WorldWideScience

Sample records for force base georgia

  1. Installation Restoration Program, Phase II - Confirmation/Quantification Stage I, Moody Air Force Base, Georgia.

    Science.gov (United States)

    1985-12-01

    ABBREVIATIONS, AND UNITS OF MESUREMENT ~~(Page I of 2) "’ 2 % W. -* AFB Air Force Base ATC Air Training Command I ASTM American Society for Testing Materials...following emergency phone numbers should be available * 1 on-site: I. Ambulance or medical assistance, 2. Base fire department (or other if off-site), and

  2. Installation Restoration Program Records Search for Dobbins Air Force Base, Georgia

    Science.gov (United States)

    1982-04-01

    Combat Support Group, Air Force Reserve, is 3 currently the host unit at Dobbins AFB. I 3 II - 1 CC ~L/LLI 1’ 1/ LULLI (~~s’ c * .00 I 3- Lockheed...Services Center (AFESC), Engineering-Science (ES) and CH2 M Hill. The basis for this model was a system developed for EPA by JB Associates of MLean

  3. Environmental Assessment of Stone Road Widening at Mission Lake Moody Air Force Base, Georgia

    Science.gov (United States)

    2012-01-01

    areolata) in the herbaceous layer (Moody AFB 2007) Historically, the upland areas of Moody AFB were once dominated by longleaf pine (Pinus...palustris) forests, with mesic longleaf pine savannas located in the main base area (Moody AFB 2008). Currently, pine species including loblolly (Pinus...organic matter content, but has high potential for slash pine and loblolly pine .  Olustee sand (Oa) occurs as a narrow strip along the western edge of

  4. Georgia-Based Avondale May Close All Mills

    Institute of Scientific and Technical Information of China (English)

    Don; Theeuwes

    2006-01-01

    Georgia-based Avondale Mills said it is considering closing all its plants because of increased foreign competition and a train wreck more than a year ago that released a cloud of corrosive chlorine gas just outside the gates of its Graniteville plant, killing nine people.

  5. Updated Fiscal Impact Analysis, Naval Submarine Base, Kings Bay, Georgia

    Science.gov (United States)

    1986-12-01

    It also uses the grade structure of the inmigrating Navy personnel to 4-3- calculate the salaries that will be brought to the area. The population and...of inmigrants who wish to work. The FIA model treats the labor market as a dynamic condition that varies with base load-up and multiplier changes...Florida and Georgia (see the map on Figure 1-1). The selection of these counties was based on preliminary information about where the inmigrating

  6. "Making the Difficult Choice": Understanding Georgia's Test-Based Grade Retention Policy in Reading

    Science.gov (United States)

    Huddleston, Andrew P.

    2015-01-01

    The author uses Bourdieu's concepts of field, capital, and habitus to analyze how students, parents, teachers, and administrators are responding to Georgia's test-based grade retention policy in reading at one Georgia elementary school. In this multiple case study, the author interviewed, observed, and collected documents regarding ten fifth…

  7. Hanscom Air Force Base

    Data.gov (United States)

    Federal Laboratory Consortium — MIT Lincoln Laboratory occupies 75 acres (20 acres of which are MIT property) on the eastern perimeter of Hanscom Air Force Base, which is at the nexus of Lexington,...

  8. Severe summer heat waves over Georgia: trends, patterns and driving forces

    Directory of Open Access Journals (Sweden)

    I. Keggenhoff

    2015-11-01

    Full Text Available During the last 50 years Georgia experienced a rising number of severe summer heat waves causing increasing heat-health impacts. In this study, the 10 most severe heat waves between 1961 and 2010 and recent changes in heat wave characteristics have been detected from 22 homogenized temperature minimum and maximum series using the Excess Heat Factor (EHF. A composite and Canonical Correlation Analysis (CCA have been performed to study summer heat wave patterns and their relationships to the selected predictors: mean Sea Level Pressure (SLP, Geopotential Height at 500 mb (Z500, Sea Surface Temperature (SST, Zonal (u-wind500 and Meridional Wind at 500 mb (v-wind500, Vertical Velocity at 500 mb (O500, Outgoing Longwave Radiation (OLR, Relative Humidity (RH500, Precipitation (RR and Soil Moisture (SM. Most severe heat events during the last 50 years are identified in 2007, 2006 and 1998. Largest significant trend magnitudes for the number, intensity and duration of low and high-impact heat waves have been found during the last 30 years. Significant changes in the heat wave predictors reveal that all relevant surface and atmospheric patterns contributing to heat waves have been intensified between 1961 and 2010. Composite anomalies and CCA patterns provide evidence of a large anticyclonic blocking pattern over the southern Ural Mountains, which attracts warm air masses from the Southwest, enhances subsidence and surface heating, shifts the African Intertropical Convergence Zone (ITCZ northwards, and causes a northward shift of the subtropical jet. Moreover, pronounced precipitation and soil moisture deficiency throughout Georgia contribute to the heat wave formation and persistence over Georgia. Due to different large- to mesoscale circulation patterns and the local terrain, heat wave effects over Eastern Georgia are dominated by subsidence and surface heating, while convective rainfall and cooling are observed in the West.

  9. Georgia resource assessment project: Institutionalizing LANDSAT and geographic data base techniques

    Science.gov (United States)

    Pierce, R. R.; Rado, B. Q.; Faust, N.

    1981-01-01

    Digital data from LANDSAT for each 1.1-acre cell in Georgia were processed and the land cover conditions were categorized. Several test cases were completed and an operational hardware and software processing capability was established at the Georgia Institute of Technology. The operational capability was developed to process the entire state (60,000 sq. miles and 14 LANDSAT scenes) in a cooperative project between eleven divisions and agencies at the regional, state, and federal levels. Products were developed for State agencies such as in both mapped and statistical formats. A computerized geographical data base was developed for management programs. To a large extent the applications of the data base evolved as users of LANDSAT information requested that other data (i.e., soils, slope, land use, etc.) be made compatible with LANDSAT for management programs. To date, geographic data bases incorporating LANDSAT and other spatial data deal with elements of the municipal solid waste management program, and reservoir management for the Corps of Engineers. LANDSAT data are also being used for applications in wetland, wildlife, and forestry management.

  10. US Air Force Base Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Hourly observations taken by U.S. Air Force personnel at bases in the United States and around the world. Foreign observations concentrated in the Middle East and...

  11. A brucellosis disease control strategy for the Kakheti region of the country of Georgia: an agent-based model.

    Science.gov (United States)

    Havas, K A; Boone, R B; Hill, A E; Salman, M D

    2014-06-01

    Brucellosis has been reported in livestock and humans in the country of Georgia with Brucella melitensis as the most common species causing disease. Georgia lacked sufficient data to assess effectiveness of the various potential control measures utilizing a reliable population-based simulation model of animal-to-human transmission of this infection. Therefore, an agent-based model was built using data from previous studies to evaluate the effect of an animal-level infection control programme on human incidence and sheep flock and cattle herd prevalence of brucellosis in the Kakheti region of Georgia. This model simulated the patterns of interaction of human-animal workers, sheep flocks and cattle herds with various infection control measures and returned population-based data. The model simulates the use of control measures needed for herd and flock prevalence to fall below 2%. As per the model output, shepherds had the greatest disease reduction as a result of the infection control programme. Cattle had the greatest influence on the incidence of human disease. Control strategies should include all susceptible animal species, sheep and cattle, identify the species of brucellosis present in the cattle population and should be conducted at the municipality level. This approach can be considered as a model to other countries and regions when assessment of control strategies is needed but data are scattered.

  12. Predicting Successful Aging in a Population-Based Sample of Georgia Centenarians

    Directory of Open Access Journals (Sweden)

    Jonathan Arnold

    2010-01-01

    Full Text Available Used a population-based sample (Georgia Centenarian Study, GCS, to determine proportions of centenarians reaching 100 years as (1 survivors (43% of chronic diseases first experienced between 0–80 years of age, (2 delayers (36% with chronic diseases first experienced between 80–98 years of age, or (3 escapers (17% with chronic diseases only at 98 years of age or older. Diseases fall into two morbidity profiles of 11 chronic diseases; one including cardiovascular disease, cancer, anemia, and osteoporosis, and another including dementia. Centenarians at risk for cancer in their lifetime tended to be escapers (73%, while those at risk for cardiovascular disease tended to be survivors (24%, delayers (39%, or escapers (32%. Approximately half (43% of the centenarians did not experience dementia. Psychiatric disorders were positively associated with dementia, but prevalence of depression, anxiety, and psychoses did not differ significantly between centenarians and an octogenarian control group. However, centenarians were higher on the Geriatric Depression Scale (GDS than octogenarians. Consistent with our model of developmental adaptation in aging, distal life events contribute to predicting survivorship outcome in which health status as survivor, delayer, or escaper appears as adaptation variables late in life.

  13. Predicting successful aging in a population-based sample of georgia centenarians.

    Science.gov (United States)

    Arnold, Jonathan; Dai, Jianliang; Nahapetyan, Lusine; Arte, Ankit; Johnson, Mary Ann; Hausman, Dorothy; Rodgers, Willard L; Hensley, Robert; Martin, Peter; Macdonald, Maurice; Davey, Adam; Siegler, Ilene C; Jazwinski, S Michal; Poon, Leonard W

    2010-01-01

    Used a population-based sample (Georgia Centenarian Study, GCS), to determine proportions of centenarians reaching 100 years as (1) survivors (43%) of chronic diseases first experienced between 0-80 years of age, (2) delayers (36%) with chronic diseases first experienced between 80-98 years of age, or (3) escapers (17%) with chronic diseases only at 98 years of age or older. Diseases fall into two morbidity profiles of 11 chronic diseases; one including cardiovascular disease, cancer, anemia, and osteoporosis, and another including dementia. Centenarians at risk for cancer in their lifetime tended to be escapers (73%), while those at risk for cardiovascular disease tended to be survivors (24%), delayers (39%), or escapers (32%). Approximately half (43%) of the centenarians did not experience dementia. Psychiatric disorders were positively associated with dementia, but prevalence of depression, anxiety, and psychoses did not differ significantly between centenarians and an octogenarian control group. However, centenarians were higher on the Geriatric Depression Scale (GDS) than octogenarians. Consistent with our model of developmental adaptation in aging, distal life events contribute to predicting survivorship outcome in which health status as survivor, delayer, or escaper appears as adaptation variables late in life.

  14. Economic Model Cost-Satisfaction in Inclusive Education. Based on Research Made in Georgia

    Science.gov (United States)

    Mantaluta, Ovidiu; Rukhadze, Nino

    2008-01-01

    This research comprises a brief analysis of the economic model design, projected for poor countries, where complex assessments of the health status, education outcomes and motivation for children with disabilities are impossible to be done; is possible to be applied on a national scale in Georgia, if the actual government has the necessary…

  15. Wind Power in Georgia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    opportunity Screening eight sites identified in the Wind Atlas of Georgia (2004) based on a preliminary assessment of the wind power potential, feasibility and construction costs of each site, points to Skra as the most feasible area for pilot development of wind power. The Skra site in Gori/Kareli regions has good (above 7 m/s at 100m) and steady wind resources, minimal land-use and environmental conflicts and high accessibility. An 80m wind measurement mast has recently been put up on the site by a Georgian company. The Skra site is estimated to potentially hold up to 35 3MW turbines (90m rotor diameter) or 45 2MW turbines (80m rotor diameter). The total capacity of the wind farm would thus be 105MW or 90MW respectively. A preliminary estimation for the annual energy production of the wind farm using 2,500 full-load-hours, gives production estimations of 260 GWh for a 105MW and 225 GWh for a 90MW wind farm on the site. Investment cost of the wind farm is estimated to be roughly 1.5 MEuro/MW, which amounts to 158 MEuro for a 105MW farm and 135 MEuro for a 90 MW farm. Several stakeholders in Georgia have expressed interest in using second hand turbines in order to reduce investment costs. Most available used turbines on the market are of sizes less than 2MW and the prize vary significantly depending especially on the capacity, age and make of the turbine. Other interesting sites in Georgia to explore further with an aim for wind power development include Chorokhi, Kutaisi, Samgori and Yagludja.(auth)

  16. Cost-Effectiveness Analysis of the Residential Provisions of the 2015 IECC for Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Zachary T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poehlman, Eric A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-15

    The 2015 IECC provides cost-effective savings for residential buildings in Georgia. Moving to the 2015 IECC from the 2011 Georgia State Code base code is cost-effective for residential buildings in all climate zones in Georgia.

  17. Prevalence of cluster headache in the Republic of Georgia: results of a population-based study and methodological considerations

    DEFF Research Database (Denmark)

    Katsarava, Z; Dzagnidze, A; Kukava, M

    2009-01-01

    We present a study of the general-population prevalence of cluster headache in the Republic of Georgia and discuss the advantages and challenges of different methodological approaches. In a community-based survey, specially trained medical residents visited 500 adjacent households in the capital...... with possible cluster headache, who were then personally interviewed by one of two headache-experienced neurologists. Cluster headache was confirmed in one subject. The prevalence of cluster headache was therefore estimated to be 87/100,000 (95% confidence interval

  18. The Successes and Failures of Military Occupation in Atlanta, Georgia, 1865-1871

    Science.gov (United States)

    2017-06-09

    a massive reduction in force, and mission creep, as it facilitated a volatile transition from a slave-based economy to a wage-based one. This paper...force, and mission creep, as it facilitated a volatile transition from a slave-based economy to a wage-based one. This paper examines reports from...Reconstruction in Georgia: Economic, Social , Political 1865-1872 (New York: The Columbia University Press, 1915), 23. 5 Arthur R. Taylor, “From the

  19. Health research capacity building in Georgia: a case-based needs assessment.

    Science.gov (United States)

    Squires, A; Chitashvili, T; Djibuti, M; Ridge, L; Chyun, D

    2017-06-01

    Research capacity building in the health sciences in low- and middle-income countries (LMICs) has typically focused on bench-science capacity, but research examining health service delivery and health workforce is equally necessary to determine the best ways to deliver care. The Republic of Georgia, formerly a part of the Soviet Union, has multiple issues within its healthcare system that would benefit from expended research capacity, but the current research environment needs to be explored prior to examining research-focused activities. The purpose of this project was to conduct a needs assessment focused on developing research capacity in the Republic of Georgia with an emphasis on workforce and network development. A case study approach guided by a needs assessment format. We conducted in-country, informal, semi-structured interviews in English with key informants and focus groups with faculty, students, and representatives of local non-governmental organizations. Purposive and snowball sampling approaches were used to recruit participants, with key informant interviews scheduled prior to arrival in country. Documents relevant to research capacity building were also included. Interview results were coded via content analysis. Final results were organized into a SWOT (strengths, weaknesses, opportunities, threat) analysis format, with the report shared with participants. There is widespread interest among students and faculty in Georgia around building research capacity. Lack of funding was identified by many informants as a barrier to research. Many critical research skills, such as proposal development, qualitative research skills, and statistical analysis, were reported as very limited. Participants expressed concerns about the ethics of research, with some suggesting that research is undertaken to punish or 'expose' subjects. However, students and faculty are highly motivated to improve their skills, are open to a variety of learning modalities, and have

  20. Vision-based measurement of microassembly forces

    Science.gov (United States)

    Anis, Y. H.; Mills, J. K.; Cleghorn, W. L.

    2006-08-01

    This work describes a vision-based force sensing method for measuring microforces acting upon the jaws of passive, compliant microgrippers, used to construct 3D microstructures. The importance of jaw force measurement during microassembly is to confirm that the microgripper-micropart makes a successful grasp and to protect the microparts and microgripper from excessive forces which may lead to damage during the assembly process. Finite-element analysis of the microgripper is performed to determine the relation between the displacement and the resultant forces of its jaw. The resulting nearly linear force-displacement relationship is fitted to a first-degree equation. A mathematical model of the microgripper system validated this force-displacement relation. The proposed vision-based gripper force measurement techniques determine the deflections of the microgripper jaws during the microassembly process. The deflections in the gripper jaws are measured during the microassembly processes through computation of the relative displacements of the right and left microgripper jaws with respect to the microgripper base. Two approaches are proposed. The first approach uses pattern identification to measure these relative displacements. Two-dimensional pattern identification is performed using normalized cross-correlation to estimate the degree to which the image and pattern are correlated. The second approach uses object recognition and image processing methods, such as zero-crossing Laplacian of Gaussian edge detection and region filling. Experiments performed confirm the success of both approaches in measuring the microgripper jaw deflections and therefore the assembly forces.

  1. Force transducers based on the stress dependence of coercive force

    Science.gov (United States)

    Garshelis, I. J.

    1993-05-01

    An alternative measurement regime for magnetoelastic force transducers, based on variations in coercive field, is described. Hc is shown to be more directly related to the primary magnetic influence of stress, namely, the orientation of effective anisotropy, than conventionally used magnetization related parameters. The stress dependence of Hc is shown to generally reflect opposing factors associated with rotational and wall displacement magnetization reversal processes. In materials wherein Hc≪K/Ms wall motion dominates and if the product of λs/K and yield stress is high enough, large monotonic reductions of Hc with positive (tensile) stress are shown to be possible. A more complex variation of Hc with increasing compression is similarly expected. Experimental results from a transducer having an 18% Ni maraging steel core support these expectations.

  2. Construction of Explosive Ordnance Disposal Facility Moody Air Force Base, Georgia Environmental Assessment

    Science.gov (United States)

    2008-07-01

    contaminated with toxic and hazardous substances, low-level radioactive materials, 20 petroleum, oils , lubricants, and other pollutants and contaminants...forests usually have a well- developed lower stratum of vegetation that includes tree ferns, small palms , shrubs, and herbaceous plants. Lianas and...catastrophic wildfire or deforestation activity (natural or anthropogenic). Under natural conditions, lightning- caused summer fires were an

  3. Environmental Assessment Addressing the Expansion of Sortie-Operations at Moody Air Force Base, Georgia

    Science.gov (United States)

    2012-08-01

    airplanes flew 1,000 feet above them, indicating a fright reaction. Other observers have noted a variety of reactions by grizzlies to aircraft, suggesting...proposed action is "not likely to adversely affect" federally protected species. We appreciate the opportunity to comment during the planning stages

  4. Installation Restoration Program. Phase 2. Confirmation/Quantification Stage 2, Moody Air Force Base, Georgia

    Science.gov (United States)

    1988-11-01

    Selenium .004 <.01 <.01 <.01 .01 Strontium .086 -- - -5.0 Zinc .021 <.05 <.05 <.05 5.0 Silica as SiO 2 27 37.6 36.0 33.2 - Aluminum .026 - - - - Iron...Air deodorant Agricultural chemicals 1,l-Dichloroethane Cleaning solvent and degreaser Laboratory solvent 1,2-Dichloroethane Solvent Laboratory solvent

  5. Final Environmental Assessment for the Military Housing Privatization Initiative (MHPI), Moody Air Force Base, Georgia

    Science.gov (United States)

    2014-03-01

    Leconte’s wild indigo Baptisia lecontei G4?/S1 No Hop sedge Carex lupulifomis G4?/S1 No Tracy’s dew threads Drosera tracyi G3G4/S1 No...Green fly orchid Epidendrum magnoliae U G4/S3 Yes Southern umbrella sedge Fuirena scirpoidea G5/S1 No Final – Moody AFB MHPI Environmental...aristata ( Sedge ) approx. 2.0 mi, SW of site GA Macrochdy~ temmim;kil (Alligator Snapping Turtle) approx. 1.0 mi. SE of site f’teronotropis mP.tallicus

  6. Civil Engineer Contingency Training Moody Air Force Base, Georgia Environmental Assessment

    Science.gov (United States)

    2007-03-01

    hillsides. Stilson soils occur on low uplands. Most of the cultivated land in Lowndes County is on Tifton and Fuquay soils. Corn , tobacco, soybeans...americanus), ruby-throated hummingbird (Archilochus colubris), woodpeckers ( downy (Picoides pubescens), red-bellied (Melanerpes carolinus), flicker

  7. Georgia - Energy Rehabilitation

    Data.gov (United States)

    Millennium Challenge Corporation — Gustavson Associates was retained by Millennium Challenge Georgia (MCG) to prepare a model to calculate the economic rate of return (ERR) for rehabilitation work...

  8. An experience in using the world reference base for soil resources for the soils of western Georgia

    Science.gov (United States)

    Urushadze, T. F.; Kvrivishvili, T. O.; Sanadze, E. V.

    2014-08-01

    New and previously published data on the soils of western Georgia are generalized, and traditional soil names are correlated with the units of the World Reference Base for Soil Resources. It is argued that krasnozems (red ferrallitic soils) can be attributed to the group of Nitisols (the soils characterized by intense weathering (ferralization) and having shiny ped faces in the nitic horizon); yellow and yellow-brown soils (zheltozems), to the group of Luvisols (the soils with relatively high adsorption capacity in the eluvial horizons and with the horizon of the illuvial accumulation of clay); yellow-podzolic (zheltozem-podzolic) soils, to Alisols (slightly acid soils with the low adsorption capacity, poor aggregation of the upper horizons, low-activity (kaolinite) clay, and with the horizon of clay accumulation (argic horizon)); brown forest soils, to Cambisols (the soils with the cambic horizon characterized by some alteration of the lithogenic texture and structure into the pedogenic texture and structure); and mountainous forest-meadow and meadow soils, to Umbrisols (the soils with the dark-colored unsaturated umbric horizon).

  9. Comparison of the Hazard Mapping System (HMS) fire product to ground-based fire records in Georgia, USA

    Science.gov (United States)

    Hu, Xuefei; Yu, Chao; Tian, Di; Ruminski, Mark; Robertson, Kevin; Waller, Lance A.; Liu, Yang

    2016-03-01

    Biomass burning has a significant and adverse impact on air quality, climate change, and various ecosystems. The Hazard Mapping System (HMS) detects fires using data from multiple satellite sensors in order to maximize its fire detection rate. However, to date, the detection rate of the HMS fire product for small fires has not been well studied, especially using ground-based fire records. This paper utilizes the 2011 fire information compiled from ground observations and burn authorizations in Georgia to assess the comprehensiveness of the HMS active fire product. The results show that detection rates of the hybrid HMS increase substantially by integrating multiple satellite instruments. The detection rate increases dramatically from 3% to 80% with an increase in fire size from less than 0.02 km2 to larger than 2 km2, resulting in detection of approximately 12% of all recorded fires which represent approximately 57% of the total area burned. The spatial pattern of detection rates reveals that grid cells with high detection rates are generally located in areas where large fires occur frequently. The seasonal analysis shows that overall detection rates in winter and spring (12% and 13%, respectively) are higher than those in summer and fall (3% and 6%, respectively), mainly because of higher percentages of large fires (>0.19 km2) that occurred in winter and spring. The land cover analysis shows that detection rates are 2-7 percentage points higher in land cover types that are prone to large fires such as forestland and shrub land.

  10. Updated Fiscal Impact Analysis for the Naval Submarine Base, Kings Bay, Georgia. Technical Appendices

    Science.gov (United States)

    1986-12-01

    any person wishing to enter the labor force. Thus, the only existing labor supply is actually the inflow of spouses of inmigrants who wish to work...The existing labor supply for the Kings Bay expansion is calculated in the model by assuming that 60 percent of the spouses of inmigrants who wish to...work. The existing labor supply for the Kings Bay expansion is calculated in the model by assuming that 60 percent of the spouses of inmigrants from the

  11. Salmonella from gopher tortoises (Gopherus polyphemus) in south Georgia.

    Science.gov (United States)

    Lockhart, J Mitchell; Lee, Gregory; Turco, Jenifer; Chamberlin, Linda

    2008-10-01

    From 2002 to 2006, gopher tortoises (Gopherus polyphemus) were collected at Moody Air Force Base, Lowndes/Lanier counties, Georgia, USA, and opportunistically surveyed for the presence of Salmonella species. Four of 155 (2.6%) cloacal swabs collected from 80 tortoises were positive for the presence of Salmonella enterica, and the following serovars were identified: Give, Hartford, Javiana, and Luciana. Female tortoises (5%) were infected at a rate similar to male tortoises (5%). All isolates were obtained from adult tortoises (n = 73); subadults (n = 7) were all negative. Each isolated serovar is a potential human pathogen, suggesting appropriate precautions should be emphasized when handling these animals.

  12. Banking Reform in Georgia

    OpenAIRE

    Mercan, Metin

    2006-01-01

    Georgia's banking system restructure began in 1991 when Soviet Union collopsed.This paper tries to compare and constract the performance of banks and banking system between 1999 and 2004 with banks in other transition countries. Although Georgia banking system showed a long processing in banking sector, it is still lags behind other transition countries Central and Eastern Europe. Neverthless.An efficient financial institution and performance will not come without further economic development...

  13. Robins Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, G.P.; Keller, J.M.; Stucky, D.J.; Wahlstrom, R.R.; Larson, L.L.

    1993-10-01

    The US Air Force Materiel Command (AFMC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Robins Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the AFMC Robins AFB facility located approximately 15 miles south of Macon, Georgia. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 13 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative-description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and savings to investment ratio (SIR) of each ERO.

  14. MR compatible strain gauge based force transducer

    NARCIS (Netherlands)

    van Duinen, Hiske; Post, Marijn; Vaartjes, Koen; Hoogduin, Hans; Zijdewind, Inge

    2007-01-01

    In order to evaluate brain activation during motor tasks accurately one must also measure output parameters such as muscle force or muscle activity. Especially in clinical situations where the force output can be compromised by changes at different levels of the motor system, it is essential to stan

  15. MR compatible strain gauge based force transducer

    NARCIS (Netherlands)

    van Duinen, Hiske; Post, Marijn; Vaartjes, Koen; Hoogduin, Hans; Zijdewind, Inge

    2007-01-01

    In order to evaluate brain activation during motor tasks accurately one must also measure output parameters such as muscle force or muscle activity. Especially in clinical situations where the force output can be compromised by changes at different levels of the motor system, it is essential to stan

  16. Lorentz Force Based Satellite Attitude Control

    Science.gov (United States)

    Giri, Dipak Kumar; Sinha, Manoranjan

    2016-07-01

    Since the inception of attitude control of a satellite, various active and passive control strategies have been developed. These include using thrusters, momentum wheels, control moment gyros and magnetic torquers. In this present work, a new technique named Lorentz force based Coulombic actuators for the active control is proposed. This method uses electrostatic charged shells, which interact with the time varying earth's magnetic field to establish a full three axes control of the satellite. It is shown that the proposed actuation mechanism is similar to a satellite actuated by magnetic coils except that the resultant magnetic moment vanishes under two different conditions. The equation for the required charges on the the Coulomb shells attached to the satellite body axes is derived, which is in turn used to find the available control torque for actuating the satellite along the orbit. Stability of the proposed system for very high initial angular velocity and exponential stability about the origin are proved for a proportional-differential control input. Simulations are carried out to show the efficacy of the proposed system for the attitude control of the earth-pointing satellite.

  17. Georgia : Accounting and Auditing

    OpenAIRE

    2007-01-01

    This report provides an assessment of accounting, financial reporting and auditing requirements and practices within the enterprise and financial sectors in Georgia. The report uses International Financial Reporting Standards (IFRS), International Standards on Auditing (ISA) and draws on international experience and good practices in the field of accounting and audit regulation, including in ...

  18. Georgia's Unusual "Electoral College"

    Science.gov (United States)

    Foster, Andrea L.

    2007-01-01

    This article reports a unique partnership between Kennesaw State University and the Georgia state government involving the participation of computer experts in the deployment or electronic voting machines. The effort has received attention in Washington as scientists and government officials search for ways to reform election procedures across the…

  19. My Classroom: Georgia

    Science.gov (United States)

    Baker, Melanie

    2017-01-01

    Khatuna Kharkheli is an English language teacher in the Faculty of Education, Exact, and Natural Sciences at Gori State Teaching University (GSTU) in Gori, Georgia. With her passion for developing innovative and creative lessons and with her commitment to professional development, Ms. Kharkheli works to inspire her students to achieve success both…

  20. Athermalization in atomic force microscope based force spectroscopy using matched microstructure coupling.

    Science.gov (United States)

    Torun, H; Finkler, O; Degertekin, F L

    2009-07-01

    The authors describe a method for athermalization in atomic force microscope (AFM) based force spectroscopy applications using microstructures that thermomechanically match the AFM probes. The method uses a setup where the AFM probe is coupled with the matched structure and the displacements of both structures are read out simultaneously. The matched structure displaces with the AFM probe as temperature changes, thus the force applied to the sample can be kept constant without the need for a separate feedback loop for thermal drift compensation, and the differential signal can be used to cancel the shift in zero-force level of the AFM.

  1. Historical Earthquakes and Active Structure for Georgia

    Science.gov (United States)

    Tsereteli, Nino; Varazanashivli, Otar

    2014-05-01

    Long-term seismic history is an important foundation for reliable assessment of seismic hazard and risk. Therefore, completeness of earthquake catalogues in the longest historical part is very important. Survived historical sources, as well as special researches from the institutes, museums, libraries and archives in Georgia, the Caucasus and the Middle East indicate to high level of seismicity which entailed numerous human casualties and destruction on the territory of Georgia during the historical period. The study and detailed analysis of these original documents and researches have allowed us to create a new catalogue of historical earthquakes of Georgia from 1250 BC to 1900 AD. The method of the study is based on a multidisciplinary approach, i.e. on the joint use of methods of history and paleoseismology, archeoseismology, seismotectonics, geomorphology, etc. We present here a new parametric catalogue of 44 historic earthquakes of Georgia and a full "descriptor" of all the phenomena described in it. Constructed on its basis, the summarized map of the distribution of maximum damage in the historical period (before 1900) on the territory of Georgia clearly shows the main features of the seismic field during this period. In particular, in the axial part and the southern slope of the Greater Caucasus there is a seismic gap, which was filled in 1991 by the strongest earthquake and its aftershocks in Racha. In addition, it is also obvious that very high seismic activity in the central and eastern parts of the Javakheti highland is not described in historical materials and this fact requires further searches of various kinds of sources that contain data about historical earthquakes. We hope that this catalogue will enable to create a new joint (instrumental and historical) parametric earthquake catalogue of Georgia and will serve to assess the real seismic hazard and risk in the country.

  2. Minimum Normal Force Principle Based Quantitive Optimizationof Clamping Forces for Thin Walled Part

    Institute of Scientific and Technical Information of China (English)

    ZHANG Fa-ping; SUN Hou-fang; SHAHID I.Butt

    2008-01-01

    Based on the stability criteria of workpiece-fixture system, quantitative optimization of clamping forces during precise machining process for thin walled part is studied considering the contact condition between wokpiece and locator, the contact mechanical model is achieved ,which is further been used to calculate the entire passive forces acting on the statically undetermined workpiece by means of the force screw theory as well as minimum norm force principle. Furthermore, a new methodology to optimize clamping forces is put forward, on the criteria of keeping the stability of workpiece during cutting process. By this way, the intensity of clamping forces is decreased dramatically, which will be most beneficial for improving the machining quality of thin-walled parts. Finally, a case study is used to support and validate the proposed model.

  3. Circuit Design of Surface Acoustic Wave Based Micro Force Sensor

    Directory of Open Access Journals (Sweden)

    Yuanyuan Li

    2014-01-01

    Full Text Available Pressure sensors are commonly used in industrial production and mechanical system. However, resistance strain, piezoresistive sensor, and ceramic capacitive pressure sensors possess limitations, especially in micro force measurement. A surface acoustic wave (SAW based micro force sensor is designed in this paper, which is based on the theories of wavelet transform, SAW detection, and pierce oscillator circuits. Using lithium niobate as the basal material, a mathematical model is established to analyze the frequency, and a peripheral circuit is designed to measure the micro force. The SAW based micro force sensor is tested to show the reasonable design of detection circuit and the stability of frequency and amplitude.

  4. Linear thermal circulator based on Coriolis forces.

    Science.gov (United States)

    Li, Huanan; Kottos, Tsampikos

    2015-02-01

    We show that the presence of a Coriolis force in a rotating linear lattice imposes a nonreciprocal propagation of the phononic heat carriers. Using this effect we propose the concept of Coriolis linear thermal circulator which can control the circulation of a heat current. A simple model of three coupled harmonic masses on a rotating platform permits us to demonstrate giant circulating rectification effects for moderate values of the angular velocities of the platform.

  5. Libraries in Georgia: MedlinePlus

    Science.gov (United States)

    ... Library → Libraries in Georgia URL of this page: https://medlineplus.gov/libraries/georgia.html Libraries in Georgia ... PRINCE AVENUE ATHENS, GA 30606 706-475-3416 http://www.armc.org/mdx.shtml Atlanta Atlanta Medical ...

  6. Study of Slope Reinforcement Force Based on FLAC

    Institute of Scientific and Technical Information of China (English)

    HUANG Xian-wu; MAO xian-biao; MIAO Xie-xing; CHEN Zhan-qing

    2006-01-01

    A slope will slide if the unbalanced force does not tend to zero when the stability of the slope is analyzed with the help of FLAC. Thus the ultimate reason of slope sliding is the unbalanced force determined by FLAC. The slope will remain stable if the unbalanced force is counterbalanced by a reinforcement force which is produced by a suitable reinforcement method. In this paper, the stability of the slope was analyzed by using FLAC, and the unbalanced force of the slope was obtained through the FISH function in FLAC. According to the equilibrium conditions, the relationship between the reinforcement force and unbalanced force was derived and accordingly the reinforcement force was determined. The reinforcement design was adopted by using pre-stressed anchor bars on the basis of the reinforcement force. An example is used to show that the effect of slope reinforcement based on the reinforcement force is safe and economical. The method doesn't need to suppose a sliding surface to obtain the reinforcement force, and it is also clear in physical meaning. So this method realized the organic unification of the stability analysis and the slope reinforcement

  7. An Optimization-Based Impedance Approach for Robot Force Regulation with Prescribed Force Limits

    Directory of Open Access Journals (Sweden)

    R. de J. Portillo-Vélez

    2015-01-01

    Full Text Available An optimization based approach for the regulation of excessive or insufficient forces at the end-effector level is introduced. The objective is to minimize the interaction force error at the robot end effector, while constraining undesired interaction forces. To that end, a dynamic optimization problem (DOP is formulated considering a dynamic robot impedance model. Penalty functions are considered in the DOP to handle the constraints on the interaction force. The optimization problem is online solved through the gradient flow approach. Convergence properties are presented and the stability is drawn when the force limits are considered in the analysis. The effectiveness of our proposal is validated via experimental results for a robotic grasping task.

  8. Force Based Skill Learning for Robot Tasks in Contact Conditions

    Institute of Scientific and Technical Information of China (English)

    王琴; 梅志千; 张广立; 杨汝清

    2004-01-01

    To acquire human operation skill based on force sense, element contact form (ECF) is proposed to describe contact condition firstly. The skill is modeled as a sequence of discrete ECFs. Since different ECF has different force distribution, a support vector machine classifier is built to identify the contact conditions according to the force signal. Finally, the robot can obtain the skill from the human demonstration.

  9. Force

    CERN Document Server

    Graybill, George

    2007-01-01

    Forces are at work all around us. Discover what a force is, and different kinds of forces that work on contact and at a distance. We use simple language and vocabulary to make this invisible world easy for students to ""see"" and understand. Examine how forces ""add up"" to create the total force on an object, and reinforce concepts and extend learning with sample problems.

  10. Geological hazard monitoring system in Georgia

    Science.gov (United States)

    Gaprindashvili, George

    2017-04-01

    Georgia belongs to one of world's most complex mountainous regions according to the scale and frequency of Geological processes and damage caused to population, farmlands, and Infrastructure facilities. Geological hazards (landslide, debrisflow/mudflow, rockfall, erosion and etc.) are affecting many populated areas, agricultural fields, roads, oil and gas pipes, high-voltage electric power transmission towers, hydraulic structures, and tourist complexes. Landslides occur almost in all geomorphological zones, resulting in wide differentiation in the failure types and mechanisms and in the size-frequency distribution. In Georgia, geological hazards triggered by: 1. Activation of highly intense earthquakes; 2. Meteorological events provoking the disaster processes on the background of global climatic change; 3. Large-scale Human impact on the environment. The prediction and monitoring of Geological Hazards is a very wide theme, which involves different researchers from different spheres. Geological hazard monitoring is essential to prevent and mitigate these hazards. In past years in Georgia several monitoring system, such as Ground-based geodetic techniques, Debrisflow Early Warning System (EWS) were installed on high sensitive landslide and debrisflow areas. This work presents description of Geological hazard monitoring system in Georgia.

  11. Wright-Patterson Air Force Base: The First Century

    Science.gov (United States)

    2015-01-01

    Patterson Swimming Pool Lt Frank Stuart Patterson Pool 1936 Wright Memorial Wilbur and Orville Wright Monument 1940 Thurlow Street Col Thomas L...WRIGHT-PATTERSON AIR FORCE BASE: The First Century ii History Office Air Force Life Cycle...origins to World War I, its aviation history began with the origins of manned, powered, controlled flight. Following their successful proof-of

  12. Transparent and flexible force sensor array based on optical waveguide.

    Science.gov (United States)

    Kim, Youngsung; Park, Suntak; Park, Seung Koo; Yun, Sungryul; Kyung, Ki-Uk; Sun, Kyung

    2012-06-18

    This paper suggests a force sensor array measuring contact force based on intensity change of light transmitted throughout optical waveguide. For transparency and flexibility of the sensor, two soft prepolymers with different refractive index have been developed. The optical waveguide consists of two cladding layers and a core layer. The top cladding layer is designed to allow light scattering at the specific area in response to finger contact. The force sensor shows a distinct tendency that output intensity decreases with input force and measurement range is from 0 to -13.2 dB.

  13. Information-based physics, influence, and forces

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, James Lyons [Department of Physics, University at Albany (SUNY) (United States); Knuth, Kevin H. [Department of Physics, University at Albany (SUNY) and Department of Informatics, University at Albany (SUNY) (United States)

    2015-01-13

    In recent works, Knuth and Bahreyni have demonstrated that the concepts of space and time are emergent in a coarse-grained model of direct particle-particle influence. In addition, Knuth demonstrated that observer-made inferences regarding the free particle, which is defined as a particle that influences others, but is not itself influenced, result in a situation identical to the Feynman checkerboard model of the Dirac equation. This suggests that the same theoretical framework that gives rise to an emergent spacetime is consistent with quantum mechanics. In this paper, we begin to explore the effect of influence on the emergent properties of a particle. This initial study suggests that when a particle is influenced, it is interpreted as accelerating in a manner consistent with special relativity implying that, at least in this situation, influence can be conceived of as a force.

  14. Information-based physics, influence, and forces

    Science.gov (United States)

    Walsh, James Lyons; Knuth, Kevin H.

    2015-01-01

    In recent works, Knuth and Bahreyni have demonstrated that the concepts of space and time are emergent in a coarse-grained model of direct particle-particle influence. In addition, Knuth demonstrated that observer-made inferences regarding the free particle, which is defined as a particle that influences others, but is not itself influenced, result in a situation identical to the Feynman checkerboard model of the Dirac equation. This suggests that the same theoretical framework that gives rise to an emergent spacetime is consistent with quantum mechanics. In this paper, we begin to explore the effect of influence on the emergent properties of a particle. This initial study suggests that when a particle is influenced, it is interpreted as accelerating in a manner consistent with special relativity implying that, at least in this situation, influence can be conceived of as a force.

  15. FORCE FEEDBACK DATAGLOVE BASED ON PNEUMATIC ARTIFICIAL MUSCLES

    Institute of Scientific and Technical Information of China (English)

    BAO Gang; SUN Zhongsheng; WANG Zuwen

    2006-01-01

    An exoskeleton force feedback dataglove is developed, which uses the pneumatic artificial muscles as actuators. On the basis of the simplified hand model, the motion equation is deduced according to the theory of Denavit-Hartenberg. The model of the equivalent contact forces exerted by the object on the finger is proposed. By the principle of virtual work, the static equilibrium of finger is established. The force Jacobian matrix of finger is calculated, and then the joint torques of the finger when grasping objects are obtained. The theory and structure of the force feedback datagolve are introduced. Based on the theory of motion stabilization of four-bar linkage, the flexion angles of joints are measured. The torques on finger joints caused by the output forces of pneumatic artificial muscles are calculated. The output forces of pneumatic artificial muscle, whose values are controlled by its inner pressure, can be calculated by the joint torques ofthe finger when grasping objects. The arms of force, driving torques and the needed output forces of pneumatic muscle are calculated for each joint of the index finger. The criterion of output force of pneumatic muscle is given.

  16. Platform-based Shear Force Sensor

    Directory of Open Access Journals (Sweden)

    Wang Wei-Chih

    2015-01-01

    Full Text Available In this paper, we will present the development of a flexible fiber optic bend loss sensor for the measurement of plantar pressure and shear stress for diabetic patients. The sensor will allow the measurement of shear stress on the foot, which is a critical parameter in studying diabetic foot ulcers. The basic configuration of the optical sensor systems incorporates a mesh that is comprised of two sets of parallel optical waveguide planes; the planes are configured so the parallel rows of waveguides of the top and bottom planes are perpendicular to each other. The planes are sandwiched together creating one sensing sheet. Two-dimensional information is determined by measuring the loss of light from each of the waveguide to map the overall pressure distribution. The shifting of the layers relative to each other produces different patterns of the sensor output, and shear force information is characterized through repeated training of the sensor and analysis of the training data. The latest development and improvement in the sensors design is presented. Fabrication and sensor characterization results will be presented.

  17. National Seismic Network of Georgia

    Science.gov (United States)

    Tumanova, N.; Kakhoberashvili, S.; Omarashvili, V.; Tserodze, M.; Akubardia, D.

    2016-12-01

    Georgia, as a part of the Southern Caucasus, is tectonically active and structurally complex region. It is one of the most active segments of the Alpine-Himalayan collision belt. The deformation and the associated seismicity are due to the continent-continent collision between the Arabian and Eurasian plates. Seismic Monitoring of country and the quality of seismic data is the major tool for the rapid response policy, population safety, basic scientific research and in the end for the sustainable development of the country. National Seismic Network of Georgia has been developing since the end of 19th century. Digital era of the network started from 2003. Recently continuous data streams from 25 stations acquired and analyzed in the real time. Data is combined to calculate rapid location and magnitude for the earthquake. Information for the bigger events (Ml>=3.5) is simultaneously transferred to the website of the monitoring center and to the related governmental agencies. To improve rapid earthquake location and magnitude estimation the seismic network was enhanced by installing additional 7 new stations. Each new station is equipped with coupled Broadband and Strong Motion seismometers and permanent GPS system as well. To select the sites for the 7 new base stations, we used standard network optimization techniques. To choose the optimal sites for new stations we've taken into account geometry of the existed seismic network, topographic conditions of the site. For each site we studied local geology (Vs30 was mandatory for each site), local noise level and seismic vault construction parameters. Due to the country elevation, stations were installed in the high mountains, no accessible in winter due to the heavy snow conditions. To secure online data transmission we used satellite data transmission as well as cell data network coverage from the different local companies. As a result we've already have the improved earthquake location and event magnitudes. We

  18. Anthropogenization in Georgia

    Directory of Open Access Journals (Sweden)

    Nana M. Berdzenishvili

    2012-12-01

    Full Text Available The analysis of towns and natural environment interection shows that creating the most convenient living conditions for the public depends on correct and systematic actions, concerning protection and restoration of all natural components, including clean air preservation, cities planting, water and land resources protection. It should be noted that recultivation activities are unsatisfactory and are held on small scale. Despite there is little farmland per head in Georgia, 3000 hectares of agricultural land, more than half of which is allocated for plough lands and perennial trees is lost due to urbanization and industrialization.

  19. Use of medications by people with chronic fatigue syndrome and healthy persons: a population-based study of fatiguing illness in Georgia

    Directory of Open Access Journals (Sweden)

    Jones James F

    2009-07-01

    Full Text Available Abstract Background Chronic fatigue syndrome (CFS is a debilitating condition of unknown etiology and no definitive pharmacotherapy. Patients are usually prescribed symptomatic treatment or self-medicate. We evaluated prescription and non-prescription drug use among persons with CFS in Georgia and compared it to that in non-fatigued Well controls and also to chronically Unwell individuals not fully meeting criteria for CFS. Methods A population-based, case-control study. To identify persons with possible CFS-like illness and controls, we conducted a random-digit dialing telephone screening of 19,807 Georgia residents, followed by a detailed telephone interview of 5,630 to identify subjects with CFS-like illness, other chronically Unwell, and Well subjects. All those with CFS-like illness (n = 469, a random sample of chronically Unwell subjects (n = 505, and Well individuals (n = 641 who were age-, sex-, race-, and geographically matched to those with CFS-like illness were invited for a clinical evaluation and 783 participated (48% overall response rate. Clinical evaluation identified 113 persons with CFS, 264 Unwell subjects with insufficient symptoms for CFS (named ISF, and 124 Well controls; the remaining 280 subjects had exclusionary medical or psychiatric conditions, and 2 subjects could not be classified. Subjects were asked to bring all medications taken in the past 2 weeks to the clinic where a research nurse viewed and recorded the name and the dose of each medication. Results More than 90% of persons with CFS used at least one drug or supplement within the preceding two weeks. Among users, people with CFS used an average of 5.8 drugs or supplements, compared to 4.1 by ISF and 3.7 by Well controls. Persons with CFS were significantly more likely to use antidepressants, sedatives, muscle relaxants, and anti-acids than either Well controls or the ISF group. In addition, persons with CFS were significantly more likely to use pain

  20. External Force Estimation for Teleoperation Based on Proprioceptive Sensors

    Directory of Open Access Journals (Sweden)

    Enrique del Sol

    2014-03-01

    Full Text Available This paper establishes an approach to external force estimation for telerobotic control in radioactive environments by the use of an identified manipulator model and pressure sensors, without employing a force/torque sensor. The advantages of - and need for - force feedback have been well-established in the field of telerobotics, where electrical and back-drivable manipulators have traditionally been used. This research proposes a methodology employing hydraulic robots for telerobotics tasks based on a model identification scheme. Comparative results of a force sensor and the proposed approach using a hydraulic telemanipulator are presented under different conditions. This approach not only presents a cost effective solution but also a methodology for force estimation in radioactive environments, where the dose rates limit the use of electronic devices such as sensing equipment.

  1. Construction of Open Burning Facility Moody Air Force Base, Georgia Environmental Assessment and Finding of No Significant Impact

    Science.gov (United States)

    2009-01-01

    regeneration (i.e., pine plantations). Surveys were undertaken in 1993-94 to classify natural ecosystems and to identify the presence of protected...indigo snake and the federally threatened flatwoods salamander were conducted in 2002 and 2003-2004, respectively. During the planning and...Additionally, this site is not deemed suitable habitat for flatwoods salamanders because of the lack of suitable ephemeral wetlands or other water resources

  2. Final Environmental Assessment for Continued Personnel Recovery Training Operations Within the Gulf of Mexico WTA Moody Air Force Base, Georgia

    Science.gov (United States)

    2010-06-01

    and lack of a hard shell), their attraction to gelatinous organisms and algae that collect on buoys and buoy lines at or near the surface...community discharges is known to stimulate plankton blooms in closed or semi-closed estuarine systems. The effects on larger embayments are unknown

  3. Installation Restoration Program. Phase 2. Confirmation/Quantification Stage 2, Moody Air Force Base, Georgia. Appendices. Volume 2

    Science.gov (United States)

    1988-11-01

    Time~ (d) NOWs NO. X X >X x 2 oz. plastic DOJC Filter, HS04 40 C 26 ______ K x x x I pt. glass COD ItSJ 4 , 4*C 2B ____ ____ x* x x? 40 ml.vialsC(4) V 4...s) No. x X X x 2 oz. plastic DCC Filter, H’-S0 4 4oC 26 X X X x I pt. glass 01 HS04 , 4"C 2b X- X xt 40 ml. vials (4) 4"C 14 X X X 2 qt. plastic

  4. Improvements to Air Force Strategic Basing Decisions

    Science.gov (United States)

    2016-01-01

    installation’s available capacity for growth in water use, storm water handling, waste management, utility needs, energy production, local air pollutants , and...conditions, such as replacing a more polluting weapon system with a newer, less polluting one. Finally, interviewees argued that NEPA procedures need to be...running through the West Indies to South America and the other through Texas and Central America—composed of land and seaplane bases stretching from CONUS

  5. A force plate based method for the calibration of force/torque sensors.

    Science.gov (United States)

    Faber, Gert S; Chang, Chien-Chi; Kingma, Idsart; Schepers, H Martin; Herber, Sebastiaan; Veltink, Peter H; Dennerlein, Jack T

    2012-04-30

    This study describes a novel calibration method for six-degrees-of-freedom force/torque sensors (FTsensors) using a pre-calibrated force plate (FP) as a reference measuring device. In this calibration method, the FTsensor is rigidly connected to a FP and force/torque data are synchronously recorded while a dynamic functional loading procedure is applied by the researcher. Based on these data an accurate calibration matrix for the FTsensor can easily be obtained via least-squares optimization. Using this calibration method, this study further investigated what loading methods are appropriate for the calibration of FTsensors intended for ambulatory measurement of ground reaction forces (GRFs). Seven different loading methods were compared (e.g., walking, pushing while standing on the FTsensor). Calibration matrices were calculated based on the raw data from the seven loading methods individually and all loading methods combined. Performance of these calibration matrices was subsequently compared in an in situ trial. During the in situ trial, five common work tasks (e.g., walking, manual lifting, pushing) were performed by an experimenter, while standing on the FP wearing a "ForceShoe" with two calibrated FTsensors attached to its sole. Root-mean-square differences (RMSDs) between the FTsensor and FP outcomes were calculated over all tasks. Using the calibration matrices based on all loading methods combined resulted in small RMSDs (GRF: <8 N, center of pressure: <2 mm). Using the calibration matrices based on "pushing against manual resistance" resulted in similar RMSDs, proving it to be the best single loading method.

  6. On estimating the force-freeness based on observed magnetograms

    CERN Document Server

    Zhang, X M; Su, J T

    2016-01-01

    It is a common practice in the solar physics community to test whether or not measured photospheric or chromospheric vector magnetograms are force-free, using the Maxwell stress as a measure. Some previous studies have suggested that magnetic fields of active regions in the solar chromosphere are close to be force-free whereas there is no consistency among previous studies on whether magnetic fields of active regions in the solar photosphere are force-free or not. Here we use three kinds of representative magnetic fields (analytical force-free solutions, modeled solar-like force-free fields and observed non-force-free fields) to discuss on how the measurement issues such as limited field of view, instrument sensitivity and measurement error could affect the estimation of force-freeness based on observed magnetograms. Unlike previous studies that focus on discussing the effect of limited field of view or instrument sensitivity, our calculation shows that just measurement error alone can significantly influence...

  7. Micro-vibration-based slip detection in tactile force sensors.

    Science.gov (United States)

    Fernandez, Raul; Payo, Ismael; Vazquez, Andres S; Becedas, Jonathan

    2014-01-03

    Tactile sensing provides critical information, such as force, texture, shape or temperature, in manipulation tasks. In particular, tactile sensors traditionally used in robotics are emphasized in contact force determination for grasping control and object recognition. Nevertheless, slip detection is also crucial to successfully manipulate an object. Several approaches have appeared to detect slipping, the majority being a combination of complex sensors with complex algorithms. In this paper, we deal with simplicity, analyzing how a novel, but simple, algorithm, based on micro-vibration detection, can be used in a simple, but low-cost and durable, force sensor. We also analyze the results of using the same principle to detect slipping in other force sensors based on flexible parts. In particular, we show and compare the slip detection with: (i) a flexible finger, designed by the authors, acting as a force sensor; (ii) the finger torque sensor of a commercial robotic hand; (iii) a commercial six-axis force sensor mounted on the wrist of a robot; and (iv) a fingertip piezoresistive matrix sensor.

  8. Longitudinal tire force estimation based on sliding mode observer

    Energy Technology Data Exchange (ETDEWEB)

    El Hadri, A.; Cadiou, J.C.; M' Sirdi, N.K. [Versailles Univ., Paris (France). Lab. de Robotique; Beurier, G.; Delanne, Y. [Lab. Central des Ponts, Centre de Nantes (France)

    2001-07-01

    This paper presents an estimation method for vehicle longitudinal dynamics, particularly the tractive/braking force. The estimation can be used to detect a critical driving situation to improve security. It can be used also in several vehicle control systems. The main characteristics of the vehicle longitudinal dynamics were taken into account in the model used to design an observer and computer simulations. The state variables are the angular wheel velocity, vehicle velocity and the longitudinal tire force. The proposed differential equation of the tractive/braking force is derived using the concept of relaxation length. The observer designed is based on the sliding mode approach using only the angular wheel velocity measurement. The proposed method of estimation is verified through a one-wheel simulation model with a ''Magic formula'' tire model. Simulations results show an excellent reconstruction of the tire force. (orig.)

  9. Jamming transitions in force-based models for pedestrian dynamics

    CERN Document Server

    Chraibi, Mohcine; Tordeux, Antoine; Nishinari, Katsuhiro; Schadschneider, Andreas; Seyfried, Armin

    2015-01-01

    Force-based models describe pedestrian dynamics in analogy to classical mechanics by a system of second order ordinary differential equations. By investigating the linear stability of two main classes of forces, parameter regions with unstable homogeneous states are identified. In this unstable regime it is then checked whether phase transitions or stop-and-go waves occur. Results based on numerical simulations show, however, that the investigated models lead to unrealistic behavior in form of backwards moving pedestrians and overlapping. This is one reason why stop-and-go waves have not been observed in these models. The unrealistic behavior is not related to the numerical treatment of the dynamic equations but rather indicates an intrinsic problem of this model class. Identifying the underlying generic problems gives indications how to define models that do not show such unrealistic behavior. As an example we introduce a new force-based model which produces realistic jam dynamics without the appearance of u...

  10. Adaptive Central Force Optimization Algorithm Based on the Stability Analysis

    Directory of Open Access Journals (Sweden)

    Weiyi Qian

    2015-01-01

    Full Text Available In order to enhance the convergence capability of the central force optimization (CFO algorithm, an adaptive central force optimization (ACFO algorithm is presented by introducing an adaptive weight and defining an adaptive gravitational constant. The adaptive weight and gravitational constant are selected based on the stability theory of discrete time-varying dynamic systems. The convergence capability of ACFO algorithm is compared with the other improved CFO algorithm and evolutionary-based algorithm using 23 unimodal and multimodal benchmark functions. Experiments results show that ACFO substantially enhances the performance of CFO in terms of global optimality and solution accuracy.

  11. 2009 Chatham County Georgia Lidar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — LiDAR generated point cloud acquired in spring 2009 for Chatham County, Georgia for the Metropolitan Planning Commission. The data are classified as follows: Class 1...

  12. 2009 Chatham County Georgia Lidar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — LiDAR generated point cloud acquired in spring 2009 for Chatham County, Georgia for the Metropolitan Planning Commission. The data are classified as follows: Class...

  13. Distribution of Georgia Oyster Reefs

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The feature class in this ESRI Geodatabase contains polygons representing oyster reefs along the Georgia coastal waterways from Chatham County south to Glynn County....

