WorldWideScience

Sample records for food technological research

  1. Electron accelerator technology research in food irradiation

    International Nuclear Information System (INIS)

    Jin Jianqiao; Ye Mingyang; Zhang Yue; Yang Bin; Xu Tao; Kong Xiangshan

    2014-01-01

    Electronic accelerator was applied to instead of cobalt sources for food irradiation, to keep food quality and to improve the effect of the treatment. Appropriate accelerator parameters lead to optimal technique. The irradiation effect is associated with the relationship between uniformity and irradiating speed, the effect of cargo size on radiation penetration, as well as other factors that affect the irradiation effects. Industrialization of electron accelerator irradiation will be looked to the future. (authors)

  2. Egypt's policy concerning food irradiation research and technology

    International Nuclear Information System (INIS)

    Roushdy, H.M.

    1978-01-01

    The paper reviews current research in Egypt in the field of radiation preservation of food to accumulate the necessary data for drafting Egypts' policy towards prospects for application. Research activities in Egypt have been oriented to solving problems of local economic importance, e.g. inhibition of sprouting in potatoes, onions and garlic, extension of shelf-life of vegetables and fruits, disinfestation of stored grains and grain products, preservation of meat, meat products, fish, fats and oils, and elimination of parasites and microorganisms from animal feed. Extensive studies have been performed to determine the lowest radiation level required for short-term storage, changes in organoleptic, physical, chemical and microbiological values of irradiated food and wholesomeness studies to give evidence of the safety of irradiated food for human consumption. The paper summarizes Egypt's national planning for the transfer of such new technology, the establishment of the National Centre for Radiation Research and Technology to build up the national infrastructure for food irradiation research and application, and the formation of a Supreme Committee for Radiation Preservation of Food. Finally, the paper also surveys the locally available irradiators and correlates the design, capacity and capital cost against the actual needs of Egypt and the experience acquired. (author)

  3. Researches and commercialization of food irradiation technology in China

    International Nuclear Information System (INIS)

    Gao Meixu; Ha Yiming; Chen Hao; Liu Chunquan; Chen Xiulan

    2007-01-01

    The status of food irradiation on research, standard and commercialization is described in the paper. The main research fields now include degradation of chloramphenicol residue by irradiation, promoting safety of meat products, frozen seafood and ready-to-eat products by irradiation, lower activity of allergic protein by irradiation, identification of irradiated food and irradiation as a phytosanitary treatment. The existed standards need to be revised, and new standard need to be established. The commercialization stages of food irradiation and quality assurance system of irradiation company are also analyzed. (authors)

  4. A food quality management research methodology integrating technological and managerial theories

    NARCIS (Netherlands)

    Luning, P.A.; Marcelis, W.J.

    2009-01-01

    In this article it is argued how the complexity of food quality management combined with the high requirements on food quality requires a specific research methodology. It is concluded that food quality management research has to deal with two quite different paradigms, the one from technological

  5. Integrating Aspects of Working Environment into a National Research and Development Programme on Food Technology

    DEFF Research Database (Denmark)

    Broberg, Ole; Hansen, Iben Posniak

    2001-01-01

    In a Danish national research and development program on food technology, it was made a condition that funded projects consider potential working environment impacts. The present study evaluated these projects and concluded that this condition failed to have any significant effect on outcomes...... of working environment and food science and technology........ The reasons for this failure are explained by the social construction of the program and the fact that it neglected to consider the sociocultural dynamics within scientific and technological work. The program neither constructed useful boundary objects nor included actors that could link the social worlds...

  6. [Research progress of Terahertz wave technology in quality measurement of food and agricultural products].

    Science.gov (United States)

    Yan, Zhan-Ke; Zhang, Hong-Jian; Ying, Yi-Bin

    2007-11-01

    The quality concern of food and agricultural products has become more and more significant. The related technologies for nondestructive measurement or quality control of food products have been the focus of many researches. Terahertz (THz) radiation, or THz wave, the least explored region of the spectrum, is the electromagnetic wave that lies between mid-infrared and microwave radiation, which has very important research and application values. THz spectroscopy and THz imaging technique are the two main applications of THz wave. During the past decade, THz waves have been used to characterize the electronic, vibrational and compositional properties of solid, liquid and gas phase materials. Recently, THz technology has gained a lot of attention of researchers in various fields from biological spectral analysis to bio-medical imaging due to its unique features compared with microwave and optical waves. In the present paper, the properties of THz wave and its uniqueness in sensing and imaging applications were discussed. The most recent researches on THz technology used in food quality control and agricultural products inspection were summarized. The prospect of this novel technology in agriculture and food industry was also discussed.

  7. Food traceability systems in China: The current status of and future perspectives on food supply chain databases, legal support, and technological research and support for food safety regulation.

    Science.gov (United States)

    Tang, Qi; Li, Jiajia; Sun, Mei; Lv, Jun; Gai, Ruoyan; Mei, Lin; Xu, Lingzhong

    2015-02-01

    Over the past few decades, the field of food security has witnessed numerous problems and incidents that have garnered public attention. Given this serious situation, the food traceability system (FTS) has become part of the expanding food safety continuum to reduce the risk of food safety problems. This article reviews a great deal of the related literature and results from previous studies of FTS to corroborate this contention. This article describes the development and benefits of FTS in developed countries like the United States of America (USA), Japan, and some European countries. Problems with existing FTS in China are noted, including a lack of a complete database, inadequate laws and regulations, and lagging technological research into FTS. This article puts forward several suggestions for the future, including improvement of information websites, clarification of regulatory responsibilities, and promotion of technological research.

  8. From chemicals to cold plasma: Non-thermal food processing technologies research at the USDA's Eastern Regional Research Center

    Science.gov (United States)

    Foodborne pathogens cause millions of illnesses every year. At the US Department of Agriculture’s Eastern Regional Research Center, scientists and engineers have focused on developing new ways to improve food safety and shelf life while retaining quality and nutritional value. A variety of technolog...

  9. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its influ...

  10. Food irradiation technology

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    1999-01-01

    Trade in food and agricultural products is important to all countries, the economies of many developing countries would be significantly improved if they were able to export more food and agricultural products. Unfortunately, many products can not be traded because they are infested with, or hosts to, harmful pests, contaminated with microorganisms, or spoil quickly. Foods contaminated with microorganisms cause economic losses, widespread illness and death. Several technologies and products have been developed to resolve problems in trading food and to improve food safety, but none can provide all the solutions. Irradiation is an effective technology to resolve technical problems in trade of many food and agricultural products, either as a stand- alone technology or in combination with others. As a disinfestation treatment it allows different levels of quarantine security to be targeted and it is one of few methods to control internal pests. The ability of irradiation virtually to eliminate key pathogenic organisms from meat, poultry, and spices is an important public health advantage. In addition to controlling pests and eliminating harmful bacteria, irradiation also extends the storage life of many foods. In the laboratories of Turkish Atomic Energy Authority, many research projects were completed on the effects of gamma irradiation to the storage life of chicken meat, anchovy, Turkish fermented sausage, dried and fresh fruits and vegetables and also research projects were conducted on the effects of gamma irradiation on microorganisms (Salmonella, Campylo-bacteria, E.coli and S.aureus in white and red meat) and parasites (food-borne, trichostrongylus spp. and Nematodes spp.)

  11. A methodology to promote business development from research outcomes in food science and technology

    Directory of Open Access Journals (Sweden)

    Eduardo L. Cardoso

    2015-04-01

    Full Text Available Valorization of knowledge produced in research units has been a major challenge for research universities in contemporary societies. The prevailing forces have led these institutions to develop a “third mission”, the facilitation of technology transfer and activity in an entrepreneurial paradigm. Effective management of challenges encountered in the development of academic entrepreneurship and the associated valorization of knowledge produced by universities are major factors to bridge the gap between research and innovation in Europe.The need to improve the existing institutional knowledge valorization processes, concerning entrepreneurship and business development and the processes required were discussed.A case study was designed to describe the institutional knowledge valorization process in a food science and technology research unit and a related incubator, during a five year evaluation period that ended in 2012.The knowledge valorization processes benefited from the adoption of a structured framework methodology that led to ideas and teams from a business model generation to client development, in parallel, when possible, with an agile product/service development.Although academic entrepreneurship engagement could be improved, this case study demonstrated that stronger skills development was needed to enable the researcher to be more aware of business development fundamentals and therefore contribute to research decisions and the valorisation of individual and institutional knowledge assets. It was noted that the timing for involvement of companies in the research projects or programs varied with the nature of the research.

  12. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its...... influence on food ethics. Post-phenomenology and the idea of a technologically mediated morality are central theoretical approaches. Four elements are included in the analytical framework: perception, interpretation, intentionality, and mediated morality. The framework is applied to two cases; food safety...

  13. Research on Food Safety Traceability Technology Based on Internet of Things

    OpenAIRE

    Qiang Meng; Yongfeng Cui; Hansen Wang; Shijun Li

    2015-01-01

    Relying on the Internet of things platform, building a traceability system ranging from the source to dinner table is the crucial issue of meat products to be solved at the moment. On the basis of knowing the current situation of domestic and international food traceability quo, the passage will put forward the feasibility of mobile query used in food traceability queries, mainly targeting elaborating the core technology like image preprocessing and decoding. It illustrates the feasibility of...

  14. An art report to analyze research status for the establishment of the space food development and future food system using the advanced food technology

    International Nuclear Information System (INIS)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun

    2006-12-01

    The quality of food for the astronaut accomplishing the mission in the space is one of the most important matters, and it is time to study and develop Korean space food for the Korean astronaut in the space. Therefore, in the beginning of the space exploration era, it is necessary to establish a national long-term plan and study and develop Korean space food in order to provide food with better quality for the astronaut accomplishing the space mission. Using current food processing, preservation, and packaging technology, it is necessary to develop the Korean space food, provide Korean astronaut studying at the international space station, and study the future space food systems used for the long-term space voyage and planet habitat base in the era of space exploration. Space food is analyzed through nutritional analysis, sensory evaluation, storage studies, packaging evaluations, and many other methods before its final shipment on the space shuttle. Each technology developed for the advanced food system must provide the required attribute to the food system, including safety, nutrition, and acceptability. It is anticipated that the duration of the exploration class missions can be at least 2, 3 years, and one of the biggest challenges for these missions will be to provide acceptable food with a shelf-life of 3-5 years. The development of space food process/preservation technology and its ripple effect will make a contribution to the improvement of nation's international phase, and the developed space food will potentially be used for combat ration and emergency/special food like the U. S. A. In the 21th century of space exploration era, the development of the advanced food system and life support system in the Mars space base as well as the space shuttle will strengthen the capability to precede the future space exploration era

  15. An art report to analyze research status for the establishment of the space food development and future food system using the advanced food technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun [KAERI, Daejeon (Korea, Republic of)

    2006-12-15

    The quality of food for the astronaut accomplishing the mission in the space is one of the most important matters, and it is time to study and develop Korean space food for the Korean astronaut in the space. Therefore, in the beginning of the space exploration era, it is necessary to establish a national long-term plan and study and develop Korean space food in order to provide food with better quality for the astronaut accomplishing the space mission. Using current food processing, preservation, and packaging technology, it is necessary to develop the Korean space food, provide Korean astronaut studying at the international space station, and study the future space food systems used for the long-term space voyage and planet habitat base in the era of space exploration. Space food is analyzed through nutritional analysis, sensory evaluation, storage studies, packaging evaluations, and many other methods before its final shipment on the space shuttle. Each technology developed for the advanced food system must provide the required attribute to the food system, including safety, nutrition, and acceptability. It is anticipated that the duration of the exploration class missions can be at least 2, 3 years, and one of the biggest challenges for these missions will be to provide acceptable food with a shelf-life of 3-5 years. The development of space food process/preservation technology and its ripple effect will make a contribution to the improvement of nation's international phase, and the developed space food will potentially be used for combat ration and emergency/special food like the U. S. A. In the 21th century of space exploration era, the development of the advanced food system and life support system in the Mars space base as well as the space shuttle will strengthen the capability to precede the future space exploration era

  16. Food technology in space habitats

    Science.gov (United States)

    Karel, M.

    1979-01-01

    The research required to develop a system that will provide for acceptable, nutritious, and safe diets for man during extended space missions is discussed. The development of a food technology system for space habitats capable of converting raw materials produced in the space habitats into acceptable food is examined.

  17. Active food packaging technologies.

    Science.gov (United States)

    Ozdemir, Murat; Floros, John D

    2004-01-01

    Active packaging technologies offer new opportunities for the food industry, in the preservation of foods. Important active packaging systems currently known to date, including oxygen scavengers, carbon dioxide emitters/absorbers, moisture absorbers, ethylene absorbers, ethanol emitters, flavor releasing/absorbing systems, time-temperature indicators, and antimicrobial containing films, are reviewed. The principle of operation of each active system is briefly explained. Recent technological advances in active packaging are discussed, and food related applications are presented. The effects of active packaging systems on food quality and safety are cited.

  18. Food irradiation: an alternative technology

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P

    1986-12-31

    History has shown that man has continued to search for methods to protect his food from various spoilage agents. Traditional methods of food preservation such as drying, salting, fermentation, have been known for centuries and are being practised even today. Within the past century, modern technologies such as canning, freezing, refrigeration, the use of preservatives and pesticides, have further equipped man with an arsenal of methods to combat food losses and to increase the quantity, quality and safety of our food supplies. The most recent technology, irradiation, has gone through a great deal of research and development in the past 40 years and has shown a strong potential as another method for food preservation. As irradiation is still not familiar to the public at large, this paper attempts to inform scientists, officials, representatives of the food industry, and consumers of the global situation of the safety, benefits and applications of food irradiation by answering common questions often asked about the technology today. Special emphasis will be placed on the possible contribution of food irradiation to ASEAN

  19. Food irradiation: an alternative technology

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1985-01-01

    History has shown that man has continued to search for methods to protect his food from various spoilage agents. Traditional methods of food preservation such as drying, salting, fermentation, have been known for centuries and are being practised even today. Within the past century, modern technologies such as canning, freezing, refrigeration, the use of preservatives and pesticides, have further equipped man with an arsenal of methods to combat food losses and to increase the quantity, quality and safety of our food supplies. The most recent technology, irradiation, has gone through a great deal of research and development in the past 40 years and has shown a strong potential as another method for food preservation. As irradiation is still not familiar to the public at large, this paper attempts to inform scientists, officials, representatives of the food industry, and consumers of the global situation of the safety, benefits and applications of food irradiation by answering common questions often asked about the technology today. Special emphasis will be placed on the possible contribution of food irradiation to ASEAN

  20. Research and Technology Development to Advance Environmental Monitoring, Food Systems, and Habitat Design for Exploration Beyond Low Earth Orbit

    Science.gov (United States)

    Sullivan, Thomas A.; Perchonek, M. H.; Ott, C. M.; Kaiser, M. K.

    2011-01-01

    Exploration missions will carry crews far beyond the relatively safe environs of cis-lunar space. Such trips will have little or no opportunity for resupply or rapid aborts and will be of a duration that far exceeds our experience to date. The challenges this imposes on the requirements of systems that monitor the life support and provide food and shelter for the crew are the focus of much research within the Human Research Program. Making all of these technologies robust and reliable enough for multi-year missions with little or no ability to run for home calls for a thorough understanding of the risks and impacts of failure. The way we currently monitor for microbial contamination of water, air, and surfaces, by sampling and growing cultures on nutrient media, must be reconsidered for exploration missions which have limited capacity for consumables. Likewise, the shelf life of food must be increased so that the nutrients required to keep the crewmembers healthy do not degrade over the life of the mission. Improved formulations, preservation, packaging, and storage technologies are all being investigated for ways slow this process or replace stowed food with key food items grown fresh in situ. Ensuring that the mass and volume of a spacecraft are used to maximum efficiency calls for infusing human factors into the design from its inception to increase efficiency, improve performance, and retain robustness toward operational realities. Integrating the human system with the spacecraft systems is the focus of many lines of investigation.

  1. Utilization of Microcapsule Technology in Foods.

    Science.gov (United States)

    Zhang, Chuanxiang; Li, Xiaolong; Liu, You-Nian; Zhang, Fengqin

    2015-12-01

    Microencapsulation technology has greatly accelerated the development of food industry and has a bright future for further applications. In this review paper, we introduce the current researches, latest advances and trends of core materials, wall materials, microencapsulation technology, as well as the encapsulation of food additives, bioactive substance, esculent oils, probiotics and other substances, and their application in food industry.

  2. Technology of food preservation by irradiation

    International Nuclear Information System (INIS)

    Thomas, Paul

    1997-01-01

    Food Technology Division, Bhabha Atomic Research Centre, Mumbai has demonstrated that radiation processing of foods can contribute to nations food security by reducing post-harvest losses caused by insect infestation, microbial-spoilage and physiological changes. The technology has commercial potential for the conservation of cereals, pulses and their products, spices, onions, potatoes, garlic, some tropical fruits, sea foods, meat and poultry. Irradiation can ensure hygienic quality in foods including frozen foods by eliminating food borne pathogens and parasitic organisms. It offers a viable environment friendly alternative to chemical fumigants for quarantine treatment against insect pests in agricultural and horticultural products entering international trade. The safety and nutritional adequacy of irradiated foods for human consumption is well established. About 40 countries including India have regulations permitting irradiation of foods and 28 countries are irradiating foods for processing industries and institutional catering

  3. Journal of Food Technology in Africa

    African Journals Online (AJOL)

    AJOL believes this journal has ceased publication. The Journal of Food Technology in Africa is Published Quarterly. It is intended for publication of papers on original work and reviews of all aspects of Food Science, Technology and Nutrition. Articles should be basic research that impinge on major areas of concern and ...

  4. Alternative food safety intervention technologies

    Science.gov (United States)

    Alternative nonthermal and thermal food safety interventions are gaining acceptance by the food processing industry and consumers. These technologies include high pressure processing, ultraviolet and pulsed light, ionizing radiation, pulsed and radiofrequency electric fields, cold atmospheric plasm...

  5. ULTRAVIOLET TECHNOLOGY FOR FOOD PRESERVATION

    OpenAIRE

    Guedes, AMM; Novello, D; Mendes, GMD; Cristianini, M

    2009-01-01

    ULTRAVIOLET TECHNOLOGY FOR FOOD PRESERVATION This literature review article had as objective to gather information about ultraviolet (UV) technology utilization on the food industry, its effects and potential application. Aspects as the origin, concept and applications of the technology on the equipment industry and running mechanisms were approached. The application of UV radiation on food decontamination is still little used due its low penetration, but it is known that it can be easily app...

  6. Development of Food Preservation and Processing Technologies by Radiation Technology

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun

    2007-07-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  7. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun [and others

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  8. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  9. Evaluative conditioning of food technologies

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2015-01-01

    Consumer attitudes play an important role in the acceptance of new technologies. The success of food innovations depends on understanding how consumers form and change attitudes toward food technologies. Earlier post hoc explanations suggest that evaluative conditioning can change consumer...... attitudes toward food technologies. The present study tests how evaluative conditioning can affect consumer acceptance of new food technologies. Furthermore, authors investigate whether evaluative conditioning is resistant to extinction after a two-month period and whether the evaluative conditioning effect...... prevails in a product-related context. Within an evaluative conditioning paradigm including between-subjects control groups in addition to standard within-subjects control conditions, participants were presented with three food technologies (conventional, enzyme, and genetic technology) paired...

  10. Environment, energy, and world food resources. New challenges to research and technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Stever, H G [National Science Foundation, Washington, D.C. (USA)

    1976-07-01

    If one tried to decide upon one single urgent task, a challenge for the natural sciences and technology alike, one probably would have to name the following: promotion of sound and appropriate economic growth by means of more effective and efficient utilization of resources; i.e., energy and natural resources of all kinds (whether these may be renewable or not), the process to be carried out by means that show as much concern for the environment as possible.

  11. Introduction of a novel food processing technology- food irradiation

    International Nuclear Information System (INIS)

    Nair, P.M.

    1994-01-01

    The treatment of food with ionizing radiation for its preservation is a resurging technology which was lying dormant since its introduction after the discovery on the use of x-ray as an effective way to kill bacteria in food. Large research programmes were initiated on the use of gamma rays for food preservation in many countries and some of the conclusions derived are discussed. 1 fig., 2 tabs

  12. Apollo food technology

    Science.gov (United States)

    Smith, M. C., Jr.; Heidelbaugh, N. D.; Rambaut, P. C.; Rapp, R. M.; Wheeler, H. O.; Huber, C. S.; Bourland, C. T.

    1975-01-01

    Large improvements and advances in space food systems achieved during the Apollo food program are discussed. Modifications of the Apollo food system were directed primarily toward improving delivery of adequate nutrition to the astronaut. Individual food items and flight menus were modified as nutritional countermeasures to the effects of weightlessness. Unique food items were developed, including some that provided nutritional completeness, high acceptability, and ready-to-eat, shelf-stable convenience. Specialized food packages were also developed. The Apollo program experience clearly showed that future space food systems will require well-directed efforts to achieve the optimum potential of food systems in support of the physiological and psychological well-being of astronauts and crews.

  13. Technologies for enhancement of bioactive components and potential health benefits of cereal and cereal-based foods: Research advances and application challenges.

    Science.gov (United States)

    Saleh, Ahmed S M; Wang, Peng; Wang, Na; Yang, Shu; Xiao, Zhigang

    2017-08-28

    Cereal grains are a major source of human food and their production has steadily been increased during the last several decades to meet the demand of our increasing world population. The modernized society and the expansion of the cereal food industry created a need for highly efficient processing technologies, especially flour production. Earlier scientific research efforts have led to the invention of the modern steel roller mill, and the refined flour of wheat has become a basic component in most of cereal-based foods such as breads and pastries because of the unique functionality of wheat protein. On the other hand, epidemiological studies have found that consumption of whole cereal grains was health beneficial. The health benefit of whole cereal grain is attributed to the combined effects of micronutrients, phytochemicals, and dietary fibre, which are mainly located in the outer bran layer and the germ. However, the removal of bran and germ from cereal grains during polishing and milling results in refined flour and food products with lower bioactive compounds and dietary fibre contents than those from whole grain. Also, the level of bioactive compounds in cereal food is influenced by other food preparation procedures such as baking, cooking, extrusion, and puffing. Therefore, food scientists and nutritionists are searching for strategies and processing technologies to enhance the content and bioavailability of nutrients, bioactive compounds, and dietary fibre of cereal foods. The objective of this article was to review the research advances on technologies for the enhancement of bioactive compounds and dietary fibre contents of cereal and cereal-based foods. Bioactivities or biological effects of enhanced cereal and cereal-based foods are presented. Challenges facing the application of the proposed technologies in the food industry are also discussed.

  14. Ergonomics in a national research and development programme for food technology

    DEFF Research Database (Denmark)

    Broberg, Ole; Hansen, Iben Posniak

    1997-01-01

    The research question for the study presented in this paper was: What are the opportunities and barriers for integrating ergonomics aspects into joint projects sponsored by the FOETEK programme? The objectives were (i) to evaluate the outcome of this clause of accounting for ergonomics impacts......, and (ii) to put forward recommendations for improving the integration of ergonomics into joint projects sponsored by the FOETEK programme. A survey based on a questionnaire was conducted among 57 joint projects. A total of 217 project managers or contact persons received the questionnaire. The response...

  15. Food Technologies: Fermentation

    NARCIS (Netherlands)

    Nout, M.J.R.

    2014-01-01

    Fermentation refers to the use of microorganisms to achieve desirable food properties in the fermented food or beverage. Although the word ‘fermentation’ indicates ‘anaerobic metabolism,’ it is also used in a broader sense to indicate all anaerobic and aerobic microbiological and biochemical

  16. Aptamer-based technology for food analysis.

    Science.gov (United States)

    Liu, Xiaofei; Zhang, Xuewu

    2015-01-01

    Aptamers are short and functional single-stranded oligonucleotide sequences selected from systematic evolution of ligands by exponential enrichment (SELEX) process, which have the capacity to recognize various classes of target molecules with high affinity and specificity. Various analytical aptamers acquired by SELEX are widely used in many research fields, such as medicine, biology, and chemistry. However, the application of this innovative and emerging technology to food safety is just in infant stage. Food safety plays a very important role in our daily lives because varieties of poisonous and harmful substances in food affect human health. Aptamer technique is promising, which can overcome many disadvantages of existing detection methods in food safety, such as long detection time, low sensitivity, difficult, and expensive antibody preparation. This review provides an overview of various aptamer screening technologies and summarizes the recent applications of aptamers in food safety, and future prospects are also discussed.

  17. Journal of Food Technology in Africa: Submissions

    African Journals Online (AJOL)

    Journal of Food Technology in Africa. ... Food Science and Technology is viewed as an important instrument in tackling food security challenges. ... will be sent to the corresponding author, as electronic portable document (PDF) attachments, ...

  18. Food Irradiation Technology in the Philippines

    International Nuclear Information System (INIS)

    De Guzman, Zenaida M.

    2015-01-01

    The applications of ionizing radiation for the preservation of food and agricultural products by delaying ripening, destruction of insect pests and pathogenic microorganisms have shown great promise in the country. For more than 30 years, the Philippine Nuclear Research Institute (PNRI) in collaboration with other government and private sectors, has undertaken research and development studies and pilot and semi-commercial scale irradiation of foods. Some of the foods found to be benefit from the use of irradiation technology are mangoes and papayas for disinfestations and delay ripening; onions and garlic for inhibition of sprouting; spices and dehydrated products for reduction of microbial growth and rice and corn for insect and shelf-life extension. Two regulations approved by the Department of Health and the Bureau of Plant Industry are in place creating an enabling environment for food safety and trade of irradiated food. The conduct of awareness program in various parts of the country provided knowledge and information about the food irradiation technology. The Institute has been part of the international projects (IAEA and USDA) on the use of irradiation for sanity and phytosanitary treatment of food. The projects not only established the potential benefits of food irradiation for socio-economic development of the country but also built considerable capacity to properly treat foods. Some of the recent developments in the area of food irradiation include publication of Philippine National Standard (PNS) on Food Irradiation: Code of Good Irradiation Practices which will serve as a guide for stakeholders to irradiate food, a newly-established Electron Beam Facility to demonstrate the potential use of EB and a feasibility study of putting-up a commercial irradiation facility in the country. (author)

  19. New technology for food systems and security.

    Science.gov (United States)

    Yau, N J Newton

    2009-01-01

    In addition to product trade, technology trade has become one of the alternatives for globalization action around the world. Although not all technologies employed on the technology trade platform are innovative technologies, the data base of international technology trade still is a good indicator for observing innovative technologies around world. The technology trade data base from Sinew Consulting Group (SCG) Ltd. was employed as an example to lead the discussion on security or safety issues that may be caused by these innovative technologies. More technologies related to processing, functional ingredients and quality control technology of food were found in the data base of international technology trade platform. The review was conducted by categorizing technologies into the following subcategories in terms of safety and security issues: (1) agricultural materials/ingredients, (2) processing/engineering, (3) additives, (4) packaging/logistics, (5) functional ingredients, (6) miscellaneous (include detection technology). The author discusses examples listed for each subcategory, including GMO technology, nanotechnology, Chinese medicine based functional ingredients, as well as several innovative technologies. Currently, generation of innovative technology advance at a greater pace due to cross-area research and development activities. At the same time, more attention needs to be placed on the employment of these innovative technologies.

  20. International Facility for Food Irradiation Technology

    International Nuclear Information System (INIS)

    Farkas, J.

    1982-01-01

    The International Facility for Food Irradiation Technology (IFFIT) was set up in November 1978 for a period of five years at the Pilot Plant for Food Irradiation, Wageningen, The Netherlands under an Agreement between the FAO, IAEA and the Ministry of Agriculture and Fisheries of the Government of the Netherlands. Under this Agreement, the irradiation facilities, office space and services of the Pilot Plant for Food Irradiation are put at IFFIT's disposal. Also the closely located Research Foundation, ITAL, provides certain facilities and laboratory services within the terms of the Agreement. The FAO and IAEA contribute US-Dollar 25,000. Annually for the duration of IFFIT. (orig.) [de

  1. Journal of Food Technology in Africa: Editorial Policies

    African Journals Online (AJOL)

    Focus and Scope. The Journal of Food Technology in Africa is Published Quarterly. It is intended for publication of papers on original work and reviews of all aspects of Food Science, Technology and Nutrition. Articles should be basic research that impinge on major areas of concern and relevance to the Food Industry in the ...

  2. Food irradiation: technology transfer to developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Kunstadt, Peter [Nordion International Inc., Kanata, ON (Canada)

    1990-01-01

    This paper discusses Nordion's experiences to-date with the Food Irradiation Project in Thailand (1987-1990). This project will enable the Government of Thailand and the Thai food industry to benefit from established Canadian technology in food irradiation. It includes the design and the construction in Thailand of a multipurpose irradiation facility, similar to the Canadian Irradiation Centre. In addition Canada provides the services, for extended periods of time, of construction and installation management and experts in facility operation, maintenance and training. The Technology Transfer component is a major part of the overall Thai Food Irradiation Project. Its purpose is to familiarize Thai government and industry personnel with Canadian requirements in food regulations and distribution and to conduct market and consumer tests of selected Thai irradiated food products in Canada, once the products have Canadian regulatory approval. On completion of this project, Thailand will have the necessary facility, equipment and training to continue to provide leadership in food irradiation research, as well as scientific and technical support to food industries not only in Thailand but also in the ASEAN region. (author).

  3. Food irradiation: technology transfer to developing countries

    International Nuclear Information System (INIS)

    Kunstadt, Peter

    1990-01-01

    This paper discusses Nordion's experiences to-date with the Food Irradiation Project in Thailand (1987-1990). This project will enable the Government of Thailand and the Thai food industry to benefit from established Canadian technology in food irradiation. It includes the design and the construction in Thailand of a multipurpose irradiation facility, similar to the Canadian Irradiation Centre. In addition Canada provides the services, for extended periods of time, of construction and installation management and experts in facility operation, maintenance and training. The Technology Transfer component is a major part of the overall Thai Food Irradiation Project. Its purpose is to familiarize Thai government and industry personnel with Canadian requirements in food regulations and distribution and to conduct market and consumer tests of selected Thai irradiated food products in Canada, once the products have Canadian regulatory approval. On completion of this project, Thailand will have the necessary facility, equipment and training to continue to provide leadership in food irradiation research, as well as scientific and technical support to food industries not only in Thailand but also in the ASEAN region. (author)

  4. Food irradiation: Technology transfer to developing countries

    Science.gov (United States)

    Kunstadt, Peter

    This paper discusses Nordion's experiences to-date with the Food Irradiation Project in Thailand (1987-1990). This project will enable the Government of Thailand and the Thai food industry to benefit from established Canadian technology in food irradiation. It includes the design and the construction in Thailand of a multipurpose irradiation facility, similar to the Canadian Irradiation Centre. In addition Canada provides the services, for extended periods of time, of construction and installation management and experts in facility operation, maintenance and training. The Technology Transfer component is a major part of the overall Thai Food Irradiation Project. Its purpose is to familiarize Thai government and industry personnel with Canadian requirements in food regulations and distribution and to conduct market and consumer tests of selected Thai irradiated food products in Canada, once the products have Canadian regulatory approval. On completion of this project, Thailand will have the necessary facility, equipment and training to continue to provide leadership in food irradiation research, as well as scientific and technical support to food industries not only in Thailand by also in the ASEAN region.

  5. Introduction to Innovative Food Processing and Technology

    OpenAIRE

    Tokusoglu, Ozlem

    2015-01-01

    Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

  6. 1991 research and technology

    Science.gov (United States)

    1992-01-01

    Selected research and technology activities at Ames Research Center, including the Moffett Field site and the Dryden Flight Research Facility, are summarized. These activities exemplify the Center's varied and productive research efforts for 1991.

  7. Modern technologies and food safety

    Directory of Open Access Journals (Sweden)

    Grujić Radoslav

    2003-01-01

    Full Text Available To resolve the problem of lack of food in the World within primary food production, processing and procedures of preserving, new methods have been implemented (implementation of materials for protection, medications utilization of new areas for production purposes, use of GM microorganisms plants, even animals, utilization of food additives, introduction of new procedures of preservation, etc However, these procedures do not always move in the direction of ensuring food safety. Implementation of mentioned procedures creates resistance by consumers. The opinion and the attitude about this issue are very important all over the World. According to recent research performed in last five years, most of the population of developed and semi-developed countries considers food safety a priority, as second place the presence of ingredients that can be harmful for human health and as third the content of nutrients required for normal functioning of the body. The WHO, CAC, WTO and other international institutions support these attitudes of consumers. There is more and more obvious pressure on food producers to preserve the environment, which has resulted in the introduction of production procedures known as "cleaning production".Regardless of which procedure is involved, it is necessary to implement the efficient quality control system and food safety. It is mandatory to request the compulsory implementation of different systems that are defined through the GMR GHR HACCR ISO 9000. In food production, these systems are complementary and only with full implementation of all of them in practice will if be possible to ensure the continuous production of quality and safe products. Food production must be seen as an undisturbed chain: primary production, transport, processing, storage, distribution and consumption. With strict implementation of the mentioned standards in all parts of the chain, the risk of injuries and poisoning of consumers will be decreased to

  8. Technology Solutions for School Food Service.

    Science.gov (United States)

    Begalle, Mary

    2002-01-01

    Considers ways to include schools' food service departments in technology planning. Discusses school food service software applications, considerations and challenges of automating food service operations, and business-to-business Internet solutions. (EV)

  9. Research and technology, 1993

    Science.gov (United States)

    1994-01-01

    Selected research and technology activities at Ames Research Center, including the Moffett Field site and the Dryden Flight Research Facility, are summarized. These activities exemplify the center's varied and productive research efforts for 1993. This year's report presents some of the challenging work recently accomplished in the areas of aerospace systems, flight operations and research, aerophysics, and space research.

  10. BARC golden jubilee and DAE-BRNS life sciences symposium 2006 on trends in research and technologies in agriculture and food sciences: abstracts

    International Nuclear Information System (INIS)

    2006-01-01

    Better methods of agricultural production, availability of hybrid and mutant varieties of crop plants, irrigation, fertilizers and pesticides have all helped boost up agricultural production, and famines and droughts remain restricted to a few pockets in the world. Innovative approach to step up agricultural production, especially of food crops symbolize synergy and synthesis of conventional and mutation breeding aided by modern biotechnological tools like DNA markers and gene manipulation in tune with the policy of environmental and soil conservation. It has increased the production of oil seeds in India during the last decade with a shift from groundnut and mustard to soybean and sunflower. Bhabha Atomic Research Centre (BARC), Mumbai which has strongly pursued the important societal programmes using nuclear technology in agriculture and health, has made a very significant impact on the country's agriculture by developing 27 new crop varieties mostly of oil seeds and pulses. Further, radiation processing of food, pioneered in India by BARC, is now gaining global acceptance and has opened new vistas for agriculture exports. The present symposium is dedicated to trends in research of technologies in agriculture and food sciences. The papers relevant to INIS are indexed separately

  11. Eduardo Primo Yúfera, founder of Revista de Agroquímica y Tecnología de Alimentos and pioneer on food science and technology research in Spain.

    Science.gov (United States)

    Ayala-Gascón, M; Aleixandre-Benavent, R; Gandía-Balaguer, A

    2011-12-01

    Eduardo Primo Yúfera was the founder and director of the Instituto de Agroquímica y Tecnología de Alimentos (IATA, 1957-1974) until he was appointed president of the Consejo Superior de Investigaciones Científicas (CSIC). His aim to publicize food science led him to create the Revista de Agroquímica y Tecnología de Alimentos in 1961, the forerunner of this journal, Food Science and Technology International, which he directed until 1977. Of his scientific output, 50% has been published in this journal. He is considered to be the promoter and exponent of Food Science and Technology and Chemical Ecology in Spain as well as the instigator of the country's innovation model (R&D and innovation). In his work, he was able to combine basic research excellence and socially relevant applied research to move both science and society forward. He was an example and inspiration to many colleagues and followers. The aim of this study is to highlight the influence and importance of Primo Yúfera in the formation, development and consolidation of the journal Revista de Agroquímica y Tecnología de Alimentos, and to appraise his scientific contribution to this journal.

  12. Prospect of nuclear application in food technology

    Energy Technology Data Exchange (ETDEWEB)

    Maha, M [National Atomic Energy Agency, Jakarta (Indonesia). Pasar Djumat Research Centre

    1982-04-01

    Irradiation changes the normal living process of cells and the structure of molecules. It is good for food preservation because it kills off many of the microorganisms in the product and makes the remainder more sensitive to antimicrobial factors prevailing after the radiation treatment. It offers more benefits than conventional preservation in that it increases storage stability and quality of foodstuffs with the minimum use of energy. Good storage quality gives way to wider distribution of food, alleviates the world's food shortage, and improves food supplies. Research proved that irradiation increased the quality of subtropical fruits, spices, fish, and meat. No refrigeration is needed to store meat, poultry and fish preserved by the combination of irradiation and mild heat treatment. Nuclear technology can also be applied to destroy harmful insects, to sterilize food, to inhibit the sprouting of root crops, and to control ripening in stored fruits and vegetables. Based on the above potentials of irradiation, the prospect of nuclear application in food technology is promising.

  13. Non-food radiation technology applications of food commodities

    International Nuclear Information System (INIS)

    Mastro, N.L. Del

    2004-01-01

    At present food irradiation is considered an effective, broad-spectrum, residue-free, mature technology. Expertise in irradiation processing exists in a network of centers around the world, some of them in developing countries like Brazil and Argentina South American region. The use of renewable resources coming from crops products is becoming attractive also for non-food applications. In this sense, a complete new approach of higher aggregated value of some commodities like soy and maize, for example, is as renewable resources to create functional polymers, mainly for innovative biodegradable packaging solutions. There is a need of innovative approaches to produce edible/biodegradable materials from natural polymeric macromolecules with adequate properties. Incipient researches pointed to the successful use of irradiation processing to obtain or modify different types of biodegradable/edible plastic materials. This new radiation technology application is particularly important for countries that are leading producers of soybean and other commodities. (Author)

  14. Non-food radiation technology applications of food commodities

    Energy Technology Data Exchange (ETDEWEB)

    Mastro, N.L. Del . [Center of Radiation Technology, Energy and Nuclear Research Institute (IPEN-CNEN/SP), Travessa R, 400 Cidade Universitaria, 05508-900 Sao Paulo (Brazil)

    2004-07-01

    At present food irradiation is considered an effective, broad-spectrum, residue-free, mature technology. Expertise in irradiation processing exists in a network of centers around the world, some of them in developing countries like Brazil and Argentina South American region. The use of renewable resources coming from crops products is becoming attractive also for non-food applications. In this sense, a complete new approach of higher aggregated value of some commodities like soy and maize, for example, is as renewable resources to create functional polymers, mainly for innovative biodegradable packaging solutions. There is a need of innovative approaches to produce edible/biodegradable materials from natural polymeric macromolecules with adequate properties. Incipient researches pointed to the successful use of irradiation processing to obtain or modify different types of biodegradable/edible plastic materials. This new radiation technology application is particularly important for countries that are leading producers of soybean and other commodities. (Author)

  15. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  16. Ultrasonication and food technology: A review

    OpenAIRE

    Ishrat Majid; Gulzar Ahmad Nayik; Vikas Nanda

    2015-01-01

    With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extractio...

  17. Food technology: challenge for health promotion.

    Science.gov (United States)

    Kwon, T W; Hong, J H; Moon, G S; Song, Y S; Kim, J I; Kim, J C; Kim, M J

    2004-01-01

    The food technology has brought countless benefits to today's food supply. Despite its many positive contributions, it has also brought unintended negative consequences. It is the time to mobilize the food technology to help the food supply more secure, safer and healthier, and here three possible approaches are foreseeable: First, we should continue to improve the conventional technologies. Many wholesome foods have been prepared and preserved using natural materials simply by fermentation. Second, we have to enhance the minimal processing as much as applicable. Third, new ingredients, intelligent packaging and functional foods should be explored to improve food supply and health. Today, consumer interest in the functional foods has been increased tremendously, and the future of food lies in the functional foods. However, the situations in the developing world are different from this. As food resource is limited in this region, food technology has to be emphasized to increase food supply. To help solve such complex problems, not only new technologies, but also conventional technologies have to be mobilized. Simultaneously, even higher technical capabilities have to be built up by applying new findings from the related disciplines to allow the food technology to play its vital role.

  18. Food Technology. Specification for Irradiated Food

    International Nuclear Information System (INIS)

    2007-01-01

    This Ghana Standard specifies the requirements and methods of sampling and testing for foods processed by irradiation for sprout inhibition, insect disinfestation, microbial decontamination, delaying ripening, shelf-life extension and general phytosanitary treatment. The absorbed dose range covered by this guide is between 0.2kGy and 10kGy. The practical minimum or maximum dose of a treatment may be lower or higher than this range, depending on the purpose of irradiation and the radiation tolerance of the particular type of food. This standard does not apply to foods exposed to radiation imparted by measuring instruments used for inspection purposes

  19. Soils and food security | Nortcliff | Nigerian Journal of Technological ...

    African Journals Online (AJOL)

    A threat impacting on food security strongly in Africa is nutrient mining where insufficient nutrients are returned to the soil after crop production. The impacts of global change on food security and the potential impacts of global markets for food and land are also briefly discussed. Nigerian Journal of Technological Research ...

  20. Modern supercritical fluid technology for food applications.

    Science.gov (United States)

    King, Jerry W

    2014-01-01

    This review provides an update on the use of supercritical fluid (SCF) technology as applied to food-based materials. It advocates the use of the solubility parameter theory (SPT) for rationalizing the results obtained when employing sub- and supercritical media to food and nutrient-bearing materials and for optimizing processing conditions. Total extraction and fractionation of foodstuffs employing SCFs are compared and are illustrated by using multiple fluids and unit processes to obtain the desired food product. Some of the additional prophylactic benefits of using carbon dioxide as the processing fluid are explained and illustrated with multiple examples of commercial products produced using SCF media. I emphasize the role of SCF technology in the context of environmentally benign and sustainable processing, as well as its integration into an overall biorefinery concept. Conclusions are drawn in terms of current trends in the field and future research that is needed to secure new applications of the SCF platform as applied in food science and technology.

  1. Exploring novel food proteins and processing technologies

    NARCIS (Netherlands)

    Avila Ruiz, Geraldine

    2016-01-01

    Foods rich in protein are nowadays high in demand worldwide. To ensure a sustainable supply and a high quality of protein foods, novel food proteins and processing technologies need to be explored to understand whether they can be used for the development of high-quality protein foods. Therefore,

  2. Innovations in food technology for health.

    Science.gov (United States)

    Hsieh, Yun-Hwa Peggy; Ofori, Jack Appiah

    2007-01-01

    Modern nutritional science is providing ever more information on the functions and mechanisms of specific food components in health promotion and/or disease prevention. In response to demands from increasingly health conscious consumers, the global trend is for food industries to translate nutritional information into consumer reality by developing food products that provide not only superior sensory appeal but also nutritional and health benefits. Today's busy life styles are also driving the development of healthy convenience foods. Recent innovations in food technologies have led to the use of many traditional technologies, such as fermentation, extraction, encapsulation, fat replacement, and enzyme technology, to produce new health food ingredients, reduce or remove undesirable food components, add specific nutrient or functional ingredients, modify food compositions, mask undesirable flavors or stabilize ingredients. Modern biotechnology has even revolutionized the way foods are created. Recent discoveries in gene science are making it possible to manipulate the components in natural foods. In combination with biofermentation, desirable natural compounds can now be produced in large amounts at a low cost and with little environmental impact. Nanotechnology is also beginning to find potential applications in the area of food and agriculture. Although the use of new technologies in the production of health foods is often a cause for concern, the possibility that innovative food technology will allow us to produce a wide variety of food with enhanced flavor and texture, while at the same time conferring multiple health benefits on the consumer, is very exciting.

  3. Research and Technology, 1995

    Science.gov (United States)

    1996-01-01

    This report presents some of the challenging research and technology accomplished at NASA Ames Research Center during FY95. The accomplishments address almost all goals of NASA's four Strategic Enterprises: Aeronautics and Space Transportation Technology, Space Sciences, Human Exploration and Development of Space, and Mission to Planet Earth. The report's primary purpose is to inform stakeholders, customers, partners, colleagues, contractors, employees, and the American people in general about the scope and diversity of the research and technology activities. Additionally, the report will enable the reader to know how these goals are being addressed.

  4. Research and Technology 1997

    Science.gov (United States)

    1998-01-01

    This report highlights the challenging work accomplished during fiscal year 1997 by Ames research scientists and engineers. The work is divided into accomplishments that support the goals of NASA s four Strategic Enterprises: Aeronautics and Space Transportation Technology, Space Science, Human Exploration and Development of Space (HEDS), and Earth Science. NASA Ames Research Center s research effort in the Space, Earth, and HEDS Enterprises is focused i n large part to support Ames lead role for Astrobiology, which broadly defined is the scientific study of the origin, distribution, and future of life in the universe. This NASA initiative in Astrobiology is a broad science effort embracing basic research, technology development, and flight missions. Ames contributions to the Space Science Enterprise are focused in the areas of exobiology, planetary systems, astrophysics, and space technology. Ames supports the Earth Science Enterprise by conducting research and by developing technology with the objective of expanding our knowledge of the Earth s atmosphere and ecosystems. Finallv, Ames supports the HEDS Enterprise by conducting research, managing spaceflight projects, and developing technologies. A key objective is to understand the phenomena surrounding the effects of gravity on living things. Ames has also heen designated the Agency s Center of Evcellence for Information Technnlogv. The three cornerstones of Information Technology research at Ames are automated reasoning, human-centered computing, and high performance computing and networking.

