Elevator mechanism and method for scintillation detectors

International Nuclear Information System (INIS)

Frank, E.

1975-01-01

An elevator mechanism and method for raising and lowering radioactive samples through a shielded vertical counting chamber in a benchtop scintillation detector is described. The elevator mechanism adds little or nothing to the height of the detector by using an elongated flexible member such as a metal tape secured to the bottom of the elevator platform and extending downwardly through the counting chamber and its bottom shielding, where the tape is bent laterally for connection to a drive means. In the particular embodiment illustrated, the tape is bent laterally below the bottom shielding for the counting chamber, and then upwardly along or through one side of the shielding to a reel at the top of the shielding. The tape is wound onto the reel, and the reel is driven by a reversible motor which winds and unwinds the tape on the reel to raise and lower the elevator platform

The Frame of Fixed Stars in Relational Mechanics

Science.gov (United States)

Ferraro, Rafael

2017-01-01

Relational mechanics is a gauge theory of classical mechanics whose laws do not govern the motion of individual particles but the evolution of the distances between particles. Its formulation gives a satisfactory answer to Leibniz's and Mach's criticisms of Newton's mechanics: relational mechanics does not rely on the idea of an absolute space. When describing the behavior of small subsystems with respect to the so called "fixed stars", relational mechanics basically agrees with Newtonian mechanics. However, those subsystems having huge angular momentum will deviate from the Newtonian behavior if they are described in the frame of fixed stars. Such subsystems naturally belong to the field of astronomy; they can be used to test the relational theory.

The use of the Podotrack in forensic podiatry for collection and analysis of bare footprints using the Reel method of measurement.

Science.gov (United States)

Burrow, J Gordon

2016-05-01

This small-scale study examined the role that bare footprint collection and measurement processes have on the Reel method of measurement in forensic podiatry and its use in the Criminal Justice System. Previous research indicated that the Reel method was a valid and reliable measurement system for bare footprint analysis but various collection systems have been used to collect footprint data and both manual and digital measurement processes were utilized in forensic podiatry and other disciplines. This study contributes to the debate about collecting bare footprints; the techniques employed to quantify various Reel measurements and considered whether there was asymmetry between feet and footprints of the same person. An inductive, quantitative paradigm used the Podotrack gathering procedure for footprint collection and the subsequent dynamic footprints subjected to Adobe Photoshop techniques of calculating the Reel linear variables. Statistical analyses using paired-sample t tests were conducted to test hypotheses and compare data sets. Standard error of mean (SEM) showed variation between feet and the findings provide support for the Reel study and measurement method. Copyright © 2016 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

Deployable structures using bistable reeled composites

Science.gov (United States)

Daton-Lovett, Andrew J.; Compton-Bishop, Quentin M.; Curry, Richard G.

2000-06-01

This paper describes an innovative, patented use of composite materials developed by RolaTube Technology Ltd. to make smart deployable structures. Bi-stable reeled composites (BRCs) can alternate between two stable forms; that of a strong, rigid structure and that of a compact coil of flat-wound material. Bi-stability arises as a result of the manipulation of Poisson's ratio and isotropy in the various layers of the material. BRCs are made of fiber- reinforced composite materials, most often with a thermoplastic matrix. A range of fibers and polymer matrices can be used according to the requirements of the operating environment. Samples of a BRC structure were constructed using layers of unidirectional, fiber-reinforced thermoplastic sheet with the layers at different angles. The whole assembly was then consolidated under conditions of elevated temperature and pressure. The properties of the BRC are described and the result of a series of experiments performed on the sample to determine the tensile strength of the BRC structure are reported. A full analysis using finite element methods is being undertaken in collaboration with the University of Cambridge, England. The first commercial use has been to fabricate boom and drive mechanisms for the remote inspection of industrial plant.

Siim Nestor soovitab : Reel People. Selffish. Xploding Plastix / Siim Nestor

Index Scriptorium Estoniae

Nestor, Siim, 1974-

2005-01-01

Popmuusika üritustest: briti ansambel Reel People ja ansambel Hinkus 28. apr. Rock Café's Tallinnas Jazzkaare raames, läti diskor ja produtsent Andrew Eigus (Selffish) koos eesti diskoritega 29. apr. peol Pirita jõe suudmes laeval Monica, norra duo Xpoding Plastix ja ansambel Kismabande 29. apr. Sakala keskuse suures saalis Jazzkaare raames

Thread-Like CMOS Logic Circuits Enabled by Reel-Processed Single-Walled Carbon Nanotube Transistors via Selective Doping.

Science.gov (United States)

Heo, Jae Sang; Kim, Taehoon; Ban, Seok-Gyu; Kim, Daesik; Lee, Jun Ho; Jur, Jesse S; Kim, Myung-Gil; Kim, Yong-Hoon; Hong, Yongtaek; Park, Sung Kyu

2017-08-01

The realization of large-area electronics with full integration of 1D thread-like devices may open up a new era for ultraflexible and human adaptable electronic systems because of their potential advantages in demonstrating scalable complex circuitry by a simply integrated weaving technology. More importantly, the thread-like fiber electronic devices can be achieved using a simple reel-to-reel process, which is strongly required for low-cost and scalable manufacturing technology. Here, high-performance reel-processed complementary metal-oxide-semiconductor (CMOS) integrated circuits are reported on 1D fiber substrates by using selectively chemical-doped single-walled carbon nanotube (SWCNT) transistors. With the introduction of selective n-type doping and a nonrelief photochemical patterning process, p- and n-type SWCNT transistors are successfully implemented on cylindrical fiber substrates under air ambient, enabling high-performance and reliable thread-like CMOS inverter circuits. In addition, it is noteworthy that the optimized reel-coating process can facilitate improvement in the arrangement of SWCNTs, building uniformly well-aligned SWCNT channels, and enhancement of the electrical performance of the devices. The p- and n-type SWCNT transistors exhibit field-effect mobility of 4.03 and 2.15 cm 2 V -1 s -1 , respectively, with relatively narrow distribution. Moreover, the SWCNT CMOS inverter circuits demonstrate a gain of 6.76 and relatively good dynamic operation at a supply voltage of 5.0 V. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design of small diameter HT/HP sour service reeled rigid pipelines

Energy Technology Data Exchange (ETDEWEB)

Carneiro, Daniel; Gouveia, Joao; Tardelli, Luciano [Tecnitas, Rio de Janeiro, RJ (Brazil)], e-mail: daniel.carneiro@br.bureauveritas.com; Parrilha, Rafael [Bureau Veritas Group, London (United Kingdom); Oazen, Eduardo; Cardoso, Carlos [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2009-12-19

The paper presents an overview of the challenges overcome in the engineering design of two 219 mm diameter, 6 km length oil production pipelines, to be installed by reeling at Espirito Santo Basin, offshore Brazilian coast in 1500 m water depth. The high temperature and high pressure (HT/HP) operating conditions and sour content associated with the small diameter required to single well oil production would usually lead to flexible flow line solution in Brazilian fields. The decision of employing small diameter thick-walled rigid C-Mn steel pipelines with thick thermal insulation made necessary extensive engineering work to achieve a safe and robust thermal expansion control arrangement, including the design of walking mitigation and buckle initiation apparatus; a feasible weld acceptance criterion covering both high cycle fatigue due to pipe lay and vortex induced vibration (VIV) at free spans, and high strain low cycle fatigue and fracture growth induced by reeling installation and in-service lateral buckling. Several studies were performed using highly non-linear three-dimensional finite element models considering: pipe-soil interaction with full 3D seabed bathymetry; load history maintained from pipe lay to operational cycles, including temperature transient effects; high plastic strains (including steel properties de-rating due to high temperature) and section ovalization; mechanical contact between pipe and appurtenances during both installation and operational phases. Pipe-soil interaction comprised embedment considering dynamic effects of pipe lay and full non-linear lateral and axial response curves including break-out and residual resistance. Strain concentration factors due to field joints were evaluated using detailed solid models considering non-linear response of both steel and insulation materials. Susceptibility to VIV at free spans was assessed considering post loaded deformed span natural frequencies, including multi-span interaction effects and

NGOs and gender policy: some issues from the south Indian silk-reeling industry.

Science.gov (United States)

Mayoux, L

1993-10-01

In India, silk reeling, the middle stage in silk production, is potentially very profitable, and the silk industry has been required to adopt gender-aware policies such as appointing female staff and introducing gender sensitization training. To date, policies designed to encourage women's entrepreneurship in the reeling industry have been unsuccessful. Men have appropriated credit issued in women's names, and no women's cooperatives are currently in operation. The policies designed to encourage female entrepreneurship in reeling woefully overlooked the complexity of this work which involves a substantial investment of capital and significant risk. Women and girls continue to work as unpaid family workers and wage laborers without the benefits of governmental policies to protect their interests. In fact, attempts to introduce labor legislation to protect women have been blocked on the national level by the powerful Reelers' Association. Policies which address gender issues in the family and in the wider context of the silk industry are also lacking, and there is a wide variation in how women are able or unable to manipulate their positions to their advantage. Women's inabilities are the root cause of their inability to become entrepreneurs and improve their labor status. Nongovernmental organizations can enhance entrepreneurship and cooperative development by improving training in all aspects of running a business and in group formation. Women laborers must organize to improve wages and working conditions, and women must be able to increase their control over income and resources and their access to the outside world even as they decrease the time spent on unpaid reproductive labor.

Development of a coupled tendon-driven 3D multi-joint manipulator. Investigation of tension transfer efficiency, optimal reel arrangement and tip positioning accuracy

International Nuclear Information System (INIS)

Horigome, Atsushi; Yamada, Hiroya; Hirose, Shigeo; Sen, Shin; Endo, Gen

2017-01-01

Long-reach robotic manipulators are expected to be used in the space where humans cannot work such as nuclear power plant disaster areas. We suggested a coupled tendon-driven articulated manipulator '3D CT-Arm' and developed a preliminary prototype 'Mini 3D CT-Arm' whose arm had 2.4 m length and 0.3 m width. In order to consider developing '3D CT-Arm' deeply, we discussed tension transfer efficiency of a tendon through pulleys, the arrangement of the maximum number of reels in a limited space and the tip positioning accuracy. Through many transfer efficiency experiments, we conclude that tension transfer efficiency of '3D CT-Arm' can reach over 88% in the worst case. We investigated non-interfering reels' arrangement in the base by full search in cases of up to 10 reels. In all simulations, V-shaped or W-shaped arrangement can support the most reels in a limited space. Therefore, we conclude this is the most optimal reels' arrangement. Finally, we carried out the positioning accuracy experiment with 'Mini 3D CT-Arm' via motion capture system. Although the tip position had a 2 to 41 mm error between the desired value and the measured value by potentiometer, a 29 to 95 mm error between the desired value and the measured value was measured by motion capture system. (author)

Tape transport mechanism

International Nuclear Information System (INIS)

Groh, E.F.; McDowell, W.; Modjeski, N.S.; Keefe, D.J.; Groer, P.

1979-01-01

A device is provided for transporting, in a stepwise manner, tape between a feed reel and takeup reel. An indexer moves across the normal path of the tape displacing it while the tape on the takeup reel side of the indexer is braked. After displacement, the takeup reel takes up the displaced tape while the tape on the feed reel side of the indexer is braked, providing stepwise tape transport in precise intervals determined by the amount of displacement caused by the indexer

Technology intervention to improve the energy efficiency and productivity of silk reeling sector

International Nuclear Information System (INIS)

Dhingra, Sunil; Mande, Sanjay; Raman, P.; Srinivas, S.N.; Kishore, V.V.N.

2004-01-01

The Energy and Resources Institute (TERI) has been actively involved in development of biomass gasifier system for thermal and power generation use. Though the basic science of gasification is well established, there have not many efforts in the past on product development. By continuous interaction with users, silk experts and consultants, TERI could able to develop a gasifier based silk reeling oven. A major thrust on this development work was to evolve marketable product by continued efforts to gain an insight of the actual process and user feedback through an extended presence and interaction at field level, and then translating this experience in product design. The present paper gives a summary of design, development and testing of gasifier based cottage basin system for cocoon cooking in silk reeling industry in order to achieve higher fuel efficiency and increase productivity of the process. The paper describes in detail the approach of different technology development stages, its testing both at laboratory and field and economic viability of the system

Slot Machines: Pursuing Responsible Gaming Practices for Virtual Reels and Near Misses

Science.gov (United States)

Harrigan, Kevin A.

2009-01-01

Since 1983, slot machines in North America have used a computer and virtual reels to determine the odds. Since at least 1988, a technique called clustering has been used to create a high number of near misses, failures that are close to wins. The result is that what the player sees does not represent the underlying probabilities and randomness,…

A study on fixing force generation mechanism of ER gel

International Nuclear Information System (INIS)

Tanaka, H; Kakinuma, Y; Aoyama, T; Anzai, H

2009-01-01

Electro-rheological Gel (ERG) is a new functional elastomer which changes its surface frictional and adhesive property according to the intensity of applied electrical field. This unique property is called ERG effect. The upper sliding electrode placed on the surface of ERG is fixed by the adhesive effect of ERG under electrical field. Variable fixing forces due to adhesion are generated by this effect. However, relationship between physical factors and generated fixing force has not yet been clarified. In this study, physical mechanism of fixing phenomenon is elucidated experimentally from the view point of frictional force and adhesive force. From the results, empirical equation of generated fixing force is originally derived to establish the theory of ERG effect.

A study on fixing force generation mechanism of ER gel

Energy Technology Data Exchange (ETDEWEB)

Tanaka, H; Kakinuma, Y; Aoyama, T [School of Integrated Design Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan); Anzai, H [Fujikura kasei Co., Ltd., 2-6-15 Shibakouen, Minato-ku, Tokyo (Japan)], E-mail: h-tanaka@ina.sd.keio.ac.jp

2009-02-01

Electro-rheological Gel (ERG) is a new functional elastomer which changes its surface frictional and adhesive property according to the intensity of applied electrical field. This unique property is called ERG effect. The upper sliding electrode placed on the surface of ERG is fixed by the adhesive effect of ERG under electrical field. Variable fixing forces due to adhesion are generated by this effect. However, relationship between physical factors and generated fixing force has not yet been clarified. In this study, physical mechanism of fixing phenomenon is elucidated experimentally from the view point of frictional force and adhesive force. From the results, empirical equation of generated fixing force is originally derived to establish the theory of ERG effect.

78 FR 60018 - Requested Administrative Waiver of the Coastwise Trade Laws: Vessel HOOKED FOR REEL; Invitation...

Science.gov (United States)

2013-09-30

... entered into this docket is available on the World Wide Web at http://www.regulations.gov . FOR FURTHER... HOOKED FOR REEL is: INTENDED COMMERCIAL USE OF VESSEL: Sport fishing charters GEOGRAPHIC REGION: Michigan...

Automated installations for reeling up of superconducting magnet windings of the accelerating-storage complex

International Nuclear Information System (INIS)

Dolzhenkov, V.I.; Elistratov, V.V.; Kuznetsov, Yu.V.; Petrov, V.B.; Popov, V.V.; Savel'ev, A.V.; Sokolov, B.V.; Sytnik, V.V.; Tarakanov, N.M.; Ustinov, E.A.

1992-01-01

An automated facility for reeling up the windings of model and full-scale superconducting magnets of the accelerating-storage complex is described. The control system monitors superconducting cable tension, transport carriage linear velocity and some other parameters. Maximum length of the winded coils is 6 m. Cable tension stability - 5%

76 FR 70216 - Requested Administrative Waiver of the Coastwise Trade Laws; Vessel REEL ATTITUDE; Invitation for...

Science.gov (United States)

2011-11-10

... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket No. MARAD-2011 0146] Requested Administrative Waiver of the Coastwise Trade Laws; Vessel REEL ATTITUDE; Invitation for Public Comments AGENCY... ATTITUDE is: Intended Commercial Use of Vessel: ``Fishing Charter passenger less than 6.'' Geographic...

Reproduction of European Eel in Aquaculture (REEL)

DEFF Research Database (Denmark)

Tomkiewicz, Jonna; Tybjerg, Lars; Støttrup, Josianne

for the development of methods to reproduce European eel in aquaculture. Two major projects: Artificial Reproduction of Eels II and III (ROE II and III) succeeded during 2005-2008 to produce viable eggs and larvae that lived up to 12 days. The larvae thereby accomplished the yolk-sac stage and became ready to start...... feeding. The results were in particular promising because they evidenced that methods successfully applied to Japanese eel has a potential for application also to the European eel. ROE II and III were supported by the Ministry of Food, Agriculture and Fisheries and the European Commission through...... the Financial Instrument for Fisheries Guidance (FIFG) and the Danish Food Research Program 2006, respectively. Results: The REEL project accomplished through three series of experiments to consolidate previous results. The longevity of larvae was extended from 12 to 20 days after hatch in first feeding...

Accuracy synthesis of T-shaped exit fixed mechanism in a double-crystal monochromator

International Nuclear Information System (INIS)

Wang Fengqin; Cao Chongzhen; Wang Jidai; Li Yushan; Gao Xueguan

2007-01-01

It is a key performance requirement for a double-crystal monochromator that the exit is fixed, and in order to improve the height accuracy of the exit in T-shaped exit fixed mechanism, the expression between the height of the exit and various original errors was put forward using geometrical analysis method. According to the independent action principle of original errors, accuracy synthesis of T-shaped exit fixed mechanism was studied by using the equal accuracy method, and the tolerance ranges of original errors were obtained. How to calculate the tolerance ranges of original errors was explained by giving an example. (authors)

Reel news in the digital age: Framing Britain’s radical video-activists

OpenAIRE

Presence, S.

2016-01-01

The most recent book-length study of radical British filmmaking, Margaret Dickinson’s Rogue Reels: Oppositional Film in Britain, 1945-90 (1999), ends by noting the emergence Undercurrents in 1994 as an example of the burgeoning use of video as a propaganda tool. Indeed, Undercurrents went on to become one of the most established British video-activist groups in the 1990s, among others such as Despite TV and Conscious Cinema. \\ud \\ud However, while Undercurrents remain a key part of contempora...

A Hybrid Dynamic Programming for Solving Fixed Cost Transportation with Discounted Mechanism

OpenAIRE

Farhad Ghassemi Tari

2016-01-01

The problem of allocating different types of vehicles for transporting a set of products from a manufacturer to its depots/cross docks, in an existing transportation network, to minimize the total transportation costs, is considered. The distribution network involves a heterogeneous fleet of vehicles, with a variable transportation cost and a fixed cost in which a discount mechanism is applied on the fixed part of the transportation costs. It is assumed that the number of available vehicles i...

Mechanical Behaviour of Lined Pipe

NARCIS (Netherlands)

Hilberink, A.

2011-01-01

Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

Review of the inverse scattering problem at fixed energy in quantum mechanics

Science.gov (United States)

Sabatier, P. C.

1972-01-01

Methods of solution of the inverse scattering problem at fixed energy in quantum mechanics are presented. Scattering experiments of a beam of particles at a nonrelativisitic energy by a target made up of particles are analyzed. The Schroedinger equation is used to develop the quantum mechanical description of the system and one of several functions depending on the relative distance of the particles. The inverse problem is the construction of the potentials from experimental measurements.

Two-Stage Winch for Kites and Tethered Balloons or Blimps

Science.gov (United States)

Miles, Ted; Bland, Geoff

2011-01-01

A winch system provides a method for launch and recovery capabilities for kites and tethered blimps or balloons. Low power consumption is a key objective, as well as low weight for portability. This is accomplished by decoupling the tether-line storage and wind ing/ unwinding functions, and providing tailored and efficient mechanisms for each. The components of this system include rotational power input devices such as electric motors or other apparatus, line winding/unwinding reel(s), line storage reel(s), and independent drive trains. Power is applied to the wind/unwind reels to transport the tether line. Power is also applied to a line storage reel, from either the wind/unwind power source, the wind/unwind reel itself, or separate power source. The speeds of the two reels are synchronized, but not dependent on each other. This is accomplished via clutch mechanisms, variable transmissions, or independent motor controls. The speed of the storage reel is modulated as the effective diameter of the reel changes with line accumulation.

The Credit-Risk Decision Mechanism on Fixed Loan Interest Rate with Imperfect Information

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

In this paper, decision mechanism of credit-risk for banks is studied when the loan interest rate is fixed with asymmetry information in credit market. We give out the designs of rationing and non-rationing on credit risky decision mechanism when collateral value provided by an entrepreneur is not less than the minimum demands of the bank. It shows that under the action of the mechanism, banks could efficiently identify the risk size of the project. Finally, the condition of the project investigation of bank is given over again.

Gauge fixings, evolution generators and world-line conditions in relativistic classical mechanics with constraints

International Nuclear Information System (INIS)

Lusanna, L.

1981-01-01

After a review of the main models for classical relativistic N-particle systems based upon Dirac's theory of constraints, a detailed study of their Hamiltonian formulation is made. The choice of the arbitrary functions and of the gauge-fixing constraints and the associated realizations of the reduced phase-space and of the observables by means of Dirac brackets are examined in detail. The restrictions on the gauge fixings to obtain compatibility between the evolution in the reduced phase space, generated by the total energy of the system, and the one in the constraint hypersurface, generated by the Dirac Hamiltonian, are found. It is also demonstrated that these restrictions are nothing else than the world-line conditions, i.e. gauge transformations are needed to ensure the objective existence of the world-lines and manifest covariance is broken. This is due to the property of the Dirac brackets of preserving the gauge fixings in every frame of reference. Predictive mechanics and the Currie-Hill world-line conditions are not in contradiction with the previous results: avoiding the Dirac-bracket mechanism, they save the manifest covariance but at the price of using accelerations which are complicated functions of the original potentials depending upon the whole history of the system. (author)

Wall shear stress fixed points in cardiovascular fluid mechanics.

Science.gov (United States)

Arzani, Amirhossein; Shadden, Shawn C

2018-05-17

Complex blood flow in large arteries creates rich wall shear stress (WSS) vectorial features. WSS acts as a link between blood flow dynamics and the biology of various cardiovascular diseases. WSS has been of great interest in a wide range of studies and has been the most popular measure to correlate blood flow to cardiovascular disease. Recent studies have emphasized different vectorial features of WSS. However, fixed points in the WSS vector field have not received much attention. A WSS fixed point is a point on the vessel wall where the WSS vector vanishes. In this article, WSS fixed points are classified and the aspects by which they could influence cardiovascular disease are reviewed. First, the connection between WSS fixed points and the flow topology away from the vessel wall is discussed. Second, the potential role of time-averaged WSS fixed points in biochemical mass transport is demonstrated using the recent concept of Lagrangian WSS structures. Finally, simple measures are proposed to quantify the exposure of the endothelial cells to WSS fixed points. Examples from various arterial flow applications are demonstrated. Copyright © 2018 Elsevier Ltd. All rights reserved.

A Cheap Linear Attention Mechanism with Fast Lookups and Fixed-Size Representations

OpenAIRE

de Brébisson, Alexandre; Vincent, Pascal

2016-01-01

The softmax content-based attention mechanism has proven to be very beneficial in many applications of recurrent neural networks. Nevertheless it suffers from two major computational limitations. First, its computations for an attention lookup scale linearly in the size of the attended sequence. Second, it does not encode the sequence into a fixed-size representation but instead requires to memorize all the hidden states. These two limitations restrict the use of the softmax attention mechani...

A Hybrid Dynamic Programming for Solving Fixed Cost Transportation with Discounted Mechanism

Directory of Open Access Journals (Sweden)

Farhad Ghassemi Tari

2016-01-01

Full Text Available The problem of allocating different types of vehicles for transporting a set of products from a manufacturer to its depots/cross docks, in an existing transportation network, to minimize the total transportation costs, is considered. The distribution network involves a heterogeneous fleet of vehicles, with a variable transportation cost and a fixed cost in which a discount mechanism is applied on the fixed part of the transportation costs. It is assumed that the number of available vehicles is limited for some types. A mathematical programming model in the form of the discrete nonlinear optimization model is proposed. A hybrid dynamic programming algorithm is developed for finding the optimal solution. To increase the computational efficiency of the solution algorithm, several concepts and routines, such as the imbedded state routine, surrogate constraint concept, and bounding schemes, are incorporated in the dynamic programming algorithm. A real world case problem is selected and solved by the proposed solution algorithm, and the optimal solution is obtained.

Continuous depth-sensing nano-mechanical characterization of living, fixed and dehydrated cells attached on a glass substrate

Energy Technology Data Exchange (ETDEWEB)

Yang, Yun-Ta; Liao, Jiunn-Der; Chang, Chia-Wei [Department of Materials Science and Engineering, National Cheng Kung University, No. 1, University Road, Tainan 70101, Taiwan (China); Lin, Chou-Ching K [Department of Neurology, National Cheng Kung University, No. 1, University Road, Tainan 70101, Taiwan (China); Ju, Ming-Shaung, E-mail: jdliao@mail.ncku.edu.tw [Department of Mechanical Engineering, National Cheng Kung University, No. 1, University Road, Tainan 70101, Taiwan (China)

2010-07-16

Continuous depth-sensing nano-indentation on living, fixed and dehydrated fibroblast cells was performed using a dynamic contact module and vertically measured from a pre-contact state to the glass substrate. The nano-indentation tip-on-cell approaches took advantage of finding a contact surface, followed by obtaining a continuous nano-mechanical profile along the nano-indentation depths. In the experiment, serial indentations from the leading edge, i.e., the lamellipodium to nucleus regions of living, fixed and dehydrated fibroblast cells were examined. Nano-indentations on a living cell anchored upon glass substrate were competent in finding the tip-on-cell contact surfaces and cell heights. For the result on the fixed and the dehydrated cells, cellular nano-mechanical properties were clearly characterized by continuous harmonic contact stiffness (HCS) measurements. The relations of HCS versus measured displacement, varied from the initial tip-on-cell contact to the glass substrate, were presumably divided into three stages, respectively induced by cellular intrinsic behavior, the substrate-dominant property, and the substrate property. This manifestation is beneficial to elucidate how the underlying substrate influences the interpretation of the nano-mechanical property of thin soft matter on a hard substrate. These findings, based upon continuous depth-sensing nano-indentations, are presumably valuable as a reference to related work, e.g., accomplished by atomic force microscopy.

Continuous depth-sensing nano-mechanical characterization of living, fixed and dehydrated cells attached on a glass substrate

International Nuclear Information System (INIS)

Yang, Yun-Ta; Liao, Jiunn-Der; Chang, Chia-Wei; Lin, Chou-Ching K; Ju, Ming-Shaung

2010-01-01

Continuous depth-sensing nano-indentation on living, fixed and dehydrated fibroblast cells was performed using a dynamic contact module and vertically measured from a pre-contact state to the glass substrate. The nano-indentation tip-on-cell approaches took advantage of finding a contact surface, followed by obtaining a continuous nano-mechanical profile along the nano-indentation depths. In the experiment, serial indentations from the leading edge, i.e., the lamellipodium to nucleus regions of living, fixed and dehydrated fibroblast cells were examined. Nano-indentations on a living cell anchored upon glass substrate were competent in finding the tip-on-cell contact surfaces and cell heights. For the result on the fixed and the dehydrated cells, cellular nano-mechanical properties were clearly characterized by continuous harmonic contact stiffness (HCS) measurements. The relations of HCS versus measured displacement, varied from the initial tip-on-cell contact to the glass substrate, were presumably divided into three stages, respectively induced by cellular intrinsic behavior, the substrate-dominant property, and the substrate property. This manifestation is beneficial to elucidate how the underlying substrate influences the interpretation of the nano-mechanical property of thin soft matter on a hard substrate. These findings, based upon continuous depth-sensing nano-indentations, are presumably valuable as a reference to related work, e.g., accomplished by atomic force microscopy.

Mechanisms in ancient Chinese books with illustrations

CERN Document Server

Hsiao, Kuo-Hung

2014-01-01

This book presents a unique approach for studying mechanisms and machines with drawings that were depicted unclearly in ancient Chinese books. The historical, cultural and technical backgrounds of the mechanisms are explained, and various mechanisms described and illustrated in ancient books are introduced. By utilizing the idea for the conceptual design of modern mechanisms, all feasible designs of ancient mechanisms with uncertain members and joints that meet the technical standards of the subjects’ time periods are synthesized systematically. Ancient Chinese crossbows (the original crossbow and repeating crossbows), textile mechanisms (silk-reeling mechanism, spinning mechanisms, and looms), and many other artisan's tool mechanisms are used as illustrated examples.  Such an approach provides a logical method for the reconstruction designs of ancient mechanisms with uncertain structures. It also provides an innovative direction for researchers to further identify the original structures of mechanisms...

Structure and mechanical properties of Cresco-Ti laser-welded joints and stress analyses using finite element models of fixed distal extension and fixed partial prosthetic designs.

Science.gov (United States)

Uysal, Hakan; Kurtoglu, Cem; Gurbuz, Riza; Tutuncu, Naki

2005-03-01

The Cresco-Ti System uses a laser-welded process that provides an efficient technique to achieve passive fit frameworks. However, mechanical behavior of the laser-welded joint under biomechanical stress factors has not been demonstrated. This study describes the effect of Cresco-Ti laser-welding conditions on the material properties of the welded specimen and analyzes stresses on the weld joint through 3-dimensional finite element models (3-D FEM) of implant-supported fixed dentures with cantilever extensions and fixed partial denture designs. Twenty Grade III (ASTM B348) commercially pure titanium specimens were machine-milled to the dimensions described in the EN10002-1 tensile test standard and divided into test (n = 10) and control (n = 10) groups. The test specimens were sectioned and laser-welded. All specimens were subjected to tensile testing to determine yield strength (YS), ultimate tensile strength (UTS), and percent elongation (PE). The Knoop micro-indentation test was performed to determine the hardness of all specimens. On welded specimens, the hardness test was performed at the welded surface. Data were analyzed with the Mann-Whitney U test and Student's t test (alpha=.05). Fracture surfaces were examined by scanning electron microscopy to characterize the mode of fracture and identify defects due to welding. Three-dimensional FEMs were created that simulated a fixed denture with cantilever extensions supported by 5 implants (M1) and a fixed partial denture supported by 2 implants (M2), 1 of which was angled 30 degrees mesio-axially. An oblique load of 400 N with 15 degrees lingual-axial inclinations was applied to both models at various locations. Test specimens fractured between the weld and the parent material. No porosities were observed on the fractured surfaces. Mean values for YS, UTS, PE, and Knoop hardness were 428 +/- 88 MPa, 574 +/- 113 MPa, 11.2 +/- 0.4%, 270 +/- 17 KHN, respectively, for the control group and 642 +/- 2 MPa, 772 +/- 72

Investigation of Jc-Suppressing Factors in Flat-Rolled Sr0.6K0.4Fe2As2Fe Tapes Via Microstructure Analysis

KAUST Repository

Zhang, Xianping; Wang, Qingxiao; Li, Kun; Cai, Yao; Jiang, Fuguo; Wang, Zhen; Li, Jianqi; Yao, Chao; Lin, He; Zhang, Qianjun; Dong, Chiheng; Wang, Dongliang; Zhang, Xixiang; Ma, Yanwei

2015-01-01

Pnictide superconductors will be very promising for applications if wires with high critical current density Jc can allow reel-to-reel large-scale fabrication at low costs. To understand the mechanism(s) that limited Jc in flat-rolled Sr0.6K0.4Fe2As

Least fixed points revisited

NARCIS (Netherlands)

J.W. de Bakker (Jaco)

1975-01-01

textabstractParameter mechanisms for recursive procedures are investigated. Contrary to the view of Manna et al., it is argued that both call-by-value and call-by-name mechanisms yield the least fixed points of the functionals determined by the bodies of the procedures concerned. These functionals

Prediction of leakage in the fixed mechanical seal

Directory of Open Access Journals (Sweden)

Asheichik Anatoly A.

2017-01-01

Full Text Available The questions of influence of the shape of contact surfaces on leakages through rubber seals in fixed connection of subassemblies are considered in the article. It is known from practice of operation of seals of various designs that the shape of contact surfaces and consequently also the shape of diagram of stresses in a contact zone considerably influences on value of leaks Linking leakage magnitude and distribution of contact stresses enables, firstly, more precisely calculate the amount of leakage for existing seals, and, secondly, to optimize the shape of the seals in their design in each case. As the result of experimental studies on the introduction of the rubber gasket ring fixed indenters different profiles found that by optimizing the shape of the indenter magnitude of leakage can be reduced by 10 times.

Conceptual design of a chickpea harvesting header

Directory of Open Access Journals (Sweden)

H. Golpira

2013-07-01

Full Text Available Interest in the development of stripper headers is growing owing to the excessive losses of combine harvesters and costs of manually harvesting for chickpeas. The design of a new concept can enhance the mechanized process for chickpea harvesting. A modified stripper platform was designed, in which passive fingers with V-shape slots removes the pods from the anchored plant. The floating platform was accompanied by a reel to complete the harvesting header. Black-box modeling was used to redesign the functional operators of the header followed by an investigation of the system behavior. Physical models of the platform and reel were modified to determine the crucial variables of the header arrangement during field trials. The slot width was fixed at 40 mm, finger length at 40 mm, keyhole diameter at 10 mm and entrance width at 6 mm; the batted reel at peripheral diameter of 700 mm and speed at 50 rpm. A tractor-mounted experimental harvester was built to evaluate the work quality of the stripper header. The performance of the prototype was tested with respect to losses and results confirmed the efficiency of the modified stripper header for chickpea harvesting. Furthermore, the header with a 1.4 m working width produced the spot work rates of 0.42 ha h-1.

Round table on the Supply Chain for NPPs construction: Localization - Daya Bay Experience; REEL Handling and Lifting Systems, More than 60 years expertise in lifting and handling equipment in production process

International Nuclear Information System (INIS)

Frantz, Philippe; Lachaise, Marc; Lau, Steven

2014-01-01

The second day afternoon began with the round table on the Supply Chain for NPPs construction with Philippe Frantz, President of REEL, Marc Lachaise, Head of procurement of NNB at EDF Energy, and Steven Lau, First Deputy General Manager of DNMC. Philippe Frantz started to present the activities and the contribution of REEL in the construction of NPPs as a main supplier of handling system. Then, Marc Lachaise took the lead to present Hinkley Point C Project, the Values of NNB and the key role of the supply chain in this Project. Steven Lau went on to describe the link of the supply chain with the operating of NPPs and explained the cooperation between EDF and CGNPC in order to secure the supply of equipment. Following their presentation, they started the open discussion with the audience by explaining their strategy to make or to buy and the link of this strategy to their core business. They also highlighted the new relations and the new partnership between supplier and customer. They insisted on the necessity to invest on supply chain and to have a strong Nuclear Safety Culture in the supply chain

Fixed Base Modal Testing Using the NASA GRC Mechanical Vibration Facility

Science.gov (United States)

Staab, Lucas D.; Winkel, James P.; Suarez, Vicente J.; Jones, Trevor M.; Napolitano, Kevin L.

2016-01-01

The Space Power Facility at NASA's Plum Brook Station houses the world's largest and most powerful space environment simulation facilities, including the Mechanical Vibration Facility (MVF), which offers the world's highest-capacity multi-axis spacecraft shaker system. The MVF was designed to perform sine vibration testing of a Crew Exploration Vehicle (CEV)-class spacecraft with a total mass of 75,000 pounds, center of gravity (cg) height above the table of 284 inches, diameter of 18 feet, and capability of 1.25 gravity units peak acceleration in the vertical and 1.0 gravity units peak acceleration in the lateral directions. The MVF is a six-degree-of-freedom, servo-hydraulic, sinusoidal base-shake vibration system that has the advantage of being able to perform single-axis sine vibration testing of large structures in the vertical and two lateral axes without the need to reconfigure the test article for each axis. This paper discusses efforts to extend the MVF's capabilities so that it can also be used to determine fixed base modes of its test article without the need for an expensive test-correlated facility simulation.

Non-Fixed Investment in Voluntary Public Goods Games

Science.gov (United States)

Wang, Shuai; Xu, Zhaojin; Zhang, Lianzhong

2018-05-01

In this work, we introduce a non-fixed investment ratio to the public goods games in which players can determine whether or not to participate and how much money to invest into the common pool, and with it a new mechanism has been established. We explicitly demonstrate a different rockscissors- paper dynamics which is a consequence of this model. Meanwhile, it is shown how the mechanism of non-fixed investment ratio influences the players' decision. In addition, we found that the length of memory has an important effect on the average payoff of the population by this introduction.

Associations Between Fixed-Term Employment and Health and Behaviors: What are the Mechanisms?

Science.gov (United States)

Żołnierczyk-Zreda, Dorota; Bedyńska, Sylwia

2018-03-01

To analyze the associations between fixed-term employment and health (work ability and mental health) and behaviors (engagement and performance). Psychological contract fulfilment (PCF) and breach (PCB) are investigated as potential mediators of these associations. Seven hundred workers employed on fixed-term contracts from a broad range of organizations participated in the study. The Structural Equation Model was performed to analyze the data. Mediation analyses revealed that good physical and mental health and productivity are more likely to be achieved by those workers who perform non-manual work and (to some extent) accept their contracts because they experience high levels of PCF and low levels of PCB. Apart from the lack of physical workload, psychological contract fulfilment has been revealed as yet another significant mediator between a higher socioeconomic position and good health and productivity of fixed-term workers.

Reel Efektif Döviz Kurunun Durağanlığının Yapısal Kırılmalı Panel Birim Kök Testleri Kullanılarak Sınanması = Analyzing the Stationarity of Reel Effective Exchange Rates Using Panel Unit Root Tests with Structural Breaks

Directory of Open Access Journals (Sweden)

Ferda YERDELEN TATOĞLU

2009-06-01

Full Text Available In the last years, many studies have analyzed the stationarity of reel exchange rates which gives important knowledge about economic stability of countries. The panel unit root tests which include both pooled and individual unit root tests are used frequently to analyze the stationarity of real exchange rates. Generally, structural breaks issue have taken place in macroeconomic time series for some years. If unit root tests are used without taking account these structural breaks, stationarity hypothesis can be rejected mistakenly. In this study, panel unit root tests with and without structural breaks were used to analyze the validity of Purchasing Power Parity hypothesis in 25 OECD countries. According to the results, while in panel unit root tests with no break, PPP theory is valid for only 10 countries; it is valid for all countries in panel unit root tests with structural breaks.

Are There Differences in Gait Mechanics in Patients With A Fixed Versus Mobile Bearing Total Ankle Arthroplasty? A Randomized Trial.

Science.gov (United States)

Queen, Robin M; Franck, Christopher T; Schmitt, Daniel; Adams, Samuel B

2017-10-01

Total ankle arthroplasty (TAA) is an alternative to arthrodesis, but no randomized trial has examined whether a fixed bearing or mobile bearing implant provides improved gait mechanics. We wished to determine if fixed- or mobile-bearing TAA results in a larger improvement in pain scores and gait mechanics from before surgery to 1 year after surgery, and to quantify differences in outcomes using statistical analysis and report the standardized effect sizes for such comparisons. Patients with end-stage ankle arthritis who were scheduled for TAA between November 2011 and June 2013 (n = 40; 16 men, 24 women; average age, 63 years; age range, 35-81 years) were prospectively recruited for this study from a single foot and ankle orthopaedic clinic. During this period, 185 patients underwent TAA, with 144 being eligible to participate in this study. Patients were eligible to participate if they were able to meet all study inclusion criteria, which were: no previous diagnosis of rheumatoid arthritis, a contralateral TAA, bilateral ankle arthritis, previous revision TAA, an ankle fusion revision, or able to walk without the use of an assistive device, weight less than 250 pounds (114 kg), a sagittal or coronal plane deformity less than 15°, no presence of avascular necrosis of the distal tibia, no current neuropathy, age older than 35 years, no history of a talar neck fracture, or an avascular talus. Of the 144 eligible patients, 40 consented to participate in our randomized trial. These 40 patients were randomly assigned to either the fixed (n = 20) or mobile bearing implant group (n = 20). Walking speed, bilateral peak dorsiflexion angle, peak plantar flexion angle, sagittal plane ankle ROM, peak ankle inversion angle, peak plantar flexion moment, peak plantar flexion power during stance, peak weight acceptance, and propulsive vertical ground reaction force were analyzed during seven self-selected speed level walking trials for 33 participants using an eight

Maintaining stability of standalone Micro-Grid by employing electrical and mechanical fault ride through techniques upon fixed speed wind generation systems

International Nuclear Information System (INIS)

Kamel, Rashad M.

2013-01-01

Highlights: • This paper presented two fault ride through techniques for fixed speed wind systems. • The first technique is implemented by inserting a series resistance with the terminals of wind generator. • Second technique is performed by adapting the gear ratio to spill some mechanical power. - Abstract: This study presents two different Fault Ride Through (FRT) techniques to keep and restore stability of Fixed Speed Wind Generation system (FSWGs) installed in standalone Micro-Grid (MG). The first technique is an electrical FRT and is implemented by inserting a series resistance with the terminals of FSWGs during fault to maintain reasonable value of terminal voltage and consequently help stability restoration. The second controller is a mechanical FRT controller and is performed by change the gear ratio of wind generation systems to spill part of extracted mechanical power and consequently improving stability issue. Obtained results proved that each controller able to maintain the stability of FSWGs under the most severe disturbance conditions (400 ms three phase fault at FSWGs terminals). The first controller is faster than the second controller in restoring FSWGs stability. Superior results and performances are obtained when the two FRT techniques are employed simultaneously. Without employing any one of the two FRT techniques, FSWGs is not able to maintain or restore its stability after fault clearing. Consequently, MG will lose one of its micro-sources and cannot keep its stability during the standalone mode, unless load shedding strategy is activated. The two proposed controllers are simple, effective, and economical attractive

[Attaching single- and multi-unit fixed dental prostheses

NARCIS (Netherlands)

Kreulen, C.M.; Wolke, J.G.C.; Baat, C. de; Creugers, N.H.J.

2013-01-01

A single- or multi-unit fixed dental prosthesis can be attached to the abutment teeth through mechanical retention and gap sealing or by adhesion. For sealing the gap, water-soluble cements are appropriate, such as zinc phosphate, polycarboxylate, and (resin-modified) glasionomer cement. Attachment

The Factor of Structure and Mechanical Properties in the Production of Critical Fixing Hardware 38XA

Directory of Open Access Journals (Sweden)

G.V. Pachurin

2016-09-01

Full Text Available Fixing hardware made of carbon, high-carbon, and alloyed wires is one of the widespread critical parts in mechanical engineering. The characteristics of fixtures and fasteners and their performance figures are assessed at all stages of steel-making operation, from the choice of burden stock for metal smelting to the method of preparing calibrated rolled metal parts and upsetting end products. Material used for producing long high-duty bolts must be both sufficiently strong and ductile, have homogeneous mechanical properties and chemistry, and no inner or surface defects. When manufacturing fasteners, hot-rolled metal is often plastically deformed by drafting before cold upsetting, and all unacceptable defects are removed by the expensive procedure of lathe-turning. Moreover, this technology of metal processing entails losses of up to 5.5 % in chips. This paper suggests a resource-efficient and environmentally friendlier fabrication method for calibrated rolled metal items made of steel 38XA, 9.65 mm diameter, for cold die-forging of high-duty bolts used in automotive engines, which helps spare expensive lathe-machining processes. Moreover, rolled steel produced using this technology is characterized by high resistance to plastic deformation when cold, which leads to increase n wear-resistance of tools in cold die-forging of bolts.

Multiple exchange and high-energy fixed-angle scattering

CERN Document Server

Halliday, I G; Orzalesi, C A; Tau, M

1975-01-01

The application of the eikonal ansatz to fermion fermion elastic scattering with Abelian vector gluon exchanges is discussed. The behaviours of the elastic scattering amplitude and the elastic form factor are considered and an important mechanism for fixed angle high energy elastic scattering is identified. (6 refs).

An albumin-fixed membrane for the removal of protein-bound toxins

International Nuclear Information System (INIS)

Ge Dongtao; Wu Dewang; Shi Wei; Ma Yuanyuan; Tian Xiangdong; Liang Pengfei; Zhang Qiqing

2006-01-01

Established methods for kidney dialysis do not work for liver failure because kidney dialysis removes only water-soluble toxins, while the liver normally removes albumin-bound toxins. In the present study, a polysulfone dialysis membrane with a -OH reactive group was prepared by hydrolyzing the chloromethylated polysulfone membrane, and the bovine serum albumin molecules were fixed into the membrane with 1,1'-carbonyldiimidazole activation. The content of albumin of the albumin-fixed membrane was 121.3 mg (g membrane) -1 . The albumin-fixed dialysis membranes were used to remove protein-bound toxins, bilirubin, from the bilirubin-albumin solution. The transfer rate of bilirubin of the albumin-fixed membrane was obviously higher compared to the normal dialysis membrane. The clearance of bilirubin with the albumin-fixed membrane was 49.8%. The albumin-fixed membrane can easily be regenerated by the bovine serum albumin and NaOH solution. Regeneration of the membrane suggested good mechanical and chemical stability, as well as good clearance of bilirubin. In addition, the effects of membrane thickness and bilirubin initial concentration on the removal of bilirubin were discussed

Mechanical control of the plasmon coupling with Au nanoparticle arrays fixed on the elastomeric film via chemical bond

Science.gov (United States)

Bedogni, Elena; Kaneko, Satoshi; Fujii, Shintaro; Kiguchi, Manabu

2017-03-01

We have fabricated Au nanoparticle arrays on the flexible poly(dimethylsiloxane) (PDMS) film. The nanoparticles were bound to the film via a covalent bond by a ligand exchange reaction. Thanks to the strong chemical bonding, highly stable and uniformly dispersed Au nanoparticle arrays were fixed on the PDMS film. The Au nanoparticle arrays were characterized by the UV-vis, scanning electron microscope (SEM) and surface enhanced Raman scattering (SERS). The UV-vis and SEM measurements showed the uniformity of the surface-dispersed Au nanoparticles, and SERS measurement confirmed the chemistry of the PDMS film. Reflecting the high stability and the uniformity of the Au nanoparticle arrays, the plasmon wavelength of the Au nanoparticles reversely changed with modulation of the interparticle distance, which was induced by the stretching of the PDMS film. The plasmon wavelength linearly decreased from 664 to 591 nm by stretching of 60%. The plasmon wavelength shift can be explained by the change in the strength of the plasmon coupling which is mechanically controlled by the mechanical strain.

Fixed Points

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

BRST gauge fixing and regularization

International Nuclear Information System (INIS)

Damgaard, P.H.; Jonghe, F. de; Sollacher, R.

1995-05-01

In the presence of consistent regulators, the standard procedure of BRST gauge fixing (or moving from one gauge to another) can require non-trivial modifications. These modifications occur at the quantum level, and gauges exist which are only well-defined when quantum mechanical modifications are correctly taken into account. We illustrate how this phenomenon manifests itself in the solvable case of two-dimensional bosonization in the path-integral formalism. As a by-product, we show how to derive smooth bosonization in Batalin-Vilkovisky Lagrangian BRST quantization. (orig.)

Exploration of mechanisms underlying the strain-rate-dependent mechanical property of single chondrocytes

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Trung Dung; Gu, YuanTong, E-mail: yuantong.gu@qut.edu.au [School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Brisbane, Queensland (Australia)

2014-05-05

Based on the characterization by Atomic Force Microscopy, we report that the mechanical property of single chondrocytes has dependency on the strain-rates. By comparing the mechanical deformation responses and the Young's moduli of living and fixed chondrocytes at four different strain-rates, we explore the deformation mechanisms underlying this dependency property. We found that the strain-rate-dependent mechanical property of living cells is governed by both of the cellular cytoskeleton and the intracellular fluid when the fixed chondrocytes are mainly governed by their intracellular fluid, which is called the consolidation-dependent deformation behavior. Finally, we report that the porohyperelastic constitutive material model which can capture the consolidation-dependent behavior of both living and fixed chondrocytes is a potential candidature to study living cell biomechanics.

Fixed target flammable gas upgrades

International Nuclear Information System (INIS)

Schmitt, R.; Squires, B.; Gasteyer, T.; Richardson, R.

1996-12-01

In the past, fixed target flammable gas systems were not supported in an organized fashion. The Research Division, Mechanical Support Department began to support these gas systems for the 1995 run. This technical memo describes the new approach being used to supply chamber gasses to fixed target experiments at Fermilab. It describes the engineering design features, system safety, system documentation and performance results. Gas mixtures provide the medium for electron detection in proportional and drift chambers. Usually a mixture of a noble gas and a polyatomic quenching gas is used. Sometimes a small amount of electronegative gas is added as well. The mixture required is a function of the specific chamber design, including working voltage, gain requirements, high rate capability, aging and others. For the 1995 fixed target run all the experiments requested once through gas systems. We obtained a summary of problems from the 1990 fixed target run and made a summary of the operations logbook entries from the 1991 run. These summaries primarily include problems involving flammable gas alarms, but also include incidents where Operations was involved or informed. Usually contamination issues were dealt with by the experimenters. The summaries are attached. We discussed past operational issues with the experimenters involved. There were numerous incidents of drift chamber failure where contaminated gas was suspect. However analyses of the gas at the time usually did not show any particular problems. This could have been because the analysis did not look for the troublesome component, the contaminant was concentrated in the gas over the liquid and vented before the sample was taken, or that contaminants were drawn into the chambers directly through leaks or sub-atmospheric pressures. After some study we were unable to determine specific causes of past contamination problems, although in argon-ethane systems the problems were due to the ethane only

Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5.

Science.gov (United States)

Sharmin, Nusrat; Parsons, Andrew J; Rudd, Chris D; Ahmed, Ifty

2014-11-01

Previous studies investigating manufacture of phosphate-based glass fibres from glasses fixed with P2O5 content less than 50 mol% showed that continuous manufacture without breakage was very difficult. In this study, nine phosphate-based glass formulations from the system P2O5-CaO-Na2O-MgO-B2O3 were prepared with P2O5 contents fixed at 40, 45 and 50 mol%, where Na2O was replaced by 5 and 10 mol% B2O3 and MgO and CaO were fixed to 24 and 16 mol%, respectively. The effect of B2O3 addition on the fibre drawing, fibre mechanical properties and dissolution behaviour was investigated. It was found that addition of 5 and 10 mol% B2O3 enabled successful drawing of continuous fibres from glasses with phosphate (P2O5) contents fixed at 40, 45 and 50 mol%. The mechanical properties of the fibres were found to significantly increase with increasing B2O3 content. The highest tensile strength (1200 ± 130 MPa) was recorded for 45P2O5-16CaO-5Na2O-24MgO-10B2O3 glass fibres. The fibres were annealed, and a comparison of the mechanical properties and mode of degradation of annealed and non-annealed fibres were investigated. A decrease in tensile strength and an increase in tensile modulus were observed for the annealed fibres. An assessment of the change in mechanical properties of both the annealed and non-annealed fibres was performed in phosphate-buffered saline (PBS) at 37℃ for 28 and 60 days, respectively. Initial loss of mechanical properties due to annealing was found to be recovered with degradation. The B2O3-containing glass fibres were found to degrade at a much slower rate as compared to the non-B2O3-containing fibres. Both annealed and non-annealed fibres exhibited a peeling effect of the fibre's outer layer during degradation. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

N2-fixing red alder indirectly accelerates ecosystem nitrogen cycling

Science.gov (United States)

Perakis, Steven S.; Matkins, Joselin J.; Hibbs, David E.

