Secondary Creep Response of Hand Lay-Up GRP Composites ...

African Journals Online (AJOL)

Glass Reinforced Plastics (GRP) composite load bearing components are now in common use, quite often at temperatures above the ambient, where creep behaviour may be significant, as in pressurized industrial containers. This is especially true of those composites produced by the Hand Lay-Up Contact Moulding ...

Effects of Constituents and Lay-up Configuration on Drop-Weight Tests of Fiber-Metal Laminates

Science.gov (United States)

Liu, Yanxiong; Liaw, Benjamin

2010-02-01

Impact responses and damage of various fiber-metal laminates were studied using a drop-weight instrument with the post-impact damage characteristics being evaluated through ultrasonic and mechanical sectioning techniques. The first severe failure induced by the low-velocity drop-weight impact occurred as delamination between the aluminum and fiber-epoxy layers at the non-impact side. It was followed by a visible shear crack in the outer aluminum layer on the non-impact face. Through-thickness shear cracks in the aluminum sheets and severe damage in the fiber laminated layers (including delamination between adjacent fiber-epoxy laminae with different fiber orientations) developed under higher energy impacts. The impact properties of fiber-metal laminates varied with different constituent materials and fiber orientations. Since it was punched through easily, the aramid-fiber reinforced fiber-metal laminates (ARALL) offered poorer impact resistance than the glass-fiber reinforced fiber-metal laminates (GLARE). Tougher and more ductile aluminum alloys improved the impact resistance. GLARE made of cross-ply prepregs provided better impact resistance than GLARE with unidirectional plies.

Complete Genome Sequence of Gallibacterium anatis Strain UMN179, Isolated from a Laying Hen with Peritonitis ▿

OpenAIRE

Johnson, Timothy J.; Fernandez-Alarcon, Claudia; Bojesen, Anders Miki; Nolan, Lisa K.; Trampel, Darrell W.; Seemann, Torsten

2011-01-01

Gallibacterium anatis is a member of the normal flora of avian hosts and an important causative agent of peritonitis and salpingitis in laying hens. Here we report the availability of the first completed G. anatis genome sequence of strain UMN179, isolated from an Iowa laying hen with peritonitis.

Complete Genome Sequence of Gallibacterium anatis Strain UMN179, Isolated from a Laying Hen with Peritonitis ▿

Science.gov (United States)

Johnson, Timothy J.; Fernandez-Alarcon, Claudia; Bojesen, Anders Miki; Nolan, Lisa K.; Trampel, Darrell W.; Seemann, Torsten

2011-01-01

Gallibacterium anatis is a member of the normal flora of avian hosts and an important causative agent of peritonitis and salpingitis in laying hens. Here we report the availability of the first completed G. anatis genome sequence of strain UMN179, isolated from an Iowa laying hen with peritonitis. PMID:21602325

Experimental Strength of Single-Lap Hybrid Joints on Woven Fabric Kenaf Fiber Composites Under Quasi Static Condition

Directory of Open Access Journals (Sweden)

Yee Lee Sim

2016-01-01

Full Text Available For the past decades, usage of natural fiber reinforced composites in low bearing load applications are increasing tremendously due to drawbacks concerning the use of synthetic fibers. Kenaf fibers have a good potential to be used as composite reinforcements as they possesses excellent fiber strength compared to own self-weight. Current work concentrates on mechanical properties of woven fabric kenaf composites with single-lap hybrid joints configurations. Four width to diameter ratio, (W/d of cross-ply lay-up joints as designed in testing series were tested by using quasi static mechanical testing. Experimental results showed that the failure load increased with the increasing of W/d ratios. Thinner lay-up had better bearing strength compared to thicker lay-up as found in current study.

Review of Tank Lay-Up Status at US Department of Energy Radioactive Waste Tank Sites

International Nuclear Information System (INIS)

Elmore, Monte R.; Henderson, Colin

2002-01-01

During fiscal year (FY) 2001 as part of a Tanks Focus Area strategic initiative, tank lay-up options were developed and evaluated for the two high-level waste (HLW) storage tanks at the West Valley Demonstration Project. As follow-on task, a list of key waste tank contacts throughout the US Department of Energy complex was developed. Visits were then made to the primary DOE sites with radioactive waste storage tanks to discuss the concept and applicability of tank lay-up. This report documents the results of individual discussions with tank closure staff at the four DOE Sites concerning tank closure status and plans as well as lay-up options and activities

Analytical investigation of the hygrothermal effects and parametric study of the Edge Crack Torsion (ECT) mode 3 test lay-ups

Science.gov (United States)

Li, Jian; Obrien, T. Kevin

1995-01-01

A shear deformation theory including residual thermal and moisture effects is developed for the analysis of either symmetric or unsymmetric laminates with mid-plane edge delamination under torsion loading. The theory is based on an assumed displacement field which includes shear deformation. The governing equations and boundary conditions are obtained from the principle of virtual work. The analysis of the (90/(+/- 45)(n)/(-/+ 45)(n)/90)(s) ECT mode 3 test lay-up indicates that there are no hygrothermal effects on the mode 3 strain energy release rate because the laminate, and both sublaminates above and below the delamination, are symmetric lay-ups. A further parametric study reveals that some other lay-ups can have negligible hygrothermal effects even when the sublaminates above and below the delamination are not symmetric about their own mid-planes. However, these lay-ups may suffer from distortion after the curing process. Another Interesting set of lay-ups investigated is a class of antisymmetric laminates with (+/-(theta/(theta -90)(2)/theta))(n) lay-ups. It is observed that when n takes on even numbers (2 and 4), both hygrothermal and mode 1 effects can be neglected. From this point of view, these lay-ups provide a way to determine the mode 3 toughness between two dissimilar layers. However, when n takes on odd numbers (1 and 3), both hygrothermal and mode 1 effects may be strong in these lay-ups. In particular, when theta equals 45 deg, the lay-ups are free from both hygrothermal and mode 1 effects irrespective of n.

Composite lay-up process with application of elements of augmented reality

Science.gov (United States)

Novák-Marcinčin, Jozef; Barna, Jozef; Janák, Miroslav; Fečová, Veronika; Nováková-Marcinčinová, L'udmila

2012-03-01

This article deals with virtual tools based on principles of open source philosophy in implementation area of composite lay-up technology. It describes virtual software and hardware elements that are necessary for work in augmented reality environment. In the beginning it focuses on general problems of applications of virtual components and in composite lay-up process. It clarifies the fundamental philosophy of new created application and the process called visual scripting that was used for program development. Further it provides closer view on particular logical sections, where necessary data are harvested and compared with values from virtual arrays. Also the new device is described with adjustment of operating desk, what enables detailed control of any realized manufacturing process. This positioning table can determine and set the position of the working plane using the commands in computer interface or manual changes. Information about exact position of individual layers are obtained in real time thanks to the built-in sensors. One of them manages the data change of the desk position (X, Y, Z), other checks the rotation around main axis situated in the center of the table. New software consists of 4 main logical areas with data packets comming from internal computer components as well as from external devices. In the end the displaying section is able to realize the movement process of virtual item (composite layer) according to its trajectory. Article presents new attitude in realization of composite lay-up process. Finally it deals with possible future improvements and other application possibilities.

Characterization of expressed sequence tags from developing fibers of Gossypium barbadense and evaluation of insertion-deletion variation in tetraploid cultivated cotton species.

Science.gov (United States)

Lv, Yuanda; Zhao, Liang; Xu, Xiaoyang; Wang, Lei; Wang, Cheng; Zhang, Tianzhen; Guo, Wangzhen

2013-03-13

Cotton is the leading fiber crop worldwide. Gossypium barbadense is an important species of cotton because of its extra-long staple fibers with superior luster and silkiness. However, a systematic analysis and utilization of cDNA sequences from G. barbadense fiber development remains understudied. A total of 21,079 high quality sequences were generated from two non-normalized cDNA libraries prepared by using a mixture of G. barbadense Hai7124 fibers and ovules. After assembly processing, a set of 8,653 unigenes were obtained. Of those, 7,786 were matched to known proteins and 7,316 were assigned to functional categories. The molecular functions of these unigenes were mostly related to binding and catalytic activity, and carbohydrate, amino acid, and energy metabolisms were major contributors among the subsets of metabolism. Sequences comparison between G. barbadense and G. hirsutum revealed that 8,245 unigenes from G. barbadense were detected the similarity with those released publicly in G. hirsutum, however, the remaining 408 sequences had no hits against G. hirsutum unigenes database. Furthermore, 13,275 putative ESTs InDels loci involved in the orthologous and/or homoeologous differences between/within G. barbadense and G. hirsutum were discovered by in silico analyses, and 2,160 InDel markers were developed by ESTs with more than five insertions or deletions. By gel electrophoresis combined with sequencing verification, 71.11% candidate InDel loci were reconfirmed orthologous and/or homoeologous loci polymorphisms using G. hirsutum acc TM-1 and G. barbadense cv Hai7124. Blastx result showed among 2,160 InDel loci, 81 with significant function similarity with known genes associated with secondary wall synthesis process, indicating the important roles in fiber quality in tetraploid cultivated cotton species. Sequence comparisons and InDel markers development will lay the groundwork for promoting the identification of genes related to superior agronomic traits

Basketball lay-up - foot loading characteristics and the number of trials necessary to obtain stable plantar pressure variables.

Science.gov (United States)

Chua, YaoHui K; Quek, Raymond K K; Kong, Pui W

2017-03-01

This study aimed (1) to profile the plantar loading characteristics when performing the basketball lay-up in a realistic setting and (2) to determine the number of trials necessary to establish a stable mean for plantar loading variables during the lay-up. Thirteen university male basketball players [age: 23.0 (1.4) years, height: 1.75 (0.05) m, mass: 68.4 (8.6) kg] performed ten successful basketball lay-ups from a stationary position. Plantar loading variables were recorded using the Novel Pedar-X in-shoe system. Loading variables including peak force, peak pressure, and pressure-time integral were extracted from eight foot regions. Performance stability of plantar loading variables during the take-off and landing steps were assessed using the sequential averaging technique and intra-class correlation coefficient (ICC). High plantar loadings were experienced at the heel during the take-off steps, and both the heel and forefoot regions upon landing. The sequential estimation technique revealed a five-eight trial range to achieve a stable mean across all plantar loading variables, whereas ICC analysis was insensitive to inter-trial differences of repeated lay-up performances. Future studies and performance evaluation protocols on plantar loading during basketball lay-ups should include at least eight trials to ensure that the measurements obtained are sufficiently stable.

Reaction kinetics of hydrazine neutralization in steam generator wet lay-up solution: Identifying optimal degradation conditions

International Nuclear Information System (INIS)

Schildermans, Kim; Lecocq, Raphael; Girasa, Emmanuel

2012-09-01

During a nuclear power plant outage, hydrazine is used as an oxygen scavenger in the steam generator lay-up solution. However, due to the carcinogenic effects of hydrazine, more stringent discharge limits are or will be imposed in the environmental permits. Hydrazine discharge could even be prohibited. Consequently, hydrazine alternatives or hydrazine degradation before discharge is needed. This paper presents the laboratory tests performed to characterize the reaction kinetics of hydrazine neutralization using bleach or hydrogen peroxide, catalyzed with either copper sulfate (CuSO 4 ) or potassium permanganate (KMnO 4 ). The tests are performed on two standard steam generator lay-up solutions based on different pH control agents: ammonia or ethanolamine. Different neutralization conditions are tested by varying temperature, oxidant addition, and catalyst concentration, among others, in order to identify the optimal parameters for hydrazine neutralization in a steam generator wet lay-up solution. (authors)

Characterization and morphological properties of glass fiber ...

African Journals Online (AJOL)

Characterization and morphological properties of glass fiber reinforced epoxy composites fabricated under varying degrees of hand lay-up techniques. ... Hence, these composites are projected to possess better dimensional stability adaptable for high performance structural applications. Keywords: composite, interfacial ...

Identification and differential expression of microRNAs in ovaries of laying and Broody geese (Anser cygnoides by Solexa sequencing.

Directory of Open Access Journals (Sweden)

Qi Xu

Full Text Available BACKGROUND: Recent functional studies have demonstrated that the microRNAs (miRNAs play critical roles in ovarian gonadal development, steroidogenesis, apoptosis, and ovulation in mammals. However, little is known about the involvement of miRNAs in the ovarian function of fowl. The goose (Anas cygnoides is a commercially important food that is cultivated widely in China but the goose industry has been hampered by high broodiness and poor egg laying performance, which are influenced by ovarian function. METHODOLOGY/PRINCIPAL FINDINGS: In this study, the miRNA transcriptomes of ovaries from laying and broody geese were profiled using Solexa deep sequencing and bioinformatics was used to determine differential expression of the miRNAs. As a result, 11,350,396 and 9,890,887 clean reads were obtained in laying and broodiness goose, respectively, and 1,328 conserved known miRNAs and 22 novel potential miRNA candidates were identified. A total of 353 conserved microRNAs were significantly differentially expressed between laying and broody ovaries. Compared with miRNA expression in the laying ovary, 127 miRNAs were up-regulated and 126 miRNAs were down-regulated in the ovary of broody birds. A subset of the differentially expressed miRNAs (G-miR-320, G-miR-202, G-miR-146, and G-miR-143* were validated using real-time quantitative PCR. In addition, 130,458 annotated mRNA transcripts were identified as putative target genes. Gene ontology annotation and KEGG (Kyoto Encyclopedia of Genes and Genomes pathway analysis suggested that the differentially expressed miRNAs are involved in ovarian function, including hormone secretion, reproduction processes and so on. CONCLUSIONS: The present study provides the first global miRNA transcriptome data in A. cygnoides and identifies novel and known miRNAs that are differentially expressed between the ovaries of laying and broody geese. These findings contribute to our understanding of the functional involvement of mi

Effect of feeding low-fiber fraction of air-classified sunflower (Helianthus annus L.) meal on laying hen productive performance and egg yolk cholesterol.

Science.gov (United States)

Laudadio, V; Ceci, E; Lastella, N M B; Tufarelli, V

2014-11-01

The present study was designed to determine the effect on laying performance and egg quality resulting from total substitution of soybean meal (SBM) with low-fiber sunflower meal (SFM; Helianthus annus L.) meal in diet of hens. ISA Brown layers, 28 wk of age, were randomly allocated to 2 dietary treatments and fed for 10 wk. The hens were kept in a free-range environment and fed 2 wheat middling-based diets consisting of a control diet, which contained SBM (153 g/kg of diet), and a test diet containing low-fiber SFM (160 g/kg of diet) as the main protein source. Each dietary treatment was replicated 4 times. Low-fiber SFM was obtained by a combination of sieving and air classification processes. Feed consumption was recorded daily and egg production was calculated on a hen-day basis; eggs from each group were collected weekly to evaluate egg components and quality. The total substitution of SBM with low-fiber SFM had no adverse effect on growth performance of laying hens. Egg production and none of egg quality traits examined were influenced by dietary treatment, except for yolk color (P eggs (P egg yolk total cholesterol and low-density lipoprotein cholesterol concentrations (P egg quality and to develop low-cholesterol eggs. ©2014 Poultry Science Association Inc.

Influence of locational states of submicron fibers added into matrix on mechanical properties of plain-woven Carbon Fiber Composite

Directory of Open Access Journals (Sweden)

Kumamoto Soichiro

2016-01-01

Full Text Available The aim of this study was to show the influence of locational states of submicron fibers added into epoxy matrix on mechanical properties of modified plane-woven carbon fiber reinforced plastic (CFRP. To change the locational states of submicron fibers, two kinds of fabrication processes were applied in preparing specimen by hand lay-up method. Submicron fibers were simply added into epoxy resin with ethanol after they were stirred by a dispersion process using homogenizer to be located far from the interface between reinforcement and matrix. In contrast, submicron fibers were attached onto the carbon fibers by injecting from a spray nozzle accompanying with ethanol to be located near the interface, after they were tentatively contained in ethanol. The plain-woven CFRP plates were fabricated by hand lay-up method and cured at 80 degree-C for 1 hour and then at 150 degree-C for 3 hours. After curing, the plain-woven CFRP plates were cut into the dimension of specimen. Tensile shear strength and Mode-II fracture toughness of CFRP were determined by tensile lap-shear test and End-notched flexure(ENF test, respectively. When submicron fibers were located far from the interface between carbon fibers and epoxy resin, tensile shear strength and Mode-II fracture toughness of CFRP were improved 30% and 18% compared with those of unmodified case. The improvement ratio in modified case was rather low (about few percentages in the case where submicron fibers were located near the interface. The result suggested that crack propagation should be prevented when submicron fibers were existed far from the interface due to the effective stress state around the crack tip.

Effect of laying sequence on egg mercury in captive zebra finches: an interpretation considering individual variation.

Science.gov (United States)

Ou, Langbo; Varian-Ramos, Claire W; Cristol, Daniel A

2015-08-01

Bird eggs are used widely as noninvasive bioindicators for environmental mercury availability. Previous studies, however, have found varying relationships between laying sequence and egg mercury concentrations. Some studies have reported that the mercury concentration was higher in first-laid eggs or declined across the laying sequence, whereas in other studies mercury concentration was not related to egg order. Approximately 300 eggs (61 clutches) were collected from captive zebra finches dosed throughout their reproductive lives with methylmercury (0.3 μg/g, 0.6 μg/g, 1.2 μg/g, or 2.4 μg/g wet wt in diet); the total mercury concentration (mean ± standard deviation [SD] dry wt basis) of their eggs was 7.03 ± 1.38 μg/g, 14.15 ± 2.52 μg/g, 26.85 ± 5.85 μg/g, and 49.76 ± 10.37 μg/g, respectively (equivalent to fresh wt egg mercury concentrations of 1.24 μg/g, 2.50 μg/g, 4.74 μg/g, and 8.79 μg/g). The authors observed a significant decrease in the mercury concentration of successive eggs when compared with the first egg and notable variation between clutches within treatments. The mercury level of individual females within and among treatments did not alter this relationship. Based on the results, sampling of a single egg in each clutch from any position in the laying sequence is sufficient for purposes of population risk assessment, but it is not recommended as a proxy for individual female exposure or as an estimate of average mercury level within the clutch. © 2015 SETAC.

The preference for high-fiber feed in laying hens divergently selected on feather pecking.

Science.gov (United States)

Kalmendal, R; Bessei, W

2012-08-01

Earlier studies in laying hens have demonstrated a negative correlation between feather pecking and the dietary fiber content of the feed. However, the factors underlying this relationship are not fully understood. In the present experiment, we hypothesized that birds prone to feather pecking would prefer a diet supplemented with dietary fiber. Thus, the aim was to investigate the voluntary consumption of a wheat-soy control diet (CON) and a diet supplemented with 8% spelt hulls (FIB) on the expense of wheat in 20 individually caged hens selected for high feather pecking (HFP) behavior and 20 individually caged hens selected for low feather pecking (LFP) behavior. The proportional intake of FIB was 0.39 and significantly different from 0.50 (Phens (0.36; Phens had inferior plumage condition (Pfeed intake (Phens plucked more feathers from a simple inanimate feather-pecking model, but the number of feathers being pulled out did not correlate with the proportional intake of FIB. It was concluded that the preference for feed supplemented with spelt hulls was different between hens displaying different feather-pecking behavior. The underlying reason for such a difference needs further investigation.

Low Temperature Mechanical Testing of Carbon-Fiber/Epoxy-Resin Composite Materials

Science.gov (United States)

Nettles, Alan T.; Biss, Emily J.

1996-01-01

The use of cryogenic fuels (liquid oxygen and liquid hydrogen) in current space transportation vehicles, in combination with the proposed use of composite materials in such applications, requires an understanding of how such materials behave at cryogenic temperatures. In this investigation, tensile intralaminar shear tests were performed at room, dry ice, and liquid nitrogen temperatures to evaluate the effect of temperature on the mechanical response of the IM7/8551-7 carbon-fiber/epoxy-resin system. Quasi-isotropic lay-ups were also tested to represent a more realistic lay-up. It was found that the matrix became both increasingly resistant to microcracking and stiffer with decreasing temperature. A marginal increase in matrix shear strength with decreasing temperature was also observed. Temperature did not appear to affect the integrity of the fiber-matrix bond.

Characteristics of continuous unidirectional kenaf fiber reinforced epoxy composites

International Nuclear Information System (INIS)

Mahjoub, Reza; Yatim, Jamaludin Mohamad; Mohd Sam, Abdul Rahman; Raftari, Mehdi

2014-01-01

Highlights: • To show the potential of continuous kenaf fiber to use in bio-composite. • To introduce new method of hand lay-up for fabricating bio-fiber composite. • To characterize the properties of kenaf fiber epoxy composite. • Morphology of the fracture area by using of SEM. • To use analytical method to predict the bio-composite properties. - Abstract: Kenaf fibers generally has some advantages such as eco-friendly, biodegradability, renewable nature and lighter than synthetic fibers. The aims of the study are to characterize and evaluate the physical and mechanical properties of continuous unidirectional kenaf fiber epoxy composites with various fiber volume fractions. The composites materials and sampling were prepared in the laboratory by using the hand lay-up method with a proper fabricating procedure and quality control. Samples were prepared based on ASTM: D3039-08 for tensile test and the scanning electron microscopy (SEM) was employed for microstructure analysis to observe the failure mechanisms in the fracture planes. A total of 40 samples were tested for the study. Results from the study showed that the rule of mixture (ROM) analytical model has a close agreement to predict the physical and tensile properties of unidirectional kenaf fiber reinforced epoxy composites. It was also observed that the tensile strength, tensile modulus, ultimate strain and Poisson’s ratio of 40% fiber volume content of unidirectional kenaf fiber epoxy composite were 164 MPa, 18150 MPa, 0.9% and 0.32, respectively. Due to the test results, increasing the fiber volume fraction in the composite caused the increment in the tensile modulus and reduction in the ultimate tensile strain of composite

Qualification of FFA treatment for the water-steam cycle as an innovative lay-up strategy for the long term outage of a CANDU-6 reactor

International Nuclear Information System (INIS)

Ramminger, Ute; Fandrich, Jörg; Sainz, Ricardo; Ovando, Luis; Herrera, Cecilia; Mendizabal, Maribel; Dumon, Adriana; Chocron, Mauricio

2014-01-01

The majority of worldwide operating Nuclear Power Plants is older than 25 years, which is accompanied with extended outage duration due to large refurbishment and upgrade programs, e.g. Steam Generator Replacement and other large component replacement. For these long term outages adequate and cost effective preservation methods are required. Normally during outages, systems and components are drained and opened to atmosphere whereas wet surfaces and moisture condensation can result in uniform corrosion of carbon steel and eventually other materials; superimposed localized corrosion is possible in presence of impurities. For those systems there are in general two different lay-up methods possible. Dry lay-up by removing all water and humidity from the components or wet lay-up with demineralized and oxygen free water and additional corrosion inhibitors. Disadvantages of these lay-up methods are: High man power and hardware efforts for performing dry lay-up. Usage of hazardous chemicals like Hydrazine. Insufficient results of both lay-up methods in case of switching between dry and wet lay-up. To improve the lay-up concept for long term outages, AREVA GmbH developed an innovative concept using FFA (Film-Forming Amines) for secondary side system lay-up. The entire water-steam cycle including the Steam Generators is treated in one step without any negative impact on the treated structural materials. This technology has been applied for the first time at NPP Embalse. Embalse Nuclear Power Station consists of a CANDU-6 reactor of 648 MWe electrical output. It is in commercial operation since 1984. The shutdown for refurbishment and preparation for the second cycle of operation that includes among other tasks the replacement of the existing steam generators and power uprating has been scheduled for 2014, which causes the necessity of a lay-up optimization in the plant. This paper deals in detail with the qualification process of the FFA treatment considering the specifics

Effect of different lay-ups on the microstructure, mechanical properties and neutron transmission of neutron shielding fibre metal laminates

International Nuclear Information System (INIS)

Fu, Xuelong; Tang, Xiaobin; Hu, Yubing; Li, Huaguan; Tao, Jie

2016-01-01

A novel neutron shielding fibre metal laminates (NSFMLs) with different lay-ups, composed of stacking layers of AA6061 plates, neutron shielding composite and carbon fibre reinforced polyimide (CFRP), were fabricated using hot molding process in atmospheric environments. The microstructure, mechanical properties and neutron transmission of the NSFMLs were evaluated, respectively. The results indicated that the NSFMLs possessed good mechanical properties owing to the good interfacial adhesion of the components. Tensile strength and elastic modulus of the NSFMLs increased with the numbers of lay-ups, while the elongation to fracture exhibited obvious declining tendency. Flexural strength and modulus of the NSFMLs were improved obviously with the increasing of stacking layers. Neutron transmission of the NSFMLs decreased obviously with increasing the number of lay-ups, owing to the increase of "1"0B areal density. Besides, the effect of carbon fibres on the neutron shielding performance of the NSFMLs was also taken into consideration. - Highlights: • A novel neutron shielding fibre metal laminates (NSFMLs) with different lay-ups was successfully fabricated using hot molding process. • Mechanical properties of the NSFMLs were performed in accordance with relative standards. • Neutron transmission of the NSFMLs was conducted according to the testing results. • The effect of carbon fibres on the neutron transmission of the NSFMLs was also investigated.

Effect of different lay-ups on the microstructure, mechanical properties and neutron transmission of neutron shielding fibre metal laminates

Energy Technology Data Exchange (ETDEWEB)

Fu, Xuelong [College of Material Science & Technology, Nanjing University of Aeronautics & Astronautics, Nanjing, 211100 (China); Department of Mechanical and Electronic Engineering, Jiangsu Polytechnic of Finance & Economics, Huai' an, 223003 (China); Tang, Xiaobin; Hu, Yubing; Li, Huaguan [College of Material Science & Technology, Nanjing University of Aeronautics & Astronautics, Nanjing, 211100 (China); Tao, Jie, E-mail: taojie@nuaa.edu.cn [College of Material Science & Technology, Nanjing University of Aeronautics & Astronautics, Nanjing, 211100 (China)

2016-07-15

A novel neutron shielding fibre metal laminates (NSFMLs) with different lay-ups, composed of stacking layers of AA6061 plates, neutron shielding composite and carbon fibre reinforced polyimide (CFRP), were fabricated using hot molding process in atmospheric environments. The microstructure, mechanical properties and neutron transmission of the NSFMLs were evaluated, respectively. The results indicated that the NSFMLs possessed good mechanical properties owing to the good interfacial adhesion of the components. Tensile strength and elastic modulus of the NSFMLs increased with the numbers of lay-ups, while the elongation to fracture exhibited obvious declining tendency. Flexural strength and modulus of the NSFMLs were improved obviously with the increasing of stacking layers. Neutron transmission of the NSFMLs decreased obviously with increasing the number of lay-ups, owing to the increase of {sup 10}B areal density. Besides, the effect of carbon fibres on the neutron shielding performance of the NSFMLs was also taken into consideration. - Highlights: • A novel neutron shielding fibre metal laminates (NSFMLs) with different lay-ups was successfully fabricated using hot molding process. • Mechanical properties of the NSFMLs were performed in accordance with relative standards. • Neutron transmission of the NSFMLs was conducted according to the testing results. • The effect of carbon fibres on the neutron transmission of the NSFMLs was also investigated.

Egg laying sequence influences egg mercury concentrations and egg size in three bird species: Implications for contaminant monitoring programs

Science.gov (United States)

Ackerman, Joshua T.; Eagles-Smith, Collin A.; Herzog, Mark P.; Yee, Julie L.; Hartman, C. Alex

2016-01-01

Bird eggs are commonly used in contaminant monitoring programs and toxicological risk assessments, but intra-clutch variation and sampling methodology could influence interpretability. We examined the influence of egg laying sequence on egg mercury concentrations and burdens in American avocets, black-necked stilts, and Forster's terns. The average decline in mercury concentrations between the first and last egg laid was 33% for stilts, 22% for terns, and 11% for avocets, and most of this decline occurred between the first and second eggs laid (24% for stilts, 18% for terns, and 9% for avocets). Trends in egg size with egg laying order were inconsistent among species and overall differences in egg volume, mass, length, and width were mercury concentrations generally declined by 16% between the first and second eggs laid. Despite the strong effect of egg laying sequence, most of the variance in egg mercury concentrations still occurred among clutches (75%-91%) rather than within clutches (9%-25%). Using simulations, we determined that to accurately estimate a population's mean egg mercury concentration using only a single random egg from a subset of nests, it would require sampling >60 nests to represent a large population (10% accuracy) or ≥14 nests to represent a small colony that contained <100 nests (20% accuracy).

Gossypium barbadense genome sequence provides insight into the evolution of extra-long staple fiber and specialized metabolites.

Science.gov (United States)

Liu, Xia; Zhao, Bo; Zheng, Hua-Jun; Hu, Yan; Lu, Gang; Yang, Chang-Qing; Chen, Jie-Dan; Chen, Jun-Jian; Chen, Dian-Yang; Zhang, Liang; Zhou, Yan; Wang, Ling-Jian; Guo, Wang-Zhen; Bai, Yu-Lin; Ruan, Ju-Xin; Shangguan, Xiao-Xia; Mao, Ying-Bo; Shan, Chun-Min; Jiang, Jian-Ping; Zhu, Yong-Qiang; Jin, Lei; Kang, Hui; Chen, Shu-Ting; He, Xu-Lin; Wang, Rui; Wang, Yue-Zhu; Chen, Jie; Wang, Li-Jun; Yu, Shu-Ting; Wang, Bi-Yun; Wei, Jia; Song, Si-Chao; Lu, Xin-Yan; Gao, Zheng-Chao; Gu, Wen-Yi; Deng, Xiao; Ma, Dan; Wang, Sen; Liang, Wen-Hua; Fang, Lei; Cai, Cai-Ping; Zhu, Xie-Fei; Zhou, Bao-Liang; Jeffrey Chen, Z; Xu, Shu-Hua; Zhang, Yu-Gao; Wang, Sheng-Yue; Zhang, Tian-Zhen; Zhao, Guo-Ping; Chen, Xiao-Ya

2015-09-30

Of the two cultivated species of allopolyploid cotton, Gossypium barbadense produces extra-long fibers for the production of superior textiles. We sequenced its genome (AD)2 and performed a comparative analysis. We identified three bursts of retrotransposons from 20 million years ago (Mya) and a genome-wide uneven pseudogenization peak at 11-20 Mya, which likely contributed to genomic divergences. Among the 2,483 genes preferentially expressed in fiber, a cell elongation regulator, PRE1, is strikingly At biased and fiber specific, echoing the A-genome origin of spinnable fiber. The expansion of the PRE members implies a genetic factor that underlies fiber elongation. Mature cotton fiber consists of nearly pure cellulose. G. barbadense and G. hirsutum contain 29 and 30 cellulose synthase (CesA) genes, respectively; whereas most of these genes (>25) are expressed in fiber, genes for secondary cell wall biosynthesis exhibited a delayed and higher degree of up-regulation in G. barbadense compared with G. hirsutum, conferring an extended elongation stage and highly active secondary wall deposition during extra-long fiber development. The rapid diversification of sesquiterpene synthase genes in the gossypol pathway exemplifies the chemical diversity of lineage-specific secondary metabolites. The G. barbadense genome advances our understanding of allopolyploidy, which will help improve cotton fiber quality.

Mechanical characterization of glass fiber (woven roving/chopped strand mat E-glass fiber) reinforced polyester composites

Science.gov (United States)

Bhaskar, V. Vijaya; Srinivas, Kolla

2017-07-01

Polymer reinforced composites have been replacing most of the engineering material and their applications become more and more day by day. Polymer composites have been analyzing from past thirty five years for their betterment for adapting more applications. This paper aims at the mechanical properties of polyester reinforced with glass fiber composites. The glass fiber is reinforced with polyester in two forms viz Woven Rovings (WRG) and Chopped Strand Mat (CSMG) E-glass fibers. The composites are fabricated by hand lay-up technique and the composites are cut as per ASTM Standard sizes for corresponding tests like flexural, compression and impact tests, so that flexural strength, compression strength, impact strength and inter laminar shear stress(ILSS) of polymer matrix composites are analyzed. From the tests and further calculations, the polyester composites reinforced with Chopped Strand Mat glass fiber have shown better performance against flexural load, compression load and impact load than that of Woven Roving glass fiber.

Effect of fiber angle orientation and stacking sequence on mixed mode fracture toughness of carbon fiber reinforced plastics: Numerical and experimental investigations

International Nuclear Information System (INIS)

Naghipour, P.; Bartsch, M.; Chernova, L.; Hausmann, J.; Voggenreiter, H.

2010-01-01

This paper focuses on the effect of fiber orientation and stacking sequence on the progressive mixed mode delamination failure in composite laminates using fracture experiments and finite element (FE) simulations. Every laminate is modelled numerically combining damageable layers with defined fiber orientations and cohesive zone interface elements, subjected to mixed mode bending. The numerical simulations are then calibrated and validated through experiments, conducted following standardized mixed mode delamination tests. The numerical model is able to successfully capture the experimentally observed effects of fiber angle orientations and variable stacking sequences on the global load-displacement response and mixed mode inter-laminar fracture toughness of the various laminates. For better understanding of the failure mechanism, fracture surfaces of laminates with different stacking sequences are also studied using scanning electron microscopy (SEM).

Isolation and characterization of gene sequences expressed in cotton fiber

Directory of Open Access Journals (Sweden)

Taciana de Carvalho Coutinho

2016-06-01

Full Text Available ABSTRACT Cotton fiber are tubular cells which develop from the differentiation of ovule epidermis. In addition to being one of the most important natural fiber of the textile group, cotton fiber afford an excellent experimental system for studying the cell wall. The aim of this work was to isolate and characterise the genes expressed in cotton fiber (Gossypium hirsutum L. to be used in future work in cotton breeding. Fiber of the cotton cultivar CNPA ITA 90 II were used to extract RNA for the subsequent generation of a cDNA library. Seventeen sequences were obtained, of which 14 were already described in the NCBI database (National Centre for Biotechnology Information, such as those encoding the lipid transfer proteins (LTPs and arabinogalactans (AGP. However, other cDNAs such as the B05 clone, which displays homology with the glycosyltransferases, have still not been described for this crop. Nevertheless, results showed that several clones obtained in this study are associated with cell wall proteins, wall-modifying enzymes and lipid transfer proteins directly involved in fiber development.

Egg-laying sequence influences egg mercury concentrations and egg size in three bird species: Implications for contaminant monitoring programs.

Science.gov (United States)

Ackerman, Joshua T; Eagles-Smith, Collin A; Herzog, Mark P; Yee, Julie L; Hartman, C Alex

2016-06-01

Bird eggs are commonly used in contaminant monitoring programs and toxicological risk assessments, but intraclutch variation and sampling methodology could influence interpretability. The authors examined the influence of egg-laying sequence on egg mercury concentrations and burdens in American avocets, black-necked stilts, and Forster's terns. The average decline in mercury concentrations between the first and last eggs laid was 33% for stilts, 22% for terns, and 11% for avocets, and most of this decline occurred between the first and second eggs laid (24% for stilts, 18% for terns, and 9% for avocets). Trends in egg size with egg-laying order were inconsistent among species, and overall differences in egg volume, mass, length, and width were eggs laid. Despite the strong effect of egg-laying sequence, most of the variance in egg mercury concentrations still occurred among clutches (75-91%) rather than within clutches (9%-25%). Using simulations, the authors determined that accurate estimation of a population's mean egg mercury concentration using only a single random egg from a subset of nests would require sampling >60 nests to represent a large population (10% accuracy) or ≥14 nests to represent a small colony that contained <100 nests (20% accuracy). Environ Toxicol Chem 2016;35:1458-1469. Published 2015 Wiley Periodicals Inc. on behalf of SETAC. This article is a US Government work and, as such, is in the public domain in the United States of America. Published 2015 Wiley Periodicals Inc. on behalf of SETAC. This article is a US Government work and, as such, is in the public domain in the United States of America.

Bearing Stress at Failure of Double-Lap Hybrid Joints in Woven Fabric Kenaf Fiber Composite Plates under Quasi-static Loading

Directory of Open Access Journals (Sweden)

Lee Sim Yee

2017-01-01

Full Text Available The present paper is focused on the bearing stress at failure of double-lap woven fabric kenaf fiber reinforced polymer (KFRP hybrid bonded-bolted joints in experimental frameworks. The effects of different normalized plate width (plate width/hole diameter, W/d, lay-up types and bolt loads were incorporated in current study as specified in testing series. Generally, hybrid joint coupons separated within adhesive layer prior to net-tension failure or bearing/net-tension failure. The bearing stress at failure increased as W/d ratio increment, critical W/d is given as four and three in clamped and finger tight condition respectively. Lay-up types present insignificant effect to bearing stress at failure due to low volume fiber fraction in kenaf fiber composites. Combination of thicker and clamped conditions plate demonstrated greater bearing stress than equivalent finger-tight (FT conditions due to higher load transferred from friction, as expected.

Optimization of wall thickness and lay-up for the shell-like composite structure loaded by non-uniform pressure field

Science.gov (United States)

Shevtsov, S.; Zhilyaev, I.; Oganesyan, P.; Axenov, V.

2017-01-01

The glass/carbon fiber composites are widely used in the design of various aircraft and rotorcraft components such as fairings and cowlings, which have predominantly a shell-like geometry and are made of quasi-isotropic laminates. The main requirements to such the composite parts are the specified mechanical stiffness to withstand the non-uniform air pressure at the different flight conditions and reduce a level of noise caused by the airflow-induced vibrations at the constrained weight of the part. The main objective of present study is the optimization of wall thickness and lay-up of composite shell-like cowling. The present approach assumes conversion of the CAD model of the cowling surface to finite element (FE) representation, then its wind tunnel testing simulation at the different orientation of airflow to find the most stressed mode of flight. Numerical solutions of the Reynolds averaged Navier-Stokes (RANS) equations supplemented by k-w turbulence model provide the spatial distributions of air pressure applied to the shell surface. At the formulation of optimization problem the global strain energy calculated within the optimized shell was assumed as the objective. A wall thickness of the shell had to change over its surface to minimize the objective at the constrained weight. We used a parameterization of the problem that assumes an initiation of auxiliary sphere with varied radius and coordinates of the center, which were the design variables. Curve that formed by the intersection of the shell with sphere defined boundary of area, which should be reinforced by local thickening the shell wall. To eliminate a local stress concentration this increment was defined as the smooth function defined on the shell surface. As a result of structural optimization we obtained the thickness of shell's wall distribution, which then was used to design the draping and lay-up of composite prepreg layers. The global strain energy in the optimized cowling was reduced in2

Lay-Offs in The Name of Love

DEFF Research Database (Denmark)

Åkerstrøm Andersen, Niels

2015-01-01

A number of articles have shown that the relationship between organisation and employee has become an intimate relationship. This is indeed the case in Denmark. This article shows how the problem of lay-off is discursively rearticulated in the context of passion as a problem of intimate breaks. Lay......-off becomes a tricky problem of breaking up in a loving way. This article is a semantic analysis of the lay-off semantics in Denmark after the financial crisis, comparing lay-off semantics with the semantics of divorces. Handbooks on lay-offs use divorce metaphors, and particular strategies for divorces can...... be found in advisory tools on the termination of employees. Lay-offs are split in two: a formal lay-off and an intimate break. This creates a number of interesting discursive paradoxes for both managers and employees....

Mechanical Characterization of Cotton Fiber/Polyester Composite Material

Directory of Open Access Journals (Sweden)

Altaf Hussain Rajper

2014-04-01

Full Text Available Development of composite from natural fiber for lower structural application is growing for long-term sustainable perspective. Cotton fiber composite material has the added advantages of high specific strength, corrosion resistance, low cost and low weight compared to glass fiber on the expense of internal components of IC engines. The primary aim of the research study is to examine the effect of the cotton fiber on mechanical properties of lower structural applications when added with the polyester resin. In this paper composite material sample has been prepared by hand Lay-Up process. A mould is locally developed in the laboratory for test sample preparation. Initially samples of polyester resin with appropriate ratio of the hardener were developed and tested. At the second stage yarns of cotton fiber were mixed with the polyester resin and sample specimens were developed and tested. Relative effect of the cotton as reinforcing agent was examined and observed that developed composite specimen possess significant improvement in mechanical properties such as tensile strength was improved as 19.78 % and modulus of elasticity was increased up to 24.81%. Through this research it was also observed that developed composite material was of ductile nature and its density decreases up to 2.6%. Results from this study were compared with relevant available advanced composite materials and found improved mechanical properties of developed composite material

Gene Expression Profiling in the Pituitary Gland of Laying Period and Ceased Period Huoyan Geese

Directory of Open Access Journals (Sweden)

Xinhong Luan

2013-07-01

Full Text Available Huoyan goose is a Chinese local breed famous for its higher laying performance, but the problems of variety degeneration have emerged recently, especially a decrease in the number of eggs laid. In order to better understand the molecular mechanism that underlies egg laying in Huoyan geese, gene profiles in the pituitary gland of Huoyan geese taken during the laying period and ceased period were investigated using the suppression subtractive hybridization (SSH method. Total RNA was extracted from pituitary glands of ceased period and laying period geese. The cDNA in the pituitary glands of ceased geese was subtracted from the cDNA in the pituitary glands of laying geese (forward subtraction; the reverse subtraction was also performed. After sequencing and annotation, a total of 30 and 24 up and down-regulated genes were obtained from the forward and reverse SSH libraries, respectively. These genes mostly related to biosynthetic process, cellular nitrogen compound metabolic process, transport, cell differentiation, cellular protein modification process, signal transduction, small molecule metabolic process. Furthermore, eleven genes were selected for further analyses by quantitative real-time PCR (qRT-PCR. The qRT-PCR results for the most part were consistent with the SSH results. Among these genes, Synaptotagmin-1 (SYT1 and Stathmin-2 (STMN2 were substantially over-expressed in laying period compared to ceased period. These results could serve as an important reference for elucidating the molecular mechanism of higher laying performance in Huoyan geese.

Investigations on Thermal Conductivities of Jute and Banana Fiber Reinforced Epoxy Composites

Science.gov (United States)

Pujari, Satish; Ramakrishna, Avasarala; Balaram Padal, Korabu Tulasi

2017-04-01

The Jute and Banana fibers are used as reinforcement in epoxy resin matrix for making partially green biodegradable material composite via hand lay-up technique. The thermal conductivity of the jute fiber epoxy composites and banana fiber epoxy composites at different volume fraction of the fiber is determined experimentally by using guarded heat flow meter method. The experimental results had shown that thermal conductivity of the composites decrease with an increase in the fiber content. Experimental results are compared with theoretical models (Series model, Hashin model and Maxwell model) to describe the variation of the thermal conductivity versus the volume fraction of the fiber. Good agreement between theoretical and experimental results is observed. Thermal conductivity of Banana fiber composite is less when compared to that of Jute composite which indicates banana is a good insulator and also the developed composites can be used as insulating materials in building, automotive industry and in steam pipes to save energy by reducing rate of heat transfer.

Evaluating the mechanical properties of E-Glass fiber/carbon fiber reinforced interpenetrating polymer networks

Directory of Open Access Journals (Sweden)

G. Suresh

2015-02-01

Full Text Available A series of vinyl ester and polyurethane interpenetrating polymer networks were prepared by changing the component ratios of VER (Vinyl ester and PU (Polyurethane and the polymerization process was confirmed with Fourier Transform infrared spectroscopy. IPN (Inter Penetrating Polymer Network - VER/PU reinforced Glass and carbon fiber composite laminates were made using the Hand lay up technique. The Mechanical properties of the E-glass and carbon fiber specimens were compared from tests including Tensile, Compressive, Flexural, ILSS (Inter Laminar Shear Strength, Impact & Head Deflection Test (HDT. The IPN Reinforced Carbon fiber specimen showed better results in all the tests than E-Glass fibre reinforced IPN laminate with same thickness of the specimen, according to ASTM standards. It was found that the combination of 60%VER and 40%PU IPN exhibits better impact strength and maximum elongation at break, but at the slight expense of mechanical properties such as tensile, compressive, flexural, ILSS properties. The morphology of the unreinforced and reinforced composites was analyzed with help of scanning electron microscopy.

Concrete laying laboratory

International Nuclear Information System (INIS)

Bastlova, K.

1986-01-01

The task of the concrete laying laboratory established within a special department for quality control and assurance at the Dukovany nuclear power plant, is to check the composition of concrete mixes produced by the central concrete production plant on the site, and the shipment, laying and processing of concrete. The composition is given of special barite and serpentinite concretes designed for biological shields. The system of checks and of filing the results is briefly described. Esperience is summed up from the operation of the concrete laying laboratory, and conclusions are formulated which should be observed on similar large construction sites. They include the precise definition of the designer's requirements for the quality of concrete, the surface finish of concrete surfaces, the method of concreting specific structures around bushings, increased density reinforcements and various technological elements, and requirements for shipment to poorly accessible or remote places. As for the equipment of the laboratory, it should be completed with an instrument for the analysis of fresh concrete mixes, a large capacity drying kiln, etc. (Z.M.)

Hybrid Effect Evaluation of Steel Fiber and Carbon Fiber on the Performance of the Fiber Reinforced Concrete.

Science.gov (United States)

Song, Weimin; Yin, Jian

2016-08-18

Fiber reinforcement is an important method to enhance the performance of concrete. In this study, the compressive test and impact test were conducted, and then the hybrid effect between steel fiber (SF) and carbon fiber (CF) was evaluated by employing the hybrid effect index. Compressive toughness and impact toughness of steel fiber reinforced concrete (SFRC), carbon fiber reinforced concrete (CFRC) and hybrid fiber reinforced concrete (HFRC) were explored at steel fiber volume fraction 0.5%, 1%, 1.5% and carbon fiber 0.1%, 0.2%, 0.3%. Results showed that the addition of steel fiber and carbon fiber can increase the compressive strength. SF, CF and the hybridization between them could increase the compressive toughness significantly. The impact test results showed that as the volume of fiber increased, the impact number of the first visible crack and the ultimate failure also increased. The improvement of toughness mainly lay in improving the crack resistance after the first crack. Based on the test results, the positive hybrid effect of steel fiber and carbon fiber existed in hybrid fiber reinforced concrete. The relationship between the compressive toughness and impact toughness was also explored.

Fiber up-tapering and down-tapering for low-loss coupling between anti-resonant hollow-core fiber and solid-core fiber

Science.gov (United States)

Zhang, Naiqian; Wang, Zefeng; Xi, Xiaoming

2017-10-01

In this paper, we demonstrate a novel method for the low-loss coupling between solid-core multi-mode fibers (MMFs) and anti-resonant hollow-core fibers (AR-HCFs). The core/cladding diameter of the MMF is 50/125μm and the mode field diameter of the AR-HCFs are 33.3μm and 71.2μm of the ice-cream type AR-HCFs and the non-node type ARHCFs, respectively. In order to match the mode field diameters of these two specific AR-HCFs, the mode field diameter of the MMFs is increased or decreased by up-tapering or down-tapering the MMFs. Then, according to the principle of coupled fiber mode matching, the optimal diameter of tapered fiber for low-loss coupling is calculated. Based on beam propagation method, the calculated coupling losses without tapering process are 0.31dB and 0.89dB, respectively for a MMF-HCF-MMF structure of the ice-cream type AR-HCFs and the non-node type AR-HCFs. These values can be reduced to 0.096dB and 0.047dB when the outer diameters of the MMF are down-tapered to 116μm and up-tapered to 269μm, respectively. What's more, these results can also be verified by existing experiments.

Analyzing the effect of carbon fiber reinforced polymer on the crashworthiness of aluminum square hollow beam for crash box application

Science.gov (United States)

Raman, R.; Jayanth, K.; Sarkar, I.; Ravi, K.

2017-11-01

Crashworthiness of a material is a measure of its ability to absorb energy during a crash. A well-designed crash box is instrumental in protecting the costly vehicle components. A square, hollow, hybrid beam of aluminum/CFRP was subjected to dynamic axial load to analyze the effect of five different lay-up sequences on its crashworthiness. The beam was placed between two plates. Boundary conditions were imposed on them to simulate a frontal body crash test model. Modeling and dynamic analysis of composite structures was done on ABAQUS. Different orientation of carbon fibers varies the crashworthiness of the hybrid beam. Addition of CFRP layer showed clear improvement in specific energy absorption and crush force efficiency compared to pure aluminum beam. Two layers of CFRP oriented at 90° on Aluminum showed 52% increase in CFE.

Effect of natural fibers and bio-resins on mechanical properties in hybrid and non-hybrid composites

Science.gov (United States)

Fragassa, Cristiano

2016-05-01

The aim of the present experimental investigation was to perform a comparative analysis concerning the influence on mechanical properties of natural fibers and/or bio-resins in reinforced thermoset composites. Flax and basalt fibers were selected as natural reinforcements, as single constituents or in hybrid combination. Glass synthetic fibers were used for comparison. Eco-friendly matrixes, both epoxy or vinylester, were considered and compared with composites based on traditional resins. Samples were fabricated by hand lay-up and resin infusion techniques. Cures were accelerated and controlled by applying heat and pressure in autoclave. Tensile, flexural and impact tests were carried out according to ASTM standards.

The effect of fiber treatment on abrasive wear properties of palm fiber reinforced epoxy composite

Science.gov (United States)

Razak, Muhammad Firdaus Abdul; Bakar, Mimi Azlina Abu; Kasolang, Salmiah; Ahmad, Mohamad Ali

2017-12-01

Oil palm industries generate at least 30 million tons of lignocellulosic biomass annually in the form of oil palm trunks (OPT), empty fruit bunches (EFB), oil palm fronds (OPF) and palm pressed fibres (PPF). The palm fiber is one of the natural fibers used as reinforcement in composite materials in order to decrease environmental issues and promotes utilization of renewable resources. This paper presents a study on the effect of alkaline treatment on wear properties of palm fiber reinforced epoxy resin composite. Abrasive wear testing was deployed to investigate the wear profile of the composite surfaces. Testing was carried out which focused on the effect of alkaline treatment to the palm fiber under different amounts of fiber loading i.e. 1 wt%, 3 wt%, 5 wt% and 7 wt%. The palm fibers were soaked into 6 % of alkaline solution or natrium hydroxide (NaOH) for 12 hours. The fiber was treated in order to remove amorphous materials such as hemicelluloses, lignins and pectins of the fiber. The wear test samples were fabricated using hand lay-up technique and cured at room temperature for 24 hours. Surface roughness of the composite material was also measured using the surface measuring instrument. Dry sliding wear test was performed at room temperature at a constant velocity of 1.4 m/s with a constant load of 10 N by using the Abrasion Test Machine. Result shows that 5 wt% and 7 wt% treated palm fiber loadings have better specific wear rate compared to lower fiber loadings. The finding of this study contributes towards material development and utilization in promoting `waste into wealth' which is in line with national aspiration.

Shrimp cephalothorax meal in laying hen diets

International Nuclear Information System (INIS)

Salas-Duran, Catalina; Chacon-Villalobos, Alejandro; Zamora-Sanchez, Laura

2015-01-01

The effect of shrimp meal (SM) was measure in commercial laying hen diets. Pleuroncodes planipes was used in Costa Rica, from April to September 2013, to obtain a meal (SM) with a yield of 15%, particle size of 256 μg and negative for Salmonella sp. Proximate analysis was performed to the SM: crude protein (40,67%), ether extract (11,05%), crude fiber (7,12%), ash (27,48%), calcium (9,03%), phosphorus (2,66%), amino acid profile, pepsin digestibility (84%) and acidity (8,34). Subsequently, a trial was performed with 140 40-week-old Hy-Line Brown laying hens, fed with four different diets containing increasing levels of inclusion of SM (0%, 5%, 10%, and 15%) during four weeks; and formulated according to the ideal protein and digestible amino acids concepts; being isocaloric and isoproteic. The variables experimentally evaluated were: production percentage, feed intake, body weight, mortality, egg weight and feed conversion ratio. Only egg weight changed significantly between treatments in the third week (p [es

Evaluations of fiber optic sensors for interior applications

Energy Technology Data Exchange (ETDEWEB)

Sandoval, M.W.; Malone, T.P.

1996-02-01

This report addresses the testing and evaluation of commercial fiber optic intrusion detection systems in interior applications. The applications include laying optical fiber cable above suspended ceilings to detect removal of ceiling tiles, embedding optical fibers inside a tamper or item monitoring blanket that could be placed over an asset, and installing optical fibers on a door to detect movement or penetration. Detection capability of the fiber optic sensors as well as nuisance and false alarm information were focused on during the evaluation. Fiber optic sensor processing, system components, and system setup are described.

Starting-up sequence of the AWEC-60 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la.

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions. This report shows the graphic information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m. diameter and 1200 kW of rated power, recorded in April 1991 and cut-out wind speed. (author)

Natural Fiber Reinforced Composites: A Review on Potential for Corrugated Core of Sandwich Structures

Directory of Open Access Journals (Sweden)

Jusoh A.F.

2016-01-01

Full Text Available Natural fibers, characterized by sustainability, have gained a considerable attention in recent years, due to their advantages of environmental acceptability and commercial viability. In this paper, the characterization of natural fibers including the mechanical properties and alkalization of fibers is presented. Most recent study had gone through the mercerization process to improve the toughness of natural fibers; which is a well-known hydrophilic material. Traditional reinforcement method was commonly used to fabricate a natural fiber composite such as hand lay-up and mold press due to its convenience in terms of time and cost. Also, different kind of matrix material used in different kind of natural fibers gave high impact on the tensile and flexural test result. By selecting appropriate chemical treatment, matrix material and fabrication method, the tensile and flexural test gives different results and findings. As most researchers tend to use metals to create corrugated cores for sandwich structure, it is possible to develop this structure using natural fibers such as kenaf, wood dust, and other natural fibers.

NicoLase-An open-source diode laser combiner, fiber launch, and sequencing controller for fluorescence microscopy.

Directory of Open Access Journals (Sweden)

Philip R Nicovich

Full Text Available Modern fluorescence microscopy requires software-controlled illumination sources with high power across a wide range of wavelengths. Diode lasers meet the power requirements and combining multiple units into a single fiber launch expands their capability across the required spectral range. We present the NicoLase, an open-source diode laser combiner, fiber launch, and software sequence controller for fluorescence microscopy and super-resolution microscopy applications. Two configurations are described, giving four or six output wavelengths and one or two single-mode fiber outputs, with all CAD files, machinist drawings, and controller source code openly available.

Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with SiliconCarbide Powder And with Chopped Glass Fiber

Directory of Open Access Journals (Sweden)

Bushra Hosnie Musa

2018-02-01

Full Text Available The work studied the effectoffine silicon carbide (SiC powder with (0,3,5,7wt % on the thermal conductivity and mechanical properties of unsaturated polyester composite in the presence of a fixed amount of chopped glass fiber. The hand lay-up technique was employed to preparethe required samples. Results showed that tensile, impact strength and thermal conductivity increased with increasing the weight fraction of reinforced materials.

Amyloid fibril formation from sequences of a natural beta-structured fibrous protein, the adenovirus fiber.

Science.gov (United States)

Papanikolopoulou, Katerina; Schoehn, Guy; Forge, Vincent; Forsyth, V Trevor; Riekel, Christian; Hernandez, Jean-François; Ruigrok, Rob W H; Mitraki, Anna

2005-01-28

Amyloid fibrils are fibrous beta-structures that derive from abnormal folding and assembly of peptides and proteins. Despite a wealth of structural studies on amyloids, the nature of the amyloid structure remains elusive; possible connections to natural, beta-structured fibrous motifs have been suggested. In this work we focus on understanding amyloid structure and formation from sequences of a natural, beta-structured fibrous protein. We show that short peptides (25 to 6 amino acids) corresponding to repetitive sequences from the adenovirus fiber shaft have an intrinsic capacity to form amyloid fibrils as judged by electron microscopy, Congo Red binding, infrared spectroscopy, and x-ray fiber diffraction. In the presence of the globular C-terminal domain of the protein that acts as a trimerization motif, the shaft sequences adopt a triple-stranded, beta-fibrous motif. We discuss the possible structure and arrangement of these sequences within the amyloid fibril, as compared with the one adopted within the native structure. A 6-amino acid peptide, corresponding to the last beta-strand of the shaft, was found to be sufficient to form amyloid fibrils. Structural analysis of these amyloid fibrils suggests that perpendicular stacking of beta-strand repeat units is an underlying common feature of amyloid formation.

Mechanical Property Evaluation of Palm/Glass Sandwiched Fiber Reinforced Polymer Composite in Comparison with few natural composites

Science.gov (United States)

Raja Dhas, J. Edwin; Pradeep, P.

2017-10-01

Natural fibers available plenty can be used as reinforcements in development of eco friendly polymer composites. The less utilized palm leaf stalk fibers sandwiched with artificial glass fibers was researched in this work to have a better reinforcement in preparing a green composite. The commercially available polyester resin blend with coconut shell filler in nano form was used as matrix to sandwich these composites. Naturally available Fibers of palm leaf stalk, coconut leaf stalk, raffia and oil palm were extracted and treated with potassium permanganate solution which enhances the properties. For experimentation four different plates were fabricated using these fibers adopting hand lay-up method. These sandwiched composite plates are further machined to obtain ASTM standards Specimens which are mechanically tested as per standards. Experimental results reveal that the alkali treated palm leaf stalk fiber based polymer composite shows appreciable results than the others. Hence the developed composite can be recommended for fabrication of automobile parts.

