WorldWideScience

Sample records for fibrous composite sandwich

  1. Strength of Fibrous Composites

    CERN Document Server

    Huang, Zheng-Ming

    2012-01-01

    "Strength of Fibrous Composites" addresses evaluation of the strength of a fibrous composite by using its constituent material properties and its fiber architecture parameters. Having gone through the book, a reader is able to predict the progressive failure behavior and ultimate strength of a fibrous laminate subjected to an arbitrary load condition in terms of the constituent fiber and matrix properties, as well as fiber geometric parameters. The book is useful to researchers and engineers working on design and analysis for composite materials. Dr. Zheng-Ming Huang is a professor at the School of Aerospace Engineering & Applied Mechanics, Tongji University, China. Mr. Ye-Xin Zhou is a PhD candidate at the Department of Mechanical Engineering, the University of Hong Kong, China.

  2. Sandwiched composites in aerospace engineering

    OpenAIRE

    Nunes, J. P.; Silva,J.F.

    2016-01-01

    This chapter considers sandwiched composites used in aerospace applications. Typical sandwich composites consist of two thin, stiff, high-strength facing skins separated by a thick and light core. New developments in the type of face and core materials, production methods and joining and repair techniques are discussed in this chapter. It also discusses various properties as well as their main design methods for existing and future applications of sandwiched composites.

  3. Creep of fibrous composite materials

    DEFF Research Database (Denmark)

    Lilholt, Hans

    1985-01-01

    Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions to the cr......Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions...... such as Ni + W-fibres, high temperature materials such as Ni + Ni3Al + Cr3C2-fibres, and medium temperature materials such as Al + SiC-fibres. For the first two systems reasonable consistency is found for the models and the experiments, while for the third system too many unquantified parameters exist...

  4. Fracture of sandwiched composites

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Weh-Huei.

    1989-01-01

    Fracture of a pair of collinear cracks in various materials, such as an isotropic strip, an orthotropic strip, a bonded isotropic adhesive layer, and sandwiched orthotropic layers, is investigated. The crack surfaces are subjected to an arbitrary opening pressure p(x). The problems are formulated in terms of Fredholm integral equation of the second kind by making use the techniques of Fourier transform and finite Hilbert transform. In case of uniform opening pressure p(x)={sigma}, exact expressions for the stress intensity factors and the shape of deformed crack are obtained. Numerical calculations are carried out to study the effects of various boundary geometries and material properties on the fracture of the chosen materials.

  5. Fibrous-Ceramic/Aerogel Composite Insulating Tiles

    Science.gov (United States)

    White, Susan M.; Rasky, Daniel J.

    2004-01-01

    Fibrous-ceramic/aerogel composite tiles have been invented to afford combinations of thermal-insulation and mechanical properties superior to those attainable by making tiles of fibrous ceramics alone or aerogels alone. These lightweight tiles can be tailored to a variety of applications that range from insulating cryogenic tanks to protecting spacecraft against re-entry heating. The advantages and disadvantages of fibrous ceramics and aerogels can be summarized as follows: Tiles made of ceramic fibers are known for mechanical strength, toughness, and machinability. Fibrous ceramic tiles are highly effective as thermal insulators in a vacuum. However, undesirably, the porosity of these materials makes them permeable by gases, so that in the presence of air or other gases, convection and gas-phase conduction contribute to the effective thermal conductivity of the tiles. Other disadvantages of the porosity and permeability of fibrous ceramic tiles arise because gases (e.g., water vapor or cryogenic gases) can condense in pores. This condensation contributes to weight, and in the case of cryogenic systems, the heat of condensation undesirably adds to the heat flowing to the objects that one seeks to keep cold. Moreover, there is a risk of explosion associated with vaporization of previously condensed gas upon reheating. Aerogels offer low permeability, low density, and low thermal conductivity, but are mechanically fragile. The basic idea of the present invention is to exploit the best features of fibrous ceramic tiles and aerogels. In a composite tile according to the invention, the fibrous ceramic serves as a matrix that mechanically supports the aerogel, while the aerogel serves as a low-conductivity, low-permeability filling that closes what would otherwise be the open pores of the fibrous ceramic. Because the aerogel eliminates or at least suppresses permeation by gas, gas-phase conduction, and convection, the thermal conductivity of such a composite even at

  6. Local slamming impact of sandwich composite hulls

    National Research Council Canada - National Science Library

    Qin, Z; Batra, R.C

    2009-01-01

    We develop a hydroelastic model based on a {3,2}-order sandwich composite panel theory and Wagner's water impact theory for investigating the fluid-structure interaction during the slamming process...

  7. Composite Sandwich Technologies Lighten Components

    Science.gov (United States)

    2010-01-01

    Leveraging its private resources with several Small Business Innovation Research (SBIR) contracts with both NASA and the U.S. Department of Defense, WebCore Technologies LLC, of Miamisburg, Ohio, developed a fiber-reinforced foam sandwich panel it calls TYCOR that can be used for a wide variety of industrial and consumer applications. Testing at Glenn Research Center?s Ballistic Impact Facility demonstrated that the technology was able to exhibit excellent damage localization and stiffness during impact. The patented and trademarked material has found use in many demanding applications, including marine, ground transportation, mobile shelters, bridges, and most notably, wind turbines.

  8. Self-healing sandwich composite structures

    Science.gov (United States)

    Fugon, D.; Chen, C.; Peters, K.

    2012-04-01

    Previous research demonstrated that a thin self-healing layer is effective in recovering partial sandwich composite performance after an impact event. Many studies have been conducted that show the possibility of using Fiber Bragg Grating (FBG) sensors to monitor the cure of a resin through strain and temperature monitoring. For this experiment, FBG sensors were used to monitor the curing process of a self-healing layer within a twelve-layer fiberglass laminate after impact. First, five self-healing sandwich composite specimens were manufactured. FBG sensors were embedded between the fiberglass and foam core. Then the fiberglass laminate was impacted with the use of a drop tower and the curing process was monitored. The collected data was used to compare the cure of the resin and fiberglass alone to the cure of the resin from a self-healing specimen. For the low viscosity resin system tested, these changes were not sufficiently large to identify different polymerization states in the resin as it cured. These results indicate that applying different resin systems might increase the efficiency of the self-healing in the sandwich composites.

  9. Failure modes of composite sandwich beams

    Directory of Open Access Journals (Sweden)

    Gdoutos E.

    2008-01-01

    Full Text Available A thorough investigation of failure behavior of composite sandwich beams under three-and four-point bending was undertaken. The beams were made of unidirectional carbon/epoxy facings and a PVC closed-cell foam core. The constituent materials were fully characterized and in the case of the foam core, failure envelopes were developed for general two-dimensional states of stress. Various failure modes including facing wrinkling, indentation failure and core failure were observed and compared with analytical predictions. The initiation, propagation and interaction of failure modes depend on the type of loading, constituent material properties and geometrical dimensions.

  10. Dynamic Failure of Composite and Sandwich Structures

    CERN Document Server

    Abrate, Serge; Rajapakse, Yapa D S

    2013-01-01

    This book presents a broad view of the current state of the art regarding the dynamic response of composite and sandwich structures subjected to impacts and explosions. Each chapter combines a thorough assessment of the literature with original contributions made by the authors.  The first section deals with fluid-structure interactions in marine structures.  The first chapter focuses on hull slamming and particularly cases in which the deformation of the structure affects the motion of the fluid during the water entry of flexible hulls. Chapter 2 presents an extensive series of tests underwater and in the air to determine the effects of explosions on composite and sandwich structures.  Full-scale structures were subjected to significant explosive charges, and such results are extremely rare in the open literature.  Chapter 3 describes a simple geometrical theory of diffraction for describing the interaction of an underwater blast wave with submerged structures. The second section addresses the problem of...

  11. Structural and failure mechanics of sandwich composites

    CERN Document Server

    Carlsson, LA; Carlsson, Leif A

    2011-01-01

    Focusing on important deformation and failure modes of sandwich structures, this volume describes the mechanics behind fracture processes. The text also reviews test methods developed for the cr, structural integrity, and failure mechanisms of sandwich structures.

  12. Optimization of sandwich composites fuselages under flight loads

    NARCIS (Netherlands)

    Yan, C.; Bergsma, O.; Koussios, S.; Zu, L.; Beukers, A.

    2010-01-01

    The sandwich composites fuselages appear to be a promising choice for the future aircrafts because of their structural efficiency and functional integration advantages. However, the design of sandwich composites is more complex than other structures because of many involved variables. In this paper,

  13. Imitation model of destruction of aviation fibrous polymeric composite materials

    Directory of Open Access Journals (Sweden)

    В. М. Синеглазов

    2000-12-01

    Full Text Available Considered are models imitating influence of lighting on dielectric construction materials with elements of lighting protection. Described are models of current spreading in multilayer materials and thermal destruction of fibrous polymeric composite materials caused by lighting current flowing on such materials

  14. Fibrous and textile materials for composite applications

    CERN Document Server

    Fangueiro, Raul

    2016-01-01

    This book focuses on the fibers and textiles used in composite materials. It presents both existing technologies currently used in commercial applications and the latest advanced research and developments. It also discusses the different fiber forms and architectures, such as short fibers, unidirectional tows, directionally oriented structures or advanced 2D- and 3D-textile structures that are used in composite materials. In addition, it examines various synthetic, natural and metallic fibers that are used to reinforce polymeric, cementitious and metallic matrices, as well as fiber properties, special functionalities, manufacturing processes, and composite processing and properties. Two entire chapters are dedicated to advanced nanofiber and nanotube reinforced composite materials. The book goes on to highlight different surface treatments and finishes that are applied to improve fiber/matrix interfaces and other essential composite properties. Although a great deal of information about fibers and textile str...

  15. Mechanical and vibro-acoustic aspects of composite sandwich cylinders

    NARCIS (Netherlands)

    Yuan, C.

    2013-01-01

    Designing a fuselage involves many considerations such as strength and stability, fatigue, damage tolerance, fire and lightning resistance, thermal and acoustic insulation, production, inspection, maintenance and repair. In the background of the application of composite sandwich structures on the ai

  16. Mechanical and vibro-acoustic aspects of composite sandwich cylinders

    NARCIS (Netherlands)

    Yuan, C.

    2013-01-01

    Designing a fuselage involves many considerations such as strength and stability, fatigue, damage tolerance, fire and lightning resistance, thermal and acoustic insulation, production, inspection, maintenance and repair. In the background of the application of composite sandwich structures on the ai

  17. Mechanical and vibro-acoustic aspects of composite sandwich cylinders

    NARCIS (Netherlands)

    Yuan, C.

    2013-01-01

    Designing a fuselage involves many considerations such as strength and stability, fatigue, damage tolerance, fire and lightning resistance, thermal and acoustic insulation, production, inspection, maintenance and repair. In the background of the application of composite sandwich structures on the

  18. Fiber-Reinforced-Foam (FRF) Core Composite Sandwich Panel Concept for Advanced Composites Technologi

    Science.gov (United States)

    2010-01-01

    Fiber-Reinforced-Foam (FRF) Core Composite Sandwich Panel Concept for Advanced Composites Technologies Project - Preliminary Manufacturing Demonstration Articles for Ares V Payload Shroud Barrel Acreage Structure

  19. Optimization of composite sandwich cover panels subjected to compressive loadings

    Science.gov (United States)

    Cruz, Juan R.

    1991-01-01

    An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).

  20. Study on voids of epoxy matrix composites sandwich structure parts

    Science.gov (United States)

    He, Simin; Wen, Youyi; Yu, Wenjun; Liu, Hong; Yue, Cheng; Bao, Jing

    2017-03-01

    Void is the most common tiny defect of composite materials. Porosity is closely related to composite structure property. The voids forming behaviour in the composites sandwich structural parts with the carbon fiber reinforced epoxy resin skins was researched by adjusting the manufacturing process parameters. The composites laminate with different porosities were prepared with the different process parameter. The ultrasonic non-destructive measurement method for the porosity was developed and verified through microscopic examination. The analysis results show that compaction pressure during the manufacturing process had influence on the porosity in the laminate area. Increasing the compaction pressure and compaction time will reduce the porosity of the laminates. The bond-line between honeycomb core and carbon fiber reinforced epoxy resin skins were also analyzed through microscopic examination. The mechanical properties of sandwich structure composites were studied. The optimization process parameters and porosity ultrasonic measurement method for composites sandwich structure have been applied to the production of the composite parts.

  1. Hybrid Ceramic Matrix Fibrous Composites: an Overview

    Energy Technology Data Exchange (ETDEWEB)

    Naslain, R, E-mail: naslain@lcts.u-bordeaux1.fr [University of Bordeaux 3, Allee de La Boetie, 33600 Pessac (France)

    2011-10-29

    Ceramic-Matrix Composites (CMCs) consist of a ceramic fiber architecture in a ceramic matrix, bonded together through a thin interphase. The present contribution is limited to non-oxide CMCs. Their constituents being oxidation-prone, they are protected by external coatings. We state here that CMCs display a hybrid feature, when at least one of their components is not homogeneous from a chemical or microstructural standpoint. Hybrid fiber architectures are used to tailor the mechanical or thermal CMC-properties whereas hybrid interphases, matrices and coatings to improve CMC resistance to aggressive environments.

  2. Fluid Structure Interaction Effect on Sandwich Composite Structures

    Science.gov (United States)

    2011-09-01

    14. SUBJECT TERMS Fluid Structure Interaction, FSI, composite, balsa, low velocity impact, sandwich composites, VARTM , Vacuum Assisted Resin Transfer...11 1. Vacuum Assisted Resin Transfer Molding ( VARTM ) ...................11 2. Procedure...required equipment for VARTM composite production. ..............10 Figure 4. VARTM Lay-up (From [8

  3. X-joints in composite sandwich panels

    NARCIS (Netherlands)

    Vredeveldt, A.W.; Janssen, G.Th.M.

    1998-01-01

    The small structural weight of fast large ships such as fast mono hulls or catamaran type of ships is of extreme importance to their success. One possible light weight structural solution is the sandwich panel with fibre reinforced laminates and a balsa, honeycomb or foam core. A severe obstacle for

  4. X-joints in composite sandwich panels

    NARCIS (Netherlands)

    Vredeveldt, A.W.; Janssen, G.Th.M.

    1998-01-01

    The small structural weight of fast large ships such as fast mono hulls or catamaran type of ships is of extreme importance to their success. One possible light weight structural solution is the sandwich panel with fibre reinforced laminates and a balsa, honeycomb or foam core. A severe obstacle for

  5. Vibration analysis and optimization of sandwich composite with curvilinear fibers

    Science.gov (United States)

    Honda, S.; Narita, Y.

    2016-09-01

    The present paper develops a shell element based on the refined zigzag theory (RZT) and applies it to the vibration analysis and optimization problem of the composite sandwich plate composed of CFRP skins and soft-cores. The RZT accepts large differences in layer stiffness, and requires less calculation effort than the layer-wise or three-dimensional theories. Numerical results revealed that the present method predicts vibration characteristics of composite sandwich plates with soft-core accurately. Then, shapes of reinforcing fibers in CFRP composite skins are optimized to maximize fundamental frequencies. As an optimizer, the particle swarm optimization (PSO) approach is employed since curvilinear fiber shapes are defined by continuous design variables. Obtained results showed that the composite sandwich with optimum curvilinear fiber shapes indicates higher fundamental frequencies compared with straight fibers.

  6. Enhancing Fatigue Performance of Sandwich Composites with Nanophased Core

    Directory of Open Access Journals (Sweden)

    S. Zainuddin

    2010-01-01

    Full Text Available We report fatigue performance of sandwich composites with nanophased core under shear load. Nanophased core was made from polyurethane foam dispersed with carbon nanofiber (CNF. CNFs were dispersed into part-A of liquid polyurethane through a sonication process and the loading of nanoparticles was 1.0 wt%. After dispersion, part-A was mixed with part-B, cast into a mold, and allowed to cure. Nanophased foam was then used to fabricate sandwich composites. Static shear tests revealed that strength and modulus of nanophased foams were 33% and 19% higher than those of unreinforced (neat foams. Next, shear fatigue tests were conducted at a frequency of 3 Hz and stress ratio (R of 0.1. S-N curves were generated and fatigue performances were compared. Number of cycles to failure for nanophased sandwich was significantly higher than that of the neat ones. For example, at 57% of ultimate shear strength, nanophased sandwich would survive 400,000 cycles more than its neat counterpart. SEM micrographs indicated stronger cell structures with nanophased foams. These stronger cells strengthened the sub-interface zones underneath the actual core-skin interface. High toughness of the sub-interface layer delayed initiation of fatigue cracks and thereby increased the fatigue life of nanophased sandwich composites.

  7. Natural fabric sandwich laminate composites: development and investigation

    Indian Academy of Sciences (India)

    C K ARVINDA PANDIAN; H SIDDHI JAILANI; A RAJADURAI

    2017-02-01

    In this work, eco-friendly natural fabric sandwich laminate (NFSL) composites are formulated using jute and linen-fabric-reinforced epoxy with different layer ratios (5:0, 4:1, 3:2, 2:3, 1:4 and 0:5) by hand layup system. Different mechanical attributes (tensile, flexural and impact) of the NFSL composites are quantified. Thermal stability and water absorption behaviour of the NFSL composites are also assessed. A scanning electron microscope (SEM) and optical microscope are used for qualitative analysis of NFSL composites’ interfacial properties. Two layers of jute and three layers of linen sandwich laminate have registered peak values in tensile and impact properties. The five layers of linen laminate composite have exhibited high flexural strength, been proven to have good thermal stability and furthermore shown better water absorption behaviour than any other laminate composites.

  8. Stiff, Strong Splice For A Composite Sandwich Structure

    Science.gov (United States)

    Schmaling, D.

    1991-01-01

    New type of splice for composite sandwich structure reduces peak shear stress in structure. Layers of alternating fiber orientation interposed between thin ears in adhesive joint. Developed for structural joint in spar of helicopter rotor blade, increases precision of control over thickness of adhesive at joint. Joint easy to make, requires no additional pieces, and adds little weight.

  9. Low-Velocity Impact on Composite Sandwich Plates

    Science.gov (United States)

    1996-07-01

    plate and correct for this error. 3.4 One- and Two-Degree of Freedom Models A single degree of freedom system (figure 3-3a) was used by Caprino et al...Composite Materials, Vol. 26, No. 10: 1523-1535 (1992). 211) Caprino , G., and Teti, R. "Impact and post-impact behavior of foam core sandwich

  10. A Study of Failure Criteria of Fibrous Composite Materials

    Science.gov (United States)

    Paris, Federico; Jackson, Karen E. (Technical Monitor)

    2001-01-01

    The research described in this paper is focused on two areas: (1) evaluation of existing composite failure criteria in the nonlinear, explicit transient dynamic finite element code, MSC.Dytran, and (2) exploration of the possibilities for modification of material and failure models to account for large deformations, progressive failure, and interaction of damage accumulation with stress/strain response of laminated composites. Following a review of the MSC.Dytran user manual, a bibliographical review of existing failure criteria of composites was performed. The papers considered most interesting for the objective of this report are discussed in section 2. The failure criteria included in the code under consideration are discussed in section 3. A critical summary of the present procedures to perform analysis and design of composites is presented in section 4. A study of the most important historical failure criteria for fibrous composite materials and some of the more recent modifications proposed were studied. The result of this analysis highlighted inadequacies in the existing failure criteria and the need to perform some numerical analyses to elucidate the answer to questions on which some of the proposed criteria are based. A summary of these ideas, which is a proposal of studies to be developed, is presented in section 5. Finally, some ideas for future developments are summarized in section 6.

  11. Resin composites : Sandwich restorations and curing techniques

    OpenAIRE

    Lindberg, Anders

    2005-01-01

    Since the mid-1990s resin composite has been used for Class II restorations in stress-bearing areas as an alternative to amalgam. Reasons for this were the patients’ fear of mercury in dental amalgam and a growing demand for aesthetic restorations. During the last decades, the use of new resin composites with more optimized filler loading have resulted in reduced clinical wear. Improved and simplified amphiphilic bonding systems have been introduced. However, one of the main problems with res...

  12. Composite Materials and Sandwich Structures - A Primer

    Science.gov (United States)

    2010-05-01

    quality and protects prepreg from handling damage. Non - woven unidirectional tapes can otherwise split between fibers. Clean, white lint-free cotton ...applications and S glass fibers are used in strength critical situations. S glass fibers are sometimes woven in composite materials to increase toughness...A woven form of the reinforcements (Figure 1b) is also used in certain cases, depending on the application of the composite. Figure 1a- Fiber

  13. Damage tolerance of a composite sandwich with interleaved foam core

    Science.gov (United States)

    Ishai, Ori; Hiel, Clement

    1992-01-01

    A composite sandwich panel consisting of carbon fiber-reinforced plastic (CFRP) skins and a syntactic foam core was selected as an appropriate structural concept for the design of wind tunnel compressor blades. Interleaving of the core with tough interlayers was done to prevent core cracking and to improve damage tolerance of the sandwich. Simply supported sandwich beam specimens were subjected to low-velocity drop-weight impacts as well as high velocity ballistic impacts. The performance of the interleaved core sandwich panels was characterized by localized skin damage and minor cracking of the core. Residual compressive strength (RCS) of the skin, which was derived from flexural test, shows the expected trend of decreasing with increasing size of the damage, impact energy, and velocity. In the case of skin damage, RCS values of around 50 percent of the virgin interleaved reference were obtained at the upper impact energy range. Based on the similarity between low-velocity and ballistic-impact effects, it was concluded that impact energy is the main variable controlling damage and residual strength, where as velocity plays a minor role.

  14. Comparisons of SHM Sensor Models with Empirical Test Data for Sandwich Composite Structures

    Science.gov (United States)

    2011-09-01

    propagation in a honeycomb sandwich panel was done by Metis Design Inc. in collaboration with ARC NASA . The sandwich panel fabricated for this test...structures. Sandwich type composites are being studied for use in NASAs new heavy lift launch vehicle and flaw detection is crucial for safety and for...and at the Marshall Space Flight Center to examine acoustic wave propagating and the ability to detect intrinsic faults in sandwich type composite

  15. Mechanical Response of All-composite Pyramidal Lattice Truss Core Sandwich Structures

    Institute of Scientific and Technical Information of China (English)

    Ming Li; Linzhi Wu; Li Ma; Bing Wang; Zhengxi Guan

    2011-01-01

    The mechanical performance of an all-composite pyramidal lattice truss core sandwich structure was investigated both theoretically and experimentally. Sandwich structures were fabricated with a hot compression molding method using carbon fiber reinforced composite T700/3234. The out-of-plane compression and shear tests were conducted. Experimental results showed that the all-composite pyramidal lattice truss core sandwich structures were more weight efficient than other metallic lattice truss core sandwich structures. Failure modes revealed that node rupture dominated the mechanical behavior of sandwich structures.

  16. Fatigue fracture of fiber reinforced polymer honeycomb composite sandwich structures for gas turbine engines

    Science.gov (United States)

    Nikhamkin, Mikhail; Sazhenkov, Nikolai; Samodurov, Danil

    2017-05-01

    Fiber reinforced polymer honeycomb composite sandwich structures are commonly used in different industries. In particular, they are used in the manufacture of gas turbine engines. However, fiber reinforced polymer honeycomb composite sandwich structures often have a manufacturing flaw. In theory, such flaws due to their rapid propagation reduce the durability of fiber reinforced polymer honeycomb composite sandwich structures. In this paper, bending fatigue tests of fiber reinforced polymer honeycomb composite sandwich structures with manufacturing flaws were conducted. Comparative analysis of fatigue fracture of fiber reinforced polymer honeycomb composite sandwich specimens was conducted before and after their bending fatigue tests. The analysis was based on the internal damage X-ray observation of fiber reinforced polymer honeycomb composite sandwich specimens.

  17. Sandwich Structured Composites for Aeronautics: Methods of Manufacturing Affecting Some Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Aneta Krzyżak

    2016-01-01

    Full Text Available Sandwich panels are composites which consist of two thin laminate outer skins and lightweight (e.g., honeycomb thick core structure. Owing to the core structure, such composites are distinguished by stiffness. Despite the thickness of the core, sandwich composites are light and have a relatively high flexural strength. These composites have a spatial structure, which affects good thermal insulator properties. Sandwich panels are used in aeronautics, road vehicles, ships, and civil engineering. The mechanical properties of these composites are directly dependent on the properties of sandwich components and method of manufacturing. The paper presents some aspects of technology and its influence on mechanical properties of sandwich structure polymer composites. The sandwiches described in the paper were made by three different methods: hand lay-up, press method, and autoclave use. The samples of sandwiches were tested for failure caused by impact load. Sandwiches prepared in the same way were used for structural analysis of adhesive layer between panels and core. The results of research showed that the method of manufacturing, more precisely the pressure while forming sandwich panels, influences some mechanical properties of sandwich structured polymer composites such as flexural strength, impact strength, and compressive strength.

  18. Sandwich Magnetoelectric Composites of Polyvinylidene Fluoride, Tb-Dy-Fe Alloy, and Lead Zirconate Titanate

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The novel sandwich composites were prepared by sandwiching a polyvinylidene fluoride/Tb-Dy-Fe alloy composite (PVDF/Terfenol-D) between polyvinylidene fluoride/lead zirconate titanate composites(PVDF/PZT). The maximum magnetoelectric effect voltage coefficient, (dE/dH)33max, of the sandwich composites is higher than that of three-phase composites at their own optimal loading level of Terfenol-D. This is attributed to less interface relaxations of strain and better polarization of the sandwich composites. When the volume fraction of Terfenol-D is higher than 0.10, no coupling interaction for three-phase composites could intensity, the magnetoelectric effect voltage coefficient, (dE/dH)33, of sandwich composites is higher than that of three-phase composites; at low magnetic field intensity, (dE/dH)33 of sandwich composites is lower than that of three-phase composites. At their resonance frequency, the (dE/dH)33max of the sandwich composites and the dH)33max at resonance frequency confirms the improvement of maximum magnetoelectric effect coefficient via sandwich-structured composites.

  19. Active structural health monitoring of composite plates and sandwiches

    Directory of Open Access Journals (Sweden)

    Sadílek P.

    2013-12-01

    Full Text Available The aim of presented work is to design, assemble and test a functional system, that is able to reveal damage from impact loading. This is done by monitoring of change of spectral characteristics on a damaged structure that is caused by change of mechanical properties of material or by change of structure’s geometry. Excitation and monitoring of structures was done using piezoelectric patches. Unidirectional composite plate was tested for eigenfrequencies using chirp signal. The eigenfrequencies were compared to results from experiments with an impact hammer and consequently with results from finite element method. Same method of finding eigenfrequencies was used on a different unidirectional composite specimen. Series of impacts were performed. Spectrum of eigenfrequencies was measured on undamaged plate and then after each impact. Measurements of the plate with different level of damage were compared. Following experiments were performed on sandwich materials where more different failures may happen. Set of sandwich beams (cut out from one plate made of two outer composite layers and a foam core was investigated and subjected to several impacts. Several samples were impacted in the same manner to get comparable results. The impacts were performed with growing impact energy.

  20. Dispersion of guided waves in composite laminates and sandwich panels

    Science.gov (United States)

    Schaal, Christoph; Mal, Ajit

    2015-03-01

    In composite structures, damages are often invisible from the surface and can grow to reach a critical size, potentially causing catastrophic failure of the entire structure. Thus safe operation of these structures requires careful monitoring of the initiation and growth of such defects. Ultrasonic methods using guided waves offer a reliable and cost-effective method for structural health monitoring in advanced structures. Guided waves allow for long monitoring ranges and are very sensitive to defects within their propagation path. In this work, the relevant properties of guided Lamb waves for damage detection in composite structures are investigated. An efficient numerical approach is used to determine their dispersion characteristics, and these results are compared to those from laboratory experiments. The experiments are based on a pitch-catch method, in which a pair of movable transducers is placed on one surface of the structure to induce and detect guided Lamb waves. The specific cases considered include an aluminum plate and an aluminum honeycomb sandwich panel with woven composite face sheets. In addition, a disbond of the interface between one of the face sheets and the honeycomb core of the sandwich panel is also considered, and the dispersion characteristics of the two resultant waveguides are determined. Good agreement between numerical and experimental dispersion results is found, and suggestions on the applicability of the pitch-catch system for structural health monitoring are made.

  1. Compressive and shear buckling analysis of metal matrix composite sandwich panels under different thermal environments

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1993-01-01

    Combined inplane compressive and shear buckling analysis was conducted on flat rectangular sandwich panels using the Raleigh-Ritz minimum energy method with a consideration of transverse shear effect of the sandwich core. The sandwich panels were fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that slightly slender (along unidirectional compressive loading axis) rectangular sandwich panels have the most desirable stiffness-to-weight ratios for aerospace structural applications; the degradation of buckling strength of sandwich panels with rising temperature is faster in shear than in compression; and the fiber orientation of the face sheets for optimum combined-load buckling strength of sandwich panels is a strong function of both loading condition and panel aspect ratio. Under the same specific weight and panel aspect ratio, a sandwich panel with metal matrix composite face sheets has much higher buckling strength than one having monolithic face sheets.

  2. Nondestructive and Strain Testing of Composite Sandwich Panels

    Science.gov (United States)

    Goyings, Ryan

    In April 2006, Sikorsky Aircraft received a contract from the United States Marine Corps (USMC) to develop a successor to their CH-53E heavy-lift helicopter. The new designation is the CH-53K "Super Stallion" and provides increased operating capabilities through the use of design revisions that incorporate extensive use of carbon fiber composites and composite sandwich panels. "The CH-53K will have five times the capability at half of the operational cost of the aircraft it's replacing. It will be the most capable helicopter ever produced. With more than twice the combat radius of the CH-53E, the CH-53K uses mature technology to deliver a fully shipboard compatible platform to meet current and future Marine Corps requirements". Upon introduction, it will be the largest rotary wing aircraft in the United States Department of Defense. The USMC will incorporate the CH-53K into the Joint Operations Concept of Full Spectrum Dominance and Sea Power 21 thereby enabling rapid, decisive operations and the early termination of conflict by projecting and sustaining forces to distant anti-access, area-denial environments. Even with an increased lift capability, the CH-53K is a slow moving, low flying helicopter susceptible to damage from small arms fire. There is no field level composite repair capability within any maintained documents published by the Department of Defense. Purdue University has developed a field level rapid repair technique capable of returning strength and integrity to damaged carbon composite structural components. The patch is made from carbon fiber weave that is applied using a field capable Vacuum Assisted Resin Transfer Molding (VARTM). This thesis seeks to validate, using nondestructive testing methods and strain monitoring, the manufacturing, damage, and repair process of composite sandwich panels representative of the CH-53K structural panels.

  3. Dispersion of Lamb waves in a honeycomb composite sandwich panel.

    Science.gov (United States)

    Baid, Harsh; Schaal, Christoph; Samajder, Himadri; Mal, Ajit

    2015-02-01

    Composite materials are increasingly being used in advanced aircraft and aerospace structures. Despite their many advantages, composites are often susceptible to hidden damages that may occur during manufacturing and/or service of the structure. Therefore, safe operation of composite structures requires careful monitoring of the initiation and growth of such defects. Ultrasonic methods using guided waves offer a reliable and cost effective method for defects monitoring in advanced structures due to their long propagation range and their sensitivity to defects in their propagation path. In this paper, some of the useful properties of guided Lamb type waves are investigated, using analytical, numerical and experimental methods, in an effort to provide the knowledge base required for the development of viable structural health monitoring systems for composite structures. The laboratory experiments involve a pitch-catch method in which a pair of movable transducers is placed on the outside surface of the structure for generating and recording the wave signals. The specific cases considered include an aluminum plate, a woven composite laminate and an aluminum honeycomb sandwich panel. The agreement between experimental, numerical and theoretical results are shown to be excellent in certain frequency ranges, providing a guidance for the design of effective inspection systems.

  4. Natural Cork Agglomerate Employed as an Environmentally Friendly Solution for Quiet Sandwich Composites

    Science.gov (United States)

    Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

    2012-01-01

    Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades. PMID:22574250

  5. Combined-load buckling behavior of metal-matrix composite sandwich panels under different thermal environments

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1991-01-01

    Combined compressive and shear buckling analysis was conducted on flat rectangular sandwich panels with the consideration of transverse shear effects of the core. The sandwich panel is fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that the square panel has the highest combined load buckling strength, and that the buckling strength decreases sharply with the increases of both temperature and panel aspect ratio. The effect of layup (fiber orientation) on the buckling strength of the panels was studied in detail. The metal matrix composite sandwich panel was much more efficient than the sandwich panel with nonreinforced face sheets and had the same specific weight.

  6. A Novel Method to Decrease Micro-residual Stresses of Fibrous Composites by Adding Carbon Nanotube

    Directory of Open Access Journals (Sweden)

    M. M. Shokrieh

    2013-12-01

    Full Text Available In this research, a novel method to decrease micro-residual stresses of fibrous composites by adding carbon nanotubes (CNTs is proposed in detail. The negative coefficient of thermal expansion and the high young’s modulus of CNTs can be utilized to counterbalance the process induced residual stresses in composites. To this end, first, the effects of adding CNTs to the matrix of fibrous composites in reducing the coefficient of thermal expansion (CTE and increasing of young’s modulus of matrix are studied theoretically. Then, a three phase micromechanical model (the energy method is used to model the effect of CNT in reducing the residual stresses of fibrous composites. The results show that by addition of CNTs, enhancements in properties of matrix are obtained and lead to decrease in micro-residual stresses of matrix and fiber up to 72%.

  7. Compositional variation of fibrous callus and joint cartilage in different internal environments

    Institute of Scientific and Technical Information of China (English)

    SUN Xiao-tang; HU Yun-yu; ZHAO Li; L(U) Rong; WANG Jun; BAI Jian-ping

    2006-01-01

    Objective: To evaluate the compositional variation of fibrous callus in the fracture site and the joint cavity and joint cartilage after being transplanted in the muscle pouch.Methods: Thirty 2-month-old New Zealand white rabbits (weighing 1-1.5 kg) were randomly divided into two groups: a callus transplantation group (Group A, n =15) and a cartilage transplantation group ( Group B, n =15). In Group A, closed radius fracture was made and the autologous fibrous callus was transplanted in the right knee joint cavity at 12 days postoperatively. In Group B, the right knee joint cartilage of the animals was transplanted in the autologous back muscle pouches under anesthesia. Then all the animals were killed by overdose anesthetic 3 weeks after transplantation. And the transplanted fibrous callus,the healed bones in the fracture sites and the transplanted joint cartilage were obtained for assessment of compositional variation.Results: Pure fibrous composition was found in the callus at the fracture sites in Group A at 12 days postoperatively. And for 11 out of the 15 animals, the fibrous callus was transformed into cartilaginous tissues after 3 weeks of transplantation, but the fibrous callus was absent in the other 4 animals. The fibrous calluses at the original site and the fracture locus were differentiated into bony tissues. Bony tissue transformation was found in the transplanted joint cartilages in the muscle pouch of all the animals in Group B.Conclusions: The fracture sites or joint cavity may facilitate callus differentiation in different ways: the former is helpful for osteogenesis while the latter for the development and maintenance of cartilages, and the muscle pouch is inclined to induce the osteogenic phenotype for cartilages.

  8. UHPC SANDWICH STRUCTURES WITH COMPOSITE COATING UNDER COMPRESSIVE LOAD

    Directory of Open Access Journals (Sweden)

    Jan Markowski

    2016-12-01

    Full Text Available Ultra-high-performance concrete (UHPC sandwich structures with composite coating serve as multipurpose load-bearing elements. The UHPC’s extraordinary compressive strength is used in a multi-material construction element, while issues regarding the concrete’s brittle failure behaviour are properly addressed. A hollow section concrete core is covered by two steel tubes. The outer steel tube is wrapped in a composite material. By this design, UHPC is used in a material- and shape-optimised way with a low dead weight ratio[1] concerning the load-bearing capacity and stability[2]. The cross-section’s hollow shape optimises the construction’s buckling stability while saving self-weight. The composite coating on the column’s outside functions both as a layer increasing the construction’s durability and as a structural component increasing the the maximum and the residual load capacity. Investigations on the construction’s structural behaviour were performed.

  9. EFFECT OF DIVIDED CORE ON THE BENDING PERFORMANCES OF TEXTILE REINFORCED FOAM CORE SANDWICH COMPOSITES

    Directory of Open Access Journals (Sweden)

    ALPYILDIZ Tuba

    2016-05-01

    Full Text Available Sandwich composites are generally used in marine applications, wind turbines, space and aircraft vehicles due to their high bending rigidities in addition to their lighter weights. The objective of this study is to investigate the effect of divided foam core and interlayer sheet of glass fabric on the bending performances of sandwich composites which are manufactured with glass fabrics as the facesheets/interlayer sheets and PVC foam as the core material. Sandwich composites with single and divided core are manufactured and compared in terms of flexural behavious via three point bending tests. It is found that the bending performance is enhanced with the use of divided core and using divided core does not affect the behaviour of the sandwich composite against bending deformations. In the case of the plain core sandwich composite, dividing the core is advised for certain applications rather than perforating the core to increase the bending stiffness and strength of the textile reinforced sandwich composites because it is possible to purchase core with any thickness and there is no need for additional process such as perforation. The proposed application could enhance the bending performances without altering the weight and cost of the sandwich composites, which are preferred due to their higher bending rigidities in relation to their lighter weights.

  10. Detecting and identifying damage in sandwich polymer composite by using acoustic emission

    DEFF Research Database (Denmark)

    McGugan, M.; Sørensen, Bent F.; Østergaard, R.

    2006-01-01

    Acoustic emission is a useful monitoring tool for extracting extra information during mechanical testing of polymer composite sandwich materials. The study of fracture mechanics within test specimens extracted from wind turbine blade material ispresented. The contribution of the acoustic emission...

  11. Measuring Moisture Levels in Graphite Epoxy Composite Sandwich Structures

    Science.gov (United States)

    Nurge, Mark; Youngquist, Robert; Starr, Stanley

    2011-01-01

    Graphite epoxy composite (GEC) materials are used in the construction of rocket fairings, nose cones, interstage adapters, and heat shields due to their high strength and light weight. However, they absorb moisture depending on the environmental conditions they are exposed to prior to launch. Too much moisture absorption can become a problem when temperature and pressure changes experienced during launch cause the water to vaporize. The rapid state change of the water can result in structural failure of the material. In addition, heat and moisture combine to weaken GEC structures. Diffusion models that predict the total accumulated moisture content based on the environmental conditions are one accepted method of determining if the material strength has been reduced to an unacceptable level. However, there currently doesn t exist any field measurement technique to estimate the actual moisture content of a composite structure. A multi-layer diffusion model was constructed with Mathematica to predict moisture absorption and desorption from the GEC sandwich structure. This model is used in conjunction with relative humidity/temperature sensors both on the inside and outside of the material to determine the moisture levels in the structure. Because the core materials have much higher diffusivity than the face sheets, a single relative humidity measurement will accurately reflect the moisture levels in the core. When combined with an external relative humidity measurement, the model can be used to determine the moisture levels in the face sheets. Since diffusion is temperaturedependent, the temperature measurements are used to determine the diffusivity of the face sheets for the model computations.

  12. Mechanical properties characterization of composite sandwich materials intended for space antenna applications

    Science.gov (United States)

    Bowles, Kenneth J.; Vannucci, Raymond D.

    1986-01-01

    The composite materials proposed for use in the Advanced Communications Technology Satellite (ACTS) Program contains a new, high modulus graphite fiber as the reinforcement. A study was conducted to measure certain mechanical properties of the new fiber-reinforced material as well as of a composite-faced aluminum honeycomb sandwich structure. Properties were measured at -157, 22, and 121 C. Complete characterization of this material was not intended. Longitudinal tensile, picture-frame shear, short-beam shear, and flexural tests were performed on specimens of the composite face-sheet materials. Unidirectional, cross-plied, and quasi-isotropic fiber composite ply layup designs were fabricated and tested. These designs had been studied by using NASA's Integrated Composite Analyzer (ICAN) computer program. Flexural tests were conducted on (+/- 60/0 deg) sub s composite-faced sandwich structure material. Resistance strain gages were used to measure strains in the tensile, picture-frame, and sandwich flexural tests. The sandwich flexural strength was limited by the core strength at -157 and 22 C. The adhesive bond strength was the limiting factor at 121 C. Adhesive mechanical properties are reflected in sandwich structure flexural properties when the span-to-depth ratio is great enough to allow a significant shear effect on the load-deflection behavior of the sandwich beam. Most measured properties agreed satisfactorily with the properties predicted by ICAN.

  13. Investigation of out of plane compressive strength of 3D printed sandwich composites

    Science.gov (United States)

    Dikshit, V.; Yap, Y. L.; Goh, G. D.; Yang, H.; Lim, J. C.; Qi, X.; Yeong, W. Y.; Wei, J.

    2016-07-01

    In this study, the 3D printing technique was utilized to manufacture the sandwich composites. Composite filament fabrication based 3D printer was used to print the face-sheet, and inkjet 3D printer was used to print the sandwich core structure. This work aims to study the compressive failure of the sandwich structure manufactured by using these two manufacturing techniques. Two different types of core structures were investigated with the same type of face-sheet configuration. The core structures were printed using photopolymer, while the face-sheet was made using nylon/glass. The out-of-plane compressive strength of the 3D printed sandwich composite structure has been examined in accordance with ASTM standards C365/C365-M and presented in this paper.

  14. A Refined Zigzag Beam Theory for Composite and Sandwich Beams

    Science.gov (United States)

    Tessler, Alexander; Sciuva, Marco Di; Gherlone, Marco

    2009-01-01

    A new refined theory for laminated composite and sandwich beams that contains the kinematics of the Timoshenko Beam Theory as a proper baseline subset is presented. This variationally consistent theory is derived from the virtual work principle and employs a novel piecewise linear zigzag function that provides a more realistic representation of the deformation states of transverse-shear flexible beams than other similar theories. This new zigzag function is unique in that it vanishes at the top and bottom bounding surfaces of a beam. The formulation does not enforce continuity of the transverse shear stress across the beam s cross-section, yet is robust. Two major shortcomings that are inherent in the previous zigzag theories, shear-force inconsistency and difficulties in simulating clamped boundary conditions, and that have greatly limited the utility of these previous theories are discussed in detail. An approach that has successfully resolved these shortcomings is presented herein. Exact solutions for simply supported and cantilevered beams subjected to static loads are derived and the improved modelling capability of the new zigzag beam theory is demonstrated. In particular, extensive results for thick beams with highly heterogeneous material lay-ups are discussed and compared with corresponding results obtained from elasticity solutions, two other zigzag theories, and high-fidelity finite element analyses. Comparisons with the baseline Timoshenko Beam Theory are also presented. The comparisons clearly show the improved accuracy of the new, refined zigzag theory presented herein over similar existing theories. This new theory can be readily extended to plate and shell structures, and should be useful for obtaining relatively low-cost, accurate estimates of structural response needed to design an important class of high-performance aerospace structures.

  15. Fracture Testing of Honeycomb Core Sandwich Composites Using the DCB-UBM Test

    DEFF Research Database (Denmark)

    Saseendran, Vishnu; Berggreen, Christian; Carlsson, Leif A.

    2015-01-01

    of the face/core interface. In this paper, a novel test-rig exploiting the double cantilever beam-uneven bending moments (DCB-UBM) concept is used to determine the fracture toughness of aircraft type honeycomb core sandwich composites as a function of the phase angle (mode-mixity), within the framework......Face/core debonds in sandwich structures cause loss of integrity of sandwich structures. The debond problem in honeycomb core sandwich composites has not been widely studied. A suitable fracture approach coupled with experimental validation is paramount to determine the fracture resistance...... of Linear Elastic Fracture Mechanics (LEFM). The Double Cantilever Beam subjected to Uneven Bending Moments (DCB-UBM) test set-up, which was introduced by Sørensen.et.al [1], circumvents any dependency of the pre-crack length in calculation of Gc. The new test setup is based on rotary actuators which...

  16. Structural performance of complex core systems for FRP-balsa composite sandwich bridge decks

    OpenAIRE

    Osei-Antwi, Michael

    2014-01-01

    Based on current fiber-reinforced polymer (FRP) composite construction principles, FRP decks fall into two categories: pultruded decks and sandwich decks. Sandwich decks comprise face sheets and either honeycombs or foams reinforced with internal FRP webs for shear resistance. The honeycomb structure and the webs cause debonding between the upper face sheets and the core due to the uneven support of the former. An alternative material that has high shear capacity and can provide uniform ...

  17. FIBROUS CERAMIC-CERAMIC COMPOSITE MATERIALS PROCESSING AND PROPERTIES

    OpenAIRE

    1986-01-01

    The introduction of continuous fibers in a ceramic matrix can improve its toughness, if the fiber-matrix bonding is weak enough, due to matrix microcracking and fiber pull-out. Ceramic-ceramic composite materials are processed according to liquid or gas phase techniques. The most important are made of glass, carbide, nitride or oxide matrices reinforced with carbon, SiC or Al2O3 fibers.

  18. Supporting structural components of fibrous composite materials in coach design; Tragende Strukturteile aus Faserverbundkunststoffen im Omnibusbau

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R.; Bartha, E. [Gottlob Anwaerther GmbH und Co., Stuttgart (Germany)

    1997-11-01

    This article is dealing with the possibilities for coach designers in using Fibrous composite materials like FGRP ans CFK. There are examples shown for three dimensional curved prefabricated parts in Fibrous composite method of Building (Sandwhich) forsupporting components. On the examples of an `integral front` are the advantages shown of such a construction in few of weight, manufacturing costs, resistance and working life. Coach specific particularities are taken particulary in consideration. (orig.) [Deutsch] Die Verwendung faserverstaerkter Kunststoffe als Werkstoff fuer die Karosserieaussenhaut hat sich beim Omnibusbau insbesondere aus Gruenden der einfachen dreidimensionalen Formbarkeit grossflaechig durchgesetzt. Verglichen mit gepressten Stahlblech-Formteilen, wie bei Pkw-Karosserien ueblich, lassen sich die vergleichsweise geringen Stueckzahlen bei Omnibussen in Kunststoff-Formen wirtschaftlich fertigen. Am Beispiel des Cityliners, einem Fernreisebus von Neoplan, wird der Einsatz faserverstaerkter tragende Karosserieteile mit UP-Harz-Matrix dargestellt. (orig.)

  19. Three-dimensional thermo-structural analysis of multidirectional fibrous composite plates

    Science.gov (United States)

    Mukherjee, Nilanjan; Sinha, P. K.

    A set of simple thermo-elastic constitutive relations are developed for a general n-directional fibrous composite. A typical multidirectional unit cell is assumed to consist of several unidirectional composite blocks. Transformation-based relationships are used to generate the thermo-elastic properties for the n-directional composite. The present material model is next used to analyze the thermostructural problem employing the finite element method. A quadratic isoparametric brick element is used to discretize both the thermal and structural fields. The material model is validated against an existing ideological model based on the laminate theory. Results reveal the effects of fibre directionality on several thermostructural parameters.

  20. Multiscale Finite-Element Modeling of Sandwich Honeycomb Composite Structures

    Directory of Open Access Journals (Sweden)

    Yu. I. Dimitrienko

    2014-01-01

    Full Text Available The paper presents a developed multi-scale model of sandwich honeycomb structures. The model allows us both to calculate effective elastic-strength characteristics of honeycomb and forced covering of sandwich, and to find a 3D stress-strain state of structures using the threedimensional elastic theory for non- homogeneous media. On the basis of finite element analysis it is shown, that under four-point bending the maximal value of bending and shear stresses in the sandwich honeycomb structures are realized in the zone of applied force and plate support. Here the local stress maxima approximately 2-3 times exceed the “engineering” theoretical plate values of bending and shear stresses in the middle of panel. It is established that at tests for fourpoint bending there is a failure of the honeycomb sandwich panels because of the local adhesion failure rather than because of the covering exfoliation off the honeycomb core in the middle of panel.

  1. An Analysis of Nondestructive Evaluation Techniques for Polymer Matrix Composite Sandwich Materials

    Science.gov (United States)

    Cosgriff, Laura M.; Roberts, Gary D.; Binienda, Wieslaw K.; Zheng, Diahua; Averbeck, Timothy; Roth, Donald J.; Jeanneau, Philippe

    2006-01-01

    Structural sandwich materials composed of triaxially braided polymer matrix composite material face sheets sandwiching a foam core are being utilized for applications including aerospace components and recreational equipment. Since full scale components are being made from these sandwich materials, it is necessary to develop proper inspection practices for their manufacture and in-field use. Specifically, nondestructive evaluation (NDE) techniques need to be investigated for analysis of components made from these materials. Hockey blades made from sandwich materials and a flat sandwich sample were examined with multiple NDE techniques including thermographic, radiographic, and shearographic methods to investigate damage induced in the blades and flat panel components. Hockey blades used during actual play and a flat polymer matrix composite sandwich sample with damage inserted into the foam core were investigated with each technique. NDE images from the samples were presented and discussed. Structural elements within each blade were observed with radiographic imaging. Damaged regions and some structural elements of the hockey blades were identified with thermographic imaging. Structural elements, damaged regions, and other material variations were detected in the hockey blades with shearography. Each technique s advantages and disadvantages were considered in making recommendations for inspection of components made from these types of materials.

  2. Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins

    Directory of Open Access Journals (Sweden)

    Zulzamri Salleh

    2016-12-01

    Full Text Available Sandwich composites or sandwich panels have been widely used as potential materials or building structures and are regarded as a lightweight material for marine applications. In particular, the mechanical properties, such as the compressive, tensile and flexural behaviour, of sandwich composites formed from glass fibre sheets used as the skin and glass microballoon/vinyl ester as the syntactic foam core were investigated in this report. This syntactic foam core is sandwiched between unidirectional glass fibre reinforced plastic (GFRP using vinyl ester resins to build high performance sandwich panels. The results show that the compressive and tensile strengths decrease when the glass microballoon content is increased in syntactic foam core of sandwich panels. Moreover, compressive modulus is also found to be decreased, and there is no trend for tensile modulus. Meanwhile, the flexural stiffness and effective flexural stiffness for edgewise position have a higher bending as 50% and 60%, respectively. Furthermore, the results indicated that the glass microballoon mixed in a vinyl ester should be controlled to obtain a good combination of the tensile, compressive and flexural strength properties.

  3. A variable transverse stiffness sandwich structure using fluidic flexible matrix composites (F2MC)

    Science.gov (United States)

    Li, Suyi; Lotfi, Amir; Shan, Ying; Wang, K. W.; Rahn, Christopher D.; Bakis, Charles E.

    2008-03-01

    Presented in this paper is the development of a novel honeycomb sandwich panel with variable transverse stiffness. In this structure, the traditional sandwich face sheets are replaced by the fluidic flexible matrix composite (F2MC) tube layers developed in recent studies. The F2MC layers, combined with the anisotropic honeycomb core material properties, provide a new sandwich structure with variable stiffness properties for transverse loading. In this research, an analytical model is derived based on Lekhitskii's anisotropic pressurized tube solution and Timoshenko beam theory. Experimental investigations are also conducted to verify the analytical findings. A segmented multiple-F2MC-tube configuration is synthesized to increase the variable stiffness range. The analysis shows that the new honeycomb sandwich structure using F2MC tubes of 10 segments can provide a high/low transverse stiffness ratio of 60. Segmentation and stiffness control can be realized by an embedded valve network, granting a fast response time.

  4. Flutter Characteristic Study of Composite Sandwich Panel with Functionally Graded Foam Core

    Directory of Open Access Journals (Sweden)

    Peng Jin

    2016-01-01

    Full Text Available This paper attempts to investigate the flutter characteristic of sandwich panel composed of laminated facesheets and a functionally graded foam core. The macroscopic properties of the foam core change continuously along this direction parallel to the facesheet lamina. The model used in the study is a simple sandwich panel-wing clamped at the root, with three simple types of grading strategies for FGM core: (1 linear grading strategy in the chord-wise direction, (2 linear grading strategy in the span-wise direction, and (3 bilinear grading of properties of foam core across the panel. The results show that use of FGM core has the potential to increase the flutter speed of the sandwich panel. Finally, a minimum weight design of composite sandwich panel with lamination parameters of facesheet and density distribution of foam core as design variables is conducted using particle swarm optimization (PSO.

  5. An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures

    Directory of Open Access Journals (Sweden)

    S. Jedari Salami

    2013-01-01

    Full Text Available The effects of adding an extra layer within a sandwich panel and two different core types in top and bottom cores on low velocity impact loadings are studied experimentally in this paper. The panel includes polymer composite laminated sheets for faces and the internal laminated sheet called extra layer sheet, and two types of crushable foams are selected as the core material. Low velocity impact tests were carried out by drop hammer testing machine to the clamped multilayer sandwich panels with expanded polypropylene (EPP and polyurethane rigid (PUR in the top and bottom cores. Local displacement of the top core, contact force and deflection of the sandwich panel were obtained for different locations of the internal sheet; meanwhile the EPP and PUR were used in the top and bottom cores alternatively. It was found that the core material type has made significant role in improving the sandwich panel’s behavior compared with the effect of extra layer location.

  6. Design feasibility study of a divertor component reinforced with fibrous metal matrix composite laminate

    Energy Technology Data Exchange (ETDEWEB)

    You, J.-H. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, Boltzmannstr. 2, D-85748 Garching (Germany)]. E-mail: j.h.you@ipp.mpg.de

    2005-01-01

    Fibrous metal matrix composites possess advanced mechanical properties compared to conventional alloys. It is expected that the application of these composites to a divertor component will enhance the structural reliability. A possible design concept would be a system consisting of tungsten armour, copper composite interlayer and copper heat sink where the composite interlayer is locally inserted into the highly stressed domain near the bond interface. For assessment of the design feasibility of the composite divertor concept, a non-linear multi-scale finite element analysis was performed. To this end, a micro-mechanics algorithm was implemented into a finite element code. A reactor-relevant heat flux load was assumed. Focus was placed on the evolution of stress state, plastic deformation and ductile damage on both macro- and microscopic scales. The structural response of the component and the micro-scale stress evolution of the composite laminate were investigated.

  7. Quantitative modelling of viscoelasticity of isotropic fibrous composites with viscoelastic matrices

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Despite the wide usage of isotropic fibrous composites with a viscoelastic polymer matrix,no analytic model for their mechanical behaviour is known.This paper develops such a model for time-dependent Young's modulus,showing that for typical constituents the time constants of composites are up to about 6% greater than the matrix shear time constant.Viscoelasticity is strongly suppressed for stiff fibres even at modest fibre volume fractions.Comparison with known results for particle and oriented fibre compos...

  8. The Use of Sprint Interface Element Delamination Simulation of Sandwich Composite Beam

    Science.gov (United States)

    Xu, Geng; Yan, Renjun

    2016-12-01

    Sandwich composite beams have been more and more used in various industries because of their excellent mechanical properties. However, the mismatched performance between face sheet and foam core always lead to such as cracks and damages in the core or face/core interface during the processes of manufacturing or service. Delamination damage at the adhesive interface is the most dangerous and could be one main source that the mechanical capability of the structure is serous degenerated. In this paper, a simple and natural model to evaluate the stiffness of the spring interface elements, which is based on the physics and the geometry of the adhesive layers, is proposed. In order to validate the model, cantilever beam bending test were conducted for marine sandwich composite I-beam. A good comparison has been found between predictions and experimental results, and results indicate that the spring interface element can provide an efficient model for the delamination simulation of sandwich composite structures.

  9. Influence of Stacking Sequence on the Impact and Postimpact Bending Behavior of Hybrid Sandwich Composites

    Science.gov (United States)

    Özen, M.

    2017-01-01

    A new hybrid sandwich structure was developed by using carbon, e-glass, and s-glass fabrics as reinforcement materials, an epoxy resin as the matrix material for face sheets, and a PVC foam as the core material. Six different configurations were prepared. Sandwich composites plates with different stacking sequences were subjected to low-speed impacts will energies of 7.5, 15, and 22.5 J. Their impact response is analyzed and reported in terms of the peak load as a function of impact energy. After impact tests, 3-point bending tests were conducted to determine the bending behavior of the sandwich composites after impacts in terms of their flexural strength. The results obtained showed that the use of carbon fabrics in the face sheets increased the peak loads for all the impact energies considered. The presence of carbon fibers in skin regions increased the flexural strength of the composites, but e-glass fibers decreased this strength.

  10. Size Effects in Impact Damage of Composite Sandwich Panels

    Science.gov (United States)

    Dobyns, Alan; Jackson, Wade

    2003-01-01

    Panel size has a large effect on the impact response and resultant damage level of honeycomb sandwich panels. It has been observed during impact testing that panels of the same design but different panel sizes will show large differences in damage when impacted with the same impact energy. To study this effect, a test program was conducted with instrumented impact testing of three different sizes of sandwich panels to obtain data on panel response and residual damage. In concert with the test program. a closed form analysis method was developed that incorporates the effects of damage on the impact response. This analysis method will predict both the impact response and the residual damage of a simply-supported sandwich panel impacted at any position on the panel. The damage is incorporated by the use of an experimental load-indentation curve obtained for the face-sheet/honeycomb and indentor combination under study. This curve inherently includes the damage response and can be obtained quasi-statically from a rigidly-backed specimen or a specimen with any support conditions. Good correlation has been obtained between the test data and the analysis results for the maximum force and residual indentation. The predictions can be improved by using a dynamic indentation curve. Analyses have also been done using the MSC/DYTRAN finite element code.

  11. Flexible electrodes based on polypyrrole/manganese dioxide/polypropylene fibrous membrane composite for supercapacitor

    Energy Technology Data Exchange (ETDEWEB)

    Jin Ming [Institute of Molecular Science, Key Laboratory of Chemical Biology and Molecular Engineering of Education Ministry, Shanxi University, Taiyuan 030006 (China); Han Gaoyi, E-mail: han_gaoyis@sxu.edu.cn [Institute of Molecular Science, Key Laboratory of Chemical Biology and Molecular Engineering of Education Ministry, Shanxi University, Taiyuan 030006 (China); Chang Yunzhen; Zhao Hua; Zhang Huanyu [Institute of Molecular Science, Key Laboratory of Chemical Biology and Molecular Engineering of Education Ministry, Shanxi University, Taiyuan 030006 (China)

    2011-11-30

    Highlights: > PPy/MnO{sub 2}/polypropylene fibrous film (PPF) is prepared by polymerizing pyrrole in gas. > The morphology and conductivity are influenced strongly by the content of PPy/MnO{sub 2}. > Specific capacitance of the capacitor reaches 110 F g{sup -1} based on amount of PPy/MnO{sub 2}. - Abstract: The composites of polypyrrole/manganese dioxide/polypropylene fibrous films (PPy/MnO{sub 2}/PPF) have been prepared in situ through chemical oxidation polymerization by using the mixture of FeCl{sub 3}.6H{sub 2}O and MnO{sub 2} adsorbed on PPF as oxidant in the atmosphere of pyrrole vapor at room temperature. The morphologies and structures of the composites are investigated by using scanning electron microscope and X-ray diffraction spectroscopy. The properties of the capacitor cells assembled by the composites of PPy/MnO{sub 2}/PPF are evaluated by cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectroscopy methods. The results reveal that the morphologies, conductivities and capacitance performance of the composites are influenced strongly by the content of MnO{sub 2} in the solution of oxidant. The capacitors assembled by PPy/MnO{sub 2}/PPF exhibit the property of quick charge/discharge, and the highest specific capacitance of about 110 F g{sup -1} is obtained when the PPy/MnO{sub 2} content in the composite is about 17.4%.

  12. Preparation and Performance of Continuous Glass Fiber Reinforced Polypropylene Composite Honeycomb Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Chen Ke

    2016-01-01

    Full Text Available As the light-weight and high-strength thermoplastic composites, novel honeycomb sandwich panels were discussed in this paper: continuous glass fiber reinforced polypropylene (GF/PP laminated sheets were used as the surface and polypropylene (PP honeycomb was used as the core. The effects of honeycomb core’s height, thickness and aperture on the mechanical properties were analyzed in this paper. The composite honeycomb sandwich panels exhibited excellent bending strength at 37.6MPa and lateral pressure strength at 25.8MPa.

  13. Study of Debond Fracture Toughness of Sandwich Composites with Metal Foam Core

    Institute of Scientific and Technical Information of China (English)

    Xinzhu Wang; Linzhi Wu; Shixun Wang

    2009-01-01

    Two types of experiments were designed and performed to evaluate the adhesive bond in metal foam composite sandwich structures. The tensile bond strength of face/core was determined through the flatwise tensile test (FWT). The test results show that the interfacial peel strength is lower than the interlaminar peel strength in FWT test. The mode I interfacial fracture toughness (GIC) of sandwich structures containing a pre-crack on the upper face/core interface is determined by modified cracked sandwich beam (MCSB) experiment. It is found that the crack propagates unsynchronously on the two side of the specimen and the propagation of interfacial debonding always stays on the face/core interface during the MCSB tests. In order to simulate the failure of metal foam composite sandwich structures, a computational model based on the Tsai-Hill failure criterion and cohesive zone model is used. By comparing with experiment results, it can be concluded that the computational model can validly simulate the interfacial failure of metal foam composite sandwich structures with reasonable accuracy.

  14. Optimum stacking sequence design of composite sandwich panel using genetic algorithms

    Science.gov (United States)

    Bir, Amarpreet Singh

    Composite sandwich structures recently gained preference for various structural components over conventional metals and simple composite laminates in the aerospace industries. For most widely used composite sandwich structures, the optimization problems only requires the determination of the best stacking sequence and the number of laminae with different fiber orientations. Genetic algorithm optimization technique based on Darwin's theory of survival of the fittest and evolution is most suitable for solving such optimization problems. The present research work focuses on the stacking sequence optimization of composite sandwich panels with laminated face-sheets for both critical buckling load maximization and thickness minimization problems, subjected to bi-axial compressive loading. In the previous studies, only balanced and even-numbered simple composite laminate panels have been investigated ignoring the effects of bending-twisting coupling terms. The current work broadens the application of genetic algorithms to more complex composite sandwich panels with balanced, unbalanced, even and odd-numbered face-sheet laminates including the effects of bending-twisting coupling terms.

  15. Parametric study on nonlinear vibration of composite truss core sandwich plate with internal resonance

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jia Nen; Liu, Jun [Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, Tianjin University of Technology, Tianjin (China); Zhang, Wei; Yao, Ming Hui [College of Mechanical Engineering, Beijing University of Technology, Beijing (China); Sun, Min [School of Science, Tianjin Chengjian University, Tianjin (China)

    2016-09-15

    Nonlinear vibrations of carbon fiber reinforced composite sandwich plate with pyramidal truss core are investigated. The governing equation of motion for the sandwich plate is derived by using a Zig-Zag theory under consideration of geometrically nonlinear. The natural frequencies of sandwich plates with different dimensions are calculated and compared with those obtained from the classic laminated plate theory and Reddy's third-order shear deformation plate theory. The frequency responses and waveforms of the sandwich plate when 1:3 internal resonance occurs are obtained, and the characteristics of the internal resonance are discussed. The influences of layer number of face sheet, strut radius, core height and inclination angle on the nonlinear responses of the sandwich plate are analyzed. The results demonstrate that the strut radius and inclination angle mainly affect the resonance frequency band of the sandwich plate, and the layer number and core height not only influence the resonance frequency band but also significantly affect the response amplitude.

  16. Experimental Investigations of Compressed Sandwich Composite/Honeycomb Cylindrical Shells

    Science.gov (United States)

    Muc, A.; Stawiarski, A.; Romanowicz, P.

    2017-06-01

    This article explains in some details the behaviour of thick, deep cylindrical sandwich panels subjected to compressive loads. In general, experimental results indicated that two different forms of failure have been observed - the first corresponds to the overall buckling and the second to the facesheet wrinkling. The obtained experimentally damages of shells are verified and validated with the use of the FE analysis, 2-D and 3-D both in the linear and non-linear approach. The unidirectional strain gauges were applied to detect the initiation of the overall buckling mode.

  17. Living nano-micro fibrous woven fabric/hydrogel composite scaffolds for heart valve engineering.

    Science.gov (United States)

    Wu, Shaohua; Duan, Bin; Qin, Xiaohong; Butcher, Jonathan T

    2017-01-18

    Regeneration and repair of injured or diseased heart valves remains a clinical challenge. Tissue engineering provides a promising treatment approach to facilitate living heart valve repair and regeneration. Three-dimensional (3D) biomimetic scaffolds that possess heterogeneous and anisotropic features that approximate those of native heart valve tissue are beneficial to the successful in vitro development of tissue engineered heart valves (TEHV). Here we report the development and characterization of a novel composite scaffold consisting of nano- and micro-scale fibrous woven fabrics and 3D hydrogels by using textile techniques combined with bioactive hydrogel formation. Embedded nano-micro fibrous scaffolds within hydrogel enhanced mechanical strength and physical structural anisotropy of the composite scaffold (similar to native aortic valve leaflets) and also reduced its compaction. We determined that the composite scaffolds supported the growth of human aortic valve interstitial cells (HAVIC), balanced the remodeling of heart valve ECM against shrinkage, and maintained better physiological fibroblastic phenotype in both normal and diseased HAVIC over single materials. These fabricated composite scaffolds enable the engineering of a living heart valve graft with improved anisotropic structure and tissue biomechanics important for maintaining valve cell phenotypes.