2012-01-01

Symbiotic N2-fixing tree species can accelerate ecosystem N dynamics through decomposition via direct pathways by producing readily decomposed leaf litter and increasing N supply to decomposers, as well as via indirect pathways by increasing tissue and detrital N in non-fixing vegetation. To evaluate the relative importance of these pathways, we compared three-year decomposition and N dynamics of N2-fixing red alder leaf litter (2.34 %N) to both low-N (0.68 %N) and high-N (1.21 %N) litter of non-fixing Douglas-fir, and decomposed each litter source in four forests dominated by either red alder or Douglas-fir. We also used experimental N fertilization of decomposition plots to assess elevated N availability as a potential mechanism of N2-fixer effects on litter mass loss and N dynamics. Direct effects of N2-fixing red alder on decomposition occurred primarily as faster N release from red alder than Douglas-fir litter, but direct increases in N supply to decomposers via fertilization did not stimulate decomposition of any litter. Fixed N indirectly influenced detrital dynamics by increasing Douglas-fir tissue and litter N concentrations, which accelerated litter N release without accelerating mass loss. By increasing soil N, tissue N, and the rate of N release from litter of non-fixers, we conclude that N2-fixing vegetation can indirectly foster plant-soil feedbacks that contribute to the persistence of elevated N availability in terrestrial ecosystems.

THE CURRENT ACCOUNT DEFICIT AND THE FIXED EXCHANGE RATE. ADJUSTING MECHANISMS AND MODELS.

Directory of Open Access Journals (Sweden)

HATEGAN D.B. Anca

2010-07-01

Full Text Available The main purpose of the paper is to explain what measures can be taken in order to fix the trade deficit, and the pressure that is upon a country by imposing such measures. The international and the national supply and demand conditions change rapidly, and if a country doesn’t succeed in keeping a tight control over its deficit, a lot of factors will affect its wellbeing. In order to reduce the external trade deficit, the government needs to resort to several techniques. The desired result is to have a balanced current account, and therefore, the government is free to use measures such as fixing its exchange rate, reducing government spending etc. We have shown that all these measures will have a certain impact upon an economy, by allowing its exports to thrive and eliminate the danger from excessive imports, or vice-versa. The main conclusion our paper is that government intervention is allowed in order to maintain the balance of the current account.

[Characteristics of porcine thoracic arteries fixed with polyepoxy compound].

Science.gov (United States)

Yu, Xi-Xun; Chen, Huai-Qing

2005-09-01

To investigate the characteristics of porcine thoracic arteries fixed with ethylene glycol diglycidyl ether (EX-810) and to provide the proper scaffold materials for tissue-engineered blood vessel. The porcine thoracic arteries were respectively treated with 40 ml/L EX-810 and 6.25 g/L glutaraldehyde, and then they were examined with naked-eye, light microscope and scanning electron microscope. The fixation index determination, the amino acid analysis and the biomechanics test were also performed. The antigenicity of vascular tissues can be diminished by EX-810 through getting rid of cell in the vascular tissues or reducing the level of free amino groups in the vascular tissues. The structural integrity of vascular tissues can be preserved after treatment with EX-810. It was also found that the EX-810-fixed porcine vascular tissues appeared more similar to the natural vascular tissues in color and mechanical properties, and were more pliable than the glutaraldehyde-fixed tissues. The EX-810-fixed porcine thoracic arteries with low cytotoxicity and low antigenicity showed favorable characteristic similar to those of natural vessel, and it should be a promising material for fabricating scaffold of tissue-engineered blood vessel.

Analysis of the Almond Harvesting and Hulling Mechanization Process: A Case Study

Directory of Open Access Journals (Sweden)

Simone Pascuzzi

2017-12-01

Full Text Available The aim of this paper is the analysis of the almond harvesting system with a very high level of mechanization frequently used in Apulia for the almond harvesting and hulling process. Several tests were carried out to assess the technical aspects related to the machinery and to the mechanized harvesting system used itself, highlighting their usefulness, limits, and compatibility within the almond cultivation sector. Almonds were very easily separated from the tree, and this circumstance considerably improved the mechanical harvesting operation efficiency even if the total time was mainly affected by the time required to manoeuvre the machine and by the following manual tree beating. The mechanical pick-up from the ground was not effective, with only 30% of the dropped almond collected, which mainly was caused by both the pick-up reel of the machine being unable to approach the almonds dropped near the base of the trunk and the surface condition of the soil being unsuitably arranged for a mechanized pick-up operation. The work times concerning the hulling and screening processes, carried out at the farm, were heavily affected by several manual operations before, during, and after the executed process; nevertheless, the plant work capability varied from 170 to 200 kg/h with two operators.

Design of Human-machine Interaction Auto-control System of Solar-powered Hose Reel Sprinkler Based on DSP and ARM%基于DSP和ARM的人机交互绞盘式太阳能喷灌机控制系统设计

Institute of Scientific and Technical Information of China (English)

王昌伟; 朱德兰; 张林; 王斌; 刘柯楠; 陈昕

2015-01-01

针对目前市场上传统的采用水涡轮驱动的绞盘式喷灌机存在的能耗大，对灌溉水泥沙含量要求高，调速装置结构复杂及PE管易牵折等问题，联合采用高性能光伏M PPT 控制永磁无刷电机，基于DSP和ARM 两款微处理器，借助现代传感检测、无线传输及可视化触控技术，设计了一种人机交互绞盘式太阳能喷灌机智能控制系统。通过对系统的性能测试验证表明：修正步长的P&O法能有效地提高系统M PPT 速度和准确度，增加光伏组件转换率；系统调速性能平稳，动态响应快；系统工作性能可靠，灌溉质量高，推广应用前景广阔。%Because the traditional hose reel sprinkler driven by hydraulic turbine has the shortcomings of high energy and water con‐sumption ,high requirements for silt content of irrigation water ,complex structure of speed regulating device and easy break of PE pipe of current market ,this article designs an intelligent human-machine interaction control system of solar-powered hose reel sprin‐kler ,of which the reel is driven through high performance photovoltaic brushless PM motor and hydraulic turbine based on DSP and ARM ,and the modern sensor technology ,wireless transmission technology and visual touch technology use are used .It's showed that variable step length P&O method can effectively improve the MPPT speed and accuracy ,the system can provide a stable speed char‐acteristic and fast dynamic response and improve the conversion rate of PV module ;the unit has high irrigation quality and reliable work performance through verifying the performance .In general ,the system has broad application and promotion prospects .

Fuel rod fixing system

International Nuclear Information System (INIS)

Christiansen, D.W.

1982-01-01

This is a reusable system for fixing a nuclear reactor fuel rod to a support. An interlock cap is fixed to the fuel rod and an interlock strip is fixed to the support. The interlock cap has two opposed fingers, which are shaped so that a base is formed with a body part. The interlock strip has an extension, which is shaped so that this is rigidly fixed to the body part of the base. The fingers of the interlock cap are elastic in bending. To fix it, the interlock cap is pushed longitudinally on to the interlock strip, which causes the extension to bend the fingers open in order to engage with the body part of the base. To remove it, the procedure is reversed. (orig.) [de

Insights into signal transduction by a hybrid FixL: Denaturation study of on and off states of a multi-domain oxygen sensor.

Science.gov (United States)

Guimarães, Wellinson G; Gondim, Ana C S; Costa, Pedro Mikael da Silva; Gilles-Gonzalez, Marie-Alda; Lopes, Luiz G F; Carepo, Marta S P; Sousa, Eduardo H S

2017-07-01

FixL from Rhizobium etli (ReFixL) is a hybrid oxygen sensor protein. Signal transduction in ReFixL is effected by a switch off of the kinase activity on binding of an oxygen molecule to ferrous heme iron in another domain. Cyanide can also inhibit the kinase activity upon binding to the heme iron in the ferric state. The unfolding by urea of the purified full-length ReFixL in both active pentacoordinate form, met-FixL(Fe III ) and inactive cyanomet-FixL (Fe III -CN - ) form was monitored by UV-visible absorption spectroscopy, circular dichroism (CD) and fluorescence spectroscopy. The CD and UV-visible absorption spectroscopy revealed two states during unfolding, whereas fluorescence spectroscopy identified a three-state unfolding mechanism. The unfolding mechanism was not altered for the active compared to the inactive state; however, differences in the ΔG H2O were observed. According to the CD results, compared to cyanomet-FixL, met-FixL was more stable towards chemical denaturation by urea (7.2 vs 4.8kJmol -1 ). By contrast, electronic spectroscopy monitoring of the Soret band showed cyanomet-FixL to be more stable than met-FixL (18.5 versus 36.2kJmol -1 ). For the three-state mechanism exhibited by fluorescence, the ΔG H2O for both denaturation steps were higher for the active-state met-FixL than for cyanomet-FixL. The overall stability of met-FixL is higher in comparison to cyanomet-FixL suggesting a more compact protein in the active form. Nonetheless, hydrogen bonding by bound cyanide in the inactive state promotes the stability of the heme domain. This work supports a model of signal transduction by FixL that is likely shared by other heme-based sensors. Copyright © 2017 Elsevier Inc. All rights reserved.

Positron-electron annihilation in a field of a fixed electric dipole

International Nuclear Information System (INIS)

Butkevich, E.R.; Sabirov, R.Kh.

1989-01-01

Positron annihilation from dipole Ps state conditioned by simultaneous localization of positron and electron in the field of fixed electric dipole is considered. Calculation of annihilation γ-quantum angular correlation curve is performed. For the fixed value of the dipole moment the correlation curve half-width is reduced with the reduction of dipole charges. Correlation curve narrowing takes place with the growth of dipole moment. It is stressed that when interpreting the narrow component one should be careful when choosing the appropriate annihilation mechanism. Experimental result analysis is given

Defense Contractor Restructuring; DoD Risks Forfeiting Savings on Fixed-Price Contracts

National Research Council Canada - National Science Library

1998-01-01

... on fixed-price contracts awarded to companies involved in a business combination between the time a combination is announced and the time that restructuring savings are reflected in the mechanism used...

Characterizing fixed points

Directory of Open Access Journals (Sweden)

Sanjo Zlobec

2017-04-01

Full Text Available A set of sufficient conditions which guarantee the existence of a point x⋆ such that f(x⋆ = x⋆ is called a "fixed point theorem". Many such theorems are named after well-known mathematicians and economists. Fixed point theorems are among most useful ones in applied mathematics, especially in economics and game theory. Particularly important theorem in these areas is Kakutani's fixed point theorem which ensures existence of fixed point for point-to-set mappings, e.g., [2, 3, 4]. John Nash developed and applied Kakutani's ideas to prove the existence of (what became known as "Nash equilibrium" for finite games with mixed strategies for any number of players. This work earned him a Nobel Prize in Economics that he shared with two mathematicians. Nash's life was dramatized in the movie "Beautiful Mind" in 2001. In this paper, we approach the system f(x = x differently. Instead of studying existence of its solutions our objective is to determine conditions which are both necessary and sufficient that an arbitrary point x⋆ is a fixed point, i.e., that it satisfies f(x⋆ = x⋆. The existence of solutions for continuous function f of the single variable is easy to establish using the Intermediate Value Theorem of Calculus. However, characterizing fixed points x⋆, i.e., providing answers to the question of finding both necessary and sufficient conditions for an arbitrary given x⋆ to satisfy f(x⋆ = x⋆, is not simple even for functions of the single variable. It is possible that constructive answers do not exist. Our objective is to find them. Our work may require some less familiar tools. One of these might be the "quadratic envelope characterization of zero-derivative point" recalled in the next section. The results are taken from the author's current research project "Studying the Essence of Fixed Points". They are believed to be original. The author has received several feedbacks on the preliminary report and on parts of the project

Infrared fixed points and fixed lines in the top-bottom-tau sector in supersymmetric grand unification

International Nuclear Information System (INIS)

Schrempp, B.

1994-10-01

The two loop 'top-down' renormalization group flow for the top, bottom and tau Yukawa couplings, from μ=M GUT ≅O(10 16 GeV) to μ≅m t , is explored in the framework of supersymmetric grand unification; reproduction of the physical bottom and tau masses is required. Instead of following the recent trend of implementing exact Yukawa coupling unification i) a search for infrared (IR) fixed lines and fixed points in the m t pole -tan β plane is performed and ii) the extent to which these imply approximate Yukawa unification is determined. In the m t pole -tan β plane two IR fixed lines, intersecting in an IR fixed point, are located. The more attractive fixed line has a branch of almost constant top mass, m t pole ≅168≅180 GeV (close to the experimental value), for the large interval 2.5 GUT approximately. The less attractive fixed line as well as the fixed point at m t pole ≅170 GeV, tan β≅55 implement approximate top-bottom Yukawa unification at all scales μ. The renormalization group flow is attracted towards the IR fixed point by way of the more attractive IR fixed line. The fixed point and lines are distinct from the much quoted effective IR fixed point m t pole ≅O(200 GeV) sin β. (orig.)

[XIGDUO - fixed combination of the active ingredients dapagliflozin and metformin].

Science.gov (United States)

Edelsberger, Tomáš

2016-03-01

Fixed dose combination of two different drugs in the same or related indications are successfully used in various medical fields including diabetology. This article deals with the combination therapy comprising metformin and dapagliflozin in a single preparation, molecules affecting different pathophysiological mechanisms of type 2 diabetes, particularly insulin resistance and increased glucose reabsorption in the kidney. Most patients with type 2 diabetes does not achieve target glycemic control when treated with single antidiabetics and need for proper control of diabetes combination of several different drugs. Using the fixed combination leads to improved patients adherence and utilization of the full therapeutic potential of selected drugs.

PLANAR MECHANISMS USED FOR GENERATING CURVE LINE TRANSLATION MOTION

Directory of Open Access Journals (Sweden)

Ovidiu ANTONESCU

2015-05-01

Full Text Available The curve line translation motion can be generated in the particular form of the circular translation, through mono-mobile mechanisms with articulated links of simple parallelogram type (with a fixed side or through transmission with toothed belt with a fixed wheel. Also, the circular translation can be generated through planar mechanisms with two cylindrical gears with a fixed central wheel. It is mentioned that the two cylindrical gearings of the Fergusson mechanisms are both exterior and interior.

Study on the fixed point in crustal deformation before strong earthquake

Science.gov (United States)

Niu, A.; Li, Y.; Yan, W. Mr

2017-12-01

Usually, scholars believe that the fault pre-sliding or expansion phenomenon will be observed near epicenter area before strong earthquake, but more and more observations show that the crust deformation nearby epicenter area is smallest(Zhou, 1997; Niu,2009,2012;Bilham, 2005; Amoruso et al., 2010). The theory of Fixed point t is a branch of mathematics that arises from the theory of topological transformation and has important applications in obvious model analysis. An important precursory was observed by two tilt-meter sets, installed at Wenchuan Observatory in the epicenter area, that the tilt changes were the smallest compared with the other 8 stations around them in one year before the Wenchuan earthquake. To subscribe the phenomenon, we proposed the minimum annual variation range that used as a topological transformation. The window length is 1 year, and the sliding length is 1 day. The convergence of points with minimum annual change in the 3 years before the Wenchuan earthquake is studied. And the results show that the points with minimum deformation amplitude basically converge to the epicenter region before the earthquake. The possible mechanism of fixed point of crustal deformation was explored. Concerning the fixed point of crust deformation, the liquidity of lithospheric medium and the isostasy theory are accepted by many scholars (Bott &Dean, 1973; Merer et al.1988; Molnar et al., 1975,1978; Tapponnier et al., 1976; Wang et al., 2001). To explain the fixed point of crust deformation before earthquakes, we study the plate bending model (Bai, et al., 2003). According to plate bending model and real deformation data, we have found that the earthquake rupture occurred around the extreme point of plate bending, where the velocities of displacement, tilt, strain, gravity and so on are close to zero, and the fixed points are located around the epicenter.The phenomenon of fixed point of crust deformation is different from former understandings about the

A direct bonded fixed partial dental prosthesis: A clinical report

OpenAIRE

Tanoue, Naomi; Tanaka, Takuo

2015-01-01

A direct bonded fixed partial dental prosthesis, with a composite resin denture tooth as a pontic, a tri-n-butylborane initiated adhesive resin, and screw posts for reinforcement, was still functioning after an observation period of 20 years. The prosthesis was found to be reliable for long-term clinical use when chemically and mechanically reinforced.

Fixing the Central Parity and the Evolution of the Currency within the Exchange Rate Mechanism II in the Countries that Joined the Euro Zone

Directory of Open Access Journals (Sweden)

Lucian ANGHEL

2014-06-01

Full Text Available The present paper presents the models used by the countries that joined the Euro zone after 2000, in fixing the central parity and the evolution of the local currency towards Euro, when participating in Exchange Rate Mechanism II (ERM II. It synthesizes the main theories for determining the equilibrium exchange rate. It also presents the modality of putting them into practice in the countries that had already become members of the Euro zone. The better we know the other countries’ experience in the respect of the joining process to the Euro zone, the better will Romania be able to prepare itself for adopting the unique European currency. Thus, we will be synthesize the main approaches within literature and also in the economic policy deciders’ practice concerning the estimation of the equilibrium exchange rate and implicitly, of the central parity. The paper presents the modality of fixing the central parity and the experience of participating in ERM II for a number of member states that joined the Euro zone after 2000: Greece, Slovakia, Slovenia, Malta, Cyprus and Estonia. For these states we also analyze the evolution of the currency towards Euro while participating in ERM II. Starting from these examples, we explain the advantages and the disadvantages in fixing the central parity over/at/under the value of the exchange rate on the market at the moment of joining ERM II and we underline the problems that might occur in the case of choosing a central parity that is not compatible with the equilibrium value of the exchange rate.

Fixed-film processes. Part 1

International Nuclear Information System (INIS)

Canziani, R.

1999-01-01

Recently, full scale fixed-film or mixed suspended and fixed biomass bioreactors have been applied in many wastewater treatments plants. These process no longer depend on biomass settle ability and can be used to improve the performance of existing plants as required by more stringent discharge permit limits, especially for nutrients and suspended solid. Also, processes may work at high rates making it possible to build small footprint installations. Fixed-film process include trickling filter, moving bed reactors fluidized bed reactors. In the first part, the theoretical base governing fixed-film processes are briefly outlined with some simple examples of calculations underlining the main differences with conventional activated sludge processes [it

Covalent Bonding of Thermoplastics to Rubbers for Printable, Reel-to-Reel Processing in Soft Robotics and Microfluidics.

Science.gov (United States)

Taylor, Jay M; Perez-Toralla, Karla; Aispuro, Ruby; Morin, Stephen A

2018-02-01

The lamination of mechanically stiff structures to elastic materials is prevalent in biological systems and popular in many emerging synthetic systems, such as soft robotics, microfluidics, stretchable electronics, and pop-up assemblies. The disparate mechanical and chemical properties of these materials have made it challenging to develop universal synthetic procedures capable of reliably adhering to these classes of materials together. Herein, a simple and scalable procedure is described that is capable of covalently laminating a variety of commodity ("off-the-shelf") thermoplastic sheets to silicone rubber films. When combined with laser printing, the nonbonding sites can be "printed" onto the thermoplastic sheets, enabling the direct fabrication of microfluidic systems for actuation and liquid handling applications. The versatility of this approach in generating thin, multifunctional laminates is demonstrated through the fabrication of milliscale soft actuators and grippers with hinged articulation and microfluidic channels with built-in optical filtering and pressure-dependent geometries. This method of fabrication offers several advantages, including technical simplicity, process scalability, design versatility, and material diversity. The concepts and strategies presented herein are broadly applicable to the soft robotics, microfluidics, and advanced and additive manufacturing communities where hybrid rubber/plastic structures are prevalent. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Application and appreciation of chemical sand fixing agent-poly (aspartic acid) and its composites

Energy Technology Data Exchange (ETDEWEB)

Yang Jun; Cao Hui; Wang Fang [Beijing Key Laboratory of Bioprocess, Beijing University of Chemical Technology, Beijing 100029 (China); Tan Tianwei [Beijing Key Laboratory of Bioprocess, Beijing University of Chemical Technology, Beijing 100029 (China)], E-mail: twtan@mail.buct.edu.cn

2007-12-15

The sand fixing agent-poly (aspartic acid) (PASP) and its composites were applied in the field by two forms (spraying around by PASP solution and PASP powder directly). It was found that the sand fixing effect in powder form was not as good as in solution form, but it was more practical in dry region. It needed 9, 6 and 7 days for PASP, xanthan gum-PASP (X2) and ethyl cellulose-PASP (E3) to attain the maximal mechanical strength after they were applied, respectively. The sand fixing effect decreased when the material was subjected to repeated hydration-dehydration cycles and the material had no negative influence on plant growth. The PASP and its composites had water-retaining ability and could reduce the water evaporation. - The sand fixing agent was applied in powder form and it had no negative influence on plant growth.

Fixed-Point Configurable Hardware Components

Directory of Open Access Journals (Sweden)

Rocher Romuald

2006-01-01

Full Text Available To reduce the gap between the VLSI technology capability and the designer productivity, design reuse based on IP (intellectual properties is commonly used. In terms of arithmetic accuracy, the generated architecture can generally only be configured through the input and output word lengths. In this paper, a new kind of method to optimize fixed-point arithmetic IP has been proposed. The architecture cost is minimized under accuracy constraints defined by the user. Our approach allows exploring the fixed-point search space and the algorithm-level search space to select the optimized structure and fixed-point specification. To significantly reduce the optimization and design times, analytical models are used for the fixed-point optimization process.

Kinetics of Nif gene expression in a nitrogen-fixing bacterium.

Science.gov (United States)

Poza-Carrión, César; Jiménez-Vicente, Emilio; Navarro-Rodríguez, Mónica; Echavarri-Erasun, Carlos; Rubio, Luis M

2014-02-01

Nitrogen fixation is a tightly regulated trait. Switching from N2 fixation-repressing conditions to the N2-fixing state is carefully controlled in diazotrophic bacteria mainly because of the high energy demand that it imposes. By using quantitative real-time PCR and quantitative immunoblotting, we show here how nitrogen fixation (nif) gene expression develops in Azotobacter vinelandii upon derepression. Transient expression of the transcriptional activator-encoding gene, nifA, was followed by subsequent, longer-duration waves of expression of the nitrogenase biosynthetic and structural genes. Importantly, expression timing, expression levels, and NifA dependence varied greatly among the nif operons. Moreover, the exact concentrations of Nif proteins and their changes over time were determined for the first time. Nif protein concentrations were exquisitely balanced, with FeMo cofactor biosynthetic proteins accumulating at levels 50- to 100-fold lower than those of the structural proteins. Mutants lacking nitrogenase structural genes or impaired in FeMo cofactor biosynthesis showed overenhanced responses to derepression that were proportional to the degree of nitrogenase activity impairment, consistent with the existence of at least two negative-feedback regulatory mechanisms. The first such mechanism responded to the levels of fixed nitrogen, whereas the second mechanism appeared to respond to the levels of the mature NifDK component. Altogether, these findings provide a framework to engineer N2 fixation in nondiazotrophs.

Fixed-time stability of dynamical systems and fixed-time synchronization of coupled discontinuous neural networks.

Science.gov (United States)

Hu, Cheng; Yu, Juan; Chen, Zhanheng; Jiang, Haijun; Huang, Tingwen

2017-05-01

In this paper, the fixed-time stability of dynamical systems and the fixed-time synchronization of coupled discontinuous neural networks are investigated under the framework of Filippov solution. Firstly, by means of reduction to absurdity, a theorem of fixed-time stability is established and a high-precision estimation of the settling-time is given. It is shown by theoretic proof that the estimation bound of the settling time given in this paper is less conservative and more accurate compared with the classical results. Besides, as an important application, the fixed-time synchronization of coupled neural networks with discontinuous activation functions is proposed. By designing a discontinuous control law and using the theory of differential inclusions, some new criteria are derived to ensure the fixed-time synchronization of the addressed coupled networks. Finally, two numerical examples are provided to show the effectiveness and validity of the theoretical results. Copyright © 2017 Elsevier Ltd. All rights reserved.

Small Angle Neutron Scattering (sans) Studies on "SIDE-END FIXED" and "SIDE-ON FIXED" Liquid Crystal Polymers

Science.gov (United States)

Hardouin, F.; Noirez, L.; Keller, P.; Leroux, N.; Cotton, J. P.

The following sections are included: * Introduction * Experimental * Results and discussion * Determination of the backbone conformation in the nematic and smectic A phases of "side-end fixed" L.C. polymethacrylates (PMA) or polyacrylates (PA) * Determination of the global and backbone conformation in the nematic and smectic A phases of "side-end fixed" L.C. polysiloxanes (PMS) * Determination of the backbone conformation in the unique nematic phase (without smectic A phase) or in the reentrant nematic phase (below smectic A phase) of "side-end fixed" L.C. polyacrylates (PA) * Determination of the global conformation in the nematic phase of "side-on fixed" L.C. polysiloxanes (PMS) * Determination of the global conformation in the nematic phase of "diluted side-on fixed" L.C. copolysiloxanes * Determination of the backbone conformation in the nematic phase of "side-on fixed" L.C. polyacrylates * Conclusions * References

DeepFix: A Fully Convolutional Neural Network for Predicting Human Eye Fixations.

Science.gov (United States)

Kruthiventi, Srinivas S S; Ayush, Kumar; Babu, R Venkatesh

2017-09-01

Understanding and predicting the human visual attention mechanism is an active area of research in the fields of neuroscience and computer vision. In this paper, we propose DeepFix, a fully convolutional neural network, which models the bottom-up mechanism of visual attention via saliency prediction. Unlike classical works, which characterize the saliency map using various hand-crafted features, our model automatically learns features in a hierarchical fashion and predicts the saliency map in an end-to-end manner. DeepFix is designed to capture semantics at multiple scales while taking global context into account, by using network layers with very large receptive fields. Generally, fully convolutional nets are spatially invariant-this prevents them from modeling location-dependent patterns (e.g., centre-bias). Our network handles this by incorporating a novel location-biased convolutional layer. We evaluate our model on multiple challenging saliency data sets and show that it achieves the state-of-the-art results.

Fixed-film processes. Part 2

International Nuclear Information System (INIS)

Canziani, R.

1999-01-01

Recently, full scale fixed-film or mixed suspended have been applied in many wastewater treatments plants. These processes no longer depend on biomass settle ability and can be used to improve the performance of existing plants as required by more stringent discharge permit limits, especially for nutrients suspended solids. Also, processes may work at high rates making is possible to build small footprint installations. Fixed-film processes include trickling filters (and combined suspended and fixed-films processes), rotating biological contactors, biological aerated submerged, filters moving bed reactors, fluidized bed reactors. In the first part, the theoretical based governing fixed-film processes are briefly outlined, with some simple examples of calculations, underlining the main differences with conventional activate sludge processes. In the second part, the most common types of reactors are reviewed [it

Comparison of heating deposition patterns for stacked linear phased array and fixed focus ultrasonic hyperthermia applicators

International Nuclear Information System (INIS)

Ocheltree, K.B.; Benkeser, P.J.; Frizzell, L.A.; Cain, C.A.

1985-01-01

An ultrasonic stacked linear phased array applicator for hyperthermia has been designed to heat tumors at depths from 5 to 10 cm. The power deposition pattern for this applicator is compared to that for a fixed focus applicator for several different scan paths. The power deposition pattern for the stacked linear phased array shows hot spots that are not observed for the mechanically scanned fixed focus applicator. These hot spots are related to the skewed power deposition pattern resulting from scanning the focus off the center of the linear arrays. The overall performance of the stacked linear phased array applicator is compared to that of a fixed focus applicator

Fix 40!

Index Scriptorium Estoniae

2008-01-01

Ansambel Fix peab 13. detsembril Tallinnas Saku Suurhallis oma 40. sünnipäeva. Kontserdi erikülaline on ansambel Apelsin, kaastegevad Jassi Zahharov ja HaleBopp Singers. Õhtut juhib Tarmo Leinatamm

BRST cosmology and BRST gauge fixing

International Nuclear Information System (INIS)

Kalau, W.; Nationaal Inst. voor Kernfysica en Hoge-Energiefysica; Holten, J.W. van

1991-01-01

Some general aspects of BRST cohomology are discussed. The BRST gauge-fixing procedure based on the harmonic gauges in the ghost-extended quantum mechanical Hilbert space. A general classification of states according to their BRST transformation properties is obtained.On the basis of these results necessary and sufficient conditions are found for the positivity of the physical state space following an earlier analysis of Spiegelglas. The method is applied to a system with a non semi-simple, solvable algebra of first-class constraints, such as appears in the theory of massless higher spins. It is found that both the Dirac and Gupta-Bleuler quantization procedures are contained within the BRST approach. (author). 15 refs

Device for selectively securing an object to a shaft

International Nuclear Information System (INIS)

Calizano, F.; Chauvel, M.

1984-01-01

A magnetic tape reel is secured to a reel drive motor shaft by a device including a hub secured to the shaft, a plurality of shoes, and actuating means for thrusting the shoes against the reel and for releasing them from contact with the reel. The securing device includes a cam mounted on the shaft in combination with a locking device including the cam periphery. The locking device thrusts the shoes against the object and is operated by rotation of the motor. The cam is immobilized in rotation while the shoes are locked

Fixed points of quantum gravity

OpenAIRE

Litim, D F

2003-01-01

Euclidean quantum gravity is studied with renormalisation group methods. Analytical results for a non-trivial ultraviolet fixed point are found for arbitrary dimensions and gauge fixing parameter in the Einstein-Hilbert truncation. Implications for quantum gravity in four dimensions are discussed.

Impact of fixed-mobile convergence

DEFF Research Database (Denmark)

Pachnicke, Stephan; Andrus, Bogdan-Mihai; Autenrieth, Achim

2016-01-01

Fixed-Mobile Convergence (FMC) is a very trendy concept as it promises integration of the previously separated fixed access network and the mobile network. From this novel approach telecommunication operators expect significant cost savings and performance improvements. FMC can be separated...

THE PROBLEMS OF FIXED ASSETS CLASSIFICATION FOR ACCOUNTING

Directory of Open Access Journals (Sweden)

Sophiia Kafka

2016-06-01

Full Text Available This article provides a critical analysis of research in accounting of fixed assets; the basic issues of fixed assets accounting that have been developed by the Ukrainian scientists during 1999-2016 have been determined. It is established that the problems of non-current assets taxation and their classification are the most noteworthy. In the dissertations the issues of fixed assets classification are of exclusively particular branch nature, so its improvement is important. The purpose of the article is developing science-based classification of fixed assets for accounting purposes since their composition is quite diverse. The classification of fixed assets for accounting purposes have been summarized and developed in Figure 1 according to the results of the research. The accomplished analysis of existing approaches to classification of fixed assets has made it possible to specify its basic types and justify the classification criteria of fixed assets for the main objects of fixed assets. Key words: non-current assets, fixed assets, accounting, valuation, classification of the fixed assets. JEL:G M41  

Fragmentation of organic ions bearing fixed multiple charges observed in MALDI MS.

Science.gov (United States)

Lou, Xianwen; Li, Bao; de Waal, Bas F M; Schill, Jurgen; Baker, Matthew B; Bovee, Ralf A A; van Dongen, Joost L J; Milroy, Lech-Gustav; Meijer, E W

2018-01-01

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS) was used to analyze a series of synthetic organic ions bearing fixed multiple charges. Despite the multiple intrinsic charges, only singly charged ions were recorded in each case. In addition to the pseudo-molecular ions formed by counterion adduction, deprotonation and electron capture, a number of fragment ions were also observed. Charge splitting by fragmentation was found to be a viable route for charge reduction leading to the formation of the observed singly charged fragment ions. Unlike multivalent metal ions, organic ions can rearrange and/or fragment during charge reduction. This fragmentation process will evidently complicate the interpretation of the MALDI MS spectrum. Because MALDI MS is usually considered as a soft ionization technique, the fragment ion peaks can easily be erroneously interpreted as impurities. Therefore, the awareness and understanding of the underlying MALDI-induced fragmentation pathways is essential for a proper interpretation of the corresponding mass spectra. Due to the fragment ions generated during charge reduction, special care should be taken in the MALDI MS analysis of multiply charged ions. In this work, the possible mechanisms by which the organic ions bearing fixed multiple charges fragment are investigated. With an improved understanding of the fragmentation mechanisms, MALDI TOF MS should still be a useful technique for the characterization of organic ions with fixed multiple charges. Copyright © 2017 John Wiley & Sons, Ltd.

Operation and experience of a 2 km coated conductor REEL – to – REEL copper pulse plating facility

International Nuclear Information System (INIS)

Floegel-Delor, U; Riedel, T; Wippich, D; Rothfeld, R; Schirrmeister, P; Koenig, R; Werfel, F N; Usoskin, A; Rutt, A

2014-01-01

Bruker HTS manufactures YBCO based superconducting wires of the second generation on low- cost Stainless Steel substrate (100 μm thick). With 250 – 500 A/cm@77 K, SF, 650 MPa tensile strength and 6 mm bending radius excellent electrical and mechanical properties are achieved. As complementation of the 2G fabrication technology an automated 2 km copper pulse plating facility has been installed in 2012. We report here the operation requirements and the experiences of the copper plating technique.

Flat Coalgebraic Fixed Point Logics

Science.gov (United States)

Schröder, Lutz; Venema, Yde

Fixed point logics are widely used in computer science, in particular in artificial intelligence and concurrency. The most expressive logics of this type are the μ-calculus and its relatives. However, popular fixed point logics tend to trade expressivity for simplicity and readability, and in fact often live within the single variable fragment of the μ-calculus. The family of such flat fixed point logics includes, e.g., CTL, the *-nesting-free fragment of PDL, and the logic of common knowledge. Here, we extend this notion to the generic semantic framework of coalgebraic logic, thus covering a wide range of logics beyond the standard μ-calculus including, e.g., flat fragments of the graded μ-calculus and the alternating-time μ-calculus (such as ATL), as well as probabilistic and monotone fixed point logics. Our main results are completeness of the Kozen-Park axiomatization and a timed-out tableaux method that matches ExpTime upper bounds inherited from the coalgebraic μ-calculus but avoids using automata.

Infra-red fixed points in supersymmetry

Indian Academy of Sciences (India)

¾c /font>, and c stands for the color quadratic Casimir of the field. Fixed points arise when R* ¼ or when R*. /nobr>. ´S-½. µ ´r ·b¿µ. The stability of the solutions may be tested by linearizing the system about the fixed points. For the non-trivial fixed points we need to consider the eigenvalues of the stability matrix whose ...

INNOVATIVE SYSTEM OF FIXED CAPITAL REPRODUCTION

Directory of Open Access Journals (Sweden)

G. S. Merzlikina

2015-01-01

Full Text Available The article presents the basic problems of fixed capital reproduction. There are considered a significant depreciation of fixed assets of Russian enterprises. There are presented arguments in favor of urgency of the problem of reproduction of fixed assets of the Russian Federation. The paper presents theoretical evidence base basic types of fixed capital reproduction. There are identified all possible sources of simple and expanded reproduction of capital. There are considered the role of value and feasibility of depreciation in the formation of Reserve reproduction. Suggested the formation of accounting and analytical management provision fixed capital, as well as an innovative system of fixed capital reproduction, which implies the creation of depreciation , capital, revaluation, liquidation reserves. The algorithm of business valuation based on an innovative system of capital reproduction. The algorithm and the possibility of formation of reserves are considered on a concrete example of one of the industrial enterprises of the city Volgograd. On the basis of the algorithm presented calculations of business valuation of the enterprise. Calculations have shown an increase in value of the business condition of the formation of special reserves, which underlines the necessary and urgency of their formation in accounting policy and economy organizations and enterprises of Russia as a whole.

Fixed mobile convergence handbook

CERN Document Server

Ahson, Syed A

2010-01-01

From basic concepts to future directions, this handbook provides technical information on all aspects of fixed-mobile convergence (FMC). The book examines such topics as integrated management architecture, business trends and strategic implications for service providers, personal area networks, mobile controlled handover methods, SIP-based session mobility, and supervisory and notification aggregator service. Case studies are used to illustrate technical and systematic implementation of unified and rationalized internet access by fixed-mobile network convergence. The text examines the technolo

Global gauge fixing in lattice gauge theories

Energy Technology Data Exchange (ETDEWEB)

Fachin, S.; Parrinello, C. (Physics Department, New York University, 4 Washington Place, New York, New York (USA))

1991-10-15

We propose a covariant, nonperturbative gauge-fixing procedure for lattice gauge theories that avoids the problem of Gribov copies. This is closely related to a recent proposal for a gauge fixing in the continuum that we review. The lattice gauge-fixed model allows both analytical and numerical investigations: on the analytical side, explicit nonperturbative calculations of gauge-dependent quantities can be easily performed in the framework of a generalized strong-coupling expansion, while on the numerical side a stochastic gauge-fixing algorithm is very naturally associated with the scheme. In both applications one can study the gauge dependence of the results, since the model actually provides a smooth'' family of gauge-fixing conditions.

Double-stranded DNA translocase activity of transcription factor TFIIH and the mechanism of RNA polymerase II open complex formation.

Science.gov (United States)

Fishburn, James; Tomko, Eric; Galburt, Eric; Hahn, Steven

2015-03-31

Formation of the RNA polymerase II (Pol II) open complex (OC) requires DNA unwinding mediated by the transcription factor TFIIH helicase-related subunit XPB/Ssl2. Because XPB/Ssl2 binds DNA downstream from the location of DNA unwinding, it cannot function using a conventional helicase mechanism. Here we show that yeast TFIIH contains an Ssl2-dependent double-stranded DNA translocase activity. Ssl2 tracks along one DNA strand in the 5' → 3' direction, implying it uses the nontemplate promoter strand to reel downstream DNA into the Pol II cleft, creating torsional strain and leading to DNA unwinding. Analysis of the Ssl2 and DNA-dependent ATPase activity of TFIIH suggests that Ssl2 has a processivity of approximately one DNA turn, consistent with the length of DNA unwound during transcription initiation. Our results can explain why maintaining the OC requires continuous ATP hydrolysis and the function of TFIIH in promoter escape. Our results also suggest that XPB/Ssl2 uses this translocase mechanism during DNA repair rather than physically wedging open damaged DNA.

A fixed-point farrago

CERN Document Server

Shapiro, Joel H

2016-01-01

This text provides an introduction to some of the best-known fixed-point theorems, with an emphasis on their interactions with topics in analysis. The level of exposition increases gradually throughout the book, building from a basic requirement of undergraduate proficiency to graduate-level sophistication. Appendices provide an introduction to (or refresher on) some of the prerequisite material and exercises are integrated into the text, contributing to the volume’s ability to be used as a self-contained text. Readers will find the presentation especially useful for independent study or as a supplement to a graduate course in fixed-point theory. The material is split into four parts: the first introduces the Banach Contraction-Mapping Principle and the Brouwer Fixed-Point Theorem, along with a selection of interesting applications; the second focuses on Brouwer’s theorem and its application to John Nash’s work; the third applies Brouwer’s theorem to spaces of infinite dimension; and the fourth rests ...

48 CFR 1852.216-78 - Firm fixed price.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Firm fixed price. 1852.216... 1852.216-78 Firm fixed price. As prescribed in 1816.202-70, insert the following clause: Firm Fixed Price (DEC 1988) The total firm fixed price of this contract is $[Insert the appropriate amount]. (End...

46 CFR 28.260 - Electronic position fixing devices.

Science.gov (United States)

2010-10-01

... Trade § 28.260 Electronic position fixing devices. Each vessel 79 feet (24 meters) or more in length must be equipped with an electronic position fixing device capable of providing accurate fixes for the... 46 Shipping 1 2010-10-01 2010-10-01 false Electronic position fixing devices. 28.260 Section 28...

A common fixed point for operators in probabilistic normed spaces

International Nuclear Information System (INIS)

Ghaemi, M.B.; Lafuerza-Guillen, Bernardo; Razani, A.

2009-01-01

Probabilistic Metric spaces was introduced by Karl Menger. Alsina, Schweizer and Sklar gave a general definition of probabilistic normed space based on the definition of Menger [Alsina C, Schweizer B, Sklar A. On the definition of a probabilistic normed spaces. Aequationes Math 1993;46:91-8]. Here, we consider the equicontinuity of a class of linear operators in probabilistic normed spaces and finally, a common fixed point theorem is proved. Application to quantum Mechanic is considered.

Prosthetic rehabilitation using adhesive bridge and fixed-fixed bridge on the maxilla and telescopic crown overdenture on mandible

Directory of Open Access Journals (Sweden)

Indah Sulistiawaty

2016-12-01

Full Text Available Prosthetic rehabilitation is the rehabilitation process of masticatory and esthetics function for patients missing teeth and alveolar bone by means of manufacture and installation of dentures. The prosthetic rehabilitation commonly used include denture adhesive bridge, fixed-fixed bridge, as well as telescopic overdenture. Adhesive bridge is bridge denture consisting of single pontic and two retainer wings attached to the abutment using cement or resin. Fixed-fixed bridge is a bridge denture with rigid connectors on both ends of the pontics, whereas the telescopic crown Overdenture is a removable denture that uses linked precision on the original tooth in the form of primary coping on abutment and secondary coping on the denture. To expose the procedures of prosthetic rehabilitation using adhesive bridge and fixed-fixed bridge on the maxilla and telescopic crown Overdenture on mandible. Male patients aged 32 years came with complaints of difficulty to chew food because he had lost some teeth behind. In the maxilla, teeth are lost in the region of 15 and 16 performed by making the fixed-fixed bridge with abutment teeth 14 and 17. Loss of teeth in the region of 26, performed the manufacture of adhesive bridge with a box preparation on the occlusal 25 and 27. In the mandible, tooth loss in the region of 36,37,46, and 47 performed manufacture of telescopic crown Overdenture with primer coping on the teeth 35.38, 45, and 48 and the secondary coping on a metal frame. Prosthetic rehabilitation especially in the case of loss of back teeth is very important because with the denture patients can chew properly and maintain the stomatognathic system.

A new compact fixed-point blackbody furnace

International Nuclear Information System (INIS)

Hiraka, K.; Oikawa, H.; Shimizu, T.; Kadoya, S.; Kobayashi, T.; Yamada, Y.; Ishii, J.

2013-01-01

More and more NMIs are realizing their primary scale themselves with fixed-point blackbodies as their reference standard. However, commercially available fixed-point blackbody furnaces of sufficient quality are not always easy to obtain. CHINO Corp. and NMIJ, AIST jointly developed a new compact fixed-point blackbody furnace. The new furnace has such features as 1) improved temperature uniformity when compared to previous products, enabling better plateau quality, 2) adoption of the hybrid fixed-point cell structure with internal insulation to improve robustness and thereby to extend lifetime, 3) easily ejectable and replaceable heater unit and fixed-point cell design, leading to reduced maintenance cost, 4) interchangeability among multiple fixed points from In to Cu points. The replaceable cell feature facilitates long term maintenance of the scale through management of a group of fixed-point cells of the same type. The compact furnace is easily transportable and therefore can also function as a traveling standard for disseminating the radiation temperature scale, and for maintaining the scale at the secondary level and industrial calibration laboratories. It is expected that the furnace will play a key role of the traveling standard in the anticipated APMP supplementary comparison of the radiation thermometry scale

СURRENT TRENDS OF THE FIXED CAPITAL CONSUMPTION

Directory of Open Access Journals (Sweden)

Nikolay V. Gayfulin

2014-01-01

Full Text Available The research article is devoted to the current trends of the fixed capital consumption, to the problems connected with the fixed capital consumption and to the innovations in the Russian economy where the increase of fixed capital consumption efficiency is of the great importance. Under the conditions of the exchange relations formation and escalating competition only those commodity producers who can make the best use of all kinds of the resources will win. The fixed capital consumption efficiency is defined as a set of a measures which is taken by the economic entities. Some of a measures are partially described in this article. Nowadays the fixed capital consumption problem is connected with the performance enhancement and optimization of the fixed assets items.

Fixed points of quantum operations

International Nuclear Information System (INIS)

Arias, A.; Gheondea, A.; Gudder, S.

2002-01-01

Quantum operations frequently occur in quantum measurement theory, quantum probability, quantum computation, and quantum information theory. If an operator A is invariant under a quantum operation φ, we call A a φ-fixed point. Physically, the φ-fixed points are the operators that are not disturbed by the action of φ. Our main purpose is to answer the following question. If A is a φ-fixed point, is A compatible with the operation elements of φ? We shall show in general that the answer is no and we shall give some sufficient conditions under which the answer is yes. Our results will follow from some general theorems concerning completely positive maps and injectivity of operator systems and von Neumann algebras

Improved Landau gauge fixing and discretisation errors

International Nuclear Information System (INIS)

Bonnet, F.D.R.; Bowman, P.O.; Leinweber, D.B.; Richards, D.G.; Williams, A.G.

2000-01-01

Lattice discretisation errors in the Landau gauge condition are examined. An improved gauge fixing algorithm in which O(a 2 ) errors are removed is presented. O(a 2 ) improvement of the gauge fixing condition displays the secondary benefit of reducing the size of higher-order errors. These results emphasise the importance of implementing an improved gauge fixing condition

Fixed-point signal processing

CERN Document Server

Padgett, Wayne T

2009-01-01

This book is intended to fill the gap between the ""ideal precision"" digital signal processing (DSP) that is widely taught, and the limited precision implementation skills that are commonly required in fixed-point processors and field programmable gate arrays (FPGAs). These skills are often neglected at the university level, particularly for undergraduates. We have attempted to create a resource both for a DSP elective course and for the practicing engineer with a need to understand fixed-point implementation. Although we assume a background in DSP, Chapter 2 contains a review of basic theory

Fixed point theorems in spaces and -trees

Directory of Open Access Journals (Sweden)

Kirk WA

2004-01-01

Full Text Available We show that if is a bounded open set in a complete space , and if is nonexpansive, then always has a fixed point if there exists such that for all . It is also shown that if is a geodesically bounded closed convex subset of a complete -tree with , and if is a continuous mapping for which for some and all , then has a fixed point. It is also noted that a geodesically bounded complete -tree has the fixed point property for continuous mappings. These latter results are used to obtain variants of the classical fixed edge theorem in graph theory.

Age Dependent Differences in Collagen Alignment of Glutaraldehyde Fixed Bovine Pericardium

Science.gov (United States)

Sizeland, Katie H.; Wells, Hannah C.; Higgins, John; Cunanan, Crystal M.; Kirby, Nigel; Hawley, Adrian; Mudie, Stephen T.; Haverkamp, Richard G.

2014-01-01

Bovine pericardium is used for heart valve leaflet replacement where the strength and thinness are critical properties. Pericardium from neonatal animals (4–7 days old) is advantageously thinner and is considered as an alternative to that from adult animals. Here, the structures of adult and neonatal bovine pericardium tissues fixed with glutaraldehyde are characterized by synchrotron-based small angle X-ray scattering (SAXS) and compared with the mechanical properties of these materials. Significant differences are observed between adult and neonatal tissue. The glutaraldehyde fixed neonatal tissue has a higher modulus of elasticity (83.7 MPa) than adult pericardium (33.5 MPa) and a higher normalised ultimate tensile strength (32.9 MPa) than adult pericardium (19.1 MPa). Measured edge on to the tissue, the collagen in neonatal pericardium is significantly more aligned (orientation index (OI) 0.78) than that in adult pericardium (OI 0.62). There is no difference in the fibril diameter between neonatal and adult pericardium. It is shown that high alignment in the plane of the tissue provides the mechanism for the increased strength of the neonatal material. The superior strength of neonatal compared with adult tissue supports the use of neonatal bovine pericardium in heterografts. PMID:25295250

Newly-fixed carbon preferentially flows through starch in the unicellular alga Rhodella

International Nuclear Information System (INIS)

Kroen, W.K.; Ramus, J.S.

1989-01-01

Cells of the unicellular red alga Rhodella reticulata produce copious amounts of anionic extracellular polysaccharides. Previous experiments, comparing growing and non-growing cells, showed little difference in the pattern of initial 14 C partitioning, with a high percentage of label in starch. Short labelling periods, followed by chasing in unlabelled medium, showed rapid movement of carbon through the starch pool within the first 6 hrs, with an accompanying increase in both the protein and mucilage fractions. The overall pattern of carbon metabolism appears fixed throughout growth of the cells, with total carbon input changing with changing growth phase. As starch is extrachloroplastic in the red algae, input of fixed carbon directly into the starch pool may serve as a routing mechanism to direct subsequent carbon metabolism within the cell

Comparing topological charge definitions using topology fixing actions

International Nuclear Information System (INIS)

Bruckmann, Falk; Gruber, Florian; Jansen, Karl; Marinkovic, Marina; Urbach, Carsten; Wagner, Marc

2009-05-01

We investigate both the hyperbolic action and the determinant ratio action designed to fix the topological charge on the lattice. We show to what extent topology is fixed depending on the parameters of these actions, keeping the physical situation fixed. At the same time the agreement between different definitions of topological charge - the field theoretic and the index definition - is directly correlated to the degree topology is fixed. Moreover, it turns out that the two definitions agree very well. We also study finite volume effects arising in the static potential and related quantities due to topology fixing. (orig.)

Discussion on 'Solar detoxification of fuel-contaminated groundwater using fixed-bed photocatalysts'

Energy Technology Data Exchange (ETDEWEB)

Farrell, Joseph B.

1997-03-15

In a discussion of the 1997 paper by J. C. Crittenden et al. on the solar detoxification of fuel-contaminated groundwater using fixed-bed photocatalysts, the writer indicates a number of problems with the interpretation of the data and invites the authors to speculate on the reaction mechanism in the photocatalytic destruction of BTEX compounds in groundwater. In reply, Crittenden points out that it is not easy to speculate on the reaction mechanism because there are many compounds other than BTEX compounds contained in the water matrix, as well as many unknown compounds and by-products.

N2-fixing tropical legume evolution: a contributor to enhanced weathering through the Cenozoic?

Science.gov (United States)

Epihov, Dimitar Z; Batterman, Sarah A; Hedin, Lars O; Leake, Jonathan R; Smith, Lisa M; Beerling, David J

2017-08-16

Fossil and phylogenetic evidence indicates legume-rich modern tropical forests replaced Late Cretaceous palm-dominated tropical forests across four continents during the early Cenozoic (58-42 Ma). Tropical legume trees can transform ecosystems via their ability to fix dinitrogen (N 2 ) and higher leaf N compared with non-legumes (35-65%), but it is unclear how their evolutionary rise contributed to silicate weathering, the long-term sink for atmospheric carbon dioxide (CO 2 ). Here we hypothesize that the increasing abundance of N 2 -fixing legumes in tropical forests amplified silicate weathering rates by increased input of fixed nitrogen (N) to terrestrial ecosystems via interrelated mechanisms including increasing microbial respiration and soil acidification, and stimulating forest net primary productivity. We suggest the high CO 2 early Cenozoic atmosphere further amplified legume weathering. Evolution of legumes with high weathering rates was probably driven by their high demand for phosphorus and micronutrients required for N 2 -fixation and nodule formation. © 2017 The Author(s).

Apparatus producing constant cable tension for intermittent demand

Science.gov (United States)

Lauritzen, Ted

1985-01-01

The disclosed apparatus produces constant tension in superconducting electrical cable, or some other strand, under conditions of intermittent demand, as the cable is unreeled from a reel or reeled thereon. The apparatus comprises a pivotally supported swing frame on which the reel is rotatably supported, a rotary motor, a drive train connected between the motor and the reel and including an electrically controllable variable torque slip clutch, a servo transducer connected to the swing frame for producing servo input signals corresponding to the position thereof, a servo control system connected between the transducer and the clutch for regulating the torque transmitted by the clutch to maintain the swing frame in a predetermined position, at least one air cylinder connected to the swing frame for counteracting the tension in the cable, and pressure regulating means for supplying a constant air pressure to the cylinder to establish the constant tension in the cable, the servo system and the clutch being effective to produce torque on the reel in an amount sufficient to provide tension in the cable corresponding to the constant force exerted by the air cylinder. The drive train also preferably includes a fail-safe brake operable to its released position by electrical power in common with the servo system, for preventing rotation of the reel if there is a power failure. A shock absorber and biasing springs may also be connected to the swing frame, such springs biasing the frame toward its predetermined position. The tension in the cable may be measured by force measuring devices engageable with the bearings for the reel shaft, such bearings being supported for slight lateral movement. The reel shaft is driven by a Shmidt coupler which accommodates such movement.

Apparatus producing constant cable tension for intermittent demand

International Nuclear Information System (INIS)

Lauritzen, T.