  14. System of gait analysis based on ground reaction force assessment

    Directory of Open Access Journals (Sweden)

    František Vaverka

    2015-12-01

    Full Text Available Background: Biomechanical analysis of gait employs various methods used in kinematic and kinetic analysis, EMG, and others. One of the most frequently used methods is kinetic analysis based on the assessment of the ground reaction forces (GRF recorded on two force plates. Objective: The aim of the study was to present a method of gait analysis based on the assessment of the GRF recorded during the stance phase of two steps. Methods: The GRF recorded with a force plate on one leg during stance phase has three components acting in directions: Fx - mediolateral, Fy - anteroposterior, and Fz - vertical. A custom-written MATLAB script was used for gait analysis in this study. This software displays instantaneous force data for both legs as Fx(t, Fy(t and Fz(t curves, automatically determines the extremes of functions and sets the visual markers defining the individual points of interest. Positions of these markers can be easily adjusted by the rater, which may be necessary if the GRF has an atypical pattern. The analysis is fully automated and analyzing one trial takes only 1-2 minutes. Results: The method allows quantification of temporal variables of the extremes of the Fx(t, Fy(t, Fz(t functions, durations of the braking and propulsive phase, duration of the double support phase, the magnitudes of reaction forces in extremes of measured functions, impulses of force, and indices of symmetry. The analysis results in a standardized set of 78 variables (temporal, force, indices of symmetry which can serve as a basis for further research and diagnostics. Conclusions: The resulting set of variable offers a wide choice for selecting a specific group of variables with consideration to a particular research topic. The advantage of this method is the standardization of the GRF analysis, low time requirements allowing rapid analysis of a large number of trials in a short time, and comparability of the variables obtained during different research measurements.

  15. STS-67 landing at Edwards Air Force Base

    Science.gov (United States)

    1995-01-01

    The drag chute is fully deployed in this view of the Space Shuttle Endeavour as it completes a mission of almost 17 days duration in space on runway 22 at Edwards Air Force Base in southern California. Landing occurred at 1:46 p.m. (EST), March 18, 1995.

  16. STS-66 landing at Edwards Air Force Base

    Science.gov (United States)

    1994-01-01

    The main landing gear is on the ground and the nose gear is about to touch down as the Space Shuttle Atlantis heads toward a stop at Edwards Air Force Base in southern California, ending a successful 10 day, 22 hour and 34 minute space mission. Landing occured at 7:34 a.m. (PST), November 14, 1994.

  17. The Campus-Based Formula. NASFAA Task Force Report

    Science.gov (United States)

    National Association of Student Financial Aid Administrators, 2014

    2014-01-01

    The primary purpose of the National Association of Student Financial Aid Administrators (NASFAA) Campus-Based Aid Allocation Task Force was to examine the formula by which congressional appropriations for the Federal Supplemental Educational Opportunity Grant (FSEOG), Federal Work-Study (FWS), and Perkins Loan programs are distributed to schools,…

  18. San Antonio Creek Restoration, Vandenberg Air Force Base, California

    Science.gov (United States)

    2008-06-27

    constrictor Racer Potential Masticophis lateralis Chaparral whipsnake Potential Lampropeltis getula California kingsnake Observed Pituophis catenifer...Unpublished master’s thesis, University of California , Santa Barbara. Grant, C. 1978a. Chumash: Introduction . In California , edited by Robert F. Heizer, pp...Final Draft Environmental Assessment San Antonio Creek Restoration Vandenberg Air Force Base California

  19. Model based control of dynamic atomic force microscope

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chibum [Department of Mechanical System Design Engineering, Seoul National University of Science and Technology, Seoul 139-743 (Korea, Republic of); Salapaka, Srinivasa M., E-mail: salapaka@illinois.edu [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)

    2015-04-15

    A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H{sub ∞} control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments.

  20. Model based control of dynamic atomic force microscope.

    Science.gov (United States)

    Lee, Chibum; Salapaka, Srinivasa M

    2015-04-01

    A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H(∞) control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments.

  1. A flexible piezoelectric force sensor based on PVDF fabrics

    Science.gov (United States)

    Wang, Y. R.; Zheng, J. M.; Ren, G. Y.; Zhang, P. H.; Xu, C.

    2011-04-01

    Polyvinylidene fluoride (PVDF) film has been widely investigated as a sensor and transducer material due to its high piezo-, pyro- and ferroelectric properties. To activate these properties, PVDF films require a mechanical treatment, stretching or poling. In this paper, we report on a force sensor based on PVDF fabrics with excellent flexibility and breathability, to be used as a specific human-related sensor. PVDF nanofibrous fabrics were prepared by using an electrospinning unit and characterized by means of scanning electron microscopy (SEM), FTIR spectroscopy and x-ray diffraction. Preliminary force sensors have been fabricated and demonstrated excellent sensitivity and response to external mechanical forces. This implies that promising applications can be made for sensing garment pressure, blood pressure, heartbeat rate, respiration rate and accidental impact on the human body.

  2. Magnetically controllable Casimir force based on a superparamagnetic metametamaterial

    Science.gov (United States)

    Ma, Junming; Zhao, Qian; Meng, Yonggang

    2014-02-01

    We theoretically investigate the magnetically controllable Casimir force between a parallel metal plate and a superparamagnetic metametamaterial (MMM) plate based on Mie scattering and effective medium theory. A type of MMM composed of superparamagnetic nanoparticles is proposed to fulfill the high frequency magnetic effect to gain Casimir repulsion when interacting with the metal plate. The permeability of such MMM depends on an external magnetic field, which makes it possible to adjust the magnitude of Casimir force. The effects of size, filling ratio, and magnetic property of the superparamagnetic particles on the tuning range are also investigated. Construction of such MMM using the micro/nanofabrication technology is promising to achieve magnetically controllable repulsive Casimir force.

  3. Environmental Assessment for Beddown of Air Force Reserve Command Classic Associate Unit on A/OA-10 Operations and Maintenance Moody Air Force Base, Georgia

    Science.gov (United States)

    2008-09-01

    Sulfur Dioxide. SO2 is emitted primarily from the combustion of coal and oil by steel mills, pulp and paper mills, and from non-ferrous smelters...trees and little midstory to early successional areas planted with native vegetation. Wetland areas are managed to ensure accessibility, and roads...mixed pine/hardwood, with the remaining 4,859 acres (65%) consisting of wetland forests, either pond pine (Pinus serotina), cypress (Taxodium ascendens

  4. 2010 Coastal Georgia Elevation Project Lidar Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Between January and March 2010, lidar data was collected in southeast/coastal Georgia under a multi-agency partnership between the Coastal Georgia Regional...

  5. Grapevine phytoplasma disease in Georgia

    Directory of Open Access Journals (Sweden)

    N.M. Chkhaidze

    2016-09-01

    Full Text Available Results of grapevine yellows disease (GY studies in 2005–2015 are reported. Based on symptoms and Dienes' staining method the disease was detected in Kartli, Kakheti and Guria regions on Vitis vinifera (L. Rkatsiteli, Saperavi, Shavkapito, Tavkveri, Aladasturi, Kachichi, Ganjuri, Chardonnay, Vitis labrusca (L. cultivar Isabella, species hybrid cultivar Noah. The phytoplasmas were also visualized by using electron microscopy. The disease seriously modifies the structure of leaf the grapevine phloem, the chlorophyll content and the functioning of sink–source system. According to anatomical characters the studied cultivars showed a decreasing resistance from Noah, to Aladasturi, Rkatsiteli, Kachichi and Saperavi. In the areas of disease epidemic 12 leafhopper species were identified: Agalmatium grylloides (Fabricius, 1794, Cicadella viridis (Linnaeus, 1758, Dictyophara europaea (Linnaeus, 1767, Empoasca vitis (Gothe, 1875, Erythroneura imeretina Dekanoidze, 1962, Hyalesthes mlokosieviczi Signoret, 1879, Hyalesthes obsoletus Signoret, 1865, Lepironia coleoptrata (Linnaeus, 1758, Pentastiridius leporinus (Linnaeus, 1761, Philaenus spumarius (Linnaeus, 1758, Metcalfa pruinosa (Say, 1830, Ricania japonica (Melichar, 1898, which may be possible vectors of grapevine phytoplasmas in Georgia.

  6. Water-limiting conditions based on monthly water balances and potential evapotranspiration at Panola Mountain Research Watershed, Georgia, U.S.A

    Science.gov (United States)

    Brent Aulenbach; Norman E. Peters; James Freer

    2016-01-01

    Drought and resulting water-limiting conditions can result in negative ecological impacts such as reduced plant growth and increased stress that can make plants more vulnerable to threats such as insect infestations. The long-term dataset at Panola Mountain Research Watershed, a small 0.41-hectare forested watershed near Atlanta, Georgia, U.S.A., was used to better ...

  7. Complex Behavior of Forces Influencing Molten Weld Metal Flow based on Static Force Balance Theory

    Science.gov (United States)

    Achebo, Joseph I.

    This study is aimed at investigating the forces responsible for the detachment of molten metal droplets formed at an electrode tip, which imminently and eventually drop into the weld pool during the welding process. The Equations used by Kim and Eagar in 1993 were applied to this study. It was found that the different detaching forces which are the gravitational force, the electromagnetic force, and the drag force, were determined to be 7.154 x 10-6N, 0.05N and 1.736N respectively. Whereas, the primary retaining force, which is the surface tension force, was calculated to be 0.0195N. From the findings, since the combination of the detaching forces taken together is greater than the retaining force, detachment of the molten metal droplet must inevitably occur. The combined effect of these forces on the behaviour of molten metal during the droplet detachment process was adequately investigated in this study.

  8. Various aspects of sustainability analysis in Georgia

    Science.gov (United States)

    C. J. Cieszewski; M. Zasada; B. E. Borders; R. Lowe; M. L. Clutter; R. F. Daniels; R. Izlar

    2002-01-01

    In 2001 the Georgia Traditional Industries Program (TIP) sponsored a cooperative study at the D.B. Warnell School of Forest Resources, University of Georgia, to analyze the long-term sustainability of the fiber supply in Georgia. The subject of this study is relevant to a diverse array of disciplines, and it offers the opportunity to explore various aspects of...

  9. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  10. Drainage Canal Survey, Hickam Air Force Base, Hawaii

    Science.gov (United States)

    1993-03-01

    der, The Water Encyclopedia, Second Edition, Chelsea, Michigan, Lewis Publishers, 1990. 4. Manahan , Stanley E., Environmental Chemistry , Fifth...OCCUPATIONAL AND ENVIRONMENTAL HEALTH DIRECTORATE L B2402 E Drive ABrooks Air Force Base, TX 78235P1I14 "• B ELECTEO P 0 •p3193 ER March 1993 A T Final...EDWARD F. MAHER, Col, USAF, BSC Environmental Engineer Consultant Chief, Bioenvironmental Engineering Division Form Approved REPORT DOCUMENTATION PAGE

  11. Wastewater Characterization Survey, Mountain Home Air Force Base, Idaho

    Science.gov (United States)

    1993-03-01

    Water Pollution Control, Second Edition, New York, McGraw-Hill, 1989. 4. Manahan , Stanley E., Environmental Chemistry , Fifth Edition, Chelsea, Michigan...OCCUPATIONAL AND ENVIRONMENTAL HEALTH DIRECTORATE 0 BIOENVIRONMENTAL ENGINEERING DIVISION2402 E Drive Brooks Air Force Base, TX 78235-5114 G March...Royal Road, Springfield VA 22161. DARRIN L. CURTIS, Capt, USAF, BSC EDWARD F. MAHER, Col, USAF, BSC Environmental Engineer Consultant Chief

  12. An EGaIn-based flexible piezoresistive shear and normal force sensor with hysteresis analysis in normal force direction

    Science.gov (United States)

    Shi, Xiaomei; Cheng, Ching-Hsiang; Zheng, Yongping; Wai, P. K. A.

    2016-10-01

    This paper reports a flexible piezoresistive shear and normal force sensor based on eutectic gallium-indium (EGaIn) with fabrication and testing results, which includes further study on the hysteresis analysis in the normal force direction. By using EGaIn as a gauge material, it can detect force on a flexible and stretchable substrate without breaking the gauge wires. However, the liquid-metal gauge wire needs to be packaged and protected in an elastomeric substrate, which creates hysteresis on the sensed resistance with respect to the change of applied force. This paper shows measurement results in static force and also under different speeds of loading force cycles. The relationship between the applied normal force and hysteresis of signal was observed, mainly owing to larger deformation and slower recovering time of the elastomeric substrate that defines the shape of the liquid-metal gauge wire for resistance measurement.

  13. Legal abortion in Georgia, 1980.

    Science.gov (United States)

    Spitz, A M; Oberle, M; Zaro, S M

    1984-02-01

    According to data reported to the Georgia Department of Human Resources (DHR), the number of induced abortions performedin Georgia in 1980 decreased for the 1st time since 1968 when the state legalized abortion. To verify this reported decrease, the DHR data were compared with statistics obtained by the Alan Guttmacher Institute in a 1980 survey of abortion providers in Georgia. Since the AGI contacts providers directly, its statistics are considered a more accurate reflection of abortions performed. According to the DHR, the number of abortions dropped from 36,579 in 1979 to 33,288 in 1980, a 9% decrease, and the abortion rate fell from 26.6/1000 women ages 15-44 years to 23.9/1000. AGI data indicated a drop from 38,760 abortions in 1979 to 37,890 in 1980, a 2% decrease. Since both sources noted a similar trend despite differences in data collection methods, the 1980 decline in abortion procedures in Georgia is considered to represent a true decline rather than s statistical artifact. The sociodemographic characteristics of women obtaining abortions in Georgia in 1980 were also analyzed on the basis of DHR data. Although the number of abortions in Georgia performed on Georgia residents increased 2.5% from 1979-80 to 90.7%, the abortion ratio for residents decreased from 367.7 to 327.4 abortions/1000 live births. There was little change in the age, race, or marital status distribution of women receiving abortions. The ratio for white women was 317 abortions/1000 live births and that for blacks was 342/1000. The abortion ratio for unmarried women (1166/1000) was 13 times that for married women (88/1000). The number of repeat abortions decreased form 34% in 1979 to 29% in 1980. Moreover, 93% of women obtaining abortions did so in the 1st 12 weeks of gestation compared with 89% in 1979. The percentage of abortions performed in clinics increased from 66.5% in 1979 to 75.3% in 1980, with suction curettage accounting for 85% of all abortions in the 1st 12 weeks of

  14. Cryogel micromechanics unraveled by atomic force microscopy-based nanoindentation.

    Science.gov (United States)

    Welzel, Petra B; Friedrichs, Jens; Grimmer, Milauscha; Vogler, Steffen; Freudenberg, Uwe; Werner, Carsten

    2014-11-01

    Cell-instructive physical characteristics of macroporous scaffolds, developed for tissue engineering applications, often remain difficult to assess. Here, an atomic force microscopy-based nanoindentation approach is adapted to quantify the local mechanical properties of biohybrid glycosaminoglycan-poly(ethylene glycol) cryogels. Resulting from cryoconcentration effects upon gel formation, cryogel struts are observed to feature a higher stiffness compared to the corresponding bulk hydrogel materials. Local Young's moduli, porosity, and integral moduli of the cryogel scaffolds are compared in dependence on gel formation parameters. The results provide valuable insights into the cryogelation process and a base for adjusting physical characteristics of the obtained cryogel scaffolds, which can critically influence the cellular response.

  15. Active contour model based on force field analysis

    Institute of Scientific and Technical Information of China (English)

    HOU Zhi-qiang; HAN Chong-zhao

    2006-01-01

    The traditional snake initial contour should be close to the true boundary of an object of interest in an image;otherwise,an incorrect result will be obtained.Next,active contours have difficulties progressing into boundary concavities.Moreover,the traditional snake as well as almost all of its improved methods can be easily obtained from the local minimum because snake models are nonconvex.An active contour model based on force field analysis (FFA),namely,FFA snake model,is presented in this paper.Based on analyzing force distribution rules of the distance potential force field,a standard is introduced here to distinguish the false one from contour points.The result is not considered as the final solution when the snake energy is minimal.Furthermore,estimation and calculation should be made according to the established standard;only then can the result be considered final.Thus,the snake is prevented from running into the local minimum.The simulation results show that the FFA snake model has a large capture range and can move a snake into the boundary concavities,and that it is able to obtain the object of interest's contour precisely.Compared with the gradient vector flow snake,this new model has a low computational cost.

  16. Final Environmental Assessment Nellis Air Force Base School Initiative, Nellis Air Force Base, Clark County, Nevada

    Science.gov (United States)

    2015-04-01

    Environmental Quality CFR Code of Federal Regulations COC Community of Comparison CREDO Center for Research on Education Outcomes (Stanford...Research on Education Outcomes [ CREDO ] 2009). If the new school was not as good as the Lomie Gray Heard School, students living on-base could end up at...Report, CEC- 100-2007-008-CMF. Center for Research on Education Outcomes ( CREDO ) at Stanford University. 2009. Multiple Choice: Charter School

  17. A force plate based method for the calibration of force/torque sensors

    NARCIS (Netherlands)

    Faber, Gert S.; Chang, Chien-Chi; Kingma, Idsart; Schepers, H. Martin; Herber, Sebastiaan; Veltink, Peter H.; Dennerlein, Jack T.

    2012-01-01

    This study describes a novel calibration method for six-degrees-of-freedom force/torque sensors (FTsensors) using a pre-calibrated force plate (FP) as a reference measuring device. In this calibration method, the FTsensor is rigidly connected to a FP and force/torque data are synchronously recorded

  18. Environmental Assessment: General Plan-Based Environmental Impact Analysis Process, Laughlin Air Force Base

    Science.gov (United States)

    2007-05-01

    BASED ENVIROMENTAL IMPACT ANALYSIS PROCESS LAUGHLIN AIR FORCE BASE, TEXAS AGENCY: 47th Flying Training Wing (FTW), Laughlin Air Force Base (AFB), Texas...in their decision-making process. The President’s Council on Environmental Quality (CEQ) has issued regulations to implement NEPA that include...Order (EO) 12898, Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations, was issued by the President on

  19. Research on Robot Surface Tracking Motion Based on Force Control of Six-Axis Wrist Force Sensor

    Directory of Open Access Journals (Sweden)

    Zhijun Wang

    2015-01-01

    Full Text Available In order to reduce the environmental contact force and make the operation task completed successfully, the robot is frequently required with force perception and active compliance control. Based on the six-axis wrist force sensor measuring, a robot model of surface tracking motion is proposed, and its force control algorithm and experiment are studied. The measurement principle of the six-axis wrist force sensor and the inadequacy of the sensor measuring the six-dimensional force online are introduced firstly. The surface tracking motion model and its coordinate system are established. On this basis, the relationship between the pose adjustment of surface tracking motion and the measuring results of the six-axis wrist force sensor is deduced. At last, the experimental study of the surface tracking robot system that applied the force control algorithm is conducted. The experiment shows that the robot can adjust the current position and orientation in real time according to the six-axis wrist force sensor measuring, which demonstrates the feasibility of the surface tracking motion model and the correctness of the force control algorithm.

  20. Estimating playa lake flooding: Edwards Air Force Base, California, USA

    Science.gov (United States)

    French, Richard H.; Miller, Julianne J.; Dettling, Charles R.

    2005-05-01

    Playa, or terminal lakes are essentially flat surfaces with minimal topographic relief, and they are common in most semi and arid-environments. Both ground and surface waters can accumulate within a terminal basin and result in flooding of the playa. Within the boundaries of Edwards Air Force Base, located in Southern California, there are four playas: Rosamond, Buckhorn, Rogers, and Rich Dry Lakes. The Rosamond and Rogers playas are currently and have historically been used as runways, taxiways, and industrial areas by the US Air Force and National Aeronautics and Space Administration. A flood assessment of Rogers Dry Lake was mandated due to Air Force regulations concerning delineation of 100-year flood hazard zones, and US Federal regulations, which specify that playas are 100-year special flood hazard zones. From an environmental viewpoint, when water is present, playa lakes can also provide habitat for migratory birds. There is neither guidance nor a generally accepted approach for identifying flood hazards on playas. Therefore, an approach was developed to determine the 100-year regulatory floodplain associated with a dry lakebed, and this approach was used to define tile regulatory floodplain on Rogers and Rich Dry Lakes. This paper describes the application of the method developed to estimate the regulatory 100-year depth of water on Roger and Rich Dry Lakes.

  1. It is all about resolution. Meeting report based upon presentations at the 10th International Global BioMillennium 2006 symposium on molecular cell biology (Tbilisi, Georgia).

    Science.gov (United States)

    Soreq, Hermona; Honigman, Alik

    2007-02-01

    The 2006 Global BioMillennium Conference took place in Tbilisi, Georgia, on 13-17 July 2006. The Conference was focused on key aspects of gene expression processes. Characteristic of state-of-the-art research in the life sciences, the invited lectures spanned approaches in cell biology, gene expression, and protein function. A particular aspect that is special to the BioMillenium series of conferences (this has been the 10th in this series) is the emphasis on new and emerging technologies; the various experts in the subfields that were covered presented what, in their view, should be critical to enabling future progress.

  2. STS-49 Lands at Edwards Air Force Base

    Science.gov (United States)

    1992-01-01

    STS-49 Orbiter Endeavour landed at Edwards Air Force Base on May 16, 1992 The drogue chute precedes the main chute in NASA's first exercise of its detailed test objective on the drag chute system. STS-49 ended its successful nine day mission dedicated to the retrieval, repair, and redeployment of the the INTELSAT VI (F-3) satellite. The communication satellite for the International Telecommunication Satellite organization had been stranded in an unusable orbit since its launch aboard the Titan rocket in March 1990. The mission marked the first time 3 astronauts worked simultaneously outside the space craft.

  3. ROBOT'S MOTION ERROR AND ONLINE COMPENSATION BASED ON FORCE SENSOR

    Institute of Scientific and Technical Information of China (English)

    GAN Fangjian; LIU Zhengshi; REN Chuansheng; ZHANG Ping

    2007-01-01

    Robot's dynamic motion error and on-line compensation based on multi-axis force sensor are dealt with. It is revealed that the reasons of the error are formed and the relations of the error are delivered. A motion equation of robot's termination with the error is established, and then, an error matrix and an error compensation matrix of the motion equation are also defined. An on-line error's compensation method is put forward to decrease the displacement error, which is a degree of millimeter, shown by the result of Simulation of PUMA562 robot.

  4. Atomic force microscopy-based characterization and design of biointerfaces

    Science.gov (United States)

    Alsteens, David; Gaub, Hermann E.; Newton, Richard; Pfreundschuh, Moritz; Gerber, Christoph; Müller, Daniel J.

    2017-03-01

    Atomic force microscopy (AFM)-based methods have matured into a powerful nanoscopic platform, enabling the characterization of a wide range of biological and synthetic biointerfaces ranging from tissues, cells, membranes, proteins, nucleic acids and functional materials. Although the unprecedented signal-to-noise ratio of AFM enables the imaging of biological interfaces from the cellular to the molecular scale, AFM-based force spectroscopy allows their mechanical, chemical, conductive or electrostatic, and biological properties to be probed. The combination of AFM-based imaging and spectroscopy structurally maps these properties and allows their 3D manipulation with molecular precision. In this Review, we survey basic and advanced AFM-related approaches and evaluate their unique advantages and limitations in imaging, sensing, parameterizing and designing biointerfaces. It is anticipated that in the next decade these AFM-related techniques will have a profound influence on the way researchers view, characterize and construct biointerfaces, thereby helping to solve and address fundamental challenges that cannot be addressed with other techniques.

  5. Influence of septic systems on stream base flow in the Apalachicola-Chattahoochee-Flint River Basin near Metropolitan Atlanta, Georgia, 2012

    Science.gov (United States)

    Clarke, John S.; Painter, Jaime A.

    2014-01-01

    Septic systems were identified at 241,733 locations in a 2,539-square-mile (mi2) study area that includes all or parts of 12 counties in the Metropolitan Atlanta, Georgia, area. Septic system percolation may locally be an important component of streamflow in small drainage basins where it augments natural groundwater recharge, especially during extreme low-flow conditions. The amount of groundwater reaching streams depends on how much is intercepted by plants or infiltrates to deeper parts of the groundwater system that flows beyond a basin divide and does not discharge into streams within a basin. The potential maximum percolation from septic systems in the study area is 62 cubic feet per second (ft3/s), of which 52 ft3/s is in the Chattahoochee River Basin and 10 ft3/s is in the Flint River Basin. These maximum percolation rates represent 0.4 to 5.7 percent of daily mean streamflow during the 2011–12 period at the farthest downstream gaging site (station 02338000) on the Chattahoochee River, and 0.5 to 179 percent of daily mean streamflow at the farthest downstream gaging site on the Flint River (02344350). To determine the difference in base flow between basins having different septic system densities, hydrograph separation analysis was completed using daily mean streamflow data at streamgaging stations at Level Creek (site 02334578), with a drainage basin having relatively high septic system density of 101 systems per square mile, and Woodall Creek (site 02336313), with a drainage basin having relatively low septic system density of 18 systems per square mile. Results indicated that base-flow yield during 2011–12 was higher at the Level Creek site, with a median of 0.47 cubic feet per second per square mile ([ft3/s]/mi2), compared to a median of 0.16 (ft3/s)/mi2, at the Woodall Creek site. At the less urbanized Level Creek site, there are 515 septic systems with a daily maximum percolation rate of 0.14 ft3/s, accounting for 11 percent of the base flow in

  6. 76 FR 75453 - Restricted Areas and Danger Zones at Eglin Air Force Base, FL

    Science.gov (United States)

    2011-12-02

    ... follows: Sec. 334.700 Choctawhatchee Bay, aerial gunnery ranges, Air Armament Center, Eglin Air Force Base... Mexico adjacent to Santa Rosa Island, Headquarters Air Armament Center, Eglin Air Force Base, Fla. (a... Santa Rosa Island, Armament Center, Eglin Air Force Base, Fla. (a) The areas. (1) The danger zone....

  7. The Perception of National Security in Georgia

    Directory of Open Access Journals (Sweden)

    Merabishvili Gela

    2016-12-01

    Full Text Available This article examines how the on-going confrontation between Russia and the West affects perceptions of security in Georgia. Our angle is twofold: in addition to comparing previous National Security Concepts of Georgia we examine both governmental and public perceptions of security in the light of Georgia’s foreign policy priorities, its relationship with neighbouring countries and conflict resolution policy. Since Georgia declares 20 per cent of its territory to be occupied, the article focuses particularly on the crisis in Ukraine and its effect on security debates in Georgia. As the upcoming parliamentary elections in Georgia in autumn 2016 are highly important to maintain the current foreign policy course and secure achievements, the paper also tries to answer how these global and regional developments may be interpreted and reflected in the next National Security Concept of Georgia (whenever it might be published.

  8. Geodiversity of Georgia: valorization of geotouristic potential

    Science.gov (United States)

    Abramowicz, Anna

    2017-04-01

    Georgia, as a country with a high geodiversity, boasts an infinite variety of landscapes, wealth of geological formations and surface water systems. These attributes have a significant influence on the development of geo-touristic potential. The prevalence of geotourism can positively improve the situation in the country. Unfortunately, many interesting places are not sufficiently well utilized, which makes them difficult to access. There is also a failure to provide or disseminate information about these places to visitors. Various sources describe numerous locations, but none of them carry a full inventory or database of categorized objects. Inventory based on studies and field work helped to create categorized geosites in Georgia (including the occupied territories). Evidential cards with detailed descriptions were prepared for every cataloged object. Categorized geosites were used to carry out a valorisation of geotouristic objects and geodiversity evaluation by QGIS and ArcGIS. Valorization of geotouristic potential determined two regions with an exceptionally huge attractiveness and geodiversity on a national scale. Results of the evaluation and valorisation were visualised and presented as an application in ArcGIS Online platform.

  9. Force-compensated hydrogel-based pH sensor

    Science.gov (United States)

    Deng, Kangfa; Gerlach, Gerald; Guenther, Margarita

    2015-04-01

    This paper presents the design, simulation, assembly and testing of a force-compensated hydrogel-based pH sensor. In the conventional deflection method, a piezoresistive pressure sensor is used as a chemical-mechanical-electronic transducer to measure the volume change of a pH-sensitive hydrogel. In this compensation method, the pH-sensitive hydrogel keeps its volume constant during the whole measuring process, independent of applied pH value. In order to maintain a balanced state, an additional thermal actuator is integrated into the close-loop sensor system with higher precision and faster dynamic response. Poly (N-isopropylacrylamide) (PNIPAAm) with 5 mol% monomer 3-acrylamido propionic acid (AAmPA) is used as the temperature-sensitive hydrogel, while poly (vinyl alcohol) with poly (acrylic acid) (PAA) serves as the pH-sensitive hydrogel. A thermal simulation is introduced to assess the temperature distribution of the whole microsystem, especially the temperature influence on both hydrogels. Following tests are detailed to verify the working functions of a sensor based on pH-sensitive hydrogel and an actuator based on temperature-sensitive hydrogel. A miniaturized prototype is assembled and investigated in deionized water: the response time amounts to about 25 min, just half of that one of a sensor based on the conventional deflection method. The results confirm the applicability of t he compensation method to the hydrogel-based sensors.

  10. Water Resources Investigations at Edwards Air Force Base since 1988

    Science.gov (United States)

    Sneed, Michelle; Nishikawa, Tracy; Martin, Peter

    2006-01-01

    Edwards Air Force Base (EAFB) in southern California (fig. 1) has relied on ground water to meet its water-supply needs. The extraction of ground water has led to two major problems that can directly affect the mission of EAFB: declining water levels (more than 120 ft since the 1920s) and land subsidence, a gradual downward movement of the land surface (more than 4 ft since the late 1920s). As water levels decline, this valuable resource becomes depleted, thus requiring mitigating measures. Land subsidence has caused cracked (fissured) runways and accelerated erosion on Rogers lakebed. In 1988, the U.S. Geological Survey (USGS), in cooperation with the U.S. Air Force, began investigations of the effects of declining water levels and land subsidence at EAFB and possible mitigation measures, such as the injection of imported surface water into the ground-water system. The cooperative investigations included data collection and analyses, numerical simulations of ground-water flow and land subsidence, and development of a preliminary simulation-optimization model. The results of these investigations indicate that the injection of imported water may help to control land subsidence; however, the potential ground-water-quality impacts are unknown.

  11. STS-92 - Landing at Edwards Air Force Base

    Science.gov (United States)

    2000-01-01

    The Space Shuttle Discovery glides in for landing at Edwards Air Force Base in Southern California at the conclusion of mission STS-92 on October 24, 2000. STS-92 was the 100th mission since the fleet of four Space Shuttles began flying in 1981. (Due to schedule changes, missions are not always launched in the order that was originally planned.) The almost 13-day mission was the last construction mission for the International Space Station prior to the first scientists taking up residency in the orbiting space laboratory the following month. The seven-member crew on STS-92 included mission specialists Koichi Wakata, Michael Lopez-Alegria, Jeff Wisoff, Bill McArthur and Leroy Chiao, pilot Pam Melroy and mission commander Brian Duffy.

  12. Atomic force microscope based on vertical silicon probes

    Science.gov (United States)

    Walter, Benjamin; Mairiaux, Estelle; Faucher, Marc

    2017-06-01

    A family of silicon micro-sensors for Atomic Force Microscope (AFM) is presented that allows to operate with integrated transducers from medium to high frequencies together with moderate stiffness constants. The sensors are based on Micro-Electro-Mechanical-Systems technology. The vertical design specifically enables a long tip to oscillate perpendicularly to the surface to be imaged. The tip is part of a resonator including quasi-flexural composite beams, and symmetrical transducers that can be used as piezoresistive detector and/or electro-thermal actuator. Two vertical probes (Vprobes) were operated up to 4.3 MHz with stiffness constants 150 N/m to 500 N/m and the capability to oscillate from 10 pm to 90 nm. AFM images of several samples both in amplitude modulation (tapping-mode) and in frequency modulation were obtained.

  13. Based on the Force Deployment Model of Unascertained Expectation

    Directory of Open Access Journals (Sweden)

    Jianli Chen

    2013-05-01

    Full Text Available In this study, we utilize the unascertained mathematics method to give the unascertained number of countermeasure of anti-terrorism strategic force deployment and unknown event. It has been defined the situation sets of force deployment, condition density and mathematical expectation of density model. It has been given the unascertained parameters Cij which decide and direct the force deployment. Find out the condition density matrix of force deployment, further get the conditional density of single target force deployment, using the maximum density mathematical expectation in order to get the optimal mathematical model of multiple target force deployment. Analyzing the coefficient of model and provide two kinds of discussed computing method. The model overcomes the limitation of past deterministic thinking method which study the force deployment and provide the decision maker a relative substantial theory evidence.

  14. Sitewide feasibility study Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  15. Computerized Integrated Inventory Control for an Air Force Base-Level Supply System.

    Science.gov (United States)

    1980-06-01

    Monterey, California 93940 5. Major Angelo C. Molato 1 Philippine Air Force (Student) No. 62 Medicion I Imus, Cavite Philippines 6. Air Force Computer Center 1 HPAF, Nichols Air Base Pasay City Philippines 136

  16. Impact of thermal frequency drift on highest precision force microscopy using quartz-based force sensors at low temperatures

    Directory of Open Access Journals (Sweden)

    Florian Pielmeier

    2014-04-01

    Full Text Available In frequency modulation atomic force microscopy (FM-AFM the stability of the eigenfrequency of the force sensor is of key importance for highest precision force measurements. Here, we study the influence of temperature changes on the resonance frequency of force sensors made of quartz, in a temperature range from 4.8–48 K. The sensors are based on the qPlus and length extensional principle. The frequency variation with temperature T for all sensors is negative up to 30 K and on the order of 1 ppm/K, up to 13 K, where a distinct kink appears, it is linear. Furthermore, we characterize a new type of miniaturized qPlus sensor and confirm the theoretically predicted reduction in detector noise.

  17. Molecular force spectroscopy with a DNA origami-based nanoscopic force clamp.

    Science.gov (United States)

    Nickels, Philipp C; Wünsch, Bettina; Holzmeister, Phil; Bae, Wooli; Kneer, Luisa M; Grohmann, Dina; Tinnefeld, Philip; Liedl, Tim

    2016-10-21

    Forces in biological systems are typically investigated at the single-molecule level with atomic force microscopy or optical and magnetic tweezers, but these techniques suffer from limited data throughput and their requirement for a physical connection to the macroscopic world. We introduce a self-assembled nanoscopic force clamp built from DNA that operates autonomously and allows massive parallelization. Single-stranded DNA sections of an origami structure acted as entropic springs and exerted controlled tension in the low piconewton range on a molecular system, whose conformational transitions were monitored by single-molecule Förster resonance energy transfer. We used the conformer switching of a Holliday junction as a benchmark and studied the TATA-binding protein-induced bending of a DNA duplex under tension. The observed suppression of bending above 10 piconewtons provides further evidence of mechanosensitivity in gene regulation.

  18. 76 FR 59177 - Georgia Disaster #GA-00036

    Science.gov (United States)

    2011-09-23

    ... ADMINISTRATION Georgia Disaster GA-00036 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a notice of an Administrative declaration of a disaster for the State of GEORGIA dated 09/13..., Office of Disaster Assistance, U.S. Small Business Administration, 409 3rd Street, SW., Suite...

  19. The University System of Georgia's GALILEO.

    Science.gov (United States)

    Penson, Merryll

    1998-01-01

    The University System of Georgia and the Online Computer Library Center (OCLC) built the innovative electronic library GALILEO (GeorgiA LIbrary LEarning Online system). This article describes the cooperation, leadership, and technology that made GALILEO possible; the proposal; planning and implementation; governance; current status; and future…

  20. Final Environmental Assessment: Replacement Joint Force Headquarters Building, Hanscom Air Force Base Massachusetts

    Science.gov (United States)

    2010-01-22

    occupies building 1503 with the State Medical Command (Med Com). Med Com plans, programs, provides, and sustains health force protection and medical/ dental ...Center for Health Promotion and Preventative Medicine (USACHPPM) Dempsey, Judith; Polyak , Lisa; Tushek, Stephen. Technical Guide for Preparing a... Polyak , Lisa; Tushek, Stephen. Technical Guide for Preparing a Record of Nonapplicability for the General Conformity Rule. November 2003. USEPA. AP 42

  1. Virtual force field based obstacle avoidance and agent based intelligent mobile robot

    Science.gov (United States)

    Sarkar, Saurabh; Reynolds, Scott; Hall, Ernest

    2007-09-01

    This paper presents a modified virtual force based obstacle avoidance approach suited for laser range finder. The modified method takes advantage of the polar coordinate based data sent by the laser sensor by mapping the environment in a polar coordinate system. The method also utilizes a Gaussian function based certainty values to detect obstacle. The method successfully navigates through complex obstacles and reaches target GPS waypoints.

  2. Determination of electrostatic force and its characteristics based on phase difference by amplitude modulation atomic force microscopy

    Science.gov (United States)

    Wang, Kesheng; Cheng, Jia; Yao, Shiji; Lu, Yijia; Ji, Linhong; Xu, Dengfeng

    2016-12-01

    Electrostatic force measurement at the micro/nano scale is of great significance in science and engineering. In this paper, a reasonable way of applying voltage is put forward by taking an electrostatic chuck in a real integrated circuit manufacturing process as a sample, applying voltage in the probe and the sample electrode, respectively, and comparing the measurement effect of the probe oscillation phase difference by amplitude modulation atomic force microscopy. Based on the phase difference obtained from the experiment, the quantitative dependence of the absolute magnitude of the electrostatic force on the tip-sample distance and applied voltage is established by means of theoretical analysis and numerical simulation. The results show that the varying characteristics of the electrostatic force with the distance and voltage at the micro/nano scale are similar to those at the macroscopic scale. Electrostatic force gradually decays with increasing distance. Electrostatic force is basically proportional to the square of applied voltage. Meanwhile, the applicable conditions of the above laws are discussed. In addition, a comparison of the results in this paper with the results of the energy dissipation method shows the two are consistent in general. The error decreases with increasing distance, and the effect of voltage on the error is small.

  3. The Tagliavini Report Revisited: Jus ad Bellum and the Legality of the Russian Intervention in Georgia

    Directory of Open Access Journals (Sweden)

    Alexander Lott

    2012-02-01

    Full Text Available The purpose of this manuscript is to critically examine the legal findings of the Tagliavini Report in hope of contributing to the debate on its principal conclusions. The establishment of an independent fact-finding commission to explore the origins and course of the conflict marked the first time in its history that the EU, key mediator in concluding the Georgia-Russia conflict's ceasefire, intervened actively in an armed conflict. The author, disparate from the Fact-Finding Mission, does not find Georgia to have the right of self-defence in regard of attacks by Ossetian secessionist forces preceding the Russian invasion. The author argues, analogously to the Tagliavini Report, that Georgian offensive on Tskhinvali in South Ossetia represented an excessive use of force which violated Article 2(4 of the UN Charter. In regards to the central issue, the author contends that the Russian military intervention in Georgia on 8 August 2008 following Georgian offensive on Tskhinvali was not justified under the scope of reinforcing its peacekeeping force, or on the grounds of humanitarian intervention, intervention by invitation, or protection of citizens. Distinct from the Tagliavini Report, this manuscript reaches the conclusion that Russia was neither entitled to invade Georgia for protecting its peacekeeping contingent that comprised part of an international peacekeeping force

  4. Ecological investigation of a hazardous waste site, Warner Robins, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Wade, M. [Oak Ridge National Lab., TN (United States); Billig, P. [Camp Dresser and McKee, Inc., Denver, CO (United States)

    1993-05-01

    Landfill No. 4 and the sludge lagoon at Robins Air Force Base, Warner Robins, Georgia, were added to the United States Environmental Protection Agency (EPA) National Priorities List in 1987 because of highpotential for contaminant migration. Warner Robins is located approximately 90 miles southeast of Atlanta. In 1990 CH2M HILL conducted a Remedial Investigation at the base that recommended that further ecological assessment investigations be conducted (CH2M HILL 1990). The subject paper is the result of this recommendation. The ecological study was carried out by the Hazardous Waste Remedial Actions Program (HAZWRAP)Division of Martin Marietta Energy Systems, Inc., working jointly with its subcontractor CDM (CDM 1992a). The primary area of investigation (Zone 1) included the sludge lagoon, Landfill No. 4, the wetland area east of the landfill and west of Hannah Road (including two sewage treatment ponds), and the area between Hannah Road and Horse Creek (Fig. 1). The bottomland forest wetlands of Zone 1 extend from the landfill east to Horse Creek. Surface water and groundwater flow across Zone 1 is generally in an easterly direction toward Horse Creek. Horse Creek is a south-flowing tributary of the Ocmulgee River Floodplain. The objective of the study was to perform a quantitative analysis of ecological risk associated with the ecosystems present in Zone 1. This investigation was unique because the assessment was to be based upon many measurement endpoints resulting in both location-specific data and data that would assess the condition of the overall ecosystem. The study was segregated into five distinct field investigations: hydrology, surface water and sediment, aquatic biology, wetlands ecology, and wildlife biology.

  5. Problem-Based Learning in 9th Grade Chemistry Class: "Intermolecular Forces"

    Science.gov (United States)

    Tarhan, Leman; Ayar-Kayali, Hulya; Urek, Raziye Ozturk; Acar, Burcin

    2008-01-01

    This research study aims to examine the effectiveness of a problem-based learning (PBL) on 9th grade students' understanding of intermolecular forces (dipole-dipole forces, London dispersion forces and hydrogen bonding). The student's alternate conceptions about intermolecular bonding and their beliefs about PBL were also measured. Seventy-eight…

  6. Development of Tuning Fork Based Probes for Atomic Force Microscopy

    Science.gov (United States)

    Jalilian, Romaneh; Yazdanpanah, Mehdi M.; Torrez, Neil; Alizadeh, Amirali; Askari, Davood

    2014-03-01

    This article reports on the development of tuning fork-based AFM/STM probes in NaugaNeedles LLC for use in atomic force microscopy. These probes can be mounted on different carriers per customers' request. (e.g., RHK carrier, Omicron carrier, and tuning fork on a Sapphire disk). We are able to design and engineer tuning forks on any type of carrier used in the market. We can attach three types of tips on the edge of a tuning fork prong (i.e., growing Ag2Ga nanoneedles at any arbitrary angle, cantilever of AFM tip, and tungsten wire) with lengths from 100-500 μm. The nanoneedle is located vertical to the fork. Using a suitable insulation and metallic coating, we can make QPlus sensors that can detect tunneling current during the AFM scan. To make Qplus sensors, the entire quartz fork will be coated with an insulating material, before attaching the nanoneedle. Then, the top edge of one prong is coated with a thin layer of conductive metal and the nanoneedle is attached to the fork end of the metal coated prong. The metal coating provides electrical connection to the tip for tunneling current readout and to the electrodes and used to read the QPlus current. Since the amount of mass added to the fork is minimal, the resonance frequency spectrum does not change and still remains around 32.6 KHz and the Q factor is around 1,200 in ambient condition. These probes can enhance the performance of tuning fork based atomic microscopy.

  7. Final Environmental Assessment: To Relocate Air Force Explosive Ordnance Disposal Administrative Complex at Eglin Air Force Base

    Science.gov (United States)

    2006-10-01

    Trips PM10E = .0022 * Trips COE = .262 * Trips Year 2010 and beyond: VOCE = .012 * Trips NOxE = .013 * Trips PM10E = .0022 * Trips COE...Air Force Base, Florida To convert from pounds per day to tons per year: VOC (tons/yr) = VOCE * DPYII/2000 NOx (tons/yr) = NOxE * DPYII/2000

  8. Environmental Assessment for Construction of Security Forces Training Facilities and Force Protection Upgrades at Schriever Air Force Base, Colorado

    Science.gov (United States)

    2003-01-01

    former ranches (CNHP, 2000). Isolated populations of the noxious weeds Canada thistle (Cirsium arvense) and musk thistle (Carduus nutans) are...resulted in the identification of four jurisdictional wetlands out of nine on-Base sites examined. Based on the re-examination of these nine sites

  9. Chiral EFT based nuclear forces: Achievements and challenges

    CERN Document Server

    Machleidt, R

    2016-01-01

    During the past two decades, chiral effective field theory has become a popular tool to derive nuclear forces from first principles. Two-nucleon interactions have been worked out up to sixth order of chiral perturbation theory and three-nucleon forces up to fifth order. Applications of some of these forces have been conducted in nuclear few- and many-body systems---with a certain degree of success. But in spite of these achievements, we are still faced with great challenges. Among them is the issue of a proper uncertainty quantification of predictions obtained when applying these forces in {\\it ab initio} calculations of nuclear structure and reactions. A related problem is the order by order convergence of the chiral expansion. We start this review with a pedagogical introduction and then present the current status of the field of chiral nuclear forces. This is followed by a discussion of representative examples for the application of chiral two- and three-body forces in the nuclear many-body system includin...

  10. Optimal tracking of a sEMG based force model for a prosthetic hand.

    Science.gov (United States)

    Potluri, Chandrasekhar; Anugolu, Madhavi; Yihun, Yimesker; Jensen, Alex; Chiu, Steve; Schoen, Marco P; Naidu, D Subbaram

    2011-01-01

    This paper presents a surface electromyographic (sEMG)-based, optimal control strategy for a prosthetic hand. System Identification (SI) is used to obtain the dynamic relation between the sEMG and the corresponding skeletal muscle force. The input sEMG signal is preprocessed using a Half-Gaussian filter and fed to a fusion-based Multiple Input Single Output (MISO) skeletal muscle force model. This MISO system model provides the estimated finger forces to be produced as input to the prosthetic hand. Optimal tracking method has been applied to track the estimated force profile of the Fusion based sEMG-force model. The simulation results show good agreement between reference force profile and the actual force.

  11. Simulation of flood hydrographs for Georgia streams

    Science.gov (United States)

    Inman, Ernest J.

    1987-01-01

    Flood hydrographs are needed for the design of many highway drainage structures and embankments. A method for simulating these flood hydrographs at ungaged sites in Georgia is presented in this report. The O'Donnell method was used to compute unit hydrographs and lagtimes for 355 floods at 80 gaging stations. An average unit hydrograph and an average lagtime were computed for each station. These average unit hydrographs were transformed to unit hydrographs having durations of one-fourth, one-third, one-half, and three-fourths lagtime, then reduced to dimensionless terms by dividing the time by lagtime and the discharge by peak discharge. Hydrographs were simulated for these 355 floods and their widths were compared with the widths of the observed hydrographs at 50 and 75 percent of peak flow. The dimensionless hydrograph based on one-half lagtime duration provided the best fit of the observed data. Multiple regression analysis was then used to define relations between lagtime and certain physical basin characteristics; of these characteristics, drainage area and slope were found to be significant for the rural-stream equations and drainage area, slope, and impervious area were found to be significant for the Atlanta urban-stream equation. A hydrograph can be simulated from the dimensionless hydrograph, the peak discharge of a specific recurrence interval, and the lagtime obtained from regression equations for any site in Georgia having a drainage area of less than 500 square miles. For simulating hydrographs at sites having basins larger than 500 square miles, the U.S. Geological Survey computer model CONROUT can be used. This model routes streamflow from an upstream channel location to a user-defined location downstream. The product of CONROUT is a simulated discharge hydrograph for the downstream site that has a peak discharge of a specific recurrence interval.

  12. Muscle force estimation with surface EMG during dynamic muscle contractions: a wavelet and ANN based approach.

    Science.gov (United States)

    Bai, Fengjun; Chew, Chee-Meng

    2013-01-01

    Human muscle force estimation is important in biomechanics studies, sports and assistive devices fields. Therefore, it is essential to develop an efficient algorithm to estimate force exerted by muscles. The purpose of this study is to predict force/torque exerted by muscles under dynamic muscle contractions based on continuous wavelet transform (CWT) and artificial neural networks (ANN) approaches. Mean frequency (MF) of the surface electromyography (EMG) signals power spectrum was calculated from CWT. ANN models were trained to derive the MF-force relationships from the subset of EMG signals and the measured forces. Then we use the networks to predict the individual muscle forces for different muscle groups. Fourteen healthy subjects (10 males and 4 females) were voluntarily recruited in this study. EMG signals were collected from the biceps brachii, triceps, hamstring and quadriceps femoris muscles to evaluate the proposed method. Root mean square errors (RMSE) and correlation coefficients between the predicted forces and measured actual forces were calculated.

  13. FORCE RIPPLE SUPPRESSION TECHNOLOGY FOR LINEAR MOTORS BASED ON BACK PROPAGATION NEURAL NETWORK

    Institute of Scientific and Technical Information of China (English)

    ZHANG Dailin; CHEN Youping; AI Wu; ZHOU Zude; KONG Ching Tom

    2008-01-01

    Various force disturbances influence the thrust force of linear motors when a linear motor (LM) is running. Among all of force disturbances, the force ripple is the dominant while a linear motor runs in low speed. In order to suppress the force ripple, back propagation(BP) neural network is proposed to learn the function of the force ripple of linear motors, and the acquisition method of training samples is proposed based on a disturbance observer. An off-line BP neural network is used mainly because of its high running efficiency and the real-time requirement of the servo control system of a linear motor. By using the function, the force ripple is on-line compensated according to the position of the LM. The experimental results show that the force ripple is effectively suppressed by the compensation of the BP neural network.

  14. Cell Adhesion on Dynamic Supramolecular Surfaces Probed by Fluid Force Microscopy-Based Single-Cell Force Spectroscopy.

    Science.gov (United States)

    Sankaran, Shrikrishnan; Jaatinen, Leena; Brinkmann, Jenny; Zambelli, Tomaso; Vörös, Janos; Jonkheijm, Pascal

    2017-04-25

    Biomimetic and stimuli-responsive cell-material interfaces are actively being developed to study and control various cell-dynamics phenomena. Since cells naturally reside in the highly dynamic and complex environment of the extracellular matrix, attempts are being made to replicate these conditions in synthetic biomaterials. Supramolecular chemistry, dealing with noncovalent interactions, has recently provided possibilities to incorporate such dynamicity and responsiveness in various types of architectures. Using a cucurbit[8]uril-based host-guest system, we have successfully established a dynamic and electrochemically responsive interface for the display of the integrin-specific ligand, Arg-Gly-Asp (RGD), to promote cell adhesion. Due to the weak nature of the noncovalent forces by which the components at the interface are held together, we expected that cell adhesion would also be weaker in comparison to traditional interfaces where ligands are usually immobilized by covalent linkages. To assess the stability and limitations of our noncovalent interfaces, we performed single-cell force spectroscopy studies using fluid force microscopy. This technique enabled us to measure rupture forces of multiple cells that were allowed to adhere for several hours on individual substrates. We found that the rupture forces of cells adhered to both the noncovalent and covalent interfaces were nearly identical for up to several hours. We have analyzed and elucidated the reasons behind this result as a combination of factors including the weak rupture force between linear Arg-Gly-Asp and integrin, high surface density of the ligand, and increase in effective concentration of the supramolecular components under spread cells. These characteristics enable the construction of highly dynamic biointerfaces without compromising cell-adhesive properties.

  15. Privatization and management development in the healthcare sector of Georgia.

    Science.gov (United States)

    West, Daniel J; Costello, Michael; Ramirez, Bernardo

    2011-01-01

    Healthcare reforms in Georgia parallel some of the major changes made by other Central and Eastern European countries. This is especially true of efforts to privatize the health sector and secure capital investments from Western Europe. Privatization of Georgian healthcare requires an understanding of the Soviet-era healthcare system and ideological orientation. Many of the issues and problems of privatization in Georgia require new knowledge to enhance equity outcomes, improve financial performance, increase access to care and encourage healthcare competition. Training existing and future healthcare leaders in modern management theory and practice is paramount. A university based health-management education partnership model was developed and implemented between several universities in the United States and Europe, along with two Georgian universities, to address workforce demands, changing market conditions, management knowledge and leadership competencies. Health-management education concentrations were developed and implemented along with several short courses to meet market demand for trained leaders and managers.

  16. Rasch model based analysis of the Force Concept Inventory

    Science.gov (United States)

    Planinic, Maja; Ivanjek, Lana; Susac, Ana

    2010-06-01

    The Force Concept Inventory (FCI) is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear measures for persons and items from raw test scores and which can provide important insight in the structure and functioning of the test (how item difficulties are distributed within the test, how well the items fit the model, and how well the items work together to define the underlying construct). The data for the Rasch analysis come from the large-scale research conducted in 2006-07, which investigated Croatian high school students’ conceptual understanding of mechanics on a representative sample of 1676 students (age 17-18 years). The instrument used in research was the FCI. The average FCI score for the whole sample was found to be (27.7±0.4)% , indicating that most of the students were still non-Newtonians at the end of high school, despite the fact that physics is a compulsory subject in Croatian schools. The large set of obtained data was analyzed with the Rasch measurement computer software WINSTEPS 3.66. Since the FCI is routinely used as pretest and post-test on two very different types of population (non-Newtonian and predominantly Newtonian), an additional predominantly Newtonian sample ( N=141 , average FCI score of 64.5%) of first year students enrolled in introductory physics course at University of Zagreb was also analyzed. The Rasch model based analysis suggests that the FCI has succeeded in defining a sufficiently unidimensional construct for each population. The analysis of fit of data to the model found no grossly misfitting items which would degrade measurement. Some items with larger misfit and items with significantly different difficulties in the two samples of students do require further examination

  17. Vandenberg Air Force Base Upper Level Wind Launch Weather Constraints

    Science.gov (United States)

    Shafer, Jaclyn A.; Wheeler, Mark M.

    2012-01-01

    The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman III ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The maximum wind speed and 1000-ft shear values for each sounding in each subseason were determined. To accurately calculate the PoV, the AMU determined the theoretical distributions that best fit the maximum wind speed and maximum shear datasets. Ultimately it was discovered that the maximum wind speeds follow a Gaussian distribution while the maximum shear values follow a lognormal distribution. These results were applied when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition to the requirements outlined in the original task plan, the AMU also included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on day of launch. The interactive graphical user interface (GUI) for this project was developed in

  18. Rasch model based analysis of the Force Concept Inventory

    Directory of Open Access Journals (Sweden)

    Maja Planinic

    2010-03-01

    Full Text Available The Force Concept Inventory (FCI is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear measures for persons and items from raw test scores and which can provide important insight in the structure and functioning of the test (how item difficulties are distributed within the test, how well the items fit the model, and how well the items work together to define the underlying construct. The data for the Rasch analysis come from the large-scale research conducted in 2006-07, which investigated Croatian high school students’ conceptual understanding of mechanics on a representative sample of 1676 students (age 17–18 years. The instrument used in research was the FCI. The average FCI score for the whole sample was found to be (27.7±0.4%, indicating that most of the students were still non-Newtonians at the end of high school, despite the fact that physics is a compulsory subject in Croatian schools. The large set of obtained data was analyzed with the Rasch measurement computer software WINSTEPS 3.66. Since the FCI is routinely used as pretest and post-test on two very different types of population (non-Newtonian and predominantly Newtonian, an additional predominantly Newtonian sample (N=141, average FCI score of 64.5% of first year students enrolled in introductory physics course at University of Zagreb was also analyzed. The Rasch model based analysis suggests that the FCI has succeeded in defining a sufficiently unidimensional construct for each population. The analysis of fit of data to the model found no grossly misfitting items which would degrade measurement. Some items with larger misfit and items with significantly different difficulties in the two samples of students do require further

  19. Problem decomposition by mutual information and force-based clustering

    Science.gov (United States)

    Otero, Richard Edward

    The scale of engineering problems has sharply increased over the last twenty years. Larger coupled systems, increasing complexity, and limited resources create a need for methods that automatically decompose problems into manageable sub-problems by discovering and leveraging problem structure. The ability to learn the coupling (inter-dependence) structure and reorganize the original problem could lead to large reductions in the time to analyze complex problems. Such decomposition methods could also provide engineering insight on the fundamental physics driving problem solution. This work forwards the current state of the art in engineering decomposition through the application of techniques originally developed within computer science and information theory. The work describes the current state of automatic problem decomposition in engineering and utilizes several promising ideas to advance the state of the practice. Mutual information is a novel metric for data dependence and works on both continuous and discrete data. Mutual information can measure both the linear and non-linear dependence between variables without the limitations of linear dependence measured through covariance. Mutual information is also able to handle data that does not have derivative information, unlike other metrics that require it. The value of mutual information to engineering design work is demonstrated on a planetary entry problem. This study utilizes a novel tool developed in this work for planetary entry system synthesis. A graphical method, force-based clustering, is used to discover related sub-graph structure as a function of problem structure and links ranked by their mutual information. This method does not require the stochastic use of neural networks and could be used with any link ranking method currently utilized in the field. Application of this method is demonstrated on a large, coupled low-thrust trajectory problem. Mutual information also serves as the basis for an

  20. Defending the Joint Force: Lessons Learned from Joint Base Balad

    Science.gov (United States)

    2011-01-01

    the enemy’s aerial power by destroying his nests and eggs on the ground than to hunt his flying birds in the air.”1 This concept is reflected in Air...in defending its own assets and those of the joint force.  1. Giulio Douhet, The Command of the Air, trans. Dino Ferrari (1942; new imprint

  1. Reconstitution of the Base Force of 1995: Plan or Placebo

    Science.gov (United States)

    1993-05-14

    forcesý,umualy RCwhchdie services mantain pewactime at bvvsh I=s thai full ulSO anl d readinis Duri ng mol~ifzaion, dumes farces mu " regenerated to A... epos Of manpower, cadre uni% stockpiled and war reserve military moats research and techniology uwsbnen triiined and experienced leadership and

  2. Rasch Model Based Analysis of the Force Concept Inventory

    Science.gov (United States)

    Planinic, Maja; Ivanjek, Lana; Susac, Ana

    2010-01-01

    The Force Concept Inventory (FCI) is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear…

  3. Installation Development Environmental Assessment at Scott Air Force Base, Illinois

    Science.gov (United States)

    2007-05-01

    part of the Proposed Action relative to sustainable building concepts. Where possible, the Air Force will incorporate sustainable building concepts...prOji;!Ct proponents to incorporate sustainable building ~:om:cpts into its construction asld renovation plans. These concepts may include the nse of

  4. Research on Evacuation Based on Social Force Model

    Science.gov (United States)

    Liu, W.; Deng, Z.; Li, W.; Lin, J.