  5. Ultrasonication and food technology: A review

    Directory of Open Access Journals (Sweden)

    Ishrat Majid

    2015-12-01

    Full Text Available With increasing consumers demand and tightening of food and environmental regulations, traditional food-processing techniques have lost their optimum performance which gave rise to new and powerful technologies. Ultrasonic is a one of the fast, versatile, emerging, and promising non-destructive green technology used in the food industry from last few years. The ultrasound is being carried out in various areas of food technology namely crystallization, freezing, bleaching, degassing, extraction, drying, filtration, emulsification, sterilization, cutting, etc. Ultrasound is being applied as an effective preservation tool in many food-processing fields viz. vegetables and fruits, cereal products, honey, gels, proteins, enzymes, microbial inactivation, cereal technology, water treatment, diary technology, etc. This review summarizes the latest knowledge on impact and application of ultrasound in food technology.

  6. OMICs technologies: tools for food science

    National Research Council Canada - National Science Library

    Benkeblia, Noureddine

    2012-01-01

    ... in the transformation from industrial to sustained food technologies and the role of these omics tools to mitigate the growing pressure of limited natural resources and environmental degradation...

  7. Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

    International Nuclear Information System (INIS)

    Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

    2010-04-01

    This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

  8. Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

    2010-04-15

    This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

  9. Research and Technology 2000

    Science.gov (United States)

    2001-01-01

    This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 2000. It comprises 138 short articles submitted by staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology, a table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that was reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.gre.nasa.gov/GLTRS).

  10. Research and Technology 2002

    Science.gov (United States)

    Kim, Walter S.

    2003-01-01

    This report selectively summarizes NASA Glenn Research Center s research and technology accomplishments for fiscal year 2002. It comprises 166 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/WWW/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS/).

  11. Research and Technology 2001

    Science.gov (United States)

    2002-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2001. It comprises 156 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and, where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available online (http://www.grc.nasa.gov/www/RT). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov/GLTRS).

  12. Research and Technology 1995

    Science.gov (United States)

    1996-01-01

    This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for fiscal year 1995. It comprises over 150 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: aeronautics, aerospace technology, space flight systems, engineering support, Lewis Research Academy, and technology transfer. A table of contents, an author index, and a list of NASA Headquarters program offices have been included to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors (for abstracts of these Lewis-authored reports, visit the Lewis Technical Report Server (LETRS) on the World Wide Web-http://letrs.lerc.nasa.gov/LeTRS/). In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about Lewis' research, visit us on the World Wide web-http://www.lerc.nasa.gov.

  13. Research and Technology, 1998

    Science.gov (United States)

    1999-01-01

    This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1998. It comprises 134 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to he a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. At the time of publication, NASA Lewis was undergoing a name change to the NASA John H. Glenn Research Center at Lewis Field.

  14. Status and development of food irradiation technology in Korea

    International Nuclear Information System (INIS)

    Byun, Myungwoo; Park, Younnam

    1996-01-01

    In Korea, the health authorities and food industry emphasize the need of sanitary food production, which is mainly resulted from the recent growing of consumer's interest in the safety of food. For that reason, development of a new alternative technology of chemicals currently used for decontamination and disinfestation has become an urgent task in the domestic and worldwide food industry. Furthermore, the improvement of quality and manufacturing process of processed foods is a requisite for winning the competition in export fields. Irradiation technology being practically applicable in the food industry has been well established on the basis of more than 40 years of R and D work in the fields of the increasing availability of food-stuffs, sanitary food production and quarantine treatment in a food trade. The wholesomeness of irradiated foods has been officially approved in 37 countries, of which 25 countries are commercially utilizing food irradiation technology. The first commercial irradiator in Korea (18.5 PBq : 500 kCi 60 Co, max. cap ; 4 MCi) was established at Kyungki-do, Yeoju-gun by Greenpia Tech. Inc. with the technical assistance of Korea Atomic Energy Research Institute in June 1987. As of 1996, thirteen irradiated food groups (above 25 items) have been domestically approved for human consumption and an industrial irradiation facility is also available. However, the promotion of consumer acceptance toward irradiated foods is considered as a confronted subject to be studied for a commercial utilization of this technology

  15. Emerging Food Processing Technologies and Factors Impacting their Industrial Adoption.

    Science.gov (United States)

    Priyadarshini, Anushree; Rajauria, Gaurav; O'Donnell, Colm P; Tiwari, Brijesh K

    2018-06-04

    Innovative food processing technologies have been widely investigated in food processing research in recent years. These technologies offer key advantages for advancing the preservation and quality of conventional foods, for combatting the growing challenges posed by globalization, increased competitive pressures and diverse consumer demands. However, there is a need to increase the level of adoption of novel technologies to ensure the potential benefits of these technologies are exploited more by the food industry. This review outlines emerging thermal and non-thermal food processing technologies with regard to their mechanisms, applications and commercial aspects. The level of adoption of novel food processing technologies by the food industry is outlined and the factors that impact their industrial adoption are discussed. At an industry level, the technological capabilities of individual companies, their size, market share as well as their absorptive capacity impact adoption of a novel technology. Characteristics of the technology itself such as costs involved in its development and commercialization, associated risks and relative advantage, its level of complexity and compatibility influence the technology's adoption. The review concludes that a deep understanding of the development and application of a technology along with the factors influencing its acceptance are critical for its commercial adoption.

  16. Research and Technology, 1994

    Science.gov (United States)

    1995-01-01

    This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1994. It comprises approximately 200 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: Aeronautics, Aerospace Technology, Space Flight Systems, Engineering and Computational Support, Lewis Research Academy, and Technology Transfer. A table of contents and author index have been developed to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible.

  17. Research and Technology 1999

    Science.gov (United States)

    2000-01-01

    This report selectively summarizes the NASA Glenn Research Center's research and technology accomplishments for the fiscal year 1999. It comprises 130 short articles submitted by the staff scientists and engineers. The report is organized into four major sections: Aeronautics. Research and Technology, Space, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about research at NASA Glenn, visit us on the World Wide Web (http://www.grc.nasa.gov). This document is available on the World Wide Web (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (GLTRS) on the World Wide Web (http://gltrs.grc.nasa.gov/GLTRS/).

  18. Technology research and development

    International Nuclear Information System (INIS)

    Haas, G.M.; Abdov, M.A.; Baker, C.C.; Beuligmann, R.F.

    1985-01-01

    The U.S. Dept. of Energy discusses the new program plan, the parameters of which are a broad scientific and technology knowledge base, an attractive plasma configuration to be determined, and other issues concerning uncertainty as to what constitutes attractive fusion options to be determined in the future, and increased collaboration. Tables show changing directions in magnetic fusion energy, two examples of boundary condition impacts on long-term technology development, and priority classes of the latter. The Argonne National Laboratory comments on the relationship between science, technology and the engineering aspects of the fusion program. UCLA remarks on the role of fusion technology in the fusion program plan, particularly on results from the recent studies of FINESSE. General Dynamics offers commentary on the issues of a reduced budget, and new emphasis on science which creates an image of the program. A table illustrates technology research and development in the program plan from an industrial perspective

  19. Research & Technology 2005

    Science.gov (United States)

    2006-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2005. It comprises 126 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

  20. Research and Technology 2004

    Science.gov (United States)

    2005-01-01

    This report selectively summarizes NASA Glenn Research Center's research and technology accomplishments for fiscal year 2004. It comprises 133 short articles submitted by the staff scientists and engineers. The report is organized into three major sections: Programs and Projects, Research and Technology, and Engineering and Technical Services. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Glenn-published technical reports, journal articles, and presentations prepared by Glenn staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information, visit Glenn's Web site at http://www.nasa.gov/glenn/. This document is available online (http://www.grc.nasa.gov/WWW/RT/). For publicly available reports, visit the Glenn Technical Report Server (http://gltrs.grc.nasa.gov).

  1. Development of radiation fusion technology with food technology by the application of high dose irradiation

    International Nuclear Information System (INIS)

    Lee, Juwoon; Kim, Jaehun; Choi, Jongil

    2012-04-01

    This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

  2. Development of radiation fusion technology with food technology by the application of high dose irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Juwoon; Kim, Jaehun; Choi, Jongil; and others

    2012-04-15

    This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

  3. Food irradiation: a technology for the eighties

    International Nuclear Information System (INIS)

    Laizier, J.

    1985-09-01

    After a brief review of the physical principles of the process of food irradiation and the biological and chemical effects of radiations, data concerning studies about the wholesomeness of irradiated food are presented. The most important fields of potential industrial applications are described. The technology of food irradiators, the economy, present status and future trends of food irradiation are analyzed, with emphasis on the French example

  4. 2007 Research and Technology

    Science.gov (United States)

    Riddlebaugh, Stephen M. (Editor)

    2008-01-01

    The NASA Glenn Research Center is pushing the envelope of research and technology in aeronautics, space exploration, science, and space operations. Our research in aeropropulsion, structures and materials, and instrumentation and controls is enabling next-generation transportation systems that are faster, more environmentally friendly, more fuel efficient, and safer. Our research and development of space flight systems is enabling advanced power, propulsion, communications, and human health systems that will advance the exploration of our solar system. This report selectively summarizes NASA Glenn Research Center s research and technology accomplishments for fiscal year 2007. Comprising 104 short articles submitted by the staff scientists and engineers, the report is organized into six major sections: Aeropropulsion, Power and Space Propulsion, Communications, Space Processes and Experiments, Instrumentation and Controls, and Structures and Materials. It is not intended to be a comprehensive summary of all the research and technology work done over the past fiscal year; most of the work is reported in Glenn-published technical reports, journal articles, and presentations. For each article in this report, a Glenn contact person has been identified, and where possible, a reference document is listed so that additional information can be easily obtained.

  5. Career opportunities for food technologies | Wongo | Journal of Food ...

    African Journals Online (AJOL)

    Journal of Food Technology in Africa. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 2 (1999) >. Log in or Register to get access to full text downloads.

  6. The Center for Advanced Food Technology: Food Related Studies.

    Science.gov (United States)

    1992-11-16

    34Molecular Restructuring and Complexation During Extrusion of Cornmeal ," Food Extnusion Scie-nce and Technology pp. 437-448.j J, Kokini, C.-T. Ho, M. Karwe...L-F., and K-Y. Chan (1991) "Molecular Transformations of Starch and Protein During Twin-Screw Extrusion Processing of Cornmeal ," Food Extrusion

  7. JSC research and technology

    Science.gov (United States)

    1993-01-01

    The primary roles and missions of JSC incorporate all aspects of human presence in space. Therefore, the Center is involved in the development of technology that will allow humans to stay longer in Earth orbit, allow safe flight in space, and provide capabilities to explore the Moon and Mars. The Center's technology emphasis areas include human spacecraft development, human support systems and infrastructure, and human spacecraft operations. Safety and reliability are critical requirements for the technologies that JSC pursues for long-duration use in space. One of the objectives of technology development at the Center is to give employees the opportunity to enhance their technological expertise and project management skills by defining, designing, and developing projects that are vital to the Center's strategy for the future. This report is intended to communicate within and outside the Agency our research and technology (R&T) accomplishments, as well as inform Headquarters program managers and their constituents of the significant accomplishments that have promise for future Agency programs. While not inclusive of all R&T efforts, the report presents a comprehensive summary of JSC projects in which substantial progress was made in the 1992 fiscal year. At the beginning of each project description, names of the Principal Investigator (PI) and the Technical Monitor (TM) are given, followed by their JSC mail codes or their company or university affiliations. The funding sources and technology focal points are identified in the index.

  8. Traditional Chinese food technology and cuisine.

    Science.gov (United States)

    Li, Jian-rong; Hsieh, Yun-Hwa P

    2004-01-01

    From ancient wisdom to modern science and technology, Chinese cuisine has been established from a long history of the country and gained a global reputation of its sophistication. Traditional Chinese foods and cuisine that exhibit Chinese culture, art and reality play an essential role in Chinese people's everyday lives. Recently, traditional Chinese foods have drawn a great degree of attention from food scientists and technologists, the food industry, and health promotion institutions worldwide due to the extensive values they offer beyond being merely another ethnic food. These traditional foods comprise a wide variety of products, such as pickled vegetables, salted fish and jellyfish, tofu and tofu derived products, rice and rice snack foods, fermented sauces, fish balls and thousand-year-old eggs. An overview of selected popular traditional Chinese foods and their processing techniques are included in this paper. Further development of the traditional techniques for formulation and production of these foods is expected to produce economic, social and health benefits.

  9. Research and Technology 1996

    Science.gov (United States)

    1997-01-01

    This report highlights the challenging work accomplished during fiscal year 1996 by Ames research scientists, engineers, and technologists. It discusses research and technologies that enable the Information Age, that expand the frontiers of knowledge for aeronautics and space, and that help to maintain U.S. leadership in aeronautics and space research and technology development. The accomplishments span the range of goals of NASA's four Strategic Enterprises: (1) Aeronautics and Space Transportation Technology, (2) Space Science, (3) Human Exploration and Development of Space, and (4) Mission to Planet Earth. The primary purpose of this report is to communicate knowledge--to inform our stakeholders, customers, and partners, and the people of the United States about the scope and diversity of Ames' mission, the nature of Ames' research and technology activities, and the stimulating challenges ahead. The accomplishments cited illustrate the contributions that Ames is making to improve the quality of life for our citizens and the economic position of the United States in the world marketplace.

  10. Abstracts of the 15. Brazilian congress on food science and technology

    International Nuclear Information System (INIS)

    1996-01-01

    This meeting was about food science, technology and energy production. In this meeting were discussed subjects concerned food preservation and irradiation sources in economical, technological, social and research aspects

  11. Research and Technology 1997

    Science.gov (United States)

    1998-01-01

    NASA Lewis Research Center is responsible for developing and transferring critical technologies that address national priorities in aeropropulsion and space applications in partnership with U.S. industries, universities, and Government institutions. As NASA s designated Lead Center for Aeropropulsion, our role is to develop, verify, and transfer aeropropulsion technologies to U.S. industry. As NASA s designated Center of Excellence in Turbomachinery, our role is to develop new and innovative turbomachinery technology to improve the reliability, performance, efficiency and affordability, capacity, and environmental compatibility of future aerospace vehicles. We also maintain a science and technology development role in aeropropulsion, communications, space power and onboard propulsion, and microgravity fluid physics and combustion. We are committed to enabling non-aerospace U.S. industries to benefit directly from the technologies developed through our programs to maximize the benefit to the Nation and the return on each taxpayer s investment. In addition, we are aggressively pursuing continuous improvement in our management and business practices and striving for diversity in our workforce as together we push the edge of technology in space and aeronautics. The Lewis Research Center is a unique facility located in an important geographical area, the southwest corner of Cleveland, Ohio. Situated on 350 acres of land adjacent to the Cleveland Hopkins International Airport, Lewis comprises more than 140 buildings that include 24 major facilities and over 500 specialized research and test facilities. Additional facilities are located at Plum Brook Station, which is about 50 miles west of Cleveland. Over 3700 people staff Lewis, including civil service employees and support service contractors. Over half of them are scientists and engineers, who plan, conduct or oversee, and report on our research tasks and projects. They are assisted by technical specialists, skilled

  12. Applications of aerospace technology in industry. A technology transfer profile: Food technology

    Science.gov (United States)

    Murray, D. M.

    1971-01-01

    Food processing and preservation technologies are reviewed, expected technological advances are considered including processing and market factors. NASA contributions to food technology and nutrition are presented with examples of transfer from NASA to industry.

  13. A review of emerging technologies for food refrigeration applications

    International Nuclear Information System (INIS)

    Tassou, S.A.; Lewis, J.S.; Ge, Y.T.; Hadawey, A.; Chaer, I.

    2010-01-01

    Refrigeration has become an essential part of the food chain. It is used in all stages of the chain, from food processing, to distribution, retail and final consumption in the home. The food industry employs both chilling and freezing processes where the food is cooled from ambient to temperatures above 0 deg. C in the former and between -18 deg. C and -35 deg. C in the latter to slow the physical, microbiological and chemical activities that cause deterioration in foods. In these processes mechanical refrigeration technologies are invariably employed that contribute significantly to the environmental impacts of the food sector both through direct and indirect greenhouse gas emissions. To reduce these emissions, research and development worldwide is aimed at both improving the performance of conventional systems and the development of new refrigeration technologies of potentially much lower environmental impacts. This paper provides a brief review of both current state of the art technologies and emerging refrigeration technologies that have the potential to reduce the environmental impacts of refrigeration in the food industry. The paper also highlights research and development needs to accelerate the development and adoption of these technologies by the food sector.

  14. Proceedings of the seventh international food convention: nutritional security through sustainable development research and education for healthy foods - souvenir

    International Nuclear Information System (INIS)

    2013-12-01

    At present, the application of advanced technology during production, processing, storage and distribution of food with an ultimate aim of strengthening the socio-economic status of farmers, entrepreneurs and rural artisan community has paramount importance. The convention made an effort to touch upon the following areas: food and nutritional security and sustainability, food processing and engineering, food safety management systems, food health and nutrition, skill development and entrepreneurship, food science and technology research etc. Papers relevant to INIS are indexed separately

  15. Research and Technology 2003

    Science.gov (United States)

    2004-01-01

    The NASA Glenn Research Center at Lewis Field, in partnership with U.S. industries, universities, and other Government institutions, is responsible for developing critical technologies that address national priorities in aeropropulsion and space applications. Our work is focused on research for new aeropropulsion technologies, aerospace power, microgravity science (fluids and combustion), electric propulsion, and communications technologies for aeronautics, space, and aerospace applications. As NASA s premier center for aeropropulsion, aerospace power, and turbomachinery, our role is to conduct world-class research and to develop key technologies. We contribute to economic growth and national security through safe, superior, and environmentally compatible U.S. civil and military aircraft propulsion systems. Our Aerospace Power Program supports all NASA Enterprises and major programs, including the International Space Station, Advanced Space Transportation, and new initiatives in human and robotic exploration. Glenn Research Center leads NASA s research in the microgravity science disciplines of fluid physics, combustion science, and acceleration measurement. Almost every space shuttle science mission has had an experiment managed by NASA Glenn, and we have conducted a wide array of similar experiments on the International Space Station. The Glenn staff consists of over 3200 civil service employees and support service contractor personnel. Scientists and engineers comprise more than half of our workforce, with technical specialists, skilled workers, and an administrative staff supporting them. We aggressively strive for technical excellence through continuing education, increased diversity in our workforce, and continuous improvement in our management and business practices so that we can expand the boundaries of aeronautics, space, and aerospace technology. Glenn Research Center is a unique facility located in northeast Ohio. Situated on 350 acres of land adjacent

  16. Food Marketing Technology and Contingency Market Valuation

    OpenAIRE

    Garth J. Holloway; Anthony C. Zwart

    1993-01-01

    Marketing activities are introduced into a rational expectations model of the food marketing system. The model is used to evaluate effects of alternative marketing technologies on the distribution of the benefits of contingency markets in agriculture. Benefits depend on two parameters: the cost share of farm inputs and the elasticity of substitution between farm and nonfarm inputs in food marketing. Over a broad spectrum of technologies, consumers are likely to be the net beneficiaries and fa...

  17. Evaluative conditioning of food technologies in China

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2014-01-01

    This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... and a combination of between-subjects control groups and within-subjects control conditions, participants considered three food technologies (conventional, enzyme, and genetic), paired with affectively positive, neutral, and negative images. Subsequent evaluative measurements revealed that EC can explain attitude...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...

  18. Scenario of research on Food Service in Brazil

    Directory of Open Access Journals (Sweden)

    Flávia Milagres CAMPOS

    Full Text Available ABSTRACT Objective: The present study aims to investigate the scenario of research on Food Service in Brazil based on the Stricto Sensu Graduate Programs in Nutrition, research groups, and scientific production. Methods: A search of the research lines including studies related to this topic and the researchers engaged in those studies was conducted. The research groups were identified on the Directory of Research Groups in Brazil website and the profile of the scientific production was based on articles included in the Scientific Electronic Library Online database. Articles published in international journals that were related to research lines focused on food production were also searched and analyzed. Results: The search identified only two graduate programs with research lines that describe the food production as the object of study although 13 graduate programs carry out research related to Food Service, especially focused on nutritional and sanitary aspects of food. The same trend was observed in the national articles. The internationalization of these two research line results from the academic publication in 22 different journals over the past 5 years. Thirty five professors were identified and most of them hold a PhD in Food Science and Technology. The number of research groups increased from two in 2000 to twenty nine in 2010. Conclusion: The inclusion of Food Service in graduate programs is still limited. The main trend observed is towards a closer relationship with Food Science and Technology in terms of the lines of research, professional qualification, and published studies.

  19. Latest research progress on food waste management: a comprehensive review

    Science.gov (United States)

    Zhu, Shangzhen; Gao, Hetong; Duan, Lunbo

    2018-05-01

    Since a large amount of food supplying is provided as a basic line measuring increasing residents’ life standard, food waste has become progressively numeral considerable. Much attention has been drawn to this problem. This work gave an overview on latest researches about anaerobic digestion, composting, generalized management and other developments on management of food waste. Different technologies were introduced and evaluated. Further views on future research in such a field were proposed.

  20. Genetic Technology and Food Security

    NARCIS (Netherlands)

    Grossman, M.R.

    2014-01-01

    In the United States and globally, producers cultivate millions of hectares of genetically modified crops. In the United States, the USDA, EPA, and FDA govern authorization of GMOs under federal laws and agency regulations. Because food produced from GMOs is not considered materially different from

  1. Modern processing technologies and food quality. 18th Food Technology Days '97 dedicated to prof. F. Bitenc

    International Nuclear Information System (INIS)

    Zlender, Bozidar; Gasperlin, Lea; Hocevar, Ivica; Slemenik, Barbka; Hocevar, Polona

    1997-01-01

    Modern processing technologies and food quality. Proceedings of thematic survey of topics in food science and technology and nutrition for postgraduate students, Ljubljana Univ. (Slovenia). Biotechnical Fac., Food Science and Technology Dept

  2. Recent research and development of functional food in Taiwan.

    Science.gov (United States)

    Sun Hwang, Lucy

    2007-08-01

    As the living standard rises, people are more concerned with the health benefits of foods. Functional foods are, therefore, receiving increasing attention worldwide. The functional food market in Taiwan reached 1.78 billion US dollars in 2005. Only those which have been certified by the Department of Health can claim their health benefits. Until January 2007, only 88 functional foods have received the certificates. In addition to the product development in the food industry, research institutes and universities are also actively engaged in the technology development and basic research of functional foods. Many raw materials harvested in Taiwan, including edible plants, herbs, medicinal mushrooms, and sea foods, are investigated for their health benefits, bioactive components and suitable processing technologies.

  3. Food irradiation - a viable technology for reducing postharvest losses of food

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1985-01-01

    Research and development in the past 30 years have clearly demonstrated that food irradiation is a safe, effective and environmentally clean process of food preservation. Twenty-seven countries have approved over 40 irradiated foods or groups of related food items for human consumption, either on an unconditional or a restricted basis. The technology is beginning to play an important role in reducing post-harvest losses of food and in facilitating wider distribution of food in the trade. Its wide application in solving microbial spoilage losses of food, insect disinfestation, improving hygienic qualities, slowing down physiological processes of foods is reviewed. Special emphasis is placed on applications of direct relevance to countries in Asia and the Pacific region

  4. Food irradiation - a viable technology for reducing post harvest losses of food

    International Nuclear Information System (INIS)

    Loaharanu, O.

    1985-01-01

    Research and development in the past 30 years have clearly demonstrated that food irradiation is a safe, effective and environmentally clean process of food preservation. Twenty-seven countries have approved over 40 irradiated foods or groups of related food items for human consumption, either on an unconditional or a restricted basis. The technology is beginning to play an important role in reducing post-harvest losses of food in facilitating wider distribution of food in the trade. Its wide application in solving microbial spoilage loss of food, insect disinfestation, improving hygenic qualities, slowing down physiological processes of foods is reviewed. Special emphasis is placed on applications of direct relevance to countries in Asia and the Pacific region. (author)

  5. National Congress of Food Science and Technology

    International Nuclear Information System (INIS)

    1995-01-01

    ATAM is the principal promoter of the diffusion of food science and technology in Mexico with the organization of the XXVI National Congress of Food Science and Technology. Pre-Congress activities were as follow: two first on 'Food legislation in the United States of America' and the second on 'Characterization of food quality', a magisterial desk on the theme 'The challenge of food industry in front of the present Mexico', two round tables: a) Quality assurance systems and risk analysis 'Iso 9000' and b) 'Biotechnological products' and c) 'H Program'. With the ambitious program, the Congress included 234 papers divided in oral presentations and posters on subjects as: nutrition, education, toxicology, additives, gums, fruits, cereals, new products, dairy products, rheology, oleaginous, risk analysis, critical points, statistics and analysis. The foreign participant countries were Venezuela, Spain, Cuba and United States of America. Short communication. (Author)

  6. Training manual on food irradiation technology and techniques. 2. ed.

    International Nuclear Information System (INIS)

    1982-01-01

    The objective of the revised Training Manual is to help scientists to acquire the necessary knowledge needed for performing proper research and development work in the field of food irradiation. The Manual presents an up-to-date picture of the current state of food irradiation and reflects the important advances made in the technology of food irradiation, in the radiation chemistry of foods, in the microbiology of irradiated foods, in wholesomeness and standardization. It contains the following chapters: (1) Radionuclides and radiation; (2) Radiation detection and measurement; (3) Radiation protection; (4) Radiation chemistry; (5) Effects of radiation on living organisms; (6) Preservation of foods; (7) Radiation preservation of foods; (8) Packaging; (9) Combination processes; (10) Limitations of food irradiation; (11) Wholesomeness of irradiated foods; (12) Government regulation of irradiated foods; (13) Food irradiation facilities; (14) Commercial aspects of food irradiation; (15) Literature sources. The practical part of the Manual contains a revised and expanded series of detailed laboratory exercises in the use of ionizing radiation for food processing

  7. Progressive technologies in the food industry

    International Nuclear Information System (INIS)

    Chyleova, L.; Sukova, I.

    1987-01-01

    The collection of papers presented at the training of food industry specialists contains 14 papers, of which 3 were incorporated in INIS. All deal with the radiation treatment of foods and feeds, various equipment and technologies used for the purpose, major radiation effects and the advantages of irradiation techniques. Also discussed are adverse effects of radiation on foodstuffs, questions of legislation and future prospects. (M.D.)

  8. Desenvolvimento de uma salada de frutas: da pesquisa de mercado à tecnologia de alimentos Fruit salad development: from market research to food technology

    Directory of Open Access Journals (Sweden)

    Wilton Soares Cardoso

    2010-06-01

    Full Text Available O entendimento das necessidades dos clientes e a utilização de tecnologia dos alimentos podem tornar uma ideia em um produto inovador. O objetivo deste trabalho foi estudar, por meio de uma pesquisa de mercado, a oportunidade de um novo produto e, posteriormente, elaborar uma salada de frutas frescas, utilizando técnicas de processamento mínimo com métodos combinados. A pesquisa de mercado foi realizada na região metropolitana de Belo Horizonte - MG para estudar o mercado potencial e avaliar a aceitação de uma salada de frutas pronta e embalada. No processo de desenvolvimento do produto, foram selecionadas três formulações, para avaliação sensorial, avaliadas a cada sete dias, durante 21 dias de armazenamento. Na análise de mercado, o produto salada de frutas foi aprovado, enquanto ideia, sendo considerada como ótima e original. Os clientes potenciais se apresentam como abertos a novidades de mercado e a novas marcas. Considera ainda como atributos de decisão de compra, em ordem de prioridade: preço, referência, necessidade, composição e ingredientes, valores nutricionais. No desenvolvimento da salada de frutas, todos os três tipos foram aceitos em análise sensorial com até 21 dias de armazenamento.Understanding the customers' needs and the use of food technology can make an idea become an innovative product. The goals of this study were to investigate, through a market research, the opportunity for a new product, and, subsequently, prepare an acceptable and fresh ready-to-eat fruit salad using minimal processing and combined methods. The market research was carried out in the metropolitan region of Belo Horizonte - MG, Brazil to study the potential market and to assess the market opportunities for a packed, ready-to eat fruit salad. After the development of the product, three types of fruit salad were prepared and a sensory evaluation was carried out every seven days during 21 days of storage. The market research revealed

  9. Australian International Food Security Research Centre | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Australian International Food Security Research Centre. Australian International Food Security Research Centre. http://aciar.gov.au/AIFSC. Cultivate Africa's Future. The Cultivate Africa's Future research partnership is designed to support applied research to combat hunger in sub-Saharan Africa by harnessing the potential ...

  10. Acceptance and marketability of the food irradiation technology

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1985-01-01

    The food irradiation technology has been struggling for forty years for acceptance and utilization. The issue of consumer acceptance is addressed and judged not to be the critical factor in terms of priority and timing. The producing/processing marketing industries must first accept the technology for valid business or social reasons. If they become convinced that they cannot afford to pass up the technology, they will accept the process and offer irradiated products. These industries understand public acceptance and use professionals in market development and advertising to achieve consumption of their products. Consumer acceptance can best be developed by the food industry, while the research and development community, in concert with national and international agencies, can and should provide the industry with every assistance in reaching a consensus on the validity of food irradiation as an appropriate and useful technology

  11. Investigation of food irradiation technology for application to plant quarantine. Working group report of food irradiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Sunaga, Hiromi; Ito, Hitoshi; Takatani, Yasuyuki; Takizawa, Haruki; Yotsumoto, Keiichi; Tanaka, Ryuichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Hirano, Tsuyoshi; Tokunaga, Okihiro

    1999-06-01

    The commercialization of food irradiation in Japan was started in 1973 for the sprout inhibition of potatoes as the first successful food irradiation facility in the world. Since approval of potato irradiation, no items has been commercialized in Japan. However, international agreement for phase out of methyl bromide after 2005 and increasing incidences of foodborn diseases such as by Escherichia coli O157:H7 are forcing to have interesting to food irradiation. Takasaki Radiation Chemistry Research Establishment has long experiences on research of irradiation effect and engineering of food irradiation in Japan. From these back ground, working group of food irradiation was organized at August 1997 by some members of Department of Radiation Research for Environment and Resources and Advanced Technology Center for supporting technically on commercialization of food irradiation. This report presents the result of discussion in working group on generalization up to date researches of food irradiation, application fields and items, technical problems and future prospects of this technology in Japan. (author)

  12. Research on organic food purchase in Croatia

    Directory of Open Access Journals (Sweden)

    Kristina Petljak

    2011-12-01

    Full Text Available This paper presents research findings based on the research conducted on a representative sample of respondents using a highly structured questionnaire. The first part of the paper focuses on the theoretical background and overview of the research results related to the research problem in the world and in Croatia. The results of the research which has been conducted indicate that respondents are not familiar with the definition of organic food. Furthermore, the paper elaborates on the Croatian consumers’ perception of organic food and conventional food. The research on organic food purchase places a special emphasis on regular buyers of organic food who were asked to evaluate the importance of individual characteristics in choosing a place of sale for organic food. Based on the hierarchical regression analysis, the frequency of organic food purchases by regular buyers was found to correlate with the perception of organic food and the importance of characteristics of a place of sale for organic food. The research also identified the main reasons for not buying organic food, and it sets out the guidelines which may be useful to organic producers, marketers and retailers in encouraging further purchases of organic food.

  13. Advanced Food Technology Workshop Report. Volumes 1 and 2

    Science.gov (United States)

    Perchonok, Michele

    2003-01-01

    The Advanced Human Support Technology (AHST) Program conducts research and technology development to provide new technologies and next-generation system that will enable humans to live and work safely and effectively in space. One program element within the AHST Program is Advanced Life Support (ALS). The goal of the ALS program element is to develop regenerative life support systems directed at supporting National Aeronautics and Space Administration's (NASA) future long-duration missions. Such missions could last from months to years and make resupply impractical, thereby necessitating self-sufficiency. Thus, subsystems must be developed to fully recycle air and water, recover resources from solid wastes grow plants, process raw plant products into nutritious and palatable foods, control the thermal environment, while reducing the overall system mass. ALS systems will be a combination of physico-chemical and biological components depending on the specific mission requirements. In the transit vehicle, the food system will primarily be a prepackaged food system with the possible addition of salad crops that can be picked and eaten with limited preparation. On the lunar or planetary evolved base, the food system will be a combination of the prepackaged menu item and ingredients that are processed from the grown crops. Food processing and food preparation will be part of this food system.

  14. Consumer Value perceptions of food products from emerging processing technologies

    DEFF Research Database (Denmark)

    Perrea, Toula; Grunert, Klaus G; Krystallis Krontalis, Athanasios

    2015-01-01

    Through a qualitative research approach, the present paper aims to explore the range and type of ‘values’ and ‘costs’ in formulating overall Consumer Value (CV) perceptions, in association with two emerging processing technologies that at the outset are neither distinctly positive nor negative...... in the eyes of consumers, in two culturally variant contexts, namely a Western society where technology is often met with skepticism (i.e., the UK); and a non-Western society where technology plays a reassuring role regarding concerns about food safety and quality (i.e., China). Results reveal that the most......-technology counterparts, who ‘allow’ more room for cultural discrepancies to impact on their CV perceptions. Overall, findings support the view that CV perceptions in the context of food produced by means of emerging processing technologies can be successfully analyzed using a multidimensional conceptualization, where CV...

  15. Nuclear Technologies Secure Food For Future

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: For nearly fifty years, applications of nuclear technology have been helping the world's farmers, contributing new varieties of crops, controlling pests, diagnosing livestock disease, improving soil and water management and increasing food safety. The significant role of nuclear technology in supporting agriculture will be the focus of this year's IAEA Scientific Forum in Vienna on 18-19 September. Food for the Future: Meeting the Challenges with Nuclear Applications is the theme of the Forum, which takes place during the annual IAEA General Conference. ''Demand for food is rising significantly as the world's population grows,'' IAEA Director General Yukiya Amano said. ''Fighting hunger is a key priority. It is essential not only that the world should produce more food. We must also protect crops and livestock and make sure that food is safe to eat. Nuclear applications can make a real difference in all of these areas.'' ''The goal of the Scientific Forum is to make Member States more aware of the very important work of the IAEA in nuclear applications related to food and to encourage more countries to make use of our services.'' Nuclear technology has many possible uses in food and agriculture. By irradiation, scientists can accelerate natural spontaneous mutation and improve crop varieties to suit particular conditions. Farmers are benefitting from rice that grows in salty conditions, barley that flourishes above 4 000 metres (13 000 feet) and hundreds of other crop varieties. The use of the sterile insect technique, in which males of a targeted species such as the tsetse fly or the Mediterranean fruit fly are sterilised by radiation and released into the wild, is expanding significantly. This effectively combats insect pests that damage crops and spread disease among humans and livestock, while limiting pesticide use. The world was last year declared free of the deadly cattle disease rinderpest after a campaign made possible by nuclear techniques. The

  16. Rethinking Research for Genetically Modified (GM) Food

    OpenAIRE

    Yin-Ling; Lin

    2012-01-01

    This paper suggests a rethinking of the existing research about Genetically Modified (GM) food. Since the first batch of GM food was commercialised in the UK market, GM food rapidly received and lost media attention in the UK. Disagreement on GM food policy between the US and the EU has also drawn scholarly attention to this issue. Much research has been carried out intending to understand people-s views about GM food and the shaping of these views. This paper was based o...

  17. Scenario research: The food industry in 2010

    OpenAIRE

    Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

    2001-01-01

    What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to ide...

  18. Contemporary food technology and its impact on cuisine.

    Science.gov (United States)

    Lupien, John R; Lin, Ding Xiao

    2004-01-01

    This article contains a general review of current food technologies and their effect on the quality and safety of foods. The uses of these technologies in the context of current and projected world population, urbanization prevention of food losses, preservation and trade of foods, domestically and internationally are briefly reviewed. Technologies discussed are related to food storage, refrigeration, frozen foods, milling and baking, canning, pickling, extrusion processes, fermentation, and to foods and food ingredients such as fruits and vegetables, animal products, fat and oils, canned products, and food additives.

  19. Ames Research Center Research and Technology 2000

    Science.gov (United States)

    2002-01-01

    This report highlights the challenging work accomplished during fiscal year 2000 by Ames research scientists,engineers, and technologists. It discusses research and technologies that enable the Information Age, that expand the frontiers of knowledge for aeronautics and space, and that help to maintain U.S. leadership in aeronautics and space research and technology development. The accomplishments are grouped into four categories based on four of NASA's Strategic Enterprises: Aerospace Technology, Space Science, Biological and Physical Research, and Earth Science. The primary purpose of this report is to communicate knowledge-to inform our stakeholders, customer, and partners, and the people of the United States about the scope and diversity of Ames' mission,the nature of Ames' research and technolog) activities,and the stimulating challenges ahead. The accomplishments cited illustrate the contributions that Ames is willing to improve the quality of life for our citizens and the economic position of the United States in the world marketplace.

  20. Canadian International Food Security Research Fund (CIFSRF ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Canadian International Food Security Research Fund (CIFSRF). The Canadian International Food Security Research Fund (CIFS-RF) is a collaborative program of the Canadian International Development Agency (CIDA) and IDRC valued at CA $61 654 707 (CIDA: CA $50 000 000; IDRC: CA $11 654 707). The program ...

  1. Research award: Food, Environment, and Health | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-09-06

    Sep 6, 2017 ... ... skills and gain a fresh perspective on crucial development issues. ... food systems research and interventions in low- and middle-income countries. ... the research award recipient will contribute to the management of the ...

  2. Canadian International Food Security Research Fund (CIFSRF)

    International Development Research Centre (IDRC) Digital Library (Canada)

    . The Canadian International Food Security Research Fund(CIFSRF) is a program of Canada's International Development Research. Centre (IDRC) undertaken with the financial support of the. Government of Canada provided through Foreign ...

  3. Development of food irradiation technology and consumer attitude toward irradiated food in Korea

    International Nuclear Information System (INIS)

    Kwon, Joong-Ho; Byun, Myung-Woo; Cho, Han-Ok

    1992-01-01

    In Korea, the well-integrated research of biological effects of radiation has been launched from the late 1960s. As research activities, the following food items have been dealt with: sprouting foods, fruits, mushrooms, grains, spices or mixed condiments, fish or fishery products, meat or meat products, and fermented foods. The usage of gamma radiation from 60 Co source is now authorized for food irradiation of the following items: potato, onion, garlic, chestnut, mushroom, dried mushroom, dried spices (including red pepper, garlic, black pepper, onion, ginger, and green onion), dried meat, powdered fish and shellfish, soybean paste powder, hot pepper paste powder, soybean sauce powder, and starch. Since the authorization of food irradiation in 1985, consumers' acceptance has been considered the most important. The survey evaluating the basic perception and attitule toward food irradiation revealed the following results. Consumers' awareness of food irradiation was 82%, with significantly higher in radiation workers than the general public (p<0.0001). Seventy-five percent distinguished the contaminated food by radionuclides from irradiated food. In purchasing irradiated foods, 50.9% required more information. The contribution of irradiated foods to wholesomeness was suspicious in 51%, acceptable in 33%, and uncertain in 16%. If information about the benefits of irradiation is provided to consumers, positive response was increased to 60%. The most critical impediment in the commercial application of food irradiation was found to have resulted from the general consumers' slow acceptance; however, consumers' attitude to irradiated food became positive if they understood the safety and advantages of this technology. The most important task is to overcome consumers' psychological resistance and transporting matters of the products to be irradiated. (N.K.)

  4. Advanced research technology transfer

    International Nuclear Information System (INIS)

    Naraghi, Masud

    1977-01-01

    The importance of advanced research in the less developed countries of the world is described. Advanced research is a way of building from the top; it helps industrial development; it provides ''know-how'' economically; it enhances international understanding; it prevents the brain drain to developed countries and is of mutual benefit. The problems concerned with this type of research are pointed out

  5. Scenario research: The food industry in 2010

    DEFF Research Database (Denmark)

    Stacey, Julia; Sonne, Anne-Mette; Jensen, Birger Boutrup

    2001-01-01

    What kind of foods will the consumers choose to buy in 2010? Will they be buying organic foods, functional foods or go for the cheapest products? Nobody can predict the future. However, by using scenario techniques qualified indications on future developments can be put together. Researchers...... at MAPP and the Department of Manufacturing Engineering and Management, The Technical University of Denmark have constructed three scenarios about the Danish food industry in 2010. The aim has been to identify the demands the food industry can expect to meet in the future plus which research areas...... the public research should prioritise in order to support the development of competences within the food industry. The scenarios are isolated developments. In practise, the future is likely to be a combination of the different tendencies within the scenarios. The first scenario 'Naturalness' has focus...

  6. Learning by cases in food technology

    DEFF Research Database (Denmark)

    Løje, Hanne

    2012-01-01

    The purpose of this paper is to evaluate the use of the method learning by cases for teaching food technology students at the technical university of Denmark (DTU) and to clarify if the method can be used to improve the motivation and make the students more active and thereby be more in control...... of their own learning process, to feel more secure and less frustrated. The applying of the learning by cases method at the food technology course can make the students to learn in a significantly way, where they will be more actively involved in the learning process than previous. The work with real life...... cases with engineering topics, can develop the students knowledge and understanding, which gives the students a more conceptual understanding of engineering tasks, and can improve their skills to analyze and deal with complex situations and furthermore to be more confident with the course curriculum....

  7. The status of food irradiation technology

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1989-01-01

    Irradiation is a mature technology for many uses, such as medical product sterilization, crosslinking of plastics, application of coatings, stabilization of natural and synthetic rubbers prior to vulcanization, and in plant genetics. It also has many potential applications in the food and agriculture industries, especially in the postharvest activities associated with processing, storing, and distribution and in utilization and consumption. The safety of food irradiation has been thoroughly studied and established by distinguished scientists of international stature and unimpeachable credentials. Approximately 30 countries permit food irradiation and it is commercially used in 21. Parasites are of serious concern since their impact on human health and economic productivity is significant, especially in developing countries with sanitation and food control problems. Parasites in meat and fish can be rendered sterile or inactivated with irradiation, and the potential for improved human health is significant. The second area for immediate use of irradiation is in meeting plant quarantine requirements. The benefits described above and the approval of the scientific community are moving the technology toward greater utilization

  8. Novel approaches in food-processing technology: new technologies for preserving foods and modifying function.

    Science.gov (United States)

    Knorr, D

    1999-10-01

    Recent advances in emerging food-processing technologies, such as high hydrostatic pressure or high-intensity electric field pulses, allow targeted and sophisticated modification and preservation of foods. We are beginning to understand the mechanisms involved in pressure inactivation of bacterial spores and have been collecting considerable amounts of kinetic data regarding inactivation mechanisms of enzymes and vegetative microorganisms. We are also gaining more insight into the permeabilization of plant membranes and related biosynthetic responses, making progress in food structure engineering and food modification for function, and have been initiating process developments for gentle processing of delicate biomaterials based on pressure-assisted phase transitions of water.

  9. Modifications of allergenicity linked to food technologies.

    Science.gov (United States)

    Moneret-Vautrin, D A

    1998-01-01

    The prevalence of food allergies (FA) has increased over the past fifteen years. The reasons suggested are changes in dietary behaviour and the evolution of food technologies. New cases of FA have been described with chayote, rambutan, arguta, pumpkin seeds, custard apple, and with mycoproteins from Fusarium.... Additives using food proteins are at high risk: caseinates, lysozyme, cochineal red, papaïn, alpha-amylase, lactase etc. Heating can reduce allergenicity or create neo-allergens, as well as storage, inducing the synthesis of allergenic stress or PR proteins. Aeroallergens (miles, moulds) contaminate foods and can induce allergic reactions. Involuntary contamination by peanut proteins on production lines is a problem which is not yet solved. Genetically modified plants are at risk of allergenicity, requiring methodological steps of investigations: the comparison of the amino-acid sequence of the transferred protein with the sequence of known allergens, the evaluation of thermo degradability and of the denaturation by pepsin and trypsin are required, as well as the study with sera from patients allergic to the plant producing the gene. The combination of enzymatic hydrolysis, heating, or the development of genetically modified plants may offer new alternatives towards hypoallergenic foods (57 references).

  10. Liquid sodium technology research

    International Nuclear Information System (INIS)

    Kim, W.C.; Lee, Y.W.; Nam, H.Y.; Chun, S.Y.; Kim, J.; Won, S.Y.