1985-01-01

The disclosed apparatus produces constant tension in superconducting electrical cable, or some other strand, under conditions of intermittent demand, as the cable is unreeled from a reel or reeled thereon. The apparatus comprises a pivotally supported swing frame on which the reel is rotatably supported, a rotary motor, a drive train connected between the motor and the reel and including an electrically controllable variable torque slip clutch, a servo transducer connected to the swing frame for producing servo input signals corresponding to the position thereof, a servo control system connected between the transducer and the clutch for regulating the torque transmitted by the clutch to maintain the swing frame in a predetermined position, at least one air cylinder connected to the swing frame for counteracting the tension in the cable, and pressure regulating means for supplying a constant air pressure to the cylinder to establish the constant tension in the cable, the servo system and the clutch being effective to produce torque on the reel in an amount sufficient to provide tension in the cable corresponding to the constant force exerted by the air cylinder. The drive train also preferably includes a fail-safe brake operable to its released position by electrical power in common with the servo system, for preventing rotation of the reel if there is a power failure. A shock absorber and biasing springs may also be connected to the swing frame, such springs biasing the frame toward its predetermined position. The tension in the cable may be measured by force measuring devices engageable with the bearings for the reel shaft, such bearings being supported for slight lateral movement. The reel shaft is driven by a Shmidt coupler which accommodates such movement

The price of fixed income market volatility

CERN Document Server

Mele, Antonio

2015-01-01

Fixed income volatility and equity volatility evolve heterogeneously over time, co-moving disproportionately during periods of global imbalances and each reacting to events of different nature. While the methodology for options-based "model-free" pricing of equity volatility has been known for some time, little is known about analogous methodologies for pricing various fixed income volatilities. This book fills this gap and provides a unified evaluation framework of fixed income volatility while dealing with disparate markets such as interest-rate swaps, government bonds, time-deposits and credit. It develops model-free, forward looking indexes of fixed-income volatility that match different quoting conventions across various markets, and uncovers subtle yet important pitfalls arising from naïve superimpositions of the standard equity volatility methodology when pricing various fixed income volatilities. The ultimate goal of the authors´ efforts is to make interest rate volatility standardization a valuable...

47 CFR 101.85 - Transition of the 18.3-19.3 GHz band from the terrestrial fixed services to the fixed-satellite...

Science.gov (United States)

2010-10-01

... terrestrial fixed services to the fixed-satellite service (FSS). 101.85 Section 101.85 Telecommunication... Transition of the 18.3-19.3 GHz band from the terrestrial fixed services to the fixed-satellite service (FSS...-satellite service (FSS). The rules in this section provide for a transition period during which FSS...

Common fixed points for weakly compatible maps

Indian Academy of Sciences (India)

Springer Verlag Heidelberg #4 2048 1996 Dec 15 10:16:45

In 1976, Jungck [4] proved a common fixed point theorem for commuting maps generalizing the Banach's fixed point theorem, which states that, 'let (X, d) be a complete metric space. If T satisfies d(Tx,Ty) ≤ kd(x,y) for each x,y ∈ X where 0 ≤ k < 1, then T has a unique fixed point in X'. This theorem has many applications, ...

Analytical mechanics for relativity and quantum mechanics

CERN Document Server

Johns, Oliver Davis

2011-01-01

Analytical Mechanics for Relativity and Quantum Mechanics is an innovative and mathematically sound treatment of the foundations of analytical mechanics and the relation of classical mechanics to relativity and quantum theory. It is intended for use at the introductory graduate level. A distinguishing feature of the book is its integration of special relativity into teaching of classical mechanics. After a thorough review of the traditional theory, Part II of the book introduces extended Lagrangian and Hamiltonian methods that treat time as a transformable coordinate rather than the fixed parameter of Newtonian physics. Advanced topics such as covariant Langrangians and Hamiltonians, canonical transformations, and Hamilton-Jacobi methods are simplified by the use of this extended theory. And the definition of canonical transformation no longer excludes the Lorenz transformation of special relativity. This is also a book for those who study analytical mechanics to prepare for a critical exploration of quantum...

Band gap and defect states of MgO thin films investigated using reflection electron energy loss spectroscopy

Directory of Open Access Journals (Sweden)

Sung Heo

2015-07-01

Full Text Available The band gap and defect states of MgO thin films were investigated by using reflection electron energy loss spectroscopy (REELS and high-energy resolution REELS (HR-REELS. HR-REELS with a primary electron energy of 0.3 keV revealed that the surface F center (FS energy was located at approximately 4.2 eV above the valence band maximum (VBM and the surface band gap width (EgS was approximately 6.3 eV. The bulk F center (FB energy was located approximately 4.9 eV above the VBM and the bulk band gap width was about 7.8 eV, when measured by REELS with 3 keV primary electrons. From a first-principles calculation, we confirmed that the 4.2 eV and 4.9 eV peaks were FS and FB, induced by oxygen vacancies. We also experimentally demonstrated that the HR-REELS peak height increases with increasing number of oxygen vacancies. Finally, we calculated the secondary electron emission yields (γ for various noble gases. He and Ne were not influenced by the defect states owing to their higher ionization energies, but Ar, Kr, and Xe exhibited a stronger dependence on the defect states owing to their small ionization energies.

Fixed-Rate Compressed Floating-Point Arrays.

Science.gov (United States)

Lindstrom, Peter

2014-12-01

Current compression schemes for floating-point data commonly take fixed-precision values and compress them to a variable-length bit stream, complicating memory management and random access. We present a fixed-rate, near-lossless compression scheme that maps small blocks of 4(d) values in d dimensions to a fixed, user-specified number of bits per block, thereby allowing read and write random access to compressed floating-point data at block granularity. Our approach is inspired by fixed-rate texture compression methods widely adopted in graphics hardware, but has been tailored to the high dynamic range and precision demands of scientific applications. Our compressor is based on a new, lifted, orthogonal block transform and embedded coding, allowing each per-block bit stream to be truncated at any point if desired, thus facilitating bit rate selection using a single compression scheme. To avoid compression or decompression upon every data access, we employ a software write-back cache of uncompressed blocks. Our compressor has been designed with computational simplicity and speed in mind to allow for the possibility of a hardware implementation, and uses only a small number of fixed-point arithmetic operations per compressed value. We demonstrate the viability and benefits of lossy compression in several applications, including visualization, quantitative data analysis, and numerical simulation.

The computation of fixed points and applications

CERN Document Server

Todd, Michael J

1976-01-01

Fixed-point algorithms have diverse applications in economics, optimization, game theory and the numerical solution of boundary-value problems. Since Scarf's pioneering work [56,57] on obtaining approximate fixed points of continuous mappings, a great deal of research has been done in extending the applicability and improving the efficiency of fixed-point methods. Much of this work is available only in research papers, although Scarf's book [58] gives a remarkably clear exposition of the power of fixed-point methods. However, the algorithms described by Scarf have been super~eded by the more sophisticated restart and homotopy techniques of Merrill [~8,~9] and Eaves and Saigal [1~,16]. To understand the more efficient algorithms one must become familiar with the notions of triangulation and simplicial approxi- tion, whereas Scarf stresses the concept of primitive set. These notes are intended to introduce to a wider audience the most recent fixed-point methods and their applications. Our approach is therefore ...

Fixed point theory in metric type spaces

CERN Document Server

Agarwal, Ravi P; O’Regan, Donal; Roldán-López-de-Hierro, Antonio Francisco

2015-01-01

Written by a team of leading experts in the field, this volume presents a self-contained account of the theory, techniques and results in metric type spaces (in particular in G-metric spaces); that is, the text approaches this important area of fixed point analysis beginning from the basic ideas of metric space topology. The text is structured so that it leads the reader from preliminaries and historical notes on metric spaces (in particular G-metric spaces) and on mappings, to Banach type contraction theorems in metric type spaces, fixed point theory in partially ordered G-metric spaces, fixed point theory for expansive mappings in metric type spaces, generalizations, present results and techniques in a very general abstract setting and framework. Fixed point theory is one of the major research areas in nonlinear analysis. This is partly due to the fact that in many real world problems fixed point theory is the basic mathematical tool used to establish the existence of solutions to problems which arise natur...

Algorithms for solving common fixed point problems

CERN Document Server

Zaslavski, Alexander J

2018-01-01

This book details approximate solutions to common fixed point problems and convex feasibility problems in the presence of perturbations. Convex feasibility problems search for a common point of a finite collection of subsets in a Hilbert space; common fixed point problems pursue a common fixed point of a finite collection of self-mappings in a Hilbert space. A variety of algorithms are considered in this book for solving both types of problems, the study of which has fueled a rapidly growing area of research. This monograph is timely and highlights the numerous applications to engineering, computed tomography, and radiation therapy planning. Totaling eight chapters, this book begins with an introduction to foundational material and moves on to examine iterative methods in metric spaces. The dynamic string-averaging methods for common fixed point problems in normed space are analyzed in Chapter 3. Dynamic string methods, for common fixed point problems in a metric space are introduced and discussed in Chapter ...

78 FR 20705 - Fixed Income Roundtable

Science.gov (United States)

2013-04-05

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-69275; File No. 4-660] Fixed Income Roundtable... of fixed income markets. The roundtable will focus on the municipal securities, corporate bonds, and asset-backed securities markets. The roundtable discussion will be held in the multi-purpose room of the...

Mining Repair Actions for Guiding Automated Program Fixing

OpenAIRE

Martinez , Matias; Monperrus , Martin

2012-01-01

Automated program fixing consists of generating source code in order to fix bugs in an automated manner. Our intuition is that automated program fixing can imitate human-based program fixing. Hence, we present a method to mine repair actions from software repositories. A repair action is a small semantic modification on code such as adding a method call. We then decorate repair actions with a probability distribution also learnt from software repositories. Our probabilistic repair models enab...

48 CFR 16.202 - Firm-fixed-price contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Firm-fixed-price contracts. 16.202 Section 16.202 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 16.202 Firm-fixed-price...

Precise Point Positioning with Partial Ambiguity Fixing.

Science.gov (United States)

Li, Pan; Zhang, Xiaohong

2015-06-10

Reliable and rapid ambiguity resolution (AR) is the key to fast precise point positioning (PPP). We propose a modified partial ambiguity resolution (PAR) method, in which an elevation and standard deviation criterion are first used to remove the low-precision ambiguity estimates for AR. Subsequently the success rate and ratio-test are simultaneously used in an iterative process to increase the possibility of finding a subset of decorrelated ambiguities which can be fixed with high confidence. One can apply the proposed PAR method to try to achieve an ambiguity-fixed solution when full ambiguity resolution (FAR) fails. We validate this method using data from 450 stations during DOY 021 to 027, 2012. Results demonstrate the proposed PAR method can significantly shorten the time to first fix (TTFF) and increase the fixing rate. Compared with FAR, the average TTFF for PAR is reduced by 14.9% for static PPP and 15.1% for kinematic PPP. Besides, using the PAR method, the average fixing rate can be increased from 83.5% to 98.2% for static PPP, from 80.1% to 95.2% for kinematic PPP respectively. Kinematic PPP accuracy with PAR can also be significantly improved, compared to that with FAR, due to a higher fixing rate.

Vilified and Fixed

DEFF Research Database (Denmark)

Jensen, Thessa; Westberg, Lysa

, and imbalances of power between scholars and journalists on one side, and fans on the other are not rare occurrences. An analysis of a number of recent news articles, scholarly works, and websites, shows how the attempt of fixing fandom still prevails. Like Said's view on how the Orient is treated, fandom...... and tween website", 'Teen' managed to outrage fans. It took days and hundreds of comments, tweets, and mails to the publishers, before the article was taken down. Vilification in scholarly works and the media may have significantly lessened in recent years. Still, misunderstandings, applied exoticism...... is similarly exotisised, incorporated, and fixed. Scholars explain how to become better fans, attempting authority over fandom by applying rules to a culture, which already has their own. This, the notion of the 'better fan', devalues the existing discourses, rules, and traditions within fandom. The expert...

Magnetic Fixed Points and Emergent Supersymmetry

DEFF Research Database (Denmark)

Antipin, Oleg; Mojaza, Matin; Pica, Claudio

2013-01-01

We establish in perturbation theory the existence of fixed points along the renormalization group flow for QCD with an adjoint Weyl fermion and scalar matter reminiscent of magnetic duals of QCD [1-3]. We classify the fixed points by analyzing their basin of attraction. We discover that among...

Expression of TGF-β in Fractures Fixed by Nitinol Swan-like Memory Compressive Connectors

Science.gov (United States)

Li, M.; Zhang, C. C.; Xu, S. G.; Fu, Q. G.

2011-07-01

In this article, the effect of internal fixation of a Nitinol swan-like memory compressive connector (SMC) on the temporal expression of transforming growth factor-β (TGF-β) at fracture sites is evaluated. Specimens were collected from 35 New Zealand rabbits modeled for bilateral humeral fracture fixed with either SMC or stainless dynamic compression plate (DCP). Five rabbits each were killed at day 1, 3, 7, 14, 21, 28, and 56. The local positive staining potency, positive area ratio, and positive index of TGF-β were measured using an immunohistochemistry approach (EnVision) in combination with a computerized image analysis system. TGF-β staining was seen in mesenchymal cells, osteoblasts, chondrocytes, and in the extracellular matrix of fractures fixed in both the SMC and the DCP samples without a significant difference in staining at both the early stages (days 1 and 3) and day 56. A higher TGF-β content was observed in the fractures fixed with SMC when compared to that of DCP from day 7 to 28. As a conclusion, TGF-β is highly expressed in fractures fixed with SMC during chondrogenesis stage and entochondrostosis stage. Finally, the mechanism of how SMC promoting synthesis and secretion of TGF-β in the process of fracture healing has been discussed.

Adhesives for fixed orthodontic bands.

Science.gov (United States)

Millett, Declan T; Glenny, Anne-Marie; Mattick, Rye Cr; Hickman, Joy; Mandall, Nicky A

2016-10-25

Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors

Wall shear stress fixed points in blood flow

Science.gov (United States)

Arzani, Amirhossein; Shadden, Shawn

2017-11-01

Patient-specific computational fluid dynamics produces large datasets, and wall shear stress (WSS) is one of the most important parameters due to its close connection with the biological processes at the wall. While some studies have investigated WSS vectorial features, the WSS fixed points have not received much attention. In this talk, we will discuss the importance of WSS fixed points from three viewpoints. First, we will review how WSS fixed points relate to the flow physics away from the wall. Second, we will discuss how certain types of WSS fixed points lead to high biochemical surface concentration in cardiovascular mass transport problems. Finally, we will introduce a new measure to track the exposure of endothelial cells to WSS fixed points.

THE Economics of Match-Fixing

OpenAIRE

Caruso, Raul

2007-01-01

The phenomenon of match-fixing does constitute a constant element of sport contests. This paper presents a simple formal model in order to explain it. The intuition behind is that an asymmetry in the evaluation of the stake is the key factor leading to match-fixing. In sum, this paper considers a partial equilibrium model of contest where two asymmetric, rational and risk-neutral opponents evaluate differently a contested stake. Differently from common contest models, agents have the option ...

An oceanic fixed nitrogen sink exceeding 400 Tg N a−1 vs the concept of homeostasis in the fixed-nitrogen inventory

Directory of Open Access Journals (Sweden)

L. A. Codispoti

2007-01-01

Full Text Available Measurements of the N2 produced by denitrification, a better understanding of non-canonical pathways for N2 production such as the anammox reaction, better appreciation of the multiple environments in which denitrification can occur (e.g. brine pockets in ice, within particles outside of suboxic water, etc. suggest that it is unlikely that the oceanic denitrification rate is less than 400 Tg N a−1. Because this sink term far exceeds present estimates for nitrogen fixation, the main source for oceanic fixed-N, there is a large apparent deficit (~200 Tg N a−1 in the oceanic fixed-N budget. The size of the deficit appears to conflict with apparent constraints of the atmospheric carbon dioxide and sedimentary δ15N records that suggest homeostasis during the Holocene. In addition, the oceanic nitrate/phosphate ratio tends to be close to the canonical Redfield biological uptake ratio of 16 (by N and P atoms which can be interpreted to indicate the existence of a powerful feed-back mechanism that forces the system towards a balance. The main point of this paper is that one cannot solve this conundrum by reducing the oceanic sink term. To do so would violate an avalanche of recent data on oceanic denitrification. A solution to this problem may be as simple as an upwards revision of the oceanic nitrogen fixation rate, and it is noted that most direct estimates for this term have concentrated on nitrogen fixation by autotrophs in the photic zone, even though nitrogen fixing genes are widespread. Another simple explanation may be that we are simply no longer in the Holocene and one might expect to see temporary imbalances in the oceanic fixed-N budget as we transition from the Holocene to the Anthropocene in line with an apparent denitrification maximum during the Glacial-Holocene transition. Other possible full or partial explanations involve plausible changes in the oceanic nitrate/phosphate and N/C ratios, an oceanic phosphorus budget that may also

Reinforcement of a PMMA resin for fixed interim prostheses with nanodiamonds.

Science.gov (United States)

Protopapa, Popi; Kontonasaki, Eleana; Bikiaris, Dimitrios; Paraskevopoulos, Konstantinos M; Koidis, Petros

2011-01-01

The aim of this study was to investigate the possible reinforcement of Nanodiamonds (ND) in a PMMA resin for fixed interim restorations. The fracture toughness (K(Ic)), impact strength and the dynamic thermomechanical properties (T(g), E´, E´´, tanδ) of a series of PMMA-ND nanocomposites with different amounts of ND were evaluated. The fracture toughness increased as the ND percentage increased up to 0.38% wt but a greater amount of ND induced a decrease in K(Ic). Impact strength and Young's modulus were also increased by increasing nanoparticles content, indicating the reinforcing effect of ND. Dynamic mechanical properties were also affected. By increasing the ND content an increase of storage modulus was recorded, while glass transition was shifted at higher temperatures. Under the limitations of this study, it can be suggested that reinforcing PMMA with ND nanoparticles -especially at low concentrations- may increase the overall performance of fixed interim prostheses.

Superficial Collagen Fibril Modulus and Pericellular Fixed Charge Density Modulate Chondrocyte Volumetric Behaviour in Early Osteoarthritis

Directory of Open Access Journals (Sweden)

Petri Tanska

2013-01-01

Full Text Available The aim of this study was to investigate if the experimentally detected altered chondrocyte volumetric behavior in early osteoarthritis can be explained by changes in the extracellular and pericellular matrix properties of cartilage. Based on our own experimental tests and the literature, the structural and mechanical parameters for normal and osteoarthritic cartilage were implemented into a multiscale fibril-reinforced poroelastic swelling model. Model simulations were compared with experimentally observed cell volume changes in mechanically loaded cartilage, obtained from anterior cruciate ligament transected rabbit knees. We found that the cell volume increased by 7% in the osteoarthritic cartilage model following mechanical loading of the tissue. In contrast, the cell volume decreased by 4% in normal cartilage model. These findings were consistent with the experimental results. Increased local transversal tissue strain due to the reduced collagen fibril stiffness accompanied with the reduced fixed charge density of the pericellular matrix could increase the cell volume up to 12%. These findings suggest that the increase in the cell volume in mechanically loaded osteoarthritic cartilage is primarily explained by the reduction in the pericellular fixed charge density, while the superficial collagen fibril stiffness is suggested to contribute secondarily to the cell volume behavior.

12 CFR 701.36 - FCU ownership of fixed assets.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false FCU ownership of fixed assets. 701.36 Section... ORGANIZATION AND OPERATION OF FEDERAL CREDIT UNIONS § 701.36 FCU ownership of fixed assets. (a) Investment in Fixed Assets. (1) No Federal credit union with $1,000,000 or more in assets may invest in any fixed...

Coupling of a real time computer to nuclear detectors systems; Couplage d'un calculateur en temps reel a un ensemble experimental de detection

Energy Technology Data Exchange (ETDEWEB)

Lugol, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-06-01

Electronic computers are now included in nuclear physics experiment systems. This corresponds to a general trend to replace conventional multichannel analyzers by on line, real time, computers. An one line computer performing nuclear data acquisition and storage, offers the advantage of reduction and calculation routines in real time. This advantage becomes a need when the number of experimental parameters increase. At the Saclay variable energy cyclotron we have connected a C 90-10 computer of C.I.I. We describe the input/output hardware features. In order to establish a dialogue with physicists, we have built a main display unit able to control many display consoles at different points: we describe them as well as some utility routines. (author) [French] Les experiences de physique nucleaire font appel, de plus en plus, a des calculateurs electroniques. Ceux-ci se substituent alors aux analyseurs multicanaux traditionnels. Un calculateur en ligne assurant l'acquisition et le stockage des donnees experimentales, presente l'avantage de pouvoir executer, en temps reel, des programmes simples de calcul et de reduction. Nous montrons la necessite de prise en charge, par un calculateur, des experiences de physique nucleaire ou le nombre des parametres experimentaux devient important. Au cyclotron a energie variable de Saclay, la solution retenue est l'emploi d'un calculateur C 90-10 de la C.I.I. Nous decrivons les interfaces necessaires au couplage. Afin d'assurer un dialogue avec les physiciens, un systeme de visualisation est realise; nous le decrivons ainsi que quelques programmes types d'utilisation de l'ensemble du systeme. (auteur)

Fixed points of quantum gravity in extra dimensions

International Nuclear Information System (INIS)

Fischer, Peter; Litim, Daniel F.

2006-01-01

We study quantum gravity in more than four dimensions with renormalisation group methods. We find a non-trivial ultraviolet fixed point in the Einstein-Hilbert action. The fixed point connects with the perturbative infrared domain through finite renormalisation group trajectories. We show that our results for fixed points and related scaling exponents are stable. If this picture persists at higher order, quantum gravity in the metric field is asymptotically safe. We discuss signatures of the gravitational fixed point in models with low scale quantum gravity and compact extra dimensions

Internal audit of costs on fixed assets repair

Directory of Open Access Journals (Sweden)

M.Yu. Samchyk

2016-12-01

Full Text Available The article focuses on the approaches to the process and methods of expenditure audit on repair and modernization of fixed assets and the author considers that there is no single approach to understanding the issue. The author improves the organizational and methodological support of internal audit of expenditures on the fixed assets repair and modernization that forms the accurate information for management repair and modernization of fixed assets. The paper specifies the goals and objectives of internal expenditures on repair and modernization of fixed assets, depending on the sources of such facilities to the company, allowing the author to determine the documentary control methods to be applied by an auditor to perform each task. The article determines the areas of risk components of internal control that can lead to ineffective implementation of authority by officials of an enterprise in the process of fixed assets repair, which can cause inefficient use of resources and, consequently, decrease in the efficiency of the work of fixed assets repair and modernization. The author proposes the list of auditor’s questions to assess the internal control system in the repair of fixed assets and these questions will help identify the significant drawbacks of control means.

The danger of fixed drug combinations.

Science.gov (United States)

Herxheimer, H

1975-07-01

After the second world war a number of pharmaceutical firms which were not able to create new therapeutic substances by their own research, put a great number of fixed drug combinations on the market. Their number quickly increased, as the efficiency of these compounds required no legal proof and as, with appropriate propaganda, large profits could be earned. The number of firms doing this sort of production also increased, and in West Germany, for instance, more than 3/4 of all drugs on the official list are now fixed combinations. Our task is, therefore, to ask for regulations which limit fixed combinations to such preparation the efficiency of which has been shown and whose advantages more than outweigh their disadvantages. The advantages of these preparations are convenience to the patient, avoidance of potential mistakes made possible by too many drugs given on the same day and, perhaps, lower prices. The disadvantages are: 1. The individual optimum dose for a patient cannot be achieved, because in case of a change of dosis all components are changed. 2. Different components may have different duration of action. 3. Different components may have a different bioavailability. 4. Different components may interact. 5. Some components may create tolerance, others not. In many cases fixed combinations have been used to make drugs with poor efficiency financially viable by combining them with very efficient drugs. The existence of thousands of fixed combinations makes the drug market indiscernible and useless. They obscure the relatively few essential drugs and make it difficult for the doctor to find his way amongst the mass of offered medicaments. Few fixed combinations are justifiable. These are well known and they should be permitted as before. All others should be banned until it has been shown that their advantages are greater than their disadvantages.

33 CFR 118.65 - Lights on fixed bridges.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights on fixed bridges. 118.65 Section 118.65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.65 Lights on fixed bridges. (a) Each fixed bridge span over a navigable...

48 CFR 52.243-1 - Changes-Fixed-Price.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Changes-Fixed-Price. 52....243-1 Changes—Fixed-Price. As prescribed in 43.205(e), insert the following clause: Changes—Fixed-Price (AUG 1987) (a) The Contracting Officer may at any time, by written order, and without notice to...

Fixed-site physical protection system modeling

International Nuclear Information System (INIS)

Chapman, L.D.

1975-01-01

An evaluation of a fixed-site safeguard security system must consider the interrelationships of barriers, alarms, on-site and off-site guards, and their effectiveness against a forcible adversary attack whose intention is to create an act of sabotage or theft. A computer model has been developed at Sandia Laboratories for the evaluation of alternative fixed-site security systems. Trade-offs involving on-site and off-site response forces and response times, perimeter alarm systems, barrier configurations, and varying levels of threat can be analyzed. The computer model provides a framework for performing inexpensive experiments on fixed-site security systems for testing alternative decisions, and for determining the relative cost effectiveness associated with these decision policies

The 1994 Fermilab Fixed Target Program

International Nuclear Information System (INIS)

Conrad, J.

1994-11-01

This paper highlights the results of the Fermilab Fixed Target Program that were announced between October, 1993 and October, 1994. These results are drawn from 18 experiments that took data in the 1985, 1987 and 1990/91 fixed target running periods. For this discussion, the Fermilab Fixed Target Program is divided into 5 major topics: hadron structure, precision electroweak measurements, heavy quark production, polarization and magnetic moments, and searches for new phenomena. However, it should be noted that most experiments span several subtopics. Also, measurements within each subtopic often affect the results in other subtopics. For example, parton distributions from hadron structure measurements are used in the studies of heavy quark production

Charm and beauty measurements at Fermilab fixed target

International Nuclear Information System (INIS)

Mishra, C.S.

1993-10-01

Eighteen months after a successful run of the Fermilab fixed target program, interesting results from several experiments are available. This is the first time that more than one Fermilab fixed target experiment has reported the observation of beauty mesons. In this paper we review recent results from charm and beauty fixed target experiments at Fermilab

Clinical Effectiveness of Using Aesthetic Fixed Prosthetic Appliances with Combined Occlusal Surface

Directory of Open Access Journals (Sweden)

Andrii Biben

2017-06-01

Conclusions. Aesthetic fixed prosthetic appliances with combined occlusal surface demonstrated high functional and aesthetic characteristics. The use of the USHPS system showed a decisive advantage of milled frameworks and combined occlusal surface over traditional cast ceramic frameworks.The combination of high mechanical, strength and tribological properties of zirconium dioxide and high biological as well as aesthetic properties of ceramic materials helped reveal high clinical characteristics of aesthetic appliances with combined occlusal surface.

Floating-to-Fixed-Point Conversion for Digital Signal Processors

Directory of Open Access Journals (Sweden)

Menard Daniel

2006-01-01

Full Text Available Digital signal processing applications are specified with floating-point data types but they are usually implemented in embedded systems with fixed-point arithmetic to minimise cost and power consumption. Thus, methodologies which establish automatically the fixed-point specification are required to reduce the application time-to-market. In this paper, a new methodology for the floating-to-fixed point conversion is proposed for software implementations. The aim of our approach is to determine the fixed-point specification which minimises the code execution time for a given accuracy constraint. Compared to previous methodologies, our approach takes into account the DSP architecture to optimise the fixed-point formats and the floating-to-fixed-point conversion process is coupled with the code generation process. The fixed-point data types and the position of the scaling operations are optimised to reduce the code execution time. To evaluate the fixed-point computation accuracy, an analytical approach is used to reduce the optimisation time compared to the existing methods based on simulation. The methodology stages are described and several experiment results are presented to underline the efficiency of this approach.

Floating-to-Fixed-Point Conversion for Digital Signal Processors

Science.gov (United States)

Menard, Daniel; Chillet, Daniel; Sentieys, Olivier

2006-12-01

Digital signal processing applications are specified with floating-point data types but they are usually implemented in embedded systems with fixed-point arithmetic to minimise cost and power consumption. Thus, methodologies which establish automatically the fixed-point specification are required to reduce the application time-to-market. In this paper, a new methodology for the floating-to-fixed point conversion is proposed for software implementations. The aim of our approach is to determine the fixed-point specification which minimises the code execution time for a given accuracy constraint. Compared to previous methodologies, our approach takes into account the DSP architecture to optimise the fixed-point formats and the floating-to-fixed-point conversion process is coupled with the code generation process. The fixed-point data types and the position of the scaling operations are optimised to reduce the code execution time. To evaluate the fixed-point computation accuracy, an analytical approach is used to reduce the optimisation time compared to the existing methods based on simulation. The methodology stages are described and several experiment results are presented to underline the efficiency of this approach.

Charm and beauty measurements at Fermilab fixed target

International Nuclear Information System (INIS)

Mishra, C.S.

1993-01-01

Eighteen months after a successful run of the Fermilab fixed target program, interesting results from several experiments are available. This is the first time that more than one Fermilab fixed target experiment has reported the observation of beauty mesons. In this paper the author reviews recent results from charm and beauty fixed target experiments at Fermilab

About Applications of the Fixed Point Theory

Directory of Open Access Journals (Sweden)

Bucur Amelia

2017-06-01

Full Text Available The fixed point theory is essential to various theoretical and applied fields, such as variational and linear inequalities, the approximation theory, nonlinear analysis, integral and differential equations and inclusions, the dynamic systems theory, mathematics of fractals, mathematical economics (game theory, equilibrium problems, and optimisation problems and mathematical modelling. This paper presents a few benchmarks regarding the applications of the fixed point theory. This paper also debates if the results of the fixed point theory can be applied to the mathematical modelling of quality.

Hybrid fixed point in CAT(0 spaces

Directory of Open Access Journals (Sweden)

Hemant Kumar Pathak

2018-02-01

Full Text Available In this paper, we introduce an ultrapower approach to prove fixed point theorems for $H^{+}$-nonexpansive multi-valued mappings in the setting of CAT(0 spaces and prove several hybrid fixed point results in CAT(0 spaces for families of single-valued nonexpansive or quasinonexpansive mappings and multi-valued upper semicontinuous, almost lower semicontinuous or $H^{+}$-nonexpansive mappings which are weakly commuting. We also establish a result about structure of the set of fixed points of $H^{+}$-quasinonexpansive mapping on a CAT(0 space.

The Analysis of Electrical Energy Consumption of the Impact Screwdriver During Assembly of Fixed Threaded Joints

Science.gov (United States)

Grinevich, I.; Nikishin, Vl.; Mozga, N.; Laitans, M.

2017-06-01

The paper deals with the possibilities of reducing the consumption of electrical energy of the impact screwdriver during the assembly of fixed threaded joints. The recommendations related to a decrease in electrical energy consumption would allow reducing product costs but so far there have been no such recommendations from the producers of the tool as to the effective operating regimes of the impact screwdrivers in relation to electrical energy consumption and necessary tightening moment of the nut. The aim of the study is to find out the economical operating mode of the electrical impact screwdriver when assembling fixed threaded joints. By varying the set speed of the rotor head and working time of the impact mechanism, there is an opportunity to determine electrical energy consumption of the tool for the given tightening moment. The results of the experiment show that at the same tightening moment obtained the electrical energy consumption of the impact screwdriver is less at a higher starting set speed of the rotor head but shorter operating time of the impact mechanism than at a lower speed of the rotor head and longer operating time of the impact mechanism.

Differences in Tribological Behaviors upon Switching Fixed and Moving Materials of Tribo-pairs including Metal and Polymer.

Science.gov (United States)

Xu, Aijie; Tian, Pengyi; Wen, Shizhu; Guo, Fei; Hu, Yueqiang; Jia, Wenpeng; Dong, Conglin; Tian, Yu

2017-10-12

The coefficient of friction (COF) between two materials is usually believed to be an intrinsic property of the materials themselves. In this study, metals of stainless steel (304) and brass (H62), and polymers of polypropylene (PP) and polytetrafluoroethylene (PTFE) were tested on a standard ball-on-three-plates test machine. Significantly different tribological behaviors were observed when fixed and moving materials of tribo-pairs (metal/polymer) were switched. As an example, under the same applied load and rotating speed, the COF (0.49) between a rotating PP ball and three fixed H62 plates was approximately 2.3 times higher than that between switched materials of tribo-pairs. Meanwhile, the COF between H62 and PTFE was relatively stable. The unexpected tribological behaviors were ascribed to the thermal and mechanical properties of tribo-pairs. Theoretical analysis revealed that the differences in the maximum local temperature between switching the fixed and moving materials of tribo-pairs were consistent with the differences in the tested COF. This result indicated the precise prediction of the COF of two materials is complexcity, and that thermal and mechanical properties should be properly considered in designing tribo-pairs, because these properties may significantly affect tribological performance.

Contamination effects on fixed-bias Langmuir probes

Energy Technology Data Exchange (ETDEWEB)

Steigies, C. T. [Institut fuer Experimentelle und Angewandte Physik, Christian-Albrechts-Universitaet zu Kiel, 24098 Kiel (Germany); Barjatya, A. [Department of Physical Sciences, Embry-Riddle Aeronautical University, Daytona Beach, Florida 32114 (United States)

2012-11-15

Langmuir probes are standard instruments for plasma density measurements on many sounding rockets. These probes can be operated in swept-bias as well as in fixed-bias modes. In swept-bias Langmuir probes, contamination effects are frequently visible as a hysteresis between consecutive up and down voltage ramps. This hysteresis, if not corrected, leads to poorly determined plasma densities and temperatures. With a properly chosen sweep function, the contamination parameters can be determined from the measurements and correct plasma parameters can then be determined. In this paper, we study the contamination effects on fixed-bias Langmuir probes, where no hysteresis type effect is seen in the data. Even though the contamination is not evident from the measurements, it does affect the plasma density fluctuation spectrum as measured by the fixed-bias Langmuir probe. We model the contamination as a simple resistor-capacitor circuit between the probe surface and the plasma. We find that measurements of small scale plasma fluctuations (meter to sub-meter scale) along a rocket trajectory are not affected, but the measured amplitude of large scale plasma density variation (tens of meters or larger) is attenuated. From the model calculations, we determine amplitude and cross-over frequency of the contamination effect on fixed-bias probes for different contamination parameters. The model results also show that a fixed bias probe operating in the ion-saturation region is affected less by contamination as compared to a fixed bias probe operating in the electron saturation region.

Fixed target beams

CERN Document Server

Kain, V; Cettour-Cave, S; Cornelis, K; Fraser, M A; Gatignon, L; Goddard, B; Velotti, F

2017-01-01

The CERN SPS (Super Proton Synchrotron) serves asLHC injector and provides beam for the North Area fixedtarget experiments. At low energy, the vertical acceptancebecomes critical with high intensity large emittance fixed tar-get beams. Optimizing the vertical available aperture is a keyingredient to optimize transmission and reduce activationaround the ring. During the 2016 run a tool was developed toprovide an automated local aperture scan around the entirering.The flux of particles slow extracted with the1/3inte-ger resonance from the Super Proton Synchrotron at CERNshould ideally be constant over the length of the extractionplateau, for optimum use of the beam by the fixed target ex-periments in the North Area. The extracted intensity is con-trolled in feed-forward correction of the horizontal tune viathe main SPS quadrupoles. The Mains power supply noiseat 50 Hz and harmonics is also corrected in feed-forwardby small amplitude tune modulation at the respective fre-quencies with a dedicated additional quad...

The effect of fixed charge density and cartilage swelling on mechanics of knee joint cartilage during simulated gait.

Science.gov (United States)

Räsänen, Lasse P; Tanska, Petri; Zbýň, Štefan; van Donkelaar, Corrinus C; Trattnig, Siegfried; Nieminen, Miika T; Korhonen, Rami K

2017-08-16

The effect of swelling of articular cartilage, caused by the fixed charge density (FCD) of proteoglycans, has not been demonstrated on knee joint mechanics during simulated walking before. In this study, the influence of the depth-wise variation of FCD was investigated on the internal collagen fibril strains and the mechanical response of the knee joint cartilage during gait using finite element (FE) analysis. The FCD distribution of tibial cartilage was implemented from sodium ( 23 Na) MRI into a 3-D FE-model of the knee joint ("Healthy model"). For comparison, models with decreased FCD values were created according to the decrease in FCD associated with the progression of osteoarthritis (OA) ("Early OA" and "Advanced OA" models). In addition, a model without FCD was created ("No FCD" model). The effect of FCD was studied with five different collagen fibril network moduli of cartilage. Using the reference fibril network moduli, the decrease in FCD from "Healthy model" to "Early OA" and "Advanced OA" models resulted in increased axial strains (by +2 and +6%) and decreased fibril strains (by -3 and -13%) throughout the stance, respectively, calculated as mean values through cartilage depth in the tibiofemoral contact regions. Correspondingly, compared to the "Healthy model", the removal of the FCD altogether in "NoFCD model" resulted in increased mean axial strains by +16% and decreased mean fibril strains by -24%. This effect was amplified as the fibril network moduli were decreased by 80% from the reference. Then mean axial strains increased by +6, +19 and +49% and mean fibril strains decreased by -9, -20 and -32%, respectively. Our results suggest that the FCD in articular cartilage has influence on cartilage responses in the knee during walking. Furthermore, the FCD is suggested to have larger impact on cartilage function as the collagen network degenerates e.g. in OA. Copyright © 2017 Elsevier Ltd. All rights reserved.

Methodology for performing surveys for fixed contamination

International Nuclear Information System (INIS)

Durham, J.S.; Gardner, D.L.

1994-10-01

This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

Progress of long coated conductors fabrication with fluorine-free CSD method at SWJTU

International Nuclear Information System (INIS)

Zhao, Y.; Wang, W.T.; Lei, M.; Pu, M.H.; Zhang, Y.; Cheng, C.H.

2013-01-01

Highlights: • Recent progress on the long coated conductors fabrication by F-free CSD method is presented. • Single buffer and partial-melting technology and slot-die coating methods have been developed. • Reel-to-reel facilities for continuous process have been achieved. -- Abstract: Recent progress on the fabrication of long high-T c superconducting coated conductors with a fluorine-free chemical solution deposition (CSD) method is presented. Developments including such novel methods as single buffer technology, partial-melting process on YBa 2 Cu 3 O 7 (YBCO), slot-die coating and drying; reel-to-reel facilities for continuous process have been achieved in the effort on high-T c superconducting coated conductors at SWJTU, which form a comprehensive technology to fabricate long coated tapes with high performances

Progress of long coated conductors fabrication with fluorine-free CSD method at SWJTU

Energy Technology Data Exchange (ETDEWEB)

Zhao, Y., E-mail: yzhao@swjtu.edu.cn [Key Lab of Advanced Materials Technologies, Key Lab of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education), Superconductivity and New Energy Center (SNEC), Southwest Jiaotong University, Chengdu 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia); Wang, W.T.; Lei, M.; Pu, M.H.; Zhang, Y. [Key Lab of Advanced Materials Technologies, Key Lab of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education), Superconductivity and New Energy Center (SNEC), Southwest Jiaotong University, Chengdu 610031 (China); Cheng, C.H. [School of Materials Science and Engineering, University of New South Wales, Sydney 2052, NSW (Australia)

2013-10-15

Highlights: • Recent progress on the long coated conductors fabrication by F-free CSD method is presented. • Single buffer and partial-melting technology and slot-die coating methods have been developed. • Reel-to-reel facilities for continuous process have been achieved. -- Abstract: Recent progress on the fabrication of long high-T{sub c} superconducting coated conductors with a fluorine-free chemical solution deposition (CSD) method is presented. Developments including such novel methods as single buffer technology, partial-melting process on YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO), slot-die coating and drying; reel-to-reel facilities for continuous process have been achieved in the effort on high-T{sub c} superconducting coated conductors at SWJTU, which form a comprehensive technology to fabricate long coated tapes with high performances.

A fixed-point theorem for holomorphic maps

OpenAIRE

TIMONEY, RICHARD

1994-01-01

PUBLISHED We consider the action on the maximal ideal space M of the algebra H of bounded analytic functions, induced by an analytic self?map of a complex manifold, X. After some general preliminaries, we focus on the question of the existence of fixed points for this action, in the case when X is the open unit disk, D. We classify the fixed?point?free M?obius transformations, and we show that for an arbitrary analytic map from D into itself, the induced map has a fixed poin...

Gaining Insight into an Organization's Fixed Assets.

Science.gov (United States)

Hardy, Elisabet

2003-01-01

Discusses issues related to school district implementation of June 2001 Government Accounting Standards Board (GASB) Statement 34 designed to change how schools report fixed assets. Includes planning for GASB implementation, conducting fixed-asset inventories, and making time for GASB reporting. (PKP)

Donation return time at fixed and mobile donation sites

Science.gov (United States)

Carey, Patricia M.; High, Patrick M.; Schlumpf, Karen S.; Johnson, Bryce R.; Mast, Alan E.; Rios, Jorge A.; Simon, Toby L.; Wilkinson, Susan L.

2013-01-01

BACKGROUND This study investigated the effect of blood donation environment, fixed or mobile with differing sponsor types, on donation return time. STUDY DESIGN AND METHODS Data from 2006 through 2009 at six US blood centers participating in the Retrovirus Epidemiology Donor Study-II (REDS-II) were used for analysis. Descriptive statistics stratified by whole blood (WB), plateletpheresis (PP), and double red blood cell (R2) donations were obtained for fixed and mobile locations, including median number of donations and median interdonation interval. A survival analysis estimated median return time at fixed and mobile sites, while controlling for censored return times, demographics, blood center, and mandatory recovery times. RESULTS Two-thirds (67.9%) of WB donations were made at mobile sites, 97.4% of PP donations were made at fixed sites, and R2 donations were equally distributed between fixed and mobile locations. For donations at fixed sites only or alternating between fixed and mobile sites, the highest median numbers of donations were nine and eight, respectively, and the shortest model-adjusted median return times (controlling for mandatory eligibility times of 56 and 112 days) were 36 and 30 days for WB and R2 donations, respectively. For PP donations, the shortest model-adjusted median return time was 23 days at a fixed location and the longest was 693 days at community locations. CONCLUSION WB, PP, and R2 donors with the shortest time between donations were associated with fixed locations and those alternating between fixed and mobile locations, even after controlling for differing mandatory recovery times for the different blood donation procedures. PMID:21745215

Investments in fixed assets and depreciation of fixed assets: theoretical and practical aspects of study and analysis

Directory of Open Access Journals (Sweden)

Irina D. Demina

2017-01-01

Full Text Available It is indicated that domestic economy is experiencing a shortage of investment.The acceleration of the processes of import substitution is one of the most important challenges facing the domestic economy at present.Investments, especially capital investments and related investment relations constitute the basis for the development of the national economy and improving the efficiency of social production as a whole. A problem of formation of the amortization fundremains actual at the moment. In the modern scientific and educational literature amortization fund means the fund, including the use of funds to complete the restoration and repair of the fixed assets. This paper makesthe analysis of the situation in the area of investment in the fixed capital, which has developed in Russia for the past severalyears. The aim of this paper is to study the investment climate in the country based on the analysis of investments in the fixed capital by the sources of financing and types of the economic activity. The work is based on dynamic and structural analysis of analytical and statistical information on the processes occurring in this field.As a result, it can be noted that in spite of a number of efforts being made, in general, there are low growth rates in industry, there is a deficit of investments in the fixed assets. Most of the investments in fixed assets are carried out at the expense of the organizations’ own funds. A significant number of economic entities do not have the means, necessary for the technological renewal. Unfortunately, the regulatory framework in the field of accounting for the fixed assets and accrual of depreciation does not imply the use of a special account for the accumulation, and, most importantly, for the purposeful control of the use of the depreciation fund.First of all, it is necessary for companies with state participation and monopoly organizations. The lack of control over the targeted use of the depreciation fund

Tariffs and Firm-Level Heterogeneous Fixed Export Costs

DEFF Research Database (Denmark)

Schröder, Philipp J.H.; Jørgensen, Jan Guldager

2006-01-01

This paper presents a two country intra-industry trade model with bilateral ad valorem tariffs and fixed export costs that are heterogeneous across firms. In this model not all firms will choose to export. We examine the effects of reciprocal changes in the tariff and the fixed export barrier...... on the number of firms, firm profits, tariff revenue and consumer welfare. We show that both types of trade barriers reduce (increase) the number of exporting (pure domestic) firms. However, the sum of available home and foreign varieties may actually increase for small tariffs. Firm profits fall for both...... the tariff and the fixed export barrier. Tariff revenue falls for an increase in fixed exporting costs whereas we have a Laffer curve effect for the tariff. Finally, we establish that welfare falls with fixed export costs and large tariffs but increases for small tariffs, i.e. there exist a welfare...

Apparatus for fixing radioactive waste

International Nuclear Information System (INIS)

Murphy, J.D.; Pirro, J. Jr.; Lawrence, M.; Wisla, S.F.

1975-01-01

Fixing radioactive waste is disclosed in which the waste is collected as a slurry in aqueous media in a metering tank located within the nuclear facilities. Collection of waste is continued from time to time until a sufficient quantity of material to make up a full shipment to a burial ground has been collected. The slurry is then cast in shipping containers for shipment to a burial ground or the like by metering through a mixer into which fixing materials are simultaneously metered at a rate to yield the desired proportions of materials. (U.S.)

Nonthermal fixed points and the functional renormalization group

International Nuclear Information System (INIS)

Berges, Juergen; Hoffmeister, Gabriele

2009-01-01

Nonthermal fixed points represent basic properties of quantum field theories, in addition to vacuum or thermal equilibrium fixed points. The functional renormalization group on a closed real-time path provides a common framework for their description. For the example of an O(N) symmetric scalar theory it reveals a hierarchy of fixed point solutions, with increasing complexity from vacuum and thermal equilibrium to nonequilibrium

Topological fixed point theory of multivalued mappings

CERN Document Server

Górniewicz, Lech

1999-01-01

This volume presents a broad introduction to the topological fixed point theory of multivalued (set-valued) mappings, treating both classical concepts as well as modern techniques. A variety of up-to-date results is described within a unified framework. Topics covered include the basic theory of set-valued mappings with both convex and nonconvex values, approximation and homological methods in the fixed point theory together with a thorough discussion of various index theories for mappings with a topologically complex structure of values, applications to many fields of mathematics, mathematical economics and related subjects, and the fixed point approach to the theory of ordinary differential inclusions. The work emphasises the topological aspect of the theory, and gives special attention to the Lefschetz and Nielsen fixed point theory for acyclic valued mappings with diverse compactness assumptions via graph approximation and the homological approach. Audience: This work will be of interest to researchers an...

Rapidity correlations at fixed multiplicity in cluster emission models

CERN Document Server

Berger, M C

1975-01-01

Rapidity correlations in the central region among hadrons produced in proton-proton collisions of fixed final state multiplicity n at NAL and ISR energies are investigated in a two-step framework in which clusters of hadrons are emitted essentially independently, via a multiperipheral-like model, and decay isotropically. For n>or approximately=/sup 1///sub 2/(n), these semi-inclusive distributions are controlled by the reaction mechanism which dominates production in the central region. Thus, data offer cleaner insight into the properties of this mechanism than can be obtained from fully inclusive spectra. A method of experimental analysis is suggested to facilitate the extraction of new dynamical information. It is shown that the n independence of the magnitude of semi-inclusive correlation functions reflects directly the structure of the internal cluster multiplicity distribution. This conclusion is independent of certain assumptions concerning the form of the single cluster density in rapidity space. (23 r...

Fixed target facility at the SSC

Energy Technology Data Exchange (ETDEWEB)

Loken, S.C.; Morfin, J.G.

1985-01-01

The question of whether a facility for fixed target physics should be provided at the SSC must be answered before the final technical design of the SSC can be completed, particularly if the eventual form of extraction would influence the magnet design. To this end, an enthusiastic group of experimentalists, theoreticians and accelerator specialists have studied this point. The accelerator physics issues were addressed by a group led by E. Colton whose report is contained in these proceedings. The physics addressable by fixed target was considered by many of the Physics area working groups and in particular by the Structure Function Group. This report is the summary of the working group which considered various SSC fixed target experiments and determined which types of beams and detectors would be required. 13 references, 5 figures.

Fixed target facility at the SSC

International Nuclear Information System (INIS)

Loken, S.C.; Morfin, J.G.

1985-01-01

The question of whether a facility for fixed target physics should be provided at the SSC must be answered before the final technical design of the SSC can be completed, particularly if the eventual form of extraction would influence the magnet design. To this end, an enthusiastic group of experimentalists, theoreticians and accelerator specialists have studied this point. The accelerator physics issues were addressed by a group led by E. Colton whose report is contained in these proceedings. The physics addressable by fixed target was considered by many of the Physics area working groups and in particular by the Structure Function Group. This report is the summary of the working group which considered various SSC fixed target experiments and determined which types of beams and detectors would be required. 13 references, 5 figures

Ten years of clinical experience in the use of fixed-pressure versus programmable valves: a retrospective study of 159 patients.

Science.gov (United States)

Mpakopoulou, Maria; Brotis, Alexandros G; Gatos, Haralampos; Paterakis, Konstantinos; Fountas, Kostas N

2012-01-01

The aim of this study was to present our 10-year experience with the use of fixed-pressure and programmable valves in the treatment of adult patients requiring cerebrospinal fluid (CSF) diversion. Patients (n = 159; 89 male and 70 female) suffering from hydrocephalus of various causes underwent CSF shunt implantation. Forty fixed-pressure and 119 programmable valves were initially implanted. The observed revision rate was 40% in patients with fixed-pressure valves. In 20% of these patients, a revision due to valve mechanism malfunction was undertaken, and the initial valve was replaced with a programmable one. The revision rate in the adjustable-pressure valve subgroup was 20%. The infection rate for the fixed-pressure and programmable valve subgroups were 3%, and 1.7%, respectively. Similarly, subdural fluid collections were noticed in 17% and 4% of patients with fixed-pressure valves and programmable valves, respectively. The revision and over-drainage rates were significantly lower when using programmable valves, and thus, this type of valve is preferred whenever CSF has to be diverted.

Renormalization Scale-Fixing for Complex Scattering Amplitudes

Energy Technology Data Exchange (ETDEWEB)

Brodsky, Stanley J.; /SLAC; Llanes-Estrada, Felipe J.; /Madrid U.

2005-12-21

We show how to fix the renormalization scale for hard-scattering exclusive processes such as deeply virtual meson electroproduction by applying the BLM prescription to the imaginary part of the scattering amplitude and employing a fixed-t dispersion relation to obtain the scale-fixed real part. In this way we resolve the ambiguity in BLM renormalization scale-setting for complex scattering amplitudes. We illustrate this by computing the H generalized parton distribution at leading twist in an analytic quark-diquark model for the parton-proton scattering amplitude which can incorporate Regge exchange contributions characteristic of the deep inelastic structure functions.

Mechanical seal assembly

Science.gov (United States)

Kotlyar, Oleg M.

2001-01-01

An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

Mechanical Seal Assembly

Energy Technology Data Exchange (ETDEWEB)

Kotlyar, Oleg M.

1999-06-18

An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

Fixed-Time Stability of the Hydraulic Turbine Governing System

Directory of Open Access Journals (Sweden)

Caoyuan Ma

2018-01-01

Full Text Available This paper studies the problem of fixed-time stability of hydraulic turbine governing system with the elastic water hammer nonlinear model. To control and improve the quality of hydraulic turbine governing system, a new fixed-time control strategy is proposed, which can stabilize the water turbine governing system within a fixed time. Compared with the finite-time control strategy where the convergence rate depends on the initial state, the settling time of the fixed-time control scheme can be adjusted to the required value regardless of the initial conditions. Finally, we numerically show that the fixed-time control is more effective than and superior to the finite-time control.

Reinforcement of a PMMA resin for interim fixed prostheses with silica nanoparticles.

