involvement in the Department of Labor process; (4) related NRC enforcement practices; and (5) methods other than investigation and enforcement that may be useful in treating allegations of potential or actual discrimination. Recommendations are given in each area

A reassessment of Galileo radiation exposures in the Jupiter magnetosphere.

Science.gov (United States)

Atwell, William; Townsend, Lawrence; Miller, Thomas; Campbell, Christina

2005-01-01

Earlier particle experiments in the 1970s on Pioneer-10 and -11 and Voyager-1 and -2 provided Jupiter flyby particle data, which were used by Divine and Garrett to develop the first Jupiter trapped radiation environment model. This model was used to establish a baseline radiation effects design limit for the Galileo onboard electronics. Recently, Garrett et al. have developed an updated Galileo Interim Radiation Environment (GIRE) model based on Galileo electron data. In this paper, we have used the GIRE model to reassess the computed radiation exposures and dose effects for Galileo. The 34-orbit 'as flown' Galileo trajectory data and the updated GIRE model were used to compute the electron and proton spectra for each of the 34 orbits. The total ionisation doses of electrons and protons have been computed based on a parametric shielding configuration, and these results are compared with previously published results.

Reassessment of the succession of lactic acid bacteria in commercial cucumber fermentations and physiological and genomic features associated with their dominance

Science.gov (United States)

Current cucumber pickling practices differ significantly from those in the 1940s, when most of the microbiological studies of cucumber fermentations were completed, using culture dependent and biochemical testing. It is the objective of this study to conduct a compositional re-assessment of the micr...

History as a biomedical matter: recent reassessments of the first cases of Alzheimer's disease.

Science.gov (United States)

Keuck, Lara

2017-11-27

This paper examines medical scientists' accounts of their rediscoveries and reassessments of old materials. It looks at how historical patient files and brain samples of the first cases of Alzheimer's disease became reused as scientific objects of inquiry in the 1990s, when a genetic neuropathologist from Munich and a psychiatrist from Frankfurt lead searches for left-overs of Alzheimer's 'founder cases' from the 1900s. How and why did these researchers use historical methods, materials and narratives, and why did the biomedical community cherish their findings as valuable scientific facts about Alzheimer's disease? The paper approaches these questions by analysing how researchers conceptualised 'history' while backtracking and reassessing clinical and histological materials from the past. It elucidates six ways of conceptualising history as a biomedical matter: (1) scientific assessments of the past, i.e. natural scientific understandings of 'historical facts'; (2) history in biomedicine, e.g. uses of old histological collections in present day brain banks; (3) provenance research, e.g. applying historical methods to ensure the authenticity of brain samples; (4) technical biomedical history, e.g. reproducing original staining techniques to identify how old histological slides were made; (5) founding traditions, i.e. references to historical objects and persons within founding stories of scientific communities; and (6) priority debates, e.g. evaluating the role particular persons played in the discovery of a disease such as Alzheimer's. Against this background, the paper concludes with how the various ways of using and understanding 'history' were put forward to re-present historic cases as 'proto-types' for studying Alzheimer's disease in the present.

A reassessment of the Hypoglossum group (Delesseriaceae, Rhodophyta), with a critique of its genera

Science.gov (United States)

Wynne, M. J.

1988-09-01

A reassessment of the Hypoglossum group (Delesseriaceae, Rhodophyta), with a critique of its genera. Eight genera are assigned to the Hypoglossum Kützing, Phitymophora J. Agardh, Pseudobranchioglossum Bodard, and Zellera Martens. The circumscription of the group is emended to include forms with network-forming ( Zellera) an dspirally twisted ( Duckerella) thalli. The definition of the group is lalso modified to include members (e.g. some species of Hypoglossum) in which tetrasporangia are produced by primary cells as in the Caloglossa group. Exogenous branching, a distinguishing feature of the closely related Caloglossa group, never occurs in the Hypoglossum group.

A Reassessment of Marquesan Ochrosia and Rauvolfia (Apocynaceae with two new combinations

Directory of Open Access Journals (Sweden)

David Lorence

2011-07-01

Full Text Available A reassessment of collections of Marquesan Apocynaceae assigned to the genera Neisosperma Raf., Ochrosia Juss., and Rauvolfia L. revealed that two nomenclatural changes are necessary: 1 transfer of Neisosperma brownii Fosberg & Sachet to the genus Ochrosia, as Ochrosia brownii (Fosberg & Sachet Lorence & Butaud, comb. nov.,  and 2 transfer of Ochrosia nukuhivensis Fosberg & Sachet to Rauvolfia as  Rauvolfia nukuhivensis (Fosberg & Sachet Lorence & Butaud, comb. nov.  As a result, two species each of Ochrosia and Rauvolfia are recognized from the Marquesas Islands, all endemic. Recent field work has yielded important new data on their distribution, habitat, and conservation status. It is recommended that all four species should be added the IUCN Red List at the Critically Endangered (CR category.

Crafting tolerance

DEFF Research Database (Denmark)

Kirchner, Antje; Freitag, Markus; Rapp, Carolin

2011-01-01

Ongoing changes in social structures, orientation, and value systems confront us with the growing necessity to address and understand transforming patterns of tolerance as well as specific aspects, such as social tolerance. Based on hierarchical analyses of the latest World Values Survey (2005......–08) and national statistics for 28 countries, we assess both individual and contextual aspects that influence an individual's perception of different social groupings. Using a social tolerance index that captures personal attitudes toward these groupings, we present an institutional theory of social tolerance. Our...

A reassessment of Galileo radiation exposures in the Jupiter magnetosphere

International Nuclear Information System (INIS)

Atwell, W.; Townsend, L.; Miller, T.; Campbell, C.

2005-01-01

Earlier particle experiments in the 1970's on Pioneer-10 and -11 and Voyager-1 and -2 provided Jupiter flyby particle data, which were used by Divine and Garrett to develop the first Jupiter trapped radiation environment model. This model was used to establish a baseline radiation effects design limit for the Galileo onboard electronics. Recently, Garrett et al. have developed an updated Galileo Interim Radiation Environment (GIRE) model based on Galileo electron data. In this paper, we have used the GIRE model to reassess the computed radiation exposures and dose effects for Galileo. The 34-orbit 'as flown' Galileo trajectory data and the updated GIRE model were used to compute the electron and proton spectra for each of the 34 orbits. The total ionisation doses of electrons and protons have been computed based on a parametric shielding configuration, and these results are compared with previously published results. Published by Oxford Univ. Press. All right reserved. (authors)

Report: Opportunities to Improve Data Quality and Children’s Health through the Food Quality Protection Act

Science.gov (United States)

Report #2006-P-00009, January 10, 2006. To meet the requirements of FQPA, EPA instituted numerous data requirements designed to provide infants and children with better protection against the health risks of pesticides.

14C age reassessment of groundwater from the discharge zone due to cross-flow mixing in the deep confined aquifer

Science.gov (United States)

Mao, Xumei; Wang, Hua; Feng, Liang

2018-05-01

In a groundwater flow system, the age of groundwater should gradually increase from the recharge zone to the discharge zone within the same streamline. However, it is occasionally observed that the groundwater age becomes younger in the discharge zone in the piedmont alluvial plain, and the oldest age often appears in the middle of the plain. A new set of groundwater chemistry and isotopes was employed to reassess the groundwater 14C ages from the discharge zone in the North China Plain (NCP). Carbonate precipitation, organic matter oxidation and cross-flow mixing in the groundwater from the recharge zone to the discharge zone are recognized according to the corresponding changes of HCO3- (or DIC) and δ13C in the same streamline of the third aquifer of the NCP. The effects of carbonate precipitation and organic matter oxidation are calibrated with a 13C mixing model and DIC correction, but these corrected 14C ages seem unreasonable because they grow younger from the middle plain to the discharge zone in the NCP. The relationship of Cl- content and the recharge distance is used to estimate the expected Cl- content in the discharge zone, and ln(a14C)/Cl is proposed to correct the a14C in groundwater for the effect of cross-flow mixing. The 14C ages were reassessed with the corrected a14C due to the cross-flow mixing varying from 1.25 to 30.58 ka, and the groundwater becomes older gradually from the recharge zone to the discharge zone. The results suggest that the reassessed 14C ages are more reasonable for the groundwater from the discharge zone due to cross-flow mixing.

Reassessment of 239Pu on planchets from human urine samples at ultra-trace levels using Aridus-ICP-SFMS and AMS

International Nuclear Information System (INIS)

Hernandez-Mendoza, H.; Chamizo, E.; Delgado, A.; Garcia-Leon, M.; Yllera, A.

2012-01-01

New analytical methods developed at the facilities here, based on two ultra-sensitive mass spectrometry (MS) techniques, inductively coupled plasma sector field mass spectrometer with a desolvator system (Aridus-ICP-SFMS) and accelerator MS (AMS), have been applied in this work for the reassessment of 239 Pu in alpha spectrometry (AS) planchets corresponding to spiked human urine samples. The obtained 239 Pu minimum detectable activities (MDAs) values by Aridus-ICP-SFMS and AMS were 3 fg (∼6.92 μBq) and 0.4 fg (∼0.92 μBq), respectively, per sample, which are much better than those attainable by AS [50 fg (∼115.3 μBq) of 239 Pu per sample, approximately]. Therefore, it is demonstrated that the MS techniques employed in this work are very powerful tools for internal dosimetry studies in human urine samples, giving excellent results when the reassessment of AS planchets is needed (samples with a Pu concentration below or at the MDA levels measurable by AS). This work is the continuation of an article published in J. Anal. At. Spectrom. 25 (1410-1415) 2010. (authors)

Compromise and Toleration

DEFF Research Database (Denmark)

Rostbøll, Christian F.

Political compromise is akin to toleration, since both consist of an "agreement to disagree." Compromise and toleration also share a predicament of being regarded as ambiguous virtues that require of us to accept something we actually regard as wrong. However, we misunderstand the nature, justifi...... in compromise are more stringent than those for being tolerated. Still, the limits of compromise cannot be drawn to narrowly if it is to remain its value as a form of agreement that respects and embodies the differences of opinion in society.......Political compromise is akin to toleration, since both consist of an "agreement to disagree." Compromise and toleration also share a predicament of being regarded as ambiguous virtues that require of us to accept something we actually regard as wrong. However, we misunderstand the nature......, justification, and limits of compromise if we see it merely as a matter of toleration. While toleration is mainly a matter of accepting citizens' equal right to co-existence as subjects to law, political compromise includes the parties in making law – it makes them co-authors of law. Toleration entails...

Continual reassessment method for dose escalation clinical trials in oncology: a comparison of prior skeleton approaches using AZD3514 data.

Science.gov (United States)

James, Gareth D; Symeonides, Stefan N; Marshall, Jayne; Young, Julia; Clack, Glen

2016-08-31

The continual reassessment method (CRM) requires an underlying model of the dose-toxicity relationship ("prior skeleton") and there is limited guidance of what this should be when little is known about this association. In this manuscript the impact of applying the CRM with different prior skeleton approaches and the 3 + 3 method are compared in terms of ability to determine the true maximum tolerated dose (MTD) and number of patients allocated to sub-optimal and toxic doses. Post-hoc dose-escalation analyses on real-life clinical trial data on an early oncology compound (AZD3514), using the 3 + 3 method and CRM using six different prior skeleton approaches. All methods correctly identified the true MTD. The 3 + 3 method allocated six patients to both sub-optimal and toxic doses. All CRM approaches allocated four patients to sub-optimal doses. No patients were allocated to toxic doses from sigmoidal, two from conservative and five from other approaches. Prior skeletons for the CRM for phase 1 clinical trials are proposed in this manuscript and applied to a real clinical trial dataset. Highly accurate initial skeleton estimates may not be essential to determine the true MTD, and, as expected, all CRM methods out-performed the 3 + 3 method. There were differences in performance between skeletons. The choice of skeleton should depend on whether minimizing the number of patients allocated to suboptimal or toxic doses is more important. NCT01162395 , Trial date of first registration: July 13, 2010.

Recognition and Toleration

DEFF Research Database (Denmark)

Lægaard, Sune

2010-01-01

Recognition and toleration are ways of relating to the diversity characteristic of multicultural societies. The article concerns the possible meanings of toleration and recognition, and the conflict that is often claimed to exist between these two approaches to diversity. Different forms...... or interpretations of recognition and toleration are considered, confusing and problematic uses of the terms are noted, and the compatibility of toleration and recognition is discussed. The article argues that there is a range of legitimate and importantly different conceptions of both toleration and recognition...

Thermodynamic reassessment of the neodymium–gold binary system

Energy Technology Data Exchange (ETDEWEB)

Moustaine, D., E-mail: mostainedris@gmail.com; Mahdouk, K.

2016-07-15

Phase relationships in Nd–Au binary system have been thermodynamically assessed by means of the CALPHAD technique through Thermo–Calc software package based on the experiment information of phase equilibria and thermodynamic properties from the published literature data. The excess Gibbs energy functions of the solution phases including liquid, fcc-A1, bcc-A2, and dhcp were formulated with Redlich–Kister polynomial functions. The two–sublattice energy model was employed to describe the Nd{sub 14}Au{sub 51} phase which exhibits a homogeneity range. The intermetallic compounds Nd{sub 2}Au, NdAu, Nd{sub 3}Au{sub 4}, Nd{sub 17}Au{sub 36}, and NdAu{sub 6} were treated as stoichiometric phases. A set of self-consistent thermodynamic parameters formulating the Gibbs energy of various phases in the Nd–Au binary system were then obtained. A much better agreement was achieved between the calculated results and the reported experimental data. - Highlights: • The Nd–Au has been re-assessed using the latest experimental results. • The intermetallic compound Nd{sub 14}Au{sub 51} was treated by a two–sublattice model. • The errors of related modelling presented in previous articles have been modified. • A self–consistent thermodynamic description of the Nd–Au system was obtained.

Reassessing the improbability of a muscular crinoid stem

Science.gov (United States)

Gorzelak, Przemysław; Głuchowski, Edward; Salamon, Mariusz A.

2014-08-01

Muscular articulations in modern stalked crinoids are only present in the arms. Although it has been suggested that certain coiled-stemmed fossil taxa may have been functionally adapted to utilize muscles, evidence supporting this interpretation is lacking. Here, we use cathodoluminescence and SEM to reveal the skeletal microstructure of the enigmatic coiled-stemmed taxon Ammonicrinus (Flexibilia). Based on the well-established link between skeletal microstructure and the nature of infilling soft tissues in modern echinoderms, we reconstructed the palaeoanatomy of the Middle Devonian ammonicrinids. We show that their median columnals with elongated lateral columnal enclosure extensions (LCEE) have stereom microstructure unexpectedly resembling that in the crinoid muscular arm plates. In particular, large ligamentary facets, that are present on each side of a transverse ridge, are mainly comprised of fine galleried stereom that is indicative of the mutable collagenous tissues. In contrast, fine labyrinthic stereom, commonly associated with muscles, is situated in the periphery on each side of the surface of elongated LCEE. Our findings thus strongly suggest that the muscles may have also been present in the stem of ammonicrinids. These results reassess the previous hypotheses about evolution of muscles in crinoids and provide new insights into the mode of life of Ammonicrinus.

Teaching Tolerance? Associational Diversity and Tolerance Formation

DEFF Research Database (Denmark)

Rapp, Carolin; Freitag, Markus

2015-01-01

, a closer look is taken at how associational diversity relates to the formation of tolerance and the importance of associations as schools of tolerance are evaluated. The main theoretical argument follows contact theory, wherein regular and enduring contact in diverse settings reduces prejudice and thereby...

Mechanical tolerance stackup and analysis

CERN Document Server

Fischer, Bryan R

2004-01-01

BackgroundDimensioning and TolerancingTolerance Format and Decimal PlacesConverting Plus/Minus Dimensions and Tolerances into Equal Bilaterally Toleranced DimensionsVariation and Sources of VariationTolerance AnalysisWorst-case Tolerance StackupsStatistical Tolerance StackupsGeometric Dimensioning and Tolerancing (GD&T)Converting Plus/Minus Tolerancing to Positional Tolerancing and Projected Tolerance ZonesDiametral and Radial Tolerance StackupsSpecifying Material Condition Modifiers and Their Effect on Tolerance Stackups The Tolerance Stackup SketchThe Tolerance Stackup Report FormTolerance S

Reassessment of the NRC`s program for protecting allegers against retaliation

Energy Technology Data Exchange (ETDEWEB)

1994-01-01

On July 6, 1993, the Nuclear Regulatory Commission`s (NRC`s) Executive Director for Operations established a review team to reassess the NRC`s program for protecting allegers against retaliation. The team evaluated the current system, and solicited comments from various NRC offices, other Federal agencies, licensees, former allegers, and the public. This report is subject to agency review. The report summarizes current processes and gives an overview of current problems. It discusses: (1) ways in which licensees can promote a quality-conscious work environment, in which all employees feel free to raise concerns without fear of retaliation; (2) ways to improve the NRC`s overall handling of allegations; (3) the NRC`s involvement in the Department of Labor process; (4) related NRC enforcement practices; and (5) methods other than investigation and enforcement that may be useful in treating allegations of potential or actual discrimination. Recommendations are given in each area.

Tolerance to and cross tolerance between ethanol and nicotine.

Science.gov (United States)

Collins, A C; Burch, J B; de Fiebre, C M; Marks, M J

1988-02-01

Female DBA mice were subjected to one of four treatments: ethanol-containing or control diets, nicotine (0.2, 1.0, 5.0 mg/kg/hr) infusion or saline infusion. After removal from the liquid diets or cessation of infusion, the animals were challenged with an acute dose of ethanol or nicotine. Chronic ethanol-fed mice were tolerant to the effects of ethanol on body temperature and open field activity and were cross tolerant to the effects of nicotine on body temperature and heart rate. Nicotine infused animals were tolerant to the effects of nicotine on body temperature and rotarod performance and were cross tolerant to the effects of ethanol on body temperature. Ethanol-induced sleep time was decreased in chronic ethanol- but not chronic nicotine-treated mice. Chronic drug treatment did not alter the elimination rate of either drug. Chronic ethanol treatment did not alter the number or affinity of brain nicotinic receptors whereas chronic nicotine treatment elicited an increase in the number of [3H]-nicotine binding sites. Tolerance and cross tolerance between ethanol and nicotine is discussed in terms of potential effects on desensitization of brain nicotinic receptors.

Robust EM Continual Reassessment Method in Oncology Dose Finding

Science.gov (United States)

Yuan, Ying; Yin, Guosheng

2012-01-01

The continual reassessment method (CRM) is a commonly used dose-finding design for phase I clinical trials. Practical applications of this method have been restricted by two limitations: (1) the requirement that the toxicity outcome needs to be observed shortly after the initiation of the treatment; and (2) the potential sensitivity to the prespecified toxicity probability at each dose. To overcome these limitations, we naturally treat the unobserved toxicity outcomes as missing data, and use the expectation-maximization (EM) algorithm to estimate the dose toxicity probabilities based on the incomplete data to direct dose assignment. To enhance the robustness of the design, we propose prespecifying multiple sets of toxicity probabilities, each set corresponding to an individual CRM model. We carry out these multiple CRMs in parallel, across which model selection and model averaging procedures are used to make more robust inference. We evaluate the operating characteristics of the proposed robust EM-CRM designs through simulation studies and show that the proposed methods satisfactorily resolve both limitations of the CRM. Besides improving the MTD selection percentage, the new designs dramatically shorten the duration of the trial, and are robust to the prespecification of the toxicity probabilities. PMID:22375092

Remember Tolerance Differently

DEFF Research Database (Denmark)

Tønder, Lars

2012-01-01

This essay questions the linear conception of history which often accompanies the way contemporary democratic theory tends to disavow tolerance's discontinuities and remainders. In the spirit of Foucault's genealogy of descent, the idea is to develop a new sense of tolerance's history, not by inv......This essay questions the linear conception of history which often accompanies the way contemporary democratic theory tends to disavow tolerance's discontinuities and remainders. In the spirit of Foucault's genealogy of descent, the idea is to develop a new sense of tolerance's history......, not by invoking a critique external to contemporary democratic theory, but by witnessing the history of tolerance paraliptically, with an eye to what it obscures and yet presupposes....

Induced tolerance from a sublethal insecticide leads to cross-tolerance to other insecticides.

Science.gov (United States)

Hua, Jessica; Jones, Devin K; Relyea, Rick A

2014-04-01

As global pesticide use increases, the ability to rapidly respond to pesticides by increasing tolerance has important implications for the persistence of nontarget organisms. A recent study of larval amphibians discovered that increased tolerance can be induced by an early exposure to low concentrations of a pesticide. Since natural systems are often exposed to a variety of pesticides that vary in mode of action, we need to know whether the induction of increased tolerance to one pesticide confers increased tolerance to other pesticides. Using larval wood frogs (Lithobates sylvaticus), we investigated whether induction of increased tolerance to the insecticide carbaryl (AChE-inhibitor) can induce increased tolerance to other insecticides that have the same mode of action (chlorpyrifos, malathion) or a different mode of action (Na(+)channel-interfering insecticides; permethrin, cypermethrin). We found that embryonic exposure to sublethal concentrations of carbaryl induced higher tolerance to carbaryl and increased cross-tolerance to malathion and cypermethrin but not to chlorpyrifos or permethrin. In one case, the embryonic exposure to carbaryl induced tolerance in a nonlinear pattern (hormesis). These results demonstrate that that the newly discovered phenomenon of induced tolerance also provides induced cross-tolerance that is not restricted to pesticides with the same mode of action.

Value of post-operative reassessment of estrogen receptor α expression following neoadjuvant chemotherapy with or without gefitinib for estrogen receptor negative breast cancer

DEFF Research Database (Denmark)

Bernsdorf, Mogens; Balslev, Eva; Lykkesfeldt, Anne

2011-01-01

with indication of changed ER phenotype (based on collected pathology reports) were immunohistochemically reassessed centrally. 115 patients were eligible for this study; 59 patients in the gefitinib group and 56 patients in the placebo group. Five (4.3%) of 115 tumors changed ER phenotype from negative...

A reassessment of the early archaeological record at Leang Burung 2, a Late Pleistocene rock-shelter site on the Indonesian island of Sulawesi

NARCIS (Netherlands)

Brumm, Adam; Hakim, Budianto; Ramli, Muhammad; Aubert, Maxime; van den Bergh, Gerrit D.; Li, Bo; Burhan, Basran; Saiful, Andi Muhammad; Siagian, Linda; Sardi, Ratno; Jusdi, Andi; Said, Abdullah; Mubarak, Andi Pampang; Moore, Mark W.; Roberts, Richard G.; Zhao, Jian-xin; McGahan, David; Jones, Brian G.; Perston, Yinika; Szabó, Katherine; Mahmud, M. Irfan; Westaway, Kira; [Unknown], Jatmiko; Saptomo, E. Wahyu; van der Kaars, Sander; Grün, Rainer; Wood, Rachel; Dodson, John; Morwood, Michael J.

2018-01-01

This paper presents a reassessment of the archaeological record at Leang Burung 2, a key early human occupation site in the Late Pleistocene of Southeast Asia. Excavated originally by Ian Glover in 1975, this limestone rock-shelter in the Maros karsts of Sulawesi, Indonesia, has long held

Re-assessment of woodfuel supply and demand relationships in Kampong Thom Province, Cambodia

International Nuclear Information System (INIS)

Top, Neth; Ty, Sokhun; Mizoue, Nobuya; Ito, Satoshi; Kai, Shigetaka; Nakao, Toshio

2006-01-01

This study re-examined a previously published relationship between supply and demand for woodfuel at different spatial scales within Kampong Thom Province, Cambodia. We considered three different scales: The first was the whole area of the province. The second scale calculated village-scale data in zones of 1, 3, and 5km from each village and then aggregated for all villages of the province. The third scale also calculated data for the three zones at the village-scale, but the data were then aggregated according to three regional groupings based on population density and forest availability. When evaluating woodfuel supply, we excluded biomass increment of trees with diameter larger than 30cm because it was found that local people rarely collect trees larger than 30cm for fuel. On the demand side, dead wood, which was included in the previous assessment, and woodfuel obtained from non-forest sources were excluded to enable comparison of supply and demand that related only to living trees originating from forests. The re-assessment revealed large decreases in both supply and demand at each scale as compared with our previous assessment; supply reduced by 46% and demand by 36% at the whole province scale. However, the ratios of supply to demand at each scale examined were very similar for both assessments. This re-assessment therefore supports our previous findings: there is a deficiency in woodfuel resources in areas of high population density along the main road due to high woodfuel demand and a predominance of agricultural land and regrowth forest in close proximity to villages. This study underscores the usefulness of taking detailed woodfuel consumption patterns into account when assessing the impact of woodfuel demand on forests. For a more accurate assessment on the sustainability of woodfuel resources and utilization, further research is needed to project future woodfuel demand, not only for green wood from forested sources, but also for dead wood and

ASSESSING CHILDREN'S EXPOSURES TO PESTICIDES: AN IMPORTANT APPLICATION OF THE STOCHASTIC HUMAN EXPOSURE AND DOSE SIMULATION MODEL (SHEDS)

Science.gov (United States)

Accurately quantifying human exposures and doses of various populations to environmental pollutants is critical for the Agency to assess and manage human health risks. For example, the Food Quality Protection Act of 1996 (FQPA) requires EPA to consider aggregate human exposure ...

Reassessing Coxcatlan Cave and the early history of domesticated plants in Mesoamerica.

Science.gov (United States)

Smith, Bruce D

2005-07-05

Reanalysis and direct accelerator mass spectrometry radiocarbon dating of the cucurbit assemblage from Coxcatlan Cave provide information on the timing and sequence of the initial appearance of three domesticated plants in the Tehuacán Valley (Puebla, Mexico) and allow reassessment of the overall temporal context of plant domestication in Mexico. Cucurbita pepo is the earliest documented domesticate in the cave, dating to 7,920 calibrated calendrical (cal) years B.P. The bottle gourd (Lagenaria siceraria) is dated at 7,200 cal years B.P. Cucurbita argyrosperma does not appear until 2,065 cal years B.P. The earlier identification of Cucurbita moschata specimens is not confirmed. Seventy-one radiocarbon dates, including 23 accelerator mass spectrometry dates on cucurbits, provide ample evidence of postdepositional vertical displacement of organic materials in the western half of Coxcatlan Cave, but they also indicate that the eastern half of the cave was largely undisturbed.

Cumulative reproductive effects of in utero administration of mixtures of antiandrogens in male SD rats: synergy or additivity?

Science.gov (United States)

In 1996 the USEPA was charged under the FQPA to consider the cumulative effects of chemicals in their risk assessments. Our studies were conducted to provide a framework for assessing the cumulative effects of antiandrogens. Toxicants were administered individually or as mixtures...

76 FR 12967 - Agency Information Collection Activities; Proposed Collection; Comment Request; Channels of Trade...

Science.gov (United States)

2011-03-09

...] Agency Information Collection Activities; Proposed Collection; Comment Request; Channels of Trade Policy...)--Extension The Food Quality Protection Act of 1996 (FQPA), which amended the Federal Insecticide, Fungicide... Burden \\1\\ Annual Activity No. of frequency per Total annual Hours per Total hours respondents response...

Fault Tolerant Feedback Control

DEFF Research Database (Denmark)

Stoustrup, Jakob; Niemann, H.

2001-01-01

An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....

Phylogenomic re-assessment of the thermophilic genus Geobacillus.

Science.gov (United States)

Aliyu, Habibu; Lebre, Pedro; Blom, Jochen; Cowan, Don; De Maayer, Pieter

2016-12-01

Geobacillus is a genus of Gram-positive, aerobic, spore-forming obligate thermophiles. The descriptions and subsequent affiliations of the species in the genus have mostly been based on polyphasic taxonomy rules that include traditional sequence-based methods such as DNA-DNA hybridization and comparison of 16S rRNA gene sequences. Currently, there are fifteen validly described species within the genus. The availability of whole genome sequences has provided an opportunity to validate and/or re-assess these conventional estimates of genome relatedness. We have applied whole genome approaches to estimate the phylogenetic relatedness among the sixty-three Geobacillus strains for which genome sequences are currently publicly available, including the type strains of eleven validly described species. The phylogenomic metrics AAI (Average Amino acid Identity), ANI (Average Nucleotide Identity) and dDDH (digital DNA-DNA hybridization) indicated that the current genus Geobacillus is comprised of sixteen distinct genomospecies, including several potentially novel species. Furthermore, a phylogeny constructed on the basis of the core genes identified from the whole genome analyses indicated that the genus clusters into two monophyletic clades that clearly differ in terms of nucleotide base composition. The G+C content ranges for clade I and II were 48.8-53.1% and 42.1-44.4%, respectively. We therefore suggest that the Geobacillus species currently residing within clade II be considered as a new genus. Copyright © 2016 Elsevier GmbH. All rights reserved.

Melanin fate in the human epidermis: a reassessment of how best to detect and analyse histologically.

Science.gov (United States)

Joly-Tonetti, Nicolas; Wibawa, Judata I D; Bell, Mike; Tobin, Desmond

2016-07-01

Melanin is the predominant pigment responsible for skin colour and is synthesized by the melanocyte in the basal layer of the epidermis and then transferred to surrounding keratinocytes. Despite its optical properties, melanin is barely detectable in unstained sections of human epidermis. However, identification and localization of melanin is of importance for the study of skin pigmentation in health and disease. Current methods for the histologic quantification of melanin are suboptimal and are associated with significant risk of misinterpretation. The aim of this study was to reassess the existing literature and to develop a more effective histological method of melanin quantification in human skin. Moreover, we confirm that Warthin-Starry (WS) stain provides a much more sensitive and more specific melanin detection method than the commonplace Fontana-Masson (FM) stain. For example, WS staining sensitivity allowed the visualization of melanin even in very pale Caucasian skin that was missed by FM or Von Kossa (VK) stains. From our reassessment of the histology-related literature, we conclude that so-called melanin dust is most likely an artifact of discoloration due to non-specific silver deposition in the stratum corneum. Unlike FM and VK, WS was not associated with this non-specific stratum corneum darkening, misinterpreted previously as 'degraded' melanin. Finally, WS melanin particle counts were largely similar to previously reported manual counts by transmission electron microscopy, in contrast to both FM and VK. Together these findings allow us to propose a new histology/Image J-informed method for the accurate and precise quantification of epidermal melanin in skin. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Reassessment of 50 years of seismicity in Simav-Gediz grabens (Western Turkey), based on earthquake relocations

Science.gov (United States)

Karasozen, E.; Nissen, E.; Bergman, E. A.; Walters, R. J.

2013-12-01

Western Turkey is a rapidly deforming region with a long history of high-magnitude normal faulting earthquakes. However, the locations and slip rates of the responsible faults are poorly constrained. Here, we reassess a series of large instrumental earthquakes in the Simav-Gediz region, an area exhibiting a strong E-W gradient in N-S extension rates, from low rates bordering the Anatolian Plateau to much higher rates in the west. We start with investigating a recent Mw 5.9 earthquake at Simav (19 May 2011) using InSAR, teleseismic body-wave modeling and field observations. Next, we exploit the small but clear InSAR signal to relocate a series of older, larger earthquakes, using a calibrated earthquake relocation method which is based on the hypocentroidial decomposition (HDC) method for multiple event relocation. These improved locations in turn provide an opportunity to reassess the regional style of deformation. One interesting aspect of these earthquakes is that the largest (the Mw 7.2 Gediz earthquake, March 1970) occurred in an area of slow extension and indistinct surface faulting, whilst the well-defined and more rapidly extending Simav graben has ruptured in several smaller, Mw 6 events. However, our relocations highlight the existence of a significant gap in instrumental earthquakes along the central Simav graben, which, if it ruptured in a single event, could equal ~Mw 7. We were unable to identify fault scarps along this section due to dense vegetation and human modification, and we suggest that acquiring LiDAR data in this area should be a high priority in order to properly investigate earthquake hazard in the Simav graben.

Toleration out of respect?

DEFF Research Database (Denmark)

Lægaard, Sune

2013-01-01

Under conditions of pluralism different cultures, interests or values can come into conflict, which raises the problem of how to secure peaceful co-existence. The idea of toleration historically emerged as an answer to this problem. Recently Rainer Forst has argued that toleration should not just...... be based on a modus vivendi designed to secure peaceful co-existence, but should be based on moral reasons. Forst therefore advances what he calls the ‘respect conception’ of toleration as an in itself morally desirable type of relationship, which is furthermore the only conception of toleration...... that avoids various so-called ‘paradoxes of toleration’. The paper first examines whether Forst’s respect conception can be applied descriptively to distinguish between actual patterns of behaviour and classify different acts of toleration. Then the focus is shifted to toleration out of respect as a normative...

The political limit of tolerance O limite político da tolerância

Directory of Open Access Journals (Sweden)

Joseph Yvon Thériault

2008-06-01

Full Text Available In the contemporary discussions about democracy modifications, tolerance has been frequently evoked in order to express the way by which the democracies respond to the new demands of plurality recognition. While drawing the general lines of the connection between tolerance and democracy, the present article intends to deepen the comprehension of tolerance’s places and limits inside the democracy. After that, the text should evaluate the reach of the contemporary use of tolerance. Keywords: Democracy. Tolerance. Political theory. National Identity. Nas discussões contemporâneas sobre as transformações da democracia, a tolerância é com freqüência evocada para expressar o modo pelo qual as democracias respondem às novas exigências de reconhecimento da pluralidade. Ao esboçar as linhas gerais da relação entre tolerância e democracia, o presente artigo pretende aprofundar a compreensão do lugar e dos limites da tolerância na democracia. Em um segundo momento, tratará de avaliar o alcance do uso contemporâneo da tolerância. Palavras-chave: Democracia. Tolerância. Teoria Política. Identidade Nacional.

Tolerance in Drosophila

OpenAIRE

Atkinson, Nigel S.

2009-01-01

The set of genes that underlie ethanol tolerance (inducible resistance) are likely to overlap with the set of genes responsible for ethanol addiction. Whereas addiction is difficult to recognize in simple model systems, behavioral tolerance is readily identifiable and can be induced in large populations of animals. Thus, tolerance lends itself to analysis in model systems with powerful genetics. Drosophila melanogaster has been used by a variety of laboratories for the identification of genes...

Prediction of Glucose Tolerance without an Oral Glucose Tolerance Test

Directory of Open Access Journals (Sweden)

Rohit Babbar

2018-03-01

Full Text Available IntroductionImpaired glucose tolerance (IGT is diagnosed by a standardized oral glucose tolerance test (OGTT. However, the OGTT is laborious, and when not performed, glucose tolerance cannot be determined from fasting samples retrospectively. We tested if glucose tolerance status is reasonably predictable from a combination of demographic, anthropometric, and laboratory data assessed at one time point in a fasting state.MethodsGiven a set of 22 variables selected upon clinical feasibility such as sex, age, height, weight, waist circumference, blood pressure, fasting glucose, HbA1c, hemoglobin, mean corpuscular volume, serum potassium, fasting levels of insulin, C-peptide, triglyceride, non-esterified fatty acids (NEFA, proinsulin, prolactin, cholesterol, low-density lipoprotein, HDL, uric acid, liver transaminases, and ferritin, we used supervised machine learning to estimate glucose tolerance status in 2,337 participants of the TUEF study who were recruited before 2012. We tested the performance of 10 different machine learning classifiers on data from 929 participants in the test set who were recruited after 2012. In addition, reproducibility of IGT was analyzed in 78 participants who had 2 repeated OGTTs within 1 year.ResultsThe most accurate prediction of IGT was reached with the recursive partitioning method (accuracy = 0.78. For all classifiers, mean accuracy was 0.73 ± 0.04. The most important model variable was fasting glucose in all models. Using mean variable importance across all models, fasting glucose was followed by NEFA, triglycerides, HbA1c, and C-peptide. The accuracy of predicting IGT from a previous OGTT was 0.77.ConclusionMachine learning methods yield moderate accuracy in predicting glucose tolerance from a wide set of clinical and laboratory variables. A substitution of OGTT does not currently seem to be feasible. An important constraint could be the limited reproducibility of glucose tolerance status during a

Death Associated with Inadequate Reassessment of Venous Thromboembolism Prophylaxis at and after Hospital Discharge.

Science.gov (United States)

2015-01-01

Venous thromboembolism (VTE) prophylaxis, also known as thromboprophylaxis, reduces the risk of deep vein thrombosis, pulmonary embolism, and associated complications, including death, in high-risk patients. VTE prophylaxis is recommended for acutely ill, hospitalized medical patients at risk of thrombosis. Anticoagulants, the pharmacologic agents of choice to prevent VTE, are considered high-alert medications. By definition, therefore, anticoagulants bear a hightened risk of causing significant patient harm when they are used in error. As part of ongoing collaboration with a provincial death investigation service, ISMP Canada received a report of a fatal incident that involved continuation of VTE prophylaxis with enoxaparin for a patient discharge to a long-term care (LTC) facility from an acute care setting. The findings and recommendations from this case are charged to highlight the need to build routine reassessment of VTE prophylaxis into the process for discharging patients from the acute care setting and upon transfer to another facility or to primary care. The incident described in this bulletin highlights the importance of continually reassessing the need for VTE prophylaxis, especially at transitions of care, such as discharge from an acute care setting. Evidence and guidelines confirm the benefits of VTE prophylaxis in certain patients during a hospital stay for an acute illness, but the balance of benefits and risks may become unfavourable once the patient is discharged. Clear documentation from the acute care facility can assist the receiving facility and health-care providers, as well as family caregivers, when determining whether thromboprophylaxis is still warranted. Until clear guidance to continue thromboprophylaxis after acute care is available, health-care organizations and practitioners across the spectrum of care are urged to share and consider the strategies presented in this bulletin to ensure the safe use of VTE prophylaxis and improved

Socio-Economic Condition and the Risk of Zika: Risk Mapping in Brownsville, TX

Science.gov (United States)

EPA has a Congressional mandate to support and promote the use of IPM. Both Federal Insecticide Fungicide and Rodenticide Act (FIFRA) and the Food Quality Protection Act (FQPA) contain language directing EPA to cooperate with various partners to further the use of IPM. Congress m...

CUMULATIVE REPRODUCTIVE EFFECTS OF IN UTERO ADMINISTRATION OF A MIXTURE OF TEN “ANTIANDROGENS” IN MALE SD RATS: SYNERGY OR ADDITIVITY?

Science.gov (United States)

In 1996, the USEPA was charged under FQPA to consider the cumulative effects of chemicals in their risk assessments. We are conducting studies to provide a framework for assessing the cumulative effects of antiandrogens. In the current study, ten “antiandrogenic” chemicals were a...

Lactose tolerance tests

Science.gov (United States)

Hydrogen breath test for lactose tolerance ... Two common methods include: Lactose tolerance blood test Hydrogen breath test The hydrogen breath test is the preferred method. It measures the amount of hydrogen ...

Mathematical phantoms for use in reassessment of radiation doses to Japanese atomic-bomb survivors

International Nuclear Information System (INIS)

Cristy, M.

1985-07-01

In 1972 committees of the United Nations and the US National Academy of Sciencs emphasized the need for organ dose estimates on the Japanese atomic-bomb survivors. These estimates were then supplied by workers in Japan and the US, and they were used with the so-called T65D estimates of a survivor's radiation exposure to assess risk from radiation. Recently the T65D estimates have been questioned, and programs for reassessment of atomic-bomb radiation dosimetry have been started in Japan and the US. As a part of this new effort a mathematical analogue of the human body (or ''mathematical phantom''), to be used in estimating organ doses in adult survivors, is presented here. Recommendations on organ dosimetry for juvenile survivors are also presented and discussed. 57 refs., 10 figs., 6 tabs

Fault-tolerant computing systems

International Nuclear Information System (INIS)

Dal Cin, M.; Hohl, W.

1991-01-01

Tests, Diagnosis and Fault Treatment were chosen as the guiding themes of the conference. However, the scope of the conference included reliability, availability, safety and security issues in software and hardware systems as well. The sessions were organized for the conference which was completed by an industrial presentation: Keynote Address, Reconfiguration and Recover, System Level Diagnosis, Voting and Agreement, Testing, Fault-Tolerant Circuits, Array Testing, Modelling, Applied Fault Tolerance, Fault-Tolerant Arrays and Systems, Interconnection Networks, Fault-Tolerant Software. One paper has been indexed separately in the database. (orig./HP)

Intolerant tolerance.

Science.gov (United States)

Khushf, G

1994-04-01

The Hyde Amendment and Roman Catholic attempts to put restrictions on Title X funding have been criticized for being intolerant. However, such criticism fails to appreciate that there are two competing notions of tolerance, one focusing on the limits of state force and accepting pluralism as unavoidable, and the other focusing on the limits of knowledge and advancing pluralism as a good. These two types of tolerance, illustrated in the writings of John Locke and J.S. Mill, each involve an intolerance. In a pluralistic context where the free exercise of religion is respected, John Locke's account of tolerance is preferable. However, it (in a reconstructed form) leads to a minimal state. Positive entitlements to benefits like artificial contraception or nontherapeutic abortions can legitimately be resisted, because an intolerance has already been shown with respect to those that consider the benefit immoral, since their resources have been coopted by taxation to advance an end that is contrary to their own. There is a sliding scale from tolerance (viewed as forbearance) to the affirmation of communal integrity, and this scale maps on to the continuum from negative to positive rights.

Changes in bacillus thuringiensis tolerance levels due to hybridization of Bt-tolerant and susceptible silkworm populations

International Nuclear Information System (INIS)

Begumad, H.A.; Hassana, E.; Dingleb, J.; Alshehic, A.A.

2012-01-01

Males and females of a Bt-tolerant mulberry silkworm (Bombyx mori L.) population were crossed with females and males of a Bt-susceptible population, to produce Bt-tolerant silkworm hybrids, and to determine the expression of the Bt-tolerance pattern in the F 1 hybrids. It was observed that when a Bt-tolerant (42% larval mortality) female (BtT ) silkworm was crossed with a Bt-susceptible (85% larval mortality) male (BtS ), the resultant F 1 offspring showed lower levels of Bt-tolerance (87% larval mortality). On the other hand, when a Bt-tolerant male (BtT ) was crossed with a Bt-susceptible female (BtS ), the F 1 hybrid showed higher levels of Bt-tolerance (35% larval mortality) characteristic. The probit statistics showed that both hybrids expressed Bt-tolerance or susceptible levels similar to their male parents. These different patterns of Bt-tolerance in F 1 hybrids might be due to the transferring of a Bt-tolerant gene, from the parents to offspring, through the homozygotic male (ZZ) silkworm. (author)

Suppressor cells in transplantation tolerance. I. Analysis of the suppressor status of neonatally and adoptively tolerized rats

International Nuclear Information System (INIS)

Dorsch, S.; Roser, B.

1982-01-01

The lymphocytes from neonatally tolerant rats which adoptively transfer tolerance to sublethally irradiated recipients do so by specifically suppressing the regeneration of alloreactivity which normally occurs after irradiation. Although tolerant cells will only partially suppress normal alloreactive cells when the two are mixed in near equivalent numbers, experiments in which the interval between injection of tolerant and normal cells into irradiated recipients was gradually extended, indicated that total suppression of normally alloreactive cells was achieved after 8 weeks of prior residence of tolerant cells in the adoptive host. Further evidence that tolerant cells would only suppress if present in excess of normal cells was obtained by reducing the tolerant cell population in tolerant donor rats by whole body irradiation. These animals then lost their ability to suppress normal alloreactive cells administered to them. The immune status of adoptively tolerized animals did not mimic that of the donors of the tolerant cells. Even where full tolerance, as measured by skin graft survival, failure to synthesize alloantibodies, and capacity to further transfer skin graft tolerance to secondary recipients, was evident the lymphocytes of these animals showed considerable graft-versus-host (GVH) reactivity. The persistence of tolerance through repeated adoptive transfers was correlated with the persistence of donor (chimeric) cells and the indicator skin graft on adoptive recipients only amplified tolerance expression where the inocula of tolerant cells given was weakly suppressive. Finally, removal of the minor population of chimeric cells from tolerant inocula using cytotoxic alloantisera abolished the capacity to transfer tolerance. These results imply an active role for chimeric cells which is best understood as an immune response involving proliferation driven by the idiotypes of the alloreceptors on host cells

A Two-Tiered-Testing Decision Tree for Assays in the USEPA-EDSP Screening Battery: Using 15 years of experience to improve screening and testing for endocrine active chemicals

Science.gov (United States)

Outline of the presentationEDCs – from 1991 to 1996 – Wingspread and Our Stolen Future 1996 – FQPA and SDWA mandates endocrine screening 1996-1998 – EDSTAC (the assays, debates over modes of action included) The final battery – EAT in vivo and in vit...

Suppressor cells in transplantation tolerance: I. analysis of the suppressor status of neonatally and adoptively tolerized rats

International Nuclear Information System (INIS)

Dorsch, S.; Roser, B.

1982-01-01

The lymphocytes from neonatally tolerant rats which adoptively transfer tolerance to sublethally irradiated recipients do so by specificallly suppressing the regeneration of alloreactivity which normally occurs after irradiation. Although tolerant cells will only partially suppress normal alloreactive cells when the two are mixed in near equivalent numbers, experiments in which the interval between injection of tolerant and normal cells into irradiated recipients was gradually extended, indicated that total suppression of normally alloreactive cells was achieved after 8 weeks of prior residence of tolerant cells in the adoptive host. Further evidence that tolerant cells would only suppress if present in excess of normal cells was obtained by reducing the tolerant cell populaton in tolerant donor rats by whole body irradiation. The persistence of tolerance through repeated adoptive transfers was correlated with the persistence of donor (chimeric) cells and the indicator skin graft on adoptive recipients only amplified tolerance expression where the inocula of tolerant cells given was weakly suppressive

In vitro selection of induced mutants to salt-tolerance: Inducible gene regulation for salt tolerance

Energy Technology Data Exchange (ETDEWEB)

Winicov, I [Department of Microbiology and Biochemistry, Univ. of Nevada-Reno, Reno, NV (United States)

1997-07-01

A selection protocol to obtain salt tolerant calli, followed by regeneration and progeny-test of the regenerated plants for salt tolerance in rice was investigated. Callus cultures were initiated from salt-sensitive US elite rice lines and cv. `Pokkali`. Salt-tolerant cell lines were selected from these by a single step selection procedure. The selected salt-tolerant lines grew well on medium with {+-} 0.5% or 1% NaCl, while the parent lines occasionally survived, but did not grow at these salt concentrations. Plants were regenerated from these cell lines through different passages on medium containing salt. Seed was collected from the regenerated plants and salt tolerance of R2 seedlings was compared with those regenerated without salt selection. Salt-tolerance was measured by survival and productive growth of newly germinated seedlings in Hoagland solution with 0.3% and 0.5% NaCl for 4 weeks. Heritable improvement in salt tolerance was obtained in R2 seedlings from one plant regenerated after 5 months selection. Survival and growth of these seedlings was equivalent to that from `Pokkali` seedlings. These results show that cellular tolerance can provide salt-tolerance in rice plants. (author). 6 refs, 2 tabs.

In vitro selection of induced mutants to salt-tolerance: Inducible gene regulation for salt tolerance

International Nuclear Information System (INIS)

Winicov, I.

1997-01-01

A selection protocol to obtain salt tolerant calli, followed by regeneration and progeny-test of the regenerated plants for salt tolerance in rice was investigated. Callus cultures were initiated from salt-sensitive US elite rice lines and cv. 'Pokkali'. Salt-tolerant cell lines were selected from these by a single step selection procedure. The selected salt-tolerant lines grew well on medium with ± 0.5% or 1% NaCl, while the parent lines occasionally survived, but did not grow at these salt concentrations. Plants were regenerated from these cell lines through different passages on medium containing salt. Seed was collected from the regenerated plants and salt tolerance of R2 seedlings was compared with those regenerated without salt selection. Salt-tolerance was measured by survival and productive growth of newly germinated seedlings in Hoagland solution with 0.3% and 0.5% NaCl for 4 weeks. Heritable improvement in salt tolerance was obtained in R2 seedlings from one plant regenerated after 5 months selection. Survival and growth of these seedlings was equivalent to that from 'Pokkali' seedlings. These results show that cellular tolerance can provide salt-tolerance in rice plants. (author). 6 refs, 2 tabs

Om tolerance

DEFF Research Database (Denmark)

Huggler, Jørgen

2007-01-01

Begrebet tolerance og dets betydninger diskuteres med henblik på en tydeliggørelse af begrebets forbindelse med stat, religion, ytringsfrihed, skeptisk erkendelsesteori, antropologi og pædagogik.......Begrebet tolerance og dets betydninger diskuteres med henblik på en tydeliggørelse af begrebets forbindelse med stat, religion, ytringsfrihed, skeptisk erkendelsesteori, antropologi og pædagogik....