Characterization of the Kenaf (Hibiscus cannabinus) Global Transcriptome Using Illumina Paired-End Sequencing and Development of EST-SSR Markers

Science.gov (United States)

Li, Hui; Li, Defang; Chen, Anguo; Tang, Huijuan; Li, Jianjun; Huang, Siqi

2016-01-01

Kenaf (Hibiscus cannabinus L.) is an economically important natural fiber crop grown worldwide. However, only 20 expressed tag sequences (ESTs) for kenaf are available in public databases. The aim of this study was to develop large-scale simple sequence repeat (SSR) markers to lay a solid foundation for the construction of genetic linkage maps and marker-assisted breeding in kenaf. We used Illumina paired-end sequencing technology to generate new EST-simple sequences and MISA software to mine SSR markers. We identified 71,318 unigenes with an average length of 1143 nt and annotated these unigenes using four different protein databases. Overall, 9324 complementary pairs were designated as EST-SSR markers, and their quality was validated using 100 randomly selected SSR markers. In total, 72 primer pairs reproducibly amplified target amplicons, and 61 of these primer pairs detected significant polymorphism among 28 kenaf accessions. Thus, in this study, we have developed large-scale SSR markers for kenaf, and this new resource will facilitate construction of genetic linkage maps, investigation of fiber growth and development in kenaf, and also be of value to novel gene discovery and functional genomic studies. PMID:26960153

Characterization of the Kenaf (Hibiscus cannabinus) Global Transcriptome Using Illumina Paired-End Sequencing and Development of EST-SSR Markers.

Science.gov (United States)

Li, Hui; Li, Defang; Chen, Anguo; Tang, Huijuan; Li, Jianjun; Huang, Siqi

2016-01-01

Kenaf (Hibiscus cannabinus L.) is an economically important natural fiber crop grown worldwide. However, only 20 expressed tag sequences (ESTs) for kenaf are available in public databases. The aim of this study was to develop large-scale simple sequence repeat (SSR) markers to lay a solid foundation for the construction of genetic linkage maps and marker-assisted breeding in kenaf. We used Illumina paired-end sequencing technology to generate new EST-simple sequences and MISA software to mine SSR markers. We identified 71,318 unigenes with an average length of 1143 nt and annotated these unigenes using four different protein databases. Overall, 9324 complementary pairs were designated as EST-SSR markers, and their quality was validated using 100 randomly selected SSR markers. In total, 72 primer pairs reproducibly amplified target amplicons, and 61 of these primer pairs detected significant polymorphism among 28 kenaf accessions. Thus, in this study, we have developed large-scale SSR markers for kenaf, and this new resource will facilitate construction of genetic linkage maps, investigation of fiber growth and development in kenaf, and also be of value to novel gene discovery and functional genomic studies.

Starting-up sequence of the AWEC-6 0 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions This report shows the graphic Information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m diameter and 1200 kW of rated power, recorded in April 1991 and covering all the operation range between cut-in and cut-out wind speed. (Author) 2 refs

Digestibility and physico-chemical characteristics of acid silage meal made of pirarucu waste in diets for commercial laying hens

Directory of Open Access Journals (Sweden)

Oscarina de Souza Batalha

2017-07-01

Full Text Available The objective of this study was to evaluate the effects of acid silage meal made of pirarucu waste in diets for commercial laying hens on apparent digestibility and energy metabolism. Seventy-two Hisex White hens with 71 weeks of age were assigned to a completely randomized with two treatments (control diet and diet with 3% pirarucu waste acid silage with six replicates of six birds each. The ensiled biomass was light brown in color, showing acidified aroma; creamy consistency; 4.38±0.11 pH; 84.16% dry matter; 40.06% crude protein; 26.82% ether extract; 9.31% mineral matter, 65.16 g kg-1 calcium and 22.90 g kg-1 phosphorus. Differences (p > 0.05 were detected in digestibility of crude protein, non-fiber carbohydrates (soluble carbohydrates, etherextract, mineral matter, metabolizable energy and metabolizable energy coefficient. Our results indicate that the acid silage mealmade of pirarucu waste can be included up to 3% in diets for laying hens, showing satisfactory nutrient digestibility and potential to be used as an energy source.

AE analysis of delamination crack propagation in carbon fiber-reinforced polymer materials

Energy Technology Data Exchange (ETDEWEB)

Yoon, Sang Jae; Arakawa, Kazuo [Kyushu University, kasuga (Japan); Chen, Dingding [National University of Defense Technology, Changsha (China); Han, Seung Wook; Choi, Nak Sam [Hanyang University, Seoul (Korea, Republic of)

2015-01-15

Delamination fracture behavior was investigated using acoustic emission (AE) analysis on carbon fiber-reinforced polymer (CFRP) samples manufactured using vacuum-assisted resin transfer molding (VARTM). CFRP plate was fabricated using unidirectional carbon fiber fabric with a lay-up of six plies [+30/-30]6 , and a Teflon film was inserted as a starter crack. Test pieces were sectioned from the inlet and vent of the mold, and packed between two rectangular epoxy plates to load using a universal testing machine. The AE signals were monitored during tensile loading using two sensors. The average tensile load of the inlet specimens was slightly larger than that of the vent specimens; however, the data exhibited significant scattering due to non-uniform resin distribution, and there was no statistically significant different between the strength of the samples sectioned from the inlet or outlet of the mold. Each of the specimens exhibited similar AE characteristics, regardless of whether they were from the inlet or vent of the mold. Four kinds of damage mechanism were observed: micro-cracking, fiber-resin matrix debonding, fiber pull-out, and fiber failure; and three stages of the crack propagation process were identified.

Effect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite

Directory of Open Access Journals (Sweden)

Ching Kuan Yong

2015-03-01

Full Text Available The increase of environmental awareness has led to interest in the use of materials with eco-friendly attributes. In this study, a sandwich composite was developed from polyester and kenaf fiber with various orientation arrangements. Polyester/kenaf sandwich composite was fabricated through the combination of a hand lay-up process and cold compression. The tensile, flexural, and Izod impact tests of the sandwich composites were evaluated by using a universal tensile tester and an impact tester. The thermal stability of polyester/kenaf sandwich composite and plywood were investigated by using a thermogravimetric analyser. Results showed that the polyester/kenaf sandwich composite with kenaf fiber in anisotropy orientation achieved the highest mechanical properties. The kenaf fiber in anisotropic orientation could absorb the impact energy and allow the sandwich composite to withstand greater impact forces compared to composite with fiber in perpendicular or isotropic orientations. The polyester/kenaf sandwich composite also showed higher thermal stability compared to a conventional plywood sheet. Thus, the fabrication of polyester/kenaf sandwich composite with kenaf fiber in an anisotropic orientation design has great potential to replace plywood sheets for beam construction applications.

A comparison of tensile properties of polyester composites reinforced with pineapple leaf fiber and pineapple peduncle fiber

Science.gov (United States)

Juraidi, J. M.; Shuhairul, N.; Syed Azuan, S. A.; Intan Saffinaz Anuar, Noor

2013-12-01

Pineapple fiber which is rich in cellulose, relatively inexpensive, and abundantly available has the potential for polymer reinforcement. This research presents a study of the tensile properties of pineapple leaf fiber and pineapple peduncle fiber reinforced polyester composites. Composites were fabricated using leaf fiber and peduncle fiber with varying fiber length and fiber loading. Both fibers were mixed with polyester composites the various fiber volume fractions of 4, 8 and 12% and with three different fiber lengths of 10, 20 and 30 mm. The composites panels were fabricated using hand lay-out technique. The tensile test was carried out in accordance to ASTM D638. The result showed that pineapple peduncle fiber with 4% fiber volume fraction and fiber length of 30 mm give highest tensile properties. From the overall results, pineapple peduncle fiber shown the higher tensile properties compared to pineapple leaf fiber. It is found that by increasing the fiber volume fraction the tensile properties has significantly decreased but by increasing the fiber length, the tensile properties will be increased proportionally. Minitab software is used to perform the two-way ANOVA analysis to measure the significant. From the analysis done, there is a significant effect of fiber volume fraction and fiber length on the tensile properties.

Maternal effects mediated by egg quality in the Yellow-legged Gull Larus michahellis in relation to laying order and embryo sex

Directory of Open Access Journals (Sweden)

Caprioli Manuela

2011-10-01

Full Text Available Abstract Background Maternal effects mediated by egg size and quality may profoundly affect offspring development and performance, and mothers may adjust egg traits according to environmental or social influences. In avian species, context-dependency of maternal effects may result in variation in egg composition, as well as in differential patterns of covariation among selected egg components, according to, for example, position in the laying sequence or offspring sex. We investigated variation in major classes of egg yolk components (carotenoids, vitamins and steroid hormones in relation to egg size, position in the laying sequence and embryo sex in clutches of the Yellow-legged Gull (Larus michahellis. We also investigated their covariation, to highlight mutual adjustments, maternal constraints or trade-offs in egg allocation. Results Laying sequence-specific patterns of allocation emerged: concentration of carotenoids and vitamin E decreased, while concentrations of androgens increased. Vitamin A, estradiol and corticosterone did not show any change. There was no evidence of sex-specific allocation or covariation of yolk components. Concentrations of carotenoids and vitamins were positively correlated. Egg mass decreased along the laying sequence, and this decrease was negatively correlated with the mean concentrations of carotenoids in clutches, suggesting that nutritionally constrained females lay low quality clutches in terms of carotenoid content. Finally, clutches with smaller decline in antioxidants between first- and last-laid eggs had a larger increase in yolk corticosterone, suggesting that a smaller antioxidant depletion along the laying sequence may entail a cost for laying females in terms of increased stress levels. Conclusions Since some of the analyzed yolk components (e.g. testosterone and lutein are known to exert sex-specific phenotypic effects on the progeny in this species, the lack of sex-specific egg allocation by

Fabrication of Polyimide-Matrix/Carbon and Boron-Fiber Tape

Science.gov (United States)

Belvin, Harry L.; Cano, Roberto J.; Treasure, Monte; Shahood, Thomas W.

2007-01-01

The term HYCARB denotes a hybrid composite of polyimide matrices reinforced with carbon and boron fibers. HYCARB and an improved process for fabricating dry HYCARB tapes have been invented in a continuing effort to develop lightweight, strong composite materials for aerospace vehicles. Like other composite tapes in this line of development, HYCARB tapes are intended to be used to build up laminated structures having possibly complex shapes by means of automated tow placement (ATP) - a process in which a computer-controlled multiaxis machine lays down prepreg tape or tows. The special significance of the present process for making dry HYCARB for ATP is that it contributes to the reduction of the overall cost of manufacturing boron-reinforced composite-material structures while making it possible to realize increased compression strengths. The present process for making HYCARB tapes incorporates a "wet to dry" process developed previously at Langley Research Center. In the "wet to dry" process, a flattened bundle of carbon fiber tows, pulled along a continuous production line between pairs of rollers, is impregnated with a solution of a poly(amide acid) in N-methyl-2-pyrrolidinone (NMP), then most of the NMP is removed by evaporation in hot air. In the present case, the polyamide acid is, more specifically, that of LaRC. IAX (or equivalent) thermoplastic polyimide, and the fibers are, more specifically, Manganite IM7 (or equivalent) polyacrylonitrile- based carbon filaments that have a diameter of 5.2 m and are supplied in 12,000-filament tows. The present process stands in contrast to a prior process in which HYCARB tape was made by pressing boron fibers into the face of a wet carbon-fiber/ poly(amide acid) prepreg tape . that is, a prepreg tape from which the NMP solvent had not been removed. In the present process, one or more layer(s) of side-by-side boron fibers are pressed between dry prepreg tapes that have been prepared by the aforementioned gwet to dry h

Mechanical Properties of Natural Jute Fabric/Jute Mat Fiber Reinforced Polymer Matrix Hybrid Composites

Directory of Open Access Journals (Sweden)

Elsayed A. Elbadry

2012-01-01

Full Text Available Recycled needle punched jute fiber mats as a first natural fiber reinforcement system and these jute mats used as a core needle punched with recycled jute fabric cloths as skin layers as a second natural fiber reinforcement system were used for unsaturated polyester matrix composites via modifying the hand lay-up technique with resin preimpregnation into the jute fiber in vacuum. The effect of skin jute fabric on the tensile and bending properties of jute mat composites was investigated for different fiber weight contents. Moreover, the notch sensitivity of these composites was also compared by using the characteristic distance do calculated by Finite Element Method (FEM. The results showed that the tensile and flexural properties of jute mat composites increased by increasing the fiber weight content and by adding the jute fabric as skin layers. On the other hand, by adding the skins, the characteristic distance decreased and, therefore, the notch sensitivity of the composites increased. The fracture behavior investigated by SEM showed that extensive fiber pull-out mechanism was revealed at the tension side of jute mat composites under the bending load and by adding the jute cloth, the failure mode of jute mat was changed to fiber bridge mechanism.

Partial Replacement of Glass Fiber by Woven Kenaf in Hybrid Composites and its Effect on Monotonic and Fatigue Properties

Directory of Open Access Journals (Sweden)

Mohaiman Jaffar Sharba

2016-02-01

Full Text Available Natural–synthetic fiber hybrid composites offer a combination of high mechanical properties from the synthetic fibers and the advantages of renewable fibers to produce a material with highly specific and determined properties. In this study, plain-woven kenaf/glass reinforced unsaturated polyester (UP hybrid composites were fabricated using the hand lay-up method with a cold hydraulic press in a sandwich-configuration laminate. The glass was used as a shell with kenaf as a core, with an approximate total fiber content of 40%. Three glass/kenaf weight ratios percentages of (70/30% (H1, (55/45% (H2, and (30/70% (H3 were used to fabricate hybrid composites. Also pure glass/UP and kenaf/UP were fabricated for comparison purposes. Monotonic tests, namely tensile, compression, and flexural strengths of the composites, were performed. The morphological properties of tensile and compression failure of kenaf and hybrid composites were studied. In addition, uniaxial tensile fatigue life of hybrid composites were conducted and evaluated. The results revealed that the hybrid composite (H1 offered a good balance and the best static properties, but in tensile fatigue loading (H3 displayed low fatigue sensitivity when compared with the other hybrid composites.

Sequencing of allotetraploid cotton (Gossypium hirsutum L. acc. TM-1) provides a resource for fiber improvement.

Science.gov (United States)

Zhang, Tianzhen; Hu, Yan; Jiang, Wenkai; Fang, Lei; Guan, Xueying; Chen, Jiedan; Zhang, Jinbo; Saski, Christopher A; Scheffler, Brian E; Stelly, David M; Hulse-Kemp, Amanda M; Wan, Qun; Liu, Bingliang; Liu, Chunxiao; Wang, Sen; Pan, Mengqiao; Wang, Yangkun; Wang, Dawei; Ye, Wenxue; Chang, Lijing; Zhang, Wenpan; Song, Qingxin; Kirkbride, Ryan C; Chen, Xiaoya; Dennis, Elizabeth; Llewellyn, Danny J; Peterson, Daniel G; Thaxton, Peggy; Jones, Don C; Wang, Qiong; Xu, Xiaoyang; Zhang, Hua; Wu, Huaitong; Zhou, Lei; Mei, Gaofu; Chen, Shuqi; Tian, Yue; Xiang, Dan; Li, Xinghe; Ding, Jian; Zuo, Qiyang; Tao, Linna; Liu, Yunchao; Li, Ji; Lin, Yu; Hui, Yuanyuan; Cao, Zhisheng; Cai, Caiping; Zhu, Xiefei; Jiang, Zhi; Zhou, Baoliang; Guo, Wangzhen; Li, Ruiqiang; Chen, Z Jeffrey

2015-05-01

Upland cotton is a model for polyploid crop domestication and transgenic improvement. Here we sequenced the allotetraploid Gossypium hirsutum L. acc. TM-1 genome by integrating whole-genome shotgun reads, bacterial artificial chromosome (BAC)-end sequences and genotype-by-sequencing genetic maps. We assembled and annotated 32,032 A-subgenome genes and 34,402 D-subgenome genes. Structural rearrangements, gene loss, disrupted genes and sequence divergence were more common in the A subgenome than in the D subgenome, suggesting asymmetric evolution. However, no genome-wide expression dominance was found between the subgenomes. Genomic signatures of selection and domestication are associated with positively selected genes (PSGs) for fiber improvement in the A subgenome and for stress tolerance in the D subgenome. This draft genome sequence provides a resource for engineering superior cotton lines.

Applying the principles of welfare and quality of production in the organic farm of the laying hens

OpenAIRE

Jana Zdechovanová; Martin Mellen; Mária Angelovičová

2013-01-01

European Union  banned with Council Directive No. 74/1999/EC use of the conventional battery cages for laying hens in European Union with effect from January 1, 2012. By this time much attention was paid to the assessment of laying hens welfare in the modified breeding system,namely from aspect of behavior and expression fyziological stress. At present are used the enriched cages,   which device is defined by the Code of laying hens living conditions. Quantification of intensity and sequence...

Experimental and analytical study of high velocity impact on Kevlar/Epoxy composite plates

Science.gov (United States)

Sikarwar, Rahul S.; Velmurugan, Raman; Madhu, Velmuri

2012-12-01

In the present study, impact behavior of Kevlar/Epoxy composite plates has been carried out experimentally by considering different thicknesses and lay-up sequences and compared with analytical results. The effect of thickness, lay-up sequence on energy absorbing capacity has been studied for high velocity impact. Four lay-up sequences and four thickness values have been considered. Initial velocities and residual velocities are measured experimentally to calculate the energy absorbing capacity of laminates. Residual velocity of projectile and energy absorbed by laminates are calculated analytically. The results obtained from analytical study are found to be in good agreement with experimental results. It is observed from the study that 0/90 lay-up sequence is most effective for impact resistance. Delamination area is maximum on the back side of the plate for all thickness values and lay-up sequences. The delamination area on the back is maximum for 0/90/45/-45 laminates compared to other lay-up sequences.

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis

Directory of Open Access Journals (Sweden)

Tresna Soemardi

2010-10-01

Full Text Available This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite EPR 174 as matrix and Epoxy Hardener V-140 as hardener. The sample composite test made by hand lay up method. Multiaxial characteristic from ramie fiber reinforced epoxy composite will be compared with ISO standard for plastic/polymer for health application and refers strength of material application at Prosthetics and Orthotics. The analysis was completed with the mode of the failure and the failure criterion observation by using Scanning Electron Microscope (SEM. Based on results of the research could be concluded that ramie fiber reinforced epoxy composite could be developed further as the alternative material for socket prosthesis on Vf 40-50%. Results of the research will be discussed in more detail in this paper.

Molecular cloning and expression analysis of the synaptotagmin-1 gene in the hypothalamus and pituitary of Huoyan goose during different stages of the egg-laying cycle.

Science.gov (United States)

Luan, Xinhong; Luo, Lina; Cao, Zhongzan; Li, Rongrong; Liu, Dawei; Gao, Ming; Liu, Mei; Wang, Laiyou

2014-08-21

Synaptotagmin-1 (Syt1) is an abundant, evolutionarily conserved integral membrane protein that plays essential roles in neurotransmitter release and hormone secretion. Neurotransmitters secreted by hypothalamic neurons can alter GnRH (gonadotropin-releasing hormones) neuronal activity by binding to and activating specific membrane receptors in pituitary cells and, in turn, control the release of gonadotropin hormones from the pituitary gland. To reveal the influence of Syt1 on the process of goose egg-laying, we cloned and characterized the cDNA of goose Syt1 originating from hypothalamus and pituitary tissues of Huoyan goose and investigated the mRNA expression profiles during different stages of the egg-laying cycle. Hypothalamus and pituitary tissues were obtained from 36 Huoyan geese in the pre-laying period, early laying period, peak-laying period, and ceased period. The cDNA sequences of goose Syt1 were cloned and characterized from Huoyan goose tissues using 5'-RACE and 3'-RACE methods. Multiple alignments and phylogenetic analyses of the deduced Syt1 amino acid sequence were conducted using bioinformatics tools. The expression profiles of the Syt1 mRNA in the hypothalamus and pituitary during pre-laying, early laying, peak-laying and ceased period were examined using real-time PCR (qRT-PCR). The cDNA of Syt1 consisted of a 274 bp 5' UTR, a 1266 bp open reading frame (ORF) encoding 421 amino acids, and a 519 bp 3' UTR. The deduced amino acid sequence of goose Syt1 is highly conserved with the sequence from other species, especially with birds (more than 98%), and contains two protein kinase C2 conserved regions (C2 domain) from amino acids residue 157 to 259 and 288 to 402. The results of qRT-PCR demonstrated that the expression of Syt1 mRNA increased from the pre-laying period to the peak-laying period, reached its peak in the peak-laying period, and then decreased in the ceased period. To the best of our knowledge, this study is the first to obtain full

Effect of surface treatment on mechanical properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites

Energy Technology Data Exchange (ETDEWEB)

N, Karunagaran [S.K.P Engineering College, Tiruvannamalai (India); A, Rajadurai [Anna University, Chennai (India)

2016-06-15

This paper investigates the effect of surface treatment for glass fiber, stainless steel wire mesh on tensile, flexural, inter-laminar shear and impact properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites. The glass fiber fabric is surface treated either by 1 N solution of sulfuric acid or 1 N solution of sodium hydroxide. The stainless steel wire mesh is also surface treated by either electro dissolution or sand blasting. The hybrid composites are fabricated using epoxy resin reinforced with glass fiber and fine stainless steel wire mesh by hand lay-up technique at room temperature. The hybrid composite consisting of acid treated glass fiber and sand blasted stainless steel wire mesh exhibits a good combination of tensile, flexural, inter-laminar shear and impact behavior in comparison with the composites made without any surface treatment. The fine morphological modifications made on the surface of the glass fiber and stainless steel wire mesh enhances the bonding between the resin and reinforcement which inturn improved the tensile, flexural, inter-laminar shear and impact properties.

The effects of apple pulp and probiotic on performance, egg quality traits and blood parameters of laying hens

Directory of Open Access Journals (Sweden)

Shabaz Noranian

2016-11-01

Full Text Available Introduction Apple is one of the most important fruits that is produced in the large amount in Iran. It is a good source of vitamins and minerals and active fiber. Most of the apples that product in Iran are use in food industry for producing different kinds of apple juices. After Juicing, more than 20% of apple, remain as waste. The remained matter contain considerable amount of vitamins and minerals that usually found in fresh apple, moreover it is rich source of pectin and crude fiber. Generally this byproduct discharge to environment and cause some serious environmental problems. It is thought that use of apple pulp as a part of apple waste in laying hens diets not only prevent some environmental problems, but also can improve their performance, egg quality traits, and blood biochemical parameters and reduce the production cost. The current study has been designed to investigate these traits. Materials and Methods This experiment was carried out on 192 Hi-line (W36 laying hens in a completely randomized design as (2*2 factorial arrangement with two levels of apple pulp (0 and 4% and two levels of probiotic (protexin (0 and 0.005% in 4 treatments, 4 replicates and 12 birds per replicate for 12 weeks (65-76 weeks. Results and Discussion Using apple pulp and probiotic in diets improved the egg production performance, egg quality traits and blood parameters of laying hens (P0.05. Probiotic improved egg weight, egg production percentage, egg mass, feed conversion ratio and Haugh unit. In interaction effects, using apple pulp and probiotic improved the performance and egg quality traits of laying hens. The highest egg weight, egg production, egg mass and the best feed conversion were obtained with diet containing 4% apple pulp and 0.005% probiotic. Also the highest amount of albumin, eggshell thickness and Haugh unit were observed with 4% apple pulp and 0.05% probiotic. Apple pulp decreased the blood levels of triglyceride, cholesterol and albumin

Meso-modeling of Carbon Fiber Composite for Crash Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Lin, Shih-Po; Chen, Yijung; Zeng, Danielle; Su, Xuming

2017-04-06

In the conventional approach, the material properties for crash safety simulations are typically obtained from standard coupon tests, where the test results only provide single layer material properties used in crash simulations. However, the lay-up effects for the failure behaviors of the real structure were not considered in numerical simulations. Hence, there was discrepancy between the crash simulations and experimental tests. Consequently, an intermediate stage is required for accurate predictions. Some component tests are required to correlate the material models in the intermediate stage. In this paper, a Mazda Tube under high-impact velocity is chosen as an example for the crash safety analysis. The tube consists of 24 layers of uni-directional (UD) carbon fiber composite materials, in which 4 layers are perpendicular to, while the other layers are parallel to the impact direction. An LS-DYNA meso-model was constructed with orthotropic material models counting for the single-layer material behaviors. Between layers, a node-based tie-break contact was used for modeling the delamination of the composite material. Since fiber directions are not single-oriented, the lay-up effects could be an important effect. From the first numerical trial, premature material failure occurred due to the use of material parameters obtained directly from the coupon tests. Some parametric studies were conducted to identify the cause of the numerical instability. The finding is that the material failure strength used in the numerical model needs to be enlarged to stabilize the numerical model. Some hypothesis was made to provide the foundation for enlarging the failure strength and the corresponding experiments will be conducted to validate the hypothesis.

The complete genome sequence of human adenovirus 84, a highly recombinant new Human mastadenovirus D type with a unique fiber gene.

Science.gov (United States)

Kaján, Győző L; Kajon, Adriana E; Pinto, Alexis Castillo; Bartha, Dániel; Arnberg, Niklas

2017-10-15

A novel human adenovirus was isolated from a pediatric case of acute respiratory disease in Panama City, Panama in 2011. The clinical isolate was initially identified as an intertypic recombinant based on hexon and fiber gene sequencing. Based on the analysis of its complete genome sequence, the novel complex recombinant Human mastadenovirus D (HAdV-D) strain was classified into a new HAdV type: HAdV-84, and it was designated Adenovirus D human/PAN/P309886/2011/84[P43H17F84]. HAdV-D types possess usually an ocular or gastrointestinal tropism, and respiratory association is scarcely reported. The virus has a novel fiber type, most closely related to, but still clearly distant from that of HAdV-36. The predicted fiber is hypothesised to bind sialic acid with lower affinity compared to HAdV-37. Bioinformatic analysis of the complete genomic sequence of HAdV-84 revealed multiple homologous recombination events and provided deeper insight into HAdV evolution. Copyright © 2017 Elsevier B.V. All rights reserved.

Composition of some botanical mixtures as potential feed additives for laying hens

Directory of Open Access Journals (Sweden)

Varzaru Iulia

2015-01-01

Full Text Available The aim of this study was to assess the nutritional quality of four botanical mixtures (AFC: AFC 1 (containing red corn, pumpkin pulp and marigold, AFC 2 (containing alfalfa meal, pumpkin pulp and marigold, AFC 3 (containing kale, alfalfa meal, marigold and spinach leaves, AFC 4 (containing buckthorn, red corn, pumpkin pulp and marigold, in terms of proximate analysis (crude protein, crude fat, crude fiber, ash, amino acid (AA profile, vitamin E concentration and lutein and zeaxanthin content, in order to determine the potential of AFCs as feed additives in laying hens nutrition. The crude protein content for the analysed botanical mixtures ranged between 9.07-18.18% DM, and crude fiber between 10.41-30.83% DM. The amino acid profile of the mixture AFC 4 revealed a content of limiting essential amino acids required for laying hens: lysine 5.719% CP, methionine 1.058% CP and threonine 4.415% CP. The highest content of lutein and zeaxanthin was found in the mixture AFC 4 (66.659 mg/100 g, which also had the highest amount of vitamin E (640.93 mg/kg. With regard to safety of the botanical mixtures, lead and cadmium concentrations were determined. Concentration of lead ranged from 0.28-0.75 µg/g DM and 0.06-0.09 µg/g DM for concentration of cadmium, which was within the legislation of maximal limits of EU regulations. It can be concluded that the botanical mixture AFC 4 had the highest concentration of lutein, zeaxanthin and vitamin E, with an adequate content of essential amino acids. Furthermore, all four botanical mixtures had high amounts of xantophylls and should be tested in laying hens trials in order to establish their effects on lutein and zeaxanthin concentration in egg yolk.

A SHARED study-the benefits and costs of setting up a health research study involving lay co-researchers and how we overcame the challenges.

Science.gov (United States)

Mockford, Carole; Murray, Matt; Seers, Kate; Oyebode, Jan; Grant, Richard; Boex, Sue; Staniszewska, Sophie; Diment, Yvonne; Leach, Jim; Sharma, Uma; Clarke, Rosemary; Suleman, Rashida

2016-01-01

In the United Kingdom (UK), official bodies such as the Department of Health and research funders such as the National Institute for Health Research support and encourage lay involvement in all stages of research studies. The SHARED study has had substantial patient and public involvement (PPI) from developing the idea to dissemination. The aim of the study has been to develop recommendations led by service users for health and social care professionals to use at hospital discharge and in care planning for people living with memory loss and their carers. This article is about how the study started and the benefits, costs and challenges we encountered as the lead and lay co-researchers. Once we were successful with the grant application, we had to recruit and train the lay co-researchers and obtain various approvals before we could start the project. We had various support from funders, the Research Ethics Committee, lay members of Alzheimer's Society and from the lay co-researchers. However, we encountered some challenges with paying the lay co-researchers and with getting the approval for the co-researchers to interview staff on NHS premises. The challenges were overcome eventually but some aspects of the study changed because of this. We suggest that some changes could be made to the research system which would lead to greater inclusion of the lay co-researchers in research studies and would make the process more straightforward for the research team. Background Involving patients and the public in all stages of research has been the focus of the SHARED study. Patient and public involvement (PPI) is an important strategic priority for the Department of Health and funders such as the National Institute for Health Research. The aim of this paper is to describe the benefits, challenges and costs involved in setting up the research study with lay members as part of the research team. The study focused on developing service user-led recommendations for people with

Experimental Investigations on the effect of Additive on the Tensile Properties of Fiber Glass Fabric Lamina

Science.gov (United States)

Nava Sai Divya, A.; Raghu Kumar, B., Dr; Lakshmi Narayana, G., Dr

2017-09-01

The main objective of this work is to investigate the effect of additives on tensile behaviour of fiber glass fabric at lamina level to explore an alternative skin material for the outer body of aerospace applications and machines. This experimental work investigates the effect of silica concentration in epoxy resin lapox L-12 on the tensile properties of glass fabric lamina of 4H-satin weave having 3.6 mm thickness. The lamina was prepared by using hand lay-up method and tests were conducted on it. Various tensile properties values obtained from experimentation were compared for four glass fiber lamina composites fabricated by adding the silica powder to resin bath. The effect of variations in silica concentration (0% SiO2, 5% SiO2, 10% SiO2 and 15% SiO2) on the tensile properties of prepared material revealed that maximum stiffness was obtained at 15% and yield strength at 10% SiO2 concentration in glass fiber lamina. Increasing the silica concentration beyond 10% had led to deterioration in the material properties. The experimentation that was carried out on test specimen was reasonably successful as the effect of silica powder as an additive in glass fiber lamina enhanced the mechanical properties up to certain limit. The underpinning microscopic behaviour at the source of these observations will be investigated in a follow up work.

Avian metapneumovirus excretion in vaccinated and non-vaccinated specified pathogen free laying chickens.

Science.gov (United States)

Hess, M; Huggins, M B; Mudzamiri, R; Heincz, U

2004-02-01

Vaccinated and non-vaccinated specified pathogen-free White Leghorn laying chickens were challenged at peak of lay by the intravenous or oculonasal route with a virulent avian metapneumovirus (aMPV) subtype B chicken strain. Severe clinical signs and a drop in egg production were induced in the non-vaccinated intravenously challenged birds whereas the vaccinates were not affected. Live virus excretion was demonstrated in the faeces and respiratory tract of non-vaccinated hens for up to 7 days post intravenous challenge. After oculonasal challenge, virus excretion could only be demonstrated in the respiratory tract for up to 5 days. No live virus excretion was found in either the faeces or the respiratory tract of vaccinated birds. Concurrent with live virus isolation, the presence of viral RNA was demonstrated by single reverse transcription-polymerase chain reaction (RT-PCR). Nested RT-PCR was more sensitive and viral RNA could be detected in non-vaccinated birds up to 28 days post either intravenous or oculonasal challenge, at which time the experiment was terminated. Viral RNA was detected for up to 12 days in vaccinated birds. This is the first study investigating excretion of aMPV and viral RNA in vaccinated and non-vaccinated laying hens challenged under experimental conditions. The results are of importance with regard to the persistence of aMPV and the appropriate diagnostic detection method in laying birds.

Fatigue damage monitoring for basalt fiber reinforced polymer composites using acoustic emission technique

Science.gov (United States)

Wang, Wentao; Li, Hui; Qu, Zhi

2012-04-01

Basalt fiber reinforced polymer (BFRP) is a structural material with superior mechanical properties. In this study, unidirectional BFRP laminates with 14 layers are made with the hand lay-up method. Then, the acoustic emission technique (AE) combined with the scanning electronic microscope (SEM) technique is employed to monitor the fatigue damage evolution of the BFRP plates in the fatigue loading tests. Time-frequency analysis using the wavelet transform technique is proposed to analyze the received AE signal instead of the peak frequency method. A comparison between AE signals and SEM images indicates that the multi-frequency peaks picked from the time-frequency curves of AE signals reflect the accumulated fatigue damage evolution and fatigue damage patterns. Furthermore, seven damage patterns, that is, matrix cracking, delamination, fiber fracture and their combinations, are identified from the time-frequency curves of the AE signals.

Utilization of sunflower seed in laying hen rations

Directory of Open Access Journals (Sweden)

Tsuzuki ET

2003-01-01

Full Text Available The objective of this trial was to evaluate the effect of sunflower seed inclusion (0, 1.4, 2.8, 4.2 and 5.6% in a laying hen diet containing corn, soybean meal, wheat meal and soybean oil as main ingredients on performance and egg quality. The evaluated variables were daily feed intake, average egg weight, feed conversion (kg.kg-1 and kg.dz-1, eggshell percentage, yolk color and Haugh unit. One hundred and sixty 25 week-old Lohmann laying hens were used in a completely randomized design with five treatments and four replications of eight birds per experimental unit. Four periods of 28 days were evaluated during 112 days. The inclusion of sunflower seed in the diet had no effect on production parameters during the experimental period. Thus, can be concluded that sunflower seed might be used at concentrations up to 5.6% in laying hen diets without affecting performance and egg quality.

Wet-Lay Process - A Novel Approach to Scalable Fabrication of Tissue Scaffolds and Reinforcement Membranes

Science.gov (United States)

Wood, Andrew

Fibrous materials received a great deal of interest in the fields of tissue engineering and regenerative medicine due to the beneficial cell-interactions and tunable properties for various biomedical applications. These materials are highly advantageous as they provide a large surface area for cellular attachment, proliferation, high porosity values for cellular in-growth, and the ability to modify the membrane to achieve desired responses to both mechanical loading as well as environmental stimuli. A prominent method currently used to fabricate such membranes is electrospinning which uses electrostatic forces to produce fibers on the range of nanometers giving them high morphological saliency to the native extra cellular matrix (ECM). These fibers are also advantageous mechanically with strength and flexibility due to their larger aspect ratio when compared to larger diameter micro/macro fibers. While this spinning technique has many advantages and has seen the most quantity of research in recent years, it does have its own set of drawbacks. Among them is the use cytotoxic solvents during processing which must be fully removed before implantation. In addition, since the fiber produced have smaller diameters, the resulting average pore-size of the scaffold is decreased which in turn hinders cellular penetration into the bulk scaffold. In this work, we have proposed and characterized a novel method called wet-lay process for the rapid fabrication of fibrous membranes for tissue scaffolds. Wet-laying is a method common to textiles and paper industry but unexplored for tissue scaffolds. Short fibers are first suspended in an aqueous bath and homogeneously dispersed using shear force. After draining away the aqueous solution, a nonwoven fibro-porous membrane is deposited onto the draining screen. The implementation of wet-laid membranes into weak hydrogel matrices has shown a reinforcement effect for the composite. Further analyses were carried out to determine the

Influence of Coating with Some Natural Based Materials on the Erosion Wear Behavior of Glass Fiber Reinforced Epoxy Resin

OpenAIRE

Aseel Basim Abdul Hussein; Emad Saadi AL-Hassani; Reem Alaa Mohamed

2015-01-01

In the present study, composites were prepared by Hand lay-up molding. The composites constituents were epoxy resin as a matrix, 6% volume fractions of glass fibers (G.F) as reinforcement and 3%, 6% volume fractions of preparation natural material (Rice Husk Ash, Carrot Powder, and Sawdust) as filler. Studied the erosion wear behavior and coating by natural wastes (Rice Husk Ash) with epoxy resin after erosion. The results showed the non – reinforced epoxy have lower resistance erosion than n...

RNA sequencing reveals a slow to fast muscle fiber type transition after olanzapine infusion in rats.

Directory of Open Access Journals (Sweden)

Christopher J Lynch

Full Text Available Second generation antipsychotics (SGAs, like olanzapine, exhibit acute metabolic side effects leading to metabolic inflexibility, hyperglycemia, adiposity and diabetes. Understanding how SGAs affect the skeletal muscle transcriptome could elucidate approaches for mitigating these side effects. Male Sprague-Dawley rats were infused intravenously with vehicle or olanzapine for 24h using a dose leading to a mild hyperglycemia. RNA-Seq was performed on gastrocnemius muscle, followed by alignment of the data with the Rat Genome Assembly 5.0. Olanzapine altered expression of 1347 out of 26407 genes. Genes encoding skeletal muscle fiber-type specific sarcomeric, ion channel, glycolytic, O2- and Ca2+-handling, TCA cycle, vascularization and lipid oxidation proteins and pathways, along with NADH shuttles and LDH isoforms were affected. Bioinformatics analyses indicate that olanzapine decreased the expression of slower and more oxidative fiber type genes (e.g., type 1, while up regulating those for the most glycolytic and least metabolically flexible, fast twitch fiber type, IIb. Protein turnover genes, necessary to bring about transition, were also up regulated. Potential upstream regulators were also identified. Olanzapine appears to be rapidly affecting the muscle transcriptome to bring about a change to a fast-glycolytic fiber type. Such fiber types are more susceptible than slow muscle to atrophy, and such transitions are observed in chronic metabolic diseases. Thus these effects could contribute to the altered body composition and metabolic disease olanzapine causes. A potential interventional strategy is implicated because aerobic exercise, in contrast to resistance exercise, can oppose such slow to fast fiber transitions.

Gamma irradiation up to 109 rads of all silica fibers, comparison with polymer clad silica fibers and solid sample between 0.4 and 2.5 micrometers

International Nuclear Information System (INIS)

Boisde, G.; Bonnejean, C.; Perez, J.J.; Neumann, V.; Wurier, B.; Boucher, D.

1983-05-01

The effect of γ radiation (Co 60 ) on optical fibers is studied for investigations to remote measurement in irradiating environments. The spectral characteristics of PCS and AS silica fibers, PCS ''Wet'' and AS ''wet'' and ''superwet'' are compared. An automatic computerized system for measurement ''in situ'' is used between 0,4 AND 1,1 micron. Radiation-induced effects are examined at 840nm on PCS, AS with silicone, AS with epoxy (200 and 400/600μm) up to 5.10 8 rads. Samples of ''dry'', ''wet'', ''superwet'' and ''doped fluor'' silica are studied up to 1,3.10 9 rads between 0,3 and 2,5 μm. The photobleaching, the radiation hardening and the breakeage of PCS and AS-silicone after 10 7 rads are recognized. The spectral characteristics of a band at 610-630nm, a spectral deformation at 945nm for ''wet'' fibers and a peak of the radiation-induced attenuation are observed. The kinetic of the 630nm defect in silica fibers and silica samples is also investigated [fr

Implementation of new working methods in the floor-laying trade: Long-term effects on knee load and knee complaints

DEFF Research Database (Denmark)

Jensen, Lilli Kirkeskov; Friche, Claus

2010-01-01

This study compared floor laying using new working methods involving standing up, to the traditional methods involving working on one's knees.......This study compared floor laying using new working methods involving standing up, to the traditional methods involving working on one's knees....

Diabetes self-management education: acceptability of using trained lay educators.

Science.gov (United States)

Mandalia, P K; Stone, M A; Davies, M J; Khunti, K; Carey, M E

2014-11-01

The use of lay people to deliver education programmes for people with chronic conditions is a potential method of addressing healthcare staff capacity and increasing the cost efficiency of delivering education. This qualitative substudy is embedded within an equivalence trial (2008-2011 including development stage). In the qualitative substudy, we aimed to elicit the views of key stakeholders (patients, educators) about using lay people to deliver education to people recently diagnosed with type 2 diabetes, alongside a healthcare professional educator with an equal role. In this way, we sought to explore perceptions about acceptability and also contribute to understanding the reasons underlying positive or negative quantitative findings from main trial. We conducted 27 telephone interviews with a purposive sample of patients, lay educators and healthcare professional educators involved in the main trial. Thematic analysis of transcribed data was underpinned by the constant comparative approach and structured using Framework methodology. Overall, the data suggested that the use of lay educators was acceptable to educators and patients. Perceived difference in knowledge levels between lay and healthcare professional educators did not appear to have an impact on perceived acceptability or the effectiveness of the education received. Additional themes explored were related to peer status of educators and feasibility. Some concerns were raised about lay educators with diabetes, transferring personal issues and about the impact of healthcare professional time taken up by mentoring and supporting lay educators. Positive perceptions about the use of lay educators support the positive quantitative findings from the main trial. Acceptability is an important consideration in relation to implementation of the model of delivery studied. Concerns raised within the interviews should be considered in the design of training for lay educators. ISRCTN 99350009. Published by the BMJ

Fracture toughness of fibrous composite materials

Science.gov (United States)

Poe, C. C., Jr.

1984-01-01

Laminates with various proportions of 0 deg, 45 deg, and 90 deg plies were fabricated from T300/5208 and T300/BP-907 graphite/epoxy prepreg tape material. The fracture toughness of each laminate orientation or lay-up was determined by testing center-cracked specimens, and it was also predicted with the general fracture-toughness parameter. The predictions were good except when crack-tip splitting was large, at which time the toughness and strengths tended to be underpredicted. By using predictions, a parametric study was also made of factors that influence fracture toughness. Fiber and matrix properties as well as lay-up were investigated. Without crack-tip splitting, fracture toughness increases in proportion to fiber strength and fiber volume fraction, increases linearly with E(22)/E(11), is largest when the modulus for non-0 deg fibers is greater than that of 0 deg fibers, and is smallest for 0(m)/90(p)(s) lay-ups. (The E(11) and E(22) are Young's moduli of the lamina parallel to and normal to the direction of the fibers, respectively). For a given proportion of 0 deg plies, the most notch-sensitive lay-ups are 0(m)/90(p)(s) and the least sensitive are 0(m)/45(n)(s) and alpha(s). Notch sensitivity increases with the proportion of 0 deg plies and decreases with alpha. Strong, tough matrix materials, which inhibit crack-tip splitting, generally lead to minimum fracture toughness.

Mechanical and morphological characterizations of carbon fiber fabric reinforced epoxy composites used in aeronautical field

Directory of Open Access Journals (Sweden)

Jane Maria Faulstich de Paiva

2009-09-01

Full Text Available Carbon fiber reinforced composites (CFRC have been used in aeronautical industry in the manufacture of different aircraft components that must attend tight mechanical requirements. This paper shows a study involving mechanical (flexural, shear, tensile and compressive tests and morphological characterizations of four different laminates based on 2 epoxy resin systems (8552TM and F584TM and 2 carbon fiber fabric reinforcements (Plain Weave (PW and Eight Harness Satin (8HS. All laminates were obtained by handing lay-up of prepregs plies (0º/90º and consolidation in an autoclave following an appropriate curing cycle with vacuum and pressure. The results show that the F584-epoxy matrix laminates present better mechanical properties in the tensile and compressive tests than 8552 composites. It is also observed that PW laminates for both matrices show better flexural and interlaminar shear properties.

Computational Fatigue Life Analysis of Carbon Fiber Laminate

Science.gov (United States)

Shastry, Shrimukhi G.; Chandrashekara, C. V., Dr.

2018-02-01

In the present scenario, many traditional materials are being replaced by composite materials for its light weight and high strength properties. Industries like automotive industry, aerospace industry etc., are some of the examples which uses composite materials for most of its components. Replacing of components which are subjected to static load or impact load are less challenging compared to components which are subjected to dynamic loading. Replacing the components made up of composite materials demands many stages of parametric study. One such parametric study is the fatigue analysis of composite material. This paper focuses on the fatigue life analysis of the composite material by using computational techniques. A composite plate is considered for the study which has a hole at the center. The analysis is carried on (0°/90°/90°/90°/90°)s laminate sequence and (45°/-45°)2s laminate sequence by using a computer script. The life cycles for both the lay-up sequence are compared with each other. It is observed that, for the same material and geometry of the component, cross ply laminates show better fatigue life than that of angled ply laminates.

Treatment of Rural Wastewater Using a Spiral Fiber Based Salinity-Persistent Sequencing Batch Biofilm Reactor

Directory of Open Access Journals (Sweden)

Ying-Xin Zhao

2017-12-01

Full Text Available Differing from municipal wastewater, rural wastewater in salinization areas is characterized with arbitrary discharge and high concentration of salt, COD, nitrogen and phosphorus, which would cause severe deterioration of rivers and lakes. To overcome the limits of traditional biological processes, a spiral fiber based salinity-persistent Sequencing Biofilm Batch Reactor (SBBR was developed and investigated with synthetic rural wastewater (COD = 500 mg/L, NH4+-N = 50 mg/L, TP = 6 mg/L under different salinity (0.0–10.0 g/L of NaCl. Results indicated that a quick start-up could be achieved in 15 days, along with sufficient biomass up to 7275 mg/L. During operating period, the removal of COD, NH4+-N, TN was almost not disturbed by salt varying from 0.0 to 10.0 g/L with stable efficiency reaching 92%, 82% and 80%, respectively. Although TP could be removed at high efficiency of 90% in low salinity conditions (from 0.0 to 5.0 g/L of NaCl, it was seriously inhibited due to nitrite accumulation and reduction of Phosphorus Accumulating Organisms (PAOs after addition of 10.0 g/L of salt. The behavior proposed in this study will provide theoretical foundation and guidance for application of SBBR in saline rural wastewater treatment.

Digital gene-expression of alfalfa saponin extract on laying hens

Directory of Open Access Journals (Sweden)

Wenna Fan

2015-03-01

Full Text Available Cardiovascular disease is a major cause of death worldwide, so people are advised to limit their intake of dietary cholesterol [1]. Egg consumption has been seriously reduced because of the high levels of cholesterol [2]. The objective of this study was to evaluate the cholesterol metabolism effects of alfalfa saponin extract (ASE in liver and ovary tissues using digital gene-expression (DGE profiling analysis. The liver and ovary tissues were isolated from laying hens fed with ASE for RNA sequencing. Here, we provide detailed experimental methods and analysis pipeline in our study to identify digital gene expression of alfalfa saponin extract on laying hens and analysis pipeline published by Singh and colleagues in the PLOS ONE [3]. The data generated in our work provide meaningful information for understanding the molecular mechanisms underlying the cholesterol-lowering effects of ASE.

Lay Theories of Creativity

NARCIS (Netherlands)

Ritter, Simone; Rietzschel, Eric; Zedelius, Claire; Müller, Barbara; Schooler, Jonathan

2017-01-01

Creativity is of great appeal and importance to people, and they strive to understand creativity by developing lay theories. Such lay theories about creativity concern, for example, the characteristics of creative persons, such as the ‘mad genius’ idea, or environmental factors that contribute to

Dry sliding wear behavior of epoxy composite reinforced with short palmyra fibers

International Nuclear Information System (INIS)

Biswal, Somen; Satapathy, Alok

2016-01-01

The present work explores the possibility of using palmyra fiber as a replacement for synthetic fiber in conventional polymer composites for application against wear. An attempt has been made in this work to improve the sliding wear resistance of neat epoxy by reinforcing it with short palmyra fibers (SPF). Epoxy composites with different proportions (0, 4, 8 and 12 wt. %) of SPF are fabricated by conventional hand lay-up technique. Dry sliding wear tests are performed on the composite samples using a pin-on-disc test rig as per ASTM G 99-05 standards under various operating parameters. Design of experiment approach based on Taguchi's L16 Orthogonal Arrays is used for the analysis of the wear. This parametric analysis reveals that the SPF content is the most significant factor affecting the wear process followed by the sliding velocity. The sliding wear behavior of these composites under an extensive range of test conditions is predicted by a model based on the artificial neural network (ANN). A well trained ANN has been used to predict the sliding wear response of epoxy based composites over a wide range. (paper)

Highly porous oil sorbent based on hollow fibers as the interceptor for oil on static and running water

Energy Technology Data Exchange (ETDEWEB)

Dong, Ting [College of Textiles, Donghua University, Shanghai 201620 (China); Cao, Shengbin [College of Textiles, Donghua University, Shanghai 201620 (China); School of Mechanical Engineering, Shanghai Dianji University, Shanghai 201306 (China); Xu, Guangbiao, E-mail: guangbiao_xu@dhu.edu.cn [College of Textiles, Donghua University, Shanghai 201620 (China); Key Laboratory of Textile Science and Technology Ministry of Education, Donghua University, Shanghai 201620 (China)

2016-03-15

Highlights: • Highly porous sorbent was made up of kapok and PET fibers. • The sorbent was prepared by air-laying-bonding method. • The sorbent showed much higher oil sorption capacity than 100% loose kapok fibers. • The sorbent showed high intercepting efficiency to oils on water. • The runing of water significantly accelerated the oil leakage. - Abstract: Highly porous fibrous assembly made by kapok and hollow PET fibers was prepared by the air-laying-bonding method, and used as the interceptor for oils on static and running water. SEM showed that the vast majority of kapok and PET fibers in the assembly was intact and retained their hollow lumens, with the assembly's porosity high to 98.03%. Oil sorption tests exhibited that kapok/PET assembly could absorb 63.00 g/g of vegetable oil and 58.50 g/g of used motor oil, with high oil retention after 24 h dripping. In static condition of oil interception, the two oils started to leak at around 20 min for 10-mm thick kapok/PET wall. The time for that was prolonged with increasing the thickness of kapok/PET wall. After oil breakthrough, continuous oil leaking took place. The typical leakage was divided into three stages in which oils leaked separately in sharply increased rate, reduced rate and finally gently. In running condition, oils leaked in markedly quicker way than that in static condition, with initial leakage of oils shortened to less 6 min when the water ran at 60.35 ml/s. The leakage of oils was considerably accelerated with increasing running rates.

Highly porous oil sorbent based on hollow fibers as the interceptor for oil on static and running water

International Nuclear Information System (INIS)

Dong, Ting; Cao, Shengbin; Xu, Guangbiao

2016-01-01

Highlights: • Highly porous sorbent was made up of kapok and PET fibers. • The sorbent was prepared by air-laying-bonding method. • The sorbent showed much higher oil sorption capacity than 100% loose kapok fibers. • The sorbent showed high intercepting efficiency to oils on water. • The runing of water significantly accelerated the oil leakage. - Abstract: Highly porous fibrous assembly made by kapok and hollow PET fibers was prepared by the air-laying-bonding method, and used as the interceptor for oils on static and running water. SEM showed that the vast majority of kapok and PET fibers in the assembly was intact and retained their hollow lumens, with the assembly's porosity high to 98.03%. Oil sorption tests exhibited that kapok/PET assembly could absorb 63.00 g/g of vegetable oil and 58.50 g/g of used motor oil, with high oil retention after 24 h dripping. In static condition of oil interception, the two oils started to leak at around 20 min for 10-mm thick kapok/PET wall. The time for that was prolonged with increasing the thickness of kapok/PET wall. After oil breakthrough, continuous oil leaking took place. The typical leakage was divided into three stages in which oils leaked separately in sharply increased rate, reduced rate and finally gently. In running condition, oils leaked in markedly quicker way than that in static condition, with initial leakage of oils shortened to less 6 min when the water ran at 60.35 ml/s. The leakage of oils was considerably accelerated with increasing running rates.

Impact properties of aluminium - glass fiber reinforced plastics sandwich panels

Directory of Open Access Journals (Sweden)

Mathivanan Periasamy

2012-06-01

Full Text Available Aluminium - glass fiber reinforced plastics (GFRP sandwich panels are hybrid laminates consisting of GFRP bonded with thin aluminum sheets on either side. Such sandwich materials are increasingly used in airplane and automobile structures. Laminates with varying aluminium thickness fractions, fiber volume fractions and orientation in the layers of GFRP were fabricated by hand lay up method and evaluated for their impact performance by conducting drop weight tests under low velocity impacts. The impact energy required for initiating a crack in the outer aluminium layer as well as the energy required for perforation was recorded. The impact load-time history was also recorded to understand the failure behavior. The damage depth and the damage area were measured to evaluate the impact resistance. Optical photography and scanning electron micrographs were taken to visualize the crack and the damage zone. The bidirectional cross-ply hybrid laminate (CPHL has been found to exhibit better impact performance and damage resistance than the unidirectional hybrid laminate (UDHL. Increase in aluminium thickness fraction (Al tf and fiber volume fraction (Vf resulted in an increase in the impact energy required for cracking and perforation. On an overall basis, the sandwich panels exhibited better impact performance than the monolithic aluminium.

Mechanical properties evaluation of single and hybrid composites polyester reinforced bamboo, PALF and coir fiber

Science.gov (United States)

Rihayat, T.; Suryani, S.; Fauzi, T.; Agusnar, H.; Wirjosentono, B.; Syafruddin; Helmi; Zulkifli; Alam, P. N.; Sami, M.

2018-03-01

This study aims to determine the composition fiber natural of bamboo, pineapple leaf and coir in single and hybrid composite to see the best characteristics of tensile strength and flexural test by using a Universal Testing Machine (UTM) and observe the effect on the microstructure of the composite through optical and scanning electron microscopy. Bamboo, Palf and coir have synthesis from natural fiber was used as reinforcement in polyester composite using hand lay up or a hot-compression moulding while filler:matrix was used (45%:55wt.%, 70%:30wt.% and 15%:85wt.%). From the variation of the volume fraction between filler and matrix show that mechanical properties of composites increased with increasing amount of filler in the matrix. This is evidenced by the high mechanical properties A:B:C/Ps in compositions 45%: 55wt.% 136 Mpa while flexural strength 93 N and good structure surface morphology. This research has produced a hybrid composite materials that have high mechanical properties and bending compared with conventional synthetic fibers and other materials.

Robustness in laying hens

NARCIS (Netherlands)

Star, L.

2008-01-01

The aim of the project ‘The genetics of robustness in laying hens’ was to investigate nature and regulation of robustness in laying hens under sub-optimal conditions and the possibility to increase robustness by using animal breeding without loss of production. At the start of the project, a robust

Finite-Element Analysis of Crack Arrest Properties of Fiber Reinforced Composites Application in Semi-Elliptical Cracked Pipelines

Science.gov (United States)

Wang, Linyuan; Song, Shulei; Deng, Hongbo; Zhong, Kai

2018-04-01

In nowadays, repair method using fiber reinforced composites as the mainstream pipe repair technology, it can provide security for X100 high-grade steel energy long-distance pipelines in engineering. In this paper, analysis of cracked X100 high-grade steel pipe was conducted, simulation analysis was made on structure of pipes and crack arresters (CAs) to obtain the J-integral value in virtue of ANSYS Workbench finite element software and evaluation on crack arrest effects was done through measured elastic-plastic fracture mechanics parameter J-integral and the crack arrest coefficient K, in a bid to summarize effect laws of composite CAs and size of pipes and cracks for repairing CAs. The results indicate that the K value is correlated with laying angle λ, laying length L2/D1, laying thickness T1/T2of CAs, crack depth c/T1 and crack length a/c, and calculate recommended parameters for repairing fiber reinforced composite CAs in terms of two different crack forms.

Fiber optic based OSL set up for online and offline measurements of dose due to ionizing radiation

International Nuclear Information System (INIS)

Rawat, N.S.; Kulkarni, M.S.; Upadhyay, B.N.; Srikanth, G.; Bindra, K.S.; Oak, S.M.

2016-01-01

An optic-fiber dosimetry system based on optically stimulated luminescence (OSL) and radio-luminescence (RL) from Al_2O_3 : C single-crystal (detector) was designed and developed. The set up is intended to measure dose and dose rates at various radiological installations. The Al_2O_3:C single crystal (from Landaeur Inc. USA) was coupled to a fiber optic delivery system and OSL from the detector is stimulated via the optical fiber cable using light from a Nd:YAG laser. OSL and RL signals are later used to predict cumulative dose and dose rates using "6"0Co gamma source. (author)

48 CFR 1371.117 - Lay days.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Lay days. 1371.117 Section... REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.117 Lay days. Insert clause 1352.271-86, Lay Days, in all solicitations and contracts for ship repair. ...

48 CFR 1252.217-75 - Lay days.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Lay days. 1252.217-75... SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1252.217-75 Lay days. As prescribed at (TAR) 48 CFR 1217.7001(c) and (e), insert the following clause: Lay Days (OCT 1994) (a) Lay day...

48 CFR 1352.271-86 - Lay days.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Lay days. 1352.271-86... SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1352.271-86 Lay days. As prescribed in 48 CFR 1371.117, insert the following clause: Lay Days (APR 2010) (a) A lay day is defined as an...

USING RICE BRAN IN LAYING HEN DIETS

Directory of Open Access Journals (Sweden)

H ERSIN SAMLI

2006-10-01

Full Text Available Rice bran is an energy and protein rich ingredient used in poultry feeding. To balance energy and protein requirements. The purpose of this study is to examine the effects of rice bran on performance and egg quality during peak production of a commercial White laying strain of 22 week of age. Dietary treatments were consisted by inclusion of rice bran at 0, 5, 10 and 15% levels. Each treatment had 6 reps in which 12 birds were randomly assigned in wired fl oor battery cages equipped with nipple drinkers and through feeders. Layers accessed to feed and water freely. Lighting regimen was adjusted to 16h light/8h dark. The experiment lasted for 10 weeks. Overall results of the present experiment indicated that rice bran could be included up to 10% without any adverse affect on laying performance, egg quality and digestive organs.