Science.gov (United States)

Topouzi, Marianthi; Kontonasaki, Eleana; Bikiaris, Dimitrios; Papadopoulou, Lambrini; Paraskevopoulos, Konstantinos M; Koidis, Petros

2017-05-01

Fractures in long span provisional/interim restorations are a common complication. Adequate fracture toughness is necessary to resist occlusal forces and crack propagation, so these restorations should be constructed with materials of improved mechanical properties. The aim of this study was to investigate the possible reinforcement of neat silica nanoparticles and trietoxyvinylsilane-modified silica nanoparticles in a PMMA resin for fixed interim restorations. Composite PMMA-Silica nanoparticles powders were mixed with PMMA liquid and compact bar shaped specimens were fabricated according to the British standard BS EN ISO 127337:2005. The single-edge notched method was used to evaluate fracture toughness (three-point bending test), while the dynamic thermomechanical properties (Storage Modulus, Loss Modulus, tanδ) of a series of nanocomposites with different amounts of nanoparticles (0.25%, 0.50%, 0.75%, 1% w.t.) were evaluated. Statistical analysis was performed and the statistically significant level was set to pPMMA resins used in fixed provisional restorations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fractal Structures For Fixed Mems Capacitors

KAUST Repository

Elshurafa, Amro M.

2014-08-28

An embodiment of a fractal fixed capacitor comprises a capacitor body in a microelectromechanical system (MEMS) structure. The capacitor body has a first plate with a fractal shape separated by a horizontal distance from a second plate with a fractal shape. The first plate and the second plate are within the same plane. Such a fractal fixed capacitor further comprises a substrate above which the capacitor body is positioned.

Fractal Structures For Fixed Mems Capacitors

KAUST Repository

Elshurafa, Amro M.; Radwan, Ahmed Gomaa Ahmed; Emira, Ahmed A.; Salama, Khaled N.

2014-01-01

An embodiment of a fractal fixed capacitor comprises a capacitor body in a microelectromechanical system (MEMS) structure. The capacitor body has a first plate with a fractal shape separated by a horizontal distance from a second plate with a fractal shape. The first plate and the second plate are within the same plane. Such a fractal fixed capacitor further comprises a substrate above which the capacitor body is positioned.

48 CFR 1852.216-74 - Estimated cost and fixed fee.

Science.gov (United States)

2010-10-01

... and Clauses 1852.216-74 Estimated cost and fixed fee. As prescribed in 1816.307-70(b), insert the following clause: Estimated Cost and Fixed Fee (DEC 1991) The estimated cost of this contract is ______ exclusive of the fixed fee of ______. The total estimated cost and fixed fee is ______. (End of clause) [62...

48 CFR 36.207 - Pricing fixed-price construction contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Pricing fixed-price... Contracting for Construction 36.207 Pricing fixed-price construction contracts. (a) Generally, firm-fixed... methods. (b) Lump-sum pricing shall be used in preference to unit pricing except when— (1) Large...

HEALTH INSURANCE: FIXED CONTRIBUTION AND REIMBURSEMENT MAXIMA

CERN Document Server

Human Resources Division

2001-01-01

Affected by the salary adjustments on 1 January 2001 and the evolution of the staff members and fellows population, the average reference salary, which is used as an index for fixed contributions and reimbursement maxima, has changed significantly. An adjustment of the amounts of the reimbursement maxima and the fixed contributions is therefore necessary, as from 1 January 2001. Reimbursement maxima The revised reimbursement maxima will appear on the leaflet summarizing the benefits for the year 2001, which will be sent out with the forthcoming issue of the CHIS Bull'. This leaflet will also be available from the divisional secretariats and from the UNIQA office at CERN. Fixed contributions The fixed contributions, applicable to some categories of voluntarily insured persons, are set as follows (amounts in CHF for monthly contributions) : voluntarily insured member of the personnel, with normal health insurance cover : 910.- (was 815.- in 2000) voluntarily insured member of the personnel, with reduced heal...

Fix og færdig

Directory of Open Access Journals (Sweden)

Jens Pedersen

2012-12-01

Full Text Available Fix & Finish “WHO CAN FIX IT?” is an investigation of the needles left behind by drug users in Copenhagen’s Vesterbro district. Based on the praxiological methods developed by Annemarie Mol as well as processes of objectification as described by Daniel Miller, the used needle appears to be a multiple object that is related to opportunities, fear, good intentions and trash. This article is an invitation to study material culture and material practices as a part of semiotic and discursive analyses in order to sharpen a researcher’s analytical focus while remaining grounded in reality.

Determinants of private fixed investment in emerging country

Directory of Open Access Journals (Sweden)

Goitsemodimo Abel Molocwa

2018-03-01

Full Text Available The neoclassical and Keynesian theories regard private investment not only as a source of economic growth but also as a determinant of the potential extent of the national income. The aim of this research was to examine the determinants of private fixed investment in South Africa by employing the Johansen cointegration technique and the vector error correction model (VECM analysis. Based on the literature survey it appears that the previous studies mainly focused on private investment in manufacturing and infrastructure sectors therefore this is envisaged to add knowledge to a body of economics literature in this area by focusing more on private fixed investment and its determinants in South Africa. The study concludes that for the period under investigation GDP has the positive sign as expected. This suggests that in the long run it impact positively on private fixed investment. The findings of the study also confirmed that tax rate is a complementary to private fixed investment. Similarly, the real exchange rate coefficient was negative as expected which suggests that the depreciation of the currency stimulates the growth of South Africa private fixed investment. It is obvious that even the best economic model cannot achieve the expected outcomes immediately but these results encourage the study to believe that the South African monetary policy on exchange rate complements private fixed investment. Therefore, the study proposes that both even though both growth and general tax rate are difficult to accomplish simultaneously, they should be used to promote the flow of private fixed investment in South Africa.

A fractographic study of clinically retrieved zirconia–ceramic and metal–ceramic fixed dental prostheses

OpenAIRE

Pang, Zhen; Chughtai, Asima; Sailer, Irena; Zhang, Yu

2015-01-01

A recent 3-year randomized controlled trial (RCT) of tooth supported three- to five-unit zirconia-ceramic and metal-ceramic posterior fixed dental prostheses (FDPs) revealed that veneer chipping and fracture in zirconia-ceramic systems occurred more frequently than those in metal-ceramic systems [1]. This study seeks to elucidate the underlying mechanisms responsible for the fracture phenomena observed in this RCT using a descriptive fractographic analysis

48 CFR 236.271 - Cost-plus-fixed-fee contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Cost-plus-fixed-fee... CONTRACTS Special Aspects of Contracting for Construction 236.271 Cost-plus-fixed-fee contracts. Annual military construction appropriations acts restrict the use of cost-plus-fixed-fee contracts (see 216.306(c...

29 CFR 1910.161 - Fixed extinguishing systems, dry chemical.

Science.gov (United States)

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Fixed extinguishing systems, dry chemical. 1910.161 Section... § 1910.161 Fixed extinguishing systems, dry chemical. (a) Scope and application. This section applies to all fixed extinguishing systems, using dry chemical as the extinguishing agent, installed to meet a...

48 CFR 229.402-1 - Foreign fixed-price contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Foreign fixed-price... Foreign fixed-price contracts. Use the clause at 252.229-7000, Invoices Exclusive of Taxes or Duties, in solicitations and contracts when a fixed-price contract will be awarded to a foreign concern. ...

49 CFR 587.18 - Dimensions of fixed rigid barrier.

Science.gov (United States)

2010-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.18 Dimensions of fixed rigid barrier. (a) The fixed rigid barrier has a mass of not... 49 Transportation 7 2010-10-01 2010-10-01 false Dimensions of fixed rigid barrier. 587.18 Section...

Fixed export costs and multi-product firms

NARCIS (Netherlands)

Creusen, H.; Smeets, R.

2011-01-01

This paper has two aims. First, we uncover some salient components of fixed export costs, which play a crucial role in recent heterogeneous firms models of international trade. Second, we investigate whether the importance of these fixed export costs varies with the size of a firms export product

Fixed export cost heterogeneity, trade and welfare

DEFF Research Database (Denmark)

Jørgensen, Jan Guldager; Schröder, Philipp J.H.

2008-01-01

-country intra-industry trade model where firms are of two different marginal costs types and where fixed export costs are heterogeneous across firms. This model traces many of the stylized facts of international trade. However, we find that with heterogeneous fixed export costs there exists a positive bilateral...

Migration and clinical outcome of mobile-bearing versus fixed-bearing single-radius total knee arthroplasty.

Science.gov (United States)

Van Hamersveld, Koen T; Marang-Van De Mheen, Perla J; Van Der Heide, Huub J L; Van Der Linden-Van Der Zwaag, Henrica M J; Valstar, Edward R; Nelissen, Rob G H H

2018-04-01

Background and purpose - Mobile-bearing total knee prostheses (TKPs) were developed in the 1970s in an attempt to increase function and improve implant longevity. However, modern fixed-bearing designs like the single-radius TKP may provide similar advantages. We compared tibial component migration measured with radiostereometric analysis (RSA) and clinical outcome of otherwise similarly designed cemented fixed-bearing and mobile-bearing single-radius TKPs. Patients and methods - RSA measurements and clinical scores were assessed in 46 randomized patients at baseline, 6 months, 1 year, and annually thereafter up to 6 years postoperatively. A linear mixed-effects model was used to analyze the repeated measurements. Results - Both groups showed comparable migration (p = 0.3), with a mean migration at 6-year follow-up of 0.90 mm (95% CI 0.49-1.41) for the fixed-bearing group compared with 1.22 mm (95% CI 0.75-1.80) for the mobile-bearing group. Clinical outcomes were similar between groups. 1 fixed-bearing knee was revised for aseptic loosening after 6 years and 2 knees (1 in each group) were revised for late infection. 2 knees (1 in each group) were suspected for loosening due to excessive migration. Another mobile-bearing knee was revised after an insert dislocation due to failure of the locking mechanism 6 weeks postoperatively, after which study inclusion was preliminary terminated. Interpretation - Fixed-bearing and mobile-bearing single-radius TKPs showed similar migration. The latter may, however, expose patients to more complex surgical techniques and risks such as insert dislocations inherent to this rotating-platform design.

Timelines of the “free-particle” and “fixed-particle” models of stone-formation: theoretical and experimental investigations

NARCIS (Netherlands)

Kok, D.J.; W.P.A. Boellaard (Willem); Y. Ridwan (Yanto); Levchenko, V.A.

2017-01-01

textabstractTwo major theories on renal stone formation will be reviewed, the “free-particle” and “fixed-particle” mechanisms. These theories combine data on intrinsic factors (inborn metabolic errors), extrinsic factors (diet), renal cell responses and the physico-chemistry and biochemistry of

Remotely operated closure device for a pipeline with a fixed pipeline flange

International Nuclear Information System (INIS)

Westendorf, H.

1987-01-01

The remotely operated closure is set by suspension centring on the circumference of a blank flange on the fixed pipeline flange to be closed. By operating a central actuating mechanism at the closure, the clamping levers are adjusted so that the blank flange is clamped to the pipeline flange and the two flanges are pressed together. The spring-loaded clamping levers are particularly suitable for actuating the closure with the pliers of a manipulator of a large cell. (DG) [de

Compatibility between Legumes and Rhizobia for the Establishment of a Successful Nitrogen-Fixing Symbiosis.

Science.gov (United States)

Clúa, Joaquín; Roda, Carla; Zanetti, María Eugenia; Blanco, Flavio A

2018-02-27

The root nodule symbiosis established between legumes and rhizobia is an exquisite biological interaction responsible for fixing a significant amount of nitrogen in terrestrial ecosystems. The success of this interaction depends on the recognition of the right partner by the plant within the richest microbial ecosystems on Earth, the soil. Recent metagenomic studies of the soil biome have revealed its complexity, which includes microorganisms that affect plant fitness and growth in a beneficial, harmful, or neutral manner. In this complex scenario, understanding the molecular mechanisms by which legumes recognize and discriminate rhizobia from pathogens, but also between distinct rhizobia species and strains that differ in their symbiotic performance, is a considerable challenge. In this work, we will review how plants are able to recognize and select symbiotic partners from a vast diversity of surrounding bacteria. We will also analyze recent advances that contribute to understand changes in plant gene expression associated with the outcome of the symbiotic interaction. These aspects of nitrogen-fixing symbiosis should contribute to translate the knowledge generated in basic laboratory research into biotechnological advances to improve the efficiency of the nitrogen-fixing symbiosis in agronomic systems.

The importance of fixed costs in animal health systems.

Science.gov (United States)

Tisdell, C A; Adamson, D

2017-04-01

In this paper, the authors detail the structure and optimal management of health systems as influenced by the presence and level of fixed costs. Unlike variable costs, fixed costs cannot be altered, and are thus independent of the level of veterinary activity in the short run. Their importance is illustrated by using both single-period and multi-period models. It is shown that multi-stage veterinary decision-making can often be envisaged as a sequence of fixed-cost problems. In general, it becomes clear that, the higher the fixed costs, the greater the net benefit of veterinary activity must be, if such activity is to be economic. The authors also assess the extent to which it pays to reduce fixed costs and to try to compensate for this by increasing variable costs. Fixed costs have major implications for the industrial structure of the animal health products industry and for the structure of the private veterinary services industry. In the former, they favour market concentration and specialisation in the supply of products. In the latter, they foster increased specialisation. While cooperation by individual farmers may help to reduce their individual fixed costs, the organisational difficulties and costs involved in achieving this cooperation can be formidable. In such cases, the only solution is government provision of veterinary services. Moreover, international cooperation may be called for. Fixed costs also influence the nature of the provision of veterinary education.

Effects of rigid or adaptive confinement on colloidal self-assembly. Fixed vs. fluctuating number of confined particles

Energy Technology Data Exchange (ETDEWEB)

Pȩkalski, J.; Ciach, A. [Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warszawa (Poland); Almarza, N. G. [Instituto de Química Física Rocasolano, CSIC, Serrano 119, E-28006 Madrid (Spain)

2015-05-28

The effects of confinement on colloidal self-assembly in the case of fixed number of confined particles are studied in the one dimensional lattice model solved exactly in the grand canonical ensemble (GCE) in Pȩkalski et al. [J. Chem. Phys. 142, 014903 (2015)]. The model considers a pair interaction defined by a short-range attraction plus a longer-range repulsion. We consider thermodynamic states corresponding to self-assembly into clusters. Both fixed and adaptive boundaries are studied. For fixed boundaries, there are particular states in which, for equal average densities, the number of clusters in the GCE is larger than in the canonical ensemble. The dependence of pressure on density has a different form when the system size changes with fixed number of particles and when the number of particles changes with fixed size of the system. In the former case, the pressure has a nonmonotonic dependence on the system size. The anomalous increase of pressure for expanding system is accompanied by formation of a larger number of smaller clusters. In the case of elastic confining surfaces, we observe a bistability, i.e., two significantly different system sizes occur with almost the same probability. The mechanism of the bistability in the closed system is different to that of the case of permeable walls, where the two equilibrium system sizes correspond to a different number of particles.

Fixed automated spray technology.

Science.gov (United States)

2011-04-19

This research project evaluated the construction and performance of Boschungs Fixed Automated : Spray Technology (FAST) system. The FAST system automatically sprays de-icing material on : the bridge when icing conditions are about to occur. The FA...

Some Design Considerations on the Electrostatically Actuated Fixed-Fixed End Type MEMS Switches

International Nuclear Information System (INIS)

Sadeghian, Hamed; Rezazadeh, Ghader; Sani, Ebrahim Abbaspour

2006-01-01

The nonlinear electrostatic pull-in behaviour of MEMS Switches in micro-electromechanical systems (MEMS) is investigated in this article. We used the distributed model when the electrostatic pressure didn't apply at the whole of the beam and applied only in the mid-part of the beam. In this part the electrostatic area is different from two other parts. The model uses Euler-Bernoulli beam theory for fixed-fixed end type beams. The finite difference method was used to solve the nonlinear equation. The proposed model includes the fringing effects of the electrical field, residual stress and varying electrostatic area effects. The numerical results reveal that the profile deflection of the MEMS Switch may not only influence the distribution of the electrostatic force but also considerably change the nonlinear pull-in voltage

10 CFR 603.305 - Use of a fixed-support TIA.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Use of a fixed-support TIA. 603.305 Section 603.305 Energy... Expenditure-Based and Fixed-Support Technology Investment Agreements § 603.305 Use of a fixed-support TIA. The contracting officer may use a fixed-support TIA if: (a) The agreement is to support or stimulate RD&D with...

Versatility of PEEK as a fixed partial denture framework.

Science.gov (United States)

Sinha, Nikita; Gupta, Nidhi; Reddy, K Mahendranadh; Shastry, Y M

2017-01-01

Materials used for fixed partial denture (FPD) frameworks have had properties of excellent strength, durability, and biocompatibility. Some of the materials which have been used till date include alloys, ceramics, and high-performance polymers such as zirconia, Ni-Cr, lithium disilicate, and so on. All these, though excellent, have their advantages and disadvantages. Hence, the search has always been on for a better material. One such material, which has made its foray into dentistry in the recent times, is polyetheretherketone (PEEK). It is a semicrystalline thermoplastic material. PEEK has an excellent chemical resistance and mechanical properties that are retained at high temperatures. The versatility of PEEK as a dental material for FPD framework was evaluated in this case report.

Multimodal analgesia in moderate-to-severe pain: a role for a new fixed combination of dexketoprofen and tramadol.

Science.gov (United States)

Varrassi, Giustino; Hanna, Magdi; Macheras, Giorgos; Montero, Antonio; Montes Perez, Antonio; Meissner, Winfried; Perrot, Serge; Scarpignato, Carmelo

2017-06-01

Untreated and under-treated pain represent one of the most pervasive health problems, which is worsening as the population ages and accrues risk for pain. Multiple treatment options are available, most of which have one mechanism of action, and cannot be prescribed at unlimited doses due to the ceiling of efficacy and/or safety concerns. Another limitation of single-agent analgesia is that, in general, pain is due to multiple causes. Combining drugs from different classes, with different and complementary mechanism(s) of action, provides a better opportunity for effective analgesia at reduced doses of individual agents. Therefore, there is a potential reduction of adverse events, often dose-related. Analgesic combinations are recommended by several organizations and are used in clinical practice. Provided the two agents are combined in a fixed-dose ratio, the resulting medication may offer advantages over extemporaneous combinations. Dexketoprofen/tramadol (25 mg/75 mg) is a new oral fixed-dose combination offering a comprehensive multimodal approach to moderate-to-severe acute pain that encompasses central analgesic action, peripheral analgesic effect and anti-inflammatory activity, together with a good tolerability profile. The analgesic efficacy of dexketoprofen/tramadol combination is complemented by a favorable pharmacokinetic and pharmacodynamic profile, characterized by rapid onset and long duration of action. This has been well documented in both somatic- and visceral-pain human models. This review discusses the available clinical evidence and the future possible applications of dexketoprofen/tramadol fixed-dose combination that may play an important role in the management of moderate-to-severe acute pain.

12 CFR 619.9170 - Fixed interest rate.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Fixed interest rate. 619.9170 Section 619.9170 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM DEFINITIONS § 619.9170 Fixed interest rate. The rate of interest specified in the note or loan document which will prevail as the maximum...

48 CFR 16.306 - Cost-plus-fixed-fee contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Cost-plus-fixed-fee...-fee contracts. (a) Description. A cost-plus-fixed-fee contract is a cost-reimbursement contract that.... The fixed fee does not vary with actual cost, but may be adjusted as a result of changes in the work...

Muscle Synergies of Untrained Subjects during 6 min Maximal Rowing on Slides and Fixed Ergometer

Directory of Open Access Journals (Sweden)

Shazlin Shaharudin

2014-12-01

Full Text Available The slides ergometer (SE was an improvisation from fixed ergometer (FE to bridge the gap of mechanics between ergometer rowing and on-water rowing. The specific mechanical constraints of these two types of ergometers may affect the pattern of muscle recruitment, coordination and adaptation. The main purpose of this study was to evaluate the muscle synergy during 6 minutes maximal rowing on slides (SE and fixed ergometers (FE. The laterality of muscle synergy was also examined. Surface electromyography activity, power output, heart rate, stroke length and stroke rate were analyzed from nine physically active subjects to assess the rowing performance. Physically active subjects, who were not specifically trained in rowing, were chosen to exclude the training effect on muscle synergy. Principal component analysis (PCA with varimax rotation was applied to extract muscle synergy. Three muscle synergies were sufficient to explain the majority of variance in SE (94.4 ± 2.2 % and FE (92.8 ± 1.7 %. Subjects covered more rowing distance, exerted greater power output and attained higher maximal heart rate during rowing on SE than on FE. The results proved the flexibility of muscle synergy to adapt to the mechanical constraints. Rowing on SE emphasized on bi-articular muscles contrary to rowing on FE which relied on cumulative effect of trunk and upper limb muscles during propulsive phase.

Fixed target physics at high energies

International Nuclear Information System (INIS)

Kirk, T.B.

1984-01-01

The number and type of fixed target experiments that can be pursued at a proton synchrotron are very large. The advent of the Fermilab superconducting accelerator, the Tevatron, will extend and improve the results which are given here from recent CERN and Fermilab experiments. The sample of experiments given in this paper is neither meant to be inclusive nor intensive. Hopefully, it will give the flavor of contemporary fixed target physics to a predominantly cosmic ray oriented audience. (author)

Carbon Accounting and Cost Estimation in Forestry Projects Using CO2Fix V.3

International Nuclear Information System (INIS)

Groen, T.; Nabuurs, G.J.; Schelhaas, M.J.

2006-01-01

Carbon and financial accounting of projects in the Land Use, Land-Use Change and Forestry sector is a topic of hot debate. Large uncertainty remains concerning the carbon dynamics, the way they should be accounted and the cost efficiency of the projects. Part of the uncertainty can be alleviated by standardisation and transparency of reporting methods. For this reason we further developed CO2FIX, a forest ecosystem carbon model, with modules for carbon and financial accounting. The model is applied to four cases: (1) Joint implementation afforestation project in Romania, (2) Forest management project in Central Europe, (3) Reduced impact logging possibly under the Clean Development Mechanism (CDM) in the future, and (4) Afforestation with native species under the Clean Development Mechanism. The results show the wide applicability of CO2FIX, from degrading grasslands as baseline cases to multiple cohort forest ecosystems. Also the results show that Forest Management in the European case can generate considerable amounts of carbon emission reductions. Further, the results show that although reduced impact logging is not yet an allowed option under the Clean Development Mechanism, it shows promising results in that it is (1) very cost effective, (2) seems to be able to generate intermediate amounts of credits and (3) seems to us as a project type that is not prone to leakage issues. These results are yet another indication to seriously consider reduced impact logging as an eligible measure under the CDM

Fixed Wireless may be a temporary answer

Indian Academy of Sciences (India)

Possible to enhance throughput by 4 with respect to Mobile Wireless. And get 8 to 10 bps / Hz / cell; Examples: BB corDECT: today provides 256/512kbps to each connection in fixed environment. Ideal for small town / rural Broadband. Fixed 802.16d/e does the same in but at much higher price-points.

Mixed quantum/classical theory of rotationally and vibrationally inelastic scattering in space-fixed and body-fixed reference frames.

Science.gov (United States)

Semenov, Alexander; Babikov, Dmitri

2013-11-07

We formulated the mixed quantum/classical theory for rotationally and vibrationally inelastic scattering process in the diatomic molecule + atom system. Two versions of theory are presented, first in the space-fixed and second in the body-fixed reference frame. First version is easy to derive and the resultant equations of motion are transparent, but the state-to-state transition matrix is complex-valued and dense. Such calculations may be computationally demanding for heavier molecules and/or higher temperatures, when the number of accessible channels becomes large. In contrast, the second version of theory requires some tedious derivations and the final equations of motion are rather complicated (not particularly intuitive). However, the state-to-state transitions are driven by real-valued sparse matrixes of much smaller size. Thus, this formulation is the method of choice from the computational point of view, while the space-fixed formulation can serve as a test of the body-fixed equations of motion, and the code. Rigorous numerical tests were carried out for a model system to ensure that all equations, matrixes, and computer codes in both formulations are correct.

Mixed quantum/classical theory of rotationally and vibrationally inelastic scattering in space-fixed and body-fixed reference frames

International Nuclear Information System (INIS)

Semenov, Alexander; Babikov, Dmitri

2013-01-01

We formulated the mixed quantum/classical theory for rotationally and vibrationally inelastic scattering process in the diatomic molecule + atom system. Two versions of theory are presented, first in the space-fixed and second in the body-fixed reference frame. First version is easy to derive and the resultant equations of motion are transparent, but the state-to-state transition matrix is complex-valued and dense. Such calculations may be computationally demanding for heavier molecules and/or higher temperatures, when the number of accessible channels becomes large. In contrast, the second version of theory requires some tedious derivations and the final equations of motion are rather complicated (not particularly intuitive). However, the state-to-state transitions are driven by real-valued sparse matrixes of much smaller size. Thus, this formulation is the method of choice from the computational point of view, while the space-fixed formulation can serve as a test of the body-fixed equations of motion, and the code. Rigorous numerical tests were carried out for a model system to ensure that all equations, matrixes, and computer codes in both formulations are correct

Real EPC. A method to assess the energy efficiency of newly built houses in practice; Reele EPC. Een methode voor de beoordeling van de energieprestatie van nieuwbouwwoningen in de praktijk

Energy Technology Data Exchange (ETDEWEB)

Menkveld, M.; Sipma, J.M. [ECN Beleidsstudies, Petten (Netherlands); Cozijnsen, E.; Leidelmeijer, K. [RIGO research en Advies, Amsterdam (Netherlands)

2013-12-15

In this report we describe a method to compare the energy performance in use with the energy performance calculation of newly build houses. We put the average real energy use of a project in the calculation method of the energy performance of new houses. In that way we could compare the energy performance of the building permit with the real performance in practice. Because the calculation method normalizes the energy use of a house by its user surface and surface of building shell, the energy performance of different projects could be compared also when the projects exist of different dwelling types. Also the energy performance of different energy concepts could be compared such as all-electric houses with a heat pump or houses with a gas fired condensing boiler [Dutch] Agentschap NL is betrokken bij veel nieuwbouwprojecten. Een grote vraag is altijd of in de praktijk ook de prestaties worden gehaald die van te voren werden verwacht. Agentschap NL heeft voorgesteld hiervoor een maat te ontwikkelen, namelijk de Reele EPC. ECN heeft deze methodiek uitgewerkt om van woningbouwprojecten de energieprestatie in de praktijk te vergelijken met de geplande EPC. Het idee is dat de energieprestatie in de praktijk wordt uitgedrukt in een reële EPC (de R-EPC)

Performance measurements of a dual-rotor arm mechanism for efficient flight transition of fixed-wing unmanned aerial vehicles

Science.gov (United States)

McGill, Karen Ashley Jean

Reconfigurable systems are a class of systems that can be transformed into different configurations, generally to perform unique functions or to maintain operational efficiency under distinct conditions. A UAV can be considered a reconfigurable system when coupled with various useful features such as vertical take-off and landing (VTOL), hover capability, long-range, and relatively large payload. Currently, a UAV having these capabilities is being designed by the UTSA Mechanical Engineering department. UAVs such as this one have the following potential uses: emergency response/disaster relief, hazard-critical missions, offshore oil rig/wind farm delivery, surveillance, etc. The goal of this thesis is to perform experimental thrust and power measurements for the propulsion system of this fixed-wing UAV. Focus was placed on a rotating truss arm supporting two brushless motors and rotors that will later be integrated to the ends of the UAV wing. These truss arms will rotate via a supporting shaft from 0° to 90° to transition the UAV between a vertical take-off, hover, and forward flight. To make this hover/transition possible, a relationship between thrust, arm angle, and power drawn was established by testing the performance of the arm/motor assembly at arm angles of 0°, 15°, 30°, 45°, 60°, 75°, and 90°. Universal equations for this system of thrust as a function of the arm angle were created by correlating data collected by a load cell. A Solidworks model was created and used to conduct fluid dynamics simulations of the streamlines over the arm/motor assembly.

Brouwer's ε-fixed point from Sperner's lemma

NARCIS (Netherlands)

Dalen, D. van

It is by now common knowledge that Brouwer gave mathematics in 1911 a miraculous tool, the fixed point theorem, and that later in life, he disavowed it. It usually came as a shock when he replied to the question “is the fixed point theorem correct ?” with a point blank “no”. This rhetoric exchange

A Comparative Experimental Study of Fixed Temperature and Fixed Heat Flux Boundary Conditions in Turbulent Thermal Convection

Science.gov (United States)

Huang, Shi-Di; Wang, Fei; Xi, Heng-Dong; Xia, Ke-Qing

2014-11-01

We report an experimental study of the influences of thermal boundary condition in turbulent thermal convection. Two configurations were examined: one was fixed heat flux at the bottom boundary and fixed temperature at the top (HC cells); the other was fixed temperature at both boundaries (CC cells). It is found that the flow strength in the CC cells is on average 9% larger than that in the HC ones, which could be understood as change in plume emission ability under different boundary conditions. It is further found, rather surprisingly, that flow reversals of the large-scale circulation occur more frequently in the CC cell, despite a stronger large-scale flow and more uniform temperature distribution over the boundaries. These findings provide new insights into turbulent thermal convection and should stimulate further studies, especially experimental ones. This work is supported by the Hong Kong Research Grants Council under Grant No. CUHK 403712.

Gauge-fixing ambiguity and monopole number

International Nuclear Information System (INIS)

Hioki, S.; Miyamura, O.

1991-01-01

Gauge-fixing ambiguities of lattice SU(2) QCD are studied in the maximally abelian and unitary gauges. In the former, we find local maxima of a gauge-fixing function which may correspond to Gribov copies. There is a definite anti-correlation between the number of monopoles and the value of the function. Errors of measured quantities coming from the ambiguity are found to be less than inherent dispersion in the ensemble average. No ambiguity is found in the unitary gauges. (orig.)

Improvement of the methods for company’s fixed assets analysis

Directory of Open Access Journals (Sweden)

T. A. Zhurkina

2018-01-01

Full Text Available Fixed assets are an integral component of the productive capacity of any enterprise. The financial results of the enterprise largely depend on their intensity and efficiency of use. The analysis of fixed assets is usually carried out using an integrated and systematic approach, based on their availability, their movement, efficiency of use (including their active part. In the opinion of some authors, the traditional methods of analyzing fixed assets have a number of shortcomings, since they do not take into account the life cycle of an enterprise, the ecological aspects of the operation of fixed assets, the operation specifics of the individual divisions of a company and its branches. In order to improve the methodology for analyzing fixed assets, the authors proposed to use formalized and nonformalized criteria for analyzing the risks associated with the fixed asset use. A survey questionnaire was designed to determine the likelihood of the risk of economic losses associated with the use of fixed assets. The authors propose using the integral indicator for the purpose of analyzing the risk of using fixed assets in dynamics. In order to improve the procedure for auditing, the authors proposed segregation of economic transactions with fixed assets according to their cycles in accordance with the stage of their reproduction. Operational analysis is important for managing the efficiency of the fixed asset use, especially during a critical period. Using the analysis of the regularity in grain combines performance would reduce losses during harvesting, implement the work within strictly defined time frame and remunerate the employees for high-quality and intensive performance of their tasks.

Parachuting from fixed objects: descriptive study of 106 fatal events in BASE jumping 1981-2006.

Science.gov (United States)

Westman, A; Rosén, M; Berggren, P; Björnstig, U

2008-06-01

To analyse the characteristics of fatal incidents in fixed object sport parachuting (building, antenna, span, earth (BASE) jumping) and create a basis for prevention. Descriptive epidemiological study. Data on reported fatal injury events (n = 106) worldwide in 1981-2006 retrieved from the BASE fatality list. Human, equipment and environmental factors. Identification of typical fatal incident and injury mechanisms for each of the four fixed object types of BASE jumping (building, antenna, span, earth). Human factors included parachutist free fall instability (loss of body control before parachute deployment), free fall acrobatics and deployment failure by the parachutist. Equipment factors included pilot chute malfunction and parachute malfunction. In cliff jumping (BASE object type E), parachute opening towards the object jumped was the most frequent equipment factor. Environmental factors included poor visibility, strong or turbulent winds, cold and water. The overall annual fatality risk for all object types during the year 2002 was estimated at about one fatality per 60 participants. Participants in BASE jumping should target risk factors with training and technical interventions. The mechanisms described in this study should be used by rescue units to improve the management of incidents.

Fixed site neutralization model programmer's manual. Volume 1

International Nuclear Information System (INIS)

Engi, D.; Chapman, L.; Judnick, W.; Blum, R.; Broegler, L.; Lenz, J.; Weinthraub, A.; Ballard, D.

1979-12-01

The Fixed Site Neutralization Model (FSNM) is a stochastic, time-stepped simulation of an engagement process whereby an adversary force attempts to steal or sabotage sensitive (e.g., nuclear) materials being guarded by a security force on a fixed site and a response force that is off-site. FSNM will assist regulatory bodies of the US Government in evaluating fixed site physical protection systems at various installations in a variety of scenarios. Most data input to the Fixed Site Neutralization Model are in binary form. The user's data are transformed into binary form by two supporting modules, the Data Preprocessor (DPP) and the Plex Preprocessor (PPP). Both preprocessors and the FSNM itself are written in FORTRAN. This volume of the program maintenance program contains: introduction, logic descriptions, PLEX data structure, PLEX records, dictionaries, and error conditions and comments

Distribution of variable vs fixed costs of hospital care.

Science.gov (United States)

Roberts, R R; Frutos, P W; Ciavarella, G G; Gussow, L M; Mensah, E K; Kampe, L M; Straus, H E; Joseph, G; Rydman, R J

1999-02-17

Most strategies proposed to control the rising cost of health care are aimed at reducing medical resource consumption rates. These approaches may be limited in effectiveness because of the relatively low variable cost of medical care. Variable costs (for medication and supplies) are saved if a facility does not provide a service while fixed costs (for salaried labor, buildings, and equipment) are not saved over the short term when a health care facility reduces service. To determine the relative variable and fixed costs of inpatient and outpatient care for a large urban public teaching hospital. Cost analysis. A large urban public teaching hospital. All expenditures for the institution during 1993 and for each service were categorized as either variable or fixed. Fixed costs included capital expenditures, employee salaries and benefits, building maintenance, and utilities. Variable costs included health care worker supplies, patient care supplies, diagnostic and therapeutic supplies, and medications. In 1993, the hospital had nearly 114000 emergency department visits, 40000 hospital admissions, 240000 inpatient days, and more than 500000 outpatient clinic visits. The total budget for 1993 was $429.2 million, of which $360.3 million (84%) was fixed and $68.8 million (16%) was variable. Overall, 31.5% of total costs were for support expenses such as utilities, employee benefits, and housekeeping salaries, and 52.4% included direct costs of salary for service center personnel who provide services to individual patients. The majority of cost in providing hospital service is related to buildings, equipment, salaried labor, and overhead, which are fixed over the short term. The high fixed costs emphasize the importance of adjusting fixed costs to patient consumption to maintain efficiency.

Utilization Bound of Non-preemptive Fixed Priority Schedulers

Science.gov (United States)

Park, Moonju; Chae, Jinseok

It is known that the schedulability of a non-preemptive task set with fixed priority can be determined in pseudo-polynomial time. However, since Rate Monotonic scheduling is not optimal for non-preemptive scheduling, the applicability of existing polynomial time tests that provide sufficient schedulability conditions, such as Liu and Layland's bound, is limited. This letter proposes a new sufficient condition for non-preemptive fixed priority scheduling that can be used for any fixed priority assignment scheme. It is also shown that the proposed schedulability test has a tighter utilization bound than existing test methods.

PDF fit in the fixed-flavour-number scheme

International Nuclear Information System (INIS)

Alekhin, S.; Bluemlein, J.; Moch, S.

2012-02-01

We discuss the heavy-quark contribution to deep inelastic scattering in the scheme with n f =3;4;5 fixed flavors. Based on the recent ABM11 PDF analysis of world data for deep-inelastic scattering and fixed-target data for the Drell-Yan process with the running-mass definition for heavy quarks we show that fixed flavor number scheme is sufficient for describing the deep-inelastic-scattering data in the entire kinematic range. We compare with other PDF sets and comment on the implications for measuring the strong coupling constant α s (M Z ).

Fixed-bed Reactor Dynamics and Control - A Review

DEFF Research Database (Denmark)

Jørgensen, S. B.

1986-01-01

The industrial diversity of fixed bed reactors offers a challenging and relevant set of control problems. These intricate problems arise due to the rather complex dynamics of fixed bed reactors and to the complexity of actual reactor configurations. Many of these control problems are nonlinear...... and multi-variable. During the last decade fixed bed reactor control strategies have been proposed and investigated experimentally. This paper reviews research on these complex control problems with an emphasis upon solutions which have been demon-strated to work in the laboratory and hold promise...

Review of calorimetry in Fermilab fixed-target experiments

International Nuclear Information System (INIS)

Crisler, M.B.

1995-04-01

The fixed-target program at Fermilab comprises as many as thirteen simultaneous experiments in ten separate beamlines using beams of primary protons, pions, kaons, electrons, neutrinos, and muons. The fixed target beamlines were last in operation in the latter half of 1991, shutting down in 1992. The next fixed target run is scheduled for early 1996. This article describes some of the wide variety of calorimetric devices that were in use in the past run or to be used in the coming run. Special attention is devoted to the new devices currently under construction

Metallic and antiferromagnetic fixed points from gravity

Science.gov (United States)

Paul, Chandrima

2018-06-01

We consider SU(2) × U(1) gauge theory coupled to matter field in adjoints and study RG group flow. We constructed Callan-Symanzik equation and subsequent β functions and study the fixed points. We find there are two fixed points, showing metallic and antiferromagnetic behavior. We have shown that metallic phase develops an instability if certain parametric conditions are satisfied.

Gauge fixing problem in the conformal QED

International Nuclear Information System (INIS)

Ichinose, Shoichi

1986-01-01

The gauge fixing problem in the conformal (spinor and scalar) QED is examined. For the analysis, we generalize Dirac's manifestly conformal-covariant formalism. It is shown that the (vector and matter) fields must obey a certain mixed (conformal and gauge) type of transformation law in order to fix the local gauge symmetry preserving the conformal invariance in the Lagrangian. (orig.)

Uptake of Cd(II Using Natural Zeolite: Batch and Continuous Fixed-Bed Studies

Directory of Open Access Journals (Sweden)

Luna M. LMarashdeh

2009-12-01

Full Text Available Uptake of Cd(II ions by natural phillipsite tuff was investigated both in shake-flask and fixed-bed columns. Equilibrium uptake, qe, was found to best fit Langmuir adsorption isotherm with a maximum value of 25.78 mg/g. Percent removal of Cd ions was close to 100% from initial metal ion concentrations in the range 50 - 75 mg/L at 5.0 g zeolite/L. Also, qe was found to vary exponentially with zeolite dose. Break points as high as 350 minutes were obtained from bed treatment at favorable conditions of a low solution flow rate and high bed depth. In batch experiments, equilibrium pH increased to < 8.0 excluding chemical precipitation as part of the removal while in fixed-beds the final pH exceeded 9.0. It is suggested that a sieve action of zeolite porous structure plays a role as an uptake mechanism in addition to the ion exchange.

Fixed point algebras for easy quantum groups

DEFF Research Database (Denmark)

Gabriel, Olivier; Weber, Moritz

2016-01-01

Compact matrix quantum groups act naturally on Cuntz algebras. The first author isolated certain conditions under which the fixed point algebras under this action are Kirchberg algebras. Hence they are completely determined by their K-groups. Building on prior work by the second author,we prove...... that free easy quantum groups satisfy these conditions and we compute the K-groups of their fixed point algebras in a general form. We then turn to examples such as the quantum permutation group S+ n,the free orthogonal quantum group O+ n and the quantum reflection groups Hs+ n. Our fixed point......-algebra construction provides concrete examples of free actions of free orthogonal easy quantum groups,which are related to Hopf-Galois extensions....

A fixed target facility at the SSC

International Nuclear Information System (INIS)

Loken, S.; Morfin, J.G.

1984-01-01

The question of whether a facility for fixed target physics should be provided at the SSC must be answered before the final technical design of the SSC can be completed, particularly if the eventual form of extraction would influence the magnet design. To this end, an enthusiastic group of experimentalists, theoreticians and accelerator specialists have studied this point. The accelerator physics issues were addressed by a group whose report is contained in these proceedings. The physics addressable by fixed target was considered by many of the Physics area working groups and in particular by the Structure Function Group. This report is the summary of the working group which considered various SSC fixed target experiments and determined which types of beams and detectors would be required

Surface energy loss processes in XPS studied by absolute reflection electron energy loss spectroscopy

International Nuclear Information System (INIS)

Nagatomi, T.; Goto, K.

2010-01-01

The results of the investigation of the inelastic interaction of 300-3000 eV electrons with the Ni and Au surfaces by the analysis of absolute reflection electron energy loss spectroscopy (REELS) spectra were described. The present analysis enables the inelastic mean free path (IMFP), surface excitation parameter (SEP) and differential SEP (DSEP) to be obtained simultaneously from an absolute REELS spectrum. The obtained IMFPs for Ni and Au showed a good agreement with those calculated using the TPP-2M predictive equation. The present SEPs determined for Ni and Au were fitted to the Chen's formula describing the dependence of the SEP on the electron energy, and material parameters for Ni and Au in Chen's formula were proposed. The present DESPs were compared with the theoretical results, and a reasonable agreement between the experimentally determined DSEPs and theoretical results was confirmed. The MC modeling of calculating the REELS spectrum, in which energy loss processes due to surface excitations are taken into account, was also described. The IMFP, SEP and DSEP determined by the present absolute REELS analysis were employed to describe energy loss processes by inelastic scattering in the proposed MC simulation. The simulated REELS spectra were found to be in a good agreement with the experimental spectra for both Ni and Au.

Quantitative analysis of an engineered CO2-fixing Escherichia coli reveals great potential of heterotrophic CO2 fixation.

Science.gov (United States)

Gong, Fuyu; Liu, Guoxia; Zhai, Xiaoyun; Zhou, Jie; Cai, Zhen; Li, Yin

2015-01-01

Production of fuels from the abundant and wasteful CO2 is a promising approach to reduce carbon emission and consumption of fossil fuels. Autotrophic microbes naturally assimilate CO2 using energy from light, hydrogen, and/or sulfur. However, their slow growth rates call for investigation of the possibility of heterotrophic CO2 fixation. Although preliminary research has suggested that CO2 fixation in heterotrophic microbes is feasible after incorporation of a CO2-fixing bypass into the central carbon metabolic pathway, it remains unclear how much and how efficient that CO2 can be fixed by a heterotrophic microbe. A simple metabolic flux index was developed to indicate the relative strength of the CO2-fixation flux. When two sequential enzymes of the cyanobacterial Calvin cycle were incorporated into an E. coli strain, the flux of the CO2-fixing bypass pathway accounts for 13 % of that of the central carbon metabolic pathway. The value was increased to 17 % when the carbonic anhydrase involved in the cyanobacterial carbon concentrating mechanism was introduced, indicating that low intracellular CO2 concentration is one limiting factor for CO2 fixation in E. coli. The engineered CO2-fixing E. coli with carbonic anhydrase was able to fix CO2 at a rate of 19.6 mg CO2 L(-1) h(-1) or the specific rate of 22.5 mg CO2 g DCW(-1) h(-1). This CO2-fixation rate is comparable with the reported rates of 14 autotrophic cyanobacteria and algae (10.5-147.0 mg CO2 L(-1) h(-1) or the specific rates of 3.5-23.7 mg CO2 g DCW(-1) h(-1)). The ability of CO2 fixation was created and improved in E. coli by incorporating partial cyanobacterial Calvin cycle and carbon concentrating mechanism, respectively. Quantitative analysis revealed that the CO2-fixation rate of this strain is comparable with that of the autotrophic cyanobacteria and algae, demonstrating great potential of heterotrophic CO2 fixation.

DISCRETE FIXED POINT THEOREMS AND THEIR APPLICATION TO NASH EQUILIBRIUM

OpenAIRE

Sato, Junichi; Kawasaki, Hidefumi

2007-01-01

Fixed point theorems are powerful tools in not only mathematics but also economic. In some economic problems, we need not real-valued but integer-valued equilibriums. However, classical fixed point theorems guarantee only real-valued equilibria. So we need discrete fixed point theorems in order to get discrete equilibria. In this paper, we first provide discrete fixed point theorems, next apply them to a non-cooperative game and prove the existence of a Nash equilibrium of pure strategies.

Fracture Characteristics Analysis of Double-layer Rock Plates with Both Ends Fixed Condition

Directory of Open Access Journals (Sweden)

S. R. Wang

2014-07-01

Full Text Available In order to research on the fracture and instability characteristics of double-layer rock plates with both ends fixed, the three-dimension computational model of double-layer rock plates under the concentrated load was built by using PFC3D technique (three-dimension particle flow code, and the mechanical parameters of the numerical model were determined based on the physical model tests. The results showed the instability process of the double-layer rock plates had four mechanical response phases: the elastic deformation stage, the brittle fracture of upper thick plate arching stage, two rock-arch bearing stage and two rock-arch failure stage; moreover, with the rock plate particle radius from small to large change, the maximum vertical force of double rock-arch appeared when the particle size was a certain value. The maximum vertical force showed an upward trend with the increase of the rock plate temperature, and in the case of the same thickness the maximum vertical force increased with the increase of the upper rock plate thickness. When the boundary conditions of double-layer rock plates changed from the hinged support to the fixed support, the maximum horizontal force observably decreased, and the maximum vertical force showed small fluctuations and then tended towards stability with the increase of cohesive strength of double-layer rock plates.

Controlling cyanobacterial blooms in hypertrophic Lake Taihu, China: will nitrogen reductions cause replacement of non-N2 fixing by N2 fixing taxa?

Directory of Open Access Journals (Sweden)

Hans W Paerl

Full Text Available Excessive anthropogenic nitrogen (N and phosphorus (P inputs have caused an alarming increase in harmful cyanobacterial blooms, threatening sustainability of lakes and reservoirs worldwide. Hypertrophic Lake Taihu, China's third largest freshwater lake, typifies this predicament, with toxic blooms of the non-N2 fixing cyanobacteria Microcystis spp. dominating from spring through fall. Previous studies indicate N and P reductions are needed to reduce bloom magnitude and duration. However, N reductions may encourage replacement of non-N2 fixing with N2 fixing cyanobacteria. This potentially counterproductive scenario was evaluated using replicate, large (1000 L, in-lake mesocosms during summer bloom periods. N+P additions led to maximum phytoplankton production. Phosphorus enrichment, which promoted N limitation, resulted in increases in N2 fixing taxa (Anabaena spp., but it did not lead to significant replacement of non-N2 fixing with N2 fixing cyanobacteria, and N2 fixation rates remained ecologically insignificant. Furthermore, P enrichment failed to increase phytoplankton production relative to controls, indicating that N was the most limiting nutrient throughout this period. We propose that Microcystis spp. and other non-N2 fixing genera can maintain dominance in this shallow, highly turbid, nutrient-enriched lake by outcompeting N2 fixing taxa for existing sources of N and P stored and cycled in the lake. To bring Taihu and other hypertrophic systems below the bloom threshold, both N and P reductions will be needed until the legacy of high N and P loading and sediment nutrient storage in these systems is depleted. At that point, a more exclusive focus on P reductions may be feasible.

Development of a rotary clap mechanism for positive-displacement rotary pumps: Kinematic analysis and working principle

International Nuclear Information System (INIS)

Shim, Sung Bo; Kim, Kyeong Uk; Park, Young Jun; Kim, Jong Mun

2015-01-01

A five-bar spatial mechanism named as a rotary clap mechanism is developed as a pumping device for positive displacement rotary pumps. The mechanism comprises a driving crank, a shaft link with two pins and two gears mounted on the middle and both ends, two rotors with jaws equally spaced along their circumferences, and two fixed internal gears. As the crank rotates, the gear pin-jointed to the crank rotates about the crank pin and at the same time rotates about the center of the fixed internal gears like a hypo-cyclic gear train. The gear-attached shaft link also rotates about the crank pin and about the fixed internal gears at the same time. This motion of the shaft link makes the pins rotate about the center of the fixed internal gears with a periodically varying radius. Therefore, two rotors driven by the pins rotate with different angular velocities. One rotor alternately leads and lags relative to the other rotor. These lead-lag motions between the two jaws of the rotors, which result in suction and discharge required for pumping, resemble hand clapping from which the mechanism was named. Construction and design parameters of the rotary clap mechanism are introduced, and kinematic analysis of this mechanism is performed. The relationships among design parameters, inherent constraints, and effects of design parameters on the is placement of mechanism are also presented.

Extending RTA/Linux with fixed-priority scheduling with deferred preemption

NARCIS (Netherlands)

Bergsma, M.; Holenderski, M.J.; Bril, R.J.; Lukkien, J.J.; Petters, S.M.; Zijlstra, P.

2009-01-01

Fixed-Priority Scheduling with Deferred Preemption (FPDS) is a middle ground between Fixed-Priority Pre-emptive Scheduling and Fixed-Priority Non-preemptive Scheduling, and offers advantages with respect to context switch overhead and resource access control. In this paper we present our work on

Characteristic Studies of Micron Zinc Particle Hydrolysis in a Fixed Bed Reactor

Directory of Open Access Journals (Sweden)

Lv Ming

2015-09-01

Full Text Available Zinc fuel is considered as a kind of promising energy sources for marine propeller. As one of the key steps for zinc marine energy power system, zinc hydrolysis process had been studied experimentally in a fixed bed reactor. In this study, we focus on the characteristics of micron zinc particle hydrolysis. The experimental results suggested that the steam inner diffusion is the controlling step of accumulative zinc particles hydrolysis reaction at a relative lower temperature and a relative higher water partial pressure. In other conditions, the chemical reaction kinetics was the controlling step. And two kinds of chemical reaction kinetics appeared in experiments: the surface reaction and the gas-gas reaction. The latter one occurs usually for larger zinc particles and high reaction temperature. Temperature seems to be one of the most important parameters for the dividing of different reaction mechanisms. Several parameters of the hydrolysis process including heating rate, water partial pressure, the particle size and temperature were also studied in this paper. Results show that the initial reaction temperature of zinc hydrolysis in fixed bed is about 410°C. And the initial reaction temperature increases as the heating rate increases and as the water partial pressure decreases. The total hydrogen yield increases as the heating rate decreases, as the water partial pressure increases, as the zinc particle size decreases, and as the reaction temperature increases. A hydrogen yield of more than 81.5% was obtained in the fixed bed experiments.

Accuracy Constraint Determination in Fixed-Point System Design

Directory of Open Access Journals (Sweden)

Serizel R

2008-01-01

Full Text Available Most of digital signal processing applications are specified and designed with floatingpoint arithmetic but are finally implemented using fixed-point architectures. Thus, the design flow requires a floating-point to fixed-point conversion stage which optimizes the implementation cost under execution time and accuracy constraints. This accuracy constraint is linked to the application performances and the determination of this constraint is one of the key issues of the conversion process. In this paper, a method is proposed to determine the accuracy constraint from the application performance. The fixed-point system is modeled with an infinite precision version of the system and a single noise source located at the system output. Then, an iterative approach for optimizing the fixed-point specification under the application performance constraint is defined and detailed. Finally the efficiency of our approach is demonstrated by experiments on an MP3 encoder.

Some fixed point theorems in fuzzy reflexive Banach spaces

International Nuclear Information System (INIS)

Sadeqi, I.; Solaty kia, F.

