WorldWideScience

Sample records for federal appliance efficiency

  1. Issues in federal preemption of state appliance energy efficiency regulations

    Energy Technology Data Exchange (ETDEWEB)

    Fang, J.M.; Balistocky, S.; Schaefler, A.M.

    1982-12-01

    The findings and conclusions of the analysis of the various issues involved in the federal preemption of state regulations for the DOE no standard rule on covered appliances are summarized. The covered products are: refrigerators, refrigerator-freezers, freezers, clothes dryers, kitchen ranges and ovens, water heaters (excluding heat pump water heaters), room air conditioners, central air conditioners (excluding heat pumps), and furnaces. A detailed discussion of the rationale for the positions of groups offering comment for the record is presneted. The pertinent categories of state and local regulations and programs are explained, then detailed analysis is conducted on the covered products and regulations. Issues relating to the timing of preemption of state regulations are discussed, as well as issues relating to burden of proof, contents of petitions for exemptions from preemption, criteria for evaluating petitions, and procedural and other issues. (LEW)

  2. 77 FR 15745 - Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC): Correction

    Science.gov (United States)

    2012-03-16

    ... (ASRAC) and Solicitation of Nominations for Membership; Correction. SUMMARY: The Department of Energy... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Appliance Standards and Rulemaking Federal...

  3. Energy efficient appliance choice under the EU labeling scheme

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Bradford F.; Schleich, Joachim [Fraunhofer-Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)

    2010-02-15

    This paper extends the existing empirical literature on consumers' choices when exposed to energy labeling schemes by allowing choices to depend on household socio-economic characteristics, technology-related factors, behavioral and motivational factors, and country conditions in a multi-country analysis. To account for a possible knowledge-based selection bias, the econometric model distinguishes label class knowledge from the energy class choice decision. As a general finding, most covariates show stronger relationships with knowledge of labeling class than with the choice of energy efficiency class. Four factors show particularly strong and expected influences on label class awareness. First, general awareness of household energy use and energy saving technologies spills over into awareness of the energy class of specific appliances. Second, socioeconomic characteristics mater, as education increases label class awareness and older age reduces awareness. Third, economic incentives matter, as stated economic importance of energy saving and higher country electricity prices both generate greater label awareness. By contrast, stated concerns about global warming do not appear to have a broad impact on awareness. Fourth, effective country implementation of the labeling scheme raises label awareness. More surprisingly, most factors that promote awareness of appliance energy classes have a limited influence on actual appliance energy class choice. Efficient energy behavior in the household is not strongly linked to appliance energy class choice. Socio-economic characteristics also have limited influence. This finding is inline with other studies that find that household socio-economic characteristics have relatively weak associations with the adoption of energy efficient technologies (Mills and Schleich 2010, Brohmann et al. 2009). In fact, with education it is vocational degrees rather than university degrees that are positively associated with the propensity to

  4. Scheduling home appliances for energy efficient buildings

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana; Kardaras, Georgios; Iversen, Villy Bæk

    2010-01-01

    the electrical devices are classified into low and high priority groups. The high priority devices are always granted power in order to operate normally. On the contrary, the low priority devices are granted or denied access to electrical power according to; their energy consumption and the available margin....... This can become beneficial for both energy companies and users. The electricity suppliers companies will be capable of regulating power generation during demand peaks. Moreover, users can be granted lower electricity bill rates for accepting delaying the operation of some of their appliances. To analyze...

  5. Scheduling home appliances for energy efficient buildings

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana; Kardaras, Georgios; Iversen, Villy Bæk

    2010-01-01

    the electrical devices are classified into low and high priority groups. The high priority devices are always granted power in order to operate normally. On the contrary, the low priority devices are granted or denied access to electrical power according to; their energy consumption and the available margin....... This can become beneficial for both energy companies and users. The electricity suppliers companies will be capable of regulating power generation during demand peaks. Moreover, users can be granted lower electricity bill rates for accepting delaying the operation of some of their appliances. To analyze...

  6. Appliance Efficiency Standards and Price Discrimination

    Energy Technology Data Exchange (ETDEWEB)

    Spurlock, Cecily Anna [Univ. of California, Berkeley, CA (United States)

    2013-05-08

    I explore the effects of two simultaneous changes in minimum energy efficiency and ENERGY STAR standards for clothes washers. Adapting the Mussa and Rosen (1978) and Ronnen (1991) second-degree price discrimination model, I demonstrate that clothes washer prices and menus adjusted to the new standards in patterns consistent with a market in which firms had been price discriminating. In particular, I show evidence of discontinuous price drops at the time the standards were imposed, driven largely by mid-low efficiency segments of the market. The price discrimination model predicts this result. On the other hand, in a perfectly competition market, prices should increase for these market segments. Additionally, new models proliferated in the highest efficiency market segment following the standard changes. Finally, I show that firms appeared to use different adaptation strategies at the two instances of the standards changing.

  7. Energy Efficiency of Electrical Appliances - Effects of Instruments and Measures; Energieeffizienz bei Elektrogeraeten

    Energy Technology Data Exchange (ETDEWEB)

    Brunner, C.U.; Bush, E.; Gasser, S.; Lingenhel, S.; Nipkow, J.

    2001-07-01

    This comprehensive report for the Swiss Federal Office of Energy presents the results of an analysis made of the market for electrical appliances in Switzerland with the aim of understanding the instruments and measures needed to improve energy efficiency better. The paper reports on reviews made of previous studies that were made in Switzerland and Germany and on interviews made with important persons and institutions in this field. Eight basic findings are listed concerning market expansion, technical progress, user behaviour, efficiency, possibilities for intervention, market forces, efficient appliances as a niche market and the competence lacking in the energy-efficiency area. Twelve basic points to be considered in the implementation of an energy-efficiency strategy are discussed and a list of requirements to be fulfilled by politics is presented. The results of the analysis for various sectors and the recommendations made for an implementation organisation are presented in detail. The report is concluded with a extract from the data base on the energy consumption of electrical appliances.

  8. Research and development of efficient, environmentally improved household gas appliances

    Directory of Open Access Journals (Sweden)

    Adžić Miroljub

    2006-01-01

    Full Text Available An experimental research and analysis of performance of three domestic house hold gas appliances was carried out. The objective of this work, based on the conducted analysis of the research data, was to improve the appliances’ performance, prefer ably through relative simple modifications, in order to satisfy DIN 4702 emissions and efficiency standards when using different fuels, including natural gas, liquefied petroleum gases and lower quality natural gas. This report summarizes details of this work and how the objectives were achieved. .

  9. New challenge for residential building energy efficiency standards in Japan: unify energy efficiency of envelope and housing appliances

    Energy Technology Data Exchange (ETDEWEB)

    Murakoshi, Chiharu; Nakagami, Hidetoshi; Nakamura, Mikiko [Jyukankyo Research Inst. (Japan)

    2007-07-01

    Residential energy efficiency standards of many countries evaluate envelope performance. Japanese energy efficiency standards of residential building were revised in 1999, and include both a performance standard and a prescriptive standard for envelope energy efficiency. The target is for over 50 % of new houses to meet the standard in 2010. Efficiency of residential appliances are governed by the Top Runner standards. However, these standards consider each appliance individually, but do not evaluate the whole house comprehensively.Because residential energy efficiency varies greatly depending on the performance of appliances, we developed a method to evaluate performance of both the envelope and the appliances, with the following characteristics. 1) Evaluate the energy efficiency of the envelope and appliance together. 2) Evaluate the energy efficiency of the whole house using total energy consumption specified for the space conditioning, water heating, lighting, and ventilation appliances at the time of construction. 3) Evaluate the efficiency for space conditioning and water heating appliances using efficiencies during actual operating time. 4) We have performed detailed measurements to understand the efficiency during actual operation. The evaluation method we developed will have a major impact on future Japanese standards for residential energy efficiency. In this paper, we discuss the composition of new standards for housing energy efficiency and explain our method for evaluating energy efficiency of household appliances.

  10. The International Database of Efficient Appliances (IDEA): A New Resource for Global Efficiency Policy

    Energy Technology Data Exchange (ETDEWEB)

    Gerke, Brian F; McNeil, Michael A; Tu, Thomas; Xu, Feiyang

    2017-09-06

    A major barrier to effective appliance efficiency program design and evaluation is a lack of data for determination of market baselines and cost-effective energy savings potential. The data gap is particularly acute in developing countries, which may have the greatest savings potential per unit GDP. To address this need, we are developing the International Database of Efficient Appliances (IDEA), which automatically compiles data from a wide variety of online sources to create a unified repository of information on efficiency, price, and features for a wide range of energy-consuming products across global markets. This paper summarizes the database framework and demonstrates the power of IDEA as a resource for appliance efficiency research and policy development. Using IDEA data for refrigerators in China and India, we develop robust cost-effectiveness indicators that allow rapid determination of savings potential within each market, as well as comparison of that potential across markets and appliance types. We discuss implications for future energy efficiency policy development.

  11. 78 FR 51100 - Appliance Standards and Rulemaking Federal Advisory Committee: Notice of Open Teleconference/Webinar

    Science.gov (United States)

    2013-08-20

    .../Webinar AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of open Teleconference/Webinar. SUMMARY: This notice announces a meeting of the Appliance Standards and..., 2013 at 1:00 p.m.-5:00 p.m. (EDT). ADDRESSES: Webinar Only, you may register at...

  12. Introducing the Ordinance on energy efficiency labelling of household appliances on Croatian market

    Energy Technology Data Exchange (ETDEWEB)

    Kolega, Vesna [Energy institute Hrvoje Pozar, Zagreb (Croatia)

    2007-07-01

    The legal basis for the transposition of EU appliances labelling legislation in Croatia is the Energy law which Article 13 says: 'All electricity appliances have to be labelled by energy efficiency labels. The contents and design of energy efficiency labels have to be regulated by sub-law document called the Ordinance on Energy Efficiency Labelling of Households Appliances'. On 17th November 2005 the Ordinance on Energy Efficiency Labelling of Household Appliances entered into force. It is based on the Framework Directive 92/75/EEC and implementing Directives 94/2/EC, 95/12/EC, etc for the following appliances: refrigerators and freezers; washing machines; tumble driers; washing/drying machines; dishwashers; electrical ovens; electrical lamps; air-conditioners. Before 1st May 2006, in the majority of larger retail stores in Croatia, the energy efficiency labels were present on strictly voluntary basis. Such labels could be found mainly on refrigerators and freezers, washing machines, dryers and dishwashers. Recently, air-conditioners were also very often equipped with labels. These labels were correctly translated in Croatian, although text does not completely match the label defined in the Ordinance on Energy Efficiency Labelling of Household Appliances. Although such labels are not recognized as the appropriate labelling according the Ordinance, they do provide some practical basis for the implementation itself. Since 1st May 2006, although the Ordinance has been fully adopted, there are no valid Croatian labels attached on all displayed appliances in a number of HA stores. Aiming at household appliances market transformation in Croatia, it is very important at the moment to find the best ways for the Ordinance verification and enforcement.