    2017-09-01

    Crowded centers always cause personnel casualties in evacuation operations. Stampede events often occur by hit, squeeze and crush due to panic. It is of vital important to alleviate such situation. With the deepening of personnel evacuation research, more and more researchers are committed to study individual behaviors and self-organization phenomenon in evacuation process. The study mainly includes: 1, enrich the social force model from different facets such as visual, psychological, external force to descript more realistic evacuation; 2, research on causes and effects of self - organization phenomenon. In this paper, we focus on disorder motion that occurs in the crowded indoor publics, especially the narrow channel and safety exits and other special arteries. We put forward the improved social force model to depict pedestrians' behaviors, an orderly speed-stratification evacuation method to solve disorder problem, and shape-changed export to alleviate congestion. The result of this work shows an improvement of evacuation efficiency by 19.5 %. Guiding pedestrians' direction to slow down the influence of social forces has a guidance function in improving the efficiency of indoor emergency evacuation.

  5. Toward optical-tweezers-based force microscopy for airborne microparticles.

    Science.gov (United States)

    Power, Rory M; Burnham, Daniel R; Reid, Jonathan P

    2014-12-20

    Optical tweezers have found widespread application in biological and colloidal physics for the measurement of pN forces over nanometer to micrometer length scales. Similar aerosol-phase measurements of interparticle force have not been reported in spite of the potential to better resolve particle coagulation kinetics. Various refractive index mismatches in the beam path as well as the need to explicitly account for gravity and inertial particle motion provide a number of challenges that must be overcome to make such measurements tractable. In this regard, we demonstrate schemes by which the particle position and trap stiffness may be unambiguously measured using bright-field microscopy with resolution comparable with analogous condensed-phase measurements. Moreover, some of the challenges of working with highly dynamic aqueous particles are introduced and exploited to observe size-dependent phenomena in aerosol optical tweezers. Notably, when combined with cavity-enhanced Raman spectroscopy, this provides a unique opportunity to explore trapping forces over a continuum of particle size and refractive index. It is expected that the methods developed will provide a basis for the measurement of pairwise interaction forces in aerosol optical tweezers while providing a probe of fundamental airborne particle trapping dynamics.

  6. Installation Restoration Program. Phase I. Records Search, Peterson Air Force Base, Colorado.

    Science.gov (United States)

    1985-08-05

    GUNN so" a. 105VI A [ads SALIDA to(, A- I Ponce, Tous 50 2 Haswell Creek AP ’all or & Ca , Lm enross Arlington Sargent, 1 10Park IF renc Sugar 6...headquartered at Ent Air Force Base near downtown Colorado Springs, thus reopening the base. When the 15th Air Force moved to California in December 1949

  7. 2012 Oconee County, Georgia ADS80 Imagery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — All imagery was collected during the 2012 Spring flying season during leaf-off conditions for deciduous vegetation in the State of Georgia. The sun angle was at...

  8. 2013 Athens-Clarke County, Georgia Imagery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of 0.5 foot pixel resolution, four band (RGB, Near IR) orthoimages covering Athens-Clarke Georgia. An orthoimage is remotely sensed image data...

  9. Base force element method of complementary energy principle for large rotation problems

    Institute of Scientific and Technical Information of China (English)

    Yijiang Peng; Yinghua Liu

    2009-01-01

    Using the concept of the base forces, a new finite element method (base force element method, BFEM) based on the complementary energy principle is presented for accurate modeling of structures with large displacements and large rotations. First, the complementary energy of an element is described by taking the base forces as state variables, and is then separated into deformation and rotation parts for the case of large deformation. Second, the control equations of the BFEM based on the complementary energy principle are derived using the Lagrange multiplier method. Nonlinear procedure of the BFEM is then developed. Finally, several examples are analyzed to illustrate the reliability and accuracy of the BFEM.

  10. "Explaining the Gender Wage Gap in Georgia"

    OpenAIRE

    Khitarishvili, Tamar

    2009-01-01

    This paper evaluates gender wage differentials in Georgia between 2000 and 2004. Using ordinary least squares, we find that the gender wage gap in Georgia is substantially higher than in other transition countries. Correcting for sample selection bias using the Heckman approach further increases the gender wage gap. The Blinder Oaxaca decomposition results suggest that most of the wage gap remains unexplained. The explained portion of the gap is almost entirely attributed to industrial variab...

  11. Low-temperature linear thermal rectifiers based on Coriolis forces

    Science.gov (United States)

    Suwunnarat, Suwun; Li, Huanan; Fleischmann, Ragnar; Kottos, Tsampikos

    2016-04-01

    We demonstrate that a three-terminal harmonic symmetric chain in the presence of a Coriolis force, produced by a rotating platform that is used to place the chain, can produce thermal rectification. The direction of heat flow is reconfigurable and controlled by the angular velocity Ω of the rotating platform. A simple three-terminal triangular lattice is used to demonstrate the proposed principle.

  12. Georgia Teachers in Academic Laboratories: Research Experiences in the Geosciences

    Science.gov (United States)

    Barrett, D.

    2005-12-01

    The Georgia Intern-Fellowships for Teachers (GIFT) is a collaborative effort designed to enhance mathematics and science experiences of Georgia teachers and their students through summer research internships for teachers. By offering business, industry, public science institute and research summer fellowships to teachers, GIFT provides educators with first-hand exposure to the skills and knowledge necessary for the preparation of our future workforce. Since 1991, GIFT has placed middle and high school mathematics, science and technology teachers in over 1000 positions throughout the state. In these fellowships, teachers are involved in cutting edge scientific and engineering research, data analysis, curriculum development and real-world inquiry and problem solving, and create Action Plans to assist them in translating the experience into changed classroom practice. Since 2004, an increasing number of high school students have worked with their teachers in research laboratories. The GIFT program places an average of 75 teachers per summer into internship positions. In the summer of 2005, 83 teachers worked in corporate and research environments throughout the state of Georgia and six of these positions involved authentic research in geoscience related departments at the Georgia Institute of Technology, including aerospace engineering and the earth and atmospheric sciences laboratories. This presentation will review the history and the structure of the program including the support system for teachers and mentors as well as the emphasis on inquiry based learning strategies. The focus of the presentation will be a comparison of two placement models of the teachers placed in geoscience research laboratories: middle school earth science teachers placed in a 6 week research experience and high school teachers placed in 7 week internships with teams of 3 high school students. The presentation will include interviews with faculty to determine the value of these experiences

  13. Fuzzy force control of constrained robot manipulators based on impedance model in an unknown environment

    Institute of Scientific and Technical Information of China (English)

    LIU Hongyi; WANG Lei; WANG Fei

    2007-01-01

    To precisely implement the force control of robot manipulators in an unknown environment,a control strategy based on fuzzy prediction of the reference trajectory in the impedance model is developed.The force tracking experiments are executed in an open-architecture control system with different tracking velocities,different desired forces,different contact stiffnesses and different surface figurations.The corresponding force control results are compared and analyzed.The influences of unknown parameters of the environment on the contact force are analyzed based on experimental data,and the tunings of predictive scale factors are illustrated.The experimental results show that the desired trajectory in the impedance model is predicted exactly and rapidly in the cases that the contact surface is unknown,the contact stiffness changes,and the fuzzy force control algorithm has high adaptability to the unknown environment.

  14. The effects of Georgia's Choice curricular reform model on third grade science scores on the Georgia Criterion Referenced Competency Test

    Science.gov (United States)

    Phemister, Art W.

    The purpose of this study was to evaluate the effectiveness of the Georgia's Choice reading curriculum on third grade science scores on the Georgia Criterion Referenced Competency Test from 2002 to 2008. In assessing the effectiveness of the Georgia's Choice curriculum model this causal comparative study examined the 105 elementary schools that implemented Georgia's Choice and 105 randomly selected elementary schools that did not elect to use Georgia's Choice. The Georgia's Choice reading program used intensified instruction in an effort to increase reading levels for all students. The study used a non-equivalent control group with a pretest and posttest design to determine the effectiveness of the Georgia's Choice curriculum model. Findings indicated that third grade students in Non-Georgia's Choice schools outscored third grade students in Georgia's Choice schools across the span of the study.

  15. SR-71 Tail #844 Landing at Edwards Air Force Base

    Science.gov (United States)

    1996-01-01

    With distinctive heat waves trailing behind its engines, NASA Dryden Flight Research Center's SR-71A, tail number 844, lands at the Edwards AFB runway after a 1996 flight. Two SR-71 aircraft have been used by NASA as testbeds for high-speed and high-altitude aeronautical research. The aircraft, an SR-71A and an SR-71B pilot trainer aircraft, have been based here at NASA's Dryden Flight Research Center, Edwards, California. They were transferred to NASA after the U.S. Air Force program was cancelled. As research platforms, the aircraft can cruise at Mach 3 for more than one hour. For thermal experiments, this can produce heat soak temperatures of over 600 degrees Fahrenheit (F). This operating environment makes these aircraft excellent platforms to carry out research and experiments in a variety of areas -- aerodynamics, propulsion, structures, thermal protection materials, high-speed and high-temperature instrumentation, atmospheric studies, and sonic boom characterization. The SR-71 was used in a program to study ways of reducing sonic booms or over pressures that are heard on the ground, much like sharp thunderclaps, when an aircraft exceeds the speed of sound. Data from this Sonic Boom Mitigation Study could eventually lead to aircraft designs that would reduce the 'peak' overpressures of sonic booms and minimize the startling affect they produce on the ground. One of the first major experiments to be flown in the NASA SR-71 program was a laser air data collection system. It used laser light instead of air pressure to produce airspeed and attitude reference data, such as angle of attack and sideslip, which are normally obtained with small tubes and vanes extending into the airstream. One of Dryden's SR-71s was used for the Linear Aerospike Rocket Engine, or LASRE Experiment. Another earlier project consisted of a series of flights using the SR-71 as a science camera platform for NASA's Jet Propulsion Laboratory in Pasadena, California. An upward

  16. Study on the Driving Forces of Rocky Desertification in Guizhou Province Based on Variation Coefficient Method

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    [Objective] The aim was to study the driving forces of rocky desertification in Guizhou Province. [Method] Based on GIS and RS technology, the main driving forces of rocky desertification in Guizhou Province were analyzed by means of correlation analysis and variation coefficient method, and then the distribution of rocky desertification in Guizhou Province was assessed synthetically. [Result] The main driving forces of rocky desertification in Guizhou Province were vegetation cover, rainfall, peasant incom...

  17. Research of a Novel Three-dimensional Force Flexible Tactile Sensor Based on Conductive Rubber

    Directory of Open Access Journals (Sweden)

    Fei Xu

    2010-09-01

    Full Text Available A novel three-dimensional force flexible tactile sensor using conductive rubber with "overall injection molding" technique is presented. The sensor is based on conductive rubber’s force-sensitive property. The sensor is flexible and can measure 3-D force. The rubber’s characteristics, the sensor’s structure and its principle are described. The results of simulation will be also presented.

  18. 77 FR 5781 - Record of Decision for the Air Space Training Initiative Shaw Air Force Base, South Carolina...

    Science.gov (United States)

    2012-02-06

    ... Department of the Air Force Record of Decision for the Air Space Training Initiative Shaw Air Force Base... Decision (ROD). SUMMARY: On December 9, 2011, the United States Air Force signed the ROD for the Airspace Training Initiative Shaw Air Force Base, South Carolina Final Environmental Impact Statement (EIS). The...

  19. Compliant landing of a trotting quadruped robot based on hybrid motion/force robust control

    Institute of Scientific and Technical Information of China (English)

    郎琳; 王剑; 韦庆; 马宏绪

    2016-01-01

    A compliant landing strategy for a trotting quadruped robot on unknown rough terrains based on contact force control is presented. Firstly, in order to lower the disturbance caused by the landing impact force, a landing phase is added between the swing phase and the stance phase, where the desired contact force is set as a small positive constant. Secondly, the joint torque optimization of the stance legs is formulated as a quadratic programming (QP) problem subject to equality and inequality/bound constraints. And a primal-dual dynamical system solver based on linear variational inequalities (LVI) is applied to solve this QP problem. Furthermore, based on the optimization results, a hybrid motion/force robust controller is designed to realize the tracking of the contact force, while the constraints of the stance feet landing angles are fulfilled simultaneously. Finally, the experiments are performed to validate the proposed methods.

  20. Physics-Based Visual Characterization of Molecular Interaction Forces.

    Science.gov (United States)

    Hermosilla, Pedro; Estrada, Jorge; Guallar, Victor; Ropinski, Timo; Vinacua, Alvar; Vazquez, Pere-Pau

    2017-01-01

    Molecular simulations are used in many areas of biotechnology, such as drug design and enzyme engineering. Despite the development of automatic computational protocols, analysis of molecular interactions is still a major aspect where human comprehension and intuition are key to accelerate, analyze, and propose modifications to the molecule of interest. Most visualization algorithms help the users by providing an accurate depiction of the spatial arrangement: the atoms involved in inter-molecular contacts. There are few tools that provide visual information on the forces governing molecular docking. However, these tools, commonly restricted to close interaction between atoms, do not consider whole simulation paths, long-range distances and, importantly, do not provide visual cues for a quick and intuitive comprehension of the energy functions (modeling intermolecular interactions) involved. In this paper, we propose visualizations designed to enable the characterization of interaction forces by taking into account several relevant variables such as molecule-ligand distance and the energy function, which is essential to understand binding affinities. We put emphasis on mapping molecular docking paths obtained from Molecular Dynamics or Monte Carlo simulations, and provide time-dependent visualizations for different energy components and particle resolutions: atoms, groups or residues. The presented visualizations have the potential to support domain experts in a more efficient drug or enzyme design process.

  1. Finite Element Response Sensitivity Analysis: a comparison between force-based and Displacement-Based Frame Element Models

    OpenAIRE

    Barbato, Michele; Conte, J P

    2005-01-01

    This paper focuses on a comparison between displacement-based and force-based elements for static and dynamic response sensitivity analysis of frame type structures. Previous research has shown that force-based frame elements are superior to classical displacement-based elements enabling, at no significant additional computational costs, a drastic reduction in the number of elements required for a given level of accuracy in the simulated response. The present work shows that this advantage of...

  2. Interrogation of Single Synthetic Polymer Chains and Polysaccharides by AFM-Based Force Spectroscopy

    NARCIS (Netherlands)

    Giannotti, M.I.; Vancso, Gyula J.

    2007-01-01

    This contribution reviews selected mechanical experiments on individual flexible macromolecules using single-molecule force spectroscopy (SMFS) based on atomic force microscopy. Focus is placed on the analysis of elasticity and conformational changes in single polymer chains upon variation of the ex

  3. Lightweight-compact variable-gap undulator with force cancellation system based on multipole monolithic magnets

    Science.gov (United States)

    Kinjo, Ryota; Kagamihata, Akihiro; Seike, Takamitsu; Kishimoto, Hikaru; Ohashi, Haruhiko; Yamamoto, Shigeru; Tanaka, Takashi

    2017-07-01

    A lightweight-compact variable-gap undulator (LCVGU) having the force-cancellation system based on the multipole monolithic magnets (MMMs) has been developed. The LCVGU is free from the heavy mechanical frames, which is a fundamental element specific to conventional variable-gap undulators (VGUs) because of a strong attractive force, and thus the cost and time for construction and installation are expected to be significantly reduced; the MMMs counteract the strong attractive force in a cost-effective manner. Results of mechanical tests and magnetic-field measurements of two prototype LCVGUs equipped with the proposed force cancellation system have revealed the comparable performance with the conventional VGUs.

  4. Measurement of nano particle adhesion by atomic force microscopy using probability theory based analysis

    Science.gov (United States)

    Geiger, D.; Schrezenmeier, I.; Roos, M.; Neckernuss, T.; Lehn, M.; Marti, O.

    2017-05-01

    We present a method to detect adhesive forces of nano particles by analysis of the distribution of measured lateral forces. The measurement protocol is suitable for all types of atomic force microscopes with a lateral force channel. Lateral forces are measured, in constant normal force contact mode, by scanning of substrates decorated with nano beads. By using probability theory, geometry based measurement errors are compensated and the real adhesion force is determined within a given confidence interval. The theoretical model can be adapted for particles with arbitrary shape and distribution of adhesion forces. It is applied to the adhesion problem of spherical particles with a Gaussian distribution of adhesion forces. We analyze the measured force distribution qualitatively and quantitatively. The theory predicts a systematic underestimation of the mean value of any particle adhesion measurement done by lateral pushing. Real measurement data of 50 nm diameter silica nano beads on silicon substrate is used to test the theoretical model for plausibility by means of information theory.

  5. Carbon fibre tips for scanning probe microscopy based on quartz tuning fork force sensors

    Energy Technology Data Exchange (ETDEWEB)

    Castellanos-Gomez, A; Agrait, N; Rubio-Bollinger, G, E-mail: gabino.rubio@uam.es [Departamento de Fisica de la Materia Condensada (C-III), Universidad Autonoma de Madrid, Campus de Cantoblanco, 28049 Madrid (Spain)

    2010-04-09

    We report the fabrication and the characterization of carbon fibre tips for use in combined scanning tunnelling and force microscopy based on piezoelectric quartz tuning fork force sensors. We find that the use of carbon fibre tips results in a minimum impact on the dynamics of quartz tuning fork force sensors, yielding a high quality factor and, consequently, a high force gradient sensitivity. This high force sensitivity, in combination with high electrical conductivity and oxidation resistance of carbon fibre tips, make them very convenient for combined and simultaneous scanning tunnelling microscopy and atomic force microscopy measurements. Interestingly, these tips are quite robust against occasionally occurring tip crashes. An electrochemical fabrication procedure to etch the tips is presented that produces a sub-100-nm apex radius in a reproducible way which can yield high resolution images.

  6. Extended neural network-based scheme for real-time force tracking with magnetorheological dampers

    DEFF Research Database (Denmark)

    Weber, Felix; Bhowmik, Subrata; Høgsberg, Jan Becker

    2014-01-01

    This paper validates numerically and experimentally a new neural network-based real-time force tracking scheme for magnetorheological (MR) dampers on a five-storey shear frame with MR damper. The inverse model is trained with absolute values of measured velocity and force because the targeted...... current is a positive quantity. The validation shows accurate results except of small current spikes when the desired force is in the vicinity of the residual MR damper force. In the closed-loop, higher frequency components in the current are triggered by the transition of the actual MR damper force from...... the pre-yield to the post-yield region. A control-oriented approach is presented to compensate for these drawbacks. The resulting control force tracking scheme is validated for the emulation of viscous damping, clipped viscous damping with negative stiffness, and friction damping with negative stiffness...

  7. Optical fibre bragg gratings based magnetic force measurement of magnetic bearings

    Science.gov (United States)

    Ding, Guoping; Zhou, Zude; Hu, Yefa; Zhou, Jianhua

    2008-12-01

    Magnetic bearings are typical electromechanical systems of high performance. Current-displacement-force relationship between stator and rotor is an important research topic of magnetic bearings. The critical issue is to realize magnetic force online dynamic measurement. This paper presents a novel method on magnetic force measurement of magnetic bearings with optical fibre bragg gratings (FBG), which realizes a non-contact and online force measurement with simple configuration, good noise immunity even when the rotor is running. A novel micro force transducer is designed and fabricated, which is mounted within the stator magnetic pole. To obtain current-displacement-force relationship a FBG based magnetic force measurement test rig is setup to simulate magnetic bearing working states as the stator coils currents, air gap between stator and rotor, rotor speed is adjustable. Magnetic force is measured under three classifications of test conditions and test results are presented. The measurement data show good consistency with the theory analysis and calculation, which means that the FBG based magnetic force measurement is available and of good accuracy.

  8. A comparative study of selected Georgia elementary principals' perceptions of environmental knowledge

    Science.gov (United States)

    Campbell, Joyce League

    This study sought to establish baseline data on environmental knowledge, opinions, and perceptions of elementary principals and to make comparisons based on academic success rankings of schools and to national results. The self-reported study looked at 200 elementary principals in the state of Georgia. The population selected for the study included principals from the 100 top and 100 bottom academically ranked elementary schools as reported in the Georgia Public Policy Foundation Report Card for Parents. Their scores on the NEETF/Roper Environmental Knowledge Survey were compared between these two Georgia groups and to a national sample. Georgia elementary principals' scores were compared to environmental programs evident in their schools. The two Georgia groups were also compared on environmental opinion and perception responses on mandates, programs in schools and time devoted to these, environmental education as a priority, and the impact of various factors on the strength of environmental studies in schools. Georgia elementary principals leading schools at the bottom of the academic performance scale achieved environmental knowledge scores comparable to the national sample. However, principals of academically successful schools scored significantly higher on environmental knowledge than their colleagues from low performing schools (p education curriculum for Georgia. The two groups were comparable on distributions of time devoted to environmental education across grade levels; however, principals from the more successful schools reported significantly (p education as an instructional priority in their schools; principals supervising successful school programs viewed environmental education as a higher priority. These successful principals also recognized the importance of both administrator and staff interest as influencing factors and ranked these two variables as strongly impacting the success or failure of environmental initiatives in schools. Comparison of

  9. Some issues on atomic force microscopy based surface characterization

    Institute of Scientific and Technical Information of China (English)

    CHEN Yu-hang; HUANG Wen-hao

    2007-01-01

    Influences of tip radius and sampling interval on applying atomic force microscopy(AFM)in quantitative surface evaluations are investigated by numerical simulations and experiments. Several evaluation parameters of surfaces ranging from amplitude to functional parameters are studied. Numerical and experimental results are in good agreements. The accuracy of estimating tip radius on random rough surface with Gaussian distribution of heights using a blind reconstruction method is also discussed theoretically. It is found that the accuracy is greatly depending on the ratio of actual tip radius to rootmean-square (rms) radius of curvature. To obtain an accurate estimation of tip radius under Gaussian rough surface, the ratio has to be larger than 3/2.

  10. Detailed Performance Calculations: Georgia Institute of Technology Group, Appendix E

    Science.gov (United States)

    1984-01-01

    Conditions for system intercomparison; signal strength evaluation; background total source strength; signal-to-noise ratio; performance of present Georgia Tech system; and special comments on current Georgia Tech system are discussed.

  11. Georgia Black Bear Project Report and Status Update

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A 2009 synopsis of black bear populations throughout Georgia (including the south Georgia population) for the purposes of determining distribution and population...

  12. Mechanically induced silyl ester cleavage under acidic conditions investigated by AFM-based single-molecule force spectroscopy in the force-ramp mode.

    Science.gov (United States)

    Schmidt, Sebastian W; Pill, Michael F; Kersch, Alfred; Clausen-Schaumann, Hauke; Beyer, Martin K

    2014-01-01

    AFM-based dynamic single-molecule force spectroscopy was used to stretch carboxymethylated amylose (CMA) polymers, which have been covalently tethered between a silanized glass substrate and a silanized AFM tip via acid-catalyzed ester condensation at pH 2.0. Rupture forces were measured as a function of temperature and force loading rate in the force-ramp mode. The data exhibit significant statistical scattering, which is fitted with a maximum likelihood estimation (MLE) algorithm. Bond rupture is described with a Morse potential based Arrhenius kinetics model. The fit yields a bond dissociation energy De = 35 kJ mol(-1) and an Arrhenius pre-factor A = 6.6 × 10(4) s(-1). The bond dissociation energy is consistent with previous experiments under identical conditions, where the force-clamp mode was employed. However, the bi-exponential decay kinetics, which the force-clamp results unambiguously revealed, are not evident in the force-ramp data. While it is possible to fit the force-ramp data with a bi-exponential model, the fit parameters differ from the force-clamp experiments. Overall, single-molecule force spectroscopy in the force-ramp mode yields data whose information content is more limited than force-clamp data. It may, however, still be necessary and advantageous to perform force-ramp experiments. The number of successful events is often higher in the force-ramp mode, and competing reaction pathways may make force-clamp experiments impossible.

  13. Exploring Homophobia in Tbilisi, Georgia.

    Science.gov (United States)

    Mestvirishvili, Maia; Zurabishvili, Tinatin; Iakobidze, Tamar; Mestvirishvili, Natia

    2017-01-01

    The purpose of this study is to determine statistical predictors of homophobic attitudes among the residents of Tbilisi, Georgia. We analyze 2013 survey data from a representative sample of the Tbilisi adult population. Residents were asked about their attitudes, beliefs, and political and social values in the context of the May 17, 2013 attack on LGBT activists on the International Day Against Homophobia and Transphobia (IDAHOT). Findings show that homophobia is significantly predicted by male gender, lower levels of education, acceptance of social inequality, nonliberal attitudes, and perceiving homosexuals as a "threat to national security." However, psychological perceptions and personal experiences also indirectly influence homophobic attitudes: the findings suggest that males report homophobic attitudes more often than females do and tend to be even more homophobic when they believe that homosexuality is inborn rather than acquired. The study also found that people without liberal attitudes tend to be more homophobic when they have personal contacts with homosexuals. This article highlights the need for a more comprehensive approach to education and the promotion of liberal values as well as legal equality for LGBTQ individuals to decrease the level of homophobia in Georgian society and, specifically, in Tbilisi.

  14. Hybrid Force Control Based on ICMAC for an Astronaut Rehabilitative Training Robot

    Directory of Open Access Journals (Sweden)

    Lixun Zhang

    2012-08-01

    Full Text Available A novel Astronaut Rehabilitative Training Robot (ART based on a cable‐driven mechanism is represented in this paper. ART, a typical passive force servo system, can help astronauts to bench press in a microgravity environment. The purpose of this paper is to design controllers to eliminate the surplus force caused by an astronaut’s active movements. Based on the dynamics modelling of the cable‐driven unit, a hybrid force controller based on improved credit assignment CMAC (ICMAC is presented. A planning method for the cable tension is proposed so that the dynamic load produced by the ART can realistically simulate the gravity and inertial force of the barbell in a gravity environment. Finally, MATLAB simulation results of the man‐machine cooperation system are provided in order to verify the effectiveness of the proposed control strategy. The simulation results show that the hybrid control method based on the structure invariance principle can inhibit the surplus force and that ICMAC can improve the dynamic performance of the passive force servo system. Furthermore, the hybrid force controller based on ICMAC can ensure the stability of the system.

  15. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report presents information concerning field procedures employed during the monitoring, well construction, well purging, sampling, and well logging at the Wright-Patterson Air Force Base. Activities were conducted in an effort to evaluate ground water contamination.

  16. 2008 Northwest Florida Water Management District (NWFWMD) Lidar: Eglin Air Force Base, Walton County, FL

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In the summer of 2008, the Northwest Florida Water Management District collected lidar data over a portion of Walton County, FL (Eglin Air force Base) to support...

  17. Temporal Geophysical Investigations of the FT-2-Plume at the Wurtsmith Air Force Base, Oscoda, Michigan

    Science.gov (United States)

    The decommissioned Wurtsmith Air Force Base former Fire Training Cell (FT-02) facility has been the focus of several geophysical investigations. After several decades of fire training exercises, significant amounts of hydrocarbons and some solvents seeped into the subsurface cont...

  18. 2008 Northwest Florida Water Management District Lidar: Eglin Air Force Base, Walton County, FL

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In the summer of 2008, the Northwest Florida Water Management District collected lidar data over a portion of Walton County, FL (Eglin Air force Base) to support...

  19. Improving the Recreational Fishery on Malmstrom Air Force Base

    Science.gov (United States)

    2010-08-01

    29 3.9.1 History of Malmstrom AFB...3.9.1 History of Malmstrom AFB Construction for an Army Air Corps base east of Great Falls began in 1942. Known as Great Falls Army Air Base, its...Bottom dwelling; Kootenai River Kootenai River population Grizzly Bear Ursus arctos horribilis T Alpine/subalpine coniferous

  20. 30 CFR 910.700 - Georgia Federal program.

    Science.gov (United States)

    2010-07-01

    ..., Enviromental Protection Division, pertaining to solid waste management. (5) Georgia Seed Laws and Rules and....700 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE GEORGIA § 910.700 Georgia Federal...

  1. Environmental Assessment for Implementation of Expanded Bird-Aircraft Strike Hazard (BASH) Program for Moody Air Force Base and Private and Public Lands Surrounding Moody Air Force Base, Georgia

    Science.gov (United States)

    2003-09-01

    thermoregulation during the colder northern winters. The roosting locations within the ROI at Moody AFB are characterized by tall trees, primarily... Reptiles American Alligator Alligator mississippiensis T (S/A) None Eastern Indigo Snake Drymarchon corais couperi T T Gopher Tortoise Gopherus

  2. DVD Database Astronomical Manuscripts in Georgia

    Science.gov (United States)

    Simonia, I.; Simonia, Ts.; Abuladze, T.; Chkhikvadze, N.; Samkurashvili, L.; Pataridze, K.

    2016-06-01

    Little known and unknown Georgian, Persian, and Arabic astronomical manuscripts of IX-XIX centuries are kept in the centers, archives, and libraries of Georgia. These manuscripts has a form of treaties, handbooks, texts, tables, fragments, and comprises various theories, cosmological models, star catalogs, calendars, methods of observations. We investigated this large material and published DVD database Astronomical Manuscripts in Georgia. This unique database contains information about astronomical manuscripts as original works. It contains also descriptions of Georgian translations of Byzantine, Arabic and other sources. The present paper is dedicated to description of obtained results and DVD database. Copies of published DVD database are kept in collections of the libraries of: Ilia State University, Georgia; Royal Observatory, Edinburgh, UK; Congress of the USA, and in other centers.

  3. Research on Cutting Force of Turn-Milling Based on Thin-Walled Blade

    Directory of Open Access Journals (Sweden)

    Lida Zhu

    2016-01-01

    Full Text Available Turn-milling is regarded as the milling of a curved surface while rotating the workpiece around its center point, which combines effectively the advantages of both turning and milling, wherein it allows for good metal removal with the difficult-to-cut thin-walled workpieces in aviation. The objective of the present work is to study cutting force by turn-milling in cutting condition. Aiming at the deformation properties of thin-walled blade, the predicted models of rigid cutting force and flexible cutting force with ball cutter are provided, respectively, in turn-milling process. The deformation values of blade and cutter are calculated, respectively, based on the engaged trajectory by using the iterative algorithm. The rigid and flexible cutting forces are compared and the influence degrees of cutting parameters on cutting forces are analyzed. These conclusions provide theoretical foundation and reference for turn-milling mechanism research.

  4. Environmental Assessment: Multiple Projects at Laughlin Air Force Base, Texas

    Science.gov (United States)

    2006-05-17

    feet from the source. Assuming that noise from the heavy equipment radiates equally in all directions, the sound intensity diminishes inversely as the...Publico sobre el La Evaluation de lmpacto Ambiental de MUltiples Proyectos en Ia Base de Ia Fuerza Aerea Laughlin De acuerdo con el Acta Nacional de 1

  5. Vibrational analysis of ferrocyanide complex ion based on density functional force field

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sun Kyung; Lee, Choong Keun; Lee, Nam Soo [Chungbuk National Univ., Cheongju (Korea, Republic of); Lee, Sang Ho [The University of Michigan, Ann Arbor (United States)

    2002-02-01

    Vibrational properties of ferrocyanide complex ion, [Fe(CN){sub 6}]{sup 4-}, have been studied based on the force constants obtained from the density functional calculations at B3LYP/6-31G level by means of the normal mode analysis using new bond angle and linear angle internal coordinates recently developed. Vibrations of ferrocyanide were manipulated by twenty-three symmetry force constants. The angled bending deformations of C-Fe-C, the linear bending deformations of Fe-C{identical_to}N and the stretching vibrations of Fe-C have been quantitatively assigned to the calculated frequencies. The force constants in the internal coordinates employed in the modified Urey-Bradley type potential were evaluated on the density functional force field applied, and better interaction force constants in the internal coordinates have been proposed. The valence force constants in the general quadratic valence force field were also given. The stretch-stretch interaction and stretch-bending interaction constants are not sensitive to the geometrical displacement in the valence force field.

  6. FORCE FEEDBACK MODEL OF ELECTRO-HYDRAULIC SERVO TELE-OPERATION ROBOT BASED ON VELOCITY CONTROL

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The tele-operation robotic system which consists of an excavator as the construction robot, and two joysticks for operating the robot from a safe place are useful for performing restoration in damaged areas. In order to accomplish a precise task, the operator needs to feel a realistic sense of task force brought about from a feedback force between the fork glove of slave robot and unfamiliar environment. A novel force feedback model is proposed based on velocity control of cylinder to determine environment force acting" on fork glove. Namely, the feedback force is formed by the error of displacement of joystick with velocity and driving force of piston, and the gain is calculated by the driving force and threshold of driving force of hydraulic cylinder. Moreover, the variable gain improved algorithm is developed to overcome the defect for grasping soft object. Experimental results for fork glove freedom of robotic system are provided to demonstrate the developed algorithm is available for grasping soft object.

  7. Flood-prone areas and waterways, Edwards Air Force Base, California

    Science.gov (United States)

    Meyer, Robert W.; Bowers, James C.

    2002-01-01

    Edwards Air Force Base (EAFB) is in the Mojave Desert region of southern California. Although the climate in the study area is arid, occasional intense storms result in flooding on the base, damaging roads and buildings. To plan for anticipated development at EAFB, the U.S. Department of the Air Force (USAF) and the U.S. Geological Survey (USGS) began a cooperative study to locate flood-prone areas on the base. This report describes flood hazards and shows flood-prone areas of the base.

  8. Genomic analysis of highly virulent Georgia 2007/1 isolate of African swine fever virus.

    Science.gov (United States)

    Chapman, David A G; Darby, Alistair C; Da Silva, Melissa; Upton, Chris; Radford, Alan D; Dixon, Linda K

    2011-04-01

    African swine fever is widespread in Africa but has occasionally been introduced into other continents. In June 2007, African swine fever was isolated in the Caucasus Region of the Republic of Georgia and subsequently in neighboring countries (Armenia, Azerbaijan, and 9 states of the Russian Federation). Previous data for sequencing of 3 genes indicated that the Georgia 2007/1 isolate is closely related to isolates of genotype II, which has been identified in Mozambique, Madagascar, and Zambia. We report the complete genomic coding sequence of the Georgia 2007/1 isolate and comparison with other isolates. A genome sequence of 189,344 bp encoding 166 open reading frames (ORFs) was obtained. Phylogeny based on concatenated sequences of 125 conserved ORFs showed that this isolate clustered most closely with the Mkuzi 1979 isolate. Some ORFs clustered differently, suggesting that recombination may have occurred. Results provide a baseline for monitoring genomic changes in this virus.

  9. Design and Sensitivity Analysis Simulation of a Novel 3D Force Sensor Based on a Parallel Mechanism

    Directory of Open Access Journals (Sweden)

    Eileen Chih-Ying Yang

    2016-12-01

    Full Text Available Automated force measurement is one of the most important technologies in realizing intelligent automation systems. However, while many methods are available for micro-force sensing, measuring large three-dimensional (3D forces and loads remains a significant challenge. Accordingly, the present study proposes a novel 3D force sensor based on a parallel mechanism. The transformation function and sensitivity index of the proposed sensor are analytically derived. The simulation results show that the sensor has a larger effective measuring capability than traditional force sensors. Moreover, the sensor has a greater measurement sensitivity for horizontal forces than for vertical forces over most of the measurable force region. In other words, compared to traditional force sensors, the proposed sensor is more sensitive to shear forces than normal forces.

  10. Diverse Communications Project at Vandenberg Air Force Base

    Science.gov (United States)

    2008-07-25

    genetic variation, high variability in age and sex ratios , demographic stochasticity, and other random, naturally occurring events such as droughts or...modification, predation by introduced fish, bullfrogs, and feral pigs, and a loss of prey food base, particularly amphibians and fish. Unarmored...biologist(s) must follow the Declining Amphibian Population Task Force’s Code of Practice. • A USFWS approved biologist(s) must conduct a

  11. Peterson Air Force Base Transportation Plan Final Environmental Assessment

    Science.gov (United States)

    2013-03-01

    migratory transient Whooping Crane Grus Americana FE, SE No permanent habitat on Base but may migrate through area Western Burrowing owl Athene...burrowing owl (Athene cunicularia), and the ferruginous hawk (Buteo regalis). The mountain plover (Charadrius montanus) is found in nearby southern and...3.6.1 Noise Descriptors The decibel (dB) is the unit used to quantify the intensity of sound throughout all frequencies. However, the human ear

  12. Prestress Force Identification for Externally Prestressed Concrete Beam Based on Frequency Equation and Measured Frequencies

    Directory of Open Access Journals (Sweden)

    Luning Shi

    2014-01-01

    Full Text Available A prestress force identification method for externally prestressed concrete uniform beam based on the frequency equation and the measured frequencies is developed. For the purpose of the prestress force identification accuracy, we first look for the appropriate method to solve the free vibration equation of externally prestressed concrete beam and then combine the measured frequencies with frequency equation to identify the prestress force. To obtain the exact solution of the free vibration equation of multispan externally prestressed concrete beam, an analytical model of externally prestressed concrete beam is set up based on the Bernoulli-Euler beam theory and the function relation between prestress variation and vibration displacement is built. The multispan externally prestressed concrete beam is taken as the multiple single-span beams which must meet the bending moment and rotation angle boundary conditions, the free vibration equation is solved using sublevel simultaneous method and the semi-analytical solution of the free vibration equation which considered the influence of prestress on section rigidity and beam length is obtained. Taking simply supported concrete beam and two-span concrete beam with external tendons as examples, frequency function curves are obtained with the measured frequencies into it and the prestress force can be identified using the abscissa of the crosspoint of frequency functions. Identification value of the prestress force is in good agreement with the test results. The method can accurately identify prestress force of externally prestressed concrete beam and trace the trend of effective prestress force.

  13. Development of novel and sensitive sensors based on microcantilever of atomic force microscope

    Institute of Scientific and Technical Information of China (English)

    JIN Yan; WANG Kemin; JIN Rong

    2006-01-01

    Recently, the development of sensors based on microfabricated cantilevers of atomic force microscope (AFM) has attracted considerable attention from the designers of novel physical, chemical, and biological sensors. Many kinds of sensors have been developed taking the advantages of its high-resolution imaging, force measurement and force sensitivity, such as immunosensor and DNA biosensor and the sensors for detection of intermolecular interaction. This paper reviews the progress made in this field and discusses the signal transfer principles by which the design of the sensors is achieved.

  14. Hysteresis Compensation of Piezoresistive Carbon Nanotube/Polydimethylsiloxane Composite-Based Force Sensors.

    Science.gov (United States)

    Kim, Ji-Sik; Kim, Gi-Woo

    2017-01-24

    This paper provides a preliminary study on the hysteresis compensation of a piezoresistive silicon-based polymer composite, poly(dimethylsiloxane) dispersed with carbon nanotubes (CNTs), to demonstrate its feasibility as a conductive composite (i.e., a force-sensitive resistor) for force sensors. In this study, the potential use of the nanotube/polydimethylsiloxane (CNT/PDMS) as a force sensor is evaluated for the first time. The experimental results show that the electrical resistance of the CNT/PDMS composite changes in response to sinusoidal loading and static compressive load. The compensated output based on the Duhem hysteresis model shows a linear relationship. This simple hysteresis model can compensate for the nonlinear frequency-dependent hysteresis phenomenon when a dynamic sinusoidal force input is applied.

  15. Hysteresis Compensation of Piezoresistive Carbon Nanotube/Polydimethylsiloxane Composite-Based Force Sensors

    Directory of Open Access Journals (Sweden)

    Ji-Sik Kim

    2017-01-01

    Full Text Available This paper provides a preliminary study on the hysteresis compensation of a piezoresistive silicon-based polymer composite, poly(dimethylsiloxane dispersed with carbon nanotubes (CNTs, to demonstrate its feasibility as a conductive composite (i.e., a force-sensitive resistor for force sensors. In this study, the potential use of the nanotube/polydimethylsiloxane (CNT/PDMS as a force sensor is evaluated for the first time. The experimental results show that the electrical resistance of the CNT/PDMS composite changes in response to sinusoidal loading and static compressive load. The compensated output based on the Duhem hysteresis model shows a linear relationship. This simple hysteresis model can compensate for the nonlinear frequency-dependent hysteresis phenomenon when a dynamic sinusoidal force input is applied.

  16. Environmental Assessment: Proposed Photovoltaic Array, Hill Air Force Base, Utah

    Science.gov (United States)

    2008-08-28

    AFB tree removal and replacement plan (Hill 2006). The tree replacement policy is based on each tree’s diameter at breast height ( DBH ). For example...if a tree with a DBH of 10 inches was removed, it would be replaced with 10 trees each with a one-inch DBH , or any combination of trees equivalent...would not create solid or hazardous waste. Biological No effects Attempts to preserve trees could be unsuccessfuL Up to 62 trees could be Resources

  17. Georgia's Surface-Water Resources and Streamflow Monitoring Network, 2008

    Science.gov (United States)

    ,

    2008-01-01

    Surface water provides 5 billion gallons per day, or 78 percent, of the total freshwater used (including thermoelectric) in Georgia (Fanning, 2003). Climate, geology, and landforms control the natural distribution of Georgia's water resources. Georgia is a 'headwaters' State, with most of the rivers beginning in northern Georgia and increasing in size downstream (see map at right for major watersheds). Surface water is the primary source of water in the northern one-half of the State, including the Atlanta metropolitan area, where limited ground-water resources are difficult to obtain. In Georgia, periodic droughts exacerbate competition for surface-water supplies. Many areas of Georgia also face a threat of flooding because of spring frontal thunderstorms and the potential for hurricanes from both the Atlantic Ocean and Gulf of Mexico. As the population of Georgia increases, these flood risks will increase with development in flood-risk zones, particularly in the coastal region.

  18. Mental illness in metropolitan, urban and rural Georgia populations.

    Science.gov (United States)

    Reeves, William C; Lin, Jin-Mann S; Nater, Urs M

    2013-04-30

    Mental illness represents an important public health problem. Local-level data concerning mental illness in different populations (e.g., socio-demographics and residence--metropolitan/urban/rural) provides the evidence-base for public health authorities to plan, implement and evaluate control programs. This paper describes prevalence and covariates of psychiatric conditions in Georgia populations in three defined geographic areas. Data came from the Georgia population-based random-digit-dialing study investigating unwellness and chronic fatigue syndrome (CFS) in Georgia populations of three defined geographic areas (metropolitan, urban, and rural). Respondents were screened for symptoms of fatigue, sleep, cognition, and pain at household screening interviews, and a randomly selected sample completed detailed individual phone interviews. Based on the detailed phone interviews, we conducted one-day clinical evaluations of 292 detailed interview participants classified as unwell with a probable CFS (i.e. CFS-like; a functional somatic syndrome), 268 classified as other unwell, and 223 well (matched to CFS-like). Clinical evaluation included psychiatric classification by means of the Structured Clinical Interview for DSM (SCID). To derive prevalence estimates we used sample weighting to account for the complexity of the multistage sampling design. We used 2- and 3-way table analyses to examine socio-demographic and urbanicity specific associations and multiple logistic regression to calculate adjusted odds ratios. Anxiety and mood disorders were the most common psychiatric conditions. Nineteen percent of participants suffered a current anxiety disorder, 18% a mood disorder and 10% had two or more conditions. There was a significant linear trend in occurrence of anxiety or mood disorders from well to CFS-like. The most common anxiety disorders were post-traumatic stress disorder (PTSD) (6.6%) and generalized anxiety disorder (GAD) (5.8%). Logistic regression showed that

  19. EMG-to-force estimation with full-scale physiology based muscle model

    OpenAIRE

    Hayashibe, Mitsuhiro; Guiraud, David; Poignet, Philippe

    2009-01-01

    International audience; EMG-to-force estimation for voluntary muscle contraction has many applications in human-machine interaction, motion analysis, and rehabilitation robotics for prosthetic limbs or exoskeletons. EMG-based model can account for a subject's individual activation patterns to estimate muscle force. For the estimation, so-called Hill-type model has been used in most of the cases. It already has shown its promising performance, but it is still known as a phenomenological model ...

  20. Human cutaneous anthrax, Georgia 2010-2012.

    Science.gov (United States)

    Kracalik, Ian; Malania, Lile; Tsertsvadze, Nikoloz; Manvelyan, Julietta; Bakanidze, Lela; Imnadze, Paata; Tsanava, Shota; Blackburn, Jason K

    2014-02-01

    We assessed the occurrence of human cutaneous anthrax in Georgia during 2010--2012 by examining demographic and spatial characteristics of reported cases. Reporting increased substantially, as did clustering of cases near urban centers. Control efforts, including education about anthrax and livestock vaccination, can be directed at areas of high risk.

  1. Ibsen in Georgia: milestones in the reception

    Directory of Open Access Journals (Sweden)

    Kakhaber Loria

    2015-02-01

    Ibsen was and is constantly referred to in Georgian literary studies, not least in connection with Georgian writers. In post-Soviet Georgia, Ibsen is very much on the agenda, and his plays are produced and discussed as they always have been.

  2. Climate change vulnerability assessment in Georgia

    Science.gov (United States)

    Binita KC; J. Marshall Shepherd; Cassandra Johnson Gaither

    2015-01-01

    Climate change is occurring in the Southeastern United States, and one manifestation is changes in frequency and intensity of extreme events. A vulnerability assessment is performed in the state of Georgia (United States) at the county level from 1975 to 2012 in decadal increments. Climate change vulnerability is typically measured as a function of exposure to physical...

  3. Human Cutaneous Anthrax, Georgia 2010–2012

    Science.gov (United States)

    Kracalik, Ian; Malania, Lile; Tsertsvadze, Nikoloz; Manvelyan, Julietta; Bakanidze, Lela; Imnadze, Paata; Tsanava, Shota

    2014-01-01

    We assessed the occurrence of human cutaneous anthrax in Georgia during 2010–-2012 by examining demographic and spatial characteristics of reported cases. Reporting increased substantially, as did clustering of cases near urban centers. Control efforts, including education about anthrax and livestock vaccination, can be directed at areas of high risk. PMID:24447721

  4. 77 FR 51099 - Georgia Disaster #GA-00046

    Science.gov (United States)

    2012-08-23

    ... ADMINISTRATION Georgia Disaster GA-00046 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY...: 05/14/2013. ADDRESSES: Submit completed loan applications to: U.S. Small Business Administration... CONTACT: A. Escobar, Office of Disaster Assistance, U.S. Small Business Administration, 409 3rd Street...

  5. Progressive Education in Georgia: Tradition or Reality?

    Science.gov (United States)

    Kopaliani, Bella; Harnisch, Delwyn L.; Doliashvili, Nana; Guetterman, Timothy C.

    2013-01-01

    Despite differences among progressive educators, they share the conviction that democracy means active participation by all citizens in the social, political, and economic decisions of their countries. The aim of this paper is to explore how Georgia is meeting goals and perspectives of progressive education by widely implementing civic education…

  6. Jazz in Georgia Schools: Twin Residencies.

    Science.gov (United States)

    Blackman, Mark; Blackman, Gary

    1984-01-01

    A very successful artist-in-education program in which jazz musicians introduced elementary students in Augusta (Georgia) to jazz music is described. Students were involved in many activities, including instrumental improvisation, singing, reading staff notation, choreography, and composing jazz. (RM)

  7. Sixty Years of Creationism in Georgia.

    Science.gov (United States)

    Saladin, Kenneth S.

    1983-01-01

    Examines sociopolitical conditions that allowed pro-creationist and anti-evolutionist movements to thrive in Georgia and other southern States. Describes efforts by leading citizens to influence legislation toward propagation of the creationist philosophy, especially in education. Stresses the need for scientists and educators to oppose…

  8. MODELING MERCURY FATE IN SEVEN GEORGIA WATERSHEDS

    Science.gov (United States)

    Field and modeling studies were conducted in support of total maximum daily loads (TMDLs)for mercury in six south Georgia rivers and the Savannah River. Mercury is introduced to these rivers primarily by atmospheric deposition, with minor point source loadings. To produce mercu...

  9. Sixty Years of Creationism in Georgia.

    Science.gov (United States)

    Saladin, Kenneth S.

    1983-01-01

    Examines sociopolitical conditions that allowed pro-creationist and anti-evolutionist movements to thrive in Georgia and other southern States. Describes efforts by leading citizens to influence legislation toward propagation of the creationist philosophy, especially in education. Stresses the need for scientists and educators to oppose…

  10. Milkweed, stink bugs, and Georgia cotton

    Science.gov (United States)

    In peanut-cotton farmscapes in Georgia, stink bugs, i.e., Nezara viridula (L.)(Say) and Chinavia hilaris (Say), develop in peanut and then disperse at the crop-to-crop interface to feed on fruit in cotton. The main objective of this study was to examine the influence of a habitat of tropical milkwe...

  11. Competition on the Georgia Education Marketplace

    Science.gov (United States)

    Gagnidze, Archil; Maglakelidze, Shorena

    2017-01-01

    Georgia implemented a nationwide, full scale school voucher program in 2005. The new voucher plan was designed with the intent to provide equitable distribution and efficient utilization of financial and human resources. By introducing the voucher scheme, the government hoped to promote competition among public as well as private schools to push…

  12. Detecting and Reducing Science Teacher Candidate’s (STC) Misconception About Motion and Force By Using Force Concept Inventory (FCI) and problem Based Learning (PBL)

    Science.gov (United States)

    Oktarisa, Y.; Utami, I. S.; Denny, Y. R.

    2017-02-01

    This study has been done to 34 science teacher candidates of Teachers’ Training and Education Faculty of Sultan Ageng Tirtayasa University at their first year of study during 2015-2016 school years. This research focused on student’s misconception about motion and force and how Problem Based Learning (PBL) reducing it. Diagnostic test of misconception about motion and force has been detected by using Force Concept Inventory (FCI). FCI had been used in pretest and posttest, and to find the reducing of students’ misconception N-Gain pretest and posttest of each student had been calculated. Quasi experiment one group pretest and posttest had been used as the research method, and Problem Based Learning (PBL) used as the treatment of manipulation. After two weeks learning motion and force with PBL approach, N-gain which obtained prove that misconception about motion and force had been reducing.

  13. A Vision-Based Approach for Estimating Contact Forces: Applications to Robot-Assisted Surgery

    Directory of Open Access Journals (Sweden)

    C. W. Kennedy

    2005-01-01

    Full Text Available The primary goal of this paper is to provide force feedback to the user using vision-based techniques. The approach presented in this paper can be used to provide force feedback to the surgeon for robot-assisted procedures. As proof of concept, we have developed a linear elastic finite element model (FEM of a rubber membrane whereby the nodal displacements of the membrane points are measured using vision. These nodal displacements are the input into our finite element model. In the first experiment, we track the deformation of the membrane in real-time through stereovision and compare it with the actual deformation computed through forward kinematics of the robot arm. On the basis of accurate deformation estimation through vision, we test the physical model of a membrane developed through finite element techniques. The FEM model accurately reflects the interaction forces on the user console when the interaction forces of the robot arm with the membrane are compared with those experienced by the surgeon on the console through the force feedback device. In the second experiment, the PHANToM haptic interface device is used to control the Mitsubishi PA-10 robot arm and interact with the membrane in real-time. Image data obtained through vision of the deformation of the membrane is used as the displacement input for the FEM model to compute the local interaction forces which are then displayed on the user console for providing force feedback and hence closing the loop.

  14. Distributed forcing of the flow past a blunt-based axisymmetric bluff body

    Science.gov (United States)

    Jardin, Thierry; Bury, Yannick

    2014-06-01

    In this paper, we address the influence of a blowing-/suction-type distributed forcing on the flow past a blunt-based axisymmetric bluff body by means of direct numerical simulations. The forcing is applied via consecutive blowing and suction slots azimuthally distributed along the trailing edge of the bluff body. We examine the impact of the forcing wavelength, amplitude and waveform on the drag experienced by the bluff body and on the occurrence of the reflectional symmetry preserving and reflectional symmetry breaking wake modes, for Reynolds numbers 800 and 1,000. We show that forcing the flow at wavelengths inherent to the unforced flow drastically damps drag oscillations associated with the vortex shedding and vorticity bursts, up to their complete suppression. The overall parameter analysis suggests that this damping results from the surplus of streamwise vorticity provided by the forcing that tends to stabilize the ternary vorticity lobes observed at the aft part of the bluff body. In addition, conversely to a blowing-type or suction-type forcing, the blowing-/suction-type forcing involves strong nonlinear interactions between locally decelerated and accelerated regions, severely affecting both the mean drag and the frequencies representative of the vortex shedding and vorticity bursts.

  15. Force-based optimization of pseudopotentials for non-equilibrium configurations

    Science.gov (United States)

    Brock, Casey N.; Paikoff, Brandon C.; Md Sallih, Muhammad I.; Tackett, Alan R.; Walker, D. Greg

    2016-04-01

    We have used a multi-objective genetic algorithm to optimize pseudopotentials for force accuracy and computational efficiency. Force accuracy is determined by comparing interatomic forces generated using the pseudopotentials and forces generated using the full-potential linearized augmented-plane wave method. This force-based optimization approach is motivated by applications where interatomic forces are important, including material interfaces, crystal defects, and molecular dynamics. Our method generates Pareto sets of optimized pseudopotentials containing various compromises between accuracy and efficiency. We have tested our method for LiF, Si0.5Ge0.5, and Mo and compared the performance of our pseudopotentials with pseudopotentials available from the ABINIT library. We show that the optimization can generate pseudopotentials with comparable accuracy (in terms of force matching and equation of state) to pseudopotentials in the literature while sometimes significantly improving computational efficiency. For example, we generated pseudopotentials for one system tested that reduced computational work by 71% without loss of accuracy. These results suggest our method can be used to generate pseudopotentials on demand that are tuned for a user's specific application, affording gains in computational efficiency.