Full quantitative phase analysis of hydrated lime using the Rietveld method

Energy Technology Data Exchange (ETDEWEB)

Lassinantti Gualtieri, Magdalena, E-mail: magdalena.gualtieri@unimore.it [Dipartimento Ingegneria dei Materiali e dell' Ambiente, Universita Degli Studi di Modena e Reggio Emilia, Via Vignolese 905/a, I-41100 Modena (Italy); Romagnoli, Marcello; Miselli, Paola; Cannio, Maria [Dipartimento Ingegneria dei Materiali e dell' Ambiente, Universita Degli Studi di Modena e Reggio Emilia, Via Vignolese 905/a, I-41100 Modena (Italy); Gualtieri, Alessandro F. [Dipartimento di Scienze della Terra, Universita Degli Studi di Modena e Reggio Emilia, I-41100 Modena (Italy)

2012-09-15

Full quantitative phase analysis (FQPA) using X-ray powder diffraction and Rietveld refinements is a well-established method for the characterization of various hydraulic binders such as Portland cement and hydraulic limes. In this paper, the Rietveld method is applied to hydrated lime, a non-hydraulic traditional binder. The potential presence of an amorphous phase in this material is generally ignored. Both synchrotron radiation and a conventional X-ray source were used for data collection. The applicability of the developed control file for the Rietveld refinements was investigated using samples spiked with glass. The results were cross-checked by other independent methods such as thermal and chemical analyses. The sample microstructure was observed by transmission electron microscopy. It was found that the consistency between the different methods was satisfactory, supporting the validity of FQPA for this material. For the samples studied in this work, the amount of amorphous material was in the range 2-15 wt.%.

Full quantitative phase analysis of hydrated lime using the Rietveld method

International Nuclear Information System (INIS)

Lassinantti Gualtieri, Magdalena; Romagnoli, Marcello; Miselli, Paola; Cannio, Maria; Gualtieri, Alessandro F.

2012-01-01

Full quantitative phase analysis (FQPA) using X-ray powder diffraction and Rietveld refinements is a well-established method for the characterization of various hydraulic binders such as Portland cement and hydraulic limes. In this paper, the Rietveld method is applied to hydrated lime, a non-hydraulic traditional binder. The potential presence of an amorphous phase in this material is generally ignored. Both synchrotron radiation and a conventional X-ray source were used for data collection. The applicability of the developed control file for the Rietveld refinements was investigated using samples spiked with glass. The results were cross-checked by other independent methods such as thermal and chemical analyses. The sample microstructure was observed by transmission electron microscopy. It was found that the consistency between the different methods was satisfactory, supporting the validity of FQPA for this material. For the samples studied in this work, the amount of amorphous material was in the range 2–15 wt.%.

The peer effect on pain tolerance.

Science.gov (United States)

Engebretsen, Solveig; Frigessi, Arnoldo; Engø-Monsen, Kenth; Furberg, Anne-Sofie; Stubhaug, Audun; de Blasio, Birgitte Freiesleben; Nielsen, Christopher Sivert

2018-05-19

Twin studies have found that approximately half of the variance in pain tolerance can be explained by genetic factors, while shared family environment has a negligible effect. Hence, a large proportion of the variance in pain tolerance is explained by the (non-shared) unique environment. The social environment beyond the family is a potential candidate for explaining some of the variance in pain tolerance. Numerous individual traits have previously shown to be associated with friendship ties. In this study, we investigate whether pain tolerance is associated with friendship ties. We study the friendship effect on pain tolerance by considering data from the Tromsø Study: Fit Futures I, which contains pain tolerance measurements and social network information for adolescents attending first year of upper secondary school in the Tromsø area in Northern Norway. Pain tolerance was measured with the cold-pressor test (primary outcome), contact heat and pressure algometry. We analyse the data by using statistical methods from social network analysis. Specifically, we compute pairwise correlations in pain tolerance among friends. We also fit network autocorrelation models to the data, where the pain tolerance of an individual is explained by (among other factors) the average pain tolerance of the individual's friends. We find a significant and positive relationship between the pain tolerance of an individual and the pain tolerance of their friends. The estimated effect is that for every 1 s increase in friends' average cold-pressor tolerance time, the expected cold-pressor pain tolerance of the individual increases by 0.21 s (p-value: 0.0049, sample size n=997). This estimated effect is controlled for sex. The friendship effect remains significant when controlling for potential confounders such as lifestyle factors and test sequence among the students. Further investigating the role of sex on this friendship effect, we only find a significant peer effect of male friends

Fault-tolerant architecture: Evaluation methodology

International Nuclear Information System (INIS)

Battle, R.E.; Kisner, R.A.

1992-08-01

The design and reliability of four fault-tolerant architectures that may be used in nuclear power plant control systems were evaluated. Two architectures are variations of triple-modular-redundant (TMR) systems, and two are variations of dual redundant systems. The evaluation includes a review of methods of implementing fault-tolerant control, the importance of automatic recovery from failures, methods of self-testing diagnostics, block diagrams of typical fault-tolerant controllers, review of fault-tolerant controllers operating in nuclear power plants, and fault tree reliability analyses of fault-tolerant systems

Recognition and Toleration

DEFF Research Database (Denmark)

Lægaard, Sune

2010-01-01

Recognition and toleration are ways of relating to the diversity characteristic of multicultural societies. The article concerns the possible meanings of toleration and recognition, and the conflict that is often claimed to exist between these two approaches to diversity. Different forms or inter...

Reassessment of liquefaction potential and estimation of earthquake- induced settlements at Paducah Gaseous Diffusion Plant, Paducah, Kentucky. Final report

International Nuclear Information System (INIS)

Sykora, D.W.; Yule, D.E.

1996-04-01

This report documents a reassessment of liquefaction potential and estimation of earthquake-induced settlements for the U.S. Department of Energy (DOE), Paducah Gaseous Diffusion Plant (PGDP), located southwest of Paducah, KY. The U.S. Army Engineer Waterways Experiment Station (WES) was authorized to conduct this study from FY91 to FY94 by the DOE, Oak Ridge Operations (ORO), Oak Ridge, TN, through Inter- Agency Agreement (IAG) No. DE-AI05-91OR21971. The study was conducted under the Gaseous Diffusion Plant Safety Analysis Report (GDP SAR) Program

A detailed reassessment of the criticality property of pure 241Am

International Nuclear Information System (INIS)

Ganesan, Srinivasan; Wienke, Harm

2002-01-01

We present results of new calculations of criticality of pure 241 Am using several basic evaluated neutron-nuclear cross section databases. The re-assessment of the criticality property of 241 Am presented in this paper is relevant to studies of criticality safety, nuclear waste incineration and non-proliferation. Our calculations start from the basic evaluated nuclear data files and use the NJOY-MCNP code system. This paper invalidates the earlier conclusion and belief in a section of the national and international literature that the minor actinide 241 Am is better than 235 U or 239 Pu as a nuclear fuel. Further our calculated critical mass is larger by 28% than the 197 kg reported in 1997 by Nojiri and Fukasaku who used the SCALE-4.3 system using the same ENDF/B-VI data, showing that there is large discrepancy due to the use of different computational codes and/or QA in nuclear data processing. Our calculated value of critical mass using JENDL-3.2 is 75 kg. This result is essentially in agreement with Nojiri and Fukasaku who used the same JENDL-3.2 data and the then available version of the NJOY-MCNP systems. (author)

Reassessment of the NuTeV determination of the weak mixing angle

Energy Technology Data Exchange (ETDEWEB)

Bentz, W. [Department of Physics, School of Science, Tokai University, Hiratsuka-shi, Kanagawa 259-1292 (Japan); Cloet, I.C., E-mail: icloet@jlab.or [Department of Physics, University of Washington, Seattle, WA 98195-1560 (United States); Londergan, J.T. [Department of Physics and Nuclear Theory Center, Indiana University, Bloomington, IN 47405 (United States); Thomas, A.W. [CSSM, School of Chemistry and Physics, University of Adelaide, Adelaide, SA 5005 (Australia); Jefferson Lab, 12000 Jefferson Avenue, Newport News, VA 23606 (United States)

2010-10-11

In light of the recent discovery of the importance of the isovector EMC effect for the interpretation of the NuTeV determination of sin{sup 2{theta}}{sub W}, it seems timely to reassess the central value and the errors on this fundamental Standard Model parameter derived from the NuTeV data. We also include earlier work on charge symmetry violation and the recent limits on a possible asymmetry between s and s{sup -bar} quarks. With these corrections we find a revised NuTeV result of sin{sup 2{theta}}{sub W}=0.2221{+-}0.0013(stat){+-}0.0020(syst), which is in excellent agreement with the running of sin{sup 2{theta}}{sub W} predicted by the Standard Model. As a further check, we find that the separate ratios of neutral current to charge current cross-sections for neutrinos and for antineutrinos are both in agreement with the Standard Model, at just over one standard deviation, once the corrections described here are applied.

Massive Sensor Array Fault Tolerance: Tolerance Mechanism and Fault Injection for Validation

Directory of Open Access Journals (Sweden)

Dugan Um

2010-01-01

Full Text Available As today's machines become increasingly complex in order to handle intricate tasks, the number of sensors must increase for intelligent operations. Given the large number of sensors, detecting, isolating, and then tolerating faulty sensors is especially important. In this paper, we propose fault tolerance architecture suitable for a massive sensor array often found in highly advanced systems such as autonomous robots. One example is the sensitive skin, a type of massive sensor array. The objective of the sensitive skin is autonomous guidance of machines in unknown environments, requiring elongated operations in a remote site. The entirety of such a system needs to be able to work remotely without human attendance for an extended period of time. To that end, we propose a fault-tolerant architecture whereby component and analytical redundancies are integrated cohesively for effective failure tolerance of a massive array type sensor or sensor system. In addition, we discuss the evaluation results of the proposed tolerance scheme by means of fault injection and validation analysis as a measure of system reliability and performance.

Isolation of butanol- and isobutanol-tolerant bacteria and physiological characterization of their butanol tolerance.

Science.gov (United States)

Kanno, Manabu; Katayama, Taiki; Tamaki, Hideyuki; Mitani, Yasuo; Meng, Xian-Ying; Hori, Tomoyuki; Narihiro, Takashi; Morita, Naoki; Hoshino, Tamotsu; Yumoto, Isao; Kimura, Nobutada; Hanada, Satoshi; Kamagata, Yoichi

2013-11-01

Despite their importance as a biofuel production platform, only a very limited number of butanol-tolerant bacteria have been identified thus far. Here, we extensively explored butanol- and isobutanol-tolerant bacteria from various environmental samples. A total of 16 aerobic and anaerobic bacteria that could tolerate greater than 2.0% (vol/vol) butanol and isobutanol were isolated. A 16S rRNA gene sequencing analysis revealed that the isolates were phylogenetically distributed over at least nine genera: Bacillus, Lysinibacillus, Rummeliibacillus, Brevibacillus, Coprothermobacter, Caloribacterium, Enterococcus, Hydrogenoanaerobacterium, and Cellulosimicrobium, within the phyla Firmicutes and Actinobacteria. Ten of the isolates were phylogenetically distinct from previously identified butanol-tolerant bacteria. Two relatively highly butanol-tolerant strains CM4A (aerobe) and GK12 (obligate anaerobe) were characterized further. Both strains changed their membrane fatty acid composition in response to butanol exposure, i.e., CM4A and GK12 exhibited increased saturated and cyclopropane fatty acids (CFAs) and long-chain fatty acids, respectively, which may serve to maintain membrane fluidity. The gene (cfa) encoding CFA synthase was cloned from strain CM4A and expressed in Escherichia coli. The recombinant E. coli showed relatively higher butanol and isobutanol tolerance than E. coli without the cfa gene, suggesting that cfa can confer solvent tolerance. The exposure of strain GK12 to butanol by consecutive passages even enhanced the growth rate, indicating that yet-unknown mechanisms may also contribute to solvent tolerance. Taken together, the results demonstrate that a wide variety of butanol- and isobutanol-tolerant bacteria that can grow in 2.0% butanol exist in the environment and have various strategies to maintain structural integrity against detrimental solvents.

A Multirelational Account of Toleration

DEFF Research Database (Denmark)

Ferretti, Maria Paola; Lægaard, Sune

2013-01-01

Toleration classically denotes a relation between two agents that is characterised by three components: objection, power, and acceptance overriding the objection. Against recent claims that classical toleration is not applicable in liberal democracies and that toleration must therefore either be ...

State, religion and toleration

DEFF Research Database (Denmark)

Huggler, Jørgen

2009-01-01

Contribution to Religion and State - From separation to cooperation? Legal-philosophical reflections for a de-secularized world. (IVR Cracow Special Workshop). Eds. Bart. C. Labuschagne & Ari M. Solon. Abstract: Toleration is indeed a complex phenomenon. A discussion of the concept will have...... to underline not only the broadmindedness and liberty of individuals or of groups, but also the relevant distinctions and arguments in political philosophy, epistemology, philosophy of religion and philosophical anthropology and their connection with educational issues. Through a discussion of these relations......, the essay argues three theses: (1) Toleration is not reducible to an ethics of spiritual freedom. (2) Toleration is not neutral to fanatism. (3) Toleration involves esteem for the person....

"In the Wake of the Crisis : Leading Economists Reassess Economic Policy" Edited by Olivier Blanchard, David Romer, Michael Spence, and Joseph Stiglitz

OpenAIRE

Murat Ungor

2013-01-01

To understand the issues raised by the recent global crisis, IMF organized a conference on March 7-8, 2011, around six themes: monetary policy, fiscal policy, financial intermediation and regulation, capital account management, growth strategies, and the international monetary system. The conference proceedings are published in a book, In the Wake of the Crisis: Leading Economists Reassess Economic Policy. This review presents a summary of the book and provides its implications for research a...

78 FR 40027 - Novaluron; Pesticide Tolerances

Science.gov (United States)

2013-07-03

...). This regulation additionally deletes the time- limited tolerance for strawberry, as that tolerance..., pears, potatoes, strawberries, and tomatoes and utilized estimates for PCT for recently registered uses... deletes the time-limited tolerance for strawberry, as that tolerance expired on December 31, 2011. VI...

77 FR 4890 - Damage Tolerance and Fatigue Evaluation for Composite Rotorcraft Structures, and Damage Tolerance...

Science.gov (United States)

2012-02-01

...-AJ52, 2120-AJ51 Damage Tolerance and Fatigue Evaluation for Composite Rotorcraft Structures, and Damage Tolerance and Fatigue Evaluation for Metallic Structures; Correction AGENCY: Federal Aviation Administration... Tolerance and Fatigue Evaluation for Composite Rotorcraft Structures'' (76 FR 74655), published December 1...

Reassessment of FDG uptake in tumor cells: High FDG uptake as a reflection of oxygen-independent glycolysis dominant energy production

Energy Technology Data Exchange (ETDEWEB)

Waki, A.; Fujibayashi, Y.; Yonekura, Y.; Sadato, N.; Ishii, Y.; Yokoyama, A

1997-10-01

To determine appropriate use of 2-[{sup 18}F]-fluoro-2-deoxy-D-glucose (FDG) in the diagnosis of malignant tumors, the mechanism of enhanced FDG uptake in tumor cells was reassessed using in vitro cultured cell lines and {sup 3}H-deoxyglucose (DG), in combination with possible parameters of aerobic and anaerobic energy production. The high DG uptake in the tumor cells reflected the dependency of energy production on anaerobic glycolysis, and paradoxically on low levels of aerobic oxidative phosphorylation in mitochondria. We discuss here factors underlying anaerobic glycolysis in tumor cells.

Fractionated radiation therapy in the treatment of intracranial meningiomas: local control, functional efficacy, and tolerance in 91 patients

International Nuclear Information System (INIS)

Maire, Jean-Philippe; Caudry, Michel; Guerin, Jean; Celerier, Denis; San Galli, Francois; Causse, Nicole; Trouette, Renaud; Dautheribes, Michel

1995-01-01

Purpose: To evaluate efficacy and tolerance of external fractionated radiation therapy (RT) in the treatment of intracranial meningiomas. Methods and Materials: From January 1981 to September 1993, 91 patients with intracranial meningiomas were treated with fractionated RT. Indications were as follows: (a) incomplete surgical resection, 29 patients; (b) tumor recurrences without considering the amount of the second resection, if performed, 14 patients; (c) completely excised angioblastic, aggressive benign, and anaplastic tumors, 8 patients; (d) medically inoperable and basilar tumors where operation would involve considerable danger or permanent neurological damage, 44 patients. Most patients were irradiated with 6 to 9 MV photon beams. A three- to four-field technique with coned-down portals was used. Doses were calculated on the 95% isodose and were given 5 days a week for a median total dose of 52 Gy (1.80 Gy/fraction). Results: Median follow-up from radiation therapy was 40 months. Acute tolerance was excellent, but there were six late delayed injuries. Tumor recurrences occurred in six cases. Six patients died from their tumor or RT complications, 19 from nontumoral reasons. Three, 5- and 10-year survival rates were 82, 71, and 40%, respectively. The most significant prognostic factor was age: 5-year survival rate was 86% for patients less than 65 years and 37% for patients more than 65. However, there were no differences in recurrence-free survival rates between patients younger than 65 and the oldest ones. Of 60 symptomatic patients with neurological deficits, 43 had neurological improvement (72%), beginning in some cases within 15 to 20 days after starting RT. Conclusion: These results reassess the role of fractionated RT in the treatment of meningiomas, and stress on its efficacy, especially on cranial nerves palsies, without severe toxicity in most cases

Newly Identified Wild Rice Accessions Conferring High Salt Tolerance Might Use a Tissue Tolerance Mechanism in Leaf

Science.gov (United States)

Prusty, Manas R.; Kim, Sung-Ryul; Vinarao, Ricky; Entila, Frederickson; Egdane, James; Diaz, Maria G. Q.; Jena, Kshirod K.

2018-01-01

Cultivated rice (Oryza sativa L.) is very sensitive to salt stress. So far a few rice landraces have been identified as a source of salt tolerance and utilized in rice improvement. These tolerant lines primarily use Na+ exclusion mechanism in root which removes Na+ from the xylem stream by membrane Na+ and K+ transporters, and resulted in low Na+ accumulation in shoot. Identification of a new donor source conferring high salt tolerance is imperative. Wild relatives of rice having wide genetic diversity are regarded as a potential source for crop improvement. However, they have been less exploited against salt stress. Here, we simultaneously evaluated all 22 wild Oryza species along with the cultivated tolerant lines including Pokkali, Nona Bokra, and FL478, and sensitive check varieties under high salinity (240 mM NaCl). Based on the visual salt injury score, three species (O. alta, O. latifolia, and O. coarctata) and four species (O. rhizomatis, O. eichingeri, O. minuta, and O. grandiglumis) showed higher and similar level of tolerance compared to the tolerant checks, respectively. All three CCDD genome species exhibited salt tolerance, suggesting that the CCDD genome might possess the common genetic factors for salt tolerance. Physiological and biochemical experiments were conducted using the newly isolated tolerant species together with checks under 180 mM NaCl. Interestingly, all wild species showed high Na+ concentration in shoot and low concentration in root unlike the tolerant checks. In addition, the wild-tolerant accessions showed a tendency of a high tissue tolerance in leaf, low malondialdehyde level in shoot, and high retention of chlorophyll in the young leaves. These results suggest that the wild species employ tissue tolerance mechanism to manage salt stress. Gene expression analyses of the key salt tolerance-related genes suggested that high Na+ in leaf of wild species might be affected by OsHKT1;4-mediated Na+ exclusion in leaf and the following Na

Children and Pesticides: New Approach to Considering Risk Is Partly in Place. Report to Congressional Requesters.

Science.gov (United States)

Heinrich, Janet

The Food Quality Protection Act of 1996 (FQPA) requires that the Environmental Protection Agency (EPA), which regulates the use of pesticides at the federal level, reevaluate the amounts of pesticide residues allowed on or in food. The EPA immediately began efforts to consider the additional safety factor for children, using available methods and…

75 FR 29908 - Prothioconazole; Pesticide Tolerances

Science.gov (United States)

2010-05-28

.... The straw numerical value (5 ppm) is matched between the U.S. and Codex. The tolerance definition for... lower (0.07 ppm) than the recommended U.S. group tolerance. The 0.07 ppm value is the current U.S. tolerance value for wheat, but will be replaced by the cereal grain group tolerance. Canada does not...

An overview of the United States dose reassessment program

International Nuclear Information System (INIS)

Christy, R.F.

1983-01-01

The US Dose Reassessment Program consists of a number of separate efforts to reexamine all the stages from the initial assembly of the fissionable material, through the transport of neutrons and gamma rays, to the final deposition of the dose of ionizing radiation. Where possible, experimental measurements will be used to normalize the calculations. This program is summarized as follows: (1) calculations on the output of prompt neutrons and gamma rays from the detonating bomb, by Los Alamos National Laboratory (LANL), including calculation of the output of various test bombs where measurements have been made and of a critical assembly of a Hiroshima type bomb, (2) transport calculations for prompt neutrons and gamma rays in air by Oak Ridge National Laboratory (ORNL) and Lawrence Livermore National Laboratory (LLNL) including transport in air of gamma rays secondary to prompt neutrons and calculation of various test devices, (3) calculation of the emission and transport in air of delayed gamma rays from the cloud of fission products by Science Applications, Inc. (SAI) which can also include delayed neutron calculations, (4) calculations of the shielding effects of buildings, etc., on the neutron and gamma ray flux by SAI and ORNL, (5) calculation of organ doses and transport in the body by ORNL and SAI, (6) calibration of in situ measurements by LLNL and ORNL, (7) thermoluminescent (TL) dosimetry to determine gamma ray flux by the Japanese National Institute of Radiological Sciences and the University of Utah, and (8) review of information on bomb yield by LANL and ORNL. (author)

Drought tolerance in potato (S. tuberosum L.): Can we learn from drought tolerance research in cereals?

Science.gov (United States)

Monneveux, Philippe; Ramírez, David A; Pino, María-Teresa

2013-05-01

Drought tolerance is a complex trait of increasing importance in potato. Our knowledge is summarized concerning drought tolerance and water use efficiency in this crop. We describe the effects of water restriction on physiological characteristics, examine the main traits involved, report the attempts to improve drought tolerance through in vitro screening and marker assisted selection, list the main genes involved and analyze the potential interest of native and wild potatoes to improve drought tolerance. Drought tolerance has received more attention in cereals than in potato. The review compares these crops for indirect selection methods available for assessment of drought tolerance related traits, use of genetic resources, progress in genomics, application of water saving techniques and availability of models to anticipate the effects of climate change on yield. It is concluded that drought tolerance improvement in potato could greatly benefit from the transfer of research achievements in cereals. Several promising research directions are presented, such as the use of fluorescence, reflectance, color and thermal imaging and stable isotope techniques to assess drought tolerance related traits, the application of the partial root-zone drying technique to improve efficiency of water supply and the exploitation of stressful memory to enhance hardiness. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Frustration Tolerance in Youth With ADHD.

Science.gov (United States)

Seymour, Karen E; Macatee, Richard; Chronis-Tuscano, Andrea

2016-06-08

The objective of this study was to compare children with ADHD with children without ADHD on frustration tolerance and to examine the role of oppositional defiant disorder (ODD) in frustration tolerance within the sample. Participants included 67 children ages 10 to 14 years-old with (n = 37) and without (n = 30) Diagnostic and Statistical Manual of Mental Disorders (4th ed.; DSM-IV) ADHD who completed the Mirror Tracing Persistence Task (MTPT), a validated computerized behavioral measure of frustration tolerance. Children with ADHD were more likely to quit this task than children without ADHD, demonstrating lower levels of frustration tolerance. There were no differences in frustration tolerance between children with ADHD + ODD and those with ADHD - ODD. Moreover, ODD did not moderate the relationship between ADHD and frustration tolerance. Our results suggest that low frustration tolerance is directly linked to ADHD and not better accounted for by ODD. This research highlights specific behavioral correlates of frustration in children with ADHD. © The Author(s) 2016.

IRON-TOLERANT CYANOBACTERIA: IMPLICATIONS FOR ASTROBIOLOGY

Science.gov (United States)

Brown, Igor I.; Allen, Carlton C.; Mummey, Daniel L.; Sarkisova, Svetlana A.; McKay, David S.

2006-01-01

The review is dedicated to the new group of extremophiles - iron tolerant cyanobacteria. The authors have analyzed earlier published articles about the ecology of iron tolerant cyanobacteria and their diversity. It was concluded that contemporary iron depositing hot springs might be considered as relative analogs of Precambrian environment. The authors have concluded that the diversity of iron-tolerant cyanobacteria is understudied. The authors also analyzed published data about the physiological peculiarities of iron tolerant cyanobacteria. They made the conclusion that iron tolerant cyanobacteria may oxidize reduced iron through the photosystem of cyanobacteria. The involvement of both Reaction Centers 1 and 2 is also discussed. The conclusion that iron tolerant protocyanobacteria could be involved in banded iron formations generation is also proposed. The possible mechanism of the transition from an oxygenic photosynthesis to an oxygenic one is also discussed. In the final part of the review the authors consider the possible implications of iron tolerant cyanobacteria for astrobiology.

Measurement, methods, and divergent patterns: Reassessing the effects of same-sex parents.

Science.gov (United States)

Cheng, Simon; Powell, Brian

2015-07-01

Scholars have noted that survey analysis of small subsamples-for example, same-sex parent families-is sensitive to researchers' analytical decisions, and even small differences in coding can profoundly shape empirical patterns. As an illustration, we reassess the findings of a recent article by Regnerus regarding the implications of being raised by gay and lesbian parents. Taking a close look at the New Family Structures Study (NFSS), we demonstrate the potential for misclassifying a non-negligible number of respondents as having been raised by parents who had a same-sex romantic relationship. We assess the implications of these possible misclassifications, along with other methodological considerations, by reanalyzing the NFSS in seven steps. The reanalysis offers evidence that the empirical patterns showcased in the original Regnerus article are fragile-so fragile that they appear largely a function of these possible misclassifications and other methodological choices. Our replication and reanalysis of Regnerus's study offer a cautionary illustration of the importance of double checking and critically assessing the implications of measurement and other methodological decisions in our and others' research. Copyright © 2015 Elsevier Inc. All rights reserved.

Reassessing the Role of Intra-Arterial Drug Delivery for Glioblastoma Multiforme Treatment

Directory of Open Access Journals (Sweden)

Jason A. Ellis

2015-01-01

Full Text Available Effective treatment for glioblastoma (GBM will likely require targeted delivery of several specific pharmacological agents simultaneously. Intra-arterial (IA delivery is one technique for targeting the tumor site with multiple agents. Although IA chemotherapy for glioblastoma (GBM has been attempted since the 1950s, the predicted benefits remain unproven in clinical practice. This review focuses on innovative approaches to IA drug delivery in treating GBM. Guided by novel in vitro and in vivo optical measurements, newer pharmacokinetic models promise to better define the complex relationship between background cerebral blood flow and drug injection parameters. Advanced optical technologies and tracers, unique nanoparticles designs, new cellular targets, and rational drug formulations are continuously modifying the therapeutic landscape for GBM. Personalized treatment approaches are emerging; however, such tailored approaches will largely depend on effective drug delivery techniques and on the ability to simultaneously deliver multidrug regimens. These new paradigms for tumor-selective drug delivery herald dramatic improvements in the effectiveness of IA chemotherapy for GBM. Therefore, within this context of so-called “precision medicine,” the role of IA delivery for GBM is thoroughly reassessed.

Tolerances in micro manufacturing

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard; Zhang, Yang; Islam, Aminul

This paper describes a method for analysis of tolerances in micro manufacturing. It proposes a mapping oftolerances to dimensions and compares this with current available international standards. The analysisdocuments that tolerances are not scaled down as the absolute dimension. In practice...

Breeding of Freeze-tolerant Yeast and the Mechanisms of Stress-tolerance

Science.gov (United States)

Hino, Akihiro

Frozen dough method have been adopted in the baking industry to reduce labor and to produce fresh breads in stores. New freeze-tolerant yeasts for frozen dough preparations were isolated from banana peel and identified. To obtain strains that have fermentative ability even after several months of frozen storage in fermented dough, we attempted to breed new freeze-tolerantstrain. The hybrid between S.cerevisiae, which is a isolated freeze-tolerant strain, and a strain isolated from bakers' yeast with sexual conjugation gave a good quality bread made from frozen dough method. Freeze-tolerant strains showed higher surviving and trehalose accumulating abilities than freeze-sensitive strains. The freeze tolerance of the yeasts was associated with the basal amount of intracellular trehalose after rapid degradation at the onset of the prefermentation period. The complicated metabolic pathway and the regulation system of trehalose in yeast cells are introduced. The trehalose synthesis may act as a metabolic buffer system which contribute to maintain the intracellular inorganic phosphate and as a feedback regulation system in the glycolysis. However, it is not known enough how the trehalose protects yeast cells from stress.

The DESCARTES-Nantes survey of kidney transplant recipients displaying clinical operational tolerance identifies 35 new tolerant patients and 34 almost tolerant patients.

Science.gov (United States)

Massart, Annick; Pallier, Annaïck; Pascual, Julio; Viklicky, Ondrej; Budde, Klemens; Spasovski, Goce; Klinger, Marian; Sever, Mehmet Sukru; Sørensen, Søren Schwartz; Hadaya, Karine; Oberbauer, Rainer; Dudley, Christopher; De Fijter, Johan W; Yussim, Alexander; Hazzan, Marc; Wekerle, Thomas; Berglund, David; De Biase, Consuelo; Pérez-Sáez, María José; Mühlfeld, Anja; Orlando, Giuseppe; Clemente, Katia; Lai, Quirino; Pisani, Francesco; Kandus, Aljosa; Baas, Marije; Bemelman, Frederike; Ponikvar, Jadranka Buturovic; Mazouz, Hakim; Stratta, Piero; Subra, Jean-François; Villemain, Florence; Hoitsma, Andries; Braun, Laura; Cantarell, Maria Carmen; Colak, Hulya; Courtney, Aisling; Frasca, Giovanni Maria; Howse, Matthew; Naesens, Maarten; Reischig, Tomas; Serón, Daniel; Seyahi, Nurhan; Tugmen, Cem; Alonso Hernandez, Angel; Beňa, Luboslav; Biancone, Luigi; Cuna, Vania; Díaz-Corte, Carmen; Dufay, Alexandre; Gaasbeek, André; Garnier, Arnaud; Gatault, Philippe; Gentil Govantes, Miguel Angel; Glowacki, François; Gross, Oliver; Hurault de Ligny, Bruno; Huynh-Do, Uyen; Janbon, Bénédicte; Jiménez Del Cerro, Luis Antonio; Keller, Frieder; La Manna, Gaetano; Lauzurica, Ricardo; Le Monies De Sagazan, Hervé; Thaiss, Friedrich; Legendre, Christophe; Martin, Séverine; Moal, Marie-Christine; Noël, Christian; Pillebout, Evangeline; Piredda, Gian Benedetto; Puga, Ana Ramírez; Sulowicz, Wladyslaw; Tuglular, Serhan; Prokopova, Michaela; Chesneau, Mélanie; Le Moine, Alain; Guérif, Pierrick; Soulillou, Jean-Paul; Abramowicz, Marc; Giral, Magali; Racapé, Judith; Maggiore, Umberto; Brouard, Sophie; Abramowicz, Daniel

2016-06-01

Kidney recipients maintaining a prolonged allograft survival in the absence of immunosuppressive drugs and without evidence of rejection are supposed to be exceptional. The ERA-EDTA-DESCARTES working group together with Nantes University launched a European-wide survey to identify new patients, describe them and estimate their frequency for the first time. Seventeen coordinators distributed a questionnaire in 256 transplant centres and 28 countries in order to report as many 'operationally tolerant' patients (TOL; defined as having a serum creatinine <1.7 mg/dL and proteinuria <1 g/day or g/g creatinine despite at least 1 year without any immunosuppressive drug) and 'almost tolerant' patients (minimally immunosuppressed patients (MIS) receiving low-dose steroids) as possible. We reported their number and the total number of kidney transplants performed at each centre to calculate their frequency. One hundred and forty-seven questionnaires were returned and we identified 66 TOL (61 with complete data) and 34 MIS patients. Of the 61 TOL patients, 26 were previously described by the Nantes group and 35 new patients are presented here. Most of them were noncompliant patients. At data collection, 31/35 patients were alive and 22/31 still operationally tolerant. For the remaining 9/31, 2 were restarted on immunosuppressive drugs and 7 had rising creatinine of whom 3 resumed dialysis. Considering all patients, 10-year death-censored graft survival post-immunosuppression weaning reached 85% in TOL patients and 100% in MIS patients. With 218 913 kidney recipients surveyed, cumulative incidences of operational tolerance and almost tolerance were estimated at 3 and 1.5 per 10 000 kidney recipients, respectively. In kidney transplantation, operational tolerance and almost tolerance are infrequent findings associated with excellent long-term death-censored graft survival. © The Author 2016. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

A new class of organic nitrates: investigations on bioactivation, tolerance and cross-tolerance phenomena.

Science.gov (United States)

Schuhmacher, S; Schulz, E; Oelze, M; König, A; Roegler, C; Lange, K; Sydow, L; Kawamoto, T; Wenzel, P; Münzel, T; Lehmann, J; Daiber, A

2009-09-01

The chronic use of organic nitrates is limited by serious side effects including oxidative stress, nitrate tolerance and/or endothelial dysfunction. The side effects and potency of nitroglycerine depend on mitochondrial aldehyde dehydrogenase (ALDH-2). We sought to determine whether this concept can be extended to a new class of organic nitrates with amino moieties (aminoalkyl nitrates). Vasodilator potency of the organic nitrates, in vitro tolerance and in vivo tolerance (after continuous infusion for 3 days) were assessed in wild-type and ALDH-2 knockout mice by isometric tension studies. Mitochondrial oxidative stress was analysed by L-012-dependent chemiluminescence and protein tyrosine nitration. Aminoethyl nitrate (AEN) showed an almost similar potency to glyceryl trinitrate (GTN), even though it is only a mononitrate. AEN-dependent vasodilatation was mediated by cGMP and nitric oxide. In contrast to triethanolamine trinitrate (TEAN) and GTN, AEN bioactivation did not depend on ALDH-2 and caused no in vitro tolerance. In vivo treatment with TEAN and GTN, but not with AEN, induced cross-tolerance to acetylcholine (ACh)-dependent and GTN-dependent relaxation. Although all nitrates tested induced tolerance to themselves, only TEAN and GTN significantly increased mitochondrial oxidative stress in vitro and in vivo. The present results demonstrate that not all high potency nitrates are bioactivated by ALDH-2 and that high potency of a given nitrate is not necessarily associated with induction of oxidative stress or nitrate tolerance. Obviously, there are distinct pathways for bioactivation of organic nitrates, which for AEN may involve xanthine oxidoreductase rather than P450 enzymes.

Commercialization of radiation tolerant camera

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Bum; Choi, Young Soo; Kim, Sun Ku; Lee, Jong Min; Cha, Bung Hun; Lee, Nam Ho; Byun, Eiy Gyo; Yoo, Seun Wook; Choi, Bum Ki; Yoon, Sung Up; Kim, Hyun Gun; Sin, Jeong Hun; So, Suk Il

1999-12-01

In this project, radiation tolerant camera which tolerates 10{sup 6} - 10{sup 8} rad total dose is developed. In order to develop radiation tolerant camera, radiation effect of camera components was examined and evaluated, and camera configuration was studied. By the result of evaluation, the components were decided and design was performed. Vidicon tube was selected to use by image sensor and non-browning optics and camera driving circuit were applied. The controller needed for CCTV camera system, lens, light, pan/tilt controller, was designed by the concept of remote control. And two type of radiation tolerant camera were fabricated consider to use in underwater environment or normal environment. (author)

Commercialization of radiation tolerant camera

International Nuclear Information System (INIS)

Lee, Yong Bum; Choi, Young Soo; Kim, Sun Ku; Lee, Jong Min; Cha, Bung Hun; Lee, Nam Ho; Byun, Eiy Gyo; Yoo, Seun Wook; Choi, Bum Ki; Yoon, Sung Up; Kim, Hyun Gun; Sin, Jeong Hun; So, Suk Il

1999-12-01

In this project, radiation tolerant camera which tolerates 10 6 - 10 8 rad total dose is developed. In order to develop radiation tolerant camera, radiation effect of camera components was examined and evaluated, and camera configuration was studied. By the result of evaluation, the components were decided and design was performed. Vidicon tube was selected to use by image sensor and non-browning optics and camera driving circuit were applied. The controller needed for CCTV camera system, lens, light, pan/tilt controller, was designed by the concept of remote control. And two type of radiation tolerant camera were fabricated consider to use in underwater environment or normal environment. (author)

Reassessment of the putative role of BLK-p.A71T loss-of-function mutation in MODY and type 2 diabetes

DEFF Research Database (Denmark)

Bonnefond, A; Yengo, L; Philippe, J

2013-01-01

MODY is believed to be caused by at least 13 different genes. Five rare mutations at the BLK locus, including only one non-synonymous p.A71T variant, were reported to segregate with diabetes in three MODY families. The p.A71T mutation was shown to abolish the enhancing effect of BLK on insulin...... content and secretion from pancreatic beta cell lines. Here, we reassessed the contribution of BLK to MODY and tested the effect of BLK-p.A71T on type 2 diabetes risk and variations in related traits....

Return to Black Mountain palaeomagnetic reassessment of the Chatsworth and Ninmaroo formations, western Queensland, Australia

CERN Document Server

Anderson, K L; Lackie, M A; Schmidt, P W; 10.1111/j.1365-246X.2003.02164.x

2004-01-01

Palaeomagnetic results from late Middle Cambrian-Early Ordovician carbonate sequences sampled at Black Mountain (Mt Unbunmaroo), Mt Datson and near Chatsworth Station (southeastern Georgina Basin) are presented. A palaeomagnetic reassessment of these carbonates was designed in an effort to constrain regional magnetization ages as results from an earlier study, conducted at Mt Unbunmaroo, play a pivotal role in a proposed Cambrian inertial interchange true polar wander (IITPW) event. Remanent magnetizations within these carbonates were found to be variably developed with most specimens displaying two of the five isolated components. Component PF, for which goethite is the identified remanence carrier, is thought to reflect a chemical remanent magnetization of recent origin. Component TR, held by haematite, has a palaeomagnetic pole consistent with the Tertiary segment of Australia's apparent polar wander path (APWP) and most probably was acquired as a consequence of prolonged weathering during this period. The...

Making Place for a Viking Fortress. An archaeological and geophysical reassessment of Aggersborg, Denmark

Directory of Open Access Journals (Sweden)

Hannah Brown

2014-06-01

Full Text Available This article revisits the archaeology of the Viking-age settlement and ring fortress at Aggersborg, Denmark, based on a large-scale geophysical survey using magnetic gradiometry and ground-penetrating radar, as well as legacy excavation data. Late 10th-century Aggersborg, the largest known fortress in Viking-age Scandinavia, commanded a key position at the narrow strait of the Limfjord, a principal sailing route between the Baltic and the North Sea. Previous excavations established that this location was on the site of an earlier settlement, which was burned-down prior to the construction of the fortress. The character and extent of this prior activity, however, have hitherto remained ill-defined. The geophysical survey identifies previously unknown elements of the fortress structures and elucidates the extent and character of the earlier settlement. The analysis is combined with a comprehensive reconsideration of primary data from early excavations, and demonstrates how this evidence can guide the interpretation of geophysical data to yield a detailed reassessment of spatial structure, and even suggest chronological phasing. The excavation trenches show dense traces of occupation with a large number of sunken-featured buildings (SFBs. Anomalies consistent with similar features are mapped in the geophysical surveys, and their distribution is shown to complement results from the excavations, demonstrating the important contribution of non-invasive survey to our knowledge of scheduled monuments. The surveys suggest that the total number of SFBs may be as high as 350, equal to or exceeding the largest number of such buildings previously identified at any site in Scandinavia. The ring fortress, by implication, must have replaced a site of particular function or importance, albeit of a very different organisation. An interpretation of the communication landscape is combined with a visibility analysis to argue that the long-term significance of the

Diagnosis and fault-tolerant control

CERN Document Server

Blanke, Mogens; Lunze, Jan; Staroswiecki, Marcel

2016-01-01

Fault-tolerant control aims at a gradual shutdown response in automated systems when faults occur. It satisfies the industrial demand for enhanced availability and safety, in contrast to traditional reactions to faults, which bring about sudden shutdowns and loss of availability. The book presents effective model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, to test the fault detectability and to find the redundancies in the process that can be used to ensure fault tolerance. It also introduces design methods suitable for diagnostic systems and fault-tolerant controllers for continuous processes that are described by analytical models of discrete-event systems represented by automata. The book is suitable for engineering students, engineers in industry and researchers who wish to get an overview of the variety of approaches to process diagnosis and fault-tolerant contro...

Antibiotic tolerance and microbial biofilms

DEFF Research Database (Denmark)

Folkesson, Anders

Increased tolerance to antimicrobial agents is thought to be an important feature of microbes growing in biofilms. We study the dynamics of antibiotic action within hydrodynamic flow chamber biofilms of Escherichia coli and Pseudomonas aeruginosa using isogenic mutants and fluorescent gene...... expression reporters and we address the question of how biofilm organization affects antibiotic susceptibility. The dynamics of microbial killing is monitored by viable count determination, and confocal laser microscopy. Our work shows that the apparent increased antibiotic tolerance is due to the formation...... of antibiotic tolerant subpopulations within the biofilm. The formation of these subpopulations is highly variable and dependent on the antibiotic used, the biofilm structural organization and the induction of specific tolerance mechanisms....

Reassessment of MLST schemes for Leptospira spp. typing worldwide.

Science.gov (United States)

Varni, Vanina; Ruybal, Paula; Lauthier, Juan José; Tomasini, Nicolás; Brihuega, Bibiana; Koval, Ariel; Caimi, Karina

2014-03-01

Leptospirosis is a neglected zoonosis of global importance. Several multilocus sequence typing (MLST) methods have been developed for Leptospira spp., the causative agent of leptospirosis. In this study we reassessed the most commonly used MLST schemes in a set of worldwide isolates, in order to select the loci that achieve the maximum power of discrimination for typing Leptospira spp. Global eBURST algorithm was used to detect clonal complexes among STs and phylogenetic relationships among concatenated and individual sequences were inferred through maximum likelihood (ML) analysis. The evaluation of 12 loci combined to type a subset of strains rendered 57 different STs. Seven of these loci were selected into a final scheme upon studying the number of alleles and polymorphisms, the typing efficiency, the discriminatory power and the ratio dN/dS per nucleotide site for each locus. This new 7-locus scheme was applied to a wider collection of worldwide strains. The ML tree constructed from concatenated sequences of the 7 loci identified 6 major clusters corresponding to 6 Leptospira species. Global eBURST established 8 CCs, which showed that genotypes were clearly related by geographic origin and host. ST52 and ST47, represented mostly by Argentinian isolates, grouped the higher number of isolates. These isolates were serotyped as serogroups Pomona and Icterohaemorrhagiae, showing a unidirectional correlation in which the isolates with the same ST belong to the same serogroup. In summary, this scheme combines the best loci from the most widely used MLST schemes for Leptospira spp. and supports worldwide strains classification. The Argentinian isolates exhibited congruence between allelic profile and serogroup, providing an alternative to serological methods. Published by Elsevier B.V.

Toleration out of respect?

DEFF Research Database (Denmark)

Lægaard, Sune

2014-01-01

be based on a modus vivendi designed to secure peaceful co-existence, but should be based on moral reasons. Forst therefore advances what he calls the ‘respect conception’ of toleration as an in itself morally desirable type of relationship, which is furthermore the only conception of toleration...

State Toleration, Religious Recognition and Equality

DEFF Research Database (Denmark)

Lægaard, Sune

2013-01-01

In debates about multiculturalism, it is widely claimed that ‘toleration is not enough’ and that we need to go ‘beyond toleration’ to some form of politics of recognition in order to satisfactorily address contemporary forms of cultural diversity (e.g. the presence in Europe of Muslim minorities...... a conceptual question of whether the relation between states and minorities can be categoriseized in terms of recognition or toleration, but about a normative question of whether and how toleration and recognition secures equality. When toleration is inadequate, this is often because it institutionaliseizes...... and upholds specific inequalities. But politics of recognition may equally well institute inequalities, and in such cases unequal recognition may not be preferable to toleration....

75 FR 17566 - Flutolanil; Pesticide Tolerances

Science.gov (United States)

2010-04-07

... ppm, and the greater tolerance value is needed to accommodate indirect residues from soybean..., and soybean hay at 2.5 ppm are being revoked since the same tolerance values are being established...; Pesticide Tolerances AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This...

Reassessing Subjectivity, Criticality, and Inclusivity: Marcuse's Challenge to Adult Education.

Science.gov (United States)

Brookfield, Stephen

2002-01-01

Although Herbert Marcuse did not write as an adult educator, his analysis of subjectivity, criticality, and inclusivity has implications for adult education. He demonstrated how apparently humanistic tolerance for diversity can be manipulated to reinforce dominant ideology, and he made a case for aesthetic education as a site for critical…

Regulatory focus affects physician risk tolerance.

Science.gov (United States)

Veazie, Peter J; McIntosh, Scott; Chapman, Benjamin P; Dolan, James G

2014-01-01

Risk tolerance is a source of variation in physician decision-making. This variation, if independent of clinical concerns, can result in mistaken utilization of health services. To address such problems, it will be helpful to identify nonclinical factors of risk tolerance, particularly those amendable to intervention-regulatory focus theory suggests such a factor. This study tested whether regulatory focus affects risk tolerance among primary care physicians. Twenty-seven primary care physicians were assigned to promotion-focused or prevention-focused manipulations and compared on the Risk Taking Attitudes in Medical Decision Making scale using a randomization test. Results provide evidence that physicians assigned to the promotion-focus manipulation adopted an attitude of greater risk tolerance than the physicians assigned to the prevention-focused manipulation (p = 0.01). The Cohen's d statistic was conventionally large at 0.92. Results imply that situational regulatory focus in primary care physicians affects risk tolerance and may thereby be a nonclinical source of practice variation. Results also provide marginal evidence that chronic regulatory focus is associated with risk tolerance (p = 0.05), but the mechanism remains unclear. Research and intervention targeting physician risk tolerance may benefit by considering situational regulatory focus as an explanatory factor.

Synthesis of Fault-Tolerant Embedded Systems

DEFF Research Database (Denmark)

Eles, Petru; Izosimov, Viacheslav; Pop, Paul

2008-01-01

This work addresses the issue of design optimization for fault- tolerant hard real-time systems. In particular, our focus is on the handling of transient faults using both checkpointing with rollback recovery and active replication. Fault tolerant schedules are generated based on a conditional...... process graph representation. The formulated system synthesis approaches decide the assignment of fault-tolerance policies to processes, the optimal placement of checkpoints and the mapping of processes to processors, such that multiple transient faults are tolerated, transparency requirements...

Tolerance-Based Feature Transforms

NARCIS (Netherlands)

Reniers, Dennie; Telea, Alexandru

2007-01-01

Tolerance-based feature transforms (TFTs) assign to each pixel in an image not only the nearest feature pixels on the boundary (origins), but all origins from the minimum distance up to a user-defined tolerance. In this paper, we compare four simple-to-implement methods for computing TFTs on binary

78 FR 18511 - Thiamethoxam; Pesticide Tolerances

Science.gov (United States)

2013-03-27

... Health Risk Assessment of New Uses on Strawberry, Pistachio, and Citrus; New Tolerance for Tea; and... Uses on Strawberry, Pistachio, and Citrus; New Tolerance for Tea; and Revised PHI and Tolerance for... ``Clothianidin--Aggregate Human Health Risk Assessment of New Uses on Strawberry, Pistachio, and Citrus; New...

40 CFR 180.564 - Indoxacarb; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Indoxacarb; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.564 Indoxacarb; tolerances for residues. (a) General. Tolerances are established for residues of...

Between Hype and Understatement: Reassessing Cyber Risks as a Security Strategy

Directory of Open Access Journals (Sweden)

Audrey Guinchard

2011-01-01

Full Text Available Most of the actions that fall under the trilogy of cyber crime, terrorism,and war exploit pre-existing weaknesses in the underlying technology.Because these vulnerabilities that exist in the network are not themselvesillegal, they tend to be overlooked in the debate on cyber security. A UKreport on the cost of cyber crime illustrates this approach. Its authors chose to exclude from their analysis the costs in anticipation of cyber crime, such as insurance costs and the costs of purchasing anti-virus software on the basis that "these are likely to be factored into normal day-to-day expenditures for the Government, businesses, and individuals. This article contends if these costs had been quantified and integrated into the cost of cyber crime, then the analysis would have revealed that what matters is not so much cyber crime, but the fertile terrain of vulnerabilities that unleash a range of possibilities to whomever wishes to exploit them. By downplaying the vulnerabilities, the threats represented by cyber war, cyber terrorism, and cyber crime are conversely inflated. Therefore, reassessing risk as a strategy for security in cyberspace must include acknowledgment of understated vulnerabilities, as well as a better distributed knowledge about the nature and character of the overhyped threats of cyber crime, cyber terrorism, and cyber war.

Experimental study and thermodynamic re-assessment of the Al-B system

Energy Technology Data Exchange (ETDEWEB)

Mirkovic, Djordje; Groebner, Joachim; Schmid-Fetzer, Rainer; Fabrichnaya, Olga; Lukas, Hans Leo

2004-12-14

Controversial thermodynamic data in previous assessments of the Al-B system were used to identify a key experiment regarding the enthalpy of formation of AlB{sub 2} and its peritectic decomposition temperature. Experiments were performed using AlB{sub 2} powder purified by vacuum sublimation. Differential scanning calorimetry (DSC) in a heat-flux twin cylindrical Calvet-type calorimetric system was utilized to measure the enthalpy of decomposition and the reaction temperatures. Samples were characterized by X-ray powder diffraction (XRD). Based on that, a comprehensive and consistent re-assessment of the Al-B system was performed. The incongruent melting of AlB{sub 2} occurs at 972 deg. C and a eutectoid decomposition of AlB{sub 2} at 213 deg. C is predicted from the thermodynamic description. The present enthalpy data are supported by realistic values of absolute entropies of solid Al-B phases. The formation of AlB{sub 2} was never observed on cooling, it is extremely sluggish. Upon heating AlB{sub 2}, the peritectic reaction does not produce perfectly crystalline AlB{sub 12}. Based on that and constraints in the thermodynamic data, it is derived that the stability range of AlB{sub 2} in equilibrium with perfect crystalline AlB{sub 12} may be even more narrow than 972-213 deg. C.