Research on mechanical and sensoric set-up for high strain rate testing of high performance fibers

Science.gov (United States)

Unger, R.; Schegner, P.; Nocke, A.; Cherif, C.

2017-10-01

Within this research project, the tensile behavior of high performance fibers, such as carbon fibers, is investigated under high velocity loads. This contribution (paper) focuses on the clamp set-up of two testing machines. Based on a kinematic model, weight optimized clamps are designed and evaluated. By analyzing the complex dynamic behavior of conventional high velocity testing machines, it has been shown that the impact typically exhibits an elastic characteristic. This leads to barely predictable breaking speeds and will not work at higher speeds when acceleration force exceeds material specifications. Therefore, a plastic impact behavior has to be achieved, even at lower testing speeds. This type of impact behavior at lower speeds can be realized by means of some minor test set-up adaptions.

Leptin receptor signaling inhibits ovarian follicle development and egg laying in chicken hens

Science.gov (United States)

2014-01-01

Background Nutrition intake during growth strongly influences ovarian follicle development and egg laying in chicken hens, yet the underlying endocrine regulatory mechanism is still poorly understood. The relevant research progress is hindered by difficulties in detection of leptin gene and its expression in the chicken. However, a functional leptin receptor (LEPR) is present in the chicken which has been implicated to play a regulatory role in ovarian follicle development and egg laying. The present study targeted LEPR by immunizing against its extracellular domain (ECD), and examined the resultant ovarian follicle development and egg-laying rate in chicken hens. Methods Hens that have been immunized four times with chicken LEPR ECD were assessed for their egg laying rate and feed intake, numbers of ovarian follicles, gene expression profiles, serum lipid parameters, as well as STAT3 signaling pathway. Results Administrations of cLEPR ECD antigen resulted in marked reductions in laying rate that over time eventually recovered to the levels exhibited by the Control hens. Together with the decrease in egg laying rate, cLEPR-immunized hens also exhibited significant reductions in feed intake, plasma concentrations of glucose, triglyceride, high-density lipoprotein, and low-density lipoprotein. Parallelled by reductions in feed intake, mRNA gene expression levels of AgRP, orexin, and NPY were down regulated, but of POMC, MC4R and lepR up-regulated in Immunized hen hypothalamus. cLEPR-immunization also promoted expressions of apoptotic genes such as caspase3 in theca and fas in granulosa layer, but severely depressed IGF-I expression in both theca and granulosa layers. Conclusions Immunization against cLEPR ECD in egg-laying hens generated antibodies that mimic leptin bioactivity by enhancing leptin receptor transduction. This up-regulated apoptotic gene expression in ovarian follicles, negatively regulated the expression of genes that promote follicular development

Lay perspectives on lay health worker roles, boundaries and participation within three UK community-based health promotion projects.

Science.gov (United States)

South, J; Kinsella, K; Meah, A

2012-08-01

This paper examines lay interpretations of lay health worker roles within three UK community-based health promotion projects. It argues that understanding lay health worker roles requires critical analysis of the complex interrelationships between professionals, lay workers and the communities receiving a programme. Findings are presented that are drawn from a qualitative study of lay engagement in public health programme delivery where a key objective was to examine the perspectives of community members with the experience of receiving services delivered by lay health workers. Interviews and focus groups were conducted with 46 programme recipients from three case study projects; a breastfeeding peer support service, a walking for health scheme and a neighbourhood health project. The results show how participants interpreted the function and responsibilities of lay health workers and how those roles provided personalized support and facilitated engagement in group activities. Further insights into community participation processes are provided revealing the potential for active engagement in both formal and informal roles. The paper concludes that social relationships are core to understanding lay health worker programmes and therefore analysis needs to take account of the capacity for community members to move within a spectrum of participation defined by increasing responsibility for others.

Livebearing or egg-laying mammals: 27 decisive nucleotides of FAM168.

Science.gov (United States)

Pramanik, Subrata; Kutzner, Arne; Heese, Klaus

2017-05-23

In the present study, we determine comprehensive molecular phylogenetic relationships of the novel myelin-associated neurite-outgrowth inhibitor (MANI) gene across the entire eukaryotic lineage. Combined computational genomic and proteomic sequence analyses revealed MANI as one of the two members of the novel family with sequence similarity 168 member (FAM168) genes, consisting of FAM168A and FAM168B, having distinct genetic differences that illustrate diversification in its biological function and genetic taxonomy across the phylogenetic tree. Phylogenetic analyses based on coding sequences of these FAM168 genes revealed that they are paralogs and that the earliest emergence of these genes occurred in jawed vertebrates such as Callorhinchus milii. Surprisingly, these two genes are absent in other chordates that have a notochord at some stage in their lives, such as branchiostoma and tunicates. In the context of phylogenetic relationships among eukaryotic species, our results demonstrate the presence of FAM168 orthologs in vertebrates ranging from Callorhinchus milii to Homo sapiens, displaying distinct taxonomic clusters, comprised of fish, amphibians, reptiles, birds, and mammals. Analyses of individual FAM168 exons in our sample provide new insights into the molecular relationships between FAM168A and FAM168B (MANI) on the one hand and livebearing and egg-laying mammals on the other hand, demonstrating that a distinctive intermediate exon 4, comprised of 27 nucleotides, appears suddenly only in FAM168A and there in the livebearing mammals only but is absent from all other species including the egg-laying mammals.

Draft genome sequences of two commensal Enterococcus cecorum strains isolated from chickens in Belgium

DEFF Research Database (Denmark)

Dolka, Beata; Boyen, Filip; Butaye, Patrick

2015-01-01

Here, we report the draft genome sequences of two commensal Enterococcus cecorum strains (1710s23 and 1711s24), cultivated from the ceca of healthy laying hens originating from different farms in Belgium.......Here, we report the draft genome sequences of two commensal Enterococcus cecorum strains (1710s23 and 1711s24), cultivated from the ceca of healthy laying hens originating from different farms in Belgium....

Lay Consultations in Heart Failure Symptom Evaluation.

Science.gov (United States)

Reeder, Katherine M; Sims, Jessica L; Ercole, Patrick M; Shetty, Shivan S; Wallendorf, Michael

2017-01-01

Lay consultations can facilitate or impede healthcare. However, little is known about how lay consultations for symptom evaluation affect treatment decision-making. The purpose of this study was to explore the role of lay consultations in symptom evaluation prior to hospitalization among patients with heart failure. Semi-structured interviews were conducted with 60 patients hospitalized for acute decompensated heart failure. Chi-square and Fisher's exact tests, along with logistic regression were used to characterize lay consultations in this sample. A large proportion of patients engaged in lay consultations for symptom evaluation and decision-making before hospitalization. Lay consultants provided attributions and advice and helped make the decision to seek medical care. Men consulted more often with their spouse than women, while women more often consulted with adult children. Findings have implications for optimizing heart failure self-management interventions, improving outcomes, and reducing hospital readmissions.

Mechanical Properties of Steel Fiber Reinforced all Lightweight Aggregate Concrete

Science.gov (United States)

Yang, Y. M.; Li, J. Y.; Zhen, Y.; Nie, Y. N.; Dong, W. L.

2018-05-01

In order to study the basic mechanical properties and failure characteristics of all lightweight aggregate concrete with different volume of steel fiber (0%, 1%, 2%), shale ceramsite is used as light coarse aggregate. The shale sand is made of light fine aggregate and mixed with different volume of steel fiber, and the mix proportion design of all lightweight aggregate concrete is carried out. The cubic compressive strength, axial compressive strength, flexural strength, splitting strength and modulus of elasticity of steel fiber all lightweight aggregate concrete were studied. Test results show that the incorporation of steel fiber can restrict the cracking of concrete, improve crack resistance; at the same time, it shows good plastic deformation ability and failure morphology. It lays a theoretical foundation for further research on the application of all lightweight aggregate concrete in structural systems.

All-fiber hybrid photon-plasmon circuits: integrating nanowire plasmonics with fiber optics.

Science.gov (United States)

Li, Xiyuan; Li, Wei; Guo, Xin; Lou, Jingyi; Tong, Limin

2013-07-01

We demonstrate all-fiber hybrid photon-plasmon circuits by integrating Ag nanowires with optical fibers. Relying on near-field coupling, we realize a photon-to-plasmon conversion efficiency up to 92% in a fiber-based nanowire plasmonic probe. Around optical communication band, we assemble an all-fiber resonator and a Mach-Zehnder interferometer (MZI) with Q-factor of 6 × 10(6) and extinction ratio up to 30 dB, respectively. Using the MZI, we demonstrate fiber-compatible plasmonic sensing with high sensitivity and low optical power.

Investigation of a carbon fiber/epoxy prepreg curing behavior for thick composite materials production: An industrial case-study

Science.gov (United States)

Giorgini, Loris; Mazzocchetti, Laura; Minak, Giangiacomo; Dolcini, Enrico

2012-07-01

A case-study is presented, in cooperation with RI-BA Composites srl, where the industrial production of a thick part for primary structural application is analysed. The final product is a bulk carbon fiber reinforced object characterized by great dimensions, with thickness ranging between 10mm and 35mm and obtained by Hand-Lay-Up of prepregs. The study shows that prepregs age along the time required for the process work up. Moreover, the isothermal curing investigation of the prepreg used in the production gives some useful hint for the design of a new thermal curing cycle, in order to avoid exotherm problems along the thickness of the object. The effect of the applied curing cycle on thermal properties of the object are reported.

One-year follow-up of the phagocytic activity of leukocytes after exposure of rats to asbestos and basalt fibers.

Science.gov (United States)

Hurbánková, M

1994-01-01

The phagocytic activity of leukocytes in peripheral blood was investigated after 2, 24, and 48 hr; 1, 2, 4, and 8 weeks; and 6 and 12 months following intraperitoneal administration of asbestos and basalt fibers to Wistar rats. Asbestos and basalt fibers differed in their effects on the parameters studied. Both granulocyte count and phagocytic activity of leukocytes during the 1-year dynamic follow-up in both dust-exposed groups of animals changed in two phases, characterized by the initial stimulation of the acute phase I, followed by the suppression of the parameters in the chronic phase II. Exposure to asbestos and basalt fibers led, in phase II, to impairment of the phagocytic activity of granulocytes. Asbestos fibers also significantly decreased phagocytic activity of monocytes. Exposure to basalt fibers did not affect the phagocytic activity of monocytes in phase II. Results suggest that the monocytic component of leukocytes plays an important role in the development of diseases caused by exposure to fibrous dusts, but basalt fibers have lesser biological effects than asbestos fibers. PMID:7882931

Can trained lay providers perform HIV testing services? A review of national HIV testing policies.

Science.gov (United States)

Flynn, David E; Johnson, Cheryl; Sands, Anita; Wong, Vincent; Figueroa, Carmen; Baggaley, Rachel

2017-01-04

Only an estimated 54% of people living with HIV are aware of their status. Despite progress scaling up HIV testing services (HTS), a testing gap remains. Delivery of HTS by lay providers may help close this testing gap, while also increasing uptake and acceptability of HIV testing among key populations and other priority groups. 50 National HIV testing policies were collated from WHO country intelligence databases, contacts and testing program websites. Data regarding lay provider use for HTS was extracted and collated. Our search had no geographical or language restrictions. This data was then compared with reported data from the Global AIDS Response Progress Reporting (GARPR) from July 2015. Forty-two percent of countries permit lay providers to perform HIV testing and 56% permit lay providers to administer pre-and post-test counseling. Comparative analysis with GARPR found that less than half (46%) of reported data from countries were consistent with their corresponding national HIV testing policy. Given the low uptake of lay provider use globally and their proven use in increasing HIV testing, countries should consider revising policies to support lay provider testing using rapid diagnostic tests.

High-birefringent photonic crystal fiber

DEFF Research Database (Denmark)

Libori, Stig E. Barkou; Broeng, Jes; Knudsen, Erik

2001-01-01

A highly birefringent photonic crystal fiber design is analysed. Birefringence up to 10-3 is found. Random fluctuations in the cladding design are analysed, and the fiber is found to be a feasible polarization maintaining fiber.......A highly birefringent photonic crystal fiber design is analysed. Birefringence up to 10-3 is found. Random fluctuations in the cladding design are analysed, and the fiber is found to be a feasible polarization maintaining fiber....

48 CFR 3052.217-94 - Lay days (USCG).

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Lay days (USCG). 3052.217... CLAUSES Text of Provisions and Clauses 3052.217-94 Lay days (USCG). As prescribed in USCG guidance at (HSAR) 48 CFR 3017.9000(a) and (b), insert the following clause: Lay Days (DEC 2003) (a) Lay day time...

Effects of Interface Coating and Nitride Enhancing Additive on Properties of Hi-Nicalon SiC Fiber Reinforced Reaction-Bonded Silicon Nitride Composites

Science.gov (United States)

Bhatt, Ramakrishana T.; Hull, David R.; Eldridge, Jeffrey I.; Babuder, Raymond

2000-01-01

Strong and tough Hi-Nicalon SiC fiber reinforced reaction-bonded silicon nitride matrix composites (SiC/ RBSN) have been fabricated by the fiber lay-up approach. Commercially available uncoated and PBN, PBN/Si-rich PBN, and BN/SiC coated SiC Hi-Nicalon fiber tows were used as reinforcement. The composites contained approximately 24 vol % of aligned 14 micron diameter SiC fibers in a porous RBSN matrix. Both one- and two-dimensional composites were characterized. The effects of interface coating composition, and the nitridation enhancing additive, NiO, on the room temperature physical, tensile, and interfacial shear strength properties of SiC/RBSN matrix composites were evaluated. Results indicate that for all three coated fibers, the thickness of the coatings decreased from the outer periphery to the interior of the tows, and that from 10 to 30 percent of the fibers were not covered with the interface coating. In the uncoated regions, chemical reaction between the NiO additive and the SiC fiber occurs causing degradation of tensile properties of the composites. Among the three interface coating combinations investigated, the BN/SiC coated Hi-Nicalon SiC fiber reinforced RBSN matrix composite showed the least amount of uncoated regions and reasonably uniform interface coating thickness. The matrix cracking stress in SiC/RBSN composites was predicted using a fracture mechanics based crack bridging model.

Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up

Science.gov (United States)

Davila, Yves; Crouzeix, Laurent; Douchin, Bernard; Collombet, Francis; Grunevald, Yves-Henri

2017-08-01

Reinforcement angle orientation has a significant effect on the mechanical properties of composite materials. This work presents a methodology to introduce variable reinforcement angles into finite element (FE) models of composite structures. The study of reinforcement orientation variations uses meta-models to identify and control a continuous variation across the composite ply. First, the reinforcement angle is measured through image analysis techniques of the composite plies during the lay-up phase. Image analysis results show that variations in the mean ply orientations are between -0.5 and 0.5° with standard deviations ranging between 0.34 and 0.41°. An automatic post-treatment of the images determines the global and local angle variations yielding good agreements visually and numerically between the analysed images and the identified parameters. A composite plate analysed at the end of the cooling phase is presented as a case of study. Here, the variation in residual strains induced by the variability in the reinforcement orientation are up to 28% of the strain field of the homogeneous FE model. The proposed methodology has shown its capabilities to introduce material and geometrical variability into FE analysis of layered composite structures.

Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up

Science.gov (United States)

Davila, Yves; Crouzeix, Laurent; Douchin, Bernard; Collombet, Francis; Grunevald, Yves-Henri

2018-06-01

Reinforcement angle orientation has a significant effect on the mechanical properties of composite materials. This work presents a methodology to introduce variable reinforcement angles into finite element (FE) models of composite structures. The study of reinforcement orientation variations uses meta-models to identify and control a continuous variation across the composite ply. First, the reinforcement angle is measured through image analysis techniques of the composite plies during the lay-up phase. Image analysis results show that variations in the mean ply orientations are between -0.5 and 0.5° with standard deviations ranging between 0.34 and 0.41°. An automatic post-treatment of the images determines the global and local angle variations yielding good agreements visually and numerically between the analysed images and the identified parameters. A composite plate analysed at the end of the cooling phase is presented as a case of study. Here, the variation in residual strains induced by the variability in the reinforcement orientation are up to 28% of the strain field of the homogeneous FE model. The proposed methodology has shown its capabilities to introduce material and geometrical variability into FE analysis of layered composite structures.

Scale-up of Novel Low-Cost Carbon Fibers Leading to High-Volume Commercial Launch

Energy Technology Data Exchange (ETDEWEB)

Spalding, Mark A [The Dow Chemical Company

2014-08-27

The project started in September, 2012 with the goal of scaling up from the existing laboratory scale process for producing carbon fiber (CF) from polyolefin (PO) based precursor fiber using a Dow proprietary sulfonation-desulfonation stabilization process. The award was used to develop a process that was capable of producing market development quantities of CF from PO precursor fiber at a rate of 4 kg/h of CF. The CF would target properties that met or exceeded the Department of Energy (DOE) Vehicles Technology [1] standard; i.e., 172 GPa modulus and 1.72 GPa strength at greater than or equal to 1% strain. The Dow proprietary process was capable of meeting and exceeding these targets properties. Project DE-EE0005760 resulted from a Collaborative Research and Development Agreement (CRADA) between Dow and Oak Ridge National Laboratory (ORNL) with support from the Michigan Economic Development Corporation (MEDC) and DOE. In the first budget period, the main goal was to design a sulfonation-desulfonation market development plant capable of stabilizing PO precursor fiber at a rate of 5 kg/h using a sulfonation solution. The detailed design, location, and cost estimate were determined as scheduled in the Project Management Plan (PMP). In parallel with this DOE award project was a fundamentals and economic evaluation funded by The Dow Chemical Company (Dow). The goal of the Dow sponsored project was to finalize the mass balances, energy balances, and levelized cost to produce CF using the Dow process. A Go-No-Go decision was scheduled in June, 2013 based on the findings of the DOE sponsored scale up project and the Dow sponsored project. In June, 2013, Dow made the No-Go decision to halt and abandon the Dow proprietary sulfonation-desulfonation process for stabilizing PO precursor fibers for the manufacturing of CF. This No-Go decision was identified in the original proposal and at the start of this project, and the decision was made as scheduled. The decision was based

Laying-up of sterile instruments in the operating theatre: equal or superior protection by using a horizontal unidirectional air flow system.

Science.gov (United States)

Traversari, A A L; Goedhart, C A; Dusseldorp, E; Bode, A; Keuning, F; Pelk, M S J; Vos, M C

2013-10-01

A system for the preparation of sterilized instruments with unidirectional horizontal air flow (UDHF) has several advantages over a unidirectional down flow system (UDDF). The advantages are based on the installation of the system being more flexible and easier to use, no cooling of the air flow being necessary and less air being needed for circulation, resulting in reduced energy use. The objective of this study was to determine whether a system with UDHF performs equal or superior to a system with UDDF in terms of prevention of contamination of the air (the presence of particles and micro-organisms) during the laying-up process. The degree of protection (DP) offered by two UDHF system variants and two UDDF system variants was determined for several static set-ups and a dynamic simulation of the process. In addition to determining the level of protection for several categories of particle size, colony-forming units (CFU) were also measured during process simulations. When maximum protection (no particles present) is considered, the UDHF systems performed significantly better than the UDDF systems for particles ≥2.5μm. When particles were present, there was no significant difference between systems for particles ≥0.3 and ≥0.5μm. However, the performance of the UDHF system was superior to that of the UDDF system (DP) for particles ≥1.0μm representing the bacteria-carrying particles. During the process measurements, no CFU were found with the UDDF system in 64% of the measurements, compared with 90% for the UDHF system (P = 0.012). The UDHF system offers equal or superior protection to the UDDF system against contamination of the clean area within which the laying up takes place. Despite our finding that the differences did not always reach statistical significance (due to low background concentrations), there is a clear trend, from the small-sized particles (≥1.0μm) up to the largest sizes considered, including bacteria-carrying particles, that

Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

International Nuclear Information System (INIS)

Alavudeen, A.; Rajini, N.; Karthikeyan, S.; Thiruchitrambalam, M.; Venkateshwaren, N.

2015-01-01

Highlights: • This paper is presents the fabrications of kenaf/banana fiber hybrid composites. • Effect of weaving pattern and random orientation on mechanical properties was studied. • Role of interfacial adhesion due to chemical modifications were analyzed with the aid of SEM. • Hybridization of kenaf and banana fibers in plain woven composites exhibits maximum mechanical strength. - Abstract: The present work deals with the effect of weaving patterns and random orientatation on the mechanical properties of banana, kenaf and banana/kenaf fiber-reinforced hybrid polyester composites. Composites were prepared using the hand lay-up method with two different weaving patterns, namely, plain and twill type. Of the two weaving patterns, the plain type showed improved tensile properties compared to the twill type in all the fabricated composites. Furthermore, the maximum increase in mechanical strength was observed in the plain woven hybrid composites rather than in randomly oriented composites. This indicates minimum stress development at the interface of composites due to the distribution of load transfer along the fiber direction. Moreover, alkali (NaOH) and sodium lauryl sulfate (SLS) treatments appear to provide an additional improvement in mechanical strength through enhanced interfacial bonding. Morphological studies of fractured mechanical testing samples were performed by scanning electron microscopy (SEM) to understand the de-bonding of fiber/matrix adhesion

Laser backlight unit based on a leaky optical fiber

Science.gov (United States)

Okuda, Yuuto; Onoda, Kousuke; Fujieda, Ichiro

2012-07-01

A backlight unit is constructed by laying out an optical fiber on a two-dimensional plane and letting the light leak out in a controlled manner. In experiment, we formed multiple grooves on the surface of a plastic optical fiber by pressing a heated knife edge. The depth of the groove determined the percentage of the optical power leaking out. The optical fiber with multiple grooves was embedded in an acrylic plate with a spiral trench, and a diffuser sheet was placed over it. When we injected laser light into the end of the optical fiber, this configuration successfully worked as an area illuminator. However, the coherent nature of the laser light caused severe speckle noise. We evaluated the speckle contrast under darkness, and it varied from 80% to 23%, depending on the lens aperture used to capture the images of the illuminator. We glued an ultrasound generator to the optical fiber to introduce phase modulation for the light propagating inside the optical fiber. In this way, the speckle contrast was reduced by a factor of seven to four. Under room lighting, the speckle noise was made barely noticeable by turning on the ultrasound generator.

Polymer-Derived Ceramic Fibers

Science.gov (United States)

Ichikawa, Hiroshi

2016-07-01

SiC-based ceramic fibers are derived from polycarbosilane or polymetallocarbosilane precursors and are classified into three groups according to their chemical composition, oxygen content, and C/Si atomic ratio. The first-generation fibers are Si-C-O (Nicalon) fibers and Si-Ti-C-O (Tyranno Lox M) fibers. Both fibers contain more than 10-wt% oxygen owing to oxidation during curing and lead to degradation in strength at temperatures exceeding 1,300°C. The maximum use temperature is 1,100°C. The second-generation fibers are SiC (Hi-Nicalon) fibers and Si-Zr-C-O (Tyranno ZMI) fibers. The oxygen content of these fibers is reduced to less than 1 wt% by electron beam irradiation curing in He. The thermal stability of these fibers is improved (they are stable up to 1,500°C), but their creep resistance is limited to a maximum of 1,150°C because their C/Si atomic ratio results in excess carbon. The third-generation fibers are stoichiometric SiC fibers, i.e., Hi-Nicalon Type S (hereafter Type S), Tyranno SA, and Sylramic™ fibers. They exhibit improved thermal stability and creep resistance up to 1,400°C. Stoichiometric SiC fibers meet many of the requirements for the use of ceramic matrix composites for high-temperature structural application. SiBN3C fibers derived from polyborosilazane also show promise for structural applications, remain in the amorphous state up to 1,800°C, and have good high-temperature creep resistance.

Lay-offs in the Blended Economy

OpenAIRE

Singh J P

2002-01-01

Recent reports suggest that the Government of India is favourably inclined to change policy and enable establishments employing less than 1,000 workers to lay-off employees and undertake retrenchments or closures without prior permission. Corporate lay-offs in the U.S. indicate an ever-increasing trend and do not make a comforting reading. The year 2001 for example, saw the highest number of job cuts in the Fortune 500 companies than in any year ever since the survey of lay-offs were launched...

Preparation of Thermoplastic Polyimide Ultrafine Fiber Nonwovens by Electrospinning

Directory of Open Access Journals (Sweden)

CHEN Jun

2018-02-01

Full Text Available The superfine fiber of thermoplastic polyimide(LPI, whose average diameter ranges from 0.36μm to 1.47μm, was prepared through electrospinning with DMAc as solvent. It lays a good foundation for the mass preparation of LPI non-woven. The influence of electrospinning process conditions, including LPI concentration, flow rate and voltage, on morphology of LPI fiber was investigated systematically. The results show that the average diameter increases and the fibers diameter distribution turns wider with the LPI concentration increasing from 22%(mass fraction, same as below to 30%. Meanwhile, when the concentration is rather lower, some cambiform fibers can be observed. As the concentration increases, the cambiform fiber disappears. While the concentration increases continually, the fibers are adhered to be flakiness. The change of the spinning voltage makes little difference on the average diameter of fibers; the average diameter of fibers increases with the increase of the flow rate of LPI solution; when the flow rate is more than 1.5mL/h, the fibers start to be adhered, the cambiform fibers appear while the flow rate is over 1.8mL/h. Through optimizing the process, the LPI fibers with average diameter of 1.18μm were prepared under 30℃ with the conditions of 28% concentration, 15kV voltage, 1.2mL/h flow rate and the 25cm receiving distance.

Training Lay Interventionists to Support Tobacco Cessation among Teachers in India.

Science.gov (United States)

Aghi, Mira; Nagler, Eve; Lando, Harry; Pednekar, Mangesh; Gupta, Prakash; Sorensen, Glorian

2016-01-01

Despite the rapidly increasing burden of tobacco-related morbidity and mortality in low- and middle-income countries, tobacco control initiatives - especially cessation - receive little emphasis. This is true despite low-cost methods that have potential for widespread dissemination. The purpose of this paper is to provide a case study example of how lay interventionists may be trained and supported to facilitate tobacco use cessation, based on the successful Tobacco Free Teachers-Tobacco Free Society program (TFT-TFS) implemented in Bihar, India. This school-based program included multiple components, with lay interventionists having a crucial role. The lay interventionists included health educators and lead teachers, both of whom were selected based on formative research, underwent extensive training and received continuing support. We emphasized encouraging and supporting teachers to quit tobacco use and engaging both tobacco users and nonusers to create a supportive environment for cessation. We also stressed that neither the health educators nor lead teachers were being trained as counselors or as cessation experts. We focused on the importance of respecting teachers as individuals and identifying locally relevant methods of cessation. Although we cannot isolate the precise contribution of the lay interventionists to the successful TFT-TFS intervention, the abstinence findings in favor of the intervention at follow up are highly encouraging. Teachers have been neglected as lay interventionists for tobacco cessation despite the fact that they tend to be highly respected and credible. The approach used for TFT-TFS could be disseminable in multiple low- and middle-income country contexts through train-the-trainer programs targeted to teachers.

Impact of the lay-off length on +Gz tolerance.

Science.gov (United States)

Mikuliszyn, Romuald; Kowalski, Wieslaw; Kowalczuk, Krzysztof

2002-07-01

There are many factors affecting pilots' +Gz-tolerance. Recently, attention of the aviation community has been focused on lay-off and it's impact on +Gz-tolerance. Pilots of the Polish Air Force (PAF) have dealt with that problem for several years now. The aim of the study was to provide insight on how lay-off periods with different duration impact +Gz-tolerance. 95 male jet pilots from the PAF participated in the study. Every one had at least two weeks lay-off period (non-medical reasons). Subjects were divided into four groups according to the length of lay-off period (2-4 weeks; 5-13 weeks; 14-26 weeks; 27-154 weeks), All pilots were subjected to a centrifuge exposure in GOR (0.1 G/s) or ROR (1.0 G/s) profiles, depending on the pre-lay-off exposure. Post-lay-off exposures were carried out directly after lay-off. 18 jet pilots without any lay-off constituted the control group. The difference between pre- and post-lay-off G-tolerance limit (-0,93 +/- 0,53) was statistically significant (p<0.01) only for one group, where lay-off period ranged between two and four weeks. No statistically significant differences were found where influence of other factors like total and yearly flight hours, heart rate gain (AHR) or physical activity measured as maximal oxygen intake were considered. 2-4 weeks of lay-off period decreases +Gz tolerance is statistically significant manner. Subsequent increase of lay-off period does not result in mean tolerance changes for group, however in certain individuals critical decrement of +Gz tolerance occurs. Total and last year flying hours, physical fitness does not modify impact of lay-off period on +Gz tolerance.

Lay health worker experiences administering a multi-level combination intervention to improve PMTCT retention.

Science.gov (United States)

DiCarlo, Abby; Fayorsey, Ruby; Syengo, Masila; Chege, Duncan; Sirengo, Martin; Reidy, William; Otieno, Juliana; Omoto, Jackton; Hawken, Mark P; Abrams, Elaine J

2018-01-10

The recent scale-up of prevention of mother-to-child transmission of HIV (PMTCT) services has rapidly accelerated antiretroviral therapy (ART) uptake among pregnant and postpartum women in sub-Saharan Africa. The Mother and Infant Retention for Health (MIR4Health) study evaluates the impact of a combination intervention administered by trained lay health workers to decrease attrition among HIV-positive women initiating PMTCT services and their infants through 6 months postpartum. This was a qualitative study nested within the MIR4Health trial. MIR4Health was conducted at 10 health facilities in Nyanza, Kenya from September 2013 to September 2015. The trial intervention addressed behavioral, social, and structural barriers to PMTCT retention and included: appointment reminders via text and phone calls, follow-up and tracking for missed clinic visits, PMTCT health education at home visits and during clinic visits, and retention and adherence support and counseling. All interventions were administered by lay health workers. We describe results of a nested small qualitative inquiry which conducted two focus groups to assess the experiences and perceptions of lay health workers administering the interventions. Discussions were recorded and simultaneously transcribed and translated into English. Data were analyzed using framework analysis approach. Study findings show lay health workers played a critical role supporting mothers in PMTCT services across a range of behavioral, social, and structural domains, including improved communication and contact, health education, peer support, and patient advocacy and assistance. Findings also identified barriers to the uptake and implementation of the interventions, such as concerns about privacy and stigma, and the limitations of the healthcare system including healthcare worker attitudes. Overall, study findings indicate that lay health workers found the interventions to be feasible, acceptable, and well received by clients. Lay

Lay and peer counsellors to reduce leprosy-related stigma--lessons learnt in Cirebon, Indonesia.

Science.gov (United States)

Lusli, Mimi; Peters, Ruth M H; Zweekhorst, Marjolein B M; Van Brakel, Wim H; Seda, Francisia S S E; Bunders, Joske F G; Irwanto

2015-03-01

Counselling has been identified as a promising strategy to reduce stigma. Lay and peer counsellors have provided counselling in various fields, but this has not yet been studied in the field of leprosy. The Stigma Assessment and Reduction of Impact (SARI) project in Cirebon District, Indonesia took up this endeavour. This paper describes the initial experiences based on the perspectives of the lay and peer counsellors and aims to provide lessons learnt for future initiatives. The selection of lay and peer counsellors was based upon pre-defined criteria such as completed junior high school and level of confidence. This study draws on the notes of seven monitoring and evaluation meetings and 21 group discussions the main researcher facilitated with the lay and peer counsellors and the notes written by the lay and peer counsellors on the sessions with their clients. In total, 198 people affected by leprosy were offered counselling by the 11 lay and 12 peer counsellors; 145 accepted this offer. The other 53 either did not need counselling or did not want to participate for example due to worries about disclosure. Effective communication skills such as listening and asking effective questions were important, but also difficult to acquire for the lay and peer counsellors. Sharing personal experiences was highly appreciated by clients and stimulated a deepened reflection. Challenges related to concealment and effective skills exist, but some people affected by leprosy and others can become effective counsellors making it at the outset a challenging but nevertheless promising intervention.

Evaluation of Fiber Bragg Grating and Distributed Optical Fiber Temperature Sensors

International Nuclear Information System (INIS)

McCary, Kelly Marie

2017-01-01

Fiber optic temperature sensors were evaluated in the High Temperature Test Lab (HTTL) to determine the accuracy of the measurements at various temperatures. A distributed temperature sensor was evaluated up to 550C and a fiber Bragg grating sensor was evaluated up to 750C. HTTL measurements indicate that there is a drift in fiber Bragg sensor over time of approximately -10C with higher accuracy at temperatures above 300C. The distributed sensor produced some bad data points at and above 500C but produced measurements with less than 2% error at increasing temperatures up to 400C

Evaluation of Fiber Bragg Grating and Distributed Optical Fiber Temperature Sensors

Energy Technology Data Exchange (ETDEWEB)

McCary, Kelly Marie [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-04-01

Fiber optic temperature sensors were evaluated in the High Temperature Test Lab (HTTL) to determine the accuracy of the measurements at various temperatures. A distributed temperature sensor was evaluated up to 550C and a fiber Bragg grating sensor was evaluated up to 750C. HTTL measurements indicate that there is a drift in fiber Bragg sensor over time of approximately -10C with higher accuracy at temperatures above 300C. The distributed sensor produced some bad data points at and above 500C but produced measurements with less than 2% error at increasing temperatures up to 400C

Whole genome sequencing of Gyeongbuk Araucana, a newly developed blue-egg laying chicken breed, reveals its origin and genetic characteristics.

Science.gov (United States)

Jeong, Hyeonsoo; Kim, Kwondo; Caetano-Anollés, Kelsey; Kim, Heebal; Kim, Byung-Ki; Yi, Jun-Koo; Ha, Jae-Jung; Cho, Seoae; Oh, Dong Yep

2016-05-24

Chicken, Gallus gallus, is a valuable species both as a food source and as a model organism for scientific research. Here, we sequenced the genome of Gyeongbuk Araucana, a rare chicken breed with unique phenotypic characteristics including flight ability, large body size, and laying blue-shelled eggs, to identify its genomic features. We generated genomes of Gyeongbuk Araucana, Leghorn, and Korean Native Chicken at a total of 33.5, 35.82, and 33.23 coverage depth, respectively. Along with the genomes of 12 Chinese breeds, we identified genomic variants of 16.3 million SNVs and 2.3 million InDels in mapped regions. Additionally, through assembly of unmapped reads and selective sweep, we identified candidate genes that fall into heart, vasculature and muscle development and body growth categories, which provided insight into Gyeongbuk Araucana's phenotypic traits. Finally, genetic variation based on the transposable element insertion pattern was investigated to elucidate the features of transposable elements related to blue egg shell formation. This study presents results of the first genomic study on the Gyeongbuk Araucana breed; it has potential to serve as an invaluable resource for future research on the genomic characteristics of this chicken breed as well as others.

Effects of Octacosanol Extracted from Rice Bran on the Laying Performance, Egg Quality and Blood Metabolites of Laying Hens.

Science.gov (United States)

Peng, Kai; Long, Lei; Wang, Yuxi; Wang, Shunxi

2016-10-01

A 42-d study with 384 Hy-line brown laying hens was conducted to assess the effects of dietary octacosanol supplementation on laying performance, egg quality and blood metabolites of laying hens. Hens were randomly allocated into 4 dietary groups of 8 cages each, which were fed basal diet supplemented with 0 (Control), 9 (OCT9), 18 (OCT18), and 27 (OCT27) mg/kg diet of octacosanol isolated from rice bran, respectively. The experiment was conducted in an environmental controlled house and hens were fed twice daily for ad libitum intake. Laying performance was determined over the 42-d period, and egg quality as well as blood metabolites were estimated on d 21 and d 42. Diets in OCT18 and OCT27 increased (pfeed conversion rate and levels of total cholesterol, triglyceride and low density lipoprotein cholesterol in the serum as compared to those of Control. Feed intake, yolk color, yolk diameter, eggshell thickness and high density lipoprotein cholesterol were similar (p>0.05) among treatments. Results demonstrate that supplementing 18 to 27 mg/kg diet of rice bran octacosanol can improve laying rate and egg quality and reduce blood lipid of laying hens.

Free Vibration Analysis of Fiber Metal Laminate Annular Plate by State-Space Based Differential Quadrature Method

Directory of Open Access Journals (Sweden)

G. H. Rahimi

2014-01-01

Full Text Available A three-dimensional elasticity theory by means of a state-space based differential quadrature method is presented for free vibration analysis of fiber metal laminate annular plate. The kinds of composite material and metal layers are considered to be S2-glass and aluminum, respectively. A semianalytical approach which uses state-space in the thickness and differential quadrature in the radial direction is implemented for evaluating the nondimensional natural frequencies of the annular plates. The influences of changes in boundary condition, plate thickness, and lay-up direction on the natural frequencies are studied. A comparison is also made with the numerical results reported by ABAQUS software which shows an excellent agreement.

Egg-laying rhythm in Drosophila melanogaster

Indian Academy of Sciences (India)

2008-12-31

Dec 31, 2008 ... production of oocytes to egg-laying on selected sites (Alle- mand 1976b; Yang et al. .... (vii) Is the egg-laying rhythm regulated by hormones? .... were shown to be induced by factors synthesized in the re- productive tract of the ...

Interface enhancement of glass fiber reinforced vinyl ester composites with flame-synthesized carbon nanotubes and its enhancing mechanism.

Science.gov (United States)

Liao, Lingmin; Wang, Xiao; Fang, Pengfei; Liew, Kim Meow; Pan, Chunxu

2011-02-01

Interface enhancement with carbon nanotubes (CNTs) provides a promising approach for improving shock strength and toughness of glass fiber reinforced plastic (GFRP) composites. The effects of incorporating flame-synthesized CNTs (F-CNTs) into GFRP were studied, including on hand lay-up preparation, microstructural characterization, mechanical properties, fracture morphologies, and theoretical calculation. The experimental results showed that: (1) the impact strength of the GFRP modified by F-CNTs increased by more than 15% over that of the GFRP modified by CNTs from chemical vapor deposition; and (2) with the F-CNT enhancement, no interfacial debonding was observed at the interface between the fiber and resin matrix on the GFRP fracture surface, which indicated strong adhesive strength between them. The theoretical calculation revealed that the intrinsic characteristics of the F-CNTs, including lower crystallinity with a large number of defects and chemical functional groups on the surface, promoted their surface activity and dispersibility at the interface, which improved the interfacial bond strength of GFRP.

Nonlinear and hysteretic twisting effects in ocean cable laying

International Nuclear Information System (INIS)

Shashaty, A.J.

1983-01-01

Armored ocean cable unlays under the action of installation tensions and restraining moments applied by the ocean bottom and the ship's bow sheave. The process of elongation and twist is nonlinear and hysteretic. This process has often been assumed linear and reversible. The equations describing the moment which is developed in laying cable on the ocean bottom are worked out, without assuming linearity and reversibility. These equations are applied to some cases likely to arise. For a typical armored coaxial cable laid in 3700m (2,000 fathoms) depth without bottom tension, a steady-state laying-up moment of 134Nm (99 lbs. ft.) is developed. For the reversible case, no moment is developed. If the bottom tension is increased from zero to 33,375N (7500 lbs.) and then returned to zero, a peak moment of 198Nm (146 lbs. ft.) is developed

Third party interference monitoring based on distributed fiber sensor and field trail

Energy Technology Data Exchange (ETDEWEB)

Cai, Yongjun; Tan, Dongjie; Juan, Zheng; Wang, Likun; Chen, Pengchao [PetroChina Pipeline R and D Center (China)

2009-07-01

This paper describes a novel pipeline third party interference (TPI) monitoring system, which detects micro vibration along pipeline, through fiber cable laying in one ditch. A special optical path was designed by redundant optical fiber cores among fiber cable. This new sensor technology detects illegal excavation through detect phase changes. This innovative signal analysis technology avoids the disturbance of light intensity fluctuation and phase fading. Excavator, digging and impact of freely falling body were used to test this pipeline monitoring system. Different type of cable, such as straight buried cable, steel wire armored cable and silicone tube, were all test in order to test sensitivity. Field trail shows that this system can detect, alarm and. locate different third party interference along pipeline. (author)

Comparison of two different breeding systems laying hens in relation to egg shell quality, II

OpenAIRE

Mária Angelovičová; Viera Ševčíková; Marek Angelovič; Ondřej Bučko

2014-01-01

The aim of work was to follow up and statistically evaluate the selected quality indicators of egg shell according to two different breeding systems and different age of laying hens. An object of investigation were shell weight, share of the shell, strength and thickness of the shell for table eggs. There were used the laying hens of final hybrid ISA Brown reared in enriched cage system, and free range system. In both breeding systems were ensured the conditions with application of the welfar...

Task-shifting HIV counselling and testing services in Zambia: the role of lay counsellors

Directory of Open Access Journals (Sweden)

Kapanda Paul

2009-05-01

Full Text Available Abstract Background The human resource shortage in Zambia is placing a heavy burden on the few health care workers available at health facilities. The Zambia Prevention, Care and Treatment Partnership began training and placing community volunteers as lay counsellors in order to complement the efforts of the health care workers in providing HIV counselling and testing services. These volunteers are trained using the standard national counselling and testing curriculum. This study was conducted to review the effectiveness of lay counsellors in addressing staff shortages and the provision of HIV counselling and testing services. Methods Quantitative and qualitative data were collected by means of semistructured interviews from all active lay counsellors in each of the facilities and a facility manager or counselling supervisor overseeing counseling and testing services and clients. At each of the 10 selected facilities, all counselling and testing record books for the month of May 2007 were examined and any recordkeeping errors were tallied by cadre. Qualitative data were collected through focus group discussions with health care workers at each facility. Results Lay counsellors provide counselling and testing services of quality and relieve the workload of overstretched health care workers. Facility managers recognize and appreciate the services provided by lay counsellors. Lay counsellors provide up to 70% of counselling and testing services at health facilities. The data review revealed lower error rates for lay counsellors, compared to health care workers, in completing the counselling and testing registers. Conclusion Community volunteers, with approved training and ongoing supervision, can play a major role at health facilities to provide counselling and testing services of quality, and relieve the burden on already overstretched health care workers.

Detection of the Newcastle disease virus and its effect on development of post-vaccination immunity in a commercial flock of laying hens

Directory of Open Access Journals (Sweden)

Jana Jeřábková

2012-01-01

Full Text Available The aim of this study was to monitor the concentration of antibodies against Newcastle disease after vaccination of laying hens at the beginning and in the end of the laying period. The study was carried out in one commercial flock of laying hens in Opatovice in the Czech Republic in the years 2008-2010. A total of 280 samples of blood sera were taken from laying hens coming from four poultry houses. The sera were tested by the haemagglutination inhibition test according to the OIE Manual. Virological testing was conducted as a consequence of atypical results of serological testing. Newcastle disease virus RNA was proved by the RT-nested PCR method in the pooled tissue samples of 5 hens, in the samples of intestines with ileocaecal tonsila, in trachea and also in one swab sample from the environment of one house. Based on sequencing analysis and subsequent phylogenetic analysis, the virus was identified as a low pathogenic strain of paramyxovirus (PMV-1. This low pathogenic strain did not have any impact on the health of laying hens.

Standardising the Lay: Logics of Change in Programs of Disease Self-management

DEFF Research Database (Denmark)

Juul Nielsen, Annegrete; Grøn, Lone

2012-01-01

-managing patient is intended as a challenge to traditional medical authority by introducing lay methods of knowing disease. Rather than a meeting between authoritative professionals and vulnerable patients, the self-managing patient seeks to open up new spaces for a meeting between experts. The present paper...

Civil Justice: Lay Judges in the EU Countries

Directory of Open Access Journals (Sweden)

Stefan Machura

2016-06-01

Full Text Available Lay judges fulfill important functions for the justice system of a country. In the European Union member states, scholars have analysed the use of lay judges in criminal cases. However, little is known about lay participation in civil justice. The paper introduces commonly cited reasons to have lay judges as well as the principal forms of lay participation and then surveys the EU countries for its implementation in civil cases. Mixed tribunals, involving lay judges under the leadership of a professional judge, are relatively frequent. Several countries have special labour courts or commercial courts with lay members and others have single lay judges, or all-lay judge panels. Roughly a third of the 28 EU member states have no lay participation in civil justice but only three of those have no lay judges in any branch of the courts. Almost all the reasons for including lay decision makers are served somehow by the existing forms, including providing different experiences and perhaps expert knowledge. The article concludes, citing non-EU states and lay participation in criminal and administrative courts as further evidence, that lay judges in one form or another are an element of European legal systems. Los jueces legos cumplen funciones importantes para el sistema de justicia de un país. En los Estados miembro de la Unión Europea, académicos han analizado el uso de jueces legos en casos criminales. Sin embargo, se sabe poco acerca de la participación de los legos en la justicia civil. El artículo presenta las razones que habitualmente se citan para tener jueces legos, así como las formas principales de la participación de legos, para a continuación medir su implementación en casos civiles en los países de la Unión Europea. Son relativamente frecuentes los tribunales mixtos, en los que participan jueces legos, bajo la dirección de un juez profesional. Varios países tienen tribunales laborales especiales o tribunales comerciales con

Design and test of a novel accelerometer made-up of an optical-fiber embedded within a polymer resin

Directory of Open Access Journals (Sweden)

Tihon Pierre

2015-01-01

Full Text Available This paper presents a transducer for an optical-fiber accelerometer based on a polarization analysis. The transducer is made up of a fiber section embedded within a resin placed between two metallic pieces. Due to the acceleration, the resin is crushed between the metallic pieces, deforming the fiber section and inducing birefringence in the latter. This birefringence modifies the light polarization state, which can be used as an acceleration measurement. The sensor characteristics (sensitivity and resonance frequency are numerically and experimentally determined. Sine accelerations at 120 Hz with amplitudes going from 5 m/s2 to 13 m/s2 have been successfully measured. The resonance frequency for the transducer crushing mode is above 5000 Hz, but low-frequency vibration modes exist, disturbing the measurements.

Effect of Lamina Thickness of Prepreg on the Surface Accuracy of Carbon Fiber Composite Space Mirrors

Science.gov (United States)

Yang, Zhiyong; Tang, Zhanwen; Xie, Yongjie; Shi, Hanqiao; Zhang, Boming; Guo, Hongjun

2018-02-01

Composite space mirror can completely replicate the high-precision surface of mould by replication process, but the actual surface accuracy of the replication composite mirror always decreases. Lamina thickness of prepreg affects the layers and layup sequence of composite space mirror, and which would affect surface accuracy of space mirror. In our research, two groups of contrasting cases through finite element analyses (FEA) and comparative experiments were studied; the effect of different lamina thicknesses of prepreg and corresponding lay-up sequences was focused as well. We describe a special analysis model, validated process and result analysis. The simulated and measured surface figures both get the same conclusion. Reducing lamina thickness of prepreg used in replicating composite space mirror is propitious to optimal design of layup sequence for fabricating composite mirror, and could improve its surface accuracy.

Airborne gamma-ray spectrometer and magnetometer survey, Point Lay Quadrangle, Alaska. Volume I. Final report

International Nuclear Information System (INIS)

1981-02-01

The results obtained from an airborne high sensitivity gamma-ray spectrometer and magnetometer survey over the Point Lay map area of Alaska are presented. Based on the criteria outlined in the general section on interpretation, a total of six uranium anomalies have been indicated on the interpretation map. All six are only weakly to moderately anomalous in either uranium or the uranium ratios. None of these are thought to be of any economic significance. No follow-up work is recommended for the Point Lay Quadrangle

Teaching a lay theory before college narrows achievement gaps at scale.

Science.gov (United States)

Yeager, David S; Walton, Gregory M; Brady, Shannon T; Akcinar, Ezgi N; Paunesku, David; Keane, Laura; Kamentz, Donald; Ritter, Gretchen; Duckworth, Angela Lee; Urstein, Robert; Gomez, Eric M; Markus, Hazel Rose; Cohen, Geoffrey L; Dweck, Carol S

2016-06-14

Previous experiments have shown that college students benefit when they understand that challenges in the transition to college are common and improvable and, thus, that early struggles need not portend a permanent lack of belonging or potential. Could such an approach-called a lay theory intervention-be effective before college matriculation? Could this strategy reduce a portion of racial, ethnic, and socioeconomic achievement gaps for entire institutions? Three double-blind experiments tested this possibility. Ninety percent of first-year college students from three institutions were randomly assigned to complete single-session, online lay theory or control materials before matriculation (n > 9,500). The lay theory interventions raised first-year full-time college enrollment among students from socially and economically disadvantaged backgrounds exiting a high-performing charter high school network or entering a public flagship university (experiments 1 and 2) and, at a selective private university, raised disadvantaged students' cumulative first-year grade point average (experiment 3). These gains correspond to 31-40% reductions of the raw (unadjusted) institutional achievement gaps between students from disadvantaged and nondisadvantaged backgrounds at those institutions. Further, follow-up surveys suggest that the interventions improved disadvantaged students' overall college experiences, promoting use of student support services and the development of friendship networks and mentor relationships. This research therefore provides a basis for further tests of the generalizability of preparatory lay theories interventions and of their potential to reduce social inequality and improve other major life transitions.

Automatic start-up system of nuclear reactor based on sequence control technology

International Nuclear Information System (INIS)

Zhang Yao; Zhang Dafa; Peng Huaqing

2009-01-01

A conceptive design of an automatic start-up system based on the sequence control for the nuclear reactors is given in this paper, so as to solve the problems during the start-up process, such as the long operation time, low automatic control level and high accident rate. The start-up process and its requirements are analyzed in detail at first. Then,the principle, the architecture, the key technologies of the automatic start-up system of nuclear reactors are designed and discussed. With the designed system, the automatic start-up of the nuclear reactor can be realized,the work load of the operator can be reduced,and the safety and efficiency of the nuclear power plant during its start-up can be improved. (authors)

INVESTIGATIONS ON THE NATURAL EGG LAYING HABITS OF DOMESTIC GEESE

Directory of Open Access Journals (Sweden)

Monika Pandur

2000-06-01

Full Text Available The present study was based on the examination of the natural egg laying habits of domestic geese. The authors studied Grey Landes geese during the summer laying period. On the day of arrival of the birds a TyniTalk II artificial egg was placed in each nest. These eggs contain a microchip which detects and records data on the temperature of the surroundings. The results obtained demonstrate that after laying a certain number of eggs females laying under natural conditions sit on the nest not only when laying new eggs, but also to warm the eggs in it. The time devoted to warming increases with the laying period.

Scintillating-fiber imaging detector for 14-MeV neutrons

International Nuclear Information System (INIS)

Ress, D.; Lerche, R.A.; Ellis, R.J.; Heaton, G.W.; Nelson, M.B.; Mant, G.; Lehr, D.E.

1994-01-01

The authors have created a detector to image the neutrons emitted by imploded inertial-confinement fusion targets. The 14-MeV neutrons, which are produced by deuterium-tritium fusion events in the target, pass through an aperture to create an image on the detector. The neutron radiation is converted to blue light (430 nm) with a 20-cm-square array of plastic scintillating fibers. Each fiber is 10-cm long with a 1-mm-square cross section; approximately 35-thousand fibers make up the array. The resulting blue-light image is reduced and amplified by a sequence of fiber-optic tapers and image intensifiers, then acquired by a CCD camera. The fiber-optic readout system was tested optically for overall throughput the resolution. The authors plan to characterize the scintillator array reusing an ion-beam neutron source as well as DT-fusion neutrons emitted by inertial confinement targets. Characterization experiments will measure the light-production efficiency, spatial resolution, and neutron scattering within the detector. Several neutron images of laser-fusion targets have been obtained with the detector. Several neutron images of laser-fusion targets have been obtained with the detector. They describe the detector and their characterization methods, present characterization results, and give examples of the neutron images

Starting-up sequence of the AWEC-6 0 wind turbine; Secuencia de Arranaue del Aerogenerador AWEC-60

Energy Technology Data Exchange (ETDEWEB)

Avia, F.; Cruz, M. de la

1991-07-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions This report shows the graphic Information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m diameter and 1200 kW of rated power, recorded in April 1991 and covering all the operation range between cut-in and cut-out wind speed. (Author) 2 refs.

Superficial view of fiber to the home (FTTH)

Science.gov (United States)

Li, Xiaolin

2004-04-01

For the past few years, telecom companies have been working diligently to provide us with pseudo-broadband Internet connections over copper (DSL) and cable (cable modem). I use the term "pseudo-broadband" because the existing telecom infrastructure can only provide speeds of up to 1.5 megabits per second. (In theory, cable modem can provide up to 2.5 megabits per second, but in reality nobody obtains these speeds because the shared aspects of cable modem results in lower speeds.) No doubt improvements will be made over the next few years to squeeze more out of copper and cable, but it doesn't matter, because fiber to the home is coming, and it will be here faster than most people predict. In case you're wondering, FTTH provides download speeds of up to 155 megabits per second -- that's 100 times faster than the pseudo-broadband DSL and cable modem connections. Can you say instantaneous data transfer? Can you say, video on demand? SBC and Bellsouth are two of the telecom giants pioneering FTTH. The initial markets are new residential construction, because you don't have to dig up streets in an existing neighborhood to lay the fiber optic cable. SBC plans to wire 6,000 homes in a community in San Francisco by late next year. Initial net connections will only be about 5 MB/second -- far from the theoretical maximum of 155 MB/second, but still blazingly fast compared to DSL and cable modem. BellSouth is also pioneering FTTH with a trial project involving more than 400 people in the Atlanta suburb of Dunwoody. These individuals have Internet connections of about 10 MB/second! No doubt there will be stumbles along the way to providing FTTH. No doubt there are challenges to making FTTH cost effective. No doubt it will take years before most residences in the world have true broadband Internet access.

Applying the principles of welfare and quality of production in the organic farm of the laying hens

Directory of Open Access Journals (Sweden)

Jana Zdechovanová

2013-07-01

Full Text Available European Union  banned with Council Directive No. 74/1999/EC use of the conventional battery cages for laying hens in European Union with effect from January 1, 2012. By this time much attention was paid to the assessment of laying hens welfare in the modified breeding system,namely from aspect of behavior and expression fyziological stress. At present are used the enriched cages,   which device is defined by the Code of laying hens living conditions. Quantification of intensity and sequence of the events in different behaviour and a time regime can contribute to knowledge of time spending of the laying hens  in the breeding area and to determining of prioritizing their behavior.The aim of our research was assessment an application of principles laying hens welfare in the farm, their production and egg quality. An object of investigation was ecological farm of laying hens. In the experiment were observed thehousing conditions and nutrition of laying hens in farm, egg production, egg weight at laying hens old 42 weeks and selected indicators of chemical formation of the eggs. In the farm were reared laying hens ISA Brown, which are high-productive and the most   the most widely used in EU. The informations and data on farm, laying hen hall, breeding facility, breeding conditions, the behavior of the laying hens, nutrition, feeding and egg production were obtained by personal visit an organic farm and informations which  the farmer records and stores. The informations about the behavior of laying hens were obtained by observing and comparing with the knowledge and data of the Slovak Government regulation on December 11, 2002, which   minimum standards determine for the protection of laying hens.The informations on feed were obtained  directly from an organic farm and   feed company that followed by accordance  the minimum content of nutrients and energy in accordance with the needs of the laying hens. Egg production was

Long term strain behavior of PMMA based polymer optical fibers

DEFF Research Database (Denmark)

Bundalo, Ivan-Lazar; Nielsen, Kristian; Woyessa, Getinet

2015-01-01

We are reporting on the viscoelasticity of PMMA based Fiber Bragg Grating (FBG) strain sensors when exposed to repeated sequences of long term strain and relaxation with various duty-cycles. In terms of the FBG wavelength and how it follows the strain cycle, we have shown that in the small strain...... regime (up to 1%) an elastic-dominated fast relaxing range, which is followed by a mainly viscous relaxation, depends both on the strain level and on the strain duration. For a small ratio of the strain-relax durations, this fast relaxation range stays almost the same. However, with increasing strain...... duration, for the same relaxation time, this range will be shortened, which might influence the sensing capabilities of the fiber sensor....

View of the inner part of the VO prototype box. The WLS fibers wrapped up in teflon strips are coupled to connectors which ensure the passage of the light outside the box and its transfer in optical fibers.

CERN Multimedia

2004-01-01

View of the inner part of the VO prototype box. The WLS fibers wrapped up in teflon strips are coupled to connectors which ensure the passage of the light outside the box and its transfer in optical fibers.

10-channel fiber array fabrication technique for parallel optical coherence tomography system

Science.gov (United States)

Arauz, Lina J.; Luo, Yuan; Castillo, Jose E.; Kostuk, Raymond K.; Barton, Jennifer

2007-02-01

Optical Coherence Tomography (OCT) shows great promise for low intrusive biomedical imaging applications. A parallel OCT system is a novel technique that replaces mechanical transverse scanning with electronic scanning. This will reduce the time required to acquire image data. In this system an array of small diameter fibers is required to obtain an image in the transverse direction. Each fiber in the array is configured in an interferometer and is used to image one pixel in the transverse direction. In this paper we describe a technique to package 15μm diameter fibers on a siliconsilica substrate to be used in a 2mm endoscopic probe tip. Single mode fibers are etched to reduce the cladding diameter from 125μm to 15μm. Etched fibers are placed into a 4mm by 150μm trench in a silicon-silica substrate and secured with UV glue. Active alignment was used to simplify the lay out of the fibers and minimize unwanted horizontal displacement of the fibers. A 10-channel fiber array was built, tested and later incorporated into a parallel optical coherence system. This paper describes the packaging, testing, and operation of the array in a parallel OCT system.