  13. Avoided electricity subsidy payments can finance substantial appliance efficiency incentive programs: Case study of Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Leventis, Greg [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Gopal, Anand [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Rue du Can, Stephane de la [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Phadke, Amol [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-03-01

    Numerous countries use taxpayer funds to subsidize residential electricity for a variety of socioeconomic objectives. These subsidies lower the value of energy efficiency to the consumer while raising it for the government. Further, while it would be especially helpful to have stringent Minimum Energy Performance Standards (MEPS) for appliances and buildings in this environment, they are hard to strengthen without imposing a cost on ratepayers. In this secondbest world, where the presence of subsidies limits the government’s ability to strengthen standards, we find that avoided subsidies are a readily available source of financing for energy efficiency incentive programs. Here, we introduce the LBNL Energy Efficiency Revenue Analysis (LEERA) model to estimate the appliance efficiency improvements that can be achieved in Mexico by the revenue neutral financing of incentive programs from avoided subsidy payments. LEERA uses the detailed techno-economic analysis developed by LBNL for the Super-efficient Equipment and Appliance Deployment (SEAD) Initiative to calculate the incremental costs of appliance efficiency improvements. We analyze Mexico’s tariff structures and the long-run marginal cost of supply to calculate the marginal savings for the government from appliance efficiency. We find that avoided subsidy payments alone can finance incentive programs that cover the full incremental cost of refrigerators that are 27% more efficient and TVs that are 32% more efficient than baseline models. We find less substantial market transformation potential for room ACs primarily because AC energy savings occur at less subsidized tariffs.

  14. Assessment of the impact of energy-efficient household appliances on the electricity consumption in the residential sector of Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Morishita, Claudia; Ghisi, Enedir

    2010-09-15

    In many countries the residential sector accounts for about 20.0% of the electricity consumption, which increases the concern about energy savings. The main objective of this paper is to assess the impact of energy-efficient household appliances on the electricity consumption of the Brazilian residential sector by using electricity end-use data. The consumption of each appliance is obtained based on official data from existing studies, being estimated for a dwelling and for the whole residential sector. Results indicate that the potential for energy savings by replacing existing appliances with energy-efficient household appliances would be 29.5% in the residential sector of Brazil.

  15. Greens, suits, and bureaucrats: A sociological study of dynamic organizational relationships in energy efficient appliance policy

    Science.gov (United States)

    Shwom-Evelich, Rachael Leah

    In this dissertation I develop an approach to understanding dynamic organizational relations and the processes of environmental degradation and reform. To do this, I draw on environmental and organizational sociology to inform an empirical study of interorganizational relationships in defining and promoting energy efficient appliances in the United States (US). The dissertation follows a three paper approach which involves (a) an overall introduction to the substantive issue of appliance energy efficiency in the US; (b) producing three separate and stand alone articles of publishable quality to be submitted to professional journals; and (c) an overall conclusion. The three articles are as follows: (1) a synthetic literature review identifying five lessons that organizational sociology and environmental sociology can learn from each other to advance our sociological understanding of organizations, energy issues, and climate change (2) a qualitative case study of the changing relationships between business, government and environmental and energy advocacy organizations around mandatory appliance efficiency standards supporting the development of a context-dependent theory of ecological modernization and treadmill of production theories in environmental sociology and (3) a network analysis of public government, business and energy efficiency advocate's interorganizational relationships and its influence on subsequent organizational behaviors in the appliance energy efficiency field. The second and third articles are based on extensive archival research on organizational negotiations of public record over defining energy efficient appliances in both regulatory and voluntary settings. Finally I will provide an overall conclusion that brings together the most significant findings of each individual article in anticipation of a synthetic approach to the study of organizations in environmental reform.

  16. Appliance Diffusion Model for Energy Efficiency Standards and Labeling Evaluation in the Capital of Lao Pdr

    Directory of Open Access Journals (Sweden)

    Hajime Sasaki

    2015-09-01

    Full Text Available Because of the rapid growth of energy demand in developing countries, policies for energy efficiency are receiving increasing attention. Although energy efficiency standards and labeling (EES&L is a standard policy tool in many countries, some developing countries, such as Lao PDR, have not yet implemented them fully. In order to understand the potential impact of EES&L, this paper aims at collecting data that contribute to EES&L and at analysing appliance possessions in Vientiane City, Lao PDR. We conducted an interview survey on 600 households in Vientiane City and performed logistic regression analysis that set possession of appliances as the dependent variable. As a result of the analysis, we identified that the income level and the electricity consumption are the principal independent variables and the relationship of these variables with possession rates depends on appliances. Our model helps identify appliances that are expected to be in high demand associated with either economic growth or human population increase in Vientiane City.

  17. 1992-1993 Bonneville Appliance Efficiency Program: Showerhead Evaluation Volume II - Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Warwick, W.M.

    1995-01-01

    This report included the appendices for 1992-1993 Bonneville appliance efficiency program: showerhead evaluation. It consists of nine appendices, titled: Bonneville documents; overview of research projects; Puget Power and Light persistence study; hot-water flow analyses and assumptions documentation; regional end-use metering program; showerhead and faucet aerator performance assessment; Bonneville showerhead program distribution methods by participating utility; water- and energy-saving measure distribution methods literature review; REMP study load shape results.

  18. Cost-benefit analysis: introducing energy efficient and renewable energy appliances in Lebanese households

    Energy Technology Data Exchange (ETDEWEB)

    Ruble, Isabella [American University of Beirut, Department of Economics (Lebanon)], E-mail: economics.ir@gmail.com

    2011-07-01

    In Lebanon, neglect of the electricity sector has led to a serious shortage in installed capacity. Recently, the government of Lebanon declared its intention to raise the share of renewable energy (RE) year by year in order to reduce energy consumption. This paper gave a cost-benefit analysis and reviewed the replacement of five major traditional household appliances with their energy efficient (EE) or renewable energy counterparts. This initiative would mostly be felt in three main areas: electricity consumption, consumer costs, and government expenditure. There is a strong possibility that the electricity demand of the 1.2 million Lebanese households can be reduced by introduction of these EE household appliances. Benefits would also accrue to the government in the form of avoided subsidies and reduced need for installed capacity. This paper finds that the benefits to be expected from these policy recommendations largely outweigh the costs.

  19. Measuring efficiency among US federal hospitals.

    Science.gov (United States)

    Harrison, Jeffrey P; Meyer, Sean

    2014-01-01

    This study evaluates the efficiency of federal hospitals, specifically those hospitals administered by the US Department of Veterans Affairs and the US Department of Defense. Hospital executives, health care policymakers, taxpayers, and federal hospital beneficiaries benefit from studies that improve hospital efficiency. This study uses data envelopment analysis to evaluate a panel of 165 federal hospitals in 2007 and 157 of the same hospitals again in 2011. Results indicate that overall efficiency in federal hospitals improved from 81% in 2007 to 86% in 2011. The number of federal hospitals operating on the efficiency frontier decreased slightly from 25 in 2007 to 21 in 2011. The higher efficiency score clearly documents that federal hospitals are becoming more efficient in the management of resources. From a policy perspective, this study highlights the economic importance of encouraging increased efficiency throughout the health care industry. This research examines benchmarking strategies to improve the efficiency of hospital services to federal beneficiaries. Through the use of strategies such as integrated information systems, consolidation of services, transaction-cost economics, and focusing on preventative health care, these organizations have been able to provide quality service while maintaining fiscal responsibility. In addition, the research documented the characteristics of those federal hospitals that were found to be on the Efficiency Frontier. These hospitals serve as benchmarks for less efficient federal hospitals as they develop strategies for improvement.

  20. Bottom-Up Energy Analysis System (BUENAS). An international appliance efficiency policy tool

    Energy Technology Data Exchange (ETDEWEB)

    McNeil, M.A.; Letschert, V.E.; De la Rue du Can, S.; Ke, Jing [Lawrence Berkeley National Laboratory LBNL, 1 Cyclotron Rd, Berkeley, CA (United States)

    2013-02-15

    The Bottom-Up Energy Analysis System (BUENAS) calculates potential energy and greenhouse gas emission impacts of efficiency policies for lighting, heating, ventilation, and air conditioning, appliances, and industrial equipment through 2030. The model includes 16 end use categories and covers 11 individual countries plus the European Union. BUENAS is a bottom-up stock accounting model that predicts energy consumption for each type of equipment in each country according to engineering-based estimates of annual unit energy consumption, scaled by projections of equipment stock. Energy demand in each scenario is determined by equipment stock, usage, intensity, and efficiency. When available, BUENAS uses sales forecasts taken from country studies to project equipment stock. Otherwise, BUENAS uses an econometric model of household appliance uptake developed by the authors. Once the business as usual scenario is established, a high-efficiency policy scenario is constructed that includes an improvement in the efficiency of equipment installed in 2015 or later. Policy case efficiency targets represent current 'best practice' and include standards already established in a major economy or well-defined levels known to enjoy a significant market share in a major economy. BUENAS calculates energy savings according to the difference in energy demand in the two scenarios. Greenhouse gas emission mitigation is then calculated using a forecast of electricity carbon factor. We find that mitigation of 1075 mt annual CO2 emissions is possible by 2030 from adopting current best practices of appliance efficiency policies. This represents a 17 % reduction in emissions in the business as usual case in that year.

  1. Max Tech and Beyond: Maximizing Appliance and Equipment Efficiency by Design

    Energy Technology Data Exchange (ETDEWEB)

    Desroches, Louis-Benoit; Garbesi, Karina

    2011-07-20

    It is well established that energy efficiency is most often the lowest cost approach to reducing national energy use and minimizing carbon emissions. National investments in energy efficiency to date have been highly cost-effective. The cumulative impacts (out to 2050) of residential energy efficiency standards are expected to have a benefit-to-cost ratio of 2.71:1. This project examined energy end-uses in the residential, commercial, and in some cases the industrial sectors. The scope is limited to appliances and equipment, and does not include building materials, building envelopes, and system designs. This scope is consistent with the scope of DOE's appliance standards program, although many products considered here are not currently subject to energy efficiency standards. How much energy could the United States save if the most efficient design options currently feasible were adopted universally? What design features could produce those savings? How would the savings from various technologies compare? With an eye toward identifying promising candidates and strategies for potential energy efficiency standards, the Max Tech and Beyond project aims to answer these questions. The analysis attempts to consolidate, in one document, the energy savings potential and design characteristics of best-on-market products, best-engineered products (i.e., hypothetical products produced using best-on-market components and technologies), and emerging technologies in research & development. As defined here, emerging technologies are fundamentally new and are as yet unproven in the market, although laboratory studies and/or emerging niche applications offer persuasive evidence of major energy-savings potential. The term 'max tech' is used to describe both best-engineered and emerging technologies (whichever appears to offer larger savings). Few best-on-market products currently qualify as max tech, since few apply all available best practices and components. The

  2. Do customized orthodontic appliances and vibration devices provide more efficient treatment than conventional methods?

    Science.gov (United States)

    Aldrees, Abdullah M

    2016-05-01

    The incorporation of technological advances in the field of clinical orthodontics to increase treatment efficiency has led to the development of customized appliances (Insignia®), archwires (Suresmile®), and the production of devices to enhance tooth movement (Acceledent®). This review presents a comprehensive study of the literature concerning these products, and analyzes the available evidence of their efficiency. To date, one pilot study has evaluated the efficiency of the Insignia® system, three retrospective studies have assessed the efficiency of the Suresmile® system, and a few Acceledent® reports have described its effect on treatment time. Critical appraisal of the reviewed papers revealed that the efficiency of the Insignia® system cannot be confirmed based on the available evidence, while the use of Suresmile® can reduce overall treatment time in simple cases. The acceleration of tooth movement by Acceledent® devices has not yet been confirmed.

  3. Refrigerator Efficiency in Ghana: Tailoring an appliance markettransformation program design for Africa

    Energy Technology Data Exchange (ETDEWEB)

    Ben Hagan, Essel; Van Buskirk, Robert; Ofosu-Ahenkorah, Alfred; McNeil, Michael A.