2009-01-01

In this paper, we first show that there are some gaps in the fixed point theorems for fuzzy non-expansive mappings which are proved by Bag and Samanta, in [Bag T, Samanta SK. Fixed point theorems on fuzzy normed linear spaces. Inf Sci 2006;176:2910-31; Bag T, Samanta SK. Some fixed point theorems in fuzzy normed linear spaces. Inform Sci 2007;177(3):3271-89]. By introducing the notion of fuzzy and α- fuzzy reflexive Banach spaces, we obtain some results which help us to establish the correct version of fuzzy fixed point theorems. Second, by applying Theorem 3.3 of Sadeqi and Solati kia [Sadeqi I, Solati kia F. Fuzzy normed linear space and it's topological structure. Chaos, Solitons and Fractals, in press] which says that any fuzzy normed linear space is also a topological vector space, we show that all topological version of fixed point theorems do hold in fuzzy normed linear spaces.

Conception and fabrication of a real time automatic correlator (multi-correlator); Etude et realisation d'un correlateur automatique (multicorrelateur) fonctionnant en temps reel

Energy Technology Data Exchange (ETDEWEB)

Berthier, D [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

The purpose of this work is to elaborate a specific computer able to display the real.time correlation function of two variables represented by two electrical signals. The various functions to be done are dealt with the best suited technology: delays from numerical method, hybrid multiplication, analog integration. This method proved very versatile so that it has been possible to modify the circuits with more performing components without changing the general conception of the whole system. In particular, the bandwidth, which was originally 125 kHz (1966) is now 1 MHz and will be 5 MHz, January 1968. Many results are obtained from the correlator such as: - determination of pulse responses of linear systems (1. and 2. order filters, oscillating circuits); - extraction of signals from noise; - measurement of time and space correlation in a turbulent plasma; - treatment of electro-biological signals. (author) [French] Nous nous sommes proposes de concevoir un calculateur specialise pour l'estimation en temps reel de la fonction de correlation de deux phenomenes representes par deux tensions electriques. Il a ete retenu les procedes de calcul s'adaptant le mieux aux diverses fonctions a realiser: retard par une technique numerique, multiplication hybride, integration analogique. Cette methode s'est revelee tres souple d'emploi: en effet les circuits ont pu etre modifies, sans changer la conception de l'appareil, au fur et a mesure de l'evolution des performances des composants electroniques. Ainsi la bande passante de l'appareil qui initialement etait de 125 KHz (1966) est actuellement de 1 MHz et sera 5 MHz en janvier 1968. De nombreux resultats ont ete obtenus avec l'appareil: - determination de reponses impulsionnelles de systemes lineaires (filtres 1er ordre, 2eme ordre, circuit oscillant, etc... ); - detection de signaux dans le bruit; - mesure de correlation spatiale et temporelle dans le plasma - traitement de signaux electrobiologiques. (auteur)

Formation of N2 in the fixed-bed pyrolysis of low rank coals and the mechanisms; Koteisho netsubunkai ni okeru teitankatan kara no N2 no sisei

Energy Technology Data Exchange (ETDEWEB)

Wu, Z.; Otsuka, Y. [Tohoku University, Sendai (Japan). Institute for Chemical Reaction Science

1996-10-28

In order to establish coal NOx preventive measures, discussions were given on formation of N2 in the fixed-bed pyrolysis of low rank coals and the mechanisms thereof. Chinese ZN coal and German RB coal were used for the discussions. Both coals do not produce N2 at 600{degree}C, and the main product is volatile nitrogen. Conversion into N2 does not depend on heating rates, but increases linearly with increasing temperature, and reaches 65% to 70% at 1200{degree}C. In contrast, char nitrogen decreases linearly with the temperature. More specifically, these phenomena suggest that the char nitrogen or its precursor is the major supply source of N2. When mineral substances are removed by using hydrochloric acid, their catalytic action is lost, and conversion into N2 decreases remarkably. Iron existing in ion-exchanged condition in low-rank coal is reduced and finely diffused into metallic iron particles. The particles react with heterocyclic nitrogen compounds and turn into iron nitride. A solid phase reaction mechanism may be conceived, in which N2 is produced due to decomposition of the iron nitride. 5 refs., 4 figs., 1 tab.

Characterizations of fixed points of quantum operations

International Nuclear Information System (INIS)

Li Yuan

2011-01-01

Let φ A be a general quantum operation. An operator B is said to be a fixed point of φ A , if φ A (B)=B. In this note, we shall show conditions under which B, a fixed point φ A , implies that B is compatible with the operation element of φ A . In particular, we offer an extension of the generalized Lueders theorem.

Fixed or Rotating Night Shift Work Undertaken by Women: Implications for Fertility and Miscarriage.

Science.gov (United States)

Fernandez, Renae C; Marino, Jennifer L; Varcoe, Tamara J; Davis, Scott; Moran, Lisa J; Rumbold, Alice R; Brown, Hannah M; Whitrow, Melissa J; Davies, Michael J; Moore, Vivienne M

2016-03-01

This review summarizes the evidence concerning effects of night shift work on women's reproductive health, specifically difficulty in conceiving and miscarriage. We distinguish between fixed night shift and rotating night shift, as the population subgroups exposed, the social and biological mechanisms, and the magnitude of effects are likely to differ; of note, women working fixed night shift are known to have high tolerance for this schedule. We identified two relevant systematic reviews with meta-analyses and five additional studies. Night shift work may give rise to menstrual cycle disturbances, but effect sizes are imprecise. Endometriosis may be elevated in night shift workers, but evidence is only preliminary. Adequate data are lacking to assess associations between night shift work and infertility or time to pregnancy. The weight of evidence begins to point to working at night, whether in fixed or rotating shifts, as a risk factor for miscarriage. There are many methodological problems with this literature, with substantial variation in the definitions of night shift and schedule types making comparisons between studies difficult and pooling across studies questionable. Nevertheless, there appears to be grounds for caution and counselling where women have concerns about night shift work and their reproductive health. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Nebivolol and valsartan as a fixed-dose combination for the treatment of hypertension.

Science.gov (United States)

Sander, Gary E; Giles, Thomas D

2015-04-01

The fixed-dose combination of nebivolol and valsartan drug has been clinically evaluated and demonstrated to represent a unique combination of nebivolol, a selective β1-adrenoceptor antagonist and a β3-adrenoceptor agonist; β3 receptor activation increases endothelial nitric oxide and produces vasodilation. Valsartan is highly selective angiotensin AT1 receptor blocker and exerts its major pharmacological effect by decreasing angiotensin II-induced vasoconstriction and production of aldosterone. The addition of nebivolol counteracts the effects of increased angiotensin II concentrations resulting from potent AT1 blockade. This review describes a recently completed trial establishing the efficacy of the nebivolol/valsartan combination. This review provides a literature search of pertinent pharmacological and clinical data that describes the mechanisms of both drugs individually and the results of a clinical trial comparing fixed-dose combinations of nebivolol with valsartan as compared with each drug as monotherapy. Fixed-dose combination drugs are intended to improve patient compliance and reduce drug costs, as well as to reduce long-term cardiovascular event rates and block counter-regulatory effects due to monotherapy. The vast majority of hypertensive patients will require at least two medications. We believe that the clinical evidence suggests that the combination of nebivolol with valsartan offers a definite clinical benefit, combining β1-adrenoceptor and angiotensin AT1 receptor blockade with β3 receptor activation and resultant increase in nitric oxide and vasodilation.

48 CFR 46.307 - Fixed-price research and development contracts.

Science.gov (United States)

2010-10-01

... REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 46.307 Fixed-price research and development... Development—Fixed-Price, in solicitations and contracts for research and development when (1) the primary... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Fixed-price research and...

Control and navigation system for a fixed-wing unmanned aerial vehicle

Directory of Open Access Journals (Sweden)

Ruiyong Zhai

2014-02-01

Full Text Available This paper presents a flight control and navigation system for a fixed-wing unmanned aerial vehicle (UAV with low-cost micro-electro-mechanical system (MEMS sensors. The system is designed under the inner loop and outer loop strategy. The trajectory tracking navigation loop is the outer loop of the attitude loop, while the attitude control loop is the outer loop of the stabilization loop. The proportional-integral-derivative (PID control was adopted for stabilization and attitude control. The three-dimensional (3D trajectory tracking control of a UAV could be approximately divided into lateral control and longitudinal control. The longitudinal control employs traditional linear PID feedback to achieve the desired altitude of the UAV, while the lateral control uses a non-linear control method to complete the desired trajectory. The non-linear controller can automatically adapt to ground velocity change, which is usually caused by gust disturbance, thus the UAV has good wind resistance characteristics. Flight tests and survey missions were carried out with our self-developed delta fixed-wing UAV and MEMS-based autopilot to confirm the effectiveness and practicality of the proposed navigation method.

48 CFR 1816.202 - Firm-fixed-price contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Firm-fixed-price contracts. 1816.202 Section 1816.202 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE ADMINISTRATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 1816.202 Firm...

Fixed-point data-collection method of video signal

International Nuclear Information System (INIS)

Tang Yu; Yin Zejie; Qian Weiming; Wu Xiaoyi

1997-01-01

The author describes a Fixed-point data-collection method of video signal. The method provides an idea of fixed-point data-collection, and has been successfully applied in the research of real-time radiography on dose field, a project supported by National Science Fund

A model for integrated dictionaries of fixed expressions

DEFF Research Database (Denmark)

Bergenholtz, Henning; Bothma, Theo; Gouws, Rufus

2011-01-01

This paper discusses a project for the creation of a theoretical model for integrated e-dictionaries, illustrated by means of an e-information tool for the presentation and treatment of fixed expressions using Afrikaans as example language. To achieve this a database of fixed expressions...

PDF fit in the fixed-flavour-number scheme

Energy Technology Data Exchange (ETDEWEB)

Alekhin, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Institute for High Energy Physics, Moscow (Russian Federation); Bluemlein, J.; Moch, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

2012-02-15

We discuss the heavy-quark contribution to deep inelastic scattering in the scheme with n{sub f}=3;4;5 fixed flavors. Based on the recent ABM11 PDF analysis of world data for deep-inelastic scattering and fixed-target data for the Drell-Yan process with the running-mass definition for heavy quarks we show that fixed flavor number scheme is sufficient for describing the deep-inelastic-scattering data in the entire kinematic range. We compare with other PDF sets and comment on the implications for measuring the strong coupling constant {alpha}{sub s}(M{sub Z}).

Design and control of a vertical takeoff and landing fixed-wing unmanned aerial vehicle

Science.gov (United States)

Malang, Yasir

With the goal of extending capabilities of multi-rotor unmanned aerial vehicles (UAVs) for wetland conservation missions, a novel hybrid aircraft design consisting of four tilting rotors and a fixed wing is designed and built. The tilting rotors and nonlinear aerodynamic effects introduce a control challenge for autonomous flight, and the research focus is to develop and validate an autonomous transition flight controller. The overall controller structure consists of separate cascaded Proportional Integral Derivative (PID) controllers whose gains are scheduled according to the rotors' tilt angle. A control mechanism effectiveness factor is used to mix the multi-rotor and fixed-wing control actuators during transition. A nonlinear flight dynamics model is created and transition stability is shown through MATLAB simulations, which proves gain-scheduled control is a good fit for tilt-rotor aircraft. Experiments carried out using the prototype UAV validate simulation results for VTOL and tilted-rotor flight.

Studies on Tasar Cocoon Cooking Using Permeation Method

Science.gov (United States)

Javali, Uday C.; Malali, Kiran B.; Ramya, H. G.; Naik, Subhas V.; Padaki, Naveen V.

2018-02-01

Cocoon cooking is an important process before reeling of tasar silk yarn. Cooking ensures loosening of the filaments in the tasar cocoons thereby easing the process of yarn withdrawal during reeling process. Tasar cocoons have very hard shell and hence these cocoons need chemical cooking process to loosen the silk filaments. Attempt has been made in this article to study the effect of using vacuum permeation chamber for tasar cocoon cooking in order to reduce the cooking time and improve the quality of tasar silk yarn. Vacuum assisted permeation cooking method has been studied in this article on tasar daba cocoons for cooking efficiency, deflossing and reelability. Its efficiency has been evaluated with respect to different cooking methods viz, traditional and open pan cooking methods. The tasar silk produced after reeling process has been tested for fineness, strength and cohesion properties. Results indicate that permeation method of tasar cooking ensures uniform cooking with higher efficiency along with better reeling performance and improved yarn properties.

Detection of African swine fever virus from formalin fixed and non-fixed tissues by polymerase chain reaction

Directory of Open Access Journals (Sweden)

P. D. Luka

2014-10-01

Full Text Available Aim: Formalin fixing and paraffin embedding of tissue samples is one of the techniques for preserving the structural integrity of cells for a very long time. However, extraction and analysis of genomic material from formalin fixed tissue (FFT remains a challenge despite numerous attempts to develop a more effective method. The success of polymerase chain reaction (PCR depends on the quality of DNA extract. Materials and Methods: Here we assessed the conventional method of DNA extraction from FFT for African swine fever virus (ASFV detection. The modified conventional method gave a higher quality DNA when compared with commercially available DNA extraction kits (QIAamp® DNA Mini Kit, DNeasy® Blood and Tissue Kit, and ZR Genomic DNA™ Tissue MiniPrep. Results: An average A260/A280 DNA purity of 0.86-1.68 and 3.22-5.32 μg DNA/mg for formalin fixed and non-fixed tissues, respectively using a conventional method. In a reproducible and three times repeat PCR, the ASFV DNA expected product size of 278 bp was obtained from the DNA extract of the conventional method but not from the DNA extract of the commercial kits. Conclusion: The present study has demonstrated that the conventional method extracts ASFV genome better than commercial kit. In summary, the commercial kit extraction appeared not suitable to purify ASFV DNA from FFT. We, therefore, recommend that the use of the conventional method be considered for African swine fever DNA extraction from FFT.

Revisiting the dilatation operator of the Wilson-Fisher fixed point

Energy Technology Data Exchange (ETDEWEB)

Liendo, Pedro [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group

2017-01-15

We revisit the order ε dilatation operator of the Wilson-Fisher fixed point obtained by Kehrein, Pismak, and Wegner in light of recent results in conformal field theory. Our approach is algebraic and based only on symmetry principles. The starting point of our analysis is that the first correction to the dilatation operator is a conformal invariant, which implies that its form is fixed up to an infinite set of coefficients associated with the scaling dimensions of higher-spin currents. These coefficients can be fixed using well-known perturbative results, however, they were recently re-obtained using CFT arguments without relying on perturbation theory. Our analysis then implies that all order-ε scaling dimensions of the Wilson-Fisher fixed point can be fixed by symmetry.

Membrane potentials of membranes with fixed ionic sites

NARCIS (Netherlands)

van den Berg, Albert; van der Wal, P.D.; van der Wal, P.D.; Skowronska-ptasinska, M.; Sudhölter, E.J.R.; Sudholter, Ernst; Bergveld, Piet; Reinhoudt, David

1990-01-01

A theoretical model has been developed to simulate the formation of a membrane potential as a function of physically accessible parameters. The description is an extension of the well-known Teorell-Meyer-Sievers (TMS) model, now including free and fixed ionic sites and free and fixed neutral

A new automatic fixed peak technology of microcontroller

International Nuclear Information System (INIS)

Huang Liguo; Wang Dequan; Zhang Damin; Li Jun; Liu Yuwen; Guo Qingxue; Wang Guifeng

1999-01-01

The microcontroller automatic fixed peak technology which differs from fashion half channel fixed peak is described. It bases on the principles of selecting double single channel and readjusting the voltage of power source. This technology is suitable to the industrial isotope instruments with various radioactive sources

IMPLICATION OF THE FIXED COMBINATIONS IN THE HYPERTENSION TREATMENT

Directory of Open Access Journals (Sweden)

Z. D. Kobalava

2010-01-01

Full Text Available The role of fixed combinations in the hypertension (HT treatment is discussed. Theoretical and practical aspects of combination therapy, principles of rational combination therapy are present. Current guidelines on the use of fixed dose combinations, including start antihypertensive therapy are analyzed. Classification of combinations, advantages and limitations of some of them implementation are also presented. Significance of beta-blocker bisoprolol and thiazide diuretic hydrochlorothiazide fixed combination (Lodoz is shown in HT treatment.

National Radiological Fixed Lab Data

Data.gov (United States)

U.S. Environmental Protection Agency — The National Radiological Fixed Laboratory Data Asset includes data produced in support of various clients such as other EPA offices, EPA Regional programs, DOE,...

Investigation of Jc-Suppressing Factors in Flat-Rolled Sr0.6K0.4Fe2As2Fe Tapes Via Microstructure Analysis

KAUST Repository

Zhang, Xianping

2015-01-13

Pnictide superconductors will be very promising for applications if wires with high critical current density Jc can allow reel-to-reel large-scale fabrication at low costs. To understand the mechanism(s) that limited Jc in flat-rolled Sr0.6K0.4Fe2As2(Sr122) tapes, microstructure analysis has been considered the most direct and efficient way. Here, we report on high-resolution microstructure imaging and analysis on Fe-sheathed flat-rolled Sr122 tapes, which have a Jc as high as 2.3 × 104 A/cm2 at 10 T and 4.2 K. The overlapping nature of the Sr122 plates was clearly observed. Transmission electron microscopy/scanning transmission electron microscopy analysis showed that, besides the cracks formed during the fabrication process, the SrO2 phase and cavities caused by the inhomogeneously dispersed Sr and K are the other important factors suppressing Jc. The wetting phase FeAs at the grain boundaries can be partially substituted by Sn in Sn-added samples. Our findings provide insights that pave the way to further enhance the critical current of the rolled 122 tapes up to the practical level.

Report of the Fixed-Target Proton-Accelerator Group

International Nuclear Information System (INIS)

Abe, K.; Bunce, G.; Fisk, G.

1982-01-01

The fixed target proton accelerator group divided itself into two roughly equal parts. One sub-group concentrated on a high intensity (10 14 protons/sec) moderate energy (30 GeV) machine while the other worked on a moderate intensity (5 x 10 11 protons/sec) very high energy (20 TeV) machine. For experiments where the total available energy is adequate, the fixed target option added to a anti p p 20 TeV collider ring has several attractive features: (1) high luminosity afforded by intense beams striking thick solid targets; (2) secondary beams of hadrons, photons, and leptons; and (3) the versatility of a fixed target facility, where many experiments can be performed independently. The proposed experiments considered by the subgroup, including neutrino, photon, hadron, and very short lived particle beams were based both on scaled up versions of similar experiments proposed for Tevatron II at Fermilab and on the 400 GeV fixed target programs at Fermilab and CERN

PWR integral tie plate and locking mechanism

International Nuclear Information System (INIS)

Flora, B.S.; Osborne, J.L.

1980-01-01

A locking mechanism for securing an upper tie plate to the tie rods of a nuclear fuel bundle is described. The mechanism includes an upper tie plate assembly and locking sleeves fixed to the ends of the tie rods. The tie plate is part of the upper tie plate assembly and is secured to the fuel bundle by securing the entire upper tie plate assembly to the locking sleeves fixed to the tie rods. The assembly includes, in addition to the tie plate, locking nuts for engaging the locking sleeves, retaining sleeves to operably connect the locking nuts to the assembly, a spring biased reaction plate to restrain the locking nuts in the locked position and a means to facilitate the removal of the entire assembly as a unit from the fuel bundle

Nitrogen availability for nitrogen fixing cyanobacteria upon growth ...

African Journals Online (AJOL)

The filamentous cyanobacterium Nostoc PCC 7120 is able to convert dinitrogen to ammonia in the absence of combined nitrogen. The expression of 20% of coding sequences from all major metabolic categories was examined in nitrogen fixing and non-nitrogen fixing growth conditions. The expression data were correlated ...

Is the Price Right? An Analysis of ETP's Fixed Fees.

Science.gov (United States)

Moore, Richard W.; Blake, Daniel R.; Honig, Michele L.; Cohen, Michael D.

The Employment Training Panel (ETP) contracted with California State University-Northridge to review the fixed fee structure ETP used to pay contractors for training provided under ETP. Three research questions were investigated: what other institutions use the fixed fee and what they pay for; whether ETP's fixed-fee rates were reasonable in…

Electroplated superconducting wire

International Nuclear Information System (INIS)

Peger, C.H.

1991-01-01

A hard chromium solution has been considered the least efficient of all plating solutions. This is not exactly true if the correct plating conditions are used. The accepted efficiency is only 12% but that is only true for the parameters that were used long ago to make the determination. At 12% efficiency it would be impossible to plate Superconductor wire. The world's chromium plating shops have been plating at a .001 (.025u) per hour rate since the turn of the century. Shops in the Cleveland, Ohio area have been limiting their plating rate to .006 (152u) since 1935. A few have used .012 (304u) to .030 (762u) per hour for specialized jobs. These figures would indicate the apparent efficiency of the old 100 to 1 chromium, sulfate solution can be higher than 60%. The industry uses a 3 bus bar tank with wide spacing between anode and cathode. This results in high solution resistance and high heat generation and consequently slow plating rates. The Reversible Rack 2 Bus Bar System uses very close anode to cathode spacings. This results in the high plating rates with improved quality deposits. When first asked to chromium plate pure nickel wire reel to reel in long lengths, companies making reel to reel machines were asked if chromium plating was practical. In every case, the answer was it couldn't be done. Gold, tin and zinc plating was being done reel to reel. Using the same parameters that were used to determine a chromium solution efficiency was only 12%, these other metal solutions check out close to 100%

[Dynamic analysis of the rigid fixed bridge and related tissue after intrusion of abutment with micro screw implant].

Science.gov (United States)

Zhu, Lin; Xu, Pei-cheng; Lu, Liu-lei

2013-08-01

To study the variety of mechanical behavior of fixed bridge after abutments being intruded by micro screw implant and to provide theoretical principles for clinical practice of teeth preparation after intrusion of abutments under dynamic loads. Two-dimensional images of maxilla, teeth and supporting tissues of healthy people were scanned by spiral CT and were synthesized by Mimics10.01, Ansys13.0, etc. The three-dimensional finite element mathematical model of rigid fixed bridge repairing on double end of maxillary molar was developed. Under the condition of 10% simulative abutment alveolar absorption, vertical and oblique dynamic forces were applied in a circle of mastication(0.875 s) to build mathematical model after the abutment had been intruded for 0.5, 1.0, 1.5 and 2.0 mm. Stress variety of prosthesis, teeth, periodontal ligaments and supporting tissues were compared before and after intrusion of abutments. Stress variety of the prosthesis occurred, which had close relationship with the structure of prosthesis and teeth, the areas of periodontal ligaments increased, stress on the whole decreased along with the increase of the length of intrusion. With time accumulating, the stress value in prosthesis, teeth, periodontal ligaments and supporting tissues increased gradually and loads in oblique direction induced peak value stress in a masticatory cycle. Some residual stress left after unloading. By preparing the fixed bridge after abutment intrusion by micro screw implant, the service life of abutment and fixed bridge prosthesis can be reduced. The abutment and its related tissue have time-dependent mechanical behaviors during one mastication. The influence of oblique force on stress was greater than vertical force. There is some residual stress left after one mastication period. With the increase of the intrusion on abutment, residual stress reduced.

Combined GPS/GLONASS Precise Point Positioning with Fixed GPS Ambiguities

Science.gov (United States)

Pan, Lin; Cai, Changsheng; Santerre, Rock; Zhu, Jianjun

2014-01-01

Precise point positioning (PPP) technology is mostly implemented with an ambiguity-float solution. Its performance may be further improved by performing ambiguity-fixed resolution. Currently, the PPP integer ambiguity resolutions (IARs) are mainly based on GPS-only measurements. The integration of GPS and GLONASS can speed up the convergence and increase the accuracy of float ambiguity estimates, which contributes to enhancing the success rate and reliability of fixing ambiguities. This paper presents an approach of combined GPS/GLONASS PPP with fixed GPS ambiguities (GGPPP-FGA) in which GPS ambiguities are fixed into integers, while all GLONASS ambiguities are kept as float values. An improved minimum constellation method (MCM) is proposed to enhance the efficiency of GPS ambiguity fixing. Datasets from 20 globally distributed stations on two consecutive days are employed to investigate the performance of the GGPPP-FGA, including the positioning accuracy, convergence time and the time to first fix (TTFF). All datasets are processed for a time span of three hours in three scenarios, i.e., the GPS ambiguity-float solution, the GPS ambiguity-fixed resolution and the GGPPP-FGA resolution. The results indicate that the performance of the GPS ambiguity-fixed resolutions is significantly better than that of the GPS ambiguity-float solutions. In addition, the GGPPP-FGA improves the positioning accuracy by 38%, 25% and 44% and reduces the convergence time by 36%, 36% and 29% in the east, north and up coordinate components over the GPS-only ambiguity-fixed resolutions, respectively. Moreover, the TTFF is reduced by 27% after adding GLONASS observations. Wilcoxon rank sum tests and chi-square two-sample tests are made to examine the significance of the improvement on the positioning accuracy, convergence time and TTFF. PMID:25237901

Combined GPS/GLONASS Precise Point Positioning with Fixed GPS Ambiguities

Directory of Open Access Journals (Sweden)

Lin Pan

2014-09-01

Full Text Available Precise point positioning (PPP technology is mostly implemented with an ambiguity-float solution. Its performance may be further improved by performing ambiguity-fixed resolution. Currently, the PPP integer ambiguity resolutions (IARs are mainly based on GPS-only measurements. The integration of GPS and GLONASS can speed up the convergence and increase the accuracy of float ambiguity estimates, which contributes to enhancing the success rate and reliability of fixing ambiguities. This paper presents an approach of combined GPS/GLONASS PPP with fixed GPS ambiguities (GGPPP-FGA in which GPS ambiguities are fixed into integers, while all GLONASS ambiguities are kept as float values. An improved minimum constellation method (MCM is proposed to enhance the efficiency of GPS ambiguity fixing. Datasets from 20 globally distributed stations on two consecutive days are employed to investigate the performance of the GGPPP-FGA, including the positioning accuracy, convergence time and the time to first fix (TTFF. All datasets are processed for a time span of three hours in three scenarios, i.e., the GPS ambiguity-float solution, the GPS ambiguity-fixed resolution and the GGPPP-FGA resolution. The results indicate that the performance of the GPS ambiguity-fixed resolutions is significantly better than that of the GPS ambiguity-float solutions. In addition, the GGPPP-FGA improves the positioning accuracy by 38%, 25% and 44% and reduces the convergence time by 36%, 36% and 29% in the east, north and up coordinate components over the GPS-only ambiguity-fixed resolutions, respectively. Moreover, the TTFF is reduced by 27% after adding GLONASS observations. Wilcoxon rank sum tests and chi-square two-sample tests are made to examine the significance of the improvement on the positioning accuracy, convergence time and TTFF.

Quantum entanglement and fixed-point bifurcations

International Nuclear Information System (INIS)

Hines, Andrew P.; McKenzie, Ross H.; Milburn, G.J.

2005-01-01

How does the classical phase-space structure for a composite system relate to the entanglement characteristics of the corresponding quantum system? We demonstrate how the entanglement in nonlinear bipartite systems can be associated with a fixed-point bifurcation in the classical dynamics. Using the example of coupled giant spins we show that when a fixed point undergoes a supercritical pitchfork bifurcation, the corresponding quantum state--the ground state--achieves its maximum amount of entanglement near the critical point. We conjecture that this will be a generic feature of systems whose classical limit exhibits such a bifurcation

Elevated Fixed Platform Test Facility

Data.gov (United States)

Federal Laboratory Consortium — The Elevated Fixed Platform (EFP) is a helicopter recovery test facility located at Lakehurst, NJ. It consists of a 60 by 85 foot steel and concrete deck built atop...

Optimal Licensing Strategy: Royalty or Fixed Fee?

OpenAIRE

Andrea Fosfuri; Esther Roca

2004-01-01

Licensing a cost-reducing innovation through a royalty has been shown to be superior to licensing by means of a fixed fee for an incumbent licensor. This note shows that this result relies crucially on the assumption that the incumbent licensor can sell its cost-reducing inno-vation to all industry players. If, for any reason, only some competitors could be reached through a licensing contract, then a fixed fee might be optimally chosen.

10 CFR 603.315 - Advantages of a fixed-support TIA.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Advantages of a fixed-support TIA. 603.315 Section 603.315... fixed-support TIA. In situations where the use of a fixed-support TIA is permissible (see §§ 603.305 and... TIA, the contracting officer can eliminate or reduce some post-award requirements that sometimes are...

die doeltreffendheid van die afrikaanse woordelys en spelreels

African Journals Online (AJOL)

sluiting by die reel vir die verdubbeling van medeklinkers na 'n kort, be- klemtoonde klinker, woorde soos ballet, ballon, terras, terrein, dissipel en dissipline slegs met een konsonant na die eerste vokaal gespel moes word, omdat daardie voorafgaande vokaal onbeklemtoon is. Ook hierdie uit- sondering op die reel word ...

Drying kinetics characteristic of Indonesia lignite coal (IBC) using lab scale fixed bed reactor

Energy Technology Data Exchange (ETDEWEB)

Kang, TaeJin; Jeon, DoMan; Namkung, Hueon; Jang, DongHa; Jeon, Youngshin; Kim, Hyungtaek [Ajou Univ., Suwon (Korea, Republic of). Div. of Energy Systems Research

2013-07-01

Recent instability of energy market arouse a lot of interest about coal which has a tremendous amount of proven coal reserves worldwide. South Korea hold the second rank by importing 80 million tons of coal in 2007 following by Japan. Among various coals, there is disused coal. It's called Low Rank Coal (LRC). Drying process has to be preceded before being utilized as power plant. In this study, drying kinetics of LRC is induced by using a fixed bed reactor. The drying kinetics was deduced from particle size, the inlet gas temperature, the drying time, the gas velocity, and the L/D ratio. The consideration on Reynold's number was taken for correction of gas velocity, particle size, and the L/D ratio was taken for correction packing height of coal. It can be found that active drying of free water and phase boundary reaction is suitable mechanism through the fixed bed reactor experiments.

Torque resistance of different stainless steel wires commonly used for fixed retainers in orthodontics

DEFF Research Database (Denmark)

Arnold, Dario; Dalstra, Michel; Verna, Carlalberta

2016-01-01

Objective: Movements of teeth splinted by fixed retention wires after orthodontic treatment have been observed. The aetiological factors for these movements are unknown. The aim of this in vitro study was to compare the resistance to torque of different stainless steel wires commonly used for fixed...... retainers in orthodontics. Materials and Methods: Torquing moments acting on a retainer wire were measured in a mechanical force testing system by applying buccal crown torque to an upper lateral incisor in both a 3-teeth and in a 2-teeth setup. Seven stainless steel wires with different shape, type (plain...... or a braided 0.016 × 0.022-inch stainless steel wire. A tooth attached by a retainer wire to only one neighbouring tooth is less resistant to torque than a tooth connected to two neighbouring teeth. Annealing a retainer wire with a flame reduces the stiffness of the wire markedly and can lead to a non...

Gauge-fixing parameter dependence of two-point gauge-variant correlation functions

International Nuclear Information System (INIS)

Zhai, C.

1996-01-01

The gauge-fixing parameter ξ dependence of two-point gauge-variant correlation functions is studied for QED and QCD. We show that, in three Euclidean dimensions, or for four-dimensional thermal gauge theories, the usual procedure of getting a general covariant gauge-fixing term by averaging over a class of covariant gauge-fixing conditions leads to a nontrivial gauge-fixing parameter dependence in gauge-variant two-point correlation functions (e.g., fermion propagators). This nontrivial gauge-fixing parameter dependence modifies the large-distance behavior of the two-point correlation functions by introducing additional exponentially decaying factors. These factors are the origin of the gauge dependence encountered in some perturbative evaluations of the damping rates and the static chromoelectric screening length in a general covariant gauge. To avoid this modification of the long-distance behavior introduced by performing the average over a class of covariant gauge-fixing conditions, one can either choose a vanishing gauge-fixing parameter or apply an unphysical infrared cutoff. copyright 1996 The American Physical Society

Fixed points of occasionally weakly biased mappings

OpenAIRE

Y. Mahendra Singh, M. R. Singh

2012-01-01

Common fixed point results due to Pant et al. [Pant et al., Weak reciprocal continuity and fixed point theorems, Ann Univ Ferrara, 57(1), 181-190 (2011)] are extended to a class of non commuting operators called occasionally weakly biased pair[ N. Hussain, M. A. Khamsi A. Latif, Commonfixed points for JH-operators and occasionally weakly biased pairs under relaxed conditions, Nonlinear Analysis, 74, 2133-2140 (2011)]. We also provideillustrative examples to justify the improvements. Abstract....

On BLM scale fixing in exclusive processes

International Nuclear Information System (INIS)

Anikin, I.V.; Pire, B.; Szymanowski, L.; Teryaev, O.V.; Wallon, S.

2005-01-01

We discuss the BLM scale fixing procedure in exclusive electroproduction processes in the Bjorken regime with rather large x B . We show that in the case of vector meson production dominated in this case by quark exchange the usual way to apply the BLM method fails due to singularities present in the equations fixing the BLM scale. We argue that the BLM scale should be extracted from the squared amplitudes which are directly related to observables. (orig.)

On BLM scale fixing in exclusive processes

Energy Technology Data Exchange (ETDEWEB)

Anikin, I.V. [JINR, Bogoliubov Laboratory of Theoretical Physics, Dubna (Russian Federation); Universite Paris-Sud, LPT, Orsay (France); Pire, B. [Ecole Polytechnique, CPHT, Palaiseau (France); Szymanowski, L. [Soltan Institute for Nuclear Studies, Warsaw (Poland); Univ. de Liege, Inst. de Physique, Liege (Belgium); Teryaev, O.V. [JINR, Bogoliubov Laboratory of Theoretical Physics, Dubna (Russian Federation); Wallon, S. [Universite Paris-Sud, LPT, Orsay (France)

2005-07-01

We discuss the BLM scale fixing procedure in exclusive electroproduction processes in the Bjorken regime with rather large x{sub B}. We show that in the case of vector meson production dominated in this case by quark exchange the usual way to apply the BLM method fails due to singularities present in the equations fixing the BLM scale. We argue that the BLM scale should be extracted from the squared amplitudes which are directly related to observables. (orig.)

Competition and facilitation between unicellular nitrogen-fixing cyanobacteria and non-nitrogen-fixing phytoplankton species

NARCIS (Netherlands)

Agawin, N.S.; Rabouille, S.; Veldhuis, M.; Servatius, L.; Hol, S.; van Overzee, H.M.J.; Huisman, J.

2007-01-01

Abstract: Recent discoveries show that small unicellular nitrogen-fixing cyanobacteria are more widespread than previously thought and can make major contributions to the nitrogen budget of the oceans. We combined theory and experiments to investigate competition for nitrogen and light between these

IR fixed points in SU(3 gauge theories

Directory of Open Access Journals (Sweden)

K.-I. Ishikawa

2015-09-01

Full Text Available We propose a novel RG method to specify the location of the IR fixed point in lattice gauge theories and apply it to the SU(3 gauge theories with Nf fundamental fermions. It is based on the scaling behavior of the propagator through the RG analysis with a finite IR cutoff, which we cannot remove in the conformal field theories in sharp contrast to the confining theories. The method also enables us to estimate the anomalous mass dimension in the continuum limit at the IR fixed point. We perform the program for Nf=16,12,8 and Nf=7 and indeed identify the location of the IR fixed points in all cases.

Should mobile Internet be an extension to the fixed web? Fixed-mobile reinforcement as mediator between context of use and future use

NARCIS (Netherlands)

de Reuver, M.; Ongena, G.; Bouwman, H.

2013-01-01

As the fixed and mobile Internet are converging, the question emerges whether consumers expect mobile Internet services to replicate services they know from the fixed Internet. Literature on reinforcement and displacement suggests that the use of new media depends on whether users are inclined to

ORIGINAL Some Generalized Fixed Point Results on Compact ...

African Journals Online (AJOL)

Abstract. The goal of this research is to study some generalized fixed point results in compact metric space. It mainly focuses on the existence and unique fixed point of a selfmap on a compact metric space and its generalizations. In this study iterative techniques due to. Edelstein, Bhardwaj et al. and Sastry et al. are used to ...

[Microanalytical determinations of gold alloys for fixed dentures].

Science.gov (United States)

Lotito, M; Negri, P; Fraschini, M

1993-01-01

In this work the authors analyse gold alloys for fixed prosthesis by X-ray spectrometry in energy dispersion (EDS). The results of this analysis, given in graphic and table form, show remarkable differences in alloy composition. For this reason recommended dentists are to be attentive and severe in the control of gold alloys for fixed prosthesis.

75 FR 9531 - Magnuson-Stevens Act Provisions; Correction

Science.gov (United States)

2010-03-03

... for comment are not required pursuant to 5 U.S.C. 553, or any other law, the analytical requirements..., rod and reel, spear, trap, slurp gun, hand harvest. C. Charter fishery C. Bandit gear, buoy gear..., gillnet, hand harvest, seine, slurp gun, trap, spear, rod and reel, hook and line. 12. Recreational...

Going to the MALL: Mobile Assisted Language Learning

Science.gov (United States)

Chinnery, George M.

2006-01-01

Practically since their availability, a succession of audiovisual recording devices (e.g., reel-to-reel, VCRs, PCs) has been used to capture language samples, and myriad playback and broadcast devices (e.g., phonographs, radios, televisions) have provided access to authentic speech samples. The espousal of audiolingual theory in the 1950s brought…

High Critical Current in Metal Organic Derived YBCO Films

Science.gov (United States)

2010-10-31

process, particularly in reel-to- reel manufacturing equipment. During Phase I, a “three-step” conversion process was developed to de- convolute the...Task 3. After reaction, the 40-mm web was coated on both sides with a silver layer then slit into eight 4-mm width tapes which were laminated between

47 CFR 80.705 - Hours of service of Alaska-public fixed stations.

Science.gov (United States)

2010-10-01

... SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Alaska Fixed Stations § 80.705 Hours of service of Alaska-public fixed stations. Each Alaska-public fixed station whose hours of service are not... 47 Telecommunication 5 2010-10-01 2010-10-01 false Hours of service of Alaska-public fixed...

Effect of Fixed Metallic Oral Appliances on Oral Health.

Science.gov (United States)

Alnazzawi, Ahmad

2018-01-01

There is a substantial proportion of the population using fixed metallic oral appliances, such as crowns and bridges, which are composed of various dental alloys. These restorations may be associated with a number of effects on oral health with variable degrees of severity, to review potential effects of using fixed metallic oral appliances, fabricated from various alloys. The MEDLINE/PubMed database was searched using certain combinations of keywords related to the topic. The search revealed that burning mouth syndrome, oral pigmentation, hypersensitivity and lichenoid reactions, and genotoxic and cytotoxic effects are the major potential oral health changes associated with fixed prosthodontic appliances. Certain oral disorders are associated with the use of fixed metallic oral appliances. Patch test is the most reliable method that can be applied for identifying metal allergy, and the simultaneous use of different alloys in the mouth is discouraged.

ConSpeciFix: Classifying prokaryotic species based on gene flow.

Science.gov (United States)

Bobay, Louis-Marie; Ellis, Brian Shin-Hua; Ochman, Howard

2018-05-16

Classification of prokaryotic species is usually based on sequence similarity thresholds, which are easy to apply but lack a biologically-relevant foundation. Here, we present ConSpeciFix, a program that classifies prokaryotes into species using criteria set forth by the Biological Species Concept, thereby unifying species definition in all domains of life. ConSpeciFix's webserver is freely available at www.conspecifix.com. The local version of the program can be freely downloaded from https://github.com/Bobay-Ochman/ConSpeciFix. ConSpeciFix is written in Python 2.7 and requires the following dependencies: Usearch, MCL, MAFFT and RAxML. ljbobay@uncg.edu.

Fixed-time stabilization of impulsive Cohen-Grossberg BAM neural networks.

Science.gov (United States)

Li, Hongfei; Li, Chuandong; Huang, Tingwen; Zhang, Wanli

2018-02-01

This article is concerned with the fixed-time stabilization for impulsive Cohen-Grossberg BAM neural networks via two different controllers. By using a novel constructive approach based on some comparison techniques for differential inequalities, an improvement theorem of fixed-time stability for impulsive dynamical systems is established. In addition, based on the fixed-time stability theorem of impulsive dynamical systems, two different control protocols are designed to ensure the fixed-time stabilization of impulsive Cohen-Grossberg BAM neural networks, which include and extend the earlier works. Finally, two simulations examples are provided to illustrate the validity of the proposed theoretical results. Copyright © 2017 Elsevier Ltd. All rights reserved.

48 CFR 216.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 216.203 Section 216.203 Federal Acquisition Regulations System DEFENSE... CONTRACTS Fixed-Price Contracts 216.203 Fixed-price contracts with economic price adjustment. ...

Tranexamic acid-induced fixed drug eruption

Directory of Open Access Journals (Sweden)

Natsuko Matsumura

2015-01-01

Full Text Available A 33-year-old male showed multiple pigmented patches on his trunk and extremities after he took tranexamic acid for common cold. He stated that similar eruptions appeared when he was treated with tranexamic acid for influenza 10 months before. Patch test showed positive results at 48 h and 72 h by 1% and 10% tranexamic acid at the lesional skin only. To our knowledge, nine cases of fixed drug eruption induced by tranexamic acid have been reported in Japan. Tranexamic acid is a safe drug and frequently used because of its anti-fibrinolytic and anti-inflammatory effects, but caution of inducing fixed drug eruption should be necessary.

Fixed mass and scaling sum rules

International Nuclear Information System (INIS)

Ward, B.F.L.

1975-01-01

Using the correspondence principle (continuity in dynamics), the approach of Keppell-Jones-Ward-Taha to fixed mass and scaling current algebraic sum rules is extended so as to consider explicitly the contributions of all classes of intermediate states. A natural, generalized formulation of the truncation ideas of Cornwall, Corrigan, and Norton is introduced as a by-product of this extension. The formalism is illustrated in the familiar case of the spin independent Schwinger term sum rule. New sum rules are derived which relate the Regge residue functions of the respective structure functions to their fixed hadronic mass limits for q 2 → infinity. (Auth.)

[Single- and multi-unit fixed dental prostheses in relation to the occlusal system].

Science.gov (United States)

Witter, D J; Gerritsen, A E; van Spijker, A; Creugers, N H J

2013-02-01

Occlusion concepts based on functional aspects offer more solid ground in the diagnostic process and in the treatment of (reduced) dentitions than morphologically and mechanically oriented occlusion concepts. Nevertheless, for occlusal reconstruction morphologically oriented guidelines are necessary. These guidelines are based on the border movements and positions of the mandible in the orofacial system, and on the location and modelling of the occlusal contacts in the occlusal system. The modelling of single- and multi-unit fixed dental prostheses must harmonize with the occlusal system. Moreover, an important feature is the relation of the anterior teeth which enables mutually protected occlusion. Characteristics of a healthy orofacial and occlusal system are: absence of pathology, perceived sufficient oral functions, variability inform and function, and adaptive capacity. When designing single- or multiunit fixed dental prostheses, a pragmatic starting point is to maintain the existing occlusion and the existing speech pattern unless arguments can be provided for alterations. The occlusal design should aim at optimizing oral functions, such as mandibular and occlusal stability.

The Basic Economics of Match Fixing in Sport Tournaments

OpenAIRE

Raul Caruso

2009-01-01

Match-fixing is a recurring phenomenon of sport contests. This paper presents a simple formal model in order to explain them. The intuition behind is that an asymmetry in the evaluation of the stake is the key factor leading to match-fixing or to tacit collusion. In particular, it will be demonstrated that an asymmetry in the evaluation of the stake can lead to a concession from one agent to the other and then to a match-fixing. It is also demonstrated that when the asymmetry in the evaluatio...

Analyzing and Predicting Effort Associated with Finding and Fixing Software Faults

Science.gov (United States)

Hamill, Maggie; Goseva-Popstojanova, Katerina

2016-01-01

Context: Software developers spend a significant amount of time fixing faults. However, not many papers have addressed the actual effort needed to fix software faults. Objective: The objective of this paper is twofold: (1) analysis of the effort needed to fix software faults and how it was affected by several factors and (2) prediction of the level of fix implementation effort based on the information provided in software change requests. Method: The work is based on data related to 1200 failures, extracted from the change tracking system of a large NASA mission. The analysis includes descriptive and inferential statistics. Predictions are made using three supervised machine learning algorithms and three sampling techniques aimed at addressing the imbalanced data problem. Results: Our results show that (1) 83% of the total fix implementation effort was associated with only 20% of failures. (2) Both safety critical failures and post-release failures required three times more effort to fix compared to non-critical and pre-release counterparts, respectively. (3) Failures with fixes spread across multiple components or across multiple types of software artifacts required more effort. The spread across artifacts was more costly than spread across components. (4) Surprisingly, some types of faults associated with later life-cycle activities did not require significant effort. (5) The level of fix implementation effort was predicted with 73% overall accuracy using the original, imbalanced data. Using oversampling techniques improved the overall accuracy up to 77%. More importantly, oversampling significantly improved the prediction of the high level effort, from 31% to around 85%. Conclusions: This paper shows the importance of tying software failures to changes made to fix all associated faults, in one or more software components and/or in one or more software artifacts, and the benefit of studying how the spread of faults and other factors affect the fix implementation

Finite volume QCD at fixed topological charge

OpenAIRE

Aoki, Sinya; Fukaya, Hidenori; Hashimoto, Shoji; Onogi, Tetsuya

2007-01-01

In finite volume the partition function of QCD with a given $\\theta$ is a sum of different topological sectors with a weight primarily determined by the topological susceptibility. If a physical observable is evaluated only in a fixed topological sector, the result deviates from the true expectation value by an amount proportional to the inverse space-time volume 1/V. Using the saddle point expansion, we derive formulas to express the correction due to the fixed topological charge in terms of...

47 CFR 25.277 - Temporary fixed earth station operations.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Temporary fixed earth station operations. 25.277 Section 25.277 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Technical Operations § 25.277 Temporary fixed earth station operations...

48 CFR 5416.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 5416.203 Section 5416.203 Federal Acquisition Regulations System DEFENSE LOGISTICS AGENCY, DEPARTMENT OF DEFENSE TYPES OF CONTRACTS Fixed Price Contracts 5416.203 Fixed-price...

Supersymmetric mechanics. Vol. 2. The attractor mechanism and space time singularities

International Nuclear Information System (INIS)

Bellucci, S.; Marrani, A.; Ferrara, S.

2006-01-01

This is the second volume in a series of books on the general theme of Supersymmetric Mechanics; the series is based on lectures and discussions held in 2005 and 2006 at the INFN-Laboratori Nazionali di Frascati. The first volume appears as Lect. Notes Physics, Vol. 698 ''Supersymmetric Mechanics, Vol.1: Supersymmetry, Noncommutativity and Matrix Models'' (2006) ISBN: 3-540-33313-4. The present extensive lecture supplies a pedagogical introduction, at the non-expert level, to the attractor mechanism in space-time singularities. In such a framework, supersymmetry seems to be related to dynamical systems with fixed points, describing the equilibrium state and the stability features of the thermodynamics of black holes. After a qualitative overview, explicit examples realizing the attractor mechanism are treated at some length; they include relevant cases of asymptotically flat, maximal and non-maximal, extended supergravities in 4 and 5 dimensions. A number of recent advances along various directions of research on the attractor mechanism are also given. (orig.)

Mechanical properties of materials used for temporary fixed dentures – in vitro study

Directory of Open Access Journals (Sweden)

Celej-Piszcz Elzbieta

2017-06-01

Full Text Available Objectives. The objective of the research was to define the mechanical properties of currently marketed temporary filling materials. Methods. Eight temporary filling materials: Boston, Dentalon, Protemp II, Revotek LC, Structure 2, Structure 3, UniFast LC, UniFast Trad were used to make 5 samples each of measurements 2 × 2 × 25 mm, in order to define the flexural strength, and 10 rings each of measurements 2 × 5 mm, in order to carry out the Vickers micro-hardness test. After preparation, the samples were stored in distilled water of temperature of 370°C, for 7 days. Subsequently, flexural strength and Vickers hardness testing was undertaken. Results. Composite temporary materials showed considerably better mechanical properties, both in flexural strength and in Vickers micro-hardness testing. Conclusions. the best mechanical properties, both in terms of flexural strength, as well as Vickers micro-hardness test can be observe among composite materials.

Impact of Shaft Stiffness on Inertial Response of Fixed Speed Wind Turbines

Institute of Scientific and Technical Information of China (English)

2012-01-01

Future power＇ system faces several challenges, one of them is the high penetration level of intermittent wind power generation, providing small or even no inertial response and being not contributing to the frequency stability. The effect of shaft stiffness on inertial response of fixed speed wind turbines is presented. Four different drive-train models based on the multi-body system are developed. The small-signal analysis demonstrates no significant differences between models in terms of electro-mechanical eigen-values for increasing shaft stiffness. The natural resonance frequency of drive-train torsion modes shows slightly different values between damped and undamped models, but no significant differences are found in the number-mass models. Time-domain simulations show the changes in the active power contribution of a wind farm based on a fixed speed wind turbine during the system frequency disturbance. The changes in the kinetic energy during the dynamic process are calculated and their contribution to the inertia constant is small and effective. The largest contribution of the kinetic energy is provided at the beginning of the system frequency disturbance to reduce the rate of the frequency change, it is positive for the frequency stability.

Can mushrooms fix atmospheric nitrogen?

Indian Academy of Sciences (India)

Unknown

Introduction. Rhizobium is a genus of symbiotic N2-fixing soil bacteria that induce ... To produce biofilm cultures, a 2 × 2 cm yeast manitol agar. (YMA) slab was .... determination of antibiotic susceptibilities of bacterial biofilms;. J. Clin. Microbiol.

Approximate solutions of common fixed-point problems

CERN Document Server

Zaslavski, Alexander J

2016-01-01

This book presents results on the convergence behavior of algorithms which are known as vital tools for solving convex feasibility problems and common fixed point problems. The main goal for us in dealing with a known computational error is to find what approximate solution can be obtained and how many iterates one needs to find it. According to know results, these algorithms should converge to a solution. In this exposition, these algorithms are studied, taking into account computational errors which remain consistent in practice. In this case the convergence to a solution does not take place. We show that our algorithms generate a good approximate solution if computational errors are bounded from above by a small positive constant. Beginning with an introduction, this monograph moves on to study: · dynamic string-averaging methods for common fixed point problems in a Hilbert space · dynamic string methods for common fixed point problems in a metric space · dynamic string-averaging version of the proximal...

İhracata Dayalı Büyüme Hipotezi: Türkiye Uygulaması

Directory of Open Access Journals (Sweden)

İsmail KÜÇÜKAKSOY

2015-09-01

Full Text Available Bu çalışma Türkiye ekonomisi için 2003:1Q ve 2015:Q1 çeyreklik veriler kullanılarak “İhracata Dayalı Büyüme Hipotezi”nin geçerliliği test etmeyi amaçlamaktadır. Hipotez, reel ihracattan reel Gayri Safi Yurtiçi Hasıla’ya (GSYİH doğru nedensellik ilişkisi olduğunu iddia etmektedir. Çalışmada, Johansen koentegrasyon testi, Gregory-Hansen koentegrasyon testi, Toda-Yamamoto nedensellik testi, Tam Düzeltilmiş En Küçük Kareler Yöntemi (FMOLS, “Kanonik Koentegrasyon Regresyonu (CCR” ve “Dinamik En Küçük Kareler Yöntemi (DOLS” kullanılmıştır. Testler sonucunda elde edilen bulgular şunlardır: a Değişkenler arasında, Johansen koentegrasyon testine göre uzun dönemli bir ilişki yokken, Gregory-Hansen koentegrasyon testine göre uzun dönemli bir ilişki tespit edilmiştir; b Toda-Yamamoto testine göre reel ihracat ile reel GSYİH arasında çift yönlü nedensellik vardır. Bu bulgu Türkiye için ihracata dayalı büyüme hipotezinin geçerliliğini ispatlamaktadır; c FMOLS, CCR, DOLS yöntemlerine göre, uzun dönemde reel ihracatta meydana gelen %1’lik bir artış reel GSYİH’yı sırasıyla %1.5195, %1.5552, %1.3171 oranlarında arttırmaktadır. Her üç yöntem de ihracata dayalı büyüme hipotezini Türkiye ekonomisi için ispatlamaktadır.