    1982-01-01

    This report describes the technology of impurity control and measurement of liquid sodium, problems associated with material degradation and change of heat transfer characteristics in liquid sodium, and the conceptual design of multipurpose sodium test loop. Discussion and the subsequent analysis are also made with regard to the test results for the sodium-H 2 0 reaction and its effects on the system. (author)

  11. Food product tracing technology capabilities and interoperability.

    Science.gov (United States)

    Bhatt, Tejas; Zhang, Jianrong Janet

    2013-12-01

    Despite the best efforts of food safety and food defense professionals, contaminated food continues to enter the food supply. It is imperative that contaminated food be removed from the supply chain as quickly as possible to protect public health and stabilize markets. To solve this problem, scores of technology companies purport to have the most effective, economical product tracing system. This study sought to compare and contrast the effectiveness of these systems at analyzing product tracing information to identify the contaminated ingredient and likely source, as well as distribution of the product. It also determined if these systems can work together to better secure the food supply (their interoperability). Institute of Food Technologists (IFT) hypothesized that when technology providers are given a full set of supply-chain data, even for a multi-ingredient product, their systems will generally be able to trace a contaminated product forward and backward through the supply chain. However, when provided with only a portion of supply-chain data, even for a product with a straightforward supply chain, it was expected that interoperability of the systems will be lacking and that there will be difficulty collaborating to identify sources and/or recipients of potentially contaminated product. IFT provided supply-chain data for one complex product to 9 product tracing technology providers, and then compared and contrasted their effectiveness at analyzing product tracing information to identify the contaminated ingredient and likely source, as well as distribution of the product. A vertically integrated foodservice restaurant agreed to work with IFT to secure data from its supply chain for both a multi-ingredient and a simpler product. Potential multi-ingredient products considered included canned tuna, supreme pizza, and beef tacos. IFT ensured that all supply-chain data collected did not include any proprietary information or information that would otherwise

  12. Recent Advances in Food Processing Using High Hydrostatic Pressure Technology.

    Science.gov (United States)

    Wang, Chung-Yi; Huang, Hsiao-Wen; Hsu, Chiao-Ping; Yang, Binghuei Barry

    2016-01-01

    High hydrostatic pressure is an emerging non-thermal technology that can achieve the same standards of food safety as those of heat pasteurization and meet consumer requirements for fresher tasting, minimally processed foods. Applying high-pressure processing can inactivate pathogenic and spoilage microorganisms and enzymes, as well as modify structures with little or no effects on the nutritional and sensory quality of foods. The U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) have approved the use of high-pressure processing (HPP), which is a reliable technological alternative to conventional heat pasteurization in food-processing procedures. This paper presents the current applications of HPP in processing fruits, vegetables, meats, seafood, dairy, and egg products; such applications include the combination of pressure and biopreservation to generate specific characteristics in certain products. In addition, this paper describes recent findings on the microbiological, chemical, and molecular aspects of HPP technology used in commercial and research applications.

  13. Minimally Processed Functional Foods: Technological and Operational Pathways.

    Science.gov (United States)

    Rodgers, Svetlana

    2016-10-01

    This paper offers a concise review of technical and operational concepts underpinning commercialization of minimally processed functional foods (FFs), foods with fresh-like qualities commanding premium prices. The growing number of permitted nutritional content/health claims, many of which relate to well-being, coupled with emerging extraction and food processing technologies offers new exciting opportunities for small and medium size enterprises (SMEs) specializing in fresh produce to play an active role in the health market. Supporting SMEs, governments could benefit from savings in healthcare costs and value creation in the economy. Consumers could benefit from novel FF formats such as refrigerated RTE (ready-to-eat) meals, a variety of fresh-like meat-, fish-, and egg-based products, fresh-cut fruits and vegetables, cereal-based fermented foods and beverages. To preserve these valuable commodities, mild biological (enzymatic treatment, fermentation and, bio-preservation) and engineering solutions are needed. The latter include nonthermal techniques such as high-pressure treatment, cook-chill, sous-vide, mirco-encapsulation, vacuum impregnation and others. "De-constructive" culinary techniques such as 3D food printing and molecular gastronomy as well as developments in nutrigenomics and digital technologies facilitate novel product formats, personalization and access to niche markets. In the operational sense, moving from nourishment to health improvement demands a shift from defensive market-oriented to offensive market-developing strategies including collaborative networks with research organizations. © 2016 Institute of Food Technologists®.

  14. The prospect of nuclear application in food technology

    International Nuclear Information System (INIS)

    Maha, Munsiah

    1982-01-01

    Irradiation changes the normal living process of cells and the structure of molecules. It is good for food preservation because it kills off many of the microorganisms in the product and makes the remainder more sensitive to antimicrobial factors prevailing after the radiation treatment. It offers more benefits than conventional preservation in that it increases storage stability and quality of foodstuffs with the minimum use of energy. Good storage quality gives way to wider distribution of food, alleviates the world's food shortage, and improves food supplies. Research proved that irradiation increased the quality of subtropical fruits, spices, fish, and meat. No refrigeration is needed to store meat, poultry and fish preserved by the combination of irradiation and mild heat treatment. Nuclear technology can also be applied to destroy harmful insects, to sterilize food, to inhibit the sprouting of root crops, and to control ripening in stored fruits and vegetables. Based on the above potentials of irradiation, the prospect of nuclear application in food technology is promising. (RUW)

  15. Intelligent food packaging - research and development

    Directory of Open Access Journals (Sweden)

    Renata Dobrucka

    2015-03-01

    Full Text Available Packaging also fosters effective marketing of the food through distribution and sale channels. It is of the utmost importance to optimize the protection of the food, a great quality and appearance - better than typical packaged foods. In recent years, intelligent packaging became very popular. Intelligent packaging is becoming more and more widely used for food products. Application of this type of solution contributes to improvement of the quality consumer life undoubtedly. Intelligent packaging refers to a package that can sense environmental changes, and in turn, informs the users about the changes. These packaging systems contain devices that are capable of sensing and providing information about the functions and properties of the packaged foods. Also, this paper will review intelligent packaging technologies and describe different types of indicators (time-temperature indicators, freshness indicators.

  16. Research and technology highlights, 1993

    Science.gov (United States)

    1994-01-01

    This report contains highlights of the major accomplishments and applications that have been made by Langley researchers and by our university and industry colleagues during the past year. The highlights illustrate both the broad range of the research and technology activities supported by NASA Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research. This report also describes some of the Center's most important research and testing facilities.

  17. MBR Technology: future research directions

    NARCIS (Netherlands)

    Brouwer, H.; Temmink, B.G.; Remy, M.J.J.; Geilvoet, S.

    2005-01-01

    Cutting down the operational costs of MBR technology will be the key driver for research. This article outlines some research areas and specific topics that potentially will contribute to lower costs. Special attention to these topics should be given the coming years. Long term research should focus

  18. Canadian International Food Security Research Fund | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Canadian International Food Security Research Fund (CIFSRF) invests in scaling up ... for farming families, and improve nutrition throughout the Global South. ... universities, civil society organizations, governments, and the private sector, ...

  19. Research and technology, 1991. Langley Research Center

    Science.gov (United States)

    1992-01-01

    The mission of the NASA Langley Research Center is to increase the knowledge and capability of the United States in a full range of aeronautics disciplines and in selected space disciplines. This mission will be accomplished by performing innovative research relevant to national needs and Agency goals, transferring technology to users in a timely manner, and providing development support to other United States Government agencies, industry, and other NASA centers. Highlights are given of the major accomplishments and applications that have been made during the past year. The highlights illustrate both the broad range of the research and technology (R&T) activities at NASA Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research.

  20. Nigerian Journal of Technological Research

    African Journals Online (AJOL)

    The Nigerian Journal of Technological Research is a pure scientific journal with a philosophy of attempting to provide information on problem solving technology to its immediate environs and the international community. The scope of the journal is in the core areas of: Pure and Applied Sciences; Engineering Sciences; ...

  1. Research Award: Agriculture and Food Security

    International Development Research Centre (IDRC) Digital Library (Canada)

    Corey Piccioni

    2013-08-07

    Aug 7, 2013 ... research awards providing a unique opportunity to enhance research skills and gain a fresh perspecve on crucial development issues. These one‐year, paid, ... programming through a research acvity focusing on agriculture and food security, specifically on the gender and social (equity) dimensions of ...

  2. Modeling of processing technologies in food industry

    Science.gov (United States)

    Korotkov, V. G.; Sagitov, R. F.; Popov, V. P.; Bachirov, V. D.; Akhmadieva, Z. R.; TSirkaeva, E. A.

    2018-03-01

    Currently, the society is facing an urgent need to solve the problems of nutrition (products with increased nutrition value) and to develop energy-saving technologies for food products. A mathematical modeling of heat and mass transfer of polymer materials in the extruder is rather successful these days. Mathematical description of movement and heat exchange during extrusion of gluten-protein-starch-containing material similar to pasta dough in its structure, were taken as a framework for the mathematical model presented in this paper.

  3. Nuclear technology in research and everyday life

    International Nuclear Information System (INIS)

    2015-12-01

    The paper.. discusses the impact of nuclear technology in research and everyday life covering the following issues: miniaturization of memory devices, neutron radiography in material science, nuclear reactions in the universe, sterilization of food, medical applies, cosmetics and packaging materials using beta and gamma radiation, neutron imaging for radioactive waste analysis, microbial transformation of uranium (geobacter uraniireducens), nuclear technology knowledge preservation, spacecrafts voyager 1 and 2, future fusion power plants, prompt gamma activation analysis in archeology, radiation protection and radioecology and nuclear medicine (radiotherapy).

  4. The Regulation of Food Science and Technology Professions in Europe

    Directory of Open Access Journals (Sweden)

    Rui Costa

    2014-04-01

    Full Text Available The regulation of a profession is justified when it improves consumer protection and public health. Higher education food science and technology (FST degrees, widely offered in many universities in Europe open to a wide range of jobs in the food sectors where the employees could cover different positions, roles and carry out diverse activities dealing with the food production and the quality and safety of the food products. This work reviews the state of the art of the FST regulated professions requiring higher education qualifications in the European countries. The research was carried out by collecting specific information on regulated professions by contacting unions, professional associations, public servant categories/professions, and by visiting national and EU websites.  The data collected for each regulated profession were: country, training/education required, date of implementation of regulation, professional training (if required, capability test (if required and acts required by law to be signed by a regulated professional. Only professions that required a higher education diploma were included in this search. Few countries were found to have a regulated profession in FST, in particular: Food Engineering (Turkey, Food Technologist (Greece, Iceland, Italy and Slovenia, and Oenologist (Italy, Portugal and Spain. FST regulated professions in Europe are thus scarce and have a rather limited history. The Food Technologist in Italy and the Food Engineer in Turkey were found to be the only completely regulated professions found in Europe. Food and professional regulation have been evolved over the years and raised the debate on the regulation of FST professions. Academia as well as other policymakers has to further contribute to this discussion to keep high the standards for quality of education and training of the qualified workforce and professionals in the food sector.

  5. Automatic food detection in egocentric images using artificial intelligence technology.

    Science.gov (United States)

    Jia, Wenyan; Li, Yuecheng; Qu, Ruowei; Baranowski, Thomas; Burke, Lora E; Zhang, Hong; Bai, Yicheng; Mancino, Juliet M; Xu, Guizhi; Mao, Zhi-Hong; Sun, Mingui

    2018-03-26

    To develop an artificial intelligence (AI)-based algorithm which can automatically detect food items from images acquired by an egocentric wearable camera for dietary assessment. To study human diet and lifestyle, large sets of egocentric images were acquired using a wearable device, called eButton, from free-living individuals. Three thousand nine hundred images containing real-world activities, which formed eButton data set 1, were manually selected from thirty subjects. eButton data set 2 contained 29 515 images acquired from a research participant in a week-long unrestricted recording. They included both food- and non-food-related real-life activities, such as dining at both home and restaurants, cooking, shopping, gardening, housekeeping chores, taking classes, gym exercise, etc. All images in these data sets were classified as food/non-food images based on their tags generated by a convolutional neural network. A cross data-set test was conducted on eButton data set 1. The overall accuracy of food detection was 91·5 and 86·4 %, respectively, when one-half of data set 1 was used for training and the other half for testing. For eButton data set 2, 74·0 % sensitivity and 87·0 % specificity were obtained if both 'food' and 'drink' were considered as food images. Alternatively, if only 'food' items were considered, the sensitivity and specificity reached 85·0 and 85·8 %, respectively. The AI technology can automatically detect foods from low-quality, wearable camera-acquired real-world egocentric images with reasonable accuracy, reducing both the burden of data processing and privacy concerns.

  6. School of Culinary Arts & Food Technology - Spring Newsletter 2017

    OpenAIRE

    Murphy, James Peter

    2017-01-01

    The School of Culinary Arts and Food Technology, Spring Newsletter captured the many events, research, awards, significant contributions and special civic and community activities which the students and staff members of the school have successfully completed leading up to the Spring period of 2017. The successful completion of these activities would not be possible without the active and on-going support of the 'INSPIRED' friends of Culinary Arts (sponsors).

  7. School of Culinary Arts & Food Technology - Summer Newsletter 2017

    OpenAIRE

    Murphy, James Peter

    2017-01-01

    The School of Culinary Arts and Food Technology, Summer Newsletter captured rfgw many events, research, awards, significant contributions ans special civic and community activities which the students and staff members of the school have successfully completed leading up to the summer period of 2017. These activities could not be completed without the on-going and active support of the schools 'INSPIRED' friends of Culinary Arts (sponsors).

  8. School of Culinary Arts & Food Technology - Summer Newsletter 2018

    OpenAIRE

    Murphy, James Peter

    2018-01-01

    The School of Culinary Arts and Food Technology, Summer Newsletter captured the many events, research, awards, significant contributions and special civic and community activities which the students and staff members of the school have successfully completed up to the Summer period of 2018. The successful completion of these activities would not be possible without the active and on-going support of the 'INSPIRED' friends of Culinary Arts (school sponsors).

  9. School of Culinary Arts & Food Technology - Winter Newsletter 2017

    OpenAIRE

    Murphy, James Peter

    2017-01-01

    The School of Culinary Arts and Food Technology, Winter Newsletter captured the many events, research, awards, significant contributions and special civic and community activities which the students and staff members of the school have successfully completed leading up to the Winter period of 2017. The successful completion of these activities would not be possible without the active and on-going support of the 'INSPIRED' Friends of Culinary Arts (sponsors).

  10. Energy research and energy technology

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Research and development in the field of energy technologies was and still is a rational necessity of our time. However, the current point of main effort has shifted from security of supply to environmental compatibility and safety of the technological processes used. Nuclear fusion is not expected to provide an extension of currently available energy resources until the middle of the next century. Its technological translation will be measured by the same conditions and issues of political acceptance that are relevant to nuclear technology today. Approaches in the major research establishments to studies of regenerative energy systems as elements of modern energy management have led to research and development programs on solar and hydrogen technologies as well as energy storage. The percentage these systems might achieve in a secured energy supply of European national economies is controversial yet today. In the future, the Arbeitsgemeinschaft Grossforschungseinrichtungen (AGF) (Cooperative of Major Research Establishments) will predominantly focus on nuclear safety research and on areas of nuclear waste disposal, which will continue to be a national task even after a reorganization of cooperation in Europe. In addition, they will above all assume tasks of nuclear plant safety research within international cooperation programs based on government agreements, in order to maintain access for the Federal Republic of Germany to an advancing development of nuclear technology in a concurrent partnership with other countries. (orig./HSCH) [de

  11. Demand-side constraints on the introduction of new food technologies: the case of food irradiation

    International Nuclear Information System (INIS)

    Henson, S.

    1995-01-01

    This paper explores the factors influencing consumer acceptance of new food technologies through an in-depth analysis of consumer reactions to food irradiation. Consumer acceptance/rejection of innovative food technologies is the result of a complex decision-making process which involves an assessment of the perceived risks and benefits associated with the new technology and existing alternatives. The acceptance of a new food technology is not simply related to the characteristics of the process itself, but also the needs, beliefs and attitudes of individual food consumers and the nature of the economic, political and social environment in which food choices take place. Consequently, it is difficult to make generalisations about consumer acceptance/rejection of particular food technologies. Therefore, strategies aimed at improving the rate at which such technologies are adopted must address a wide range of issues relating to the technology itself and the food system into which it is introduced

  12. User research & technology, pt.2

    CERN Document Server

    Greifeneder, Elke

    2011-01-01

    This e-book is Part 2 on the theme "User Research and Technology". The research covers the testing of online digital library resources using various methods. Library and information science as a field is changing and the requirements for top quality research are growing more stringent. This is typical of the experience of other professional fields as they have moved from practitioners advising practitioners to researchers building on past results. This e-book contains 12 papers on this theme.

  13. Nanoscience and nanotechnologies in food industries: opportunities and research trends

    Science.gov (United States)

    Ranjan, Shivendu; Dasgupta, Nandita; Chakraborty, Arkadyuti Roy; Melvin Samuel, S.; Ramalingam, Chidambaram; Shanker, Rishi; Kumar, Ashutosh

    2014-06-01

    Nanomaterials have gained importance in various fields of science, technology, medicine, colloid technologies, diagnostics, drug delivery, personal care applications and others due to their small size and unique physico-chemical characteristic. Apart from above mentioned area, it is also extensively being used in food sector specifically in preservation and packaging. The future applications in food can also be extended to improve the shelf life, food quality, safety, fortification and biosensors for contaminated or spoiled food or food packaging. Different types and shapes of nanomaterials are being employed depending upon the need and nature of the food. Characterisation of these nanomaterials is essential to understand the interaction with the food matrix and also with biological compartment. This review is focused on application of nanotechnology in food industries. It also gives insight on commercial products in market with usage of nanomaterials, current research and future aspects in these areas. Currently, they are being incorporated into commercial products at a faster rate than the development of knowledge and regulations to mitigate potential health and environmental impacts associated with their manufacturing, application and disposal. As nanomaterials are finding new application every day, care should be taken about their potential toxic effects.

  14. Application of food irradiation technology in development of future special purposed foods

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Shin, Myung Gon [Woosong University, Daejeon (Korea, Republic of); Lee, Ju Woon [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2010-06-15

    Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry.

  15. Application of food irradiation technology in development of future special purposed foods

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Shin, Myung Gon; Lee, Ju Woon

    2010-01-01

    Advanced food technologies fused with radiation technology could be applied to the development of various special-purpose foods such space foods, combat rations, emergency foods, and sterile patient meals. In U.S.A, the National Aeronautics and Space Administration and the U.S. Army Natick Soldier RD and E Center co-developed the hazard analysis of critical control point, which is a essential hygienic control system in food industry. Moreover, strict manufacturing standards to produce shelf-stable foods using radiation (ionizing energy) technology were established. In Korea, the advanced food technologies to sterilize various foods using irradiation technology were expected to be applied as a hygiene process on group meals and ready-to-eat/ready-to cook foods, and to produce foods for patients with high hygienic, nutritional, and organoleptic qualities through the combination treatments with irradiation technology. And, it was considered that the advanced technology would improve the related industries and national economy by introducing the food irradiation technology to the Korean traditional fermented foods to improve their functionality. In conclusion, the advanced food technologies which are preoccupied by some developed countries like U.S.A. and Russia will make a contribution to the development of national science and technology, and competitiveness promotion of industry

  16. Fingerprinting food: current technologies for the detection of food adulteration and contamination.

    Science.gov (United States)

    Ellis, David I; Brewster, Victoria L; Dunn, Warwick B; Allwood, J William; Golovanov, Alexander P; Goodacre, Royston

    2012-09-07

    Major food adulteration and contamination events seem to occur with some regularity, such as the widely publicised adulteration of milk products with melamine and the recent microbial contamination of vegetables across Europe for example. With globalisation and rapid distribution systems, these can have international impacts with far-reaching and sometimes lethal consequences. These events, though potentially global in the modern era, are in fact far from contemporary, and deliberate adulteration of food products is probably as old as the food processing and production systems themselves. This review first introduces some background into these practices, both historically and contemporary, before introducing a range of the technologies currently available for the detection of food adulteration and contamination. These methods include the vibrational spectroscopies: near-infrared, mid-infrared, Raman; NMR spectroscopy, as well as a range of mass spectrometry (MS) techniques, amongst others. This subject area is particularly relevant at this time, as it not only concerns the continuous engagement with food adulterers, but also more recent issues such as food security, bioterrorism and climate change. It is hoped that this introductory overview acts as a springboard for researchers in science, technology, engineering, and industry, in this era of systems-level thinking and interdisciplinary approaches to new and contemporary problems.

  17. Technology transfer from nuclear research

    International Nuclear Information System (INIS)

    1989-01-01

    A number of processes, components and instruments developed at the Bhabha Atomic Research Centre, (BARC), Bombay, find application in industry and are available for transfer to private or public sector undertakings for commercial exploitation. The Technology Transfer Group (TTG) constituted in January 1980 identifies such processes and prototypes which can be made available for transfer. This catalogue contains brief descriptions of such technologies and they are arranged under three groups, namely, Group A containing descriptions of technologies already transferred, Group B containing descriptions of technologies ready for transfer and Group C containing descriptions of technology transfer proposals being processed. The position in the above-mentioned groups is as on 1 March 1989. The BARC has also set up a Technology Corner where laboratory models and prototypes of instruments, equipment and components are displayed. These are described in the second part of the catalogue. (M.G.B.)

  18. Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

    Science.gov (United States)

    Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

    2017-03-01

    Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  19. Effect of Ultrasound Technology on Food and Nutritional Quality.

    Science.gov (United States)

    Ojha, Kumari S; Tiwari, Brijesh K; O'Donnell, Colm P

    2018-01-01

    Ultrasound technology has been successfully demonstrated for several food processing and preservation applications. The majority of food processing applications reported refer to liquid foods. Ultrasound has been applied to solid foods in some niche applications, e.g., tenderization of meat, mass transfer applications, and drying. Similar to any other technology, ultrasound also has some positive and negative effects on food quality depending on the application and processing conditions employed. This chapter outlines various applications of ultrasound to food and its effect on food and nutritional quality. © 2018 Elsevier Inc. All rights reserved.

  20. Development of space foods using radiation technology

    International Nuclear Information System (INIS)

    Lee, Ju-Woon; Byun, Myung-Woo; Kim, Jae-Hun; Song, Beom-Suk; Choi, Jong-IL; Park, Jin-Kyu; Park, Jae-Nam; Han, In-Jun

    2008-07-01

    Four Korean food items (Kimchi, ready-to-eat fermented vegetable; Ramen, ready-to-cook noodles; Nutrition bar, ready-to-eat raw grain bar; Sujeonggwa, cinnamon beverage) have been developed as space foods by the application of high-dose gamma irradiation. All Korean space foods were certificated for use in space flight conditions during 30 days by the Russian Institute of Biomedical Problems. Establishment of research protocols on muscle atrophy mechanism using two-dimensional electrophoresis and various blotting analyses are conducted. And two bio-active molecules that potentially play an preventive role of muscle atrophy are uncovered. Integrative protocols linking between the effect of bio-active molecules and treadmill exercise for muscle atrophy inhibition are established. Reduction in body temperature and heartbeat rate were monitored after HIT injection to mice was conducted. Development of Korean astronaut preferred flavoring for space food was conducted to reduced atherogenic index (AI) than butter fat. The spread added honey and pineapple essence was preferred spreadability and overall flavor by sensory evaluation. Flavor was affected by irradiation source (γ-ray or electron beam) or irradiation dosage (10, 20, 30, 40 and 50 kGy) using electronic nose system an space foods using gamma irradiation pH of porridge was mostly stable and pH increased. Most of TBARS value was generally low, and there wasn't any significant difference. Consistency, viscosity, and firmness was higher in round rice porridge and half rice porridge than in rice powder porridge, and increase in added water amount led to decrease of all textural properties

  1. Development of space foods using radiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju-Woon; Byun, Myung-Woo; Kim, Jae-Hun; Song, Beom-Suk; Choi, Jong-IL; Park, Jin-Kyu; Park, Jae-Nam; Han, In-Jun

    2008-07-15

    Four Korean food items (Kimchi, ready-to-eat fermented vegetable; Ramen, ready-to-cook noodles; Nutrition bar, ready-to-eat raw grain bar; Sujeonggwa, cinnamon beverage) have been developed as space foods by the application of high-dose gamma irradiation. All Korean space foods were certificated for use in space flight conditions during 30 days by the Russian Institute of Biomedical Problems. Establishment of research protocols on muscle atrophy mechanism using two-dimensional electrophoresis and various blotting analyses are conducted. And two bio-active molecules that potentially play an preventive role of muscle atrophy are uncovered. Integrative protocols linking between the effect of bio-active molecules and treadmill exercise for muscle atrophy inhibition are established. Reduction in body temperature and heartbeat rate were monitored after HIT injection to mice was conducted. Development of Korean astronaut preferred flavoring for space food was conducted to reduced atherogenic index (AI) than butter fat. The spread added honey and pineapple essence was preferred spreadability and overall flavor by sensory evaluation. Flavor was affected by irradiation source ({gamma}-ray or electron beam) or irradiation dosage (10, 20, 30, 40 and 50 kGy) using electronic nose system an space foods using gamma irradiation pH of porridge was mostly stable and pH increased. Most of TBARS value was generally low, and there wasn't any significant difference. Consistency, viscosity, and firmness was higher in round rice porridge and half rice porridge than in rice powder porridge, and increase in added water amount led to decrease of all textural properties.

  2. Minimising food waste: a call for multidisciplinary research.

    Science.gov (United States)

    Alamar, Maria Del Carmen; Falagán, Natalia; Aktas, Emel; Terry, Leon A

    2018-01-01

    Food losses and waste have always been a significant global problem for mankind, and one which has become increasingly recognised as such by policy makers, food producers, processors, retailers, and consumers. It is, however, an emotive subject whereby the extent, accuracy and resolution of available data on postharvest loss and waste are questionable, such that key performance indicators on waste can be misinformed. The nature and extent of food waste differ among developed economies, economies in transition and developing countries. While most emphasis has been put on increasing future crop production, far less resource has been and is still channelled towards enabling both established and innovative food preservation technologies to reduce food waste while maintaining safety and quality. Reducing food loss and waste is a more tractable problem than increasing production in the short to medium term, as its solution is not directly limited, for instance, by available land and water resources. Here we argue the need for a paradigm shift of current funding strategies and research programmes that will encourage the development, implementation and translation of collective biological, engineering and management solutions to better preserve and utilise food. Such multidisciplinary thinking across global supply chains is an essential element in the pursuit of achieving sustainable food and nutritional security. The implementation of allied technological and management solutions is reliant on there being sufficient skilled human capital and resources. There is currently a lack of robust postharvest research networks outside of the developed world, and insufficient global funding mechanisms that can support such interdisciplinary collaborations. There is, thus, a collective need for schemes that encourage inter-supply chain research, knowledge exchange and capacity building to reduce food losses and waste. © 2017 Society of Chemical Industry. © 2017 Society of Chemical

  3. Nuclear medicine. Medical technology research

    International Nuclear Information System (INIS)

    Lerch, H.; Jigalin, A.

    2005-01-01

    Aim, method: the scientific publications in the 2003 and 2004 issues of the journal Nuklearmedizin were analyzed retrospectively with regard to the proportion of medical technology research. Results: out of a total of 73 articles examined, 9 (12%) were classified as medical technology research, that is, 8/15 of the original papers (16%) and one of the case reports (5%). Of these 9 articles, 44% (4/9) focused on the combination of molecular and morphological imaging with direct technical appliance or information technology solutions. Conclusion: medical technology research is limited in the journal's catchment area. The reason for this is related to the interdependency between divergent development dynamics in the medical technology industry's locations, the many years that the area of scintigraphic technology has been underrepresented, research policy particularly in discrepancies in the promotion of molecular imaging and a policy in which health is not perceived as a predominantly good and positive economic factor, but more as a curb to economic development. (orig.)

  4. Análise: indicadores de pesquisa do XX Congresso Brasileiro de Ciência e Tecnologia de Alimentos Analysis: research indicators of the XX Brazilian Congress of Food Science and Technology

    Directory of Open Access Journals (Sweden)

    Renato João Sossela de Freitas

    2007-08-01

    Brazilian Food and Agro Industries in the World Context. The objective of this Congress was discuss the scientific and technological development and the innovation in the food industry in the world scenery. The scientific program was including and diversified: Conferences, Lectures, Table-round, Courses, Technological Clinics, Technical Workshops and Scientific Works Presentations in eight areas defined by the Congress. As a result of XX CBCTA'S accomplishment, this analysis seeks a presentation and discussion of the research indicators of the Food Science and Technology area, as well as subsidies for fomentation departments for decision of investments in the research and in the formation of human resources. In the XX CBCTA, 2066 scientific works of the whole Brazil were presented, except for the State of Rondônia. The works were registered in the database and used for this analysis. The registrations were chosen in agreement with the area of the research of each work, under each author's responsibility. The areas defined by the Scientific Commission of the Congress were: Packing (EB; Analytic Method (MA; Microbiology, Mycotoxicology and Biotechnology (MB; Nutrition, Health and Food (NA; Product Process and Development (PD; Food Quality (QA; Chemistry and Biochemistry (QB; and Agro industrial Residue and Environment (RM.

  5. Research award: Agriculture and Food Security | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Research shows that appropriate food security interventions can improve ... sector within the context of increased productivity and reduction of post-harvest loss, rural ... The successful candidate will allocate 50% of his/her time for a research ... with a focus on agriculture;; Business administration and/or management, with a ...

  6. Food formulation and not processing level: Conceptual divergences between public health and food science and technology sectors.

    Science.gov (United States)

    Botelho, R; Araújo, W; Pineli, L

    2018-03-04

    Observed changes in eating and drinking behaviors in economically developing countries are associated with increase of obesity and related chronic diseases. Researchers from field of public health (PH) have attributed this problem to food processing and have created new food classification systems to support their thesis. These classifications conceptually differ from processing level concepts in food science, and state to people that food processing is directly related to nutritional impact of food. Our work aims to compare the concept of food processing from the standpoint of food science and technology (FST) and public health and to discuss differences related to formulation or level of processing of products and their impact on nutritional quality. There is a misconception between food processing/unit operation/food technology and formulation or recipes. For the public health approach, classification is based on food products selection and the use of ingredients that results in higher consumption of sugar, sodium, fat, and additives, whereas in FST, processing level is based on the intensity and amount of unit operations to enhance shelf life, food safety, food quality, and availability of edible parts of raw materials. Nutritional quality of a product or preparation is associated with formulation/recipe and not with the level of processing, with few exceptions. The impact of these recommendations on the actual comprehension of food processing and quality must be considered by the population.

  7. Engineering research, development and technology

    International Nuclear Information System (INIS)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report

  8. Development of sterilized porridge for patients by combined treatment of food technology with radiation technology

    International Nuclear Information System (INIS)

    Kim, Jaehun; Choi, Jongil; Song, Beomseok

    2010-09-01

    This research was conducted to develop patient foods of high quality using a radiation fusion technology with food processing. Radiation technique to increase calorie of porridge was established, and it was investigated that radiation effects on functional materials, which can could be added to increase functionality of patient foods. Moreover, sterilized semi-fluid meal (milk porridge) for patients with higher calorie was developed by a sterilization process by gamma irradiation, combined treatments to improve the sensory qualities, and fortification with various nutrients. Also, sensory survey on irradiated commercial patient foods was performed to find the problems and improvement points of the developed products. Optimal packaging material was selected by evaluation of effect of irradiation in packaging materials and a convenient package for consuming by patients was decided. Safety of the irradiated milk porridge was confirmed by in-vivo genotoxicological test, and its nutritional composition for patients was evaluated by nutritional analysis. Finally, the milk porridge was developed as liquid, dried, powdered, and pellet type products. This research may contribute to improve life quality of patients by supplement of various foods with high quality to immuno-compromised patients. Furthermore, economic profits and technological advances are expected by commercialization of the patient foods

  9. Development of sterilized porridge for patients by combined treatment of food technology with radiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jaehun; Choi, Jongil; Song, Beomseok; and others

    2010-09-15

    This research was conducted to develop patient foods of high quality using a radiation fusion technology with food processing. Radiation technique to increase calorie of porridge was established, and it was investigated that radiation effects on functional materials, which can could be added to increase functionality of patient foods. Moreover, sterilized semi-fluid meal (milk porridge) for patients with higher calorie was developed by a sterilization process by gamma irradiation, combined treatments to improve the sensory qualities, and fortification with various nutrients. Also, sensory survey on irradiated commercial patient foods was performed to find the problems and improvement points of the developed products. Optimal packaging material was selected by evaluation of effect of irradiation in packaging materials and a convenient package for consuming by patients was decided. Safety of the irradiated milk porridge was confirmed by in-vivo genotoxicological test, and its nutritional composition for patients was evaluated by nutritional analysis. Finally, the milk porridge was developed as liquid, dried, powdered, and pellet type products. This research may contribute to improve life quality of patients by supplement of various foods with high quality to immuno-compromised patients. Furthermore, economic profits and technological advances are expected by commercialization of the patient foods.

  10. Raman chemical imaging technology for food and agricultural applications

    Science.gov (United States)

    This paper presents Raman chemical imaging technology for inspecting food and agricultural products. The paper puts emphasis on introducing and demonstrating Raman imaging techniques for practical uses in food analysis. The main topics include Raman scattering principles, Raman spectroscopy measurem...

  11. Spectroscopic imaging technologies for online food safety and sanitation inspection

    Science.gov (United States)

    The Environmental Microbial and Food Safety Laboratory, ARS, USDA is one of the leading groups for the development of optoelectronic sensing technologies and methodologies for food quality, safety, and sanitation inspection. High throughput hyperspectral and multispectral imaging techniques use Ram...

  12. Alternative food safety intervention technologies: flash pasteurization of finfish

    Science.gov (United States)

    Alternative nonthermal and thermal food safety interventions are gaining acceptance by the food processing industry and consumers. These technologies include high pressure processing, ultraviolet and pulsed light, ionizing radiation, pulsed and radiofrequency electric fields, cold atmospheric plasm...

  13. Research at the Dairy and Functional Foods Research Unit

    Science.gov (United States)

    Dr. Peggy Tomasula is Research Leader of the Dairy and Functional Foods Research Unit (DFFRU), ARS, USDA, Wyndmoor, PA, a group that includes 11 Research Scientists, 4 of whom are Lead Scientists (LS), 13 support scientists, and 3 Retired Collaborators. The mission of the DFFRU is to solve critical ...

  14. Technology Interventions to Manage Food Intake: Where Are We Now?

    Science.gov (United States)

    Allman-Farinelli, Margaret; Gemming, Luke

    2017-09-23

    This review describes the state-of-the-art for dietary assessment using smartphone apps and digital technology and provides an update on the efficacy of technology-mediated interventions for dietary change. Technology has progressed from apps requiring entry of foods consumed, to digital imaging to provide food intake data. However, these methods rely on patients being active in data collection. The automated estimation of the volume and composition of every meal consumed globally is years away. The use of text messaging, apps, social media, and combinations of these for interventions is growing and proving effective for type 2 diabetes mellitus (T2DM). Effectiveness of text messaging for obesity management is improving and multicomponent interventions show promise. A stand-alone app is less likely to produce positive outcomes and social media is relatively unexplored. A concentrated effort will be needed to progress digital dietary assessment. Researcher-designed technology programs are producing positive outcomes for T2DM but further research is needed in the area of weight management.

  15. USDA food and nutrient databases provide the infrastructure for food and nutrition research, policy, and practice.

    Science.gov (United States)

    Ahuja, Jaspreet K C; Moshfegh, Alanna J; Holden, Joanne M; Harris, Ellen

    2013-02-01

    The USDA food and nutrient databases provide the basic infrastructure for food and nutrition research, nutrition monitoring, policy, and dietary practice. They have had a long history that goes back to 1892 and are unique, as they are the only databases available in the public domain that perform these functions. There are 4 major food and nutrient databases released by the Beltsville Human Nutrition Research Center (BHNRC), part of the USDA's Agricultural Research Service. These include the USDA National Nutrient Database for Standard Reference, the Dietary Supplement Ingredient Database, the Food and Nutrient Database for Dietary Studies, and the USDA Food Patterns Equivalents Database. The users of the databases are diverse and include federal agencies, the food industry, health professionals, restaurants, software application developers, academia and research organizations, international organizations, and foreign governments, among others. Many of these users have partnered with BHNRC to leverage funds and/or scientific expertise to work toward common goals. The use of the databases has increased tremendously in the past few years, especially the breadth of uses. These new uses of the data are bound to increase with the increased availability of technology and public health emphasis on diet-related measures such as sodium and energy reduction. Hence, continued improvement of the databases is important, so that they can better address these challenges and provide reliable and accurate data.

  16. Nutrition and food technology for a Controlled Ecological Life Support System (CELSS)

    Science.gov (United States)

    Glaser, P. E.; Mabel, J. A.

    1981-01-01

    Food technology requirements and a nutritional strategy for a Controlled Ecological Life Support System (CELSS) to provide adequate food in an acceptable form in future space missions are discussed. The establishment of nutritional requirements, dietary goals, and a food service system to deliver acceptable foods in a safe and healthy form and the development of research goals and priorities were the main objectives of the study.

  17. Smartphone-Based Food Diagnostic Technologies: A Review.

    Science.gov (United States)

    Rateni, Giovanni; Dario, Paolo; Cavallo, Filippo

    2017-06-20

    A new generation of mobile sensing approaches offers significant advantages over traditional platforms in terms of test speed, control, low cost, ease-of-operation, and data management, and requires minimal equipment and user involvement. The marriage of novel sensing technologies with cellphones enables the development of powerful lab-on-smartphone platforms for many important applications including medical diagnosis, environmental monitoring, and food safety analysis. This paper reviews the recent advancements and developments in the field of smartphone-based food diagnostic technologies, with an emphasis on custom modules to enhance smartphone sensing capabilities. These devices typically comprise multiple components such as detectors, sample processors, disposable chips, batteries and software, which are integrated with a commercial smartphone. One of the most important aspects of developing these systems is the integration of these components onto a compact and lightweight platform that requires minimal power. To date, researchers have demonstrated several promising approaches employing various sensing techniques and device configurations. We aim to provide a systematic classification according to the detection strategy, providing a critical discussion of strengths and weaknesses. We have also extended the analysis to the food scanning devices that are increasingly populating the Internet of Things (IoT) market, demonstrating how this field is indeed promising, as the research outputs are quickly capitalized on new start-up companies.

  18. Smartphone-Based Food Diagnostic Technologies: A Review

    Directory of Open Access Journals (Sweden)

    Giovanni Rateni

    2017-06-01

    Full Text Available A new generation of mobile sensing approaches offers significant advantages over traditional platforms in terms of test speed, control, low cost, ease-of-operation, and data management, and requires minimal equipment and user involvement. The marriage of novel sensing technologies with cellphones enables the development of powerful lab-on-smartphone platforms for many important applications including medical diagnosis, environmental monitoring, and food safety analysis. This paper reviews the recent advancements and developments in the field of smartphone-based food diagnostic technologies, with an emphasis on custom modules to enhance smartphone sensing capabilities. These devices typically comprise multiple components such as detectors, sample processors, disposable chips, batteries and software, which are integrated with a commercial smartphone. One of the most important aspects of developing these systems is the integration of these components onto a compact and lightweight platform that requires minimal power. To date, researchers have demonstrated several promising approaches employing various sensing techniques and device configurations. We aim to provide a systematic classification according to the detection strategy, providing a critical discussion of strengths and weaknesses. We have also extended the analysis to the food scanning devices that are increasingly populating the Internet of Things (IoT market, demonstrating how this field is indeed promising, as the research outputs are quickly capitalized on new start-up companies.

  19. Smartphone-Based Food Diagnostic Technologies: A Review

    Science.gov (United States)

    Rateni, Giovanni; Dario, Paolo; Cavallo, Filippo

    2017-01-01

    A new generation of mobile sensing approaches offers significant advantages over traditional platforms in terms of test speed, control, low cost, ease-of-operation, and data management, and requires minimal equipment and user involvement. The marriage of novel sensing technologies with cellphones enables the development of powerful lab-on-smartphone platforms for many important applications including medical diagnosis, environmental monitoring, and food safety analysis. This paper reviews the recent advancements and developments in the field of smartphone-based food diagnostic technologies, with an emphasis on custom modules to enhance smartphone sensing capabilities. These devices typically comprise multiple components such as detectors, sample processors, disposable chips, batteries and software, which are integrated with a commercial smartphone. One of the most important aspects of developing these systems is the integration of these components onto a compact and lightweight platform that requires minimal power. To date, researchers have demonstrated several promising approaches employing various sensing techniques and device configurations. We aim to provide a systematic classification according to the detection strategy, providing a critical discussion of strengths and weaknesses. We have also extended the analysis to the food scanning devices that are increasingly populating the Internet of Things (IoT) market, demonstrating how this field is indeed promising, as the research outputs are quickly capitalized on new start-up companies. PMID:28632188

  20. Research Award: Food, Environment, and Health | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-09-07

    Sep 7, 2016 ... ... skills and gain a fresh perspective on crucial development issues. ... that impact food systems and promote healthy and sustainable diets. ... communication material; participating in project development, ... Copyright · Open access policy · Privacy policy · Research ethics · Transparency · Website usage.

  1. Dairy and functional foods research in the Agricultural Research Service

    Science.gov (United States)

    The Dairy and Functional Foods Research Unit is the only group in the Agricultural Research Service that is dedicated to solving critical problems in milk utilization and fruit and vegetable byproducts from specialty crops. The many areas of investigation include development of specialty cheese, c...

  2. Smart storage technologies applied to fresh foods: A review.

    Science.gov (United States)

    Wang, Jingyu; Zhang, Min; Gao, Zhongxue; Adhikari, Benu

    2017-06-30

    Fresh foods are perishable, seasonal and regional in nature and their storage, transportation, and preservation of freshness are quite challenging. Smart storage technologies can online detection and monitor the changes of quality parameters and storage environment of fresh foods during storage, so that operators can make timely adjustments to reduce the loss. This article reviews the smart storage technologies from two aspects: online detection technologies and smartly monitoring technologies for fresh foods. Online detection technologies include electronic nose, nuclear magnetic resonance (NMR), near infrared spectroscopy (NIRS), hyperspectral imaging and computer vision. Smartly monitoring technologies mainly include some intelligent indicators for monitoring the change of storage environment. Smart storage technologies applied to fresh foods need to be highly efficient and nondestructive and need to be competitively priced. In this work, we have critically reviewed the principles, applications, and development trends of smart storage technologies.

  3. Collation of Scientific Evidence on Consumer Acceptance of New Food Technologies

    DEFF Research Database (Denmark)

    Fischer, A. R. H; van Trijp, H. C. M.; Hofenk,, D.

    The current report investigates consumer acceptance of new food technologies by reviewing the scientific literature. The review is organised along three routes to consumer acceptance of new technologies: The consumer benefit road: the central road of technology features influencing experienced...... be made how the different roads contribute to consumer acceptance or rejection of a novel food technology dependent on technology characteristics. A checklist for the introduction of novel food technologies taking account of all the roads and the technology is presented at the end of this report.......; and Novel packaging and storage technologies is reviewed along these roads. The results show that research remains fragmented in approach and usually adopts the point of view of a single road to consumer acceptance of a novel technology. Nevertheless by combining the available evidence recommendation can...

  4. Research for food and health in Europe: themes, needs and proposals

    LENUS (Irish Health Repository)

    McCarthy, Mark

    2011-09-29

    Abstract Background Diet, in addition to tobacco, alcohol and physical exercise, is a major factor contributing to chronic diseases in Europe. There is a pressing need for multidisciplinary research to promote healthier food choices and better diets. Food and Health Research in Europe (FAHRE) is a collaborative project commissioned by the European Union. Among its tasks is the description of national research systems for food and health and, in work reported here, the identification of strengths and gaps in the European research base. Methods A typology of nine research themes was developed, spanning food, society, health and research structures. Experts were selected through the FAHRE partners, with balance for individual characteristics, and reported using a standardised template. Results Countries usually commission research on food, and on health, separately: few countries have combined research strategies or programmes. Food and health are also strongly independent fields within the European Commission\\'s research programmes. Research programmes have supported food and bio-technology, food safety, epidemiological research, and nutritional surveillance; but there has been less research into personal behaviour and very little on environmental influences on food choices - in the retail and marketing industries, policy, and regulation. The research is mainly sited within universities and research institutes: there is relatively little published research contribution from industry. Discussion National food policies, based on epidemiological evidence and endorsed by the World Health Organisation, recommend major changes in food intake to meet the challenge of chronic diseases. Biomedical and biotechnology research, in areas such as \\'nutrio-genomics\\

  5. Integrating ergonomic aspects into research and development projects as a preventive strategy in the food industries

    DEFF Research Database (Denmark)

    Hansen, Iben Posniak; Broberg, Ole

    1997-01-01

    As part of a national research and development programme for food technology it was formulated as a demand to applicants to describe the potential ergonomics impact of the research and development (R&D) projects. As the primary purpose of the research programme was to strengthen the Danish food...

  6. European research and the Hungarian school of food irradiation

    Science.gov (United States)

    Lakner, Zoltán; Soós, Sándor; Vida, Zsófia; Farkas, Csilla

    2016-12-01

    In second half of the 20th century the research of application of irradiation to food preservation become a new and prospective field of food science and technology. This activity has been supported and developed in a parallel way in both halves of the that-time world, divided by the iron-curtain. Under these conditions, fulfilling a specific "bridge-role", some highly innovative scientists, first of all Professor József Farkas has been able to achieve considerable results in this new field of science. Based on citation analysis and science mapping it can be proven, that his path-breaking research has been exercise a fertilising effect on development of a wide range of fields of science, and considerably contributed to proliferation of this science and technology in numerous countries of the world.

  7. Satellite Technology Contribution to Water and Food Security

    Science.gov (United States)

    Brown, Molly E.

    2010-01-01

    This slide presentation reviews the issue of supplies of food, the relationship to food security, the ability of all people to attain sufficient food for an active and healthy life, and the ability to use satellite technology and remote sensing to assist with planning and act as an early warning system.