    2006-02-28

    A simple replication of developed country applianceefficiency labels and standards is unlikely to be feasible in Ghana andmany other countries in Africa. Yet by creatively modifying the developedcountry appliance efficiency market transformation model, it should bepossible to achieve dramatic energy use reductions. As was true indeveloped countries in the previous two decades, refrigeration efficiencyimprovements provide the greatest energy savings potential in theresidential electricity sector in Ghana. Although Ghana, like manyAfrican countries may impose standards on imports since Ghana does nothave manufacturing facilities for appliances in country. This approachmay hurt some consumers who patronize a very diverse market of usedappliances imported from Europe. We discuss how meeting the challenges ofthe Ghanaian market will require modification of the usual energyefficiency labeling and standards paradigm. But once a refrigeratormarket transformation is accomplished in Ghana, we estimate an averageenergy savings potential of 550 kWh/refrigerator/year, and a monetarysavings of more than $35/refrigerator/year. We discuss how this modifiedrefrigerator efficiency market transformation may occur in the Ghanaiancontext. If successful, this market transformation is likely to be anexample for many other African countries.

  4. Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, James E.; Wiel, Stephen

    2001-02-16

    Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and the United Nations Foundation (UNF) recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This guidebook was prepared over the course of the past year with significant contribution from the authors and reviewers mentioned previously. Their diligent participation has made this the international guidance tool it was intended to be. The lead authors would also like to thank the following individuals for their support in the development, production, and distribution of the guidebook: Marcy Beck, Elisa Derby, Diana Dhunke, Ted Gartner, and Julie Osborn of Lawrence Berkeley National Laboratory as well as Anthony Ma of Bevilacqua-Knight, Inc. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards-setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the

  5. The enactment of thermal efficiency standard for domestic gas appliances and its foreground of Implementing in Chongqing

    Institute of Scientific and Technical Information of China (English)

    PENGShini; PENGLuo; FUXiuping

    2003-01-01

    This paper analyses the principles we should obey and the problems we should be confronted with when thermal efficiency standards for instantaneous gas water heaters and gas ranges are enacted. It is considered that enactment of thermal efficiency standards for domestic gas appliances could intensify economization on domestic gas utilization and marked economic and environmental benefits could be generated consequently.

  6. Enforcement/certification program for appliance efficiency standards. Task II, report

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-28

    The research and analysis program at Vitro Labs. in support of the appliance certification and enforcement program provides Vitro's recommended approach to appliance certification and enforcement (C/E). The approach established the C/E program framework, general criteria, and procedures for assuring a specified level of energy-efficiency performance for 13 categories of consumer products (furnaces, humidifiers, dehumidifiers, dishwashers, television, clothes washers, freezers, air conditioners, stoves, refrigerators, water heaters). Section 2 summarizes the recommended approach. Section 3 contains detailed evaluations and comparisons for four independent alternative approaches considered (minimal government intevention, strong certification control, strong enforcement audit, and mixed certification/enforcement). The fifth C/E approach (strong remedy/deterrent) involves the remedies available to the government should non-compliance be discovered and could affect the choice among the approaches, but this approach has not been evaluated. Section 4 summarizes the analysis methodology used to select the recommended approach. Additional information is provided in 6 appendices.

  7. Evaluation of a prevention programme efficiency for patients with fixed orthodontic appliances

    Directory of Open Access Journals (Sweden)

    Matić Sava

    2011-01-01

    Full Text Available Background/Aim. Orthodontic treatment enables the establishment of functional occlusion and improvement of oral health, however, it increases the risk of periodontal disease development. The aim of this paper was to examine the efficiency of the applied programme for the prevention of gingivitis in children undergoing the fixed orthodontic appliance therapy and to determine the most efficient devices and techniques for maintaining oral hygiene during orthodontic treatment. Methods. The study included 80 patients of both genders - 60 patients comprised the experimental group and 20 patients comprised the control group. All of them were patients of the Clinic for Orthodontics at the School of Dentistry in Belgrade, aged between 13 and 18. The Silness-Löe Plaque Index (PI was utilised for the assessment of oral hygiene quality and Silness-Löe Gingival Index (GI and Mühlemann Papilla Bleeding Index (PBI were utilised for the assessment of gingival state. Checkups were conducted as a single-blind study at the beginning and after the first, the third and the sixth month of the preventive and prophylactic programme. Results. During the observed period, a statistically significant change in PI, GI and PBI values was noticed (p < 0.005, as well as the difference in the dynamics of value changes during the periods between the observed groups. Conclusion. The preventive programme, applied to children undergoing the fixed orthodontic appliance therapy, had a positive effect both on oral hygiene quality and gingival state. The values of the examined parameters of the patients from the experimental group were significantly lower in comparison with those of the patients from the control group. The most efficient combination of devices for oral hygiene during orthodontic treatment was: a Curaprox CP5460 toothbrush, CD Ortho 60 orthodontic toothbrush and Curaprox CPS 14 interdental brush.

  8. A retrospective investigation of energy efficiency standards: policies may have accelerated long term declines in appliance costs

    Science.gov (United States)

    Van Buskirk, R. D.; Kantner, C. L. S.; Gerke, B. F.; Chu, S.

    2014-11-01

    We perform a retrospective investigation of multi-decade trends in price and life-cycle cost (LCC) for home appliances in periods with and without energy efficiency (EE) standards and labeling polices. In contrast to the classical picture of the impact of efficiency standards, the introduction and updating of appliance standards is not associated with a long-term increase in purchase price; rather, quality-adjusted prices undergo a continued or accelerated long-term decline. In addition, long term trends in appliance LCCs—which include operating costs—consistently show an accelerated long term decline with EE policies. We also show that the incremental price of efficiency improvements has declined faster than the baseline product price for selected products. These observations are inconsistent with a view of EE standards that supposes a perfectly competitive market with static supply costs. These results suggest that EE policies may be associated with other forces at play, such as innovation and learning-by-doing in appliance production and design, that can affect long term trends in quality-adjusted prices and LCCs.

  9. A Global Review of Incentive Programs to Accelerate Energy-Efficient Appliances and Equipment

    Energy Technology Data Exchange (ETDEWEB)

    de la Rue du Can, Stephane; Phadke, Amol; Leventis, Greg; Gopal, Anand

    2013-08-01

    Incentive programs are an essential policy tool to move the market toward energy-efficient products. They offer a favorable complement to mandatory standards and labeling policies by accelerating the market penetration of energy-efficient products above equipment standard requirements and by preparing the market for increased future mandatory requirements. They sway purchase decisions and in some cases production decisions and retail stocking decisions toward energy-efficient products. Incentive programs are structured according to their regulatory environment, the way they are financed, by how the incentive is targeted, and by who administers them. This report categorizes the main elements of incentive programs, using case studies from the Major Economies Forum to illustrate their characteristics. To inform future policy and program design, it seeks to recognize design advantages and disadvantages through a qualitative overview of the variety of programs in use around the globe. Examples range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-Points that reward customers for buying efficient appliances under a government recovery program (Japan). We found that evaluations have demonstrated that financial incentives programs have greater impact when they target highly efficient technologies that have a small market share. We also found that the benefits and drawbacks of different program design aspects depend on the market barriers addressed, the target equipment, and the local market context and that no program design surpasses the others. The key to successful program design and implementation is a thorough understanding of the market and effective identification of the most important local factors hindering the penetration of energy-efficient technologies.

  10. Enforcement/certification program for appliance efficiency standards. Task I report

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-12

    The structure and features of selected certification programs were evaluated, their operational characteristics determined, and primary program problems and successes identified. An initial review of 50 certification programs in the Federal, state, and private sectors was performed, followed by a detailed review of 8 of the programs (EPA New Product noise; EPA Automobile Emissions, AHAM Room Air Conditioners; ARI Unitary Air Conditioners/Heat Pump; NHTSA Automobile Tire Safety; California Applicance Standards; Underwriters Laboratories Product Safety; and Ford's Quality-Assurance Program for Suppliers). Flow charts are presented to illustrate each program's structure and major characteristics. Matrices are developed to list the operating and control features of each program. Analyses of the 8 selected programs were performed to the degree necessary to develop and propose 5 potential approaches to an appliance certification/enforcement program (minimal intervention, strong certification control, strong enforcement audit, balanced certification and enforcement and strong enforcement remedies and deterrents). The approaches are documented in Section 3. The evaluation framework is described in Section 4, while a review of final test procedures and related public testimony are given in Section 5. (MCW)

  11. Consumer’s Attitude Towards Investments in Residential Energy-Efficient Appliances: How End-User Choices Contribute to Change Future Energy Systems

    DEFF Research Database (Denmark)

    Baldini, Mattia; Trivella, Alessio; Wente, Jordan William Halverson

    2017-01-01

    conventional and environmentally friendly alternatives when purchasing new household electric appliances. This study employs empirical data from a survey conducted by the Danish Energy Agency to model the decision criteria behind Danish consumer investment in energy-efficient labeled appliances. The analysis...

  12. 78 FR 41867 - Appliance Standards and Rulemaking Federal Advisory Committee: Notice of Open Teleconference/Webinar

    Science.gov (United States)

    2013-07-12

    ... Tuesday, March 12, 2013. 78 FR 15653. The selections are designed to ensure a broad and balanced array of.../Webinar AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice...

  13. 78 FR 37995 - Appliance Standards and Rulemaking Federal Advisory Committee: Notice of Open Teleconference/Webinar

    Science.gov (United States)

    2013-06-25

    ... Open Teleconference/Webinar AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of open Teleconference/Webinar. SUMMARY: This document announces a meeting of the...: Teleconference/Webinar Only, you may register at https://www1.gotomeeting.com/register/265936657 ....

  14. Powering a Home with Just 25 Watts of Solar PV. Super-Efficient Appliances Can Enable Expanded Off-Grid Energy Service Using Small Solar Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Phadke, Amol A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jacobson, Arne [Schatz Energy Research Center, Arcata, CA (United States); Park, Won Young [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lee, Ga Rick [Schatz Energy Research Center, Arcata, CA (United States); Alstone, Peter [Univ. of California, Berkeley, CA (United States); Khare, Amit [Schatz Energy Research Center, Arcata, CA (United States)

    2015-04-01

    Highly efficient direct current (DC) appliances have the potential to dramatically increase the affordability of off-grid solar power systems used for rural electrification in developing countries by reducing the size of the systems required. For example, the combined power requirement of a highly efficient color TV, four DC light emitting diode (LED) lamps, a mobile phone charger, and a radio is approximately 18 watts and can be supported by a small solar power system (at 27 watts peak, Wp). Price declines and efficiency advances in LED technology are already enabling rapidly increased use of small off-grid lighting systems in Africa and Asia. Similar progress is also possible for larger household-scale solar home systems that power appliances such as lights, TVs, fans, radios, and mobile phones. When super-efficient appliances are used, the total cost of solar home systems and their associated appliances can be reduced by as much as 50%. The results vary according to the appliances used with the system. These findings have critical relevance for efforts to provide modern energy services to the 1.2 billion people worldwide without access to the electrical grid and one billion more with unreliable access. However, policy and market support are needed to realize rapid adoption of super-efficient appliances.

  15. Labeling programs and efficiency standards to control the energy consumption of household appliances: current situation, main results and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Menanteau, Ph.

    2000-09-01

    To control the rise in electricity consumption for specific uses, the industrialized countries started by introducing special programs aimed at improving energy efficiency. Among the different instruments available, labeling programs and minimum energy performance standards (MEPS) have proved to be very effective. The first part of this document presents the current situation, the main results and recommendations concerning the labeling programs and efficiency standards to control the energy consumption of household appliances. This analyze is done for each country in details providing the name of the program or measure, the date of implementation, the objective and the main characteristics of the program, the impacts and evaluation. (A.L.B.)