48 CFR 16.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 16.203 Section 16.203 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 16.203 Fixed-price...

48 CFR 916.203 - Fixed-price contracts with economic price adjustments.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustments. 916.203 Section 916.203 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 916.203 Fixed...

48 CFR 1216.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 1216.203 Section 1216.203 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 1216.203 Fixed...

48 CFR 416.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 416.203 Section 416.203 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 416.203 Fixed...

48 CFR 3016.203 - Fixed price contracts with economic price adjustments.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Fixed price contracts with economic price adjustments. 3016.203 Section 3016.203 Federal Acquisition Regulations System DEPARTMENT OF... TYPES OF CONTRACTS Fixed-Price Contracts 3016.203 Fixed price contracts with economic price adjustments. ...

48 CFR 616.203 - Fixed-Price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Fixed-Price contracts with economic price adjustment. 616.203 Section 616.203 Federal Acquisition Regulations System DEPARTMENT OF STATE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 616.203 Fixed...

48 CFR 1316.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 1316.203 Section 1316.203 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 1316.203 Fixed...

Fixed drug eruption resulting from fluconazole use: a case report

Directory of Open Access Journals (Sweden)

Tavallaee Mahkam

2009-07-01

Full Text Available Abstract Introduction Fluconazole is a widely used antifungal agent with a possible side effect of fixed drug eruption. However, this adverse drug effect is absent from the reported list of possible side effects of fluconazole. We are presenting a rare case in our report. Case presentation A 25-year-old Iranian woman developed fixed drug eruptions on different sites of her body after taking five doses of fluconazole to treat vaginal candidiasis. A positive patch test, positive oral challenge test and skin biopsy were all found to be consistent with fixed drug eruption. Conclusion Fluconazole is a widely prescribed drug, used mainly to treat candidiasis. Fixed drug eruption as a possible side effect of Fluconazole is not well known and thus, the lesions may be misdiagnosed and mistreated. Based on our findings, which are consistent with a number of other practitioners, we recommend adding fixed drug eruption to the list of possible side effects of fluconazole.

16 CFR 1205.1 - Scope of the standard.

Science.gov (United States)

2010-01-01

... requirements of the standard apply to rotary mowers. The labeling requirements apply to both rotary and reel...-behind rotary and reel-type power lawn mowers manufactured or imported on or after the effective date of... mm) that employs an engine or motor as a power source. Section 3(a)(1) of the Consumer Product Safety...

Fixing of various simulated radioactive wastes in urea-formaldehyde resin

International Nuclear Information System (INIS)

Du Dahai; Wei Peng

1986-01-01

This paper outlines the results of the fixing of a variety of simulated radioactive wastes in the urea-formaldehyde resin. The radioactive waste materials fixed include spent ion exchange resin, concentrates of NaNO 3 -NaBO 2 as well as NaBO 2 and sludge. The performance of the fixed products has been improved by means of selecting the synthetic conditions of resin, a suitable hardener and an inorganic additive

Analysis of the Flicker Level Produced by a Fixed-Speed Wind Turbine

Science.gov (United States)

Suppioni, Vinicius; P. Grilo, Ahda

2013-10-01

In this article, the analysis of the flicker emission during continuous operation of a mid-scale fixed-speed wind turbine connected to a distribution system is presented. Flicker emission is investigated based on simulation results, and the dependence of flicker emission on short-circuit capacity, grid impedance angle, mean wind speed, and wind turbulence is analyzed. The simulations were conducted in different programs in order to provide a more realistic wind emulation and detailed model of mechanical and electrical components of the wind turbine. Such aim is accomplished by using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) to simulate the mechanical parts of the wind turbine, Simulink/MatLab to simulate the electrical system, and TurbSim to obtain the wind model. The results show that, even for a small wind generator, the flicker level can limit the wind power capacity installed in a distribution system.

A hierarchical model exhibiting the Kosterlitz-Thouless fixed point

International Nuclear Information System (INIS)

Marchetti, D.H.U.; Perez, J.F.

1985-01-01

A hierarchical model for 2-d Coulomb gases displaying a line stable of fixed points describing the Kosterlitz-Thouless phase transition is constructed. For Coulomb gases corresponding to Z sub(N)- models these fixed points are stable for an intermediate temperature interval. (Author) [pt

48 CFR 629.402-1 - Foreign fixed-price contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Foreign fixed-price contracts. 629.402-1 Section 629.402-1 Federal Acquisition Regulations System DEPARTMENT OF STATE GENERAL CONTRACTING REQUIREMENTS TAXES Contract Clauses 629.402-1 Foreign fixed-price contracts. ...

Efficacy and Tolerability of Fixed-Combination Brinzolamide/Timolol in Latin American Patients with Open-Angle Glaucoma or Ocular Hypertension Previously on Brimonidine/Timolol Fixed Combination

OpenAIRE

Alezzandrini, Arturo; Hubatsch, Douglas; Alfaro, Rene

2014-01-01

Introduction Fixed-combination glaucoma medications are commonly used to achieve target intraocular pressure (IOP) reduction in patients uncontrolled with monotherapy; however, ocular discomfort associated with eye drops can decrease adherence. This study assessed the efficacy and tolerability of twice-daily fixed-combination brinzolamide 1%/timolol 0.5% (BRINZ/TIM-FC) in Latin American patients transitioned from fixed-combination brimonidine 0.2%/timolol 0.5% (BRIM/TIM-FC) because of insuffi...

Design and analysis of the TFTR fixed limiters - 1

International Nuclear Information System (INIS)

Winkler, P.; Fixler, S.; Timlen, W.V.

1981-01-01

The operation of the Tokamak Fusion Test Reactor (TFTR) consists of two phases. In the first phase, the Tokamak systems will be tested and an ohmic heated plasma of 4 MW produced. The plasma limiter system for this phase consists of a set of movable and a set of fixed limiters. Because of the low power level during this phase, a design of passively cooled fixed limiters without tiles will satisfy the requirements. This limiter will be replaced by an actively cooled tile-covered axisymmetric limiter in the second phase. This paper discusses the design of the first phase fixed limiters only

Fixed Points in Discrete Models for Regulatory Genetic Networks

Directory of Open Access Journals (Sweden)

Orozco Edusmildo

2007-01-01

Full Text Available It is desirable to have efficient mathematical methods to extract information about regulatory iterations between genes from repeated measurements of gene transcript concentrations. One piece of information is of interest when the dynamics reaches a steady state. In this paper we develop tools that enable the detection of steady states that are modeled by fixed points in discrete finite dynamical systems. We discuss two algebraic models, a univariate model and a multivariate model. We show that these two models are equivalent and that one can be converted to the other by means of a discrete Fourier transform. We give a new, more general definition of a linear finite dynamical system and we give a necessary and sufficient condition for such a system to be a fixed point system, that is, all cycles are of length one. We show how this result for generalized linear systems can be used to determine when certain nonlinear systems (monomial dynamical systems over finite fields are fixed point systems. We also show how it is possible to determine in polynomial time when an ordinary linear system (defined over a finite field is a fixed point system. We conclude with a necessary condition for a univariate finite dynamical system to be a fixed point system.

29 CFR 1910.163 - Fixed extinguishing systems, water spray and foam.

Science.gov (United States)

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Fixed extinguishing systems, water spray and foam. 1910.163... Suppression Equipment § 1910.163 Fixed extinguishing systems, water spray and foam. (a) Scope and application. This section applies to all fixed extinguishing systems, using water or foam solution as the...

Fixed points of IA-endomorphisms of a free metabelian Lie algebra

Indian Academy of Sciences (India)

Let be a free metabelian Lie algebra of finite rank at least 2. We show the existence of non-trivial fixed points of an -endomorphism of and give an algorithm detecting them. In particular, we prove that the fixed point subalgebra Fix of an -endomorphism of is not finitely generated.

Complications of fixed infrared emitters in computer-assisted total knee arthroplasties

Directory of Open Access Journals (Sweden)

Suárez-Vázquez Abelardo

2007-07-01

Full Text Available Abstract Background The first stage in the implant of a total knee arthroplasty with computer-assisted surgery is to fasten the emitters to the femur and the tibia. These trackers must be hard-fixed to the bone. The objectives of our study are to evaluate the technical problems and complications of these tracker-pins, the necessary time to fix them to the bone and the possible advantages of a new femoral-fixed tracker-pin. Methods Three hundred and sixty seven tracker-pins were used in one hundred and fifty one computer-assisted total knee replacements. A bicortical screw was used to fix the tracker to the tibia in all cases; in the femur, however, a bicortical tracker was used in 112 cases, while a new device (OrthoLock with percutaneous fixation pins was employed in the remaining 39. Results Technical problems related to the fixing of the trackers appeared in nine cases (2.5%. The mean surgery time to fix the tracker pin to the tibia was 3 minutes (range 2–7, and 5 minutes in the case of the femoral pin (range: 4–11, although with the new tool it was only three minutes (range 2–4 (p Conclusion The incidence of problems and complications with the fixing systems used in knee navigation is very small. The use of a new device with percutaneous pins facilitates the fixing of femoral trackers and decreases the time needed to place them.

Branes, superpotentials and superconformal fixed points

International Nuclear Information System (INIS)

Aharony, O.

1997-01-01

We analyze various brane configurations corresponding to field theories in three, four and five dimensions. We find brane configurations which correspond to three-dimensional N=2 and four-dimensional N=1 supersymmetric QCD theories with quartic superpotentials, in which what appear to be ''hidden parameters'' play an important role. We discuss the construction of five-dimensional N=1 supersymmetric gauge theories and superconformal fixed points using branes, which leads to new five-dimensional N=1 superconformal field theories. The same five-dimensional theories are also used, in a surprising way, to describe new superconformal fixed points of three-dimensional N=2 supersymmetric theories, which have both ''electric'' and ''magnetic'' Coulomb branches. (orig.)

Limb amputations in fixed dystonia: a form of body integrity identity disorder?

Science.gov (United States)

Edwards, Mark J; Alonso-Canovas, Araceli; Schrag, Arnette; Bloem, Bastiaan R; Thompson, Philip D; Bhatia, Kailash

2011-07-01

Fixed dystonia is a disabling disorder mainly affecting young women who develop fixed abnormal limb postures and pain after apparently minor peripheral injury. There is continued debate regarding its pathophysiology and management. We report 5 cases of fixed dystonia in patients who sought amputation of the affected limb. We place these cases in the context of previous reports of patients with healthy limbs and patients with chronic regional pain syndrome who have sought amputation. Our cases, combined with recent data regarding disorders of mental rotation in patients with fixed dystonia, as well as previous data regarding body integrity identity disorder and amputations sought by patients with chronic regional pain syndrome, raise the possibility that patients with fixed dystonia might have a deficit in body schema that predisposes them to developing fixed dystonia and drives some to seek amputation. The outcome of amputation in fixed dystonia is invariably unfavorable. Copyright © 2011 Movement Disorder Society.

FixO3: Advancement towards Open Ocean Observatory Data Management Harmonisation

Science.gov (United States)

Behnken, Andree; Pagnani, Maureen; Huber, Robert; Lampitt, Richard

2015-04-01

Since 2002 there has been a sustained effort, supported as European framework projects, to harmonise both the technology and the data management of Open Ocean fixed observatories run by European nations. FixO3 started in September 2013, and for 3 more years will coordinate the convergence of data management best practice across a constellation of moorings in the Atlantic, in both hemispheres, and in the Mediterranean. To ensure the continued existence of these unique sources of oceanographic data as sustained observatories it is vital to improve access to the data collected, both in terms of methods of presentation, real-time availability, long-term archiving and quality assurance. The data management component of FixO3 improves access to marine observatory data by harmonising data management standards, formats and workflows covering the complete life cycle of data from real time data acquisition to long-term archiving. Legal and data policy aspects have been examined and discussed to identify transnational barriers to open-access to marine observatory data. As a result, a harmonised FixO3 data policy was drafted, which provides a formal basis for data exchange between FixO3 infrastructures, and also enables open access to data for the general public. FixO3 interacts with other European infrastructures such as EMODnet, SeaDataNet, PANGAEA, and especially aims to harmonise efforts with OceanSites and MyOcean. The project landing page (www.fixo3.eu) offers detailed information about every observatory as well as data visualisations and direct downloads. In addition to this, metadata for all FixO3 - relevant data are available from the searchable FixO3 metadata catalogue, which is also accessible from the project web page. This catalogue is hosted by PANGAEA and receives updates in regular intervals. The FixO3 Standards & Services registry ties in with the GEOSS Components and Services Registry (CSR) and provides additional observatory information. The data management

Route Optimization for Offloading Congested Meter Fixes

Science.gov (United States)

Xue, Min; Zelinski, Shannon

2016-01-01

The Optimized Route Capability (ORC) concept proposed by the FAA facilitates traffic managers to identify and resolve arrival flight delays caused by bottlenecks formed at arrival meter fixes when there exists imbalance between arrival fixes and runways. ORC makes use of the prediction capability of existing automation tools, monitors the traffic delays based on these predictions, and searches the best reroutes upstream of the meter fixes based on the predictions and estimated arrival schedules when delays are over a predefined threshold. Initial implementation and evaluation of the ORC concept considered only reroutes available at the time arrival congestion was first predicted. This work extends previous work by introducing an additional dimension in reroute options such that ORC can find the best time to reroute and overcome the 'firstcome- first-reroute' phenomenon. To deal with the enlarged reroute solution space, a genetic algorithm was developed to solve this problem. Experiments were conducted using the same traffic scenario used in previous work, when an arrival rush was created for one of the four arrival meter fixes at George Bush Intercontinental Houston Airport. Results showed the new approach further improved delay savings. The suggested route changes from the new approach were on average 30 minutes later than those using other approaches, and fewer numbers of reroutes were required. Fewer numbers of reroutes reduce operational complexity and later reroutes help decision makers deal with uncertain situations.

Quantitative analysis of reflection electron energy loss spectra to determine electronic and optical properties of Fe–Ni alloy thin films

International Nuclear Information System (INIS)

Tahir, Dahlang; Oh, Sukh Kun; Kang, Hee Jae; Tougaard, Sven

2016-01-01

Highlights: • Electronic and optical properties of Fe-Ni alloy thin films grown on Si (1 0 0) were studied via quantitative analyses of reflection electron energy loss spectra (REELS). • The energy loss functions (ELF) are dominated by a plasmon peak at 23.6 eV for Fe and moves gradually to lower energies in Fe-Ni alloys towards the bulk plasmon energy of Ni at 20.5 eV. • Fe has a strong effect on the dielectric and optical properties of Fe-Ni alloy thin films even for an alloy with 72% Ni. Electronic and optical properties of Fe-Ni alloy thin films grown on Si (1 0 0) were studied via quantitative analyses of reflection electron energy loss spectra (REELS). - Abstract: Electronic and optical properties of Fe–Ni alloy thin films grown on Si (1 0 0) by ion beam sputter deposition were studied via quantitative analyses of reflection electron energy loss spectra (REELS). The analysis was carried out by using the QUASES-XS-REELS and QUEELS-ε(k,ω)-REELS softwares to determine the energy loss function (ELF) and the dielectric functions and optical properties by analyzing the experimental spectra. For Ni, the ELF shows peaks around 3.6, 7.5, 11.7, 20.5, 27.5, 67 and 78 eV. The peak positions of the ELF for Fe_2_8Ni_7_2 are similar to those of Fe_5_1Ni_4_9, even though there is a small peak shift from 18.5 eV for Fe_5_1Ni_4_9 to 18.7 eV for Fe_2_8Ni_7_2. A plot of n, k, ε_1, and ε_2 shows that the QUEELS-ε(k,ω)-REELS software for analysis of REELS spectra is useful for the study of optical properties of transition metal alloys. For Fe–Ni alloy with high Ni concentration (Fe_2_8Ni_7_2), ε_1, and ε_2 have strong similarities with those of Fe. This indicates that the presence of Fe in the Fe–Ni alloy thin films has a strong effect.

An introduction to nonlinear analysis and fixed point theory

CERN Document Server

Pathak, Hemant Kumar

2018-01-01

This book systematically introduces the theory of nonlinear analysis, providing an overview of topics such as geometry of Banach spaces, differential calculus in Banach spaces, monotone operators, and fixed point theorems. It also discusses degree theory, nonlinear matrix equations, control theory, differential and integral equations, and inclusions. The book presents surjectivity theorems, variational inequalities, stochastic game theory and mathematical biology, along with a large number of applications of these theories in various other disciplines. Nonlinear analysis is characterised by its applications in numerous interdisciplinary fields, ranging from engineering to space science, hydromechanics to astrophysics, chemistry to biology, theoretical mechanics to biomechanics and economics to stochastic game theory. Organised into ten chapters, the book shows the elegance of the subject and its deep-rooted concepts and techniques, which provide the tools for developing more realistic and accurate models for ...

The Social Construction of the Great Belt Fixed Link

DEFF Research Database (Denmark)

Munch, Birgitte

1994-01-01

Working paper in Technology Management. Actor Network theory (ANT) used upon the process of negotiating legislation and constructing the Great Belt fixed link.......Working paper in Technology Management. Actor Network theory (ANT) used upon the process of negotiating legislation and constructing the Great Belt fixed link....

48 CFR 216.306 - Cost-plus-fixed-fee contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Cost-plus-fixed-fee... SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Cost-Reimbursement Contracts 216.306 Cost-plus-fixed-fee contracts. (c) Limitations. (i) Except as provided in...

Fixed Points on Abstract Structures without the Equality Test

DEFF Research Database (Denmark)

Korovina, Margarita

2002-01-01

The aim of this talk is to present a study of definability properties of fixed points of effective operators on abstract structures without the equality test. The question of definability of fixed points of -operators on abstract structures with equality was first studied by Gandy, Barwise, Mosch...

Fixed-dose lercanidipine/enalapril for hypertension.

Science.gov (United States)

Menne, Jan; Haller, Hermann

2008-04-01

The dihydropyridine calcium channel blocker lercanidipine and the ACE inhibitor enalapril are frequently used in the treatment of hypertensive patients. In April 2007, a fixed-dose combination of the two drugs was approved in Germany for the treatment of patients not responding to monotherapy. It is expected that the drug will soon be available in the other European Union markets. In this review the present literature is summarized. Two doses will be available with 10 mg lercanidipine each and 10 or 20 mg enalapril. The medication should be taken once daily, optimally =15 minutes before a meal and the consumption of grapefruit juice should be avoided. The fixed-dose combination of the two drugs has a stronger blood pressure-lowering effect than monotherapy with 20 mg enalapril or 10 mg lercanidipine. The combination is well tolerated and few patients stopped the treatment because of side effects. As expected, the most common side effects reported are cough, peripheral edema, flushing, dizziness and vertigo, occurring in 1-5% of patients. This new fixed-dose combination is a useful adjunct to the present treatment and should increase compliance and help reduce hypertension-related costs. 2008 Prous Science, S.A.U. or its licensors

Effectiveness evaluation of alternative fixed-site safeguard security systems

International Nuclear Information System (INIS)

Chapman, L.D.

1976-01-01

An evaluation of a fixed-site physical protection system must consider the interrelationships of barriers, alarms, on-site and off-site guards, and their effectiveness against a forcible adversary attack intent on creating an act of sabotage of theft. A computer model, Forcible Entry Safeguard Effectiveness Model (FESEM), was developed for the evaluation of alternative fixed-site protection systems. It was written in the GASP IV simulation language. A hypothetical fixed-state protection system is defined and relative evaluations from a cost-effectiveness point of view are presented in order to demonstrate how the model can be used. Trade-offs involving on-site and off-site response forces and response times, perimeter system alarms, barrier configurations, and varying levels of threat are analyzed. The computer model provides a framework for performing inexpensive experiments on fixed-site security systems, for testing alternative decisions, and for determining the relative cost effectiveness associated with these decision policies

Celestial Navigation Fix Based on Particle Swarm Optimization

Directory of Open Access Journals (Sweden)

Tsou Ming-Cheng

2015-09-01

Full Text Available A technique for solving celestial fix problems is proposed in this study. This method is based on Particle Swarm Optimization from the field of swarm intelligence, utilizing its superior optimization and searching abilities to obtain the most probable astronomical vessel position. In addition to being applicable to two-body fix, multi-body fix, and high-altitude observation problems, it is also less reliant on the initial dead reckoning position. Moreover, by introducing spatial data processing and display functions in a Geographical Information System, calculation results and chart work used in Circle of Position graphical positioning can both be integrated. As a result, in addition to avoiding tedious and complicated computational and graphical procedures, this work has more flexibility and is more robust when compared to other analytical approaches.

Evolutionary algorithms applied to Landau-gauge fixing

International Nuclear Information System (INIS)

Markham, J.F.

1998-01-01

Current algorithms used to put a lattice gauge configuration into Landau gauge either suffer from the problem of critical slowing-down or involve an additions computational expense to overcome it. Evolutionary Algorithms (EAs), which have been widely applied to other global optimisation problems, may be of use in gauge fixing. Also, being global, they should not suffer from critical slowing-down as do local gradient based algorithms. We apply EA'S and also a Steepest Descent (SD) based method to the problem of Landau Gauge Fixing and compare their performance. (authors)

Electronic and optical properties of Fe, Pd, and Ti studied by reflection electron energy loss spectroscopy

International Nuclear Information System (INIS)

Tahir, Dahlang; Kraaer, Jens; Tougaard, Sven

2014-01-01

We have studied the electronic and optical properties of Fe, Pd, and Ti by reflection electron energy-loss spectroscopy (REELS). REELS spectra recorded for primary energies in the range from 300 eV to 10 keV were corrected for multiple inelastically scattered electrons to determine the effective inelastic-scattering cross section. The dielectric functions and optical properties were determined by comparing the experimental inelastic-electron scattering cross section with a simulated cross section calculated within the semi-classical dielectric response model in which the only input is Im(−1/ε) by using the QUEELS-ε(k,ω)-REELS software package. The complex dielectric functions ε(k,ω), in the 0–100 eV energy range, for Fe, Pd, and Ti were determined from the derived Im(−1/ε) by Kramers-Kronig transformation and then the refractive index n and extinction coefficient k. The validity of the applied model was previously tested and found to give consistent results when applied to REELS spectra at energies between 300 and 1000 eV taken at widely different experimental geometries. In the present paper, we provide, for the first time, a further test on its validity and find that the model also gives consistent results when applied to REELS spectra in the full range of primary electron energies from 300 eV to 10000 eV. This gives confidence in the validity of the applied method.

31 CFR 359.10 - What is the fixed rate of return?

Science.gov (United States)

2010-07-01

.... The composite rate is composed of both the fixed rate and a semiannual inflation rate, which could... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What is the fixed rate of return? 359... BONDS, SERIES I General Information § 359.10 What is the fixed rate of return? The Secretary, or the...

Renaissance of the ~1 TeV Fixed-Target Program

Energy Technology Data Exchange (ETDEWEB)

Adams, T.; /Florida State U.; Appel, Jeffrey A.; /Fermilab; Arms, Kregg Elliott; /Minnesota U.; Balantekin, A.B.; /Wisconsin U., Madison; Conrad, Janet Marie; /MIT; Cooper, Peter S.; /Fermilab; Djurcic, Zelimir; /Columbia U.; Dunwoodie, William M.; /SLAC; Engelfried, Jurgen; /San Luis Potosi U.; Fisher, Peter H.; /MIT; Gottschalk, E.; /Fermilab /Northwestern U.

2009-05-01

This document describes the physics potential of a new fixed-target program based on a {approx} TeV proton source. Two proton sources are potentially available in the future: the existing Tevatron at Fermilab, which can provide 800 GeV protons for fixed-target physics, and a possible upgrade to the SPS at CERN, called SPS+, which would produce 1 TeV protons on target. In this paper we use an example Tevatron fixed-target program to illustrate the high discovery potential possible in the charm and neutrino sectors. We highlight examples which are either unique to the program or difficult to accomplish at other venues.

Renaissance of the ~ 1-TeV Fixed-Target Program

Energy Technology Data Exchange (ETDEWEB)

Adams, T.; /Florida State U.; Appel, J.A.; /Fermilab; Arms, K.E.; /Minnesota U.; Balantekin, A.B.; /Wisconsin U., Madison; Conrad, J.M.; /MIT; Cooper, P.S.; /Fermilab; Djurcic, Z.; /Columbia U.; Dunwoodie, W.; /SLAC; Engelfried, J.; /San Luis Potosi U.; Fisher, P.H.; /MIT; Gottschalk, Erik Edward; /Fermilab; de Gouvea, A.; /Northwestern U.; Heller, K.; /Minnesota U.; Ignarra, C.M.; Karagiorgi, G.; /MIT; Kwan, S.; /Fermilab; Loinaz, W.A.; /Amherst Coll.; Meadows, B.; /Cincinnati U.; Moore, R.; Morfin, J.G.; /Fermilab; Naples, D.; /Pittsburgh U. /St. Mary' s Coll., Minnesota /New Mexico State U. /Michigan U. /Wayne State U. /South Carolina U. /Florida U. /Carnegie Mellon U. /Cincinnati U. /Columbia U. /Columbia U. /Northwestern U. /Yale U. /Fermilab /Argonne /Northwestern U. /APC, Paris

2011-12-02

This document describes the physics potential of a new fixed-target program based on a {approx}1 TeV proton source. Two proton sources are potentially available in the future: the existing Tevatron at Fermilab, which can provide 800 GeV protons for fixed-target physics, and a possible upgrade to the SPS at CERN, called SPS+, which would produce 1 TeV protons on target. In this paper we use an example Tevatron fixed-target program to illustrate the high discovery potential possible in the charm and neutrino sectors. We highlight examples which are either unique to the program or difficult to accomplish at other venues.

Design and dynamic simulation of a fixed pitch 56 kW wind turbine drive train with a continuously variable transmission

Science.gov (United States)

Gallo, C.; Kasuba, R.; Pintz, A.; Spring, J.

1986-01-01

The dynamic analysis of a horizontal axis fixed pitch wind turbine generator (WTG) rated at 56 kW is discussed. A mechanical Continuously Variable Transmission (CVT) was incorporated in the drive train to provide variable speed operation capability. One goal of the dynamic analysis was to determine if variable speed operation, by means of a mechanical CVT, is capable of capturing the transient power in the WTG/wind environment. Another goal was to determine the extent of power regulation possible with CVT operation.

Fixed points for weak contractions in metric type spaces

OpenAIRE

Gaba, Yaé Ulrich

2014-01-01

In this article, we prove some fixed point theorems in metric type spaces. This article is just a generalization some results previously proved in \\cite{niyi-gaba}. In particular, we give some coupled common fixed points theorems under weak contractions. These results extend well known similar results existing in the literature.

Anderson Acceleration for Fixed-Point Iterations

Energy Technology Data Exchange (ETDEWEB)

Walker, Homer F. [Worcester Polytechnic Institute, MA (United States)

2015-08-31

The purpose of this grant was to support research on acceleration methods for fixed-point iterations, with applications to computational frameworks and simulation problems that are of interest to DOE.

Physics landscape-fixed target energies

International Nuclear Information System (INIS)

Berger, E.L.

1989-10-01

An introductory review is presented of physics issues and opportunities at Fermilab fixed-target energies. Included are discussions of precision electroweak studies; deep inelastic lepton scattering; heavy quark production, spectroscopy, and decays; perturbative QCD; prompt photon production; massive lepton production; and spin dependence. 79 refs., 7 figs

The Court of Justice of the European Union and Fixed-term Work

DEFF Research Database (Denmark)

de la Porte, Caroline; Emmenegger, Patrick

2017-01-01

permanent workers and aims to prevent abuse of this contract form. Surprisingly, the Court of Justice of the European Union (CJEU) rulings in this area have by and large been neglected in comparative labour market research. We fill this gap by systematically analysing the CJEU case law concerning fixed......While fixed-term work benefits employers and increases the prospects of employability of various categories of workers, it is inherently precarious. The European Union (EU) directive on fixed-term work emphasizes the importance of equal treatment of workers on fixed-term contracts with comparable...... show that the equal treatment is affirmed in all cases under analysis for different provisions of labour contracts. With regard to abuse of recourse to fixed-term contracts, by contrast, the rulings still represent a zone of legal uncertainty, whereby some judgments allow for fixed-term contracts...

Antioxidant activity of dorzolamide/timolol fixed combination in neuroprotective therapy in glaucoma

Directory of Open Access Journals (Sweden)

N. I. Kurysheva

2012-01-01

Full Text Available Purpose: to study the antioxidant activity of carbonic anhydrase inhibitors and timolol fixed combinations and to compare it with other fixed combinations.Methods: Antioxidant activity (AOA of dorzolamide/timolol (Cosopt, dorzolamide/timolol (Dorzopt Plus, latanoprost/timolol, brimonidine/timolol, travoprost/timolol and bimatoprost/timolol fixed combinations was measured in vitro using the model of oxida- tive hemolysis.Results: Dorzolamide/timolol (Cosopt AOA was higher than that of other fixed combinations and increased with the quantity of the drugs added to the model system: 40%, 52% and 75% in 30 μl, 60 μl and 90 μl respectively.Conclusion: these findings suggest that dorzolamide/timolol fixed combination has potential advantages over the other fixed combinations due to its high antioxidant activity and might be used as the neuroptotective agent for glaucoma treatment.

Foreign exchange market microstructure and the WM/Reuters 4 pm fix

Directory of Open Access Journals (Sweden)

P.S. Michelberger

2016-03-01

Full Text Available A market fix serves as a benchmark for foreign exchange (FX execution, and is employed by many institutional investors to establish an exact reference at which execution takes place. The currently most popular FX fix is the World Market Reuters (WM/R 4 pm fix. Execution at the WM/R 4 pm fix is a service offered by FX brokers (normally banks, who deliver execution at the fix provided they obtain the trade order ahead of time. In this paper, we study the market microstructure around 4 pm. We demonstrate that market dynamics can be distinguished from other times during the day through increased volatility and size of movements. Our findings question the aggregate benefit to the client base of using the WM/R 4 pm fix in its current form.

THE MAIN QUESTION OF FIXED ASSETS

Directory of Open Access Journals (Sweden)

Kogan A. B.

2015-03-01

Full Text Available The article deals with the methods of selecting the best type of fixed assets (real investment. Explore the current situation where the investor has to compare the different-parametrical alternatives (DPA. The DPA are the fixed assets which have similar functions, but different in price, durability and periodic effects. In the general case the DPA are the investment projects which have different amounts of investment, accounting periods and net cash flow. Net present value (NPV and internal rate of return (IRR are criticized. The author describes his indicator «speed index of unit value increase» (IS. The author proves on numerical examples that the economy, the subjects of which use IS instead of NPV and IRR, has accelerated the pace of development.

Global unitary fixing and matrix-valued correlations in matrix models

International Nuclear Information System (INIS)

Adler, Stephen L.; Horwitz, Lawrence P.

2003-01-01

We consider the partition function for a matrix model with a global unitary invariant energy function. We show that the averages over the partition function of global unitary invariant trace polynomials of the matrix variables are the same when calculated with any choice of a global unitary fixing, while averages of such polynomials without a trace define matrix-valued correlation functions, that depend on the choice of unitary fixing. The unitary fixing is formulated within the standard Faddeev-Popov framework, in which the squared Vandermonde determinant emerges as a factor of the complete Faddeev-Popov determinant. We give the ghost representation for the FP determinant, and the corresponding BRST invariance of the unitary-fixed partition function. The formalism is relevant for deriving Ward identities obeyed by matrix-valued correlation functions

Total effective dose equivalent associated with fixed uranium surface contamination

International Nuclear Information System (INIS)

Bogard, J.S.; Hamm, R.N.; Ashley, J.C.; Turner, J.E.; England, C.A.; Swenson, D.E.; Brown, K.S.

1997-04-01

This report provides the technical basis for establishing a uranium fixed-contamination action level, a fixed uranium surface contamination level exceeding the total radioactivity values of Appendix D of Title 10, Code of Federal Regulations, part 835 (10CFR835), but below which the monitoring, posting, and control requirements for Radiological Areas are not required for the area of the contamination. An area of fixed uranium contamination between 1,000 dpm/100 cm 2 and that level corresponding to an annual total effective dose equivalent (TEDE) of 100 mrem requires only routine monitoring, posting to alert personnel of the contamination, and administrative control. The more extensive requirements for monitoring, posting, and control designated by 10CFR835 for Radiological Areas do not have to be applied for these intermediate fixed-contamination levels

A review of the Fermilab fixed-target program

Energy Technology Data Exchange (ETDEWEB)

Rameika, R. [Fermi National Accelerator Lab., Batavia, IL (United States)

1994-12-01

All eyes are now on the Fermilab collider program as the intense search for the top quark continues. Nevertheless, Fermilab`s long tradition of operating a strong, diverse physics program depends not only on collider physics but also on effective use of the facilities the Laboratory was founded on, the fixed-target beamlines. In this talk the author presents highlights of the Fermilab fixed-target program from its (not too distant) past, (soon to be) present, and (hopefully, not too distant) future program. The author concentrates on those experiments which are unique to the fixed-target program, in particular hadron structure measurements which use the varied beams and targets available in this mode and the physics results from kaon, hyperon and high statistics charm experiments which are not easily accessible in high p{sub T} hadron collider detectors.

Vertical orbit excursion fixed field alternating gradient accelerators

Directory of Open Access Journals (Sweden)

Stephen Brooks

2013-08-01

Full Text Available Fixed field alternating gradient (FFAG accelerators with vertical orbit excursion (VFFAGs provide a promising alternative design for rings with fixed-field superconducting magnets. They have a vertical magnetic field component that increases with height in the vertical aperture, yielding a skew quadrupole focusing structure. Scaling-type VFFAGs are found with fixed tunes and no intrinsic limitation on momentum range. This paper presents the first multiparticle tracking of such machines. Proton driver rings to accelerate the 800 MeV beam from the ISIS synchrotron are presented, in terms of both magnet field geometry and longitudinal behavior during acceleration with space charge. The 12 GeV ring produces an output power of at least 2.18 MW. Possible applications of VFFAGs to waste transmutation, hadron therapy, and energy-recovery electron accelerators are also discussed.

Asteroid body-fixed hovering using nonideal solar sails

International Nuclear Information System (INIS)

Zeng, Xiang-Yuan; Jiang, Fang-Hua; Li, Jun-Feng

2015-01-01

The problem of body-fixed hovering over an asteroid using a compact form of nonideal solar sails with a controllable area is investigated. Nonlinear dynamic equations describing the hovering problem are constructed for a spherically symmetric asteroid. Numerical solutions of the feasible region for body-fixed hovering are obtained. Different sail models, including the cases of ideal, optical, parametric and solar photon thrust, on the feasible region is studied through numerical simulations. The influence of the asteroid spinning rate and the sail area-to-mass ratio on the feasible region is discussed. The required orientations for the sail and their corresponding variable lightness numbers are given for different hovering radii to identify the feasible region of the body-fixed hovering. An attractive scenario for a mission is introduced to take advantage of solar sail hovering. (paper)

Novel Metabolic Attributes of the Genus Cyanothece, Comprising a Group of Unicellular Nitrogen-Fixing Cyanobacteria

Science.gov (United States)

Bandyopadhyay, Anindita; Elvitigala, Thanura; Welsh, Eric; Stöckel, Jana; Liberton, Michelle; Min, Hongtao; Sherman, Louis A.; Pakrasi, Himadri B.

2011-01-01

ABSTRACT The genus Cyanothece comprises unicellular cyanobacteria that are morphologically diverse and ecologically versatile. Studies over the last decade have established members of this genus to be important components of the marine ecosystem, contributing significantly to the nitrogen and carbon cycle. System-level studies of Cyanothece sp. ATCC 51142, a prototypic member of this group, revealed many interesting metabolic attributes. To identify the metabolic traits that define this class of cyanobacteria, five additional Cyanothece strains were sequenced to completion. The presence of a large, contiguous nitrogenase gene cluster and the ability to carry out aerobic nitrogen fixation distinguish Cyanothece as a genus of unicellular, aerobic nitrogen-fixing cyanobacteria. Cyanothece cells can create an anoxic intracellular environment at night, allowing oxygen-sensitive processes to take place in these oxygenic organisms. Large carbohydrate reserves accumulate in the cells during the day, ensuring sufficient energy for the processes that require the anoxic phase of the cells. Our study indicates that this genus maintains a plastic genome, incorporating new metabolic capabilities while simultaneously retaining archaic metabolic traits, a unique combination which provides the flexibility to adapt to various ecological and environmental conditions. Rearrangement of the nitrogenase cluster in Cyanothece sp. strain 7425 and the concomitant loss of its aerobic nitrogen-fixing ability suggest that a similar mechanism might have been at play in cyanobacterial strains that eventually lost their nitrogen-fixing ability. PMID:21972240

Computer Aided Synthesis of a Four-Bar Mechanism For Soil Tilling ...

African Journals Online (AJOL)

points, circle points, lengths, and the coupler point of interest of the chosen mechanism were altered and the resulting coupler curve plotted. The process was repeated until a suitable coupler curve and acceptable dimensions and fixed points locations were obtained. Keywords: Computer synthesis, four-bar mechanism, ...

Voltage sag influence on fatigue life of the drivetrain of fixed speed wind turbines

DEFF Research Database (Denmark)

Veluri, Badrinath; Santos-Martin, David; Jensen, Henrik Myhre

2011-01-01

Occurrence of voltage sags due to electrical grid faults and other network disturbances generate transients of the generator electromagnetic torque which result in significant high stresses and noticeable vibrations for the wind turbine mechanical system and may also have a detrimental effect...... on the fatigue life of important drivetrain components. The high penetration of wind energy in the electrical grids demands new requirements for the operation of wind energy conversion systems. Although fixed speed wind turbine technology is nowadays replaced by variable speed wind turbines. In some countries...... by the stator flux oscillations which cause high transients of the generator electromagnetic torque. This paper focuses in estimating the resulting significant stresses transients due to the electromagnetic torque transients, which transmits to the wind turbine mechanical system that may have a detrimental...

48 CFR 916.306 - Cost-plus-fixed-fee contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Cost-plus-fixed-fee... METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Cost-Reimbursement Contracts 916.306 Cost-plus-fixed-fee... application of the statutory price or fee limitations. [49 FR 11955, Mar. 28, 1984, as amended at 59 FR 9105...

Lectures on Antitrust Economics, Chapter 2: Price Fixing

OpenAIRE

Whinston, Michael D.

2003-01-01

In this chapter, we begin our discussion of antitrust economics by considering what many consider its most central element: its ban on "price fixing" - that is, agreements among competitors over the prices they will charge or the outputs they will produce. Indeed, the prohibition on price fixing is one area of antitrust law that even those generally skeptical of governmental compe- tition policy typically regard approvingly. Nevertheless, despite its current uncontroversial status, we shall s...

Fixed-premium deposit insurance and international credit crunches

OpenAIRE

Mark M. Spiegel

1996-01-01

This article introduces a monopolistically competitive model of foreign lending in which both explicit and implicit fixed-premium deposit insurance increase the degree to which bank participation in relending to problem debtors falls below its globally optimal level. This provides a channel for fixed-premium deposit insurance to inhibit credit extension in bad states, resulting in an increase in the expected default percentage and an increase in the expected burden on the deposit insurance in...

FIX-II/3025, BWR FIX-II Pump Trip Experiment 3025, Immediate Split Size Break

International Nuclear Information System (INIS)

NILSSON, Lars; GUSTAFSSON, Per-Ake; GUSTAFSON, Lennart; JANCZAK, Rajmund; OESTERLUNDH, Ingrid

1992-01-01

1 - Description of test facility: The FIX-II facility is a volume scaled 1:777 representation of a Swedish BWR with external pumps. The pressure vessel contains a 36 rod full length bundle and a spray condenser at the top to allow steady state operation. The downcomer, bypass channels and guide tube volumes are represented by external piping. The intact loop represents three of the four external reactor loops. The broken loop is constructed such that both guillotine breaks and split breaks may be simulated. The facility is equipped with ADS-simulation, but no ECCS injection are included. The FIX-II loop is also suited to investigate response of pump trips and MSIV closures in internal pump reactors. 2 - Description of test: Test 3025 simulates an intermediate size split break in one of the four main recirculation lines. The break area was 31 per cent of the scaled down pipe area of the reactor. The initial power of the 36-rod bundle was 3.38 MW, corresponding to the hot channel power of the reactor

Fixed points and self-reference

Directory of Open Access Journals (Sweden)

Raymond M. Smullyan

1984-01-01

Full Text Available It is shown how Gödel's famous diagonal argument and a generalization of the recursion theorem are derivable from a common construation. The abstract fixed point theorem of this article is independent of both metamathematics and recursion theory and is perfectly comprehensible to the non-specialist.

Limb amputations in fixed dystonia: A form of body integrity identity disorder?

NARCIS (Netherlands)

Edwards, M.J.; Alonso-Canovas, A.; Schrag, A.; Bloem, B.R.; Thompson, P.D.; Bhatia, K.

2011-01-01

Fixed dystonia is a disabling disorder mainly affecting young women who develop fixed abnormal limb postures and pain after apparently minor peripheral injury. There is continued debate regarding its pathophysiology and management. We report 5 cases of fixed dystonia in patients who sought

Effect of Hydrochloric Acid, Mechanical Scarification, Wet Heat ...

African Journals Online (AJOL)

Michael Horsfall

mechanical scarification and 50% hydrochloric acid were found to induce germination of the ... are mixed with Moringa oloifera leaves to prepare a source and are also ... ability to fix atmospheric nitrogen in soil and the seeds are reported to ...

Airborne and Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS)

Science.gov (United States)

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-421 Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) As of FY 2017...Information Program Name Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) DoD Component Army Responsible Office References SAR...UNCLASSIFIED 5 Mission and Description Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) products are software programmable

Topological Vector Space-Valued Cone Metric Spaces and Fixed Point Theorems

Directory of Open Access Journals (Sweden)

Radenović Stojan

2010-01-01

Full Text Available We develop the theory of topological vector space valued cone metric spaces with nonnormal cones. We prove three general fixed point results in these spaces and deduce as corollaries several extensions of theorems about fixed points and common fixed points, known from the theory of (normed-valued cone metric spaces. Examples are given to distinguish our results from the known ones.

Asset Prices and Trading Volume under Fixed Transactions Costs.

Science.gov (United States)

Lo, Andrew W.; Mamaysky, Harry; Wang, Jiang

2004-01-01

We propose a dynamic equilibrium model of asset prices and trading volume when agents face fixed transactions costs. We show that even small fixed costs can give rise to large "no-trade" regions for each agent's optimal trading policy. The inability to trade more frequently reduces the agents' asset demand and in equilibrium gives rise to a…

[Resin-bonded fixed partial dentures

NARCIS (Netherlands)

Kreulen, C.M.; Creugers, N.H.J.

2013-01-01

A resin-bonded fixed partial denture is a prosthetic construction which can replace I or several teeth in an occlusal system and which comprises a pontic element which is adhesively attached to 1 or more abutment teeth. To compensate for the limited shear strength of the adhesive layer, the Jixed

Fixed Point Learning Based Intelligent Traffic Control System

Science.gov (United States)

Zongyao, Wang; Cong, Sui; Cheng, Shao

2017-10-01

Fixed point learning has become an important tool to analyse large scale distributed system such as urban traffic network. This paper presents a fixed point learning based intelligence traffic network control system. The system applies convergence property of fixed point theorem to optimize the traffic flow density. The intelligence traffic control system achieves maximum road resources usage by averaging traffic flow density among the traffic network. The intelligence traffic network control system is built based on decentralized structure and intelligence cooperation. No central control is needed to manage the system. The proposed system is simple, effective and feasible for practical use. The performance of the system is tested via theoretical proof and simulations. The results demonstrate that the system can effectively solve the traffic congestion problem and increase the vehicles average speed. It also proves that the system is flexible, reliable and feasible for practical use.

Gauge fixing and classical dynamical r-matrices in (2+1)-gravity

International Nuclear Information System (INIS)

Schoenfeld, Torsten

2012-01-01

We apply the Dirac gauge fixing procedure to the combinatorial description of the moduli space of flat ISO(2,1)-connections. This is motivated by two goals: one originates from physics while the other is of a mathematical nature. The first goal is to investigate the application of gauge fixing in Lorentzian (2+1)-gravity with vanishing cosmological constant, whose phase space is closely related to the moduli space of flat ISO(2,1)-connections. To this end, we first show that specifying gauge fixing conditions amounts to introducing an observer into the theory. Then we determine explicit expressions for the Dirac brackets of specific sets of gauge fixing conditions and give a physical interpretation of the results in terms of the geometry of spacetimes and their effective symmetries. To investigate the mathematical structures underlying the Dirac gauge fixing procedure we then consider general gauge fixing conditions. We first show that the resulting Dirac brackets are in one-to-one correspondence with solutions of the classical dynamical Yang-Baxter equation. We then analyze the relation between the Dirac brackets associated with two different sets of gauge fixing conditions. We find that this relation is given by the action of certain dynamical Poincare transformations which generalize the gauge transformations of classical dynamical r-matrices. Using these transformations, we give a classification of all resulting Dirac brackets and the associated solutions of the classical dynamical Yang-Baxter equation.

Gauge fixing and classical dynamical r-matrices in (2+1)-gravity

Energy Technology Data Exchange (ETDEWEB)

Schoenfeld, Torsten

2012-11-20

We apply the Dirac gauge fixing procedure to the combinatorial description of the moduli space of flat ISO(2,1)-connections. This is motivated by two goals: one originates from physics while the other is of a mathematical nature. The first goal is to investigate the application of gauge fixing in Lorentzian (2+1)-gravity with vanishing cosmological constant, whose phase space is closely related to the moduli space of flat ISO(2,1)-connections. To this end, we first show that specifying gauge fixing conditions amounts to introducing an observer into the theory. Then we determine explicit expressions for the Dirac brackets of specific sets of gauge fixing conditions and give a physical interpretation of the results in terms of the geometry of spacetimes and their effective symmetries. To investigate the mathematical structures underlying the Dirac gauge fixing procedure we then consider general gauge fixing conditions. We first show that the resulting Dirac brackets are in one-to-one correspondence with solutions of the classical dynamical Yang-Baxter equation. We then analyze the relation between the Dirac brackets associated with two different sets of gauge fixing conditions. We find that this relation is given by the action of certain dynamical Poincare transformations which generalize the gauge transformations of classical dynamical r-matrices. Using these transformations, we give a classification of all resulting Dirac brackets and the associated solutions of the classical dynamical Yang-Baxter equation.

Establishing the maxillary occlusal plane as a requisite for placement of an immediate implant-supported fixed prosthesis in the mandible: a case report

Directory of Open Access Journals (Sweden)

Milton Edson Miranda

Full Text Available INTRODUCTION: In patients with Bruxism, the attrition can result in excessive occlusal wear that exceeds the compensatory mechanism and loss of occlusion vertical dimension occurs. OBJECTIVE: The purpose of this article is to show the importance of re-establishing an adequate occlusal plane for the non treated arch by means of a fixed acrylic overlay, compatible with the prosthetic treatment of the arch to be rehabilitated. An upper maxillary fixed acrylic overlay restored the patient’s occlusal plane in an appropriate vertical dimension of occlusion together with a fixed prosthesis in the mandible, supported by five dental implants. CONCLUSION: When there is severe wear due to dental attrition in one of the arches, it is important to re-establish the occlusal plane and compensation curves in conjunction with the prosthetic treatment of the arch to be rehabilitated.

Design and Implementation of Numerical Linear Algebra Algorithms on Fixed Point DSPs

Directory of Open Access Journals (Sweden)

Gene Frantz

2007-01-01

Full Text Available Numerical linear algebra algorithms use the inherent elegance of matrix formulations and are usually implemented using C/C++ floating point representation. The system implementation is faced with practical constraints because these algorithms usually need to run in real time on fixed point digital signal processors (DSPs to reduce total hardware costs. Converting the simulation model to fixed point arithmetic and then porting it to a target DSP device is a difficult and time-consuming process. In this paper, we analyze the conversion process. We transformed selected linear algebra algorithms from floating point to fixed point arithmetic, and compared real-time requirements and performance between the fixed point DSP and floating point DSP algorithm implementations. We also introduce an advanced code optimization and an implementation by DSP-specific, fixed point C code generation. By using the techniques described in the paper, speed can be increased by a factor of up to 10 compared to floating point emulation on fixed point hardware.

OCT and shear-force evaluations of zirconia Fixed Partial Prosthesis processed with a conventional CAD/CAM technology

Science.gov (United States)

Zaharia, C.; Gabor, A.; Sinescu, C.; Topala, F. I.; Negrutiu, M. L.; Levai, C. M.; Duma, V. F.; Bradu, A.; Podoleanu, A. Gh.

2016-03-01

Introduction. Dental ceramics show better biocompatibility and aesthetic properties in dental constructs with regard to metals. However, they also have an insufficient mechanical stability, as well as low resistance limits due to their fragility. Taking into account these aspects, glass infiltrated with ceramic materials such as alumina (i.e., zirconiareinforced ceramics) is being nowadays considered a better material for full fixed partial prostheses (FPPs) than ceramics: the former has a higher mechanical resistance, which makes it more appropriate for restoration areas, where there is an increased mechanical stress. The interest for zirconia is growing due both to its resistance and to the possibility to develop such prostheses using the CAD/CAM technology. Materials and methods. 24 all ceramic FPPs created with CAD/CAM technology were used. The models were scanned with Zeno Wieland Scanner, a one touch scanning machine which requires between 45-60 s for a full model scan. The scanner provides 3 axis-architecture and automatic data processing. The zirconia infrastructures resulted from milling zirconia green disks in Wieland units, followed by the deposition of ceramic masses and then by burning procedures. All the samples were assessed with a Time Domain Optical Coherence Tomography (TD-OCT) system working at a wavelenght of 1300 nm. Using OCT investigations, material defects were detected in the areas of maximal tension, i.e. the connectors, the oclusal, and the cervical areas. These samples with defects in the above areas have not been considered for the study further on. Finally, the samples were loaded in a MultiTest 5 i Mecmesin system and tested until fracture occurred. The MultiTest 5-i creates tensile and compression forces of up to 5 kN. Results and discussions. All the test samples survived a dynamic load of 1.2 x 107 cycles and a thermal cycle mixer simulator version; signs of failure in terms of fracture lines were observed in all samples. The

48 CFR 616.207 - Firm-fixed-price, level-of-effort term contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Firm-fixed-price, level-of-effort term contracts. 616.207 Section 616.207 Federal Acquisition Regulations System DEPARTMENT OF STATE CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 616.207 Firm-fixed-price...

48 CFR 16.207 - Firm-fixed-price, level-of-effort term contracts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Firm-fixed-price, level-of-effort term contracts. 16.207 Section 16.207 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 16.207 Firm-fixed...

Video change detection for fixed wing UAVs

Science.gov (United States)

Bartelsen, Jan; Müller, Thomas; Ring, Jochen; Mück, Klaus; Brüstle, Stefan; Erdnüß, Bastian; Lutz, Bastian; Herbst, Theresa

2017-10-01

In this paper we proceed the work of Bartelsen et al.1 We present the draft of a process chain for an image based change detection which is designed for videos acquired by fixed wing unmanned aerial vehicles (UAVs). From our point of view, automatic video change detection for aerial images can be useful to recognize functional activities which are typically caused by the deployment of improvised explosive devices (IEDs), e.g. excavations, skid marks, footprints, left-behind tooling equipment, and marker stones. Furthermore, in case of natural disasters, like flooding, imminent danger can be recognized quickly. Due to the necessary flight range, we concentrate on fixed wing UAVs. Automatic change detection can be reduced to a comparatively simple photogrammetric problem when the perspective change between the "before" and "after" image sets is kept as small as possible. Therefore, the aerial image acquisition demands a mission planning with a clear purpose including flight path and sensor configuration. While the latter can be enabled simply by a fixed and meaningful adjustment of the camera, ensuring a small perspective change for "before" and "after" videos acquired by fixed wing UAVs is a challenging problem. Concerning this matter, we have performed tests with an advanced commercial off the shelf (COTS) system which comprises a differential GPS and autopilot system estimating the repetition accuracy of its trajectory. Although several similar approaches have been presented,23 as far as we are able to judge, the limits for this important issue are not estimated so far. Furthermore, we design a process chain to enable the practical utilization of video change detection. It consists of a front-end of a database to handle large amounts of video data, an image processing and change detection implementation, and the visualization of the results. We apply our process chain on the real video data acquired by the advanced COTS fixed wing UAV and synthetic data. For the

A novel pungency biosensor prepared with fixing taste-bud tissue of rats.