  8. Food Processing: Technology and Nutritive Value.

    Science.gov (United States)

    Gerbouin-Rerolle, Pascale

    1993-01-01

    This booklet examines the principles of food preservation, food preservation techniques, and nutrition-related consequences of food processing. All foodstuffs in their natural state will deteriorate and become unfit for human consumption due to internal factors, such as enzyme activity, or external factors, such as insects, rodents, and…

  9. Biofuels. Environment, technology and food security

    International Nuclear Information System (INIS)

    Escobar, Jose C.; Lora, Electo S.; Venturini, Osvaldo J.; Yanez, Edgar E.; Castillo, Edgar F.; Almazan, Oscar

    2009-01-01

    The imminent decline of the world's oil production, its high market prices and environmental impacts have made the production of biofuels to reach unprecedent volumes over the last 10 years. This is why there have been intense debates among international organizations and political leaders in order to discuss the impacts of the biofuel use intensification. Besides assessing the causes of the rise in the demand and production of biofuels, this paper also shows the state of the art of their world's current production. It is also discussed different vegetable raw materials sources and technological paths to produce biofuels, as well as issues regarding production cost and the relation of their economic feasibility with oil international prices. The environmental impacts of programs that encourage biofuel production, farmland land requirements and the impacts on food production are also discussed, considering the life cycle analysis (LCA) as a tool. It is concluded that the rise in the use of biofuels is inevitable and that international cooperation, regulations and certification mechanisms must be established regarding the use of land, the mitigation of environmental and social impacts caused by biofuel production. It is also mandatory to establish appropriate working conditions and decent remuneration for workers of the biofuels production chain. (author)

  10. The Application of Augmented Reality Technology in Food Professional Education

    OpenAIRE

    Wei Shan

    2015-01-01

    This study presents the application of augmented reality technology in food professional education, combining with the current situation of applying virtual reality education, analyzes the problems existing in the virtual reality application in food professional education, puts forward some suggestions and finally prospects the developing trend of the technology of virtual reality now.

  11. Workshop report: The application of technology for food preservation

    International Nuclear Information System (INIS)

    Razley Mohd Nordin

    1985-01-01

    A workshop on the application of ionizing technology for food preservation is reviewed. The major aim of this workshop is to introduce this new technology to the layman and local scientists so as to promote the new treatment in the local food industry

  12. Research issues: the food environment and obesity.

    Science.gov (United States)

    Mattes, Richard; Foster, Gary D

    2014-12-01

    "Research Issues: The Food Environment and Obesity" is an article series commissioned by the American Society for Nutrition and The Obesity Society in an attempt to consider the state of understanding on this topic and identify key knowledge gaps. Roberts and Karl focus on the role of energy density in the regulation of energy intake and body weight and offer recommendations for prioritizing research. Finkelstein et al examine food and beverage purchases as a function of price changes and conclude that targeted food taxes and subsidies alone are unlikely to substantially affect obesity. Pereira points out the difficulty in establishing the strength of the association between intake of sugar-sweetened beverages and weight gain and obesity. Johnson and Wardle review the effects of palatability and variety on eating behavior and weight. Livingstone and Pourshahidi examine the impact of portion size manipulations on energy intake and weight management and find that consumers generally tend to eat proportionally more as portion size increases. Kant focuses on the efficacy and effectiveness of eating frequency manipulation for body weight management and finds that such manipulation has consistently yielded null results. Finally, Gordon-Larsen identifies several limitations of the existing literature regarding neighborhood access to healthy foods. © 2014 American Society for Nutrition.

  13. Youth Participatory Action Research (YPAR) 2.0: How Technological Innovation and Digital Organizing Sparked a Food Revolution in East Oakland

    Science.gov (United States)

    Akom, Antwi; Shah, Aekta; Nakai, Aaron; Cruz, Tessa

    2016-01-01

    This article argues that technological innovation is transforming the flow of information, the fluidity of social action, and is giving birth to new forms of bottom up innovation that are capable of expanding and exploding old theories of reproduction and resistance because "smart mobs," "street knowledge," and "social…

  14. Recent developments in smart freezing technology applied to fresh foods.

    Science.gov (United States)

    Xu, Ji-Cheng; Zhang, Min; Mujumdar, Arun S; Adhikari, Benu

    2017-09-02

    Due to the increased awareness of consumers in sensorial and nutritional quality of frozen foods, the freezing technology has to seek new and innovative technologies for better retaining the fresh like quality of foods. In this article, we review the recent developments in smart freezing technology applied to fresh foods. The application of these intelligent technologies and the associated underpinning concepts have greatly improved the quality of frozen foods and the freezing efficiency. These technologies are able to automatically collect the information in-line during freezing and help control the freezing process better. Smart freezing technology includes new and intelligent technologies and concepts applied to the pretreatment of the frozen product, freezing processes, cold chain logistics as well as warehouse management. These technologies enable real-time monitoring of quality during the freezing process and help improve product quality and freezing efficiency. We also provide a brief overview of several sensing technologies used to achieve automatic control of individual steps of freezing process. These sensing technologies include computer vision, electronic nose, electronic tongue, digital simulation, confocal laser, near infrared spectroscopy, nuclear magnetic resonance technology and ultrasound. Understanding of the mechanism of these new technologies will be helpful for applying them to improve the quality of frozen foods.

  15. Immobilization Technologies in Probiotic Food Production

    Directory of Open Access Journals (Sweden)

    Gregoria Mitropoulou

    2013-01-01

    Full Text Available Various supports and immobilization/encapsulation techniques have been proposed and tested for application in functional food production. In the present review, the use of probiotic microorganisms for the production of novel foods is discussed, while the benefits and criteria of using probiotic cultures are analyzed. Subsequently, immobilization/encapsulation applications in the food industry aiming at the prolongation of cell viability are described together with an evaluation of their potential future impact, which is also highlighted and assessed.

  16. Research Update - Intervention Technologies for Enhancing the Safety and Security of Fresh and Minimally Processed Produce and Solid Plant-Derived Foods

    Science.gov (United States)

    The produce safety research objectives of Research Project 1935-41420-011 are to 1) understand pathogen microbial ecology and its effects on decontamination efficacy; 2) develop biological-based intervention strategies for pathogen reduction; and 3) develop new effective chemical and physical decont...

  17. Food preservation technologies developed at BARC

    International Nuclear Information System (INIS)

    Jain, M.P.

    2013-01-01

    Food irradiation is important as it is being used to disinfest food grains, pulses, wheat flour, rice, semolina, raisins etc; quarantining and shelf life increasing of fruits like mangoes; microbial decontamination of spices; sprout inhibition of tubers and bulbs; shelf life increasing and pathogen control of meat and fish. Category-IV type irradiators based on gamma rays exposure of food are currently being employed for this purpose. Cobalt-60 isotope is produced in the nuclear reactors. Isotope gives gamma rays as its nucleus is unstable. The gamma rays pass through the food items and inhibit sprouting of tubers and bulbs, kill bacteria, virus and the larvae of insects

  18. Linking research and food security policies in MENA | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    21 حزيران (يونيو) 2013 ... Hammou Laamrani works for IDRC as a specialist in agriculture, water, and knowledge management. He believes that ... Food security challenges are also related to the low adoption of technologies to optimize food availability and storage, reduce post-harvest losses, and improve food safety. Unless food ...

  19. Research on food irradiation in Indonesia

    International Nuclear Information System (INIS)

    Hilmy, N.; Maha, M.; Chosdu, R.

    1986-01-01

    Studies on various aspects of food irradiation have been done in Indonesia since 1968, mainly at the Centre for the Application of Isotopes and Radiation, National Atomic Energy Agency of Indonesia. Three irradiation facilities available at the Centre are gamma cell-220, panoramic batch irradiator, and latex irradiator with the present source capacities of about 1.1, 40, and 163.8 kCi Co-60, respectively. In this paper, the present status of research and development on irradiation is presented, covering (1) spices and medicinal plants, (2) rice, wheat flour and coffee bean, (3) fish and fishery products, (4) animal feed, and (5) ongoing projects including fresh fruits, cacao beans, and cashew nut. The Sub-Committee for the Control of Irradiation of Food and Medical Products, set up in August 1984, has prepared the draft of recommendations regarding the regulation for application of food irradiation in Indonedia and the draft of Regulation for the Control of and Trade in Irradiated Food and Traditional Drug to be issued by the government. (Namekawa, K.)

  20. Integrated Food studies education and research:

    DEFF Research Database (Denmark)

    Hansen, Mette Weinreich; Hansen, Stine Rosenlund

    2018-01-01

    The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking into rese......The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking...... into research and education. It also addresses the challenges in integration when the methodological approaches and theoretical frameworks chosen are ontologically and epistemologically different. A discussion of the limitations of integration is thus also part of the paper. The conceptual framework...... of ontonorms (Mol, 2013) is suggested as a common point of departure for a further development of integration. This is suggested relevant due to the fact that it forces different traditions to reflect their own value-related basis and discuss implications of this approach in a broader sense. The common values...

  1. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  2. RFID technologies for imported foods inspection

    Science.gov (United States)

    Food-borne illness typically occurs due to contamination of food products with Escherichia coli, Salmonella spp., Listeria monocytogenes and other pathogens. Unfortunately, it takes several weeks to identify the source of such contamination, possibly due to lack of a central database system that is ...

  3. Space Transportation Technology Workshop: Propulsion Research and Technology

    Science.gov (United States)

    2000-01-01

    This viewgraph presentation gives an overview of the Space Transportation Technology Workshop topics, including Propulsion Research and Technology (PR&T) project level organization, FY 2001 - 2006 project roadmap, points of contact, foundation technologies, auxiliary propulsion technology, PR&T Low Cost Turbo Rocket, and PR&T advanced reusable technologies RBCC test bed.

  4. Understanding consumer attitudes toward food technologies in Canada.

    Science.gov (United States)

    Henson, Spencer; Annou, Mamane; Cranfield, John; Ryks, Joanne

    2008-12-01

    This article reports a study on consumer attitudes to 21 food and nonfood technologies in Canada. The study involves repertory grid interviews with 36 food consumers, the data from which are analyzed using generalized Procrustes analysis. Results highlight the role of perceived risk and perceived benefit in determining the acceptability of the technologies, with individual technologies lying along a continuum between the two. For technology as a whole and the 21 specific technologies, the perceived risk and perceived benefit constructs were the dominant determinants of consumer acceptability. While perceptions of perceived risk and perceived benefit differed between individual respondents, there were very limited consistent relations with a range of sociodemographic variables.

  5. Abstracts of the 15. Brazilian congress on food science and technology; Resumos do 15. congresso brasileiro de ciencia e tecnologia de alimentos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This meeting was about food science, technology and energy production. In this meeting were discussed subjects concerned food preservation and irradiation sources in economical, technological, social and research aspects.

  6. 1991 annual report of the Karlsruhe Federal Food Research Institute

    International Nuclear Information System (INIS)

    1992-01-01

    The Federal Food Research Institute does research in the field of nutrition, food and household sciences as well as in related special fields. Among its working priorities are the determination of foreign matter and radionuclides in food as well as food preservation by means of irradiation including dosimetry. The results of those priorities are represented. (orig./MG) [de

  7. Food irradiation: Technology transfer in Asia, practical experiences

    Science.gov (United States)

    Kunstadt, Peter; Eng, P.

    1993-10-01

    Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the succesful conclusion of the world's first complete food irradiation technology transfer project.

  8. Food irradiation: technology transfer in Asia, practical experiences

    International Nuclear Information System (INIS)

    Kunstadt, P.

    1993-01-01

    Nordion International Inc., in cooperation with the Thai Office of Atomic Energy for Peace (OAEP) and the Canadian International Development Agency (CIDA) recently completed a unique food irradiation technology transfer project in Thailand. This complete food irradiation technology transfer project included the design and construction of an automatic multipurpose irradiation facility as well as the services of construction and installation management and experts in facility operation, maintenance and training. This paper provides an insight into the many events that led to the successful conclusion of the world's first complete food irradiation technology transfer project. (Author)

  9. Effect of Hurdle Technology in Food Preservation: A Review.

    Science.gov (United States)

    Singh, Shiv; Shalini, Rachana

    2016-01-01

    Hurdle technology is used in industrialized as well as in developing countries for the gentle but effective preservation of foods. Hurdle technology was developed several years ago as a new concept for the production of safe, stable, nutritious, tasty, and economical foods. Previously hurdle technology, i.e., a combination of preservation methods, was used empirically without much knowledge of the governing principles. The intelligent application of hurdle technology has become more prevalent now, because the principles of major preservative factors for foods (e.g., temperature, pH, aw, Eh, competitive flora), and their interactions, became better known. Recently, the influence of food preservation methods on the physiology and behavior of microorganisms in foods, i.e. their homeostasis, metabolic exhaustion, stress reactions, are taken into account, and the novel concept of multi-target food preservation emerged. The present contribution reviews the concept of the potential hurdles for foods, the hurdle effect, and the hurdle technology for the prospects of the future goal of a multi-target preservation of foods.

  10. Determinants for conducting food safety culture research

    NARCIS (Netherlands)

    Nyarugwe, Shingai P.; Linnemann, Anita; Hofstede, Gert Jan; Fogliano, Vincenzo; Luning, Pieternel A.

    2016-01-01

    Background Foodborne outbreaks continue to occur regardless of existing food safety measures indicating the shortcomings of these measures to assure food safety. This has led to the recognition of food safety culture as a key contributory factor to the food safety performance of food

  11. Food fermentations: Microorganisms with technological beneficial use

    DEFF Research Database (Denmark)

    Bourdichon, François; Casaregola, Serge; Farrokh, Choreh

    2012-01-01

    Microbial food cultures have directly or indirectly come under various regulatory frameworks in the course of the last decades. Several of those regulatory frameworks put emphasis on “the history of use”, “traditional food”, or “general recognition of safety”. Authoritative lists of microorganism......, legumes, cereals, beverages, and vinegar). We have also reviewed and updated the taxonomy of the microorganisms used in food fermentations in order to bring the taxonomy in agreement with the current standing in nomenclature....... cultures in practical use. However, as the focus mainly was on commercially available dairy cultures, there was an unmet need for a list with a wider scope. We present an updated inventory of microorganisms used in food fermentations covering a wide range of food matrices (dairy, meat, fish, vegetables...

  12. Investigations of food irradiation technology in Japan

    International Nuclear Information System (INIS)

    2009-01-01

    All Nippon Spice Assoc. (ANSA) requested the approval in the Ministry of Health Labour and Welfare (MHLW) of radiation irradiation of their products for sterilization and pesticide in 2000. Problems of food irradiation (FI) which started from this ANSA request have been investigated by concerned Japanese administrations and associations with reference to trends in foreign countries, and of which outline till Aug., 2009 is described in this paper. On ANSA petition, AEC (Atomic Energy Committee) required the investigation of the safety problem in FI as it matched AEC policy and there have been background problems of Japanese people who have been having refusal response to radiation themselves. In 2003, Food Safety Committee (FSC) started, and AEC radiation expert committee investigated the trend and detection methodology of irradiated foods. Next year, FSC approved the irradiation of potato to prevent budding; MHLW began to study the detection methodology; and AEC mentioned to consider the FI problem in the Cabinet meeting and set up its expert committee (2005). MHLW reported the above decision in Councils of food/drug and of food hygiene (2006), published the methodology (thermoluminescence method) and started to monitor spices; and FSC discussed about FI problems with World Health Organization (WHO) experts (2007). During these years, the administrations trusted various investigations like foreign trends, safety and assessment of FI. In 2009, MHLW published results of their trusted investigations, based on which food hygienic and standardization sections began to investigate the problems; and FSC, the toxicity study of alkylcyclobutanone. During the period later than 2007, not only spices but also other foods like dried vegetables, tea, certain farm and marine products have been subject to monitoring (MHLW). Thus, MHLW has taken a leading role in actual approval of irradiated potato and in monitoring of imported foods. (K.T.)

  13. National Center for Food Safety and Technology

    Science.gov (United States)

    2013-12-05

    on the Determination of Copper, Iron, Manganese and Zinc in Beef and Goat Liver American Chemical Society (ACS) – September, 2013 22. Meng Xu...addresses key food safety issues facing the country and supports the development of safe food with health-promoting properties from farm to fork. This...Reddy, Renate Reimschuessel. 2013. Proficiency Test on the Determination of Copper, Iron, Manganese and Zinc in Beef and Goat Liver American

  14. Identifying key performance indicators in food technology contract R&D

    NARCIS (Netherlands)

    Flipse, S.M.; Sanden, van der M.C.A.; Velden, van der T.; Fortuin, F.T.J.M.; Omta, S.W.F.; Osseweijer, P.

    2013-01-01

    Innovating companies increasingly rely on outsourcing to Contract Research Organisations (CROs) for their Research and Development (R&D), which are largely understudied. This paper presents the outcome of a case study in the field of food technology contract research, identifying context

  15. Research Award: Agriculture and Food Security Program

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    diversify small‐scale agriculture, improve nutritional quality, and income by ... strategies for youth engagement in agri-food value chains for improved food ... successful examples of youth in agri-food businesses and for connecting youth.

  16. Technological innovation and valorisation of traditional food: a sustainable combination?

    Directory of Open Access Journals (Sweden)

    Marco Dalla Rosa

    2009-10-01

    Full Text Available Valorization of traditional foods is nowadays a key element for market developments where national industries are strongly involved in saving product peculiarity against imitative food coming from foreign countries or even different continents. Other than the lack in well defined and garanteed sensorial quality, the production conditions, the quality of raw material and the different cultural background lead to produce foods that, despite to the name indicating some italian origin or recallin in some ways Italy and italian food and traditions, are only imitation without safety and quality proper of the original traditional food. Thus it is necessary to individuate appropriated technologies and strategies to increase le level of garantee offered to the consumer in order to promote the consumption of traditional foods with the promised quality and safety. In this paper the role that the modern food technology and the food science can assume to improve the processing conditions and yields, introducing some innovations into the old processes will be pointed out. Furthermore, the characterization of the complexity of the chemical, chemico-physical and rheological properties that influence the whole sensorial aspect of traditional foods, both from animal and vegetal (and fruit origin, is a growing challenge of the food science since the new analytical methodologies now available. In the paper some example of objective characterization and introduction of innovation steps are reported as well as genuinity marker individuation in order to give sustainability to the production of traditional foods in particular in SME.

  17. Thermal food processing: new technologies and quality issues

    National Research Council Canada - National Science Library

    Sun, Da-Wen

    2012-01-01

    .... The editor of Thermal Food Processing: New Technologies and Quality Issues presents a comprehensive reference through authors that assist in meeting this challenge by explaining the latest developments and analyzing the latest trends...

  18. DNA microarray technology in nutraceutical and food safety.

    Science.gov (United States)

    Liu-Stratton, Yiwen; Roy, Sashwati; Sen, Chandan K

    2004-04-15

    The quality and quantity of diet is a key determinant of health and disease. Molecular diagnostics may play a key role in food safety related to genetically modified foods, food-borne pathogens and novel nutraceuticals. Functional outcomes in biology are determined, for the most part, by net balance between sets of genes related to the specific outcome in question. The DNA microarray technology offers a new dimension of strength in molecular diagnostics by permitting the simultaneous analysis of large sets of genes. Automation of assay and novel bioinformatics tools make DNA microarrays a robust technology for diagnostics. Since its development a few years ago, this technology has been used for the applications of toxicogenomics, pharmacogenomics, cell biology, and clinical investigations addressing the prevention and intervention of diseases. Optimization of this technology to specifically address food safety is a vast resource that remains to be mined. Efforts to develop diagnostic custom arrays and simplified bioinformatics tools for field use are warranted.

  19. A Complete Set of Technologies for Green Food Pork Production

    Institute of Scientific and Technical Information of China (English)

    YANG Xing-wu; SHAN An-shan; JIANG Jiu-tian; ZHANG Tian-feng

    2003-01-01

    Key technologies for green food pork production were described in this article,as aspects of business standardization;production equipments and facilities,product quality control;and pork production site establishment.

  20. A model for education and promoting food science and technology ...

    African Journals Online (AJOL)

    A model for education and promoting food science and technology among high school students and the public. ... at the tertiary stage (retail) directly with the consumer while depending on the product of FST. ... AJOL African Journals Online.

  1. Institutional Support : Centre for Research and Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

  2. Nano-Science-Engineering-Technology Applications to Food and Nutrition.

    Science.gov (United States)

    Nakajima, Mitsutoshi; Wang, Zheng; Chaudhry, Qasim; Park, Hyun Jin; Juneja, Lekh R

    2015-01-01

    Nanoscale Science, Engineering and Technology are applied to Food and Nutrition. Various delivery systems include nanoemulsions, microemulsions, solid lipid nanoparticles, micelles, and liposomes. The nanoscale systems have advantages, such as higher bioavailabitity, and other physicochemical properties. The symposium will provide an overview of the formulation, characterization, and utilization of nanotechnology-based food and nutrition.

  3. Technological factors affecting biogenic amine content in foods: a review

    Directory of Open Access Journals (Sweden)

    Fausto Gardini

    2016-08-01

    Full Text Available Biogenic amines (BAs are molecules which can be present in foods and, due to their toxicity, can cause adverse effects on the consumers. BAs are generally produced by microbial decarboxylation of amino acids in food products. The most significant BAs occurring in foods are histamine, tyramine, putrescine, cadaverine, tryptamine, 2-phenylethylamine, spermine, spermidine and agmatine. The importance of preventing the excessive accumulation of BAs in food is related to their impact on human health and food quality. Quality criteria in connection with the presence of BAs in food and food products are necessary from a toxicological point of view. This is particularly important in fermented foods in which the massive microbial proliferation required for obtaining specific products is often relater with BA accumulation. In this review, up-to-date information and recent discoveries about technological factors affecting biogenic amine content in foods are reviewed. Specifically, BA forming-microorganism and decarboxylation activity, genetic and metabolic organization of decarboxylases, risk associated to BAs (histamine, tyramine toxicity and other BAs, environmental factors influencing BA formation (temperature, salt concentration, pH. In addition, the technological factors for controlling BA production (use of starter culture, technological additives, effects of packaging, other non-thermal treatments, metabolising BA by microorganisms, effects of pressure treatments on BA formation and antimicrobial substances are addressed.

  4. Technologies of Selective Energy Supply at Evaporation of Food Solutes

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2017-04-01

    Full Text Available The aim of the research is to create innovative evaporating equipment that can produce concentrates with a high content of solids, with a low level of thermal effects on raw materials. The significance of the solution of technological problems of the key process of food technologies - concentration of liquid solutions (juices, extracts, etc. is shown. Problems and scientific contradictions are formulated and the hypothesis on using of electromagnetic energy sources for direct energy transfer to solution’s moisture has been offered. The prospects of such an energy effect are proved by the energy management methods. The schemes of fuel energy conversion for the conventional thermal concentration technology and the innovative plant based on the electromagnetic energy generators are presented. By means of the similarity theory the obtained model is transformed to the criterial one depicted kinetic of evaporation process at the electromagnetic field action. The dimensionless capacity of the plant is expressed by the dependence between the Energetic effect number and relative moisture content. The scheme of automated experimental system for study of the evaporation process in the microwave field is shown. The experimental results of juice evaporation are presented. It has been demonstrated that the technologies of selective energy supply represent an effective tool for improvement of juice concentration evaporative plants. The main result of the research is design of the evaporator that allows reaching juice concentrates with °brix 95 at the temperature as low as 35 °С, i.e. 2…3 times superior than traditional technologies.

  5. Microbiological aspects related to the feasibility of PEF technology for food pasteurization.

    Science.gov (United States)

    Saldaña, G; Álvarez, I; Condón, S; Raso, J

    2014-01-01

    Processing unit operations that seek to inactivate harmful microorganisms are of primary importance in ascertaining the safety of food. The capability of pulsed electric fields (PEF) to inactivate vegetative cells of microorganisms at temperatures below those used in thermal processing makes this technology very attractive as a nonthermal pasteurization process for the food industry. Commercial exploitation of this technology for food pasteurization requires the identification of the most PEF-resistant microorganisms that are of concern to public health. Then, the treatment conditions applicable at industrial scale that would reduce the population of these microorganisms to a level that guarantees food safety must be defined. The objective of this paper is to critically compile recent, relevant knowledge with the purpose of enhancing the feasibility of using PEF technology for food pasteurization and underlining the required research for designing PEF pasteurization processes.

  6. Electrostatic coating technologies for food processing.

    Science.gov (United States)

    Barringer, Sheryl A; Sumonsiri, Nutsuda

    2015-01-01

    The application of electrostatics in both powder and liquid coating can improve the quality of food, such as its appearance, aroma, taste, and shelf life. Coatings can be found most commonly in the snack food industry, as well as in confectionery, bakery, meat and cheese processing. In electrostatic powder coating, the most important factors influencing coating quality are powder particle size, density, flowability, charge, and resistivity, as well as the surface properties and characteristics of the target. The most important factors during electrostatic liquid coating, also known as electrohydrodynamic coating, include applied voltage and electrical resistivity and viscosity of the liquid. A good understanding of these factors is needed for the design of optimal coating systems for food processing.

  7. Printable food: the technology and its application in human health.

    Science.gov (United States)

    Lipton, Jeffrey I

    2017-04-01

    Millions of Americans suffer from diseases and conditions that require careful control of their diet as part of treatment. The current solution is to have each person customize their own food choices. Food production automation can enable consumer specific data to be easily integrated into the food as it is being prepared. This would improve the quality and utility of the food without a cognitive burden on the consumer. 3D Printing is an ideal family of technologies for enabling such mass customization of food. Current efforts in 3D printing food are focused on improving the artistic quality of food in the short term and consumer health in the long term. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Combining Ground-Truthing and Technology to Improve Accuracy in Establishing Children's Food Purchasing Behaviors.

    Science.gov (United States)

    Coakley, Hannah Lee; Steeves, Elizabeth Anderson; Jones-Smith, Jessica C; Hopkins, Laura; Braunstein, Nadine; Mui, Yeeli; Gittelsohn, Joel

    Developing nutrition-focused environmental interventions for youth requires accurate assessment of where they purchase food. We have developed an innovative, technology-based method to improve the accuracy of food source recall among children using a tablet PC and ground-truthing methodologies. As part of the B'more Healthy Communties for Kids study, we mapped and digitally photographed every food source within a half-mile radius of 14 Baltimore City recreation centers. This food source database was then used with children from the surrounding neighborhoods to search for and identify the food sources they frequent. This novel integration of traditional data collection and technology enables researchers to gather highly accurate information on food source usage among children in Baltimore City. Funding is provided by the NICHD U-54 Grant #1U54HD070725-02.

  9. Contributions of the food irradiation technology to the nutritional and alimentary safety

    International Nuclear Information System (INIS)

    Ferreira, Sonia Regina Schauffert

    1999-01-01

    This work is a bibliographic review about the contributions of the food irradiation technology on nutritional and alimentary safety. Subjected to research and development for more than 60 years, these technology was approved by a jointly FAO/WHO/IAEA Expert Committees in 1980 with the conclusion that the irradiation of food up to an overall average dose of 10 kGy present no toxicological hazard and introduce no special nutritional or microbiological problems. Following these conclusions general standards and practices for food irradiation were adopted by the Codex Alimentarium Commission in 1983, opening the possibilities for internal applications and international commerce of irradiated food in many countries. Radiation from radioisotopes sources, electron accelerators or X-ray generators can be applied to food in order to reduce the microbial load, insect disinfestation, improving the shelf life extension of the products. Absorbed doses up to 10 kGy level do not introduce significant alterations in the macro or micro nutrients contents or in the sensorial characteristic of irradiated food. Although food safety can be related with many other important topics, irradiation technology improving food quality, reducing food spoilage during preservation and preventing problems related with food borne disease present a good potential to contribute with the foment and guaranty of the nutritional and alimentary safety. (author)

  10. Sports Nutrition Food Industry Chain Development Research

    OpenAIRE

    Jie Yin

    2015-01-01

    Through the study of Henan sports nutrition food industry chain optimization, the study analyses development advantage and competitive advantage of Henan in sports nutrition food industry chain and existing problems and challenges in Henan sports nutrition food industry chain and at the same time introduces the theory of supply chain management to the development of sports nutrition food industry chain, clearly optimizes countermeasures of sports nutrition food industry chain. Pointing out sp...

  11. The formalization of innovative processes of food technology equipment

    Directory of Open Access Journals (Sweden)

    V. A. Panfilov

    2016-01-01

    Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

  12. A techno-managerial approach in food quality management research

    NARCIS (Netherlands)

    Luning, P.A.; Marcelis, W.J.

    2006-01-01

    In this article it is discussed that food quality management issues are much more complex than often assumed and that it requires a specific research approach. It is argued that food quality management deals with dynamic and complex food systems and people systems involved in realising food quality.

  13. Electron Beam Technology and Other Irradiation Technology Applications in the Food Industry.

    Science.gov (United States)

    Pillai, Suresh D; Shayanfar, Shima

    2017-02-01

    Food irradiation is over 100 years old, with the original patent for X-ray treatment of foods being issued in early 1905, 20 years after there discovery by W. C. Roentgen in 1885. Since then, food irradiation technology has become one of the most extensively studied food processing technologies in the history of mankind. Unfortunately, it is the one of the most misunderstood technologies with the result that there are rampant misunderstandings of the core technology, the ideal applications, and how to use it effectively to derive the maximum benefits. There are a number of books, book chapters, and review articles that provide overviews of this technology [25, 32, 36, 39]. Over the last decade or so, the technology has come into greater focus because many of the other pathogen intervention technologies have been unable to provide sustainable solutions on how to address pathogen contamination in foods. The uniqueness of food irradiation is that this technology is a non-thermal food processing technology, which unto itself is a clear high-value differentiator from other competing technologies.

  14. Emotions in consumer research : An application to novel food products

    NARCIS (Netherlands)

    Laros, F.J.M.

    2006-01-01

    During the last decades the general public has been confronted with a continuous stream of radically new food products as well as technologies that can be used to improve food production and food products. It is rather difficult, however, to convince consumers to accept these new products. For

  15. Application of Proteomics in Food Technology and Food Biotechnology: Process Development, Quality Control and Product Safety

    Directory of Open Access Journals (Sweden)

    Dajana Gašo-Sokač

    2010-01-01

    Full Text Available Human food is a very complex biological mixture and food processing and safety are very important and essential disciplines. Proteomics technology using different high-performance separation techniques such as two-dimensional gel electrophoresis, one-dimensional and multidimensional chromatography, combined with high-resolution mass spectrometry has the power to monitor the protein composition of foods and their changes during the production process. The use of proteomics in food technology is presented, especially for characterization and standardization of raw materials, process development, detection of batch-to-batch variations and quality control of the final product. Further attention is paid to the aspects of food safety, especially regarding biological and microbial safety and the use of genetically modified foods.

  16. Feed an food from desert environments. [Controlled environmental agricultural technology

    Energy Technology Data Exchange (ETDEWEB)

    Bassham, J.A.

    1977-09-01

    Research programs on controlled environmental agricultural technology to allow a broad range of conventional and unconventional crops to be grown with very limited supplies of fresh or brackish water are reviewed. The use of water derived from the sea, from saline lakes, or from waste water treatment for crops in arid lands is discussed. Plant breeding programs to improve the nutritional value of food crops and irrigation systems to improve plant productivity are discussed. The production of liquid hydrocarbons and lubricating oils from plant species such as Euphorbic and Jojoba, and the use of leguminous plants such as mesquite (Prosopis juliflora), and other native plants, which thrive in arid regions, as important sources of proteins and carbohydrates are cited as examples of the productive potential of arid lands. 41 references.

  17. Information and technology: Improving food security in Uganda ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2014-06-23

    Jun 23, 2014 ... Information and technology: Improving food security in Uganda ... knowledge to make decisions about planting, harvesting, and managing livestock, but ... to be effective for minimizing risks and increasing agricultural productivity. ... In time, this network of information – made possible by digital technology ...

  18. Alternative food-preservation technologies: efficacy and mechanisms.

    Science.gov (United States)

    Lado, Beatrice H; Yousef, Ahmed E

    2002-04-01

    High-pressure processing, ionizing radiation, pulsed electric field and ultraviolet radiation are emerging preservation technologies designed to produce safe food, while maintaining its nutritional and sensory qualities. A sigmoid inactivation pattern is observed in most kinetic studies. Damage to cell membranes, enzymes or DNA is the most commonly cited cause of death of microorganisms by alternative preservation technologies.

  19. 78 FR 20664 - Society of Clinical Research Associates-Food and Drug Administration: Food and Drug...

    Science.gov (United States)

    2013-04-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] Society of Clinical Research Associates-Food and Drug Administration: Food and Drug Administration Clinical Trial Requirements, Regulations, Compliance, and Good Clinical Practice AGENCY: Food and Drug...

  20. The Rise of the Food Risk Society and the Changing Nature of the Technological Treadmill

    Directory of Open Access Journals (Sweden)

    Lioudmila Chatalova

    2016-06-01

    Full Text Available Economic development of transition and developed countries is associated with increasingly unhealthy dietary habits among low-income population segments. Drawing on Ulrich Beck’s sociological theory of risk society, the present research note calls attention to the positive relation between national economic development and food risks that result in the rise of food-related diseases and healthcare costs. On this basis, we argue that the knowledge-intensive agribusiness may translate Cochrane’s technological treadmill into Beck’s risk treadmill that shifts a growing share of food-related healthcare costs from producers toward consumers, state, and the healthcare system. This argument motivates a novel research program dealing with the “food risk treadmill” that emerges in response to modern farming and agribusiness practices. Awareness of the food risk treadmill may help to streamline the development of agricultural science and to prevent it from being excessively dominated by the agricultural and food industry.

  1. Thermodynamics, transport phenomena, and electrochemistry of external field-assisted nonthermal food technologies.

    Science.gov (United States)

    Misra, N N; Martynenko, Alex; Chemat, Farid; Paniwnyk, Larysa; Barba, Francisco J; Jambrak, Anet Režek

    2018-07-24

    Interest in the development and adoption of nonthermal technologies is burgeoning within the food and bioprocess industry, the associated research community, and among the consumers. This is evident from not only the success of some innovative nonthermal technologies at industrial scale, but also from the increasing number of publications dealing with these topics, a growing demand for foods processed by nonthermal technologies and use of natural ingredients. A notable feature of the nonthermal technologies such as cold plasma, electrohydrodynamic processing, pulsed electric fields, and ultrasound is the involvement of external fields, either electric or sound. Therefore, it merits to study the fundamentals of these technologies and the associated phenomenon with a unified approach. In this review, we revisit the fundamental physical and chemical phenomena governing the selected technologies, highlight similarities, and contrasts, describe few successful applications, and finally, identify the gaps in research.

  2. Microencapsulation: concepts, mechanisms, methods and some applications in food technology

    Directory of Open Access Journals (Sweden)

    Pablo Teixeira da Silva

    2014-07-01

    Full Text Available Microencapsulation is a process in which active substances are coated by extremely small capsules. It is a new technology that has been used in the cosmetics industry as well as in the pharmaceutical, agrochemical and food industries, being used in flavors, acids, oils, vitamins, microorganisms, among others. The success of this technology is due to the correct choice of the wall material, the core release form and the encapsulation method. Therefore, in this review, some relevant microencapsulation aspects, such as the capsule, wall material, core release forms, encapsulation methods and their use in food technology will be briefly discussed.

  3. Factors affecting food security and contribution of modern technologies in food sustainability.

    Science.gov (United States)

    Premanandh, Jagadeesan

    2011-12-01

    The concept of food insecurity is complex and goes beyond the simplistic idea of a country's inability to feed its population. The global food situation is redefined by many driving forces such as population growth, availability of arable lands, water resources, climate change and food availability, accessibility and loss. The combined effect of these factors has undeniably impacted global food production and security. This article reviews the key factors influencing global food insecurity and emphasises the need to adapt science-based technological innovations to address the issue. Although anticipated benefits of modern technologies suggest a level of food production that will sustain the global population, both political will and sufficient investments in modern agriculture are needed to alleviate the food crisis in developing countries. In this globalised era of the 21st century, many determinants of food security are trans-boundary and require multilateral agreements and actions for an effective solution. Food security and hunger alleviation on a global scale are within reach provided that technological innovations are accepted and implemented at all levels. Copyright © 2011 Society of Chemical Industry.

  4. Selected finelings on current research into applications of ionizing radiation in food industry

    International Nuclear Information System (INIS)

    Salkova, Z.

    1979-01-01

    A review is presented of research of the application of ionizing radiation in the food industry, mainly for the inhibition of potato and onion germination and for radappertization of soft fruits. Current laws governing the irradiation of food are described and the current knowledge of the practical application of the new technology is indicated. (author)

  5. Improving food security and nutrition through research | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Informing policy through agriculture and food security research. Improving the uptake of agricultural and food security research into policy and practice is a central objective of IDRC's Agriculture and Food Security program. To maximize the impact of proven solutions, the program set out to inform and engage both Canadian ...

  6. Intelligent food packaging - research and development

    OpenAIRE

    Renata Dobrucka; Ryszard Cierpiszewski; Andrzej Korzeniowski

    2015-01-01

    Packaging also fosters effective marketing of the food through distribution and sale channels. It is of the utmost importance to optimize the protection of the food, a great quality and appearance - better than typical packaged foods. In recent years, intelligent packaging became very popular. Intelligent packaging is becoming more and more widely used for food products. Application of this type of solution contributes to improvement of the quality consumer life undoubtedly. Intelligent packa...

  7. Thermometric consideration for RF and microwave research in food engineering.

    Science.gov (United States)

    Ofoli, R Y

    1986-01-01

    A review of thermometric methods for the processing of food materials at RF and microwave frequencies is presented. Some areas of needed food engineering research are discussed, as well as factors of importance in the selection of temperature monitoring systems.

  8. Transforming research for food and health in Europe.

    Science.gov (United States)

    McCarthy, M

    2012-10-01

    Eating causes up to a quarter of premature deaths from chronic diseases in Europe through poor diet and excess consumption. FAHRE (Food and Health Research in Europe) was funded to determine needs and gaps in research structures and programmes. Most food research links towards agriculture and the environmental sciences, whereas most health research links towards clinical diseases, biochemical pathways and biology. Research on food and health together includes food safety research addressing biological and chemical contaminants, and biotechnology research supporting clinical nutrition. Research for healthy eating must draw on social and behavioural sciences for studies of policy, regulation and interventions. The food industry, across production, retail and catering, must be part of the research programme, and civil society. Better coordination and improved levels of funding are needed in the coming European research programme 'Horizon 2020', and national programmes linked in the Joint Programming Initiative. Transforming the research agenda can give great benefits to Europe's citizens.

  9. FY2012 Engineering Research & Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, Monya

    2014-07-22

    This report documents engineering research, development, and technology advancements performed by LLNL during fiscal year 2012 in the following areas: computational engineering, engineering information systems, micro/nano-devices and structures, and measurement technologies.

  10. Development of Functional Foods and Advanced Technology for Radioprotection

    International Nuclear Information System (INIS)

    Jo, Sung Kee; Byun, Myung Woo; Kim, Jin Kyu

    2003-05-01

    We have previously developed two medicinal herb mixtures that protects immune/hematopoietic system and self-renewal tissues against irradiation and enhances immune/hematopoietic functions. In this study, we have developed two pilot products by adding the effective fractions to the hot water extract of the herb mixtures and investigated their efficacy. In irradiated mice, pilot products protected hematopoietic stem cells, promoted the regeneration and activation of immune cells, normalized the unbalanced immune reaction, and inhibited the growth of cancer cells. Polysaccharide was active fraction and mechanisms were elucidated. The products also protected the stem cells in self-renewal tissues. DNA/membrane damages, apoptotic cell signals, chromosome/DNA alterations, and oxidation of protein/lipid were inhibited by pilot products, and their radical scavenging activities were observed. Five active components were isolated and identified. Pilot products also inhibited the cancer development by 30% in irradiated mice. In clinical investigation, pilot products inhibited the side-effects of cancer therapy including immune/hematopoietic depression. Therefore, the pilot products may be used as functional foods for overcoming of immune/hematopoietic depression and self-renewal tissue damages induced by irradiation, as well as for the immune/hematopoietic enhancement. Also we have screened food materials for inhibition of radiation-induced chronic damage (carcinogenesis), and selected effective 4 materials and elicited two mixture preparations with enhanced activity, and confirmed their inhibitory activities in cancer initiation model systems. To obtain the applicability of radiation technology for the safe sanitation and distribution of functional food materials, we verified the toxicological safety, stability of activity and active components of irradiated medicinal herbs. Also, screening of new radioprotective materials and basic biological research for the enhancement of

  11. Critical technologies research: Opportunities for DOE

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Recent studies have identified a number of critical technologies that are essential to the nation`s defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy`s Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE`s capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

  12. Critical technologies research: Opportunities for DOE

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Recent studies have identified a number of critical technologies that are essential to the nation's defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy's Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE's capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

  13. Successful development of satiety enhancing food products: towards a multidisciplinary agenda of research challenges.

    Science.gov (United States)

    Van Kleef, E; Van Trijp, J C M; Van Den Borne, J J G C; Zondervan, C

    2012-01-01

    In the context of increasing prevalence of overweight and obesity in societies worldwide, enhancing the satiating capacity of foods may help people control their energy intake and weight. This requires an integrated approach between various food-related disciplines. By structuring this approach around the new product development process, this paper aims to present the contours of such an integrative approach by going through the current state of the art around satiety enhancing foods. It portrays actual food choice as the end result of a complex interaction between internal satiety signals, other food benefits, and environmental cues. Three interrelated routes to satiating enhancement are to change the food composition to develop stronger physiological satiation and satiety signals, anticipate and build on smart external stimuli at the moment of purchase and consumption, and improve palatability and acceptance of satiety enhanced foods. Key research challenges in achieving these routes in the field of nutrition, food technology, consumer, marketing, and communication are outlined.

  14. Successful Development of Satiety Enhancing Food Products: Towards a Multidisciplinary Agenda of Research Challenges

    Science.gov (United States)

    Van Kleef, E.; Van Trijp, J.C.M.; Van Den Borne, J.J.G.C.; Zondervan, C.

    2012-01-01

    In the context of increasing prevalence of overweight and obesity in societies worldwide, enhancing the satiating capacity of foods may help people control their energy intake and weight. This requires an integrated approach between various food-related disciplines. By structuring this approach around the new product development process, this paper aims to present the contours of such an integrative approach by going through the current state of the art around satiety enhancing foods. It portrays actual food choice as the end result of a complex interaction between internal satiety signals, other food benefits, and environmental cues. Three interrelated routes to satiating enhancement are to change the food composition to develop stronger physiological satiation and satiety signals, anticipate and build on smart external stimuli at the moment of purchase and consumption, and improve palatability and acceptance of satiety enhanced foods. Key research challenges in achieving these routes in the field of nutrition, food technology, consumer, marketing, and communication are outlined. PMID:22530713

  15. Building Technologies Research and Integration Center (BTRIC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

  16. The Research of Food Preservation by Irradiation and Its Industrialization in Korea

    International Nuclear Information System (INIS)

    Cho, Han Ok

    1987-01-01

    Since the late 1960s, radiation effects on the storage of potatoes, strawberry, grapes and rice have been investigated on an experimental basis in Korea, Based on the research results of batch scale storage for sprouting food (potatoes, onions, chestnuts) and white ginseng powder by the Korea Advanced Energy Research Institute (KAERI) and on the recommendation. Food irradiation is a new process that may provide an alternative to existing food processes. From the extensive research in food irradiation for more than three decades by leading international organizations and advanced countries, the efficacy of a number of applications has been established, including sprout inhibition, disinfestation of insects, sterilization, delay of ripening, and improvement of organoleptic properties in food. Owing to the recommendation on the Wholesomeness of Irradiated Food by the Joint FAO/IAEA/W/o Expert Committee in 1980 and the adaption of the Codex General Standard for Irradiated Food by the Codex Allurements Commission in 1983, as of May 1985, thirty-two countries have officially approved 227 food items in 73 food groups as safe for human consumption. Food irradiation processing is increasingly recognized as a viable technology for reducing the overall quantity of spoiled food, reducing energy used in food storage, and reducing reliance on chemicals currently used

  17. Electric technology in the food service industry; Les technologies electriques dans les services alimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Labonte, A. [Hydro-Quebec, Montreal, PQ (Canada)

    1997-04-01

    Many innovative technologies in the food service industry have been made through the use of electricity as a source of energy. Electricity made it possible to improve the productivity and profitability of the food industry. Some of these technologies include: (1) cooking by induction, which is based on the principle of magnetic fields, (2) combined convection ovens which accelerate thermal exchange, and (3) electric fryers. The advantages of each technology were described. The environmental advantage of using electricity as an energy source in the food service industry was also discussed.

  18. Concepts and procedures for mapping food and health research infrastructure

    DEFF Research Database (Denmark)

    Brown, Kerry A.; Timotijević, Lada; Geurts, Marjolein

    2017-01-01

    be achieved in the area of food and health has, to date, been unclear. Scope and approach This commentary paper presents examples of the types of food and health research facilities, resources and services available in Europe. Insights are provided on the challenge of identifying and classifying research...... infrastructure. In addition, suggestions are made for the future direction of food and health research infrastructure in Europe. These views are informed by the EuroDISH project, which mapped research infrastructure in four areas of food and health research: Determinants of dietary behaviour; Intake of foods....../nutrients; Status and functional markers of nutritional health; Health and disease risk of foods/nutrients. Key findings and conclusion There is no objective measure to identify or classify research infrastructure. It is therefore, difficult to operationalise this term. EuroDISH demonstrated specific challenges...

