WorldWideScience

Sample records for femtosecond thz studies

  1. Characterizing THz Coherent Synchrotron Radiation at Femtosecond Linear Accelerator

    Institute of Scientific and Technical Information of China (English)

    LIN Xu-Ling; ZHANG Jian-Bing; LU YU; LUO Feng; LU Shan-Liang; YU Tie-Min; DAI Zhi-Min

    2009-01-01

    The generation and observation of coherent THz synchrotron radiation from femtosecond electron bunches in the Shanghai Institute of Applied Physics femtosecond accelerator device is reported.We describe the experiment setup and present the first result of THz radiation properties such as power and spectrum.

  2. Generation of efficient THz radiation by optical rectification in DAST crystal using tunable femtosecond laser pulses

    Science.gov (United States)

    Venkatesh, Mottamchetty; Thirupugalmani, K.; Rao, K. S.; Brahadeeswaran, S.; Chaudhary, A. K.

    2017-03-01

    We report the efficient THz generation by optical rectification from an indigenously grown organic DAST crystal using the 140 fs oscillator laser pulses tunable in between 780 and 850 nm. The generated THz pulse profile and powers have been measured using the photoconductive (PC) antennas and pyroelectric detector, respectively. The highest THz peak amplitude and power is obtained at 825 nm central wavelength. We have theoretically explained the enhancement of THz radiation based on the matching of average optical group refractive index and average THz refractive index of the DAST crystal at 825 nm. In addition, the dependence of THz peak amplitude and THz power on laser power have been carried out. The measured quantum conversion efficiency (QCE) of 0.5 and 1.5 THz bands are of the order 3.7 × 10-3, 1.4 × 10-3, respectively. Finally, an attempt has been made to study the effect of polarizations on generated THz signal.

  3. Spectral-temporal encoding and decoding of the femtosecond pulses sequences with a THz repetition rate

    Science.gov (United States)

    Tcypkin, A. N.; Putilin, S. E.

    2017-01-01

    Experimental and numerical modeling techniques demonstrated the possibilities of the spectral-time encoding and decoding for time division multiplexing sequence of femtosecond subpulses with a repetition rate of up to 6.4 THz. The sequence was formed as a result of the interference of two phase-modulated pulses. We report the limits of the application of the developed method of controlling formed sequence at the spectral-temporal coding.

  4. A Study of Electron and Phonon Dynamics by Broadband Two-Dimensional THz Time-Domain Spectroscopy

    Science.gov (United States)

    Fu, Zhengping

    Terahertz (THz) wave interacts with semiconductors in many ways, such as resonant excitation of lattice vibration, intraband transition and polaron formation. Different from the optical waves, THz wave has lower photon energy (1 THz = 4.14 meV) and is suitable for studying dynamics of low-energy excitations. Recently the studies of the interaction of THz wave and semiconductors have been extending from the linear regime to the nonlinear regime, owing to the advance of the high-intensity THz generation and detection methods. Two-dimensional (2D) spectroscopy, as a useful tool to unravel the nonlinearity of materials, has been well developed in nuclear magnetic resonance and infrared region. However, the counterpart in THz region has not been well developed and was only demonstrated at frequency around 20 THz due to the lack of intense broadband THz sources. Using laser-induced plasma as the THz source, we developed collinear broadband 2D THz time-domain spectroscopy covering from 0.5 THz to 20 THz. Broadband intense THz pulses emitted from laser-induced plasma provide access to a variety of nonlinear properties of materials. Ultrafast optical and THz pulses make it possible to resolve the transient change of the material properties with temporal resolution of tens of femtoseconds. This thesis focuses on the linear and nonlinear interaction of the THz wave with semiconductors. Since a great many physical processes, including vibrational motion of lattice and plasma oscillation, has resonant frequency in the THz range, rich physics can be studies in our experiment. The thesis starts from the linear interaction of the THz wave with semiconductors. In the narrow band gap semiconductor InSb, the plasma absorption edge, Restrahlen band and dispersion of polaritons are observed. The nonlinear response of InSb in high THz field is verified in the frequency-resolved THz Z-scan experiment. The third harmonic generations due to the anharmonicity of plasma oscillation and the

  5. A Multi-Channel THz and Infrared Spectrometer for Femtosecond Electron Bunch Diagnostics by Single-Shot Spectroscopy of Coherent Radiation

    CERN Document Server

    Wesch, S; Behrens, C; Delsim-Hashemi, H; Schmüser, P

    2011-01-01

    The high peak current required in free-electron lasers (FELs) is realized by longitudinal compression of the electron bunches to sub-picosecond length. In this paper, a frequency-domain diagnostic method is described that is capable of resolving structures in the femtosecond regime. A novel in-vacuum spectrometer has been developed for spectroscopy of coherent radiation in the THz and infrared range. The spectrometer is equipped with five consecutive dispersion gratings and 120 parallel readout channels; it can be operated either in short wavelength mode (5 - 44 um) or in long wavelength mode (45 - 430 um). Fast parallel readout permits the spectroscopy of coherent radiation from single electron bunches. Test measurements at the soft X-ray free-electron laser FLASH, using coherent transition radiation, demonstrate excellent performance of the spectrometer. The high sensitivity down to a few micrometers allows study of short bunch features caused for example by microbunching effects in magnetic chicanes. The d...

  6. Femtosecond THz time domain spectroscopy at 36 kHz scan rate using an acousto-optic delay

    CERN Document Server

    Urbanek, B; Eisele, M; Baierl, S; Kaplan, D; Lange, C; Huber, R

    2016-01-01

    We present a rapid-scan, time-domain terahertz spectrometer employing femtosecond Er:fiber technology and an acousto-optic delay with attosecond precision, enabling scanning of terahertz transients over a 12.4 ps time window at a waveform refresh rate of 36 kHz, and a signal-to-noise ratio of $1.7 \\times 10^5/\\sqrt{\\rm Hz}$. Our approach enables real-time monitoring of dynamic THz processes at unprecedented speeds, which we demonstrate through rapid 2D thickness mapping of a spinning teflon disc at a precision of $10\\,\\rm nm/\\sqrt{\\rm Hz}$. The compact, all-optical design ensures alignment-free operation even in harsh environments.

  7. A multi-channel THz and infrared spectrometer for femtosecond electron bunch diagnostics by single-shot spectroscopy of coherent radiation

    Energy Technology Data Exchange (ETDEWEB)

    Wesch, Stephan; Schmidt, Bernhard; Behrens, Christopher; Delsim-Hashemi, Hossein; Schmueser, Peter

    2011-08-15

    The high peak current required in free-electron lasers (FELs) is realized by longitudinal compression of the electron bunches to sub-picosecond length. In this paper, a frequency-domain diagnostic method is described that is capable of resolving structures in the femtosecond regime. A novel in-vacuum spectrometer has been developed for spectroscopy of coherent radiation in the THz and infrared range. The spectrometer is equipped with five consecutive dispersion gratings and 120 parallel readout channels; it can be operated either in short wavelength mode (5-44 {mu}m) or in long wavelength mode (45-430 {mu}m). Fast parallel readout permits the spectroscopy of coherent radiation from single electron bunches. Test measurements at the soft X-ray free-electron laser FLASH, using coherent transition radiation, demonstrate excellent performance of the spectrometer. The high sensitivity down to a few micrometers allows study of short bunch features caused for example by microbunching e ects in magnetic chicanes. The device is planned for use as an online bunch profile monitor during regular FEL operation. (orig.)

  8. Time-resolved THz studies of carrier dynamics in semiconductors, superconductors, and strongly-correlated electron materials

    Energy Technology Data Exchange (ETDEWEB)

    Kaindl, Robert A.; Averitt, Richard D.

    2006-11-14

    materials occur at lower energies. The terahertz (THz) regime is particularly rich in such fundamental resonances. This includes ubiquitous lattice vibrations and low-energy collective oscillations of conduction charges. In nanoscale materials, band structure quantization also yields novel infrared and THz transitions, including intersubband absorption in quantum wells. The formation of excitons in turn leads to low-energy excitations analogous to inter-level transitions in atoms. In transition-metal oxides, fundamental excitation gaps arise from charge pairing into superconducting condensates and other correlated states. This motivates the use of ultrafast THz spectroscopy as a powerful tool to study light-matter interactions and microscopic processes in nanoscale and correlated-electron materials.A distinct advantage of coherent THz pulses is that the amplitude and phase of the electric field can be measured directly, as the THz fields are coherent with the fs pulses from which they are generated. Using THz time-domain spectroscopy (THz-TDS), both the real and imaginary parts of the response functions (such as the dielectric function) are obtained directly without the need for Kramers?Kronig transforms. The THz response can also be expressed in terms of absorption and refractive index, or as the optical conductivity. The optical conductivity describes the current response of a many-body system to an electric field, an ideal tool to study conducting systems. A second important advantage is the ultrafast time resolution that results from the short temporal duration of the THz time-domain sources. In particular, optical-pump THz-probe spectroscopy enables a delicate probe of the transient THz conductivity after optical photoexcitation. These experiments can provide insight into quasiparticle interactions, phase transitions, or nonequilibrium dynamics. In this chapter we will provide many such examples. Since THz spectroscopy of solids is a quickly expanding field

  9. Femtosecond optical studies of cuprates

    Science.gov (United States)

    Schneider, Michael L.; Rast, S.; Onellion, Marshall; Demsar, Jure; Taylor, Antoinette J.; Glinka, Yu D.; Tolk, Norman H.; Ren, Yuhang; Luepke, Gunter; Klimov, A.; Xu, Ying; Sobolewski, Roman; Si, Weidong; Zeng, X. H.; Soukiassian, A.; Xi, Xiaoxing; Abrecht, M.; Ariosa, Daniel; Pavuna, Davor; Manzke, Recardo; Printz, J. O.; Parkhurst, D. K.; Downum, K. E.; Guptasarma, P.; Bozovic, Ivan

    2002-11-01

    Femtosecond optical reflectivity measurements of La2-xSrxCuO4, La2CuO4+y, Bi2Sr2CuO6+z and Bi2Sr2CaCu2O8+δ thin films and single crystal samples indicate qualitative changes with fluence. At the lowest fluencies, there is a power law divergence in the relaxation time. The divergence has an onset temperature of 55+/-15K, independent of whether the sample is in the superconducting or normal states. At slightly higher fluencies, still perturbative, the additional response does not exhibit this power law divergence. At quite high fluencies- no longer perturbative- the metallic samples exhibit oscillations in the reflectivity amplitude. The period of these oscillations varies with the probe wavelength but not with the pump wavelength. The oscillations exhibit a decay time as long as 10 nsec.

  10. Femtosecond laser studies of ultrafast intramolecular processes

    Energy Technology Data Exchange (ETDEWEB)

    Hayden, C. [Sandia National Laboratories, Livermore, CA (United States)

    1993-12-01

    The goal of this research is to better understand the detailed mechanisms of chemical reactions by observing, directly in time, the dynamics of fundamental chemical processes. In this work femtosecond laser pulses are used to initiate chemical processes and follow the progress of these processes in time. The authors are currently studying ultrafast internal conversion and subsequent intramolecular relaxation in unsaturated hydrocarbons. In addition, the authors are developing nonlinear optical techniques to prepare and monitor the time evolution of specific vibrational motions in ground electronic state molecules.

  11. State-of-the-art exposure chamber for highly controlled and reproducible THz biological effects studies

    Science.gov (United States)

    Cerna, Cesario Z.; Elam, David P.; Echchgadda, Ibtissam; Sloan, Mark A.; Wilmink, Gerald J.

    2014-03-01

    Terahertz (THz) imaging and sensing technologies are increasingly being used at international airports for security screening purposes and at major medical centers for cancer and burn diagnosis. The emergence of new THz applications has directly resulted in an increased interest regarding the biological effects associated with this frequency range. Knowledge of THz biological effects is also desired for the safe use of THz systems, identification of health hazards, and development of empirically-based safety standards. In this study, we developed a state-of-the-art exposure chamber that allowed for highly controlled and reproducible studies of THz biological effects. This innovative system incorporated an industry grade cell incubator system that permitted a highly controlled exposure environment, where temperatures could be maintained at 37 °C +/- 0.1 °C, carbon dioxide (CO2) levels at 5% +/- 0.1%, and relative humidity (RH) levels at 95% +/- 1%. To maximize the THz power transmitted to the cell culture region inside the humid incubator, a secondary custom micro-chamber was fabricated and incorporated into the system. This micro-chamber shields the THz beam from the incubator environment and could be nitrogen-purged to eliminate water absorption effects. Additionally, a microscope that allowed for real-time visualization of the live cells before, during, and after THz exposure was integrated into the exposure system.

  12. Quantitative study of rectangular waveguide behavior in the THz.

    Energy Technology Data Exchange (ETDEWEB)

    Rowen, Adam M.; Nordquist, Christopher Daniel; Wanke, Michael Clement

    2009-10-01

    This report describes our efforts to quantify the behavior of micro-fabricated THz rectangular waveguides on a configurable, robust semiconductor-based platform. These waveguides are an enabling technology for coupling THz radiation directly from or to lasers, mixers, detectors, antennas, and other devices. Traditional waveguides fabricated on semiconductor platforms such as dielectric guides in the infrared or co-planar waveguides in the microwave regions, suffer high absorption and radiative losses in the THz. The former leads to very short propagation lengths, while the latter will lead to unwanted radiation modes and/or crosstalk in integrated devices. This project exploited the initial developments of THz micro-machined rectangular waveguides developed under the THz Grand Challenge Program, but instead of focusing on THz transceiver integration, this project focused on exploring the propagation loss and far-field radiation patterns of the waveguides. During the 9 month duration of this project we were able to reproduce the waveguide loss per unit of length in the waveguides and started to explore how the loss depended on wavelength. We also explored the far-field beam patterns emitted by H-plane horn antennas attached to the waveguides. In the process we learned that the method of measuring the beam patterns has a significant impact on what is actually measured, and this may have an effect on most of the beam patterns of THz that have been reported to date. The beam pattern measurements improved significantly throughout the project, but more refinements of the measurement are required before a definitive determination of the beam-pattern can be made.

  13. Ultrafast low-energy dynamics of graphite studied by nonlinear multi-THz spectroscopy

    Directory of Open Access Journals (Sweden)

    Leitenstorfer A.

    2013-03-01

    Full Text Available Ultraintense few-cycle THz pulses are employed to study the nonlinear response of graphite. A phase sensitive 2D spectroscopy setup is capable of detecting pump-induced transient changes as well as multi-wave mixing processes. The observed strong THz-pump THz-probe signals provide insight into ultrafast dynamics and the spectral response of the low-energy carriers. Here we report the observation of a pump-induced transmission in graphite. The relaxation dynamics shows three distinct time scales, which are assigned to carrier thermalization, phonon emission and a slow cooling down back to equilibrium.

  14. Atmospheric propagation of THz radiation.

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, Michael Clement; Mangan, Michael A.; Foltynowicz, Robert J.

    2005-11-01

    In this investigation, we conduct a literature study of the best experimental and theoretical data available for thin and thick atmospheres on THz radiation propagation from 0.1 to 10 THz. We determined that for thick atmospheres no data exists beyond 450 GHz. For thin atmospheres data exists from 0.35 to 1.2 THz. We were successful in using FASE code with the HITRAN database to simulate the THz transmission spectrum for Mauna Kea from 0.1 to 2 THz. Lastly, we successfully measured the THz transmission spectra of laboratory atmospheres at relative humidities of 18 and 27%. In general, we found that an increase in the water content of the atmosphere led to a decrease in the THz transmission. We identified two potential windows in an Albuquerque atmosphere for THz propagation which were the regions from 1.2 to 1.4 THz and 1.4 to 1.6 THz.

  15. A Pilot Clinical Study to Investigate the Human Whole Blood Spectrum Characteristics in the Sub-THz Region

    CERN Document Server

    Tseng, Tzu-Fang; Gao, Hao-Cheng; Wang, Tzung-Dau; Sun, Chi-Kuang

    2014-01-01

    We have conducted a pilot clinical study to not only investigate the THz spectra of ex-vivo fresh human whole blood of 28 patients following 8-hours fasting guideline, but also to find out the critical blood ingredients of which the concentration dominantly affects those THz spectra. A great difference between the THz absorption properties of human blood among different people was observed, while the difference can be up to ~15% of the averaged absorption coefficient of the 28 samples. Our pilot clinical study indicates that triglyceride and red blood cell were two dominant factors to have significant clinically defined negative correlation to the sub-THz absorption coefficients.

  16. Quenching Plasma Waves in Two Dimensional Electron Gas by a Femtosecond Laser Pulse

    Science.gov (United States)

    Shur, Michael; Rudin, Sergey; Greg Rupper Collaboration; Andrey Muraviev Collaboration

    Plasmonic detectors of terahertz (THz) radiation using the plasma wave excitation in 2D electron gas are capable of detecting ultra short THz pulses. To study the plasma wave propagation and decay, we used femtosecond laser pulses to quench the plasma waves excited by a short THz pulse. The femtosecond laser pulse generates a large concentration of the electron-hole pairs effectively shorting the 2D electron gas channel and dramatically increasing the channel conductance. Immediately after the application of the femtosecond laser pulse, the equivalent circuit of the device reduces to the source and drain contact resistances connected by a short. The total response charge is equal to the integral of the current induced by the THz pulse from the moment of the THz pulse application to the moment of the femtosecond laser pulse application. This current is determined by the plasma wave rectification. Registering the charge as a function of the time delay between the THz and laser pulses allowed us to follow the plasmonic wave decay. We observed the decaying oscillations in a sample with a partially gated channel. The decay depends on the gate bias and reflects the interplay between the gated and ungated plasmons in the device channel. Army Research Office.

  17. Femtosecond photodissociation dynamics of I studied by ion imaging

    DEFF Research Database (Denmark)

    Larsen, J.J.; Bjerre, N.; Mørkbak, N.J.

    1998-01-01

    on imaging is employed to analyze the fragments from timed Coulomb explosion studies of femtosecond (fs) molecular dynamics. The technique provides high detection efficiency and direct recording of the two-dimensional velocity of all ionized fragments. We illustrate the approach by studying photo...... agreement with quantum mechanical wave packet simulations. We discuss the perspectives for extending the studies to photochemical reactions of small polyatomic molecules......on imaging is employed to analyze the fragments from timed Coulomb explosion studies of femtosecond (fs) molecular dynamics. The technique provides high detection efficiency and direct recording of the two-dimensional velocity of all ionized fragments. We illustrate the approach by studying...

  18. Femtosecond Studies of Electrons at Interfaces

    Science.gov (United States)

    Harris, Charles

    2000-03-01

    Binding energies and ultrafast relaxation dynamics of image electrons reflect the nature of the electronic interaction with both the substrate and the adsorbed layer[1,2]. We demonstrate that a positive(attractive) affinity materials, such as Xe overlayers, lead to quantum well states at the interface. Negative(repulsive) affinity materials, such a n-alkane overlayers, present a tunneling barrier that dominates the energies and lifetimes of the image electrons. With the time- and angle-resolved two-photon photoemission technique(TPPE), it is possible to directly observe the dynamics of interfacial electrons with specific energy and parallel momentum. Oscillation in the lifetime of image state electrons as a function of Xe layer thickness is attributed to a quantum size effect and the formation of quantum wells at the Xe/Ag(111) interface[3]. Binding energy measurements as a function of Xe layer thickness in combination with parallel dispersion measurements allow the mapping of the three dimensional electronic structure of bulk Xe. At the n-alkane/Ag(111) interface, image electrons become spatially localized and self-trap into a small polaron state within a few hundred femtosecond[4]. The energy dependence of the self-trapping rate has been modeled with a theory analogous to electron transfer theory. Finally, the immediate extension of this research to study other electron dynamic processes, such as two dimensional electron solvation at interfaces, will be discussed. [1] Fauster, T.; Steinmann, W. Two-Photon Photoemission Spectroscopy of Image States. In Photonic Probes of Surfaces; Halevi, P., Ed.; Elsevier: Amsterdam, 1995; pp. 346-411. [2] Harris, C.B.; Ge, N.-H.; Lingle, Jr., R.L.; McNeill, J.D.; Wong, C.M. Annu. Rev. Phys. Chem. 1997, 48, 711. [3] McNeill, J.D.; Lingle, R.L.,Jr.; Ge, N.-H.; Wong, C.M.; Jordan, R.E.; Harris, C.B. Phys. Rev. Lett. 1997, 79, 4645. [4] Ge, N.-H.; Wong, C.M.; Lingle, R.L., Jr.; McNeill, J.D.; Gaffney, K.J.; Harris, C.B. Science 1998

  19. Dielectric response of pure and doped-GaSe crystals studied by an indigenously developed broadband THz-TDS system

    Science.gov (United States)

    Das, Amit C.; Bhattacharya, S.; Mandal, K. C.; Mondal, S.; Jewariya, M.; Ozaki, T.; Bhaktha, S. N. B.; Datta, P. K.

    2016-04-01

    Publisher's Note: This paper, originally published on 12 July 2016, was replaced with a corrected/revised version on 26 July 2016. If you downloaded the original PDF but are unable to access the revision, please contact SPIE Digital Library Customer Service for assistance. We have developed a terahertz time domain spectroscopy system (THz TDS). For THz generation, optical rectification process and for detection, electro-optic sampling processes are used. Identical cut ZnTe crystals are used for both generation and detection of THz radiation.This spectroscopy system can be used for the noninvasive and contactless electrical and optical characterizations of various samples. In this work spectroscopic measurements of pure, Chromium and Indium doped GaSe crystals within 0.4 THz to 3 THz range are taken by the developed set-up to study the dielectric response of the samples.

  20. Feasibility Study of a Laser Beat-Wave Seeded THz FEL at the Neptune Laboratory

    CERN Document Server

    Reiche, Sven; Pellegrini, Claudio; Rosenzweig, James E; Shvets, Gennady; Tochitsky, Sergei Ya

    2005-01-01

    Free-Electron Laser in the THz range can be used to generate high output power radiation or to modulate the electron beam longitudinally on the radiation wavelength scale. Microbunching on the scale of 1-5 THz is of particular importance for potential phase-locking of a modulated electron beam to a laser-driven plasma accelerating structure. However the lack of a seeding source for the FEL at this spectral range limits operation to a SASE FEL only, which denies a subpicosecond synchronization of the current modulation or radiation with an external laser source. One possibility to overcome this problem is to seed the FEL with two external laser beams, which difference (beat-wave) frequency is matched to the resonant FEL frequency in the THz range. In this presentation we study feasibility of an experiment on laser beat-wave injection in the THz FEL considered at the UCLA Neptune Laboratory, where both a high brightness photoinjector and a two-wavelength, TW-class CO2 laser system exist. By incorporating the en...

  1. Studies on spectroscopy of glycerol in THz range using microfluidic chip-integrated micropump

    Science.gov (United States)

    Su, Bo; Han, Xue; Wu, Ying; Zhang, Cunlin

    2014-11-01

    Terahertz time-domain spectroscopy (THz-TDS) is a detection method of biological molecules with label-free, non-ionizing, non-intrusive, no pollution and real-time monitoring. But owing to the strong THz absorption by water, it is mainly used in the solid state detection of biological molecules. In this paper, we present a microfluidic chip technique for detecting biological liquid samples using the transmission type of THz-TDS system. The microfluidic channel of the microfluidic chip is fabricated in the quartz glass using Micro-Electro-Mechanical System (MEMS) technology and sealed with polydimethylsiloxane (PDMS) diaphragm. The length, width and depth of the microfluidic channel are 25mm, 100μm and 50μm, respectively. The diameter of THz detection zone in the microfluidic channel is 4mm. The thicknesses of quartz glass and PDMS diaphragm are 1mm and 250μm, individually. Another one of the same quartz glass is used to bond with the PDMS for the rigidity and air tightness of the microfluidic chip. In order to realize the automation of sampling and improve the control precise of fluid, a micropump, which comprises PDMS diaphragm, pump chamber, diffuser and nozzle and flat vibration motor, is integrated on the microfluidic chip. The diffuser and nozzle are fabricated on both sides of the pump chamber, which is covered with PDMS diaphragm. The flat vibration motor is stuck on the PDMS diaphragm as the actuator. We study the terahertz absorption spectroscopy characteristics of glycerol with the concentration of 98% in the microfluidic chip by the aid of the THz-TDS system, and the feasibility of the microfluidic chip for the detection of liquid samples is proved.

  2. THz spectrum of reduced glutathione

    Institute of Scientific and Technical Information of China (English)

    WANG; Weining; YAN; Haitao; YUE; Weiwei; ZHAO; Guozhong; Z

    2005-01-01

    The optical characteristics of reduced glutathione molecules between 0.2 THz and 2.4 THz have been investigated by THz time-domain spectroscopy (THz-TDS). The absorption characteristics and optical parameters of the reduced glutathione purged with Nitrogen at room temperature were obtained experimentally. The measured results were fitted well with the theoretical results computed by using Density Functional Theory (DFT) in far-infrared range. Also the conformation of the reduced glutathione molecule was simulated by Gaussian 03. This work has demonstrated significantly that THz-TDS spectroscopy can further be used to study other biological molecules in biological and biomedical engineering.

  3. Tailoring single-cycle electromagnetic pulses in the 2-9 THz frequency range using DAST/SiO2 multilayer structures pumped at Ti:sapphire wavelength

    CERN Document Server

    Stepanov, Andrei G; Bonacina, Luigi; Wolf, Jean-Pierre; Hauri, Christoph P

    2014-01-01

    We present a numerical parametric study of single-cycle electromagnetic pulse generation in a DAST/SiO2 multilayer structure via collinear optical rectification of 800 nm femtosecond laser pulses. It is shown that modifications of the thicknesses of the DAST and SiO2 layers allow tuning of the average frequency of the generated THz pulses in the frequency range from 3 to 6 THz. The laser-to-THz energy conversion efficiency in the proposed structures is compared with that in a bulk DAST crystal and a quasi-phase-matching periodically poled DAST crystal and shows significant enhancement.

  4. Vibrational Signatures in the THz Spectrum of 1,3-DNB: A First-Principles and Experimental Study

    OpenAIRE

    Ahmed, Towfiq; Azad, Abul K.; Chellappa, Raja; Higginbotham-Duque, Amanda; Dattelbaum, Dana M.; Zhu, Jian-Xin; Moore, David; Matthias J. Graf

    2016-01-01

    Understanding the fundamental processes of light-matter interaction is important for detection of explosives and other energetic materials, which are active in the infrared and terahertz (THz) region. We report a comprehensive study on electronic and vibrational lattice properties of structurally similar 1,3-dinitrobenzene (1,3- DNB) crystals through first-principles electronic structure calculations and THz spectroscopy measurements on polycrystalline samples. Starting from reported x-ray cr...

  5. Spectral dynamics of THz pulses generated by two-color laser filaments in air: The role of Kerr nonlinearities and pump wavelength

    CERN Document Server

    Nguyen, A; Dechard, J; Thiele, I; Babushkin, I; Skupin, S; Berge, L

    2016-01-01

    We theoretically and numerically study the influence of both instantaneous and Raman-delayed Kerr nonlinearities as well as a long-wavelength pump in the terahertz (THz) emissions produced by two-color femtosecond filaments in air. Although the Raman-delayed nonlinearity induced by air molecules weakens THz generation, four-wave mixing is found to impact the THz spectra accumulated upon propagation via self-, cross-phase modulations and self-steepening. Besides, using the local current theory, we show that the scaling of laser-to-THz conversion efficiency with the fundamental laser wavelength strongly depends on the relative phase between the two colors, the pulse duration and shape, rendering a universal scaling law impossible. Scaling laws in powers of the pump wavelength may only provide a rough estimate of the increase in the THz yield. We confront these results with comprehensive numerical simulations of strongly focused pulses and of filaments propagating over meter-range distances.

  6. Electric field, Magnetic field and Magnetization: THz time-domain spectroscopy studies

    NARCIS (Netherlands)

    Kumar, N.

    2015-01-01

    Terahertz radiation is electromagnetic waves with frequencies from 0.1-10 THz. THz radiation can pass through cardboard, paper, plastics, ceramics and many other materials. Hence, it can be used for non-destructive imaging. Another important application of THz radiation is spectroscopy. Many

  7. Femtosecond fluorescence studies of DNA/RNA constituents

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, T; Banyasz, A; Markovitsi, D [Laboratoire Francis Perrin, CEA/DSM/IRAMIS/SPAM - CNRS URA 2453 CEA/Saclay, 91191 Gif-sur-Yvette (France); Improta, R, E-mail: thomas.gustavsson@cea.fr [Permanent address : Istituto Biostrutture e Bioimmagini - CNR, Via Mezzocannone 16, 80134 Napoli (Italy)

    2011-01-01

    In this overview, femtosecond fluorescence studies of various DNA constituents are presented, ranging from the monomeric chromophores to different model helices. In order to interpret the experimental results in terms of fundamental processes on the molecular scale they are discussed in the light of recent theoretical calculations. The ultrafast fluorescence decay observed for the monomers is explained by the involvement of highly efficient conical intersections (CI) between the first singlet excited state and the ground state. For the model helices, the picture is more complex, but fluorescence anisotropy data reveal collective effects.

  8. Optimization study of the femtosecond laser-induced forward-transfer process with thin aluminum films.

    Science.gov (United States)

    Bera, Sudipta; Sabbah, A J; Yarbrough, J M; Allen, C G; Winters, Beau; Durfee, Charles G; Squier, Jeff A

    2007-07-20

    The parameters for an effective laser-induced forward-transfer (LIFT) process of aluminum thin films using a femtosecond laser are studied. Deposited feature size as a function of laser fluence, donor film thickness, quality of focus, and the pulse duration are varied, providing a metric of the most desirable conditions for femtosecond LIFT with thin aluminum films.

  9. Study of broadband THz time-domain spectroscopy at different relative humidity levels

    Institute of Scientific and Technical Information of China (English)

    Chiajen Lin; Ichen Ho; X. C. Zhang

    2012-01-01

    Two detection techniques of broadband terahertz (THz) time-domain spectroscopy-THz air-biased coherent detection (THz-ABCD; from 0.3 to 14 THz) and electro-optical (EO) detection (from 0.3 to 7 THz) - are both performed at several different relative humidity levels.The THz power exponentially decays with the increase in relative humidity.The dynamic range of the main pulse in the time domain linearly decreases as the relative humidity increases from 0% to 40%,and linear fittings show that the slopes are -0.017 and -0.019 for THz-ABCD and EO detection,respectively.Because of the multiple reflections caused by the crystal in the common EO detection,THz-ABCD has better spectral resolution (17 GHz) than that of EO detection (170 GHz).The spectrum of water vapor absorption measured by THz-ABCD is also compared with that measured by the Fourier transform infrared spectroscopy (FTIR).

  10. Femtosecond Studies Of Coulomb Explosion Utilizing Covariance Mapping

    CERN Document Server

    Card, D A

    2000-01-01

    The studies presented herein elucidate details of the Coulomb explosion event initiated through the interaction of molecular clusters with an intense femtosecond laser beam (≥1 PW/cm2). Clusters studied include ammonia, titanium-hydrocarbon, pyridine, and 7-azaindole. Covariance analysis is presented as a general technique to study the dynamical processes in clusters and to discern whether the fragmentation channels are competitive. Positive covariance determinations identify concerted processes such as the concomitant explosion of protonated cluster ions of asymmetrical size. Anti- covariance mapping is exploited to distinguish competitive reaction channels such as the production of highly charged nitrogen atoms formed at the expense of the protonated members of a cluster ion ensemble. This technique is exemplified in each cluster system studied. Kinetic energy analyses, from experiment and simulation, are presented to fully understand the Coulomb explosion event. A cutoff study strongly suggests that...

  11. Structure and dynamics of aqueous 2-propanol: a THz-TDS, NMR and neutron diffraction study.

    Science.gov (United States)

    McGregor, James; Li, Ruoyu; Zeitler, J Axel; D'Agostino, Carmine; Collins, James H P; Mantle, Mick D; Manyar, Haresh; Holbrey, John D; Falkowska, Marta; Youngs, Tristan G A; Hardacre, Christopher; Stitt, E Hugh; Gladden, Lynn F

    2015-11-11

    Aqueous liquid mixtures, in particular, those involving amphiphilic species, play an important role in many physical, chemical and biological processes. Of particular interest are alcohol/water mixtures; however, the structural dynamics of such systems are still not fully understood. Herein, a combination of terahertz time-domain spectroscopy (THz-TDS) and NMR relaxation time analysis has been applied to investigate 2-propanol/water mixtures across the entire composition range; while neutron diffraction studies have been carried out at two specific concentrations. Excellent agreement is seen between the techniques with a maximum in both the relative absorption coefficient and the activation energy to molecular motion occurring at ∼90 mol% H2O. Furthermore, this is the same value at which well-established excess thermodynamic functions exhibit a maximum/minimum. Additionally, both neutron diffraction and THz-TDS have been used to provide estimates of the size of the hydration shell around 2-propanol in solution. Both methods determine that between 4 and 5 H2O molecules per 2-propanol are found in the 2-propanol/water clusters at 90 mol% H2O. Based on the acquired data, a description of the structure of 2-propanol/water across the composition range is presented.

  12. Terahertz imaging with sub-wavelength resolution by femtosecond laser filament in air

    CERN Document Server

    Zhao, Jiayu; Guo, Lanjun; Wang, Zhi; Cheng, Ya; Liu, Weiwei; Xu, Zhizhan

    2013-01-01

    Terahertz (THz) imaging provides cutting edge technique in biology, medical sciences and non-destructive evaluation. However, due to the long wavelength of the THz wave, the obtained resolution of THz imaging is normally a few hundred microns and is much lower than that of the traditional optical imaging. We introduce a sub-wavelength resolution THz imaging technique which uses the THz radiation generated by a femtosecond laser filament in air as the probe. This method is based on the fact that the femtosecond laser filament forms a waveguide for the THz wave in air. The diameter of the THz beam, which propagates inside the filament, varies from 20 {\\mu}m to 50 {\\mu}m, which is significantly smaller than the wavelength of the THz wave. Using this highly spatially confined THz beam as the probe, THz imaging with resolution as high as 20 {\\mu}m (~{\\lambda}/38) can be realized.

  13. Study of the microstructural transformations of borate glass and barium metaborate crystals induced by femtosecond laser

    Institute of Scientific and Technical Information of China (English)

    Chen Bin; Yu Bing-Kun; Yan Xiao-Na; Qiu Jian-Rong; Jiang Xiong-Wei; Zhu Cong-Shan

    2004-01-01

    This paper describes the microstructural transformations of borate glass and barium metaborate crystals induced by femtosecond laser. Such structural transformations were verified by Raman spectroscopy. The borate glass is transformed into low temperature (LT) phase of barium metaborate (BaB2O4) crystals after being irradiated for 10 min by a femtosecond laser. In addition, after 20 min of irradiation, high temperature (HT) phase of BaB2O4 crystals is also produced. Further studies demonstrate that LT phase BaB2O4 crystals are formed in the HT phase BaB2O4 crystals after femtosecond laser irradiation for 10 s.

  14. Non-Linear Optical Studies of IR Materials with Infrared Femtosecond Laser

    Science.gov (United States)

    2016-12-15

    AFRL-RD-PS- AFRL-RD-PS- TR-2016-0055 TR-2016-0055 NON-LINEAR OPTICAL STUDIES OF IR MATERIALS WITH INFRARED FEMTOSECOND LASER Enam...ANDREAS SCHMITT-SODY, DR-III ERIN PETTYJOHN, DR-III Program Manager Deputy Chief, High Power Electromagnetics Division This...TITLE AND SUBTITLE Non-Linear Optical Studies of IR Materials with Infrared Femtosecond Laser 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9451-14-1

  15. Characteristics of THz Emission from GaAs Crystal Excited by 400 nm and 800 nm Optical Pulses

    Institute of Scientific and Technical Information of China (English)

    YANG Yu-Ping; XU Xin-Long; YAN Wei; WANG Li

    2005-01-01

    @@ THz emission spectroscopy is used to study the generation mechanism dependent behaviour of terahertz (THz) electromagnetic waves from the GaAs crystal under excitation by 400 nm and 800 nm femtosecond (fs) pulses,respectively. The wavelength dependence of the emission spectrum under two types of THz generation mechanisms is analysed. Under the optical rectification mechanism, a slight enhancement of the spectral amplitude in the high-frequency regime is observed in a GaAs(110) crystal by the excitation of a 400-nm optical pulse compared with that of 800nm. Whereas an obvious red shift of the amplitude spectrum occurs in the GaAs(100) sample under the transient photoconduction mechanism. These phenomena are explained in detail by the duration of the optical pump pulse and the band structure of GaAs, respectively.

  16. Temperature-dependent time-domain THz spectroscopic study of spinel NiCo2O4 thin films

    Science.gov (United States)

    Silwal, Punam; Shan, Tianqi; Kim, Daeho; Talbayev, Diyar

    2013-03-01

    The unique combination of electrical conductivity, infrared transparency, electro catalytic activity, and ferrimagnetic order makes the spinel NiCo2O4 an attractive material for various technological applications. Our previous study showed that high quality epitaxial spinel NiCo2O4 films on MgAl2O4 (001) substrate exhibit metallic behavior accompanied by ferrimagnetic order. The electrical properties of these films can be tuned from metallic to insulating by changing the growth temperature. The comprehensive understanding of the microscopic details of carrier transport in these films requires the study of frequency-dependent optical properties. Terahertz time-domain spectroscopy (THz TDS) can determine the frequency dependent complex dielectric constant, refractive index, and optical conductivity. We used THz TDS to measure the optical properties of NiCo2O4 in the 0.2 - 2.7 THz spectral region. The complex conductivities display a Drude-type frequency response. The extrapolated DC conductivity is consistent with our previous work. The temperature- and growth-condition dependent Drude parameters provide further insight in the metal-insulator transition in these materials.

  17. Theoretical and experimental study of energy transportation and accumulation in femtosecond laser ablation on metals

    Institute of Scientific and Technical Information of China (English)

    TAN Xin-yu; ZHANG Duan-ming; MAO Feng; LI Zhi-hua; YI DI; ZHANG Xiao-zhong

    2009-01-01

    The energy transportation and accumulation effect for femtosecond (fs) laser ablation on metal targets were studied using both theoretical and experimental methods.Using finite difference method,numerical simulation of energy transportation characteristics on copper target ablated by femtosecond laser was performed.Energy accumulation effects on metals of silver and copper ablated by an amplified Ti: sapphire femtosecond laser system were then studied experimentally.The simulated results show that the electrons and lattices have different temperature evolvement characteristics in the ablation stage.The electron temperature increases sharply and reaches the maximum in several femtoseconds while it needs thousands of femtoseconds for lattice to reach the maximum temperature.The experimental results show that uniform laser-induced periodic surface structures (PSS) can be formed with the appropriate pulsed numbers and laser energy density.Electron-phonon coupling coefficient plays an important role in PSS formation in different metals.Surface ripples of Cu are more pronounced than those of Au under the same laser energy density.

  18. Bright 30 THz Impulsive Solar Bursts

    CERN Document Server

    Kaufmann, P; Marcon, R; Kudaka, A S; Cabezas, D P; Cassiano, M M; Francile, C; Fernandes, L O T; Ramirez, R F Hidalgo; Luoni, M; Marun, A; Pereyra, P; de Souza, R V

    2015-01-01

    Impulsive 30 THz continuum bursts have been recently observed in solar flares, utilizing small telescopes with a unique and relatively simple optical setup concept. The most intense burst was observed together with a GOES X2 class event on October 27, 2014, also detected at two sub-THz frequencies, RHESSI X-rays and SDO/HMI and EUV. It exhibits strikingly good correlation in time and in space with white light flare emission. It is likely that this association may prove to be very common. All three 30 THz events recently observed exhibited intense fluxes in the range of 104 solar flux units, considerably larger than those measured for the same events at microwave and sub-mm wavelengths. The 30 THz burst emission might be part of the same spectral burst component found at sub-THz frequencies. The 30 THz solar bursts open a promising new window for the study of flares at their origin

  19. Femtosecond Laser Processing of Germanium: An Ab Initio Molecular Dynamics Study

    CERN Document Server

    Ji, Pengfei

    2016-01-01

    An ab initio molecular dynamics study of femtosecond laser processing of germanium is presented in this paper. The method based on the finite temperature density functional theory is adopted to probe the structural change, thermal motion of the atoms, dynamic property of the velocity autocorrelation, and the vibrational density of states. Starting from a cubic system at room temperature (300 K) containing 64 germanium atoms with an ordered arrangement of 1.132 nm in each dimension, the femtosecond laser processing is simulated by imposing the Nose Hoover thermostat to the electronic subsystem lasting for ~100 fs and continuing with microcanonical ensemble simulation of ~200 fs. The simulation results show solid, liquid and gas phases of germanium under adjusted intensities of the femtosecond laser irradiation. We find the irradiated germanium distinguishes from the usual germanium crystal by analyzing their melting and dynamic properties.

  20. Ultrafast dynamics of o-fluorophenol studied with femtosecond time-resolved photoelectron and photoion spectroscopy

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The ultrafast dynamics of o-fluorophenol via the excited states has been studied by femtosecond time-resolved photoelectron imaging. The photoion and photoelectron spectra taken with a time delay between 267 nm pump laser and 800 nm probe laser provide a longer-lived S1 electronic state of about ns timescale. In comparison,the spectra obtained by exciting the S2 state with femtosecond laser pulses at 400 nm and ionizing with pulses at 800 nm suggest that the S2 state has an ultrashort lifetime about 102 fs and reflects the internal conversion dynamics of the S2 state to the S1 state.

  1. Efficient power combiner for THz radiation

    Directory of Open Access Journals (Sweden)

    Hamide Seidfaraji

    2016-08-01

    Full Text Available Most dangerous explosive materials, both toxic and radioactive, contain nitrogen salts with resonant absorption lines in the frequency range 0.3-10 THz. Therefore, there has been growing interest in remotely detecting such materials by observing the spectrum of reflected signals when the suspicious material is interrogated by THz radiation. Practical portable THz sources available today generate only 20–40 mW output power. This power level is too low to interrogate suspicious material from a safe distance, especially if the material is concealed. Hence, there is a need for sources that can provide greater power in the THz spectrum. Generating and extracting high output power from THz sources is complicated and inefficient. The efficiency of vacuum electronic microwave sources is very low when scaled to the THz range and THz sources based on scaling down semiconductor laser sources have low efficiency as well, resulting in the well known “THz gap.” The reason for such low efficiencies for both source types is material losses in the THz band. In this article an efficient power combiner is described that is based on scaling to higher frequencies a microwave combiner that increases the output power in the THz range of interest in simulation studies. The proposed power combiner not only combines the THz power output from several sources, but can also form a Gaussian wavebeam output. A minimum conversion efficiency of 89% with cophased inputs in a lossy copper power combiner and maximum efficiency of 100% in a Perfect Electric Conductor (PEC-made power combiner were achieved in simulations. Also, it is shown that the TE01 output mode is a reasonable option for THz applications due to the fact that conductive loss decreases for this mode as frequency increases.

  2. THz Plasma Waves in Field-Effect-Transistors: A Monte Carlo Study

    OpenAIRE

    Schumann, Steffen

    2015-01-01

    Sensing with electromagnetic waves having frequencies in the Terahertz-range is a very attractive investigative method with applications in fundamental research and industrial settings. Up to now, a lot of sources and detectors are available. However, most of these systems are bulky and have to be used in controllable environments such as laboratories. In 1993 Dyakonov and Shur suggested that plasma waves developing in field-effect-transistors can be used to emit and detect THz-radiation. Lat...

  3. Initial lattice studies for the Berkeley Femtosecond X-ray Light Source

    Science.gov (United States)

    Zholents, A.; Reichel, I.; Robin, D.; Tanabe, J.; Wan, W.

    2002-05-01

    We present lattice studies for a proposed femtosecond synchrotron radiation X-ray source based on a recirculating accelerator. After a general description, we cover specific aspects of the lattice that are relevant to this type of machine and show preliminary results of particle tracking and briefly describe a new code developed for a comprehensive particle tracking in recirculating accelerators.

  4. Structural Evolution in Photoactive Yellow Protein Studied by Femtosecond Stimulated Raman Spectroscopy

    Directory of Open Access Journals (Sweden)

    Yoshizawa M.

    2013-03-01

    Full Text Available Ultrafast structural evolution in photoactive yellow protein (PYP is studied by femtosecond stimulated Raman spectroscopy. A comparison between wild-type PYP and E46Q mutant reveals that the hydrogen-bonding network surrounding the chromophore of PYP is immediately rearranged in the electronic excited state.

  5. Femtosecond terahertz studies of many-body correlations. From ultrafast phonon-plasmon dynamics to an insulator-metal transition

    Energy Technology Data Exchange (ETDEWEB)

    Kuebler, C.

    2007-07-30

    Phase-matched optical rectification together with standard EOS methods gives direct access to the real-time evolution of the electric field of ultrashort THz pulses. This opens up a new field of experiments, in which the complex dielectric function or equivalently the frequency-dependent conductivity of solid state systems is monitored resonantly throughout the MIR and FIR with a femtosecond temporal resolution. Optical rectification of amplified laser pulses allows for the generation of electric fields of several 10 kV cm-1 up to 1 MV cm-1, depending on the laser pulse energy. Such highly energetic field transients may be employed to coherently drive low-energy transitions into the nonlinear regime. The problems which are inherent to standard EOS, i.e. a fixed detector response and a limited bandwidth, are absent in phase-matched EOS. If this novel detection technique is combined with phase-matched optical rectification, an extremely versatile multi-THz spectrometer is obtained. The accessible frequency range is extended toward the near infrared. In addition, both the emission spectrum and the detector response may be custom tailored to fit specific spectroscopic requirements. Proper choice of the phasematching geometry eliminates multiple time delayed reflections of the main THz pulse, resulting in an essentially unlimited frequency resolution. In the context of optical pump - multi-THz probe experiments the implementation of a photoelastic modulator results in significant improvement of the signal-to-noise ratio: Balancing of the differential detector is rendered less critical and the measurement time in a 2D time-resolved experiment is reduced by up to two orders of magnitude. Finally, the combination of phase-matched optical rectification and phasematched electro-optic sampling shows great scaling potential with respect to both achieving higher field energies and shorter wavelengths. (orig.)

  6. ALL-OPTICAL CONTROL OF THZ RADIATION IN PARALLEL PLATE WAVEGUIDES

    DEFF Research Database (Denmark)

    2010-01-01

    The invention relates to control of THz radiation in parallel plate waveguides (PPWG) by forming components in the waveguide by use of optical radiation pulses. Patterns of excited regions induced in the PPWG by an optical excitation pulses changes the electromagnetic properties of the waveguide...... medium in the THz regime, thereby forming transient passive and active components for controlling THz radiation signals. The excitation can be generation of free charge carriers in a semiconductor material in the PPWG, to create metallic regions that form mirrors, lenses or photonic crystal structures......-on-a-chip applications. The optical and THz radiation can be ultrashort pulses with picosecond or femtosecond pulse durations. L...

  7. THz therapy and smoking: facts and hypotheses

    Directory of Open Access Journals (Sweden)

    Svetlana S. Parshina

    2013-11-01

    Full Text Available There had been studied an antianginal effect and hemodynamic effects of THz electromagnetic waves of molecular NO spectrum (150.176 ... 150.664 GHz in 19 smokers and 18 non-smokers patients with angina. It had been fixed that antianginal, pulse slowing and antihypertensive effects of THz waves in both groups did not differ.

  8. Monte Carlo study of the operation of GaN planar nanodiodes as sub-THz emitters in resonant circuits

    Science.gov (United States)

    Vasallo, B. G.; Millithaler, J. F.; Íñiguez-de-la-Torre, I.; González, T.; Ducournau, G.; Gaquière, C.; Mateos, J.

    2014-11-01

    A study of the high-frequency performance of GaN-based asymmetric self-switching diodes (SSDs) designed for a room-temperature sub-THz Gunn emission, and connected to a resonant RLC parallel circuit, is reported. With the aim of facilitating the achievement and control of Gunn oscillations, which can potentially allow the emission of THz radiation by GaN SSDs, a time-domain Monte Carlo (MC) theoretical study is provided. The simulator has been validated by comparison with the I-V curves of similar fabricated structures, including the possibility of heating effects. A V-shaped SSD has been found to be more efficient than the square one in terms of the DC to AC conversion efficiency η. Indeed, according to our MC results, a value of η of at least 0.35% @ 270 GHz can be achieved for the V-shaped SSD at room temperature by using an adequate resonant circuit. This value can be increased up to 0.80%, even when considering the heating effects, with appropriate RLC elements. Furthermore, simulations show that when several diodes are fabricated in parallel in order to enhance the emitted power, there is no synchronization between the oscillations of all the SSDs; however, the phase-shift effects can be solved using a synchronized current injection by the attachment of a resonant circuit.

  9. Theoretical study of a waveguide THz free electron laser and comparisons with simulations

    Science.gov (United States)

    Shobuda, Yoshihiro; Chin, Yong Ho

    2016-09-01

    In a so-called waveguide free electron laser (FEL) for THz radiations, an extremely small aperture (˜mm ) waveguide is used to confine angularly wide spread radiation fields from a low energy electron beam into a small area. This confinement increases the interaction between the electron beam and the radiation fields to achieve a much higher FEL gain. The radiation fields propagate inside the waveguide as waveguide modes, not like a light flux in a free space FEL. This characteristic behavior of the radiation fields makes intuitive understanding of the waveguide FEL difficult. We developed a three-dimensional waveguide FEL theory to calculate a gain of THz waveguide FEL including the effects of the energy spread, the beam size and the betatron oscillations of an electron beam, and effects of a rectangular waveguide. The FEL gain can be calculated as a function of frequency by solving the dispersion relation. Theoretical gains are compared with simulation results for a waveguide FEL with a planar undulator similar to the KAERI one. Good agreements are obtained.

  10. Theoretical study of a waveguide THz free electron laser and comparisons with simulations

    Directory of Open Access Journals (Sweden)

    Yoshihiro Shobuda

    2016-09-01

    Full Text Available In a so-called waveguide free electron laser (FEL for THz radiations, an extremely small aperture (∼mm waveguide is used to confine angularly wide spread radiation fields from a low energy electron beam into a small area. This confinement increases the interaction between the electron beam and the radiation fields to achieve a much higher FEL gain. The radiation fields propagate inside the waveguide as waveguide modes, not like a light flux in a free space FEL. This characteristic behavior of the radiation fields makes intuitive understanding of the waveguide FEL difficult. We developed a three-dimensional waveguide FEL theory to calculate a gain of THz waveguide FEL including the effects of the energy spread, the beam size and the betatron oscillations of an electron beam, and effects of a rectangular waveguide. The FEL gain can be calculated as a function of frequency by solving the dispersion relation. Theoretical gains are compared with simulation results for a waveguide FEL with a planar undulator similar to the KAERI one. Good agreements are obtained.

  11. THz spectra of five borates crystals

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Terahertz spectral responses have been studied for five borate crystals Na5[B2P3O13](NBP),Zn3BPO (ZBP),SrB4O7(SBO),Na3La9O3(BO3)8(NLBO)and PbB4O7(PBO).It is found that the samples had good transmission in 0.25-1.5 THz region.Both SBO and NLBO have an absorption coefficient less than 10cm-1.Among them,SBO has not only the smallest absorption coefficient but also a very flat dispersion in the frequency region under investigation.Distinct resonance absorption peaks are observed for ZBP at v1=1.4 THz,v2=2.0 THz and SBO at v=2.4 THz.In the spectrum of PBO,two 8bnormal dispersions appear in the frequency regions 1.44-1.74 and 2.2-2.5 THz.The absorption coetficients and refraction indices of the five crystals are extracted from the THz time-domain(THz-TDB)spectra in 0.25-2.5 THz region.The properties and origins of the spectral responses are addressed.

  12. THz spectra of cortisone and the related medicine

    Science.gov (United States)

    Ma, Shihua; Ge, Min; Liu, Guifeng; Song, Xiyu; Zhang, Peng; Wang, Wenfeng

    2009-07-01

    THz-TDS are used to study four kinds of drug: cortisone, hydrocortisone, prednisone and prednisolone. The THz spectra of them are obtained and analyzed from 0.2 - 1.6 THz. The experimental results shows the four samples have the different THz spectra. Cortisone has a peak at 1.5 THz and a broad absorption peak at 0.96 THz, while hydrocortisone has a weak absorption peak that lies at 1.27 THz. At the same time the prednisone has the stronger absorption peaks than the others, and its two peaks shows at 1.24 THz and 1.5 THz. Prednisolone has a weak broad peak at 1.43 THz. The results of the theoretical calculation were performed using Gaussian 03 software with Density Functional Theory at the basis set of 6-31+G (d, p). The theoretical vibrational frequencies are compared with the experimental results, and the deviations are discussed. The THz spectra of the medicine show THz technique may be help to distinguish some different chemical bond and functional group.

  13. Femtosecond Raman induced polarization spectroscopy studies of coherent rotational dynamics in molecular fluids

    Energy Technology Data Exchange (ETDEWEB)

    Morgen, Michael Mark [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry

    1997-05-01

    We develop a polarization-sensitive femtosecond pump probe technique, Raman induced polarization spectroscopy (RIPS), to study coherent rotation in molecular fluids. By observing the collisional dephasing of the coherently prepared rotational states, we are able to extract information concerning the effects of molecular interactions on the rotational motion. The technique is quite sensitive because of the zero background detection method, and is also versatile due to its nonresonant nature.

  14. Density-Functional-Theory Studies of C20 in Femtosecond Laser Pulses

    Institute of Scientific and Technical Information of China (English)

    WANG Zhi-Ping; BIAN Bao-An; WANG Li-Guang

    2010-01-01

    @@ We study the electron response of C20 excited by strong femtosecond laser pulses by applying the time-dependent local-density approximation,an approach which has proven to provide a robust tool for investigations of fullerene.The optical response as well as the full electronic dipolar response and ionization processes of C20 subject to the laser field are explored.A strong correlation between induced electronic dipole oscillations and electron emission is observed.

  15. Two-photon fluorescence imaging and femtosecond laser microsurgery to study drosophila dorsal closure

    Science.gov (United States)

    Thayil K. N., Anisha; Pereira, Andrea; Mathew, Manoj; Artigas, David; Martín Blanco, Enrique; Loza-Alvarez, Pablo

    2008-02-01

    Dorsal closure is a key morphogenic process that occurs at the last stages of Drosophila melanogaster embryogenesis. It involves a well coordinated rearrangement and movement of tissues that resemble epithelial wound healing in mammals. The cell dynamics and intracellular signaling pathways that accompany hole closure are expected to be similar during would healing providing a model system to study epithelial healing. Here we demonstrate the use of two-photon fluorescence microscope together with femtosecond laser ablation to examine the epithelial wound healing during embryonic dorsal closure. By using tightly focused NIR femtosecond pulses of subnanojoule energy we are able to produce highly confined microsurgery on the epithelial cells of a developing embryo. We observed that drosophila epidermis heals from the laser wounds with increased activity of actin near the wound edges.

  16. Optical emission studies of plasma induced by single and double femtosecond laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Pinon, V. [Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas (IESL-FORTH), P.O. Box 1385, 71110 Heraklion, Crete (Greece); Universidad de A Coruna, Departamento de Ingenieria Industrial II, E-15403 Ferrol, A Coruna (Spain); Anglos, D., E-mail: anglos@iesl.forth.g [Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas (IESL-FORTH), P.O. Box 1385, 71110 Heraklion, Crete (Greece); Department of Chemistry, University of Crete, 71003 Heraklion, Crete (Greece)

    2009-10-15

    Double-pulse femtosecond laser ablation has been shown to lead to significant increase of the intensity and reproducibility of the optical emission signal compared to single-pulse ablation particularly when an appropriate interpulse delay is selected, that is typically in the range of 50-1000 ps. This effect can be especially advantageous in the context of femtosecond laser-induced breakdown spectroscopy analysis of materials. A detailed comparative study of collinear double- over single-pulse femtosecond laser-induced breakdown spectroscopy has been carried out, based on measurements of emission lifetime, temperature and electronic density of plasmas, produced during laser ablation of brass with 450 fs laser pulses at 248 nm. The results obtained show a distinct increase of plasma temperature and electronic density as well as a longer decay time in the double-pulse case. The plasma temperature increase is in agreement with the observed dependence of the emission intensity enhancement on the upper energy level of the corresponding spectral line. Namely, intensity enhancement of emission lines originating from higher lying levels is more profound compared to that of lines arising from lower energy levels. Finally, a substantial decrease of the plasma threshold fluence was observed in the double-pulse arrangement; this enables sensitive analysis with minimal damage on the sample surface.

  17. Femtosecond Spectroscopy of LuMnO3

    Science.gov (United States)

    Lou, Shitao; Zimmermann, Frank M.; Bartynski, Robert A.; Hur, Namjun; Cheong, Sang-Wook

    2006-03-01

    Hexagonal LuMnO3 manganite is a ferroelectric and strongly frustrated antiferromagnetic crystal. Strong coupling between lattice, electronic, and magnetic degrees of freedom makes it a promising electronic material. We have used femtosecond pump-probe spectroscopy to study the interaction of electron excitations with lattice vibrations in real time. Optical excitation of a Mn d(x^2-y^2),(xy)->d(3z^2-r^2)transition served as the primary excitation step. With both pump and probe beam polarization perpendicular to the c axis, the probe reflectivity shows a sharp drop due to saturation of the transition, recovering on a timescale of 1 ps. We also observed displacive excitation of a coherent optical phonon vibration at 3.6 THz, which is assigned to an A1 symmetry mode involving Lu ion motion along the c axis. This mode was excited in longitudinal (LO) and transverse mode (TO) geometries. While the LO-TO frequency splitting is small (<0.1 THz), a remarkable phase reversal of the reflectivity curve was observed. This is attributed to a large linear electro-optic effect (Pockels effect), induced by the THz electric field associated with the LO mode.

  18. Production and Characterization of High Repetition Rate Terahertz Radiation in Femtosecond-Laser-Induced Air Plasma

    Science.gov (United States)

    2009-03-01

    20 3.1 Verdi -Pumped Femtosecond Laser System...current which then produces the observed THz pulse [9]. 20 III. EQUIPMENT 3.1 VERDI -PUMPED FEMTOSECOND LASER SYSTEM The laser used in...this research is a Coherent fs pulsed laser system as shown schematically in figure 4. The 18 W Verdi beam pumps the 76 MHz MIRA, which produces 50

  19. RF gun for an intense THz radiation source

    Institute of Scientific and Technical Information of China (English)

    GU Qiang; ZHAO Zhen-Tang; TONG De-Chun; CHEN Li-Fang; XU Xiu-Min

    2008-01-01

    A new facility is under construction at the Shanghai Institute of Applied Physics,to generate femto-second electron bunches and intense coherent THz radiation pulses.A thermionic RF-gun is used to be the electron source of the linac,which is 1.6 cell,π/2,side coupled in design.In the following of this paper,the design,manufacture and beam operation of this gun are presented.

  20. Fractal THz metamaterials

    DEFF Research Database (Denmark)

    Malureanu, Radu; Jepsen, Peter Uhd; Xiao, S.

    2010-01-01

    The concept of metamaterials (MTMs) is acknowledged for providing new horizons for controlling electromagnetic radiations thus their use in frequency ranges otherwise difficult to manage (e.g. THz radiation) broadens our possibility to better understand our world as well as opens the path for new...... frequency range as well as a clear differentiation between one polarisation and another. Based on theoretical predictions we fabricated and measured a fractal based THz metamaterial that shows more than 60% field transmission at around 1THz for TE polarized light while the TM waves have almost 80% field...... wavelength of THz radiation, the resolution requirements for fabrication of metamaterials are within the optical lithography range. However, the high aspect ratio of such structures as well as the substrate thickness pose challenges in the fabrication process. The measurements were made using terahertz time...

  1. Experimental and numerical study of surface alloying by femtosecond laser radiation

    Energy Technology Data Exchange (ETDEWEB)

    Gurevich, E.L., E-mail: gurevich@isas.de [Leibniz-Institut fuer Analytische Wissenschaften - ISAS - e.V., Bunsen-Kirchhoff-Strasse 11, 44139 Dortmund (Germany); Kittel, S.; Hergenroeder, R. [Leibniz-Institut fuer Analytische Wissenschaften - ISAS - e.V., Bunsen-Kirchhoff-Strasse 11, 44139 Dortmund (Germany)

    2012-01-15

    Here we report on experimental studies of femtosecond laser induced surface metal alloying. We demonstrate that layers of different metals can be mixed in a certain range of laser pulse energies. Numeric simulations demonstrate that the sub-surface melting and mixing is advantaged through the difference in the electron-phonon coupling constants of the metals in the multi-layer system. Dependence of the depth of the mixed layer on the number of laser pulses per unit area is studied. Numeric simulations illustrate physical picture of the laser alloying process.

  2. Experimental and numerical study of surface alloying by femtosecond laser radiation

    Science.gov (United States)

    Gurevich, E. L.; Kittel, S.; Hergenröder, R.

    2012-01-01

    Here we report on experimental studies of femtosecond laser induced surface metal alloying. We demonstrate that layers of different metals can be mixed in a certain range of laser pulse energies. Numeric simulations demonstrate that the sub-surface melting and mixing is advantaged through the difference in the electron-phonon coupling constants of the metals in the multi-layer system. Dependence of the depth of the mixed layer on the number of laser pulses per unit area is studied. Numeric simulations illustrate physical picture of the laser alloying process.

  3. Chromatic Effect for THz Generation in a Novel Wave-front Tilt Scheme

    CERN Document Server

    Li, Bin; Liu, Xiaoqing; Chen, Jianhui; Deng, Haixiao; Feng, Chao; Feng, Lie; Lan, Taihe; Liu, Bo; Liu, Jia; Wang, Dong; Wang, Xingtao; Zeng, Zhinan; Zhang, lijian; Zhang, Tong; Zhao, Zhentang

    2016-01-01

    Deriving single or few cycle terahertz pulse (THz) by intense femtosecond laser through cascaded optical rectification in electro-optic crystals is a crucial technique in cutting-edge time-resolved spectroscopy to characterize micro-scale structures and ultrafast dynamics. In the past decade, lithium niobate (LN) crystal implementation of wave-front tilt scheme has been prevalently used, while painstaking efforts have been invested in order to achieve higher THz conversion efficiency. In this research we developed a brand new type of LN crystal possessing dual-face-cut and Brewster coupling, and conducted experimental and simulative investigation systematically to optimize the multi-dimensionally entangled parameters in THz generation, predicting the extreme conversion efficiency of 10% is potentially promising at the THz absorption coefficient of 0.5cm-1. More remarkably, we first discovered that the chirp of the driving laser pulse plays a decisive role in the wave-front tilt scheme, and the THz generation ...

  4. Nonlinear optical studies in semiconductor-doped glasses under femtosecond pulse excitation

    Indian Academy of Sciences (India)

    C P Singh; K S Bindra; S M Oak

    2010-12-01

    Nonlinear optical studies in semiconductor-doped glasses (SDGs) are performed under femtosecond laser pulse excitation. Z-scan experiments with 800 nm wave- length pulses are used to excite SDG samples in the resonance and non-resonance regimes. Schott colour glass filter OG 515 shows stronger two-photon absorption than GG 420 and both the samples exhibit positive nonlinearity. However, in resonantly excited RG 850 the intensity-dependent Z-scan shows transition from saturable to reverse saturable absorption behaviour with the increase in intensity.

  5. Dynamical studies on the generation of periodic surface structures by femtosecond laser pulses

    Directory of Open Access Journals (Sweden)

    Rosenfeld A.