Science.gov (United States)

Qiao, Lixin; Jiao, Lihua; Pang, Guangchang; Xie, Junbo

2015-06-15

A novel taste biosensor based on ligand-receptor interaction was developed through fixing taste-bud tissues of SD rats to a glassy carbon electrode. Using the sodium alginate-starch gel as a fixing agent, taste-bud tissues of SD rats were fixed between two nuclear microporous membranes to make a sandwich-type sensing membrane. With the taste biosensor, the response current induced by capsaicin and gingerol stimulating the corresponding receptors was measured. The results showed that the lowest limit of detection of this biosensor to capsaicin was 1×10(-13) mol/L and the change rate of response current was the highest at the concentration of 9×10(-13) mol/L, indicating that the capsaicin receptor was saturated at this point. The lowest limit of detection of this biosensor to gingerol was 1×10(-12) mol/L, and the gingerol receptor was saturated when the concentration of gingerol was 3×10(-11) mol/L. It was demonstrated that the interaction curves of capsaicin and gingerol with their respective receptors exhibited high correlation (R(2): 0.9841 and 0.9904). The binding constant and dissociation constant of gingerol with its receptor were 1.564×10(-11) and 1.815×10(-11) respectively, which were all higher than those of capsaicin with its receptor (1.249×10(-12) and 2.078×10(-12)). This study, for the first time, made it possible to quantitatively determine the interaction of the taste receptor and pungent substances with a new biosensor, thus providing a simple approach for monitoring pungent substances and investigating the mechanism of ligand-receptor interaction. Copyright © 2015 Elsevier B.V. All rights reserved.

What Does It Take to Evolve A Nitrogen-Fixing Endosymbiosis?

NARCIS (Netherlands)

Geurts, Rene; Xiao, Ting Ting; Reinhold-Hurek, Barbara

2016-01-01

Plant rhizo- and phyllospheres are exposed to a plethora of nitrogen-fixing bacteria, providing opportunities for the establishment of symbiotic associations. Nitrogen-fixing endosymbioses are most profitable and have evolved more than ten times in the angiosperms. This suggests that the

Detection of Chlamydia in postmortal formalin-fixed tissue

DEFF Research Database (Denmark)

Lundemose, AG; Lundemose, JB; Birkelund, Svend

1989-01-01

A procedure to detect Chlamydia in postmortal formalin-fixed tissue is described. Monoclonal antibodies against a genus specific chlamydia epitope were used in immunofluorescence to detect chlamydia inclusions in formalin-fixed tissue sections. Lung sections from chlamydia-infected mice were....... Background and non-specific fluorescence were reduced by treating the tissue sections with trypsin, rabbit serum and Evans blue counterstain. Besides giving an exact diagnosis at autopsy, the method provides the possibility of determining the occurrence of chlamydia infections in various tissues, based...

Scanning conductance microscopy investigations on fixed human chromosomes

DEFF Research Database (Denmark)

Clausen, Casper Hyttel; Lange, Jacob Moresco; Jensen, Linda Boye

2008-01-01

Scanning conductance microscopy investigations were carried out in air on human chromosomes fixed on pre-fabricated SiO2 surfaces with a backgate. The point of the investigation was to estimate the dielectric constant of fixed human chromosomes in order to use it for microfluidic device...... optimization. The phase shift caused by the electrostatic forces, together with geometrical measurements of the atomic force microscopy (AFM) cantilever and the chromosomes were used to estimate a value,for the dielectric constant of different human chromosomes....

Beauty and charm production in fixed target experiments

International Nuclear Information System (INIS)

Kidonakis, Nikolaos; Vogt, Ramona

2004-01-01

We present calculations of NNLO threshold corrections for beauty and charm production in π - p and pp interactions at fixed-target experiments. Recent calculations for heavy quark hadroproduction have included next-to-next-to-leading-order (NNLO) soft-gluon corrections [1] to the double differential cross section from threshold resummation techniques [2]. These corrections are important for near-threshold beauty and charm production at fixed-target experiments, including HERA-B and some of the current and future heavy ion experiments

Coupling device of the control rod and of the drive mechanism

International Nuclear Information System (INIS)

Savary, F.

1986-01-01

The invention proposes a coupling device removable in which the connection between the upper head of the control rod and the drive mechanism is a real rigid fixing, in the mechanical sense of the term, suppressing longitudinal play and allowing to restrict the momenta occurring when locating the control rods [fr

Duan's fixed point theorem: Proof and generalization

Directory of Open Access Journals (Sweden)

Arkowitz Martin

2006-01-01

Full Text Available Let be an H-space of the homotopy type of a connected, finite CW-complex, any map and the th power map. Duan proved that has a fixed point if . We give a new, short and elementary proof of this. We then use rational homotopy to generalize to spaces whose rational cohomology is the tensor product of an exterior algebra on odd dimensional generators with the tensor product of truncated polynomial algebras on even dimensional generators. The role of the power map is played by a -structure as defined by Hemmi-Morisugi-Ooshima. The conclusion is that and each has a fixed point.

Fluorine-fixing efficiency on calcium-based briquette: pilot experiment, demonstration and promotion.

Science.gov (United States)

Yang, Jiao-lan; Chen, Dong-qing; Li, Shu-min; Yue, Yin-ling; Jin, Xin; Zhao, Bing-cheng; Ying, Bo

2010-02-05

The fluorosis derived from coal burning is a very serious problem in China. By using fluorine-fixing technology during coal burning we are able to reduce the release of fluorides in coal at the source in order to reduce pollution to the surrounding environment by coal burning pollutants as well as decrease the intake and accumulating amounts of fluorine in the human body. The aim of this study was to conduct a pilot experiment on calcium-based fluorine-fixing material efficiency during coal burning to demonstrate and promote the technology based on laboratory research. A proper amount of calcium-based fluorine sorbent was added into high-fluorine coal to form briquettes so that the fluorine in high-fluorine coal can be fixed in coal slag and its release into atmosphere reduced. We determined figures on various components in briquettes and fluorine in coal slag as well as the concentrations of indoor air pollutants, including fluoride, sulfur dioxide and respirable particulate matter (RPM), and evaluated the fluorine-fixing efficiency of calcium-based fluorine sorbents and the levels of indoor air pollutants. Pilot experiments on fluorine-fixing efficiency during coal burning as well as its demonstration and promotion were carried out separately in Guiding and Longli Counties of Guizhou Province, two areas with coal burning fluorosis problems. If the calcium-based fluorine sorbent mixed coal was made into honeycomb briquettes the average fluorine-fixing ratio in the pilot experiment was 71.8%. If the burning calcium-based fluorine-fixing bitumite was made into a coalball, the average of fluorine-fixing ratio was 77.3%. The concentration of fluoride, sulfur dioxide and PM10 of indoor air were decreased significantly. There was a 10% increase in the cost of briquettes due to the addition of calcium-based fluorine sorbent. The preparation process of calcium-based fluorine-fixing briquette is simple yet highly flammable and it is applicable to regions with abundant

Chemical-looping combustion in a reverse-flow fixed bed reactor

International Nuclear Information System (INIS)

Han, Lu; Bollas, George M.

2016-01-01

A reverse-flow fixed bed reactor concept for CLC (chemical-looping combustion) is explored. The limitations of conventional fixed bed reactors, as applied to CLC, are overcome by reversing the gas flow direction periodically to enhance the mixing characteristics of the bed, thus improving oxygen carrier utilization and energy efficiency with respect to power generation. The reverse-flow reactor is simulated by a dusty-gas model and compared with an equivalent fixed bed reactor without flow reversal. Dynamic optimization is used to calculate conditions at which each reactor operates at maximum energy efficiency. Several cases studies illustrate the benefits of reverse-flow operation for the CLC with CuO and NiO oxygen carriers and methane and syngas fuels. The results show that periodic reversal of the flow during reduction improves the contact between the fuel and unconverted oxygen carrier, enabling the system to suppress unwanted catalytic reactions and axial temperature and conversion gradients. The operational scheme presented reduces the fluctuations of temperature during oxidation and increases the high-temperature heat produced by the process. CLC in a reverse-flow reactor has the potential to achieve higher energy efficiency than conventional fixed bed CLC reactors, when integrated with a downstream gas turbine of a combined cycle power plant. - Highlights: • Reverse-flow fixed bed CLC reactors for combined cycle power systems. • Dynamic optimization tunes operation of batch and transient CLC systems. • The reverse-flow CLC system provides stable turbine-ready gas stream. • Reverse-flow CLC fixed bed reactor has superior CO 2 capture and thermal efficiency.

The comparison of 0.05% sodium fluoride and 0.2% chlorhexidine usage and aquadest to the plaque index on fixed orthodontic patients

Directory of Open Access Journals (Sweden)

Veronica Vera D. Wiraja

2007-03-01

Full Text Available The fixed orthodontic appliance will cause changes in microbial flora the oral cavity and food debris accumulation and will be formed especially around the gingival sulcus. Plaque control using chemical means can be done by using mouth rinse. This research compared the influence of 0.05% sodium fluoride mouth rinse with aquadest and 0.2% chlorhexidine to the plaque index in fixed orthodontic patients. A double-blind and cross over clinical assessment were applied using a sample size of 16 male fixed orthodontic patients with the age above 21 years. 0.05% sodium fluoride, 0.2% chlorhexidine mouth rinse was given to all patients as a positive control and aquadest as a negative control. Plaque index was then measured after 24 hours without tooth brushing, after using the mouth rinse and a week after using the mouth rinse with tooth brushing. The results showed that the use of 0.05% sodium fluoride mouth rinse reduced plaque index more significantly compared to 0.2% chlorhexidine. The mechanical plaque control by tooth brushing is still the most influential mean to reduce plaque index in fixed orthodontic patients. Mouth rinse is just an additional mean to reduce plaque.

Criteria for seismic evaluation and potential design fixes for WWER type nuclear power plants

International Nuclear Information System (INIS)

Stevenson, J.D.

1995-01-01

The purpose for this document is to provide a criteria for the seismic evaluation and development of potential design fixes for structures, systems and components for the WWER type Nuclear power plants. The design fixes are divided into two categories, detailed and easy fixes. Detailed fixes are typically applicable to building structures, components for which there is little or no seismic capacity information, large tanks and vital systems and components which make up the reactor cooling system and components which perform support or auxiliary functions. In case of the design of 'easy fixes', the criteria presented may be used for both the seismic design as well as for the evaluation of structures, systems and components to which easy fix design applies. Easy fixes are situations where seismic capacities of structures, systems and components can be significantly increased with relatively minor, inexpensive fixes usually associated with anchorage modification of safety related structures, systems and components or those that could interact with safety related structures, systems and components. Often these fixes can be accomplished while the plant is in operation

Criteria for seismic evaluation and potential design fixes for WWER type nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Stevenson, J D [Stevenson and Associates, Cleveland, OH (United States)

1995-07-01

The purpose for this document is to provide a criteria for the seismic evaluation and development of potential design fixes for structures, systems and components for the WWER type Nuclear power plants. The design fixes are divided into two categories, detailed and easy fixes. Detailed fixes are typically applicable to building structures, componentsfor which there is little or no seismic capacity information, large tanks and vital systems and components which make up the reactor cooling system and components which perform support or auxiliary functions. In case of the design of 'easy fixes', the criteria presented may be used for both the seismic design as well as for the evaluation of structures, systems and components to which easy fix design applies. Easy fixes are situations where seismic capacities of structures, systems and components can be significantly increased with relatively minor, inexpensive fixes usually associated with anchorage modification of safety related structures, systems and components or those that could interact with safety related structures, systems and components. Often these fixes can be accomplished while the plant is in operation.

Tracing the evolutionary path to nitrogen-fixing crops.

Science.gov (United States)

Delaux, Pierre-Marc; Radhakrishnan, Guru; Oldroyd, Giles

2015-08-01

Nitrogen-fixing symbioses between plants and bacteria are restricted to a few plant lineages. The plant partner benefits from these associations by gaining access to the pool of atmospheric nitrogen. By contrast, other plant species, including all cereals, rely only on the scarce nitrogen present in the soil and what they can glean from associative bacteria. Global cereal yields from conventional agriculture are dependent on the application of massive levels of chemical fertilisers. Engineering nitrogen-fixing symbioses into cereal crops could in part mitigate the economic and ecological impacts caused by the overuse of fertilisers and provide better global parity in crop yields. Comparative phylogenetics and phylogenomics are powerful tools to identify genetic and genomic innovations behind key plant traits. In this review we highlight recent discoveries made using such approaches and we discuss how these approaches could be used to help direct the engineering of nitrogen-fixing symbioses into cereals. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

PLOT REELED INTO AN EKPHRASIS IN BELLES LETTRES OF THE BEGINNING OF THE 20TH CENTURY

Directory of Open Access Journals (Sweden)

Elena Vasil’evna Astaschenko

2015-11-01

Full Text Available Plots reeled into the ekphrasis have always existed. In belles lettres of the beginning of the 20th century, the fight between the pagan and the Christian manifests in the opposition of scenic space and it creates a powerful «magnetic» field. This is a special type of mythologism in which the Christian imagery is on the positive side of the binary opposition with its respective system of ethical coordinates. In «polytheistic systems, the presentations of evil is static as of the essential and eternal beginning of the world», but in the orthodox Christianity, the devil is a ghost, lure, disembodied temptation and «with every day it approaches nonexistence» (from the «Moralia» of the 6th century by Gregory the Great. However, Gregory the Great also notes that the power of Satan is from God as all other powers, he just distorted his power with his God-given free will. Even at the level of worldly wisdom aphorisms there is a conventional belief that our shortcomings are the continuation of our merits, and therefore it is necessary to adhere to the golden mean. Accroding to A. Gracheva in the book «Dialogues of Janus: Belles lettres and classics in the Russian literature of the early twentieth century», at the beginning of the 19th century, the mythologism of the spontaneous and not experimental type (often encyclopaedic and «algebraic» like in the works of Joyce and Bely, is especially pronounced in the works of writers, who are close to mass literature with their democracy or «boudoir» and especially in the works of female writers. This is due both to existing archetypes of the collective unconscious (some of which are even atavistic and «migratory plots» which are characteristic of both folklore and popular culture. Despite the compelling erotic subject matter, belles lettres is not always frivolous and, on the contrary, it is edifying and full of moral questions, which are sometimes rhetorical: «What is a sin and what does the

Stitching-aware in-design DPT auto fixing for sub-20nm logic devices

Science.gov (United States)

Choi, Soo-Han; Sai Krishna, K. V. V. S.; Pemberton-Smith, David

2017-03-01

As the technology continues to shrink below 20nm, Double Patterning Technology (DPT) becomes one of the mandatory solutions for routing metal layers. From the view point of Place and Route (P&R), the major concerns are how to prevent DPT odd-cycles automatically without sacrificing chip area. Even though the leading-edge P&R tools have advanced algorithms to prevent DPT odd-cycles, it is very hard to prevent the localized DPT odd-cycles, especially in Engineering Change Order (ECO) routing. In the last several years, we developed In-design DPT Auto Fixing method in order to reduce localized DPT odd-cycles significantly during ECO and could achieve remarkable design Turn-Around Times (TATs). But subsequently, as the design complexity continued increasing and chip size continued decreasing, we needed a new In-design DPT Auto Fixing approach to improve the auto. fixing rate. In this paper, we present the Stitching-Aware In-design DPT Auto Fixing method for better fixing rates and smaller chip design. The previous In-design DPT Auto Fixing method detected all DPT odd-cycles and tried to remove oddcycles by increasing the adjacent space. As the metal congestions increase in the newer technology nodes, the older Auto Fixing method has limitations to increase the adjacent space between routing metals. Consequently, the auto fixing rate of older method gets worse with the introduction of the smaller design rules. With DPT stitching enablement at In-design DRC checking procedure, the new Stitching-Aware DPT Auto Fixing method detects the most critical odd-cycles and revolve the odd-cycles automatically. The accuracy of new flow ensures better usage of space in the congested areas, and helps design more smaller chips. By applying the Stitching-Aware DPT Auto Fixing method to sub-20nm logic devices, we can confirm that the auto fixing rate is improved by 2X compared with auto fixing without stitching. Additionally, by developing the better heuristic algorithm and flow for DPT

Adhesives for fixed orthodontic brackets.

Science.gov (United States)

Mandall, N A; Millett, D T; Mattick, C R; Hickman, J; Macfarlane, T V; Worthington, H V

2003-01-01

Bonding of orthodontic brackets to teeth is important to enable effective and efficient treatment with fixed appliances. The problem is bracket failure during treatment which increases operator chairside time and lengthens treatment time. A prolonged treatment is likely to increase the oral health risks of orthodontic treatment with fixed appliances one of which is irreversible enamel decalcification. To evaluate the effectiveness of different orthodontic adhesives for bonding. Electronic databases: the Cochrane Oral Health Group's Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE and EMBASE. Date of most recent searches: August 2002 (CENTRAL) (The Cochrane Library Issue 2, 2002). Trials were selected if they met the following criteria: randomised controlled trials (RCTs) and controlled clinical trials (CCTs) comparing two different adhesive groups. Participants were patients with fixed orthodontic appliances. The interventions were adhesives that bonded stainless steel brackets to all teeth except the molars. The primary outcome was debond or bracket failure. Data were recorded on decalcification as a secondary outcome, if present. Information regarding methods, participants, interventions, outcome measures and results were extracted in duplicate by pairs of reviewers (Nicky Mandall (NM) and Rye Mattick (CRM); Declan Millett (DTM) and Joy Hickman (JH2)). Since the data were not presented in a form that was amenable to meta-analysis, the results of the review are presented in narrative form only. Three trials satisfied the inclusion criteria. A chemical cured composite was compared with a light cure composite (one trial), a conventional glass ionomer cement (one trial) and a polyacid-modified resin composite (compomer) (one trial). The quality of the trial reports was generally poor. It is difficult to draw any conclusions from this review, however, suggestions are made for methods of improving future research involving

Choice between variable and fixed cocaine injections in male rhesus monkeys.

Science.gov (United States)

Huskinson, S L; Freeman, K B; Petry, N M; Rowlett, J K

2017-08-01

The schedule of drug availability may enhance choice of a drug. In non-human subjects, reinforcers are chosen more often when available under variable schedules of reinforcement relative to fixed schedules. To determine whether variable-drug access is an important determinant of cocaine choice by manipulating the schedule, drug dose, and combination of schedule + dose. Four male rhesus monkeys chose between cocaine doses (0.025-0.4 mg/kg/injection). In control conditions, the schedule and dose of each drug delivery were fixed. In other conditions, the reinforcement schedule (i.e., variable-ratio schedule), dose of each cocaine delivery, or both were variable on one lever while all aspects on the other lever remained fixed. When cocaine dose was equal on average (0.1 mg/kg/injection), 2 of 4 subjects chose cocaine associated with the variable schedule more than the fixed schedule. All subjects chose the variable dose that was equal on average to the fixed dose, and this difference was statistically significant. Three of 4 subjects chose cocaine associated with the variable combination over the fixed option (when the dose was equal on average). During dose-response determinations (when dose on the variable and fixed options were not equal), making the schedule, dose, or both variable generally did not alter cocaine's potency as a reinforcer. While many factors contribute to drug choice, unpredictable drug access is a feature that may be common in the natural environment and could play a key role in the allocation of behavior to drug alternatives by patients with substance-use disorders.

Stochastic quantization and gauge-fixing of the linearized gravitational field

International Nuclear Information System (INIS)

Hueffel, H.; Rumpf, H.

1984-01-01

Due to the indefiniteness of the Euclidean gravitational action the Parisi-Wu stochastic quantization scheme fails in the case of the gravitational field. Therefore we apply a recently proposed modification of stochastic quantization that works in Minkowski space and preserves all the advantages of the original Parisi-Wu method; in particular no gauge-fixing is required. Additionally stochastic gauge-fixing may be introduced and is also studied in detail. The graviton propagators obtained with and without stochastic gauge-fixing all exhibit a noncausal contribution, but apart from this effect the gauge-invariant quantities are the same as those of standard quantization. (Author)

Renormalization group fixed points of foliated gravity-matter systems

Energy Technology Data Exchange (ETDEWEB)

Biemans, Jorn [Institute for Mathematics, Astrophysics and Particle Physics (IMAPP),Radboud University Nijmegen,Heyendaalseweg 135, 6525 AJ Nijmegen (Netherlands); Platania, Alessia [Institute for Mathematics, Astrophysics and Particle Physics (IMAPP),Radboud University Nijmegen,Heyendaalseweg 135, 6525 AJ Nijmegen (Netherlands); Department of Physics and Astronomy, University of Catania,Via S. Sofia 63, 95123 Catania (Italy); INFN, Catania section,Via S. Sofia 64, 95123, Catania (Italy); INAF, Catania Astrophysical Observatory,Via S. Sofia 78, 95123, Catania (Italy); Saueressig, Frank [Institute for Mathematics, Astrophysics and Particle Physics (IMAPP),Radboud University Nijmegen,Heyendaalseweg 135, 6525 AJ Nijmegen (Netherlands)

2017-05-17

We employ the Arnowitt-Deser-Misner formalism to study the renormalization group flow of gravity minimally coupled to an arbitrary number of scalar, vector, and Dirac fields. The decomposition of the gravitational degrees of freedom into a lapse function, shift vector, and spatial metric equips spacetime with a preferred (Euclidean) “time”-direction. In this work, we provide a detailed derivation of the renormalization group flow of Newton’s constant and the cosmological constant on a flat Friedmann-Robertson-Walker background. Adding matter fields, it is shown that their contribution to the flow is the same as in the covariant formulation and can be captured by two parameters d{sub g}, d{sub λ}. We classify the resulting fixed point structure as a function of these parameters finding that the existence of non-Gaussian renormalization group fixed points is rather generic. In particular the matter content of the standard model and its most common extensions gives rise to one non-Gaussian fixed point with real critical exponents suitable for Asymptotic Safety. Moreover, we find non-Gaussian fixed points for any number of scalar matter fields, making the scenario attractive for cosmological model building.

Use of fixed income products within a company's portfolio

Directory of Open Access Journals (Sweden)

Vasile DEDU

2012-10-01

Full Text Available Financial instruments have been developed over time from bonds, with a simple structure of cash flows, to yielding instruments that have a complex structure, attracting a much broader range of investors and permitting issuers of bonds to allow reduce the costs of fund raising. To construct investment strategies to control interest rate risk and grow revenues, investors must understand the forcesthat controls the bond market but also the tendencies.The main objective of this paper is to show how they apply to an investment strategy and asset allocation tools available. Fixed income products occupy a large share in total assets, so we want to highlight how to use fixed income products in order to optimize the portfolio of companies. Working hypothesis we chose looks at how the value of financial assets is influenced by macroeconomic factors and market price developments. Investment banks, in particular, put great emphasis on fixed income products and their use by customers. Thus traditional banking and financial products together with fixed income products enables companies to finance current needs, to finance development and to diversify the asset allocation tools.

Investigation of electrodynamic stabilization and control of long orbiting tethers

Science.gov (United States)

Colombo, G.; Arnold, D.

1984-01-01

The state-of-the-art in tether modelling among participants in the Tethered Satellite System (TSS) Program, the slack tether and its behavior, and certain advanced applications of the tether to problems in orbital mechanics are identified. The features and applications of the TSS software set are reviewed. Modelling the slack tether analytically with as many as 50 mass points and the application of this new model to a study of the behavior of a broken tether near the Shuttle are described. A reel control algorithm developed by SAO and examples of its use are described, including an example which also demonstrates the use of the tether in transferring a heavy payload from a low-orbiting Shuttle to a high circular orbit. Capture of a low-orbiting payload by a Space Station in high circular orbit is described. Energy transfer within a dumbbell-type spacecraft by cyclical reeling operations or gravitational effects on the natural elasticity of the connecting tether, it is shown, can circularize the orbit of the spacecraft.

48 CFR 52.249-7 - Termination (Fixed-Price Architect-Engineer).

Science.gov (United States)

2010-10-01

... Architect-Engineer). 52.249-7 Section 52.249-7 Federal Acquisition Regulations System FEDERAL ACQUISITION... Clauses 52.249-7 Termination (Fixed-Price Architect-Engineer). As prescribed in 49.503(b), insert the following clause in solicitations and contracts for architect-engineer services when a fixed-price contract...

Monopole dynamics of yang-mills theory without gauge-fixing

International Nuclear Information System (INIS)

Jia Duojie; Li Xiguo

2003-01-01

A new off-shell decomposition of SU(2) gauge field without any gauge fixing is proposed. This decomposition yields, for an appropriate gauge-fixing, a Skyme-Faddeev-like Wilsonian action and confirms the presence of high-order derivatives of a color-unit-vector at the classical level. The 't Hooft's conjecture that 'monopole' dynamics of infrared Yang-Mills theory is projection independent is also independently demonstrated

Fixed Costs and Hours Constraints

Science.gov (United States)

Johnson, William R.

2011-01-01

Hours constraints are typically identified by worker responses to questions asking whether they would prefer a job with more hours and more pay or fewer hours and less pay. Because jobs with different hours but the same rate of pay may be infeasible when there are fixed costs of employment or mandatory overtime premia, the constraint in those…

Conception and fabrication of a real time automatic correlator (multi-correlator); Etude et realisation d'un correlateur automatique (multicorrelateur) fonctionnant en temps reel

Energy Technology Data Exchange (ETDEWEB)

Berthier, D. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

The purpose of this work is to elaborate a specific computer able to display the real.time correlation function of two variables represented by two electrical signals. The various functions to be done are dealt with the best suited technology: delays from numerical method, hybrid multiplication, analog integration. This method proved very versatile so that it has been possible to modify the circuits with more performing components without changing the general conception of the whole system. In particular, the bandwidth, which was originally 125 kHz (1966) is now 1 MHz and will be 5 MHz, January 1968. Many results are obtained from the correlator such as: - determination of pulse responses of linear systems (1. and 2. order filters, oscillating circuits); - extraction of signals from noise; - measurement of time and space correlation in a turbulent plasma; - treatment of electro-biological signals. (author) [French] Nous nous sommes proposes de concevoir un calculateur specialise pour l'estimation en temps reel de la fonction de correlation de deux phenomenes representes par deux tensions electriques. Il a ete retenu les procedes de calcul s'adaptant le mieux aux diverses fonctions a realiser: retard par une technique numerique, multiplication hybride, integration analogique. Cette methode s'est revelee tres souple d'emploi: en effet les circuits ont pu etre modifies, sans changer la conception de l'appareil, au fur et a mesure de l'evolution des performances des composants electroniques. Ainsi la bande passante de l'appareil qui initialement etait de 125 KHz (1966) est actuellement de 1 MHz et sera 5 MHz en janvier 1968. De nombreux resultats ont ete obtenus avec l'appareil: - determination de reponses impulsionnelles de systemes lineaires (filtres 1er ordre, 2eme ordre, circuit oscillant, etc... ); - detection de signaux dans le bruit; - mesure de correlation spatiale et temporelle dans le plasma - traitement de signaux

Mechanics of collective unfolding

Science.gov (United States)

Caruel, M.; Allain, J.-M.; Truskinovsky, L.

2015-03-01

Mechanically induced unfolding of passive crosslinkers is a fundamental biological phenomenon encountered across the scales from individual macro-molecules to cytoskeletal actin networks. In this paper we study a conceptual model of athermal load-induced unfolding and use a minimalistic setting allowing one to emphasize the role of long-range interactions while maintaining full analytical transparency. Our model can be viewed as a description of a parallel bundle of N bistable units confined between two shared rigid backbones that are loaded through a series spring. We show that the ground states in this model correspond to synchronized, single phase configurations where all individual units are either folded or unfolded. We then study the fine structure of the wiggly energy landscape along the reaction coordinate linking the two coherent states and describing the optimal mechanism of cooperative unfolding. Quite remarkably, our study shows the fundamental difference in the size and the structure of the folding-unfolding energy barriers in the hard (fixed displacements) and soft (fixed forces) loading devices which persists in the continuum limit. We argue that both, the synchronization and the non-equivalence of the mechanical responses in hard and soft devices, have their origin in the dominance of long-range interactions. We then apply our minimal model to skeletal muscles where the power-stroke in acto-myosin crossbridges can be interpreted as passive folding. A quantitative analysis of the muscle model shows that the relative rigidity of myosin backbone provides the long-range interaction mechanism allowing the system to effectively synchronize the power-stroke in individual crossbridges even in the presence of thermal fluctuations. In view of the prototypical nature of the proposed model, our general conclusions pertain to a variety of other biological systems where elastic interactions are mediated by effective backbones.

Products of random matrices from fixed trace and induced Ginibre ensembles

Science.gov (United States)

Akemann, Gernot; Cikovic, Milan

2018-05-01

We investigate the microcanonical version of the complex induced Ginibre ensemble, by introducing a fixed trace constraint for its second moment. Like for the canonical Ginibre ensemble, its complex eigenvalues can be interpreted as a two-dimensional Coulomb gas, which are now subject to a constraint and a modified, collective confining potential. Despite the lack of determinantal structure in this fixed trace ensemble, we compute all its density correlation functions at finite matrix size and compare to a fixed trace ensemble of normal matrices, representing a different Coulomb gas. Our main tool of investigation is the Laplace transform, that maps back the fixed trace to the induced Ginibre ensemble. Products of random matrices have been used to study the Lyapunov and stability exponents for chaotic dynamical systems, where the latter are based on the complex eigenvalues of the product matrix. Because little is known about the universality of the eigenvalue distribution of such product matrices, we then study the product of m induced Ginibre matrices with a fixed trace constraint—which are clearly non-Gaussian—and M  ‑  m such Ginibre matrices without constraint. Using an m-fold inverse Laplace transform, we obtain a concise result for the spectral density of such a mixed product matrix at finite matrix size, for arbitrary fixed m and M. Very recently local and global universality was proven by the authors and their coworker for a more general, single elliptic fixed trace ensemble in the bulk of the spectrum. Here, we argue that the spectral density of mixed products is in the same universality class as the product of M independent induced Ginibre ensembles.

Positive and negative implications entailed by fixed-term employment contracts

Directory of Open Access Journals (Sweden)

Mihaela-Emilia Marica

2018-03-01

Full Text Available Generally, fixed-term employment contracts are seen as a stepping stone to permanent employment; they have become popular among the flexible forms of work contracts, and are the object of an increasing number of debates and assessments, investigating both the respective legislation and the specific consequences on the parties concluding a fixed-term employment contract. Despite the positive aspects of temporary employment – a positive effect on the rate of employment, and the common perception of such contracts as a preliminary step to permanent employment, as well as the flexibility they bring to the labor market – one cannot ignore the negative implications of fixed-term contracts on the nature of the employment relationship, the system of social protection, the working conditions, the economic security, and the job stability. Based on these considerations, the present paper investigates the advantages and disadvantages of the individual fixed-term employment contract from the standpoints of both employers and employees. Obviously, this approach aims to explore the usefulness and importance of these contract types, as means for balancing the needs of employers and employees on the labor market, and for identifying concrete instances that justify the liberalization of fixed-term employment, despite all the inherent risks entailed by any type of non-standard work: lack of job security; reduced social protection and security for those concluding such a contract.

Fixed or adapted conditioning intensity for repeated conditioned pain modulation.

Science.gov (United States)

Hoegh, M; Petersen, K K; Graven-Nielsen, T

2017-12-29

Aims Conditioned pain modulation (CPM) is used to assess descending pain modulation through a test stimulation (TS) and a conditioning stimulation (CS). Due to potential carry-over effects, sequential CPM paradigms might alter the intensity of the CS, which potentially can alter the CPM-effect. This study aimed to investigate the difference between a fixed and adaptive CS intensity on CPM-effect. Methods On the dominant leg of 20 healthy subjects the cuff pressure detection threshold (PDT) was recorded as TS and the pain tolerance threshold (PTT) was assessed on the non-dominant leg for estimating the CS. The difference in PDT before and during CS defined the CPM-effect. The CPM-effect was assessed four times using a CS with intensities of 70% of baseline PTT (fixed) or 70% of PTT measured throughout the session (adaptive). Pain intensity of the conditioning stimulus was assessed on a numeric rating scale (NRS). Data were analyzed with repeated-measures ANOVA. Results No difference was found comparing the four PDTs assessed before CSs for the fixed and the adaptive paradigms. The CS pressure intensity for the adaptive paradigm was increasing during the four repeated assessments (P CPM-effect was higher using the fixed condition compared with the adaptive condition (P CPM paradigms using a fixed conditioning stimulus produced an increased CPM-effect compared with adaptive and increasing conditioning intensities.

Dynamical Behavior of a Rigid Body with One Fixed Point (Gyroscope. Basic Concepts and Results. Open Problems: a Review

Directory of Open Access Journals (Sweden)

Svetoslav Ganchev Nikolov

2015-07-01

Full Text Available The study of the dynamic behavior of a rigid body with one fixed point (gyroscope has a long history. A number of famous mathematicians and mechanical engineers have devoted enormous time and effort to clarify the role of dynamic effects on its movement (behavior – stable, periodic, quasi-periodic or chaotic. The main objectives of this review are: 1 to outline the characteristic features of the theory of dynamical systems and 2 to reveal the specific properties of the motion of a rigid body with one fixed point (gyroscope.This article consists of six sections. The first section addresses the main concepts of the theory of dynamical systems. Section two presents the main theoretical results (obtained so far concerning the dynamic behavior of a solid with one fixed point (gyroscope. Section three examines the problem of gyroscopic stabilization. Section four deals with the non-linear (chaotic dynamics of the gyroscope. Section five is a brief analysis of the gyroscope applications in engineering. The final section provides conclusions and generalizations on why the theory of dynamical systems should be used in the study of the movement of gyroscopic systems.

Fiscal 2000 report on results on development of technology for reducing electrical power consumption at standby time and on R and D of energy saving fixing system; 2000 nendo taikiji shohi denryoku sakugen gijutsu kaihatsu seika hokokusho. Sho energy teichaku system no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In reference to 20 to 40 cpm letter size monochrome digital copiers, R and D was conducted for the purpose of developing an energy-saving fixing system by the combination of a thin-layer thermal-roller fixing unit and a low-fixing-temperature polymerized toner, with the fiscal 2000 results compiled. In the development of the thin-layer thermal-roller fixing unit, a fixing system suitable for toner characteristics was completed, through the optimization of a temperature-stabilizing cooling fan and by a mechanism for detecting anomalous high temperature at the time of a runaway heater, for example. In the research of the low-fixing-temperature polymerized toner, efforts were made toward improving somewhat weak electrostatic chargeability, which was a conventional problem in toner characteristics, and enhancing the thermal/mechanical durability of the toner. In the method of improving electrostatic chargeability, a new process was developed capable of effectively functioning additives in a toner, attaining a level practically free from problems. In the heat resisting characteristic, its enhancement was achieved by developing a method that checks no fused fixing performance at the time of heating for fixing and that imparts a new heat resistivity to a latex surface layer less susceptible to heat inside a copier. (NEDO)

Actinorhizal nitrogen fixing nodules: infection process, molecular ...

African Journals Online (AJOL)

Actinorhizal nitrogen fixing nodules: infection process, molecular biology and genomics. Mariana Obertello, Mame Oureye SY, Laurent Laplaze, Carole Santi, Sergio Svistoonoff, Florence Auguy, Didier Bogusz, Claudine Franche ...

Measurement of strange particle production in the NICA fixed-target programme

Energy Technology Data Exchange (ETDEWEB)

Friese, Volker [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany)

2016-08-15

Strange particles provide a sensitive tool to study the dense and hot matter created in relativistic nuclear collisions. Although strangeness production in such collisions has been a topic of experimental and theoretical research for many years, its understanding is far from being complete. This holds in particular for multi-strange hyperons and for lower collision energies as relevant for NICA and FAIR. Multi-strange particles, being sensitive to both the mechanism of strangeness production and the net-baryon density, are expected to shed light on the state of the created matter and to indicate possible transitions to new phases of strongly interacting matter. We thus advocate the measurement of hyperons and φ mesons in a fixed-target experiment at NICA (BM rate at N), which can be achieved by a relatively compact detector system. (orig.)

Enumerating matroids of fixed rank

NARCIS (Netherlands)

Pendavingh, R.; van der Pol, J.

2017-01-01

It has been conjectured that asymptotically almost all matroids are sparse paving, i.e. that~s(n)∼m(n)s(n)∼m(n), where m(n)m(n) denotes the number of matroids on a fixed groundset of size nn, and s(n)s(n) the number of sparse paving matroids. In an earlier paper, we showed that

Simulation with quantum mechanics/molecular mechanics for drug discovery.

Science.gov (United States)

Barbault, Florent; Maurel, François

2015-10-01

Biological macromolecules, such as proteins or nucleic acids, are (still) molecules and thus they follow the same chemical rules that any simple molecule follows, even if their size generally renders accurate studies unhelpful. However, in the context of drug discovery, a detailed analysis of ligand association is required for understanding or predicting their interactions and hybrid quantum mechanics/molecular mechanics (QM/MM) computations are relevant tools to help elucidate this process. In this review, the authors explore the use of QM/MM for drug discovery. After a brief description of the molecular mechanics (MM) technique, the authors describe the subtractive and additive techniques for QM/MM computations. The authors then present several application cases in topics involved in drug discovery. QM/MM have been widely employed during the last decades to study chemical processes such as enzyme-inhibitor interactions. However, despite the enthusiasm around this area, plain MM simulations may be more meaningful than QM/MM. To obtain reliable results, the authors suggest fixing several keystone parameters according to the underlying chemistry of each studied system.

On generalized fixed sequence procedures for controlling the FWER.

Science.gov (United States)

Qiu, Zhiying; Guo, Wenge; Lynch, Gavin

2015-12-30

Testing a sequence of pre-ordered hypotheses to decide which of these can be rejected or accepted while controlling the familywise error rate (FWER) is of importance in many scientific studies such as clinical trials. In this paper, we first introduce a generalized fixed sequence procedure whose critical values are defined by using a function of the numbers of rejections and acceptances, and which allows follow-up hypotheses to be tested even if some earlier hypotheses are not rejected. We then construct the least favorable configuration for this generalized fixed sequence procedure and present a sufficient condition for the FWER control under arbitrary dependence. Based on the condition, we develop three new generalized fixed sequence procedures controlling the FWER under arbitrary dependence. We also prove that each generalized fixed sequence procedure can be described as a specific closed testing procedure. Through simulation studies and a clinical trial example, we compare the power performance of these proposed procedures with those of the existing FWER controlling procedures. Finally, when the pairwise joint distributions of the true null p-values are known, we further improve these procedures by incorporating pairwise correlation information while maintaining the control of the FWER. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Thiel embalming fluid--a new way to revive formalin-fixed cadaveric specimens.

Science.gov (United States)

Hunter, Amanda; Eisma, Roos; Lamb, Clare

2014-09-01

By soft fixing cadavers using the Thiel embalming method, our cadavers now exhibit a greater degree of flexibility and color retention compared to that of traditional formalin-fixed cadavers. The aim of this experiment was to discover whether Thiel embalming fluid could be used to revive and soften the muscles of formalin-fixed prosected specimens. Earlier this year, two severely dehydrated formalin-fixed forearm and hand specimens were fully submerged in a tank containing Thiel embalming fluid. After a period of six months the specimens were removed from the tank and noticeable changes were observed in flexibility, quality of the tissue, and color of the specimens. © 2014 Wiley Periodicals, Inc.

Iterative approximation of fixed points of nonexpansive mappings

International Nuclear Information System (INIS)

Chidume, C.E.; Chidume, C.O.

2007-07-01

Let K be a nonempty closed convex subset of a real Banach space E which has a uniformly Gateaux differentiable norm and T : K → K be a nonexpansive mapping with F(T) := { x element of K : Tx = x} ≠ 0 . For a fixed δ element of (0, 1), define S : K → K by Sx := (1- δ)x+ δ Tx , for all x element of K. Assume that { z t } converges strongly to a fixed point z of T as t → 0, where z t is the unique element of K which satisfies z t = tu + (1 - t)Tz t for arbitrary u element of K. Let {α n } be a real sequence in (0, 1) which satisfies the following conditions: C1 : lim α n = 0; C2 : Σαn = ∞. For arbitrary x 0 element of K, let the sequence { x n } be defined iteratively by x n+1 = α n u + (1 - α n )Sx n . Then, {x n } converges strongly to a fixed point of T. (author)

32 CFR 37.305 - When may I use a fixed-support TIA?

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false When may I use a fixed-support TIA? 37.305... Investment Agreements § 37.305 When may I use a fixed-support TIA? You may use a fixed-support TIA if: (a... ensure the desired level of cost sharing (see example in § 37.560(b)); and (c) Your TIA does not require...

Optimization of transmission-scan time for the FixER method: a MR-based PET attenuation correction with a weak fixed-position external radiation source

Energy Technology Data Exchange (ETDEWEB)

Kawaguchi, Hiroshi; Hirano, Yoshiyuki; Kershaw, Jeff; Yoshida, Eiji [Molecular Imaging Center, National Institute of Radiological Sciences, Chiba (Japan); Shiraishi, Takahiro [Molecular Imaging Center, National Institute of Radiological Sciences, Chiba (Japan); Research Center for Charged Particle Therapy, National Institute of Radiological Sciences, Chiba (Japan); Suga, Mikio [Molecular Imaging Center, National Institute of Radiological Sciences, Chiba (Japan); Center for Frontier Medical Engineering, Chiba University (Japan); Obata, Takayuki [Molecular Imaging Center, National Institute of Radiological Sciences, Chiba (Japan); Research Center for Charged Particle Therapy, National Institute of Radiological Sciences, Chiba (Japan); Ito, Hiroshi; Yamaya, Taiga [Molecular Imaging Center, National Institute of Radiological Sciences, Chiba (Japan)

2014-07-29

In recent work, we proposed an MRI-based attenuation-coefficient (μ-value) estimation method that uses a weak fixed-position external radiation source to construct an attenuation map for PET/MRI. In this presentation we refer to this method as FixER, and perform a series of simulations to investigate the duration of the transmission scan required to accurately estimate μ-values.

Optimization of transmission-scan time for the FixER method: a MR-based PET attenuation correction with a weak fixed-position external radiation source

International Nuclear Information System (INIS)

Kawaguchi, Hiroshi; Hirano, Yoshiyuki; Kershaw, Jeff; Yoshida, Eiji; Shiraishi, Takahiro; Suga, Mikio; Obata, Takayuki; Ito, Hiroshi; Yamaya, Taiga

2014-01-01

In recent work, we proposed an MRI-based attenuation-coefficient (μ-value) estimation method that uses a weak fixed-position external radiation source to construct an attenuation map for PET/MRI. In this presentation we refer to this method as FixER, and perform a series of simulations to investigate the duration of the transmission scan required to accurately estimate μ-values.

On Determining if Tree-based Networks Contain Fixed Trees.

Science.gov (United States)

Anaya, Maria; Anipchenko-Ulaj, Olga; Ashfaq, Aisha; Chiu, Joyce; Kaiser, Mahedi; Ohsawa, Max Shoji; Owen, Megan; Pavlechko, Ella; St John, Katherine; Suleria, Shivam; Thompson, Keith; Yap, Corrine

2016-05-01

We address an open question of Francis and Steel about phylogenetic networks and trees. They give a polynomial time algorithm to decide if a phylogenetic network, N, is tree-based and pose the problem: given a fixed tree T and network N, is N based on T? We show that it is [Formula: see text]-hard to decide, by reduction from 3-Dimensional Matching (3DM) and further that the problem is fixed-parameter tractable.

Nanomechanics of layer-by-layer polyelectrolyte complexes: a manifestation of ionic cross-links and fixed charges.

Science.gov (United States)

Han, Biao; Chery, Daphney R; Yin, Jie; Lu, X Lucas; Lee, Daeyeon; Han, Lin

2016-01-28

This study investigates the roles of two distinct features of ionically cross-linked polyelectrolyte networks - ionic cross-links and fixed charges - in determining their nanomechanical properties. The layer-by-layer assembled poly(allylamine hydrochloride)/poly(acrylic acid) (PAH/PAA) network is used as the model material. The densities of ionic cross-links and fixed charges are modulated through solution pH and ionic strength (IS), and the swelling ratio, elastic and viscoelastic properties are quantified via an array of atomic force microscopy (AFM)-based nanomechanical tools. The roles of ionic cross-links are underscored by the distinctive elastic and viscoelastic nanomechanical characters observed here. First, as ionic cross-links are highly sensitive to solution conditions, the instantaneous modulus, E0, exhibits orders-of-magnitude changes upon pH- and IS-governed swelling, distinctive from the rubber elasticity prediction based on permanent covalent cross-links. Second, ionic cross-links can break and self-re-form, and this mechanism dominates force relaxation of PAH/PAA under a constant indentation depth. In most states, the degree of relaxation is >90%, independent of ionic cross-link density. The importance of fixed charges is highlighted by the unexpectedly more elastic nature of the network despite low ionic cross-link density at pH 2.0, IS 0.01 M. Here, the complex is a net charged, loosely cross-linked, where the degree of relaxation is attenuated to ≈50% due to increased elastic contribution arising from fixed charge-induced Donnan osmotic pressure. In addition, this study develops a new method for quantifying the thickness of highly swollen polymer hydrogel films. It also underscores important technical considerations when performing nanomechanical tests on highly rate-dependent polymer hydrogel networks. These results provide new insights into the nanomechanical characters of ionic polyelectrolyte complexes, and lay the ground for further

Energy isn't Everything: CERN's Fixed Target Niche (1/2)

CERN Multimedia

CERN. Geneva

2008-01-01

Fixed target physics at CERN remains an essential part of the laboratory's scientific programme and horizon. In recent years fixed target and decay physics using CERN's unique accelerator and beam facilities continues enabling unique experiments to be undertaken. An overview is presented of the status of this physics and, wherever appropriate, of its future.

Energy isn't Everything: CERN's Fixed Target Niche (2/2)

CERN Multimedia

CERN. Geneva

2008-01-01

Fixed target physics at CERN remains an essential part of the laboratory's scientific programme and horizon. In recent years fixed target and decay physics using CERN's unique accelerator and beam facilities continues enabling unique experiments to be undertaken. An overview is presented of the status of this physics and, wherever appropriate, of its future.

Fixed-Time Schedule Effects in Combination with Response-Dependent Schedules

Science.gov (United States)

Borrero, John C.; Bartels-Meints, Jamie A.; Sy, Jolene R.; Francisco, Monica T.

2011-01-01

We evaluated the effects of fixed-interval (FI), fixed-time (FT), and conjoint (combined) FI FT reinforcement schedules on the responding of 3 adults who had been diagnosed with schizophrenia. Responding on vocational tasks decreased for 2 of 3 participants under FT alone relative to FI alone. Responding under FI FT resulted in response…

Gauge fixing, BRS invariance and Ward identities for randomly stirred flows

International Nuclear Information System (INIS)

Berera, Arjun; Hochberg, David

2009-01-01

The Galilean invariance of the Navier-Stokes equation is shown to be akin to a global gauge symmetry familiar from quantum field theory. This symmetry leads to a multiple counting of infinitely many inertial reference frames in the path integral approach to randomly stirred fluids. This problem is solved by fixing the gauge, i.e., singling out one reference frame. The gauge fixed theory has an underlying Becchi-Rouet-Stora (BRS) symmetry which leads to the Ward identity relating the exact inverse response and vertex functions. This identification of Galilean invariance as a gauge symmetry is explored in detail, for different gauge choices and by performing a rigorous examination of a discretized version of the theory. The Navier-Stokes equation is also invariant under arbitrary rectilinear frame accelerations, known as extended Galilean invariance (EGI). We gauge fix this extended symmetry and derive the generalized Ward identity that follows from the BRS invariance of the gauge-fixed theory. This new Ward identity reduces to the standard one in the limit of zero acceleration. This gauge-fixing approach unambiguously shows that Galilean invariance and EGI constrain only the zero mode of the vertex but none of the higher wavenumber modes.

Gauge fixing, BRS invariance and Ward identities for randomly stirred flows

Energy Technology Data Exchange (ETDEWEB)

Berera, Arjun [School of Physics and Astronomy, University of Edinburgh, Edinburgh, EH9 3JZ (United Kingdom)], E-mail: ab@ph.ed.ac.uk; Hochberg, David [Centro de Astrobiologia (CSIC-INTA), Ctra. Ajalvir Km. 4, 28850 Torrejon de Ardoz, Madrid (Spain)], E-mail: hochbergd@inta.es

2009-06-21

The Galilean invariance of the Navier-Stokes equation is shown to be akin to a global gauge symmetry familiar from quantum field theory. This symmetry leads to a multiple counting of infinitely many inertial reference frames in the path integral approach to randomly stirred fluids. This problem is solved by fixing the gauge, i.e., singling out one reference frame. The gauge fixed theory has an underlying Becchi-Rouet-Stora (BRS) symmetry which leads to the Ward identity relating the exact inverse response and vertex functions. This identification of Galilean invariance as a gauge symmetry is explored in detail, for different gauge choices and by performing a rigorous examination of a discretized version of the theory. The Navier-Stokes equation is also invariant under arbitrary rectilinear frame accelerations, known as extended Galilean invariance (EGI). We gauge fix this extended symmetry and derive the generalized Ward identity that follows from the BRS invariance of the gauge-fixed theory. This new Ward identity reduces to the standard one in the limit of zero acceleration. This gauge-fixing approach unambiguously shows that Galilean invariance and EGI constrain only the zero mode of the vertex but none of the higher wavenumber modes.

fixedTimeEvents: An R package for the distribution of distances between discrete events in fixed time

Directory of Open Access Journals (Sweden)

Kristian Hovde Liland

2016-01-01

Full Text Available When a series of Bernoulli trials occur within a fixed time frame or limited space, it is often interesting to assess if the successful outcomes have occurred completely at random, or if they tend to group together. One example, in genetics, is detecting grouping of genes within a genome. Approximations of the distribution of successes are possible, but they become inaccurate for small sample sizes. In this article, we describe the exact distribution of time between random, non-overlapping successes in discrete time of fixed length. A complete description of the probability mass function, the cumulative distribution function, mean, variance and recurrence relation is included. We propose an associated test for the over-representation of short distances and illustrate the methodology through relevant examples. The theory is implemented in an R package including probability mass, cumulative distribution, quantile function, random number generator, simulation functions, and functions for testing.

Fixed Target Collisions at STAR

Energy Technology Data Exchange (ETDEWEB)

Meehan, Kathryn C.

2016-12-15

The RHIC Beam Energy Scan (BES) program was proposed to look for the turn-off of signatures of the quark gluon plasma (QGP), search for a possible QCD critical point, and study the nature of the phase transition between hadronic and partonic matter. Previous results have been used to claim that the onset of deconfinement occurs at a center-of-mass energy of 7 GeV. Data from lower energies are needed to test if this onset occurs. The goal of the STAR Fixed-Target Program is to extend the collision energy range in BES II to energies that are likely below the onset of deconfinement. Currently, STAR has inserted a gold target into the beam pipe and conducted test runs at center-of-mass energies of 3.9 and 4.5 GeV. Tests have been done with both Au and Al beams. First physics results from a Coulomb potential analysis of Au + Au fixed-target collisions are presented and are found to be consistent with results from previous experiments. Furthermore, the Coulomb potential, which is sensitive to the Z of the projectile and degree of baryonic stopping, will be compared to published results from the AGS.