Tolerance – a Culturally Dependent Concept?

Directory of Open Access Journals (Sweden)

Trond Jørgensen

2014-12-01

Full Text Available This article presents research on Japanese interpretations of the first article of the Universal Declaration of Human Rights as a point of departure for discussing how the Japanese cultural contexts present an alternative understanding of tolerance to the Western liberal. According to Rainer Forst, tolerance is a normatively dependent concept (Forst 2010. This implies that the specific cultural values or the ‘normative context’ and environment become relevant. Since the praxis of tolerance always takes place in a specific cultural and moral environment, the cultural context influences how tolerance is carried out in practice as well as the norms defining its limits. Japanese informants held that cultural norms and values in Japan differ somewhat from those in the West. They perceived the human rights discourse as culturally dependent and culturally marked and clearly considered the first article of the Universal Declaration of Human Rights to be a product of Western thought. It states that ‘All human beings are born free and equal in dignity and rights. They are endowed with reason and conscience and should act towards one another in the spirit of brotherhood’ (United Nations 1948. While the role of tolerance in Western political philosophy seems to be attached to liberal values of autonomy and freedom, the Confucian-influenced environment in Japan places more emphasis on inter-dependency, cultivation, and learning social rules and proper-place-occupation as bases for moral conduct and deserving of respect. According to the Japanese informants, people are not ‘born with rights’ or ‘born free and equal’. Maintaining harmony, consensus, and proper behaviour according to relationships and hierarchy creates a different kind of setting for tolerance. The inter-dependent perspectives of Japanese culture may restrain freedom and can thus be expected to limit toleration of divergent views or behaviour. The culture-specific perception of

77 FR 49732 - Cyprodinil; Pesticide Tolerances

Science.gov (United States)

2012-08-17

.../puree (1x) and lemon/lime juice (1x) were used to modify the tolerance values. iii. Cancer. Based on the... the tolerance necessitate a higher value. Additionally, Codex has an established MRL on grape at 3 ppm...; Pesticide Tolerances AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This...

Fault tolerant computing systems

International Nuclear Information System (INIS)

Randell, B.

1981-01-01

Fault tolerance involves the provision of strategies for error detection damage assessment, fault treatment and error recovery. A survey is given of the different sorts of strategies used in highly reliable computing systems, together with an outline of recent research on the problems of providing fault tolerance in parallel and distributed computing systems. (orig.)

Interference of intrinsic UV response of LiF:Mg,Ti (Poland) pellets in dose reassessment

International Nuclear Information System (INIS)

Bhasin, B.D.; Kalyane, G.N.; Kathuria, S.P.; Sunta, C.M.

1987-01-01

The thermoluminescence (TL) behaviour of sintered pellets of LiF:Mg,Ti (Poland) (LiF(P)) is markedly different from that of LiF:Mg,Ti TLD-100 (Harshaw) phosphor as far as their intrinsic responses to ultraviolet (UV) (253.7 nm) radiation are concerned. The intrinsic response of LiF(P) phosphor is very much dependent on the physical form of the phosphor. In addition, it is highly sensitive to any changes in experimental conditions such as the nature of the atmosphere during readout, the pre-heat and the readout history of the phosphor. The high intrinsic UV response (IUVR) of LiF(P) interferes in the dose reassessment by the PTTL (photo-transferred thermoluminescence) technique. Nevertheless, a fortuitous situation exists wherein a PTTL dosimetry peak signal is seen clearly over-riding the IUVR valley at the corresponding point of the glow curve. A procedure to correct for the IUVR interference and to re-estimate the dose by the PTTL technique is described. (author)

Reassessment of debris ingestion effects on emergency core cooling-system pump performance

International Nuclear Information System (INIS)

Sciacca, F.W.; Rao, D.V.

2004-01-01

A study sponsored by the United States (US) Nuclear Regulatory Commission (NRC) was performed to reassess the effects of ingesting loss of coolant accident (LOCA) generated materials into emergency core cooling system (ECCS) pumps and the subsequent impact of this debris on the pumps' ability to provide long-term cooling to the reactor core. ECCS intake systems have been designed to screen out large post-LOCA debris materials. However, small-sized debris can penetrate these intake strainers or screens and reach critical pump components. Prior NRC-sponsored evaluations of possible debris and gas ingestion into ECCS pumps and attendant impacts on pump performance were performed in the early 1980's. The earlier study focused primarily on pressurised water reactor (PWR) ECCS pumps. This issue was revisited both to factor in our improved knowledge of LOCA generated debris and to address specifically both boiling water reactor (BWR) and PWR ECCS pumps. This study discusses the potential effects of ingested debris on pump seals, bearing assemblies, cyclone debris separators, and seal cooling water subsystems. This assessment included both near-term (less than one hour) and long-term (greater than one hour) effects introduced by the postulated LOCA. The work reported herein was performed during 1996-1997. (authors)

Algorithms for worst-case tolerance optimization

DEFF Research Database (Denmark)

Schjær-Jacobsen, Hans; Madsen, Kaj

1979-01-01

New algorithms are presented for the solution of optimum tolerance assignment problems. The problems considered are defined mathematically as a worst-case problem (WCP), a fixed tolerance problem (FTP), and a variable tolerance problem (VTP). The basic optimization problem without tolerances...... is denoted the zero tolerance problem (ZTP). For solution of the WCP we suggest application of interval arithmetic and also alternative methods. For solution of the FTP an algorithm is suggested which is conceptually similar to algorithms previously developed by the authors for the ZTP. Finally, the VTP...... is solved by a double-iterative algorithm in which the inner iteration is performed by the FTP- algorithm. The application of the algorithm is demonstrated by means of relatively simple numerical examples. Basic properties, such as convergence properties, are displayed based on the examples....

Development of a more fish-tolerant turbine runner, advanced hydropower turbine project

International Nuclear Information System (INIS)

Cook, T.C.; Hecker, G.E.

1997-02-01

Alden Research Laboratory, Inc. (ARL) and Northern Research and Engineering Corporation (NREC) conducted a research program to develop a turbine runner which will minimize fish injury and mortality at hydroelectric projects. ARL?NREC have developed a runner shape which minimizes the number of blade leading edges, reduces the pressure versus time and the velocity versus distance gradients within the runner, minimizes or eliminates the clearance between the runner and runner housing, and maximizes the size of the flow passages, all with minimal penalty on turbine efficiency. An existing pump impeller provided the starting point for developing the fish tolerant turbine runner. The Hidrostal pump is a single bladed combined screw/centrifugal pump which has been proven to transport fish with minimal injury. The focus of the ARL/NREC research project was to develop a new runner geometry which is effective in downstream fish passage and hydroelectric power generation. A flow of 1,000 cfs and a head in the range of 75 ft to 100 ft were selected for conceptual design of the new runner. Conceptual design of the new runner began with a re-evaluation of studies which have been previously conducted to identify probable sources of injury to fish passing through hydraulic turbines. Criteria relative to hydraulic characteristics which are favorable for fish passage were prepared based on a reassessment of the available information. Important criteria used to develop the new runner design included low pressure change rates, minimum absolute pressures, and minimum shear. Other criteria which are reflected in the runner design are a minimum number of blades (only two), minimum total length of leading edges, and large flow passages. 86 figs., 5 tabs

75 FR 26673 - Clethodim; Pesticide Tolerances

Science.gov (United States)

2010-05-12

... regulation establishes tolerances for residues of clethodim in or on the raw agricultural commodity artichoke... clethodim, in or on the raw agricultural commodity artichoke, globe at 1.3 parts per million (ppm... bushberry subgroup 13-07B tolerance from 3.0 ppm to 0.20 ppm and the globe artichoke tolerance from 1.3 ppm...

15 CFR 750.11 - Shipping tolerances.

Science.gov (United States)

2010-01-01

... in the ECCN applicable to your item reads “ $ value” or “in $ value”, there is no shipping tolerance... is no shipping tolerance with respect to the number of units. However, the value of all of your... shipping tolerance on this license because the items are controlled by an ECCN where “$ value” is the...

Resistance of transplantation tolerance to X-irradiation

Energy Technology Data Exchange (ETDEWEB)

Holan, V; Hasek, M; Chutna, J [Czechoslovak Academy of Sciences, Prague. Institute of Molecular Genetics

1979-04-01

With regard to the previous finding that suppressor cells participating in the state of transplantation tolerance were radiosensitive, the possibility was investigated whether tolerance can be abolished by irradiation. In the rat model used (AVN recipients, Lewis donors), both neonatally induced tolerance and tolerance induced in the adult life by the transfer of suppressor cells were found to be radioresistant.

A Critical Reassessment of the Hess–Murray Law

Directory of Open Access Journals (Sweden)

Enrico Sciubba

2016-08-01

Full Text Available The Hess–Murray law is a correlation between the radii of successive branchings in bi/trifurcated vessels in biological tissues. First proposed by the Swiss physiologist and Nobel laureate Walter Rudolf Hess in his 1914 doctoral thesis and published in 1917, the law was “rediscovered” by the American physiologist Cecil Dunmore Murray in 1926. The law is based on the assumption that blood or lymph circulation in living organisms is governed by a “work minimization” principle that—under a certain set of specified conditions—leads to an “optimal branching ratio” of r i + 1 r i = 1 2 3 = 0.7937 . This “cubic root of 2” correlation underwent extensive theoretical and experimental reassessment in the second half of the 20th century, and the results indicate that—under a well-defined series of conditions—the law is sufficiently accurate for the smallest vessels (r of the order of fractions of millimeter but fails for the larger ones; moreover, it cannot be successfully extended to turbulent flows. Recent comparisons with numerical investigations of branched flows led to similar conclusions. More recently, the Hess–Murray law came back into the limelight when it was taken as a founding paradigm of the Constructal Law, a theory that employs physical intuition and mathematical reasoning to derive “optimal paths” for the transport of matter and energy between a source and a sink, regardless of the mode of transportation (continuous, like in convection and conduction, or discrete, like in the transportation of goods and people. This paper examines the foundation of the law and argues that both for natural flows and for engineering designs, a minimization of the irreversibility under physically sound boundary conditions leads to somewhat different results. It is also shown that, in the light of an exergy-based resource analysis, an amended version of the Hess–Murray law may still hold an important position in engineering and

Assertiveness and tolerance in cross-cultural interaction

Directory of Open Access Journals (Sweden)

Pochebut L.G.

2017-10-01

Full Text Available The article is devoted to the theoretical analysis of the concepts of tolerance and assertiveness. Problem of contemporary cross-cultural interaction is the need to shift strategy of tolerance on strategy of assertiveness. Considered the practice of multiculturalism based on the idea of tolerance. Six barriers to cross-cultural communication. Comparison of understanding tolerance in European, Arab, Eastern cultures and in Russia. Boundaries are considered manifestations of tolerance. Developed rules of tolerant behavior. Proposed in scientific analysis and in actual practice, intercultural strategy move to assertiveness. Tolerance is respect for the views of another person, provided that he respects your opinion. Assertiveness is the respect for the rights of another person, provided that it also respects your rights. Describes the ways in assertive behavior: the willingness to cooperate, the openness of conduct, allocation of responsibilities, defend their rights and interests, defining the way forward. Tactics developed in assertive behavior: “interests”, “anti-discrimination”, “achievement”, “standards”, “activity”, “goodwill”.

State of art in radiation tolerant camera

Energy Technology Data Exchange (ETDEWEB)

Choi; Young Soo; Kim, Seong Ho; Cho, Jae Wan; Kim, Chang Hoi; Seo, Young Chil

2002-02-01

Working in radiation environment such as nuclear power plant, RI facility, nuclear fuel fabrication facility, medical center has to be considered radiation exposure, and we can implement these job by remote observation and operation. However the camera used for general industry is weakened at radiation, so radiation-tolerant camera is needed for radiation environment. The application of radiation-tolerant camera system is nuclear industry, radio-active medical, aerospace, and so on. Specially nuclear industry, the demand is continuous in the inspection of nuclear boiler, exchange of pellet, inspection of nuclear waste. In the nuclear developed countries have been an effort to develop radiation-tolerant cameras. Now they have many kinds of radiation-tolerant cameras which can tolerate to 10{sup 6}-10{sup 8} rad total dose. In this report, we examine into the state-of-art about radiation-tolerant cameras, and analyze these technology. We want to grow up the concern of developing radiation-tolerant camera by this paper, and upgrade the level of domestic technology.

Pavlovian control of cross-tolerance between pentobarbital and ethanol.

Science.gov (United States)

Cappell, H; Roach, C; Poulos, C X

1981-01-01

Tolerance to several effects of a number of drugs has been shown to depend on Pavlovian conditioning processes. Experiment I extended the compensatory conditioning model (Siegel 1975) to tolerance to the hypothermic effect of pentobarbital (30 mg/kg). In Experiment I, rats that acquired hypothermic tolerance in one environment did not display tolerance when tested in an environment not previously associated with drug administration. In Experiment II, rats were made tolerant to the hypothermic effect of pentobarbital (30 mg/kg) and tested for cross-tolerance to ethanol (2.5 g/kg). Cross-tolerance was observed, but it was significantly reduced if the test was in an environment different from the one in which tolerance to pentobarbital was originally acquired. Thus, the compensatory conditioning model accounts for at least part of the tolerance and cross-tolerance to the thermic effects of alcohol and pentobarbital. The physiological processes in the CNS underlying tolerance and cross-tolerance for these drugs, therefore, are controlled by associative processes.

Establishing soil loss tolerance: an overview

Directory of Open Access Journals (Sweden)

Costanza Di Stefano

2016-09-01

Full Text Available Soil loss tolerance is a criterion for establishing if a soil is potentially subjected to erosion risk, productivity loss and if a river presents downstream over-sedimentation or other off-site effects are present at basin scale. At first this paper reviews the concept of tolerable soil loss and summarises the available definitions and the knowledge on the recommended values and evaluating criteria. Then a threshold soil loss value, at the annual temporal scale, established for limiting riling was used for defining the classical soil loss tolerance. Finally, some research needs on tolerable soil loss are listed.

Study of calcium-dependent lead-tolerance on plants differing in their level of Ca-deficiency tolerance

International Nuclear Information System (INIS)

Antosiewicz, Danuta Maria

2005-01-01

The main aim of the study was to determine the role of calcium in the amelioration of lead toxic effects in plants with accordingly high/low level of Pb-tolerance and high/low Ca-deficiency tolerance. The study was performed on maize, rye, tomato and mustard. Plants were cultivated in modified Knop's solution. They were subjected to Ca-deficiency, and to lead nitrate administered in the presence of four calcium nitrate concentrations 3.0, 2.4, 1.2, 0.3 mM. Lead-tolerance and tolerance to Ca-deficiency were determined, as were concentration of the studied elements in plant tissues, and the Pb deposition pattern at the ultrastructural level (electron microscopy study, X-ray microanalysis). In all studied plants, lead toxicity increased as medium calcium content decreased, however, only in the Ca-deficiency sensitive mustard with low Pb-tolerance was it accompanied by a rise in tissue lead concentration. In contrast, lead root and shoot levels did not increase in the highly Ca-deficiency tolerant tomato, mustard and rye with high Pb-tolerance irrespective of the Ca 2+ regimens applied. Thus, in these plants, lead's unfavourable effects resulted only from the higher toxicity of the same amount of lead in tissues at low calcium in the medium. Of particular relevance is the finding by electron microscopy and X-ray microanalysis, that under low calcium in both highly Ca-deficiency tolerant and Ca-deficiency sensitive plants, less efficient Pb 2+ detoxification was accompanied by the restriction of the formation of large lead deposits in cell walls. Obtained results are novel in demonstrating calcium involvement in the lead deposition in the cell wall, thus in the regulation of the internal lead detoxification. - Calcium regulated lead deposition in cell walls of plants

Reassessment of probabilistic seismic hazard in the Marmara region

Science.gov (United States)

Kalkan, Erol; Gulkan, Polat; Yilmaz, Nazan; Çelebi, Mehmet

2009-01-01

In 1999, the eastern coastline of the Marmara region (Turkey) witnessed increased seismic activity on the North Anatolian fault (NAF) system with two damaging earthquakes (M 7.4 Kocaeli and M 7.2 D??zce) that occurred almost three months apart. These events have reduced stress on the western segment of the NAF where it continues under the Marmara Sea. The undersea fault segments have been recently explored using bathymetric and reflection surveys. These recent findings helped scientists to understand the seismotectonic environment of the Marmara basin, which has remained a perplexing tectonic domain. On the basis of collected new data, seismic hazard of the Marmara region is reassessed using a probabilistic approach. Two different earthquake source models: (1) the smoothed-gridded seismicity model and (2) fault model and alternate magnitude-frequency relations, Gutenberg-Richter and characteristic, were used with local and imported ground-motion-prediction equations. Regional exposure is computed and quantified on a set of hazard maps that provide peak horizontal ground acceleration (PGA) and spectral acceleration at 0.2 and 1.0 sec on uniform firm-rock site condition (760 m=sec average shear wave velocity in the upper 30 m). These acceleration levels were computed for ground motions having 2% and 10% probabilities of exceedance in 50 yr, corresponding to return periods of about 2475 and 475 yr, respectively. The maximum PGA computed (at rock site) is 1.5g along the fault segments of the NAF zone extending into the Marmara Sea. The new maps generally show 10% to 15% increase for PGA, 0.2 and 1.0 sec spectral acceleration values across much of Marmara compared to previous regional hazard maps. Hazard curves and smooth design spectra for three site conditions: rock, soil, and soft-soil are provided for the Istanbul metropolitan area as possible tools in future risk estimates.

Tolerant Paternalism: Pro-ethical Design as a Resolution of the Dilemma of Toleration.

Science.gov (United States)

Floridi, Luciano

2016-12-01

Toleration is one of the fundamental principles that inform the design of a democratic and liberal society. Unfortunately, its adoption seems inconsistent with the adoption of paternalistically benevolent policies, which represent a valuable mechanism to improve individuals' well-being. In this paper, I refer to this tension as the dilemma of toleration. The dilemma is not new. It arises when an agent A would like to be tolerant and respectful towards another agent B's choices but, at the same time, A is altruistically concerned that a particular course of action would harm, or at least not improve, B's well-being, so A would also like to be helpful and seeks to ensure that B does not pursue such course of action, for B's sake and even against B's consent. In the article, I clarify the specific nature of the dilemma and show that several forms of paternalism, including those based on ethics by design and structural nudging, may not be suitable to resolve it. I then argue that one form of paternalism, based on pro-ethical design, can be compatible with toleration and hence with the respect for B's choices, by operating only at the informational and not at the structural level of a choice architecture. This provides a successful resolution of the dilemma, showing that tolerant paternalism is not an oxymoron but a viable approach to the design of a democratic and liberal society.

Mechanical tolerance stackup and analysis

CERN Document Server

Fischer, Bryan R

2011-01-01

Use Tolerance Analysis Techniques to Avoid Design, Quality, and Manufacturing Problems Before They Happen Often overlooked and misunderstood, tolerance analysis is a critical part of improving products and their design processes. Because all manufactured products are subject to variation, it is crucial that designers predict and understand how these changes can affect form, fit, and function of parts and assemblies--and then communicate their findings effectively. Written by one of the developers of ASME Y14.5 and other geometric dimension and tolerancing (GD&T) standards, Mechanical Tolerance

SIFT - Design and analysis of a fault-tolerant computer for aircraft control. [Software Implemented Fault Tolerant systems

Science.gov (United States)

Wensley, J. H.; Lamport, L.; Goldberg, J.; Green, M. W.; Levitt, K. N.; Melliar-Smith, P. M.; Shostak, R. E.; Weinstock, C. B.

1978-01-01

SIFT (Software Implemented Fault Tolerance) is an ultrareliable computer for critical aircraft control applications that achieves fault tolerance by the replication of tasks among processing units. The main processing units are off-the-shelf minicomputers, with standard microcomputers serving as the interface to the I/O system. Fault isolation is achieved by using a specially designed redundant bus system to interconnect the processing units. Error detection and analysis and system reconfiguration are performed by software. Iterative tasks are redundantly executed, and the results of each iteration are voted upon before being used. Thus, any single failure in a processing unit or bus can be tolerated with triplication of tasks, and subsequent failures can be tolerated after reconfiguration. Independent execution by separate processors means that the processors need only be loosely synchronized, and a novel fault-tolerant synchronization method is described.

40 CFR 180.586 - Clothianidin; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Clothianidin; tolerances for residues... § 180.586 Clothianidin; tolerances for residues. (a) General. Tolerances are established for residues of the insecticide clothianidin, including its metabolites and degradates. Compliance with the tolerance...

Historical Aspects in Tolerance Phenomenon Research

Directory of Open Access Journals (Sweden)

Janat A. Karmanova

2013-01-01

Full Text Available The article examines the historical aspect of the tolerance phenomenon research, particularly the study of tolerance in the age of Antiquity, Middle Ages, New Times, Enlightenment. It is remarkable that the problem of tolerance, emerged in Western civilization on religious grounds, laid the foundation for all other freedoms, attained in many countries. Besides, the article attaches special attention to the researchers of the East, such as Abu Nasr al-Farabi, Khoja Ahmed Yasawi, studies the historical aspect of works by Kazakhstan thinkers A. Kunanbayev, C. Valikhanova, K.B. Zharikbayev, S.K. Kaliyev, A.N. Nysanbayev, A.I. Artemev and others. The analysis of historical research of the tolerance phenomenon brings the author to the conclusion that religious freedom was the starting point for the emergence of new areas of tolerance display. The content of this phenomenon changed according to the historical peculiarities of the societies’ development

Microbial stress tolerance for biofuels. Systems biology

Energy Technology Data Exchange (ETDEWEB)

Liu, Zonglin Lewis (ed.) [National Center for Agricultural Utilization Research, USDA-ARS, Peoria, IL (United States)

2012-07-01

The development of sustainable and renewable biofuels is attracting growing interest. It is vital to develop robust microbial strains for biocatalysts that are able to function under multiple stress conditions. This Microbiology Monograph provides an overview of methods for studying microbial stress tolerance for biofuels applications using a systems biology approach. Topics covered range from mechanisms to methodology for yeast and bacteria, including the genomics of yeast tolerance and detoxification; genetics and regulation of glycogen and trehalose metabolism; programmed cell death; high gravity fermentations; ethanol tolerance; improving biomass sugar utilization by engineered Saccharomyces; the genomics on tolerance of Zymomonas mobilis; microbial solvent tolerance; control of stress tolerance in bacterial host organisms; metabolomics for ethanologenic yeast; automated proteomics work cell systems for strain improvement; and unification of gene expression data for comparable analyses under stress conditions. (orig.)

Fault-tolerant rotary actuator

Science.gov (United States)

Tesar, Delbert

2006-10-17

A fault-tolerant actuator module, in a single containment shell, containing two actuator subsystems that are either asymmetrically or symmetrically laid out is provided. Fault tolerance in the actuators of the present invention is achieved by the employment of dual sets of equal resources. Dual resources are integrated into single modules, with each having the external appearance and functionality of a single set of resources.

TaALMT1 promoter sequence compositions, acid tolerance, and Al tolerance in wheat cultivars and landraces from Sichuan in China.

Science.gov (United States)

Han, C; Dai, S F; Liu, D C; Pu, Z J; Wei, Y M; Zheng, Y L; Wen, D J; Zhao, L; Yan, Z H

2013-11-18

Previous genetic studies on wheat from various sources have indicated that aluminum (Al) tolerance may have originated independently in USA, Brazil, and China. Here, TaALMT1 promoter sequences of 92 landraces and cultivars from Sichuan, China, were sequenced. Five promoter types (I', II, III, IV, and V) were observed in 39 cultivars, and only three promoter types (I, II, and III) were observed in 53 landraces. Among the wheat collections worldwide, only the Chinese Spring (CS) landrace native to Sichuan, China, carried the TaALMT1 promoter type III. Besides CS, two other Sichuan-bred landraces and six cultivars with TaALMT1 promoter type III were identified in this study. In the phylogenetic tree constructed based on the TaALMT1 promoter sequences, type III formed a separate branch, which was supported by a high bootstrap value. It is likely that TaALMT1 promoter type III originated from Sichuan-bred wheat landraces of China. In addition, the landraces with promoter type I showed the lowest Al tolerance among all landraces and cultivars. Furthermore, the cultivars with promoter type IV showed better Al tolerance than landraces with promoter type II. A comparison of acid tolerance and Al tolerance between cultivars and landraces showed that the landraces had better acid tolerance than the cultivars, whereas the cultivars showed better Al tolerance than the landraces. Moreover, significant difference in Al tolerance was also observed between the cultivars raised by the National Ministry of Agriculture and by Sichuan Province. Among the landraces from different regions, those from the East showed better acid tolerance and Al tolerance than those from the South and West of Sichuan. Additional Al-tolerant and acid-tolerant wheat lines were also identified.

Pantex Plant Cell 12-44-1 tritium release: Re-assessment of environmental doses for 1990 to 1992

International Nuclear Information System (INIS)

Snyder, S.F.; Hwang, S.T.

1994-03-01

A release of tritium gas occurred within Cell 12-44-1 at the Pantex Plant on May 17, 1989. The release was the result of a nuclear component containment failure. This document summarizes past assessments and characterization of the release. From 1990 to 1992, the average annual dose to the offsite maximally exposed individual (MEI), re-assessed using updated methods and data, ranged from 9E-6 to 2E-4 mrem/y. Doses at this level are well below the regulatory dose limit and support the discontinuation of the distinct calculation of the MEI doses from the cell's tritium releases in future Pantex Annual Site Environmental Reports. Additional information provides guidance for the evaluation of similar releases in the future. Improved Environmental Protection Department sampling plans and assessment goals will increase the value of the data collected during future incidents

Reassessment of Ambulatory Blood Pressure Improves Renal Risk Stratification in Nondialysis Chronic Kidney Disease: Long-Term Cohort Study.

Science.gov (United States)

Minutolo, Roberto; Gabbai, Francis B; Chiodini, Paolo; Garofalo, Carlo; Stanzione, Giovanna; Liberti, Maria Elena; Pacilio, Mario; Borrelli, Silvio; Provenzano, Michele; Conte, Giuseppe; De Nicola, Luca

2015-09-01

In nondialysis chronic kidney disease, ambulatory blood pressure (ABP) performs better than clinic BP in predicting outcome, but whether repeated assessment of ABP further refines prognosis remains ill-defined. We recruited 182 consecutive hypertensive patients with nondialysis chronic kidney disease who underwent 2 ABPs 12 months apart to evaluate the enhancement in risk stratification provided by a second ABP obtained 1 year after baseline on the risk (hazard ratio and 95% confidence interval) of composite renal end point (death, chronic dialysis, and estimated glomerular filtration rate decline ≥40%). The difference in daytime and nighttime systolic BP between the 2 ABPs (daytime and nighttime bias) was added to a survival model including baseline ABP. Net reclassification improvement was also calculated. Age was 65.6±13.4 years; 36% had diabetes mellitus and 36% had previous cardiovascular event; estimated glomerular filtration rate was 42.2±19.6 mL/min per 1.73 m(2), and clinic BP was 145±18/80±11 mm Hg. Baseline ABP (daytime, 131±16/75±10 and nighttime, 122±18/66±10 mm Hg) and daytime/nighttime BP goals (58.2% and 43.4%) did not change at month 12. Besides baseline ABP values, bias for daytime and nighttime systolic BP linearly associated with renal outcome (1.12, 1.04-1.21 and 1.18, 1.08-1.29 for every 5-mm Hg increase, respectively). Classification of patients at risk improved when considering nighttime systolic level at second ABP (net reclassification improvement, 0.224; 95% confidence interval, 0.005-0.435). Patients with first and second ABPs above target showed greater renal risk (2.15, 1.29-3.59 and 1.71, 1.07-2.72, for daytime and nighttime, respectively). In nondialysis chronic kidney disease, reassessment of ABP at 1 year further refines renal prognosis; such reassessment should specifically be considered in patients with uncontrolled BP at baseline. © 2015 American Heart Association, Inc.

Incorporating Fault Tolerance Tactics in Software Architecture Patterns

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2008-01-01

One important way that an architecture impacts fault tolerance is by making it easy or hard to implement measures that improve fault tolerance. Many such measures are described as fault tolerance tactics. We studied how various fault tolerance tactics can be implemented in the best-known

Breaking Immunological Tolerance through OX40 (CD134

Directory of Open Access Journals (Sweden)

Pratima Bansal-Pakala

2001-01-01

Full Text Available Immunological tolerance represents a mechanism by which cells of the host remain protected from the immune system. Breaking of immunological tolerance can result in a variety of autoimmune diseases such as rheumatoid arthritis, diabetes, and multiple sclerosis. The reasons for tolerance breaking down and autoimmune processes arising are largely unknown but of obvious interest for therapeutic intervention of these diseases. Although reversal of the tolerant state is generally unwanted, there are instances where this may be of benefit to the host. In particular, one way a cancerous cell escapes being targeted by the immune system is through tolerance mechanisms that in effect turn off the reactivity of T lymphocytes that can respond to tumor-associated peptides. Thus tolerance represents a major obstacle in developing effective immunotherapy against tumors. The molecules that are involved in regulating immunological tolerance are then of interest as they may be great targets for positively or negatively manipulating the tolerance process.

Degree of Fault Tolerance as a Comprehensive Parameter for Reliability Evaluation of Fault Tolerant Electric Traction Drives

Directory of Open Access Journals (Sweden)

Igor Bolvashenkov

2016-09-01

Full Text Available This paper describes a new approach and methodology of quantitative assessment of the fault tolerance of electric power drive consisting of the multi-phase traction electric motor and multilevel electric inverter. It is suggested to consider such traction drive as a system with several degraded states. As a comprehensive parameter for evaluating of the fault tolerance, it is proposed to use the criterion of degree of the fault tolerance. For the approbation of the proposed method, the authors carried out research and obtained results of its practical application for evaluating the fault tolerance of the power train of an electrical helicopter.

7 CFR 51.346 - Tolerances.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Grades of Apples for Processing Tolerances § 51.346 Tolerances. When a lot of apples is...

7 CFR 51.306 - Tolerances.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Grades of Apples Tolerances § 51.306 Tolerances. In order to allow for variations incident to...

Legal Quality, Inequality, and Tolerance

DEFF Research Database (Denmark)

Bjørnskov, Christian

Previous findings suggest that income inequality leads to lower legal quality. This paper argues that voters' tolerance of inequality exerts an additional influence. Empirical findings suggest that inequality leads to lower legal quality due to its effect on trust while the tolerance of inequality...

Legal Quality, Inequality, and Tolerance

DEFF Research Database (Denmark)

Bjørnskov, Christian

2004-01-01

Previous findings suggest that income inequality leads to lower legal quality. This paper argues that voters' tolerance of inequality exerts an additional influence. Empirical findings suggest that inequality leads to lower legal quality due to its effect on trust while the tolerance of inequality...

Advanced cloud fault tolerance system

Science.gov (United States)

Sumangali, K.; Benny, Niketa

2017-11-01

Cloud computing has become a prevalent on-demand service on the internet to store, manage and process data. A pitfall that accompanies cloud computing is the failures that can be encountered in the cloud. To overcome these failures, we require a fault tolerance mechanism to abstract faults from users. We have proposed a fault tolerant architecture, which is a combination of proactive and reactive fault tolerance. This architecture essentially increases the reliability and the availability of the cloud. In the future, we would like to compare evaluations of our proposed architecture with existing architectures and further improve it.

QTLs for tolerance of drought and breeding for tolerance of abiotic and biotic stress: an integrated approach.

Directory of Open Access Journals (Sweden)

Shalabh Dixit

Full Text Available BACKGROUND: The coupling of biotic and abiotic stresses leads to high yield losses in rainfed rice (Oryza sativa L. growing areas. While several studies target these stresses independently, breeding strategies to combat multiple stresses seldom exist. This study reports an integrated strategy that combines QTL mapping and phenotypic selection to develop rice lines with high grain yield (GY under drought stress and non-stress conditions, and tolerance of rice blast. METHODOLOGY: A blast-tolerant BC2F3-derived population was developed from the cross of tropical japonica cultivar Moroberekan (blast- and drought-tolerant and high-yielding indica variety Swarna (blast- and drought-susceptible through phenotypic selection for blast tolerance at the BC2F2 generation. The population was studied for segregation distortion patterns and QTLs for GY under drought were identified along with study of epistatic interactions for the trait. RESULTS: Segregation distortion, in favour of Moroberekan, was observed at 50 of the 59 loci. Majority of these marker loci co-localized with known QTLs for blast tolerance or NBS-LRR disease resistance genes. Despite the presence of segregation distortion, high variation for DTF, PH and GY was observed and several QTLs were identified under drought stress and non-stress conditions for the three traits. Epistatic interactions were also detected for GY which explained a large proportion of phenotypic variance observed in the population. CONCLUSIONS: This strategy allowed us to identify QTLs for GY along with rapid development of high-yielding purelines tolerant to blast and drought with considerably reduced efforts. Apart from this, it also allowed us to study the effects of the selection cycle for blast tolerance. The developed lines were screened at IRRI and in the target environment, and drought and blast tolerant lines with high yield were identified. With tolerance to two major stresses and high yield potential, these

Enhancing drought tolerance in C(4) crops.

Science.gov (United States)

Lopes, Marta S; Araus, Jose Luis; van Heerden, Philippus D R; Foyer, Christine H

2011-05-01

Adaptation to abiotic stresses is a quantitative trait controlled by many different genes. Enhancing the tolerance of crop plants to abiotic stresses such as drought has therefore proved to be somewhat elusive in terms of plant breeding. While many C(4) species have significant agronomic importance, most of the research effort on improving drought tolerance has focused on maize. Ideally, drought tolerance has to be achieved without penalties in yield potential. Possibilities for success in this regard are highlighted by studies on maize hybrids performed over the last 70 years that have demonstrated that yield potential and enhanced stress tolerance are associated traits. However, while our understanding of the molecular mechanisms that enable plants to tolerate drought has increased considerably in recent years, there have been relatively few applications of DNA marker technologies in practical C(4) breeding programmes for improved stress tolerance. Moreover, until recently, targeted approaches to drought tolerance have concentrated largely on shoot parameters, particularly those associated with photosynthesis and stay green phenotypes, rather than on root traits such as soil moisture capture for transpiration, root architecture, and improvement of effective use of water. These root traits are now increasingly considered as important targets for yield improvement in C(4) plants under drought stress. Similarly, the molecular mechanisms underpinning heterosis have considerable potential for exploitation in enhancing drought stress tolerance. While current evidence points to the crucial importance of root traits in drought tolerance in C(4) plants, shoot traits may also be important in maintaining high yields during drought.

TOLERANCE: FEATURES AND PROBLEMS OF EVALUATION

Directory of Open Access Journals (Sweden)

M. V. Karmanov

2018-01-01

Full Text Available In the media and in specialized literature, publications related to attempts to assess the place and role of tolerance in the life of modern society are increasingly encountered. In this connection, a comprehensive scientific analysis of tolerance as an independent and distinctive object of applied research is of great scientific and practical interest. Considering the points of view on the category of "tolerance" gave grounds to believe that there are a number of "white spots" and gaps of methodological nature that do not allow collecting reliable information and identify the main indicators characterizing the state and features of the transformation of tolerance as a social norm reflecting changes in society's value orientations . Tolerance as a characteristic of the moral state of society is a "medal with two sides": on the one hand, it is positive that it promotes mutual understanding, taking into account the recognition of rights and freedoms, with the coordination of different motives, attitudes and orientations without violence and suppression of human dignity, allows to smooth existing irreconcilable interethnic, interethnic, racial contradictions; on the other negative, because it can be perceived as permissiveness, and instill indifference to values. All of the above was justification for the need to present in the article a critical analysis of approaches to the definition and directions of the study of tolerance, which made it possible to reveal its principal features as a complex and multifaceted object of statistical research. In order to implement the principle of objectivity of conclusions, the study was conducted using the following methods: analysis and synthesis, comparison and comparison, generalization, the method of scientific abstraction. The article presents a substantiation of the possibilities of making a quantitative assessment of changes in tolerance in time, taking into account the analysis of information sources

Social Studies Teachers’ Perceptions of Tolerance

Directory of Open Access Journals (Sweden)

Hatice Türe

2014-10-01

Full Text Available Problem: Tolerance is one of the values which citizens should have in today's multicultural and democratic society. Educational system should teach tolerance to the individuals in a democratic society. Tolerance can be given through curricula in educational process. Social studies is one of the courses for conducting tolerance education. Skills and perspectives of teachers are important for tolerance education in social studies. The purpose of this study is to understand social studies teachers' perceptions of tolerance. Method: In the study, qualitative research method and phenomenology that is one of the qualitative research designs was employed. The participants were determined using criterion sampling. 10 social studies teachers graduated from social studies education departments working at schools of Eskisehir Provincial Directorate of National Education participated in the study. The research process consisted of two phases. The data were gathered through semi-structured interviews. The interviews were conducted in two steps in order to make an in-depth analysis. In Phase I of the study, semi-structured interviews were conducted with 10 teachers in December and January months during the 2012-2013 school year. The data obtained from the first interviews were also the base for the questions in the second interviews. In Phase II of the study, semi-structured interviews were again conducted with 10 teachers who participated in the first interviews in April and May months during the 2012-2013 school year. Teacher Interview Form-1 in the first interviews and Teacher Interview Form-2 in the second interviews were used for data collection. As for data analysis, thematic analysis technique was used. The data were analysed, the findings were defined and interpreted based on the research questions. Findings: The findings of the study revealed that the social studies teachers described tolerance as respecting ideas, values, beliefs and behaviors

A Theory of Tolerance

OpenAIRE

Corneo, Giacomo; Jeanne, Olivier

2006-01-01

We develop an economic theory of tolerance where styles of behaviour are invested with symbolic value. Value systems are endogenous and taught by parents to their children. In conjunction with actual behaviour, value systems determine the esteem enjoyed by individuals. Intolerant individuals have all symbolic value invested in a single style of behaviour, whereas tolerant people have diversified values. The proposed model identifies a link between the unpredictability of children's lifestyles...

Metabolic adaption of ethanol-tolerant Clostridium thermocellum.

Directory of Open Access Journals (Sweden)

Xinshu Zhu

Full Text Available Clostridium thermocellum is a major candidate for bioethanol production via consolidated bioprocessing. However, the low ethanol tolerance of the organism dramatically impedes its usage in industry. To explore the mechanism of ethanol tolerance in this microorganism, systematic metabolomics was adopted to analyse the metabolic phenotypes of a C. thermocellum wild-type (WT strain and an ethanol-tolerant strain cultivated without (ET0 or with (ET3 3% (v/v exogenous ethanol. Metabolomics analysis elucidated that the levels of numerous metabolites in different pathways were changed for the metabolic adaption of ethanol-tolerant C. thermocellum. The most interesting phenomenon was that cellodextrin was significantly more accumulated in the ethanol-tolerant strain compared with the WT strain, although cellobiose was completely consumed in both the ethanol-tolerant and wild-type strains. These results suggest that the cellodextrin synthesis was active, which might be a potential mechanism for stress resistance. Moreover, the overflow of many intermediate metabolites, which indicates the metabolic imbalance, in the ET0 cultivation was more significant than in the WT and ET3 cultivations. This indicates that the metabolic balance of the ethanol-tolerant strain was adapted better to the condition of ethanol stress. This study provides additional insight into the mechanism of ethanol tolerance and is valuable for further metabolic engineering aimed at higher bioethanol production.

75 FR 68214 - Flubendiamide; Pesticide Tolerances; Technical Correction

Science.gov (United States)

2010-11-05

... typographical errors in the referenced rule, specifically, to revise incorrect tolerance values for the... tolerance value for the established tolerances for corn, field, grain (0.02 ppm); corn, field, stover (0.15... field trial and processing data, these tolerance values should be revised to 0.03 ppm; 15 ppm; 25 ppm...

Shaping tolerant attitudes towards immigrants

DEFF Research Database (Denmark)

Rapp, Carolin

2017-01-01

This article contributes to the ongoing discussion on how tolerance may be fostered in Western European countries and to the question of how contextual factors such as welfare state expenditures may contribute to this formation. Tolerance is understood as a basic democratic principle that helps c...

Pavlovian conditioning analysis of morphine tolerance.

Science.gov (United States)

Siegel, S

1978-01-01

It has been demonstrated that many conditional responses to a variety of drugs are opposite in direction to the unconditional effects of the drug, and the conditioning analysis of morphine tolerance emphasizes the fact that subjects with a history of morphine administration display morphine-compensatory conditional responses when confronted with the usual administration procedure but without the drug. Thus, when the drug is presented in the context of the usual administration cues, these conditional morphine-compensatory responses would be expected to attenuate the drug-induced unconditional responses, thereby decreasing the observed response to the drug. Research has been summarized which supports this compensatory conditioning model of tolerance by demonstrating that the display of tolerance is specific to the environment in which the drug has been previously administered. Further evidence supporting this theory of tolerance has been provided by studies establishing that extinction, partial reinforcement, and latent inhibition--non-pharmacological manipulations known to be effective in generally affecting the display of conditional responses--similarly affect the display of morphine tolerance. Additional research has suggested many parallels between learning and morphine tolerance: Both processes exhibit great retention, both are disrupted by electroconvulsive shock and frontal cortical stimulation, both are retarded by inhibitors of protein synthesis, and both are facilitated by antagonists of these metabolic inhibitors.

7 CFR 801.8 - Tolerances for sieves.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for sieves. 801.8 Section 801.8 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.8 Tolerances for sieves. The maintenance tolerances for sieves...

Glycogen synthase kinase-3 regulates inflammatory tolerance in astrocytes

Science.gov (United States)

Beurel, Eléonore; Jope, Richard S.

2010-01-01

Inflammatory tolerance is the down-regulation of inflammation upon repeated stimuli, which is well-established to occur in peripheral immune cells. However, less is known about inflammatory tolerance in the brain although it may provide an important protective mechanism from detrimental consequences of prolonged inflammation, which appears to occur in many psychiatric and neurodegenerative conditions. Array analysis of 308 inflammatory molecules produced by mouse primary astrocytes after two sequential stimulations with lipopolysaccharide (LPS) distinguished three classes, tolerant, sensitized and unaltered groups. For many of these inflammatory molecules, inhibition of glycogen synthase kinase-3 (GSK3) increased tolerance and reduced sensitization. Focusing on LPS-tolerance in interleukin-6 (IL-6) production, we found that microglia exhibited a strong tolerance response that matched that of macrophages, whereas astrocytes exhibited only partial tolerance. The astrocyte semi-tolerance was found to be regulated by GSK3. GSK3 inhibitors or knocking down GSK3 levels promoted LPS-tolerance and astrocytes expressing constitutively active GSK3 did not develop LPS-tolerance. These findings identify the critical role of GSK3 in counteracting IL-6 inflammatory tolerance in cells of the CNS, supporting the therapeutic potential of GSK3 inhibitors to reduce neuroinflammation by promoting tolerance. PMID:20553816

Reassessment of shielding calculations for a room housing a Cesium-137 irradiator

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Leticia S.; Barbosa, Rugles C., E-mail: leticia.fmufg@gmail.com, E-mail: rbarbosa@cnen.gov.br [Centro Regional de Ciências Nucleares do Centro Oeste (CRCN-CO/CNEN-GO), Abadia de Goiás, GO (Brazil); Rezende, Ana C.B., E-mail: anacbrz@gmail.com [Universidade Federal de Goiás (UFG), Goiânia, GO (Brazil). Escola de Engenharia

2017-07-01

This aim of this work is to reassess the shielding calculations for a room that houses an irradiator with cesium-137 ({sup 137}Cs) source with activity of 444GBq (12Ci). Shielding or barriers have the function of reducing the intensity of the radiation emitted by a radioactive source, are constituted by materials of high atomic number and guarantee the radiological protection in areas occupied by occupationally exposed individuals or by individuals of the public. The barriers located in the direction of the direct beam of radiation are called primary barriers and are thicker. Already the barriers that attenuate the radiation scattered by the radiated surface are called secondary barriers. In the new calculations, the thickness of the primary barrier was determined by model of the point nucleus model and for the secondary barriers, the differential albedo dose model was used. The results obtained show that all secondary barriers were constructed with overestimated thicknesses and that the radiological protection of individuals from the public and occupationally exposed individuals in the areas outside these barriers is guaranteed. The primary barrier was constructed with a thickness 8% smaller than the thickness obtained in the new calculations. In addition to shielding calculations, classification and signaling of adjacent areas were performed, including necessary emergency procedures. The necessary instrumentation for monitoring these areas was also determined. (author)

Reassessment of shielding calculations for a room housing a Cesium-137 irradiator

International Nuclear Information System (INIS)

Oliveira, Leticia S.; Barbosa, Rugles C.; Rezende, Ana C.B.

2017-01-01

This aim of this work is to reassess the shielding calculations for a room that houses an irradiator with cesium-137 ( 137 Cs) source with activity of 444GBq (12Ci). Shielding or barriers have the function of reducing the intensity of the radiation emitted by a radioactive source, are constituted by materials of high atomic number and guarantee the radiological protection in areas occupied by occupationally exposed individuals or by individuals of the public. The barriers located in the direction of the direct beam of radiation are called primary barriers and are thicker. Already the barriers that attenuate the radiation scattered by the radiated surface are called secondary barriers. In the new calculations, the thickness of the primary barrier was determined by model of the point nucleus model and for the secondary barriers, the differential albedo dose model was used. The results obtained show that all secondary barriers were constructed with overestimated thicknesses and that the radiological protection of individuals from the public and occupationally exposed individuals in the areas outside these barriers is guaranteed. The primary barrier was constructed with a thickness 8% smaller than the thickness obtained in the new calculations. In addition to shielding calculations, classification and signaling of adjacent areas were performed, including necessary emergency procedures. The necessary instrumentation for monitoring these areas was also determined. (author)

Selection and characterisation of high ethanol tolerant ...

African Journals Online (AJOL)

15% ethanol tolerance. High level ethanol tolerant Saccharomyces yeast, Orc 6, was investigated for its potential application in ethanologenic fermentations. Data presented in this study revealed that Orc 6 yeast isolate tolerated osmotic stress above 12% (w/v) sorbitol and 15% (w/v) sucrose equivalent of osmotic pressure ...

Cognitive Ability, Principled Reasoning and Political Tolerance

DEFF Research Database (Denmark)

Hebbelstrup Rye Rasmussen, Stig; Nørgaard, Asbjørn Sonne

Individuals are not equally politically tolerant. To explain why, individual differences in emotions and threat have received much scholarly attention in recent years. However, extant research also shows that psychological dispositions, habitual cognitive styles, ideological orientation...... and ‘principled reasoning’ influence political tolerance judgments. The extent to which cognitive ability plays a role has not been entertained even if the capacity to think abstractly, comprehend complex ideas and apply abstract ideas to concrete situations is inherent to both principled tolerance judgment...... and cognitive ability. Cognitive ability, we argue and show, adds to the etiology of political tolerance. In Danish and American samples cognitive ability strongly predicts political tolerance after taking habitual cognitive styles (as measured by personality traits), education, social ideology, and feelings...

Screening for Terminal Drought Tolerance in Iranian and Exotic Safflower Genotypes Using Drought Tolerance and Susceptibility Indices

Directory of Open Access Journals (Sweden)

R. Maleki Nejad

2015-06-01

Full Text Available This research was conducted to evaluate drought tolerance of safflower genotypes (Carthamus tinctorius L. at the research farm of Isfahan University of Technology, Isfahan, Iran during growing season of 2012. One hundred genotypes including 81 foreign genotypes along with 19 Iranian genotypes were evaluated under normal and moisture stress conditions according to a simple lattice design with two replications. Drought tolerance and sensitivity indices including mean productivity (MP, geometric mean productivity (GMP, stress tolerance index (STI, tolerance (TOL and stress susceptibility index (SSI were studied. Results of this study indicated that genotypes were significantly different for grain yield in both moisture conditions. Among all indices, MP, GMP and STI were identified as the best indices that can be used to determine tolerant genotypes. Based on MP, GMP and STI and also principal component analysis PI 369847 (Tajikistan, CART 56 (USA, PI 657820 (Jordan, PI 305527 (Soudan were determined as the most tolerant genotypes and PI 537652 (Mexico, CART 131 (Prague, PI 470942 (Bangladesh, PI 209286 (Romania and CART 32 (German as the most sensitive ones. Results also indicated that the biplot of principal component analysis is a powerful technique to discriminate genotypes based on the measured indices. The superior safflower genotypes can be used in future breeding programs.