    2013-11-01

    Full Text Available The dynamics of the formation of laser-induced periodic surface structures (LIPSS on fused silica upon irradiation with linearly polarized fs-laser pulses (50 fs pulse duration, 800 nm center wavelength is studied experimentally using a double pulse experiment with cross polarized pulse sequences and a trans illumination femtosecond time-resolved (0.1 ps – 1 ns pump-probe diffraction approach. The results in both experiments confirm the importance of the ultrafast energy deposition and the laser-induced free-electron plasma in the conduction band of the solids for the formation of LIPSS.

  6. Femtosecond stimulated Raman study of the photoactive flavoprotein AppABLUF

    Science.gov (United States)

    Hall, Christopher R.; Heisler, Ismael A.; Jones, Garth A.; Frost, James E.; Gil, Agnieszka A.; Tonge, Peter J.; Meech, Stephen R.

    2017-09-01

    Femtosecond stimulated Raman spectroscopy (FSRS) is applied to study the photocycle of a blue light using flavin (BLUF) domain photoreceptor, AppABLUF. It is shown that FSRS spectra are sensitive to the light adapted state of the protein and probe its excited state dynamics. The dominant contribution to the most sensitive excited state Raman active modes is from flavin ring modes. However, TD-DFT calculations for excited state structures indicate that reproduction and assignment of the experimentally observed spectral shift will require high level calculations on the flavin in its specific protein environment.

  7. Time-resolved study of femtosecond laser induced micro-modifications inside transparent brittle materials

    Science.gov (United States)

    Hendricks, F.; Matylitsky, V. V.; Domke, M.; Huber, Heinz P.

    2016-03-01

    Laser processing of optically transparent or semi-transparent, brittle materials is finding wide use in various manufacturing sectors. For example, in consumer electronic devices such as smartphones or tablets, cover glass needs to be cut precisely in various shapes. The unique advantage of material processing with femtosecond lasers is efficient, fast and localized energy deposition in nearly all types of solid materials. When an ultra-short laser pulse is focused inside glass, only the localized region in the neighborhood of the focal volume absorbs laser energy by nonlinear optical absorption. Therefore, the processing volume is strongly defined, while the rest of the target stays unaffected. Thus ultra-short pulse lasers allow cutting of the chemically strengthened glasses such as Corning Gorilla glass without cracking. Non-ablative cutting of transparent, brittle materials, using the newly developed femtosecond process ClearShapeTM from Spectra-Physics, is based on producing a micron-sized material modification track with well-defined geometry inside. The key point for development of the process is to understand the induced modification by a single femtosecond laser shot. In this paper, pump-probe microscopy techniques have been applied to study the defect formation inside of transparent materials, namely soda-lime glass samples, on a time scale between one nanosecond to several tens of microseconds. The observed effects include acoustic wave propagation as well as mechanical stress formation in the bulk of the glass. Besides better understanding of underlying physical mechanisms, our experimental observations have enabled us to find optimal process parameters for the glass cutting application and lead to better quality and speed for the ClearShapeTM process.

  8. Cytogenetic observations in human peripheral blood leukocytes following in vitro exposure to THz radiation: a pilot study.

    Science.gov (United States)

    Zeni, O; Gallerano, G P; Perrotta, A; Romanò, M; Sannino, A; Sarti, M; D'Arienzo, M; Doria, A; Giovenale, E; Lai, A; Messina, G; Scarfì, M R

    2007-04-01

    Emerging technologies are considering the possible use of Terahertz radiation in different fields ranging from telecommunications to biology and biomedicine. The study of the potential effects of Terahertz radiation on biological systems is therefore an important issue in order to safely develop a variety of applications. This paper describes a pilot study devoted to determine if Terahertz radiation could induce genotoxic effects in human peripheral blood leukocytes. For this purpose, human whole blood samples from healthy donors were exposed for 20 min to Terahertz radiation. Since, to our knowledge, this is the first study devoted to the evaluation of possible genotoxic effects of such radiation, different electromagnetic conditions were considered. In particular, the frequencies of 120 and 130 GHz were chosen: the first one was tested at a specific absorption rate (SAR) of 0.4 mW g-1, while the second one was tested at SAR levels of 0.24, 1.4, and 2 mW g-1. Chromosomal damage was evaluated by means of the cytokinesis block micronucleus technique, which also gives information on cell cycle kinetics. Moreover, human whole blood samples exposed to 130 GHz at SAR levels of 1.4 and 2 mW g-1 were also tested for primary DNA damage by applying the alkaline comet assay immediately after exposure. The results obtained indicate that THz exposure, in the explored electromagnetic conditions, is not able to induce either genotoxicity or alteration of cell cycle kinetics in human blood cells from healthy subjects.

  9. THz Detection and Imaging using Rydberg Atoms

    Science.gov (United States)

    Wade, Christopher; Sibalic, Nikola; Kondo, Jorge; de Melo, Natalia; Adams, Charles; Weatherill, Kevin

    2016-05-01

    Atoms make excellent electromagnetic field sensors because each atom of the same isotope is identical and has well-studied, permanent properties allowing calibration to SI units. Thus far, atoms have not generally been exploited for terahertz detection because transitions from the atomic ground state are constrained to a limited selection of microwave and optical frequencies. In contrast, highly excited `Rydberg' states allow us access to many strong, electric dipole transitions from the RF to THz regimes. Recent advances in the coherent optical detection of Rydberg atoms have been exploited by a number of groups for precision microwave electrometry Here we report the demonstration of a room-temperature, cesium Rydberg gas as a THz to optical interface. We present two configurations: First, THz-induced fluorescence offers non-destructive and direct imaging of the THz field, providing real-time, single shot images. Second, we convert narrowband terahertz photons to infrared photons with 6% quantum efficiency allowing us to use nano-Watts of THz power to control micro-Watts of laser power on microsecond timescales. Exploiting hysteresis and a room-temperature phase transition in the response of the medium, we demonstrate a latching optical memory for sub pico-Joule THz pulses.

  10. Introduction to THz wave photonics

    CERN Document Server

    Zhang, X-C

    2009-01-01

    Introduction to THz Wave Photonics examines the science and technology related to terahertz wave technologies, taking a dual approach between presenting the field 's history while simultaneously providing an overview of existing technology. The latest research in developing THz areas such as electromagnetic waves are presented, along with an introduction to continuous wave THz technology. Authors X.-C. Zhang and Jingzhou Xu place particular emphasis on pulsed THz technology, among many other facets of THz technology including: Complete coverage of THz wave spectroscopy and imagingA discussion

  11. Optimized Optical Rectification and Electro-optic Sampling in ZnTe Crystals with Chirped Femtosecond Laser Pulses

    DEFF Research Database (Denmark)

    Erschens, Dines Nøddegaard; Turchinovich, Dmitry; Jepsen, Peter Uhd

    2011-01-01

    We report on optimization of the intensity of THz signals generated and detected by optical rectification and electro-optic sampling in dispersive, nonlinear media. Addition of a negative prechirp to the femtosecond laser pulses used in the THz generation and detection processes in 1-mm thick ZnT...

  12. Laser assisted bioprinting using a femtosecond laser with and without a gold transductive layer: a parametric study

    Science.gov (United States)

    Desrus, H.; Chassagne, B.; Catros, S.; Artiges, C.; Devillard, R.; Petit, S.; Deloison, F.; Fricain, J. C.; Guillemot, F.; Kling, R.

    2016-03-01

    Experimental results of femtosecond Laser Assisted Bioprinting (LAB) are reported on. Two set-up, used to print different model bioinks and keratinocytes cells line HaCaT, were studied: first one was using a femtosecond laser with low pulse energy and an absorbing gold layer, whereas the second one used high pulse energy enabling the removal of the absorbing layer. Printed drop diameter and resulting height of the bioink jet are then quantified as a function of the LAB parameters such as laser energy, focus spot location or numerical aperture.

  13. Femtosecond spectroscopic study of photochromic reactions of bacteriorhodopsin and visual rhodopsin.

    Science.gov (United States)

    Feldman, Tatiana B; Smitienko, Olga A; Shelaev, Ivan V; Gostev, Fedor E; Nekrasova, Oksana V; Dolgikh, Dmitriy A; Nadtochenko, Victor A; Kirpichnikov, Mikhail P; Ostrovsky, Mikhail A

    2016-11-01

    Photochromic ultrafast reactions of bacteriorhodopsin (H. salinarum) and bovine rhodopsin were conducted with a femtosecond two-pump probe pulse setup with the time resolution of 20-25fs. The dynamics of the forward and reverse photochemical reactions for both retinal-containing proteins was compared. It is demonstrated that when retinal-containing proteins are excited by femtosecond pulses, dynamics pattern of the vibrational coherent wave packets in the course of the reaction is different for bacteriorhodopsin and visual rhodopsin. As shown in these studies, the low-frequencies that form a wave packets experimentally observed in the dynamics of primary products formation as a result of retinal photoisomerization have different intensities and are clearer for bovine rhodopsin. Photo-reversible reactions for both retinal proteins were performed from the stage of the relatively stable photointermediates that appear within 3-5ps after the light pulse impact. It is demonstrated that the efficiency of the reverse phototransition K-form→bacteriorhodopsin is almost five-fold higher than that of the Batho-intermediate→visual rhodopsin phototransition. The results obtained indicate that in the course of evolution the intramolecular mechanism of the chromophore-protein interaction in visual rhodopsin becomes more perfect and specific. The decrease in the probability of the reverse chromophore photoisomerization (all-trans→11-cis retinal) in primary photo-induced rhodopsin products causes an increase in the efficiency of the photoreception process.

  14. Two-Dimensional Fractal Metamaterials for Applications in THz

    DEFF Research Database (Denmark)

    Malureanu, Radu; Jepsen, Peter Uhd; Zalkovskij, Maksim

    2011-01-01

    applications. THz radiation can be employed for various purposes, among them the study of vibrations in biological molecules, motion of electrons in semiconductors and propagation of acoustic shock waves in crystals. We propose here a new THz fractal MTM design that shows very high transmission in the desired...... frequency range as well as a clear differentiation between one polarisation and another. Based on theoretical predictions we fabricated and measured a fractal based THz metamaterial that shows more than 60% field transmission at around 1 THz for TE polarized light while the TM waves have almost 80% field...

  15. THz and Security Applications

    CERN Document Server

    Sizov, Fedir; Detectors, Sources and Associated Electronics for THz Applications

    2014-01-01

    These proceedings comprise invited papers from highly experienced researchers in THz technology and security applications. THz detection of explosives represents one of the most appealing technologies to have recently emerged in dealing with terrorist attacks encountered by civil security and military forces throughout the world. Discussed are the most advanced technologies and developments, the various points of operational strength and weaknesses as well as are suggestions and predictions the best technological solutions to  overcome current operational limits.  The current status of various levels of cooling in THz detectors, sources and associated electronics are also addressed. The goal was to provide a clear view on the current technologies available and the required advances needed in order to achieve more efficient systems. This goal was outlined in part by establishing the baseline of current uncertainty estimations in physics-based modelling and the identification of key areas which require additi...

  16. THz Emission Spectroscopy for THz Spintronics

    Science.gov (United States)

    Jarik Huisman, Thomas; Rasing, Theo

    2017-01-01

    Spintronics is used as the standard for the readout of magnetically stored data and also has commercial applications for writing data. The generation, control and detection of spin-polarized currents, spin-dependent electric transport, and pure spin currents on the subpicosecond (10-12 s) timescale are the next challenges in spintronics. Terahertz (THz, 1012 Hz) emission spectroscopy has proven to be an excellent tool for investigating these challenges. In this short review, we outline the functioning of this spectroscopic technique and its recent applications to spintronics.

  17. Passive THz metamaterials

    DEFF Research Database (Denmark)

    Lavrinenko, Andrei; Malureanu, Radu; Zalkovskij, Maksim

    2012-01-01

    In this work we present our activities in the fabrication and characterization of passive THz metamaterials. We use two fabrication processes to develop metamaterials either as free-standing metallic membranes or patterned metallic multi-layers on the substrates to achieve different functionalities....... Our interest lies in metamaterials for a broad spectrum of linear properties in operations with THz waves, such as linear and circular polarizers, absorbers and devices with enhanced transmittivity, single layer dichroic and chiral systems. All the three steps (modelling, fabrication...

  18. Passive THz metamaterials

    DEFF Research Database (Denmark)

    Lavrinenko, Andrei; Malureanu, Radu; Zalkovskij, Maksim

    2012-01-01

    In this work we present our activities in the fabrication and characterization of passive THz metamaterials. We use two fabrication processes to develop metamaterials either as free-standing metallic membranes or patterned metallic multi-layers on the substrates to achieve different functionaliti....... Our interest lies in metamaterials for a broad spectrum of linear properties in operations with THz waves, such as linear and circular polarizers, absorbers and devices with enhanced transmittivity, single layer dichroic and chiral systems. All the three steps (modelling, fabrication...

  19. Model of THz Magnetization Dynamics

    Science.gov (United States)

    Bocklage, Lars

    2016-01-01

    Magnetization dynamics can be coherently controlled by THz laser excitation, which can be applied in ultrafast magnetization control and switching. Here, transient magnetization dynamics are calculated for excitation with THz magnetic field pulses. We use the ansatz of Smit and Beljers, to formulate dynamic properties of the magnetization via partial derivatives of the samples free energy density, and extend it to solve the Landau-Lifshitz-equation to obtain the THz transients of the magnetization. The model is used to determine the magnetization response to ultrafast multi- and single-cycle THz pulses. Control of the magnetization trajectory by utilizing the THz pulse shape and polarization is demonstrated. PMID:26956997

  20. Femtosecond laser microstructuring of titanium surfaces for middle ear ossicular replacement prosthesis: results of preliminary studies

    Science.gov (United States)

    Biedron, S.; Ilgner, J. F. R.; Fadeeva, E.; Chichkov, B.; Prescher, A.; Bovi, M.; Westhofen, M.

    2009-07-01

    The objective of this study was to optimize titanium surfaces by means of Ti:Sapphire femtosecond laser to improve the attachment of human cartilage cells on titanium prosthesis in middle ear surgery. The application of microstructures on titanium samples was evaluated and the influence of these microstructures on human auricular chondrocytes was studied in-vitro. After establishing the ear chondrocyte cell culture, cells were seeded on titanium platelets with selected microstructure patterns. Whereas the phenotype of cells seeded on unstructured titanium was similar to cells grown on standard tissue culture surfaces, the morphology of chondrocytes grown on structured titanium samples was influenced by the pattern. For future titanium middle ear prosthesis structural optimizations will be developed to promote chondrocyte growth and adhesion while impeding fibrocyte proliferation to avoid scarring on implant interfaces.

  1. Photodissociation and charge transfer dynamics of negative ions studied with femtosecond photoelectron spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Zanni, Martin Thomas [Univ. of California, Berkeley, CA (United States)

    1999-12-01

    This dissertation presents studies aimed at understanding the potential energy surfaces and dynamics of isolated negative ions, and the effects of solvent on each. Although negative ions play important roles in atmospheric and solution phase chemistry, to a large extent the ground and excited state potential energy surfaces of gas phase negative ions are poorly characterized, and solvent effects even less well understood. In an effort to fill this gap, the author's coworkers and the author have developed a new technique, anion femtosecond photoelectron spectroscopy, and applied it to gas phase photodissociation and charge transfer processes. Studies are presented that (1) characterize the ground and excited states of isolated and clustered anions, (2) monitor the photodissociation dynamics of isolated and clustered anions, and (3) explore the charge-transfer-to-solvent states of atomic iodide clustered with polar and non-polar solvents.

  2. Photodissociation and charge transfer dynamics of negative ions studied with femtosecond photoelectron spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Zanni, Martin T.

    1999-12-17

    This dissertation presents studies aimed at understanding the potential energy surfaces and dynamics of isolated negative ions, and the effects of solvent on each. Although negative ions play important roles in atmospheric and solution phase chemistry, to a large extent the ground and excited state potential energy surfaces of gas phase negative ions are poorly characterized, and solvent effects even less well understood. In an effort to fill this gap, the author's coworkers and the author have developed a new technique, anion femtosecond photoelectron spectroscopy, and applied it to gas phase photodissociation and charge transfer processes. Studies are presented that (1) characterize the ground and excited states of isolated and clustered anions, (2) monitor the photodissociation dynamics of isolated and clustered anions, and (3) explore the charge-transfer-to-solvent states of atomic iodide clustered with polar and non-polar solvents.

  3. Using Femtosecond Laser Subcellular Surgery as a Tool to Study Cell Biology

    Energy Technology Data Exchange (ETDEWEB)

    Shen, N; Colvin, M E; Huser, T

    2007-02-27

    Research on cellular function and regulation would be greatly advanced by new instrumentation using methods to alter cellular processes with spatial discrimination on the nanometer-scale. We present a novel technique for targeting submicrometer sized organelles or other biologically important regions in living cells using femtosecond laser pulses. By tightly focusing these pulses beneath the cell membrane, we can vaporize cellular material inside the cell through nonlinear optical processes. This technique enables non-invasive manipulation of the physical structure of a cell with sub-micrometer resolution. We propose to study the role mitochondria play in cell proliferation and apoptosis. Our technique provides a unique tool for the study of cell biology.

  4. The effects of laser repetition rate on femtosecond laser ablation of dry bone: a thermal and LIBS study.

    Science.gov (United States)

    Gill, Ruby K; Smith, Zachary J; Lee, Changwon; Wachsmann-Hogiu, Sebastian

    2016-01-01

    The aim of this study is to understand the effect of varying laser repetition rate on thermal energy accumulation and dissipation as well as femtosecond Laser Induced Breakdown Spectroscopy (fsLIBS) signals, which may help create the framework for clinical translation of femtosecond lasers for surgical procedures. We study the effect of repetition rates on ablation widths, sample temperature, and LIBS signal of bone. SEM images were acquired to quantify the morphology of the ablated volume and fsLIBS was performed to characterize changes in signal intensity and background. We also report for the first time experimentally measured temperature distributions of bone irradiated with femtosecond lasers at repetition rates below and above carbonization conditions. While high repetition rates would allow for faster cutting, heat accumulation exceeds heat dissipation and results in carbonization of the sample. At repetition rates where carbonization occurs, the sample temperature increases to a level that is well above the threshold for irreversible cellular damage. These results highlight the importance of the need for careful selection of the repetition rate for a femtosecond laser surgery procedure to minimize the extent of thermal damage to surrounding tissues and prevent misclassification of tissue by fsLIBS analysis.

  5. CW THz standoff imaging

    Science.gov (United States)

    Deng, Chao; Zhang, Yalin; Mu, Junkai; Zhao, Yuejin; Zhang, Cunlin

    2009-11-01

    We present a continuous-wave (CW) terahertz (THz) standoff scanning imaging system at 0.2 THz. This system works at reflection geometry and the imaging distance is 30 m. A Gunn oscillator is utilized as emitter and an unbiased Schottky diode operated at room temperature is employed as detector. A polyethylene Fresnel lens is used to collimation terahertz wave for standoff propagation. five aluminum mirrors are employed to increase distance. The sample is placed on an X-Y two-dimensional stage which is controlled by a computer. The collimated THz wave propagates in air and is focused to the sample by another polyethylene Fresnel lens. The back scatted THz wave from the sample surface is collected by the detector alone the same path. The two-dimensional image of sample is obtained by a raster scanning fashion. An aluminum plate with holes, an airplane model and a toy gun contained in a box are imaged at 30 m from the imaging unit. The results show that this standoff imaging system has a wide potential to be applied in the area of security inspection and screening.

  6. Perspective: Ultrafast magnetism and THz spintronics

    Energy Technology Data Exchange (ETDEWEB)

    Walowski, Jakob; Münzenberg, Markus [Institut für Physik, Ernst-Moritz-Arndt-Universität Greifswald, 17489 Greifswald (Germany)

    2016-10-14

    This year the discovery of femtosecond demagnetization by laser pulses is 20 years old. For the first time, this milestone work by Bigot and coworkers gave insight directly into the time scales of microscopic interactions that connect the spin and electron system. While intense discussions in the field were fueled by the complexity of the processes in the past, it now became evident that it is a puzzle of many different parts. Rather than providing an overview that has been presented in previous reviews on ultrafast processes in ferromagnets, this perspective will show that with our current depth of knowledge the first applications are developed: THz spintronics and all-optical spin manipulation are becoming more and more feasible. The aim of this perspective is to point out where we can connect the different puzzle pieces of understanding gathered over 20 years to develop novel applications. Based on many observations in a large number of experiments. Differences in the theoretical models arise from the localized and delocalized nature of ferromagnetism. Transport effects are intrinsically non-local in spintronic devices and at interfaces. We review the need for multiscale modeling to address the processes starting from electronic excitation of the spin system on the picometer length scale and sub-femtosecond time scale, to spin wave generation, and towards the modeling of ultrafast phase transitions that altogether determine the response time of the ferromagnetic system. Today, our current understanding gives rise to the first usage of ultrafast spin physics for ultrafast magnetism control: THz spintronic devices. This makes the field of ultrafast spin-dynamics an emerging topic open for many researchers right now.

  7. Perspective: Ultrafast magnetism and THz spintronics

    Science.gov (United States)

    Walowski, Jakob; Münzenberg, Markus

    2016-10-01

    This year the discovery of femtosecond demagnetization by laser pulses is 20 years old. For the first time, this milestone work by Bigot and coworkers gave insight directly into the time scales of microscopic interactions that connect the spin and electron system. While intense discussions in the field were fueled by the complexity of the processes in the past, it now became evident that it is a puzzle of many different parts. Rather than providing an overview that has been presented in previous reviews on ultrafast processes in ferromagnets, this perspective will show that with our current depth of knowledge the first applications are developed: THz spintronics and all-optical spin manipulation are becoming more and more feasible. The aim of this perspective is to point out where we can connect the different puzzle pieces of understanding gathered over 20 years to develop novel applications. Based on many observations in a large number of experiments. Differences in the theoretical models arise from the localized and delocalized nature of ferromagnetism. Transport effects are intrinsically non-local in spintronic devices and at interfaces. We review the need for multiscale modeling to address the processes starting from electronic excitation of the spin system on the picometer length scale and sub-femtosecond time scale, to spin wave generation, and towards the modeling of ultrafast phase transitions that altogether determine the response time of the ferromagnetic system. Today, our current understanding gives rise to the first usage of ultrafast spin physics for ultrafast magnetism control: THz spintronic devices. This makes the field of ultrafast spin-dynamics an emerging topic open for many researchers right now.

  8. THz identification and Bayes modeling

    Science.gov (United States)

    Sokolnikov, Andre

    2017-05-01

    THz Identification is a developing technology. Sensing in the THz range potentially gives opportunity for short range radar sensing because THz waves can better penetrate through obscured atmosphere, such as fog, than visible light. The lower scattering of THz as opposed to the visible light results also in significantly better imaging than in IR spectrum. A much higher contrast can be achieved in medical trans-illumination applications than with X-rays or visible light. The same THz radiation qualities produce better tomographical images from hard surfaces, e.g. ceramics. This effect comes from the delay in time of reflected THz pulses detection. For special or commercial applications alike, the industrial quality control of defects is facilitated with a lower cost. The effectiveness of THz wave measurements is increased with computational methods. One of them is Bayes modeling. Examples of this kind of mathematical modeling are considered.

  9. Femtosecond study of the effects of ions on the reorientation dynamics of water

    CERN Document Server

    van der Post, Sietse T; Bakker, Huib J

    2013-01-01

    We study the effects of ions on the reorientation dynamics of liquid water with polarization-resolved femtosecond mid-infared spectroscopy. We probe the anisotropy of the excitation of the O-D stretch vibration of HDO molecules in solutions of NaCl, NaI and tetra-alkylammonium bromide salts in 8 percent HDO:H2O. We find that the reorientation O-D groups of HDO molecules hydrating the Cl- and I- anions occurs on two different time scales with time constants of 2pm0.3 ps and 9pm2 ps. The fast component is due to a wobbling motion of the O-D group that keeps the hydrogen bond with the halogenic anion intact. For solutions of tetra-alkylammonium bromide salts we observe a very strong slowing down of the reorientation of water that is associated with the hydration of the hydrophobic alkyl groups of the tetra-alkylammonium ions.

  10. Femtosecond laser-generated high-energy-density states studied by x-ray FELs

    Science.gov (United States)

    Nakatsutsumi, M.; Appel, K.; Baehtz, C.; Chen, B.; Cowan, T. E.; Göde, S.; Konopkova, Z.; Pelka, A.; Priebe, G.; Schmidt, A.; Sukharnikov, K.; Thorpe, I.; Tschentscher, Th; Zastrau, U.

    2017-01-01

    The combination of powerful optical lasers and an x-ray free-electron laser (XFEL) provides unique capabilities to study the transient behaviour of matter in extreme conditions. The high energy density science instrument (HED instrument) at the European XFEL will provide the experimental platform on which an unique x-ray source can be combined with various types of high-power optical lasers. In this paper, we highlight selected scientific examples together with the associated x-ray techniques, with particular emphasis on femtosecond (fs)-timescale pump-probe experiments. Subsequently, we present the current design status of the HED instrument, outlining how the experiments could be performed. First user experiments will start at the beginning of 2018, after which various optical lasers will be commissioned and made available to the international scientific community.

  11. Energy Transfer in Isolated LHC Ⅱ Studied by Femtosecond Pump-Probe Technique

    Institute of Scientific and Technical Information of China (English)

    杨毅; 郭立俊; 刘源; 刘伟民; 朱荣毅; 钱士雄; 徐春和

    2003-01-01

    Excitation energy transfer in the isolated light-harvesting chlorophyll (Chl)-a/b protein complex of photosystem Ⅱ (LHC Ⅱ) was studied by the one-colour pump-probe technique with femtosecond time resolution. After exciting Chl-b by 638 nm beam, the dynamic behaviour shows that the ultrafast energy transfer from Chl-b at positions of B2, B3, and B5 to the corresponding Chl-a molecules in monomeric subunit of LHC Ⅱ is in the time scale of 230 fs. While with the excitation of Chl-a at 678 nm, the energy transfer between excitons of Chl-a molecules has the lifetime of about 370 fs, and two other slow decay components are due to the energy transfer between different Chl-a molecules in a monomeric subunit of LHC Ⅱ or in different subunits, or due to change of molecular conformation.

  12. Energy transfer in isolated LHC II studied by femtosecond pump-probe technique

    CERN Document Server

    Yang Yi; Liu Yuan; Liu Wei Min; Zhu Rong Yi; Qian Shi Xiong; Xu Chun He

    2003-01-01

    Excitation energy transfer in the isolated light-harvesting chlorophyll (Chl)-a/b protein complex of photosystem II (LHC II) was studied by the one-colour pump-probe technique with femtosecond time resolution. After exciting Chl-b by 638nm beam, the dynamic behaviour shows that the ultrafast energy transfer from Chl-b at positions of B2, B3, and B5 to the corresponding Chl-a molecules in monomeric subunit of LHC II is in the time scale of 230fs. While with the excitation of Chl-a at 678nm, the energy transfer between excitons of Chl-a molecules has the lifetime of about 370 fs, and two other slow decay components are due to the energy transfer between different Chl-a molecules in a monomeric subunit of LHC II or in different subunits, or due to change of molecular conformation. (20 refs).

  13. Femtosecond study of exciton dynamics in polyfluorene statistical copolymers in solutions and thin films

    Science.gov (United States)

    Zhang, Jin Z.; Kreger, Melissa A.; Klaerner, Gerrit; Kreyenschmidt, M.; Miller, Robert D.; Scott, J. Campbell

    1997-12-01

    The formation and decay dynamics of photogenerated excitons in polyfluorene statistical co-polymers in solutions and in thin films have been studied using femtosecond transient absorption spectroscopy. In solution photoexcitation of the polymer generates primarily intrachain singlet excitons which are initially hot and then relax quickly (polaron pairs in films at low intensities. At high intensities, the possibility cannot be ruled out completely, especially in relation to the fast decay. If bound polaron pairs are formed as indicated by the fast decay, they must be generated as a result of interaction between excitons on different chains since they are absent at low power, an they must be created and then decay within about 1 ps.

  14. Femtosecond spectroscopic studies of photoinduced electron transfer in MDMO-PPV:ZnO hybrid bulk heterojunctions

    Energy Technology Data Exchange (ETDEWEB)

    Cecchetto, E.; De Cola, L. [Institute of Physics, University of Muenster, Mendelstrasse 7, 48149 Muenster (Germany); Slooff, H. [ECN Solar Energy, P.O. Box 1, 1755 ZG Petten (Netherlands); Zhang, H. [Van ' t Hoff Institute for Molecular Sciences, University of Amsterdam, Nieuwe Achtergracht 129, 1018 WS Amsterdam (Netherlands)

    2007-01-15

    The photophysics of charge carriers (polaron) in MDMO-PPV:ZnO hybrid bulk heterojunction is studied at 80 K by femtosecond transient absorption spectroscopy. A short-lived positive polaron is observed in the blend phase in MDMO-PPV:ZnO blend films with a weight ratio of 1:1 and 1:2. Further increase of ZnO weight ratio results in a significant quenching of the polaron absorption. The results are discussed in the concept that both pristine polymer and MDMO-PPV:ZnO blend phases coexist in the blend films. It is concluded that a polaron is photogenerated within the excitation laser pulse (<100 fs) and electron transfer efficiency is highest in blend films 1:1 and 1:2. Lack of the interfacial area and faster back electron transfer process are discussed to be responsible for the quenching of the electron transfer efficiency in blend film 1:3.

  15. Generation of THz frequency using PANDA ring resonator for THz imaging

    Directory of Open Access Journals (Sweden)

    Ong CT

    2012-02-01

    Full Text Available MA Jalil1, Afroozeh Abdolkarim2, T Saktioto2, CT Ong3, Preecha P Yupapin41Ibnu Sina Institute of Fundamental Science Studies, Nanotechnology Research Alliance, Universiti Teknologi Malaysia (UTM,81310, Johor Bahru, Malaysia; 2Institute of Advanced Photonics Science, Nanotechnology Research Alliance, Universiti Teknologi Malaysia (UTM, 81310, Johor Bahru, Malaysia; 3Department of Mathematics, Universiti Teknologi Malaysia 81310 Skudai, Johor Bahru, Malaysia; 4Nanoscale Science and Engineering Research Alliance (N'SERA, Advanced Research Center for Photonics, Faculty of Science, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, ThailandAbstract: In this study, we have generated terahertz (THz frequency by a novel design of microring resonators for medical applications. The dense wavelength-division multiplexing can be generated and obtained by using a Gaussian pulse propagating within a modified PANDA ring resonator and an add/drop filter system. Our results show that the THz frequency region can be obtained between 40–50 THz. This area of frequency provides a reliable frequency band for THz pulsed imaging.Keywords: THz imaging, THz technology, MRRs, PANDA, add/drop filter

  16. THz optics and metamaterials: Design, fabrication and characterization

    Science.gov (United States)

    Turaga, Shuvan Prashant

    In the past decade, terahertz(THz) based optics and metamaterials have been extensively researched to create components and devices in the frequency range of 0.1 to 5 THz also known as 'THz gap'. Metamaterials, in particular, have realized concepts such as negative refraction, slow light and superlensing through artificially engineered media. The naturally available materials have very weak interaction of terahertz light. Therefore, the design of THz metamaterials to manipulate THz radiation is an important task towards furthering the usage of terahertz light for practical applications. The thesis involved the development of two lab facilities for fabrication and characterization. A state-of-the-art two photon lithography( TPL) system was developed which enables us to manufacture 3D structures with sub-diffraction limit resolution(280nm at 800 nm wavelength). The software was written to enable easy fabrication of multiple structures with different algorithms. For characterizing our metamaterial structures in the terahertz regime, a THz time-domain spectroscopy(THz-TDS) and imaging system was built. This transmission based spectrometer has a dynamic range of 50 dB at 0.5 THz and a bandwidth of about 2.5 THz. To demonstrate the application of these home-built facilities, the metamaterials in the THz regime were fabricated using TPL and UV lithography. To investigate conductive coupling effects in meta-atoms, a new design was proposed, fabricated and characterized. As an application of TPL, free standing polymer helices were fabricated and coated with silver electroless plating. These silver helical metamaterials have potential application as circular polarizers in the MIR and THz regimes. The aspect ratio effects of these helical metamaterials were also studied in order to improve their polarizing performance.

  17. Spectral Trends of Solar Bursts at Sub-THz Frequencies

    Science.gov (United States)

    Fernandes, L. O. T.; Kaufmann, P.; Correia, E.; Giménez de Castro, C. G.; Kudaka, A. S.; Marun, A.; Pereyra, P.; Raulin, J.-P.; Valio, A. B. M.

    2017-01-01

    Previous sub-THz studies were derived from single-event observations. We here analyze for the first time spectral trends for a larger collection of sub-THz bursts. The collection consists of a set of 16 moderate to small impulsive solar radio bursts observed at 0.2 and 0.4 THz by the Solar Submillimeter-wave Telescope (SST) in 2012 - 2014 at El Leoncito, in the Argentinean Andes. The peak burst spectra included data from new solar patrol radio telescopes (45 and 90 GHz), and were completed with microwave data obtained by the Radio Solar Telescope Network, when available. We critically evaluate errors and uncertainties in sub-THz flux estimates caused by calibration techniques and the corrections for atmospheric transmission, and introduce a new method to obtain a uniform flux scale criterion for all events. The sub-THz bursts were searched during reported GOES soft X-ray events of class C or larger, for periods common to SST observations. Seven out of 16 events exhibit spectral maxima in the range 5 - 40 GHz with fluxes decaying at sub-THz frequencies (three of them associated to GOES class X, and four to class M). Nine out of 16 events exhibited the sub-THz spectral component. In five of these events, the sub-THz emission fluxes increased with a separate frequency from that of the microwave spectral component (two classified as X and three as M), and four events have only been detected at sub-THz frequencies (three classified as M and one as C). The results suggest that the THz component might be present throughout, with the minimum turnover frequency increasing as a function of the energy of the emitting electrons. The peculiar nature of many sub-THz burst events requires further investigations of bursts that are examined from SST observations alone to better understand these phenomena.

  18. Characterization of European Lacquers by Terahertz (THz) Reflectometric Imaging

    DEFF Research Database (Denmark)

    Dandolo, Corinna Ludovica Koch; Jepsen, Peter Uhd; Christensen, Mads C.

    2013-01-01

    In this study a European lacquerware replica has been investigated by terahertz (THz) reflectometric imaging. The inspected lacquerware is a wooden panel covered by multiple complex layers of lacquers and plaster. Utilizing pulsed Terahertz Time-Domain Imaging (THz-TDI) in reflection mode, we...

  19. Windowing of THz time-domain spectroscopy signals: A study based on lactose

    Science.gov (United States)

    Vázquez-Cabo, José; Chamorro-Posada, Pedro; Fraile-Peláez, Francisco Javier; Rubiños-López, Óscar; López-Santos, José María; Martín-Ramos, Pablo

    2016-05-01

    Time-domain spectroscopy has established itself as a reference method for determining material parameters in the terahertz spectral range. This procedure requires the processing of the measured time-domain signals in order to estimate the spectral data. In this work, we present a thorough study of the properties of the signal windowing, a step previous to the parameter extraction algorithm, that permits to improve the accuracy of the results. Lactose has been used as sample material in the study.

  20. Femtosecond laser spectroscopy

    CERN Document Server

    Hannaford, Peter

    2005-01-01

    As concepts and methodologies have evolved over the past two decades, the realm of ultrafast science has become vast and exciting and has impacted many areas of chemistry, biology and physics, and other fields such as materials science, electrical engineering, and optical communication. The field has recently exploded with the announcement of a series of remarkable new developments and advances. This volume surveys this recent growth in eleven chapters written by leading international researchers in the field. It includes sections on femtosecond optical frequency combs, soft x-ray femtosecond laser sources, and attosecond laser sources. In addition, the contributors address real-time spectroscopy of molecular vibrations with sub-5-fs pulses and multidimensional femtosecond coherent spectroscopies for studying molecular and electron dynamics. Novel methods for measuring and characterizing ultrashort laser pulses and ultrashort pulses of light are also described. The topics covered are revolutionizing the field...

  1. Compact and high-power broadband terahertz source based on femtosecond photonic crystal fiber amplifier

    Institute of Scientific and Technical Information of China (English)

    Feng Liu; Lu Chai; Qirong Xing; Chingyue Wang; Weili Zhang; Xiaokun Hu; Jiang Li; Changlei Wang; Yi Li; Yanfeng Li; YoujianSong; Bowen Liu; Minglie Hu

    2011-01-01

    Terahertz (THz) waves,generally defined in the 0.1-10 THz range are finding growing applications in various important fields[1-4] such as imaging,food and pharmaceutical quality coutrol,security screening,and standoff detection of bio-threat species,among which THz timedomain spectroscopy (THz-TDS)[5] is particularly appealing.However,the low conversion efficiency and low power of typical broadband THz sources severely hinder the utility and realization of the full potential of THzTDS.Recently,there have been efforts to generate THz pulses using compact pump sources in fiber format[6,7].%We present a review of the development of a compact and high-power broadband terahertz (THz) source optically excited by a femtosecond photonic crystal fiber (PCF) amplifier. The large mode area of the PCF and the stretcher-free configuration make the pump source compact and very efficient. Broadband THz pulseg of 150 μW extending from 0.1 to 3.5 TH2 are generated from a 3-mm-thick GaP crystal through optical rectification of 12-W pump pulses with duration of 66 & and a repetition rate of 52 MHz. A strong saturation effect is observed, which is attributed to pump pulse absorption; a Z-scan measurement shows that three-photon absorption dominates the nonlinear absorption when the crystal is pumped by femtosecond pulses at 1040 run. A further scale-up of the THz source power is expected to find important applications in THz nonlinear optics and nonlinear THz spectroscope

  2. The theory study of Metal absorptivity in femtosecond pulsed laser ablation

    Institute of Scientific and Technical Information of China (English)

    LI Li; ZHANG Duan-ming; LI Zhi-hua; TAN Xin-yu; FANG Ran-ran

    2007-01-01

    In this paper,the effect of the absorptivity of metal on femtosecond pulsed laser ablation is investigated.The formulas for the absorptivity depending on target temperature are derived from Maxwell Equations and the Lambert-Beer's law.Based on this,a new two-temperature model is proposed to describe the femtosecond pulsed laser ablation with metal.Then,using Au as an example,a finite difference method is employed to simulate the space-dependent and time-dependent absorptivity and the target temperature.The temperature evolution of our model is compared with the result obtained form the heat conduction model taking the absorptivity as constant.It is shown that the absorptivity plays an important role in the femtosecond pulsed laser ablation.The results of this paper are helpful in choosing the best technical parameters in femtosecond pulsed laser ablation.

  3. Fizeau Interferometery for THz-Waves' Frequency and Intensity Measurement

    Institute of Scientific and Technical Information of China (English)

    SIDDIQUE Muhammad; YANG Su-hui; LI Zhuo; LI Ping

    2007-01-01

    A terahertz-wave generator based on optical parametric oscillator principle, detection based on combination of Fizeau wedged interferometer and an electro-optical crystal ZnTe has been studied. The analytical solution based on the basic principle of operation of solid wedge Fizeau interferometer has been realized. The mathematical calculations for THz frequency and intensity measurement dependent on wedge angle and fringe spacing have been considered. The efficiency of THz wave detection depends upon optimized wedge angle has been also realized. The feasibility of detection of THz waves' frequency and intensity by solid Fizeau interferometer (THz-waves' range of 1-3THz) has been studied. By optimization of other parameters like thickness of Fizeau film, refractive index, material of Fizeau film, we can proceed towards the design of Fizeau interferometer for required research plans as it is a simple and inexpensive interferometer.

  4. Perspective: On the relevance of slower-than-femtosecond time scales in chemical structural-dynamics studies

    Directory of Open Access Journals (Sweden)

    Philip Coppens

    2015-03-01

    Full Text Available A number of examples illustrate structural-dynamics studies of picosecond and slower photo-induced processes. They include molecular rearrangements and excitations. The information that can be obtained from such studies is discussed. The results are complementary to the information obtained from femtosecond studies. The point is made that all pertinent time scales should be covered to obtain comprehensive insight in dynamic processes of chemical and biological importance.

  5. Terahertz (THZ) Imaging

    Science.gov (United States)

    2006-03-01

    characteristics as a result of various types of tooth decay are reported showing the potential of this technique for dental diagnosis. 20. Herrmann...Identification of tooth decay using terahertz imaging and spectroscopy” Infrared and Millimeter Waves, 2002. Conference Digest. Twenty Seventh...applications such as detection of skin, tooth and breast cancer. The design and working of a THz imaging system capable of generating a usable

  6. THz time-domain spectroscopy for tokamak plasma diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Causa, F.; Zerbini, M.; Buratti, P.; Gabellieri, L.; Pacella, D.; Romano, A.; Tuccillo, A. A.; Tudisco, O. [ASSOCIAZIONE EURATOM ENEA sulla Fusione, C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma) (Italy); Johnston, M. [Clarendon Laboratory, Department of Physics, University of Oxford, Parks Road, Oxford OX1 3PU (United Kingdom); Doria, A.; Gallerano, G. P.; Giovenale, E. [ENEA C.R. Frascati UTAPRAD, via E. Fermi 45, 00044 Frascati (Roma) (Italy)

    2014-08-21

    The technology is now becoming mature for diagnostics using large portions of the electromagnetic spectrum simultaneously, in the form of THz pulses. THz radiation-based techniques have become feasible for a variety of applications, e.g., spectroscopy, imaging for security, medicine and pharmaceutical industry. In particular, time-domain spectroscopy (TDS) is now being used also for plasma diagnostics in various fields of application. This technique is promising also for plasmas for fusion applications, where plasma characteristics are non-uniform and/or evolve during the discharge This is because THz pulses produced with femtosecond mode-locked lasers conveniently span the spectrum above and below the plasma frequency and, thus, can be used as very sensitive and versatile probes of widely varying plasma parameters. The short pulse duration permits time resolving plasma characteristics while the large frequency span permits a large dynamic range. The focus of this work is to present preliminary experimental and simulation results demonstrating that THz TDS can be realistically adapted as a versatile tokamak plasma diagnostic technique.

  7. THz time-domain spectroscopy of amino acids

    Institute of Scientific and Technical Information of China (English)

    WANG Weining; YUE Weiwei; YAN Haitao; ZHANG Cunlin; ZHAO Guozhong

    2005-01-01

    The optical characteristics of four kinds of amino acids (tyrosine, arginine, histidine and glutamine) filled with nitrogen at room temperature were studied by THz time-domain spectroscopy (THz-TDS). Well-resolved absorption and refractive spectrums between 0.1 and 2.8 THz were obtained based on the physical model for extracting the optical parameters of materials in THz range. The results not only fill up the spectra gap of amino acids in far-infrared range, supply data for amino acid molecular identification and conformation analysis, but also demonstrate significantly potential to promote the research and application of biological materials in bio-chemical and medical fields by THz-TDS.

  8. Cyclotron Resonance Gain for FIR and THz Radiation in Graphene

    CERN Document Server

    Cole, Nightvid

    2016-01-01

    A cyclotron resonance maser source using low-effective-mass conduction electrons in graphene, if successful, would allow for generation of Far Infrared (FIR) and Terahertz (THz) radiation without requiring magnetic fields running into the tens of Tesla. In order to investigate this possibility, we consider a device in which electrons are effectively injected via pumping from the valence band to the conduction band using an infrared (IR) laser source, subsequently gyrate in a magnetic field applied perpendicular to the plane of the graphene, and give rise to gain for a FIR/THz wave crossing the plane of the graphene. A set of integral expressions is derived by assuming that the non-radiative energy loss processes of the electrons can be adequately represented by a damping force proportional and antiparallel to their momentum. Minimal gain may occur at very short electron damping times of hundreds of femtoseconds.

  9. Aligned copper nanorod arrays for highly efficient generation of intense ultra-broadband THz pulses

    CERN Document Server

    Mondal, S; Ding, W J; Hafez, H A; Fareed, M A; Laramée, A; Ropagnol, X; Zhang, G; Sun, S; Sheng, Z M; Zhang, J; Ozaki, T

    2016-01-01

    We demonstrate an intense broadband terahertz (THz) source based on the interaction of relativistic-intensity femtosecond lasers with aligned copper nanorod array targets. For copper nanorod targets with length 5 \\mu m, a maximum 13.8 times enhancement in the THz pulse energy (in $\\leq$ 20 THz spectral range) is measured as compared to that with a thick plane copper target under the same laser conditions. A further increase in the nanorod length leads to a decrease in the THz pulse energy at medium frequencies ($\\leq$ 20THz) and increase of the electromagnetic pulse energy in the high-frequency range (from 20 - 200 THz). For the latter, we measure a maximum energy enhancement of 28 times for the nanorod targets of length 60 \\mu m . Particle-in-cell simulations reveal that THz pulses are mostly generated by coherent transition radiation of laser produced hot electrons, which are efficiently enhanced with the use of nanorod targets. Good agreement is found between the simulation and experimental results.

  10. Ultrabroadband THz spectroscopy of disordered materials

    DEFF Research Database (Denmark)

    Zalkovskij, Maksim; Malureanu, Radu; Lavrinenko, Andrei

    2011-01-01

    We perform THz spectroscopic investigations of the dielectric function of disordered materials in the THz region. Specifically, we consider amorphous materials and perform ultrabroadband THz spectroscopy of chalcogenide glasses where we observe the transition from universal scaling...

  11. Semiconductor saturable absorbers for ultrafast THz signals

    DEFF Research Database (Denmark)

    Hoffmann, Matthias C.; Turchinovich, Dmitry

    We demonstrate saturable absorber behavior of n-type semiconductors in the THz frequency range using nonlinear THz spectroscopy. Further, we observe THz pulse shortening and increase of the group refractive index at high field strengths....

  12. Corrugated capillary as THz Cherenkov Smith-Purcell radiator

    Science.gov (United States)

    Lekomtsev, K. V.; Aryshev, A. S.; Tishchenko, A. A.; Ponomarenko, A. A.; Sukharev, V. M.; Terunuma, N.; Urakawa, J.; Strikhanov, M. N.

    2016-07-01

    In this article we discussed Particle In Cell electromagnetic simulations and mechanical design of dielectric capillaries that produce THz Cherenkov Smith-Purcell radiation (ChSPR), arising when a femtosecond electron multi-bunch beam propagates through corrugated and non-corrugated dielectric capillaries with metallic radiation reflectors. We investigated the influence of the four-bunch beam on the SPR field spectrum and on the ChSPR power spectrum, and the influence of the non-central beam propagation on the ChSPR power spectrum. We also discussed the design and assembly of the capillaries, constructed as sets of cylindrical rings.

  13. Ultrafast THz Saturable Absorption in Doped Semiconductors

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Hoffmann, Matthias C.

    2011-01-01

    We demonstrate ultrafast THz saturable absorption in n-doped semiconductors by nonlinear THz time-domain spectroscopy. This effect is caused by the semiconductor conductivity modulation due to electron heating and satellite-valley scattering in strong THz fields.......We demonstrate ultrafast THz saturable absorption in n-doped semiconductors by nonlinear THz time-domain spectroscopy. This effect is caused by the semiconductor conductivity modulation due to electron heating and satellite-valley scattering in strong THz fields....

  14. Ultra-short laser pulse ablation using shear-force feedback: Femtosecond laser induced breakdown spectroscopy feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Samek, Ota [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany)]. E-mail: samek@ansci.de; Kurowski, Andre [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany); Kittel, Silke [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany); Kukhlevsky, Sergei [Institute of Physics, University of Pecs, Ifjusag u. 6, Pecs 7624 (Hungary); Hergenroeder, Roland [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany)

    2005-08-31

    This work reports on a feasibility study of proximity ablation using femtosecond pulses. Ultra-short pulses were launched to a bare tapered optical fiber and delivered to the sample. The tip-sample distance was controlled by means of shear-force feedback. Consequently, ablation craters with submicrometer dimensions were obtained. Potential analytical applications for Laser Induced Breakdown Spectroscopy (LIBS) technique, such as e.g. inclusions in steel or bio cells, are suggested.

  15. A review on the sub-THz/THz gyrotrons

    Science.gov (United States)

    Kumar, Nitin; Singh, Udaybir; Bera, Anirban; Sinha, A. K.

    2016-05-01

    A review on the sub-THz/THz gyrotrons is performed in this manuscript. The present development status of gyrotrons can be divided into three streams for the sake of better understanding: 1. low frequency (industrial applications, 2. very high power (1 MW or more), medium frequency (100-200 GHz) gyrotrons for plasma fusion applications, 3. low power (few tens of watt to kW), high frequency (>200 GHz) gyrotrons for various innovative applications. In this manuscript, the third stream of gyrotron development is reviewed. In last few decades several innovative applications are searched in sub-THz/THz band where the gyrotrons could be used as an efficient source of RF radiation. The applications of sub-THz/THz gyrotrons including the futuristic scope of the device are also discussed in this article. Further, several criticalities arise in the design and development when the gyrotron operation shifts toward the high frequency band. Various such design and technological challenges are also discussed here. Finally the development status of sub-THz/THz gyrotrons as per the use in various scientific and technological applications is also discussed.

  16. Femtosecond two-photon photoassociation of hot magnesium atoms: A quantum dynamical study using thermal random phase wavefunctions

    Energy Technology Data Exchange (ETDEWEB)

    Amaran, Saieswari; Kosloff, Ronnie [Fritz Haber Research Centre and The Department of Physical Chemistry, Hebrew University, Jerusalem 91904 (Israel); Tomza, Michał; Skomorowski, Wojciech; Pawłowski, Filip; Moszynski, Robert [Department of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland); Rybak, Leonid; Levin, Liat; Amitay, Zohar [The Shirlee Jacobs Femtosecond Laser Research Laboratory, Schulich Faculty of Chemistry, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Berglund, J. Martin; Reich, Daniel M.; Koch, Christiane P. [Theoretische Physik, Universität Kassel, Heinrich-Plett-Straße 40, 34132 Kassel (Germany)

    2013-10-28

    Two-photon photoassociation of hot magnesium atoms by femtosecond laser pulses, creating electronically excited magnesium dimer molecules, is studied from first principles, combining ab initio quantum chemistry and molecular quantum dynamics. This theoretical framework allows for rationalizing the generation of molecular rovibrational coherence from thermally hot atoms [L. Rybak, S. Amaran, L. Levin, M. Tomza, R. Moszynski, R. Kosloff, C. P. Koch, and Z. Amitay, Phys. Rev. Lett. 107, 273001 (2011)]. Random phase thermal wavefunctions are employed to model the thermal ensemble of hot colliding atoms. Comparing two different choices of basis functions, random phase wavefunctions built from eigenstates are found to have the fastest convergence for the photoassociation yield. The interaction of the colliding atoms with a femtosecond laser pulse is modeled non-perturbatively to account for strong-field effects.

  17. Control of chemical reaction pathways by femtosecond ponderomotive forces: Time-resolved multiphoton ionization spectroscopic study of OCIO photodissociation

    Science.gov (United States)

    Blackwell, M.; Ludowise, P.; Chen, Y.

    1997-07-01

    Femtosecond time-resolved multiphoton ionization spectroscopy is applied to the study of the photodissociation of OClO. The observed ratio of O2+/ClO+ signal increases 12-fold with a 3-fold increase of the pump laser intensity. They are attributed to the change in the branching ratio between the two independent reaction channels leading to Cl+O2 and ClO+O, respectively. We believe this is the first experimental demonstration of laser controlled chemical reactions by femtosecond ponderomotive forces. At low pump power, the photodissociation dynamics at 386 nm is shown to be a two-step process, with the OClO slowly approaching (time constant 4.6 ps) a transition state that falls apart rapidly (time constant 250 fs).

  18. Systematic study of spatiotemporal dynamics of intense femtosecond laser pulses in BK-7 glass

    Indian Academy of Sciences (India)

    Ram Gopal; V Deepak; S Sivaramakrishnan

    2007-04-01

    In this paper we present a systematic study of the spatial and temporal effects of intense femtosecond laser pulses in BK-7 over a broad range of input powers, 1–1000 times the critical power for self-focusing (cr) by numerically solving the nonlinear Schrödinger equation (NLS). Most numerical studies have not been extended to such high powers. A clear-cut classification of spatio-temporal dynamics up to very high powers into three regimes – the group-velocity dispersion (GVD) regime, the ionization regime and the dominant plasma regime – as done here, is a significant step towards a better understanding. Further, we examine in detail the role of GVD in channel formation by comparing BK-7 to an `artificial' medium. Our investigations bring forth the important observation that diffraction plays a minimal role in the formation of multiple cones and that plasma plays a diffraction-like role at very high powers. A detailed study of the spatio-temporal dynamics in any condensed medium over this range of powers has not been reported hitherto, to the best of our knowledge. We also suggest appropriate operational powers for various applications employing BK-7 on the basis of our results.

  19. Comparison of two photosensitizers in photodynamic therapy using light pulses in femtosecond regime: an animal study

    Science.gov (United States)

    Grecco, Clóvis; Pratavieira, Sebastião.; Bagnato, Vanderlei; Kurachi, Cristina

    2016-03-01

    Photodynamic therapy is a therapeutic modality for cancer treatment based on the interaction of light with a sensitizer agent and molecular oxygen present into the target cells. The aim of this study is the evaluation of photodynamic therapy using pulsed light source in the femtosecond regime through necrosis induced in healthy rat liver. The induced necrosis profile with CW laser and pulsed laser were evaluated in animal model, which received Photodithazine (chlorine e6 derivative). The light sources used in these studies were a 660 nm CW diode laser and a Ti:Sapphire Regenerative Amplifier laser (1 kHz repetition rate and 100 fs pulse width) associated with an optical parametric amplifier (OPA) to convert to 660 nm. The results were compared with a previous study when was used a hematoporphyrin derivative (Photogem) as a sensitizer. The induced necrosis with Photogen was greater with pulsed laser (2.0 +/- 0.2 mm) in comparison with CW laser (1.0 ± 0.2 mm), while in Photodithazine the induced necrosis with was greater with CW laser (2.9 +/- 0.2 mm) comparing the pulsed laser (2.0 +/- 0.2 mm). These results indicate dependence of PDT mechanisms with photosensitizer and the light regime applied.

  20. Very High Power THz Radiation Sources

    OpenAIRE

    Carr, G.L.; Martin, M. C.; McKinney, W.R.; Jordan, K.; Neil, G. R.; Williams, G. P.

    2003-01-01

    We report the production of high power (20watts average, ∼ 1 Megawatt peak) broadbandTHz light based on coherent emission fromrelativistic electrons. Such sources areideal for imaging, for high power damagestudies and for studies of non-linearphenomena in this spectral range. Wedescribe the source, presenting theoreticalcalculations and their experimentalverification. For clarity we compare thissource with one based on ultrafast lasertechniques.

  1. Dielectric THz waveguides

    Science.gov (United States)

    Dupuis, Alexandre

    In this thesis we have explored a wide variety of dielectric waveguides that rely on many different waveguiding mechanisms to guide THz (far-infrared) radiation. We have explored both theoretically and experimentally a large number of waveguide designs with the aim of reducing propagation and bending losses. The different waveguides can be classified into two fundamentally different strategies for reducing the propagation loss: small-core single-mode evanescent-field fibers or large hollow-core multi-mode tubes. Our focus was first set on exploring the small-core evanescent-field fiber strategy for reducing propagation losses. Following initial theoretical work in our group, much effort was spent on the fabrication and measurement of evanescent porous subwavelength diameter plastic fibers, in an attempt to further reduce the propagation losses. The fabrication of such fibers is a challenge and many novel techniques were devised to enable fiber drawing without hole collapse. The first method sealed the holes of an assembly of polymer tubes and lead to fibers of relatively low porosity (˜25% air within the core) due to reduction in hole size during fiber drawing. The second method was a novel sacrificial polymer technique whereby drawing a completely solid fiber prevented any hole collapse and the subsequent dissolution of the sacrificial polymer revealed the holes in the fiber. The third method was a combination of preform casting using glass molds and drawing with pressurized air within the holes. This led to fibers of record porosity (86% air). The measurement of these porous fibers began with a collaboration with a group from the university of Sherbrooke. At the time, the only available detector was a frequency integrating liquid-helium-cooled bolometer (powermeter). A novel directional coupler method for measuring the losses of subwavelength fibers was developed whereby an evanescent coupler is formed by bringing a probe fiber in proximity to the sample fiber

  2. Femtosecond pump-probe studies of actinic-wavelength dependence in aqueous chlorine dioxide photochemistry

    Science.gov (United States)

    Bixby, Teresa J.; Bolinger, Joshua C.; Patterson, Joshua D.; Reid, Philip J.

    2009-04-01

    The actinic or photolysis-wavelength dependence of aqueous chlorine dioxide (OClO) photochemistry is investigated using femtosecond pump-probe spectroscopy. Following photoexcitation at 310, 335, and 410 nm the photoinduced evolution in optical density is measured from the UV to the near IR. Analysis of the optical-density evolution illustrates that the quantum yield for atomic chlorine production (ΦCl) increases with actinic energy, with ΦCl=0.16±0.02 for 410 nm excitation and increasing to 0.25±0.01 and 0.54±0.10 for 335 and 310 nm excitations, respectively. Consistent with previous studies, the production of Cl occurs through two channels, with one channel corresponding to prompt (<5 ps) Cl formation and the other corresponding to the thermal decomposition of ClOO formed by OClO photoisomerization. The partitioning between Cl production channels is dependent on actinic energy, with prompt Cl production enhanced with an increase in actinic energy. Limited evidence is found for enhanced ClO production with an increase in actinic energy. Stimulated emission and excited-state absorption features associated with OClO populating the optically prepared A22 surface decrease with an increase in actinic energy suggesting that the excited-state decay dynamics are also actinic energy dependent. The studies presented here provide detailed information on the actinic-wavelength dependence of OClO photochemistry in aqueous solution.

  3. Study on impurity desorption induced by femtosecond pulse laser based on a stochastic process model

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With the advantages on non-equilibrium heating and desorption induced by electronic transition, the femtosecond pulse laser introduces a new way for solving the problem of impurity pollution adsorbed on a solid thin film in micro-electro-mechanical systems (MEMS). A model based on stochastic processes was established for stimulated desorption induced by the femtosecond pulse laser to interpret the interaction of the optically excited hot electrons with the adsorbed molecules in a metal substrate. Numerical simulation results reveal a time-dependent desorption probability of adsorbed molecules and indicate that how key parameters of femtosecond pulse laser, such as incident laser energy flux, pulse duration, and wavelength of pulse, have a great effect on the desorption probability.

  4. Femtosecond Transient Absorption Studies in Cadmium Selenide Nanocrystal Thin Films Prepared by Chemical Bath Deposition Method

    Directory of Open Access Journals (Sweden)

    M. C. Rath

    2007-01-01

    Full Text Available Dynamics of photo-excited carrier relaxation processes in cadmium selenide nanocrystal thin films prepared by chemical bath deposition method have been studied by nondegenerate femtosecond transient pump-probe spectroscopy. The carriers were generated by exciting at 400 nm laser light and monitored by several other wavelengths. The induced absorption followed by a fast bleach recovery observed near and above the bandgap indicates that the photo-excited carriers (electrons are first trapped by the available traps and then the trapped electrons absorb the probe light to show a delayed absorption process. The transient decay kinetics was found to be multiexponential in nature. The short time constant, <1 picosecond, was attributed to the trapping of electrons by the surface and/or deep traps and the long time constant, ≥20 picoseconds, was due to the recombination of the trapped carriers. A very little difference in the relaxation processes was observed in the samples prepared at bath temperatures from 25∘C to 60∘C.

  5. Femtosecond studies of nonlinear optical switching in GaAs waveguides using time-domain interferometry

    Science.gov (United States)

    Anderson, Kristin K.; LaGasse, Michael J.; Haus, Hermann A.; Fujimoto, James G.

    1990-05-01

    We describe the application of a new femtosecond measurement technique, time division interferometry, for investigating the transient nonlinear index in waveguides. This technique performs an interferometric measurement using a time division multiplexed reference pulse and achieves high sensitivity with increased immunity to acoustic and thermal parasitics. Using a tunable femtosecond laser source, direct measurements of the wavelength dependent nonresonant nonlinear index have been performed in A1GaAs waveguides. In addition, conventional pump and probe absorption measurements permit the investigation of carrier dynamics, band filling, and two photon absorption effects. Two photon absorption is found to be a potentially serious limiting effect for obtaining all optical switching.

  6. Simulation of FEL pulse length calculation with THz streaking method

    Energy Technology Data Exchange (ETDEWEB)

    Gorgisyan, I., E-mail: ishkhan.gorgisyan@psi.ch [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); École Polytechnique Fédérale de Lausanne, Route Cantonale, 1015 Lausanne (Switzerland); Ischebeck, R.; Prat, E.; Reiche, S. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Rivkin, L. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); École Polytechnique Fédérale de Lausanne, Route Cantonale, 1015 Lausanne (Switzerland); Juranić, P., E-mail: ishkhan.gorgisyan@psi.ch [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland)

    2016-04-02

    Simulation of THz streaking of photoelectrons created by X-ray pulses from a free-electron laser and reconstruction of the free-electron laser pulse lengths. Having accurate and comprehensive photon diagnostics for the X-ray pulses delivered by free-electron laser (FEL) facilities is of utmost importance. Along with various parameters of the photon beam (such as photon energy, beam intensity, etc.), the pulse length measurements are particularly useful both for the machine operators to measure the beam parameters and monitor the stability of the machine performance, and for the users carrying out pump–probe experiments at such facilities to better understand their measurement results. One of the most promising pulse length measurement techniques used for photon diagnostics is the THz streak camera which is capable of simultaneously measuring the lengths of the photon pulses and their arrival times with respect to the pump laser. This work presents simulations of a THz streak camera performance. The simulation procedure utilizes FEL pulses with two different photon energies in hard and soft X-ray regions, respectively. It recreates the energy spectra of the photoelectrons produced by the photon pulses and streaks them by a single-cycle THz pulse. Following the pulse-retrieval procedure of the THz streak camera, the lengths were calculated from the streaked spectra. To validate the pulse length calculation procedure, the precision and the accuracy of the method were estimated for streaking configuration corresponding to previously performed experiments. The obtained results show that for the discussed setup the method is capable of measuring FEL pulses with about a femtosecond accuracy and precision.

  7. Ultrafast properties of femtosecond-laser-ablated GaAs and its application to terahertz optoelectronics.

    Science.gov (United States)

    Madéo, Julien; Margiolakis, Athanasios; Zhao, Zhen-Yu; Hale, Peter J; Man, Michael K L; Zhao, Quan-Zhong; Peng, Wei; Shi, Wang-Zhou; Dani, Keshav M

    2015-07-15

    We report on the first terahertz (THz) emitter based on femtosecond-laser-ablated gallium arsenide (GaAs), demonstrating a 65% enhancement in THz emission at high optical power compared to the nonablated device. Counter-intuitively, the ablated device shows significantly lower photocurrent and carrier mobility. We understand this behavior in terms of n-doping, shorter carrier lifetime, and enhanced photoabsorption arising from the ablation process. Our results show that laser ablation allows for efficient and cost-effective optoelectronic THz devices via the manipulation of fundamental properties of materials.

  8. Theoretical and Experimental studies on CH{sub 3}OH THz Laser Pumped by Pulse Carbon Dioxide Laser

    Energy Technology Data Exchange (ETDEWEB)

    Fei Fei; Wang Jing; Tian Zhaoshuo; Zhang Yanchao; Fu Shiyou; Wang Qi, E-mail: tianzhaoshuo@126.com [Information Optoelectronics Research Institute, Harbin Institute of Technology at Weihai, Sandong, Weihai, 264209 (China)

    2011-02-01

    In this paper, according to the molecular structure and vibration mode of micro-asymmetric gyroscope CH{sub 3}OH molecule, dynamic process of optically pumped Terahertz laser is analyzed theoretically. The rate equation models based on three level systems are given according to the theory of typical laser rate equation. The output THz pulsed laser waveform is obtained by solving the rate equation model. An all-metal Terahertz laser pumped by RF waveguide carbon dioxide laser is designed with CH{sub 3}OH as its working gas. The pulsed Terahertz laser output is obtained. The waveform and repetition frequency of the optically pumped laser are measured in the experiments. The Terahertz laser designed does not need water cooling system. It also has the advantages of simple structure and small size.