  18. Influence of residual stresses on the tensile strength of composite-metal sandwich laminates

    Science.gov (United States)

    Herakovich, C. T.; Wong, D. M.

    1977-01-01

    The tensile strength of boron-epoxy/aluminum sandwich laminates is discussed relative to the residual thermal stresses generated by curing and bonding at elevated temperatures. It is shown that the sandwich laminates investigated exhibit three dinstinct modes of failure, depending upon the fiber orientation of the composite. Sandwich laminates with moderate to high percentage of 0-deg fibers exhibit early failures initiated by edge effect; laminates with moderate to high percentage of 90-deg fibers fail according to a first-ply failure criterion; laminates with moderate to high percentages of plus or minus 45 deg plies fail at strains equal to or greater than the failure strain of the corresponding all-composite laminate.

  19. ON RESIDUAL COMPRESSIVE STRENGTH PREDICTION OF COMPOSITE SANDWICH PANELS AFTER LOW-VELOCITY IMPACT DAMAGE

    Institute of Scientific and Technical Information of China (English)

    Xie Zonghong; Anthony J. Vizzini; Tang Qingru

    2006-01-01

    This paper introduces a nonlinear finite element analysis on damage propagation behavior of composite sandwich panels under in-plane uniaxial quasi-static compression after a low velocity impact. The major damage modes due to the impact, including the residual indentation on the impacted facesheet, the initially crushed core under the impacted area, and the delamination are incorporated into the model. A consequential core crushing mechanism is incorporated intothe analysis by using an element deactivation technique. Damage propagation behavior, which corresponds to those observed in sandwich compression after impact (SCAI) tests, has been successfully captured in the numerical simulation. The critical far field stress corresponding to the onset of damage propagation at specified critical locations near the damage zone are captured successfully. They show a good correlation with experimental data. These values can be used to effectively predict the residual compressive strength of low-velocity impact damaged composite sandwich panels.

  20. Distortion-free single point imaging of multi-layered composite sandwich panel structures.

    Science.gov (United States)

    Marble, Andrew E; Mastikhin, Igor V; MacGregor, Rod P; Akl, Mohamad; LaPlante, Gabriel; Colpitts, Bruce G; Lee-Sullivan, Pearl; Balcom, Bruce J

    2004-05-01

    The results of a magnetic resonance imaging (MRI) investigation concerning the effects of an aluminum honeycomb sandwich panel on the B1 and B0 fields and on subsequent image quality are presented. Although the sandwich panel structure, representative of an aircraft composite material, distorts B0 and attenuates B1, distortion-free imaging is possible using single point (constant time) imaging techniques. A new expression is derived for the error caused by gradient field distortion due to the heterogeneous magnetic susceptibility within a sample and this error is shown not to cause geometric distortion in the image. The origin of the B0 distortion in the sample under investigation was also examined. The graphite-epoxy 'skin' of the panel is the principal source of the B0 distortion. Successful imaging of these structures sets the stage for the development of methods for detecting moisture ingress and degradation within composite sandwich structures.

  1. Buckling analysis of curved composite sandwich panels subjected to inplane loadings

    Science.gov (United States)

    Cruz, Juan R.

    1993-01-01

    Composite sandwich structures are being considered for primary structure in aircraft such as subsonic and high speed civil transports. The response of sandwich structures must be understood and predictable to use such structures effectively. Buckling is one of the most important response mechanisms of sandwich structures. A simple buckling analysis is derived for sandwich structures. This analysis is limited to flat, rectangular sandwich panels loaded by uniaxial compression (N(sub x)) and having simply supported edges. In most aerospace applications, however, the structure's geometry, boundary conditions, and loading are usually very complex. Thus, a general capability for analyzing the buckling behavior of sandwich structures is needed. The present paper describes and evaluates an improved buckling analysis for cylindrically curved composite sandwich panels. This analysis includes orthotropic facesheets and first-order transverse shearing effects. Both simple support and clamped boundary conditions are also included in the analysis. The panels can be subjected to linearly varying normal loads N(sub x) and N(sub y) in addition to a constant shear load N(sub xy). The analysis is based on the modified Donnell's equations for shallow shells. The governing equations are solved by direct application of Galerkin's method. The accuracy of the present analysis is verified by comparing results with those obtained from finite element analysis for a variety of geometries, loads, and boundary conditions. The limitations of the present analysis are investigated, in particular those related to the shallow shell assumptions in the governing equations. Finally, the computational efficiency of the present analysis is considered.

  2. Analysis of the Flexure Behavior and Compressive Strength of Fly Ash Core Sandwiched Composite Material

    Directory of Open Access Journals (Sweden)

    Vijaykumar H.K

    2014-07-01

    Full Text Available In this paper, commercially available Fly Ash and Epoxy is used for the core material, woven glass fabric as reinforcing skin material, epoxy as matrix/adhesive materials used in this study for the construction of sandwich composite. Analysis is carried out on different proportions of epoxy and fly ash sandwiched composite material for determining the flexural strength and compressive strength, three different proportions of epoxy and fly ash used for the study. Those are 65%-35% (65% by weight fly ash and 35% by weight epoxy resin composite material, 60%-40% and 55%-45% composite material. 60%-40% composite material specimen shows better results in the entire test carried out i.e. Flexure and Compression. The complete experimental results are discussed and presented in this paper.

  3. Fabrication of a 2014Al-SiC/2014Al Sandwich Structure Composite with Good Tensile Strength and Ductility

    Science.gov (United States)

    Zhu, Xian; Zhao, Yu-Guang; Wang, Hui-Yuan; Wang, Zhi-Guo; Wu, Min; Pei, Chang-hao; Chen, Chao; Jiang, Qi-Chuan

    2016-11-01

    A sandwich structure laminate composed of a ductile 2014Al inter-layer and two nanoscale SiC reinforced 2014Al (SiC/2014Al) composite outer layers was successfully fabricated through the combination of powder metallurgy and hot rolling. The ductile 2014Al inter-layer effectively improved the processability of the sandwiched laminates. Tensile test revealed that the yield strength and ultimate tensile strength of the sandwiched laminate were 287 and 470 MPa, respectively, compared with 235 and 425 MPa for monolithic 2014Al. The good performance of the sandwiched laminate results from the strong bonding between the SiC/2014Al composites layer and the ductile 2014Al layer. Thus, the sandwich structure with a composite surface and ductile core is effective for increasing the strength and toughness of composite laminates.

  4. Fabrication of a 2014Al-SiC/2014Al Sandwich Structure Composite with Good Tensile Strength and Ductility

    Science.gov (United States)

    Zhu, Xian; Zhao, Yu-Guang; Wang, Hui-Yuan; Wang, Zhi-Guo; Wu, Min; Pei, Chang-hao; Chen, Chao; Jiang, Qi-Chuan

    2016-09-01

    A sandwich structure laminate composed of a ductile 2014Al inter-layer and two nanoscale SiC reinforced 2014Al (SiC/2014Al) composite outer layers was successfully fabricated through the combination of powder metallurgy and hot rolling. The ductile 2014Al inter-layer effectively improved the processability of the sandwiched laminates. Tensile test revealed that the yield strength and ultimate tensile strength of the sandwiched laminate were 287 and 470 MPa, respectively, compared with 235 and 425 MPa for monolithic 2014Al. The good performance of the sandwiched laminate results from the strong bonding between the SiC/2014Al composites layer and the ductile 2014Al layer. Thus, the sandwich structure with a composite surface and ductile core is effective for increasing the strength and toughness of composite laminates.

  5. Experimental investigation of fiberglass sandwich composite bending behaviour after severe aging condition

    Science.gov (United States)

    Gambaro, Carla; Lertora, Enrico; Mandolfino, Chiara

    2016-10-01

    Fiber Reinforced Polymer (FRP) sandwich panels are increasing their application as structural and non-structural components in all kinds of construction. By varying the material and thickness of core and face sheets, it is possible to obtain sandwich structures with different properties and performance. In particular, their advantages as lightweight and high mechanical properties make them extremely suitable for the transport industry. One of the most critical aspects regarding composite materials for engineering application is their performance after hygrothermal aging. The panels used in this study are composed of low density core, made by thermosetting resin foam with microspheres and glass fibers rolled until obtaining the required thickness, and two face sheets of the same material but realized in high density. In this study, the authors focused on the bending behaviour of this kind of sandwich panel, as received and after severe aging cycles.

  6. Manufacture of Green-Composite Sandwich Structures with Basalt Fiber and Bioepoxy Resin

    Directory of Open Access Journals (Sweden)

    J. P. Torres

    2013-01-01

    Full Text Available Nowadays, there is a growing interest for the use and development of materials synthesized from renewable sources in the polymer composites manufacturing industry; this applies for both matrix and reinforcement components. In the present research, a novel basalt fibre reinforced (BFR bioepoxy green composite is proposed as an environmentally friendly alternative to traditional petroleum-derived composites. In addition, this material system was combined with cork as core material for the fabrication of fibre composite sandwich structures. Mechanical properties of both skin and core materials were assessed through flexural and tensile tests. Finite element (FEM simulations for the mechanical stress analysis of the sandwich material were carried out, and a maximum allowable shear stress for material failure under bending loads was established. Permeability measurements of the basalt fabrics were carried out in order to perform numerical simulations of liquid composite moulding (LCM processes on the PAM-RTM software. The proposed green-composite sandwich material was used for the fabrication of a longboard as a case study for a sports equipment application. Numerical simulations of the mould filling stage allowed the determination of an optimal mould filling strategy. Finally, the load-bearing capacity of the board was studied by means of FEM simulations, and the presented design proved to be acceptable for service.

  7. Properties of composition sinter prepared from fibrous barium titanate and nanometer zirconia

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Fibrous Batium Titanate particles,30-50 μm long,prepared by a hydrothermal reaction,and the monoclinic phase and nanometer Zirconia,11.6 nm long were prepared by citric acid reaction respectively.Then,the two were composite sintered to produce a new functional material by making full use of crystal-axis orientation of fibers and the activity of nanometer powder.The analydid of composition and microstructure of the new material in terms of XRD and SEM.shows that the solid solution was formed between fibers and nanometer powder,and the distance between lattice(d value)of Barium Titanate changed.But the crystal-axis orientations of fibers remain unchanged.

  8. STUDY ON FIBROUS COMPOSITES BEHAVIOUR IN HYDRODYNAMIC PROCESS OF WINE FILTRATION

    Directory of Open Access Journals (Sweden)

    Petronela Nechita

    2009-11-01

    Full Text Available This study concerns the implementation and performance evaluation of fibrous composites in sterile filtration of wine. Conditions of preparation were established having in view that the separation of particulate contaminants from liquids by depth filtration is occurring by mechanical entrapment into structural pores and by electrokinetic adsorption, and both retention mechanisms are influenced by various factors. Functional characteristics and behaviour of the filtering composite in industrial filtration of wine were evaluated. It was found that the effectiveness with which micro-organisms were retained was substantially improved by a porous structure characterized by small pores, and respectively by high resistance to air filtration, as well as by a higher content of cationic charges in the system.

  9. Filtration efficiency of an electrostatic fibrous filter: Studying filtration dependency on ultrafine particle exposure and composition

    DEFF Research Database (Denmark)

    Ardkapan, Siamak Rahimi; Johnson, Matthew S.; Yazdi, Sadegh

    2014-01-01

    The objective of the present study is to investigate the relationship between ultrafine particle concentrations and removal efficiencies for an electrostatic fibrous filter in a laboratory environment. Electrostatic fibrous filters capture particles efficiently, with a low pressure drop. Therefor...

  10. Lamb wave-based BVID imaging for a curved composite sandwich panel

    Science.gov (United States)

    He, Jiaze; Yuan, Fuh-Gwo

    2017-02-01

    Composite sandwich structures, consisting of a low density core sandwiched between two laminated facesheets, have been widely used in various aerospace structures. A new Lamb wave-based imaging condition, which will be referred to as the inverse incident wave energy (IIWE) imaging criterion, is proposed in this paper to resolve the situations where the incident wave energy weakly penetrates into the damaged area in the upper facesheet region. Current imaging conditions by analyzing wavefield reconstructed from laser Doppler vibrometer (LDV) scanning have been proven to be adequate for imaging damage in layered composite laminates. In this research, those current imaging conditions were applied and compared in the composite foam structures for barely visible impact damage (BVID). A piezoelectric wafer was used to excite Lamb waves into the structure and a LDV was used to scan the potential damaged areas in the upper facesheet of the panel. A BVID site in a curved composite sandwich foam aileron was inspected using various wavefield analysis methods and the damage images were compared with C-scan images. A few imaging conditions that are effective for this BVID site are identified when the incident waves have difficulties penetrating into the damaged region.

  11. Shear Behavior of 3D Woven Hollow Integrated Sandwich Composites: Experimental, Theoretical and Numerical Study

    Science.gov (United States)

    Zhou, Guangming; Liu, Chang; Cai, Deng'an; Li, Wenlong; Wang, Xiaopei

    2016-11-01

    An experimental, theoretical and numerical investigation on the shear behavior of 3D woven hollow integrated sandwich composites was presented in this paper. The microstructure of the composites was studied, then the shear modulus and load-deflection curves were obtained by double lap shear tests on the specimens in two principal directions of the sandwich panels, called warp and weft. The experimental results showed that the shear modulus of the warp was higher than that of the weft and the failure occurred in the roots of piles. A finite element model was established to predict the shear behavior of the composites. The simulated results agreed well with the experimental data. Simultaneously, a theoretical method was developed to predict the shear modulus. By comparing with the experimental data, the accuracy of the theoretical method was verified. The influence of structural parameters on shear modulus was also discussed. The higher yarn number, yarn density and dip angle of the piles could all improve the shear modulus of 3D woven hollow integrated sandwich composites at different levels, while the increasing height would decrease the shear modulus.

  12. Tensile Properties and Failure Mechanism of 3D Woven Hollow Integrated Sandwich Composites

    Science.gov (United States)

    Liu, Chang; Cai, Deng'an; Zhou, Guangming; Lu, Fangzhou

    2017-01-01

    Tensile properties and failure mechanism of 3D woven hollow integrated sandwich composites are investigated experimentally, theoretically and numerically in this paper. Firstly, the tensile properties are obtained by quasi-static tensile tests on the specimens in two principal directions of the sandwich panels, called warp and weft. The experimental results shows that the tensile performances of the warp are better than that of the weft. By observing the broken specimens, it is found that the touch parts between yarns are the main failure regions under tension. Then, a theoretical method is developed to predict the tensile properties. By comparing with the experimental data, the accuracy of the theoretical method is verified. Simultaneously, a finite element model is established to predict the tensile behavior of the composites. The numerical results agree well with the experimental data. Moreover, the simulated progressive damages show that the contact regions in the warp and weft tension are both the initial failure areas.

  13. Characterization of compressive and short beam shear strength of bamboo opened cell foam core sandwich composites

    Energy Technology Data Exchange (ETDEWEB)

    Setyawan, Paryanto Dwi, E-mail: paryanto-ds@yahoo.com; Sugiman,; Saputra, Yudhi [Department of Mechanical Engineering, Faculty of Engineering, University of Mataram, Mataram, West Nusa Tenggara (Indonesia)

    2016-03-29

    The paper presents the compressive and the short beam shear strength of a sandwich composite with opened cell foam made of bamboo fiber as the core and plywood as the skins. The core thickness was varied from 10 mm to 40 mm keeping the volume fraction of fiber constant. Several test s were carried out including the core density, flatwise compressive and the short beam shear testing in three point bending. The results show that the density of bamboo opened cell foam is comparable with commercial plastic foam, such as polyurethane foam. The compressive strength tends to increase linearly with increasing the core thickness. The short beam shear failure load of the sandwich composite increases with the increase of core thickness, however on the contrary, the short beam shear strength which tends to sharply decrease from the thickness of 10 mm to 30 mm and then becomes flat.

  14. Microstructure evolution process of Ferro-Aluminum based sandwich composite for electromagnetic shielding.

    Science.gov (United States)

    Luo, Zhichao; Zhang, Qiang; Ma, Xiangyu; Wu, Gaohui

    2014-09-01

    In this paper, sandwich composite (SWC) with Fe-Al soft magnetic alloy sandwiched between pure iron substrates was proposed and fabricated by hot pressing and diffusion treatment. The microstructure evolution process of the composite was investigated. Fe/Fe2Al5/Fe diffusion couple was obtained at 700 °C and subsequently kept at 900 °C for further isothermal diffusion. During the diffusion reactive process, we confirmed that major FeAl2 and minor Fe4Al13 were produced when Fe2Al5 dissolved. After 10h of diffusion treatment, FeAl and α-Fe(Al) were the only two intermetallic phases left. Except FeAl2, the thickness of each intermetallic layer held good parabolic relationship with the diffusion annealing time. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Characterization of compressive and short beam shear strength of bamboo opened cell foam core sandwich composites

    Science.gov (United States)

    Setyawan, Paryanto Dwi; Sugiman, Saputra, Yudhi

    2016-03-01

    The paper presents the compressive and the short beam shear strength of a sandwich composite with opened cell foam made of bamboo fiber as the core and plywood as the skins. The core thickness was varied from 10 mm to 40 mm keeping the volume fraction of fiber constant. Several test s were carried out including the core density, flatwise compressive and the short beam shear testing in three point bending. The results show that the density of bamboo opened cell foam is comparable with commercial plastic foam, such as polyurethane foam. The compressive strength tends to increase linearly with increasing the core thickness. The short beam shear failure load of the sandwich composite increases with the increase of core thickness, however on the contrary, the short beam shear strength which tends to sharply decrease from the thickness of 10 mm to 30 mm and then becomes flat.

  16. Response of Composite Fuselage Sandwich Side Panels Subjected to Internal Pressure and Axial Tension

    Science.gov (United States)

    Rouse, Marshall; Ambur, Damodar R.; Dopker, Bernard; Shah, Bharat

    1998-01-01

    The results from an experimental and analytical study of two composite sandwich fuselage side panels for a transport aircraft are presented. Each panel has two window cutouts and three frames and utilizes a distinctly different structural concept. These panels have been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on both panels. One of the sandwich panels was tested with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. A damage tolerance study was conducted on the two-frame panel by cutting a notch in the panel that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. Both the sandwich panel designs successfully satisfied all desired load requirements in the experimental part of the study, and experimental results from the two-frame panel with and without damage are fully explained by the analytical results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in. wide frame spacing to further reduce aircraft fuselage structural weight.

  17. Effect of core density on deformation and failure in sandwich composites subjected to underwater impulsive loads

    Directory of Open Access Journals (Sweden)

    S Avachat

    2016-09-01

    Full Text Available The response of sandwich structures to underwater blast loading is analyzed. The analysis focuses on the effect of varying structural attributes on energy dissipation and deformation. The structures analyzed are simply-supported sandwich structures with PVC foam cores and fiber-reinforced polymer composite facesheets. For the analysis carried out, the material properties of the sandwich cores are varied and the total mass is kept constant. In conjunction with experiments, simulations account for underwater blast loading on structures in air-backed and water-backed conditions. Core crushing is accounted for through the Deshpande and Fleck model and facesheet failure is accounted for using the Hashin damage model. Results reveal a significant difference between the response of air-backed and water-backed/submerged structures. In general, thick and low-density cores provide superior blast mitigation and failure resistance. Scaling relations are developed to quantify the responses. These relations can be used to optimize the design of sandwich structures in critical parts of ships like keel, turbine-blades and rudders which involve different contact conditions with water.

  18. Detecting and identifying damage in sandwich polymer composite by using acoustic emission

    Energy Technology Data Exchange (ETDEWEB)

    McGugan, M.; Soerensen, Bent F.; Oestergaard, R.; Bech, T.

    2006-12-15

    Acoustic emission is a useful monitoring tool for extracting extra information during mechanical testing of polymer composite sandwich materials. The study of fracture mechanics within test specimens extracted from wind turbine blade material is presented. The contribution of the acoustic emission monitoring technique in defining different failure modes identified during the testing is discussed. The development of in-situ structural monitoring and control systems is considered. (au)

  19. Chiral front propagation in liquid-crystalline materials: Formation of the planar monodomain twisted plywood architecture of biological fibrous composites.

    Science.gov (United States)

    De Luca, Gino; Rey, Alejandro D

    2004-01-01

    Biological fibrous composites commonly exhibit an architecture known as twisted plywood, which is similar to that of the cholesteric liquid-crystalline mesophases. The explanation for the structural similarity is that biological fibrous composites adopt a lyotropic cholesteric liquid-crystalline phase during their formation process. In this work, a mathematical model based on the Landau-de Gennes theory of liquid crystals has been developed to reproduce the process by which long chiral fibrous molecules form the twisted plywood structures observed in biological composites. The dynamics of the process was then further investigated by analytically solving a simplified version of the governing equations. Results obtained from the model are in good qualitative agreement with the theory of Neville [Biology of Fibrous Composites (Cambridge University Press, Cambridge, England, 1993)] who hypothesized the necessity of a constraining layer to lock the direction of the helical axis of the plywood in order to create a monodomain structure. Computational results indicate that the plywood architecture is obtained by a chiral front propagation process with a fully relaxed wake. The effects of chirality and concentration on the formation process kinetics are characterized.

  20. Magnetic field tunable capacitive dielectric:ionic-liquid sandwich composites

    Science.gov (United States)

    Wu, Ye; Bhalla, Amar; Guo, Ruyan

    2016-03-01

    We examined the tunability of the capacitance for GaFeO3-ionic liquid-GaFeO3 composite material by external magnetic and electric field. Up to 1.6 folds of capacitance tunability could be achieved at 957 kHz with voltage 4 V and magnetic field 0.02 T applied. We show that the capacitance enhancement is due to the polarization coupling between dielectric layer and ionic liquid layer.

  1. Behaviour of composite sandwich decks at high temperatures

    OpenAIRE

    Puchades, Maria Isabel Garcia

    2016-01-01

    Structures made of FRP composites have been shown to provide efficient and economical applications in bridges and piers. They are being increasingly used due to their several advantages when compared to traditional materials, namely, the lightness, strength, good insulation properties, low maintenance and improved performance when submitted to aggressive environments. However, fire behaviour has been recently identified by several authors as the most critical gap for these materials to be ful...

  2. Simultaneous Application of Fibrous Piezoresistive Sensors for Compression and Traction Detection in Glass Laminate Composites

    Science.gov (United States)

    Nauman, Saad; Cristian, Irina; Koncar, Vladan

    2011-01-01

    This article describes further development of a novel Non Destructive Evaluation (NDE) approach described in one of our previous papers. Here these sensors have been used for the first time as a Piecewise Continuous System (PCS), which means that they are not only capable of following the deformation pattern but can also detect distinctive fracture events. In order to characterize the simultaneous compression and traction response of these sensors, multilayer glass laminate composite samples were prepared for 3-point bending tests. The laminate sample consisted of five layers of plain woven glass fabrics placed one over another. The sensors were placed at two strategic locations during the lay-up process so as to follow traction and compression separately. The reinforcements were then impregnated in epoxy resin and later subjected to 3-point bending tests. An appropriate data treatment and recording device has also been developed and used for simultaneous data acquisition from the two sensors. The results obtained, under standard testing conditions have shown that our textile fibrous sensors can not only be used for simultaneous detection of compression and traction in composite parts for on-line structural health monitoring but their sensitivity and carefully chosen location inside the composite ensures that each fracture event is indicated in real time by the output signal of the sensor. PMID:22163707

  3. An anisotropic nanofiber/microsphere composite with controlled release of biomolecules for fibrous tissue engineering.

    Science.gov (United States)

    Ionescu, Lara C; Lee, Gregory C; Sennett, Brian J; Burdick, Jason A; Mauck, Robert L

    2010-05-01

    Aligned nanofibrous scaffolds can recapitulate the structural hierarchy of fiber-reinforced tissues of the musculoskeletal system. While these electrospun fibrous scaffolds provide physical cues that can direct tissue formation when seeded with cells, the ability to chemically guide a population of cells, without disrupting scaffold mechanical properties, would improve the maturation of such constructs and add additional functionality to the system both in vitro and in vivo. In this study, we developed a fabrication technique to entrap drug-delivering microspheres within nanofibrous scaffolds. We hypothesized that entrapping microspheres between fibers would have a less adverse impact on mechanical properties than placing microspheres within the fibers themselves, and that the composite would exhibit sustained release of multiple model compounds. Our results show that microspheres ranging from 10 - 20 microns in diameter could be electrospun in a dose-dependent manner to form nanofibrous composites. When delivered in a sacrificial PEO fiber population, microspheres remained securely entrapped between slow-degrading PCL fibers after removal of the sacrificial delivery component. Stiffness and modulus of the composite decreased with increasing microsphere density for composites in which microspheres were entrapped within each fiber, while stiffness did not change when microspheres were entrapped between fibers. The release profiles of the composite structures were similar to free microspheres, with an initial burst release followed by a sustained release of the model molecules over 4 weeks. Further, multiple model molecules were released from a single scaffold composite, demonstrating the capacity for multi-factor controlled release ideal for complex growth factor delivery from these structures. Copyright 2010 Elsevier Ltd. All rights reserved.

  4. Regenerated thermosetting styrene-co-acrylonitrile sandwich composite panels reinforced by jute fibre: structures and properties

    Indian Academy of Sciences (India)

    Jinglong Li; Qin Peng; Anrong Zeng; Junlin Li; Xiaole Wu; Xiaofei Liu

    2016-02-01

    Jute fibres-reinforced sandwich regenerated composite panels were fabricated using industrial waste thermosetting styrene-co-acrylonitrile (SAN) foam scraps via compression moulding for the purpose of recycling waste SAN foam and obtaining high physical performance. The jute fibres were, respectively, treated by heat, sodium hydroxide (NaOH) solution (5.0 wt%), and N,N-dimethylacetamide (DMAc) in order to improve the mechanical properties of the composites. The structures and mechanical properties of the composites were studied. The SAN matrix got compact and some crystalline region formed in SAN matrix via compression moulding. The composite reinforced by DMAc-treated jute fibres performed optimum mechanical properties among the regenerated panels whose impact strength, flexural strength, and compressive strength were 19.9 kJ m−2, 41.7 MPa, and 61.0 MPa, respectively. Good interfacial bonding between DMAc-treated fibres and SAN matrix was verified by peel test and exhibited in SEM photographs. Besides, the water absorption of DMAc-treated fibres composite was lower than other SAN/jute fibre-reinforced sandwich composite panels.

  5. Buckling Analysis of Angle-ply Composite and Sandwich Plates by Combination of Geometric Stiffness Matrix

    Science.gov (United States)

    Zhen, Wu; Wanji, Chen

    2007-05-01

    Buckling response of angle-ply laminated composite and sandwich plates are analyzed using the global-local higher order theory with combination of geometric stiffness matrix in this paper. This global-local theory completely fulfills the free surface conditions and the displacement and stress continuity conditions at interfaces. Moreover, the number of unknowns in this theory is independent of the number of layers in the laminate. Based on this global-local theory, a three-noded triangular element satisfying C1 continuity conditions has also been proposed. The bending part of this element is constructed from the concept of DKT element. In order to improve the accuracy of the analysis, a method of modified geometric stiffness matrix has been introduced. Numerical results show that the present theory not only computes accurately the buckling response of general laminated composite plates but also predicts the critical buckling loads of soft-core sandwiches. However, the global higher-order theories as well as first order theories might encounter some difficulties and overestimate the critical buckling loads for soft-core sandwich plates.

  6. Effects of Structural Damage on Dynamic Behavior at Sandwich Composite Beams - Part I-Theoretical Approach

    Directory of Open Access Journals (Sweden)

    Tufoi Marius

    2014-07-01

    Full Text Available This paper series presents an analysis regarding the dynamics of sandwich composite beams, embedded at one end, in order to highlight the effect of geometrical and material discontinuities upon the natural frequencies. In first part (Part I, analysis was performed with EulerBernoulli analytical method for determining the vibration modes and in second part (Part II, analysis was performed with numerical simulation in SolidWorks software for a five-layer composite. In the last section of the paper, an example is shown regarding how to interpret the obtained results.

  7. Analysis of a ceramic filled bio-plastic composite sandwich structure

    Energy Technology Data Exchange (ETDEWEB)

    Habib Ullah, M. [Institute of Space Science (ANGKASA), Universiti Kebangsaan Malaysia, Bangi Selangor 43600 (Malaysia); Department of Electrical, Electronic and System Engineering, Universiti Kebangsaan Malaysia, Bangi 43600 (Malaysia); Islam, M. T. [Institute of Space Science (ANGKASA), Universiti Kebangsaan Malaysia, Bangi Selangor 43600 (Malaysia)

    2013-11-25

    Design and analysis of a ceramic-filled bio-plastic composite sandwich structure is presented. This proposed high-dielectric structure is used as a substrate for patch antennas. A meandered-strip line-fed fractal-shape patch antenna is designed and fabricated on a copper-laminated sandwich-structured substrate. Measurement results of this antenna show 44% and 20% of bandwidths with maximum gains of 3.45 dBi and 5.87 dBi for the lower and upper bands, respectively. The half-power beam widths of 104° and 78° have been observed from the measured radiation pattern at the two resonance frequencies 0.9 GHz and 2.5 GHz.

  8. Comparison of wear and clinical performance between amalgam, composite and open sandwich restorations: 2-year results.

    Science.gov (United States)

    Sachdeo, A; Gray, Gordon B; Sulieman, M A; Jagger, Daryll C

    2004-03-01

    There has been some disquiet over the use of mercury containing restorative materials. The most commonly used alternative is composite resin but this has the potential disadvantage associated with wear and marginal leakage, which in turn, has proven to result in secondary caries and sensitivity. To overcome the shortcomings of a directly placed composite restoration, the glass-ionomer/composite open sandwich technique was introduced followed by the subsequent introduction of compomer systems. The aims of this study were to evaluate the wear and clinical performance of a control group of amalgam restorations compared with that of a group of posterior composite resin restorations fillings and a group of compomer/composite open sandwich restorations placed by a single general dental practitioner. The duration of the study was 2 years. One hundred and thirty three (71.4%) patients were successfully recalled and the wear and clinical performance of each restoration after 6, 12 and 24 months was measured, indirectly. There was no statistically significant difference recorded between the groups at 6 months or 1 year (p > 0.05). However, at the end of the 2-year study, there was a significantly lower rate of wear recorded for the control amalgam restorations compared with other two groups (p = 0.033). There was no statistically significant difference in wear recorded between the two groups of tooth-coloured restorations (p > 0.05). With regards to clinical performance of the restorations, occlusal and proximal contacts in each group of restoration remained satisfactory throughout the study.

  9. Vibroacoustic flexural properties of symmetric honeycomb sandwich panels with composite faces

    Science.gov (United States)

    Guillaumie, Laurent

    2015-05-01

    The vibroacoustic bending properties of honeycomb sandwich panels with composite faces are studied from the wavenumber modulus to the mechanical impedance, passing through the modal density. Numerical results extracted from finite element software computations are compared with analytical results. In both cases, the homogenization method is used to calculate the global properties of the sandwich panel. Since faces are made of composite material, the classical laminate theory serves as reference. With particular conditions used in the application for symmetric panels, the original orthotropic mechanical properties can be reduced simply to three parameters commonly used in vibroacoustic characterizations. These three parameters are the mass per unit area, the bending rigidity and the out-of-plane shear rigidity. They simultaneously govern the wavenumber modulus, the modal frequencies, the modal density and the mechanical impedance. For all of these vibroacoustic characterizations, a special frequency called the transition frequency separates two domains. In the first domain, below the transition frequency or for low frequencies, the orthotropic sandwich panel has a classical isotropic plate behavior. In the second domain, above the transition frequency or for high frequencies, the out-of-plane shear rigidity is very significant and changes the behavior. However, the results discussed are only valid up to a certain frequency which is determined by the thickness and out-of-plane shear stiffness of the honeycomb core, the thickness and the bending stiffness of the laminated face sheets and then the mass per unit area and bending stiffness of the total sandwich structure. All these parameters influence the final choice of model and simplifications presented. Experimental measurements of the bending wavenumber modulus and modal frequencies for our own application were carried out. In the vibroacoustic domain, the critical frequency is also an important frequency. It again

  10. Sandwich-Architectured Poly(lactic acid)-Graphene Composite Food Packaging Films.

    Science.gov (United States)

    Goh, Kunli; Heising, Jenneke K; Yuan, Yang; Karahan, Huseyin E; Wei, Li; Zhai, Shengli; Koh, Jia-Xuan; Htin, Nanda M; Zhang, Feimo; Wang, Rong; Fane, Anthony G; Dekker, Matthijs; Dehghani, Fariba; Chen, Yuan

    2016-04-20

    Biodegradable food packaging promises a more sustainable future. Among the many different biopolymers used, poly(lactic acid) (PLA) possesses the good mechanical property and cost-effectiveness necessary of a biodegradable food packaging. However, PLA food packaging suffers from poor water vapor and oxygen barrier properties compared to many petroleum-derived ones. A key challenge is, therefore, to simultaneously enhance both the water vapor and oxygen barrier properties of the PLA food packaging. To address this issue, we design a sandwich-architectured PLA-graphene composite film, which utilizes an impermeable reduced graphene oxide (rGO) as the core barrier and commercial PLA films as the outer protective encapsulation. The synergy between the barrier and the protective encapsulation results in a significant 87.6% reduction in the water vapor permeability. At the same time, the oxygen permeability is reduced by two orders of magnitude when evaluated under both dry and humid conditions. The excellent barrier properties can be attributed to the compact lamellar microstructure and the hydrophobicity of the rGO core barrier. Mechanistic analysis shows that the large rGO lateral dimension and the small interlayer spacing between the rGO sheets have created an extensive and tortuous diffusion pathway, which is up to 1450-times the thickness of the rGO barrier. In addition, the sandwiched architecture has imbued the PLA-rGO composite film with good processability, which increases the manageability of the film and its competency to be tailored. Simulations using the PLA-rGO composite food packaging film for edible oil and potato chips also exhibit at least eight-fold extension in the shelf life of these oxygen and moisture sensitive food products. Overall, these qualities have demonstrated the high potential of a sandwich-architectured PLA-graphene composite film for food packaging applications.

  11. In-situ observation of nucleated polymer crystallization in polyoxymethylene sandwich composites

    Directory of Open Access Journals (Sweden)

    Miroslav eSlouf

    2015-03-01

    Full Text Available We introduce a dynamic sandwich method, which can be used for in-situ observation and quantification of polymer crystallization nucleated by micro/nanoparticles. The method was applied on polyoxymethylene (POM composites with three nucleating agents: talc micropowder (POM/mTalc, chalk nanopowder (POM/nChalk and titanate nanotubes (POM/TiNT. The nucleating agents were deposited between polymer films, the resulting sandwich samples were consolidated by thermal treatment, and their microtomed cross-sections were observed during isothermal crystallization by polarized light microscopy. As the intensity of polarized light was shown to be proportional to the relative crystallinity, the PLM results could be fitted to Avrami equation and the nucleating activity of all investigated particles could be quantified by means of Avrami parameters (n, k. The crystallization half-times increased reproducibly in the following order: POM/nChalk < POM/mTalc < POM/TiNT ~ POM. For strong nucleating agents (mTalc, nChalk, the crystallization kinetics corresponded to spontaneous crystallization starting from central nucleating layer, which was verified by computer simulations. The results were also confirmed by DSC. We concluded that the sandwich method is an efficient microscopic technique for detailed evaluation of nucleating activity of arbitrary micro/nanoparticles in polymer systems.

  12. Evaluation of a Composite Sandwich Fuselage Side Panel with Damage and Subjected to Internal Pressure

    Science.gov (United States)

    Rouse, Marshall; Ambur, Damodar R.; Bodine, Jerry; Dopker, Bernhard

    1997-01-01

    The results from an experimental and analytical study of a composite sandwich fuselage side panel for a transport aircraft are presented. The panel has two window cutouts and three frames, and has been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on the graphite-epoxy sandwich panel with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. The two-frame panel was damaged by cutting a notch that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. The two panel configurations successfully satisfied all design load requirements in the experimental part of the study, and the three-frame and two-frame panel responses are fully explained by the analysis results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in.-wide frame spacing to further reduce aircraft fuselage structural weight.

  13. Modeling the Residual Strength of a Fibrous Composite Using the Residual Daniels Function

    Science.gov (United States)

    Paramonov, Yu.; Cimanis, V.; Varickis, S.; Kleinhofs, M.

    2016-09-01

    The concept of a residual Daniels function (RDF) is introduced. Together with the concept of Daniels sequence, the RDF is used for estimating the residual (after some preliminary fatigue loading) static strength of a unidirectional fibrous composite (UFC) and its S-N curve on the bases of test data. Usually, the residual strength is analyzed on the basis of a known S-N curve. In our work, an inverse approach is used: the S-N curve is derived from an analysis of the residual strength. This approach gives a good qualitive description of the process of decreasing residual strength and explanes the existence of the fatigue limit. The estimates of parameters of the corresponding regression model can be interpreted as estimates of parameters of the local strength of components of the UFC. In order to approach the quantitative experimental estimates of the fatigue life, some ideas based on the mathematics of the semiMarkovian process are employed. Satisfactory results in processing experimental data on the fatigue life and residual strength of glass/epoxy laminates are obtained.

  14. Moisture absorption and mechanical degradation studies of PMI foam cored fiber/epoxy resin sandwich composites

    Directory of Open Access Journals (Sweden)

    Liang Yin

    2015-04-01

    Full Text Available The present paper explores the result of hygrothermic aging of polymethacrylimide (PMI foam core sandwich composites immersed in different temperature deionized (DI and sea waters. The prepared specimens were tested for moisture up-take behavior and the resulting property degradation in terms of flexural and flat wise compressive strength. The results indicate that the saturated hygroscopic time of specimens immersed in low temperature water and high temperature water is about 480h and 720h, respectively. Due to the presence of ionic in sea water, the specimens immersed in sea water have higher compressive and flexural strength than specimens immersed in DI water.

  15. Multi-response parametric optimization in drilling of bamboo/Kevlar fiber reinforced sandwich composite

    Science.gov (United States)

    Singh, Thingujam Jackson; Samanta, Sutanu

    2016-09-01

    In the present work an attempt was made towards parametric optimization of drilling bamboo/Kevlar K29 fiber reinforced sandwich composite to minimize the delamination occurred during the drilling process and also to maximize the tensile strength of the drilled composite. The spindle speed and the feed rate of the drilling operation are taken as the input parameters. The influence of these parameters on delamination and tensile strength of the drilled composite studied and analysed using Taguchi GRA and ANOVA technique. The results show that both the response parameters i.e. delamination and tensile strength are more influenced by feed rate than spindle speed. The percentage contribution of feed rate and spindle speed on response parameters are 13.88% and 81.74% respectively.

  16. Characteristics of sandwich-type structural elements built of advanced composite materials from three dimensional fabrics

    Directory of Open Access Journals (Sweden)

    Castejón, L.

    1997-12-01

    Full Text Available Sandwich-type structures have proved to be alternatives of great success for several fields of application, and specially in the building sector. This is due to their outstanding properties of .specific rigidity and strength against bending loads and other range of advantages like fatigue and impact resistance, attainment of flat and smooth surfaces, high electric and thermal insulation, design versatility and some others. However, traditional sandwich structures present problems like their tendency towards delamination, stress concentrations in bores or screwed Joints, and pre resistance. These problems are alleviated thanks to the use of new sandwich structures built using three dimensional structures of advanced composite materials, maintaining the present advantages for more traditional sandwich structures. At this rate, these new structures can be applied in several areas where conventional sandwich structures used to be like walls, partitions, floor and ceiling structures, domes, vaults and dwellings, but with greater success.

    Las estructuras tipo sándwich han demostrado ser alternativas de gran éxito para diversos campos de aplicación y, en concreto, en el sector de la construcción, listo es gracias a sus excelentes propiedades de rigidez y resistencia específica frente a cargas de flexión y otra larga lista de ventajas, a la que pertenecen, por ejemplo, su buena resistencia a fatiga, resistencia al impacto, obtención de superficies lisas y suaves, elevado aislamiento térmico y eléctrico, versatilidad de diseño y otras. Sin embargo, las estructuras sándwich, tradicionales presentan una problemática consistente en su tendencia a la delaminación, concentraciones de tensiones ¿aparecidas ante la existencia de agujeros o uniones atornilladas y resistencia al fuego. Estos problemas son pifiados gracias a la aplicación de estructuras novedosas tipo sándwich, construidas a partir de tejidos tridimensionales de materiales

  17. Microstructural and compositional features of the fibrous and hyaline cartilage on the medial tibial plateau imply a unique role for the hopping locomotion of kangaroo

    National Research Council Canada - National Science Library

    He, Bo; Wu, Jian Ping; Xu, Jiake; Day, Robert E; Kirk, Thomas Brett

    2013-01-01

    .... However, the influences of the microstructure, composition and mechanical properties of the central fibrous and peripheral hyaline cartilage on the function of the knee joints are still to be defined...

  18. Sandwich-Like Graphite-Fullerene Composites with Enhanced Electromagnetic Wave Absorption

    Science.gov (United States)

    Zhong, Jiachun; Jia, Kun; Pu, Zejun; Liu, Xiaobo

    2016-11-01

    Sandwich-like graphite-fullerene composites have been prepared via a simple solution mixing/evaporation method. The complex relative permittivity and permeability of the graphite-fullerene composites in the frequency range from 0.5 GHz to 18 GHz were measured using a vector network analyzer with the reflection/transmission technique. Additionally, the microwave reflection loss of the composites was calculated using the obtained complex microwave electromagnetic parameters. It was found that the microwave loss peaks in the Ku band were dependent on the concentration of fullerene nanoparticles in the composites. Maximum reflection loss of -30 dB was observed between 2 GHz and 8 GHz when the graphite composites were doped with 1 wt.% fullerene. This absorption loss dropped (-24 dB) when the composite contained 3 wt.% fullerene. In addition, the electrical properties of the graphite were independent of the presence of fullerene in the composites. The tunable microwave reflection loss indicates that these graphite-fullerene composites show promise as wideband electromagnetic wave absorption materials.

  19. Tensile and Compressive Properties of Woven Kenaf/Glass Sandwich Hybrid Composites

    Directory of Open Access Journals (Sweden)

    Mohaiman J. Sharba

    2016-01-01

    Full Text Available Monotonic (tensile and compression properties of woven kenaf/glass reinforced unsaturated polyester sandwich hybrid composites have been experimentally investigated. Five types of composites laminates were fabricated using a combination of hand lay-up and cold press techniques, postcured for two hours at 80°C and left for 48 hours at room temperature. The hybrid composites contained fixed six layers of glass as a shell, three on each side, whereas the number of core kenaf layers was changed in three stages to get S1, S2, and S3 hybrid composites. Composites specimens with pure glass and kenaf were also fabricated for comparison. It was found that one kenaf layer replaced about 20% of total fiber weight fraction of the composite; this leads to reducing the density of final hybrid composite by 13%. Besides, in mechanical properties perspective, there are less than 1% reduction in compression strength and 40% in tensile strength when compared to pure glass composite. Generally, the results revealed that the best performance was observed in S1, which showed a good balance of all mechanical properties determined in this work.

  20. Design of Cellular Composite Sandwich Panels for Maximum Blast Resistance Via Energy Absorption

    Science.gov (United States)

    McConnell, Jennifer Righman; Su, Hong

    2016-06-01

    This paper presents a design methodology for optimizing the energy absorption under blast loads of cellular composite sandwich panels. A combination of dynamic finite element analysis (FEA) and simplified analytical modeling techniques are used. The analytical modeling calculates both the loading effects and structural response resulting from user-input charge sizes and standoff distances and offers the advantage of expediting iterative design processes. The FEA and the analytical model results are compared and contrasted then used to compare the energy response of various cellular composite sandwich panels under blast loads, where various core shapes and dimensions are the focus. As a result, it is concluded that the optimum shape consists of vertically-oriented webs while the optimum dimensions can be generally described as those which cause the most inelasticity without failure of the webs. These dimensions are also specifically quantified for select situations. This guidance is employed, along with the analytical method developed by the authors and considerations of the influences of material properties, to suggest a general design procedure that is a simple yet sufficiently accurate method for design. The suggested design approach is also demonstrated through a design example.

  1. Shape and Stress Sensing of Multilayered Composite and Sandwich Structures Using an Inverse Finite Element Method

    Science.gov (United States)

    Cerracchio, Priscilla; Gherlone, Marco; Di Sciuva, Marco; Tessler, Alexander

    2013-01-01

    The marked increase in the use of composite and sandwich material systems in aerospace, civil, and marine structures leads to the need for integrated Structural Health Management systems. A key capability to enable such systems is the real-time reconstruction of structural deformations, stresses, and failure criteria that are inferred from in-situ, discrete-location strain measurements. This technology is commonly referred to as shape- and stress-sensing. Presented herein is a computationally efficient shape- and stress-sensing methodology that is ideally suited for applications to laminated composite and sandwich structures. The new approach employs the inverse Finite Element Method (iFEM) as a general framework and the Refined Zigzag Theory (RZT) as the underlying plate theory. A three-node inverse plate finite element is formulated. The element formulation enables robust and efficient modeling of plate structures instrumented with strain sensors that have arbitrary positions. The methodology leads to a set of linear algebraic equations that are solved efficiently for the unknown nodal displacements. These displacements are then used at the finite element level to compute full-field strains, stresses, and failure criteria that are in turn used to assess structural integrity. Numerical results for multilayered, highly heterogeneous laminates demonstrate the unique capability of this new formulation for shape- and stress-sensing.

  2. Effect of temperature on the compressive behavior of carbon fiber composite pyramidal truss cores sandwich panels with reinforced frames

    Directory of Open Access Journals (Sweden)

    Xiaodong Li

    2016-03-01

    Full Text Available This paper focuses on the effect of temperature on the out-of-plane compressive properties and failure mechanism of carbon fiber/epoxy composite pyramidal truss cores sandwich panels (CF/CPTSP. CF/CPTSP with novel reinforced frames are manufactured by the water jet cutting and interlocking assembly method in this paper. The theoretical analysis is presented to predict the out-of-plane compressive stiffness and strength of CF/CPTSP at different ambient temperatures. The tests of composite sandwich panels are performed throughout the temperature range from −90∘C to 180∘C. Good agreement is found between theoretical predictions and experimental measurements. Experimental results indicate that the low temperature increases the compressive stiffness and strength of CF/CPTSP. However, the high temperature causes the degradation of the compressive stiffness and strength. Meanwhile, the effects of temperature on the failure mode of composite sandwich panels are also observed.

  3. Permeability and flammability study of composite sandwich structures for cryogenic applications

    Science.gov (United States)

    Bubacz, Monika

    Fiber reinforced plastics offer advantageous specific strength and stiffness compared to metals and has been identified as candidates for the reusable space transportation systems primary structures including cryogenic tanks. A number of carbon and aramid fiber reinforced plastics have been considered for the liquid hydrogen tanks. Materials selection is based upon mechanical properties and containment performance (long and short term) and upon manufacturing considerations. The liquid hydrogen tank carries shear, torque, end load, and bending moment due to gusts, maneuver, take-off, landing, lift, drag, and fuel sloshing. The tank is pressurized to about 1.5 atmosphere (14.6psi or 0.1 MPa) differential pressure and on ascent maintains the liquid hydrogen at a temperature of 20K. The objective of the research effort into lay the foundation for developing the technology required for reliable prediction of the effects of various design, manufacturing, and service parameters on the susceptibility of composite tanks to develop excessive permeability to cryogenic fuels. Efforts will be expended on developing the materials and structural concepts for the cryogenic tanks that can meet the functional requirements. This will include consideration for double wall composite sandwich structures, with inner wall to meet the cryogenic requirements. The structure will incorporate nanoparticles for properties modifications and developing barriers. The main effort will be extended to tank wall's internal skin design. The main requirements for internal composite stack are: (1) introduction of barrier film (e.g. honeycomb material paper sheet) to reduce the wall permeability to hydrogen, (2) introduction of nanoparticles into laminate resin to prevent micro-cracking or crack propagation. There is a need to characterize and analyze composite sandwich structural damage due to burning and explosion. Better understanding of the flammability and blast resistance of the composite structures

  4. Bio-composites fabricated by sandwiching sisal fibers with polypropylene (PP)

    Science.gov (United States)

    Sosiati, H.; Nahyudin, A.; Fauzi, I.; Wijayanti, D. A.; Triyana, K.

    2016-04-01

    Sisal fibers reinforced polypropylene (PP) composites were successfully fabricated using sandwiching sisal fibers with PP sheets. The ratio of fiber and polymer matrix was 50:50 (wt. %). Untreated short and long sisal fibers, and alkali treated short sisal fibers in 6% NaOH at 100°C for 1 and 3 h were used as reinforcement or fillers. A small amount (3 wt. %) of maleic anhydride grafted polypropylene (MAPP) was added as a coupling agent. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy were used to characterize the surface morphology and chemical composition of the fibers, respectively. Flexural test of sisal/PP composites was done according to ASTM D 790-02. The results showed that flexural strength of untreated long fiber reinforced composite is much higher than that of the untreated and alkali treated short fibers reinforced composites with and without the addition of MAPP. Alkalization related to fiber surface modification, fiber length/fiber orientation and a composite fabrication technique are important factors in contributing to the fiber distribution within the matrix, the bonding between the fiber and the matrix and the enhancement of flexural strength of the bio-composite.

  5. Fabrication and characterization of nano-fibrous bilayer composite for skin regeneration application.

    Science.gov (United States)

    Arasteh, Shaghayegh; Kazemnejad, Somaieh; Khanjani, Sayeh; Heidari-Vala, Hamed; Akhondi, Mohammad Mehdi; Mobini, Sahba

    2016-04-15

    Full thickness wound healing with minimal scarring and complete restoration of normal skin properties still remains as a clinical challenge. In this study, a bilayer skin substitute has been fabricated to biomimic the microstructure of natural extracellular matrix of the skin. Human amniotic membrane (HAM) and silk fibroin nano-fibers were combined to produce bilayer construct, which was further treated and characterized. HAM was obtained from healthy mothers and de-epithelized by means of fine enzymatic method to preserve the extracellular structure. Fibroin protein was extracted from fresh Bombyx mori cocoons and transformed to uniform nano-fiberous structure, which was used as a coating layer on the de-epithelized membrane. Surface modification through oxygen plasma treatment was attempted to further induce hydrophilicity. Subsequently, scaffolds were fully characterized in terms of morphology, mechanical properties, hydrophilicity and cell culture response. Histological and immunohistological staining demonstrated localization of fibronectin, cell denudation and structural integrity of HAM after de-epithelization. Scanning electron microscopy images showed bead-free silk fibroin nano-fibers with the average diameter of 250nm. Water contact angle of bilayer scaffolds reduced dramatically to 26.34° after oxygen plasma treatment, which is correlated with more hydrophilic surface. Due to fibroin nano-fiber coating, mechanical properties of HAM improved significantly. Tensile Young's modulus and tensile strength increased from 16.14MPa and 68.46MPa to 25.69MPa and 108.03MPa, respectively. 14days in vitro cultivation of mouse embryonic fibroblasts on the scaffolds revealed that bilayer scaffolds are able to support cell attachment and proliferation. Plasma-etched scaffolds provided the best niche for cell-matrix crosstalk by allowing cells to penetrate beneath the pores and to integrate in fibers direction. The obtained results suggest that the presented nano-fibrous

  6. Failure analysis of bolted joints in foam-core sandwich composites

    DEFF Research Database (Denmark)

    Zabihpoor, M.; Moslemian, Ramin; Afshin, M.

    2008-01-01

    This study represents an effort to predict the bearing strength, failure modes, and failure load of bolted joints in foam-core sandwich composites. The studied joints have been used in a light full composite airplane. By using solid laminates, a new design for the joint zone is developed....... These solid laminates include a number of glass plies with total thickness equal to core thickness. The effect of solid laminate size and interface angle of foam -solid laminate in the bonding zone on the bearing strength, failure loads and type of modes are investigated. The numerical study is performed...... using 3D FEM in ANSYS commercial code. Tsai-Wu failure criterion is used in the failure analysis. The results indicate that the most important parameter in the proposed joint zone design is the foam -solid laminate interface angle which plays an important role on the value of failure criterion (damage...

  7. Modelling the behaviour of composite sandwich structures when subject to air-blast loading

    Directory of Open Access Journals (Sweden)

    H Arora

    2016-09-01

    Full Text Available Large-scale glass fibre reinforced polymer (GFRP and carbon fibre reinforced polymer (CFRP sandwich structures (1.6 m x 1.3 m were subject to explosive air blast (100 kg TNT equivalent at stand-off distances of 14 m. Digital image correlation (DIC was used to obtain full-field data for the rear-face of each deforming target. A steel plate of comparable mass per unit area was also subjected to the same blast conditions for comparison. The experimental data was then verified with finite element models generated in Abaqus/Explicit. Close agreement was obtained between the numerical and experimental results, confirming that the CFRP panels had a superior blast performance to the GFRP panels. Moreover all composite targets sustained localised failures (that were more severe in the GFRP targets but retained their original shape post blast. The rear-skins remained intact for each composite target with core shear failure present.

  8. Transient response of isotropic, orthotropic and anisotropic composite-sandwich shells with the superparametric element

    Science.gov (United States)

    Mallikarjuna; Kant, T.; Fafard, M.

    1992-09-01

    The first-order Reissner-Mindlin shear deformation theory is employed to investigate the transient response of isotropic, layered orthotropic and anisotropic composite and sandwich shells. The eight-noded Serendipity and nine-noded Lagrangian quadrilateral superparametric shell elements are used. Numerical convergence and stability of the elements are established using an explicit central difference technique with a special mass matrix diagonalization scheme. The effects of transverse shear modulii of stiff layers, length/thickness and radius/length ratios, time step, finite element mesh, orientation of fibers and degree of orthotropy on the transient response of shells are studied. The variety of results presented here, based on realistic material properties of more commonly used advanced laminated composite shells, should serve as references for future investigations.

  9. A study of sandwich T-joints and composite lap joints

    Science.gov (United States)

    Turaga, Umamaheswar V. R. S.

    In this study, new efficient designs for adhesive sandwich T-joint and single-lap joint were proposed and investigated. In the proposed new sandwich T-joint, called U-channel joint, the load transfer path at the web-flange interface was modified to include a U-shaped aluminum channel which provides strong path for load transfer. Experimental results show that the new design has 62% more strength than the conventional circular fillet joint. The new U-channel joint was tested in tension, compression and bending to investigate its characteristics. It is found to have good performance in bending also, even though in compression it performs same as the circular fillet joint. An extensive parametric study was carried out to investigate the effect of parameters like flange skin stiffener, foam density, foam thickness in the web, and aluminum attachments. A fracture mechanics criterion based on the strain energy release rate was used to explain the failure modes, apart from the stress analysis explanation. The failure loads of the joints in compression were predicted using a maximum principal stress failure criterion based on the sandwich beam theory. A new single lap joint with attachments was proposed in the second phase of the research. The design was verified using both aluminum and composite materials. The new design was found to have 59% more strength than the single-lap joint. A parametric study was performed to find out the influence of the angle of attachment, thickness of attachment and the length of attachment. By careful consideration of design parameters, the joint can be optimized. Finally, the failure loads of the single lap joints with and without attachments were predicted using different failure criteria.

  10. The Application of Statistical Design of Experiments to Study the In-Plane Shear Behaviour of Hybrid Composite Sandwich Panel

    Directory of Open Access Journals (Sweden)

    Fajrin J.

    2016-03-01

    Full Text Available This paper presents a statistical aspect of experimental study on the in-plane shear behaviour of hybrid composite sandwich panel with intermediate layer. The study was aimed at providing information of how significant the contribution of intermediate layer to the in-plane shear behaviour of new developed sandwich panel. The investigation was designed as a single factor experimental design and the results were throughly analysed with statistics software; Minitab 15. The panels were tested by applying a tensile force along the diagonal of the test frame simulating pure shear using a 100 kN MTS servo-hydraulic UTM. The result shows that the incorporation of intermediate layer has sinificantly enhanced the in-plane shear behaviour of hybrid composite sandwich panel. The statistical analysis shows that the value of F0 is much higher than the value of Ftable, which has a meaning that the improvement provided by the incorporation of intermediate layer is statistically significant.

  11. Material Based Structure Design: Numerical Analysis Thermodynamic Response of Thermal Pyrolytic Graphite /Al Sandwich Composites

    Science.gov (United States)

    Wang, Junxia; Yan, Shilin; Yu, Dingshan

    2016-06-01

    Amine-grafted multiwalled carbon nanotubes (MWCNTs) based thermally conductive adhesive (TCA) was studied in the previous paper and applied here in thermal pyrolytic graphite (TPG)/Al radiator due to its high thermal conductivity, toughness and cohesiveness. In this paper, in an attempt to confirm the application of TCA to TPG/Al sandwich radiator, the thermodynamic response in TPG/Al sandwich composites associated with key material properties and structural design was investigated using finite element simulation with commercial available ANSYS software. The induced thermal stress in TCA layer is substantial due to the thermal expansion mismatch between Al plate and TPG. The maximum thermal stress is located near the edge of TCA layer with the von Mises stress value of 4.02 MPa and the shear stress value of 1.66 MPa. The reasonable adjustment of physical-mechanical properties including thermal conductivity, thermal expansion, Young,s modulus and the thickness of TCA layer, Al plate and TPG are beneficial for reducing the temperature of the top surface of the upper skin and their effects on the reduction of thermal structural response in some ways. These findings will highlight the structural optimization of TPG/Al radiator for future application.

  12. Material Based Structure Design: Numerical Analysis Thermodynamic Response of Thermal Pyrolytic Graphite /Al Sandwich Composites

    Science.gov (United States)

    Wang, Junxia; Yan, Shilin; Yu, Dingshan

    2016-12-01

    Amine-grafted multiwalled carbon nanotubes (MWCNTs) based thermally conductive adhesive (TCA) was studied in the previous paper and applied here in thermal pyrolytic graphite (TPG)/Al radiator due to its high thermal conductivity, toughness and cohesiveness. In this paper, in an attempt to confirm the application of TCA to TPG/Al sandwich radiator, the thermodynamic response in TPG/Al sandwich composites associated with key material properties and structural design was investigated using finite element simulation with commercial available ANSYS software. The induced thermal stress in TCA layer is substantial due to the thermal expansion mismatch between Al plate and TPG. The maximum thermal stress is located near the edge of TCA layer with the von Mises stress value of 4.02 MPa and the shear stress value of 1.66 MPa. The reasonable adjustment of physical-mechanical properties including thermal conductivity, thermal expansion, Young,s modulus and the thickness of TCA layer, Al plate and TPG are beneficial for reducing the temperature of the top surface of the upper skin and their effects on the reduction of thermal structural response in some ways. These findings will highlight the structural optimization of TPG/Al radiator for future application.

  13. Numerical analysis of the vacuum infusion process for sandwich composites with perforated core and different fiber orientations.

    OpenAIRE

    Hurtado Sánchez, Francisco José; Sánchez Kaiser, Antonio; Viedma Robles, Antonio; Díaz, Sebastián

    2016-01-01

    The vacuum infusion is a process usually applied to manufacture large structures of composite materials, such as wind turbine blades. The specific stiffness and weight ratio required by these structures can be achieved by manufacturing sandwich composites. The forecast by numerical simulation of the resin infusion flow is an indispensable tool to design and optimize the manufacturing process of composite. Present work analyzes by numerical simulation the mold filling process of...

  14. An efficient finite element with layerwise mechanics for smart piezoelectric composite and sandwich shallow shells

    Science.gov (United States)

    Yasin, M. Yaqoob; Kapuria, S.

    2014-01-01

    In this work, we present a new efficient four-node finite element for shallow multilayered piezoelectric shells, considering layerwise mechanics and electromechanical coupling. The laminate mechanics is based on the zigzag theory that has only seven kinematic degrees of freedom per node. The normal deformation of the piezoelectric layers under the electric field is accounted for without introducing any additional deflection variables. A consistent quadratic variation of the electric potential across the piezoelectric layers with the provision of satisfying the equipotential condition of electroded surfaces is adopted. The performance of the new element is demonstrated for the static response under mechanical and electric potential loads, and for free vibration response of smart shells under different boundary conditions. The predictions are found to be very close to the three dimensional piezoelasticity solutions for hybrid shells made of not only single-material composite substrates, but also sandwich substrates with a soft core for which the equivalent single layer (ESL) theories perform very badly.

  15. LOSS FACTOR AND DYNAMIC YOUNG MODULUS DETERMINATION FOR COMPOSITE SANDWICH BARS REINFORCED WITH STEEL FABRIC

    Directory of Open Access Journals (Sweden)

    Cosmin-Mihai MIRIŢOIU

    2015-05-01

    Full Text Available In this paper I have build some composite sandwich bars. For these bars I have determined the dynamic response by recording their free vibrations. These bars have the core made of polypropylene honeycomb with upper and lower layers reinforced with steel wire mesh. For these bars I have determined the the eigenfrequency of the first eigenmode in this way: the bar was embedded at one end and free at the other where there was placed an accelerometer at 10 mm distance from the edge and I applied an initial force at the free end. I have determined the eigenfrequency because I will use its values for the loss factor and dynamic Young modulus determination.

  16. Damage Characteristics and Residual Strength of Composite Sandwich Panels Impacted with and Without Compression Loading

    Science.gov (United States)

    McGowan, David M.; Ambur, Damodar R.

    1998-01-01

    The results of an experimental study of the impact damage characteristics and residual strength of composite sandwich panels impacted with and without a compression loading are presented. Results of impact damage screening tests conducted to identify the impact-energy levels at which damage initiates and at which barely visible impact damage occurs in the impacted facesheet are discussed. Parametric effects studied in these tests include the impactor diameter, dropped-weight versus airgun-launched impactors, and the effect of the location of the impact site with respect to the panel boundaries. Residual strength results of panels tested in compression after impact are presented and compared with results of panels that are subjected to a compressive preload prior to being impacted.

  17. Probabilistic fatigue life of balsa cored sandwich composites subjected to transverse shear

    DEFF Research Database (Denmark)

    Dimitrov, Nikolay Krasimirov; Berggreen, Christian

    2015-01-01

    be controlled to the same extent as an industrial manufacturing processes. The large variance in the probabilistic model for fatigue life is reflected in the corresponding calibrated partial safety factors, which are higher thanthe factors usually associated with synthetic materials such as fiber......A probabilistic fatigue life model for end-grain balsa cored sandwich composites subjectedto transverse shear is proposed. The model is calibrated to measured three-pointbending constant-amplitude fatigue test data using the maximum likelihood method. Some possible applications of the probabilistic...... model are obtaining characteristic S–Ncurves corresponding to a given survival probability, and calibrating partial safety factorsfor material fatigue. The latter is demonstrated by a calibration performed using reliability analysis with the first-order reliability method. The measured variance in balsa...

  18. A New Method with Sandwiched Composite Films for Encapsulating Flexible OLEDs

    Institute of Scientific and Technical Information of China (English)

    LI Yang; WANG Li-Duo; DUAN Lian; QIU Yong

    2005-01-01

    @@ We introduce a novel method for sandwiched-composite-film encapsulation that successfully extends the lifetime of flexible organic light-emitting diodes (FOLEDs). The encapsulation layers include two parts: one is a thin multilayer barrier coating, which is made up of two applications of alternating layers composed of a polymer layer (consisting of UV capable resins) and a ceramic layer (consisting of titanium nitride with excellent barrier performance), and the other is a thick polymer film of approximately 70μm in thickness fabricated by a doctor blade onto the thin encapsulation film described above. FOLEDs encapsulated by this novel method have a longer lifetime, and this lifetime is 74 times as much as the lifetime of unencapsulated ones.

  19. Damage Evolution in Composite Materials and Sandwich Structures Under Impulse Loading

    Science.gov (United States)

    Silva, Michael Lee

    Damage evolution in composite materials is a rather complex phenomenon. There are numerous failure modes in composite materials stemming from the interaction of the various constituent materials and the particular loading conditions. This thesis is concerned with investigating damage evolution in sandwich structures under repeated transient loading conditions associated with impulse loading due to hull slamming of high-speed marine craft. To fully understand the complex stress interactions, a full field technique to reveal stress or strain is required. Several full field techniques exist but are limited to materials with particular optical properties. A full field technique applicable to most materials is known as thermoelastic stress analysis (TSA) and reveals the variation in sum of principal stresses of a cyclically loaded sample by correlating the stresses to a small temperature change occurring at the loading frequency. Digital image correlation (DIC) is another noncontact full field technique that reveals the deformation field by tracking the motion of subsets of a random speckle pattern during the loading cycles. A novel experimental technique to aid in the study of damage progression that combines TSA and DIC simultaneously utilizing a single infrared camera is presented in this thesis. A technique to reliably perform DIC with an infrared (IR) camera is developed utilizing variable emissivity paint. The thermal data can then be corrected for rigid-body motion and deformation such that each pixel represents the same material point in all frames. TSA is then performed on this corrected data, reducing motion blur and increasing accuracy. This combined method with a single infrared camera has several advantages, including a straightforward experimental setup without the need to correct for geometric effects of two spatially separate cameras. Additionally, there is no need for external lighting in TSA as the measured electromagnetic radiation is emitted by the

  20. Efficacy of four lining materials in sandwich technique to reduce microleakage in class II composite resin restorations.