Electrically tunable Brillouin fiber laser based on a metal-coated single-mode optical fiber

Directory of Open Access Journals (Sweden)

S.M. Popov

Full Text Available We explore tunability of the Brillouin fiber laser employing Joule heating. For this purpose, 10-m-length of a metal-coated single-mode optical cavity fiber has been directly included into an electrical circuit, like a conductor wire. With the current up to ∼3.5 A the laser tuning is demonstrated over a spectrum range of ∼400 MHz. The observed laser line broadening up to ∼2 MHz is explained by frequency drift and mode-hoping in the laser caused by thermal noise. Keywords: Brillouin fiber laser, Metal-coated optical fiber, Laser tuning, Fiber sensors

Experimental Investigation and Analysis of Mercerized and Citric Acid Surface Treated Bamboo Fiber Reinforced Composite

Science.gov (United States)

De, Jyotiraman; Baxi, R. N., Dr.

2017-08-01

Mercerization or NaOH fiber surface treatment is one of the most popular surface treatment processes to make the natural fibers such as bamboo fibers compatible for use as reinforcing material in composites. But NaOH being a chemical is hazardous and polluting to the nature. This paper explores the possibility of use of naturally derived citric acid for bamboo fiber surface treatment and its comparison with NaOH treated Bamboo Fiber Composites. Untreated, 2.5 wt% NaOH treated and 5 wt% citric acid treated Bamboo Fiber Composites with 5 wt% fiber content were developed by Hand Lay process. Bamboo mats made of bamboo slivers were used as reinforcing material. Mechanical and physical characterization was done to compare the effects of NaOH and citric acid bamboo fiber surface treatment on mechanical and physical properties of Bamboo Fiber Composite. The experiment data reveals that the tensile and flexural strength was found to be highest for citric acid and NaOH treated Bamboo Fiber Composite respectively. Water absorption tendency was found more than the NaOH treated Bamboo Fiber Composites. SEM micrographs used to analyze the morphology of fracture surface of tensile test specimens confirm improvement in fiber-matrix interface bonding due to surface treatment of bamboo fibers.

Lay-friendliness in translated Patient Information Leaflets

DEFF Research Database (Denmark)

Jensen, Matilde Nisbeth; Zethsen, Karen Korning

This paper seeks to empirically explore the claim that translated Danish Patient Information Leaflets (PILs) are less lay-friendly than their English source texts. The last two decades have seen an increased focus on providing patients with lay-friendly, easily understood information, enabling them...... to make informed decisions concerning their health. For this purpose, many new genres have been created, one such genre being the PIL, a mandatory text which in an EU context has to accompany all medication informing patients about dosage, side effects etc. Legally, the PIL genre is required to ensure lay......-friendly information as it must be “written and designed to be clear and understandable, enabling the users to act appropriately” (Article 63(2) of EU Directive 2001/83/EC). Despite the legal requirements and the intensified focus on lay-friendly health communication, many studies have shown that PILs are often...

Comparison of two different breeding systems laying hens in relation to egg damage and dirty, I

Directory of Open Access Journals (Sweden)

Mária Angelovičová

2014-11-01

Full Text Available The aim of work was to follow up and statistically evaluate the damage and dirty eggs and egg weight, depending on two different breeding systems and different ages of laying hens. Object of investigation were table eggs, their damage and dirty in the laying hens of the final hybrid ISA Brown reared in enriched cage system, and the free range system.  In both rearing systems were ensured the conditions for laying hens in accordance with legislation establishing minimum standards for the laying hens minimum standards for the protection of laying hens, protection of animals kept for farming purposes in accordance with the principles of the so-called five freedoms. That was used to feed a complete feed mixture HYD 10 in both breeding systems. The feeders were supplemented with feed by hand every day and the same day were supplemented water to drinking troughs.  Egg collection was hand in both breeding systems. This paper is a contribution to the solution of optimal breeding hens and production of high quality and safe of table eggs. Based on the results was formulated conclusion, which shows that to the damage and dirty eggs are not affected by the age of the breeding system and age of laying hens. Statistically significant difference     (p ≤ 0.05 in the egg weight was observed between breeding cage system and breeding free range system and   between age 30 and 40 weeks of laying hens.

RFID-over-Fiber system for agricultural exploitations - Wireless track and trace with range extension using optical fiber

DEFF Research Database (Denmark)

Madsen, Peter; Suhr, Lau Frejstrup; Cavalcante, Lucas Costa Pereira

2015-01-01

This paper proposes and demonstrates an RFIDover-Fiber wireless track and trace system using active RFID tags and operating over distances up to 30 km of optical fiber and 35 meters of wireless readability......This paper proposes and demonstrates an RFIDover-Fiber wireless track and trace system using active RFID tags and operating over distances up to 30 km of optical fiber and 35 meters of wireless readability...

Monitoring Poisson's ratio of glass fiber reinforced composites as damage index using biaxial Fiber Bragg Grating sensors

OpenAIRE

Yılmaz, Çağatay; Yilmaz, Cagatay; Akalın, Çağdaş; Akalin, Cagdas; Kocaman, Esat Selim; Suleman, A.; Yıldız, Mehmet; Yildiz, Mehmet

2016-01-01

Damage accumulation in Glass Fiber Reinforced Polymer (GFRP) composites is monitored based on Poisson's ratio measurements for three different fiber stacking sequences subjected to both quasi-static and quasi-static cyclic tensile loadings. The sensor systems utilized include a dual-extensometer, a biaxial strain gage and a novel embedded-biaxial Fiber Bragg Grating (FBG) sensor. These sensors are used concurrently to measure biaxial strain whereby the evolution of Poisson's ratio as a functi...

What are lay theories of social class?

Science.gov (United States)

Varnum, Michael E W

2013-01-01

Numerous studies have documented the effects of social class on psychological and behavioral variables. However, lay beliefs about how social class affects these dimensions have not been systematically tested. Studies 1 and 2 assessed lay beliefs about the association between social class and 8 variables (including psychological and behavioral tendencies and cognitive ability). Study 3 assessed lay beliefs about the Big five personality traits and social class, and study 4 reframed the 8 variables from study 1 in opposite terms and yielded similar results. Study 5 contained the variables framed as in both studies 1 and 4, and replicated those results suggesting that framing effects were not responsible for the effects observed. Interestingly, for the most part lay beliefs about social class did not differ as a function of participants' own social class. In general people held relatively accurate and consistent stereotypes about the relationship between social class and well-being, health, intelligence, and neuroticism. In contrast lay beliefs regarding social class and reasoning styles, as well as relational, social, and emotional tendencies were less consistent and coherent. This work suggests that on the whole people's beliefs about social class are not particularly accurate, and further that in some domains there are contradictory stereotypes about the consequences of social class.

Lay health advisers: scoping the role and intervention landscape.

Science.gov (United States)

Carr, Susan M; Lhussier, Monique; Forster, Natalie

2017-01-01

The use of lay health advisers has become an established approach within public health, in particular for impact on health inequalities and engaging socially excluded groups. Evidence on how differences in terms of the multiple role dimensions impact the outcomes of programs is limited. This creates ambiguity for decision makers on which roles should be implemented in different contexts for different needs. This paper applies realist logic to an inquiry to explore the mechanisms that may operate in lay-led intervention models and understand how, why, and in what respect these lead to particular outcomes. It draws on a project focusing on health-related lifestyle advisers and further insights gained from a subsequent related project about outreach with traveler communities. Analysis highlights multiple and potentially interacting aspects of lay health-adviser roles that may influence their success, including characteristics of lay health advisers, characteristics of target populations, purpose or intent of interventions, and how advice is given. A model is proposed from which to examine the contexts and mechanisms of lay health advisers that may impact outcomes, and is subsequently applied to two examples of reported lay health-adviser interventions. The combination of skills and characteristics of lay health advisers must be considered when planning which interventions might be appropriate when targeting specific needs or target populations. Focus only on the peer/layperson distinction may overlook other potentially important skills and mechanisms of action integral to lay health-adviser roles.

Evaluation of the HIV lay counselling and testing profession in South Africa.

Science.gov (United States)

Mwisongo, Aziza; Mehlomakhulu, Vuyelwa; Mohlabane, Neo; Peltzer, Karl; Mthembu, Jacque; Van Rooyen, Heidi

2015-07-22

With the launch of the national HIV Counselling and Testing (HCT) campaign in South Africa (SA), lay HIV counsellors, who had been trained in blood withdrawal, have taken up the role of HIV testing. This study evaluated the experiences, training, motivation, support, supervision, and workload of HIV lay counsellors and testers in South Africa. The aim was to identify gaps in their resources, training, supervision, motivation, and workload related to HCT services. In addition it explored their experiences with providing HIV testing under the task shifting context. The study was conducted in eight of South Africa's nine provinces. 32 lay counsellors were recruited from 67 HCT sites, and were interviewed using two questionnaires that included structured and semi-structured questions. One questionnaire focused on their role as HIV counsellors and the other on their role as HIV testers. Ninety-seven percent of counsellors reported that they have received training in counselling and testing. Many rated their training as more than adequate or adequate, with 15.6% rating it as not adequate. Respondents reported a lack of standardised counselling and testing training, and revealed gaps in counselling skills for specific groups such as discordant couples, homosexuals, older clients and children. They indicated health system barriers, including inadequate designated space for counselling, which compromises privacy and confidentiality. Lay counsellors carry the burden of counselling and testing nationally, and have other tasks such as administration and auxiliary duties due to staff shortages. This study demonstrates that HCT counselling and testing services in South Africa are mainly performed by lay counsellors and testers. They are challenged by inadequate work space, limited counselling skills for specific groups, a lack of standardised training policies and considerable administrative and auxiliary duties. To improve HCT services, there needs to be training needs with a

Optical Fiber Fusion Splicing

CERN Document Server

Yablon, Andrew D

2005-01-01

This book is an up-to-date treatment of optical fiber fusion splicing incorporating all the recent innovations in the field. It provides a toolbox of general strategies and specific techniques that the reader can apply when optimizing fusion splices between novel fibers. It specifically addresses considerations important for fusion splicing of contemporary specialty fibers including dispersion compensating fiber, erbium-doped gain fiber, polarization maintaining fiber, and microstructured fiber. Finally, it discusses the future of optical fiber fusion splicing including silica and non-silica based optical fibers as well as the trend toward increasing automation. Whilst serving as a self-contained reference work, abundant citations from the technical literature will enable readers to readily locate primary sources.

Effect of γ-irradiation on the optical and electrical properties of fiber reinforced composites

International Nuclear Information System (INIS)

Anwar, Ahmad; Elfiky, Dalia; Ramadan, Ahmed M.; Hassan, G.M.

2017-01-01

The effect of gamma irradiation on the optical and electrical properties of the reinforced fiber polymeric based materials became an important issue. Fiberglass/epoxy and Kevlar fiber/epoxy were selected as investigated samples manufactured with hand lay-up without autoclave curing technique. The selected technique is simple and low cost while being rarely used in space materials production. The electric conductivity and dielectric constant for those samples were measured with increasing the gamma radiation dose. Moreover, the absorptivity, band gap and color change were determined. Fourier transform infrared (FTIR) was performed to each of the material's constituent to evaluate the change in the investigated materials due to radiation exposure dose. In this study, the change of electrical properties for both investigated materials showed a slight variation of the test parameters with respect to the gamma dose increase; this variation is placed in the insulators rang. The tested samples showed an insulator stable behavior during the test period. The change of optical properties for both composite specimens showed the maximum absorptivity at the gamma dose 750 kGy. These materials are suitable for structure materials and thermal control for orbital life less than 7 years. In addition, the transparency of epoxy matrix was degraded. However, there is no color change for either Kevlar fiber or fiberglass. - Highlights: • Space qualification for the reinforced fiber polymeric based materials which will be used for satellite structure. • Change of optical and electrical properties for selected material under the effect of gamma radiation. • Using a simple and low cost manufacturing method for space materials.

Do All Ducks Lay Eggs? The Generic Overgeneralization Effect

Science.gov (United States)

Leslie, Sarah-Jane; Khemlani, Sangeet; Glucksberg, Sam

2011-01-01

Generics are statements such as "tigers are striped" and "ducks lay eggs". They express general, though not universal or exceptionless, claims about kinds (Carlson & Pelletier, 1995). For example, the generic "ducks lay eggs" seems true even though many ducks (e.g. the males) do not lay eggs. The universally quantified version of the statement…

Comparison of two different breeding systems laying hens in relation to egg shell quality, II

Directory of Open Access Journals (Sweden)

Mária Angelovičová

2014-11-01

Full Text Available The aim of work was to follow up and statistically evaluate the selected quality indicators of egg shell according to two different breeding systems and different age of laying hens. An object of investigation were shell weight, share of the shell, strength and thickness of the shell for table eggs. There were used the laying hens of final hybrid ISA Brown reared in enriched cage system, and free range system. In both breeding systems were ensured the conditions with application of the welfare principles. There was used to feed a complete feed mixture HYD 10 in the both breeding systems.  The feeders were supplemented with feed by hand, daily and the same day was supplemented water to drinking troughs. Egg collection was hand in both breeding systems. This paper is a contribution to the solution of optimal breeding laying hens and production of high quality and safe production of table eggs. From the evaluation of the results was formulated conclusion, which shows that statistically significant (p ≤ 0.05 higher egg shell thickness was observed in the breeding free range system compared to the thickness of the egg shell in the breeding cage system, and in age 40 weeks of laying hens in both breeding systems compared to the thickness of the egg shell in age 30 weeks of laying hens. No statistically significant difference (p ≥ 0.05 was observed in egg shell weight between breeding cage system and free range system. Statistically significant (p ≤ 0.05 higher egg shell weight was observed in the age 40 weeks of laying hens in both breeding  systems compared to age 30 weeks of laying hens. There no statistically significant difference (p ≥ 0.05 was observed in the share of egg shell and egg shell strength between breeding cage system and free range system, nor between age 30 and 40 weeks of laying hens.

Opportunities for exercise during pullet rearing, Part II: Long-term effects on bone characteristics of adult laying hens at the end-of-lay.

Science.gov (United States)

Casey-Trott, T M; Korver, D R; Guerin, M T; Sandilands, V; Torrey, S; Widowski, T M

2017-08-01

Osteoporosis in laying hens has been a production and welfare concern for several decades. The objective of this study was to determine whether differing opportunities for exercise during pullet rearing influences long-term bone quality characteristics in end-of-lay hens. A secondary objective was to assess whether differing opportunities for exercise in adult housing systems alters bone quality characteristics in end-of-lay hens. Four flock replicates of 588 Lohmann Selected Leghorn-Lite pullets were reared in either conventional cages (Conv) or an aviary rearing system (Avi) and placed into conventional cages (CC), 30-bird furnished cages (FC-S), or 60-bird furnished cages (FC-L) for adult housing. Wing and leg bones were collected at the end-of-lay to quantify bone composition and strength using quantitative computed tomography and bone breaking strength (BBS). At the end-of-lay, Avi hens had greater total and cortical cross-sectional area (P lay. © The Author 2017. Published by Oxford University Press on behalf of Poultry Science Association.

Methods of Measuring Stress Relaxation in Composite Tape Springs

Science.gov (United States)

2015-03-26

10 3. Cure Cycle Recommended for Patz F7 Prepreg . . . . . . . . . . . . . . . . . . . . . 17 4. Typical Stress...unique and dimensionally complex parts. Hand lay-up is the method by which prepreg tape or fibers are laid down and then the matrix is then ‘painted’ on...structure. Hand lay-up using a prepreg tape stands out as the inexpensive choice for the unique low number production of tape springs and should

High repetition rate tunable femtosecond pulses and broadband amplification from fiber laser pumped parametric amplifier.

Science.gov (United States)

Andersen, T V; Schmidt, O; Bruchmann, C; Limpert, J; Aguergaray, C; Cormier, E; Tünnermann, A

2006-05-29

We report on the generation of high energy femtosecond pulses at 1 MHz repetition rate from a fiber laser pumped optical parametric amplifier (OPA). Nonlinear bandwidth enhancement in fibers provides the intrinsically synchronized signal for the parametric amplifier. We demonstrate large tunability extending from 700 nm to 1500 nm of femtosecond pulses with pulse energies as high as 1.2 muJ when the OPA is seeded by a supercontinuum generated in a photonic crystal fiber. Broadband amplification over more than 85 nm is achieved at a fixed wavelength. Subsequent compression in a prism sequence resulted in 46 fs pulses. With an average power of 0.5 W these pulses have a peak-power above 10 MW. In particular, the average power and pulse energy scalability of both involved concepts, the fiber laser and the parametric amplifier, will enable easy up-scaling to higher powers.

Influence of Interleaved Films on the Mechanical Properties of Carbon Fiber Fabric/Polypropylene Thermoplastic Composites

Directory of Open Access Journals (Sweden)

Jong Won Kim

2016-05-01

Full Text Available A laminated composite was produced using a thermoplastic prepreg by inserting an interleaved film with the same type of matrix as the prepreg during the lay-up process to improve the low interlaminar properties, which is a known weakness of laminated composites. Carbon fiber fabric (CFF and polypropylene (PP were used to manufacture the thermoplastic prepregs. Eight prepregs were used to produce the laminated composites. Interleaved films with different thicknesses were inserted into each prepreg. The physical properties of the composite, such as thickness, density, fiber volume fraction (Vf, and void content (Vc, were examined. The tensile strength, flexural strength, interlaminar shear strength (ILSS, impact property, and scanning electron microscopy (SEM were used to characterize the mechanical properties. Compared to the composite without any inserted interleaved film, as the thickness of the inserted interleaved resin film was increased, Vc decreased by 51.45%. At the same time, however, the tensile strength decreased by 8.75%. Flexural strength increased by 3.79% and flexural modulus decreased by 15.02%. Interlaminar shear strength increased by 11.05% and impact strength increased by 15.38%. Fracture toughness of the laminated composite was improved due to insertion of interleaved film.

Influence of Interleaved Films on the Mechanical Properties of Carbon Fiber Fabric/Polypropylene Thermoplastic Composites.

Science.gov (United States)

Kim, Jong Won; Lee, Joon Seok

2016-05-06

A laminated composite was produced using a thermoplastic prepreg by inserting an interleaved film with the same type of matrix as the prepreg during the lay-up process to improve the low interlaminar properties, which is a known weakness of laminated composites. Carbon fiber fabric (CFF) and polypropylene (PP) were used to manufacture the thermoplastic prepregs. Eight prepregs were used to produce the laminated composites. Interleaved films with different thicknesses were inserted into each prepreg. The physical properties of the composite, such as thickness, density, fiber volume fraction ( V f ), and void content ( V c ), were examined. The tensile strength, flexural strength, interlaminar shear strength (ILSS), impact property, and scanning electron microscopy (SEM) were used to characterize the mechanical properties. Compared to the composite without any inserted interleaved film, as the thickness of the inserted interleaved resin film was increased, V c decreased by 51.45%. At the same time, however, the tensile strength decreased by 8.75%. Flexural strength increased by 3.79% and flexural modulus decreased by 15.02%. Interlaminar shear strength increased by 11.05% and impact strength increased by 15.38%. Fracture toughness of the laminated composite was improved due to insertion of interleaved film.

A R2R3-MYB transcription factor that is specifically expressed in cotton (Gossypium hirsutum) fibers affects secondary cell wall biosynthesis and deposition in transgenic Arabidopsis.

Science.gov (United States)

Sun, Xiang; Gong, Si-Ying; Nie, Xiao-Ying; Li, Yang; Li, Wen; Huang, Geng-Qing; Li, Xue-Bao

2015-07-01

Secondary cell wall (SCW) is an important industrial raw material for pulping, papermaking, construction, lumbering, textiles and potentially for biofuel production. The process of SCW thickening of cotton fibers lays down the cellulose that will constitute the bulk (up to 96%) of the fiber at maturity. In this study, a gene encoding a MYB-domain protein was identified in cotton (Gossypium hirsutum) and designated as GhMYBL1. Quantitative real-time polymerase chain reaction (RT-PCR) analysis revealed that GhMYBL1 was specifically expressed in cotton fibers at the stage of secondary wall deposition. Further analysis indicated that this protein is a R2R3-MYB transcription factor, and is targeted to the cell nucleus. Overexpression of GhMYBL1 in Arabidopsis affected the formation of SCW in the stem xylem of the transgenic plants. The enhanced SCW thickening also occurred in the interfascicular fibers, xylary fibers and vessels of the GhMYBL1-overexpression transgenic plants. The expression of secondary wall-associated genes, such as CesA4, CesA7, CesA8, PAL1, F5H and 4CL1, were upregulated, and consequently, cellulose and lignin biosynthesis were enhanced in the GhMYBL1 transgenic plants. These data suggested that GhMYBL1 may participate in modulating the process of secondary wall biosynthesis and deposition of cotton fibers. © 2014 Scandinavian Plant Physiology Society.

Wireless communications surpassing fiber capacity : micro- and millimeter-wave solutions up to D-band for 5G systems

NARCIS (Netherlands)

Olmos, J. J.Vegas; Monroy, I. Tafur

2017-01-01

In this paper, we present the latest experimental work on millimetre-wave links operating at fiber-like capacity regimes: from UWB communications supporting up to 35 Gbit/s to D-band communications operating at 352 Gbit/s. We provide insights on these technologies and hints on next steps to achieve

Study on the influence of design parameters on the damping property of glass fiber reinforced epoxy composite

Science.gov (United States)

Bhattacharjee, A.; Nanda, B. K.

2018-04-01

Fiber reinforced composites are widely used in industrial applications due to their high strength, light weight and ease in manufacturing. In applications such as automotive, aerospace and structural parts, the components are subjected to unwanted vibrations which reduce their service life, accuracy as well as increases noise. Therefore, it is essential to avoid the detrimental effects of vibrations by enhancing their damping characteristics. The current research deals with estimating the damping properties of Glass fiber reinforced epoxy (GFRE) composites. Processing of the GFRE composites is carried out using hand-lay technique. Various design parameters such as number of glass fiber layers, orientation of fibers and weight ratio are varied while manufacturing GFRE composites. The effects of variation of these design parameters on damping property of GFRE composites are studied extensively.

A smartphone application for dispatch of lay responders to out-of-hospital cardiac arrests.

Science.gov (United States)

Berglund, Ellinor; Claesson, Andreas; Nordberg, Per; Djärv, Therese; Lundgren, Peter; Folke, Fredrik; Forsberg, Sune; Riva, Gabriel; Ringh, Mattias

2018-05-01

Dispatch of lay volunteers trained in cardiopulmonary resuscitation (CPR) and equipped with automated external defibrillators (AEDs) may improve survival in cases of out-of-hospital cardiac arrest (OHCA). The aim of this study was to investigate the functionality and performance of a smartphone application for locating and alerting nearby trained laymen/women in cases of OHCA. A system using a smartphone application activated by Emergency Dispatch Centres was used to locate and alert laymen/women to nearby suspected OHCAs. Lay responders were instructed either to perform CPR or collect a nearby AED. An online survey was carried out among the responders. From February to August 2016, the system was activated in 685 cases of suspected OHCA. Among these, 224 cases were Emergency Medical Services (EMSs)-treated OHCAs (33%). EMS-witnessed cases (n = 11) and cases with missing survey data (n = 15) were excluded. In the remaining 198 OHCAs, lay responders arrived at the scene in 116 cases (58%), and prior to EMSs in 51 cases (26%). An AED was attached in 17 cases (9%) and 4 (2%) were defibrillated. Lay responders performed CPR in 54 cases (27%). Median distance to the OHCA was 560 m (IQR 332-860 m), and 1280 m (IQR 748-1776 m) via AED pick-up. The survey-answering rate was 82%. A smartphone application can be used to alert CPR-trained lay volunteers to OHCAs for CPR. Further improvements are needed to shorten the time to defibrillation before EMS arrival. Copyright © 2018 Elsevier B.V. All rights reserved.

Dynamic interracial/intercultural processes: the role of lay theories of race.

Science.gov (United States)

Hong, Ying-yi; Chao, Melody Manchi; No, Sun

2009-10-01

This paper explores how the lay theory approach provides a framework beyond previous stereotype/prejudice research to understand dynamic personality processes in interracial/ethnic contexts. The authors conceptualize theory of race within the Cognitive-Affective Personality System (CAPS), in which lay people's beliefs regarding the essential nature of race sets up a mind-set through which individuals construe and interpret their social experiences. The research findings illustrate that endorsement of the essentialist theory (i.e., that race reflects deep-seated, inalterable essence and is indicative of traits and ability) versus the social constructionist theory (i.e., that race is socially constructed, malleable, and arbitrary) are associated with different encoding and representation of social information, which in turn affect feelings, motivation, and competence in navigating between racial and cultural boundaries. These findings shed light on dynamic interracial/intercultural processes. Relations of this approach to CAPS are discussed.

LEAP: A randomized-controlled trial of a lay-educator inpatient asthma education program.

Science.gov (United States)

Rice, Jessica L; Matlack, Kristen M; Simmons, Marsha D; Steinfeld, Jonathan; Laws, Margaret A; Dovey, Mark E; Cohen, Robyn T

2015-06-29

To evaluate the impact of LEAP, a volunteer-based, inpatient asthma education program for families of inner-city children with asthma. 711 children ages 2-17 years admitted with status asthmaticus were randomized to receive usual care or usual care plus a supplemental education intervention. Both groups completed a baseline interview. Trained volunteer lay educators conducted individualized bedside education with the intervention group. Primary outcome was attendance at a post-hospitalization follow-up visit 7-10 days after discharge. Secondary outcomes included parent-reported asthma management behaviors, symptoms, and self-efficacy scores from a one month follow-up interview. Post-hospitalization asthma clinic attendance was poor (38%), with no difference between groups. Families randomized to the intervention group were more likely to report use of a controller (OR 2.4, 95% CI 1.3-4.2, peducation by trained lay volunteers was associated with improved asthma management behaviors. This novel volunteer-based program could have widespread implications as a sustainable model for asthma education. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

FLAIR MR sequence in the diagnosis and follow-up of low-grade astrocytomas

Directory of Open Access Journals (Sweden)

Stošić-Opinćal Tatjana

2005-01-01

Full Text Available Aim. To evaluate the sensitivity of fluid-attenuated inversion recovery (FLAIR sequence in the diagnosis and follow-up of the patients with low-grade astrocytomas compared with T2-weighted (T2W sequence. Methods. Twenty-four patients with biopsy- confirmed low-grade astrocytoma (age range, 15-66 years underwent T1- weighted (T1W, T2W and FLAIR imaging with a superconducting unit 1.0 T. FLAIR images were qualitatively evaluated by comparison with T2W images by the three experienced neuroradiologists. To evaluate the diagnostic value of FLAIR, the neuroradiologists individually assessed the possibilities of the detection of lesions, as well as the possibilities of the differentiation of tumor from the surrounding edema on FLAIR vs. T2W images. Every examiner ranked FLAIR sequence vs. T2W in three degrees: worse, equal and better. Results. The comparison of FLAIR with T2W spin-echo (SE images with regard to the detection of the lesions showed that 82.8% of FLAIR studies were superior, 17.2% were of similar diagnostic value, and none was inferior to the T2W images. The comparison of images with regard to the differentiation of tumor boundaries vs. surrounding edema showed that 92.5% of FLAIR studies were superior, 7.5% were of similar diagnostic value, and none was inferior to the T2W images. Conclusion. Our results were similar to the previous studies' results concerning the advantages of FLAIR sequence in the diagnosis of low grade astrocytomas over T2W sequence. FLAIR was better at showing different tumor components, and at distinguishing CSF from the cystic component, and the postoperative cavity, compared with T2W images. Our conclusion was that FLAIR could be routinely used in the evaluation and follow-up of low-grade astrocytomas.

Dose-response feeding study of short chain chlorinated paraffins (SCCPs) in laying hens: effects on laying performance and tissue distribution, accumulation and elimination kinetics.

Science.gov (United States)

Ueberschär, Karl-Heinz; Dänicke, Sven; Matthes, Siegfried

2007-02-01

Technical short chain chlorinated paraffins (C10-C13 with 60% chlorine) were fed to 93 laying hens from 24 to 32 weeks of age in increasing concentrations of up to 100 mg/kg feed. No significant influence on health, relative organ weights or performance (laying intensity, egg weight, feed consumption) was noted. The chlorinated paraffin content of the tissues was linearly related to the concentration of short chain paraffins of the feed. The highest concentrations were found in abdominal fat, egg yolk and fatty tissues. Breast muscle, egg albumen and bile fluid contained minimal or no residues. Less than 1% of the chlorinated paraffins ingested were incorporated into the body (without head, feet, gut and feathers), whereas about 1.5% were eliminated with the egg yolk and 30% were excreted with urine and faeces. A six-week kinetic depuration study revealed a biphasic elimination with half-lifes of 4-40 min (liver, kidneys, legs, fat, blood) for the initial rapid phase, and 15-30 days (blood, fat, liver, yolk, kidneys, legs) for the terminal slow phase.

Existing PON Infrastructure Supported Hybrid Fiber-Wireless Sensor Networks

DEFF Research Database (Denmark)

Yu, Xianbin; Zhao, Ying; Deng, Lei

2012-01-01

We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals.......We propose a hybrid fiber wireless sensor network based on the existing PON infrastructure. The feasibility of remote sensing and PON convergence is experimentally proven by transmitting direct-sequence spread-spectrum wireless sensing and 2.5Gbps GPON signals....

Automation of Underground Cable Laying Equipment Using PLC and Hmi

Science.gov (United States)

Mal Kothari, Kesar; Samba, Vishweshwar; Tania, Kinza; Udayakumar, R., Dr; Karthikeyan, Ram, Dr

2018-04-01

Underground cable laying is an alternative for overhead cable laying of telecommunication and power transmission lines. It is becoming very popular in recent times because of some of its advantages over overhead cable laying. This type of cable laying is mostly practiced in developed countries because it is more expensive than overhead cable laying. Underground cable laying is more suitable when land is not available, and it also increases the aesthetics. This paper implements the automation on a manually operated cable pulling winch machine using programmable logic controller (PLC). Winch machines are useful in underground cable laying. The main aim of the project is to replace all the mechanical functions with electrical controls which are operated through a touch screen (HMI). The idea is that the machine should shift between parallel and series circuit automatically based on the pressure sensed instead of manually operating the solenoid valve. Traditional means of throttling the engine using lever and wire is replaced with a linear actuator. Sensors such as proximity, pressure and load sensor are used to provide the input to the system. The HMI used will display the speed, length and tension of the rope being winded. Ladder logic is used to program the PLC.

Caenorhabditis elegans Egg-Laying Detection and Behavior Study Using Image Analysis

Directory of Open Access Journals (Sweden)

Palm Megan

2005-01-01

Full Text Available Egg laying is an important phase of the life cycle of the nematode Caenorhabditis elegans (C. elegans. Previous studies examined egg-laying events manually. This paper presents a method for automatic detection of egg-laying onset using deformable template matching and other morphological image analysis techniques. Some behavioral changes surrounding egg-laying events are also studied. The results demonstrate that the computer vision tools and the algorithm developed here can be effectively used to study C. elegans egg-laying behaviors. The algorithm developed is an essential part of a machine-vision system for C. elegans tracking and behavioral analysis.

Effect of Fiber Volume Fraction and Water Absorption toward Bending Strength of Coconut Filters/ Polyester Composite

Directory of Open Access Journals (Sweden)

I Putu Lokantara

2012-11-01

Full Text Available The variation of fibre volume and the duration of water soaking take influence on the mechanical properties of composite. This research aim is to know the influence of fraction volume fibre and soaking duration on the mineral watertoward the tensile strength and flexural of polyester-coconut-tapis composite. This research used coconut-tapis fibre which is cut 1 cm in length with 0%, 5%, 7,5%, and 10% fiber volume fraction, unsaturated-polyester (UPRs matrix resin type Yucalac 157 BQTN-EX, and MEKPO hardener. The flexure specimen are made by press hand lay-up method and cut according ASTM D790-03 for the flexure test. The result of flexure test shows that the duration of soaking and the fiber volume fraction give a significant effect on the flexural strength of composite. The highest strength are reached by composite with 10% fibre volume on 48 hour soaking time equal to 41.994 MPa. The flexure modulus happenend shows increasing until 24 hour soaking time. The highest modulus are reached by composite with 10% fibre volume equal to 7.114 GPa while the lowest are reached by composite with 0% fibre volume equal to 3,023 GPa.

Early Onset of Laying and Bumblefoot Favor Keel Bone Fractures

Science.gov (United States)

Gebhardt-Henrich, Sabine G.; Fröhlich, Ernst K. F.

2015-01-01

Simple Summary Numerous studies have documented a high prevalence of keel bone fractures in laying hens. In this longitudinal study, 80 white and brown laying hens were regularly checked for keel bone deviations and fractures while egg production was individually monitored. About 62% of the hens had broken keel bones at depopulation. More new fractures occurred during the time when laying rates were highest. Hens with broken keel bones at depopulation had laid their first egg earlier than hens with intact keel bones. All birds with bumblefoot on both feet had a fracture at depopulation. Abstract Numerous studies have demonstrated influences of hybrid, feed, and housing on prevalence of keel bone fractures, but influences of behavior and production on an individual level are less known. In this longitudinal study, 80 white and brown laying hens were regularly checked for keel bone deviations and fractures while egg production was individually monitored using Radio Frequency Identification (RFID) from production until depopulation at 65 weeks of age. These focal birds were kept in eight pens with 20 hens per pen in total. About 62% of the hens had broken keel bones at depopulation. The occurrence of new fractures was temporally linked to egg laying: more new fractures occurred during the time when laying rates were highest. Hens with fractured keel bones at depopulation had laid their first egg earlier than hens with intact keel bones. However, the total number of eggs was neither correlated with the onset of egg laying nor with keel bone fractures. All birds with bumblefoot on both feet had a fracture at depopulation. Hens stayed in the nest for a longer time during egg laying during the ten days after the fracture than during the ten days before the fracture. In conclusion, a relationship between laying rates and keel bone fractures seems likely. PMID:26633520

Enhanced radiation resistant fiber optics

Science.gov (United States)

Lyons, P.B.; Looney, L.D.

1993-11-30

A process for producing an optical fiber having enhanced radiation resistance is provided, the process including maintaining an optical fiber within a hydrogen-containing atmosphere for sufficient time to yield a hydrogen-permeated optical fiber having an elevated internal hydrogen concentration, and irradiating the hydrogen-permeated optical fiber at a time while the optical fiber has an elevated internal hydrogen concentration with a source of ionizing radiation. The radiation source is typically a cobalt-60 source and the fiber is pre-irradiated with a dose level up to about 1000 kilorads of radiation. 4 figures.

Enhanced radiation resistant fiber optics

International Nuclear Information System (INIS)

Lyons, P.B.; Looney, L.D.

1993-01-01

A process for producing an optical fiber having enhanced radiation resistance is provided, the process including maintaining an optical fiber within a hydrogen-containing atmosphere for sufficient time to yield a hydrogen-permeated optical fiber having an elevated internal hydrogen concentration, and irradiating the hydrogen-permeated optical fiber at a time while the optical fiber has an elevated internal hydrogen concentration with a source of ionizing radiation. The radiation source is typically a cobalt-60 source and the fiber is pre-irradiated with a dose level up to about 1000 kilorads of radiation. 4 figures

SBIR-Long fluoride fiber

Science.gov (United States)

Jaeger, Raymond E.; Vacha, Lubos J.

1987-08-01

This report summarizes results obtained under a program aimed at developing new techniques for fabricating long lengths of heavy metal fluoride glass (HMFG) optical fiber. A new method for overcladding conventional HMFG preforms with a low melting oxide glass was developed, and improvements in the rotational casting method were made to increase preform length. The resulting composite glass canes consist of a fluoride glass overcoat layer to enhance strength and chemical durability. To show feasibility, prototype optical fiber preforms up to 1.6 cm in diameter with lengths of 22 cm were fabricated. These were drawn into optical fibers with lengths up to 900 meters.

Bottom-up driven involuntary auditory evoked field change: constant sound sequencing amplifies but does not sharpen neural activity.

Science.gov (United States)

Okamoto, Hidehiko; Stracke, Henning; Lagemann, Lothar; Pantev, Christo

2010-01-01

The capability of involuntarily tracking certain sound signals during the simultaneous presence of noise is essential in human daily life. Previous studies have demonstrated that top-down auditory focused attention can enhance excitatory and inhibitory neural activity, resulting in sharpening of frequency tuning of auditory neurons. In the present study, we investigated bottom-up driven involuntary neural processing of sound signals in noisy environments by means of magnetoencephalography. We contrasted two sound signal sequencing conditions: "constant sequencing" versus "random sequencing." Based on a pool of 16 different frequencies, either identical (constant sequencing) or pseudorandomly chosen (random sequencing) test frequencies were presented blockwise together with band-eliminated noises to nonattending subjects. The results demonstrated that the auditory evoked fields elicited in the constant sequencing condition were significantly enhanced compared with the random sequencing condition. However, the enhancement was not significantly different between different band-eliminated noise conditions. Thus the present study confirms that by constant sound signal sequencing under nonattentive listening the neural activity in human auditory cortex can be enhanced, but not sharpened. Our results indicate that bottom-up driven involuntary neural processing may mainly amplify excitatory neural networks, but may not effectively enhance inhibitory neural circuits.

An Analysis of the Lay Participation To Vocation Promotion in Vietnam

Directory of Open Access Journals (Sweden)

Thuy Thi Bich Pham

2017-05-01

Full Text Available From the dawn of Vatican Council II, lay Catholics have been encouraged to actively participate to the life and mission of the Church. Many lay faithful have responded to this call and dispensed their service in various church ministries. However, many other lay men and wo men have not demonstrated a visible participation, especially in the mission of promoting priestly and religious vocations. In its attempt to advocate for a more active collaboration of Vietnamese lay people in vocation promotion, this paper will accomplis h three goals. It will stress once again that lay Christians in Vietnam need to share the responsibility entrusted to each by the Church in encouraging vocations. The paper then argues that lay presence in this ministry enhances its dynamic and effectivene ss. It finally explores ways lay faithful can employ to raise awareness in youth of the call to priesthood and religious life in their context and culture. As such, the study hopes to inspire all baptized to extend their participatory presence in vocation promotion with zeal and confidence.

Functional analysis of the accessory protein TapA in Bacillus subtilis amyloid fiber assembly.

Science.gov (United States)

Romero, Diego; Vlamakis, Hera; Losick, Richard; Kolter, Roberto

2014-04-01

Bacillus subtilis biofilm formation relies on the assembly of a fibrous scaffold formed by the protein TasA. TasA polymerizes into highly stable fibers with biochemical and morphological features of functional amyloids. Previously, we showed that assembly of TasA fibers requires the auxiliary protein TapA. In this study, we investigated the roles of TapA sequences from the C-terminal and N-terminal ends and TapA cysteine residues in its ability to promote the assembly of TasA amyloid-like fibers. We found that the cysteine residues are not essential for the formation of TasA fibers, as their replacement by alanine residues resulted in only minor defects in biofilm formation. Mutating sequences in the C-terminal half had no effect on biofilm formation. However, we identified a sequence of 8 amino acids in the N terminus that is key for TasA fiber formation. Strains expressing TapA lacking these 8 residues were completely defective in biofilm formation. In addition, this TapA mutant protein exhibited a dominant negative effect on TasA fiber formation. Even in the presence of wild-type TapA, the mutant protein inhibited fiber assembly in vitro and delayed biofilm formation in vivo. We propose that this 8-residue sequence is crucial for the formation of amyloid-like fibers on the cell surface, perhaps by mediating the interaction between TapA or TapA and TasA molecules.

Structure and properties of tempo-oxidized cotton fibers

Directory of Open Access Journals (Sweden)

Milanovic Jovana

2012-01-01

Full Text Available In this paper, the influence of the catalytic oxidation using water soluble and stable nitroxyl radical 2,2´,6,6´-tetramethylpiperidine-1-oxyl (TEMPO on structure and properties of cotton fibers was studied. In particular, the selective TEMPO-mediated oxidation has become very interesting way for introduction of functional groups into cellulose fibers with the aim to obtain oxycellulose fibers with specific properties. Unmodified and modified fibers were characterized in terms of weight loss values, introduced functional groups and crystallinity index. Also, oxidized fibers were characterized in terms of the sorption, morphological, and physico-mechanical properties. The TEMPO-oxidized cotton fibers show a minimum increase of fineness (from 1.32 to 1.28 dtex and increase of crystallinity index (up to 91.9%, while the tensile strength of fibers decreases (up to 10.82 cN/tex. By the TEMPO-mediated oxidation of cotton fibers significant amount of carboxyl groups (up to 0.795 mmol/g cell can be introduced into cellulose fibers. Introduced hydrophilic carboxyl groups increases the sorption properties of oxidized fibers, that can be used directly or for further chemical modification.

Transcriptome profiling using pyrosequencing shows genes associated with bast fiber development in ramie (Boehmeria nivea L.).

Science.gov (United States)

Chen, Jie; Pei, Zhihua; Dai, Lunjin; Wang, Bo; Liu, Lijun; An, Xia; Peng, Dingxiang

2014-10-22

Ramie (Boehmeria nivea L.), popularly known as "China grass", is one of the oldest crops in China and the second most important fiber crop in terms of area sown. Ramie fiber, extracted from the plant bast, is important in the textile industry. However, the molecular mechanism of ramie fiber development remains unknown. A whole sequencing run was performed on the 454 GS FLX + platform using four separately pooled parts of ramie bast. This generated 1,030,057 reads with an average length of 457 bp. Among the 58,369 unigenes (13,386 contigs and 44,983 isotigs) that were generated through de novo assembly, 780 were differentially expressed. As a result, 13 genes that belong to the cellulose synthase gene family (four), the expansin gene family (three) and the xyloglucan endotransglucosylase/hydrolase (XTH) gene family (six) were up-regulated in the top part of the bast, which was in contrast to the other three parts. The identification of these 13 concurrently up-regulated unigenes indicated that the early stage (represented by the top part of the bast) might be important for the molecular regulation of ramie fiber development. Further analysis indicated that four of the 13 unigenes from the expansin (two) and XTH (two) families shared a coincident expression pattern during the whole growth season, which implied they were more relevant to ramie fiber development (fiber quality, etc.) during the different seasons than the other genes. To the best of our knowledge, this study is the first to characterize ramie fiber development at different developmental stages. The identified transcripts will improve our understanding of the molecular mechanisms involved in ramie fiber development. Moreover, the identified differentially expressed genes will accelerate molecular research on ramie fiber growth and the breeding of ramie with better fiber yields and quality.

Top-Down-Assisted Bottom-Up Method for Homologous Protein Sequencing: Hemoglobin from 33 Bird Species

Science.gov (United States)

Song, Yang; Laskay, Ünige A.; Vilcins, Inger-Marie E.; Barbour, Alan G.; Wysocki, Vicki H.

2015-11-01

Ticks are vectors for disease transmission because they are indiscriminant in their feeding on multiple vertebrate hosts, transmitting pathogens between their hosts. Identifying the hosts on which ticks have fed is important for disease prevention and intervention. We have previously shown that hemoglobin (Hb) remnants from a host on which a tick fed can be used to reveal the host's identity. For the present research, blood was collected from 33 bird species that are common in the U.S. as hosts for ticks but that have unknown Hb sequences. A top-down-assisted bottom-up mass spectrometry approach with a customized searching database, based on variability in known bird hemoglobin sequences, has been devised to facilitate fast and complete sequencing of hemoglobin from birds with unknown sequences. These hemoglobin sequences will be added to a hemoglobin database and used for tick host identification. The general approach has the potential to sequence any set of homologous proteins completely in a rapid manner.

Photonic crystal fibers for supercontinuum generation pumped by a gain-switched CW fiber laser

DEFF Research Database (Denmark)

Larsen, Casper; Noordegraaf, Danny; Hansen, Kim P.

2012-01-01

Supercontinuum generation in photonics crystal fibers (PCFs) pumped by CW lasers yields high spectral power density and average power. However, such systems require very high pump power and long nonlinear fibers. By on/off modulating the pump diodes of the fiber laser, the relaxation oscillations...... of the laser can be exploited to enhance the broadening process. The physics behind the supercontinuum generation is investigated by sweeping the fiber length, the zero dispersion wavelength, and the fiber nonlinearity. We show that by applying gain-switching a high average output power of up to 30 W can...

Radiation response of SiC-based fibers

Energy Technology Data Exchange (ETDEWEB)

Youngblood, G.E.; Jones, R.H. [Battelle Pacific Northwest Labs., Richland, WA (United States); Kohyama, A. [Inst. of Advanced Energy, Kyoto Univ. (Japan); Snead, L.L. [Oak Ridge National Lab., TN (United States)

1998-10-01

Loss of strength in irradiated fiber-reinforced SiC/SiC composite generally is related to degradation in the reinforcing fiber. To assess fiber degradation, the density and length changes were determined for four types of SiC-based fibers (Tyranno, Nicalon CG, Hi Nicalon and Dow X) after high temperature (up to 1000 C) and high dose (up to 80 dpa-SiC) irradiations. For the fibers with nonstoichiometric compositions (the first three types in the list), the fiber densities increased from 6% to 12%. In contrast, a slight decrease in density (<1%) was observed for the Dow X fiber with a quasi-stoichiometric composition. Fiber length changes (0-5.6% shrinkage) suggested small mass losses (1-6%) had occurred for irradiated uncoated fibers. In contrast, excessive linear shrinkage of the pyrocarbon-coated Nicalon CG and Tyranno fibers (7-9% and 16-32%, respectively) indicated that much larger mass losses (11-84%) had occurred for these coated fibers. Crystallization and crystal growth were observed to have taken place at fiber surfaces by SEM and in the bulk by XRD, moreso for irradiated Nicalon CG than for Hi Nicalon fiber. The radiation response of the quasi-stoichiometric Dow X fiber was the most promising. Further testing of this type fiber is recommended. (orig.) 11 refs.

Tidying up international nucleotide sequence databases: ecological, geographical and sequence quality annotation of its sequences of mycorrhizal fungi.

Science.gov (United States)

Tedersoo, Leho; Abarenkov, Kessy; Nilsson, R Henrik; Schüssler, Arthur; Grelet, Gwen-Aëlle; Kohout, Petr; Oja, Jane; Bonito, Gregory M; Veldre, Vilmar; Jairus, Teele; Ryberg, Martin; Larsson, Karl-Henrik; Kõljalg, Urmas

2011-01-01

Sequence analysis of the ribosomal RNA operon, particularly the internal transcribed spacer (ITS) region, provides a powerful tool for identification of mycorrhizal fungi. The sequence data deposited in the International Nucleotide Sequence Databases (INSD) are, however, unfiltered for quality and are often poorly annotated with metadata. To detect chimeric and low-quality sequences and assign the ectomycorrhizal fungi to phylogenetic lineages, fungal ITS sequences were downloaded from INSD, aligned within family-level groups, and examined through phylogenetic analyses and BLAST searches. By combining the fungal sequence database UNITE and the annotation and search tool PlutoF, we also added metadata from the literature to these accessions. Altogether 35,632 sequences belonged to mycorrhizal fungi or originated from ericoid and orchid mycorrhizal roots. Of these sequences, 677 were considered chimeric and 2,174 of low read quality. Information detailing country of collection, geographical coordinates, interacting taxon and isolation source were supplemented to cover 78.0%, 33.0%, 41.7% and 96.4% of the sequences, respectively. These annotated sequences are publicly available via UNITE (http://unite.ut.ee/) for downstream biogeographic, ecological and taxonomic analyses. In European Nucleotide Archive (ENA; http://www.ebi.ac.uk/ena/), the annotated sequences have a special link-out to UNITE. We intend to expand the data annotation to additional genes and all taxonomic groups and functional guilds of fungi.

Embedding of MEMS pressure and temperature sensors in carbon fiber composites: a manufacturing approach

Science.gov (United States)

Javidinejad, Amir; Joshi, Shiv P.

2000-06-01

In this paper embedding of surface mount pressure and temperature sensors in the Carbon fiber composites are described. A commercially available surface mount pressure and temperature sensor are used for embedding in a composite lay- up of IM6/HST-7, IM6/3501 and AS4/E7T1-2 prepregs. The fabrication techniques developed here are the focus of this paper and provide for a successful embedding procedure of pressure sensors in fibrous composites. The techniques for positioning and insulating, the sensor and the lead wires, from the conductive carbon prepregs are described and illustrated. Procedural techniques are developed and discussed for isolating the sensor's flow-opening, from the exposure to the prepreg epoxy flow and exposure to the fibrous particles, during the autoclave curing of the composite laminate. The effects of the autoclave cycle (if any) on the operation of the embedded pressure sensor are discussed.

Random fiber laser based on artificially controlled backscattering fibers.

Science.gov (United States)

Wang, Xiaoliang; Chen, Daru; Li, Haitao; She, Lijuan; Wu, Qiong

2018-01-10

The random fiber laser (RFL), which is a milestone in laser physics and nonlinear optics, has attracted considerable attention recently. Most previously reported RFLs are based on distributed feedback of Rayleigh scattering amplified through the stimulated Raman-Brillouin scattering effect in single-mode fibers, which require long-distance (tens of kilometers) single-mode fibers and high threshold, up to watt level, due to the extremely small Rayleigh scattering coefficient of the fiber. We proposed and demonstrated a half-open-cavity RFL based on a segment of an artificially controlled backscattering single-mode fiber with a length of 210 m, 310 m, or 390 m. A fiber Bragg grating with a central wavelength of 1530 nm and a segment of artificially controlled backscattering single-mode fiber fabricated by using a femtosecond laser form the half-open cavity. The proposed RFL achieves thresholds of 25 mW, 30 mW, and 30 mW, respectively. Random lasing at a wavelength of 1530 nm and extinction ratio of 50 dB is achieved when a segment of 5 m erbium-doped fiber is pumped by a 980 nm laser diode in the RFL. A novel RFL with many short cavities has been achieved with low threshold.

The effect of composition feed mixtures on curve of hens laying intensity

Directory of Open Access Journals (Sweden)

Emil Mareček

2005-01-01

Full Text Available The experiment was done in the experimental station ÚKZÚZ Havlíčkův Brod. There were four experimental groups (N1, N2, N3, N4 of laying hens and weekly laying intensity was observed. Hybrid ISA BROWN was used in the experiment, 405 hens in each group. The laying intensity was observed from the start of laying for 44 weeks. During laying four different diets were fed to laying hens (N1 – control group with fish meal, N2 – control group containing only of plant protein sources, N3 – experimental group with higher content of rapeseed, N4 – experimental group containing treated rapeseed. Yang model was used for the evaluation of laying curves and we found following parameters of the curves:Yang model N1: y = 97.28 * e – 0.004 * t / [1 + e – 2.054 (t – 2.549]\tR2 = 0.97Yang model N2: y = 98.29 * e – 0.006 * t / [1 + e – 2.071 (t – 2.668]\tR2 = 0.96Yang model N3: y = 98.49 * e – 0.005 * t / [1 + e – 1.856 (t – 2.568]\tR2 = 0.97Yang model N4: y = 98.55 * e – 0.005 * t / [1 + e – 2.251 (t – 2.615].\tR2 = 0.97The results document that experimental treatments had small effect on the parameters of laying curves. It means that rapeseed had only small effect on the laying intensity and also the elimination of animal protein from the diet for laying hens had not effect on laying intensity. On the base of our results we estimated the standard equation for evaluation of laying curve:Yang model: y = 98.15 * e – 0.005 * t / [1 + e – 2.058 (t – 2.601].\tR2 = 0.99This equation can be used as standard for evaluation of laying intensity after experimental treatments or for evaluation of laying intensity of different hybrids.

Comparison of OOK- and PAM-4 modulation for 10 Gbit/s transmission over up to 300 m polymer optical fiber

NARCIS (Netherlands)

Breyer, F.; Lee, S.C.J.; Randel, S.; Hanik, N.

2008-01-01

10 Gbit/s Transmission over up to 300 m of multimode 62.5 µm core-diameter perfluorinated graded-index polymer optical fiber is compared using on-off-keying (OOK) or 4-level pulse amplitude modulation (PAM-4) and feed-forward or decision-feedback equalization.

Reporting of Randomized Trials in Common Cancers in the Lay Media.

Science.gov (United States)

Ribnikar, Domen; Goldvaser, Hadar; Ocana, Alberto; Templeton, Arnoud J; Seruga, Bostjan; Amir, Eitan

2018-01-01

Limited data exist about the role of the lay media in the dissemination of results of randomized controlled trials (RCTs) in common cancers. Completed phase III RCTs evaluating new drugs in common cancers between January 2005 and October 2016 were identified from ClinicalTrials.gov. Lay media reporting was identified by searching LexisNexis Academic. Scientific reporting was defined as presentation at an academic conference or publication in full. Associations between reporting in the lay media before scientific reporting and study design and sponsorship were evaluated using logistic regression. Of 180 RCTs identified, 52% were reported in the lay media and in 27%, lay media reporting occurred before scientific reporting with an increasing trend over time (p = 0.009). Reporting in the lay media before scientific reporting was associated with positive results (OR: 2.10, p = 0.04), targeted therapy compared to chemotherapy (OR: 4.75, p = 0.006), immunotherapy compared to chemotherapy (OR: 7.60, p = 0.02), and prostate cancer compared to breast cancer (OR: 3.25, p = 0.02). Over a quarter of all RCTs in common cancers are reported in the lay media before they are reported scientifically with an increasing proportion over time. Positive trials, studies in prostate cancer, and trials of immunotherapy are associated with early reporting in the lay media. © 2017 S. Karger AG, Basel.

Hybrid CATV/MMW/BB lightwave transmission system based on fiber-wired/fiber-wireless/fiber-VLLC integrations.

Science.gov (United States)

Li, Chung-Yi; Lu, Hai-Han; Lu, Ting-Chieh; Chu, Chien-An; Chen, Bo-Rui; Lin, Chun-Yu; Peng, Peng-Chun

2015-12-14

A hybrid lightwave transmission system for cable television (CATV)/millimeter-wave (MMW)/baseband (BB) signal transmission based on fiber-wired/fiber-wireless/fiber-visible laser light communication (VLLC) integrations is proposed and demonstrated. For down-link transmission, the light is intensity-modulated with 50-550 MHz CATV signal and optically promoted from 25 GHz radio frequency (RF) signal to 10 Gbps/50 GHz and 20 Gbps/100 GHz MMW data signals based on fiber-wired and fiber-wireless integrations. Good performances of carrier-to-noise ratio (CNR), composite second-order (CSO), composite triple-beat (CTB), and bit error rate (BER) are obtained over a 40-km single-mode fiber (SMF) and a 10-m RF wireless transport. For up-link transmission, the light is successfully intensity-remodulated with 5-Gbps BB data stream based on fiber-VLLC integration. Good BER performance is achieved over a 40-km SMF and a 10-m free-space VLLC transport. Such a hybrid CATV/MMW/BB lightwave transmission system is an attractive alternative, it gives the benefits of a communication link for broader bandwidth and higher transmission rate.

Comparison of two fiber-optical temperature measurement systems in magnetic fields up to 9.4 Tesla.

Science.gov (United States)

Buchenberg, Waltraud B; Dadakova, Tetiana; Groebner, Jens; Bock, Michael; Jung, Bernd

2015-05-01

Precise temperature measurements in the magnetic field are indispensable for MR safety studies and for temperature calibration during MR-guided thermotherapy. In this work, the interference of two commonly used fiber-optical temperature measurement systems with the static magnetic field B0 was determined. Two fiber-optical temperature measurement systems, a GaAs-semiconductor and a phosphorescent phosphor ceramic, were compared for temperature measurements in B0 . The probes and a glass thermometer for reference were placed in an MR-compatible tube phantom within a water bath. Temperature measurements were carried out at three different MR systems covering static magnetic fields up to B0  = 9.4T, and water temperatures were changed between 25°C and 65°C. The GaAs-probe significantly underestimated absolute temperatures by an amount related to the square of B0 . A maximum difference of ΔT = -4.6°C was seen at 9.4T. No systematic temperature difference was found with the phosphor ceramic probe. For both systems, the measurements were not dependent on the orientation of the sensor to B0 . Temperature measurements with the phosphor ceramic probe are immune to magnetic fields up to 9.4T, whereas the GaAs-probes either require a recalibration inside the MR system or a correction based on the square of B0. © 2014 Wiley Periodicals, Inc.

Pharmaceutical policy and the lay public

DEFF Research Database (Denmark)

Traulsen, Janine Marie; Almarsdóttir, Anna Birna

2005-01-01

Almost every national and supranational health policy document accords high importance to the need to listen to and 'empower' patients. The relationship between pharmaceutical policy and the lay public is not direct but mediated by several actors, including health care workers, patient organisati......Almost every national and supranational health policy document accords high importance to the need to listen to and 'empower' patients. The relationship between pharmaceutical policy and the lay public is not direct but mediated by several actors, including health care workers, patient...... organisations, industry and, most recently, the media. Although the overall aim of health and pharmaceutical policy is to address the needs of all citizens, there are only a few, well organised groups who are actually consulted and involved in the policymaking process, often with the support of the industry....... The reasons for this lack of citizen involvement in health and pharmaceutical policymaking are many, for example: there is no consensus about what public involvement means; there is a predominance of special interest groups with narrow, specific agendas; not all decision makers welcome lay participation...

Laying the foundations of a culture of health as a pedagogical problem

Directory of Open Access Journals (Sweden)

A.P. Khalajtsan

2014-08-01

Full Text Available Purpose : to show the dominant influence of educational - educational process lay the groundwork for a culture of health students. Material : processed more than 40 references, conducted a survey, questionnaires and observation of the living conditions of students. Results : named main reasons for creating a culture of health of students should be considered as primary pedagogical problem. The preconditions and conditions of the foundations of the culture of youth health, namely: social, educational, health, environmental, economic, geographic, individual. Traced the sequence and phasing of the pedagogical process of building a culture of health of students in the course of many years of teaching in higher education. Conclusions : proven pedagogical influence priority basis forming a culture of health of students in the individual development and identity formation for learning in higher education. The sequence and structure of the solution of pedagogical problems of forming the foundations of a culture of health students.