Genetic analysis of aluminum tolerance in Brazilian barleys

Directory of Open Access Journals (Sweden)

Minella Euclydes

2002-01-01

Full Text Available Aluminum (Al toxicity is a major factor limiting barley growth in acid soils, and genotypes with adequate level of tolerance are needed for improving barley adaptation in Brazil. To study the inheritance of Al tolerance in Brazilian barleys, cultivars Antarctica 1, BR 1 and FM 404 were crossed to sensitive Kearney and PFC 8026, and intercrossed. Parental, F1, F2 and F6 generations were grown in nutrient solution containing 0.03, 0.05 and 0.07 mM of Al and classified for tolerance by the root tip hematoxylin staining assay. Tolerant by sensitive F2 progenies segregated three tolerant to one sensitive, fitting the 3:1 ratio expected for a single gene. The F6 populations segregated one tolerant to one sensitive also fitting a monogenic ratio. The F2 seedlings from crosses among tolerant genotypes scored the same as the parents. Since the population size used would allow detection of recombination as low as 7%, the complete absence of Al sensitive recombinants suggests that tolerance in these cultivars is most probably, controlled by the same gene. Thus, the potential for improving Al tolerance through recombination of these genotypes is very low and different gene sources should be evaluated.

Predicting Neuroinflammation in Morphine Tolerance for Tolerance Therapy from Immunostaining Images of Rat Spinal Cord.

Directory of Open Access Journals (Sweden)

Shinn-Long Lin

Full Text Available Long-term morphine treatment leads to tolerance which attenuates analgesic effect and hampers clinical utilization. Recent studies have sought to reveal the mechanism of opioid receptors and neuroinflammation by observing morphological changes of cells in the rat spinal cord. This work proposes a high-content screening (HCS based computational method, HCS-Morph, for predicting neuroinflammation in morphine tolerance to facilitate the development of tolerance therapy using immunostaining images for astrocytes, microglia, and neurons in the spinal cord. HCS-Morph first extracts numerous HCS-based features of cellular phenotypes. Next, an inheritable bi-objective genetic algorithm is used to identify a minimal set of features by maximizing the prediction accuracy of neuroinflammation. Finally, a mathematic model using a support vector machine with the identified features is established to predict drug-treated images to assess the effects of tolerance therapy. The dataset consists of 15 saline controls (1 μl/h, 15 morphine-tolerant rats (15 μg/h, and 10 rats receiving a co-infusion of morphine (15 μg/h and gabapentin (15 μg/h, Sigma. The three individual models of astrocytes, microglia, and neurons for predicting neuroinflammation yielded respective Jackknife test accuracies of 96.67%, 90.00%, and 86.67% on the 30 rats, and respective independent test accuracies of 100%, 90%, and 60% on the 10 co-infused rats. The experimental results suggest that neuroinflammation activity expresses more predominantly in astrocytes and microglia than in neuron cells. The set of features for predicting neuroinflammation from images of astrocytes comprises mean cell intensity, total cell area, and second-order geometric moment (relating to cell distribution, relevant to cell communication, cell extension, and cell migration, respectively. The present investigation provides the first evidence for the role of gabapentin in the attenuation of morphine tolerance from

Screening Prosopis (mesquite) for cold tolerance

Energy Technology Data Exchange (ETDEWEB)

Felker, P. (Texas AandI Univ., Kingsville); Clark, P.R.; Nash, P.; Osborn, J.F.; Cannell, G.H.

1982-09-01

Cold tolerance and biomass estimation of Prosopis species were examined under field conditions. Prosopis africana and P. pallida tolerated several minus 1.5/sup 0/C freezes but none survived a minus 5/sup 0/C freeze. P. alba, P. articulata, P. chilensis, P. nigra, and P. tamarugo tolerated several minus 5/sup 0/C freezes but not a 12-hour below 0/sup 0/C freeze. Most North American native species P. glandulosa var. glandulosa, P. glandulosa var. torreyana, and P. velutina tolerated the 12 hour freeze with only moderate damage. In general trees with greater productivity belonged to the most cold sensitive accessions but sufficient variability exists to substantially improve Prosopis biomass production on the coldest areas where it now naturally occurs.

Inheritance of photochemical air pollution tolerance in petunias

Energy Technology Data Exchange (ETDEWEB)

Hanson, G.P.; Addis, D.H.; Thorne, L.

1976-12-01

Seven commercial inbred lines of pink flowered multiflora petunia (Petunia hybrida Vilm.) which differed widely in degrees of tolerance to photochemical oxidants were crossed in all possible combinations to yield a complete diallel cross. Sibling representatives of all 49 possible hybrids were then separately subjected to ozone (O/sub 3/), peroxyacetyl nitrate (PAN), and ambient oxidants at Arcadia, California. The seedlings were scored for tolerance to each pollutant and the inheritance of tolerance to each pollutant was studied. At the ambient levels of photochemical oxidants encountered, PAN more severely injured the petunias than did the O/sub 3/ component. Hybrids tolerant to one oxidant were not necessarily tolerant to the other. The genes which contributed photochemical oxidant tolerance in petunia acted primarily in an additive manner with some indication of partial dominance for tolerance. Gene interaction was evident in the expression of petunia sensitivity to PAN.

Evaluating relative contribution of osmotolerance and tissue tolerance mechanisms toward salinity stress tolerance in three Brassica species.

Science.gov (United States)

Chakraborty, Koushik; Bose, Jayakumar; Shabala, Lana; Eyles, Alieta; Shabala, Sergey

2016-10-01

Three different species of Brassica, with differential salt sensitivity were used to understand physiological mechanisms of salt tolerance operating in these species and to evaluate the relative contribution of different strategies to cope with salt load. Brassica napus was the most tolerant species in terms of the overall performance, with Brassica juncea and Brassica oleracea being much more sensitive to salt stress with no obvious difference between them. While prominent reduction in net CO2 assimilation was observed in both sensitive species, physiological mechanisms beyond this reduction differed strongly. Brassica juncea plants possessed high osmotolerance and were able to maintain high transpiration rate but showed a significant reduction in leaf chlorophyll content and efficiency of leaf photochemistry. On the contrary, B. oleracea plants possessed the highest (among the three species) tissue tolerance but showed a very significant stomatal limitation of photosynthesis. Electrophysiological experiments revealed that the high tissue tolerance in B. oleracea was related to the ability of leaf mesophyll cells to maintain highly negative membrane potential in the presence of high apoplastic Na(+) . In addition to high osmotolerance, the most tolerant B. napus showed also lesser accumulation of toxic Na(+) and Cl(-) in the leaf, possessed moderate tissue tolerance and had a superior K(+) retention ability. Taken together, the results from this study indicate that the three Brassica species employ very different mechanisms to cope with salinity and, despite its overall sensitivity to salinity, B. oleracea could be recommended as a valuable 'donor' of tissue tolerance genes to confer this trait for marker-assisted breeding programs. © 2016 Scandinavian Plant Physiology Society.

Psychological Stability of a Personality and Capability of Tolerant Interaction as Diverse Manifestations of Tolerance

Science.gov (United States)

Belasheva, Irina Valeryevna; Petrova, Nina Fedorovna

2016-01-01

Present article addresses studying tolerance as a factor of personality stability, which manifests on the level of interpersonal relationships and on the level of intra-personal system of stressors resistance. The article includes theoretical analysis of the tolerance construct as an integrative personality formation. It explores the question of…

Comparison of tolerance to soil acidity among crop plants. II. Tolerance to high levels of aluminum and manganese. Comparative plant nutrition

Energy Technology Data Exchange (ETDEWEB)

Tanaka, A; Hayakawa, Y

1975-01-01

Research was conducted by growing various species of plants in solutions containing high concentrations of manganese or aluminum. A comparison was made of the tolerance of these plants to low pH and to the manganese and aluminum. In addition, the element content of the plants was compared. Plants high in calcium were found to have an intermediate tolerance to high concentrations of manganese and aluminum. Gramineae had a high tolerance to these elements and to low pH. They also accumulated high levels of these elements. Legumes had a high tolerance to manganese and aluminum and to low pH. However, they also accumulated high levels of these elements. Legumes had a high tolerance to manganese and aluminum and to low pH. However, they also accumulated high levels of these elements. Cruciferae had a low tolerance to the elements and to low pH. They contained low levels of manganese and aluminum. Chenopodiaceae had a low tolerance to the elements as well as low element contents. However, they were highly tolerant to low pH.

Stress-tolerant mutants induced by heavy-ion beams

International Nuclear Information System (INIS)

Abe, Tomoko; Yoshida, Shigeo; Bae, Chang-Hyu; Ozaki, Takuo

2000-01-01

Comparative study was made on mutagenesis in tobacco embryo induced by exposure to EMS (ethyl methane-sulfonate) ion beams during the fertilization cycle. Tobacco embryo cells immediately after pollination were exposed to heavy ion beam and the sensitivity to the irradiation was assessed in each developmental stage and compared with the effects of EMS, a chemical mutagen. Morphologically abnormality such as chlorophyll deficiency was used as a marker. A total of 17 salt-tolerant plants were selected from 3447 M 1 seeds. A cell line showed salt resistance. The cell growth and chlorophyll content were each two times higher than that of WT cells in the medium containing 154 mM NaCl. Seven strains of M 3 progeny of 17 salt-tolerant plants, showed strong resistance, but no salt tolerant progeny were obtained from Xanthi or Ne-ion irradiation. This shows that the sensitivity of plant embryo to this irradiation technique may vary among species. When exposed to 14 N ion beam for 24-108 hours after pollination, various morphological mutants appeared at 18% in M 1 progeny and herbicide tolerant and salt tolerant mutants were obtained. A strong Co-tolerant strain was obtained in two of 17 salt-tolerant strains and a total of 46 tolerant strains (0.2%) were obtained from 22,272 grains of M 1 seeds. In these tolerant strains, the absorption of Co was slightly decreased, but those of Mg and Mn were increased. Mutants induced with ion-beam irradiation have potential not only for practical use in the breeding of stress-tolerant plants but also for gene analysis that will surely facilitate the molecular understanding of the tolerance mechanisms. (M.N.)

Coordinated Fault Tolerance for High-Performance Computing

Energy Technology Data Exchange (ETDEWEB)

Dongarra, Jack; Bosilca, George; et al.

2013-04-08

Our work to meet our goal of end-to-end fault tolerance has focused on two areas: (1) improving fault tolerance in various software currently available and widely used throughout the HEC domain and (2) using fault information exchange and coordination to achieve holistic, systemwide fault tolerance and understanding how to design and implement interfaces for integrating fault tolerance features for multiple layers of the software stack—from the application, math libraries, and programming language runtime to other common system software such as jobs schedulers, resource managers, and monitoring tools.

An abnormal carbohydrate tolerance in acromegaly

International Nuclear Information System (INIS)

Qi Jinwu

1988-01-01

An abnormal secretion of plasma human growth hormore (hGH) and insulin in 67 acromegalic patients had been previously treated by external pituitary radiation were studied. All subjects, following an overnight fast, a standard 100 g oral glucose tolerance test, were performed and venous blood samples were taken at 0, 30, 60, 120 and 180 min. They were measured for blood glucose, plasma insulin and hGH. The results of this study have shown that, of the 67 subjects, 23 cases had an abnormal glucose tolerance(34.32%). Diabetes was detected in 17 cases (23.37%) and 6 patients had decreased glucose tolerance(8.69%). In all, hGH levels were consistantly above 5 ng/ml and were not suppressed after an oral glucose load. In these patients, however, about one-third had abnormal glucose tolerance. Low plasma insulin response to glucose and that of the releasing were evident in them than the normal glucose tolerance and a healthy control group. In addition, the mechanism of the abnormal secretion of hGH and insulin were disscussed

Software fault tolerance in computer operating systems

Science.gov (United States)

Iyer, Ravishankar K.; Lee, Inhwan

1994-01-01

This chapter provides data and analysis of the dependability and fault tolerance for three operating systems: the Tandem/GUARDIAN fault-tolerant system, the VAX/VMS distributed system, and the IBM/MVS system. Based on measurements from these systems, basic software error characteristics are investigated. Fault tolerance in operating systems resulting from the use of process pairs and recovery routines is evaluated. Two levels of models are developed to analyze error and recovery processes inside an operating system and interactions among multiple instances of an operating system running in a distributed environment. The measurements show that the use of process pairs in Tandem systems, which was originally intended for tolerating hardware faults, allows the system to tolerate about 70% of defects in system software that result in processor failures. The loose coupling between processors which results in the backup execution (the processor state and the sequence of events occurring) being different from the original execution is a major reason for the measured software fault tolerance. The IBM/MVS system fault tolerance almost doubles when recovery routines are provided, in comparison to the case in which no recovery routines are available. However, even when recovery routines are provided, there is almost a 50% chance of system failure when critical system jobs are involved.

Tolerance to environmental desiccation in moss sperm.

Science.gov (United States)

Shortlidge, Erin E; Rosenstiel, Todd N; Eppley, Sarah M

2012-05-01

• Sexual reproduction in mosses requires that sperm be released freely into the environment before finding and fertilizing a receptive female. After release from the male plant, moss sperm may experience a range of abiotic stresses; however, few data are available examining stress tolerance of moss sperm and whether there is genetic variation for stress tolerance in this important life stage. • Here, we investigated the effects of environmental desiccation and recovery on the sperm cells of three moss species (Bryum argenteum, Campylopus introflexus, and Ceratodon purpureus). • We found that a fraction of sperm cells were tolerant to environmental desiccation for extended periods (d) and that tolerance did not vary among species. We found that this tolerance occurs irrespective of ambient dehydration conditions, and that the addition of sucrose during dry-down improved cell recovery. Although we observed no interspecific variation, significant variation among individuals within species in sperm cell tolerance to environmental desiccation was observed, suggesting selection could potentially act on this basic reproductive trait. • The observation of desiccation-tolerant sperm in multiple moss species has important implications for understanding bryophyte reproduction, suggesting the presence of a significant, uncharacterized complexity in the ecology of moss mating systems. © 2012 The Authors. New Phytologist © 2012 New Phytologist Trust.

77 FR 28493 - Propylene Oxide; Tolerance Actions

Science.gov (United States)

2012-05-15

.... SUMMARY: EPA is establishing the tree nut crop group tolerance and separate tolerances on pistachio and...; nut, tree, group 14; and pistachio; and in 40 CFR 180.491(a)(2) tolerances for propylene chlorohydrin at 10.0 ppm on nut, pine; nut, tree, group 14; and pistachio. Also, in accordance with current Agency...

Drought and submergence tolerance in plants

Energy Technology Data Exchange (ETDEWEB)

Du, Hewei; Zhou, Yufan; Oksenberg, Nir; Ronald, Pamela

2017-11-14

The invention provides methods of genetically modified plants to increase tolerance to drought and/or submergence. The invention additionally provides plants having increased drought and/or submergence tolerance engineered using such methods.

A Fault-tolerant RISC Microprocessor for Spacecraft Applications

Science.gov (United States)

Timoc, Constantin; Benz, Harry

1990-01-01

Viewgraphs on a fault-tolerant RISC microprocessor for spacecraft applications are presented. Topics covered include: reduced instruction set computer; fault tolerant registers; fault tolerant ALU; and double rail CMOS logic.

Tolerance Issue in Kazakh Culture

Science.gov (United States)

Aubakirova, Saltanat S.; Ismagambetova, Zukhra N.; Karabayeva, Aliya G.; Rysbekova, Shamshiya S.; Mirzabekova, Alma Sh.

2016-01-01

In this article the authors reveal the basic cultural mechanisms that influence the formation of the tolerance strategy in Kazakh and Kazakhstan society, show its basic directions, as well as its importance for the modern Kazakhstan society and the formation of intercultural communication with foreign countries. Tolerance is a necessary element of…

Tolerance to exercise intensity modulates pleasure when exercising in music: The upsides of acoustic energy for High Tolerant individuals.

Directory of Open Access Journals (Sweden)

Mauraine Carlier

Full Text Available Moderate physical activity can be experienced by some as pleasurable and by others as discouraging. This may be why many people lack sufficient motivation to participate in the recommended 150 minutes of moderately intense exercise per week. In the present study, we assessed how pleasure and enjoyment were modulated differently by one's tolerance to self-paced physical activity. Sixty-three healthy individuals were allocated to three independent experimental conditions: a resting condition (watching TV, a cycling in silence condition, and a cycling in music condition. The tolerance threshold was assessed using the PRETIE-Questionnaire. Physical activity consisted in cycling during 30 minutes, at an intensity perceived as "somewhat difficult" on the Ratings of Perceived Exertion Scale. While controlling for self-reported physical activity level, results revealed that for the same perception of exertion and a similar level of enjoyment, the High Tolerance group produced more power output than the Low Tolerance group. There was a positive effect of music for High Tolerant individuals only, with music inducing greater power output and more pleasure. There was an effect of music on heart rate frequency in the Low Tolerant individuals without benefits in power output or pleasure. Our results suggest that for Low Tolerant individuals, energizing environments can interfere with the promised (positive distracting effects of music. Hence, tolerance to physical effort must be taken into account to conceive training sessions that seek to use distracting methods as means to sustain pleasurable exercising over time.

Tolerance to exercise intensity modulates pleasure when exercising in music: The upsides of acoustic energy for High Tolerant individuals.

Science.gov (United States)

Carlier, Mauraine; Delevoye-Turrell, Yvonne

2017-01-01

Moderate physical activity can be experienced by some as pleasurable and by others as discouraging. This may be why many people lack sufficient motivation to participate in the recommended 150 minutes of moderately intense exercise per week. In the present study, we assessed how pleasure and enjoyment were modulated differently by one's tolerance to self-paced physical activity. Sixty-three healthy individuals were allocated to three independent experimental conditions: a resting condition (watching TV), a cycling in silence condition, and a cycling in music condition. The tolerance threshold was assessed using the PRETIE-Questionnaire. Physical activity consisted in cycling during 30 minutes, at an intensity perceived as "somewhat difficult" on the Ratings of Perceived Exertion Scale. While controlling for self-reported physical activity level, results revealed that for the same perception of exertion and a similar level of enjoyment, the High Tolerance group produced more power output than the Low Tolerance group. There was a positive effect of music for High Tolerant individuals only, with music inducing greater power output and more pleasure. There was an effect of music on heart rate frequency in the Low Tolerant individuals without benefits in power output or pleasure. Our results suggest that for Low Tolerant individuals, energizing environments can interfere with the promised (positive) distracting effects of music. Hence, tolerance to physical effort must be taken into account to conceive training sessions that seek to use distracting methods as means to sustain pleasurable exercising over time.

Effects of Starvation and Thermal Stress on the Thermal Tolerance of Silkworm, Bombyx mori: Existence of Trade-offs and Cross-Tolerances.

Science.gov (United States)

Mir, A H; Qamar, A

2017-09-27

Organisms, in nature, are often subjected to multiple stressors, both biotic and abiotic. Temperature and starvation are among the main stressors experienced by organisms in their developmental cycle and the responses to these stressors may share signaling pathways, which affects the way these responses are manifested. Temperature is a major factor governing the performance of ectothermic organisms in ecosystems worldwide and, therefore, the thermal tolerance is a central issue in the thermobiology of these organisms. Here, we investigated the effects of starvation as well as mild heat and cold shocks on the thermal tolerance of the larvae of silkworm, Bombyx mori (Linnaeus). Starvation acted as a meaningful or positive stressor as it improved cold tolerance, measured as chill coma recovery time (CCRT), but, at the same time, it acted as a negative stressor and impaired the heat tolerance, measured as heat knockdown time (HKT). In the case of heat tolerance, starvation negated the positive effects of both mild cold as well as mild heat shocks and thus indicated the existence of trade-off between these stressors. Both mild heat and cold shocks improved the thermal tolerance, but the effects were more prominent when the indices were measured in response to a stressor of same type, i.e., a mild cold shock improved the cold tolerance more than the heat tolerance and vice versa. This improvement in thermal tolerance by both mild heat as well as cold shocks indicated the possibility of cross-tolerance between these stressors.

Cadmium tolerance, cysteine and thiol peptide levels in wild type and chromium-tolerant strains of Scenedesmus acutus (Chlorophyceae)

Energy Technology Data Exchange (ETDEWEB)

Torricelli, Elena; Gorbi, Gessica; Pawlik-Skowronska, Barbara; Di Toppi, Luigi Sanita; Corradi, Maria Grazia

2004-07-14

Two strains of the unicellular green alga Scenedesmus acutus with different sensitivity to hexavalent chromium were compared for their tolerance of cadmium, by means of growth and recovery tests, and determination of cysteine, reduced glutathione and phytochelatin content, after short-term exposure to various cadmium concentrations (from 1.125 to 27 {mu}M). Growth experiments showed that, after 7-day treatments with cadmium, the chromium-tolerant strain reached a significantly higher cell density and, after 24-h exposure to Cd, was able to resume growth significantly better than the wild type. Constitutive level of cysteine was higher in the chromium-tolerant strain, while glutathione levels were similar in the two strains. The higher content of cysteine and the maintenance of both reduced glutathione and phytochelatin high levels in the presence of cadmium, support the higher cadmium co-tolerance of the chromium-tolerant strain in comparison with the wild type one.

Cadmium tolerance, cysteine and thiol peptide levels in wild type and chromium-tolerant strains of Scenedesmus acutus (Chlorophyceae)

International Nuclear Information System (INIS)

Torricelli, Elena; Gorbi, Gessica; Pawlik-Skowronska, Barbara; Di Toppi, Luigi Sanita; Corradi, Maria Grazia

2004-01-01

Two strains of the unicellular green alga Scenedesmus acutus with different sensitivity to hexavalent chromium were compared for their tolerance of cadmium, by means of growth and recovery tests, and determination of cysteine, reduced glutathione and phytochelatin content, after short-term exposure to various cadmium concentrations (from 1.125 to 27 μM). Growth experiments showed that, after 7-day treatments with cadmium, the chromium-tolerant strain reached a significantly higher cell density and, after 24-h exposure to Cd, was able to resume growth significantly better than the wild type. Constitutive level of cysteine was higher in the chromium-tolerant strain, while glutathione levels were similar in the two strains. The higher content of cysteine and the maintenance of both reduced glutathione and phytochelatin high levels in the presence of cadmium, support the higher cadmium co-tolerance of the chromium-tolerant strain in comparison with the wild type one

Deconstructing tolerance with clobazam

Science.gov (United States)

Wechsler, Robert T.; Sankar, Raman; Montouris, Georgia D.; White, H. Steve; Cloyd, James C.; Kane, Mary Clare; Peng, Guangbin; Tworek, David M.; Shen, Vivienne; Isojarvi, Jouko

2016-01-01

Objective: To evaluate potential development of tolerance to adjunctive clobazam in patients with Lennox-Gastaut syndrome. Methods: Eligible patients enrolled in open-label extension study OV-1004, which continued until clobazam was commercially available in the United States or for a maximum of 2 years outside the United States. Enrolled patients started at 0.5 mg·kg−1·d−1 clobazam, not to exceed 40 mg/d. After 48 hours, dosages could be adjusted up to 2.0 mg·kg−1·d−1 (maximum 80 mg/d) on the basis of efficacy and tolerability. Post hoc analyses evaluated mean dosages and drop-seizure rates for the first 2 years of the open-label extension based on responder categories and baseline seizure quartiles in OV-1012. Individual patient listings were reviewed for dosage increases ≥40% and increasing seizure rates. Results: Data from 200 patients were included. For patients free of drop seizures, there was no notable change in dosage over 24 months. For responder groups still exhibiting drop seizures, dosages were increased. Weekly drop-seizure rates for 100% and ≥75% responders demonstrated a consistent response over time. Few patients had a dosage increase ≥40% associated with an increase in seizure rates. Conclusions: Two-year findings suggest that the majority of patients do not develop tolerance to the antiseizure actions of clobazam. Observed dosage increases may reflect best efforts to achieve seizure freedom. It is possible that the clinical development of tolerance to clobazam has been overstated. ClinicalTrials.gov identifier: NCT00518713 and NCT01160770. Classification of evidence: This study provides Class III evidence that the majority of patients do not develop tolerance to clobazam over 2 years of treatment. PMID:27683846

Oral Tolerance: Therapeutic Implications for Autoimmune Diseases

Directory of Open Access Journals (Sweden)

Ana M. C. Faria

2006-01-01

Full Text Available Oral tolerance is classically defined as the suppression of immune responses to antigens (Ag that have been administered previously by the oral route. Multiple mechanisms of tolerance are induced by oral Ag. Low doses favor active suppression, whereas higher doses favor clonal anergy/deletion. Oral Ag induces Th2 (IL-4/IL-10 and Th3 (TGF-β regulatory T cells (Tregs plus CD4+CD25+ regulatory cells and LAP+T cells. Induction of oral tolerance is enhanced by IL-4, IL-10, anti-IL-12, TGF-β, cholera toxin B subunit (CTB, Flt-3 ligand, anti-CD40 ligand and continuous feeding of Ag. In addition to oral tolerance, nasal tolerance has also been shown to be effective in suppressing inflammatory conditions with the advantage of a lower dose requirement. Oral and nasal tolerance suppress several animal models of autoimmune diseases including experimental allergic encephalomyelitis (EAE, uveitis, thyroiditis, myasthenia, arthritis and diabetes in the nonobese diabetic (NOD mouse, plus non-autoimmune diseases such as asthma, atherosclerosis, colitis and stroke. Oral tolerance has been tested in human autoimmune diseases including MS, arthritis, uveitis and diabetes and in allergy, contact sensitivity to DNCB, nickel allergy. Positive results have been observed in phase II trials and new trials for arthritis, MS and diabetes are underway. Mucosal tolerance is an attractive approach for treatment of autoimmune and inflammatory diseases because of lack of toxicity, ease of administration over time and Ag-specific mechanism of action. The successful application of oral tolerance for the treatment of human diseases will depend on dose, developing immune markers to assess immunologic effects, route (nasal versus oral, formulation, mucosal adjuvants, combination therapy and early therapy.

Zero Tolerance: Advantages and Disadvantages. Research Brief

Science.gov (United States)

Walker, Karen

2009-01-01

What are the positives and negatives of zero tolerance? What should be considered when examining a school's program? Although there are no definitive definitions of zero tolerance, two commonly used ones are as follows: "Zero tolerance means that a school will automatically and severely punish a student for a variety of infractions" (American Bar…

Sugars and Desiccation Tolerance in Seeds 1

Science.gov (United States)

Koster, Karen L.; Leopold, A. Carl

1988-01-01

Soluble sugars have been shown to protect liposomes and lobster microsomes from desiccation damage, and a protective role has been proposed for them in several anhydrous systems. We have studied the relationship between soluble sugar content and the loss of desiccation tolerance in the axes of germinating soybean (Glycine max L. Merr. cv Williams), pea (Pisum sativum L. cv Alaska), and corn (Zea mays L. cv Merit) axes. The loss of desiccation tolerance during imbibition was monitored by following the ability of seeds to germinate after desiccation following various periods of preimbibition and by following the rates of electrolyte leakage from dried, then rehydrated axes. Finally, we analyzed the soluble sugar contents of the axes throughout the transition from desiccation tolerance to intolerance. These analyses show that sucrose and larger oligosaccharides were consistently present during the tolerant stage, and that desiccation tolerance disappeared as the oligosaccharides were lost. The results support the idea that sucrose may serve as the principal agent of desiccation tolerance in these seeds, with the larger oligosaccharides serving to keep the sucrose from crystallizing. PMID:16666392

Definition of tolerable soil erosion values

Directory of Open Access Journals (Sweden)

G. Sparovek

1997-09-01

Full Text Available Although the criteria for defining erosion tolerance are well established, the limits generally used are not consistent with natural, economical and technological conditions. Rates greater than soil formation can be accepted only until a minimum of soil depth is reached, provided that they are not associated with environmental hazard or productivity losses. A sequence of equations is presented to calculate erosion tolerance rates through time. The selection of equation parameters permits the definition of erosion tolerance rates in agreement with environmental, social and technical needs. The soil depth change that is related to irreversible soil degradation can be calculated. The definition of soil erosion tolerance according to these equations can be used as a guideline for sustainable land use planning and is compatible with expert systems.

Defining Resistance and Tolerance to Cancer

Directory of Open Access Journals (Sweden)

Adler R. Dillman

2015-11-01

Full Text Available There are two ways to maintain fitness in the face of infection: resistance is a host’s ability to reduce microbe load and disease tolerance is the ability of the host to endure the negative health effects of infection. Resistance and disease tolerance should be applicable to any insult to the host and have been explored in depth with regards to infection but have not been examined in the context of cancer. Here, we establish a framework for measuring and separating resistance and disease tolerance to cancer in Drosophila melanogaster. We plot a disease tolerance curve to cancer in wild-type flies and then compare this to natural variants, identifying a line with reduced cancer resistance. Quantitation of these two traits opens an additional dimension for analysis of cancer biology.

Stress-tolerant mutants induced by heavy-ion beams

Energy Technology Data Exchange (ETDEWEB)

Abe, Tomoko; Yoshida, Shigeo [Institute of Physical and Chemical Research, Wako, Saitama (Japan); Bae, Chang-Hyu [Sunchon National University, Sunchon (Korea); Ozaki, Takuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Wang, Jing Ming [Akita Prefectural Univ. (Japan)

2000-07-01

Comparative study was made on mutagenesis in tobacco embryo induced by exposure to EMS (ethyl methane-sulfonate) ion beams during the fertilization cycle. Tobacco embryo cells immediately after pollination were exposed to heavy ion beam and the sensitivity to the irradiation was assessed in each developmental stage and compared with the effects of EMS, a chemical mutagen. Morphologically abnormality such as chlorophyll deficiency was used as a marker. A total of 17 salt-tolerant plants were selected from 3447 M{sub 1} seeds. A cell line showed salt resistance. The cell growth and chlorophyll content were each two times higher than that of WT cells in the medium containing 154 mM NaCl. Seven strains of M{sub 3} progeny of 17 salt-tolerant plants, showed strong resistance, but no salt tolerant progeny were obtained from Xanthi or Ne-ion irradiation. This shows that the sensitivity of plant embryo to this irradiation technique may vary among species. When exposed to {sup 14}N ion beam for 24-108 hours after pollination, various morphological mutants appeared at 18% in M{sub 1} progeny and herbicide tolerant and salt tolerant mutants were obtained. A strong Co-tolerant strain was obtained in two of 17 salt-tolerant strains and a total of 46 tolerant strains (0.2%) were obtained from 22,272 grains of M{sub 1} seeds. In these tolerant strains, the absorption of Co was slightly decreased, but those of Mg and Mn were increased. Mutants induced with ion-beam irradiation have potential not only for practical use in the breeding of stress-tolerant plants but also for gene analysis that will surely facilitate the molecular understanding of the tolerance mechanisms. (M.N.)

Drought Tolerance in Modern and Wild Wheat

Science.gov (United States)

Budak, Hikmet; Kantar, Melda; Yucebilgili Kurtoglu, Kuaybe

2013-01-01

The genus Triticum includes bread (Triticum aestivum) and durum wheat (Triticum durum) and constitutes a major source for human food consumption. Drought is currently the leading threat on world's food supply, limiting crop yield, and is complicated since drought tolerance is a quantitative trait with a complex phenotype affected by the plant's developmental stage. Drought tolerance is crucial to stabilize and increase food production since domestication has limited the genetic diversity of crops including wild wheat, leading to cultivated species, adapted to artificial environments, and lost tolerance to drought stress. Improvement for drought tolerance can be achieved by the introduction of drought-grelated genes and QTLs to modern wheat cultivars. Therefore, identification of candidate molecules or loci involved in drought tolerance is necessary, which is undertaken by “omics” studies and QTL mapping. In this sense, wild counterparts of modern varieties, specifically wild emmer wheat (T. dicoccoides), which are highly tolerant to drought, hold a great potential. Prior to their introgression to modern wheat cultivars, drought related candidate genes are first characterized at the molecular level, and their function is confirmed via transgenic studies. After integration of the tolerance loci, specific environment targeted field trials are performed coupled with extensive analysis of morphological and physiological characteristics of developed cultivars, to assess their performance under drought conditions and their possible contributions to yield in certain regions. This paper focuses on recent advances on drought related gene/QTL identification, studies on drought related molecular pathways, and current efforts on improvement of wheat cultivars for drought tolerance. PMID:23766697

Drought Tolerance in Modern and Wild Wheat

Directory of Open Access Journals (Sweden)

Hikmet Budak

2013-01-01

Full Text Available The genus Triticum includes bread (Triticum aestivum and durum wheat (Triticum durum and constitutes a major source for human food consumption. Drought is currently the leading threat on world's food supply, limiting crop yield, and is complicated since drought tolerance is a quantitative trait with a complex phenotype affected by the plant's developmental stage. Drought tolerance is crucial to stabilize and increase food production since domestication has limited the genetic diversity of crops including wild wheat, leading to cultivated species, adapted to artificial environments, and lost tolerance to drought stress. Improvement for drought tolerance can be achieved by the introduction of drought-grelated genes and QTLs to modern wheat cultivars. Therefore, identification of candidate molecules or loci involved in drought tolerance is necessary, which is undertaken by “omics” studies and QTL mapping. In this sense, wild counterparts of modern varieties, specifically wild emmer wheat (T. dicoccoides, which are highly tolerant to drought, hold a great potential. Prior to their introgression to modern wheat cultivars, drought related candidate genes are first characterized at the molecular level, and their function is confirmed via transgenic studies. After integration of the tolerance loci, specific environment targeted field trials are performed coupled with extensive analysis of morphological and physiological characteristics of developed cultivars, to assess their performance under drought conditions and their possible contributions to yield in certain regions. This paper focuses on recent advances on drought related gene/QTL identification, studies on drought related molecular pathways, and current efforts on improvement of wheat cultivars for drought tolerance.

Furfural-tolerant Zymomonas mobilis derived from error-prone PCR-based whole genome shuffling and their tolerant mechanism.

Science.gov (United States)

Huang, Suzhen; Xue, Tingli; Wang, Zhiquan; Ma, Yuanyuan; He, Xueting; Hong, Jiefang; Zou, Shaolan; Song, Hao; Zhang, Minhua

2018-04-01

Furfural-tolerant strain is essential for the fermentative production of biofuels or chemicals from lignocellulosic biomass. In this study, Zymomonas mobilis CP4 was for the first time subjected to error-prone PCR-based whole genome shuffling, and the resulting mutants F211 and F27 that could tolerate 3 g/L furfural were obtained. The mutant F211 under various furfural stress conditions could rapidly grow when the furfural concentration reduced to 1 g/L. Meanwhile, the two mutants also showed higher tolerance to high concentration of glucose than the control strain CP4. Genome resequencing revealed that the F211 and F27 had 12 and 13 single-nucleotide polymorphisms. The activity assay demonstrated that the activity of NADH-dependent furfural reductase in mutant F211 and CP4 was all increased under furfural stress, and the activity peaked earlier in mutant than in control. Also, furfural level in the culture of F211 was also more rapidly decreased. These indicate that the increase in furfural tolerance of the mutants may be resulted from the enhanced NADH-dependent furfural reductase activity during early log phase, which could lead to an accelerated furfural detoxification process in mutants. In all, we obtained Z. mobilis mutants with enhanced furfural and high concentration of glucose tolerance, and provided valuable clues for the mechanism of furfural tolerance and strain development.

Towards Tolerance

NARCIS (Netherlands)

Lisette Kuyper; Jurjen Iedema; Saskia Keuzenkamp

2013-01-01

Across Europe, public attitudes towards lesbian, gay and bisexual (LGB) individuals range from broad tolerance to widespread rejection. Attitudes towards homosexuality are more than mere individual opinions, but form part of the social and political structures which foster or hinder the equality

The Possibility of Horizontal Tolerance. A Response to "Teaching for Toleration in Pluralist Liberal Democracies"

Science.gov (United States)

Tillson, John B.

2017-01-01

In response to van Waarden's paper, which denied the possibility of horizontal tolerance between citizens, I argue that tolerance is both possible and often desirable between citizens. I also argue that a more substantive set of constraints are required for justice to be served than mere deference to whatever existing constitutions and laws happen…

Escaping the tolerance trap

International Nuclear Information System (INIS)

Hammoudeh, S.; Madan, V.

1994-01-01

In order to examine the implications of the weakening of OPEC's responsiveness in adjusting its production levels, this paper explicitly incorporates rigidity in the quantity adjustment mechanism, thereby extending previous research which assumed smooth quantity adjustments. The rigidity is manifested in a tolerance range for the discrepancy between the declared target price and that of the market. This environment gives rise to a 'tolerance trap' which impedes the convergence process and inevitably brings the market to a standstill before its reaches the targeted price and revenue objectives. OPEC's reaction to the standstill has important implications for the achievement of the target-based equilibrium and for the potential collapse of the market price. This paper examines OPEC's policy options in the tolerance trap and reveals that the optional policy in order to break this impasse and move closer to the equilibrium point is gradually to reduce output and not to flood the market. (Author)

Reirradiation tolerance of the rat heart

International Nuclear Information System (INIS)

Wondergem, Jan; Ravels, Frank J.M. van; Reijnart, Ivonne W.C.; Strootman, Erwin G.

1996-01-01

Purpose: To investigate the influence of reirradiation on the tolerance of the heart after a previous irradiation treatment. Methods and Materials: Female Wistar rats were locally irradiated to the thorax. Development of cardiac function loss was studied with the ex vivo working rat heart preparation. To compare the retreatment experiments, initial, and reirradiation doses were expressed as the percentage of the extrapolated tolerance dose (ETD). Results: Local heart irradiation with a single dose led to a dose-dependent and progressive decrease in cardiac function. The progressive nature of irradiation-induced heart disease is shown to affect the outcome of the retreatment, depending on both the time interval between subsequent doses and the size of the initial dose. The present data demonstrate that hearts are capable of repairing a large part of the initial dose of 10 Gy within the first 24 h. However, once biological damage as a result of the first treatment is fixed, the heart does not show any long-term recovery. At intervals up to 6 months between an initial treatment with 10 Gy and subsequent reirradiation, the reirradiation tolerance dose slightly decreased from 74% of the ETD ref (at 24-h interval) to 68% of the ETD ref (at 6-month interval). Between 6 and 9 months, reirradiation tolerance dose dropped more even to 43% of the ETD ref . Treatment of the heart with an initial dose of 17.5 Gy, instead of 10 Gy, 6 months prior to reirradiation, also led to a further decrease of the reirradiation tolerance dose ( ref ). Conclusions: The outcome of the present study shows a decreased tolerance of the heart to reirradiation at long time intervals (interval > 6 months). This has clinical implications for the estimation of reirradiation tolerance in patients whose mediastinum has to be reirradiated a long time after a first irradiation course

A comparison of the development of tolerance to ethanol and cross-tolerance to nicotine after chronic ethanol treatment in long- and short-sleep mice.

Science.gov (United States)

de Fiebre, C M; Collins, A C

1993-09-01

Previous studies have shown that inbred mouse strains differ in the development of tolerance to both nicotine and ethanol, indicating that genetic factors regulate tolerance development. Those mouse strains that are most sensitive to an acute challenge dose of either drug develop the most tolerance to that drug. The ethanol-sensitive long-sleep (LS) mice are more sensitive to several behavioral and physiological effects of nicotine than are the ethanol-resistant short-sleep (SS) mice. The experiments reported here assessed whether the LS and SS mice develop tolerance to ethanol after chronic treatment with ethanol-containing liquid diets and whether cross-tolerance to nicotine also developed. Tolerance and cross-tolerance were measured by assessing the effects of acute challenge doses of drug on Y-maze crossing and rearing activities, heart rate and body temperature. The LS mice developed tolerance to ethanol's effects on three of the four measures and were cross-tolerant to nicotine on all of the measures. In contrast, the SS mice developed tolerance to ethanol for only two of the measures, but failed to develop cross-tolerance to any action of nicotine. These findings support the hypothesis that ethanol and nicotine share sites of action and that common genes regulate responses to these two drugs. Evidence suggests that tolerance to nicotine may be related to an up-regulation of brain nicotinic receptors, at least in some inbred mouse strains, but chronic ethanol treatment did not reproducibly change either [3H]nicotine or alpha-[125I]bungarotoxin binding. Therefore, other mechanisms must underlie the tolerance and cross-tolerance that was seen.

Urban physiology: city ants possess high heat tolerance.

Directory of Open Access Journals (Sweden)

Michael J Angilletta

Full Text Available Urbanization has caused regional increases in temperature that exceed those measured on a global scale, leading to urban heat islands as much as 12 degrees C hotter than their surroundings. Optimality models predict ectotherms in urban areas should tolerate heat better and cold worse than ectotherms in rural areas. We tested these predications by measuring heat and cold tolerances of leaf-cutter ants from South America's largest city (São Paulo, Brazil. Specifically, we compared thermal tolerances of ants from inside and outside of the city. Knock-down resistance and chill-coma recovery were used as indicators of heat and cold tolerances, respectively. Ants from within the city took 20% longer to lose mobility at 42 degrees C than ants from outside the city. Interestingly, greater heat tolerance came at no obvious expense of cold tolerance; hence, our observations only partially support current theory. Our results indicate that thermal tolerances of some organisms can respond to rapid changes in climate. Predictive models should account for acclimatory and evolutionary responses during climate change.

Oral tolerance induction with altered forms of ovalbumin

Directory of Open Access Journals (Sweden)

Stransky B.

1998-01-01

Full Text Available As a T cell-dependent phenomenon, oral tolerance is not expected to depend necessarily on native configuration of antigens. We investigated the induction of oral tolerance with modified ovalbumin (Ova. Oral administration of heat-denatured (HD-Ova and cyanogen bromide-degraded ovalbumin was less effective than native Ova in inducing oral tolerance in B6D2F1 mice. HD-Ova was effective in suppressing delayed-type hypersensitivity (DTH reactions but did not suppress specific antibody formation. Injection of Ova directly into the stomach, but not into the ileum or cecum, suppressed subsequent immunization to DTH reactions. Gavage with protease inhibitors (aprotinin or ovomucoid before gavage with Ova was ineffective in blocking tolerance induction. Treatment with hydroxyurea to destroy cycling cells 24 h before gavage with Ova blocked oral tolerance induction and also the possibility to passively transfer tolerance to naive recipients with the serum of mice gavaged with Ova 1 h before. The implications of these findings about oral tolerance induction are discussed

The immediate effects of a single bout of aerobic exercise on oral glucose tolerance across the glucose tolerance continuum

DEFF Research Database (Denmark)

Knudsen, Sine H; Karstoft, Kristian; Pedersen, Bente K

2014-01-01

We investigated glucose tolerance and postprandial glucose fluxes immediately after a single bout of aerobic exercise in subjects representing the entire glucose tolerance continuum. Twenty-four men with normal glucose tolerance (NGT), impaired glucose tolerance (IGT), or type 2 diabetes (T2D; age......: 56 ± 1 years; body mass index: 27.8 ± 0.7 kg/m(2), P > 0.05) underwent a 180-min oral glucose tolerance test (OGTT) combined with constant intravenous infusion of [6,6-(2)H2]glucose and ingestion of [U-(13)C]glucose, following 1 h of exercise (50% of peak aerobic power) or rest. In both trials......OGTT, and Rd (all P value in NGT subjects when compared to IGT and T2D subjects. Accordingly, following exercise, the plasma glucose concentration during the OGTT was increased in NGT subjects (P

Tolerance Levels of Roadside Trees to Air Pollutants Based on Relative Growth Rate and Air Pollution Tolerance Index

Directory of Open Access Journals (Sweden)

SULISTIJORINI

2008-09-01

Full Text Available Motor vehicles release carbon monoxide, nitrogen dioxide, sulphur dioxide, and particulate matters to the air as pollutants. Vegetation can absorb these pollutants through gas exchange processes. The objective of this study was to examine the combination of the relative growth rate (RGR and physiological responses in determining tolerance levels of plant species to air pollutants. Physiological responses were calculated as air pollution tolerance index (APTI. Eight roadside tree species were placed at polluted (Jagorawi highway and unpolluted (Sindangbarang field area. Growth and physiological parameters of the trees were recorded, including plant height, leaf area, total ascorbate, total chlorophyll, leaf-extract pH, and relative water content. Scoring criteria for the combination of RGR and APTI method was given based on means of the two areas based on two-sample t test. Based on the total score of RGR and APTI, Lagerstroemia speciosa was categorized as a tolerant species; and Pterocarpus indicus, Delonix regia, Swietenia macrophylla were categorized as moderately tolerant species. Gmelina arborea, Cinnamomum burmanii, and Mimusops elengi were categorized as intermediate tolerant species. Lagerstroemia speciosa could be potentially used as roadside tree. The combination of RGR and APTI value was better to determinate tolerance level of plant to air pollutant than merely APTI method.

Aluminum-Tolerant Pisolithus Ectomycorrhizas Confer Increased Growth, Mineral Nutrition, and Metal Tolerance to Eucalyptus in Acidic Mine Spoil

Directory of Open Access Journals (Sweden)

Louise Egerton-Warburton

2015-01-01

Full Text Available Ectomycorrhizal fungi (ECM may increase the tolerance of their host plants to Al toxicity by immobilizing Al in fungal tissues and/or improving plant mineral nutrition. Although these benefits have been demonstrated in in vitro (pure culture or short-term nutrient solution (hydroponic experiments, fewer studies have examined these benefits in the field. This study examined the growth, mineral nutrition, and Al levels in two Eucalyptus species inoculated with three Pisolithus ecotypes that varied in Al tolerance (in vitro and grown in mine spoil in the greenhouse and field. All three ecotypes of Pisolithus improved Eucalyptus growth and increased host plant tolerance to Al in comparison to noninoculated plants. However, large variations in plant growth and mineral nutrition were detected among the Pisolithus-inoculated plants; these differences were largely explained by the functional properties of the Pisolithus inoculum. Seedlings inoculated with the most Al-tolerant Pisolithus inoculum showed significantly higher levels of N, P, Ca, Mg, and K and lower levels of Al than seedlings inoculated with Al-sensitive ecotypes of Pisolithus. These findings indicate an agreement between the fungal tolerance to Al in vitro and performance in symbiosis, indicating that both ECM-mediated mineral nutrient acquisition and Al accumulation are important in increasing the host plant Al tolerance.

The impact of the reassessment of A-bomb dosimetry

International Nuclear Information System (INIS)

Kopecky, K.J.; Preston, D.L.

1988-07-01

This report examines the anticipated impact of the adoption by RERF of a new atomic bomb radiation dosimetry system to replace the revised tentative 1965 dosimetry system (T65DR). The current binational effort to reassess A-bomb dosimetry will eventually produce information about air doses and attenuation due to shielding by structures and body tissue. A method for computing individual survivors' total body surface exposure doses and organ doses from such data was developed, and a set of interim 1985 dosimetry (I85D) estimates was computed by this method using the data available to RERF in late 1984. Estimates of I85D total body surface exposure doses could be computed for 64,804 of 91,231 exposed survivors with T65DR dose estimates; following present plans, revised dose estimates may become available for an additional group of 10,000 to 12,000 exposed survivors. Mortality from leukemia and from all cancers except leukemia was examined in relation to I85D total body surface exposure doses (gamma plus neutron); parallel analyses using T65DR exposure doses were also conducted for the same set of survivors. Overall estimates of radiogenic excess risk based on I85D total body surface doses were about 50 % greater than those based on T65DR doses. Nonsignificant differences of only 3 % or less between the radiogenic excess risks for Hiroshima and Nagasaki survivors were observed in relation to I85D doses. Modification of the radiation dose response by sex, age at the time of the bombing, or time since exposure was qualitatively similar for I85D and T65DR. For both leukemia and nonleukemic cancer mortality, the radiogenic excess risk was found to increase as a linear function of I85D total body surface dose; significantly poorer fits were obtained with pure quadratic dose-response functions, while linear-quadratic dose responses did not provide significantly better fits. (J.P.N.)

Salt tolerance in wheat - an overview. (abstract)

International Nuclear Information System (INIS)

Ashraf, M.

2005-01-01

Considerable efforts have been made during the past few years to overcome the problem of salinity through the development of salt tolerant lines of important crop species using screening, breeding and molecular biology techniques. In view of considerable importance of spring wheat as a major staple food crop of many countries, plant scientists have directed there attention to identify and develop salt tolerant genotypes that can be of direct use on salt-affected soils. Although considerable progress in understanding individual phenomenon and genes involved in plant response to salinity stress has been made over the past few years, underlying physiological mechanisms producing salt tolerant plants is still unclear. It has been suggested that salt tolerance of plants could be improved by defining genes or characters. Twenty years ago, it was suggested that genes located on the D genome of bread wheat confer salinity tolerance to hexaploid wheat by reducing Na/sup +/ accumulation in the leaf tissue and increasing discrimination in favour of K/sup +/. However, recently, low Na/sup +/ accumulation and high K/sup +/Na/sup +/ discrimination, of similar magnitude to bread wheat, in several selections of durum wheat has been observed, supporting the notion that salt tolerance is controlled by multiple genes, which are distributed throughout the entire set of chromosomes. In addition, various physiological selection criteria such as compatible osmolytes (glycinebetaine, proline, trehalose, mannitol etc.), antioxidants, carbon discrimination, high K/sup +//Na/sup +/ ratio etc. have been discussed. Although tolerance to salinity is known to have a multigenic inheritance, mediated by a large number of genes, knowledge of heritability and the genetic mode of salinity tolerance is still lacking because few studies have yet been conducted in these areas. Indeed, genetic information is lagging behind the physiological information. Modern methods such as recombinant DNA technology

An architecture for fault tolerant controllers

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Stoustrup, Jakob

2005-01-01

degradation in the sense of guaranteed degraded performance. A number of fault diagnosis problems, fault tolerant control problems, and feedback control with fault rejection problems are formulated/considered, mainly from a fault modeling point of view. The method is illustrated on a servo example including......A general architecture for fault tolerant control is proposed. The architecture is based on the (primary) YJBK parameterization of all stabilizing compensators and uses the dual YJBK parameterization to quantify the performance of the fault tolerant system. The approach suggested can be applied...