    Science.gov (United States)

    Moazzami, S M; Sarabi, N; Hajizadeh, H; Majidinia, S; Li, Y; Meharry, M R; Shahrokh, H

    2014-01-01

    The aim of the present study was to evaluate the effect of four different sandwich techniques on gingival microleakage of Class II direct composite resin restorations. Fifty sound human premolars were selected and randomly divided into five groups (n=10). Class II box only cavities were prepared in one of the proximal surfaces of each tooth with a gingival margin located approximately 0.5 mm below the cemento-enamel junction. Group A (control) was restored incrementally with composite resin (Tetric Ceram). Groups B, C, D, and E were restored with the sandwich technique using a compomer (Compoglass F), flowable composite resin (Tetric Flow), self-cure composite resin (Degufill SC), or resin modified glass ionomer (Fuji II LC), respectively. After thermal-load cycling, the specimens were immersed in 0.5% basic fuschin for 24 hours. Dye penetration (10(-1) mm) was detected using a sectioning technique. Data were analyzed with repeated measurements and Duncan test at α=0.05. The least amount of microleakage was detected in the incremental group (1.28 ± 0.98). The sandwich technique using resin modified glass ionomer (7.99 ± 9.57) or compomer (4.36 ± 1.78) resulted in significantly more leakage than did the sandwich technique using flowable (1.50 ± 1.97) or self-cure composite (2.26 ± 1.52). According to the results of this study, none of the four sandwich technique composite resin restorations used in this study could reduce gingival microleakage to a greater degree than the incremental technique.

  1. Multi-porous electroactive poly(L-lactic acid)/polypyrrole composite micro/nano fibrous scaffolds promote neurite outgrowth in PC12 cells☆

    OpenAIRE

    Yu, Qiaozhen; Xu, Shuiling; Zhang, Kuihua; Shan, Yongming

    2013-01-01

    In this study, poly(L-lactic acid)/ammonium persulfate doped-polypyrrole composite fibrous scaffolds with moderate conductivity were produced by combining electrospinning with in situ polymerization. PC12 cells were cultured on these fibrous scaffolds and their growth following electrical stimulation (0–20.0 μA stimulus intensity, for 1–4 days) was observed using inverted light microscopy, and scanning electron microscopy coupled with the MTT cell viability test. The results demonstrated that...

  2. Composite Behavior of Insulated Concrete Sandwich Wall Panels Subjected to Wind Pressure and Suction

    Directory of Open Access Journals (Sweden)

    Insub Choi

    2015-03-01

    Full Text Available A full-scale experimental test was conducted to analyze the composite behavior of insulated concrete sandwich wall panels (ICSWPs subjected to wind pressure and suction. The experimental program was composed of three groups of ICSWP specimens, each with a different type of insulation and number of glass-fiber-reinforced polymer (GFRP shear grids. The degree of composite action of each specimen was analyzed according to the load direction, type of the insulation, and number of GFRP shear grids by comparing the theoretical and experimental values. The failure modes of the ICSWPs were compared to investigate the effect of bonds according to the load direction and type of insulation. Bonds based on insulation absorptiveness were effective to result in the composite behavior of ICSWP under positive loading tests only, while bonds based on insulation surface roughness were effective under both positive and negative loading tests. Therefore, the composite behavior based on surface roughness can be applied to the calculation of the design strength of ICSWPs with continuous GFRP shear connectors.

  3. Composite Behavior of Insulated Concrete Sandwich Wall Panels Subjected to Wind Pressure and Suction

    Science.gov (United States)

    Choi, Insub; Kim, JunHee; Kim, Ho-Ryong

    2015-01-01

    A full-scale experimental test was conducted to analyze the composite behavior of insulated concrete sandwich wall panels (ICSWPs) subjected to wind pressure and suction. The experimental program was composed of three groups of ICSWP specimens, each with a different type of insulation and number of glass-fiber-reinforced polymer (GFRP) shear grids. The degree of composite action of each specimen was analyzed according to the load direction, type of the insulation, and number of GFRP shear grids by comparing the theoretical and experimental values. The failure modes of the ICSWPs were compared to investigate the effect of bonds according to the load direction and type of insulation. Bonds based on insulation absorptiveness were effective to result in the composite behavior of ICSWP under positive loading tests only, while bonds based on insulation surface roughness were effective under both positive and negative loading tests. Therefore, the composite behavior based on surface roughness can be applied to the calculation of the design strength of ICSWPs with continuous GFRP shear connectors. PMID:28788001

  4. Manifestation of the shape-memory effect in polyetherurethane cellular plastics, fabric composites, and sandwich structures under microgravity

    Science.gov (United States)

    Babaevskii, P. G.; Kozlov, N. A.; Agapov, I. G.; Reznichenko, G. M.; Churilo, N. V.; Churilo, I. V.

    2016-09-01

    The results of experiments that were performed to test the feasibility of creating sandwich structures (consisting of thin-layer sheaths of polymer composites and a cellular polymer core) with the shapememory effect as models of the transformable components of space structures have been given. The data obtained indicate that samples of sandwich structures under microgravity conditions on board the International Space Station have recovered their shape to almost the same degree as under terrestrial conditions, which makes it possible to recommend them for creating components of transformable space structures on their basis.

  5. Silk fibroin/sodium alginate composite nano-fibrous scaffold prepared through thermally induced phase-separation (TIPS) method for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Haiping, E-mail: zhp9810_a@163.com; Liu, Xiaotian, E-mail: xtianliu@126.com; Yang, Mingying, E-mail: yangm@zju.edu.cn; Zhu, Liangjun, E-mail: ljzhu@zju.edu.cn

    2015-10-01

    To mimic the natural fibrous structure of the tissue extracellular matrix, a nano-fibrous silk fibroin (SF)/sodium alginate (SA) composite scaffold was fabricated by a thermally-induced phase-separation method. The effects of SF/SA ratio on the structure and the porosity of the composite scaffolds were examined. Scanning electron microscopy and porosity results showed that the 5SF/1SA and 3SF/1SA scaffolds possessed an excellent nano-fibrous structure and a porosity of more than 90%. Fourier transform infrared, X-ray diffraction, and differential scanning calorimetry results indicated the physical interaction between SF and SA molecules and their good compatibility in the 5SF/1SA and 3SF/1SA scaffolds, whereas they showed less compatibility in the 1SF/1SA scaffold. Cell culture results showed that MG-63 cells can attach and grow well on the surface of the SF/SA scaffolds. The nano-fibrous SF/SA scaffold can be potentially used in tissue engineering. - Highlights: • We fabricate a nano-fibrous silk fibroin (SF)/sodium alginate (SA) composite scaffold. • The scaffold was prepared through a thermally induced phase separation method. • SF molecules are physically interacted with SA molecules. • Good molecular compatibility can be found in 5SF/1SA and 3SF/1SA scaffolds. • The nano-fibrous SF/SA scaffold is biocompatible.

  6. Efficient and versatile fibrous adsorbent based on magnetic amphiphilic composites of chrysotile/carbon nanostructures for the removal of ethynilestradiol.

    Science.gov (United States)

    Teixeira, Ana Paula C; Purceno, Aluir D; de Paula, Camila C A; da Silva, Julio César C; Ardisson, José D; Lago, Rochel M

    2013-03-15

    In this work, chrysotile was used as support to grow carbon nanotubes and nanofibers to produce fibrous amphiphilic magnetic nanostructured composites. Iron impregnated on the chrysotile surface at 1, 5 and 15 wt% was used as catalyst to grow carbon nanostructures by CVD (chemical vapor deposition) with ethanol at 800°C. Raman, TG/DTA, Mössbauer, XRD, BET, SEM, TEM, elemental analyses and contact angle measurements suggested the formation of a complex amphiphilic material containing up to 21% of nanostructured hydrophobic carbon supported on hydrophilic Mg silicate fibers with magnetic Fe cores protected by carbon coating. Adsorption tests for the hormone ethynilestradiol (EE), a hazardous water contaminant, showed remarkable adsorption capacities even compared to high surface area activated carbon and multiwall carbon nanotubes. These results are discussed in terms of the hydrophobic surface of the carbon nanotubes and nanofibers completely exposed and accessible for the adsorption of the EE molecules combined with the hydrophilic Mg silicate surface which allows good dispersion in water. The composites are magnetic and after adsorption the dispersed particles can be removed by a simple magnetic process. Moreover, the fibrous composites can be conformed as threads, screens and pellets to produce different filtering media.

  7. Determination of arsenate in water by anion selective membrane electrode using polyurethane–silica gel fibrous anion exchanger composite

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Asif Ali, E-mail: asifkhan42003@yahoo.com; Shaheen, Shakeeba, E-mail: shakeebashaheen@ymail.com

    2014-01-15

    Highlights: • PU–Si gel is new anion exchanger material synthesized and characterized. • This material used as anion exchange membrane is applied for electroanalytical studies. • The method for detection and determination of AsO{sub 4}{sup 3−} in traces amounts discussed. • The results are also verified from arsenic analyzer. -- Abstract: Polyurethane (PU)–silica (Si gel) based fibrous anion exchanger composites were prepared by solid–gel polymerization of polyurethane in the presence of different amounts of silica gel. The formation of PU–Si gel fibrous anion exchanger composite was characterized by Fourier transform infra-red spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTA), scanning electron microscopy (SEM) and elemental analysis. The membrane having a composition of 5:3 (PU:Si gel) shows best results for water content, porosity, thickness and swelling. Our studies show that the present ion selective membrane electrode is selective for arsenic, having detection limit (1 × 10{sup −8} M to 1 × 10{sup −1} M), response time (45 s) and working pH range (5–8). The selectivity coefficient values for interfering ions indicate good selectivity for arsenate (AsO{sub 4}{sup 3−}) over interfering anions. The accuracy of the detection limit results was compared by PCA-Arsenomat.

  8. Determination of arsenate in water by anion selective membrane electrode using polyurethane-silica gel fibrous anion exchanger composite.

    Science.gov (United States)

    Khan, Asif Ali; Shaheen, Shakeeba

    2014-01-15

    Polyurethane (PU)-silica (Si gel) based fibrous anion exchanger composites were prepared by solid-gel polymerization of polyurethane in the presence of different amounts of silica gel. The formation of PU-Si gel fibrous anion exchanger composite was characterized by Fourier transform infra-red spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTA), scanning electron microscopy (SEM) and elemental analysis. The membrane having a composition of 5:3 (PU:Si gel) shows best results for water content, porosity, thickness and swelling. Our studies show that the present ion selective membrane electrode is selective for arsenic, having detection limit (1×10(-8)M to 1×10(-1)M), response time (45s) and working pH range (5-8). The selectivity coefficient values for interfering ions indicate good selectivity for arsenate (AsO4(3-)) over interfering anions. The accuracy of the detection limit results was compared by PCA-Arsenomat.

  9. Robust optical properties of sandwiched lateral composition modulation GaInP structure grown by molecular beam epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kwangwook; Kang, Seokjin; Ravindran, Sooraj; Min, Jung-Wook; Hwang, Hyeong-Yong; Jho, Young-Dahl; Lee, Yong Tak

    2016-12-26

    Double-hetero structure lateral composition modulated (LCM) GaInP and sandwiched LCM GaInP having the same active layer thickness were grown and their optical properties were compared. Sandwiched LCM GaInP showed robust optical properties due to periodic potential nature of the LCM structure, and the periodicity was undistorted even for thickness far beyond the critical layer thickness. A thick LCM GaInP structure with undistorted potential that could preserve the properties of native LCM structure was possible by stacking thin LCM GaInP structures interspaced with strain compensating GaInP layers. The sandwiched structure could be beneficial in realizing the LCM structure embedded high efficiency solar cells.

  10. Standard practice for radiologic examination of flat panel composites and sandwich core materials used in aerospace applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice is intended to be used as a supplement to Practices E 1742, E 1255, and E 2033. 1.2 This practice describes procedures for radiologic examination of flat panel composites and sandwich core materials made entirely or in part from fiber-reinforced polymer matrix composites. Radiologic examination is: a) radiographic (RT) with film, b) Computed Radiography (CR) with Imaging Plate, c) Digital Radiology (DR) with Digital Detector Array’s (DDA), and d) Radioscopic (RTR) Real Time Radiology with a detection system such as an Image Intensifier. The composite materials under consideration typically contain continuous high modulus fibers (> 20 GPa), such as those listed in 1.4. 1.3 This practice describes established radiological examination methods that are currently used by industry that have demonstrated utility in quality assurance of flat panel composites and sandwich core materials during product process design and optimization, process control, after manufacture inspection, in service exami...

  11. Application of the finite-element method to improve the quasi-exact reinforcement theory of fibrous polymeric composites

    Science.gov (United States)

    Klasztorny, M.; Urbanski, A.

    2005-01-01

    In the paper, the WL quasi-exact reinforcement theory of fibrous polymeric composites is improved. An optimum compatibility condition related to the transverse shear problem for a unit cell, which brings solutions closest to reality, is derived. This condition is formulated in the form of a linear combination of maximum radial and circumferential displacements. Optimum coefficients of this combination are determined by comparing analytical and numerical solutions for a test specimen in the form of a rectangular thin plate, which is in a plane strain state and is subject to selected loading schemes. The analytic solutions are obtained for a homogenized material by using the WL reinforcement theory. The numerical solutions are found for an actual heterogeneous composite material by using the finite-element method, and they verify the WL reinforcement theory, in particular, the admissibility of Hill's assumption. An analysis performed for two composite materials shows that the improved WL reinforcement theory gives adequate displacement fields.

  12. AN ANISOTROPIC NANOFIBER/MICROSPHERE COMPOSITE WITH CONTROLLED RELEASE OF BIOMOLECULES FOR FIBROUS TISSUE ENGINEERING

    OpenAIRE

    Ionescu, Lara C.; Lee, Gregory C.; Sennett, Brian J.; Burdick, Jason A.; Mauck, Robert L.

    2010-01-01

    Aligned nanofibrous scaffolds can recapitulate the structural hierarchy of fiber-reinforced tissues of the musculoskeletal system. While these electrospun fibrous scaffolds provide physical cues that can direct tissue formation when seeded with cells, the ability to chemically guide a population of cells, without disrupting scaffold mechanical properties, would improve the maturation of such constructs and add additional functionality to the system both in vitro and in vivo. In this study, we...

  13. Effects of Subzero Temperatures and Sea Water Immersion on Damage Initiation and Growth in Sandwich Composites

    Science.gov (United States)

    2008-12-10

    single cantilever beam sandwich test. The TSD is perhaps 19 An improved methodology for measuring the interracial toughness of sandwich beams 3...measuring the interracial toughness of sandwich beams 5 Table 4.1. Material properties Glass face Glass face Carbon „ , ,, Loading L...which shows the relationship between reaction forces for an MSCB specimen with 12 ply glass face sheets at different crack lengths. It is observed

  14. Bile canaliculi formation and biliary transport in 3D sandwich-cultured hepatocytes in dependence of the extracellular matrix composition.

    Science.gov (United States)

    Deharde, Daniela; Schneider, Christin; Hiller, Thomas; Fischer, Nicolas; Kegel, Victoria; Lübberstedt, Marc; Freyer, Nora; Hengstler, Jan G; Andersson, Tommy B; Seehofer, Daniel; Pratschke, Johann; Zeilinger, Katrin; Damm, Georg

    2016-10-01

    Primary human hepatocytes (PHH) are still considered as gold standard for investigation of in vitro metabolism and hepatotoxicity in pharmaceutical research. It has been shown that the three-dimensional (3D) cultivation of PHH in a sandwich configuration between two layers of extracellular matrix (ECM) enables the hepatocytes to adhere three dimensionally leading to formation of in vivo like cell-cell contacts and cell-matrix interactions. The aim of the present study was to investigate the influence of different ECM compositions on morphology, cellular arrangement and bile canaliculi formation as well as bile excretion processes in PHH sandwich cultures systematically. Freshly isolated PHH were cultured for 6 days between two ECM layers made of collagen and/or Matrigel in four different combinations. The cultures were investigated by phase contrast microscopy and immunofluorescence analysis with respect to cell-cell connections, repolarization as well as bile canaliculi formation. The influence of the ECM composition on cell activity and viability was measured using the XTT assay and a fluorescent dead or alive assay. Finally, the bile canalicular transport was analyzed by live cell imaging to monitor the secretion and accumulation of the fluorescent substance CDF in bile canaliculi. Using collagen and Matrigel in different compositions in sandwich cultures of hepatocytes, we observed differences in morphology, cellular arrangement and cell activity of PHH in dependence of the ECM composition. Sandwich-cultured hepatocytes with an underlay of collagen seem to represent the best in vivo tissue architecture in terms of formation of trabecular cell arrangement. Cultures overlaid with collagen were characterized by the formation of abundant bile canaliculi, while the bile canaliculi network in hepatocytes cultured on a layer of Matrigel and overlaid with collagen showed the most branched and stable canalicular network. All cultures showed a time-dependent leakage of

  15. Microstructural and compositional features of the fibrous and hyaline cartilage on the medial tibial plateau imply a unique role for the hopping locomotion of kangaroo.

    Directory of Open Access Journals (Sweden)

    Bo He

    Full Text Available Hopping provides efficient and energy saving locomotion for kangaroos, but it results in great forces in the knee joints. A previous study has suggested that a unique fibrous cartilage in the central region of the tibial cartilage could serve to decrease the peak stresses generated within kangaroo tibiofemoral joints. However, the influences of the microstructure, composition and mechanical properties of the central fibrous and peripheral hyaline cartilage on the function of the knee joints are still to be defined. The present study showed that the fibrous cartilage was thicker and had a lower chondrocyte density than the hyaline cartilage. Despite having a higher PG content in the middle and deep zones, the fibrous cartilage had an inferior compressive strength compared to the peripheral hyaline cartilage. The fibrous cartilage had a complex three dimensional collagen meshwork with collagen bundles parallel to the surface in the superficial zone, and with collagen bundles both parallel and perpendicular to the surface in the middle and deep zones. The collagen in the hyaline cartilage displayed a typical Benninghoff structure, with collagen fibres parallel to the surface in the superficial zone and collagen fibres perpendicular to the surface in the deep zone. Elastin fibres were found throughout the entire tissue depth of the fibrous cartilage and displayed a similar alignment to the adjacent collagen bundles. In comparison, the elastin fibres in the hyaline cartilage were confined within the superficial zone. This study examined for the first time the fibrillary structure, PG content and compressive properties of the central fibrous cartilage pad and peripheral hyaline cartilage within the kangaroo medial tibial plateau. It provided insights into the microstructure and composition of the fibrous and peripheral hyaline cartilage in relation to the unique mechanical properties of the tissues to provide for the normal activities of kangaroos.

  16. Microstructural and compositional features of the fibrous and hyaline cartilage on the medial tibial plateau imply a unique role for the hopping locomotion of kangaroo.

    Science.gov (United States)

    He, Bo; Wu, Jian Ping; Xu, Jiake; Day, Robert E; Kirk, Thomas Brett

    2013-01-01

    Hopping provides efficient and energy saving locomotion for kangaroos, but it results in great forces in the knee joints. A previous study has suggested that a unique fibrous cartilage in the central region of the tibial cartilage could serve to decrease the peak stresses generated within kangaroo tibiofemoral joints. However, the influences of the microstructure, composition and mechanical properties of the central fibrous and peripheral hyaline cartilage on the function of the knee joints are still to be defined. The present study showed that the fibrous cartilage was thicker and had a lower chondrocyte density than the hyaline cartilage. Despite having a higher PG content in the middle and deep zones, the fibrous cartilage had an inferior compressive strength compared to the peripheral hyaline cartilage. The fibrous cartilage had a complex three dimensional collagen meshwork with collagen bundles parallel to the surface in the superficial zone, and with collagen bundles both parallel and perpendicular to the surface in the middle and deep zones. The collagen in the hyaline cartilage displayed a typical Benninghoff structure, with collagen fibres parallel to the surface in the superficial zone and collagen fibres perpendicular to the surface in the deep zone. Elastin fibres were found throughout the entire tissue depth of the fibrous cartilage and displayed a similar alignment to the adjacent collagen bundles. In comparison, the elastin fibres in the hyaline cartilage were confined within the superficial zone. This study examined for the first time the fibrillary structure, PG content and compressive properties of the central fibrous cartilage pad and peripheral hyaline cartilage within the kangaroo medial tibial plateau. It provided insights into the microstructure and composition of the fibrous and peripheral hyaline cartilage in relation to the unique mechanical properties of the tissues to provide for the normal activities of kangaroos.

  17. NONLINEAR BUCKLING BEHAVIOR OF DAMAGED COMPOSITE SANDWICH PLATES CONSIDERING THE EFFECT OF TEMPERATURE-DEPENDENT THERMAL AND MECHANICAL PROPERTIES

    Institute of Scientific and Technical Information of China (English)

    Bai Ruixiang; Chen Haoran

    2001-01-01

    On the basis of the first-order shear deformation plate theory and the zig-zag deformation assumption, an incremental finite element formulation for nonlinear buckling analysis of the composite sandwich plate is deduced and the temperature-dependent thermal and mechanical properties of composite is considered. A finite element method for thermal or thermo-mechanical coupling nonlinear buckling analysis of the composite sandwich plate with an interfacial crack damage between face and core is also developed. Numerical results and discussions concerning some typical examples show that the effects of the variation of the thermal and mechanical properties with temperature, extermal compressive loading, size of the damage zone and piy angle of the faces on the thermal buckling behavior are significant.

  18. Evaluation of Composite Honeycomb Sandwich Panels Under Compressive Loads at Elevated Temperatures

    Science.gov (United States)

    Walker, Sandra P.

    1998-01-01

    Fourteen composite honeycomb sandwich panels were tested to failure under compressive loading. The test specimens included panels with both 8 and 24-ply graphite-bismaleimide composite facesheets and both titanium and graphite-polyimide core materials. The panels were designed to have the load introduced through fasteners attached to pairs of steel angles on the ends of the panels to simulate double shear splice joints. The unloaded edges were unconstrained. Test temperatures included room temperature, 250F, and 300F. For the room and 250F temperature tests, the 24-ply specimen failure strains were close to the unnotched allowable strain values and failure loads were well above the design loads. However, failure strains much lower than the unnotched allowable strain values, and failure loads below the design loads were observed with several of the 8-ply specimens. For each individual test temperature, large variations in the failure strains and loads were observed for the 8-ply specimens. Dramatic decreases in the failure strains and loads were observed for the 24-ply specimens as the test temperature was increased from 250F to 300F. All 8-ply specimens appeared to have failed in a facesheet strength failure mode for all test temperatures. The 24-ply specimens displayed appreciably greater amounts of bending prior to failure than the 8-ply specimens, and panel buckling occurred prior to facesheet strength failure for the 24-ply room and 250F temperature tests.

  19. Refinement of Timoshenko Beam Theory for Composite and Sandwich Beams Using Zigzag Kinematics

    Science.gov (United States)

    Tessler, Alexander; DiSciuva, Marco; Gherlone, Marco

    2007-01-01

    A new refined theory for laminated-composite and sandwich beams that contains the kinematics of the Timoshenko Beam Theory as a proper baseline subset is presented. This variationally consistent theory is derived from the virtual work principle and employs a novel piecewise linear zigzag function that provides a more realistic representation of the deformation states of transverse shear flexible beams than other similar theories. This new zigzag function is unique in that it vanishes at the top and bottom bounding surfaces of a beam. The formulation does not enforce continuity of the transverse shear stress across the beam s cross-section, yet is robust. Two major shortcomings that are inherent in the previous zigzag theories, shear-force inconsistency and difficulties in simulating clamped boundary conditions, and that have greatly limited the utility of these previous theories are discussed in detail. An approach that has successfully resolved these shortcomings is presented herein. This new theory can be readily extended to plate and shell structures, and should be useful for obtaining accurate estimates of structural response of laminated composites.

  20. Sandwich construction

    Science.gov (United States)

    Marshall, A.

    A form of composites known as structural sandwich construction is presented in terms of materials used, design details for solving edging and attachment problems, and charts of design material analysis. Sandwich construction is used in nearly all commercial airliners and helicopters, and military air and space vehicles, and it is shown that this method can stiffen a structure without causing a weight increase. The facing material can be made of 2024 or 7075 aluminum alloy, titanium, or stainless steel, and the core material can be wood or foam. The properties of paper honeycomb and various aluminum alloy honeycombs are presented. Factors pertaining to adhesive materials are discussed, including products given off during cure, bonding pressure, and adaptability. Design requirements and manufacturing specifications are resolved using numerous suggestions.

  1. Fabrication and Testing of Durable Redundant and Fluted-Core Joints for Composite Sandwich Structures

    Science.gov (United States)

    Lin, Shih-Yung; Splinter, Scott C.; Tarkenton, Chris; Paddock, David A.; Smeltzer, Stanley S.; Ghose, Sayata; Guzman, Juan C.; Stukus, Donald J.; McCarville, Douglas A.

    2013-01-01

    The development of durable bonded joint technology for assembling composite structures is an essential component of future space technologies. While NASA is working toward providing an entirely new capability for human space exploration beyond low Earth orbit, the objective of this project is to design, fabricate, analyze, and test a NASA patented durable redundant joint (DRJ) and a NASA/Boeing co-designed fluted-core joint (FCJ). The potential applications include a wide range of sandwich structures for NASA's future launch vehicles. Three types of joints were studied -- splice joint (SJ, as baseline), DRJ, and FCJ. Tests included tension, after-impact tension, and compression. Teflon strips were used at the joint area to increase failure strength by shifting stress concentration to a less sensitive area. Test results were compared to those of pristine coupons fabricated utilizing the same methods. Tensile test results indicated that the DRJ design was stiffer, stronger, and more impact resistant than other designs. The drawbacks of the DRJ design were extra mass and complex fabrication processes. The FCJ was lighter than the DRJ but less impact resistant. With barely visible but detectable impact damages, all three joints showed no sign of tensile strength reduction. No compression test was conducted on any impact-damaged sample due to limited scope and resource. Failure modes and damage propagation were also studied to support progressive damage modeling of the SJ and the DRJ.

  2. Guided wave propagation in a honeycomb composite sandwich structure in presence of a high density core.

    Science.gov (United States)

    Sikdar, Shirsendu; Banerjee, Sauvik

    2016-09-01

    A coordinated theoretical, numerical and experimental study is carried out in an effort to interpret the characteristics of propagating guided Lamb wave modes in presence of a high-density (HD) core region in a honeycomb composite sandwich structure (HCSS). Initially, a two-dimensional (2D) semi-analytical model based on the global matrix method is used to study the response and dispersion characteristics of the HCSS with a soft core. Due to the complex structural characteristics, the study of guided wave (GW) propagation in HCSS with HD-core region inherently poses many challenges. Therefore, a numerical simulation of GW propagation in the HCSS with and without the HD-core region is carried out, using surface-bonded piezoelectric wafer transducer (PWT) network. From the numerical results, it is observed that the presence of HD-core significantly decreases both the group velocity and the amplitude of the received GW signal. Laboratory experiments are then conducted in order to verify the theoretical and numerical results. A good agreement between the theoretical, numerical and experimental results is observed in all the cases studied. An extensive parametric study is also carried out for a range of HD-core sizes and densities in order to study the effect due to the change in size and density of the HD zone on the characteristics of propagating GW modes. It is found that the amplitudes and group velocities of the GW modes decrease with the increase in HD-core width and density.

  3. Fibrous dysplasia

    Science.gov (United States)

    ... chap 22. Czerniak B. Fibrous dysplasia and related lesions. In: Czerniak B, ed. Bone Tumors. 2nd ... Assistant Professor of Pediatrics, University of Washington School of Medicine, Seattle, WA. Also ...

  4. Evaluation of barely visible indentation damage (BVID) in CF/EP sandwich composites using guided wave signals

    Science.gov (United States)

    Mustapha, Samir; Ye, Lin; Dong, Xingjian; Alamdari, Mehrisadat Makki

    2016-08-01

    Barely visible indentation damage after quasi-static indentation in sandwich CF/EP composites was assessed using ultrasonic guided wave signals. Finite element analyses were conducted to investigate the interaction between guided waves and damage, further to assist in the selection process of the Lamb wave sensitive modes for debonding identification. Composite sandwich beams and panels structures were investigated. Using the beam structure, a damage index was defined based on the change in the peak magnitude of the captured wave signals before and after the indentation, and the damage index was correlated with the residual deformation (defined as the depth of the dent), that was further correlated with the amount of crushing within the core. Both A0 and S0 Lamb wave modes showed high sensitivity to the presence of barely visible indentation damage with residual deformation of 0.2 mm. Furthermore, barely visible indentation damage was assessed in composite sandwich panels after indenting to 3 and 5 mm, and the damage index was defined, based on (a) the peak magnitude of the wave signals before and after indentation or (b) the mismatch between the original and reconstructed wave signals based on a time-reversal algorithm, and was subsequently applied to locate the position of indentation.

  5. Charge transport in the electrospun nanofiber composite membrane's three-dimensional fibrous structure

    Science.gov (United States)

    DeGostin, Matthew B.; Peracchio, Aldo A.; Myles, Timothy D.; Cassenti, Brice N.; Chiu, Wilson K. S.

    2016-03-01

    In this paper, a Fiber Network (FN) ion transport model is developed to simulate the three-dimensional fibrous microstructural morphology that results from the electrospinning membrane fabrication process. This model is able to approximate fiber layering within a membrane as well as membrane swelling due to water uptake. The discrete random fiber networks representing membranes are converted to resistor networks and solved for current flow and ionic conductivity. Model predictions are validated by comparison with experimental conductivity data from electrospun anion exchange membranes (AEM) and proton exchange membranes (PEM) for fuel cells as well as existing theories. The model is capable of predicting in-plane and thru-plane conductivity and takes into account detailed membrane characteristics, such as volume fraction, fiber diameter, fiber conductivity, and membrane layering, and as such may be used as a tool for advanced electrode design.

  6. Utilization of bagasse and coconut fibers waste as fillers of sandwich composite for bridge railway sleepers

    Science.gov (United States)

    Soehardjo, K. A.; Basuki, A.

    2017-07-01

    The bridge railway sleepers is an essential component in the construction of railways, as the foundation of the rail support in order to withstand the load a train that runs above it. Sleepers used in bridge construction are expected to have a longer service life, lighter weight and durable so that can be used more efficient. This research was carried out to create a model of bridges railway sleepers made of sandwich structured composite from fiber glass, epoxy resin with fillers waste of bagasse (sugar cane pulp mill) or coconut fiberboard (copra industry) that using polyurethane as an adhesive. The process of making was conditioned for small and medium industrial applications. Railway sleepers’ specifications adapted to meet the requirements of end user. The process steps in this research include; lay-up fiberglass combined with bagasse/coconut fiberboard (as fillers), gluing with epoxy resin, molded it with pressure to be solid, curing after solidification process. The specimens of composite, bagasse and coconut fiber board were tested for tensile and compressive strength. The prototype were tested of mechanical test: flexural moment test to the stand rail, flexural moment test to the middle of the sleepers and tensile strength test on one side of the sleepers, in accordance to SNI 11-3388-1994 Method testing of single block concrete sleepers and bearing single rail fastening systems. The results of mechanical testing all variations meet the technical specifications of end user such as test results for flexural moment on all prototypes, after load test, there is no visible crack. While in the tensile strength test, it seem the prototype with coconut fiberboard filler, shows better performance than bagasse fiberboard filler, the decisions is just depended on techno economic and lifetime.

  7. Blast-Resistant Improvement of Sandwich Armor Structure with Aluminum Foam Composite

    Directory of Open Access Journals (Sweden)

    Shu Yang

    2013-01-01

    Full Text Available Sandwich armor structures with aluminum foam can be utilized to protect a military vehicle from harmful blast load such as a landmine explosion. In this paper, a system-level dynamic finite element model is developed to simulate the blast event and to evaluate the blast-resistant performance of the sandwich armor structure. It is found that a sandwich armor structure with only aluminum foam is capable of mitigating crew injuries under a moderate blast load. However, a severe blast load causes force enhancement and results in much worse crew injury. An isolating layer between the aluminum foam and the vehicle floor is introduced to remediate this drawback. The results show that the blast-resistant capability of the innovative sandwich armor structure with the isolating layer increases remarkably.

  8. Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load

    Directory of Open Access Journals (Sweden)

    Jauhar Fajrin

    2017-03-01

    Full Text Available This paper presents a comparison of theoretical and experimental deflection of a hybrid sandwich panel under four-point bending load. The paper initially presents few basic equations developed under three-point load, followed by development of model under four-point bending load and a comparative analysis between theoretical and experimental results. It was found that the proposed model for predicting the deflection of hybrid sandwich panels provided fair agreement with the experimental values. Most of the sandwich panels showed theoretical deflection values higher than the experimental values, which is desirable in the design. It was also noticed that the introduction of intermediate layer does not contribute much to reduce the deflection of sandwich panel as the main contributor for the total deflection was the shear deformation of the core that mostly determined by the geometric of the samples and the thickness of the core.

  9. Mid term results of total hip arthroplasty using polyethylene-ceramic composite (Sandwich liner

    Directory of Open Access Journals (Sweden)

    Tao Wang

    2016-01-01

    Conclusions: Our experience with the ceramic-polyethylene sandwich liner acetabular component has been disappointing because of the high rate of fracture and osteolyis. We have discontinued the use of this device and recommend the same.

  10. EXPERIMENTAL ANALYSIS OF FLEXURAL STRENGTH ON GLASS FIBER SANDWICH COMPOSITE BY VARYING Z-PINS PITCHES

    OpenAIRE

    Pravin*, Jeyapratha

    2016-01-01

    This paper ambit to evaluate the flexural strength of glass fiber sandwich panels with varying z-pins pitches. Failure of sandwich panel are delamination and core shear, to minimize the crack propagation, pins are inserted in z-direction, by varying pitches through its thickness. During the insertion of pin, may cause the material some damage. Despite the damage, flexural property does not affected due interpolation of pins. Although the experiment were pull out with a phenomenal results of z...

  11. Application of sandwich honeycomb carbon/glass fiber-honeycomb composite in the floor component of electric car

    Science.gov (United States)

    Sukmaji, I. C.; Wijang, W. R.; Andri, S.; Bambang, K.; Teguh, T.

    2017-01-01

    Nowadays composite is a superior material used in automotive component due to its outstanding mechanical behavior. The sandwich polypropylene honeycomb core with carbon/glass fiber composite skin (SHCG) as based material in a floor component of electric car application is investigated in the present research. In sandwich structure form, it can absorb noise better compare with the conventional material [1]. Also in present paper, Finite Element Analysis (FEA) of SHCG as based material for floor component of the electric car is analyzed. The composite sandwich is contained with a layer uniform carbon fiber and mixing non-uniform carbon-glass fiber in upper and lower skin. Between skins of SHCG are core polypropylene honeycomb that it have good flexibility to form following dies profile. The variables of volume fraction ratio of carbon/glass fiber in SHCG skin are 20/80%, 30/70%, and 50/50%. The specimen of SHCG is tested using the universal testing machine by three points bending method refers to ASTM C393 and ASTM C365. The cross point between tensile strength to the volume fraction the mixing carbon/glass line and ratio cost line are the searched material with good mechanical performance and reasonable cost. The point is 30/70 volume fraction of carbon/glass fiber. The result of the testing experiment is become input properties of model structure sandwich in FEA simulation. FEA simulation approach is conducted to find critical strength and factor of complex safety geometry against varied distributed passenger loads of a floor component the electric car. The passenger loads variable are 80, 100, 150, 200, 250 and 300 kg.

  12. The effects of glass ionomer and flowable composite liners on the fracture resistance of open-sandwich class II restorations.

    Science.gov (United States)

    Güray Efes, Begüm; Yaman, Batu Can; Gümüştaş, Burak; Tıryakı, Murat

    2013-01-01

    This in vitro study aimed to investigate the effects of glass-ionomer and flowable composite liners on the fracture resistance of Class II amalgam and composite restorations. Group 1 cavities were restored with amalgam and Group 4 cavities with nanofill composite after the application of a dentin-bonding agent. For the remaining groups, light-cured-glass-ionomer liner was used in a gingival floor proximal box (Groups 2, 5) or flowable composite was used as a liner (Groups 3, 6), the remainder of the cavity was restored with amalgam (Groups 2, 3) or composite (Groups 5, 6). The restorations were loaded in compression to failure. The data was analyzed using Tukey's multiple comparison test. The fracture resistance was significantly higher (p0.05). Flowable composite, glass-ionomer liners increased the fracture resistance of open-sandwich Class II amalgam restorations.

  13. Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges.

    Directory of Open Access Journals (Sweden)

    Yujun Qi

    Full Text Available Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%. The results that are obtained herein can provide a foundation for the structural design of this type of panel.

  14. Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges.

    Science.gov (United States)

    Qi, Yujun; Fang, Hai; Liu, Weiqing

    2016-01-01

    Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%). The results that are obtained herein can provide a foundation for the structural design of this type of panel.

  15. MULTILAYERED PLATE ELEMENTS WITH NODE-DEPENDENT KINEMATICS FOR THE ANALYSIS OF COMPOSITE AND SANDWICH STRUCTURES

    Directory of Open Access Journals (Sweden)

    Stefano Valvano

    2017-04-01

    Full Text Available In this paper a new plate finite element (FE for the analysis of composite and sandwich plates is proposed. By making use of the node-variable plate theory assumptions, the new finite element allows for a simultaneous analysis of different subregions of the problem domain with different kinematics and accuracy, in a global/local sense. In particular higher-order theories with an Equivalent-Single-Layer (ESL approach are simultaneously used with advanced Layer-Wise (LW models. As a consequence, the computational costs can be reduced drastically by assuming refined theories only in those zones/nodes of the structural domain where the resulting strain and stress states present a complex distribution. On the contrary, computationally cheaper, low-order kinematic assumptions can be used in the remaining parts of the plate where a localized detailed analysis is not necessary. The primary advantage of the present variable-kinematics element and related global/local approach is that no ad-hoc techniques and mathematical artifices are required to mix the fields coming from two different and kinematically incompatible adjacent elements, because the plate structural theory varies within the finite element itself. In other words, the structural theory of the plate element is a property of the FE node in this present approach, and the continuity between two adjacent elements is ensured by adopting the same kinematics at the interface nodes. According to the Unified Formulation by Carrera, the through-the-thickness unknowns are described by Taylor polynomial expansions with ESL approach and by Legendre polynomials with LW approach. Furthermore, the Mixed Interpolated Tensorial Components (MITC method is employed to contrast the shear locking phenomenon. Several numerical investigations are carried out to validate and demonstrate the accuracy and efficiency of the present plate element, including comparison with various closed-form and FE solutions from the

  16. Multi-porous electroactive poly(L-lactic acid)/polypyrrole composite micro/nano fibrous scaffolds promote neurite outgrowth in PC12 cells

    Institute of Scientific and Technical Information of China (English)

    Qiaozhen Yu; Shuiling Xu; Kuihua Zhang; Yongming Shan

    2013-01-01

    In this study, poly(L-lactic acid)/ammonium persulfate doped-polypyrrole composite fibrous scaffolds with moderate conductivity were produced by combining electrospinning with in situ polymerization. PC12 cells were cultured on these fibrous scaffolds and their growth following electrical stimulation scanning electron microscopy coupled with the MTT cell viability test. The results demonstrated that the poly(L-lactic acid)/ammonium persulfate doped-polypyrrole fibrous scaffold was a dual 10.0 μA for about 2 days enhanced neuronal growth and neurite outgrowth, while a high current intensity (over 15.0 μA) suppressed them. These results indicate that electrical stimulation with a moderate current intensity for an optimum time frame can promote neuronal growth and neurite outgrowth in an intensity- and time-dependent manner.

  17. The effect of poly (lactic-co-glycolic) acid composition on the mechanical properties of electrospun fibrous mats.

    Science.gov (United States)

    Liu, X; Aho, J; Baldursdottir, S; Bohr, A; Qu, H; Christensen, L P; Rantanen, J; Yang, M

    2017-08-30

    The aim of this study was to investigate the influence of polymer molecular structure on the electrospinnability and mechanical properties of electrospun fibrous mats (EFMs). Polymers with similar molecular weight but different composition ratios (lactic acid (LA) and glycolic acid (GA)) were dissolved in binary mixtures of N,N-dimethylformamide (DMF) and tetrahydrofuran (THF). The intrinsic viscosity and rheological properties of polymer solutions were investigated prior to electrospinning. The morphology and mechanical properties of the resulting EFMs were characterized by scanning electron microscope (SEM) and dynamic mechanical analysis (DMA). Sufficiently high inter-molecular interactions were found to be a prerequisite to ensure the formation of fibers in the electrospinning process, regardless the polymer composition. The higher the amount of GA in the polymer composition, the more ordered and entangled molecules were formed after electrospinning from the solution in THF-DMF, which resulted in higher Young's modulus and tensile strength of the EFMs. In conclusion, this study shows that the mechanical properties of EFMs, which depend on the polymer molecule-solvent affinity, can be predicted by the inter-molecular interactions in the starting polymer solutions and over the drying process of electrospinning. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Long-term hygrothermal effects on damage tolerance of hybrid composite sandwich panels

    Science.gov (United States)

    Ishai, Ori; Hiel, Clement; Luft, Michael

    1995-01-01

    A sandwich construction, composed of hybrid carbon-glass fiber-reinforced plastic skins and a syntactic foam core, was selected as the design concept for a wind tunnel compressor blade application, where high damage tolerance and durability are of major importance. Beam specimens were prepared from open-edge and encapsulated sandwich panels which had previously been immersed in water at different temperatures for periods of up to about two years in the extreme case. Moisture absorption and strength characteristics, as related to time of exposure to hygrothermal conditions, were evaluated for the sandwich specimens and their constituents (skins and foam). After different exposure periods, low-velocity impact damage was inflicted on most sandwich specimens and damage characteristics were related to impact energy. Eventually, the residual compressive strengths of the damaged (and undamaged) beams were determined flexurally. Test results show that exposure to hygrothermal conditions leads to significant strength reductions for foam specimens and open-edge sandwich panels, compared with reference specimens stored at room temperature. In the case of skin specimens and for beams prepared from encapsulated sanwich panels that had previously been exposed to hygrothermal conditions, moisture absorption was found to improve strength as related to the reference case. The beneficial effect of moisture on skin performance was, however, limited to moisture contents below 1% (at 50 C and lower temperatures). Above this moisture level and at higher temperatures, strength degradation of the skin seems to prevail.

  19. Adjustability of resonance frequency by external magnetic field and bias electric field of sandwich magnetoelectric PZT/NFO/PZT composites

    Science.gov (United States)

    Xu, Ling-Fang; Feng, Xing; Sun, Kang; Liang, Ze-Yu; Xu, Qian; Liang, Jia-Yu; Yang, Chang-Ping

    2017-07-01

    Sandwich magnetoelectric composites of PZT/NFO/PZT (PNP) have been prepared by laminating PZT5, NiFe2O4, and PZT5 ceramics in turn with polyvinyl alcohol (PVA) paste. A systematic study of structural, magnetic and ferroelectric properties is undertaken. Structural studies carried out by X-ray diffraction indicate formation of cubic perovskite phase of PZT5 ceramic and cubic spinel phase of NiFe2O4 ceramic. As increasing the content of PZT5 phase, ferroelectric loops and magnetic loops of PNP composites showed increasing remnant electric polarizations and decreasing remnant magnetic moments separately. Both external magnetic fields and bias voltages could regulate the basal radial resonance frequency of the composites, which should be originated with the transformation and coupling of the stress between the piezoelectric phase and magnetostrictive phase. Such magnetoelectric composite provides great opportunities for electrostatically tunable devices.

  20. Modelling the Strength and Fatigue Life of a Unidirectional Fibrous Composite by Using Daniels' Sequence and Markov Chains

    Science.gov (United States)

    Paramonov, Yu.; Cimanis, V.; Varickis, S.; Kleinhofs, M.

    2013-11-01

    A review of the previous works of the authors dedicated to the use of Daniels' sequence (DS) for analyzing the relation between the distribution of the static strength of components of a unidirectional fibrous composite (UFC) and the distribution of its fatigue life is presented. A generalization of the DS which can be used to analyze the association of distribution of the static strength of composite components with distribution of the static strength of the UFC itself is given. In analyzing the fatigue life of a UFC, unlike in Daniels' model, the loading rate and randomness of the number of still workable components in the weak microvolume in which the destruction process takes place are taken into account. By analyzing the fatigue life, it is possible to explain the existence of the random fatigue strength and to calculate the maximum load at which the probability of absence of fatigue failure is great enough when the number of cycles of fatigue loading tends to infinity. Numerical examples of processing of experimental data are presented, and estimates for parameters of the corresponding nonlinear regression model, which can be interpreted as the strength parameters of UFC, are obtained.

  1. Silk fibroin/sodium alginate composite nano-fibrous scaffold prepared through thermally induced phase-separation (TIPS) method for biomedical applications.

    Science.gov (United States)

    Zhang, Haiping; Liu, Xiaotian; Yang, Mingying; Zhu, Liangjun

    2015-10-01

    To mimic the natural fibrous structure of the tissue extracellular matrix, a nano-fibrous silk fibroin (SF)/sodium alginate (SA) composite scaffold was fabricated by a thermally-induced phase-separation method. The effects of SF/SA ratio on the structure and the porosity of the composite scaffolds were examined. Scanning electron microscopy and porosity results showed that the 5SF/1SA and 3SF/1SA scaffolds possessed an excellent nano-fibrous structure and a porosity of more than 90%. Fourier transform infrared, X-ray diffraction, and differential scanning calorimetry results indicated the physical interaction between SF and SA molecules and their good compatibility in the 5SF/1SA and 3SF/1SA scaffolds, whereas they showed less compatibility in the 1SF/1SA scaffold. Cell culture results showed that MG-63 cells can attach and grow well on the surface of the SF/SA scaffolds. The nano-fibrous SF/SA scaffold can be potentially used in tissue engineering.

  2. Finite Element Analysis of Damage in Fibrous Composites Using a Micromechanical Model

    Science.gov (United States)

    1993-12-01

    polymer matrix composite laminate with a center hole in order to study the progression of damage and final failure during tensile loading. The comparisons between the present predictions and the experimental results for the previous examples are very

  3. Morphing nacelle inlet lip with pneumatic actuators and a flexible nano composite sandwich panel

    Science.gov (United States)

    Gulsine Ozdemir, Nazli; Scarpa, Fabrizio; Craciun, Monica; Remillat, Chrystel; Lira, Cristian; Jagessur, Yogesh; Da Rocha-Schmidt, Luiz

    2015-12-01

    We present a hybrid pneumatic/flexible sandwich structure with thermoplastic (TP) nanocomposite skins to enable the morphing of a nacelle inlet lip. The design consists of pneumatic inflatables as actuators and a flexible sandwich panel that morphs under variable pressure combinations to adapt different flight conditions and save fuel. The sandwich panel forms the outer layer of the nacelle inlet lip. It is lightweight, compliant and impact resistant with no discontinuities, and consists of graphene-doped thermoplastic polyurethane (G/TPU) skins that are supported by an aluminium Flex-core honeycomb in the middle, with near zero in-plane Poisson’s ratio behaviour. A test rig for a reduced-scale demonstrator was designed and built to test the prototype of morphing nacelle with custom-made pneumatic actuators. The output force and the deflections of the experimental demonstrator are verified with the internal pressures of the actuators varying from 0 to 0.41 MPa. The results show the feasibility and promise of the hybrid inflatable/nanocomposite sandwich panel for morphing nacelle airframes.

  4. CORRELATION BETWEEN THE DAMPING FACTOR PER UNIT MASS AND THE FREE LENGTH FOR COMPOSITE SANDWICH BARS. EXPERIMENTAL INVESTIGATIONS

    Directory of Open Access Journals (Sweden)

    Cristian-Oliviu BURADA

    2015-05-01

    Full Text Available In this paper we have build some composite sandwich bars in this way: the core is made with polypropylene honeycomb (its thickness is 10, 15 and 20 mm reinforced with 1 layer of carbon fiber (on the sample upper and lower sides. For these samples we have determined, by experimental means, the damping factor per unit mass and per unit length. Then, by using the regression analysis, we have established correlations between the damping factor per unit mass and the bars free length. In order to obtain these correlations, we have considered the next free lengths of the bars: 200, 230, 260, 290, 320, 350.

  5. Composite sandwich construction with syntactic foam core - A practical assessment of post-impact damage and residual strength

    Science.gov (United States)

    Hiel, C.; Dittman, D.; Ishai, O.

    1993-01-01

    An account is given of an inspection method that has been successfully used to assess the postimpact damage and residual strength of syntactic (glass microspheres in epoxy matrix) foam-core sandwich panels with hybrid (carbon and glass fiber-reinforced) composite skins, which inherently possess high damage tolerance. SEM establishes that the crushing of the microspheres is responsible for the absorption of most of the impact energy. Damage tolerance is a function of the localization of damage by that high impact energy absorption.

  6. Light-weight sandwich panel honeycomb core with hybrid carbon-glass fiber composite skin for electric vehicle application

    Science.gov (United States)

    Cahyono, Sukmaji Indro; Widodo, Angit; Anwar, Miftahul; Diharjo, Kuncoro; Triyono, Teguh; Hapid, A.; Kaleg, S.

    2016-03-01

    The carbon fiber reinforced plastic (CFRP) composite is relative high cost material in current manufacturing process of electric vehicle body structure. Sandwich panels consisting polypropylene (PP) honeycomb core with hybrid carbon-glass fiber composite skin were investigated. The aim of present paper was evaluate the flexural properties and bending rigidity of various volume fraction carbon-glass fiber composite skins with the honeycomb core. The flexural properties and cost of panels were compared to the reported values of solid hybrid Carbon/Glass FRP used for the frame body structure of electric vehicle. The finite element model of represented sandwich panel was established to characterize the flexural properties of material using homogenization technique. Finally, simplified model was employed to crashworthiness analysis for engine hood of the body electric vehicle structure. The good cost-electiveness of honeycomb core with hybrid carbon-glass fiber skin has the potential to be used as a light-weight alternative material in body electric vehicle fabricated.

  7. Explicit modeling the progressive interface damage in fibrous composite: Analytical vs. numerical approach

    DEFF Research Database (Denmark)

    Kushch, V.I.; Shmegera, S.V.; Mishnaevsky, Leon

    2011-01-01

    Two micromechanical, representative unit cell type models of fiber reinforced composite (FRC) are applied to simulate explicitly onset and accumulation of scattered local damage in the form of interface debonding. The first model is based on the analytical, multipole expansion type solution...... of the multiple inclusion problem by means of complex potentials. The second, finite element model of FRC is based on the cohesive zone model of interface. Simulation of progressive debonding in FRC using the many-fiber models of composite has been performed. The advantageous features and applicability areas...... of both models are discussed. It has been shown that the developed models provide detailed analysis of the progressive debonding phenomena including the interface crack cluster formation, overall stiffness reduction and induced anisotropy of the effective elastic moduli of composite....

  8. A High-Order Theory for the Analysis of Circular Cylindrical Composite Sandwich Shells with Transversely Compliant Core Subjected to External Loads

    DEFF Research Database (Denmark)

    Rahmani, Omid; Khalili, S.M.R.; Thomsen, Ole Thybo

    2012-01-01

    , in contrast to most of the available sandwich plate and shell theories, no prior assumptions are made with respect to the displacement field in the core. Herein the displacement and the stress fields of the core material are determined through a 3D elasticity solution. The performance of the present theory......A new model based on the high order sandwich panel theory is proposed to study the effect of external loads on the free vibration of circular cylindrical composite sandwich shells with transversely compliant core, including also the calculation of the buckling loads. In the present model...... is compared with that of other sandwich theories by the presentation of comparative results obtained for several examples encompassing different material properties and geometric parameters. It is shown that the present model produce results of very high accuracy, and it is suggested that the present model...

  9. Multi-porous electroactive poly(L-lactic acid)/polypyrrole composite micro/nano fibrous scaffolds promote neurite outgrowth in PC12 cells.

    Science.gov (United States)

    Yu, Qiaozhen; Xu, Shuiling; Zhang, Kuihua; Shan, Yongming

    2013-01-05

    In this study, poly(L-lactic acid)/ammonium persulfate doped-polypyrrole composite fibrous scaffolds with moderate conductivity were produced by combining electrospinning with in situ polymerization. PC12 cells were cultured on these fibrous scaffolds and their growth following electrical stimulation (0-20.0 μA stimulus intensity, for 1-4 days) was observed using inverted light microscopy, and scanning electron microscopy coupled with the MTT cell viability test. The results demonstrated that the poly(L-lactic acid)/ammonium persulfate doped-polypyrrole fibrous scaffold was a dual multi-porous micro/nano fibrous scaffold. An electrical stimulation with a current intensity 5.0-10.0 μA for about 2 days enhanced neuronal growth and neurite outgrowth, while a high current intensity (over 15.0 μA) suppressed them. These results indicate that electrical stimulation with a moderate current intensity for an optimum time frame can promote neuronal growth and neurite outgrowth in an intensity- and time-dependent manner.

  10. Multi-porous electroactive poly(L-lactic acid)/polypyrrole composite micro/nano fibrous scaffolds promote neurite outgrowth in PC12 cells☆

    Science.gov (United States)

    Yu, Qiaozhen; Xu, Shuiling; Zhang, Kuihua; Shan, Yongming

    2013-01-01

    In this study, poly(L-lactic acid)/ammonium persulfate doped-polypyrrole composite fibrous scaffolds with moderate conductivity were produced by combining electrospinning with in situ polymerization. PC12 cells were cultured on these fibrous scaffolds and their growth following electrical stimulation (0–20.0 μA stimulus intensity, for 1–4 days) was observed using inverted light microscopy, and scanning electron microscopy coupled with the MTT cell viability test. The results demonstrated that the poly(L-lactic acid)/ammonium persulfate doped-polypyrrole fibrous scaffold was a dual multi-porous micro/nano fibrous scaffold. An electrical stimulation with a current intensity 5.0–10.0 μA for about 2 days enhanced neuronal growth and neurite outgrowth, while a high current intensity (over 15.0 μA) suppressed them. These results indicate that electrical stimulation with a moderate current intensity for an optimum time frame can promote neuronal growth and neurite outgrowth in an intensity- and time-dependent manner. PMID:25206369

  11. Mid term results of total hip arthroplasty using polyethylene-ceramic composite (Sandwich) liner.

    Science.gov (United States)

    Wang, Tao; Sun, Jun-Ying; Zha, Guo-Chun; Dong, Sheng-Jie; Zhao, Xi-Jiang

    2016-01-01

    Ceramic-on-ceramic (COC) couplings are an attractive alternative bearing surfaces that have been reported to eliminate or reduce problems related to polyethylene wear debris. However, the material in total hip arthroplasty (THA) remains one of the major concern regarding the risk of fracture. The present study aims at reporting the fracture rate of bearings in a series of COC THAs with the use of a sandwich liner and attempt to detect the relative risk factors, the possible cause and assess the clinical results. We retrospectively evaluated 153 patients (163 hips) using the sandwich liner COC THA between 2001 and 2009. Patient assessment was based on demographic factors, including age, weight, gender and body-mass index (BMI). All patients were evaluated clinically and radiographically or using computed tomography viz-a-viz dislocation, osteolysis, periprosthetic fracture, infection, loosening and implant fracture. Three ceramic sandwich liners fracture (1.84%) were observed at an average of 7.3 years' followup. The factors which were found to be non-significant to the ceramic liner fracture, included age (P = 0.205), weight (P = 0.241), gender (P = 0.553), BMI (P = 0.736), inclination (P = 0.199) and anteversion (P = 0.223). The overall survival was 91.4% at 12-year with revision as the endpoint. Other complications included osteolysis in 4 (2.45%), dislocation in one and periprosthetic fracture in one. In no hip aseptic loosening of the implants was seen. Our experience with the ceramic-polyethylene sandwich liner acetabular component has been disappointing because of the high rate of fracture and osteolyis. We have discontinued the use of this device and recommend the same.

  12. A Multi-scale Refined Zigzag Theory for Multilayered Composite and Sandwich Plates with Improved Transverse Shear Stresses

    Science.gov (United States)

    Iurlaro, Luigi; Gherlone, Marco; Di Sciuva, Marco; Tessler, Alexander

    2013-01-01

    The Refined Zigzag Theory (RZT) enables accurate predictions of the in-plane displacements, strains, and stresses. The transverse shear stresses obtained from constitutive equations are layer-wise constant. Although these transverse shear stresses are generally accurate in the average, layer-wise sense, they are nevertheless discontinuous at layer interfaces, and thus they violate the requisite interlaminar continuity of transverse stresses. Recently, Tessler applied Reissner's mixed variational theorem and RZT kinematic assumptions to derive an accurate and efficient shear-deformation theory for homogeneous, laminated composite, and sandwich beams, called RZT(m), where "m" stands for "mixed". Herein, the RZT(m) for beams is extended to plate analysis, where two alternative assumptions for the transverse shear stresses field are examined: the first follows Tessler's formulation, whereas the second is based on Murakami's polynomial approach. Results for elasto-static simply supported and cantilever plates demonstrate that Tessler's formulation results in a powerful and efficient structural theory that is well-suited for the analysis of multilayered composite and sandwich panels.

  13. Effect of fibre arrangement on the multiaxial fatigue of fibrous composites: a micromechanical computational model

    Directory of Open Access Journals (Sweden)

    Roberto Brighenti

    2015-10-01

    Full Text Available Structural components made of fibre-reinforced materials are frequently used in engineering applications. Fibre-reinforced composites are multiphase materials, and complex mechanical phenomena take place at limit conditions but also during normal service situations, especially under fatigue loading, causing a progressive deterioration and damage. Under repeated loading, the degradation mainly occurs in the matrix material and at the fibre-matrix interface, and such a degradation has to be quantified for design structural assessment purposes. To this end, damage mechanics and fracture mechanics theories can be suitably applied to examine such a problem. Damage concepts can be applied to the matrix mechanical characteristics and, by adopting a 3-D mixed mode fracture description of the fibre-matrix detachment, fatigue fracture mechanics concepts can be used to determine the progressive fibre debonding responsible for the loss of load bearing capacity of the reinforcing phase. In the present paper, a micromechanical model is used to evaluate the unixial or multiaxial fatigue behaviour of structures with equi-oriented or randomly distributed fibres. The spatial fibre arrangement is taken into account through a statistical description of their orientation angles for which a Gaussian-like distribution is assumed, whereas the mechanical effect of the fibres on the composite is accounted for by a homogenization approach aimed at obtaining the macroscopic elastic constants of the material. The composite material behaves as an isotropic one for randomly distributed fibres, while it is transversally isotropic for unidirectional fibres. The fibre arrangement in the structural component influences the fatigue life with respect to the biaxiality ratio for multiaxial constant amplitude fatigue loading. One representative parametric example is discussed.

  14. Detecting the honeycomb sandwich composite material's moisture impregnating defects by using infrared thermography technique

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Koo Ahn; Choi, Man Yong; Park, Jeong Hak; Choi, Won Jae [Safety Measurement Center, Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of); Park, Hee Sang [R and D, Korea Research Institute of Smart Material and Structures System Association, Daejeon (Korea, Republic of)

    2017-04-15

    Many composite materials are used in the aerospace industry because of their excellent mechanical properties. However, the nature of aviation exposes these materials to high temperature and high moisture conditions depending on climate, location, and altitude. Therefore, the molecular arrangement chemical properties, and mechanical properties of composite materials can be changed under these conditions. As a result, surface disruptions and cracks can be created. Consequently, moisture-impregnating defects can be induced due to the crack and delamination of composite materials as they are repeatedly exposed to moisture absorption moisture release, fatigue environment, temperature changes, and fluid pressure changes. This study evaluates the possibility of detecting the moisture-impregnating defects of CFRP and GFRP honeycomb structure sandwich composite materials, which are the composite materials in the aircraft structure, by using an active infrared thermography technology among non-destructive testing methods. In all experiments, it was possible to distinguish the area and a number of CFRP composite materials more clearly than those of GFRP composite material. The highest detection rate was observed in the heating duration of 50 mHz and the low detection rate was at the heating duration of over 500 mHz. The reflection method showed a higher detection rate than the transmission method.

  15. Application of layered finite elements in the numerical analysis of laminated composite and sandwich structures with delaminations

    Directory of Open Access Journals (Sweden)

    Vuksanović Đorđe

    2015-01-01

    Full Text Available Laminar composites are modern engineering materials widely used in the mechanical and civil engineering. In the paper, some recent advances in a numerical analysis of laminated composite and sandwich plates and shells of different shapes, with existing zones of partial delamination, are presented. The layered finite elements, based on the extended version of the Generalized Laminated Plate Theory of Reddy, are applied for the numerical solution of several structural problems. After the verification of the proposed model for intact structures using the existing data from the literature, the effects of the size and the position of embedded delamination zones on the structural response of laminated structures are investigated numerically by means of a variety of numerical applications.

  16. Chemical vapor infiltration of TiB{sub 2} fibrous composites

    Energy Technology Data Exchange (ETDEWEB)

    Besmann, T.M. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    This program is designed to develop a Hall-Heroult aluminum smelting cathode with substantially improved properties. The carbon cathodes in current use require significant anode-to-cathode spacing in order to prevent shorting, causing significant electrical inefficiencies. This is due to the non-wettability of carbon by aluminum which causes instability in the cathodic aluminum pad. It is suggested that a fiber reinforced-TiB{sub 2} matrix composite would have the requisite wettability, strength, strain-to-failure, cost, and lifetime to solve this problem. The approach selected to fabricate such a cathode material is chemical vapor infiltration (CVI). This process produces high purity matrix TiB{sub 2} without damaging the relatively fragile fibers. The program is designed to evaluate potential fiber reinforcements, fabricate test specimens, and scale the process to provide demonstration components.

  17. Light Like a Feather: A Fibrous Natural Composite with a Shape Changing from Round to Square.

    Science.gov (United States)

    Wang, Bin; Meyers, Marc André

    2017-03-01

    Only seldom are square/rectangular shapes found in nature. One notable exception is the bird feather rachis, which raises the question: why is the proximal base round but the distal end square? Herein, it is uncovered that, given the same area, square cross sections show higher bending rigidity and are superior in maintaining the original shape, whereas circular sections ovalize upon flexing. This circular-to-square shape change increases the ability of the flight feathers to resist flexure while minimizes the weight along the shaft length. The walls are themselves a heterogeneous composite with the fiber arrangements adjusted to the local stress requirements: the dorsal and ventral regions are composed of longitudinal and circumferential fibers, while lateral walls consist of crossed fibers. This natural avian design is ready to be reproduced, and it is anticipated that the knowledge gained from this work will inspire new materials and structures for, e.g., manned/unmanned aerial vehicles.

  18. Performance of Composite Sandwich Beam with AI Foam Core in Bending%铝泡沫复合材料夹芯梁的弯曲性能

    Institute of Scientific and Technical Information of China (English)

    周广涛; 王新筑

    2011-01-01

    Composite sandwich beams comprising composite faces and Al cores have been designed and manufactured by the autoclave cure process. The quasi-static three-point bending response of simply supported composite sandwich beams is measured by experiment. This investigation is concerned with the collapse response and flexural stiffness of simply supported composite sandwich beams with metal foam cores, the deformation and failure behavior is also explored. The experimental investigation reveals that the failure mode of sandwich beams is face yield. Compared to the other three common metal foam sandwich structures with metal faces, the bending specific stiffness of metal foam sandwich structure with composite faces is higher.%设计并采用热压罐方法生产了由复合材料面板和铝泡沫芯子组成的复合材料夹芯梁,对其在简支边界条件和三点弯曲受载下的失效模式及弯曲刚度进行了实验研究。研究发现:与其他3种常见的金属泡沫芯子金属面板夹芯结构相比,自行设计的面板为层合板的金属泡沫复合材料夹芯结构具有较高的弯曲比刚度、明显的重量优势及可设计性。

  19. Study on the performance of infrared thermal imaging light source for detection of impact defects in CFRP composite sandwich panels

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hee Sang [R and D, Korea Research Institute of Smart Material and Structures System Association, Daejeon (Korea, Republic of); Choi, Man Yong; Kwon, Koo Ahn; Park, Jeong Hak; Choi, Won Jae [Safety measurement center, Korea research Institute of Standards and Science, Daejeon (Korea, Republic of); Jung, Hyun Chul [Dept. of Mechanical Engineering Chosun University, Gwangju (Korea, Republic of)

    2017-04-15

    Recently, composite materials have been mainly used in the main wings, ailerons, and fuselages of aircraft and rotor blades of helicopters. Composite materials used in rapid moving structures are subject to impact by hail, lightning, and bird strike. Such an impact can destroy fiber tissues in the composite materials as well as deform the composite materials, resulting in various problems such as weakened rigidity of the composite structure and penetration of water into tiny cracks. In this study, experiments were conducted using a 2 kW halogen lamp which is most frequently used as a light source, a 2 kW near-infrared lamp, which is used for heating to a high temperature, and a 6 kW xenon flash lamp which emits a large amount of energy for a moment. CFRP composite sandwich panels using Nomex honeycomb core were used as the specimens. Experiments were carried out under impact damages of 1, 4 and 8 J. It was found that the detection of defects was fast when the xenon flash lamp was used. The detection of damaged regions was excellent when the halogen lamp was used. Furthermore, the near-infrared lamp is an effective technology for showing the surface of a test object.