Interface stresses in fiber-reinforced materials with regular fiber arrangements

Science.gov (United States)

Mueller, W. H.; Schmauder, S.

The theory of linear elasticity is used here to analyze the stresses inside and at the surface of fiber-reinforced composites. Plane strain, plane stress, and generalized plane strain are analyzed using the shell model and the BHE model and are numerically studied using finite element analysis. Interface stresses are shown to depend weakly on Poisson's ratio. For equal values of the ratio, generalized plane strain and plane strain results are identical. For small volume fractions up to 40 vol pct of fibers, the shell and the BHE models predict the interface stresses very well over a wide range of elastic mismatches and for different fiber arrangements. At higher volume fractions the stresses are influenced by interactions with neighboring fibers. Introducing an external pressure into the shell model allows the prediction of interface stresses in real composite with isolated or regularly arranged fibers.

Femtosecond laser inscription of asymmetric directional couplers for in-fiber optical taps and fiber cladding photonics.

Science.gov (United States)

Grenier, Jason R; Fernandes, Luís A; Herman, Peter R

2015-06-29

Precise alignment of femtosecond laser tracks in standard single mode optical fiber is shown to enable controllable optical tapping of the fiber core waveguide light with fiber cladding photonic circuits. Asymmetric directional couplers are presented with tunable coupling ratios up to 62% and bandwidths up to 300 nm at telecommunication wavelengths. Real-time fiber monitoring during laser writing permitted a means of controlling the coupler length to compensate for micron-scale alignment errors and to facilitate tailored design of coupling ratio, spectral bandwidth and polarization properties. Laser induced waveguide birefringence was harnessed for polarization dependent coupling that led to the formation of in-fiber polarization-selective taps with 32 dB extinction ratio. This technology enables the interconnection of light propagating in pre-existing waveguides with laser-formed devices, thereby opening a new practical direction for the three-dimensional integration of optical devices in the cladding of optical fibers and planar lightwave circuits.

Fiber-Optic Chemical Sensors and Fiber-Optic Bio-Sensors

Science.gov (United States)

Pospíšilová, Marie; Kuncová, Gabriela; Trögl, Josef

2015-01-01

This review summarizes principles and current stage of development of fiber-optic chemical sensors (FOCS) and biosensors (FOBS). Fiber optic sensor (FOS) systems use the ability of optical fibers (OF) to guide the light in the spectral range from ultraviolet (UV) (180 nm) up to middle infrared (IR) (10 µm) and modulation of guided light by the parameters of the surrounding environment of the OF core. The introduction of OF in the sensor systems has brought advantages such as measurement in flammable and explosive environments, immunity to electrical noises, miniaturization, geometrical flexibility, measurement of small sample volumes, remote sensing in inaccessible sites or harsh environments and multi-sensing. The review comprises briefly the theory of OF elaborated for sensors, techniques of fabrications and analytical results reached with fiber-optic chemical and biological sensors. PMID:26437407

Fiber-Optic Chemical Sensors and Fiber-Optic Bio-Sensors.

Science.gov (United States)

Pospíšilová, Marie; Kuncová, Gabriela; Trögl, Josef

2015-09-30

This review summarizes principles and current stage of development of fiber-optic chemical sensors (FOCS) and biosensors (FOBS). Fiber optic sensor (FOS) systems use the ability of optical fibers (OF) to guide the light in the spectral range from ultraviolet (UV) (180 nm) up to middle infrared (IR) (10 μm) and modulation of guided light by the parameters of the surrounding environment of the OF core. The introduction of OF in the sensor systems has brought advantages such as measurement in flammable and explosive environments, immunity to electrical noises, miniaturization, geometrical flexibility, measurement of small sample volumes, remote sensing in inaccessible sites or harsh environments and multi-sensing. The review comprises briefly the theory of OF elaborated for sensors, techniques of fabrications and analytical results reached with fiber-optic chemical and biological sensors.

Medullary bone and humeral breaking strength in laying hens

International Nuclear Information System (INIS)

Fleming, R.H.; McCormack, H.A.; McTeir, L.; Whitehead, C.C.

1998-01-01

To test the hypothesis that large amounts of medullary bone in the humeral diaphysis may increase breaking strength, various parameters of bone quality and quantity were examined in two large flocks of hens near end of lay. We conclude that the amount of medullary bone in the humerus of hens during the laying period influences bone strength. This medullary bone may not have any intrinsic strength, but may act by contributing to the fracture resistance of the surrounding cortical bone. Using a quantitative, low dose, radiographic technique, we can predict, from early in the laying period, those birds which will develop large amounts of medullary bone in their humeri by the end of the laying period. The formation of medullary bone in the humeral diaphysis is not at the expense of the surrounding radiographed cortical bone

Fibercore AstroGain fiber: multichannel erbium doped fibers for optical space communications

Science.gov (United States)

Hill, Mark; Gray, Rebecca; Hankey, Judith; Gillooly, Andy

2014-03-01

Fibercore have developed AstroGainTM fiber optimized for multichannel amplifiers used in optical satellite communications and control. The fiber has been designed to take full advantage of the photo-annealing effect that results from pumping in the 980nm region. The proprietary trivalent structure of the core matrix allows optimum recovery following radiation damage to the fiber, whilst also providing a market leading Erbium Doped Fiber Amplifier (EDFA) efficiency. Direct measurements have been taken of amplifier efficiency in a multichannel assembly, which show an effective photo-annealing recovery of up to 100% of the radiation induced attenuation through excitation of point defects.

Broadband photonic single sideband frequency up-converter based on the cross polarization modulation effect in a semiconductor optical amplifier for radio-over-fiber systems.

Science.gov (United States)

Lee, Seung-Hun; Kim, Hyoung-Jun; Song, Jong-In

2014-01-13

A broadband photonic single sideband (SSB) frequency up-converter based on the cross polarization modulation (XPolM) effect in a semiconductor optical amplifier (SOA) is proposed and experimentally demonstrated. An optical radio frequency (RF) signal in the form of an optical single sideband (OSSB) is generated by the photonic SSB frequency up-converter to solve the power fading problem caused by fiber chromatic dispersion. The generated OSSB RF signal has almost identical optical carrier power and optical sideband power. This SSB frequency up-conversion scheme shows an almost flat electrical RF power response as a function of the RF frequency in a range from 31 GHz to 75 GHz after 40 km single mode fiber (SMF) transmission. The photonic SSB frequency up-conversion technique shows negligible phase noise degradation. The phase noise of the up-converted RF signal at 49 GHz for an offset of 10 kHz is -93.17 dBc/Hz. Linearity analysis shows that the photonic SSB frequency up-converter has a spurious free dynamic range (SFDR) value of 79.51 dB · Hz(2/3).

Gregarious nesting - An anti-predator response in laying hens

DEFF Research Database (Denmark)

Riber, Anja Brinch

2012-01-01

Gregarious nesting can be defined as a behaviour that occurs when a laying hen (Gallus gallus domesticus) given the choice between an occupied and an unoccupied nest site chooses the occupied nest site. It occurs frequently in flocks of laying hens kept under commercial conditions, contrasting...... the behaviour displayed by feral hens that isolate themselves from the flock during nesting activities. What motivates laying hens to perform gregarious nesting is unknown. One possibility is that gregarious nesting is an anti-predator response to the risk of nest predation emerging from behavioural flexibility...

Ways to Boost Fiber

Science.gov (United States)

... can help to lower cholesterol. Third, it helps prevent constipation and diverticulosis. And fourth, adequate fiber from food ... is similar to a new sponge; it needs water to plump up pass smoothly. If you ... or constipation. Before you reach for the fiber supplements, consider ...

Laying the keel

Energy Technology Data Exchange (ETDEWEB)

Southworth, Brian

1989-12-15

The start of construction of the 87-kilometre US Superconducting Supercollider (SSC) was celebrated in Dallas at the beginning of October with a Texas-style meeting on SSC physics and experiments. Chris Quigg described it as 'laying the keel of a new vessel of discovery'. The vessel is scheduled to make its maiden voyage with 20 TeV (20,000 GeV) proton beams in 1998.

10 CFR 904.11 - Lay off of energy.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Lay off of energy. 904.11 Section 904.11 Energy DEPARTMENT OF ENERGY GENERAL REGULATIONS FOR THE CHARGES FOR THE SALE OF POWER FROM THE BOULDER CANYON PROJECT Power Marketing § 904.11 Lay off of energy. (a) If any Contractor determines that it is temporarily...

Photometric device using optical fibers

International Nuclear Information System (INIS)

Boisde, Gilbert; Perez, J.-J.

1981-02-01

Remote measurements in radioactive environment are now possible with optical fibers. Measurement instruments developed by CEA are constitued of: - an optical probe (5 mm to 1 meter optical path length), - a photometric measurement device, - optical fiber links. 'TELEPHOT' is a photometric device for industrial installations. It is uses interferentiel filters for 2 to 5 simultaneous wave lengths. 'CRUDMETER' measures the muddiness of water. It can be equipped with a high sensitivity cell of 50 cm optical path length tested up to 250 bars. Coupling a double beam spectrophotometer to a remote optical probe, up to 1 meter optical path length, is carried out by means of an optical device using optical fibers links, eventually several hundred meter long. For these equipments special step index large core fibers, 1 to 1.5 mm in diameter, have been developed as well connectors. For industrial control and research these instruments offer new prospect thanks to optical fibers use [fr

Femtosecond nonlinear fiber optics in the ionization regime.

Science.gov (United States)

Hölzer, P; Chang, W; Travers, J C; Nazarkin, A; Nold, J; Joly, N Y; Saleh, M F; Biancalana, F; Russell, P St J

2011-11-11

By using a gas-filled kagome-style photonic crystal fiber, nonlinear fiber optics is studied in the regime of optically induced ionization. The fiber offers low anomalous dispersion over a broad bandwidth and low loss. Sequences of blueshifted pulses are emitted when 65 fs, few-microjoule pulses, corresponding to high-order solitons, are launched into the fiber and undergo self-compression. The experimental results are confirmed by numerical simulations which suggest that free-electron densities of ∼10(17) cm(-3) are achieved at peak intensities of 10(14) W/cm(2) over length scales of several centimeters.

Fiber Optic Microphone

Science.gov (United States)

Cho, Y. C.; George, Thomas; Norvig, Peter (Technical Monitor)

1999-01-01

Research into advanced pressure sensors using fiber-optic technology is aimed at developing compact size microphones. Fiber optic sensors are inherently immune to electromagnetic noise, and are very sensitive, light weight, and highly flexible. In FY 98, NASA researchers successfully designed and assembled a prototype fiber-optic microphone. The sensing technique employed was fiber optic Fabry-Perot interferometry. The sensing head is composed of an optical fiber terminated in a miniature ferrule with a thin, silicon-microfabricated diaphragm mounted on it. The optical fiber is a single mode fiber with a core diameter of 8 micron, with the cleaved end positioned 50 micron from the diaphragm surface. The diaphragm is made up of a 0.2 micron thick silicon nitride membrane whose inner surface is metallized with layers of 30 nm titanium, 30 nm platinum, and 0.2 micron gold for efficient reflection. The active sensing area is approximately 1.5 mm in diameter. The measured differential pressure tolerance of this diaphragm is more than 1 bar, yielding a dynamic range of more than 100 dB.

Wound closure with Karydakis flap is decreasing the perioperative costs after pilonidal sinus excision as compared to lay-open approach.

Science.gov (United States)

Borel, F; Gaudin, C; Duchalais, E; Lehur, P-A; Meurette, G

2017-12-01

To assess the impact of a simple flap closing procedure by Karydakis flap (KF) after pilonidal sinus excision on the costs and healing time as compared to routine lay-open technique. Out of 44 consecutive patients operated on for pilonidal excision (November 2013-March 2015), 17 had a Karydakis flap and 27 a lay-open procedure. For each patient, the length of stay, the operating time (OT), the time needed for complete healing and postoperative care resources were recorded. The global costs included OT, nursing care quantity, and modalities until complete scar healing. One reoperation in the lay-open group was necessary during the follow-up (8±5months). No recurrence occurred. Postoperative morbidity was similar in both groups. Results showed that KF global cost was inferior as compared to lay-open technique (941±178€ vs. 1601±399€; P=0.0001), KF healed faster (32±17 vs. 59±22days; P=0.0001), whereas OT was longer in KF group (16±7 vs. 25±4min; P=0.001). KF allows a faster healing time and a 41% lower cost than lay-open technique. Preferential use of KF rather than lay-open procedure could allow a significant health cost saving. Copyright © 2017. Published by Elsevier Masson SAS.

Perception of altered smile esthetics among Moroccan professionals and lay people.

Science.gov (United States)

Ousehal, L; Aghoutan, H; Chemlali, S; Anssari, I Filali; Talic, N

2016-10-01

To evaluate and compare the impact of altered smile characteristics on the perception of smile esthetics between Moroccan dentists and lay people. Thirty-four digital smile photographs displaying alterations in crown length and width, lateral incisor gingival margin position, gingival exposition, midline diastema, and upper midline deviation were presented to a sample of 30 dentists and 30 lay people. The ratings were assessed with a visual analog scale. Compared to that of lay people, Moroccan dentists' evaluation of the gingival smile was more critical when the decrease in central incisor crown length was 2.5 mm ( p  lay people similarly evaluated irregularities in the incisor gingival margin position. Increases in the midline diastema were judged critically by both Moroccan dentists and lay people. In this sample, Moroccan dentists evaluate smile esthetic alterations more critically than Moroccan lay people. This difference in perception of smile discrepancies must be taken into account during the finishing phases of orthodontic treatment and restoration of the anterior teeth in Moroccan patients.

Perception of Saudi dentists and lay people to altered smile esthetics.

Science.gov (United States)

Talic, Nabeel; Alomar, Samar; Almaidhan, Asma

2013-01-01

To evaluate and compare the perceptions of Saudi dentists and lay people to altered smile features. Thirty-six digital smile photographs with altered features were used. Altered features included the following: crown length, width, gingival level of the lateral incisors, gingival display, midline diastema, and upper midline shift. The photographs were presented to a sample of 30 dentists and 30 lay people with equal gender distribution. Each participant rated each picture with a visual analogue scale, which ranged from 0 (very unattractive) to 100 (very attractive). Dentists were more critical than lay people when evaluating symmetrical crown length discrepancies. Compared to lay people, Saudi dentists gave lower ratings to a crown length discrepancy of >2 mm (P 1 mm (P lay people towards alterations in the gingival level of the lateral incisors or towards a space between the central incisors. No significant sex difference was seen across the groups. In this sample, Saudi dentists gave significantly lower attractiveness scores to crown length and crown width discrepancies, midline deviations, and changes in gingiva to lip distance compared to Saudi lay people.

Nest sharing under semi-natural conditions in laying hens

DEFF Research Database (Denmark)

Riber, Anja Brinch

2012-01-01

problems to laying hens, and egg production may also be negatively affected. Understanding what causes this difference in nest location selection may provide solutions to the problems associated with simultaneous nest sharing. The aims were to investigate whether a commercial strain of laying hens normally...... daily of each nest with regard to number of eggs, position, and materials used. On five mornings nesting behaviour was observed. Nest sharing occurred on all but the first 5 days of egg-laying. The majority of hens (n = 14) chose to visit an occupied nest at least once, but no hens exclusively used...

Investigating behavior changes of laying hens molted by high dietary zinc

OpenAIRE

Smayyeh Salari; Somayyeh Salari

2016-01-01

Introduction The commercial egg industry commonly uses induced molt procedures to rejuvenate flocks for a second or third laying cycle. Molting may be induced by feed withdrawal for up to 10 days (7), water withdrawal for 2 days (19), or both, along with a reduction of day length (14). Such programs cause concern about animal welfare because it is thought that they may be harmful to hens (28). Given the concerns for potential bird stress, various methods of nutrient restriction that would avo...

Fiber-Optic Chemical Sensors and Fiber-Optic Bio-Sensors

Directory of Open Access Journals (Sweden)

Marie Pospíšilová

2015-09-01

Full Text Available This review summarizes principles and current stage of development of fiber-optic chemical sensors (FOCS and biosensors (FOBS. Fiber optic sensor (FOS systems use the ability of optical fibers (OF to guide the light in the spectral range from ultraviolet (UV (180 nm up to middle infrared (IR (10 μm and modulation of guided light by the parameters of the surrounding environment of the OF core. The introduction of OF in the sensor systems has brought advantages such as measurement in flammable and explosive environments, immunity to electrical noises, miniaturization, geometrical flexibility, measurement of small sample volumes, remote sensing in inaccessible sites or harsh environments and multi-sensing. The review comprises briefly the theory of OF elaborated for sensors, techniques of fabrications and analytical results reached with fiber-optic chemical and biological sensors.

Fiber

Science.gov (United States)

... meals instead of white rice. Add beans (kidney, black, navy, and pinto) to rice dishes for even more fiber. Spice up salads with berries and almonds, chickpeas, cooked artichokes, and beans (kidney, black, navy, or pinto). Use whole-grain (corn or ...

Flexible biodegradable citrate-based polymeric step-index optical fiber.

Science.gov (United States)

Shan, Dingying; Zhang, Chenji; Kalaba, Surge; Mehta, Nikhil; Kim, Gloria B; Liu, Zhiwen; Yang, Jian

2017-10-01

Implanting fiber optical waveguides into tissue or organs for light delivery and collection is among the most effective ways to overcome the issue of tissue turbidity, a long-standing obstacle for biomedical optical technologies. Here, we report a citrate-based material platform with engineerable opto-mechano-biological properties and demonstrate a new type of biodegradable, biocompatible, and low-loss step-index optical fiber for organ-scale light delivery and collection. By leveraging the rich designability and processibility of citrate-based biodegradable polymers, two exemplary biodegradable elastomers with a fine refractive index difference and yet matched mechanical properties and biodegradation profiles were developed. Furthermore, we developed a two-step fabrication method to fabricate flexible and low-loss (0.4 db/cm) optical fibers, and performed systematic characterizations to study optical, spectroscopic, mechanical, and biodegradable properties. In addition, we demonstrated the proof of concept of image transmission through the citrate-based polymeric optical fibers and conducted in vivo deep tissue light delivery and fluorescence sensing in a Sprague-Dawley (SD) rat, laying the groundwork for realizing future implantable devices for long-term implantation where deep-tissue light delivery, sensing and imaging are desired, such as cell, tissue, and scaffold imaging in regenerative medicine and in vivo optogenetic stimulation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Digestibility of organic processed feed ingredients in laying hens

OpenAIRE

van Krimpen, M.M.; van Diepen, J.T.M; Reuvekamp, B.F.J.; van Harn, J.

2011-01-01

In two experiments, digestibility and nutritive value for laying hens of organically-grown feed raw materials was assessed. Digestibility and metabolisable energy content of the products differed considerably compared to those listed in the CVB Feedstuff Table. Laying hens, organic feed raw materials, digestibility, nutritive value

Effect of dietary threonine on laying performance and intestinal immunity of laying hens fed low-crude-protein diets during the peak production period.

Science.gov (United States)

Azzam, M M M; Dong, X Y; Zou, X T

2017-10-01

Threonine (Thr) may be a limiting amino acid for laying hens fed diets with lowered protein level. An experiment was conducted to examine laying performance, and the intestinal immune function of laying hens provided diets varying in digestible Thr levels. Lohmann Brown laying hens (n = 480), 28 weeks of age, were allocated to six dietary treatments, each of which included five replicates of 16 hens. Dietary crude protein (CP) 16.18% diet was offered as the positive control diet. L-Thr was added to the negative diet (14.16% CP) by 0, 1.0, 2.0, 3.0 and 4.0 g/kg, corresponding 0.44%, 0.43%, 0.49%, 0.57%, 0.66% and 0.74% digestible Thr. At 40 weeks, a reduction in CP level decreased laying performance (p hens fed 0.66% Thr showed the lowest value (p feed conversion ratio (FCR). Serum level of uric acid showed the lowest values (p hens fed the low-CP diet compared with hens fed CP (16.18%) and hens fed 0.57-0.66%. Expressions of ileal MUC2 mRNA maximized (p hens during the peak production period. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

Pengaruh Alkalisasi Komposit Serat Kelapa-Poliester Terhadap Kekuatan Tarik

OpenAIRE

Maryanti, Budha; Sonief, Ahmad As'ad; Wahyudi, Slamet

2011-01-01

The purpose of this research is to analyze the effect of alkalization on the tensile strength and strain of coconut fiber composites with polyester matrix by varying the concentration of NaOH as follow 0%, 2%, 5% and 8%. Alkalization is one of modifications natural fibers to improve fiber-matrix compatibility.The method of this research used a hands lay-up method. As follow the 1st coconut fiber treated without alkalization or 0% alkalization and the 2nd coconut fiber immersed in alkaline sol...

Safety evaluation of phytosterols in laying hens: effects on laying performance, clinical blood parameters, and organ development.

Science.gov (United States)

Shi, S R; Shen, Y R; Chang, L L; Zhou, C J; Bo, Z; Wang, Z Y; Tong, H B; Zou, J M

2014-03-01

Phytosterols are intended for use as a novel food ingredient with plasma cholesterol-lowering activity. Although phytosterols are naturally present in the normal diet, daily consumption is insufficient to ensure plasma cholesterol-lowering levels. Therefore, phytosterols may be added to the diets to achieve the desired cholesterol-lowering activity. A subchronic laying hen safety study was conducted to examine if high-dose phytosterols could affect the safety of hens. Three hundred sixty 21-wk-old Hy-Line Brown laying hens were randomly assigned to 5 groups with 6 replicates of 12 birds each; after 3 wk, birds were fed diets supplemented with 0, 20, 80, 400, and 800 mg/kg of phytosterols for 12 wk. Throughout the study, clinical observations and laying performance were measured. At the end of the study, birds were subjected to a full postmortem examination: blood samples were taken for clinical pathology, selected organs were weighed, and specified tissues were taken for subsequent histological examination. No treatment-related changes that were considered to be of toxicological significance were observed. Therefore, a nominal phytosterol concentration of 800 mg/kg was considered to be the no-observed-adverse-effect level.

Highly Conductive Graphene/Ag Hybrid Fibers for Flexible Fiber-Type Transistors.

Science.gov (United States)

Yoon, Sang Su; Lee, Kang Eun; Cha, Hwa-Jin; Seong, Dong Gi; Um, Moon-Kwang; Byun, Joon-Hyung; Oh, Youngseok; Oh, Joon Hak; Lee, Wonoh; Lee, Jea Uk

2015-11-09

Mechanically robust, flexible, and electrically conductive textiles are highly suitable for use in wearable electronic applications. In this study, highly conductive and flexible graphene/Ag hybrid fibers were prepared and used as electrodes for planar and fiber-type transistors. The graphene/Ag hybrid fibers were fabricated by the wet-spinning/drawing of giant graphene oxide and subsequent functionalization with Ag nanoparticles. The graphene/Ag hybrid fibers exhibited record-high electrical conductivity of up to 15,800 S cm(-1). As the graphene/Ag hybrid fibers can be easily cut and placed onto flexible substrates by simply gluing or stitching, ion gel-gated planar transistors were fabricated by using the hybrid fibers as source, drain, and gate electrodes. Finally, fiber-type transistors were constructed by embedding the graphene/Ag hybrid fiber electrodes onto conventional polyurethane monofilaments, which exhibited excellent flexibility (highly bendable and rollable properties), high electrical performance (μh = 15.6 cm(2) V(-1) s(-1), Ion/Ioff > 10(4)), and outstanding device performance stability (stable after 1,000 cycles of bending tests and being exposed for 30 days to ambient conditions). We believe that our simple methods for the fabrication of graphene/Ag hybrid fiber electrodes for use in fiber-type transistors can potentially be applied to the development all-organic wearable devices.

The emotional wellbeing of lay HIV counselling and testing ...

African Journals Online (AJOL)

Lay counsellors are expected to educate clients about HIV/AIDS, advocate behaviour change, convey test results and support those infected and affected to cope with the emotional and social challenges associated with HIV/AIDS. This research focuses on the emotional wellbeing of lay HCT counsellors because this ...

Long Reach RFID-over-Fiber Distribution and Collection Network

DEFF Research Database (Denmark)

Madsen, Peter; Suhr, Lau Frejstrup; Vegas Olmos, Juan José

This paper presents an RFID-over-Fiber wireless track and trace system using active RFID tags. This paper demonstrates a system, operating over distances up to 30km of optical fiber and 50m of wireless readability.......This paper presents an RFID-over-Fiber wireless track and trace system using active RFID tags. This paper demonstrates a system, operating over distances up to 30km of optical fiber and 50m of wireless readability....

Soft capacitor fibers using conductive polymers for electronic textiles

Science.gov (United States)

Gu, Jian Feng; Gorgutsa, Stephan; Skorobogatiy, Maksim

2010-11-01

A novel, highly flexible, conductive polymer-based fiber with high electric capacitance is reported. In its cross section the fiber features a periodic sequence of hundreds of conductive and isolating plastic layers positioned around metallic electrodes. The fiber is fabricated using the fiber drawing method, where a multi-material macroscopic preform is drawn into a sub-millimeter capacitor fiber in a single fabrication step. Several kilometers of fibers can be obtained from a single preform with fiber diameters ranging between 500 and 1000 µm. A typical measured capacitance of our fibers is 60-100 nF m-1 and it is independent of the fiber diameter. Analysis of the fiber frequency response shows that in its simplest interrogation mode the capacitor fiber has a transverse resistance of 5 kΩ m L-1, which is inversely proportional to the fiber length L and is independent of the fiber diameter. Softness of the fiber materials, the absence of liquid electrolyte in the fiber structure, ease of scalability to large production volumes and high capacitance of our fibers make them interesting for various smart textile applications ranging from distributed sensing to energy storage.

Soft capacitor fibers using conductive polymers for electronic textiles

International Nuclear Information System (INIS)

Gu, Jian Feng; Gorgutsa, Stephan; Skorobogatiy, Maksim

2010-01-01

A novel, highly flexible, conductive polymer-based fiber with high electric capacitance is reported. In its cross section the fiber features a periodic sequence of hundreds of conductive and isolating plastic layers positioned around metallic electrodes. The fiber is fabricated using the fiber drawing method, where a multi-material macroscopic preform is drawn into a sub-millimeter capacitor fiber in a single fabrication step. Several kilometers of fibers can be obtained from a single preform with fiber diameters ranging between 500 and 1000 µm. A typical measured capacitance of our fibers is 60–100 nF m −1 and it is independent of the fiber diameter. Analysis of the fiber frequency response shows that in its simplest interrogation mode the capacitor fiber has a transverse resistance of 5 kΩ m L −1 , which is inversely proportional to the fiber length L and is independent of the fiber diameter. Softness of the fiber materials, the absence of liquid electrolyte in the fiber structure, ease of scalability to large production volumes and high capacitance of our fibers make them interesting for various smart textile applications ranging from distributed sensing to energy storage

Raman fiber lasers

CERN Document Server

2017-01-01

This book serves as a comprehensive, up-to-date reference about this cutting-edge laser technology and its many new and interesting developments. Various aspects and trends of Raman fiber lasers are described in detail by experts in their fields. Raman fiber lasers have progressed quickly in the past decade, and have emerged as a versatile laser technology for generating high power light sources covering a spectral range from visible to mid-infrared. The technology is already being applied in the fields of telecommunication, astronomy, cold atom physics, laser spectroscopy, environmental sensing, and laser medicine. This book covers various topics relating to Raman fiber laser research, including power scaling, cladding and diode pumping, cascade Raman shifting, single frequency operation and power amplification, mid-infrared laser generation, specialty optical fibers, and random distributed feedback Raman fiber lasers. The book will appeal to scientists, students, and technicians seeking to understand the re...

Fiber Reinfoced Polymer Used for Flooding Protection of Engineering Structures Made of RC and Brick Masonry

Directory of Open Access Journals (Sweden)

Gabriel Oprişan

2008-01-01

Full Text Available Urban and rural floods are becoming nowadays a frequent problem to be dealt with, by both the population and the authorities. Floods and flood related natural disasters act against the civil, industrial and agricultural structures by the hydrostatic and hydrodynamic pressures of water. A set of protective solutions based on Fiber Reinforced Polymer (FRP composite materials, for structural elements of buildings subjected to flood loadings, is proposed and analysed. These solutions are achieved by using the hand lay-up forming technique utilizing glass, carbon or aramid fibers fabrics pre-impregnated with thermosetting epoxy, polyester or vynilester resins. The application of these FRP composites is carried out on reinforced concrete columns and beams as well as on brick masonry works aiming to increase in the overall load bearing capacity, especially against horizontal loads. An improved protection against excessive humidity is also envisaged. The Finite Elements Method based LUSAS software was used to simulate a partially flooded structure. The numerical modeling was carried out in both the un-strengthened and strengthened conditions of the structure in order to assess the increasing in load and deformation capacities of the structural elements. Volumetric finite elements were used for modeling the concrete and masonry members.

Symptom appraisal, help seeking, and lay consultancy for symptoms of head and neck cancer.

Science.gov (United States)

Queenan, J A; Gottlieb, B H; Feldman-Stewart, D; Hall, S F; Irish, J; Groome, P A

2018-01-01

Early diagnosis is important in head and neck cancer (HNC) patients to maximize the effectiveness of the treatments and minimize the debilitation associated with both the cancer and the invasive treatments of advanced disease. Many patients present with advanced disease, and there is little understanding as to why. This study investigated patients' symptom appraisal, help seeking, and lay consultancy up to the time they first went to see a health care professional (HCP). We interviewed 83 patients diagnosed with HNC. The study design was cross sectional and consisted of structured telephone interviews and a medical chart review. We gathered information on the participant's personal reactions to their symptoms, characteristics of their social network, and the feedback they received. We found that 18% of the participants thought that their symptoms were urgent enough to warrant further investigation. Participants rarely (6%) attributed their symptoms to cancer. Eighty-nine percent reported that they were unaware of the early warning signs and symptoms of HNC. Fifty-seven percent of the participants disclosed their symptoms to at least one lay consultant before seeking help from an HCP. The lay consultants were usually their spouse (77%), and the most common advice they offered was to see a doctor (76%). Lastly, 81% of the participants report that their spouse influenced their decision to see an HCP. The results of this study suggest that patients frequently believe that their symptoms were nonurgent and that their lay consultants influence their decision to seek help from an HCP. Copyright © 2017 John Wiley & Sons, Ltd.

Development of furnished cages for laying hens.

Science.gov (United States)

Appleby, M C; Walker, A W; Nicol, C J; Lindberg, A C; Freire, R; Hughes, B O; Elson, H A

2002-09-01

1. A 3-year trial was carried out of cages for laying hens, occupying a full laying house. The main cage designs used were 5000 cm2 in area, 50 cm high at the rear and furnished with nests and perches. F cages had a front rollaway nest at the side, lined with artificial turf. FD cages also had a dust bath containing sand over the nest. H cages had two nest hollows at the side, one in front of the other. They were compared with conventional cages 2500 cm2 in area and 38 cm high at the rear. 2. Cages were stocked with from 4 to 8 ISA Brown hens per cage, resulting in varied allowances of area, feeder and perch per bird. No birds were beak trimmed. In F and FD cages two further treatments were applied: nests and dust baths were sometimes fitted with gates to exclude birds from dust baths in the morning and from both at night; elevated food troughs, with a lip 33 cm above the cage floor, were compared with standard troughs. 3. Management of the house was generally highly successful, with temperature control achieved by ventilation. Egg production was above breeders' standards and not significantly affected by cage design. More eggs per bird were collected when there were fewer birds per cage but food consumption also then tended to be higher. 4. The number of downgraded eggs was variable, with some tendency for more in furnished cages. Eggs laid in dust baths were often downgraded. Those laid at the back of the cage were frequently dirty because of accumulation of droppings. H nests were unsuccessful, with less than 50% of eggs laid in the nest hollows. However, up to 93% of eggs were laid in front rollaways, and few of these were downgraded. 5. Feather and foot damage were generally less in furnished than in conventional cages, greater where there were more birds per cage. With an elevated food trough there was less feather damage but more overgrowth of claws. In year 2, mortality was greater in cages with more birds. 6. Pre-laying behaviour was mostly settled in

Bound water in Kevlar 49 fibers

International Nuclear Information System (INIS)

Garza, R.G.; Pruneda, C.O.; Morgan, R.J.

1981-01-01

From elemental analyses, thermogravimetric-mass spectroscopy studies and re-evaluation of previous water diffusion studies in Kevlar 49 fibers it is concluded that these fibers can contain two types of sorbed moisture. The fibers can absorb up to approx. 6 wt % loosely bound water with an activation energy for outgassing by desorption of 6 kcal/mole. This loosely bound water is a direct result of the presence of Na 2 SO 4 impurities and the perturbations they induce on the packing of the rod-like poly (p-phenylene terephthalamide) macromolecules. Kevlar 49 fibers also inherently contain up to 30 wt % additional water which is tightly bound within the crystal lattice. This water exhibits an activation energy for outgassing by diffusion of approx. 40 kcal/mole and is only evolved from the fiber in significant quantities at t > 350 0 C over a period of hours

Growing Fixed With Age: Lay Theories of Malleability Are Target Age-Specific.

Science.gov (United States)

Neel, Rebecca; Lassetter, Bethany

2015-11-01

Beliefs about whether people can change ("lay theories" of malleability) are known to have wide-ranging effects on social motivation, cognition, and judgment. Yet rather than holding an overarching belief that people can or cannot change, perceivers may hold independent beliefs about whether different people are malleable-that is, lay theories may be target-specific. Seven studies demonstrate that lay theories are target-specific with respect to age: Perceivers hold distinct, uncorrelated lay theories of people at different ages, and younger targets are considered to be more malleable than older targets. Both forms of target-specificity are consequential, as target age-specific lay theories predict policy support for learning-based senior services and the rehabilitation of old and young drug users. The implications of target age-specific lay theories for a number of psychological processes, the social psychology of aging, and theoretical frameworks of malleability beliefs are discussed. © 2015 by the Society for Personality and Social Psychology, Inc.

HIV rapid diagnostic testing by lay providers in a key population-led health service programme in Thailand.

Science.gov (United States)

Wongkanya, Rapeeporn; Pankam, Tippawan; Wolf, Shauna; Pattanachaiwit, Supanit; Jantarapakde, Jureeporn; Pengnongyang, Supabhorn; Thapwong, Prasopsuk; Udomjirasirichot, Apichat; Churattanakraisri, Yutthana; Prawepray, Nanthika; Paksornsit, Apiluk; Sitthipau, Thidadaow; Petchaithong, Sarayut; Jitsakulchaidejt, Raruay; Nookhai, Somboon; Lertpiriyasuwat, Cheewanan; Ongwandee, Sumet; Phanuphak, Praphan; Phanuphak, Nittaya

2018-01-01

Introduction:  Rapid diagnostic testing (RDT) for HIV has a quick turn-around time, which increases the proportion of people testing who receive their result. HIV RDT in Thailand has traditionally been performed only by medical technologists (MTs), which is a barrier to its being scaled up. We evaluated the performance of HIV RDT conducted by trained lay providers who were members of, or worked closely with, a group of men who have sex with men (MSM) and with transgender women (TG) communities, and compared it to tests conducted by MTs. Methods:  Lay providers received a 3-day intensive training course on how to perform a finger-prick blood collection and an HIV RDT as part of the Key Population-led Health Services (KPLHS) programme among MSM and TG. All the samples were tested by lay providers using Alere Determine HIV 1/2. HIV-reactive samples were confirmed by DoubleCheckGold Ultra HIV 1&2 and SD Bioline HIV 1/2. All HIV-positive and 10% of HIV-negative samples were re-tested by MTs using Serodia HIV 1/2. Results:  Of 1680 finger-prick blood samples collected and tested using HIV RDT by lay providers in six drop-in centres in Bangkok, Chiang Mai, Chonburi and Songkhla, 252 (15%) were HIV-positive. MTs re-tested these HIV-positive samples and 143 randomly selected HIV-negative samples with 100% concordant test results. Conclusion:  Lay providers in Thailand can be trained and empowered to perform HIV RDT as they were found to achieve comparable results in sample testing with MTs. Based on the task-shifting concept, this rapid HIV testing performed by lay providers as part of the KPLHS programme has great potential to enhance HIV prevention and treatment programmes among key at-risk populations.

29 CFR 18.701 - Opinion testimony by lay witnesses.

Science.gov (United States)

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Opinion testimony by lay witnesses. 18.701 Section 18.701 Labor Office of the Secretary of Labor RULES OF PRACTICE AND PROCEDURE FOR ADMINISTRATIVE HEARINGS... Opinion testimony by lay witnesses. If the witness is not testifying as an expert, the witness' testimony...

Optical-fiber interferometer for velocity measurements with picosecond resolution

International Nuclear Information System (INIS)

Weng Jidong; Tan Hua; Wang Xiang; Ma Yun; Hu Shaolou; Wang Xiaosong

2006-01-01

The conventional Doppler laser-interference velocimeters are made up of traditional optical elements such as lenses and mirrors and will generally restrict its applications in multipoint velocity measurements. By transfering the light from multimode optical fiber to single-mode optical fiber and using the currently available conventional telecommunications elements, the authors have constructed a velocimeter called all-fiber displacement interferometer system for any reflector. The unique interferometer system is only made up of fibers or fiber-coupled components. The viability of this technique is demonstrated by measuring the velocity of an interface moving at velocity of 2133 m/s with 50 ps time resolution. In addition, the concept of optical-fiber mode conversion would provide a way to develop various optical-fiber sensors

Microstructured hollow fibers for ultrafiltration

NARCIS (Netherlands)

Culfaz, Pmar Zeynep; Culfaz, P.Z.; Rolevink, Hendrikus H.M.; van Rijn, C.J.M.; Lammertink, Rob G.H.; Wessling, Matthias

2010-01-01

Hollow fiber ultrafiltration membranes with a corrugated outer microstructure were prepared from a PES/PVP blend. The effect of spinning parameters such as air gap, take-up speed, polymer dope viscosity and coagulation value on the microstructure and membrane characteristics was investigated. Fibers

Lay First Responder Training in Eastern Uganda: Leveraging Transportation Infrastructure to Build an Effective Prehospital Emergency Care Training Program.

Science.gov (United States)

Delaney, Peter G; Bamuleke, Richard; Lee, Yang Jae

2018-01-18

Though road traffic injuries (RTIs) are a major cause of mortality in East Africa, few countries have emergency medical services. The aim was to create a sustainable and efficient prehospital lay first responder program, creating a system with lay first responders spread through the 53 motorcycle taxi stages of Iganga Municipality. One hundred and fifty-four motorcycle taxi riders were taught a first aid curriculum in partnership with a local Red Cross first aid trainer and provided with a first aid kit following WHO guidelines for basic first aid. Pre- and post-survey tests measured first aid knowledge improvement over the course. Post-implementation incident report forms were collected from lay first responders after each patient encounter over 6 months. Follow-up interviews were conducted with 110 of 154 trainees, 9 months post-training. Improvement was measured across all five major first aid categories: bleeding control (56.9 vs. 79.7%), scene management (37.6 vs. 59.5%), airway and breathing (43.4 vs. 51.6%), recovery position (13.1 vs. 43.4%), and victim transport (88.2 vs. 94.3%). From the incident report findings, first responders treated 250 victims (82.8% RTI related) and encountered 24 deaths (9.6% of victims). Of the first aid skills, bleeding control and bandaging was used most often (55.2% of encounters). Lay first responders provided transport in 48.3% of encounters. Of 110 lay first responders surveyed, 70 of 76 who had used at least one skill felt "confident" in the care they provided. A prehospital care system composed of lay first responders can be developed leveraging existing transport organizations, offering a scalable alternative for LMICs, demonstrating usefulness in practice and measurable educational improvements in trauma skills for non-clinical lay responders.

Nonlinear fiber optics formerly quantum electronics

CERN Document Server

Agrawal, Govind

1995-01-01

The field of nonlinear fiber optics has grown substantially since the First Edition of Nonlinear Fiber Optics, published in 1989. Like the First Edition, this Second Edition is a comprehensive, tutorial, and up-to-date account of nonlinear optical phenomena in fiber optics. It synthesizes widely scattered research material and presents it in an accessible manner for students and researchers already engaged in or wishing to enter the field of nonlinear fiber optics. Particular attention is paid to the importance of nonlinear effects in the design of optical fiber communication systems. This is

Genetic analysis of feather pecking behavior in laying hens

NARCIS (Netherlands)

Buitenhuis, A.J.

2003-01-01

This thesis describes the genetic analysis of feather pecking behavior in laying hens. Feather pecking (FP) is a major welfare problem in laying hens.In the European

Highly-wrinkled reduced graphene oxide-conductive polymer fibers for flexible fiber-shaped and interdigital-designed supercapacitors

Science.gov (United States)

Li, Bo; Cheng, Jianli; Wang, Zhuanpei; Li, Yinchuan; Ni, Wei; Wang, Bin

2018-02-01

Flexible supercapacitors have attracted great interest due to outstanding flexibility and light weight. Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) fibers have the great potential in using as electrodes for flexible supercapacitors due to the good flexibility. However, the reported conductivity and specific capacitance of these PEDOT: PSS fibers are not very high, which limit their electrochemical performances. In this work, composite fibers of reduced graphene oxide(rGO)-PEDOT: PSS with a highly-wrinkled structure on the surface and pores inside are prepared by wet spinning. The fibers with different ratios of graphene to PEDOT:PSS show a distinctly enhanced conductivity up to ca. 590 S·cm-1 and high strength up to ca. 18.4 MPa. Meanwhile, the composite fibers show an improved electrochemical performances, including a high specific areal capacitance of 131 mF cm-2 and high specific areal energy density of 4.55 μWh·cm-2. The flexible supercapacitors including fiber-shaped supercapacitors and interdigital designed supercapacitors not only could work in different bending states without obvious capacitance decay, but also have small leakage current. The interdigital design can further improve the performances of composite fibers with high capacitance and high utilization compared with traditional parallel connected structure.

Influence of Fiber Volume Fraction on the Tensile Properties and Dynamic Characteristics of Coconut Fiber Reinforced Composite

OpenAIRE

Izzuddin Zaman; Al Emran Ismail; Muhamad Khairudin Awang

2011-01-01

The utilization of coconut fibers as reinforcement in polymer composites has been increased significantly due to their low cost and high specific mechanical properties. In this paper, the mechanical properties and dynamic characteristics of a proposed combined polymer composite which consist of a polyester matrix and coconut fibers are determined. The influence of fibers volume fraction (%) is also evaluated and composites with volumetric amounts of coconut fiber up to 15% are fabricated. In ...

Lay Definitions of Happiness across Nations: The Primacy of Inner Harmony and Relational Connectedness.

Science.gov (United States)

Delle Fave, Antonella; Brdar, Ingrid; Wissing, Marié P; Araujo, Ulisses; Castro Solano, Alejandro; Freire, Teresa; Hernández-Pozo, María Del Rocío; Jose, Paul; Martos, Tamás; Nafstad, Hilde E; Nakamura, Jeanne; Singh, Kamlesh; Soosai-Nathan, Lawrence

2016-01-01

In well-being research the term happiness is often used as synonymous with life satisfaction. However, little is known about lay people's understanding of happiness. Building on the available literature, this study explored lay definitions of happiness across nations and cultural dimensions, analyzing their components and relationship with participants' demographic features. Participants were 2799 adults (age range = 30-60, 50% women) living in urban areas of Argentina, Brazil, Croatia, Hungary, India, Italy, Mexico, New Zealand, Norway, Portugal, South Africa, and United States. They completed the Eudaimonic and Hedonic Happiness Investigation (EHHI), reporting, among other information, their own definition of happiness. Answers comprised definitions referring to a broad range of life domains, covering both the contextual-social sphere and the psychological sphere. Across countries and with little variation by age and gender, inner harmony predominated among psychological definitions, and family and social relationships among contextual definitions. Whereas relationships are widely acknowledged as basic happiness components, inner harmony is substantially neglected. Nevertheless, its cross-national primacy, together with relations, is consistent with the view of an ontological interconnectedness characterizing living systems, shared by several conceptual frameworks across disciplines and cultures. At the methodological level, these findings suggest the potential of a bottom-up, mixed method approach to contextualize psychological dimensions within culture and lay understanding.

Fabrication and characterization of special microstructured fibers

Science.gov (United States)

Kobelke, J.; Schuster, K.; Schwuchow, A.; Litzkendorf, D.; Spittel, R.; Kirchhof, J.; Bartelt, H.

2011-05-01

Microstructured optical fibers (MOFs) as a novel type of light guiding media typically combine structural elements with very different chemical and optical behavior, e.g. silica - air, silica - high refractive index glasses. The applicative potential is very manifold: devices for telecommunication, nonlinear optics, sensing devices, fiber based gas lasers, etc. We report about preparation and characterization of selected total internal reflection (TIR) guiding MOFs: Air Clad Fiber, Suspended Core Fiber and heavy metal oxide (HMO) glass core MOFs. We fabricated Air Clad Fibers with extreme air fraction. The bridge width of about 0.13 μm corresponds to a numerical aperture (NA) of about 0.6. Suspended core fibers for evanescent sensing were prepared by pressurized drawing of arrangements of three and four capillaries. By inflating the cavities the NA was increased up to 0.68. Material combined MOFs were prepared for nonlinear application (e.g. supercontinuum generation) with lanthanum aluminum silicate glass core. Thermochemical and optical behaviors of high nonlinear core glass candidates were investigated for alumina concentration up to 20 mol% and lanthanum oxide concentration up to 24 mol% in silica matrix. The manufactured HMO glass core MOF with a La2O3 concentration of 10 mol% shows a similar background loss level like the unstructured HMO glass fiber about 1 dB/m.

A cybernetic view on wind-up.

Science.gov (United States)

Farajidavar, Aydin; Gharibzadeh, Shahriar; Towhidkhah, Farzad; Saeb, Sohrab

2006-01-01

Wind-up is described traditionally as a frequency dependent increase in the excitability of spinal cord neurons, evoked by electrical stimulation of afferent C-fibers. Different kinds of wind-up have been reported, but wind-up of Abeta fibers in hyperalgesic states has gained little attention. In this paper, we present a cybernetic view on Abeta fiber wind-up and consider the involved molecular mechanisms as feedback and feedforward processes. Furthermore, our previous hypothesis, the sprouting phenomenon, is included in this view. Considering the proposed model, wind-up in hyperalgesic states might leave out in three different ways: (1) blocking the NMDA receptors by increasing extracellular Mg2+, 2) blocking the receptors and channels that contribute to Ca2+ inward current, and 3) blocking the Abeta fibers by local anesthetics. It seems that wind-up may be inhibited more effectively by using these three blocking mechanisms simultaneously, because in this case, the feedback process (main controller), the feedforward process (trigger), and Abeta stimulation (trigger) would be inhibited concurrently. Wind up may aggravate the pain in clinical hyperalgesic situations such as post-surgical states, some neuropathic pains, fibromyalgia syndrome, and post-herpetic neuralgia. Surely, clinical studies are needed to validate the effectiveness of our abovementioned suggestions in relieving such clinical pains.

Sodium levels in the diets of semi-heavy laying hens reared in a hot climate after peak lay

Directory of Open Access Journals (Sweden)

A. S. A. Assunção

2017-03-01

Full Text Available The objective of this study was to estimate the sodium (Na requirements of semi-heavy laying hens reared in a hot climate after peak lay. A total of 120 Hisex Brown hens, 48 weeks of age, were used. The birds were allocated in a completely randomized design consisting of five treatments, six replicates and four animals per experimental unit. The experimental diets were formulated with corn and soybean meal and the treatments consisted of five levels of sodium (0.12, 0.17, 0.22, 0.27 and 0.32% derived from common salt. The following parameters were evaluated: feed intake (g, egg production (%, egg weight (g, egg mass (g, feed conversion (kg per kilogram of eggs and per dozen eggs, specific gravity (g/cm3, shell thickness (mm, egg components including egg yolk (g and %, albumin (g and % and shell (g and %, viability (%, and variation in body weight (g of the birds. There was no effect (P>0.05 of sodium levels on egg yolk weight (g or albumin percentage. A decreasing linear effect (P<0.01 was observed for feed intake, which decreased with increasing sodium level in the diet. A quadratic effect (P<0.05 was found for egg production, egg weight, feed conversion per kilogram of eggs and dozen eggs, albumin and shell weight, specific gravity, shell thickness, and percentage of shell and egg yolk. A sodium level higher than 0.27% negatively influenced egg components and zootechnical performance of the birds. The inclusion of 0.20% sodium in the diet after peak lay is recommended for semi-heavy laying hens reared in a hot climate to increase egg quality and productive performance.

Scintillating optical fibers for fine-grained hodoscopes

International Nuclear Information System (INIS)

Borenstein, S.R.; Strand, R.C.

1981-01-01

Fast detectors with fine spatial resolution will be needed to exploit high event rates at ISABELLE. Scintillating optical fibers for fine grained hodoscopes have been developed by the authors. A commercial manufacturer of optical fibers has drawn and clad PVT scintillator. Detection efficiencies greater than 99% have been achieved for a 1 mm fiber with a PMT over lengths up to 60 cm. Small diameter PMT's and avalanche photodiodes have been tested with the fibers. Further improvements are sought for the fiber and for the APD's sensitivity and coupling efficiency with the fiber

THERMAL CONDUCTIVITY OF SIC AND C FIBERS

Energy Technology Data Exchange (ETDEWEB)

Youngblood, Gerald E.; Senor, David J.; Kowbel, W.; Webb, J.; Kohyama, Akira

2000-09-01

Several rod-shaped specimens with uniaxially packed fibers (Hi-Nicalon, Hi-Nicalon Type S, Tyranno SA and Amoco K1100 types) and a pre-ceramic polymer matrix have been fabricated. By using appropriate analytic models, the bare fiber thermal conductivity (Kf) and the interface thermal conductance (h) will be determined as a function of temperature up to 1000?C before and after irradiation for samples cut from these rods. Initial results are: (1) for unirradiated Hi-Nicalon SiC fiber, Kf varied from 4.3 up to 5.9 W/mK for the 27-1000?C range, (2) for unirradiated K1100 graphite fiber, Kf varied from 576 down to 242 W/mK for the 27-1000?C range, and (3) h = 43 W/cm2K at 27?C as a typical fiber/matrix interface conductance.

Case report of misdiagnosis of Avian Colibacillosis in laying Birds ...

African Journals Online (AJOL)

Two freshly dead 27 weeks old Issa brown laying birds from a population of about 3000 birds with history of blindness, greenish-whitish diarrhoea, symptomatic diagnosis of coccidiosis, treatment failure, reduced egg lay and increased mortality was presented for postmortem examination and diagnosis. Postmortem ...

Fabrication of high quality, ultra-long fiber Bragg gratings: up to 2 million periods in phase.

Science.gov (United States)

Gagné, Mathieu; Loranger, Sébastien; Lapointe, Jerome; Kashyap, Raman

2014-01-13

The fabrication and characterization of high quality ultra-long (up to 1m) fiber Bragg gratings (FBGs) is reported. A moving phase mask and an electro-optic phase-modulation (EOPM) based interferometer are used with a high precision 1-meter long translation stage and compared. A novel interferometer position feedback scheme to simplify the fabrication process is proposed and analyzed. The ultra-long uniform FBGs show near perfect characteristics of a few picometers bandwidth, symmetrical, near theory-matching group-delay and transmission spectra. Grating characterization using optical backscattering reflectometry and chirped FBGs are also demonstrated. Limitations of the schemes are discussed.

Framework for replacing steel with aluminum fibers in bituminous mixes

NARCIS (Netherlands)

Pavlatos, N.; Apostolidis, P.; Scarpas, Athanasios

2018-01-01

This research explores the incentives for replacing steel fibers with aluminum fibers in fiber modified bituminous mixes. In this work the focus is on fiber modified bituminous mixes especially designed for induction heating. Inductive fibers are heated up because eddy currents are generated -

High-Capacity Transmission Using High-Density Multicore Fiber

DEFF Research Database (Denmark)

Morioka, Toshio

2017-01-01

There have been intense research activities on SDM technologies including SDM fibers, MC-, MM-amplifiers, DEMUXs/DEMUXs with record-breaking transmission demonstrations up to 2 Pbit/s. 100 (20 dB) SDM gain, i.e. 10 Pbit/s per fiber will be a short-term goal in order for the new fibers to be consi......There have been intense research activities on SDM technologies including SDM fibers, MC-, MM-amplifiers, DEMUXs/DEMUXs with record-breaking transmission demonstrations up to 2 Pbit/s. 100 (20 dB) SDM gain, i.e. 10 Pbit/s per fiber will be a short-term goal in order for the new fibers...... to be considered for installation in the future systems although the far long term demand should be transporting 1 Ebit/s per fiber over 1000 km meaning Zbit/s-km. Cost effective network capability such as ADM and XC should also be investigated based on the new SDM schemes. In the 10-20 years time frame, we need...

Fiber optic-based biosensor

Science.gov (United States)

Ligler, Frances S.

1991-01-01

The NRL fiber optic biosensor is a device which measures the formation of a fluorescent complex at the surface of an optical fiber. Antibodies and DNA binding proteins provide the mechanism for recognizing an analyze and immobilizing a fluorescent complex on the fiber surface. The fiber optic biosensor is fast, sensitive, and permits analysis of hazardous materials remote from the instrumentation. The fiber optic biosensor is described in terms of the device configuration, chemistry for protein immobilization, and assay development. A lab version is being used for assay development and performance characterization while a portable device is under development. Antibodies coated on the fiber are stable for up to two years of storage prior to use. The fiber optic biosensor was used to measure concentration of toxins in the parts per billion (ng/ml) range in under a minute. Immunoassays for small molecules and whole bacteria are under development. Assays using DNA probes as the detection element can also be used with the fiber optic sensor, which is currently being developed to detect biological warfare agents, explosives, pathogens, and toxic materials which pollute the environment.

Development of scintillating fiber tracker

International Nuclear Information System (INIS)

Ishikawa, Shuzo; Kawai, Toshihide; Kozaki, Tetsuo

1995-01-01

In order to use thin scintillating fiber (diameter 500 micron) as a particle tracking detector, we have developed a method to construct precise multi-layer scintillating fiber sheets. We have also developed dedicated machines for this purpose. This paper presents the details of the method and the machines. Using these machines, we have produced fiber sheets for CERN WA95/CHORUS, which intend to detect a neutrino oscillation in the νμ-ντ channel using Hybrid Emulsion Set-up. Fiber Trackers are used as a vertex detector which support the neutrino event location in the nuclear emulsion target. (author)

Coupled dynamic analysis of subsea pipe laying operations

Energy Technology Data Exchange (ETDEWEB)

Silva, Danilo Machado Lawinscky da; Jacob, Breno Pinheiro [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Civil. Lab. of Computational Methods and Offshore Systems

2009-12-19

It is recognized that deep water offshore oil exploitation activities requires the use of sophisticated computational tools to predict the behavior of floating offshore systems under the action of environmental loads. These computational tools should be able to perform coupled dynamic analyses, considering the non-linear interaction of the hydrodynamic behavior of the platform with the structural/hydrodynamic behavior of the mooring lines and risers, represented by Finite Element models. The use of such a sophisticated computational tool becomes mandatory not only for the design of production platforms, but also for the simulation of offshore installation operations. For instance, in the installation of submarine pipelines, the wall thickness design may not be governed by the pressure containment requirements of the pipeline during the operation, but by the installation process, specifically the combined action of bending, tension and hydrostatic pressure acting on the pipeline, that is also submitted to the motions of the lay barge. Therefore, the objective of this work is to present the results of numerical simulations of S-lay installation procedures using a computational tool that performs dynamic analysis coupling the structural behavior of the pipe with the hydrodynamic behavior of the vessel motions under environmental conditions. This tool rigorously considers the contact between the pipeline and its supports (lay barge, stinger, seabed). The results are compared to traditional pipe laying simulations based on RAO motions. (author)

Communal egg-laying in reptiles and amphibians: evolutionary patterns and hypotheses.

Science.gov (United States)

Doody, J Sean; Freedberg, Steve; Keogh, J Scott

2009-09-01

Communal egg-laying is widespread among animals, occurring in insects, mollusks, fish, amphibians, reptiles, and birds, just to name a few. While some benefits of communal egg-laying may be pervasive (e.g., it saves time and energy and may ensure the survival of mothers and their offspring), the remarkable diversity in the life histories of the animals that exhibit this behavior presents a great challenge to discovering any general explanation. Reptiles and amphibians offer ideal systems for investigating communal egg-laying because they generally lack parental care--a simplification that brings nest site choice behavior into sharp focus. We exhaustively reviewed the published literature for data on communal egg-laying in reptiles and amphibians. Our analysis demonstrates that the behavior is much more common than previously recognized (occurring in 481 spp.), especially among lizards (N = 255 spp.), where the behavior has evolved multiple times. Our conceptual review strongly suggests that different forces may be driving the evolution and maintenance of communal egg-laying in different taxa. Using a game theory approach, we demonstrate how a stable equilibrium may occur between solitary and communal layers, thus allowing both strategies to co-exist in some populations, and we discuss factors that may influence these proportions. We conclude by outlining future research directions for determining the proximate and ultimate causes of communal egg-laying.

Testing the Link Between Empathy and Lay Theories of Happiness.