Inequality, Tolerance, and Growth

DEFF Research Database (Denmark)

Bjørnskov, Christian

This paper argues for the importance of individuals' tolerance of inequality for economic growth. By using the political ideology of governments as a measure of revealed tolerance of inequality, the paper shows that controlling for ideology improves the accuracy with which the effects of inequality...... are measured. Results show that inequality reduces growth but more so in societies where people perceive it as being relatively unfair. Further results indicate that legal quality and social trust are likely transmission channels for the effects of inequality....

Inequality, Tolerance, and Growth

DEFF Research Database (Denmark)

Bjørnskov, Christian

2004-01-01

This paper argues for the importance of individuals' tolerance of inequality for economic growth. By using the political ideology of governments as a measure of revealed tolerance of inequality, the paper shows that controlling for ideology improves the accuracy with which the effects of inequality...... are measured. Results show that inequality reduces growth but more so in societies where people perceive it as being relatively unfair. Further results indicate that legal quality and social trust are likely transmission channels for the effects of inequality....

Reassessing the stable water isotope record in understanding past climate

International Nuclear Information System (INIS)

Noone, D.; Simmonds, I.

1999-01-01

Full text: The impact of atmospheric circulation on the stable water isotope record has been examined using an atmospheric general circulation model to reassess the validity of using isotopes to reconstruct Earth's climate history. Global temperature changes are classically estimated from the variations in (polar) isotopic values assuming a simple linear relationship. Such a relationship can be justified from first order theoretical considerations given that the isotopic fractionation at the deposition (ice core) site is temperature dependent. However, it is found that the history of a given air mass is more important that local processes because of the net effect of condensation events active along the transport pathway from the source region. Modulations in the hemispheric flow are seen to be crucial to Antarctic precipitation and the isotopic signal. Similarly, both transient and stationary disturbances influence the pathways of the air masses associated with Antarctic precipitation. During different climate regimes, such as that of the Last Glacial Maximum, the properties of these types of disturbances may not be assumed to be the same. As such, we may not assume that the condensation histories are the same as under different climate conditions. Therefore, the veracity of the linear climate reconstructions becomes questionable. Notwithstanding this result, the types of changes to the circulation regime that are expected generally correspond to changes in the global temperature. This fortunate result does not disallow the use of regressional reconstruction, however, the uncertainties associated with these circulation changes are of the same magnitude as the differences suggested by conventional linear regression in climate reconstruction. This indicates that interpretation of ice core data must be accompanied by detailed examination of the atmospheric processes and quantification of the impacts of their changes. Copyright (1999) Geological Society of Australia

GIS/RS-based Rapid Reassessment for Slope Land Capability Classification

Science.gov (United States)

Chang, T. Y.; Chompuchan, C.

2014-12-01

Farmland resources in Taiwan are limited because about 73% is mountainous and slope land. Moreover, the rapid urbanization and dense population resulted in the highly developed flat area. Therefore, the utilization of slope land for agriculture is more needed. In 1976, "Slope Land Conservation and Utilization Act" was promulgated to regulate the slope land utilization. Consequently, slope land capability was categorized into Class I-IV according to 4 criteria, i.e., average land slope, effective soil depth, degree of soil erosion, and parent rock. The slope land capability Class I-VI are suitable for cultivation and pasture. Whereas, Class V should be used for forestry purpose and Class VI should be the conservation land which requires intensive conservation practices. The field survey was conducted to categorize each land unit as the classification scheme. The landowners may not allow to overuse land capability limitation. In the last decade, typhoons and landslides frequently devastated in Taiwan. The rapid post-disaster reassessment of the slope land capability classification is necessary. However, the large-scale disaster on slope land is the constraint of field investigation. This study focused on using satellite remote sensing and GIS as the rapid re-evaluation method. Chenyulan watershed in Nantou County, Taiwan was selected to be a case study area. Grid-based slope derivation, topographic wetness index (TWI) and USLE soil loss calculation were used to classify slope land capability. The results showed that GIS-based classification give an overall accuracy of 68.32%. In addition, the post-disaster areas of Typhoon Morakot in 2009, which interpreted by SPOT satellite imageries, were suggested to classify as the conservation lands. These tools perform better in the large coverage post-disaster update for slope land capability classification and reduce time-consuming, manpower and material resources to the field investigation.

Energy-efficient fault-tolerant systems

CERN Document Server

Mathew, Jimson; Pradhan, Dhiraj K

2013-01-01

This book describes the state-of-the-art in energy efficient, fault-tolerant embedded systems. It covers the entire product lifecycle of electronic systems design, analysis and testing and includes discussion of both circuit and system-level approaches. Readers will be enabled to meet the conflicting design objectives of energy efficiency and fault-tolerance for reliability, given the up-to-date techniques presented.

Engineering antigen-specific immunological tolerance.

Energy Technology Data Exchange (ETDEWEB)

Kontos, Stephan; Grimm, Alizee J.; Hubbell, Jeffrey A.

2015-05-01

Unwanted immunity develops in response to many protein drugs, in autoimmunity, in allergy, and in transplantation. Approaches to induce immunological tolerance aim to either prevent these responses or reverse them after they have already taken place. We present here recent developments in approaches, based on engineered peptides, proteins and biomaterials, that harness mechanisms of peripheral tolerance both prophylactically and therapeutically to induce antigenspecific immunological tolerance. These mechanisms are based on responses of B and T lymphocytes to other cells in their immune environment that result in cellular deletion or ignorance to particular antigens, or in development of active immune regulatory responses. Several of these approaches are moving toward clinical development, and some are already in early stages of clinical testing.

Effectiveness of halo-tolerant, auxin producing Pseudomonas and Rhizobium strains to improve osmotic stress tolerance in mung bean (Vigna radiata L.

Directory of Open Access Journals (Sweden)

Maqshoof Ahmad

2013-12-01

Full Text Available Halo-tolerant, auxin producing bacteria could be used to induce salt tolerance in plants. A number of Rhizobium and auxin producing rhizobacterial strains were assessed for their ability to tolerate salt stress by conducting osmoadaptation assay. The selected strains were further screened for their ability to induce osmotic stress tolerance in mung bean seedlings under salt-stressed axenic conditions in growth pouch/jar trials. Three most effective strains of Rhizobium and Pseudomonas containing ACC-deaminase were evaluated in combination, for their ability to induce osmotic stress tolerance in mung bean at original, 4, and 6 dS m-1 under axenic conditions. Results showed that sole inoculation of Rhizobium and Pseudomonas strains improved the total dry matter up to 1.4, and 1.9 fold, respectively, while the increase in salt tolerance index was improved up to 1.3 and 2.0 fold by the Rhizobium and Pseudomonas strains, respectively. However, up to 2.2 fold increase in total dry matter and salt tolerance index was observed due to combined inoculation of Rhizobium and Pseudomonas strains. So, combined application of Rhizobium and Pseudomonas strains could be explored as an effective strategy to induce osmotic stress tolerance in mung bean.

40 CFR 180.337 - Oxytetracycline; tolerance for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Oxytetracycline; tolerance for... § 180.337 Oxytetracycline; tolerance for residues. Tolerances are established for residues of the pesticide oxytetracycline in or on the following raw agricultural commodities: Commodity Parts per million...

Tolerance of snakes to hypergravity

Science.gov (United States)

Lillywhite, H. B.; Ballard, R. E.; Hargens, A. R.

1996-01-01

Sensitivity of carotid blood flow to increased gravitational force acting in the head-to-tail direction(+Gz) was studied in diverse species of snakes hypothesized to show adaptive variation of response. Tolerance to increased gravity was measured red as the maximum graded acceleration force at which carotid blood flow ceased and was shown to vary according to gravitational adaptation of species defined by their ecology and behavior. Multiple regression analysis showed that gravitational habitat, but not body length, had a significant effect on Gz tolerance. At the extremes, carotid blood flow decreased in response to increasing G force and approached zero near +1 Gz in aquatic and ground-dwelling species, whereas in climbing species carotid flow was maintained at forces in excess of +2 Gz. Tolerant (arboreal) species were able to withstand hypergravic forces of +2 to +3 Gz for periods up to 1 h without cessation of carotid blood flow or loss of body movement and tongue flicking. Data suggest that the relatively tight skin characteristic of tolerant species provides a natural antigravity suit and is of prime importance in counteracting Gz stress on blood circulation.

A reassessment of the presumed Neandertal remains from San Bernardino Cave, Italy.

Science.gov (United States)

Benazzi, Stefano; Peresani, Marco; Talamo, Sahra; Fu, Qiaomei; Mannino, Marcello A; Richards, Michael P; Hublin, Jean-Jacques

2014-01-01

In 1986-1987, three human remains were unearthed from macro-unit II of San Bernardino Cave (Berici Hills, Veneto, Italy), a deposit containing a late Mousterian lithic assemblage. The human remains (a distal phalanx, a lower right third molar and a lower right second deciduous incisor) do not show diagnostic morphological features that could be used to determine whether they were from Homo neanderthalensis or Homo sapiens. Despite being of small size, and thus more similar to recent H. sapiens, the specimens were attributed to Neandertals, primarily because they were found in Mousterian layers. We carried out a taxonomic reassessment of the lower right third molar (LRM3; San Bernardino 4) using digital morphometric analysis of the root, ancient DNA analysis, carbon and nitrogen isotope analyses, and direct accelerator mass spectrometry (AMS) radiocarbon dating of dentine collagen. Mitochondrial DNA analysis and root morphology show that the molar belongs to a modern human and not to a Neandertal. Carbon 14 ((14)C) dating of the molar attributes it to the end of the Middle Ages (1420-1480 cal AD, 2 sigma). Carbon and nitrogen isotope analyses suggest that the individual in question had a diet similar to that of Medieval Italians. These results show that the molar, as well as the other two human remains, belong to recent H. sapiens and were introduced in the Mousterian levels post-depositionally. Copyright © 2013 Elsevier Ltd. All rights reserved.

Lunar bulk chemical composition: a post-Gravity Recovery and Interior Laboratory reassessment.

Science.gov (United States)

Taylor, G Jeffrey; Wieczorek, Mark A

2014-09-13

New estimates of the thickness of the lunar highlands crust based on data from the Gravity Recovery and Interior Laboratory mission, allow us to reassess the abundances of refractory elements in the Moon. Previous estimates of the Moon fall into two distinct groups: earthlike and a 50% enrichment in the Moon compared with the Earth. Revised crustal thicknesses and compositional information from remote sensing and lunar samples indicate that the crust contributes 1.13-1.85 wt% Al2O3 to the bulk Moon abundance. Mare basalt Al2O3 concentrations (8-10 wt%) and Al2O3 partitioning behaviour between melt and pyroxene during partial melting indicate mantle Al2O3 concentration in the range 1.3-3.1 wt%, depending on the relative amounts of pyroxene and olivine. Using crustal and mantle mass fractions, we show that that the Moon and the Earth most likely have the same (within 20%) concentrations of refractory elements. This allows us to use correlations between pairs of refractory and volatile elements to confirm that lunar abundances of moderately volatile elements such as K, Rb and Cs are depleted by 75% in the Moon compared with the Earth and that highly volatile elements, such as Tl and Cd, are depleted by 99%. The earthlike refractory abundances and depleted volatile abundances are strong constraints on lunar formation processes. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Infectious Tolerance

Science.gov (United States)

Jonuleit, Helmut; Schmitt, Edgar; Kakirman, Hacer; Stassen, Michael; Knop, Jürgen; Enk, Alexander H.

2002-01-01

Regulatory CD4+CD25+ T cells (Treg) are mandatory for maintaining immunologic self-tolerance. We demonstrate that the cell-cell contact–mediated suppression of conventional CD4+ T cells by human CD25+ Treg cells is fixation resistant, independent from membrane-bound TGF-β but requires activation and protein synthesis of CD25+ Treg cells. Coactivation of CD25+ Treg cells with Treg cell–depleted CD4+ T cells results in anergized CD4+ T cells that in turn inhibit the activation of conventional, freshly isolated CD4+ T helper (Th) cells. This infectious suppressive activity, transferred from CD25+ Treg cells via cell contact, is cell contact–independent and partially mediated by soluble transforming growth factor (TGF)-β. The induction of suppressive properties in conventional CD4+ Th cells represents a mechanism underlying the phenomenon of infectious tolerance. This explains previously published conflicting data on the role of TGF-β in CD25+ Treg cell–induced immunosuppression. PMID:12119350

Repressive Tolerance and the Practice of Adult Education

Science.gov (United States)

Brookfield, Stephen D.

2014-01-01

Herbert Marcuse's concept of repressive tolerance argues that behind the justification of tolerance lies the possibility of ideological domination. Tolerance allows intolerable practices to go unchallenged and flattens discussion to assume all viewpoints have equal validity. When alternative, dissenting views are inserted into the curriculum…

Haloperidol Disrupts Opioid-Antinociceptive Tolerance and Physical Dependence

Science.gov (United States)

Yang, Cheng; Chen, Yan; Tang, Lei

2011-01-01

Previous studies from our laboratory and others have implicated a critical role of Ca2+/calmodulin-dependent protein kinase II (CaMKII) in opioid tolerance and dependence. Translational research targeting the CaMKII pathway is challenging, if not impossible, because of a lack of selective inhibitors. We discovered in a preliminary study that haloperidol, a butyrophenone antipsychotic drug, inhibited CaMKII, which led us to hypothesize that haloperidol can attenuate opioid tolerance and dependence by inhibiting CaMKII. The hypothesis was tested in two rodent models of opioid tolerance and dependence. Pretreatment with haloperidol (0.2–1.0 mg/kg i.p.) prevented the development of morphine tolerance and dependence in a dose-dependent manner. Short-term treatment with haloperidol (0.06–0.60 mg/kg i.p.) dose-dependently reversed the established morphine-antinociceptive tolerance and physical dependence. Correlating with behavioral effects, pretreatment or short-term treatment with haloperidol dose-dependently inhibited morphine-induced up-regulation of supraspinal and spinal CaMKIIα activity. Moreover, haloperidol given orally was also effective in attenuating morphine-induced CaMKIIα activity, antinociceptive tolerance, and physical dependence. Taken together, these data suggest that haloperidol attenuates opioid tolerance and dependence by suppressing CaMKII activity. Because haloperidol is a clinically used drug that can be taken orally, we propose that the drug may be of use in attenuating opioid tolerance and dependence. PMID:21436292

Three-dimensional tolerance investigation on main ITER components

International Nuclear Information System (INIS)

Reich, J.; Chiocchio, S.; Cordier, J.-J.; Gallix, R.; Guerin, O.; Halcrow, T.

2009-01-01

ITER has to focus on all processes that ensure the permanent consistency between the requirements of ITER and the performance attributes of its components. This includes integration tolerance studies. One of the main goals of this work is to establish a sufficient tolerance scheme for all main components. The investigation in sufficient tolerance studies at a very early stage of the project will result in cost savings during the installation process. Due to the complexity of the ITER components and their several interfaces to their surroundings, it is advantageous to perform tolerance studies with a specialised tool like 'three-dimensional control systems' (3DCS) that is compatible with the ITER CATIA-V5 CAD engineering system and Enovia PRC environment. On single components (e.g. Magnet TF Coils) detailed two-dimensional tolerance schemes have been developed from the beginning. Using them as a starting point, functional or key interface tolerances have to be defined. Furthermore the tolerance studies have to consider the different configurations of each component (e.g. manufacturing stages, assembly plan, integration with surrounding, operation conditions). Especially for assembly it is necessary to analyse the final ranges which have to be achieved during the installation process. From the integration point of view, the key tolerances of all main in-cryostat ITER components have to be brought together in a complete and consistent manner.

Fault tolerant linear actuator

Science.gov (United States)

Tesar, Delbert

2004-09-14

In varying embodiments, the fault tolerant linear actuator of the present invention is a new and improved linear actuator with fault tolerance and positional control that may incorporate velocity summing, force summing, or a combination of the two. In one embodiment, the invention offers a velocity summing arrangement with a differential gear between two prime movers driving a cage, which then drives a linear spindle screw transmission. Other embodiments feature two prime movers driving separate linear spindle screw transmissions, one internal and one external, in a totally concentric and compact integrated module.

Oral tolerance induction for human food allergy.

Science.gov (United States)

Noh, Geunwoong; Lee, Jae Ho

2012-04-01

Food allergies are classified as IgE-mediated and non-IgE mediated type. The number of successful reports of immunotherapy, namely tolerance induction for food allergy (TIFA) are increasing, bringing hope for meaningful positive and radical treatment of food allergy. Therapeutic characteristics of the clinical course in TIFA for NFA are different from TIFA for IFA. Cytokines including IL-10, TGF-β and IFN-γ and regulatory cells such as Treg and Breg, are involved in immune tolerance. IFN-γ has been used for tolerance induction of food allergy as an immunomodulatory biologics. A definitive distinction between IgE-mediated and non-IgE-mediated food allergies is absolutely essential for diagnostic and therapeutic purposes. Original SOTI using IFN-γ is more effective then conventional SOTI without IFN-γ. Especially, IFN-γ is absolutely necessary for the tolerance induction of NFA. This review highlights and updates the advances in the conceptual immunological background and the clinical characteristics of oral tolerance induction for food allergy.

Cognitive component of Tolerance in Pedagogic Education

Directory of Open Access Journals (Sweden)

O. V. Akimova

2013-01-01

Full Text Available The paper looks at one of the urgent educational problems of tolerance development by teachers and students; tolerance being viewed as the openness to the new knowledge acquisition, willingness to understand other people and cooperate with them, and therefore the opportunity for self- development.The paper outlines the ways of tolerant attitudes formation by all the human subjects of educational process; the concept of person oriented teaching is considered to be the basic one for tolerance development. To optimize the specialists’ training for communication at any level of professional environment, the cognitive activity educational model is suggested, providing the ways out of any complicated pedagogical situation. The cognitive psychology concepts give the background for the above model. The education in question promotes the intellectual level of the prospective teachers, intensifies their creative potential, methodological thinking and practical experience, as well as tolerance development in professional communication process. 

Behavioral Tolerance to Anticholinergic Agents

Science.gov (United States)

1986-11-20

Medicine , 47, 137-141. 7. Kurtz, P.J. (1977) Behavioral and biochemical effects of the carbamate insecticide, mobam. Pharmacology Biochemistry & Behavior...tolerance to marihuana in rats. Pharmacology Biochemistry and Behavior, 1, 73-76. 43 40. Olson, J. and Carder, B. (1974) Behavioral tolerance to... marihuana as a function of amount of prior training. Pharmacology Biochemistry and Behavior, 2, 243-247. 41. Sidman, M. (1960) Tactics of Scientific

Generalized tolerance sensitivity and DEA metric sensitivity

OpenAIRE

Neralić, Luka; E. Wendell, Richard

2015-01-01

This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA). Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.

Generalized tolerance sensitivity and DEA metric sensitivity

Directory of Open Access Journals (Sweden)

Luka Neralić

2015-03-01

Full Text Available This paper considers the relationship between Tolerance sensitivity analysis in optimization and metric sensitivity analysis in Data Envelopment Analysis (DEA. Herein, we extend the results on the generalized Tolerance framework proposed by Wendell and Chen and show how this framework includes DEA metric sensitivity as a special case. Further, we note how recent results in Tolerance sensitivity suggest some possible extensions of the results in DEA metric sensitivity.

TOLERANCE SENSITIVITY ANALYSIS: THIRTY YEARS LATER

Directory of Open Access Journals (Sweden)

Richard E. Wendell

2010-12-01

Full Text Available Tolerance sensitivity analysis was conceived in 1980 as a pragmatic approach to effectively characterize a parametric region over which objective function coefficients and right-hand-side terms in linear programming could vary simultaneously and independently while maintaining the same optimal basis. As originally proposed, the tolerance region corresponds to the maximum percentage by which coefficients or terms could vary from their estimated values. Over the last thirty years the original results have been extended in a number of ways and applied in a variety of applications. This paper is a critical review of tolerance sensitivity analysis, including extensions and applications.

40 CFR 180.511 - Buprofezin; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Buprofezin; tolerances for residues... § 180.511 Buprofezin; tolerances for residues. (a) General. Tolerances are established for residues of buprofezin, including its metabolites and degradates in or on the commodities in the table below. Compliance...

7 CFR 801.4 - Tolerances for dockage testers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for dockage testers. 801.4 Section 801.4 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.4 Tolerances for dockage testers. The maintenance tolerances for...

7 CFR 801.6 - Tolerances for moisture meters.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for moisture meters. 801.6 Section 801.6 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.6 Tolerances for moisture meters. (a) The maintenance tolerances...

7 CFR 801.3 - Tolerances for barley pearlers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for barley pearlers. 801.3 Section 801.3 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.3 Tolerances for barley pearlers. The maintenance tolerances for...

Mechanism of oral tolerance induction to therapeutic proteins.

Science.gov (United States)

Wang, Xiaomei; Sherman, Alexandra; Liao, Gongxian; Leong, Kam W; Daniell, Henry; Terhorst, Cox; Herzog, Roland W

2013-06-15

Oral tolerance is defined as the specific suppression of humoral and/or cellular immune responses to an antigen by administration of the same antigen through the oral route. Due to its absence of toxicity, easy administration, and antigen specificity, oral tolerance is a very attractive approach to prevent unwanted immune responses that cause a variety of diseases or that complicate treatment of a disease. Many researchers have induced oral tolerance to efficiently treat autoimmune and inflammatory diseases in different animal models. However, clinical trials yielded limited success. Thus, understanding the mechanisms of oral tolerance induction to therapeutic proteins is critical for paving the way for clinical development of oral tolerance protocols. This review will summarize progress on understanding the major underlying tolerance mechanisms and contributors, including antigen presenting cells, regulatory T cells, cytokines, and signaling pathways. Potential applications, examples for therapeutic proteins and disease targets, and recent developments in delivery methods are discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

B cells in operational tolerance.

Science.gov (United States)

Chesneau, M; Danger, R; Soulillou, J-P; Brouard, S

2018-02-16

Transplantation is currently the therapy of choice for endstage organ failure even though it requires long-term immunosuppresive therapy, with its numerous side effects, for acceptance of the transplanted organ. In rare cases however, patients develop operational tolerance, that is, graft survival without immunosuppression. Studies conducted on these patients reveal genetic, phenotypic, and functional signatures. They provide a better understanding of the immunological mechanisms involved in operational tolerance and define biomarkers that could be used to adapt immunosuppressive treatment to the individual, safely reduce immunosuppression doses, and ideally and safely guide immunosuppression withdrawal. This review summarizes studies that suggest a role for B cells as biomarkers of operational tolerance and discusses the use of B cells as a predictive tool for immunologic risk. Copyright © 2018. Published by Elsevier Inc.

Behavioral Assessment of the Negative Emotion Aspect of Distress Tolerance.

Science.gov (United States)

Veilleux, Jennifer C; Pollert, Garrett A; Zielinski, Melissa J; Shaver, Jennifer A; Hill, Morgan A

2017-01-01

The current behavioral tasks assessing distress tolerance measure tolerance to frustration and tolerance to physical discomfort, but do not explicitly assess tolerance to negative emotion. We closely evaluated the conceptual distinctions between current behavioral tasks and self-report tasks assessing distress tolerance, and then developed a new behavioral distress tolerance task called the Emotional Image Tolerance (EIT) task. The EIT task retains elements of existing behavioral tasks (e.g., indices of persistence) while augmenting the reliability and content sufficiency of existing measures by including multiple trials, including a variety of negative affect stimuli, and separating overall task persistence from task persistence after onset of distress. In a series of three studies, we found that the EIT correlated with extant behavioral measures of distress tolerance, the computerized mirror-tracing task and a physical cold pressor task. Across all of the studies, we also evaluated whether the EIT correlated with self-report measures of distress tolerance and measures of psychopathology (e.g., depression, anxiety, and binge eating). Implications for the refinement of the distress tolerance construct are discussed.

40 CFR 180.342 - Chlorpyrifos; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Chlorpyrifos; tolerances for residues... § 180.342 Chlorpyrifos; tolerances for residues. (a) General. (1) Tolerances are established for residues of the pesticide chlorpyrifos per se (O,O-diethyl- O-(3,5,6-trichloro-2-pyridyl) phosphorothioate...

40 CFR 180.106 - Diuron; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Diuron; tolerances for residues. 180... Diuron; tolerances for residues. (a) General. Tolerances are established for the combined residues of the herbicide diuron, 3-(3,4-dichlorophenyl)-1,1-dimethylurea and its metabolites convertible to 3,4...

49 CFR 350.339 - What are tolerance guidelines?

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false What are tolerance guidelines? 350.339 Section 350... MOTOR CARRIER SAFETY ASSISTANCE PROGRAM Funding § 350.339 What are tolerance guidelines? Tolerance guidelines set forth the limited deviations from the FMCSRs allowed in your State's laws and regulations...

76 FR 27268 - Glyphosate; Pesticide Tolerance

Science.gov (United States)

2011-05-11

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 180 [EPA-HQ-OPP-2010-0938; FRL-8872-6] Glyphosate... regulation increases the established tolerance for residues of glyphosate in or on corn, field, forage... tolerance for residues of the herbicide glyphosate, N-(phosphonomethyl) glycine, in or on corn, field...

75 FR 26662 - Fluazinam; Pesticide Tolerances

Science.gov (United States)

2010-05-12

... due to systemic toxicity and not a result of frank neurotoxicity. No signs of neurotoxicity were... chromatography with electron capture detection (GC/ECD), is available to enforce the tolerance expression for...) enforcement method is also available to enforce the tolerance expression for wine grapes, which includes...

SCHEME ANALYSIS TREE DIMENSIONS AND TOLERANCES PROCESSING

OpenAIRE

Constanta RADULESCU; Liviu Marius CÎRŢÎNĂ; Constantin MILITARU

2011-01-01

This paper presents one of the steps that help us to determine the optimal tolerances depending on thetechnological capability of processing equipment. To determine the tolerances in this way is necessary to takethe study and to represent schematically the operations are used in technological process of making a piece.Also in this phase will make the tree diagram of the dimensions and machining tolerances, dimensions andtolerances shown that the design execution. Determination processes, and ...

Mast cell degranulation breaks peripheral tolerance.

Science.gov (United States)

de Vries, V C; Wasiuk, A; Bennett, K A; Benson, M J; Elgueta, R; Waldschmidt, T J; Noelle, R J

2009-10-01

Mast cells (MC) have been shown to mediate regulatory T-cell (T(reg))-dependent, peripheral allograft tolerance in both skin and cardiac transplants. Furthermore, T(reg) have been implicated in mitigating IgE-mediated MC degranulation, establishing a dynamic, reciprocal relationship between MC and T(reg) in controlling inflammation. In an allograft tolerance model, it is now shown that intragraft or systemic MC degranulation results in the transient loss of T(reg) suppressor activities with the acute, T-cell dependent rejection of established, tolerant allografts. Upon degranulation, MC mediators can be found in the skin, T(reg) rapidly leave the graft, MC accumulate in the regional lymph node and the T(reg) are impaired in the expression of suppressor molecules. Such a dramatic reversal of T(reg) function and tissue distribution by MC degranulation underscores how allergy may causes the transient breakdown of peripheral tolerance and episodes of acute T-cell inflammation.

CYCLOXYDIM-TOLERANT MAIZE – BREEDERS STANDPOINT

Directory of Open Access Journals (Sweden)

G. Bekavac

2008-09-01

Full Text Available Cycloxydim-Tolerant Maize (CTM was developed by researches at the University of Minnesota. CTM plants were regenerated from tissue culture selected for callus growth in the presence of cycloxydim, and the resulting plants were shown to contain a nuclear mutation, expressed as a single, partially dominant gene (known as Acc1 that conferred tolerance to the herbicide. Cycloxydim is a systemic herbicide for post emergence application in dicot crops to selectively control grass weeds. Corn, like most grasses is susceptible to cycloxydim due to inhibited acetyl-coenzyimeA carboxylaze enzyme activity. There are two key benefits of this technology: first, cycloxydim applications in CTM hybrids can be delayed until the weed spectrum and population density exceed agro-economic threshold; second, cycloxydim can be applied at either stage of plant development with no effect on basic agronomic traits, compared to non treated plants. Nevertheless, this type of tolerance requires 2 genes to be fully effective, i.e. gene must be present in both inbred parents to provide complete tolerance in the resulting hybrid. Such type of tolerance doubles the chances for yield drag and doubles the number of inbred conversions needed. This also limits germplasm integration and increases time lag in developing hybrids. Despite these difficulties, many seed companies introduce tolerance to cycloxydim into their commercial inbreds, and many of them have already commercialized CTM hybrids. Finally, it came as a logical question what is more important – hybrid performance or new trait? Critical to the success of this technology has been yield performance of CTM hybrids. At the same time, performance and herbicide tolerance do not exclude each other and can surely co-exist. To be accepted, this coexistence must secure high profitability to corn producers. However, CTM hybrids will not replace conventional ones on a large scale, but could be used as a specific tool, or could

Tolerance for uncertainty in elderly people

Directory of Open Access Journals (Sweden)

KHRYSTYNA KACHMARYK

2014-09-01

Full Text Available The aim of the study. The aim of the paper is a comparison of tolerance to uncertainty in two groups of elderly: the students of the University of the Third Age (UTA and older people who are not enrolled but help to educate grandchildren. A relation to uncertainty was shown to influence on decision making strategy of elderly that indicates on importance of the researches. Methods. To obtain the objectives of the paper the following methods were used: 1 Personal change readiness survey (PCRS adapted by Nickolay Bazhanov and Galina Bardiyer; 2 Tolerance Ambiguity Scale (TAS adapted by Galina Soldatova; 3 Freiburg personality inventory (FPI and 4 The questionnaire of self-relation by Vladimir Stolin and Sergej Panteleev. 40 socially involved elderly people were investigated according the above methods, 20 from UTA and 20 who are not studied and served as control group. Results. It was shown that relations of tolerance to uncertainty in the study group of students of the University of the Third Age substantially differ from relations of tolerance to uncertainty in group of older people who do not learn. The majority of students of the University of the Third Age have an inherent low tolerance for uncertainty, which is associated with an increase in expression personality traits and characteristics in self-relation. The group of the elderly who are not enrolled increasingly shows tolerance of uncertainty, focusing on the social and trusting relationship to meet the needs of communication, and the ability to manage their own emotions and desires than a group of Third Age university students. Conclusions. The results of experimental research of the third age university student’s peculiarities of the tolerance to uncertainty were outlined. It was found that decision making in the ambiguity situations concerning social interaction is well developed in elderly who do not study. The students of the University of Third Age have greater needs in

Cytokine regulation of immune tolerance

OpenAIRE

Wu, Jie; Xie, Aini; Chen, Wenhao

2014-01-01

The immune system provides defenses against invading pathogens while maintaining immune tolerance to self-antigens. This immune homeostasis is harmonized by the direct interactions between immune cells and the cytokine environment in which immune cells develop and function. Herein, we discuss three non-redundant paradigms by which cytokines maintain or break immune tolerance. We firstly describe how anti-inflammatory cytokines exert direct inhibitory effects on immune cells to enforce immune ...

Sex-specific starvation tolerance of copepods with different foraging strategies

DEFF Research Database (Denmark)

Holm, Mark Wejlemann; Torres, Rocio Rodriguez; van Someren Gréve, Hans

2018-01-01

in starvation tolerance are not due to dissimilarities in lipid reserves. Gender differences in starvation tolerance can be partially explained by body size differences between sexes. This indicates a minor influence of mate-seeking behaviour on male starvation tolerance, likely due to reduced mate......Planktonic copepods have sexual dimorphism that can lead to differences in starvation tolerance between genders. Additionally, mating may be energetically costly and thus reduce starvation tolerance. We investigated the influence of sexual dimorphism and mating on starvation tolerance of copepods...... with different feeding behaviours: Oithona nana (ambusher), Temora longicornis (feeding-current feeder) and Centropages typicus (cruiser). Males of C. typicus and O. nana had a starvation tolerance lower than females, whereas T. longicornis had a similar starvation tolerance between genders. Only O. nana males...

Tolerance limits and tolerance intervals for ratios of normal random variables using a bootstrap calibration.

Science.gov (United States)

Flouri, Marilena; Zhai, Shuyan; Mathew, Thomas; Bebu, Ionut

2017-05-01

This paper addresses the problem of deriving one-sided tolerance limits and two-sided tolerance intervals for a ratio of two random variables that follow a bivariate normal distribution, or a lognormal/normal distribution. The methodology that is developed uses nonparametric tolerance limits based on a parametric bootstrap sample, coupled with a bootstrap calibration in order to improve accuracy. The methodology is also adopted for computing confidence limits for the median of the ratio random variable. Numerical results are reported to demonstrate the accuracy of the proposed approach. The methodology is illustrated using examples where ratio random variables are of interest: an example on the radioactivity count in reverse transcriptase assays and an example from the area of cost-effectiveness analysis in health economics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Tolerance based algorithms for the ATSP

NARCIS (Netherlands)

Goldengorin, B; Sierksma, G; Turkensteen, M; Hromkovic, J; Nagl, M; Westfechtel, B

2004-01-01

In this paper we use arc tolerances, instead of arc costs, to improve Branch-and-Bound type algorithms for the Asymmetric Traveling Salesman Problem (ATSP). We derive new tighter lower bounds based on exact and approximate bottleneck upper tolerance values of the Assignment Problem (AP). It is shown

Political Socialization, Tolerance, and Sexual Identity

Science.gov (United States)

Avery, Patricia G.

2002-01-01

Key concepts in political socialization, tolerance, groups, rights and responsibilities can be used to understand the way in which young people struggle with sexual identity issues. Educators may promote greater tolerance for homosexuality among heterosexuals by situating sexual identity issues within a broader discussion of democratic principles.…

Adaptive Control Allocation for Fault Tolerant Overactuated Autonomous Vehicles

Science.gov (United States)

2007-11-01

Tolerant Overactuated Autonomous Vehicles Casavola, A.; Garone, E. (2007) Adaptive Control Allocation for Fault Tolerant Overactuated Autonomous ...Adaptive Control Allocation for Fault Tolerant Overactuated Autonomous Vehicles 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...Tolerant Overactuated Autonomous Vehicles 3.2 - 2 RTO-MP-AVT-145 UNCLASSIFIED/UNLIMITED Control allocation problem (CAP) - Given a virtual input v(t

Surface Hydrophobicity Causes SO2 Tolerance in Lichens

Science.gov (United States)

Hauck, Markus; Jürgens, Sascha-René; Brinkmann, Martin; Herminghaus, Stephan

2008-01-01

Background and Aims The superhydrophobicity of the thallus surface in one of the most SO2-tolerant lichen species, Lecanora conizaeoides, suggests that surface hydrophobicity could be a general feature of lichen symbioses controlling their tolerance to SO2. The study described here tests this hypothesis. Methods Water droplets of the size of a raindrop were placed on the surface of air-dry thalli in 50 lichen species of known SO2 tolerance and contact angles were measured to quantify hydrophobicity. Key Results The wettability of lichen thalli ranges from strongly hydrophobic to strongly hydrophilic. SO2 tolerance of the studied lichen species increased with increasing hydrophobicity of the thallus surface. Extraction of extracellular lichen secondary metabolites with acetone reduced, but did not abolish the hydrophobicity of lichen thalli. Conclusions Surface hydrophobicity is the main factor controlling SO2 tolerance in lichens. It presumably originally evolved as an adaptation to wet habitats preventing the depression of net photosynthesis due to supersaturation of the thallus with water. Hydrophilicity of lichen thalli is an adaptation to dry or humid, but not directly rain-exposed habitats. The crucial role of surface hydrophobicity in SO2 also explains why many markedly SO2-tolerant species are additionally tolerant to other (chemically unrelated) toxic substances including heavy metals. PMID:18077467

Genomic Selection Improves Heat Tolerance in Dairy Cattle

Science.gov (United States)

Garner, J. B.; Douglas, M. L.; Williams, S. R. O; Wales, W. J.; Marett, L. C.; Nguyen, T. T. T.; Reich, C. M.; Hayes, B. J.

2016-01-01

Dairy products are a key source of valuable proteins and fats for many millions of people worldwide. Dairy cattle are highly susceptible to heat-stress induced decline in milk production, and as the frequency and duration of heat-stress events increases, the long term security of nutrition from dairy products is threatened. Identification of dairy cattle more tolerant of heat stress conditions would be an important progression towards breeding better adapted dairy herds to future climates. Breeding for heat tolerance could be accelerated with genomic selection, using genome wide DNA markers that predict tolerance to heat stress. Here we demonstrate the value of genomic predictions for heat tolerance in cohorts of Holstein cows predicted to be heat tolerant and heat susceptible using controlled-climate chambers simulating a moderate heatwave event. Not only was the heat challenge stimulated decline in milk production less in cows genomically predicted to be heat-tolerant, physiological indicators such as rectal and intra-vaginal temperatures had reduced increases over the 4 day heat challenge. This demonstrates that genomic selection for heat tolerance in dairy cattle is a step towards securing a valuable source of nutrition and improving animal welfare facing a future with predicted increases in heat stress events. PMID:27682591

Consideration of the volume dependence of tolerance doses

International Nuclear Information System (INIS)

Gremmel, H.; Wendhausen, H.

1977-01-01

A general formula for consideration of the dependence of tolerance doses upon volume is obtained by mathematical evaluation of known skin tolerance doses. The validity for different organs is verified using available data of literature. It is recommended to introduce the volume dependence into the Ellis-formula for tolerance doses. (orig.) [de

Diffuse urban pollution increases metal tolerance of natural heterotrophic biofilms

International Nuclear Information System (INIS)

Fechner, Lise C.; Gourlay-Francé, Catherine; Bourgeault, Adeline; Tusseau-Vuillemin, Marie-Hélène

2012-01-01

This study is a first attempt to investigate the impact of urban contamination on metal tolerance of heterotrophic river biofilms using a short-term test based on β-glucosidase activity. Tolerance levels to Cu, Cd, Zn, Ni and Pb were evaluated for biofilms collected at three sites along an urban gradient in the Seine river (France). Metallic pollution increased along the river, but concentrations remained low compared to environmental quality standards. Biofilm metal tolerance increased downstream from the urban area. Multivariate analysis confirmed the correlation between tolerance and contamination and between multi-metallic and physico-chemical gradients. Therefore, tolerance levels have to be interpreted in relation to the whole chemical and physical characteristics and not solely metal exposure. We conclude that community tolerance is a sensitive biological response to urban pressure and that mixtures of contaminants at levels lower than quality standards might have a significant impact on periphytic communities. - Highlights: ► A new short-term test based on β-glucosidase activity to assess biofilm metal tolerance. ► Cd, Cu, Ni, Pb and Zn tolerance of natural biofilms collected along an urban gradient. ► Metal tolerance levels increase upstream to downstream the river. ► Community tolerance increases at environmental quality standard exposure concentrations. ► Biofilm tolerance is a sensitive biological response to diffuse urban pollution. - Metal concentrations below environmental quality standards increase tolerance levels of natural, hetetrophic biofilms downstream from an urban area.

Toward Human-Carnivore Coexistence: Understanding Tolerance for Tigers in Bangladesh.

Science.gov (United States)

Inskip, Chloe; Carter, Neil; Riley, Shawn; Roberts, Thomas; MacMillan, Douglas

2016-01-01

Fostering local community tolerance for endangered carnivores, such as tigers (Panthera tigris), is a core component of many conservation strategies. Identification of antecedents of tolerance will facilitate the development of effective tolerance-building conservation action and secure local community support for, and involvement in, conservation initiatives. We use a stated preference approach for measuring tolerance, based on the 'Wildlife Stakeholder Acceptance Capacity' concept, to explore villagers' tolerance levels for tigers in the Bangladesh Sundarbans, an area where, at the time of the research, human-tiger conflict was severe. We apply structural equation modeling to test an a priori defined theoretical model of tolerance and identify the experiential and psychological basis of tolerance in this community. Our results indicate that beliefs about tigers and about the perceived current tiger population trend are predictors of tolerance for tigers. Positive beliefs about tigers and a belief that the tiger population is not currently increasing are both associated with greater stated tolerance for the species. Contrary to commonly-held notions, negative experiences with tigers do not directly affect tolerance levels; instead, their effect is mediated by villagers' beliefs about tigers and risk perceptions concerning human-tiger conflict incidents. These findings highlight a need to explore and understand the socio-psychological factors that encourage tolerance towards endangered species. Our research also demonstrates the applicability of this approach to tolerance research to a wide range of socio-economic and cultural contexts and reveals its capacity to enhance carnivore conservation efforts worldwide.

Plant Tolerance: A Unique Approach to Control Hemipteran Pests.

Science.gov (United States)

Koch, Kyle G; Chapman, Kaitlin; Louis, Joe; Heng-Moss, Tiffany; Sarath, Gautam

2016-01-01

Plant tolerance to insect pests has been indicated to be a unique category of resistance, however, very little information is available on the mechanism of tolerance against insect pests. Tolerance is distinctive in terms of the plant's ability to withstand or recover from herbivore injury through growth and compensatory physiological processes. Because plant tolerance involves plant compensatory characteristics, the plant is able to harbor large numbers of herbivores without interfering with the insect pest's physiology or behavior. Some studies have observed that tolerant plants can compensate photosynthetically by avoiding feedback inhibition and impaired electron flow through photosystem II that occurs as a result of insect feeding. Similarly, the up-regulation of peroxidases and other oxidative enzymes during insect feeding, in conjunction with elevated levels of phytohormones can play an important role in providing plant tolerance to insect pests. Hemipteran insects comprise some of the most economically important plant pests (e.g., aphids, whiteflies), due to their ability to achieve high population growth and their potential to transmit plant viruses. In this review, results from studies on plant tolerance to hemipterans are summarized, and potential models to understand tolerance are presented.

Aluminum tolerance association mapping in triticale

Directory of Open Access Journals (Sweden)

Niedziela Agnieszka

2012-02-01

Full Text Available Abstract Background Crop production practices and industrialization processes result in increasing acidification of arable soils. At lower pH levels (below 5.0, aluminum (Al remains in a cationic form that is toxic to plants, reducing growth and yield. The effect of aluminum on agronomic performance is particularly important in cereals like wheat, which has promoted the development of programs directed towards selection of tolerant forms. Even in intermediately tolerant cereals (i.e., triticale, the decrease in yield may be significant. In triticale, Al tolerance seems to be influenced by both wheat and rye genomes. However, little is known about the precise chromosomal location of tolerance-related genes, and whether wheat or rye genomes are crucial for the expression of that trait in the hybrid. Results A mapping population consisting of 232 advanced breeding triticale forms was developed and phenotyped for Al tolerance using physiological tests. AFLP, SSR and DArT marker platforms were applied to obtain a sufficiently large set of molecular markers (over 3000. Associations between the markers and the trait were tested using General (GLM and Multiple (MLM Linear Models, as well as the Statistical Machine Learning (SML approach. The chromosomal locations of candidate markers were verified based on known assignments of SSRs and DArTs or by using genetic maps of rye and triticale. Two candidate markers on chromosome 3R and 9, 15 and 11 on chromosomes 4R, 6R and 7R, respectively, were identified. The r2 values were between 0.066 and 0.220 in most cases, indicating a good fit of the data, with better results obtained with the GML than the MLM approach. Several QTLs on rye chromosomes appeared to be involved in the phenotypic expression of the trait, suggesting that rye genome factors are predominantly responsible for Al tolerance in triticale. Conclusions The Diversity Arrays Technology was applied successfully to association mapping studies

Variation Tolerant On-Chip Interconnects

CERN Document Server

Nigussie, Ethiopia Enideg

2012-01-01

This book presents design techniques, analysis and implementation of high performance and power efficient, variation tolerant on-chip interconnects.  Given the design paradigm shift to multi-core, interconnect-centric designs and the increase in sources of variability and their impact in sub-100nm technologies, this book will be an invaluable reference for anyone concerned with the design of next generation, high-performance electronics systems. Provides comprehensive, circuit-level explanation of high-performance, energy-efficient, variation-tolerant on-chip interconnect; Describes design techniques to mitigate problems caused by variation; Includes techniques for design and implementation of self-timed on-chip interconnect, delay variation insensitive communication protocols, high speed signaling techniques and circuits, bit-width independent completion detection and process, voltage and temperature variation tolerance.                          

Mechanisms of flood tolerance in wheat and rice

DEFF Research Database (Denmark)

Herzog, Max

Most crops are sensitive to excess water, and consequently floods have detrimental effects on crop yields worldwide. In addition, global climate change is expected to regionally increase the number of floods within decades, urging for more flood-tolerant crop cultivars to be released. The aim...... of this thesis was to assess mechanisms conferring rice (Oryza sativa) and wheat (Triticum aestivum) flood tolerance, focusing on the role of leaf gas films during plant submergence. Reviewing the literature showed that wheat germplasm holds genetic variation towards waterlogging (soil flooding), and highlighted...... that the contrasting submergence tolerance could rather be governed by tolerance to radical oxygen species or contrasting metabolic responses (other than carbohydrate consumption) to ethylene accumulation. Manipulating leaf gas film presence affected wheat and rice submergence tolerance such as plant growth...

A measure of vulnerability and damage tolerance

International Nuclear Information System (INIS)

Lind, Niels C.

1995-01-01

The purpose of the paper is to present probabilistic definitions of 'vulnerability' and 'damage tolerance'. A new measure of damage is also proposed. Disastrous failures, such as of the Titanic or the Chernobyl reactor, have revealed that some systems can be highly vulnerable. A seemingly insignificant damage can reduce such a system's resistance severely. Attempts to write design code requirements for damage tolerance or structural integrity have not been successful so far. One reason is that these ideas have not been defined with the necessary precision. The suggested definitions aim to be general, applicable to all engineered systems, and readily specializable to particular system types. Vulnerability is defined as the ratio of the failure probability of the damaged system to the failure probability of the undamaged system. It is argued that 'vulnerability' and 'damage tolerance' are complementary concepts. Damage tolerance is defined as the reciprocal of vulnerability. Vulnerability and damage tolerance both concern hypothetical future damage. A damage factor, applicable for the analysis of an existing structure in an assessed state of damage, is defined analogous to vulnerability. Application is illustrated by examples

Tolerance Verification of Micro and Nano Structures on Polycarbonate Substrates

DEFF Research Database (Denmark)

Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

2010-01-01

Micro and nano structures are an increasing challenge in terms of tolerance verification and process quality control: smaller dimensions led to a smaller tolerance zone to be evaluated. This paper focuses on the verification of CD, DVD and HD-DVD nanoscale features. CD tolerance features are defi......Micro and nano structures are an increasing challenge in terms of tolerance verification and process quality control: smaller dimensions led to a smaller tolerance zone to be evaluated. This paper focuses on the verification of CD, DVD and HD-DVD nanoscale features. CD tolerance features...

The linear sizes tolerances and fits system modernization

Science.gov (United States)

Glukhov, V. I.; Grinevich, V. A.; Shalay, V. V.

2018-04-01

The study is carried out on the urgent topic for technical products quality providing in the tolerancing process of the component parts. The aim of the paper is to develop alternatives for improving the system linear sizes tolerances and dimensional fits in the international standard ISO 286-1. The tasks of the work are, firstly, to classify as linear sizes the elements additionally linear coordinating sizes that determine the detail elements location and, secondly, to justify the basic deviation of the tolerance interval for the element's linear size. The geometrical modeling method of real details elements, the analytical and experimental methods are used in the research. It is shown that the linear coordinates are the dimensional basis of the elements linear sizes. To standardize the accuracy of linear coordinating sizes in all accuracy classes, it is sufficient to select in the standardized tolerance system only one tolerance interval with symmetrical deviations: Js for internal dimensional elements (holes) and js for external elements (shafts). The main deviation of this coordinating tolerance is the average zero deviation, which coincides with the nominal value of the coordinating size. Other intervals of the tolerance system are remained for normalizing the accuracy of the elements linear sizes with a fundamental change in the basic deviation of all tolerance intervals is the maximum deviation corresponding to the limit of the element material: EI is the lower tolerance for the of the internal elements (holes) sizes and es is the upper tolerance deviation for the outer elements (shafts) sizes. It is the sizes of the material maximum that are involved in the of the dimensional elements mating of the shafts and holes and determine the fits type.

Women’s G Tolerance

Science.gov (United States)

1986-08-01

for the groups matched by age (70 pairs), weight sickness, uncomfortable feelings of distension in arms (26 pairs), and act~vity status (84 pairs...mass-spring-damper) s ,stem Straining G tolerance, being dpendent on skeletal having a resonant frequency above about I Hz. As muscular strength and...of the women’s G tolerance stud\\ scclic variations in muscular strength and endurance. was below 0.1 Hz (11), the production of any significant

Tolerance-based punishment in continuous public goods game

Science.gov (United States)

Gao, Jia; Li, Zhi; Cong, Rui; Wang, Long

2012-08-01

Altruistic punishment for defectors is considered as a key motive for the explanation of cooperation. However, there is no clear border between the cooperative and defective behaviors in a continuous strategy game. We propose a model to study the effect of punishment on the evolution of cooperation in continuous public goods game, wherein individuals have the traits to punish the co-players based on social tolerance. We show that a reasonable punishment with a uniform tolerance can spur individuals to make more investments. Additionally, for a fixed punishment cost and a fixed fine, a moderate value of tolerance can result in the best promotion of cooperation. Furthermore, we investigate the coevolutionary dynamics of investment and tolerance. We find that the population splits into two branches: high-tolerance individuals who make high investments and low-tolerance individuals who make low investments. A dynamic equilibrium is achieved between these two types of individuals. Our work extends punishment to continuous cooperative behaviors and the results may enhance the understanding of altruistic punishment in the evolution of human cooperation.