  16. Experimental study of frost heaving force based on transient shock response using piezoceramic sensors

    Science.gov (United States)

    Wang, Ruolin; Peng, Tongxiao; Wang, Ming L.

    2016-04-01

    In seasonally frozen soil regions, the frost heaving problem made it difficult to monitor or evaluate the pile safety for long term. So far, no mature tool can be utilized to monitor the frost heaving force, which was unevenly distributed along the pile. In this paper, a piezoceramic sensing based transient excitation response approach was proposed to monitor the frost heaving force in real time. Freeze-thaw cycles can result in great changes of soil engineering properties, including the frost heaving force. So, the freeze-thaw cycle was repeated fourth to study its effect. In the experiment, transient horizontal shock on the top of the pile will be detected by the 6 PZT sensors glued on the pile. The signal data received by the 6 PZT sensors can be used to illustrate the frost heaving force distribution along the pile. Moisture content effect is also one of the important reasons that cause the variation of soil mechanical properties. So three different moisture content (6%, 12%, 18%) testing soil were used in this experiment to detect the variance of the frost heaving force. An energy indicator was developed to quantitatively evaluate the frost heaving force applied on the pile. The experimental results showed that the proposed method was effective in monitoring the uneven distribution of frost heaving force along the pile.

  17. Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces.

    Science.gov (United States)

    Engelhardt, Christoph; Malfroy Camine, Valérie; Ingram, David; Müllhaupt, Philippe; Farron, Alain; Pioletti, Dominique; Terrier, Alexandre

    2015-01-01

    The estimation of muscle forces in musculoskeletal shoulder models is still controversial. Two different methods are widely used to solve the indeterminacy of the system: electromyography (EMG)-based methods and stress-based methods. The goal of this work was to evaluate the influence of these two methods on the prediction of muscle forces, glenohumeral load and joint stability after total shoulder arthroplasty. An EMG-based and a stress-based method were implemented into the same musculoskeletal shoulder model. The model replicated the glenohumeral joint after total shoulder arthroplasty. It contained the scapula, the humerus, the joint prosthesis, the rotator cuff muscles supraspinatus, subscapularis and infraspinatus and the middle, anterior and posterior deltoid muscles. A movement of abduction was simulated in the plane of the scapula. The EMG-based method replicated muscular activity of experimentally measured EMG. The stress-based method minimised a cost function based on muscle stresses. We compared muscle forces, joint reaction force, articular contact pressure and translation of the humeral head. The stress-based method predicted a lower force of the rotator cuff muscles. This was partly counter-balanced by a higher force of the middle part of the deltoid muscle. As a consequence, the stress-based method predicted a lower joint load (16% reduced) and a higher superior-inferior translation of the humeral head (increased by 1.2 mm). The EMG-based method has the advantage of replicating the observed cocontraction of stabilising muscles of the rotator cuff. This method is, however, limited to available EMG measurements. The stress-based method has thus an advantage of flexibility, but may overestimate glenohumeral subluxation.

  18. Design and Synthesis of Distillation Systems using a Driving Force Based Approach

    DEFF Research Database (Denmark)

    Bek-Pedersen, Erik; Gani, Rafiqul

    2004-01-01

    A new integrated framework for synthesis, design and operation of distillation-based separation schemes is presented here. This framework is based on the driving force approach, which provides a measure of the differences in chemical/physical properties between two co-existing phases in a separat...

  19. Environmental Assessment for Proposed Utility Corridors at Edwards Air Force Base, California

    Science.gov (United States)

    2016-07-01

    Edwards Air Force Base, California CNPS California Native Plant Society CO Carbon monoxide CO2 Carbon dioxide CO2e Carbon dioxide equivalent mass ...corridors include existing easements, north-south and east-west traversing the Base and take into consideration current easements, communication ...73 3.7.3 Wildlife Communities

  20. Obstetric Provider Maldistribution: Georgia, USA, 2011.

    Science.gov (United States)

    Spelke, Bridget; Zertuche, Adrienne D; Rochat, Roger

    2016-07-01

    Objectives In 2010, Georgia had the nation's highest maternal mortality rate, sixteenth highest infant mortality rate, and a waning obstetrician/gynecologist (ob/gyn) workforce. Statewide ob/gyn workforce data, however, masked obstetric-specific care shortages and regional variation in obstetric services. The Georgia Maternal and Infant Health Research Group thereby assessed each Georgia region's obstetric provider workforce to identify service-deficient areas. Methods We identified 63 birthing facilities in the 82 Primary Care Service Areas (PCSAs) outside metropolitan Atlanta and interviewed nurse managers and others to assess the age, sex, and expected departure year of each delivering professional. Using accepted annual delivery rates of 155 per obstetrician (OB), 100 per certified nurse midwife (CNM), and 70 per family medicine physician (FP) we converted obstetric providers into "OB equivalents" to standardize obstetric services available in any given area. Using facility births and computed OB equivalents (contemporary and 2020 estimates), we calculated current and projected average annual births per provider (AABP) for each PCSA, categorizing its obstetric provider workforce as "adequate" (AABP  166). We mapped results using ArcGIS. Results Of 82 surveyed PCSAs, 52 % (43) were deficient in obstetric care; 16 % (13) had a shortage and 37 % (30) lacked obstetric providers entirely. There were no delivering FPs in 89 % (73) of PCSAs and no CNMs in 70 % (56). If Georgia fails to recruit delivering providers, 72 % (58/77) of PCSAs will have deficient or no obstetric care by 2020. Conclusions Obstetric provider shortages in Georgia hinder access to prenatal and delivery services. Care-deficient areas will expand if recruitment and retention of delivering professionals does not improve.

  1. Grapevine phenology and climate change in Georgia

    Science.gov (United States)

    Cola, G.; Failla, O.; Maghradze, D.; Megrelidze, L.; Mariani, L.

    2016-10-01

    While the climate of Western Europe has been deeply affected by the abrupt climate change that took place in the late `1980s of the twentieth century, a similar signal is detected only few years later, in 1994, in Georgia. Grapevine phenology is deeply influenced by climate and this paper aimed to analyze how phenological timing changed before and after the climatic change of 1994. Availability of thermal resources in the two climatic phases for the five altitudinal belts in the 0-1250-m range was analyzed. A phenological dataset gathered in two experimental sites during the period 2012-2014, and a suitable thermal dataset was used to calibrate a phenological model based on the normal approach and able to describe BBCH phenological stages 61 (beginning of flowering), 71 (fruit set), and 81 (veraison). Calibration was performed for four relevant Georgian varieties (Mtsvane Kakhuri, Rkatsiteli, Ojaleshi, and Saperavi). The model validation was performed on an independent 3-year dataset gathered in Gorizia (Italy). Furthermore, in the case of variety Rkatsiteli, the model was applied to the 1974-2013 thermal time series in order to obtain phenological maps of the Georgian territory. Results show that after the climate change of 1994, Rkatsiteli showed an advance, more relevant at higher altitudes where the whole increase of thermal resource was effectively translated in phenological advance. For instance the average advance of veraison was 5.9 days for 250-500 m asl belt and 18.1 days for 750-1000 m asl). On the other hand, at lower altitudes, phenological advance was depleted by superoptimal temperatures. As a final result, some suggestions for the adaptation of viticultural practices to the current climatic phase are provided.

  2. Development of a quartz tuning-fork-based force sensor for measurements in the tens of nanoNewton force range during nanomanipulation experiments

    Energy Technology Data Exchange (ETDEWEB)

    Oiko, V. T. A., E-mail: oiko@ifi.unicamp.br; Rodrigues, V.; Ugarte, D. [Instituto de Física “Gleb Wataghin,” Univ. Estadual de Campinas (UNICAMP), Campinas 13083-859 (Brazil); Martins, B. V. C. [Department of Physics, University of Alberta, Edmonton, Alberta T6G 2R3 (Canada); Silva, P. C. [Laboratório Nacional de Nanotecnologia, CNPEM, Campinas 13083-970 (Brazil)

    2014-03-15

    Understanding the mechanical properties of nanoscale systems requires new experimental and theoretical tools. In particular, force sensors compatible with nanomechanical testing experiments and with sensitivity in the nN range are required. Here, we report the development and testing of a tuning-fork-based force sensor for in situ nanomanipulation experiments inside a scanning electron microscope. The sensor uses a very simple design for the electronics and it allows the direct and quantitative force measurement in the 1–100 nN force range. The sensor response is initially calibrated against a nN range force standard, as, for example, a calibrated Atomic Force Microscopy cantilever; subsequently, applied force values can be directly derived using only the electric signals generated by the tuning fork. Using a homemade nanomanipulator, the quantitative force sensor has been used to analyze the mechanical deformation of multi-walled carbon nanotube bundles, where we analyzed forces in the 5–40 nN range, measured with an error bar of a few nN.

  3. Finite Element Method Based Modeling for Prediction of Cutting Forces in Micro-end Milling

    Science.gov (United States)

    Pratap, Tej; Patra, Karali

    2017-02-01

    Micro-end milling is one of the widely used processes for producing micro features/components in micro-fluidic systems, biomedical applications, aerospace applications, electronics and many more fields. However in these applications, the forces generated in the micro-end milling process can cause tool vibration, process instability and even cause tool breakage if not minimized. Therefore, an accurate prediction of cutting forces in micro-end milling is essential. In this work, a finite element method based model is developed using ABAQUS/Explicit 6.12 software for prediction of cutting forces in micro-end milling with due consideration of tool edge radius effect, thermo-mechanical properties and failure parameters of the workpiece material including friction behaviour at tool-chip interface. Experiments have been performed for manufacturing of microchannels on copper plate using 500 µm diameter tungsten carbide micro-end mill and cutting forces are acquired through a dynamometer. Predicted cutting forces in feed and cross feed directions are compared with experimental results and are found to be in good agreements. Results also show that FEM based simulations can be applied to analyze size effects of specific cutting forces in micro-end milling process.

  4. A Large Area Tactile Sensor Patch Based on Commercial Force Sensors

    Directory of Open Access Journals (Sweden)

    Alfonso García-Cerezo

    2011-05-01

    Full Text Available This paper reports the design of a tactile sensor patch to cover large areas of robots and machines that interact with human beings. Many devices have been proposed to meet such a demand. These realizations are mostly custom-built or developed in the lab. The sensor of this paper is implemented with commercial force sensors. This has the benefit of a more foreseeable response of the sensor if its behavior is understood as the aggregation of readings from all the individual force sensors in the array. A few reported large area tactile sensors are also based on commercial sensors. However, the one in this paper is the first of this kind based on the use of polymeric commercial force sensing resistors (FSR as unit elements of the array or tactels, which results in a robust sensor. The paper discusses design issues related to some necessary modifications of the force sensor, its assembly in an array, and the signal conditioning. The patch has 16 × 9 force sensors mounted on a flexible printed circuit board with a spatial resolution of 18.5 mm. The force range of a tactel is 6 N and its sensitivity is 0.6 V/N. The array is read at a rate of 78 frames per second. Finally, two simple application examples are also carried out with the sensor mounted on the forearm of a rescue robot that communicates with the sensor through a CAN bus.

  5. Two Roadmaps, One Destination: The Economic Progress Paradigm in Teacher Education Accountability in Georgia and Missouri

    Science.gov (United States)

    Nichols, Joseph R., Jr.; Cuenca, Alexander

    2014-01-01

    The current accountability conversation in teacher education is the direct result of the policy paradigms that shape our understandings of schooling and reform. The authors present cases from Georgia and Missouri illustrating how these policy paradigms have resulted in outcomes-based accountability initiatives for teacher education. Specifically,…

  6. Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics

    Science.gov (United States)

    Noh, Yohan; Bimbo, Joao; Sareh, Sina; Wurdemann, Helge; Fraś, Jan; Chathuranga, Damith Suresh; Liu, Hongbin; Housden, James; Althoefer, Kaspar; Rhode, Kawal

    2016-01-01

    This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor’s main advantages are: (1) Low power consumption; (2) low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges); (3) the ability to be embedded into different mechanical structures; (4) miniaturisation; (5) simple manufacture and customisation to fit a wide-range of robot systems; and (6) low-cost fabrication and assembly of sensor structure. For these reasons, the proposed multi-axis force/torque sensor can be used in a wide range of application areas including medical robotics, manufacturing, and areas involving human–robot interaction. This paper shows the application of our concept of a force/torque sensor to flexible continuum manipulators: A cylindrical MIS (Minimally Invasive Surgery) robot, and includes its design, fabrication, and evaluation tests. PMID:27869689

  7. Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics.

    Science.gov (United States)

    Noh, Yohan; Bimbo, Joao; Sareh, Sina; Wurdemann, Helge; Fraś, Jan; Chathuranga, Damith Suresh; Liu, Hongbin; Housden, James; Althoefer, Kaspar; Rhode, Kawal

    2016-11-17

    This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor's main advantages are: (1) Low power consumption; (2) low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges); (3) the ability to be embedded into different mechanical structures; (4) miniaturisation; (5) simple manufacture and customisation to fit a wide-range of robot systems; and (6) low-cost fabrication and assembly of sensor structure. For these reasons, the proposed multi-axis force/torque sensor can be used in a wide range of application areas including medical robotics, manufacturing, and areas involving human-robot interaction. This paper shows the application of our concept of a force/torque sensor to flexible continuum manipulators: A cylindrical MIS (Minimally Invasive Surgery) robot, and includes its design, fabrication, and evaluation tests.

  8. The Simulation of the Brush Stroke Based on Force Feedback Technology

    Directory of Open Access Journals (Sweden)

    Chao Guo

    2015-01-01

    Full Text Available A novel simulation method of the brush stroke is proposed by applying force feedback technology to the virtual painting process. The relationship between force and the brush deformation is analyzed, and the spring-mass model is applied to construct the brush model, which can realistically simulate the brush morphological changes according to the force exerted on it. According to the deformation of the brush model at a sampling point, the brush footprint between the brush and the paper is calculated in real time. Then, the brush stroke is obtained by superimposing brush footprints along sampling points, and the dynamic painting of the brush stroke is implemented. The proposed method has been successfully applied to the virtual painting system based on the force feedback technology. In this system, users can implement the painting in real time with a Phantom Desktop haptic device, which can effectively enhance reality to users.

  9. Static force transducer based on resonant piezoelectric structure: root cause investigation

    Science.gov (United States)

    Safour, Salaheddine; Bernard, Yves

    2017-05-01

    The aim of this paper is to investigate the design and the integration of a static force sensor based on a resonant bulk acoustic wave piezoelectric transducer. Experimental measurements of the electrical admittance spectrum show its dependence on the applied force. We noticed that the quality of the frequency response for a given vibration mode degrades with the increase of the applied force, which limits the force measuring range. The root cause of the response-stress dependence is investigated by means of the developed analytical model and a finite element analysis. The analysis results show that the selected operating vibration mode, the components of the structure on which the piezoelectric specimen is positioned and the boundary conditions at the contact interfaces between all the components have a direct effect on the electrical admittance spectrum. A modified structure was proposed to enhance the quality of the frequency response. The experimental tests show higher measuring range (up to 1500 N).

  10. Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics

    Directory of Open Access Journals (Sweden)

    Yohan Noh

    2016-11-01

    Full Text Available This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor’s main advantages are: (1 Low power consumption; (2 low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges; (3 the ability to be embedded into different mechanical structures; (4 miniaturisation; (5 simple manufacture and customisation to fit a wide-range of robot systems; and (6 low-cost fabrication and assembly of sensor structure. For these reasons, the proposed multi-axis force/torque sensor can be used in a wide range of application areas including medical robotics, manufacturing, and areas involving human–robot interaction. This paper shows the application of our concept of a force/torque sensor to flexible continuum manipulators: A cylindrical MIS (Minimally Invasive Surgery robot, and includes its design, fabrication, and evaluation tests.

  11. A computed torque method based attitude control with optimal force distribution for articulated body mobile robots

    Energy Technology Data Exchange (ETDEWEB)

    Fukushima, Edwardo F.; Hirose, Shigeo [Tokyo Inst. of Tech. (Japan)

    2000-05-01

    This paper introduces an attitude control scheme based in optimal force distribution using quadratic programming which minimizes joint energy consumption. This method shares similarities with force distribution for multifingered hands, multiple coordinated manipulators and legged walking robots. In particular, an attitude control scheme was introduced inside the force distribution problem, and successfully implemented for control of the articulated body mobile robot KR-II. This is an actual mobile robot composed of cylindrical segments linked in series by prismatic joints and has a long snake-like appearance. These prismatic joints are force controlled so that each segment's vertical motion can automatically follow the terrain irregularities. An attitude control is necessary because this system acts like a system of wheeled inverted pendulum carts connected in series, being unstable by nature. The validity and effectiveness of the proposed method is verified by computer simulation and experiments with the robot KR-II. (author)

  12. Reliability-based econometrics of aerospace structural systems: Design criteria and test options. Ph.D. Thesis - Georgia Inst. of Tech.

    Science.gov (United States)

    Thomas, J. M.; Hanagud, S.

    1974-01-01

    The design criteria and test options for aerospace structural reliability were investigated. A decision methodology was developed for selecting a combination of structural tests and structural design factors. The decision method involves the use of Bayesian statistics and statistical decision theory. Procedures are discussed for obtaining and updating data-based probabilistic strength distributions for aerospace structures when test information is available and for obtaining subjective distributions when data are not available. The techniques used in developing the distributions are explained.

  13. A New Method of Desired Gait Synthesis for Biped Walking Robot Based on Ground Reaction Force

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new method of desired gait synthesis for biped walking robot based on the ground reaction force was proposed. The relation between the ground reaction force and joint motion is derived using the D'Almbert principle. In view of dynamic walking with high stability, the ZMP(Zero Moment Point)stability criterion must be considered in the desired gait synthesis. After that, the joint trajectories of biped walking robot are decided by substituting the ground reaction force into the aforesaid relation based on the ZMP criterion. The trajectory of desired ZMP is determined by a fuzzy logic based upon the body posture of biped walking robot. The proposed scheme is simulated and experimented on a 10 degree of freedom biped walking robot. The results indicate that the proposed method is feasible.

  14. Finite Element Based Stress Analysis of Seat Belt Using Integrated Force Method

    Directory of Open Access Journals (Sweden)

    Anjali Kale

    2014-06-01

    Full Text Available Integrated force method (IFM has been developed for solving various continuum mechanics problems, where all the internal forces are taken as independent variables. The system equilibrium equations (EE's are mathematically concatenated with the MATLAB based compatibility conditions (CC's to form the global set of equations. This paper explains the solution strategy of prototype seat-belt component using integrated force method. Actual seat belt component is taken here to verify IFM based FE element are readily used which is named as REC_5F_8D and REC_13F_16D where 5F and 13F reflects number of internal unknowns and 8D and 16D are number of total displacements respectively. The results for “Von Mises Stress” and Maximum Displacement using IFM based formulation and compared with ANSYS.

  15. Cadherin-Based Intercellular Adhesions Organize Epithelial Cell-Matrix Traction Forces

    CERN Document Server

    Mertz, Aaron F; Banerjee, Shiladitya; Goldstein, Jill; Rosowski, Kathryn R; Niessen, Carien M; Marchetti, M Cristina; Dufresne, Eric R; Horsley, Valerie

    2012-01-01

    Cell--cell and cell-matrix adhesions play essential roles in the function of tissues. There is growing evidence for the importance of crosstalk between these two adhesion types, yet little is known about the impact of these interactions on the mechanical coupling of cells to the extracellular-matrix (ECM). Here, we combine experiment and theory to reveal how intercellular adhesions modulate forces transmitted to the ECM. In the absence of cadherin-based adhesions, primary mouse keratinocytes within a colony appear to act independently, with significant traction forces extending throughout the colony. In contrast, with strong cadherin-based adhesions, keratinocytes in a cohesive colony localize traction forces to the colony periphery. Through genetic or antibody-mediated loss of cadherin expression or function, we show that cadherin-based adhesions are essential for this mechanical cooperativity. A minimal physical model in which cell--cell adhesions modulate the physical cohesion between contractile cells is ...

  16. Spatial information recognizing of ocean eddies based on virtual force field and its application

    Institute of Scientific and Technical Information of China (English)

    LI Ce; DU Yunyan; SU Fenzhen; YANG Xiaomei; XU Jun

    2007-01-01

    A new approach to detecting ocean eddies automatically from remote sensing imageries based on the ocean eddy's eigen-pattern in remote sensing imagery and "force field-based shape extracting method" is proposed. First, the analysis on extracting eddies' edges from remote sensing imagery using conventional edge detection arithmetic operators is performed and returns digitized vector edge data as a result. Second, attraction forces and fusion forces between edge curves were analyzed and calculated based on the vector eddy edges. Thirdly, the virtual significant spatial patterns of eddy were detected automatically using iterative repetition followed by optimized rule. Finally, the spatial form auto-detection of different types of ocean eddies was done using satellite images.The study verified that this is an effective way to identify and detect the ocean eddy with a complex form.

  17. Comparative analysis of Multiple risks in the Western part of Georgia

    Science.gov (United States)

    Tsereteli, N.; Chelidze, T.; Varazanashvili, O.; Amiranashvili, A.

    2009-04-01

    Georgia is prone to catastrophes. In the last two decades, there have occurred the following natural disasters: (a) Avalanches in Svaneti and Khevsureti, (b) landslides in the mountainous Achara, floods, (c) hurricane and drought in West and East Georgia, (d) Racha earthquake of 1991 and (e) the Tbilisi Earthquake of 2002. These phenomena are very special both from ecological and from social-economical points of view. By the disaster risk index obtained by the UNDP, Georgia is similar to countries with medium and high level risk. Therefore, natural disasters in Georgia are considered as a negative factor in the development process of the country. This implies the necessity of more active actions by all possible means to reduce the risk of natural disasters at each level and maintain the sustainable economic development of the country, including good education at the universities and schools for real understanding of natural hazards. The main goal of the work here is the assessment of 12 widespread natural disasters and multiple risks for political districts in West Georgia. These natural disasters include earthquakes, landslides, avalanches, floods, mudflows, droughts, hurricanes, lightning, hail, glaze, freezes, mists. The research was based on the following steps: (a) Creation of electronic detailed databases of natural disasters that occurred in Georgia. These databases consist of the parameters of such hazardous phenomena class that caused natural disasters. (b) Quantitative investigation of energetic and spatial-time regularities of 12 natural disasters for the territory of Georgia. Estimation of people and environment (technosphere) vulnerability. (c) Elaboration of mathematical models and algorithms of disasters multiple risks taking into account the concrete conditions: (i) Sharing and generalization of gathered experience in the world. This allows more proper and wide comparison of the multiple risks of Caucasus countries; (ii) Taking into account the

  18. Prediction of adsorption of small molecules in porous materials based on ab initio force field method

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Computational prediction of adsorption of small molecules in porous materials has great impact on the basic and applied research in chemical engineering and material sciences. In this work,we report an approach based on grand canonical ensemble Monte Carlo(GCMC) simulations and ab initio force fields. We calculated the adsorption curves of ammonia in ZSM-5 zeolite and hydrogen in MOF-5(a metal-organic-framework material). The predictions agree well with experimental data. Because the predictions are based on the first principle force fields,this approach can be used for the adsorption prediction of new molecules or materials without experimental data as guidance.

  19. High Precision Prediction of Rolling Force Based on Fuzzy and Nerve Method for Cold Tandem Mill

    Institute of Scientific and Technical Information of China (English)

    JIA Chun-yu; SHAN Xiu-ying; NIU Zhao-ping

    2008-01-01

    The rolling force model for cold tandem mill was put forward by using the Elman dynamic recursive network method, based on the actual measured data. Furthermore, a good assumption is put forward, which brings a full universe of discourse self-adjusting factor fuzzy control, closed-loop adjusting, based on error feedback and expertise into a rolling force prediction model, to modify prediction outputs and improve prediction precision and robustness. The simulated results indicate that the method is highly effective and the prediction precision is better than that of the traditional method. Predicted relative error is less than ±4%, so the prediction is high precise for the cold tandem mill.

  20. Environmental Assessment of the Realignment of Units at McChord Air Force Base, Washington

    Science.gov (United States)

    1989-07-01

    McChord AFB (Department of the Air Force 1986). 3.2.4 Water Resources Clovis Creek and Morey Creek are the primary surface water features at McChord AFB...Morey Creek originates at Spanaway Lake east of the base and merges Swith Clovis Creek at n the eastern portion of the base. Clovis Creek has been...estimated at $166.5 million (Department of the Air Force 1988). 3.2.8 Cultura - Resources In the area within and adjacent to McChord AFB, there is evidence

  1. OPTIMAL DESIGN OF A 6-AXIS FORCE TRANSDUCER BASED ON STEWART PLATFORM RELATED TO SENSITIVITY ISOTROPY

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The design method of a 6-axis force robot's transducer based on the Stewart platform is detailed.For this purpose, the sensitivity isotropy evaluation criteria of the transducer are defined, and by the aid of computer, the relationships between the criteria and the parameters of all the transducers based on the Stewart platform are investigated within the geometric model of the solution space, which can provide the theoretical background for the optimal construction design of the 6-axis force transducer related to the sensitivity isotropy.

  2. A radial distribution function-based open boundary force model for multi-centered molecules

    KAUST Repository

    Neumann, Philipp

    2014-06-01

    We derive an expression for radial distribution function (RDF)-based open boundary forcing for molecules with multiple interaction sites. Due to the high-dimensionality of the molecule configuration space and missing rotational invariance, a computationally cheap, 1D approximation of the arising integral expressions as in the single-centered case is not possible anymore. We propose a simple, yet accurate model invoking standard molecule- and site-based RDFs to approximate the respective integral equation. The new open boundary force model is validated for ethane in different scenarios and shows very good agreement with data from periodic simulations. © World Scientific Publishing Company.

  3. Transformation of Taiwan’s Reserve Force

    Science.gov (United States)

    2017-01-01

    This report also includes an appendix with a brief comparative analysis of reserve force transformation in other countries (Finland, Singapore, Japan ...retention.18 Barring developments that offer Taiwan a substantive role in the emerging Asian security architecture and that make available, with...forces of other countries, we briefly reviewed the reserve forces of Finland, Singapore, Japan , and Georgia. We find that Finland and Singapore

  4. Accelerated SPECT Monte Carlo Simulation Using Multiple Projection Sampling and Convolution-Based Forced Detection

    Science.gov (United States)

    Liu, Shaoying; King, Michael A.; Brill, Aaron B.; Stabin, Michael G.; Farncombe, Troy H.

    2010-01-01

    Monte Carlo (MC) is a well-utilized tool for simulating photon transport in single photon emission computed tomography (SPECT) due to its ability to accurately model physical processes of photon transport. As a consequence of this accuracy, it suffers from a relatively low detection efficiency and long computation time. One technique used to improve the speed of MC modeling is the effective and well-established variance reduction technique (VRT) known as forced detection (FD). With this method, photons are followed as they traverse the object under study but are then forced to travel in the direction of the detector surface, whereby they are detected at a single detector location. Another method, called convolution-based forced detection (CFD), is based on the fundamental idea of FD with the exception that detected photons are detected at multiple detector locations and determined with a distance-dependent blurring kernel. In order to further increase the speed of MC, a method named multiple projection convolution-based forced detection (MP-CFD) is presented. Rather than forcing photons to hit a single detector, the MP-CFD method follows the photon transport through the object but then, at each scatter site, forces the photon to interact with a number of detectors at a variety of angles surrounding the object. This way, it is possible to simulate all the projection images of a SPECT simulation in parallel, rather than as independent projections. The result of this is vastly improved simulation time as much of the computation load of simulating photon transport through the object is done only once for all projection angles. The results of the proposed MP-CFD method agrees well with the experimental data in measurements of point spread function (PSF), producing a correlation coefficient (r2) of 0.99 compared to experimental data. The speed of MP-CFD is shown to be about 60 times faster than a regular forced detection MC program with similar results. PMID:20811587

  5. Final Programmatic Environmental Assessment for Base-Wide Military Construction Planning at Kirtland Air Force Base, New Mexico

    Science.gov (United States)

    2013-11-01

    whiptail lizard (Aspidoscelis inornata), short- horned lizard (Phrynosoma douglassi), lesser earless lizard (Holbrookia maculata), bull snake (Pituophis...Peterson Field Guide to Western Birds. Houghton Mifflin Pub: Boston. pp. 432. Reid, F.A. 2006. Mammals of North America . Houghton Mifflin...ASSESSMENT FOR BASE-WIDE MILITARY CONSTRUCTION PLANNING AT KIRTLAND AIR FORCE BASE, NEW MEXICO Introduction : In accordance with the National

  6. DNA-based digital tension probes reveal integrin forces during early cell adhesion

    Science.gov (United States)

    Zhang, Yun; Ge, Chenghao; Zhu, Cheng; Salaita, Khalid

    2014-10-01

    Mechanical stimuli profoundly alter cell fate, yet the mechanisms underlying mechanotransduction remain obscure because of a lack of methods for molecular force imaging. Here to address this need, we develop a new class of molecular tension probes that function as a switch to generate a 20- to 30-fold increase in fluorescence upon experiencing a threshold piconewton force. The probes employ immobilized DNA hairpins with tunable force response thresholds, ligands and fluorescence reporters. Quantitative imaging reveals that integrin tension is highly dynamic and increases with an increasing integrin density during adhesion formation. Mixtures of fluorophore-encoded probes show integrin mechanical preference for cyclized RGD over linear RGD peptides. Multiplexed probes with variable guanine-cytosine content within their hairpins reveal integrin preference for the more stable probes at the leading tip of growing adhesions near the cell edge. DNA-based tension probes are among the most sensitive optical force reporters to date, overcoming the force and spatial resolution limitations of traction force microscopy.

  7. Effectiveness of growth regulators, based on the heterylcarbon acid, on forcing of Tulips (Tulips HD

    Directory of Open Access Journals (Sweden)

    Derevianko Natalia

    2016-03-01

    Full Text Available The main factor in growing flowers for forcing is their rate of growth, on account of the fact that in short period of time it is necessary to grow quickly a large number of flowers and to cut them simultaneously. The influence of growth regulators (GR based on heterylcarbon acid on the forcing of tulips in greenhouse conditions (winter period was studied. It was determined that the application of GR1 of the basic within tulip’s forcing period reduces in average to 5 days (from all period of forcing. In case of application GR2 the tulip’s forcing period also reduces to 3 days (from all period of forcing compared with a control group of tulips. The ability of the plant growth regulators under research to accelerate growing properties of flowers is associated with the presence of heterylcarbon acid and potassium ions in their structure of substances. These growth regulators relate to non-toxic compounds and possess antioxidant properties.

  8. AFM-based force spectroscopy measurements of mature amyloid fibrils of the peptide glucagon

    Energy Technology Data Exchange (ETDEWEB)

    Dong Mingdong; Hovgaard, Mads Bruun; Mamdouh, Wael; Xu Sailong; Otzen, Daniel Erik; Besenbacher, Flemming [Interdisciplinary Nanoscience Center (iNANO), University of Aarhus, DK-8000 Aarhus C (Denmark)], E-mail: dao@inano.dk, E-mail: fbe@inano.dk

    2008-09-24

    We report on the mechanical characterization of individual mature amyloid fibrils by atomic force microscopy (AFM) and AFM-based single-molecule force spectroscopy (SMFS). These self-assembling materials, formed from the 29-residue amphiphatic peptide hormone glucagon, were found to display a reversible elastic behaviour. Based on AFM morphology and SMFS studies, we suggest that the observed elasticity is due to a force-induced conformational transition which is reversible due to the {beta}-helical conformation of protofibrils, allowing a high degree of extension. The elastic properties of such mature fibrils contribute to their high stability, suggesting that the internal hydrophobic interactions of amyloid fibrils are likely to be of fundamental importance in the assembly of amyloid fibrils and therefore for the understanding of the progression of their associated pathogenic disorders. In addition, such biological amyloid fibril structures with highly stable mechanical properties can potentially be used to produce nanofibres (nanowires) that may be suitable for nanotechnological applications.

  9. Learning-based force servoing control of a robot with vision in an unknown environment

    Institute of Scientific and Technical Information of China (English)

    肖南峰

    2004-01-01

    A learning-based control approach is presented for force servoing of a robot with vision in an unknown environment. Firstly, mapping relationships between image features of the servoing object and the joint angles of the robot are derived and learned by a neural network. Secondly, a learning controller based on the neural network is designed for the robot to trace the object. Thirdly, a discrete time impedance control law is obtained for the force servoing of the robot,the on-line learning algorithms for three neural networks are developed to adjust the impedance parameters of the robot in the unknown environment. Lastly, wiping experiments are carried out by using a 6 DOF industrial robot with a CCD camera and a force/torque sensor in its end effector, and the experimental results confirm the effectiveness of the approach.

  10. Design of a new torque standard machine based on a torque generation method using electromagnetic force

    Science.gov (United States)

    Nishino, Atsuhiro; Ueda, Kazunaga; Fujii, Kenichi

    2017-02-01

    To allow the application of torque standards in various industries, we have been developing torque standard machines based on a lever deadweight system, i.e. a torque generation method using gravity. However, this method is not suitable for expanding the low end of the torque range, because of the limitations to the sizes of the weights and moment arms. In this study, the working principle of the torque generation method using an electromagnetic force was investigated by referring to watt balance experiments used for the redefinition of the kilogram. Applying this principle to a rotating coordinate system, an electromagnetic force type torque standard machine was designed and prototyped. It was experimentally demonstrated that SI-traceable torque could be generated by converting electrical power to mechanical power. Thus, for the first time, SI-traceable torque was successfully realized using a method other than that based on the force of gravity.

  11. A pairwise residue contact area-based mean force potential for discrimination of native protein structure

    Directory of Open Access Journals (Sweden)

    Pezeshk Hamid

    2010-01-01

    Full Text Available Abstract Background Considering energy function to detect a correct protein fold from incorrect ones is very important for protein structure prediction and protein folding. Knowledge-based mean force potentials are certainly the most popular type of interaction function for protein threading. They are derived from statistical analyses of interacting groups in experimentally determined protein structures. These potentials are developed at the atom or the amino acid level. Based on orientation dependent contact area, a new type of knowledge-based mean force potential has been developed. Results We developed a new approach to calculate a knowledge-based potential of mean-force, using pairwise residue contact area. To test the performance of our approach, we performed it on several decoy sets to measure its ability to discriminate native structure from decoys. This potential has been able to distinguish native structures from the decoys in the most cases. Further, the calculated Z-scores were quite high for all protein datasets. Conclusions This knowledge-based potential of mean force can be used in protein structure prediction, fold recognition, comparative modelling and molecular recognition. The program is available at http://www.bioinf.cs.ipm.ac.ir/softwares/surfield

  12. A Modernized UDM-600 Dynamometer-Based Setup for the Cutting Force Measurement

    Directory of Open Access Journals (Sweden)

    Ya. I. Shuliak

    2016-01-01

    Full Text Available The article considers development of a modernized UDM-600 dynamometer-based setup for measuring the cutting force components. Modernization of existing equipment to improve the method of recording the cutting force components in the automated mode is of relevance. The measuring setup allows recording the cutting force components in turning and milling, as well as the axial force and the torque in the drilling and milling operations.The article presents a block diagram and a schematic diagram of the setup to measure the cutting force components, and describes a basic principle of measuring units within the modernized setup. The developed setup uses a half-bridge strain gauge measuring circuit to record the cutting forces. To enhance the measuring circuit output voltage is used a 16-channel amplifier of LA-UN16 model with a discretely adjustable gain. To record and process electrical signals is used a data acquisition device of NI USB-6009 model, which enables transmitting the received data to a PC via USB-interface. The data acquisition device has a built-in stabilized DC power supply that is used to power the strain gauge bridges. A developed schematic diagram of the measuring setup allows us to realize this measuring device and implement its modernization.Final processing of recorded data is provided through the software developed in visual programming environment LabVIEW 9.0. The program allows us to show the real-time measuring values of the cutting force components graphically and to record the taken data to a text file.The measuring setup modernization enabled increasing measurement accuracy and reducing time for processing and analysis of experimental data obtained when measuring the cutting force components. The MT2 Department of BMSTU uses it in education and research activities and in experimental efforts and laboratory classes.

  13. Creep force modelling for rail traction vehicles based on the Fastsim algorithm

    Science.gov (United States)

    Spiryagin, Maksym; Polach, Oldrich; Cole, Colin

    2013-11-01

    The evaluation of creep forces is a complex task and their calculation is a time-consuming process for multibody simulation (MBS). A methodology of creep forces modelling at large traction creepages has been proposed by Polach [Creep forces in simulations of traction vehicles running on adhesion limit. Wear. 2005;258:992-1000; Influence of locomotive tractive effort on the forces between wheel and rail. Veh Syst Dyn. 2001(Suppl);35:7-22] adapting his previously published algorithm [Polach O. A fast wheel-rail forces calculation computer code. Veh Syst Dyn. 1999(Suppl);33:728-739]. The most common method for creep force modelling used by software packages for MBS of running dynamics is the Fastsim algorithm by Kalker [A fast algorithm for the simplified theory of rolling contact. Veh Syst Dyn. 1982;11:1-13]. However, the Fastsim code has some limitations which do not allow modelling the creep force - creep characteristic in agreement with measurements for locomotives and other high-power traction vehicles, mainly for large traction creep at low-adhesion conditions. This paper describes a newly developed methodology based on a variable contact flexibility increasing with the ratio of the slip area to the area of adhesion. This variable contact flexibility is introduced in a modification of Kalker's code Fastsim by replacing the constant Kalker's reduction factor, widely used in MBS, by a variable reduction factor together with a slip-velocity-dependent friction coefficient decreasing with increasing global creepage. The proposed methodology is presented in this work and compared with measurements for different locomotives. The modification allows use of the well recognised Fastsim code for simulation of creep forces at large creepages in agreement with measurements without modifying the proven modelling methodology at small creepages.

  14. [Force-based local navigation in robot-assisted implantation bed anlage in the lateral skull base. An experimental study].

    Science.gov (United States)

    Plinkert, P K; Federspil, P A; Plinkert, B; Henrich, D

    2002-03-01

    Excellent precision, miss of retiring, reproducibility are main characteristics of robots in the operating theatre. Because of these facts their use for surgery in the lateral scull base is of great interest. In recent experiments we determined process parameters for robot assisted reaming of a cochlea implant bed and for a mastoidectomy. These results suggested that optimizing parameters for thrilling with the robot is needed. Therefore we implemented a suitable reaming curve from the geometrical data of the implant and a force controlled process control for robot assisted reaming at the lateral scull base. Experiments were performed with an industrial robot on animal and human scull base specimen. Because of online force detection and feedback of sensory data the reaming with the robot was controlled. With increasing force values above a defined limit feed rates were automatically regulated. Furthermore we were able to detect contact of the thrill to dura mater by analyzing the force values. With the new computer program the desired implant bed was exactly prepared. Our examinations showed a successful reaming of an implant bed in the lateral scull base with a robot. Because of a force controlled reaming process locale navigation is possible and enables careful thrilling with a robot.

  15. Harmonic force microscope: A new tool for biomolecular identification and material characterization based on nanomechanical measurements

    Science.gov (United States)

    Sahin, Ozgur

    At the molecular level, physical and chemical properties of materials are tightly coupled to the mechanical properties. The potential of mechanics for interacting with matter at the nanoscale has been largely unexplored due to lack of instruments capable of performing mechanical measurements at nanometer length scales. This thesis describes nanomechanical sensing techniques and applications based on time-resolved tip-sample force measurements in tapping-mode atomic force microscopy. Tapping mode is the most successful operation mode of atomic force microscopes. Theoretical calculations presented in the first part of this thesis show that time variations of the tip-sample forces in the tapping-mode depend on the physical and chemical properties of the sample and therefore, have the potential to be used for nanomechanical measurements. Unfortunately, the force-sensing probe of the tapping-mode atomic force microscope, the vibrating cantilever, is limited in its response to the variations of forces in time within a period of oscillations. We are describing two types of special micromachined cantilevers that enable measurements of time variations of tip-sample forces: the harmonic cantilever and the coupled torsional cantilever. These special cantilevers allow sensitive mechanical measurements at the nanoscale and single molecular level. The operation of these cantilevers does not require any modifications to the existing atomic force microscopy systems. With the nanomechanical sensing techniques we have developed, we investigated phase transformations of sub-micron domains of composite polymers and observed their glass transitions for the first time. Conventional measurements on bulk properties of these samples do not provide information on the physical changes at the nanoscale. Studies on nucleic acids attached to a surface, a configuration commonly used in DNA microarray technology, showed that the hybridized DNA molecules can be detected at the single molecule

  16. Building hierarchical models of avian distributions for the State of Georgia

    Science.gov (United States)

    Howell, J.E.; Peterson, J.T.; Conroy, M.J.

    2008-01-01

    To predict the distributions of breeding birds in the state of Georgia, USA, we built hierarchical models consisting of 4 levels of nested mapping units of decreasing area: 90,000 ha, 3,600 ha, 144 ha, and 5.76 ha. We used the Partners in Flight database of point counts to generate presence and absence data at locations across the state of Georgia for 9 avian species: Acadian flycatcher (Empidonax virescens), brownheaded nuthatch (Sitta pusilla), Carolina wren (Thryothorus ludovicianus), indigo bunting (Passerina cyanea), northern cardinal (Cardinalis cardinalis), prairie warbler (Dendroica discolor), yellow-billed cuckoo (Coccyxus americanus), white-eyed vireo (Vireo griseus), and wood thrush (Hylocichla mustelina). At each location, we estimated hierarchical-level-specific habitat measurements using the Georgia GAP Analysis18 class land cover and other Geographic Information System sources. We created candidate, species-specific occupancy models based on previously reported relationships, and fit these using Markov chain Monte Carlo procedures implemented in OpenBugs. We then created a confidence model set for each species based on Akaike's Information Criterion. We found hierarchical habitat relationships for all species. Three-fold cross-validation estimates of model accuracy indicated an average overall correct classification rate of 60.5%. Comparisons with existing Georgia GAP Analysis models indicated that our models were more accurate overall. Our results provide guidance to wildlife scientists and managers seeking predict avian occurrence as a function of local and landscape-level habitat attributes.

  17. A statewide Crisis Intervention Team (CIT) initiative: evolution of the Georgia CIT program.

    Science.gov (United States)

    Oliva, Janet R; Compton, Michael T

    2008-01-01

    In late 2004, Georgia began implementation of a statewide Crisis Intervention Team (CIT) program to train a portion of its law enforcement officers to respond safely and effectively to individuals with mental illnesses who are in crisis. This overview provides a description of the evolution of the Georgia CIT, including discussions of the historical context in which the program developed; the program's vision, mission, and objectives; the importance of the multidisciplinary Georgia CIT Advisory Board; the training curriculum; the role played by state and local coordinators; the value of stakeholders' meetings; practical operations of the program; the importance of considering the adequacy of community-based and hospital-based psychiatric services; costs and funding; the program's expansion plan; and evaluation, research, and academic collaborations. These detailed descriptions of the Georgia CIT program may be useful for professionals involved in local, regional, or state CIT program planning and may provide a practical synopsis of one example of this collaborative model that is being rapidly disseminated across the U.S.

  18. Analyzing excitation forces acting on a plate based on measured acoustic pressure.

    Science.gov (United States)

    Wu, Sean F; Zhou, Pan

    2016-07-01

    This paper presents a theoretical study on "seeing" through an elastic structure to uncover the root cause of sound and vibration by using nearfield acoustical holography (NAH) and normal modes expansion. This approach is of generality because vibro-acoustic responses on the surface of a vibrating structure can always be reconstructed, exactly or approximately. With these vibro-acoustic responses, excitation forces acting on the structure can always be determined, analytically or numerically, given any set of boundary conditions. As an example, the explicit formulations for reconstructing time-harmonic excitation forces, including point, line and surface forces, and their arbitrary combinations acting on a rectangular thin plate in vacuum mounted on an infinite baffle are presented. The reason for choosing this example is that the analytic solutions to vibro-acoustic responses are available, and in-depth analyses of results are possible. Results demonstrate that this approach allows one to identify excitation forces based on measured acoustic pressures and reveal their characteristics such as locations, types and amplitudes, as if one could "see" excitation forces acting behind the plate based on acoustic pressure measured on the opposite side. This approach is extendable to general elastic structures, except that in such circumstance numerical results must be sought.

  19. A Wavelet-Based Method to Predict Muscle Forces From Surface Electromyography Signals in Weightlifting

    Institute of Scientific and Technical Information of China (English)

    Gaofeng Wei; Feng Tian; Gang Tang; Chengtao Wang

    2012-01-01

    The purpose of this study was to develop a wavelet-based method to predict muscle forces from surface electromyography (EMG) signals in vivo.The weightlifting motor task was implemented as the case study.EMG signals of biceps brachii,triceps brachii and deltoid muscles were recorded when the subject carried out a standard weightlifting motor task.The wavelet-based algorithm was used to process raw EMG signals and extract features which could be input to the Hill-type muscle force models to predict muscle forces.At the same time,the musculoskeletal model of subject's weightlifting motor task was built and simulated using the Computed Muscle Control (CMC) method via a motion capture experiment.The results of CMC were compared with the muscle force predictions by the proposed method.The correlation coefficient between two results was 0.99(p<0.01).However,the proposed method was easier and more efficiency than the CMC method.It has potential to be used clinically to predict muscle forces in vivo.

  20. Lift vs. drag based mechanisms for vertical force production in the smallest flying insects.

    Science.gov (United States)

    Jones, S K; Laurenza, R; Hedrick, T L; Griffith, B E; Miller, L A

    2015-11-01

    We used computational fluid dynamics to determine whether lift- or drag-based mechanisms generate the most vertical force in the flight of the smallest insects. These insects fly at Re on the order of 4-60 where viscous effects are significant. Detailed quantitative data on the wing kinematics of the smallest insects is not available, and as a result both drag- and lift-based strategies have been suggested as the mechanisms by which these insects stay aloft. We used the immersed boundary method to solve the fully-coupled fluid-structure interaction problem of a flexible wing immersed in a two-dimensional viscous fluid to compare three idealized hovering kinematics: a drag-based stroke in the vertical plane, a lift-based stroke in the horizontal plane, and a hybrid stroke on a tilted plane. Our results suggest that at higher Re, a lift-based strategy produces more vertical force than a drag-based strategy. At the Re pertinent to small insect hovering, however, there is little difference in performance between the two strategies. A drag-based mechanism of flight could produce more vertical force than a lift-based mechanism for insects at Re<5; however, we are unaware of active fliers at this scale.

  1. Air Force Electronic Systems Center: Reorganization Resulted in Workforce Reassignments at Hanscom Air Force Base, but Other Possible Effects Are Not Yet Known

    Science.gov (United States)

    2013-04-01

    Officer VERA/VSIP Voluntary Early Retirement Authority/Voluntary Separation Incentive Payments This is a work of the U.S. government and is not...force, Hanscom Air Force Base officials used three rounds of the Voluntary Early Retirement Authority/Voluntary Separation Incentive Payments (VERA...by early retirement , voluntary retirement, or resignation. The Homeland Security Act of 2002, Pub. L. No. 107-296, §1313(b), authorized these

  2. Environmental Assessment: 13th Street Bridge Emergency Repair and Retrofit Vandenberg Air Force Base California

    Science.gov (United States)

    2003-06-23

    23-1 Acres on Vandenberg Air Force Base. Robert 0. Gibson, Archaeologist, Paso Robles, California. Submitted toURS Corporation, Santa Barbara...Timbrook (editors). 1977. The Eye (?f the Flute: Chwnash Traditional History and Ritual, as told by Fernando Librado Kitsepmvit to John P. Harrington

  3. Space Shuttle Endeavour flares for landing at Edwards Air Force Base, California to conclude STS-100

    Science.gov (United States)

    2001-01-01

    At the conclusion of Space Shuttle Mission STS-100, Endeavour landed at Edwards Air Force Base, California, May 1, 2001. There the Orbiter would be readied by technicians at NASA's Dryden Flight Research Center for return to Kennedy Space Center, Florida, atop a 747 carrier aircraft.

  4. Landing of STS-59 Shuttle Endeavour at Edwards Air Force Base

    Science.gov (United States)

    1994-01-01

    The main landing gear of the Space Shuttle Endeavour touches down at Edwards Air Force Base to complete the 11 day STS-59/SRL-1 mission. Landing occured at 9:54 a.m., April 20, 1994. Mission duration was 11 days, 5 hours, 49 minutes.

  5. A long telephoto lens captured Space Shuttle Endeavour landing at Edwards Air Force Base, California

    Science.gov (United States)

    2001-01-01

    A long telephoto lens captured Space Shuttle Endeavour landing at Edwards Air Force Base, California, on May 1, 2001. NASA's Dryden Flight Research Center at Edwards would subsequently service the shuttle and mount it on a 747 for the ferry flight to the Kennedy Space Center in Florida.

  6. Modeling the desired direction in a force-based model for pedestrian dynamics

    CERN Document Server

    Chraibi, Mohcine; Schadschneider, Andreas; Seyfried, Armin

    2012-01-01

    We introduce an enhanced model based on the generalized centrifugal force model. Furthermore, the desired direction of pedestrians is investigated. A new approach leaning on the well-known concept of static and dynamic floor-fields in cellular automata is presented. Numerical results of the model are presented and compared with empirical data.

  7. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This report presents information related to the sampling of ground water at the Wright-Patterson Air Force Base. It is part of an investigation into possible ground water contamination. Information concerns well drilling/construction; x-ray diffraction and sampling; soil boring logs; and chain-of-custody records.

  8. Environmental Impact Analysis Process. Environmental Impact Statement for the Closure of Mather Air Force Base

    Science.gov (United States)

    1990-03-01

    the California Health and Safety Code). The Department would like to be informed of future activities and use plans associated with the Muther AFB...Page 2 cc: Lt. Col Richard Blank Chief, Environmental Management 323rd Flying Training Wing Mather Air Force Base, CA 95655-5000 Lt. Col. Jose Saenz

  9. Consequences of Forcing Consumers to Use Technology-Based Self-Service

    NARCIS (Netherlands)

    Reinders, M.J.; Dabholkar, P.A.; Frambach, R.T.

    2008-01-01

    Today, traditional full service is increasingly replaced with technology-based self-service (TBSS), sometimes with no other option for service delivery. This study develops a conceptual model to investigate the impact of forcing consumers to use TBSS. The model is tested using an experimental design

  10. Use of atomic force microscopy to quantify slip irreversibility in a nickel-base superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Risbet, M.; Feaugas, X.; Guillemer-Neel, C.; Clavel, M

    2003-09-15

    Atomic force microscopy was used to study the evolution of surface deformation during cyclic loading in a nickel-base superalloy. Cyclic slip irreversibility has been investigated using quantitative evaluation of extrusion heights and inter-band spacing. This approach is applied to formulate a microscopic crack initiation law, compared to a classical Manson-Coffin relationship.

  11. Atomic Steps with tuning-fork-based noncontact atomic force microscopy

    NARCIS (Netherlands)

    Rensen, W.H.J.; Hulst, van N.F.; Ruiter, A.G.T.; West, P.E.

    1999-01-01

    Tuning forks as tip-sample distance detectors are a promising and versatile alternative to conventional cantilevers with optical beam deflection in noncontact atomic force microscopy (AFM). Both theory and experiments are presented to make a comparison between conventional and tuning-fork-based AFM.

  12. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560...

  13. STEAM ENHANCED REMEDIATION RESEARCH FOR DNAPL IN FRACTURED ROCK, LORING AIR FORCE BASE, LIMESTONE, MAINE

    Science.gov (United States)

    This report details a research project on Steam Enhanced Remediation (SER) for the recovery of volatile organic compounds from fractured limestone that was carried out at the Quarry at the former Loring Air Force Base in Limestone, Maine. This project was carried out by USEPA, Ma...

  14. Environmental Assessment. Increase Fuel Storage Capacity, Dover Air Force Base, Delaware

    Science.gov (United States)

    2012-06-01

    in 1998. Grasshopper Sparrow 2 Observed on Bergold Farm 16 July 2003 and in 1998. Great blue heron 2 Observed many times foraging along both Pipe...ENVIRONMENTAL CONSEQUENCES Increase Fuels Capacity Dover Air Force Base, Delaware 28 calculations were derived from the same EPA software utilized to

  15. Eielson Air Force Base Infrastructure Development in Support of RED FLAG-Alaska Environmental Assessment

    Science.gov (United States)

    2007-08-01

    MAAS Colonel, USAF Vice Commander Date EIELSON AIR FORCE BASE INFRASTRUCTURE DEVELOPMENT IN SUPPORT OF RED FLAG-ALASKA...Name Address1 Address2 Address3 City State Zip Governor of Alaska Palin The Honorable Sarah 240 Main St., Ste. 300 Court Plaza Bldg. Juneau AK 99801

  16. Imaging soft samples in liquid with tuning fork based shear force microscopy

    NARCIS (Netherlands)

    Rensen, W.H.J.; van Hulst, N.F.; Kammer, S.B.

    2000-01-01

    We present a study of the dynamic behavior of tuning forks and the application of tuning fork based shear force microscopy o­n soft samples in liquid. A shift in resonance frequency and a recovery of the tip vibration amplitude have been observed upon immersion into liquid. Conservation of the

  17. Astronomy in Georgia - Present Status and Perspectives

    Science.gov (United States)

    Todua, M.

    2016-09-01

    Astronomy in Georgia is generally represented in Abastumani Astrophysical Observatory found in 1932. It is one of the leading scientific institutes in the country. Main fields of research are solar system bodies (including near-Earth asteroids), various aspects of solar physics, stellar astronomy (including binary stars and open clusters), extragalactic objects (AGNs), theoretical astrophysics, cosmology, atmospheric and solar-terrestrial physics. Several telescopes are operational today, as well as the instruments for atmospheric studies. In 2007 the Observatory was integrated with Ilia State University, merging scientific research and education which facilitated the growth of a new generation of researchers. There are groups of astronomers and astrophysicists in other Georgian universities and institutions as well. Georgian scientists collaborate with research centers and universities worldwide. Research groups participate in various international scientific projects. The interest in astronomy in Georgia has been growing, which increases future perspectives of its development in the country.

  18. Russia-Georgia Conflict and Beyond

    Institute of Scientific and Technical Information of China (English)

    Feng Yujun; Ma Zongshi

    2008-01-01

    Yet another Post 9/11 historical event indicating a significant turning point in the Post-Cold War era, Russia-Georgia conflict represents a remarkable change in the international strategy of a resurgent Russia. It also signifies that former Soviet republics are still groping for a new identity and that a new round of realignment will persist in the vast Eurasia region. The conflict reveals declining U.S. global control, flawed European integration, and NATO embarrassment. To a certain extent, it exposes chaos brought about by international nonpolarity and world governance vacuum. It also highlights what serious consequences can a double standard inflict on the principles of international law. A reasonable arrangement for global security and economic growth is therefore challenging the resolve and wisdom of international strategists. Actually fierce geopolitical rivalry for energy resources is at work behind the Russia-Georgia conflict. This will further compound the international energy strategic environment.

  19. Development of the banking system in Georgia

    OpenAIRE

    Kbiltsetskhlashvili, Tea

    2008-01-01

    Over fifteen years have passed since the beginning of the reconstruction of the transition countries' banking systems. The analysis of the development of commercial banking in Georgia and other transition countries points out several features, which are typical for the starting period of financial sector reforms. It turns out from this article that the success of the reconstruction of banking sector in certain countries differs substantially. Since the starting of reforms the Georgian banking...