  19. Research Award: Food, Environment and Health

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    economic value/impact, multi-sector action, and environmental sustainability. FEH ... interventions to different actors in the food system, and the value and impact of changes in food ... (government, civil society and private sectors). While it ... exploring how public policy interventions can support healthy and sustainable diets.

  20. An Interview with Food Policy Researcher Caitlin Boon

    Science.gov (United States)

    Sullivan, Megan

    2010-01-01

    From safety to nutrition, food policy researchers work to improve what we eat. They examine evidence found by experts in food science, consumer behavior, taste perception, nutrition, and many other related fields. Using this information, these scientists help the food industry, government, and public improve the quality, safety, and sustainability…

  1. The Research Comment on Organic Food Consumer Behavior

    Institute of Scientific and Technical Information of China (English)

    Jin; WANG; Pengcheng; LIU

    2014-01-01

    Since the development of organic food,to a great extent,depends on the needs of consumers,the studies on the consumer behavior of organic food would have far-reaching significance to the development of the whole organic food industry. The recent studies in this field mainly include the following four aspects: the consumers’ recognition of organic food; the consumers’ attitude towards organic food; the consumers’ purchase of organic food; the consumers’ willingness to pay. The paper would review the recent domestic and foreign studies on the four aspects mentioned above,aiming to provide references to the researches in this field.

  2. Research needs of the new accelerator technologies

    International Nuclear Information System (INIS)

    Sessler, A.M.

    1982-08-01

    A review is given of some of the new accelerator technologies with a special eye to the requirements which they generate for research and development. Some remarks are made concerning the organizational needs of accelerator research

  3. Oil Pollution Research and Technology Plan

    Science.gov (United States)

    1997-04-01

    Title VII of the Oil Pollution Act of 1990 (OPA 90) established the thirteen member Interagency Coordinating Committee on Oil Pollution Research (Committee). The Committee is charged with coordinating a comprehensive program of research, technology d...

  4. Gaming Research for Technology Education

    Science.gov (United States)

    Clark, Aaron C.; Ernst, Jeremy

    2009-01-01

    This study assesses the use of gaming to teach Science, Technology, Engineering, and Mathematics (STEM) in public education. The intent of the investigation was to identify attitudes about gaming and its use in education, as well as the need to utilize gaming as a platform to serve as an integrator of STEM subject matter. Participants included…

  5. National Rehabilitation Hospital Assistive Technology Research Center

    Science.gov (United States)

    1995-10-01

    Shoulder-Arm Orthoses Several years ago, the Rehabilitation Engineering Research Center (RERC) on Rehabilitation Robotics in Delaware1 identified a... exoskeletal applications for persons with disabilities. 2. Create a center of expertise in rehabilitation technology transfer that benefits persons with...AD COOPERATIVE AGREEMENT NUMBER: DAMD17-94-V-4036 TITLE: National Rehabilitation Hospital Assistive Technology- Research Center PRINCIPAL

  6. Retail food environments research in Canada: A scoping review.

    Science.gov (United States)

    Minaker, Leia M; Shuh, Alanna; Olstad, Dana L; Engler-Stringer, Rachel; Black, Jennifer L; Mah, Catherine L

    2016-06-09

    The field of retail food environments research is relatively new in Canada. The objective of this scoping review is to provide an overview of retail food environments research conducted before July 2015 in Canada. Specifically, this review describes research foci and key findings, identifies knowledge gaps and suggests future directions for research. A search of published literature concerning Canadian investigations of retail food environment settings (food stores, restaurants) was conducted in July 2015 using PubMed, Web of Science, Scopus, PsychInfo and ERIC. Studies published in English that reported qualitative or quantitative data on any aspect of the retail food environment were included, as were conceptual papers and commentaries. Eighty-eight studies were included in this review and suggest that the field of retail food environments research is rapidly expanding in Canada. While only 1 paper was published before 2005, 66 papers were published between 2010 and 2015. Canadian food environments research typically assessed either the socio-economic patterning of food environments (n = 28) or associations between retail food environments and diet, anthropometric or health outcomes (n = 33). Other papers profiled methodological research, qualitative studies, intervention research and critical commentaries (n = 27). Key gaps in the current literature include measurement inconsistency among studies and a lack of longitudinal and intervention studies. Retail food environments are a growing topic of research, policy and program development in Canada. Consistent methods (where appropriate), longitudinal and intervention research, and close partnerships between researchers and key stakeholders would greatly advance the field of retail food environments research in Canada.

  7. Teaching and research opportunities in technology entrepreneurship

    OpenAIRE

    Mosey, Simon

    2016-01-01

    Technology entrepreneurship as a discipline of study has come of age. The international research community is no longer debating what technology entrepreneurship means or spending time justifying its importance. We are rather engaged in building theory to encourage and enhance technology entrepreneurship in those organisations and institutions that wish to do so. In this paper, we define technology entrepreneurship as the interface between the more established academic fields of entrepreneurs...

  8. 1997 Annual report. Technological Research Direction

    International Nuclear Information System (INIS)

    Instituto Nacional de Investigaciones Nucleares

    1998-01-01

    This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

  9. Resilience in the Romanian Food Industry. Preliminary Research

    Directory of Open Access Journals (Sweden)

    Silvius STANCIU

    2015-12-01

    Full Text Available Critical situations occurring in the food chain represent a cause for concern for companies, consumers and government authorities. Food product supply continuity assurance is supported by economic considerations coming from producers or food product merchants, by the increasing demand that exists on the market or by the political implications regarding food security assurance among the population. The study focuses on assessing the extent to which the food sector economic agents are prepared to face potential critical situations in the unfolding of their business activities. In Romania there haven’t been carried out any studies regarding food chain resilience regarding critical incidents and the economic impact of these incidents on the food sector. The main objective of the research was the Romanian food chain resilience assessment to critical situations, having a highly applicative character. It was based on questionnaires given to a representative sample of companies and it highlighted the food companies’ resilience to critical situations. The responding economic agents were mainly from the agro-food production, food distribution, food production and distribution, and other related domains. The research regarding food chain resilience to critical situations in Romania showed a primary character of the concept; therefore, this sector must be developed both at a strategic and operational level.

  10. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship

    Directory of Open Access Journals (Sweden)

    Dean Wesley R

    2012-05-01

    Full Text Available Abstract Introduction Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Methods Field notes were provided by teams of promotora-researchers (indigenous community health workers and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Results Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on

  11. Cultural repertoires and food-related household technology within colonia households under conditions of material hardship.

    Science.gov (United States)

    Dean, Wesley R; Sharkey, Joseph R; Johnson, Cassandra M; St John, Julie

    2012-05-15

    BSTRACT: Mexican-origin women in the U.S. living in colonias (new-destination Mexican-immigrant communities) along the Texas-Mexico border suffer from a high incidence of food insecurity and diet-related chronic disease. Understanding environmental factors that influence food-related behaviors among this population will be important to improving the well-being of colonia households. This article focuses on cultural repertoires that enable food choice and the everyday uses of technology in food-related practice by Mexican-immigrant women in colonia households under conditions of material hardship. Findings are presented within a conceptual framework informed by concepts drawn from sociological accounts of technology, food choice, culture, and material hardship. Field notes were provided by teams of promotora-researchers (indigenous community health workers) and public-health professionals trained as participant observers. They conducted observations on three separate occasions (two half-days during the week and one weekend day) within eight family residences located in colonias near the towns of Alton and San Carlos, Texas. English observations were coded inductively and early observations stressed the importance of technology and material hardship in food-related behavior. These observations were further explored and coded using the qualitative data package Atlas.ti. Technology included kitchen implements used in standard and adapted configurations and household infrastructure. Residents employed tools across a range of food-related activities identified as forms of food acquisition, storage, preparation, serving, feeding and eating, cleaning, and waste processing. Material hardships included the quality, quantity, acceptability, and uncertainty dimensions of food insecurity, and insufficient consumption of housing, clothing and medical care. Cultural repertoires for coping with material hardship included reliance on inexpensive staple foods and dishes, and

  12. Energy Address Delivery Technologies and Thermal Transformations in Food Production

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2016-08-01

    Full Text Available In this article, energetic and technical paradoxes in food nanotechnologies and traditional approaches to evaluation of energy recourses using are considered. Hypotheses of improvement of food production energy technologies are formulated. Classification of principles of address delivery of energy to food raw materials elements is given. We had substantiated the perspective objectives for heat-pumps installations and biphasic heat-transfer systems. The energy efficiency of new technolo-gies is compared on base of the number of energy impact. Principles of mass transfer modeling in ex-traction, dehydration and pasteurization combined processes are considered by food production exam-ple. The objectives of mathematical modeling of combined hydrodynamic and heat and mass transfer processes in modern energy technologies are set. The fuel energy conversion diagrams for drying, in-novative installations on the base of thermal siphons, heat pumps and electromagnetic energy genera-tors are represented. In this article, we illustrate how electromagnetic field, biphasic heat-transfer sys-tems and heat pumps can be effective tools for energy efficiency technologies.

  13. Explicit and implicit attitude toward an emerging food technology

    NARCIS (Netherlands)

    Bekker, Gerben A.; Fischer, Arnout R.H.; Tobi, Hilde; Trijp, van Hans C.M.

    2017-01-01

    Cultured meat is an unfamiliar emerging food technology that could provide a near endless supply of high quality protein with a relatively small ecological footprint. To understand consumer acceptance of cultured meat, this study investigated the influence of information provision on the explicit

  14. Potential benefits of genetic modification (GM) technology for food ...

    African Journals Online (AJOL)

    We assessed the perception of farmers towards potential adoption of genetic modification (GM) technology for improving health, food security and agricultural productivity using a semi-structured interview. A total sample of 54 small-scale farmers participated in 6 focus group meetings (FGMs) and 23 in-depth interviews at ...

  15. Agricultural extension, technology adoption and household food security

    NARCIS (Netherlands)

    Santos Rocha, Jozimo

    2017-01-01

    In this thesis, I use experimental and quasi-experimental data from 25 villages and a total of 1,105 farmers from eastern DRC to investigate the relationship among agricultural training, the adoption of agricultural technologies, crop productivity, and household food insecurity and dietary

  16. ANNEX A: RESEARCH FOR FOOD SECURITY

    International Development Research Centre (IDRC) Digital Library (Canada)

    rvernooy

    2013-04-05

    Apr 5, 2013 ... CIDA's aim is to i) manage Canada's support and ... Food and nutritional insecurity, climate change, new and emerging diseases, and the .... groups). All projects require the sound assessment of environmental impact and the.

  17. Research and Technology Report: 1997

    Science.gov (United States)

    Sakimoto, Philip; Friedman, Jonathan (Editor)

    1997-01-01

    This volume highlights the most significant results from research and development projects sponsored through NASA's Office of Equal Opportunity Programs, Minority University Research and Education Division, in collaboration with Headquarters Program Offices, during Academic Year 1996-97 and Summer 1996. It includes the work of major multidisciplinary research groups, such as those sponsored under NASA's University Research Centers at Minority Institutions and Institutional Research Awards programs, as well as that of individual principal investigators sponsored under the Faculty Awards for Research or other MUREP programs. It encompasses contributions from 863 students and 388 faculty-level researchers at institutions eligible to compete for MUREP funding, including: Historically Black Colleges and Universities (HBCU), Hispanic-Serving Institutions (HSI), Tribal Colleges and Universities (TCU), and accredited minority colleges or universities with a 50 percent or greater underrepresented minority student enrollment. It stands as a testimony to NASA's response to Executive Orders 12876, 12900, and 13021, which mandate increased Federal support to these classes of institutions. We firmly believe that maintaining America's leadership in aerospace and related areas depends on fully utilizing the talents available at the Nation's minority universities.

  18. Korea-China Optical Technology Research Centre

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Cha, H. K.; Rhee, Y. J. (and others)

    2007-04-15

    The main objectives of this project are to develop cooperative channel by personnel exchanges between industrial, educational and research partners of Korea and China on the fields of optical technologies which are the basis of optical industry and being spot-lighted as new industry of 21th century, and to raise the class of Korean optical technology up to world class by utilization of Chinese large facilities through the cooperative research between the optical technology institutions of both sides. To attain the goals mentioned above, we carried out the cooperative researches between the Korean and Chinese optical technology institutions in the following 7 fields; ? research cooperation between KAERI-SITP for the quantum structured far-IR sensor technology - research cooperation for the generation of femtosecond nuclear fusion induced neutrons - research cooperation between KAERI-AIOFM for laser environment analysis and remote sensing technology - research cooperation between KAERI-SIOM for advanced diode-pumped laser technology - cooperative research related on linear and nonlinear magneto-optical properties of advanced magnetic quantum structures - design of pico-second PW high power laser system and its simulation and - cooperative research related on the femto-second laser-plasma interaction physics.

  19. Korea-China Optical Technology Research Centre

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Cha, H. K.; Rhee, Y. J.

    2007-04-01

    The main objectives of this project are to develop cooperative channel by personnel exchanges between industrial, educational and research partners of Korea and China on the fields of optical technologies which are the basis of optical industry and being spot-lighted as new industry of 21th century, and to raise the class of Korean optical technology up to world class by utilization of Chinese large facilities through the cooperative research between the optical technology institutions of both sides. To attain the goals mentioned above, we carried out the cooperative researches between the Korean and Chinese optical technology institutions in the following 7 fields; ? research cooperation between KAERI-SITP for the quantum structured far-IR sensor technology - research cooperation for the generation of femtosecond nuclear fusion induced neutrons - research cooperation between KAERI-AIOFM for laser environment analysis and remote sensing technology - research cooperation between KAERI-SIOM for advanced diode-pumped laser technology - cooperative research related on linear and nonlinear magneto-optical properties of advanced magnetic quantum structures - design of pico-second PW high power laser system and its simulation and - cooperative research related on the femto-second laser-plasma interaction physics

  20. CRISPR-Cas Technologies and Applications in Food Bacteria.

    Science.gov (United States)

    Stout, Emily; Klaenhammer, Todd; Barrangou, Rodolphe

    2017-02-28

    Clustered regularly interspaced short palindromic repeats (CRISPRs) and CRISPR-associated (Cas) proteins form adaptive immune systems that occur in many bacteria and most archaea. In addition to protecting bacteria from phages and other invasive mobile genetic elements, CRISPR-Cas molecular machines can be repurposed as tool kits for applications relevant to the food industry. A primary concern of the food industry has long been the proper management of food-related bacteria, with a focus on both enhancing the outcomes of beneficial microorganisms such as starter cultures and probiotics and limiting the presence of detrimental organisms such as pathogens and spoilage microorganisms. This review introduces CRISPR-Cas as a novel set of technologies to manage food bacteria and offers insights into CRISPR-Cas biology. It primarily focuses on the applications of CRISPR-Cas systems and tools in starter cultures and probiotics, encompassing strain-typing, phage resistance, plasmid vaccination, genome editing, and antimicrobial activity.

  1. The influence of organic production on food quality - research findings, gaps and future challenges

    DEFF Research Database (Denmark)

    Załęcka, Aneta; Bügel, Susanne Gjedsted; Paoletti, Flavio

    2014-01-01

    in order to identify research gaps and suggest future research challenges. Organic food is described according to a quality model already published. The influence of organic production on food quality is structured in primary production and processing. Furthermore, organic food authentication is discussed...... with so called 'conventional' food seems not to be appropriate, because 'conventional' is not defined. In organic food quality research a system approach is needed from which systemic markers can be selected. Research on the impact of processing technologies on the quality according to organic principles...

  2. Future development, innovation and promotion of European unique food: an interdisciplinary research framework perspective.

    Science.gov (United States)

    Byrne, Derek V; Waehrens, Sandra S; O'Sullivan, Maurice G

    2013-11-01

    Unique food products constitute a very important element of European food business, culture, identity and heritage. Understanding the uniqueness of food in Europe from a research-based interdisciplinary perspective will be a critical factor in promoting the competitiveness of artisanal food industries going forward both locally and internationally. Success will support the competitiveness of the European food industry, in particular, small and medium enterprises, by enabling substantial product differentiation potential for producers and providing ample variety in food choice for the consumer. In addition, it will contribute to promotion of sustainable agriculture and development of rural areas, protecting them from depopulation. In order to meet the demands of a developing fundamental shift in European Union agricultural focus to greener, sustainable farming practices and wider rural development and to ensure success for local small-scale producers, this paper discusses the future direction of research in the field of unique European foods. The paper presents a perspective which promotes optimisation and innovation in unique food products in Europe through the integration of advanced knowledge and technologies. A framework is presented covering location, identity, perception and well-being as research areas needing synergy to bridge the research knowledge deficit in determination and specification of food identity in the European Union. The ultimate aim being promotion of sustainable agriculture and rural development, particularly in territories across the European Union where unique food is strategically and scientifically under-defined. © 2013 Society of Chemical Industry.

  3. The Role of Emerging Technologies in Improving Energy Efficiency:Examples from the Food Processing Industry

    Energy Technology Data Exchange (ETDEWEB)

    Lung, Robert Bruce; Masanet, Eric; McKane, Aimee

    2006-05-01

    For over 25 years, the U.S. DOE's Industrial Technologies Program (ITP) has championed the application of emerging technologies in industrial plants and monitored these technologies impacts on industrial energy consumption. The cumulative energy savings of more than 160 completed and tracked projects is estimated at approximately 3.99 quadrillion Btu (quad), representing a production cost savings of $20.4 billion. Properly documenting the impacts of such technologies is essential for assessing their effectiveness and for delivering insights about the optimal direction of future technology research. This paper analyzes the impacts that several emerging technologies have had in the food processing industry. The analysis documents energy savings, carbon emissions reductions and production improvements and assesses the market penetration and sector-wide savings potential. Case study data is presented demonstrating the successful implementation of these technologies. The paper's conclusion discusses the effects of these technologies and offers some projections of sector-wide impacts.

  4. Food waste-to-energy conversion technologies: current status and future directions.

    Science.gov (United States)

    Pham, Thi Phuong Thuy; Kaushik, Rajni; Parshetti, Ganesh K; Mahmood, Russell; Balasubramanian, Rajasekhar

    2015-04-01

    Food waste represents a significantly fraction of municipal solid waste. Proper management and recycling of huge volumes of food waste are required to reduce its environmental burdens and to minimize risks to human health. Food waste is indeed an untapped resource with great potential for energy production. Utilization of food waste for energy conversion currently represents a challenge due to various reasons. These include its inherent heterogeneously variable compositions, high moisture contents and low calorific value, which constitute an impediment for the development of robust, large scale, and efficient industrial processes. Although a considerable amount of research has been carried out on the conversion of food waste to renewable energy, there is a lack of comprehensive and systematic reviews of the published literature. The present review synthesizes the current knowledge available in the use of technologies for food-waste-to-energy conversion involving biological (e.g. anaerobic digestion and fermentation), thermal and thermochemical technologies (e.g. incineration, pyrolysis, gasification and hydrothermal oxidation). The competitive advantages of these technologies as well as the challenges associated with them are discussed. In addition, the future directions for more effective utilization of food waste for renewable energy generation are suggested from an interdisciplinary perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. New vision technology for multidimensional quality monitoring of food processes

    DEFF Research Database (Denmark)

    Dissing, Bjørn Skovlund

    be generated using this inductive analytical approach. For the food industry it is an additional advantage that the fast, non-invasive, remote sensing nature of the spectroscopic imaging methods allows on-line measurements. In this way spectroscopic imaging in combination with advanced data analysis meets......Spectroscopy and spectral imaging in combination with multivariate data analysis and machine learning techniques have proven to be an outstanding tool for rapid analysis of different products. This may be utilized in various industries, but especially rapid assessment of food products in food...... research and industry is of importance in this thesis. The non-invasive spectroscopic imaging techniques are able to measure individual food components simultaneously in situ in the food matrix while pattern recognition techniques effectively are able to extract the quantitative information from the vast...

  6. R&D Needs and Opportunities in Food Science and Technology

    Science.gov (United States)

    This is an analysis of the relevant trends, market economics, science and technology needs of the Agricultural Research Service National Program on Quality and Utilization of Agricultural Products (NP 306), specifically issues that impact on the foods aspects of the program. It provides information ...

  7. The FoodCast Research Image Database (FRIDa

    Directory of Open Access Journals (Sweden)

    Francesco eForoni

    2013-03-01

    Full Text Available In recent years we have witnessed to an increasing interest in food processing and eating behaviors. This is probably due to several reasons. The biological relevance of food choices, the complexity of the food-rich environment in which we presently live (making food-intake regulation difficult, and the increasing health care cost due to illness associated with food (food hazards, food contamination, and aberrant food-intake. Despite the importance of the issues and the relevance of this research, comprehensive and validated databases of stimuli are rather limited, outdated, or not available for noncommercial purposes to independent researchers who aim at developing their own research program. The FoodCast Research Image Database (FRIDa we present here is comprised of 877 images from eight different categories: natural-food (e.g., strawberry, transformed-food (e.g., French fries, rotten-food (e.g., moldy banana, natural-nonfood items (e.g., pinecone, artificial food-related objects (e.g., teacup, artificial objects (e.g., guitar, animals (e.g., camel, and scenes (e.g., airport. FRIDa has been validated on a sample of healthy participants (N=73 on standard variables (e.g., valence, familiarity etc. as well as on other variables specifically related to food items (e.g., perceived calorie content; it also includes data on the visual features of the stimuli (e.g., brightness, high frequency power etc.. FRIDa is a well-controlled, flexible, validated, and freely available (http://foodcast.sissa.it/neuroscience/ tool for researchers in a wide range of academic fields and industry.

  8. 2015 Evidence Analysis Library Systematic Review on Advanced Technology in Food Production.

    Science.gov (United States)

    Edge, Marianne Smith; Kunkel, Mary Elizabeth; Schmidt, Jennifer; Papoutsakis, Constantina

    2018-03-08

    In the late 20th century, plant breeders began using molecular biology techniques such as recombinant DNA, also known as genetic engineering, along with traditional cross-breeding. Ten plant and one animal food have been approved for commercialization in the United States. Today, foods and ingredients from genetically engineered (GE) crops are present throughout the food supply, which has led to varying levels of acceptance. Much discussion exists among consumers and health professionals about the believability of statements made regarding benefits or risks of GE foods. The aim of this systematic review was to examine the evidence on the association of consumption of GE foods and ingredients derived from them on human health, specifically allergenicity, food safety, pesticide consumption, nutrient adequacy, inflammation, and antibiotic resistance. An expert panel conducted a systematic review on advanced technology in food production. The 30 developed questions focused on effects of human consumption of GE foods and the effects of human consumption of foods containing pesticide residues on human health. Primary research published from 1994 to 2014 were identified using PubMed and Agricultural Online Access databases. Additional studies were identified by searching references of review articles. Twenty-one studies met the inclusion criteria. Relevant research addressed five of 30 questions. Four questions focused on food allergenicity, the fifth on nutrient adequacy, and all received a Grade III (limited/weak) rating. No human studies addressed 25 questions on the consumption of foods produced using genetic engineering technologies on gene translocation, cancer, food safety, phenotype expression, inflammation and inflammatory markers, or antibiotic resistance. These questions received a Grade V (grade not assignable). Evidence from human studies did not reveal an association between adverse health effects and consumption of foods produced using genetic engineering

  9. Research for food and health in Europe: themes, needs and proposals

    Directory of Open Access Journals (Sweden)

    McKenna Brian

    2011-09-01

    Full Text Available Abstract Background Diet, in addition to tobacco, alcohol and physical exercise, is a major factor contributing to chronic diseases in Europe. There is a pressing need for multidisciplinary research to promote healthier food choices and better diets. Food and Health Research in Europe (FAHRE is a collaborative project commissioned by the European Union. Among its tasks is the description of national research systems for food and health and, in work reported here, the identification of strengths and gaps in the European research base. Methods A typology of nine research themes was developed, spanning food, society, health and research structures. Experts were selected through the FAHRE partners, with balance for individual characteristics, and reported using a standardised template. Results Countries usually commission research on food, and on health, separately: few countries have combined research strategies or programmes. Food and health are also strongly independent fields within the European Commission's research programmes. Research programmes have supported food and bio-technology, food safety, epidemiological research, and nutritional surveillance; but there has been less research into personal behaviour and very little on environmental influences on food choices - in the retail and marketing industries, policy, and regulation. The research is mainly sited within universities and research institutes: there is relatively little published research contribution from industry. Discussion National food policies, based on epidemiological evidence and endorsed by the World Health Organisation, recommend major changes in food intake to meet the challenge of chronic diseases. Biomedical and biotechnology research, in areas such as 'nutrio-genomics', 'individualised' diets, 'functional' foods and 'nutri-pharmaceuticals' appear likely to yield less health benefit, and less return on public investment, than research on population-level interventions

  10. Research for food and health in Europe: themes, needs and proposals.

    Science.gov (United States)

    McCarthy, Mark; Aitsi-Selmi, Amina; Bánáti, Diána; Frewer, Lynn; Hirani, Vasant; Lobstein, Tim; McKenna, Brian; Mulla, Zenab; Rabozzi, Giulia; Sfetcu, Raluca; Newton, Rachel

    2011-09-29

    Diet, in addition to tobacco, alcohol and physical exercise, is a major factor contributing to chronic diseases in Europe. There is a pressing need for multidisciplinary research to promote healthier food choices and better diets. Food and Health Research in Europe (FAHRE) is a collaborative project commissioned by the European Union. Among its tasks is the description of national research systems for food and health and, in work reported here, the identification of strengths and gaps in the European research base. A typology of nine research themes was developed, spanning food, society, health and research structures. Experts were selected through the FAHRE partners, with balance for individual characteristics, and reported using a standardised template. Countries usually commission research on food, and on health, separately: few countries have combined research strategies or programmes. Food and health are also strongly independent fields within the European Commission's research programmes. Research programmes have supported food and bio-technology, food safety, epidemiological research, and nutritional surveillance; but there has been less research into personal behaviour and very little on environmental influences on food choices - in the retail and marketing industries, policy, and regulation. The research is mainly sited within universities and research institutes: there is relatively little published research contribution from industry. National food policies, based on epidemiological evidence and endorsed by the World Health Organisation, recommend major changes in food intake to meet the challenge of chronic diseases. Biomedical and biotechnology research, in areas such as 'nutrio-genomics', 'individualised' diets, 'functional' foods and 'nutri-pharmaceuticals' appear likely to yield less health benefit, and less return on public investment, than research on population-level interventions to influence dietary patterns: for example policies to reduce

  11. Research for food and health in Europe: themes, needs and proposals

    Science.gov (United States)

    2011-01-01

    Background Diet, in addition to tobacco, alcohol and physical exercise, is a major factor contributing to chronic diseases in Europe. There is a pressing need for multidisciplinary research to promote healthier food choices and better diets. Food and Health Research in Europe (FAHRE) is a collaborative project commissioned by the European Union. Among its tasks is the description of national research systems for food and health and, in work reported here, the identification of strengths and gaps in the European research base. Methods A typology of nine research themes was developed, spanning food, society, health and research structures. Experts were selected through the FAHRE partners, with balance for individual characteristics, and reported using a standardised template. Results Countries usually commission research on food, and on health, separately: few countries have combined research strategies or programmes. Food and health are also strongly independent fields within the European Commission's research programmes. Research programmes have supported food and bio-technology, food safety, epidemiological research, and nutritional surveillance; but there has been less research into personal behaviour and very little on environmental influences on food choices - in the retail and marketing industries, policy, and regulation. The research is mainly sited within universities and research institutes: there is relatively little published research contribution from industry. Discussion National food policies, based on epidemiological evidence and endorsed by the World Health Organisation, recommend major changes in food intake to meet the challenge of chronic diseases. Biomedical and biotechnology research, in areas such as 'nutrio-genomics', 'individualised' diets, 'functional' foods and 'nutri-pharmaceuticals' appear likely to yield less health benefit, and less return on public investment, than research on population-level interventions to influence dietary

  12. Recent developments in the food quality detected by non-invasive nuclear magnetic resonance technology.

    Science.gov (United States)

    Fan, Kai; Zhang, Min

    2018-02-16

    Nuclear magnetic resonance (NMR) is a rapid, accurate and non-invasive technology and widely used to detect the quality of food, particularly to fruits and vegetables, meat and aquatic products. This review is a survey of recent developments in experimental results for the quality of food on various NMR technologies in processing and storage over the past decade. Following a discussion of the quality discrimination and classification of food, analysis of food compositions and detection of physical, chemical, structural and microbiological properties of food are outlined. Owing to high cost, low detection limit and sensitivity, the professional knowledge involved and the safety issues related to the maintenance of the magnetic field, so far the practical applications are limited to detect small range of food. In order to promote applications for a broader range of foods further research and development efforts are needed to overcome the limitations of NMR in the detection process. The needs and opportunities for future research and developments are outlined.

  13. Sustainable Disposal of Edible Food Byproducts at University Research Farms

    Science.gov (United States)

    Baldwin, Sherill; Chung, Kimberly

    2007-01-01

    Purpose: Research at agricultural universities often generates food crops that are edible by-products of the research process. The purpose of this paper is to explore the factors that affect decision-making around the disposal of these crops. Understanding decision-making suggests how universities might include food crop production into campus…

  14. The Role of Agricultural Technology in Food and Nutritional Security ...

    African Journals Online (AJOL)

    Strengthening of agricultural research and extension. The development and utilization of profitable and environmentally-friendly technology is an essential factor for the transformation of agriculture into a modern sector. The impact of technology can be attained through the revitalization of agricultural research and extension ...

  15. Progress report for 1978-87 of the Food Technology and Enzyme Engineering Division

    International Nuclear Information System (INIS)

    Adhikari, H.R.; Ninjoor, V.; Satyanarayan, V.

    1988-01-01

    The salient features of the research and development (R and D) activities of the Food Technology and Enzyme Engineering Division of the Bhabha Atomic Research Centre, Bombay, during the decade 1978-1987 are summarized. The Division was a part of the erstwhile Biochemistry and Food Technology which was bifurcated in 1985. The main thrust of the Division's R and D work is directed towards the development of appropriate technologies for radiation preservation of agricultural produce in natural form for prolonged periods without any perceptible change in quality attributes. The suitable parameters have been evolved to apply radiation technology for: (1) arresting sprouting losses in turbers and bulbs, (2) controlling infestation of cereals, spices and ready to eat food items, by insects, microbial pests and pathogens and (3) controlling spoilage of sea foods, fruits and vegetables. It is remarkable to note that the data collected during wholesomeness and toxicological studies of various irradiated food products have been used by the Joint Expert Committee on Food Irradiation of WHO/IAEA/FAO to accord unconditional health and safety clearance to irradiation process using upto 10 KGy radiation doses. The products treated with gamma radiation within this limit do not require toxicological evaluation. The technique for poly-valent radio-vaccine infective diseases in farm animals have been standardized and a vaccine to prevent Salmonella infection in poultry is undergoing field trials in farms. The other activities of the Division are in the fields of enzyme technology, photosynthetic process, and toxicity and genotoxicity of food ingredients and additives. Lists of staff-members of the Division and their publications, their participation in various symposia, seminars, conferences etc. are appended. (M.G.B.)

  16. Overview of Stirling Technology Research at NASA Glenn Research Center

    Science.gov (United States)

    Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

    2016-01-01

    Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

  17. Technology meets research 60 years of CERN technology : selected highlights

    CERN Document Server

    Taylor, Thomas; Treille, Daniel; Wenninger, Horst

    2017-01-01

    "Big" science and advanced technology are known to cross-fertilize. This book emphasizes the interplay between particle physics and technology at CERN that has led to breakthroughs in both research and technology over the laboratory's first 60 years. The innovations, often the work of individuals or by small teams, are illustrated with highlights describing selected technologies from the domains of accelerators and detectors. The book also presents the framework and conditions prevailing at CERN that enabled spectacular advances in technology and contributed to propel the European organization into the league of leading research laboratories in the world. While the book is specifically aimed at providing information for the technically interested general public, more expert readers may also appreciate the broad variety of subjects presented. Ample references are given for those who wish to further explore a given topic.

  18. Technology assessment and the Food and Drug Administration

    Science.gov (United States)

    Kaplan, A. H.; Becker, R. H.

    1972-01-01

    The statutory standards underlying the activities of the FDA, and the problems the Agency faces in decision making are discussed from a legal point of view. The premarketing clearance of new drugs and of food additives, the two most publicized and criticized areas of FDA activity, are used as illustrations. The importance of statutory standards in technology assessment in a regulatory setting is developed. The difficulties inherent in the formulation of meaningful standards are recognized. For foods, the words of the statute are inadequate, and for drugs, a statutory recognition of the various other objectives would be useful to the regulator and the regulated.

  19. Food allergy - science and policy needs - The UK Food Standards Agency Research Programme

    International Nuclear Information System (INIS)

    Buck, Joelle; Hattersley, Sue; Kimber, Ian

    2010-01-01

    Food allergy is a significant health issue in the UK, affecting between 1 and 2% of adults and 5 and 8% of children. The UK Food Standards Agency seeks to ensure the safety of food allergic consumers by providing them with information and guidance on food choices. Since 1995, with the aim of addressing important policy issues and improving the quality of the support and guidance available for food allergic consumers, the Agency (and before that the Ministry of Agriculture, Fisheries and Food), has had a programme of research dedicated to investigating the causes and mechanisms of food allergy and delivering benefits for UK consumers. In this paper, we outline some of the major scientific challenges that the programme has sought to address. We reflect on how the findings have been used as a basis for the development of sound, evidence-based policy and advice for UK consumers, and the current direction of research being supported by the programme.

  20. Computer science research and technology volume 3

    CERN Document Server

    Bauer, Janice P

    2011-01-01

    This book presents leading-edge research from across the globe in the field of computer science research, technology and applications. Each contribution has been carefully selected for inclusion based on the significance of the research to this fast-moving and diverse field. Some topics included are: network topology; agile programming; virtualization; and reconfigurable computing.

  1. KSC Education Technology Research and Development Plan

    Science.gov (United States)

    Odell, Michael R. L.

    2003-01-01

    Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

  2. What's technology cooking up? A systematic review of the use of technology in adolescent food literacy programs.

    Science.gov (United States)

    Wickham, Catherine A; Carbone, Elena T

    2018-06-01

    Over one-third of adolescents are overweight or obese. Food literacy (FL), the ability to plan and manage, select, prepare, and eat healthy foods, is a contemporary concept that provides a mechanism to understand the relationship between food-related knowledge and skills and dietary intake. Innovative interventions which focus on the core concepts of FL and include generationally appropriate technology have the potential to provide positive impact on the dietary habits of adolescents. This systematic review followed PRISMA guidelines and employed the Downs and Black criteria for rating studies. Titles and abstracts of 545 articles were collected and reviewed from 13 electronic databases. Studies were selected if they were peer-reviewed, included adolescents 12-19 years-old, incorporated concepts related to FL, and employed technology as part of the intervention. Eight studies, six randomized controlled trials (RCT) and two interventions without controls were included. Seven of the interventions used Internet or web-based platforms to access program components and all RCTs incorporated game elements. Studies included between two and four constructs of FL. All reported positive changes in food intake with five reporting significant positive pre- and post-intervention changes. Few technology-driven FL-related studies exist within the literature. Although all studies reported improvements in dietary intake, due to variation in program design, delivery, and evaluation it is difficult to tease out the effect of the technology component. Continued research is needed to: 1) determine the degree to which FL should be included in interventions to effect a positive change on dietary intake; 2) develop adolescent-specific FL measures to more appropriately evaluate changes in knowledge, food-related skills, and dietary intake; and 3) design technology-driven interventions so that technology components can be analyzed separately from other program elements. Copyright © 2018

  3. Researches in agri-food supply chain: A bibliometric study

    Science.gov (United States)

    Hisjam, Muhammad; Sutopo, Wahyudi

    2017-11-01

    Agri-food is very important for human being. Problems in managing agri-food are very complicated. There are many entities involved in managing agri-food with conflict of interest between them makes the problems become more complicated. Using supply chain approaches in agri-food will help solving the problems. The purpose of this paper is to show that the publications in agri-food supply chain research area are still promising and to show the research trend in agri-food supply chain. The study was a bibliometric study by using some queries on the website with the largest database of peer-reviewed literature. The queries were using various categories and refinements. Firstly the study was exploring all publications in this research area in some categories and then divided the duration into 2 intervals. The last query was to know how many publications are review type publications. The results show that the number of the publications with agri-food supply chain topics are still limited, and tend to increase. It means researches in this area are still promising. The results also show the most publications are from which source title, country, and affiliation. The results also show the research trend in this research area. The quantities of review type publications in agri-food supply chain are still few. It shows the need for more review type publications in this area.

  4. Research on Food Quality Security of China’s Food Import and Export

    Directory of Open Access Journals (Sweden)

    Pengling Liu

    2014-04-01

    Full Text Available This article researches quality and safety of food at home and abroad on the basis of present situation, cause and effect, from the point of import and export of food quality and safety in China, by combining with economic theories and empirical analysis, from a macro perspective study of China’s import and export food safety issues impact on economic and social development, and study the experience of other developed countries advanced management experience in the quality and safety of food imports and exports. Finally, after the combination of the analysis, make recommendations to protect China’s import and export food safety measures and provide policy proposals.

  5. Research and technology organisations and smart specialisation

    OpenAIRE

    Charles, David; Ciampi Stancova, Katerina

    2015-01-01

    Research and Technology Organisations (RTOs) have developed in many European countries at both national and regional levels to assist in the support of local industry, often around specific industrial technologies or sectors. With a core responsibility for technological upgrading they play a key role in regional and national innovation systems. Yet there is great variety in the form and mission of such RTOs, especially in terms of the degree of regional alignment, and whilst some regions are ...

  6. Creating the Future: Research and Technology

    Science.gov (United States)

    1998-01-01

    With the many different technical talents, Marshall Space Flight Center (MSFC) continues to be an important force behind many scientific breakthroughs. The MSFC's annual report reviews the technology developments, research in space and microgravity sciences, studies in space system concepts, and technology transfer. The technology development programs include development in: (1) space propulsion and fluid management, (2) structures and dynamics, (3) materials and processes and (4) avionics and optics.

  7. Oral History as Educational Technology Research

    Science.gov (United States)

    Butler, Rebecca P.

    2008-01-01

    Oral history is a significant type of historical research. Its use in retaining records of the early days of educational technology provides another way to look at the history of this field. The remembrances of its founders inform everyone today of, not only of what went on before, but also of how current and future technologies evolve. There are…

  8. Science, Technology and Arts Research Journal

    African Journals Online (AJOL)

    Science, Technology and Arts Research Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 1, No 1 (2012) >. Log in or Register to get access to full text downloads.

  9. Information Technology Research & Development Foresight in Iran.

    Directory of Open Access Journals (Sweden)

    Mansoor Sheydaee

    2017-09-01

    The results of the Delphi process was reported in national level, including Delphi panel members demography, public questions and specialized questions for each of the technologies. Finally the research provides some recommendations for decision makers.

  10. Emerging Technologies for Gut Microbiome Research

    Science.gov (United States)

    Arnold, Jason W.; Roach, Jeffrey; Azcarate-Peril, M. Andrea

    2016-01-01

    Understanding the importance of the gut microbiome on modulation of host health has become a subject of great interest for researchers across disciplines. As an intrinsically multidisciplinary field, microbiome research has been able to reap the benefits of technological advancements in systems and synthetic biology, biomaterials engineering, and traditional microbiology. Gut microbiome research has been revolutionized by high-throughput sequencing technology, permitting compositional and functional analyses that were previously an unrealistic undertaking. Emerging technologies including engineered organoids derived from human stem cells, high-throughput culturing, and microfluidics assays allowing for the introduction of novel approaches will improve the efficiency and quality of microbiome research. Here, we will discuss emerging technologies and their potential impact on gut microbiome studies. PMID:27426971

  11. Science, Technology and Arts Research Journal

    African Journals Online (AJOL)

    Science, Technology and Arts Research Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 1, No 2 (2012) >. Log in or Register to get access to full text downloads.

  12. Nonthermal processing technologies to improve the safety of raw meat and poultry products and ready-to-eat foods

    Science.gov (United States)

    Newly emerging nonthermal and advanced thermal processing technologies are now being adopted by the food processing industry for the purpose of providing safe and high quality food products to consumers. Scientists and engineers at USDA’s Eastern Regional Research Center in Wyndmoor, PA are activel...

  13. Innovative Agro-food Technologies Implementation through Instructional Communication Mechanisms

    Directory of Open Access Journals (Sweden)

    Gianita BLEOJU

    2012-04-01

    Full Text Available The current research represents the valorization of the dissemination the design framework of an interdisciplinary area of research, validated through SPAS European FP6 project and a national BIOSIG- PN2 and has as objective to channel communication on target market, through personalized solution of instructional communication mechanisms. The main objective of the national research grant being the implementation of innovative biotechnology on agro-food market, in order to improve the fish diet’s benefits, the prospects must be provided with valuable explicit information. This paper is about the commitment to embedding the actual consumer experience from PN2 fish market research and agro-food agents’ capitalization knowledge behavior from SPAS virtual platform, through designing the adequate communication framework, in order to support and accelerate the implementation of the innovation biotechnology, through improving the target market experience. The projected solution is mainly concerning to offer adequate solutions to insure against current consumers fragilities, but we also underline the vulnerabilities of the whole agro food value chain, in terms of communication strategy, which is lacking of adequate common interest coordination. The current research solution is regarding the rising awareness about the translation from consumer preferences to perceived detriment by integrating previous validated solution of agro food market analysis.

  14. Perspectives for food research and European collaboration in the European Research Area and the new Framework Programme.

    Science.gov (United States)

    Breslin, L

    2001-08-01

    Since 1987, successive framework programmes have contributed to strengthen European food research through the establishment of networks between research institutions, universities and companies from various European countries. In the FAIR programme (1994-1998), 118 research projects comprising nearly 1,000 participants from the European Union and Associated States have been supported in the food area with a European funding of about [symbol: see text] 108 million. Within the Quality of Life and Management of Living Resources programme (1998-2002), food research is mostly supported within the key action 'food, nutrition and health' with a budget of [symbol: see text] 290 million. After the first four deadlines, 735 eligible research proposals have already been received. Further to their evaluation by a panel of independent experts, 108 proposals have been funded or selected for funding representing a total contribution of about [symbol: see text] 168 million. Among those, several clusters of projects are now running on important topics such as probiotics, coeliac diseases, mycotoxins, GMO, safety and food for the elderly. In addition, technology stimulation measures are largely benefiting SMEs to foster their innovation potential. In January 2000, the European Commission adopted a Communication entitled "Towards the European Research Area (ERA)" with the objective to contribute to developing better framework conditions for research in Europe. On 21 February 2001, the Commission adopted proposals to be submitted to the European Parliament and Council for the next framework programme for research and innovation (2002-2006). The new framework programme that is becoming one of the financial instruments of the ERA aims at catalysing the integration of European research by: strengthening of links between the Community research effort and national and regional research policies; concentrating on a limited number of priority fields or research to which activities at the

  15. Research and development and management of technology

    International Nuclear Information System (INIS)

    Kim, Yeong Gil

    1989-04-01

    This book mentions current state of affairs on research and development and prospect : activity of business, field like information and materials, energy and resource, public welfare, general industry technology. It introduces policy on promotion of research and development such as propel of special research and development business, propel strategy for 10 priority tasks, reinforcement of basic research, promotion of information industry and propel for technical development of business.

  16. Nanoscale Science, Engineering and Technology Research Directions

    Energy Technology Data Exchange (ETDEWEB)

    Lowndes, D. H.; Alivisatos, A. P.; Alper, M.; Averback, R. S.; Jacob Barhen, J.; Eastman, J. A.; Imre, D.; Lowndes, D. H.; McNulty, I.; Michalske, T. A.; Ho, K-M; Nozik, A. J.; Russell, T. P.; Valentin, R. A.; Welch, D. O.; Barhen, J.; Agnew, S. R.; Bellon, P.; Blair, J.; Boatner, L. A.; Braiman, Y.; Budai, J. D.; Crabtree, G. W.; Feldman, L. C.; Flynn, C. P.; Geohegan, D. B.; George, E. P.; Greenbaum, E.; Grigoropoulos, C.; Haynes, T. E.; Heberlein, J.; Hichman, J.; Holland, O. W.; Honda, S.; Horton, J. A.; Hu, M. Z.-C.; Jesson, D. E.; Joy, D. C.; Krauss, A.; Kwok, W.-K.; Larson, B. C.; Larson, D. J.; Likharev, K.; Liu, C. T.; Majumdar, A.; Maziasz, P. J.; Meldrum, A.; Miller, J. C.; Modine, F. A.; Pennycook, S. J.; Pharr, G. M.; Phillpot, S.; Price, D. L.; Protopopescu, V.; Poker, D. B.; Pui, D.; Ramsey, J. M.; Rao, N.; Reichl, L.; Roberto, J.; Saboungi, M-L; Simpson, M.; Strieffer, S.; Thundat, T.; Wambsganss, M.; Wendleken, J.; White, C. W.; Wilemski, G.; Withrow, S. P.; Wolf, D.; Zhu, J. H.; Zuhr, R. A.; Zunger, A.; Lowe, S.

    1999-01-01

    This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry.

  17. Excerpts from the discussion [Scientific afternoon: Nuclear science and technology in food and agriculture

    International Nuclear Information System (INIS)

    1976-01-01

    This article presents excerpts from the discussion on nuclear science and technology in food and agriculture. The discussions covered all aspects of nuclear applications in food and agriculture, namely, food preservation cultivation, animal husbandry and pest control

  18. Review of scientific Research results in identification of plant raw materials in food products

    OpenAIRE

    GOLUBTSOVA YU. V.