Simple Screening Methods for Drought and Heat Tolerance in Cowpea

International Nuclear Information System (INIS)

Singh, B. B.

2000-10-01

Success in breeding for drought tolerance has not been as pronounced as for other traits. This is partly due to lack of simple, cheap and reliable screening methods to select drought tolerant plants/progenies from the segregating populations and partly due to complexity of factors involved in drought tolerance. Measuring drought tolerance through physiological parameters is expensive, time consuming and difficult to use for screening large numbers of lines and segregating populations. Since several factors/mechanisms (in shoot and root) operate independently and/or jointly to enable plants to cope with drought stress, drought tolerance appears as a complex trait. However, if these factors/mechanisms can be separated and studied individually, the components leading to drought tolerance will appear less complex and may be easy to manipulate by breeders. We have developed a simple box screening method for shoot drought tolerance in cowpea, which eliminates the effects of roots and permits non-destructive visual identification of shoot dehydration tolerance. We have also developed a 'root-box pin-board' method to study two dimensional root architecture of individual plants. Using these methods, we have identified two mechanisms of shoot drought tolerance in cowpea which are controlled by single dominant genes and major difference for root architecture among cowpea varieties. Combining deep and dense root system with shoot dehydration tolerance results into highly drought tolerant plants

76 FR 79146 - Propylene Oxide; Proposed Tolerance Actions

Science.gov (United States)

2011-12-21

...: EPA is proposing to establish the tree nut crop group tolerance and separate tolerances on pistachio... (pistachios, pine nuts) in 40 CFR 180.491(a)(1) for residues of propylene oxide in or on pistachio at 300 ppm... pistachio at 10.0 ppm and nut, pine at 10.0 ppm. Establishment of tolerances for pistachios, pine nuts, and...

Intercultural Education of Tolerance and Hospitality

Science.gov (United States)

Dasli, Maria

2017-01-01

This paper aims to make a theoretical contribution to the current debate on intercultural education by focusing on the nature and limits of tolerance. Drawing on contemporary theorisations of the concept, it is suggested that while tolerance appears fundamental for confronting issues of difference, it has several caveats. The paper discusses the…

75 FR 69353 - Isoxaben; Pesticide Tolerances

Science.gov (United States)

2010-11-12

...; and pistachio. Dow AgroSciences requested these tolerances under the Federal Food, Drug, and Cosmetic... 0.01 ppm; and nut, tree, group 14 and pistachio at 0.03 ppm. That notice referenced a summary of the... the data supporting the petition, EPA has reduced the tolerances for nut, tree, group 14 and pistachio...

Selection of D-Alanine-Tolerant Rice Cells

OpenAIRE

Hisashi, Manabe; Koji, Ohira; Aizu Junior College of Fukushima Prefecture; Department of Agricultural Chemistry, Faculty of Agriculture, Tohoku University

1984-01-01

By repeating subculture of rice cells (parent cells) in a D-alanine containing medium, we could select rice cells which grew well in the D-alanine medium. The D-alanine-tolerant cells absorbed a fairly small amount of D-alanine from the medium and did not accumulate much D-alanine in the cells. Aggregation of D-alanine-tolerant cells was greater than that of parent cells. D-Alanine metabolism of D-alanine.-tolerant cells did not increase in comparison with parent cells.

Toward Human-Carnivore Coexistence: Understanding Tolerance for Tigers in Bangladesh.

Directory of Open Access Journals (Sweden)

Chloe Inskip

Full Text Available Fostering local community tolerance for endangered carnivores, such as tigers (Panthera tigris, is a core component of many conservation strategies. Identification of antecedents of tolerance will facilitate the development of effective tolerance-building conservation action and secure local community support for, and involvement in, conservation initiatives. We use a stated preference approach for measuring tolerance, based on the 'Wildlife Stakeholder Acceptance Capacity' concept, to explore villagers' tolerance levels for tigers in the Bangladesh Sundarbans, an area where, at the time of the research, human-tiger conflict was severe. We apply structural equation modeling to test an a priori defined theoretical model of tolerance and identify the experiential and psychological basis of tolerance in this community. Our results indicate that beliefs about tigers and about the perceived current tiger population trend are predictors of tolerance for tigers. Positive beliefs about tigers and a belief that the tiger population is not currently increasing are both associated with greater stated tolerance for the species. Contrary to commonly-held notions, negative experiences with tigers do not directly affect tolerance levels; instead, their effect is mediated by villagers' beliefs about tigers and risk perceptions concerning human-tiger conflict incidents. These findings highlight a need to explore and understand the socio-psychological factors that encourage tolerance towards endangered species. Our research also demonstrates the applicability of this approach to tolerance research to a wide range of socio-economic and cultural contexts and reveals its capacity to enhance carnivore conservation efforts worldwide.

Osmotic stress tolerance in semi-terrestrial tardigrades

DEFF Research Database (Denmark)

Heidemann, Nanna W T; Smith, Daniel K.; Hygum, Thomas L.

2016-01-01

Little is known about ionic and osmotic stress tolerance in tardigrades. Here, we examine salt stress tolerance in Ramazzottius oberhaeuseri and Echiniscus testudo from Nivå (Denmark) and address whether limno-terrestrial tardigrades can enter a state of quiescence (osmobiosis) in the face of high......-ionic osmolytes as compared to NaCl. Ramazzottius oberhaeuseri furthermore readily regained activity following gradual increases in non-ionic osmolytes and NaCl of up to 2434 ± 28 and 1905 ± 3 mOsm kg−1, respectively, showing that short-term acclimation promoted salt stress tolerance. Our results suggest...... that the limno-terrestrial R. oberhaeuseri enters a state of quiescence in the face of high external osmotic pressure and that it, in this state, is highly tolerant of ionic and osmotic stress....

Øger social tillid den etniske tolerance?

DEFF Research Database (Denmark)

Simonsen, Kristina Bakkær; Thomsen, Jens Peter Frølund

2013-01-01

that the relationship between social trust and ethnic tolerance is very weak among those who strongly prefer national cultural homogeneity. This finding suggests that parts of the international literature have overestimated the ability of social trust to create inclusive and coherent societies. The empirical analysis......Does Social Trust Increase Ethnic Tolerance? An Analysis of Cultural Reservations Previous research has emphasized that social trust makes modern societies more cohesive. Social trust is commonly defined as a faith in the unknown other. A number of previous studies have shown that trusters are also...... tolerant toward ethnic minority members. This article contributes to social trust research by examining the extent to which the relationship between social trust and tolerance toward ethnic minority members is conditioned by the preference for national cultural homogeneity. The empirical analysis shows...

Alcohol Ataxia Tolerance: Extinction Cues, Spontaneous Recovery, and Relapse

OpenAIRE

Brooks, Douglas C.

2005-01-01

This article reviews ethanol ataxic tolerance experiments with rats that investigate spontaneous recovery after extinction and how extinction-related cues reduce this recovery. Tolerance to the effects of many drugs including ethanol is partly the result of Pavlovian conditioning. Tolerance to the ataxic (and other) effects of ethanol depends critically upon the circumstances in which the drug is administered. Tolerance shows other characteristics common in Pavlovian conditioning, e.g.,. it c...

Tolerating extremism : to what extent should intolerance be tolerated?

NARCIS (Netherlands)

Guiora, Amos Neuser

2013-01-01

In discussing extremism, the key questions are: to whom is a duty owed and what are the limits of intolerance that are to be tolerated? Answering these questions requires examining limits and rights; analyzing them in the context of extremism is the ‘core’ of this book. While freedom of speech and

Physiological determinants of human acute hypoxia tolerance.

Science.gov (United States)

2013-11-01

AbstractIntroduction. We investigated possible physiological determinants of variability in hypoxia tolerance in subjects given a 5-minute normobaric exposure to 25,000 ft equivalent. Physiological tolerance to hypoxia was defined as the magnitude of...

Immune tolerance in radiation chimeras

International Nuclear Information System (INIS)

Awaya, Kazuhiko; Kuniki, Hiromichi; Neki, Miyuki

1978-01-01

Establishment of immune tolerance in radiation chimeras and the mechanism of maintaining it were discussed from certain points. Semiallogeneic radiation chimeras are mostly of long-living, and the hematopoietic organ of this individual consists mainly of the cells derived from the marrow donor, i. e., F 1 -type cells. F 1 -type lymphocytes can distinguish parental strain cells from themselves. In these chimeras, a F 1 -skin graft maintains to be fresh as long as the host is alive, showing immune tolerance effective through its life. In establishment and maintenance of this immune tolerance, the suppressing mechanism of host-type or F 1 -type seems to be involved. The allogeneic radiation chimera has very poor long-survival rate compared with that of the semiallogeneic radiation chimera. To raise this survival rate, efforts are now being made from the immunological point of view. (Ueda, J.)

Fault tolerant control design for hybrid systems

Energy Technology Data Exchange (ETDEWEB)

Yang, Hao; Jiang, Bin [Nanjing University of Aeronautics and Astronautics, Nanjing (China); Cocquempot, Vincent [Universite des Sciences et Technologies de Lille, Villeneuve d' Ascq (France)

2010-07-01

This book intends to provide the readers a good understanding on how to achieve Fault Tolerant Control goal of Hybrid Systems. The book can be used as a reference for the academic research on Fault Tolerant Control and Hybrid Systems or used in Ph.D. study of control theory and engineering. The knowledge background for this monograph would be some undergraduate and graduate courses on Fault Diagnosis and Fault Tolerant Control theory, linear system theory, nonlinear system theory, Hybrid Systems theory and Discrete Event System theory. (orig.)

A Need for Dialogue to Develop Tolerance

Directory of Open Access Journals (Sweden)

Corina Yoris-Villasana

2016-03-01

Full Text Available The authoress claims that civic education must be grounded in a deep sense of belonging, which, in turn, involves values such as freedom, equality, civility, justice, pluralism and, above all, ensures the development of dialogue and tolerance in the individual, dialogue and tolerance which are essential attributes of a democratic attitude. Tolerance and dialogue are the pivots of citizenship in a society which is to function peacefully. She concludes that by developing these values individuals can better participate in the pursuit of social ideals.

Limits of tolerance as a social phenomenon

Directory of Open Access Journals (Sweden)

Stepanenko Serhiy Ihorovych

2016-10-01

Full Text Available This article covers an insufficiently studied scientific and social topic; it seeks to make clear if there are any boundaries in terms of tolerance. The problem of tolerance has a pivotal role nowadays. Its significance can be explained by the existence of many factors: multiculturalism as the process of worsening of international relations, terrorism, the development of the religious extremism, the problems with refugees etc. In order to solve these issues, it is crucial to consider the essence and peculiarities of tolerance in society.

MicroRNAs are involved in cadmium tolerance in Daphnia pulex

Energy Technology Data Exchange (ETDEWEB)

Chen, Shuai [Department of Forestry and Natural Resources, Purdue University, West Lafayette, IN (United States); Nichols, Krista M. [Department of Forestry and Natural Resources, Purdue University, West Lafayette, IN (United States); Conservation Biology Division, Northwest Fisheries Science Center, National Marine Fisheries Service, National Ocean and Atmospheric Administration, Seattle, WA (United States); Poynton, Helen C. [School for the Environment, University of Massachusetts, Boston, MA (United States); Sepúlveda, Maria S., E-mail: mssepulv@purdue.edu [Department of Forestry and Natural Resources, Purdue University, West Lafayette, IN (United States)

2016-06-15

Highlights: • Cd tolerance in D. pulex was related with differential expression of 10 miRNAs and MT3 and MT4. • Cd tolerance-related miRNAs might switch cellular energy allocation to detoxification processes by suppressing cellular growth and proliferation. • Loss of Cd tolerance was linked to down-regulation of MT1 and MT3 expression when animals were moved to a Cd-free environment. • This is the first study linking aquatic invertebrate miRNAs with induced tolerance to environmental stressors. - Abstract: Daphnia can develop tolerance to cadmium (Cd) after multi-generational exposures. Until now, Cd tolerance in this crustacean was thought to be mainly due to its sequestration via induction of metallothioneins (MTs). Our research supports other studies showing microRNAs (miRNAs) also play a role in this enhanced tolerance. We induced Cd tolerance in Daphnia pulex after exposing them for 25 generations and examined the maintenance of enhanced Cd tolerance under a Cd-free environment for an additional three generations. Acute Cd tolerance as well as long-term effects on population dynamics were measured in selected generations via 48 h LC{sub 50} tests and 21 d reproductive tests, respectively. Cd tolerance was associated with differential expression of 10 miRNAs (miR-2, miR-33, miR-92, miR-96, miR-153, miR-252, miR-279, miR-283, miR-305 and miR-615). Pathway analysis revealed these miRNAs might increase Cd tolerance by suppressing cellular growth and proliferation by GTPase and cuticle protein pathways, which switch cellular energy allocation to detoxification processes. Moreover, we found increased Cd tolerance is related with induction of MT3 and MT4 and a subsequent downregulation of MT1 and MT3 expression when animals are moved to a Cd-free environment. This is the first study linking aquatic invertebrate miRNAs with induced tolerance to environmental stressors.

Tolerance to gamma radiation in the marine heterotardigrade, Echiniscoides sigismundi

DEFF Research Database (Denmark)

Jönsson, K. Ingemar; Hygum, Thomas Lunde; Andersen, Kasper Nørgaard

2016-01-01

Tardigrades belong to the most radiation tolerant animals on Earth, as documented by a number of studies using both low-LET and high-LET ionizing radiation. Previous studies have focused on semi-terrestrial species, which are also very tolerant to desiccation. The predominant view on the reason...... for the high radiation tolerance among these semi-terrestrial species is that it relies on molecular mechanisms that evolved as adaptations for surviving dehydration. In this study we report the first study on radiation tolerance in a marine tardigrade, Echiniscoides sigismundi. Adult specimens in the hydrated...... that have high tolerance to both desiccation and radiation, supporting the hypothesis that radiation tolerance is a by-product of adaptive mechanisms to survive desiccation. More studies on radiation tolerance in tardigrade species adapted to permanently wet conditions, both marine and freshwater...

On the methods for the estimation of salinity tolerance of ciliates

OpenAIRE

Smurov, Alexei

2000-01-01

Critical review of research methods for tolerance and potential tolerance of ciliates is given. Using several Paramecium species as an example the original approaches to potential tolerance estimation is presented. Connection between resistance, tolerance and potential tolerance is shown. Model for explanation of the connection is proposed. Several application aspects of diagrams of the connection between acclimation salinity and value of upper salinity tolerant limit in the ciliates are cons...

77 FR 60311 - Chlorantraniliprole; Pesticide Tolerances

Science.gov (United States)

2012-10-03

... sheep, fat to 0.5 ppm. EPA has also increased the existing tolerances in cattle, meat; goat, meat; horse..., horse and sheep, fat at 0.5 ppm, and cattle, goat, horse and sheep, meat at 0.1 ppm. Consistent with the.... Revise the tolerances for cattle, fat; cattle, meat; goat, fat; goat, meat; horse, fat; horse, meat...

Breaking Tolerance to Thyroid Antigens: Changing Concepts in Thyroid Autoimmunity

Science.gov (United States)

Rapoport, Basil

2014-01-01

Thyroid autoimmunity involves loss of tolerance to thyroid proteins in genetically susceptible individuals in association with environmental factors. In central tolerance, intrathymic autoantigen presentation deletes immature T cells with high affinity for autoantigen-derived peptides. Regulatory T cells provide an alternative mechanism to silence autoimmune T cells in the periphery. The TSH receptor (TSHR), thyroid peroxidase (TPO), and thyroglobulin (Tg) have unusual properties (“immunogenicity”) that contribute to breaking tolerance, including size, abundance, membrane association, glycosylation, and polymorphisms. Insight into loss of tolerance to thyroid proteins comes from spontaneous and induced animal models: 1) intrathymic expression controls self-tolerance to the TSHR, not TPO or Tg; 2) regulatory T cells are not involved in TSHR self-tolerance and instead control the balance between Graves' disease and thyroiditis; 3) breaking TSHR tolerance involves contributions from major histocompatibility complex molecules (humans and induced mouse models), TSHR polymorphism(s) (humans), and alternative splicing (mice); 4) loss of tolerance to Tg before TPO indicates that greater Tg immunogenicity vs TPO dominates central tolerance expectations; 5) tolerance is induced by thyroid autoantigen administration before autoimmunity is established; 6) interferon-α therapy for hepatitis C infection enhances thyroid autoimmunity in patients with intact immunity; Graves' disease developing after T-cell depletion reflects reconstitution autoimmunity; and 7) most environmental factors (including excess iodine) “reveal,” but do not induce, thyroid autoimmunity. Micro-organisms likely exert their effects via bystander stimulation. Finally, no single mechanism explains the loss of tolerance to thyroid proteins. The goal of inducing self-tolerance to prevent autoimmune thyroid disease will require accurate prediction of at-risk individuals together with an antigen

Screening cotton genotypes for seedling drought tolerance

Directory of Open Access Journals (Sweden)

Penna Julio C. Viglioni

1998-01-01

Full Text Available The objectives of this study were to adapt a screening method previously used to assess seedling drought tolerance in cereals for use in cotton (Gossypium hirsutum L. and to identify tolerant accessions among a wide range of genotypes. Ninety genotypes were screened in seven growth chamber experiments. Fifteen-day-old seedlings were subjected to four 4-day drought cycles, and plant survival was evaluated after each cycle. Three cycles are probably the minimum required in cotton work. Significant differences (at the 0.05 level or lower among entries were obtained in four of the seven experiments. A "confirmation test" with entries previously evaluated as "tolerant" (high survival and "susceptible" (low survival was run. A number of entries duplicated their earlier performance, but others did not, which indicates the need to reevaluate selections. Germplasms considered tolerant included: `IAC-13-1', `IAC-RM4-SM5', `Minas Sertaneja', `Acala 1517E-1' and `4521'. In general, the technique is simple, though time-consuming, with practical value for screening a large number of genotypes. Results from the screening tests generally agreed with field information. The screening procedure is suitable to select tolerant accessions from among a large number of entries in germplasm collections as a preliminary step in breeding for drought tolerance. This research also demonstrated the need to characterize the internal lack of uniformity in growth chambers to allow for adequate designs of experiments.

A Nucleocytoplasmic Shuttling Protein in Oxidative Stress Tolerance

Energy Technology Data Exchange (ETDEWEB)

Ow, David W.; Song, Wen

2003-03-26

Plants for effective extraction of toxic metals and radionuclides must tolerate oxidative stress. To identify genes that enhance oxidative stress tolerance, an S. pombe cDNA expression plasmid library was screened for the ability to yield hypertolerant colonies. Here, we report on the properties of one gene that confers hypertolerance to cadmium and oxidizing chemicals. This gene appears to be conserved in other organisms as homologous genes are found in human, mouse, fruitfly and Arabidopsis. The fruitfly and Arabidopsis genes likewise enhance oxidative stress tolerance in fission yeast. During oxidative stress, the amount of mRNA does not change, but protein fusions to GFP relocate from the cytoplasm to the nucleus. The same pattern is observed with the Arabidopsis homologue-GFP fusion protein. This behavior suggests a signaling role in oxidative stress tolerance and these conserved proteins may be targets for engineering stress tolerant plants for phytoremediation.

Spinoza and the Theory of Active Tolerance

DEFF Research Database (Denmark)

Tønder, Lars

2013-01-01

This paper considers the politics of tolerance through the lens of Spinoza’s philosophy of immanence. The contention is that Spinoza’s philosophy of immanence provides us with a better conceptualization of the relationship between tolerance and power, and that it in so doing reinvigorates a theory...... of active tolerance that, for the most part, has been lost in contemporary democratic theory. Spinoza’s philosophy of immanence does so because it animates a sensorial orientation to politics, one that heightens our attention to the affective components of political life, enabling us to better theorize how...... all modes of existence, including the so-called passive ones, harbor a degree of power that can be mobilized for purposes that go beyond the “non-practice” highlighted by advocates and critics of tolerance in contemporary democratic theory. The paper develops this argument with ongoing reference...

40 CFR 180.473 - Glufosinate ammonium; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Glufosinate ammonium; tolerances for... § 180.473 Glufosinate ammonium; tolerances for residues. (a) General. Tolerances are established for residues of the herbicide glufosinate-ammonium (butanoic acid, 2-amino-4-(hydroxymethylphosphinyl...

SCHEME ANALYSIS TREE DIMENSIONS AND TOLERANCES PROCESSING

Directory of Open Access Journals (Sweden)

Constanta RADULESCU

2011-07-01

Full Text Available This paper presents one of the steps that help us to determine the optimal tolerances depending on thetechnological capability of processing equipment. To determine the tolerances in this way is necessary to takethe study and to represent schematically the operations are used in technological process of making a piece.Also in this phase will make the tree diagram of the dimensions and machining tolerances, dimensions andtolerances shown that the design execution. Determination processes, and operations of the dimensions andtolerances tree scheme will make for a machined piece is both indoor and outdoor.

Exploring new alleles for frost tolerance in winter rye.

Science.gov (United States)

Erath, Wiltrud; Bauer, Eva; Fowler, D Brian; Gordillo, Andres; Korzun, Viktor; Ponomareva, Mira; Schmidt, Malthe; Schmiedchen, Brigitta; Wilde, Peer; Schön, Chris-Carolin

2017-10-01

Rye genetic resources provide a valuable source of new alleles for the improvement of frost tolerance in rye breeding programs. Frost tolerance is a must-have trait for winter cereal production in northern and continental cropping areas. Genetic resources should harbor promising alleles for the improvement of frost tolerance of winter rye elite lines. For frost tolerance breeding, the identification of quantitative trait loci (QTL) and the choice of optimum genome-based selection methods are essential. We identified genomic regions involved in frost tolerance of winter rye by QTL mapping in a biparental population derived from a highly frost tolerant selection from the Canadian cultivar Puma and the European elite line Lo157. Lines per se and their testcrosses were phenotyped in a controlled freeze test and in multi-location field trials in Russia and Canada. Three QTL on chromosomes 4R, 5R, and 7R were consistently detected across environments. The QTL on 5R is congruent with the genomic region harboring the Frost resistance locus 2 (Fr-2) in Triticeae. The Puma allele at the Fr-R2 locus was found to significantly increase frost tolerance. A comparison of predictive ability obtained from the QTL-based model with different whole-genome prediction models revealed that besides a few large, also small QTL effects contribute to the genomic variance of frost tolerance in rye. Genomic prediction models assigning a high weight to the Fr-R2 locus allow increasing the selection intensity for frost tolerance by genome-based pre-selection of promising candidates.

Application of computer aided tolerance analysis in product design

International Nuclear Information System (INIS)

Du Hua

2009-01-01

This paper introduces the shortage of the traditional tolerance design method and the strong point of the computer aided tolerancing (CAT) method,compares the shortage and the strong point among the three tolerance analysis methods, which are Worst Case Analysis, Statistical Analysis and Monte-Carlo Simulation Analysis, and offers the basic courses and correlative details for CAT. As the study objects, the reactor pressure vessel, the core barrel, the hold-down barrel and the support plate are used to upbuild the tolerance simulation model, based on their 3D design models. Then the tolerance simulation analysis has been conducted and the scheme of the tolerance distribution is optimized based on the analysis results. (authors)

Persistence and drug tolerance in pathogenic yeast

DEFF Research Database (Denmark)

Bojsen, Rasmus Kenneth; Regenberg, Birgitte; Folkesson, Sven Anders

2017-01-01

In this review, we briefly summarize the current understanding of how fungal pathogens can persist antifungal treatment without heritable resistance mutations by forming tolerant persister cells. Fungal infections tolerant to antifungal treatment have become a major medical problem. One mechanism...

Genetic studies towards elucidation of drought tolerance of potato

NARCIS (Netherlands)

Tessema, Biructa Bekele

2017-01-01

Drought is a major threat to agricultural production, which makes drought tolerance a prime target for breeding approaches towards crop improvement. Drought is a complex polygenic trait and poses a challenge for drought tolerance breeding. Improving crops for drought tolerance at least requires

Reversal of oxycodone and hydrocodone tolerance by diazepam.

Science.gov (United States)

Gonek, Maciej; Akbarali, Hamid I; Henderson, Graeme; Dewey, William L

2017-11-01

The Centers for Disease Control has declared opioid abuse to be an epidemic. Overdose deaths are largely assumed to be the result of excessive opioid consumption. In many of these cases, however, opioid abusers are often polydrug abusers. Benzodiazepines are one of the most commonly co-abused substances and pose a significant risk to opioid users. In 2016, the FDA required boxed warnings - the FDA's strongest warning - for prescription opioid analgesics and benzodiazepines about the serious risks associated with using these medications at the same time. The point of our studies was to evaluate the interactions between these two classes of drugs. We investigated whether diazepam adds to the depressant effects of opioids or do they alter the levels of tolerance to opioids. In the present study, we have found that the antinociceptive tolerance that developed to repeated administration of oxycodone was reversed by an acute dose of diazepam. Antinociceptive tolerance to hydrocodone was also reversed by acute injection of diazepam; however, a fourfold higher dose of diazepam was required when compared to reversal of oxycodone-induced tolerance. These doses of diazepam did not potentiate the acute antinociceptive effect of either opioid. The same dose of diazepam that reversed oxycodone antinociceptive tolerance also reversed oxycodone locomotor tolerance while having no potentiating effects. These studies show that diazepam does not potentiate the acute effect of prescription opioids but reverses the tolerance developed after chronic administration of the drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

Tolerance analyses of a quadrupole magnet for advanced photon source upgrade

Energy Technology Data Exchange (ETDEWEB)

Liu, J., E-mail: Jieliu@aps.anl.gov; Jaski, M., E-mail: jaski@aps.anl.gov; Borland, M., E-mail: borland@aps.anl.gov [Advanced Photon Source, Argonne National Laboratory, 9700 S. Cass Avenue, Lemont, IL60439 (United States); Jain, A., E-mail: jain@bnl.gov [Superconducting Magnet Division, Brookhaven National Laboratory, P.O. Box 5000. Upton, NY 11973-5000 (United States)

2016-07-27

Given physics requirements, the mechanical fabrication and assembly tolerances for storage ring magnets can be calculated using analytical methods [1, 2]. However, this method is not easy for complicated magnet designs [1]. In this paper, a novel method is proposed to determine fabrication and assembly tolerances consistent with physics requirements, through a combination of magnetic and mechanical tolerance analyses. In this study, finite element analysis using OPERA is conducted to estimate the effect of fabrication and assembly errors on the magnetic field of a quadrupole magnet and to determine the allowable tolerances to achieve the specified magnetic performances. Based on the study, allowable fabrication and assembly tolerances for the quadrupole assembly are specified for the mechanical design of the quadrupole magnet. Next, to achieve the required assembly level tolerances, mechanical tolerance stackup analyses using a 3D tolerance analysis package are carried out to determine the part and subassembly level fabrication tolerances. This method can be used to determine the tolerances for design of other individual magnets and of magnet strings.

Tolerance analyses of a quadrupole magnet for advanced photon source upgrade

International Nuclear Information System (INIS)

Liu, J.; Jaski, M.; Borland, M.; Jain, A.

2016-01-01

Given physics requirements, the mechanical fabrication and assembly tolerances for storage ring magnets can be calculated using analytical methods [1, 2]. However, this method is not easy for complicated magnet designs [1]. In this paper, a novel method is proposed to determine fabrication and assembly tolerances consistent with physics requirements, through a combination of magnetic and mechanical tolerance analyses. In this study, finite element analysis using OPERA is conducted to estimate the effect of fabrication and assembly errors on the magnetic field of a quadrupole magnet and to determine the allowable tolerances to achieve the specified magnetic performances. Based on the study, allowable fabrication and assembly tolerances for the quadrupole assembly are specified for the mechanical design of the quadrupole magnet. Next, to achieve the required assembly level tolerances, mechanical tolerance stackup analyses using a 3D tolerance analysis package are carried out to determine the part and subassembly level fabrication tolerances. This method can be used to determine the tolerances for design of other individual magnets and of magnet strings.

Comparing Tolerance of Ambiguity in Veterinary and Medical Students.

Science.gov (United States)

Hancock, Jason; Hammond, Jennifer A; Roberts, Martin; Mattick, Karen

Current guidelines suggest that educators in both medical and veterinary professions should do more to ensure that students can tolerate ambiguity. Designing curricula to achieve this requires the ability to measure and understand differences in ambiguity tolerance among and within professional groups. Although scales have been developed to measure tolerance of ambiguity in both medical and veterinary professions, no comparative studies have been reported. We compared the tolerance of ambiguity of medical and veterinary students, hypothesizing that veterinary students would have higher tolerance of ambiguity, given the greater patient diversity and less well-established evidence base underpinning practice. We conducted a secondary analysis of questionnaire data from first- to fourth-year medical and veterinary students. Tolerance of ambiguity scores were calculated and compared using the TAMSAD scale (29 items validated for the medical student population), the TAVS scale (27 items validated for the veterinary student population), and a scale comprising the 22 items common to both scales. Using the TAMSAD and TAVS scales, medical students had a significantly higher mean tolerance of ambiguity score than veterinary students (56.1 vs. 54.1, pambiguity than veterinary students, although this depends on the scale used.

A Religious Tolerance and Harmony the Qur'anic Perspective

Directory of Open Access Journals (Sweden)

Choirul Fuad Yusuf

2016-01-01

Full Text Available The religious tolerance and harmony is something necessary to develop due to the need of global security and peace today. For this purpose, all religions have to be fairly “tolerant” to others. Islam as a revealed religion, whatever its motive, is often perceived and accused as the religion of intolerance and violence. Some political and ideological questions, for example raised to this context: "Can Islamic faith tolerate other faiths, religions or groups?”, What’s actually the Islamic teachings on tolerance and peace or harmony?” and the likes. This article attempts to unpack and elaborate of how far at Qur’an –as the first and primary source of Islam– has a teaching on tolerance and peace. Using a hermeneutical approach the writer understands and analyses what is actually taught by al Qur'an on the concepts and practices of the tolerance. Based on the analysis, he highlights any conclusions of which al-Qur’an (Islam teaches the followers to respect and implement the doctrine of tolerance and peace. The Muslim world is imperatively to tolerate others, or respect the differences for strengthening the world security and peaceful life amongst nationwide.

Reassessment of data used in setting exposure limits for hot particles

International Nuclear Information System (INIS)

Baum, J.W.; Kaurin, D.G.

1991-05-01

A critical review and a reassessment of data reviewed in NCRP Report 106 on effects of ''hot particles'' on the skin of pigs, monkeys, and humans were made. Our analysis of the data of Forbes and Mikhail on effects from activated UC 2 particles, ranging in diameter from 144 μm to 328 μm, led to the formulation of a new model for prediction of both the threshold for acute ulceration and for ulcer diameter. A dose of 27 Gy at a depth of 1.33 mm in tissue in this model will result in an acute ulcer with a diameter determined by the radius over which this dose (at 1.33-mm depth) extends. Application of the model to the Forbes-Mikhail data yielded a ''threshold'' (5% probability) of 6 x 10 9 beta particles from a point source on skin of mixed fission product beta particles, or about 10 10 beta particles from Sr--Y-90, since few of the Sr-90 beta particles reach this depth. The data of Hopewell et al. for their 1 mm Sr-Y-90 exposures were also analyzed with the above model and yielded a predicted threshold of 2 x 10 10 Sr-Y-90 beta particles for a point source on skin. Dosimetry values were employed in this latter analysis that are 3.3 times higher than previously reported for this source. An alternate interpretation of the Forbes and Mikhail data, derived from linear plots of the data, is that the threshold depends strongly on particle size with the smaller particles yielding a much lower threshold and smaller minimum size ulcer. Additional animal exposures are planned to distinguish between the above explanations. 17 refs., 3 figs., 3 tabs

Examining language functions: a reassessment of Bastian's contribution to aphasia assessment.

Science.gov (United States)

Lorch, Marjorie P

2013-08-01

Henry Charlton Bastian (1837-1915) developed his network model of language processing, modality deficits and correlated lesion localizations in the 1860s and was a leading clinical authority for over four decades. Although his ideas are little referenced today, having been overshadowed by his more eminent Queen Square colleague John Hughlings Jackson, his work on aphasia and paralysis was highly regarded by contemporaries. This paper traces Bastian's lasting but largely unattributed contribution to the development of standardized clinical assessment of language disorders. From 1867 onwards, Bastian trained generations of medical students in neurology. In his 1875 book On Paralysis there is evidence in his case descriptions that Bastian had already implemented a detailed set of procedures for examining aphasic patients. In 1886, Bastian published a 'Schema for the Examination of Aphasic and Amnesic Persons'. Bastian insisted on the utility of this battery for diagnosis, classification and lesion localization; he argued that its consistent use would allow the development of a patient corpus and the comparison of cases from other hospitals. In 1898 his Treatise on Aphasia included a list of 34 questions that were to be used to examine all patients to provide detailed and systematic evidence of spared and impaired abilities in all receptive and expressive modalities. Bastian's contribution to the development of standardized clinical aphasia assessment is reassessed through detailed analysis of his publications and those of his contemporaries as well as new material from archives and casebooks. This evidence demonstrates that his approach to diagnosis of language and other cognitive impairments has propagated through the decades. His legacy can be seen in the approach to standardized aphasia testing developed in the latter 20th century through to today.

Transplantation Tolerance Induction: Cell Therapies and their Mechanisms

Directory of Open Access Journals (Sweden)

Joseph R Scalea

2016-03-01

Full Text Available Cell based therapies have been studied extensively in the context of transplantation tolerance induction. The most successful protocols have relied on transfusion of bone marrow prior to the transplantation of a renal allograft. However, it is not clear that stem cells found in bone marrow are required in order to render a transplant candidate immunologically tolerant. Accordingly, mesenchymal stem cells, regulatory myeloid cells, T regulatory cells, and other cell types, are being tested as possible routes to tolerance induction, in the absence of donor derived stem cells. Early data with each of these cell types have been encouraging. However, the induction regimen capable of achieving consistent tolerance, whilst avoiding unwanted sided effects, and which is scalable to the human patient, has yet to be identified. Here we present the status of investigations of various tolerogenic cell types and the mechanistic rationale for their use in in tolerance induction protocols.

40 CFR 180.151 - Ethylene oxide; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Ethylene oxide; tolerances for... § 180.151 Ethylene oxide; tolerances for residues. (a) General. (1) Tolerances are established for residues of the antimicrobial agent and insecticide ethylene oxide, when used as a postharvest fumigant in...

40 CFR 180.130 - Hydrogen Cyanide; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Hydrogen Cyanide; tolerances for... § 180.130 Hydrogen Cyanide; tolerances for residues. (a) General. A tolerance for residues of the insecticide hydrogen cyanide from postharvest fumigation as a result of application of sodium cyanide is...

More diversity, less tolerance? The effect of type of cultural diversity on the erosion of tolerance in Swiss municipalities

DEFF Research Database (Denmark)

Rapp, Carolin

2015-01-01

Immigration and the ways in which host societies receive newcomers pose challenges for modern civil societies. This article contributes to the ongoing discussion about how ethnic diversity influences tolerance towards immigrants. Compared to previous studies, we analyse tolerance as a sequential ...

TRX-4 (TolerRx Inc).

Science.gov (United States)

Brown, William M

2006-04-01

TolerRx Inc, under license from BTG plc, is developing TRX-4, an anti-CD3 humanized monoclonal antibody for the potential treatment of type 1 diabetes and psoriasis. Phase II trials of the therapeutic antibody in type 1 diabetes have been completed and the company is planning a pivotal phase III trial for this indication. TolerRx is also enrolling psoriasis patients in a phase Ib clinical study of TRX-4. TRX-4 has been awarded Orphan Drug status for recent-onset type 1 diabetes.

Methods to establish flaw tolerances

International Nuclear Information System (INIS)

Varga, T.

1978-01-01

Three conventional methods used to establish flaw tolerances are compared with new approaches using fracture mechanics. The conventional methods are those based on (a) non-destructive testing methods; (b) fabrication and quality assurance experience; and (c) service and damage experience. Pre-requisites of fracture mechanics methods are outlined, and summaries given of linear elastic mechanics (LEFM) and elastoplastic fracture mechanics (EPFM). The latter includes discussion of C.O.D.(crack opening displacement), the J-integral and equivalent energy. Proposals are made for establishing flaw tolerances. (U.K.)

Improvement of ethanol-tolerance of haploid Saccharomyces diastaticus

International Nuclear Information System (INIS)

Song, S.H.; Kim, K.; Lee, M.W.

1994-01-01

Several mutation procedures have been compared to obtain an ethanol-tolerant Saccharomyces diastaticus strain secreting glucoamylase. These procedures include spontaneous mutation, EMS treatment, UV irradiation, and combination of EMS treatment and UV irradiation. All these methods were followed by adaptation of the yeast cells to gradually higher ethanol concentration. Among these procedures, the combined method of EMS treatment and UV irradiation gave the promising result, i.e. the ethanol tolerance of the yeast increased from 11.5%(v/v) to 14.0%(v/v). Respiratory deficient petite mutants of industrial and ethanol-tolerant yeast strains have been isolated and hybridized with haploid S. diastaticus strains. The resulting hybrids showed increased ethanol tolerance and starch-fermentability

Organic Solvent Tolerant Lipases and Applications

Directory of Open Access Journals (Sweden)

Shivika Sharma

2014-01-01

Full Text Available Lipases are a group of enzymes naturally endowed with the property of performing reactions in aqueous as well as organic solvents. The esterification reactions using lipase(s could be performed in water-restricted organic media as organic solvent(s not only improve(s the solubility of substrate and reactant in reaction mixture but also permit(s the reaction in the reverse direction, and often it is easy to recover the product in organic phase in two-phase equilibrium systems. The use of organic solvent tolerant lipase in organic media has exhibited many advantages: increased activity and stability, regiospecificity and stereoselectivity, higher solubility of substrate, ease of products recovery, and ability to shift the reaction equilibrium toward synthetic direction. Therefore the search for organic solvent tolerant enzymes has been an extensive area of research. A variety of fatty acid esters are now being produced commercially using immobilized lipase in nonaqueous solvents. This review describes the organic tolerance and industrial application of lipases. The main emphasis is to study the nature of organic solvent tolerant lipases. Also, the potential industrial applications that make lipases the biocatalysts of choice for the present and future have been presented.

Decrement in operant performance produced by NMDA receptor antagonists in the rat: tolerance and cross-tolerance.

Science.gov (United States)

Dravolina, O A; Zvartau, E E; Bespalov, A Y

2000-04-01

Current perspectives on the clinical use of NMDA receptor antagonists infer repeated administration schedules for the management of different pathological states. The development of tolerance and cross-tolerance between different NMDA receptor antagonists may be an important factor contributing to the clinical efficacy of these drugs. The present study aimed to characterize the development of tolerance and cross-tolerance to the ability of various site-selective NMDA receptor antagonists to produce a decrement of operant responding (multiple extinction 9 s fixed-interval 1-s schedule of water reinforcement). Acute administration of D-CPPen (SDZ EAA 494; 1-5.6 mg/kg), dizocilpine (MK-801; 0.03-0.3 mg/kg), memantine (0.3-17 mg/kg), ACEA-1021 (10-56 mg/kg), and eliprodil (1-30 mg/kg) differentially affected operant responding. Both increases and decreases in response rates and accuracy of responding were observed. Repeated preexposure to D-CPPen (5.6 mg/kg, once a day for 7 days) attenuated a behavioral disruption produced by an acute challenge with D-CPPen or ACEA-1021, but potentiated the effects of dizocilpine, memantine, and eliprodil. Based on the present results, one can suggest that the repeated administration of a competitive NMDA receptor antagonist differentially affects the functional activity of various sites on NMDA receptor complex.

40 CFR 180.444 - Sulfur dioxide; tolerances for residues.

Science.gov (United States)

2010-07-01

... § 180.444 Sulfur dioxide; tolerances for residues. A tolerance is established as follows for sulfite residues of the fungicide sulfur dioxide (determined as (SO2)) in or on the following raw agricultural... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Sulfur dioxide; tolerances for...

Antioxidant Defense Mechanisms of Salinity Tolerance in Rice Genotypes

Directory of Open Access Journals (Sweden)

Mohammad Golam Kibria

2017-05-01

Full Text Available In order to elucidate the role of antioxidant responses in salinity tolerance in rice genotypes under salt stress, experiments were conducted using four rice varieties, including salt-sensitive BRRI dhan 28 and three salt-tolerant varieties BRRI dhan 47, BINA dhan 8 and BINA dhan 10. Thirty-day-old rice seedlings were transplanted into pots. At the active tillering stage (35 d after transplanting, plants were exposed to different salinity levels (0, 20, 40 and 60 mmol/L NaCl. Salt stress caused a significant reduction in growth for all the rice genotypes. Growth reduction was higher in the salt-sensitive genotype than in the salt-tolerant ones, and BINA dhan 10 showed higher salt tolerance in all measured physiological parameters. The reduction in shoot and root biomass was found to be minimal in BINA dhan 10. Chlorophyll content significantly decreased under salt stress except for BINA dhan 10. Proline content significantly increased in salt-tolerant rice genotypes with increased salt concentration, and the highest proline content was obtained from BINA dhan 10 under salt stress. Catalase and ascorbate peroxidase activities significantly decreased in salt-sensitive genotype whereas significantly increased in salt-tolerant ones with increasing salt concentration. However, salt stress significantly decreased guaiacol peroxidase activity in all the rice genotypes irrespective of salt tolerance. K+/Na+ ratio also significantly decreased in shoots and roots of all the rice genotypes. The salt-tolerant genotype BINA dhan 10 maintained higher levels of chlorophyll and proline contents as well as catalase and ascorbate peroxidase activities under salt stress, thus, this might be the underlying mechanism for salt tolerance.

Transcriptome Analysis of Sunflower Genotypes with Contrasting Oxidative Stress Tolerance Reveals Individual- and Combined- Biotic and Abiotic Stress Tolerance Mechanisms.

Directory of Open Access Journals (Sweden)

Vemanna S Ramu

Full Text Available In nature plants are often simultaneously challenged by different biotic and abiotic stresses. Although the mechanisms underlying plant responses against single stress have been studied considerably, plant tolerance mechanisms under combined stress is not understood. Also, the mechanism used to combat independently and sequentially occurring many number of biotic and abiotic stresses has also not systematically studied. From this context, in this study, we attempted to explore the shared response of sunflower plants to many independent stresses by using meta-analysis of publically available transcriptome data and transcript profiling by quantitative PCR. Further, we have also analyzed the possible role of the genes so identified in contributing to combined stress tolerance. Meta-analysis of transcriptomic data from many abiotic and biotic stresses indicated the common representation of oxidative stress responsive genes. Further, menadione-mediated oxidative stress in sunflower seedlings showed similar pattern of changes in the oxidative stress related genes. Based on this a large scale screening of 55 sunflower genotypes was performed under menadione stress and those contrasting in oxidative stress tolerance were identified. Further to confirm the role of genes identified in individual and combined stress tolerance the contrasting genotypes were individually and simultaneously challenged with few abiotic and biotic stresses. The tolerant hybrid showed reduced levels of stress damage both under combined stress and few independent stresses. Transcript profiling of the genes identified from meta-analysis in the tolerant hybrid also indicated that the selected genes were up-regulated under individual and combined stresses. Our results indicate that menadione-based screening can identify genotypes not only tolerant to multiple number of individual biotic and abiotic stresses, but also the combined stresses.

Fault tolerant controllers for sampled-data systems

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Stoustrup, Jakob

2004-01-01

A general compensator architecture for fault tolerant control (FTC) for sampled-data systems is proposed. The architecture is based on the YJBK parameterization of all stabilizing controllers, and uses the dual YJBK parameterization to quantify the performance of the fault tolerant system. The FTC...

Fault Tolerant Control: A Simultaneous Stabilization Result

DEFF Research Database (Denmark)

Stoustrup, Jakob; Blondel, V.D.

2004-01-01

This paper discusses the problem of designing fault tolerant compensators that stabilize a given system both in the nominal situation, as well as in the situation where one of the sensors or one of the actuators has failed. It is shown that such compensators always exist, provided that the system...... is detectable from each output and that it is stabilizable. The proof of this result is constructive, and a worked example shows how to design a fault tolerant compensator for a simple, yet challeging system. A family of second order systems is described that requires fault tolerant compensators of arbitrarily...

Psychological aspects of political tolerance among adolescents.

Science.gov (United States)

Sotelo, M J; Sangrador, J L

1997-12-01

This study concerns 273 Spanish adolescents, aged between 14 and 17, 125 boys and 148 girls. The measured variables were political tolerance, liking for several groups, political experience, cognitive moral reasoning, support for democratic norms, support for violent groups, identification with a group of friends, identification with a religious group, and identification with a soccer team. The objectives of this work were (a) to establish groups of adolescents based on the relationship between their willingness to extend rights to several groups and their liking of these groups, (b) to know the personality characteristics of tolerant and intolerant adolescents, and (c) to set up correlations between age and total tolerance, total liking, and the variables correlated with tolerance. The main findings are that older and younger adolescents belong to different groups, with respect to tolerance, and something similar can be said about boys and girls. Intolerant adolescents perceive themselves as anxious, insecure, solitary, and obstinate. Significant positive correlations between age and political experience, rated support for democratic norms and ratings for identification with a group of friends were found. On the contrary, there were significant negative correlations between age and rated support for violent groups, identification with a religious group, and identification with a soccer team.

Genetic Approaches to Develop Salt Tolerant Germplasm

KAUST Repository

Tester, Mark A.

2015-08-19

Forty percent of the world\\'s food is produced under irrigation, and this is directly threatened by over-exploitation and changes in the global environment. One way to address this threat is to develop systems for increasing our ability to use lower quality water, in particular saline water. Low cost partial desalination of brackish water, use of saline water for cooling and increases in the salinity tolerance of crops can all contribute to the development of this new agricultural system. In this talk, the focus will be on the use of forward genetic approaches for discovery of genes related to salinity tolerance in barley and tomatoes. Rather than studying salinity tolerance as a trait in itself, we dissect salinity tolerance into a series of components that are hypothesised to contribute to overall salinity tolerance (following the paradigm of Munns & Tester, 2008). For example, one significant component of tolerance of most crop plants to moderate soil salinity is due to the ability to maintain low concentrations of Na+ in the leaves, and much analysis of this aspect has been done (e.g. Roy et al., 2013, 2014). A major site for the control of shoot Na+ accumulation is at the plasma membrane of the mature stele of the root. Alleles of HKT, a major gene underlying this transport process have been characterized and, in work led by Dr Rana Munns (CSIRO), have now been introgressed into commercial durum wheat and led to significantly increased yields in saline field conditions (Munns et al., 2012). The genotyping of mapping populations is now highly efficient. However, the ability to quantitatively phenotype these populations is now commonly limiting forward progress in plant science. The increasing power of digital imaging and computational technologies offers the opportunity to relieve this phenotyping bottleneck. The Plant Accelerator is a 4500m2 growth facility that provides non-destructive phenotyping of large populations of plants (http

A Fault Tolerant Integrated Circuit Memory

OpenAIRE

Barton, Anthony Francis

1980-01-01

Most commercially produced integrated circuits are incapable of tolerating manufacturing defects. The area and function of the circuits is thus limited by the probability of faults occurring within the circuit. This thesis examines techniques for using redundancy in memory circuits to provide fault tolerance and to increase storage capacity. A hierarchical memory architecture using multiple Hamming codes is introduced and analysed to determine its resistance to manufa...

Selection and characterization of glyphosate tolerance in birdsfoot trefoil (Lotus corniculatus)

International Nuclear Information System (INIS)

Boerboom, C.M.