  20. Data on wells in the Edwards Air Force Base area, California

    Science.gov (United States)

    Dutcher, L.C.; Bader, J.S.; Hiltgen, W.J.

    1962-01-01

    The data presented In this report were collected by the U.S. Geological Survey as a phase of the investigation of ground-water geology and hydrology of the Edwards Air Force Base area. The study was made in cooperation with the Department of the Air Force but also was coincident with the U.S. Geological Survey investigation of water wells and general hydrologic conditions throughout much of the desert region of southern California. The overall study of general hydrologic conditions in the desert is part of a cooperative program with the California Department of Water Resources.

  1. Multi-Axis Force/Torque Sensor Based on Simply-Supported Beam and Optoelectronics

    OpenAIRE

    Noh, Yohan; Bimbo, Joao; Sareh, Sina; Wurdemann, Helge; Fraś, Jan; Chathuranga, Damith Suresh; Liu, Hongbin; Housden, James; Althoefer, Kaspar; Rhode, Kawal

    2016-01-01

    This paper presents a multi-axis force/torque sensor based on simply-supported beam and optoelectronic technology. The sensor’s main advantages are: (1) Low power consumption; (2) low-level noise in comparison with conventional methods of force sensing (e.g., using strain gauges); (3) the ability to be embedded into different mechanical structures; (4) miniaturisation; (5) simple manufacture and customisation to fit a wide-range of robot systems; and (6) low-cost fabrication and assembly of s...

  2. A first-principles based force-field for Li+ and OH- in ethanolic solution.

    Science.gov (United States)

    Milek, Theodor; Meyer, Bernd; Zahn, Dirk

    2013-10-14

    We report on the development of force-field parameters for accurately modeling lithium and hydroxide ions in ethanol in solution. Based on quantum calculations of small molecular clusters mimicking the solvent structure of individual ions as well as the solvated LiOH dimer, significant improvements of off-the-shelf force-fields are obtained. The quality of our model is demonstrated by comparison to ab initio molecular dynamics of the bulk solution and to experimental data available for ethanol/water mixtures.

  3. Mountain Home Air Force Base, Idaho Geothermal Resource Assessment and Future Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2013-03-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base in early 2011 near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home Air Force Base. In conclusion, Recommendation for follow-up efforts include the following:

  4. Water resources activities, Georgia District, 1986

    Science.gov (United States)

    Casteel, Carolyn A.; Ballew, Mary D.

    1987-01-01

    The U.S. Geological Survey, through its Water Resources Division , investigates the occurrence, quantity, quality, distribution, and movement of the surface and underground water that composes the Nation 's water resources. Much of the work is a cooperative effort in which planning and financial support are shared by state and local governments and other federal agencies. This report contains a brief description of the water-resources investigations in Georgia in which the Geological Survey participates, and a list of selected references. Water-resources data for the 1985 water year for Georgia consists of records of stage, discharge, and water quality of streams; stage and contents of lakes and reservoirs; and groundwater levels. These data include discharge records for 108 gaging stations; water quality for 43 continuous stations, 109 periodic stations, and miscellaneous sites; peak stage and discharge only for 130 crest-stage partial-record stations and 44 miscellaneous sites; and water levels of 27 observation wells. Nineteen Georgia District projects are summarized. (Lantz-PTT)

  5. European Integration and Business Enviroment in Georgia

    Directory of Open Access Journals (Sweden)

    Nestan Abramishvili

    2016-02-01

    Full Text Available AbstractPaper analyzes the impact that the process of Georgia’s European integration have had on country’s business environment. A significant changes have occurred in Georgia in the last decade, which had an influence on the status of the current business environment. Especially, it is worth to mention the aspiration of the country for European Integration. Georgia has carried out a number of recommendations and requirements set by the European Union, on the way to this goal, which has changed the country's business environment.The negotiations between the EU and Georgia about the “Deep and Comprehensive Free Trade Area (DCFTA”  was officially opened on 28th February, 2012. Prior to the opening discussions about “DCFTA”, the European Commission singled out four main areas of country’s economy, where conducted fundamental reforms became precondition to open diplomacy. These sectors were: technical barriers related to the EU trade regulations, sanitary and phytosanitary measures, intellectual property rights and competition policy. In addition, the European Commission together with the International Labour Organization asked for changing of the Labour Code and directly linked implemented reforms to progress, which should be reached during the talks with Europe about “DCFTA”. Key words: Business environment, European integration, DCFTA, reforms. 

  6. Prediction of bubble detachment diameter in flow boiling based on force analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chen Deqi [Key Laboratory of Low-grade Energy Utilization Technologies and Systems (Chongqing University), Ministry of Education, Chongqing 400044 (China); Pan Liangming, E-mail: cneng@cqu.edu.cn [Key Laboratory of Low-grade Energy Utilization Technologies and Systems (Chongqing University), Ministry of Education, Chongqing 400044 (China); Ren Song [Key Laboratory of Low-grade Energy Utilization Technologies and Systems (Chongqing University), Ministry of Education, Chongqing 400044 (China)

    2012-02-15

    Highlights: Black-Right-Pointing-Pointer All the forces acting on the growing bubbles are taken into account in the model. Black-Right-Pointing-Pointer The bubble contact diameter has significant effect on bubble detachment. Black-Right-Pointing-Pointer Bubble growth force and surface tension are more significant in narrow channel. Black-Right-Pointing-Pointer A good agreement between the predicted and the measured results is achieved. - Abstract: Bubble detachment diameter is one of the key parameters in the study of bubble dynamics and boiling heat transfer, and it is hard to be measured in a boiling system. In order to predict the bubble detachment diameter, a theoretical model is proposed based on forces analysis in this paper. All the forces acting on a bubble are taken into account to establish a model for different flow boiling configurations, including narrow and conventional channels, upward, downward and horizontal flows. A correlation of bubble contact circle diameter is adopted in this study, and it is found that the bubble contact circle diameter has significant effect on bubble detachment. A new correlation taking the bubble contact circle diameter into account for the evaluation of bubble growth force is proposed in this study, and it is found that the bubble growth force and surface tension force are more significant in narrow channel when comparing with that in conventional channel. A visual experiment was carried out in order to verify present model; and the experimental data from published literature are used also. A good agreement between predicted and measured results is achieved.

  7. Environmental Assessment for the 920th Rescue Wing Beddown Patrick Air Force Base, Florida

    Science.gov (United States)

    2005-10-01

    primarily toward the Banana River. Low-levels of contaminants (e.g., VOC, petroleum hydrocarbons, and heavy metals ) have been detected in surficial...there would be a leveling off as new facilities are constructed that would be devoid of asbestos and heavy metal paint issues and won’t require...Force Base (PAFB) is located on a barrier island on the central east coast of Florida, south of the city of Cocoa Beach (see Figure 1). The main base

  8. Installation Restoration Program Records Search for March Air Force Base, California

    Science.gov (United States)

    1984-04-28

    which is bounded by the Jacinto Fault on the east and the Elsinore Fault on the west. Ground surface elevations within the March AFB bound- Z aries...approx- imately one mile south of the base. Lake Mathews, located approximately 10 miles west of the baze, is the terminal reservoir of this aqueduct...State Project water is brought into the Perris Valley via the California Aqueduct, which runs north and east of March Air Force Base. Lake Perris

  9. Atomic Force Microscopy Based Nanorobotics Modelling, Simulation, Setup Building and Experiments

    CERN Document Server

    Xie, Hui; Régnier, Stéphane; Sitti, Metin

    2012-01-01

    The atomic force microscope (AFM) has been successfully used to perform nanorobotic manipulation operations on nanoscale entities such as particles, nanotubes, nanowires, nanocrystals, and DNA since 1990s. There have been many progress on modeling, imaging, teleoperated or automated control, human-machine interfacing, instrumentation, and applications of AFM based nanorobotic manipulation systems in literature. This book aims to include all of such state-of-the-art progress in an organized, structured, and detailed manner as a reference book and also potentially a textbook in nanorobotics and any other nanoscale dynamics, systems and controls related research and education. Clearly written and well-organized, this text introduces designs and prototypes of the nanorobotic systems in detail with innovative principles of three-dimensional manipulation force microscopy and parallel imaging/manipulation force microscopy.

  10. Impedance-Based Cable Force Monitoring in Tendon-Anchorage Using Portable PZT-Interface Technique

    Directory of Open Access Journals (Sweden)

    Thanh-Canh Huynh

    2014-01-01

    Full Text Available In this paper, a portable PZT interface for tension force monitoring in the cable-anchorage subsystem is developed. Firstly, the theoretical background of the impedance-based method is presented. A few damage evaluation approaches are outlined to quantify the variation of impedance signatures. Secondly, a portable PZT interface is designed to monitor impedance signatures from the cable-anchorage subsystem. One degree-of-freedom analytical model of the PZT interface is established to explain how to represent the loss of cable force from the change in the electromechanical impedance of the PZT interface as well as reducing the sensitive frequency band by implementing the interface device. Finally, the applicability of the proposed PZT-interface technique is experimentally evaluated for cable force-loss monitoring in a lab-scaled test structure.

  11. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    Directory of Open Access Journals (Sweden)

    Antonio C. Bruno

    2013-08-01

    Full Text Available A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber shifting the reflected Bragg wavelength. The measured shift for the optical fiber used was 1.36 nm per Newton. Models were developed to optimize the magnet geometry for a specific sensor standoff distance and for particular corrosion pit depths. The sensor was able to detect corrosion pits on a fuel storage tank bottom with depths in the sub-millimeter range.

  12. EC-FORC: A New Cyclic Voltammetry Based Method for Examining Phase Transitions and Predicting Equilibrium

    CERN Document Server

    Hamad, Ibrahim Abou; Novotny, Mark A; Rikvold, Per Arne

    2007-01-01

    We propose a new, cyclic-voltammetry based experimental technique that can not only differentiate between discontinuous and continuous phase transitions in an adsorbate layer, but also quite accurately recover equilibrium behavior from dynamic analysis of systems with a continuous phase transition. The Electrochemical first-order reversal curve (EC-FORC) diagram for a discontinuous phase transition (nucleation and growth), such as occurs in underpotential deposition, is characterized by a negative region, while such a region does not exist for a continuous phase transition, such as occurs in the electrosorption of Br on Ag(100). Moreover, for systems with a continuous phase transition, the minima of the individual EC-FORCs trace the equilibrium curve, even at very high scan rates. Since obtaining experimental data for the EC-FORC method would require only a simple reprogramming of the potentiostat used in conventional cyclic-voltammetry experiments, we believe that this method has significant potential for ea...

  13. Determination of Quantum Chemistry Based Force Fields for Molecular Dynamics Simulations of Aromatic Polymers

    Science.gov (United States)

    Jaffe, Richard; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    Ab initio quantum chemistry calculations for model molecules can be used to parameterize force fields for molecular dynamics simulations of polymers. Emphasis in our research group is on using quantum chemistry-based force fields for molecular dynamics simulations of organic polymers in the melt and glassy states, but the methodology is applicable to simulations of small molecules, multicomponent systems and solutions. Special attention is paid to deriving reliable descriptions of the non-bonded and electrostatic interactions. Several procedures have been developed for deriving and calibrating these parameters. Our force fields for aromatic polyimide simulations will be described. In this application, the intermolecular interactions are the critical factor in determining many properties of the polymer (including its color).

  14. Cutting performance orthogonal test of single plane puncture biopsy needle based on puncture force

    Science.gov (United States)

    Xu, Yingqiang; Zhang, Qinhe; Liu, Guowei

    2017-04-01

    Needle biopsy is a method to extract the cells from the patient's body with a needle for tissue pathological examination. Many factors affect the cutting process of soft tissue, including the geometry of the biopsy needle, the mechanical properties of the soft tissue, the parameters of the puncture process and the interaction between them. This paper conducted orthogonal experiment of main cutting parameters based on single plane puncture biopsy needle, and obtained the cutting force curve of single plane puncture biopsy needle by studying the influence of the inclination angle, diameter and velocity of the single plane puncture biopsy needle on the puncture force of the biopsy needle. Stage analysis of the cutting process of biopsy needle puncture was made to determine the main influencing factors of puncture force during the cutting process, which provides a certain theoretical support for the design of new type of puncture biopsy needle and the operation of puncture biopsy.

  15. Cogging force rejection method of linear motor based on internal model principle

    Science.gov (United States)

    Liu, Yang; Chen, Zhenyu; Yang, Tianbo

    2015-02-01

    The cogging force disturbance of linear motor is one of the main factors affecting the positioning accuracy of ultraprecision moving platform. And this drawback could not be completely overcome by improving the design of motor body, such as location modification of permanent magnet array, or optimization design of the shape of teeth-slot. So the active compensation algorithms become prevalent in cogging force rejection area. This paper proposed a control structure based on internal mode principle to attenuate the cogging force of linear motor which deteriorated the accuracy of position, and this structure could make tracking and anti-disturbing performance of close-loop designed respectively. In the first place, the cogging force was seen as the intrinsic property of linear motor and its model constituting controlled object with motor ontology model was obtained by data driven recursive identification method. Then, a control structure was designed to accommodate tracking and anti-interference ability separately by using internal model principle. Finally, the proposed method was verified in a long stroke moving platform driven by linear motor. The experiment results show that, by employing this control strategy, the positioning error caused by cogging force was decreased by 70%.

  16. Research of three-dimensional force sensor based on multiplexed fiber Bragg grating strain sensors

    Science.gov (United States)

    Xu, Hui-Chao; Wang, Su; Miao, Xin-Gang

    2017-04-01

    Most safety problems of architectural structures are caused by structural deformation, and the structures usually deform in more than one direction. So it is important and necessary to collect the safety monitoring data from all directions. Conventional fiber Bragg grating (FBG) sensors cannot fully meet the requirements of a modern safety monitoring system in practical application. Therefore, the research of a three-dimensional (3-D) force sensor that can expand the application range of fiber optic sensing technology is necessary and significant. A 3-D force sensor based on multiplexed FBG strain sensors is proposed, which can be used to measure 3-D force on a structure under test, force distribution, and the trend of relative microdeformation. The sensor that has an integral structure with a design has been described in detail, and its sensing principle has been investigated. The results of calibration experiments show that it can accurately and effectively realize the 3-D force measurement with good linearity, repeatability, and consistency. Experimental and analytical results both demonstrate its feasibility. It can work in harsh environments due to its good stability and anti-interference ability. The sensor proposed in this paper has great engineering application value and application prospects in the field of structure health monitoring.

  17. Force analysis of pile foundation in rock slope based on upper-bound theorem of limit

    Institute of Scientific and Technical Information of China (English)

    ZHAO Ming-hua; LIU Jian-hua; LIU Dai-quan; WANG You

    2008-01-01

    Based on the characteristic that the potential sliding surfaces of rock slope are commonly in the shape of either line or fold line, analysis thought of conventional pile foundation in the flat ground under complex load condition was applied and the upper-bound theorem of limit analysis was used to compute thrust of rock layers with all possible distribution shapes. The interaction of slope and pile was considered design load in terms of slope thrust, and the finite difference method was derived to calculate inner-force and displacement of bridge pile foundation in rock slope under complex load condition. The result of example shows that the distribution model of slope thrust has certain impact on displacement and inner-force of bridge pile foundation. The maximum displacement growth rate reaches 54% and the maximum moment and shear growth rates reach only 15% and 20%, respectively, but the trends of inner-force and displacement of bridge pile foundation are basically the same as those of the conventional pile foundation in the flat ground. When the piles bear the same level lateral thrust, the distribution shapes of slope thrust have different influence on inner-force of pile foundation, especially the rectangle distribution, and the triangle thrust has the smallest displacement and inner-force of pile foundation.

  18. Ionic force field optimization based on single-ion and ion-pair solvation properties

    CERN Document Server

    Fyta, Maria; Dzubiella, Joachim; Vrbka, Lubos; Netz, Roland R

    2009-01-01

    Molecular dynamics simulations of ionic solutions depend sensitively on the force fields employed for the ions. To resolve the fine differences between ions of the same valence and roughly similar size and in particular to correctly describe ion-specific effects, it is clear that accurate force fields are necessary. In the past, optimization strategies for ionic force fields either considered single-ion properties (such as the solvation free energy at infinite dilution or the ion-water structure) or ion-pair properties (in the form of ion-ion distribution functions). In this paper we investigate strategies to optimize ionic force fields based on single-ion and ion-pair properties simultaneously. To that end, we simulate five different salt solutions, namely CsCl, KCl, NaI, KF, and CsI, at finite ion concentration. The force fields of these ions are systematically varied under the constraint that the single-ion solvation free energy matches the experimental value, which reduces the two-dimensional $\\{\\sigma,\\e...

  19. An Updated Analytical Structural Pounding Force Model Based on Viscoelasticity of Materials

    Directory of Open Access Journals (Sweden)

    Qichao Xue

    2016-01-01

    Full Text Available Based on the summary of existing pounding force analytical models, an updated pounding force analysis method is proposed by introducing viscoelastic constitutive model and contact mechanics method. Traditional Kelvin viscoelastic pounding force model can be expanded to 3-parameter linear viscoelastic model by separating classic pounding model parameters into geometry parameters and viscoelastic material parameters. Two existing pounding examples, the poundings of steel-to-steel and concrete-to-concrete, are recalculated by utilizing the proposed method. Afterwards, the calculation results are compared with other pounding force models. The results show certain accuracy in proposed model. The relative normalized errors of steel-to-steel and concrete-to-concrete experiments are 19.8% and 12.5%, respectively. Furthermore, a steel-to-polymer pounding example is calculated, and the application of the proposed method in vibration control analysis for pounding tuned mass damper (TMD is simulated consequently. However, due to insufficient experiment details, the proposed model can only give a rough trend for both single pounding process and vibration control process. Regardless of the cheerful prospect, the study in this paper is only the first step of pounding force calculation. It still needs a more careful assessment of the model performance, especially in the presence of inelastic response.

  20. 2015 State Geodatabase for Georgia

    Data.gov (United States)

    US Census Bureau, Department of Commerce — The 2015 TIGER Geodatabases are extracts of selected nation based and state based geographic and cartographic information from the U.S. Census Bureau's Master...

  1. A force-based model to reproduce stop-and-go waves in pedestrian dynamics

    CERN Document Server

    Chraibi, Mohcine; Schadschneider, Andreas

    2015-01-01

    Stop-and-go waves in single-file movement are a phenomenon that is ob- served empirically in pedestrian dynamics. It manifests itself by the co-existence of two phases: moving and stopping pedestrians. We show analytically based on a simplified one-dimensional scenario that under some conditions the system can have instable homogeneous solutions. Hence, oscillations in the trajectories and in- stabilities emerge during simulations. To our knowledge there exists no force-based model which is collision- and oscillation-free and meanwhile can reproduce phase separation. We develop a new force-based model for pedestrian dynamics able to reproduce qualitatively the phenomenon of phase separation. We investigate analytically the stability condition of the model and define regimes of parameter values where phase separation can be observed. We show by means of simulations that the predefined conditions lead in fact to the expected behavior and validate our model with respect to empirical findings.

  2. Robust Operation of Tendon-Driven Robot Fingers Using Force and Position-Based Control Laws

    Science.gov (United States)

    Abdallah, Muhammad E (Inventor); Platt, Jr., Robert J. (Inventor); Reiland, Matthew J (Inventor); Hargrave, Brian (Inventor); Diftler, Myron A (Inventor); Strawser, Philip A (Inventor); Ihrke, Chris A. (Inventor)

    2013-01-01

    A robotic system includes a tendon-driven finger and a control system. The system controls the finger via a force-based control law when a tension sensor is available, and via a position-based control law when a sensor is not available. Multiple tendons may each have a corresponding sensor. The system selectively injects a compliance value into the position-based control law when only some sensors are available. A control system includes a host machine and a non-transitory computer-readable medium having a control process, which is executed by the host machine to control the finger via the force- or position-based control law. A method for controlling the finger includes determining the availability of a tension sensor(s), and selectively controlling the finger, using the control system, via the force or position-based control law. The position control law allows the control system to resist disturbances while nominally maintaining the initial state of internal tendon tensions.

  3. Rehabilitation of the Rocket Vehicle Integration Test Stand at Edwards Air Force Base

    Science.gov (United States)

    Jones, Daniel S.; Ray, Ronald J.; Phillips, Paul

    2005-01-01

    Since initial use in 1958 for the X-15 rocket-powered research airplane, the Rocket Engine Test Facility has proven essential for testing and servicing rocket-powered vehicles at Edwards Air Force Base. For almost two decades, several successful flight-test programs utilized the capability of this facility. The Department of Defense has recently demonstrated a renewed interest in propulsion technology development with the establishment of the National Aerospace Initiative. More recently, the National Aeronautics and Space Administration is undergoing a transformation to realign the organization, focusing on the Vision for Space Exploration. These initiatives provide a clear indication that a very capable ground-test stand at Edwards Air Force Base will be beneficial to support the testing of future access-to-space vehicles. To meet the demand of full integration testing of rocket-powered vehicles, the NASA Dryden Flight Research Center, the Air Force Flight Test Center, and the Air Force Research Laboratory have combined their resources in an effort to restore and upgrade the original X-15 Rocket Engine Test Facility to become the new Rocket Vehicle Integration Test Stand. This report describes the history of the X-15 Rocket Engine Test Facility, discusses the current status of the facility, and summarizes recent efforts to rehabilitate the facility to support potential access-to-space flight-test programs. A summary of the capabilities of the facility is presented and other important issues are discussed.

  4. Force transmissibility and vibration power flow behaviour of inerter-based vibration isolators

    Science.gov (United States)

    Yang, Jian

    2016-09-01

    This paper investigates the dynamics and performance of inerter-based vibration isolators. Force / displacement transmissibility and vibration power flow are obtained to evaluate the isolation performance. Both force and motion excitations are considered. It is demonstrated that the use of inerters can enhance vibration isolation performance by enlarging the frequency band of effective vibration isolation. It is found that adding inerters can introduce anti-resonances in the frequency-response curves and in the curves of the force and displacement transmissibility such that vibration transmission can be suppressed at interested excitation frequencies. It is found that the introduction of inerters enhances inertial coupling and thus have a large influence on the dynamic behaviour at high frequencies. It is shown that force and displacement transmissibility increases with the excitation frequency and tends to an asymptotic value as the excitation frequency increases. In the high-frequency range, it was shown that adding inerters can result in a lower level of input power. These findings provide a better understanding of the effects of introducing inerters to vibration isolation and demonstrate the performance benefits of inerter-based vibration isolators.

  5. Highly sensitive force sensor based on optical microfiber asymmetrical Fabry-Perot interferometer.

    Science.gov (United States)

    Gong, Yuan; Yu, Cai-Bin; Wang, Ting-Ting; Liu, Xiu-Ping; Wu, Yu; Rao, Yun-Jiang; Zhang, Ming-Lei; Wu, Hui-Juan; Chen, Xiao-Xiao; Peng, Gang-Ding

    2014-02-10

    An asymmetrical Fabry-Perot interferometric (AFPI) force sensor is fabricated based on a narrowband reflection of low-reflectivity fiber Bragg grating (LR-FBG) and a broadband Fresnel reflection of the cleaved fiber end. The AFPI sensor includes a section of microfiber made by tapering and it achieves a force sensitivity of 0.221 pm/μN with a tapered microfiber of 40 mm length and 6.1 μm waist diameter. Compared with similar AFPI structure in 125 μm-diameter single mode fiber, the force sensitivity of the microfiber AFPI structure is greatly enhanced due to its smaller diameter and can be optimized for different force scales by controlling the diameter. The fabrication process of the AFPI sensor is simple and cost-effective. The AFPI sensor has better multiplexing capacity than conventional extrinsic fiber-optic Fabry-Perot sensors, while it also release the requirement on the wavelength matching of the FBG-pair-based FPI.

  6. Polymer-based flexible capacitive sensor for three-axial force measurements

    Science.gov (United States)

    Dobrzynska, J. A.; Gijs, M. A. M.

    2013-01-01

    We have developed a flexible-substrate-based three-axial force sensor, composed of finger-shaped electrode capacitors, whose operation is based on the measurement of a capacitance change induced upon applying a three-axial load. The electrode design supports high sensitivity to shear forces. An overall flexibility of the sensor and elasticity of the capacitor's dielectric is obtained by integrating three polymers in the sensor's technology process, namely polyimide, parylene-C, and polydimethylsiloxane, combined with standard metallization processes. We have theoretically modeled the sensor's capacitance and its three-axial force sensitivity. The unit capacitors have static capacitances in the range of 20 pF. The electro-mechanical characterization of the capacitors reveals in the normal direction a sensitivity Sz = 0.024 kPa-1 for pressures <10 kPa, whereas for higher pressures the measured sensitivity Sz = 6.6 × 10-4 kPa-1. Typical measured shear force sensitivity Sx = 2.8 × 10-4 kPa-1. These values give our transducer high potential for use in skin-like sensing applications.

  7. Programmatic Environmental Assessment for Base General Plan Development, Schriever Air Force Base, Colorado

    Science.gov (United States)

    2012-06-01

    dividers in the parking lots. The tree composition is approximately 45 percent coniferous trees and 55 percent deciduous trees (USAF 2008). An Urban...roadway capacities would be significant if roads with no history of exceeding their designed capacity were forced to operate at or above those capacities

  8. Bio-ecological Peculiarities of Genus Pinus L. Species Under Conditions of Eastern Georgia

    Directory of Open Access Journals (Sweden)

    Tamar Nadiradze

    2014-06-01

    Full Text Available The article discusses bio-ecological peculiarities of the following species of genus Pinus L. spread in eastern Georgia: Pinus eldarica Medw., P. griffithii McCleland., P. cembra L., P. pallasiana Lamb., P. pinea L., P. sabiniana Dougl., P. sylvestris L., P. sosnowskyi Nakai, P. strobus L., the perspectives of their usage in Green Building and contemporary problems. We have studied the periods of bud opening, vegetation ending, starting and finishing of cambium action, sprout woodening process, time and rate of growing in height, and regularities of accumulation-transformation of storage carbohydrates. The studies revealed that the annual development cycle of all these species includes all morphological -physiological periods: sprout growth, latent growth, organic and forced rest. They are characterized by the good growth-development; almost all of them are perspective for eastern Georgia, particularly, for all regions of inner Kakheti. However, in recent years, massive drying up of pine forests groves takes place in eastern Georgia. That is why it is necessary to conduct the fitopatologic research, identify the pest causing the damage and plan the measures against it.

  9. Utilizing NASA Earth Observations to Monitor Sinkhole Development and Identify Risk Areas in Dougherty County, Georgia

    Science.gov (United States)

    Cahalan, M. D.; Berry, K.; Amin, M.; Xu, W.; Hu, T.; Milewski, A.

    2015-12-01

    Located in southwest Georgia, Dougherty County has a growing populace in an agricultural region that relies heavily on groundwater resources. Partly due to escalated groundwater extraction, this area has experienced an increase in sinkhole development over the last decade. Sinkholes pose a threat to infrastructure development, groundwater pollution, and land use operations. The NASA DEVELOP Georgia Disasters and Water Resources team partnered with the City of Albany and Dougherty County Planning and Development Services (PDS) and the Southwest Georgia Water Resources Task Force (SGWRTF) to assess past sinkhole development and identify areas susceptible to future sinkhole formation. Sinkhole mapping was completed utilizing a time-series of elevation data (1999 - 2011) from NASA's SRTM and ASTER missions, as well as European Remote-Sensing (ERS-1 and 2) satellite-derived elevation data. The sinkhole inventory maps and spatial statistical techniques (i.e., geographically-weighted regression) were employed to quantify the factors most influential in sinkhole development. With those results, the susceptibility of every area within Dougherty County to future sinkhole formation was identified. The results of this applied science project will enable the PDS and SGWRTF to make informed decisions on current and future land use, safe infrastructure development, and sustainable water resource management.

  10. Knowledge-Based Trajectory Error Pattern Method Applied to an Active Force Control Scheme

    Directory of Open Access Journals (Sweden)

    Endra Pitowarno, Musa Mailah, Hishamuddin Jamaluddin

    2012-08-01

    Full Text Available The active force control (AFC method is known as a robust control scheme that dramatically enhances the performance of a robot arm particularly in compensating the disturbance effects. The main task of the AFC method is to estimate the inertia matrix in the feedback loop to provide the correct (motor torque required to cancel out these disturbances. Several intelligent control schemes have already been introduced to enhance the estimation methods of acquiring the inertia matrix such as those using neural network, iterative learning and fuzzy logic. In this paper, we propose an alternative scheme called Knowledge-Based Trajectory Error Pattern Method (KBTEPM to suppress the trajectory track error of the AFC scheme. The knowledge is developed from the trajectory track error characteristic based on the previous experimental results of the crude approximation method. It produces a unique, new and desirable error pattern when a trajectory command is forced. An experimental study was performed using simulation work on the AFC scheme with KBTEPM applied to a two-planar manipulator in which a set of rule-based algorithm is derived. A number of previous AFC schemes are also reviewed as benchmark. The simulation results show that the AFC-KBTEPM scheme successfully reduces the trajectory track error significantly even in the presence of the introduced disturbances.Key Words:  Active force control, estimated inertia matrix, robot arm, trajectory error pattern, knowledge-based.

  11. Rocket propulsion experimental facilities at the Phillips Laboratory, Edwards Air Force Base, California

    Science.gov (United States)

    Beckmann, Joel W.; Kalliomaa, Wayne M.

    The Phillips Laboratory has extensive rocket propulsion faciliteis at Edwards Air Force Base, California. These facilities range form small scale cells capable of firing liquid rocket engines as small as 0.01 lbf (0.04 Newtons (N)) thrust up to very large liquid/solid test stands designed for firings up to 10 million lbf (44.5 million N) thrust. This paper gives a review of the variety and capabilities of the numerous facilities at Edwards Air Force Base, as well as an overview of current projects. Emphasis is placed on the general capabilities of these facilities; specifics are available upon request to the author. Trends in the evolution of rocket test facilities are discussed.

  12. Parallel Processing Based on Ship Maneuvering in Identification of Interaction Force Coefficients

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-jian; HUANG Guo-liang; DENG De-heng

    2008-01-01

    The parallel processing based on the free running model test was adopted to predict the interac-tion force coefficients (flow straightening coefficient and wake fraction) of ship maneuvering. And the multi-population genetic algorithm (MPGA) based on real coding that can contemporarily process the data of freerunning model and simulation of ship maneuvering was applied to solve the problem. Accordingly the optimalindividual was obtained using the method of genetic algorithm. The parallel processing of multi-populationsolved the prematurity in the identification for single population, meanwhile, the parallel processing of the dataof ship maneuvering (turning motion and zigzag motion) is an attempt to solve the coefficient drift problem.In order to validate the method, the interaction force coefficients were verified by the procedure and thesecoefficients measured were compared with those ones identified. The maximum error is less than 5%, and theidentification is an effective method.

  13. A large-stroke compliant joint–based force/displacement integrated sensor

    Directory of Open Access Journals (Sweden)

    Xuechao Duan

    2015-12-01

    Full Text Available The design methodology and validation of a compliant translational joint–based force/displacement integrated sensor is presented in this article. The stiffness analysis of the large displacement high precision compliant translational joint is developed, in which the screw theory–based symbolic formulation method for structures is employed. By combining the stiffness matrix of the single compliant beams and components in this joint, the entire stiffness matrix is derived. The stiffness matrix is validated by finite element analysis (FEA method. Finally, the compliant translational joint was fabricated with a three-dimensional printer and equipped with a linear position sensor and microcontroller. The displacement of the translational joint is measured and then the force is calculated using the stiffness matrix. A calibration is conducted so that the sub-Newton precision of the sensor is achieved.

  14. New enhancements and validation of force based posture and discomfort predictions.

    Science.gov (United States)

    Wirsching, Hans-Joachim; Engstler, Florian

    2012-01-01

    Many digital human models provide the crucial method to calculate postures in virtual environments. Traditionally these methods refer to experiments and make use of statistical modeling. They provide sufficient results in their specialized domain, but cannot be used in general applications. In addition they do not consider important design aspects as forces and discomfort. Hence a new force based approach has been introduced in order to overcome these shortcomings. Based on biomechanical models of active maximal and passive receding joint torques, a mechanical optimization generates static stable postures and related discomfort ratings. The results were promising, but showed some model deficiencies and were not validated in detail. The present paper continues this work and provides necessary model enhancements. Finally the new prediction models are validated on real experiments. The validation results are presented and discussed regarding to usability aspects and future development work.

  15. Analysis of Melting for Alkali Earth and Alkali Oxides Based on the Diffusional Force Theory

    Science.gov (United States)

    Liu, Quan; Chen, Li-Rong

    An analysis of the melting alkali earth and alkali oxides is presented using the concept of diffusional force. The calculations are performed by developing an ionic model based on Harrison's quantum mechanical treatment of overlap repulsive potential which takes into account the interactions up to second neighbors. Van der Waals dipole-dipole and dipole-quadrupole interactions calculated by more accurate methods are also included in the model. Using the formula by Fang, derived on the basis of thermodynamic analysis, the values of interionic distances for 8 alkali earth and alkali oxides at melting have been obtained. A simple model for melting is developed based on the diffusional force models. The values of Tm thus obtained are found to show fairly good agreement with experimental values of melting temperatures.

  16. Corruption Risks of Private Tutoring: Case of Georgia

    Science.gov (United States)

    Kobakhidze, Magda Nutsa

    2014-01-01

    The paper focuses on teacher-supplied private tutoring in the context of post-Soviet Georgia, and elucidates the ways in which teacher-supplied private tutoring can be related to educational corruption. The paper draws on data from in-depth interviews of 18 school teachers in different parts of Georgia in 2013. The findings of the qualitative…

  17. Corruption Risks of Private Tutoring: Case of Georgia

    Science.gov (United States)

    Kobakhidze, Magda Nutsa

    2014-01-01

    The paper focuses on teacher-supplied private tutoring in the context of post-Soviet Georgia, and elucidates the ways in which teacher-supplied private tutoring can be related to educational corruption. The paper draws on data from in-depth interviews of 18 school teachers in different parts of Georgia in 2013. The findings of the qualitative…

  18. Physical activity in Georgia state parks: A pilot study

    Science.gov (United States)

    Lincoln R. Larson; Jason W. Whiting; Gary T. Green

    2012-01-01

    This pilot study assessed the role of Georgia State Parks in the promotion of physical activity among different racial/ethnic and age groups. Data were collected at three state parks in north Georgia during the summer of 2009 using two research methods: behavior observations (N=2281) and intercept surveys (N=473).

  19. Integrating Engineering Design into Technology Education: Georgia's Perspective

    Science.gov (United States)

    Denson, Cameron D.; Kelley, Todd R.; Wicklein, Robert C.

    2009-01-01

    This descriptive research study reported on Georgia's secondary level (grades 6-12) technology education programs capability to incorporate engineering concepts and/or engineering design into their curriculum. Participants were middle school and high school teachers in the state of Georgia who currently teach technology education. Participants…

  20. Perceived Effectiveness of Clinical E-Learning for Georgia Midwives

    Science.gov (United States)

    Hunter, Adrienne

    2014-01-01

    In the state of Georgia, approximately nine out of every 1,000 babies die during birth and approximately 18.6 out of every 1,000 women die from a pregnancy-related cause (Georgia Department of Public Health, 2011). Continuing to build capacities for the continuing education of midwives--specifically Certified Nurse Midwives (CNMs)--can ensure they…

  1. 77 FR 64946 - Radio Broadcasting Services; Maysville, Georgia

    Science.gov (United States)

    2012-10-24

    ... COMMISSION 47 CFR Part 73 Radio Broadcasting Services; Maysville, Georgia AGENCY: Federal Communications... filed by Appalachian Broadcasting Company, Inc., proposing the allotment of Channel 265A at Maysville... Broadcasting Company, Post Office Drawer E, 233 Big A Road, Toccoa, Georgia 30577. FOR FURTHER...

  2. Novel knowledge-based mean force potential at the profile level

    Directory of Open Access Journals (Sweden)

    Wang Xiaolong

    2006-06-01

    Full Text Available Abstract Background The development and testing of functions for the modeling of protein energetics is an important part of current research aimed at understanding protein structure and function. Knowledge-based mean force potentials are derived from statistical analyses of interacting groups in experimentally determined protein structures. Current knowledge-based mean force potentials are developed at the atom or amino acid level. The evolutionary information contained in the profiles is not investigated. Based on these observations, a class of novel knowledge-based mean force potentials at the profile level has been presented, which uses the evolutionary information of profiles for developing more powerful statistical potentials. Results The frequency profiles are directly calculated from the multiple sequence alignments outputted by PSI-BLAST and converted into binary profiles with a probability threshold. As a result, the protein sequences are represented as sequences of binary profiles rather than sequences of amino acids. Similar to the knowledge-based potentials at the residue level, a class of novel potentials at the profile level is introduced. We develop four types of profile-level statistical potentials including distance-dependent, contact, Φ/Ψ dihedral angle and accessible surface statistical potentials. These potentials are first evaluated by the fold assessment between the correct and incorrect models generated by comparative modeling from our own and other groups. They are then used to recognize the native structures from well-constructed decoy sets. Experimental results show that all the knowledge-base mean force potentials at the profile level outperform those at the residue level. Significant improvements are obtained for the distance-dependent and accessible surface potentials (5–6%. The contact and Φ/Ψ dihedral angle potential only get a slight improvement (1–2%. Decoy set evaluation results show that the distance

  3. Landing of STS-58 Orbiter Columbia at Edwards Air Force Base

    Science.gov (United States)

    1993-01-01

    The Space Shuttle Columbia is about to touch down on the runway at Edwards Air Force Base in California. The landing occurred at 7:06 a.m., November 1, 1993 (126); The main landing gear of the Space Shuttle Columbia stirs up dust on the runway at Edwards AFB as it begins to touchdown (127); The nose gear of the Space Shuttle Columbia is about to touch down on the runway at Edwards AFB as Columbia completes its landing procedures (128).

  4. Quantitative Verification of a Force-based Model for Pedestrian Dynamics

    CERN Document Server

    Chraibi, Mohcine; Schadschneider, Andreas; Mackens, Wolfgang

    2009-01-01

    This paper introduces a spatially continuous force-based model for simulating pedestrian dynamics. The main intention of this work is the quantitative description of pedestrian movement through bottlenecks and in corridors. Measurements of flow and density at bottlenecks will be presented and compared with empirical data. Furthermore the fundamental diagram for the movement in a corridor is reproduced. The results of the proposed model show a good agreement with empirical data.

  5. EC-FORC: A New Cyclic Voltammetry Based Method for Examining Phase Transitions and Predicting Equilibrium

    OpenAIRE

    2007-01-01

    We propose a new, cyclic-voltammetry based experimental technique that can not only differentiate between discontinuous and continuous phase transitions in an adsorbate layer, but also quite accurately recover equilibrium behavior from dynamic analysis of systems with a continuous phase transition. The Electrochemical first-order reversal curve (EC-FORC) diagram for a discontinuous phase transition (nucleation and growth), such as occurs in underpotential deposition, is characterized by a neg...

  6. Geothermal exploration program, Hill Air Force Base, Davis and Weber Counties, Utah

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, W.E.; Chapman, D.S.; Foley, D.; Capuano, R.M.; Cole, D.; Sibbett, B.; Ward, S.H.

    1980-03-01

    Results obtained from a program designed to locate a low- or moderate-temperature geothermal resource that might exist beneath Hill Air Force Base (AFB), Ogden, Utah are discussed. A phased exploration program was conducted at Hill AFB. Published geological, geochemical, and geophysical reports on the area were examined, regional exploration was conducted, and two thermal gradient holes were drilled. This program demonstrated that thermal waters are not present in the shallow subsurface at this site. (MHR)

  7. Environmental Assessment Building 5745, Historical Building Demolition, Barksdale Air Force Base, Louisiana

    Science.gov (United States)

    2012-12-01

    wetlands occur, and the pine-oak-hickory- maple forest , which dominates the uplands. Seven plants listed on the state rare list and ten uncommon...parks/picnic areas, FamCamp, pools, golf course Open Space 16,450 75.0 Conservation areas, forest , safety clearance/security areas, utility...easements Water 2,317 11.0 Ponds, lakes, streams, forest wetlands Total 21,802 100 BAFB Total Area Source: Barksdale Air Force Base General Plan

  8. Optimization of Rolling Force Distribution Based on Niche Genetic Algorithm in Continuous Hot Rolling Mills

    Institute of Scientific and Technical Information of China (English)

    LIU Zi-ping; LI Li-xin

    2013-01-01

    Based on the niche genetic algorithm, the intelligent and optimizing model for the rolling force distribution in hot strip mills was put forward. The research showed that the model had many advantages such as fast searching speed, high calculating pre-cision and suiting for on-line calculation. A good strip shape could be achieved by using the model and it is appropriate and practica-ble for rolling producing.

  9. Final Environmental Assessment for the California Space Center at Vandenberg Air Force Base, California

    Science.gov (United States)

    2010-06-02

    Cultural Resources Inventory, Vandenberg Air Force Base, Santa Barbara County, California Hodges et al. (2000) 2000-04 Archaeological Survey of the...VAFB Nick Pelster, Technical Director, California Space Authority Roger Root, U.S. Fish and Wildlife Service, Ventura Field Office Chris Ryan...Heritage Program. California Department of Fish and Game, Sacramento. Hodges , C.M., C.G. Lebow, and R.L. McKim. 2000. Archaeological Survey of the

  10. Environmental Assessment for the California Space Center at Vandenberg Air Force Base, California

    Science.gov (United States)

    2010-04-08

    Cultural Resources Inventory, Vandenberg Air Force Base, Santa Barbara County, California Hodges et al. (2000) 2000-04 Archaeological Survey of the...Review Laura Ornelaz, Attorney Advisor, 30 SW/JA, VAFB Nick Pelster, Technical Director, California Space Authority Roger Root, U.S. Fish and Wildlife...the terrestrial natural communities of California. Nongame Heritage Program. California Department of Fish and Game, Sacramento. Hodges , C.M., C.G

  11. The scaled-charge additive force field for amino acid based ionic liquids

    DEFF Research Database (Denmark)

    Fileti, E. E.; Chaban, V. V.

    2014-01-01

    Ionic liquids (ILs) constitute an emerging research field. New ILs involve more and more organic and inorganic ions. Amino acid based ILs (AAILs) represent a specific interest due to their evolutional connection to proteins. We report a new non-polarizable force field (FF) for the eight AAILs com...... the CHARMM36 FF with minor modifications. Compatibility between our parameters and CHARMM36 parameters is preserved. (C) 2014 Elsevier B.V. All rights reserved....

  12. Environmental Assessment for the Solar Photovoltaic Array, Eglin Air Force Base, Florida

    Science.gov (United States)

    2014-01-24

    systems. ● Sequence construction activities to limit the soil exposure for long periods of time. 5 Water Resources ● Do not alter natural flow...construction activities to limit the soil exposure for long periods of time. Management Practices Management Actions January 2014 Solar Photovoltaic Array...ENVIRONMENTAL !ASSESSMENT FOR THE SOLAR PHOTOVOLTAIC ARRAY AT EGLIN AIR FORCE BASE- OKALOOSA COUNTY, FLORIDA. I USAF - DEA, SOLAR PHOTOVOL TAlC ARRAY AT EGLIN

  13. Environmental Assessment for Mill Creek Restoration Project, Eglin Air Force Base, FL

    Science.gov (United States)

    2007-02-28

    Persons Contacted Mr. Chris Metcalf , U.S. Fish and Wildlife Service Mr Bob Miller, 96 CEG/CEVSN, Endangered Species Biologist Mr Mike Nunley, 96 CEG...currents into the center of the channel, and preventing back eddy erosion. In addition, these structures provide excellent fish habitat, maintain...bank protection and limit any back eddy erosion. 05/06 Biological Assessment Page A-13 for Mill Creek Restoration Project Eglin Air Force Base

  14. Exploration and Resource Assessment at Mountain Home Air Force Base, Idaho Using an Integrated Team Approach

    Energy Technology Data Exchange (ETDEWEB)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2012-10-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home AFB.

  15. Analysis of a Lorentz force based vibration exciter using permanent magnets mounted on a piezoelectric stack

    Indian Academy of Sciences (India)

    Arghya Nandi; Sumanta Neogy; Sankha Bhaduri

    2011-02-01

    This work presents performance analysis of a Lorentz force based noncontact vibration exciter by mounting a couple of permanent magnets on a piezoelectric stack. A conductor is attached to the structure to be excited and is placed midway between unlike poles of a couple of permanent magnets. The permanent magnets are placed on a piezoelectric stack. This stack, because of its nano-positioning capabilities, can impart an accurate and adjustable harmonic vibratory motion to the couple of permanent magnets. The piezoelectric stack, because of its high stiffness remains uncoupled with the dynamics of the structure. Due to the relative motion between the magnets and the conductor, Lorentz force is generated within the conductor. This Lorentz force is responsible for vibration of the structure in a plane parallel to the pole faces of the magnets. This keeps the magnetic field almost independent of the vibration of the structure and the chance of the structure hitting the magnet during large vibration is totally eliminated. If the amplitude of displacement of the stack is kept constant, the non-contact excitation force in this exciter remains proportional to the excitation frequency. Though use of this exciter eliminates mass (apart from that of the conductor attached to the structure) and stiffness coupling, a known damping term gets added to that of the excited structure.

  16. Development and precision position/force control of a new flexure-based microgripper

    Science.gov (United States)

    Yang, Yi-ling; Wei, Yan-ding; Lou, Jun-qiang; Xie, Feng-ran; Fu, Lei

    2016-01-01

    This paper presents the design, modeling and position/force control of a new piezo-driven microgripper with integrated position and force sensors. The structural design of the microgripper is based on double amplification mechanisms employing the bridge-type mechanism and the parallelogram mechanism. The microgripper can generate a large gripping range and pure translation of the gripping arm. Through the pseudorigid-body-model method, theoretical models are derived. By means of several finite-element analysis simulations, the optimal structural parameters for the microgripper are acquired and the theoretical models are analyzed and validated. Furthermore, to improve the performance of the microgripper, a new hybrid position/force control scheme employing a nonlinear fuzzy logic controller combined with an incremental proportional-integral controller is presented. The control scheme is capable of regulating the position and the gripping force of the microgripper simultaneously. Experimental investigation and validation were performed and the experimental results verify the effectiveness of the developed structural design and the proposed hybrid control scheme.

  17. Novel Door-opening Method for Six-legged Robots Based on Only Force Sensing

    Science.gov (United States)

    Chen, Zhi-Jun; Gao, Feng; Pan, Yang

    2017-09-01

    Current door-opening methods are mainly developed on tracked, wheeled and biped robots by applying multi-DOF manipulators and vision systems. However, door-opening methods for six-legged robots are seldom studied, especially using 0-DOF tools to operate and only force sensing to detect. A novel door-opening method for six-legged robots is developed and implemented to the six-parallel-legged robot. The kinematic model of the six-parallel-legged robot is established and the model of measuring the positional relationship between the robot and the door is proposed. The measurement model is completely based on only force sensing. The real-time trajectory planning method and the control strategy are designed. The trajectory planning method allows the maximum angle between the sagittal axis of the robot body and the normal line of the door plane to be 45º. A 0-DOF tool mounted to the robot body is applied to operate. By integrating with the body, the tool has 6 DOFs and enough workspace to operate. The loose grasp achieved by the tool helps release the inner force in the tool. Experiments are carried out to validate the method. The results show that the method is effective and robust in opening doors wider than 1 m. This paper proposes a novel door-opening method for six-legged robots, which notably uses a 0-DOF tool and only force sensing to detect and open the door.

  18. Spatiotemporal Modeling of Urban Growth Predictions Based on Driving Force Factors in Five Saudi Arabian Cities

    Directory of Open Access Journals (Sweden)

    Abdullah F. Alqurashi

    2016-08-01

    Full Text Available This paper investigates the effect of four driving forces, including elevation, slope, distance to drainage and distance to major roads, on urban expansion in five Saudi Arabian cities: Riyadh, Jeddah, Makkah, Al-Taif and Eastern Area. The prediction of urban probabilities in the selected cities based on the four driving forces is generated using a logistic regression model for two time periods of urban change in 1985 and 2014. The validation of the model was tested using two approaches. The first approach was a quantitative analysis by using the Relative Operating Characteristic (ROC method. The second approach was a qualitative analysis in which the probable urban growth maps based on urban changes in 1985 is used to test the performance of the model to predict the probable urban growth after 2014 by comparing the probable maps of 1985 and the actual urban growth of 2014. The results indicate that the prediction model of 2014 provides a reliable and consistent prediction based on the performance of 1985. The analysis of driving forces shows variable effects over time. Variables such as elevation, slope and road distance had significant effects on the selected cities. However, distance to major roads was the factor with the most impact to determine the urban form in all five cites in both 1985 and 2014.

  19. The simulation of the half-dry stroke based on the force feedback technology

    Science.gov (United States)

    Guo, Chao; Hou, Zeng-xuan; Zheng, Shuan-zhu; Yang, Guang-qing

    2017-02-01

    A novel stroke simulation method of the Half-dry style of Chinese calligraphy based on the force feedback technology is proposed for the virtual painting. Firstly, according to the deformation of the brush when the force is exerted on it, the brush footprint between the brush and paper is calculated. The complete brush stroke is obtained by superimposing brush footprints along the painting direction, and the dynamic painting of the brush stroke is implemented. Then, we establish the half-dry texture databases and propose the concept of half-dry value by researching the main factors that affect the effects of the half-dry stroke. In the virtual painting, the half-dry texture is mapped into the stroke in real time according to the half-dry value and painting technique. A technique of texture blending based on the KM model is applied to avoid the seams while texture mapping. The proposed method has been successfully applied to the virtual painting system based on the force feedback technology. In this system, users can implement the painting in real time with a Phantom Desktop haptic device, which can effectively enhance reality to users.

  20. Integral force feedback control with input shaping: Application to piezo-based scanning systems in ECDLs

    Science.gov (United States)

    Zhang, Meng; Liu, Zhigang; Zhu, Yu; Bu, Mingfan; Hong, Jun

    2017-07-01

    In this paper, a hybrid control system is developed by integrating the closed-loop force feedback and input shaping method to overcome the problem of the hysteresis and dynamic behavior in piezo-based scanning systems and increase the scanning speed of tunable external cavity diode lasers. The flexible hinge and piezoelectric actuators are analyzed, and a dynamic model of the scanning systems is established. A force sensor and an integral controller are utilized in integral force feedback (IFF) to directly augment the damping of the piezoelectric scanning systems. Hysteresis has been effectively eliminated, but the mechanical resonance is still evident. Noticeable residual vibration occurred after the inflection points and then gradually disappeared. For the further control of mechanical resonance, based on the theory of minimum-acceleration trajectory planning, the time-domain input shaping method was developed. The turning sections of a scanning trajectory are replaced by smooth curves, while the linear sections are retained. The IFF method is combined with the input shaping method to control the non-linearity and mechanical resonance in high-speed piezo-based scanning systems. Experiments are conducted, and the results demonstrate the effectiveness of the proposed control approach.

  1. Health Reforms and Public Health in Georgia

    Directory of Open Access Journals (Sweden)

    Raminashvili, D.

    2012-07-01

    Full Text Available BACKGROUND: Starting from 90‘th, the Government of Georgia (GoG made several attempts to transform Georgian health care system into one with improved efficiency, accessibility, and quality services. Mandatory social health insurance which was introduced in the 1990s was abolished and private health insurance has been promoted as its replacement. The main principle of health care reform since 2006 was the transition towards complete marketization of the health care sector: private provision, private purchasing, liberal regulation, and minimum supervision.This paper aims to analyze an impact of ongoing reforms on public health and population health status.MATERIALS AND METHODS: A systematic review of the available literature was conducted through national and international organization reports; key informant interviews were conducted with major stakeholders. RESULTS: The country has attained critical achievements in relation to improved maternal and child health, national responses to HIV, TB and Malaria. Life expectancy has increased from 70.3 years in 1995 to 75.1 years in 2010. Under-5 mortality indicator has improved from 45.3 to 16.4 per 1000 live birth in 2005-2010 meaning a 64% decrease. However, Georgia is still facing a number of critical challenges securing better health for the population. Cardiovascular diseases are by far the largest cause of mortality, respiratory diseases are the leading cause of morbidity and have doubled during last decade. Georgia has one of the highest rates of male smoking in the world (over 50%.CONCLUSION: Governmental efforts in health promotion and disease prevention can have significant impact on health status by preventing chronic diseases and detecting health problems at a treatable stage. Government should consider increasing funding for public health and prevention programmes with the focus on prevention of the main risk factors affecting the population’s health: tobacco and drug use and unsafe

  2. The Crusades and the Kingdom of Georgia

    Directory of Open Access Journals (Sweden)

    Roin Metreveli

    2016-12-01

    Full Text Available The Crusades had a significant impact upon the fate of the Georgian state. The Georgian royal court used the Europeans’ undertakings to its own advantage. The Georgian king David IV the Builder (ruled from 1089 to 1125 was well-aware of objectives pursued by the Crusade wars. The ruler’s clever approach to laying out the nation’s policy, predicated upon the relevant characteristics of the then-existing international situation, resulted in the Crusades overpowering the might of the Seljuq Turks, which successfully facilitated the stepping-up of efforts to wage a war of liberation on the part of the Georgians. In the East, David IV the Builder was viewed as a protector of Christianity. He, concurrently, was seen as a ruler with a tolerant policy toward Moslems and firm ties with the Moslem world, which was due to a special state of affairs inside and outside Georgia. Thus, the link between the Kingdom of Georgia and the Crusades hinged on certain political circumstances. Among the rulers known to have had dealings with the Crusaders are George III (1156–1187, Tamar the Great (1181–1213, George IV Lasha (1213–1222, Rusudan (1223–1245, and some others. Some of the original sources, like letters from foreign kings, mention with great regard the name of George V the Brilliant (1314–1346, considered a eulogist of Jerusalem’s holy places and a mainstay of Christianity. His activities did not have a direct linkage with the Crusades but, nonetheless, were a continuation of the struggle of their ideology. The solicitude of the Kingdom of Georgia toward Christianity would, eventually, pay off by helping boost its prestige and ensure its high standing internationally.

  3. Necessity of electromagnetic emission network arrangement in Georgia

    Science.gov (United States)

    Turazashvili, Ioseb; Kachakhidze, Nino; Machavariani, Kakhaber; Kachakhidze, Manana; Gogoberidze, Vitali; Khazaradze, Giorgi

    2015-04-01

    The field of the tectonic stress has the hierarchical structure. The most characteristic features connected with the regional tectonic elements are determined by the geologic - tectonic data. It is established that in the young folded areas like the Caucasus the field of tectonic stress is characterized by the sharp anisotropy with the predominance of the compression perpendicular to the trend of folding. Spatial location of the main positive and negative geotectonic morphostructures of the Caucasus shows the existence of the wavy tectonic movements in the region. They are caused by the horizontal compression, provoked evidently by advancement of the Arabian lithosphere plate to the North and its re-approach with the Euro-Asian plate. All these cause considerable deformation of the lithosphere of the Caucasian region and its breaking up in separate blocks. This, in its turn, causes the concentration of stress along the boundaries of the blocks and rising of earthquakes focuses there. According to the instrumental data starting from 1899 at about 40 large earthquakes were fixed in the Caucasus. The rate of risks associated with these hazards increases every year in Georgia due to the appearance of new complicated technological construction: oil and gas pipelines large dams and hydropower plants and others. Modern ground-based and satellite methods of viewing enables to reveal those multiple anomalous geophysical phenomena which become evident in the period preceding earthquake and are directly connected with the process of its preparation. Lately special attention is attributed to the electromagnetic emission fixed during large earthquake and has already been successfully detected in Japan, America and Europe. Unfortunately there is no electromagnetic emission detection network in Georgia yet. The presented abstract concerns arrange of EM emission net and begin implementation of this vital task by arrangement of the one relevant station on the fault near Tbilisi

  4. Astronomical Beliefs in Medieval Georgia: Innovative Approaches

    Science.gov (United States)

    Sauter, Jefferson; Orchiston, W.; Stephenson, F.