  9. Present Status and Results from the KAERI Compact THz FEL Facility

    CERN Document Server

    Jeong, Y U; Lee, B C; Park, S H

    2005-01-01

    We have developed a laboratory-scale users facility with a compact terahertz (THz) free electron laser (FEL). The FEL operates in the wavelength range of 100-1200 μm, which corresponds to 0.3-3 THz. The peak power of the FEL micropulse having 30 ps pulse duration is 1 kW and the pulse energy of the 3-μs-FEL-macropulse is approximately 0.3 mJ. The main application of the FEL is THz imaging for bio-medical researches. Transmitted THz imaging of various samples including bugs have been measured. The samples were scanned by a 2-dimensional stage at the focal point of the THz beam. The bugs were not dry because they were killed just before experiments. We could get the transmitted THz imaging of the bugs at 3 THz with the high power THz FEL. THz spectral characteristics of several materials have been studied by the FEL and a THz FTIR spectrometer. We will introduce recent results on the imaging and spectroscopy by the THz FEL.

  10. Novel drift compensation for a femtosecond laser system at a quasi-cw electron accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Green, Bertram; Kuntzsch, Michael; Kovalev, Sergei; Gensch, Michael [Helmholtz-Zentrum Dresden-Rossendorf (Germany)

    2013-07-01

    A method for electron beam/THz to femtosecond (fs)-laser synchronization drift correction at the quasi-cw linear electron accelerator ELBE is presented, which is utilizing THz radiation generated by a CDR/CTR screen and an undulator respectively. Measurements of these pulses will allow for compensation of slow drifts in the arrival time on millisecond timescales between the THz and the fs-laser pulses. The method requires two electro-optic detection setups which allow for the sampling of a single THz pulse, at two different working points. Given a consistent pulse shape these two data points can provide information on the sign of the arrival time drift relative to the laser. This information can be used both for providing feedback on fs laser arrival time in a potential THz time domain experiment as well as the electron bunch arrival time in the accelerator.

  11. Experiments and Computational Theory for Electrical Breakdown in Critical Components: THz Imaging of Electronic Plasmas.

    Energy Technology Data Exchange (ETDEWEB)

    Zutavern, Fred J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hjalmarson, Harold P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bigman, Verle Howard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gallegos, Richard Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-11-01

    This report describes the development of ultra-short pulse laser (USPL) induced terahertz (THz) radiation to image electronic plasmas during electrical breakdown. The technique uses three pulses from two USPLs to (1) trigger the breakdown, (2) create a 2 picosecond (ps, 10 -12 s), THz pulse to illuminate the breakdown, and (3) record the THz image of the breakdown. During this three year internal research program, sub-picosecond jitter timing for the lasers, THz generation, high bandwidth (BW) diagnostics, and THz image acquisition was demonstrated. High intensity THz radiation was optically-induced in a pulse-charged gallium arsenide photoconductive switch. The radiation was collected, transported, concentrated, and co-propagated through an electro-optic crystal with an 800 nm USPL pulse whose polarization was rotated due to the spatially varying electric field of the THz image. The polarization modulated USPL pulse was then passed through a polarizer and the resulting spatially varying intensity was detected in a high resolution digital camera. Single shot images had a signal to noise of %7E3:1. Signal to noise was improved to %7E30:1 with several experimental techniques and by averaging the THz images from %7E4000 laser pulses internally and externally with the camera and the acquisition system (40 pulses per readout). THz shadows of metallic films and objects were also recorded with this system to demonstrate free-carrier absorption of the THz radiation and improve image contrast and resolution. These 2 ps THz pulses were created and resolved with 100 femtosecond (fs, 10 -15 s) long USPL pulses. Thus this technology has the capability to time-resolve extremely fast repetitive or single shot phenomena, such as those that occur during the initiation of electrical breakdown. The goal of imaging electrical breakdown was not reached during this three year project. However, plans to achieve this goal as part of a follow-on project are described in this document

  12. Targeted femtosecond laser driven drug delivery within HIV-1 infected cells: in-vitro studies

    Science.gov (United States)

    Maphanga, Charles; Ombinda-Lemboumba, Saturnin; Manoto, Sello; Maaza, Malik; Mthunzi-Kufa, Patience

    2017-02-01

    Human immunodeficiency virus (HIV-1) infection still remains one amongst the world's most challenging infections since its discovery. Antiretroviral therapy is the recommended treatment of choice for HIV-1 infection taken by patients orally. The highly active antiretroviral therapy (HAART) prevents the replication of HIV-1 and further destruction of the immune system, therefore enabling the body to fight opportunistic life-threatening infections, cancers, and also arrest HIV infection from advancing to AIDS. The major challenge with HAART is the inability to reach the viral reservoirs where the HIV-1 remains latent and persistent, leading to inability to fully eradicate the virus. This study is aimed at initially designing and assembling a fully functional optical translocation setup to optically deliver antiretroviral drugs into HIV-1 infected cells in a targeted manner using Gaussian beam mode femtosecond laser pulses in-vitro. The main objective of our study is to define the in-vitro drug photo-translocation parameters to allow future design of an efficient drug delivery device with potential in-vivo drug delivery applications. In our experiments, HEK 293T cells were used to produce HIV-1 enveloped pseudovirus (ZM53) to infect TZM-bl cells which were later treated with laser pulses emitted by a titanium sapphire laser (800 nm, 1KHz, 113 fs, 6.5 μW) to create sub-microscopic pores on the cell membrane enabling influx of extracellular media. Following laser treatment, changes in cellular responses were analysed using cell morphology studies, cytotoxicity, and luciferase assay studies. Controls included laser untreated cells incubated with the drug for 72 hours. The data in this study was statistically analysed using the SigmaPlot software version 13.

  13. Novel ultrasensitive plasmonic detector of terahertz pulses enhanced by femtosecond optical pulses

    Science.gov (United States)

    Shur, M.; Rudin, S.; Rupper, G.; Muraviev, A.

    2016-09-01

    Plasmonic Field Effect Transistor detectors (first proposed in 1996) have emerged as superior room temperature terahertz (THz) detectors. Recent theoretical and experimental results showed that such detectors are capable of subpicosecond resolution. Their sensitivity can be greatly enhanced by applying the DC drain-to-source current that increases the responsivity due to the enhanced non-linearity of the device but also adds 1/f noise. We now propose, and demonstrate a dramatic responsivity enhancement of these plasmonic THz pulse detectors by applying a femtosecond optical laser pulse superimposed on the THz pulse. The proposed physical mechanism links the enhanced detection to the superposition of the THz pulse field and the rectified optical field. A femtosecond pulse generates a large concentration of the electron-hole pairs shorting the drain and source contacts and, therefore, determining the moment of time when the THz induced charge starts discharging into the transmission line connecting the FET to an oscilloscope. This allows for scanning the THz pulse with the strongly enhanced sensitivity and/or for scanning the response waveform after the THz pulse is over. The experimental results obtained using AlGaAs/InGaAs deep submicron HEMTs are in good agreement with this mechanism. This new technique could find numerous imaging, sensing, and quality control applications.

  14. Femtosecond Electron Diffraction Study of the Cyclization Reaction in Crystalline Diarylethene

    Directory of Open Access Journals (Sweden)

    Sciaini G.

    2013-03-01

    Full Text Available Femtosecond electron diffraction is used to directly resolve the atomic motions involved in the ring closing reaction induced in a photochromic single crystal. The measurements were performed using our newly developed setup capable of delivering sub-500 fs electron bunches containing 106 electrons per pulse. Theoretical calculations were also performed.

  15. Femtosecond study of self-trapped vibrational excitons in crystalline acetanilide

    DEFF Research Database (Denmark)

    Edler, J.; Hamm, Peter; Scott, Alwyn C.

    2002-01-01

    Femtosecond IR spectroscopy of delocalized NH excitations of crystalline acetanilide confirms that self-trapping in hydrogen-bonded peptide units exists and does stabilize the excitation. Two phonons with frequencies of 48 and 76 cm(-1) are identified as the major degrees of freedom that mediate ...

  16. High-power femtosecond-terahertz pulse induces a wound response in mouse skin

    Science.gov (United States)

    Kim, Kyu-Tae; Park, Jaehun; Jo, Sung Jin; Jung, Seonghoon; Kwon, Oh Sang; Gallerano, Gian Piero; Park, Woong-Yang; Park, Gun-Sik

    2013-08-01

    Terahertz (THz) technology has emerged for biomedical applications such as scanning, molecular spectroscopy, and medical imaging. Although a thorough assessment to predict potential concerns has to precede before practical utilization of THz source, the biological effect of THz radiation is not yet fully understood with scant related investigations. Here, we applied a femtosecond-terahertz (fs-THz) pulse to mouse skin to evaluate non-thermal effects of THz radiation. Analysis of the genome-wide expression profile in fs-THz-irradiated skin indicated that wound responses were predominantly mediated by transforming growth factor-beta (TGF-β) signaling pathways. We validated NFκB1- and Smad3/4-mediated transcriptional activation in fs-THz-irradiated skin by chromatin immunoprecipitation assay. Repeated fs-THz radiation delayed the closure of mouse skin punch wounds due to up-regulation of TGF-β. These findings suggest that fs-THz radiation initiate a wound-like signal in skin with increased expression of TGF-β and activation of its downstream target genes, which perturbs the wound healing process in vivo.

  17. Nonlinear THz spectroscopy on n-type GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Gaal, Peter

    2008-06-23

    In this thesis, the ultrafast dynamics of conduction band electrons in semiconductors are investigated by nonlinear terahertz (THz) spectroscopy. In particular, n-doped gallium arsenide samples with doping concentrations in the range of 10{sup 16} cm{sup -3} to 10{sup 17} cm{sup -3} are studied. A novel source for the generation of intense THz radiation is developed which yields single-cycle THz transients with field amplitudes of more then 400 kV/cm. The THz source uses ultrashort optical laser pulses provided by a Ti:sapphire oscillator. In addition, a two-color THz-pump mid-infrared-probe setup is implemented, which allows for two-dimensional time-resolved experiments in the far-infrared wavelength range. Field ionization of neutral shallow donors in gallium arsenide with intense, ultrashort THz pulses and subsequent coherent radiative recombination of electrons to impurity ground states is observed at room temperature. The superradiant decay of the nonlinear polarization results in the emission of a coherent signal with picosecond lifetimes. Such nonlinear signals, which exhibit a lifetime ten times longer than in the linear regime are observed for the first time. At low temperatures and THz field strengths below 5 kV/cm, Rabi flopping on shallow donor transitions is demonstrated. For the first time, the polar electron-LO phonon interaction is directly measured in the quantum kinetic transport regime. Quasi-instantaneous acceleration of conduction band electrons in the polar gallium arsenide lattice by the electric field of intense THz pulses and subsequent probing of the mid-infrared transmission reveals a modulation of the transmission along the THz-mid-infrared delay coordinate with the frequency of the LO phonon. These modulations directly display the relative phase between the electron motion and its surrounding virtual phonon cloud. Quantum kinetic model calculations fully account for the observed phenomena. (orig.)

  18. THz-driven zero-slippage IFEL scheme for phase space manipulation

    Science.gov (United States)

    Curry, E.; Fabbri, S.; Musumeci, P.; Gover, A.

    2016-11-01

    We describe an inverse free electron laser (IFEL) interaction driven by a near single-cycle THz pulse that is group velocity-matched to an electron bunch inside a waveguide, allowing for a sustained interaction in a magnetic undulator. We discuss the application of this guided-THz IFEL technique for compression of a relativistic electron bunch and synchronization with the external laser pulse used to generate the THz pulse via optical rectification, as well as a laser-driven THz streaking diagnostic with the potential for femtosecond scale temporal resolution. Initial measurements of the THz waveform via an electro-optic sampling based technique confirm the predicted reduction of the group velocity, using a curved parallel plate waveguide, as a function of the varying aperture size of the guide. We also present the design of a proof-of-principle experiment based on the bunch parameters available at the UCLA PEGASUS laboratory. With a 10 {MV} {{{m}}}-1 THz peak field, our simulation model predicts compression of a 6 {MeV} 100 {fs} electron beam by nearly an order of magnitude and a significant reduction of its initial timing jitter. Work supported by DOE grant DE-SC0009914 and NSF grant PHY-1415583.

  19. Industrial applications of THz systems

    Science.gov (United States)

    Wietzke, S.; Jansen, C.; Jördens, C.; Krumbholz, N.; Vieweg, N.; Scheller, M.; Shakfa, M. K.; Romeike, D.; Hochrein, T.; Mikulics, M.; Koch, M.

    2009-07-01

    Terahertz time-domain spectroscopy (THz TDS) holds high potential as a non-destructive, non-contact testing tool. We have identified a plethora of emerging industrial applications such as quality control of industrial processes and products in the plastics industry. Polymers are transparent to THz waves while additives show a significantly higher permittivity. This dielectric contrast allows for detecting the additive concentration and the degree of dispersion. We present a first inline configuration of a THz TDS spectrometer for monitoring polymeric compounding processes. To evaluate plastic components, non-destructive testing is strongly recommended. For instance, THz imaging is capable of inspecting plastic weld joints or revealing the orientation of fiber reinforcements. Water strongly absorbs THz radiation. However, this sensitivity to water can be employed in order to investigate the moisture absorption in plastics and the water content in plants. Furthermore, applications in food technology are discussed. Moreover, security scanning applications are addressed in terms of identifying liquid explosives. We present the vision and first components of a handheld security scanner. In addition, a new approach for parameter extraction of THz TDS data is presented. All in all, we give an overview how industry can benefit from THz TDS completing the tool box of non-destructive evaluation.

  20. Bidirectional subwavelength slit splitter for THz surface plasmons

    National Research Council Canada - National Science Library

    Qiaoqiang Gan; Zhan Fu; Yujie J. Ding; Filbert J. Bartoli

    2007-01-01

    We have conducted a feasibility study of a frequency splitter operating at THz frequencies, based on a bidirectional subwavelength slit simulated using two-dimensional finite difference time domain (FDTD) techniques...

  1. Multifrequency high precise subTHz-THz-IR spectroscopy for exhaled breath research

    Science.gov (United States)

    Vaks, Vladimir L.; Domracheva, Elena G.; Pripolzin, Sergey I.; Chernyaeva, Mariya B.

    2016-09-01

    Nowadays the development of analytical spectroscopy with high performance, sensitivity and spectral resolution for exhaled breath research is attended. The method of two-frequency high precise THz spectroscopy and the method of high precise subTHz-THz-IR spectroscopy are presented. Development of a subTHz-THz-IR gas analyzer increases the number of gases that can be identified and the reliability of the detection by confirming the signature in both THz and MIR ranges. The testing measurements have testified this new direction of analytical spectroscopy to open widespread trends of its using for various problems of medicine and biology. First of all, there are laboratory investigations of the processes in exhaled breath and studying of their dynamics. Besides, the methods presented can be applied for detecting intermediate and short time living products of reactions in exhaled breath. The spectrometers have been employed for investigations of acetone, methanol and ethanol in the breath samples of healthy volunteers and diabetes patients. The results have demonstrated an increased concentration of acetone in breath of diabetes patients. The dynamic of changing the acetone concentration before and after taking the medicines is discovered. The potential markers of pre-cancer states and oncological diseases of gastrointestinal tract organs have been detected. The changes in the NO concentration in exhaled breath of cancer patients during radiotherapy as well as increase of the NH3 concentration at gastrointestinal diseases have been revealed. The preliminary investigations of biomarkers in three frequency ranges have demonstrated the advantages of the multifrequency high precise spectroscopy for noninvasive medical diagnostics.

  2. Silicon and nitride FETs for THz sensing

    Science.gov (United States)

    Shur, M.

    2011-06-01

    Traditional THz electronics is using nonlinear properties of Schottky diodes for THz detectors and mixers and Gunn diodes driving frequency multiplier Schottky diode chains. Recently, ultra-short channel silicon CMOS and nitridebased transistors have demonstrated THz performance. New approaches use excitations of electron density in FET channels - called plasma waves - to generate and detect THz radiation, and extremely high sheet electron density in short channel AlN/GaN based HEMTs makes them especially suitable for applications in THz plasmonic devices.

  3. Development of extreme ultraviolet and soft x-ray multilayer optics for scientific studies with femtosecond/attosecond sources

    Energy Technology Data Exchange (ETDEWEB)

    Aquila, Andrew Lee [Univ. of California, Berkeley, CA (United States)

    2009-05-21

    The development of multilayer optics for extreme ultraviolet (EUV) radiation has led to advancements in many areas of science and technology, including materials studies, EUV lithography, water window microscopy, plasma imaging, and orbiting solar physics imaging. Recent developments in femtosecond and attosecond EUV pulse generation from sources such as high harmonic generation lasers, combined with the elemental and chemical specificity provided by EUV radiation, are opening new opportunities to study fundamental dynamic processes in materials. Critical to these efforts is the design and fabrication of multilayer optics to transport, focus, shape and image these ultra-fast pulses This thesis describes the design, fabrication, characterization, and application of multilayer optics for EUV femtosecond and attosecond scientific studies. Multilayer mirrors for bandwidth control, pulse shaping and compression, tri-material multilayers, and multilayers for polarization control are described. Characterization of multilayer optics, including measurement of material optical constants, reflectivity of multilayer mirrors, and metrology of reflected phases of the multilayer, which is critical to maintaining pulse size and shape, were performed. Two applications of these multilayer mirrors are detailed in the thesis. In the first application, broad bandwidth multilayers were used to characterize and measure sub-100 attosecond pulses from a high harmonic generation source and was performed in collaboration with the Max-Planck institute for Quantum Optics and Ludwig- Maximilians University in Garching, Germany, with Professors Krausz and Kleineberg. In the second application, multilayer mirrors with polarization control are useful to study femtosecond spin dynamics in an ongoing collaboration with the T-REX group of Professor Parmigiani at Elettra in Trieste, Italy. As new ultrafast x-ray sources become available, for example free electron lasers, the multilayer designs

  4. THz-Driven Ultrafast Spin-Lattice Scattering in Amorphous Metallic Ferromagnets

    Science.gov (United States)

    Bonetti, S.; Hoffmann, M. C.; Sher, M.-J.; Chen, Z.; Yang, S.-H.; Samant, M. G.; Parkin, S. S. P.; Dürr, H. A.

    2016-08-01

    We use single-cycle THz fields and the femtosecond magneto-optical Kerr effect to, respectively, excite and probe the magnetization dynamics in two thin-film ferromagnets with different lattice structures: crystalline Fe and amorphous CoFeB. We observe Landau-Lifshitz-torque magnetization dynamics of comparable magnitude in both systems, but only the amorphous sample shows ultrafast demagnetization caused by the spin-lattice depolarization of the THz-induced ultrafast spin current. Quantitative modeling shows that such spin-lattice scattering events occur on similar time scales than the conventional spin conserving electronic scattering (˜30 fs ). This is significantly faster than optical laser-induced demagnetization. THz conductivity measurements point towards the influence of lattice disorder in amorphous CoFeB as the driving force for enhanced spin-lattice scattering.

  5. Broadband THz pulse emission and transmission properties of nanostructured Pt thin films

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Mingzhe [Department of Physics and Electronics, Liupanshui Normal University, Liupanshui, Guizhou 553004 (China); College of Electronics and Information, Guizhou University, Huaxi 550025, Guiyang, Guizhou (China); Mu, Kaijun; Zhang, Cunlin [Department of Physics, Capital Normal University, Yuquan Road 100082, Beijing (China); Gu, Haoshuang, E-mail: guhs@hubu.edu.cn [Department of Electronic Sci& Tech, Hubei University, Xueyuan Road 430062, Wuhan, Hubei (China); Ding, Zhao [College of Electronics and Information, Guizhou University, Huaxi 550025, Guiyang, Guizhou (China)

    2015-10-01

    The THz transmission and emitting properties of a composite metallic nanostructure, composed of Ag nanowires electrodeposited in an anodic aluminum oxide (AAO) template and a Pt thin film, were investigated by using a femtosecond pulse laser irradiation. The microstructure of the above sub-wavelength nanostructure was investigated by XRD, SEM, AFM and TEM. The results indicated that the thickness of the Pt thin film was about 200 nm and the Ag nanowire array had a sparse and random distribution inside the AAO template, with a length distribution in the range of 10–25 μm. The THz radiation properties of above sub-wavelength nanostructure indicated that the generated THz fluence from the Pt film was a magnitude of μW scale with a broadband frequency range and its subsequent transmission could be significantly improved by the better impedance matching property of the Ag nanowire embedded AAO film compared with that of the empty AAO film.

  6. Multi-THz spectroscopy of mobile charge carriers in P3HT:PCBM on a sub-100 fs time scale

    DEFF Research Database (Denmark)

    Cooke, David G.; Krebs, Frederik C; Jepsen, Peter Uhd

    2013-01-01

    The dynamics of mobile charge carrier generation in polymer bulk heterojunction films is of vital importance to the development of more efficient organic photovoltaics. As with conventional semiconductors, the optical signatures of mobile carriers lie in the far-infrared (1-30 THz) although...... spectroscopy of a polymer bulk heterojunction film P3HT:PCBM using a single-cycle, phase-locked and coherently detected multi-THz transient as a probe pulse following femtosecond excitation at 400 nm. By observing changes to the reflected THz transients from the film surface following photoexcitation, we can...

  7. A tunable, linac based, intense, broad-band THz source forpump-probe experiments

    Energy Technology Data Exchange (ETDEWEB)

    Schmerge, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Adolphsen, C. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Corbett, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Dolgashev, V. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Durr, H. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Fazio, M. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Fisher, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Frisch, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Gaffney, K. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Guehr, M. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Hastings, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Hettel, B. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Hoffmann, M. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Hogan, M. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Holtkamp, N. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Huang, X. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Huang, Z. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Kirchmann, P. [SLAC National Accelerator Lab., Menlo Park, CA (United States); LaRue, J. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Limborg, C. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Lindenberg, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Loos, H. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Maxwell, T. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Nilsson, A. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Raubenheimer, T. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Reis, D. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Ross, M. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Shen, Z. -X. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Stupakov, G. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Tantawi, S. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Tian, K. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Wu, Z. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Xiang, D. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Yakimenko, V. [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-02-02

    We propose an intense THz source with tunable frequency and bandwidth that can directly interact with the degrees of freedom that determine the properties of materials and thus provides a new tool for controlling and directing these ultrafast processes as well as aiding synthesis of new materials with new functional properties. This THz source will broadly impact our understanding of dynamical processes in matter at the atomic-scale and in real time. Established optical pumping schemes using femtosecond visible frequency laser pulses for excitation are extended into the THz frequency regime thereby enabling resonant excitation of bonds in correlated solid state materials (phonon pumping), to drive low energy electronic excitations, to trigger surface chemistry reactions, and to all-optically bias a material with ultrashort electric fields or magnetic fields. A linac-based THz source can supply stand-alone experiments with peak intensities two orders of magnitude stronger than existing laser-based sources, but when coupled with atomic-scale sensitive femtosecond x-ray probes it opens a new frontier in ultrafast science with broad applications to correlated materials, interfacial and liquid phase chemistry, and materials in extreme conditions.

  8. Multiple THz pulse generation with variable energy ratio and delay

    Science.gov (United States)

    Ungureanu, R. G.; Grigore, O. V.; Dinca, M. P.; Cojocaru, G. V.; Ursescu, D.; Dascalu, T.

    2015-04-01

    Two methods for multiple high energetic THz pulse generation by two-color filamentation in air with controllable energy ratio and delay ranging from one to hundreds of ps were investigated. In the first method the laser pulse is split into two inside the optical stretcher of a CPA laser system, the resulting consecutive filaments occur in the same region and allows the study of the influence of the first plasma filament on the THz emission of the delayed filament. Based on a polarization sensitive thin film beam splitter placed in front of a 45° mirror, the second method produces multiple parallel consecutive filaments. Above a certain total pump level the THz energy delivered by multiple pulses exceeds the value given by a single filament for the same pump energy, thereby overcoming the THz emission saturation of the single filament.

  9. THz imaging Si MOSFET system design at 215 GHz

    Science.gov (United States)

    Sacco, Andrew P.; Newman, J. Daniel; Lee, Paul P. K.; Fourspring, Kenneth D.; Osborn, John H.; Fiete, Robert D.; Bocko, Mark F.; Ignjatovic, Zeljko; Pipher, Judith L.; McMurtry, Craig W.; Zhang, Xi-Cheng; Dayalu, Jagannath; Fertig, Gregory J.; Zhang, Chao; Ninkov, Zoran

    2014-05-01

    Exelis Geospatial Systems and its CEIS partners at the University of Rochester and Rochester Institute of Technology are developing an active THz imaging focal plane for use in standoff detection, molecular spectroscopy and penetration imaging. This activity is focused on the detection of radiation centered on the atmospheric window at 215.5 GHz. The pixel consists of a direct coupled bowtie antenna utilizing a 0.35 μm CMOS technology MOSFET, where the plasmonic effect is the principle method of detection. With an active THz illumination source such as a Gunn diode, a design of catadioptric optical system is presented to achieve a resolution of 3.0 mm at a standoff distance of 1.0 m. The primary value of the initial system development is to predict the optical performance of a THz focal plane for active imaging and to study the interaction of THz radiation with various materials.

  10. Calculations for Tera-Hertz (THZ) Radiation Sources

    Energy Technology Data Exchange (ETDEWEB)

    Hussein, Yasser A.; Spencer, James E.; /SLAC

    2005-06-07

    We explore possibilities for THz sources from 0.3-30 THz. While still inaccessible, this broad gap is even wider for advanced acceleration schemes extending from X or, at most, W band RF at the low end up to CO{sub 2} lasers. While the physical implementations of these two approaches are quite different, both are proving difficult to develop so that lower frequency, superconducting RF is currently preferred. Similarly, the validity of modeling techniques varies greatly over this range of frequencies but generally mandates coupling Maxwell's equations to the appropriate device transport physics for which there are many options. Here we study radiation from undulatory-shaped transmission lines using finite-difference, time-domain (FDTD) simulations. Also, we present Monte-Carlo techniques for pulse generation. Examples of THz sources demonstrating coherence are shown with the goal of optimizing on-chip THz radiators for applications that may lead to accelerators.

  11. Femtosecond photoelectron spectroscopy: a new tool for the study of anion dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Greenblatt, Benjamin J. [Univ. of California, Berkeley, CA (United States)

    1999-02-01

    A new experimental technique for the time-resolved study of anion reactions is presented. Using femtosecond laser pulses, which provide extremely fast (~100 fs) time resolution, in conjunction with photoelectron spectroscopy, which reveals differences between anion and neutral potential energy surfaces, a complex anion reaction can be followed from its inception through the formation of asymptotic products. Experimental data can be modeled quantitatively using established theoretical approaches, allowing for the refinement of potential energy surfaces as well as dynamical models. After a brief overview, a detailed account of the construction of the experimental apparatus is presented. Documentation of the data acquisition program is contained in the Appendix. The first experimental demonstration of the technique is then presented for I2- photodissociation, modeled using a simulation program which is also detailed in the Appendix. The investigation of I2- photodissociation in several size-selected I2-(Ar)n (n = 6-20) and I2-(CO2)n (n = 4-16) clusters forms the heart of the dissertation. In a series of chapters, the numerous effects of solvation on this fundamental bond-breaking reaction are explored, the most notable of which is the recombination of I2- on the ground $\\tilde{X}$(2Σu+) state in sufficiently large clusters. Recombination and trapping of I2- on the excited $\\tilde{A}$(2π3/2,g) state is also observed in both types of clusters. The studies have revealed electronic state transitions, the first step in recombination, on a ~500 fs to ~10 ps timescale. Accompanying the changes in electronic state is solvent reorganization, which occurs on a similar timescale. Over longer periods (~1 ps to >200 ps), energy is transferred from vibrationally

  12. Femtosecond photoelectron spectroscopy: a new tool for the study of anion dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Greenblatt, B.J.

    1999-02-01

    A new experimental technique for the time-resolved study of anion reactions is presented. Using femtosecond laser pulses, which provide extremely fast ({approx} 100 fs) time resolution, in conjunction with photoelectron spectroscopy, which reveals differences between anion and neutral potential energy surfaces, a complex anion reaction can be followed from its inception through the formation of asymptotic products. Experimental data can be modeled quantitatively using established theoretical approaches, allowing for the refinement of potential energy surfaces as well as dynamical models. After a brief overview, a detailed account of the construction of the experimental apparatus is presented. Documentation of the data acquisition program is contained in the Appendix. The first experimental demonstration of the technique is then presented for I{sub 2}{sup -} photodissociation, modeled using a simulation program which is also detailed in the Appendix. The investigation of I{sub 2}{sup -} photodissociation in several size-selected I{sub 2}{sup -}(Ar){sub n} (n = 6-20) and I{sub 2}{sup -}(CO{sub 2}){sub n} (n = 4-16) clusters forms the heart of the dissertation. In a series of chapters, the numerous effects of solvation on this fundamental bond-breaking reaction are explored, the most notable of which is the recombination of I{sub 2}{sup -} on the ground {tilde X}({sup 2}{Sigma}{sub u}{sup +}) state in sufficiently large clusters. Recombination and trapping of I{sub 2}{sup -} on the excited {tilde A}({sup 2}{Pi}{sub 3/2,g}) state is also observed in both types of clusters. The studies have revealed electronic state transitions, the first step in recombination, on a {approx}500 fs to {approx}10 ps timescale. Accompanying the changes in electronic state is solvent reorganization, which occurs on a similar timescale. Over longer periods ({approx}1 ps to >200 ps), energy is transferred from vibrationally excite d I{sub 2}{sup -} to modes of the solvent, which in turn leads

  13. Femtosecond study of light-induced fluorescence increase of the dark chromoprotein asFP595

    Energy Technology Data Exchange (ETDEWEB)

    Schuettrigkeit, Tanja A. [Department Chemie, Technische Universitaet Muenchen, 85747 Garching (Germany); Feilitzsch, Till von [Department Chemie, Technische Universitaet Muenchen, 85747 Garching (Germany); Kompa, Christian K. [Department Chemie, Technische Universitaet Muenchen, 85747 Garching (Germany); Lukyanov, Konstantin A. [Shemiakin and Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Moscow (Russian Federation); Savitsky, Alexander P. [A.N. Bach Institute of Biochemistry, Russian Academy of Sciences, Moscow (Russian Federation); Voityuk, Alexander A. [Institucio Catalana de Recerca i Estudis Avancats (ICREA), Institute of Computational Chemistry, Universitat de Girona (Spain); Michel-Beyerle, Maria E. [Department Chemie, Technische Universitaet Muenchen, 85747 Garching (Germany)], E-mail: michel-beyerle@ch.tum.de

    2006-04-21

    Femtosecond time-resolved spectroscopy is applied to study the mechanism of the light-induced increase of fluorescence quantum yield of the initially non-fluorescent (dark) chromoprotein asFP595. Spectroscopic and kinetic characteristics of this unique fluorescence 'kindling' phenomenon are: (i) the small Stokes shift of the dark chromophore consistent with either the zwitterion or the anion; (ii) the singlet excited state of the dark chromophore decaying predominantly with a time constant of {approx}320 fs corresponding to a fluorescence quantum yield {phi} {sub Fl} {<=} 10{sup -4}. Since ground state recovery occurs on the same time scale, this radiationless channel is assigned to internal conversion; (iii) the formation of the fluorescent species depending on the sequential absorption of two photons with a delay significantly exceeding the excitation pulse duration of 150 fs; (iv) the fluorescent species showing a red-shift of {approx}20 nm in absorption and emission, and an excited state lifetime of 2.2 ns. The ultrafast internal conversion of the excited dark state is attributed to the proximity of the S{sub 0} and S{sub 1} potential energy surfaces favored by the non-planarity of the chromophore as revealed in recent X-ray structures. Competing with internal conversion two different transformations of the chromophore structure are suggested which may be identified in a future X-ray structural analysis of the the photoconverted fluorescent state. The predominant kindling mechanism may be either (i) trans-cis isomerization or (ii) proton transfer between an excited zwitterion and the protein cleft. For mechanism (ii) the large dipole moment change of about 11 D upon S{sub 0}-S{sub 1} excitation of the chromophore would be crucial in order to initiate protein relaxation and deprotonation of a zwitterion. Both mechanisms are assumed to lead to a metastable planar structure responsible for the long-lived fluorescence of the chromophore &apos

  14. THz reflection spectroscopy of C-4 explosive and its detection through interferometric imaging

    Science.gov (United States)

    Sengupta, Amartya; Bandyopadhyay, Aparajita; Barat, Robert B.; Gary, Dale E.; Federici, John F.

    2006-02-01

    In recent times, Terahertz (1 THz = 10 12 cycles/sec and 300 μm in wavelength) spectroscopy has become a promising technique for spectroscopic identification of different materials having contemporary interest. In this study we report a direct measurement of reflection spectra of the explosive C-4, which shows significant absorption around 0.8 THz, using THz time domain spectroscopic techniques. A contrast in reflection of around 8% has also been observed between the neighboring frequencies of 0.7 THz and 0.9 THz. The spectral data have been used to create realistic synthetic images for use in simulations of interferometric detection in a stand-off THz imaging system. The results obtained are analyzed using Artificial Neural Networks for positive identification of the agents with an interferometric array of few linear detectors in near field mode.

  15. A comparative study of silver nanoparticles synthesized by arc discharge and femtosecond laser ablation in aqueous solution

    Science.gov (United States)

    Zhang, Hongqiang; Zou, Guisheng; Liu, Lei; Li, Yong; Tong, Hao; Sun, Zhenguo; Zhou, Y. Norman

    2016-10-01

    Silver nanoparticles have been synthesized by arc discharge and femtosecond laser ablation in polyvinylpyrrolidone (PVP) aqueous solution. Both methods are the simple, cost-effective and environment-friendly way to obtain the purity silver nanoparticles. In this study, the structure, composition, morphology, size and distribution, stability, production rate and sintering properties of silver nanoparticles synthesized by both methods were compared. The spherical or pseudo-spherical silver nanoparticles were synthesized by both methods, and the diameters were below 50 nm. The arc discharge-synthesized particle distribution varied with the breakdown voltage, and laser-synthesized particle size mainly depended on the laser energy. PVP solution could cap and stabilize the silver nanoparticles by Ag-O bond, while arc discharge and laser ablation resulted in some level of PVP degradation during processing. Sliver nanoparticle colloids synthesized by both methods had the high negative values of zeta potential and exhibited the good stability. The maximum production rates of the silver nanoparticles synthesized by arc discharge and femtosecond laser ablation were 6.0 and 3.0 mg/min, respectively. In addition, the sintering properties of silver nanoparticles synthesized by both methods were also discussed.

  16. Coherence and Relaxation in Potassium-Doped Helium Droplets Studied by Femtosecond Pump-Probe Spectroscopy

    Science.gov (United States)

    Stienkemeier, F.; Meier, F.; Hägele, A.; Lutz, H. O.; Schreiber, E.; Schulz, C. P.; Hertel, I. V.

    1999-09-01

    Superfluid helium droplets are doped with potassium atoms to form complexes in which the metal atom is weakly bound to the cluster surface. The dynamics of these systems upon electronic excitation of the metal atom is probed by means of femtosecond pump-probe spectroscopy. Alignment of the excited potassium p orbital parallel to the cluster surface leads to quantum interferences, the decay of which gives information on the ultrafast perturbation of the induced atomic coherence by the superfluid environment; exciting the p state aligned perpendicularly, the strong repulsive interaction with the helium surface comes into play and the response of the helium environment is followed in time.

  17. Rapid internal conversion in a symmetric molecule LD 700 studied by means of femtosecond fluorescence depletion

    Institute of Scientific and Technical Information of China (English)

    Guo Xun-Min; Wan Yan; Xia An-Dong; Wang Su-Fan; Liu Jian-Yong; Han Ke-Li

    2009-01-01

    The rapid internal conversion dynamics at room temperature is determined by using the femtosecond time-resolved fluorescence depletion measurements of a complex solvatcd molecule of LD 700 (rhodamine 700) combined with steady-state absorption and fluorescence spectroscopy, as well as quantum chemical calculation. The molecule is excited by a 50 fs laser pulse at 400 nm which directly populated the highly excited singlet state, the rapid internal conversions (ICs) are observed, which leads to the directional changes of the emission transition moment following photoexcitation to the highly excited singlet state S5 of LD 700.

  18. THz and Ft-Ir Study of 18-O Isotopologues of Sulfur Dioxide: 32S16O18O and 32S18O_2

    Science.gov (United States)

    Margulès, L.; Motiyenko, R. A.; Demaison, J.; Perrin, Agnes; Kwabia Tchana, F.; Manceron, Laurent

    2016-06-01

    Sulfur dioxide is a molecule that have a great interest in different domains: for atmospheric and planetology chemistry, it is also ubiquitous and abundant in interstellar medium. If the 16O species were extensively studied, this is not the case of the 18O isotopologues. The aim of this study is first to complete the rotational spectra of the ground state with these new measurements up to 1.5 THz, previous measurements are up to 1050 GHz for the 32S16O18O species, and 145 GHz concerning the 32S18O_2 species. The second part is making a global fit of the rotational and vibrational transitions for the excited vibrational states. For the v_2 band, we will complete the recent I.R. analysis. About the triad (v_1, 2v_2, v_3): 32S18O_2 species was studied, but not the 32S16O18O one. and 145 GHz concerning the 32S18O_2 species. The second part is making a global fit of the rotational and vibrational transitions for the excited vibrational states. For the v_2 band, we will complete the recent I.R. analysis. About the triad (v_1, 2v_2, v_3): 32S18O_2 species was studied, but not the 32S16O18O one. The FT-IR spectra were recorded on the AILES Beamline at Synchrotron SOLEIL using the Synchrotron light source, coupled to the Bruker IFS125HR Fourier transform spectrometer. The THz spectra were obtained from 150 to 1500 GHz using the Lille's solid state spectrometer. The analysis is in progress, the latest results will be presented. Support from the French Laboratoire d'Excellence CaPPA (Chemical and Physical Properties of the Atmosphere) through contract ANR-10-LABX-0005 of the Programme d'Investissements d'Avenir is acknowledged Belov, S. P.; et al., 1998, J. Mol. Spectrosc. 191, 17 Lindermayer, J.; et al., 1985, J. Mol. Spectrosc. 110, 357 Gueye, F.; et al. Mol. Phys. in press Ulenikov, O. N.; et al., 2015, JQSRT 166, 13 Brubach, J.; et al., 2010, AIP Conf. Proc. 1214, 81 Zakharenko, O.; et al., 2015, J. Mol. Spectrosc. 317, 41

  19. Thermal imaging of Bi2212 THz oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Akiyama, H.; Pyon, S. [Department of Applied Physics, The University of Tokyo, Tokyo 113-8656 (Japan); Tamegai, T., E-mail: tamegai@ap.t.u-tokyo.ac.jp [Department of Applied Physics, The University of Tokyo, Tokyo 113-8656 (Japan); Tsujimoto, M.; Kakeya, I. [Department of Electric Science & Engineering, Kyoto University, Kyoto 615-8510 (Japan)

    2015-11-15

    Highlights: • Temperature distributions of Bi2212 mesas at low temperatures are measured. • Fluorescent thermal imaging (FTI) method is applied in the thermal imaging. • Obtained thermal images reveal non-uniformity of the temperature distribution. - Abstract: Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+δ} (Bi2212) mesas are promising candidates for THz oscillators, which can fill the frequency range around “THz gap”. However, it is known that Bi2212 mesas show self-heating effects (hot spots) when the current is passed along the c-axis due to the low thermal conductivity in this direction. Although several previous studies reported the relation of the hot spot and THz emission, consistent answer has not been obtained yet. In order to address this issue, imaging of temperature distributions on Bi2212 mesas is expected to be very effective. Here, we set up fluorescent thermal imaging (FTI) method for visualizing the surface temperature distribution on the Bi2212 mesa. We have succeeded in observing hot spots in the Bi2212 mesa with high spatial resolution.

  20. Transmission Properties of THz Radiation Pulses through Very Deep Zero-Order Metallic Gratings

    Institute of Scientific and Technical Information of China (English)

    XING Qi-Rong; LI Shu-Xin; ZHANG Wei-Li; LANG Li-Ying; MAO Fang-Lin; XU Shi-Xiang; CHAI Lu; WANG Qing-Yue

    2005-01-01

    @@ Very deep zero-order metallic grating structures are processed to study the transmission properties of THz radiation pulses. The experiments have been performed with two samples. The delay of the THz pulses and the corresponding resonantly enhanced transmission spectra through the samples are observed. To explain the extraordinary transmission we have treated the samples as Fabry-Perot resonators through resonant excitation of the coupled surface plasmon polaritons filled in the cavities between the metal slats. The experimental results are in reasonable agreement with the numerical simulation. Our results show that THz-time-domain spectroscopy may be an effective technique for studying the optical properties of various THz microstructured devices.

  1. Monolithic, Widely Tunable, THz Local Oscillator Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal describes development of a new type of quantum-cascade laser for use as a local oscillator at frequencies above 2 THz. The THz source described is a...

  2. Mechanism and experimental study on three-dimensional facula shaping in femtosecond laser micromachining

    Science.gov (United States)

    Pan, Xuetao; Tu, Dawei; Cai, Jianwen

    2015-10-01

    Because of the laser beam waist and diffraction effect of the lens, the focal spot light field in femtosecond laser microprocessing has an ellipsoidal spatial distribution. This leads to the gap between two processing layers increasing along the axial direction, and the distribution density of processing points decreasing along the horizontal direction. This directly reduces the resolution of the microprocessing, and badly affects the machining accuracy and surface quality. We established a mathematical model for three-dimensional (3-D) laser beam shaping based on the Fresnel diffraction theory and designed a kind of four-ring complex amplitude transmittance phase plate by using a global optimization algorithm and genetic algorithm to simultaneously realize transverse and axial 3-D shaping. We numerically showed that the transverse and axial gains of the focal facula after 3-D shaping are 0.77 and 0.68, respectively, where the corresponding peak energy ratio is 0.36, the transverse and axial sidelobe energies are 0.28 and 0.62, respectively, and the defocusing amount is -0.08. We also constructed a confocal/two-photon microscope system to experimentally achieve a better shaping effect in the case of femtosecond laser fabrication at a point on the thin film of a photochromic material.

  3. Molecular and structural preservation of dehydrated bio-tissue for THz spectroscopy

    Science.gov (United States)

    Png, Gretel M.; Choi, Jin Wook; Guest, Ian; Ng, Brian W.-H.; Mickan, Samuel P.; Abbott, Derek; Zhang, Xi-Cheng

    2007-12-01

    Terahertz transmission through freshly excised biological tissue is limited by the tissue's high water content. Tissue fixation methods that remove water, such as fixation in Formalin, destroy the structural information of proteins hence are not suitable for THz applications. Dehydration is one possible method for revealing the tissue's underlying molecular structure and components. In this study, we measured the THz responses over time of dehydrating fresh, necrotic and lyophilized rat tissue. Our results show that as expected, THz absorption increases dramatically with drying and tissue freshness can be maintained through lyophilization. Dehydrated biological tissue with retained molecular structure can be useful for future laser-based THz wave molecular analysis.

  4. An Industrial THz Killer Application?

    CERN Document Server

    van Mechelen, Dook

    2015-01-01

    Terahertz technology is mature enough for large-volume sensing applications. However, Dook van Mechelen says there are a few hurdles preventing its industrial debut. THz spectroscopy has a number of advantages that point to abundant industrial applications, in areas such quality control, security and biomedical imaging. Yet despite those advantages, the search for a THz "killer application"--a novel, innovative use with a business case strong enough to bring the technology into the industrial mainstream--has remained fruitless, and even the hope of finding such an application has begun to falter. Why has a killer app for THz radiation been so elusive? And how can the road to industrial application of this versatile technology be cleared?

  5. Ultrafast THz Saturable Absorption in Semiconductors

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Hoffmann, Matthias C.

    2011-01-01

    We demonstrate THz saturable absorption in n-doped semiconductors GaAs, GaP, and Ge in a nonlinear THz time-domain spectroscopy experiment. Saturable absorption is caused by sample conductivity modulation due to electron heating and satellite valley scattering in the field of a strong THz pulse....

  6. Top-hat shaped corneal trephination for penetrating keratoplasty using the femtosecond laser: a histomorphological study.

    Science.gov (United States)

    Kook, Daniel; Derhartunian, Victor; Bug, Reinhold; Kohnen, Thomas

    2009-08-01

    To evaluate a novel technique for penetrating keratoplasty (PK) with the use of a new software algorithm for the femtosecond laser, designed to create penetrating cuts in a top hat configuration. Consecutive histomorphological case series. Twelve eyes of 12 patients underwent penetrating keratoplasty by means of a 60-kHz femtosecond laser (IntraLase, Irvine, California) with a software specifically developed for corneal surgery. Of the 12 patients, the reason for keratoplasty was keratoconus in 4 patients, bullous keratopathy in 6 patients, keratotorus in 1 patient, and status post chemical burn in 1 patient. A new software was used to create penetrating cuts in a top-hat-shaped configuration. In all cases, cutting parameters were identical in all donor and corresponding host corneas: 7.0 mm diameter of the anterior side cut, 8.5-8.7 mm diameter of the posterior side cut, and a depth of 300 microm for the lamellar cut. In all cases, a complete penetrating cut with the laser in the host cornea was not intended intraoperatively. Complete penetration was performed subsequently and manually with a diamond knife because of logistic conditions. Trephined corneoscleral rings and button corneas were analyzed macroscopically and histologically to determine cut quality. All procedures were performed without any complications. With application of appropriate combinations of pulse energy and spacing, trephination took less than 200 seconds. Macroscopic examination and histology of donor and recipient specimens showed a straight, smooth cut with perpendicular edges in all donor buttons. No corneal edema and no visible damage to the keratocyte nuclei were found. At the region of manual dissection, a small stromal tissue-tag was present in parts of the circumference in all donor buttons. No evidence of any cut complication was noted. Top-hat-shaped penetrating keratoplasty using the IntraLase femtosecond laser enables a quick and sufficient trephination of both human donor and

  7. Theoretical study on the p olarizability prop erties of liquid crystal in the THz range%太赫兹波段液晶分子极化率的理论研究∗

    Institute of Scientific and Technical Information of China (English)

    陈泽章

    2016-01-01

    properties would make a vast opportunity for expanding the LC material application scope. Hence, the main purpose of the present work is to provide a theoretical method of calculating and analyzing the THz polarizability properties of LC single compounds for LC-THz device applications. In this work, the frequency dependent molecule polarizability values of liquid crystal PCH5, 5CB and 5OCB in THz range are calculated by the density functional theory method. The geometries of the studied LCs are optimized at B3 LYP levels with the standard 6-311G(d) basis set. From the optimized geometries the molecule THz polarizabilities of LCs are calculated by the M06-2x functional with 6-311++G(2d, p) basis set, and they are found to be in good agreement with experimental data. By plotting the polarizability density analysis (PDA), the spatial contributions of electrons to the longitudinal polarizability are presented. The influences of alkyl chain and core structure on the microscopic polarizability of the LC molecule are investigated and explained by using the finite field approach and PDA. The results show that the unsaturated group, such as benzene ring or cyanobenzyl, makes great contribution to the polarizability of LC. In the design process, the new type of LC molecule must be extended the length ofπelectron conjugated system, to reduce the energy gap between HOMO and LUMO, and hence improving LC molecule polarizabilty. We hope that the present work could give a useful guide in screening or designing LC molecules for THz applications, and offer an effective way to understand fundamental optoelectronic characteristic of LC materials in the THz frequency range.

  8. Comparative study of ornamental granite cleaning using femtosecond and nanosecond pulsed lasers

    Energy Technology Data Exchange (ETDEWEB)

    Rivas, T., E-mail: trivas@uvigo.es [Dpto. Ingeniería de los Recursos Naturales y Medioambiente. E.T.S. Ingeniería de Minas, Universidad de Vigo, 36200 Vigo Spain (Spain); Lopez, A.J.; Ramil, A. [Centro de Investigaciones Tecnológicas. Campus de Esteiro. Universidad de A Coruña 15403 Ferrol Spain (Spain); Pozo, S. [Dpto. Ingeniería de los Recursos Naturales y Medioambiente. E.T.S. Ingeniería de Minas, Universidad de Vigo, 36200 Vigo Spain (Spain); Fiorucci, M.P. [Centro de Investigaciones Tecnológicas. Campus de Esteiro. Universidad de A Coruña 15403 Ferrol Spain (Spain); Silanes, M.E. López de [Dpto. Ingeniería de los Recursos Naturales y Medioambiente. E.I. Forestales. Universidad de Vigo, Campus Pontevedra. 36005 Pontevedra Spain (Spain); García, A.; Aldana, J. R. Vazquez de; Romero, C.; Moreno, P. [Grupo de Investigación en Microprocesado de Materiales con Laser. Facultad de Ciencias, Universidad de Salamanca, 37008 Salamanca Spain (Spain)

    2013-08-01

    Granite has been widely used as a structural and ornamental element in public works and buildings. In damp climates it is almost permanently humid and its exterior surfaces are consequently biologically colonized and blackened We describe a comparative analysis of the performance of two different laser sources in removing biological crusts from granite surfaces: nanosecond Nd:YVO{sub 4} laser (355 nm) and femtosecond Ti:Sapphire laser at its fundamental wavelength (790 nm) and second harmonic (395 nm). The granite surface was analyzed using scanning electron microscopy, attenuated total reflection – Fourier transform infrared spectroscopy and profilometry, in order to assess the degree of cleaning and to characterize possible morphological and chemical changes caused by the laser sources.

  9. Femtosecond study of the interplay between excitons, trions, and carriers in (Cd,Mn)Te quantum wells.

    Science.gov (United States)

    Płochocka, P; Kossacki, P; Maślana, W; Cibert, J; Tatarenko, S; Radzewicz, C; Gaj, J A

    2004-04-30

    We study the absorption by neutral excitons and positively charged excitons (trions) following a femtosecond, circularly polarized, resonant pump pulse. Three populations are involved: free holes, excitons, and trions, all exhibiting transient spin polarization. In particular, a polarization of the gas of free holes is created by the formation of trions. The evolution of these populations is described, including spin flip and trion formation. We evaluate the contributions of phase space filling and spin-dependent screening. We propose a new explanation of the oscillator strength stealing phenomena observed in doped quantum wells, based on the screening of neutral excitons by charge carriers. We have also found that binding holes into charged excitons excludes them from the interaction with the rest of the system, so that oscillator strength stealing is partially blocked.

  10. Numerical Study of Injection Mechanisms for Generation of Mono-Energetic Femtosecond Electron Bunch from the Plasma Cathode

    CERN Document Server

    Ohkubo, Takeru; Zhidkov, Alexei

    2005-01-01

    Acceleration gradients of up to the order of 100GV/m and mono-energetic electron bunch up to 200MeV have recently been observed in several plasma cathode experiments. However, mechanisms of self-injection in plasma are not sufficiently clarified, presently. In this study, we carried out 2D PIC simulation to reveal the mechanisms of mono-energetic femtosecond electron bunch generation. We found two remarkable conditions for the generation: electron density gradient at vacuum-plasma interface and channel formation in plasma. Steep electron density gradient (~ plasma wave length) causes rapid injection and produces an electron bunch with rather high charge and less than 100fs duration. The channel formation guides an injected laser pulse and decreases the threshold of laser self-focusing, which leads to high electric field necessary for wave-breaking injection.

  11. 2.9 THz束缚态向连续态跃迁量子级联激光器研制%Study of 2.9 THz quantum cascade laser based on bound-to-continuum transition

    Institute of Scientific and Technical Information of China (English)

    万文坚; 尹嵘; 谭智勇; 王丰; 韩英军; 曹俊诚

    2013-01-01

    The material of GaAs/AlGaAs bound-to-continuum terahertz quantum-cascade laser (THz QCL) was grown by gas source molec-ular beam epitaxy. A THz QCL device was fabricated with semi-insulating surface-plasmon waveguide. Its spectrum and light intensity-current-voltage characteristics were studied. The device emits about 2.95 THz, and yields a maximum temperature of 67 K in pulse mode. In continuous-wave mode, it displays a threshold current density of 230 A/cm2 at 9 K with maximum emitted power of 1.2 mW and lases up to 30 K.%采用气源分子束外延技术生长了GaAs/AlGaAs束缚态向连续态跃迁的太赫兹量子级联激光器材料,基于半绝缘等离子体波导工艺制作了太赫兹量子级联激光器.测量了激光器的发射光谱和功率-电流-电压关系曲线,研究了器件的激光特性.器件激射频率约2.95 THz,脉冲模式下,最高工作温度为67 K.连续波模式下,阈值电流密度最低为230 A/cm2,最大光输出功率1.2 mW,最高工作温度为30 K.

  12. THz Pump and X-Ray Probe Development at LCLS

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, Alan S; /SLAC, LCLS; Durr, Hermann; /SIMES, Stanford /SLAC, PULSE; Lindenberg, Aaron; Stanford U., Materials Sci.Dept.; /SIMES, Stanford /SLAC, PULSE; Reis, David; /SIMES, Stanford /SLAC, PULSE /Stanford U., Dept. Appl. Phys.; Frisch, Josef; Loos, Henrik; Petree, Mark; /SLAC, LCLS; Daranciang, Dan; /Stanford U., Chem. Dept.; Fuchs, Matthias; /SLAC, PULSE; Ghimire, Shambhu; /SLAC, PULSE; Goodfellow, John; /Stanford U., Materials Sci. Dept.

    2011-11-08

    We report on measurements of broadband, intense, coherent transition radiation at terahertz frequencies, generated as the highly compressed electron bunches in Linear Coherent Light Source (LCLS) pass through a thin metal foil. The foil is inserted at 45{sup o} to the electron beam, 31 m downstream of the undulator. The THz emission passes downward through a diamond window to an optical table below the beamline. A fully compressed 350-pC bunch produces up to 0.5 mJ in a nearly half-cycle pulse of 50 fs FWHM with a spectrum peaking at 10 THz. We estimate a peak field at the focus of over 2.5 GV/m. A 20-fs Ti:sapphire laser oscillator has recently been installed for electro-optic measurements. We are developing plans to add an x-ray probe to this THz pump, by diffracting FEL x rays onto the table with a thin silicon crystal. The x rays would arrive with an adjustable time delay after the THz. This will provide a rapid start to user studies of materials excited by intense single-cycle pulses and will serve as a step toward a THz transport line for LCLS-II.

  13. Material Inspection Using THz and Thermal Wave

    Science.gov (United States)

    Zhang, Cunlin; Mu, Kaijun; Li, Yanhong; Zhang, X.-C.

    2007-03-01

    Terahertz (THz) and thermal wave imaging technologies are complementary inspection modalities for use in non-contact and non-destructive evaluation. Both of them are applied in order to evaluate damages on a variety of composite samples. We will also report the test of a large number of insulation foam panels used in NASA's External Fuel Tank through pulse and CW terahertz systems. The study of defects using the two techniques in selected materials, including metal plates, carbon fibers, glass fibers, carbon silicon composites, etc is also shown.

  14. Femtosecond studies of intervalley scattering in GaAs and Al xGa 1-xAs

    Science.gov (United States)

    Bailey, D. W.; Stanton, C. J.; Hess, K.; LaGasse, M. J.; Schoenlein, R. W.; Fujimoto, J. G.

    1989-12-01

    Results are presented from ensemble Monte Carlo simulations of the relaxation of photoexcited electrons and holes. The results are compared directly with three types of femtosecond optical experiments: transient absorption saturation, pump and continuum probe, and tunable pump-probe experiments. For these experiments we find that intervalley scattering has a dominant effect for the first several hundred femtoseconds, and that electron-electron scattering is only important at later times.

  15. Improvement of passive THz camera images

    Science.gov (United States)

    Kowalski, Marcin; Piszczek, Marek; Palka, Norbert; Szustakowski, Mieczyslaw

    2012-10-01

    Terahertz technology is one of emerging technologies that has a potential to change our life. There are a lot of attractive applications in fields like security, astronomy, biology and medicine. Until recent years, terahertz (THz) waves were an undiscovered, or most importantly, an unexploited area of electromagnetic spectrum. The reasons of this fact were difficulties in generation and detection of THz waves. Recent advances in hardware technology have started to open up the field to new applications such as THz imaging. The THz waves can penetrate through various materials. However, automated processing of THz images can be challenging. The THz frequency band is specially suited for clothes penetration because this radiation does not point any harmful ionizing effects thus it is safe for human beings. Strong technology development in this band have sparked with few interesting devices. Even if the development of THz cameras is an emerging topic, commercially available passive cameras still offer images of poor quality mainly because of its low resolution and low detectors sensitivity. Therefore, THz image processing is very challenging and urgent topic. Digital THz image processing is a really promising and cost-effective way for demanding security and defense applications. In the article we demonstrate the results of image quality enhancement and image fusion of images captured by a commercially available passive THz camera by means of various combined methods. Our research is focused on dangerous objects detection - guns, knives and bombs hidden under some popular types of clothing.

  16. Studies on femtosecond fluorescence dynamics of photosystem II Particle complex at low temperature

    CERN Document Server

    Liu Xiao; He, Jun Fang; Cai, Xia; Peng Jun Fang; Kuang Ting Yun

    2004-01-01

    In order to understanding the diversity of energy transfer in PS II at different temperatures, PS II particle complex purified from spinach was investigated with femtosecond time-resolved fluorescence spectroscopy in the case of excitation 507 nm at 83 K, 160 K, 273 K. The data were analyzed by Gauss analysis and fluorescence decay time- fitting. Some results were achieved. (1) Increase of the temperature results in a broadening of the fluorescence emission spectra due to the temperature-dependent expressions for nonradiative transitions between two electronic states. (2) There are at least several characteristic Chl molecules exist in PS II particle complex, i.e. Chl b/sub 639//sup 640/, Chl b/sub 640//sup 645/, Chl a/sub 660//sup 663/, Chl a/sub 667//sup 668/, Chl a/sub 673//sup 676/, Chl a/sub 680 //sup 681/, Chl a/sub 680/681//sup 682/, Chl a/sub 684,685//sup 668 /689/, Chl a/sub 688//sup 698/, (Chl a/b/sub a//sup e/: a represents the peak of absorption, e represents the peak of emission). (3) Though the ...

  17. Femtosecond spectroscopy study of the exciton relaxation dynamics in silicon quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Kryschi, Carola; Kuntermann, Volker; Cimpean, Carla [Institut fuer Physikalische Chemie I, FAU, Erlangen (Germany); Haarer, Dietrich [BIMF, Universitaet Bayreuth (Germany)

    2008-07-01

    This contribution is targeted to the development of surface-modified silicon quantum dots (Siqdots) with tailored luminescence properties. The surface modification of Siqdots with sizes between 1 and 5 nm has been successfully achieved via two different synthesis routes, first, by controlled oxidation followed from silanization and second, by thermal hydrosilylation with chromophores. The luminescence properties of ethanolic Siqdots dispersions were characterized using stationary and time-resolved luminescence spectroscopy techniques, whereas the ultrashort exciton relaxation dynamics were examined using femtosecond transient absorption spectroscopy. Silanized Siqdots were observed to exhibit two species of photoluminescence (PL): the blue emission at 380 nm is assigned to localized surface states, whereas radiative recombination of quantum confined excitons gives rise to a broad PL band around 800 nm. Whereas the latter is ascribed to Siqdots with sizes larger than 3 nm, for Siqdots smaller than 1.5 nm exciton relaxation dynamics is understood to occur predominantly by trapping due to lower-lying surface states which may radiatively decay. Siqdots terminated with suited chromophores were observed to exhibit only one PL band in the visible that is ascribed to exciton states involving resonant couplings to the conjugated electron system of the chromophores.

  18. Photo-generated THz antennas

    Science.gov (United States)

    Georgiou, G.; Tyagi, H. K.; Mulder, P.; Bauhuis, G. J.; Schermer, J. J.; Rivas, J. Gómez

    2014-01-01

    Electromagnetic resonances in conducting structures give rise to the enhancement of local fields and extinction efficiencies. Conducting structures are conventionally fabricated with a fixed geometry that determines their resonant response. Here, we challenge this conventional approach by demonstrating the photo-generation of THz linear antennas on a flat semiconductor layer by the structured optical illumination through a spatial light modulator. Free charge carriers are photo-excited only on selected areas, which enables the realization of different conducting antennas on the same sample by simply changing the illumination pattern, thus without the need of physically structuring the sample. These results open a wide range of possibilities for the all-optical spatial control of resonances on surfaces and the concomitant control of THz extinction and local fields.

  19. Superradiant THz undulator radiation source based on a superconducting photo-injector

    Science.gov (United States)

    Wen, Xiaodong; Huang, Senlin; Lin, Lin; Wang, Fang; Zhu, Feng; Feng, Liwen; Yang, Limin; Wang, Zhiwen; Fan, Peiliang; Hao, Jiankui; Quan, Shengwen; Liu, Kexin; Chen, Jia-er

    2016-06-01

    Superconducting radio frequency accelerators are used to produce terahertz (THz) radiation pulses with a high repetition rate. In this study, a compact high repetition rate THz radiation source has been developed based on a DC-SRF photo-injector through velocity bunching at Peking University. This compact THz source can theoretically generate approximately 1 W of superradiant THz radiation, with a repetition rate of 16.25 MHz and a frequency that can be tuned from 0.24 THz to 0.42 THz by varying the electron beam energy from 2.4 MeV to 3.1 MeV. Simulation results indicate that the asymmetrical longitudinal distribution of electrons in each bunch caused by velocity bunching increases the THz power by about 2 orders at wavelength within 400-700 μm. Experimental measurements are consistent with the calculation results when propagation loss is considered. This paper presents the system description, simulation, and experiments of the high repetition rate THz source.

  20. Controlling of strong tunable THz emission with optimal incommensurate multi-color laser field

    Science.gov (United States)

    Zhang, Lei; Wang, Guo-Li; Zhao, Song-Feng; Zhou, Xiao-Xin

    2017-02-01

    Based on the photocurrent model, we study terahertz (THz) emission from argon plasmas induced by incommensurate-frequency two- and three-color laser fields. In order to enhance the THz radiation at an arbitrary frequency efficiently, a genetic algorithm is applied to search for the optimum laser parameters. For the longer two-color field, our optimizations show that the THz tunability is mainly determined by two laser frequencies, which approximately meets the law Ω = 2ω1-ω2. However, for the shorter laser pulse, the tunability of the THz wave with lower frequency also depends on the relative phase. To control the tunable THz emission, we systematically investigated how to generate the stronger THz wave with the shorter spectrum width using the optimal synthesized waveform. We found that the THz intensity can be enhanced by about an order with three-color field compared with the two-color cases. We also show that the tunable single ultrashort THz pulses can be obtained by using an optimized 50-fs two-color pulse.