1989-01-01

If birdsfoot trefoil (Lotus corniculatus L.) was tolerant to glyphosate [N-(phosphonomethyl)glycine], Canada thistle [Cirsium arvense (L.) Scop.] and other dicot weeds could be selectively controlled in certified seed production fields. Glyphosate tolerance in birdsfoot trefoil was identified in plants from the cultivar Leo, plants regenerated from tolerant callus, and selfed progeny of plants regenerated from callus. Plants from the three sources were evaluated in field studies for tolerance to glyphosate at rates up to 1.6 kg ae/ha. Plants of Leo selected for tolerance exhibited a twofold range in the rate required to reduce shoot weight 50% (I 50 s from 0.6 to 1.2 kg/ha glyphosate). Plants regenerated from tolerant callus had tolerance up to 66% greater than plants regenerated from unselected callus. Transgressive segregation for glyphosate tolerance was observed in the selfed progeny of two regenerated plants that both had I 50 s of 0.7 kg/ha glyphosate. The selfed progeny ranged from highly tolerant (I 50 of 1.5 kg/ha) to susceptible (I 50 of 0.5 kg/ha). Spray retention, 14 C-glyphosate absorption and translocation did not account for the differential tolerance of nine plants that were evaluated from the three sources. The specific activity of 5-enolpyruvylshikimate 3-phosphate (EPSP) synthase ranged from 1.3 to 3.5 nmol/min sm-bullet mg among the nine plants and was positively correlated with glyphosate tolerance. Leo birdsfoot trefoil was found to have significant variation in glyphosate tolerance which made it possible to initiate a recurrent selection program to select for glyphosate tolerance in birdsfoot trefoil. Two cycles of selection for glyphosate tolerance were practiced in three birdsfoot trefoil populations, Leo, Norcen, and MU-81

Network Candidate Genes in Breeding for Drought Tolerant Crops

Directory of Open Access Journals (Sweden)

Christoph Tim Krannich

2015-07-01

Full Text Available Climate change leading to increased periods of low water availability as well as increasing demands for food in the coming years makes breeding for drought tolerant crops a high priority. Plants have developed diverse strategies and mechanisms to survive drought stress. However, most of these represent drought escape or avoidance strategies like early flowering or low stomatal conductance that are not applicable in breeding for crops with high yields under drought conditions. Even though a great deal of research is ongoing, especially in cereals, in this regard, not all mechanisms involved in drought tolerance are yet understood. The identification of candidate genes for drought tolerance that have a high potential to be used for breeding drought tolerant crops represents a challenge. Breeding for drought tolerant crops has to focus on acceptable yields under water-limited conditions and not on survival. However, as more and more knowledge about the complex networks and the cross talk during drought is available, more options are revealed. In addition, it has to be considered that conditioning a crop for drought tolerance might require the production of metabolites and might cost the plants energy and resources that cannot be used in terms of yield. Recent research indicates that yield penalty exists and efficient breeding for drought tolerant crops with acceptable yields under well-watered and drought conditions might require uncoupling yield penalty from drought tolerance.

Molecular markers associated with aluminium tolerance in Sorghum bicolor.

Science.gov (United States)

Too, Emily Jepkosgei; Onkware, Augustino Osoro; Were, Beatrice Ang'iyo; Gudu, Samuel; Carlsson, Anders; Geleta, Mulatu

2018-01-01

Sorghum ( Sorghum bicolor , L. Moench) production in many agro-ecologies is constrained by a variety of stresses, including high levels of aluminium (Al) commonly found in acid soils. Therefore, for such soils, growing Al tolerant cultivars is imperative for high productivity. In this study, molecular markers associated with Al tolerance were identified using a mapping population developed by crossing two contrasting genotypes for this trait. Four SSR ( Xtxp34 , Sb5_236 , Sb6_34 , and Sb6_342 ), one STS ( CTG29_3b ) and three ISSR ( 811_1400 , 835_200 and 884_200 ) markers produced alleles that showed significant association with Al tolerance. CTG29_3b, 811_1400 , Xtxp34 and Sb5_ 236 are located on chromosome 3 with the first two markers located close to Alt SB , a locus that underlie the Al tolerance gene ( SbMATE ) implying that their association with Al tolerance is due to their linkage to this gene. Although CTG29_3b and 811_ 1400 are located closer to Alt SB , Xtxp34 and Sb5_236 explained higher phenotypic variance of Al tolerance indices. Markers 835_200 , 884_200 , Sb6_34 and Sb6_342 are located on different chromosomes, which implies the presence of several genes involved in Al tolerance in addition to S bMATE in sorghum. These molecular markers have a high potential for use in breeding for Al tolerance in sorghum.

What does fault tolerant Deep Learning need from MPI?

Energy Technology Data Exchange (ETDEWEB)

Amatya, Vinay C.; Vishnu, Abhinav; Siegel, Charles M.; Daily, Jeffrey A.

2017-09-25

Deep Learning (DL) algorithms have become the {\\em de facto} Machine Learning (ML) algorithm for large scale data analysis. DL algorithms are computationally expensive -- even distributed DL implementations which use MPI require days of training (model learning) time on commonly studied datasets. Long running DL applications become susceptible to faults -- requiring development of a fault tolerant system infrastructure, in addition to fault tolerant DL algorithms. This raises an important question: {\\em What is needed from MPI for designing fault tolerant DL implementations?} In this paper, we address this problem for permanent faults. We motivate the need for a fault tolerant MPI specification by an in-depth consideration of recent innovations in DL algorithms and their properties, which drive the need for specific fault tolerance features. We present an in-depth discussion on the suitability of different parallelism types (model, data and hybrid); a need (or lack thereof) for check-pointing of any critical data structures; and most importantly, consideration for several fault tolerance proposals (user-level fault mitigation (ULFM), Reinit) in MPI and their applicability to fault tolerant DL implementations. We leverage a distributed memory implementation of Caffe, currently available under the Machine Learning Toolkit for Extreme Scale (MaTEx). We implement our approaches by extending MaTEx-Caffe for using ULFM-based implementation. Our evaluation using the ImageNet dataset and AlexNet neural network topology demonstrates the effectiveness of the proposed fault tolerant DL implementation using OpenMPI based ULFM.

What do we know about mechanisms for tolerating pathogens, and can tolerance be applied to managing tree diseases?

Science.gov (United States)

Bitty A. Roy

2012-01-01

The terms "resistance" and "tolerance" have been used by different scientists to refer to different things, and they have often been measured (and thus operationally defined) in ways that confuse the two concepts with each other. In keeping with the emerging consensus on resistance and tolerance, the following conceptual distinction is useful:...

Chromium Tolerance and Bioremoval by Cyanobacteria Isolated ...

African Journals Online (AJOL)

Two cyanobacterial species Nostoc calcicola HH-12 and Chroococcus minutus HH-11 isolated from a textile mill oxidation pond were examined individually and as consortium for their chromium(VI) tolerance and bioremoval from aqueous solutions. Both species were tolerant to the metal and showed significant increase ...

Effects of Political Knowledge on Political Tolerance

Science.gov (United States)

Hall, John Powell

2018-01-01

Sexual orientation continues to be an explosive issue in American classrooms. Increasing the political knowledge of students can reduce the volatility of this explosive issue by increasing tolerance toward the lesbian, gay, bisexual, and transgender community. This relationship between political knowledge and political tolerance has been…

Implementations of a four-level mechanical architecture for fault-tolerant robots

International Nuclear Information System (INIS)

Hooper, Richard; Sreevijayan, Dev; Tesar, Delbert; Geisinger, Joseph; Kapoor, Chelan

1996-01-01

This paper describes a fault tolerant mechanical architecture with four levels devised and implemented in concert with NASA (Tesar, D. and Sreevijayan, D., Four-level fault tolerance in manipulator design for space operations. In First Int. Symp. Measurement and Control in Robotics (ISMCR '90), Houston, Texas, 20-22 June 1990.) Subsequent work has clarified and revised the architecture. The four levels proceed from fault tolerance at the actuator level, to fault tolerance via in-parallel chains, to fault tolerance using serial kinematic redundancy, and finally to the fault tolerance multiple arm systems provide. This is a subsumptive architecture because each successive layer can incorporate the fault tolerance provided by all layers beneath. For instance a serially-redundant robot can incorporate dual fault-tolerant actuators. Redundant systems provide the fault tolerance, but the guiding principle of this architecture is that functional redundancies actively increase the performance of the system. Redundancies do not simply remain dormant until needed. This paper includes specific examples of hardware and/or software implementation at all four levels

Effects of sulphur dioxide (SO2) on growth and flowering of SO2-tolerant and non-tolerant genotypes of Phleum pratense.

Science.gov (United States)

Clapperton, M J; Reid, D M

1994-01-01

The objective of this study was to compare the growth and interaction of clipping and sulphur dioxide (SO(2)) exposure on SO(2)-tolerant and non-tolerant genotypes of Phleum pratense at two field sites along an SO(2)-concentration gradient. Sulphur-dioxide-tolerant and non-tolerant genotypes of Phleum pratense were identified from indigenous populations that had been collected along the same SO(2)-concentration gradient in southern Alberta, Canada. Physiological differences between the two genotypes were confirmed by supplying leaves with (14)CO(2) and examining the assimilate partitioning between the genotypes. For the field experiment, clones of each genotype and seedlings grown from commercial seed were planted at two different field sites along an SO(2)-emission gradient. There were no differences in growth between the genotypes at the two field sites after the first year except that the SO(2)-tolerant clones had a greater percentage of root length colonised by vesicular-arbuscular (VA) mycorrhizal fungi. After the second growing season, there was a significant decrease in the number of inflorescences produced by plants exposed to SO(2), particularly by the non-tolerant genotype. The added stress of defoliation appeared to increase the sensitivity of flowering to SO(2), again particularly in the non-tolerant genotype. The results of the field study showed that flowering as opposed to vegetative plant growth was more sensitive to long-term low-concentration SO(2) exposure and that this sensitivity was compounded by the stress interaction of defoliation.

Mechanical stop mechanism for overcoming MEMS fabrication tolerances

International Nuclear Information System (INIS)

Hussein, Hussein; Bourbon, Gilles; Le Moal, Patrice; Lutz, Philippe; Haddab, Yassine

2017-01-01

A mechanical stop mechanism is developed in order to compensate MEMS fabrication tolerances in discrete positioning. The mechanical stop mechanism is designed to be implemented on SOI wafers using a common DRIE etching process. The various fabrication tolerances obtained due to the etching process are presented and discussed in the paper. The principle and design of the mechanism are then presented. Finally, experiments on microfabricated positioning prototypes show accurate steps unaffected by the fabrication tolerances. (technical note)

Exploring Marine Environments To Unravel Tolerance Mechanisms To Relevant Compounds

DEFF Research Database (Denmark)

Machado, Henrique; Cavaleiro, Mafalda; Nørholm, Morten

2015-01-01

Production of biofuels and chemicals using microorganisms has been a research driver in the last decades. The approach started with the engineering of metabolic pathways for production of compounds of interest, but it was soon realized that tolerance to the compounds being produced was one...... of interest, HPLC analyses were performed in order to distinguish between compound-degrading and tolerant bacteria. This led to the identification of seven tolerant and non-degrading isolates, the most interesting ones belonging to the genera Bacillus and Pseudomonas. These will be studied using genomic...... and transcriptomic approaches to identify the tolerance mechanisms used. Exploring new ecological niches, as contaminated marine environments allows the identification of naturally tolerant bacteria to the compounds of interest and most likely to the discovery of new mechanisms of tolerance....

Proteolytic activity of alkaliphilic, salt-tolerant actinomycetes from ...

African Journals Online (AJOL)

tolerant alkaliphilic. All the isolates need to be further studied for the ability of their potential protease enzyme production. Key words: Alkaliphilic actinomycetes, salt tolerant actinomycetes, desert soil, isolation, proteolytic activity.

Environmental dependency in the expression of costs of tolerance to deer herbivory.

Science.gov (United States)

Stinchcombe, John R

2002-05-01

Plant tolerance to natural enemy damage is a defense strategy that minimizes the effects of damage on fitness. Despite the apparent benefits of tolerance, many populations exhibit intermediate levels of tolerance, indicating that constraints on the evolution of tolerance are likely. In a field experiment with the ivyleaf morning glory, costs of tolerance to deer herbivory in the form of negative genetic correlations between deer tolerance and fitness in the absence of damage were detected. However, these costs were detected only in the presence of insect herbivores. Such environmental dependency in the expression of costs of tolerance may facilitate the maintenance of tolerance at intermediate levels.

Bacterial lipoprotein-induced self-tolerance and cross-tolerance to LPS are associated with reduced IRAK-1 expression and MyD88-IRAK complex formation.

LENUS (Irish Health Repository)

Li, Chong Hui

2012-02-03

Tolerance to bacterial cell-wall components may represent an essential regulatory mechanism during bacterial infection. We have demonstrated previously that the inhibition of nuclear factor (NF)-kappaB and mitogen-activated protein kinase activation was present in bacterial lipoprotein (BLP) self-tolerance and its cross-tolerance to lipopolysaccharide (LPS). In this study, the effect of BLP-induced tolerance on the myeloid differentiation factor 88 (MyD88)-dependent upstream signaling pathway for NF-kappaB activation in vitro was examined further. When compared with nontolerant human monocytic THP-1 cells, BLP-tolerant cells had a significant reduction in tumor necrosis factor alpha (TNF-alpha) production in response to a high-dose BLP (86+\\/-12 vs. 6042+\\/-245 ng\\/ml, P < 0.01) or LPS (341+\\/-36 vs. 7882+\\/-318 ng\\/ml, P < 0.01) stimulation. The expression of Toll-like receptor 2 (TLR2) protein was down-regulated in BLP-tolerant cells, whereas no significant differences in TLR4, MyD88, interleukin-1 receptor-associated kinase 4 (IRAK-4), and TNF receptor-associated factor 6 expression were observed between nontolerant and BLP-tolerant cells, as confirmed by Western blot analysis. The IRAK-1 protein was reduced markedly in BLP-tolerant cells, although IRAK-1 mRNA expression remained unchanged as revealed by real-time reverse transcriptase-polymerase chain reaction analysis. Furthermore, decreased MyD88-IRAK immunocomplex formation, as demonstrated by immunoprecipitation, was observed in BLP-tolerant cells following a second BLP or LPS stimulation. BLP pretreatment also resulted in a marked inhibition in total and phosphorylated inhibitor of kappaB-alpha (IkappaB-alpha) expression, which was not up-regulated by subsequent BLP or LPS stimulation. These results demonstrate that in addition to the down-regulation of TLR2 expression, BLP tolerance is associated with a reduction in IRAK-1 expression, MyD88-IRAK association, and IkappaB-alpha phosphorylation. These

Henri Fayol and Zero Tolerance Policies

OpenAIRE

Lee SCHIMMOELLER

2012-01-01

Zero tolerance policies have been increasingly popular in both education and business. Henri Fayol was the one of the earliest and influential thinkers in modern management theory. He defined management as a body of knowledge and defined his 14 administrative principles. It is an interesting exercise to apply Fayol’s teachings to the theory of zero tolerance and attempt to determine what Fayol would think of this new management technique.

Soybean Salt Tolerance 1 (GmST1) Reduces ROS Production, Enhances ABA Sensitivity, and Abiotic Stress Tolerance in Arabidopsis thaliana.

Science.gov (United States)

Ren, Shuxin; Lyle, Chimera; Jiang, Guo-Liang; Penumala, Abhishek

2016-01-01

Abiotic stresses, including high soil salinity, significantly reduce crop production worldwide. Salt tolerance in plants is a complex trait and is regulated by multiple mechanisms. Understanding the mechanisms and dissecting the components on their regulatory pathways will provide new insights, leading to novel strategies for the improvement of salt tolerance in agricultural and economic crops of importance. Here we report that soybean salt tolerance 1, named GmST1, exhibited strong tolerance to salt stress in the Arabidopsis transgenic lines. The GmST1-overexpressed Arabidopsis also increased sensitivity to ABA and decreased production of reactive oxygen species under salt stress. In addition, GmST1 significantly improved drought tolerance in Arabidopsis transgenic lines. GmST1 belongs to a 3-prime part of Glyma.03g171600 gene in the current version of soybean genome sequence annotation. However, comparative reverse transcription-polymerase chain reaction analysis around Glyma.03g171600 genomic region confirmed that GmST1 might serve as an intact gene in soybean leaf tissues. Unlike Glyma.03g171600 which was not expressed in leaves, GmST1 was strongly induced by salt treatment in the leaf tissues. By promoter analysis, a TATA box was detected to be positioned close to GmST1 start codon and a putative ABRE and a DRE cis-acting elements were identified at about 1 kb upstream of GmST1 gene. The data also indicated that GmST1-transgenic lines survived under drought stress and showed a significantly lower water loss than non-transgenic lines. In summary, our results suggest that overexpression of GmST1 significantly improves Arabidopsis tolerance to both salt and drought stresses and the gene may be a potential candidate for genetic engineering of salt- and drought-tolerant crops.

Soybean salt tolerance 1 (GmST1 reduces ROS production, enhances ABA sensitivity and abiotic stress tolerance in Arabidopsis thaliana

Directory of Open Access Journals (Sweden)

Shuxin eRen

2016-04-01

Full Text Available Abiotic stresses, including high soil salinity, significantly reduce crop production worldwide. Salt tolerance in plants is a complex trait and is regulated by multiple mechanisms. Understanding the mechanisms and dissecting the components on their regulatory pathways will provide new insights, leading to novel strategies for the improvement of salt tolerance in agricultural and economic crops of importance. Here we report that soybean salt tolerance 1, named GmST1, exhibited strong tolerance to salt stress in the Arabidopsis transgenic lines. The GmST1-overexpressed Arabidopsis also increased sensitivity to ABA and decreased production of reactive oxygen species (ROS under salt stress. In addition, GmST1 significantly improved drought tolerance in Arabidopsis transgenic lines. GmST1 belongs to a 3-prime part of Glyma.03g171600 gene in the current version of soybean genome sequence annotation. However, comparative RT-PCR analysis around Glyma.03g171600 genomic region confirmed that GmST1 might serve as an intact gene in soybean leaf tissues. Unlike Glyma.03g171600 which was not expressed in leaves, GmST1 was strongly induced by salt treatment in the leaf tissues. By promoter analysis, a TATA box was detected to be positioned close to GmST1 start codon and a putative ABRE and a DRE cis-acting elements were identified at about 1kb upstream of GmST1 gene. The data also indicated that GmST1-transgenic lines survived under drought stress and showed a significantly lower water loss than non-transgenic lines. In summary, our results suggest that overexpression of GmST1 significantly improves Arabidopsis tolerance to both salt and drought stresses and the gene may be a potential candidate for genetic engineering of salt- and drought-tolerant crops.

Radiation for persistent or recurrent epithelial ovarian cancer: a need for reassessment

Energy Technology Data Exchange (ETDEWEB)

Choi, Noorie; Kim, Hak Jae [Dept. of Radiation Oncology, Seoul National University College of Medicine, Seoul (Korea, Republic of); Chang, Ji Hyun; Kim, Suzy [Dept. of Radiation Oncology, SMG-SNU Boramae Medical Center, Seoul (Korea, Republic of)

2017-06-15

The role of radiotherapy (RT) was largely deserted after the introduction of platinum-based chemotherapy, but still survival rates are disappointingly low. This study focuses on assessing the clinical efficacy of RT in relation to chemotherapy resistance. From October 2002 to January 2015, 44 patients were diagnosed with epithelial ovarian cancer (EOC) and treated with palliative RT for persistent or recurrent EOC. All patients received initial treatment with optimal debulking surgery and adjuvant platinum-based chemotherapy. The biologically effective dose (BED) was calculated with α/β set at 10. Ninety-four sites were treated with RT with a median BED of 50.7 Gy (range 28.0 to 79.2 Gy). The primary end-point was the in-field local control (LC) interval, defined as the time interval from the date RT was completed to the date any progressive or newly recurring disease within the RT field was detected on radiographic imaging. The median follow-up duration was 52.3 months (range 7.7 to 179.0 months). The 1-year and 2-year in-field LC rates were 66.0% and 55.0%, respectively. Comparisons of percent change of in-field tumor response showed similar distribution of responses among chemoresistant and chemosensitive tumors. On multivariate analysis of predictive factors for in-field LC analyzed by sites treated, BED ≥ 50 Gy (hazard ratio, 0.4; confidence interval, 0.2–0.9; p = 0.025) showed better outcomes. Regardless of resistance to platinum-based chemotherapy, RT can be a feasible treatment modality for patients with persistent of recurrent EOC. The specific role of RT using updated approaches needs to be reassessed.

A molecular, genetic and physiological analysis of plant aluminum tolerance (abstract)

International Nuclear Information System (INIS)

Pineros, M.

2005-01-01

Aluminum (Al) toxicity is an important agronomic trait, limiting crop production on acid soils that comprise up to 50% of the world's potentially arable lands. A significant genetic variation in Al tolerance exists in both crop plants and Arabidopsis. The exploitation of this genetic variation to breed crops with increased Al tolerance has been a productive and active area of research, however, the underlying molecular, genetic and physiological bases are still not well understood. Only very recently was the first Al tolerance gene, ALMT1, isolated in wheat and shown to be a novel Al-activated malate transporter. Work in our laboratory has focused on using integrated genomic (gene and protein expression profiling), molecular genetic and physiological approaches to identify novel Al tolerance genes and the physiological mechanisms they control in the cereal crops maize and sorghum, and also in arabidopsis. In sorghum we had previously shown that Al tolerance is the result of a single locus, Alt/sub SB/ which maps to the top of sorghum chromosome 3 in a region totally distinct from where the major Al tolerance maps in wheat and other related members of the Triticeae. Very recently, we have used map-based cloning techniques in sorghum to clone Alt/sub SB/ and have found it is a novel Al tolerance gene. Here we will present a molecular characterization of the Alt/sub SB/ gene and also the physiological mechanism of sorghum Al tolerance it controls. In arabidopsis, we have previously shown that Al tolerance is a quantitative trait and have identified two major Al tolerance QTL on chromosomes 1 and 5. These genes function to confer tolerance via Al via activated root malate release. We found that a member of the arabidopsis gene family that is a close homolog to wheat ALMT1 maps near the largest tolerance QTL on chromosome 1 and have also found this gene encodes the Al-activated malate transport involved in arabidopsis Al tolerance. However, we have clear molecular

"Tolerating" Adolescent Needs: Moving beyond Zero Tolerance Policies in High School

Science.gov (United States)

Gregory, Anne; Cornell, Dewey

2009-01-01

The authors contend that zero tolerance discipline policies are inconsistent with adolescent developmental needs for authoritative, as distinguished from authoritarian, discipline. Previous research has applied the notion of authoritative parenting to teaching styles in classrooms, and a similar model of authoritative discipline can guide…

Induced genetic variation for aluminum and salt tolerance in rice

International Nuclear Information System (INIS)

Chaudhry, M.A.; Yoshida, S.; Vegara, B.S.

1989-01-01

Full text: MNH applied to fertilized egg cells of 'Taichung 65' led to an increase in genetic variation in the progenies. Of a M 2 population of 15,000 seedlings, 2.3% were scored tolerant to salt. Tolerant plants showed less shoot and root growth inhibition. 50 variants expressed different degrees of tolerance to Al, even up to 30 ppm. The tolerance was related to longer root development. (author)

Ethnopoly promotes tolerance

CERN Document Server

CERN Bulletin

2010-01-01

On Friday 23 April, 225 primary school children from the eight schools in Meyrin-Cointrin and their accompanying adults took part in a big game of Ethnopoly. Private individuals, associations, administrations, shopkeepers and CERN all opened their doors to them to talk about their countries, their customs and what they are doing to promote tolerance and integration.   The CERN stand set up at ForumMeyrin for the Ethnopoly game. Scurrying from one place to another, the 10 and 11 year olds were made aware of the rich cultural diversity of their commune, which is home to 130 different nationalities. Physicists and engineers from CERN took up residence in the Forum Meyrin for the day in order to talk to the children about the advantages of international collaboration, a subject dear to the Organization's heart. They welcomed around fifty children in the course of the day, conveying to them a message of tolerance: despite their differences, the 10,000 scientists and other members of the CERN...

Concatenated codes for fault tolerant quantum computing

Energy Technology Data Exchange (ETDEWEB)

Knill, E.; Laflamme, R.; Zurek, W.

1995-05-01

The application of concatenated codes to fault tolerant quantum computing is discussed. We have previously shown that for quantum memories and quantum communication, a state can be transmitted with error {epsilon} provided each gate has error at most c{epsilon}. We show how this can be used with Shor`s fault tolerant operations to reduce the accuracy requirements when maintaining states not currently participating in the computation. Viewing Shor`s fault tolerant operations as a method for reducing the error of operations, we give a concatenated implementation which promises to propagate the reduction hierarchically. This has the potential of reducing the accuracy requirements in long computations.

Freezing tolerance of conifer seeds and germinants.

Science.gov (United States)

Hawkins, B J; Guest, H J; Kolotelo, D

2003-12-01

Survival after freezing was measured for seeds and germinants of four seedlots each of interior spruce (Picea glauca x engelmannii complex), lodgepole pine (Pinus contorta Dougl. ex Loud.), Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) and western red cedar (Thuja plicata Donn ex D. Donn). Effects of eight seed treatments on post-freezing survival of seeds and germinants were tested: dry, imbibed and stratified seed, and seed placed in a growth chamber for 2, 5, 10, 15, 20 or 30 days in a 16-h photoperiod and a 22/17 degrees C thermoperiod. Survival was related to the water content of seeds and germinants, germination rate and seedlot origin. After freezing for 3 h at -196 degrees C, dry seed of most seedlots of interior spruce, Douglas-fir and western red cedar had 84-96% germination, whereas lodgepole pine seedlots had 53-82% germination. Freezing tolerance declined significantly after imbibition in lodgepole pine, Douglas-fir and interior spruce seed (western red cedar was not tested), and mean LT50 of imbibed seed of these species was -30, -24.5 and -20 degrees C, respectively. Freezing tolerance continued to decline to a minimum LT50 of -4 to -7 degrees C after 10 days in a growth chamber for interior spruce, Douglas-fir and lodgepole pine, or after 15 days for western red cedar. Minimum freezing tolerance was reached at the stage of rapid hypocotyl elongation. In all species, a slight increase in freezing tolerance of germinants was observed once cotyledons emerged from the seed coat. The decrease in freezing tolerance during the transition from dry to germinating seed correlated with increases in seed water content. Changes in freezing tolerance between 10 and 30 days in the growth chamber were not correlated with seedling water content. Within a species, seedlots differed significantly in freezing tolerance after 2 or 5 days in the growth chamber. Because all seedlots of interior spruce and lodgepole pine germinated quickly, there was no correlation

Quantitative Comparison of Tolerance-Based Feature Transforms

NARCIS (Netherlands)

Reniers, Dennie; Telea, Alexandru

2006-01-01

Tolerance-based feature transforms (TFTs) assign to each pixel in an image not only the nearest feature pixels on the boundary (origins), but all origins from the minimum distance up to a user-defined tolerance. In this paper, we compare four simple-to-implement methods for computing TFTs for binary

Enhanced pathway efficiency of Saccharomyces cerevisiae by introducing thermo-tolerant devices.

Science.gov (United States)

Liu, Yueqin; Zhang, Genli; Sun, Huan; Sun, Xiangying; Jiang, Nisi; Rasool, Aamir; Lin, Zhanglin; Li, Chun

2014-10-01

In this study, thermo-tolerant devices consisting of heat shock genes from thermophiles were designed and introduced into Saccharomyces cerevisiae for improving its thermo-tolerance. Among ten engineered thermo-tolerant yeasts, T.te-TTE2469, T.te-GroS2 and T.te-IbpA displayed over 25% increased cell density and 1.5-4-fold cell viability compared with the control. Physiological characteristics of thermo-tolerant strains revealed that better cell wall integrity, higher trehalose content and enhanced metabolic energy were preserved by thermo-tolerant devices. Engineered thermo-tolerant strain was used to investigate the impact of thermo-tolerant device on pathway efficiency by introducing β-amyrin synthesis pathway, showed 28.1% increased β-amyrin titer, 28-35°C broadened growth temperature range and 72h shortened fermentation period. The results indicated that implanting heat shock proteins from thermophiles to S. cerevisiae would be an efficient approach to improve its thermo-tolerance. Copyright © 2014 Elsevier Ltd. All rights reserved.

Combining Maize Base Germplasm for Cold Tolerance Breeding

OpenAIRE

Rodríguez Graña, Víctor Manuel; Butrón Gómez, Ana María; Sandoya Miranda, Germán; Ordás Pérez, Amando; Revilla Temiño, Pedro

2007-01-01

Early planting can contribute to increased grain yield of maize (Zea mays L.), but it requires cold tolerance. A limited number of cold-tolerant maize genotypes have been reported. The objectives of this study were to test a new strategy to improve cold tolerance in maize searching for broad x narrow genetic combinations that may be useful as base populations for breeding programs, to compare genotype performance under cold-controlled and field conditions, and to establish the major genetic e...

Assessment of stress tolerance acquisition in the heat-tolerant derivative strains of Bifidobacterium animalis subsp. lactis BB-12 and Lactobacillus rhamnosus GG.

Science.gov (United States)

Aakko, J; Sánchez, B; Gueimonde, M; Salminen, S

2014-07-01

The purpose of this study was to investigate the heat-shock response at molecular level in Lactobacillus rhamnosus GG, Bifidobacterium animalis subsp. lactis BB-12 and their heat-tolerant derivatives and to characterize the changes that make the derivatives more robust in terms of heat stress. The study strains were exposed for 2 h to a heat-shock treatment, Bif. animalis subsp. lactis BB-12 and its derivative at 50°C and the Lact. rhamnosus GG and its derivative at 60°C. Protein synthesis before and after heat shock was examined using proteomics and RT-qPCR. The analysis revealed that the regulation of seven proteins in both strain pairs was modified as a response to heat or between the original and the derivative strain. The comparison of wild-type strains and the heat-tolerant derivatives suggests that the acquisition of heat tolerance in the Bif. animalis subsp. lactis BB-12 derivative is due to a slightly increased constitutive level of chaperones, while in Lact. rhamnosus GG derivative, the main reason seems to be a higher ability to induce the production of chaperones. This study revealed possible markers of heat tolerance in B. lactis and Lact. rhamnosus strains. This study increases our knowledge on how Lactobacillus and Bifidobacterium strains may acquire heat tolerance. These findings may be useful for improving the heat tolerance of existing probiotic strains as well as screening new heat-tolerant strains. © 2014 The Society for Applied Microbiology.

Mechanisms of cardiac transplantation tolerance in syngeneic rat radiation chimeras

International Nuclear Information System (INIS)

Moran, T.M.

1981-01-01

Seventy-five percent of adult LEW rats, lethally irradiated (860 R), transplanted with an RT-1 incompatible Wistar Furth (WF) heart or kidney and repopulated on day 2 with a 4:1 mixture of syngeneic thymus and bone marrow cells accept these grafts. In order to look at the ability of animals tolerating WF organ grafts to respond against WF spleen cells in vitro we developed a rat mixed lymphocyte culture. Tolerant animals were tested for the ability to respond to donor antigens and approximately half of the 50 animals tested, were responsive. We attempted to demonstrate suppressor cells which might be responsible for maintaining tolerance in the nonresponders. Neither mixtures at the sensitization or the effector level suggested that tolerance was being maintained by a suppressor cell. An in vivo assay which tested the ability of various cell populations to affect the survival of allogeneic hearts transplanted into sublethally irradiated recipients was then employed. Tolerance is induced using this protocol in a manner similar or identical to tolerance produced by neonatal injection of antigen. This tolerance might be maintained in part by suppressor cells which prevents the generation of clones of cells reactive against the heart donor. The mechanism of tolerance in rats with demonstrable clones of reactive cells remains to be determined

40 CFR 180.425 - Clomazone; tolerances for residues.

Science.gov (United States)

2010-07-01

...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances... Cotton, undelinted seed 0.05 Cucumber 0.1 Pea, succulent 0.05 Pepper 0.05 Peppermint, tops 0.05 Pumpkin 0...

40 CFR 180.588 - Quinoxyfen; tolerances for residues.

Science.gov (United States)

2010-07-01

...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances... Pepper, bell 0.35 Pepper, nonbell 1.7 Pumpkin 0.20 Squash, winter 0.20 Strawberry 0.90 (b) Section 18...

Salt Tolerance

OpenAIRE

Xiong, Liming; Zhu, Jian-Kang

2002-01-01

Studying salt stress is an important means to the understanding of plant ion homeostasis and osmo-balance. Salt stress research also benefits agriculture because soil salinity significantly limits plant productivity on agricultural lands. Decades of physiological and molecular studies have generated a large body of literature regarding potential salt tolerance determinants. Recent advances in applying molecular genetic analysis and genomics tools in the model plant Arabidopsis thaliana are sh...

Orchid flowers tolerance to gamma-radiation

International Nuclear Information System (INIS)

Kikuchi, Olivia Kimiko

2000-01-01

Cut flowers are fresh goods that may be treated with fumigants such as methyl bromide to meet the needs of the quarantine requirements of importing countries. Irradiation is a non-chemical alternative to substitute the methyl bromide treatment of fresh products. In this research, different cut orchids were irradiated to examine their tolerance to gamma-rays. A 200 Gy dose did inhibit the Dendrobium palenopsis buds from opening, but did not cause visible damage to opened flowers. Doses of 800 and 1000 Gy were damaging because they provoked the flowers to drop from the stem. Cattleya irradiated with 750 Gy did not show any damage, and were therefore eligible for the radiation treatment. Cymbidium tolerated up to 300 Gy and above this dose dropped prematurely. On the other hand, Oncydium did not tolerate doses above 150 Gy.(author)

Orchid flowers tolerance to gamma-radiation

Energy Technology Data Exchange (ETDEWEB)

Kikuchi, Olivia Kimiko E-mail: okikuchi@net.ipen.br

2000-03-01

Cut flowers are fresh goods that may be treated with fumigants such as methyl bromide to meet the needs of the quarantine requirements of importing countries. Irradiation is a non-chemical alternative to substitute the methyl bromide treatment of fresh products. In this research, different cut orchids were irradiated to examine their tolerance to gamma-rays. A 200 Gy dose did inhibit the Dendrobium palenopsis buds from opening, but did not cause visible damage to opened flowers. Doses of 800 and 1000 Gy were damaging because they provoked the flowers to drop from the stem. Cattleya irradiated with 750 Gy did not show any damage, and were therefore eligible for the radiation treatment. Cymbidium tolerated up to 300 Gy and above this dose dropped prematurely. On the other hand, Oncydium did not tolerate doses above 150 Gy.(author)

Generating high temperature tolerant transgenic plants: Achievements and challenges.

Science.gov (United States)

Grover, Anil; Mittal, Dheeraj; Negi, Manisha; Lavania, Dhruv

2013-05-01

Production of plants tolerant to high temperature stress is of immense significance in the light of global warming and climate change. Plant cells respond to high temperature stress by re-programming their genetic machinery for survival and reproduction. High temperature tolerance in transgenic plants has largely been achieved either by over-expressing heat shock protein genes or by altering levels of heat shock factors that regulate expression of heat shock and non-heat shock genes. Apart from heat shock factors, over-expression of other trans-acting factors like DREB2A, bZIP28 and WRKY proteins has proven useful in imparting high temperature tolerance. Besides these, elevating the genetic levels of proteins involved in osmotic adjustment, reactive oxygen species removal, saturation of membrane-associated lipids, photosynthetic reactions, production of polyamines and protein biosynthesis process have yielded positive results in equipping transgenic plants with high temperature tolerance. Cyclic nucleotide gated calcium channel proteins that regulate calcium influxes across the cell membrane have recently been shown to be the key players in induction of high temperature tolerance. The involvement of calmodulins and kinases in activation of heat shock factors has been implicated as an important event in governing high temperature tolerance. Unfilled gaps limiting the production of high temperature tolerant transgenic plants for field level cultivation are discussed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Tolerance and withdrawal from prolonged opioid use in critically ill children.

Science.gov (United States)

Anand, Kanwaljeet J S; Willson, Douglas F; Berger, John; Harrison, Rick; Meert, Kathleen L; Zimmerman, Jerry; Carcillo, Joseph; Newth, Christopher J L; Prodhan, Parthak; Dean, J Michael; Nicholson, Carol

2010-05-01

After prolonged opioid exposure, children develop opioid-induced hyperalgesia, tolerance, and withdrawal. Strategies for prevention and management should be based on the mechanisms of opioid tolerance and withdrawal. Relevant manuscripts published in the English language were searched in Medline by using search terms "opioid," "opiate," "sedation," "analgesia," "child," "infant-newborn," "tolerance," "dependency," "withdrawal," "analgesic," "receptor," and "individual opioid drugs." Clinical and preclinical studies were reviewed for data synthesis. Mechanisms of opioid-induced hyperalgesia and tolerance suggest important drug- and patient-related risk factors that lead to tolerance and withdrawal. Opioid tolerance occurs earlier in the younger age groups, develops commonly during critical illness, and results more frequently from prolonged intravenous infusions of short-acting opioids. Treatment options include slowly tapering opioid doses, switching to longer-acting opioids, or specifically treating the symptoms of opioid withdrawal. Novel therapies may also include blocking the mechanisms of opioid tolerance, which would enhance the safety and effectiveness of opioid analgesia. Opioid tolerance and withdrawal occur frequently in critically ill children. Novel insights into opioid receptor physiology and cellular biochemical changes will inform scientific approaches for the use of opioid analgesia and the prevention of opioid tolerance and withdrawal.

77 FR 71555 - Halosulfuron-Methyl; Pesticide Tolerances

Science.gov (United States)

2012-12-03

... LOQ values. In addition, already established tolerances for cattle, goat, horse, and sheep meat...; tolerances for residues. (a) * * * (1) * * * Parts per Commodity million Cattle, fat 0.05 Cattle, meat 0.05 Cattle, meat byproducts 1.0 Goat, fat 0.05 Goat, meat 0.05 Goat, meat byproducts 1.0 Hog, meat byproducts...

7 CFR 51.2282 - Tolerances for color.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Tolerances for color. 51.2282 Section 51.2282... STANDARDS) United States Standards for Shelled English Walnuts (Juglans Regia) Color Requirements § 51.2282 Tolerances for color. (a) All percentages shall be calculated on the basis of weight. (b) In order to allow...

+Gz tolerance after 14 days bed rest and the effects of rehydration.

Science.gov (United States)

Greenleaf, J. E.; Van Beaumont, W.; Bernauer, E. M.; Haines, R. F.; Sandler, H.; Young, H. L.; Yusken, J. W.

1972-01-01

Measurement of the reduction in centrifugation tolerance after two weeks of bedrest with moderate daily exercise, with an attempt to determine if rehydration improves +Gz tolerance. There were significant reductions in +Gz tolerance during bedrest periods at three acceleration levels. Rehydration resulted in a significant increase in tolerance at 2.1G but it did not restore tolerance to control levels. Rehydration did not affect tolerance at 3.2G and 3.8G.

Comment response document for the Secretary of Energy's ''Report to Congress on Reassessment of the Civilian Radioactive Waste Management Program''

International Nuclear Information System (INIS)

1990-11-01

On November 29, 1989, the Secretary of Energy published his ''Report to Congress on the Reassessment of the Civilian Radioactive Waste Management Program'' (Report), and sent copies to numerous interested parties for their review and comment. This document summarizes comments received on the Report and presents the DOE's current responses to those comments as a basis for further discussions. Included as appendixes are a list of commenters, a crosswalk showing where each comment is addressed, the comment letters themselves with specific comments delineated, and the DOE's response to those letters. Twenty-five individuals or organizations submitted comments on the Report. The DOE identified 130 individual comments and classified them into the following seven categories: Management, Institutional, Regulatory, Transportation, Monitored Retrievable Storage, Scheduling, and Yucca Mountain. For the responses, comments were than grouped into more specific topics under each of the major headings. The DOE attempted to respond to all comments

40 CFR 180.110 - Maneb; tolerances for residues.

Science.gov (United States)

2010-07-01

... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.110... None Pepper 7 None Potato 0.1 None Pumpkin 7 None Squash, summer 4 None Squash, winter 4 None Tomato 4...

TOLERANCE OF REGIONAL HIGH SCHOOL STUDENTS: ASSESSMENT AND DEVELOPMENT METHODS

Directory of Open Access Journals (Sweden)

Elena V. Kalachinskaya

2015-01-01

Full Text Available The purpose of the investigation is to define the quality and tolerance level among students; and generalize pedagogical experience of intercultural tolerance formation (as exemplified in Vladivostok State University of Economics and Service.Methods. Theoretical methods of research involve analysis of approaches and results of tolerance among young people; Practical methods – content analysis of the essay content on a given topic, questioning. An empirical case study, described in this article, was carried out by questionnaire survey of 200 VSUES (Vladivostok State University of Economics and Service students from 2–3 courses of various undergraduate training areas.Scientific novelty. The level of students’ tolerant attitude to a series of countries and their residents is specified; combined with the respondents’ knowledge on these countries. Most distinctive students’ views on the «tolerance» concept and reasons for their intolerant behavior are analyzed and presented in this article. Pedagogical and educational technologies used by University for the youth tolerance formation are summarized.Results. Based on the survey, the issues such as limits of applicability of “tolerance” concept in students’ perception, declarative and real tolerance level, and tolerance level to certain countries, as well as in business are investigated. According to the survey, the author makes the conclusion of correlation existence between level of tolerance towards country (nation and level of awareness of it. The author has analysed the students’ essays on tolerance problems; and it was found out that international relations are the most relevant aspect to respondents of tolerant or intolerant behavior. Results of students’ sociological research are compared with results of surveys on similar topics made by All-Russia Public Opinion Research Center and other researchers. Implemented VSUES projects aimed at creating and promoting tolerance

Book review of The Crisis of the European Union. Identity, Citizenship, and Solidarity Reassessed edited by Loredana Radu, Alina Bârgãoanu and Nicoleta Corbu. Bucharest: Comunicare.ro, 2013, 311 pages

Directory of Open Access Journals (Sweden)

Bianca Robescu

2015-04-01

Full Text Available The Crisis of the European Union. Identity, Citizenship, and Solidarity Reassessed explores very popular and very sensitive subjects such as the solidarity of member states, the dichotomy between the “centre” and the “periphery” of the EU, the European identity, and possible solutions to the crisis. The authors of the 11 chapters have joined forces to depict a complete picture of the aspects related to the European crisis.

Religion, tolerance and national development: The Nigerian ...

African Journals Online (AJOL)

Tolerance as the ability to bear with one another inspite of differences either in opinion, belief or knowledge is an indispensable factor for any meaningful progress and development of any nation. To a keen observer of the daily happenings in Nigeria, religious tolerance is more than a topical issue because of its relevance ...

Natural selection on individual variation in tolerance of gastrointestinal nematode infection.

Directory of Open Access Journals (Sweden)

Adam D Hayward

2014-07-01

Full Text Available Hosts may mitigate the impact of parasites by two broad strategies: resistance, which limits parasite burden, and tolerance, which limits the fitness or health cost of increasing parasite burden. The degree and causes of variation in both resistance and tolerance are expected to influence host-parasite evolutionary and epidemiological dynamics and inform disease management, yet very little empirical work has addressed tolerance in wild vertebrates. Here, we applied random regression models to longitudinal data from an unmanaged population of Soay sheep to estimate individual tolerance, defined as the rate of decline in body weight with increasing burden of highly prevalent gastrointestinal nematode parasites. On average, individuals lost weight as parasite burden increased, but whereas some lost weight slowly as burden increased (exhibiting high tolerance, other individuals lost weight significantly more rapidly (exhibiting low tolerance. We then investigated associations between tolerance and fitness using selection gradients that accounted for selection on correlated traits, including body weight. We found evidence for positive phenotypic selection on tolerance: on average, individuals who lost weight more slowly with increasing parasite burden had higher lifetime breeding success. This variation did not have an additive genetic basis. These results reveal that selection on tolerance operates under natural conditions. They also support theoretical predictions for the erosion of additive genetic variance of traits under strong directional selection and fixation of genes conferring tolerance. Our findings provide the first evidence of selection on individual tolerance of infection in animals and suggest practical applications in animal and human disease management in the face of highly prevalent parasites.

Assessing tolerance for wildlife: Clarifying relations between concepts and measures

Science.gov (United States)

Bruskotter, Jeremy T.; Singh, Ajay; Fulton, David C.; Slagle, Kristina

2015-01-01

Two parallel lines of inquiry, tolerance for and acceptance of wildlife populations, have arisen in the applied literature on wildlife conservation to assess probability of successfully establishing or increasing populations of controversial species. Neither of these lines is well grounded in social science theory, and diverse measures have been employed to assess tolerance, which inhibits comparability across studies. We empirically tested behavioral measures of tolerance against self-reports of previous policy-relevant behavior and behavioral intentions. Both composite behavioral measures were strongly correlated (r > .70) with two attitudinal measures of tolerance commonly employed in the literature. The strong correlation between attitudinal and behavioral measures suggests existing attitudinal measures represent valid, parsimonious measures of tolerance that may be useful when behavioral measures are too cumbersome or misreporting of behavior is anticipated. Our results demonstrate how behavioral measures of tolerance provide additional, useful information beyond general attitudinal measures.

Dynamic Leg Exercise Improves Tolerance to Lower Body Negative Pressure

Science.gov (United States)

Watenpaugh, D. E.; Ballard, R. E.; Stout, M. S.; Murthy, G.; Whalen, R. T.; Hargens, A. R.

1994-01-01

These results clearly demonstrate that dynamic leg exercise against the footward force produced by LBNP substantially improves tolerance to LBNP, and that even cyclic ankle flexion without load bearing also increases tolerance. This exercise-induced increase of tolerance was actually an underestimate, because subjects who completed the tolerance test while exercising could have continued for longer periods. Exercise probably increases LBNP tolerance by multiple mechanisms. Tolerance was increased in part by skeletal muscle pumping venous blood from the legs. Rosenhamer and Linnarsson and Rosenhamer also deduced this for subjects cycling during centrifugation, although no measurements of leg volume were made in those studies: they found that male subjects cycling at 98 W could endure 3 Gz centrifugation longer than when they remained relaxed during centrifugation. Skeletal muscle pumping helps maintain cardiac filling pressure by opposing gravity-, centrifugation-, or LBNP-induced accumulation of blood and extravascular fluid in the legs.

40 CFR 180.254 - Carbofuran; tolerances for residues.

Science.gov (United States)

2010-07-01

...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances... than 1 ppm is carbamates) 2 12/31/09 Pumpkin (of which not more than 0.6 ppm is carbamates) 0.8 12/31...

40 CFR 180.215 - Naled; tolerances for residues.

Science.gov (United States)

2010-07-01

... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.215... 0.5 Pea, succulent 0.5 Pepper 0.5 Pumpkin 0.5 Safflower, seed 0.5 Spinach 3 Squash, summer 0.5...

New sunflower hybrids tolerant to tribenuron-methyl

Directory of Open Access Journals (Sweden)

Cvejić Sandra

2016-01-01

Full Text Available The creation of sunflower hybrids tolerant to tribenuron-methyl enabled the use of wider palette of herbicides to control effectively weeds during the growing season. Moreover, thanks to this tolerance, chemical control of broad-leaves weeds in sunflower, especially Cirsium arvense, is more efficient. The Institute of Field and Vegetable Crops offers four new hybrids tolerant to tribenuron-methyl: NS SUMO SUN, NS SUMO STAR, NS SUMO SjAj and NS SUMO SOL, released in 2016. Hybrids belong to early and medium-early maturity groups; have high yield potential and high oil content. They are adapted for cultivation in different environmental conditions. All hybrids are resistant to broomrape (Orobanche cumana Wallr races from A-E and have a high level of tolerance to Phomopsis, white rot (Sclerotinia sclorotiorum, rust (Puccinia helianthi and others. The paper presents the results of seed and oil yield from the official trials of the Department of variety registration within the Ministry of Agriculture and Environmental Protection of the Republic of Serbia.

Artificial sweeteners and mixture of food additives cause to break oral tolerance and induce food allergy in murine oral tolerance model for food allergy.

Science.gov (United States)

Yamashita, H; Matsuhara, H; Miotani, S; Sako, Y; Matsui, T; Tanaka, H; Inagaki, N

2017-09-01

Processed foods are part of daily life. Almost all processed foods contain food additives such as sweeteners, preservatives and colourants. From childhood, it is difficult to avoid consuming food additives. It is thought that oral tolerance for food antigens is acquired during early life. If tolerance fails, adverse immune responses to food proteins may occur. We hypothesized that food additives prevent acquisition of oral tolerance and aimed to verify the safety of food additives. We induced experimental oral tolerance in mice for ovalbumin (OVA), a food antigen, by previous oral treatment with OVA before sensitization with OVA injections. Food additives were administered at the induction of oral tolerance, and food allergy was induced by repeated administration of OVA. Symptoms of food allergy were defined as a change in body temperature and allergic diarrhoea. Saccharin sodium and a mixture of food additives inhibited acquisition of oral tolerance. Hypothermia and allergic diarrhoea with elevation of OVA-specific IgE were induced in the murine model of oral tolerance. Analyses of antigen-presenting cells in mesenteric lymph nodes showed that food additives affected their manner of migration. Additionally, food additives decreased the proportion of CD25 hi regulatory T cells among CD4 + T cells in the mesenteric lymph nodes. A large amount of food additives may prevent acquisition of oral tolerance. Intake of food additives in early life may increase the risk of food allergies. © 2017 John Wiley & Sons Ltd.

Autonomous Congestion Control in Delay-Tolerant Networks

Science.gov (United States)

Burleigh, Scott; Jennings, Esther; Schoolcraft, Joshua

2006-01-01

This presentation highlights communication congestion control in delay-tolerant networks (DTNs). Large-scale future space exploration will offer complex communication challenges that may be best addressed by establishing a network infrastructure. However, current internet techniques for congestion control are not well suited for operation of a network over interplanetary distances. An alternative, delay-tolerant technique for congestion control in a delay-tolerant network is presented. A simple DTN was constructed and an experimental congestion control mechanism was applied. The mechanism appeared to be effective and each router was able to make its bundle acceptance decisions autonomously. Future research will examine more complex topologies and alternative bundle acceptance rules that might enhance performance.

Tolerance Optimization for Mechanisms with Lubricated Joints

International Nuclear Information System (INIS)

Choi, J.-H.; Lee, S.J.; Choi, D.-H.