    2014-01-01

    Written sources from medieval Georgia show, among other things, how astronomical ideas were adapted on the periphery of the Byzantine and Islamic worlds. In this paper, we investigate a number of Georgian beliefs about the heavens from a calendrical work and a celestial prognostication text, but also from less expected sources including the medieval life of a saint and an epic poem. For the most part, these sources were derived from Byzantine or Persian models. We show the extent to which the sources nevertheless conform to a specifically Georgian view of the cosmos. We argue that, in so doing, medieval Georgian authors employed several innovative approaches hitherto unnoticed by modern scholars.

  5. Force decomposition in robot force control

    Science.gov (United States)

    Murphy, Steve H.; Wen, John T.

    1991-01-01

    The unit inconsistency in force decomposition has motivated an investigation into the force control problem in multiple-arm manipulation. Based on physical considerations, it is argued that the force that should be controlled is the internal force at the specified frame in the payload. This force contains contributions due to both applied forces from the arms and the inertial force from the payload and the arms. A least-squares scheme free of unit inconsistency for finding this internal force is presented. The force control issue is analyzed, and an integral force feedback controller is proposed.

  6. (Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

  7. Building a multi-walled carbon nanotube-based mass sensor with the atomic force microscope

    DEFF Research Database (Denmark)

    Mateiu, Ramona Valentina; Kuhle, A.; Marie, Rodolphe Charly Willy;

    2005-01-01

    We report an approach for building a mass sensor based on multi-walled carbon nanotubes (MWCNT). We propose a method with a great potential for the positioning of MWCNTs based on self-assembly onto patterned hydrophilic areas. For the experiments ultra flat mica substrates covered with gold...... are used. The gold substrate is first covered with hydrophobic thiol molecules: octadecanthiol. The octadecanthiol molecules are then selectively removed from small areas by nanoshaving the gold substrate with the tip of an atomic force microscope (AFM) operating in contact mode. Hydrophilic thiols (2...

  8. Simulation of bidirectional pedestrian flow in transfer station corridor based on multi forces

    Institute of Scientific and Technical Information of China (English)

    周雪梅; 纪翔峰; 黄凰; 杨晓光

    2014-01-01

    A good understanding of pedestrian movement in the transfer corridor is vital for the planning and design of the station, especially for efficiency and safety.A multi-force vector grid model was presented to simulate the movement of bidirectional pedestrian flow based on cellular automata and forces between pedestrians. The model improves rule-based characteristics of cellular automata, details forces between pedestrians and solves pedestrian collisions by a several-step updating method to simulate pedestrian movements. Two general scenarios in corridor were simulated. One is bidirectional pedestrian flow simulation with isolation facility, and the other is bidirectional pedestrian flow simulation without isolation facility, where there exists disturbance in the middle. Through simulation, some facts can be seen that pedestrians in the case with isolation facility have the largest speed and pedestrians in the case without isolation facility have the smallest speed; pedestrians in the case of unidirectional flow have the largest volume and pedestrians in the case of without isolation facility have the smallest volume.

  9. A low cost grip transducer based instrument to quantify fingertip touch force.

    Science.gov (United States)

    Boukhenous, Samir; Attari, Mokhtar

    2007-01-01

    In this paper, a transducer based instrument for fingertip touch force is developed. As a diagnostic tool, the system was coupled with an EMG analog signal processor, which is considered as the main basis of evaluation for motor function impairment. A software program is developed to analyze EMG signal during fingertips effort to obtain valid characteristic parameters with spectral analysis. These parameters are associated with a low cost grip transducer based on Hall Effect component developed for the improvement of fingertip movement during holding objects or training exercises. Thus, the changes on each sensor signal can be detected and monitored with the software interface. The output signal and the EMG analog processor are feeding a high resolution data acquisition system of National Instrument. Preliminary experimental tests have been carried out for the fingertip force grasping according to the Adductor Pollicis muscle (AdP) for controlling the adductive motion of the thumb. The experimental results show that the changes of dynamic fingertip force affect the muscle.

  10. [The motive force of evolution based on the principle of organismal adjustment evolution.].

    Science.gov (United States)

    Cao, Jia-Shu

    2010-08-01

    From the analysis of the existing problems of the prevalent theories of evolution, this paper discussed the motive force of evolution based on the knowledge of the principle of organismal adjustment evolution to get a new understanding of the evolution mechanism. In the guide of Schrodinger's theory - "life feeds on negative entropy", the author proposed that "negative entropy flow" actually includes material flow, energy flow and information flow, and the "negative entropy flow" is the motive force for living and development. By modifying my own theory of principle of organismal adjustment evolution (not adaptation evolution), a new theory of "regulation system of organismal adjustment evolution involved in DNA, RNA and protein interacting with environment" is proposed. According to the view that phylogenetic development is the "integral" of individual development, the difference of negative entropy flow between organisms and environment is considered to be a motive force for evolution, which is a new understanding of the mechanism of evolution. Based on such understanding, evolution is regarded as "a changing process that one subsystem passes all or part of its genetic information to the next generation in a larger system, and during the adaptation process produces some new elements, stops some old ones, and thereby lasts in the larger system". Some other controversial questions related to evolution are also discussed.

  11. Land subsidence and problems affecting land use at Edwards Air Force Base and vicinity, California, 1990

    Science.gov (United States)

    Blodgett, James C.; Williams, J. S.

    Land subsidence in Antelope Valley, which includes Edwards Air Force Base, was first reported in the 1950's; by 1967, about 200 square miles of Antelope Valley were affected by as much as 2 feet of subsidence. The purpose of the report is to present the results to date of recent studies done by the U.S. Geological Survey, in cooperation with the U.S. Department of the Air Force, to determine the cause and areal extent of land subsidence and surface deformation on Rogers Lakebed and vicinity, and the effects of surface deformation on runways used for aircraft landings at Edwards AFB in southern California. Because of the time-related effects of land subsidence, several years of data collection will be needed to establish subsidence trends and evaluate those factors causing land subsidence.

  12. Modeling of Drilling Forces Based on Twist Drill Point Angles Using Multigene Genetic Programming

    Directory of Open Access Journals (Sweden)

    Myong-Il Kim

    2016-01-01

    Full Text Available The mathematical model was developed for predicting the influence of the drill point angles on the cutting forces in drilling with the twist drills, which was used to optimize those angles for reducing drilling forces. The approach was based on multigene genetic programming, for the training data, the grinding tests of twist drill were firstly conducted for the different drill point angles in Biglide parallel machine, and then drilling tests were performed on carbon fiber reinforced plastics using the grinded drills. The effectiveness of the proposed approach was verified through comparing with published data. It was found that the proposed model agreed well with the experimental data and was useful for improving the performance of twist drill.

  13. Central-force decomposition of spline-based modified embedded atom method potential

    Science.gov (United States)

    Winczewski, S.; Dziedzic, J.; Rybicki, J.

    2016-10-01

    Central-force decompositions are fundamental to the calculation of stress fields in atomic systems by means of Hardy stress. We derive expressions for a central-force decomposition of the spline-based modified embedded atom method (s-MEAM) potential. The expressions are subsequently simplified to a form that can be readily used in molecular-dynamics simulations, enabling the calculation of the spatial distribution of stress in systems treated with this novel class of empirical potentials. We briefly discuss the properties of the obtained decomposition and highlight further computational techniques that can be expected to benefit from the results of this work. To demonstrate the practicability of the derived expressions, we apply them to calculate stress fields due to an edge dislocation in bcc Mo, comparing their predictions to those of linear elasticity theory.

  14. An Atomic Force Microscopy based investigation of specific biomechanical properties for various types of neuronal cells

    Science.gov (United States)

    Spedden, Elise; White, James; Kaplan, David; Staii, Cristian

    2012-02-01

    Here we describe the use of Atomic Force Microscope (AFM) based techniques to characterize and explore the influence of biochemical and biomechanical cues on the growth and interaction of neuronal cells with surrounding guidance factors. Specifically, we use AFM topography and AFM force spectroscopy measurements to systematically investigate the morphology, elasticity, and real time growth of neuronal processes in the presence of different types of extracellular matrix proteins and growth factors. We therefore create a series of systems containing specified neuron densities where the type of the underlying growth promoting protein is different from sample to sample. For each system we measure key biomechanical parameters related to neuronal growth such as height and elastic modulus at multiple growth points on several types of neurons. We show that systematic measurements of these parameters yield fundamental information about the role played by substrate-plated guidance factors in determining elastic and morphological properties of neurons during growth.

  15. A Force-Based Grid Manipulator for ALE Calculations in a Lobe Pump

    Institute of Scientific and Technical Information of China (English)

    John Vande Voorde; Jan Vierendeels; Erik Dick

    2003-01-01

    In this paper, a time-dependant calculation of flow in a lobe pump is presented. Calculations are performed using the arbitrary Lagrangean Eulerean (ALE) method. A grid manipulator is needed to move the nodes between time steps. The used grid manipulator is based on the pseudo-force idea. This means that each node is fictitiously connected with its 8 neighbours via fictitious springs. The equilibrium of the resulting pseudo spring forces defines the altered position of the nodes. The grid manipulator was coupled with a commercial flow solver and the whole was tested on the flow through a three-lobe lobe pump. Results were obtained for a rotational speed of 460 rpm and incompressible silicon oil as fluid.

  16. Radar Scan Strategies for the Patrick Air Force Base Weather Surveillance Radar, Model-74C, Replacement

    Science.gov (United States)

    Short, David

    2008-01-01

    The 45th Weather Squadron (45 WS) is replacing the Weather Surveillance Radar, Model 74C (WSR-74C) at Patrick Air Force Base (PAFB), with a Doppler, dual polarization radar, the Radtec 43/250. A new scan strategy is needed for the Radtec 43/250, to provide high vertical resolution data over the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) launch pads, while taking advantage of the new radar's advanced capabilities for detecting severe weather phenomena associated with convection within the 45 WS area of responsibility. The Applied Meteorology Unit (AMU) developed several scan strategies customized for the operational needs of the 45 WS. The AMU also developed a plan for evaluating the scan strategies in the period prior to operational acceptance, currently scheduled for November 2008.

  17. Passive microrheology of soft materials with atomic force microscopy: A wavelet-based spectral analysis

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Torres, C.; Streppa, L. [CNRS, UMR5672, Laboratoire de Physique, Ecole Normale Supérieure de Lyon, 46 Allée d' Italie, Université de Lyon, 69007 Lyon (France); Arneodo, A.; Argoul, F. [CNRS, UMR5672, Laboratoire de Physique, Ecole Normale Supérieure de Lyon, 46 Allée d' Italie, Université de Lyon, 69007 Lyon (France); CNRS, UMR5798, Laboratoire Ondes et Matière d' Aquitaine, Université de Bordeaux, 351 Cours de la Libération, 33405 Talence (France); Argoul, P. [Université Paris-Est, Ecole des Ponts ParisTech, SDOA, MAST, IFSTTAR, 14-20 Bd Newton, Cité Descartes, 77420 Champs sur Marne (France)

    2016-01-18

    Compared to active microrheology where a known force or modulation is periodically imposed to a soft material, passive microrheology relies on the spectral analysis of the spontaneous motion of tracers inherent or external to the material. Passive microrheology studies of soft or living materials with atomic force microscopy (AFM) cantilever tips are rather rare because, in the spectral densities, the rheological response of the materials is hardly distinguishable from other sources of random or periodic perturbations. To circumvent this difficulty, we propose here a wavelet-based decomposition of AFM cantilever tip fluctuations and we show that when applying this multi-scale method to soft polymer layers and to living myoblasts, the structural damping exponents of these soft materials can be retrieved.

  18. Influences of nuclear containment radius on the aircraft impact force based on the Riera function

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Wu, H., E-mail: abrahamhao@126.com; Fang, Q.; Gong, Z.M.

    2015-11-15

    Highlights: • A fine aircraft model of A320 was built and verified by available limited prototype impacting tests. • The influences of aircraft longitudinal crushing strength on the impact process were analyzed. • The influences of NPP containment radius on the impact force were numerically studied. • The Riera function was modified by considering the radius effect of NPP containment. - Abstract: The aircraft impact force directly influences the local failure and global response of the nuclear power plant (NPP) containment, while the existing theoretical models and the field tests were almost based on the flat target. In order to analyze the radius effect of the circular sectional containment on the impact force, a fine FE model of the commercial aircraft A320 was established and validated by the available limited full-scale F-4 Phantom impact experiment. In order to determine the force to crush the A320 FE model, the influences of aircraft longitudinal crushing strength on the impact process were analyzed based on the Riera function. Considering the containment decaying effect to aircraft impact velocity, the impact impulse was theoretically calculated, while the influences of the losses of mass and energy were not included. The numerical simulations of A320 aircrafts impacting on simplified NPP containments with different radii were conducted, which could well reproduce the airframe crushing and debris scattering. By comparison of the simulated impact impulses and the calculation values by the Riera function, the coefficients corresponding to different containment radii are derived and a fitting formula is obtained. Finally, an improved Riera function dependent on the dimensionless ratio of nuclear containment radius and aircraft wingspan is proposed.

  19. Development of a novel liquid crystal based cell traction force transducer system.

    Science.gov (United States)

    Soon, C F; Youseffi, M; Berends, R F; Blagden, N; Denyer, M C T

    2013-01-15

    Keratinocyte traction forces play a crucial role in wound healing. The aim of this study was to develop a novel cell traction force (CTF) transducer system based on cholesteryl ester liquid crystals (LC). Keratinocytes cultured on LC induced linear and isolated deformation lines in the LC surface. As suggested by the fluorescence staining, the deformation lines appeared to correlate with the forces generated by the contraction of circumferential actin filaments which were transmitted to the LC surface via the focal adhesions. Due to the linear viscoelastic behavior of the LC, Hooke's equation was used to quantify the CTFs by associating Young's modulus of LC to the cell induced stresses and biaxial strain in forming the LC deformation. Young's modulus of the LC was profiled by using spherical indentation and determined at approximately 87.1±17.2kPa. A new technique involving cytochalasin-B treatment was used to disrupt the intracellular force generating actin fibers, and consequently the biaxial strain in the LC induced by the cells was determined. Due to the improved sensitivity and spatial resolution (∼1μm) of the LC based CTF transducer, a wide range of CTFs was determined (10-120nN). These were found to be linearly proportional to the length of the deformations. The linear relationship of CTF-deformations was then applied in a bespoke CTF mapping software to estimate CTFs and to map CTF fields. The generated CTF map highlighted distinct distributions and different magnitude of CTFs were revealed for polarized and non-polarized keratinocytes. Copyright © 2012 Elsevier B.V. All rights reserved.

  20. Primary headache disorders in the Republic of Georgia: prevalence and risk factors

    DEFF Research Database (Denmark)

    Katsarava, Z; Dzagnidze, A; Kukava, M;

    2009-01-01

    adult members (>/=16 years) of 500 adjacent households in Tbilisi, the capital city, and 300 in rural Kakheti in eastern Georgia, using a previously validated questionnaire based on International Headache Society diagnostic criteria. RESULTS: The target population included 1,145 respondents, 690 (60......OBJECTIVE: To estimate the 1-year prevalences of migraine and tension-type headache (TTH), and identify their principal risk factors, in the general population of the Republic of Georgia. METHODS: In a community-based door-to-door survey, 4 medical residents interviewed all biologically unrelated...... socioeconomic status were risk factors for migraine but not for TTH. Headache on >/=15 days/month was reported by 87 respondents, a prevalence of 7.6% (6.1-9.1). Female gender, low socioeconomic status, and frequent use (>/=10 days/month) of acute headache drugs were risk factors. The likely prevalence...

  1. Georgia tech catalog of gravitational waveforms

    Science.gov (United States)

    Jani, Karan; Healy, James; Clark, James A.; London, Lionel; Laguna, Pablo; Shoemaker, Deirdre

    2016-10-01

    This paper introduces a catalog of gravitational waveforms from the bank of simulations by the numerical relativity effort at Georgia Tech. Currently, the catalog consists of 452 distinct waveforms from more than 600 binary black hole simulations: 128 of the waveforms are from binaries with black hole spins aligned with the orbital angular momentum, and 324 are from precessing binary black hole systems. The waveforms from binaries with non-spinning black holes have mass-ratios q = m 1/m 2 ≤ 15, and those with precessing, spinning black holes have q ≤ 8. The waveforms expand a moderate number of orbits in the late inspiral, the burst during coalescence, and the ring-down of the final black hole. Examples of waveforms in the catalog matched against the widely used approximate models are presented. In addition, predictions of the mass and spin of the final black hole by phenomenological fits are tested against the results from the simulation bank. The role of the catalog in interpreting the GW150914 event and future massive binary black-hole search in LIGO is discussed. The Georgia Tech catalog is publicly available at einstein.gatech.edu/catalog.

  2. Importance of the Ecosystem Approach to Fisheries in Georgia

    Directory of Open Access Journals (Sweden)

    Rezo Goradze

    2014-03-01

    Full Text Available The economic downturn in the 1990s and early 2000s associated with the break-up of the Soviet Union had a negative impact on Georgian fisheries. Both marine and freshwater fisheries and aquaculture suffered considerable decline. The Georgian fishing fleet deteriorated. The role of state institutions in fisheries management weakened and funding of scientific research diminished. Economic and institutional problems had a negative effect on the state of aquatic bio-resources. The excessive and relentless use of living resources, use of illegal fishing gear and degradation of coastal ecosystems led to a considerable reduction in fish stocks, while the number of vulnerable and endangered species increased. Starting from the new millennium the attitude has changed. In 2004-2005 the 15-year plan for the development of the ecosystem approach to fisheries in Georgia was initiated with support from the FAO. A Georgian law on fisheries and aquaculture has been introduced. Discussions on responsible fisheries and an aquaculture code have also started, but are still pending. On the other hand, the fisheries department of the Ministry of Agriculture was abolished and the single fisheries research institute met a similar fate. Fisheries regulation came under the authority of the ministry of environment. There is still a lot to be done in order to establish an ecosystem approach to fisheries in Georgia. First of all, the legislative base must be addressed, including the Georgian law on fisheries, which would consider such issues as long-term sustainable development of fisheries, a responsible code of conduct for fishermen, monitoring and management structures at the national level, allocation of resources and application of scientific approaches in development of fisheries, aquaculture and mariculture.

  3. Interparticle force based methodology for prediction of cohesive powder flow properties

    Science.gov (United States)

    Esayanur, Madhavan Sujatha Sarma

    The transport and handling of powders are key areas in the process industry that have a direct impact on the efficiency and/or the quality of the finished product. A lack of fundamental understanding of powder flow properties as a function of operating variables such as relative humidity, and particle size, leading to problems such as arching, rat-holing and segregation, is one the main causes for unscheduled down times in plant operation and loss of billions of dollars in revenues. Most of the current design strategies and characterization techniques for industrial powders are based on a continuum approach similar to the field of soil mechanics. Due to an increase in complexity of the synthesis process and reduction in size of powders to the nanoscale, the surface properties and inter particle forces play a significant role in determining the flow characteristics. The use of ensemble techniques such as direct shear testing to characterize powders are no longer adequate due to lack of understanding of the changes in the property of powders as a function of the major operating variables such as relative humidity, temperature etc. New instrumentation or techniques need to be developed to reliably characterize powder flow behavior. Simultaneously, scalability of the current models to predict powder flow needs to be revisited. Specifically, this study focuses on the development of an inter particle force based model for predicting the unconfined yield strength of cohesive powders. To understand the role of interparticle forces in determining the strength of cohesive powders, the particle scale interactions were characterized using Atomic Force Microscopy (AFM), contact angle, surface tension, and coefficient of friction. The bulk scale properties such as unconfined yield strength, packing structure, and size of the shear zone were also investigated. It was determined that an interparticle force based model incorporating the effect of particle size and packing structure

  4. 2017 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, Stacy R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-02-01

    The 2017 Annual Terrestrial Sampling Plan for Sandia National Laboratories/New Mexico on Kirtland Air Force Base has been prepared in accordance with the “Letter of Agreement Between Department of Energy, National Nuclear Security Administration, Sandia Field Office (DOE/NNSA/SFO) and 377th Air Base Wing (ABW), Kirtland Air Force Base (KAFB) for Terrestrial Sampling” (signed January 2017), Sandia National Laboratories, New Mexico (SNL/NM). The Letter of Agreement requires submittal of an annual terrestrial sampling plan.

  5. Patrick Air Force Base integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Wahlstrom, R.R.; King, D.A.; Parker, S.A.; Sandusky, W.F.

    1993-08-01

    The US Air Force has tasked the Pacific Northwest Laboratory (PNL), in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to assess energy use at Patrick Air Force Base (AFB). The information obtained from this assessment will be used in identifying energy resource opportunities to reduce overall energy consumption on the base. The primary focus of this report is to assess the current baseline energy consumption at Patrick AFB. It is a comparison report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This assessment requires that information be obtained and characterized for buildings, utilities, energy sources, energy uses, and load profile information to be used to improve the characterization of energy use on the base. The characteristics of electricity, natural gas, and No. 2 fuel oil are analyzed for on-base facilities and housing. The assessment examines basic regional information used to determine energy-use intensity (EUI) values for Patrick AFB facilities by building, fuel type, and energy end use. It also provides a summary of electricity consumption from Florida Power and Light Company (FPL) metered data for 1985-1991. Load profile information obtained from FPL data is presented for the north and south substations for the four seasons of the year, including weekdays and weekends.

  6. Fall 1994 wildlife and vegetation survey, Norton Air Force Base, California

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-15

    The fall 1994 wildlife and vegetation surveys were completed October 3-7, 1994, at Norton Air Force Base (AFB), California. Two biologists from CDM Federal Programs, the U.S. Environmental Protection Agency (EPA) regional biologist and the Oak Ridge National Laboratory (ORNL) lead biologist conducted the surveys. A habitat assessment of three Installation Restoration Project (IRP) sites at Norton Air Force Base was also completed during the fall survey period. The IRP sites include: Landfill No. 2 (Site 2); the Industrial Wastewater Treatment Plant (IWTP) area; and Former Fire Training Area No. 1 (Site 5). The assessments were designed to qualitatively characterize the sites of concern, identify potential ecological receptors, and provide information for Remedial Design/Remedial Action activities. A Reference Area (Santa Ana River Wash) and the base urban areas were also characterized. The reference area assessment was performed to provide a baseline for comparison with the IRP site habitats. The fall 1994 survey is the second of up to four surveys that may be completed. In order to develop a complete understanding of all plant and animal species using the base, these surveys were planned to be conducted over four seasons. Species composition can vary widely during the course of a year in Southern California, and therefore, seasonal surveys will provide the most complete and reliable data to address changes in habitat structure and wildlife use of the site. Subsequent surveys will focus on seasonal wildlife observations and a spring vegetation survey.

  7. Groundwater level and nitrate concentration trends on Mountain Home Air Force Base, southwestern Idaho

    Science.gov (United States)

    Williams, Marshall L.

    2014-01-01

    Mountain Home Air Force Base in southwestern Idaho draws most of its drinking water from the regional aquifer. The base is located within the State of Idaho's Mountain Home Groundwater Management Area and is adjacent to the State's Cinder Cone Butte Critical Groundwater Area. Both areas were established by the Idaho Department of Water Resources in the early 1980s because of declining water levels in the regional aquifer. The base also is listed by the Idaho Department of Environmental Quality as a nitrate priority area. The U.S. Geological Survey, in cooperation with the U.S. Air Force, began monitoring wells on the base in 1985, and currently monitors 25 wells for water levels and 17 wells for water quality, primarily nutrients. This report provides a summary of water-level and nitrate concentration data collected primarily between 2001 and 2013 and examines trends in those data. A Regional Kendall Test was run to combine results from all wells to determine an overall regional trend in water level. Groundwater levels declined at an average rate of about 1.08 feet per year. Nitrate concentration trends show that 3 wells (18 percent) are increasing in nitrate concentration trend, 3 wells (18 percent) show a decreasing nitrate concentration trend, and 11 wells (64 percent) show no nitrate concentration trend. Six wells (35 percent) currently exceed the U.S. Environmental Protection Agency's maximum contaminant limit of 10 milligrams per liter for nitrate (nitrite plus nitrate, measured as nitrogen).

  8. The Development of a Scientific Evaluation System of Force-on-Force (FOF) Exercise for Performance-based Regulation in Nuclear Security

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Moonsung; Jung, Myungtak [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2015-05-15

    A terrorist attack or sabotage at a nuclear facility could lead result in a great amount of loss of life and social chaos, in addition to serious radiological damage. As threats have been evolved more intelligent, divergent, advanced, the international societies including IAEA encourage for all member states to establish the performance-based regulation using Forceon- Force (FOF) exercise, computer simulation. Consequently, the performance evaluation for physical protection at nuclear facilities should focus on properly reacting to threat scenarios. Physical protection should also include detecting, blocking, delaying, interrupting including the human and technical factors the adversary having malicious intention of the realistic main threat element before he accomplishes the goal based on Design Basis Threat (DBT). After the completion of the FOF evaluation system, KINAC will evaluate, and later strengthen its overall security program in response to changes in the threat environment, technological advancements, and lessons learned. As a result, substantial improvements to a nuclear facility security can be predicted. These improvements will focus on a plant security force, physical barriers, intrusion detection systems, surveillance systems, and access controls. Through the building a Force-on-Force scientific evaluation system, KINAC will establish an efficient physical protection implementation system for nuclear energy facilities.

  9. International trade in Georgia: Review of state programs, policies, and recent trends.

    OpenAIRE

    Moore, Robert E.

    2000-01-01

    This report surveys the major programs and formal policies of the state of Georgia that may affect or influence international trade, particularly exports from the state. This is of interest because it is expected that exports will have a positive effect on the job base by increasing the quantity and quality of jobs in the state, and on the general business climate by leading to a more diverse and extensive business environment. The report also presents recent trends in international trade in ...

  10. Potentiometric surfaces of the Arnold Engineering Development Complex Area, Arnold Air Force Base, Tennessee, May and September 2011

    Science.gov (United States)

    Haugh, Connor J.; Robinson, John A.

    2016-01-29

    Arnold Air Force Base occupies about 40,000 acres in Coffee and Franklin Counties, Tennessee. The primary mission of Arnold Air Force Base is to provide risk-reduction information in the development of aerospace products through test and evaluation. This mission is achieved in part through test facilities at Arnold Engineering Development Complex (AEDC), which occupies about 4,000 acres in the center of Arnold Air Force Base. Arnold Air Force Base is underlain by gravel and limestone aquifers, the most productive of which is the Manchester aquifer. Several volatile organic compounds, primarily chlorinated solvents, have been identified in the groundwater at Arnold Air Force Base. In 2011, the U.S. Geological Survey, in cooperation with the U.S. Air Force, Arnold Air Force Base, completed a study of groundwater flow focused on the Arnold Engineering Development Complex area. The Arnold Engineering Development Complex area is of particular concern because within this area (1) chlorinated solvents have been identified in the groundwater, (2) the aquifers are dewatered around below-grade test facilities, and (3) there is a regional groundwater divide.

  11. Rehabilitation for hemiplegia using an upper limb training system based on a force direction.

    Science.gov (United States)

    Ogata, Kunihiro; Hirabayashi, Yuto; Kubota, Keisuke; Hasegawa, Yuri; Tsuji, Toshiaki

    2017-07-01

    Hemiplegia patients have complete paralysis of half their body, and encounter many challenges in living an independent life. Rehabilitation of the lower body is more important than that of the upper body for independent living; thus, recovering upper body functions of their paralyzed side is not enough. Rehabilitation robots may be used to assist training without therapists. In this study, a small portable rehabilitation robot was developed for use at home, and a new training method was proposed. This robot consists on an omni wheel mechanism and a force sensor, and is capable of deciding the motion based on the force value. Voluntary movement of a hemiplegia patient is recovered by the rehabilitation robot and proposed training method. Thus, verification experiments were performed using participants with hemiplegia. The CCI (Co-Contraction Index) from after training were smaller than ones of before training, thus the movement skills of the participants improved with respect to controlling force direction and magnitude. Moreover, manual function test (MFT) scores increased as reflected by improvements in the motor function of the upper limb using the proposed training method.

  12. Polarizable empirical force field for acyclic polyalcohols based on the classical Drude oscillator.

    Science.gov (United States)

    He, Xibing; Lopes, Pedro E M; Mackerell, Alexander D

    2013-10-01

    A polarizable empirical force field for acyclic polyalcohols based on the classical Drude oscillator is presented. The model is optimized with an emphasis on the transferability of the developed parameters among molecules of different sizes in this series and on the condensed-phase properties validated against experimental data. The importance of the explicit treatment of electronic polarizability in empirical force fields is demonstrated in the cases of this series of molecules with vicinal hydroxyl groups that can form cooperative intra- and intermolecular hydrogen bonds. Compared to the CHARMM additive force field, improved treatment of the electrostatic interactions avoids overestimation of the gas-phase dipole moments resulting in significant improvement in the treatment of the conformational energies and leads to the correct balance of intra- and intermolecular hydrogen bonding of glycerol as evidenced by calculated heat of vaporization being in excellent agreement with experiment. Computed condensed phase data, including crystal lattice parameters and volumes and densities of aqueous solutions are in better agreement with experimental data as compared to the corresponding additive model. Such improvements are anticipated to significantly improve the treatment of polymers in general, including biological macromolecules.

  13. A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement

    Directory of Open Access Journals (Sweden)

    Ming-Yuan Cheng

    2010-11-01

    Full Text Available In this work, we present the development of a polymer-based capacitive sensing array. The proposed device is capable of measuring normal and shear forces, and can be easily realized by using micromachining techniques and flexible printed circuit board (FPCB technologies. The sensing array consists of a polydimethlysiloxane (PDMS structure and a FPCB. Each shear sensing element comprises four capacitive sensing cells arranged in a 2 × 2 array, and each capacitive sensing cell has two sensing electrodes and a common floating electrode. The sensing electrodes as well as the metal interconnect for signal scanning are implemented on the FPCB, while the floating electrodes are patterned on the PDMS structure. This design can effectively reduce the complexity of the capacitive structures, and thus makes the device highly manufacturable. The characteristics of the devices with different dimensions were measured and discussed. A scanning circuit was also designed and implemented. The measured maximum sensitivity is 1.67%/mN. The minimum resolvable force is 26 mN measured by the scanning circuit. The capacitance distributions induced by normal and shear forces were also successfully captured by the sensing array.

  14. Molecular recognition imaging using tuning fork-based transverse dynamic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Hofer, Manuel; Adamsmaier, Stefan [University of Linz, Institute for Biophysics, Altenbergerstr. 69, 4040 Linz (Austria); Zanten, Thomas S. van [IBEC-Institute for Bioengineering of Catalonia and CIBER-Bbn, Baldiri i Reixac 15-21, Barcelona 08028 (Spain); Chtcheglova, Lilia A. [University of Linz, Institute for Biophysics, Altenbergerstr. 69, 4040 Linz (Austria); Manzo, Carlo [IBEC-Institute for Bioengineering of Catalonia and CIBER-Bbn, Baldiri i Reixac 15-21, Barcelona 08028 (Spain); Duman, Memed [University of Linz, Institute for Biophysics, Altenbergerstr. 69, 4040 Linz (Austria); Mayer, Barbara [Christian Doppler Laboratory for Nanoscopic Methods in Biophysics, Institute for Biophysics, University of Linz, Altenbergerstr. 69, 4040 Linz (Austria); Ebner, Andreas [University of Linz, Institute for Biophysics, Altenbergerstr. 69, 4040 Linz (Austria); Christian Doppler Laboratory for Nanoscopic Methods in Biophysics, Institute for Biophysics, University of Linz, Altenbergerstr. 69, 4040 Linz (Austria); Moertelmaier, Manuel; Kada, Gerald [Agilent Technologies Austria GmbH, Aubrunnerweg 11, 4040 Linz (Austria); Garcia-Parajo, Maria F. [IBEC-Institute for Bioengineering of Catalonia and CIBER-Bbn, Baldiri i Reixac 15-21, Barcelona 08028 (Spain); ICREA-Institucio Catalana de Recerca i Estudis Avancats, 08010 Barcelona (Spain); Hinterdorfer, Peter, E-mail: peter.hinterdorfer@jku.at [University of Linz, Institute for Biophysics, Altenbergerstr. 69, 4040 Linz (Austria); Christian Doppler Laboratory for Nanoscopic Methods in Biophysics, Institute for Biophysics, University of Linz, Altenbergerstr. 69, 4040 Linz (Austria); Kienberger, Ferry [Agilent Technologies Austria GmbH, Aubrunnerweg 11, 4040 Linz (Austria)

    2010-05-15

    We demonstrate simultaneous transverse dynamic force microscopy and molecular recognition imaging using tuning forks as piezoelectric sensors. Tapered aluminum-coated glass fibers were chemically functionalized with biotin and anti-lysozyme molecules and attached to one of the prongs of a 32 kHz tuning fork. The lateral oscillation amplitude of the tuning fork was used as feedback signal for topographical imaging of avidin aggregates and lysozyme molecules on mica substrate. The phase difference between the excitation and detection signals of the tuning fork provided molecular recognition between avidin/biotin or lysozyme/anti-lysozyme. Aggregates of avidin and lysozyme molecules appeared as features with heights of 1-4 nm in the topographic images, consistent with single molecule atomic force microscopy imaging. Recognition events between avidin/biotin or lysozyme/anti-lysozyme were detected in the phase image at high signal-to-noise ratio with phase shifts of 1-2{sup o}. Because tapered glass fibers and shear-force microscopy based on tuning forks are commonly used for near-field scanning optical microscopy (NSOM), these results open the door to the exciting possibility of combining optical, topographic and biochemical recognition at the nanometer scale in a single measurement and in liquid conditions.

  15. Bis(terpyridine)-based surface template structures on graphite: a force field and DFT study.

    Science.gov (United States)

    Künzel, Daniela; Markert, Thomas; Gross, Axel; Benoit, David M

    2009-10-21

    Host-guest networks formed by ordered organic layers are promising candidates for applications in molecular storage and quantum computing. We have studied 2-dimensionally ordered surface template structures of bis(terpyridine)-derived molecules (BTPs) on graphite using force field and DFT methods and compared the results to recent experimental observations. In order to determine the force field best suited for surface calculations, bond lengths and angles, torsional potentials, adsorption and stacking energies of smaller aromatic molecules were calculated with different force fields (Compass, UFF, Dreiding and CVFF). Density functional perturbation theory calculations were used to study the intermolecular interactions between 3,3'-BTP molecules. Structural properties, adsorption energies and rotational barriers of the 3,3'-BTP surface structure and its host-guest systems with phthalocyanine (PcH(2)) or excess 3,3'-BTP as guest molecules have been addressed. In addition, STM images of oligopyridine and phthalocyanine molecules were simulated based on periodic and local density functional theory calculations.

  16. Magnetic Field Equivalent Current Analysis-Based Radial Force Control for Bearingless Permanent Magnet Synchronous Motors

    Directory of Open Access Journals (Sweden)

    Huangqiu Zhu

    2015-05-01

    Full Text Available Bearingless permanent magnet synchronous motors (BPMSMs, with all advantages of permanent magnet motors (PMSMs and magnetic bearings, have become an important research direction in the bearingless motor field. To realize a stable suspension for the BPMSM, accurate decoupling control between the electromagnetic torque and radial suspension force is indispensable. In this paper, a concise and reliable analysis method based on a magnetic field equivalent current is presented. By this analysis method, the operation principle is analyzed theoretically, and the necessary conditions to produce a stable radial suspension force are confirmed. In addition, mathematical models of the torque and radial suspension force are established which is verified by the finite element analysis (FEA software ANSYS. Finally, an experimental prototype of a 2-4 poles surface-mounted BPMSM is tested with the customized control strategy. The simulation and experimental results have shown that the motor has good rotation and suspension performance, and validated the accuracy of the proposed analysis method and the feasibility of the control strategy.

  17. [The organizational bases for the building of a modern medical support system for the Armed Forces].

    Science.gov (United States)

    Chizh, I M

    1996-01-01

    In the article the problems concerning characteristic features of the local wars and armed conflicts, organization bases of construction of The Army and Fleet medical support modern system are discussed. The organization of personnel medical security is considered depending on the duration, intensity and spatial scope of military conflict, peculiarities of group (forces) application and ways of military actions conduction. The distribution of federal troops sanitary losses during the war in Chechenskaya Republic is shown depending on the type, localization and degree of injuries gravity as well as volume of the wounded and invalids evacuation by air transport and work of military medical institutions. The following principles of construction of the Armed Forces medical support system are formulated: The system must be in compliance with troops goals, structure, strategy and tactics, its specificity; development of medical security forms and methods, their historicism; interdependency, completeness and integrity of the system's elements; territorial aspects of its construction and management optimization. Considering character of the goals being laid on the Mobile Forces the paramount importance is attached to the level of readiness of medical service and its formations and units to act in crisis situations.

  18. Force-Field Based Quasi-Chemical Method for Rapid Evaluation of Binary Phase Diagrams.

    Science.gov (United States)

    Sweere, Augustinus J M; Fraaije, Johannes G E M

    2015-11-05

    We present the Pair Configurations to Molecular Activity Coefficients (PAC-MAC) method. The method is based on the pair sampling technique of Blanco (Fan, C. F.; Olafson, B. D.; Blanco, M.; Hsu, S. L. Application of Molecular Simulation to Derive Phase Diagrams of Binary Mixtures. Macromolecules 1992, 25, 3667-3676) with an extension that takes the packing of the molecules into account by a free energy model. The intermolecular energy is calculated using classical force fields. PAC-MAC is able to predict activity coefficients and corresponding vapor-liquid equilibrium diagrams at least 4 orders of magnitude faster than molecular simulations. The accuracy of the PAC-MAC method is tested by comparing the results with experimental data and with the results of the COSMO-SAC model (Lin, S.-T.; Sandler, S. I. A Priori Phase Equilibrium Prediction from a Segment Contribution Solvation Model. Ind. Eng. Chem. Res. 2002, 41, 899-913). PAC-MAC (using the OPLS-aa force field) is shown to be comparable in accuracy to COSMO-SAC, at the considerable advantage that PAC-MAC in principle does not require quantum calculation, provided proper force fields to be available.

  19. The influence of physical and physiological cues on atomic force microscopy-based cell stiffness assessment.

    Directory of Open Access Journals (Sweden)

    Yu-Wei Chiou

    Full Text Available Atomic force microscopy provides a novel technique for differentiating the mechanical properties of various cell types. Cell elasticity is abundantly used to represent the structural strength of cells in different conditions. In this study, we are interested in whether physical or physiological cues affect cell elasticity in Atomic force microscopy (AFM-based assessments. The physical cues include the geometry of the AFM tips, the indenting force and the operating temperature of the AFM. All of these cues show a significant influence on the cell elasticity assessment. Sharp AFM tips create a two-fold increase in the value of the effective Young's modulus (E(eff relative to that of the blunt tips. Higher indenting force at the same loading rate generates higher estimated cell elasticity. Increasing the operation temperature of the AFM leads to decreases in the cell stiffness because the structure of actin filaments becomes disorganized. The physiological cues include the presence of fetal bovine serum or extracellular matrix-coated surfaces, the culture passage number, and the culture density. Both fetal bovine serum and the extracellular matrix are critical for cells to maintain the integrity of actin filaments and consequently exhibit higher elasticity. Unlike primary cells, mouse kidney progenitor cells can be passaged and maintain their morphology and elasticity for a very long period without a senescence phenotype. Finally, cell elasticity increases with increasing culture density only in MDCK epithelial cells. In summary, for researchers who use AFM to assess cell elasticity, our results provide basic and significant information about the suitable selection of physical and physiological cues.

  20. Building an open-source simulation platform of acoustic radiation force-based breast elastography.

    Science.gov (United States)

    Wang, Yu; Peng, Bo; Jiang, Jingfeng

    2017-03-07

    Ultrasound-based elastography including strain elastography, acoustic radiation force impulse (ARFI) imaging, point shear wave elastography and supersonic shear imaging (SSI) have been used to differentiate breast tumors among other clinical applications. The objective of this study is to extend a previously published virtual simulation platform built for ultrasound quasi-static breast elastography toward acoustic radiation force-based breast elastography. Consequently, the extended virtual breast elastography simulation platform can be used to validate image pixels with known underlying soft tissue properties (i.e. 'ground truth') in complex, heterogeneous media, enhancing confidence in elastographic image interpretations. The proposed virtual breast elastography system inherited four key components from the previously published virtual simulation platform: an ultrasound simulator (Field II), a mesh generator (Tetgen), a finite element solver (FEBio) and a visualization and data processing package (VTK). Using a simple message passing mechanism, functionalities have now been extended to acoustic radiation force-based elastography simulations. Examples involving three different numerical breast models with increasing complexity-one uniform model, one simple inclusion model and one virtual complex breast model derived from magnetic resonance imaging data, were used to demonstrate capabilities of this extended virtual platform. Overall, simulation results were compared with the published results. In the uniform model, the estimated shear wave speed (SWS) values were within 4% compared to the predetermined SWS values. In the simple inclusion and the complex breast models, SWS values of all hard inclusions in soft backgrounds were slightly underestimated, similar to what has been reported. The elastic contrast values and visual observation show that ARFI images have higher spatial resolution, while SSI images can provide higher inclusion-to-background contrast. In

  1. Building an open-source simulation platform of acoustic radiation force-based breast elastography

    Science.gov (United States)

    Wang, Yu; Peng, Bo; Jiang, Jingfeng

    2017-03-01

    Ultrasound-based elastography including strain elastography, acoustic radiation force impulse (ARFI) imaging, point shear wave elastography and supersonic shear imaging (SSI) have been used to differentiate breast tumors among other clinical applications. The objective of this study is to extend a previously published virtual simulation platform built for ultrasound quasi-static breast elastography toward acoustic radiation force-based breast elastography. Consequently, the extended virtual breast elastography simulation platform can be used to validate image pixels with known underlying soft tissue properties (i.e. ‘ground truth’) in complex, heterogeneous media, enhancing confidence in elastographic image interpretations. The proposed virtual breast elastography system inherited four key components from the previously published virtual simulation platform: an ultrasound simulator (Field II), a mesh generator (Tetgen), a finite element solver (FEBio) and a visualization and data processing package (VTK). Using a simple message passing mechanism, functionalities have now been extended to acoustic radiation force-based elastography simulations. Examples involving three different numerical breast models with increasing complexity—one uniform model, one simple inclusion model and one virtual complex breast model derived from magnetic resonance imaging data, were used to demonstrate capabilities of this extended virtual platform. Overall, simulation results were compared with the published results. In the uniform model, the estimated shear wave speed (SWS) values were within 4% compared to the predetermined SWS values. In the simple inclusion and the complex breast models, SWS values of all hard inclusions in soft backgrounds were slightly underestimated, similar to what has been reported. The elastic contrast values and visual observation show that ARFI images have higher spatial resolution, while SSI images can provide higher inclusion-to-background contrast

  2. COHUTTA WILDERNESS, GEORGIA AND TENNESSEE AND HEMP TOP ROADLESS AREA, GEORGIA.

    Science.gov (United States)

    Gair, Jacob E.; Gazdik, Gertrude C.

    1984-01-01

    A survey has found little or no promise for the occurrence of metallic mineral-resources in the Cohutta Wilderness and the adjacent Hemp Top Roadless Area. The Cohutta Wilderness is located mainly in northern Georgia and extends a small distance into southeastern Tennessee; the Hemp Top Roadless Area borders part of the Cohutta Wilderness on the east and extends southward from the Georgia-Tennessee line. The study area is underlain by slightly metamorphosed folded and faulted sedimentary rocks of late Precambrian age. Detailed sampling in the vicinity of the known gold-bearing and tin-bearing samples might outline small areas of low-grade mineralization. The sedimentary rocks which are buried many thousands of feet beneath the surface of the Cohutta area have an unknown potential for oil and gas - probably gas at the inferred depth of burial and temperatures implicit at such depth. This potential could only be verified by a program of deep drilling.

  3. Conference Report: 5th Annual Georgia Conference on Information Literacy

    Directory of Open Access Journals (Sweden)

    Rebecca Ziegler

    2009-11-01

    Full Text Available The 5th annual Georgia Conference on Information Literacy took place in Savannah, Georgia on October 3-4, 2008. Since its inception, this conference has drawn participants from across the United States and even a few from abroad. Jointly sponsored by the Zach S. Henderson Library, the Department of Writing and Linguistics, the College of Education, and the Center for Continuing Education at Georgia Southern University, the conference offers both theoretical and practical discussions of the complex issues involved in teaching students how to find, interpret and use information in emerging electronic technologies against the backdrop of one of America’s loveliest cities.

  4. Geology, hydrology, and water supply of Edwards Air Force Base, Kern County, California

    Science.gov (United States)

    Dutcher, Lee Carlton; Warts, G.F.

    1963-01-01

    Edwards Air Force Base occupies the northern part of Antelope Valley, California. As a result of large-scale and increasing agricultural pumping in the valley, the net draft has exceeded the perennial supply since about 1930 and was about 170,000 acre-feet in 1951--at least three times the estimated yield. As a result, there has been a continuing depletion of ground water stored in all the unconsolidated deposits, including the principal aquifers contained in the younger and older alluvium.

  5. Environmental Assessment: Construction of Consolidated Fuel Overhaul and Repair Facility at Tinker Air Force Base, Oklahoma

    Science.gov (United States)

    2007-10-01

    Historic Preservation Officer MH:bh Oklahoma Archeological Survey March 23, 2007 Trudi Logan Department of the Air Force 72 Air Base Wing (AFMC...Fox Larry Ci’l AETC CONS/LGCK; McKee John M Civ OC-ALC/FMA; King Thelma J Civ OC-ALC/FMC; Powell Paul A Civ 72 ABW/CECED; Powell Paul A Civ 72 ABW...L CIV OC-ALC/FMC Grimes Jim D Civ OC-ALC/FMC; Tomlinson Deborah L Civ OC-ALC/FMC; Fox Larry Civ AETC CONS/LGCK; McKee John M Civ OC-ALC/FMA; King

  6. Ground-based measurements of aerosol optical properties and radiative forcing in North China

    Institute of Scientific and Technical Information of China (English)

    Hongbin Chen; Xiangao Xia; Pucai Wang; Wenxing Zhang

    2007-01-01

    In order to gain an insight into the aerosol properties and their climatic effect over the continental source regions of China, it is of significance to carry out long-term ground-based measurements of aerosol optical properties and radiative forcing. A couple of temporary and permanent Aerosol Robotic Network (AERONET) sites and three comprehensive radiative sites were established in China as a result of international cooperation in recent years. Heavy aerosol loading and significant temporal and spatial variation over North China are revealed by the AERONET data.Aerosol-induced reductions in surface radiation budget are examined on the basis of collocated observations by sun photometers and pyranometers.

  7. Towards a unified realistic shell-model Hamiltonian with the monopole-based universal force

    CERN Document Server

    Kaneko, K; Sun, Y; Tazaki, S

    2013-01-01

    We propose a unified realistic shell-model Hamiltonian employing the pairing plus multipole Hamiltonian combined with the monopole interaction constructed starting from the monopole-based universal force by Otsuka it et al. (Phys. Rev. Lett. 104, 012501 (2010)). It is demonstrated that the proposed PMMU model can consistently describe a large amount of spectroscopic data as well as binding energies in the pf and pf5/2g9/2 shell spaces, and could serve as a practical shell model for even heavier mass regions.

  8. Modelling Inter-Particle Forces and Resulting Agglomerate Sizes in Cement-Based Materials

    DEFF Research Database (Denmark)

    Kjeldsen, Ane Mette; Geiker, Mette Rica

    2005-01-01

    The theory of inter-particle forces versus external shear in cement-based materials is reviewed. On this basis, calculations on maximum agglomerate size present after the combined action of superplasticizers and shear are carried out. Qualitative experimental results indicate that external shear...... affects the particle size distribution of Mg(OH)2 (used as model material) as well as silica, whereas the addition of superplasticizers affects only the smallest particles in cement and thus primarily acts as water reducers and not dispersers....

  9. Group 13, 1990 ASCAN Ellen Ochoa trains at Vance Air Force Base, Oklahoma

    Science.gov (United States)

    1990-01-01

    Group 13, 1990 Astronaut Candidate (ASCAN) Ellen Ochoa, wearing helmet and in full parachute equipment, waits while a training instructor adjusts her parachute harness prior to a parasail training exercise at Vance Air Force Base (AFB) in Enid, Oklahoma. When adjusted correctly, Ochoa will be pulled behind a moving vehicle to simulate a parachute jump from an airplane in an emergency situation. The parachute creates the backdrop for this photo. Ochoa, along with 22 other ASCANs, participated in this survival training course at Vance from 07-29-90 through 07-31-90.

  10. Group 13, 1990 ASCAN Ellen Ochoa parasails at Vance Air Force Base, Oklahoma

    Science.gov (United States)

    1990-01-01

    Group 13, 1990 Astronaut Candidate (ASCAN) Ellen Ochoa, wearing helmet and holding onto parachute harness, parasails during a survival training course exercise at Vance Air Force Base (AFB) in Enid, Oklahoma. In this phase of the course, the trainee, in full parachute equipment, is pulled behind a moving vehicle to simulate a parachute jump from an airplane in an emergency situation. Her parachute forms the backdrop for the photo. Ochoa, along with 22 other ASCANs, began a year's training and evaluation in July. This session was conducted from 07-29-90 through 07-31-90.

  11. Effect of tip shape on line edge roughness measurement based on atomic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Li Ning [Shanghai Second Polytechnic University, Shanghai 201209 (China); Wang Fei; Zhao Xuezeng [School of Mechanical and Electronic Engineering, Harbin Institute of Technology, Harbin 150001 (China)

    2010-12-15

    Atomic force microscopy (AFM) is an important tool in line edge roughness (LER) measurements, where accuracy for line edge identification is influenced by the shape of the tip. In this article, the effect of tip shape on LER measurement based on AFM is studied theoretically. The formulas for calculating the distance between the measured and actual line edge of the sample are presented. The effects of the three kinds of tips with different shapes are experimentally compared for validation. Suggestions on how to reduce measuring error caused by tip shape are also given.

  12. Socioeconomic Impact Analysis Study. Disposal and Reuse of Norton Air Force Base, California

    Science.gov (United States)

    1993-06-01

    The clinic at Norton offers outpatient-medical, I dental , and pharmaceutical services. On-base recreational facilities include a 2-8 Socioeconomic...units. 1990 dolor .. (d) Renter-occupied unite, 1990 dollars (by month). Sources: U.S. Bureau of the Census. 1982b, 1991. I increased markedly in all... dental outpatients in FY 1989, for an average of slightly more than 20,000 visits per month (U.S. Air Force, 1990b). The clinic’s staff conducted

  13. Atomic force microscopy based nanoindentation study of onion abaxial epidermis walls in aqueous environment

    Energy Technology Data Exchange (ETDEWEB)

    Xi, Xiaoning; Tittmann, Bernhard [Department of Engineering Science and Mechanics, Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Kim, Seong H. [Department of Chemical Engineering, Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2015-01-14

    An atomic force microscopy based nanoindentation method was employed to study how the structure of cellulose microfibril packing and matrix polymers affect elastic modulus of fully hydrated primary plant cell walls. The isolated, single-layered abaxial epidermis cell wall of an onion bulb was used as a test system since the cellulose microfibril packing in this cell wall is known to vary systematically from inside to outside scales and the most abundant matrix polymer, pectin, can easily be altered through simple chemical treatments such as ethylenediaminetetraacetic acid and calcium ions. Experimental results showed that the pectin network variation has significant impacts on the cell wall modulus, and not the cellulose microfibril packing.

  14. Measurement of Contractile Activity in Small Animal's Digestive Organ by Carbon Nanotube-Based Force Transducer

    Science.gov (United States)

    Hirata, Takamichi; Takeda, Naoki; Tsutsui, Chihiro; Koike, Kanako; Shimatani, Yuichi; Sakai, Takafumi; Akiya, Masahiro; Taguchi, Akira

    2011-03-01

    A carbon nanotube (CNT)-based force transducer designed to be embedded in the body of a live animal was fabricated and implanted into the stomach of a rat omit to measure contractile movement. The transducer comprised dispersed poly(ethylene glycol)-grafted multiwalled CNTs applied to a comb-like Au-electrode formed on a poly(dimethylsiloxane) sheet. The implanted rat was injected with acetylcholine to induce muscular contractions and changes in the resistance of the transducer were measured. Such changes arise owing to strain in the CNT network upon distortion. The measured resistance change was found to be proportional to the concentration of injected acetylcholine.

  15. Determination of Optimal Energy Efficient Separation Schemes based on Driving Forces

    DEFF Research Database (Denmark)

    Bek-Pedersen, Erik; Gani, Rafiqul; Levaux, O.

    2000-01-01

    A new integrated approach for synthesis, design and operation of separation schemes is presented. This integrated approach is based on driving forces that promote the desired separation for different separation techniques. A set of algorithms needed by the integrated approach for sequencing...... and design of distillation columns and for generating hybrid separation schemes are presented. The main feature of these algorithms is that they provide a 'visual' solution that also appears to be near optimal in terms of energy consumption. Several illustrative examples highlighting the application...

  16. Automated Solid-Phase Subcloning Based on Beads Brought into Proximity by Magnetic Force

    DEFF Research Database (Denmark)

    Hudson, Elton P.; Nikoshkov, Andrej; Uhlén, Mathias;

    2012-01-01

    and the gene are immobilized to separate paramagnetic beads and brought into proximity by magnetic force. Ligation events were directly evaluated using fluorescent-based microscopy and flow cytometry. The highest ligation efficiencies were obtained when gene- and vector-coated beads were brought into close...... contact by application of a magnet during the ligation step. An automated procedure was developed using a laboratory workstation to transfer genes into various expression vectors and more than 95% correct clones were obtained in a number of various applications. The method presented here is suitable...

  17. Operable Unit 1 remedial investigation report, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Gilmore, T.J.; Fruland, R.M.; Liikala, T.L. [and others

    1994-06-01

    This remedial investigation report for operable Unit 1 (OU-1) at Eielson Air Force Base presents data, calculations, and conclusions as to the nature and extent of surface and subsurface contamination at the eight source areas that make up OU-1. The information is based on the 1993 field investigation result and previous investigations. This report is the first in a set of three for OU-1. The other reports are the baseline risk assessment and feasibility study. The information in these reports will lead to a Record of Decision that will guide and conclude the environmental restoration effort for OU-1 at Eielson Air Force Base. The primary contaminants of concern include fuels and fuel-related contaminants (diesel; benzene, toluene, ethylbenzene, and xylene; total petroleum hydrocarbon; polycyclic aromatic hydrocarbons), maintenance-related solvents and cleaners (volatile chlorinated hydrocarbons such as trichloroothylene), polychlorinated biphenyls, and dichlorodiphenyltrichloroethane (DDT). The origins of contaminants of concern include leaks from storage tanks, drums and piping, and spills. Ongoing operations and past sitewide practices also contribute to contaminants of concern at OU-1 source areas. These include spraying mixed oil and solvent wastes on unpaved roads and aerial spraying of DDT.

  18. Cell force mapping using a double-sided micropillar array based on the moiré fringe method

    Science.gov (United States)

    Zhang, F.; Anderson, S.; Zheng, X.; Roberts, E.; Qiu, Y.; Liao, R.; Zhang, X.