  16. Saturation, energy consumption, CO{sub 2} emission and energy efficiency from urban and rural households appliances in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Rosas-Flores, Jorge Alberto; Rosas-Flores, Dionicio [Division de Estudios de Posgrado, Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria Coyoacan 04510, Mexico, DF (Mexico); Posgrado de Arquitectura, Facultad de Arquitectura, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria Coyoacan 04510, Mexico, DF (Mexico); Galvez, David Morillon [Posgrado de Arquitectura, Facultad de Arquitectura, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria Coyoacan 04510, Mexico, DF (Mexico); Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico, Ciudad, Universitaria, Coyoacan 04510, Mexico, DF (Mexico)

    2011-01-15

    Energy usage and energy efficiency are of increasing concern in Mexico, electricity generation principally depends upon fossil fuels. On one hand, the stocks of these fuels have been confirmed to be critically limited. On the other hand, in process of electricity generation by means of these fuels, a number of poisonous by-products adversely affect the conservation of natural eco-system. This paper focuses on estimation of energy consumption, energy savings, reduction of emissions of CO{sub 2} for use of urban and rural household appliances in Mexico between 1996 and 2021. The analysis concentrates on six major energy end uses in the residential sector: refrigerators, air conditioners, washing machines, TV set, iron and heater. It is estimated that by 2021 there will be a cumulative saving of 22,605 GWh, as a result of the implementation of government programs on energy efficiency that represents a cumulative reduction of CO{sub 2} emissions of 15,087 Tg CO{sub 2}. It means that Mexico can reduce in 5650 MW the generation capacity of national electricity system, which is to avoid burning 40.35 MM barrels of oil. The findings can be useful to policy makers as well as household appliances users. (author)

  17. Energy-Efficiency Labels and Standards: A Guidebook forAppliances, Equipment, and Lighting - 2nd Edition

    Energy Technology Data Exchange (ETDEWEB)

    Wiel, Stephen; McMahon, James E.

    2005-04-28

    Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and several other organizations identified on the cover of this guidebook recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This second edition of the guidebook was prepared over the course of the past year, four years after the preparation of the first edition, with a significant contribution from the authors and reviewers mentioned previously. Their diligent participation helps maintain this book as the international guidance tool it has become. The lead authors would like to thank the members of the Communications Office of the Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory for their support in the development, production, and distribution of the guidebook. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design

  18. From Policy to Compliance: Federal Energy Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    DeMates, Laurèn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Scodel, Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-09-06

    Federal buyers are required to purchase energy-efficient products in an effort to minimize energy use in the federal sector, save the federal government money, and spur market development of efficient products. The Federal Energy Management Program (FEMP)’s Energy Efficient Product Procurement (EEPP) Program helps federal agencies comply with the requirement to purchase energy-efficient products by providing technical assistance and guidance and setting efficiency requirements for certain product categories. Past studies have estimated the savings potential of purchasing energy-efficient products at over $500 million per year in energy costs across federal agencies.1 Despite the strong policy support for EEPP and resources available, energy-efficient product purchasing operates within complex decision-making processes and operational structures; implementation challenges exist that may hinder agencies’ ability to comply with purchasing requirements. The shift to purchasing green products, including energy-efficient products, relies on “buy in” from a variety of potential actors throughout different purchasing pathways. Challenges may be especially high for EEPP relative to other sustainable acquisition programs given that efficient products frequently have a higher first cost than non-efficient ones, which may be perceived as a conflict with fiscal responsibility, or more simply problematic for agency personnel trying to stretch limited budgets. Federal buyers may also face challenges in determining whether a given product is subject to EEPP requirements. Previous analysis on agency compliance with EEPP, conducted by the Alliance to Save Energy (ASE), shows that federal agencies are getting better at purchasing energy-efficient products. ASE conducted two reviews of relevant solicitations for product and service contracts listed on Federal Business Opportunities (FBO), the centralized website where federal agencies are required to post procurements greater

  19. Application of Life Cycle Measures to Increase Efficiency of Domestic Cooling Appliances

    Directory of Open Access Journals (Sweden)

    Erika ELIJOŠIŪTĖ

    2011-01-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Eco-design refers to systematic incorporation of environmental factors into the product design and development with the aim to reduce environmental impact of products throughout their whole life cycle. Electric power consumption of electrical and electronic equipment is one of the principal environmental aspects throughout the product exploitation time. The objective of this study is the application of eco-design methodology for development of improvement of domestic cooling appliances. Refrigeration systems as energy using products have a negative impact on the environment: emissions to air (including greenhouse gases, soil, water, and energy consumption on the whole. Reduction in energy consumption in product use phase is a very important issue due to both environmental impact when equipment operates and to costs of electricity. The accomplished analysis demonstrates the way how global problems related to refrigeration systems could be resolved using the life cycle assessment (LCA as a measure for finding out significant environmental impact during all product life time.

  20. Water conservation quantities vs customer opinion and satisfaction with water efficient appliances in Miami, Florida.

    Science.gov (United States)

    Lee, Mengshan; Tansel, Berrin

    2013-10-15

    During 2006-2007, Miami-Dade County, Florida, USA, provided incentives for low income and senior residents in single family homes for retrofitting with high efficiency fixtures. The participating residences were retrofitted with high-efficiency toilets, showerheads, and aerators. In 2012, a telephone survey was conducted to evaluate the satisfaction of the participants and the associated effects on water conservation practices. This study evaluates the attitudes and opinions of the participants relative to water use efficiency measures and the actual reduction in water consumption characteristics of the participating households. The participant characteristics were analyzed to identify correlations between the socio-demographic factors, program satisfaction and actual water savings. Approximately 65.5% of the survey respondents reported changes in their water use habits and 76.6% reported noticeable reduction in their water bills. The analyses showed that the satisfaction levels of the participants were closely correlated with the actual water savings. The results also showed that satisfaction level along with water saving potential (i.e., implementation of water efficiency devices) or change of water use habits has provided positive synergistic effect on actual water savings. The majority of the participants surveyed (81.3-89.1%) reported positive attitudes for water conservation incentive program and the benefits of the high efficiency fixtures.

  1. Energy efficiency of engines and appliances for transport on land, water, and in air.

    Science.gov (United States)

    Furfari, Samuele

    2016-01-01

    The transport sector is fundamental for the economy but also for personal life. With a growing population and the globalization process, it is not surprising that the demand of transport is set to grow in the near future and certainly until 2050. This paper focuses on the huge potential of progress in the sector of technology for transport. As the principal sector for transport will remain on roads, the paper emphasizes the progress in the automotive sector. Since car manufacturers are investing massively into research and technology development to offer ever more efficient cars--not only energy efficient but also efficient in terms of safety and comfort--the car of tomorrow will be very different from the present one. The increasing role of electronics in cars will synergistically cooperate with that of so-called smart cities. The potential development of methane in the transport sector, mainly used for heavy transportation is discussed.

  2. 76 FR 36908 - Draft Competition Rules for a Global Appliance Efficiency Award for Televisions

    Science.gov (United States)

    2011-06-23

    ...'s Global Energy Efficiency Challenge ( http://www.cleanenergyministerial.org ). The Clean Energy Ministerial is a global forum for accelerating the transition to clean energy technologies. SEAD's purpose is... consumption. Subsequent rounds of the awards competition will focus on other major energy-using...

  3. Federal Lighting Efficiency Program (FLEP). Volume 1. Study Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1977-05-06

    The study was conducted to develop a 10-year Federal Lighting Efficiency Program. It consisted of four analytical tasks: conduct a survey of recent lighting research and development;conduct a cost/benefit evaluation of energy-conserving options available as a result of the lighting research; develop a cost-effective Federal Lighting Efficiency Program plan based on the study results; and identify commercialization barriers that may exist that prevent widespread utilization of the energy-conserving options. The results are summarized in this volume. (ERA citation 04:044906)

  4. 中餐燃气炒菜灶热效率的提高%Increasing Thermal Efficiency of Chinese Cooking Gas Appliance

    Institute of Scientific and Technical Information of China (English)

    陈明; 段常贵; 侯根富

    2001-01-01

    现有中餐燃气炒菜灶绝大多数是采用大气式或鼓风式燃烧,其热效率较低,一般仅为20%左右,能源浪费严重。单纯从灶具的结构方面改进,很难取得突破性进展。采用以辐射传热为主的燃烧方式,是提高中餐燃气炒菜灶热效率的有效途径。%Most of Chinese cooking gas appliances in existence adoptpartially-aerated combustion or blast combustion. Its thermal efficiency is low, only about 20% commonly, wasting energy seriously. It is very difficult to improve it only from the structure of appliances. Adopting the combustion method mainly with radiation heat transfer is the effective avenue of increasing the thermal efficiency of Chinese cooking gas appliance.

  5. Evaluation of advanced technologies for residential appliances and residential and commercial lighting

    Energy Technology Data Exchange (ETDEWEB)

    Turiel, I.; Atkinson, B.; Boghosian, S.; Chan, P.; Jennings, J.; Lutz, J.; McMahon, J.; Rosenquist, G.

    1995-01-01

    Section 127 of the Energy Policy Act requires that the Department of Energy (DOE) prepare a report to Congress on the potential for the development and commercialization of appliances that substantially exceed the present federal or state efficiency standards. Candidate high-efficiency appliances must meet several criteria including: the potential exists for substantial improvement (beyond the minimum established in law) of the appliance`s energy efficiency; electric, water, or gas utilities are prepared to support and promote the commercialization of such appliances; manufacturers are unlikely to undertake development and commercialization of such appliances on their own, or development and production would be substantially accelerated by support to manufacturers. This report describes options to improve the efficiency of residential appliances, including water heaters, clothes washers and dryers, refrigerator/freezers, dishwashers, space heating and cooling devices, as well as residential and commercial lighting products. Data from this report (particularly Appendix 1)were used to prepare the report to Congress mentioned previously. For the residential sector, national energy savings are calculated using the LBL Residential Energy Model. This model projects the number of households and appliance saturations over time. First, end-use consumption is calculated for a base case where models that only meet the standard replace existing models as these reach the end of their lifetime. Second, models with efficiencies equal to the technology under consideration replace existing models that reach the end of their lifetime. For the commercial sector, the COMMEND model was utilized to project national energy savings from new technologies. In this report, energy savings are shown for the period 1988 to 2015.

  6. Energy Efficiency Appliance Standards: Where do we stand, how far can we go and how do we get there? An analysis across several economies

    Energy Technology Data Exchange (ETDEWEB)

    Letschert, Virginie E. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies.; de la Rue du Can, Stephane [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies.; McNeil, Michael A. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies.; Kalavase, Puneeth [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies.; Fan, Allison Hua [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies.; Dreyfus, Gabrielle [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Environmental Energy Technologies.