1998-01-01

This paper addresses an analytical approach to tolerance optimization for planar mechanisms with lubricated joints based on mechanical error analysis. The mobility method is applied to consider the lubrication effects at joints and planar mechanisms are stochastically defined by using the clearance vector model for mechanical error analysis. The uncertainties considered in the analysis are tolerances on link lengths and radial clearances and these are selected as design variables. To show the validity of the proposed method for mechanical error analysis, it is applied to two examples, and the results obtained are compared with those of Monte Carlo simulations. Based on the mechanical error analysis, tolerance optimizations are applied to the examples

Predictors of noninvasive ventilation tolerance in patients with amyotrophic lateral sclerosis.

Science.gov (United States)

Gruis, K L; Brown, D L; Schoennemann, A; Zebarah, V A; Feldman, E L

2005-12-01

Noninvasive ventilation (NIV) appears to improve survival and quality of life in patients with amyotrophic lateral sclerosis (ALS), but little is known about predictors of NIV tolerance. NIV use was assessed and clinical predictors of tolerance were investigated, using predictive modeling, in ALS patients diagnosed and followed in our clinic until death over a 4-year time period. Patients were prescribed NIV based on current practice parameters when respiratory symptoms were present or forced vital capacity was less than 50%. We prescribed NIV in 52% (72) of patients. For those prescribed NIV, information regarding tolerance was available for 50 patients, with 72% (36) tolerant to its use. Tolerance was six times more likely in limb-onset than bulbar-onset ALS patients, with a trend toward reduced tolerance in those with lower forced vital capacity at NIV initiation. Age, gender, and duration of disease were not predictors of NIV tolerance. We conclude that a majority of ALS patients who are prescribed NIV can successfully become tolerant to its use.

In situ FTIR assessment of desiccation-tolerant tissues

NARCIS (Netherlands)

Wolkers, W.F.; Hoekstra, F.A.

2003-01-01

This essay shows how Fourier transform infrared (FTIR) microspectroscopy can be applied to study thermodynamic parameters and conformation of endogenous biomolecules in desiccation-tolerant biological tissues. Desiccation tolerance is the remarkable ability of some organisms to survive complete

Viral Infection: A Potent Barrier to Transplantation Tolerance

Directory of Open Access Journals (Sweden)

David M. Miller

2008-01-01

Full Text Available Transplantation of allogeneic organs has proven to be an effective therapeutic for a large variety of disease states, but the chronic immunosuppression that is required for organ allograft survival increases the risk for infection and neoplasia and has direct organ toxicity. The establishment of transplantation tolerance, which obviates the need for chronic immunosuppression, is the ultimate goal in the field of transplantation. Many experimental approaches have been developed in animal models that permit long-term allograft survival in the absence of chronic immunosuppression. These approaches function by inducing peripheral or central tolerance to the allograft. Emerging as some of the most promising approaches for the induction of tolerance are protocols based on costimulation blockade. However, as these protocols move into the clinic, there is recognition that little is known as to their safety and efficacy when confronted with environmental perturbants such as virus infection. In animal models, it has been reported that virus infection can prevent the induction of tolerance by costimulation blockade and, in at least one experimental protocol, can lead to significant morbidity and mortality. In this review, we discuss how viruses modulate the induction and maintenance of transplantation tolerance.

Tolerance and immunity in mice infected with herpes simplex virus: studies on the mechanism of tolerance to delayed-type hypersensitivity.

Science.gov (United States)

Nash, A A; Phelan, J; Gell, P G; Wildy, P

1981-06-01

Tolerance to delayed-type hypersensitivity is produced in mice following an intravenous injection of herpes simplex virus. This form of tolerance is produced early on, following simultaneous injections of virus subcutaneously and intravenously, and is long lasting (greater than 100 days). The early tolerance mechanism is resistant to high doses of cyclophosphamide and is not transferable by serum or spleen cells taken after 7 days. However, spleen cells taken at 14 days onwards inhibit the induction of delayed hypersensitivity when transferred to normal syngeneic recipients. These cells are T lymphocytes and are specific for the herpes type used in the induction.

A fault-tolerant software strategy for digital systems

Science.gov (United States)

Hitt, E. F.; Webb, J. J.

1984-01-01

Techniques developed for producing fault-tolerant software are described. Tolerance is required because of the impossibility of defining fault-free software. Faults are caused by humans and can appear anywhere in the software life cycle. Tolerance is effected through error detection, damage assessment, recovery, and fault treatment, followed by return of the system to service. Multiversion software comprises two or more versions of the software yielding solutions which are examined by a decision algorithm. Errors can also be detected by extrapolation from previous results or by the acceptability of results. Violations of timing specifications can reveal errors, or the system can roll back to an error-free state when a defect is detected. The software, when used in flight control systems, must not impinge on time-critical responses. Efforts are still needed to reduce the costs of developing the fault-tolerant systems.

Establishing soil loss tolerance: an overview

OpenAIRE

Costanza Di Stefano; Vito Ferro

2016-01-01

Soil loss tolerance is a criterion for establishing if a soil is potentially subjected to erosion risk, productivity loss and if a river presents downstream over-sedimentation or other off-site effects are present at basin scale. At first this paper reviews the concept of tolerable soil loss and summarises the available definitions and the knowledge on the recommended values and evaluating criteria. Then a threshold soil loss value, at the annual temporal scale, established for limiting rilin...

Thermodynamic re-assessment of the Pu–U system and its application to the ternary Pu–U–Ga system

Energy Technology Data Exchange (ETDEWEB)

Perron, A., E-mail: perron1@llnl.gov [Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States); Turchi, P.E.A.; Landa, A.; Söderlind, P. [Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States); Ravat, B.; Oudot, B.; Delaunay, F. [CEA-Centre de Valduc, 21120 Is sur Tille (France); Kurata, M. [JAEA, Nucl. Sci. and Engn. Directorate, Tokai, Ibaraki 3191195 (Japan)

2014-11-15

Highlights: • The ab initio aided CALPHAD assessment of the Pu–U system has been realized. • The Pu–U–Ga thermodynamic database has been developed. • The δ-phase (fcc) of the Pu–U–Ga system is stabilized by Ga. • The stability of the complex η and ζ phases is promoted by U in the Pu–U–Ga system. - Abstract: Phase diagram and thermodynamic properties of the Plutonium–Uranium (Pu–U) system have been successfully re-assessed using the CALPHAD method with input from ab initio electronic-structure calculations for the bcc phase (γ-U, ∊-Pu). Results and methodology are discussed and compared with previous assessments. In addition, the already assessed Pu–Ga (Gallium) and U–Ga data are combined to build the Pu–U–Ga thermodynamic database. The predictions made using this database indicate that a small amount of U impacts the (δ-Pu) Pu–Ga phase stability by precipitating the complicated η and ζ phases that exist in the Pu–U system. Finally, the present investigation provides guidelines for further experimental studies.

Stress tolerant crops from nitrogen fixing trees

Energy Technology Data Exchange (ETDEWEB)

Becker, R.; Saunders, R.M.

1983-01-01

Notes are given on the nutritional quality and uses of: pods of Geoffroea decorticans, a species tolerant of saline and limed soils and saline water; seeds of Olneya tesota which nodulates readily and fixes nitrogen and photosynthesizes at low water potential; and pods of Prosopis chilensis and P. tamarugo which tolerate long periods without rain. 3 references.

16 CFR 460.8 - R-value tolerances.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false R-value tolerances. 460.8 Section 460.8... INSULATION § 460.8 R-value tolerances. If you are a manufacturer of home insulation, no individual specimen of the insulation you sell can have an R-value more than 10% below the R-value shown in a label, fact...

Radiation tolerance of the vaginal mucosa

International Nuclear Information System (INIS)

Hintz, b.L.; Kagan, A.R.; Chan, P.; Gilbert, H.A.; Nussbaum, H.; Rao, A.R.; Wollin, M.

1980-01-01

Sixteen patients with cancer of the vagina that were controlled locally for a minimum of eighteen months after teletherpay (T) or brachytherapy (B) or both (T and B), were analyzed for radiation tolerance of the vaginal mucosa. The site of vaginal necrosis did not always coincide with the site of the tumor. The posterior wall appeared more vulnerable than the anterior or lateral walls. For the distal vaginal mucosa, necrosis requiring surgical intervention occurred following combined T and B, if summated rad exceeded9800. The upper vagina tolerated higher dosages. No patient surgery for upper vaginal necrosis even though summated (T and B) dosage up to 14,000 rad was applied. Placing radioactive needles on the surface of the vaginal cylinder with or without interstitial perincal needles should be avoided. Further accumulation of data is needed to define these vaginal mucosa tolerance limits more closely

Competition of tolerant strategies in the spatial public goods game

Science.gov (United States)

Szolnoki, Attila; Perc, Matjaž

2016-08-01

Tolerance implies enduring trying circumstances with a fair and objective attitude. To determine whether evolutionary advantages might be stemming from diverse levels of tolerance in a population, we study a spatial public goods game, where in addition to cooperators, defectors, and loners, tolerant players are also present. Depending on the number of defectors within a group, a tolerant player can either cooperate in or abstain from a particular instance of the game. We show that the diversity of tolerance can give rise to synergistic effects, wherein players with a different threshold in terms of the tolerated number of defectors in a group compete most effectively against defection and default abstinence. Such synergistic associations can stabilise states of full cooperation where otherwise defection would dominate. We observe complex pattern formation that gives rise to an intricate phase diagram, where invisible yet stable strategy alliances require outmost care lest they are overlooked. Our results highlight the delicate importance of diversity and tolerance for the provisioning of public goods, and they reveal fascinating subtleties of the spatiotemporal dynamics that is due to the competition of subsystem solutions in structured populations.

Novel neural networks-based fault tolerant control scheme with fault alarm.

Science.gov (United States)

Shen, Qikun; Jiang, Bin; Shi, Peng; Lim, Cheng-Chew

2014-11-01

In this paper, the problem of adaptive active fault-tolerant control for a class of nonlinear systems with unknown actuator fault is investigated. The actuator fault is assumed to have no traditional affine appearance of the system state variables and control input. The useful property of the basis function of the radial basis function neural network (NN), which will be used in the design of the fault tolerant controller, is explored. Based on the analysis of the design of normal and passive fault tolerant controllers, by using the implicit function theorem, a novel NN-based active fault-tolerant control scheme with fault alarm is proposed. Comparing with results in the literature, the fault-tolerant control scheme can minimize the time delay between fault occurrence and accommodation that is called the time delay due to fault diagnosis, and reduce the adverse effect on system performance. In addition, the FTC scheme has the advantages of a passive fault-tolerant control scheme as well as the traditional active fault-tolerant control scheme's properties. Furthermore, the fault-tolerant control scheme requires no additional fault detection and isolation model which is necessary in the traditional active fault-tolerant control scheme. Finally, simulation results are presented to demonstrate the efficiency of the developed techniques.

40 CFR 180.294 - Benomyl; tolerances for residues.

Science.gov (United States)

2010-07-01

... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.294.../08 Poultry, meat byproducts, except liver 0.1 1/1/08 Pumpkin 1.0 1/1/07 Raspberry 7.0 1/1/08 Rice...

131I-BSP liver function test by BSP tolerance

International Nuclear Information System (INIS)

Kanda, Koichi

1974-01-01

131 I-BSP liver function test after BSP intravenous tolerance was discussed, assuming that the reason why measurements of 131 I-BSP retention rate at 30 minutes and 131 I-BSP disappearance rate in blood showed respectable overlapping between normal group and group with slight liver disorders as compared with BSP test and the reason why differential diagnosis was difficult were due to underestimate of tolerance volume of 131 I-BSP. 131 I-BSP was observed with time as to 70 persons with normal liver function and 257 cases of liver diseases, using 5, 3 and 2 mg of non-radioactive BSP tolerance volume per kilogram of body weight. 131 I-BSP retention rate at 30 minutes and 131 I-BSP disappearance rate in blood are possible to separate overlapping over control in each measurement value at 3-5 mg/kg of tolerance, and in comparison of 3 mg and 5 mg, the latter showed a little excellent result. So, it was decided that tolerance of 3 mg/kg was a proper dose, considering tolerance to liver cells. 131 I-BSP retention rate at 30 minutes was a little excellent in accuracy and disappearance rate in blood after BSP tolerance is simple and profitable for practical use because collection of blood was only one time and measurement could be made with whole blood. As mentioned above, this method is seemed to be useful to practice of liver function test. (Kanao, N.)

Role of donor lymphoid cells in the transfer of allograft tolerance

International Nuclear Information System (INIS)

Pierce, G.E.; Watts, L.M.

1985-01-01

Tolerance to murine skin allografts across a MHC disparity was induced by conditioning primary hosts with sublethal fractionated total-body irradiation (FTBI) and transfusion of allogeneic bone marrow (BM). Tolerance could be adoptively transferred to secondary hosts conditioned by FTBI with infusion of spleen cells from hosts bearing intact skin allografts greater than 60 days. Tolerance could not be transferred by tolerant host spleen (THS) preparations from which cells of the donor genotype had been deleted by cytotoxic alloantisera. Deletion of host genotype cells, however, did not diminish the capability of THS to transfer tolerance. All of the tolerizing activity of THS appeared to reside within cells of the donor genotype. Small numbers of normal donor spleen cells could induce tolerance in FTBI hosts but only at the expense of very high mortality, in contrast to the low mortality observed with tolerizing injections of allogeneic donor cells from THS or injections of normal semiallogeneic F1 hybrid spleen cells. If an active immune response is responsible for tolerance induction/transfer in this model, allogeneic donor lymphoid cells derived from BM, in contrast to donor spleen cells, must be capable of mounting this response without concomitant severe GVHD. In future experiments, cells of donor genotype can be isolated from THS and purified in sufficient numbers to compare their tolerizing efficiency vs. that of normal donor cells, detect possible suppression of normal host cell alloreactivity in vitro and identify the donor cell phenotypes involved

Possible new roles for tolerable risk mediators

International Nuclear Information System (INIS)

O'Riordan, T.

1989-01-01

In his report on the Sizewell B Inquiry, the Inspector, Sir Frank Layfield, Q.C. introduced the term ''tolerable risk''. He regarded this as a better concept than the much abused and mis-interpreted phrase ''acceptable risk''. The application of tolerable risk implies that, even after regulation and incorporation of appropriate design safety criteria, there will always be a residual risk over which elements of the public will remain uneasy. They may tolerate, but they do not accept. They only tolerate because they have come to trust the process by which safety is assessed and delivered. This interpretation also implies that no safety target, the central theme of this meeting, should ever be regarded as stable or final. Such targets should continually be argued about and subject to regular searching review. Above all, such targets need to be re-justified to a doubting public so that they can be assured that the safety delivery process, namely the principles and management methods to ensure safety levels are actually met, is accountable and open for them to inspect. Thus the ''tolerable zone'' of nuclear plant safety is the product of procedures not simply assessments. These procedures need to be robust and adaptable. They need to be able to incorporate diversity of viewpoints and have a capacity to enable all who are involved to learn from each other's viewpoints and experience. In short the safety determination process needs to be more participatory and creative. (author)

77 FR 72984 - Buprofezin Pesticide Tolerances; Technical Correction

Science.gov (United States)

2012-12-07

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 180 [EPA-HQ-OPP-2011-0759; FRL-9371-3] Buprofezin..., 2012, concerning buprofezin pesticide tolerances. This document corrects a typographical error. DATES...: Sec. 180.511 Buprofezin; tolerances for residues. (a) * * * Parts per Commodity million...

Quantifying tolerance indicator values for common stream fish species of the United States

Science.gov (United States)

Meador, M.R.; Carlisle, D.M.

2007-01-01

The classification of fish species tolerance to environmental disturbance is often used as a means to assess ecosystem conditions. Its use, however, may be problematic because the approach to tolerance classification is based on subjective judgment. We analyzed fish and physicochemical data from 773 stream sites collected as part of the U.S. Geological Survey's National Water-Quality Assessment Program to calculate tolerance indicator values for 10 physicochemical variables using weighted averaging. Tolerance indicator values (TIVs) for ammonia, chloride, dissolved oxygen, nitrite plus nitrate, pH, phosphorus, specific conductance, sulfate, suspended sediment, and water temperature were calculated for 105 common fish species of the United States. Tolerance indicator values for specific conductance and sulfate were correlated (rho = 0.87), and thus, fish species may be co-tolerant to these water-quality variables. We integrated TIVs for each species into an overall tolerance classification for comparisons with judgment-based tolerance classifications. Principal components analysis indicated that the distinction between tolerant and intolerant classifications was determined largely by tolerance to suspended sediment, specific conductance, chloride, and total phosphorus. Factors such as water temperature, dissolved oxygen, and pH may not be as important in distinguishing between tolerant and intolerant classifications, but may help to segregate species classified as moderate. Empirically derived tolerance classifications were 58.8% in agreement with judgment-derived tolerance classifications. Canonical discriminant analysis revealed that few TIVs, primarily chloride, could discriminate among judgment-derived tolerance classifications of tolerant, moderate, and intolerant. To our knowledge, this is the first empirically based understanding of fish species tolerance for stream fishes in the United States.

Induced mutations for tolerance of oats to crown rust

International Nuclear Information System (INIS)

Simons, M.D.; Frey, K.J.

1977-01-01

Seeds of three oat (Avena sativa and A. abyssinica) strains were treated with ethyl methanesulphonate (EMS), and crown rust (caused by Puccinia coronata var. avenae) tolerance ratios of M 5 -derived lines were compared with untreated checks. Tolerance ratios of mutant lines tended to be distributed in both plus and minus directions. No mutant oat line had a significant increase in grain yield, but many showed significantly depressed yields. With C.I. 6665, only five of 130 mutagen-derived lines were not significantly below the check for grain yield; one of these had significantly improved tolerance. Re-treatment of selected strains from a previous EMS treatment (original cultivar was Clintland-60) gave one M 5 -derived oat line (of 100 tested) that was equal to Clintland-60 in grain yield and sustained no damage from crown rust (i.e. it had a tolerance ratio of 100). EMS treatment of the highly susceptible tetraploid C.I. 2110 resulted in both significantly increased and reduced tolerance. (author)

Proteomic Techniques and Management of Flooding Tolerance in Soybean.

Science.gov (United States)

Komatsu, Setsuko; Tougou, Makoto; Nanjo, Yohei

2015-09-04

Climate change is considered a major threat to world agriculture and food security. To improve the agricultural productivity and sustainability, the development of high-yielding stress-tolerant, and climate-resilient crops is essential. Of the abiotic stresses, flooding stress is a very serious hazard because it markedly reduces plant growth and grain yield. Proteomic analyses indicate that the effects of flooding stress are not limited to oxygen deprivation but include many other factors. Although many flooding response mechanisms have been reported, flooding tolerance mechanisms have not been fully clarified for soybean. There were limitations in soybean materials, such as mutants and varieties, while they were abundant in rice and Arabidopsis. In this review, plant proteomic technologies are introduced and flooding tolerance mechanisms of soybeans are summarized to assist in the improvement of flooding tolerance in soybeans. This work will expedite transgenic or marker-assisted genetic enhancement studies in crops for developing high-yielding stress-tolerant lines or varieties under abiotic stress.

Impact of the lay-off length on +Gz tolerance.

Science.gov (United States)

Mikuliszyn, Romuald; Kowalski, Wieslaw; Kowalczuk, Krzysztof

2002-07-01

There are many factors affecting pilots' +Gz-tolerance. Recently, attention of the aviation community has been focused on lay-off and it's impact on +Gz-tolerance. Pilots of the Polish Air Force (PAF) have dealt with that problem for several years now. The aim of the study was to provide insight on how lay-off periods with different duration impact +Gz-tolerance. 95 male jet pilots from the PAF participated in the study. Every one had at least two weeks lay-off period (non-medical reasons). Subjects were divided into four groups according to the length of lay-off period (2-4 weeks; 5-13 weeks; 14-26 weeks; 27-154 weeks), All pilots were subjected to a centrifuge exposure in GOR (0.1 G/s) or ROR (1.0 G/s) profiles, depending on the pre-lay-off exposure. Post-lay-off exposures were carried out directly after lay-off. 18 jet pilots without any lay-off constituted the control group. The difference between pre- and post-lay-off G-tolerance limit (-0,93 +/- 0,53) was statistically significant (p<0.01) only for one group, where lay-off period ranged between two and four weeks. No statistically significant differences were found where influence of other factors like total and yearly flight hours, heart rate gain (AHR) or physical activity measured as maximal oxygen intake were considered. 2-4 weeks of lay-off period decreases +Gz tolerance is statistically significant manner. Subsequent increase of lay-off period does not result in mean tolerance changes for group, however in certain individuals critical decrement of +Gz tolerance occurs. Total and last year flying hours, physical fitness does not modify impact of lay-off period on +Gz tolerance.

A study on quantification of unavailability of DPPS with fault tolerant techniques considering fault tolerant techniques' characteristics

International Nuclear Information System (INIS)

Kim, B. G.; Kang, H. G.; Kim, H. E.; Seung, P. H.; Kang, H. G.; Lee, S. J.

2012-01-01

With the improvement of digital technologies, digital I and C systems have included more various fault tolerant techniques than conventional analog I and C systems have, in order to increase fault detection and to help the system safely perform the required functions in spite of the presence of faults. So, in the reliability evaluation of digital systems, the fault tolerant techniques (FTTs) and their fault coverage must be considered. To consider the effects of FTTs in a digital system, there have been several studies on the reliability of digital model. Therefore, this research based on literature survey attempts to develop a model to evaluate the plant reliability of the digital plant protection system (DPPS) with fault tolerant techniques considering detection and process characteristics and human errors. Sensitivity analysis is performed to ascertain important variables from the fault management coverage and unavailability based on the proposed model

Heterosis and Combining Ability of Drought-Tolerant Maize Lines for ...

African Journals Online (AJOL)

In drought prone areas of Ethiopia, maize is produced by small-scale farmers' where additional inputs are rarely applied. Although genetic tolerance is recommended for moisture stress, there is limited information on drought-tolerant genotypes reaction to variable environments. In this study, eight drought tolerant lines and ...

A re-determination and re-assessment of the thermodynamics of sublimation of uranium dioxide

International Nuclear Information System (INIS)

Ackermann, R.J.; Rauh, E.G.; Rand, M.H.

1980-01-01

New mass-spectrometric measurements on the ion-intensity of UO 2 + over urania from 1813 to 2463 K are reported. Although the mean value for the enthalpy of sublimation calculated from these measurements is close to previous values, a detailed examination of the results indicates that there is an appreciable curvature in the log p versus reciprocal-temperature curve for the process: UO 2 (s)→UO 2 (g). This is attributed to a large negative ΔCsub(p) for the sublimation reaction, arising from the sharp increase in Csub(p) (UO 2 (s)) above approximately 1750 K. A thorough re-assessment of the previous studies on the sublimation of urania suggests an 'international' average value of psub(UO 2 )=(1.3+-0.1)x10 -6 atm at 2150 K; Knudsen effusion measurements above 2450 K (p>1x10 -4 atm) are thought to be in error due to departures from molecular flow. Thermal functions for UO 2 (g) have been calculated, assuming a linear molecule and electronic contributions to the partition function based on those of ThO(g). Anharmonicity corrections have been included. When these functions are combined with the thermal functions for UO 2 (s), recently assessed, the third law heat of sublimation at 298.15 K becomes 147.8 kcal.mol -1 with a trend of only 0.2 kcal.mol -1 across the temperature range 1800 to 2400 K. (author)

Proteomics of desiccation tolerance during development and germination of maize embryos

DEFF Research Database (Denmark)

Huang, Hui; Møller, Ian Max; Song, Song-Quan

2012-01-01

Maize seeds were used to identify the key embryo proteins involved in desiccation tolerance during development and germination. Immature maize embryos (28N) during development and mature embryos imbibed for 72 h (72HN) are desiccation sensitive. Mature maize embryos (52N) during development...... pattern. We infer that these eleven proteins are involved in seed desiccation tolerance. We conclude that desiccation-tolerant embryos make more economical use of their resources to accumulate protective molecules and antioxidant systems to deal with maturation drying and desiccation treatment........ are desiccation tolerant. Thiobarbituric acid reactive substance and hydrogen peroxide contents decreased and increased with acquisition and loss of desiccation tolerance, respectively. A total of 111 protein spots changed significantly (1.5 fold increase/decrease) in desiccation-tolerant and -sensitive embryos...

40 CFR 180.435 - Deltamethrin; tolerances for residues.

Science.gov (United States)

2010-07-01

... in food handling establishments, including food service, manufacturing and processing establishments.... Contamination of food/feed or food/feed contact surfaces shall be avoided. (B) To assure safe use of the...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...

40 CFR 180.422 - Tralomethrin; tolerances for residues.

Science.gov (United States)

2010-07-01

...-handling establishments, including food service, manufacturing, and processing establishments, such as... shall be limited to a maximum of 0.06 percent active ingredient. Contamination of food and food-contact...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...

40 CFR 180.442 - Bifenthrin; tolerances for residues.

Science.gov (United States)

2010-07-01

... application of bifenthrin in food handling establishments, including food service, manufacturing and... ingredient. Contamination of food/feed or food/feed contact surfaces shall be avoided. (B) To assure safe use...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...

40 CFR 180.108 - Acephate; tolerances for residues.

Science.gov (United States)

2010-07-01

... establishments, including food service, manufacturing and processing establishments, such as restaurants... avoid atomization or splashing of the spray. Contamination of food or food-contact surfaces shall be... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.108...

Reassessment of the taxonomic position of Burkholderia andropogonis and description of Robbsia andropogonis gen. nov., comb. nov.

Science.gov (United States)

Lopes-Santos, Lucilene; Castro, Daniel Bedo Assumpção; Ferreira-Tonin, Mariana; Corrêa, Daniele Bussioli Alves; Weir, Bevan Simon; Park, Duckchul; Ottoboni, Laura Maria Mariscal; Neto, Júlio Rodrigues; Destéfano, Suzete Aparecida Lanza

2017-06-01

The phylogenetic classification of the species Burkholderia andropogonis within the Burkholderia genus was reassessed using 16S rRNA gene phylogenetic analysis and multilocus sequence analysis (MLSA). Both phylogenetic trees revealed two main groups, named A and B, strongly supported by high bootstrap values (100%). Group A encompassed all of the Burkholderia species complex, whi.le Group B only comprised B. andropogonis species, with low percentage similarities with other species of the genus, from 92 to 95% for 16S rRNA gene sequences and 83% for conserved gene sequences. Average nucleotide identity (ANI), tetranucleotide signature frequency, and percentage of conserved proteins POCP analyses were also carried out, and in the three analyses B. andropogonis showed lower values when compared to the other Burkholderia species complex, near 71% for ANI, from 0.484 to 0.724 for tetranucleotide signature frequency, and around 50% for POCP, reinforcing the distance observed in the phylogenetic analyses. Our findings provide an important insight into the taxonomy of B. andropogonis. It is clear from the results that this bacterial species exhibits genotypic differences and represents a new genus described herein as Robbsia andropogonis gen. nov., comb. nov.

Drought tolerant wheat varieties developed through mutation ...

African Journals Online (AJOL)

In search for higher yielding drought tolerant wheat varieties, one of the Kenyan high yielding variety 'Pasa' was irradiated with gamma rays (at 150, 200, and 250gy) in 1997 so as to induce variability and select for drought tolerance. Six mutants ((KM10, KM14, KM15, KM18, KM20 and KM21) were selected at M4 for their ...

Tolerância de frutos de pessegueiro a geadas Fruit frost tolerance in peach

Directory of Open Access Journals (Sweden)

André Paulo Assmann

2008-12-01

Full Text Available Este trabalho teve como objetivo avaliar a tolerância de frutos de pessegueiro aos danos ocasionados pela geada. A geada ocorreu no dia 5 de setembro de 2006, sendo que a temperatura mínima, a 1,5 m do solo, foi de - 1,06ºC. Foram avaliados 28 genótipos de pessegueiro em diferentes estádios fenológicos. O delineamento experimental foi o inteiramente casualizado, com três repetições (plantas de pessegueiro, procedendo-se à avaliação em seis ramos por planta. No dia em que ocorreu a geada, foram mensurados o número de frutos por ramo, diâmetro sutural médio dos frutos, número total de gemas vegetativas, percentual de brotação e percentual de brindilas formadas a partir das gemas brotadas. Uma segunda avaliação foi realizada 15 dias após a primeira, para avaliar o percentual de queda de frutos e o diâmetro sutural médio dos frutos remanescentes. Genótipos bem enfolhados e cujos frutos apresentavam endocarpo endurecido, no momento da ocorrência da geada, foram tolerantes ao dano ocasionado pelo frio; frutos com diâmetro sutural inferior a 20 mm foram suscetíveis à geada, enquanto frutos com diâmetro sutural superior a 30 mm apresentaram boa tolerância, independentemente do genótipo avaliado.The aim of this work was to evaluate the fruit damage tolerance in different peach tree genotypes after natural freeze. The frost happened on September 5, 2006, and the minimum temperature, 1.5 meters over soil, was -1.06ºC. Twenty- eight peach tree genotypes, in different stages of development, were evaluated, in a completely random design, in three replication (plants and six branches by plants. Immediately after frost, we measured the number of fruits per branches, average fruit suture diameter, percentage of sprouts and percentage of twigs in formation. A second evaluation was accomplished fifteen days after the first one in order to assess the percentage of fruit drop and the average remaining fruit suture diameter. Genotypes

Development of salt tolerant plants through genetic engineering (abstract)

International Nuclear Information System (INIS)

Mukhtar, Z.; Khan, S.A.; Zafar, Y.

2005-01-01

Salinity stress is one of the most serious factors limiting the productivity of agricultural crops. Genetic engineering provides a useful tool for tailoring plants with enhanced salt tolerance characteristics. Many organisms have evolved mechanisms to survive and grow under such extreme environments. These organisms provide us with a useful source of genes which can be used to improve salt tolerance in plants. The present study aims at identification and cloning of useful halo tolerance conferring genes from fungi and plants and to develop salt tolerant transgenic plants. Here we describe the cloning and use of HSR1 gene (a yeast transcription factor known to confer salt tolerance) and Na/sup +//H/sup +/ antiporter gene AtNHX1 (3016 bp) from Arabidopsis thaliana, and transformation of tobacco with HSR1 and AtNHX1 genes through Agrobacterium method. A number of transgenic tobacco plants were regenerated from leaf explants transformed with Agrobacterium tumefaciens (LBA4404) having HSR1 and AtNHX1 genes by leaf disc method. The putative transgenic plants were analyzed by PCR and dot blot analysis. Screening of these transgenic plants at different salinity levels is in progress which will help identify the suitable plant lines and thus the promising genes which can be further exploited to engineer salt tolerant crop plants. (author)

Creando entornos de convivencia social (Creating Environments for Social Tolerance).

Science.gov (United States)

Moreno Garcia, Teresa, Ed.

2002-01-01

This Spanish- and Portuguese-language bulletin presents articles on matters of tolerance, and the lack of it. Among the topics covered are the similarities and differences between projects and organizations that promote tolerance, methods of teaching tolerance, four different projects that combat violence, and some ways in which such projects…

Heavy metal tolerance in populations of Agrostis tenuis Sibth and other grasses

Energy Technology Data Exchange (ETDEWEB)

Gregory, R P.G.; Bradshaw, A D

1965-01-01

Populations of Agrostis tenuis can be found growing on a variety of different mine workings in conditions of metal contamination toxic to most higher plants. Samples of such populations together with samples of populations taken from ordinary pastures were tested for tolerance to high concentrations of copper, nickel, lead and zinc by measuring the effect of these metals on the rooting of tillers. The soils in which the populations were originally growing were analyzed for each of the four metals and the tolerances of the populations have been related to the levels of the metals in the soils. In general, the mine populations show remarkable tolerance to the particular metals present in high quantities in the soils of their original habitats: the pasture populations do not show this tolerance. The tolerance is specific, for, except in the case of zinc and nickel, tolerance to one metal is not accompanied by tolerance to any other. There must, therefore, be three specific tolerances in the one species. Individual tolerances can however occur together and this can be related to the occurrence of the two metals together in toxic quantities in the soil. The tolerances must be genetically controlled but the physiological mechanism involved is not clear. A number of other species were also shown to have populations tolerant to high levels of zinc. 27 references, 7 figures, 6 tables.

Mouthpiece ventilation in Duchenne muscular dystrophy: a rescue strategy for noncompliant patients

OpenAIRE

Fiorentino, Giuseppe; Annunziata, Anna; Cauteruccio, Rosa; Frega, Gianfranco Scotto di; Esquinas, Antonio

2016-01-01

ABSTRACT Objective: To evaluate mouthpiece ventilation (MPV) in patients with Duchenne muscular dystrophy (DMD) who are noncompliant with noninvasive ventilation (NIV). Methods: We evaluated four young patients with DMD who had previously refused to undergo NIV. Each patient was reassessed and encouraged to try MPV. Results: The four patients tolerated MPV well and were compliant with NIV at home. MPV proved to be preferable and more comfortable than NIV with any other type of interface. T...

Immuno-therapy with anti-CTLA4 antibodies in tolerized and non-tolerized mouse tumor models.

Directory of Open Access Journals (Sweden)

Jonas Persson

Full Text Available Monoclonal antibodies specific for cytotoxic T lymphocyte-associated antigen 4 (anti-CTLA4 are a novel form of cancer immunotherapy. While preclinical studies in mouse tumor models have shown anti-tumor efficacy of anti-CTLA4 injection or expression, anti-CTLA4 treatment in patients with advanced cancers had disappointing therapeutic benefit. These discrepancies have to be addressed in more adequate pre-clinical models. We employed two tumor models. The first model is based on C57Bl/6 mice and syngeneic TC-1 tumors expressing HPV16 E6/E7. In this model, the HPV antigens are neo-antigens, against which no central tolerance exists. The second model involves mice transgenic for the proto-oncogen neu and syngeneic mouse mammary carcinoma (MMC cells. In this model tolerance to Neu involves both central and peripheral mechanisms. Anti-CTLA4 delivery as a protein or expression from gene-modified tumor cells were therapeutically efficacious in the non-tolerized TC-1 tumor model, but had no effect in the MMC-model. We also used the two tumor models to test an immuno-gene therapy approach for anti-CTLA4. Recently, we used an approach based on hematopoietic stem cells (HSC to deliver the relaxin gene to tumors and showed that this approach facilitates pre-existing anti-tumor T-cells to control tumor growth in the MMC tumor model. However, unexpectedly, when used for anti-CTLA4 gene delivery in this study, the HSC-based approach was therapeutically detrimental in both the TC-1 and MMC models. Anti-CTLA4 expression in these models resulted in an increase in the number of intratumoral CD1d+ NKT cells and in the expression of TGF-β1. At the same time, levels of pro-inflammatory cytokines and chemokines, which potentially can support anti-tumor T-cell responses, were lower in tumors of mice that received anti-CTLA4-HSC therapy. The differences in outcomes between the tolerized and non-tolerized models also provide a potential explanation for the low efficacy

Selection and characterizations of radiation-induced salinity-tolerant lines in rice

International Nuclear Information System (INIS)

Lee, I.S.; Kim, D.S.; Lee, S.J.; Song, H.S.; Lim, Y.P.; Lee, Y.I.

2003-01-01

NaCl tolerant cell lines were selected from irradiated callus, which were generated from seed cultures. M 1 -regenerates were obtained from the salt-tolerant callus cultured on the auxin-free medium for 30 days. Some regenerants were more tolerant than the parent variety (Dongjinbyeo) on a medium containing 0.75 % NaCl. Seeds (M 3 5,000 lines) derived from M 2 lines were grown to the 3 leaf stage. M 3 lines were soaked with a 0.75 % salt solution for 3 weeks and 350 salt-tolerant genotypes were selected. Among the M 3 350 lines, forty tolerant lines were selected from a saline field (10~14 mS) near the sea coast. Of the forty lines, two lines (18-1 and 50-1) showed more improved plant height, panicle length, tillering number, spikelet number and yield than those of the original variety. Thirty primers were screened and two RAPD markers were identified, which appeared in both the salt-tolerant lines (18-1 and 50-1). From DNA-hybridization experiments, it appeared that the fragment arose from the middle-repetitive copy sequences. The transcript involved in the marker showed a higher expression in the salt-tolerant lines than the sensitive lines. The salt-tolerant lines would be useful as a resource for salt-tolerant breeding. (author)

Freezing tolerance of ectomycorrhizal fungi in pure culture.

Science.gov (United States)

Lehto, Tarja; Brosinsky, Arlena; Heinonen-Tanski, Helvi; Repo, Tapani

2008-10-01

The ability to survive freezing and thawing is a key factor for the existence of life forms in large parts of the world. However, little is known about the freezing tolerance of mycorrhizal fungi and their role in the freezing tolerance of mycorrhizas. Threshold temperatures for the survival of these fungi have not been assessed experimentally. We grew isolates of Suillus luteus, Suillus variegatus, Laccaria laccata, and Hebeloma sp. in liquid culture at room temperature. Subsequently, we exposed samples to a series of temperatures between +5 degrees C and -48 degrees C. Relative electrolyte leakage (REL) and re-growth measurements were used to assess the damage. The REL test indicated that the lethal temperature for 50% of samples (LT(50)) was between -8.3 degrees C and -13.5 degrees C. However, in the re-growth experiment, all isolates resumed growth after exposure to -8 degrees C and higher temperatures. As many as 64% of L. laccata samples but only 11% in S. variegatus survived -48 degrees C. There was no growth of Hebeloma and S. luteus after exposure to -48 degrees C, but part of their samples survived -30 degrees C. The fungi tolerated lower temperatures than was expected on the basis of earlier studies on fine roots of ectomycorrhizal trees. The most likely freezing tolerance mechanism here is tolerance to apoplastic freezing and the concomitant intracellular dehydration with consequent concentrating of cryoprotectant substances in cells. Studying the properties of fungi in isolation promotes the understanding of the role of the different partners of the mycorrhizal symbiosis in the freezing tolerance.

TED: A Tolerant Edit Distance for segmentation evaluation.

Science.gov (United States)

Funke, Jan; Klein, Jonas; Moreno-Noguer, Francesc; Cardona, Albert; Cook, Matthew

2017-02-15

In this paper, we present a novel error measure to compare a computer-generated segmentation of images or volumes against ground truth. This measure, which we call Tolerant Edit Distance (TED), is motivated by two observations that we usually encounter in biomedical image processing: (1) Some errors, like small boundary shifts, are tolerable in practice. Which errors are tolerable is application dependent and should be explicitly expressible in the measure. (2) Non-tolerable errors have to be corrected manually. The effort needed to do so should be reflected by the error measure. Our measure is the minimal weighted sum of split and merge operations to apply to one segmentation such that it resembles another segmentation within specified tolerance bounds. This is in contrast to other commonly used measures like Rand index or variation of information, which integrate small, but tolerable, differences. Additionally, the TED provides intuitive numbers and allows the localization and classification of errors in images or volumes. We demonstrate the applicability of the TED on 3D segmentations of neurons in electron microscopy images where topological correctness is arguable more important than exact boundary locations. Furthermore, we show that the TED is not just limited to evaluation tasks. We use it as the loss function in a max-margin learning framework to find parameters of an automatic neuron segmentation algorithm. We show that training to minimize the TED, i.e., to minimize crucial errors, leads to higher segmentation accuracy compared to other learning methods. Copyright © 2016. Published by Elsevier Inc.

Ammonium and nitrate tolerance in lichens

Energy Technology Data Exchange (ETDEWEB)

Hauck, Markus, E-mail: mhauck@gwdg.d [Department of Plant Ecology, Albrecht von Haller Institute of Plant Sciences, University of Goettingen, Untere Karspuele 2, 37073 Goettingen (Germany)

2010-05-15

Since lichens lack roots and take up water, solutes and gases over the entire thallus surface, these organisms respond more sensitively to changes in atmospheric purity than vascular plants. After centuries where effects of sulphur dioxide and acidity were in the focus of research on atmospheric chemistry and lichens, recently the globally increased levels of ammonia and nitrate increasingly affect lichen vegetation and gave rise to intense research on the tolerance of lichens to nitrogen pollution. The present paper discusses the main findings on the uptake of ammonia and nitrate in the lichen symbiosis and to the tolerance of lichens to eutrophication. Ammonia and nitrate are both efficiently taken up under ambient conditions. The tolerance to high nitrogen levels depends, among others, on the capability of the photobiont to provide sufficient amounts of carbon skeletons for ammonia assimilation. Lowly productive lichens are apparently predisposed to be sensitive to excess nitrogen. - Eutrophication has become a global threat for lichen diversity.

Evaluation of wheat genotypes for salinity tolerance using physiological indices as screening tool

International Nuclear Information System (INIS)

Zafar, S.; Niaz, M.; Kausar, A.

2015-01-01

Salinity is a major threat to world food security, to ensure future food needs of an increasing world population, development of salt tolerant crop varieties are necessary. Effective screening techniques for salinity tolerance would be beneficial in developing high yielding and salt tolerant wheat varieties. In the present study, an attempt for rapid screening of wheat genotypes for salt tolerance was made. Twenty wheat genotypes were evaluated for salinity tolerance under laboratory/green-house conditions using different physiological indices like germination stress tolerance index (GSI), shoot length stress tolerance index (SLSI), root length stress tolerance index (RLSI) , shoot dry biomass stress tolerance index (SDSI). The data was pooled together to different multivariate techniques including correlation and cluster analysis to assess the diversity for salt tolerance in wheat genotypes. Highly significant and positive correlations were found between GSI, SDWSI and RDWSI. Cluster analysis classified 20 genotypes into three divergent groups. The members of first cluster (Abadgharr, Bhakkar-2000, Chakwal-86, Kiran-95, LU-26-S, Margalla-99, Marvi Pak-81, Sarsabaz) exhibited adequate degree of salt tolerance on the basis of various physiological stress tolerance indices, whereas, cluster-2 included genotypes (Bhattai, Pasban-90, Shafaq-2006, Soghat-90) with medium level of salt tolerance and cluster-3 consisted of wheat genotypes (Inqilab-91, Iqbal-2000, Kohistan-97, PARI-73, Punjab-90, Sehar-2006 and Uqab-6) with lower level of salt tolerance and did not perform upto the mark. On the basis of results and scores obtained, indicated that physiological indices can be used as a selection tool for salinity tolerance in wheat. (author)

Effect of aging and oral tolerance on dendritic cell function.

Science.gov (United States)

Simioni, P U; Fernandes, L G R; Gabriel, D L; Tamashiro, W M S C

2010-01-01

Oral tolerance can be induced in some mouse strains by gavage or spontaneous ingestion of dietary antigens. In the present study, we determined the influence of aging and oral tolerance on the secretion of co-stimulatory molecules by dendritic cells (DC), and on the ability of DC to induce proliferation and cytokine secretion by naive T cells from BALB/c and OVA transgenic (DO11.10) mice. We observed that oral tolerance could be induced in BALB/c mice (N = 5 in each group) of all ages (8, 20, 40, 60, and 80 weeks old), although a decline in specific antibody levels was observed in the sera of both tolerized and immunized mice with advancing age (40 to 80 weeks old). DC obtained from young, adult and middle-aged (8, 20, and 40 weeks old) tolerized mice were less efficient (65, 17 and 20%, respectively) than DC from immunized mice (P stimulating IFN-g, IL-4 and IL-10 production. However, TGF-beta levels were significantly elevated in co-cultures carried out with DC from tolerant mice (P production (P oral tolerance in BALB/c mice, but reduces DC functions, probably due to the decline of the expression of the CD86 surface marker.

[Identification and function test of an alkali-tolerant denitrifying bacterium].

Science.gov (United States)

Wang, Ru; Zheng, Ping; Li, Wei; Chen, Hui; Chen, Tingting; Ghulam, Abbas

2013-04-04

We obtained an alkali-tolerant denitrifying bacterium, and determined its denitrifying activity and alkali-tolerance. An alkali-tolerant denitrifying bacterial strain was obtained by isolation and purification. We identified the bacterial strain by morphological observation, physiological test and 16S rRNA analysis. We determined the denitrifying activity and alkali-tolerance by effects of initial nitrate concentration and initial pH on denitrification. An alkali-tolerant denitrifier strain R9 was isolated from the lab-scale high-rate denitrifying reactor, and it was identified as Diaphorobater nitroreducens. The strain R9 grew heterotrophically with methanol as the electron donor and nitrate as the electron acceptor. The nitrate conversion was 93.25% when strain R9 was cultivated for 288 h with initial nitrate concentration 50 mg/L and initial pH 9.0. The denitrification activity could be inhibited at high nitrate concentration with a half inhibition constant of 202.73 mg N/L. Strain R9 showed a good alkali tolerance with the nitrate removal rate at pH 11.0 remained 86% of that at pH 9.0. Strain R9 was identified as Diaphorobater nitroreducens, and it was an alkali-tolerant denitrifying bacterium with optimum pH value of 9.0.

A Framework-Based Approach for Fault-Tolerant Service Robots

Directory of Open Access Journals (Sweden)

Heejune Ahn

2012-11-01

Full Text Available Recently the component-based approach has become a major trend in intelligent service robot development due to its reusability and productivity. The framework in a component-based system should provide essential services for application components. However, to our knowledge the existing robot frameworks do not yet support fault tolerance service. Moreover, it is often believed that faults can be handled only at the application level. In this paper, by extending the robot framework with the fault tolerance function, we argue that the framework-based fault tolerance approach is feasible and even has many benefits, including that: 1 the system integrators can build fault tolerance applications from non-fault-aware components; 2 the constraints of the components and the operating environment can be considered at the time of integration, which – cannot be anticipated eaily at the time of component development; 3 consistency in system reliability can be obtained even in spite of diverse application component sources. In the proposed construction, we build XML rule files defining the rules for probing and determining the fault conditions of each component, contamination cases from a faulty component, and the possible recovery and safety methods. The rule files are established by a system integrator and the fault manager in the framework controls the fault tolerance process according to the rules. We demonstrate that the fault-tolerant framework can incorporate widely accepted fault tolerance techniques. The effectiveness and real-time performance of the framework-based approach and its techniques are examined by testing an autonomous mobile robot in typical fault scenarios.

Heat tolerance in wheat

DEFF Research Database (Denmark)

Sharma, Dew Kumari

As a consequence of global climate change, heat stress together with other abiotic stresses will remain an important determinant of future food security. Wheat (Triticum aestivum L.) is the third most important crop of the world feeding one third of the world population. Being a crop of temperate...... climate, wheat is sensitive to heat stress. We need to understand how our crops will perform in these changing climatic conditions and how we can develop varieties, which are more tolerant. The PhD study focussed on understanding heat tolerance in wheat with a combined approach of plant physiology...... and quantitative genetics in particular, plant phenotyping based quantitative trait loci (QTL) discovery for a physiological trait under heat stress. Chlorophyll a fluorescence trait, Fv/Fm was used as a phenotyping tool, as it reflects the effect of heat stress on maximum photochemical efficiency of photosystem...

Dendritic cells in oral tolerance in the gut.

Science.gov (United States)

Rescigno, Maria

2011-09-01

Oral tolerance is a process that allows generation of systemic unresponsiveness to food antigens. Hence if the same antigen is introduced systemically even under immunogenic conditions it does not induce immune responsiveness. Dendritic cells (DCs) have been identified as essential players in this process. DCs in the gut are located in a strategic position as they can interact directly with luminal antigens or indirectly after their transcytosis across epithelial cells. DCs can then migrate to associated lymphoid tissues to induce tolerance. Antigen presenting cells in the gut are specialized in function and have divided their labour so that there are cells capable to migrate to the draining mesenteric lymph node for induction of T regulatory cells, while other subsets are resident and are required to enforce tolerance locally in the gut after food antigen exposure. In this review, I shall summarize the characteristics of antigen presenting cells in the gut and their involvement in oral tolerance induction. In addition, I will also emphasize that tolerance to food allergens may be contributed by plasmacytoid DCs in the liver that participate to the elimination or anergy of allergen-specific CD8 T cells. Hence specialized functions are associated to different subsets of antigen presenting cells and different organs. © 2011 Blackwell Publishing Ltd.

Tolerance of sexual harassment: a laboratory paradigm.

Science.gov (United States)

Angelone, David J; Mitchell, Damon; Carola, Kara

2009-12-01

The present study attempted to develop a laboratory analogue for the study of tolerance for sexual harassment by using an online speed-dating paradigm. In that context, the relation between participants' sexual harassment attitudes, perpetrator attractiveness, perpetrator status, and perceived dating potential of the perpetrator were examined as factors influencing participants' tolerance of sexually harassing behavior. Participants were 128 female college students from a small northeastern public university. Results indicated that attractiveness, high social status, and attitudinal beliefs about sexual harassment were all predictive of tolerance for sexual harassment, providing preliminary support for the validity of this paradigm. In addition, participants' self reported likelihood to date a bogus male dating candidate was also predictive of tolerance for sexual harassment, over and above the aforementioned variables, suggesting that dating potential can play a role in perceptions of sexual harassment. Further, this experiment demonstrated that perceptions of sexual harassment can be assessed using the in vivo measurement of behavior. In addition, using an online environment not only provides a contemporary spin and adds a greater degree of external validity compared to other sexual harassment analogues, it also reduces any risk of potential physical sexual contact for participants.

Modular, Fault-Tolerant Electronics Supporting Space Exploration, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Modern electronic systems tolerate only as many point failures as there are redundant system copies, using mere macro-scale redundancy. Fault Tolerant Electronics...

Tolerance of Septoria nodorum Berk. in wheat: inheritance and potential in breeding

International Nuclear Information System (INIS)

Fossati, A.; Broennimann, A.

1976-01-01