  1. Commercial perspective in THz spectroscopy, sensing and imaging (Conference Presentation)

    Science.gov (United States)

    Bouyé, Clémentine; Taoudi, Sarah; Cochard, Jacques; d'Humières, Benoît

    2017-02-01

    For their ability to be transmitted by materials opaque in the visible and IR ranges (clothes, plastic, …), for being non-ionizing, for providing sub-mm resolution imaging, for the specific signatures of numerous materials, Terahertz waves - ranging from 200 GHz to 10 THz - have been raising the interest of industrials for about fifteen years. This study focuses on the penetration of THz technologies into the industrial applications driving the THz market growth at short and long term: Non Destructive testing (NDT), Defense and Security, Biomedical. For 15 years, Terahertz technologies have been continuously tested on a wide variety of applications. Thanks to these ongoing feasibility studies, manufacturers and end-users gained a deeper knowledge about the abilities and the limitations of the different Terahertz systems (Time-Domain spectroscopy, Frequency-Domain spectroscopy, Time-Domain reflectometry, etc). The demand from end-users is more qualified and is segmented as follows: 1. Detection of objects and defects on large areas 2. Thickness measurement on large areas 3. Chemical and Structural characterization of small objects and defects on small areas (2D) or volumes (3D) Each of these 3 functions leads to a specific family of THz systems with distinct requirements in terms of performance and cost: 1. Detection: cheap and compact imaging systems. 2. Thickness measurement: cost-effective and high speed systems. 3. Characterization: high resolution, high reliability and real-time sensing systems. This article will present the existing and incoming THz systems and components addressing each function. Terahertz technologies are currently finding their place on the market, outside research and scientific applications. The objective of this article is to identify the industrial applications where THz techniques will be adopted and to provide market growth perspectives.

  2. Femtosecond nonlinear ultrasonics in gold probed with ultrashort surface plasmons

    CERN Document Server

    Temnov, Vasily V; Nelson, Keith A; Thomay, Tim; Knittel, Vanessa; Leitenstorfer, Alfred; Makarov, Denys; Albrecht, Manfred; Bratschitsch, Rudolf

    2013-01-01

    Fundamental interactions induced by lattice vibrations on ultrafast time scales become increasingly important for modern nanoscience and technology. Experimental access to the physical properties of acoustic phonons in the THz frequency range and over the entire Brillouin zone is crucial for understanding electric and thermal transport in solids and their compounds. Here, we report on the generation and nonlinear propagation of giant (1 percent) acoustic strain pulses in hybrid gold/cobalt bilayer structures probed with ultrafast surface plasmon interferometry. This new technique allows for unambiguous characterization of arbitrary ultrafast acoustic transients. The giant acoustic pulses experience substantial nonlinear reshaping already after a propagation distance of 100 nm in a crystalline gold layer. Excellent agreement with the Korteveg-de Vries model points to future quantitative nonlinear femtosecond THz-ultrasonics at the nano-scale in metals at room temperature.

  3. A compact THz imaging system

    Science.gov (United States)

    Sešek, Aleksander; Å vigelj, Andrej; Trontelj, Janez

    2015-03-01

    The objective of this paper is the development of a compact low cost imaging THz system, usable for observation of the objects near to the system and also for stand-off detection. The performance of the system remains at the high standard of more expensive and bulkiest system on the market. It is easy to operate as it is not dependent on any fine mechanical adjustments. As it is compact and it consumes low power, also a portable system was developed for stand-off detection of concealed objects under textile or inside packages. These requirements rule out all optical systems like Time Domain Spectroscopy systems which need fine optical component positioning and requires a large amount of time to perform a scan and the image capture pixel-by-pixel. They are also almost not suitable for stand-off detection due to low output power. In the paper the antenna - bolometer sensor microstructure is presented and the THz system described. Analysis and design guidelines for the bolometer itself are discussed. The measurement results for both near and stand-off THz imaging are also presented.

  4. THz Acoustic Spectroscopy by using Double Quantum Wells and Ultrafast Optical Spectroscopy

    Science.gov (United States)

    Wei, Fan Jun; Yeh, Yu-Hsiang; Sheu, Jinn-Kong; Lin, Kung-Hsuan

    2016-06-01

    GaN is a pivotal material for acoustic transducers and acoustic spectroscopy in the THz regime, but its THz phonon properties have not been experimentally and comprehensively studied. In this report, we demonstrate how to use double quantum wells as a THz acoustic transducer for measuring generated acoustic phonons and deriving a broadband acoustic spectrum with continuous frequencies. We experimentally investigated the sub-THz frequency dependence of acoustic attenuation (i.e., phonon mean-free paths) in GaN, in addition to its physical origins such as anharmonic scattering, defect scattering, and boundary scattering. A new upper limit of attenuation caused by anharmonic scattering, which is lower than previously reported values, was obtained. Our results should be noteworthy for THz acoustic spectroscopy and for gaining a fundamental understanding of heat conduction.

  5. Subwavelength InSb-based Slot wavguides for THz transport: concept and practical implementations

    Science.gov (United States)

    Ma, Youqiao; Zhou, Jun; Pištora, Jaromír; Eldlio, Mohamed; Nguyen-Huu, Nghia; Maeda, Hiroshi; Wu, Qiang; Cada, Michael

    2016-12-01

    Seeking better surface plasmon polariton (SPP) waveguides is of critical importance to construct the frequency-agile terahertz (THz) front-end circuits. We propose and investigate here a new class of semiconductor-based slot plasmonic waveguides for subwavelength THz transport. Optimizations of the key geometrical parameters demonstrate its better guiding properties for simultaneous realization of long propagation lengths (up to several millimeters) and ultra-tight mode confinement (~λ2/530) in the THz spectral range. The feasibility of the waveguide for compact THz components is also studied to lay the foundations for its practical implementations. Importantly, the waveguide is compatible with the current complementary metal-oxide-semiconductor (CMOS) fabrication technique. We believe the proposed waveguide configuration could offer a potential for developing a CMOS plasmonic platform and can be designed into various components for future integrated THz circuits (ITCs).

  6. THz Generation by Optical Rectification and Competition with Other Nonlinear Processes

    Institute of Scientific and Technical Information of China (English)

    ZHAO Zhen-Yu; HAMEAU Sophie; TIGNON Jér(o)me

    2008-01-01

    We present a study of the competition between tera-hertz (THz) generation by optical rectification in (110)Zn Te crystals,two-photon absorption,second harmonic generation and flee-carrier absorption.The two-photon nonlinear absorption coefficient,second harmonic generation efficiency and flee-carrier absorption coefficient in the THz range are measured independently.The incident pump field is shown to be depleted by two-photon absorption and the THz radiation is shown to be reduced,upon focusing,by free-carrier absorption.The reduction of the generated THz radiation upon tight focusing is explained,provided that one also takes into account diffraction effects from the sub-wavelength THz source.

  7. Study of deposition parameters for the fabrication of ZnO thin films using femtosecond laser

    Science.gov (United States)

    Hashmi, Jaweria Zartaj; Siraj, Khurram; Latif, Anwar; Murray, Mathew; Jose, Gin

    2016-08-01

    Femtosecond (fs) pulsed laser deposition (fs-PLD) of ZnO thin film on borosilicate glass substrates is reported in this work. The effect of important fs-PLD parameters such as target-substrate distance, laser pulse energy and substrate temperature on structure, morphology, optical transparency and luminescence of as-deposited films is discussed. XRD analysis reveals that all the films grown using the laser energy range 120-230 μJ are polycrystalline when they are deposited at room temperature in a ~10-5 Torr vacuum. Introducing 0.7 mTorr oxygen pressure, the films show preferred c-axis growth and transform into a single-crystal-like film when the substrate temperature is increased to 100 °C. The scanning electron micrographs show the presence of small nano-size grains at 25 °C, which grow in size to the regular hexagonal shape particles at 100 °C. Optical transmission of the ZnO film is found to increase with an increase in crystal quality. Maximum transmittance of 95 % in the wavelength range 400-1400 nm is achieved for films deposited at 100 °C employing a laser pulse energy of 180 μJ. The luminescence spectra show a strong UV emission band peaked at 377 nm close to the ZnO band gap. The shallow donor defects increase at higher pulse energies and higher substrate temperatures, which give rise to violet-blue luminescence. The results indicate that nano-crystalline ZnO thin films with high crystalline quality and optical transparency can be fabricated by using pulses from fs lasers.

  8. Nonadiabatic Induced Dipole Moment by High Intensity Femtosecond Optical Pulses

    OpenAIRE

    Koprinkov, I. G.

    2006-01-01

    Nonadiabtic dressed states and nonadiabatic induced dipole moment in the leading order of nonadiabaticity is proposed. The nonadiabatic induced dipole moment is studied in the femtosecond time domain.

  9. Inherent resistivity of graphene to strong THz fields

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Mics, Zoltán; Jensen, Søren

    2014-01-01

    The nonlinear THz conductivity of graphene is characterized using nonlinear ultrafast THz spectroscopy. Efficient carrier heating by the THz field reduces carrier scattering, yet, counter-intuitively, simultaneously suppresses the high-frequency conductivity of graphene. © 2014 OSA....

  10. Interaction of femtosecond laser pulses with metal photocathode

    Institute of Scientific and Technical Information of China (English)

    Liu Yun-Quan; Zhang Jie; Liang Wen-Xi

    2005-01-01

    The features of interaction of femtosecond laser pulses with photocathode are studied theoretically in this paper.The surface temperature of the metal cathode film while femtosecond laser pulses irradiation is studied with twotemperature model. With a simple photoelectric model we obtain the optimum metal film thickness for the backilluminated photocathode. The generated ultrashort photocurrent pulses are strongly dependent on the temperature of the electron gas and the lattice during the femtosecond laser pulse irradiation on the photocathode.

  11. THz Electro-absorption Effect in Quantum Dots

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Monozon, Boris S.; Livshits, Daniil A.;

    2011-01-01

    Instantaneous electro-absorption effect in quantum dots, induced by electric field of THz pulse with 3 THz bandwidth is demonstrated in THz pump - optical probe experiment. This effect may be promising for Tbit/s wireless transmission systems.......Instantaneous electro-absorption effect in quantum dots, induced by electric field of THz pulse with 3 THz bandwidth is demonstrated in THz pump - optical probe experiment. This effect may be promising for Tbit/s wireless transmission systems....

  12. THz Photonic Band-Gap Prisms Fabricated by Fiber Drawing

    DEFF Research Database (Denmark)

    Busch, Stefan F.; Xu, Lipeng; Stecher, Matthias

    2012-01-01

    We suggest a novel form of polymeric based 3D photonic crystal prisms for THz frequencies which could be fabricated using a standard fiber drawing technique. The structures are modeled and designed using a finite element analyzing technique. Using this simulation software we theoretically study...

  13. Robustness of various metals against high THz field induced damage

    DEFF Research Database (Denmark)

    Zhu, Jianfei; Iwaszczuk, Krzysztof; Tarekegne, Abebe Tilahun;

    2016-01-01

    We investigate various metals for their robustness against damage caused by strong THz field. Even though the damage process is not of a thermal nature we observe a correlation between robustness and the melting temperature. Influence of the substrate material on the damage pattern is also studied....

  14. Femtosecond Optical Trapping of Cells: Efficiency and Viability

    Institute of Scientific and Technical Information of China (English)

    GONG Jixian; LI Fang; XING Qirong

    2009-01-01

    The femtosecond optical trapping capability and the effect of femtosecond laser pulses on cell viability were studied. The maximum lateral velocity at which the particles just failed to be trapped, together with the measured average trapping power, were used to calculate the lateral trapping force(Q-value). The viability of the cells after femtosecond laser trapping was ascertained by vital staining. Measurement of the Q-values shows that femtosecond optical tweezers are just as effective as continuous wave optical tweezers. The experiments demonstrate that there is a critical limit for expo-sure time at each corresponding laser power of femtosecond optical tweezers, and femtosecond laser tweezers are safe for optical trapping at low power with short exposure time.

  15. Mechanical, histological and histomorphometric evaluation of modified by femtosecond laser zirconia implants versus titanium implants. An experimental study in dogs at three months

    Directory of Open Access Journals (Sweden)

    J.L. Calvo-Guirado

    2013-06-01

    Full Text Available Aim The present study was aimed at quantifying implant´s stability and elemental composition by Periotest® and evaluating bone to implant contact (BIC and crestal bone loss of modified by femtosecond laser zirconia and titanium implants.Materials and methods Forty-eight implants were divided into 2 groups: titanium (control and modified by femtosecond laser zirconia (test and then inserted in 6 American Foxhound dogs. Primary stability and secondary stability were measured by Periotest, BIC was evaluated by histomorphometry at 1 and 3 months, elemental composition of the surrounding bone in both groups after 1 and 3 months was assessed.Results Differences between groups regarding primary stability and secondary stability were not significant (p>0.05. The Carbon ratio at zirconia (12.529% was significantly lower (p0.05 regarding BIC for titanium vs modified zirconia were observed. Crestal bone loss at 3 months was significantly (p<0.05 lower (0.07 ±0.34 mm in titanium group than in zirconia (1.25 ± 1.73 mm.Conclusion Surface treatment by using femtosecond laser equalizes osseointegration of zirconia implants.

  16. Ultrafast energy redistribution in C(60) fullerenes: a real time study by two-color femtosecond spectroscopy.

    Science.gov (United States)

    Shchatsinin, Ihar; Laarmann, Tim; Zhavoronkov, Nick; Schulz, Claus Peter; Hertel, Ingolf V

    2008-11-28

    Strong-field excitation and energy redistribution dynamics of C(60) fullerenes are studied by means of time-resolved mass spectrometry in a two-color femtosecond pump-probe setup. Resonant pre-excitation of the electronic system via the first dipole-allowed HOMO-->LUMO+1(t(1g)) (HOMO denotes highest occupied molecular orbital and LUMO denotes lowest unoccupied molecular orbital) transition with ultrashort 25 fs pulses at 399 nm of some 10(12) W cm(-2) results in a highly nonequilibrium distribution of excited electrons and vibrational modes in the neutral species. The subsequent coupling among the electronic and nuclear degrees of freedom is monitored by probing the system with time-delayed 27 fs pulses at 797 nm of some 10(13) W cm(-2). Direct information on the characteristic relaxation time is derived from the analysis of transient singly and multiply charged parent and fragment ion signals as a function of pump-probe delay and laser pulse intensity. The observed relaxation times tau(el) approximately 60-400 fs are attributed to different microcanonical ensembles prepared in the pre-excitation process and correspond to different total energy contents and energy sharing between electronic and vibrational degrees. The characteristic differences and trends allow one to extract a consistent picture for the formation dynamics of ions in different charge states and their fullerenelike fragments and give evidence to collective effects in multiple ionization such as plasmon-enhanced energy deposition.

  17. First steps in the phytochrome phototransformation: a comparative femtosecond study on the forward (Pr --> Pfr) and back reaction (Pfr --> Pr).

    Science.gov (United States)

    Bischoff, M; Hermann, G; Rentsch, S; Strehlow, D

    2001-01-09

    The primary light-induced events in the reversible Pr right harpoon over left harpoon Pfr phototransformation are investigated by femtosecond absorption spectroscopy using a pump-probe technique. After the selective electronic excitation of Pr and Pfr with pulses at 610 and 730 nm, respectively, the transient absorption spectra were measured as a function of the delay time and subjected to a global fit analysis. As a result of this analysis, the decay-associated spectra of the kinetic components involved in the formation of the first photoproducts in the forward and back reaction are obtained. These spectra provide a more detailed understanding of the primary stages in the light-induced transformations. In addition, the influence of the solvent viscosity on the initial reaction steps was studied. In each direction of reaction, a short-lifetime component is found to be strongly viscosity-dependent, indicating that the primary photochemistry encompasses intramolecular motions of the chromophore or its proximal amino acid side chains. H-D exchange has no significant effect on the kinetics of the initial photoprocesses. This suggests that the isomerization reaction in both directions is not accompanied by a rate-limiting proton transfer.

  18. Comparative study of visual acuity and aberrations after intralase femtosecond LASIK: small corneal flap versus big corneal flap

    Institute of Scientific and Technical Information of China (English)

    Ya-Li; Zhang; Lei; Liu; Chang-Xia; Cui; Ming; Hu; Zhao-Na; Li; Li-Jun; Cao; Xiu-Hua; Jing; Guo-Ying; Mu

    2014-01-01

    AIM:To study the effects of different flap sizes on visual acuity, refractive outcomes, and aberrations after femtosecond laser for laser keratomileusis (LASIK). ·METHODS: In each of the forty patients enrolled, 1 eye was randomly assigned to receive treatment with a 8.1mm diameter corneal flap, defined as the small flap, while the other eye was treated with a 8.6mm diameter corneal flap, defined as the big flap. Refractive errors, visual acuity, and higher -order aberrations were compared between the two groups at week 1, month 1 and 3 postoperatively. · RESULTS: The postoperative refractive errors and visual acuity all conformed to the intended goal. Postoperative higher -order aberrations were increased, especially in spherical aberration (Z12) and vertical coma (Z7). There were no statistically significant differences between the two groups in terms of postoperative refractive errors, visual acuity, root mean square of total HOAs (HO -RMS), trefoil 30° (Z6), vertical coma (Z7), horizontal coma (Z8), trefoil 0° (Z9), and spherical aberration (Z12) at any point during the postoperative follow-up. ·CONCLUSION: Both the small and big flaps are safe and effective procedures to correct myopia, provided the exposure stroma meets the excimer laser ablations. The personalized size corneal flap is feasible, as we can design the size of corneal flap based on the principle that the corneal flap diameter should be equal to or greater than the sum of the maximum ablation diameter and apparatus error.

  19. Field emission study from an array of hierarchical micro protrusions on stainless steel surface generated by femtosecond pulsed laser irradiation

    Science.gov (United States)

    Singh, A. K.; Suryawanshi, Sachin R.; More, M. A.; Basu, S.; Sinha, Sucharita

    2017-02-01

    This paper reports our results on femtosecond (fs) pulsed laser induced surface micro/nano structuring of stainless steel 304 (SS 304) samples and their characterization in terms of surface morphology, formed material phases on laser irradiation and field emission studies. Our investigations reveal that nearly uniform and dense array of hierarchical micro-protrusions (density: ∼5.6 × 105 protrusions/cm2) is formed upon laser treatment. Typical tip diameters of the generated protrusions are in the range of 2-5 μm and these protrusions are covered with submicron sized features. Grazing incidence X-ray diffraction (GIXRD) analysis of the laser irradiated sample surface has shown formation mainly of iron oxides and cementite (Fe3C) phases in the treated region. These laser micro-structured samples have shown good field emission properties such as low turn on field (∼4.1 V/μm), high macroscopic field enhancement factor (1830) and stable field emission current under ultra high vacuum conditions.

  20. Photonic-assisted ultrafast THz wireless access

    DEFF Research Database (Denmark)

    Yu, Xianbin; Chen, Ying; Galili, Michael

    THz technology has been considered feasible for ultrafast wireless data communi- cation, to meet the increasing demand on next-generation fast wireless access, e.g., huge data file transferring and fast mobile data stream access. This talk reviews recent progress in high-speed THz wireless...

  1. Terahertz emission from InSb illuminated by femtosecond laser pulses

    Science.gov (United States)

    Arlauskas, A.; Subačius, L.; Krotkus, A.; Malevich, V. L.

    2017-02-01

    Athough terahertz (THz) radiation from semiconductor surfaces illuminated by femtosecond laser pulses was observed a long time ago, the mechanisms responsible for this radiation still remains questionable, especially in narrow band gap semiconductors. Four different crystallographic orientation {(1 0 0), (1 1 0), (1 1 1) and (1 1 2)} InSb samples were analyzed in this investigation. THz amplitude dependences on the excitation wavelength and azimuthal angle are presented in this paper. We have shown that the second order nonlinear effect—optical rectification—is responsible for THz radiation in InSb. The microscopic origin of this effect is related to the orientation of electrons momenta by the optical radiation and anisotropy of the conduction band at high energies. Monte Carlo simulations have shown that electric field screening by intrinsic carriers diminishes the contribution of the third order nonlinear effect in this material.

  2. Femtosecond-laser-driven wire-guided helical undulator for intense terahertz radiation

    Science.gov (United States)

    Tian, Ye; Liu, Jiansheng; Bai, Yafeng; Zhou, Shiyi; Sun, Haiyi; Liu, Weiwei; Zhao, Jiayu; Li, Ruxin; Xu, Zhizhan

    2017-02-01

    The capability of synchrotron radiation to produce ultrabright emission has attracted considerable interest over the last half a century. To date, magnetic undulators with a period of several centimetres are commonly used for wiggling relativistic electrons in a modulated field. Here, we propose a novel compact undulator with a period down to the submillimetre level based on a spontaneous electric field that is driven by a femtosecond laser. Both the guided energetic electrons and the gyrotron-like undulator are spontaneously produced by irradiating a thin metallic wire with an intense laser pulse. An intense radial electric field instantaneously created on the wire can guide the electrons' helical motion along the wire and induce periodic THz emission. We have demonstrated that this scheme can produce intense THz sources with a conversion efficiency of 1% that are frequency-tunable by adjusting the diameter of the wire. Amplified emission of THz radiation by more than tenfold has been observed.

  3. Investigations on time stability of passive THz imaging

    Science.gov (United States)

    Kowalski, Marcin; Palka, Norbert; Zyczkowski, Marek; Szustakowski, Mieczyslaw

    2014-10-01

    Terahertz radiation is within the frequency range from 100 GHz to 10THz. This radiation has specific characteristics in terms of imaging. The radiation is harmless to the human body because the energy transferred by electromagnetic waves in this range of frequencies are very small thus there is no ionization of matter. The development of imaging devices and exploration of new spectral bands is a chance to introduce new equipment for assuring public safety. It has been proved that objects hidden under clothing can be detected and visualized using terahertz (THz) cameras. However, passive THz cameras still offer too low image resolution for objects recognition. In order to determine the properties of terahertz imaging for detection of hidden objects several aspects need to be considered. Taking into account the fact that the image captured by the terahertz camera reflects the spatial distribution of the relative temperature of the observed objects, the effect of the measurement time on the imaging capabilities should be examined. A very important aspect is the influence of the type (material composition) of coating material, as well as the type of an object hidden under clothing (size and material). The purpose of the studies is to investigate the time stability of passive THz imaging on 250 GHz for detection of concealed objects. In the article, we present the measurement setup, the measurement methodology as well as the initial results of measurements with various types of clothing and test objects.

  4. Dynamics of Femtosecond Electron Bunches

    OpenAIRE

    Khachatryan, A. G.; Irman, A.; van Goor, F. A.; Boller, K. -J.

    2007-01-01

    In the laser wakefield accelerator (LWFA) a short intense laser pulse, with a duration of the order of a plasma wave period, excites an unusually strong plasma wake wave (laser wakefield). Recent experiments on laser wakefield acceleration [Nature (London) 431, p.535, p.538, p.541 (2004)] demonstrated generation of ultra-short (with a duration of a few femtoseconds) relativistic electron bunches with relatively low energy spread of the order of a few percent. We have studied the dynamics of s...

  5. Femtosecond Studies Of Excited Carrier Energy Relaxation And Intervalley Scattering In GaAs and AlGaAs

    Science.gov (United States)

    Lin, W. Z.; LaGasse, M. J.; Schoenlein, R. W.; Zysset, B.; Fujimoto, J. G.

    1988-08-01

    We report the investigation of excited carrier scattering, energy relaxation, and intervalley scattering in GaAs and AlGaAs. Pump and continuum probe absorption saturation measurements provide evidence for femtosecond transient nonthermal carrier distributions and permit a measurement of carrier cooling processes. Measurements performed using a tunable femotsecond laser allow an investigation of intervalley scattering.

  6. Coherent femtosecond low-energy single-electron pulses for time-resolved diffraction and imaging: A numerical study

    Energy Technology Data Exchange (ETDEWEB)

    Paarmann, A.; Mueller, M.; Ernstorfer, R. [Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, 14195 Berlin (Germany); Gulde, M.; Schaefer, S.; Schweda, S.; Maiti, M.; Ropers, C. [Courant Research Center Physics and Material Physics Institute, University of Goettingen, Friedrich-Hund-Platz 1, 37077 Goettingen (Germany); Xu, C. [Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, 14195 Berlin (Germany); Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Science, 390, Qinghe Road, Jiading, Shanghai 201800 (China); Hohage, T. [Institute of Numerical and Applied Mathematics, University of Goettingen, Lotzestr. 16-18, 37083 Goettingen (Germany); Schenk, F. [Courant Research Center Physics and Material Physics Institute, University of Goettingen, Friedrich-Hund-Platz 1, 37077 Goettingen (Germany); Institute of Numerical and Applied Mathematics, University of Goettingen, Lotzestr. 16-18, 37083 Goettingen (Germany)

    2012-12-01

    We numerically investigate the properties of coherent femtosecond single electron wave packets photoemitted from nanotips in view of their application in ultrafast electron diffraction and non-destructive imaging with low-energy electrons. For two different geometries, we analyze the temporal and spatial broadening during propagation from the needle emitter to an anode, identifying the experimental parameters and challenges for realizing femtosecond time resolution. The simple tip-anode geometry is most versatile and allows for electron pulses of several ten of femtosecond duration using a very compact experimental design, however, providing very limited control over the electron beam collimation. A more sophisticated geometry comprising a suppressor-extractor electrostatic unit and a lens, similar to typical field emission electron microscope optics, is also investigated, allowing full control over the beam parameters. Using such a design, we find {approx}230 fs pulses feasible in a focused electron beam. The main limitation to achieve sub-hundred femtosecond time resolution is the typical size of such a device, and we suggest the implementation of more compact electron optics for optimal performance.

  7. Femtosecond pump probe spectroscopy for the study of energy transfer of light-harvesting complexes from extractions of spinach leaves

    CSIR Research Space (South Africa)

    Ombinda-Lemboumba, Saturnin

    2009-09-01

    Full Text Available :sapphire femtosecond oscillator (Coherent Mira 900-F), operating at a repetition rate of 76 MHz and pumped by the 5 W output of a continuous diode-pumped Nd:YVO4 laser (Coherent Verdi V5), produced pulses of approximately 130 fs duration, as measured by a home...

  8. Generation of THz-radiation in the Cherenkov decelerating structure with planar geometry at frequency ∼ 0.675 THz

    Science.gov (United States)

    Ashanin, I. A.; Polozov, S. M.

    2016-07-01

    One of the ways to generate THz-radiation is by the relativistic electron bunches travelling through Cherenkov decelerating dielectric filled capillary channel. Sapphire or other dielectric materials can be used for the internal surface coating of the capillary. Relativistic electron bunches of ∼100 µm in diameter and pulse durations of 1 ps or shorter are capable to produce substantial power of THz-radiation. The aperture of Cherenkov decelerating structure should be comparable with the sub-mm wavelength (0.05-3 mm). Such type of decelerating system allows providing of the wide range of operating parameters at the various geometrical sizes. But it is necessary to consider that such capillaries are difficult in production as there is a requirement to drill a small aperture in a long crystal of high hardness but brittle. In this regard it would be desirable to offer transition option from the axial to the planar geometry. Furthermore the ribbon beam has some advantages as focusing at low energies and possessing smaller expansion in the drift space. The authors present design and results of electrodynamics study of the decelerating planar dielectric filling Cherenkov channel at frequency 0.675 THz in this article. It is also delivered characteristic comparison with axial geometry channel. A horn antenna attached to such channel at 0.675 THz resonant frequency is considered.

  9. Non-monotonic dynamics of water in its binary mixture with 1,2-dimethoxy ethane: A combined THz spectroscopic and MD simulation study

    Science.gov (United States)

    Das Mahanta, Debasish; Patra, Animesh; Samanta, Nirnay; Luong, Trung Quan; Mukherjee, Biswaroop; Mitra, Rajib Kumar

    2016-10-01

    A combined experimental (mid- and far-infrared FTIR spectroscopy and THz time domain spectroscopy (TTDS) (0.3-1.6 THz)) and molecular dynamics (MD) simulation technique are used to understand the evolution of the structure and dynamics of water in its binary mixture with 1,2-dimethoxy ethane (DME) over the entire concentration range. The cooperative hydrogen bond dynamics of water obtained from Debye relaxation of TTDS data reveals a non-monotonous behaviour in which the collective dynamics is much faster in the low Xw region (where Xw is the mole fraction of water in the mixture), whereas in Xw ˜ 0.8 region, the dynamics gets slower than that of pure water. The concentration dependence of the reorientation times of water, calculated from the MD simulations, also captures this non-monotonous character. The MD simulation trajectories reveal presence of large amplitude angular jumps, which dominate the orientational relaxation. We rationalize the non-monotonous, concentration dependent orientational dynamics by identifying two different physical mechanisms which operate at high and low water concentration regimes.

  10. Towards Ultrahigh Speed Impulse Radio THz Wireless Communications

    DEFF Research Database (Denmark)

    Yu, Xianbin; Galili, Michael; Morioka, Toshio

    2015-01-01

    THz impulse radio technologies promise a new paradigm of fast wireless access with simplified wireless reception. However, huge loss of propagating broad bandwidth THz impulse radio signals limits THz wireless transmission distance and reduces the achievable link data rates. In this paper, we...... evaluate the realistic throughput and accessible wireless range of a THz impulse radio communication link based on a uni-travelling photodiode (UTC-PD) as THz emitter and a photoconductive antenna (PCA) as THz receiver. The impact of highly frequency-selective THz channel and the noise in the system...

  11. Application of High Intensity THz Pulses for Gas High Harmonic Generation

    CERN Document Server

    Balogh, Emeric; Hebling, János; Dombi, Péter; Farkas, Győző; Varjú, Katalin

    2013-01-01

    The main effects of an intense THz pulse on gas high harmonic generation are studied via trajectory analysis on the single atom level. Spectral and temporal modifications to the generated radiation are highlighted.

  12. Ultra-broadband THz time-domain spectroscopy of common polymers using THz air photonics

    DEFF Research Database (Denmark)

    D’Angelo, Francesco; Mics, Zoltán; Bonn, Mischa

    2014-01-01

    Terahertz-range dielectric properties of the common polymers low-density polyethylene (LDPE), cyclic olefin/ethylene copolymer (TOPAS®), polyamide-6 (PA6), and polytetrafluoroethylene (PTFE or Teflon®) are characterized in the ultra-broadband frequency window 2-15 THz, using a THz time-domain spe......Terahertz-range dielectric properties of the common polymers low-density polyethylene (LDPE), cyclic olefin/ethylene copolymer (TOPAS®), polyamide-6 (PA6), and polytetrafluoroethylene (PTFE or Teflon®) are characterized in the ultra-broadband frequency window 2-15 THz, using a THz time...... and PTFE, and their dielectric functions in the complete frequency window 2-15 THz are theoretically reproduced. Our results demonstrate the potential of ultrabroadband air-photonics-based THz time domain spectroscopy as a valuable analytic tool for materials science....

  13. Subwavelength THz imaging of graphene photoconductivity

    CERN Document Server

    Hornett, Samuel M; Vardaki, Martha Z; Beckerleg, Chris; Hendry, Euan

    2016-01-01

    Using a spatially structured, optical pump pulse with a THz probe pulse, we are able to determine spatial variations of the ultrafast THz photoconductivity with sub-wavelength resolution (75 $\\mu m \\approx \\lambda/5$ at 0.8 THz) in a planar graphene sample. We compare our results to Raman spectroscopy and correlate the existence of the spatial inhomogeneities between the two measurements. We find a strong correlation with inhomogeneity in electron density. This demonstrates the importance of eliminating inhomogeneities in doping density during CVD growth and fabrication for photoconductive devices.

  14. THz spectroscopy of D2H+

    Science.gov (United States)

    Yu, S.; Pearson, J. C.; Amano, T.; Matsushima, F.

    2017-01-01

    We extended the measurements of the rotational transitions of D2H+ up to 3 THz by using the JPL frequency multiplier chains and a TuFIR system at Toyama. D2H+ was generated in an extended negative glow discharge cell cooled to liquid nitrogen temperature. We observed five new THz lines. All the available rotational transition frequencies together with the combination differences derived from the three fundamental bands were subject to least square analysis to determine the molecular constants. New THz measurements are definitely useful for better characterization of spectroscopic properties. The improved molecular constants provide better predictions of other unobserved rotational transitions.

  15. Chemical recognition with broadband THz spectroscopy

    DEFF Research Database (Denmark)

    Fischer, Bernd M.; Helm, Hanspeter; Jepsen, Peter Uhd

    2004-01-01

    contains unique fingerprints of a very large number of crystalline materials, including explosives, illicit drugs as well as most other chemicals in powder form. Since many packaging materials are transparent to THz radiation this fundamental property of crystalline compounds allows remote (contact...... with broadband THz spectroscopy. Amorphous systems of great biotechnical importance include DNA and proteins, both in aqueous solution and as dried matter. We will discuss methods for THz science and technology to attack the very complex problems involved in the extraction of useful new information which may...

  16. DNA detection by THz pumping

    Energy Technology Data Exchange (ETDEWEB)

    Chernev, A. L. [Russian Academy of Sciences, St. Petersburg Academic University—Nanotechnology Research and Education Centre (Russian Federation); Bagraev, N. T.; Klyachkin, L. E. [Russian Academy of Sciences, Ioffe Physicotechnical Institute (Russian Federation); Emelyanov, A. K.; Dubina, M. V. [Russian Academy of Sciences, St. Petersburg Academic University—Nanotechnology Research and Education Centre (Russian Federation)

    2015-07-15

    DNA semiconductor detection and sequencing is considered to be the most promising approach for future discoveries in genome and proteome research which is dramatically dependent on the challenges faced by semiconductor nanotechnologies. DNA pH-sensing with ion-sensitive field effect transistor (ISFET) is well-known to be a successfully applied electronic platform for genetic research. However this method lacks fundamentally in chemical specificity. Here we develop the first ever silicon nanosandwich pump device, which provides both the excitation of DNA fragments’ self-resonant modes and the feedback for current-voltage measurements at room temperature. This device allows direct detection of singlestranded label-free oligonucleotides by measuring their THz frequency response in aqueous solution. These results provide a new insight into the nanobioelectronics for the future real-time technologies of direct gene observations.

  17. Femtosecond pump probe spectroscopy for the study of energy transfer of light-harvesting complexes from extractions of spinach leaves

    Directory of Open Access Journals (Sweden)

    L. van Rensburg

    2010-01-01

    Full Text Available Measurements of ultrafast transient processes, of temporal durations in the picosecond and femtosecond regime, are made possible by femtosecond pump probe transient absorption spectroscopy. Such an ultrafast pump probe transient absorption setup has been implemented at the CSIR National Laser Centre and has been applied to investigate energy transfer processes in different parts of photosynthetic systems. In this paper we report on our first results obtained with Malachite green as a benchmark. Malachite green was chosen because the lifetime of its excited state is well known. We also present experimental results of the ultrafast energy transfer of light-harvesting complexes in samples prepared from spinach leaves. Various pump wavelengths in the range 600–680 nm were used; the probe was a white light continuum spanning 420–700 nm. The experimental setup is described in detail in this paper. Results obtained with these samples are consistent with those expected and achieved by other researchers in this field.

  18. Limitations to THz generation by optical rectification using tilted pulse fronts

    CERN Document Server

    Ravi, Koustuban; Carbajo, Sergio; Wu, Xiaojun; Kartner, Franz

    2014-01-01

    Terahertz (THz) generation by optical rectification (OR) using tilted pulse fronts is studied. We show that the back-action of THz on the optical pulse causes the large experimentally observed cascaded frequency down shift and spectral broadening of the optical pump pulse. In the presence of this large spectral broadening, group velocity dispersion due to angular dispersion enhances phase mismatch and is shown to be the strongest limitation to terahertz generation in lithium niobate. It is seen that the exclusion of THz back-action in modeling OR, leads to a significant overestimation of optical to THz conversion efficiencies. 1-D and 2-D spatial models which for the first time simultaneously include terahertz back-action, angular and material dispersion, absorption, self-phase modulation and stimulated Raman scattering are developed to study the process. The simulation results are supported by experiments.

  19. New THz opportunities based on graphene

    Energy Technology Data Exchange (ETDEWEB)

    Hartnagel, Hans [Technical University Darmstadt, Fachbereich 18, Mikrowellenelektronik, Merckstr.25, 64283 Darmstadt (Germany)

    2015-04-24

    Graphene is a new material of a single or multiple layer carbon structure with impressive properties. A brief introduction is initially presented. Graphene does not have a bandwidth and is a semimetal with charge carriers of zero mass. A bandgap can be formed by confining the graphene width in nanoribbon or nanoconstricition structures. For example, the induced bandgap by a 20 nm wide nanoribbon is about 50 meV. The charge carrier mass then increases, but is still very small. This material can especially be employed for various Terahertz applications. Here several examples are to be described, namely a) a THz transistor, b) the opportunities of ballistic electron resonances for THz signal generation, c) the simultaneous optical transmission and electrical conduction up to THz frequencies and d) Cascaded THz emitters. The optical advantages of multilayer graphene can be compared to ITO (Indium Tin Oxide)

  20. Graphene-Enhanced Metamaterials for THz Applications

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Khromova, Irina; Zhukovsky, Sergei

    2016-01-01

    Terahertz (THz) radiation is gaining momentum in biology, medicine, communication, security, chemistry, and spectroscopy applications. To expand the usability of terahertz radiation the man-made metal-dielectric composite metamaterials are typically considered owing to their ability to effectively...

  1. A Broadband Dipolar Resonance in THz Metamaterials

    CERN Document Server

    Sangala, Bagvanth Reddy; Gopal, Achanta Venu; Prabhu, S S

    2014-01-01

    We demonstrate a THz metamaterial with broadband dipole resonance originating due to the hybridization of LC resonances. The structure optimized by finite element method simulations is fabricated by electron beam lithography and characterized by terahertz time-domain spectroscopy. Numerically, we found that when two LC metamaterial resonators are brought together, an electric dipole resonance arises in addition to the LC resonances. We observed a strong dependence of the width of these resonances on the separation between the resonators. This dependence can be explained based on series and parallel RLC circuit analogies. The broadband dipole resonance appears when both the resonators are fused together. The metamaterial has a stopband with FWHM of 0.47 THz centered at 1.12 THz. The experimentally measured band features are in reasonable agreement with the simulated ones. The experimental power extinction ratio of THz in the stopbands is found to be 15 dB.

  2. Arrayed Continuous-wave THz Photomixers

    CERN Document Server

    Bauerschmidt, S T; Döhler, G H; Lu, H; Gossard, A C; Preu, S

    2013-01-01

    We present both chip-scale and free space coherent arrays of continuous-wave THz photomixers. By altering the relative phases of the exciting laser signals, the relative THz phase between the array elements can be tuned, allowing for beam steering. The constructive interference of the emission of N elements leads to an increase of the focal intensity by a factor of NxN while reducing the beam width by ~1/N, below the diffraction limit of a single source. Such array architectures strongly improve the THz power distribution for stand-off spectroscopy and imaging systems while providing a huge bandwidth at the same time. We demonstrate this by beam profiles generated by a free space 2x2 and a 4x1 array for a transmission distance of 4.2 meters. Spectra between 70 GHz and 1.1 THz have been recorded with these arrays.

  3. THz Medical Imaging: in vivo Hydration Sensing

    Science.gov (United States)

    Taylor, Zachary D.; Singh, Rahul S.; Bennett, David B.; Tewari, Priyamvada; Kealey, Colin P.; Bajwa, Neha; Culjat, Martin O.; Stojadinovic, Alexander; Lee, Hua; Hubschman, Jean-Pierre; Brown, Elliott R.; Grundfest, Warren S.

    2015-01-01

    The application of THz to medical imaging is experiencing a surge in both interest and federal funding. A brief overview of the field is provided along with promising and emerging applications and ongoing research. THz imaging phenomenology is discussed and tradeoffs are identified. A THz medical imaging system, operating at ~525 GHz center frequency with ~125 GHz of response normalized bandwidth is introduced and details regarding principles of operation are provided. Two promising medical applications of THz imaging are presented: skin burns and cornea. For burns, images of second degree, partial thickness burns were obtained in rat models in vivo over an 8 hour period. These images clearly show the formation and progression of edema in and around the burn wound area. For cornea, experimental data measuring the hydration of ex vivo porcine cornea under drying is presented demonstrating utility in ophthalmologic applications. PMID:26085958

  4. Femtosecond study of laser coloring soluble in water: the coumarins; Etude femtoseconde de colorants laser solubles dans l`eau: les coumarines

    Energy Technology Data Exchange (ETDEWEB)

    Cassara, L.

    1996-11-29

    This thesis concerns the study of four hydro soluble coumarins A.T.C., D.M.A.T.C., D.A.T.C. et C.H.O.S., analogues of classical coumarins C120, C311, C1 and C102. These molecules are made hydro soluble because of the substitution in position 4- of the methyl group by a polyether group. The mechanisms of deactivation are studied because of fluorescence methods (resolved in time and transient absorption) which allow to study the reactional dynamics of coumarins after luminous excitement. SEveral time scales, from a few femto seconds to the nanosecond have been approachable and have allowed investigations on different processes: relaxation S{sub n} {yields} S{sub 1}, solvation dynamics, orientational diffusion of the solution and deactivation process S{sub 1} {yields} S{sub 0} of radiative and non radiative relaxation in different solvents. (N.C.)

  5. Composite THz materials using aligned metallic and semiconductor microwires, experiments and interpretation

    OpenAIRE

    Mazhorova, Anna; Gu, Jian Feng; Dupuis, Alexandre; Tsuneyuki, Ozaki; Paccianti, Marco; Morandotti, Roberto; MINAMIDE, Hiroaki; Tang, Ming; Wang, Yuye; Ito, Hiromasa; Skorobogatiy, Maksim

    2010-01-01

    We report fabrication method and THz characterization of composite films containing either aligned metallic (tin alloy) microwires or chalcogenide As2Se3 microwires. The microwire arrays are made by stack-and-draw fiber fabrication technique using multi-step co-drawing of low-melting-temperature metals or semiconductor glasses together with polymers. Fibers are then stacked together and pressed into composite films. Transmission through metamaterial films is studied in the whole THz range (0....

  6. European Research on THz Vacuum Amplifiers

    DEFF Research Database (Denmark)

    Brunetti, F.; Cojocarua, C.-S.; de Rossi, A.

    2010-01-01

    The OPTHER (OPtically Driven TeraHertz AmplifiERs) project represents a considerable advancement in the field of high frequency amplification. The design and realization of a THz amplifier within this project is a consolidation of efforts at the international level from the main players of the Eu...... of the European research, academy and industry in vacuum electronics. This paper describes the status of the project and progress towards the THz amplifier realization....

  7. Porous-core honeycomb bandgap THz fiber

    DEFF Research Database (Denmark)

    Nielsen, Kristian; Rasmussen, Henrik K.; Jepsen, Peter Uhd

    2011-01-01

    In this Letter we propose a novel (to our knowledge) porous-core honeycomb bandgap design. The holes of the porous core are the same size as the holes in the surrounding cladding, thereby giving the proposed fiber important manufacturing benefits. The fiber is shown to have a 0:35-THz......-wide fundamental bandgap centered at 1:05 THz. The calculated minimum loss of the fiber is 0:25 dB=cm....

  8. European Research on THz Vacuum Amplifiers

    DEFF Research Database (Denmark)

    Brunetti, F.; Cojocarua, C.-S.; de Rossi, A.

    2010-01-01

    The OPTHER (OPtically Driven TeraHertz AmplifiERs) project represents a considerable advancement in the field of high frequency amplification. The design and realization of a THz amplifier within this project is a consolidation of efforts at the international level from the main players of the Eu...... of the European research, academy and industry in vacuum electronics. This paper describes the status of the project and progress towards the THz amplifier realization....

  9. Femtosecond Laser Filamentation

    CERN Document Server

    Chin, See Leang

    2010-01-01

    Femtosecond Laser Filamentation gives a comprehensive review of the physics of propagation of intense femtosecond laser pulses in optical media (principally air) and the applications and challenges of this new technique. This book presents the modern understanding of the physics of femtosecond laser pulse propagation, including unusual new effects such as the self-transformation of the pulse into a white light laser pulse, intensity clamping, the physics of multiple filamentation and competition, and how filaments’ ability to melt glass leads to wave guide writing. The potential applications of laser filamentation in atmospheric sensing and the generation of other electromagnetic pulses from the UV to the radio frequency are treated, together with possible future challenges in the excitation of super-excited states of molecules. Exciting new phenomena such as filament induced ultrafast birefringence and the excitation of molecular rotational wave packets and their multiple revivals in air (gases) will also ...

  10. Micromachining using femtosecond lasers

    Science.gov (United States)

    Toenshoff, Hans K.; Ostendorf, Andreas; Nolte, Stefan; Korte, Frank; Bauer, Thorsten

    2000-11-01

    Femtosecond laser systems have been proved to be effective tools for high precision micro-machining. Almost all solid materials can be processed with high precision. The dependence on material properties like thermal conductivity, transparency, heat- or shock sensitivity is strongly reduced and no significant influence on the remaining bulk material is observed after ablation using femtosecond laser pulses. In contrast to conventional laser processing, where the achievable precision is reduced due to a formed liquid phase causing burr formation, the achievable precision using femtosecond pulses is only limited by the diffraction of the used optics. Potential applications of this technique, aincluding the structuring of biodegradable polymers for cardiovascular implants, so-called stents, as well as high precision machining of transparent materials are presented.

  11. Modeling the THz spectrum of the bentazon

    Institute of Scientific and Technical Information of China (English)

    Huali Wang; Qiang Wang

    2011-01-01

    Bentazon, with chemical name 3-isopropyl-lH-2,1,3-benzothiadiazin-4(3H)-one 2,2-dioxide,is a colorless to slightly brown,odorless crystalline solid.Bentazon is one of the synthetic,contact,and post-emergence herbicide used for selective control of broadleaf weeds and sedges in numerous crop fields.%Terahertz (THz) spectra of bentazon are determined within the range of 0.3-2.4 THz at room temperar ture. Density functional methods are used to compute the THz spectra using three different programs: GaussianO3 for isolated-molecule form, DMol3 and CRYSTAL09 for solid-state forms. Among the three, the computed THz spectrum of CRYSTAL09 shows better bond length and angle agreements with X-ray experimental results, and corresponds with observed THz experiment spectral characteristics. The isolated-molecule vibrational mode values are less by half than those derived from solid-state calculations. The last five peak positions of the two solid-state computations coincide with each other. Moreover, all the experimental THz absorption peaks are assigned by utilizing CRYSTAL09.

  12. Novel materials, fabrication techniques and algorithms for microwave and THz components, systems and applications

    Science.gov (United States)

    Liang, Min

    This dissertation presents the investigation of several additive manufactured components in RF and THz frequency, as well as the applications of gradient index lens based direction of arrival (DOA) estimation system and broadband electronically beam scanning system. Also, a polymer matrix composite method to achieve artificially controlled effective dielectric properties for 3D printing material is studied. Moreover, the characterization of carbon based nano-materials at microwave and THz frequency, photoconductive antenna array based Terahertz time-domain spectroscopy (THz-TDS) near field imaging system, and a compressive sensing based microwave imaging system is discussed in this dissertation. First, the design, fabrication and characterization of several 3D printed components in microwave and THz frequency are presented. These components include 3D printed broadband Luneburg lens, 3D printed patch antenna, 3D printed multilayer microstrip line structure with vertical transition, THz all-dielectric EMXT waveguide to planar microstrip transition structure and 3D printed dielectric reflectarrays. Second, the additive manufactured 3D Luneburg Lens is employed for DOA estimation application. Using the special property of a Luneburg lens that every point on the surface of the Lens is the focal point of a plane wave incident from the opposite side, 36 detectors are mounted around the surface of the lens to estimate the direction of arrival (DOA) of a microwave signal. The direction finding results using a correlation algorithm show that the averaged error is smaller than 1º for all 360 degree incident angles. Third, a novel broadband electronic scanning system based on Luneburg lens phased array structure is reported. The radiation elements of the phased array are mounted around the surface of a Luneburg lens. By controlling the phase and amplitude of only a few adjacent elements, electronic beam scanning with various radiation patterns can be easily achieved

  13. Femtosecond spectroscopic study of the solvation of amphiphilic molecules by water

    NARCIS (Netherlands)

    Y.L.A. Rezus; H.J. Bakker

    2008-01-01

    We use polarization-resolved mid-infrared pump-probe spectroscopy to study the aqueous solvation of proline and N-methylacetamide. These molecules serve as models to study the solvation of proteins. We monitor the orientational dynamics of partly deuterated water molecules (HDO) that are present at

  14. Ultrafast THz saturable absorption in doped semiconductors at room temperature

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Hoffmann, M. V.

    2011-01-01

    Ultrafast Phenomena XVII presents the latest advances in ultrafast science, including both ultrafast optical technology and the study of ultrafast phenomena. It covers picosecond, femtosecond and attosecond processes relevant to applications in physics, chemistry, biology, and engineering. Ultraf...... and provides an up-to-date view of this important and rapidly advancing field....

  15. Feasibility study for a recirculating linac-based facility for femtosecond dynamics

    CERN Document Server

    Corlett, J N; Barry, W; Byrd, J M; De Santis, S; Doolittle, L; Fawley, W; Green, M A; Hartman, N; Heimann, P A; Kairan, D; Kujawski, E; Li, D; Lidia, S M; Luft, P; McClure, R; Parmigiani, F; Petroff, Y; Pirkl, Werner; Placidi, Massimo; Ratti, A; Reavill, D; Reichel, I; Rimmer, R A; Robinson, K E; Sannibale, F; Schönlein, R W; Staples, J; Tanabe, J; Truchlikova, D; Wan, W; Wang, S; Wells, R; Wolski, A; Zholents, A

    2002-01-01

    LBNL is pursuing design studies and the scientific program for a facility of the production of x-ray pulses with ultra-short time duration, for application in dynamical studies of processes in physics, biology, and chemistry. The proposed x-ray facility has the short x-ray pulse length (approx 60 fs FWHM) necessary to study very fast dynamics, high flux (up to approximately 10E11 photons/sec/0.1 percentBW) to study weakly scattering systems, and tuneability over 1-12 keV photon energy. The hard x-ray photon production section of the machine accommodates seven 2-m long undulators. Design studies for longer wavelength sources, using high-gain harmonic generation, are in progress. The x-ray pulse repetition rate of 10 kHz is matched to studies of dynamical processes (initiated by ultra-short laser pulses) that typically have a long recovery time or are not generally cyclic or reversible and need time to allow relaxation, replacement, or flow of the sample. The technique for producing ultra-short x-ray pulses use...

  16. Feasibility study for a recirculating linac-based facility for femtosecond dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Corlett, J.N.; Barry, W.; Barletta, W.A.; Byrd, J.M.; DeSantis, S.; Doolittle, L.; Fawley, W.; Green, M.A.; Hartman, N.; Heimann, P.; Kairan, D.; Kujawski, E.; Li, D.; Lidia, S.; Luft, P.; McClure, R.; Parmigiani, F.; Petroff, Y.; Pirkl, W.; Placidi, M.; Reavill, D.; Reichel, I.; Rimmer, R.A.; Ratti, A.; Robinson, K.E.; Sannibale, F.; Schoenlein, R.; Staples, J.; Tanabe, J.; Truchlikova, D.; Wan, W.; Wang, S.; Wells, R.; Wolski, A.; Zholents, A.

    2002-12-21

    LBNL is pursuing design studies and the scientific program for a facility dedicated to the production of x-ray pulses with ultra-short time duration, for application in dynamical studies of processes in physics, biology, and chemistry. The proposed x-ray facility has the short x-ray pulse length ({approx}60 fs FWHM) necessary to study very fast dynamics, high flux (up to approximately 10E11 photons/sec/0.1 percentBW) to study weakly scattering systems, and tuneability over 1-12 keV photon energy. The hard x-ray photon production section of the machine accommodates seven 2-m long undulators. Design studies for longer wavelength sources, using high-gain harmonic generation, are in progress. The x-ray pulse repetition rate of 10 kHz is matched to studies of dynamical processes (initiated by ultra-short laser pulses) that typically have a long recovery time or are not generally cyclic or reversible and need time to allow relaxation, replacement, or flow of the sample. The technique for producing ultra-short x-ray pulses uses relatively long electron bunches to minimize high-peak-current collective effects, and the ultimate x-ray duration is achieved by a combination of bunch manipulation and optical compression. Synchronization of x-ray pulses to sample excitation signals is expected to be of order 50 - 100 fs. Techniques for making use of the recirculating geometry to provide beam-based signals from early passes through the machine are being studied.

  17. The design of circuit for THz time domain spectroscopy system based on asynchronous optical sampling

    Science.gov (United States)

    Wang, Ruike; Zhang, Mile; Li, Yihan; He, Jingsuo; Zhang, Cunlin; Cui, Hailin

    2016-11-01

    Terahertz time domain spectroscopy system (THz-TDS) is the most commonly means of measuring terahertz time-domain spectroscopy. The time delay between the pump and probe laser is an important technology to realize THz time domain spectrum measurement. The translation platform with two mirrors and the mechanical structure is the popular means to adjust the optical path difference between the pump and probe laser to get the time delay of femtosecond pulse. Because of the limit of the mechanical structure and the phase-locked amplifier, this technique can't scan spectrum fast. In order to obtain high quality signal, a long time will be taken to scan spectrum. So a more rapid and convenient time delay technology is required to Instead of the machine translation platform and accomplish the Rapid spectral measurement. Asynchronous optical sampling technique is a way to get the time delay by producing a very small frequency difference between the repetition frequency of two femtosecond lasers. The scanner time will be reduced, because of there is no waste of time, due to mechanical inertia, not only by using the asynchronous optical sampling method to replace the mechanical structure without the influence of vibration. It will greatly increase the degree of integration by using the fiber femtosecond laser and highly integrated circuit to realize optical asynchronous sampling. To solve the problem above, a terahertz time-domain spectroscopy system based on asynchronous sampling is designed in this thesis. The system is based of two femtosecond laser whose repetition frequency is 100MHz.In order to realize asynchronous sampling, the control circuit of the two lasers is the most important. This thesis focuses on the researching, designing and experiment of this circuit. Firstly, the circuit is designed overall. Then the selection of the key device and the designing of the circuit principle is done by myself. Secondly, the test of the circuit to phase locked the master and

  18. Comparative study of energy of particles ejected from coulomb explosion of rare gas and metallic clusters irradiated by intense femtosecond laser field

    Science.gov (United States)

    Boucerredj, N.; Beggas, K.

    2016-10-01

    We present our study of high intensity femtosecond laser field interaction with large cluster of Kr and Na (contained 2.103 to 2.107 atoms). When laser intensity is above a critical value, it blows off all of electrons from the cluster and forms a non neutral ion cloud. The irradiation of these clusters by the intense laser field leads to highly excitation energy which can be the source of energetic electrons, electronic emission, highly charge, energetic ions and fragmentation process. During the Coulomb explosion of the resulting highly ionized, high temperature nanoplasma, ions acquire again their energy. It is shown that ultra fast ions are produced. The goal of our study is to investigate in detail a comparative study of the expansion and explosion then the ion energy of metallic and rare gas clusters irradiated by an intense femtosecond laser field. We have found that ions have a kinetic energy up to 105 eV and the Coulomb pressure is little than the hydrodynamic pressure. The Coulomb explosion of a cluster may provide a new high energy ion source.

  19. Femtosecond Heterodyne Transient Grating Spectroscopic Studies of Intramolecular Charge Transfer Character of Peridinin and Peridinin Analogs

    Science.gov (United States)

    Bishop, Michael; Khosravi, Soroush; Obaid, Razib; Whitelock, Hope; Carroll, Ann Marie; Lafountain, Amy; Frank, Harry; Beck, Warren; Gibson, George; Berrah, Nora

    2016-05-01

    The peridinin chlorophyll-a protein is a light harvesting complex found in several species of dinoflagellates. Peridinin absorbs strongly in the mid-visible spectral region and, despite the lack of a strong permanent dipole moment in its lowest energy excited state, is able to transfer excitation energy quickly and efficiently to chlorophyll-a. It is believed that the high efficiency arises from the development of intramolecular charge-transfer (ICT) character upon photoexcitation. Recently, heterodyne transient grating spectroscopy has been used to study the ultrafast (<50 fs) dynamics of β carotene and peridinin. The studies show evidence for a structurally displaced intermediate in both cases and strong ICT character in the case of peridinin, but up to now the work has not provided appropriate control experiments. The present experiments examine peridinin and two peridinin analogs, S1-peridinin and S2-peridinin. S1-peridinin is reported to have greatly diminished ICT character, and S2-peridinin is reported to have little-or-no ICT character. Heterodyne transient grating data will be presented and provide a more unambiguous characterization spectral and kinetic properties associated with the peridinin ICT state. Funded by the DoE-BES, Grant No. DE-SC0012376.

  20. The impact of hydration changes in fresh bio-tissue on THz spectroscopic measurements

    Science.gov (United States)

    Png, G. M.; Choi, J. W.; W-H Ng, B.; Mickan, S. P.; Abbott, D.; Zhang, X.-C.

    2008-07-01

    We present a study of how residual hydration in fresh rat tissue samples can vastly alter their extracted terahertz (THz) optical properties and influence their health assessment. Fresh (as opposed to preserved) tissue most closely mimics in vivo conditions, but high water content creates many challenges for tissue handling and THz measurement. Our THz measurements of fresh tissue over time highlight the effect of tissue hydration on tissue texture and dimension, the latter directly influencing the accuracy of calculated optical properties. We then introduce lyophilization (freeze drying) as a viable solution for overcoming hydration and freshness problems. Lyophilization removes large amounts of water while retaining sample freshness. In addition, lyophilized tissue samples are easy to handle and their textures and dimensions do not vary over time, allowing for consistent and stable THz measurements. A comparison of lyophilized and fresh tissue shows for the first time that freeze drying may be one way of overcoming tissue hydration issues while preserving tissue cellular structure. Finally, we compare THz measurements from fresh tissue against necrotic tissue to verify freshness over time. Indeed, THz measurements from fresh and necrotic tissues show marked differences.

  1. Biological effects of in vitro THz radiation exposure in human foetal fibroblasts.

    Science.gov (United States)

    De Amicis, Andrea; Sanctis, Stefania De; Cristofaro, Sara Di; Franchini, Valeria; Lista, Florigio; Regalbuto, Elisa; Giovenale, Emilio; Gallerano, Gian Piero; Nenzi, Paolo; Bei, Roberto; Fantini, Massimo; Benvenuto, Monica; Masuelli, Laura; Coluzzi, Elisa; Cicia, Cristina; Sgura, Antonella

    2015-11-01

    In recent years, terahertz (THz) radiation has been widely used in a variety of applications: medical, security, telecommunications and military areas. However, few data are available on the biological effects of this type of electromagnetic radiation and the reported results, using different genetic or cellular assays, are quite discordant. This multidisciplinary study focuses on potential genotoxic and cytotoxic effects, evaluated by several end-points, associated with THz radiation. For this purpose, in vitro exposure of human foetal fibroblasts to low frequency THz radiation (0.1-0.15THz) was performed using a Compact Free Electron Laser. We did not observe an induction of DNA damage evaluated by Comet assay, phosphorylation of H2AX histone or telomere length modulation. In addiction, no induction of apoptosis or changes in pro-survival signalling proteins were detected. Moreover, our results indicated an increase in the total number of micronuclei and centromere positive micronuclei induction evaluated by CREST analysis, indicating that THz radiation could induce aneugenic rather than clastogenic effects, probably leading to chromosome loss. Furthermore, an increase of actin polymerization observed by ultrastructural analysis after THz irradiation, supports the hypothesis that an abnormal assembly of spindle proteins could lead to the observed chromosomal malsegregation.

  2. Thermostimulated THz Radiation Emission of GaAs at Surface Plasmon-Phonon Polariton Frequencies

    Directory of Open Access Journals (Sweden)

    Edmundas ŠIRMULIS

    2014-06-01

    Full Text Available The THz radiation reflection, absorption and emission spectra of conductive n-GaAs/air surface are considered. The influence of thermostimulated surface plasmon-phonon (SPP polariton oscillations on THz radiation reflection, absorption and emission of high conductivity GaAs polished plates with electron density n = 7∙1017 cm–3 and 4∙1018 cm–3 and thickness of 350 mm is studied experimentally. The frequencies of thermostimulated transverse and longitudinal optical phonons and SPP oscillations, which characterize a heated lattice state, were determined. It is found that the heated highly doped interface layer (GaAs/air emits the THz radiation at selected frequencies of SPP oscillations in the (7 – 8 THz and (10 – 15 THz ranges. It is shown that thermal heating of the GaAs/air interface enhances the absorption of the incident THz radiation. The huge decrease of the incident radiation reflectivity at the SPP frequencies with an increase of GaAs temperature is observed experimentally. DOI: http://dx.doi.org/10.5755/j01.ms.20.2.6318

  3. THz Electro-absorption Effect in Quantum Dots

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Monozon, Boris S.; Livshits, Daniil;

    2011-01-01

    In a THz pump - optical probe experiment we demonstrate an instantaneous electroabsorption effect in InGaAs/GaAs quantum dots, induced by electric field of a THz pulse with 3 THz bandwidth. Temporal features as fast as 460 fs were encoded onto an optical probe signal.......In a THz pump - optical probe experiment we demonstrate an instantaneous electroabsorption effect in InGaAs/GaAs quantum dots, induced by electric field of a THz pulse with 3 THz bandwidth. Temporal features as fast as 460 fs were encoded onto an optical probe signal....

  4. THz Electro-absorption Effect in Quantum Dots

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Monozon, Boris S.; Livshits, Daniil

    2011-01-01

    In a THz pump - optical probe experiment we demonstrate an instantaneous electroabsorption effect in InGaAs/GaAs quantum dots, induced by electric field of a THz pulse with 3 THz bandwidth. Temporal features as fast as 460 fs were encoded onto an optical probe signal.......In a THz pump - optical probe experiment we demonstrate an instantaneous electroabsorption effect in InGaAs/GaAs quantum dots, induced by electric field of a THz pulse with 3 THz bandwidth. Temporal features as fast as 460 fs were encoded onto an optical probe signal....

  5. Experimental Characterization of Extremely Broadband THz Impulse Radio Communication Systems

    DEFF Research Database (Denmark)

    Yu, Xianbin; Vidal, Borja; Galili, Michael

    2015-01-01

    We experimentally characterize a ultrabroadband terahertz (THz) impulse radio system with up to 10 GHz repetition rate. THz generation and radiation are realized in an antenna-integrated uni-traveling-carrier photodiode (UTC-PD), and THz reception is implemented based on photoconductive sampling...... by using a photoconductive antenna (PCA). We analyze the performance in terms of bandwidth and the features of the THz pulses. A 15 dB bandwidth of 1 THz confirms that this THz impulse system has a great potential of supporting ultrafast data rates, eventually for Terabit wireless communication era....

  6. Low Loss and Magnetic Field-tuned Superconducting THz Metamaterial

    CERN Document Server

    Jin, Biaobing; Engelbrecht, Sebastian; Pimenov, Andrei; Wu, Jingbo; Xu, Qinyin; Cao, Chunhai; Chen, Jian; Xu, Weiwei; Kang, Lin; Wu, Peiheng

    2010-01-01

    Superconducting terahertz (THz) metamaterial (MM) made from superconducting Nb film has been investigated using a continuous-wave THz spectroscopy with a superconducting split-coil magnet. The obtained quality factors of the resonant modes at 132 GHz and 450 GHz are about three times as large as those calculated for a metal THz MM operating at 1 K, which indicates that superconducting THz MM is a very nice candidate to achieve low loss performance. In addition, the magnetic field-tuning on superconducting THz MM is also demonstrated, which offer an alternative tuning method apart from the existed electric, optical and thermal tuning on THz MM.