    2013-05-01

    This paper analyses several potential savings scenarios for minimum energy performance standard (MEPS) and comparable programs for governments participating i n the Super-efficient Equipment and Appliance Deployment (SEAD) Initiative, of the Clean Energy Ministerial, which represent over 60% of primary energy consumption in the world. We compare projected energy savings from the main end uses in the residential sector using three energy efficiency scenarios: (1) recent achievements, (2) cost-effective saving potential, and (3) energy efficiency technical potential. The recent achievement scenario (1) evaluates the future impact of MEPS enacted or under development between 2010 and 2012. The cost-effective potential scenario (2) identifies the maximum potential for energy efficiency that results in net benefits to the consumer. The best available technology scenario (3) re presents the full potential of energy efficiency considering best available technologies as candidates for MEPS and incentive programs. We use the Bottom Up Energy Analysis System (BUENAS), developed by Lawrence Berkeley National Laboratory in collaboration with the Collaborative Labelling and Appliances Standards Program (CLASP), to provide a consistent methodology to com pare the different scenarios. This paper focuses on the main end uses in the residential sector. The comparison of the three scenarios for each economy provides possible opportunities for scaling up current policies or implementing additional policies. This comparison across economies reveals country best practices as well as end uses that present the greatest additional potential savings. The paper describes areas where methodologies and additional policy instruments can increase penetration of energy efficient technologies. First , we summarize the barriers and provide remedial policy tools/best practices, such as techno-economic analysis, in response to each barriers that prevent economies from capturing the full cost

  7. Retrospective Evaluation of Appliance Price Trends

    Energy Technology Data Exchange (ETDEWEB)

    Dale, Larry; Antinori, Camille; McNeil, Michael; McMahon, James E.; Fujita, K. Sydny

    2008-07-20

    Real prices of major appliances (refrigerators, dishwashers, heating and cooling equipment) have been falling since the late 1970s despite increases in appliance efficiency and other quality variables. This paper demonstrates that historic increases in efficiency over time, including those resulting from minimum efficiency standards, incur smaller price increases than were expected by Department of Energy (DOE) forecasts made in conjunction with standards. This effect can be explained by technological innovation, which lowers the cost of efficiency, and by market changes contributing to lower markups and economies of scale in production of higher efficiency units. We reach four principal conclusions about appliance trends and retail price setting: 1. For the past several decades, the retail price of appliances has been steadily falling while efficiency has been increasing. 2. Past retail price predictions made by DOE analyses of efficiency standards, assuming constant prices over time, have tended to overestimate retail prices. 3. The average incremental price to increase appliance efficiency has declined over time. DOE technical support documents have typically overestimated this incremental price and retail prices. 4. Changes in retail markups and economies of scale in production of more efficient appliances may have contributed to declines in prices of efficient appliances.

  8. 75 FR 41696 - Appliance Labeling Rule

    Science.gov (United States)

    2010-07-19

    ... From the Federal Register Online via the Government Publishing Office FEDERAL TRADE COMMISSION 16 CFR Part 305 Appliance Labeling Rule AGENCY: Federal Trade Commission (``FTC'' or ``Commission... vary by region and consumer and change over time. In NEMA's view, unless shoppers make a...

  9. Oral Appliances Therapy

    Science.gov (United States)

    ... your sleep doctor may schedule you for a sleep study to verify treatment success. Follow-Up Visits Follow-up visits with your dentist will be needed to ensure the optimal fit of the oral appliance. Effective oral appliances ...

  10. Home Appliance Kingdom

    Institute of Scientific and Technical Information of China (English)

    JUMBO; ZHANG

    2007-01-01

    With 900 chain stores and three retail brands, Gome, China’s largest home appliance retail group, is pursuing grandiose dreams of becoming a home appliance kingdomOn November 22, 2006, Chinese home appliance retail heavyweights Beijing-based Gome Electri

  11. An Efficient, Scalable Time-Frequency Method for Tracking Energy Usage of Domestic Appliances Using a Two-Step Classification Algorithm

    Directory of Open Access Journals (Sweden)

    Paula Meehan

    2014-10-01

    Full Text Available Load monitoring is the practice of measuring electrical signals in a domestic environment in order to identify which electrical appliances are consuming power. One reason for developing a load monitoring system is to reduce power consumption by increasing consumers’ awareness of which appliances consume the most energy. Another example of an application of load monitoring is activity sensing in the home for the provision of healthcare services. This paper outlines the development of a load disaggregation method that measures the aggregate electrical signals of a domestic environment and extracts features to identify each power consuming appliance. A single sensor is deployed at the main incoming power point, to sample the aggregate current signal. The method senses when an appliance switches ON or OFF and uses a two-step classification algorithm to identify which appliance has caused the event. Parameters from the current in the temporal and frequency domains are used as features to define each appliance. These parameters are the steady-state current harmonics and the rate of change of the transient signal. Each appliance’s electrical characteristics are distinguishable using these parameters. There are three Types of loads that an appliance can fall into, linear nonreactive, linear reactive or nonlinear reactive. It has been found that by identifying the load type first and then using a second classifier to identify individual appliances within these Types, the overall accuracy of the identification algorithm is improved.

  12. 75 FR 78231 - Management of Energy and Water Efficiency in Federal Buildings: Availability of Guidance

    Science.gov (United States)

    2010-12-15

    ... of Energy Efficiency and Renewable Energy Management of Energy and Water Efficiency in Federal... water management. This draft guidance is available at: http://www1.eere.energy.gov/femp/pdfs/draft_EISA.... Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), Federal Energy...

  13. Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange Facilities: Best Management Practice Case Study #11: Commercial Kitchen Equipment (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-09-01

    The Exchange, formerly the Army and Air Force Exchange Service (AAFES), is a joint military activity and the U.S. Department of Defense?s (DOD) oldest and largest retailer. The Exchange is taking a leadership role in water efficiency improvements in their commercial kitchens by integrating water efficiency concepts into the organization?s overall sustainability plan and objectives.

  14. Multi-kanban mechanism for appliance disassembly

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.

    2005-11-01

    The use of household appliances continues to rise every year. A significant number of End-Of-Life (EOL) appliances are generated because of the introduction of newer models that are more attractive, efficient and affordable. Others are, of course, generated when they become non-functional. Many regulations encourage recycling of EOL appliances to reduce the amount of waste sent to landfills. In addition, EOL appliances offer the appliance manufacturing and remanufacturing industries a source of less expensive raw materials and components. For this reason product recovery has become a subject of interest during the past decade. In this paper, we study the disassembly line for appliance disassembly. We discuss and incorporate some of the complications that are inherent in disassembly line including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We show how to overcome such complications by implementing a multi-kanban system in the appliance disassembly line setting. The multi-kanban system (MKS) relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and explore the effect of product mix on performance of the traditional push system (TPS) and MKS in terms of controlling the system's inventory while attempting to achieve a decent customer service level.

  15. A versatile tool to energy efficiency. Pumps in cooling and air-conditioning appliances; Vielseitige Schluessel zur Energieeffizienz. Pumpen in der Kaelte- und Klimatechnik

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2012-10-15

    Pumps are ubiquitous in refrigeration systems and air conditioning systems. Pumps are present in large numbers particularly in large buildings with correspondent cooling demand. The used pump technology has a significant impact on the energy consumption and thus also on the efficiency of the entire system. Thus a look at the various pump types and their applications as well as electricity consumption is worthwhile. The pump expert WILO SE (Dortmund, Federal Republic of Germany) explains the basic fundamentals of pump technology.

  16. Clinical application of palatal lift appliance in velopharyngeal incompetence

    Directory of Open Access Journals (Sweden)

    S Premkumar

    2011-01-01

    Full Text Available The presence of nasal air leak in cleft palate patients with velopharyngeal incompetence leads to characteristic nasal snort. The efficacy of the palatal lift appliance in patients with adequate velopharyngeal tissue with incompetence was tested. Speech quality improved after the wearing of palatal lift appliance. Palatal lift appliances are simple and efficient in reducing the nasal air leak. Ongoing speech therapy is necessary and advised for patients receiving palatal lift.

  17. Program Potential: Estimates of Federal Energy Cost Savings from Energy Efficient Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Margaret [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fujita, K. Sydny [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-09-17

    In 2011, energy used by federal buildings cost approximately $7 billion. Reducing federal energy use could help address several important national policy goals, including: (1) increased energy security; (2) lowered emissions of greenhouse gases and other air pollutants; (3) increased return on taxpayer dollars; and (4) increased private sector innovation in energy efficient technologies. This report estimates the impact of efficient product procurement on reducing the amount of wasted energy (and, therefore, wasted money) associated with federal buildings, as well as on reducing the needless greenhouse gas emissions associated with these buildings.

  18. Federal state differentials in the efficiency of health production in Germany: an artifact of spatial dependence?

    Science.gov (United States)

    Felder, Stefan; Tauchmann, Harald

    2013-02-01

    Due to regional competition and patient migration, the efficiency of healthcare provision at the regional level is subject to spatial dependence. We address this issue by applying a spatial autoregressive model to longitudinal data from Germany at the district ('Kreis') level. The empirical model is specified to explain efficiency scores, which we derive through non-parametric order-m efficiency analysis of regional health production. The focus is on the role of health policy of federal states ('Bundesländer') for district efficiency. Regression results reveal significant spatial spillover effects. Notably, accounting for spatial dependence does not decrease but increases the estimated effect of federal states on district efficiency. It appears that genuinely more efficient states are less affected by positive efficiency spillovers, so that taking into account spatial dependence clarifies the importance of health policy at the state level.

  19. Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers

    Energy Technology Data Exchange (ETDEWEB)

    2016-07-01

    In a single year, energy-efficient product purchases could save the federal government almost a half billion dollars worth of energy. By purchasing products that exceed the minimum required efficiency levels, buyers can save the government even more energy and money. Federal employees and contractors must take an active role in ensuring that the government receives products that meet efficiency requirements. This document provides an overview of product purchasing requirements and shows you how to write compliant contracts, find funding, and confirm product compliance.

  20. Crew appliance study

    Science.gov (United States)

    Proctor, B. W.; Reysa, R. P.; Russell, D. J.

    1975-01-01

    Viable crew appliance concepts were identified by means of a thorough literature search. Studies were made of the food management, personal hygiene, housekeeping, and off-duty habitability functions to determine which concepts best satisfy the Space Shuttle Orbiter and Modular Space Station mission requirements. Models of selected appliance concepts not currently included in the generalized environmental-thermal control and life support systems computer program were developed and validated. Development plans of selected concepts were generated for future reference. A shuttle freezer conceptual design was developed and a test support activity was provided for regenerative environmental control life support subsystems.

  1. 75 FR 34657 - Energy Efficiency and Sustainable Design Standards for New Federal Buildings

    Science.gov (United States)

    2010-06-18

    ... Parts 433 and 435 RIN 1904-AC13 Energy Efficiency and Sustainable Design Standards for New Federal... proposed rulemaking (NOPR) regarding the application of sustainable design principals with respect to the... availability of the NOPR regarding the application of sustainable design principals with respect to the siting...

  2. Hair Styling Appliances

    Science.gov (United States)

    1984-01-01

    Key tool of Redken Laboratories new line of hair styling appliances is an instrument called a thermograph, a heat sensing device originally developed by Hughes Aircraft Co. under U.S. Army and NASA funding. Redken Laboratories bought one of the early models of the Hughes Probeye Thermal Video System or TVS which detects the various degrees of heat emitted by an object and displays the results in color on a TV monitor with colors representing different temperatures detected.