  20. Articularities of Analysis and Behaviour of Concrete Beams Reinforced with Fibrous Polymer Composite Bars

    Directory of Open Access Journals (Sweden)

    N. Ţăranu

    2006-01-01

    Full Text Available Traditional steel based reinforcement systems for concrete elements are facing with serious problems mainly caused by corrosion due to chemically aggressive environments and salts used in deicing procedures, especially in case of bridge steel reinforced concrete girders. Also in some cases special applications require structural members with magnetic transparency. An alternative to this major problem has recently become the use of fiber reinforced polymer (FPR composite bars as internal reinforcement for concrete beams. The particularities of their mechanical properties are making the design process a difficult task for engineers, numerous research centers being involved in correcting this situation. The general aspects concerning the conceiving of FR.P reinforced concrete beams are firstly analyzed, compared to those reinforced with steel bars. Some results of a Finite Element Analysis, as part of a complex program which also implies full scale testing of FRP reinforced beams subjected to bending, are given and discussed in the paper. The low elasticity modulus presented by glass fiber reinforced polymer (GFRP bars does not justify its use from structural point of view when deflection is the limiting condition but for corrosive resistance reasons and special electromagnetic properties this system can be promoted.

  1. Ultrastructure of dragonfly wing veins: composite structure of fibrous material supplemented by resilin.

    Science.gov (United States)

    Appel, Esther; Heepe, Lars; Lin, Chung-Ping; Gorb, Stanislav N

    2015-10-01

    Dragonflies count among the most skilful of the flying insects. Their exceptional aerodynamic performance has been the subject of various studies. Morphological and kinematic investigations have showed that dragonfly wings, though being rather stiff, are able to undergo passive deformation during flight, thereby improving the aerodynamic performance. Resilin, a rubber-like protein, has been suggested to be a key component in insect wing flexibility and deformation in response to aerodynamic loads, and has been reported in various arthropod locomotor systems. It has already been found in wing vein joints, connecting longitudinal veins to cross veins, and was shown to endow the dragonfly wing with chordwise flexibility, thereby most likely influencing the dragonfly's flight performance. The present study revealed that resilin is not only present in wing vein joints, but also in the internal cuticle layers of veins in wings of Sympetrum vulgatum (SV) and Matrona basilaris basilaris (MBB). Combined with other structural features of wing veins, such as number and thickness of cuticle layers, material composition, and cross-sectional shape, resilin most probably has an effect on the vein's material properties and the degree of elastic deformations. In order to elucidate the wing vein ultrastructure and the exact localisation of resilin in the internal layers of the vein cuticle, the approaches of bright-field light microscopy, wide-field fluorescence microscopy, confocal laser-scanning microscopy, scanning electron microscopy and transmission electron microscopy were combined. Wing veins were shown to consist of up to six different cuticle layers and a single row of underlying epidermal cells. In wing veins of MBB, the latter are densely packed with light-scattering spheres, previously shown to produce structural colours in the form of quasiordered arrays. Longitudinal and cross veins differ significantly in relative thickness of exo- and endocuticle, with cross veins

  2. Self-assembly of 2D sandwich-structured MnFe{sub 2}O{sub 4}/graphene composites for high-performance lithium storage

    Energy Technology Data Exchange (ETDEWEB)

    Li, Songmei, E-mail: songmei_li@buaa.edu.cn; Wang, Bo; Li, Bin; Liu, Jianhua; Yu, Mei; Wu, Xiaoyu

    2015-01-15

    Highlights: • MFO/GN composites were synthesized by a facile in situ solvothermal approach. • The MFO microspheres are sandwiched between the graphene layers. • Each MFO microsphere is an interstitial cluster of nanoparticles. • The MFO/GN electrode exhibits an enhanced cyclability for Li-ion batteries anodes. - Abstract: In this study, two-dimensional (2D) sandwich-structured MnFe{sub 2}O{sub 4}/graphene (MFO/GN) composites are synthesized by a facile in situ solvothermal approach, using cetyltrimethylammonium bromide (CTAB) as cationic surfactant. As a consequence, the nanocomposites of MFO/GN self-assembled into a 2D sandwich structure, in which the interstitial cluster structure of microsphere-type MnFe{sub 2}O{sub 4} is sandwiched between the graphene layers. This special structure of the MFO/GN composites used as anodes for lithium-ion batteries will be favorable for the maximum accessible surface of electroactive materials, fast diffusion of lithium ions and migration of electron, and elastomeric space to accommodate volume changes during the discharge–charge processes. The as-synthesized MFO/GN composites deliver a high specific reversible capacity of 987.95 mA h g{sup −1} at a current density of 200 mA g{sup −1}, a good capacity retention of 69.27% after 80 cycles and excellent rate performance for lithium storage.

  3. Innovative use of wood-plastic-composites (WPC) as a core material in the sandwich injection molding process

    Science.gov (United States)

    Moritzer, Elmar; Martin, Yannick

    2016-03-01

    The demand for materials based on renewable raw materials has risen steadily in recent years. With society's increasing interest for climate protection and sustainability, natural-based materials such as wood-plastic-composites (WPC) have gained market share thanks to their positive reputation. Due to advantages over unreinforced plastics such as cost reduction and weight savings it is possible to use WPC in a wide area of application. Additionally, an increase in mechanical properties such as rigidity and strength is achieved by the fibers compared to unreinforced polymers. The combination of plastic and wood combines the positive properties of both components in an innovative material. Despite the many positive properties of wood-plastic-composite, there are also negative characteristics that prevent the use of WPC in many product areas, such as automotive interiors. In particular, increased water intake, which may result in swelling of near-surface particles, increased odor emissions, poor surface textures and distortion of the components are unacceptable for many applications. The sandwich injection molding process can improve this situation by eliminating the negative properties of WPC by enclosing it with a pure polymer. In this case, a layered structure of skin and core material is produced, wherein the core component is completely enclosed by the skin component. The suitability of WPC as the core component in the sandwich injection molding has not yet been investigated. In this study the possibilities and limitations of the use of WPC are presented. The consideration of different fiber types, fiber contents, skin materials and its effect on the filling behavior are the focus of the presented analysis.

  4. Fractal Patterns of Fracture in Sandwich Composite Materials under Biaxial Tension

    Institute of Scientific and Technical Information of China (English)

    JingFANG; XuefengYAO; 等

    1996-01-01

    The paper presents a successful experiment to generate a fractal pattern of branching cracks in a brittle material sandwiched in ductile pates.A glass sheet bonded between two polycarbonate plates was heated at different levels of temperatures and the stress field due to the difference of thermal coefficients of the materials was solved by combining the results from isochromatic fringes and thermal stress analysis.At a critical degree of temperature,a crack was initiated at a point and soon produced crack branches to release the stored energy.A tree-like fractal patterns of the branch cracks was then developed with the growth of the branches that subsequently produced more branches on their ways of propagation.The fractakl dimension of the fracture pattern was evaluated and the mechanism of the fragmentation was analyzed with the help of the residual stress field of isochromatic and isoclinic patterns.

  5. Preparation and performance of lightweight sandwich composite%轻质夹层结构复合材料的制备及性能

    Institute of Scientific and Technical Information of China (English)

    张乔斌; 李浩; 昌放辉

    2011-01-01

    To alleviate the density of the sandwich composite, a new light sandwich composite was prepared using high-strength glass fiber-reinforced composite materials as the surface and light polyurethane-modified epoxy resin absorption material as the core which was synthesized from a variety of hollow glass microsphere and polyurethane-based resin. The preparation, underwater acoustic property mechanical property of sandwich composite were study. The research results showed that the sandwich composite has a low density, excellent underwater acoustic property and mechanical properties using GFRP synthesized from the S2 high-strength glass fiber fabric of Nanjing Institute as the surface material and light polyurethane-modified epoxy resin material as the core. This sandwich composite has a good bearing property and underwater sound stealth property while the weigh of the sandwich structure was reduced. This light sandwich structure must be more conducive to engineering applications.%为减轻以往夹层结构复合材料的密度,采用高强玻璃钢材料作为表层、多种空心玻璃微珠填充聚氨酯改性环氧树脂合成的轻质吸声材料作为芯材,制备了一种新型的轻质夹层结构复合材料,对夹层复合材料的制备工艺进行设计,并研究其水声性能和力学性能.结果证明,以南京玻纤院的S2高强织物采用真空成型合成的玻璃钢作为表层材料和轻质聚氨酯改性环氧树脂材料作为芯材来制作的夹层结构复合材料具有重量轻、水声性能和力学性能优良的特点,在降低夹层结构复合材料重量的同时,具有良好的声隐身性能和承载性能,更有利于工程应用.

  6. Fabrication of a novel sandwich-like composite separator with enhanced physical and electrochemical performances for lithium-ion battery

    Science.gov (United States)

    Wu, Dazhao; He, Jinlin; Zhang, Mingzu; Ni, Peihong; Li, Xiaofei; Hu, Jiankang

    2015-09-01

    In this work, two kinds of composite separators are prepared and used for lithium-ion batteries, which are a PP nonwoven/PVdF-HFP/PMMA blending-type composite separator (CS) and a sandwich-like PP nonwoven/PVdF-HFP composite separator with the introduction of PMMA nanoparticles on the surface (nano-CS). The morphology, electrolyte uptake, ionic conductivity and electrochemical properties of the separators are studied by SEM analysis, impedance measurements, charge-discharge cycle and C-rate tests, respectively. The nano-CS and CS(0.2) exhibit similar properties in electrolyte uptake (212% and 202%, respectively) and porosity (77.9% and 75.3%, respectively). Nonetheless, nano-CS shows enhanced thermal stability and higher ionic conductivity compared with CS(0.2) and commercial PP nonwoven/PVdF-HFP separators. Meanwhile, the LiFePO4/Li half-cell assembled with nano-CS displays the best C-rate capacity and cyclability especially at the high discharge current rate, indicating that the nano-CS separator is a kind of promising candidate for the high-performance lithium-ion batteries.

  7. Composite Behavior of a Novel Insulated Concrete Sandwich Wall Panel Reinforced with GFRP Shear Grids: Effects of Insulation Types

    Directory of Open Access Journals (Sweden)

    JunHee Kim

    2015-03-01

    Full Text Available A full-scale experimental program was used in this study to investigate the structural behavior of novel insulated concrete sandwich wall panels (SWPs reinforced with grid-type glass-fiber-reinforced polymer (GFRP shear connectors. Two kinds of insulation-expanded polystyrene (EPS and extruded polystyrene (XPS with 100 mm thickness were incased between the two concrete wythes to meet the increasing demand for the insulation performance of building envelope. One to four GFRP shear grids were used to examine the degree of composite action of the two concrete wythes. Ten specimens of SWPs were tested under displacement control subjected to four-point concentrated loads. The test results showed that the SWPs reinforced with GFRP grids as shear connectors developed a high degree of composite action resulting in high flexural strength. The specimens with EPS foam exhibited an enhanced load-displacement behavior compared with the specimens with XPS because of the relatively stronger bond between insulation and concrete. In addition, the ultimate strength of the test results was compared to the analytical prediction with the mechanical properties of only GRFP grids. The specimens with EPS insulation presented higher strength-based composite action than the ones with XPS insulation.

  8. Synthesis,Characteristics and Applications of Fibrous Composites with Immobilized Nanomolecular Layers of Ferrocyanides and Phosphates of Some d-Elements

    Institute of Scientific and Technical Information of China (English)

    V.Nesterenko

    2007-01-01

    1 Results The general principle of the synthesis of fibrous inorganic ion-exchanging composites, containing the combination of polymer analogous conversion reactions of the fibres and cycles of ion-molecular layering is advanced. Synthesis of thin nanomolecular layers of the acid Ti(Ⅳ) and Zr(Ⅳ) phosphates on surface of the cotton fibres and Cu(Ⅱ) and Fe(Ⅲ) ferrocyanides-on polyacrylonitrile fibres was performed on the basis of this principle. By the method of X-ray analysis it was stated that the forme...

  9. Full-field ultrasonic inspection for a composite sandwich plate skin-core debonding detection using laser-based ultrasonics

    Science.gov (United States)

    Chong, See Yenn; Victor, Jared J.; Todd, Michael D.

    2017-04-01

    In this paper, a full-field ultrasonic guided wave method is proposed to inspect a composite sandwich specimen made for an aircraft engine nacelle. The back skin/core interface of the specimen is built with two fabricated disbond defects (diameters of 12.7 mm and 25.4 mm) by removing areas of the adhesive used to bond the back skin to the core. A laser ultrasonic interrogation system (LUIS) incorporated with a disbond detection algorithm is developed. The system consists of a 1-kHz laser ultrasonic scanning system and a single fixed ultrasonic sensor to interrogate ultrasonic guided waves in the sandwich specimen. The interest area of 400 mm × 400 mm is scanned at a 0.5 mm scan interval. The corresponding full-field ultrasonic data is obtained and generated in the three-dimensional (3-D) space-time domain. Then, the 3-D full-field ultrasonic data is Fourier transformed and the ultrasonic frequency spectra are analyzed to determine the dominant frequency that is sensitive to the disbond defects. Continuous wavelet transform (CWT) based on fast Fourier transform (FFT) is implemented as a single-frequency bandpass filter to filter the full-field ultrasonic data in the 3-D space-time domain at the selected dominant frequency. The LUIS has shown the ability to detect the disbond with diameters of 11 mm and 23 mm which match to the pre-determined disbond sizes well. For future research, a robust signal processing algorithm and a model-based matched filter will be investigated to make the detection process autonomous and improve detectability

  10. A novel model for interpreting experimental results from sandwich composites exposed to fire conditions

    DEFF Research Database (Denmark)

    Mindykowski, Pierrick Anthony; Karatzas, Vasileios; Jomaas, Grunde

    Composite materials offer a large range of advantages for the marine industry such as light weight, reduction of the maintenance costs and the possibility to create complex shapes. However, in order to have the approval of the authorities for building a SOLAS vessel with composite materials...

  11. Wood-based Tri-Axial Sandwich Composite Materials: Design, Fabrication, Testing, Modeling and Application

    Science.gov (United States)

    Jinghao Li; John F. Hunt; Shaoqin Gong; Zhiyong Cai

    2014-01-01

    As the demand for sustainable materials increases, there are unique challenges and opportunities to develop light-weight green composites materials for a wide range of applications. Thus wood-based composite materials from renewable forests may provide options for some niche applications while helping to protect our environment. In this paper, the wood-based tri-axial...

  12. Effects of Structural Damage on Dynamic Behavior at Sandwich Composite Beams – Part II- FEM Analysis

    Directory of Open Access Journals (Sweden)

    Marius Tufoi

    2014-07-01

    Full Text Available This paper presents results obtained by modal analysis on composite beam like structures in healthy and damaged state. The aim is to obtain damage “signatures” for all possible damage scenarios and to use these data to assess transversal cracks based on vibration techniques, by involving natural frequency shifts. The analysis was performed in SolidWorks software for a five-layer composite, 20 vibration modes being obtained by numerical simulation.

  13. Simultaneous tracer diffusion and interdiffusion in a sandwich-type configuration to provide the composition dependence of the tracer diffusion coefficients

    Science.gov (United States)

    Belova, I. V.; Kulkarni, N. S.; Sohn, Y. H.; Murch, G. E.

    2014-11-01

    In this paper, a new formalism of a combined tracer and interdiffusion experiment for a binary interdiffusion couple is developed. The analysis requires an interdiffusion couple that initially contains a thin layer of tracers of one or both of the constituent elements at the original interface of the couple (sandwich interdiffusion experiment). This type of interdiffusion experiment was first performed in 1958 by J.R. Manning. The theoretical analysis presented in this paper is based on a newly developed phenomenological theory of isotopic interdiffusion combined with the Boltzmann-Matano formalism. This new analysis now provides the means to obtain the composition dependent interdiffusion coefficient and tracer diffusion coefficients simultaneously from analysis of the interdiffusion and tracer profiles in a single sandwich interdiffusion experiment. The new analysis is successfully applied to the results of Manning's original 'sandwich interdiffusion' experiment in the Ag-Cd system (six couples in total) and is validated with an independent determination of the Ag and Cd tracer diffusion coefficients by Schoen using the conventional thin film technique. Suggestions for further development of the sandwich interdiffusion experiment and analysis to the case of multicomponent alloys are provided.

  14. Finite element reduction strategy for composite sandwich plates with viscoelastic layers

    Directory of Open Access Journals (Sweden)

    Adriana Amaro Diacenco

    2013-04-01

    Full Text Available Composite materials have been regarded as a convenient strategy in various types of engineering systems such as aeronautical and space structures, as well as architecture and light industry products due to their advantages over the traditional engineering materials, such as their high strength/stiffness relation characteristics and their anti-corrosion properties. This paper is devoted to the finite element modeling of composite laminated structures incorporating viscoelastic materials to the problem of vibration attenuation. However, the typically high dimension of large finite element models of composite structures incorporating viscoelastic materials makes the numerical processes sometimes unfeasible. Within this context, emphasis is placed on a general condensation strategy specially adapted for the case of viscoelastically damped structures, in which a constant (frequency- and temperature-independent reduction basis to be enriched by static residues associated to the applied loads and the viscoelastic forces is used. After presenting the theoretical foundations, the numerical applications of composite plates treated by viscoelastic materials are addressed, and the main features of the methodology are discussed.

  15. Finite element reduction strategy for composite sandwich plates with viscoelastic layers

    Directory of Open Access Journals (Sweden)

    Adriana Amaro Diacenco

    2012-01-01

    Full Text Available Composite materials have been regarded as a convenient strategy in various types of engineering systems such as aeronautical and space structures, as well as architecture and light industry products due to their advantages over the traditional engineering materials, such as their high strength/stiffness relation characteristics and their anti-corrosion properties. This paper is devoted to the finite element modeling of composite laminated structures incorporating viscoelastic materials to the problem of vibration attenuation. However, the typically high dimension of large finite element models of composite structures incorporating viscoelastic materials makes the numerical processes sometimes unfeasible. Within this context, emphasis is placed on a general condensation strategy specially adapted for the case of viscoelastically damped structures, in which a constant (frequency- and temperature-independent reduction basis to be enriched by static residues associated to the applied loads and the viscoelastic forces is used. After presenting the theoretical foundations, the numerical applications of composite plates treated by viscoelastic materials are addressed, and the main features of the methodology are discussed.

  16. Sandwich SrTiO{sub 3}/TiO{sub 2}/H-Titanate nanofiber composite photocatalysts for efficient photocatalytic hydrogen evolution

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yuanxu; Wang, Zhonglei; Wang, Wendong [Hefei National Laboratory for Physical Sciences at the Microscale, Collaborative Innovation Center of Suzhou Nano Science and Technology, CAS Key Laboratory of Materials for Energy Conversion, and Department of Chemical Physics, University of Science and Technology of China, Hefei 230026 (China); An, Xiaoqiang [Department of Chemical Engineering, University College London, London WC 1E 7JE (United Kingdom); Mi, Shiyang [Hefei National Laboratory for Physical Sciences at the Microscale, Collaborative Innovation Center of Suzhou Nano Science and Technology, CAS Key Laboratory of Materials for Energy Conversion, and Department of Chemical Physics, University of Science and Technology of China, Hefei 230026 (China); Tang, Junwang [Department of Chemical Engineering, University College London, London WC 1E 7JE (United Kingdom); Huang, Weixin, E-mail: huangwx@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at the Microscale, Collaborative Innovation Center of Suzhou Nano Science and Technology, CAS Key Laboratory of Materials for Energy Conversion, and Department of Chemical Physics, University of Science and Technology of China, Hefei 230026 (China)

    2014-10-01

    Graphical abstract: - Highlights: • SrTiO{sub 3}/TiO{sub 2}/H-titanate nanofiber composites with sandwich heterojunctions are prepared. • Sandwich heterojunctions largely improves the charge separation efficiency. • Photo-excited electrons exclusively transfer to photocatalytically active TiO{sub 2} component. • Sandwich composites are most active in the photocatalytic H{sub 2} evolution reaction. • Multi-heterojunctions strategy is proposed for efficient photocatalysts. - Abstract: SrTiO{sub 3}/TiO{sub 2}/H-Titanate nanofiber composites were synthesized through facile thermal treatment of Sr(OH){sub 2} and H-titanate nanofibers in an ethanol/water solution and their photocatalytic activities for H{sub 2} evolution from a methanol/water solution under simulated solar irradiation were evaluated. TiO{sub 2}/H-titanate nanofiber composites were acquired without Sr(OH){sub 2} addition. At low Sr/Ti molar ratios, SrTiO{sub 3}/TiO{sub 2}/H-titanate nanofiber composites form. SrTiO{sub 3} nanoparticles were found to selectively grow on the surface of TiO{sub 2} nanoparticles, forming a unique SrTiO{sub 3}-TiO{sub 2}-H-titanate sandwich heterojunction. Upon increasing the Sr/Ti molar ratio, the fraction of TiO{sub 2} in the resultant composites decreases and eventually SrTiO{sub 3}/H-titanate nanofiber composites form. SrTiO{sub 3}/TiO{sub 2}/H-titanate nanofiber composites are significantly more photocatalytically active than SrTiO{sub 3}/H-titanate nanofiber and TiO{sub 2}/H-titanate nanofiber composites due to the mitigated charge recombination and the accumulation of photo-excited electrons on the photocatalytically active TiO{sub 2} component. These results demonstrate an effective strategy of multi-heterojunctions with both appropriately-aligned band structures and appropriately-arranged composite structures to fabricate efficient composite photocatalysts.

  17. Circuit models for Salisbury screens made from unidirectional carbon fiber composite sandwich structures

    Science.gov (United States)

    Riley, Elliot J.; Lenzing, Erik H.; Narayanan, Ram M.

    2016-05-01

    Carbon fiber composite materials have many useful structural material properties. The electromagnetic perfor- mance of these materials is of great interest for future applications. The work presented in this paper deals with the construction of Salisbury screen microwave absorbers made from unidirectional carbon fiber composite sand- wich structures. Specifically, absorbers centered at 7.25 GHz and 12.56 GHz are investigated. Circuit models are created to match the measured performance of the carbon fiber Salisbury screens using a genetic algorithm to extract lumped element circuit values. The screens presented in this paper utilize unidirectional carbon fiber sheets in place of the resistive sheet utilized in the classic Salisbury screen. The theory, models, prototypes, and measurements of these absorbers are discussed.

  18. Mechanics properties of paulownia core sandwich composites%泡桐木夹层结构材料的力学性能

    Institute of Scientific and Technical Information of China (English)

    方海; 刘伟庆; 陆伟东; 万里

    2011-01-01

    Green paulownia sandwich composite material was manufactured by using paulownia tree. The mechanics properties of paulownia were better than that of balsa wood except weight, and it was low-cost. The light-weight high-performance paulownia core sandwich composites were manufactured by vacuum infusion molding process. The sandwich beams with different ratios of span to thickness were researched by three-point and four-point flexural test. The typical failure modes and the mechanism of innovative sandwich specimens were investigated. The flexural stiffness and the ultimate bearing capacity of sandwich composites were studied by ordinary sandwich beam theory. The analysis result agreed well with test result. The design method was presented based on the intensity demand.%选用泡桐木为原料,制备出夹层结构用泡桐木绿色夹芯材料,其木质纤维具有天然蜂窝形状,结构类似于目前航空航天领域常用的蜂窝芯材;泡桐木芯材除密度略高于Balsa轻木外,其他力学性能测试指标均优于轻木,同时在价格上占有绝对的优势.采用真空导入成型工艺,成功制备出轻质高强的泡桐木夹层复合材料,通过不同跨高比试件的三点与四点弯试验,研究其典型受力破坏形态与机制;利用经典夹层梁理论预佑试件抗弯刚度和受弯极限承载力,理论值与实测值符合较好,并以此为基础,提出了基于强度的优化设计方法.

  19. Dielectric behavior characterization of functional fibrous-ceramic/polymer nanocomposites

    OpenAIRE

    Dağdeviren, Canan; Dagdeviren, Canan

    2009-01-01

    This study is mainly focused on forming fibrous-ceramic/polymer nanocomposites and characterizing their dielectric behavior. The fibrous-ZnO/PVDF nanocomposite is prepared in two steps. First, a network of nano-scale zinc oxide (ZnO) fibers is produced by sintering electrospun PVA/Zinc Acetate fibers. Second, the ZnO fibrous non-woven mat is sandwiched between two polyvinylidine fluoride (PVDF) thermoplastic polymer films by hot-press casting. Referring to the extensive literature search with...

  20. Automated laser-based barely visible impact damage detection in honeycomb sandwich composite structures

    Energy Technology Data Exchange (ETDEWEB)

    Girolamo, D., E-mail: dgirola@ncsu.edu; Yuan, F. G. [National Institute of Aerospace, Integrated Structural Health Management Laboratory, Hampton, VA 23666 and North Carolina State University, Department of Mechanical and Aerospace Engineering, Raleigh, NC 27695 (United States); Girolamo, L. [North Carolina State University, Department of Mechanical and Aerospace Engineering, Raleigh, NC 27695 (United States)

    2015-03-31

    Nondestructive evaluation (NDE) for detection and quantification of damage in composite materials is fundamental in the assessment of the overall structural integrity of modern aerospace systems. Conventional NDE systems have been extensively used to detect the location and size of damages by propagating ultrasonic waves normal to the surface. However they usually require physical contact with the structure and are time consuming and labor intensive. An automated, contactless laser ultrasonic imaging system for barely visible impact damage (BVID) detection in advanced composite structures has been developed to overcome these limitations. Lamb waves are generated by a Q-switched Nd:YAG laser, raster scanned by a set of galvano-mirrors over the damaged area. The out-of-plane vibrations are measured through a laser Doppler Vibrometer (LDV) that is stationary at a point on the corner of the grid. The ultrasonic wave field of the scanned area is reconstructed in polar coordinates and analyzed for high resolution characterization of impact damage in the composite honeycomb panel. Two methodologies are used for ultrasonic wave-field analysis: scattered wave field analysis (SWA) and standing wave energy analysis (SWEA) in the frequency domain. The SWA is employed for processing the wave field and estimate spatially dependent wavenumber values, related to discontinuities in the structural domain. The SWEA algorithm extracts standing waves trapped within damaged areas and, by studying the spectrum of the standing wave field, returns high fidelity damage imaging. While the SWA can be used to locate the impact damage in the honeycomb panel, the SWEA produces damage images in good agreement with X-ray computed tomographic (X-ray CT) scans. The results obtained prove that the laser-based nondestructive system is an effective alternative to overcome limitations of conventional NDI technologies.

  1. Mechanical Property Analysis on Sandwich Structured Hybrid Composite Made from Natural Fibre, Glass Fibre and Ceramic Fibre Wool Reinforced with Epoxy Resin

    Science.gov (United States)

    Bharat, K. R.; Abhishek, S.; Palanikumar, K.

    2017-06-01

    Natural fibre composites find wide range of applications and usage in the automobile and manufacturing industries. They find lack in desired properties, which are required for present applications. In current scenario, many developments in composite materials involve the synthesis of Hybrid composite materials to overcome some of the lacking properties. In this present investigation, two sandwich structured hybrid composite materials have been made by reinforcing Aloe Vera-Ceramic Fibre Wool-Glass fibre with Epoxy resin matrix and Sisal fibre-Ceramic Fibre Wool-Glass fibre with Epoxy resin matrix and its mechanical properties such as Tensile, Flexural and Impact are tested and analyzed. The test results from the two samples are compared and the results show that sisal fibre reinforced hybrid composite has better mechanical properties than aloe vera reinforced hybrid composite.

  2. Sandwich Panels

    Directory of Open Access Journals (Sweden)

    N. Ramachandran

    1963-05-01

    Full Text Available This introductory article give an insight into the different methods employed in the construction of Sandwich panels, their limitations and future design application for defence use as a structural element with one of the highest strength-weight ratios yet devised.

  3. 三维中空复合材料在天线罩上的应用研究%Application of 3 D Hollow Sandwich Composite in Radome

    Institute of Scientific and Technical Information of China (English)

    张艳红; 耿杰; 匡宁; 李晋

    2015-01-01

    In view of the application environment and material performance requirements such as dielectric and me-chanical properties,processability,lifetime and weight,a type of hollow sandwich composite is presented. The struc-tural advantages of this composite material is fully demonstrated by detailing the properties of reinforcing fibers,the dielectric performance of resins,the advantages of sandwich structure and by comparing the performances of radomes in form of hollow sandwich structure and solid GRP structure.%介绍了天线罩使用环境,天线罩材料应满足的要求(介电性能、力学性能、三防寿命、工艺性能、重量等),透波材料的选取和三维中空复合材料。对比了各种增强纤维的性能、常用树脂的介电性能、夹芯材料性能以及中空夹芯结构与实心玻璃钢结构天线罩性能,充分体现了三维中空结构的天然结构优势。

  4. Three Dimensional Parametric Analyses on Effect of Fibre Orientation for Stress Concentration Factor in Fibrous Composite Cantilever Plate with Central Circular Hole under Transverse Loading

    Directory of Open Access Journals (Sweden)

    Nitin Jain

    2012-10-01

    Full Text Available Normal 0 false false false EN-IN X-NONE X-NONE ABSTRACT: A number of analytical and numerical techniques are available for the two dimensional study of stress concentration around the hole(s in isotropic and composite plates subjected to in-plane or transverse loading conditions. The information on the techniques for three dimensional analyses of stress concentration factor (SCF around the hole in isotropic and composite plates subjected to transverse loading conditions is, however, limited. The present work emphasizes on the effect of fibre orientation (q on the stress concentration factor in fibrous composite plates with central circular hole under transverse static loading condition. The work is carried out for cantilever fibrous composite plates. The effects of thickness -to- width (T/A and diameter-to-width (D/A ratios upon SCF at different fibre orientation are studied. Plates of four different composite materials were considered for hole analysis in order to determine the sensitivity of SCF with elastic constants. Deflections in transverse direction were calculated and analysed. All results are presented in graphical form and discussed. The finite element formulation and its analysis were carried out using ANSYS package.ABSTRAK: Terdapat pelbagai teknik analitikal dan numerical untuk kajian tumpuan tegasan dua dimensi di sekeliling lubang-lubang dalam komposit isotropik dan plat pada satah atau keadaan bebanan melintang. Bagaimanapun, maklumat mengenai kaedah analisis tiga dimensi untuk faktor ketumpatan tegasan (SCF sekitar lubang dalam komposit isotropik dan plat pada keadaan bebanan melintang adalah terhad. Kertas ini menekankan kesan orientasi gentian (q pada faktor tumpuan tegasan dalam komposit plat bergentian dengan lubang berpusat di bawah keadaan bebanan melintang. Kajian ini dilkukan untuk cantilever plat komposit bergentian. Kesan ketebalan terhadap kelebaran plat (T/A dan diameter terhadap kelebaran komposit (D/A dengan SCF

  5. Properties of Cf/PI Honeycomb Sandwich Composites%Cf/PI蜂窝夹层结构性能

    Institute of Scientific and Technical Information of China (English)

    赵伟栋; 潘玲英; 蒋文革; 王会平

    2011-01-01

    为了提高蜂窝夹层结构的耐热性和高温力学性能,采用石英灯和力学性能测试的方法进行了相关性能测试.弯曲性能测试结果表明,UT500/KH370蜂窝夹层面板的弯曲强度400℃保持率为58%,弯曲模量保持率为85%,层间剪切强度保持率为57%;石英灯静态隔热试验结果表明,冷壁热流为300 kW/m2的条件下,高度为29mm的蜂窝夹层板的背温为320℃;冷壁热流为168 kW/m2的条件下,背温为296℃.%In order to enhance the heat resistant and mechanical properties of honeycomb sandwich at high temperature , the test of mechanical properties and heat insulation properties with static quartz lamp are carried out. The result shows that the retaining rate of flexural strength,moduli and interlaminate of panel are 58% ,85% and 57% .respectively. After the sample heated by static quartz lamp,with 300 kW/m2 and 168 kW/m2 heat flux for 180 s.the back temperature of honeycomb structural composites are 320t! And 2961, respectively.

  6. Fibrous polymer-grafted chitosan/clay composite beads as a carrier for immobilization of papain and its usability for mercury elimination.

    Science.gov (United States)

    Metin, Ayşegül Ülkü; Alver, Erol

    2016-07-01

    Papain, which is an industrially important enzyme, has been immobilized on fibrous polymer-modified composite beads, namely poly(methacrylic acid)-grafted chitosan/clay. Characterization studies have been done using FTIR and SEM analysis. Operating parameters such as pH and initial concentration of papain have been varied to obtain the finest papain immobilized polymer-modified composite beads. The immobilization capacity of composite beads has been determined as 34.47 ± 1.18 (n = 3) mg/g. The proteolytic activity of immobilized papain was operated using bovine serum albumin (BSA) and maximum velocity (V max) and Michaelis-Menten constant (Km) values of the free and immobilized enzymes were determined using Lineweaver-Burk and Eadie-Hofstee equations. Usability of papain immobilized polymer-modified composite beads as adsorbents for the elimination of mercury was investigated. The maximum removal capacity of PIPMC beads has been found to be 4.88 ± 0.21 mg Hg/g when the initial metal concentration and weight of polymer-modified composite beads were 50 mg/L and 0.04 g at pH 7, respectively. Mercury removal performance of the papain immobilized polymer-modified composite beads was investigated in conjunction with Cu (II), Zn (II) and Cd (II) ions. The mercury adsorption capacity of papain immobilized polymer-modified composite beads was a slight reduction from 1.15 to 0.89 mg/g in presence of multiple metal salts.

  7. Development of Aircraft Sandwich Parts

    Directory of Open Access Journals (Sweden)

    J. Křena

    2000-01-01

    Full Text Available The presented paper shows the design and development process of sandwich parts. A spoiler plate and a main landing gear door are developed. Sandwich parts are made of C/E composite facings and a foam core. FE models have been used for optimization of structures. Emphasis has been placed on deformations of parts under a few load cases. Experimental tests have been used for a verification of structure parts loaded by concentrated forces.

  8. Fatigue characterization of Poly Vinyl Chloride (PVC) foam core sandwich composite using the G-control method

    DEFF Research Database (Denmark)

    Manca, Marcello; Berggreen, Christian; Carlsson, Leif A.

    2016-01-01

    This paper presents experimental results from cyclic crack propagation tests performed on sandwich specimens with glass/epoxy face sheets and Poly Vinyl Chloride (PVC) foam cores using the G-controlled cyclic energy release rate (ΔG) test procedure. The face material was tested in tension......, compression and shear to determine in-plane and out-of-plane mechanical properties, such as Young’s modulus, Poisson’s ratio and shear modulus. These properties were then used in an analytical model of the mixed-mode bending sandwich specimen to calculate compliance and energy release rate. Finite element...... analysis was used to determine the mode-mixity of the crack loading. Experimental crack growth cyclic tests were carried out on pre-cracked mixed-mode bending sandwich specimens with H45, H100 and H160 PVC foam cores under two mode-mixities (mode I and mode II dominant). Post-mortem analysis was performed...

  9. Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: Effect of inherent material damping

    Science.gov (United States)

    Arunkumar, M. P.; Jagadeesh, M.; Pitchaimani, Jeyaraj; Gangadharan, K. V.; Babu, M. C. Lenin

    2016-11-01

    This paper presents the results of numerical studies carried out on vibro-acoustic and sound transmission loss behaviour of aluminium honeycomb core sandwich panel with fibre reinforced plastic (FRP) facings. Layered structural shell element with equivalent orthotropic elastic properties of core and orthotropic properties of FRP facing layer is used to predict the free and forced vibration characteristics. Followed by this, acoustic response and transmission loss characteristics are obtained using Rayleigh integral. Vibration and acoustic characteristics of FRP sandwich panels are compared with aluminium sandwich panels. The result reveals that FRP panel has better vibro-acoustic and transmission loss characteristics due to high stiffness and inherent material damping associated with them. Resonant amplitudes of the response are fully controlled by modal damping factors calculated based on modal strain energy. It is also demonstrated that FRP panel can be used to replace the aluminium panel without losing acoustic comfort with nearly 40 percent weight reduction.

  10. Fibrous Polymeric Composites Based on Alginate Fibres and Fibres Made of Poly-ε-caprolactone and Dibutyryl Chitin for Use in Regenerative Medicine

    Directory of Open Access Journals (Sweden)

    Elżbieta Menaszek

    2013-03-01

    Full Text Available This work concerns the production of fibrous composite materials based on biodegradable polymers such as alginate, dibutyryl chitin (DBC and poly-ε-caprolactone (PCL. For the production of fibres from these polymers, various spinning methods were used in order to obtain composite materials of different composition and structure. In the case of alginate fibres containing the nanoadditive tricalcium phosphate (TCP, the traditional method of forming fibres wet from solution was used. However in the case of the other two polymers the electrospinning method was used. Two model systems were tested for biocompatibility. The physicochemical and basic biological tests carried out show that the submicron fibres produced using PCL and DBC have good biocompatibility. The proposed hybrid systems composed of micrometric fibres (zinc and calcium alginates containing TCP and submicron fibres (DBC and PCL meet the requirements of regenerative medicine. The biomimetic fibre system, the presence of TCP nanoadditive, and the use of polymers with different resorption times provide a framework with specific properties on which bone cells are able to settle and proliferate.

  11. Novel electrochemical dual-aptamer-based sandwich biosensor using molybdenum disulfide/carbon aerogel composites and Au nanoparticles for signal amplification.

    Science.gov (United States)

    Fang, Lin-Xia; Huang, Ke-Jing; Liu, Yang

    2015-09-15

    A new electrochemical aptamer biosensor for the platelet-derived growth factor BB (PDGF-BB) detection has been developed based on the signal amplification of MoS2/carbon aerogel composites (MoS2/CA) and sandwich assay. A facile hydrothermal route assisted by L-cysteine was applied to synthesize CA incorporated flower-like MoS2 with the large surface active sites and good conductivity. The electrochemical aptasensor was constructed by sandwiching the PDGF-BB between a glassy carbon electrode modified with thiol-terminated PDGF-BB aptamer-1 (Apt1)/gold nanoparticles (AuNPs)/MoS2/CA and the AuNPs with thiol-terminated PDGF-BB aptamer-2 (Apt2) and 6-ferrocenyl hexanethiol (Fc). Fc-AuNPs-Apt2 acted as tracer and AuNPs/MoS2/CA were utilized as the biosensor platform to immobilize a large amount of capture aptamers, owing to their layered structure and high surface-to-volume ratio. Based on the sandwich format, a dual signal amplification strategy had been successfully developed with a wide linear response in the range of 0.001-10nM and a limit of detection of 0.3 pM. The developed assay demonstrated good selectivity and high sensitivity, indicating potential applications in bioanalysis and biomedicine.

  12. Interconnected sandwich structure carbon/Si-SiO2/carbon nanospheres composite as high performance anode material for lithium-ion batteries

    Institute of Scientific and Technical Information of China (English)

    Yuanjin Du; Mengyan Hou; Dandan Zhou; Yonggang Wang; Congxiao Wang; Yongyao Xia

    2014-01-01

    In the present work, an interconnected sandwich carbon/Si-SiO2/carbon nanospheres composite was prepared by template method and carbon thermal vapor deposition (TVD). The carbon conductive layer can not only efficiently improve the electronic conductivity of Si-based anode, but also play a key role in alleviating the negative effect from huge volume expansion over discharge/charge of Si-based anode. The resulting material delivered a reversible capacity of 1094 mAh/g, and exhibited excellent cycling stability. It kept a reversible capacity of 1050 mAh/g over 200 cycles with a capacity retention of 96%.

  13. The effect of particle addition and fibrous reinforcement on epoxy-matrix composites for severe sliding conditions

    DEFF Research Database (Denmark)

    Larsen, Thomas Ricco Ølholm; Løgstrup Andersen, Tom; Thorning, Bent

    2008-01-01

    This paper reports production and tribological testing of epoxy-matrix composites for dry-sliding conditions. The examined composites are produced using the following components: epoxy resin (EP), glass fiber weave (G), carbon/aramid hybrid weave (CA), PTFE particles and nano-scale CuO particles...... pv conditions all tested composites show signs of decomposition. Despite this, glass fiber reinforcement has a relatively steady behavior while carbon/aramid reinforcement gives raise to a gradually increasing frictional force, which ultimately results in complete failure of the test-specimen. (c...

  14. Effects of fibrous fillers on friction and wear properties of polytetrafluoroethylene composites under dry or wet conditions

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The friction and wear behavior and mechanism as well as the mechanical properties of polytetrafluoroethylene (PTFE) composites filled with potassium titanate whiskers (PTW) and short carbon fibers (CF) under dry, wet and alkaline conditions were investigated. Experiments indicated that owing to appropriate cooling and boundary lubricating effects, the filled PTFE composites showed much lower frictional coefficient and better wear resistance under alkaline than dry and wet sliding conditions. The wear resistance of carbon-fiber-filled PTFE was much better than that of potassium titanate-whisker-filled PTFE composites in water. Results also showed that the transfer film on counterpart rings was significantly hindered by water and alkali. Hydrophilic-filler-reinforced PTFE composites yield higher wear rate when sliding under water.

  15. A Damage Tolerance Comparison of Composite Hat-Stiffened and Honeycomb Sandwich Structure for Launch Vehicle Interstage Applications

    Science.gov (United States)

    Nettles, A. T.

    2011-01-01

    In this study, a direct comparison of the compression-after-impact (CAI) strength of impact-damaged, hat-stiffened and honeycomb sandwich structure for launch vehicle use was made. The specimens used consisted of small substructure designed to carry a line load of approx..3,000 lb/in. Damage was inflicted upon the specimens via drop weight impact. Infrared thermography was used to examine the extent of planar damage in the specimens. The specimens were prepared for compression testing to obtain residual compression strength versus damage severity curves. Results show that when weight of the structure is factored in, both types of structure had about the same CAI strength for a given damage level. The main difference was that the hat-stiffened specimens exhibited a multiphase failure whereas the honeycomb sandwich structure failed catastrophically.

  16. Plate Deformation Behavior of Polymer Matrix Composite-Ti Honeycomb-Metal Sandwiches for Pressurized Propulsion Component Applications

    Science.gov (United States)

    Bertelsen, William D.; Shin, E. eugene; Thesken, John C.; Sutter, James K.; Martin, Rich

    2004-01-01

    THe objectives are: 1. To experimentally validate bi-axial plate flexural performance of PMC-Ti H/C-A286 sandwich panels for the internally pressurized RBCC combustion chamber support structure. 2. To explore ASTM 2-D plate flexure test (D 6416) to simulate the internal pressure loading and to correlate the results with analytical and FE modeling based on 2-D flexure properties.

  17. 蜂窝夹层复合材料不确定性参数识别方法%Parameter identification approach of honeycomb sandwich composite with uncertainties

    Institute of Scientific and Technical Information of China (English)

    姜东; 吴邵庆; 费庆国; 韩晓林

    2015-01-01

    An approach of parameter identification for predicting uncertainties in honeycomb sandwich composite is provided.The initial finite element model of a honeycomb plate is constructed by the application of an appropriate sandwich theory,in which the equivalent parameters were predicted by homogenization method.According to the analysis of the internal honeycomb structure and the relative sensitivity of eigenvalues with respect to system parameters,the sensitive parameters including the uncertainties (Gcxz,Gcyz and thickness of the face sheet)are selected to be identified. Through modal experiments of six different honeycomb plates with free-free boundary condition,the mean values and deviations of the modal frequencies are obtained,using which the uncertain parameter identification of honeycomb sandwich plate is conducted.Identification results show that when considering the uncertainty in honeycomb sandwich composite,the proposed identification method can be used for accurately identifying the mean values and deviations of the uncertain parameters and the dynamical finite element model with statistical significance can be constructed.%提出蜂窝夹层复合材料不确定性参数识别方法。采用三明治夹芯板理论建立铝蜂窝夹层结构的初始有限元模型,其中芯层等效弹性参数由均匀化方法计算。据芯层结构及相对灵敏度分析,选存在不确定性且对动态特性敏感性较大的面外剪切模量及面板厚度为待识别参数。对6块铝蜂窝复合材料板进行自由-自由边界条件下动态试验,获得试验模态参数的均值及标准差。据试验结果采用所提方法识别铝蜂窝夹层板不确定性参数。结果表明,对存在不确定性参数的铝蜂窝夹层复合材料用该方法能准确识别参数的均值及标准差,并建立具有准确统计意义的动力学模型。

  18. Manipulation of chemical composition and architecture of non-biodegradable poly(ethylene terephthalate)/chitosan fibrous scaffolds and their effects on L929 cell behavior.

    Science.gov (United States)

    Veleirinho, Beatriz; Berti, Fernanda V; Dias, Paulo F; Maraschin, Marcelo; Ribeiro-do-Valle, Rosa M; Lopes-da-Silva, José A

    2013-01-01

    Microporous, non-woven fibrous scaffolds made of poly(ethylene terephthalate) and chitosan were produced by electrospinning. Fiber morphology, diameter, pore size, and wettability were manipulated by varying the chemical composition of the electrospinning solution, i.e. chitosan concentration and molecular weight, and by post-electrospinning treatment with glutaraldehyde. In vitro studies were conducted using a fibroblast cell line toward a comprehensive understanding of how scaffolds characteristics can modulate the cell behavior, i.e. viability, adhesion, proliferation, extracellular matrix secretion, and three-dimensional colonization. Substantial differences were found as a result of scaffold morphological changes. Higher levels of adhesion, spreading, and superficial proliferation were achieved for scaffolds with smaller fiber and pore diameters while cell penetration and internal colonization were enhanced for scaffolds with larger pores. Additionally, the available area for cell adhesion, which is related to fiber and pore size, was a crucial factor for the viability of L929 cells. This paper provides significant insights for the development and optimization of electrospun scaffolds toward an improved biological performance.

  19. Manipulation of chemical composition and architecture of non-biodegradable poly(ethylene terephthalate)/chitosan fibrous scaffolds and their effects on L929 cell behavior

    Energy Technology Data Exchange (ETDEWEB)

    Veleirinho, Beatriz [QOPNA Research Unit, Department of Chemistry, University of Aveiro, 3810-193 Aveiro (Portugal); Berti, Fernanda V. [Integrated Technologies Laboratory, Chemical and Food Engineering Department, Federal University of Santa Catarina, 88040-900 Florianopolis (Brazil); Dias, Paulo F. [Department of Cell Biology, Embryology and Genetics, Federal University of Santa Catarina, 88040-900 Florianopolis (Brazil); Maraschin, Marcelo [Department of Plant Science, Federal University of Santa Catarina, 88040-900 Florianopolis (Brazil); Ribeiro-do-Valle, Rosa M. [Department of Pharmacology, Federal University of Santa Catarina, 88040-900 Florianopolis (Brazil); Lopes-da-Silva, Jose A., E-mail: jals@ua.pt [QOPNA Research Unit, Department of Chemistry, University of Aveiro, 3810-193 Aveiro (Portugal)

    2013-01-01

    Microporous, non-woven fibrous scaffolds made of poly(ethylene terephthalate) and chitosan were produced by electrospinning. Fiber morphology, diameter, pore size, and wettability were manipulated by varying the chemical composition of the electrospinning solution, i.e. chitosan concentration and molecular weight, and by post-electrospinning treatment with glutaraldehyde. In vitro studies were conducted using a fibroblast cell line toward a comprehensive understanding of how scaffolds characteristics can modulate the cell behavior, i.e. viability, adhesion, proliferation, extracellular matrix secretion, and three-dimensional colonization. Substantial differences were found as a result of scaffold morphological changes. Higher levels of adhesion, spreading, and superficial proliferation were achieved for scaffolds with smaller fiber and pore diameters while cell penetration and internal colonization were enhanced for scaffolds with larger pores. Additionally, the available area for cell adhesion, which is related to fiber and pore size, was a crucial factor for the viability of L929 cells. This paper provides significant insights for the development and optimization of electrospun scaffolds toward an improved biological performance. Highlights: Black-Right-Pointing-Pointer Hybrid PET/chitosan mats were produced by electrospinning. Black-Right-Pointing-Pointer Scaffold architecture was manipulated by changing composition of the spun solution. Black-Right-Pointing-Pointer The scaffolds showed in vitro biocompatibility to L929 cells. Black-Right-Pointing-Pointer Smaller fiber diameters and pore areas allowed for higher levels of cell adhesion and proliferation. Black-Right-Pointing-Pointer A 3D cell colonization was achieved for scaffolds with higher fiber diameters.

  20. THE YIELD AND CHEMICAL COMPOSITION OF MILK OF COWS FED THE RATION WITH PROTEIN-FIBROUS-EXTRUDERATE

    Directory of Open Access Journals (Sweden)

    Andrzej TARKOWSKI

    2009-06-01

    Full Text Available The present research evaluated the effect of protein-fi brous extruderate on yield and chemical composition of milk obtained cows. Protein-fi brous extruderate produced from dry sida (Sida hermaphrodita (L Rusby and horse bean meal was compared to a standard concentrate mixture “B” comprising maize silage and meadow hay. Daily yield milk appeared to be comparable between two treatment groups, one fed a protein-fi brous extruderate supplemented diet and other – a standard concentrate. A higher fat and protein content was determined in milk from cows with a dietary protein-fi brous extruderate additive.

  1. Non-linear analytical solutions for laterally loaded sandwich plates

    DEFF Research Database (Denmark)

    Riber, Hans Jørgen

    1997-01-01

    This work focuses on the response of orthotropic sandwich composite plates with large deflections due to high lateral loads. The results have special application to the design of ship structures. A geometrical nonlinear theory is outlined, on the basis of the classical sandwich plate theory...... of sandwich plates subjected to high lateral loading. (C) 1997 Published by Elsevier Science Ltd. All rights reserved....

  2. The ultimate state of polymeric materials and laminated and fibrous composites under asymmetric high-cycle loading

    Science.gov (United States)

    Golub, V. P.; Pogrebniak, A. D.; Kochetkova, E. S.

    2008-01-01

    The prediction of the high-cycle fatigue strength of polymeric and composite materials in asymmetric loading is considered. The problem is solved on the basis of a nonlinear model of ultimate state allowing us to describe all typical forms of the diagrams of ultimate stresses. The material constants of the model are determined from the results of fatigue tests in symmetric reversed cycling, in a single fatigue test with the minimum stress equal to zero, and in a short-term strength test. The fatigue strength characteristics of some polymers, glass-fiber laminates, glass-fiber-reinforced plastics, organic-fiber-reinforced plastics, and wood laminates in asymmetric tension-compression, bending, and torsion have been calculated and approved experimentally.

  3. Experimental study of partially-cured Z-pins reinforced foam core composites:K-Cor sandwich structures

    Institute of Scientific and Technical Information of China (English)

    Zheng Yingying; Xiao Jun; Duan Mufeng; Li Yong

    2014-01-01

    This paper presents an experimental study of a novel K-Cor sandwich structure rein-forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry (DSC) and optical microscopy (OM) methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel (CDP) tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan-ical performances of K-Cor sandwich structures.

  4. Experimental study of partially-cured Z-pins reinforced foam core composites: K-Cor sandwich structures

    Directory of Open Access Journals (Sweden)

    Zheng Yingying

    2014-02-01

    Full Text Available This paper presents an experimental study of a novel K-Cor sandwich structure reinforced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry (DSC and optical microscopy (OM methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel (CDP tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechanical performances of K-Cor sandwich structures.

  5. Craniofacial fibrous dysplasia

    Directory of Open Access Journals (Sweden)

    Aakarsh Jhamb

    2012-01-01

    Full Text Available Fibrous dysplasia can present clinically in varied forms which may appear as collision of different pathologic processes. We report a rare case of craniofacial fibrous dysplasia with coexisting epithelial lined cyst and superimposed osteomyelitis with sequestrum formation. Its clinical features and management with possible hypotheses are described along with the post operative course. Pertinent literature has been reviewed with emphasis on pathogenesis of this unique occurrence.

  6. Coated/Sandwiched rGO/CoSx Composites Derived from Metal-Organic Frameworks/GO as Advanced Anode Materials for Lithium-Ion Batteries.

    Science.gov (United States)

    Yin, Dongming; Huang, Gang; Zhang, Feifei; Qin, Yuling; Na, Zhaolin; Wu, Yaoming; Wang, Limin

    2016-01-22

    Rational composite materials made from transition metal sulfides and reduced graphene oxide (rGO) are highly desirable for designing high-performance lithium-ion batteries (LIBs). Here, rGO-coated or sandwiched CoSx composites are fabricated through facile thermal sulfurization of metal-organic framework/GO precursors. By scrupulously changing the proportion of Co(2+) and organic ligands and the solvent of the reaction system, we can tune the forms of GO as either a coating or a supporting layer. Upon testing as anode materials for LIBs, the as-prepared CoSx -rGO-CoSx and rGO@CoSx composites demonstrate brilliant electrochemical performances such as high initial specific capacities of 1248 and 1320 mA h g(-1) , respectively, at a current density of 100 mA g(-1) , and stable cycling abilities of 670 and 613 mA h g(-1) , respectively, after 100 charge/discharge cycles, as well as superior rate capabilities. The excellent electrical conductivity and porous structure of the CoSx /rGO composites can promote Li(+) transfer and mitigate internal stress during the charge/discharge process, thus significantly improving the electrochemical performance of electrode materials.

  7. Development and Evaluation of Stitched Sandwich Panels

    Science.gov (United States)

    Stanley, Larry E.; Adams, Daniel O.; Reeder, James R. (Technical Monitor)

    2001-01-01

    This study explored the feasibility and potential benefits provided by the addition of through-the-thickness reinforcement to sandwich structures. Through-the-thickness stitching is proposed to increase the interlaminar strength and damage tolerance of composite sandwich structures. A low-cost, out-of-autoclave processing method was developed to produce composite sandwich panels with carbon fiber face sheets, a closed-cell foam core, and through-the-thickness Kevlar stitching. The sandwich panels were stitched in a dry preform state, vacuum bagged, and infiltrated using Vacuum Assisted Resin Transfer Molding (VARTM) processing. For comparison purposes, unstitched sandwich panels were produced using the same materials and manufacturing methodology. Test panels were produced initially at the University of Utah and later at NASA Langley Research Center. Four types of mechanical tests were performed: flexural testing, flatwise tensile testing, core shear testing, and edgewise compression testing. Drop-weight impact testing followed by specimen sectioning was performed to characterize the damage resistance of stitched sandwich panels. Compression after impact (CAI) testing was performed to evaluate the damage tolerance of the sandwich panels. Results show significant increases in the flexural stiffness and strength, out-of-plane tensile strength, core shear strength, edgewise compression strength, and compression-after-impact strength of stitched sandwich structures.

  8. Fibrous microcapsules and methods of assembly and use thereof

    Energy Technology Data Exchange (ETDEWEB)

    Stupp, Samuel; Rozkiewicz, Dorota

    2015-01-27

    The present invention relates to assembly of peptide amphiphiles and biopolymers into fibrous microcapsules, and uses thereof. In particular, the present invention provides devices, compositions, and methods for interfacial self-assembly of peptide amphiphiles and biopolyments into fibrous microcapsules, and uses thereof.

  9. Sandwich DIY

    Institute of Scientific and Technical Information of China (English)

    肖蕾

    2006-01-01

    我们都知道sandwich是一种方便食品,就是在两片面包中加上一些肉和蔬菜。Sandwich这个名字来源于英国的一位桑威治伯爵(Earl of Sandwich)。据说这位伯爵嗜赌如命,就是到吃饭的时候也不愿停下来。于是他就叫侍者把肉、蛋、菜夹在面包片中,让他拿在手上边赌边吃。后来人们就把这种夹馅面包叫做sandwich。现在sandwich已成为风靡世界的快餐食品(snack)了。Sandwich的做法其实很简单。如果你有两片面包,你几乎可以在这两片面包之间夹上任何食物来给自己做一个三明治。下面就让我们试一试,做一个三明治来吃。第一步:在一片面包上抹上黄油(butter)或植物黄油,在另一片面包上抹上蛋黄酱(mayonnaise)和芥末酱(mustard)。喜欢吃番茄酱(catsup)也可以放番茄酱!第二步:把花生酱(peanut butter)或者乳酪片(cream)、熟肉片放在涂了黄油的面包片上。想吃什么肉就放什么肉,香肠也可以!第三步:在乳酪上面放酸黄瓜片、番茄片和生菜。也可以根据个人的口味再放些乳酪、芥末酱和(或)番茄酱、洋葱、辣椒、盐、黑胡椒和醋。第四步:将第二片面包盖在上面,就做成了一个sand...

  10. Enhancement in the microstructure and neutron shielding efficiency of sandwich type of 6061Al–B{sub 4}C composite material via hot isostatic pressing

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin-Ju, E-mail: jinjupark@kaeri.re.kr [Nuclear Materials Development Division, Korea Atomic Energy Research Institute (KAERI), 1045 Daedeokdaero, Yuseong, Daejon 305-353 (Korea, Republic of); Hong, Sung-Mo [Nuclear Materials Development Division, Korea Atomic Energy Research Institute (KAERI), 1045 Daedeokdaero, Yuseong, Daejon 305-353 (Korea, Republic of); Division of Advanced Materials Engineering, Kongju National University, Cheonan 330-717 (Korea, Republic of); Lee, Min-Ku; Rhee, Chang-Kyu [Nuclear Materials Development Division, Korea Atomic Energy Research Institute (KAERI), 1045 Daedeokdaero, Yuseong, Daejon 305-353 (Korea, Republic of); Rhee, Won-Hyuk [Daewha Alloytech, Dangjin 343-882 (Korea, Republic of)

    2015-02-15

    Highlights: • 6061Al–B{sub 4}C neutron shielding composites are fabricated by sintering and HIP. • HIP process improves the wettability of B{sub 4}C particles into 6061Al matrix. • Neutron attenuation performance can be enhanced by application of HIP process. - Abstract: Sandwich type of 6061Al–B{sub 4}C composite plates, which are used as a thermal neutron absorber for spent nuclear fuel pool storage rack, were fabricated using two different consolidation ways as sintering and hot isostatic pressing (HIP) processes and their thermal neutron shielding efficiency was investigated as a function of B{sub 4}C concentration ranging from 0 to 40 wt.%. For this purpose, two respective inner core compaction parts of sintered and HIPped neutron absorbing composite materials were first produced and then cladded them between two outer plates by HIP process. The application of HIP process provided not only a lead of excellent interfacial adhesion due to the improved wettability but also an enhancement of thermal neutron shielding efficiency owing to the more uniform dispersion of B{sub 4}C particles.

  11. Polyaniline coated carbon nanotube/graphene "sandwich" hybrid and its high-k epoxy composites with low dielectric loss and percolation threshold

    Science.gov (United States)

    Wang, Tongxing; Yuan, Li; Liang, Guozheng; Gu, Aijuan

    2015-12-01

    Fabricating high-k conductor/polymer composites with low dielectric loss and percolation threshold is still a challenge, while the electric conductor is the key factor of determining the dielectric behavior of composites. A novel hybridized conductor with "sandwich" structure (rPANI@CNT-rGO) and active groups was prepared by introducing polyaniline coated carbon nanotube (rPANI@CNT) on the surface of reduced graphene oxide (rGO) through electrostatic and π-π conjugate forces. And the rPANI@CNT-rGO hybrids with different loadings of rPANI@CNT were introduced into epoxy resin (EP) to prepare a series of rPANI@CNT-0.75rGO/EP composites; meanwhile rPANI@CNT and rGO were mechanically blended with EP to prepare rPANI@CNT/0.75rGO/EP composites for comparison. rPANI@CNT/0.75rGO/EP composites have low dielectric constant (10-20), whereas the dielectric constant at 100 Hz of the 7rPANI@CNT-0.75rGO/EP composite with 0.75 wt% rPANI@CNT is as high as 210, much larger than those of rPANI@CNT/EP, 0.75rGO/EP and rPANI@CNT/0.75rGO/EP composites. Meanwhile, the dielectric loss at 100 Hz of 7rPANI@CNT-0.75rGO/EP composite is only 17% of that of 0.75rGO/EP, indicating that the dielectric behavior of rPANI@CNT-0.75rGO/EP composites is not originated from a simple addition of basic components, but has an obvious synergistic effect. The percolation threshold of rPANI@CNT-0.75rGO/EP composites is only 1.1 wt%. The origin of these attractive dielectric properties was revealed through systematically discussing the structures and simulated circuits of rPANI@CNT-0.75rGO/EP composites.

  12. Structure and Fibrous Composition of the Egg Case of Spider Argiolpe bruennichi%横纹金蛛卵袋结构与纤维组成

    Institute of Scientific and Technical Information of China (English)

    蒋平; 吕太勇; 肖永红; 江丽琴; 熊超群; 郭聪

    2011-01-01

    The structures and fibrous composition of egg case of the spider (Argiope bruennichi) were examined using SEM as well as amino acid analysis. The egg case is composed of multiple layers of silk, including the frame, outer cover, cover cap, inner cover, egg cover cap and egg wrapping cover, and formed by different colored silk with diameters between hundreds of nanometers and several micrometers. The amino acid composition was similar in the frame silk and typical dragline silk, glycine ( about 37% ) and alanine ( about 25% ) are the most abundant amino acids present, and glutamic acid (about 10% ) , prone (about 7% ) and serine ( about 5% ) as the next most abundant. The amino acid composition of cover silk was similar with typical cylindrical gland silk. In contrast to the frame silk, all cover silk of egg case contained a significant proportion of the serine ( about 22% ) and less glycine ( about 7% ) and prone ( about 2% ), and contained more polar amino and large side acids. The original gland that produce silk fibers with different diameters was analyzed based on the results of SEM and amino acid composition studies.%采用SEM和氨基酸自动分析仪对横纹金蛛(Argiope bruennichi)卵袋的超微结构与氨基酸组成进行了观察研究.结果表明,横纹金蛛卵袋呈封闭的葫形,是由多种丝腺纺出的微米与纳米级的丝纤维形成的多个覆盖层构成,具有多层复杂结构,从外向内分别为:框架、卵袋覆盖帽、外覆盖层和内覆盖层、卵块覆盖帽、卵块包裹层,其中外覆盖层与卵袋覆盖帽内侧面的丝较外侧面的丝排列规则均匀.卵袋框丝与典型的拖牵丝(大壶状腺丝)氨基酸组成相似,甘氨酸和丙氨酸的含量最丰富,分别约占37%和25%,其次是谷氨酸、脯氨酸和丝氨酸,分别约占10%、7%和5%;其余卵袋丝纤维的氨基酸组成与典型的柱状腺丝相似.与卵袋框丝相比,卵袋覆盖层的丝氨酸含量显

  13. High temperature structural sandwich panels

    Science.gov (United States)

    Papakonstantinou, Christos G.

    High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

  14. Enzymes in bast fibrous plant processing.

    Science.gov (United States)

    Kozlowski, Ryszard; Batog, Jolanta; Konczewicz, Wanda; Mackiewicz-Talarczyk, Maria; Muzyczek, Malgorzata; Sedelnik, Natalia; Tanska, Bogumila

    2006-05-01

    The program COST Action 847 Textile Quality and Biotechnology (2000-2005) has given an excellent chance to review the possibilities of the research, aiming at development of the industrial application of enzymes for bast fibrous plant degumming and primary processing. The recent advancements in enzymatic processing of bast fibrous plants (flax, hemp, jute, ramie and alike plants) and related textiles are given. The performance of enzymes in degumming, modification of bast fibres, roving, yarn, related fabrics as well as enzymatic bonding of lignocellulosic composites is provided.

  15. Benign Fibrous Histiocytoma

    Directory of Open Access Journals (Sweden)

    Pushpa Varma

    2014-01-01

    Full Text Available Fibrous histiocytomas (FHs are mesenchymal tumors that may be benign or malignant. Ocular involvement by FHs is infrequent and primarily limited to the orbit. Rarely, FHs can also involve the conjunctiva and perilimbal area. We report the case of a 38-year-old male with lid, conjunctival, and neck FHs. The diagnosis was confirmed by histopathology.

  16. Calvarial malignant fibrous histiocytoma

    Directory of Open Access Journals (Sweden)

    Chhabra R

    2004-07-01

    Full Text Available Primary malignant fibrous histiocytoma (MFH of the central nervous system (CNS is uncommon. We report cases of two young patients of MFH arising from the cranial meninges and involving the adjacent skull and scalp. There was infiltration of the brain in one case. Both the lesions were excised and primary scalp repair was performed.

  17. Gastric Calcifying Fibrous Tumour

    Directory of Open Access Journals (Sweden)

    Tan Attila

    2006-01-01

    Full Text Available Intramucosal gastric tumours are most commonly found to be gastrointestinal stromal tumours or leiomyomas (smooth muscle tumours; however, a variety of other uncommon mesenchymal tumours can occur in the stomach wall. A rare benign calcifying fibrous tumour is reported and the endoscopic appearance, ultrasound findings and morphology are documented. A review of the literature found only two similar cases.

  18. Ultrasensitive sandwich-type photoelectrochemical immunosensor based on CdSe sensitized La-TiO2 matrix and signal amplification of polystyrene@Ab2 composites.