  7. Ultrafast Molecular Photodissociation Dynamics Studied by Femtosecond Photoelectron-Photoion Coincidence Spectroscopy

    Science.gov (United States)

    Thaler, Bernhard; Heim, Pascal; Ernst, Wolfgang E.; Koch, Markus

    2017-06-01

    To completely characterize photodissociation mechanisms with time-resolved spectroscopy, it is essential to obtain unequivocal experimental information about the fragmentation dynamics induced by the laser pulse. We apply time-resolved photoelectron-photoion coincidence (PEPICO) detection in combination with different excitation schemes to obtain a mechanistic picture of the fragmentation process. For gas phase acetone molecules excited to high lying Rydberg states we are able to disentangle different ionization channels and investigate the fragmentation behavior of each channel separately. In particular, the high differentiability of PEPICO allows to distinguish channels where fragmentation proceeds after ionization from channels with fragmentation in the neutral. We show that excited Rydberg state population undergoes internal conversion due to coupling to valence states, which takes place within (150 ± 30) fs. The corresponding non-adiabatic, ultrafast relaxation dynamics to lower lying states causes conversion of electronic to vibrational energy and is found to play a crucial role in the fragmentation process (see figure 1). By studying the influence of photon energy, pulse duration, chirp and intensity of the laser pulses, we are able to determine the energy-threshold that is required for fragmentation, as well as corresponding fragmentation ratios. Surprisingly, for excitation with pulses possessing a strong negative chirp we observe significantly reduced fragmentation, indicating different internal conversion pathways and the associated intramolecular vibrational redistribution.

  8. Studies in Above- and Below-Threshold Harmonics in Argon with an Infrared Femtosecond Laser

    Science.gov (United States)

    Chew, Andrew; Yin, Yanchun; Li, Jie; Ren, Xiaoming; Cunningham, Eric; Wu, Yi; Chang, Zenghu

    2016-05-01

    We investigate and compare the above- and below-threshold harmonics in Argon gas using our recently-developed 1 kHz, two-cycle (11.4 fs), 3mJ, and carrier-envelope-phase(CEP)-stable laser at 1.6 μm. Such ultraviolet pulses can serve as pump or probe for studying dynamics in atoms and molecules. Unlike high harmonics with photon energy well above the ionization potential, the mechanism for generating harmonics near the ionization threshold is still under intense investigation. Previous work by Chini et al. on below-threshold harmonics was done using a 0.8 μm few-cycle Ti:Sapphire spectrally-broadened source with energy up to 300 μJ. It has been predicted by theory that free-free transitions dominate the below threshold harmonic generation as the laser wavelength increase from near infrared to mid-infrared. We are therefore interested in investigating how using a longer wavelength laser might lead to changes to the behavior of below-threshold harmonics when we vary various parameters. We report the π-periodity CEP dependence and ellipticity dependence of the above- and below-threshold harmonics. This material was based on work supported by National Science Foundation (1068604), Army Research Office (W911NF-14-1-0383), Air Force Office of Scientific Research (FA9550-15-1-0037) and the DARPA PULSE program by a Grant from AMRDEC (W31P4Q1310017).

  9. Signaling-State Formation Mechanism of a BLUF Protein PapB from the Purple Bacterium Rhodopseudomonas palustris Studied by Femtosecond Time-Resolved Absorption Spectroscopy.

    Science.gov (United States)

    Fujisawa, Tomotsumi; Takeuchi, Satoshi; Masuda, Shinji; Tahara, Tahei

    2014-12-26

    We studied the signaling-state formation of a BLUF (blue light using FAD) protein, PapB, from the purple bacterium Rhodopseudomonas palustris, using femtosecond time-resolved absorption spectroscopy. Upon photoexcitation of the dark state, FADH(•) (neutral flavin semiquinone FADH radical) was observed as the intermediate before the formation of the signaling state. The kinetic analysis based on singular value decomposition showed that FADH(•) mediates the signaling-state formation, showing that PapB is the second example of FADH(•)-mediated formation of the signaling state after Slr1694 (M. Gauden et al. Proc. Natl. Acad. Sci. U.S.A. 2006, 103, 10895-10900). The mechanism of the signaling-state formation is discussed on the basis of the comparison between femtosecond time-resolved absorption spectra of the dark state and those obtained by exciting the signaling state. FADH(•) was observed also with excitation of the signaling state, and surprisingly, the kinetics of FADH(•) was indistinguishable from the case of exciting the dark state. This result suggests that the hydrogen bond environment in the signaling state is realized before the formation of FADH(•) in the photocycle of PapB.

  10. Femtosecond laser ablation: Experimental study of the repetition rate influence on inductively coupled plasma mass spectrometry performance

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Jhanis J. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Fernandez, Alberto [Centro de Fisicoquimica. Escuela de Quimica, Universidad Central de Venezuela, Caracas 1020-A (Venezuela); Oropeza, Dayana; Mao Xianglei [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Russo, Richard E. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)], E-mail: RERusso@lbl.gov

    2008-02-15

    This paper demonstrates the feasibility of performing bulk chemical analysis based on laser ablation for good lateral resolution with only nominal mass ablated per pulse. The influence of repetition rate (1-1000 Hz) and scan speed (1-200 {mu}m/s) using a low energy (30 {mu}J) and a small spot size ({approx} 10 {mu}m) UV-femtosecond laser beam was evaluated for chemical analysis of silica glass samples, based on laser ablation sampling and inductively coupled plasma mass spectrometry (ICP-MS). Accuracy to approximately 14% and precision of 6% relative standard deviation (RSD) were measured.

  11. Spatiotemporal stability of a femtosecond hard-x-ray undulator source studied by control of coherent optical phonons.

    Science.gov (United States)

    Beaud, P; Johnson, S L; Streun, A; Abela, R; Abramsohn, D; Grolimund, D; Krasniqi, F; Schmidt, T; Schlott, V; Ingold, G

    2007-10-26

    We report on the temporal and spatial stability of the first tunable femtosecond undulator hard-x-ray source for ultrafast diffraction and absorption experiments. The 2.5-1 Angstrom output radiation is driven by an initial 50 fs laser pulse employing the laser-electron slicing technique. By using x-ray diffraction to probe laser-induced coherent optical phonons in bulk bismuth, we estimate an x-ray pulse duration of 140+/-30 fs FWHM with timing drifts below 30 fs rms measured over 5 days. Optical control of coherent lattice motion is demonstrated.

  12. Sub-picosecond energy transfer from a highly intense THz pulse to water: a computational study based on the TIP4P/2005 model

    CERN Document Server

    Mishra, Pankaj Kr; Santra, Robin

    2016-01-01

    The dynamics of ultrafast energy transfer to water clusters and to bulk water by a highly intense, sub-cycle THz pulse of duration $\\approx$~150~fs is investigated in the context of force-field molecular dynamics simulations. We focus our attention on the mechanisms by which rotational and translational degrees of freedom of the water monomers gain energy from these sub-cycle pulses with an electric field amplitude of up to about 0.6~V/{\\AA}. It has been recently shown that pulses with these characteristics can be generated in the laboratory [PRL 112, 213901 (2014)]. Through their permanent dipole moment, water molecules are acted upon by the electric field and forced off their preferred hydrogen-bond network conformation. This immediately sets them in motion with respect to one another as energy quickly transfers to their relative center of mass displacements. We find that, in the bulk, the operation of these mechanisms is strongly dependent on the initial temperature and density of the system. In low densit...

  13. Effects of Pumping Sizes on THz Radiation Based on Ultrashort Light Pulse Optical Rectification for High Spatial Resolution T-Ray Imaging

    Institute of Scientific and Technical Information of China (English)

    XU Shi-Xiang; DAI Xiao-Ming; YANG Xiao-Hua; LI Jing-Zhen

    2008-01-01

    @@ We present our experimental studies on the effects of the pumping sizes on THz radiation based on ultrashort light pulse optical rectification for high spatial resolution T-Ray imaging.Our experiments show that high spatial resolution T-ray imaging requires both thin THz emitter and sample, and rigorous tolerance of the gap between the sample and the emitter, as well as small pumping size which usually much smaller compared with THz wavelength.Such a small pumping size results in dramatic decrease of the THz wave power, which originates from strong diffraction of THz wave, the depolarization of the focused tightly pumping beam, the spatial filtering of the emitter exit-surface, and the strong phase-mismatching between the pumping and the high spatial Fourier components of the THz signal, rather than two-photon absorption.

  14. Compact THz FELs and Their Potential in Biological Applications

    CERN Document Server

    Gallerano, G P; Giovenale, E; Messina, G; Spassovsky, I P

    2005-01-01

    Two THz FEL sources are available at ENEA-Frascati covering the spectral range from 90 GHz to 0.7 THz. The first source, the ENEA Compact FEL, is based on a 5 MeV Microtron providing 4 A of peak current in 13 ps bunches. Peak power in excess of 3kW is obtained at 130 GHz. When the beam is focused, a peak E-field greater than 2 kV/cm can be obtained in the micropulse. The second source, FEL-CATS, is based on a 2.5 MeV RF Linac. After the Linac electrons enter a RF device that correlates their distribution in energy and phase. As a result a strong coherent spontaneous emission occurs in the undulator. Power up to several kW has been measured in the macropulse. The absence of a resonator results in a broad band emission from 0.4 to 0.7 THz. The peculiar temporal structure of the emitted radiation allows the investigation of the effects of high peak power, while maintaining a low average power incident on the sample. A variety of biological systems have been studied with the ENEA Compact FEL in the frame of the E...

  15. Femtosecond Fiber Lasers

    Science.gov (United States)

    Bock, Katherine J.

    This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 microm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third

  16. Femtosecond laser microstructuring of zirconia dental implants

    NARCIS (Netherlands)

    Delgado-Ruiz, R. A.; Calvo-Guirado, J. L.; Moreno, P.; Guardia, J.; Gomez-Moreno, G.; Mate-Sanchez, J. E.; Ramirez-Fernandez, P.; Chiva, F.

    2011-01-01

    This study evaluated the suitability of femtosecond laser for microtexturizing cylindrical zirconia dental implants surface. Sixty-six cylindrical zirconia implants were used and divided into three groups: Control group (with no laser modification), Group A (microgropored texture), and Group 13 (mic

  17. Mode-selective terahertz emission from rippled air irradiated by femtosecond laser pulses

    Science.gov (United States)

    Shin, Junghun; Zhidkov, Alexei; Jin, Zhan; Hosokai, Tomonao; Kodama, Ryosuke

    2014-04-01

    Terahertz (THz) emission from rippled air is studied in multidimensional particle-in-cell simulations that include optical field ionization. The ionization modulation in a plasma channel produced by a laser pulse propagating along a ripple and the pulse self-focusing result in THz mode selection with the generation of intense signals having quasi-monochromatic spectral distributions.

  18. Sub-cycle control of multi-THz high-harmonic generation and all-coherent charge transport in bulk semiconductors

    Science.gov (United States)

    Lange, C.; Schubert, O.; Hohenleutner, M.; Langer, F.; Baierl, S.; Maag, T.; Urbanek, B.; Edwards, E. R. J.; Woltersdorf, G.; Bougeard, D.; Huttner, U.; Golde, D.; Meier, T.; Kira, M.; Koch, S. W.; Huber, R.

    2015-02-01

    Ultrafast transport of electrons in semiconductors lies at the heart of high-speed electronics, electro-optics and fundamental solid-state physics. Intense phase-locked terahertz (THz) pulses at photon energies far below electronic interband resonances may serve as a precisely adjustable alternating bias, strongly exceeding d.c. breakdown voltages. Here, we exploit the near-field enhancement in gold metamaterial structures on undoped bulk GaAs, driven by few-cycle THz transients centered at 1 THz, to bias the semiconductor substrate with field amplitudes exceeding 12 MV/cm. Such fields correspond to a potential drop of the bandgap energy over a distance of only two unit cells. In this extremely off-resonant scenario characterized by a Keldysh parameter of γK ≈ 0.02, massive interband Zener tunneling injects a sizeable carrier density exceeding 1019 cm-3, and strong photoluminescence results. At a center frequency of 30 THz, THz transients with peak fields of 72 MV/cm analogously excite carriers in a bulk, semiconducting GaSe crystal, without metamaterial. Here, in contrast, we are able to drive coherent interband polarization and furthermore dynamical Bloch oscillations of electrons in the conduction band, on femtosecond time scales. The dynamics entail the generation of absolutely phase-stable high-harmonic transients containing spectral components up to the 22nd order of the fundamental frequency, spanning 12.7 optical octaves throughout the entire terahertz-to-visible domain between 0.1 and 675 THz. Our experiments establish a new field of light-wave electronics exploring coherent charge transport at optical clock rates and bring picosecond-scale electric circuitry at the interface of THz optics and electronics into reach.

  19. Tunable femtosecond Cherenkov fiber laser

    DEFF Research Database (Denmark)

    Liu, Xiaomin; Svane, Ask Sebastian; Lægsgaard, Jesper

    2014-01-01

    We demonstrate electrically-tunable femtosecond Cherenkov fiber laser output at the visible range. Using an all-fiber, self-starting femtosecond Yb-doped fiber laser as the pump source and nonlinear photonic crystal fiber link as the wave-conversion medium, ultrafast, milliwatt-level, tunable...... and spectral isolated Cherenkov radiation at visible wavelengths are reported. Such a femtosecond Cherenkov laser source is promising for practical biophotonics applications....

  20. THz and mid-IR spectroscopy of interstellar ice analogs: methyl and carboxylic acid groups.

    Science.gov (United States)

    Ioppolo, S; McGuire, B A; Allodi, M A; Blake, G A

    2014-01-01

    A fundamental problem in astrochemistry concerns the synthesis and survival of complex organic molecules (COMs) throughout the process of star and planet formation. While it is generally accepted that most complex molecules and prebiotic species form in the solid phase on icy grain particles, a complete understanding of the formation pathways is still largely lacking. To take full advantage of the enormous number of available THz observations (e.g., Herschel Space Observatory, SOFIA, and ALMA), laboratory analogs must be studied systematically. Here, we present the THz (0.3-7.5 THz; 10-250 cm(-1)) and mid-IR (400-4000 cm(-1)) spectra of astrophysically-relevant species that share the same functional groups, including formic acid (HCOOH) and acetic acid (CH3COOH), and acetaldehyde (CH3CHO) and acetone ((CH3)2CO), compared to more abundant interstellar molecules such as water (H2O), methanol (CH3OH), and carbon monoxide (CO). A suite of pure and mixed binary ices are discussed. The effects on the spectra due to the composition and the structure of the ice at different temperatures are shown. Our results demonstrate that THz spectra are sensitive to reversible and irreversible transformations within the ice caused by thermal processing, suggesting that THz spectra can be used to study the composition, structure, and thermal history of interstellar ices. Moreover, the THz spectrum of an individual species depends on the functional group(s) within that molecule. Thus, future THz studies of different functional groups will help in characterizing the chemistry and physics of the interstellar medium (ISM).

  1. A European Project on Vacuum Tube Amplifiers for THz Amplification

    DEFF Research Database (Denmark)

    Paoloni, Claudio; Di Carlo, Aldo; Brunetti, Francesca

    2012-01-01

    The OPTHER (Optically Driven THz amplifier) project supported by the European Commission within the Seventh Framework Program (FP7) represents the first joint European attempt to realize vacuum electron devices in THz range. The target of the project was to design and realize the first 1 THz vacu...

  2. Ultrabroadband THz time-domain spectroscopy of biomolecular crystals

    DEFF Research Database (Denmark)

    Kaltenecker, Korbinian J.; Engelbrecht, Sebastian; Iwaszczuk, Krzysztof

    2016-01-01

    Ultrabroadband THz time-domain spectroscopy based on two-color plasma generation and air biased coherent detection is used for the investigation of molecular dynamics of crystalline materials in the frequency range from 0.3 THz to 20 THz. We show that the spectral features in this extended...

  3. THz Electro-absorption Effect in Quantum Dots

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Monozon, Boris S.; Livshits, Daniil A.;

    2011-01-01

    In a THz pump - optical probe experiment we demonstrate an instantaneous electro-absorption effect in InGaAs/GaAs quantum dots, induced by the electric field of a single-cycle THz pulse with 3 THz bandwidth and with free-space peak electric field reaching 220 kV/cm. The transient modulation of QD...

  4. THz spectroscopy of liquids – applications and future challenges

    DEFF Research Database (Denmark)

    Jepsen, Peter Uhd; Cooke, David; Møller, Uffe

    2009-01-01

    THz time-domain spectroscopy (THz-TDS) is by now getting an established technique for the precise determination of the dielectric function of various materials in the terahertz spectral range of the electromagnetic spectrum. Typically, THz-TDS is carried out using planar samples. Examples include...

  5. Helical relativistic electron beam and THz radiation

    CERN Document Server

    Son, S

    2011-01-01

    A THz laser generation utilizing a helical relativistic electron beam propagating through a strong magnetic field is discussed. The initial amplification rate in this scheme is much stronger than that in the conventional free electron laser. A magnetic field of the order of Tesla can yield a radiation in the range of 0.5 to 3 THz, corresponding to the total energy of mJ and the duration of tens of pico-second, or the temporal power of the order of GW.

  6. Single and multiband THz Metamaterial Polarizers

    CERN Document Server

    Sangala, Bagvanth Reddy; Deshmukh, Prathmesh; Surdi, Harshad; Rana, Goutam; Gopal, Achanta Venu; Prabhu, S S

    2015-01-01

    We report single and multiband linear polarizers for terahertz (THz) frequencies using cut-wire metamaterials (MM). The MMs are designed by finite element method, fabricated by electron beam lithography, and characterized by THz time-domain spectroscopy. The MM unit cells consist of single or multiple length cut-wire pads of gold on semi-insulating Gallium Arsenide for single or multiple band polarizers. The dependence of the resonance frequency of the single band polarizer on the length of the cut-wires is explained based a transmission line model.

  7. Plasma shock waves excited by THz radiation

    Science.gov (United States)

    Rudin, S.; Rupper, G.; Shur, M.

    2016-10-01

    The shock plasma waves in Si MOS, InGaAs and GaN HEMTs are launched at a relatively small THz power that is nearly independent of the THz input frequency for short channel (22 nm) devices and increases with frequency for longer (100 nm to 1 mm devices). Increasing the gate-to-channel separation leads to a gradual transition of the nonlinear waves from the shock waves to solitons. The mathematics of this transition is described by the Korteweg-de Vries equation that has the single propagating soliton solution.

  8. Local THz spectroscopy in the condensed phase

    OpenAIRE

    Sajadi Hezaveh, Mohsen

    2012-01-01

    In dieser Arbeit wird die Solvatationsdynamik einer solvatochromen molekularen Sonde diskutiert, und zwar als Methode für den Erhalt von lokalen IR-THz-Spektren von komplexen Systemen. Durch Femtosekundenanregung wird die Ladungsverteilung der Sonde verändert, und als Folge davon wird ein elektrisches Feld induziert. Zu diesem Zeitpunkt wirkt die im Lösungsmittel gelöste Sonde als Lichtquelle mit THz-Frequenzen. Da durch die Anregung das Gleichgewicht des Systems gestört wird, reorganisieren ...

  9. Output Enhancement of a THz Wave Based on a Surface-Emitted THz-Wave Parametric Oscillator

    Institute of Scientific and Technical Information of China (English)

    LI Zhong-Yang; YAO Jian-Quan; XU De-Gang; BING Pi-Bin; ZHONG Kai

    2011-01-01

    High-power nanosecond pulsed THz-wave radiation is achieved via a surface-emitted THz-wave parametric oscillator.One MgO:LiNbO3 crystal with large volume is used as the gain medium.THz-wave radiation from 1.084 THz to 2.654 THz is obtained.The maximum THz-wave average power is 5.8 μ W at 1.93 THz when the pump energy is 84 m J,corresponding to a energy conversion efficiency of 6.9 × 10-6.The polarization characteristics of THz wave are analyzed.During the experiments the radiations of the first-order and the second-order Stokes wave are observed.The THz wave has great scientific research value and wide applications in imaging,material detection,environmental monitoring,communication,astronomy,life sciences,national defense security and so on.[1-4] THz-wave parametric oscillators (TPOs)based on stimulated polariton scattering have many advantages,such as high efficient,coherent,tuning,narrow linewidth,compactness and room-temperature operation.[5-7] In recent years,TPOs have been developed rapidly.Stothard et al.[8] reported on a line-narrowed and widely tunable intracavity TPO,in which the linewidth of the THz wave is about 1 GHz,the tunning range is from 1 to 3 THz,and the peak power of the THz wave is about 3W.Wu et al.[9]reported on a TPO with recycled pump beam,and their experiment results show that the THz-wave out-put power increases almost four times in magnitude.%High-power nanosecond pulsed THz-wave radiation is achieved via a surface-emitted THz-wave parametric oscillator. One MgO:LiNbO3 crystal with large volume is used as the gain medium. THz-wave radiation from 1.084THz to 2.654THz is obtained. The maximum THz-wave average power is 5.8μW at 1.93THz when the pump energy is 84mJ, corresponding to a energy conversion efficiency of 6.9×10-6. The polarization characteristics of THz wave are analyzed. During the experiments the radiations of the first-order and the second-order Stokes wave are observed.

  10. femtosecond laser ablation

    OpenAIRE

    Margetic, Vanja

    2003-01-01

    Femtosecond laser ablation was investigated as a solid sampling method for elemental chemical analysis. In comparison to the sampling with longer laser pulses, two aspects could be improved by using ultrashort pulses: elimination of the elemental fractionation from the ablation crater, which is necessary for an accurate quantitative analysis, and better control of the material removal (especially for metals), which increases the spatial resolution of microanalysis. Basic aspects of ultrashort...

  11. Terahertz generation and detection using femtosecond mode-locked Yb-doped fiber laser

    Science.gov (United States)

    Kong, Moon Sik; Kim, Ji Su; Han, Sang-Pil; Kim, Namje; Moon, Ki Won; Park, Kyung Hyun; Jeon, Min Yong

    2016-02-01

    We successfully demonstrate a THz generation using an ytterbium (Yb)-doped mode-locked femtosecond fiber laser and a home-made low-temperature grown (LTG) InGaAs Photoconductive antenna (PCA) module for THz Time-domain spectroscopy (TDS) systems. The Yb-doped fiber ring laser consists of a pump laser diode (PLD), a wavelength division multiplexer (WDM) coupler, a single-mode fiber (SMF), a 25 cm-long highly Yb-doped fiber, two collimators, two quarter wave plates (QWPs), a half-wave plate (HWP), a 10 nm broadband band pass filter, an isolator, and a polarizing beam splitter (PBS). In order to achieve the passively mode-locked optical short pulse, the nonlinear polarization rotation (NPR) effect is used. The achieved center wavelength and the 3 dB bandwidth of the modelocked fiber laser are 1.03 μm and ~ 15.6 nm, respectively. It has 175 fs duration after pulse compression with 66.2 MHz repetition rate. The average output power of mode-locked laser has more than 275 mW. The LTG-InGaAs PCA modules are used as the emitter and receiver in order to achieve the THz radiation. The PCA modules comprise a hyper-hemispherical Si lens and a log-spiral antenna-integrated LTG-InGaAs PCA chip electronically contacted on a printed circuit board (PCB). An excitation optical average pumping and probing power were ~ 6.3 mW and 5 mW, respectively. The free-space distance between the emitter and the receiver in the THz-TDS system was 70 mm. The spectrum of the THz radiation is achieved higher than 1.5 THz.

  12. Wavelength dependent photoelectron circular dichroism of limonene studied by femtosecond multiphoton laser ionization and electron-ion coincidence imaging

    Science.gov (United States)

    Rafiee Fanood, Mohammad M.; Janssen, Maurice H. M.; Powis, Ivan

    2016-09-01

    Enantiomers of the monoterpene limonene have been investigated by (2 + 1) resonance enhanced multiphoton ionization and photoelectron circular dichroism employing tuneable, circularly polarized femtosecond laser pulses. Electron imaging detection provides 3D momentum measurement while electron-ion coincidence detection can be used to mass-tag individual electrons. Additional filtering, by accepting only parent ion tagged electrons, can be then used to provide discrimination against higher energy dissociative ionization mechanisms where more than three photons are absorbed to better delineate the two photon resonant, one photon ionization pathway. The promotion of different vibrational levels and, tentatively, different electronic ion core configurations in the intermediate Rydberg states can be achieved with different laser excitation wavelengths (420 nm, 412 nm, and 392 nm), in turn producing different state distributions in the resulting cations. Strong chiral asymmetries in the lab frame photoelectron angular distributions are quantified, and a comparison made with a single photon (synchrotron radiation) measurement at an equivalent photon energy.

  13. Microstructuring of electrospun mats employing femtosecond laser

    Directory of Open Access Journals (Sweden)

    Erika Adomavičiūtė

    2015-03-01

    Full Text Available Electrospun mats from nano/micro-fibers with control porosity and pore shape may be ideal candidate for tissue engineering scaffolds. In this study three type of poly(vinyl alcohol (PVA mats of 48-65 µm thickness with different nano/micro-fibers diameters mostly of 100-200 nm were deposited by electrospinning process. Controlled density porosity in the electrospun mats was introduced by Yb:KGW femtosecond laser micromachining system. The influence of electrospun mat micro structure, the distance between the adjacent laser ablation points, the number of femtosecond laser pulses on quality and structure of laser irradiated holes were investigated. It was demonstrated that the quality of irradiated holes depend on structure of electrospun mats (diameter of nano/micro-fibers, thickness of mats and femtosecond laser processing parameters. Varying the distance between points and number of applied femtosecond laser pulses it is possible to fabricate electrospun mats with pores of 22-36 μm diameter.DOI: http://dx.doi.org/10.5755/j01.ms.21.1.10249

  14. Mechanisms of realization of THz-waves of nitrogen oxide occurrence physiological effects

    Directory of Open Access Journals (Sweden)

    Vyacheslav F. Kirichuk

    2013-11-01

    Full Text Available In this review, there is generalized material of many experimental researches in interaction of THz-waves molecular emission and absorption spectrum (MEAS of nitrogen oxide occurrence with bioobjects. Thrombocytes and experimental animals were used as bioobjects. The experiments let indicate changes caused by THz-waves: at the cellular, tissular, system, organismic levels. There are all data of changes in physiological mechanisms of reglations at all levels: autocrine, paracrine, endocrine and nervous. There is a complex overview of experimental material firstly performed in the article. There had been shown that the effect of THz-waves of the given occurrence is realized by the changed activity of nitroxidergic system. It had been proved that THz-waves of nitrogen oxide occurrence can stimulate nitrogen oxide producing in organs and tissues in condition of its low concentration. Possible mechanisms of antiaggregative effect of the given waves had been described. There had been shown the possibility of regulating of vascular tone and system hemodynamics with the help of the studying these frequencies. The represented data of lipid peroxidation and enzymatic and nonenzymatic components of organism system under the influence of THz-waves of nitrogen oxide occurrence in stress conditions. Besides, there were shown changes of stress-regulating system activity and in concentration of important mediators - catecholamines and glucocorticosteroids. These data let characterize mechanism of realization of THz-waves basic effects. The research had shown the possibility of THz-waves of nitrogen oxide occurrence usage as a method of natural physiological noninvasive regulation of significant organism functions.

  15. Design of Smith-Purcell emitter in femtosecond accelerator

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on the femtosecond accelerator device,we are planning to build a broad band and tunable THz source using the Smith-Purcell tadiation mechanism.Coherent Smith-Purcell radiation could be achieved owing to the super-short bunch produced in the device.To shorten the distance between the beam and grating,we use Transport to match the beta function producing a sheet beam on the grating surface.The optimization of grating length,groove depth and groove width are given in the paper.Then the radiation power for the shallow and deep grating using these parameters are presented.The detection devices and methods are also briefly discussed.

  16. Optical phase locking of two infrared CW lasers separated by 100 THz

    CERN Document Server

    Chiodo, Nicola; Hrabina, Jan; Lours, Michel; Chea, Erick; Acef, Ouali

    2014-01-01

    We report on phase-locking of two continuous wave infrared laser sources separated by 100 THz emitting around 1029 nm and 1544 nm respectively. Our approach uses three independent harmonic generation processes of the IR laser frequencies in periodically poled MgO: LiNbO3 crystals to generate second and third harmonic of that two IR sources. The beat note between the two independent green radiations generated around 515 nm is used to phase-lock one IR laser to the other, with tunable radio frequency offset. In this way, the whole setup operates as a mini frequency comb (MFC) emitting four intense optical radiations (1544 nm, 1029 nm, 772 nm and 515 nm), with output powers at least 3 orders of magnitude higher than the available power from each mode emitted by femtosecond lasers.

  17. Study of light-induced processes in lithium niobate crystals with femtosecond light pulses; Untersuchung lichtinduzierter Prozesse in Lithiumniobat-Kristallen mit Femtosekunden-Lichtpulsen

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, O.

    2005-12-15

    For the realization of many applications with LiNbO{sub 3} a deeper understanding of nonlinear processes for high light intensities and the charge-carrier dynamics on short time scales is necessary. For the study in this thesis femtosecond pulses with a lifetime of {tau}{approx}200 fs are applied. By pump pulses ({lambda}{sub p}=388 nm) absorption changes are caused, which are detected time-resolvedly by probe pulses ({lambda}{sub r}=776 nm) respectively continuous light ({lambda}{sub r}=785 nm). For the absorption centers absorption cross sections of {sigma}{sub YY}{approx}9.2 x 10{sup -22} m{sup 2} for ordinarily {sigma}{sub Z}Z{approx}6.0 x 10{sup -22} m{sup 2} for extraordinarily polarized light of the wavelength {lambda}{sub r}=776 nm result.Polarization and wavelength dependence as well as the comparison with nanosecond pulses suggest that the absorption centers are small polarons, which exist already 400 fs after the excitation of the charge carriers. At holographic pump probe studies, which are sensitive both for absorption and for refractive-index changes, gratings with two pump pulses are generated and read out by one pump pulse. The time dependence of the diffraction efficiency of the transient grating in LiNbO{sub 3} exhibits first a symmetric maximum, the time width of which is compatible with the expectations from model calculations. Thereafter the diffraction efficiency decreases to a constant value in the picosecond range and decreases further on the nanosecond time scale. By illumination of iron-doped lithium niobate crystals with 1.5 {mu}m femtosecond pulses permanent refractive-index changes in the range {delta}n{approx}10{sup -3} ({lambda}=633 nm) are generated.

  18. Research on THz stepped-frequency ISAR imaging

    Science.gov (United States)

    Liang, Meiyan; Zhang, Zhiheng; Zhang, Cunlin

    2016-11-01

    High resolution THz inverse synthetic aperture radar (ISAR) imaging for the aircraft is simulated using 0.22THz stepped-frequency (SF) radar system which is designed in the paper. Based on the small rotate angle and the far field approximation, the Range-Doppler algorithm is proposed to reconstruct THz ISAR image of the aircraft. The simulation results indicate that THz stepped-frequency radar can achieve high resolution ISAR images of the aircraft, the resolution of the ISAR images can reach centimeter-scale, which laid a theoretical foundation for radar imaging in THz band.

  19. Photonic-integrated circuit for continuous-wave THz generation.

    Science.gov (United States)

    Theurer, Michael; Göbel, Thorsten; Stanze, Dennis; Troppenz, Ute; Soares, Francisco; Grote, Norbert; Schell, Martin

    2013-10-01

    We demonstrate a photonic-integrated circuit for continuous-wave (cw) terahertz (THz) generation. By comprising two lasers and an optical phase modulator on a single chip, the full control of the THz signal is enabled via a unique bidirectional operation technique. Integrated heaters allow for continuous tuning of the THz frequency over 570 GHz. Applied to a coherent cw THz photomixing system operated at 1.5 μm optical wavelength, we reach a signal-to-noise ratio of 44 dB at 1.25 THz, which is identical to the performance of a standard system based on discrete components.

  20. Thin layered drawing media probed by THz time-domain spectroscopy

    CERN Document Server

    Tasseva, J; Bartolini, P; Striova, J; Fontana, R; Torre, R

    2016-01-01

    Dry and wet drawing materials were investigated by THz time-domain spectroscopy in transmission mode. Carbon-based and iron-gall inks have been studied, some prepared following ancient recipes and others using current synthetic materials; a commercial ink was studied as well. We measured the THz signals on thin film of liquid inks deposited on polyethylene pellicles, comparing the results with the thick pellets of dried inks blended with polyethylene powder. This study required the implementation of a new experimental method and data analysis procedure able to provide a reliable extraction of the material transmission parameters from a structured sample composed of thin layers, down to thickness of few tens of micrometers. THz measurements on thin ink layers enabled the determination of both the absorption and the refractive index in an absolute scale in the 0.1 - 3 THz range, as well as the layer thickness. THz spectroscopic features of a paper sheet dyed by one of the iron-gall inks were also investigated. ...

  1. Few femtosecond level electron bunch diagnostic at quasi-cw electron accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Green, Bertram; Kuntzsch, Michael; Kovalev, Sergei; Hauser, Jens; Findeisen, Stefan; Schneider, Christian; Kaya, Caglar; Michel, Peter; Gensch, Michael [Helmholtz-Zentrum Dresden-Rossendorf (Germany); Al-Shemmary, Alaa; Stojanovic, Nikola [Deutsches Elektronen-Synchrotron (Germany)

    2013-07-01

    At the SRF based prototype cw accelerator ELBE a new electron beamline, providing for femtosecond electron bunches with nC bunch charges and repetition rates in the 1-200 KHz regime and with pC bunch charge and repetition rates of 13 MHz, is currently being constructed. The 40 MeV electrons will be used in photon-electron interaction experiments with TW and PW class lasers and the generation of broad and narrow bandwidth coherent THz pulses. Discussed here are ideas for novel online diagnostics of the electron bunch properties (e.g. arrival time and bunch form) based on the time and frequency domain analysis of the emitted coherent THz radiation, but also based on direct measurements by e.g. electro-optic sampling. The suitability of ELBE as a testbed for diagnostic of future cw X-ray photon sources (e.g. energy recovery linacs) will be discussed.

  2. THz radiation by beating Langmuir waves

    CERN Document Server

    Son, S; Park, J Y

    2013-01-01

    An intense terahertz (THz) radiation generated by the beating of two Langmuir waves, which are excited by the forward Raman scattering, is analyzed theoretically. The radiation energy per shot can be as high as 0.1 J, with the duration of 10 pico-second. Appropriate plasma density and the laser characteristics are examined.

  3. THz operation of asymmetric-nanochannel devices

    NARCIS (Netherlands)

    Balocco, C.; Halsall, M.; Vinh, N. Q.; Song, A. M.

    2008-01-01

    The THz spectrum lies between microwaves and the mid-infrared, a region that remains largely unexplored mainly due to the bottleneck issue of lacking compact, solid state, emitters and detectors. Here, we report on a novel asymmetric-nanochannel device, known as the self-switching device, which can

  4. Focal plane arrays for THz imaging

    NARCIS (Netherlands)

    Iacono, A.; Bencivenni, C.; Freni, A.; Neto, A.; Gerini, G.

    2012-01-01

    The growing attention for Terahertz technology finds support in the high number of applications which will benefit by its use. In the space science sector, the investigation of the THz frequency range will improve the knowledge of the universe, giving a clearer view on its origin and its evolution.

  5. Microring Diode Laser for THz Generation

    DEFF Research Database (Denmark)

    Mariani, S.; Andronico, A.; Favero, I.;

    2013-01-01

    We report on the modeling and optical characterization of AlGaAs/InAs quantum-dot microring diode lasers designed for terahertz (THz) difference frequency generation (DFG) between two whispering gallery modes (WGMs) around 1.3 $\\mu$m. In order to investigate the spectral features of this active...

  6. Quasioptical Imaging Systems at THz Frequencies

    NARCIS (Netherlands)

    Blazquez Valles, B.

    2015-01-01

    The Terahertz gap is the portion of the spectrum lying between 300 GHz and 3 THz. The initial development of Terahertz technology was driven by Space-based instruments for astrophysics, planetary, cometary and Earth science. However, in recent years, the interest of Terahertz science has been rapidl

  7. THz cavities and injectors for compact electron acceleration using laser-driven THz sources

    Directory of Open Access Journals (Sweden)

    Moein Fakhari

    2017-04-01

    Full Text Available We present a design methodology for developing ultrasmall electron injectors and accelerators based on cascaded cavities excited by short multicycle THz pulses obtained from laser-driven THz generation schemes. Based on the developed concept for optimal coupling of the THz pulse, a THz electron injector and two accelerating stages are designed. The designed electron gun consists of a four cell cavity operating at 300 GHz and a door-knob waveguide to coaxial coupler. Moreover, special designs are proposed to mitigate the problem of thermal heat flow and induced mechanical stress to achieve a stable device. We demonstrated a gun based on cascaded cavities that is powered by only 1.1 mJ of THz energy in 300 cycles to accelerate electron bunches up to 250 keV. An additional two linac sections can be added with five and four cell cavities both operating at 300 GHz boosting the bunch energy up to 1.2 MeV using a 4-mJ THz pulse.

  8. Nonlinear ultrafast dynamics of high temperature YBa2Cu3O7–δ superconductors probed with THz pump / THz probe spectroscopy

    Directory of Open Access Journals (Sweden)

    Chen H. T.

    2013-03-01

    Full Text Available High power THz pulses induce near transparency in superconductive YBCO thin films below the critical temperature. THz pump/THz probe measurements reveal a decay of the induced transparency on the time scale of a few picoseconds.

  9. Polymer microstructured fibers for guiding of THz radiation

    DEFF Research Database (Denmark)

    Nielsen, Kristian; Bang, Ole; Jepsen, Peter Uhd

    2010-01-01

    THz radiation, including low-loss transport of THz signals [1] between high-speed devices, integrated components for manipulation of THz light [2], such as power splitters, polarization management, and frequency filters, and confinement of the electric field of a THz signal in a small volume, enabling...... spectroscopic investigations of minute sample quantities [3]. In this presentation we will describe our current efforts in the development, fabrication and characterization of a class of THz waveguides and components based on microstructured polymer optical fibers (mPOF’s) [4] designed for the THz frequency...... fibers and components is carried out by THz time-domain spectroscopy, where the amplitude and phase of the transmitted signal through the sample is compared to a reference signal. In this manner we can characterize both loss and dispersion of the waveguide. In addition, near-field measurements across...

  10. Tunable THz Generation by the Interaction of a Super-luminous Laser Pulse with Biased Semiconductor Plasma

    Science.gov (United States)

    Papadopoulos, K.; Zigler, A.

    2006-01-01

    Terahertz (THz) radiation is electromagnetic radiation in the range between several hundred and a few thousand GHz. It covers the gap between fast-wave electronics (millimeter waves) and optics (infrared). This spectral region offers enormous potential for detection of explosives and chemical/biological agents, non-destructive testing of non-metallic structural materials and coatings of aircraft structures, medical imaging, bio-sensing of DNA stretching modes and high-altitude secure communications. The development of these applications has been hindered by the lack of powerful, tunable THz sources with controlled waveform. The need for such sources is accentuated by the strong, but selective absorption of THz radiation during transmission through air with high vapor content. The majority of the current experimental work relies on time-domain spectroscopy using fast electrically biased photoconductive sources in conjunction with femto-second mode-locked Ti:Sapphire lasers. These sources known as Large Aperture Photoconductive Antennas (LAPA) have very limited tunability, relatively low upper bound of power and no bandwidth control. The paper presents a novel source of THz radiation known as Miniature Photoconductive Capacitor Array (MPCA). Experiments demonstrated tunability between .1 - 2 THz, control of the relative bandwidth Δf/f between .5-.01, and controlled pulse length and pulse waveform (temporal shape, chirp, pulse-to-pulse modulation etc.). Direct scaling from the current device indicates efficiency in excess of 30% at 1 THz with 1/f2 scaling at higher frequencies, peak power of 100 kW and average power between .1-1 W. The physics underlying the MPCA is the interaction of a super-luminous ionization front generated by the oblique incidence of a Ti:Sapphire laser pulse on a semiconductor crystal (ZnSe) biased with an alternating electrostatic field, similar to that of a frozen wave generator. It is shown theoretically and experimentally that the

  11. Far-IR and THz Absorption Spectra Studies of Metronidazole, Tinidazole and Ornidazole%甲硝唑、替硝唑和奥硝唑药品的远红外与太赫兹吸收光谱研究

    Institute of Scientific and Technical Information of China (English)

    张振伟; 左剑; 张存林

    2012-01-01

    Metronidazole, tinidazole and ornidazole are 5-nitro-imidazole medicines used particularly for anaerobic bacteria and protozoa infections. The present paper reports that terahertz time-domain spectroscopy (THz-TDS) and Fourier transform infra-red spectroscopy (Far-FTIR) were used to measure the fingerprint spectra of metronidazole, tinidazole and ornidazole in the frequency range of 0. 9-19. 5 THz under the room temperature. In addition, THz-TDS was also used to measure the absorption spectra of pure tinidazole and tinidazole tablets from different manufactures between 0. 2 and 2. 2 THz. In parallel with the experimental study, the cross correlation analysis was applied to compare the array of correlation coefficients between pure tinidazole and different tinidazole tablets. Results show that the method is rapid, simple and accurate to identify their effective chemical compositions and stability when the FTIR and THz spectra data combine with the array of correlation coefficient. Our research provides a visual approach to the standardization and modernization of the quality control in the production and sale of such drugs.%甲硝唑、替硝唑和奥硝唑为5'-硝基咪唑类化合物,常用于抗厌氧菌和抗滴虫治疗.运用太赫兹时域光谱技术(THz-TDS)和傅里叶变换红外光谱(FTIR)技术在室温环境中测量了三种药品在0.9~19.5THz波段的光谱特性,得到其指纹谱.另外,通过探测替硝唑参照品和不同厂家、不同批次替硝唑药片在太赫兹波段的光谱信息,结合相关系数法、阵列相关系数法等信息处理技术对光谱信号进行数据挖掘;最终建立了一种能够快速、有效、系统地鉴定替硝唑片活性成分和稳定性的分析方法.研究结果为此类药品生产和销售质量的规范化和现代化提供了可视化途径.

  12. Femtosecond response time measurements of a Cs2Te photocathode

    Science.gov (United States)

    Aryshev, A.; Shevelev, M.; Honda, Y.; Terunuma, N.; Urakawa, J.

    2017-07-01

    Success in design and construction of a compact, high-brightness accelerator system is strongly related to the production of ultra-short electron beams. Recently, the approach to generate short electron bunches or pre-bunched beams in RF guns directly illuminating a high quantum efficiency semiconductor photocathode with femtosecond laser pulses has become attractive. The measurements of the photocathode response time in this case are essential. With an approach of the interferometer-type pulse splitter deep integration into a commercial Ti:Sa laser system used for RF guns, it has become possible to generate pre-bunched electron beams and obtain continuously variable electron bunch separation. In combination with a well-known zero-phasing technique, it allows us to estimate the response time of the most commonly used Cs2Te photocathode. It was demonstrated that the peak-to-peak rms time response of Cs2Te is of the order of 370 fs, and thereby, it is possible to generate and control a THz sequence of relativistic electron bunches by a conventional S-band RF gun. This result can also be applied for investigation of other cathode materials and electron beam temporal shaping and further opens a possibility to construct wide-range tunable, table-top THz free electron laser.

  13. Diagnostic technique of pine wood nematode disease based on THz spectrum

    Science.gov (United States)

    Liu, Yunfei; Tan, Jiajin; Jiang, Liang; Shi, Shengcai; Jin, Biaobing; Ma, Jinlong

    2008-12-01

    Pine wood nematode disease, namely pine wilt disease, is caused by the invasion of Bursaphelenchus xylophilus (Bx) into pines. Once susceptible pines are infected by the nematode, the disease develops rapidly, the infected pines cease to exude oleoresin and die quickly. Hence it is called pine cancer. Given the fact that there are still no good methods in diagnosing the disease, here we propose to study the spectroscopic characteristics of pine wood nematode and diseased pine wood in the THz regime in order to look for a rapid spectroscopic discrimination method for the disease. Firstly, we measure the transmittances of a Bx sample, a B. mucronatus (Bm) sample, a healthy Pinus massoniana wood sample and a diseased P. massoniana wood sample by a superconducting heterodyne mixer at 500 GHz. And their characteristics are compared. Secondly, we measure the transmission characteristics of a Bx sample and a Bm sample by terahertz time domain spectroscopy (THz-TDS). The measured time domain spectrums and corresponding frequency domain spectrums are compared to distinguish them from their absorption characteristics. Thirdly, we measure the transmission characteristics of a healthy P. massoniana wood sample and a diseased P. massoniana wood sample by THz TDS and compare their difference in THz absorption spectrum and diffraction dispersive spectrum to confirm the effect of Bx on P. massoniana by the absorption coefficient and refractive index. Some discussions are given for future development of the diagnostic technique of pine wood nematode disease based on THz spectrum.

  14. First observations with CONDOR, a 1.5 THz heterodyne receiver

    CERN Document Server

    Wiedner, M C; Bielau, F; Emprechtinger, M; Rettenbacher, K; Volgenau, N H; Graf, U; Honingh, C E; Jacobs, K; Vowinkel, B; Menten, K M; Nyman, L A A; Güsten, R; Philipp, S; Rabanus, D; Stutzki, J; Wyrowski, F

    2006-01-01

    The THz atmospheric windows centered at roughly 1.3 and 1.5~THz, contain numerous spectral lines of astronomical importance, including three high-J CO lines, the N+ line at 205 microns, and the ground transition of para-H2D+. The CO lines are tracers of hot (several 100K), dense gas; N+ is a cooling line of diffuse, ionized gas; the H2D+ line is a non-depleting tracer of cold (~20K), dense gas. As the THz lines benefit the study of diverse phenomena (from high-mass star-forming regions to the WIM to cold prestellar cores), we have built the CO N+ Deuterium Observations Receiver (CONDOR) to further explore the THz windows by ground-based observations. CONDOR was designed to be used at the Atacama Pathfinder EXperiment (APEX) and Stratospheric Observatory For Infrared Astronomy (SOFIA). CONDOR was installed at the APEX telescope and test observations were made to characterize the instrument. The combination of CONDOR on APEX successfully detected THz radiation from astronomical sources. CONDOR operated with typ...

  15. Intense THz Pulses with large ponderomotive potential generated from large aperture photoconductive antennas.

    Science.gov (United States)

    Ropagnol, X; Khorasaninejad, M; Raeiszadeh, M; Safavi-Naeini, S; Bouvier, M; Côté, C Y; Laramée, A; Reid, M; Gauthier, M A; Ozaki, T

    2016-05-30

    We report the generation of free space terahertz (THz) pulses with energy up to 8.3 ± 0.2 µJ from an encapsulated interdigitated ZnSe Large Aperture Photo-Conductive Antenna (LAPCA). An aperture of 12.2 cm2 is illuminated using a 400 nm pump laser with multi-mJ energies at 10 Hz repetition rate. The calculated THz peak electric field is 331 ± 4 kV/cm with a spectrum characterized by a median frequency of 0.28 THz. Given its relatively low frequency, this THz field will accelerate charged particles efficiently having very large ponderomotive energy of 15 ± 1 eV for electrons in vacuum. The scaling of the emission is studied with respect to the dimensions of the antenna, and it is observed that the capacitance of the LAPCA leads to a severe decrease in and distortion of the biasing voltage pulse, fundamentally limiting the maximum applied bias field and consequently the maximum energy of the radiated THz pulses. In order to demonstrate the advantages of this source in the strong field regime, an open-aperture Z-scan experiment was performed on n-doped InGaAs, which showed significant absorption bleaching.

  16. Advances in biomedical imaging using THz technology with applications to burn-wound assessment

    Science.gov (United States)

    Tewari, Priyamvada; Kealey, Colin; Sung, Jun; Maccabi, Ashkan; Bajwa, Neha; Singh, Rahul; Culjat, Martin; Stojadinovic, Alexander; Grundfest, Warren; Taylor, Zachary D.

    2012-02-01

    Terahertz (THz) hydration sensing and image has been a topic of increased interest recently due largely to improvements in source and detector technology and the identification of applications where current hydration sensing techniques are insufficient. THz medical imaging is an expanding field of research and tissue hydration plays a key role in the contrast observed in THz tissue reflectance and absorbance maps. This paper outlines the most recent results in burn and corneal imaging where hydration maps were used to assess tissue status. A 3 day study was carried out in rat models where a THz imaging system was used to assess the severity and extent of burn throughout the first day of injury and at the 24, 48, and 72 hour time points. Marked difference in tissue reflectance were observed between the partial and full thickness burns and image features were identified that may be used as diagnostic markers for burn severity. Companion histological analysis performed on tissue excised on Day 3 confirms hypothesized burn severity. The results of these preliminary animal trials suggest that THz imaging may be useful in burn wound assessment where current clinical modalities have resolution and/or sensitivity insufficient for accurate diagnostics.

  17. THz limb sounder (TLS) for lower thermospheric wind, oxygen density, and temperature

    Science.gov (United States)

    Wu, Dong L.; Yee, Jeng-Hwa; Schlecht, Erich; Mehdi, Imran; Siles, Jose; Drouin, Brian J.

    2016-07-01

    Neutral winds are one of the most critical measurements in the lower thermosphere and E region ionosphere (LTEI) for understanding complex electrodynamic processes and ion-neutral interactions. We are developing a high-sensitivity, low-power, noncryogenic 2.06 THz Schottky receiver to measure wind profiles at 100-140 km. The new technique, THz limb sounder (TLS), aims to measure LTEI winds by resolving the wind-induced Doppler shift of 2.06 THz atomic oxygen (OI) emissions. As a transition between fine structure levels in the ground electronic state, the OI emission is in local thermodynamic equilibrium (LTE) at altitudes up to 350 km. This LTE property, together with day-and-night capability and small line-of-sight gradient, makes the OI limb sounding a very attractive technique for neutral wind observations. In addition to the wind measurement, TLS can also retrieve [OI] density and neutral temperature in the LTEI region. TLS leverages rapid advances in THz receiver technologies including subharmonically pumped (SHP) mixers and Schottky-diode-based power multipliers. Current SHP Schottky receivers have produced good sensitivity for THz frequencies at ambient environment temperatures (120-150 K), which are achievable through passively cooling in spaceflight. As an emerging technique, TLS can fill the critical data gaps in the LTEI neutral wind observations to enable detailed studies on the coupling and dynamo processes between charged and neutral molecules.

  18. THz Limb Sounder (TLS) for Lower Thermospheric Wind, Oxygen Density, and Temperature

    Science.gov (United States)

    Wu, Dong L.; Yee, Jeng-Hwa; Schlecht, Erich; Mehdi, Imran; Siles, Jose; Drouin, Brian J.

    2016-01-01

    Neutral winds are one of the most critical measurements in the lower thermosphere and E region ionosphere (LTEI) for understanding complex electrodynamic processes and ion-neutral interactions. We are developing a high-sensitivity, low-power, noncryogenic 2.06 THz Schottky receiver to measure wind profiles at 100-140 km. The new technique, THz limb sounder (TLS), aims to measure LTEI winds by resolving the wind-induced Doppler shift of 2.06 THz atomic oxygen (OI) emissions. As a transition between fine structure levels in the ground electronic state, the OI emission is in local thermodynamic equilibrium(LTE) at altitudes up to 350km. This LTE property, together with day-and-night capability and small line-of-sight gradient, makes the OI limb sounding a very attractive technique for neutral wind observations. In addition to the wind measurement, TLS can also retrieve [OI] density and neutral temperature in the LTEI region. TLS leverages rapid advances in THz receiver technologies including subharmonically pumped (SHP)mixers and Schottky-diode-based power multipliers. Current SHP Schottky receivers have produced good sensitivity for THz frequencies at ambient environment temperatures (120-150 K), which are achievable through passively cooling in spaceflight. As an emerging technique, TLS can fill the critical data gaps in the LTEI neutral wind observations to enable detailed studies on the coupling and dynamo processes between charged and neutral molecules.

  19. Manipulation on human red blood cells with femtosecond optical tweezers

    Institute of Scientific and Technical Information of China (English)

    Ming Zhou; Haifeng Yang; Jianke Di; Enlan Zhao

    2008-01-01

    Different types of femtosecond optical tweezers have become a powerful tool in the modern biological field. However, how to control the irregular targets, including biological cells, using femtosecond optical tweezers remains to be explored. In this study, human red blood cells (hRBCs) are manipulated with femtosecond optical tweezers, and their states under different laser powers are investigated. The results indicate that optical potential traps only can capture the edge of hRBCs under the laser power from 1.4 to 2.8 mW, while it can make hRBCs turn over with the laser power more than 2.8 roW. It is suggested that femtosecond optical tweezers could not only manipulate biological cells, but also subtly control its states by adjusting the laser power.

  20. THz Time-Domain Spectroscopy of Mixed CO2-CH3OH Interstellar Ice Analogs

    CERN Document Server

    McGuire, Brett A; Allodi, Marco A; Blake, Geoffrey A

    2016-01-01

    The icy mantles of interstellar dust grains are the birthplaces of the primordial prebiotic molecular inventory that may eventually seed nascent solar systems and the planets and planetesimals that form therein. Here, we present a study of two of the most abundant species in these ices after water: carbon dioxide (CO2) and methanol (CH3OH) using TeraHertz (THz) time-domain spectroscopy and mid-infrared spectroscopy. We study pure and mixed-ices of these species, and demonstrate the power of the THz region of the spectrum to elucidate the long-range structure (i.e. crystalline versus amorphous) of the ice, the degree of segregation of these species within the ice, and the thermal history of the species within the ice. Finally, we comment on the utility of the THz transitions arising from these ices for use in astronomical observations of interstellar ices.

  1. Femtosecond transient absorption spectroscopy study of the early events of norfloxacin in aqueous solutions with varying pH values.

    Science.gov (United States)

    Su, Tao; Li, Ming-De; Ma, Jiani; Wong, Naikei; Phillips, David Lee

    2014-11-26

    The photophysics and photochemistry of norfloxacin (NF) have been investigated in aqueous solutions of different pH using femtosecond transient absorption spectroscopy (fs-TA). Resonance Raman spectroscopic experiments on NF have also been conducted in aqueous solutions of different pH to characterize the vibrational and structural information on the initial forms of NF. The experimental results in combination with density functional theory calculations of the key intermediates help us to elucidate the early events for NF after photoexcitation in aqueous solutions with varying pH values. The fs-TA results indicate that NF mainly underwent photophysical processes on the early delay time scale (before 3 ns), and no photochemical reactions occurred on this time scale. Specifically, after the irradiation of NF, the molecule reaches a higher excited singlet Sn and then decays to the lowest-lying excited singlet state S1 followed by intersystem crossing to transform into the lowest-lying triplet state T1 with a high efficiency, with an exception that there is a lower efficiency observed in basic aqueous solution due to the generation of an intramolecular electron transfer as an additional pathway to waste energy.

  2. Molecular structure, spectroscopic (FT-IR, FT Raman, UV, NMR and THz) investigation and hyperpolarizability studies of 3-(2-Chloro-6-fluorophenyl)-1-(2-thienyl) prop-2-en-1-one

    Science.gov (United States)

    Kumar, Rajesh; Kumar, Amit; Deval, Vipin; Gupta, Archana; Tandon, Poonam; Patil, P. S.; Deshmukh, Prathmesh; Chaturvedi, Deepika; Watve, J. G.

    2017-02-01

    In the present work, a combined experimental and theoretical study on ground state molecular structure, spectroscopic and nonlinear optical properties of the chalcone derivative 3-(2-Chloro-6-fluorophenyl)-1-(2-thienyl) prop-2-en-1-one (2C6F2SC) is reported. Initial geometry generated from single crystal X-ray diffraction parameters was minimized at DFT level employing B3LYP/6-311++G (d,p) without any constraint to the potential energy surface. The molecule has been characterized using various experimental techniques FT-IR, FT-Raman, UV-Vis, 1H NMR, TD-THz and the spectroscopic data have been analyzed theoretically by Density Functional Theory (DFT) method. Harmonic vibrational frequencies were calculated theoretically using the optimized ground state geometry and the spectra were interpreted by means of potential energy distribution. Time Dependent Density Functional Theory (TD-DFT) has been used to calculate energies, absorption wavelengths, oscillator strengths of electronic singlet-singlet transitions. The calculated energy and oscillator strength complement with the experimental findings. The HOMO-LUMO energy gap explains the charge interaction taking place within the molecule. Good correlations between the experimental 1H NMR chemical shifts and calculated GIAO shielding tensors were found. Stability of the molecule, hyperconjugative interactions and charge delocalization has been analyzed by natural bond orbital (NBO) analysis. The first order hyperpolarizability (β) of this molecular system and related properties (μ, and Δα) have been calculated using the finite-field approach.

  3. Millimeter-wave/THz FMCW radar techniques for sensing applications

    Science.gov (United States)

    Mirando, D. Amal; Higgins, Michael D.; Wang, Fenggui; Petkie, Douglas T.

    2016-10-01

    Millimeter-wave and terahertz continuous-wave radar systems have been used to measure physiological signatures for biometric applications and for a variety of non-destructive evaluation applications, such as the detection of defects in materials. Sensing strategies for the simplest homodyne systems, such as a Michelson Interferometer, can be enhanced by using Frequency Modulated Continuous Wave (FMCW) techniques. This allows multiple objects or surfaces to be range resolved while monitoring the phase of the signal in a particular range bin. We will discuss the latest developments in several studies aimed at demonstrating how FMCW techniques can enhance mmW/THz sensing applications.

  4. MEASUREMENTS OF HIGH-FIELD THZ INDUCED PHOTOCURRENTS IN SEMICONDUCTORS

    Energy Technology Data Exchange (ETDEWEB)

    Wiczer, M.; Lindenberg, A.

    2008-01-01

    THz pulses have provided a useful tool for probing the time-resolved dynamics of free carriers in a system. However, the development of methods to produce intense THz radiation has been slow. We have developed a method for producing intense ultra-short THz pulses, which have a full width at half maximum of 300 fs — approximately a half cycle of THz radiation. These intense half cycle pulses (HCPs) allowed us to use THz radiation as a source of excitation. By exposing the semiconductor indium antimonide (InSb) to intense THz HCP radiation, we have observed non-linear optical effects which suggest the generation of new free carriers by below band-gap THz photons. This generation of free carriers appears to be due to an avalanche multiplication process which then induces a current in the time-scale of our THz pulse. This amplifi cation on such a short timescale suggests the possibility of an ultrafast detector of weak above band-gap radiation. We constructed a device which detects these currents by painting an electrode structure on the surface of the semiconductor. The currents induced across the electrodes by this avalanche multiplication process were measured and compared with other measurements of this non-linear optical process. We successfully measured THz induced currents in InSb, suggesting promise towards the development of an ultra-fast detector. Further, we have gained insight into a possible physical explanation of the THz induced free carriers we observe in InSb.

  5. Design and research for biosensing THz microfluidic chips

    Science.gov (United States)

    Fan, Ning; Su, Bo; Zhang, Cong; Zhang, Cunlin

    2016-11-01

    Many Biomolecules vibration frequencies are in terahertz (0.1THz-10THz) frequency range, so terahertz (THz) technology is an essential tool for detecting biological molecules. However, due to terahertz strongly absorbed by water, it is difficult to detect these molecules for biological and chemical liquid samples. Therefore, we present a novel detection method by combining terahertz technology with microfluidic technology. The strong absorption of water is effectively overcome by controlling the length that terahertz passes through liquid samples. What's more, a higher signal to noise ratio is obtained through using less samples. In this paper, we designed a THz microfluidic chip that is easy to be fabricated by using the materials of Zeonor and polydimethylsiloxane (PDMS). Using terahertz time-domainspectroscopy (THz-TDS) system, we find that the chip has a high transmittance above 80% in the range from 0.2 THz to 2.6 THz. Then the THz spectra of deionized water and different kinds of solutions with different concentrations in the microfluidic chip were measured, respectively. In our research, it is found that different kinds of solutions have different transmission coefficients for THz. In addition, the THz transmission and absorption spectrum changes with the concentration of the same kind of solution.

  6. Use of THz Reflectometry for Roughness Estimations of Archeological Metal Surfaces

    Science.gov (United States)

    Cacciari, Ilaria; Siano, Salvatore

    2017-04-01

    In this work, using a time domain spectrometer, we have investigated the reflection of terahertz (THz) pulses from surfaces that exhibit a variable degree of roughness. The study was mainly aimed at assessing the influence of the surface texture on the amplitude and the shape of the pulses reflected by stratified materials and at exploring the potential of this technique for achieving quantitative information on the roughness of the material interfaces hit by the THz beam. The behavior of the reflected THz pulses was investigated by considering angular measurements on a set of suitable mock-ups. Measurements were carried out on an authentic archeological Roman coin that exhibited different corrosion situations. An electromagnetic model was used for estimating the roughness of outer and inner surfaces. The comparison of the results with those provided by other techniques made it possible to parameterize the surface texture such as the traditional contact micro-profilometry and the more recently used 3D digital microscopy.

  7. Composite THz materials using aligned metallic and semiconductor microwires, experiments and interpretation

    CERN Document Server

    Mazhorova, Anna; Dupuis, Alexandre; Tsuneyuki, Ozaki; Paccianti, Marco; Morandotti, Roberto; Minamide, Hiroaki; Tang, Ming; Wang, Yuye; Ito, Hiromasa; Skorobogatiy, Maksim

    2010-01-01

    We report fabrication method and THz characterization of composite films containing either aligned metallic (tin alloy) microwires or chalcogenide As2Se3 microwires. The microwire arrays are made by stack-and-draw fiber fabrication technique using multi-step co-drawing of low-melting-temperature metals or semiconductor glasses together with polymers. Fibers are then stacked together and pressed into composite films. Transmission through metamaterial films is studied in the whole THz range (0.1-20 THz) using a combination of FTIR and TDS. Metal containing metamaterials are found to have strong polarizing properties, while semiconductor containing materials are polarization independent and could have a designable high refractive index. Using the transfer matrix theory, we show how to retrieve the complex polarization dependent refractive index of the composite films. We then detail the selfconsistent algorithm for retrieving the optical properties of the metal alloy used in the fabrication of the metamaterial l...

  8. High-efficiency THz modulator based on phthalocyanine-compound organic films

    Energy Technology Data Exchange (ETDEWEB)

    He, Ting; Zhang, Bo, E-mail: bzhang@cnu.edu.cn, E-mail: sjl-phy@cnu.edu.cn; Shen, Jingling, E-mail: bzhang@cnu.edu.cn, E-mail: sjl-phy@cnu.edu.cn; Zang, Mengdi; Chen, Tianji [Beijing Key Laboratory for Terahertz Spectroscopy and Imaging, Key Laboratory of Terahertz Optoelectronics, Ministry of Education, Department of Physics, Capital Normal University, Beijing 100048 (China); Hu, Yufeng; Hou, Yanbing [Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China)

    2015-02-02

    We report a high efficiency, broadband terahertz (THz) modulator following a study of phthalocyanine-compound organic films irradiated with an external excitation laser. Both transmission and reflection modulations of each organic/silicon bilayers were measured using THz time-domain and continuous-wave systems. For very low intensities, the experimental results show that AlClPc/Si can achieve a high modulation factor for transmission and reflection, indicating that AlClPc/Si has a superior modulation efficiency compared with the other films (CuPc and SnCl{sub 2}Pc). In contrast, the strong attenuation of the transmitted and reflected THz waves revealed that a nonlinear absorption process takes place at the organic/silicon interface.

  9. Transmission Properties of Metallic Grating with Subwavelength Slits in THz Frequency Region

    Directory of Open Access Journals (Sweden)

    Dong Liang

    2007-01-01

    Full Text Available This paper presents a fully experimental and theoretical study on transmission properties of a deep metallic grating with subwavelength slits in THz frequency region by using THz time domain spectroscopy (THz-TDS. The grating exposed to p-polarized incident wave exhibits enhanced nonresonant transmission in the long-wavelength region where the incident wavelength is larger than the grating period. Wood anomalies are observed when the wavelength is comparable to the grating period. Strict theory is given to explain the experimental results and the two are in good agreement. It is proposed that the Wood dips may be considered a criterion and a tool to judge and control the uniformity or fabricating accuracy of the grating period.