  3. File System Virtual Appliances

    Science.gov (United States)

    2010-05-01

    some of my closest friendships. Ashraf, Ippo and Neil made life much more fun. Mike Merideth introduced me to fine scotch, hi-fi speakers, and piano ...system virtual appliances (4) We analyze the sources of latency in traditional inter-VM communica- tion techniques and present a novel energy- and...tiple file system implementations within the Sun UNIX kernel” [52]. This was achieved through two techniques . First, outside the file system layer

  4. Research & Development Roadmap for Next-Generation Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Goetzler, William [Navigant Consulting, Inc., Burlington, MA (United States); Sutherland, Timothy [Navigant Consulting, Inc., Burlington, MA (United States); Foley, Kevin [Navigant Consulting, Inc., Burlington, MA (United States)

    2012-03-01

    Appliances present an attractive opportunity for near-term energy savings in existing building, because they are less expensive and replaced more regularly than heating, ventilation, and air-conditioning (HVAC) systems or building envelope components. This roadmap targets high-priority research and development (R&D), demonstration and commercialization activities that could significantly reduce residential appliance energy consumption. The main objective of the roadmap is to seek activities that accelerate the commercialization of high-efficiency appliance technologies while maintaining the competitiveness of American industry. The roadmap identified and evaluated potential technical innovations, defined research needs, created preliminary research and development roadmaps, and obtained stakeholder feedback on the proposed initiatives.

  5. Residential consumer's handbook for wood-fired appliances

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, D.; Maxwell, T. T.; Nunnelly, R. M.

    1981-11-01

    This manual describes the various types of wood burning appliances and accessories on the market. The characteristics of the various types of units are given to assess the best unit for a given application. Tips on selecting a unit are given. The most important overall considerations are shown to be the size (heat output) and safety features of the unit. Performance parameters, particularly heat output and efficiency, are defined. Test values for these parameters for several appliances of each type are given. This summary of results allows the various types of appliances and design features to be evaluated. This table also shows that the performance of units in a given category is very similar. Hence price, quality of construction, appearance, and type of appliance, rather than efficiency, become the most important parameters in selecting a stove in a given category.

  6. Efficiency of pendulum appliance for distalization movement of maxillary first molar%摆式矫治器远中移动上颌第一磨牙的疗效分析

    Institute of Scientific and Technical Information of China (English)

    李玉如; 赵福燕; 乔义强; 张小君; 霍雷

    2012-01-01

    目的:研究摆式矫治器远中移动上颌第一磨牙的疗效.方法:选择混合牙列或恒牙列早期的牙源性安氏Ⅱ类错牙 合伴上颌牙列轻中度拥挤的16例患者,应用摆式矫治器远中移动上颌第一磨牙.分别在应用摆式矫治器前、上颌磨牙远移至上下颌第一磨牙中性偏近中关系时拍摄头颅定位侧位片,分析矫治前后牙齿测量项目、骨骼及软组织测量项目的变化.结果:16例经过(5.1±1.4)个月的矫治,上颌第一磨牙远移至上下颌第一磨牙呈中性偏近中关系.矫治后,前牙覆盖增加,覆牙 合减小;上唇突度增加;下后面高距、下颌综合长度、升支高度有所增加,而上下颌骨变化较小.结论:摆式矫治器远中移动上颌第一磨牙疗效可靠,可用于牙源性安氏Ⅱ类错牙 合的矫治.%To study the efficiency of pendulum appliance for maxillary first molars distalization. Methods: Sixteen adolescent patients with odontogenic Angle class II malocclusion and mild or moderate maxillary dental crowding were corrected with pendulum appliance for maxillary first molar distalization. Cephalometric films were taken before the treatment and when the relationship of upper/lower first molars was neutral or nearly neutral. Results: After (5.1 ±1.4) months, the relationship of upper/lower first molars was neutral or nearly neutral. The overjet increased and the overbite decreased. The upper lip protrusion increased. S-Go, Co-Gn, and Go-Ar increased. The changes of skeletal components were little. Conclusion:The pendulum appliance can distalize the upper molars effectively for the odontogenic Angle class II malocclusion.

  7. Estimating Price Elasticity using Market-Level Appliance Data

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, K. Sydny [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-08-04

    This report provides and update to and expansion upon our 2008 LBNL report “An Analysis of the Price Elasticity of Demand for Appliances,” in which we estimated an average relative price elasticity of -0.34 for major household appliances (Dale and Fujita 2008). Consumer responsiveness to price change is a key component of energy efficiency policy analysis; these policies influence consumer purchases through price both explicitly and implicitly. However, few studies address appliance demand elasticity in the U.S. market and public data sources are generally insufficient for rigorous estimation. Therefore, analysts have relied on a small set of outdated papers focused on limited appliance types, assuming long-term elasticities estimated for other durables (e.g., vehicles) decades ago are applicable to current and future appliance purchasing behavior. We aim to partially rectify this problem in the context of appliance efficiency standards by revisiting our previous analysis, utilizing data released over the last ten years and identifying additional estimates of durable goods price elasticities in the literature. Reviewing the literature, we find the following ranges of market-level price elasticities: -0.14 to -0.42 for appliances; -0.30 to -1.28 for automobiles; -0.47 to -2.55 for other durable goods. Brand price elasticities are substantially higher for these product groups, with most estimates -2.0 or more elastic. Using market-level shipments, sales value, and efficiency level data for 1989-2009, we run various iterations of a log-log regression model, arriving at a recommended range of short run appliance price elasticity between -0.4 and -0.5, with a default value of -0.45.

  8. Non-Intrusive Appliance Recognition

    NARCIS (Netherlands)

    Hoogsteen, G; Hoogsteen, Gerwin; Krist, J.O.; Bakker, Vincent; Smit, Gerardus Johannes Maria

    2012-01-01

    Energy conservation becomes more important nowadays. The use of smart meters and, in the near future, smart appliances, are the key to achieve reduction in energy consumption. This research proposes a non-intrusive appliance monitor and recognition system for implementation on an embedded system. Th

  9. Documentation of Appliances & Interaction Devices

    DEFF Research Database (Denmark)

    2004-01-01

    The interaction devices and appliances explored in the WorkSPACE project, address spatial computing in the context of work. We have developed and explored a range of appliances and interaction devices. The scope has been to develop tools for support of collaboration by mixing digital and physical...

  10. Documentation of Appliances & Interaction Devices

    DEFF Research Database (Denmark)

    2004-01-01

    The interaction devices and appliances explored in the WorkSPACE project, address spatial computing in the context of work. We have developed and explored a range of appliances and interaction devices. The scope has been to develop tools for support of collaboration by mixing digital and physical...

  11. Remote Control of Home Appliances

    Directory of Open Access Journals (Sweden)

    Mayola Reena Fernandes

    2014-06-01

    Full Text Available The paper entitled "Remote Control of Home Appliances" aims at providing access to home appliances from a far-off location over the Internet. The paper is designed and implemented to achieve control on the appliances such as light bulbs, fans, serial lights and a dot-matrix display over the internet. The paper is deployed by dividing it into three major modules namely Input, Computation and Output where the modules interact with each other to bring out the overall functionality the paper desires to. The significance of implementing the paper is, the remote control of home appliances over the internet. The other important advantages are: It eliminates re-programming the microcontroller of the dot-matrix display and also it eliminates the need for a person to be present to operate and control any of the home appliances, thus reducing the labor.

  12. Estimation of Standby Power Consumption for Typical Appliances

    Directory of Open Access Journals (Sweden)

    P. Philomen-D-Anand Raj

    2009-01-01

    Full Text Available In the past days, many consumers could simply unplug their appliances and go on holidays, assuming that their electricitymeter would just stop. Standby power is a power consumed by an appliance when switched off or not performing its primaryfunctions. Standby power consumption provides good opportunity for reducing both energy consumption and green housegas emissions. Through co-operation among governments, industry and consumers and the co-ordination of internationalpolicies, standby modes can be made more efficient, thereby reducing the overall demand for power.In this paper, standby power consumption of various domestic appliances was determined using an energy cost meter. Theexperimental results shows that the standby power of various house hold electrical appliances is consuming more electricityduring standby mode

  13. Improved Appliance Coordination Scheme with Waiting Time in Smart Grids

    Directory of Open Access Journals (Sweden)

    Firas A. Al Balas

    2016-04-01

    Full Text Available Smart grids aim to merge the advances in communications and information technologies with traditional power grids. In smart grids, users can generate energy and sell it to the local utility supplier. The users can reduce energy consumption by shifting appliances’ start time to off-peak hours. Many researchers have proposed techniques to reduce the previous issue for home appliances, such as the Appliances Coordination (ACORD scheme and Appliances Coordination with Feed In (ACORD-FI scheme. The goal of this work is to introduce an efficient scheme to reduce the total cost of energy bills by utilizing the ACORD-FI scheme to obtain an effective solution. In this work three scheduling schemes are proposed: the Appliances Coordination by Giving Waiting Time (ACORD-WT, the Appliances Coordination by Giving Priority (ACORD-P, and using photovoltaic (PV with priority and waiting time scheduling algorithms. A simulator written in C++ is used to test the performance of the proposed schemes using. The performance metric used is the total savings in the cost of the energy bill in dollars. The first comparison for the proposed schemes with the ACORD-FI, and the results show that the efficiency of the proposed ACORD-WT is better than the ACORD-FI, regardless of the number of appliances. Moreover, the proposed ACORD-P, is also better than the standard ACORD-FI.

  14. DOE-HUD initiative on energy efficiency in housing: A federal partnership

    Energy Technology Data Exchange (ETDEWEB)

    Brinch, J. [Energetics, Inc., Columbia, MD (United States); Ternes, M. [Oak Ridge National Lab., TN (United States); Myers, M. [USDOE, Washington, DC (United States)

    1996-07-01

    A five-year initiative between the US Department of Energy (DOE) and the US Department of Housing and Urban Development (HUD) demonstrated the feasibility of improving the energy efficiency of publicly-assisted housing. Twenty-seven projects and activities undertaken during 1990--95 involved research and field demonstrations, institutional and administrative changes to HUD policies and procedures, innovative financing and leveraging of federal dollars with non-federal money, and education, training, and technical assistance. With most of the 27 projects and activities completed, the two departments have initiated a five-year deployment effort, the DOE-Energy Partnerships for Affordable Homes, to achieve energy and water savings in public and assisted housing on a large scale throughout the country. A Clearinghouse for Energy Efficiency in Public and Assisted Housing managed by the National Center for Appropriate Technology (NCAT), will offer hands-on energy assistance to housing providers to complement DOE`s assistance. This paper presents the findings of the DOE-HUD Initiative, with primary attention paid to those projects which successfully integrated energy efficiency into private and public single and multifamily housing. The paper includes examples of the publications, case-study reports, exhibits and videotapes developed during the course of the Initiative. Information on the new DOE Energy Partnerships and on the NCAT Clearinghouse is also presented. New Partnership projects with the Atlanta and Chicago Housing Authorities describe the technical assistance envisioned under the Partnership.

  15. Comparison of Roth appliance and standard edgewise appliance treatment results.

    Science.gov (United States)

    Kattner, P F; Schneider, B J

    1993-01-01

    A retrospective comparison of Roth appliance and standard edgewise appliance treatment results was made using two indices. The first, the ideal tooth relationship index (ITRI), scored dental casts for the presence of ideal tooth contacts. The second judged posttreatment dental casts on the basis of criteria established by Andrews in his "Six Keys to Normal Occlusion." The sample consisted of 120 orthodontically treated cases completed by two practitioners who have used both the Roth and standard edgewise appliances. Thirty cases of each appliance type were collected from each practitioner. The overall posttreatment ITRI percentage scores showed no significant differences between the appliances. Practitioner differences existed for the anterior intraarch, anterior interarch, and posterior buccal interarch relationships. These differences were related to both treatment time and finishing arch wire size. The results of the Six Keys Analysis showed that the angulation and inclination of the maxillary posterior teeth were better with the Roth appliance. However, success in achieving some components of the six keys did not translate into an increased percentage of ideal tooth contacts as measured by the ITRI. Despite using the Roth appliance, experienced clinicians still found it difficult to achieve all six keys to normal occlusion.