    2014-07-01

    The mapping of traction forces is crucial to understanding the means by which cells regulate their behavior and physiological function to adapt to and communicate with their local microenvironment. To this end, polymeric micropillar arrays have been used for measuring cell traction force. However, the small scale of the micropillar deflections induced by cell traction forces results in highly inefficient force analyses using conventional optical approaches; in many cases, cell forces may be below the limits of detection achieved using conventional microscopy. To address these limitations, the moiré phenomenon has been leveraged as a visualization tool for cell force mapping due to its inherent magnification effect and capacity for whole-field force measurements. This Letter reports an optomechanical cell force sensor, namely, a double-sided micropillar array (DMPA) made of poly(dimethylsiloxane), on which one side is employed to support cultured living cells while the opposing side serves as a reference pattern for generating moiré patterns. The distance between the two sides, which is a crucial parameter influencing moiré pattern contrast, is predetermined during fabrication using theoretical calculations based on the Talbot effect that aim to optimize contrast. Herein, double-sided micropillar arrays were validated by mapping mouse embryo fibroblast contraction forces and the resulting force maps compared to conventional microscopy image analyses as the reference standard. The DMPA-based approach precludes the requirement for aligning two independent periodic substrates, improves moiré contrast, and enables efficient moiré pattern generation. Furthermore, the double-sided structure readily allows for the integration of moiré-based cell force mapping into microfabricated cell culture environments or lab-on-a-chip devices.

  19. Upper-crustal structure beneath the strait of Georgia, Southwest British Columbia

    Science.gov (United States)

    Dash, R.K.; Spence, G.D.; Riedel, M.; Hyndman, R.D.; Brocher, T.M.

    2007-01-01

    We present a new three-dimensional (3-D) P-wave velocity model for the upper-crustal structure beneath the Strait of Georgia, southwestern British Columbia based on non-linear tomographic inversion of wide-angle seismic refraction data. Our study, part of the Georgia Basin Geohazards Initiative (GBGI) is primarily aimed at mapping the depth of the Cenozoic sedimentary basin and delineating the near-surface crustal faults associated with recent seismic activities (e.g. M = 4.6 in 1997 and M = 5.0 in 1975) in the region. Joint inversion of first-arrival traveltimes from the 1998 Seismic Hazards Investigation in Puget Sound (SHIPS) and the 2002 Georgia Basin experiment provides a high-resolution velocity model of the subsurface to a depth of ???7 km. In the southcentral Georgia Basin, sedimentary rocks of the Cretaceous Nanaimo Group and early Tertiary rocks have seismic velocities between 3.0 and 5.5 km s-1. The basin thickness increases from north to south with a maximum thickness of 7 (??1) km (depth to velocities of 5.5 km s-1) at the southeast end of the strait. The underlying basement rocks, probably representing the Wrangellia terrane, have velocities of 5.5-6.5 km-1 with considerable lateral variation. Our tomographic model reveals that the Strait of Georgia is underlain by a fault-bounded block within the central Georgia Basin. It also shows a correlation between microearthquakes and areas of rapid change in basin thickness. The 1997/1975 earthquakes are located near a northeast-trending hinge line where the thicknesses of sedimentary rocks increase rapidly to the southeast. Given its association with instrumentally recorded, moderate sized earthquakes, we infer that the hinge region is cored by an active fault that we informally name the Gabriola Island fault. A northwest-trending, southwest dipping velocity discontinuity along the eastern side of Vancouver Island correlates spatially with the surface expression of the Outer Island fault. The Outer Island

  20. The Relationship between Principal Leadership and Teacher Morale in the Elementary Schools in a Northwest Georgia School District

    Science.gov (United States)

    Webb, Dan O.

    2014-01-01

    This study examined the difference between 2012 CRCT math sores based on principal leadership styles and teacher morale, as well as the relationship between teacher morale and 2012 CRCT math scores at each of the 12 elementary schools within a Northwest Georgia county school district. There is a gap in current research regarding the importance of…

  1. Statewide Evaluation of Local Wellness Policies in Georgia: An Examination of Policy Compliance, Policy Strength, and Associated Factors

    Science.gov (United States)

    Lyn, Rodney; O'Meara, Sandra; Hepburn, Valerie A.; Potter, Anna

    2012-01-01

    Objective: To analyze relationships between demographic characteristics of Georgia school systems and: (1) compliance with the Child Nutrition and WIC Reauthorization Act (CNRA); and (2) strength of wellness policy goals in nutrition, physical activity, and other school-based activities. Design: Each local school district submitted their…

  2. The vulnerability of the Strait of Georgia (Canada) to future hypoxia and ocean acidification

    Science.gov (United States)

    Ianson, Debby; Allen, Susan; Moore-Maley, Ben; Haigh, Rowan; Johannessen, Sophia; Macdonald, Robie; Krogh, Jeremy; Simpson, Eleanor; Kohfeld, Karen; Hamme, Roberta

    2016-04-01

    The Canadian Pacific coast is filled with fjords and islands. Circulation in the region is dynamic, so that large changes in acidity (pH) and oxygen may occur both in space and time. The Strait of Georgia (Canada) is a large (200 X 30 km) semi-enclosed basin, that has relatively low pH with respect to the adjacent outer coast and yet hosts a lucrative aquaculture industry. On the other hand this region is relatively well oxygenated due to gas exchange in the turbulent (tidal) flow in the narrow Straits with sills connecting it with the outer coast. We investigate the role that this intense gas exchange plays in protecting the Strait of Georgia from future hypoxia and ocean acidification. Finally, we contrast surface water properties (including dissolved inorganic carbon and total alkalinity) measured on large ships with those measured nearshore and at shore-based aquaculture sites within the Strait.

  3. Identity processes and statuses in post-Soviet Georgia: Exploration processes operate differently.

    Science.gov (United States)

    Skhirtladze, Nino; Javakhishvili, Nino; Schwartz, Seth J; Beyers, Wim; Luyckx, Koen

    2016-02-01

    Identity formation is one of the main developmental tasks of emerging adulthood. Based on quantitative data on a five-dimensional model of identity formation, we concluded that the identity formation process has some different features in the Republic of Georgia than it does in many Western countries. Results obtained from young Georgian adults (N = 295, 82.6% female) yielded four exploration processes instead of three, which is in line with the recent Swiss findings. A key difference between Georgia and the Western contexts, however, is that exploration in breadth is highly correlated with ruminative exploration. Cluster analysis, which produced six identity clusters, also supported this pattern. Achievement, the most adjusted cluster in Western contexts, was relatively low on exploration in breadth. We discuss ways in which the Georgian transition from Soviet communism to a more globalized society may contribute to limited opportunities for identity exploration and may add some tension to the identity development process.

  4. Climate responses to SATIRE and SIM-based spectral solar forcing in a 3D atmosphere-ocean coupled GCM

    Directory of Open Access Journals (Sweden)

    Wen Guoyong

    2017-01-01

    Full Text Available We apply two reconstructed spectral solar forcing scenarios, one SIM (Spectral Irradiance Monitor based, the other the SATIRE (Spectral And Total Irradiance REconstruction modeled, as inputs to the GISS (Goddard Institute for Space Studies GCMAM (Global Climate Middle Atmosphere Model to examine climate responses on decadal to centennial time scales, focusing on quantifying the difference of climate response between the two solar forcing scenarios. We run the GCMAM for about 400 years with present day trace gas and aerosol for the two solar forcing inputs. We find that the SIM-based solar forcing induces much larger long-term response and 11-year variation in global averaged stratospheric temperature and column ozone. We find significant decreasing trends of planetary albedo for both forcing scenarios in the 400-year model runs. However the mechanisms for the decrease are very different. For SATIRE solar forcing, the decreasing trend of planetary albedo is associated with changes in cloud cover. For SIM-based solar forcing, without significant change in cloud cover on centennial and longer time scales, the apparent decreasing trend of planetary albedo is mainly due to out-of-phase variation in shortwave radiative forcing proxy (downwelling flux for wavelength >330 nm and total solar irradiance (TSI. From the Maunder Minimum to present, global averaged annual mean surface air temperature has a response of ~0.1 °C to SATIRE solar forcing compared to ~0.04 °C to SIM-based solar forcing. For 11-year solar cycle, the global surface air temperature response has 3-year lagged response to either forcing scenario. The global surface air 11-year temperature response to SATIRE forcing is about 0.12 °C, similar to recent multi-model estimates, and comparable to the observational-based evidence. However, the global surface air temperature response to 11-year SIM-based solar forcing is insignificant and inconsistent with observation-based evidence.

  5. American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 224 Altus Air Force Base Solar Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Bryan J.

    2010-09-30

    The principal goal of this project was to evaluate altus Air Force Base for building integrated silicon or thin film module photovoltaic opportunities. This report documents PNNL's efforts and documents study conclusions.

  6. Adaptive method for real-time gait phase detection based on ground contact forces.

    Science.gov (United States)

    Yu, Lie; Zheng, Jianbin; Wang, Yang; Song, Zhengge; Zhan, Enqi

    2015-01-01

    A novel method is presented to detect real-time gait phases based on ground contact forces (GCFs) measured by force sensitive resistors (FSRs). The traditional threshold method (TM) sets a threshold to divide the GCFs into on-ground and off-ground statuses. However, TM is neither an adaptive nor real-time method. The threshold setting is based on body weight or the maximum and minimum GCFs in the gait cycles, resulting in different thresholds needed for different walking conditions. Additionally, the maximum and minimum GCFs are only obtainable after data processing. Therefore, this paper proposes a proportion method (PM) that calculates the sums and proportions of GCFs wherein the GCFs are obtained from FSRs. A gait analysis is then implemented by the proposed gait phase detection algorithm (GPDA). Finally, the PM reliability is determined by comparing the detection results between PM and TM. Experimental results demonstrate that the proposed PM is highly reliable in all walking conditions. In addition, PM could be utilized to analyze gait phases in real time. Finally, PM exhibits strong adaptability to different walking conditions.

  7. Modelling of Ion Transport in Solids with a General Bond Valence Based Force-Field

    Directory of Open Access Journals (Sweden)

    S. Adams

    2010-12-01

    Full Text Available Empirical bond length - bond valence relations provide insight into the link between structure of and ion transport in solid electrolytes. Building on our earlier systematic adjustment of bond valence (BV parameters to the bond softness, here we discuss how the squared BV mismatch can be linked to the absolute energy scale and used as a general Morse-type interaction potential for analyzing low-energy pathways in ion conducting solid or mixed conductors either by an energy landscape approach or by molecular dynamics (MD simulations. For a wide range of Lithium oxides we could thus model ion transport revealing significant differences to an earlier geometric approach. Our novel BV-based force-field has also been applied to investigate a range of mixed conductors, focusing on cathode materials for lithium ion battery (LIB applications to promote a systematic design of LIB cathodes that combine high energy density with high power density. To demonstrate the versatility of the new BV-based force-field it is applied in exploring various strategies to enhance the power performance of safe low cost LIB materials (LiFePO4, LiVPO4F, LiFeSO4F, etc..

  8. An Economic Valuation of Biotic Pollination Services in Georgia.

    Science.gov (United States)

    Barfield, Ashley S; Bergstrom, John C; Ferreira, Susana; Covich, Alan P; Delaplane, Keith S

    2015-04-01

    As agriculture faces documented decline in bees and other insect pollinators, empirical assessments of potential economic losses are critical for contextualizing the impacts of this decline and for prioritizing research needs. For the state of Georgia, we show that the annual economic value of biotic pollinators is substantial--US$367 million, equivalent to 13 percent of the total production value of crops studied and 3 percent of the total production value of Georgia's agricultural sector. Our unique Geographic Information Systems analysis reveals an irregular pattern of vulnerability. While the Georgia counties displaying the highest economic values of pollination are clustered in southern Georgia, those with the highest dependency on pollinators in terms of their contribution to crop production value are more dispersed throughout the state.

  9. EAARL Topography--Potato Creek Watershed, Georgia, 2010

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A digital elevation model (DEM) of a portion of the Potato Creek watershed in Georgia was produced from remotely sensed, geographically referenced elevation...

  10. EAARL Topography--Potato Creek Watershed, Georgia, 2010

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A digital elevation model (DEM) of a portion of the Potato Creek watershed in Georgia was produced from remotely sensed, geographically referenced elevation...

  11. Savannah, Georgia Tsunami Forecast Grids for MOST Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Savannah, Georgia Forecast Model Grids provides bathymetric data strictly for tsunami inundation modeling with the Method of Splitting Tsunami (MOST) model. MOST...

  12. Population Parameters and Harvest Characteristics of Black Bears in Georgia

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes findings of black bear distribution and population trends throughout Georgia and evaluates black bear harvest trends from 1992 to 2002....

  13. Combat Support Forces (1C6C) Naval Surface Forces Requirements-based Budget Determination for Assault Craft Unit ONE

    Science.gov (United States)

    2009-06-01

    period of time. It is an instrument of planning, performance measurement, decision-making, and management control , as well as a statement of priorities...Dimmerling, 1997). In 1995, Fleming wrote of the importance of budgeting. She states that “budgeting is one of the important planning and control ...Landing Craft Air Cushioned (LCAC) hovercrafts out of its base at Marine Corps Base Camp Pendleton located in North San Diego County, California

  14. Curtailment of soil vapor extraction systems at McClellan Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, T.E. [BDM Federal, McClellan AFB, CA (United States); Mook, P.H. Jr.; Wong, K.B. [SM-ALC/EMR, McClellan AFB, CA (United States)

    1997-12-31

    McClellan Air Force Base (AFB), located near Sacramento, California, is one of the Strategic Environmental Research and Development Program`s National Environmental Technology Test Sites. McClellan AFB has implemented soil vapor extraction (SVE) as an Engineering Evaluation/Cost Analysis (EE/CA) non-time-critical remedial action for volatile organic compounds in soil. Operation and maintenance costs for SVE systems are increasingly becoming a major component of the environmental clean-up budget. In an effort to reduce costs, while assuring the protection of public health and the environment, a risk-based strategy has been developed for the curtailment and eventual shut-down of SVE systems at McClellan AFB. This paper presents an overview of the SVE EE/CA process and a detailed description of the development and implementation of the curtailment strategy. Included in the discussion are details of the public and regulatory involvement in the process.

  15. Exponential Brute-Force Complexity of A Permutation Based Stream Cipher

    Directory of Open Access Journals (Sweden)

    Mohammed Omari

    2013-01-01

    Full Text Available This paper introduces a permutation generation mechanism based on a shared secret key. The generated permutation vectors are used as encryption keys in a stream ciphering cryptosystem. We investigated various types of attacks on the known stream cipher RC4 and patched most of its loopholes, especially biased-byte and state-related attacks. Unique to our approach, we prove mathematically that the complexity of brute-forcing such a system is (2n, where n is the key size in bytes. This paper also presents a complete security model using permutation-based encryption, in order to handle privacy. In addition, our approach achieved higher performance than that of existing peer techniques, while maintaining solid security. Experimental results show that our system is much faster than the existing security mechanisms, such as AES and DES.

  16. Eielson Air Force Base operable unit 2 and other areas record of decision

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, R.E.; Smith, R.M.

    1994-10-01

    This decision document presents the selected remedial actions and no action decisions for Operable Unit 2 (OU2) at Eielson Air Force Base (AFB), Alaska, chosen in accordance with state and federal regulations. This document also presents the decision that no further action is required for 21 other source areas at Eielson AFB. This decision is based on the administrative record file for this site. OU2 addresses sites contaminated by leaks and spills of fuels. Soils contaminated with petroleum products occur at or near the source of contamination. Contaminated subsurface soil and groundwater occur in plumes on the top of a shallow groundwater table that fluctuates seasonally. These sites pose a risk to human health and the environment because of ingestion, inhalation, and dermal contact with contaminated groundwater. The purpose of this response is to prevent current or future exposure to the contaminated groundwater, to reduce further contaminant migration into the groundwater, and to remediate groundwater.

  17. Environmental Assessment for Construction of Base Training Area, Schriever Air Force Base, Colorado

    Science.gov (United States)

    2010-12-01

    bed-down, biological/chemical warfare training, and bivouac training. In order to meet air quality standards when smoke grenades/obscurants are used...users of the Base Training Area would be active duty military assigned to SAFB. To ensure that no smoke or dust leave the SAFB boundary, any smoke ...receipt of the above referenced Environmental Assesment and is familiar with the site. Based on the location and type of action being proposed the

  18. CUSTOMS MODERNIZATION IN GEORGIA:CHANGES, OUTCOMES, AND FUTURE PERSPECTIVES

    OpenAIRE

    Chikovani, Elene; Avaliani, Mariam

    2011-01-01

    Since 2004, Georgia has been carrying out systemic reform aimed at modernizing the old, corrupted, customs system. The country intends to bring current legislation into harmony with European legislative regulations, increase revenue mobilization through improved customs administration, simplify customs procedures, and refine the customer culture. Georgia has been applying numerous innovative approaches throughout this process. The article focuses on the important challenges in the customs sys...

  19. Archaeological Survey and Testing at Hunter Army Airfield, Savannah, Georgia

    Science.gov (United States)

    1984-01-01

    1978; DePratter 1975; DePratter and Howard 1977). Apparently at least some of these materials were deposited as terrestial sites during a low stand...DePratter, Chester B. and J. D. Howard 1977 History of Shoreline Changes Determined by Archaeological Dating: Georgia Coast, U.S.A. Transactions of the Gulf...relationships. Des Barres, J-F. W. 1780 The Coast, Rivers and Inlets of the Province of Georgi -. Map Collection (#61), Georgia Historical Society

  20. Assessment of groundwater pathways and contaminant transport in Florida and Georgia using multiple chemical and microbiological indicators

    Science.gov (United States)

    Mahon, Gary L.

    2011-01-01

    The hydrogeology of Florida, especially in the northern part of the state, and southwestern Georgia is characterized by a predominance of limestone aquifers overlain by varying amounts of sands, silts, and clays. This karstic system of aquifers and their associated springs is particularly vulnerable to contamination from various anthropogenic activities at the land surface. Numerous sinkholes, disappearing streams, and conduit systems or dissolution pathways, often associated with large spring systems, allow rapid movement of contaminants from the land surface to the groundwater system with little or no attenuation or degradation. The fate of contaminants in the groundwater system is not fully understood, but traveltimes from sources are greatly reduced when conduits are intercepted by pumping wells and springs. Contaminant introduction to groundwater systems in Florida and Georgia is not limited to seepage from land surface, but can be associated with passive (drainage wells) and forced subsurface injection (aquifer storage and recovery, waste-water disposal).

  1. The Polarizable Atomic Multipole-based AMOEBA Force Field for Proteins.

    Science.gov (United States)

    Shi, Yue; Xia, Zhen; Zhang, Jiajing; Best, Robert; Wu, Chuanjie; Ponder, Jay W; Ren, Pengyu

    2013-01-01

    Development of the AMOEBA (Atomic Multipole Optimized Energetics for Biomolecular Simulation) force field for proteins is presented. The current version (AMOEBA-2013) utilizes permanent electrostatic multipole moments through the quadrupole at each atom, and explicitly treats polarization effects in various chemical and physical environments. The atomic multipole electrostatic parameters for each amino acid residue type are derived from high-level gas phase quantum mechanical calculations via a consistent and extensible protocol. Molecular polarizability is modeled via a Thole-style damped interactive induction model based upon distributed atomic polarizabilities. Inter- and intramolecular polarization is treated in a consistent fashion via the Thole model. The intramolecular polarization model ensures transferability of electrostatic parameters among different conformations, as demonstrated by the agreement between QM and AMOEBA electrostatic potentials, and dipole moments of dipeptides. The backbone and side chain torsional parameters were determined by comparing to gas-phase QM (RI-TRIM MP2/CBS) conformational energies of dipeptides and to statistical distributions from the Protein Data Bank. Molecular dynamics simulations are reported for short peptides in explicit water to examine their conformational properties in solution. Overall the calculated conformational free energies and J-coupling constants are consistent with PDB statistics and experimental NMR results, respectively. In addition, the experimental crystal structures of a number of proteins are well maintained during molecular dynamics (MD) simulation. While further calculations are necessary to fully validate the force field, initial results suggest the AMOEBA polarizable multipole force field is able to describe the structure and energetics of peptides and proteins, in both gas-phase and solution environments.

  2. The study on the atomic force microscopy base nanoscale electrical discharge machining.

    Science.gov (United States)

    Huang, Jen-Ching; Chen, Chung-Ming

    2012-01-01

    This study proposes an innovative atomic force microscopy (AFM) based nanoscale electrical discharge machining (AFM-based nanoEDM) system which combines an AFM with a self-produced metallic probe and a high-voltage generator to create an atmospheric environment AFM-based nanoEDM system and a deionized water (DI water) environment AFM-based nanoEDM system. This study combines wire-cut processing and electrochemical tip sharpening techniques on a 40-µm thick stainless steel sheet to produce a high conductive AFM probes, the production can withstand high voltage and large current. The tip radius of these probes is approximately 40 nm. A probe test was executed on the AFM using probes to obtain nanoscales morphology of Si wafer surface. The silicon wafer was as a specimen to carry out AFM-base nanoEDM process in atmospheric and DI water environments by AFM-based nanoEDM system. After experiments, the results show that the atmospheric and DI water environment AFM-based nanoEDM systems operate smoothly. From experimental results, it can be found that the electric discharge depth of the silicon wafer at atmospheric environments is a mere 14.54 nm. In a DI water environment, the depth of electric discharge of the silicon wafer can reach 25.4 nm. This indicates that the EDM ability of DI water environment AFM-based nanoEDM system is higher than that of atmospheric environment AFM-based nanoEDM system. After multiple nanoEDM process, the tips become blunt. After applying electrochemical tip sharpening techniques, the tip radius can return to approximately 40 nm. Therefore, AFM probes produced in this study can be reused.

  3. Determinants analysis of outpatient service utilisation in Georgia: can the approach help inform benefit package design?

    Science.gov (United States)

    Gotsadze, George; Tang, Wenze; Shengelia, Natia; Zoidze, Akaki

    2017-05-02

    The healthcare financing reforms initiated by the Government of Georgia in 2007 have positively affected inpatient service utilisation and enhanced financial protection, especially for the poor, but they have failed to facilitate outpatient service use among chronic patients. Non-communicable diseases significantly affect Georgia's ageing population. Consequently, in this paper, we look at the evidence emerging from determinants analysis of outpatient service utilisation and if the finding can help identify possible policy choices in Georgia, especially regarding benefit package design for individuals with chronic conditions. We used Andersen's behavioural model of health service utilisation to identify the critical determinants that affect outpatient service use. A multinomial logistic regression was carried out with complex survey design using the data from two nationally representative cross-sectional population-based health utilisation and expenditure surveys conducted in Georgia in 2007 and 2010, which allowed us to assess the relationship between the determinants and outpatient service use. The study revealed the determinants that significantly impede outpatient service use. Low income, 45- to 64-year-old Georgian males with low educational attainment and suffering from a chronic health problem have the lowest odds for service use compared to the rest of the population. Using Andersen's behavioural model and assessing the determinants of outpatient service use has the potential to inform possible policy responses, especially those driving services use among chronic patients. The possible policy responses include reducing financial access barriers with the help of public subsidies for sub-groups of the population with the lowest access to care; focusing/expanding state-funded benefits for the most prevalent chronic conditions, which are responsible for the greatest disease burden; or supporting chronic disease management programs for the most prevalent chronic

  4. Potential overflow of Mojave Creek near disposal site, Edwards Air Force Base, California

    Science.gov (United States)

    Dinehart, Randy L.; Harmon, Jerry G.

    1998-01-01

    Sedimentological evidence in Mojave Creek near Edwards, California, indicates that the largest discharge in the last hundred years near the disposal site of the Main Base Landfill at Edwards Air Force Base was a few hundred cubic feet per second. The distal ends of two alluvial fans on the Mojave Creek floodplain near the Main Base Landfill have not been eroded substantially since sediment supply was cut off by a railroad grade completed in 1884. Previous estimates of flood discharges were 4,000 cubic feet per second and larger in this reach; the estimates were calculated by regression equations derived from regional characteristics. However, a 100-year rainfall in 1983 failed to produce erosion in Mojave Creek commensurate with discharges of greater than about 100 cubic feet per second. To test the potential for the creek to overflow and reach the disposal site, a hypothetical discharge was used to determine the depth of flooding at local cross sections. Although the access road from Mojave Boulevard to the Main Base Landfill may be inundated during a flood, the artificial grade at the disposal site would not be reached at a discharge of 2,000 cubic feet per second, which is an order of magnitude greater than the apparent flood discharges that occurred during the past hundred years in Mojave Creek near the present Main Base Landfill.

  5. Point Defects in Carbon Nanotubes: ab initio and Force-Fields Based Simulations

    Science.gov (United States)

    Kroes, Jaap; Pietrucci, Fabio; Curioni, Alessandro; Andreoni, Wanda

    2014-03-01

    We present an extended investigation of point defects in carbon nanotubes (CNTs) and their effects on mechanical and electronic properties. This study is based on large-scale calculations using DFT with exchange and correlation functionals of the GGA - including empirical corrections for van-der-Waals interactions - and of the hybrid type. Additional simulations using classical interatomic potentials allow us to obtain a critical comparison between the outcome of DFT and force-fields. The CNT models adopted have a range of sizes and chiralities. In particular, (i) our simulations of oxygen chemisorption revealed a tendency to clustering and the existence of kinetic traps (epoxides), which explain STS data; (ii) the extension to oxygen isovalent species on CNTs and other graphitic surfaces has suggested a simple predictive model for the chemisorption pattern. Moreover, (iii) our analysis shows an intrinsic difficulty of available force fields to account for the energetics of vacancies and adsorption site preferences. Additional results aiming at characterizing the interaction of nitrogen oxides (NOx) with the CNT surface will also be presented. Work supported by SNSF Nano-Tera.ch and CSCS.

  6. The force analysis for superparamagnetic nanoparticles-based gene delivery in an oscillating magnetic field

    Science.gov (United States)

    Sun, Jiajia; Shi, Zongqian; Jia, Shenli; Zhang, Pengbo

    2017-04-01

    Due to the peculiar magnetic properties and the ability to function in cell-level biological interaction, superparamagnetic nanoparticles (SMNP) have been being the attractive carrier for gene delivery. The superparamagnetic nanoparticles with surface-bound gene vector can be attracted to the surface of cells by the Kelvin force provided by external magnetic field. In this article, the influence of the oscillating magnetic field on the characteristics of magnetofection is studied in terms of the magnetophoretic velocity. The magnetic field of a cylindrical permanent magnet is calculated by equivalent current source (ECS) method, and the Kelvin force is derived by using the effective moment method. The results show that the static magnetic field accelerates the sedimentation of the particles, and drives the particles inward towards the axis of the magnet. Based on the investigation of the magnetophoretic velocity of the particle under horizontally oscillating magnetic field, an oscillating velocity within the amplitude of the magnet oscillation is observed. Furthermore, simulation results indicate that the oscillating amplitude plays an important role in regulating the active region, where the particles may present oscillating motion. The analysis of the magnetophoretic velocity gives us an insight into the physical mechanism of the magnetofection. It's also helpful to the optimal design of the magnetofection system.

  7. Patrick Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sandusky, W.F.; Parker, S.A.; King, D.A.; Wahlstrom, R.R.; Elliott, D.B.; Shankle, S.A.

    1993-12-01

    The US Air Force has tasked the Pacific Northwest Laboratory (PNL) in support of the US Department of Energy Federal Energy Management Program to identify, evaluate, and assist in acquiring all cost effective energy projects at Patrick Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Patrick AFB which is located south of Cocoa Beach, Florida. It is a companion report to Volume 1, Executive Summary, and Volume.2, Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance, and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost analysis indicating the net present value and value index of each ERO.

  8. Web-based evaluation of experts' opinions on impacted maxillary canines forced eruption using CBCT

    Directory of Open Access Journals (Sweden)

    Amirfarhang Miresmaeili

    2015-04-01

    Full Text Available AIM: This study aims at examining the difficulty in performing forced eruption of impacted maxillary canines, using CBCT information and according to experienced orthodontist's opinion. The second aim was to find the most important factors related to this decision. METHODS: Based on a careful literature review on impacted maxillary canines, ten main factors were selected to assess difficulties associated with impacted teeth. Thirty six consecutive patients with 50 impacted maxillary canines were examined and variables were measured for each impacted tooth using Dolphin 3D software. Ten orthodontists assessed the radiographs of teeth and provided their opinion on the difficulty in bringing impacted teeth into occlusion named subjective degree of difficulty (SDD. The correlation established between mean SDD of each tooth and measured variables were analyzed by means of linear regression. RESULTS: Mean SDD was 6.45 ± 1.22 for all 50 teeth. Linear regression showed a high coefficient of correlation between mean SDD and age, dilacerations, vertical height, angulation and horizontal overlap (P < 0.05. CONCLUSION: To predict the difficulty of impacted maxillary canines forced eruption, according to the opinion of experienced orthodontists, the factors age, dilaceration, angulation, overlap and vertical distance from the occlusal plane are the most important variables.

  9. A Two-Dimensional Deflection Sensor Based on Force Sensing Resistors

    Directory of Open Access Journals (Sweden)

    Chuangqiang Guo

    2017-01-01

    Full Text Available A flexible deflection sensor for elastic shaft with the capability of measuring the amplitude and direction of bending is introduced in this paper. A thin force sensing resistors (FSR film is taken as its basic material, which is sandwiched by an elastomer layer and a printed circuit board (PCB with detecting electrode grids. Two fix rings are used to fix the three thin components perpendicularly to the longitudinal direction of the flexible shaft. When the shaft bends under forces, the fix rings will generate a normal pressure on FSR, which will cause the change of the resistance. Therefore, the amplitude of bending can be got based on the value of resistance. The electrode grid on the PCB is divided into four detection areas used to estimate the distribution of normal pressure on the FSR; thus the bending direction of shaft can also be obtained. Test results of a prototype (140 mm in length show that the amplitude of deflection can reach 30 mm and the sensitivities of sensor are 40.37, 32.8, 37.77, and 39.47 mV/mm in the four directions, respectively. The proposed flexible deflection sensor can be applied in continuum robots or other applications, which require rapid measurement of bending amplitude and direction.

  10. Quality of handwriting: Intervention based on the variation of finger force production

    Directory of Open Access Journals (Sweden)

    Adriano Percival Calvo

    2014-09-01

    Full Text Available Difficulties in the production of proficient handwriting can be detected early in childhood. From the control point of view, non-proficient handwriting can be explained by the difficulty in adequately activating motor synergies that give support to this motor skill. Therefore, imposing different demand on the control to the motor synergies of the fingers can generate improvement in the quality of handwriting. The goal of the present study was to verify the effects of an intervention program for children with handwriting difficulties, composed of manipulative and pre-calligraphic activities that stimulate finger motor synergies through different force production demands. Thirty-four children between 7 and 12 years of age participated in the present study. Handwriting quality was evaluated through the Minnesota Handwriting Assessment. Only the experimental group (n=18 was submitted to the intervention program developed throughout 27 sessions of 30 minutes each. The results indicate that the intervention program based on the variability of force production had a positive effect on the quality of handwriting,mainly in terms of the size of letters.

  11. Selected low-flow frequency statistics for continuous-record streamgages in Georgia, 2013

    Science.gov (United States)

    Gotvald, Anthony J.

    2016-04-13

    and southern Georgia is outside the scope of this study. Further study is needed to determine some of the causes, including both climatological and human impacts, of the significant negative trends in annual minimum 1-day and 7-day average flows in central and southern Georgia.To assess the changes in the annual 1Q10 and 7Q10 statistics over time for long-term continuous streamgages with significant trends in record, the annual 1Q10 and 7Q10 statistics were computed on a decadal accumulated basis for 39 streamgages having 40 or more years of record that indicated a significant trend. Records from most of the streamgages showed a decline in 7Q10 statistics for the decades of 1980–89, 1990–99, and 2000–09 because of the recent droughts in Georgia. Twenty four of the 39 streamgages had complete records from 1980 to 2010, and records from 23 of these gages exhibited a decline in the 7Q10 statistics during this period, ranging from –6.3 to –76.2 percent with a mean of –27.3 percent. No attempts were made during this study to adjust streamflow records or statistical analyses on the basis of trends.The monthly and annual 1Q10 and 7Q10 flow statistics for the entire period of record analyzed in the study are incorporated into the USGS StreamStatsDB, which is a database accessible to users through the recently released USGS StreamStats application for Georgia. StreamStats is a Web-based geographic information system that provides users with access to an assortment of analytical tools that are useful for water-resources planning and management, and for engineering design applications, such as the design of bridges. StreamStats allows users to easily obtain streamflow statistics, basin characteristics, and other information for user-selected streamgages.

  12. FxLMS Method for Suppressing In-Wheel Switched Reluctance Motor Vertical Force Based on Vehicle Active Suspension System

    Directory of Open Access Journals (Sweden)

    Yan-yang Wang

    2014-01-01

    Full Text Available The vibration of SRM obtains less attention for in-wheel motor applications according to the present research works. In this paper, the vertical component of SRM unbalanced radial force, which is named as SRM vertical force, is taken into account in suspension performance for in-wheel motor driven electric vehicles (IWM-EV. The analysis results suggest that SRM vertical force has a great effect on suspension performance. The direct cause for this phenomenon is that SRM vertical force is directly exerted on the wheel, which will result in great variation in tyre dynamic load and the tyre will easily jump off the ground. Furthermore, the frequency of SRM vertical force is broad which covers the suspension resonance frequencies. So it is easy to arouse suspension resonance and greatly damage suspension performance. Aiming at the new problem, FxLMS (filtered-X least mean square controller is proposed to improve suspension performance. The FxLMS controller is based on active suspension system which can generate the controllable force to suppress the vibration caused by SRM vertical force. The conclusion shows that it is effective to take advantage of active suspensions to reduce the effect of SRM vertical force on suspension performance.

  13. A Predictive Model of Cell Traction Forces Based on Cell Geometry

    OpenAIRE

    Lemmon, Christopher A.; Romer, Lewis H

    2010-01-01

    Recent work has indicated that the shape and size of a cell can influence how a cell spreads, develops focal adhesions, and exerts forces on the substrate. However, it is unclear how cell shape regulates these events. Here we present a computational model that uses cell shape to predict the magnitude and direction of forces generated by cells. The predicted results are compared to experimentally measured traction forces, and show that the model can predict traction force direction, relative m...

  14. Effectiveness of an Individualized Training Based on Force-Velocity Profiling during Jumping

    Science.gov (United States)

    Jiménez-Reyes, Pedro; Samozino, Pierre; Brughelli, Matt; Morin, Jean-Benoît

    2017-01-01

    Ballistic performances are determined by both the maximal lower limb power output (Pmax) and their individual force-velocity (F-v) mechanical profile, especially the F-v imbalance (FVimb): difference between the athlete's actual and optimal profile. An optimized training should aim to increase Pmax and/or reduce FVimb. The aim of this study was to test whether an individualized training program based on the individual F-v profile would decrease subjects' individual FVimb and in turn improve vertical jump performance. FVimb was used as the reference to assign participants to different training intervention groups. Eighty four subjects were assigned to three groups: an “optimized” group divided into velocity-deficit, force-deficit, and well-balanced sub-groups based on subjects' FVimb, a “non-optimized” group for which the training program was not specifically based on FVimb and a control group. All subjects underwent a 9-week specific resistance training program. The programs were designed to reduce FVimb for the optimized groups (with specific programs for sub-groups based on individual FVimb values), while the non-optimized group followed a classical program exactly similar for all subjects. All subjects in the three optimized training sub-groups (velocity-deficit, force-deficit, and well-balanced) increased their jumping performance (12.7 ± 5.7% ES = 0.93 ± 0.09, 14.2 ± 7.3% ES = 1.00 ± 0.17, and 7.2 ± 4.5% ES = 0.70 ± 0.36, respectively) with jump height improvement for all subjects, whereas the results were much more variable and unclear in the non-optimized group. This greater change in jump height was associated with a markedly reduced FVimb for both force-deficit (57.9 ± 34.7% decrease in FVimb) and velocity-deficit (20.1 ± 4.3%) subjects, and unclear or small changes in Pmax (−0.40 ± 8.4% and +10.5 ± 5.2%, respectively). An individualized training program specifically based on FVimb (gap between the actual and optimal F-v profiles of

  15. A review of measurement-based assessments of the aerosol direct radiative effect and forcing

    Directory of Open Access Journals (Sweden)

    H. Yu

    2006-01-01

    Full Text Available Aerosols affect the Earth's energy budget directly by scattering and absorbing radiation and indirectly by acting as cloud condensation nuclei and, thereby, affecting cloud properties. However, large uncertainties exist in current estimates of aerosol forcing because of incomplete knowledge concerning the distribution and the physical and chemical properties of aerosols as well as aerosol-cloud interactions. In recent years, a great deal of effort has gone into improving measurements and datasets. It is thus feasible to shift the estimates of aerosol forcing from largely model-based to increasingly measurement-based. Our goal is to assess current observational capabilities and identify uncertainties in the aerosol direct forcing through comparisons of different methods with independent sources of uncertainties. Here we assess the aerosol optical depth (τ, direct radiative effect (DRE by natural and anthropogenic aerosols, and direct climate forcing (DCF by anthropogenic aerosols, focusing on satellite and ground-based measurements supplemented by global chemical transport model (CTM simulations. The multi-spectral MODIS measures global distributions of aerosol optical depth (τ on a daily scale, with a high accuracy of ±0.03±0.05τ over ocean. The annual average τ is about 0.14 over global ocean, of which about 21%±7% is contributed by human activities, as estimated by MODIS fine-mode fraction. The multi-angle MISR derives an annual average AOD of 0.23 over global land with an uncertainty of ~20% or ±0.05. These high-accuracy aerosol products and broadband flux measurements from CERES make it feasible to obtain observational constraints for the aerosol direct effect, especially over global the ocean. A number of measurement-based approaches estimate the clear-sky DRE (on solar radiation at the top-of-atmosphere (TOA to be about -5.5±0.2 Wm-2 (median ± standard error from various methods over the global ocean. Accounting for thin cirrus

  16. A Three-Dimensional Shape-Based Force and Stiffness-Sensing Platform for Tendon-Driven Catheters

    Directory of Open Access Journals (Sweden)

    Minou Kouh Soltani

    2016-06-01

    Full Text Available This paper presents an efficient shape-based three-axial force and stiffness estimator for active catheters commonly implemented in cardiac ablation. The force-sensing capability provides important feedback for catheterization procedures including real-time control and catheter steering in autonomous navigation systems. The proposed platform is based on the introduced accurate and computationally efficient Cosserat rod model for tendon-driven catheters. The proposed nonlinear Kalman filter formulation for contact force estimation along with the developed catheter model provides a real-time force observer robust to nonlinearities and noise covariance uncertainties. Furthermore, the proposed platform enables stiffness estimation in addition to tip contact force sensing in different operational circumstances. The approach incorporates pose measurements which can be achieved using currently developed pose-sensing systems or imaging techniques. The method makes the approach compatible with the range of forces applied in clinical applications. The simulation and experimental results verify the viability of the introduced force and stiffness-sensing technique.

  17. A Three-Dimensional Shape-Based Force and Stiffness-Sensing Platform for Tendon-Driven Catheters

    Science.gov (United States)

    Kouh Soltani, Minou; Khanmohammadi, Sohrab; Ghalichi, Farzan

    2016-01-01

    This paper presents an efficient shape-based three-axial force and stiffness estimator for active catheters commonly implemented in cardiac ablation. The force-sensing capability provides important feedback for catheterization procedures including real-time control and catheter steering in autonomous navigation systems. The proposed platform is based on the introduced accurate and computationally efficient Cosserat rod model for tendon-driven catheters. The proposed nonlinear Kalman filter formulation for contact force estimation along with the developed catheter model provides a real-time force observer robust to nonlinearities and noise covariance uncertainties. Furthermore, the proposed platform enables stiffness estimation in addition to tip contact force sensing in different operational circumstances. The approach incorporates pose measurements which can be achieved using currently developed pose-sensing systems or imaging techniques. The method makes the approach compatible with the range of forces applied in clinical applications. The simulation and experimental results verify the viability of the introduced force and stiffness-sensing technique. PMID:27367685

  18. Factors which influence on force of boxers` and footballers` shots on the stage of base pre-treatment

    Directory of Open Access Journals (Sweden)

    Nikitenko S.A.

    2011-02-01

    Full Text Available On the stage of base pre-treatment factors which influence on force of shots the hands of boxers and feet of footballers as a criterion of competition activity efficiency are certain. Connections are certain between force of shots by hands and feet. The objective test of the specialized sense determination of boxers` and footballers` shots is offered. It is recommended to develop maximal and explosive force of all parts of sportsman body at implementation preparatory exercises with the further transfer of physical qualities on implementation of the special exercises.

  19. Improving estimates of aerosol radiative forcing through a particle-based aerosol microphysical scheme

    Science.gov (United States)

    Fierce, L.; McGraw, R. L.

    2016-12-01

    Forcing by atmospheric aerosols remains a large source of uncertainty in assessing human influences on the climate. Although global models have moved toward including more detailed representations of aerosol populations, aerosol microphysical schemes have been evaluated against benchmark models in only limited cases. Here we introduce a new framework for simulating atmospheric aerosols based on the Quadrature Method of Moments. This new aerosol model has been designed to reproduce key features of benchmark populations simulated by the particle-resolved model PartMC-MOSAIC, while tracking as little information about aerosol distributions as is necessary. The quadrature-based model simulates the aerosol evolution using a small number of weighted particles and is, therefore, decided as a reduced particle-based model. By applying principles of maximum entropy, the quadrature-based model efficiently reproduces distributions with respect to key aerosol properties, such as critical supersaturation for cloud condensation nuclei activation and optical cross sections, with high accuracy. In addition to providing an optimized aerosol model, the present study also describes how multi-scale modeling can be used as a tool for development of advanced aerosol microphysical schemes.

  20. Force-based and displacement-based reliability assessment approaches for highway bridges under multiple hazard actions

    Directory of Open Access Journals (Sweden)

    Chao Huang

    2015-08-01

    Full Text Available The strength limit state of American Association of State Highway and Transportation Officials (AASHTO Load and Resistance Factor Design (LRFD Bridge Design Specifications is developed based on the failure probabilities of the combination of non-extreme loads. The proposed design limit state equation (DLSE has been fully calibrated for dead load and live load by using the reliability-based approach. On the other hand, most of DLSEs in other limit states, including the extreme events Ⅰ and Ⅱ, have not been developed and calibrated though taking certain probability-based concepts into account. This paper presents an assessment procedure of highway bridge reliabilities under the limit state of extreme event Ⅰ, i. e., the combination of dead load, live load and earthquake load. A force-based approach and a displacement-based approach are proposed and implemented on a set of nine simplified bridge models. Results show that the displacement-based approach comes up with more convergent and accurate reliabilities for selected models, which can be applied to other hazards.

  1. Sonic booms of space shuttles approaching Edwards Air Force Base, 1988-1993

    Science.gov (United States)

    Young, Robert W.

    2002-01-01

    From 1988 to 1993 13 sonic booms of space shuttles approaching Edwards Air Force Base were measured at a site 10 miles west of EAFB, with one to seven different sound level meters for each measurement. Results from five of these measurements are here presented. Maximum differences in measured levels between instruments for the same flight varied from 0 to 6 dB depending on the measurement descriptor and model of sound level meter. The average difference between predicted and measured values was 0.7+/-1.5 dB. For sound level meters with adequate bandwidth the waveforms measured varied from a near perfect N-wave to a more distorted form reflecting the influence of the varying condition of the atmosphere during propagation to the ground.

  2. Hot, cold, and annual reference atmospheres for Edwards Air Force Base, California (1975 version)

    Science.gov (United States)

    Johnson, D. L.

    1975-01-01

    Reference atmospheres pertaining to summer (hot), winter (cold), and mean annual conditions for Edwards Air Force Base, California, are presented from surface to 90 km altitude (700 km for the annual model). Computed values of pressure, kinetic temperature, virtual temperature, and density and relative differences percentage departure from the Edwards reference atmospheres, 1975 (ERA-75) of the atmospheric parameters versus altitude are tabulated in 250 m increments. Hydrostatic and gas law equations were used in conjunction with radiosonde and rocketsonde thermodynamic data in determining the vertical structure of these atmospheric models. The thermodynamic parameters were all subjected to a fifth degree least-squares curve-fit procedure, and the resulting coefficients were incorporated into Univac 1108 computer subroutines so that any quantity may be recomputed at any desired altitude using these subroutines.

  3. System design and new applications for atomic force microscope based on tunneling

    Science.gov (United States)

    Wang, X.; Liu, A. P.; Yang, X. H.

    2015-09-01

    The design of atomic force microscopy (AFM) with high resolution is introduced in this paper. Mainly, we have developed the system design of the apparatus based on tunneling. AFM.IPC-208B, this kind of apparatus combines scanning tunnel microscopy (STM) and AFM availability, and its lens body with original frame enhances the capability of the machine. In order to analyze the performance of AFM.IPC-208B, as a new tool in the field of Life Science, we make use of the system to study natural mica and molecular protein structures of Cattle-insulin and human antibody immunoglobulin G (IgG) coupled with staphylococcus protein A (SPA). As the results of new applications, the resolution of AFM.IPC-208B is proved to be 0.1 nm, and these nanometer measurement results provide much valuable information for the study of small molecular proteins and HIV experiments.

  4. Forced degradation studies: current trends and future perspectives for protein-based therapeutics.

    Science.gov (United States)

    Chan, Christine P

    2016-07-01

    Forced degradation (FD) studies (stress testing) are an integral part of pharmaceutical product development. The design and execution of these studies require thorough planning and coordination through the various stages of development as well as post-approval commercial operations. This is particularly crucial in the case for protein-based therapeutics due to complexity of the molecular structure as well as the potential influence of the manufacturing process on product attributes. Often, FD study applications are linked to specific product development in a phase-specific and case-by-case manner with differing purposes and focus. Expert commentary: This paper summarizes some key FD approaches commonly employed in the industry and provides considerations on study design strategies and database management through the course of the product lifecycle.

  5. Active diffusion and microtubule-based transport oppose myosin forces to position organelles in cells

    Science.gov (United States)

    Lin, Congping; Schuster, Martin; Guimaraes, Sofia Cunha; Ashwin, Peter; Schrader, Michael; Metz, Jeremy; Hacker, Christian; Gurr, Sarah Jane; Steinberg, Gero

    2016-06-01

    Even distribution of peroxisomes (POs) and lipid droplets (LDs) is critical to their role in lipid and reactive oxygen species homeostasis. How even distribution is achieved remains elusive, but diffusive motion and directed motility may play a role. Here we show that in the fungus Ustilago maydis ~95% of POs and LDs undergo diffusive motions. These movements require ATP and involve bidirectional early endosome motility, indicating that microtubule-associated membrane trafficking enhances diffusion of organelles. When early endosome transport is abolished, POs and LDs drift slowly towards the growing cell end. This pole-ward drift is facilitated by anterograde delivery of secretory cargo to the cell tip by myosin-5. Modelling reveals that microtubule-based directed transport and active diffusion support distribution, mobility and mixing of POs. In mammalian COS-7 cells, microtubules and F-actin also counteract each other to distribute POs. This highlights the importance of opposing cytoskeletal forces in organelle positioning in eukaryotes.

  6. Minimally invasive intracellular delivery based on electrokinetic forces combined with vibration-assisted cell membrane perforation

    Science.gov (United States)

    Shibata, Takayuki; Ozawa, Tatsuya; Ito, Yasuharu; Yamamoto, Keita; Nagai, Moeto

    2017-01-01

    To provide an effective platform for the fundamental analysis of cellular mechanisms and the regulation of cellular functions, we developed a unique method of minimally invasive intracellular delivery. Using this method, we successfully demonstrated the delivery of DNA molecules into living HeLa cells via a glass micropipette based on DC-biased AC-driven electrokinetic forces with much better controllability than that of the pressure-driven flow method. We also proposed a vibration-assisted insertion method for penetrating the cell membrane to reduce cell damage. Preliminary insertion tests revealed that application of mechanical oscillation can reduce the deformation of cells due to increases in their viscous resistance, resulting in a high probability of cell membrane perforation and cell viability. Moreover, to overcome the intrinsic low throughput of intracellular delivery with a single glass micropipette, we developed a fabrication process involving an array of stepped hollow silicon dioxide (SiO2) nanoneedles with well-defined tips.

  7. Atomic Force Microscopy-based Cell Nanostructure for Ligand-conjugated Quantum Dot Endocytosis

    Institute of Scientific and Technical Information of China (English)

    Yun-Long PAN; Ji-Ye CAI; Li QIN; Hao WANG

    2006-01-01

    While it has been well demonstrated that quantum dots (QDs) play an important role in biological labeling both in vitro and in vivo,there is no report describing the cellular nanostructure basis of receptor-mediated endocytosis. Here, nanostructure evolution responses to the endocytosis of transferrin force microscopy (AFM). AFM-based nanostructure analysis demonstrated that the Tf-conjugated QDs were specifically and tightly bound to the cell receptors rrelated with the cell membrane receptor-mediated transduction.Consistently, confocal microscopic and flow cytometry results have demonstrated the specificity and the internalization of Tf-QD is linearly related to time. Moreover, while the nanoparticles on the cell membrane increased, the endocytosis was still nanoparticles did not interfere sterically with the binding and function of receptors. Therefore, ligand-conjugated QDs are potentially useful in biological labeling of cells at a nanometer scale.

  8. Application of Base Force Element Method to Mesomechanics Analysis for Recycled Aggregate Concrete

    Directory of Open Access Journals (Sweden)

    Yijiang Peng

    2013-01-01

    Full Text Available The base force element method (BFEM on potential energy principle is used to analyze recycled aggregate concrete (RAC on mesolevel. The model of BFEM with triangular element is derived. The recycled aggregate concrete is taken as five-phase composites consisting of natural coarse aggregate, new mortar, new interfacial transition zone (ITZ, old mortar, and old ITZ on meso-level. The random aggregate model is used to simulate the mesostructure of recycled aggregate concrete. The mechanics properties of uniaxial compression and tension tests for RAC are simulated using the BFEM, respectively. The simulation results agree with the test results. This research method is a new way for investigating fracture mechanism and numerical simulation of mechanics properties for recycled aggregate concrete.

  9. Study of SAW Based on a Micro Force Sensor in Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Jun Wang

    2017-01-01

    Full Text Available Wireless sensor network (WSN technology has increasingly assumed an active role in detection, identification, location, and tracking applications after more than ten years of development. However, its application still suffers from technology bottlenecks, which must be solved and perfected to eliminate the key problems of the technology. This article investigates WSN acquisition nodes and analyzes the relationship between the frequency and actual pressure values of sensor nodes. The sensitive mechanism of the surface acoustic wave (SAW based on a micro force sensor is researched, and the principle of least squares method is used to establish a transformation model of frequency and pressure for the SAW sensor. According to the model, polyfit function and matrix calculation are selected to solve and calculate the estimate of the polynomial coefficients, which simulate the data acquisition of WSN nodes and draw a polynomial curve fitting. The actual SAW sensor is tested to demonstrate the reasonableness of the device stability in WSNs.

  10. The possibility of multi-layer nanofabrication via atomic force microscope-based pulse electrochemical nanopatterning.

    Science.gov (United States)

    Kim, Uksu; Morita, Noboru; Lee, Deug; Jun, Martin; Park, Jeong Woo

    2017-03-27

    Pulse electrochemical nanopatterning (PECN), a non-contact scanning probe lithography (NC-SPL) process using ultrashort voltage pulses, is based primarily on an electrochemical machining (ECM) process using localized electrochemical oxidation between a sharp tool tip and the sample surface. In this study, nanoscale oxide patterns were formed on silicon Si (100) wafer surfaces via electrochemical surface nanopatterning, by supplying external pulsed currents through non-contact atomic force microscopy. Nanoscale oxide width and height were controlled by modulating the applied pulse duration. Additionally, protruding nanoscale oxides were removed completely by simple chemical etching, showing a depressed pattern on the sample substrate surface. Nanoscale two-dimensional oxides, prepared by a localized electrochemical reaction, can be defined easily by controlling physical and electrical variables, before proceeding further to a layer-by-layer nanofabrication process.

  11. Improved social force model based on exit selection for microscopic pedestrian simulation in subway station

    Institute of Scientific and Technical Information of China (English)

    郑勋; 李海鹰; 孟令云; 许心越; 陈旭

    2015-01-01

    An improved social force model based on exit selection is proposed to simulate pedestrians’ microscopic behaviors in subway station. The modification lies in considering three factors of spatial distance, occupant density and exit width. In addition, the problem of pedestrians selecting exit frequently is solved as follows: not changing to other exits in the affected area of one exit, using the probability of remaining preceding exit and invoking function of exit selection after several simulation steps. Pedestrians in subway station have some special characteristics, such as explicit destinations, different familiarities with subway station. Finally, Beijing Zoo Subway Station is taken as an example and the feasibility of the model results is verified through the comparison of the actual data and simulation data. The simulation results show that the improved model can depict the microscopic behaviors of pedestrians in subway station.