  10. Use of THz Reflectometry for Roughness Estimations of Archeological Metal Surfaces

    Science.gov (United States)

    Cacciari, Ilaria; Siano, Salvatore

    2017-01-01

    In this work, using a time domain spectrometer, we have investigated the reflection of terahertz (THz) pulses from surfaces that exhibit a variable degree of roughness. The study was mainly aimed at assessing the influence of the surface texture on the amplitude and the shape of the pulses reflected by stratified materials and at exploring the potential of this technique for achieving quantitative information on the roughness of the material interfaces hit by the THz beam. The behavior of the reflected THz pulses was investigated by considering angular measurements on a set of suitable mock-ups. Measurements were carried out on an authentic archeological Roman coin that exhibited different corrosion situations. An electromagnetic model was used for estimating the roughness of outer and inner surfaces. The comparison of the results with those provided by other techniques made it possible to parameterize the surface texture such as the traditional contact micro-profilometry and the more recently used 3D digital microscopy.

  11. THz wave emission from argon in two-color laser field

    Institute of Scientific and Technical Information of China (English)

    杜玲玲; 赵松峰; 周效信; 赵增秀

    2015-01-01

    Terahertz (THz) wave emission from argon atom in a two-color laser pulses is studied numerically by solving the one-dimensional (1D) time-dependent Schr ¨odinger equation. The THz spectra we obtained include both discontinuous and continuum ones. By using the special basis functions that we previously proposed, our analysis points out that the discontinuous and continuum parts are contributed by bound–bound and continuum–continuum transition of atomic energy levels. Although the atomic wave function is strongly dressed during the interaction with laser fields, our identification for the discontinuous part of the THz wave shows that the transition between highly excited bound states can still be well described by the field-free basis function in the tunneling ionization regime.

  12. Optical and THz investigations of mid-IR materials exposed to alpha particle irradiation

    Science.gov (United States)

    Sporea, Dan; Mihai, Laura; Sporea, Adelina; Vâţã, Ion

    2017-01-01

    The paper is the first comprehensive study on alpha particle irradiation effects on four mid-IR materials: CaF2, BaF2, Al2O3 (sapphire) and ZnSe. The measurements of the optical spectral transmittance, spectral diffuse reflectance, radioluminescent emission, terahertz (THz) spectral response, transmittance, absorbance, refractive index, real and imaginary parts of the dielectric constant and THz imaging are used as complementary investigations to evaluate these effects. The simulations were run to estimate: (i) the penetration depth, (ii) the scattering of alpha particle beam, (iii) the amount of material affected by this interaction, and (iv) the number of vacancies produced by the radiation exposure for each type of material. The simulation results are compared to the off-line measurement outcomes. The delay and spectral composition change of the reflected THz signal highlight the modification induced in the tested materials by the irradiation process. PMID:28067289

  13. Optical and THz investigations of mid-IR materials exposed to alpha particle irradiation

    Science.gov (United States)

    Sporea, Dan; Mihai, Laura; Sporea, Adelina; Vâţã, Ion

    2017-01-01

    The paper is the first comprehensive study on alpha particle irradiation effects on four mid-IR materials: CaF2, BaF2, Al2O3 (sapphire) and ZnSe. The measurements of the optical spectral transmittance, spectral diffuse reflectance, radioluminescent emission, terahertz (THz) spectral response, transmittance, absorbance, refractive index, real and imaginary parts of the dielectric constant and THz imaging are used as complementary investigations to evaluate these effects. The simulations were run to estimate: (i) the penetration depth, (ii) the scattering of alpha particle beam, (iii) the amount of material affected by this interaction, and (iv) the number of vacancies produced by the radiation exposure for each type of material. The simulation results are compared to the off-line measurement outcomes. The delay and spectral composition change of the reflected THz signal highlight the modification induced in the tested materials by the irradiation process.

  14. Asymmetric devices based on carbon nanotubes as detectors of sub-THz radiation

    Science.gov (United States)

    Gayduchenko, I. A.; Fedorov, G. E.; Stepanova, T. S.; Titova, N.; Voronov, B. M.; But, D.; Coquillat, D.; Diakonova, N.; Knap, W.; Goltsman, G. N.

    2016-08-01

    Demand for efficient terahertz (THz) radiation detectors resulted in intensive study of the asymmetric carbon nanostructures as a possible solution for that problem. In this work, we systematically investigate the response of asymmetric carbon nanodevices to sub-terahertz radiation using different sensing elements: from dense carbon nanotube (CNT) network to individual CNT. We conclude that the detectors based on individual CNTs both semiconducting and quasi-metallic demonstrate much stronger response in sub-THz region than detectors based on disordered CNT networks at room temperature. We also demonstrate the possibility of using asymmetric detectors based on CNT for imaging in the THz range at room temperature. Further optimization of the device configuration may result in appearance of novel terahertz radiation detectors.

  15. THz-waves channeling in a monolithic saddle-coil for Dynamic Nuclear Polarization enhanced NMR.

    Science.gov (United States)

    Macor, A; de Rijk, E; Annino, G; Alberti, S; Ansermet, J-Ph

    2011-10-01

    A saddle coil manufactured by electric discharge machining (EDM) from a solid piece of copper has recently been realized at EPFL for Dynamic Nuclear Polarization enhanced Nuclear Magnetic Resonance experiments (DNP-NMR) at 9.4 T. The corresponding electromagnetic behavior of radio-frequency (400 MHz) and THz (263 GHz) waves were studied by numerical simulation in various measurement configurations. Moreover, we present an experimental method by which the results of the THz-wave numerical modeling are validated. On the basis of the good agreement between numerical and experimental results, we conducted by numerical simulation a systematic analysis on the influence of the coil geometry and of the sample properties on the THz-wave field, which is crucial in view of the optimization of DNP-NMR in solids.

  16. Femtosecond laser additive manufacturing of YSZ

    Science.gov (United States)

    Liu, Jian; Bai, Shuang

    2017-04-01

    Laser additive manufacturing (LAM) of Yttria-Stabilized Zirconia (YSZ) is investigated using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. High-density (>99%) YSZ part with refined grain and increased hardness was obtained. Microstructure features of fabricated specimens were studied with SEM, EDX, the measured micro hardness is achieved as high as 18.84 GPa.

  17. Femtosecond laser additive manufacturing of YSZ

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jian; Bai, Shuang [PolarOnyx, Inc., San Jose, CA (United States)

    2017-04-15

    Laser additive manufacturing (LAM) of Yttria-Stabilized Zirconia (YSZ) is investigated using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. High-density (>99%) YSZ part with refined grain and increased hardness was obtained. Microstructure features of fabricated specimens were studied with SEM, EDX, the measured micro hardness is achieved as high as 18.84 GPa. (orig.)

  18. Graphene-enhanced metamaterials in THz applications

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Chigrin, Dmitry N.; Khromova, Irina

    Terahertz (THz) radiation is widely employed in a broad range of fields in biology, medicine, communication, security, chemistry, and spectroscopy. To expand the application of terahertz radiation new device designs and fabrication methods are needed. The ability of metamaterials to manipulate...... electromagnetic waves makes them natural candidates for THz optical components [1]. However, ranges of light manipulation can be strongly expanded by involving graphene as a structural component of metamaterials. The interplay between interband and intraband transitions in graphene allows converting a multilayer...... of the whole structure. Placed inside a hollow waveguide, a multilayer graphene/dielectric metamaterial provides high-speed modulation of radiation and offers novel concepts for terahertz modulators and tunable bandpass filters. We exemplify it showing performance of waveguide-based terahertz modulators...

  19. THz operation of asymmetric-nanochannel devices

    Science.gov (United States)

    Balocco, C.; Halsall, M.; Vinh, N. Q.; Song, A. M.

    2008-09-01

    The THz spectrum lies between microwaves and the mid-infrared, a region that remains largely unexplored mainly due to the bottleneck issue of lacking compact, solid state, emitters and detectors. Here, we report on a novel asymmetric-nanochannel device, known as the self-switching device, which can operate at frequencies up to 2.5 THz for temperature up to 150 K. This is, to our knowledge, not only the simplest diode but also the quickest acting electronic nanodevice reported to date. The radiation was generated by the free electron laser FELIX (Netherlands). The dependences of the device efficiency as a function of the electric bias, radiation intensity, radiation frequency and temperature are reported.

  20. Electromagnetic THz Radiation Modeling by DPSM

    Science.gov (United States)

    Rahani, Ehsan Kabiri; Kundu, Tribikram

    2012-03-01

    THz or T-ray imaging and spectroscopy are becoming increasingly popular nondestructive evaluation techniques for damage detection and characterization of materials. In order to understand the interaction between the T-ray electromagnetic waves and dielectric media a reliable model of electromagnetic wave propagation through dielectric materials must be developed. A recently developed semi-analytical method called the distributed point source method (DPSM) is extended to model electromagnetic wave propagation in THz range. Since T-ray signals generated by emitters or sources are close to Gaussian beams, the DPSM modeling is carried out for Gaussian beams generated by finite sized emitters. The DPSM generated results are compared with the analytical and experimental results. T-ray propagation in layered structures in absence of any anomaly and the interaction between the Gaussian beam and the spherical scatterer are also investigated.

  1. Spatio-spectral characteristics of ultra-broadband THz emission from two-colour photoexcited gas plasmas and their impact for nonlinear spectroscopy

    Science.gov (United States)

    Blank, V.; Thomson, M. D.; Roskos, H. G.

    2013-07-01

    We present a characterization of the combined spatial and spectral properties of the terahertz (THz) and mid-infrared emission from gas plasmas generated and driven by two-colour femtosecond optical pulses. For its use in nonlinear spectroscopy, the impact of the relatively complex spatial profile for both broadband (∼ 10 THz) and ultra-broadband (> 100 THz) emission needs to be considered, in particular for experiments based on z-scan techniques. Here we apply spatially resolved measurements based on both field autocorrelation and sum-frequency (up-conversion) detection. Based on these results, we present simulations of the ultra-broadband profile during its passage through a focal region. In addition to the inherent features of the emission profile due to the generation mechanism in the plasma filament, we also analyse the role of the semconductor (silicon) wafer typically placed after the plasma to discard the optical pump beams, whose photoexcitation also can play a role in the resultant THz profile.

  2. Influence of Reflections on Frequency Tunability and Mode Competition in the Second-Harmonic THz Gyrotron

    Science.gov (United States)

    Khutoryan, Eduard M.; Idehara, Toshitaka; Melnikova, Maria M.; Ryskin, Nikita M.; Dumbrajs, Olgierd

    2017-07-01

    Effect of delayed reflection on operation of a second-harmonic terahertz (THz)-band gyrotron is studied. Theoretical analyses, numerical calculations, and experimental observations for the 0.394-THz Fukui University (FU) and continuous wave (CW) IIB gyrotron are presented. The reflections decrease starting current and expand frequency tunability range owing to excitation of high-order axial modes. They also increase frequency stability, i.e., reduce frequency change due to variation of the magnetic field. In addition, the reflections strongly affect mode competition causing suppress of the second-harmonic mode by the fundamental one and vice versa or, in the case of cooperative mode interaction, mutual power increase.

  3. The source of THz radiation based on dielectric waveguide excited by sequence of electron bunches

    Science.gov (United States)

    Altmark, A. M.; Kanareykin, A. D.

    2016-07-01

    We present a new method for excitation of THz Cherenkov radiation in a dielectric waveguide by relativistic electron bunches. A sequence of bunches generates monochromatic radiation. The frequency of radiation is defined by the distance between the bunches. The studies were carried by using the newly updated BBU-3000 code which permits taking into account a number of additional options: an external quadrupole focusing system, group velocity of the wakefield, and the dielectric material loss factor. In this paper, we present our algorithm for optimizing the number and sequential positions of bunches for generation of narrow band high power THz radiation.

  4. Cutting NiTi with Femtosecond Laser

    Directory of Open Access Journals (Sweden)

    L. Quintino

    2013-01-01

    Full Text Available Superelastic shape memory alloys are difficult to machine by thermal processes due to the facility for Ti oxidation and by mechanical processes due to their superelastic behavior. In this study, femtosecond lasers were tested to analyze the potential for machining NiTi since femtosecond lasers allow nonthermal processing of materials by ablation. The effect of processing parameters on machining depth was studied, and material removal rates were computed. Surfaces produced were analyzed under SEM which shows a resolidified thin layer with minimal heat affected zones. However, for high cutting speeds, that is, for short interaction times, this layer was not observed. A depletion of Ni was seen which may be beneficial in biomedical applications since Ni is known to produce human tissue reactions in biophysical environments.

  5. High density THz frequency comb produced by coherent synchrotron radiation

    CERN Document Server

    Tammaro, S; Roy, P; Lampin, J -F; Ducournau, G; Cuisset, A; Hindle, F; Mouret, G

    2014-01-01

    Frequency combs (FC) have radically changed the landscape of frequency metrology and high-resolution spectroscopy investigations extending tremendously the achievable resolution while increasing signal to noise ratio. Initially developed in the visible and near-IR spectral regions, the use of FC has been expanded to mid-IR, extreme ultra-violet and X-ray. Significant effort is presently dedicated to the generation of FC at THz frequencies. One solution based on converting a stabilized optical frequency comb using a photoconductive terahertz emitter, remains hampered by the low available THz power. Another approach is based on active mode locked THz quantum-cascade-lasers providing intense FC over a relatively limited spectral extension. Alternatively, here we show that dense powerful THz FC is generated over one decade of frequency by coherent synchrotron radiation (CSR). In this mode, the entire ring behaves in a similar fashion to a THz resonator wherein electron bunches emit powerful THz pulses quasi-synch...

  6. THz-conductivity of CVD graphene on different substrates

    OpenAIRE

    Gabriel Cortés, Daniel; Sempere, Bernat; Colominas, Carles; Ferrer Anglada, Núria

    2015-01-01

    Optoelectronic properties of CVD graphene are charac-terized over a wide frequency range: THz, IR, visible and near-UV. We used Raman spectroscopy to characterize the synthesized graphene films. All graphene layers were deposited on various substrates, some ones transparent or flexible, such as polyethylene terephthalate (PET), polyethylene naphthalate (PEN), quartz and silicon. Transmission Terahertz time-domain spectroscopy (THz-TDS) method, in the range from 100 GHz to 3 THz, is used to an...

  7. High-dispersive mirrors for femtosecond lasers.

    Science.gov (United States)

    Pervak, V; Teisset, C; Sugita, A; Naumov, S; Krausz, F; Apolonski, A

    2008-07-07

    We report on the development of highly dispersive mirrors for chirped-pulse oscillators (CPO) and amplifiers (CPA). In this proof-of-concept study, we demonstrate the usability of highly dispersive multilayer mirrors for high-energy femtosecond oscillators, namely for i) a chirped-pulse Ti:Sa oscillator and ii) an Yb:YAG disk oscillator. In both cases a group delay dispersion (GDD) of the order of 2x10(4) fs(2) was introduced, accompanied with an overall transmission loss as low as approximately 2 per cent. This unprecedented combination of high dispersion and low loss over a sizeable bandwidth with multilayer structures opens the prospects for femtosecond CPA systems equipped with a compact, alignment-insensitive all-mirror compressors providing compensation of GDD as well as higher-order dispersion.

  8. Detection Techniques of Femtosecond Lasers

    Institute of Scientific and Technical Information of China (English)

    LIU Li-peng; ZHOU Ming; DAI Qi-xun; CAI Lan

    2004-01-01

    The measurement techniques of femtosecond spectroscopy are effective method to investigate ultrafast dynamics, they are widely used in the fields of physics, chemistry and biology. In this paper, the principle, experiment setup and the approaches to deal with the experiment data were presented. Then different measurement techniques such as transient absorption spectroscopy, photon echoes, optical Kerr effect and degenerate four-wave mixing were explained with special examples. At last, the application prospect of measurement techniques of femtosecond spectroscopy was forecasted.

  9. THz quantum cascade lasers for standoff molecule detection.

    Energy Technology Data Exchange (ETDEWEB)

    Chow, Weng Wah; Wanke, Michael Clement; Lerttamrab, Maytee; Waldmueller, Ines

    2007-10-01

    Remote optical detection of molecules, agents, and energetic materials has many applications to national security interests. Currently there is significant interest in determining under what circumstances THz frequency coverage will aid in a complete sensing package. Sources of coherent THz frequency (i.e. 0.1 to 10 THz) electromagnetic radiation with requisite power levels, frequency agility, compactness and reliability represent the single greatest obstacle in establishing a THz technology base, but recent advances in semiconductor-based quantum cascade lasers (QCLs) offer huge improvements towards the ultimate THz source goals. This project advanced the development of narrow-linewidth THz quantum cascade lasers. We developed theoretical tools to guide the improvement of standard THz quantum cascade lasers, the investigation of nonlinear optics employing infrared QCLs, and the exploration of quantum coherence to improve QCL performance. The latter was aimed especially towards achieving high temperature operation. In addition we developed a computer algorithm capable of shifting the frequencies of an existing THz QCL to a different frequency and invented a new type of laser that may enable room temperature THz generation in a electrically driven solid-state source.

  10. Compact THz radiation source based on photocathode RF gun

    Institute of Scientific and Technical Information of China (English)

    URAKAWA; JunJi

    2011-01-01

    Terahertz (THz) science and technology have already become the research highlight at present. In this paper, we put forward a proposal to generate THz radiation at tens of MW peak power. As a result of the ultrafast laser and the high accelerating field of photocathode RF gun, we can generate and accelerate an electron beam to several MeV, of which the bunch length is less than sub-ps. When the short electron bunches are injected into the wiggler, THz radiation based on Coherent Synchrotron Radiation could be achieved with tens of MW peak power. The whole THz FEL facility can be scaled to the size of a tabletop.

  11. Study of nonlinear optical absorption properties of V{sub 2}O{sub 5} nanoparticles in the femtosecond excitation regime

    Energy Technology Data Exchange (ETDEWEB)

    Molli, Muralikrishna; Bhat Kademane, Abhijit; Pradhan, Prabin; Sai Muthukumar, V. [Sri Sathya Sai Institute of Higher Learning, Department of Physics, Puttaparthi, Andhra Pradesh (India)

    2016-08-15

    In this work, we report for the first time, the nonlinear optical absorption properties of vanadium pentoxide (V{sub 2}O{sub 5}) nanoparticles in the femtosecond excitation regime. V{sub 2}O{sub 5} nanoparticles were synthesized through solution combustion technique. The as-synthesized samples were further characterized using XRD, FESEM, EDAX, TEM and UV-visible spectroscopy. X-ray diffraction results revealed the crystalline nature of the nanoparticles. Electron microscopy studies showed the size of the nanoparticles to be ∝200 nm. Open-aperture z-scan technique was employed to study the nonlinear optical absorption behavior of the synthesized samples using a 100-fs laser pulses at 800 nm from a regeneratively amplified Ti: sapphire laser. The mechanism of nonlinear absorption was found to be a three-photon absorption process which was explained using the density of states of V{sub 2}O{sub 5} obtained using density functional theory. These nanoparticles exhibit strong intensity-dependent nonlinear optical absorption and hence could be considered for optical-power-limiting applications. (orig.)

  12. Study on the effect of ambient gas on nanostructure formation on metal surfaces during femtosecond laser ablation for fabrication of low-reflective surfaces

    Science.gov (United States)

    Smausz, Tomi; Csizmadia, Tamás; Tápai, Csaba; Kopniczky, Judit; Oszkó, Albert; Ehrhardt, Martin; Lorenz, Pierre; Zimmer, Klaus; Prager, Andrea; Hopp, Béla

    2016-12-01

    Nanostructure formation on bulk metals (silver, gold, copper and titanium) by femtosecond Ti-sapphire laser irradiation (775 nm, 150 fs) is studied aiming the production of low-reflectivity surfaces and the better understanding of the development process. The experiments were performed in nitrogen, air, oxygen and helium environments at atmospheric pressure. The samples were irradiated with fluences in the 0.1-2 J/cm2 range and an average pulse number of 100 falling over a given area. The reflectivity of the treated surfaces was determined by a microspectrometer in the 450-800 nm range and their morphology was studied by scanning electron microscopy. The gas ambience influenced the results via two effects: formation processes and the chemically-induced modifications of the nanostructures. In case of He the nanoparticle aggregates-otherwise generally present-are predominantly missing, which leads to a lower darkening efficiency. The presence of oxygen enhances the darkening effect for copper mostly at lower fluences, while causes a slow increase in reflectivity in the case of titanium (in case of pure oxygen) in the high fluence range. The surface morphology in case of nitrogen and air were quite similar probably due to their close molecular mass values.

  13. Theory of THz harmonic generation in semiconductor superlattices (Conference Presentation)

    Science.gov (United States)

    Pereira, Mauro F.; Winge, David O.; Wacker, Andreas

    2016-10-01

    Superlattices are artificial structures with a wide range of applications and open possibilities for controlling and study transport and optical [M.F. Pereira Jr., Phys. Rev. B 52, (1995)] properties of semiconductors. In this work, we start from the full Nonequilibrium Greens Functions approach [A. Wacker et a, IEEE Journal of Sel. Top. in Quantum Electron.,19 1200611, (2013),T. Schmielau and M.F. Pereira, Appl. Phys. Lett. 95 231111, (2009)] to obtain Voltage-Current curves and compare them with experiments. By adjusting the numerical solutions of the corresponding Dyson equations to a simple model, analytical solutions are given for the nonlinear response of a biased superlattice under sub-THz radiation. The frequency multiplication process leading to multiple harmonicgeneration is described. This hybrid approach leads to predictive simulations and may have important application for a new generation of devices where the superlattices are used as both sources and detectors and may be particular useful for high resolution transient spectroscopy [A.A. Yablokov et at, IEEE Transactions on THz Science and Technology 5, 845 (2015)].

  14. Nonlinear THz response of metallic armchair graphene nanoribbon superlattices

    Science.gov (United States)

    Wang, Yichao; Andersen, David R.

    2016-11-01

    We study the third order THz nonlinear response of metallic armchair graphene nanoribbon superlattices in the presence of an elliptically-polarized excitation field using the time dependent perturbation theory. For a one-dimensional Kronig-Penney potential of infinite length, the nonlinear response can be described perturbatively by a low energy \\mathbf{k}\\centerdot \\mathbf{p} N-photon coupling model. Remarkably, as shown by Burset et al the energy dispersion of the metallic band in the direction parallel to the superlattice wavevector is independent of the applied superlattice potential while the energy dispersion in the direction perpendicular to the superlattice wavevector depends strongly on the superlattice parameters. As a result, we predict novel behavior for the nonlinear response of single layer metallic acGNR superlattices to an applied elliptically-polarized electric field. Our work shows that the superlattice potential, periodicity, Fermi level, excitation field polarization state, and temperature all play a significant role in the resulting THz nonlinear conductances.

  15. Frequency-domain spectroscopy using high-power tunable THz-wave sources: towards THz sensing and detector sensitivity calibration

    Science.gov (United States)

    Takida, Yuma; Minamide, Hiroaki

    2017-05-01

    The development of reliable, high-power, frequency-tunable terahertz (THz)-wave sources is crucial for a wide variety of applications, such as spectroscopy, imaging, and sensing. In order to generate frequency-tunable THz waves at room temperature, one of the most promising methods is a wavelength conversion in nonlinear optical crystals. Here, we present our recent results on high-power, widely-tunable, frequency-agile THz-wave sources based on nonlinear parametric processes in MgO:LiNbO3 crystals. By changing the noncollinear phase-matching condition in MgO:LiNbO3, the tunability of sub-nanosecond-pumped injection-seeded THz-wave parametric generators (is-TPGs) covers the 3.65-octave frequency range from 0.37 THz up to 4.65 THz. The monochromatic THz-wave output from is-TPGs is greater than 10 kW peak power with the linewidth of approximately 3 GHz and the stability of 1%. These is-TPG systems are reliable and promising high-power tunable THz-wave sources for frequency-domain spectroscopic measurements towards THz sensing and detector sensitivity calibration.

  16. Corneal trephination with the femtosecond laser.

    Science.gov (United States)

    Meltendorf, Christian; Schroeter, Jan; Bug, Reinhold; Kohnen, Thomas; Deller, Thomas

    2006-10-01

    To evaluate the feasibility and cut quality of corneal trephination in human donor corneal tissue with the femtosecond laser. Twelve human corneoscleral discs were inserted in an artificial anterior chamber. After corneal thickness measurement and tonometry, the cornea was mounted on a femtosecond laser (FEMTEC; 20/10 Perfect Vision, Heidelberg, Germany) through a contact lens (patient interface). Trephination was performed with diameters of 7.0, 7.5, 8.0, and 8.5 mm in 3 corneas each. The corneal button was removed from the corneoscleral disc in 2 of the 3 corneas in each case. The cut was not manipulated in the remaining corneas to enable histologic detection of possible tissue bridges. The cut edges were macroscopically and light-microscopically examined for quality. Corneal buttons and corneoscleral discs could be separated by blunt dissection in all cases. Tissue bridges were more common in thicker edematous corneas than in thinner ones. Both the macro- and microscopic examination disclosed smooth rectilinear cut margins with a perpendicular cut edge. This feasibility study shows that the femtosecond laser enables sufficient trephination of human donor corneas.

  17. Plasmon-enhanced terahertz emission in self-assembled quantum dots by femtosecond pulses

    Energy Technology Data Exchange (ETDEWEB)

    Carreño, F., E-mail: ferpo@fis.ucm.es; Antón, M. A., E-mail: antonm@fis.ucm.es; Melle, Sonia, E-mail: smelle@fis.ucm.es; Calderón, Oscar G., E-mail: oscargc@fis.ucm.es; Cabrera-Granado, E., E-mail: ecabrera@fis.ucm.es [Facultad de Óptica y Optometría, Universidad Complutense de Madrid, C/ Arcos de Jalón 118, 28037 Madrid (Spain); Cox, Joel, E-mail: jcox27@uwo.ca; Singh, Mahi R., E-mail: msingh@uwo.ca [Department of Physics and Astronomy, The University of Western Ontario, London N6A 3K7 (Canada); Egatz-Gómez, A., E-mail: Ana.Egatz-Gomez.1@nd.edu [Department of Chemical and Biomolecular Engineering, University of Notre Dame, South Bend, Indiana 46556 (United States)

    2014-02-14

    A scheme for terahertz (THz) generation from intraband transition in a self-assembled quantum dot (QD) molecule coupled to a metallic nanoparticle (MNP) is analyzed. The QD structure is described as a three-level atom-like system using the density matrix formalism. The MNP with spherical geometry is considered in the quasistatic approximation. A femtosecond laser pulse creates a coherent superposition of two subbands in the quantum dots and produces localized surface plasmons in the nanoparticle which act back upon the QD molecule via dipole-dipole interaction. As a result, coherent THz radiation with a frequency corresponding to the interlevel spacing can be obtained, which is strongly modified by the presence of the MNP. The peak value of the terahertz signal is analyzed as a function of nanoparticle's size, the MNP to QD distance, and the area of the applied laser field. In addition, we theoretically demonstrate that the terahertz pulse generation can be effectively controlled by making use of a train of femtosecond laser pulses. We show that by a proper choice of the parameters characterizing the pulse train a huge enhancement of the terahertz signal is obtained.

  18. Broadband terahertz anti-reflective structure fabricated by femtosecond laser drilling technique

    Science.gov (United States)

    Zhang, Yibin; Yuan, Minghui; Chen, Lin; Cai, Bin; Yang, Rui; Zhu, Yiming

    2016-02-01

    We fabricated several reverse conical holes on high-resistivity silicon substrate with different power and pulse number of femtosecond laser, and investigated their patterns and features by using scanning electron microscope (SEM). Then, we chose one of the experimental parameters prepared a reverse conical anti-reflection structure sample with period of 90 μm. Terahertz Time-domain Spectroscopy (THz-TDS) was used to test its properties. Compared with the nonstructural high-resistivity silicon, the transmission of structural high-resistivity silicon increases by the maximum of 14% in the range 0.32-1.30 THz. Furthermore, we simulated the sample by finite integral method (FIM). The simulated results show good consistency with experimental results. The transmission effect of the reverse conical holes were optimized via simulation. Results show that the related transmission effect can be improved by increasing the pulse numbers and decreasing the spot size of the femtosecond laser. The different transmission window can also be tuned by changing the reverse conical structure of different periods.

  19. THz and above THz electron or hole oscillations in DNA dimers and trimers

    Energy Technology Data Exchange (ETDEWEB)

    Lambropoulos, Konstantinos; Kaklamanis, Konstantinos; Georgiadis, Georgios; Simserides, Constantinos [National and Kapodistrian University of Athens, Faculty of Physics, Department of Solid State Physics, Zografos (Greece)

    2014-07-15

    A non conventional source or receiver of THz and above THz electromagnetic radiation is proposed. Specifically, electron or hole oscillations in DNA dimers (two interacting DNA base-pairs or monomers) are predicted, with frequency in the range f ∼ 0.25-100 THz (period T ∼ 10-4000 fs) i.e. potentially absorbing or emitting electromagnetic radiation mainly in the mid- and far-infrared with wavelengths ∼ 3-1200 μm. The efficiency of charge transfer between the two monomers which make up the dimer is described with the maximum transfer percentage p and the pure maximum transfer rate pf. For dimers made of identical monomers p = 1, but for dimers made of different monomers p < 1. The investigation is extended to DNA trimers (three interacting DNA base-pairs or monomers). For trimers made of identical monomers the carrier oscillates periodically with f ∼ 0.5-33 THz (period T ∼ 30-2000 fs); for 0 times crosswise purines p = 1, for 1 or 2 times crosswise purines p < 1. For trimers made of different monomers the carrier movement may be non periodic. Generally, increasing the number of monomers above three, the system becomes more complex and periodicity is lost; even for the simplest tetramer the carrier movement is not periodic. (copyright 2014 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Femtosecond laser induced microripple on PDMS surface

    Institute of Scientific and Technical Information of China (English)

    Jin Xie; Changhe Zhou; Wei Wang; Tengfei Wu

    2009-01-01

    laser pulses and the subsequent cool-down solidification of the melting PDMS along with the movement of the femtosecond laser spot. This result will be helpful to understand the interaction between the femtosecond laser and the polymer.

  1. Silicon Micromachined Microlens Array for THz Antennas

    Science.gov (United States)

    Lee, Choonsup; Chattopadhyay, Goutam; Mehdi, IImran; Gill, John J.; Jung-Kubiak, Cecile D.; Llombart, Nuria

    2013-01-01

    5 5 silicon microlens array was developed using a silicon micromachining technique for a silicon-based THz antenna array. The feature of the silicon micromachining technique enables one to microfabricate an unlimited number of microlens arrays at one time with good uniformity on a silicon wafer. This technique will resolve one of the key issues in building a THz camera, which is to integrate antennas in a detector array. The conventional approach of building single-pixel receivers and stacking them to form a multi-pixel receiver is not suited at THz because a single-pixel receiver already has difficulty fitting into mass, volume, and power budgets, especially in space applications. In this proposed technique, one has controllability on both diameter and curvature of a silicon microlens. First of all, the diameter of microlens depends on how thick photoresist one could coat and pattern. So far, the diameter of a 6- mm photoresist microlens with 400 m in height has been successfully microfabricated. Based on current researchers experiences, a diameter larger than 1-cm photoresist microlens array would be feasible. In order to control the curvature of the microlens, the following process variables could be used: 1. Amount of photoresist: It determines the curvature of the photoresist microlens. Since the photoresist lens is transferred onto the silicon substrate, it will directly control the curvature of the silicon microlens. 2. Etching selectivity between photoresist and silicon: The photoresist microlens is formed by thermal reflow. In order to transfer the exact photoresist curvature onto silicon, there needs to be etching selectivity of 1:1 between silicon and photoresist. However, by varying the etching selectivity, one could control the curvature of the silicon microlens. The figure shows the microfabricated silicon microlens 5 x5 array. The diameter of the microlens located in the center is about 2.5 mm. The measured 3-D profile of the microlens surface has a

  2. Ultrafast graphene-based broadband THz detector

    CERN Document Server

    Mittendorff, Martin; Kamann, Josef; Eroms, Jonathan; Weiss, Dieter; Schneider, Harald; Helm, Manfred

    2013-01-01

    We present an ultrafast graphene-based detector, working in the THz range at room temperature. A logarithmic-periodic antenna is coupled to a graphene flake that is produced by exfoliation on SiO2. The detector was characterized with the free-electron laser FELBE for wavelengths from 8 um to 220 um. The detector rise time is 50 ps in the wavelength range from 30 um to 220 um. Autocorrelation measurements exploiting the nonlinear photocurrent response at high intensities reveal an intrinsic response time below 10 ps. This detector has a high potential for characterizing temporal overlaps, e. g. in two-color pump-probe experiments.

  3. Femtosecond Twisting and Coherent Vibrational Motion in the Excited State of Tetraphenylethylene

    NARCIS (Netherlands)

    Lenderink, E; Duppen, K.; Wiersma, D. A.

    1995-01-01

    The initial dynamics after excitation to the S-1 state of tetraphenylethylene is studied using femtosecond pump-probe spectroscopy. From the rapid spectral changes during the first few hundred femtoseconds, we conclude that a fast ethylenic twisting motion occurs in the excited state within this tim

  4. Photoinduced absorption of THz radiation in semi-insulating GaAs crystal

    Science.gov (United States)

    Kurdyubov, A. S.; Trifonov, A. V.; Gerlovin, I. Ya.; Ignatiev, I. V.; Kavokin, A. V.

    2017-07-01

    The influence of optical illumination on transmission of THz radiation through a bulk crystal of semi-insulating GaAs is experimentally studied. It is established that, without additional illumination, absorption of electromagnetic waves with a frequency of about 1 THz in the studied crystal is almost absent. Optical illumination in the spectral range of fundamental absorption of the crystal does not affect the transmission of THz waves. At the same time, if the illumination photon energy is a little below the edge of fundamental absorption, i.e., actually in the transparency region, the transmission of THz radiation drops sharply. At liquid helium temperature, the maximum effect is achieved for the energy of optical photons lower by approximately 30 meV than the crystal band gap. Further shift of the illumination toward lower photon energies is accompanied by almost complete recovery of the transmission. With increasing sample temperature, the spectral range of efficient action of the illumination shifts together with the edge of fundamental absorption toward lower photon energies.

  5. A scanned beam THz imaging system for medical applications

    Science.gov (United States)

    Taylor, Zachary D.; Li, Wenzao; Suen, Jon; Tewari, Priyamvada; Bennett, David; Bajwa, Neha; Brown, Elliott; Culjat, Martin; Grundfest, Warren; Singh, Rahul

    2011-10-01

    THz medical imaging has been a topic of increased interest recently due largely to improvements in source and detector technology and the identification of suitable applications. One aspect of THz medical imaging research not often adequately addressed is pixel acquisition rate and phenomenology. The majority of active THz imaging systems use translation stages to raster scan a sample beneath a fixed THz beam. While these techniques have produced high resolution images of characterization targets and animal models they do not scale well to human imaging where clinicians are unwilling to place patients on large translation stages. This paper presents a scanned beam THz imaging system that can acquire a 1 cm2 area with 1 mm2 pixels and a per-pixel SNR of 40 dB in less than 5 seconds. The system translates a focused THz beam across a stationary target using a spinning polygonal mirror and HDPE objective lens. The illumination is centered at 525 GHz with ~ 125 GHz of response normalized bandwidth and the component layout is designed to optically co-locate the stationary source and detector ensuring normal incidence across a 50 mm × 50 mm field of view at standoff of 190 mm. Component characterization and images of a test target are presented. These results are some of the first ever reported for a short standoff, high resolution, scanned beam THz imaging system and represent an important step forward for practical integration of THz medical imaging where fast image acquisition times and stationary targets (patients) are requisite.

  6. THz Generation Using Fluxon Dynamics in High Temperature Superconductors

    DEFF Research Database (Denmark)

    Pedersen, Niels Falsig; Madsen, S.

    2009-01-01

    We consider THz emission due to fluxon dynamics in a stack of inductively coupled long Josephson junctions connected electrically to a resonant cavity. By comparing to experiments on Josephson junction parametric amplifiers we consider the role of a negative resistance in connection with THz emis...

  7. Transmission of THz wave by liquid dielectric waveguide

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The absorption and dispersion of several non-polar organic solvents from 0.2 to 2.5 THz are measured with the method of time-domain spectroscopy.Based on the result,we believe that liquid paraffin might be a proper choice for liquid dielectric waveguide.Transmitting performance of THz liquid dielectric waveguide at 98 GHz is tested.

  8. The OPTHER Project: Progress toward the THz Amplifier

    DEFF Research Database (Denmark)

    Paoloni, C; Brunetti, F; Di Carlo, A

    2011-01-01

    This paper describes the status of the OPTHER (OPtically driven TeraHertz AmplifiERs) project and progress toward the THz amplifier realization. This project represents a considerable advancement in the field of high frequency amplification. The design and realization of a THz amplifier within th...

  9. THz and infrared metamaterial polarization converter with tunable ellipticity

    DEFF Research Database (Denmark)

    Markovich, D. L.; Andryieuski, Andrei; Lavrinenko, Andrei

    2012-01-01

    In this contribution we present the metamaterial based polarization converter from linear to elliptical polarization with a desired ellipticity and ellipse orientation. We show two designs with the conversion efficiency 50% for the frequencies around 1 THz and 193 THz. The proposed device is real...

  10. THz transceiver characterization : LDRD project 139363 final report.

    Energy Technology Data Exchange (ETDEWEB)

    Nordquist, Christopher Daniel; Wanke, Michael Clement; Cich, Michael Joseph; Reno, John Louis; Fuller, Charles T.; Wendt, Joel Robert; Lee, Mark; Grine, Albert D.

    2009-09-01

    LDRD Project 139363 supported experiments to quantify the performance characteristics of monolithically integrated Schottky diode + quantum cascade laser (QCL) heterodyne mixers at terahertz (THz) frequencies. These integrated mixers are the first all-semiconductor THz devices to successfully incorporate a rectifying diode directly into the optical waveguide of a QCL, obviating the conventional optical coupling between a THz local oscillator and rectifier in a heterodyne mixer system. This integrated mixer was shown to function as a true heterodyne receiver of an externally received THz signal, a breakthrough which may lead to more widespread acceptance of this new THz technology paradigm. In addition, questions about QCL mode shifting in response to temperature, bias, and external feedback, and to what extent internal frequency locking can improve stability have been answered under this project.

  11. Study of Third-Order Optical Nonlinearities of Se-Sn (Bi,Te) Quaternary Chalcogenide Thin Films Using Ti: Sapphire Laser in Femtosecond Regime

    Science.gov (United States)

    Yadav, Preeti; Sharma, Ambika

    2017-01-01

    The objective of the present research work is to study the nonlinear optical properties of quaternary Se-Sn (Bi,Te) chalcogenide thin films. A Z-scan technique utilizing 800 nm femtosecond laser source has been used for the determination of the nonlinear refractive index ( n 2), two-photon absorption coefficient ( β 2) and third-order susceptibility ( χ (3)). In the measurement of n 2, an aperture is placed in the far field before the detector (closed aperture), while for the measurement of β 2, entire transmitted light is collected by the detector without an aperture (open aperture). Self-focusing has been observed in closed aperture transmission spectra. The appearance of the peak after the valley in this spectrum reflects the positive nonlinear refractive index. The calculated value of n 2 of the studied thin films varies from 1.06 × 10-12 cm2/W to 0.88 × 10-12 cm2/W. The compound-dependent behavior of n 2 is explained in this paper. We have also compared the experimental values of n 2 with the theoretically determined values, other compounds of chalcogenide glass and pure silica. The n 2 of the investigated thin films is found to be 3200 times higher than pure silica. The results of the open aperture Z-scan revealed that the value of β 2 of the studied compound is in the order of 10-8 cm/W. The behavior of two-photon absorption is described by means of the optical band gap ( E g) of the studied compound. The variation in the figure-of-merit from 0.32 to 1.4 with varying Sn content is also reported in this paper. The higher value of nonlinearity makes this material advantageous for optical fibers, waveguides and optical limiting devices.

  12. Study of Third-Order Optical Nonlinearities of Se-Sn (Bi,Te) Quaternary Chalcogenide Thin Films Using Ti: Sapphire Laser in Femtosecond Regime

    Science.gov (United States)

    Yadav, Preeti; Sharma, Ambika

    2016-09-01

    The objective of the present research work is to study the nonlinear optical properties of quaternary Se-Sn (Bi,Te) chalcogenide thin films. A Z-scan technique utilizing 800 nm femtosecond laser source has been used for the determination of the nonlinear refractive index (n 2), two-photon absorption coefficient (β 2) and third-order susceptibility (χ (3)). In the measurement of n 2, an aperture is placed in the far field before the detector (closed aperture), while for the measurement of β 2, entire transmitted light is collected by the detector without an aperture (open aperture). Self-focusing has been observed in closed aperture transmission spectra. The appearance of the peak after the valley in this spectrum reflects the positive nonlinear refractive index. The calculated value of n 2 of the studied thin films varies from 1.06 × 10-12 cm2/W to 0.88 × 10-12 cm2/W. The compound-dependent behavior of n 2 is explained in this paper. We have also compared the experimental values of n 2 with the theoretically determined values, other compounds of chalcogenide glass and pure silica. The n 2 of the investigated thin films is found to be 3200 times higher than pure silica. The results of the open aperture Z-scan revealed that the value of β 2 of the studied compound is in the order of 10-8 cm/W. The behavior of two-photon absorption is described by means of the optical band gap (E g) of the studied compound. The variation in the figure-of-merit from 0.32 to 1.4 with varying Sn content is also reported in this paper. The higher value of nonlinearity makes this material advantageous for optical fibers, waveguides and optical limiting devices.

  13. Plasma-Wave Enhanced THz-Performance of a Nanometer Side-Gated Transistor

    Directory of Open Access Journals (Sweden)

    K. Y. Xu

    2014-07-01

    Full Text Available By using a two-dimensional-three-dimensional (2D-3D combined ensemble Monte Carlo (EMC model, the performance of a nanometer side-gated transistor is studied at terahertz (THz region. The transistor is based on a GaN/AlGaN heterosturcture at whose hetero-interface a two-dimensional electron gas (2DEG is formed. And the side-gate of the transistor is intentionally designed as an insulating trench with a 2DEG area in the center. Simulation results reveal that at low working frequency the performances of the transistor are almost frequency independent. However when the working frequency reaches THz region, obvious enhancements of the performances have been observed. The enhancements are accompanied by two peaks respectively at the frequency of about 4 THz and 6 THz. As such, the frequency-dependent performances become frequency nonmonotonic. Further analysis shows that the performance enhancements can be attributed to the excitations of 2D plasma waves in the side-gate which including a 2DEG area in its center.

  14. Benzothiazolium Single Crystals: A New Class of Nonlinear Optical Crystals with Efficient THz Wave Generation.

    Science.gov (United States)

    Lee, Seung-Heon; Lu, Jian; Lee, Seung-Jun; Han, Jae-Hyun; Jeong, Chan-Uk; Lee, Seung-Chul; Li, Xian; Jazbinšek, Mojca; Yoon, Woojin; Yun, Hoseop; Kang, Bong Joo; Rotermund, Fabian; Nelson, Keith A; Kwon, O-Pil

    2017-08-01

    Highly efficient nonlinear optical organic crystals are very attractive for various photonic applications including terahertz (THz) wave generation. Up to now, only two classes of ionic crystals based on either pyridinium or quinolinium with extremely large macroscopic optical nonlinearity have been developed. This study reports on a new class of organic nonlinear optical crystals introducing electron-accepting benzothiazolium, which exhibit higher electron-withdrawing strength than pyridinium and quinolinium in benchmark crystals. The benzothiazolium crystals consisting of new acentric core HMB (2-(4-hydroxy-3-methoxystyryl)-3-methylbenzo[d]thiazol-3-ium) exhibit extremely large macroscopic optical nonlinearity with optimal molecular ordering for maximizing the diagonal second-order nonlinearity. HMB-based single crystals prepared by simple cleaving method satisfy all required crystal characteristics for intense THz wave generation such as large crystal size with parallel surfaces, moderate thickness and high optical quality with large optical transparency range (580-1620 nm). Optical rectification of 35 fs pulses at the technologically very important wavelength of 800 nm in 0.26 mm thick HMB crystal leads to one order of magnitude higher THz wave generation efficiency with remarkably broader bandwidth compared to standard inorganic 0.5 mm thick ZnTe crystal. Therefore, newly developed HMB crystals introducing benzothiazolium with extremely large macroscopic optical nonlinearity are very promising materials for intense broadband THz wave generation and other nonlinear optical applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Assignment of the lowest-lying THz absorption signatures in biotin and lactose monohydrate by solid-state density functional theory

    Science.gov (United States)

    Allis, D. G.; Fedor, A. M.; Korter, T. M.; Bjarnason, J. E.; Brown, E. R.

    2007-06-01

    The narrow terahertz (THz) features in crystalline biotin and lactose monohydrate observed in recent experimental studies are considered by solid-state density functional theory (DFT) calculations. The lowest-frequency THz features in both solid-state biotin and lactose monohydrate are assigned to external hindered rotational modes and not to the lowest-frequency internal modes predicted from isolated-molecule calculations. The motions of the molecules associated with these narrow THz features and the interactions between molecules in the hydrogen-bonded networks of these molecular crystals are discussed, and comparisons are made to similar studies on molecular crystals not exhibiting strong intermolecular interactions.

  16. Femtosecond photography lessons

    Science.gov (United States)

    Fanchenko, S. D.

    1999-06-01

    Antic scientists, sailors, warriors, physician, etc. were perceiving the space by means of their eye vision system. Nowadays the same people use eyeglasses, telescopes, microscopes, image converters. All these devices fit the necessary magnification, intensification gain and image spectrum to the eyes. The human brain is processing the image data offered to him in a format pertaining to eyes. Hence, the cognition of images can be regarded as a direct measurement. As to the time scale converters, they turned out to be harder done as compared with the spatial scale converters. Hence, the development of the high-speed photography (HSP) continues for more than a hundred and fifty years. The recent pico- femtosecond HSP branch sprang up in 1949 at the Kurchatov Institute -- its cradle. All about the HSP had been advertised. Instead of reprinting what is already well known, it makes sense to emphasize some instructive lessons drawn from past experience. Also it is tempting to look a bit into the high-speed photography future.

  17. THz and Sub-THz Capabilities of a Table-Top Radiation Source Driven by an RF Thermionic Electron Gun

    Energy Technology Data Exchange (ETDEWEB)

    Smirnov, Alexei V.; Agustsson, R.; Boucher, S.; Campese, Tara; Chen, Y.C.; Hartzell, Josiah J.; Jocobson, B.T.; Murokh, A.; O' Shea, F.H.; Spranza, E.; Berg, W.; Borland, M.; Dooling, J. C.; Erwin, L.; Lindberg, R. R.; Pasky, S.J.; Sereno, N.; Sun, Y.; Zholents, A.

    2017-06-01

    Design features and experimental results are presented for a sub-mm wave source [1] based on APS RF thermionic electron gun. The setup includes compact alpha-magnet, quadrupoles, sub-mm-wave radiators, and THz optics. The sub-THz radiator is a planar, oversized structure with gratings. Source upgrade for generation frequencies above 1 THz is discussed. The THz radiator will use a short-period undulator having 1 T field amplitude, ~20 cm length, and integrated with a low-loss oversized waveguide. Both radiators are integrated with a miniature horn antenna and a small ~90°-degree in-vacuum bending magnet. The electron beamline is designed to operate different modes including conversion to a flat beam interacting efficiently with the radiator. The source can be used for cancer diagnostics, surface defectoscopy, and non-destructive testing. Sub-THz experiment demonstrated a good potential of a robust, table-top system for generation of a narrow bandwidth THz radiation. This setup can be considered as a prototype of a compact, laser-free, flexible source capable of generation of long trains of Sub-THz and THz pulses with repetition rates not available with laser-driven sources.

  18. Femtosecond laser ablation of enamel

    Science.gov (United States)

    Le, Quang-Tri; Bertrand, Caroline; Vilar, Rui

    2016-06-01

    The surface topographical, compositional, and structural modifications induced in human enamel by femtosecond laser ablation is studied. The laser treatments were performed using a Yb:KYW chirped-pulse-regenerative amplification laser system (560 fs and 1030 nm) and fluences up to 14 J/cm2. The ablation surfaces were studied by scanning electron microscopy, grazing incidence x-ray diffraction, and micro-Raman spectroscopy. Regardless of the fluence, the ablation surfaces were covered by a layer of resolidified material, indicating that ablation is accompanied by melting of hydroxyapatite. This layer presented pores and exploded gas bubbles, created by the release of gaseous decomposition products of hydroxyapatite (CO2 and H2O) within the liquid phase. In the specimen treated with 1-kHz repetition frequency and 14 J/cm2, thickness of the resolidified material is in the range of 300 to 900 nm. The micro-Raman analysis revealed that the resolidified material contains amorphous calcium phosphate, while grazing incidence x-ray diffraction analysis allowed detecting traces of a calcium phosphate other than hydroxyapatite, probably β-tricalcium phosphate Ca3), at the surface of this specimen. The present results show that the ablation of enamel involves melting of enamel's hydroxyapatite, but the thickness of the altered layer is very small and thermal damage of the remaining material is negligible.

  19. Sensing with THz metamaterial absorbers

    CERN Document Server

    Cong, Longqing

    2014-01-01

    Metamaterial perfect absorbers from microwaves to optical part of the electromagnetic spectrum has been intensely studied for its ability to absorb electromagnetic radiation. Perfect absorption of light by metamaterials have opened up new opportunities for application oriented functionalities such as efficient sensors and emitters. We present an absorber based sensing scheme at the terahertz frequencies and discuss optimized designs to achieve high frequency and amplitude sensitivities. The major advantage of a perfect metamaterial absorber as a sensor is the sensitive shift in the absorber resonance frequency along with the sharp change in the amplitude of the resonance due to strong interaction of the analyte with the electric and the magnetic fields at resonant perfect absorption frequency. We compare the sensing performance of the perfect metamaterial absorber with its complementary structural design and planar metasurface with identical structure. The best FoM values obtained for the absorber sensor here...

  20. Femtosecond optomagnetism in dielectric antiferromagnets

    Science.gov (United States)

    Bossini, D.; Rasing, Th

    2017-02-01

    Optical femtosecond manipulation of magnetic order is attractive for the development of new concepts for ultrafast magnetic recording. Theoretical and experimental investigations in this research area aim at establishing a physical understanding of magnetic media in light-induced non-equilibrium states. Such a quest requires one to adjust the theory of magnetism, since the thermodynamical concepts of elementary excitations and spin alignment determined by the exchange interaction are not applicable on the femtosecond time-scale after the photo-excitation. Here we report some key milestones concerning the femtosecond optical control of spins in dielectric antiferromagnets, whose spin dynamics is by nature faster than that of ferromagnets and can be triggered even without any laser heating. The recent progress of the opto-magnetic effect in the sub-wavelength regime makes this exciting research area even more promising, in terms of both fundamental breakthroughs and technological perspectives.

  1. Mode analysis and design of 0.3-THz Clinotron

    Science.gov (United States)

    Li, Shuang; Wang, Jian-Guo; Wang, Guang-Qiang; Zeng, Peng; Wang, Dong-Yang

    2016-10-01

    To develop a high-power continuous-wave terahertz source, a Clinotron operating at 0.3 THz is investigated. Based on the analyses of field distribution and coupling impedance, the dispersion characteristic of a rectangular resonator is preliminarily studied. The effective way to select fundamental mode to interact with the electron beam is especially studied. Finally, the structure is optimized by particle-in-cell simulation, and the problems of manufacture tolerance, current density threshold, and heat dissipation during Clinotron’s operation are also discussed. The optimum device can work with a good performance under the conditions of 8 kV and 60 mA. With the generation of signal frequency at 315.89 GHz and output power at 12 W on average, this device shows great prospects in the application of terahertz waves. Project supported by the National Natural Science Foundation of China (Grant No. 61231003).

  2. Tight focusing of femtosecond elliptically polarised vortex light pulses

    Institute of Scientific and Technical Information of China (English)

    Hua Li-Min; Chen Bao-Suan; Chen Zi-Yang; Pu Ji-Xiong

    2011-01-01

    This paper studies the tight focusing properties of femtosecond elliptically polarised vortex light pulses. Based on Richards-Wolf vectorial diffraction integral, the expressions for the electric field, the velocity of the femtosecond light pulse and the total angular momentum of focused pluses are derived. The numerical calculations are also given to illustrate the intensity distribution, phase contour, the group velocity variation and the total angular momentum near the focus. It finds that near the focus the femtosecond elliptically polarised vortex light pulse can travel at various group speeds, that is, slower or faster than light speed in vacuum, depending on the numerical aperture of the focusing objective system. Moreover, it also studies the influence of the numerical aperture of the focusing objective and the time duration of the elliptically polarised vortex light pulse on the total angular momentum distribution in the focused field.

  3. Seeing Beyond the Painting Surface with Terahertz Time-Domain Imaging (THz-TDI): a signal separation method for extracting images of buried individual layers in paintings

    DEFF Research Database (Denmark)

    Filtenborg, Troels Folke; Skou-Hansen, Jakob; Koch Dandolo, Corinna Ludovica

    2015-01-01

    In this study, the 18C easel painting The Dying Messalina and her Mother, by Nicolai Abildgaard (Statens Museum for Kunst collection, Copenhagen, Denmark), has been investigated by Terahertz Time-Domain Imaging (THz-TDI) in reflection set-up. Despite the validity of traditional deconvolution...... and denoising methods used to resolve temporal features of THz reflected signals, they result impractical if applied to large images analysis. Therefore, we presented a simple, fast and effective method to separate single THz pulses of interest from the entire signal recorded at each spatial coordinate...

  4. Ultrafast forward and backward electron transfer dynamics of coumarin 337 in hydrogen-bonded anilines as studied with femtosecond UV-pump/IR-probe spectroscopy.

    Science.gov (United States)

    Ghosh, Hirendra N; Verma, Sandeep; Nibbering, Erik T J

    2011-02-10

    Femtosecond infrared spectroscopy is used to study both forward and backward electron transfer (ET) dynamics between coumarin 337 (C337) and the aromatic amine solvents aniline (AN), N-methylaniline (MAN), and N,N-dimethylaniline (DMAN), where all the aniline solvents can donate an electron but only AN and MAN can form hydrogen bonds with C337. The formation of a hydrogen bond with AN and MAN is confirmed with steady state FT-IR spectroscopy, where the C═O stretching vibration is a direct marker mode for hydrogen bond formation. Transient IR absorption measurements in all solvents show an absorption band at 2166 cm(-1), which has been attributed to the C≡N stretching vibration of the C337 radical anion formed after ET. Forward electron transfer dynamics is found to be biexponential with time constants τ(ET)(1) = 500 fs, τ(ET)(2) = 7 ps in all solvents. Despite the presence of hydrogen bonds of C337 with the solvents AN and MAN, no effect has been found on the forward electron transfer step. Because of the absence of an H/D isotope effect on the forward electron transfer reaction of C337 in AN, hydrogen bonds are understood to play a minor role in mediating electron transfer. In contrast, direct π-orbital overlap between C337 and the aromatic amine solvents causes ultrafast forward electron transfer dynamics. Backward electron transfer dynamics, in contrast, is dependent on the solvent used. Standard Marcus theory explains the observed backward electron transfer rates.

  5. Reversible femtosecond laser-assisted myopia correction: a non-human primate study of lenticule re-implantation after refractive lenticule extraction.

    Directory of Open Access Journals (Sweden)

    Andri K Riau

    Full Text Available LASIK (laser-assisted in situ keratomileusis is a common laser refractive procedure for myopia and astigmatism, involving permanent removal of anterior corneal stromal tissue by excimer ablation beneath a hinged flap. Correction of refractive error is achieved by the resulting change in the curvature of the cornea and is limited by central corneal thickness, as a thin residual stromal bed may result in biomechanical instability of the cornea. A recently developed alternative to LASIK called Refractive Lenticule Extraction (ReLEx utilizes solely a femtosecond laser (FSL to incise an intrastromal refractive lenticule (RL, which results in reshaping the corneal curvature and correcting the myopia and/or astigmatism. As the RL is extracted intact in the ReLEx, we hypothesized that it could be cryopreserved and re-implanted at a later date to restore corneal stromal volume, in the event of keratectasia, making ReLEx a potentially reversible procedure, unlike LASIK. In this study, we re-implanted cryopreserved RLs in a non-human primate model of ReLEx. Mild intrastromal haze, noted during the first 2 weeks after re-implantation, subsided after 8 weeks. Refractive parameters including corneal thickness, anterior curvature and refractive error indices were restored to near pre-operative values after the re-implantation. Immunohistochemistry revealed no myofibroblast formation or abnormal collagen type I expression after 8 weeks, and a significant attenuation of fibronectin and tenascin expression from week 8 to 16 after re-implantation. In addition, keratocyte re-population could be found along the implanted RL interfaces. Our findings suggest that RL cryopreservation and re-implantation after ReLEx appears feasible, suggesting the possibility of potential reversibility of the procedure, and possible future uses of RLs in treating other corneal disorders and refractive errors.

  6. Comprehensive Monte-Carlo simulator for optimization of imaging parameters for high sensitivity detection of skin cancer at the THz

    Science.gov (United States)

    Ney, Michael; Abdulhalim, Ibrahim

    2016-03-01

    Skin cancer detection at its early stages has been the focus of a large number of experimental and theoretical studies during the past decades. Among these studies two prominent approaches presenting high potential are reflectometric sensing at the THz wavelengths region and polarimetric imaging techniques in the visible wavelengths. While THz radiation contrast agent and source of sensitivity to cancer related tissue alterations was considered to be mainly the elevated water content in the cancerous tissue, the polarimetric approach has been verified to enable cancerous tissue differentiation based on cancer induced structural alterations to the tissue. Combining THz with the polarimetric approach, which is considered in this study, is examined in order to enable higher detection sensitivity than previously pure reflectometric THz measurements. For this, a comprehensive MC simulation of radiative transfer in a complex skin tissue model fitted for the THz domain that considers the skin`s stratified structure, tissue material optical dispersion modeling, surface roughness, scatterers, and substructure organelles has been developed. Additionally, a narrow beam Mueller matrix differential analysis technique is suggested for assessing skin cancer induced changes in the polarimetric image, enabling the tissue model and MC simulation to be utilized for determining the imaging parameters resulting in maximal detection sensitivity.

  7. Ultrafast spintronics roadmap: from femtosecond spin current pulses to terahertz non-uniform spin dynamics via nano-confined spin transfer torques (Conference Presentation)

    Science.gov (United States)

    Melnikov, Alexey; Razdolski, Ilya; Alekhin, Alexandr; Ilin, Nikita; Meyburg, Jan; Diesing, Detlef; Roddatis, Vladimir; Rungger, Ivan; Stamenova, Maria; Sanvito, Stefano; Bovensiepen, Uwe

    2016-10-01

    Further development of spintronics requires miniaturization and reduction of characteristic timescales of spin dynamics combining the nanometer spatial and femtosecond temporal ranges. These demands shift the focus of interest towards the fundamental open question of the interaction of femtosecond spin current (SC) pulses with a ferromagnet (FM). The spatio-temporal properties of the spin transfer torque (STT) exerted by ultrashort SC pulses on the FM open the time domain for studying STT fingerprint on spatially non-uniform magnetization dynamics. Using the sensitivity of magneto-induced second harmonic generation to SC, we develop technique for SC monitoring. With 20 fs resolution, we demonstrate the generation of 250 fs-long SC pulses in Fe/Au/Fe/MgO(001) structures. Their temporal profile indicates (i) nearly-ballistic hot electron transport in Au and (ii) that the pulse duration is primarily determined by the thermalization time of laser-excited hot carriers in Fe. Together with strongly spin-dependent Fe/Au interface transmission calculated for these carriers, this suggests the non-thermal spin-dependent Seebeck effect dominating the generation of ultrashort SC pulses. The analysis of SC transmission/reflection at the Au/Fe interface shows that hot electron spins orthogonal to the Fe magnetization rotate gaining huge parallel (anti-parallel) projection in transmitted (reflected) SC. This is accompanied by a STT-induced perturbation of the magnetization localized at the interface, which excites the inhomogeneous high-frequency spin dynamics in the FM. Time-resolved magneto-optical studies reveal the excitation of several standing spin wave modes in the Fe film with their spectrum extending up to 0.6 THz and indicating the STT spatial confinement to 2 nm.

  8. Femtosecond laser-assisted cataract surgery: A current review

    Directory of Open Access Journals (Sweden)

    Majid Moshirfar

    2011-01-01

    Full Text Available To evaluate the safety, efficacy, advantages, and limitations of femtosecond laser-assisted cataract surgery through a review of the literature. A PubMed search was conducted using topic-appropriate keywords to screen and select articles. Initial research has shown appropriate safety and efficacy of femtosecond laser-assisted cataract surgery, with improvements in anterior capsulotomy, phacofragmentation, and corneal incision. Limitations of these studies include small sample size and short-term follow-up. Cost-benefit analysis has not yet been addressed. Preliminary data for femtosecond laser-assisted cataract surgery shows appropriate safety and efficacy, and possible advantage over conventional cataract surgery. Questions to eventually be answered include comparisons of long-term postoperative complication rates-including infection and visual outcomes-and analysis of contraindications and financial feasibility.

  9. Large amplitude femtosecond electron dynamics in metal clusters

    CERN Document Server

    Daligault, J

    2003-01-01

    We present a theoretical model that allows us to study linear and non-linear aspects of the femtosecond electron dynamics in metal clusters. The theoretical approach consists in the classical limit of the time-dependent Kohn-Sham equations. The electrons are described by a phase-space distribution function which satisfies a Vlasov-like equation while the ions are treated classically. This allows simulations for clusters containing several hundreds of atoms and extending up to several hundreds of femtoseconds during which the description conserves the fermionic character of the electron distribution. This semi-quantal approach compares very well with the purely quantal treatment. As an application of this approach, we show the prominent role of the electron dynamics during and after the interaction with an intense femtosecond laser pulse.

  10. Spiral Antenna-Coupled Microbridge Structures for THz Application.

    Science.gov (United States)

    Gou, Jun; Zhang, Tian; Wang, Jun; Jiang, Yadong

    2017-12-01

    Bolometer sensor is a good candidate for THz imaging due to its compact system, low cost, and wideband operation. Based on infrared microbolometer structures, two kinds of antenna-coupled microbridge structures are proposed with different spiral antennas: spiral antenna on support layer and spiral antenna with extended legs. Aiming at applications in detection and imaging, simulations are carried out mainly for optimized absorption at 2.52 THz, which is the radiation frequency of far-infrared CO2 lasers. The effects of rotation angle, line width, and spacing of the spiral antenna on THz wave absorption of microbridge structures are discussed. Spiral antenna, with extended legs, is a good solution for high absorption rate at low absorption frequency and can be used as electrode lead simultaneously for simplified manufacturing process. A spiral antenna-coupled microbridge structure with an absorption rate of more than 75% at 2.52 THz is achieved by optimizing the structure parameters. This research demonstrates the use of different spiral antennas for enhanced and tunable THz absorption of microbridge structures and provides an effective way to fabricate THz microbolometer detectors with great potential in the application of real-time THz imaging.

  11. Femtosecond Optical Parametric Amplifier for Petawatt Nd:Glass Lasers

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiao-Min; QIAN Lie-Jia; YUAN Peng; LUO Hang; ZHU He-Yuan; ZHU Qi-Hua; WEI Xiao-Feng; FAN Dian-Yuan

    2006-01-01

    @@ We study a femtosecond Ti:sapphire laser pumped optical parametric amplifier (OPA) at 1053nm. The OPA generates stable signal pulses with duration smaller than 100 fs, wavelength drift smaller than 0.5nm, and pulse-to-pulse fluctuation of about ±4%, by employing an external seeder. In a terawatt laser pumped large-aperture LiNbO3 OPA, pulse energy at signal has been scaled up to 4mJ. This m J-class femtosecond OPA at 1053nm presents a feasible alternative to optical parametric chirped-pulse amplification, and is ready to be applied to petawatt lasers.