    Science.gov (United States)

    Fan, Dawei; Ren, Xiang; Wang, Haoyuan; Wu, Dan; Zhao, Di; Chen, Yucheng; Wei, Qin; Du, Bin

    2017-01-15

    A novel and sensitive sandwich-type photoelectrochemical (PEC) sensor was fabricated using signal amplification strategy for the quantitative detection of the prostate specific antigen (PSA). CdSe nanoparticles (NPs) sensitized lanthanum-doped titanium dioxide (La-TiO2) composites were used to bind the primary antibodies (Ab1). The doping of lanthanum promoted the visible light absorption of TiO2 and remarkably enhanced the photocurrent. Moreover, 0.3%La-TiO2 displayed the highest photocurrent in the La-TiO2 composites, which was twice as much as that of undoped TiO2. Carboxyl modified CdSe NPs were assembled onto La-TiO2 composites via the dentate binding between -COOH and Ti atom in TiO2 NPs, which dramatically promoted the photocurrent intensity by approximately 2.1 times. Carboxyl functionalized polystyrene (PS) microspheres were coated with the secondary antibodies (Ab2). Owing to the better insulation property and steric hindrance of the prepared polystyrene@Ab2 (PS@Ab2) composites, the significant reduction of the photocurrent signal was achieved after the specific immune recognition. Under the optimum experimental conditions, the fabricated PEC sensor realized ultrasensitive detection of PSA in the range of 0.05-100pgmL(-1) with a detection limit of 17fgmL(-1). Moreover, this well-designed PEC immunoassay exhibited ideal reproducibility, stability, and selectivity, which is a promising platform for the detection of other important tumor targets.

  19. Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite - (View Full Text) D6416/D6416M-01(2007) Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite - (View Full Text) D6416/D6416M-01(2007) Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

  20. The nature of fibrous dysplasia

    Directory of Open Access Journals (Sweden)

    Lemmer Johan

    2009-11-01

    Full Text Available Abstract Fibrous dysplasia has been regarded as a developmental skeletal disorder characterized by replacement of normal bone with benign cellular fibrous connective tissue. It has now become evident that fibrous dysplasia is a genetic disease caused by somatic activating mutation of the Gsα subunit of G protein-coupled receptor resulting in upregulation of cAMP. This leads to defects in differentiation of osteoblasts with subsequent production of abnormal bone in an abundant fibrous stroma. In addition there is an increased production of IL-6 by mutated stromal fibrous dysplastic cells that induce osteoclastic bone resorption.

  1. Sandwich-like heat-resistance composite separators with tunable pore structure for high power high safety lithium ion batteries

    Science.gov (United States)

    Shi, Junli; Shen, Tao; Hu, Huasheng; Xia, Yonggao; Liu, Zhaoping

    2014-12-01

    We demonstrate a new kind of composite separators. A unique feature of the separators is the three-tier structure, i.e. the crosslinked polyethylene glycol (PEG) skin layer being formed on both sides of the nonwoven separators by in-situ polymerization and the large pores in the interior of the nonwoven separators being remained. The surface pore structure and the thickness of the skin layer could be adjusted by controlling the concentration of the coating solution. The skin layer is proved to be able to provide internal short circuit protection, to contribute a more stable interfacial resistance and to alleviate liquid electrolyte leakage effectively, yielding an excellent cyclability. The remained large pores in the interior of the composite separators could provide an access for the fast transportation of lithium ions, giving rise to a very high ion conductivity. The polyimide (PI) nonwoven is employed to ensure enhanced thermal stability of the composite separators. More notably, the composite separators fabricated from the coating solution with a composition ratio of 20 wt% provide superior cell performances owing to the well-tailored microporous structure, comparing with the commercialized polypropylene (PP) separator, which show great promise for the application in the high power lithium ion batteries.

  2. POROSITY CALCULATION OF MIXTURES OF FIBROUS PARTICLES

    Institute of Scientific and Technical Information of China (English)

    Ruping Zou; Aibing Yu

    2003-01-01

    The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.

  3. Study on Composite Performances of Natural Fibrous Brucite Flame Retardant%天然纤维水镁石阻燃剂的复合性能研究

    Institute of Scientific and Technical Information of China (English)

    董发勤; 张宝述; 王维清; 王光华; 郑凯

    2009-01-01

    以硅烷偶联剂、钛酸酯偶联剂和磷酸酯偶联剂对天然纤维水镁石(FB)阻燃剂进行表面改性.将未改性与改性的FB分别填充聚丙烯(PP),研究了未改性与改性的FB及填充量对PP的力学性能和阻燃性能的影响,结果表明:未改性与改性的FB填充量在37.4%以下时,磷酸酯偶联剂改性FB填充PP的熔体流动速率和钛酸酯偶联剂改性FB填充PP的断裂伸长率下降最小;未改性与改性的FB填充量在28.5%时,硅烷偶联剂改性FB填充PP的抗拉强度增强最多;FB的填充量为41.2%时,有明显的阻燃效果,PP的氧指数[O_Ⅰ]为28.5%,当改性FB以此填充量加入PP时,酸酯偶联剂改性FB填充PP的力学性能较好,PP的拉伸强度和缺口冲击强度分别在21.10~22.51MPa和4.25~4.98MPa之间.最后,对纤维水镁石的阻燃机理进行了研究.%The silane coupling agent, titanate coupling agent and organic phosphate coupling agent as surface modifiers were used to modify the natural fibrous brucite(FB) flame-retardant. The unmodified FB and modified FB were introduced into polypropylene to form composite plastic. The influences of unmodified FB and modified FB and flame-retardant content on the mechanical and flame-retardant properties of PP were studied. The results showed the melt flow rate of PP filled with FB modified by silane coupling agent and the elongation at break of PP filled with titanate coupling agent had the minimum decline when the unmodified FB and modified FB contents were below 37.4%, the tensile strength of PP filled with FB modified by organic phosphate coupling agent had the maximum increase when the unmodified FB and modified FB contents were 28.5%. When the filling amount of FB was 41.2%, the oxygen index [O_Ⅰ]of PP with a clear flame-retardant effect was 28.5%; When the filling amount of the modified FB was 41.2%, the tensile strength and the notched impact strength of PP filled with FB modified by organic phosphate coupling agent

  4. 复合材料点阵夹芯结构的换热特性%Heat transfer characteristics of composite sandwich structure with lattice cores

    Institute of Scientific and Technical Information of China (English)

    孙雨果; 高亮

    2011-01-01

    采用FLUENT软件模拟了受一恒定温度载荷的复合材料点阵夹芯结构在辅助流体强制对流作用下的热行为和热传输特性。对流体的压力场、速度场、温度场等场分布规律及特征进行了分析,详细地阐述了点阵夹芯结构本身的构型对胞元内近壁流动和热传输类型的影响。采用雷诺数Re、努塞尔数Nu、压降损失系数KCell三个以胞元特征长度为度量的无量纲参数对结构的换热性能进行了表征与评价;并引入温度最小渗透率、最大渗透率和水平渗透率的概念,更加直观地表征结构的换热性能。结果表明,强制对流下结构的换热性能明显提高,有利于其轻质多功能化的%Thermal behavior and heat transfer characteristics of a composite sandwich structures with lattice cores under loading with a constant temperature field were simulated by computational fluid dynamics FLUENT software during forced convection with auxiliary fluid.The distribution and characteristics of flow field,such as the fields of pressure,velocity and temperature,were analyzed.The influence of structural morphology on the inner end-wall and heat transfer patterns in a unit cell was described in details.Three dimensionless parameters Reynolds number,Nusselt number and pressure drop coefficient,scaling by the characteristic length of unit cell were used to characterize and assess the heat transfer performance of structure.Furthermore,by introducing concepts of the minimum permeability,maximum permeability and horizontal permeability of temperature,the heat transfer performance of structure was visually characterized.The analytic results indicate that heat transfer performance of this lattice-cores sandwich structure can be evidently improved in the case of forced convection,and therefore reveal the structure is more suitable for the mulitifunctionalities of lightweight structure achievement in the future.

  5. [Craniofacial fibrous dysplasia].

    Science.gov (United States)

    Couturier, A; Aumaître, O; Mom, T; Gilain, L; André, M

    2016-12-01

    Fibrous dysplasia of bone is a benign, uncommon, sporadic, congenital skeletal disorder resulting in deformity. This disease arises from activating somatic mutation in GNAS which encodes the α subunit of the G stimulatory protein associated with proliferation of undifferentiated osteogenic cells resulting in marrow fibrosis, abnormal matrix production, and stimulation of osteoclastic resorption upon overproduction of IL-6 observed in dysplastic cells. Fibrous dysplasia may be monostotic or polyostotic. This mutation affecting many tissues, café au lait skin macules and endocrinopathies (precocious puberty, hyperthyroidism, growth hormone excess, Cushing syndrome) may be associated in McCune-Albright syndrome, but also myxoma in Mazabraud syndrome or phosphate diabetes. Diagnosis of craniofacial fibrous dysplasia should be considered in the presence of headache, neuralgia, sensory disorders (vision, hearing, balance, smelling), functional disorders (nasal obstruction, nasolacrimal duct obstruction, non-matching occlusion), infectious complications (sinusitis, otitis, mastoiditis). Such symptoms should lead to perform craniofacial CT scan completed with MRI. Bone biopsy is not systematic. Surgical treatment is discussed in cases of nervous complication, facial deformity or active lesions. In case of pain resistant to conventional analgesics, intravenous bisphosphonates can be proposed. In non-responder patients, several case reports suggest the efficacy of a monoclonal antibody directed against the IL-6 receptor which requires to be confirmed by randomized studies.

  6. 预制混凝土夹芯复合墙板的应用与住宅产业化%The Application of Concrete Sandwich Composite Panel and Housing Industrialization

    Institute of Scientific and Technical Information of China (English)

    肖力光; 范雪

    2015-01-01

    论述了住宅产业化及其在我国的发展,分析了预制混凝土夹芯复合墙板的特点和国内外研究现状,指出发展预制混凝土夹芯复合墙板是实现住宅产业化的重要支撑,发展预制混凝土夹芯复合墙板可以有效实现建筑节能,应进一步推广这种新型节能保温墙体材料的应用。%This article expounds the development of the housing industrialization in China, analyses the characteris-tics and the current situation of the concrete sandwich composite panel, points out that the development of the con-crete sandwich composite panel is the important support to realize the housing industrialization, and puts forward the development of the concrete sandwich composite panel can achieve the energy conservation in building effectively, so as to extend the application of this new type of energy-saving insulation panel.

  7. Properties of Co-Curing Composite Panel/Aluminium Honeycomb Sandwich Structure%共固化复合材料/铝蜂窝夹层结构性能

    Institute of Scientific and Technical Information of China (English)

    潘玲英; 孙宏杰; 尹亮; 林娜; 杨智勇

    2012-01-01

    采用共固化工艺制备了碳纤维增强复合材料面板/铝蜂窝夹层结构.通过考察固化压力对复合材料面板性能的影响确定了共固化的成型压力,对比分析了不同规格铝蜂窝及其夹层结构的力学性能.结果表明,对于薄面板,成型压力对面板力学性能的影响较小,规格为0.04 mm×4 mm 的铝蜂窝制备的夹层结构具有更高的比强度和比刚度,且成型工艺性好.%Composite panel/aluminium sandwich structure was fabricated by the co-curing process. The effect of processing pressure on the properties of composite panel was investigated to determine the co-curing pressure. The properties of aluminium honeycomb with different dimension parameter and their sandwich structures were also tested and analyzed. The results show that the processing pressure has little effect on the properties of thin composite panel. The sandwich structure fabricated by the aluminium honeycomb of 0. 04 mm×4 mm has high specific strength and modulus, and is easier to fabricate. Therefore, it has more widely potential applications.

  8. The sandwich sign

    Directory of Open Access Journals (Sweden)

    Nasreen Mahomed

    2012-09-01

    Full Text Available The sandwich sign refers to the sandwiching of mesenteric vessels and fat by enlarged mesenteric nodes on cross-sectional imaging, commonly occurring in lymphoma, but not specific to lymphoma. The sign is radiologically indistinguishable from post-transplant lymphoproliferative disorders. The radiological significance of the sandwich sign is in suggesting the diagnosis of lymphoma so that appropriate treatment may be initiated early as the tumour has a rapid growth pattern.

  9. 纤维增强复合材料三明治板的破片穿甲实验%Armor-piercing experiment on fragment against sandwich plate with fiber reinforced composite cores

    Institute of Scientific and Technical Information of China (English)

    徐豫新; 王树山; 严文康; 虢忠仁

    2012-01-01

    研究了钢板一纤维增强复合材料板一钢板构成的三明治结构对破片的防护性能。通过破片模拟弹丸(FSP)高速撞击不同结构三明治板实验,获得FSP弹丸贯穿16种三明治板的弹道极限,分析结构特征对纤维增强复合材料三明治板比吸收能的影响。结果表明,叠层芳纶、玻纤基三明治板较单层结构三明治板比吸收能分别提高了8.31%和16.09%,8mm面板+8mm夹层+6mm背板芳纶、玻纤基三明治板较4mm面板+8mm夹层+10mm背板的芳纶、玻纤基三明治板比吸收能分别提高了37.72%和25.35%;芳纶、玻纤基三明治板的比吸收能均随复合材料夹层厚度的增加呈指数递增,夹层基板的抗拉性能是影响三明治板比吸收能的重要因素;同面密度下,厚面板、薄背板及多层叠合夹层结构的三明治板具有更高的比吸收能。%The defense performance of sandwich structure of steel plate - fiber composite material plate - steel plate structure against fragment was investigated. By the experiment on the fragment simulation projectile (FSP), impacted to different kinds of sandwich plate with high velocity, the ballistic limits of fragment pierced 16 kinds of sandwich plates were obtained, and the influence of structure characteristic on the speeifie energy absorption of the sandwich plate was analyzed. The results show that the specific energy absorption of laminated sandwich structure on aramid and glass fiber is 8. 31% and 16.09% higher than that of a single-layer structure, respectively. The specific energy absorption of the sandwich structure with 8 mm front+ 8mm core+ 6 mm back on aramid and glass fiber is 37.72% and 25. 35% higher than the one with 4 mm frontq-8 mm core+10 mm back, respectively. The speeific energy absorption of sandwich plate exponentially increases with the thickness of fiber composite sandwich. The tensile properties of middle layer plate is an

  10. The Effects of Foam Thermal Protection System on the Damage Tolerance Characteristics of Composite Sandwich Structures for Launch Vehicles

    Science.gov (United States)

    Nettles, A. T.; Hodge, A. J.; Jackson, J. R.

    2011-01-01

    For any structure composed of laminated composite materials, impact damage is one of the greatest risks and therefore most widely tested responses. Typically, impact damage testing and analysis assumes that a solid object comes into contact with the bare surface of the laminate (the outer ply). However, most launch vehicle structures will have a thermal protection system (TPS) covering the structure for the majority of its life. Thus, the impact response of the material with the TPS covering is the impact scenario of interest. In this study, laminates representative of the composite interstage structure for the Ares I launch vehicle were impact tested with and without the planned TPS covering, which consists of polyurethane foam. Response variables examined include maximum load of impact, damage size as detected by nondestructive evaluation techniques, and damage morphology and compression after impact strength. Results show that there is little difference between TPS covered and bare specimens, except the residual strength data is higher for TPS covered specimens.

  11. FRP夹强化泡沫芯复合材料的力学性能%Mechanical Properties of Sandwich Composites Made of FRP Panels and Strengthened Foam Cores

    Institute of Scientific and Technical Information of China (English)

    吴琴; 黄争鸣

    2012-01-01

    In this article, mechanical properties of a new type of foam-core sandwich composites are studied. The core was made by inserting thin-walled circular tubes into a PU foam, resulting in a significant reinforcement in its Z-directional properties. The sandwich composites were further fabricated by using FRP (fiber reinforced plastic) panels as surfaces and the strengthened foam as core. Lateral compression, three- point bending and shear tests were carried out for the sandwich composites. Failure mechanisms were analyzed based on fracture modes observed. Theoretical predictions for compression and bending moduli were carried out. The results show that the sandwich materials developed can significantly improve Z-directional mechanical properties, and have a good application prospect.%本文研究一种新型强化泡沫芯夹层复合材料的力学性能。选择在低成本的PU泡沫中置入圆管状结构增强体,使泡沫芯的等效Z向性能大幅提高。对以FRP面板夹这种强化泡沫芯制成的三明治复合材料结构,进行了平压试验、三点弯曲试验和剪切试验,基于其结构破坏模式,分析其破坏机理,并应用三维层板理论和细观力学方法进行了理论模拟。结果表明,这种强化泡沫芯能显著提高三明治板材的Z向力学性能,具有良好的应用前景。

  12. (Metal-Organic Framework)-Polyaniline sandwich structure composites as novel hybrid electrode materials for high-performance supercapacitor

    Science.gov (United States)

    Guo, ShuaiNan; Zhu, Yong; Yan, YunYun; Min, YuLin; Fan, JinChen; Xu, QunJie; Yun, Hong

    2016-06-01

    Carbonized Zn-(Metal-Organic Framework)MOF- polyaniline composites for high performance of supercapacitor have been developed from zinc acetate, 8-Hydroxyquinoline, and aniline via a simple process. The as-synthesized product has been characterized by X-ray powder diffraction (XRD), Scanning electron microscopy(SEM), Fourier transform infrared spectra (FT-IR), Transmission electron microscope (TEM). The electrochemical properties of carbonized Zn-MOF/polyaniline electrode were investigated by current charge-discharge and cyclic voltammetry. The specific capacitance of MOF/PANI has been approach to be as high as 477 F g-1 at a current density of 1 A g-1.

  13. New "sandwich" structures conformed from three dimensional

    Directory of Open Access Journals (Sweden)

    Alba, Juan J.

    1996-03-01

    Full Text Available Poor interlaminar properties as well as poor-skin-to-core adhesion properties are very often the common existing problems we find when designing with "sandwich" structures. A new type of 3D-fabric "sandwich" structure is being developed in order to avoid these problems. Although the manufacturing process is very simple, a very complex "sandwich" structure is obtained as a result of the complexity of the 3D-fabric used. This 3D-fabric is a 3D woven glass fabric produced on velvet weaving machines with glass yarns. It is an integrally woven "sandwich" laminate for all kinds of composite products. The strength of the vertical fibers makes, that also after impregnation with a resin matrix, the "sandwich" structure is maintained. The result is a laminate with high strength and stiffness and low weight. On each side of this "sandwich" laminate additional reinforcement materials can be laminated and a synthetic foam can be injected in the hollow structure. This will allow to establish the mechanical properties of a finished product.

    Las pobres propiedades, tanto interlaminares como de adhesión entre piel y núcleo, constituyen uno de los grandes problemas cuando se diseñan estructuras utilizando paneles tipo "sandwich". Un nuevo tipo de panel "sandwich", configurado a partir de tejidos tridimensionales, está siendo desarrollado en la actualidad con el objetivo de eliminar esos problemas. Aunque el proceso de fabricación es muy simple, el panel "sandwich" obtenido es de estructura compleja, como resultado de la complejidad del tejido tridimensional utilizado. Este tejido tridimensional (3D es un tejido de fibra de vidrio producido en máquinas de tejer especializadas. La resistencia de las fibras verticales hace que, después de la impregnación con una resina, se mantenga la configuración tipo "sandwich". El resultado es un laminado de alta resistencia, gran rigidez y bajo peso. Sobre cada uno de los lados del panel "sandwich" se pueden

  14. Control and optimization of Clostridium tyrobutyricum ATCC 25755 adhesion into fibrous matrix in a fibrous bed bioreactor.

    Science.gov (United States)

    Jiang, Ling; Wang, Jufang; Liang, Shizhong; Cai, Jin; Xu, Zhinan

    2011-09-01

    The great performance of a fibrous bed bioreactor (FBB) is mainly dependent on the cell adhesion and immobilization into the fibrous matrix. Therefore, understanding the mechanism and factors controling cell adhesion in the fibrous matrix is necessary to optimize the FBB setup and further improve the fermentability. The adhesion behavior of a strain of Clostridium tyrobutyricum isolated from an FBB was studied, which was proven to be affected by the different environmental conditions, such as growth phase of cells, pH, ionic strength, ionic species, and composition of media. Our results also suggested that electrostatic interactions played an important role on bacteria adhesion into the fibrous matrix. This study demonstrated that the compositions of fermentation broth would have a significant effect on cell adhesion. Consequently, a two-stage glucose supply control strategy was developed to improve the performance of FBB with higher viable cell density in the operation of the FBB setup.

  15. 钢丝桁架复合墙板抗弯及振动特性试验研究%Experimental investigations on the fiexural behavior and dynamic response of the composite sandwich panels with truss shear connectors

    Institute of Scientific and Technical Information of China (English)

    侯和涛; 马克峰; 李国强; 陈璐

    2011-01-01

    Energy-saving composite sandwich panels were composed of two wythes of concrete and a core layer of thermal insulation, which were connected to each other by truss shear connectors. Because of their advantages, such as the superior flexural resistance and stiffness, light weight and excellent thermal insulation, sandwich composite panels were widely employed in steel residential houses. In order to investigate how the arrangements of truss shear connectors affect the flexural behavior and dynamic response of the panels, two full-scale sandwich composite panels were built and tested. One specimen was a composite panel with the plane truss shear connectors, and the other was a CL ( composite light-weight) panel with the spatial truss shear connectors. Test results showed that the panels with the plane truss shear connectors had a higher ultimate flexural strength and higher-order mode damping ratios than the CL panel, but with a similar crack loads. The influence of the truss shear connector on the flexural strength and mode damping ratios of sandwich composite panel could be significant.%节能复合墙板是由两块钢筋混凝土面板和聚苯板芯层通过斜向钢丝可靠连接而成的复合板,具有抗弯刚度大、承载力高、自重轻和节能保温等特点,广泛应用于钢结构住宅.为研究斜向钢丝的布置对复合墙板抗弯承载力和振动模态的影响,本文分别对足尺平面钢丝桁架复合墙板和CL(composite light-weight)空间网架墙板进行了抗弯承载力和振动特性的试验研究,结果得出平面钢丝桁架复合墙板的极限抗弯承载力和一阶以上的阻尼比均高于CL墙板,而开裂荷载基本相同,表明斜向钢丝布置对复合墙板的抗弯承载力和阻尼比影响较大.

  16. Myoblast differentiation of human mesenchymal stem cells on graphene oxide and electrospun graphene oxide-polymer composite fibrous meshes: importance of graphene oxide conductivity and dielectric constant on their biocompatibility.

    Science.gov (United States)

    Chaudhuri, Biswadeep; Bhadra, Debabrata; Moroni, Lorenzo; Pramanik, Krishna

    2015-02-18

    Recently graphene and graphene based composites are emerging as better materials to fabricate scaffolds. Addition of graphene oxide (GO) nanoplatelets (GOnPs) in bioactive polymers was found to enhance its conductivity (σ) and, dielectric permittivity (ϵ) along with biocompatibility. In this paper, human cord blood derived mesenchymal stem cells (CB-hMSCs) were differentiated to skeletal muscle cells (hSkMCs) on spin coated thin GO sheets composed of GOnPs and on electrospun fibrous meshes of GO-PCL (poly-caprolactone) composite. Both substrates exhibited excellent myoblast differentiations and promoted self-alignedmyotubesformation similar to natural orientation. σ, ϵ, microstructural and vibration spectroscopic studies were carried out for the characterizations of GO sheet and the composite scaffolds. Significantly enhanced values of both σ and ϵ of the GO-PCL composite were considered to provide favourable cues for the formation of superior multinucleated myotubes on the electrospun meshes compared to those on thin GO sheets. The present results demonstrated that both substrates might be used as potential candidates for CB-hMSCs differentiation and proliferation for human skeletal muscle tissue regeneration.

  17. Solitary fibrous tumor

    Directory of Open Access Journals (Sweden)

    Manlio Mencoboni

    2010-12-01

    Full Text Available Solitary fibrous tumor (SFT is a rare mesenchymal neoplasm which may be found everywhere in the body. It is now distinguished into two forms, pleural and extrapleural, which morphologically resemble each other. Abdomi­nal localizations are quite rare, with 10 cases only reported in bladder; rarely they can be source of paraneoplastic syndromes (i.e., hypoglycemia secondary to insulin-like growth factor. In April 2006 a 74-year-old white male presented with chills, diaphoresis and acute abdominal pain with hematuria. At admission in emergency he underwent an abdominal X-ray (no pathological findings and an ultrasound examination of the kidneys and urinary tract, which revealed a pelvic hyperechogenic neoformation measuring approximately 10¥8¥7 cm, compressing the bladder. Blood chemistry at admission revealed only a mild neutrophilic leucocytosis (WBC 16600, N 80%, L 11%, elevated fibrinogen and ESR, and hypoglycemia (38 mg/dL. Macro­scopic hematuria was evident, while urinocolture was negative. Contrast enhanced CT scan of the abdomen and pelvic region revealed a large round neoformation dislocating the bladder, with an evident contrast-enhanced periphery and a central necrotic area. Continuous infusion of glucose 5% solution was necessary in order to maintain blood glucose levels above 50 mg/dL. The patient underwent complete surgical resection of an ovoidal mass coated by adipose tissue, with well delimited margins; histological findings were consistent with solitary fibrous tumor (SFT. Hypoglycemia resolved completely with removal of the growth. In this case report we describe a SFT growing in the bladder, a quite rare localization, which presented a unique hypoglycemia. In contrast to the majority of cases reported in the literature, the behavior of this SFT was not aggressive, and, since the patient is still alive, surgical resection was considered conclusive.

  18. 高温烟气净化用陶瓷纤维管的制备与性能%Preparation and properties of fibrous ceramic composite tube for purifying high temperature dust gas

    Institute of Scientific and Technical Information of China (English)

    刘威; 崔元山; 金江

    2012-01-01

    由于陶瓷纤维材料具有耐腐蚀强、耐高温和机械强度好等优点常常用于高温环境的过滤。主要研究了应用耐高温陶瓷纤维材料制备烟气净化用陶瓷纤维管及其性能分析。利用氧化铝陶瓷纤维及硅灰石纤维长度、直径不同等特征,使用两步成形的方法制成具有复合结构的纤维多孔陶瓷样品。并对影响材料性能的各种因素进行分析和探讨。采用扫描电子显微镜(SEM)和金相显微镜对陶瓷纤维管的显微结构进行了分析和测量。结果表明,如果选择在1 000℃烧成的样品抗折强度为9.7 MPa,4 m/min流速时的阻力为228 Pa,显气孔率达到78%。%Due to the high erosion resistance and mechanical strength at elevated temperature,the fibrous ceramic materials have a great potential for application in high temperature.This article primarily described the preparation and properties of the fibrous ceramic tube.Utilizing the different diameters and lengths of the ceramic fibre,the fibrous ceramic tube was fabricated by two steps with composite structure.Factors affecting the properties of the materials were analyzed and discussed.The microstructure features were analyzed,measured by using scanning electron microscope(SEM),metallographic microscope.The result showed that the rupture strength and the porosity was best in 1 000℃.The rupture strength was 9.7 MPa and the porosity was 78%.The permeation resistance of the sample was 228 Pa at the air rate of 4 m/min.

  19. Sandwich classification theorem

    Directory of Open Access Journals (Sweden)

    Alexey Stepanov

    2015-09-01

    Full Text Available The present note arises from the author's talk at the conference ``Ischia Group Theory 2014''. For subgroups FleN of a group G denote by Lat(F,N the set of all subgroups of N , containing F . Let D be a subgroup of G . In this note we study the lattice LL=Lat(D,G and the lattice LL ′ of subgroups of G , normalized by D . We say that LL satisfies sandwich classification theorem if LL splits into a disjoint union of sandwiches Lat(F,N G (F over all subgroups F such that the normal closure of D in F coincides with F . Here N G (F denotes the normalizer of F in G . A similar notion of sandwich classification is introduced for the lattice LL ′ . If D is perfect, i.,e. coincides with its commutator subgroup, then it turns out that sandwich classification theorem for LL and LL ′ are equivalent. We also show how to find basic subroup F of sandwiches for LL ′ and review sandwich classification theorems in algebraic groups over rings.

  20. Development, testing, and numerical modeling of a foam sandwich biocomposite

    Science.gov (United States)

    Chachra, Ricky

    This study develops a novel sandwich composite material using plant based materials for potential use in nonstructural building applications. The face sheets comprise woven hemp fabric and a sap based epoxy, while the core comprises castor oil based foam with waste rice hulls as reinforcement. Mechanical properties of the individual materials are tested in uniaxial compression and tension for the foam and hemp, respectively. The sandwich composite is tested in 3 point bending. Flexural results are compared to a finite element model developed in the commercial software Abaqus, and the validated model is then used to investigate alternate sandwich geometries. Sandwich model responses are compared to existing standards for nonstructural building panels, showing that the novel material is roughly half the strength of equally thick drywall. When space limitations are not an issue, a double thickness sandwich biocomposite is found to be a structurally acceptable replacement for standard gypsum drywall.

  1. Underwater acoustical properties of a sound absorption structure with light sandwich composite%轻质夹层复合吸声结构的水声性能实验研究

    Institute of Scientific and Technical Information of China (English)

    李浩; 梅志远; 朱锡

    2011-01-01

    夹层复合吸声结构具有很强的可设计性,得到广泛的应用,但以往研究的此夹层结构的吸声芯材存在密度较大的问题.为解决此问题,采用玻璃钢作为表层材料,多种空心玻璃微珠混合填充环氧树脂和聚氨酯改性环氧树脂合成的高分子吸声材料作为芯材,设计一种轻质夹层复合吸声结构.首先研究确定了表层材料的厚度,并制作了脉冲声管测试试件,根据测试结果确定芯材的合成配方,根据此配方制作了消声水池测试试件,在消声水池中测试了其吸声系数和反射系数,最后对该结构的吸声机理进行了分析,结果证明:用空心玻璃微珠填充环氧树脂和聚氨酯改性环氧树脂可以合成低密度高分子吸声材料(相对密度0.8±0.05),用其作为芯材制作的夹层复合吸声结构具有良好的吸声性能,降低夹层结构的整体重量的同时也具有很好的声隐身效果,更有利于工程的应用.%Sound absorption structure with sandwich composite has been extensively used because it is designable.Here, in order to solving the problem that the density of sound absorption core material of previous sandwich composite structures was larger, a kind of sound absorption structure with light sandwich composite was designed.Its surface material was GFRP, and its core material was polymer sound absorption material synthesized with a variety of hollow glass microsphere, epoxy resin and polyurethane- modified epoxy resin.The thickness of the surface GERP material was studied and determined.The underwater acoustical properties of a specimen were measured in form of a sound pulse tube.The synthetic formula of the core material was determined based on the test results of the pulse tube specimen.The sample was prepareD for anechoic tank test.The sound reflection coefficient and sound absorption coefficient of this sample were measured in the anechoic tank.Then, the sound absorption mechanism of the sound

  2. Hypotrichosis with keratosis pilaris: electrophoretical study of hair fibrous proteins from a patient.

    Science.gov (United States)

    Dekio, S; Nagashima, T; Watanabe, Y; Jidoi, J

    1989-01-01

    S-carboxymethylated (SCM) fibrous proteins from the scalp hair of a patient with hypotrichosis with keratosis pilaris (HTKP) and from that of a normal individual were analyzed using two-dimensional electrophoresis. One SCM fibrous protein component was different electrophoretically in the HTKP patient. It is suggested that the brittleness of the HTKP hair might result from this alteration of the fibrous protein composition of the hair.

  3. Nonlinear dynamic analysis of sandwich panels

    Science.gov (United States)

    Lush, A. M.

    1984-01-01

    Two analytical techniques applicable to large deflection dynamic response calculations for pressure loaded composite sandwich panels are demonstrated. One technique utilizes finite element modeling with a single equivalent layer representing the face sheets and core. The other technique utilizes the modal analysis computer code DEPROP which was recently modified to include transverse shear deformation in a core layer. The example problem consists of a simply supported rectangular sandwich panel. Included are comparisons of linear and nonlinear static response calculations, in addition to dynamic response calculations.

  4. 复合材料泡沫夹层结构的缺陷评定方法研究%Research on the Evaluation Method of Defects for Composite Foam Sandwiches

    Institute of Scientific and Technical Information of China (English)

    唐桂云; 王云飞; 于柏峰

    2011-01-01

    本文以厚壁碳纤维复合材料为面板,硬质聚氨酯泡沫为芯材制造复合材料泡沫夹层结构,模拟实际生产过程中容易出现的面板与芯材之间界面的脱粘和界面胶层过厚的现象,采用人工制造试块的方法,研究了超声波探伤对夹层复合材料缺陷的评定方法,解决了实际检测过程中的疑问,为夹层复合材料结构产品的质量检验提供依据。得出了粘接良好区胶层过厚不会被判定为脱粘的结论。%The potential debond and the thicker interfacial bonding layer between the panel and the core during the practical processing were simulated for the foam sandwich structures with thick carbon fiber panels and rigid polyurethane foam core. Using the man - made defect method, the evaluating method of sandwich composite defects was researched with ultrasonic testing, which solved the problems in the practical testing process and provided the evidence for the quality tes- ting of sandwich composite structures. The conclusions were got that the thicker bonding layers in the better adhesive area will not be considered as the debondinz.

  5. 湿热载荷下含损伤夹层板分层扩展判定分析%Delamination Growth of Composite Sandwich under Hygrothermal and Mechanical Loads

    Institute of Scientific and Technical Information of China (English)

    张志民; 李向阳

    2001-01-01

    The local buckling may occur in composite sandwich with delamination induced by impact damage. This often causes delamination growth and structure failure. The delamiantion growth is studied by using the variational method of moving boundary, and the formulas of energy release rate G along the delamination front are obtained. By employing Rayleigh-Ritz method, the hygrothermal effect on buckling character of composite sandwich plates containing delamination between two faceplate laminae is studied.%含面板内分层损伤的复合材料夹层板在承受压缩载荷时,很容易发生局部屈曲,导致分层扩展和结构失效,恶劣的湿热环境更是使之加剧.利用可动边界变分问题对分层扩展进行了分析,导出了分层边界的逐点能量释放率表达式,采用Rayleigh-Ritz法研究了任意的湿热环境对含损伤的复合材料夹层板分层扩展性能的影响.

  6. Predicting safe sandwich production

    DEFF Research Database (Denmark)

    Birk, Tina; Duan, Zhi; Møller, Cleide Oliveira de Almeida

    2014-01-01

    and serving. However, Danish sandwich producing companies find it challenging to comply with this and have expressed a need for more flexibility. The Danish guidelines do allow for a prolongation of the acceptable time outside the cold chain, if the safety of the specific production can be documented....... There is, therefore, room for developing targeted tools for evaluating the time-temperature scenarios in sandwich production. This study describes a decision support tool developed to offer the producers more flexibility. Based on time/temperature measurements obtained during preparation combined......Time and temperature control is crucial to avoid growth of pathogens during production and serving of cold ready-to-eat meals. The Danish guidelines state that chilled foods, such as sandwiches, should not be outside the cold chain for more than 3 hours including the time for preparation...

  7. 深水环境下粘弹性复合材料夹层结构蠕变特性研究%Creep characteristics analysis of viscoelastic composite sandwich strcuture under static pressure of deep water environment

    Institute of Scientific and Technical Information of China (English)

    杨坤; 吴梵; 邱家波

    2016-01-01

    Combined with the uniaxial compression creep test and viscoelastic material modeling theory of generalized Maxwell, the coefficients of relaxation modulus Prony series of absorption and floating viscoelas-tic filler material were obtianed. The creep charateristic experiment of viscoelastic composite sandwich structure under water was carried out, and the results were compared with the simulation research. The re-sults show that at the long-term creep stage of composite materials sandwich structure, the core material has a dominant presence compare with composite material; with the increase of time, the creep and relax-ation phenomena exhibited by viscoelastic properties of the surface composite matrix appear alternately, the surface strain fluctuates;on long-term creep deformation of composite sandwich structure, the core ma-terial contributes about 60%.%文章结合单轴压缩蠕变试验和粘弹性材料广义Maxwell建模理论得到吸声和浮体两种粘弹性填充材料的松弛模量Prony级数系数,开展了深水环境下粘弹性复合材料夹层结构蠕变特性试验,并将之与仿真研究结果进行对比,得到如下结论:复合材料夹层结构长时蠕变初期,芯材蠕变较表层复合材料占主导地位;随着时间增加,表层复合材料基体的粘弹性特性所表现出的蠕变和松弛现象交织出现,表层应变出现波动;芯材蠕变对复合材料夹层结构长时蠕变变形的贡献约为60%。

  8. On Sandwiched Singularities

    OpenAIRE

    Möhring, Konrad

    2004-01-01

    Sandwich-Singularitäten sind die Singularitäten auf derNormalisierung von Aufblasungen eines regulärenFlächenkeimes. In der Arbeit wird ein enger Zusammenhangzwischen Topologie und Deformationstheorie vonSandwich-Singularitäten einerseits und ebenenKurvensingularitäten andererseits dargestellt. NeueErgebnisse betreffen u.a. Deformationen vonnulldimensionalen komplexen Räumen in der Ebene, die durchvollständige Ideale beschrieben werden, z.B. wann'simultanes Aufblasen' der Fasern einer solchen...

  9. Study on the effects of white rice husk ash and fibrous materials additions on some properties of fiber-cement composites.

    Science.gov (United States)

    Hamzeh, Yahya; Ziabari, Kamran Pourhooshyar; Torkaman, Javad; Ashori, Alireza; Jafari, Mohammad

    2013-03-15

    This work assesses the effects of white rice husk ash (WRHA) as pozzolanic material, virgin kraft pulp (VKP), old corrugated container (OCC) and fibers derived from fiberboard (FFB) as reinforcing agents on some properties of blended cement composites. In the sample preparation, composites were manufactured using fiber-to-cement ratio of 25:75 by weight and 5% CaCl(2) as accelerator. Type II Portland cement was replaced by WRHA at 0%, 25% and 50% by weight of binder. A water-to-binder ratio of 0.55 was used for all blended cement paste mixes. For parametric study, compressive strength, water absorption and density of the composite samples were evaluated. Results showed that WRHA can be applied as a pozzolanic material to cement and also improved resistance to water absorption. However, increasing the replacement level of WRHA tends to reduce the compressive strength due to the low binding ability. The optimum replacement level of WRHA in mortar was 25% by weight of binder; this replacement percentage resulted in better compressive strengths and water absorption. OCC fiber is shown to be superior to VKF and FFB fibers in increasing the compressive strength, due to its superior strength properties. As expected, the increase of the WRHA content induced the reduction of bulk density of the cement composites. Statistical analysis showed that the interaction of above-mentioned variable parameters was significant on the mechanical and physical properties at 1% confidence level.

  10. Origin of Sandwich

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    In every language there are words that have some interesting stories behind them. The word “sandwich” forexample, is very common in English. If we want to know the story behind it, we must know something about an English nobleman named Sandwich who lived in the 18th century.

  11. Making a Sandwich

    Institute of Scientific and Technical Information of China (English)

    郭富强

    2011-01-01

    Do you like eating sandwiches? Here is a recipe(做法) for a fruit sandwich.First , you should put butter(黄油)on two slices(片) of bread. Next, peel(剥开) three bananas. Now cut up(切碎) these three bananas and apple.

  12. 纤维增强复合材料三明治板破片穿甲数值仿真%Numerical simulation on fragment armor-piercing against sandwich plate with fiber reinforced composite cores

    Institute of Scientific and Technical Information of China (English)

    徐豫新; 戴文喜; 王树山; 赵晓旭

    2014-01-01

    The energy transform in the process of fragment armor-piercing against a sandwich plate with fiber reinforced composite cores (made up of superimposed steel plate,composite material plate and steel plate laminated)was considered .The fragment simulation projectile (FSP)penetrating into different kinds of sandwich plates with high velocity were numerically simulated and the ballistic limits of fragment piercing 16 kinds of sandwich plates were obtained.The credibility of the numerical simulation method was verified by comparing its results with the experimental ones.Under critical fragment perforation,the correlation between the energy absorption ratio of the each part of the sandwich plate and the structural size was studied by analyzing the numerical simulation results.The results show that the energy absorption ratio is constant for different thickness core plate(for aramid fiber core,10.41%,for glass fiber core,2.68%),the internal energy in core plate is quadratically increased with the increase of its thickness.On this basis,the calculation method for ballistic limit velocity of fragment penetrating into sandwich plate with fiber reinforced composite cores was obtained.%研究破片对(由钢板、纤维增强复合材料板及钢板叠合而成)纤维增强复合材料三明治板穿甲过程中能量转化规律。进行破片模拟弹丸(FSP)对不同结构三明治板高速穿甲数值仿真,获得FSP弹丸对16种三明治板的弹道极限,并与实验结果对比验证数值仿真的可信度。通过分析数值仿真结果,进一步研究破片临界贯穿条件下纤维增强复合材料三明治板各组成部分吸能比率与结构尺寸相关性。结果表明,不同厚度夹层板的吸能比率恒定(芳纶纤维10.41%,玻璃纤维2.68%),夹层板内能随厚度的增加呈二次函数增加。由此获得破片对纤维增强复合材料三明治板弹道极限速度计算方法。

  13. The sandwich-type electrochemiluminescence immunosensor for {alpha}-fetoprotein based on enrichment by Fe{sub 3}O{sub 4}-Au magnetic nano probes and signal amplification by CdS-Au composite nanoparticles labeled anti-AFP

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Hankun [State Key Laboratory Base of Novel Functional Materials and Preparation Science, Faculty of Material Science and Chemical Engineering of Ningbo University, Ningbo 315211 (China); Gan Ning, E-mail: ganning@nbu.edu.cn [State Key Laboratory Base of Novel Functional Materials and Preparation Science, Faculty of Material Science and Chemical Engineering of Ningbo University, Ningbo 315211 (China); Li Tianhua; Cao Yuting; Zeng Saolin [State Key Laboratory Base of Novel Functional Materials and Preparation Science, Faculty of Material Science and Chemical Engineering of Ningbo University, Ningbo 315211 (China); Zheng Lei, E-mail: nfyyzl@163.com [Department of Laboratory Medicine, Nanfang Hospital, Southern Medical University, Guangzhou 510515 (China); Guo Zhiyong [State Key Laboratory Base of Novel Functional Materials and Preparation Science, Faculty of Material Science and Chemical Engineering of Ningbo University, Ningbo 315211 (China)

    2012-10-09

    Highlights: Black-Right-Pointing-Pointer Sandwich immunoreaction, testing a large number of samples simultaneously. Black-Right-Pointing-Pointer The magnetic separation and enrichment by Fe{sub 3}O{sub 4}-Au magnetic nano probes. Black-Right-Pointing-Pointer The amplification of detection signal by CdS-Au composite nanoparticles labeled anti-AFP. Black-Right-Pointing-Pointer Almost no background signal, which greatly improve the sensitivity of detection. - Abstract: A novel and sensitive sandwich-type electrochemiluminescence (ECL) immunosensor was fabricated on a glassy carbon electrode (GCE) for ultra trace levels of {alpha}-fetoprotein (AFP) based on sandwich immunoreaction strategy by enrichment using magnetic capture probes and quantum dots coated with Au shell (CdS-Au) as the signal tag. The capture probe was prepared by immobilizing the primary antibody of AFP (Ab1) on the core/shell Fe{sub 3}O{sub 4}-Au nanoparticles, which was first employed to capture AFP antigens to form Fe{sub 3}O{sub 4}-Au/Ab1/AFP complex from the serum after incubation. The product can be separated from the background solution through the magnetic separation. Then the CdS-Au labeled secondary antibody (Ab2) as signal tag (CdS-Au/Ab2) was conjugated successfully with Fe{sub 3}O{sub 4}-Au/Ab1/AFP complex to form a sandwich-type immunocomplex (Fe{sub 3}O{sub 4}-Au/Ab1/AFP/Ab2/CdS-Au), which can be further separated by an external magnetic field and produce ECL signals at a fixed voltage. The signal was proportional to a certain concentration range of AFP for quantification. Thus, an easy-to-use immunosensor with magnetic probes and a quantum dots signal tag was obtained. The immunosensor performed at a level of high sensitivity and a broad concentration range for AFP between 0.0005 and 5.0 ng mL{sup -1} with a detection limit of 0.2 pg mL{sup -1}. The use of magnetic probes was combined with pre-concentration and separation for trace levels of tumor markers in the serum. Due to the

  14. Effective properties of coated fibrous piezoelectric composites with spring-type interfaces under anti-plane mechanical and in-plane electrical loads

    Science.gov (United States)

    Shi, Yin; Wan, YongPing; Zhong, Zheng

    2016-10-01

    In this paper, we investigate the effective properties of three-phase (matrix/coating/fiber) cylindrical piezoelectric composites with imperfect interfaces under anti-plane mechanical and in-plane electrical loads. By using the electromechanically coupling spring-type interface model and the generalized self-consistent method (GSM), we analytically derived the effective electroelastic moduli. The present solutions include as special cases the three-phase cylindrical piezoelectric composites with perfect interfaces as well as the two-phase (matrix/fiber) case with imperfect or perfect interfaces. Selected calculations are graphically shown to demonstrate dependence of the effective moduli on the interfacial properties. The particular size-dependent characteristic due to the interfacial imperfection is also discussed.

  15. Experimental study on the sound insulation property of integrated hollow core sandwich composites%整体中空复合材料隔声性能的实验研究

    Institute of Scientific and Technical Information of China (English)

    李鸿顺; 钱坤; 曹海建; 俞科静; 李文敏

    2011-01-01

    为了探讨整体中空复合材料结构与隔声性能之间的关系,设计并制备了不同高度、不同面板厚度以及不同芯材的玻璃纤维整体中空织物/环氧树脂复合材料。采用混响室-消声室法对其隔声性能进行了测试分析。研究表明:整体中空复合材料的结构对其隔声性能有明显的影响。复合材料的隔声性能随着结构高度的增加逐渐提高,面板厚度对材料的隔声效果影响较大,芯材排列形式对其隔声性能影响相对较小;8形整体中空复合材料的隔声性能略高于88形和X形。%In order to study the relationship between the composite structure and sound insulation property of integrated hollow core sandwich composites,the glass fabric/epoxy resin composites with different heights,panel thicknesses and core structures were fabricated.The experiments for sound insulation property were carried out in a reverberation-anechoic chambers measuring system.The results show that the structure of glass fabric has an obvious influence on the sound insulation property of integrated hollow core sandwich composites.The sound properties of the composites increase gradually with the increase in height.The panel thickness has a greater impact on the sound insulation properties of the composites,and the effect of core structure is relatively weak.The sound insulation property of the composites with 8 shaped core structure is slightly higher than that of the composites with 88 shaped and X shaped core structure.

  16. Biomineralization of electrospun poly(L-lactic acid)/gelatin composite fibrous scaffold by using a supersaturated simulated body fluid with continuous CO{sub 2} bubbling

    Energy Technology Data Exchange (ETDEWEB)

    Cai Qing; Xu Qingqing; Feng Qiaofang; Cao Xiaoyan [Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China); Yang Xiaoping, E-mail: yangxp@mail.buct.edu.cn [Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China); Deng Xuliang [School and Hospital of Stomatology, Peking University, Beijing 100081 (China)

    2011-09-15

    To promote the biomineralization, supersaturated simulated body fluids (SBFs), e.g. five times SBF (5 x SBF), were usually applied. In these SBFs, however, homogeneous nucleation of Ca-P mineralites and deposition unavoidably took place owing to the HCO{sub 3}{sup -} decomposition and the pH value increment, which made the prediction of bone bioactivity of substrates controversial. In this study, the classically prepared 5 x SBF was continuously bubbled with CO{sub 2} to keep the pH value stable at 6.4 and the solution transparent, and a kind of electrospun poly(L-lactic acid)/gelatin composite fibers was used for the biomineralization study. In such a modified 5 x SBF, heterogenenous nucleation occurred dominantly and thermodynamical unstable brushites (dicalcium phosphate dihydrate, DCPD) were detected shortly on both electrospun PLLA fibers and PLLA/gelatin (1:1 in weight) composite fibers. In comparison with electrospun PLLA fibers, the sheet-like DCPD mineralites transformed into flaky carbonated calcium-deficient hydroxyapatite (CDHA) within 24 h on the PLLA/gelatin composite fibers due to the accelerating effect of gelatin component. The formed apatite coating contained much less Mg{sup 2+} ions than that deposited in the classical 5 x SBF. The results of this study showed that supersaturated SBFs buffered with gassy CO{sub 2} were expected good choices for the accelerated biomineralization, and for the prediction of the bone bonding bioactivity of substrates.

  17. 钢蒙皮-复合材料芯材夹层板弯曲性能研究%Research on Bending Properties of Metal Faced-composite Core Sandwich Panel

    Institute of Scientific and Technical Information of China (English)

    王跃; 方海; 刘伟庆

    2015-01-01

    Sandwich structure consisting of steel and glass fiber reinforced composite (GFRP) core pultruded hollow square tube was proposed .Bending experiment of metal faced‐composite core sandwich beam through using four‐point bending test method was carried out .The distribution of strain ,the mid‐span deflections and the ultimate failure of the slab w ere analyzed .T he effective bending stiffness of metal faced‐composite core sandwich panel was deduced by transformed section method ,and the mid‐span displacement computational formula was deduced by mechanics of materials theory .The mid‐span deflections of samples were calculated .The theory results and test results were compared and they fitted well .The study results show that when the thickness of the core is constant , the mid‐span deflection decreases with increasing thickness of metal f aced .%采用钢板蒙皮与玻璃纤维增强复合材料(GFRP)拉挤成型的空心方管芯材组成夹层结构,运用四点弯曲试验方法,开展了钢蒙皮‐复合材料芯材夹层梁的受弯性能试验,研究了其受力性能情况、跨中上下面板应力分布和跨中挠度。运用换算截面法推导出钢蒙皮‐复合材料芯材夹层板截面有效抗弯刚度,并采用材料力学理论推导出夹层板跨中挠度计算公式,计算各试件的跨中上下面板应力分布情况和跨中挠度。研究结果表明:当芯材厚度一致时,试件的跨中挠度随着钢板面层厚度的增加而逐渐减小;跨中挠度理论值与试验值吻合较好。

  18. Analysis Of Laminated and Sandwich Composites by A Zig-Zag Plate Element with Variable Kinematics and Fixed Degrees Of Freedom

    Directory of Open Access Journals (Sweden)

    Ugo Icardi

    2015-01-01

    Full Text Available A C° layerwise plate element with standard nodal d.o.f. and serendipity interpolation functions is applied to the analysis of laminates and sandwiches giving rise to strong layerwise effects. The element is obtained using an energy updating technique and symbolic calculus starting from a physically-based zig-zag model with variable kinematics and fixed d.o.f. able to a priori satisfy to displacement and stress continuity at the material interfaces. Non classical feature, a high-order piecewise zig-zag variation of the transverse displacement is assumed as it helps keeping equilibrium. Crushing of core is studied carrying apart a detailed 3D modelling of the honeycomb structure discretizing the cell walls with plate elements, with the aim of obtaining apparent elastic moduli at each load level. Using such apparent moduli, a 2D homogenized analysis is carried out simulating sandwiches as multi-layered structures Applications are presented to plates undergoing impulsive loading incorporating plies with spatially variable stiffness properties. It is shown that accurate predictions are always obtained in in the numerical applications with a very low computational effort. Compared to kinematically based zig-zag models, present physically based one is proven to more accurate, being always in a good agreement with exact 3D solutions.

  19. Integrated effect of supramolecular self-assembled sandwich-like melamine cyanurate/MoS{sub 2} hybrid sheets on reducing fire hazards of polyamide 6 composites

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Xiaming [State Key Laboratory of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Suzhou Key Laboratory of Urban Public Safety, Suzhou Institute for Advanced Study, University of Science and Technology of China, Suzhou, Jiangsu 215123 (China); Wang, Xin, E-mail: wxcmx@ustc.edu.cn [State Key Laboratory of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Cai, Wei; Hong, Ningning [State Key Laboratory of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Hu, Yuan, E-mail: yuanhu@ustc.edu.cn [State Key Laboratory of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Suzhou Key Laboratory of Urban Public Safety, Suzhou Institute for Advanced Study, University of Science and Technology of China, Suzhou, Jiangsu 215123 (China); Liew, Kim Meow [Suzhou Key Laboratory of Urban Public Safety, Suzhou Institute for Advanced Study, University of Science and Technology of China, Suzhou, Jiangsu 215123 (China); Department of Architectural and Civil Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon (Hong Kong)

    2016-12-15

    A novel strategy of using supramolecular self-assembly for preparing sandwich-like melamine cyanurate/MoS{sub 2} sheets as the hybrid flame retardants for polyamide 6 (PA6) is reported for the first time. The introduction of MoS{sub 2} sheets function not only as a template to induce the formation of two-dimensional melamine cyanurate capping layers but also as a synergist to generate integrated flame-retarding effect of hybrid sheets, as well as a high-performance smoke suppressor to reduce fire hazards of PA6 materials. Once incorporating this well-designed structures (4 wt%) into PA6 matrix, there resulted in a remarkable drop (40%) in the peak heat release rate and a 25% reduction in total heat release. Moreover, the smoke production and pyrolysis gaseous products were efficiently suppressed by the addition of sandwich-like hybrid sheets. The integrated functions consisting of inherent flame retarding effect, physical barrier performance and catalytic activity are believed to the crucial guarantee for the reduced fire hazards of PA6 nanocomposites. Furthermore, this novel strategy with facile and scalable features may provide reference for developing various kinds of MoS{sub 2} based hybrid sheets for diverse applications.

  20. Non-steady-state aerosol filtration in nanostructured fibrous media.

    Science.gov (United States)

    Przekop, Rafal; Gradoń, Leon

    2011-06-28

    The filtration of aerosol particles using composites of nano- and microsized fibrous structures is a promising method for the effective separation of nanoparticles from gases. A multi-scale physical system describing the flow pattern and particle deposition at a non-steady-state condition requires an advanced method of modelling. The combination of lattice Boltzmann and Brownian dynamics was used for analysis of the particle deposition pattern in a fibrous system. The dendritic structures of deposits for neutral and charged fibres and particles are present. The efficiency of deposition, deposit morphology, porosity and fractal dimension were calculated for a selected operational condition of the process.

  1. A Debonded Sandwich Specimen Under Mixed Mode Bending (MMB)

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2008-01-01

    Face/core interface crack propagation in sandwich specimens is analyzed. A thorough analysis of the typical failure modes in sandwich composites was performed in order to design the MMB specimen to promote face/core debond fracture. Displacement, compliance and energy release rate expressions...... for the MMB specimen were derived from a superposition analysis. An experimental verification of the methodology proposed was performed using MMB sandwich specimens with H100 PVC foam core and E-glass/polyester non-crimp quadro-axial [0/45/90/-45]s DBLT-850 faces. Different mixed mode loadings were applied...

  2. A Debonded Sandwich Specimen Under Mixed Mode Bending (MMB)

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2008-01-01

    Face/core interface crack propagation in sandwich specimens is analyzed. A thorough analysis of the typical failure modes in sandwich composites was performed in order to design the MMB specimen to promote face/core debond fracture. Displacement, compliance and energy release rate expressions...... for the MMB specimen were derived from a superposition analysis. An experimental verification of the methodology proposed was performed using MMB sandwich specimens with H100 PVC foam core and E-glass/polyester non-crimp quadro-axial [0/45/90/-45]s DBLT-850 faces. Different mixed mode loadings were applied...

  3. Preparation and Compressive Properties of 3D Woven Sandwich Composites%三维机织夹芯复合材料的制备与压缩性能研究

    Institute of Scientific and Technical Information of China (English)

    王梦远; 曹海建; 钱坤; 袁守忍

    2013-01-01

    Using glass fiber as raw material,two systems of warp (one for the upper and lower surface,the other for the folder core layer) and one system of weft were employed to make the new 3D sandwich fabric whose meridional cross-section was a rectangle on the SU111-automatic rapier.Using the epoxy resin E-44 and the type of 9055 curing agent as the matrix system,the woven fabric was made into 3D woven sandwich composites through the hand lay-up process.The compressive properties of 3D woven sandwich composites were studied,and the relationship between structure and compressive properties was analyzed and compared with the "8"-shaped hollow composite material.The results show that the compressive strength of the "8"-shaped hollow composite material whose spacing of core material is 5 mm is better than 3D woven sandwich composites whose spacing of core material is 25 mm.But the elastic modulus of the lattar is higher than the former.The results are extremely valuable in guiding the optimization and mechanical property study on this kind of materials.%以玻璃纤维为原料,采用2个系统经纱(一个为上下表层经纱,另一个为夹芯层经纱)、1个系统纬纱,在SU111型全自动剑杆织机上制织经向截面为“口”字形的新型三维夹芯织物.以环氧树脂E-44与9055型固化剂为基体体系,采用手糊成型工艺将上述机织物复合制成三维机织夹芯复合材料.研究三维机织夹芯复合材料的压缩性能,分析材料结构与压缩性能之间的关系,并与“8”字形中空复合材料进行比较.结果表明,芯材间距为5mm的“8”字形中空复合材料的压缩强度高于芯材间距为25 mm的三维机织夹芯复合材料,但是后者的弹性模量高于前者.实验结果对该类结构材料的优化设计与力学性能研究具有极其重要的指导价值.

  4. 4D fibrous materials: characterising the deployment of paper architectures

    Science.gov (United States)

    Mulakkal, Manu C.; Seddon, Annela M.; Whittell, George; Manners, Ian; Trask, Richard S.

    2016-09-01

    Deployment of folded paper architecture using a fluid medium as the morphing stimulus presents a simple and inexpensive methodology capable of self-actuation; where the underlying principles can be translated to develop smart fibrous materials capable of programmable actuations. In this study we characterise different paper architectures and their stimuli mechanisms for folded deployment; including the influence of porosity, moisture, surfactant concentration, temperature, and hornification. We observe that actuation time decreases with paper grammage; through the addition of surfactants, and when the temperature is increased at the fluid-vapour interface. There is a clear effect of hydration, water transport and the interaction of hydrogen bonds within the fibrous architecture which drives the deployment of the folded regions. The importance of fibre volume fraction and functional fillers in shape recovery was also observed, as well as the effect of a multilayer composite paper system. The design guidelines shown here will inform the development of synthetic fibrous actuators for repeated deployment.

  5. Lightweight Sandwich Panel in Cold Stores and Refrigerated Warehouses

    OpenAIRE

    Chidom, Charles

    2013-01-01

    The use of sandwich panels has gained considerable recognition in the construction industry and more use of this composite structure is ever increasing. This study highlights and familiarizes the use of lightweight sandwich panel in refrigerated warehouses and cold storage facility and construction and the challenges such construction faces in warm climates considering the effects of thermal load. The study was commissioned by HAMK Sheet Metal Center, the steel research and development ce...

  6. PVDF/SiO2复合纤维膜的制备及电化学性能%Preparation and Electrochemical Properties of PVDF/SiO2 Composite Fibrous Membranes

    Institute of Scientific and Technical Information of China (English)

    彭淑静; 梁银峥

    2015-01-01

    PVDF/SiO2 composite fibrous membranes with 2%, 5%, and 8% of SiO2 were prepared by elec-trospinning method respectively, and their mechanical properties and electrochemical properties were tested as well as the performance of assembled battery. The results show that the addition of SiO2 has great in-fluence on the fiber diameter and morphology of electrospinning PVDF composite membranes. With the increase of SiO2 content, the fiber diameter and its distribution of the PVDF/SiO2 composite membrane become thinner and wider, and the surface uniformity of fiber reduces; its mechanical properties, electro-lyte uptake, and ionic conductivity increase at first and then decrease. The battery, assembled using PVDF/SiO2 composite membrane with 5% of SiO2, shows good charge and discharge performance, and its first discharge capacity is 158 mAh/g. The capacity retention ratio could reach 91% after 50 charge-discharge cycles.%采用静电纺丝法制备了SiO2含量分别为2%、5%和8%的PVDF/SiO2复合纤维膜,对复合纤维膜的物理性能、电化学性能以及组装电池性能等进行了测试分析。结果表明:纳米SiO2含量对静电纺PVDF基膜的纤维直径和形貌影响很大,随着SiO2含量的增加,静电纺PVDF/SiO2复合纤维膜的纤维直径变细且分布变宽,纤维表面的均匀性降低;其力学性能、电解液吸液率以及离子电导率均先增加后降低。以含量为5%的SiO2静电纺PVDF/SiO2复合纤维膜为隔膜组装的电池首周充放电容量最高,约为158 mAh/g;经过50周充放电循环后,电池的容量保持率最高为91%。

  7. 三明治型电磁屏蔽功能复合板材的制备及性能研究∗%Processing and properties of electromagnetic shielding sandwich composite panels

    Institute of Scientific and Technical Information of China (English)

    贾立霞; 刘君妹; 王瑞; 王慧霞; 关礼争

    2015-01-01

    Stainless steel filaments were added in the faces of the woven spacer fabrics which were made from high-strength technical polyester filaments.Then new type of electromagnetic shielding sandwich composite panels was built by filling foam in woven spacer fabric and combining the epoxy resin on the surface.The elec-tromagnetic shielding,flatwise compressive property and flexural property of each type of sandwich composite panels were tested.The analysis indicated that the panels with stainless steel filament grids get good shielding effectiveness in the range of high frequencies.The panels with filament grids in two face exhibited better shiel-ding effectiveness than the panels with grids in one face and the shielding effectiveness exceeded 30 dB in some frequency.The introduction of the stainless steel filaments did not influence the mechanical property of the new type sandwich panels.%以高强涤纶工业丝和不锈钢长丝配伍织制的机织间隔织物为增强体,在间隔织物空间中进行泡沫填充,织物表面进行树脂复合,制备了三明治型功能复合板材。对不锈钢长丝网格配置对板材的电磁屏蔽性能的影响进行了实验分析,并对比分析了不锈钢长丝网格的引入对三明治型复合板材的力学性能的影响。研究表明,面层中添加不锈钢长丝网格后,复合板材具有了电磁屏蔽效能,双面添加不锈钢长丝网格的板材屏蔽效能明显优于只单面添加不锈钢长丝网格的板材,在高频区域屏蔽效能达到了30 dB 以上。不锈钢网格的添加未对复合板材的整体力学性能造成显著影响。

  8. 复合材料蜂窝夹芯板低速冲击损伤研究%Studies on Low-velocity Impact damage of Composite Honeycomb Sandwich Panel

    Institute of Scientific and Technical Information of China (English)

    李进亚; 许希武; 毛春见

    2012-01-01

    A 3D dynamic finite element model is proposed to predict the progressive damage of composites honeycomb core sandwich due to low impact. The core of this model was equivalent to a uniform orthogonal anisotropic materials. This model consists of Hashin damage criterion and Yeh failure criterion for face-plate, and deg-radate the material property which is damaged. Combined with the user-defined material constitutive program of Abaqus , the failure criterion and degra dation of material property are simulated . The dynamic response and dam-age propagation of comp osites honeycomb core sandwich due to low impact were simulated with this method. The numerical results is compared with the experiment results, it prove that the method was reasonable. The effects of the parameters on the dynamic response and damage evolution of composites honeycomb core sandwich are discussed in this paper.%通过三维动力学有限元建立了复合材料蜂窝夹芯板在低速冲击作用下的渐进损伤分析模型.该模型中将蜂窝夹芯等效为均匀的正交各项异性材料.采用基于应变的Hashin三维失效准则和Yeh分层失效准则对面板损伤进行判断.使用部分刚度折减对损伤材料性能进行退化.利用用户子程序将损伤判据和刚度折减方案引入到ABAQUS软件中.模拟了复合材料蜂窝夹芯板低速冲击损伤渐进过程,并与试验结果进行验证.证明了该方法的合理性,最后讨论了各种参数对冲击响应和冲击损伤的影响.

  9. Comparative study on bulk and composite fibrous samples photophysical feature: synthesis and characterization of a fluorine-containing Re(I) complex and its electrospinning fibers.

    Science.gov (United States)

    Lin, Chen; Shaoyan, Wang; Cangming, Zhao; Qi, Wang

    2015-05-01

    This paper reported a diamine ligand 2-(4-fluorophenyl)-5-(pyridin-2-yl)-1,3,4-oxadiazole (referred to as FPOZ) owing two typical electron-withdrawing moieties of an oxidiazole group and a fluorine atom, as well as its corresponding Re(I) complex Re(CO)3(FPOZ)Br. Geometric structure and electronic nature of Re(CO)3(FPOZ)Br were explored and discussed by single crystal analysis and theoretical calculation, which suggested that Re(CO)3(FPOZ)Br took a distorted octahedral coordination field. The onset electronic transitions owned a mixed character of metal-to-ligand-charge-transfer (MLCT) and ligand-to-ligand-charge-transfer (LLCT). Re(CO)3(FPOZ)Br was then doped into a polymer host. Photophysical difference between resulting composite fibers and bulk Re(CO)3(FPOZ)Br was carefully performed, so that the correlation between emissive performance and electron-withdrawing group/geometric relaxation could be investigated. It was found that the immobilization in polymer matrix could repress MLCT excited state geometric relaxation, leading to improved PL parameters such as emission blue shift, longer excited state lifetime and higher photostability.