Utilization of nitrogen fixing trees

Energy Technology Data Exchange (ETDEWEB)

Brewbaker, J.L.; Beldt, R. van den; MacDicken, K.; Budowski, G.; Kass, D.C.L.; Russo, R.O.; Escalante, G.; Herrera, R.; Aranguren, J.; Arkcoll, D.B.; Doebereinger, J. (cord.)

1983-01-01

Six papers from the symposium are noted. Brewbaker, J.L., Beldt, R. van den, MacDicken, K. Fuelwood uses and properties of nitrogen-fixing trees, pp 193-204, (Refs. 15). Includes a list of 35 nitrogen-fixing trees of high fuelwood value. Budowski, G.; Kass, D.C.L.; Russo, R.O. Leguminous trees for shade, pp 205-222, (Refs. 68). Escalante, G., Herrera, R., Aranguren, J.; Nitrogen fixation in shade trees (Erythrina poeppigiana) in cocoa plantations in northern Venezuela, pp 223-230, (Refs. 13). Arkcoll, D.B.; Some leguminous trees providing useful fruits in the North of Brazil, pp 235-239, (Refs. 13). This paper deals with Parkia platycephala, Pentaclethra macroloba, Swartzia sp., Cassia leiandra, Hymenaea courbaril, dipteryz odorata, Inga edulis, I. macrophylla, and I. cinnamonea. Baggio, A.J.; Possibilities of the use of Gliricidia sepium in agroforestry systems in Brazil, pp 241-243; (Refs. 15). Seiffert, N.F.; Biological nitrogen and protein production of Leucaena cultivars grown to supplement the nutrition of ruminants, pp 245-249, (Refs. 14). Leucaena leucocephala cv. Peru, L. campina grande (L. leucocephala), and L. cunningham (L. leucocephalae) were promising for use as browse by beef cattle in central Brazil.

The single-sink fixed-charge transportation problem: Applications and solution methods

DEFF Research Database (Denmark)

Goertz, Simon; Klose, Andreas

2007-01-01

The single-sink fixed-charge transportation problem (SSFCTP) consists in finding a minimum cost flow from a number of supplier nodes to a single demand node. Shipping costs comprise costs proportional to the amount shipped as well as a fixed-charge. Although the SSFCTP is an important special case...... of the well-known fixed-charge transportation problem, just a few methods for solving this problem have been proposed in the literature. After summarising some applications of this problem arising in manufacturing and transportation, we give an overview on approximation algorithms and worst-case results...

Masslessness of ghosts in equivariantly gauge-fixed Yang-Mills theories

International Nuclear Information System (INIS)

Golterman, Maarten; Zimmerman, Leah

2005-01-01

We show that the one-loop ghost self-energy in an equivariantly gauge-fixed Yang-Mills theory vanishes at zero momentum. A ghost mass is forbidden by equivariant BRST symmetry, and our calculation confirms this explicitly. The four-ghost self interaction which appears in the equivariantly gauge-fixed Yang-Mills theory is needed in order to obtain this result

Mechanical/structural performance test method of a spacer grid

International Nuclear Information System (INIS)

Yoon, Kyung Ho

2000-06-01

The spacer grid is one of the main structural components in the fuel assembly, which supports the fuel rods, guides cooling water, and protects the system from an external impact load, such as earthquakes. In order to develop the spacer grid with the high mechanical performance, the mechanical and structural properties of the spacer grids must be extensively examined while designing it. In this report, the mechanical/structural test methods, i.e. the characteristic test of a spacer grid spring or dimple, static buckling test of a partial or full size spacer grid and dynamic impact test of them are described. The characteristic test of a spacer grid spring or dimple is accomplished with universal tensile test machine, a specimen is fixed with test fixture and then applied compressive load. The characteristic test data is saved at loading and unloading event. The static buckling test of a partial or full size spacer grid is executed with the same universal tensile testing machine, a specimen is fixed between cross-heads and then applied the compressive load. The buckling strength is decided the maximum strength at load vs. displacement curve. The dynamic impact test of a partial or full size spacer grid is performed with pendulum type impact machine and free fall shock test machine, a specimen is fixed with test fixture and then applied the impact load by impact hammer. Specially, the pendulum type impact test machine is also possible under the operating temperature because a furnace is separately attached with test machine

Three Boundary Conditions for Computing the Fixed-Point Property in Binary Mixture Data.

Directory of Open Access Journals (Sweden)

Leendert van Maanen

Full Text Available The notion of "mixtures" has become pervasive in behavioral and cognitive sciences, due to the success of dual-process theories of cognition. However, providing support for such dual-process theories is not trivial, as it crucially requires properties in the data that are specific to mixture of cognitive processes. In theory, one such property could be the fixed-point property of binary mixture data, applied-for instance- to response times. In that case, the fixed-point property entails that response time distributions obtained in an experiment in which the mixture proportion is manipulated would have a common density point. In the current article, we discuss the application of the fixed-point property and identify three boundary conditions under which the fixed-point property will not be interpretable. In Boundary condition 1, a finding in support of the fixed-point will be mute because of a lack of difference between conditions. Boundary condition 2 refers to the case in which the extreme conditions are so different that a mixture may display bimodality. In this case, a mixture hypothesis is clearly supported, yet the fixed-point may not be found. In Boundary condition 3 the fixed-point may also not be present, yet a mixture might still exist but is occluded due to additional changes in behavior. Finding the fixed-property provides strong support for a dual-process account, yet the boundary conditions that we identify should be considered before making inferences about underlying psychological processes.

Manipulations of the features of standard video lottery terminal (VLT) games: effects in pathological and non-pathological gamblers.

Science.gov (United States)

Loba, P; Stewart, S H; Klein, R M; Blackburn, J R

2001-01-01

The present study was conducted to identify game parameters that would reduce the risk of abuse of video lottery terminals (VLTs) by pathological gamblers, while exerting minimal effects on the behavior of non-pathological gamblers. Three manipulations of standard VLT game features were explored. Participants were exposed to: a counter which displayed a running total of money spent; a VLT spinning reels game where participants could no longer "stop" the reels by touching the screen; and sensory feature manipulations. In control conditions, participants were exposed to standard settings for either a spinning reels or a video poker game. Dependent variables were self-ratings of reactions to each set of parameters. A set of 2(3) x 2 x 2 (game manipulation [experimental condition(s) vs. control condition] x game [spinning reels vs. video poker] x gambler status [pathological vs. non-pathological]) repeated measures ANOVAs were conducted on all dependent variables. The findings suggest that the sensory manipulations (i.e., fast speed/sound or slow speed/no sound manipulations) produced the most robust reaction differences. Before advocating harm reduction policies such as lowering sensory features of VLT games to reduce potential harm to pathological gamblers, it is important to replicate findings in a more naturalistic setting, such as a real bar.

Future opportunities in production of disposable optics and electronics

Science.gov (United States)

Korhonen, Raimo

2001-05-01

The several production methods of paper processing chain can be used, by analogy, to generate novel ideas for production of optics and electronics. Paper processing is a very fast reel-to-reel process: In the beginning of the paper web production the process is running at the speed of over thousand meters per minute and the web width can be 10 meters, and still at the later stages the speed is several hundreds of meters per minute with the web width of a couple of meters. There are several potential reel-to-reel production methods like embossing, printing, laminating and different kinds of vacuum coating, for example evaporation and sputtering. End products are complex multi-layer composite structures. The benefits from this analogy for optics and electronics would be ideas for ultra fast production, paper-like disposable and recyclable products and the integration of optics and electronics into ordinary things like books, wallpapers, tissue papers and packages. Two experiments are presented to demonstrate the possibilities. In the first experiment optical patterns are embossed directly on paper. In the second one conductive polymers are printed on paper and plastic webs. In future, a wide network of cooperation will be needed to realize all the opportunities.

Measures of Noncircularity and Fixed Points of Contractive Multifunctions

Directory of Open Access Journals (Sweden)

Marrero Isabel

2010-01-01

Full Text Available In analogy to the Eisenfeld-Lakshmikantham measure of nonconvexity and the Hausdorff measure of noncompactness, we introduce two mutually equivalent measures of noncircularity for Banach spaces satisfying a Cantor type property, and apply them to establish a fixed point theorem of Darbo type for multifunctions. Namely, we prove that every multifunction with closed values, defined on a closed set and contractive with respect to any one of these measures, has the origin as a fixed point.

Fixed-Target Electron Accelerators

International Nuclear Information System (INIS)

Brooks, William K.

2001-01-01

A tremendous amount of scientific insight has been garnered over the past half-century by using particle accelerators to study physical systems of sub-atomic dimensions. These giant instruments begin with particles at rest, then greatly increase their energy of motion, forming a narrow trajectory or beam of particles. In fixed-target accelerators, the particle beam impacts upon a stationary sample or target which contains or produces the sub-atomic system being studied. This is in distinction to colliders, where two beams are produced and are steered into each other so that their constituent particles can collide. The acceleration process always relies on the particle being accelerated having an electric charge; however, both the details of producing the beam and the classes of scientific investigations possible vary widely with the specific type of particle being accelerated. This article discusses fixed-target accelerators which produce beams of electrons, the lightest charged particle. As detailed in the report, the beam energy has a close connection with the size of the physical system studied. Here a useful unit of energy is a GeV, i.e., a giga electron-volt. (ne GeV, the energy an electron would have if accelerated through a billion volts, is equal to 1.6 x 10 -10 joules.) To study systems on a distance scale much smaller than an atomic nucleus requires beam energies ranging from a few GeV up to hundreds of GeV and more

FIXING HEALTH SYSTEMS / Executive Summary (2008 update ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-12-14

Dec 14, 2010 ... FIXING HEALTH SYSTEMS / Executive Summary (2008 update) ... In several cases, specific approaches recommended by the TEHIP team have been acted upon regionally and internationally, including the ... Related articles ...

Biomass gasification in fixed bed type down draft: theoretical and experimental aspects; Gasificacao de biomassa em leito fixo tipo concorrente: aspectos teoricos e experimentais

Energy Technology Data Exchange (ETDEWEB)

Martinez, Juan Daniel; Andrade, Rubenildo Vieira; Lora, Electo Eduardo Silva [Universidade Federal de Itajuba (UNIFEI), MG (Brazil). Inst. de Engenharia Mecanica. Nucleo de Excelencia em Geracao Termeletrica e Distribuida

2008-07-01

Actually are recognizing the advantages of biomass in reducing dependence on fossil fuels and significant reduction in emissions of greenhouse effect gases such as Co2. Also are known the different conversion of biomass routes for their use or exploitation, such as thermochemical process (gasification, pyrolysis and combustion), the biological process (fermentation and transesterification) and the physical process (densification, reducing grain and mechanical pressing). In this sense, the gasification is regarded as the most promising mechanism to obtain a homogeneous gaseous fuel with sufficient quality in the small scale distributed generation. This work presents some aspects of biomass gasification in fixed bed, as well as some preliminary results in the evaluation and operation of fixed bed down draft gasifier with double stage air supply of the NEST, identifying the adequate air supply quantity (equivalence ratio in the range of 0,35 to 0,45) for obtaining a fuel gas with lower heating value around 4 MJ/N m3. (author)

Watching harmonics beat

Science.gov (United States)

Keeports, David

2015-04-01

Suppose you record a song on magnetic tape and duplicate your recording. You then simultaneously play back both tapes. To the rim of one of the tape reels, also known as the reel's flange, you keep applying gentle pressure and then releasing that pressure so that your reel alternates between slightly lagging the other and then catching up with it. The resulting small pitch differences between the two tapes give rise to an intriguing and pleasant sound often described as swirling or jet-like. A Wikipedia article1 lists dozens of popular songs that incorporate this "flanging" effect. Well represented are songs by the Beatles and Jimi Hendrix as well as by artists from recent decades. But perhaps the most important is an obscure 1945 recording by guitarist and musical inventor Les Paul, who is recognized as the discoverer of flanging.

Area law for fixed points of rapidly mixing dissipative quantum systems

Energy Technology Data Exchange (ETDEWEB)

Brandão, Fernando G. S. L. [Quantum Architectures and Computation Group, Microsoft Research, Redmond, Washington 98052 (United States); Department of Computer Science, University College London, Gower Street, London WC1E 6BT (United Kingdom); Cubitt, Toby S. [Department of Computer Science, University College London, Gower Street, London WC1E 6BT (United Kingdom); DAMTP, University of Cambridge, Cambridge (United Kingdom); Lucia, Angelo, E-mail: anlucia@ucm.es [Departamento de Análisis Matemático, Universidad Complutense de Madrid, Madrid (Spain); Michalakis, Spyridon [Institute for Quantum Information and Matter, Caltech, California 91125 (United States); Perez-Garcia, David [Departamento de Análisis Matemático, Universidad Complutense de Madrid, Madrid (Spain); IMI, Universidad Complutense de Madrid, Madrid (Spain); ICMAT, C/Nicolás Cabrera, Campus de Cantoblanco, 28049 Madrid (Spain)

2015-10-15

We prove an area law with a logarithmic correction for the mutual information for fixed points of local dissipative quantum system satisfying a rapid mixing condition, under either of the following assumptions: the fixed point is pure or the system is frustration free.

Torque resistance of different stainless steel wires commonly used for fixed retainers in orthodontics.

Science.gov (United States)

Arnold, Dario T; Dalstra, Michel; Verna, Carlalberta

2016-06-01

Movements of teeth splinted by fixed retention wires after orthodontic treatment have been observed. The aetiological factors for these movements are unknown. The aim of this in vitro study was to compare the resistance to torque of different stainless steel wires commonly used for fixed retainers in orthodontics. Torquing moments acting on a retainer wire were measured in a mechanical force testing system by applying buccal crown torque to an upper lateral incisor in both a 3-teeth and in a 2-teeth setup. Seven stainless steel wires with different shape, type (plain, braided, coaxial, or chain) and dimensions were selected for this study. For a torquing angle of 16.2° in the 3-teeth setup torsion moments can vary between 390 cNmm and 3299 cNmm depending on the retainer wire. For the 2-teeth setup the torsion moments are much smaller. Exposure to the flame of a butane-gas torch for 10 seconds to anneal the wire reduces the stiffness of the retainer wire. Clinicians must select wires for fixed retainers very carefully since the difference in resistance to torque is large. A high level of torque control can be achieved with a plain 0.016 × 0.016-inch or a braided 0.016 × 0.022-inch stainless steel wire. A tooth attached by a retainer wire to only one neighbouring tooth is less resistant to torque than a tooth connected to two neighbouring teeth. Annealing a retainer wire with a flame reduces the stiffness of the wire markedly and can lead to a non-uniform and non-reproducible effect.

Noise power spectrum of the fixed pattern noise in digital radiography detectors

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Sik, E-mail: dskim@hufs.ac.kr [Department of Electronics Engineering, Hankuk University of Foreign Studies, Gyeonggi-do 449-791 (Korea, Republic of); Kim, Eun [R& D Center, DRTECH Co., Gyeonggi-do 13558 (Korea, Republic of)

2016-06-15

Purpose: The fixed pattern noise in radiography image detectors is caused by various sources. Multiple readout circuits with gate drivers and charge amplifiers are used to efficiently acquire the pixel voltage signals. However, the multiple circuits are not identical and thus yield nonuniform system gains. Nonuniform sensitivities are also produced from local variations in the charge collection elements. Furthermore, in phosphor-based detectors, the optical scattering at the top surface of the columnar CsI growth, the grain boundaries, and the disorder structure causes spatial sensitivity variations. These nonuniform gains or sensitivities cause fixed pattern noise and degrade the detector performance, even though the noise problem can be partially alleviated by using gain correction techniques. Hence, in order to develop good detectors, comparative analysis of the energy spectrum of the fixed pattern noise is important. Methods: In order to observe the energy spectrum of the fixed pattern noise, a normalized noise power spectrum (NNPS) of the fixed pattern noise is considered in this paper. Since the fixed pattern noise is mainly caused by the nonuniform gains, we call the spectrum the gain NNPS. We first asymptotically observe the gain NNPS and then formulate two relationships to calculate the gain NNPS based on a nonuniform-gain model. Since the gain NNPS values are quite low compared to the usual NNPS, measuring such a low NNPS value is difficult. By using the average of the uniform exposure images, a robust measuring method for the gain NNPS is proposed in this paper. Results: By using the proposed measuring method, the gain NNPS curves of several prototypes of general radiography and mammography detectors were measured to analyze their fixed pattern noise properties. We notice that a direct detector, which is based on the a-Se photoconductor, showed lower gain NNPS than the indirect-detector case, which is based on the CsI scintillator. By comparing the gain

Comments on the Gauge Fixed BRST Cohomology and the Quantum Noether Method

CERN Document Server

Barnich, G; Skenderis, K; Barnich, Glenn; Hurth, Tobias; Skenderis, Kostas

2004-01-01

We discuss in detail the relation between the gauge fixed and gauge invariant BRST cohomology. In particular in certain gauges some cohomology classes of the gauge fixed BRST differential do not correspond to gauge invariant observables, and in addition ``accidental'' conserved currents may appear. These correspond 1-1 to observables that become trivial in this gauge. We explicitly show how the gauge fixed BRST cohomology appears in the context of the Quantum Noether Method.

Cross-pinning: the philosophy of retrievability applied practically to fixed, implant-supported prostheses.

Science.gov (United States)

Gervais, M J; Hatzipanagiotis, P; Wilson, P R

2008-03-01

Biologic and technical complications are widely reported in the dental literature and often compromise the functional and/or aesthetic features of fixed, implant-supported prostheses. Managing complications without damaging or destroying a restoration is an obvious advantage of implant-based dentistry where the option of prosthetic retrievability is almost always available. The technique of cross-pinning uses a transverse screw to secure a prosthesis to a milled implant abutment, allowing prosthetic retrievability irrespective of dental implant alignment. This study presents guidelines for cross-pinning implant-supported prostheses based on resistance form, screw mechanics and natural tooth contours. The technical aspects of cross-pinning are also discussed using examples from four implant systems.

Towards the characterization of short-term memory of zebrafish: effect of fixed versus random reward location.

Science.gov (United States)

Fernandes, Yohaan; Talpos, Andrea; Gerlai, Robert

2015-01-02

The zebrafish has been proposed as an efficient tool for the analysis of behavioral and neurobiological mechanisms of learning and memory. However, compared to traditional laboratory rodents, it is a relatively newcomer. In fact, only limited information on its mnemonic and cognitive abilities has been obtained, and only a small number of learning and memory paradigms have been available for its testing. Previously, we have shown that zebrafish are capable of learning the systematic alternating sequence of reward location in a shuttle box task in which we evaluated behavioral responses manually. Here, we employ a computerized, automated version of this task. We study whether zebrafish can remember the prior location of a reward (the sight of conspecifics) when the location is fixed (constant), or when the sequence of the location of presentation randomly changes between the left and the right side of the experimental tank. We also analyze performance features including the swim speed of experimental fish as well as the temporal changes of the position of fish when the reward (stimulus) is not presented. Our results show that under both the fixed and randomly changing reward location conditions zebrafish exhibit a significant preference for the prior location of reward, albeit the preference is stronger under the fixed location condition. We conclude that adult zebrafish have short-term associative memory that can be induced and quantified in an automated manner. Copyright © 2014 Elsevier Inc. All rights reserved.

Cephalometric effects of the Jones Jig appliance followed by fixed appliances in Class II malocclusion treatment.

Science.gov (United States)

Patel, Mayara Paim; Henriques, José Fernando Castanha; Freitas, Karina Maria Salvatore; Grec, Roberto Henrique da Costa

2014-01-01

The aim of this study was to cephalometrically assess the skeletal and dentoalveolar effects of Class II malocclusion treatment performed with the Jones Jig appliance followed by fixed appliances. The sample comprised 25 patients with Class II malocclusion treated with the Jones Jig appliance followed by fixed appliances, at a mean initial age of 12.90 years old. The mean time of the entire orthodontic treatment was 3.89 years. The distalization phase lasted for 0.85 years, after which the fixed appliance was used for 3.04 years. Cephalograms were used at initial (T1), post-distalization (T2) and final phases of treatment (T3). For intragroup comparison of the three phases evaluated, dependent ANOVA and Tukey tests were used. Jones Jig appliance did not interfere in the maxillary and mandibular component and did not change maxillomandibular relationship. Jones Jig appliance promoted distalization of first molars with anchorage loss, mesialization and significant extrusion of first and second premolars, as well as a significant increase in anterior face height at the end of treatment. The majority of adverse effects that occur during intraoral distalization are subsequently corrected during corrective mechanics. Buccal inclination and protrusion of mandibular incisors were identified. By the end of treatment, correction of overjet and overbite was observed. Jones Jig appliance promoted distalization of first molars with anchorage loss represented by significant mesial movement and extrusion of first and second premolars, in addition to a significant increase in anterior face height.

Metabolic profiling of two maize (Zea mays L.) inbred lines inoculated with the nitrogen fixing plant-interacting bacteria Herbaspirillum seropedicae and Azospirillum brasilense

Science.gov (United States)

Brusamarello-Santos, Liziane Cristina; Gilard, Françoise; Brulé, Lenaïg; Quilleré, Isabelle; Gourion, Benjamin; Ratet, Pascal; Maltempi de Souza, Emanuel; Lea, Peter J.; Hirel, Bertrand

2017-01-01

Maize roots can be colonized by free-living atmospheric nitrogen (N2)-fixing bacteria (diazotrophs). However, the agronomic potential of non-symbiotic N2-fixation in such an economically important species as maize, has still not been fully exploited. A preliminary approach to improve our understanding of the mechanisms controlling the establishment of such N2-fixing associations has been developed, using two maize inbred lines exhibiting different physiological characteristics. The bacterial-plant interaction has been characterized by means of a metabolomic approach. Two established model strains of Nif+ diazotrophic bacteria, Herbaspirillum seropedicae and Azospirillum brasilense and their Nif- couterparts defficient in nitrogenase activity, were used to evaluate the impact of the bacterial inoculation and of N2 fixation on the root and leaf metabolic profiles. The two N2-fixing bacteria have been used to inoculate two genetically distant maize lines (FV252 and FV2), already characterized for their contrasting physiological properties. Using a well-controlled gnotobiotic experimental system that allows inoculation of maize plants with the two diazotrophs in a N-free medium, we demonstrated that both maize lines were efficiently colonized by the two bacterial species. We also showed that in the early stages of plant development, both bacterial strains were able to reduce acetylene, suggesting that they contain functional nitrogenase activity and are able to efficiently fix atmospheric N2 (Fix+). The metabolomic approach allowed the identification of metabolites in the two maize lines that were representative of the N2 fixing plant-bacterial interaction, these included mannitol and to a lesser extend trehalose and isocitrate. Whilst other metabolites such as asparagine, although only exhibiting a small increase in maize roots following bacterial infection, were specific for the two Fix+ bacterial strains, in comparison to their Fix- counterparts. Moreover, a number

Metabolic profiling of two maize (Zea mays L. inbred lines inoculated with the nitrogen fixing plant-interacting bacteria Herbaspirillum seropedicae and Azospirillum brasilense.

Directory of Open Access Journals (Sweden)

Liziane Cristina Brusamarello-Santos

Full Text Available Maize roots can be colonized by free-living atmospheric nitrogen (N2-fixing bacteria (diazotrophs. However, the agronomic potential of non-symbiotic N2-fixation in such an economically important species as maize, has still not been fully exploited. A preliminary approach to improve our understanding of the mechanisms controlling the establishment of such N2-fixing associations has been developed, using two maize inbred lines exhibiting different physiological characteristics. The bacterial-plant interaction has been characterized by means of a metabolomic approach. Two established model strains of Nif+ diazotrophic bacteria, Herbaspirillum seropedicae and Azospirillum brasilense and their Nif- couterparts defficient in nitrogenase activity, were used to evaluate the impact of the bacterial inoculation and of N2 fixation on the root and leaf metabolic profiles. The two N2-fixing bacteria have been used to inoculate two genetically distant maize lines (FV252 and FV2, already characterized for their contrasting physiological properties. Using a well-controlled gnotobiotic experimental system that allows inoculation of maize plants with the two diazotrophs in a N-free medium, we demonstrated that both maize lines were efficiently colonized by the two bacterial species. We also showed that in the early stages of plant development, both bacterial strains were able to reduce acetylene, suggesting that they contain functional nitrogenase activity and are able to efficiently fix atmospheric N2 (Fix+. The metabolomic approach allowed the identification of metabolites in the two maize lines that were representative of the N2 fixing plant-bacterial interaction, these included mannitol and to a lesser extend trehalose and isocitrate. Whilst other metabolites such as asparagine, although only exhibiting a small increase in maize roots following bacterial infection, were specific for the two Fix+ bacterial strains, in comparison to their Fix- counterparts

Metabolic profiling of two maize (Zea mays L.) inbred lines inoculated with the nitrogen fixing plant-interacting bacteria Herbaspirillum seropedicae and Azospirillum brasilense.

Science.gov (United States)

Brusamarello-Santos, Liziane Cristina; Gilard, Françoise; Brulé, Lenaïg; Quilleré, Isabelle; Gourion, Benjamin; Ratet, Pascal; Maltempi de Souza, Emanuel; Lea, Peter J; Hirel, Bertrand

2017-01-01

Maize roots can be colonized by free-living atmospheric nitrogen (N2)-fixing bacteria (diazotrophs). However, the agronomic potential of non-symbiotic N2-fixation in such an economically important species as maize, has still not been fully exploited. A preliminary approach to improve our understanding of the mechanisms controlling the establishment of such N2-fixing associations has been developed, using two maize inbred lines exhibiting different physiological characteristics. The bacterial-plant interaction has been characterized by means of a metabolomic approach. Two established model strains of Nif+ diazotrophic bacteria, Herbaspirillum seropedicae and Azospirillum brasilense and their Nif- couterparts defficient in nitrogenase activity, were used to evaluate the impact of the bacterial inoculation and of N2 fixation on the root and leaf metabolic profiles. The two N2-fixing bacteria have been used to inoculate two genetically distant maize lines (FV252 and FV2), already characterized for their contrasting physiological properties. Using a well-controlled gnotobiotic experimental system that allows inoculation of maize plants with the two diazotrophs in a N-free medium, we demonstrated that both maize lines were efficiently colonized by the two bacterial species. We also showed that in the early stages of plant development, both bacterial strains were able to reduce acetylene, suggesting that they contain functional nitrogenase activity and are able to efficiently fix atmospheric N2 (Fix+). The metabolomic approach allowed the identification of metabolites in the two maize lines that were representative of the N2 fixing plant-bacterial interaction, these included mannitol and to a lesser extend trehalose and isocitrate. Whilst other metabolites such as asparagine, although only exhibiting a small increase in maize roots following bacterial infection, were specific for the two Fix+ bacterial strains, in comparison to their Fix- counterparts. Moreover, a number

Fabrication of cold-rolled bands of the alloy-ehi 702 in rolls

International Nuclear Information System (INIS)

Zhuchin, V.N.; Gindin, A.Sh.; Shaburov, V.E.; Vladimirov, S.M.; Sokolov, V.A.; Shavkun, V.V.; Perepelitsa, I.V.; Markov, V.V.; Naymov, E.P.; Evstaf'ev, P.P.

1977-01-01

The questions are discussed, connected with the manufacture of cold-rolled strip of alloy EI702 in reels from strip blanks. It has been established that in the manufacture of hot-rolled stock from EI702 slabs it is necessary to use powerful rolling equipment because of high resistance to deformation. The reel method for manufacturing EI702 alloy improves the rolled stock and increases percentage of serviceable stock, as well as the output

Sklízecí ústrojí sklízecí mlátičky pro sklizeň obilovin

OpenAIRE

Friedl, Pavel

2014-01-01

In the bachelor thesis, the issues of organ harvesting combines for harvesting cereals, their distribution and inclusion in workflows harvest. The thesis deals with the various functional parts of harvesting system, is briefly described theories reel supplemented track structure finger reel adapters New Holland. The next section the an overview of selected producers of harvesting system, their advantages and disadvantages. In the last section is a tabular overview of selected parameters descr...

Fixed-Time Outer Synchronization of Complex Networks with Noise Coupling

Science.gov (United States)

Shi, Hong-Jun; Miao, Lian-Ying; Sun, Yong-Zheng; Liu, Mao-Xing

2018-03-01

In this paper, the fixed-time outer synchronization of complex networks with noise coupling is investigated. Based on the theory of fixed-time stability and matrix inequalities, sufficient conditions for fixed-time outer synchronization are established and the estimation of the upper bound of the setting time is obtained. The result shows that the setting time can be adjusted to a desired value regardless of the initial states. Numerical simulations are performed to verify the effectiveness of the theoretical results. The effects of control parameters and the density of controlled nodes on the converging time are studied. Supported by the National Natural Science Foundation of China under Grant Nos. 11711530203 and 11771443, and the Fundamental Research Funds for the Central Universities under Grant No. 2015XKMS076

Fixed-point theorems for families of weakly non-expansive maps

Science.gov (United States)

Mai, Jie-Hua; Liu, Xin-He

2007-10-01

In this paper, we present some fixed-point theorems for families of weakly non-expansive maps under some relatively weaker and more general conditions. Our results generalize and improve several results due to Jungck [G. Jungck, Fixed points via a generalized local commutativity, Int. J. Math. Math. Sci. 25 (8) (2001) 497-507], Jachymski [J. Jachymski, A generalization of the theorem by Rhoades and Watson for contractive type mappings, Math. Japon. 38 (6) (1993) 1095-1102], Guo [C. Guo, An extension of fixed point theorem of Krasnoselski, Chinese J. Math. (P.O.C.) 21 (1) (1993) 13-20], Rhoades [B.E. Rhoades, A comparison of various definitions of contractive mappings, Trans. Amer. Math. Soc. 226 (1977) 257-290], and others.

47 CFR 22.603 - 488-494 MHz fixed service in Hawaii.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false 488-494 MHz fixed service in Hawaii. 22.603 Section 22.603 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES... fixed service in Hawaii. Before filing applications for authorization of inter-island control and/or...

48 CFR 16.205 - Fixed-price contracts with prospective price redetermination.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Fixed-price contracts with prospective price redetermination. 16.205 Section 16.205 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 16.205...

Study on AE in Mechanical Seal Lift-off Recognition of Mechanical Main Shaft

Directory of Open Access Journals (Sweden)

Erqing Zhang

2014-06-01

Full Text Available For the problem of the determination of lift-off position and the measurement of end face thickness for mechanical seal more difficult, the method based on acoustic emission signal end face lift-off condition monitoring technology for mechanical seal was proposed. The electric eddy current sensor made direct measurement in the internal of mechanical seal device, and the acoustic emission sensor was fixed in the outside for indirect measurement. The acoustic emission signals were de-noised by wavelet threshold de-noising method. The representative energy features were selected by wavelet packet energy spectrum algorithm. It was established that the Radial Basis Function neural network model used for identification of the mechanical seal lift-off position, and the extracted wavelet energy features as its input. It was confirmed accurate and effective that the acoustic emission identification technology through comparing with the data detected by electric eddy current sensor. So using the acoustic emission technology realized the identification of the mechanical seal lift-off position of mechanical main shaft from inside to outside. It is convenient to be used and promotion in industrial field.

Effect of polyester fiber reinforcement on the mechanical properties of interim fixed partial dentures

Directory of Open Access Journals (Sweden)

N. Gopichander

2015-10-01

Conclusion: Within the limitations of this study, polyester fiber reinforcements improved the mechanical properties of heat-polymerized PMMA, cold-polymerized PMMA, and bis-acrylic provisional FPD materials.

The effects of matrix inhomogeneities on the cellular mechanical environment in tissue-engineered cartilage : an in silico investigation

NARCIS (Netherlands)

Khoshgoftar, M.; Wilson, W.; Ito, K.; Donkelaar, van C.C.

2014-01-01

Mechanical stimulation during cartilage tissue-engineering (TE) enhances extracellular matrix (ECM) synthesis and thereby improves the mechanical properties of TE cartilage. Generally, these mechanical stimuli are of a fixed magnitude. However, as a result of ECM synthesis and spatial variations

The effects of matrix inhomogeneities on the cellular mechanical environment in tissue-engineered cartilage: an in silico investigation

NARCIS (Netherlands)

Khoshgoftar, M.; Wilson, W.; Ito, K.; Donkelaar, C.C. van

2014-01-01

Mechanical stimulation during cartilage tissue-engineering enhances extracellular matrix (ECM) synthesis and thereby improves the mechanical properties of tissue engineered (TE) cartilage. Generally, these mechanical stimuli are of a fixed magnitude. However, as a result of ECM synthesis and spatial

The Metal-Zirconia Implant Fixed Hybrid Full-Arch Prosthesis: An Alternative Technique for Fabrication.

Science.gov (United States)

Stumpel, Lambert J; Haechler, Walter

2018-03-01

The metal-resin hybrid full-arch prosthesis has been a traditionally used type of restoration for full-arch implant fixed dentures. A newer development has centered around the use of monolithic zirconia or zirconia veneered with porcelain. Being a ceramic, zirconia has the potential for fracture. This article describes a technique that utilizes a metal substructure to support a chemically and mechanically resinbonded shell of zirconia. The workflow is discussed, ranging from in-office master cast fabrication to the CAD/ CAM production of the provisional and the definitive metal-zirconia prosthesis. The article also highlights the advantages and disadvantages of various materials used for hybrid prostheses.

Mechanisms of thermal induced gallium removal (TIGR) from plutonium dioxide. Revision 1

International Nuclear Information System (INIS)

DeMuth, S.F.

1998-01-01

This study was initiated in order to determine the advantages of using a mixed-bed rather than a fixed-bed reactor (i.e. furnace) for separation of gallium from PuO 2 by the Thermal Induced Gallium Removal (TIGR) process. The TIGR process is based upon vaporization of gallium suboxide (Ga 2 O). from essentially nonvolatile PuO 2 . The gallium suboxide is formed by passing a reducing gas (i.e. hydrogen) over the PuO 2 particles. Several mechanisms are involved in the reduction and convective vaporization of the gallium suboxide. If the mass transfer of the gallium suboxide across the solid to gas interface significantly affects the processing time, it may be advantageous to use a mixed-bed reactor rather than a fixed-bed reactor. However, due to the difficulty of handling PuO 2 powder, a mixed-bed reactor should be used only if significant advantages can be demonstrated. Based on available data, the results of this study provide strong evidence that a mixed-bed reactor (i.e. furnace) would provide little advantage over a fixed-bed reactor. This is due to the conclusion that the mechanism of internal gallium diffusion within the particle has the predominant affect on the processing time. This is an important conclusion since the use of a mixed-bed would require development of more complex hardware than for a fixed-bed

FixO3 project results, legacy and module migration to EMSO

Science.gov (United States)

Lampitt, Richard

2017-04-01

The fixed point open ocean observatory network (FixO3) project is an international project aimed at integrating in a single network all fixed point open ocean observatories operated by European organisations and to harmonise and coordinate technological, procedural and data management across the stations. The project is running for four years since September 2013 with 29 partners across Europe and a budget of 7M Euros and is now coming to its final phase. In contrast to several past programmes, the opportunity has arisen to ensure that many of the project achievements can migrate into the newly formed European Multidisciplinary Seafloor and water column Observatory (EMSO) research infrastructure. The final phase of the project will focus on developing a strategy to transfer the results in an efficient way to maintain their relevance and maximise their use. In this presentation, we will highlight the significant achievements of FixO3 over the past three years focussing on the modules which will be transferred to EMSO in the coming 9 months. These include: 1. Handbook of best practices for operating fixed point observatories 2. Metadata catalogue 3. Earth Virtual Observatory (EarthVO) for data visualisation and comparison 4. Open Ocean Observatory Yellow Pages (O3YP) 5. Training material for hardware, data and data products used

78 FR 18527 - Implementation of Competitive Bidding for Commercial Broadcast and Instructional Television Fixed...

Science.gov (United States)

2013-03-27

... Broadcast and Instructional Television Fixed Service Licenses AGENCY: Federal Communications Commission... Implementation of Competitive Bidding for Commercial Broadcast and Instructional Television Fixed Service... for Commercial Broadcast and Instructional Television Fixed Service Licenses, MM Docket No. 97- 234 et...

Duan's fixed point theorem: proof and generalization

Directory of Open Access Journals (Sweden)

2006-01-01

Full Text Available Let X be an H-space of the homotopy type of a connected, finite CW-complex, f:X→X any map and p k :X→X the k th power map. Duan proved that p k f :X→X has a fixed point if k≥2 . We give a new, short and elementary proof of this. We then use rational homotopy to generalize to spaces X whose rational cohomology is the tensor product of an exterior algebra on odd dimensional generators with the tensor product of truncated polynomial algebras on even dimensional generators. The role of the power map is played by a θ -structure μ θ :X→X as defined by Hemmi-Morisugi-Ooshima. The conclusion is that μ θ f and f μ θ each has a fixed point.

47 CFR 90.1331 - Restrictions on the operation of base and fixed stations.

Science.gov (United States)

2010-10-01

...-3700 MHz Band § 90.1331 Restrictions on the operation of base and fixed stations. (a)(1) Except as provided in paragraph (a)(2) of this section, base and fixed stations may not be located within 150 km of... these stations are available at http://www.fcc.gov/ib/sd/3650/. (2) Base and fixed stations may be...

A methodology for quantitatively managing the bug fixing process using Mahalanobis Taguchi system

Directory of Open Access Journals (Sweden)

Boby John

2015-12-01

Full Text Available The controlling of bug fixing process during the system testing phase of software development life cycle is very important for fixing all the detected bugs within the scheduled time. The presence of open bugs often delays the release of the software or result in releasing the software with compromised functionalities. These can lead to customer dissatisfaction, cost overrun and eventually the loss of market share. In this paper, the authors propose a methodology to quantitatively manage the bug fixing process during system testing. The proposed methodology identifies the critical milestones in the system testing phase which differentiates the successful projects from the unsuccessful ones using Mahalanobis Taguchi system. Then a model is developed to predict whether a project is successful or not with the bug fix progress at critical milestones as control factors. Finally the model is used to control the bug fixing process. It is found that the performance of the proposed methodology using Mahalanobis Taguchi system is superior to the models developed using other multi-dimensional pattern recognition techniques. The proposed methodology also reduces the number of control points providing the managers with more options and flexibility to utilize the bug fixing resources across system testing phase. Moreover the methodology allows the mangers to carry out mid- course corrections to bring the bug fixing process back on track so that all the detected bugs can be fixed on time. The methodology is validated with eight new projects and the results are very encouraging.

CARBON FIXING CAPACITY OF AMAZONIAN SOILS IN RELATION TO ITS DEGRADATION CONDITIONS

OpenAIRE

Clara Patricia Peña Venegas; Edmundo Rafael Mendoza Olmos; Carlos Hernando Rodríguez León; Gladys Inés Cardona Vanegas; Bernardo Eusebio Betancurt Parra; Maolenmarx Tatiana Garzón Gómez

2015-01-01

Amazonian deforestation and transformation alert about their effects worldwide. One concern is the increase of the Carbon (C) levels emitted. Previous works have estimated the fixed C in Amazon forests without including the C stored in soils. Within soil, the organic carbon molecules are highly sensitive to degradation, affecting the natural capacity of soils to fix and store C. The present study evaluates the impact of degradation in the natural capacity of Amazon soils to fix C. Thirty five...

Limb Amputations in Fixed Dystonia: A Form of Body Integrity Identity Disorder?

OpenAIRE

Edwards, Mark J; Alonso-Canovas, Araceli; Schrag, Arnette; Bloem, Bastiaan R; Thompson, Philip D; Bhatia, Kailash

2011-01-01

Fixed dystonia is a disabling disorder mainly affecting young women who develop fixed abnormal limb postures and pain after apparently minor peripheral injury. There is continued debate regarding its pathophysiology and management. We report 5 cases of fixed dystonia in patients who sought amputation of the affected limb. We place these cases in the context of previous reports of patients with healthy limbs and patients with chronic regional pain syndrome who have sought amputation. Our cases...

Fixed-Guideway Transit Lines (National) - National Geospatial Data Asset (NGDA) Transit (Lines)

Data.gov (United States)

Department of Transportation — Version 2004 of the Fixed-Guideway Transit Network is a network database of the nation's fixed-guideway transit systems (NTAD). The data set covers systems in cities...

Fixed-Guideway Transit Stations (National) - National Geospatial Data Asset (NGDA) Transit (Stations)

Data.gov (United States)

Department of Transportation — Version 2004 of the Fixed-Guideway Transit Network is a network database of the nation's fixed-guideway transit systems (NTAD). The data set covers systems in cities...

Raman imaging using fixed bandpass filter

Science.gov (United States)

Landström, L.; Kullander, F.; Lundén, H.; Wästerby, P.

2017-05-01

By using fixed narrow band pass optical filtering and scanning the laser excitation wavelength, hyperspectral Raman imaging could be achieved. Experimental, proof-of-principle results from the Chemical Warfare Agent (CWA) tabun (GA) as well as the common CWA simulant tributyl phosphate (TBP) on different surfaces/substrates are presented and discussed.

Inherent limitations of fixed-time, servo-controlled radiometric calorimetry

International Nuclear Information System (INIS)

Wetzel, J.R.; Lemming, J.F.; Duff, M.F.

1987-01-01

Interest has been shown in using fixed-time, servo-controlled calorimetry to shorten the measurement times for certain samples that require low precision values (3 to 5%). This type of calorimeter measurement could be particularly useful for screening scrap samples to determine whether there is a need for a more accurate measurement or for certain confirmatory measurements for which low precision numbers are sufficient. The equipment required for this type of measurement is a servo-controlled calorimeter and a preconditioning unit. Samples to be measured are placed in the preconditioning unit, which is maintained at the internal temperature of the calorimeter. The power value for the sample is determined at a fixed time after loading into the calorimeter, for example, 30 min. When a calorimeter is operated using a fixed cutoff time, there are additional sources of uncertainty that need to be considered. The major factors affecting the uncertainty of the calorimetry power values are discussed. 2 refs., 4 figs

48 CFR 16.403-1 - Fixed-price incentive (firm target) contracts.

Science.gov (United States)

2010-10-01

... (firm target) contracts. 16.403-1 Section 16.403-1 Federal Acquisition Regulations System FEDERAL... Fixed-price incentive (firm target) contracts. (a) Description. A fixed-price incentive (firm target... incentive (firm target) contract is appropriate when the parties can negotiate at the outset a firm target...

48 CFR 1416.203 - Fixed-price contracts with economic price adjustment.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Fixed-price contracts with economic price adjustment. 1416.203 Section 1416.203 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Fixed-Price Contracts 1416.203...

STUDY OF GAS SEPARATION PROCESS BY DYNAMIC ADSORPTION IN FIXED BED

Directory of Open Access Journals (Sweden)

Ioan Solomon

2010-10-01

Full Text Available An experimental study of mass transfer at gas separation by dynamic adsorption in fixed bed of impregnated silica gel is presented in this work. By means of a mathematical model based on constants and coefficient easy to evaluate, the distributions of adsorbate concentration in gas and solid phases were determined as a function of time and throughout the height of the fixed bed, under isothermal conditions.With this aim, water vapors from air were adsorbed in a fixed bed of impregnated silica gel. The values of the volumetric mass transfer coefficient, Kv, were determined experimentally at several values of air superficial velocity, an air relative humidity of 69�20at 38 °C. The influence of the gas flow velocity and initial water concentration in adsorbent on the distribution of water concentration in both phases was established as a function of time and throughout the height of the fixed bed. The results obtained allow one to determination of the local adsorption rate.

Main Ring bunch spreaders: Past, 1987/1988 fixed target run, and proposed future

International Nuclear Information System (INIS)

Jackson, G.P.

1989-01-01

During the last 1987--1988 fixed target running period beam intensity was limited many times by coherent instabilities in both the Main Ring and in the Tevatron. The intensity thresholds for instabilities are generally inversely proportional to the proton bunch length. Since fixed target operations are insensitive to the longitudinal phase space emittance of the beam, bunch spreaders are employed to increase this emittance, and hence the bunch length. As a result, more beam intensity can be delivered to the fixed target experiments. This paper starts with a short history behind the old Main Ring bunch spreader. After discussing the physics of stimulated emittance growth, the design and performance of the 1987--1988 fixed target run Main Ring bunch spreader is discussed. Finally, designs of improved Main Ring and Tevatron bunch spreaders for the next fixed target run are proposed. 23 figs

Development of the neurocranium after transsutural fixing by new, resorbable poly-L-lactide miniplates. A comparison to fixing with the common titanium miniplates.

Science.gov (United States)

Antikainen, T; Pernu, H; Törmälä, P; Kallioinen, M; Waris, T; Serlo, W

1994-01-01

The right coronal sutures of twelve (12) newborn rabbits were fixed with commercially available, self-reinforced poly-L-lactide miniplates, with eight (8) rabbits sham treated with titanium miniplate fixation as reference experiments, in order to demonstrate the possible effects on skull growth. After six (6) months follow-up, both types of plate were detected to have caused a similar asymmetry in the neurocranium. Therefore, in our opinion, fixing across growing sutures, even with the new biodegradable devices, should be avoided.

Effects of artificial sand fixing on community characteristics of a rare desert shrub.

Science.gov (United States)

Liu, Huiliang; Tao, Ye; Qiu, Dong; Zhang, Daoyuan; Zhang, Yongkuan

2013-10-01

Eremosparton songoricum (Fabaceae) is a rare, native, clonal small shrub of the deserts of central Asia. Although human activities have greatly fragmented the distribution of E. songoricum, it occurs in areas where artificial sand fixing (AS) has been implemented. We sought to explore whether AS promotes survival and growth of E. songoricum. In the Gurbantunggut Desert of northwestern China in June 2010, we established 10 plots in an area where sand fixing occurred (5-10 years previously) and 11 plots on original sand substrate on which some plants had settled without fixing sand. Sand fixing changed soil properties and biological characteristics in sand-fixed plots. The soil surface where sand fixing occurred was covered by algal crusts and some lichen, but not bare sand (BS). Soil nutrients; water content of deep soil (30-150 cm); overall plant and herbaceous species richness, diversity, abundance, and cover; above- and belowground biomass; and cover, biomass, and height of E. songoricum in the sand-fixed plots were significantly greater than in plots of BS. However, distribution of E. songoricum individuals in the 2 types of plots did not differ. Our results indicate AS may enhance survival of E. songoricum and increase the overall diversity and stability of the desert plant community. We suggest AS as a way to protect this rare desert plant in situ. © 2013 Society for Conservation Biology.

Tramadol/Paracetamol Fixed-Dose Combination for Chronic Pain Management in Family Practice: A Clinical Review

Science.gov (United States)

Morón Merchante, Ignacio; Pergolizzi, Joseph V.; van de Laar, Mart; Mellinghoff, Hans-Ulrich; O'Brien, Joanne; Perrot, Serge; Raffa, Robert B.

2013-01-01

The family practitioner plays an important role in the prevention, diagnosis, and early management of chronic pain. He/she is generally the first to be consulted, the one most familiar with the patients and their medical history, and is likely the first to be alerted in case of inadequate pain control or safety and tolerability issues. The family practitioner should therefore be at the center of the multidisciplinary team involved in a patient's pain management. The most frequent indications associated with chronic pain in family practice are of musculoskeletal origin, and the pain is often multimechanistic. Fixed-dose combination analgesics combine compounds with different mechanisms of action; their broader analgesic spectrum and potentially synergistic analgesic efficacy and improved benefit/risk ratio might thus be useful. A pain specialist meeting held in November 2010 agreed that the fixed-dose combination tramadol/paracetamol might be a useful pharmacological option for chronic pain management in family practice. The combination is effective in a variety of pain conditions with generally good tolerability. Particularly in elderly patients, it might be considered as an alternative to conventional analgesics such as NSAIDs, which should be used rarely with caution in this population. PMID:24959571

48 CFR 52.249-9 - Default (Fixed-Price Research and Development).

Science.gov (United States)

2010-10-01

... Research and Development). 52.249-9 Section 52.249-9 Federal Acquisition Regulations System FEDERAL... Provisions and Clauses 52.249-9 Default (Fixed-Price Research and Development). As prescribed in 49.504(b), insert the following clause: Default (Fixed-Price Research and Development) (APR 1984) (a)(1) The...

Inhibition of nitrogen-fixing activity of the cyanobiont affects the localization of glutamine synthetase in hair cells of Azolla.

Science.gov (United States)

Uheda, Eiji; Maejima, Kazuhiro

2009-10-15

In the Azolla-Anabaena association, the host plant Azolla efficiently incorporates and assimilates ammonium ions that are released from the nitrogen-fixing cyanobiont, probably via glutamine synthetase (GS; EC 6.3.1.2) in hair cells, which are specialized cells protruding into the leaf cavity. In order to clarify the regulatory mechanism underlying ammonium assimilation in the Azolla-Anabaena association, Azolla plants were grown under an argon environment (Ar), in which the nitrogen-fixing activity of the cyanobiont was inhibited specifically and completely. The localization of GS in hair cells was determined by immunoelectron microscopy and quantitative analysis of immunogold labeling. Azolla plants grew healthily under Ar when nitrogen sources, such as NO(3)(-) and NH(4)(+), were provided in the growth medium. Both the number of cyanobacterial cells per leaf and the heterocyst frequency of the plants under Ar were similar to those of plants in a nitrogen environment (N(2)). In hair cells of plants grown under Ar, regardless of the type of nitrogen source provided, only weak labeling of GS was observed in the cytoplasm and in chloroplasts. In contrast, in hair cells of plants grown under N(2), abundant labeling of GS was observed in both sites. These findings indicate that specific inhibition of the nitrogen-fixing activity of the cyanobiont affects the localization of GS isoenzymes. Ammonium fixed and released by the cyanobiont could stimulate GS synthesis in hair cells. Simultaneously, the abundant GS, probably GS1, in these cells, could assimilate ammonium rapidly.

Radioisotope licence application: Fixed nuclear gauges

International Nuclear Information System (INIS)

1995-09-01

This guide will assist you in completing and filing an application for a new licence or licence renewal for fixed nuclear gauges in accordance with the Atomic Energy Control Regulations and radioisotope licensing policies. It also provides some of the background information that you will require in order to safely use radioactive materials

Evaluation of metal-polymeric fixed partial prosthesis using optical coherence tomography

Science.gov (United States)

Sinescu, C.; Negrutiu, M. L.; Duma, V. F.; Marcauteanu, C.; Topala, F. I.; Rominu, M.; Bradu, A.; Podoleanu, A. Gh.

2013-11-01

Metal-Polymeric fixed partial prosthesis is the usual prosthetic treatment for many dental patients. However, during the mastication the polymeric component of the prosthesis is fractured and will be lost. This fracture is caused by the material defects or by the fracture lines trapped inside the esthetic components of the prosthesis. This will finally lead to the failure of the prosthetic treatment. Nowadays, there is no method of identification and forecast for the materials defects of the polymeric materials. The aim of this paper is to demonstrate the capability of Optical Coherence Tomography (OCT) as a non-invasive clinical method that can be used for the evaluation of metal-polymeric fixed partial prostheses. Twenty metal-polymeric fixed partial prostheses were used for this study. The esthetic component of the prostheses has been Adoro (Ivoclar). Optical investigations of the metal prostheses have revealed no material defects or fracture lines. All the prostheses were temporary cemented in the oral cavities of the patients for six month. The non-invasive method used for the investigations was OCT working in Time Domain mode at 1300 nm. The evaluations of the prostheses were performed before and after their cementation in the patient mouths. All the imagistic results were performed in 2D and than in 3D, after the reconstruction. The results obtained after the OCT evaluation allowed for the identification of 4 metal-polymeric fixed partial prostheses with material defects immediately after finishing the technological procedures. After 6 month in the oral environment other 3 fixed partial prostheses revealed fracture lines. In conclusion, OCT proved to be a valuable tool for the noninvasive evaluation of the metal-polymeric fixed partial prostheses.