  12. The Prospects of Ultra-Broadband THz Wireless Communications

    DEFF Research Database (Denmark)

    Yu, Xianbin; Chen, Ying; Galili, Michael;

    2014-01-01

    Wireless communications have entered into a path towards Terabit era, to accommodate the increasing demands on fast wireless access, e.g. huge data file transferring and fast mobile data access. Terahertz (THz) technology is considered feasible to carry ultrafast data signals, as it offers up...... to a few THz bandwidths. This paper overviews the prospects of Tbit/s wireless data rate and their potential applications. Technically, this talk reviews the key technologies and challenges to achieve an ultrafast wireless system operating in the THz frequency band, from viewpoint of communication...

  13. Two-Dimensional Fractal Metamaterials for Applications in THz

    DEFF Research Database (Denmark)

    Malureanu, Radu; Jepsen, Peter Uhd; Zalkovskij, Maksim

    2011-01-01

    The concept of metamaterials (MTMs) is acknowledged for providing new horizons for controlling electromagnetic radiations thus their use in frequency ranges otherwise difficult to manage (e.g. THz radiation) broadens our possibility to better understand our world as well as opens the path for new...... frequency range as well as a clear differentiation between one polarisation and another. Based on theoretical predictions we fabricated and measured a fractal based THz metamaterial that shows more than 60% field transmission at around 1 THz for TE polarized light while the TM waves have almost 80% field...

  14. Reconfigurable THz Plasmonic Antenna Concept Using a Graphene Stack

    CERN Document Server

    Tamagnone, Michele; Mosig, Juan Ramon; Perruisseau-Carrier, Julien

    2012-01-01

    The concept and analysis of a Terahertz (THz) frequency-reconfigurable antenna using graphene are presented. The antenna exploits dipole-like plasmonic resonances that can be frequency-tuned on large range via the electric field effect in a graphene stack. In addition to efficient dynamic control, the proposed approach allows high miniaturization and good direct matching with continuous wave THz sources. A qualitative model is used to explain the excellent impedance stability under reconfiguration. These initial results are very promising for future all-graphene THz transceivers and sensors. Keywords: Reconfigurable antenna, Graphene, Plasmons, Terahertz, frequency-tuning.

  15. THz-Pulse-Induced Selective Catalytic CO Oxidation on Ru

    Science.gov (United States)

    LaRue, Jerry L.; Katayama, Tetsuo; Lindenberg, Aaron; Fisher, Alan S.; Ã-ström, Henrik; Nilsson, Anders; Ogasawara, Hirohito

    2015-07-01

    We demonstrate the use of intense, quasi-half-cycle THz pulses, with an associated electric field component comparable to intramolecular electric fields, to direct the reaction coordinate of a chemical reaction by stimulating the nuclear motions of the reactants. Using a strong electric field from a THz pulse generated via coherent transition radiation from an ultrashort electron bunch, we present evidence that CO oxidation on Ru(0001) is selectively induced, while not promoting the thermally induced CO desorption process. The reaction is initiated by the motion of the O atoms on the surface driven by the electric field component of the THz pulse, rather than thermal heating of the surface.

  16. Optically-electrically pumped THz source

    Science.gov (United States)

    Haji-Saeed, Bahareh; Khoury, Jed; Buchwald, Walter; Woods, Charles; Wentzell, Sandra; Krejca, Brian; Kierstead, John

    2010-08-01

    In this paper, we propose a design for a widely tunable solid-state optically and electrically pumped THz source based on the Smith-Purcell free-electron laser. Our design consists of a thin dielectric layer sandwiched between an upper corrugated structure and a lower layer of thin metal, semiconductor, or high electron mobility material. The lower layer is for current streaming, which replaces the electron beam in the Smith-Purcell free-electron laser design. The upper layer consists of two micro-gratings for optical pumping, and a nano-grating to couple with electrical pumping in the lower layer. The optically generated surface plasmon waves from the upper layer and the electrically induced surface plasmon waves from the lower layer are then coupled. Emission enhancement occurs when the plasmonic waves in both layers are resonantly coupled.

  17. Infrared and THz spectroscopy of nanostructured dielectrics

    Directory of Open Access Journals (Sweden)

    Jan Petzelt

    2009-09-01

    Full Text Available Results achieved using the infrared/THz spectroscopy of various inhomogeneous dielectrics in the Department of Dielectrics, Institute of Physics, Prague, during the last decade are briefly reviewed. The discussion concerns high-permittivity ceramics with inevitable low-permittivity dead layers along the grain boundaries, relaxor ferroelectrics with highly anisotropic polar nano-regions, classical matrix-type composites, core-shell composites, filled nanoporous glasses, polycrystalline and epitaxial thin films, heterostructures and superlattices on dielectric substrates. The analysis using models based on the effective medium approach is discussed. The importance of depolarizing field and of the percolation of components on the effective ac dielectric response and the excitations contributing to it are emphasized.

  18. Paper on Designing Costless THz Paper Optics

    Directory of Open Access Journals (Sweden)

    A. Siemion

    2016-01-01

    Full Text Available Designing diffractive optical elements is crucial for efficient development of THz techniques. Here, we consider paper structures and we analyze their advantages and disadvantages in fast prototyping. The discussion about using material parameters like refractive index and absorption coefficient in designing diffractive optical elements is shown. We analyze the influence of phase step mismatch, of attenuation of real structure, and of nonuniform illumination on the efficiency of the structure. All these features result in worsening of the diffraction efficiency but they do not seem to have such significant influence as shadow effect introduced by fast varying zones. Diffractive elements can be designed with very good accordance with experimental results which makes them ideal for possible applications. Paper optics scan be used more for fast prototyping; nevertheless its performance can be increased by placing it inside water protecting foil.

  19. A Tape Method for Fast Characterization and Identification of Active Pharmaceutical Ingredients in the 2-18 THz Spectral Range

    Science.gov (United States)

    Kissi, Eric Ofosu; Bawuah, Prince; Silfsten, Pertti; Peiponen, Kai-Erik

    2015-03-01

    In order to find counterfeit drugs quickly and reliably, we have developed `tape method' a transmission spectroscopic terahertz (THz) measurement technique and compared it with a standard attenuated total reflection (ATR) THz spectroscopic measurement. We used well-known training samples, which include commercial paracetamol and aspirin tablets to check the validity of these two measurement techniques. In this study, the spectral features of some active pharmaceutical ingredients (APIs), such as aspirin and paracetamol are characterized for identification purpose. This work covers a wide THz spectral range namely, 2-18 THz. This proposed simple but novel technique, the tape method, was used for characterizing API and identifying their presence in their dosage forms. By comparing the spectra of the APIs to their dosage forms (powder samples), all distinct fingerprints present in the APIs are also present in their respective dosage forms. The positions of the spectral features obtained with the ATR techniques were akin to that obtained from the tape method. The ATR and the tape method therefore, complement each other. The presence of distinct fingerprints in this spectral range has highlighted the possibility of developing fast THz sensors for the screening of pharmaceuticals. It is worth noting that, the ATR method is applicable to flat faced tablets whereas the tape method is suitable for powders in general (e.g. curved surface tablets that require milling before measurement). Finally, we have demonstrated that ATR techniques can be used to screen counterfeit antimalarial tablets.

  20. Comparison of Thermal Detector Arrays for Off-Axis THz Holography and Real-Time THz Imaging.

    Science.gov (United States)

    Hack, Erwin; Valzania, Lorenzo; Gäumann, Gregory; Shalaby, Mostafa; Hauri, Christoph P; Zolliker, Peter

    2016-02-06

    In terahertz (THz) materials science, imaging by scanning prevails when low power THz sources are used. However, the application of array detectors operating with high power THz sources is increasingly reported. We compare the imaging properties of four different array detectors that are able to record THz radiation directly. Two micro-bolometer arrays are designed for infrared imaging in the 8-14 μm wavelength range, but are based on different absorber materials (i) vanadium oxide; (ii) amorphous silicon; (iii) a micro-bolometer array optimized for recording THz radiation based on silicon nitride; and (iv) a pyroelectric array detector for THz beam profile measurements. THz wavelengths of 96.5 μm, 118.8 μm, and 393.6 μm from a powerful far infrared laser were used to assess the technical performance in terms of signal to noise ratio, detector response and detectivity. The usefulness of the detectors for beam profiling and digital holography is assessed. Finally, the potential and limitation for real-time digital holography are discussed.

  1. Comparison of Thermal Detector Arrays for Off-Axis THz Holography and Real-Time THz Imaging

    Directory of Open Access Journals (Sweden)

    Erwin Hack

    2016-02-01

    Full Text Available In terahertz (THz materials science, imaging by scanning prevails when low power THz sources are used. However, the application of array detectors operating with high power THz sources is increasingly reported. We compare the imaging properties of four different array detectors that are able to record THz radiation directly. Two micro-bolometer arrays are designed for infrared imaging in the 8–14 μm wavelength range, but are based on different absorber materials (i vanadium oxide; (ii amorphous silicon; (iii a micro-bolometer array optimized for recording THz radiation based on silicon nitride; and (iv a pyroelectric array detector for THz beam profile measurements. THz wavelengths of 96.5 μm, 118.8 μm, and 393.6 μm from a powerful far infrared laser were used to assess the technical performance in terms of signal to noise ratio, detector response and detectivity. The usefulness of the detectors for beam profiling and digital holography is assessed. Finally, the potential and limitation for real-time digital holography are discussed.

  2. Femtosecond laser crystallization of amorphous Ge

    Science.gov (United States)

    Salihoglu, Omer; Kürüm, Ulaş; Yaglioglu, H. Gul; Elmali, Ayhan; Aydinli, Atilla

    2011-06-01

    Ultrafast crystallization of amorphous germanium (a-Ge) in ambient has been studied. Plasma enhanced chemical vapor deposition grown a-Ge was irradiated with single femtosecond laser pulses of various durations with a range of fluences from below melting to above ablation threshold. Extensive use of Raman scattering has been employed to determine post solidification features aided by scanning electron microscopy and atomic force microscopy measurements. Linewidth of the Ge optic phonon at 300 cm-1 as a function of laser fluence provides a signature for the crystallization of a-Ge. Various crystallization regimes including nanostructures in the form of nanospheres have been identified.

  3. Structural Changes Induced in Grapevine (Vitis vinifera L. DNA by Femtosecond IR Laser Pulses: A Surface-Enhanced Raman Spectroscopic Study

    Directory of Open Access Journals (Sweden)

    Nicoleta E. Dina

    2016-05-01

    Full Text Available In this work, surface-enhanced Raman spectra of ten genomic DNAs extracted from leaf tissues of different grapevine (Vitis vinifera L. varieties, respectively, are analyzed in the wavenumber range 300–1800 cm−1. Furthermore, structural changes induced in grapevine genomic nucleic acids upon femtosecond (170 fs infrared (IR laser pulse irradiation (λ = 1100 nm are discussed in detail for seven genomic DNAs, respectively. Surface-enhanced Raman spectroscopy (SERS signatures, vibrational band assignments and structural characterization of genomic DNAs are reported for each case. As a general observation, the wavenumber range between 1500 and 1660 cm−1 of the spectra seems to be modified upon laser treatment. This finding could reflect changes in the base-stacking interactions in DNA. Spectral shifts are mainly attributed to purines (dA, dG and deoxyribose. Pyrimidine residues seem to be less affected by IR femtosecond laser pulse irradiation. Furthermore, changes in the conformational properties of nucleic acid segments are observed after laser treatment. We have found that DNA isolated from Feteasca Neagra grapevine leaf tissues is the most structurally-responsive system to the femtosecond IR laser irradiation process. In addition, using unbiased computational resources by means of principal component analysis (PCA, eight different grapevine varieties were discriminated.

  4. Evaluation of SiO{sub 2}@CoFe{sub 2}O{sub 4} nano-hollow spheres through THz pulses

    Energy Technology Data Exchange (ETDEWEB)

    Rakshit, Rupali, E-mail: rupali12@bose.res.in; Pal, Monalisa; Chaudhuri, Arka; Mandal, Kalyan [Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block JD, Sector III, Salt Lake, Kolkata 700098 (India); Serita, Kazunori; Tonouchi, Masayoshi [Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871 (Japan)

    2016-05-06

    We have synthesized cobalt ferrite (CFO) nanoparticles (NPs) of diameter 100 nm and nano-hollow spheres (NHSs) of diameter 100, 160, 250, and 350 nm by a facile one step template free solvothermal technique and carried out SiO{sub 2} coating on their surface following Stöber method. The phase and morphology of the nanostructures were confirmed by X-ray diffraction and transmission electron microscope. The magnetic measurements were carried out by vibrating sample magnetometer in order to study the influence of SiO{sub 2} coating on the magnetic properties of bare CFO nanostructures. Furthermore, we have applied THz time domain spectroscopy to investigate the THz absorption property of these nanostructures in the frequency range 1.0–2.5 THz. Detailed morphology and size dependent THz absorption study unfolds that the absorption property of these nanostructures sensitively carries the unique signature of its dielectric property.

  5. Study of the radiation X-UV produced during the relativistic interaction between a femtosecond laser and an helium plasma; Etude du rayonnement X-UV produit lors de l'interaction relativiste entre un laser femtoseconde et un plasme d'helium

    Energy Technology Data Exchange (ETDEWEB)

    Ta Phuoc, K

    2002-10-15

    The aim of this work is to design a new source of X-radiation that is both femtosecond and polychromatic. We have studied the Larmor radiation emitted during the relativistic interaction between an intense femtosecond laser and an under dense helium plasma. When the value of a{sub 0}, the laser force parameter, is below 1 and when the interaction is volume is important, the characteristics of the emitted radiation are those of Bremsstrahlung radiation and radiative recombination. When the value of a{sub 0} is about 5 the emitted radiation is strongly different and look like much more the Larmor radiation. Nevertheless some features such as the shape of the angular distribution or the amplitude of the laser polarization effect are not yet well understood. The spectra of the X-ray produced is peaked around 150 eV and spreads up to 2 keV. The number of photons produced by laser shot is over 10{sup 9} and the duration of the X-ray impulse is expected to be in the same order of magnitude as that of the laser impulse: 30 fs. The average photon flux is 2*10{sup 3} ph/s/0.1%BW at 2 keV and reaches 6*10{sup 7} ph/s/0.1%BW at 0.15 keV. The average brilliance is 1.5*10{sup 4} ph/s/mm{sup 2}/mrad{sup 2}/0.1%BW at 2 keV and 8*10{sup 4} ph/s/mm{sup 2}/mrad{sup 2}/0.1%BW at 0.15 keV. Different ways are considered to improve the characteristics of this new X-ray source. (A.C.)

  6. The structure and dynamics of carbon dioxide and water containing ices investigated via THz and mid-IR spectroscopy.

    Science.gov (United States)

    Allodi, Marco A; Ioppolo, Sergio; Kelley, Matthew J; McGuire, Brett A; Blake, Geoffrey A

    2014-02-28

    Icy dust grains play a key role in the chemistry of the interstellar medium. The cumulative outcome of recent observations, laboratory studies, and astrochemical models indicates that solid-phase reaction mechanisms may dominate the formation of complex organic molecules such as amino acids and sugars in space. Consequently, the composition and structure of the icy grain mantle may significantly influence solid-phase reaction pathways. In this work, we present a new experimental setup capable of studying astrochemical ice analogs in both the TeraHertz (THz), or far-Infrared (far-IR), region (0.3-7.5 THz; 10-250 cm(-1)) and the mid-IR (400-4000 cm(-1)). The instruments are capable of performing a variety of spectroscopic studies that can provide especially relevant laboratory data to support astronomical observations from telescopes such as Herschel, SOFIA, and ALMA. Experimental spectra of astrochemical ice analogs of water and carbon dioxide in pure, mixed, and layered ices were collected at different temperatures under high vacuum conditions with the goal of investigating the structure of the ice. We tentatively observe a new feature in both amorphous solid water and crystalline water at 33 cm(-1) (1 THz). In addition, our studies of mixed and layered ices show how it is possible to identify the location of carbon dioxide as it segregates within the ice by observing its effect on the THz spectrum of water ice. The THz spectra of mixed and layered ices are further analyzed by fitting their spectral features to those of pure amorphous solid water and crystalline water ice to quantify the effects of temperature changes on structure. From the results of this work, it appears that THz spectroscopy is potentially well suited to study thermal transformations within the ice.

  7. Nano-Antenna For Terahertz (THz) Medical Imaging Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — As a result of technological breakthroughs, research and applications in the Terahertz (THz) radiation system are experiencing explosive growth. The non-ionizing...

  8. High precision spectroscopy and imaging in THz frequency range

    Science.gov (United States)

    Vaks, Vladimir L.

    2014-03-01

    Application of microwave methods for development of the THz frequency range has resulted in elaboration of high precision THz spectrometers based on nonstationary effects. The spectrometers characteristics (spectral resolution and sensitivity) meet the requirements for high precision analysis. The gas analyzers, based on the high precision spectrometers, have been successfully applied for analytical investigations of gas impurities in high pure substances. These investigations can be carried out both in absorption cell and in reactor. The devices can be used for ecological monitoring, detecting the components of chemical weapons and explosive in the atmosphere. The great field of THz investigations is the medicine application. Using the THz spectrometers developed one can detect markers for some diseases in exhaled air.

  9. TELBE - the super-radiant THz facility at ELBE

    Energy Technology Data Exchange (ETDEWEB)

    Green, Bertram; Kovalev, Sergei; Hauser, Jens; Kuntzsch, Michael; Schneider, Harald; Winnerl, Stephan; Seidel, Wolfgang; Zvyagin, Sergei; Lehnert, Ulf; Helm, Manfred; Michel, Peter; Gensch, Michael [Helmholtz-Zentrum Dresden-Rossendorf (Germany); Al-Shemmary, Alaa; Radu, Ilie; Stojanovic, Nikola; Cavalleri, Andrea [Deutsches Elektronen-Synchrotron (Germany); Wall, Simon [FHI Berlin (Germany); Eng, Lukas M. [Technische Universitaet Dresden (Germany); Heberle, Joachim [FU Berlin (Germany)

    2013-07-01

    It has been shown recently that relativistic electron bunches can be utilized for the generation of super-radiant coherent THz radiation by one single pass through an undulator, bending magnet, or CDR/CTR screens. However, the high THz fields have all been achieved at large accelerators that allow for high electron beam energies. A crucially important research topic for the next years at the HZDR is therefore to investigate whether an equally fine control over highly charged electron bunch form can be routinely achieved in a low electron beam energy accelerator like ELBE. If successful this development would allow the generation of high field THz fields by linear accelerators at considerably reduced cost. Given stable operation can be provided, TELBE, could also become a world-wide unique research facility for high field THz science. The current status and an outlook on future developments are presented.

  10. Tunable THz perfect absorber using graphene-based metamaterials

    Science.gov (United States)

    Faraji, Mahboobeh; Moravvej-Farshi, Mohammad Kazem; Yousefi, Leila

    2015-11-01

    A tunable THz absorber, with absorbance more than 90% is proposed, and numerically characterized. The absorber structure is based on metamaterials with unit cells consisting of two patterned graphene layers separated by a 5-nm thick layer of Al2O3. Numerical results show that when the chemical potential of the top graphene microribbons are tuned by an external variable bias and that of the lower graphene fishnet is kept at μC=0, frequency of the absorption peaks can be tuned as desired, therefore we can have a tunable or switchable absorber. The proposed absorber can have applications in designing tunable reflective THz filters or tunable THz switches and modulators. It can also be used for cloaking objects in THz range.

  11. Heat Induced Damage Detection by Terahertz (THz) Radiation

    Science.gov (United States)

    Rahani, Ehsan Kabiri; Kundu, Tribikram; Wu, Ziran; Xin, Hao

    2011-06-01

    Terahertz (THz) and sub-terahertz imaging and spectroscopy are becoming increasingly popular nondestructive evaluation techniques for damage detection and characterization of materials. THz radiation is being used for inspecting ceramic foam tiles used in TPS (Thermal Protection System), thick polymer composites and polymer tiles that are not good conductors of ultrasonic waves. Capability of THz electromagnetic waves in detecting heat induced damage in porous materials is investigated in this paper. Porous pumice stone blocks are subjected to long time heat exposures to produce heat induced damage in the block. The dielectric properties extracted from THz TDS (Time Domain Spectroscopy) measurements are compared for different levels of heat exposure. Experimental results show noticeable and consistent change in dielectric properties with increasing levels of heat exposure, well before its melting point.

  12. THz induced nonlinear absorption in ZnTe

    DEFF Research Database (Denmark)

    Pedersen, Pernille Klarskov; Jepsen, Peter Uhd

    2015-01-01

    Absorption spectra of ZnTe during strong-field THz interaction are investigated. Bleaching of the difference phonon modes below the fundamental TO mode is observed when field strengths higher than 4 MV/cm are applied.......Absorption spectra of ZnTe during strong-field THz interaction are investigated. Bleaching of the difference phonon modes below the fundamental TO mode is observed when field strengths higher than 4 MV/cm are applied....

  13. Saturated absorption in a rotational molecular transition at 2.5 THz using a quantum cascade laser

    Energy Technology Data Exchange (ETDEWEB)

    Consolino, L., E-mail: luigi.consolino@ino.it; Campa, A.; Ravaro, M.; Mazzotti, D.; Bartalini, S.; De Natale, P. [INO, Istituto Nazionale di Ottica-CNR, Largo E. Fermi 6, Firenze I-50125 (Italy); LENS, European Laboratory for Non-Linear Spectroscopy, Via N. Carrara 1, Sesto Fiorentino, I-50019 (Italy); Vitiello, M. S. [NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, Piazza San Silvestro 12, Pisa I-56127 (Italy)

    2015-01-12

    We report on the evidence of saturation effects in a rotational transition of CH{sub 3}OH around 2.5 THz, induced by a free-running continuous-wave quantum cascade laser (QCL). The QCL emission is used for direct-absorption spectroscopy experiments, allowing to study the dependence of the absorption coefficient on gas pressure and laser intensity. A saturation intensity of 25 μW/mm{sup 2}, for a gas pressure of 17 μbar, is measured. This result represents the initial step towards the implementation of a QCL-based high-resolution sub-Doppler THz spectroscopy, which is expected to improve by orders of magnitude the precision of THz spectrometers.

  14. Theoretical analysis and numerical study of 0.22 THz FWG-TWT%0.22THz折叠波导行波管放大器理论分析与数值模拟

    Institute of Scientific and Technical Information of China (English)

    董烨; 董志伟; 杨温渊; 陈军

    2011-01-01

    为了解折叠波导行波管放大器的性能影响因素,在理论分析的基础上,对0.22 THz折叠波导行波管放大器进行系统的数值模拟与分析,重点讨论电子束压、束流、输入信号功率、结构周期数、材料电导率、引导磁场大小、电子能散度以及发射度对器件输出功率水平的影响.发现束压存在最佳工作范围,增加束流可以有效提高器件增益;输入信号不宜过强,否则器件增益反而会下降;器件结构周期数存在一个最优范围,过多过少对器件性能都有影响;采用电导率高、表面光洁度高的金属材料,可以降低器壁损耗;引导磁场达到聚束要求即可,无需太高;尽可能控制电子的能散度和发射度,提高电子束质量可以提升器件性能.采用自编的三维全电磁粒子模拟大规模并行程序NEPTUNE,对0.22 THz折叠波导行波管放大器的性能进行了对比分析,给出了束波互作用过程的基本图像,并对器件输出端口反射所引发的自激振荡现象进行了重点分析.%In order to study the influenre factors on the performance of FWC-TWT(Folded WaveCuide Traveling-Wave Tuhe), a 0.22 THz FWC-TWT was designed and simulated, some important elements, including heam voltage, current, input signal power, structure periods numher, material conductivity , guide magnet, energy spread. and angular spread of emission electrons, were numerically studied and discussed. The simulation results indicate that, there is an optimal beam-voltage range; the gain can be improved by increasing electric current; the input signal power is not the higher the better,and the number of structure periods is not the more the better; higher conductivity and surface finish of the material could increase the gain of the device; the guide magnet will be high enough when the electron beam can be constrained ; and improving electron quality by controlling electron energy and angular spread can increase the gain of the

  15. The physical theory and propagation model of THz atmospheric propagation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, R; Yao, J Q; Xu, D G; Wang, J L; Wang, P, E-mail: wangran19861014@163.com [College of Precision Instrument and Opto-electronics Engineering, Institute of Laser and Opto-electronics, Tianjin University, Tianjin 300072 (China)

    2011-02-01

    Terahertz (THz) radiation is extensively applied in diverse fields, such as space communication, Earth environment observation, atmosphere science, remote sensing and so on. And the research on propagation features of THz wave in the atmosphere becomes more and more important. This paper firstly illuminates the advantages and outlook of THz in space technology. Then it introduces the theoretical framework of THz atmospheric propagation, including some fundamental physical concepts and processes. The attenuation effect (especially the absorption of water vapor), the scattering of aerosol particles and the effect of turbulent flow mainly influence THz atmosphere propagation. Fundamental physical laws are illuminated as well, such as Lamber-beer law, Mie scattering theory and radiative transfer equation. The last part comprises the demonstration and comparison of THz atmosphere propagation models like Moliere(V5), SARTre and AMATERASU. The essential problems are the deep analysis of physical mechanism of this process, the construction of atmospheric propagation model and databases of every kind of material in the atmosphere, and the standardization of measurement procedures.

  16. Computational Investigations of THz Transmittance in the Atmosphere

    Science.gov (United States)

    Yang, Xingyu; Calhoun, Casey; Calhoun, Ronald

    2016-06-01

    With the recent scientific advancements in Terahertz (THz) wave propagation and reception technology, there has been significant development in new possibilities for using THz waves - offering new possibilities in THz detection and ranging. A first foundational step toward this goal is to better understand THz transmittance in the turbulent atmosphere. In this project, a frequency modulation pattern of THz waves was created by utilizing a system of shifting frequency based on temperature, air humidity, and distance of transmission. The total path loss of the wave in air, based on the wave spread and molecular absorption, was then modeled using radiative transfer theory, onto a set of JavaHAWK filtered-HITRAN data representative of an air sample. This data was used to generate a path loss matrix, which was then used to optimize frequency of transmission for the specific conditions. The concept to be evaluated is whether adaptive frequency modulated THz might usefully decrease transmission losses by adjusting to atmospheric conditions (such as local variations in temperature and humidity).

  17. The physical theory and propagation model of THz atmospheric propagation

    Science.gov (United States)

    Wang, R.; Yao, J. Q.; Xu, D. G.; Wang, J. L.; Wang, P.

    2011-02-01

    Terahertz (THz) radiation is extensively applied in diverse fields, such as space communication, Earth environment observation, atmosphere science, remote sensing and so on. And the research on propagation features of THz wave in the atmosphere becomes more and more important. This paper firstly illuminates the advantages and outlook of THz in space technology. Then it introduces the theoretical framework of THz atmospheric propagation, including some fundamental physical concepts and processes. The attenuation effect (especially the absorption of water vapor), the scattering of aerosol particles and the effect of turbulent flow mainly influence THz atmosphere propagation. Fundamental physical laws are illuminated as well, such as Lamber-beer law, Mie scattering theory and radiative transfer equation. The last part comprises the demonstration and comparison of THz atmosphere propagation models like Moliere(V5), SARTre and AMATERASU. The essential problems are the deep analysis of physical mechanism of this process, the construction of atmospheric propagation model and databases of every kind of material in the atmosphere, and the standardization of measurement procedures.

  18. High speed imaging with CW THz for security

    Science.gov (United States)

    Song, Qian; Redo-Sanchez, Albert; Zhao, Yuejin; Zhang, Cunlin

    2008-12-01

    Continuous THz wave (CW THz) has been widely used in imaging field. But for security screening such as inspection at the airport, the speed of the imaging calls for an improvement since the former CW image systems which scan point to point could not satisfy. To increase the image speed, we proposed a fast CW THz image system in which a galvanometer is introduced for the first time. The galvanometer makes the coming beam reflected in different angles by vibrating at a certain frequency which can significantly decrease the image acquisition time compare to point scan THz imaging. A big hyperbolic polyethylene lens is also used in the system to collect all the beams on to the target. A Gunn oscillator and a corresponding Schottky diode are the source and detector respectively. The image we get has ideal resolution. And after image processing, the images looked not only clear but also realistic. The system has more practicality because it is designed in reflection geometry instead of transmission geometry. Moreover, the source and detector in our system do not as ponderous as gas laser which has been used in many THz imaging system previously. Example of measurements of weapons concealed behind the cloth and box are presented and discussed. A compact high speed THz imaging system is expectable which will have a widely application in security field.

  19. Low-noise THz MgB2 Josephson mixer

    Science.gov (United States)

    Cunnane, Daniel; Kawamura, Jonathan H.; Acharya, Narendra; Wolak, Matthäus A.; Xi, X. X.; Karasik, Boris S.

    2016-09-01

    The potential applications for high frequency operation of the Josephson effect in MgB2 include THz mixers, direct detectors, and digital circuits. Here we report on MgB2 weak links which exhibit the Josephson behavior up to almost 2 THz and using them for low-noise heterodyne detection of THz radiation. The devices are made from epitaxial film grown in the c-axis direction by the hybrid physical-chemical vapor deposition method. The current in the junctions travels parallel to the surface of the film, thus making possible a large contribution of the quasi-two-dimensional σ-gap in transport across the weak link. These devices are connected to a planar spiral antenna with a dielectric substrate lens to facilitate coupling to free-space radiation for use as a detector. The IcRn product of the junction is 5.25 mV, giving confirmation of a large gap parameter. The sensitivity of the mixer was measured from 0.6 THz to 1.9 THz. At a bath temperature of over 20 K, a mixer noise temperature less than 2000 K (DSB) was measured near 0.6 THz.

  20. Computational Investigations of THz Transmittance in the Atmosphere

    Directory of Open Access Journals (Sweden)

    Yang Xingyu

    2016-01-01

    Full Text Available With the recent scientific advancements in Terahertz (THz wave propagation and reception technology, there has been significant development in new possibilities for using THz waves – offering new possibilities in THz detection and ranging. A first foundational step toward this goal is to better understand THz transmittance in the turbulent atmosphere. In this project, a frequency modulation pattern of THz waves was created by utilizing a system of shifting frequency based on temperature, air humidity, and distance of transmission. The total path loss of the wave in air, based on the wave spread and molecular absorption, was then modeled using radiative transfer theory, onto a set of JavaHAWK filtered-HITRAN data representative of an air sample. This data was used to generate a path loss matrix, which was then used to optimize frequency of transmission for the specific conditions. The concept to be evaluated is whether adaptive frequency modulated THz might usefully decrease transmission losses by adjusting to atmospheric conditions (such as local variations in temperature and humidity.

  1. Femtosecond X-Ray Scattering Study of Ultrafast Photoinduced Structural Dynamics in Solvated [Co(terpy)2]2+

    DEFF Research Database (Denmark)

    Biasin, Elisa; Brandt van Driel, Tim; Kjær, Kasper Skov;

    2016-01-01

    We study the structural dynamics of photoexcited [Co(terpy)2]2+ in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitat......We study the structural dynamics of photoexcited [Co(terpy)2]2+ in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows...

  2. Femtosecond electron-bunch dynamics in laser wakefields and vacuum

    NARCIS (Netherlands)

    Khachatryan, A.G.; Irman, A.; Goor, van F.A.; Boller, K.-J.

    2007-01-01

    Recent advances in laser wakefield acceleration demonstrated the generation of extremely short (with a duration of a few femtoseconds) relativistic electron bunches with relatively low (of the order of couple of percent) energy spread. In this article we study the dynamics of such bunches in drift s

  3. Formation of nanostructures under femtosecond laser ablation of metals

    Energy Technology Data Exchange (ETDEWEB)

    Ashitkov, S I; Romashevskii, S A; Komarov, P S; Burmistrov, A A; Agranat, M B [Joint Institute for High Temperatures, Russian Academy of Sciences, Moscow (Russian Federation); Zhakhovskii, V V [All-Russian Institute of Automatics, Moscow (Russian Federation); Inogamov, N A [Landau Institute for Theoretical Physics, Russian Academy of Sciences, Chernogolovka, Moscow region (Russian Federation)

    2015-06-30

    We present the results of studying the morphology of the modified surface of aluminium, nickel and tantalum after ablation of the surface layer by a femtosecond laser pulse. The sizes of characteristic elements of a cellular nanostructure are found to correlate with thermo-physical properties of the material and the intensity of laser radiation. (superstrong light fields)

  4. High-precision measurement of terahertz frequency using an unstabilized femtosecond laser%利用非锁定飞秒激光实现太赫兹频率的精密测量∗

    Institute of Scientific and Technical Information of China (English)

    孙青; 杨奕; 邓玉强; 孟飞; 赵昆

    2016-01-01

    Frequency is one of the most important physical quantities of electromagnetic (EM) waves. With the development of terahertz (THz) technology, high-precision measurement of THz frequency is required in THz laser development, wireless communication and ultra fine spectrum measurement. The traditional Fabry-Perot (F-P) interferometry and heterodyne detection method are both difficult to achieve high-precision measurement of THz frequency. Within the range of light wave band, the femtosecond optical frequency comb has long been applied to the light wave frequency measurement due to its extremely high accuracy and stability. By using frequency comb method, measurement with accuracy in the order of 10−11 can also be achieved in THz band. To generate THz frequency combs with stable and controllable frequency, it is required to conduct precise stabilization control on repetition frequency of the femtosecond laser. As a result, some special designs are needed for the femtosecond laser in addition to repetition frequency control devices, including the reference signal source, servo-control module, HV drive module, temperature control module, etc., resulting in a rather complicated system. In this paper, a new method for THz frequency measurement by using an unstabilized femtosecond laser is introduced. The laser is free running and the repetition frequency continuously reduces approximately 8 kHz in 6 h, which is the result of a lengthened laser cavity due to the thermal expansion caused by temperature rise after the laser has been switched on. The repetition frequency and beat signal frequency are simultaneously and continuously measured by two frequency counters. The THz frequency can be calculated from the data with accuracy in the order of 10−10 . Although the measurement precision is reduced by one order compared with that obtained by using stabilized femtosecond laser, the system is greatly simplified. The femtosecond laser and complicated repetition frequency

  5. Feasibility study on temporal-resolved diffraction of high-energy electrons produced in femtosecond laser-plasmas

    CERN Document Server

    Zhang Jun; Cang Yu; Chen Qing; Peng Lian Mao; Wang Huai Bin; Zhong Jia Yong

    2002-01-01

    The high-energy electrons can be produced in the interaction between intense ultra-short laser pulses and Al targets. The diffraction may take place when high-energy electrons pass through an Al single crystal. Feasibility is studied using such diffraction as a method to analyze the structures of crystals

  6. Non Destructive Thermal Analysis and In Situ Investigation of Creep Mechanism of Graphite and Ceramic Composites using Phase-sensitive THz Imaging & Nonlinear Resonant Ultrasonic Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, XI-Cheng [Univ. of Rochester, NY (United States). Inst. of Optics; Hurley, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Redo-Scanchez, Albert [Zomega Terahertz Corp., East Greenbush, NY (United States)

    2012-11-26

    In this project, we conducted a comprehensive study on nuclear graphite properties with terahertz (THz) imaging. Graphite samples from Idaho National Laboratory were carefully imaged by continuous wave (CW) THz. The CW THz imaging of graphite shows that the samples from different billet with different fabricating conditions have different pore size and structure. Based on this result, we then used a phase sensitive THz system to study the graphite properties. In this exploration, various graphite were studied. By imaging nuclear graphite samples in reflection mode at nine different incident polarization angles using THz time-domain spectroscopy, we find that different domain distributions and levels of porosity will introduce polarization dependence in THz reflectivity. Sample with higher density is less porous and has a smaller average domain distribution. As a consequence, it is less polarization-dependent and the polarization-dependent frequency is higher. The results also show that samples oxidized at higher temperatures tend to be more polarization dependent. The graphite from the external billet is more polarization dependent compared to that from the center billet. In addition, we performed laser-based ultrasonic measurements on these graphite samples. The denser, unoxidized samples allow surface acoustic waves to propagate more rapidly than in the samples that had already undergone oxidation. Therefore, for the oxidized samples, the denser samples show less polarization-dependence, higher polarization-dependent frequency, and allow the surface acoustic waves propagate faster.

  7. Infrared emissivity studies of melting thresholds and structural changes of aluminium and copper samples heated by femtosecond laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Hallo, L; Riou, O; Stenz, C; Tikhonchuk, V T [Centre Lasers Intenses et Applications, UMR 5107 CNRS-Universite Bordeaux 1-CEA, Universite Bordeaux 1, 351 Cours de la Liberation, 33405 Talence Cedex (France)

    2006-12-21

    We propose a new method for studies of laser-induced heating and melting of metallic foils. The method is based on time-integrated measurements of the surface infrared thermal emission. The experimental data are compared with a model where two equations describe the evolution of electron and lattice temperatures and the emissivity is found from the Drude model with the temperature-dependent electron collision frequency. A good agreement between the experimental data and the model is found for the aluminium samples. It is less satisfactory for the copper, but a signature of phase melting can also be pointed out. A multi-pulse laser irradiation study indicates significant changes in the surface emittance, related to preheating, oxidation and/or chemical modification of the copper sample. The proposed method is relatively simple and complementary to the pump-probe technique.

  8. THz-circuits driven by photo-thermoelectric, gate-tunable graphene-junctions

    Science.gov (United States)

    Brenneis, Andreas; Schade, Felix; Drieschner, Simon; Heimbach, Florian; Karl, Helmut; Garrido, Jose A.; Holleitner, Alexander W.

    2016-10-01

    For future on-chip communication schemes, it is essential to integrate nanoscale materials with an ultrafast optoelectronic functionality into high-frequency circuits. The atomically thin graphene has been widely demonstrated to be suitable for photovoltaic and optoelectronic devices because of its broadband optical absorption and its high electron mobility. Moreover, the ultrafast relaxation of photogenerated charge carriers has been verified in graphene. Here, we show that dual-gated graphene junctions can be functional parts of THz-circuits. As the underlying optoelectronic process, we exploit ultrafast photo-thermoelectric currents. We describe an immediate photo-thermoelectric current of the unbiased device following a femtosecond laser excitation. For a picosecond time-scale after the optical excitation, an additional photo-thermoelectric contribution shows up, which exhibits the fingerprint of a spatially inverted temperature profile. The latter can be understood by the different time-constants and thermal coupling mechanisms of the electron and phonon baths within graphene to the substrate and the metal contacts. The interplay of the processes gives rise to ultrafast electromagnetic transients in high-frequency circuits, and it is equally important for a fundamental understanding of graphene-based ultrafast photodetectors and switches.

  9. THz-circuits driven by photo-thermoelectric, gate-tunable graphene-junctions

    Science.gov (United States)

    Brenneis, Andreas; Schade, Felix; Drieschner, Simon; Heimbach, Florian; Karl, Helmut; Garrido, Jose A.; Holleitner, Alexander W.

    2016-01-01

    For future on-chip communication schemes, it is essential to integrate nanoscale materials with an ultrafast optoelectronic functionality into high-frequency circuits. The atomically thin graphene has been widely demonstrated to be suitable for photovoltaic and optoelectronic devices because of its broadband optical absorption and its high electron mobility. Moreover, the ultrafast relaxation of photogenerated charge carriers has been verified in graphene. Here, we show that dual-gated graphene junctions can be functional parts of THz-circuits. As the underlying optoelectronic process, we exploit ultrafast photo-thermoelectric currents. We describe an immediate photo-thermoelectric current of the unbiased device following a femtosecond laser excitation. For a picosecond time-scale after the optical excitation, an additional photo-thermoelectric contribution shows up, which exhibits the fingerprint of a spatially inverted temperature profile. The latter can be understood by the different time-constants and thermal coupling mechanisms of the electron and phonon baths within graphene to the substrate and the metal contacts. The interplay of the processes gives rise to ultrafast electromagnetic transients in high-frequency circuits, and it is equally important for a fundamental understanding of graphene-based ultrafast photodetectors and switches. PMID:27762291

  10. THz Pyro-Optical Detector Based on LiNbO3 Whispering Gallery Mode Microdisc Resonator

    Science.gov (United States)

    Cosci, Alessandro; Cerminara, Matteo; Nunzi Conti, Gualtiero; Soria, Silvia; Righini, Giancarlo C.; Pelli, Stefano

    2017-01-01

    This study analyzes the capabilities of a LiNbO3 whispering gallery mode microdisc resonator as a potential bolometer detector in the THz range. The resonator is theoretically characterized in the stationary regime by its thermo-optic and thermal coefficients. Considering a Q-factor of 107, a minimum detectable power of 20 μW was evaluated, three orders of magnitude above its noise equivalent power. This value opens up the feasibility of exploiting LiNbO3 disc resonators as sensitive room-temperature detectors in the THz range. PMID:28134857

  11. Semianalytical study of the propagation of an ultrastrong femtosecond laser pulse in a plasma with ultrarelativistic electron jitter

    Energy Technology Data Exchange (ETDEWEB)

    Jovanović, Dušan, E-mail: dusan.jovanovic@ipb.ac.rs [Institute of Physics, University of Belgrade, Pregrevica 118, 11080 Belgrade, Zemun (Serbia); Fedele, Renato, E-mail: renato.fedele@na.infn.it [Dipartimento di Fisica, Università di Napoli “Federico II,” M.S. Angelo, Napoli (Italy); INFN Sezione di Napoli, Complesso Universitario di M.S. Angelo, Napoli (Italy); Belić, Milivoj, E-mail: milivoj.belic@qatar.tamu.edu [Texas A and M University at Qatar, P.O. Box 23874, Doha (Qatar); De Nicola, Sergio, E-mail: sergio.denicola@spin.cnr.it [SPIN-CNR, Complesso Universitario di M.S. Angelo, Napoli (Italy)

    2015-04-15

    The interaction of a multi-petawatt, pancake-shaped laser pulse with an unmagnetized plasma is studied analytically and numerically in a regime with ultrarelativistic electron jitter velocities, in which the plasma electrons are almost completely expelled from the pulse region. The study is applied to a laser wakefield acceleration scheme with specifications that may be available in the next generation of Ti:Sa lasers and with the use of recently developed pulse compression techniques. A set of novel nonlinear equations is derived using a three-timescale description, with an intermediate timescale associated with the nonlinear phase of the electromagnetic wave and with the spatial bending of its wave front. They describe, on an equal footing, both the strong and the moderate laser intensity regimes, pertinent to the core and to the edges of the pulse. These have fundamentally different dispersive properties since in the core the electrons are almost completely expelled by a very strong ponderomotive force, and the electromagnetic wave packet is imbedded in a vacuum channel, thus having (almost) linear properties. Conversely, at the pulse edges, the laser amplitude is smaller, and the wave is weakly nonlinear and dispersive. New nonlinear terms in the wave equation, introduced by the nonlinear phase, describe without the violation of imposed scaling laws a smooth transition to a nondispersive electromagnetic wave at very large intensities and a simultaneous saturation of the (initially cubic) nonlocal nonlinearity. The temporal evolution of the laser pulse is studied both analytically and by numerically solving the model equations in a two-dimensional geometry, with the spot diameter presently used in some laser acceleration experiments. The most stable initial pulse length is estimated to exceed ≳1.5–2 μm. Moderate stretching of the pulse in the direction of propagation is observed, followed by the development of a vacuum channel and of a very large

  12. Comparative study of CW, nanosecond- and femtosecond-pulsed laser microcutting of AZ31 magnesium alloy stents.

    Science.gov (United States)

    Gökhan Demir, Ali; Previtali, Barbara

    2014-06-01

    Magnesium alloys constitute an interesting solution for cardiovascular stents due to their biocompatibility and biodegradability in human body. Laser microcutting is the industrially accepted method for stent manufacturing. However, the laser-material interaction should be well investigated to control the quality characteristics of the microcutting process that concern the surface roughness, chemical composition, and microstructure of the final device. Despite the recent developments in industrial laser systems, a universal laser source that can be manipulated flexibly in terms of process parameters is far from reality. Therefore, comparative studies are required to demonstrate processing capabilities. In particular, the laser pulse duration is a key factor determining the processing regime. This work approaches the laser microcutting of AZ31 Mg alloy from the perspective of a comparative study to evaluate the machining capabilities in continuous wave (CW), ns- and fs-pulsed regimes. Three industrial grade machining systems were compared to reach a benchmark in machining quality, productivity, and ease of postprocessing. The results confirmed that moving toward the ultrashort pulse domain the machining quality increases, but the need for postprocessing remains. The real advantage of ultrashort pulsed machining was the ease in postprocessing and maintaining geometrical integrity of the stent mesh after chemical etching. Resultantly, the overall production cycle time was shortest for fs-pulsed laser system, despite the fact that CW laser system provided highest cutting speed.

  13. Chiral THz metamaterial with tunable optical activity

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Jiangfeng [Los Alamos National Laboratory; Taylor, Antoinette [Los Alamos National Laboratory; O' Hara, John [Los Alamos National Laboratory; Chowdhury, Roy [Los Alamos National Laboratory; Zhao, Rongkuo [IOWA STATE UNIV; Soukoullis, Costas M [IOWA STATE UNIV

    2010-01-01

    Optical activity in chiral metamaterials is demonstrated in simulation and shows actively tunable giant polarization rotation at THz frequencies. Electric current distributions show that pure chirality is achieved by our bi-Iayer chiral metamaterial design. The chirality can be optically controlled by illumination with near-infrared light. Optical activity, occurring in chiral materials such as DNA, sugar and many other bio-molecules, is a phenomenon of great importance to many areas of science including molecular biology, analytical chemistry, optoelectronics and display applications. This phenomenon is well understood at an effective medium level as a magnetic/electric moment excited by the electric/magnetic field of the incident electromagnetic (EM) wave. Usually, natural chiral materials exhibit very weak optical activity e.g. a gyrotropic quartz crystal. The optical activity of chiral metamaterials, however, can be five orders of magnitude stronger. Chiral metamaterials are made of sub-wavelength resonators lacking symmetry planes. The asymmetry allows magnetic moments to be excited by the electric field of the incident EM wave and vice versa. Recently, chiral metamaterials have been demonstrated and lead to prospects in giant optical activity, circular dichroism, negative refraction and reversing the Casmir force. These fascinating optical properties require strong chirality, which may be designed through the microscopic structure of chiral metamaterials. However, these metamaterials have a fixed response function, defined by the geometric structuring, which limits their ability to manipulate EM waves. Active metamaterials realize dynamic control of response functions and have produced many influential applications such as ultra-fast switching devices, frequency and phase modulation and memory devices. Introducing active designs to chiral metamaterials will give additional freedom in controlling the optical activity, and therefore enable dynamic manipulation

  14. Femtosecond X-Ray Scattering Study of Ultrafast Photoinduced Structural Dynamics in Solvated [Co(terpy)2]2+

    CERN Document Server

    Biasin, Elisa; Kjær, Kasper S; Dohn, Asmus O; Christensen, Morten; Harlang, Tobias; Chabera, Pavel; Liu, Yizhu; Uhlig, Jens; Pápai, Mátyás; Németh, Zoltán; Hartsock, Robert; Liang, Winnie; Zhang, Jianxin; Alonso-Mori, Roberto; Chollet, Matthieu; Glownia, James M; Nelson, Silke; Sokaras, Dimosthenis; Assefa, Tadesse A; Britz, Alexander; Galler, Andreas; Gawelda, Wojciech; Bressler, Christian; Gaffney, Kelly J; Lemke, Henrik T; Møller, Klaus B; Nielsen, Martin M; Sundström, Villy; Vankó, György; Wärnmark, Kenneth; Canton, Sophie E; Haldrup, Kristoffer

    2016-01-01

    We study the structural dynamics of photoexcited [Co(terpy)2]2+ in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitation event leads to elongation of the Co-N bonds, followed by coherent Co-N bond length oscillations arising from the impulsive excitation of a vibrational mode dominated by the symmetrical stretch of all six Co-N bonds. This mode has a period of 0.33 ps and decays on a subpicosecond time scale. We find that the equilibrium bond-elongated structure of the high spin state is established on a single-picosecond time scale and that this state has a lifetime of ~ 7 ps.

  15. Femtosecond X-Ray Scattering Study of Ultrafast Photoinduced Structural Dynamics in Solvated [Co (terpy)2]2 +

    Science.gov (United States)

    Biasin, Elisa; van Driel, Tim Brandt; Kjær, Kasper S.; Dohn, Asmus O.; Christensen, Morten; Harlang, Tobias; Chabera, Pavel; Liu, Yizhu; Uhlig, Jens; Pápai, Mátyás; Németh, Zoltán; Hartsock, Robert; Liang, Winnie; Zhang, Jianxin; Alonso-Mori, Roberto; Chollet, Matthieu; Glownia, James M.; Nelson, Silke; Sokaras, Dimosthenis; Assefa, Tadesse A.; Britz, Alexander; Galler, Andreas; Gawelda, Wojciech; Bressler, Christian; Gaffney, Kelly J.; Lemke, Henrik T.; Møller, Klaus B.; Nielsen, Martin M.; Sundström, Villy; Vankó, György; Wärnmark, Kenneth; Canton, Sophie E.; Haldrup, Kristoffer

    2016-07-01

    We study the structural dynamics of photoexcited [Co (terpy)2]2 + in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitation event leads to elongation of the Co-N bonds, followed by coherent Co-N bond length oscillations arising from the impulsive excitation of a vibrational mode dominated by the symmetrical stretch of all six Co-N bonds. This mode has a period of 0.33 ps and decays on a subpicosecond time scale. We find that the equilibrium bond-elongated structure of the high spin state is established on a single-picosecond time scale and that this state has a lifetime of ˜7 ps .

  16. Femtosecond X-Ray Scattering Study of Ultrafast Photoinduced Structural Dynamics in Solvated [Co(terpy)_{2}]^{2+}.

    Science.gov (United States)

    Biasin, Elisa; van Driel, Tim Brandt; Kjær, Kasper S; Dohn, Asmus O; Christensen, Morten; Harlang, Tobias; Chabera, Pavel; Liu, Yizhu; Uhlig, Jens; Pápai, Mátyás; Németh, Zoltán; Hartsock, Robert; Liang, Winnie; Zhang, Jianxin; Alonso-Mori, Roberto; Chollet, Matthieu; Glownia, James M; Nelson, Silke; Sokaras, Dimosthenis; Assefa, Tadesse A; Britz, Alexander; Galler, Andreas; Gawelda, Wojciech; Bressler, Christian; Gaffney, Kelly J; Lemke, Henrik T; Møller, Klaus B; Nielsen, Martin M; Sundström, Villy; Vankó, György; Wärnmark, Kenneth; Canton, Sophie E; Haldrup, Kristoffer

    2016-07-01

    We study the structural dynamics of photoexcited [Co(terpy)_{2}]^{2+} in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitation event leads to elongation of the Co-N bonds, followed by coherent Co-N bond length oscillations arising from the impulsive excitation of a vibrational mode dominated by the symmetrical stretch of all six Co-N bonds. This mode has a period of 0.33 ps and decays on a subpicosecond time scale. We find that the equilibrium bond-elongated structure of the high spin state is established on a single-picosecond time scale and that this state has a lifetime of ∼7  ps.

  17. The origin of radiationless conversion of the excited state in the kindling fluorescent protein (KFP): femtosecond studies and quantum modeling

    Science.gov (United States)

    Shelaev, I.; Mironov, V.; Rusanov, A.; Gostev, F.; Bochenkova, A.; Sarkisov, O.; Nemukhin, A.; Savitsky, A.

    2011-06-01

    The Ala143Gly variant of the chromoprotein asCP from the sea anemony Anemonia sulcata, called the kindling fluorescent protein (KFP), is a promising candidate for the development of novel subdiffraction method of fluorescent microscopy. The pump-probe method with the delay times between the pump and probe pulses up to 5 ps was applied to study dynamics of the primary processes upon excitation of KFP. The differential absorption spectra at 80 fs delay showed the absorption peak in the range 450-510 nm with the maximum wavelength at 490 nm, which diminished almost twice by intensity by 400 fs and practically disappeared by 1.5 ps. The quantum calculations showed that upon photo-excitation of KFP to the first excited state S1, the fast radiationless relaxation occurred to the ground state S0 due to rotation of the phenolic fragment of the chromophore.

  18. Femtosecond laser for glaucoma treatment: the comparison between simulation and experimentation results on ocular tissue removal

    Science.gov (United States)

    Hou, Dong Xia; Ngoi, Bryan K. A.; Hoh, Sek Tien; Koh, Lee Huat K.; Deng, Yuan Zi

    2005-04-01

    In ophthalmology, the use of femtosecond lasers is receiving more attention than ever due to its extremely high intensity and ultra short pulse duration. It opens the highly beneficial possibilities for minimized side effects during surgery process, and one of the specific areas is laser surgery in glaucoma treatment. However, the sophisticated femtosecond laser-ocular tissue interaction mechanism hampers the clinical application of femtosecond laser to treat glaucoma. The potential contribution in this work lies in the fact, that this is the first time a modified moving breakdown theory is applied, which is appropriate for femtosecond time scale, to analyze femtosecond laser-ocular tissue interaction mechanism. Based on this theory, energy deposition and corresponding thermal increase are studied by both simulation and experimentation. A simulation model was developed using Matlab software, and the simulation result was validated through in-vitro laser-tissue interaction experiment using pig iris. By comparing the theoretical and experimental results, it is shown that femtosecond laser can obtain determined ocular tissue removal, and the thermal damage is evidently reduced. This result provides a promising potential for femtosecond laser in glaucoma treatment.

  19. Resonant THz sensor for paper quality monitoring using THz fiber Bragg gratings

    CERN Document Server

    Yan, Guofeng; Mikulic, Predrag; Bock, Wojtek J; Skorobogatiy, Maksim

    2013-01-01

    We report fabrication of THz fiber Bragg gratings (TFBG) using CO2 laser inscription on subwavelength step-index polymer fibers. A fiber Bragg grating with 48 periods features a ~4 GHz-wide stop band and ~15 dB transmission loss in the middle of a stop band. The potential of such gratings in design of resonant sensor for monitoring of paper quality is demonstrated. Experimental spectral sensitivity of the TFBG-based paper thickness sensor was found to be ~ -0.67 GHz / 10 um. A 3D electromagnetic model of a Bragg grating was used to explain experimental findings.

  20. THz and sub-THz (MMW)-over-Fiber Data Links and Radar Technology

    Science.gov (United States)

    2016-12-05

    IEEE has already set up a THz Interest Group (IGthz for short) in the IEEE 802.15 WPAN Committee (http://www.ieee802.org/15/pub/IGthz.html...Terahertz,” IEEE Spectrum, September 2012) in the atmosphere. Our approach, in fact, mitigates the problem. The goal, as discussed by IGthz, is not to...Sel. Top. Quantum Electron., Vol. 20, No. 6, art. 3803507, Nov/Dec 2014. [DOI: 10.1109/JSTQE.2014.2329940] IEEE /OSA J. Lightwave Technol., vol. 34

  1. THz and sub THz (MMW)-over-Fiber Data Links and Radar Technology

    Science.gov (United States)

    2016-11-30

    IEEE has already set up a THz Interest Group (IGthz for short) in the IEEE 802.15 WPAN Committee (http://www.ieee802.org/15/pub/IGthz.html...Terahertz,” IEEE Spectrum, September 2012) in the atmosphere. Our approach, in fact, mitigates the problem. The goal, as discussed by IGthz, is not to...Sel. Top. Quantum Electron., Vol. 20, No. 6, art. 3803507, Nov/Dec 2014. [DOI: 10.1109/JSTQE.2014.2329940] IEEE /OSA J. Lightwave Technol., vol. 34

  2. In vivo femtosecond laser subsurface scleral treatment in rabbit eyes.

    Science.gov (United States)

    Chai, Dongyul; Chaudhary, Gautam; Mikula, Eric; Sun, Hui; Kurtz, Ron; Juhasz, Tibor

    2010-09-01

    The progression of glaucoma can be reduced or delayed by reducing intraocular pressure (IOP). The properties of femtosecond laser surgery, such as markedly reduced collateral tissue damage, coupled with the ability to achieve isolated subsurface surgical effects in the sclera, make this technology a promising candidate in glaucoma management. In this pilot study we demonstrate the in vivo creation of partial thickness subsurface drainage channels with the femtosecond laser in the sclera of rabbit eyes in order to increase aqueous humor (AH) outflow. A femtosecond laser beam tuned to a 1.7 microm wavelength was scanned along a rectangular raster pattern to create the partial thickness subsurface drainage channels in the sclera of one eye of each of the four rabbits included in this pilot study. IOP was measured before and 20 minutes after the laser treatment to evaluate the acute effect of the procedure. OCT images verified the creation of the partial thickness subsurface scleral channels in the eyes of the in vivo rabbits. Comparison of pre- and postoperative IOP measurements in treated and control eyes revealed a reduction in the intraocular pressure due to the increased rate of AH outflow resulted in by the presence of the partial thickness scleral channels. The creation of partial thickness subsurface drainage channels was demonstrated in the sclera of in vivo rabbit eyes with a 1.7 microm wavelength femtosecond laser. Reduction in IOP achieved by the partial thickness channels suggests potential utility in the treatment of elevated IOP. 2010 Wiley-Liss, Inc.

  3. Simultaneous picosecond and femtosecond solitons delivered from a nanotube-mode-locked all-fiber laser.

    Science.gov (United States)

    Han, D D; Liu, X M; Cui, Y D; Wang, G X; Zeng, C; Yun, L

    2014-03-15

    We propose a compact nanotube-mode-locked all-fiber laser that can simultaneously generate picosecond and femtosecond solitons at different wavelengths. The pulse durations of picosecond and femtosecond solitons are measured to be ∼10.6  ps and ∼466  fs, respectively. Numerical results agree well with the experimental observations and clearly reveal that the dynamic evolutions of the picosecond and femtosecond solitons are qualitatively distinct in the intracavity. Our study presents a simple, stable, low-cost, and dual-scale ultrafast-pulsed laser source suitable for practical applications in optical communications.

  4. Ultrafast energy transfer of one-dimensional excitons between carbon nanotubes: a femtosecond time-resolved luminescence study.

    Science.gov (United States)

    Koyama, Takeshi; Miyata, Yasumitsu; Asaka, Koji; Shinohara, Hisanori; Saito, Yahachi; Nakamura, Arao

    2012-01-21

    Excitation energy transfer has long been an intriguing subject in the fields of photoscience and materials science. Along with the recent progress of photovoltaics, photocatalysis, and photosensors using nanoscale materials, excitation energy transfer between a donor and an acceptor at a short distance (≤1-10 nm) is of growing importance in both fundamental research and technological applications. This Perspective highlights our recent studies on exciton energy transfer between carbon nanotubes with interwall (surface-to-surface) distances of less than ∼1 nm, which are equivalent to or shorter than the size of one-dimensional excitons in carbon nanotubes. We show exciton energy transfer in bundles of single-walled carbon nanotubes with the interwall distances of ∼0.34 and 0.9 nm (center-to-center distances ∼1.3-1.4 and 1.9 nm). For the interwall distance of ∼0.34 nm (center-to-center distance ∼1.3-1.4 nm), the transfer rate per tube from a semiconducting tube to adjacent semiconducting tubes is (1.8-1.9) × 10(12) s(-1), and that to adjacent metallic tubes is 1.1 × 10(12) s(-1). For the interwall distance of ∼0.9 nm (center-to-center distance ∼1.9 nm), the transfer rate per tube from a semiconducting tube to adjacent semiconducting tubes is 2.7 × 10(11) s(-1). These transfer rates are much lower than those predicted by the Förster model calculation based on a point dipole approximation, indicating the failure of the conventional Förster model calculations. In double-walled carbon nanotubes, which are equivalent to ideal nanoscale coaxial cylinders, we show exciton energy transfer from the inner to the outer tubes. The transfer rate between the inner and the outer tubes with an interwall distance of ∼0.38 nm is 6.6 × 10(12) s(-1). Our findings provide an insight into the energy transfer mechanisms of one-dimensional excitons.

  5. A femtosecond study of the anomaly in electron injection for dye-sensitized solar cells: the influence of isomerization employing Ru(II) sensitizers with anthracene and phenanthrene ancillary ligands.

    Science.gov (United States)

    Cheema, Hammad; Younts, Robert; Ogbose, Louis; Gautam, Bhoj; Gundogdu, Kenan; El-Shafei, Ahmed

    2015-01-28

    In this study, an intriguing difference caused by structural isomerization based on anthracene and phenanthrene stilbazole type ancillary ligands in Ru(ii) sensitizers for dye sensitized solar cells (DSCs) has been investigated using femtosecond transient absorption spectroscopy. Both anthracene and phenanthrene based sensitizers HD-7 and HD-8, respectively, resulted in a similar extinction coefficient, photophysical and thermodynamic free energy of electron injection and dye regeneration as measured by UV-Vis, excited state lifetime and cyclic voltammetry measurements, respectively. However, TiO2 adsorbed HD-7 resulted in up to 45% less photocurrent density than HD-8 although photovoltage was similar owing to comparable thermodynamic characteristics. It was obvious from the measurement of incident photon to current conversion efficiency (IPCE) that excited electrons in HD-7 are prone to internal energy loss before injection into the TiO2 conduction band. Analysis of photo-induced spectral features measured by femtosecond transient absorption spectroscopy showed that excited electrons in HD-7 are prone to ISC (intersystem crossing) much more than HD-8 and those triplet electrons are not injected into TiO2 efficiently. Interestingly, from impedance measurements, HD-7 showed higher recombination resistance than HD-8 and N719, but a shorter lifetime for electrons injected into the TiO2 conduction band.

  6. Invited Review Terahertz Transmission, Scattering, Reflection, and Absorption—the Interaction of THz Radiation with Soils

    Science.gov (United States)

    Lewis, R. A.

    2017-07-01

    Terahertz radiation has been proposed as a useful tool in the study of soils and related materials from such diverse perspectives as detection of non-metallic landmines to improving soil fertility by agricultural charcoals produced by pyrolysis of organic material. The main barrier to such applications is that soils are rather opaque at terahertz frequencies. In this article, the main findings to date on the interaction of terahertz radiation with soils are reviewed, organized around the four phenomena of terahertz: transmission, scattering, reflection, and absorption. Terahertz transmission through soils is generally low and decreases with frequency. Terahertz scattering is evident in many THz-soil interactions, as the wavelength of the radiation is of the order of the particle size. Terahertz reflection is important to communications as these develop from the GHz into the THz band. Terahertz absorption on diluted soil samples has been demonstrated to be effective in identifying soil constituents, such as aromatic compounds, and soil contaminants, such as pesticides.

  7. Regular and anomalous extraordinary optical transmission at the THz-gap.

    Science.gov (United States)

    Kuznetsov, S A; Navarro-Cía, M; Kubarev, V V; Gelfand, A V; Beruete, M; Campillo, I; Sorolla, M

    2009-07-06

    In this paper Anomalous Extraordinary Transmission (ET) is reported for s-polarization of low loss doubly periodic subwavelength hole arrays patterned on polypropylene (PP) substrates by conventional contact photolithography at the so-called THz-gap (1-10 THz). The unexpected enhanced transmittance for s-polarization (i.e. without spoof plasmons) was previously numerically demonstrated in subwavelength slits arrays. However, subsequently no experimental work has been devoted to this unexpected Extraordinary Transmission neither in subwavelength slits nor in subwavelength holes. Here, numerical study and experimental results of the Anomalous ET and the symmetric and antisymmetric transmittance modes associated with the already well-known p-polarization ET are shown alongside a systematically analysis of the frequency peaks as a function of hole size for both incident polarizations.