Science.gov (United States)

Tullett, Alexa M; Plaks, Jason E

2016-09-20

Happiness is a topic that ignites both considerable interest and considerable disagreement. Thus far, however, there has been little attempt to characterize people's lay theories about happiness or explore their consequences. We examined whether individual differences in lay theories of happiness would predict empathy. In Studies 1a and 1b, we validated the Lay Theories of Happiness Scale (LTHS), which includes three dimensions: flexibility, controllability, and locus. In Study 2, higher dispositional empathy was predicted by the belief that happiness is flexible, controllable, and internal. In Studies 3 and 4, higher empathy toward a specific target was predicted by the belief that happiness is flexible, uncontrollable, and external In conjunction, Studies 2, 3, and 4 provide evidence that trait and state empathy are separable and can have opposing relationships with people's lay theories. Overall, these findings highlight generalized beliefs that may guide empathic reactions to the unhappiness of others. © 2016 by the Society for Personality and Social Psychology, Inc.

Comprehensive long distance and real-time pipeline monitoring system based on fiber optic sensing

Energy Technology Data Exchange (ETDEWEB)

Nikles, Marc; Ravet, Fabien; Briffod, Fabien [Omnisens S.A., Morges (Switzerland)

2009-07-01

An increasing number of pipelines are constructed in remote regions affected by harsh environmental conditions. These pipeline routes often cross mountain areas which are characterized by unstable grounds and where soil texture changes between winter and summer increase the probability of hazards. Due to the long distances to be monitored and the linear nature of pipelines, distributed fiber optic sensing techniques offer significant advantages and the capability to detect and localize pipeline disturbance with great precision. Furthermore pipeline owner/operators lay fiber optic cable parallel to transmission pipelines for telecommunication purposes and at minimum additional cost monitoring capabilities can be added to the communication system. The Brillouin-based Omnisens DITEST monitoring system has been used in several long distance pipeline projects. The technique is capable of measuring strain and temperature over 100's kilometers with meter spatial resolution. Dedicated fiber optic cables have been developed for continuous strain and temperature monitoring and their deployment along the pipeline has enabled permanent and continuous pipeline ground movement, intrusion and leak detection. This paper presents a description of the fiber optic Brillouin-based DITEST sensing technique, its measurement performance and limits, while addressing future perspectives for pipeline monitoring. (author)

Lay responder naloxone access and Good Samaritan law compliance: postcard survey results from 20 Indiana counties.

Science.gov (United States)

Watson, Dennis P; Ray, Bradley; Robison, Lisa; Huynh, Philip; Sightes, Emily; Walker, La Shea; Brucker, Krista; Duwve, Joan

2018-04-06

To reduce fatal drug overdoses, two approaches many states have followed is to pass laws expanding naloxone access and Good Samaritan protections for lay persons with high likelihood to respond to an opioid overdose. Most prior research has examined attitudes and knowledge among lay responders in large metropolitan areas who actively use illicit substances. The present study addresses current gaps in knowledge related to this issue through an analysis of data collected from a broader group of lay responders who received naloxone kits from 20 local health departments across Indiana. Postcard surveys were included inside naloxone kits distributed in 20 Indiana counties, for which 217 returned cards indicated the person completing it was a lay responder. The survey captured demographic information and experiences with overdose, including the use of 911 and knowledge about Good Samaritan protections. Few respondents had administered naloxone before, but approximately one third had witnessed a prior overdose and the majority knew someone who had died from one. Those who knew someone who had overdosed were more likely to have obtained naloxone for someone other than themselves. Also, persons with knowledge of Good Samaritan protections or who had previously used naloxone were significantly more likely to have indicated calling 911 at the scene of a previously witnessed overdose. Primary reasons for not calling 911 included fear of the police and the person who overdosed waking up on their own. Knowing someone who has had a fatal or non-fatal overdose appears to be a strong motivating factor for obtaining naloxone. Clarifying and strengthening Good Samaritan protections, educating lay persons about these protections, and working to improve police interactions with the public when they are called to an overdose scene are likely to improve implementation and outcomes of naloxone distribution and opioid-related Good Samaritan laws.

Designing the fiber volume ratio in SiC fiber-reinforced SiC ceramic composites under Hertzian stress

International Nuclear Information System (INIS)

Lee, Kee Sung; Jang, Kyung Soon; Park, Jae Hong; Kim, Tae Woo; Han, In Sub; Woo, Sang Kuk

2011-01-01

Highlights: → Optimum fiber volume ratios in the SiC/SiC composite layers were designed under Hertzian stress. → FEM analysis and spherical indentation experiments were undertaken. → Boron nitride-pyrocarbon double coatings on the SiC fiber were effective. → Fiber volume ratio should be designed against flexural stress. -- Abstract: Finite element method (FEM) analysis and experimental studies are undertaken on the design of the fiber volume ratio in silicon carbide (SiC) fiber-reinforced SiC composites under indentation contact stresses. Boron nitride (BN)/Pyrocarbon (PyC) are selected as the coating materials for the SiC fiber. Various SiC matrix/coating/fiber/coating/matrix structures are modeled by introducing a woven fiber layer in the SiC matrix. Especially, this study attempts to find the optimum fiber volume ratio in SiC fiber-reinforced SiC ceramics under Hertzian stress. The analysis is performed by changing the fiber type, fiber volume ratio, coating material, number of coating layers, and stacking sequence of the coating layers. The variation in the stress for composites in relation to the fiber volume ratio in the contact axial or radial direction is also analyzed. The same structures are fabricated experimentally by a hot process, and the mechanical behaviors regarding the load-displacement are evaluated using the Hertzian indentation method. Various SiC matrix/coating/fiber/coating/matrix structures are fabricated, and mechanical characterization is performed by changing the coating layer, according to the introduction (or omission) of the coating layer, and the number of woven fiber mats. The results show that the damage mode changes from Hertzian stress to flexural stress as the fiber volume ratio increases in composites because of the decreased matrix volume fraction, which intensifies the radial crack damage. The result significantly indicates that the optimum fiber volume ratio in SiC fiber-reinforced SiC ceramics should be designed for

Lay theories of smoking and young adult nonsmokers' and smokers' smoking expectations.

Science.gov (United States)

Fitz, Caroline C; Kaufman, Annette; Moore, Philip J

2015-04-01

This study investigated the relationship between lay theories of cigarette smoking and expectations to smoke. An incremental lay theory of smoking entails the belief that smoking behavior can change; an entity theory entails the belief that smoking behavior cannot change. Undergraduate nonsmokers and smokers completed a survey that assessed lay theories of smoking and smoking expectations. Results demonstrated that lay theories of smoking were differentially associated with smoking expectations for nonsmokers and smokers: stronger incremental beliefs were associated with greater expectations of trying smoking for nonsmokers but lower expectations of becoming a regular smoker for smokers. Implications for interventions are discussed. © The Author(s) 2013.

Upgrading offshore pipelines concrete coated by silica fume additive against aggressive mechanical laying

OpenAIRE

M.I. Abdou; Hesham Abuseda

2016-01-01

Studies have been carried out to investigate the possibility of utilizing a broad range of micro-silica partial additions with cement in the production of concrete coating. This study investigated the strength properties and permeability of micro-silica concrete to achieve resistance toward concrete cracking and damage during laying. The chemical composition of micro-silica (silica fume) was determined, and has been conducted on concrete mixes with additions of 3 up to 25% by weight of cement...

Analytical verification of requirements for safe and timely lay-down of ...

African Journals Online (AJOL)

Analytical verification of requirements for safe and timely lay-down of an offshore slay pipeline abandonment head during some pipe-lay stops: a case study of Forcados Yokri integrated pipeline project in Nigerian shallow offshore.

Phosphorus requirement in laying hens

NARCIS (Netherlands)

Lambert, W.; Krimpen, van M.M.; Star, L.

2014-01-01

It was hypothesized that P supply by feed in alternative housing systems can be lowered without negative effects on bone quality and production performance. Therefore, the objectives of the current study were 1) to update the retainable phosphorus (rP) needs of two modern laying hen breeds from 36

Evaluation of a well-established task-shifting initiative: the lay counselor cadre in Botswana.

Science.gov (United States)

Ledikwe, Jenny H; Kejelepula, Mable; Maupo, Kabelo; Sebetso, Siwulani; Thekiso, Mothwana; Smith, Monica; Mbayi, Bagele; Houghton, Nankie; Thankane, Kabo; O'Malley, Gabrielle; Semo, Bazghina-Werq

2013-01-01

Evidence supports the implementation of task shifting to address health worker shortages that are common in resource-limited settings. However, there is need to learn from established programs to identify ways to achieve the strongest, most sustainable impact. This study examined the Botswana lay counselor cadre, a task shifting initiative, to explore effectiveness and contribution to the health workforce. This evaluation used multiple methods, including a desk review, a national lay counselor survey (n = 385; response = 94%), in-depth interviews (n = 79), lay counselors focus group discussions (n = 7), lay counselors observations (n = 25), and client exit interviews (n = 47). Interview and focus group data indicate that lay counselors contribute to essentially all HIV-related programs in Botswana and they conduct the majority of HIV tests and related counseling at public health facilities throughout the country. Interviews showed that the lay counselor cadre is making the workload of more skilled health workers more manageable and increasing HIV acceptance in communities. The average score on a work-related knowledge test was 74.5%. However for 3 questions, less than half answered correctly. During observations, lay counselors demonstrated average competence for most skills assessed and clients (97.9%) were satisfied with services received. From the survey, lay counselors generally reported being comfortable with their duties; however, some reported clinical duties that extended beyond their training and mandate. Multiple factors affecting the performance of the lay counselors were identified, including insufficient resources, such as private counseling space and HIV test kits; and technical, administrative, and supervisory support. Lay counselors are fulfilling an important role in Botswana's healthcare system, serving as the entry point into HIV care, support, and treatment services. For this and other similar task shifting initiatives

Stretchable Fiber Supercapacitors with High Volumetric Performance Based on Buckled MnO2 /Oxidized Carbon Nanotube Fiber Electrodes.

Science.gov (United States)

Li, Mingyang; Zu, Mei; Yu, Jinshan; Cheng, Haifeng; Li, Qingwen

2017-03-01

A stretchable fiber supercapacitor (SC) based on buckled MnO 2 /oxidized carbon nanotube (CNT) fiber electrode is fabricated by a simple prestraining-then-buckling method. The prepared stretchable fiber SC has a specific volumetric capacitance up to 409.4 F cm -3 , which is 33 times that of the pristine CNT fiber based SC, and shows the outstanding stability and repeatability in performance as a stretchable SC. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Performance and economy of production of laying hens fed graded ...

African Journals Online (AJOL)

Experiments were carried out to evaluate the performance of laying hens fed fermented wild cocoyam corm (FWCC) as a partial replacement for maize. Two hundred and forty (240) Nera black laying birds were randomly allocated to four experimental diets formulated on 0, 10, 20 and 30% FWCC as graded replacement ...

Effects of lay support for pregnant women with social risk factors on infant development and maternal psychological health at 12 months postpartum.

Directory of Open Access Journals (Sweden)

Emma Popo

Full Text Available The ELSIPS (Evaluation of Lay Support in Pregnant Women with Social Risk RCT showed that lay support for women with social risk had a positive effect on maternal mental health and mother-infant bonding. This exploratory study examined whether these observed benefits would impact infant development at 1 year.A sub-sample of women whose infants were under one year who had participated in the ELSIPS RCT which randomised women to receive either standard care or the services of a Pregnancy Outreach Worker (POW, and who were contactable, were eligible to participate in the follow up. At home visits, the Bayley Scales of Infant Development (3rd Edition and standardised measures of depression, self efficacy, mind-mindedness and bonding were completed.486 women were eligible for follow up, of whom 154 agreed to participate. 61/273 were successfully followed up in the standard maternity care arm and 51/213 in the POW arm. Women who completed follow up were less depressed and had higher selfefficacy scores at 8-12 weeks postpartum than those who did not complete follow up. There were no significant differences in maternal outcomes, infant cognitive development, receptive communication, expressive communication, fine motor development or social/emotional functioning between groups at 12 month follow up. Infants of mothers who received the POW intervention had significantly better gross motor development than infants whose mothers received standard care (p<0.03.The provision of lay support to women with social risk may facilitate infant gross motor skill development at one year but there were no other demonstrable benefits. The effects of the intervention may be underestimated given that those women who completed follow up had better mental health than the original study sample.Controlled-Trials.com ISRCTN35027323.

Effects of lay support for pregnant women with social risk factors on infant development and maternal psychological health at 12 months postpartum.

Science.gov (United States)

Popo, Emma; Kenyon, Sara; Dann, Sophie-Anna; MacArthur, Christine; Blissett, Jacqueline

2017-01-01

The ELSIPS (Evaluation of Lay Support in Pregnant Women with Social Risk) RCT showed that lay support for women with social risk had a positive effect on maternal mental health and mother-infant bonding. This exploratory study examined whether these observed benefits would impact infant development at 1 year. A sub-sample of women whose infants were under one year who had participated in the ELSIPS RCT which randomised women to receive either standard care or the services of a Pregnancy Outreach Worker (POW), and who were contactable, were eligible to participate in the follow up. At home visits, the Bayley Scales of Infant Development (3rd Edition) and standardised measures of depression, self efficacy, mind-mindedness and bonding were completed. 486 women were eligible for follow up, of whom 154 agreed to participate. 61/273 were successfully followed up in the standard maternity care arm and 51/213 in the POW arm. Women who completed follow up were less depressed and had higher selfefficacy scores at 8-12 weeks postpartum than those who did not complete follow up. There were no significant differences in maternal outcomes, infant cognitive development, receptive communication, expressive communication, fine motor development or social/emotional functioning between groups at 12 month follow up. Infants of mothers who received the POW intervention had significantly better gross motor development than infants whose mothers received standard care (p<0.03). The provision of lay support to women with social risk may facilitate infant gross motor skill development at one year but there were no other demonstrable benefits. The effects of the intervention may be underestimated given that those women who completed follow up had better mental health than the original study sample. Controlled-Trials.com ISRCTN35027323.

Assessment of the minimal available phosphorus needs of laying hens: Implications for phosphorus management strategies.

Science.gov (United States)

Jing, M; Zhao, S; Rogiewicz, A; Slominski, B A; House, J D

2018-03-28

The oversupply of dietary phosphorus (P) leads to increased feed costs and discharge of excessive P to the environment, thus directly impacting the sustainability of egg production practices. The present study was conducted to better define the minimal available P needs of laying hens. Fifty-six Lohmann white laying hens were individually caged and fed one of 7 diets with graded levels of available P (0.15, 0.20, 0.25, 0.30, 0.35, 0.40, or 0.45%) for 12 weeks. Records were maintained for body weight, feed intake, and egg production during the experimental period. Blood and egg samples were collected and digestibility studies conducted at wk 6 and 12 of the experiment. At the end of the experiment, tibia characteristics and expression of the P transporters in the small intestine and kidney were determined. Lowering dietary available P from 0.45 to 0.15% generally reduced plasma P concentrations (P data indicate that reducing dietary available P up to 0.15% is adequate to maintain health and performance of layers. As such, this minimal available P estimate should serve as a benchmark for the assessment of P contents of commercial laying hen rations, with the goal of enhancing the sustainability of egg production.

Activating lay health influencers to promote tobacco cessation.

Science.gov (United States)

Muramoto, Myra L; Hall, John R; Nichter, Mark; Nichter, Mimi; Aickin, Mikel; Connolly, Tim; Matthews, Eva; Campbell, Jean Z; Lando, Harry A

2014-05-01

To evaluate the effect of tobacco cessation brief-intervention (BI) training for lay "health influencers," on knowledge, self-efficacy and the proportion of participants reporting BI delivery post-training. Randomized, community-based study comparing In-person or Web-based training, with mailed materials. In-person and Web-training groups had significant post-training cessation knowledge and self-efficacy gains. All groups increased the proportion of individuals reporting BIs at follow-up, with no significant between-group differences. Irrespective of participants' prior intervention experience, 80%-86% reported BIs within the past 90 days; 71%-79% reported >1 in the past 30. Web and In-person training significantly increase health influencer cessation knowledge and self-efficacy. With minimal prompting and materials, even persons without BI experience can be activated to encourage tobacco cessation.

The emotional wellbeing of lay HIV counselling and testing counsellors.

Science.gov (United States)

Visser, Maretha; Mabota, Princess

2015-01-01

The HIV testing, treatment and care programme of the South African public healthcare system depends on HIV counselling and testing (HCT) that is primarily delivered by lay counsellors. Lay counsellors are expected to educate clients about HIV/AIDS, advocate behaviour change, convey test results and support those infected and affected to cope with the emotional and social challenges associated with HIV/AIDS. This research focuses on the emotional wellbeing of lay HCT counsellors because this influences the quality of services they provide. A mixed methods approach was used. The emotional wellbeing, level of burnout, depression and coping style of 50 lay HCT counsellors working at the City of Tshwane clinics were assessed. Additionally, five focus group discussions were conducted. The results showed that HCT counsellors reported average emotional wellbeing, high levels of emotional exhaustion and depression. They had a sense of personal accomplishment and positive coping skills. The results revealed that they may have difficulty dealing with clients' emotional distress without adequate training and supervision. This creates a dilemma for service delivery. In the light of the important role they play in service delivery, the role of the lay HCT counsellor needs to be reconsidered. HCT should develop as a profession with specific training and supervision to develop their emotional competencies to conduct effective counselling sessions.

Lay Definitions of Happiness across Nations: The Primacy of Inner Harmony and Relational Connectedness

Science.gov (United States)

Delle Fave, Antonella; Brdar, Ingrid; Wissing, Marié P.; Araujo, Ulisses; Castro Solano, Alejandro; Freire, Teresa; Hernández-Pozo, María Del Rocío; Jose, Paul; Martos, Tamás; Nafstad, Hilde E.; Nakamura, Jeanne; Singh, Kamlesh; Soosai-Nathan, Lawrence

2016-01-01

In well-being research the term happiness is often used as synonymous with life satisfaction. However, little is known about lay people's understanding of happiness. Building on the available literature, this study explored lay definitions of happiness across nations and cultural dimensions, analyzing their components and relationship with participants' demographic features. Participants were 2799 adults (age range = 30–60, 50% women) living in urban areas of Argentina, Brazil, Croatia, Hungary, India, Italy, Mexico, New Zealand, Norway, Portugal, South Africa, and United States. They completed the Eudaimonic and Hedonic Happiness Investigation (EHHI), reporting, among other information, their own definition of happiness. Answers comprised definitions referring to a broad range of life domains, covering both the contextual-social sphere and the psychological sphere. Across countries and with little variation by age and gender, inner harmony predominated among psychological definitions, and family and social relationships among contextual definitions. Whereas relationships are widely acknowledged as basic happiness components, inner harmony is substantially neglected. Nevertheless, its cross-national primacy, together with relations, is consistent with the view of an ontological interconnectedness characterizing living systems, shared by several conceptual frameworks across disciplines and cultures. At the methodological level, these findings suggest the potential of a bottom-up, mixed method approach to contextualize psychological dimensions within culture and lay understanding. PMID:26858677

Caloric restriction induces energy-sparing alterations in skeletal muscle contraction, fiber composition and local thyroid hormone metabolism that persist during catch-up fat upon refeeding

Directory of Open Access Journals (Sweden)

Paula Bresciani M. De Andrade

2015-09-01

Full Text Available Weight regain after caloric restriction results in accelerated fat storage in adipose tissue. This catch-up fat phenomenon is postulated to result partly from suppressed skeletal muscle thermogenesis, but the underlying mechanisms are elusive. We investigated whether the reduced rate of skeletal muscle contraction-relaxation cycle that occurs after caloric restriction persists during weight recovery and could contribute to catch-up fat. Using a rat model of semistarvation-refeeding, in which fat recovery is driven by suppressed thermogenesis, we show that contraction and relaxation of leg muscles are slower after both semistarvation and refeeding. These effects are associated with (i higher expression of muscle deiodinase type 3 (DIO3 which inactivates tri-iodothyronine (T3, and lower expression of T3-activating enzyme, deiodinase type 2 (DIO2, (ii slower net formation of T3 from its T4 precursor in muscles, and (iii accumulation of slow fibers at the expense of fast fibers. These semistarvation-induced changes persisted during recovery and correlated with impaired expression of transcription factors involved in slow-twitch muscle development.We conclude that diminished muscle thermogenesis following caloric restriction results from reduced muscle T3 levels, alteration in muscle-specific transcription factors, and fast-to-slow fiber shift causing slower contractility. Energy-sparing effects persist during weight recovery and likely contribute to catch-up fat.

Caloric restriction induces energy-sparing alterations in skeletal muscle contraction, fiber composition and local thyroid hormone metabolism that persist during catch-up fat upon refeeding.

Science.gov (United States)

De Andrade, Paula B M; Neff, Laurence A; Strosova, Miriam K; Arsenijevic, Denis; Patthey-Vuadens, Ophélie; Scapozza, Leonardo; Montani, Jean-Pierre; Ruegg, Urs T; Dulloo, Abdul G; Dorchies, Olivier M

2015-01-01

Weight regain after caloric restriction results in accelerated fat storage in adipose tissue. This catch-up fat phenomenon is postulated to result partly from suppressed skeletal muscle thermogenesis, but the underlying mechanisms are elusive. We investigated whether the reduced rate of skeletal muscle contraction-relaxation cycle that occurs after caloric restriction persists during weight recovery and could contribute to catch-up fat. Using a rat model of semistarvation-refeeding, in which fat recovery is driven by suppressed thermogenesis, we show that contraction and relaxation of leg muscles are slower after both semistarvation and refeeding. These effects are associated with (i) higher expression of muscle deiodinase type 3 (DIO3), which inactivates tri-iodothyronine (T3), and lower expression of T3-activating enzyme, deiodinase type 2 (DIO2), (ii) slower net formation of T3 from its T4 precursor in muscles, and (iii) accumulation of slow fibers at the expense of fast fibers. These semistarvation-induced changes persisted during recovery and correlated with impaired expression of transcription factors involved in slow-twitch muscle development. We conclude that diminished muscle thermogenesis following caloric restriction results from reduced muscle T3 levels, alteration in muscle-specific transcription factors, and fast-to-slow fiber shift causing slower contractility. These energy-sparing effects persist during weight recovery and contribute to catch-up fat.

Haematology and serum biochemistry of laying hens fed red pepper ...

African Journals Online (AJOL)

The hematology and serum biochemistry of ISA brown laying hens fed red pepper (Capsicum annum. L.) as feed additive in their diet was studied. Sixty (60) laying birds (in their 32nd week) were randomly allotted to four different dietary treatments with graded levels of red pepper (Capsicum annum. L.) as additive.

Formation of amyloid fibers by monomeric light chain variable domains.

Science.gov (United States)

Brumshtein, Boris; Esswein, Shannon R; Landau, Meytal; Ryan, Christopher M; Whitelegge, Julian P; Phillips, Martin L; Cascio, Duilio; Sawaya, Michael R; Eisenberg, David S

2014-10-03

Systemic light chain amyloidosis is a lethal disease characterized by excess immunoglobulin light chains and light chain fragments composed of variable domains, which aggregate into amyloid fibers. These fibers accumulate and damage organs. Some light chains induce formation of amyloid fibers, whereas others do not, making it unclear what distinguishes amyloid formers from non-formers. One mechanism by which sequence variation may reduce propensity to form amyloid fibers is by shifting the equilibrium toward an amyloid-resistant quaternary structure. Here we identify the monomeric form of the Mcg immunoglobulin light chain variable domain as the quaternary unit required for amyloid fiber assembly. Dimers of Mcg variable domains remain stable and soluble, yet become prone to assemble into amyloid fibers upon disassociation into monomers. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

Experimental research of UWB over fiber system employing 128-QAM and ISFA-optimized scheme

Science.gov (United States)

He, Jing; Xiang, Changqing; Long, Fengting; Chen, Zuo

2018-05-01

In this paper, an optimized intra-symbol frequency-domain averaging (ISFA) scheme is proposed and experimentally demonstrated in intensity-modulation and direct-detection (IMDD) multiband orthogonal frequency division multiplexing (MB-OFDM) ultra-wideband over fiber (UWBoF) system. According to the channel responses of three MB-OFDM UWB sub-bands, the optimal ISFA window size for each sub-band is investigated. After 60-km standard single mode fiber (SSMF) transmission, the experimental results show that, at the bit error rate (BER) of 3.8 × 10-3, the receiver sensitivity of 128-quadrature amplitude modulation (QAM) can be improved by 1.9 dB using the proposed enhanced ISFA combined with training sequence (TS)-based channel estimation scheme, compared with the conventional TS-based channel estimation. Moreover, the spectral efficiency (SE) is up to 5.39 bit/s/Hz.

Hollow fiber liquid supported membranes

International Nuclear Information System (INIS)

Violante, V.

1987-01-01

The hollow fiber system are well known and developed in the scientific literature because of their applicability in the process separation units. The authors approach to a mathematical model for a particular hollow fiber system, usin liquid membranes. The model has been developed in order to obtain a suitable tool for a sensitivy analysis and for a scaling-up. This kind of investigation is very usefull from an engineering point of view, to get a spread range of information to build up a pilot plant from the laboratory scale

On strength design using free material subjected to multiple load cases

DEFF Research Database (Denmark)

Pedersen, Pauli; Pedersen, Niels Leergaard

2013-01-01

Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together with a prac......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...

Enhanced terahertz magnetic dipole response by subwavelength fiber

Directory of Open Access Journals (Sweden)

Shaghik Atakaramians

2018-05-01

Full Text Available Dielectric sub-wavelength particles have opened up a new platform for realization of magnetic light. Recently, we have demonstrated that a dipole emitter by a sub-wavelength fiber leads to an enhanced magnetic response. Here, we experimentally demonstrate an enhanced magnetic dipole source in the terahertz frequency range. By placing the fiber next to the hole in a metal screen, we find that the radiation power can be enhanced more than one order of magnitude. The enhancement is due to the excitation of the Mie-type resonances in the fiber. We demonstrate that such a system is equivalent to a double-fiber system excited by a magnetic source. This coupled magnetic dipole and optical fiber system can be considered a unit cell of metasurfaces for manipulation of terahertz radiation and is a proof-of-concept of a possibility to achieve enhanced radiation of a dipole source in proximity of a sub-wavelength fiber. It can also be scaled down to optical frequencies opening up promising avenues for developing integrated nanophotonic devices such as nanoantennas or lasers on fibers.

Carbon-fiber composite molecular sieves for gas separation

Energy Technology Data Exchange (ETDEWEB)

Jagtoyen, M.; Derbyshire, F. [Univ. of Kentucky, Lexington, KY (United States)

1996-08-01

This report describes continuing work on the activation and characterization of formed carbon fiber composites. The composites are produced at the Oak Ridge National Laboratory (ORNL) and activated at the Center for Applied Energy Research (CAER) using steam, CO{sub 2}, or O{sub 2} at different conditions of temperature and time, and with different furnace configurations. The general aims of the project are to produce uniformly activated samples with controlled pore structures for specialist applications such as gas separation and water treatment. In previous work the authors reported that composites produced from isotropic pitch fibers weighing up to 25g can be uniformly activated through the appropriate choice of reaction conditions and furnace configurations. They have now succeeded in uniformly activating composites of dimensions up to 12 x 7 x 6 cm, or up to about 166 gram - a scale-up factor of about six. Part of the work has involved the installation of a new furnace that can accommodate larger composites. Efforts were made to achieve uniform activation in both steam and CO{sub 2}. The authors have also succeeded in producing materials with very uniform and narrow pore size distributions by using a novel method involving low temperature oxygen chemisorption in combination with heat treatment in N{sub 2} at high temperatures. Work has also started on the activation of PAN based carbon fibers and fiber composites with the aim of producing composites with wide pore structures for use as catalyst supports. So far activation of the PAN fiber composites supplied by ORNL has been difficult which is attributed to the low reactivity of the PAN fibers. As a result, studies are now being made of the activation of the PAN fibers to investigate the optimum carbonization and activation conditions for PAN based fibers.

Lay off: the experience of women and men in Iceland's financial sector.

Science.gov (United States)

Snorradóttir, Asta; Rafnsdottir, Gudbjörg Linda; Tómasson, Kristinn; Vilhjálmsson, Rúnar

2014-01-01

To analyze gender differences in levels of psychological distress, financial strain, lay off experiences and job search activity among unemployed and re-employed individuals who were laid-off due to the collapse of the financial sector in Iceland in 2008. The study is based on questionnaires distributed to 759 former financial sector employees; 426 responses were received giving a 62.6% response rate. The groups of unemployed and re-employed woman and men are compared using separate multivariate binary models to control for mediating factors. The analysis reveals gender differences in demographic factors and jobs held prior to lay-off. More women than men were psychologically or finically distressed and claimed being shocked by the lay-off. A higher proportion of men than women were re-employed at the time of this study. The main difference between those re-employed and unemployed was lower financial strain among those re-employed for both men and women in this sample. The study does not support the traditional view of men having more difficulties in the lay-off process than women. This calls for a rethinking regarding gender in lay-off and unemployment. A gender-based analysis is needed when considering the ramifications of losing a job and job search activity in the lay-off process.

On-fiber 3D printing of photonic crystal fiber tapers for mode field diameter conversion

KAUST Repository

Bertoncini, Andrea; Rajamanickam, Vijayakumar Palanisamy; Liberale, Carlo

2017-01-01

The large mismatch between the Mode Field Diameter (MFD) of conventional single-mode fibers (SMFs) and the MFD of highly nonlinear Photonic Crystal Fibers (PCFs), that can be down to 1.5 μm, or Large Mode Area PCF, that can be up to 25 μm, would require a substantial fiber mode size rescaling in order to allow an efficient direct coupling between PCFs and SMFs. Over the years different solutions have been proposed, as fiber splicing of SMF to PCF. However these procedures are not straightforward, as they involve developing special splicing recipes, and can affect PCF optical properties at the splice interface [1].

On-fiber 3D printing of photonic crystal fiber tapers for mode field diameter conversion

KAUST Repository

Bertoncini, Andrea

2017-11-02

The large mismatch between the Mode Field Diameter (MFD) of conventional single-mode fibers (SMFs) and the MFD of highly nonlinear Photonic Crystal Fibers (PCFs), that can be down to 1.5 μm, or Large Mode Area PCF, that can be up to 25 μm, would require a substantial fiber mode size rescaling in order to allow an efficient direct coupling between PCFs and SMFs. Over the years different solutions have been proposed, as fiber splicing of SMF to PCF. However these procedures are not straightforward, as they involve developing special splicing recipes, and can affect PCF optical properties at the splice interface [1].

CO2-laser-assisted processing of glass fiber-reinforced thermoplastic composites

Science.gov (United States)

Brecher, Christian; Emonts, Michael; Schares, Richard Ludwig; Stimpfl, Joffrey

2013-02-01

To fully exploit the potential of fiber-reinforced thermoplastic composites (FRTC) and to achieve a broad industrial application, automated manufacturing systems are crucial. Investigations at Fraunhofer IPT have proven that the use of laser system technology in processing FRTC allows to achieve high throughput, quality, flexibility, reproducibility and out-of-autoclave processing simultaneously. As 90% of the FRP in Europe1 are glass fiber-reinforced a high impact can be achieved by introducing laser-assisted processing with all its benefits to glass fiber-reinforced thermoplastics (GFRTC). Fraunhofer IPT has developed the diode laser-assisted tape placement (laying and winding) to process carbon fiber-reinforced thermoplastic composites (CFRTC) for years. However, this technology cannot be transferred unchanged to process milky transparent GFRTC prepregs (preimpregnated fibers). Due to the short wavelength (approx. 980 nm) and therefore high transmission less than 20% of the diode laser energy is absorbed as heat into non-colored GFRTC prepregs. Hence, the use of a different wave length, e.g. CO2-laser (10.6 μm) with more than 90% laser absorption, is required to allow the full potential of laser-assisted processing of GFRTC. Also the absorption of CO2-laser radiation at the surface compared to volume absorption of diode laser radiation is beneficial for the interlaminar joining of GFRTC. Fraunhofer IPT is currently developing and investigating the CO2-laser-assisted tape placement including new system, beam guiding, process and monitoring technology to enable a resource and energy efficient mass production of GFRP composites, e.g. pipes, tanks, masts. The successful processing of non-colored glass fiber-reinforced Polypropylene (PP) and Polyphenylene Sulfide (PPS) has already been proven.

In search of the cancer candidate: can lay epidemiology help?

Science.gov (United States)

Macdonald, Sara; Watt, Graham; Macleod, Una

2013-05-01

First published in 1991, the ideas embedded in 'Lay epidemiology and the prevention paradox' offered a novel and rational explanation for the lay public's failure to fully engage with the lifestyle messages offered by health educators. During the course of a large ethnographic study in South Wales, Davison and colleagues described the emergence of what they termed the coronary candidate. Candidacy provides a 'cultural mechanism' that facilitates the estimation of risk for coronary heart disease. The model has rarely been applied to other major illnesses. This article presents findings from a study that sought to explore the lay epidemiology model, candidacy and cancer. In a series of in-depth individual interviews, members of the lay public discussed their ideas about cancer, and what emerged was an explanatory hierarchy to account for cancer events. Yet the random and unpredictable nature of cancer was emphasised as well as a general reluctance to accept the idea of cancer candidacy. © 2012 The Authors. Sociology of Health & Illness © 2012 Foundation for the Sociology of Health & Illness/Blackwell Publishing Ltd.

Matted-fiber divertor tagets for sputter resistance

International Nuclear Information System (INIS)

Gierszewski, P.J.; Todreas, N.E.; Mikic, B.; Yang, T.F.

1981-06-01

Reductions in net sputtering yields can be obtained by altering the surface topography to maximize redeposition of sputtered atoms. A simple analysis is used to indicate a potential reduction by a factor of 2 to 5 for matted fiber divertor targets, relatively independent of incident, reflected and sputtered atom distributions. The fiber temperature is also shown to be acceptable, even up to 10 MW/m 2 , for reasonably combinations of materials, fiber diameter and fiber spacing

Fiber-optic anemometer based on single-walled carbon nanotube coated tilted fiber Bragg grating.

Science.gov (United States)

Zhang, Yang; Wang, Fang; Liu, Zigeng; Duan, Zhihui; Cui, Wenli; Han, Jie; Gu, Yiying; Wu, Zhenlin; Jing, Zhenguo; Sun, Changsen; Peng, Wei

2017-10-02

In this work, a novel and simple optical fiber hot-wire anemometer based on single-walled carbon nanotubes (SWCNTs) coated tilted fiber Bragg grating (TFBG) is proposed and demonstrated. For the hot-wire wind speed sensor design, TFBG is an ideal in-fiber sensing structure due to its unique features. It is utilized as both light coupling and temperature sensing element without using any geometry-modified or uncommon fiber, which simplifies the sensor structure. To further enhance the thermal conversion capability, SWCNTs are coated on the surface of the TFBG instead of traditional metallic materials, which have excellent thermal characteristics. When a laser light is pumped into the sensor, the pump light propagating in the core will be easily coupled into cladding of the fiber via the TFBG and strongly absorbed by the SWCNTs thin film. This absorption acts like a hot-wire raising the local temperature of the fiber, which is accurately detected by the TFBG resonance shift. In the experiments, the sensor's performances were investigated and controlled by adjusting the inherent angle of the TFBG, the thickness of SWCNTs film, and the input power of the pump laser. It was demonstrated that the developed anemometer exhibited significant light absorption efficiency up to 93%, and the maximum temperature of the local area on the fiber was heated up to 146.1°C under the relatively low pump power of 97.76 mW. The sensitivity of -0.3667 nm/(m/s) at wind speed of 1.0 m/s was measured with the selected 12° TFBG and 1.6 μm film.

Simulation of Glass Fiber Forming Processes

DEFF Research Database (Denmark)

Von der Ohe, Renate

Two glass fiber forming processes have been simulated using FEM, which are the drawing of continuous glass fibers for reinforcement purposes and the spinning of discontinuous glass fibers - stone wool for insulation. The aim of this work was to set up a numerical model for each process, and to use...... this model in finding relationships between the production conditions and the resulting fiber properties. For both processes, a free surface with large deformation and radiative and convective heat transfer must be taken into account. The continuous fiber drawing has been simulated successfully......, and parametric studies have been made. Several properties that characterize the process have been calculated, and the relationship between the fictive temperature and the cooling rate of the fibers has been found. The model for the discontinuous fiber spinning was brought to the limits of the commercial code...

Processing and Mechanical Properties of Macro Polyamide Fiber Reinforced Concrete.

Science.gov (United States)

Jeon, Joong Kyu; Kim, WooSeok; Jeon, Chan Ki; Kim, Jin Cheol

2014-11-26

This study developed a macro-sized polyamide (PA) fiber for concrete reinforcement and investigated the influence of the PA fiber on flexural responses in accordance with ASTM standards. PA fibers are advantageous compared to steel fibers that are corrosive and gravitated. The macro-sized PA fiber significantly improved concrete ductility and toughness. Unlike steel fibers, the PA fibers produced two peak bending strengths. The first-peaks occurred near 0.005 mm of deflection and decreased up to 0.5 mm of deflection. Then the bending strength increased up to second-peaks until the deflections reached between 1.0 and 1.5 mm. The averaged flexural responses revealed that PA fiber content did not significantly influence flexural responses before L /600, but had significant influence thereafter. Toughness performance levels were also determined, and the results indicated more than Level II at L /600 and Level IV at others.

Lay Worker Health Literacy: A Concept Analysis and Operational Definition.

Science.gov (United States)

Cadman, Kathleen Paco

2017-10-01

The concept of lay worker health literacy is created by concurrently analyzing and synthesizing two intersecting concepts, lay workers and health literacy. Articulation of this unique intersection is the result of implementing a simplified Wilson's Concept Analysis Procedure. This process incorporates the following components: a) selecting a concept, b) determining the aims/purposes of analysis, c) identifying all uses of the concept, d) determining defining attributes, e) identifying a model case, f) identifying borderline, related, contrary, and illegitimate cases, g) identifying antecedents and consequences, and h) defining empirical referents. Furthermore, as current literature provides no operational definition for lay worker health literacy, one is created to contribute cohesion to the concept. © 2017 Wiley Periodicals, Inc.

The Involvement of the Lay Faithful in Consecratio Mundi

Directory of Open Access Journals (Sweden)

Elżbieta Osewska

2017-11-01

Full Text Available The term consecratio mundi , despite its introduction to theology already before the Second Vatican Council, still sparks a lot of discussion and controversy. In this article we will address the issue of the sanctification of the world by lay people in accordance with the Church teaching. First, consecratio mundi will be presented as a specific mission of the lay faithful, then the article will present the basic planes of their involvement.

All-optical fiber compressor

International Nuclear Information System (INIS)

Ivanov, Luben M.

2015-01-01

A simple all-optical fiber compressor, based on an idea of dispersion management using a fiber of positive dispersion in the first part and of negative dispersion in the second one at the working wavelength, is investigated. The method allows a combination of the advantages of the classic fiber-grating and of the multisoliton compression. It is possible to improve substantially the quality of the compressed pulse compared to the multisoliton compression. The compression factor could be increased up to 2-2.5 times when the fraction of the input pulse energy appearing within the compressed pulse enhances more than 2 times. Thus, the peak power of the compressed pulse is able to increase about 5 times and the quality of the obtained pulses should be comparable with those obtained by the fiber-grating compressor

Ceramic silicon-boron-carbon fibers from organic silicon-boron-polymers

Science.gov (United States)

Riccitiello, Salvatore R. (Inventor); Hsu, Ming-Ta S. (Inventor); Chen, Timothy S. (Inventor)

1993-01-01

Novel high strength ceramic fibers derived from boron, silicon, and carbon organic precursor polymers are discussed. The ceramic fibers are thermally stable up to and beyond 1200 C in air. The method of preparation of the boron-silicon-carbon fibers from a low oxygen content organosilicon boron precursor polymer of the general formula Si(R2)BR(sup 1) includes melt-spinning, crosslinking, and pyrolysis. Specifically, the crosslinked (or cured) precursor organic polymer fibers do not melt or deform during pyrolysis to form the silicon-boron-carbon ceramic fiber. These novel silicon-boron-carbon ceramic fibers are useful in high temperature applications because they retain tensile and other properties up to 1200 C, from 1200 to 1300 C, and in some cases higher than 1300 C.

Mechanical Testing of Polymeric Composites for Aircraft Applications: Standards, Requirements and Limitations

Science.gov (United States)

Chinchan, Levon; Shevtsov, Sergey; Soloviev, Arcady; Shevtsova, Varvara; Huang, Jiun-Ping

The high-loaded parts of modern aircrafts and helicopters are often produced from polymeric composite materials. Such materials consist of reinforcing fibers, packed by layers with the different angles, and resin, which uniformly distributes the structural stresses between fibers. These composites should have an orthotropic symmetry of mechanical properties to obtain the desirable spatial distribution of elastic moduli consistent to the external loading pattern. Main requirements to the aircraft composite materials are the specified elastic properties (9 for orthotropic composite), long-term strength parameters, high resistance against the environmental influences, low thermal expansion to maintain the shape stability. These properties are ensured by an exact implementation of technological conditions and many testing procedures performed with the fibers, resin, prepregs and ready components. Most important mechanical testing procedures are defined by ASTM, SACMA and other standards. However in each case the wide diversity of components (dimensions and lay-up of fibers, rheological properties of thermosetting resins) requires a specific approach to the sample preparation, testing, and numerical processing of the testing results to obtain the veritable values of tested parameters. We pay the special attention to the cases where the tested specimens are cut not from the plates recommended by standards, but from the ready part manufactured with the specific lay-up, tension forces on the reinforcing fiber at the filament winding, and curing schedule. These tests can provide most useful information both for the composite structural design and to estimate a quality of the ready parts. We consider an influence of relation between specimen dimensions and pattern of the fibers winding (or lay-up) on the results of mechanical testing for determination of longitudinal, transverse and in-plane shear moduli, an original numerical scheme for reconstruction of in-plane shear

Reactions and coping strategies in lay rescuers who have provided CPR to out-of-hospital cardiac arrest victims: a qualitative study.

Science.gov (United States)

Mathiesen, Wenche Torunn; Bjørshol, Conrad Arnfinn; Braut, Geir Sverre; Søreide, Eldar

2016-05-25

Cardiopulmonary resuscitation (CPR) provided by community citizens is of paramount importance for out-of-hospital cardiac arrest (OHCA) victims' survival. Fortunately, CPR rates by community citizens seem to be rising. However, the experience of providing CPR is rarely investigated. The aim of this study was to explore reactions and coping strategies in lay rescuers who have provided CPR to OHCA victims. This is a qualitative study of 20 lay rescuers who have provided CPR to 18 OHCA victims. We used a semistructured interview guide focusing on their experiences after providing CPR. The study was conducted in the Stavanger region of Norway, an area with very high bystander CPR rates. Three themes emerged from the interview analysis: concern, uncertainty and coping strategies. Providing CPR had been emotionally challenging for all lay rescuers and, for some, had consequences in terms of family and work life. Several lay rescuers experienced persistent mental recurrences of the OHCA incident and had concerns about the outcome for the cardiac arrest victim. Unknown or fatal outcomes often caused feelings of guilt and were particularly difficult to handle. Several reported the need to be acknowledged for their CPR attempts. Health-educated lay rescuers seemed to be less affected than others. A common coping strategy was confiding in close relations, preferably the health educated. However, some required professional help to cope with the OHCA incident. Lay rescuers experience emotional and social challenges, and some struggle to cope in life after providing CPR in OHCA incidents. Experiencing a positive patient outcome and being a health-educated lay rescuer seem to mitigate concerns. Common coping strategies are attempts to reduce uncertainty towards patient outcome and own CPR quality. Further studies are needed to determine whether an organised professional follow-up can mitigate the concerns and uncertainty of lay rescuers. Published by the BMJ Publishing Group

Lay involvement in the analysis of qualitative data in health services research: a descriptive study.

Science.gov (United States)

Garfield, S; Jheeta, S; Husson, F; Jacklin, A; Bischler, A; Norton, C; Franklin, B D

2016-01-01

There is a consensus that patients and the public should be involved in research in a meaningful way. However, to date, lay people have been mostly involved in developing research ideas and commenting on patient information.We previously published a paper describing our experience with lay partners conducting observations in a study of how patients in hospital are involved with their medicines. In a later part of the same study, lay partners were also involved in analysing interviews that a researcher had conducted with patients, carers and healthcare professionals about patient and carer involvement with medicines in hospital. We therefore wanted to build on our previous paper and report on our experiences with lay partners helping to conduct data analysis. We therefore interviewed the lay members and researchers involved in the analysis to find out their views.Both lay members and researchers reported that lay partners added value to the study by bringing their own perspectives and identifying further areas for the researcher to look for in the interviews. In this way researchers and lay partners were able to work together to produce a richer analysis than would have been possible from either alone. Background It is recognised that involving lay people in research in a meaningful rather than tokenistic way is both important and challenging. In this paper, we contribute to this debate by describing our experiences of lay involvement in data analysis. Methods We conducted semi-structured interviews with the lay partners and researchers involved in qualitative data analysis in a wider study of inpatient involvement in medication safety. The interviews were transcribed verbatim and coded using open thematic analysis. Results We interviewed three lay partners and the three researchers involved. These interviews demonstrated that the lay members added value to the analysis by bringing their own perspectives; these were systematically integrated into the analysis by the

Tunable and switchable multi-wavelength erbium-doped fiber laser with highly nonlinear photonic crystal fiber and polarization controllers

International Nuclear Information System (INIS)

Liu, X M; Lin, A; Zhao, W; Lu, K Q; Wang, Y S; Zhang, T Y; Chung, Y

2008-01-01

We have proposed a novel multi-wavelength erbium-doped fiber laser by using two polarization controllers and a sampled chirped fiber Bragg grating(SC-FBG). On the assistance of SC-FBG, the proposed fiber lasers with excellent stability and uniformity are tunable and switchable by adjusting the polarization controllers. Our laser can stably lase two waves and up to eight waves simultaneously at room temperature

Performance of Lightweight Natural-Fiber Reinforced Concrete

Directory of Open Access Journals (Sweden)

Hardjasaputra Harianto

2017-01-01

Full Text Available Concrete, the most common construction material, has negligible tension capacity. However, a reinforcement material such as natural fibers, can be used to improve the tensile properties of concrete. This paper presents experiments conducted on Super Lightweight Concrete mixed with coconut fibers (SLNFRC. Coconut fibers are regarded as one of the toughest natural fibers to strengthen concrete. Coconut fiber reinforced composites have been considered as a sustainable construction material because the fibers are derived from waste. These wastes, which are available in large quantities in Asia, have to be extracted from the husk of coconut fruits and must pass a mechanical process before being added to a concrete mixture. The Super Lightweight Concrete was made by mixing concrete paste with foam agent that can reduce the overall weight of concrete up to 60% with compressive strength up to 6 MPa. The Super Lightweight Concrete is intended to be used for non-structural walls, as alternative conventional construction materials such as brick walls. The influence of coconut fibers content in increasing the flexural tensile strength of Super Lightweight Concrete was studied in this research. The fiber content studied include 0%, 0.1%, 0.175%, and 0.25% by weight of cement content. Sixteen specimens of SLNFRC mini beams of 60 mm x 60 mm x 300 mm were tested to failure to investigate their flexural strengths. The optimum percent fibers yielding higher tensile strength was found to be 0.175%

[The recent development of fiber-optic chemical sensor].

Science.gov (United States)

Wang, Jian; Wei, Jian-ping; Yang, Bo; Gao, Zhi-yang; Zhang, Li-wei; Yang, Xue-feng

2014-08-01

The present article provides a brief review of recent research on fiber-optic chemical sensor technology and the future development trends. Especially, fiber-optic pH chemical sensor, fiber-optic ion chemicl sensor, and fiber-optic gas chemical sensor are introduced respectively. Sensing film preparation methods such as chemical bonding method and sol-gel method were briefly reviewed. The emergence of new type fiber-microstructured optical fiber opened up a new development direction for fiber-optic chemical sensor. Because of its large inner surface area, flexible design of structure, having internal sensing places in fibers, it has rapidly become an important development direction and research focus of the fiber-optic chemical sensors. The fiber-optic chemical sensor derived from microstructured optical fiber is also discussed in detail. Finally, we look to the future of the fiber-optic chemical sensor.

Optical Fiber Protection

Science.gov (United States)

1999-01-01

F&S Inc. developed and commercialized fiber optic and microelectromechanical systems- (MEMS) based instrumentation for harsh environments encountered in the aerospace industry. The NASA SBIR programs have provided F&S the funds and the technology to develop ruggedized coatings and coating techniques that are applied during the optical fiber draw process. The F&S optical fiber fabrication facility and developed coating methods enable F&S to manufacture specialty optical fiber with custom designed refractive index profiles and protective or active coatings. F&S has demonstrated sputtered coatings using metals and ceramics and combinations of each, and has also developed techniques to apply thin coatings of specialized polyimides formulated at NASA Langley Research Center. With these capabilities, F&S has produced cost-effective, reliable instrumentation and sensors capable of withstanding temperatures up to 800? C and continues building commercial sales with corporate partners and private funding. More recently, F&S has adapted the same sensing platforms to provide the rapid detection and identification of chemical and biological agents

Modulation-instability biosensing using an As2S3 chalcogenide tapered fiber

DEFF Research Database (Denmark)

Markos, Christos; Bang, Ole

2016-01-01

We demonstrate an experimentally feasible biosensor design based on As2S3 chalcogenide tapered fiber. Pumping the fiber close to 1064 nm, a record sensitivity up to ~18 nm/nm was predicted.......We demonstrate an experimentally feasible biosensor design based on As2S3 chalcogenide tapered fiber. Pumping the fiber close to 1064 nm, a record sensitivity up to ~18 nm/nm was predicted....

Safety evaluation of zinc methionine in laying hens: Effects on laying performance, clinical blood parameters, organ development, and histopathology.

Science.gov (United States)

Chen, N N; Liu, B; Xiong, P W; Guo, Y; He, J N; Hou, C C; Ma, L X; Yu, D Y

2018-04-01

The study was conducted to investigate whether high-dose zinc methionine (Zn-Met) affected the safety of laying hens, including laying performance, hematological parameters, serum chemical parameters, organ index, and histopathology. A total of 540 20-week-old Hy-Line White laying hens was randomly allocated to 6 groups with 6 replicates of 15 birds each. Birds were fed diets supplemented with 0 (control), 70, 140, 350, 700, or 1,400 mg Zn/kg diet as Zn-Met. The experiment lasted for 8 wk after a 2-week acclimation period. Results showed that dietary supplementation with 70 or 140 mg Zn/kg diet as Zn-Met significantly increased average daily egg mass (ADEM), laying rate (LR), and feed conversion ratio (FCR) (P hens fed with 0, 350, or 700 mg Zn/kg as Zn-Met (P > 0.05); hens administered 1,400 mg Zn/kg showed a significant increase in BSER and remarkable decreases in ADEM, LR, and FCR (P hens receiving 0, 70, 140, 350, or 700 mg Zn/kg as Zn-Met in serum chemical parameters (P > 0.05); supplementation with 1,400 mg Zn/kg as Zn-Met remarkably elevated the concentrations of serum total bilirubin (TBILI), glucose (GLU), uric acid (UA), and creatinine (CRE) (P hens administered 0, 70, 140, 350, or 700 mg Zn/kg as Zn-Met, while significant histological lesions were observed in the heart, liver, lung, and kidney tissues of hens receiving 1,400 mg Zn/kg as Zn-Met. No significant differences were detected in hematological parameters or organ index (P > 0.05). In conclusion, a nominal Zn concentration of 700 mg/kg as Zn-Met is considered to be no-observed-adverse-effect level following daily administration to hens for 56 days.

Infectious Bronchitis Vaccination Protocols for Laying Hens

Directory of Open Access Journals (Sweden)

A. Sulaiman

2011-12-01

Full Text Available A research was conducted to investigate the effects of vaccination protocols for Infectious Bronchitis (IB on egg production, egg quality, and IB antibody titres of laying hens. Different initial vaccination (Control, VicS eye, VicS spray, VicS water, A3 eye, A3 spray, and A3 water for IB were administered to day-old Isa Brown hens. Half the hens were revaccinated regularly during lay whereas the other hens were not vaccinated. Results showed that initial vaccination treatment had significant effects on hen day egg production and egg quality of egg weight, shell reflectivity, shell breaking strength, shell thickness, albumen height, Haugh Units, and IB antibody titre levels, but had no effect on percentage of shell and yolk colour. Egg weight and shell reflectivity were less favourable in the control hens. In contrast, shell breaking strength and shell thickness were highest for the group that initially received A3 vaccine in water. However, regular revaccination had some deleterious effects on egg production and egg quality. There were no significant effects of revaccination on IB antibody titres. It is concluded that there was little advantage in regularly revaccinating laying hens for IB virus, since they had received appropriate initial vaccination.

Lay persons alerted by mobile application system initiate earlier cardio-pulmonary resuscitation: A comparison with SMS-based system notification.

Science.gov (United States)

Caputo, Maria Luce; Muschietti, Sandro; Burkart, Roman; Benvenuti, Claudio; Conte, Giulio; Regoli, François; Mauri, Romano; Klersy, Catherine; Moccetti, Tiziano; Auricchio, Angelo

2017-05-01

We compared the time to initiation of cardiopulmonary resuscitation (CPR) by lay responders and/or first responders alerted either via Short Message Service (SMS) or by using a mobile application-based alert system (APP). The Ticino Registry of Cardiac Arrest collects all data about out-of-hospital cardiac arrests (OHCAs) occurring in the Canton of Ticino. At the time of a bystander's call, the EMS dispatcher sends one ambulance and alerts the first-responders network made up of police officers or fire brigade equipped with an automatic external defibrillator, the so called "traditional" first responders, and - if the scene was considered safe - lay responders as well. We evaluated the time from call to arrival of traditional first responders and/or lay responders when alerted either via SMS or the new developed mobile APP. Over the study period 593 OHCAs have occurred. Notification to the first responders network was sent via SMS in 198 cases and via mobile APP in 134 cases. Median time to first responder/lay responder arrival on scene was significantly reduced by the APP-based system (3.5 [2.8-5.2]) compared to the SMS-based system (5.6 [4.2-8.5] min, p 0.0001). The proportion of lay responders arriving first on the scene significantly increased (70% vs. 15%, play responder determined a higher survival rate. The mobile APP system is highly efficient in the recruitment of first responders, significantly reducing the time to the initiation of CPR thus increasing survival rates. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Diet shifts during egg laying: Implications for measuring contaminants in bird eggs

Energy Technology Data Exchange (ETDEWEB)

Morrissey, Christy A. [Catchment Research Group, School of Biosciences, Cardiff University, Cardiff CF10 3AX (United Kingdom); Elliott, John E. [Pacific Wildlife Research Centre, Environment Canada, 5421 Robertson Road, Delta, British Columbia V4K 3N2 (Canada); Ormerod, Stephen J., E-mail: ormerod@cf.ac.u [Catchment Research Group, School of Biosciences, Cardiff University, Cardiff CF10 3AX (United Kingdom)

2010-02-15

We combined stable isotope tracers of blood plasma, blood cells and egg contents with faecal analysis during pre-breeding and egg laying phases in two dipper species Cinclus cinclus and Cinclus mexicanus to determine the occurrence of dietary shifts during egg production and to assess consequences for egg contaminant loads. In both species, changes in delta{sup 13}C (C. cinclus) or delta{sup 15}N (C. mexicanus) in female plasma relative to red blood cells indicated a dietary shift during laying that was not observed in males. Eurasian dippers increased prey consumption as breeding approached, shifting from primarily trichopteran insect larvae to ephemeropterans and plecopterans. In American dippers, egg-laying females switched to feeding at a higher trophic level by consuming more fish. Eggs derived from higher trophic level diets contained more mercury (American dipper), polychlorinated biphenyls and some organochlorines, especially DDT metabolites. The results demonstrate how dietary changes during egg laying accompany the demands for egg production with consequences for contaminant deposition in avian eggs. - Changes in laying diet influences contaminant deposition in bird eggs.

Diet shifts during egg laying: Implications for measuring contaminants in bird eggs

International Nuclear Information System (INIS)

Morrissey, Christy A.; Elliott, John E.; Ormerod, Stephen J.

2010-01-01

We combined stable isotope tracers of blood plasma, blood cells and egg contents with faecal analysis during pre-breeding and egg laying phases in two dipper species Cinclus cinclus and Cinclus mexicanus to determine the occurrence of dietary shifts during egg production and to assess consequences for egg contaminant loads. In both species, changes in δ 13 C (C. cinclus) or δ 15 N (C. mexicanus) in female plasma relative to red blood cells indicated a dietary shift during laying that was not observed in males. Eurasian dippers increased prey consumption as breeding approached, shifting from primarily trichopteran insect larvae to ephemeropterans and plecopterans. In American dippers, egg-laying females switched to feeding at a higher trophic level by consuming more fish. Eggs derived from higher trophic level diets contained more mercury (American dipper), polychlorinated biphenyls and some organochlorines, especially DDT metabolites. The results demonstrate how dietary changes during egg laying accompany the demands for egg production with consequences for contaminant deposition in avian eggs. - Changes in laying diet influences contaminant deposition in bird eggs.

Mixed crude glycerin in laying hen diets: live performance and egg quality and fatty acid profile

Directory of Open Access Journals (Sweden)

CRA Duarte

2014-12-01

Full Text Available This study evaluated the performance and the quality and fatty acid profile of eggs from laying hens fed diets containing mixed crude glycerin (MCG; 80% vegetable fat + 20% animal fat. A total of 240 39-week-old Hy-Line W36 laying hens were distributed according to a completely randomized experimental design into six treatments consisting of graded MCG dietary inclusion levels (0, 1.5, 3.0, 4.5, 6.0, and 7.5%, with five replicates of eight birds each. Feed intake linearly decreased (p<0.05 with increasing MCG inclusion levels. The percentages of myristic, palmitic, and α-linolenic acids in the eggs linearly decreased as MCG dietary levels increased (p<0.05, while α-linoleic acid, polyunsaturated fatty acids (PUFA and ω-6/ω-3 ratio linearly increased. Excreta moisture linearly increased with increasing levels of MCG inclusion (p<0.05. MCG may be included in up to 7.5% in layer feeds without impairing performance or egg quality, but levels up to 5.54% reduce SFA egg content. However, the inclusion of MCG in layer diets increases ω-6/ω-3 ratio in the eggs.