  16. Federal Health Care Center: VA and DOD Need to Develop Better Information to Monitor Operations and Improve Efficiency

    Science.gov (United States)

    2017-01-01

    requirement to include two more reports, resulting in GAO reports in 2011, 2012, and 2016. 5GAO, VA and DOD Health Care: First Federal Health ...FEDERAL HEALTH CARE CENTER VA and DOD Need to Develop Better Information to Monitor Operations and Improve Efficiency...Government Accountability Office Highlights of GAO-17-197, a report to congressional committees January 2017 FEDERAL HEALTH CARE CENTER VA and DOD

  17. The Efficiency of Federal Subsidies to Medical Education. Health Manpower Policy Discussion Paper Series. No.: A8.

    Science.gov (United States)

    Wright, George E., Jr.

    This paper focuses on the efficiency of federal subsidies in meeting stated public goals and gives two reasons for doing so. First, specific data on subsidies for the education function of medical schools are available. Second, Congress is now considering the entire package of federal health manpower legislation. It is difficult to escape the…

  18. 76 FR 49279 - Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise...

    Science.gov (United States)

    2011-08-10

    ... 1904-AC41 Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise... such buildings be designed to achieve energy consumption levels that are at least 30 percent below the... parts 433 and 435. Section 306(a) of ECPA provides that each Federal agency and the Architect of...

  19. DOE-HUD Initiative on Energy Efficiency in Housing: A federal partnership. Program summary report

    Energy Technology Data Exchange (ETDEWEB)

    Brinch, J. [Energetics, Inc., Columbia, MD (United States)

    1996-06-01

    One of the primary goals of the US Department of Housing and urban Development (HUD) is the expansion of home ownership and affordable housing opportunities. Recognizing that energy efficiency is a key component in an affordable housing strategy, HUD and the US Department of Energy (DOE) created the DOE-HUD Initiative on Energy Efficiency in Housing. The DOE-HUD Initiative was designed to share the results of DOE research with housing providers throughout the nation, to reduce energy costs in federally-subsidized dwelling units and improve their affordability and comfort. This Program Summary Report provides an overview of the DOE-HUD Initiative and detailed project descriptions of the twenty-seven projects carried out with Initiative funding.

  20. Analysis of federal policy options for improving US lighting energy efficiency: Commercial and residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, B.A.; McMahon, J.E.; Mills, E.; Chan, P.; Chan, T.W.; Eto, J.H.; Jennings, J.D.; Koomey, J.G.; Lo, K.W.; Lecar, M.; Price, L.; Rubinstein, F.; Sezgen, O.; Wenzel, T.

    1992-12-01

    The US Department of Energy (DOE) has recognized the opportunity to achieve energy, economic, and environmental benefits by promoting energy-efficient lighting through federal policies, including lighting standards, financial incentives, and information programs. To assist in this process, the Office of Conservation and Renewable Energy's Office of Codes and Standards invited Lawrence Berkeley Laboratory to assess prospective national impacts for a variety of policy options. Some progress has already been made in developing lighting policies at both the federal and state levels. The US DOE's Office of Building Technologies has evaluated lighting efficiency incentives as part of its analysis for the National Energy Strategy. Fluorescent and incandescent lamp standards are included in the national Energy Policy Act of 1992 (P.L. 102-486, October 24, 1992). A few states have analyzed or implemented lamp and luminaire standards. Many policy-related issues merit further investigation. For example, there is considerable debate over issues such as mandatory or voluntary standards versus component labeling and other education-oriented strategies. Several different technologies are involved that interact with each other-lamps (incandescent, compact fluorescent, and HID), ballasts (for fluorescent and HID lamps), and fixtures with reflectors and lenses. Control systems and operation patterns must also be considered (timers, automated dimming, or occupancy sensors). Lighting applications are diverse, ranging from offices, restaurants, hallways, hospital operating rooms, to exterior lights. Lighting energy use influences heating and cooling requirements in buildings. Successful lighting system design must also address interactions between architectural design elements and daylighting availability. Proper system installation and ongoing operation and maintenance are crucial. The economic aspects of the preceding points must also be considered for policy making.

  1. Analysis of federal policy options for improving US lighting energy efficiency: Commercial and residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, B.A.; McMahon, J.E.; Mills, E.; Chan, P.; Chan, T.W.; Eto, J.H.; Jennings, J.D.; Koomey, J.G.; Lo, K.W.; Lecar, M.; Price, L.; Rubinstein, F.; Sezgen, O.; Wenzel, T.

    1992-12-01

    The US Department of Energy (DOE) has recognized the opportunity to achieve energy, economic, and environmental benefits by promoting energy-efficient lighting through federal policies, including lighting standards, financial incentives, and information programs. To assist in this process, the Office of Conservation and Renewable Energy`s Office of Codes and Standards invited Lawrence Berkeley Laboratory to assess prospective national impacts for a variety of policy options. Some progress has already been made in developing lighting policies at both the federal and state levels. The US DOE`s Office of Building Technologies has evaluated lighting efficiency incentives as part of its analysis for the National Energy Strategy. Fluorescent and incandescent lamp standards are included in the national Energy Policy Act of 1992 (P.L. 102-486, October 24, 1992). A few states have analyzed or implemented lamp and luminaire standards. Many policy-related issues merit further investigation. For example, there is considerable debate over issues such as mandatory or voluntary standards versus component labeling and other education-oriented strategies. Several different technologies are involved that interact with each other-lamps (incandescent, compact fluorescent, and HID), ballasts (for fluorescent and HID lamps), and fixtures with reflectors and lenses. Control systems and operation patterns must also be considered (timers, automated dimming, or occupancy sensors). Lighting applications are diverse, ranging from offices, restaurants, hallways, hospital operating rooms, to exterior lights. Lighting energy use influences heating and cooling requirements in buildings. Successful lighting system design must also address interactions between architectural design elements and daylighting availability. Proper system installation and ongoing operation and maintenance are crucial. The economic aspects of the preceding points must also be considered for policy making.

  2. International Comparison of Product Certification and Verification Methods for Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zheng, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  3. International comparison of product certification and verification methods for appliances

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zheng, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  4. The Next Generation of Appliances: Visions for Sustainability

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen; Guldbrandsen, Tom

    1998-01-01

    to consume no more than 50 kWh per year, without using any risky synthetic gasses. Washing appliances will use no electricity for heating, which will bring annual electricity consumption below 50 kWh for a washing machine. For electronic equipment, the efficiency gain known from battery operated version...

  5. Assessment of Literature Related to Combustion Appliance Venting Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, V. H.; Less, B. D.; Singer, B. C.; Stratton, J. C.; Wray, C. P.

    2015-02-01

    In many residential building retrofit programs, air tightening to increase energy efficiency is often constrained by safety concerns with naturally vented combustion appliances. Tighter residential buildings more readily depressurize when exhaust equipment is operated, making combustion appliances more prone to backdraft or spill combustion exhaust into the living space. Several measures, such as installation guidelines, vent sizing codes, and combustion safety diagnostics, are in place with the intent to prevent backdrafting and combustion spillage, but the diagnostics conflict and the risk mitigation objective is inconsistent. This literature review summarizes the metrics and diagnostics used to assess combustion safety, documents their technical basis, and investigates their risk mitigations. It compiles information from the following: codes for combustion appliance venting and installation; standards and guidelines for combustion safety diagnostics; research evaluating combustion safety diagnostics; research investigating wind effects on building depressurization and venting; and software for simulating vent system performance.

  6. Preformed beading and boxing appliance.

    Science.gov (United States)

    Reddy, J Sashi Deepth; Padmanabhan, T V; Veerareddy, Chandrika; Chandrasekhar, M; Narendra, R

    2013-03-01

    Conventional beading and boxing procedure is time consuming and involves application of heat that might distort green stick compound used for border molding. Earlier studies regarding beading and boxing methods have shown usage of various materials that were disposable and that cannot be recycled. To reduce the time consumed for beading and boxing procedure and to make this procedure cost-effective by using recyclable beading material, "Preformed boxing appliance" with moldable clay meant for beading the secondary impression was used. Secondary impression was supported by 3 studs provided on the floor of the boxing appliance. The cast was poured. The duration for the entire procedure was much less than the conventional procedure.

  7. Habit Breaking Appliance for Multiple Corrections

    OpenAIRE

    Reji Abraham; Geetha Kamath; Jasmeet Singh Sodhi; Sonia Sodhi; Chandki Rita; Sai Kalyan, S.

    2013-01-01

    Tongue thrusting and thumb sucking are the most commonly seen oral habits which act as the major etiological factors in the development of dental malocclusion. This case report describes a fixed habit correcting appliance, Hybrid Habit Correcting Appliance (HHCA), designed to eliminate these habits. This hybrid appliance is effective in less compliant patients and if desired can be used along with the fixed orthodontic appliance. Its components can act as mechanical restrainers and muscle ret...

  8. Efficacy of custom made oral appliance for treatment of obstructive sleep apnea

    Directory of Open Access Journals (Sweden)

    V R Cilil

    2015-01-01

    Full Text Available Introduction: oral appliance for the treatment of OSA is considered as an effective, low-risk alternative to CPAP. Demand for oral appliance increases as an alternative for those who cannot tolerate CPAP and refuse surgery. Oral appliances uses the traditional methods to advance the mandible thus modify the posture and their by enlarge the airway or otherwise reduce the collapsibility. Aims and Objectives: The main objective of this study was to evaluate the efficacy of custom made oral appliance on sleep characteristics of OSA patients. Materials and Methods: Polysomnography was done on 15 patients of 24-60 years of age before (T1, and after the delivery of the custom made oral appliance (T2. Statistical Analysis: Paired t tests were performed to determine the significance of change in the polysomnographic and cephalometric variables. P < 0.05 was considered as significant. Results: All patients with oral appliance showed an improvement in sleep parameters with an increase in sleep efficiency, and desaturation index with the use of oral appliance. ESS and cephalometric findings showed improvement in the sleep apnea in concordance with the sleep parameters. Conclusions: Custom made oral appliance is a useful treatment option for improving quality of sleep and can be considered as an alternative treatment modality.

  9. Assessment of Literature Related to Combustion Appliance Venting Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, Vi H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stratton, Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wray, Craig P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    In many residential building retrofit programs, air tightening to increase energy efficiency is constrained by concerns about related impacts on the safety of naturally vented combustion appliances. Tighter housing units more readily depressurize when exhaust equipment is operated, making combustion appliances more prone to backdraft or spillage. Several test methods purportedly assess the potential for depressurization-induced backdrafting and spillage, but these tests are not robustly reliable and repeatable predictors of venting performance, in part because they do not fully capture weather effects on venting performance. The purpose of this literature review is to investigate combustion safety diagnostics in existing codes, standards, and guidelines related to combustion appliances. This review summarizes existing combustion safety test methods, evaluations of these test methods, and also discusses research related to wind effects and the simulation of vent system performance. Current codes and standards related to combustion appliance installation provide little information on assessing backdrafting or spillage potential. A substantial amount of research has been conducted to assess combustion appliance backdrafting and spillage test methods, but primarily focuses on comparing short-term (stress) induced tests and monitoring results. Monitoring, typically performed over one week, indicated that combinations of environmental and house operation characteristics most conducive to combustion spillage were rare. Research, to an extent, has assessed existing combustion safety diagnostics for house depressurization, but the objectives of the diagnostics, both stress and monitoring, are not clearly defined. More research is also needed to quantify the frequency of test “failure” occurrence throughout the building stock and assess the statistical effects of weather (especially wind) on house depressurization and in turn on combustion appliance venting

  10. Emergencies in Orthodontics. Part 2: Management of Removable Appliances, Functional Appliances and other Adjuncts to Orthodontic Treatment.