    2016-01-01

    Currently, the science-based capabilities have been generated to develop and test various identification methods of food products and reveal adulteration using advanced technique and processes. This article reviews researches and developments to identify the plant raw materials in food products based on morphological, anatomic, physical and chemical test methods and the latest DNA-technologies. Review of physical, chemical, anatomic and morphological test methods to identify raw materials bot...

  19. Social technologies and socialization of research

    Directory of Open Access Journals (Sweden)

    Jos Leijten

    2009-09-01

    Full Text Available Whether we like it or not, and how many difficulties this may pose, scientific research and technology are becoming the “property” of everybody and increasingly will become subject of public guidance and political decision making. Socialization happens because what people think, want and do has become central to the development of science and technology. Socialization of research is simply happening because it is the development characteristic of a society in which knowledge is becoming the main driving force. And just like in agricultural or industrial societies in the past it leads to (re-invent the institutions and mechanisms which allow the knowledge society to function properly.This note will further explore the developments contributing to the socialization of research and their impact on research and research institutes. It will focus more on technologies than on science per se, because applications and usage will become the main drivers.

  20. Mapping Translation Technology Research in Translation Studies

    DEFF Research Database (Denmark)

    Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

    2017-01-01

    section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation......Due to the growing uptake of translation technology in the language industry and its documented impact on the translation profession, translation students and scholars need in-depth and empirically founded knowledge of the nature and influences of translation technology (e.g. Christensen....../Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...

  1. Promotion of organic food in Serbia: Implications from organic food consumers' profile research

    Directory of Open Access Journals (Sweden)

    Đokić Ines

    2014-01-01

    Full Text Available The article presents the results of the research of organic food frequency of consumption (in general, conducted in Serbia in June 2013 (n=300. Respondents were classified into low-frequent organic food consumers' segment and high-frequent organic food consumers' segment. Socio-demographic characteristics of respondents were also investigated, thus allowing comparing two segments regarding consumers' profile. The organic food high-frequent consumers' segment consisted of more women, more educated people, more married respondents and respondents living with children and having larger households, as well as of consumers with higher self-assessed household income in comparison to organic food low-frequent consumers' segment. Having in mind the results of the research and the level of domestic market development when choosing which segment to target, as well as starting from understanding promotion in the context of integrated marketing communication and the means-end approach to consumer behavior, recommendations for organic food promotion were given.

  2. Mapping Translation Technology Research in Translation Studies

    DEFF Research Database (Denmark)

    Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

    2017-01-01

    /Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...... section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation...... technology research as a subdiscipline of TS, and we define and discuss some basic concepts and models of the field that we use in the rest of the paper. Based on a small-scale study of papers published in TS journals between 2006 and 2016, Section 3 attempts to map relevant developments of translation...

  3. A snapshot of research in learning technology

    Directory of Open Access Journals (Sweden)

    Rhona Sharpe

    2010-12-01

    Full Text Available The papers in this issue present a convenient snapshot of current research in learning technology, both in their coverage of the issues that concern us and the methods that are being used to investigate them. This issue shows that e-learning researchers are interested in: what technologies are available and explorations of their potential (Nie et al. explore the role of podcasting, how to design technology-mediated learning activities in ways which support specific learning outcomes (Simpson evaluates the role of ‘book raps' in supporting critical thinking, the identification of critical success factors in implementations (Cochrane's observation of three mobile learning projects and how such e-learning initiatives can be sustained within an institutional context (Gunn's examination of the challenges of embedding ‘grass roots' initiatives. Finally e-learning research is concerned with investigating the impact of emerging technologies on education – in this case Traxler's discussion of mobile, largely student-owned, devices. Together these five papers demonstrate the scope of research in learning technology and it is with this in mind that we will soon be referring to this journal by its subtitle: Research in Learning Technology.

  4. Research on food security makes a difference for African women ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    17 avr. 2014 ... There is ample evidence that addressing gender inequalities and empowering women are vital to meeting the challenges of improving food and nutrition security, and enabling poor rural people to overcome poverty. A central objective of the Canadian International Food Security Research Fund (CIFSRF) is ...

  5. Research on food security makes a difference for African women ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-05-05

    May 5, 2016 ... There is ample evidence that addressing gender inequalities and empowering women are vital to meeting the challenges of improving food and nutrition security, and enabling poor rural people to overcome poverty. A central objective of the Canadian International Food Security Research Fund (CIFSRF) is ...

  6. Environmental and health benefits of adopting food irradiation technology

    International Nuclear Information System (INIS)

    Sharma, Arun K.

    2013-01-01

    World is largely dependent on low temperature and fumigation methods for conserving its food and managing supply chains from farm to fork. Maintaining low temperature is energy intensive, and therefore, an expensive exercise, with some impact on environment. On the other hand, fumigation is a cheap method, but hugely detrimental to the environment and human health. Applications of food irradiation technology are well known. However, the technology is yet to be fully exploited commercially. This is probably because of insufficient policy backing at the global level. An analysis of the applications of food irradiation reveals that the technology can help reduce process related impact on the environment, and mitigate consumption related risks to human health. Despite the planned phase out by 2015, fumigation is still a common practice in a large part of the world, including India. Huge buffer stocks of grain are fumigated at regular intervals round the year to keep them free from insect infestation. Besides, for managing regular stocks and supply chains, both for domestic consumption as well as in international trade, fumigants like methyl bromide, ethylene dibromide, ethylene oxide, and phosphides are regularly used for disinfestation and microbial decontamination of cereals, pulses, and their products, and commodities like spices and dehydrated vegetables. This whopping use of fumigants can be drastically reduced by adopting food irradiation technology as a safe and dependable alternative. For fresh fruits and vegetables, radiation technology can delay physiological changes like ripening, senescence, and inhibit sprouting. Besides achieving the technological objective, radiation treatment allows storage of many of these commodities at a temperature about ten degree higher than the normal recommended. Many of the commodities like meat and seafood, and their products, that are normally stored frozen, can be stored under chilled storage after radiation processing

  7. Technological Affordances for the Music Education Researcher

    Science.gov (United States)

    Bauer, William I.

    2016-01-01

    The purpose of this study was to examine music education researchers' perceptions of the importance of selected technologies to scholarly inquiry. Participants (N = 460), individuals who had published articles during a 5-year period between 2008 and 2012 in six prominent journals that disseminate music education research, were invited to complete…

  8. Technology management for the installation of a food irradiator in the Ribeira Valley

    International Nuclear Information System (INIS)

    Ghobril, Carlos Nabil

    2008-01-01

    This thesis presents a research focused on technology management applied to technical and economic viability study for the installation of a multi propose irradiator in Vale do Ribeira. First, the work presents the regional characteristics that shows Vale do Ribeira as the less economically developed region of Sao Paulo state. On the other side, it shows the emergence of irradiation techniques applied to the food industry, with accepted and recommended results by international authorities. Technology management, from the conceptual basis here presented, links regional environment reality to available technical knowledge, in search of regional development. The methodology was composed by the use of bibliographical, qualitative and quantitative research, and the analysis was supported by the use of statistical techniques and economic viability analysis. The present research concludes that there is technical and economic viability of the venture here analyzed, although it should be recommended more studies about banana irradiation and about Brazilian consumer acceptance to irradiated food products. (author)

  9. Research on NGN network control technology

    Science.gov (United States)

    Li, WenYao; Zhou, Fang; Wu, JianXue; Li, ZhiGuang

    2004-04-01

    Nowadays NGN (Next Generation Network) is the hotspot for discussion and research in IT section. The NGN core technology is the network control technology. The key goal of NGN is to realize the network convergence and evolution. Referring to overlay network model core on Softswitch technology, circuit switch network and IP network convergence realized. Referring to the optical transmission network core on ASTN/ASON, service layer (i.e. IP layer) and optical transmission convergence realized. Together with the distributing feature of NGN network control technology, on NGN platform, overview of combining Softswitch and ASTN/ASON control technology, the solution whether IP should be the NGN core carrier platform attracts general attention, and this is also a QoS problem on NGN end to end. This solution produces the significant practical meaning on equipment development, network deployment, network design and optimization, especially on realizing present network smooth evolving to the NGN. This is why this paper puts forward the research topic on the NGN network control technology. This paper introduces basics on NGN network control technology, then proposes NGN network control reference model, at the same time describes a realizable network structure of NGN. Based on above, from the view of function realization, NGN network control technology is discussed and its work mechanism is analyzed.

  10. Status and future of food irradiation research project

    International Nuclear Information System (INIS)

    Fujimaki, Masao

    1982-01-01

    The first part of the report presented the results of wholesomeness evaluation of the irradiated potato, onion, rice and wheat by Organization of the National Research Programme on Food Irradiation which conducts food irradiation in Japan. The second part dealt with the wholesomeness evaluation of food irradiation by the joint specialist conference of FAO, IAEA and WHO. It was concluded that irradiation of a maximum mean of 10 KGy or less was unconditionally permissible for every food item, not requiring a toxicity test. However, the relationship between irradiation techniques and economic feasibility, wholesomeness of high dose irradiation, the human effect of use of irradiated food item, food chemistry and nutritional problems remain to be examined. (Chibe, N.)

  11. FY08 Engineering Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; McNichols, D

    2009-02-24

    This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2008. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow.' Engineering's mission is carried out through basic research and technology development. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. Our technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice.' As we pursue this two-pronged approach, an enormous range of technological capabilities result. This report combines our work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.

  12. Research Awards: Agriculture and Food Security program Deadline ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Jean-Claude Dumais

    2012-09-12

    Sep 12, 2012 ... HEAD OFFICE / SIÈGE : 150 Kent Street / 150, rue Kent PO Box ... to pursue their research goals in a dynamic team environment in ... You should have an interest in agriculture, food security, nutrition, rural livelihoods, and.

  13. Improving food security and nutrition through research | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-10-06

    Oct 6, 2016 ... In Canada, the 2012 federal budget highlighted CIFSRF's success, noting how the ... New animal vaccines could keep more African farmers in business ... Research on food security makes a difference for African women.

  14. World Food Day 2015 | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-05-25

    May 25, 2016 ... World Food Day 2015 ... Canadian Lorne Babiuk, a global leader in vaccine research, Killam Prize and Gairdner Wightman Award laureate, ... Sign up now for IDRC news and views sent directly to your inbox each month.

  15. Food, nutrition & behaviour : research for healthy eating, healthy living

    NARCIS (Netherlands)

    Beesems, J.; Domingus, S.; Nieuwenhuizen, van de J.; Veer, van 't P.; Zondervan, C.

    2011-01-01

    This brochure illustrates this range of research activities in the domain of food and nutrition, lifestyle and health. It does so by providing examples of collaboration of Wageningen UR with partners in the public and private sector.

  16. Research Award: Food, Environment, and Health 2019 | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2018-09-05

    Deadline: September 5, 2018 Please note that all applications must be submitted ... and mentorship allow award holders to pursue their research goals and work in ... and/or individual behaviour change;; projects solely focused on food safety.

  17. Research helps improve food security and nutrition

    International Development Research Centre (IDRC) Digital Library (Canada)

    Corey Piccioni

    agricultural productivity, improving nutrition, and raising incomes of men and women smallholder farmers. IDRC accomplishes this through joint partnerships with Global. Affairs Canada and the Australian Centre for International. Agricultural Research. Our researchers use a variety of approaches to: • Increase productivity of ...

  18. Canadian International Food Security Research Fund (CIFSRF)

    International Development Research Centre (IDRC) Digital Library (Canada)

    The research team will test innovative mechanisms such as elec- tronic vouchers to target vulnerable groups on a large scale. E-voucher discounts delivered by mobile phone to 65,000 lactat- ing mothers will provide a temporary price incentive to help build a market for the product. The scheme will also enable researchers.

  19. Innovative Agro-Food Technologies to Minimize Consumer Detriment

    Directory of Open Access Journals (Sweden)

    Gianita BLEOJU

    2011-11-01

    Full Text Available The paper intends to offer a solution for accelerating the implementation of new biotechnologies designated to prevent consumer detriment. Designing an intervention mechanism along current inefficient chain of consumer feed- back information is a must. Upon different interconnected knowledge area of expertise, both on consumer detriment and biotechnologies for human food safety and security, we propose our approach relying upon relevant experiences on innovational biotechnologies as response to consumer fragilities data from recent validated agro food market research. We target the rising awareness regarding the translation from consumer preferences, to perceived detriment.

  20. Food reward system: current perspectives and future research needs.

    Science.gov (United States)

    Alonso-Alonso, Miguel; Woods, Stephen C; Pelchat, Marcia; Grigson, Patricia Sue; Stice, Eric; Farooqi, Sadaf; Khoo, Chor San; Mattes, Richard D; Beauchamp, Gary K

    2015-05-01

    This article reviews current research and cross-disciplinary perspectives on the neuroscience of food reward in animals and humans, examines the scientific hypothesis of food addiction, discusses methodological and terminology challenges, and identifies knowledge gaps and future research needs. Topics addressed herein include the role of reward and hedonic aspects in the regulation of food intake, neuroanatomy and neurobiology of the reward system in animals and humans, responsivity of the brain reward system to palatable foods and drugs, translation of craving versus addiction, and cognitive control of food reward. The content is based on a workshop held in 2013 by the North American Branch of the International Life Sciences Institute. © The Author(s) 2015. Published by Oxford University Press on behalf of the International Life Sciences Institute.

  1. Office of Industrial Technologies research in progress

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  2. Environmental application of cesium-137 irradiation technology: sludges and foods

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1983-01-01

    Several activities have been undertaken to investigate and implement the use of the military byproduct cesium-137 in ways which benefit mankind. Gamma radiation from cesium-137 has been shown to be effective in reducing pathogens in sewage sludge to levels where reuse of the material in public areas meets current regulatory criteria for protection of public health. Food irradiation at doses of 10 kGy or less have been found by international expert committees to be wholesome and safe for human consumption. Cesium-137 can be used as a means of enhancing particular properties of various food commodities by means of sterilization, insect disinfestation, delayed senescence and ripening, and sprout inhibition. This paper discusses the U.S. Department of Energy Beneficial Uses Program research and engineering history, as well as current activities and future plans, relating to both sewage sludge and food irradiation. (author)

  3. Environmental application of cesium-137 irradiation technology: Sludges and foods

    Science.gov (United States)

    Sivinski, Jacek S.

    Several activities have been undertaken to investigate and implement the use of the military byproduct cesium-137 in ways which benefit mankind. Gamma radiation from cesium-137 has been shown to be effective in reducing pathogens in sewage sludge to levels where reuse of the material in public areas meets current regulatory criteria for protection of public health. Food irradiation at doses of 10 kGy or less have been found by international expert committees to be wholesome and safe for human consumption. Cesium-137 can be used as a means of enhancing particular properties of various food commodities by means of sterilization, insect disinfestation, delayed senescence and ripening, and sprout inhibition. This paper discusses the U.S. Department of Energy Beneficial Uses Program research and engineering history, as well as current activities and future plans, relating to both sewage sludge and food irradiation.

  4. Research Award: Agriculture and Food Security Program

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    social) without adverse consequences to societies and the environment. ... research will place particular attention on the interactions of public sector ... Applicants should clearly outline their qualifications for this position, and explain how this ...

  5. Food studies: an introduction to research methods

    National Research Council Canada - National Science Library

    Miller, Jeff; Deutsch, Jonathan

    2009-01-01

    .... Designed for the classroom as well as for the independent scholar, the book details the predominant research methods in the field, provides a series of interactive questions and templates to help...

  6. Contributions of mobile technologies to addiction research.

    Science.gov (United States)

    Swendsen, Joel

    2016-06-01

    Mobile technologies are revolutionizing the field of mental health, and particular progress has been made in their application to addiction research and treatment. The use of smartphones and other mobile devices has been shown to be feasible with individuals addicted to any of a wide range of substances, with few biases being observed concerning the repeated monitoring of daily life experiences, craving, or substance use. From a methodological point of view, the use of mobile technologies overcomes longstanding limitations of traditional clinical research protocols, including the more accurate assessment of temporal relationships among variables, as well as the reduction in both contextual constraints and discipline-specific methodological isolation. The present article presents a conceptual review of these advances while using illustrations of research applications that are capable of overcoming specific methodological barriers. Finally, a brief review of both the benefits and risks of mobile technology use for the treatment of patients will be addressed.

  7. Electron beam processing in food industry - technology and costs

    International Nuclear Information System (INIS)

    Gallien, Cl.L.; Ferradini, C.; Paquin, J.; Sadat, T.

    1985-01-01

    After nearly 40 years of research and thousands of positive experimentations, the fact that ionising radiations could be used for food preservation has been taken into account by the joint Expert Committee of the UN agencies, FAO, WHO and IAEA, who recommended this type of treatment in 1981 allowing doses up to 10 kGy. The market for irradiated food is actually small, but it could develop rapidly. National authorities who establish the regulations are becoming very active: so, in 1984, the US FDA has issued a proposed rule to regulate the commercial applications of food irradiation. It is timely to propose a MODEL that should really convince administration, food industry executives and consumers organizations that food irradiation is more than academic speculation: an industrial processing and an economical imperative. To this aim, we have defined an integrated model assembling (a) a sample product; (b) the optimal treatment conditions for this product, including a reliable dosimetry control system; and (c) a most efficient and competitive treatment unit that can suit a wide range of industrial needs. (author)

  8. Overview of the dairy and food processing research conducted at the Dairy and Functional Foods Research Unit, ERRC, and research to develop sustainable food processes

    Science.gov (United States)

    The DFFRU is dedicated to solving critical problems in the utilization of milk and specialty crop byproducts by developing high-quality, value-added functional foods and consumer products. The presentation will give an overview of the research projects that will benefit human health and well-being. ...

  9. Progress report for 1975-1977 of the Biochemistry and Food Technology Division

    International Nuclear Information System (INIS)

    1978-01-01

    Research and development work carried out during the period 1975-77 in the Biochemistry and Food Technology Division of the Bhabha Atomic Research Centre, is reported. In addition to the studies on macromolecular aspects of structure and function of chemical components e.g. proteins and enzymes of living systems and food microbiology, major studies relate to: (1) safe storage of wheat irradiated for disinfestation, (2) compositional changes in wheat exposed to high dose of radiation, (3) sprout inhibition of irradiated potatoes during storage under tropical conditions, (4) induction of phenylalanine ammonium lyase in irradiated potatoes, (5) preservation of mangoes and bananas by heat-radiation combination, (6) extension of shelf-life of fish by radurization, (7) wholesomeness of irradiated fish and (8) genetic toxicological evaluation of irradiated foods. (M.G.B.)

  10. Research on Technology and Physics Education

    Science.gov (United States)

    Bonham, Scott

    2010-10-01

    From Facebook to smart phones, technology is an integral part of our student's lives. For better or for worse, technology has become nearly inescapable in the classroom, enhancing instruction, distracting students, or simply complicating life. As good teachers we want to harness the power we have available to impact our students, but it is getting harder as the pace of technological change accelerates. How can we make good choices in which technologies to invest time and resources in to use effectively? Do some technologies make more of a difference in student learning? In this talk we will look at research studies looking at technology use in the physics classroom---both my work and that of others---and their impact on student learning. Examples will include computers in the laboratory, web-based homework, and different forms of electronic communication. From these examples, I will draw some general principles for effective educational technology and physics education. Technology is simply a tool; the key is how we use those tools to help our students develop their abilities and understanding.

  11. Risk assessment research and technology assessment

    International Nuclear Information System (INIS)

    Albach, H.; Schade, D.; Sinn, H.

    1991-01-01

    The concepts and approaches for technology assessment, the targets and scientific principles, as well as recognizable deficits and recommendations concerning purposeful strategies for the promotion of this research field require a dialog between those concerned. Conception, deficits, and the necessary measures for risk assessment research and technology assessment were discussed as well as ethical aspects. The problematic nature of using organisms altered through genetic engineering in the open land, traffic and transport, site restoration, nuclear energy, and isotope applications were subjects particularly dealt with. (DG) [de

  12. Space Photovoltaic Research and Technology 1995

    Science.gov (United States)

    Landis, Geoffrey (Compiler)

    1995-01-01

    The Fourteenth Space Photovoltaic Research and Technology conference was held at the NASA Lewis Research Center from October 24-26, 1995. The abstracts presented in this volume report substantial progress in a variety of areas in space photovoltaics. Technical and review papers were presented in many areas, including high efficiency GaAs and InP solar cells, GaAs/Ge cells as commercial items, high efficiency multiple bandgap cells, solar cell and array technology, heteroepitaxial cells, thermophotovoltaic energy conversion, and space radiation effects. Space flight data on a variety of cells were also presented.

  13. A comprehensive review on food waste anaerobic digestion: Research updates and tendencies.

    Science.gov (United States)

    Ren, Yuanyuan; Yu, Miao; Wu, Chuanfu; Wang, Qunhui; Gao, Ming; Huang, Qiqi; Liu, Yu

    2018-01-01

    Anaerobic digestion has been practically applied in agricultural and industrial waste treatment and recognized as an economical-effective way for food waste disposal. This paper presented an overview on the researches about anaerobic digestion of food waste. Technologies (e.g., pretreatment, co-digestion, inhibition and mitigation, anaerobic digestion systems, etc.) were introduced and evaluated on the basis of bibliometric analysis. Results indicated that ethanol and aerobic prefermentation were novel approaches to enhance substrates hydrolysis and methane yield. With the promotion of resource recovery, more attention should be paid to biorefinery technologies which can produce more useful products toward zero emissions. Furthermore, a technological route for food waste conversion based on anaerobic digestion was proposed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Armstrong Flight Research Center Research Technology and Engineering Report 2015

    Science.gov (United States)

    Voracek, David F.

    2016-01-01

    I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

  15. Research on the Sensory Design and Evaluation System for Food Shape and Color

    OpenAIRE

    Zhuo Yang

    2015-01-01

    Food sensory analysis technology is an important branch of Food Science, it is significant in new products development and innovation in food industry. In this study, food sensory analysis and evaluation technologies were studied based on the development and characters of food science. The results showed that sensory analysis could not only help in grasping characters of different food products, but also provide physicochemical and practice basis for food production management and process con...

  16. Intellectual assets management and transfer in food science sector in Indian research and development organizations.

    Science.gov (United States)

    Singh, Vikram; Chakraborty, Kajal

    2016-05-01

    In recent years, the food science sector has gained importance since the society is focusing on high-quality and safety foods. With a specific end goal to meet this societal need, the research and development organizations in India have adopted innovative technical and research processes, which gave more accentuation on intellectual assessment in food processing industry. The global Intellectual Property regime in food science sector had witnessed an increment in the number of patents filed and granted during 2006-2010. Ever since there has been a gradual increase in the number of patents applied mainly in food processing industries by research organizations related to food sciences, for example, those working under the aegis of ICAR and CSIR in India. In this study, a review has been done on the intellectual assets generated by ICAR and other national research organizations in India, in the food science sector. Emphasis has been given on the global relevance of these assets, modes of IP protection and technology transfer mechanisms followed by different public and private organizations.

  17. Testing the Abbreviated Food Technology Neophobia Scale and its relation to satisfaction with food-related life in university students.

    Science.gov (United States)

    Schnettler, Berta; Grunert, Klaus G; Miranda-Zapata, Edgardo; Orellana, Ligia; Sepúlveda, José; Lobos, Germán; Hueche, Clementina; Höger, Yesli

    2017-06-01

    The aims of this study were to test the relationships between food neophobia, satisfaction with food-related life and food technology neophobia, distinguishing consumer segments according to these variables and characterizing them according to willingness to purchase food produced with novel technologies. A survey was conducted with 372 university students (mean aged=20.4years, SD=2.4). The questionnaire included the Abbreviated version of the Food Technology Neophobia Scale (AFTNS), Satisfaction with Life Scale (SWLS), and a 6-item version of the Food Neophobia Scale (FNS). Using confirmatory factor analysis, it was confirmed that SWFL correlated inversely with FNS, whereas FNS correlated inversely with AFTNS. No relationship was found between SWFL and AFTNS. Two main segments were identified using cluster analysis; these segments differed according to gender and family size. Group 1 (57.8%) possessed higher AFTNS and FNS scores than Group 2 (28.5%). However, these groups did not differ in their SWFL scores. Group 1 was less willing to purchase foods produced with new technologies than Group 2. The AFTNS and the 6-item version of the FNS are suitable instruments to measure acceptance of foods produced using new technologies in South American developing countries. The AFTNS constitutes a parsimonious alternative for the international study of food technology neophobia. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. 78 FR 40098 - Emerging Technology and Research Advisory Committee;

    Science.gov (United States)

    2013-07-03

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Assistant Secretary for Export Administration on emerging technology and research activities, including...

  19. Enhancement of efficiency of storage and processing of food raw materials using radiation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Gracheva, A. Yu.; Zav’yalov, M. A.; Ilyukhina, N. V.; Kukhto, V. A.; Tarasyuk, V. T.; Filippovich, V. P. [All-Russia Research Institute of Preservation Technology (Russian Federation); Egorkin, A. V.; Chasovskikh, A. V. [Research Institute of Technical Physics and Automation (Russian Federation); Pavlov, Yu. S., E-mail: rad05@bk.ru [Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences (Russian Federation); Prokopenko, A. V., E-mail: pav14@mail.ru [National Research Nuclear University (Moscow Engineering Physics Institute) (Russian Federation); Strokova, N. E. [Moscow State University (Russian Federation); Artem’ev, S. A. [Russian Research Institute of Baking Industry (Russian Federation); Polyakova, S. P. [Russian Research Institute of Confectionery Industry (Russian Federation)

    2016-12-15

    The work is dedicated to improvement of efficiency of storage and processing of food raw materials using radiation technologies. International practice of radiation processing of food raw materials is presented and an increase in the consumption of irradiated food products is shown. The prospects of using radiation technologies for the processing of food products in Russia are discussed. The results of studies of radiation effects on various food products and packaging film by γ radiation and accelerated electrons are presented.

  20. Enhancement of efficiency of storage and processing of food raw materials using radiation technologies

    International Nuclear Information System (INIS)

    Gracheva, A. Yu.; Zav’yalov, M. A.; Ilyukhina, N. V.; Kukhto, V. A.; Tarasyuk, V. T.; Filippovich, V. P.; Egorkin, A. V.; Chasovskikh, A. V.; Pavlov, Yu. S.; Prokopenko, A. V.; Strokova, N. E.; Artem’ev, S. A.; Polyakova, S. P.

    2016-01-01

    The work is dedicated to improvement of efficiency of storage and processing of food raw materials using radiation technologies. International practice of radiation processing of food raw materials is presented and an increase in the consumption of irradiated food products is shown. The prospects of using radiation technologies for the processing of food products in Russia are discussed. The results of studies of radiation effects on various food products and packaging film by γ radiation and accelerated electrons are presented.

  1. [Food industry funding and epidemiologic research in public health nutrition].

    Science.gov (United States)

    Navarrete-Muñoz, Eva María; Tardón, Adonina; Romaguera, Dora; Martínez-González, Miguel Ángel; Vioque, Jesús

    The interests of the food industry to fund nutrition and health research are not limited to promoting scientific advances. Recently, several systematic reviews conducted about the effect of sugar-sweetened beverages and health outcomes have shown some biased conclusions in studies that acknowledge industry sponsorship. In this context, the Nutrition Working Group of the Spanish Epidemiology Society presented a scientific session entitled Food industry and epidemiologic research at its annual meeting. In a round table, four experts in nutrition research presented their points of view about whether the food industry should fund nutrition-related research and the related potential conflicts of interest of the food industry. All the experts agreed not only on defending independence in nutritional epidemiology regarding the design, interpretation and conclusion of their studies but also on the crucial need for guaranteed scientific rigor, scientific quality of the results and measures to protect studies against potential biases related to the conflicts of interest of funding by the food industry. Drs Pérez-Farinós and Romaguera believe that the most effective way to prevent conflicts of interest would be not to allow the food industry to fund nutrition research; Drs Marcos and Martínez-González suggested the need to establish mechanisms and strategies to prevent the potential influences of the food industry in selecting researchers or institutional sponsorship and in the analysis and results of the studies, to ensure maximum independence for researchers, as well as their professional ethics. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  2. Blockchain technology for improving clinical research quality

    OpenAIRE

    Benchoufi, Mehdi; Ravaud, Philippe

    2017-01-01

    Reproducibility, data sharing, personal data privacy concerns and patient enrolment in clinical trials are huge medical challenges for contemporary clinical research. A new technology, Blockchain, may be a key to addressing these challenges and should draw the attention of the whole clinical research community. Blockchain brings the Internet to its definitive decentralisation goal. The core principle of Blockchain is that any service relying on trusted third parties can be built in a transpar...

  3. Health effects of coal technologies: research needs

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    In this 1977 Environmental Message, President Carter directed the establishment of a joint program to identify the health and environmental problems associated with advanced energy technologies and to review the adequacy of present research programs. In response to the President's directive, representatives of three agencies formed the Federal Interagency Committee on the Health and Environmental Effects of Energy Technologies. This report was prepared by the Health Effects Working Group on Coal Technologies for the Committee. In this report, the major health-related problems associated with conventional coal mining, storage, transportation, and combustion, and with chemical coal cleaning, in situ gasification, fluidized bed combustion, magnetohydrodynamic combustion, cocombustion of coal-oil mixtures, and cocombustion of coal with municipal solid waste are identified. The report also contains recommended research required to address the identified problems.

  4. Nigerian Journal of Technological Research: Submissions

    African Journals Online (AJOL)

    Contributions to The Nigerian Journal of Technological Research are invited on the ... to Pure and Applied Sciences, Engineering Sciences, Environmental Sciences, ... Acceptance of paper for publication in The Journal implies that it has not been ... In line with the development in ICT, electronic versions for all MS will be ...

  5. Landmine Detection Technology Research Programme at TNO

    NARCIS (Netherlands)

    Schleijpen, H.M.A.

    2003-01-01

    This presentation gives an overview of most of the activities on research and development in the technology area for landmine detection at TNO in the Netherlands. The projects cover the range from military applications to humanitarian demining. In the “conventional” detection systems area the

  6. Landmine detection technology research in the Netherlands

    NARCIS (Netherlands)

    Schleijpen, H.M.A.

    2003-01-01

    This paper gives an overview of the activities on research and development in the technology area for landmine detection in the Netherlands. The main players, their projects and the long term and short term project goals are presented. The projects cover the range from military applications to

  7. Educational Technology Research in a VUCA World

    Science.gov (United States)

    Reeves, Thomas C.; Reeves, Patricia M.

    2015-01-01

    The status of educational technology research in a VUCA world is examined. The acronym, VUCA, stands for "Volatility" (rapidly changing contexts and conditions), "Uncertainty" (information missing that is critical to problem solving), "Complexity" (multiple factors difficult to categorize or control), and…

  8. New energy technologies. Research program proposition

    International Nuclear Information System (INIS)

    2005-02-01

    This document presents the most promising program propositions of research and development and the public financing needed for their realization. The concerned technologies are: the hydrogen and the fuel cell PAN-H, the separation and the storage of the CO 2 , the photovoltaic solar electricity, the PREBAT program of the building energy recovery and the bio-energies. (A.L.B.)

  9. Landmine research: technology solutions looking for problems

    Science.gov (United States)

    Trevelyan, James P.

    2004-09-01

    The global landmine problem came to the attention of researchers in the mid 1990's and by 1997 several advanced and expensive sensor research programs had started. Yet, by the end of 2003, there is little sign of a major advance in the technology available to humanitarian demining programs. Given the motivation and dedication of researchers, public goodwill to support such programs, and substantial research resources devoted to the problem, it is worth asking why these programs do not seem to have had an impact on demining costs or casualty rates. Perhaps there are factors that have been overlooked. This paper reviews several research programs to gain a deeper understanding of the problem. A possible explanation is that researchers have accepted mistaken ideas on the nature of the landmine problems that need to be solved. The paper provides several examples where the realities of minefield conditions are quite different to what researchers have been led to believe. Another explanation may lie in the political and economic realities that drive the worldwide effort to eliminate landmines. Most of the resources devoted to landmine clearance programs come from humanitarian aid budgets: landmine affected countries often contribute only a small proportion because they have different priorities based on realistic risk-based assessment of needs and political views of local people. Some aid projects have been driven by the need to find a market for demining technologies rather than by user needs. Finally, there is a common misperception that costs in less developed countries are intrinsically low, reflecting low rates paid for almost all classes of skilled labour. When actual productivity is taken into account, real costs can be higher than industrialized countries. The costs of implementing technological solutions (even using simple technologies) are often significantly under-estimated. Some political decisions may have discouraged thorough investigation of cost

  10. Collation of Scientific Evidence on Consumer Acceptance of New Food Technologies: Three roads to consumer choice

    NARCIS (Netherlands)

    Fischer, A.R.H.; Trijp, van J.C.M.; Hofenk, D.J.B.; Ronteltap, A.; Tudoran, A.A.

    2012-01-01

    The current report investigates consumer acceptance of new food technologies by reviewing the scientific literature. The review is organised along three routes to consumer acceptance of new technologies: The consumer benefit road: the central road of technology features influencing experienced

  11. Research on the Food Security Condition and Food Supply Capacity of Egypt

    Directory of Open Access Journals (Sweden)

    Jian Deng

    2014-01-01

    Full Text Available Food security is chronically guaranteed in Egypt because of the food subsidy policy of the country. However, the increasing Egyptian population is straining the food supply. To study changes in Egyptian food security and future food supply capacity, we analysed the historical grain production, yield per unit, grain-cultivated area, and per capita grain possession of Egypt. The GM (1,1 model of the grey system was used to predict the future population. Thereafter, the result was combined with scenario analysis to forecast the grain possession and population carrying capacity of Egypt under different scenarios. Results show that the increasing population and limitations in cultivated land will strain Egyptian food security. Only in high cultivated areas and high grain yield scenarios before 2020, or in high cultivated areas and mid grain yield scenarios before 2015, can food supply be basically satisfied (assurance rate ≥ 80% under a standard of 400 kg per capita. Population carrying capacity in 2030 is between 51.45 and 89.35 million. Thus, we propose the use of advanced technologies in agriculture and the adjustment of plant structure and cropping systems to improve land utilization efficiency. Furthermore, urbanization and other uses of cultivated land should be strictly controlled to ensure the planting of grains.

  12. Research on the food security condition and food supply capacity of Egypt.

    Science.gov (United States)

    Deng, Jian; Xiang, Youzhen; Hao, Wenhui; Feng, Yongzhong; Yang, Gaihe; Ren, Guangxin; Han, Xinhui

    2014-01-01

    Food security is chronically guaranteed in Egypt because of the food subsidy policy of the country. However, the increasing Egyptian population is straining the food supply. To study changes in Egyptian food security and future food supply capacity, we analysed the historical grain production, yield per unit, grain-cultivated area, and per capita grain possession of Egypt. The GM (1,1) model of the grey system was used to predict the future population. Thereafter, the result was combined with scenario analysis to forecast the grain possession and population carrying capacity of Egypt under different scenarios. Results show that the increasing population and limitations in cultivated land will strain Egyptian food security. Only in high cultivated areas and high grain yield scenarios before 2020, or in high cultivated areas and mid grain yield scenarios before 2015, can food supply be basically satisfied (assurance rate ≥ 80%) under a standard of 400 kg per capita. Population carrying capacity in 2030 is between 51.45 and 89.35 million. Thus, we propose the use of advanced technologies in agriculture and the adjustment of plant structure and cropping systems to improve land utilization efficiency. Furthermore, urbanization and other uses of cultivated land should be strictly controlled to ensure the planting of grains.

  13. Mechanism of Food Ordering in A Restaurant Using Android Technology

    Science.gov (United States)

    Aulia, Rachmat; Zakir, Ahmad; Dafitri, Haida; Siregar, Dodi; Hasdiana

    2017-12-01

    A Restaurant is a gathering place for many people to taste the favorite foods are in there. The restaurant which visited many people sure will increase the attraction of them to visit it. Of course, the owner will get more benefit. However, what happens when a restaurant is famous still uses a service without technology, such as making orders using pens and paper, inspects the food stocks manually, and delivering orders to the kitchen using manpower, and more. Therefore, it designed a system that can accelerate the ordering and processing food in the restaurant. This system replaces the use of pen and paper with digital devices such as tablets/smartphones based on Android. Not only that, order data can be sent through a wireless network which connects tablets/smartphones with the kitchen's computer. It can be read by kitcheners and showed directly on the LCD screen. By the application is expected to reduce the level of error in the processing of the consumer's order.

  14. Results of wholesomeness test on basic plan of research and development of food irradiation (7 items)

    International Nuclear Information System (INIS)

    Furuya, Tsuyoshi

    1989-01-01

    Twenty years have elapsed since the general research on food irradiation was begun in Japan as the new technology for food preservation, and the research on the wholesomeness of irradiated foods has been carried out in wide range together with the research on irradiation effect, irradiation techniques and economical efficiency. The wholesomeness of irradiated foods includes chronic toxicity including carcinogenic property in the continuous intake for long period, the effect to reproduction function over many generations and the possibility of giving hereditary injury to cells, the nutritional adequacy required for the sustenance of life and the increase of health, and microbiological safety. In Japan, the research on food irradiation was designated as an atomic energy specific general research, and as the objects of research, potato and onion for the prevention of germination, rice and wheat for the protection from noxious insects, fish paste products, wienerwurst and mandarin orange for sterilization were selected. For the irradiation, Co-60 gamma ray was used except the case of mandarin orange using electron beam. The research on all 7 items was finished, and the irradiation of potato was permitted. (K.I.)

  15. Energy Technology Division research summary 2004

    International Nuclear Information System (INIS)

    Poeppel, R. B.; Shack, W. J.

    2004-01-01

    The Energy Technology (ET) Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy (DOE). The Division's capabilities are generally applied to technical issues associated with energy systems, biomedical engineering, transportation, and homeland security. Research related to the operational safety of commercial light water nuclear reactors (LWRs) for the US Nuclear Regulatory Commission (NRC) remains another significant area of interest for the Division. The pie chart below summarizes the ET sources of funding for FY 2004

  16. Towards Developing an Industry-Validated Food Technology Curriculum in Afghanistan

    Science.gov (United States)

    Ebner, Paul; McNamara, Kevin; Deering, Amanda; Oliver, Haley; Rahimi, Mirwais; Faisal, Hamid

    2017-01-01

    Afghanistan remains an agrarian country with most analyses holding food production and processing as key to recovery. To date, however, there are no public or private higher education departments focused on food technology. To bridge this gap, Herat University initiated a new academic department conferring BS degrees in food technology. Models for…

  17. Public acceptance, market development and commercialization of food irradiation technology in Bangladesh

    International Nuclear Information System (INIS)

    Karim, A.

    2001-01-01

    Current status of food irradiation technology in Bangladesh with respect to public acceptance, commercial application, trade development and present research and development activities are summarized in the paper. Irradiated food products are generally accepted by people. To further boost public opinion on the usefulness of the technology, two national seminars were successfully organized in 1995 and 1996 respectively with wide participation and media coverage. A number of non-traditional items such as beef casing, flour, turtle meat, macaroni, peat soil, etc. were irradiated and successfully marketed during the last 5 years. Bangladesh adopted a ''Specification for Authorisation of Irradiation by Groups/Classes of Foods'' in 1995 in line with the ICGFI Guidelines. The Bangladesh Standard is essentially similar to the Harmonised Regulations adopted for the RCA countries in April 1998. About 1300 metric tons of different food items were irradiated for commercial purposes at the Gammatech Irradiation Facility in Chittagong during the past 5 years. Present research activities in Bangladesh include irradiation disinfestations of nematodes in ginger and turmeric, and mites and thrips from cut flowers. Work on identification of fruit flies, mites and thrips by using sensitive protein markers is in progress. (author)

  18. Application of carbon isotope analyses in food technology

    International Nuclear Information System (INIS)

    Szanto, Zsuzsa; Svingor, E.; Futo, I.; Palcsu, L.; Molnar, M.

    2001-01-01

    The vast economic size of the food market offers great temptations for the production and sale of fraudulent products, adulterated products and synthetic products that are labeled as natural ones. Conventional techniques of chemical analyses have served the food industry well for many years but are limited in their ability to detect certain types of fraudulent or mislabelled products. The aversion to added sugar and the demand for 'all natural' food products among consumers has led to a great deal of mislabelling on the part of food processors in order to achieve greater economic gain. The nature of deceptions detectable by carbon Stable Isotope Ratio Analysis (SIRA) in food technology falls into three broad categories. The most common is the adulteration of an expensive natural product, such as apple juice, with a much cheaper natural product such as cane sugar or high fructose corn syrup (HFCS). The second is outright falsification of a food. An example is maple syrup produced by simple addition of maple flavoring to a sugar syrup or HFCS. The third general category is the sale of synthetic materials as natural ones or the addition of synthetic materials to natural ones in order to increase the volume of the product. The procedure for using carbon SIRA in monitoring food products involves two stages. It must first be established that the product to be analyzed, or some specific component of it, has a particular isotopic composition that can be distinguished from that of the materials that might be used to adulterate it. Potential adulterating components are then analyzed to establish their isotopic identity. The carbon SIRA method cannot, in general, be used to establish purity unequivocally but it can be used to establish impurity or adulteration with a high degree of success. The overall process of carbon SIRA consists of three stages: selection of the sample or the isolation of the particular compound to be analyzed, conversion of this compound into CO 2 gas

  19. Armstrong Flight Research Center Research Technology and Engineering 2017

    Science.gov (United States)

    Voracek, David F. (Editor)

    2018-01-01

    I am delighted to present this report of accomplishments at NASA's Armstrong Flight Research Center. Our dedicated innovators possess a wealth of performance, safety, and technical capabilities spanning a wide variety of research areas involving aircraft, electronic sensors, instrumentation, environmental and earth science, celestial observations, and much more. They not only perform tasks necessary to safely and successfully accomplish Armstrong's flight research and test missions but also support NASA missions across the entire Agency. Armstrong's project teams have successfully accomplished many of the nation's most complex flight research projects by crafting creative solutions that advance emerging technologies from concept development and experimental formulation to final testing. We are developing and refining technologies for ultra-efficient aircraft, electric propulsion vehicles, a low boom flight demonstrator, air launch systems, and experimental x-planes, to name a few. Additionally, with our unique location and airborne research laboratories, we are testing and validating new research concepts. Summaries of each project highlighting key results and benefits of the effort are provided in the following pages. Technology areas for the projects include electric propulsion, vehicle efficiency, supersonics, space and hypersonics, autonomous systems, flight and ground experimental test technologies, and much more. Additional technical information is available in the appendix, as well as contact information for the Principal Investigator of each project. I am proud of the work we do here at Armstrong and am pleased to share these details with you. We welcome opportunities for partnership and collaboration, so please contact us to learn more about these cutting-edge innovations and how they might align with your needs.

  20. 76 FR 15986 - Alpha Omega Technology, Inc.; Denial Without Prejudice of Food Additive Petition

    Science.gov (United States)

    2011-03-22

    ...] (Formerly Docket No. 90F-0074) Alpha Omega Technology, Inc.; Denial Without Prejudice of Food Additive... Administration (FDA) is denying a food additive petition (FAP 0M4181) proposing that the food additive... 15, 1990 (55 FR 9772), FDA announced that a food additive petition (FAP 0M4181) had been filed by...

  1. MAFF sponsored research: detection tests for irradiated food

    International Nuclear Information System (INIS)

    Blackburn, C.M.; Holley, P.A.; Pryke, D.C.

    1993-01-01

    In their 1986 report on the safety and wholesomeness of irradiated food the UK Advisory Committee on Irradiated and Novel Foods (ACINF) recognised that a generally applicable test to determine if a food had been irradiated was not available. The committee considered that, although not a pre-requisite, the existence of a detection test would be a useful supplement to a control system and do much to reassure consumers; with this in mind ACINF recommended that detection methods should be kept under review. As a consequence, in 1987 the Ministry initiated a comprehensive R and D detection test programme. Over fifty papers have been published to date as a result of this programme. MAFF (Ministry Of Agriculture Fisheries and Food) has also been involved in other research associated with irradiation and food safety, some of which is described in this paper. This paper aims to give an overview of recent work funded under the food irradiation programme. Twelve projects have been supported over the last two years, ten of which involved the development of detection tests for irradiated food. A summary of these projects is presented: - Thermoluminescence; - Electron Spin Resonance; - 2-alkylcyclobutanones; -Determination Of Hydrogen; - Differential Scanning Calorimetry; - Limulus Amoebocyte Lysate; - DNA; - Pesticide Breakdown; - Neutron Irradiation; -Future Plans. (orig./vhe)

  2. 2013 Advanced Environmental Health/Advanced Food Technology Standing Review Panel Final Report

    Science.gov (United States)

    Steinberg, Susan

    2014-01-01

    The 2013 Advanced Environmental Health/Advanced Food Technology (AEH/AFT) Standing Review Panel (from here on referred to as the SRP) participated in a WebEx/teleconference with members of the Space Human Factors and Habitability (SHFH) Element, representatives from the Human Research Program (HRP), and NASA Headquarters on November 22, 2013 (list of participants is in Section IX of this report). The SRP reviewed the updated research plans for the Risk of Adverse Health Effects Due to Alterations in Host-Microorganism Interactions (Host Microbe Risk) and the Risk of Performance Decrement and Crew Illness Due to an Inadequate Food System (Food Risk). The SRP also received a status update on the Risk of Adverse Health Effects of Exposure to Dust and Volatiles during Exploration of Celestial Bodies (Dust Risk). Overall, the SRP was impressed with the strong research plans presented by the scientists and staff associated with the SHFH Element. The SRP also thought that the updated research plans were thorough, well organized, and presented in a comprehensive manner. The SRP agrees with the changes made to the Host Microbe Risk and Food Risk portfolios and thinks that the targets for Gap closure are appropriate.