  12. Active diffusion and microtubule-based transport oppose myosin forces to position organelles in cells

    Science.gov (United States)

    Lin, Congping; Schuster, Martin; Guimaraes, Sofia Cunha; Ashwin, Peter; Schrader, Michael; Metz, Jeremy; Hacker, Christian; Gurr, Sarah Jane; Steinberg, Gero

    2016-01-01

    Even distribution of peroxisomes (POs) and lipid droplets (LDs) is critical to their role in lipid and reactive oxygen species homeostasis. How even distribution is achieved remains elusive, but diffusive motion and directed motility may play a role. Here we show that in the fungus Ustilago maydis ∼95% of POs and LDs undergo diffusive motions. These movements require ATP and involve bidirectional early endosome motility, indicating that microtubule-associated membrane trafficking enhances diffusion of organelles. When early endosome transport is abolished, POs and LDs drift slowly towards the growing cell end. This pole-ward drift is facilitated by anterograde delivery of secretory cargo to the cell tip by myosin-5. Modelling reveals that microtubule-based directed transport and active diffusion support distribution, mobility and mixing of POs. In mammalian COS-7 cells, microtubules and F-actin also counteract each other to distribute POs. This highlights the importance of opposing cytoskeletal forces in organelle positioning in eukaryotes. PMID:27251117

  13. Driving forces for home-based reablement; a qualitative study of older adults' experiences.

    Science.gov (United States)

    Hjelle, Kari Margrete; Tuntland, Hanne; Førland, Oddvar; Alvsvåg, Herdis

    2017-09-01

    As a result of the ageing population worldwide, there has been a growing international interest in a new intervention termed 'reablement'. Reablement is an early and time-limited home-based intervention with emphasis on intensive, goal-oriented and interdisciplinary rehabilitation for older adults in need of rehabilitation or at risk of functional decline. The aim of this qualitative study was to describe how older adults experienced participation in reablement. Eight older adults participated in semi-structured interviews. A qualitative content analysis was used as the analysis strategy. Four main themes emerged from the participants' experiences of participating in reablement: 'My willpower is needed', 'Being with my stuff and my people', 'The home-trainers are essential', and 'Training is physical exercises, not everyday activities'. The first three themes in particular reflected the participants' driving forces in the reablement process. Driving forces are intrinsic motivation in interaction with extrinsic motivation. Intrinsic motivation was based on the person's willpower and responsibility, and extrinsic motivation was expressed to be strengthened by being in one's home environment with 'own' people, as well as by the co-operation with the reablement team. The reablement team encouraged and supported the older adults to regain confidence in performing everyday activities as well as participating in the society. Our findings have practical significance for politicians, healthcare providers and healthcare professionals by contributing to an understanding of how intrinsic and extrinsic motivation influence reablement. Some persons need apparently more extrinsic motivational support also after the time-limited reablement period is completed. The municipal health and care services need to consider individualised follow-up programmes after the intensive reablement period in order to maintain the achieved skills to perform everyday activities and participate in

  14. Escherichia coli removal from model substrates: Underlying mechanism based on nanofluid structural forces.

    Science.gov (United States)

    Shim, Jiyoung; Nikolov, Alex; Wasan, Darsh

    2017-07-15

    Understanding the interactions between bacteria and solid surfaces that result in bacterial adhesion and removal is of immense importance for reducing foodborne illness outbreaks. A nanofluid formulation comprised of a sodium dodecyl sulfate (SDS) micellar aqueous solution in the presence of an organic acid (as a pH controller) was used to test the E. coli K12 removal from two substrates, polyvinylchloride (PVC) and partially hydrophobic glass. We investigated the bacterial removal efficacy based on the combined effect of the nanofluid's structural forces and bacterial isoelectric point. To quantify the bacteria-PVC coverage, we used fluorescence microscope. The Langmuir isotherm at the low volume fraction was applied to estimate the adsorption energy of E. coli K12. We obtained a value of about 2.5±0.2kT. This value compared favorably with the value of 2.1kT reported previously for E. coli NCTC 9002 (Vanloosdrecht et al., 1989). We applied the dynamic light scattering method to estimate the radius of the gyration of E. coli K12. The radius of the gyration was used to estimate the limit of surface area covered by the bacterium and compared it to the surface area measured from the image taken with fluorescence microscope. We found that they are in good agreement with each other. We modeled the nanofluid oscillatory structural energy against the E. coli K12 adsorption energy by applying the statistical mechanics approach. Based on the model prediction, the oscillatory interaction energy was estimated at the vertex between a bacterium and the substrate (i.e., the wedge film's interaction energy at one particle layer). The evaluated film's repulsive energy due to the oscillatory structural forces (OSF) was about 15.6±4.4kT of the 0.02M SMNF (the SDS micellar nanofluid formulation) and several times higher than the bacterial adsorption energy, 2.5±0.2kT. The OSF of the 0.06M SMNF was measured by AFM (the oscillatory decay force curve). The period and number of

  15. Entrepreneur for Equality: Governor Rufus Brown Bullock and the Politics of Race and Commerce in Post-Civil War Georgia

    DEFF Research Database (Denmark)

    Duncan, Russell

    Rufus Bullock, reconstruction, Georgia, United States history, African American, race relations, Gilded age......Rufus Bullock, reconstruction, Georgia, United States history, African American, race relations, Gilded age...

  16. Groundwater conditions in Georgia, 2012–14

    Science.gov (United States)

    Peck, Michael F.; Painter, Jaime A.

    2016-12-07

    The U.S. Geological Survey collects groundwater data and conducts studies to monitor hydrologic conditions, better define groundwater resources, and address problems related to water supply, water use, and water quality. In Georgia, water levels were monitored continuously at 181 wells during calendar year 2012, 185 wells during calendar year 2013, and at 171 wells during calendar year 2014. Because of missing data or short periods of record (less than 3 years) for several of these wells, a total of 164 wells are discussed in this report. These wells include 17 in the surficial aquifer system, 18 in the Brunswick aquifer system and equivalent sediments, 68 in the Upper Floridan aquifer, 15 in the Lower Floridan aquifer and underlying units, 10 in the Claiborne aquifer, 1 in the Gordon aquifer, 11 in the Clayton aquifer, 16 in the Cretaceous aquifer system, 2 in Paleozoic-rock aquifers, and 6 in crystalline-rock aquifers. Data from the well network indicate that water levels generally rose during the 2012 through 2014 calendar-year period, with water levels rising in 151 wells, declining in 12, and remained about the same in 1. Water levels declined over the long-term period of record at 94 wells, increased at 60 wells, and remained relatively constant at 10 wells.In addition to continuous water-level data, periodic water-level measurements were collected and used to construct potentiometric-surface maps for the Upper Floridan aquifer in the following areas in Georgia: the Brunswick-Glynn County area during August 2012 and October 2014 and in the Albany-Dougherty County area during November 2012 and November 2014. Periodic water-level measurements were also collected and used to construct potentiometric surface maps for the Cretaceous aquifer system in the Augusta-Richmond County area during August 2012 and July 2014. In general, water levels in these areas were higher during 2014 than during 2012; however, the configuration of the potetiometric surface in each of

  17. Soil erosion and causative factors at Vandenberg Air Force Base, California

    Science.gov (United States)

    Butterworth, Joel B.

    1988-01-01

    Areas of significant soil erosion and unvegetated road cuts were identified and mapped for Vandenberg Air Force Base. One hundred forty-two eroded areas (most greater than 1.2 ha) and 51 road cuts were identified from recent color infrared aerial photography and ground truthed to determine the severity and causes of erosion. Comparison of the present eroded condition of soils (as shown in the 1986 photography) with that in historical aerial photography indicates that most erosion on the base took place prior to 1928. However, at several sites accelerated rates of erosion and sedimentation may be occurring as soils and parent materials are eroded vertically. The most conspicuous erosion is in the northern part of the base, where severe gully, sheet, and mass movement erosion have occurred in soils and in various sedimentary rocks. Past cultivation practices, compounded by highly erodible soils prone to subsurface piping, are probably the main causes. Improper range management practices following cultivation may have also increased runoff and erosion. Aerial photography from 1986 shows that no appreciable headward erosion or gully sidewall collapse have occurred in this area since 1928.

  18. Force sensor based tool condition monitoring using a heterogeneous ensemble learning model.

    Science.gov (United States)

    Wang, Guofeng; Yang, Yinwei; Li, Zhimeng

    2014-11-14

    Tool condition monitoring (TCM) plays an important role in improving machining efficiency and guaranteeing workpiece quality. In order to realize reliable recognition of the tool condition, a robust classifier needs to be constructed to depict the relationship between tool wear states and sensory information. However, because of the complexity of the machining process and the uncertainty of the tool wear evolution, it is hard for a single classifier to fit all the collected samples without sacrificing generalization ability. In this paper, heterogeneous ensemble learning is proposed to realize tool condition monitoring in which the support vector machine (SVM), hidden Markov model (HMM) and radius basis function (RBF) are selected as base classifiers and a stacking ensemble strategy is further used to reflect the relationship between the outputs of these base classifiers and tool wear states. Based on the heterogeneous ensemble learning classifier, an online monitoring system is constructed in which the harmonic features are extracted from force signals and a minimal redundancy and maximal relevance (mRMR) algorithm is utilized to select the most prominent features. To verify the effectiveness of the proposed method, a titanium alloy milling experiment was carried out and samples with different tool wear states were collected to build the proposed heterogeneous ensemble learning classifier. Moreover, the homogeneous ensemble learning model and majority voting strategy are also adopted to make a comparison. The analysis and comparison results show that the proposed heterogeneous ensemble learning classifier performs better in both classification accuracy and stability.

  19. Ground-water conditions and studies in Georgia, 2001

    Science.gov (United States)

    Leeth, David C.; Clarke, John S.; Craigg, Steven D.; Wipperfurth, Caryl J.

    2003-01-01

    The U.S. Geological Survey (USGS) collects ground-water data and conducts studies to monitor hydrologic conditions, to better define ground-water resources, and address problems related to water supply and water quality. Data collected as part of ground-water studies include geologic, geophysical, hydraulic property, water level, and water quality. A ground-water-level network has been established throughout most of the State of Georgia, and ground-water-quality networks have been established in the cities of Albany, Savannah, and Brunswick and in Camden County, Georgia. Ground-water levels are monitored continuously in a network of wells completed in major aquifers of the State. This network includes 17 wells in the surficial aquifer, 12 wells in the upper and lower Brunswick aquifers, 73 wells in the Upper Floridan aquifer, 10 wells in the Lower Floridan aquifer and underlying units, 12 wells in the Claiborne aquifer, 1 well in the Gordon aquifer, 11 wells in the Clayton aquifer, 11 wells in the Cretaceous aquifer system, 2 wells in Paleozoic-rock aquifers, and 7 wells in crystalline-rock aquifers. In this report, data from these 156 wells were evaluated to determine whether mean-annual ground-water levels were within, below, or above the normal range during 2001, based on summary statistics for the period of record. Information from these summaries indicates that water levels during 2001 were below normal in almost all aquifers monitored, largely reflecting climatic effects from drought and pumping. In addition, water-level hydrographs for selected wells indicate that water levels have declined during the past 5 years (since 1997) in almost all aquifers monitored, with water levels in some wells falling below historical lows. In addition to continuous water-level data, periodic measurements taken in 52 wells in the Camden County-Charlton County area, and 65 wells in the city of Albany-Dougherty County area were used to construct potentiometric-surface maps for

  20. Repulsive and Restoring Casimir Forces Based on Magneto-Optical Effect

    Institute of Scientific and Technical Information of China (English)

    ZENG Ran; YANG Ya-Ping

    2011-01-01

    The Casimir force direction tuned by the external magnetic field due to the magneto-optical Voigt effect is investigated. The magneto-optical effect gives rise to the modified frequency-dependent electric permittivity and thus the electromagnetic properties of the materials can be adjusted to satisfy the condition of the formation of repulsive Casimir force. It is found that between the ordinary dielectric slab and magneto-optical material slab, a repulsive force may exist by adjusting the applied magnetic field. The restoring Casimir force can also be obtained if suitable parameter values are taken. For realistic materials, the repulsive and the restoring force is shown to possibly take place at typical distances in microelectromechanical systems.%@@ The Casimir force direction tuned by the external magnetic field due to the magneto-optical Voigt effect is investigated.The magneto-optical effect gives rise to the modified frequency-dependent electric permittivity and thus the electromagnetic properties of the materials can be adjusted to satisfy the condition of the formation of repulsive Casimir force.It is found that between the ordinary dielectric slab and magneto-optical material slab,a repulsive force may exist by adjusting the applied magnetic field.The restoring Casimir force can also be obtained if suitable parameter values are taken.For realistic materials,the repulsive and the restoring force is shown to possibly take place at typical distances in microelectromechanical systems.

  1. Experimental Research of Force Feedback Dataglove Based on Pneumatic Artificial Muscle

    Institute of Scientific and Technical Information of China (English)

    SUN Zhongsheng; BAO Gang; LI Xiaoning

    2009-01-01

    Force feedback dataglove is an important interface of human-machine interaction between manipulator and virtual assembly system, which is in charge of the bidirectional transmission of movement and force information between computer and operator. The exoskeleton force feedback dataglove is designed taking the pneumatic artificial muscle as actuator, meanwhile, its structure and work principle are introduced, and the force control problem is analyzed and researched by experiment. The mathematic model of grasping rigid object for finger is established. Considering the friction of tendon-sheath system and finger deformation, the closed-loop force control for a single joint, a single finger and multi-fingers are studied respectively by the feedforward proportional-integral(PI) control method with variable arguments. On the premise of the force smoothness, the control error of the force exerted on the finger joint is in the range of ±0.25 N, which meets the requirement of force feedback. By experimental analysis, the reason of force fluctuation is that the finger joint has a small amplitude quiver, and the consistent change tendency of the force between proximal interphalangeal(PIP) joint and distal interphalangeal(DIP) joint results from their angle coupling relationship.

  2. Vulnerability assessment at a national level in Georgia

    Science.gov (United States)

    Tsereteli, N.; Arabidze, V.; Varazanashvili, O.; Gugeshashvili, T.

    2012-04-01

    Vulnerability assessment at a national level in Georgia Nino Tsereteli, Vakhtang Arabidze, Otar Varazanashvili, Tengiz Gugeshashvili The risk always exists when cities are built on. Population growth in cities and urbanization in natural hazard-prone zones leads to infrastructure expansion. The goal of the society is to construct natural hazards resistant infrastructure and minimize the expected losses. This is a complicated task as there is always knowledge deficiency on real seismic hazard and vulnerability. Assessment of vulnerability is vital in risk analysis, as vulnerability is defined in many different ways. Work presented here mostly deals with assessment of infrastructure's and population vulnerability at national level in Georgia. This work was initiated by NATO SFP project "seismic Hazard and Risk Assessment for Southern Caucasus - Eastern Turkey Energy Corridors" and the two work packages WP4 (seismic risk) and WP5 (city scenarios) of risk module of EMME (Earthquake Model of the Middle East Region) project. First step was creation databases (inventory) of elements at risk in GIS. Element at risk were the buildings, population, pipelines. The inventories was studied and Created in GIS for the following categories: Building material, number of stories, number of entrances, condition of building, building period. For pipelines pipe tipe (continous or segmented), material, pipe diameter. Very important is to estimate the initial cost of building for assessment of economic losses. From this purpose the attempt was done and the algorithm of this estimation were prepared taking into account obtained the inventory. Build quality, reliability and durability are of special importance to corresponding state agencies and include different aesthetic, engineering, practical, social, technological and economical aspects. The necessity that all of these aspects satisfy existing normative requirements becomes evident as the building and structures come into exploitation

  3. Shaping an Air Force: A Chief’s Perspective

    Science.gov (United States)

    2011-06-01

    from the United States Air Force Academy in 1998. Following a casual status assignment to Moody AFB, Georgia , he graduated from Specialized...military and political science from Duke University in 1970, and taught as an associate professor of history at his alma mater.2 Prior to command

  4. A diffraction correction for storage and loss moduli imaging using radiation force based elastography

    Science.gov (United States)

    Budelli, Eliana; Brum, Javier; Bernal, Miguel; Deffieux, Thomas; Tanter, Mickaël; Lema, Patricia; Negreira, Carlos; Gennisson, Jean-Luc

    2017-01-01

    Noninvasive evaluation of the rheological behavior of soft tissues may provide an important diagnosis tool. Nowadays, available commercial ultrasound systems only provide shear elasticity estimation by shear wave speed assessment under the hypothesis of a purely elastic model. However, to fully characterize the rheological behavior of tissues, given by its storage (G‧) and loss (G″) moduli, it is necessary to estimate both: shear wave speed and shear wave attenuation. Most elastography techniques use the acoustic radiation force to generate shear waves. For this type of source the shear waves are not plane and a diffraction correction is needed to properly estimate the shear wave attenuation. The use of a cylindrical wave approximation to evaluate diffraction has been proposed by other authors before. Here the validity of such approximation is numerically and experimentally revisited. Then, it is used to generate images of G‧ and G″ in heterogeneous viscoelastic mediums. A simulation algorithm based on the anisotropic and viscoelastic Green’s function was used to establish the validity of the cylindrical approximation. Moreover, two experiments were carried out: a transient elastography experiment where plane shear waves were generated using a vibrating plate and a SSI experiment that uses the acoustic radiation force to generate shear waves. For both experiments the shear wave propagation was followed with an ultrafast ultrasound scanner. Then, the shear wave velocity and shear wave attenuation were recovered from the phase and amplitude decay versus distance respectively. In the SSI experiment the cylindrical approximation was applied to correct attenuation due to diffraction effects. The numerical and experimental results validate the use of a cylindrical correction to assess shear wave attenuation. Finally, by applying the cylindrical correction G‧ and G″ images were generated in heterogeneous phantoms and a preliminary in vivo feasibility study

  5. A comparison of innovative air pollution control technology demonstrations at McClellan Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, T.E. [BDM Federal, McClellan AFB, CA (United States); Mook, P.H. Jr.; Wong, K.B. [SM-ALC/EMR, McClellan AFB, CA (United States)

    1997-12-31

    McClellan Air Force Base (AFB), located near Sacramento, California, is one of the Strategic Environmental Research and Development Program`s National Environmental Technology Test Sites. As part of the on-going environmental clean-up of McClellan AFB, the US Air Force has evaluated several innovative and conventional technologies for the treatment of vapor phase volatile organic compounds (VOCs). This paper presents an overview and comparison of the cost and performance of seven innovative technologies tested at McClellan AFB. McClellan AFB has found conventional off-gas treatment technologies to be effective but costly. Operation and maintenance (O and M) costs for treatment systems are increasingly becoming a major component of the environmental clean-up budget. The cost and performance of photolytic destruction, titanium dioxide photocatalytic oxidation, advanced polymer absorption media, flameless thermal oxidation, non-thermal plasma destruction, electron-beam destruction, and an advanced regenerative adsorption system are presented. Destruction removal efficiencies for VOCs have ranged from greater than 99.9 percent for flameless thermal oxidation to zero for the advanced polymer absorption media. Like the conventional technologies in use, all of the innovative technologies tested have been shown to be effective for treating a wide range of vapor phase contaminants, but each is only cost effective over limited range of off-gas concentrations. Some of the innovative technologies evaluated were found not to be useful over a wide range of contaminants or too costly to operate at their current stage of development. For example, titanium dioxide photocatalytic oxidation cannot effectively treat chlorinated VOCs in off-gas streams that contain moderate amounts of long-chain hydrocarbons.

  6. Vandenberg Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Daellenbach, K.K.; Dagle, J.E.; Dittmer, A.L.; Elliott, D.B.; Halverson, M.A.; Hickman, B.J.; Parker, G.B.; Richman, E.E.; Shankle, S.A.

    1993-06-01

    The US Air Force Space Command (SPACECOM) has tasked the Pacific Northwest Laboratory (PNL), as the lead laboratory supporting the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the SPACECOM VAFB facility located approximately 50 miles northwest of Santa Barbara, California. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analysis of EROs are presented in ten common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). In addition, a case study of process loads at Space Launch Complex-4 (SLC-4) is included. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O and M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and value index (VI) of each ERO. Finally, an appendix includes a summary of an economic analysis case study of the South Vandenberg Power Plant (SVPP) operating scenarios.

  7. Vandenberg Air Force Base integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, M.A.; Richman, E.E.; Dagle, J.E.; Hickman, B.J.; Daellenbach, K.K.; Sullivan, G.P.

    1993-06-01

    The US Air Force Space Command has tasked the Pacific Northwest Laboratory, as the lead laboratory supporting the US Department of Energy Federal Energy Management Program, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is a model program PNL is designing for federal customers served by the Pacific Gas and Electric Company (PG and E). The primary goal of the VAFB project is to identify all electric energy efficiency opportunities, and to negotiate with PG and E to acquire those resources through a customized demand-side management program for its federal clients. That customized program should have three major characteristics: (1) 100% up-front financing; (2) substantial utility cost-sharing; and (3) utility implementation through energy service companies under contract to the utility. A similar arrangement will be pursued with Southern California Gas for non-electric resource opportunities if that is deemed desirable by the site and if the gas utility seems open to such an approach. This report documents the assessment of baseline energy use at VAFB located near Lompoc, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Resource Assessment. This analysis examines the characteristics of electric, natural gas, fuel oil, and propane use for fiscal year 1991. It records energy-use intensities for the facilities at VAFB by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A more complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, and applicable losses.

  8. Optical Characterization of Lorentz Force Based CMOS-MEMS Magnetic Field Sensor

    Directory of Open Access Journals (Sweden)

    John Ojur Dennis

    2015-07-01

    Full Text Available Magnetic field sensors are becoming an essential part of everyday life due to the improvements in their sensitivities and resolutions, while at the same time they have become compact, smaller in size and economical. In the work presented herein a Lorentz force based CMOS-MEMS magnetic field sensor is designed, fabricated and optically characterized. The sensor is fabricated by using CMOS thin layers and dry post micromachining is used to release the device structure and finally the sensor chip is packaged in DIP. The sensor consists of a shuttle which is designed to resonate in the lateral direction (first mode of resonance. In the presence of an external magnetic field, the Lorentz force actuates the shuttle in the lateral direction and the amplitude of resonance is measured using an optical method. The differential change in the amplitude of the resonating shuttle shows the strength of the external magnetic field. The resonance frequency of the shuttle is determined to be 8164 Hz experimentally and from the resonance curve, the quality factor and damping ratio are obtained. In an open environment, the quality factor and damping ratio are found to be 51.34 and 0.00973 respectively. The sensitivity of the sensor is determined in static mode to be 0.034 µm/mT when a current of 10 mA passes through the shuttle, while it is found to be higher at resonance with a value of 1.35 µm/mT at 8 mA current. Finally, the resolution of the sensor is found to be 370.37 µT.

  9. Atomic force microscopy based investigations of anti-inflammatory effects in lipopolysaccharide-stimulated macrophages.

    Science.gov (United States)

    Pi, Jiang; Cai, Huaihong; Yang, Fen; Jin, Hua; Liu, Jianxin; Yang, Peihui; Cai, Jiye

    2016-01-01

    A new method based on atomic force microscopy (AFM) was developed to investigate the anti-inflammatory effects of drugs on lipopolysaccharide (LPS)-stimulated RAW264.7 macrophages. The LPS-stimulated RAW264.7 macrophage cell line is a widely used in vitro cell model for the screening of anti-inflammatory drugs or the study of anti-inflammatory mechanisms. In this work, the inhibitory effects of dexamethasone and quercetin on LPS-CD14 receptor binding in RAW264.7 macrophages was probed by LPS-functionalized tips for the first time. Both dexamethasone and quercetin were found to inhibit LPS-induced NO production, iNOS expression, IκBα phosphorylation, and IKKα/β phosphorylation in RAW264.7 macrophages. The morphology and ultrastructure of RAW264.7 macrophages were determined by AFM, which indicated that dexamethasone and quercetin could inhibit LPS-induced cell surface particle size and roughness increase in RAW264.7 macrophages. The binding of LPS and its receptor in RAW264.7 macrophages was determined by LPS-functionalized AFM tips, which demonstrated that the binding force and binding probability between LPS and CD14 receptor on the surface of RAW264.7 macrophages were also inhibited by dexamethasone or quercetin treatment. The obtained results imply that AFM, which is very useful for the investigation of potential targets for anti-inflammatory drugs on native macrophages and the enhancement of our understanding of the anti-inflammatory effects of drugs, is expected to be developed into a promising tool for the study of anti-inflammatory drugs.

  10. An Agent-Based Discrete Collagen Fiber Network Model of Dynamic Traction Force-Induced Remodeling.

    Science.gov (United States)

    Reinhardt, James W; Gooch, Keith

    2017-09-21

    We developed an agent-based model that incorporates repetitively applied traction force within a discrete fiber network to understand how microstructural properties of the network influence mechanical properties and traction force-induced remodeling. An important difference between our model and similar finite-element models is that by implementing more biologically-realistic dynamic traction, we can explore a greater range of matrix remodeling. Here, we validated our model by reproducing qualitative trends observed in three sets of experimental data reported by others: tensile and shear testing of cell-free collagen gels, collagen remodeling around a single isolated cell, and collagen remodeling between pairs of cells. In response to tensile and shear strain, simulated acellular networks exhibited biphasic stress-strain curves indicative of strain-stiffening. Our data support the notion that strain-stiffening might occur as individual fibrils successively align along the axis of strain and become engaged in tension. In simulations with a single, contractile cell, peak collagen displacement occurred closest to the cell and decreased with increasing distance. In simulations with two cells, compaction of collagen between cells appeared inversely related to the initial distance between cells. Further analysis revealed strain energy was relatively uniform around the outer surface of cells separated by 250 microns, but became increasingly non-uniform as the distance between cells decreased. This pattern was partly attributable to the pattern of collagen compaction. These findings are of interest because fibril alignment, density, and strain energy may each contribute to contact guidance during tissue morphogenesis.

  11. Estimating youth locomotion ground reaction forces using an accelerometer-based activity monitor.

    Directory of Open Access Journals (Sweden)

    Jennifer M Neugebauer

    Full Text Available To address a variety of questions pertaining to the interactions between physical activity, musculoskeletal loading and musculoskeletal health/injury/adaptation, simple methods are needed to quantify, outside a laboratory setting, the forces acting on the human body during daily activities. The purpose of this study was to develop a statistically based model to estimate peak vertical ground reaction force (pVGRF during youth gait. 20 girls (10.9 ± 0.9 years and 15 boys (12.5 ± 0.6 years wore a Biotrainer AM over their right hip. Six walking and six running trials were completed after a standard warm-up. Average AM intensity (g and pVGRF (N during stance were determined. Repeated measures mixed effects regression models to estimate pVGRF from Biotrainer activity monitor acceleration in youth (girls 10-12, boys 12-14 years while walking and running were developed. Log transformed pVGRF had a statistically significant relationship with activity monitor acceleration, centered mass, sex (girl, type of locomotion (run, and locomotion type-acceleration interaction controlling for subject as a random effect. A generalized regression model without subject specific random effects was also developed. The average absolute differences between the actual and predicted pVGRF were 5.2% (1.6% standard deviation and 9% (4.2% standard deviation using the mixed and generalized models, respectively. The results of this study support the use of estimating pVGRF from hip acceleration using a mixed model regression equation.

  12. Optical Characterization of Lorentz Force Based CMOS-MEMS Magnetic Field Sensor.

    Science.gov (United States)

    Dennis, John Ojur; Ahmad, Farooq; Khir, M Haris Bin Md; Bin Hamid, Nor Hisham

    2015-07-27

    Magnetic field sensors are becoming an essential part of everyday life due to the improvements in their sensitivities and resolutions, while at the same time they have become compact, smaller in size and economical. In the work presented herein a Lorentz force based CMOS-MEMS magnetic field sensor is designed, fabricated and optically characterized. The sensor is fabricated by using CMOS thin layers and dry post micromachining is used to release the device structure and finally the sensor chip is packaged in DIP. The sensor consists of a shuttle which is designed to resonate in the lateral direction (first mode of resonance). In the presence of an external magnetic field, the Lorentz force actuates the shuttle in the lateral direction and the amplitude of resonance is measured using an optical method. The differential change in the amplitude of the resonating shuttle shows the strength of the external magnetic field. The resonance frequency of the shuttle is determined to be 8164 Hz experimentally and from the resonance curve, the quality factor and damping ratio are obtained. In an open environment, the quality factor and damping ratio are found to be 51.34 and 0.00973 respectively. The sensitivity of the sensor is determined in static mode to be 0.034 µm/mT when a current of 10 mA passes through the shuttle, while it is found to be higher at resonance with a value of 1.35 µm/mT at 8 mA current. Finally, the resolution of the sensor is found to be 370.37 µT.

  13. Vandenberg Air Force Base integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, M.A.; Richman, E.E.; Dagle, J.E.; Hickman, B.J.; Daellenbach, K.K.; Sullivan, G.P.

    1993-06-01

    The US Air Force Space Command has tasked the Pacific Northwest Laboratory, as the lead laboratory supporting the US Department of Energy Federal Energy Management Program, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is a model program PNL is designing for federal customers served by the Pacific Gas and Electric Company (PG and E). The primary goal of the VAFB project is to identify all electric energy efficiency opportunities, and to negotiate with PG and E to acquire those resources through a customized demand-side management program for its federal clients. That customized program should have three major characteristics: (1) 100% up-front financing; (2) substantial utility cost-sharing; and (3) utility implementation through energy service companies under contract to the utility. A similar arrangement will be pursued with Southern California Gas for non-electric resource opportunities if that is deemed desirable by the site and if the gas utility seems open to such an approach. This report documents the assessment of baseline energy use at VAFB located near Lompoc, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Resource Assessment. This analysis examines the characteristics of electric, natural gas, fuel oil, and propane use for fiscal year 1991. It records energy-use intensities for the facilities at VAFB by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A more complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, and applicable losses.

  14. Tectonic architecture of central Georgia Eastern Piedmont

    Energy Technology Data Exchange (ETDEWEB)

    Maher, H.D. Jr.; Brueggemann, M.; Pospisil, M. (Univ. of Nebraska, Omaha, NE (United States). Dept. of Geography and Geology); Boland, I.; Pray, J.; Secor, D.T.; Steinke, T.; West, T. (Univ. of South Carolina, Columbia, SC (United States). Dept. of Geological Sciences); Sacks, P. (Univ. of Minnesota, Duluth, MN (United States). Dept. of Geology)

    1992-01-01

    Recent work suggests the following for the tectonic architecture of the central Georgia Eastern Piedmont. The Alleghenian-age, Modoc fault zone (MZ), first defined in S. Carolina, continues along strike (c. S60W) at least to the Ocmulgee R. (net length = 250 km), where it converges with the Ocmulgee (OF) and Goat Rock (GR) faults. Diverging to the S from the MZ is a sharp contact between migmatitic amphibolites and gneisses of the Sinclair Lake terrane (SLt) and lower grade metapelites and metapsammites of the Milledgeville terrane (Mt). Both are introduced by post-kinematic granites (likely Alleghanian). A previously undescribed, 10 km long ultramafite belt within SLt, the Shoulderbone zone (Sz), is concordantly foliated with respect to surrounding rocks--hence emplacement is considered as pre- or synkinematic. Numerous smaller ultramafite bodies exist within SLt, Metavolcanic rocks N of SLt and the intervening MZ are interpreted as Carolina slate belt (CSB) rocks extending farther SW than often depicted. Arc volcanism and plutonism, terrane amalgamation and subsequent Alleghanian plutonism, dextral shear zones (some with extensional components), and local tight folding contributed to the present architecture. Locally, accretionary wedge material may exist, but the authors find published views and maps describing the entire area as primarily an accretionary wedge thrust stack to be inappropriate.

  15. Georgia Tech Catalog of Gravitational Waveforms

    CERN Document Server

    Jani, Karan; Clark, James A; London, Lionel; Laguna, Pablo; Shoemaker, Deirdre

    2016-01-01

    This paper introduces a catalog of gravitational waveforms from the bank of simulations by the numerical relativity effort at Georgia Tech. Currently, the catalog consists of 452 distinct waveforms from more than 600 binary black hole simulations: 128 of the waveforms are from binaries with black hole spins aligned with the orbital angular momentum, and 324 are from precessing binary black hole systems. The waveforms from binaries with non-spinning black holes have mass-ratios $q = m_1/m_2 \\le 15$, and those with precessing, spinning black holes have $q \\le 8$. The waveforms expand a moderate number of orbits in the late inspiral, the burst during coalescence, and the ring-down of the final black hole. Examples of waveforms in the catalog matched against the widely used approximate models are presented. In addition, predictions of the mass and spin of the final black hole by phenomenological fits are tested against the results from the simulation bank. The role of the catalog in interpreting the GW150914 even...

  16. Reality of Risk of Natural Disasters in Georgia and a Management Policy

    Science.gov (United States)

    Gaprindashvili, George; Tsereteli, Emil; Gobejishvili, Ramin; King, Lorenz; Gaprindashvili, Merab

    2013-04-01

    for tens of years. Moreover, the scientific research institutes of geography, geophysics at several universities and at the Georgian Academy of Sciences have accomplished other significant studies on natural hazards. In Georgia, an increased risk of catastrophes is caused by insufficient information between society and the authorities and persons responsible for mitigation. Urgent research tasks are the basic assessment of natural disasters level, the identification of events, the determination of their cause, and the development of special risk maps in GIS systems. This forms the base for developing a sustainable functioning monitoring and early warning system by the respective authorities.

  17. OCT-based quantification of flow velocity, shear force, and power generated by a biological ciliated surface (Conference Presentation)

    Science.gov (United States)

    Huang, Brendan K.; Khokha, Mustafa K.; Loewenberg, Michael; Choma, Michael A.

    2016-03-01

    In cilia-driven fluid flow physiology, quantification of flow velocity, shearing force, and power dissipation is important in defining abnormal ciliary function. The capacity to generate flow can be robustly described in terms of shearing force. Dissipated power can be related to net ATP consumption by ciliary molecular motors. To date, however, only flow velocity can be routinely quantified in a non-invasive, non-contact manner. Additionally, traditional power-based metrics rely on metabolic consumption that reflects energy consumption not just from cilia but also from all active cellular processes. Here, we demonstrate the estimation of all three of these quantities (flow velocity, shear force, and power dissipation) using only optical coherence tomography (OCT). Specifically, we develop a framework that can extract force and power information from vectorial flow velocity fields obtained using OCT-based methods. We do so by (a) estimating the viscous stress tensor from flow velocity fields to estimate shearing force and (b) using the viscous stress tensor to estimate the power dissipation function to infer total mechanical power. These estimates have the advantage of (a) requiring only a single modality, (b) being non-invasive in nature, and (c) being reflective of only the net power work generated by a ciliated surface. We demonstrate our all-optical approach to the estimation of these parameters in the Xenopus animal model system under normal and increased viscous loading. Our preliminary data support the hypothesis that the Xenopus ciliated surface can increase force output under loading conditions.

  18. eVolv2k: A new ice core-based volcanic forcing reconstruction for the past 2000 years

    Science.gov (United States)

    Toohey, Matthew; Sigl, Michael

    2016-04-01

    Radiative forcing resulting from stratospheric aerosols produced by major volcanic eruptions is a dominant driver of climate variability in the Earth's past. The ability of climate model simulations to accurately recreate past climate is tied directly to the accuracy of the volcanic forcing timeseries used in the simulations. We present here a new volcanic forcing reconstruction, based on newly updated ice core composites from Antarctica and Greenland. Ice core records are translated into stratospheric aerosol properties for use in climate models through the Easy Volcanic Aerosol (EVA) module, which provides an analytic representation of volcanic stratospheric aerosol forcing based on available observations and aerosol model results, prescribing the aerosol's radiative properties and primary modes of spatial and temporal variability. The evolv2k volcanic forcing dataset covers the past 2000 years, and has been provided for use in the Paleo-Modeling Intercomparison Project (PMIP), and VolMIP experiments within CMIP6. Here, we describe the construction of the eVolv2k data set, compare with prior forcing sets, and show initial simulation results.

  19. A free energy-based surface tension force model for simulation of multiphase flows by level-set method

    Science.gov (United States)

    Yuan, H. Z.; Chen, Z.; Shu, C.; Wang, Y.; Niu, X. D.; Shu, S.

    2017-09-01

    In this paper, a free energy-based surface tension force (FESF) model is presented for accurately resolving the surface tension force in numerical simulation of multiphase flows by the level set method. By using the analytical form of order parameter along the normal direction to the interface in the phase-field method and the free energy principle, FESF model offers an explicit and analytical formulation for the surface tension force. The only variable in this formulation is the normal distance to the interface, which can be substituted by the distance function solved by the level set method. On one hand, as compared to conventional continuum surface force (CSF) model in the level set method, FESF model introduces no regularized delta function, due to which it suffers less from numerical diffusions and performs better in mass conservation. On the other hand, as compared to the phase field surface tension force (PFSF) model, the evaluation of surface tension force in FESF model is based on an analytical approach rather than numerical approximations of spatial derivatives. Therefore, better numerical stability and higher accuracy can be expected. Various numerical examples are tested to validate the robustness of the proposed FESF model. It turns out that FESF model performs better than CSF model and PFSF model in terms of accuracy, stability, convergence speed and mass conservation. It is also shown in numerical tests that FESF model can effectively simulate problems with high density/viscosity ratio, high Reynolds number and severe topological interfacial changes.

  20. Passive hybrid force-position control for tele-operation based on real-time simulation of a virtual mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Joly, L.; Andriot, C.

    1995-12-31

    Hybrid force-position control aims at controlling position and force in separate directions. It is particularly useful to perform certain robotic tasks. In tele-operation context, passivity is important because it ensures stability when the system interacts with any passive environment. In this paper, we propose an original approach to hybrid force-position control of a force reflecting tele-robot system. It is based on real-time simulation of a virtual mechanism corresponding to the task. the resulting control law is passive. Experiments on a 6 degrees of freedom tele-operation system consisting in following a bent pipe under several control modes validate the approach. (authors). 12 refs., 6 figs.

  1. CHILDREN AT RISK OF FORCED LABOUR IN BOLIVIA: An analysis based on Child Labour Surveys

    OpenAIRE

    Werner L. Hernani-Limarino

    2010-01-01

    This document presents an attempt to analyze children at risk of forced labour in Bolivia using data from the 2008 Child Labour Survey. Although, survey data does not provide sufficient information to ascertain that a particular group of children are at forced labour, it does provide some information of necessary (but not sufficient) labour conditions that make particular groups of children at risk of forced labour, e.g. being unable to change employer, being unable to keep full salary, or be...

  2. WAVE CURRENT FORCES ON THE PILE GROUP OF BASE FOUNDATION FOR THE EAST SEA BRIDGE, CHINA

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    On the basis of the two structures of the bridge foundation designed for the East Sea Bridge, the wave current forces on four types of oblique piles, the pile group and the single piles at different positions in the pile group considering the effect of the super structures were experimentally investigated. The relationship between the wave current forces and the associated wave parameters, and the comparison of the wave current forces on the pile groups and the single piles were systematically analyzed. The group effectiveness and the reduction coefficient for the wave current forces on the group were examined for engineering design.

  3. The Five Immune Forces Impacting DNA-Based Cancer Immunotherapeutic Strategy

    Directory of Open Access Journals (Sweden)

    Suneetha Amara

    2017-03-01

    Full Text Available DNA-based vaccine strategy is increasingly realized as a viable cancer treatment approach. Strategies to enhance immunogenicity utilizing tumor associated antigens have been investigated in several pre-clinical and clinical studies. The promising outcomes of these studies have suggested that DNA-based vaccines induce potent T-cell effector responses and at the same time cause only minimal side-effects to cancer patients. However, the immune evasive tumor microenvironment is still an important hindrance to a long-term vaccine success. Several options are currently under various stages of study to overcome immune inhibitory effect in tumor microenvironment. Some of these approaches include, but are not limited to, identification of neoantigens, mutanome studies, designing fusion plasmids, vaccine adjuvant modifications, and co-treatment with immune-checkpoint inhibitors. In this review, we follow a Porter’s analysis analogy, otherwise commonly used in business models, to analyze various immune-forces that determine the potential success and sustainable positive outcomes following DNA vaccination using non-viral tumor associated antigens in treatment against cancer.

  4. Statistical Short-Range Guidance for Peak Wind Speed Forecasts at Edwards Air Force Base, CA

    Science.gov (United States)

    Dreher, Joseph G.; Crawford, Winifred; Lafosse, Richard; Hoeth, Brian; Burns, Kerry

    2009-01-01

    The peak winds near the surface are an important forecast element for space shuttle landings. As defined in the Flight Rules (FR), there are peak wind thresholds that cannot be exceeded in order to ensure the safety of the shuttle during landing operations. The National Weather Service Spaceflight Meteorology Group (SMG) is responsible for weather forecasts for all shuttle landings, and is required to issue surface average and 10-minute peak wind speed forecasts. They indicate peak winds are a challenging parameter to forecast. To alleviate the difficulty in making such wind forecasts, the Applied Meteorology Unit (AMU) developed a PC-based graphical user interface (GUI) for displaying peak wind climatology and probabilities of exceeding peak wind thresholds for the Shuttle Landing Facility (SLF) at Kennedy Space Center (KSC; Lambert 2003). However, the shuttle occasionally may land at Edwards Air Force Base (EAFB) in southern California when weather conditions at KSC in Florida are not acceptable, so SMG forecasters requested a similar tool be developed for EAFB.

  5. Effects of trichloroethylene and perchloroethylene on wild rodents at Edwards Air Force Base, California, USA.

    Science.gov (United States)

    Spring, Sarah E; Miles, A Keith; Anderson, Michael J

    2004-09-01

    Effects of inhalation of volatilized trichloroethylene (TCE) or perchloroethylene (PCE) were assessed based on the health and population size of wild, burrowing mammals at Edwards Air Force Base (CA, USA). Organic soil-vapor concentrations were measured at three sites with aquifer contamination of TCE or PCE of 5.5 to 77 mg/L and at two uncontaminated reference sites. Population estimates of kangaroo rats (Dipodomys merriami and D. panamintinus) as well as hematology, blood chemistry, and histopathology of kangaroo rats and deer mice (Peromyscus maniculatus) were compared between contaminated and uncontaminated populations. Maximum soil-gas concentrations associated with groundwater contamination were less than 1.5 microl/L of TCE and 0.07 microl/L of PCE. Population estimates of kangaroo rats were similar at contaminated and reference sites. Hematology, blood chemistry, and histopathology of kangaroo rats and deer mice indicated no evidence of health effects caused by exposure. Trichloroethylene or PCE in groundwater and in related soil gas did not appear to reduce the size of small mammal populations or impair the health of individuals.

  6. An improved visualization-based force-measurement technique for short-duration hypersonic facilities

    Energy Technology Data Exchange (ETDEWEB)

    Laurence, Stuart J.; Karl, Sebastian [Institute of Aerodynamics and Flow Technology, Spacecraft Section, German Aerospace Center (DLR), Goettingen (Germany)

    2010-06-15

    This article is concerned with describing and exploring the limitations of an improved version of a recently proposed visualization-based technique for the measurement of forces and moments in short-duration hypersonic wind tunnels. The technique is based on tracking the motion of a free-flying body over a sequence of high-speed visualizations; while this idea is not new in itself, the use of high-speed digital cinematography combined with a highly accurate least-squares tracking algorithm allows improved results over what have been previously possible with such techniques. The technique precision is estimated through the analysis of artificially constructed and experimental test images, and the resulting error in acceleration measurements is characterized. For wind-tunnel scale models, position measurements to within a few microns are shown to be readily attainable. Image data from two previous experimental studies in the T5 hypervelocity shock tunnel are then reanalyzed with the improved technique: the uncertainty in the mean drag acceleration is shown to be reduced to the order of the flow unsteadiness, 2-3%, and time-resolved acceleration measurements are also shown to be possible. The response time of the technique for the configurations studied is estimated to be {proportional_to}0.5 ms. Comparisons with computations using the DLR TAU code also yield agreement to within the overall experimental uncertainty. Measurement of the pitching moment for blunt geometries still appears challenging, however. (orig.)

  7. An improved visualization-based force-measurement technique for short-duration hypersonic facilities

    Science.gov (United States)

    Laurence, Stuart J.; Karl, Sebastian

    2010-06-01

    This article is concerned with describing and exploring the limitations of an improved version of a recently proposed visualization-based technique for the measurement of forces and moments in short-duration hypersonic wind tunnels. The technique is based on tracking the motion of a free-flying body over a sequence of high-speed visualizations; while this idea is not new in itself, the use of high-speed digital cinematography combined with a highly accurate least-squares tracking algorithm allows improved results over what have been previously possible with such techniques. The technique precision is estimated through the analysis of artificially constructed and experimental test images, and the resulting error in acceleration measurements is characterized. For wind-tunnel scale models, position measurements to within a few microns are shown to be readily attainable. Image data from two previous experimental studies in the T5 hypervelocity shock tunnel are then reanalyzed with the improved technique: the uncertainty in the mean drag acceleration is shown to be reduced to the order of the flow unsteadiness, 2-3%, and time-resolved acceleration measurements are also shown to be possible. The response time of the technique for the configurations studied is estimated to be ˜0.5 ms. Comparisons with computations using the DLR TAU code also yield agreement to within the overall experimental uncertainty. Measurement of the pitching moment for blunt geometries still appears challenging, however.

  8. Structure Optimization of Wheel Force Transducer Based on Natural Frequency and Comprehensive Sensitivity

    Science.gov (United States)

    Zhang, Xiao-Long; Wu, Ti; Shao, Yan; Song, Jian

    2017-07-01

    The current research of wheel force transducer (WFT) mainly focuses on test signal processing and decoupling methods based on signal itself, while the WFT structure optimization research related to decreasing the mass and increase the natural frequency and comprehensive sensitivity is not enough. In order to improve the WFT test accuracy, a structure optimization method based on natural frequency and comprehensive sensitivity indicators is put forward. The WFT with 8-beam elastic body is used for the finite element modeling (FEM), in which the following variations are taken into consideration: the connection type of elastic body with modified rim, the number of connection holes, and the respects of strain beam including the shape, the cross sectional area and the length, etc.. The test results shows that the natural frequency of the connecting block type is increased by 65.5% compared with the connecting seat type of elastic body & modified rim, and the main channel sensitivity is improved as well. The results show that the connecting block type will achieve the best comprehensive performance when the number of connecting holes between the elastic body and the modified rim is 20. And the thinner and longer strain beam with smaller cross section area is preferable within the scope of elastic body mechanical strength. This research proposes a novel structure optimization method for WFT which contributes to improve the measurement performance of WFT.

  9. Evaluating the morphology of erythrocyte population: An approach based on atomic force microscopy and flow cytometry.

    Science.gov (United States)

    Ghosh, Sayari; Chakraborty, Ishita; Chakraborty, Monojit; Mukhopadhyay, Ashis; Mishra, Raghwendra; Sarkar, Debasish

    2016-04-01

    Erythrocyte morphology is gaining importance as a powerful pathological index in identifying the severity of any blood related disease. However, the existing technique of quantitative microscopy is highly time consuming and prone to personalized bias. On the other hand, relatively unexplored, complementary technique based on flow cytometry has not been standardized till date, particularly due to the lack of a proper morphological scoring scale. In this article, we have presented a new approach to formulate a non-empirical scoring scale based on membrane roughness (R(rms)) data obtained from atomic force microscopy. Subsequently, the respective morphological quantifier of the whole erythrocyte population, commonly known as morphological index, was expressed as a function of highest correlated statistical parameters of scattered signal profiles generated by flow cytometry. Feed forward artificial neural network model with multilayer perceptron architecture was used to develop the intended functional form. High correlation coefficient (R(2) = 0.95), even for model-formulation exclusive samples, clearly indicates the universal validity of the proposed model. Moreover, a direct pathological application of the proposed model has been illustrated in relation to patients, diagnosed to be suffering from a wide variety of cancer.

  10. Low-Temperature Magnetic Force Microscopy on Single Molecule Magnet-Based Microarrays.

    Science.gov (United States)

    Serri, Michele; Mannini, Matteo; Poggini, Lorenzo; Vélez-Fort, Emilio; Cortigiani, Brunetto; Sainctavit, Philippe; Rovai, Donella; Caneschi, Andrea; Sessoli, Roberta

    2017-03-08

    The magnetic properties of some single molecule magnets (SMM) on surfaces can be strongly modified by the molecular packing in nanometric films/aggregates or by interactions with the substrate, which affect the molecular orientation and geometry. Detailed investigations of the magnetism of thin SMM films and nanostructures are necessary for the development of spin-based molecular devices, however this task is challenged by the limited sensitivity of laboratory-based magnetometric techniques and often requires access to synchrotron light sources to perform surface sensitive X-ray magnetic circular dichroism (XMCD) investigations. Here we show that low-temperature magnetic force microscopy is an alternative powerful laboratory tool able to extract the field dependence of the magnetization and to identify areas of in-plane and perpendicular magnetic anisotropy in microarrays of the SMM terbium(III) bis-phthalocyaninato (TbPc2) neutral complex grown as nanosized films on SiO2 and perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA), and this is in agreement with data extracted from nonlocal XMCD measurements performed on homogeneous TbPc2/PTCDA films.

  11. Analysis of Urban Expansion and Driving Forces in Xuzhou City Based on Remote Sensing

    Institute of Scientific and Technical Information of China (English)

    HU Zhao-ling; DU Pei-jun; GUO Da-zhi

    2007-01-01

    Based on satellite remote sensing TM/ETM+ images of Xuzhou city, land use forms of the city in 1987, 1994 and 2000 were extracted by using a neural network classification method. The expansion contribution rate and annual expansion intensity index of each administrative district have been calculated and the contribution rate matrices and spatial distribution maps of land use changes were obtained. Based on the above analysis, the characteristics of urban expansion from 1987 to 2000 have been explored. From 1987 to 1994, the expansion contribution rate of Quanshan district reached 46.80%, the highest in all administrative districts of Xuzhou city; Tongshan town was in a high-speed expansion period; both Quanshan and Yunlong districts were experiencing fast-speed expansion periods while the entire city was expanding at a medium-speed with an annual expansion intensity index of 0.98; the city spread eastwards and southwards. From 1994 to 2000, the expansion contribution rate of Quanshan district reached 43.67%, the highest in Xuzhou; the entire city was in a medium-speed expansion period with an annual expansion intensity index of 1.04; the city has rapidly been extended towards the southeast. According to the contribution rate matrices of land use changes, urban expansion mainly usurps cropland and woodland. A quantitative analysis found that population growth, industrialization and economic development are the primary driving forces behind urban expansion.

  12. Cantilevered bimorph-based scanner for high speed atomic force microscopy with large scanning range.

    Science.gov (United States)

    Zhou, Yusheng; Shang, Guangyi; Cai, Wei; Yao, Jun-en

    2010-05-01

    A cantilevered bimorph-based resonance-mode scanner for high speed atomic force microscope (AFM) imaging is presented. The free end of the bimorph is used for mounting a sample stage and the other one of that is fixed on the top of a conventional single tube scanner. High speed scanning is realized with the bimorph-based scanner vibrating at resonant frequency driven by a sine wave voltage applied to one piezolayer of the bimorph, while slow scanning is performed by the tube scanner. The other piezolayer provides information on vibration amplitude and phase of the bimorph itself simultaneously, which is used for real-time data processing and image calibration. By adjusting the free length of the bimorph, the line scan rate can be preset ranging from several hundred hertz to several kilohertz, which would be beneficial for the observation of samples with different properties. Combined with a home-made AFM system and a commercially available data acquisition card, AFM images of various samples have been obtained, and as an example, images of the silicon grating taken at a line rate of 1.5 kHz with the scan size of 20 microm are given. By manually moving the sample of polished Al foil surface while scanning, the capability of dynamic imaging is demonstrated.

  13. Survey of intersex largemouth bass from impoundments in Georgia USA

    Science.gov (United States)

    Kellock, Kristen A.; Trushel, Brittany E.; Ely, Patrick C.; Jennings, Cecil A.; Bringolf, Robert B.

    2015-01-01

    Intersex fish are increasingly being reported worldwide, primarily in rivers that receive treated wastewater, but few studies have investigated intersex in waters that do not receive wastewater. In a recent reconnaissance survey of intersex fish in North America, a high rate of intersex was reported for Largemouth Bass Micropterus salmoides in some southeastern U.S. rivers; however, the occurrence of intersex in impoundments has not been well described, especially on a statewide scale. Therefore, our objective for this project was to survey the occurrence of intersex Largemouth Bass in a variety of impoundment habitats across Georgia. Largemouth Bass were collected from 11 impoundments without direct municipal or agricultural wastewater inputs. Gonads from all male Largemouth Bass were evaluated for the incidence and severity of the intersex condition based on presence and arrangement of testicular oocytes. Overall 48% of male Largemouth Bass collected from impoundments were intersex, which was found in 9 of the 11 impoundments. Among impoundments, incidence of intersex ranged from 0 to 82% of the males sampled and surface area of the impoundment was a significant predictor of intersex incidence. Intersex fish were smaller than normal males, but population-level effects of intersex and causative factors of endocrine disruption in the impoundments remain unknown. The high incidence of intersex males in small impoundments demonstrates that the condition is not confined to rivers and suggests that factors other than those previously associated with intersex (i.e., municipal wastewater) may be involved.

  14. Energy conserving site design case study: Shenandoah, Georgia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as a passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)

  15. Source evaluation report phase 2 investigation: Limited field investigation. Final report: United States Air Force Environmental Restoration Program, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    This report describes the limited field investigation work done to address issues and answer unresolved questions regarding a collection of potential contaminant sources at Eielson Air Force Base (AFB), near Fairbanks, Alaska. These sources were listed in the Eielson AFB Federal Facility Agreement supporting the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) cleanup of the base. The limited field investigation began in 1993 to resolve all remaining technical issues and provide the data and analysis required to evaluate the environmental hazard associated with these sites. The objective of the limited field investigation was to allow the remedial project managers to sort each site into one of three categories: requiring remedial investigation/feasibility study, requiring interim removal action, or requiring no further remedial action.

  16. 78 FR 28633 - Georgia Pacific LLC, Also Doing Business as Duluth Hardboard Plant, Specialty Manufacturing...

    Science.gov (United States)

    2013-05-15

    ... Employment and Training Administration Georgia Pacific LLC, Also Doing Business as Duluth Hardboard Plant..., applicable to workers of Georgia Pacific, LLC, also doing business as Duluth Hardboard Plant, Specialty...-W-82,035 is hereby issued as follows: All workers of Georgia Pacific, LLC, also doing business...

  17. 40 CFR 81.114 - Augusta (Georgia)-Aiken (South Carolina) Interstate Air Quality Control Region.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Augusta (Georgia)-Aiken (South... PLANNING PURPOSES Designation of Air Quality Control Regions § 81.114 Augusta (Georgia)-Aiken (South Carolina) Interstate Air Quality Control Region. The Augusta (Georgia)-Aiken (South Carolina) Interstate...

  18. A multi-scale continuum model of skeletal muscle mechanics predicting force enhancement based on actin-titin interaction.

    Science.gov (United States)

    Heidlauf, Thomas; Klotz, Thomas; Rode, Christian; Altan, Ekin; Bleiler, Christian; Siebert, Tobias; Röhrle, Oliver

    2016-12-01

    Although recent research emphasises the possible role of titin in skeletal muscle force enhancement, this property is commonly ignored in current computational models. This work presents the first biophysically based continuum-mechanical model of skeletal muscle that considers, in addition to actin-myosin interactions, force enhancement based on actin-titin interactions. During activation, titin attaches to actin filaments, which results in a significant reduction in titin's free molecular spring length and therefore results in increased titin forces during a subsequent stretch. The mechanical behaviour of titin is included on the microscopic half-sarcomere level of a multi-scale chemo-electro-mechanical muscle model, which is based on the classic sliding-filament and cross-bridge theories. In addition to titin stress contributions in the muscle fibre direction, the continuum-mechanical constitutive relation accounts for geometrically motivated, titin-induced stresses acting in the muscle's cross-fibre directions. Representative simulations of active stretches under maximal and submaximal activation levels predict realistic magnitudes of force enhancement in fibre direction. For example, stretching the model by 20 % from optimal length increased the isometric force at the target length by about 30 %. Predicted titin-induced stresses in the muscle's cross-fibre directions are rather insignificant. Including the presented development in future continuum-mechanical models of muscle function in dynamic situations will lead to more accurate model predictions during and after lengthening contractions.

  19. Normal and friction stabilization techniques for interactive rigid body constraint-based contact force computations

    DEFF Research Database (Denmark)

    2010-01-01

    We present a novel, yet simple, method for stabilization of normal forces. A normal stabilization term, carefully designed from hypotheses about interactive usability, is added to the contact force problem. Further, we propose friction stabilization as a completely new stabilization paradigm in i...

  20. WRIST FORCE SENSOR'S DYNAMIC PERFORMANCE CALIBRATION BASED ON NEGATIVE STEP RESPONSE

    Institute of Scientific and Technical Information of China (English)

    ZHENG Hongmei

    2008-01-01

    Negative step response experimental method is used in wrist force sensor's dynamic performance calibration. The exciting manner of negative step response method is the same as wrist force sensor's load in working. This experimental method needn't special experiment equipments. Experiment's dynamic repeatability is good. So wrist force sensor's dynamic performance is suitable to be calibrated by negative step response method. A new correlation wavelet transfer method is studied. By wavelet transfer method, the signal is decomposed into two dimensional spaces of time-frequency. So the problem of negative step exciting energy concentrating in the low frequency band is solved. Correlation wavelet transfer doesn't require that wavelet primary function be orthogonal and needn't wavelet reconstruction. So analyzing efficiency is high. An experimental bench is designed and manufactured to load the wrist force sensor orthogonal excitation force/moment. A piezoelectric force sensor is used to setup soft trigger and calculate the value of negative step excitation. A wrist force sensor is calibrated. The pulse response function is calculated after negative step excitation and step response have been transformed to positive step excitation and step response. The pulse response function is transferred to frequency response function. The wrist force sensor's dynamic characteristics are identified by the frequency response function.