  10. Intercalation assembly of Li{sub 3}VO{sub 4} nanoribbons/graphene sandwich-structured composites with enhanced oxygen reduction catalytic performance

    Energy Technology Data Exchange (ETDEWEB)

    Huang, K.; Ling, Q.N.; Huang, C.H.; Bi, K. [State Key Laboratory of Information Photonics and Optical Communications & School of Science, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Wang, W.J.; Yang, T.Z. [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Lu, Y.K. [School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083 (China); Liu, J., E-mail: liujun4982004@csu.edu.cn [School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083 (China); Zhang, R.; Fan, D.Y.; Wang, Y.G. [State Key Laboratory of Information Photonics and Optical Communications & School of Science, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Lei, Ming, E-mail: mlei@bupt.edu.cn [State Key Laboratory of Information Photonics and Optical Communications & School of Science, Beijing University of Posts and Telecommunications, Beijing 100876 (China)

    2015-10-15

    Novel sandwich-like nanocomposites of alternative stacked ultrathin Li{sub 3}VO{sub 4} nanoribbons and graphene sheets (LVO-G) were successfully developed by a facile intercalation assembly method with a post heating treatment. The characterization results demonstrate that the average size of the Li{sub 3}VO{sub 4} nanoribbons with a non-layered crystal structure is a few micrometers in length, 50–100 nm in width and a few atomic layers in height. The addition of graphene sheets can modify the preferred orientation of the Li{sub 3}VO{sub 4} nanoribbons from (110) to (011) plane and restrict the growth of impurity phase at the same time. In addition, EIS analysis has also verified the reduced resistance and thus the enhance conductivity of LVO-G nanocomposites compared with bare Li{sub 3}VO{sub 4} nanoribbons. What's more, the electrocatalytic performances of these novel LVO-G nanocomposites for oxygen reduction reaction (ORR) in alkaline solution are further investigated by cyclic voltammetry (CV), rotating disk electrode (RDE) and chronoamperometry test. It is found that the enhanced activity and stability of LVO-G can be attributed to the synergistic effect between the Li{sub 3}VO{sub 4} nanoribbons and graphene sheets with a larger reduction current density and a smaller onset potential value for LVO-G25 compared with LVO-G50 due to the change of components. - Highlights: • Novel sandwich-structured LVO-G by a facile intercalation assembly method. • Addition of G sheets can modify the preferred orientation of Li{sub 3}VO{sub 4} nanoribbon. • Enhanced ORR activity and stability due to synergistic effect are demonstrated.

  11. Transient Thermal Testing and Analysis of a Thermally Insulating Structural Sandwich Panel

    Science.gov (United States)

    Blosser, Max L.; Daryabeigi, Kamran; Bird, Richard K.; Knutson, Jeffrey R.

    2015-01-01

    A core configuration was devised for a thermally insulating structural sandwich panel. Two titanium prototype panels were constructed to illustrate the proposed sandwich panel geometry. The core of one of the titanium panels was filled with Saffil(trademark) alumina fibrous insulation and the panel was tested in a series of transient thermal tests. Finite element analysis was used to predict the thermal response of the panel using one- and two-dimensional models. Excellent agreement was obtained between predicted and measured temperature histories.

  12. A study of structurally efficient graphite-thermoplastic trapezoidal-corrugation sandwich and semi-sandwich panels

    Science.gov (United States)

    Jegley, Dawn C.

    1993-01-01

    The structural efficiency of compression-loaded trapezoidal-corrugation sandwich and semi-sandwich composite panels is studied to determine their weight savings potential. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them, and semi-sandwich panels with a corrugation attached to a single skin are considered. An optimization code is used to find the minimum weight designs for critical compressive load levels ranging from 3,000 to 24,000 lb/in. Graphite-thermoplastic panels based on the optimal minimum weight designs were fabricated and tested. A finite-element analysis of several test specimens was also conducted. The results of the optimization study, the finite-element analysis, and the experiments are presented.

  13. 复合材料夹芯梁屈曲破坏模式及极限承载%Buckling failure mode and ultimate load of composite sandwich beam

    Institute of Scientific and Technical Information of China (English)

    陈悦; 朱锡; 李华东; 朱子旭

    2016-01-01

    In order to investigate the buckling,postbuckling characteristics and load capacity of composite sand-wich beam under the effect of axial compression,test investigation and finite element simulation were carried out. Firstly,a series of buckling characteristic tests of composite sandwich beams were conducted.The effects of ply ra-tio angle,length of beam,face layer thickness and core layer thickness on buckling,postbuckling failure modes and ultimate load were discussed.Then,based on the nonlinear buckling theory,3D cohesive interface elements were used to simulate the debond between skin and core,and initial predeformation as well as material damage criteria were also introduced to simulate and investigate the buckling characteristics and ultimate load of composite sandwich beam under axial compression.The results show that interface debond is the important mode of buckling failure. Comparing the ultimate load calculated by simulation with the test results,the errors are controlled within 10%. The conclusions obtained prove that the method can predict the postbuckling path,failure mode and ultimate load ac-curately.%为研究复合材料夹芯梁在轴压作用下的屈曲、后屈曲特性及承载能力,进行了试验研究与有限元仿真。首先,开展了系列复合材料夹芯梁屈曲特性试验,研究了铺层比例、梁长度、表层厚度及芯层厚度等因素对其屈曲、后屈曲破坏模式及极限承载的影响;然后,基于非线性屈曲理论,采用三维内聚力界面单元模拟面芯脱粘,并引入初始预变形及材料损伤准则对复合材料夹芯梁在轴压下的屈曲特性及极限承载进行仿真研究。结果显示:界面脱粘是屈曲破坏的重要模式;仿真计算的极限承载与试验结果相比,误差控制在10%以内。所得结论表明该方法可有效预报复合材料夹芯梁的后屈曲路径、破坏模式及极限承载。

  14. 水下夹芯复合空腔结构声学特性试验研究%Tests for acoustic-stealth characteristics of underwater sandwich composite structures with cava

    Institute of Scientific and Technical Information of China (English)

    罗忠; 周欣

    2014-01-01

    引入空腔改善夹芯复合结构低频段吸声性能。建立了三种典型水下声隐身结构声学系统模型,在数值分析吸声性能影响因素基础上,运用脉冲声管试验方法,分析了空气背衬“硬”边界条件和水背衬“软”边界条件下,有无空腔试样、不同空腔间距、空腔形状和深度对谐振吸声峰值及峰值频率等的影响。试验结果表明,空腔显著改善了夹芯复合结构低频段吸声性能;空气背衬下,空腔间距越小,首阶谐振吸声峰值越大,峰值频率越低,水背衬条件下则相反;空腔体积越大,首阶谐振吸声峰值越小,峰值频率越低。%Introducing cava can improve the sound-absorption ability of a sandwich composite structure within a low-frequency range.The acoustic models for 3 kinds of typical underwater acoustic-stealth structures were established. The affect factors of their sound-absorption ability were analyzed numerically.Then,using the test method of pulse sound tube,the effects of samples with cava or without cava,different distances between cava,shape and depth of cava on the peak value of sound-absorption resonance and its frequency of the structures were analyzed under hard boundary condition and air background as well as soft boundary condition and water background.The results showed that the cava obviously improve the sound-absorption ability of sandwich composite structures within a low-frequency range;under air background,the smaller the distance between cava,the larger the peak value of the 1 st order sound-absorption resonance and the lower the corresponding frequency;under water background,the situation is the opposite;the bigger the volume of cava,the smaller the peak value of the 1 st order sound-absorption resonance and the lower the corresponding frequency.

  15. 环氧树脂基轻质芯材夹层复合吸声结构的水声性能%Underwater Acoustic Properties of Sound Absorption Structure of Sandwich Composites Based on Light Epoxy Resin Core Material

    Institute of Scientific and Technical Information of China (English)

    李浩; 梅志远; 朱锡

    2011-01-01

    Sound absorption structure of light sandwich composite based on epoxy resin (EPS) was synthesized from glass fiber, vinyl ester resins, epoxy resin, hollow glass microsphere. The underwater acoustical properties of EPS specimen were measured in the sound pulse tube and anechoic tank. The experiment results indicate that underwater acoustic properties of EPS are affected by the technological parameters of core material such as proportion of matrix, content of polyether amine curing agent and proportion of upper and lower layer. The underwater sound absorption coefficient of EPS is not less than 0.5 at 5 kHz ~ 30 kHz with the relative density 0.8 + 0.05 and thickness 25 mm of core material by regulating the technological parameters. EPS has a low density and excellent underwater sound stealth properties. The application range of sound absorption structure of sandwich composite will be enlarged. Then, sound absorption mechanism of EPS was analyzed.%用玻璃纤维、乙烯基树脂、环氧树脂和空心玻璃微珠等为原料合成了环氧树脂基轻质夹层复合吸声结构(EPS),在脉冲声管和消声水池中测试了EPS试件的反射系数和吸声系数,测试结果表明,EPS的水声性能受到芯材基体比例、聚醚胺固化剂含量及分层比例等工艺参数的影响,通过合理控制这些参数,可以使芯材相对密度0.8±0.05、厚度25 mm的EPS在5kHz~30kHz频段内平均吸声系数不低于0.5,具有质轻和良好的水下声隐身能力,扩大了夹层复合吸声结构的使用范围.最后对EPS的吸声机理进行了分析.

  16. Impact damage behavior of sandwich composite with aluminum foam core%泡沫铝芯三明治型复合材料的冲击损伤行为

    Institute of Scientific and Technical Information of China (English)

    Moon Sik HAN; Jae Ung CHO

    2014-01-01

    Impact property of the sandwich composite with aluminum foam core was investigated by experiment and simulation analysis. Impact energies of 50, 70 and 100 J were applied to the specimens in impact tests. The results show that the striker penetrates the upper face sheet, causing the core to be damaged at 50 J test but the lower face sheet remains intact with no damage. At 70 J test, the striker penetrates the upper face sheet and the core,and causes the lower face sheet to be damaged. Finally at 100 J test, the striker penetrates both the upper face sheet and the core, and even the lower face sheet. The experimental and simulation results agree with each other. By the confirmation with the experimental results, all these simulation results can be applied on structure study of real sandwich composite with aluminum foam core effectively.%通过实验和模拟分析研究泡沫铝芯三明治型复合材料的冲击性能。在冲击测试时,试件所受冲击能分别为50、70和100 J。结果表明,在冲击能为50 J的冲击测试中,冲头穿透了试件的上部面板,使芯部受到损伤,但下部面板完好无损;在70 J 的冲击测试中,冲头穿透了试件的上部面板和芯部,并使下部面板受到损伤;在100 J 的冲击测试中,冲头不但穿透了试件的上部面板和芯部,还穿透了下部面板。实验结果与模拟结果互相吻合。实验结果的验证表明,所有模拟结果均可有效地应用于真实泡沫铝芯三明治型复合材料的结构研究。

  17. Optic Nerve Decompression for Orbitofrontal Fibrous Dysplasia

    OpenAIRE

    Abe, Takumi; Sato, Kaneshige; Otsuka, Takaharu; Kawamura, Noriyoshi; Shimazu, Motohiko; Izumiyama, Hitoshi; Matsumoto, Kiyoshi

    2002-01-01

    Orbitofrontal fibrous dysplasia often involves the bony orbit and the optic canal. Although fibrous dysplasia reportedly produces compression of the optic nerve leading to visual distrubances, optic nerve decompression in patients without clinical signs of optic neuropathy is still controversial. We describe two patients with orbitofrontal fibrous dysplasia without signs of visual disturbance and one patient with McCune-Albright syndrome and progressive visual impairment. Optic nerve decompre...

  18. Oral benign fibrous histiocytoma: two case reports

    OpenAIRE

    Menditti, Dardo; Laino, Luigi; Mezzogiorno, Antonio; Sava, Sara; Bianchi, Alexander; Caruso, Giovanni; Di Maio, Luigi; Baldi, Alfonso

    2009-01-01

    Fibrous histiocytoma is a benign soft tissue tumour arising as a fibrous mass everywhere in the human body. The involvement of the oral cavity is rare. We report two cases of benign fibrous histiocytoma that localized in the oral cavity. The clinical and histological features of the lesion are reported. Finally, a literature revision of this pathology at the level of the oral cavity is reported.

  19. Morphology and Fibrous Composite Structure of Egg Cases of Three Middle-size Spiders%3种中型蜘蛛卵袋形态特征与纤维组成结构

    Institute of Scientific and Technical Information of China (English)

    蒋平; 吕太勇; 肖永红; 廖信军; 郭聪

    2012-01-01

    采用扫描电镜和氨基酸自动分析仪对球蛛科( Theridiidae)温室拟肥腹蛛(Parasteatoda tepidariorum)、肖蛸蛛科(Tetragnathidae)肩斑银鳞蛛(Leucauge blanda)及狼蛛科(Lycosidae)猴马蛛(Hippasa holmerae)3种中型蜘蛛卵袋的超微结构和氨基酸组成进行了观察.形态观察表明,这3种蜘蛛的卵袋形态各异,温室拟肥腹蛛卵袋一头尖,呈梨状;肩斑银鳞蛛卵袋呈扁平状;猴马蛛卵袋呈椭球形.扫描电镜观察表明,温室拟肥腹蛛卵袋外覆盖层仅仅由一种均一直径的柱状腺丝组成,而另外2种蜘蛛卵袋外覆盖层主要由柱状腺丝与少量其他丝腺纺出的丝纤维组成.氨基酸组成分析表明,温室拟肥腹蛛卵袋外覆盖层的丝纤维的氨基酸组成与具有保守性的其他种类蜘蛛柱状腺丝心蛋白的氨基酸组成差异较大,这表明其可能含有新的丝心蛋白家族成员.本文根据氨基酸组成与扫描电镜的结果分析探讨了不同直径丝纤维的丝腺来源.%The microstructures and fibrous composition of egg cases of three middle-size spiders, Parasteatoda tepidariorum (Theridiidae) , Leucauge blanda (Tetragnathidae) and Hippasa holmerae (Lycosidae) were examined using SEM technique and amino acid analysis. The shapes of the egg cases of the above-mentioned three spiders are pear-shaped, flabelliform ellipsoid and ellipsoid respectively. The outer cover of the egg case of P. tepidariorum is only composed with one type of silk fiber with even diameter, whereas outer covers of other two spiders' egg cases mainly consist of cylindrical gland silk together with a few other glands silk. The amino acid composition of cylindrical gland silk form P. tepidariorum egg case is very different from that of conserved Spidroin of cylindrical gland from other spiders, which indicates that cylindrical gland silk consists of unknown Spidroin. It needs to be identified through the further investigation of molecular biology. According

  20. The asymmetric sandwich theorem

    CERN Document Server

    Simons, Stephen

    2011-01-01

    We discuss the asymmetric sandwich theorem, a generalization of the Hahn-Banach theorem. As applications, we derive various results on the existence of linear functionals that include bivariate, trivariate and quadrivariate generalizations of the Fenchel duality theorem. Most of the results are about affine functions defined on convex subsets of vector spaces, rather than linear functions defined on vector spaces. We consider both results that use a simple boundedness hypothesis (as in Rockafellar's version of the Fenchel duality theorem) and also results that use Baire's theorem (as in the Robinson-Attouch-Brezis version of the Fenchel duality theorem). This paper also contains some new results about metrizable topological vector spaces that are not necessarily locally convex.

  1. Sandwich materials for wind turbine blades

    Energy Technology Data Exchange (ETDEWEB)

    Thybo Thomsen, O. [Aalborg Univ., Dept. of Mechanical Engineering, Aalborg (Denmark)

    2006-07-01

    Wind turbine blades are being manufactured using polymer matrix composite materials (PMC), in a combination of monolithic (single skin) and sandwich composites. Present day designs are mainly based on glass fibre reinforced composites (GFRP), but for very large blades carbon fibre reinforced composites (CFRP) are being used increasingly, in addition to GFRP by several manufacturers to reduce the weight. The size of wind turbines have increased significantly over the last 25 years, and this trend is expected to continue in the future. Thus, it is anticipated that wind turbines with a rated power output in the range of 8-10 MW and a rotor diameter about 170-180 m will be developed and installed within the next 10-15 years. The paper presents an overview of current day design principles and materials technology applied for wind turbine blades, and it highlights the limitations and important design issues to be addressed for up-scaling of wind turbine blades from the current maximum length in excess of 61 m to blade lengths in the vicinity of 90 m as envisaged for future very large wind turbines. In particular, the paper discusses the potential advantages and challenges of applying sandwich type construction to a larger extent than is currently being practiced for the load carrying parts of wind turbine blades. (au)

  2. Effect of layer length on deflection in sandwich beams

    Science.gov (United States)

    Abbu, Muthanna A.; AL-Ameri, Riyadh

    2017-09-01

    A theoretical study has been carried out on sandwich beams strengthened mechanically by two external steel plates attached to their tension and compression sides with so-called "shear connectors ". This study is based on the individual behaviour of each component of the composite sandwich section (i.e. reinforced concrete beam and upper steel plate and lower steel plate). The approach has been developed to simulate the behaviour of such beams, and is based on neglecting the separation between the three layers; i.e., the deflections are equal in each element through the same section. The differential equations reached were solved analytically. Deflection was calculated by using the approach for several beams, tested in two series, and close agreements were obtained with the experimental values. Furthermore, the interaction efficiency between the three elements in a composite sandwich beam has been considered thoroughly, from which the effect of some parameters, such as plate length upon the behaviour of such beams, were studied.

  3. 基于匹配追踪的蜂窝夹层复合材料损伤检测%Research on honeycomb sandwich composite structure damage detection based on matching pursuit method

    Institute of Scientific and Technical Information of China (English)

    冯勇明; 周丽; 李真

    2012-01-01

    基于Lamb波和匹配追踪时频分析方法,提出一种损伤成像方法,对蜂窝夹层复合材料结构进行损伤监测.首先针对Lamb波传播的特点,提出了匹配追踪方法的快速实现方案,该方法能准确地匹配失真变形的窄带脉冲信号,并识别Lamb波的模态;然后对由压电传感器采集到的Lamb波信号,采用匹配追踪方法提取特征信息,得到Lamb波的能量分布;在此基础上,考虑Lamb波在各向异性结构中传播速度的影响,将损伤处的散射波能量分布和各像素点对比度联系起来,得到损伤图像,将损伤的情况可视化.通过蜂窝夹层复合材料结构实验验证了该方法的可行性和有效性.%This study proposes a damage imaging method using Lamb wave and matching pursuit method time-frequency analysis for damage detection of honeycomb sandwich structure. Matching pursuit method is employed to decompose Lamb wave signals into a linear expansion of several chirplet atoms using a fast realization algorithm. The relationship between Lamb wave' s dispersion and the chirplet' s chirp rate is established, which can be used to identify the modes of Lamb waves. Then the matching pursuit method is applied to the Lamb wave signals excited and sensed by piezoelectric sensors in the time-frequency domain, which can obtain the energy distribution of the scattered waves. Considering the effect of anisotropic property on the velocity distributions of Lamb waves, the damage image can be obtained by the time-dependent energy distribution of scattered waves. The effectiveness and accuracy of the proposed method in identifying the modes and in locating defects are demonstrated by the experimental results on the honeycomb sandwich composite structure.

  4. Fibrous histiocytoma of the laryngeal glottis

    Institute of Scientific and Technical Information of China (English)

    GE Pingjiang; ZHANG Baoquan; GAO Zhiqiang; Wang Hui; CUI Quancai

    2005-01-01

    A case of a fibrous histiocytoma (FH) of the larynx in a 54-year-old male is reported. Laryngeal fibrous histiocytoma is uncommon. The case recurred several times over 4-year period. Its pathology is described including arguments on potential malignancy and the way of management.

  5. Solitary Fibrous Tumor of the Stomach

    Science.gov (United States)

    Hussain, Qulsoom; Shafique, Khurram; Hurairah, Abu; Grossman, Evan B.

    2017-01-01

    Solitary fibrous tumor is a rare mesenchymal neoplasm that usually originates from the pleura, but has been reported in other extrapleural locations. We report a rare case of a solitary fibrous tumor of the stomach, which was successfully treated with endoscopic mucosal resection. PMID:28286800

  6. Extended high order sandwich panel theory for bending analysis of sandwich beams with carbon nanotube reinforced face sheets

    Science.gov (United States)

    Jedari Salami, S.

    2016-02-01

    Bending analysis of a sandwich beam with soft core and carbon nanotube reinforced composite (CNTRC) face sheets in the literature is presented based on Extended High order Sandwich Panel Theory (EHSAPT). Distribution of fibers through the thickness of the face sheets could be uniform or functionally graded (FG). In this theory the face sheets follow the first order shear deformation theory (FSDT). Besides, the two dimensional elasticity is used for the core. The field equations are derived via the Ritz based solution which is suitable for any essential boundary condition. The influences of boundary conditions on bending response of the sandwich panel with soft core and CNTRC face sheet are investigated. In each type of boundary condition the effect of distribution pattern of CNTRCs on many essential involved parameters of the sandwich beam with functionally graded carbon nanotube reinforced composite (FG- CNTRC) face sheets are studied in detail. Finally, experimental result have been compared with those obtained based on developed solution method. It is concluded that, the sandwich beam with X distribution figure of face sheets is the strongest with the smallest transverse displacement, and followed by the UD, O and ∧-ones, respectively.

  7. Essential Oil Bioactive Fibrous Membranes Prepared via Coaxial Electrospinning.

    Science.gov (United States)

    Yao, Zhi-Cheng; Chen, Si-Cong; Ahmad, Zeeshan; Huang, Jie; Chang, Ming-Wei; Li, Jing-Song

    2017-06-01

    A novel antimicrobial composite material was prepared by encapsulating orange essential oil (OEO) in zein prolamine (ZP) via the coaxial electrospinning (ES) technique. By manipulating process parameters, the morphological features of ZP/OEO fibers were modulated. Fine fibers with diameters ranging from 0.7 to 2.3 μm were obtained by regulating ZP solution concentration and process parameters during the ES process. Optimal loading capacity (LC) and encapsulation efficiency (EE) of OEO in fibrous ZP mats were determined to be 22.28% and 53.68%, respectively, and were achieved using a 35 w/v% ZP ES solution. The encapsulation of OEO was found to be reliant on ZP solution concentration (the enveloping medium). SEM analysis indicates the surface morphology of ZP/OEO electrospun fibers is dependent on ZP solution loading volume, with lower ZP concentrations yielding defective fibrous structures (for example, beaded and spindled-string like morphologies). Furthermore, this loading volume also influences OEO LC, EE, mat water contact angle and oil retention. CCK-8 assay and cell morphology assessment (HEK293T cells) indicate no significant change with electrospun ZP and ZP/OEO fibrous membranes over an 8 h period. Antimicrobial activity assessment using Escherichia coli, suggests composite nonwovens possess sterilization properties; elucidating potential application in active food packaging, food preservation and therefore sustainability. © 2017 Institute of Food Technologists®.

  8. Nutritional fibrous osteodystrophy in goats

    Directory of Open Access Journals (Sweden)

    Paulo M Bandarra

    2011-10-01

    Full Text Available Seven out of 25 goats from a southern Brazilian flock developed nutritional fibrous osteodystrophy. Affected animals were younger than 1 year of age and were confined in stalls and fed a concentrate ration containing 1:6 calcium:phosphorus ratio. The remaining flock (35 goats was managed at pasture and showed no disease. Clinical signs were characterized by mandibular and maxillary enlargements, varying degrees of mouth opening and protruding tongue, dyspnea, apart of abnormalities of prehension and mastication. Affected animals had increased seric levels of phosphorus and parathormone, as well as higher alkaline phosphatase activity. Postmortem examination on three succumbed goats revealed bilateral enlargement of the maxilla and mandibula, and loose teeth, apart of multiple incomplete rib fractures in one of them. Severe diffuse proliferation of loose connective tissue surrounded the osteoid trabeculae, many of which were partially or completely non-mineralized. Mineralized osteoid trabeculae showed osteoclasts in the Howship's lacunae.

  9. Posttraumatic Cranial Cystic Fibrous Dysplasia

    Directory of Open Access Journals (Sweden)

    Arata Tomiyama

    2011-01-01

    Full Text Available A 14-year-old was girl admitted to our hospital with a subcutaneous mass of the occipital head. The mass had grown for 6 years, after she had sustained a head injury at the age of 6, and was located directly under a previous wound. Skull X-ray Photograph (xp, computed tomography (CT, and magnetic resonance imaging (MRI showed a bony defect and cystic changes in the skull corresponding to a subcutaneous mass. Bone scintigraphy revealed partial accumulation. The patient underwent total removal of the skull mass, and the diagnosis from the pathological findings of the cyst wall was fibrous dysplasia (FD. The radiographic findings for cystic cranial FD can be various. Progressive skull disease has been reported to be associated with head trauma, but the relationship between cranial FD and head trauma has not been previously reported. Previous studies have suggested that c-fos gene expression is a key mechanism in injury-induced FD.

  10. Mechanical evaluation with fe analysis of sandwich panels for wind turbine blade

    Energy Technology Data Exchange (ETDEWEB)

    Yasaswi, M.; Naveen, P.N.E.; Prasad, R.V. [GIET. Dept. of Mechanical Engineering, Rajahmundry (India)

    2012-07-01

    Sandwich panels are notable for their structural efficiency and are used as load bearing components in various branches of engineering, especially in aerospace and marine industries. The objective of the present work is to perform computer-aided analysis on sandwich panels. The analysis of sandwich panel with truss core are compared with other four types of sandwich panel with continuous corrugated core, top hat core, zed core and channel core. The basic reason to use sandwich structure is to save weight, however smooth skins and excellent fatigue resistance are also attributes of a sandwich structure. A sandwich is comprised of two layered composite materials formed by bonding two or more thin facings or face sheets to relatively thick core materials. In this type of construction the facings resist nearly all of the in-plane loads and out-of-plane bending moments. The thin facings provide nearly all of the bending stiffness because they are generally of a much higher modulus material is located at a greatest distance from the neutral axis of the component. The basic concept of sandwich panel is that the facings carry the bending loads and the core carries the shear loads. The main function of the core material is to distribute local loads and stresses over large areas. From all this analysis it is concluded that the truss core Sandwich panels can be used in wind turbine blade design. (Author)

  11. Damage assessment of compression loaded debond damaged sandwich panels

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian; Quispitupa, Amilcar;

    2010-01-01

    Sandwich composites with face sheets of fiber-reinforced plastics (FRP) and cores of polymer foam offer a lightweight construction that is well suited to wind turbine blades, naval and other vessels for high-speed operation or where payload considerations require that the structural weight...... with an implanted circular face/core debond. Compression tests were conducted on intact sandwich panels and panels with an implanted circular face/core debond with three different types of foam core materials (PVC H130, PVC H250 and PMI 51-IG). The strains and out-of-plane displacements of the debonded region were...

  12. BMP-2 immobilized PLGA/hydroxyapatite fibrous scaffold via polydopamine stimulates osteoblast growth.

    Science.gov (United States)

    Zhao, Xingyu; Han, Yu; Li, Jiawei; Cai, Bo; Gao, Hang; Feng, Wei; Li, Shuqiang; Liu, Jianguo; Li, Dongsong

    2017-09-01

    Combining biomaterials scaffolds with bone morphogenetic protein-2 (BMP-2) is currently used to promote the regeneration of bone tissue. However, the traditional strategies used to add BMP-2 into the polymer scaffolds directly suffer from limitations that can result in lower growth factor loading and damage the bioactivity of growth factors. In this study, we report the fabrication of poly(lactide-co-glycolide)/hydroxyapatite (PLGA/HA) composite fibrous scaffolds via melt-spinning method to mimic native extracellular matrix (ECM). In order to effectively immobilize BMP-2 on PLGA/HA composite fibrous scaffolds, the surface of the scaffold was modified with polydopamine (PDA) (PDA-PLGA/HA). PDA was chosen as an adhesive polymeric bridge-layer between PLGA/HA fibrous scaffolds and BMP-2. Analysis of the scaffold using scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscope revealed that the PDA coating was attached to the scaffold surface. Moreover, analysis of the scaffold using water contact angle demonstrated an increased hydrophilicity via PDA modification. Furthermore, the PDA coating effectively immobilized BMP-2 on the PDA-PLGA/HA fibrous scaffold and a sustained release profile of BMP-2 was achieved in the BMP-2-immobilized PLGA/HA fibrous scaffold. In vitro experiments showed that BMP-2-immobilized PLGA/HA fibrous scaffold significantly promoted the attachment and proliferation of MC3T3-E1 cells. More importantly, the ALP activity, mRNA expression of osteosis-related genes and calcium deposition in MC3T3-E1 cells cultured on BMP-2-immobilized PLGA/HA fibrous scaffold were significantly increased. These results collectively demonstrate that the BMP-2-immobilized PLGA/HA fibrous scaffold is a promising candidate for bone regeneration. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Elastic-plastic deformation of sandwich rod on elastic basis

    Institute of Scientific and Technical Information of China (English)

    GU Yu

    2008-01-01

    Sandwich composite material possesses advantages of both light weight and high strength.Although the mechanical behaviors of sandwich composite material with the influence of single external environment have been intensively studied,little work has been done in the study of mechanical property,in view of the nonlinear behavior of sandwich composites in the complicated external environments.In this paper,the problem about the bending of the three-layer elastic-plastic rod located on the elastic base,with a compressibly physical nonlinear core,has been studied.The mechanical response of the designed three-layer elements consisting of two bearing layers and a core has been examined.The complicated problem about curving of the three-layer rod located on the elastic base has been solved.The convergence of the proposed method of elastic solutions is examined to convince that the solution is acceptable.The calculated results indicate that the plasticity and physical nonlinearity of materials have a great influence on the deformation of the sandwich rod on the elastic basis.

  14. Bending moment of galvanized iron glass fiber sandwich panel

    Directory of Open Access Journals (Sweden)

    Gurustal Somnath Swamy

    2016-05-01

    Full Text Available The main objective of this project is to prepare a laminated with Galvanized iron thickness fractions, fiber volume fractions and orientation in the layers of GF were fabricated by hand lay-up method and evaluated for their bending moment properties of the sandwich panel using universal testing machine. This paper theoretically calculates the bending behavior of sandwich panel. The recent need to develop a new range of materials has resulted in the development of high performance lightweight composites with excellent properties. Metal– composite systems consist of alternating layers of metal and fiber-reinforced polymer composites which are bonded by an adhesive. Sandwich beams were tested under Air Bending. Stress-strain and stress-displacement were recorded by using AIMIL UTM. The beam face sheets exhibited a softening non-linearity on the bending side. Experimental results were in good agreement with predictions from simple models. On an overall basis, the sandwich panel exhibited better bending moment performance than the monolithic galvanized iron

  15. Buckling failure investigation of composite material sandwich beam with face/core debond%含面芯脱粘缺陷复合材料夹芯梁屈曲失效研究

    Institute of Scientific and Technical Information of China (English)

    陈悦; 朱锡; 李华东; 朱子旭

    2016-01-01

    为研究面芯脱粘缺陷对复合材料夹层结构屈曲特性的影响,对含贯穿矩形面芯脱粘缺陷的复合材料夹芯梁进行了试验和仿真研究.轴向压缩试验发现:试件破坏模式为混合屈曲失效,承载过程可划分为轴向压缩、局部屈曲、混合屈曲和坍塌失效四个阶段.在试验基础上,基于A baqus非线性弧长算法,对复合材料夹芯梁的极限载荷及后屈曲路径进行模拟.采用三维内聚力单元模拟预制脱粘缺陷,从破坏模式和极限载荷两个方面与试验结果进行对比,误差为6.51%,验证了数值计算方法的可靠性.有限元分析发现:随芯层模量增加,极限荷载先非线性增长后线性增长;当缺陷因子为0.052时,极限荷载为完整结构的80%,为确保结构的承载特性,应在缺陷因子达到0.05前及时进行脱粘区域修补.%In order to research the effect of face/core debond on buckling behaviors of composite sand‐wich beam ,an experimental and numerical study of the in‐plane compressive failure mechanism of sandwich beam with an implanted through‐width rectangle face/core debond was presented .The re‐sponse of the specimens show that main failure mode was mixed buckling , and the load bearing process could be divided into axial compression ,local buckling ,mixed buckling and collapse failure stages .Based on the experimental results ,a finite element model was established to simulate the ca‐pability of load bearing and post‐buckling behaviors of composite sandwich beams by the nonlinear RIKS algorithm .The implanted through‐width rectangle face/core debond was simulated by cohesive elements .Comparisons of experimental and numerical ultimate loads assoicated with failure modes showed a good agreement .The error was 6 .51% which proved the model was accurate .The error was 6 .51% ,which proved the reliability of the model .The study results show that with the increase

  16. Anti-sandwich structure lead-based composite porous anode for zinc electrowinning%锌电积用"反三明治"结构铅基复合多孔阳极

    Institute of Scientific and Technical Information of China (English)

    蒋良兴; 吕晓军; 李渊; 彭红建; 赖延清; 李劼; 刘业翔

    2011-01-01

    In order to improve the electric conductivity and mechanical performance of lead-based porous anode (PA) for zinc electrowinning, an anti-sandwich structure composite porous anode (CPA) was prepared by counter-gravity infiltration and its structure was optimized. The results show that under the optimized infiltration conditions, the core metal and foam outside can integrate together. The pore diameter and thickness of foam have influence on the anodic potential, and the optimum values of them are 1.25-1.43 mm and 3 mm, respectively. The pore size and thickness of foam outside have negligible effect on tensile strength, but the thickness of core metal has great effect on it. The thickness of core metal is 2 mm, the tensile strength of composite porous anode is about 9.3 MPa, which is about 3 times of that of PA. And the electric conductivity of composite porous anode is 1.3 times of that of PA.%为了改进锌电积用铅基多孔阳极的导电率及机械性能,采用反重力渗流技术制备了一种"反三明治"结构复合多孔阳极,并对其结构进行优化.研究结果表明:在优化的铸造条件下,中间加强金属板与外层泡沫结合为一个整体;外层泡沫的孔径和厚度对阳极电位有影响,在孔径为1.25~1.43 mm,厚度为3 mm时,阳极电位达到最优值;外层泡沫的孔径和厚度对抗拉强度的影响基本可以忽略,但中间加强金属板的厚度对其影响很大;当中间加强金属板的厚度2mm为时,复合多孔阳极的抗拉强度达9.3 MPa,是多孔阳极的抗拉强度3倍;优化结构后,复合多孔阳极的导电率为多孔阳极的1.3倍.

  17. Radiation-induced intracranial malignant fibrous histiocytoma

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Vitale, J.C.; Slavin, R.E.; McQueen, J.D.

    1976-06-01

    An autopsy case of radiation-induced intracranial malignant fibrous histiocytoma (fibroxanthosarcoma) is reported. The tumor developed in the region of the sella turcica 11 years after high dose radiotherapy of a chromophobe adenoma of the pituitary. The tumor had infiltrated the base of the brain as well as the base of the skull. Metastases were not found. The tumor was composed of an admixture of bizarre fibroblasts, histiocytes and giant cells, xanthoma cells and siderophages, with a storiform fibrous stroma. This appears to be the first documented instance of a malignant fibrous histiocytoma occurring intracranially after local x irradiation.

  18. The "pirate sign" in fibrous dysplasia.

    Science.gov (United States)

    Singnurkar, Amit; Rush, Chris

    2006-11-01

    Fibrous dysplasia commonly involves the skull in both its monostotic and polyostotic variants. We present two cases of fibrous dysplasia involving the sphenoid wing, which were strikingly similar in their bone scan appearance. Both patients demonstrated intense increased uptake of Tc-99m MDP in a pattern reminding us of a "pirate wearing an eyepatch." We propose that this characteristic appearance of fibrous dysplasia of the sphenoid wing be called the "pirate sign." A review of the literature revealed several other pathologic conditions that have been reported to involve the sphenoid bone and should be considered in the differential diagnosis of abnormal bone tracer uptake in this region.

  19. Fibrous tissues growth and remodeling: Evolutionary micro-mechanical theory

    Science.gov (United States)

    Lanir, Yoram

    2017-10-01

    Living fibrous tissues are composite materials having the unique ability to adapt their size, shape, structure and mechanical properties in response to external loading. This adaptation, termed growth and remodeling (G&R), occurs throughout life and is achieved via cell-induced turnover of tissue constituents where some are degraded and new ones are produced. Realistic mathematical modeling of G&R provides insight into the basic processes, allows for hypotheses testing, and constitutes an essential tool for establishing clinical thresholds of pathological remodeling and for the production of tissue substitutes aimed to achieve target structure and properties. In this study, a general 3D micro-mechanical multi-scale theory of G&R in fibrous tissue was developed which connects between the evolution of the tissue structure and properties, and the underlying mechano-biological turnover events of its constituents. This structural approach circumvents a fundamental obstacle in modeling growth mechanics since the growth motion is not bijective. The model was realized for a flat tissue under two biaxial external loadings using data-based parameter values. The predictions show close similarity to characteristics of remodeled adult tissue including its structure, anisotropic and non-linear mechanical properties, and the onset of in situ pre-strain and pre-stress. The results suggest that these important features of living fibrous tissues evolve as they grow.

  20. Erosive separation of organic coatings from fibrous substrates.

    Science.gov (United States)

    Weiss, M; Momber, A W

    2004-11-01

    The separation of organic coatings from fibrous substrates is a key problem in recycling processes. This problem applies to carpets, technical textiles and automotive interior components. This paper reports about results of laboratory studies involving the application of high-speed liquid jets to solve this problem. Results from high-speed video images are used to qualify the principal erosion process. It is shown that the coating material is first ground by the jet; the generated erosion debris is then pushed through the permeable fibrous fabric of the substrate. It is also found that threshold conditions exist for the coating grinding process and for the debris transportation. These threshold conditions depend on target composition and process parameters. A phenomenological separation model is introduced. The influence of key process parameters, namely jet velocity, exposure time, stand-off distance and impact angle, is also investigated. It is found that high-speed liquid jets are suitable tools for separating organic coatings completely and selectively from fibrous substrates. Recommendations on how to optimise the erosion process are derived from the results.

  1. Atypical Cutaneous Fibrous Histiocytoma: An Unusual and Misleading Variant of Fibrous Histiocytoma

    OpenAIRE

    Soumaya Ben Abdelkrim; Colondane Belajouza; Wafa Jomaa; Nadia Beizig; Zeineb Ben Said; Moncef Mokni; Rafia Nouira; Badreddine Sriha

    2011-01-01

    Atypical fibrous histiocytoma is a distinctive variant of cutaneous fibrous histiocytoma, which is often mistaken histologically for sarcoma and which have a tendency to recur locally and a capacity to metastasize, although very rarely. We report a new case of atypical cutaneous fibrous histiocytoma in a 31-year-old man who presented with a recurrent polypoid nodule on the abdominal wall. The diagnosis was made on the basis of morphological and immunohistochemical findings. We discuss through...

  2. Solitary Fibrous Tumor of the Uterus

    Directory of Open Access Journals (Sweden)

    Po-Wei Chu

    2006-12-01

    Conclusion: The behavior of solitary fibrous tumors arising from the uterus is difficult to evaluate; therefore, complete surgical excision featuring clear margins and comprehensive follow-up is recommended.

  3. An Optimum Analysis Method of Sandwich Structures Made from Elastic-viscoelastic Materials

    Institute of Scientific and Technical Information of China (English)

    CHEN Ying-bo; XIA Yu; REN Zhi-gang; LU Zhe-an; WANG Er-lei

    2004-01-01

    Due to a viscoelastic damping middle layer,sandwich structures have the capacity of energy consumption.In this paper,we describe the frequency-dependent property of viscoelastic materials using complex modulus model,and iterative modal strain energy method and iterative complex eigenvalue method are presented to obtain frequency and loss factor of sandwich structures.The two methods are effective and exact for the large-scale complex composite sandwich structures.Then an optimum analysis method is suggested to apply to sandwich structures.Finally,as an example,an optimum analysis of a clamped-clamped sandwich beams is conducted,theoretical closed-form solution and numerical predictions are studied comparatively,and the results agree well.

  4. Structural Behaviour of Precast Lightweight Foamed Concrete Sandwich Panel under Axial Load: An Overview

    Directory of Open Access Journals (Sweden)

    Suryani Samsudin

    2013-02-01

    Full Text Available The development of precast sandwich concrete has gained acceptance worldwide in conjunction with the Industrial Building System (IBS.  The advancement and improvement of using wall panel has gone through a lot of achievements through the last decade. The usage of precast lightweight sandwich panel has become the alternative to conventional construction using brick wall. The usage of this panel system contributes to a sustainable and environmental friendly construction.  This paper presents an overview of the latest development in precast concrete sandwich panel as an IBS. The purpose of this paper is to provide comprehensive information on latest research development of sandwich panel for building construction purposes. The information on sandwich panel’s composition, material, properties, strength, availability, and its usage as structural element are reported.  An innovative concept used in the design of these systems and the use of lightweight materials is also discussed.

  5. [Solitary fibrous tumours of the kidney].

    Science.gov (United States)

    Gres, Pascal; Avances, Christophe; Ben Naoum, Kamel; Chapuis, Héliette; Costa, Pierre

    2004-02-01

    Solitary fibrous tumours (SFT) are mesenchymal tumours that usually arise from the pleura. Renal SFT are exceptional (9 cases reported in the literature). The authors report a new case discovered during assessment of HT and treated by radical right nephrectomy. The histological appearance is characteristic: a tumour with a fibrous centre, composed of a monomorphic proliferation of spindle cells, with positive CD 34, CD 99, and bcl 2 labelling. The prognosis after complete resection is generally favourable.

  6. Fibrous dysplasia of bone causing unilateral proptosis

    Directory of Open Access Journals (Sweden)

    Reshma Ramakrishnan

    2015-01-01

    Full Text Available Fibrous dysplasia (FD is a slow growing benign noninherited disorder in which normal bones are replaced by fibrous tissue and immature woven bones. Here we report a case of 30-year-old female who presented with unilateral proptosis and lagophthalmos without any visual loss; was diagnosed with polyostotic FD. Patient was taken up for surgery. Osseous reconturing was done by shaving of involved facial bones. Postoperatively, there was a decrease in proptosis and lagophthalmos.

  7. Fibrous dysplasia of bone: a clinicopathologic review

    Directory of Open Access Journals (Sweden)

    Mohan H

    2011-11-01

    Full Text Available Harsh Mohan1, Preeti Mittal1, Irneet Mundi1, Sudhir Kumar21Department of Pathology, 2Department of Orthopedics, Government Medical College, Sector 32, Chandigarh, IndiaAbstract: Fibrous dysplasia of the bones is an uncommon congenital skeletal disorder that is found equally in both genders and is not inherited. Its etiology has been linked to an activating mutation of Gsα and the downstream effects of the resultant increase in cAMP. Fibrous dysplasia is categorized as either monostotic or polyostotic, and may occur as a component of McCune-Albright syndrome or the rare Mazabraud syndrome. Long bones, skull bones, and ribs are the most commonly affected bones. The radiological picture is somewhat variable, including a ground-glass appearance, expansion of the bone, and sclerosis surrounding the lesion. Histologically, fibrous dysplasia shows irregularly-shaped trabeculae of immature, woven bone in a background of variably cellular, loosely arranged fibrous stroma. It may be complicated by pathologic fracture, and rarely by malignant transformation. This review examines interesting issues surrounding the etiology of fibrous dysplasia, its clinical and laboratory manifestations, radiological picture, utility of bone biopsy, gross and microscopic pathology, complications, and its differential diagnostic considerations.Keywords: fibrous dysplasia, McCune-Albright syndrome, monostotic form, polyostotic form

  8. Technology sandwich panels with mineral wool insulation

    OpenAIRE

    Tyulenev M.; Burtzeva M.; Mednikova E.

    2016-01-01

    Sandwich panel — self–supporting structure consisting of metal cladding and thermal insulation core. As a heat–insulating core used mineral wool, foamed plastics. Production of sandwich panels with insulation mineral wool performed on modular lines for the production of aggregate or conveyer scheme. Sandwich panels are used as load–bearing elements of the facades, as well as a roof covering.

  9. Bending and Deformation of Sandwich Panels Due to Localized Pressure

    Directory of Open Access Journals (Sweden)

    Bambang K. Hadi

    2005-05-01

    Full Text Available Bending and deformation of sandwich panels due to localized pressure were analyzed using both Rayleigh-Ritz and finite element methods. The faces were made of laminated composite plates, while the core was a honeycomb material. Carbon fiber and glass fiber reinforced plastics were used for composite plate faces. In the case of Rayleigh-Ritz method, first the total energy of the system was calculated and then taking the variations of the total energy, the sandwich panel deflections could be computed. The deflections were assumed by means of Fourier series. A finite element code NASTRAN was exploited extensively in the finite element method. 3-dimensional 8-node brick elements were used to model sandwich panels, for both the faces sheets and the core. The results were then compared to each other and in general they are in good agreements. Dimple phenomena were found in these cases. It shows that localized pressure on sandwich structures will produce dimple on the pressurize region with little effects on the rest of the structures.

  10. Wire and Packing Tape Sandwiches

    Science.gov (United States)

    Rabinowitz, Sandy

    2009-01-01

    In this article, the author describes how students can combine craft wire with clear packing tape to create a two-dimensional design that can be bent and twisted to create a three-dimensional form. Students sandwich wire designs between two layers of tape. (Contains 1 online resource.)

  11. Thermal-Diode Sandwich Panel

    Science.gov (United States)

    Basiulis, A.

    1986-01-01

    Thermal diode sandwich panel transfers heat in one direction, but when heat load reversed, switches off and acts as thermal insulator. Proposed to control temperature in spacecraft and in supersonic missiles to protect internal electronics. In combination with conventional heat pipes, used in solar panels and other heat-sensitive systems.

  12. Composites

    Science.gov (United States)

    Taylor, John G.

    The Composites market is arguably the most challenging and profitable market for phenolic resins aside from electronics. The variety of products and processes encountered creates the challenges, and the demand for high performance in critical operations brings value. Phenolic composite materials are rendered into a wide range of components to supply a diverse and fragmented commercial base that includes customers in aerospace (Space Shuttle), aircraft (interiors and brakes), mass transit (interiors), defense (blast protection), marine, mine ducting, off-shore (ducts and grating) and infrastructure (architectural) to name a few. For example, phenolic resin is a critical adhesive in the manufacture of honeycomb sandwich panels. Various solvent and water based resins are described along with resin characteristics and the role of metal ions for enhanced thermal stability of the resin used to coat the honeycomb. Featured new developments include pultrusion of phenolic grating, success in RTM/VARTM fabricated parts, new ballistic developments for military vehicles and high char yield carbon-carbon composites along with many others. Additionally, global regional market resin volumes and sales are presented and compared with other thermosetting resin systems.

  13. Two dimensional dynamic analysis of sandwich plates with gradient foam cores

    Energy Technology Data Exchange (ETDEWEB)

    Mu, Lin; Xiao, Deng Bao; Zhao, Guiping [State Key Laboratory for Mechanical structure Strength and Vibration, School of AerospaceXi' an Jiaotong University, Xi' an (China); Cho, Chong Du [Dept. of Mechanical Engineering, Inha University, Inchon (Korea, Republic of)

    2016-09-15

    Present investigation is concerned about dynamic response of composite sandwich plates with the functionally gradient foam cores under time-dependent impulse. The analysis is based on a model of the gradient sandwich plate, in which the face sheets and the core adopt the Kirchhoff theory and a [2, 1]-order theory, respectively. The material properties of the gradient foam core vary continuously along the thickness direction. The gradient plate model is validated with the finite element code ABAQUS®. And the results show that the proposed model can predict well the free vibration of composite sandwich plates with gradient foam cores. The influences of gradient foam cores on the natural frequency, deflection and energy absorbing of the sandwich plates are also investigated.

  14. Properties of a new energy-saving and load-bearing sandwich composite wall material without connecting pieces%一种无拉接件的节能承重型夹芯复合墙材的性能

    Institute of Scientific and Technical Information of China (English)

    殷素红; 周小华; 李从波; 文梓芸

    2012-01-01

    研制了一种在两等厚的全轻轻集料混凝土中间浇注泡沫保温砂浆的无拉接件节能承重型夹芯复合墙材,对不同保温层厚度、不同物理嵌合方式的夹芯复合墙材的抗压强度、劈裂抗拉强度和热工性能进行研究.结果表明,设计墙材厚度为150 mm时,虽然影响复合墙材抗压强度和劈裂抗拉强度的因素有所不同,但当保温层厚度为40~50 mm,采用单齿结构复合方式,齿形宽度为50~60 mm时,复合墙材的抗压强度和劈裂抗拉强度较高,分别可达8.0、1.2 MPa,满足MU7.5强度等级墙体材料的要求;同时墙材的传热系数K约为1.3 W/(m2·K),热惰性指标D约为4.15,满足夏热冬暖地区居住建筑节能50%的要求.%A new energy-saving and load-bearing sandwich composite wall material without connecting pieces was developed, which was manufactured by pouring foam mortar into the space between two lightweight aggregate concrete. The compression strength, splitting tensile strength and thermal performance of this wall material with different insulation thickness and different composite forms were studied in this paper. Results show that, when the thickness of the wall material is 150 mm, the insulation thickness is 40-50 mm, the tooth width of single tooth structure composite form is 50-60 mm, the compression strength and splitting tensile strength of the wall material are high, respectively reaching 8.0 MPa and 1.2 MPa, and meet the requirement of MU7.5 strength grade. Simultaneity, the heat transfer coefficient K of the wall material is about 1.3 W/(m2·K) and the thermal inertia index D is about 4.15, which meet the thermal design requirements of 50% energy-saving of exterior wall used for residential building in hot summer and warm winter area.

  15. Flexural Behavior of Aluminum Honeycomb Core Sandwich Structure

    Science.gov (United States)

    Matta, Vidyasagar; Kumar, J. Suresh; Venkataraviteja, Duddu; Reddy, Guggulla Bharath Kumar

    2017-05-01

    This project is concerned with the fabrication and flexural testing of aluminium honey comb sandwich structure which is a special case of composite materials that is fabricated by attaching two thin but stiff skins to a light weight but thick core. The core material is normally low density material but its high thickness provide the sandwich composite with high bonding stiffness. Honeycomb core are classified into two types based on the materials and structures. Hexagonal shape has a unique properties i.e has more bonding strength and less formation time based on the cell size and sheet thickness. Sandwich structure exhibit different properties such as high load bearing capacity at low weight and has excellent thermal insulation. By considering the above properties it has tendency to minimize the structural problem. So honey comb sandwich structure is choosed. The core structure has a different applications such as aircraft, ship interiors, construction industries. As there is no proper research on strength characteristics of sandwich structure. So, we use light weight material to desire the strength. There are different parameters involved in this structure i.e cell size, sheet thickness and core height. In this project we considered 3 level of comparison among the 3 different parameters cell size of 4, 6 and 8 mm, sheet thickness of 0.3, 0.5 and 0.7 mm, and core height of 20,25 and 30 mm. In order to reduce the number of experiment we use taguchi design of experiment, and we select the L8 orthogonal array is the best array for this type of situation, which clearly identifies the parameters by independent of material weight to support this we add the minitab software, to identify the main effective plots and regression equation which involves the individual response and corresponding parameters. Aluminium material is used for the fabrication of Honeycomb sandwich structure among the various grades of aluminium we consider the AL6061 which is light weight material

  16. Mechanical Behavior of CFRP Lattice Core Sandwich Bolted Corner Joints

    Science.gov (United States)

    Zhu, Xiaolei; Liu, Yang; Wang, Yana; Lu, Xiaofeng; Zhu, Lingxue

    2017-02-01

    The lattice core sandwich structures have drawn more attention for the integration of load capacity and multifunctional applications. However, the connection of carbon fibers reinforced polymer composite (CFRP) lattice core sandwich structure hinders its application. In this paper, a typical connection of two lattice core sandwich panels, named as corner joint or L-joint, was investigated by experiment and finite element method (FEM). The mechanical behavior and failure mode of the corner joints were discussed. The results showed that the main deformation pattern and failure mode of the lattice core sandwich bolted corner joints structure were the deformation of metal connector and indentation of the face sheet in the bolt holes. The metal connectors played an important role in bolted corner joints structure. In order to save the calculation resource, a continuum model of pyramid lattice core was used to replace the exact structure. The computation results were consistent with experiment, and the maximum error was 19%. The FEM demonstrated the deflection process of the bolted corner joints structure visually. So the simplified FEM can be used for further analysis of the bolted corner joints structure in engineering.

  17. Damage Tolerance of Sandwich Plates With Debonded Face Sheets

    Science.gov (United States)

    Sankar, Bhavani V.

    2001-01-01

    A nonlinear finite element analysis was performed to simulate axial compression of sandwich beams with debonded face sheets. The load - end-shortening diagrams were generated for a variety of specimens used in a previous experimental study. The energy release rate at the crack tip was computed using the J-integral, and plotted as a function of the load. A detailed stress analysis was performed and the critical stresses in the face sheet and the core were computed. The core was also modeled as an isotropic elastic-perfectly plastic material and a nonlinear post buckling analysis was performed. A Graeco-Latin factorial plan was used to study the effects of debond length, face sheet and core thicknesses, and core density on the load carrying capacity of the sandwich composite. It has been found that a linear buckling analysis is inadequate in determining the maximum load a debonded sandwich beam can carry. A nonlinear post-buckling analysis combined with an elastoplastic model of the core is required to predict the compression behavior of debonded sandwich beams.

  18. Polyisocyanurate systems for insulating and sandwich elements; Polyisocyanurat-Systeme fuer Daemm- und Sandwichelemente

    Energy Technology Data Exchange (ETDEWEB)

    Malotki, P. von [Elastogran GmbH, Lemfoerde (Germany)

    2000-07-01

    PUR rigid foam plates are laminated with flexible Al films, paper or glass non-wovens, or may be processed into sandwich elements with metallic top-layers via coil-coating. Dependence of heat insulation efficiency, dimensional stability and fire behavior of the foam on chemical composition and the blowing agents is considered and compared with polyisocyanurate foams. Recipes for the production of PIR heat insulation elements and sandwich elements are given.

  19. Multiscale Modeling Methods for Analysis of Failure Modes in Foldcore Sandwich Panels

    Science.gov (United States)

    Sturm, R.; Schatrow, P.; Klett, Y.

    2015-12-01

    The paper presents an homogenised core model suitable for use in the analysis of fuselage sandwich panels with folded composite cores under combined loading conditions. Within a multiscale numerical design process a failure criterion was derived for describing the macroscopic behaviour of folded cores under combined loading using a detailed foldcore micromodel. The multiscale modelling method was validated by simulation of combined compression/bending failure of foldcore sandwich panels.

  20. Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation

    OpenAIRE

    Tumino, D; T. Ingrassia; V. Nigrelli; G. Pitarresi; V. Urso Miano

    2014-01-01

    In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP) orthotropic material for both the two external skins and the inner core web. In particular, the core is designed in order to cooperate with the GRP skins in membrane and flexural properties by means of the addition of a corrugated laminate into the foam core. An analytical model has been developed to replace a unit cell of this s...

  1. Fibrous Dysplasia Characterization Using Lacunarity Analysis.

    Science.gov (United States)

    Cordeiro, Mirna S; Backes, André R; Júnior, Antônio F Durighetto; Gonçalves, Elmar H G; de Oliveira, Jefferson X

    2016-02-01

    Fibrous dysplasia (FD) is a developmental anomaly in which the normal medullary space of the affected bone is replaced by fibro-osseous tissue. This condition is typically encountered in adolescents and young adults. It affects the maxillofacial region and it can often cause severe deformity and asymmetry. Therefore, accurate diagnosis is critical to determine the appropriate treatment of each case. In this sense, computed tomography (CT) is a relevant resource among the imaging techniques for correct diagnosis of this condition. Thus, in this paper, we propose to analyze fibrous dysplasia through its texture pattern. To accomplish this task, we propose to use lacunarity analysis, a multiscale method for describing patterns of spatial dispersion. Results indicated lower lacunarity values for fibrous dysplasia in comparison to normal bone samples, an indication that their texture images are more homogeneous, and a high separability between the classes when using principal component analysis (PCA) and decision trees for statistical analysis.

  2. Congenital fibrous hamartoma of the knee

    Energy Technology Data Exchange (ETDEWEB)

    Arioni, Cesare; Bellini, Carlo; Risso, Francesco Maria; Scopesi, Fabio; Serra, Giovanni [University of Genoa, Neonatal Pathology Service, Department of Paediatrics, Institute G. Gaslini, Genoa (Italy); Oddone, Mauro; Toma, Paolo [Institute G. Gaslini, Radiology Service, Genoa (Italy); Nozza, Paolo [Institute G. Gaslini, U. O. di Anatomia Patologica, Genoa (Italy)

    2006-05-15

    A full-term male infant presented at birth with a hard swelling of the left knee. The lemon-sized lesion was fixed to the underlying knee muscles, while the overlying skin was stretched and shiny; there was no bruit. Radiography, sonography and MRI suggested a soft-tissue tumour. After surgical excision, histology showed the presence of fibrous and mesenchymal tissue, with mature adipose tissue. Fibrous hamartoma of infancy was diagnosed. Among soft-tissue tumours, fibrous hamartoma of infancy is a rare and benign lesion, occurring in the first 2 years of life. The tumour mainly affects the trunk, axilla, and upper extremities. This infant had unique involvement of the knee. The treatment of choice is local excision. (orig.)

  3. Malignant fibrous histiocytoma with skeletal involvement

    Directory of Open Access Journals (Sweden)

    Takechi,Hideo

    1978-10-01

    Full Text Available Malignant fibrous histiocytoma of soft part is rather common but malignant fibrous histiocytoma of the bone is rarely encountered clinically. Authors present five cases of malignant fibrous histiocytoma with skeletal involvement and discuss their clinical course, x-ray findings and histological features. This tumor has marked tendency for local recurrence and metastasis. Other bone tumors such as giant cell tumor, aneurysmal bone cyst, non ossifying fibroma, osteosarcoma, fibrosarcoma of bone and metastatic cancer can be excluded by several characteristic findings observed in x-rays as well as histopathological features. All information on the patient should be carefully analysed, because it is difficult to decide whether bone involvement is primary or secondary. Four out of five cases definitely originated within the bone.

  4. The effects of composting on the nutritional composition of fibrous bio-regenerative life support systems (BLSS) plant waste residues and its impact on the growth of Nile tilapia ( Oreochromis niloticus)

    Science.gov (United States)

    Gonzales, John M.; Lowry, Brett A.; Brown, Paul B.; Beyl, Caula A.; Nyochemberg, Leopold

    2009-04-01

    Utilization of bio-regenerative life support systems (BLSS) plant waste residues as a nutritional source by Nile tilapia ( Oreochromis niloticus) has proven problematic as a result of high concentrations of fibrous compounds in the plant waste residues. Nutritional improvement of plant waste residues by composting with the oyster mushroom ( Pleurotus ostreatus), and the effects on growth and nutrient utilization of Nile tilapia fed such residues were evaluated. Five Nile tilapia (mean weight = 70.9 ± 3.1 g) were stocked in triplicate aquaria and fed one of two experimental diets, cowpea (CP) and composted cowpea (CCP), twice daily for a period of 8 weeks. Composting of cowpea residue resulted in reduced concentrations of nitrogen-free extract, hemi-cellulose and trypsin inhibitor activity, though trypsin inhibitor activity remained high. Composting did not reduce crude fiber, lignin, or cellulose concentrations in the diet. No significant differences ( P ostreatus is not a suitable candidate for culture in conjunction with the culture of Nile tilapia. Additional work is needed to determine what, if any, benefit can be obtained from incorporating composted residue as feed for Nile tilapia.

  5. Fibrous Protein Structures: Hierarchy, History and Heroes.

    Science.gov (United States)

    Squire, John M; Parry, David A D

    2017-01-01

    During the 1930s and 1940s the technique of X-ray diffraction was applied widely by William Astbury and his colleagues to a number of naturally-occurring fibrous materials. On the basis of the diffraction patterns obtained, he observed that the structure of each of the fibres was dominated by one of a small number of different types of molecular conformation. One group of fibres, known as the k-m-e-f group of proteins (keratin - myosin - epidermin - fibrinogen), gave rise to diffraction characteristics that became known as the α-pattern. Others, such as those from a number of silks, gave rise to a different pattern - the β-pattern, while connective tissues yielded a third unique set of diffraction characteristics. At the time of Astbury's work, the structures of these materials were unknown, though the spacings of the main X-ray reflections gave an idea of the axial repeats and the lateral packing distances. In a breakthrough in the early 1950s, the basic structures of all of these fibrous proteins were determined. It was found that the long protein chains, composed of strings of amino acids, could be folded up in a systematic manner to generate a limited number of structures that were consistent with the X-ray data. The most important of these were known as the α-helix, the β-sheet, and the collagen triple helix. These studies provided information about the basic building blocks of all proteins, both fibrous and globular. They did not, however, provide detailed information about how these molecules packed together in three-dimensions to generate the fibres found in vivo. A number of possible packing arrangements were subsequently deduced from the X-ray diffraction and other data, but it is only in the last few years, through the continued improvements of electron microscopy, that the packing details within some fibrous proteins can now be seen directly. Here we outline briefly some of the milestones in fibrous protein structure determination, the role of the

  6. A case of intracranial malignant fibrous histiocytoma

    Directory of Open Access Journals (Sweden)

    Amir Hossein Sarrami

    2011-01-01

    Full Text Available We describe a case of intracranial malignant fibrous histiocytoma which had infiltrated pons, cerebellum and basal surface of left temporal lobe without any visible mass. The patient presented with a sudden loss of consciousness and vomiting. Clinical findings, laboratory tests, imaging and examination of the cerebrospinal fluid tended to establish the diagnosis of an infectious condition than a malignancy. Without any response to the antibiotics and with a progressive deterioration of neurologic and mental condition, the patient died after 20 days. In the autopsy, histological and immunohistochemical study of the brain revealed the diagnosis of malignant fibrous histiocytoma (MFH.

  7. Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations Under Flexure Loads

    Science.gov (United States)

    Nordendale, Nikolas A.; Goyal, Vinay K.; Lundgren, Eric C.; Patel, Dhruv N.; Farrokh, Babak; Jones, Justin; Fischetti, Grace; Segal, Kenneth N.

    2015-01-01

    An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and face-sheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

  8. Atypical cutaneous fibrous histiocytoma: an unusual and misleading variant of fibrous histiocytoma.

    Science.gov (United States)

    Ben Abdelkrim, Soumaya; Belajouza, Colondane; Jomaa, Wafa; Beizig, Nadia; Ben Said, Zeineb; Mokni, Moncef; Nouira, Rafia; Sriha, Badreddine

    2011-01-01

    Atypical fibrous histiocytoma is a distinctive variant of cutaneous fibrous histiocytoma, which is often mistaken histologically for sarcoma and which have a tendency to recur locally and a capacity to metastasize, although very rarely. We report a new case of atypical cutaneous fibrous histiocytoma in a 31-year-old man who presented with a recurrent polypoid nodule on the abdominal wall. The diagnosis was made on the basis of morphological and immunohistochemical findings. We discuss through this case and a review of the literature pathological and evolutive features and diagnostic difficulties of this entity.

  9. Atypical Cutaneous Fibrous Histiocytoma: An Unusual and Misleading Variant of Fibrous Histiocytoma

    Directory of Open Access Journals (Sweden)

    Soumaya Ben Abdelkrim

    2011-01-01

    Full Text Available Atypical fibrous histiocytoma is a distinctive variant of cutaneous fibrous histiocytoma, which is often mistaken histologically for sarcoma and which have a tendency to recur locally and a capacity to metastasize, although very rarely. We report a new case of atypical cutaneous fibrous histiocytoma in a 31-year-old man who presented with a recurrent polypoid nodule on the abdominal wall. The diagnosis was made on the basis of morphological and immunohistochemical findings. We discuss through this case and a review of the literature pathological and evolutive features and diagnostic difficulties of this entity.

  10. 钢筋混凝土双向密肋夹芯保温叠合板研究%Research on reinforced concrete dense-rib sandwich insulation composite panels

    Institute of Scientific and Technical Information of China (English)

    洪云希; 刘学武; 唐义军; 关凤林

    2011-01-01

    Reinforced concrete two-way dense-rib sandwich insulation panel is composed of precast pre-stressed concrete floor, insulation sandwich and cast-in-situ concrete surface layer. The stress state of pre-stresded concrete floor board in the construction phase and use phase was analyzed. Design method of reinforced concrete two-way dense-rib sandwich insulation panels was proposed. The proposed requirements of construction technology and quality inspection of this kind of element were suggested.%钢筋混凝土双向密肋夹芯保温叠合板由预制预应力混凝土底板、保温隔热夹芯和现浇混凝土面层组成.分析了预应力混凝土底板在施工阶段和使用阶段的受力状态,提出了钢筋混凝土双向密肋夹芯保温叠合板的设计计算方法,并对其施工工艺及质量检验提出了要求.

  11. Clinicopathologic characteristics of fibrous mass-forming chronic pancreatitis

    Institute of Scientific and Technical Information of China (English)

    常雪姣

    2013-01-01

    Objective To investigate clinicopathological features of fibrous mass-forming chronic pancreatitis (FMCP) ,to compare clinicopathological and immunohistochemical characteristics between autoimmune pancreatitis (AIP) and fibrous mass-forming non-autoimmune pancreatitis

  12. Cervical spinal monostotic fibrous dysplasia: A case report

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ok Hwa [Dept. of Radiology, Haeundae Paik Hospital, Inje University College of Medicine, Busan (Korea, Republic of)

    2013-09-15

    Monostotic fibrous dysplasia of the cervical vertebra is quite unusual. The author reports a case of monostotic fibrous dysplasia affecting the second cervical vertebra with descriptions from the CT, MR and bone scanning findings.