  3. White LED visible light communication technology research

    Science.gov (United States)

    Yang, Chao

    2017-03-01

    Visible light communication is a new type of wireless optical communication technology. White LED to the success of development, the LED lighting technology is facing a new revolution. Because the LED has high sensitivity, modulation, the advantages of good performance, large transmission power, can make it in light transmission light signal at the same time. Use white LED light-emitting characteristics, on the modulation signals to the visible light transmission, can constitute a LED visible light communication system. We built a small visible optical communication system. The system composition and structure has certain value in the field of practical application, and we also research the key technology of transmitters and receivers, the key problem has been resolved. By studying on the optical and LED the characteristics of a high speed modulation driving circuit and a high sensitive receiving circuit was designed. And information transmission through the single chip microcomputer test, a preliminary verification has realized the data transmission function.

  4. Nanofluid Technology: Current Status and Future Research

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Stephen U.-S. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Technology Division

    1998-10-20

    Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as microchannel heat exchangers, and micropumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the microchannels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21st century. This paper gives a brief history of the Advanced Fluids Program at Argonne National Laboratory (ANL), discusses the concept of nanofluids, and provides an overview of the R&D program at ANL on the production, property characterization, and performance of nanofluids. It also describes examples of potential applications and benefits of nanofluids. Finally, future research on the fundamentals and applications of nanofluids is addressed.

  5. Energy Technology Division research summary - 1999.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-31

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization, or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book.

  6. Technology teachers as researchers : philosophical and empirical technology education studies in the Swedish TUFF Research School

    NARCIS (Netherlands)

    Skogh, I.B.; Vries, de M.J.

    2013-01-01

    This book presents the scientific output of the TUFF research school in Sweden. In this school, a group of active teachers worked together on a series of educational research studies. All of those studies were related to the teaching about technology and engineering. The research program consisted

  7. The socialisation of scientific and technological research

    Directory of Open Access Journals (Sweden)

    2009-09-01

    Full Text Available In the last decades, production of science and technology as well as science-society relationships started changing rapidly. Research is asked to be more effective, fast, accountable, trans-disciplinary, result-oriented, policy-driven and able to generate benefits for people and firms in the short and middle run. While a strong intensification of science-society relationships is occurring, an increasing number of actors and stakeholders are involved in research production. At the same time, pervasiveness of technology is rendering users an active part in technological development; economic and social interests on science and technology are growing on a global scale; new democratic and ethical issues emerge. Despite the European institutions’ efforts, all those trends and phenomena are occurring in an extremely fragmented way. In this scenario, a fairly balanced and consistent co-evolution between science and society can no longer be taken for granted. This is just the starting point of the following comment section that, through the Luciano d’Andrea, Sally Wyatt, Erik Aarden, Jos Lejten and Peter Sekloča’s writings, aims to analyse the different aspects and questions around the socialisation of science and technology’s matter.

  8. Soviet precision timekeeping research and technology

    Energy Technology Data Exchange (ETDEWEB)

    Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.

    1991-08-01

    This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs.

  9. Soviet precision timekeeping research and technology

    International Nuclear Information System (INIS)

    Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.

    1991-08-01

    This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs

  10. Investigation of the available technologies and their feasibility for the conversion of food waste into fish feed in Hong Kong.

    Science.gov (United States)

    Cheng, Jack Y K; Lo, Irene M C

    2016-04-01

    Food waste is the largest constituent of municipal solid waste in Hong Kong, but food waste recycling is still in its infancy. With the imminent saturation of all landfill sites by 2020, multiple technologies are needed to boost up the food waste recycling rate in Hong Kong. Conversion of food waste into animal feeds is prevalent in Japan, South Korea, and Taiwan, treating over 40 % of their recycled food waste. This direction is worth exploring in Hong Kong once concerns over food safety are resolved. Fortunately, while feeding food waste to pigs and chickens poses threats to public health, feeding it to fish is considered low risk. In order to examine the feasibility of converting food waste into fish feed in Hong Kong, this paper investigates the market demand, technical viability, feed quality, regulatory hurdles, and potential contribution. The results show that a significant amount of food waste can be recycled by converting it into fish feed due to the enormous demand from feed factories in mainland China. Two conversion technologies, heat drying and black soldier fly bioconversion, are studied extensively. Black soldier fly bioconversion is preferable because the end-product, insect powder, is anticipated to gain import approval from mainland China. The authors suggest further research efforts to speed up its application for food waste recycling in urban cities.

  11. Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

    International Nuclear Information System (INIS)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

    2007-04-01

    Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N 2 ), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N 2 -packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization

  12. Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

    2007-04-15

    Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N{sub 2}), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N{sub 2}-packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization.

  13. Medical technology advances from space research

    Science.gov (United States)

    Pool, S. L.

    1972-01-01

    Details of medical research and development programs, particularly an integrated medical laboratory, as derived from space technology are given. The program covers digital biotelemetry systems, automatic visual field mapping equipment, sponge electrode caps for clinical electroencephalograms, and advanced respiratory analysis equipment. The possibility of using the medical laboratory in ground based remote areas and regional health care facilities, as well as long duration space missions is discussed.

  14. Science, Technology and Innovation Policy Research Organization

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce financement contribuera à renforcer le rôle de la Science, Technology and Innovation Policy Research Organization (STIPRO) en tant qu'organisme crédible de recherche sur les politiques publiques en Tanzanie, en améliorant sa capacité à fournir des recherches de qualité supérieure, influentes et utiles en matière de ...

  15. Research and Development on Food Nutrition Statistical Analysis Software System

    OpenAIRE

    Du Li; Ke Yun

    2013-01-01

    Designing and developing a set of food nutrition component statistical analysis software can realize the automation of nutrition calculation, improve the nutrition processional professional’s working efficiency and achieve the informatization of the nutrition propaganda and education. In the software development process, the software engineering method and database technology are used to calculate the human daily nutritional intake and the intelligent system is used to evaluate the user’s hea...

  16. Energy Technology Division research summary 2001

    International Nuclear Information System (INIS)

    2001-01-01

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the U.S. Department of Energy. As shown on the preceding page, the Division is organized into eight sections, four with concentrations in the materials area and four in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officer, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. This Overview highlights some major ET research areas. Research related to the operational safety of commercial light water nuclear reactors (LWRs) for the U.S. Nuclear Regulatory Commission (NRC) remains a significant area of interest for the Division. We currently have programs on environmentally assisted cracking, steam generator integrity, and the integrity of high-burnup fuel during loss-of-coolant accidents. The bulk of the NRC research work is carried out by three ET sections: Corrosion and Mechanics of Materials; Irradiation Performance; and Sensors, Instrumentation, and Nondestructive Evaluation

  17. 75 FR 37860 - Aris Industries, Inc., Bene Io, Inc., Commodore Separation Technologies, Inc., Food Integrated...

    Science.gov (United States)

    2010-06-30

    ...., Commodore Separation Technologies, Inc., Food Integrated Technologies, Inc., Gap Instrument Corp., Skysat Communications Network Corp., and Vicon Fiber Optics Corp.; Order of Suspension of Trading June 28, 2010. It... information concerning the securities of Food Integrated Technologies, Inc. because it has not filed any...

  18. Feeding trials in organic food quality and health research

    DEFF Research Database (Denmark)

    Velimirov, Alberta; Huber, Machteld; Lauridsen, Charlotte

    2010-01-01

    Feeding experiments comparing organically and conventionally produced food are performed to assess the overall impact on the animals' health as a model for the effects experienced by the human consumers. These experiments are based on systems research and characterized by their focus on production...... research is not just about simple cause-effect chains, but rather about the pluralism of interactions in biological networks; therefore, the interpretation of the outcome of whole food experiments is difficult. Furthermore, the test diets of organic and conventional origin can be constituted in different...... methods, whole food testing and procedures in accordance with the terms of organic farming. A short review of such experiments shows that the majority of these tests revealed effects of the organically produced feed on health parameters such as reproductive performance and immune responses. Systems...

  19. Nanoparticle Technology for Biorefining of Non-Food Source Feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Pruski, Marek; Trewyn, Brian G.; Lee, Young-Jin; Lin, Victor S.-Y.

    2013-01-22

    The goal of this proposed work is to develop and optimize the synthesis of mesoporous nanoparticle materials that are able to selectively sequester fatty acids from hexane extracts from algae, and to catalyze their transformation, as well as waste oils, into biodiesel. The project involves studies of the interactions between the functionalized MSN surface and the sequestering molecules. We investigate the mechanisms of selective extraction of fatty acids and conversion of triglycerides and fatty acids into biodiesel by the produced nanoparticles. This knowledge is used to further improve the properties of the mesoporous nanoparticle materials for both tasks. Furthermore, we investigate the strategies for scaling the synthesis of the catalytic nanomaterials up from the current pilot plant scale to industrial level, such that the biodiesel obtained with this technology can successfully compete with food crop-based biodiesel and petroleum diesel.

  20. Nanoparticle Technology for Biorefinery of Non-Food Source Feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Pruski, Marek [Ames Lab., Ames, IA (United States); Trewyn, Brian [Ames Lab., Ames, IA (United States); Lee, Young-Jin [Ames Lab., Ames, IA (United States); Lin, Victor S.-Y. [Ames Lab., Ames, IA (United States)

    2013-01-22

    The goal of this proposed work is to develop and optimize the synthesis of mesoporous nanoparticle materials that are able to selectively sequester fatty acids from hexane extracts from algae, and to catalyze their transformation, as well as waste oils, into biodiesel. The project involves studies of the interactions between the functionalized MSN surface and the sequestering molecules. We investigate the mechanisms of selective extraction of fatty acids and conversion of triglycerides and fatty acids into biodiesel by the produced nanoparticles. This knowledge is used to further improve the properties of the mesoporous nanoparticle materials for both tasks. Furthermore, we investigate the strategies for scaling the synthesis of the catalytic nanomaterials up from the current pilot plant scale to industrial level, such that the biodiesel obtained with this technology can successfully compete with food crop-based biodiesel and petroleum diesel.

  1. Mutations technology in the service of food security

    International Nuclear Information System (INIS)

    Sobeih, S.A.S.

    2013-01-01

    Nuclear techniques of various physical mutagens such as, X-rays, Gamma rays, Beta partials, Neutrons, Lasers, Electron beams, Ion beams irradiation and some chemical mutagens had significantly contributed in developing superior crop varieties of seeds and vegetatively propagated crops. Those released mutant cultivars in different groups had great economic impact on agriculture and food production and added billions of dollars in the economy of many countries. More than 3200 crops varieties of different crops have been officially released by mutation breeding technique. Almost half (48%) of all mutant crop varieties is recorded in cereals. Rice is the crop with the highest number of mutants and accounts for (53%) of the mutant cereals under cultivations followed by barley which makes up (20%) of all cereals mutant varieties globally. More than half (60%) of the mutants crop varieties have been released in Asia. China alone accounts for more than(25%) of all mutant varieties that have been officially released globally. Nuclear technology is an important way to reduce the gap of food between consumption and climate change and on the other hand to increase production. (author)

  2. A Sustainable Technology Contribuiting to the Food Security

    Directory of Open Access Journals (Sweden)

    Dra. Rosa Catalina Bermúdez-Savòn

    2015-11-01

    Full Text Available A sustainable way for food and energetic security in rural and the city regions, is presented with the application of the solid state fermentation for the biotransformation of lignocellulosic by-products and agro-industrial wastes with white-rot fungi. Inamush as advantages of this technology, is showed the cultivation of mushroom Pleurotus spp.on coffee pulp, cedar chip , coconut and cocoa shells, and the influence of it´s mixture (1:1, trough examination of their growth rates and conversion efficacy to fruiting bodies, which cause contamination of soil and water, because of large volumes and difficult management. The use of residues for these cultive was consolidate such as alternative viable for food production, capable to satisfy the protein and nutritive necessity of population in the non-developing countries, besides low cost production, high protein content and obtention in large quantity in short time. In addition to produce complements for animal feet, such as the spent oyster mushroom substrate postcosecha is detoxified, has proteic content and better digestibility than original substrates,and can be used as animal feed or fertilizer, at the same time, was eradicated the problem of environmental contamination of these residues provoking and further contribution at sustainable development of the communities.

  3. Thermal food processing: new technologies and quality issues

    National Research Council Canada - National Science Library

    Sun, Da-Wen

    2012-01-01

    .... Part I, Modeling of Thermal Food Processes, discusses the thermal physical properties of foods, recent developments in heat and mass transfer, innovative modeling techniques including artificial...

  4. Energy Technology Division research summary 1997

    International Nuclear Information System (INIS)

    1997-01-01

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water nuclear

  5. Energy Technology Division research summary 1997.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-21

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water

  6. INJECTION TECHNOLOGY RESEARCH OF THE PROTECTIVE SCREEN

    Directory of Open Access Journals (Sweden)

    MENEJLYUK A. I.

    2016-12-01

    Full Text Available Formulation of the problem. This article contains information about the methods and the planning principles used in experimental research study of the injection technology of impervious screen. Today, there are ways to create impervious screens and curtains solve soil protection issues in the field impermeable layer arrangement at a shallow depth. However, for Ukraine, in the burial sites of radiation and other wastes is urgent issue of protection of underground space in places with deep impermeable layer. Classical methods can not fully solve such problems. To solve them, you need to develop innovative technology to create such a screen, which will lie authentic sole object to be protected, at the project depth. For the experiments, it is necessary to choose the most important indicator, and technological factors affecting it. This is due to the fact that the proposed technology provides for lesser known technical solutions, the use of which should ultimately result in impervious screens with desired properties. Goal. The aim of this study is the selection of technological parameters of injection, design of experiments and the selection of indicators characterizing the efficient operation of the screen. Such constructs must first have almost zero permeability. In this paper, it was of interest to study the influence of process parameters on the filtration rate of the protective screen. Conclusion. As a result of the design of experiments, the basic technological factors that have a significant effect on the studied parameters. varying levels of these factors are also identified, which in turn makes it possible to determine the optimum process parameters creating a screen that meets all the desired properties and characteristics. Based on a series of experiments it is possible to obtain optimal formulations for different types of soils.

  7. Complexity and conundrums. Citizens' evaluations of potentially contentious novel food technologies using a deliberative discourse approach.

    Science.gov (United States)

    Greehy, Gráinne M; McCarthy, Mary B; Henchion, Maeve M; Dillon, Emma J; McCarthy, Sinéad N

    2013-11-01

    This research considers the processes involved in the formation of attitudes by citizens on potentially contentious novel food technologies (NFTs). Observations of one-to-one deliberative discourses between food scientists and citizens, during which they discussed these technologies, form the basis of this enquiry. This approach enables an exploration of how individuals construct meaning around as well as interpret information about the technologies. Thematic analysis identifies key features that provide the frameworks for citizens' evaluations. How individuals make sense of these technologies is shaped by their beliefs, values and personal characteristics; their perceptions of power and control over the development and sale of NFT related products; and, the extent to which these products are relevant to their personal lives. Internal negotiations between these influences are evident, and evaluations are based on the relative importance of each influence to the individual. Internal conflicts and tensions are associated with citizens' evolving evaluative processes, which may in turn present as attitude ambivalence and instability. Many challenges are linked with engaging with the general public about these technologies, as levels of knowledge, understanding and interest vary. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. NASA's aviation safety research and technology program

    Science.gov (United States)

    Fichtl, G. H.

    1977-01-01

    Aviation safety is challenged by the practical necessity of compromising inherent factors of design, environment, and operation. If accidents are to be avoided these factors must be controlled to a degree not often required by other transport modes. The operational problems which challenge safety seem to occur most often in the interfaces within and between the design, the environment, and operations where mismatches occur due to ignorance or lack of sufficient understanding of these interactions. Under this report the following topics are summarized: (1) The nature of operating problems, (2) NASA aviation safety research, (3) clear air turbulence characterization and prediction, (4) CAT detection, (5) Measurement of Atmospheric Turbulence (MAT) Program, (6) Lightning, (7) Thunderstorm gust fronts, (8) Aircraft ground operating problems, (9) Aircraft fire technology, (10) Crashworthiness research, (11) Aircraft wake vortex hazard research, and (12) Aviation safety reporting system.

  9. Organoid technology for brain and therapeutics research.

    Science.gov (United States)

    Wang, Zhi; Wang, Shu-Na; Xu, Tian-Ying; Miao, Zhu-Wei; Su, Ding-Feng; Miao, Chao-Yu

    2017-10-01

    Brain is one of the most complex organs in human. The current brain research is mainly based on the animal models and traditional cell culture. However, the inherent species differences between humans and animals as well as the gap between organ level and cell level make it difficult to study human brain development and associated disorders through traditional technologies. Recently, the brain organoids derived from pluripotent stem cells have been reported to recapitulate many key features of human brain in vivo, for example recapitulating the zone of putative outer radial glia cells. Brain organoids offer a new platform for scientists to study brain development, neurological diseases, drug discovery and personalized medicine, regenerative medicine, and so on. Here, we discuss the progress, applications, advantages, limitations, and prospects of brain organoid technology in neurosciences and related therapeutics. © 2017 John Wiley & Sons Ltd.

  10. Risky rays for an improved food supply? National and transnational food irradiation research as a cold war recipe

    International Nuclear Information System (INIS)

    Zachmann, Karin

    2013-01-01

    This paper has dealt with an innovation that first emerged as a radiation-employing experimental system roughly by the 1930s. Within the context of World War II and especially in the first decade of the Cold War, protagonists of the nuclear establishment (the military, governmental officials such as representatives of US Atomic Energy Commissions and other national agencies, science managers, researchers, and others) became interested in these experimental systems and their elements - e.g., radioisotopes or ionizing rays that were used to explore processes of life - not primarily in their capacity to produce new ways of knowing, but because of their potential to yield new ways of doing. Therefore, these protagonists pushed the experimental systems into the world outside the laboratory at an early stage of their development. What at first emerged out of scientific curiosity to learn how ionizing rays would influence living matter was quickly employed to serve political purposes under the circumstances of the Cold War. This happened when, e.g., ionizing rays of such radiation employing experimental systems were applied to agriculture and food in order to prove that the atom could be put to peaceful use. Such applications of methods and techniques from experimental systems developed into powerful hybrids of science, technology and politics that decisively determined the global distribution of knowledge and control in and beyond the Cold War era. These hybrids still exist, even though the Cold War ended two decades ago. They exist as projects to introduce high-dose irradiation to ready-made food in order to serve the need of food industries and food retailers to increase turnover and profits. So far, only attentive representatives of consumers have challenged these projects via the mobilization of counter-expertise to the food-safety promises of the Joint FAO/IAEA Division and the Codex Alimentarius Commission. The fight over the safety of irradiated food, ironically

  11. Guest editorial, special issue on new food processing technologies and food safety

    Science.gov (United States)

    The microflora of foods is very significant to food producers, processors and consumers and the food manufacturers including distributors are responding to consumers’ demand for food products that are safe, fresher and convenient for use. In some cases foods may be improperly processed and/or contam...

  12. Educational Technology Research Journals: "Journal of Research on Technology in Education," 2001-2010

    Science.gov (United States)

    Billings, Christopher; Nielsen, P. Lynne; Snyder, Aaron; Sorensen, Alec; West, Richard E.

    2012-01-01

    In this study, the authors examined the "Journal of Research on Technology in Education (JRTE)" to discover trends from 2001-2010 in the topics covered in the articles, article types (including research methods used), authorship, and citation frequency. Articles from the journal dealt mostly with PK-12 settings and focused on technology…

  13. Research field of fire technology in Finland

    Science.gov (United States)

    Loikkanen, P.; Holm, C.

    1987-02-01

    The goal of the study is to give an overview of the whole diversified research field of fire technology and its problems. For this reason the research subjects have been grouped so that the responsibilities of different authorities, the legislation and specifications, various fields of technology, areas of industry, and groups of products could all be found as clearly as possible. The field has been divided into nine sub-areas. They are: general grounds, fire physics and chemistry, structural fire prevention, textiles and furnishings, devices for heating and other use, detection, fire fighting and rescue, quality control, and special problems. The sub-areas have been divided into 34 main subjects and these, excluding those of special problems, further into as many as 117 subject groups. Characteristics and problems of the sub-areas and the main subjects have been described. The subject groups have been characterized by key words and concepts which outline the projects. No concrete research projects and programs have, however, been directly suggested because their extent and contents depend essentially on financing and other available resources.

  14. Experience and Enlightenment of Dutch Agricultural Research and Technology

    OpenAIRE

    Liu Zhen, Zhen; Hu, D.

    2011-01-01

    This study analyzes the achievements of agricultural science and technology, the reform of agricultural research system and technology transfer system of agricultural in the Netherlands. With case studies, it tries to find the mode of Dutch agricultural research and technology transfer system, and aims to provide suggestions to optimize agricultural research and technology transfer system in China.

  15. Impression management and food intake. Current directions in research.

    Science.gov (United States)

    Vartanian, Lenny R

    2015-03-01

    This paper reviews recent research on consumption stereotypes (judgments of others based on what they eat) and impression management (modifying one's eating behavior in order to create a particular impression). A major recent focus in the literature has been on masculinity and meat eating, with research showing that meat is strongly associated with masculinity, and that individuals who follow a meat-based diet are perceived as more masculine than are individuals who follow a vegetarian diet. Although direct evidence for impression management through food intake remains sparse, a number of methodological approaches (including priming techniques and ecological valid assessments) are described that could be used in future research to identify the motives underlying people's eating behavior. Consumption stereotypes and impression management may be important influences on people's eating behavior, but the complexities of how, when, and for whom these factors influence food intake are still not well understood. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Research & Technology Report Goddard Space Flight Center

    Science.gov (United States)

    Soffen, Gerald A. (Editor); Truszkowski, Walter (Editor); Ottenstein, Howard (Editor); Frost, Kenneth (Editor); Maran, Stephen (Editor); Walter, Lou (Editor); Brown, Mitch (Editor)

    1995-01-01

    The main theme of this edition of the annual Research and Technology Report is Mission Operations and Data Systems. Shifting from centralized to distributed mission operations, and from human interactive operations to highly automated operations is reported. The following aspects are addressed: Mission planning and operations; TDRSS, Positioning Systems, and orbit determination; hardware and software associated with Ground System and Networks; data processing and analysis; and World Wide Web. Flight projects are described along with the achievements in space sciences and earth sciences. Spacecraft subsystems, cryogenic developments, and new tools and capabilities are also discussed.

  17. The research on NURBS adaptive interpolation technology

    Science.gov (United States)

    Zhang, Wanjun; Gao, Shanping; Zhang, Sujia; Zhang, Feng

    2017-04-01

    In order to solve the problems of Research on NURBS Adaptive Interpolation Technology, such as interpolation time bigger, calculation more complicated, and NURBS curve step error are not easy changed and so on. This paper proposed a study on the algorithm for NURBS adaptive interpolation method of NURBS curve and simulation. We can use NURBS adaptive interpolation that calculates (xi, yi, zi). Simulation results show that the proposed NURBS curve interpolator meets the high-speed and high-accuracy interpolation requirements of CNC systems. The interpolation of NURBS curve should be finished. The simulation results show that the algorithm is correct; it is consistent with a NURBS curve interpolation requirements.

  18. The influence of organic production on food quality - research findings, gaps and future challenges.

    Science.gov (United States)

    Załęcka, Aneta; Bügel, Susanne; Paoletti, Flavio; Kahl, Johannes; Bonanno, Adriana; Dostalova, Anne; Rahmann, Gerold

    2014-10-01

    Although several meta-analysis studies have been published comparing the quality of food derived from organic and non-organic origin, it is still not clear if food from organic production per se can guarantee product-related added value to consumers. This paper aims to summarize the status quo in order to identify research gaps and suggest future research challenges. Organic food is described according to a quality model already published. The influence of organic production on food quality is structured in primary production and processing. Furthermore, organic food authentication is discussed. Organic food seems to contain fewer pesticide residues and statistically more selected health-related compounds such as polyphenols in plant products and polyunsaturated fatty acids in milk and meat products, but the health relevance for consumers is not clear yet. Comparing food from organic origin with so called 'conventional' food seems not to be appropriate, because 'conventional' is not defined. In organic food quality research a system approach is needed from which systemic markers can be selected. Research on the impact of processing technologies on the quality according to organic principles seems of high relevance, since most of the food is processed. © 2014 Society of Chemical Industry.

  19. Trends in Food Research and Development: A Survey of the Commercial Food Industry

    Science.gov (United States)

    1987-09-01

    top priority of research and development in the food industry; however, the consumer market has chanqed dramatically since the beginning of this decade...Canned & Preserved Fruits & Vegetables 45.6 204 Grain Mill Products 32.4 205 Bakery Products 33.8 206 Sugar & Confectionery Products 32.4 207 Fats & Oils...15.6 40.6 39.1 Aseptic Packaging of Particulates 0.0 0.0 14.5 36.0 49.5 Genetic Engineering 1.5 7.6 21.2 36.4 33.3 The market share of frozen foods is

  20. Food safety and quality through radiation technology: its implications to national security

    Energy Technology Data Exchange (ETDEWEB)

    Lanuza, Luvimina G.

    2012-08-15

    The increasing consumption of ready-to-eat meals necessitates a review of its quality and safety. Food irradiation is a technology that would allow the food product to be free from pathogenic organisms while maintaining its fresh-like taste and appearance. The paper evaluated the effectiveness of food irradiation in maintaining the quality and safety of ready-to-eat meals using the three criteria: microbiological, nutritional and acceptability. Chicken adobo was chosen as a representative ready-to-eat meat. Primary data was collected through experimental and non-experimental methods using irradiated and non-irradiated chicken adobo. Irradiation was carried out at the Multipurpose Irradiation Facility of the Philippine Nuclear Research Institute using a radiation dose of 4 kGy at an irradiation temperature of 29.9-32.1 degree centigrade. Experimental data were gathered through laboratory analyses. Nutritional analyses (protein and Vitamin B{sub 1}) as well as microbiological analyses (E. Coli) were conducted at Day 1, Day 7 and Day 15 stored at -4 degree centigrade after irradiation. The non-experimental data were gathered by means of acceptability questionnaires which made use of a modified Likert scale of 1 to 4. This made the respondents rate the food attributes (color, odor, flavor, texture, juiciness) and overall acceptability during the sensory evaluation of both Sample A (irradiated) and Sample B (non-irradiated). There were two sets of respondents, the professional and non-professional sector. The laboratory-scale study revealed that the application of gamma irradiation of a dose of 4 kGy at an irradiation temperature range of 29.9 to 32.1 degree centigrade to packed ready-to-eat chicken adobo was found to be an effective treatment for eliminating the E.coli pathogen even up to Day 15 stored at -4 degree centigrade after irradiation. The protein and Vitamin B{sub 1} contents of the food sample were not significantly affected and results of the acceptability

  1. Food safety and quality through radiation technology: its implications to national security

    International Nuclear Information System (INIS)

    Lanuza, Luvimina G.

    2012-08-01

    The increasing consumption of ready-to-eat meals necessitates a review of its quality and safety. Food irradiation is a technology that would allow the food product to be free from pathogenic organisms while maintaining its fresh-like taste and appearance. The paper evaluated the effectiveness of food irradiation in maintaining the quality and safety of ready-to-eat meals using the three criteria: microbiological, nutritional and acceptability. Chicken adobo was chosen as a representative ready-to-eat meat. Primary data was collected through experimental and non-experimental methods using irradiated and non-irradiated chicken adobo. Irradiation was carried out at the Multipurpose Irradiation Facility of the Philippine Nuclear Research Institute using a radiation dose of 4 kGy at an irradiation temperature of 29.9-32.1 degree centigrade. Experimental data were gathered through laboratory analyses. Nutritional analyses (protein and Vitamin B 1 ) as well as microbiological analyses (E. Coli) were conducted at Day 1, Day 7 and Day 15 stored at -4 degree centigrade after irradiation. The non-experimental data were gathered by means of acceptability questionnaires which made use of a modified Likert scale of 1 to 4. This made the respondents rate the food attributes (color, odor, flavor, texture, juiciness) and overall acceptability during the sensory evaluation of both Sample A (irradiated) and Sample B (non-irradiated). There were two sets of respondents, the professional and non-professional sector. The laboratory-scale study revealed that the application of gamma irradiation of a dose of 4 kGy at an irradiation temperature range of 29.9 to 32.1 degree centigrade to packed ready-to-eat chicken adobo was found to be an effective treatment for eliminating the E.coli pathogen even up to Day 15 stored at -4 degree centigrade after irradiation. The protein and Vitamin B 1 contents of the food sample were not significantly affected and results of the acceptability tests

  2. Decommissioning Technology Development for Nuclear Research Facilities

    International Nuclear Information System (INIS)

    Lee, K. W.; Kang, Y. A.; Kim, G. H.

    2007-06-01

    It is predicted that the decommissioning of a nuclear power plant would happen in Korea since 2020 but the need of partial decommissioning and decontamination for periodic inspection and life extension still has been on an increasing trend and its domestic market has gradually been extended. Therefore, in this project we developed following several essential technologies as a decommissioning R and D. The measurement technology for in-pipe radioactive contamination was developed for measuring alpha/beta/gamma emitting nuclides simultaneously inside a in-pipe and it was tested into the liquid waste transfer pipe in KRR-2. And the digital mock-up system for KRR-1 and 2 was developed for choosing the best scenarios among several scenarios on the basis of various decommissioning information(schedule, waste volume, cost, etc.) that are from the DMU and the methodology of decommissioning cost estimation was also developed for estimating a research reactor's decommissioning cost and the DMU and the decommissioning cost estimation system were incorporated into the decommissioning information integrated management system. Finally the treatment and management technology of the irradiated graphites that happened after decommissioning KRR-2 was developed in order to treat and manage the irradiated graphites safely

  3. Research Opportunities for Fischer-Tropsch Technology

    International Nuclear Information System (INIS)

    Jackson, Nancy B.

    1999-01-01

    Fischer-Tropsch synthesis was discovered in Germany in the 1920's and has been studied by every generation since that time. As technology and chemistry, in general, improved through the decades, new insights, catalysts, and technologies were added to the Fischer-Tropsch process, improving it and making it more economical with each advancement. Opportunities for improving the Fischer-Tropsch process and making it more economical still exist. This paper gives an overview of the present Fischer-Tropsch processes and offers suggestions for areas where a research investment could improve those processes. Gas-to-liquid technology, which utilizes the Fischer Tropsch process, consists of three principal steps: Production of synthesis gas (hydrogen and carbon monoxide) from natural gas, the production of liquid fuels from syngas using a Fischer-Tropsch process, and upgrading of Fischer-Tropsch fuels. Each step will be studied for opportunities for improvement and areas that are not likely to reap significant benefits without significant investment

  4. Decommissioning Technology Development for Nuclear Research Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. W.; Kang, Y. A.; Kim, G. H. (and others)

    2007-06-15

    It is predicted that the decommissioning of a nuclear power plant would happen in Korea since 2020 but the need of partial decommissioning and decontamination for periodic inspection and life extension still has been on an increasing trend and its domestic market has gradually been extended. Therefore, in this project we developed following several essential technologies as a decommissioning R and D. The measurement technology for in-pipe radioactive contamination was developed for measuring alpha/beta/gamma emitting nuclides simultaneously inside a in-pipe and it was tested into the liquid waste transfer pipe in KRR-2. And the digital mock-up system for KRR-1 and 2 was developed for choosing the best scenarios among several scenarios on the basis of various decommissioning information(schedule, waste volume, cost, etc.) that are from the DMU and the methodology of decommissioning cost estimation was also developed for estimating a research reactor's decommissioning cost and the DMU and the decommissioning cost estimation system were incorporated into the decommissioning information integrated management system. Finally the treatment and management technology of the irradiated graphites that happened after decommissioning KRR-2 was developed in order to treat and manage the irradiated graphites safely.

  5. Biomedical engineering frontier research and converging technologies

    CERN Document Server

    Jun, Ho-Wook; Shin, Jennifer; Lee, SangHoon

    2016-01-01

    This book provides readers with an integrative overview of the latest research and developments in the broad field of biomedical engineering. Each of the chapters offers a timely review written by leading biomedical engineers and aims at showing how the convergence of scientific and engineering fields with medicine has created a new basis for practically solving problems concerning human health, wellbeing and disease. While some of the latest frontiers of biomedicine, such as neuroscience and regenerative medicine, are becoming increasingly dependent on new ideas and tools from other disciplines, the paradigm shift caused by technological innovations in the fields of information science, nanotechnology, and robotics is opening new opportunities in healthcare, besides dramatically changing the ways we actually practice science. At the same time, a new generation of engineers, fluent in many different scientific “languages,” is creating entirely new fields of research that approach the “old” questions f...

  6. 2015 Advanced Environmental Health/Advanced Food Technology Standing Review Panel

    Science.gov (United States)

    Steinberg, Susan

    2015-01-01

    The 2015 Advanced Environmental Health/Advanced Food Technology (AEH/AFT) Standing Review Panel (from here on referred to as the SRP) met for a site visit in Houston, TX on December 14 - 15, 2015. The SRP met with representatives from the Space Human Factors and Habitability (SHFH) Element and members of the Human Research Program (HRP) to review the updated research plans for the Risk of Adverse Health Effects Due to Host-Microorganism Interactions (MicroHost Risk) and the Risk of Performance Decrement and Crew Illness due to an Inadequate Food System (Food Risk). During the meeting, the SRP also met with the vehicle engineers to discuss possible food storage options. The SRP would like to commend Dr. Oubre and Dr. Douglas for their detailed presentations, as well the frank, refreshing, and comprehensive engineering presentation. This gave much needed perspective to the food storage issues and reassured the committee about NASA's approach to the problem. In terms of critiques, the SRP remains unconvinced about the rationale for probiotic use other than for specific applications supported by the literature. It is not clear what gap or problem is being addressed by the use of probiotics, and the rationale for their use needs to be clearly rooted in the available literature. The SRP thinks that if low-Earth orbit is associated with immune system impairment, then there may additional risks linked with the use of probiotics. It is not clear to the SRP how NASA will determine if probiotics are having their intended beneficial effect. A similar concern is raised as to what gaps or problems are being addressed by "functional foods". Mixed infections, rather than single species infections, which can augment severity of disease, also represent a significant concern. Overall, the SRP considers this to be a strong program that is well-organized, well-coordinated and generates valuable data.

  7. Blockchain technology for improving clinical research quality.

    Science.gov (United States)

    Benchoufi, Mehdi; Ravaud, Philippe

    2017-07-19

    Reproducibility, data sharing, personal data privacy concerns and patient enrolment in clinical trials are huge medical challenges for contemporary clinical research. A new technology, Blockchain, may be a key to addressing these challenges and should draw the attention of the whole clinical research community.Blockchain brings the Internet to its definitive decentralisation goal. The core principle of Blockchain is that any service relying on trusted third parties can be built in a transparent, decentralised, secure "trustless" manner at the top of the Blockchain (in fact, there is trust, but it is hardcoded in the Blockchain protocol via a complex cryptographic algorithm). Therefore, users have a high degree of control over and autonomy and trust of the data and its integrity. Blockchain allows for reaching a substantial level of historicity and inviolability of data for the whole document flow in a clinical trial. Hence, it ensures traceability, prevents a posteriori reconstruction and allows for securely automating the clinical trial through what are called Smart Contracts. At the same time, the technology ensures fine-grained control of the data, its security and its shareable parameters, for a single patient or group of patients or clinical trial stakeholders.In this commentary article, we explore the core functionalities of Blockchain applied to clinical trials and we illustrate concretely its general principle in the context of consent to a trial protocol. Trying to figure out the potential impact of Blockchain implementations in the setting of clinical trials will shed new light on how modern clinical trial methods could evolve and benefit from Blockchain technologies in order to tackle the aforementioned challenges.

  8. Research and Technology Capabilities Available for Partnership, 2007-2008

    Science.gov (United States)

    2010-01-01

    PZT ). Magnetic Resonance Force Microscopy (MRFM) This system enables nondestructive analysis of semiconductor and biological materials and devices...enables ARL to conduct detailed measurements of the properties of ceramics , polymers, glasses and composites. It features instrumentation for analyzing...and textural characterization of food/food components and chemical heating technologies to facilitate state-of-the-art ration development. The

  9. Automation of Technology for Cancer Research.

    Science.gov (United States)

    van der Ent, Wietske; Veneman, Wouter J; Groenewoud, Arwin; Chen, Lanpeng; Tulotta, Claudia; Hogendoorn, Pancras C W; Spaink, Herman P; Snaar-Jagalska, B Ewa

    2016-01-01

    Zebrafish embryos can be obtained for research purposes in large numbers at low cost and embryos develop externally in limited space, making them highly suitable for high-throughput cancer studies and drug screens. Non-invasive live imaging of various processes within the larvae is possible due to their transparency during development, and a multitude of available fluorescent transgenic reporter lines.To perform high-throughput studies, handling large amounts of embryos and larvae is required. With such high number of individuals, even minute tasks may become time-consuming and arduous. In this chapter, an overview is given of the developments in the automation of various steps of large scale zebrafish cancer research for discovering important cancer pathways and drugs for the treatment of human disease. The focus lies on various tools developed for cancer cell implantation, embryo handling and sorting, microfluidic systems for imaging and drug treatment, and image acquisition and analysis. Examples will be given of employment of these technologies within the fields of toxicology research and cancer research.

  10. Technological aspects of functional food-related carbohydrates.

    NARCIS (Netherlands)

    Voragen, A.G.J.

    1998-01-01

    Carbohydrates in food occur as natural constituents or are added as ingredients or additives. The most important endogenous carbohydrates in food are starch, depolymerized starch, sucrose, lactose, glucose, fructose and sorbitol (digestible) and carbohydrates such as raffinose, stachyose, resistant

  11. Recent Developments in Film and Gas Research in Modified Atmosphere Packaging of Fresh Foods.

    Science.gov (United States)

    Zhang, Min; Meng, Xiangyong; Bhandari, Bhesh; Fang, Zhongxiang

    2016-10-02

    Due to the rise of consumer's awareness of fresh foods to health, in the past few years, the consumption of fresh and fresh-cut produces has increased sturdily. Modified atmosphere packaging (MAP) possesses a potential to become one of the most appropriate technologies for packaging fresh and fresh-cut produces. The MAP has advantages of extending the shelf-life, preserving or stabilizing the desired properties of fresh produces, and convenience in handing and distribution. The success of MAP-fresh foods depends on many factors including types of fresh foods, storage temperature and humidity, gas composition, and the characteristics of package materials. This paper reviews the recent developments highlighting the most critical factors of film and gas on the quality of MAP fresh foods. Although the innovations and development of food packaging technology will continue to promote the development of novel MAP, concentrated research and endeavors from scientists and engineers are still important to the development of MAP that focuses on consumers' requirements, enhancing product quality, environmental friendly design, and cost-effective application.

  12. Health claims on foods: challenge for clinical research companies

    Directory of Open Access Journals (Sweden)

    Essi Sarkkinen

    2012-06-01

    Full Text Available Background The Nutrition and Health Claim Regulation 1924/2006/EC, together with EFSA guidances on the scientific requirements for different type of health claims, is setting the basis for health claim substantiation in the EU. Aim The aim of this presentation is to bring up the key challenges that the food industry and clinical research organizations are facing when meeting these requirements. Results and discussion Key issues in clinical research planning to meet the requirements set for the health claim substantiation are: (1 Selection of right outcome markers since the selection of outcome marker defines actually the formulation of the health claim to be used on food or food ingredient. (2 Selection of right target population since that determines the target consumer group for the food with a health claim. (3 Selection of dose regime and food matrices used since these largely determine the conditions set for the use of the health claim. One of the major challenges in health claim substantiation is the deviant approach to risk factors or biomarkers. From the regulation point of view, a single risk factor approach is emphasized, but from the clinical and scientific point of view the pattern of different risk markers or biomarkers could, in some cases, be a more relevant choice to reflect the final health outcome. This is especially the case in the nutrition and health area because we are often dealing with weak but multiple health effects of certain food items or ingredients. Also the lack of validated well-established biomarkers potent to be affected by diet is a challenge in health claim substantiation.The selection of right target population is often a compromise between choosing a more potential target group to obtain efficacy (i.e. risk factors elevated vs. patient groups and choosing a rationale to generalize the results to wider population (target consumer group.The selection of optimal dosing regime and matrices for a clinical study is

  13. Natural radioactivity (40K) measurement in common food grains using indigenous technology

    International Nuclear Information System (INIS)

    Narayan, Pradeep; Sahani, R.M.; Damor, S.L.; D'Souza, P.M.

    2018-01-01

    Ingestion of contaminated food is one of the major causes of internal doses received in various human organs. As there being no material free from radioactivity on this globe; knowledge of natural radioactivity concentration in common food items is very important for judging the origin of contamination due to nuclear emergency or other man-made activities. An indigenous technology for radioactivity measurement in food/bulk items has been developed and tested using live radioactive sources. This has also been explored for natural radioactivity measurement in common food grains consumed by Indian population. This paper reports the measured natural radioactivity ( 40 K) in common Indian food grains using the developed technology

  14. Cold plasma as a nonthermal food processing technology

    Science.gov (United States)

    Contamination of meats, seafood, poultry, eggs, and fresh and fresh-cut fruits and vegetables is an ongoing concern. Although well-established in non-food applications for surface treatment and modification, cold plasma is a relatively new food safety intervention. As a nonthermal food processing te...

  15. A model for education and promoting food science and technology ...

    African Journals Online (AJOL)

    USER

    2010-08-02

    Aug 2, 2010 ... economics, hospitality management and nutrition/dietetics. FST operates at the .... strategy involved inviting food industry professionals to deliver talks and .... shared outcomes in this case is to see FST education and training alive ... in the concepts of food science and an awareness of food system will help ...

  16. Technology review of commercial food service equipment - final report

    Energy Technology Data Exchange (ETDEWEB)

    Rahbar, S; Krsikapa, S [Canadian Gas Research Inst., Don Mills, ON (Canada); Fisher, D; Nickel, J; Ardley, S; Zabrowski, D [Fisher Consultants (Canada); Barker, R F [ed.

    1996-05-15

    Market and technical information on gas fired equipment used in the commercial food service sector in Canada and in each province or territory was presented. Results of a market study and technology review were integrated to establish energy consumption and energy saving potential in this sector. Eight categories of commercial cooking appliances were studied. They were: fryers, griddles, broilers, ranges, ovens, tilting skillets, steam kettles and steamers. Focus was on gas fired appliances, although electric appliances were also included. The total energy consumption of the appliances was estimated at 76,140.37 GBtu in 1994. Gas appliances accounted for 63 per cent of the total inventory and consumed 83 per cent of the total energy used. Cooking energy efficiencies for the gas fired commercial cooking equipment ranged from 10 per cent to 60 per cent. The electric appliances had cooking energy efficiencies ranging from 35 per cent to 95 per cent. A list of recommendations were made for the many opportunities to introduce higher efficiency commercial cooking appliances, essential to slow down or to stabilize the energy consumption of cooking appliances over the next decade. 66 refs., 14 tabs., 18 figs.

  17. Searching to combine technologies for safer food attainment

    Directory of Open Access Journals (Sweden)

    Lucilla Imbroinise Azeredo Caruso

    2011-06-01

    Full Text Available Campylobacteriosis is an infection frequently acquired through the consumption of animal origin products. Chicken can be considered the main responsible cause in the transmission chain of this disease. Ionizing radiation was used to verify the reduction of the microbiological load of Campylobacter jejuni present in chicken liver, which, in natura, can present contamination in up to 100% of the cases. The doses of irradiation used were: 0.20 kGy, 0.27 kGy, 0.30 kGy and 0.35 kGy. The samples of chicken liver were acquired in aviaries, local supermarkets and large chain supermarkets. The samples were analyzed for Campylobacter at FIOCRUZ. Irradiation was performed at COPPE/UFRJ, using a Gamma Cell Irradiator with a 60Co gamma source. Only the frozen sample acquired at the local supermarket did not contain the bacterium. Campylobacter sp. was present in all other samples, even when using procedures and technologies that aimed at the impediment of the presence of this bacterium in food and, consequently, at the protection of human health. On the whole, the results were satisfactory; nevertheless, it is known that the bacterial growth conditions required by this bacterium are uncommon when compared to other enteropathogenic bacteria.

  18. 76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

    Science.gov (United States)

    2011-07-07

    ... dated July 18, 2002, the International Center for Technology Assessment and the Center for Food Safety... Inspection Service [Docket No. APHIS-2011-0081] International Center for Technology Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered for Herbicide...