  8. Surface plasmon-polariton resonance at diffraction of THz radiation on semiconductor gratings

    CERN Document Server

    Spevak, I S; Gavrikov, V K; Shulga, V M; Feng, J; Sun, H B; Kamenev, Yu E; Kats, A V

    2013-01-01

    Resonance diffraction of THz HCN laser radiation on a semiconductor (InSb) grating is studied both experimentally and theoretically. The specular reflectivity suppression due to the resonance excitation of the THz surface plasmon-polariton is observed on a pure semiconductor grating and on semiconductor gratings covered with a thin striped layer of the residual photoresist. Presence of a thin dielectric layer on the grating surface leads to the shift and widening of the plasmon-polariton resonance. A simple analytical theory of the resonance diffraction on a shallow grating covered with a dielectric layer is presented. Its results are in a good accordance with the experimental data. Analytical expressions for the resonance shift and broadening can be useful for sensing data interpretation.

  9. Improved efficiency of photoconductive THz emitters by increasing the effective contact length of electrodes

    Directory of Open Access Journals (Sweden)

    Abhishek Singh

    2013-12-01

    Full Text Available We study the effect of a surface modification at the interface between metallic electrodes and semiconducting substrate in Semi-Insulating GaAs (SI-GaAs based photoconductive emitters (PCE on the emission of Tera-Hertz (THz radiation. We partially etch out a 500 nm thick layer of SI-GaAs in grating like pattern with various periods before the contact deposition. By depositing the electrodes on the patterned surface, the electrodes follow the contour of the grating period. This increases the effective contact length of the electrodes per unit area of the active regions on the PCE. The maxima of the electric field amplitude of the THz pulses emitted from the patterned surface are enhanced by up to more than a factor 2 as compared to an un-patterned surface. We attribute this increase to the increase of the effective contact length of the electrode due to surface patterning.

  10. Grating THz laser with optical pumping

    Science.gov (United States)

    Khoury, Jed; Haji-saeed, Bahareh; Woods, Charles; Kierstead, John

    2010-04-01

    In this paper, we present a design for a widely tunable solid-state optically and electrically pumped THz laser based on the Smith-Purcell free-electron laser. In the free-electron laser, an energetic electron beam pumps a metallic grating to generate surface plasmons. Our solid-state optically pumped design consists of a thin layer of dielectic, such as SiNx, sandwiched between a corrugated structure and a thin metal or semiconductor layer. The lower layer is for current streaming, and replaces the electron beam in the original design. The upper layer consists of one micro-grating for coupling the electromagnetic field in, another for coupling out, and a nano-grating for coupling with the current in the lower layer for electromagnetic field generation. The surface plasmon waves generated from the upper layer by an external electromagnetic field, and the lower layer by the applied current, are coupled. Emission enhancement occurs when the plasmonic waves in both layers are resonantly coupled.

  11. Towards large area THz electromagnetic metamaterials

    Science.gov (United States)

    Moser, H. O.; Bahou, M.; Chen, A.; Heussler, S. P.; Jian, L. K.; Kalaiselvi, S. M. P.; Liu, G.; Maniam, S. M.; bin Mahmood, Shahrain; Gu, P. D.; Wen, L.; Kong, J. A.; Chen, H. S.; Cheng, X. X.; Wu, B. I.; Casse, B. D. F.; Rockstuhl, C.; Lederer, F.

    2008-08-01

    Up to date, electromagnetic metamaterials (EM3) have been mostly fabricated by primary pattern generation via electron beam or laser writer. Such an approach is time-consuming and may have limitations of the area filled with structures. Especially, electron beam written structures are typically confined to areas of a few 100×100 μm2. However, for meaningful technological applications, larger quantities of good quality materials are needed. Lithography, in particular X-ray deep lithography, is well suited to accomplish this task. Singapore Synchrotron Light Source (SSLS) has been applying its LIGA process that includes primary pattern generation via electron beam or laser writer, X-ray deep lithography and electroplating to the micro/nano-manufacturing of high-aspect ratio structures to produce a variety of EM3 structures. Starting with Pendry's split ring resonators, we have pursued structure designs suitable for planar lithography since 2002 covering a range of resonance frequencies from 1 to 216 THz. More recently, string-like structures have also been included. Latest progress made in the manufacturing and characterization of quasi 3D metamaterials having either split ring or string structures over areas of about ~1 cm2 extension will be described.

  12. THz spectroscopic investigation of chlorotoluron by solid-state density functional theory

    Science.gov (United States)

    Wang, Qiang; Wang, H. L.

    2012-05-01

    The terahertz time-domain spectrum (THz-TDS) of chlorotoluron has been simulated and assigned with solid-state density functional theory (DFT) in the range of 0.5-2.2 THz. The calculations based on the hybrid density functionals B3LYP and PW91 are performed to analyze the origins of observed spectral features in chlorotoluron THz spectra of solid-state forms using the software package CRYSTAL09. The computed THz spectrum of the B3LYP provides better agreements with observed THz spectral characters. Moreover, all the experimental THz absorption peaks are assigned utilizing the B3LYP method.

  13. [Reseach on THz Time Domain Spectrum of Photo-Induced Insulator-Metal Phase Transition of VO₂ Films].

    Science.gov (United States)

    Wang, Chang-lei; Wu, Shuai; Li, Yan-feng; Liu, Bo-wen; Hu, Ming-lie; Chai, Lu; Xing, Qi-rong; Wang, Qing-yue

    2015-11-01

    Vanadium dioxide (VO₂) film will be phase-transitioned from insulator into metal, accompanied with dramatic change on conductivity, which is named as photo-induced insulator-metal phase transition. Such phase transition of VO₂ film has important application potentials in modulators or other functional devices for terahertz waves. In this paper, the transmission spectrum variations before and after the photo-induced insulator-metal phase transition of vanadium dioxide film are investigated, and the phase transition properties in terahertz(THz) region are analyzed. In the experiment, the phase transition of the VO₂ film was induced by a continuous wave (CW) laser source and a femtosecond (fs) laser source, respectively. Obvious changes on the THz waveforms were observed for the both mentioned means of excitation, and the amplitude attenuation, as well as the signal distortion, was intensified with the increase of the impinging optical power. The fast Fourier transform (FFT) spectra of the transmitted THz time-domain signals were analyzed and it was found that the amplitude of the transmitted spectrum decreased synchronously with the increase of the optical power, accompanied with deformation of the spectrum line shape at the same time. The reason was that the macroscopic dielectric properties of the VO₂ film approached gradually to that of a metal as laser power was increased. A parameter, transmission modulation function, was defined in the paper as the amplitude difference between the transmission spectra of the VO₂ film before and after the laser excitation, to describe the dispersivity of the photo-induced phase transition more clearly. From the curve of the transmission modulation function, strong frequency-dependent properties at THz frequencies were found to vary regularly with the incident light power. After furthermore comparison, it was found that, though the insulator-metal phase transition could be trigged by both CW laser source and fs laser

  14. Femtosecond Laser Desorption of Thin Polymer Films from a Dielectric Surface

    Directory of Open Access Journals (Sweden)

    Mercadier L.

    2013-11-01

    Full Text Available We desorb polymer films from fused silica with a femtosecond laser and characterize the results by atomic force microscopy. Our study as a function of beam geometry and energy reveals two ways of achieving spatially controlled nanodesorption.

  15. Giantically blue-shifted visible light in femtosecond mid-IR filament in fluorides

    CERN Document Server

    Dormidonov, A E; Chekalin, S V; Kandidov, V P

    2015-01-01

    A giant blue shift of an isolated visible band of supercontinuum was discovered and studied in the single filament regime of Mid-IR femtosecond laser pulse at powers slightly exceeding critical power for self-focusing in fluorides.

  16. Selective deactivation of M13 bacteriophage in E. Coli using femtosecond laser pulses

    CSIR Research Space (South Africa)

    Molukanele, P

    2011-09-01

    Full Text Available Potential for the selective deactivation of viruses while leaving the sensitive material such as the host cell unharmed was studied using a femtosecond laser system, and preliminary results are reported....

  17. A multi-milliJoule femtosecond Raman laser emitting at 1.28 um

    CERN Document Server

    Vicario, Carlo; Konyashchenko, Aleksandr; Losev, Leonid; Hauri, Christoph P

    2016-01-01

    We report on the generation of broadband, high-energy femtosecond pulses centered at 1.28 um by stimulated Raman scattering in pressurized hydrogen cell. Stimulated Raman scattering is performed by two chirped and delayed pulses originating from a multi-mJ Ti:Sapphire amplifier. The Stokes pulse carries energy of 4.4 mJ and is recompressed down to 66 fs by reflective grating pair. We characterized the short-wavelength mid-infrared source in view of energy stability, beam profile and conversion efficiency at a repetition rate of 100 Hz and 10 Hz. The demonstrated laser will benefit intense THz generation applications from highly nonlinear organic crystals.

  18. Femtosecond measurements of electric fields: from classical amplitudes to quantum fluctuations

    Science.gov (United States)

    Riek, Claudius; Seletskiy, Denis V.; Leitenstorfer, Alfred

    2017-03-01

    Ultrabroadband electro-optic sampling is presented as an extremely sensitive technique to detect electric field amplitudes in free space. The temporal resolution provided by few-femtosecond laser pulses results in a bandwidth exceeding 100 THz, potentially covering the entire infrared spectral range. A pedagogic introduction to the operational principle of the method is given along the lines of a classical coherent input field and a zincblende-type electro-optic sensor. We then show that even the bare vacuum fluctuations of the electric field in the quantum ground state may be detected. This time-domain approach to quantum physics operates directly on sub-cycle scales where no local energy conservation holds. Therefore, signals may be obtained from purely virtual photons without amplification to finite intensity.

  19. Composite THz materials using aligned metallic and semiconductor microwires, experiments and interpretation.

    Science.gov (United States)

    Mazhorova, Anna; Gu, Jian Feng; Dupuis, Alexandre; Peccianti, Marco; Tsuneyuki, Ozaki; Morandotti, Roberto; Minamide, Hiroaki; Tang, Ming; Wang, Yuye; Ito, Hiromasa; Skorobogatiy, Maksim

    2010-11-22

    We report fabrication method and THz characterization of composite films containing either aligned metallic (tin alloy) microwires or chalcogenide As2Se3 microwires. The microwire arrays are made by stack-and-draw fiber fabrication technique using multi-step co-drawing of low-melting-temperature metals or semiconductor glasses together with polymers. Fibers are then stacked together and pressed into composite films. Transmission through metamaterial films is studied in the whole THz range (0.1-20 THz) using a combination of FTIR and TDS. Metal containing metamaterials are found to have strong polarizing properties, while semiconductor containing materials are polarization independent and could have a designable high refractive index. Using the transfer matrix theory, we show how to retrieve the complex polarization dependent refractive index of the composite films. Finally, we study challenges in the fabrication of metamaterials with sub-micrometer metallic wires by repeated stack-and-draw process by comparing samples made using 2, 3 and 4 consecutive drawings. When using metallic alloys we observe phase separation effects and nano-grids formation on small metallic wires.

  20. Possible standoff detection of ionizing radiation using high-power THz electromagnetic waves

    Science.gov (United States)

    Nusinovich, Gregory S.; Sprangle, Phillip; Romero-Talamas, Carlos A.; Rodgers, John; Pu, Ruifeng; Kashyn, Dmytro G.; Antonsen, Thomas M., Jr.; Granatstein, Victor L.

    2012-06-01

    Recently, a new method of remote detection of concealed radioactive materials was proposed. This method is based on focusing high-power short wavelength electromagnetic radiation in a small volume where the wave electric field exceeds the breakdown threshold. In the presence of free electrons caused by ionizing radiation, in this volume an avalanche discharge can then be initiated. When the wavelength is short enough, the probability of having even one free electron in this small volume in the absence of additional sources of ionization is low. Hence, a high breakdown rate will indicate that in the vicinity of this volume there are some materials causing ionization of air. To prove this concept a 0.67 THz gyrotron delivering 200-300 kW power in 10 microsecond pulses is under development. This method of standoff detection of concealed sources of ionizing radiation requires a wide range of studies, viz., evaluation of possible range, THz power and pulse duration, production of free electrons in air by gamma rays penetrating through container walls, statistical delay time in initiation of the breakdown in the case of low electron density, temporal evolution of plasma structure in the breakdown and scattering of THz radiation from small plasma objects. Most of these issues are discussed in the paper.

  1. THz near-field imaging of biological tissues employing synchrotronradiation

    Energy Technology Data Exchange (ETDEWEB)

    Schade, Ulrich; Holldack, Karsten; Martin, Michael C.; Fried,Daniel

    2004-12-23

    Terahertz scanning near-field infrared microscopy (SNIM) below 1 THz is demonstrated. The near-field technique benefits from the broadband and highly brilliant coherent synchrotron radiation (CSR) from an electron storage ring and from a detection method based on locking onto the intrinsic time structure of the synchrotron radiation. The scanning microscope utilizes conical wave guides as near-field probes with apertures smaller than the wavelength. Different cone approaches have been investigated to obtain maximum transmittance. Together with a Martin-Puplett spectrometer the set-up enables spectroscopic mapping of the transmittance of samples well below the diffraction limit. Spatial resolution down to about lambda/40 at 2 wavenumbers (0.06 THz) is derived from the transmittance spectra of the near-field probes. The potential of the technique is exemplified by imaging biological samples. Strongly absorbing living leaves have been imaged in transmittance with a spatial resolution of 130 mu-m at about 12 wave numbers (0.36 THz). The THz near-field images reveal distinct structural differences of leaves from different plants investigated. The technique presented also allows spectral imaging of bulky organic tissues. Human teeth samples of various thicknesses have been imaged between 2 and 20 wavenumbers (between 0.06and 0.6 THz). Regions of enamel and dentin within tooth samples are spatially and spectrally resolved, and buried caries lesions are imaged through both the outer enamel and into the underlying dentin.

  2. Femtosecond laser enabled keratoplasty for advanced keratoconus

    Directory of Open Access Journals (Sweden)

    Yathish Shivanna

    2013-01-01

    Full Text Available Purpose : To assess the efficacy and advantages of femtosecond laser enabled keratoplasty (FLEK over conventional penetrating keratoplasty (PKP in advanced keratoconus. Materials and Methods: Detailed review of literature of published randomized controlled trials of operative techniques in PKP and FLEK. Results: Fifteen studies were identified, analyzed, and compared with our outcome. FLEK was found to have better outcome in view of better and earlier stabilization uncorrected visual acuity (UCVA, best corrected visual acuity (BCVA, and better refractive outcomes with low astigmatism as compared with conventional PKP. Wound healing also was noticed to be earlier, enabling early suture removal in FLEK. Conclusions: Studies relating to FLEK have shown better results than conventional PKP, however further studies are needed to assess the safety and intraoperative complications of the procedure.

  3. Growth, defect structure, and THz application of stoichiometric lithium niobate

    Science.gov (United States)

    Lengyel, K.; Péter, Á.; Kovács, L.; Corradi, G.; Pálfalvi, L.; Hebling, J.; Unferdorben, M.; Dravecz, G.; Hajdara, I.; Szaller, Zs.; Polgár, K.

    2015-12-01

    Owing to the extraordinary richness of its physical properties, congruent lithium niobate has attracted multidecade-long interest both for fundamental science and applications. The combination of ferro-, pyro-, and piezoelectric properties with large electro-optic, acousto-optic, and photoelastic coefficients as well as the strong photorefractive and photovoltaic effects offers a great potential for applications in modern optics. To provide powerful optical components in high energy laser applications, tailoring of key material parameters, especially stoichiometry, is required. This paper reviews the state of the art of growing large stoichiometric LiNbO3 (sLN) crystals, in particular, the defect engineering of pure and doped sLN with emphasis on optical damage resistant (ODR) dopants (e.g., Mg, Zn, In, Sc, Hf, Zr, Sn). The discussion is focused on crystals grown by the high temperature top seeded solution growth (HTTSSG) technique using alkali oxide fluxing agents. Based on high-temperature phase equilibria studies of the Li2O-Nb2O5-X2O ternary systems (X = Na, K, Rb, Cs), the impact of alkali homologue additives on the stoichiometry of the lithium niobate phase will be analyzed, together with a summary of the ultraviolet, infrared, and far-infrared absorption spectroscopic methods developed to characterize the composition of the crystals. It will be shown that using HTTSSG from K2O containing flux, crystals closest to the stoichiometric composition can be grown characterized by a UV-edge position of at about 302 nm and a single narrow hydroxyl band in the IR with a linewidth of less than 3 cm-1 at 300 K. The threshold concentrations for ODR dopants depend on crystal stoichiometry and the valence of the dopants; Raman spectra, hydroxyl vibration spectra, and Z-scan measurements prove to be useful to distinguish crystals below and above the photorefractive threshold. Crystals just above the threshold are preferred for most nonlinear optical applications apart

  4. Simulation of metallic nanostructures for emission of THz radiation using the lateral photo-Dember effect

    CERN Document Server

    McBryde, Duncan; Daniell, Geoff J; Chung, Aaron L; Mihoubi, Zakaria; Quarterman, Adrian H; Wilcox, Keith G; Tropper, Anne C; Apostolopoulos, Vasilis; 10.1109/irmmw-THz.2011.6104994

    2012-01-01

    A 2D simulation for the lateral photo-Dember effect is used to calculate the THz emission of metallic nanostructures due to ultrafast diffusion of carriers in order to realize a series of THz emitters.

  5. 80 Gbit/s 16-QAM Multicarrier THz Wireless Communication Link in the 400 GHz Band

    DEFF Research Database (Denmark)

    Jia, Shi; Yu, Xianbin; Hu, Hao;

    2016-01-01

    We experimentally demonstrate a high-speed multicarrier THz wireless communication system operating in the 400 GHz band. The use of spectrally efficient 16-QAM modulation and broadband THz transceivers enable link data rates up to 80 Gbit/s....

  6. NATO Advanced Research Workshop on THz for CBRN and Explosives Detection and Diagnosis

    CERN Document Server

    Shulika, Oleksiy

    2017-01-01

    This work is intended to jointly address the development, realization and applications of emitters and detectors of terahertz (THz-0.3 THz up to 10 THz) and their application to diagnostics of CBRN effects and detection of explosives and CBRN. Hazardous substances typically exhibit rotational and vibrational transitions in this region, hence giving access to spectroscopic analysis of a large variety of molecules which play a key role in security as well as various other areas, e.g. air pollution, climate research, industrial process control, agriculture, food industry, workplace safety and medical diagnostics can be monitored by sensing and identifying them via THz (0.3 to 10 THz) and mid infrared (MIR-10 THz to 100 THz) absorption “finger prints”. Most plastics, textiles and paper are nearly transparent for THz radiation.

  7. Effect of electron heating on femtosecond laser-induced coherent acoustic phonons in noble metals

    Science.gov (United States)

    Wang, Jincheng; Guo, Chunlei

    2007-05-01

    We employ a surface plasmon technique to resolve the dynamics of femtosecond-laser-induced coherent acoustic phonons in noble metals. Clear acoustic oscillations are observed in our experiments. We further study the dependence of the initial phase of the oscillations on pump fluence, and we find that the initial phase decreases linearly with pump fluence. Our model calculations show that hot electrons instantaneously excited by femtosecond pulses contribute to the generation of coherent acoustic phonons in metals.

  8. Current responsivity of semiconductor superlattice THz-photon detectors

    DEFF Research Database (Denmark)

    Ignatov, Anatoly A.; Jauho, Antti-Pekka

    1999-01-01

    The current responsivity of a semiconductor superlattice THz-photon detector is calculated using an equivalent circuit model which takes into account the finite matching efficiency between a detector antenna and the superlattice in the presence of parasitic losses. Calculations performed for curr......The current responsivity of a semiconductor superlattice THz-photon detector is calculated using an equivalent circuit model which takes into account the finite matching efficiency between a detector antenna and the superlattice in the presence of parasitic losses. Calculations performed...... for currently available superlattice diodes show that both the magnitudes and the roll-off frequencies of the responsivity are strongly influenced by an excitation of hybrid plasma-Bloch oscillations which are found to be eigenmodes of the system in the THz-frequency band. The expected room temperature values...

  9. THz generation using a reflective stair-step echelon

    CERN Document Server

    Ofori-Okai, Benjamin K; Huang, W Ronny; Nelson, Keith A

    2015-01-01

    We present a novel method for THz generation in lithium niobate using a reflective stair-step echelon structure. The echelon produces a discretely tilted pulse front with less angular dispersion compared to a high groove-density grating. The THz output was characterized using both a 1-lens and 3-lens imaging system to set the tilt angle at room and cryogenic temperatures. Using broadband 800 nm pulses with a pulse energy of 0.95 mJ and a pulse duration of 70 fs (24 nm FWHM bandwidth, 39 fs transform limited width), we produced THz pulses with field strengths as high as 500 kV/cm and pulse energies as high as 3.1 $\\mu$J. The highest conversion efficiency we obtained was 0.33%. In addition, we find that the echelon is easily implemented into an experimental setup for quick alignment and optimization.

  10. Filling the THz Gap - High Power Sources and Applications

    Energy Technology Data Exchange (ETDEWEB)

    Gwyn Williams

    2006-02-01

    Electromagnetic waves centered at a frequency of 1 THz lie between photonics on the one hand and electronics on the other, and are very hard to generate and detect. However, since the THz part of the spectrum is energetically equivalent to many important physical, chemical and biological processes including superconducting gaps and protein dynamical processes, it is of great interest to facilitate experimental research in this region. This has stimulated major steps in the past decade for filling this gap in the usable spectrum. In this review paper we describe the evolution of a new generation of sources that boost the average power available in the THz region by more than a million-fold, making this region routinely accessible for the first time. This is achieved using two enhancement factors, namely relativistic electrons and super-radiance. We will also point to the scientific potential for discovery that is now enabled in this region.

  11. Filling the THz gap-high power sources and applications

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Gwyn P [Jefferson Lab, 12000 Jefferson Avenue, Newport News VA 23606 (United States)

    2006-02-01

    Electromagnetic waves centred at a frequency of 1 THz lie between photonics on the one hand and electronics on the other, and are very hard to generate and detect. However, since the THz part of the spectrum is energetically equivalent to many important physical, chemical and biological processes including superconducting gaps and protein dynamical processes, it is of great interest to facilitate experimental research in this region. This has stimulated major steps in the past decade for filling this gap in the usable spectrum. In this review paper we describe the evolution of a new generation of sources that boost the average power available in the THz region by more than a million-fold, making this region routinely accessible for the first time. This is achieved using two enhancement factors, namely relativistic electrons and super-radiance. We will also point to the scientific potential for discovery that is now enabled in this region.

  12. Fiber-Drawn Metamaterial for THz Waveguiding and Imaging

    Science.gov (United States)

    Atakaramians, Shaghik; Stefani, Alessio; Li, Haisu; Habib, Md. Samiul; Hayashi, Juliano Grigoleto; Tuniz, Alessandro; Tang, Xiaoli; Anthony, Jessienta; Lwin, Richard; Argyros, Alexander; Fleming, Simon C.; Kuhlmey, Boris T.

    2017-09-01

    In this paper, we review the work of our group in fabricating metamaterials for terahertz (THz) applications by fiber drawing. We discuss the fabrication technique and the structures that can be obtained before focusing on two particular applications of terahertz metamaterials, i.e., waveguiding and sub-diffraction imaging. We show the experimental demonstration of THz radiation guidance through hollow core waveguides with metamaterial cladding, where substantial improvements were realized compared to conventional hollow core waveguides, such as reduction of size, greater flexibility, increased single-mode operating regime, and guiding due to magnetic and electric resonances. We also report recent and new experimental work on near- and far-field THz imaging using wire array metamaterials that are capable of resolving features as small as λ/28.

  13. Computed tomography using broadband Bessel THz beams and phase contrast.

    Science.gov (United States)

    Bitman, Assaf; Goldring, Sharone; Moshe, Inon; Zalevsky, Zeev

    2014-04-01

    We present new results demonstrating the capability of performing computed tomography (CT) using broadband Bessel terahertz (THz) beams. Nondiffractive beams such as these exhibit propagation-invariant lines of focus with an extended depth-of-field compared to conventional Gaussian beams. Using this property, we demonstrate a considerable improvement in the 3D reconstruction image of a synthetic sample through the backprojection algorithm. Only when THz Bessel beams are used, a full reconstruction of the object structure is made. Moreover, we use phase-contrast mechanism which improves the spatial resolution and reconstructed images. Our results highlight the potential in using nondiffractive Bessel beams to significantly improve 3D-image reconstruction of THz CT.

  14. Coherent Cherenkov radiation as an intense THz source

    Science.gov (United States)

    Bleko, V.; Karataev, P.; Konkov, A.; Kruchinin, K.; Naumenko, G.; Potylitsyn, A.; Vaughan, T.

    2016-07-01

    Diffraction and Cherenkov radiation of relativistic electrons from a dielectric target has been proposed as mechanism for production of intense terahertz (THz) radiation. The use of an extremely short high-energy electron beam of a 4th generation light source (X-ray free electron laser) appears to be very promising. A moderate power from the electron beam can be extracted and converted into THz radiation with nearly zero absorption losses. The initial experiment on THz observation will be performed at CLARA/VELA FEL test facility in the UK to demonstrate the principle to a wider community and to develop the radiator prototype. In this paper, we present our theoretical predictions (based on the approach of polarization currents), which provides the basis for interpreting the future experimental measurements. We will also present our hardware design and discuss a plan of the future experiment.

  15. Active tunable plasmonically induced polarization conversion in the THz regime

    Science.gov (United States)

    Ling, Furi; Yao, Gang; Yao, Jianquan

    2016-01-01

    A plasmon-induced polarization conversion (PIPC) structure based on periodically patterned graphene was demonstrated in the THz regime. By varying the Fermi level of two connected T-shape graphene strips through the electrostatic gating, the peak frequency and the group index in the transparency window can be tuned, which is good agreement with the coupled Lorentz oscillator model. Due to interference between two polarization selective graphene plasmonic resonances coexisting in the planar metamaterial, polarization conversion can be achieved. The linearly polarized THz wave can be converted to elliptically and right circularly polarized THz wave through varying the relaxation time of electrons in graphene. This novel chip-scale active terahertz device promises essential application opportunities in terahertz sensing and terahertz communications. PMID:27734912

  16. Geometrical Aberration Suppression for Large Aperture Sub-THz Lenses

    Science.gov (United States)

    Rachon, M.; Liebert, K.; Siemion, A.; Bomba, J.; Sobczyk, A.; Knap, W.; Coquillat, D.; Suszek, J.; Sypek, M.

    2017-03-01

    Advanced THz setups require high performance optical elements with large numerical apertures and small focal lengths. This is due to the high absorption of humid air and relatively low efficiency of commercially available detectors. Here, we propose a new type of double-sided sub-THz diffractive optical element with suppressed geometrical aberration for narrowband applications (0.3 THz). One side of the element is designed as thin structure in non-paraxial approach which is the exact method, but only for ideally flat elements. The second side will compensate phase distribution differences between ideal thin structure and real volume one. The computer-aided optimization algorithm is performed to design an additional phase distribution of correcting layer assuming volume designing of the first side of the element. The experimental evaluation of the proposed diffractive component created by 3D printing technique shows almost two times larger performance in comparison with uncorrected basic diffractive lens.

  17. Temperature-dependent THz vibrational spectra of clenbuterol hydrochloride

    Science.gov (United States)

    Yang, YuPing; Lei, XiangYun; Yue, Ai; Zhang, Zhenwei

    2013-04-01

    Using the high-resolution Terahertz Time-domain spectroscopy (THz-TDS) and the standard sample pellet technique, the far-infrared vibrational spectra of clenbuterol hydrochloride (CH), a β 2-adrenergic agonist for decreasing fat deposition and enhancing protein accretion, were measured in temperature range of 77-295 K. Between 0.2 and 3.6 THz (6.6-120.0 cm-1), seven highly resolved spectral features, strong line-narrowing and a frequency blue-shift were observed with cooling. However, ractopamine hydrochloride, with some structural and pharmacological similarities to clenbuterol hydrochloride, showed no spectral features, indicating high sensitivity and strong specificity of THz-TDS. These results could be used for the rapid and nondestructive CH residual detection in food safety control.

  18. New developments in THz quartz enhanced photoacoustic spectroscopy

    Science.gov (United States)

    Spagnolo, Vincenzo; Patimisco, Pietro; Sampaolo, Angelo; Giglio, Marilena; Vitiello, Miriam S.; Scamarcio, Gaetano; Tittel, Frank K.

    2016-09-01

    We will report on new developments of quartz-enhanced photo-acoustic (QEPAS) sensor employing THz quantum cascade laser (QCLs). The extension of the QEPAS technique in the THz range was made possible by the realization of custom made QTFs. With the aim to improve the QTF acousto-electric transduction efficiency, we designed and realized new QTF designs. A detailed analysis of the quality factor, the resonance frequency and the electrical resistance of custom quartz tuning forks (QTFs) with different geometrical parameters is reported. The custom QTFs were employed in QEPAS sensors using THz QCLs as the laser excitation sources and targeting CH3OH and H2S. Minimum detection limits of a few tens of ppb and normalized noise equivalent absorption factors down to 3.75×10-11 cm-1W/Hz½ were achieved.

  19. Radiative Characteristics of On-Chip Terahertz (THz) Structures

    Energy Technology Data Exchange (ETDEWEB)

    Hussein, Yasser A.; Spencer, James E.; /SLAC

    2005-06-07

    Previously, we explored possibilities for producing narrow-band THz radiation using either free or bound electrons (solid state) in micro-undulatory configurations [1] because integrated circuit technology appeared well matched to this region extending from about 300 GHz to 30 THz. This range [2]-[3] has largely been neglected until recently because it runs from the limit of WR-3 waveguide around 300 GHz up to CO{sub 2} lasers where the laser regime becomes dominant. There are mainly two approaches for generating THz radiation, i.e. through free or bound electron (BE) implementations. In this paper, emphasis is on producing this radiation using bound electrons via IC technology but in close analogy to free electron lasers (FELs) that are comparatively immense, expensive, need high power and have low efficiencies [4].

  20. Geometrical Aberration Suppression for Large Aperture Sub-THz Lenses

    Science.gov (United States)

    Rachon, M.; Liebert, K.; Siemion, A.; Bomba, J.; Sobczyk, A.; Knap, W.; Coquillat, D.; Suszek, J.; Sypek, M.

    2016-11-01

    Advanced THz setups require high performance optical elements with large numerical apertures and small focal lengths. This is due to the high absorption of humid air and relatively low efficiency of commercially available detectors. Here, we propose a new type of double-sided sub-THz diffractive optical element with suppressed geometrical aberration for narrowband applications (0.3 THz). One side of the element is designed as thin structure in non-paraxial approach which is the exact method, but only for ideally flat elements. The second side will compensate phase distribution differences between ideal thin structure and real volume one. The computer-aided optimization algorithm is performed to design an additional phase distribution of correcting layer assuming volume designing of the first side of the element. The experimental evaluation of the proposed diffractive component created by 3D printing technique shows almost two times larger performance in comparison with uncorrected basic diffractive lens.

  1. Investigation of interaction femtosecond laser pulses with skin and eyes mathematical model

    Science.gov (United States)

    Rogov, P. U.; Smirnov, S. V.; Semenova, V. A.; Melnik, M. V.; Bespalov, V. G.

    2016-08-01

    We present a mathematical model of linear and nonlinear processes that takes place under the action of femtosecond laser radiation on the cutaneous covering. The study is carried out and the analytical solution of the set of equations describing the dynamics of the electron and atomic subsystems and investigated the processes of linear and nonlinear interaction of femtosecond laser pulses in the vitreous of the human eye, revealed the dependence of the pulse duration on the retina of the duration of the input pulse and found the value of the radiation power density, in which there is a self-focusing is obtained. The results of the work can be used to determine the maximum acceptable energy, generated by femtosecond laser systems, and to develop Russian laser safety standards for femtosecond laser systems.

  2. THz Communications using Photonics and Electronic Devices: the Race to Data-Rate

    Science.gov (United States)

    Ducournau, Guillaume; Szriftgiser, Pascal; Pavanello, Fabio; Peytavit, Emilien; Zaknoune, Mohammed; Bacquet, Denis; Beck, Alexandre; Akalin, Tahsin; Lampin, Jean-François; Lampin, Jean-François

    2015-02-01

    With the mass development of mobile data transfers, wireless communications have recently entered a new area: the carrier frequency is now entering the THz region. After a brief overview of context and key features of THz communication, focus is given on photonic-based THz emitters based on quasi-optic UTC-PDs. A special design of wideband photomixer is presented and its applications for narrow bandwidth THz generation. Using this photomixer, communication links at 200, 400 and 600 GHz are presented.

  3. Experimental analysis of THz receiver performance in 80 Gbit/s communication system

    DEFF Research Database (Denmark)

    Jia, Shi; Yu, Xianbin; Hu, Hao

    2016-01-01

    We experimentally analyze the performance of Schottky mixer-based THz receiver in a high-speed THz wireless transmission system incorporating an ultra-broadband uni-travelling carrier photodiode (UTC-PD) as photo-mixing emitter. The multi-channel photonic THz wireless system operates in the 375–4...... in the receiver however severely affects the receiver bandwidth and induces the performance degradation of THz wireless communication systems....

  4. Temperature and magnetic field dependence of rare -earth ↔iron exchange resonance mode in a magnetic oxide studied with femtosecond magneto-optical Kerr effect

    Science.gov (United States)

    Deb, Marwan; Molho, Pierre; Barbara, Bernard; Bigot, Jean-Yves

    2016-08-01

    In magnetic materials, the exchange is the strongest quantum interaction due to the Pauli exclusion principle. For that reason it can induce high-frequency modes fexch of the magnetization precession. In this work we investigate these modes over a wide range of temperatures (50 -300 K ) and magnetic fields up to 10 T in a bismuth-doped garnet with perpendicular magnetic anisotropy by performing femtosecond magneto-optical pump-probe experiments. Near the compensation temperature TM the divergence of 1 /fexch(T ) allows identifying unambiguously fexch with the rare-earth ↔ iron exchange mode. In addition, at low temperature fexch is independent of the field as usually observed. In contrast, we find that near TM,fexch decreases linearly with an increasing magnetic field. This behavior is explained in the context of the ferromagnetic resonance theory by including the perturbation term linear in the external applied field Hext.

  5. Assessing solvent effects on the singlet excited state lifetime of uracil derivatives: A femtosecond fluorescence upconversion study in alcohols and D{sub 2}O

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, Thomas [Laboratoire Francis Perrin, CEA/DSM/DRECAM/SPAM - CNRS URA 2453, CEA/Saclay, F-91191 Gif-sur-Yvette (France)], E-mail: thomas.gustavsson@cea.fr; Banyasz, Akos [Laboratoire Francis Perrin, CEA/DSM/DRECAM/SPAM - CNRS URA 2453, CEA/Saclay, F-91191 Gif-sur-Yvette (France); Sarkar, Nilmoni [Department of Chemistry, Indian Institute of Technology, Kharagpur 721 302, WB (India); Markovitsi, Dimitra [Laboratoire Francis Perrin, CEA/DSM/DRECAM/SPAM - CNRS URA 2453, CEA/Saclay, F-91191 Gif-sur-Yvette (France); Improta, Roberto [Dipartimento di Chimica, Universita Federico II, Complesso Universitario Monte S. Angelo, Via Cintia, I-80126 Napoli (Italy); Istituto Biostrutture e Bioimmagini/CNR, V. Mezzocannone 6 - 80134 Napoli (Italy)

    2008-06-23

    The excited state lifetimes of uracil, thymine and 5-fluorouracil have been measured using femtosecond UV fluorescence upconversion in various protic and aprotic polar solvents. The fastest decays are observed in acetonitrile and the slowest in aqueous solution while those observed in alcohols are intermediate. No direct correlation with macroscopic solvent parameters such as polarity or viscosity is found, but hydrogen bonding is one key factor affecting the fluorescence decay. It is proposed that the solvent modulates the relative energy of two close-lying electronically excited states, the bright {pi}{pi}* and the dark n{pi}* states. This relative energy gap controls the non-radiative relaxation of the {pi}{pi}* state through a conical intersection close to the Franck-Condon region competing with the ultrafast internal conversion to the ground state. In addition, an inverse isotope effect is observed in D{sub 2}O where the decays are faster than in H{sub 2}O.

  6. Low-loss rotated porous core hexagonal single-mode fiber in THz regime

    DEFF Research Database (Denmark)

    Islam, Raonaqul; Hasanuzzaman, G.K.M.; Habib, Selim;

    2015-01-01

    A kind of porous core photonic crystal fiber (PCF) for terahertz (THz) wave propagation is proposed in thispaper. By intentionally rotating the porous core lattice structure, a dispersion of 1.06 ± 0.12 ps/THz/cm ina frequency range of 0.5–1.08 THz is observed. Also, a very low material absorption...

  7. Nonlinear propagation of strong-field THz pulses in doped semiconductors

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Hvam, Jørn Märcher; Hoffmann, Matthias C.

    2012-01-01

    We report on nonlinear propagation of single-cycle THz pulses with peak electric fields reaching 300 kV/cm in n-type semiconductors at room temperature. Dramatic THz saturable absorption effects are observed in GaAs, GaP, and Ge, which are caused by the nonlinear electron transport in THz fields....

  8. Optimization design of optical waveguide control by nanoslit-enhanced THz field

    DEFF Research Database (Denmark)

    Novitsky, Andrey; Malureanu, Radu; Zalkovskij, Maksim;

    2013-01-01

    We discuss design issues of devices which were proposed recently [Opt. Lett. 37 (2012) 3903] for terahertz (THz) control of the propagation of an optical waveguide mode. The mode propagates through a nonlinear dielectric material placed in a metallic nanoslit illuminated by THz radiation. The THz...

  9. Graphene-based THz modulator analyzed by equivalent circuit model

    DEFF Research Database (Denmark)

    Xiao, Binggang; Chen, Jing; Xie, Zhiyi;

    2016-01-01

    A terahertz (THz) modulator based on graphene is proposed and analysed by use of equivalent transmission line of a homogeneous mediumand the local anisotropic model of the graphene conductivity. The result calculated by the equivalent circuit is consistent with that obtained byFresnel transfer...... matrices. For the modulator proposed here, when the frequency of carrier wave is 0.6 THz, the theoretical analysis indicatesthat the modulation bandwidth is 55.5 kHz and the modulation depth is 81.3% for voltage change from 0 to 50 V...

  10. Terahertz Transmission Imaging with 2.52 THz Continuous Wave

    Institute of Scientific and Technical Information of China (English)

    Xiao-Tong Guan; De-Wei Zheng; Min Hu; Wen-Jie Fu; Yu-Meng Cui; Xiang Fan; Liang Zhang; Ye Yuan; Jing-Yuan Xu; Yuan Li

    2013-01-01

    In this article, two terahertz transmission imaging systems are built with a 2.52 THz continuous wave laser and two types of sensors. One is array scanning system using a 124×124 pyro-electric array camera as the detector; the other is a point-wise scanning system utilizing a Golay cell as the detector. The imaging speed and quality is briefly analyzed. Terahertz (THz) imaging results demonstrate that the array scanning system has higher imaging speed with lower resolution. The point-wise scanning system has higher imaging quality with lower speed.

  11. A new artificial material approach for flat THz frequency lenses

    CERN Document Server

    Savini, Giorgio; Zhang, Jin; 10.1364/OE.20.025766

    2012-01-01

    Stacked layers of metal meshes embedded in a dielectric substrate are routinely used for providing spectral selection at THz frequencies. Recent work has shown that particular geometries allow the refractive index to be tuned to produce practical artificial materials. Here we show that by spatially grading in the plane of the mesh we can manufacture a Graded Index (GrIn) thin flat lens optimized for use at THz frequencies. Measurements on a prototype lens show we are able to obtain the parabolic profile of a Woods type lens which is dependent only on the mesh parameters. This technique could realize other exotic optical devices.

  12. Optical and THz reflectance investigations of organic solar cells

    Science.gov (United States)

    Sporea, Dan; Mihai, Laura; Sporea, Adelina; Galagan, Yulia

    2016-04-01

    Two Organic Photovoltaic devices having a photoactive layer containing Poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5- (4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM, 99%), and the layer sequences - glass/ITO/ZnO/PAL/PEDOT:PSS/Ag/encapsulation were non-destructively investigated by diffuse optical spectral reflectance, THz spectroscopy and THz imaging. The proposed methods proved to be powerful tools to support quality assurance in organic solar cells development, facilitating both the localization of manufacturing defects and the device degradation, as they are combined with "classical" evaluation means.

  13. Tunable graphene antennas for selective enhancement of THz-emission

    KAUST Repository

    Filter, Robert

    2013-01-01

    In this paper, we will introduce THz graphene antennas that strongly enhance the emission rate of quantum systems at specific frequencies. The tunability of these antennas can be used to selectively enhance individual spectral features. We will show as an example that any weak transition in the spectrum of coronene can become the dominant contribution. This selective and tunable enhancement establishes a new class of graphene-based THz devices, which will find applications in sensors, novel light sources, spectroscopy, and quantum communication devices. © 2013 Optical Society of America.

  14. Tunable Graphene Antennas for Selective Enhancement of THz-Emission

    CERN Document Server

    Filter, R; Steglich, M; Alaee, R; Rockstuhl, C; Lederer, F

    2012-01-01

    In this paper, we will introduce THz graphene antennas that strongly enhance the emission rate of quantum systems at specific frequencies. The tunability of these antennas can be used to selectively enhance individual spectral features. We will show as an example that any weak transition in the spectrum of coronene can become the dominant contribution. This selective and tunable enhancement establishes a new class of graphene-based THz devices, which will find applications in sensors, novel light sources, spectroscopy, and quantum communication devices.

  15. Independent component analysis applications on THz sensing and imaging

    Science.gov (United States)

    Balci, Soner; Maleski, Alexander; Nascimento, Matheus Mello; Philip, Elizabath; Kim, Ju-Hyung; Kung, Patrick; Kim, Seongsin M.

    2016-05-01

    We report Independent Component Analysis (ICA) technique applied to THz spectroscopy and imaging to achieve a blind source separation. A reference water vapor absorption spectrum was extracted via ICA, then ICA was utilized on a THz spectroscopic image in order to clean the absorption of water molecules from each pixel. For this purpose, silica gel was chosen as the material of interest for its strong water absorption. The resulting image clearly showed that ICA effectively removed the water content in the detected signal allowing us to image the silica gel beads distinctively even though it was totally embedded in water before ICA was applied.

  16. Femtosecond fiber laser additive manufacturing of tungsten

    Science.gov (United States)

    Bai, Shuang; Liu, Jian; Yang, Pei; Zhai, Meiyu; Huang, Huan; Yang, Lih-Mei

    2016-04-01

    Additive manufacturing (AM) is promising to produce complex shaped components, including metals and alloys, to meet requirements from different industries such as aerospace, defense and biomedicines. Current laser AM uses CW lasers and very few publications have been reported for using pulsed lasers (esp. ultrafast lasers). In this paper, additive manufacturing of Tungsten materials is investigated by using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. Fully dense Tungsten part with refined grain and increased hardness was obtained and compared with parts made with different pulse widths and CW laser. The results are evidenced that the fs laser based AM provides more dimensions to modify mechanical properties with controlled heating, rapid melting and cooling rates compared with a CW or long pulsed laser. This can greatly benefit to the make of complicated structures and materials that could not be achieved before.

  17. Nanodot formation induced by femtosecond laser irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Abere, M. J.; Kang, M.; Goldman, R. S.; Yalisove, S. M. [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109 (United States); Chen, C. [Applied Physics Program, University of Michigan, Ann Arbor, Michigan 48109 (United States); Rittman, D. R. [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, Michigan 48109 (United States); Phillips, J. D. [Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, Michigan 48109 (United States); Torralva, B. [Department of Atmospheric, Oceanic, and Space Sciences, University of Michigan, Ann Arbor, Michigan 48109 (United States)

    2014-10-20

    The femtosecond laser generation of ZnSe nanoscale features on ZnSe surfaces was studied. Irradiation with multiple exposures produces 10–100 nm agglomerations of nanocrystalline ZnSe while retaining the original single crystal structure of the underlying material. The structure of these nanodots was verified using a combination of scanning transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. The nanodots continue to grow hours after irradiation through a combination of bulk and surface diffusion. We suggest that in nanodot formation the result of ultrafast laser induced point defect formation is more than an order of magnitude below the ZnSe ultrafast melt threshold fluence. This unique mechanism of point defect injection will be discussed.

  18. Femtosecond laser nanostructuring of silver film

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Ye; Ma, Guohong [Shanghai University, Department of Physics, Shanghai (China); Shanghai University, Laboratory for Microstructures, Shanghai (China); He, Min; Bian, Huadong; Yan, Xiaona [Shanghai University, Department of Physics, Shanghai (China); Lu, Bo [Shanghai University, Laboratory for Microstructures, Shanghai (China)

    2012-03-15

    In this paper, we report an evolution of surface morphology of silver film irradiated by a 1 kHz femtosecond laser. By SEM observations, it is noted that different nanostructures with respective surface features depend highly on the number of pulses and the laser fluence. Especially when the laser fluence is below the threshold fluence of film breakdown, a textured nanostructure including many nanobumps and nanocavities will appear on the surface of silver film. In order to determine an optimal regime for nanostructuring silver film and to further study the underlying mechanism, we perform a quantitative analysis of laser fluence and pulse number. The results show that this nanostructure formation should be due to a sequential process of laser melting, vapor bubbles bursting, heat stress confinement, and subsequent material redistribution. As a potential application, we find this nanostructured silver film can be used as the active substrate for surface enhanced Raman scattering effect. (orig.)

  19. Towards sub-femtosecond emission

    Science.gov (United States)

    Bach, Roger; Hansen, Peter; Batelaan, Herman; Hilbert, Shawn

    2010-03-01

    To manipulate femtosecond pulses of electrons new electron optical elements are needed. For example, if a source has a lower limit in the duration of the electron pulses that it generates, then aan electron optical element that can reduce the pulse duration could be useful. An example of this is the proposed ``temporal lens '' [1]. To detect the short electron pulses one also needs new elements. Attempts to use the ponderomotive interaction between the electron pulse and a second laser pulse will be presented [2]. Alternatively, we have started to explore a plasmonics structure provided by the Capasso group to make a fast electron switch. This has the potential to be useful both for switching, shaping and detecting the electron pulse. Finally, the experimental parameters and detection ideas for quantum degeneracy will be discussed. [1] S. Hilbert, B. Barwick, K. Uiterwaal, H. Batelaan, A. Zewail, ``Temporal lenses for attosecond and femtosecond electron pulses'', Proceedings of the National Academy of Sciences, p. 10558, vol. 106, (2009). [2] L. Kreminskaya, C. Corder, V. Engquist, O. Golovin, P. Hansen, H. Batelaan, A. I. Khizhnyak, G. A. Swartzlander, Jr., ``Laser Beam Shaping: Donut Mode Formation by Interference.'' Laser Beam Shaping X (Proceedings Volume) Proceedings of SPIE Volume: 7430.

  20. Terahertz radiation at 0.380 THz and 2.520 THz does not lead to DNA damage in skin cells in vitro.

    Science.gov (United States)

    Hintzsche, Henning; Jastrow, Christian; Heinen, Bernd; Baaske, Kai; Kleine-Ostmann, Thomas; Schwerdtfeger, Michael; Shakfa, Mohammed Khaled; Kärst, Uwe; Koch, Martin; Schrader, Thorsten; Stopper, Helga

    2013-01-01

    The question whether nonionizing electromagnetic radiation of low intensity can cause functional effects in biological systems has been a subject of debate for a long time. Whereas the majority of the studies have not demonstrated these effects, some aspects still remain unclear, e.g., whether high-frequency radiation in the terahertz range affects biological systems. In particular for frequencies higher than 0.150 THz, investigations of the ability of radiation to cause genomic damage have not been performed. In the present study, human skin cells were exposed in vitro to terahertz radiation at two specific frequencies: 0.380 and 2.520 THz. Power intensities ranged from 0.03-0.9 mW/cm(2) and the cells were exposed for 2 and 8 h. Our goal was to investigate whether the irradiation induced genomic damage in the cells. Chromosomal damage was not detected in the different cell types after exposure to radiation of both frequencies. In addition, cell proliferation was quantified and found to be unaffected by the exposure, and there was no increase in DNA damage measured in the comet assay for both frequencies. For all end points, cells treated with chemicals were included as positive controls. These positive control cells clearly showed decreased proliferation and increased genomic damage. The results of the present study are in agreement with findings from other studies investigating DNA damage as a consequence of exposure to the lower frequency range (radiation does not induce genomic damage.

  1. THz-radiation production using dispersively-selected flat electron bunches

    CERN Document Server

    Thangaraj, Jayakar

    2013-01-01

    We propose an alternative scheme for a tunable THz radiation source generated by relativistic electron bunches. This technique relies on the combination of dispersive selection and flat electron bunch. The dispersive selection uses a slit mask inside a bunch compressor to transform the energy-chirped electron beam into a bunch train. The flat beam transformation boosts the frequency range of the THz source by reducing the beam emittance in one plane. This technique generates narrow-band THz radiation with a tuning range between 0.2 - 4 THz. Single frequency THz spectrum can also be generated by properly choosing the slit spacing, slit width, and the energy chirp.

  2. Femtosecond laser-induced blazed periodic grooves on metals.

    Science.gov (United States)

    Hwang, Taek Yong; Guo, Chunlei

    2011-07-01

    In this Letter, we generate laser-induced periodic surface structures (LIPSSs) on platinum following femtosecond laser pulse irradiation. For the first time to our knowledge, we study the morphological profile of LIPSSs over a broad incident angular range, and find that the morphological profile of LIPSSs depends significantly on the incident angle of the laser beam. We show that LIPSS grooves become more asymmetric at a larger incident angle, and the morphological profile of LIPSSs formed at an incident angle over 55° eventually resembles that of a blazed grating. Our study suggests that the formation of the blazed groove structures is attributed to the selective ablation of grooves through the asymmetric periodic surface heating following femtosecond pulse irradiation. The blazed grooves are useful for controlling the diffraction efficiency of LIPSSs.

  3. Hybrid antiresonant metamaterial waveguides for THz and IR

    DEFF Research Database (Denmark)

    Stefani, Alessio; Lwin, Richard; Argyros, Alexander

    2016-01-01

    We report on a novel waveguide concept which combines antiresonant and metamaterial guidance. The guidance is achieved in the hollow core and loss as low as 2.3 dB/km are theoretically achievable in the THz frequency range. Both purely antiresonant and antiresonant metamaterial fibers have been f...

  4. Design and Fabrication of a 1 THz Backward Wave Amplifier

    DEFF Research Database (Denmark)

    Paoloni, Claudio; Di Carlo, Aldo; Brunetti, Francesca

    2011-01-01

    of the parts with dimensions supporting THz frequencies. A backward wave amplifier configuration is chosen to make the parts realizable. A carbon nanotube cold cathode has been considered for electron generation. A thermionic micro electron gun is designed to test the tube. A novel slow-wave structure (SWS...

  5. THz quantum-confined Stark effect in semiconductor quantum dots

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Monozon, Boris S.; Livshits, Daniil A.;

    2012-01-01

    We demonstrate an instantaneous all-optical manipulation of optical absorption at the ground state of InGaAs/GaAs quantum dots (QDs) via a quantum-confined Stark effect (QCSE) induced by the electric field of incident THz pulses with peak electric fields reaching 200 kV/cm in the free space...

  6. Exploring THz band for high speed wireless communications

    DEFF Research Database (Denmark)

    Yu, Xianbin; Zhang, Hangkai; Jia, Shi;

    2016-01-01

    We overview recent trend in developing high speed wireless communication systems by exploring large bandwidth available in the THz band, and we also present our recent experimental achievements on 400 GHz wireless transmission with a data rate of up to 60 Gbit/s by using a uni-travelling carrier...

  7. Fiber-Drawn Metamaterial for THz Waveguiding and Imaging

    DEFF Research Database (Denmark)

    Atakaramians, Shaghik; Stefani, Alessio; Li, Haisu

    2017-01-01

    In this paper, we review the work of our group in fabricating metamaterials for terahertz (THz) applications by fiber drawing. We discuss the fabrication technique and the structures that can be obtained before focusing on two particular applications of terahertz metamaterials, i.e., waveguiding ...... single-mode operating regime, and guiding due to magnetic and electric resonances. We also report recent and new experimental work on near- and far-field THz imaging using wire array metamaterials that are capable of resolving features as small as λ/28.......In this paper, we review the work of our group in fabricating metamaterials for terahertz (THz) applications by fiber drawing. We discuss the fabrication technique and the structures that can be obtained before focusing on two particular applications of terahertz metamaterials, i.e., waveguiding...... and sub-diffraction imaging. We show the experimental demonstration of THz radiation guidance through hollow core waveguides with metamaterial cladding, where substantial improvements were realized compared to conventional hollow core waveguides, such as reduction of size, greater flexibility, increased...

  8. Fiber Drawn 2D Polymeric Photonic Crystal THz Filters

    DEFF Research Database (Denmark)

    Stecher, Matthias; Jansen, Christian; Ahmadi-Boroujeni, Mehdi

    2012-01-01

    In this paper, we report on different polymeric 2D photonic crystal filters for THz frequencies which are fabricated by a standard fiber drawing technique. The bandstop filters were simulated and designed by the generalized multipole technique (GMT). The frequency and angle dependent transmission...

  9. Terahertz (THz) Radar: A Solution for Degraded Visibility Environments (DVE)

    Science.gov (United States)

    2016-11-01

    AS AN OFFICIAL DEPARTMENT OF THE ARMY POSITION UNLESS SO DESIGNATED BY OTHER AUTHORIZED DOCUMENTS. TRADE NAMES USE OF TRADE NAMES OR...to compensate for environmental conditions, allowing for actionable images in Degraded Visibility Environments (DVE). 14. SUBJECT TERMS Radar...Terahertz (THz) Waves, Degraded Visibility Environments (DVE) 15. NUMBER OF PAGES 22 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT

  10. Generation of surface electrons in femtosecond laser-solid interactions

    Institute of Scientific and Technical Information of China (English)

    XU; Miaohua; LI; Yutong; YUAN; Xiaohui; ZHENG; Zhiyuan; LIANG; Wenxi; YU; Quanzhi; ZHANG; Yi; WANG; Zhaohua; WEI; Zhiyi; ZHANG; Jie

    2006-01-01

    The characteristics of hot electrons produced by p-polarized femtosecond laser-solid interactions are studied. The experimental results show that the outgoing electrons are mainly emitted in three directions: along the target surface, the normal direction and the laser backward direction. The electrons flowing along the target surface are due to the confinement of the electrostatic field and the surface magnetic field, while the electrons in the normal direction due to the resonant absorption.

  11. Femtosecond electron-bunch dynamics in laser wakefields and vacuum

    OpenAIRE

    Khachatryan, A. G.; Irman, A.; Goor, van de, AAAM; Boller, K. -J.

    2007-01-01

    Recent advances in laser wakefield acceleration demonstrated the generation of extremely short (with a duration of a few femtoseconds) relativistic electron bunches with relatively low (of the order of couple of percent) energy spread. In this article we study the dynamics of such bunches in drift space (vacuum) and in channel-guided laser wakefields. Analytical solutions were found for the transverse coordinate of an electron and for the bunch envelope in the wakefield in the case of arbitra...

  12. Heating of a metal nanofilm during femtosecond laser pulse absorption

    Science.gov (United States)

    Bezhanov, S. G.; Kanavin, A. P.; Uryupin, S. A.

    2014-09-01

    We have studied the temperature evolution of electrons and the lattice of a metal nanofilm interacting with a femtosecond s- or p-polarised pulse. It is shown that even if the film thickness is greater than the skin-layer depth, the temperature distribution during the pulse action may be close to the uniform one because of the high electron thermal conductivity, which leads to a rapid redistribution of energy over the film thickness.

  13. Femtosecond scanning tunneling microscope

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, A.J.; Donati, G.P.; Rodriguez, G.; Gosnell, T.R.; Trugman, S.A.; Some, D.I.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). By combining scanning tunneling microscopy with ultrafast optical techniques we have developed a novel tool to probe phenomena on atomic time and length scales. We have built and characterized an ultrafast scanning tunneling microscope in terms of temporal resolution, sensitivity and dynamic range. Using a novel photoconductive low-temperature-grown GaAs tip, we have achieved a temporal resolution of 1.5 picoseconds and a spatial resolution of 10 nanometers. This scanning tunneling microscope has both cryogenic and ultra-high vacuum capabilities, enabling the study of a wide range of important scientific problems.

  14. Self-phase modulation of a single-cycle THz pulse

    Directory of Open Access Journals (Sweden)

    Hoffmann M. C.

    2013-03-01

    Full Text Available We demonstrate self-phase modulation (SPM of a single-cycle THz pulse in a semiconductor, using bulk n-GaAs as a model system. The SPM arises from the heating of free electrons in the electric field of the THz pulse. Electron heating leads to an ultrafast reduction of the plasma frequency, which results in a strong modification of the THz-range dielectric function of the material. THz SPM is observed directly in the time domain as a characteristic reshaping of single-cycle THz pulse. In the frequency domain, it corresponds to a strong frequency-dependent refractive index nonlinearity of n-GaAs, which is found to be both positive and negative within the broad spectrum of the THz pulse. The spectral position of zero nonlinearity is defined by the electron momentum relaxation rate. Nonlinear spectral broadening and compression of the single-cycle THz pulse was also observed.

  15. Probe beam-free detection of terahertz wave by electroluminescence induced by intense THz pulse

    Science.gov (United States)

    Shin, J.; Jin, Z.; Nosaka, Y.; Nakazawa, T.; Kodama, R.

    2016-03-01

    Recently, a table-top fs laser system can generate MW terahertz (THz) pulse with its electric field higher than 100 kV/cm can be generated by several schemes. Such a strong THz field can directly drive electrons inside various materials. Here, we demonstrated a direct THz electric field detection method by measuring the electroluminescence induced by intense THz pulse inside commonly available light emitting diode. An intense THz wave obtained by the two-color laser scheme was focused onto LED along with an external DC bias to induce luminescence which we found proportional to the amplitude of the incident THz field. The scheme can be useful to realize a low-cost, probe-free THz detection and imaging system.

  16. The time resolved measurement of ultrashort THz-band electric fields without an ultrashort probe

    CERN Document Server

    Walsh, David A; Jamison, Steven P

    2015-01-01

    The time-resolved detection of ultrashort pulsed THz-band electric field temporal profiles without an ultrashort laser probe is demonstrated. A non-linear interaction between a narrow-bandwidth optical probe and the THz pulse transposes the THz spectral intensity and phase information to the optical region, thereby generating an optical pulse whose temporal electric field envelope replicates the temporal profile of the real THz electric field. This optical envelope is characterised via an autocorrelation based FROG measurement, hence revealing the THz temporal profile. The combination of a narrow-bandwidth, long duration, optical probe and self-referenced FROG makes the technique inherently immune to timing jitter between the optical probe and THz pulse, and may find particular application where the THz field is not initially generated via ultrashort laser methods, such as the measurement of longitudinal electron bunch profiles in particle accelerators.

  17. High-power terahertz radiation from surface-emitted THz-wave parametric oscillator

    Institute of Scientific and Technical Information of China (English)

    Li Zhong-Yang; Yao Jian-Quan; Xu De-Gang; Zhong Kai; Wang Jing-Li; Bing Pi-Bin

    2011-01-01

    We report a pulsed surface-emitted THz-wave parametric oscillator based on two MgO:LiNbC>3 crystals pumped by a multi-longitudinal mode Q-switched Nd:YAG laser. Through varying the phase matching angle, the tunable THz wave output from 0.79 THz to 2.84 THz is realized. The maximum THz-wave output was 193.2 nJ/pulse at 1.84 THz as the pump power density was 212.5 MW/cm2, corresponding to the energy conversion efficiency of 2.42 ×10-6 and the photon conversion efficiency of about 0.037%. When the pump power density changed from 123 MW/cm2 to 148 MW/cm2 and 164 MW/cm2, the maximum output of the THz-wave moved to the high frequency band. We give a reasonable explanation for this phenomenon.

  18. [Application of THz technology to nondestructive detection of agricultural product quality].

    Science.gov (United States)

    Jiang, Yu-ying; Ge, Hong-yi; Lian, Fei-yu; Zhang, Yuan; Xia, Shan-hong

    2014-08-01

    With recent development of THz sources and detector, applications of THz radiation to nondestructive testing and quality control have expanded in many fields, such as agriculture, safety inspection and quality control, medicine, biochemistry, communication etc. Compared with other detection technique, being a new kind of technique, THz radiation has low energy, good perspectivity, and high signal-to-noise ratio, and thus can obtain physical, chemical and biological information. This paper first introduces the basic concept of THz radiation and the major properties, then gives an extensive review of recent research progress in detection of the quality of agricultural products via THz technique, analyzes the existing shortcomings of THz detection and discusses the outlook of potential application, finally proposes the new application of THz technique to detection of quality of stored grain.

  19. Study on the Design of Explosive (HNS)Content Analysis System Based on THz Spectrum Monomer%基于THz光谱的HNS单体猛炸药含量分析系统

    Institute of Scientific and Technical Information of China (English)

    李静; 鲁旭涛; 吕海峰; 孙运强

    2016-01-01

    HNS quantitative spectral analysis can not be achieved with the existing infrared Fourier transform spectrometer.As a common monomer explosive concerned,quick identification and quantitative analysis of the substance is important,so it is neces-sary to research and design a HNS detection system based on THz spectroscopy.Transmissive mode was used in the system to calculate the content of HNS.Electro-optic modulator module was introduced in the system,in order to achieve steady and rapid static scanning optical path.In the experiments HNS characteristic absorption peak positions were acquired.With this basis, combined air absorption characteristics of the wavelength band and spectrum data correlation expression was obtained,thus more characteristic wavelengths selected were determined.According to Beer-Lambert law,the function expression of HNS content and coefficient formula were presented.In the experiment different content of HNS sample powder was obtained with chemical configuration method with the content at the standard level.It made HNS sample powder into HNS Sample slice for all HNS samples,and it carried out HNS content testing with MINI-Z Terahertz spectroscopy and the system.Experimental results show that the results of the two methods are similar in the range of 0.10% to 50.00% for HNS content.Their error is less than 5.0%compared to the standard value,and the system has better linearity.%现有的傅里叶变换红外光谱仪无法实现六硝基芪的光谱定量分析,而作为常见单体猛炸药而言,能够快速识别并定量分析其含量具有重要意义,故研究设计了一种基于 THz 光谱技术的 HNS 检测系统。系统采用透射式吸收光谱计算模式。光路中引入电光调制模块,实现稳定快速的光程静态扫描。在实验获取HNS特征吸收峰位置的基础上,结合空气在此波段的吸收特性,获得了光谱数据相关系数表达式,并由此确定了多特征波长选择依据。结

  20. All-fiber femtosecond Cherenkov radiation source

    DEFF Research Database (Denmark)

    Liu, Xiaomin; Lægsgaard, Jesper; Møller, Uffe

    2012-01-01

    An all-fiber femtosecond source of spectrally isolated Cherenkov radiation is reported, to the best of our knowledge, for the first time. Using a monolithic, self-starting femtosecond Yb-doped fiber laser as the pump source and the combination of photonic crystal fibers as the wave-conversion med......An all-fiber femtosecond source of spectrally isolated Cherenkov radiation is reported, to the best of our knowledge, for the first time. Using a monolithic, self-starting femtosecond Yb-doped fiber laser as the pump source and the combination of photonic crystal fibers as the wave......-conversion medium, we demonstrate milliwatt-level, stable, and tunable Cherenkov radiation at visible wavelengths 580–630 nm, with pulse duration of sub-160-fs, and the 3 dB spectral bandwidth not exceeding 36 nm. Such an all-fiber Cherenkov radiation source is promising for practical applications in biophotonics...