  13. Optic nerve decompression for orbitofrontal fibrous dysplasia.

    Science.gov (United States)

    Abe, Takumi; Sato, Kaneshige; Otsuka, Takaharu; Kawamura, Noriyoshi; Shimazu, Motohiko; Izumiyama, Hitoshi; Matsumoto, Kiyoshi

    2002-08-01

    Orbitofrontal fibrous dysplasia often involves the bony orbit and the optic canal. Although fibrous dysplasia reportedly produces compression of the optic nerve leading to visual distrubances, optic nerve decompression in patients without clinical signs of optic neuropathy is still controversial. We describe two patients with orbitofrontal fibrous dysplasia without signs of visual disturbance and one patient with McCune-Albright syndrome and progressive visual impairment. Optic nerve decompression was performed prophylactically for two patients and therapeutically for one patient through the transcranial extradural route. Dystopias and craniofacial deformities induced by fibrous dysplasia also were corrected. The micropressure suction-irrigation system was especially effective for decreasing heat transfer and thereby preventing thermal injury of the optic nerve. The orbitofrontal area was reconstructed from cranial bone, iliac bone, and ribs. Postoperative follow-up revealed no disturbances in visual function and no evidence of cerebrospinal fluid leakage. These findings suggest that optic nerve decompression may be effective in preventing visual disturbances with minimal risk of other neurological sequelae. Subsequent orbital reconstruction yielded satisfactory cosmetic results.

  14. Prophylactic intramedullary nailing in monostotic fibrous dysplasia.

    Science.gov (United States)

    Demiralp, Bahtiyar; Ozturk, Cagatay; Ozturan, Kutay; Sanisoglu, Yavuz S; Cicek, Ilker E; Erler, Kaan

    2008-06-01

    Fibrous dysplasia of bone is an enigma with no known cure. Treatment currently consists of curettage and bone-grafting in an attempt to eradicate the lesion and to prevent progressive deformity. This study presents the results of prophylactic intramedullary nailing in 10 patients with monostotic fibrous dysplasia, pain increasing with movement, and scintigraphically established activity. Ten patients with monostotic fibrous dysplasia in their upper or lower extremities treated between 2001 and 2003 were included in the study. Seven patients were male and 3 were female; their mean age was 26.9 years. The mean duration of follow-up was 33.5 months. Closed intramedullary nail without reaming was used in all cases. Bone grafting was not performed. Patients were allowed full weight bearing on the affected extremities on the second postoperative day. Mean VAS for functional pain was 5.33 +/- 0.65 preoperatively and 2.26 +/- 0.57 at final follow-up (p < 0.05). Radiographs showed no changes in lesion size, and the intramedullary fixation appeared to be stable. Prophylactic intramedullary nailing appeared to be beneficial in monostotic fibrous dysplasia with scintigraphically proven activity and functional pain. It also avoids problems that may occur following pathological fracture.

  15. Giant solitary fibrous tumour of the liver

    NARCIS (Netherlands)

    T. Terkivatan (Türkan); M. Kliffen (Mike); J.H.W. de Wilt (Johannes); A.N. van Geel (Albert); A.M.M. Eggermont (Alexander); C. Verhoef (Kees)

    2006-01-01

    textabstractBackground: Solitary fibrous tumour (SFT) is an uncommon mesenchymal neoplasm that most frequently affects the pleura, although it has been reported with increasing frequency in various other sites such as in the peritoneum, pericardium and in non-serosal sites such as lung parenchyma,

  16. Craniofacial fibrous dysplasia: A 10-case series.

    Science.gov (United States)

    Couturier, A; Aumaître, O; Gilain, L; Jean, B; Mom, T; André, M

    2017-09-01

    Fibrous dysplasia of bone is a rare sporadic benign congenital condition in which normal cancellous bone is replaced by fibro-osseous tissue with immature osteogenesis. Sarcomatous transformation is exceptional. Lesions may involve one bone (monostotic) or several (polyostotic). Fibrous dysplasia may be associated with café-au-lait skin macules and endocrinopathy in McCune-Albright syndrome, or with myxoma in Mazabraud's syndrome. We report ten cases of patients followed up for craniofacial fibrous dysplasia in our center between 2010 and 2015. Mean age was 43 years (range, 10-72 years). Clinical symptoms comprised headache (n=3) and sensorineural disorder: recurrent anterior uveitis (n=1), visual acuity loss, epiphora and vestibular syndrome (n=1), and hearing loss (n=1). All cases were monostotic. The sphenoid bone was most commonly involved (n=5), followed by the ethmoid (n=1), frontal (n=1), fronto-ethmoid (n=1), temporal (n=1) and fronto-ethmoido-sphenoid (n=1) bones. Five patients were treated with intravenous pamidronate, a bisphosphonate: evolution was favorable for 3 of them at 1-6 months after treatment initiation, with resolution of headache or vestibular syndrome; the other 2 patients were stable. Two patients were operated on. Diagnosis of craniofacial fibrous dysplasia should be considered in case of headache, neuralgia, sensory disorder, functional disorder or infectious ENT complications. A medico-surgical approach is useful for these patients. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  17. Solitary fibrous tumour of the vagus nerve.

    Science.gov (United States)

    Scholsem, Martin; Scholtes, Felix

    2012-04-01

    We describe the complete removal of a foramen magnum solitary fibrous tumour in a 36-year-old woman. It originated on a caudal vagus nerve rootlet, classically described as the 'cranial' accessory nerve root. This ninth case of immunohistologically confirmed cranial or spinal nerve SFT is the first of the vagus nerve.

  18. Twistable and bendable actuator: a CNT/polymer sandwich structure driven by thermal gradient.

    Science.gov (United States)

    Seo, Dong Kyun; Kang, Tae June; Kim, Dae Weon; Kim, Yong Hyup

    2012-02-24

    We demonstrate a novel configuration of an electrothermal actuator (ETA), which is based on a polydimethylsiloxane (PDMS) slab sandwiched by upper and lower active layers of CNT-PDMS composite. When only one active layer of a single sandwich structure ETA is heated and the other is not, there exists a thermal gradient in the direction of the slab thickness, resulting in bending motion toward the unheated side. Moreover, a dual sandwich structure ETA, consisting of two parallel assembled sandwich structures on the same body, has the unique ability to act with a twisting motion as the two ETAs bend in opposite directions. We expect the advent of the bendable and twistable actuator to break new ground in ETAs.

  19. Stress Distribution on Sandwich Structure with Triangular Grid Cores Suffered from Bending Load

    Directory of Open Access Journals (Sweden)

    Cui Xu

    2015-01-01

    Full Text Available Triangular grid reinforced by carbon fiber/epoxy (CF/EP was designed and manufactured. The sandwich structure was prepared by gluing the core and composite skins. The mechanical properties of the sandwich structure were investigated by the finite element analysis (FEA and three-point bending methods. The calculated bending stiffness and core shear stress were compared to the characteristics of a honeycomb sandwich structure. The results indicated that the triangular core ultimately failed under a bending load of 11000 N; the principal stress concentration was located at the loading region; and the cracks occurred on the interface top skin and triangular core. In addition, the ultimate stress bearing of the sandwich structure was 8828 N. The experimental results showed that the carbon fiber reinforced triangular grid was much stiffer and stronger than the honeycomb structure.

  20. Wave propagation and absorption of sandwich beams containing interior dissipative multi-resonators.

    Science.gov (United States)

    Chen, H; Li, X P; Chen, Y Y; Huang, G L

    2017-04-01

    In this study, a sandwich beam with periodic multiple dissipative resonators in the sandwich core material is investigated for broadband wave mitigation and/or absorption. An analytical approach based on the transfer matrix method and Bloch theorem is developed for both infinite and finite sandwich structures. Wave attenuation constants are theoretically obtained to examine the effects of various system parameters on the position, width and wave attenuation performance of the band gaps. The wave absorption coefficient of the sandwich beam is quantitatively studied to distinguish wave attenuation mechanisms caused by reflection and absorption. It is numerically demonstrated that a transient blast-induced elastic wave with broadband frequencies can be almost completely mitigated or absorbed at a subwavelength scale. The results of this study could be used for developing new multifunctional composite materials to suppress impact-induced and/or blast-induced elastic waves which may cause severe local damage to engineering structures.

  1. Static and Fatigue Characterization of Nomex Honeycomb Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Keskes Boualem

    2013-07-01

    Full Text Available The main benefits of using the sandwich concept in structural components are the high stiffness, good fatigue resistance and low weight ratios. Recent advances in materials and construction techniques have resulted in further improvement and increased uniformity of the sandwich composite properties. In order to use these materials in different applications, the knowledge of simply their static properties alone is not sufficient but additional information on their fatigue properties and durability are required. In this paper, first static and fatigue tests on four points bending of nomex honeycomb composite sandwich panels have been performed. Load/displacement and S-N fatigue curves are presented and analysed. Fatigue failure and damage modes are observed with an optical microscope and are discussed. The second is to address such fatigue behaviour by using a damage model and check it by experimentation. This fatigue damage model is based on stiffness degradation, which is used as a damage indicator. Two non-linear cumulative damage models derived from the chosen stiffness degradation equation are examined with assumption of linear Miner's damage summation. Predicted results are compared with available experimental data.

  2. Static and Fatigue Characterization of Nomex Honeycomb Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Keskes Boualem

    2013-07-01

    Full Text Available The main benefits of using the sandwich concept in structural components are the high stiffness, good fatigue resistance and low weight ratios. Recent advances in materials and construction techniques have resulted in further improvement and increased uniformity of the sandwich composite properties. In order to use these materials in different applications, the knowledge of simply their static properties alone is not sufficient but additional information on their fatigue properties and durability are required. In this paper, first static and fatigue tests on four points bending of nomex honeycomb composite sandwich panels have been performed. Load/displacement and S-N fatigue curves are presented and analysed. Fatigue failure and damage modes are observed with an optical microscope and are discussed. The second is to address such fatigue behaviour by using a damage model and check it by experimentation. This fatigue damage model is based on stiffness degradation, which is used as a damage indicator. Two non-linear cumulative damage models derived from the chosen stiffness degradation equation are examined with assumption of linear Miner's damage summation. Predicted results are compared with available experimental data.

  3. The sandwich-type electrochemiluminescence immunosensor for α-fetoprotein based on enrichment by Fe3O4-Au magnetic nano probes and signal amplification by CdS-Au composite nanoparticles labeled anti-AFP.

    Science.gov (United States)

    Zhou, Hankun; Gan, Ning; Li, Tianhua; Cao, Yuting; Zeng, Saolin; Zheng, Lei; Guo, Zhiyong

    2012-10-09

    A novel and sensitive sandwich-type electrochemiluminescence (ECL) immunosensor was fabricated on a glassy carbon electrode (GCE) for ultra trace levels of α-fetoprotein (AFP) based on sandwich immunoreaction strategy by enrichment using magnetic capture probes and quantum dots coated with Au shell (CdS-Au) as the signal tag. The capture probe was prepared by immobilizing the primary antibody of AFP (Ab1) on the core/shell Fe(3)O(4)-Au nanoparticles, which was first employed to capture AFP antigens to form Fe(3)O(4)-Au/Ab1/AFP complex from the serum after incubation. The product can be separated from the background solution through the magnetic separation. Then the CdS-Au labeled secondary antibody (Ab2) as signal tag (CdS-Au/Ab2) was conjugated successfully with Fe(3)O(4)-Au/Ab1/AFP complex to form a sandwich-type immunocomplex (Fe(3)O(4)-Au/Ab1/AFP/Ab2/CdS-Au), which can be further separated by an external magnetic field and produce ECL signals at a fixed voltage. The signal was proportional to a certain concentration range of AFP for quantification. Thus, an easy-to-use immunosensor with magnetic probes and a quantum dots signal tag was obtained. The immunosensor performed at a level of high sensitivity and a broad concentration range for AFP between 0.0005 and 5.0 ng mL(-1) with a detection limit of 0.2 pg mL(-1). The use of magnetic probes was combined with pre-concentration and separation for trace levels of tumor markers in the serum. Due to the amplification of the signal tag, the immunosensor is highly sensitive, which can offer great promise for rapid, simple, selective and cost-effective detection of effective biomonitoring for clinical application.

  4. Self-healing sandwich structures incorporating an interfacial layer with vascular network

    Science.gov (United States)

    Chen, Chunlin; Peters, Kara; Li, Yulong

    2013-02-01

    A self-healing capability specifically targeted for sandwich composite laminates based on interfacial layers with built-in vascular networks is presented. The self-healing occurs at the facesheet-core interface through an additional interfacial layer to seal facesheet cracks and rebond facesheet-core regions. The efficacy of introducing the self-healing system at the facesheet-core interface is evaluated through four-point bend and edgewise compression testing of representative foam core sandwich composite specimens with impact induced damage. The self-healing interfacial layer partially restored the specific initial stiffness, doubling the residual initial stiffness as compared to the control specimen after the impact event. The restoration of the ultimate specific skin strength was less successful. The results also highlight the critical challenge in self-healing of sandwich composites, which is to rebond facesheets which have separated from the core material.

  5. Standard Terminology of Structural Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This terminology covers terms necessary for a basic uniform understanding and usage of the language peculiar to structural sandwich constructions. The simplest structural sandwich is a three layered construction formed by bonding a thin layer (facing) to each side of a thick layer (core).

  6. Protease-degradable electrospun fibrous hydrogels

    Science.gov (United States)

    Wade, Ryan J.; Bassin, Ethan J.; Rodell, Christopher B.; Burdick, Jason A.

    2015-03-01

    Electrospun nanofibres are promising in biomedical applications to replicate features of the natural extracellular matrix (ECM). However, nearly all electrospun scaffolds are either non-degradable or degrade hydrolytically, whereas natural ECM degrades proteolytically, often through matrix metalloproteinases. Here we synthesize reactive macromers that contain protease-cleavable and fluorescent peptides and are able to form both isotropic hydrogels and electrospun fibrous hydrogels through a photoinitiated polymerization. These biomimetic scaffolds are susceptible to protease-mediated cleavage in vitro in a protease dose-dependent manner and in vivo in a subcutaneous mouse model using transdermal fluorescent imaging to monitor degradation. Importantly, materials containing an alternate and non-protease-cleavable peptide sequence are stable in both in vitro and in vivo settings. To illustrate the specificity in degradation, scaffolds with mixed fibre populations support selective fibre degradation based on individual fibre degradability. Overall, this represents a novel biomimetic approach to generate protease-sensitive fibrous scaffolds for biomedical applications.

  7. Nonlinear mechanics of soft fibrous materials

    CERN Document Server

    Ogden, Raymond

    2015-01-01

    The book presents a state-of-the-art overview of the fundamental theories, established models and ongoing research related to the modeling of these materials. Two approaches are conventionally used to develop constitutive relations for highly deformable fibrous materials. According to the phenomenological approach, a strain energy density function can be defined in terms of strain invariants. The other approach is based on kinetic theories, which treats a fibrous material as a randomly oriented inter-tangled network of long molecular chains bridged by permanent and temporary junctions. At the micro-level, these are associated with chemical crosslinks and active entanglements, respectively. The papers include carefully crafted overviews of the fundamental formulation of the three-dimensional theory from several points of view, and address their equivalences and differences. Also included are solutions to boundary-value problems which are amenable to experimental verification. A further aspect is the elasticity...

  8. First description of Phanerozoic radiaxial fibrous dolomite

    Science.gov (United States)

    Richter, D. K.; Heinrich, F.; Geske, A.; Neuser, R. D.; Gies, H.; Immenhauser, A.

    2014-05-01

    The petrographic analysis and crystallographic analysis of concretionary carbonate cements ("coal balls") from Carboniferous paralic swamp deposits reveal the presence of (length fast) radiaxial fibrous dolomite (RFD), a fabric not previously reported from the Phanerozoic. This finding is of significance as earlier reports of Phanerozoic radiaxial fibrous carbonates are exclusively of calcite mineralogy. Dolomite concretions described here formed beneath marine transgressive intervals within palustrine coal seams. This is of significance as seawater was arguably the main source of Mg2 + ions for dolomite formation. Here, data from optical microscopy, cathodoluminescence, electron backscattered diffraction, X-ray diffraction and geochemical analyses are presented to characterize three paragenetic dolomite phases and one calcite phase in these concretions. The main focus is on the earliest diagenetic, non-stoichiometric (degree of order: 0.41-0.46) phase I, characterized by botryoidal dolomite constructed of fibres up to 110 μm wide with a systematic undulatory extinction and converging crystal axes. Petrographic and crystallographic evidence clearly qualifies phase I dolomite as radiaxial fibrous. Conversely, fascicular optical fabrics were not found. Carbon-isotope ratios (δ13C) are depleted (between - 11.8 and - 22.1‰) as expected for carbonate precipitation from marine pore-fluids in organic-matter-rich, paralic sediment. Oxygen isotope (δ18O) ratios range between - 1.3 and - 6.0‰. The earliest diagenetic nature of these cements is documented by the presence of ubiquitous, non-compacted fossil plant remains encased in phase I dolomite as well as by the complex zoned luminescence patterns in the crystals and is supported by crystallographic and thermodynamic considerations. It is argued that organic matter, and specifically carboxyl groups, reduced thermodynamic barriers for dolomite formation and facilitated Mg/CaCO3 precipitation. The data shown here

  9. High surface area fibrous silica nanoparticles

    KAUST Repository

    Polshettiwar, Vivek

    2014-11-11

    Disclosed are high surface area nanoparticles that have a fibrous morphology. The nanoparticles have a plurality of fibers, wherein each fiber is in contact with one other fiber and each fiber has a length of between about 1 nm and about 5000 nm. Also disclosed are applications of the nanoparticles of the present invention, and methods of fabrication of the nanoparticles of the present invention.

  10. Monostotic fibrous dysplasia with Raynaud's phenomenon.

    Science.gov (United States)

    Kumar, K V S Hari; Aravinda, K; Narayanan, K

    2015-01-01

    Fibrous dysplasia (FD) is a benign bone disorder characterized by alteration in bone morphology. Monostotic FD is the commonest variant and affects the craniofacial bones. Raynaud's phenomenon is recurrent vasospasm of the fingers and toes due to cold exposure. The disease is usually idiopathic or secondary to connective tissue disorders. Raynaud's phenomenon is not described previously with FD. We recently encountered two interesting patients of craniofacial monostotic FD with Raynaud's phenomenon and report the same in this report.

  11. Malignant fibrous histiocytoma of the abdominal wall

    OpenAIRE

    Arif Aslaner; Burhan Mayir; Tuğrul Çakır; Umut Rıza Gündüz; Nurullah Bülbüller

    2015-01-01

    Malignant fibrous histiocytoma (MFH) or undifferentiated pleomorphic sarcoma is a type of malignt neoplasm that arises from any soft tissue and bone involving extremities, abdomen and retroperitoneum. MFH of the external oblique abdominis muscle is rare. Surgical resection of the mass is the treatment of choice depending on the stage of the disease and the invasion depth of the tumor. Radiotherapy, chemotherapy and immunotherapy are the other treatment methods. We present a case of a 71-year ...

  12. Left ventricle remodelling by double-patch sandwich technique

    Directory of Open Access Journals (Sweden)

    Nocchi Andrea

    2007-01-01

    Full Text Available Abstract Background The sandwich double-patch technique was adopted as an alternative method for reconstruction of the left ventricle after excision of postinfarction dysfunctional myocardium to solve technical problems due to the thick edges of the ventricular wall. Methods Over a 5-year period, 12 of 21 patients with postinfarction antero-apical left ventricular aneurysm had thick wall edges after wall excision. It was due to akinetic muscular thick tissue in 6 cases, while in the other 6 with classic fibrous aneurysm, thick edges remained after the cut of the border zone. The ventricular opening was sandwiched between two patches and this is a technique which is currently used for the treatment of the interventricular septum rupture. In our patients the patches are much smaller than the removed aneurysm and they were sutured simply by a single row of single stitches. However, in contrast to interventricular septum rupture where the patches loosen the tension of the tissues, in our patients the patches pull strongly and restrain the walls by fastening their edges and supporting tight stitches. In this way they could narrow the cavity and close the ventricle. Results The resected area varied from 5 × 4 to 8 × 8 cm. Excision was extended into the interventricular septum in 5 patients, thus opening the right ventricle. CABG was performed on all patients but two. Left ventricular volumes and the ejection fraction changed significantly: end-systolic volume 93.5 ± 12.4 to 57.8 ± 8.9 ml, p Conclusion The double-patch sandwich technique (bi-patch closure offers some advantages and does not result in increased morbidity and mortality. In the case of excising a left ventricular aneurysm, this technique in no way requires eversion of the edges, felt strips, buttressed and multiple sutures, all of which are needed for longitudinal linear closure. Moreover, it does not require purse string sutures, endocardial scar remnant to secure the patch or

  13. A Case of Extensive polyostotic fibrous dysplasia

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Do [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Wonkwang University, Iksan (Korea, Republic of); Hwang, Eui Hwan; Lee, Sang Rae [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Kyunghee University, Seoul (Korea, Republic of)

    2000-06-15

    Fibrous dysplasia is a benign disorder of bone consisting of intramedullary proliferation of fibrous tissue and irregularly distributed, poorly developed bone. The disease manifests itself in the monostotic form in which only one bone is involved and the polyostotic form in which multiple bones at different sites are affected. We reported a extensive case of polyostotic fibrous dysplasia with involvement of craniofacial bones, mandible, ribs, extremities. A 18-year-old man showed remarkable right facial swelling who had been treated on right femur 3 years ago with a bone graft for pathologic fracture and he recognized facial swelling 5 years ago. Extraoral radiograms and computed tomogram showed diffuse sclerosis with a ground glass appearance of the most calvarial bones, facial bones. The right mandibular lesion showed very expansible lesion with mottled appearance. Bone scans showed multifocal increased uptakes in craniofacial bones, right mandible, bilaterally in ribs, humerus, femur, tibia and characteristic various deformity of right femur (shepherd's crook deformity). This case showed exceptionally bilateral, extensive nature of bone lesion and didn't show any features of skin pigmentation and endocrine disturbances.

  14. Toxicity and Carcinogenicity Mechanisms of Fibrous Antigorite

    Directory of Open Access Journals (Sweden)

    Michael Balazy

    2007-03-01

    Full Text Available We studied the effects of fibrous antigorite on mesothelial MeT-5A and monocyte-macrophage J774 cell lines to further understand cellular mechanisms induced by asbestos fibers leading to lung damage and cancer. Antigorite is a mineral with asbestiform properties, which tends to associate with chrysotile or tremolite, and frequently occurs as the predominant mineral in the veins of several serpentinite rocks found abundantly in the Western Alps. Particles containing antigorite are more abundant in the breathing air of this region than those typically found in urban ambient air. Exposure of MeT-5A and J774 cells to fibrous antigorite at concentrations of 5-100 μg/ml for 72 hr induced dose-dependent cytotoxicity. Antigorite also stimulated the ROS production, induced the generation of nitrite and PGE2. MeT-5A cells were more sensitive to antigorite than J774 cells. The results of this study revealed that the fibrous antigorite stimulates cyclooxygenase and formation of hydroxyl and nitric oxide radicals. These changes represent early cellular responses to antigorite fibers, which lead to a host of pathological and neoplastic conditions because free radicals and PGE2 play important roles as mediators of tumor pathogenesis. Understanding the mechanisms of the cellular responses to antigorite and other asbestos particles should be helpful in designing rational prevention and treatment approaches.

  15. Fibrous zinc anodes for high power batteries

    Science.gov (United States)

    Zhang, X. Gregory

    This paper introduces newly developed solid zinc anodes using fibrous material for high power applications in alkaline and large size zinc-air battery systems. The improved performance of the anodes in these two battery systems is demonstrated. The possibilities for control of electrode porosity and for anode/battery design using fibrous materials are discussed in light of experimental data. Because of its mechanical integrity and connectivity, the fibrous solid anode has good electrical conductivity, mechanical stability, and design flexibility for controlling mass distribution, porosity and effective surface area. Experimental data indicated that alkaline cells made of such anodes can have a larger capacity at high discharging currents than commercially available cells. It showed even greater improvement over commercial cells with a non-conventional cell design. Large capacity anodes for a zinc-air battery have also been made and have shown excellent material utilization at various discharge rates. The zinc-air battery was used to power an electric bicycle and demonstrated good results.

  16. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    Energy Technology Data Exchange (ETDEWEB)

    Mark J. Rigali

    2001-10-01

    Published mechanical and thermal properties data on a variety of materials was gathered, with focus on materials that have potential with respect to developing wear resistant and damage tolerant composite for mining industry applications. Preliminary core materials of interest include but are not limited to: Diamond, Tungsten Carbide and Cemented Tungsten Carbides, Carbides of Boron, Silicon, Titanium and Aluminum, Diboride of Titanium and Aluminum, Nitrides of Aluminum, Silicon, Titanium, and Boron, Aluminum Oxide, Tungsten, Titanium, Iron, Cobalt and Metal Alloys. Preliminary boundary materials of interest include but are not limited to: W metal, WC-Co, W-Co, WFeNi, and Mo metal and alloys. Several FM test coupons were fabricated with various compositions using the above listed materials. These coupons were consolidated to varying degrees by uniaxial hot pressing, then cut and ground to expose the FM cell structure. One promising system, WC-Co core and WFeNi boundary, was consolidated to 97% of theoretical density, and demonstrates excellent hardness. Data on standard mechanical tests was gathered, and tests will begin on the consolidated test coupons during the upcoming reporting period. The program statements of work for ACR Inc. and its subcontractors, as well as the final contract negotiations, were finalized during the current reporting period. The program start date was February 22nd, 2001. In addition to the current subcontractors, Kennametal Inc., a major manufacturer of cutting tools and wear resistant tooling for the mining industry, expressed considerable interest in ACR's Fibrous Monolith composites for both machine and mining applications. At the request of Kennametal, ARC Inc fabricated and delivered several Fibrous Monolith coupons and components for testing and evaluation in the mining and machine tool applications. Additional samples of Diamond/Tungsten Carbide-6%Cobalt Fibrous Monolith were fabricated and delivered for testing Kennametal

  17. Sandwich-structured hollow fiber membranes for osmotic power generation

    KAUST Repository

    Fu, Feng Jiang

    2015-11-01

    In this work, a novel sandwich-structured hollow fiber membrane has been developed via a specially designed spinneret and optimized spinning conditions. With this specially designed spinneret, the outer layer, which is the most crucial part of the sandwich-structured membrane, is maintained the same as the traditional dual-layer membrane. The inner substrate layer is separated into two layers: (1) an ultra-thin middle layer comprising a high molecular weight polyvinylpyrrolidone (PVP) additive to enhance integration with the outer polybenzimidazole (PBI) selective layer, and (2) an inner-layer to provide strong mechanical strength for the membrane. Experimental results show that a high water permeability and good mechanical strength could be achieved without the expensive post treatment process to remove PVP which was necessary for the dual-layer pressure retarded osmosis (PRO) membranes. By optimizing the composition, the membrane shows a maximum power density of 6.23W/m2 at a hydraulic pressure of 22.0bar when 1M NaCl and 10mM NaCl are used as the draw and feed solutions, respectively. To our best knowledge, this is the best phase inversion hollow fiber membrane with an outer selective PBI layer for osmotic power generation. In addition, this is the first work that shows how to fabricate sandwich-structured hollow fiber membranes for various applications. © 2015 Elsevier B.V.

  18. Z向增强泡沫夹芯复合材料冲击损伤及冲击后压缩性能%Impact damage characteristics and post-impact compressive properties of Z-reinforcement foam core sandwich composites

    Institute of Scientific and Technical Information of China (English)

    段友社; 郭书良; 吴刚; 侯军生

    2012-01-01

    基于热压罐成型工艺,选择了树脂柱Z向增强泡沫芯材、碳纤维Z向增强泡沫芯材、Kevlar纤维缝纫增强泡沫芯材3种Z向增强复合材料结构,对夹芯结构进行了低速冲击损伤和冲击后压缩(CAI)性能研究,考察了不同Z向增强方式对冲击损伤面积和破坏模式的影响。结果表明,Z向增强对泡沫芯材产生了初始损伤,其冲击后损伤面积大于未增强泡沫夹芯结构;但Z向增强改变了夹芯结构的压缩破坏机制。通过选用合适的Z向增强材料和Z向增强参数,能够提高夹芯结构的压缩强度和CAI强度。其中当增强材料为碳纤维,增强参数为10mm×10mm时,压缩强度提高了13%,CAI强度提高超过40%。%Resin column reinforced,carbon fiber prepreg bar reinforced and kevlar fiber stitched reinforced foam core sandwich composites were produced using the same face sheets based on the autoclave manufacturing technology.The prepared sandwich structures were tested under low-velocity impact and post-impact compression.The post-impact damage characteristics and damage modes were also studied.The results indicate that initial damage of foam-core is caused by the Z-reinforcement,and the post-impact damage area increases compared with that of the unreinforced one,while the compressive failure mechanism of foam core sandwich composites is changed by the Z-reinforcement.The compressive strength and the CAI strength can be improved by choosing the right Z-reinforcement material and parameter,which increase by 13% and more than 40% respectively with carbon fiber prepreg bar reinforced at 10 mm×10 mm Z-reinforcement parameters.

  19. New "sandwich" structures conformed from three dimensional

    OpenAIRE

    1996-01-01

    Poor interlaminar properties as well as poor-skin-to-core adhesion properties are very often the common existing problems we find when designing with "sandwich" structures. A new type of 3D-fabric "sandwich" structure is being developed in order to avoid these problems. Although the manufacturing process is very simple, a very complex "sandwich" structure is obtained as a result of the complexity of the 3D-fabric used. This 3D-fabric is a 3D woven glass fabric produced on velvet weaving machi...

  20. Fabrication of Au/graphene oxide/Ag sandwich structure thin film and its tunable energetics and tailorable optical properties

    Directory of Open Access Journals (Sweden)

    Ruijin Hong

    2017-01-01

    Full Text Available Au/graphene oxide/Ag sandwich structure thin film was fabricated. The effects of graphene oxide (GO and bimetal on the structure and optical properties of metal silver films were investigated by X-ray diffraction (XRD, optical absorption, and Raman intensity measurements, respectively. Compared to silver thin film, Au/graphene oxide/Ag sandwich structure composite thin films were observed with wider optical absorption peak and enhanced absorption intensity. The Raman signal for Rhodamine B molecules based on the Au/graphene oxide/Ag sandwich nanostructure substrate were obviously enhanced due to the bimetal layer and GO layer with tunable absorption intensity and fluorescence quenching effects.

  1. Fibrous scaffolds made by co-electrospinning soluble eggshell membrane protein with biodegradable synthetic polymers.

    Science.gov (United States)

    Xiong, Xi; Li, Qiang; Lu, Jian-Wei; Guo, Zhao-Xia; Sun, Zhao-Hui; Yu, Jian

    2012-01-01

    Soluble eggshell membrane protein (SEP), isolated from natural eggshell membrane, was co-electrospun with biodegradable synthetic polymers poly(propylene carbonate) (PPC) and poly(lactic acid) (PLA) in various proportions from 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) solutions in order to prepare fibrous scaffolds having simultaneously good mechanical properties and biocompatibility. The fiber morphology was observed by field emission scanning electron microscopy, showing uniform fibers with diameter of 1.2-1.0 and 1.3-0.7 um for PPC/SEP and PLA/SEP blend fibers, respectively. Transmission electron microscopy observation shows that the blend fibers have domain-matrix phase morphology with fiber-like SEP domains in the PPC or PLA matrix, indicating the occurrence of phase separation, although interaction exists between PPC (or PLA) and SEP, as revealed by attenuated total reflectance Fourier transform infrared spectroscopy. The mechanical properties were evaluated by uniaxial tensile tests and showed that both the tensile strength and elongation at break increase with increasing incorporation of PPC (or PLA). The surface composition was investigated by X-ray photoelectron spectroscopy and SEP was found on the fiber surfaces, and as a result the surfaces of the fibrous scaffolds are superhydrophilic. NIH3T3 cell culture tests demonstrate that the PPC/SEP and PLA/SEP blend fibrous scaffolds have a much improved biocompatibility compared to pure PPC or PLA fibrous scaffolds.

  2. Malignant transformation of fibrous dysplasia into chondroblastic osteosarcoma

    Energy Technology Data Exchange (ETDEWEB)

    Kaushik, Shaifali [Department of Radiology, Medical College of Virginia, Virginia Commonwealth University, Richmond, VA (United States); Department of Radiology, Medical College of Virginia, Virginia Commonwealth University, Richmond, VA (United States); Smoker, Wendy R.K. [Department of Radiology, Medical College of Virginia, Virginia Commonwealth University, Richmond, VA (United States); Frable, William J. [Department of Pathology, Medical College of Virginia, Virginia Commonwealth University, Richmond, VA (United States)

    2002-02-01

    A case of malignant transformation of polyostotic fibrous dysplasia into maxillary chondroblastic osteosarcoma is presented. The clinical, radiographic, CT, MR imaging features and pathological findings of polyostotic fibrous dysplasia and its malignant transformation are described. Malignant transformation of fibrous dysplasia is rare and has not previously been described in the English literature in this location in McCune-Albright syndrome and in the absence of radiation treatment. (orig.)

  3. ANALISA TEKNIS DAN EKONOMIS PENGGUNAAN COREMAT UNTUK KONSTRUKSI FRP (FIBERGLASS REINFORCED PLASTIC SANDWICH PADA BADAN KAPAL

    Directory of Open Access Journals (Sweden)

    Parlindungan Manik

    2012-02-01

    Full Text Available Planning of ship construction is make its having good effectivity value and efficiency. Composite as materialalternative to changes of steel feedstock and wood has many applied named FRP (fiberglass reinforcedplastics single skin. The weakness of this FRP was heavy construction and requires many production time.Therefore, will be checked comparison between single skin with sandwich constructions for shell.In this research, the way for making composite is hand lay up method with three various thickness of skinthere are : t, t/2, and t/4. To know strength comparison from the various skin of sandwich with single skin,must be test, consist of tensile test.. The result is analyzed then compared by BKI (Biro Klasifikasi Indonesiarules for the fiberglass ship.Based on the result, indicates that optimization skin thickness of sandwich construction applies Corematwhich tensile strength it is equivalent with Single Skin at 2/3t and usage of Sandwich construction causes23,12 % lighter. In economic analyze, advantage from low weight is compensation of addition 23,12 % DWT.Material cost for Sandwich about 11,35% bigger than Single Skin construction.

  4. Analysis of Stainless Steel Sandwich Panels with a Metal Foam Care for Lightweight Fan Blade Design

    Science.gov (United States)

    Min, James B.; Ghosn, Louis J.; Lerch, Bradley A.; Raj, Sai V.; Holland, Frederic A., Jr.; Hebsur, Mohan G.

    2004-01-01

    The quest for cheap, low density and high performance materials in the design of aircraft and rotorcraft engine fan and propeller blades poses immense challenges to the materials and structural design engineers. Traditionally, these components have been fabricated using expensive materials such as light weight titanium alloys, polymeric composite materials and carbon-carbon composites. The present study investigates the use of P sandwich foam fan blade made up of solid face sheets and a metal foam core. The face sheets and the metal foam core material were an aerospace grade precipitation hardened 17-4 PH stainless steel with high strength and high toughness. The stiffness of the sandwich structure is increased by separating the two face sheets by a foam core. The resulting structure possesses a high stiffness while being lighter than a similar solid construction. Since the face sheets carry the applied bending loads, the sandwich architecture is a viable engineering concept. The material properties of 17-4 PH metal foam are reviewed briefly to describe the characteristics of the sandwich structure for a fan blade application. A vibration analysis for natural frequencies and P detailed stress analysis on the 17-4 PH sandwich foam blade design for different combinations of skin thickness and core volume %re presented with a comparison to a solid titanium blade.

  5. ANALISA TEKNIS DAN EKONOMIS PENGGUNAAN COREMAT UNTUK KONSTRUKSI FRP (FIBERGLASS REINFORCED PLASTIC SANDWICH PADA BADAN KAPAL

    Directory of Open Access Journals (Sweden)

    Parlindungan Manik

    2012-04-01

    Full Text Available Planning of ship construction is make its having good effectivity value and efficiency. Composite as material alternative to changes of steel feedstock and wood has many applied named FRP (fiberglass reinforced plastics single skin. The weakness of this FRP was heavy construction and requires many production time. Therefore, will be checked comparison between single skin with sandwich constructions for shell. In this research, the way for making composite is hand lay up method with three various thickness of skin there are : t, t/2, and t/4. To know strength comparison from the various skin of sandwich with single skin, must be test, consist of tensile test.. The result is analyzed then compared by BKI (Biro Klasifikasi Indonesia rules for the fiberglass ship. Based on the result, indicates that optimization skin thickness of sandwich construction applies Coremat which tensile strength it is equivalent with Single Skin at 2/3t and usage of Sandwich construction causes 23,12 % lighter. In economic analyze, advantage from low weight is compensation of addition 23,12 % DWT. Material cost for Sandwich about 11,35% bigger than Single Skin construction.

  6. Research and application of U-shaped steel plate-concrete composite open-web sandwich slab structure with high strength bolts%U形钢板-混凝土高强螺栓连接组合空腹夹层板楼盖结构研究与应用

    Institute of Scientific and Technical Information of China (English)

    胡岚; 马克俭

    2012-01-01

    提出一种多层大跨度结构体系——U形钢板-混凝土高强螺栓连接组合空腹夹层板楼盖,该结构体系由U形钢板-混凝土组合下肋、钢筋混凝土上肋和上下肋间设置的钢筋混凝土剪力键形成的需考虑夹芯层剪切变形的空间楼盖。介绍了该楼盖结构体系的简化计算模型、弹性连续化理论分析方法和实用分析方法,通过仿真模型试验及实际工程应用,验证了弹性连续化理论分析方法与实用分析方法的正确性。研究结果表明:采用由上、下表层薄膜刚度和具有一定抗剪刚度的剪力键夹芯层组成的U形钢板-混凝土高强螺栓连接组合空腹夹层板楼盖简化计算模型进行弹性连续化理论分析,其分析结果与仿真模型试验结果基本相符,相对误差最大不超过5%;按等强和等刚度原则将U形钢板-混凝土组合空腹夹层板折算成钢筋混凝土实腹梁的实用分析方法,其计算结果与仿真模型试验结果基本相符,相对误差最大不超过4%。以黑龙江中医药大学文体中心B区57 m×39 m+57 m×36 m双跨多层(地下1层、地上3层)工程为算例,并与原位测试结果进行比较,说明U形钢板-混凝土高强螺栓连接组合空腹夹层板楼盖安全可靠,且具有较好的经济性。%A system of multilayer large span structure, the U-shaped steel plate and concrete composite open-web sandwich slab floor with high strength bolts was put forward. The structural system is composed of the U-shaped steel plate and concrete composite upper rib, the reinforced concrete bottom rib and the reinforced concrete shear keys between upper and bottom ribs, resulting in a sandwich layer of shear deformation of space floor. This paper comprehensively introduced the simplified calculation model of the structural system using the elastic continuum theory method and the practical analysis method, and verified the effectiveness of the model through the simulation

  7. Buckling driven debonding in sandwich columns

    DEFF Research Database (Denmark)

    Østergaard, Rasmus Christian

    2008-01-01

    A compression loaded sandwich column that contains a debond is analyzed using a geometrically non-linear finite element model. The model includes a cohesive zone along one face sheet/core interface whereby the debond can extend by interface crack growth. Two geometrical imperfections are introduced......; a global imperfection of the sandwich column axis and a local imperfection of the debonded face sheet axis. The model predicts the sandwich column to be very sensitive to the initial debond length and the local face sheet imperfection. The study shows that the sensitivity to the face sheet imperfection...... results from two mechanisms: (a) interaction of local debond buckling and global buckling and (b) the development of a damaged zone at the debond crack tip. Based on the pronounced imperfection sensitivity, the author predicts that an experimental measurement of the strength of sandwich structures may...

  8. Fibrous dysplasia. Clinical review and therapeutic management.

    Science.gov (United States)

    Florez, Helena; Peris, Pilar; Guañabens, Núria

    2016-12-16

    Fibrous dysplasia is a skeletal disorder that is associated with a wide spectrum of clinical manifestations, including localized asymptomatic forms and extensive severe forms with severe bone deformities and endocrinological alterations, depending on age, location, extent and associated processes. Although the treatment of choice is based on bisphosphonates, the therapeutic efficacy of these agents in the control of disease activity remains uncertain. This article reviews the current data available on the treatment of this disease as well as the preliminary data on new therapeutic approaches. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

  9. Compressibility of air in fibrous materials

    DEFF Research Database (Denmark)

    Tarnow, Viggo

    1996-01-01

    The dynamic compressibility of air in fibrous materials has been computed for two assumed configurations of fibers which are close to the geometry of real fiber materials. Models with parallel cylinders placed in a regular square lattice and placed randomly are treated. For these models...... the compressibility is computed approximately from the diameter and mean distances between cylinders. This requires calculation of the air temperature, which is calculated for cylinders in a regular lattive by the Wigner-Seitz cell approximation. In the case of random placement, the calculation is done by a summation...

  10. [Solitary naso-sinusal fibrous tumor].

    Science.gov (United States)

    Martínez, V; Jiménez, M L; Cuatrecasas, M; Jürgens, A; de Amesti, C; Orus, C; Fabra, J M

    1995-01-01

    Here we present two clinical cases of solitary naso-sinusal fibrous tumour. This tumour has a mesenchymal origin and has an evident pleural location, with well defined immunohistochemical and ultrastructural characteristics. The clinical manifestation is an apparent benign tumour with an inclination to local aggressiveness. The most effective treatment seems to be surgical removal, but given the low number of cases mentioned (there are only eight cases reported in international literature), and the tendency to eventual recurrence, called for cobalt therapy after surgery. The evolution of clinical cases is irregular.

  11. On the Milnor fibers of sandwiched singularities

    OpenAIRE

    Nemethi, Andras; Popescu-Pampu, Patrick

    2009-01-01

    The sandwiched surface singularities are those rational surface singularities which dominate birationally smooth surface singularities. de Jong and van Straten showed that one can reduce the study of the deformations of a sandwiched surface singularity to the study of deformations of a 1-dimensional object, a so-called decorated plane curve singularity. In particular, the Milnor fibers corresponding to their various smoothing components may be reconstructed up to diffeomorphisms from those de...

  12. Electrochemical characterization of electrospun nanocomposite polymer blend electrolyte fibrous membrane for lithium battery.

    Science.gov (United States)

    Padmaraj, O; Rao, B Nageswara; Venkateswarlu, M; Satyanarayana, N

    2015-04-23

    Novel hybrid (organic/inorganic) electrospun nanocomposite polymer blend electrolyte fibrous membranes with the composition poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-co-HFP)]/poly(methyl methacrylate) [P(MMA)]/magnesium aluminate (MgAl2O4)/LiPF6 were prepared by the electrospinning technique. All of the prepared electrospun P(VdF-co-HFP), PMMA blend [90% P(VdF-co-HFP)/10% PMMA], and nanocomposite polymer blend [90% P(VdF-co-HFP)/10% PMMA/x wt % MgAl2O4 (x = 2, 4, 6, and 8)] fibrous membranes were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The fibrous nanocomposite separator-cum-polymer blend electrolyte membranes were obtained by soaking the nanocomposite polymer blend membranes in an electrolyte solution containing 1 M LiPF6 in ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). The newly developed fibrous nanocomposite polymer blend electrolyte [90% P(VdF-co-HFP)/10% PMMA/6 wt % MgAl2O4/LiPF6] membrane showed a low crystallinity, low average fiber diameter, high thermal stability, high electrolyte uptake, high conductivity (2.60 × 10(-3) S cm(-1)) at room temperature, and good potential stability above 4.5 V. The best properties of the fibrous nanocomposite polymer blend electrolyte (NCPBE) membrane with a 6 wt % MgAl2O4 filler content was used for the fabrication of a Li/NCPBE/LiCoO2 CR 2032 coin cell. The electrochemical performance of the fabricated CR 2032 cell was evaluated at a current density of 0.1 C-rate. The fabricated CR 2032 cell lithium battery using the newly developed NCPBE membrane delivered an initial discharge capacity of 166 mAh g(-1) and a stable cycle performance.

  13. Experimental and Numerical Investigation of the FRP Shear Mechanism for Concrete Sandwich Panels

    DEFF Research Database (Denmark)

    Hodicky, Kamil; Sopal, G.; Rizkalla, S.

    2015-01-01

    This paper investigates the composite action of 46 segments representing precast concrete sandwich panels (PCSPs) using a fiber-reinforced polymer [FRP; specifically, a carbon fiber-reinforced polymer (CFRP)] grid/rigid foam as a shear mechanism. The experimental aspect of the research reported i...

  14. Non-stationary oscillations of sandwich plates under local dynamic loading

    NARCIS (Netherlands)

    Skvortsov, Vitaly; Krakhmalev, Sergey; Koysin, V.; Shipsha, Andrey

    2003-01-01

    The paper addresses the elastic response of composite sandwich panels to local dynamic loading. The plane and axisymmetric formulations are considered; no overall bending is assumed. The governing equations are derived using the static Lamé equations for the core and the plate Kirchoff-Love dynamic

  15. Enhanced electrochemical performance from 3DG/LiFePO4/G sandwich cathode material

    Science.gov (United States)

    Du, Yahui; Tang, Yufeng; Chang, Chengkang

    2017-08-01

    In this paper, we have successfully synthesized a three dimensional graphene/LiFePO4/graphene (3DG/LFP/G) sandwich composite by an in-situ hydrothermal method, in which chemical vapor deposited 3D graphene acts as the high conductivity supporting framework, while the LiFePO4 nanoparticles are anchored onto the 3D graphene framework covered by graphene sheets. XRD and SEM results confirmed the formation of the 3DG/LFP/G sandwich composite. Cyclic Voltammetry curve of the sandwich composite shows sharper redox peaks and reduced voltage separation when compared to the reference electrodes, suggesting high specific capacity and good rate performance. Further charge/discharge measurements presented high capacity of 164 mAh g-1 at 0.2 C and 124 mAh g-1 at 10 C (75.7% of its initial capacity) for the sandwich composite, with capacity retention of 95.7% after 100 cycles, implying potential application in lithium ion battery at high rates. The EIS investigation suggests that both the electronic conductivity and the Li ion diffusion are promoted by the underlined 3D graphene framework, which is regarded as the reason for the enhanced electrochemical performance.

  16. Improving Performance of Polymer Fiber Reinforced Sandwich X-Joints in Naval Vessels

    DEFF Research Database (Denmark)

    Berggreen, Christian; Lundsgaard-Larsen, Christian; Karlsen, Kasper;

    2007-01-01

    In many naval ships of fiber composite sandwich construction an X-joint exists where the end bulkhead of the superstructure is attached to the deck, with a bulkhead placed in the same vertical plane below the deck. As the hull girder flexes this joint is subjected to alternating tensile and compr...

  17. Angiomatoid fibrous histiocytoma: novel MR imaging findings

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Salutario J.; Vinson, Emily N. [Duke University Medical Center, Department of Radiology, Durham, NC (United States); Moreno, Courtney Coursey [Emory University School of Medicine, Department of Radiology and Imaging Sciences, Atlanta, GA (United States); Dodd, Leslie G. [University of North Carolina School of Medicine, Department of Pathology and Laboratory Medicine, Chapel Hill, NC (United States); Brigman, Brian E. [Duke University Medical Center, Department of Orthopedic Surgery, Durham, NC (United States)

    2016-05-15

    To describe novel MR imaging features, and clinical characteristics of soft tissue angiomatoid fibrous histiocytoma (AFH) at presentation, local recurrence, and metastases. We described the MRI findings of six cases of histologically proven AFH. Pathologic findings, clinical presentation, and outcome were reviewed. Lesions were primarily cystic. At initial presentation, tumors were surrounded by low signal intensity fibrous pseudocapsule. High signal intensity consistent with the lymphoplasmacytic infiltrate was seen in T2-weighted and post-contrast images as a rim over the hypointense pseudocapsule (double rim sign). High signal intensity infiltrating tumoral cords extended into adjacent tissues, through pseudocapsular defects on T2-weighted and post-contrast images. The cystic component and tumor cell nodularity were demonstrated at post-contrast images. Clinically, lesions were often thought to be benign, underwent marginal resection, developed local recurrence, and one developed second recurrence consisting of metastases. Recurrent tumors appeared as multiple masses, misinterpreted as post-surgical changes. An intramuscular recurrence demonstrated double rim and infiltrating margin. A predominantly well-circumscribed, primarily cystic mass with double-rim and marginal infiltration on MRI suggests the possibility of AFH, in particular in child or young adult. Inclusion of these novel observations in AFH differential diagnosis may have a significant impact on treatment and prevention of recurrence. (orig.)

  18. Self-Organization of Bioinspired Fibrous Surfaces

    Science.gov (United States)

    Kang, Sung Hoon

    Nature uses fibrous surfaces for a wide range of functions such as sensing, adhesion, structural color, and self-cleaning. However, little is known about how fiber properties enable them to self-organize into diverse and complex functional forms. Using polymeric micro/nanofiber arrays with tunable properties as model systems, we demonstrate how the combination of mechanical and surface properties can be harnessed to transform an array of anchored nanofibers into a variety of complex, hierarchically organized dynamic functional surfaces. We show that the delicate balance between fiber elasticity and surface adhesion plays a critical role in determining the shape, chirality, and hierarchy of the assembled structures. We further report a strategy for controlling the long-range order of fiber assemblies by manipulating the shape and movement of the liquid-vapor interface. Our study provides fundamental understanding of the pattern formation by self-organization of bioinspired fibrous surfaces. Moreover, our new strategies offer a foundation for designing a vast assortment of functional surfaces with adhesive, optical, water-repellent, capture and release, and many more capabilities with the structural and dynamic sophistication of their biological counterparts.

  19. Geometrical modeling of fibrous materials under compression

    Science.gov (United States)

    Maze, Benoit; Tafreshi, Hooman Vahedi; Pourdeyhimi, Behnam

    2007-10-01

    Many fibrous materials such as nonwovens are consolidated via compaction rolls in a so-called calendering process. Hot rolls compress the fiber assembly and cause fiber-to-fiber bonding resulting in a strong yet porous structure. In this paper, we describe an algorithm for generating three dimensional virtual fiberwebs and simulating the geometrical changes that happen to the structure during the calendering process. Fibers are assumed to be continuous filaments with square cross sections lying randomly in the x or y direction. The fibers are assumed to be flexible to allow bending over one another during the compression process. Lateral displacement is not allowed during the compaction process. The algorithm also does not allow the fibers to interpenetrate or elongate and so the mass of the fibers is conserved. Bending of the fibers is modeled either by considering a constant "slope of bending" or constant "span of bending." The influence of the bending parameters on the propagation of compression through the material's thickness is discussed. In agreement with our experimental observations, it was found that the average solid volume fraction profile across the thickness becomes U shaped after the calendering. The application of these virtual structures in studying transport phenomena in fibrous materials is also demonstrated.

  20. Solitary fibrous tumor surrounding the carotid sheath.

    Science.gov (United States)

    Gómez-Oliveira, Guillermo; Alvarez-Flores, Modesto; Arribas-García, Ignacio; Martínez-Gimeno, Carlos

    2010-03-01

    Solitary fibrous tumors (SFTs) are rare spindle cell neoplasms that are mostly found arising from the pleura. Although SFTs recently have been reported in other regions, they are rare in the head and neck and have often been misdiagnosed due to their rarity. SFTs are benign in most cases. Clinically, SFTs usually manifest as well-circumscribed, slow-growing, smooth and painless masses. Symptoms are often minimal, although they may include sore throat, difficulty in swallowing, change of voice or trismus. CT-Scan and MRI are the most sensitive imaging procedures used. The treatment of choice is complete surgical excision of the lesion. Because recurrences have been noted up to 30 years after surgery, long-term follow up is mandatory. In this article, we present a case of a Solitary Fibrous Tumor arising in the parapharyngeal space in a 20-year-old man, involving the carotid sheath, treated by surgical excision with no recurrence after 1 year. The clinical presentation, surgical management and pathological findings are described.

  1. Fibrous Platinum-Group Minerals in “Floating Chromitites” from the Loma Larga Ni-Laterite Deposit, Dominican Republic

    Directory of Open Access Journals (Sweden)

    Thomas Aiglsperger

    2016-11-01

    Full Text Available This contribution reports on the observation of enigmatic fibrous platinum-group minerals (PGM found within a chromitite body included in limonite (“floating chromitite” from Ni-laterites in the Dominican Republic. Fibrous PGM have a Ru-Os-Ir-Fe dominated composition and are characterized by fibrous textures explained by grain-forming fibers which are significantly longer (1–5 µm than they are wide (~100 nm. Back-scattered electron (BSE images suggest that these nanofibers are platinum-group elements (PGE-bearing and form <5 µm thick layers of bundles which are oriented orthogonal to grains’ surfaces. Trace amounts of Si are most likely associated with PGE-bearing nanofibers. One characteristic fibrous PGM was studied in detail: XRD analyses point to ruthenian hexaferrum. However, the unpolished fibrous PGM shows numerous complex textures on its surface which are suggestive for neoformation processes: (i features suggesting growth of PGE-bearing nanofibers; (ii occurrence of PGM nanoparticles within film material (biofilm? associated with PGE-bearing nanofibers; (iii a Si-rich and crater-like texture hosting PGM nanoparticles and an Ir-rich accumulation of irregular shape; (iv complex PGM nanoparticles with ragged morphologies, resembling sponge spicules and (v oval forms (<1 µm in diameter with included PGM nanoparticles, similar to those observed in experiments with PGE-reducing bacteria. Fibrous PGM found in the limonite may have formed due to supergene (bio-weathering of fibrous Mg-silicates which were incorporated into desulphurized laurite during stages of serpentinization.

  2. Face/core debond fatigue crack growth characterization using the sandwich mixed mode bending specimen

    DEFF Research Database (Denmark)

    Manca, Marcello; Quispitupa, Amilcar; Berggreen, Christian;

    2012-01-01

    Face/core fatigue crack growth in foam-cored sandwich composites is examined using the mixed mode bending (MMB) test method. The mixed mode loading at the debond crack tip is controlled by changing the load application point in the MMB test fixture. Sandwich specimens were manufactured using H45...... critical load, at load ratios of R=0.1 and 0.2. The crack length was determined during fatigue testing using the analytical compliance expression and verified by visual measurements. Fatigue crack growth results revealed higher crack growth rates for mode I dominated loading. For specimens with H45 core...

  3. Application of golay complementary coded excitation schemes for non-destructive testing of sandwich structures

    Science.gov (United States)

    Arora, Vanita; Mulaveesala, Ravibabu

    2017-06-01

    In recent years, InfraRed Thermography (IRT) has become a widely accepted non-destructive testing technique to evaluate the structural integrity of composite sandwich structures due to its full-field, remote, fast and in-service inspection capabilities. This paper presents a novel infrared thermographic approach named as Golay complementary coded thermal wave imaging is presented to detect disbonds in a sandwich structure having face sheets from Glass/Carbon Fibre Reinforced (GFR/CFR) laminates and core of the wooden block.

  4. Degradation of shear stiffness of Nomex honeycomb sandwich panel in laser irradiation

    Science.gov (United States)

    Wang, Jiawei; Jiang, Houman; Wu, Lixiong; Zhu, Yongxiang; Wei, Chenghua; Ma, Zhiliang; Wang, Lijun

    2017-05-01

    Based on the overhanging beam three-point bending method, the experimental system was set up to measure the variety of shear stiffness of Nomex honeycomb sandwich panel in laser irradiation. The shear stiffness of the specimens under different laser power density was measured. The result shows that the thermal effect during the laser irradiation leads to the degradation of mechanical properties of Nomex honeycomb sandwich panel. High temperature rise rate in the specimen is another main reason for the shear stiffness degeneration. This research provides a reference for the degradation of mechanical properties of composite materials in laser irradiation and proposes a new method for the study of laser interaction with matter.

  5. Marfan syndrome with multiseptate pneumothorax and mandibular fibrous dysplasia

    Directory of Open Access Journals (Sweden)

    Kate A

    2009-01-01

    Full Text Available We describe a rare case of pneumothorax due to Marfan syndrome associated with fibrous dysplasia of the mandible. Marfan syndrome and fibrous dysplasia were possibly due to a common etiological factor. The association between the two and other tumors described in literature related to Marfan syndrome is discussed.

  6. Electrospun nanocomposite fibrous polymer electrolyte for secondary lithium battery applications

    Science.gov (United States)

    Padmaraj, O.; Rao, B. Nageswara; Jena, Paramananda; Venkateswarlu, M.; Satyanarayana, N.

    2014-04-01

    Hybrid nanocomposite [poly(vinylidene fluoride -co- hexafluoropropylene) (PVdF-co-HFP)/magnesium aluminate (MgAl2O4)] fibrous polymer membranes were prepared by electrospinning method. The prepared pure and nanocomposite fibrous polymer electrolyte membranes were soaked into the liquid electrolyte 1M LiPF6 in EC: DEC (1:1,v/v). XRD and SEM are used to study the structural and morphological studies of nanocomposite electrospun fibrous polymer membranes. The nanocomposite fibrous polymer electrolyte membrane with 5 wt.% of MgAl2O4 exhibits high ionic conductivity of 2.80 × 10-3 S/cm at room temperature. The charge-discharge capacity of Li/LiCoO2 coin cells composed of the newly prepared nanocomposite [(16 wt.%) PVdF-co-HFP+(5 wt.%) MgAl2O4] fibrous polymer electrolyte membrane was also studied and compared with commercial Celgard separator.

  7. A plastic indentation model for sandwich beams with metallic foam cores

    Institute of Scientific and Technical Information of China (English)

    Zhong-You Xie; Ji-Lin Yu; Zhi-Jun Zheng

    2011-01-01

    Light weight high performance sandwich composite structures have been used extensively in various load bearing applications.Experiments have shown that the indentation significantly reduces the load bearing capacity of sandwiched beams.In this paper,the indentation behavior of foam core sandwich beams without considering the globally axial and flexural deformation was analyzed using the principle of virtual velocities.A concisely theoretical solution of loading capacity and denting profile was presented.The denting load was found to be proportional to the square root of the denting depth.A finite element model was established to verify the prediction of the model.The load-indentation curves and the profiles of the dented zone predicted by theoretical model and numerical simulation are in good agreement.

  8. Strong and light-weight materials made of reinforced honeycomb sandwich structures

    DEFF Research Database (Denmark)

    Mikkelsen, Lars Pilgaard; Madsen, Bo

    a low cost, in order for them to compete with conventionally used materials like steel or aluminum. A great candidate for a material that can fulfil these requirements of being light, strong and low cost is a sandwich material. A sandwich material is a material that is made of a light-weight core...... with a thin layer of steel or fibre composite on top and bottom of the core. The core in a sandwich material is typically made of a honeycomb structure. Honeycomb structures have been used for more than 50 years. Until now honeycombs have been expensive to produce. However, with a new production method...... it is now possible to produce honeycombs structures at a low cost. In a large collaborative European project called INCOM, the possibility of reinforcing the honeycomb structure is investigated. The honeycomb structure is reinforced with sustainable fibres as the fibres are extracted from saw dust....

  9. On the analysis of a mixed mode bending sandwich specimen for debond fracture characterization

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2009-01-01

    The mixed mode bending specimen originally developed for mixed mode delamination fracture characterization of unidirectional composites has been extended to the study of debond propagation in foam cored sandwich specimens. The compliance and strain energy release rate expressions for the mixed mode...... bending sandwich specimen are derived based on a superposition analysis of solutions for the double cantilever beam and cracked sandwich beam specimens by applying a proper kinematic relationship for the specimen deformation combined with the loading provided by the test rig. This analysis provides also...... expressions for the global mode mixities. An extensive parametric analysis to improve the understanding of the influence of loading conditions, specimen geometry and mechanical properties of the face and core materials has been performed using the derived expressions and finite element analysis. The mixed...

  10. Finite Element Analysis of Bend Test of Sandwich Structures Using Strain Energy Based Homogenization Method

    Directory of Open Access Journals (Sweden)

    Hassan Ijaz

    2017-01-01

    Full Text Available The purpose of this article is to present a simplified methodology for analysis of sandwich structures using the homogenization method. This methodology is based upon the strain energy criterion. Normally, sandwich structures are composed of hexagonal core and face sheets and a complete and complex hexagonal core is modeled for finite element (FE structural analysis. In the present work, the hexagonal core is replaced by a simple equivalent volume for FE analysis. The properties of an equivalent volume were calculated by taking a single representative cell for the entire core structure and the analysis was performed to determine the effective elastic orthotropic modulus of the equivalent volume. Since each elemental cell of the hexagonal core repeats itself within the in-plane direction, periodic boundary conditions were applied to the single cell to obtain the more realistic values of effective modulus. A sandwich beam was then modeled using determined effective properties. 3D FE analysis of Three- and Four-Point Bend Tests (3PBT and 4PBT for sandwich structures having an equivalent polypropylene honeycomb core and Glass Fiber Reinforced Plastic (GFRP composite face sheets are performed in the present study. The authenticity of the proposed methodology has been verified by comparing the simulation results with the experimental bend test results on hexagonal core sandwich beams.

  11. Evaluation of effective thermal diffusivity and conductivity of fibrous materials through computational micromechanics

    Science.gov (United States)

    Ahmadi, Isa

    2017-01-01

    The aim of present study is to investigate the effective thermal properties of composite material via micromechanical modeling of the composite material as a heterogeneous material. These properties mainly include the thermal diffusivity and the thermal conductivity of composites. For this purpose, a definition is presented for effective thermal diffusivity for heterogeneous materials based on heat diffusion rate into the material in a transient heat transfer. A micromechanical model based on the Representative Volume Element (RVE) is presented for modeling the heat conduction in the fibrous composite materials. An appropriate heat transfer problem for the RVE is defined so that by the analogy of the numerical results the effective properties of the RVE can be estimated. A numerical method is employed to analyze the steady-state and transient heat flux and temperature in the RVE. To validate the model, the predictions of present model are compared with results of analytical method, FEM and some available experimental data in the open literature. The effective thermal conductivity and thermal diffusivity are then obtained for fibrous composites via the present micromechanical model. The SiC/Ti, SiC/Ti6%Al4%V and Glass/Epoxy composites with various fiber volume fractions are considered in this study.

  12. Energy Dissipation in Sandwich Structures During Axial Compression

    DEFF Research Database (Denmark)

    Urban, Jesper

    2002-01-01

    The purpose of this paper is to investigate the energy dissipation in sandwich structures during axial crushing. Axial crushing tests on six sandwich elements are described. The sandwich elements consist of a polyurethane core and E-glass/Polyester skin. The elements compare to full-scale structu......The purpose of this paper is to investigate the energy dissipation in sandwich structures during axial crushing. Axial crushing tests on six sandwich elements are described. The sandwich elements consist of a polyurethane core and E-glass/Polyester skin. The elements compare to full...

  13. A Network Model for the Effective Thermal Conductivity of Rigid Fibrous Refractory Insulations

    Science.gov (United States)

    Marschall, Jochen; Cooper, D. M. (Technical Monitor)

    1995-01-01

    A procedure is described for computing the effective thermal conductivity of a rigid fibrous refractory insulation. The insulation is modeled as a 3-dimensional Cartesian network of thermal conductance. The values and volume distributions of the conductance are assigned to reflect the physical properties of the insulation, its constituent fibers, and any permeating gas. The effective thermal conductivity is computed by considering the simultaneous energy transport by solid conduction, gas conduction and radiation through a cubic volume of model insulation; thus the coupling between heat transfer modes is retained (within the simplifications inherent to the model), rather than suppressed by treating these heat transfer modes as independent. The model takes into account insulation composition, density and fiber anisotropy, as well as the geometric and material properties of the constituent fibers. A relatively good agreement, between calculated and experimentally derived thermal conductivity values, is obtained for a variety of rigid fibrous insulations.

  14. Vibration Characteristics of Axially Moving Titanium- Polymer Nanocomposite Faced Sandwich Plate Under Initial Tension

    Directory of Open Access Journals (Sweden)

    Ali Ghorbanpour Arani

    2017-07-01

    Full Text Available In the present research, vibration and instability of axially moving sandwich plate made of soft core and composite face sheets under initial tension is investigated. Single-walled carbon nano-tubes (SWCNTs are selected as a reinforcement of composite face sheets inside Poly methyl methacrylate (PMMA matrix. Higher order shear deformation theory (HSDT is utilized due to its accuracy of polynomial functions than other plate theories. Based on extended rule of mixture, the structural properties of composite face sheets are taken into consideration. Motion equations are obtained by means of Hamilton’s principle and solved analytically. Influences of various parameters such as axially moving speed, volume fraction of CNTs, pre-tension, thickness and aspect ratio of sandwich plate on the vibration characteristics of moving system are discussed in details. The results indicated that the critical speed of moving sandwich plate is strongly dependent on the volume fraction of CNTs. Therefore, the critical speed of moving sandwich plate can be improved by adding appropriate values of CNTs. The results of this investigation can be used in design and manufacturing of marine vessels and aircrafts.