  19. Improving livestock production using indigenous resources and conserving the environment. A publication prepared under the framework of a Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology for Asia and the Pacific project with technical support of the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture

    International Nuclear Information System (INIS)

    2010-03-01

    Livestock farming is very important in Asia and the pacific region as a source of livelihood for resource poor farmers' - provision of food and food products and as a source of income. However, livestock productivity in many countries is below their genetic potential because of inadequate and imbalanced feeds and feeding, poor reproductive management and animal diseases exacerbated by lack of effective support services, such as animal husbandry extension, artificial insemination (AI) and/or veterinary services. The International Atomic Energy Agency (IAEA) and the Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology for Asia and the Pacific (RCA), with technical support of the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture, implemented a Technical Cooperation (TC) project entitled 'Integrated Approach for Improving Livestock Production using Indigenous Resources and Conserving the Environment' (RAS/5/044). The overall objective of the project was to improve livestock productivity through better nutritional and reproduction strategies while conserving the environment. The specific objectives were (i) to improve animal productivity and decrease emission of selected greenhouse gases, (methane and carbon dioxide) and selected nutrients (nitrogen and phosphorus) into the environment; and (ii) to identify and adopt better breeding strategies that would improve animal productivity. This publication contains research results presented by scientists during the final review meeting incorporating the contributions of the experts associated with RAS/5/044. It is hoped that this publication will help stimulate further discussion, research and development into ways of improving the efficiency and productivity of livestock thus leading to higher income for smallholder farmers in the region

  20. Ultraviolet Technology For Food Preservation [tecnologia De Ultravioleta Para Preservação De Alimentos

    OpenAIRE

    Guedes A.M.M.; Novello D.; Mendes G.M.P.; Cristianini M.

    2009-01-01

    This literature review article had as objective to gather information about ultraviolet (UV) technology utilization on the food industry, its effects and potential application. Aspects as the origin, concept and applications of the technology on the equipment industry and running mechanisms were approached. The application of UV radiation on food decontamination is still little used due its low penetration, but it is known that it can be easily applied to solid and liquid food products. The r...

  1. Spacecraft computer technology at Southwest Research Institute

    Science.gov (United States)

    Shirley, D. J.

    1993-01-01

    Southwest Research Institute (SwRI) has developed and delivered spacecraft computers for a number of different near-Earth-orbit spacecraft including shuttle experiments and SDIO free-flyer experiments. We describe the evolution of the basic SwRI spacecraft computer design from those weighing in at 20 to 25 lb and using 20 to 30 W to newer models weighing less than 5 lb and using only about 5 W, yet delivering twice the processing throughput. Because of their reduced size, weight, and power, these newer designs are especially applicable to planetary instrument requirements. The basis of our design evolution has been the availability of more powerful processor chip sets and the development of higher density packaging technology, coupled with more aggressive design strategies in incorporating high-density FPGA technology and use of high-density memory chips. In addition to reductions in size, weight, and power, the newer designs also address the necessity of survival in the harsh radiation environment of space. Spurred by participation in such programs as MSTI, LACE, RME, Delta 181, Delta Star, and RADARSAT, our designs have evolved in response to program demands to be small, low-powered units, radiation tolerant enough to be suitable for both Earth-orbit microsats and for planetary instruments. Present designs already include MIL-STD-1750 and Multi-Chip Module (MCM) technology with near-term plans to include RISC processors and higher-density MCM's. Long term plans include development of whole-core processors on one or two MCM's.

  2. Innovative sport technology through cross-disciplinary research ...

    African Journals Online (AJOL)

    Innovative sport technology through cross-disciplinary research: Future of sport ... South African Journal for Research in Sport, Physical Education and Recreation ... of the advantages and disadvantages of innovative sport technology brought ...

  3. Science, Technology and Arts Research Journal: Site Map

    African Journals Online (AJOL)

    Science, Technology and Arts Research Journal: Site Map. Journal Home > About the Journal > Science, Technology and Arts Research Journal: Site Map. Log in or Register to get access to full text downloads.

  4. Science, Technology and Arts Research Journal: Journal Sponsorship

    African Journals Online (AJOL)

    Science, Technology and Arts Research Journal: Journal Sponsorship. Journal Home > About the Journal > Science, Technology and Arts Research Journal: Journal Sponsorship. Log in or Register to get access to full text downloads.

  5. Decommissioning technology development for research reactors

    International Nuclear Information System (INIS)

    Lee, K. W.; Kim, S. K.; Kim, Y. K.

    2004-03-01

    Although it is expected that the decommissioning of a nuclear power plant will happen since 2020, the need of partial decommissioning and decontamination for periodic inspection and life extension has been on an increasing trend and domestic market has gradually been extended. Therefore, in this project the decommissioning DB system on the KRR-1 and 2 was developed as establishing the information classification system of the research reactor dismantling and the structural design and optimization of the decommissioning DB system. Also in order to secure the reliability and safety about the dismantling process, the main dismantling simulation technology that can verify the dismantling process before their real dismantling work was developed. And also the underwater cutting equipment was developed to remove these stainless steel parts highly activated from the RSR. First, the its key technologies were developed and then the design, making, and capability analysis were performed. Finally the actual proof was achieved for applying the dismantling site. an automatic surface contamination measuring equipment was developed in order to get the sample automatically and measure the radiation/radioactivity

  6. Rare earths: harvesting basic research for technology

    International Nuclear Information System (INIS)

    Jagatap, B.N.

    2014-01-01

    In recent years, rare earths are increasingly becoming a versatile platform for basic research that presents enormous technological potentials. A variety of nano-sized inorganic matrices varying from oxides, phosphates, gallates and aluminates, tungstates, stannates, vanadates to fluorides doped with different lanthanide ions have been synthesized and their optical properties have been investigated in the Chemistry Group, BARC. Another interesting application is laser cooling of solids using rare earth doped glasses with potential applications in remote cooling of electronic devices. Combining the luminescence properties of rare earths with photonic crystals is yet another potent area with wide ranging applications. In this presentation we provide an overview of these developments with examples from the R and D programs of the Chemistry Group, BARC

  7. The application of new technologies in food microbiological inspection and detection

    Directory of Open Access Journals (Sweden)

    CHEN Wenwen

    2016-02-01

    Full Text Available In today′s society,as people′s demand for food increases,the problem of food safety is getting more and more concerns.Therefore it is very necessary to seek and to establish the rapid method detection of food microorganisms.This paper presents several new technologies for rapid detection of food microorganism and their application in the practical detection.

  8. Current and future benefits from the use of GM technology in food production.

    Science.gov (United States)

    Engel, K-H; Frenzel, Th; Miller, A

    2002-02-28

    For the current generation of genetically modified (GM) crops the improvement of agronomic traits (e.g. herbicide tolerance, insect resistance) has been a major objective. The lack of obvious and direct benefits for the consumer has been a main point of criticism. Future trends will increasingly encompass the modification of quality traits, such as the improvement of sensory and especially nutritional properties. Some of the ongoing developments try to meet the desire of consumers for 'healthy' or 'high-tech' foods in developed countries. Others are intended to assist in adjusting the nutritional status of foods to the needs of consumers in developing countries. Considering the increasing world population and the limited amount of arable land, GM technology may also become a valuable tool to ensure food security. The major prerequisite for the applicability of the technique is the safety of the resulting products. The increasing complexity of modifications intended might require adjustments and improvements of the strategies applied to the safety assessment of GM foods. Present research activities try to meet these new challenges.

  9. Nutrition research to affect food and a healthy lifespan12

    Science.gov (United States)

    Ohlhorst, Sarah D.; Russell, Robert; Bier, Dennis; Klurfeld, David M.; Li, Zhaoping; Mein, Jonathan R.; Milner, John; Ross, A. Catharine; Stover, Patrick; Konopka, Emily

    2013-01-01

    Proper nutrition offers one of the most effective and least costly ways to decrease the burden of many diseases and their associated risk factors, including obesity. Nutrition research holds the key to increasing our understanding of the causes of obesity and its related comorbidities and thus holds promise to markedly influence global health and economies. After outreach to 75 thought leaders, the American Society for Nutrition (ASN) convened a Working Group to identify the nutrition research needs whose advancement will have the greatest projected impact on the future health and well-being of global populations. ASN’s Nutrition Research Needs focus on the following high priority areas: 1) variability in individual responses to diet and foods; 2) healthy growth, development, and reproduction; 3) health maintenance; 4) medical management; 5) nutrition-related behaviors; and 6) food supply/environment. ASN hopes the Nutrition Research Needs will prompt collaboration among scientists across all disciplines to advance this challenging research agenda given the high potential for translation and impact on public health. Furthermore, ASN hopes the findings from the Nutrition Research Needs will stimulate the development and adoption of new and innovative strategies that can be applied toward the prevention and treatment of nutrition-related diseases. The multidisciplinary nature of nutrition research requires stakeholders with differing areas of expertise to collaborate on multifaceted approaches to establish the evidence-based nutrition guidance and policies that will lead to better health for the global population. In addition to the identified research needs, ASN also identified 5 tools that are critical to the advancement of the Nutrition Research Needs: 1) omics, 2) bioinformatics, 3) databases, 4) biomarkers, and 5) cost-effectiveness analysis. PMID:24038264

  10. Energy Technologies Research and Education Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Ghassemi, Abbas [New Mexico State Univ., Las Cruces, NM (United States); Ranade, Satish [New Mexico State Univ., Las Cruces, NM (United States)

    2014-12-31

    For this project, the intended goal of the microgrid component was to investigate issues in policy and technology that would drive higher penetration of renewable energy, and to demonstrate implementation in a utility system. The work accomplished on modeling the dynamics of photovoltaic (PV) penetration can be expanded for practical application. Using such a tool those involved in public policy can examine what the effect of a particular policy initiative, e.g., renewable portfolio standards (RPS) requirements, might be in terms of the desired targets. The work in the area of microgrid design, protection, and operation is fundamental to the development of microgrids. In particular the “Energy Delivery” paradigm provides new opportunities and business models for utilities. Ultimately, Energy Delivery could accrue significant benefits in terms of costs and resiliency. The experimental microgrid will support continued research and allow the demonstration of technology for better integration of renewables. The algal biofuels component of the project was developed to enhance the test facility and to investigate the technical and economic feasibility of a commercial-scale geothermal algal biofuels operation for replication elsewhere in the arid Southwest. The project was housed at New Mexico State University’s (NMSU’s) Geothermal Aquaculture Facility (GAF) and a design for the inoculation train and algae grow-out process was developed. The facility was upgraded with modifications to existing electrical, plumbing and structural components on the GAF and surrounding grounds. The research work was conducted on biomass-processing, harvesting, dewatering, and extraction. Additionally, research was conducted to determine viability of using low-cost, wastewater from municipal treatment plants in the cultivation units as make-up water and as a source of nutrients, including nitrogen and soluble phosphorus. Data was collected on inputs and outputs, growth evaluation and

  11. Promoting Agricultural Research and Development to Strengthen Food Security in South Asia

    Directory of Open Access Journals (Sweden)

    Ghose Bishwajit

    2014-01-01

    Full Text Available This study aims to highlight the status of agricultural R&D in South Asia and contends that creating an effective agricultural research and innovation systems is a vital element to ensure food security in this region. South Asia is home to around one-fourth of mankind and houses the largest proportion of undernourished people in the world. Despite a period of marked economic growth averaging 6% a year over the past two decades, it remains the world's second poorest region contributing a mere 2.2% in global annual GDP. Agriculture is the mainstay of South Asian economy employing around 60% of the total workforce and generating around 20% of total GDP. South Asia has the recognition of being the second most food-insecure region next only to sub-Saharan Africa. Though there is growing evidence that technological innovation has a key role to play in increasing agricultural production and strengthening food security, agricultural research and development (R&D sector has failed to garner sufficient attention till now. This study also depicts the current situation of food security in South Asia and illustrates how agricultural education and innovation hold the master key to solve the food security issues for the world's most densely populated region.

  12. Educational Technology Research Journals: Educational Technology Research and Development 2001-2010

    Science.gov (United States)

    Zaugg, Holt; Amado, Mayavel; Small, Tyler R.; West, Richard E.

    2011-01-01

    This article examines 10 years (2001-2010) of journal articles from "Educational Technology Research and Development" (ETR&D) to determine trends in article topics, key contributing authors, citation patterns, and methodological trends. The analysis identified several unique characteristics of this journal over the past decade, including a balance…

  13. Using design science in educational technology research projects

    Directory of Open Access Journals (Sweden)

    Susan M. Chard

    2017-12-01

    Full Text Available Design science is a research paradigm where the development and evaluation of a technology artefact is a key contribution. Design science is used in many domains and this paper draws on those domains to formulate a generic structure for design science research suitable for educational technology research projects. The paper includes guidelines for writing proposals using the design science research methodology for educational technology research and presents a generic research report structure. The paper presents ethical issues to consider in design science research being conducted in educational settings and contributes guidelines for assessment when the research contribution involves the creation of a technology artefact.

  14. Safeguards technology research and development at CIAE

    International Nuclear Information System (INIS)

    Yang Qun

    2001-01-01

    Full text: China Institute of Atomic Energy (CIAE) is a multi-disciplinary institute under the leadership of China National Nuclear Corporation (CNNC). The Laboratory of Technical Research for Nuclear Safeguards was established at CIAE in 1991 to develop safeguards technology and to provide technical assistance to competent authorities for nuclear material management and control, which became one of the key laboratories approved by CNNC in 1993. The main research works for safeguards at CIAE include: nuclear material control and accounting, facilities license review and assessment, domestic inspection, NDA and DA analysis, physical protection and technical training. Research and development of equipment and technique for safeguards has been continuing at CIAE. A variety of NDA equipment that has different resolution and analysis capability has been developed. Method of NDA measurement has been investigated for nuclear material with different characteristics. Mathematics method such as Monte Carlo simulation is applied in NDA. Advanced destructive analysis (DA) instrument is installed at laboratory of CIAE, such as TIMS, ICP-MS and electronic chemistry analyzing system. The high accuracy results of element analysis and isotopic analysis for nuclear material can be obtained. It is possible to measure the types and quantities of nuclear material in a given area by means of NDA and DA. Physical protection system has also been developed. It consists of access control and management, various alarm (including perimeter alarm, intrusion alarms, fire alarms), video and audio monitors, intercommunication set and central console. The system can meet technical requirement for safeguards of first rank. Nuclear material accounting is an important aspect of safeguards research at CIAE. The computer software related to material accounting has been developed. It is the important task for scientists at CIAE to design and review nuclear accounting systems in various facilities. For

  15. Research to support development of organic food and farming

    OpenAIRE

    Watson, Christine; Alrøe, Hugo; Kristensen, Erik Steen

    2006-01-01

    Agriculture and organic agriculture in particular are developing rapidly, due not only to technological change but also to changes in agricultural policy and public expectation. Research allows new knowledge to be developed and is thus vital for the future of organic agriculture. We can ask the question, what is the purpose of research on organic farming? Is it to increase yield and productivity, to compare it with other forms of agriculture, or to quantify its environmental and social impact...

  16. Research and Development Strategy in Biological Technologies: A Patent Data Analysis of Japanese Manufacturing Firms

    Directory of Open Access Journals (Sweden)

    Hidemichi Fujii

    2016-04-01

    Full Text Available Biological technology allows us to invent new medical approaches, create effective food production methods and reserves and develop new materials for industrial production. There is a diversity of biological technology types, and different technologies have different priorities for invention. This study examines the factors that are important for the invention of biology-related technologies in Japan using patent application data and a decomposition analysis framework. As the results show, patent applications related to biochemistry and biotechnology increased until 1995 because of the expanded scale of R&D activities and the high priority assigned to biological technology. However, the number of patent applications stagnated after 1995, because the importance of biochemistry, especially waste-gas treatment technologies, decreased. Additionally, patent applications for medicines and disease-related technologies increased rapidly from 1971 to 1995. The primary determinant of rapid growth is an increase in research priority, especially among firms in the chemical industry whose technologies are related to supplemental foods and foods with health-promoting benefits. Finally, patent applications involving foodstuff- and agriculture-related technologies increased from 1971 to 1995 due to increased R&D and the increased priority of biological technology.

  17. Food Security, Institutional Framework and Technology: Examining the Nexus in Nigeria Using ARDL Approach.

    Science.gov (United States)

    Osabohien, Romanus; Osabuohien, Evans; Urhie, Ese

    2018-04-01

    Growth in agricultural science and technology is deemed essential for in-creasing agricultural output; reduce the vulnerability of rural poverty and in turn, food security. Food security and growth in agricultural output depends on technological usages, which enhances the pro-ductive capacity of the agricultural sector. The indicators of food security utilised in this study in-clude: dietary energy supply, average value of food production, prevalence of food inadequacy, among others. In this paper, we examined the level of technology and how investment in the agriculture and technology can improve technical know-how in Nigeria with a view to achieving food security. We carried out the analysis on how investment in technology and institutional framework can improve the level of food availability (a key component of food security) in Nigeria using econ-ometric technique based on Autoregressive Distribution Lag (ARDL) framework. The results showed, inter alia, that in Nigeria, there is a high level of food insecurity as a result of low attention on food production occasioned by the pervasive influence of oil that become the major export product. It was noted that the availability of arable land was one of the major factors to increase food production to solve the challenge of food insecurity. Thus, the efforts of reducing the rate of food insecurity are essential in this regards. This can also be achieved, among others, by active interactions between government and farmers, to make contribution to important planning issues that relate to food production in the country and above all, social protection policies should be geared or channelled to agricultural sector to protect farmers who are vulnerable to shocks and avert risks associated with agriculture.

  18. An Exploratory Research Regarding Romanian Market for Halal Food

    Directory of Open Access Journals (Sweden)

    Valentin-Cosmin SARACIN

    2014-06-01

    Full Text Available The changes in the social structure, the economic crisis, the ageing of the population had an important role in the development of Romania. As a result, Romania must identify other segments and industries in order to rejuvenate the economy of the country. This study focuses on a market niche represented by Halal food products, which are underdeveloped in Romania at this moment. It may represent a potential catalyst for the development of other latent sectors and may consolidate the bilateral relations with the Muslim countries, in conformity with the globalization and the internalization of the global market. The research method used in this study is the thorough analysis of numerous scientific articles and a literature review. It focuses both on the past and the current state of Halal food products and how the development of this market niche can lead to the expansion of other sectors, such as tourism and education.

  19. Radiation technology for value addition to food and agro commodities

    International Nuclear Information System (INIS)

    Sharma, Arun

    2012-01-01

    Assuring adequate food security to citizens of the country requires deployment of strategies for augmenting agricultural production while reducing post-harvest losses. Appropriate post-harvest processing, handling, storage and distribution practices are as important as the efforts to increase productivity for sustained food security, food safety and international trade in agricultural commodities. Nuclear energy has played a significant role both in the improvement of crop productivity, as well as, in the preservation and hygienization of agricultural produce

  20. Safety factors influencing the acceptance of food irradiation technology

    International Nuclear Information System (INIS)

    1989-01-01

    The International Consultative Group on Food Irradiation convened a Task Force Meeting on Public Information of Food Irradiation at the French Commissariat a l'Energie Atomique (CEA), Cadarache from 18 to 21 April 1988. A compilation of scientific papers on subjects of public interest on food irradiation was made by internationally-recognized experts. The report of the meeting and the review papers presented at the meeting are included in this publication. Refs, figs and tabs

  1. Food irradiation: physical-chemical, technological and economical background and competing methods of food preservation

    International Nuclear Information System (INIS)

    Zagorski, Z.P.

    1994-01-01

    Physical, chemical and technical as well as economical background of food preservation by irradiation have been performed. The radiation sources and the elements of radiation chemistry connected with their use in food irradiation process have been shown. The problems of dosimetry and endurance of dose uniformity for processed products have been also discussed. The other methods of food preservation and their weakness and advantages have been also presented and compared with food irradiation method

  2. Using 3 × 3 Matrix to Evaluate the Manufacturing Technology in Food Company

    Directory of Open Access Journals (Sweden)

    Ingaldi Manuela

    2016-06-01

    Full Text Available In order to produce goods of sufficient quality finding buyers in the market, a company must have an adequate knowledge of their production technology. Technologies and finished products at the same time will affect the position of the company in the market and hence its existence in this market. Therefore, it is so important for every company to determine the appropriate technological strategy. The 3 × 3 matrix is a very useful tool to do so. This matrix shows the relation between technological possibilities of the company and its position in the market. However, that requires changing the scale used in the matrix. In practice, this means that both those that have a positive impact on the company and those that have a negative impact on it can be included in the factors. The research was conducted in a food industry company. It turned out that the research company was located in field of the matrix marked as ‚Improve marketing’. It means that the company should put more emphasis on improving the factors related to its position in the market.

  3. The three main monotheistic religions and gm food technology: an overview of perspectives

    Directory of Open Access Journals (Sweden)

    Singer Peter A

    2009-08-01

    Full Text Available Abstract Background Public acceptance of genetically modified crops is partly rooted in religious views. However, the views of different religions and their potential influence on consumers' decisions have not been systematically examined and summarized in a brief overview. We review the positions of the Judaism, Islam and Christianity – the three major monotheistic religions to which more than 55% of humanity adheres to – on the controversies aroused by GM technology. Discussion The article establishes that there is no overarching consensus within the three religions. Overall, however, it appears that mainstream theology in all three religions increasingly tends towards acceptance of GM technology per se, on performing GM research, and on consumption of GM foods. These more liberal approaches, however, are predicated on there being rigorous scientific, ethical and regulatory scrutiny of research and development of such products, and that these products are properly labeled. Summary We conclude that there are several other interests competing with the influence exerted on consumers by religion. These include the media, environmental activists, scientists and the food industry, all of which function as sources of information and shapers of perception for consumers.

  4. Rising calls for food safety. Radiation technology becomes a timely answer

    International Nuclear Information System (INIS)

    Loaharanu, Paisan

    2001-01-01

    Food safety has become an issue of high priority to many governments. Well publicized cases have shown that an outbreak of a major foodborne disease can have health, political, and economic consequences. Coupled with the increasing interest and publicity by the media, public awareness and concerns about food safety have reached a new height. Issues related to mad cow disease, and genetically modified food have attracted further attention and concern. Awareness of risks involving microbiological contamination of food has increased significantly in the past decade. There have been several major foodborne disease outbreaks caused by various pathogenic bacteria and parasites and widespread coverage by the media. The outbreaks have focused closer attention on food processing technologies to ensure the safety and quality of food. This article reports on developments for the application of irradiation technology for food processing, which has been approved for use in more than 40 countries

  5. Food Insecurity in Nigeria: Way Forward | Otaha | African Research ...

    African Journals Online (AJOL)

    Food security is indispensable prerequisite for the survival of mankind and his economic activities including food production. Food is different from other commodities because of its inevitability for survival and existence. In Nigeria, there is high level of food insecurity for the past four decades as a result of neglect in food ...

  6. Postharvest biology and technology research and development ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-09-03

    Sep 3, 2008 ... The applications of biological control agents in pre- and post-harvest operations and .... production, with regards to food safety, operator health and the ... and to work out sustainable compliance modalities for small-scale ...

  7. Food quality management : a technological and managerial principles and practices

    NARCIS (Netherlands)

    Luning, P.A.; Marcelis, W.J.

    2009-01-01

    This book describes Food Quality Management in one integrated concept. Firstly, all relevant aspects of food quality management are brought into one model, which forms the framework for this book. Secondly, the authors introduce the techno-managerial approach. This approach starts from the idea that

  8. Alternative Food Preservation Techniques, New Technology in Food Preparation and Appropriateness of Food Supply for the Permanently Manned Space Station

    Science.gov (United States)

    Whelan, R. H.

    1985-01-01

    Alternative food preservation techniques are defined as unique processes and combinations of currently used processes for food preservation. Food preservation is the extension of the useful shelf-life of normally perishable foods (from harvest to final consumption) by controlling micro-organisms, enzymes, chemical changes, changes in sensory characteristics and the prevention of subsequent recontamination. The resulting products must comply with all applicable food manufacturing practice regulations and be safe. Most of the foods currently used in both space and military feeding are stabilized either by dehydration or the use of a terminal sterilization process. Other available options would be formulation to reduce water activity, the refrigeration and freezing of perishable foods, chemical addition, and physical treatment (ionizing or nonionizing radiation or mechanical action). These alternatives are considered and proposals made.

  9. Evaluation of research projects Perspectives for applied research in food and agriculture

    DEFF Research Database (Denmark)

    Pedersen, S.M.; Boesen, M.V.; Baker, D.

    2011-01-01

    In this study, the task of evaluating research projects’ relevance and scientific quality is addressed, and a pilot study is executed for five Danish food and agricultural research programmes. Literature reviewed emphasises the importance of context, of consistency and transparency and of the cost...... of evaluation. Moreover, the purpose of research evaluation is thoroughly examined. The method developed and implemented addresses each of these concerns, particularly by employing simple measures and by complementing quantitative analysis with qualitative exercises featuring structured stakeholder interviews...

  10. Jeab at 50: coevolution of research and technology.

    Science.gov (United States)

    Lattal, Kennon A

    2008-01-01

    Evidence of how behavioral research and technology have evolved together abounds in the history of the Journal of the Experimental Analysis of Behavior (JEAB). Technology from outside the discipline (exogenous), from such disciplines as electronics and computer science, has been adapted for use in behavioral research. Technology from within the discipline (endogenous) has developed from both basic behavioral research and existing apparatus. All of these sources of technology have contributed to the corpus of behavioral research as it has evolved in JEAB. Such research, in turn, has provided the environmental pressure necessary for continuing technological evolution both within and outside the discipline. The new technology thus evolved further spurs research along in novel directions. This dynamic coevolutionary interplay between research and technology is an important variable in the past, present, and future of JEAB.

  11. Using a research framework to identify knowledge gaps in research on food marketing to children in Australia.

    Science.gov (United States)

    Chapman, Kathy; Kelly, Bridget; King, Lesley

    2009-06-01

    Research in the field of food marketing to children requires a better understanding of the research gaps in order to inform policy development. The purpose of this paper was to propose a framework for classifying food marketing research, using Australian research on food marketing to children to demonstrate how this framework can be used to determine knowledge gaps. A literature review of research databases and 'grey' material was conducted to identify research from the previous 10 years. Studies were classified according to their research focus, and media type, as either: exposure, including content analyses; effects of exposure, including opinions, attitudes and actions resulting from food marketing exposure; regulations, including the type and level of regulation that applies to food marketing; or breaches of regulations, including instances where marketing regulations have been violated. The majority of Australian research on food marketing to children has focused on television advertising and exposure research. Research has consistently shown that the content of food marketing directed at children is predominately for unhealthy foods. There is a lack of research on the effects of food marketing, which would be valuable to inform policy. The development of a logical framework for food marketing research allows for the identification of research gaps and enables research priorities to be identified.

  12. Food protein-originating peptides as tastants - Physiological, technological, sensory, and bioinformatic approaches.

    Science.gov (United States)

    Iwaniak, Anna; Minkiewicz, Piotr; Darewicz, Małgorzata; Hrynkiewicz, Monika

    2016-11-01

    Taste is one of the factors based on which the organism makes the selection of what to ingest. It also protects humans from ingesting toxic compounds and is one of the main attributes when thinking about food quality. Five basic taste sensations are recognized by humans: bitter, salty, sour, sweet, and umami. The taste of foods is affected by some molecules of some specific chemical nature. One of them are peptides derived from food proteins. Although they are not the major natural compounds originating from food sources that are responsible for the taste, they are in the area of scientific research due to the specific composition of amino acids which are well-known for their sensory properties. Literature data implicate that sweet, bitter, and umami are the tastes attributable to peptides. Moreover, the bitter peptide tastants are the dominant among the other tastes. Additionally, other biological activities like, e.g., inhibiting enzymes that regulate the body functions and acting as preventive food agents of civilization diseases, are also associated with the taste of peptides. The advance in information technologies has contributed to the elaboration of internet archives (databases) as well as in silico tools for the analysis of biological compounds. It also concerns peptides - namely taste carriers originating from foods. Thus, our paper provides a summary of knowledge about peptides as tastants with special attention paid to the following aspects: a) basis of taste perception, b) taste peptides detected in food protein sequences with special emphasis put on the role of bitter peptides, c) peptides that may enhance/suppress the taste of foods, d) databases as well as bioinformatic approaches suitable to study the taste of peptides, e) taste-taste interactions, f) basis of sensory analysis in the evaluation of the taste of molecules, including peptides, and g) the methodology applied to reduce/eliminate the undesired taste of peptides. The list of taste

  13. From food production to food security: developing interdisciplinary, regional-level research

    NARCIS (Netherlands)

    Ingram, J.S.I.

    2011-01-01

    Food security is a condition whereby “all people, at all times, have physical and economic access to sufficient, safe, and nutritious food to meet their dietary needs and food preferences for an active and healthy life” (FAO World Food Summit, 1996). Globally, food production has kept

  14. Risky rays for an improved food supply? National and transnational food irradiation research as a cold war recipe

    Energy Technology Data Exchange (ETDEWEB)

    Zachmann, Karin

    2013-07-01

    This paper has dealt with an innovation that first emerged as a radiation-employing experimental system roughly by the 1930s. Within the context of World War II and especially in the first decade of the Cold War, protagonists of the nuclear establishment (the military, governmental officials such as representatives of US Atomic Energy Commissions and other national agencies, science managers, researchers, and others) became interested in these experimental systems and their elements - e.g., radioisotopes or ionizing rays that were used to explore processes of life - not primarily in their capacity to produce new ways of knowing, but because of their potential to yield new ways of doing. Therefore, these protagonists pushed the experimental systems into the world outside the laboratory at an early stage of their development. What at first emerged out of scientific curiosity to learn how ionizing rays would influence living matter was quickly employed to serve political purposes under the circumstances of the Cold War. This happened when, e.g., ionizing rays of such radiation employing experimental systems were applied to agriculture and food in order to prove that the atom could be put to peaceful use. Such applications of methods and techniques from experimental systems developed into powerful hybrids of science, technology and politics that decisively determined the global distribution of knowledge and control in and beyond the Cold War era. These hybrids still exist, even though the Cold War ended two decades ago. They exist as projects to introduce high-dose irradiation to ready-made food in order to serve the need of food industries and food retailers to increase turnover and profits. So far, only attentive representatives of consumers have challenged these projects via the mobilization of counter-expertise to the food-safety promises of the Joint FAO/IAEA Division and the Codex Alimentarius Commission. The fight over the safety of irradiated food, ironically

  15. Challenges and prospects of food science and technology education: Nepal's perspective

    Science.gov (United States)

    Gartaula, Ghanendra; Adhikari, Bhaskar Mani

    2014-01-01

    Food science and technology education has been running since four decades in Nepal. There is a very slow improvement in the profession. The job opportunities have always been threatened by insiders and outsiders. Academic institutions, government agencies, and food industries themselves are responsible for the quality of food science professionals. Novel and practical methods of teaching should be followed. The government and private organizations should facilitate the recruitment of food technologists. Constant prodding needs to be done for the establishment of a Council with more authority that could monitor all bodies associated with food science professionals. PMID:25493177

  16. Challenges and prospects of food science and technology education: Nepal's perspective.

    Science.gov (United States)

    Gartaula, Ghanendra; Adhikari, Bhaskar Mani

    2014-11-01

    Food science and technology education has been running since four decades in Nepal. There is a very slow improvement in the profession. The job opportunities have always been threatened by insiders and outsiders. Academic institutions, government agencies, and food industries themselves are responsible for the quality of food science professionals. Novel and practical methods of teaching should be followed. The government and private organizations should facilitate the recruitment of food technologists. Constant prodding needs to be done for the establishment of a Council with more authority that could monitor all bodies associated with food science professionals.

  17. Technological Determinism in Educational Technology Research: Some Alternative Ways of Thinking about the Relationship between Learning and Technology

    Science.gov (United States)

    Oliver, M.

    2011-01-01

    This paper argues that research on the educational uses of technology frequently overemphasizes the influence of technology. Research in the field is considered a form of critical perspective, and assumptions about technology are questioned. Technological determinism is introduced, and different positions on this concept are identified. These are…

  18. Experience and Enlightenment of Dutch Agricultural Research and Technology

    NARCIS (Netherlands)

    Liu Zhen, Zhen; Hu, D.

    2011-01-01

    This study analyzes the achievements of agricultural science and technology, the reform of agricultural research system and technology transfer system of agricultural in the Netherlands. With case studies, it tries to find the mode of Dutch agricultural research and technology transfer system, and

  19. "JEAB" at 50: Coevolution of Research and Technology

    Science.gov (United States)

    Lattal, Kennon A.

    2008-01-01

    Evidence of how behavioral research and technology have evolved together abounds in the history of the "Journal of the Experimental Analysis of Behavior" ("JEAB"). Technology from outside the discipline (exogenous) from such disciplines as electronics and computer science has been adapted for use in behavioral research. Technology from within the…

  20. Putting GM technologies to work: public research pipelines in ...

    African Journals Online (AJOL)

    Can public policies and research institutions in African countries provide safe and useful genetically modified (GM) food crops? This is an urgent question, recognizing that advancing GM food crops can be difficult, affected by global debate, and various regulatory protocols. Reaching farmers has been achieved in several ...

  1. Enzyme technology for precision functional food ingredient processes

    DEFF Research Database (Denmark)

    Meyer, Anne S.

    2010-01-01

    modification of potato starch processing residues. Such targeted enzyme-catalyzed reactions provide new invention opportunities for designing functional foods with significant health benefits. The provision of well-defined naturally structured compounds can, moreover, assist in obtaining the much...

  2. Intervention technologies for food safety on minimally processed produce:Perspectives on food-borne and plant pathogens

    Science.gov (United States)

    Produce contamination associated with enteric pathogens such Escherichia coli O157:H7, salmonella spp., Listeria monocytogenes, Shigella and others are significant challenges to food safety. This is due to the illnesses and economic impacts resulting from the outbreaks. Innovative technologies for i...

  3. Food irradiation technology and some implications for New Zealand

    International Nuclear Information System (INIS)

    Roberts, P.B.; Sutton, H.C.

    1986-01-01

    The use of irradiation in the food industry overseas is growing steadily, but it is likely to be several years before New Zealand industry makes extensive use of the process. The design, operation, and likely costs of facilities to provide controlled doses of radiation to foods are reviewed. Different sources of radiation 60 Co, 137 Cs, accelerators, and mobile units) and a variety of package handling methods are discussed. (auths)

  4. Food Technology on the School Curriculum in England: Is It a Curriculum for the Twenty-First Century?

    Science.gov (United States)

    Rutland, Marion; Owen-Jackson, Gwyneth

    2015-01-01

    In England, food technology is part of the curriculum for design and technology but the purpose of food technology education is not clear. Over the years, food on the school curriculum has generally been seen as a practical, learning to cook, activity initially for girls to prepare them for domestic employment or housewifery. As society has…

  5. Practices and exploration on competition of molecular biological detection technology among students in food quality and safety major.

    Science.gov (United States)

    Chang, Yaning; Peng, Yuke; Li, Pengfei; Zhuang, Yingping

    2017-07-08

    With the increasing importance in the application of the molecular biological detection technology in the field of food safety, strengthening education in molecular biology experimental techniques is more necessary for the culture of the students in food quality and safety major. However, molecular biology experiments are not always in curricula of Food quality and safety Majors. This paper introduced a project "competition of molecular biological detection technology for food safety among undergraduate sophomore students in food quality and safety major", students participating in this project needed to learn the fundamental molecular biology experimental techniques such as the principles of molecular biology experiments and genome extraction, PCR and agarose gel electrophoresis analysis, and then design the experiments in groups to identify the meat species in pork and beef products using molecular biological methods. The students should complete the experimental report after basic experiments, write essays and make a presentation after the end of the designed experiments. This project aims to provide another way for food quality and safety majors to improve their knowledge of molecular biology, especially experimental technology, and enhances them to understand the scientific research activities as well as give them a chance to learn how to write a professional thesis. In addition, in line with the principle of an open laboratory, the project is also open to students in other majors in East China University of Science and Technology, in order to enhance students in other majors to understand the fields of molecular biology and food safety. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(4):343-350, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

  6. Understanding and managing the food-energy-water nexus - opportunities for water resources research

    Science.gov (United States)

    Cai, Ximing; Wallington, Kevin; Shafiee-Jood, Majid; Marston, Landon

    2018-01-01

    Studies on the food, energy, and water (FEW) nexus lay a shared foundation for researchers, policy makers, practitioners, and stakeholders to understand and manage linked production, utilization, and security of FEW systems. The FEW nexus paradigm provides the water community specific channels to move forward in interdisciplinary research where integrated water resources management (IWRM) has fallen short. Here, we help water researchers identify, articulate, utilize, and extend our disciplinary strengths within the broader FEW communities, while informing scientists in the food and energy domains about our unique skillset. This paper explores the relevance of existing and ongoing scholarship within the water community, as well as current research needs, for understanding FEW processes and systems and implementing FEW solutions through innovations in technologies, infrastructures, and policies. Following the historical efforts in IWRM, hydrologists, water resources engineers, economists, and policy analysts are provided opportunities for interdisciplinary studies among themselves and in collaboration with energy and food communities, united by a common path to achieve sustainability development goals.

  7. Nuclear technology applied to food preservation and sterilization

    International Nuclear Information System (INIS)

    Galvez, M.

    2011-01-01

    The use of ionizing radiation to conserve and sterilize food dates back to 1995, when the first tests were performed in USA as part of the Atoms for peace program. After much controversy, the most prestigious international organizations- OECD, code Alimentarius, FDA and EC have not only authorized but also recommended its use. It is a proven fact that food irradiation provides optimum results for inhibition treatment of tuber shoots, elimination of insects from fruits and seeds, delaying the maturing processes of fruit and elimination of alternative microorganisms and pathogens in any type of food. Food is treated in two types of plants: 1.- Radioactive isotope plants or gamma radiation plants 2.- electron accelerator plants (beta radiation plants). These two types of plants are thoroughly legislated, as are the form and doses of the treatments. Commercial food irradiation is done in 32 countries in the world but is authorized in more than 40, and the WHO recommends that the method be used on a widespread basis, as it believes that it can help to improve food-related health worldwide. (Author) 5 refs.

  8. Technological Implications of Supply Chain Practices in Agri-Food Sector: A Review

    Directory of Open Access Journals (Sweden)

    Rahul Mor

    2015-08-01

    Full Text Available Today, the global business environment compels enterprises to consider rest of the world in their competitive strategy analysis where firms ignore external factors such as economic trends, competitive positions or technology advancement in other countries. While going truly global with supply chain management, a company develops product in the United States, produce in India and trade in Europe, and they have changed the traditional operation management & logistical activities. This change in trade and the modernization of transport infrastructures have elevated the importance of flow management to new levels. Manufacturers and researchers have noticed many problems concerning supply chain activities, and usually either a system or subcomponent in supply chains is discussed in the literature, but they fails to answer the rational (why, what, how behind them. This paper addresses a review of the principles, bottlenecks and strategies of supply chain practices for organizations with an emphasis on the implications of Indian agri-food sector. Findings of this review reveal that the human & environmental issues, improved product visibility, food safety/quality and the associated economic benefits in sustainable agri-food supply chains can be achieved through innovation, collaboration, elimination of uncertainties and introducing global SCM practices into green & lean initiatives.

  9. Barriers to using consumer science information in food technology innovations: An exploratory study using Delphi methodology

    Directory of Open Access Journals (Sweden)

    Marian E. Raley

    2016-04-01

    Full Text Available Food technology innovation has the potential to deliver many benefits to society, although some technologies have been problematic in terms of public acceptance. In promoting the commercial success of innovative technological processes and resultant products it will be important to incorporate information relating to consumer preferences and concerns during their development. The barriers to the utilisation of consumer information during technological development was explored using a two round Delphi study involving 75 experts with an interest in new food technology (food technologists and consumer scientists. There was overall agreement that consumer information should be used in technology implementation and product design, and that good communication between key actors at pivotal stages during the development of new food technologies and products was important. However disciplinary differences were perceived to be a barrier to communication, as were difficulties associated with producing consumer information usable by food technologists. A strategy to improve inter-disciplinary communication is proposed, involving the creation of multi-disciplinary teams working together throughout the development project’s duration, including those with interdisciplinary experience. Deficiencies in the specification of the information required from consumer scientists need to be overcome. Consumer science results need to be concrete and presented as salient to and usable by food technologists.

  10. Canadian International Food Security Research Fund - Phase II ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The fund was designed to finance initiatives to solve global food and ... food security and enhance nutrition in developing countries; -increase food ... In a context of rising food prices, millions of Africans in marginal areas rely on a range of ...

  11. Technology assessment and social science research on technology

    International Nuclear Information System (INIS)

    Thienen, V. von

    1983-01-01

    In a first step this bibliography wants to overcome the want of systematic scientific data compilations and evaluations of experiences in studies on technology assessment. It concentrates on the social and political aspects of the development of technologies and the decision on their utilization by presenting titles which have been published in English- and German-speaking countries in the past decade. The bibliography is divided into various chapters and subchapters. The index part contains authors' indexes and publishers' indexes, subject indexes, other bibliographies and selected periodicals. (orig.) With 1647 refs [de

  12. Radiation processing of food: a promising technology to ensure food safety and security

    International Nuclear Information System (INIS)

    Gautam, S.

    2016-01-01

    Radiation processing of food involves controlled application of energy from ionizing radiations. Approved sources of radiation for food processing are radioisotopes (Cobalt-60 and Caesium-137), electron beam (up to 10 MeV) and X-rays (up to 5 MeV). Radiation processing of food is carried out in an irradiation chamber shielded by 1.5 - 1.8 m thick concrete walls. Food, either pre-packed or in-bulk, placed in suitable containers is sent into the irradiation chamber with the help of an automatic conveyor. Major benefits achieved by radiation processing of food are: (i) inhibition of sprouting of tubers and bulbs; (ii) disinfestations of insect pests in agricultural commodities; (iii) delay in ripening and senescence of fruits and vegetables; (iv) destruction of microbes responsible for spoilage, and (v) elimination of pathogens and parasites of public health importance. Irradiation produces very little chemical changes in food. The majority of changes are similar to those by other preservation methods like heat. The radiolytic products and free radicals produced are identical to those present in foods subjected to treatment such as cooking and canning. None of the changes known to occur have been found to be harmful. Twelve food irradiation plants have been commissioned till date in the private sector in India. Two plants set by Government of India (Radiation Processing Plant, Vashi, Navi Mumbai; and KRUSHAK, Lasalgaon, Nashik) are also operational. Volume of food irradiated in India has been steadily increasing. Recent development in the area of food irradiation in India include harmonization of food irradiation rules with international regulation

  13. Emerging Education Technologies and Research Directions

    Science.gov (United States)

    Spector, J. Michael

    2013-01-01

    Two recent publications report the emerging technologies that are likely to have a significant impact on learning and instruction: (a) New Media Consortium's "2011 Horizon Report" (Johnson, Smith, Willis, Levine & Haywood, 2011), and (b) "A Roadmap for Education Technology" funded by the National Science Foundation in…

  14. Nigerian Journal of Technological Research: Contact

    African Journals Online (AJOL)

    Principal Contact. Prof. OOA Fasanya Editor-in-Chief Federal University of Technology, Minna, Niger State, Nigeria Journal Office, Federal University of Technology, P.M.B. 65, Minna, Niger State, Nigeria Phone: +234 81313 45053. Email: njtrfutminna@gmail.com ...

  15. Technology and Meteorology. An Action Research Paper.

    Science.gov (United States)

    Taggart, Raymond F.

    Meteorology, the science of weather and weather conditions, has traditionally been taught via textbook and rote demonstration. This study was intended to determine to what degree utilizing technology in the study of meteorology improves students' attitudes towards science and to measure to what extent technology in meteorology increases…

  16. Trends and Research Issues in Educational Technology

    Science.gov (United States)

    Spector, J. Michael

    2013-01-01

    If one looks back at the last 50 years or so at educational technologies, one will notice several things. First, the pace of innovation has increased dramatically with many developments in the application of digital technologies to learning and instruction, following by a few years developments in the sciences and engineering disciplines that are…

  17. Exploring health information technology education: an analysis of the research.

    Science.gov (United States)

    Virgona, Thomas

    2012-01-01

    This article is an analysis of the Health Information Technology Education published research. The purpose of this study was to examine selected literature using variables such as journal frequency, keyword analysis, universities associated with the research and geographic diversity. The analysis presented in this paper has identified intellectually significant studies that have contributed to the development and accumulation of intellectual wealth of Health Information Technology. The keyword analysis suggests that Health Information Technology research has evolved from establishing concepts and domains of health information systems, technology and management to contemporary issues such as education, outsourcing, web services and security. The research findings have implications for educators, researchers, journal.

  18. Science and Technology Research for Sustainable Development in ...

    African Journals Online (AJOL)

    FIRST LADY

    A fundamental need for development of science, technology, research and national ... that encourages partnership for exchange of people, ideas, and support facilities. .... ii Imagination to apply existing technology to new problems or.

  19. Science and Technology Research for Sustainable Development in ...

    African Journals Online (AJOL)

    Science and Technology Research for Sustainable Development in Africa: The Imperative ... This has placed African countries at a disadvantage. ... In this paper, effort is made to establish the imperative of education to science and technology.

  20. Development of advanced technology for stable support of Korean style space foods by the collaboration with an industry

    International Nuclear Information System (INIS)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Suk; Choi, Jong Il; Park, Jin Kyu; Park, Jae Nam

    2007-06-01

    Keeping pace with the space era of 21 century, Korea gets an opportunity to participate in a project in which the manned spaceship and the international space station will be developed. The Korean astronaut program is so the first step to open a new field of space development project that needs many researches and experiments to implement the mission successfully. Because food is an important part of life, it is imperative that the space food system is the best it can be. The supply of food must be nourishing and tasty so astronauts maintain their health during their important stays in space. Therefore, this study was conducted to develop space foods maintaining microbial safety and sensory characteristics, and the objective is to produce basic information about the processing technology of space foods. The results showed that combination treatment of radiation technology might be helpful for extending the space foods such as space Kimchi. And the development of a new herbal preparation (HemoHIM) for immune and hematopoiesis modulation as well as oxidative damage inhibition in space environment might be helpful for improving the astronaut's health