Microring embedded hollow polymer fiber laser

Energy Technology Data Exchange (ETDEWEB)

Linslal, C. L., E-mail: linslal@gmail.com; Sebastian, S.; Mathew, S.; Radhakrishnan, P.; Nampoori, V. P. N.; Girijavallabhan, C. P.; Kailasnath, M. [International School of Photonics, Cochin University of Science and Technology, Cochin 22 (India)

2015-03-30

Strongly modulated laser emission has been observed from rhodamine B doped microring resonator embedded in a hollow polymer optical fiber by transverse optical pumping. The microring resonator is fabricated on the inner wall of a hollow polymer fiber. Highly sharp lasing lines, strong mode selection, and a collimated laser beam are observed from the fiber. Nearly single mode lasing with a side mode suppression ratio of up to 11.8 dB is obtained from the strongly modulated lasing spectrum. The microring embedded hollow polymer fiber laser has shown efficient lasing characteristics even at a propagation length of 1.5 m.

Experimental and Numerical Studies on Fiber Deformation and Formability in Thermoforming Process Using a Fast-Cure Carbon Prepreg: Effect of Stacking Sequence and Mold Geometry

Directory of Open Access Journals (Sweden)

Daeryeong Bae

2018-05-01

Full Text Available A fast-cure carbon fiber/epoxy prepreg was thermoformed against a replicated automotive roof panel mold (square-cup to investigate the effect of the stacking sequence of prepreg layers with unidirectional and plane woven fabrics and mold geometry with different drawing angles and depths on the fiber deformation and formability of the prepreg. The optimum forming condition was determined via analysis of the material properties of epoxy resin. The non-linear mechanical properties of prepreg at the deformation modes of inter- and intra-ply shear, tensile and bending were measured to be used as input data for the commercial virtual forming simulation software. The prepreg with a stacking sequence containing the plain-woven carbon prepreg on the outer layer of the laminate was successfully thermoformed against a mold with a depth of 20 mm and a tilting angle of 110°. Experimental results for the shear deformations at each corner of the thermoformed square-cup product were compared with the simulation and a similarity in the overall tendency of the shear angle in the path at each corner was observed. The results are expected to contribute to the optimization of parameters on materials, mold design and processing in the thermoforming mass-production process for manufacturing high quality automotive parts with a square-cup geometry.

Experimental and Numerical Studies on Fiber Deformation and Formability in Thermoforming Process Using a Fast-Cure Carbon Prepreg: Effect of Stacking Sequence and Mold Geometry

Science.gov (United States)

Bae, Daeryeong; Kim, Shino; Lee, Wonoh; Yi, Jin Woo; Um, Moon Kwang; Seong, Dong Gi

2018-01-01

A fast-cure carbon fiber/epoxy prepreg was thermoformed against a replicated automotive roof panel mold (square-cup) to investigate the effect of the stacking sequence of prepreg layers with unidirectional and plane woven fabrics and mold geometry with different drawing angles and depths on the fiber deformation and formability of the prepreg. The optimum forming condition was determined via analysis of the material properties of epoxy resin. The non-linear mechanical properties of prepreg at the deformation modes of inter- and intra-ply shear, tensile and bending were measured to be used as input data for the commercial virtual forming simulation software. The prepreg with a stacking sequence containing the plain-woven carbon prepreg on the outer layer of the laminate was successfully thermoformed against a mold with a depth of 20 mm and a tilting angle of 110°. Experimental results for the shear deformations at each corner of the thermoformed square-cup product were compared with the simulation and a similarity in the overall tendency of the shear angle in the path at each corner was observed. The results are expected to contribute to the optimization of parameters on materials, mold design and processing in the thermoforming mass-production process for manufacturing high quality automotive parts with a square-cup geometry. PMID:29883413

Radiation cured coatings for fiber optics

International Nuclear Information System (INIS)

Ketley, A.D.; Morgan, C.R.

1978-01-01

A continuous protective coating is formed on a fiber optic by coating the fiber optic in a bath of a liquid radiation curable composition at a temperature up to 90 0 C and exposing the coated conductor to ultraviolet or high energy ionizing radiation to cure the coating

Non-synaptic signaling from cerebellar climbing fibers modulates Golgi cell activity.

Science.gov (United States)

Nietz, Angela K; Vaden, Jada H; Coddington, Luke T; Overstreet-Wadiche, Linda; Wadiche, Jacques I

2017-10-13

Golgi cells are the principal inhibitory neurons at the input stage of the cerebellum, providing feedforward and feedback inhibition through mossy fiber and parallel fiber synapses. In vivo studies have shown that Golgi cell activity is regulated by climbing fiber stimulation, yet there is little functional or anatomical evidence for synapses between climbing fibers and Golgi cells. Here, we show that glutamate released from climbing fibers activates ionotropic and metabotropic receptors on Golgi cells through spillover-mediated transmission. The interplay of excitatory and inhibitory conductances provides flexible control over Golgi cell spiking, allowing either excitation or a biphasic sequence of excitation and inhibition following single climbing fiber stimulation. Together with prior studies of spillover transmission to molecular layer interneurons, these results reveal that climbing fibers exert control over inhibition at both the input and output layers of the cerebellar cortex.

Toward a compact fibered squeezing parametric source.

Science.gov (United States)

Brieussel, Alexandre; Ott, Konstantin; Joos, Maxime; Treps, Nicolas; Fabre, Claude

2018-03-15

In this work, we investigate three different compact fibered systems generating vacuum squeezing that involve optical cavities limited by the end surface of a fiber and by a curved mirror and containing a thin parametric crystal. These systems have the advantage to couple squeezed states directly to a fiber, allowing the user to benefit from the flexibility of fibers in the use of squeezing. Three types of fibers are investigated: standard single-mode fibers, photonic-crystal large-mode-area single-mode fibers, and short multimode fibers taped to a single-mode fiber. The observed squeezing is modest (-0.56  dB, -0.9  dB, -1  dB), but these experiments open the way for miniaturized squeezing devices that could be a very interesting advantage in scaling up quantum systems for quantum processing, opening new perspectives in the domain of integrated quantum optics.

Effects of stock density on the laying performance, blood parameter, corticosterone, litter quality, gas emission and bone mineral density of laying hens in floor pens

Science.gov (United States)

Kang, H. K.; Park, S. B.; Kim, S. H.; Kim, C. H.

2016-01-01

The effects of stocking density on the performance, egg quality, leukocyte concentration, blood biochemistry, corticosterone levels, bone mineral density, and noxious gas emission of laying hens were investigated. Eight hundred 34-week-old Hy-Line Brown laying hens (Gallus gallus domesticus) were randomly assigned to one of 4 treatments, each of which was replicated 4 times. Four stocking densities, including 5, 6, 7, and 10 birds/m2, were compared. A commercial-type basal diet was formulated to meet or exceed nutrient recommendations for laying hens from the National Research Council. The diet was fed to the hens ad libitum for 8 wk. Results indicated that hen-day egg production, egg mass, and feed intake were less for (P hens. PMID:27578881

Crash worthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force

International Nuclear Information System (INIS)

Paruka, Perowansa; Siswanto, Waluyo Adi; Maleque, Md Abdul; Shah, Mohd Kamal Mohd

2015-01-01

A combination of aluminum columnar member with composite laminate to form a hybrid structure can be used as collapsible energy absorbers especially in automotive vehicular structures to protect occupants and cargo. A key advantage of aluminum member in composite is that it provides ductile and stable plastic collapse mechanisms with progressive deformation in a stable manner by increasing energy absorption during collision. This paper presents an experimental investigation on the influence of the number of hybrid epoxy glass layers in overwrap composite columnar tubes. Three columnar tube specimens were used and fabricated by hand lay-up method. Aluminum square hollow shape was combined with externally wrapped by using an isophthalic epoxy resin reinforced with glass fiber skin with an orientation angle of 0 .deg. /90 .deg. The aluminum columnar tube was used as reference material. Crushed hybrid-composite columnar tubes were prepared using one, two, and three layers to determine the crash worthy capacity. Quasi-static crush test was conducted using INSTRON machine with an axial loading. Results showed that crush force and the number of layers were related to the enhancement of energy absorption before the collapse of columnar tubes. The energy absorption properties of the crushed hybrid-composite columnar tubes improved significantly with the addition of layers in the overwrap. Microscopic analysis on the modes of epoxy-glass fiber laminate failure was conducted by using scanning electron microscopy.

Crash worthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force

Energy Technology Data Exchange (ETDEWEB)

Paruka, Perowansa [Jalan Politeknik, Kota Kinabalu (Malaysia); Siswanto, Waluyo Adi [Universiti Tun Hussein Onn Malaysia, Parit Raja (Malaysia); Maleque, Md Abdul [Universiti Islam Antarabangsa Malaysia, Kuala Lumpur (Malaysia); Shah, Mohd Kamal Mohd [Universiti Malaysia Sabah, Kota Kinabalu (Malaysia)

2015-05-15

A combination of aluminum columnar member with composite laminate to form a hybrid structure can be used as collapsible energy absorbers especially in automotive vehicular structures to protect occupants and cargo. A key advantage of aluminum member in composite is that it provides ductile and stable plastic collapse mechanisms with progressive deformation in a stable manner by increasing energy absorption during collision. This paper presents an experimental investigation on the influence of the number of hybrid epoxy glass layers in overwrap composite columnar tubes. Three columnar tube specimens were used and fabricated by hand lay-up method. Aluminum square hollow shape was combined with externally wrapped by using an isophthalic epoxy resin reinforced with glass fiber skin with an orientation angle of 0 .deg. /90 .deg. The aluminum columnar tube was used as reference material. Crushed hybrid-composite columnar tubes were prepared using one, two, and three layers to determine the crash worthy capacity. Quasi-static crush test was conducted using INSTRON machine with an axial loading. Results showed that crush force and the number of layers were related to the enhancement of energy absorption before the collapse of columnar tubes. The energy absorption properties of the crushed hybrid-composite columnar tubes improved significantly with the addition of layers in the overwrap. Microscopic analysis on the modes of epoxy-glass fiber laminate failure was conducted by using scanning electron microscopy.

Nonlinear fiber optics

CERN Document Server

Agrawal, Govind

2012-01-01

Since the 4e appeared, a fast evolution of the field has occurred. The 5e of this classic work provides an up-to-date account of the nonlinear phenomena occurring inside optical fibers, the basis of all our telecommunications infastructure as well as being used in the medical field. Reflecting the big developments in research, this new edition includes major new content: slow light effects, which offers a reduction in noise and power consumption and more ordered network traffic-stimulated Brillouin scattering; vectorial treatment of highly nonlinear fibers; and a brand new chapter o

Study of oil sorption behavior of filled and structured fiber assemblies made from polypropylene, kapok and milkweed fibers.

Science.gov (United States)

Rengasamy, R S; Das, Dipayan; Karan, C Praba

2011-02-15

This article reports on oil sorption behavior of fiber assemblies made up of single natural and synthetic fibers as well as blend of natural and synthetic fibers when tested with high density oil and diesel oil. A series of filled fiber assemblies were prepared from 100% polypropylene, kapok, and milkweed fibers and another series of bonded structured fiber assemblies were prepared from a 70/30 blend of kapok and polypropylene fibers and a 70/30 blend of milkweed and polypropylene fibers. It was observed that the porosity of the fiber assemblies played a very important role in determining its oil sorption capacity. The polypropylene fiber assembly exhibited the highest sorption capacity (g/g) followed by the kapok and milkweed fiber assemblies at porosity milkweed fibers have intra fiber porosities of 0.81 and 0.83, respectively. All the fiber assemblies showed higher oil sorption capacity with the high density oil as compared to the diesel oil. As the kapok and milkweed fiber have low cellulose content, hence their slow degradation is an advantage in fresh and marine water applications. The good sorption capacity of kapok and milkweed fiber assemblies along with their bio-degradable nature offer great scope for structuring them into fiber assemblies with large porosity and uniform pores to have efficient oil sorbents. Copyright © 2010 Elsevier B.V. All rights reserved.

Radiation effects on erbium doped optical fibers: on the influence of the fiber composition

International Nuclear Information System (INIS)

Tortech, B.

2008-01-01

We have studied the erbium-doped fibers (EDF) sensitivity under irradiation and the induced defects. The first chapter presents the state of the art for the EDF under irradiation as well as some radiation generated silica defects. The second chapter details the radiations used in this thesis and the experimental set-ups implemented for the characterization of the fiber responses under irradiation and the radiation induced defects. In the third chapter, we present the response of several erbium-doped fibers irradiated with γ-rays, protons and pulsed X-rays. The erbium doped fibers have higher radiation induced sensitivity than the Telecom fibers (SMF28) or than erbium-doped fibers containing little aluminum. The aluminum presence in the EDF core composition is mainly responsible for the fiber performance degradation. Whatever the irradiation types, the radiation generated defects are related to the host matrix. Our studies also display that the erbium ions are only affected by the interaction with the created defects. The fourth chapter deals with the EDF under UV exposure and shows that the UV rays lead to the same effects than the gamma rays. The last chapter of this thesis presents the study of optical fiber amplifiers under γ irradiation. (author)

Psychological impact on dispatched local lay rescuers performing bystander cardiopulmonary resuscitation.

Science.gov (United States)

Zijlstra, Jolande A; Beesems, Stefanie G; De Haan, Rob J; Koster, Rudolph W

2015-07-01

We studied the short-term psychological impact and post-traumatic stress disorder (PTSD)-related symptoms in lay rescuers performing cardiopulmonary resuscitation (CPR) after a text message (TM)-alert for out-of-hospital-cardiac arrest, and assessed which factors contribute to a higher level of PTSD-related symptoms. The lay rescuers received a TM-alert and simultaneously an email with a link to an online questionnaire. We analyzed all questionnaires from February 2013 until October 2014 measuring the short-term psychological impact. We interviewed by telephone all first arriving lay rescuers performing bystander CPR and assessed PTSD-related symptoms with the Impact of Event Scale (IES) 4-6 weeks after the resuscitation. IES-scores 0-8 reflected no stress, 9-25 mild, 26-43 moderate, and 44-75 severe stress. A score ≥ 26 indicated PTSD symptomatology. Of all alerted lay rescuers, 6572 completed the online questionnaire. Of these, 1955 responded to the alert and 507 assisted in the resuscitation. We interviewed 203 first arriving rescuers of whom 189 completed the IES. Of these, 41% perceived no/mild short-term impact, 46% bearable impact and 13% severe impact. On the IES, 81% scored no stress and 19% scored mild stress. None scored moderate or severe stress. Using a multivariable logistic regression model we identified three factors with an independent impact on mild stress level: no automated external defibrillator connected by the lay rescuer, severe short-term impact, and no (very) positive experience. Lay rescuers alerted by text messages, do not show PTSD-related symptoms 4-6 weeks after performing bystander CPR, even if they perceive severe short-term psychological impact. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Mid-infrared performance of single mode chalcogenide fibers

Science.gov (United States)

Cook, Justin; Sincore, Alex; Tan, Felix; El Halawany, Ahmed; Riggins, Anthony; Shah, Lawrence; Abouraddy, Ayman F.; Richardson, Martin C.; Schepler, Kenneth L.

2018-02-01

Due to the intrinsic absorption edge in silica near 2.4 μm, more exotic materials are required to transmit laser power in the IR such as fluoride or chalcogenide glasses (ChGs). In particular, ChG fibers offer broad IR transmission with low losses fibers at four different infrared wavelengths: 2053 nm, 2520 nm and 4550 nm. Polymer clad ChG fibers were drawn with 12.3 μm and 25 μm core diameters. Testing at 2053 nm was accomplished using a > 15 W, CW Tm:fiber laser. Power handling up to 10.2 W with single mode beam quality has been demonstrated, limited only by the available Tm:fiber output power. Anti-reflective coatings were successfully deposited on the ChG fiber facets, allowing up to 90.6% transmission with 12.2 MW/cm2 intensity on the facet. Single mode guidance at 4550 nm was also demonstrated using a quantum cascade laser (QCL). A custom optical system was constructed to efficiently couple the 0.8 NA QCL radiation into the 0.2 NA ChG fiber, allowing for a maximum of 78% overlap between the QCL radiation and fundamental mode of the fiber. With an AR-coated, 25 μm core diameter fiber, >50 mW transmission was demonstrated with > 87% transmission. Finally, we present results on fiber coupling from a free space Cr:ZnSe resonator at 2520 nm.

Scintillating Optical Fiber Imagers for biology

International Nuclear Information System (INIS)

Mastrippolito, R.

1990-01-01

S.O.F.I (Scintillating Optical Fiber Imager) is a detector developed to replace the autoradiographic films used in molecular biology for the location of radiolabelled ( 32 P) DNA molecules in blotting experiments. It analyses samples on a 25 x 25 cm 2 square area still 25 times faster than autoradiographic films, with a 1.75 and 3 mm resolution for two orthogonal directions. This device performs numerised images with a dynamic upper than 100 which allows the direct quantitation of the analysed samples. First, this thesis describes the S.O.F.I. development (Scintillating Optical Fibers, coding of these fibers and specific electronic for the treatment of the Multi-Anode Photo-Multiplier signals) and experiments made in collaboration with molecular biology laboratories. In a second place, we prove the feasibility of an automatic DNA sequencer issued from S.O.F.I [fr

Balanced PIN-TIA photoreceiver with integrated 3 dB fiber coupler for distributed fiber optic sensors

Science.gov (United States)

Datta, Shubhashish; Rajagopalan, Sruti; Lemke, Shaun; Joshi, Abhay

2014-06-01

We report a balanced PIN-TIA photoreceiver integrated with a 3 dB fiber coupler for distributed fiber optic sensors. This detector demonstrates -3 dB bandwidth >15 GHz and coupled conversion gain >65 V/W per photodiode through either input port of the 3 dB coupler, and can be operated at local oscillator power of +17 dBm. The combined common mode rejection of the balanced photoreceiver and the integrated 3 dB coupler is >20 dB. We also present measurement results with various optical stimuli, namely impulses, sinusoids, and pseudo-random sequences, which are relevant for time domain reflectometry, frequency domain reflectometry, and code correlation sensors, respectively.

Fiber tracking for brain tumor

International Nuclear Information System (INIS)

Yamada, Kei; Nakamura, Hisao; Ito, Hirotoshi; Tanaka, Osamu; Kubota, Takao; Yuen, Sachiko; Kizu, Osamu; Nishimura, Tsunehiko

2003-01-01

The purpose of this study was to validate an innovative scanning method for patients diagnosed with brain tumors. Using a 1.5 Tesla whole body magnetic resonance (MR) imager, 23 patients with brain tumors were scanned. The recorded data points of the diffusion-tensor imaging (DTI) sequences were 128 x 37 with the parallel imaging technique. The parallel imaging technique was equivalent to a true resolution of 128 x 74. The scan parameters were repetition time (TR)=6000, echo time (TE)=88, 6 averaging with a b-value of 800 s/mm 2 . The total scan time for DTI was 4 minutes and 24 seconds. DTI scans and subsequent fiber tracking were successfully applied in all cases. All fiber tracts on the contralesional side were visualized in the expected locations. Fiber tracts on the lesional side had varying degrees of displacement, disruption, or a combination of displacement and disruption due to the tumor. Tract disruption resulted from direct tumor involvement, compression upon the tract, and vasogenic edema surrounding the tumor. This DTI method using a parallel imaging technique allows for clinically feasible fiber tracking that can be incorporated into a routine MR examination. (author)

A Stretchable Alternating Current Electroluminescent Fiber

Directory of Open Access Journals (Sweden)

Dan Hu

2018-01-01

Full Text Available Flexible, stretchable electroluminescent fibers are of significance to meet the escalating requirements of increasing complexity and multifunctionality of smart electronics. We report a stretchable alternating current electroluminescent (ACEL fiber by a low-cost and all solution-processed scalable process. The ACEL fiber provides high stretchability, decent light-emitting performance, with excellent stability and nearly zero hysteresis. It can be stretched up to 80% strain. Our ACEL fiber device maintained a stable luminance for over 6000 stretch-release cycles at 50% strain. The mechanical stretchability and optical stability of our ACEL fiber device provides new possibilities towards next-generation stretchable displays, electronic textiles, advanced biomedical imaging and lighting, conformable visual readouts in arbitrary shapes, and novel health-monitoring devices.

Demonstration and Methodology of Structural Monitoring of Stringer Runs out Composite Areas by Embedded Optical Fiber Sensors and Connectors Integrated during Production in a Composite Plant.

Science.gov (United States)

Miguel Giraldo, Carlos; Zúñiga Sagredo, Juan; Sánchez Gómez, José; Corredera, Pedro

2017-07-21

Embedding optical fibers sensors into composite structures for Structural Health Monitoring purposes is not just one of the most attractive solutions contributing to smart structures, but also the optimum integration approach that insures maximum protection and integrity of the fibers. Nevertheless this intended integration level still remains an industrial challenge since today there is no mature integration process in composite plants matching all necessary requirements. This article describes the process developed to integrate optical fiber sensors in the Production cycle of a test specimen. The sensors, Bragg gratings, were integrated into the laminate during automatic tape lay-up and also by a secondary bonding process, both in the Airbus Composite Plant. The test specimen, completely representative of the root joint of the lower wing cover of a real aircraft, is comprised of a structural skin panel with the associated stringer run out. The ingress-egress was achieved through the precise design and integration of miniaturized optical connectors compatible with the manufacturing conditions and operational test requirements. After production, the specimen was trimmed, assembled and bolted to metallic plates to represent the real triform and buttstrap, and eventually installed into the structural test rig. The interrogation of the sensors proves the effectiveness of the integration process; the analysis of the strain results demonstrate the good correlation between fiber sensors and electrical gauges in those locations where they are installed nearby, and the curvature and load transfer analysis in the bolted stringer run out area enable demonstration of the consistency of the fiber sensors measurements. In conclusion, this work presents strong evidence of the performance of embedded optical sensors for structural health monitoring purposes, where in addition and most importantly, the fibers were integrated in a real production environment and the ingress

A Lay Ethics Quest for Technological Futures: About Tradition, Narrative and Decision-Making.

Science.gov (United States)

van der Burg, Simone

2016-01-01

Making better choices about future technologies that are being researched or developed is an important motivator behind lay ethics interventions. However, in practice, they do not always succeed to serve that goal. Especially authors who have noted that lay ethicists sometimes take recourse to well-known themes which stem from old, even 'archetypical' stories, have been criticized for making too little room for agency and decision-making in their approach. This paper aims to contribute to a reflection on how lay ethics can acquire more practical relevance. It will use resources in narrative ethics to suggest that in order to be relevant for action, facilitators of lay ethics interventions need to invite participants to engage in a narrative quest. As part of a quest, lay ethicists should be asked to (1) reflect on a specific question or choice, (2) use diverse (imaginative) input which is informative about the heterogeneity of viewpoints that are defended in society and (3) argue for their standpoints.

Free Material Design with Multiple Load Cases

DEFF Research Database (Denmark)

Pedersen, Pauli; Pedersen, Niels Leergaard

2012-01-01

Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together with a prac......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...... a more physical interpretation of the material constraint....

Nanomechanics of electrospun phospholipid fiber

Energy Technology Data Exchange (ETDEWEB)

Mendes, Ana C., E-mail: anac@food.dtu.dk, E-mail: ioach@food.dtu.dk; Chronakis, Ioannis S., E-mail: anac@food.dtu.dk, E-mail: ioach@food.dtu.dk [Technical University of Denmark, DTU-Food, Søltofts Plads B227, DK-2800, Kgs. Lyngby (Denmark); Nikogeorgos, Nikolaos; Lee, Seunghwan [Department of Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby (Denmark)

2015-06-01

Electrospun asolectin phospholipid fibers were prepared using isooctane as a solvent and had an average diameter of 6.1 ± 2.7 μm. Their mechanical properties were evaluated by nanoindentation using Atomic Force Microscopy, and their elastic modulus was found to be approximately 17.2 ± 1 MPa. At a cycle of piezo expansion-retraction (loading-unloading) of a silicon tip on a fiber, relatively high adhesion was observed during unloading. It is proposed that this was primarily due to molecular rearrangements at the utmost layers of the fiber caused by the indentation of the hydrophilic tip. The phospholipid fibers were shown to be stable in ambient conditions, preserving the modulus of elasticity up to 24 h.

Nanomechanics of electrospun phospholipid fiber

DEFF Research Database (Denmark)

Mendes, Ana Carina Loureiro; Nikogeorgos, Nikolaos; Lee, Seunghwan

2015-01-01

Electrospun asolectin phospholipid fibers were prepared using isooctane as a solvent and had an average diameter of 6.1 +/- 2.7 mu m. Their mechanical properties were evaluated by nanoindentation using Atomic Force Microscopy, and their elastic modulus was found to be approximately 17.2 +/- 1MPa....... At a cycle of piezo expansion-retraction (loading-unloading) of a silicon tip on a fiber, relatively high adhesion was observed during unloading. It is proposed that this was primarily due to molecular rearrangements at the utmost layers of the fiber caused by the indentation of the hydrophilic tip....... The phospholipid fibers were shown to be stable in ambient conditions, preserving the modulus of elasticity up to 24 h. (c) 2015 AIP Publishing LLC....

Side-emitting fiber optic position sensor

Science.gov (United States)

Weiss, Jonathan D [Albuquerque, NM

2008-02-12

A side-emitting fiber optic position sensor and method of determining an unknown position of an object by using the sensor. In one embodiment, a concentrated beam of light source illuminates the side of a side-emitting fiber optic at an unknown axial position along the fiber's length. Some of this side-illuminated light is in-scattered into the fiber and captured. As the captured light is guided down the fiber, its intensity decreases due to loss from side-emission away from the fiber and from bulk absorption within the fiber. By measuring the intensity of light emitted from one (or both) ends of the fiber with a photodetector(s), the axial position of the light source is determined by comparing the photodetector's signal to a calibrated response curve, look-up table, or by using a mathematical model. Alternatively, the side-emitting fiber is illuminated at one end, while a photodetector measures the intensity of light emitted from the side of the fiber, at an unknown position. As the photodetector moves further away from the illuminated end, the detector's signal strength decreases due to loss from side-emission and/or bulk absorption. As before, the detector's signal is correlated to a unique position along the fiber.

Long wavelength scintillators for fiber-optic applications

International Nuclear Information System (INIS)

Lyons, P.B.; Franks, L.; Lutz, S.; Flournoy, J.; Fullman, E.

1980-01-01

The use of fiber optics in plasma diagnostics has spurred the development of long wavelength scintillators with fast temporal characteristics. In this paper we describe several new liquid scintillator systems with fluorescent emissions maxima up to 730 nm. Subnanosecond scintillator FWHM response times have been obtained by the operation of liquid scintillators at elevated temperatures. Data on fiber system sensitivity versus fiber length and scintillator emission wavelength will be presented

Assessment of welfare and egg production of laying hens moravia ssl in small-scale breeding

Directory of Open Access Journals (Sweden)

Mária Angelovičová

2015-10-01

Full Text Available The purpose of this study was to investigate the welfare of laying hens Moravia SSL housed in small-scale hen house with free range, behavior, egg production and selected physical indicators of eggs and chemical indicators of egg mass. The laying hens were kept in a hen house on deep litter. Breeding facility of hen house was within the meaning of recommendation for applying the principles of welfare, i.e. the space and breeding facility within the meaning of enriched breeding environment. Stocking density of the laying hens corresponded with recommendations for unrestricted movement and implementing natural activities. The hen house was equipped with the perch, nest, feeder and drinker. The commercial feed mixture was used for feeding, which is intended for laying hens. The kitchen remains were added to feed mixture, as are wet bread, the non-edible remains of foodstuffs. A feed mixture was served to laying hens 825 g per day. The laying hens had free access to drinking water, grazing, ground pecking, ground scratching and dust-bathing and in the free range. We focused investigation of on the egg laying intensity, selected parameters of physical egg quality and chemical egg contents. Time to relax of laying hens was adjusted according to the summer and winter breeding seasons. The main activities of free-range hens are grazing, ground pecking, ground scratching and dust-bathing. The main activities of free-range hens are grazing, ground pecking, ground scratching and dust-bathing. These activities were investigated in laying hens too in dependent of year period, more in the summer. Housing of the hens was equipped with the perch. The laying hens regularly used a perch. A beginning of occupation the perch was at the time of time growing dark, at the end of the light day. A nesting material was selected regular, monthly exchange. It was meadow hay of excellent quality for the collection of high quality and safe eggs from nests in the hen house

25 CFR 11.205 - Are there standards for the appearance of attorneys and lay counselors?

Science.gov (United States)

2010-04-01

... lay counselors? 11.205 Section 11.205 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW...; Administration § 11.205 Are there standards for the appearance of attorneys and lay counselors? (a) No defendant... professional attorneys and lay counselors. ...

Understanding Lay Assessments of Alcohol Use Disorder: Need for Treatment and Associated Stigma.

Science.gov (United States)

Weine, Erienne R; Kim, Nancy S; Lincoln, Alisa K

2016-01-01

Three-quarters of people with an alcohol use disorder in the USA never receive treatment. Our understandings of who receives care are informed by sociological perspectives, theories and models, each of which discuss the role of lay people's understanding of illness. However, comparatively little work has been done to unpack the cognitive processes underlying lay assessment. In the context of the Framework Integrating Normative Influences on Stigma (FINIS), we aim to understand key factors guiding lay people's stigmatizing attitudes, perceptions and assessments of alcohol use disorder behaviors. Lay people read a vignette depicting a male or female adult with a diagnosable alcohol use disorder, along with either a causal life-event explanation for the alcohol use disorder behaviors or no explanation. They then made judgments of the need for treatment, psychological abnormality and the stigma they felt toward the person depicted. Causal life-event explanations decreased lay judgments of the need for treatment, psychological abnormality and stigma. The results suggest that the availability of a causal life-event explanation may have a complex effect on lay judgments, decreasing the likelihood of recommending treatment for alcohol use disorders, yet simultaneously reducing stigmatizing perceptions (and presumably social distance). © The Author 2015. Medical Council on Alcohol and Oxford University Press. All rights reserved.

Fiber optic vibration sensor using bifurcated plastic optical fiber

Science.gov (United States)

Abdullah, M.; Bidin, N.; Yasin, M.

2016-11-01

An extrinsic fiber optic vibration sensor is demonstrated for a fiber optic displacement sensor based on a bundled multimode fiber to measure a vibration frequency ranging from 100 until 3000 Hz. The front slope has a sensitivity of 0.1938mV/mm and linearity of 99.7% within a measurement range between 0.15-3.00 mm. By placing the diaphragm of the concave load-speaker within the linear range from the probe, the frequency of the vibration can be measured with error percentage of less than 1.54%. The graph of input against output frequency for low, medium and high frequency range show very high linearity up to 99%. Slope for low, medium, and high frequency range are calculated as 1.0026, 0.9934, and 1.0007 respectively. Simplicity, long term stability, low power consumption, wide dynamic and frequency ranges, noise reduction, ruggedness, linearity and light weight make it promising alternative to other well-establish methods for vibration frequency measurement.

Genome sequencing of the sweetpotato whitefly Bemisia tabaci MED/Q.

Science.gov (United States)

Xie, Wen; Chen, Chunhai; Yang, Zezhong; Guo, Litao; Yang, Xin; Wang, Dan; Chen, Ming; Huang, Jinqun; Wen, Yanan; Zeng, Yang; Liu, Yating; Xia, Jixing; Tian, Lixia; Cui, Hongying; Wu, Qingjun; Wang, Shaoli; Xu, Baoyun; Li, Xianchun; Tan, Xinqiu; Ghanim, Murad; Qiu, Baoli; Pan, Huipeng; Chu, Dong; Delatte, Helene; Maruthi, M N; Ge, Feng; Zhou, Xueping; Wang, Xiaowei; Wan, Fanghao; Du, Yuzhou; Luo, Chen; Yan, Fengming; Preisser, Evan L; Jiao, Xiaoguo; Coates, Brad S; Zhao, Jinyang; Gao, Qiang; Xia, Jinquan; Yin, Ye; Liu, Yong; Brown, Judith K; Zhou, Xuguo Joe; Zhang, Youjun

2017-05-01

The sweetpotato whitefly Bemisia tabaci is a highly destructive agricultural and ornamental crop pest. It damages host plants through both phloem feeding and vectoring plant pathogens. Introductions of B. tabaci are difficult to quarantine and eradicate because of its high reproductive rates, broad host plant range, and insecticide resistance. A total of 791 Gb of raw DNA sequence from whole genome shotgun sequencing, and 13 BAC pooling libraries were generated by Illumina sequencing using different combinations of mate-pair and pair-end libraries. Assembly gave a final genome with a scaffold N50 of 437 kb, and a total length of 658 Mb. Annotation of repetitive elements and coding regions resulted in 265.0 Mb TEs (40.3%) and 20 786 protein-coding genes with putative gene family expansions, respectively. Phylogenetic analysis based on orthologs across 14 arthropod taxa suggested that MED/Q is clustered into a hemipteran clade containing A. pisum and is a sister lineage to a clade containing both R. prolixus and N. lugens. Genome completeness, as estimated using the CEGMA and Benchmarking Universal Single-Copy Orthologs pipelines, reached 96% and 79%. These MED/Q genomic resources lay a foundation for future 'pan-genomic' comparisons of invasive vs. noninvasive, invasive vs. invasive, and native vs. exotic Bemisia, which, in return, will open up new avenues of investigation into whitefly biology, evolution, and management. © The Author 2017. Published by Oxford University Press.

Lay theories of gender identity disorder.

Science.gov (United States)

Furnham, Adrian; Sen, Radhika

2013-01-01

This study examined lay theories regarding gender identity disorder (GID). Pilot interviews were completed with participants (n = 10) regarding their views on possible causes and treatments of GID. Participants (mainly young British people and students; n = 124) then completed a questionnaire that was based on the interviews and a review of the salient literature on lay theories. As hypothesized, participants believed most in biomedical causes and treatments of GID. Factor analysis (with varimax rotation) identified 4 factors in relation to causes of GID: upbringing and personal factors, pregnancy and brain abnormalities, environmental factors, and biomedical causes. Five factors that were identified in relation to the cure/treatment of GID were psychological assistance and personal factors, extreme medical and behavioral changes, alternative therapies, external factors, and medical treatments. The results indicated that participants neither agreed nor strongly disagreed about causes and cures regarding GID, but that these beliefs were logically related. Limitations, particularly of sampling, were considered.

Frequency characteristic measurement of a fiber optic gyroscope using a correlation spectrum analysis method based on a pseudo-random sequence

International Nuclear Information System (INIS)

Li, Yang; Chen, Xingfan; Liu, Cheng

2015-01-01

The frequency characteristic is an important indicator of a system’s dynamic performance. The identification of a fiber optic gyroscope (FOG)’s frequency characteristic using a correlation spectrum analysis method based on a pseudo-random sequence is proposed. Taking the angle vibrator as the source of the test rotation stimulation and a pseudo-random sequence as the test signal, the frequency characteristic of a FOG is calculated according to the power spectral density of the rotation rate signal and the cross-power spectral density of the FOG’s output signal and rotation rate signal. A theoretical simulation is done to confirm the validity of this method. An experiment system is built and the test results indicate that the measurement error of the normalized amplitude–frequency response is less than 0.01, that the error of the phase–frequency response is less than 0.3 rad, and the overall measurement accuracy is superior to the traditional frequency-sweep method. By using this method, the FOG’s amplitude–frequency response and phase–frequency response can be measured simultaneously, quickly, accurately, and with a high frequency resolution. The described method meets the requirements of engineering applications. (paper)

Medical Judgments Across the Range of Reported Pain Severity: Clinician and Lay Perspectives.

Science.gov (United States)

Tait, Raymond C; Chibnall, John T; House, Kylie; Biehl, Joann

2016-07-01

While increasing evidence suggests that observers discount high-severity chronic pain, factors that occasion such discounting are poorly understood, particularly regarding health provider vs lay perspectives. This study examined the effects of supporting medical evidence and comorbid psychological distress (pain behavior) on medical student and lay clinical judgments of increasingly severe patient pain reports. In a 2 × 2 × 2 × (7) mixed between- and within-subject design, participants (medical students vs lay) made clinical judgments after reading vignettes describing a hypothetical patient that varied in levels of medical evidence and pain behavior (low vs high) and pain severity (4/10-10/10). Fourth-year medical students (N = 115) and lay persons in the community (N = 300) participated in this research. While both medical student and lay judgments plateaued at high levels of pain severity, judgments regarding cause (medical vs psychological), treatment (opioid prescription), and disability showed growing divergence as levels of reported pain severity increased. Divergence relative to medical and psychological causes of pain was found irrespective of the level of supporting medical evidence; divergence relative to opioid treatment and support for a disability claim was found when supporting medical evidence was low. The results indicate differing expectations of chronic pain treatment for health care providers relative to the lay public that could impact clinical care, especially at high pain severity levels, where lay expectations diverge significantly from those of health professionals. © 2015 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Fiber Sensor Technology Today

Science.gov (United States)

Hotate, Kazuo

2006-08-01

Fiber sensor technologies are overviewed. Since the early 1970s, this field has been developed, on the basis of the same devices and photonic principles as fiber communication technologies. Besides simple configurations, in which the fiber acts only as a data transmission line, sophisticated configurations have also been developed, in which the fiber is used as a device to realize unique sensing mechanisms. The fiber optic gyroscope (FOG) is a good example, and has been developed as an absolute rotation sensor used, for example, for navigation and/or attitude control applications. Compared with traditional spinning-mass gyroscopes, the FOG has advantages, such as a short warming-up time, a light weight, and easy handling. A Japanese satellite, which was launched in August 2005 with a mission to observe the aurora, is controlled with a FOG. The FOG has also been used in consumer applications, such as the camera stabilizer, radio-controlled (RC) helicopter navigation, and the control of humanoid robots. Recently, distributed and multiplexed sensing schemes, in particular, have been studied and developed, in which a long fiber acts like a “nerve” for feeling the strain and/or the temperature distribution along the fiber. Performances of artificial nerve systems have markedly improved within the last couple of years, in spatial resolution and measurement speed. By embedding the “fiber-optic nerve system” in aircraft wings, bridges and tall buildings, these materials and structures can sense damage to prevent disasters.

Advanced ultrafast fiber laser sources enabled by fiber nonlinearities

International Nuclear Information System (INIS)

Liu, Wei

2017-05-01

Development of high power/energy ultrafast fiber lasers for scientific research and industrial applications is one of the most exciting fields in ultrafast optics. This thesis demonstrated new means to improve two essential properties - which are indispensable for novel applications such as high-harmonic generation (HHG) and multiphoton microscopy (MPM) - of an ultrafast fiber laser system: energy scaling capability and wavelength tunability. High photon-flux extreme ultraviolet sources enabled by HHG desire high power (>100 W), high repetition-rate (>1 MHz) ultrafast driving laser sources. We have constructed from scratch a high-power Yb-fiber laser system using the well-known chirped-pulse amplification (CPA) technique. Such a CPA system capable of producing ∝200-W average power consists of a monolithic Yb-fiber oscillator, an all-fiber stretcher, a pre-amplifier chain, a main amplifier constructed from rode-type large pitch fiber, and a diffraction-grating based compressor. To increase the HHG efficiency, ultrafast pulses with duration 130-W average power. The amplified pulses are compressed to 60-fs pulses with 100-W average power, constituting a suitable HHG driving source. MPM is a powerful biomedical imaging tool, featuring larger penetration depth while providing the capability of optical sectioning. Although femtosecond solid-state lasers have been widely accepted as the standard option as MPM driving sources, fiber-based sources have received growing research efforts due to their superior performance. In the second part of this thesis, we both theoretically and experimentally demonstrated a new method of producing wavelength widely tunable femtosecond pulses for driving MPM. We employed self-phase modulation to broaden a narrowband spectrum followed by bandpass filters to select the rightmost/leftmost spectral lobes. Widely tunable in 820-1225 nm, the resulting sources generated nearly transform-limited, ∝100 fs pulses. Using short fibers with large

Responding to Expert Arguments. Emerging Lay Topoi in Focus Group Interviews on GM-Crops

DEFF Research Database (Denmark)

Horsbøl, Anders

2009-01-01

interaction (Myers 2004), in casu in focus groups interviews with both GM-experts and lay persons without specific knowledge on GM-crops. The paper analyses the lay persons' responses to persuasive expert utterances as inventive contributions to the discussion, not just as reactions showing either support...... or rejection. That is, the paper analyses the topoi, the argumentative ‘places', realized by the lay persons in dealing with and making sense of the new knowledge presented by the experts. Finally, the paper identifies the social identities as participants in a public debate, which are enacted by the lay...

Fatigue Performance of Fiber Reinforced Concrete

DEFF Research Database (Denmark)

Jun, Zhang; Stang, Henrik

1996-01-01

The objective of the present study is to obtain basic data of fibre reinforced concrete under fatigue load and to set up a theoretical model based on micromechanics. In this study, the bridging stress in fiber reinforced concrete under cyclic tensile load was investigted in details. The damage...... mechanism of the interface between fiber and matrix was proposed and a rational model given. Finally, the response of a steel fiber reinforced concrete beam under fatigue loading was predicted based on this model and compared with experimental results....

Carryover of maduramicin from feed containing cross-contamination levels into eggs of laying hens.

Science.gov (United States)

Bodi, Dorina; Fry, Hildburg; Schafft, Helmut; Lahrssen-Wiederholt, Monika; Preiss-Weigert, Angelika

2012-07-18

Maduramicin is a coccidiostat authorized as feed additive in the European Union for chickens and turkeys for fattening but not for laying hens, considering the risk of residues in eggs. The unavoidable cross-contamination of non-target feed with coccidiostats is regulated by Commission Directive 2009/8/EC and resulting carry-over in food by Commission Regulation (EC) No. 124/2009. To verify the compliance of the maximum levels for maduramicin in feed (50 μg/kg) and eggs (2 μg/kg), the carry-over from feed into eggs was investigated. Diets containing 10, 30, and 50 μg of maduramicin/kg of feed were fed to laying hens. Feed, egg white, and yolk were analyzed by LC-MS/MS. Maduramicin residues were only detected in in egg yolk. Feeding the 10 μg/kg maduramicin diet resulted in maduramicin concentrations up to 2.5 μg/kg in whole eggs, already exceeding the maximum level. A carry-over rate of 8% maduramicin from feed into eggs was calculated.

The acceptability of conducting data linkage research without obtaining consent: lay people's views and justifications.

Science.gov (United States)

Xafis, Vicki

2015-11-17

A key ethical issue arising in data linkage research relates to consent requirements. Patients' consent preferences in the context of health research have been explored but their consent preferences regarding data linkage specifically have been under-explored. In addition, the views on data linkage are often those of patient groups. As a result, little is known about lay people's views and their preferences about consent requirements in the context of data linkage. This study explores lay people's views and justifications regarding the acceptability of conducting data linkage research without obtaining consent. A qualitative study explored lay people's views regarding consent requirements in data linkage via four hypothetical data linkage scenarios of increasing complexity. Prior to considering the scenarios, participants were provided with information regarding best practice data linkage processes via discussion and a diagrammatic representation of the process. Lay people were able to understand the intricate processes involved in data linkage and the key protections afforded within a short amount of time. They were supportive of data linkage research and, on the whole, believed it should be conducted without consent provided a data linkage organization de-identifies the data used so that researchers do not handle identifiable data. Many thought that de-identified data holds a different status to identifiable data and should be used without specific consent in research that aims to benefit society. In weighing up conflicting values and interests, participants shifted consent preferences before arriving at their final consent preference for each scenario and provided justifications for their choices. They considered the protection of people's information, societal benefits, and the nature and constraints of research and recognized that these need to be balanced. With some exposure to the features of data linkage, lay people have the capacity to understand the

Advanced ultrafast fiber laser sources enabled by fiber nonlinearities

Energy Technology Data Exchange (ETDEWEB)

Liu, Wei

2017-05-15

to broaden a narrowband spectrum followed by bandpass filters to select the rightmost/leftmost spectral lobes. Widely tunable in 820-1225 nm, the resulting sources generated nearly transform-limited, ∝100 fs pulses. Using short fibers with large mode-field-diameter for spectral broadening, we obtained ultrashort pulses with the pulse energies up to 20 nJ. We applied such an enabling source to drive MPM imaging of both cancer cells and skin samples.

Standardising the Lay: Logics of Change in Programs of Disease Self-management

Directory of Open Access Journals (Sweden)

Annegrete Juul Nielsen

2012-11-01

Full Text Available The health political discourse on self-care is dominated by the view that the selfmanaging patient represents a more democratic and patient-centric perspective, as he or she is believed to renegotiate the terms on which patient participation in health care has hitherto taken place. The self-managing patient is intended as a challenge to traditional medical authority by introducing lay methods of knowing disease. Rather than a meeting between authoritative professionals and vulnerable patients, the self-managing patient seeks to open up new spaces for a meeting between experts. The present paper questions these assumptions through an ethnographic exploration of a patient-led self-management program called the Chronic Disease Self-Management Program. The program is concerned with what its developers call the social and mental aspects of living with a chronic disease and uses trained patients as role models and program leaders. Drawing inspiration from Annemarie Mol’s term ‘logic’, we explore the rationale of ‘situations of selfmanagement’ and identify what we call a ‘logic of change’, which involves very specific ideas on how life with a chronic condition should be dealt with and directs attention towards particular manageable aspects of life with a chronic condition. This logic of change entails, we argue, a clash not between ‘medical’ and ‘lay’ forms of knowledge but between different logics or perceptions of how transformation can be achieved: through open-ended and ongoing reflection and experimentation in social settings or through standardised trajectories of change. Returning to the literature on lay forms of knowledge and illness perspectives, we question whether programs such as the Chronic Disease Self-Management Program – despite its apparent patient-centric perspective – reproduces classical hierarchical relations between lay and expert knowledge, albeit in new forms.

Multiwavelength ytterbium-Brillouin random Rayleigh feedback fiber laser

Science.gov (United States)

Wu, Han; Wang, Zinan; Fan, Mengqiu; Li, Jiaqi; Meng, Qingyang; Xu, Dangpeng; Rao, Yunjiang

2018-03-01

In this letter, we experimentally demonstrate the multiwavelength ytterbium-Brillouin random fiber laser for the first time, in the half-open cavity formed by a fiber loop mirror and randomly distributed Rayleigh mirrors. With a cladding-pumped ytterbium-doped fiber and a long TrueWave fiber, the narrow linewidth Brillouin pump can generate multiple Brillouin Stokes lines with hybrid ytterbium-Brillouin gain. Up to six stable channels with a spacing of about 0.06 nm are obtained. This work extends the operation wavelength of the multiwavelength Brillouin random fiber laser to the 1 µm band, and has potential in various applications.

Should trained lay providers perform HIV testing? A systematic review to inform World Health Organization guidelines.

Science.gov (United States)

Kennedy, C E; Yeh, P T; Johnson, C; Baggaley, R

2017-12-01

New strategies for HIV testing services (HTS) are needed to achieve UN 90-90-90 targets, including diagnosis of 90% of people living with HIV. Task-sharing HTS to trained lay providers may alleviate health worker shortages and better reach target groups. We conducted a systematic review of studies evaluating HTS by lay providers using rapid diagnostic tests (RDTs). Peer-reviewed articles were included if they compared HTS using RDTs performed by trained lay providers to HTS by health professionals, or to no intervention. We also reviewed data on end-users' values and preferences around lay providers preforming HTS. Searching was conducted through 10 online databases, reviewing reference lists, and contacting experts. Screening and data abstraction were conducted in duplicate using systematic methods. Of 6113 unique citations identified, 5 studies were included in the effectiveness review and 6 in the values and preferences review. One US-based randomized trial found patients' uptake of HTS doubled with lay providers (57% vs. 27%, percent difference: 30, 95% confidence interval: 27-32, p lay providers. Studies from Cambodia, Malawi, and South Africa comparing testing quality between lay providers and laboratory staff found little discordance and high sensitivity and specificity (≥98%). Values and preferences studies generally found support for lay providers conducting HTS, particularly in non-hypothetical scenarios. Based on evidence supporting using trained lay providers, a WHO expert panel recommended lay providers be allowed to conduct HTS using HIV RDTs. Uptake of this recommendation could expand HIV testing to more people globally.

Pick-up and impact of flexible bodies

Science.gov (United States)

Singh, H.; Hanna, J. A.

2017-09-01

Picking up, laying down, colliding, rolling, and peeling are partial-contact interactions involving moving discontinuities. We examine the balances of momentum and energy across a moving discontinuity in a string, with allowance for injection or dissipation by singular supplies. We split the energy dissipation according to its invariance properties, discuss analogies with systems of particles and connections with the literature on shocks and phase transition fronts in various bodies, and derive a compatibility relation between supplies of momentum and translation-invariant energy. For a moving contact discontinuity between a string and a smooth rigid plane in the presence of gravity, we find a surprising asymmetry between the processes of picking up and laying down, such that steady-state kinks in geometry and associated jumps in tension are not admissible during pick-up. This prediction is consistent with experimental observations. We briefly discuss related problems including the falling folded chain, peeling of an adhesive tape, and the "chain fountain". Our approach is applicable to the study of impact and locomotion, and to systems such as moored floating structures and some musical instruments that feature vibrating string and cable elements interacting with a surface.

Mechanical properties and production quality of hand-layup and vacuum infusion processed hybrid composite materials for GFRP marine structures

Science.gov (United States)

Kim, Sang-Young; Shim, Chun Sik; Sturtevant, Caleb; Kim, Dave (Dae-Wook); Song, Ha Cheol

2014-09-01

Glass Fiber Reinforced Plastic (GFRP) structures are primarily manufactured using hand lay-up or vacuum infusion techniques, which are cost-effective for the construction of marine vessels. This paper aims to investigate the mechanical properties and failure mechanisms of the hybrid GFRP composites, formed by applying the hand lay-up processed exterior and the vacuum infusion processed interior layups, providing benefits for structural performance and ease of manufacturing. The hybrid GFRP composites contain one, two, and three vacuum infusion processed layer sets with consistent sets of hand lay-up processed layers. Mechanical properties assessed in this study include tensile, compressive and in-plane shear properties. Hybrid composites with three sets of vacuum infusion layers showed the highest tensile mechanical properties while those with two sets had the highest mechanical properties in compression. The batch homogeneity, for the GFRP fabrication processes, is evaluated using the experimentally obtained mechanical properties

Mechanical properties and production quality of hand-layup and vacuum infusion processed hybrid composite materials for GFRP marine structures

Directory of Open Access Journals (Sweden)

Kim Sang-Young

2014-09-01

Full Text Available Glass Fiber Reinforced Plastic (GFRP structures are primarily manufactured using hand lay-up or vacuum infusion techniques, which are cost-effective for the construction of marine vessels. This paper aims to investigate the mechanical properties and failure mechanisms of the hybrid GFRP composites, formed by applying the hand lay-up processed exterior and the vacuum infusion processed interior layups, providing benefits for structural performance and ease of manufacturing. The hybrid GFRP composites contain one, two, and three vacuum infusion processed layer sets with consistent sets of hand lay-up processed layers. Mechanical properties assessed in this study include tensile, compressive and in-plane shear properties. Hybrid composites with three sets of vacuum infusion layers showed the highest tensile mechanical properties while those with two sets had the highest mechanical properties in compression. The batch homogeneity, for the GFRP fabrication processes, is evaluated using the experimentally obtained mechanical properties

Mechanical properties and production quality of hand-layup and vacuum infusion processed hybrid composite materials for GFRP marine structures

Directory of Open Access Journals (Sweden)

Sang-Young Kim

2014-09-01

Full Text Available Glass Fiber Reinforced Plastic (GFRP structures are primarily manufactured using hand lay-up or vacuum infusion techniques, which are cost-effective for the construction of marine vessels. This paper aims to investigate the mechanical properties and failure mechanisms of the hybrid GFRP composites, formed by applying the hand lay-up processed exterior and the vacuum infusion processed interior layups, providing benefits for structural performance and ease of manufacturing. The hybrid GFRP composites contain one, two, and three vacuum infusion processed layer sets with consistent sets of hand lay-up processed layers. Mechanical properties assessed in this study include tensile, compressive and in-plane shear properties. Hybrid composites with three sets of vacuum infusion layers showed the highest tensile mechanical properties while those with two sets had the highest mechanical properties in compression. The batch homogeneity, for the GFRP fabrication processes, is evaluated using the experimentally obtained mechanical properties.

The complete nucleotide sequence, genome organization, and origin of human adenovirus type 11

International Nuclear Information System (INIS)

Stone, Daniel; Furthmann, Anne; Sandig, Volker; Lieber, Andre

2003-01-01

The complete DNA sequence and transcription map of human adenovirus type 11 are reported here. This is the first published sequence for a subgenera B human adenovirus and demonstrates a genome organization highly similar to those of other human adenoviruses. All of the genes from the early, intermediate, and late regions are present in the expected locations of the genome for a human adenovirus. The genome size is 34,794 bp in length and has a GC content of 48.9%. Sequence alignment with genomes of groups A (Ad12), C (Ad5), D (Ad17), E (Simian adenovirus 25), and F (Ad40) revealed homologies of 64, 54, 68, 75, and 52%, respectively. Detailed genomic analysis demonstrated that Ads 11 and 35 are highly conserved in all areas except the hexon hypervariable regions and fiber. Similarly, comparison of Ad11 with subgroup E SAV25 revealed poor homology between fibers but high homology in proteins encoded by all other areas of the genome. We propose an evolutionary model in which functional viruses can be reconstituted following fiber substitution from one serotype to another. According to this model either the Ad11 genome is a derivative of Ad35, from which the fiber was substituted with Ad7, or the Ad35 genome is the product of a fiber substitution from Ad21 into the Ad11 genome. This model also provides a possible explanation for the origin of group E Ads, which are evolutionarily derived from a group C fiber substitution into a group B genome

The development of egg-laying behaviour and nest-site selection in a strain of white laying hens

NARCIS (Netherlands)

Rietveld - Piepers, B.

1987-01-01

Since World War II livestock husbandry has been highly intensificated. This trend was most obvious in the poultry industry. Laying hens used to be housed outdoors in free-range systems, but nowadays these systems have almost entirely been replaced by the battery-cage. In the early sixties

Enantioselective Characteristics and Montmorillonite-Mediated Removal Effects of α-Hexachlorocyclohexane in Laying Hens.

Science.gov (United States)

Liu, Xueke; Shen, Zhigang; Wang, Peng; Liu, Chang; Yao, Guojun; Zhou, Zhiqiang; Liu, Donghui

2016-06-07

α-Hexachlorocyclohexane (α-HCH) is a chiral organochlorine pesticide that is often ubiquitously detected in various environmental matrices and may be absorbed by the human body via food consumption, with serious detriments to human health. In this study, enantioselective degradation kinetics and residues of α-HCH in laying hens were investigated after a single dose of exposure to the pesticide, whereas enantioselectivity and residues of α-HCH in eggs, droppings, and various tissues were investigated after long-term exposure. Meanwhile, montmorillonite (MMT), a feed additive with high capacity of adsorption, was investigated for its ability to remove α-HCH from laying hens. Most non-brain tissues enantioselectively accumulated (-)-α-HCH, while (+)-α-HCH was preferentially accumulated in the brain. The enantiomer fractions (EFs) in most tissues gradually decreased, implying continuous depletion of (+)-α-HCH in laying hens. After 30 days of exposure and 31 days of elimination, the concentration of α-HCH in eggs and tissues of laying hens with MMT-containing feed was lower than that with MMT-free feed, indicating the removal effects of MMT for α-HCH in laying hens. The findings presented herein suggest that modified MMT may potentially be useful in reducing the enrichment of α-HCH in laying hens and eggs, thus lowering the risk of human intake of α-HCH.

Electromechanical behavior of fiber-reinforced dielectric elastomer membrane

Directory of Open Access Journals (Sweden)

Chi Li

2015-04-01

Full Text Available Based on its large deformation, light weight, and high energy density, dielectric elastomer (DE has been used as driven muscle in many areas. We design the fiber-reinforced DE membrane by adding fibers in the membrane. The deformation and driven force direction of the membrane can be tuned by changing the fiber arrangements. The actuation in the perpendicular direction of the DE membrane with long fibers first increases and then decreases by the increasing of the fiber spacing in the perpendicular direction. The horizontal actuation of the membrane decreases by decreasing the spacing of short fibers. In the membrane-inflating structure, the radially arranged fibers will break the axisymmetric behavior of the structure. The top area of the inflated balloon without fiber will buckle up when the voltage reaches a certain level. Finite element simulations based on nonlinear field theory are conducted to investigate the effects of fiber arrangement and verify the experimental results. This work can guide the design of fiber-reinforced DE.

Strength training in community settings: impact of lay leaders on program access and sustainability for rural older adults.