  15. A multifunctional heat pipe sandwich panel structure

    Energy Technology Data Exchange (ETDEWEB)

    Queheillalt, Douglas T.; Wadley, Haydn N.G. [University of Virginia, Department of Materials Science and Engineering, 140 Chemistry Way, P.O. Box 400745, Charlottesville, VA 22904 (United States); Carbajal, Gerardo [University of Turabo, School of Engineering, P.O. Box 3030, Gurabo 00778 (Puerto Rico); Peterson, G.P. [University of Colorado at Boulder, 914 Broadway, Boulder, CO 80309 (United States)

    2008-01-15

    A multifunctional sandwich panel combining efficient structural load support and thermal management characteristics has been designed and experimentally assessed. The concept is based upon a truncated, square honeycomb sandwich structure. In closed cell honeycomb structures, the transport of heat from one face to the other occurs by a combination of conduction through the webs and convection/radiation within the cells. Here, much more effective heat transport is achieved by multifunctionally utilizing the core as a heat pipe sandwich panel. Its interior consists of a 6061 aluminum truncated-square honeycomb core covered with a stochastic open-cell nickel foam wick. An electroless nickel plating barrier layer inhibited the chemical reaction between the deionized water working fluid and the aluminum structure, retarding the generation of non-condensable hydrogen gas. A thermodynamic model was used to guide the design of the heat pipe sandwich panel. We describe the results of a series of experiments that validate the operational principle of the multifunctional heat pipe sandwich panel and characterize its transient response to an intense localized heat source. The systems measured thermal response to a localized heat source agrees well with that predicted by a finite difference method model used to predict the thermal response. (author)

  16. Sandwich Panels Evaluated With Ultrasonic Spectroscopy

    Science.gov (United States)

    Cosgriff, Laura M.

    2004-01-01

    Enhanced, lightweight material systems, such as 17-4PH stainless steel sandwich panels are being developed for use as fan blades and fan containment systems for next-generation engines. The bond strength between the core and face sheets is critical in maintaining the structural integrity of the sandwich structure. To improve the inspection and production of these systems, researchers at the NASA Glenn Research Center are using nondestructive evaluation (NDE) techniques, such as ultrasonic spectroscopy, to evaluate the brazing quality between the face plates and the metallic foam core. The capabilities and limitations of a swept-frequency approach to ultrasonic spectroscopy were evaluated with respect to these sandwich structures. This report discusses results from three regions of a sandwich panel representing different levels of brazing quality between the outer face plates and a metallic foam core. Each region was investigated with ultrasonic spectroscopy. Then, on the basis of the NDE results, three shear specimens sectioned from the sandwich panel to contain each of these regions were mechanically tested.

  17. A solitary fibrous tumor of the kidney

    Directory of Open Access Journals (Sweden)

    Anuruddha M Abeygunasekera

    2015-01-01

    Full Text Available A solitary fibrous tumor (SFT is an uncommon spindle cell neoplasm that usually occurs in the pleura, but may occur in extrapleural sites. Its occurrence in the kidney is rare. We report a SFT, clinically thought to be a renal cell carcinoma arising in the kidney of a 68-year-old female. The tumor was well-circumscribed and composed of a mixture of spindle cells and dense collagenous bands. Immunohistochemical studies revealed reactivity for CD34, CD99, and Bcl-2 protein, with no staining for keratin or muscle markers, confirming the diagnosis. The immunohistochemical study was the key to diagnosis. Several younger members of her family had colorectal and lung cancers suggesting the possibility of a familial or genetic susceptibility.

  18. Malignant fibrous histiocytoma of the abdominal wall

    Directory of Open Access Journals (Sweden)

    Arif Aslaner

    2015-01-01

    Full Text Available Malignant fibrous histiocytoma (MFH or undifferentiated pleomorphic sarcoma is a type of malignt neoplasm that arises from any soft tissue and bone involving extremities, abdomen and retroperitoneum. MFH of the external oblique abdominis muscle is rare. Surgical resection of the mass is the treatment of choice depending on the stage of the disease and the invasion depth of the tumor. Radiotherapy, chemotherapy and immunotherapy are the other treatment methods. We present a case of a 71-year old man with the diagnosis of MFH on external oblique muscle which was completely resected. We believe that adjuvant chemoradiotherapy following surgical resection of the tumor was the most appropriate treatment for this disease.

  19. Cutaneous changes in fibrous hamartoma of infancy

    Directory of Open Access Journals (Sweden)

    Pilar F-Eire

    2013-01-01

    Full Text Available Only a few published case of fibrous hamartoma of infancy (FHI have commented on the changes in the overlying skin. There are descriptions of individual cases with cutaneous hyperpigmentation, hypertrichosis and hyperhidrosis. It is interesting to describe our case because, to our knowledge, the altered pigmentation of the overlying skin, with hairs on the surface, and eccrine gland hyperplasia combined with abortive hair follicles has not been reported together in association with the FHI. We recommend that all the biopsies must be excisional including overlying skin, thus the epidermal and dermal adnexal changes can be assessed in the microscopic evaluation which could have relevant implications from clinical and embryological point of view.

  20. [Non-ossifying fibroma (metaphyseal fibrous defect)].

    Science.gov (United States)

    Rogozhin, D V; Konovalov, D M; Kozlov, A S; Talalaev, A G; Ektova, A P

    2016-01-01

    Non-ossifying fibroma (NOF) or metaphyseal fibrous defect (MFD) is benign fibroblast proliferation with the presence of osteoclast-like multinucleated giant cells. The most cases of NOF/MFD occur in the metaphysis of the long tubular bones of the lower extremities, more commonly in the metaphysis of the femur and in the proximal metaphysis of the tibia. This lesion has a characteristic X-ray pattern and requires no surgical intervention, except for cases of a pathologic fracture or a risk for the latter. The paper analyzes 35 NOF/MFD cases in children and adolescents. It has been found that one and all patients have undergone surgery, suggesting the low awareness of this abnormality among radiodiagnosticians, pathologists, and surgeons.

  1. Symptomatic fibrous lunato-triquetral coalition

    Energy Technology Data Exchange (ETDEWEB)

    Staebler, A.; Glaser, C.; Reiser, M. [Department of Diagnostic Radiology, Ludwig Maximilians University of Munich (Germany); Resnick, D. [Department of Radiology, Veterans Administration Medical Center, San Diego, CA (United States)

    1999-10-01

    In general, carpal coalitions are considered to be asymptomatic. Incomplete separated joints and associated changes similar to osteoarthritis and pseudoarthrosis are known as possible causes of wrist pain. We present the clinical history, plain-film, and MR imaging findings of two patients with symptomatic fibrous lunato-triquetral coalition. Conventional films disclosed a narrowed space between the lunate and triquetral bone with cysts and sclerosis similar to pseudoarthrosis. Magnetic resonance imaging showed bone marrow edema adjacent to the incomplete separated lunato-triquetral joint and Gd-DTPA enhancing fibrovascular tissue in the synovium and subarticular cysts, explaining the pain over the ulnar-sided wrist. Patients with congenital lunato-triquetral coalition may poorly tolerate stress loading or trauma, resulting in a symptomatic state similar to degenerative arthritis or pseudoarthrosis, which is demonstrated by enhanced MR imaging. (orig.) With 2 figs., 23 refs.

  2. Method of manufacturing fibrous hemostatic bandages

    Science.gov (United States)

    Larsen, Gustavo; Spretz, Ruben; Velarde-Ortiz, Raffet

    2012-09-04

    A method of manufacturing a sturdy and pliable fibrous hemostatic dressing by making fibers that maximally expose surface area per unit weight of active ingredients as a means for aiding in the clot forming process and as a means of minimizing waste of active ingredients. The method uses a rotating object to spin off a liquid biocompatible fiber precursor, which is added at its center. Fibers formed then deposit on a collector located at a distance from the rotating object creating a fiber layer on the collector. An electrical potential difference is maintained between the rotating disk and the collector. Then, a liquid procoagulation species is introduced at the center of the rotating disk such that it spins off the rotating disk and coats the fibers.

  3. 不同溶剂配比及后处理温度对电纺PVDF/PEI复合纤维薄膜β相含量的影响%Effect of different solvent ratio and post-treatment temperature on the beta phase content ofelectrospinning PVDF/PEI composite fibrous membranes

    Institute of Scientific and Technical Information of China (English)

    刘京强; 崔巍巍; 刘立柱; 唐冬雁; 陆以杉; 张娜; 翁凌

    2016-01-01

    βphase polyvinyldiene fluoride (PVDF)has attracted much attention due to its excellent piezoelectric and pyroelectric properties.In this paper,PVDF and polyetherimide(PEI)are dissolved in component solvent according to the mass ratio of m(PVDF)/m(PEI)=8/2,the mixed solvent is composed of N,N-dimethyl-formamide and tetrahydrofuran on the basis of different mass ratio.PVDF/PEI composite fiber membrane was prepared using the electrospinning technology.SEM,XRD and FT-IR were used to analyzed the influences of different solvent mass ratio and post processing temperature on fiber morphology,crystallinty,the content of beta phase,and the ferroelectric properties of electrospinning PVDF/PEI composite fibrous membranes The op-timal solvent ratio and the post-treatment temperature were obtained.%β相聚偏氟乙烯(PVDF)因其具有良好的压电、热电性能而受到广泛的关注.按质量比聚偏氟乙烯(PVDF)/聚醚酰亚胺(PEI)为8/2的混合聚合物溶解在N,N-二甲基甲酰胺(DMF)、四氢呋喃(THF)不同比例的混合溶剂中.利用静电纺丝技术制备PVDF/PEI复合纤维薄膜.通过SEM、XRD、FT-IR测试分析静电纺丝过程中不同溶剂质量比以及不同后处理温度对制备的PVDF/PEI复合纤维膜的结晶度、结晶部分中β相含量和复合纤维薄膜铁电性能的影响,得到了制备高β相含量PVDF的最优化的溶剂配比和后处理温度.

  4. Mechanical properties and experimental researches of new CSIPs sandwich panels

    Directory of Open Access Journals (Sweden)

    Du Wenfeng

    2017-01-01

    Full Text Available The advantages of glass fiber reinforced composites (FRP and SIPs (structural insulated panels are combined, and a new type of sandwich panel called composite structural insulated panels (CSIPs is proposed. Through the adhesive bonding, CSIPs are made of FRP as face sheets and expanded polyethylene foam (EPS as a core. To master the mechanical characteristics of CSIPs, firstly, adopting the large deflection theory of Reissener in this paper derived the calculation formula of displacement and the stability critical load of CSIPs. Then, ANSYS software was used to carry on the analysis of finite element simulation. Finally, a testing piece of CSIP with length 1000mm and breath 1000mm was made and a test was done. The results show that the theoretical analysis results, finite element simulation results and test results are basically coincide. So the calculating formula of deformation and bearing capacity of CSIPs are correct. And CSIPs have the outstanding advantages of light weight and high strength.

  5. Vibro-acoustics of lightweight sandwich structures

    CERN Document Server

    Lu, Tianjian

    2014-01-01

    Vibro-Acoustics of Lightweight Sandwich Structures introduces the study of the coupled vibration and acoustic behavior of lightweight sandwich structures in response to harmonic force and sound pressure. This book focuses on the theoretical modeling and experimental investigation of lightweight sandwich structures in order to provide a predictive framework for vibro-acoustic characteristics of typical engineering structures. Furthermore, by developing solution tools, it concentrates on the influence of key systematic parameters leading to effective guidance for optimal structure design toward lightweight, high-stiffness and superior sound insulation capability. This book is intended for researchers, scientists, engineers and graduate students in mechanical engineering especially in structural mechanics, mechanics and acoustics. Fengxian Xin and Tianjian Lu both work at the School of Aerospace, Xi’an Jiaotong University.

  6. Novel 1-D Sandwich Photonic Bandgap Structure

    Institute of Scientific and Technical Information of China (English)

    庞云波; 高葆新

    2004-01-01

    A sandwich photonic bandgap (PBG) structure is a novel PBG structure whose periodic lattice is buried in the middle of a substrate. Neither drilling nor suspending the substrate is required, and the integrity of the ground plane is maintained. This paper presents several modification techniques for sandwich PBG structure fabrication. The forbidden gap can be improved by adopting the chirping technique, applying the tapering technique, enlarging the periodic elements, adjusting the location of the periodic lattice in the substrate, and using different dielectric media H-shape elements. A finite difference time domain method is applied to analyze the structures. Deep and wide stopbands can be obtained using the modified sandwich structures. Experimental measurement results agree well with the theoretical analysis.

  7. Behaviour of Metal Foam Sandwich Panels

    DEFF Research Database (Denmark)

    2011-01-01

    Sandwich panels as used in structures comprise of a foam core enclosed by thin high strength steel faces. This paper discusses currently design formulae of local buckling behaviour of such panels using the finite element method. Multiple wave finite element models were adopted to investigate...... and examine the adequacy of currently used approach for the design of sandwich panels. The paper presents brief details of the finite element model used including geometry, load pattern and boundary conditions. The selected model gives good agreement with experimental results from Pokharel and Mahendran (2003......). The study shows that currently available design formulae are conservative for stocky sandwich plate elements while being over-conservative for high slenderness. A unified design formula of local buckling behaviour applicable to the full range of slenderness is developed....

  8. Natural rubber: leather composites

    OpenAIRE

    K. Ravichandran; N. Natchimuthu

    2005-01-01

    Leather is a fibrous protein consisting of collagen in a three dimensionally crosslinked network. Chrome tanning of leather improves the appearance of leather but at the same time emits both solid and liquid chrome leather wastes. Scrap rubber recycling using untreated and neutralized leather fibrous particles in natural rubber has been studied. Vulcanization, mechanical, morphological and swelling properties of the natural rubber - scrap rubber composites containing neutralized leather have ...

  9. Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

    Science.gov (United States)

    Ryan, Shannon; Christiansen, Eric; Lear, Dana

    2009-01-01

    risk analysis software, and includes the effect of panel thickness, core density, and facesheet material properties. A comparison between the shielding performance of foam core sandwich panel structures and common MMOD shielding configurations is made for both conservative (additional 35% non-ballistic mass) and optimistic (additional mass equal to 30% of bumper mass) considerations. Suggestions to improve the shielding performance of foam core sandwich panels are made, including the use of outer mesh layers, intermediate fabric/composite layers, and varying pore density.

  10. A novel 3D sandwich structure of hybrid graphite nanosheets and silver nanowires as fillers for improved thermal conductivity

    Science.gov (United States)

    Zhuang, Xiao; Zhou, Yongcun; Liu, Feng

    2017-01-01

    We explored a novel 3D sandwich structure of fillers in the polymer matrix to enhance thermal conductivity. A variety of fillers in the polymer matrix play a significant role in the physical properties of the composite. Fillers containing particle and line structures are popular, and enhance the thermal and electrical conductivities. Therefore, filler-based matrix network improves conductivity. We propose a sandwich structure consisting of hybrid graphite nanosheets (two dimensions), and silver nanowires (AgNWs) (one dimension), to create a 3D sandwich structure of polyimide matrix with improved thermal conductivity. Surface treatment of graphite and silver nanowires were conducted to reduce the dielectric constant of the composite. We designed the filler of 20 wt% resulting in a high thermal conductivity of 3.21 W m‑1 K‑1 with 15% C@SiO2 and 5% AgNWs@SiO2 filler loading. The novel combination and structure markedly enhanced the thermal conductivity of the composite.

  11. Development of a High-fidelity Experimental Substructure Test Rig for Grid-scored Sandwich Panels in Wind Turbine Blades

    DEFF Research Database (Denmark)

    Laustsen, Steffen; Lund, Erik; Kühlmeier, L.;

    2014-01-01

    This paper outlines high-fidelity experimental substructure testing of sandwich panels which constitute the aerodynamic outer shell of modern wind turbine blades. A full-scale structural experimental and numerical characterisation of a composite wind turbine blade has been conducted. The developm...... of substructure tests for composite wind turbine blades. Furthermore, recommendations on the use of grid-scored sandwich structures in wind turbine blades are presented, which outline the sensitivity in terms of quasi-static strength to the established loading conditions.......This paper outlines high-fidelity experimental substructure testing of sandwich panels which constitute the aerodynamic outer shell of modern wind turbine blades. A full-scale structural experimental and numerical characterisation of a composite wind turbine blade has been conducted...

  12. AA, sandwich line with magnetic horn

    CERN Multimedia

    1980-01-01

    The magnetic horn, focusing the antiprotons emanating from the target, was affixed to a sandwich line through which the 150 kA pulses were supplied. Expecting to have to change from time to time the fragile horn (inner conductor only 0.7 mm thick), the assembly was designed for quick exchange. At the lower end of the sandwich line we see the connectors for the high-current cables, at the upper end the magnet horn. It has just been lifted from the V-supports which held it aligned downstream of the target. Continue with 8010293.

  13. Hyperglucagonaemia analysed by glucagon sandwich ELISA

    DEFF Research Database (Denmark)

    Albrechtsen, Nicolai Jacob Wewer; Hartmann, Bolette; Veedfald, Simon

    2014-01-01

    characterised. The specific determination of fully processed, intact glucagon requires a 'sandwich' assay employing a combination of antibodies directed against both N- and C-termini. We compared a novel assay for intact glucagon with a highly sensitive C-terminal RIA (hitherto considered specific) to determine...... the extent to which the hyperglucagonaemia measured in clinical samples was caused by authentic glucagon. METHODS: We examined the performance of three commercial glucagon 'sandwich' ELISAs. The ELISA with the best overall performance was selected to compare glucagon measurements in clinical samples...

  14. OPTIMAL DESIGN OF QUADRATIC SANDWICH PLATE

    Directory of Open Access Journals (Sweden)

    TIMAR Dr. Imre

    2016-05-01

    Full Text Available In this paper, we show the optimal design of the three-layered sandwich plates. The objective function contains the material and fabrication costs. The design constraints are the maximal stresses, the deflection of plates and damping of vibrations. The unknown is the thickness of the filling foam. By the mathematical method, we define the minima of the cost function and the optimal thickness of the filling layer of foam. The active constraint is the deflection, so we calculate of the costs of the sandwich plate with the homogeneous plate.

  15. Advanced Mechanical Testing of Sandwich Materials

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Christian; Jenstrup, Claus

    2008-01-01

    An advanced digital optical system has been used to measure surface strains on sandwich face and core specimens tested in a project concerned with improved criteria for designing sandwich X-joints. The face sheet specimens were of glass reinforced polyester and were tested in tension. The core...... specimens were of PVC foam and were tested in compression. The tests were performed in order to validate the use of the measurement system on these materials and to obtain material data for use in numerical simulations. While some limitations were identified, the optical system performed well and appears...

  16. Solitary Fibrous Tumor of the Cerebello-Pontine Angle

    Science.gov (United States)

    Biggs, Nigel D.; Fagan, Paul A.; Turner, Jennifer J.; Doust, Bruce

    1999-01-01

    A case is presented of solitary fibrous tumor occurring in the cerebello-pontine angle. There have been only two other reported cases of a solitary fibrous tumors in this region. Imaging studies showed the tumor to be characteristic in shape and position of an acoustic tumor. However, at surgery the tumor was found to have a “rock hard” consistency. Solitary fibrous tumor differs from acoustic schwannoma and meningioma in its histopathological features and in this case, regrowth, after incomplete excision, was extremely rapid. ImagesFigure 2Figure 3Figure 4Figure 5Figure 6 PMID:17171119

  17. Fibrous Dysplasia versus Juvenile Ossifying Fibroma: A Dilemma.

    Science.gov (United States)

    Nair, Sreelakshmi N; Kini, Raghavendra; Rao, Prasanna Kumar; Bhandarkar, Gowri P; Kashyp, Roopashri Rajesh; Rai, Manjunath; Naik, Neel; Santhosh, Athul

    2016-01-01

    Fibrous dysplasia (FD) is a condition characterized by excessive proliferation of bone forming mesenchymal cells which can affect one bone (monostotic type) or multiple bones (polyostotic type). It is predominantly noticed in adolescents and young adults. Fibrous dysplasia affecting the jaws is an uncommon condition. The most commonly affected facial bone is the maxilla, with facial asymmetry being the chief complaint. The lesion in many instances is confused with ossifying fibroma (OF). Diagnosis of these two lesions has to be done based on clinical, radiographic, and microscopic findings. Here, we present a case of fibrous dysplasia of maxilla in a nine-year-old boy mimicking juvenile ossifying fibroma.

  18. Fibrous Dysplasia versus Juvenile Ossifying Fibroma: A Dilemma

    Science.gov (United States)

    Rao, Prasanna Kumar; Bhandarkar, Gowri P.; Rai, Manjunath; Naik, Neel; Santhosh, Athul

    2016-01-01

    Fibrous dysplasia (FD) is a condition characterized by excessive proliferation of bone forming mesenchymal cells which can affect one bone (monostotic type) or multiple bones (polyostotic type). It is predominantly noticed in adolescents and young adults. Fibrous dysplasia affecting the jaws is an uncommon condition. The most commonly affected facial bone is the maxilla, with facial asymmetry being the chief complaint. The lesion in many instances is confused with ossifying fibroma (OF). Diagnosis of these two lesions has to be done based on clinical, radiographic, and microscopic findings. Here, we present a case of fibrous dysplasia of maxilla in a nine-year-old boy mimicking juvenile ossifying fibroma. PMID:28101383

  19. New examples of sandwich gravitational waves and their impulsive limit

    CERN Document Server

    Podolsky, J

    1998-01-01

    Non-standard sandwich gravitational waves are constructed from the homogeneous pp vacuum solution and the motions of free test particles in the space-times are calculated explicitly. They demonstrate the caustic property of sandwich waves. By performing limits to impulsive gravitational wave it is demonstrated that the resulting particle motions are identical regardless of the ''initial'' sandwich.

  20. General Deposition of Metal-Organic Frameworks on Highly Adaptive Organic-Inorganic Hybrid Electrospun Fibrous Substrates.

    Science.gov (United States)

    Liu, Chang; Wu, Yi-Nan; Morlay, Catherine; Gu, Yifan; Gebremariam, Binyam; Yuan, Xiao; Li, Fengting

    2016-02-01

    Electrospun nanofibrous mats are ideal substrates for metal-organic frameworks (MOFs) crystal deposition because of their specific structural parameters and chemical tenability. In this work, we utilized organic-inorganic hybrid electrospun fibrous mats as support material to study the deposition of various MOF particles. HKUST-1 and MIL-53(Al) were produced through solvothermal method, while ZIF-8 and MIL-88B(Fe) were prepared using microwave-induced heating method. The synthesis procedure for both methods were simple and effective because the hybrid nanofibrous mats showed considerable affinity to MOF particles and could be used without additional modifications. The obtained MOF composites exhibited effective incorporation between MOF particles and the porous substrates. MIL-53(Al) composite was applied as fibrous sorbent and showed enhanced adsorption capacity and removal rate, as well as easier operation, compared with thepowdered sample. Moreover, MIL-53(Al) composite was easier to be regenerated compared with powder form.

  1. Preparation of micro/nano-fibrous brushite coating on titanium via chemical conversion for biomedical applications

    Science.gov (United States)

    Liu, Bing; Guo, Yong-yuan; Xiao, Gui-yong; Lu, Yu-peng

    2017-03-01

    Calcium phosphate coatings have been applied on the surface of Ti implants to realize better osseointegration. The formation of dicalcium phosphate dihydrate (CaHPO4·2H2O), mineralogically named brushite on pure Ti substrate has been investigated via chemical conversion method. Coating composition and microstructure have been investigated by X-ray diffractometer, Fourier transform infrared spectrometer and field emission scanning electron microscope. The results reveal that the coatings are composed of high crystalline brushite with minor scholzite (CaZn2(PO4)2·2H2O). A micro/nano-scaled fibrous morphology can be produced in the acidic chemical conversion bath with pH 5.00. The surface of the fibrous brushite coating exhibits high hydrophilicity and corrosion resistance in the simulated body fluid. The osteoblast cells grow and spread actively on the coated samples and the proliferation numbers and alkaline phosphate activities of the cells improve significantly compared to the uncoated Ti. It is suggested that the micro/nano-fibrous brushite coating can be a potential approach to improve the osteoinductivity and osteoconductivity of Ti implant, due to its similarity in morphology and dimension to inorganic components of biological hard tissues, and favorable responses to the osteoblasts.

  2. Meurigite, a new fibrous iron phosphate resembling kidwellite

    Science.gov (United States)

    Birch, W.D.; Pring, A.; Self, P.G.; Gibbs, R.B.; Keck, E.; Jensen, M.C.; Foord, E.E.

    1996-01-01

    Meurigite is a new hydrated potassium iron phosphate related to kidwellite and with structural similarities to other late-stage fibrous ferric phosphate species. It has been found at four localities so far - the Santa Rita mine, New Mexico, U.S.A.; the Hagendorf-Sud pegmatite in Bavaria, Germany; granite pegmatite veins at Wycheproof, Victoria. Australia; and at the Gold Quarry Mine, Nevada, U.S.A. The Santa Rita mine is the designated type locality. Meurigite occurs as tabular, elongated crystals forming spherical and hemispherical clusters and drusy coatings. The colour ranges from creamy white to pale yellow and yellowish brown. At the type locality, the hemispheres may reach 2 mm across, but the maximum diameter reached in the other occurrences is usually less than 0.5 mm. A wide variety of secondary phosphate minerals accompanies meurigite at each locality, with dufrenite, cyrilovite. beraunite, rockbridgeite and leucophosphite amongst the most common. Vanadates and uranates occur with meurigite at the Gold Quarry mine. Electron microprobe analysis and separate determination of H2O and CO2 on meurigite from the type locality gave a composition for which several empirical formulae could be calculated. The preferred formula, obtained on the basis of 35 oxygen atoms, is (K0.85Na0.03)??0.88(Fe7.013+Al0.16Cu0.02)??7.19 (PO4)5.11(CO3)0.20(OH) 6.7??7-7.25H2O, which simplifies to KFe73+(PO4)5(OH) 7??8H2O. Qualitative analyses only were obtained for meurigite from the other localities, due to the softness and openness of the aggregates. Because of the fibrous nature of meurigite, it was not possible to determine the crystal structure, hence the exact stoichiometry remains uncertain. The lustre of meurigite varies from vitreous to waxy for the Santa Rita mine mineral, to silky for the more open sprays and internal surfaces elsewhere. The streak is very pale yellow to cream and the estimated Mohs hardness is about 3. Cleavage is perfect on {001] and fragments from the

  3. AA, sandwich line with magnetic horn

    CERN Document Server

    1980-01-01

    Continuation from 8010293: Finally, the sandwich line with the horn is placed on the ground, for the horn to be inspected and, if needed, exchanged for a new one. The whole procedure was trained with several members of the AA team, for quick and safe handling, and to share the radiation dose amongst them.

  4. Proof of the Thin Sandwich Conjecture

    CERN Document Server

    Bartnik, R; Bartnik, Robert; Fodor, Gyula

    1993-01-01

    We prove that the Thin Sandwich Conjecture in general relativity is valid, provided that the data $(g_{ab},\\dot g_{ab})$ satisfy certain geometric conditions. These conditions define an open set in the class of possible data, but are not generically satisfied. The implications for the ``superspace'' picture of the Einstein evolution equations are discussed.

  5. Behaviour of Metal Foam Sandwich Panels

    DEFF Research Database (Denmark)

    2011-01-01

    Sandwich panels as used in structures comprise of a foam core enclosed by thin high strength steel faces. This paper discusses currently design formulae of local buckling behaviour of such panels using the finite element method. Multiple wave finite element models were adopted to investigate...

  6. Structural detailing of openings in sandwich panels

    NARCIS (Netherlands)

    Tomà, T.; Courage, W.

    1996-01-01

    European Recommendations exist which provide calculation rules to determine the strength and stiffness of sandwich panels composed of two metal faces with a foam in between. In case of openings in such panels (e.g. for windows) an influence will appear with regard to the stiffness and loadbearing ca

  7. Organometallic half-sandwich iridium anticancer complexes

    NARCIS (Netherlands)

    Liu, Z.; Habtemariam, A.; Pizarro, A.M.; Fletcher, S.A.; Kisova, A.; Vrana, O.; Salassa, L.; Bruijnincx, P.C.A.|info:eu-repo/dai/nl/33799529X; Clarkson, G.J.; Brabec, V.; Sadler, Peter J.

    2011-01-01

    The low-spin 5d6 IrIII organometallic half-sandwich complexes [(η5-Cpx)Ir(XY)Cl]0/+, Cpx = Cp*, tetramethyl(phenyl)cyclopentadienyl (Cpxph), or tetramethyl(biphenyl)cyclopentadienyl (Cpxbiph), XY = 1,10-phenanthroline (4−6), 2,2′-bipyridine (7−9), ethylenediamine (10 and 11), or picolinate (12−14),

  8. Feedback Sandwiches Affect Perceptions but Not Performance

    Science.gov (United States)

    Parkes, Jay; Abercrombie, Sara; McCarty, Teresita

    2013-01-01

    The feedback sandwich technique-make positive comments; provide critique; end with positive comments-is commonly recommended to feedback givers despite scant evidence of its efficacy. These two studies (N = 20; N = 350) of written peer feedback with third-year medical students on clinical patient note-writing assignments indicate that students…

  9. Solitary fibrous tumor of the pleura.

    Science.gov (United States)

    Marak, Creticus P; Dorokhova, Olena; Guddati, Achuta K

    2013-01-01

    Solitary fibrous tumor of the pleura (SFTP) is a rare tumor of mesenchymal origin which can grow to a large size and present with symptoms of cough and pleuritic chest pain. No specific etiological factors for SFTPs are known and they may grow undetected for several years. These tumors are usually benign and may mimic a variety of malignancies. SFTPs are often detected as peripheral opacities on chest X-ray. Unfortunately, fine needle aspiration rarely provides adequate information for a definitive diagnosis. Imaging with computed tomography provides details about the size and extent of any invasion into adjacent tissues. Surgical resection is the mainstay of treatment, and immunohistochemistry of the resected tumor often provides confirmation of the diagnosis. Some SFTPs have been observed to be malignant, and surgical intervention is often lifesaving. There is no adequate data to support the usage of radiotherapy and chemotherapy in the treatment of SFTPs. This tumor exemplifies malignancies which require surgical resection to preempt worse outcomes. Awareness of their presentation and clinical course may help the clinician provide a prompt referral to the thoracic surgeon for resection.

  10. Treating Fibrous Insulation to Reduce Thermal Conductivity

    Science.gov (United States)

    Zinn, Alfred; Tarkanian, Ryan

    2009-01-01

    A chemical treatment reduces the convective and radiative contributions to the effective thermal conductivity of porous fibrous thermal-insulation tile. The net effect of the treatment is to coat the surfaces of fibers with a mixture of transition-metal oxides (TMOs) without filling the pores. The TMO coats reduce the cross-sectional areas available for convection while absorbing and scattering thermal radiation in the pores, thereby rendering the tile largely opaque to thermal radiation. The treatment involves a sol-gel process: A solution containing a mixture of transition-metal-oxide-precursor salts plus a gelling agent (e.g., tetraethylorthosilicate) is partially cured, then, before it visibly gels, is used to impregnate the tile. The solution in the tile is gelled, then dried, and then the tile is fired to convert the precursor salts to the desired mixed TMO phases. The amounts of the various TMOs ultimately incorporated into the tile can be tailored via the concentrations of salts in the solution, and the impregnation depth can be tailored via the viscosity of the solution and/or the volume of the solution relative to that of the tile. The amounts of the TMOs determine the absorption and scattering spectra.

  11. [Malignant fibrous histiocytoma of the penis].

    Science.gov (United States)

    Crisman, G; Margiotta, G; Calabresi, M; Discepoli, S; Leocata, P

    2015-07-01

    According to the most recent World Health Organization (WHO) guidelines a diagnosis of malignant fibrous histiocytoma (MFH) should be made only for lesions composed of tumor cells without evidence of a specific line of differentiation. This is therefore a diagnosis by exclusion which is why the name of undifferentiated high-grade pleomorphic sarcoma (UPS) should be preferred. Soft tissue sarcomas currently have an incidence in all body regions of approximately 20 cases per 1 million inhabitants per year. Soft tissue tumors of the penis represent approximately 5 % of all penile tumors and the incidence of penile sarcomas is estimated to be approximately 0.6-1 case per 100,000 patients. Only seven cases have so far been reported in the literature. This article describes the case of a 61-year-old Caucasian male who presented with a painless mass sited in the upper part of the corpus cavernosa. An incisional biopsy with a subsequent investigation using an extensive immunohistochemical panel were performed and a high-grade undifferentiated pleomorphic sarcoma or pleomorphic storiform MFH was diagnosed. In addition to the case report a literature review is presented to elaborate the discussion on the differential diagnoses of these kinds of lesions.

  12. Intracranial solitary fibrous tumor: Imaging findings

    Energy Technology Data Exchange (ETDEWEB)

    Clarencon, Frederic, E-mail: fredclare5@msn.com [Department of Neuroradiology, Pitie-Salpetriere Hospital, APHP, 75013 Paris (France); Bonneville, Fabrice [Department of Neuroradiology, Hopital Rangueil, Toulouse University Hospital, 31000 Toulouse (France); Rousseau, Audrey [Department of Neuropathology, Pitie-Salpetriere Hospital (France); Galanaud, Damien [Department of Neuroradiology, Pitie-Salpetriere Hospital, APHP, 75013 Paris (France); Kujas, Michele [Department of Neuropathology, Pitie-Salpetriere Hospital (France); Naggara, Olivier [Department of Neuroradiology, St Anne Hospital, 75014 Paris (France); Cornu, Philippe [Department of Neurosurgery, Pitie-Salpetriere Hospital (France); Chiras, Jacques [Department of Neuroradiology, Pitie-Salpetriere Hospital, APHP, 75013 Paris (France)

    2011-11-15

    Objective: To study the neuroimaging features of intracranial solitary fibrous tumors (ISFTs). Materials and methods: Retrospective study of neuroimaging features of 9 consecutive histopathologically proven ISFT cases. Location, size, shape, density, signal intensity and gadolinium uptake were studied at CT and MRI. Data collected from diffusion-weighted imaging (DWI) (3 patients), perfusion imaging and MR spectroscopy (2 patients), and DSA (4 patients) were also analyzed. Results: The tumors most frequently arose from the intracranial meninges (7/9), while the other lesions were intraventricular. Tumor size ranged from 2.5 to 10 cm (mean = 6.6 cm). They presented multilobular shape in 6/9 patients. Most ISFTs were heterogeneous (7/9) with areas of low T2 signal intensity that strongly enhanced after gadolinium administration (6/8). Erosion of the skull was present in about half of the cases (4/9). Components with decreased apparent diffusion coefficient were seen in 2/3 ISFTs on DWI. Spectroscopy revealed elevated peaks of choline and myo-inositol. MR perfusion showed features of hyperperfusion. Conclusion: ISFT should be considered in cases of extra-axial, supratentorial, heterogeneous, hypervascular tumor. Areas of low T2 signal intensity that strongly enhance after gadolinium injection are suggestive of this diagnosis. Restricted diffusion and elevated peak of myo-inositol may be additional valuable features.

  13. Reflective Coating on Fibrous Insulation for Reduced Heat Transfer

    Science.gov (United States)

    Hass, Derek D.; Prasad, B. Durga; Glass, David E.; Wiedemann, Karl E.

    1997-01-01

    Radiative heat transfer through fibrous insulation used in thermal protection systems (TPS) is significant at high temperatures (1200 C). Decreasing the radiative heat transfer through the fibrous insulation can thus have a major impact on the insulating ability of the TPS. Reflective coatings applied directly to the individual fibers in fibrous insulation should decrease the radiative heat transfer leading to an insulation with decreased effective thermal conductivity. Coatings with high infrared reflectance have been developed using sol-gel techniques. Using this technique, uniform coatings can be applied to fibrous insulation without an appreciable increase in insulation weight or density. Scanning electron microscopy, Fourier Transform infrared spectroscopy, and ellipsometry have been performed to evaluate coating performance.

  14. Fabrication of highly modulable fibrous 3D extracellular microenvironments

    KAUST Repository

    Zhang, Xixiang

    2017-06-13

    Three-dimensional (3D) in vitro scaffolds that mimic the irregular fibrous structures of in vivo extracellular matrix (ECM) are critical for many important biological applications. However, structural properties modulation of fibrous 3D scaffolds remains a challenge. Here, we report the first highly modulable 3D fibrous scaffolds self-assembled by high-aspect-ratio (HAR) microfibers. The scaffolds structural properties can be easily tailored to incorporate various physical cues, including geometry, stiffness, heterogeneity and nanotopography. Moreover, the fibrous scaffolds are readily and accurately patterned on desired locations of the substrate. Cell culture exhibits that our scaffolds can elicit strong bidirectional cell-material interactions. Furthermore, a functional disparity between the two-dimensional substrate and our 3D scaffolds is identified by cell spreading and proliferation data. These results prove the potential of the proposed scaffold as a biomimetic extracellular microenvironment for cell study.

  15. General Information about Osteosarcoma and Malignant Fibrous Histiocytoma of Bone

    Science.gov (United States)

    ... to the lung. Bone Metastasis or Bone with Lung Metastasis Osteosarcoma and malignant fibrous histiocytoma may spread to a distant bone and/or the lung. Treatment may include the following: Combination chemotherapy followed ...

  16. Treatment Option Overview (Osteosarcoma and Malignant Fibrous Histiocytoma of Bone)

    Science.gov (United States)

    ... to the lung. Bone Metastasis or Bone with Lung Metastasis Osteosarcoma and malignant fibrous histiocytoma may spread to a distant bone and/or the lung. Treatment may include the following: Combination chemotherapy followed ...

  17. MRI of fibrous cortical defect and non-ossifying fibroma

    Energy Technology Data Exchange (ETDEWEB)

    Mishima, Yoshiko; Aoki, Takatoshi; Watanabe, Hideyuki; Nakata, Hajime; Hashimoto, Hiroshi; Nakamura, Toshitaka [Univ. of Occupational and Environmental Health, Kitakyushu, Fukuoka (Japan). School of Medicine

    1999-02-01

    Fibrous cortical defect and non-ossifying fibroma are the benign fibrous lesions of bone commonly involving children. Their diagnosis is usually done with radiography, and MR examinations are rarely performed. We evaluated MRI findings of 11 lesions in 10 cases of fibrous cortical defect and non-ossifying fibroma. Signal intensity of the lesions was varied and large lesions (2 cm<) tended to show heterogeneous signal intensity on both T1-weighted and T2-weighted images corresponding to a mixture of components including fibrous tissue, hemosiderin and foam cells. MRI helps to delineate the extent of the involved bone and to assess the various histological components of the lesions. However, their diagnosis is basically made on the radiographic findings and the role of MRI is limited. (author)

  18. Ehlers-Danlos syndrome with monostotic fibrous dysplasia

    Directory of Open Access Journals (Sweden)

    Rao A

    1979-01-01

    Full Text Available An unusual case of Ehlers-Danlos syndrome with monostotic fibrous dysplasia of the humorus is presented. The other orthopae-dic manifestations, its complications and associated features are re-viewed and summarised.

  19. HYBRID-SANDWICHED REINFORCEMENT WITH GEOSYNTHETICS

    Science.gov (United States)

    Yasuhara, Kazuya; Yamazaki, Shinji; Sakakibara, Tsutomu

    Advantageous aspects of sandwich-type reinforced earth structures combined with geosynthetics and sand mat are highlighted in this paper. Those aspects were elucidated by two kinds of laboratory tests : (1) large consolidation tests for improvement of hydraulic conductivity and (2) model footing tests on improvement of bearing capacity and deformation characteristics for reinforced earth structures, including both vertical permeability and horizontal transmissibility characteristics of geosynthetics results from both laboratory tests indicated the following: i) Hydraulic conductivity of geosynthetics used for this type of earth reinforcement can be maintained for a long period. Such conductivity sometimes disappears, particularly because of clogging when geosynthetics are adopted in embankment construction using fine-grained soils. This fact indicates that the sand mats which are laid above and beneath geosynthetics play a salient role in preventing clogging of geosynthetics that occurs by intrusion of fines from cohesive soils. ii) Sandwich-type reinforcement combined with geosynthetics and sand mats increases stability and decreases deformation of earth structures. In particular, the sandwich structure is effective for providing toughness, which has remained an important issue for reducing infrastructural maintenance and costs. In the later part of the paper, conventionally available stability analysis was carried out to propose the design procedure for reinforced earth structures and at the same time numerical analysis was also conducted to ensure the applicability of the hybrid-sandwiched earth reinforcement newly proposed in the current paper. Finally, based on the horizontal placement by means of HBS described in the current paper, the vertical drain procedure using the sandwich structures for accelerating consolidation and increasing stability of soft soils is also suggested for the future research and investigation.

  20. Structural Analysis of Sandwich Foam Panels

    Energy Technology Data Exchange (ETDEWEB)

    Kosny, Jan [ORNL; Huo, X. Sharon [Tennessee Technological University

    2010-04-01

    The Sandwich Panel Technologies including Structural Insulated Panels (SIPs) can be used to replace the conventional wooden-frame construction method. The main purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and SGI Venture, Inc. was to design a novel high R-value type of metal sandwich panelized technology. This CRADA project report presents design concept discussion and numerical analysis results from thermal performance study of this new building envelope system. The main objective of this work was to develop a basic concept of a new generation of wall panel technologies which will have R-value over R-20 will use thermal mass to improve energy performance in cooling dominated climates and will be 100% termite resistant. The main advantages of using sandwich panels are as follows: (1) better energy saving structural panels with high and uniform overall wall R-value across the elevation that could not be achieved in traditional walls; and (2) reducing the use of raw materials or need for virgin lumber. For better utilization of these Sandwich panels, engineers need to have a thorough understanding of the actual performance of the panels and system. Detailed analysis and study on the capacities and deformation of individual panels and its assembly have to be performed to achieve that goal. The major project activity was to conduct structural analysis of the stresses, strains, load capacities, and deformations of individual sandwich components under various load cases. The analysis simulated the actual loading conditions of the regular residential building and used actual material properties of the steel facings and foam.

  1. Fibrous epulis associated with impacted lower right third molar

    Directory of Open Access Journals (Sweden)

    Ni Putu Mira Sumarta

    2009-12-01

    Full Text Available Background: Epulis or epulides are lesions associated with gingival tissues. Fibrous epulis is a type of hyperplastic fibrous tissue mass located at the gingival which is slow growing, painless, having same color as the oral mucosa and firm on palpation. Anterior regions of the oral cavity are the frequently affected sites as these areas are more prone to be affected by calculus deposition and poor plaque control due to frequent teeth malposition. Removal of any irritating factors and excision of the lesion are the usual treatments. Purpose: This case report presents a rare case of fibrous epulis which occurred in the posterior region of the oral cavity and associated with impacted lower third molar. Case: A case of fibrous epulis at the lower right third molar area of three months duration is presented. The mass was slow growing, painless and on examination it was a pedunculated mass overlying the unerupted lower right third molar, having same color with the oral mucosa and firm on palpation. Clinically, the lesion was diagnosed as fibrous epulis associated with impacted lower right third molar. Case management: The treatment were surgical excision of the epulis and removal of the lower right third molar. The histopathology result showed tissue with squamous epithelial lining, achanthotic fibrous connective tissue, mononuclear inflammatory cells and few capillaries without signs of malignancy. This is consistent with the diagnosis of fibrous epulis. Conclusion: Fibrous epulis, although frequently occurred at the anterior region of the oral cavity, may rarely grow at the area of lower third molar. This phenomenon supports the theory that epulis can grow on any surface of oral mucous membrane as long as local irritants are present.

  2. Effects of compression on the sound absorption of fibrous

    DEFF Research Database (Denmark)

    Castagnede, Bernard; Akninen, Achour; Brouard, Achour

    2000-01-01

    During the compression of a fibrous mat, it is well known that the absorption properties are decreasing. In order to predict this change, some heuristic formulae are proposed which take into account the modifications of the physical parameters(porosity, resistivity, tortousity and shappe factors)......) which enter in the standard "equivalent fluid" model. Numerical predictions are then discussed and compared to experimental data obtained on a fibrous material(uncompressed and the compressed) used in automotive industry....

  3. Simulation and Analysis of Unbonded Nonwoven Fibrous Structures

    Directory of Open Access Journals (Sweden)

    Behnam Pourdeyhimi

    2006-11-01

    Full Text Available In this work we report on our algorithm for generating 3-D virtual structures resembling un-bonded fibrous webs. The paper discusses short and infinitely long fibers, each emulating a category of nonwoven fibrous medium. The structure Solid Volume Fraction (SVF, being the most important characteristic of a fibrous porous medium, is calculated for different fiberwebs and discussed in details. It is shown that the SVF of the fibrous structures generated by our algorithm is independent of the basis weight. In other words, the porosity of the medium is only a function of the fiber properties – this is as expected. It is also demonstrated that by decreasing the fiber diameter while keeping other properties of the virtual fiberweb constant causes the SVF to decrease almost linearly. The same is not observed for the fiber rigidity. The capability of our algorithm for generating fibrous webs made up of layers of different fibers is demonstrated and their properties are discussed. The application of such virtual fibrous structures in modeling transport phenomena in nonwoven materials and their potential applications in load-deformation studies are discussed.

  4. The usefulness of nucleomedical procedures in diagnosis of fibrous dysplasia

    Energy Technology Data Exchange (ETDEWEB)

    Otsuka, Nobuaki; Fukunaga, Masao; Ono, Shimato (Kawasaki Medical School, Kurashiki, Okayama (Japan)) (and others)

    1989-09-01

    Bone scintigraphy with {sup 99m}Tc-phosphorous compounds and {sup 67}Ga scintigraphy were performed in 8 patients (monostotic 3 cases, polyostotic 5 cases) with fibrous dysplasia. The tendency toward abnormal accumulation of radioactivity on bone scintigraphy was high in the tibia, maxilla, mandibule and ribs. The characteristics of the scintigraphic image at the sites of bone lesion in fibrous dysplasia were judged to be marked (++), moderate (+) or poor or minimal (-), according to the degree of accumulation of radioactivity. Eleven sites of fibrous dysplasia showed marked accumulation and 5 sites showed moderate accumulation. Poor or minimal accumulation was not observed in any fibrous dysplasia lesions. Sclerotic changes on bone roentgenograms appeared as marked accumulation of radionuclides on bone scintigraphy in all cases. Cystic changes on roentgenograms showed a tendency toward moderate accumulation on scintigrams. {sup 67}Ga scans were also all positive for 2 experimental cases (3 sites) of bone lesions of fibrous dysplasia. Thus, bone and {sup 67}Ga scintigraphies appear to be useful and essential in evaluating the pathophysiology of fibrous dysplasia. (author).

  5. Effect of plastic deformation on the structure and mechanical properties of an ultra-low carbon interstitial-free steel in the monolithic material and as a component of a sandwich composite

    Science.gov (United States)

    Gladkovsky, S. V.; Kuteneva, S. V.; Kamantsev, I. S.; Sergeev, S. N.; Safarov, I. M.

    2016-10-01

    The structure and mechanical properties of ultra-low carbon interstitial-free (IF) steel in the annealed state, after warm and cold rolling, and as a component of seven-layer steel-aluminum composite have been studied. A comparative analysis of the results of structural studies using optical microscopy and scanning and transmission electron microscopy have revealed the possibility of the formation of an ultrafinegrained structure in a steel layer during rolling at temperatures ranging from room temperature to 520°C. It has been found that the seven-layer composite has higher strength properties as compared to monolithic samples of the IF steel after analogous regime of the warm rolling.

  6. Sandwiched Thin-Film Anode of Chemically Bonded Black Phosphorus/Graphene Hybrid for Lithium-Ion Battery.

    Science.gov (United States)

    Liu, Hanwen; Zou, Yuqin; Tao, Li; Ma, Zhaoling; Liu, Dongdong; Zhou, Peng; Liu, Hongbo; Wang, Shuangyin

    2017-09-01

    A facile vacuum filtration method is applied for the first time to construct sandwich-structure anode. Two layers of graphene stacks sandwich a composite of black phosphorus (BP), which not only protect BP from quickly degenerating but also serve as current collector instead of copper foil. The BP composite, reduced graphene oxide coated on BP via chemical bonding, is simply synthesized by solvothermal reaction at 140 °C. The sandwiched film anode used for lithium-ion battery exhibits reversible capacities of 1401 mAh g(-1) during the 200th cycle at current density of 100 mA g(-1) indicating superior cycle performance. Besides, this facile vacuum filtration method may also be available for other anode material with well dispersion in N-methyl pyrrolidone (NMP). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Electrochemical Tailoring of Fibrous Polyaniline and Electroless Decoration with Gold and Platinum Nanoparticles.

    Science.gov (United States)

    Abdelhamid, Muhammad E; Snook, Graeme A; O'Mullane, Anthony P

    2016-09-06

    Presented in this work is a facile and quick electrochemical method for controlling the morphology of thick polyaniline (PANi) films, without the use of templates. By stepping the polymerization potential from high voltages to a lower (or series of lower) voltage(s), we successfully controlled the morphology of the polymer, and fibrous structures, unique to each potential step, were achieved. In addition, the resultant film was tested electrochemically for its viability as an electrode material for flexible batteries and supercapacitors. Furthermore, the PANi film was decorated with gold and platinum nanoparticles via an electroless deposition process for possible electrocatalytic applications, whereby the oxidation of hydrazine at the composite was investigated.

  8. Clinicopathological analysis of solitary fibrous tumor

    Institute of Scientific and Technical Information of China (English)

    Xiumei Zhang; Hai Wang; Shujing Wang; Jinfeng Miao; Zhengai Piao; Yingying Dong

    2012-01-01

    Objective: The aim of this study was to investigate the clinicopathologic characteristics, diagnosis and differential diagnosis, molecular genetics, treatment and prognosis of solitary fibrous tumor (SFT). Methods: The clinicopathological manifestations were analyzed retrospectively in 22 patients with surgically confirmed SFT. Results: There were 12 male patients and 10 female patients, with the age range 33–67 (mean 48.62) years. The SFTs originated from different from parts of the body, including 13 in the chest, 2 in the lungs, 3 in the abdomen, 1 in the lumbosacral area, 2 in the pelvis, and 1 in the left shoulder. There were 19 benign and 3 malignant tumors. Major clinical presentations were local masses and compression symptoms. Microscopy: the tumor was composed of areas of alternating hypercellularity and hypocellularity. The tumor cells were spindle to short-spindle shaped and arranged in fascicular or storiform pattern and hemangiopericytoma-like structure was presented. Immunohistochemically, Vimentin positive rate was 100% (22/22), Bcl-2 positive rate was 95.5% (21/22), CD99 positive rate was 86.4% (19/22), CD34 positive rate was 81.8 (18/22), focally positive for P53, as well as negative CK, S100 and Desmin. Ki67 labelling index was 2%–30%. Conclusion: SFT is a rare tumor which may be found in various parts of human body. SFT mostly is a benign tumor, but a few could be malignant. Its diagnosis mainly rely on its morphologic features and immunohistochemical profiles. The major treatment is to completely resect it by operation and long-term clinical follow-up is necessary.

  9. Gene expression profiling of solitary fibrous tumors.

    Directory of Open Access Journals (Sweden)

    François Bertucci

    Full Text Available BACKGROUND: Solitary fibrous tumors (SFTs are rare spindle-cell tumors. Their cell-of-origin and molecular basis are poorly known. They raise several clinical problems. Differential diagnosis may be difficult, prognosis is poorly apprehended by histoclinical features, and no effective therapy exists for advanced stages. METHODS: We profiled 16 SFT samples using whole-genome DNA microarrays and analyzed their expression profiles with publicly available profiles of 36 additional SFTs and 212 soft tissue sarcomas (STSs. Immunohistochemistry was applied to validate the expression of some discriminating genes. RESULTS: SFTs displayed whole-genome expression profiles more homogeneous and different from STSs, but closer to genetically-simple than genetically-complex STSs. The SFTs/STSs comparison identified a high percentage (∼30% of genes as differentially expressed, most of them without any DNA copy number alteration. One of the genes most overexpressed in SFTs encoded the ALDH1 stem cell marker. Several upregulated genes and associated ontologies were also related to progenitor/stem cells. SFTs also overexpressed genes encoding therapeutic targets such as kinases (EGFR, ERBB2, FGFR1, JAK2, histone deacetylases, or retinoic acid receptors. Their overexpression was found in all SFTs, regardless the anatomical location. Finally, we identified a 31-gene signature associated with the mitotic count, containing many genes related to cell cycle/mitosis, including AURKA. CONCLUSION: We established a robust repertoire of genes differentially expressed in SFTs. Certain overexpressed genes could provide new diagnostic (ALDH1A1, prognostic (AURKA and/or therapeutic targets.

  10. A call to expand regulation to all carcinogenic fibrous minerals

    Science.gov (United States)

    Baumann, F.; Steele, I.; Ambrosi, J.; Carbone, M.

    2013-05-01

    The regulatory term "asbestos" groups only the six fibrous minerals that were commercially used among approximately 400. The carcinogenicity of these six regulated minerals has been largely demonstrated and is related to fiber structure, fiber length/diameter ratio, and bio-persistence. From a public perception, the generic term "asbestos" refers to the fibrous minerals that cause asbestosis, mesothelioma and other cancers. However, other non-regulated fibrous minerals are potentially as dangerous as the regulatory asbestos because they share similar physical and chemical properties, epidemiological studies have demonstrated their relationship with asbestos-related diseases, and both in vitro and in vivo experiments have established the toxicity of these minerals. For example, the non-regulated asbestiform winchite and richterite minerals that contaminated the vermiculite mined from Libby, Montana, (USA) were associated with mesothelioma, lung cancer and asbestosis observed among the area's residents and miners. Many other examples of non-regulated carcinogenic fibrous minerals include, but are not limited to, antigorite, arfvedsonite, balangeroite, carlosturanite, erionite, fluoro-edenite, hornblende, mordenite, palygorskite, and sepiolite. To propose a regulatory definition that would provide protection from all carcinogenic fibers, we have conducted an interdisciplinary literature review to compare the characteristics of "asbestos" and of non-regulated mineral fibers that relate to carcinogenicity. We specifically studied two non-regulated fibrous minerals that are associated with asbestos-related diseases: the serpentine antigorite and the zeolite erionite. Both examples underscore the problem of regulation based on commercial, rather than scientific principles: 1) the occurrence of fibrous antigorite in materials used to pave roads has been correlated with high mesothelioma rates in New Caledonia. Antigorite was also the cause of asbestosis in Poland, and in

  11. Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades

    DEFF Research Database (Denmark)

    Leong, Martin Klitgaard; Overgaard, Lars C. T.; Thomsen, Ole Thybo

    2012-01-01

    Wrinkle defects can be formed during the production of wind turbine blades consisting of composite monolithic and sandwich laminates. Earlier studies have shown that the in-plane compressive strength of a sandwich panel with wrinkle defects may decrease dramatically. This study focuses on the fai......Wrinkle defects can be formed during the production of wind turbine blades consisting of composite monolithic and sandwich laminates. Earlier studies have shown that the in-plane compressive strength of a sandwich panel with wrinkle defects may decrease dramatically. This study focuses...... on the failure modes of sandwich specimens consisting of thick GFRP face sheets with a wrinkle defect and a balsa wood core subjected to in-plane compression loading. Three distinct modes of failure were found, and the strain distributions leading up to these failures were established by use of digital image...... correlation (DIC). Finite element analyses were subsequently conducted to model the response of the test specimens prior to failure, and generally a very good agreement was found with the DIC measurements, although slight differences between the predicted and measured strain fields were observed in the local...

  12. High-Fidelity Modeling for Health Monitoring in Honeycomb Sandwich Structures

    Science.gov (United States)

    Luchinsky, Dimitry G.; Hafiychuk, Vasyl; Smelyanskiy, Vadim; Tyson, Richard W.; Walker, James L.; Miller, Jimmy L.

    2011-01-01

    High-Fidelity Model of the sandwich composite structure with real geometry is reported. The model includes two composite facesheets, honeycomb core, piezoelectric actuator/sensors, adhesive layers, and the impactor. The novel feature of the model is that it includes modeling of the impact and wave propagation in the structure before and after the impact. Results of modeling of the wave propagation, impact, and damage detection in sandwich honeycomb plates using piezoelectric actuator/sensor scheme are reported. The results of the simulations are compared with the experimental results. It is shown that the model is suitable for analysis of the physics of failure due to the impact and for testing structural health monitoring schemes based on guided wave propagation.

  13. Antibacterial activities of surface modified electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) fibrous membranes

    Science.gov (United States)

    Yao, Chen; Li, Xinsong; Neoh, K. G.; Shi, Zhilong; Kang, E. T.

    2009-01-01

    Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) membrane, with its excellent chemical and mechanical properties, has good potential for broad applications. However, due to its hydrophobic nature, microbial colonization is commonly encountered. In this work, electrospun PVDF-HFP fibrous membranes were surface modified by poly(4-vinyl- N-alkylpyridinium bromide) to achieve antibacterial activities. The membranes were first subjected to plasma pretreatment followed by UV-induced surface graft copolymerization of 4-vinylpyridine (4VP) and quaternization of the grafted pyridine groups with hexylbromide. The chemical composition of the surface modified PVDF-HFP electrospun membranes was studied by X-ray photoelectron spectroscopy (XPS). The morphology and mechanical properties of pristine and surface modified PVDF-HFP fibrous membranes were characterized by scanning electron microscopy (SEM) and tensile test, respectively. The antibacterial activities of the modified electrospun PVDF-HFP fibrous membranes were assessed against Gram-positive Staphylococcus aureus ( S. aureus) and Gram-negative Escherichia coli ( E. coli). The results showed that the PVDF-HFP fibrous membranes modified with quaternized pyridinium groups are highly effective against both bacteria with killing efficiency as high as 99.9999%.

  14. Antibacterial activities of surface modified electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) fibrous membranes

    Energy Technology Data Exchange (ETDEWEB)

    Yao Chen [School of Chemistry and Chemical Engineering, Southeast University, Sipailou 2, Nanjing 210018 (China); Department of Chemical and Biomolecular Engineering, National University of Singapore, Kent, Ridge, 119260 Singapore (Singapore); Li Xinsong [School of Chemistry and Chemical Engineering, Southeast University, Sipailou 2, Nanjing 210018 (China)], E-mail: lixs@seu.edu.cn; Neoh, K.G. [Department of Chemical and Biomolecular Engineering, National University of Singapore, Kent, Ridge, 119260 Singapore (Singapore)], E-mail: chenkg@nus.edu.sg; Shi Zhilong; Kang, E.T. [Department of Chemical and Biomolecular Engineering, National University of Singapore, Kent, Ridge, 119260 Singapore (Singapore)

    2009-01-01

    Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) membrane, with its excellent chemical and mechanical properties, has good potential for broad applications. However, due to its hydrophobic nature, microbial colonization is commonly encountered. In this work, electrospun PVDF-HFP fibrous membranes were surface modified by poly(4-vinyl-N-alkylpyridinium bromide) to achieve antibacterial activities. The membranes were first subjected to plasma pretreatment followed by UV-induced surface graft copolymerization of 4-vinylpyridine (4VP) and quaternization of the grafted pyridine groups with hexylbromide. The chemical composition of the surface modified PVDF-HFP electrospun membranes was studied by X-ray photoelectron spectroscopy (XPS). The morphology and mechanical properties of pristine and surface modified PVDF-HFP fibrous membranes were characterized by scanning electron microscopy (SEM) and tensile test, respectively. The antibacterial activities of the modified electrospun PVDF-HFP fibrous membranes were assessed against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). The results showed that the PVDF-HFP fibrous membranes modified with quaternized pyridinium groups are highly effective against both bacteria with killing efficiency as high as 99.9999%.

  15. Design of an electro-Fenton system with a novel sandwich film cathode for wastewater treatment.

    Science.gov (United States)

    Fan, Yan; Ai, Zhihui; Zhang, Lizhi

    2010-04-15

    In this study, we demonstrate an electro-Fenton (E-Fenton) system constructed with a novel sandwich film cathode (SFC). For the fabrication of SFC, Fe(2+)-chitosan (Fe-CHI) was first deposited on foam nickel (Fe-CHI/Ni). Then two pieces of Fe-CHI/Ni was used to fasten one piece of activated carbon fiber (ACF) to obtain a Fe-CHI/Ni|ACF|Fe-CHI/Ni sandwich film cathode. We interestingly found that this SFC based E-Fenton system could effectively degrade rodamine B with in situ generating both hydrogen peroxide and iron ions. Its degradation efficiency was significantly higher than those of the E-Fenton systems constructed with composite cathodes of carbon nanotubes with Fe@Fe(2)O(3) core-shell nanowires or Cu(2)O nanocubes reported in our previous studies. Hydrogen peroxide electrogenerated through the reduction of O(2) adsorbed on the sandwich film cathode and the iron ions produced by the leakage from Fe(2+)-chitosan film during the E-Fenton reaction were, respectively, monitored, providing clues to understand the high efficiency of this novel SFC based E-Fenton system. More importantly, this low-cost sandwich film cathode was very stable and could be reused without catalytic activity decrease, suggesting its potential application in the wastewater treatment.

  16. Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Zaid N.Z.M.

    2016-01-01

    Full Text Available The failure modes occurring in sandwich panels based on the corrugations of aluminium alloy, carbon fibre-reinforced plastic (CFRP and glass fibre-reinforced plastic (GFRP are analysed in this work. The fracture behaviour of these sandwich panels under compressive stresses is determined through a series of uniform lateral compression performed on samples with different cell wall thicknesses. Compression test on the corrugated-core sandwich panels were conducted using an Instron series 4505 testing machine. The post-failure examinations of the corrugated-core in different cell wall thickness were conducted using optical microscope. Load-displacement graphs of aluminium alloy, GFRP and CFRP specimens were plotted to show progressive damage development with five unit cells. Four modes of failure were described in the results: buckling, hinges, delamination and debonding. Each of these failure modes may dominate under different cell wall thickness or loading condition, and they may act in combination. The results indicate that thicker composites corrugated-core panels tend can recover more stress and retain more stiffness. This analysis provides a valuable insight into the mechanical behaviour of corrugated-core sandwich panels for use in lightweight engineering applications.

  17. On the Milnor fibers of sandwiched singularities

    CERN Document Server

    Nemethi, Andras

    2009-01-01

    The sandwiched surface singularities are those rational surface singularities which dominate birationally smooth surface singularities. de Jong and van Straten showed that one can reduce the study of the deformations of a sandwiched surface singularity to the study of deformations of a 1-dimensional object, a so-called decorated plane curve singularity. In particular, the Milnor fibers corresponding to their various smoothing components may be reconstructed up to diffeomorphisms from those deformations of associated decorated curves which have only ordinary singularities. Part of the topology of such a deformation is encoded in the incidence matrix between the irreducible components of the deformed curve and the points which decorate it, well-defined up to permutations of columns. Extending a previous theorem ofours, which treated the case of cyclic quotient singularities, we show that the Milnor fibers which correspond to deformations whose incidence matrices are different up to permutations of columns are n...

  18. Utilization of Bamboo as Lightweight Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Suthon SRIVARO

    2016-05-01

    Full Text Available Lightweight sandwich panels consisting of bamboo faces and oil palm trunk core were manufactured using melamine urea formaldehyde with the resin content of 250 g/m2 (solid basis. The parameters examined were node and density of bamboo faces. Physical (board density, thickness swelling and water absorption and mechanical (modulus of elasticity and modulus of rupture properties of the sandwich board obtained were investigated and compared with other bamboo products and commercial wood based products. Result showed that this panel had better dimensional stability than those of other bamboo products but lower bending strength. Node of bamboo had no significant effect on any board properties examined. Most of board properties were influenced by bamboo face density. Comparing the properties to commercial wood based products, this panel could be used as wall/floor applications.

  19. Ultrasonic Spectroscopy of Stainless Steel Sandwich Panels

    Science.gov (United States)

    Cosgriff, Laura M.; Lerch, Bradley A.; Hebsur, Mohan G.; Baaklini, George Y.; Ghosn, Louis J.

    2003-01-01

    Enhanced, lightweight material systems, such as 17-4PH stainless steel sandwich panels are being developed for use as fan blades and fan containment material systems for next generation engines. In order to improve the production for these systems, nondestructive evaluation (NDE) techniques, such as ultrasonic spectroscopy, are being utilized to evaluate the brazing quality between the 17-4PH stainless steel face plates and the 17-4PH stainless steel foam core. Based on NDE data, shear tests are performed on sections representing various levels of brazing quality from an initial batch of these sandwich structures. Metallographic characterization of brazing is done to corroborate NDE findings and the observed shear failure mechanisms.

  20. Buckling optimisation of sandwich cylindrical panels

    Science.gov (United States)

    Abouhamzeh, M.; Sadighi, M.

    2016-06-01

    In this paper, the buckling load optimisation is performed on sandwich cylindrical panels. A finite element program is developed in MATLAB to solve the governing differential equations of the global buckling of the structure. In order to find the optimal solution, the genetic algorithm Toolbox in MATLAB is implemented. Verifications are made for both the buckling finite element code and also the results from the genetic algorithm by comparisons to the results available in literature. Sandwich cylindrical panels are optimised for the buckling strength with isotropic or orthotropic cores with different boundary conditions. Results are presented in terms of stacking sequence of fibers in the face sheets and core to face sheet thickness ratio.