Science.gov (United States)

Washburn, Lisa T; Cornell, Carol E; Phillips, Martha; Felix, Holly; Traywick, LaVona

2014-09-01

The effect of volunteer lay leaders on availability and sustainability of strength-training programs for older adults has not been well explored. We describe implementation of the StrongWomen strength training program by the Arkansas Cooperative Extension Service, and report on the relationship between delivery approach (agent-led, lay-led, or combination of agent- and lay-led) and program access and sustainability. All state Extension agents (n = 66) were surveyed on program implementation, continuance, and use of lay leaders. Program records were used to identify the number of trained lay leaders. Regression models were used to examine the relationship between delivery approach and group availability. Counties using lay leaders had twice as many groups as counties using only agents. There was a significant, positive relationship between the number of lay leaders and the number of groups. Counties using lay leaders were 8.3 times more likely to have continuing groups compared with counties not using lay leaders. Program continuance was significantly and positively associated with lay leader use. Lay delivery expanded access to strength training programs and increased the likelihood that programs would continue. This approach can be used to increase access to and sustainability of strength training programs, particularly in resource-constrained areas.

Lay up of a 750 t/h combined unit under the aspect of the liberalized power market; Konservierung eines 750-t/h-Kombi-Blockes unter dem Aspekt des liberalisierten Strommarktes

Energy Technology Data Exchange (ETDEWEB)

Reimschuessel, R.; Bellroth, A.; Borgwardt, P.; Krohn, K. [Kraftwerke Mainz-Wiesbaden AG, Mainz (Germany)

2003-07-01

We have been forced by the rough competition on the liberalised power market, especially in the last 15 months, to shut down our unit II, a 345 MW el. combined unit with gas turbine with following 750 t once-through boiler (Benson-type) and an efficiency of 44%, for a shorter or longer period of time. At the same time, availability must be ensured to cope with the price situation/development on the power market. Out of this difficult situation we developed a lay-up concept which allows shutdowns from one week up to six months and the restart within 75 hours. (orig.) [German] Durch die harten Wettbewerbsbedingungen des liberalisierten Strommarktes in Deutschland wurden wir gerade in den letzten beiden Jahren gezwungen, unser Kraftwerk II ueber kuerzere oder laengere Zeitraeume stillzulegen. Gleichzeitig sollte eine schnelle Verfuegbarkeit der Anlage gewaehrleistet sein, um der durch die Stromboerse gehandelten Preissituation gerecht werden zu koennen. Aus dieser schwierigen Situation heraus ist ein Konservierungskonzept entwickelt worden, das Stillstaende von einer Woche bis zu sechs Monaten und eine Wiederverfuegbarkeit innerhalb von 75 h erlaubt. (orig.)

Chlorinated drinking water for lightweight laying hens

Directory of Open Access Journals (Sweden)

A.F. Schneider

Full Text Available ABSTRACT The study aimed to evaluate the effect of different levels of chlorine in drinking water of laying hens on zootechnical performance, eggs shell quality, hemogasometry levels and calcium content in tibia. 144 Hy-Line laying hens, 61 weeks old, were used distributed in 24 metabolism cages. They were subjected to water diets, for a period of 28 days, using sodium hypochlorite as a chlorine source in order to obtain the following concentrations: 5ppm (control, 20ppm, 50ppm, and 100ppm. Their performance was evaluated through water consumption, feed intake, egg production and weight, egg mass, feed conversion. Shell quality was measured by specific gravity. At the end of the experiment, arterial blood was collected for blood gas level assessment and a poultry of each replicate was sacrificed to obtain tibia and calcium content measurement. There was a water consumption reduction from 20ppm of chlorine and feed intake reduction in poultry receiving water with 100ppm of chlorine. The regression analysis showed that the higher the level of chlorine in water, the higher the reduction in consumption. There were no differences in egg production and weight, egg mass, feed conversion, specific gravity, tibia calcium content, and hemogasometry levels (hydrogenionic potential, carbon dioxide partial pressure, oxygen partial pressure, sodium, potassium, chloride, bicarbonate, carbon dioxide total concentration, anion gap and oxygen saturation. The use of levels above 5ppm of chlorine is not recommended in the water of lightweight laying hens.

THE PERFORMANCE OF LAYING HENS FED DIFFERENT CALCIUM SOURCE

Directory of Open Access Journals (Sweden)

S. Kismiati

2012-12-01

Full Text Available The research was aimed to evaluate the performance of laying hens fed different calcium sources. Two hundreds of Isa Brown laying hens were used in this study. The hens were raised in individual battery cages units for 12 weeks. Four calcium source (limestone as a control, 5% limestone + 2.5% eggshells waste, 2.5% limestone + 5% eggshells waste and 7.5% eggshell waste were used in feed experiment. A completely randomized design was applied, with 4 treatments and 5 replications. Each experimental unit consisted of 10 laying hens. The parameters measured were feed intake, protein intake, calcium intake, phosphorus intake, egg production, egg weight and feed conversion ratio. Results of the research showed that the calcium source had significantly effect on performance productions. The use of eggshell waste 7.5% significantly increased the feed intake, calcium intake, phosphorus intake, egg production and egg weight except for feed conversion ratio. The conclusion of this research was that the use of eggshell waste as calcium source of feed resulted in better performance than using limestone or mixed limestone with eggshell waste.

Causes of mortality in laying hens in different housing systems in 2001 to 2004

Directory of Open Access Journals (Sweden)

Etterlin Pernille

2009-01-01

Full Text Available Abstract Background The husbandry systems for laying hens were changed in Sweden during the years 2001 – 2004, and an increase in the number of submissions for necropsy from laying hen farms was noted. Hence, this study was initiated to compare causes of mortality in different housing systems for commercial laying hens during this change. Methods Based on results from routine necropsies of 914 laying hens performed at the National Veterinary Institute (SVA in Uppsala, Sweden between 2001 and 2004, a retrospective study on the occurrence of diseases and cannibalism, i.e., pecking leading to mortality, in different housing systems was carried out. Using the number of disease outbreaks in caged flocks as the baseline, the expected number of flocks with a certain category of disease in the other housing systems was estimated having regard to the total number of birds in the population. Whether the actual number of flocks significantly exceeded the expected number was determined using a Poisson distribution for the variance of the baseline number, a continuity correction and the exact value for the Poisson distribution function in Excel 2000. Results Common causes of mortality in necropsied laying hens included colibacillosis, erysipelas, coccidiosis, red mite infestation, lymphoid leukosis and cannibalism. Less common diagnoses were Newcastle Disease, pasteurellosis and botulism. Considering the size of the populations in the different housing systems, a larger proportion of laying hens than expected was submitted for necropsy from litter-based systems and free range production compared to hens in cages (P P P Conclusion The results of the present study indicated that during 2001–2004 laying hens housed in litter-based housing systems, with or without access to outdoor areas, were at higher risk of infectious diseases and cannibalistic behaviour compared to laying hens in cages. Future research should focus on finding suitable prophylactic

Magneto-carbonization method for production of carbon fiber, and high performance carbon fibers made thereby

Science.gov (United States)

Naskar, Amit K.; Ozcan, Soydan; Eberle, Claude C.; Abdallah, Mohamed Gabr; Mackiewicz, Ludtka Gail; Ludtka, Gerard Michael; Paulauskas, Felix Leonard; Rivard, John Daniel Kennedy

2017-08-08

Method for the preparation of carbon fiber from fiber precursor, wherein the fiber precursor is subjected to a magnetic field of at least 3 Tesla during a carbonization process. The carbonization process is generally conducted at a temperature of at least 400.degree. C. and less than 2200.degree. C., wherein, in particular embodiments, the carbonization process includes a low temperature carbonization step conducted at a temperature of at least or above 400.degree. C. or 500.degree. C. and less than or up to 1000.degree. C., 1100.degree. C., or 1200.degree. C., followed by a high temperature carbonization step conducted at a temperature of at least or above 1200.degree. C. In particular embodiments, particularly in the case of a polyacrylonitrile (PAN) fiber precursor, the resulting carbon fiber may possess a minimum tensile strength of at least 600 ksi, a tensile modulus of at least 30 Msi, and an ultimate elongation of at least 1.5%.

Adhesion of cellulose fibers in paper.

Science.gov (United States)

Persson, Bo N J; Ganser, Christian; Schmied, Franz; Teichert, Christian; Schennach, Robert; Gilli, Eduard; Hirn, Ulrich

2013-01-30

The surface topography of paper fibers is studied using atomic force microscopy (AFM), and thus the surface roughness power spectrum is obtained. Using AFM we have performed indentation experiments and measured the effective elastic modulus and the penetration hardness as a function of humidity. The influence of water capillary adhesion on the fiber-fiber binding strength is studied. Cellulose fibers can absorb a significant amount of water, resulting in swelling and a strong reduction in the elastic modulus and the penetration hardness. This will lead to closer contact between the fibers during the drying process (the capillary bridges pull the fibers into closer contact without storing up a lot of elastic energy at the contacting interface). In order for the contact to remain good in the dry state, plastic flow must occur (in the wet state) so that the dry surface profiles conform to each other (forming a key-and-lock type of contact).

Information transmission via fiber optics in the shiva laser control system

International Nuclear Information System (INIS)

Parker, J.

1978-01-01

The Fiber Optic Serial Link package performs the functions of transmission and reception of signals over a pair of fiber optic cables and the I/O of serial data to a local device in EIA format. Present sysems requirements include fiber cable transmission length of up to 150 m and baud rates up to 9600, although the design criterium of transmission at 19.2 KB has been met. Fiber optic links are used between the central control area and each of the alignment control subsystems, in addition to sending timing signals over long distances between subsystems

Effects of nitrogen on egg-laying inhibition and ovicidal response in planthopper-resistant rice varieties.

Science.gov (United States)

Horgan, Finbarr G; Srinivasan, Thanga Suja; Naik, Bhaskar S; Ramal, Angelee Fame; Bernal, Carmencita C; Almazan, Maria Liberty P

2016-11-01

A series of experiments was set up to examine the effects of nitrogen on rice ( Oryza sativa L.) resistance against Nilaparvata lugens (Stål) and Sogatella furcifera (Horváth). Egg laying by N. lugens was reduced on the indica variety IR60. Nymph biomass ( N. lugens and S. furcifera ) was also lower on IR60: this was associated with low honeydew production and a high proportion of xylem-derived honeydew in N. lugens but not in S. furcifera . Nitrogen increased egg-laying by S. furcifera and increased N. lugens nymph biomass on all varieties tested. Oviposition and egg mortality in both planthopper species were examined on plants at 15, 30 and 45 days after sowing (DAS). Sogatella furcifera laid more eggs on plants at 15 DAS, but laid few eggs during darkness; N. lugens continued to lay eggs on older rice plants (30 DAS) and during darkness. Egg mortality was high on cv. Asiminori, highest at 45 DAS, and higher for S. furcifera than for N. lugens . Mortality of S. furcifera eggs was associated with lesions around the egg clusters. These were more common around clusters laid during the day and suggested induction by Asiminori of an ovicidal response. Egg mortality declined under higher soil nitrogen levels. Results are discussed in the light of improving rice resistance against planthoppers and reducing rates of planthopper adaptation to resistance genes.

Lay and expert perceptions of zoonotic risks

DEFF Research Database (Denmark)

Jensen, Karsten Klint; Lassen, Jesper; Robinson, P.

2005-01-01

As in many other areas, there is a divide between lay and expert perceptions of risk within the food sector, and this can lead to disagreement over priorities in food risk management. The risk perception literature tends to stress that the parties involved in this disagreement have different...... concepts of risk and hence are bound more or less to talk at cross-purposes. This paper suggests an alternative analysis: In the light of moral theory, the conflicting perspectives can be understood as a genuine moral conflict. When this conflict is conceptualised, a rational dialogue becomes possible....... The paper reports a series of qualitative interviews with lay people and experts on zoonotic food risks. The interviews are used to reconstruct the values underlying some of the dominant perspectives. The conflict between these stylised perspectives is then analysed with the help of moral theory. Finally...

A fiber orientation-adapted integration scheme for computing the hyperelastic Tucker average for short fiber reinforced composites

Science.gov (United States)

Goldberg, Niels; Ospald, Felix; Schneider, Matti

2017-10-01

In this article we introduce a fiber orientation-adapted integration scheme for Tucker's orientation averaging procedure applied to non-linear material laws, based on angular central Gaussian fiber orientation distributions. This method is stable w.r.t. fiber orientations degenerating into planar states and enables the construction of orthotropic hyperelastic energies for truly orthotropic fiber orientation states. We establish a reference scenario for fitting the Tucker average of a transversely isotropic hyperelastic energy, corresponding to a uni-directional fiber orientation, to microstructural simulations, obtained by FFT-based computational homogenization of neo-Hookean constituents. We carefully discuss ideas for accelerating the identification process, leading to a tremendous speed-up compared to a naive approach. The resulting hyperelastic material map turns out to be surprisingly accurate, simple to integrate in commercial finite element codes and fast in its execution. We demonstrate the capabilities of the extracted model by a finite element analysis of a fiber reinforced chain link.

Influence of Lay Plan Solution in Fabric Efficiency and Consume in Cutting Section

OpenAIRE

Dumishllari Elmira; Guxho Genti

2016-01-01

One cutting order may require several lies and markers to achieve optimal efficiency and selection of right Lay Plan is one of the major challenges in cutting section, in a way to lead in fabric economy and reduced costs. The main purpose of this paper is to determine the best solution of lay plan and its influence, in the cutting room, starting from the analysis of the lay indicators calculations. We have studied an order with 200 jackets, with specific sizes. Markers are made by Gemini CAD ...

Strain Sharing Assessment in Woven Fiber Reinforced Concrete Beams Using Fiber Bragg Grating Sensors.

Science.gov (United States)

Montanini, Roberto; Recupero, Antonino; De Domenico, Fabrizio; Freni, Fabrizio

2016-09-22

Embedded fiber Bragg grating sensors have been extensively used worldwide for health monitoring of smart structures. In civil engineering, they provide a powerful method for monitoring the performance of composite reinforcements used for concrete structure rehabilitation and retrofitting. This paper discusses the problem of investigating the strain transfer mechanism in composite strengthened concrete beams subjected to three-point bending tests. Fiber Bragg grating sensors were embedded both in the concrete tensioned surface and in the woven fiber reinforcement. It has been shown that, if interface decoupling occurs, strain in the concrete can be up to 3.8 times higher than that developed in the reinforcement. A zero friction slipping model was developed which fitted very well the experimental data.

Differential abundance of egg white proteins in laying hens treated with corticosterone.

Science.gov (United States)

Kim, Jimin; Choi, Yang-Ho

2014-12-24

Stressful environments can affect not only egg production and quality but also gene and protein abundance in the ovary and oviduct in laying hens. The oviductal magnum of laying hens is the organ responsible for the synthesis and secretion of egg white proteins. The objective of this study was to investigate the effects of dietary corticosterone as a stress model on the abundance of proteins in the egg white and of mRNA and proteins in the magnum in laying hens. After a 14-day acclimation, 40 laying hens were divided into two groups which were provided for the next 14 days with either control (Control) or corticosterone (Stress) diet containing at 30 mg/kg. Corticosterone treatment resulted in increased feed intake (P ≤ 0.05) and decreased egg production. Two-dimensional electrophoresis (2DE) with MALDI-TOF/TOF MS/MS using eggs obtained on days 0 and 5 revealed differential abundance of egg white proteins by Stress: transiently expressed in neural precursors (TENP), hemopexin (HPX), IgY-Fcυ3-4, and extracellular fatty acid-binding protein (Ex-FABP) were decreased while ovoinhibitor and ovalbumin-related protein X (OVAX) were increased on days 5 vs 0 (P ≤ 0.05). Expression of mRNAs and proteins was also significantly modulated in the magnum of hens in Stress on day 14 (P ≤ 0.05). In conclusion, the current study provides the first evidence showing that dietary corticosterone modulates protein abundance in the egg white in laying hens, and it suggests that environmental stress can differentially modify expression of egg white proteins in laying hens.

First things first: effectiveness and scalability of a basic prehospital trauma care program for lay first-responders in Kampala, Uganda.

Directory of Open Access Journals (Sweden)

Sudha Jayaraman

Full Text Available BACKGROUND: We previously showed that in the absence of a formal emergency system, lay people face a heavy burden of injuries in Kampala, Uganda, and we demonstrated the feasibility of a basic prehospital trauma course for lay people. This study tests the effectiveness of this course and estimates the costs and cost-effectiveness of scaling up this training. METHODS AND FINDINGS: For six months, we prospectively followed 307 trainees (police, taxi drivers, and community leaders who completed a one-day basic prehospital trauma care program in 2008. Cross-sectional surveys and fund of knowledge tests were used to measure their frequency of skill and supply use, reasons for not providing aid, perceived utility of the course and kit, confidence in using skills, and knowledge of first-aid. We then estimated the cost-effectiveness of scaling up the program. At six months, 188 (62% of the trainees were followed up. Their knowledge retention remained high or increased. The mean correct score on a basic fund of knowledge test was 92%, up from 86% after initial training (n = 146 pairs, p = 0.0016. 97% of participants had used at least one skill from the course: most commonly haemorrhage control, recovery position and lifting/moving and 96% had used at least one first-aid item. Lack of knowledge was less of a barrier and trainees were significantly more confident in providing first-aid. Based on cost estimates from the World Health Organization, local injury data, and modelling from previous studies, the projected cost of scaling up this program was $0.12 per capita or $25-75 per life year saved. Key limitations of the study include small sample size, possible reporter bias, preliminary local validation of study instruments, and an indirect estimate of mortality reduction. CONCLUSIONS: Lay first-responders effectively retained knowledge on prehospital trauma care and confidently used their first-aid skills and supplies for at least six months. The costs of

Author Details

African Journals Online (AJOL)

Adediran, A.A.. Vol 22, No 1 (2018) - Articles Characterization and morphological properties of glass fiber reinforced epoxy composites fabricated under varying degrees of hand lay-up techniques. Abstract PDF. ISSN: 1119-8362. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

Micro Extrinsic Fiber-Optic Fabry-Perot Interferometric Sensor Based on Erbium- and Boron-Doped Fibers

International Nuclear Information System (INIS)

Yun-Jiang, Rao; Bing, Xu; Zeng-Ling, Ran; Yuan, Gong

2010-01-01

Micro extrinsic Fabry–Perot interferometers (MEFPIs), with cavity lengths of up to ∼ 9 μm and maximum fringe contrast of ∼ 19 dB, are fabricated by chemically etching Er- and B-doped optical fibers and then splicing the etched fiber to a single-mode fiber, for the first time to the best of our knowledge. The strain and temperature responses of the MEFPI sensors are investigated experimentally. Good linearity and high sensitivity are achieved. Such a type of MEFPI sensor is cost-effective and suitable for mass production, indicating its great potential for a wide range of applications. (fundamental areas of phenomenology(including applications))

Phylogenetic analysis of the kenaf fiber microbial retting community by semiconductor sequencing of 16S rDNA amplicons

Science.gov (United States)

Kenaf, hemp, and jute have been used for cordage and fiber production since prehistory. To obtain the fibers, harvested plants are soaked in ponds where indigenous microflora digests pectins and other heteropolysaccharides, releasing fibers in a process called retting. Renewed interest in “green” ...

Which future for conventional pipeline laying barges?; Quel avenir pour les barges de pose de pipelines conventionnelles ?

Energy Technology Data Exchange (ETDEWEB)

Borelli, A.; Perinet, D. [ETPM International (International organizations without location)

1997-05-01

The aim of this paper is to study the evolution of conventional pipeline laying barges. The past and todays capacities of some barges are presented in order to follow the evolution of their equipments with time to answer the market needs. The second part outlines the main characteristics of todays market needs. Different analyses are made according to the different means of pipeline laying: conventional, flexible pipes and rigid pipes using unrolling technique. Market trends in these 3 domains show a sensible growth from 1996 to 1997 and are assumed to keep a sustained level during the following years. However, the tendency shows an evolution towards smaller diameter pipes and greater depths. The last part concerns the evolution of laying barges. The most important improvements in pipeline laying industry concern the dynamic positioning, the laying techniques (`S` laying technique), and the rate of laying using real-time control techniques. (J.S.)

Fabrication of elastomeric silk fibers.

Science.gov (United States)

Bradner, Sarah A; Partlow, Benjamin P; Cebe, Peggy; Omenetto, Fiorenzo G; Kaplan, David L

2017-09-01

Methods to generate fibers from hydrogels, with control over mechanical properties, fiber diameter, and crystallinity, while retaining cytocompatibility and degradability, would expand options for biomaterials. Here, we exploited features of silk fibroin protein for the formation of tunable silk hydrogel fibers. The biological, chemical, and morphological features inherent to silk were combined with elastomeric properties gained through enzymatic crosslinking of the protein. Postprocessing via methanol and autoclaving provided tunable control of fiber features. Mechanical, optical, and chemical analyses demonstrated control of fiber properties by exploiting the physical cross-links, and generating double network hydrogels consisting of chemical and physical cross-links. Structure and chemical analyses revealed crystallinity from 30 to 50%, modulus from 0.5 to 4 MPa, and ultimate strength 1-5 MPa depending on the processing method. Fabrication and postprocessing combined provided fibers with extensibility from 100 to 400% ultimate strain. Fibers strained to 100% exhibited fourth order birefringence, revealing macroscopic orientation driven by chain mobility. The physical cross-links were influenced in part by the drying rate of fabricated materials, where bound water, packing density, and microstructural homogeneity influenced cross-linking efficiency. The ability to generate robust and versatile hydrogel microfibers is desirable for bottom-up assembly of biological tissues and for broader biomaterial applications. © 2017 Wiley Periodicals, Inc.

Teaching Special Relativity to Lay Students

Science.gov (United States)

Egdall, Ira Mark

2014-01-01

In this paper, I describe a lay course in special relativity (SR) given at the Osher Lifelong Learning Institutes (OLLI's) at Florida International University and the University of Miami. Courses are also offered in general relativity quantum theory cosmology the nature of time, and the fine-tuned universe. Each course is presented in six…

Exploring How Lay Rescuers Overcome Barriers to Provide Cardiopulmonary Resuscitation: A Qualitative Study.

Science.gov (United States)

Mathiesen, Wenche Torunn; Bjørshol, Conrad Arnfinn; Høyland, Sindre; Braut, Geir Sverre; Søreide, Eldar

2017-02-01

Survival rates after out-of-hospital cardiac arrest (OHCA) vary considerably among regions. The chance of survival is increased significantly by lay rescuer cardiopulmonary resuscitation (CPR) before Emergency Medical Services (EMS) arrival. It is well known that for bystanders, reasons for not providing CPR when witnessing an OHCA incident may be fear and the feeling of being exposed to risk. The aim of this study was to gain a better understanding of why barriers to providing CPR are overcome. Using a semi-structured interview guide, 10 lay rescuers were interviewed after participating in eight OHCA incidents. Qualitative content analysis was used. The lay rescuers were questioned about their CPR-knowledge, expectations, and reactions to the EMS and from others involved in the OHCA incident. They also were questioned about attitudes towards providing CPR in an OHCA incident in different contexts. The lay rescuers reported that they were prepared to provide CPR to anybody, anywhere. Comprehending the severity in the OHCA incident, both trained and untrained lay rescuers provided CPR. They considered CPR provision to be the expected behavior of any community citizen and the EMS to act professionally and urgently. However, when asked to imagine an OHCA in an unclear setting, they revealed hesitation about providing CPR because of risk to their own safety. Mutual trust between community citizens and towards social institutions may be reasons for overcoming barriers in providing CPR by lay rescuers. A normative obligation to act, regardless of CPR training and, importantly, without facing any adverse legal reactions, also seems to be an important factor behind CPR provision. Mathiesen WT , Bjørshol CA , Høyland S , Braut GS , Søreide E . Exploring how lay rescuers overcome barriers to provide cardiopulmonary resuscitation: a qualitative study. Prehosp Disaster Med. 2017;32(1):27-32.

Ghrelin plasma concentration does not covary with energy demand in adult laying hens.

Science.gov (United States)

Höhne, A; Schrader, L; Weigend, S; Petow, S

2017-10-01

The peptide hormone ghrelin is suggested to be involved in food intake regulation in young growing chicken. Whether ghrelin is involved in the regulation of energetic balance associated with laying performance in adult laying hens was studied by use of 4 chicken lines that differ in laying performance and phylogeny (4 lines; 16 hens per line). As housing conditions are also known to affect energy demand, half of the hens per line were housed in single cages and the other half of hens were maintained in a floor housing system. Plasma samples were collected at 17 to 19, 33 to 35, 49 to 51, and 72 wk of age and analyzed with a chicken ghrelin ELISA Kit. From caged hens, individual food consumption and laying performance additionally was recorded. Due to its function in growth and its relationship with ghrelin, also GH plasma concentrations were analyzed. Ghrelin concentrations did not differ between the 4 lines at any of the test periods (all P > 0.05). Ghrelin was negatively related to food consumption only in the growing period of the high-performing lines (both P ghrelin concentrations compared with caged hens (P ghrelin is not involved in regulating energy intake related to laying performance but rather seems to be related to body growth and housing condition before start of lay, the latter possibly due to differences in hens' behavioral activity. Copyright © 2017 Elsevier Inc. All rights reserved.

All-fiber intensity bend sensor based on photonic crystal fiber with asymmetric air-hole structure

Science.gov (United States)

Budnicki, Dawid; Szostkiewicz, Lukasz; Szymanski, Michal O.; Ostrowski, Lukasz; Holdynski, Zbigniew; Lipinski, Stanislaw; Murawski, Michal; Wojcik, Grzegorz; Makara, Mariusz; Poturaj, Krzysztof; Mergo, Pawel; Napierala, Marek; Nasilowski, Tomasz

2017-10-01

Monitoring the geometry of an moving element is a crucial task for example in robotics. The robots equipped with fiber bend sensor integrated in their arms can be a promising solution for medicine, physiotherapy and also for application in computer games. We report an all-fiber intensity bend sensor, which is based on microstructured multicore optical fiber. It allows to perform a measurement of the bending radius as well as the bending orientation. The reported solution has a special airhole structure which makes the sensor only bend-sensitive. Our solution is an intensity based sensor, which measures power transmitted along the fiber, influenced by bend. The sensor is based on a multicore fiber with the special air-hole structure that allows detection of bending orientation in range of 360°. Each core in the multicore fiber is sensitive to bend in specified direction. The principle behind sensor operation is to differentiate the confinement loss of fundamental mode propagating in each core. Thanks to received power differences one can distinguish not only bend direction but also its amplitude. Multicore fiber is designed to utilize most common light sources that operate at 1.55 μm thus ensuring high stability of operation. The sensitivity of the proposed solution is equal 29,4 dB/cm and the accuracy of bend direction for the fiber end point is up to 5 degrees for 15 cm fiber length. Such sensitivity allows to perform end point detection with millimeter precision.

Long-distance fiber optic sensing solutions for pipeline leakage, intrusion, and ground movement detection

Science.gov (United States)

Nikles, Marc

2009-05-01

An increasing number of pipelines are constructed in remote regions affected by harsh environmental conditions where pipeline routes often cross mountain areas which are characterized by unstable grounds and where soil texture changes between winter and summer increase the probability of hazards. Third party intentional interference or accidental intrusions are a major cause of pipeline failures leading to large leaks or even explosions. Due to the long distances to be monitored and the linear nature of pipelines, distributed fiber optic sensing techniques offer significant advantages and the capability to detect and localize pipeline disturbance with great precision. Furthermore pipeline owner/operators lay fiber optic cable parallel to transmission pipelines for telecommunication purposes and at minimum additional cost monitoring capabilities can be added to the communication system. The Brillouin-based Omnisens DITEST monitoring system has been used in several long distance pipeline projects. The technique is capable of measuring strain and temperature over 100's kilometers with meter spatial resolution. Dedicated fiber optic cables have been developed for continuous strain and temperature monitoring and their deployment along the pipeline has enabled permanent and continuous pipeline ground movement, intrusion and leak detection. This paper presents a description of the fiber optic Brillouin-based DITEST sensing technique, its measurement performance and limits, while addressing future perspectives for pipeline monitoring. The description is supported by case studies and illustrated by field data.

Health and Welfare in Dutch Organic Laying Hens

Directory of Open Access Journals (Sweden)

Monique Bestman

2014-06-01

Full Text Available From 2007–2008, data on animal health and welfare and farm management during rearing and laying periods were collected from 49 flocks of organic laying hens in the Netherlands. Our aim was to investigate how organic egg farms performed in terms of animal health and welfare and which farm factors affected this performance. The flocks in our study were kept on farms with 34 to 25,000 hens (average 9,300 hens. Seventy-one percent of the flocks consisted of ‘silver hybrids’: white hens that lay brown eggs. Fifty-five percent of the flocks were kept in floor-based housing and 45% of the flocks in aviaries. No relation was found between the amount of time spent outdoors during the laying period and mortality at 60 weeks. Flocks that used their outdoor run more intensively had better feather scores. In 40% of the flocks there was mortality caused by predators. The average feed intake was 129 g/day at 30 weeks and 133 g/day at 60 weeks of age. The average percentage of mislaid eggs decreased from three at 30 weeks to two at 60 weeks. The average mortality was 7.8% at 60 weeks. Twenty-five percent of the flocks were not treated for worms in their first 50 weeks. Flubenol© was applied to the flocks that were treated. Ten percent of the flocks followed Flubenol© instructions for use and were wormed five or more times. The other 65% percent were treated irregularly between one and four times. Sixty-eight percent of the flocks showed little or no feather damage, 24% showed moderate damage and 8% showed severe damage. The feather score was better if the hens used the free-range area more intensely, the laying percentage at 60 weeks was higher, and if they were allowed to go outside sooner after arrival on the laying farm. In 69% of the flocks, hens had peck wounds in the vent area: on average this was 18% of the hens. Keel bone deformations were found in all flocks, on average in 21% of the birds. In 78% of the flocks, an average of 13% of the hens

Health and Welfare in Dutch Organic Laying Hens.

Science.gov (United States)

Bestman, Monique; Wagenaar, Jan-Paul

2014-06-20

From 2007-2008, data on animal health and welfare and farm management during rearing and laying periods were collected from 49 flocks of organic laying hens in the Netherlands. Our aim was to investigate how organic egg farms performed in terms of animal health and welfare and which farm factors affected this performance. The flocks in our study were kept on farms with 34 to 25,000 hens (average 9,300 hens). Seventy-one percent of the flocks consisted of 'silver hybrids': white hens that lay brown eggs. Fifty-five percent of the flocks were kept in floor-based housing and 45% of the flocks in aviaries. No relation was found between the amount of time spent outdoors during the laying period and mortality at 60 weeks. Flocks that used their outdoor run more intensively had better feather scores. In 40% of the flocks there was mortality caused by predators. The average feed intake was 129 g/day at 30 weeks and 133 g/day at 60 weeks of age. The average percentage of mislaid eggs decreased from three at 30 weeks to two at 60 weeks. The average mortality was 7.8% at 60 weeks. Twenty-five percent of the flocks were not treated for worms in their first 50 weeks. Flubenol(©) was applied to the flocks that were treated. Ten percent of the flocks followed Flubenol(©) instructions for use and were wormed five or more times. The other 65% percent were treated irregularly between one and four times. Sixty-eight percent of the flocks showed little or no feather damage, 24% showed moderate damage and 8% showed severe damage. The feather score was better if the hens used the free-range area more intensely, the laying percentage at 60 weeks was higher, and if they were allowed to go outside sooner after arrival on the laying farm. In 69% of the flocks, hens had peck wounds in the vent area: on average this was 18% of the hens. Keel bone deformations were found in all flocks, on average in 21% of the birds. In 78% of the flocks, an average of 13% of the hens had foot-sole wounds

Laying hens behave differently in artificially and naturally sourced ammoniated environments.

Science.gov (United States)

Pokharel, B B; Dos Santos, V M; Wood, D; Van Heyst, B; Harlander-Matauschek, A

2017-12-01

Laying hens are chronically exposed to high levels of ammonia (NH3), one of the most abundant aerial pollutants in poultry houses. Tests for aversion to NH3 in laying hens have used artificially sourced NH3/air mixtures (i.e., from a gas cylinder) showing that birds prefer fresh air to NH3. However, artificially sourced NH3/air mixtures may not accurately reflect barn air conditions, where manure emits a variety of gases. Herein, we investigated whether laying hens differentiate between artificially and naturally sourced NH3/air mixtures and how exposure to NH3 affects foraging and aversive behavior. A total of 20 laying hens was exposed to artificially sourced [A] (from an anhydrous NH3 cylinder) and naturally sourced [N] (from conspecific laying hen excreta) gas mixtures. Hens were exposed to A and N mixtures with NH3 concentrations of 25 and 45 ppm, as well as fresh air [FA]. During the experiment, all birds were exposed to each treatment 3 times using a custom-built polycarbonate chamber, containing a foraging area (containing raisins, mealworms, and feed mix) and a gas delivery system. All testing sessions were video recorded, analyzed with INTERACT® software, and subjected to a GLIMMIX procedure in SAS. Our results showed that the laying hens spent less time foraging overall (P hens were more likely to forage for a longer time (with fewer interruptions) in N than in A treatments (P hens also reacted with greater aversion towards treatment A compared to treatment N (P hens of our study preferred fresh to ammoniated air and that they behaved differently in artificially and naturally sourced NH3/air mixtures, possibly due to the presence of familiar stimuli from the excreta. These findings have implications for new developments in methodological approaches for behavioral testing and for recommendations regarding NH3 levels inside poultry barns. © 2017 Poultry Science Association Inc.

Lay belief in biopolitics and political prejudice

NARCIS (Netherlands)

Suhay, E; Brandt, M.J.; Proulx, T.

2017-01-01

Building on psychological research linking essentialist beliefs about human differences with prejudice, we test whether lay belief in the biological basis of political ideology is associated with political intolerance and social avoidance. In two studies of American adults (Study 1: N = 288, Study

The influence of lay-up and thickness on composite impact damage and compression strength

Science.gov (United States)

Guynn, E. G.; Obrien, T. K.

1985-01-01

The effects of composite stacking sequence, thickness, and percentage of zero-degree plies on the size, shape, and distribution of delamination through the laminate thickness and on residual compression strength following impact were studied. Graphite/epoxy laminates were impacted with an 0.5 inch diameter aluminum sphere at a specific low or high velocity. Impact damage was measured nondestructively by ultrasonic C-scans and X-radiography and destructively by the deply technique, and compression strength tests were performed. It was found that differences in compression failure strain due to stacking sequence were small, while laminates with very low percentages of zero-degree plies had similar failure loads but higher failure strains than laminates with higher percentages of zero-degree plies. Failure strain did not correlate with planar impact damage area, and delaminations in impact regions were associated with matrix cracking.

Lay theories of suicide among Austrian psychology undergraduates.

Science.gov (United States)

Voracek, Martin; Loibl, Lisa Mariella; Lester, David

2007-01-01

Lester and Bean's (1992) Attribution of Causes to Suicide Scale gauges lay theories of suicide including intrapsychic problems, interpersonal conflicts, and societal forces as causes. Results obtained with its German form (n=165 Austrian psychology undergraduates) showed no sex differences and no social-desirability effects. Intriguingly, all three subscales were moderately intercorrelated, thereby indicating respondents' general agreement (or disagreement) with all three theories. Thus, the critical dimension of lay theories of suicide appears to be the belief that suicide has definite causes (regardless of type) versus that it is without causes (unpredictable). In addition, religiosity was positively associated (and overall knowledge about suicide negatively associated) with belief in intrapsychic causes, whereas liberal political views were negatively associated with belief in interpersonal causes.

Comparative Transcriptomics Reveals Jasmonic Acid-Associated Metabolism Related to Cotton Fiber Initiation.

Directory of Open Access Journals (Sweden)

Liman Wang

Full Text Available Analysis of mutants and gene expression patterns provides a powerful approach for investigating genes involved in key stages of plant fiber development. In this study, lintless-fuzzless XinWX and linted-fuzzless XinFLM with a single genetic locus difference for lint were used to identify differentially expressed genes. Scanning electron microscopy showed fiber initiation in XinFLM at 0 days post anthesis (DPA. Fiber transcriptional profiling of the lines at three initiation developmental stages (-1, 0, 1 DPA was performed using an oligonucleotide microarray. Loop comparisons of the differentially expressed genes within and between the lines was carried out, and functional classification and enrichment analysis showed that gene expression patterns during fiber initiation were heavily associated with hormone metabolism, transcription factor regulation, lipid transport, and asparagine biosynthetic processes, as previously reported. Further, four members of the allene-oxide cyclase (AOC family that function in jasmonate biosynthesis were parallel up-regulation in fiber initiation, especially at -1 DPA, compared to other tissues and organs in linted-fuzzed TM-1. Real time-quantitative PCR (RT-qPCR analysis in different fiber mutant lines revealed that AOCs were up-regulated higher at -1 DPA in lintless-fuzzless than that in linted-fuzzless and linted-fuzzed materials, and transcription of the AOCs was increased under jasmonic acid (JA treatment. Expression analysis of JA biosynthesis-associated genes between XinWX and XinFLM showed that they were up-regulated during fiber initiation in the fuzzless-lintless mutant. Taken together, jasmonic acid-associated metabolism was related to cotton fiber initiation. Parallel up-regulation of AOCs expression may be important for normal fiber initiation development, while overproduction of AOCs might disrupt normal fiber development.

Egg quality and yolk lipid composition of laying hens fed diets containing cashew nut meal

Directory of Open Access Journals (Sweden)

Tatiana Fontoura Vidal

2013-03-01

Full Text Available The objective of this study was to assess the effect of the addition of cashew nuts meal (0, 5, 10, 15, 20, and 25% to laying hen diets on egg quality and yolk composition. The variables studied were: egg weight, specific gravity, Haugh Units, percentages of shell, albumen, and yolk, moisture, total solids, total lipids, fatty acids profile, and yolk cholesterol. The addition of up to 25% of cashew nuts meal to hen diets did not affect egg quality and freshness, moisture and total solids content. However, an increase in total lipid content and a decrease in yolk pigmentation was observed. Oleic acid level increased in the yolk, whereas palmitic, stearic, and linoleic acid levels decreased. The addition of cashew nuts meal increased the monounsaturated/saturated fatty acid ratio in the yolk and reduced the cholesterol content. Therefore, the use of cashew nuts meal in laying hen diets favorably modifies the fatty acid composition of egg yolk and contributes to a better acceptance of this food by consumers since it also reduces yolk cholesterol levels.

Advanced specialty fiber designs for high power fiber lasers

Science.gov (United States)

Gu, Guancheng

deviation from circular fiber outer shape may be an effective method to mitigate HOM loss reduction from coherent reflection from fiber outer boundary. In an all-solid photonic bandgap fiber, modes are only guided due to anti-resonance of cladding photonic crystal lattice. This provides strongly mode-dependent guidance, leading to very high differential mode losses, which is essential for lasing far from the gain peak and suppression of stimulated Raman scattering. We will show that all-solid photonic bandgap fibers with effective mode area of 920microm2 can be made with excellent higher order mode suppression. We then demonstrate a 50microm-core-diameter Yb-doped all-solid photonic bandgap fiber laser. 75W output power has been generated with a diffraction-limited beam and an efficiency of 70% relative to the launched pump power. We have also experimentally confirmed that a robust single-mode regime exists near the high frequency edge of the bandgap. It is well known that incorporation of additional smaller cores in the cladding can be used to resonantly out-couple higher-order modes from a main core to suppress higher-order-mode propagation in the main core. Using a novel design with multiple coupled smaller cores in the cladding, we further scaled up the mode area and have successfully demonstrated a single-mode photonic bandgap fiber with record effective mode area of 2650microm2. Detailed numeric studies have been conducted for multiple cladding designs. For the optimal designs, the simulated minimum higher-order-mode losses are well over two orders of magnitudes higher than that of fundamental mode when expressed in dBs. We have also experimentally validated one of the designs. M 2critical for tandem-pumping in >10kW fiber lasers to provide high pump brightness and low thermal loading. Using an ytterbium-doped-phosphosilicate double-clad leakage-channel fiber with 50microm core and 420microm cladding, we have achieved 70% optical-to-optical efficiency at 1018nm. The

Behaviour of reinforced concrete slabs with steel fibers

Science.gov (United States)

Baarimah, A. O.; Syed Mohsin, S. M.

2017-11-01

This paper investigates the potential effect of steel fiber added into reinforced concrete slabs. Four-point bending test is conducted on six slabs to investigate the structural behaviour of the slabs by considering two different parameters; (i) thickness of slab (ii) volume fraction of steel fiber. The experimental work consists of six slabs, in which three slabs are designed in accordance to Eurocode 2 to fulfil shear capacity characteristic, whereas, the other three slabs are designed with 17% less thickness, intended to fail in shear. Both series of slabs are added with steel fiber with a volume fraction of Vf = 0%, Vf = 1% and Vf = 2% in order to study the effect and potential of fiber to compensate the loss in shear capacity. The slab with Vf = 0% steel fiber and no reduction in thickness is taken as the control slab. The experimental result suggests promising improvement of the load carrying capacity (up to 32%) and ductility (up to 87%) as well as delayed in crack propagation for the slabs with Vf = 2%. In addition, it is observed that addition of fibers compensates the reduction in the slab thickness as well as changes the failure mode of the slab from brittle to a more ductile manner.

Visible and near infrared up-conversion luminescence in Yb3+/Tm3+ co-doped yttria-alumino-silicate glass based optical fibers

International Nuclear Information System (INIS)

Halder, Arindam; Chandra Paul, Mukul; Wadi Harun, Sulaiman; Kumar Bhadra, Shyamal; Bysakh, Sandip; Das, Shyamal; Pal, Mrinmay

2013-01-01

We report blue light up-conversion (UC) emission in Yb–Tm co-doped nano-phase separated yttria-alumino-silicate (YAS) glass based D-shaped with low-index cladding optical fibers. Y 2 O 3 creates an environment of nano structured YAS glass phases with Yb and Tm rich zone into the core glass which confirmed from TEM analyses. This kind of glass host assists in distributing of Yb and Tm rich zone uniformly throughout the core region. Yb and Tm doped regions exist mainly into nano YAS phases, defined as RE rich nano YAS-RE phases. All samples exhibit UC luminescence peaks at 483 nm, 650 nm and 817 nm for Tm 3+ and 1044 nm for Yb 3+ under excitation by 975 nm laser light. In such type of nano-engineered glass–ceramic based host, almost all the Yb ions transferred its energy to the nearer Tm ions. In particular 483 nm emission is attributed to 1 G 4 → 3 H 6 transition through a three step resonance energy transfer (ET) from excited Yb 3+ . The highest emission intensity is obtained with a concentration of 0.5 wt% Tm 3+ and 2.0 wt% Yb 3+ . The ET between Yb 3+ and Tm 3+ is increased with increase of Yb 3+ concentration with respect to Tm 3+ . The experimental fluorescence life-times of Tm 3+ upconversion emission at visible wavelengths into such kind of fiber is reported under 975 nm pump excitation. The present study is important for development of an efficient tunable 483 nm fluorescence light source. -- Highlights: • We report nano-phase separated YAS glass host based Yb–Tm co-doped optical fibers. • Almost all the Yb transferred its energy to the neighboring Tm ions. • We report strong UC luminescence peaks at 483 nm and 817 nm wavelengths. • We report third ET coefficient as 1.6723 Hz for such kind of Yb–Tm codoped fiber. • We report suitable fiber as an efficient tunable 483 nm fluorescence light source

Effect of Dietary Supplementation of Red Ginseng By-product on Laying Performance, Blood Biochemistry, Serum Immunoglobulin and Microbial Population in Laying Hens.

Science.gov (United States)

Kang, H K; Park, S-B; Kim, C H

2016-10-01

This study was carried out to investigate the effect of dietary supplementation of red ginseng by-product (RGB) on the laying performance, blood biochemistry, and microbial population in laying hens. A total of 120 Hy-Line Brown laying hens (75 weeks old) were randomly allotted to 1 of 3 dietary treatments with 4 replicates per treatment. A commercial-type basal diet was prepared, and 2 additional diets were prepared by supplementing 5.0 or 10.0 g/kg of RGB to the basal diet at the expense of corn. The diets were fed to hens on an ad libitum basis for 4 weeks. There were no differences in feed intake, egg weight, and feed conversion ratio during 4 weeks of the feeding trial. However, hen-day egg production was significantly greater (p<0.05) for the RGB treatment groups than that for the basal treatment group. There were no differences in triglyceride, aspartate aminotransferase, and alanine aminotransferase during the 4-week feeding trial. However, RGB supplementation increased (p<0.05) the serum immunoglobulin G (IgG) and IgM content compared with basal treatment group. The total cholesterol was lower (p<0.05) in the RGB treatments groups than that in the basal treatment group. The intestinal Lactobacillus population was greater (p<0.05) for the RGB treatments groups than that for the basal treatment group. However, the numbers of Salmonella and Escherichia coli were not different among dietary treatments. During the entire experiment, there was no significant difference in egg quality among all the treatments. In conclusion, in addition to improving hen-day production, there were positive effects of dietary RGB supplementation on serum immunoglobulin and cholesterol levels in laying hens.

Dry Process for Manufacturing Hybridized Boron Fiber/Carbon Fiber Thermoplastic Composite Materials from a Solution Coated Precursor

Science.gov (United States)

Belvin, Harry L. (Inventor); Cano, Roberto J. (Inventor)

2003-01-01

An apparatus for producing a hybrid boron reinforced polymer matrix composite from precursor tape and a linear array of boron fibers. The boron fibers are applied onto the precursor tapes and the precursor tape processed within a processing component having an impregnation bar assembly. After passing through variable-dimension forming nip-rollers, the precursor tape with the boron fibers becomes a hybrid boron reinforced polymer matrix composite. A driving mechanism is used to pulled the precursor tape through the method and a take-up spool is used to collect the formed hybrid boron reinforced polymer matrix composite.

Specific characteristics of the aviary housing system affect plumage condition, mortality and production in laying hens

NARCIS (Netherlands)

Heerkens, J.L.T.; Delezie, Evelyne; Kempen, Ine; Zoons, Johan; Ampe, Bart; Rodenburg, T.B.; Tuyttens, F.A.M.

2015-01-01

Feather pecking and high mortality levels are significant welfare problems in non-cage housing systems for laying hens. The aim of this study was to identify husbandry-related risk factors for feather damage, mortality, and egg laying performance in laying hens housed in the multi-tier non-cage

Practitioner and lay perspectives of the service provision of nutrition information leaflets in primary care.

Science.gov (United States)

McClinchy, Jane; Dickinson, Angela; Barron, Duncan; Thomas, Hilary

2011-12-01

In primary care, leaflets are often used to communicate health information. Increasingly, primary healthcare practitioners need to provide dietary advice. There is limited research exploring how nutrition information leaflets are used in primary care. The present study explored practitioner and lay experiences with respect to providing and receiving nutrition information in primary care, focusing in particular on the use of leaflets for nutrition information. A qualitative design was used incorporating focus groups with 57 practitioners based at seven general practitioner practices and a purposive sample of 30 lay participants attending six Consumer Health Organisations within one primary care trust. Focus groups were taped and transcribed verbatim and data were analysed thematically, assisted by computer software n6® (QSR International Pty Ltd, Melbourne, Australia). Practitioners discussed barriers to giving nutritional advice, access to leaflets, lay receptiveness to advice and their perceptions about the value of leaflets to lay people. Food was not considered in terms of its nutritional components by lay participants and the need for nutritional information was not perceived to be relevant until they had received a medical diagnosis. Lay participants discussed the importance of receiving nutritional advice relating to their medical diagnosis and the altered status of written information that was delivered personally. Practitioner and lay groups suggested improvements to ensure that nutritional advice be supported by relevant and appropriate written information. This research has underlined the continuing importance of nutrition information leaflets and concludes that there is particular value in involving lay participants in the development of nutrition information leaflets. © 2011 The Authors. Journal of Human Nutrition and Dietetics © 2011 The British Dietetic Association Ltd.

[Structural change of the corpus callosum fibers in toddlers with autism spectrum disorder: two-year follow-up].

Science.gov (United States)

Chang, C; Qiu, N N; Xiao, T; Xiao, X; Chu, K K; Li, Y; Wu, Q R; Fang, H; Ke, X Y

2017-12-02

Objective: To conduct a follow-up investigation of structural changes of the corpus callosum fibers of toddlers (2 to 5 years of age) with autism spectrum disorder(ASD) and to explore the associations with clinical symptoms. Method: In this prospective randomized controlled study, ASD children who were diagnosed in the Child Mental Health Research Center, Nanjing Brain Hospital Affiliated to Nanjing Medical University from May 2011 to November 2012 were included in the ASD group, and developmentally delayed children were included in the control group (DD group). Diffusion tensor imaging (DTI) data from the two groups were obtained at two age levels: 2-3 years of age, and 4-5 years of age. Region of interest analysis was applied to assess characteristic values of total area and sub-regions of corpus callosum: the fraction anisotropy (FA), the mean diffusivity (MD), the radial diffusivity (RD) and the axial diffusivity (AD). All children were assessed using the Autism Diagnostic Interview-Revised (ADI-R) and Autism Treatment Evaluation Checklist (ATEC). The characteristic values of total area and sub-regions of corpus callosum of ASD group at two age levels were analyzed by paired sample t test; the characteristic values of total area and sub-regions of corpus callosum of ASD group and DD group were analyzed by independent-sample t test; the correlations between FA values of the total area and sub-regions of corpus callosum and ADI-R or ATEC scores were analyzed by Pearson correlation analysis. Result: Forty cases meeting inclusion criteria were enrolled in ASD group, and 31 eligible cases were enrolled in the control group. Four children in the ASD group were lost to follow-up, and 5 children in the control group were lost to follow-up. Longitudinal comparison between the two age subgroups of ASD patients showed that the FA values of the total corpus callosum increased (0.499 55±0.027 59 vs . 0.505 83±0.086 64, t= 4.88, P 0.05 for all comparisons); as compared

Teaching in Catholic Schools from the Perspectives of Lay Teachers, 1940-1980

Science.gov (United States)

Cloud, Natalie

2017-01-01

This paper seeks to address a gap in the literature regarding lay teachers and their role and status within Catholic schools, studies have been carried out investigating this from the perspective of teaching religious and the Catholic Church but have yet to fully investigate this from the lay teachers' perspectives themselves. The period 1940-1980…

Optical and mechanical excitation thermography for impact response in basalt-carbon hybrid fiber-reinforced composite laminates

OpenAIRE

Zhang, Hai; Sfarra, Stefano; Sarasini, Fabrizio; Ibarra-Castanedo, Clemente; Perilli, Stefano; Fernandes, Henrique; Duan, Yuxia; Peeters, Jeroen; Avelidis, Nicholas P; Maldague, Xavier

2017-01-01

Abstract: In this paper, optical and mechanical excitation thermography were used to investigate basalt fiber reinforced polymer (BFRP), carbon fiber reinforced polymer (CFRP) and basalt-carbon fiber hybrid specimens subjected to impact loading. Interestingly, two different hybrid structures including sandwich-like and intercalated stacking sequence were used. Pulsed phase thermography (PPT), principal component thermography (PCT) and partial least squares thermography (PLST) were used to pro...

Optimizing lay counsellor services for chronic care in South Africa: a qualitative systematic review.

Science.gov (United States)

Petersen, Inge; Fairall, Lara; Egbe, Catherine O; Bhana, Arvin

2014-05-01

To conduct a qualitative systematic review on the use of lay counsellors in South Africa to provide lessons on optimizing their use for psychological and behavioural change counselling for chronic long-term care in scare-resource contexts. A qualitative systematic review of the literature on lay counsellor services in South Africa. Twenty-nine studies met the inclusion criteria. Five randomized control trials and two cohort studies reported that lay counsellors can provide behaviour change counselling with good outcomes. One multi-centre cohort study provided promising evidence of improved anti-retroviral treatment adherence and one non-randomized controlled study provided promising results for counselling for depression. Six studies found low fidelity of lay counsellor-delivered interventions in routine care. Reasons for low fidelity include poor role definition, inconsistent remuneration, lack of standardized training, and poor supervision and logistical support. Within resource-constrained settings, adjunct behaviour change and psychological services provided by lay counsellors can be harnessed to promote chronic care at primary health care level. Optimizing lay counsellor services requires interventions at an organizational level that provide a clear role definition and scope of practice; in-service training and formal supervision; and sensitization of health managers to the importance and logistical requirements of counselling. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Ketahanan Bending Komposit Hybrid Serat Batang Kelapa/Serat Gelas Dengan Matrik Urea Formaldehyde

Directory of Open Access Journals (Sweden)

Nasmi Herlina Sari

2012-11-01

Full Text Available The composite has its own advantages compared to other alternative techniques such material is strong, lightweight,corrosion-resistant, economical and so on. The purpose of this study was to investigate the characteristics of bending strengthfiber composite hybrid coconut trunk / fiber glass using urea formaldehyde resin.Hybrid palm trunk fiber /glass fiber composite have been made by hand lay up which volume fraction fiber hybridvariation namely 10:20, 15:15 and 20:10 (% with length fiber 2 cm. Every Tests conducted were bending testing with eachvariation performed three times repetition. Bending test specimens in accordance with standard ASTMD 790.The results of bending strength of palm trunk fiber hybrid composite / fiber-glass with random fiber direction that thehighest bending strength in the palm trunk fiber volume fraction 10% and 20% glass fiber that is 22.7 N/mm2.

Fiber optic components compatibility with the PWR containment radiation field

International Nuclear Information System (INIS)

Breuze, G.; Serre, J.

1990-01-01

Present and future applications of fiber optics transmission in the nuclear industrial field are emphasized. Nuclear acceptance criteria for relevant electronic equipments in terms of radiation dose rate, integrated dose and required reliability are given. Ambient conditions of PWR containment are especially considered in the present paper. Experimental results of optical fibers and end-components exposed to 60 Co gamma rays are successively shown. Main radiation response characteristics up to 10 4 Gy (with dose rates of about 100 Gy.h -1 ) of both multimodal fiber families (step index and gradient index fibers) are compared. Predominant features of pure silica core fibers are: * an efficient photobleaching with near IR light from LED and LD commonly used in transmission data links, * a radiation hardening reducing induced losses down to 10 dB.km -1 in fine fibers up to date with latest developments. Dose rate effect on induced losses is also outlined for these fibers. Optoelectronic fiber-end components radiation response is good only for special LED (AsGa) and PD (Si). Radiation behavior of complex pigtailed LDM (laser diode + photodiode + Peltier element + thermistor) is not fully acceptable and technological improvements were made. Preliminary results are given. Two applications of fiber links transmitting data in a PWR containment and a hot cell are described. Hardening levels obtained and means required are given

Lay theory of race affects and moderates Asian Americans' responses toward American culture.

Science.gov (United States)

No, Sun; Hong, Ying-yi; Liao, Hsin-Ya; Lee, Kyoungmi; Wood, Dustin; Chao, Melody Manchi

2008-10-01

People may hold different understandings of race that might affect how they respond to the culture of groups deemed to be racially distinct. The present research tests how this process is moderated by the minority individual's lay theory of race. An essentialist lay theory of race (i.e., that race reflects deep-seated, inalterable essence and is indicative of traits and ability) would orient racial minorities to rigidly adhere to their ethnic culture, whereas a social constructionist lay theory of race (i.e., that race is socially constructed, malleable, and arbitrary) would orient racial minorities to identify and cognitively assimilate toward the majority culture. To test these predictions, the authors conducted 4 studies with Asian American participants. The first 2 studies examine the effect of one's lay theory of race on perceived racial differences and identification with American culture. The last 2 studies tested the moderating effect of lay theory of race on identification and assimilation toward the majority American culture after this culture had been primed. The results generally supported the prediction that the social constructionist theory was associated with more perceived similarity between Asians and Americans and more consistent identification and assimilation toward American culture, compared with the essentialist theory.

Deposition of melamine in eggs from laying hens exposed to melamine contaminated feed.

Science.gov (United States)

Chen, Yiqiang; Yang, Wenjun; Wang, Zongyi; Peng, Yong; Li, Bin; Zhang, Liying; Gong, Limin

2010-03-24

The deposition profile of melamine was studied in eggs obtained from laying hens fed melamine contaminated feed. A total of 180 laying hens were divided into five groups and were fed diets spiked with 0, 5, 25, 50, or 100 mg of melamine per kg of feed. Eggs collected on days 1, 3, 5, 7, 9, 11, 13, and 15 were analyzed by a gas chromatography-mass spectrometry method, which was fully validated for melamine analysis prior to use. For each treatment group, the melamine level in the eggs was similar from day 1 to day 15 (P > 0.05), suggesting that laying hens did not accumulate melamine for later deposition in eggs. The average melamine concentrations in eggs were 0.00 (below limit of detection), 0.16, 0.47, 0.84, and 1.48 mg/kg for the 0, 5, 25, 50, and 100 mg/kg treatment groups, respectively, which demonstrated an apparent dose-response relationship, and a safety threshold of 164 mg/kg melamine in the feed of laying hen was estimated when a maximum tolerance level of 2.5 mg/kg melamine in egg was adopted. These results provide a scientific basis for the risk assessment of melamine in feeds fed to laying hens.

Stimulated Brillouin scattering threshold in fiber amplifiers

International Nuclear Information System (INIS)

Liang Liping; Chang Liping

2011-01-01

Based on the wave coupling theory and the evolution model of the critical pump power (or Brillouin threshold) for stimulated Brillouin scattering (SBS) in double-clad fiber amplifiers, the influence of signal bandwidth, fiber-core diameter and amplifier gain on SBS threshold is simulated theoretically. And experimental measurements of SBS are presented in ytterbium-doped double-clad fiber amplifiers with single-frequency hundred nanosecond pulse amplification. Under different input signal pulses, the forward amplified pulse distortion is observed when the pulse energy is up to 660 nJ and the peak power is up to 3.3 W in the pulse amplification with pulse duration of 200 ns and repetition rate of 1 Hz. And the backward SBS narrow pulse appears. The pulse peak power equals to SBS threshold. Good agreement is shown between the modeled and experimental data. (authors)