    Science.gov (United States)

    Dowsing, Paul; Murray, Alison; Sandler, Jonathan

    2015-04-01

    In the second of two papers, management of orthodontic emergencies involving appliances other than Fixed appliances will be detailed. Problems relating to removable appliances, as well as other orthodontic adjuncts, will be discussed. Unfortunately, orthodontic appliance breakage does occur, despite the clinicians giving clear and concise instructions to the patients and their parents at fitting. If general dental practitioners have a practical knowledge of how to diagnose problems and to provide appropriate advice or timely 'emergency' treatment, this will significantly reduce the inconvenience for all parties concerned. It should also ensure that treatment progresses in the most efficient and comfortable manner for their patients. In specific situations the early, accurate identification of the problem and instigation of its appropriate management can avoid more serious consequences. Clinical Relevance: Appropriate handling of an orthodontic 'emergency' by the dentist can, on many occasions, provide immediate relief to the patient. This will, in turn, allow treatment to continue in the right direction, thus allowing more efficient and effective use of valuable resources.

  11. Leaking electricity in domestic appliances

    Energy Technology Data Exchange (ETDEWEB)

    Meier, Alan; Rosen, Karen

    1999-05-01

    Many types of home electronic equipment draw electric power when switched off or not performing their principal functions. Standby power use (or ''leaking electricity'') for most appliances ranges from 1 - 20 watts. Even though standby use of each device is small, the combined standby power use of all appliances in a home can easily exceed 50 watts. Leaking electricity is already responsible for 5 to 10 percent of residential electricity use in the United States and over 10 percent in Japan. An increasing number of white goods also have standby power requirements. There is a growing international effort to limit standby power to around one watt per device. New and existing technologies are available to meet this target at little or no extra cost.

  12. Batch-oriented software appliances

    CERN Document Server

    Murri, Riccardo

    2012-01-01

    This paper presents AppPot, a system for creating Linux software appliances. AppPot can be run as a regular batch or grid job and executed in user space, and requires no special virtualization support in the infrastructure. The main design goal of AppPot is to bring the benefits of a virtualization-based IaaS cloud to existing batch-oriented computing infrastructures. In particular, AppPot addresses the application deployment and configuration on large heterogeneous computing infrastructures: users are enabled to prepare their own customized virtual appliance for providing a safe execution environment for their applications. These appliances can then be executed on virtually any computing infrastructure being in a private or public cloud as well as any batch-controlled computing clusters the user may have access to. We give an overview of AppPot and its features, the technology that makes it possible, and report on experiences running it in production use within the Swiss National Grid infrastructure SMSCG.

  13. Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Zogg, Robert [Navigant Consulting, Inc., Burlington, MA (United States); Goetzler, William [Navigant Consulting, Inc., Burlington, MA (United States); Ahlfeldt, Christopher [Navigant Consulting, Inc., Burlington, MA (United States); Hiraiwa, Hirokazu [Navigant Consulting, Inc., Burlington, MA (United States); Sathe, Amul [Navigant Consulting, Inc., Burlington, MA (United States); Sutherland, Timothy [Navigant Consulting, Inc., Burlington, MA (United States)

    2009-12-01

    This study characterizes and assesses the appliances used in commercial buildings. The primary objectives of this study were to document the energy consumed by commercial appliances and identify research, development and demonstration (RD&D) opportunities for efficiency improvements, excluding product categories such as HVAC, building lighting, refrigeration equipment, and distributed generation systems. The study included equipment descriptions, characteristics of the equipment’s market, national energy consumption, estimates of technical potential for energy-saving technologies, and recommendations for U.S. Department of Energy programs that can promote energy savings in commercial appliances.

  14. Optimal Scheduling of Domestic Appliances via MILP

    Directory of Open Access Journals (Sweden)

    Zdenek Bradac

    2014-12-01

    Full Text Available This paper analyzes a consumption scheduling mechanism for domestic appliances within a home area network. The aim of the proposed scheduling is to minimize the total energy price paid by the consumer and to reduce power peaks in order to achieve a balanced daily load schedule. An exact and computationally efficient mixed-integer linear programming (MILP formulation of the problem is presented. This model is verified by several problem instances. Realistic scenarios based on the real price tariffs commercially available in the Czech Republic are calculated. The results obtained by solving the optimization problem are compared with a simulation of the ripple control service currently used by many domestic consumers in the Czech Republic.

  15. Turning the Appliance Market Around towards A++

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen; Brange, Birgitte; Guldbrandsen, Tom

    2007-01-01

    are described in the paper and some conclusions are drawn. The campaigns have consisted of various elements, namely 1) a general information about the campaigns, 2) a subsidy offered temporarily during some months to people buying the A, A+ and A++ models, 3) a website where people can easily find the most...... energy efficient model within their specification, and 4) in the website are also listed the shops, where consumers can get the appliances at lowest prices. The latter was the most innovative and maybe also the most effective measure in the package. Results showed up as a permanent U-turn of the market...... in the course of a few years. Where models C, D, E earlier dominated the market, the A, A+ and A++, came to dominate as the standard models in stock. Consequently, their prices dropped significantly. The theory of a rational market behavior is based on some assumptions, one being that full information...

  16. Paper de recherche no. 28 Bis. Can negotiated agreements replace efficiency standards as an instrument for transforming the electrical appliance market?; Cahier de recherche no. 28. Les accords negocies peuvent-ils remplacer les normes de performance pour la transformation du marche de l'electromenager

    Energy Technology Data Exchange (ETDEWEB)

    Menanteau, Ph.

    2002-03-01

    Without reinforced energy saving policies, residential consumption of electricity will increase sharply over the next twenty years, in particular as a result of expected growth in the specific uses of electricity. The main problem is not a lack of energy efficient technologies, which do indeed exist for electrical appliances, but one of slow diffusion of existing technologies due to the weakness of the price signal and the purchasing behaviour of consumers. In association with energy labelling, minimum efficiency performance standards have proved to be very effective in stimulating technological progress and organizing market transformation. But standards also suffer from long and often difficult implementation periods because of the resistance of the industrial sector. For manufacturers, similar results could be obtained more easily and more rapidly with voluntary agreements because they introduce flexibility margins in the achievement of commitments. This paper analyses the specific advantages of voluntary agreements for improving energy efficiency in the domestic appliances sector. We conclude that voluntary agreements may be an effective instrument for market transformation in certain conditions, but the alternative of regulatory measures must remain a credible, realistic threat if voluntary agreements are to have a really significant impact on performance improvement. (author)

  17. Energy efficiency in the 6th Energy Research Programme of the German federal government; Energieeffizienz im 6. Energieforschungsprogramm der Bundesregierung

    Energy Technology Data Exchange (ETDEWEB)

    Tryfonidou, Rodoula [Bundesministerium fuer Wirtschaft und Energie, Bonn (Germany). Energieforschung; Semke, Sabine [Forschungszentrum Juelich GmbH (Germany). Geschaeftsbereich Energietechnologien; Froehlich, Thorsten; Sachse, Michael [Forschungszentrum Juelich GmbH (Germany). Projekttraeger Juelich; Gail, Rene [Forschungszentrum Juelich GmbH (Germany). Fachbereich Energieeffizienz in Industrie und Gewerbe

    2014-03-15

    By embarking on its energy turnaround policy the German government has started a new chapter in the history of energy, a step that is attracting worldwide attention. While the phase-out of nuclear energy and the expansion of renewable energies serve as mainstays, the real challenge, on which the success of the energy turnaround hinges, and which is not merely of a technological nature, is to bring about massive improvements in energy efficiency. This article gives an overview of selected focal areas of the federal government's energy research policy, especially in the area of energy efficiency.

  18. 75 FR 29933 - Energy Efficiency and Sustainable Design Standards for New Federal Buildings

    Science.gov (United States)

    2010-05-28

    ... establish revised performance standards for the construction of new Federal buildings and major renovations... for green buildings that encourages a comprehensive and environmentally-sound approach to certification of green buildings. DATES: Public comments on this proposed rule will be accepted until July...

  19. 75 FR 17700 - Energy Efficient Building Systems Regional Innovation Cluster Initiative-Joint Federal Funding...

    Science.gov (United States)

    2010-04-07

    ... organizations, and other interested parties to learn more about the Joint Federal Funding Opportunity... work to disseminate new technologies into the marketplace and share best practices with the public and... multidisciplinary team of researchers ideally working under one roof to conduct high-risk, high-reward research that...

  20. Habit Breaking Appliance for Multiple Corrections

    Directory of Open Access Journals (Sweden)

    Reji Abraham

    2013-01-01

    Full Text Available Tongue thrusting and thumb sucking are the most commonly seen oral habits which act as the major etiological factors in the development of dental malocclusion. This case report describes a fixed habit correcting appliance, Hybrid Habit Correcting Appliance (HHCA, designed to eliminate these habits. This hybrid appliance is effective in less compliant patients and if desired can be used along with the fixed orthodontic appliance. Its components can act as mechanical restrainers and muscle retraining devices. It is also effective in cases with mild posterior crossbites.

  1. Photovoltaic power supply for appliances and small systems. Final report; Photovoltaik fuer Geraete und Kleinsysteme. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Roth, W.; Anton, L.; Benz, J.; Kaiser, R.; Kuhmann, J.; Puls, H.G.; Pfanner, N.; Schmidt, H.; Schulz, W.; Steinhueser, A.

    2002-06-01

    The economic prospects of PV power supply to appliances and small systems were investigated. The research project was aimed at improving the conditions for efficient development of appliances and small systems with photovoltaic power supply and autonomous systems not connected to the grid. Innovative products were developed and tested in cooperation with industrial organizations. The project is to help small and medium-sized organizations with a technological orientation and enhance technology transfer between science and industry.

  2. Exploration on the Development of Waste Household Appliance Reverse Logistics

    Institute of Scientific and Technical Information of China (English)

    刘云; 王志玲

    2014-01-01

    China is not only the largest producer of electrical and electronic products, but also a big consumer. Over a long time, many products have reached the peak of being abandoned, with the increasingly awareness of environmental protection, developing an efficient recycling logistics system can not be delayed. It mainly leads to the concept of reverse logistics through analyzing the current situation of waste household appliances, and puts forward several suggestions for the current status and future development of reverse logistics.

  3. An Energy Efficient Protocol for Gateway-Centric Federated Residential Access Networks

    CERN Document Server

    Rossi, Claudio; Chiasserini, Carla-Fabiana

    2011-01-01

    The proliferation of overlapping, always-on IEEE 802.11 Access Points (APs) in urban areas can cause spectrum sharing conflicts, inefficient bandwidth usage and power waste. Cooperation among APs could address these problems (i) by allowing under-used devices to hand over their clients to nearby APs and temporarily switch off, (ii) by balancing the load of clients among APs and thus offloading congested APs. The federated houses model provides an appealing backdrop to implement cooperation among APs. In this paper, we outline a framework that, assuming the presence of a multipurpose gateway with AP capabilities in every household, allows such cooperation through the monitoring of local wireless resources and the triggering of offloading requests toward other federated gateways. We then present simulation results in realistic settings that provide some insight on the capabilities of our framework.

  4. Gesture & Speech Based Appliance Control

    Directory of Open Access Journals (Sweden)

    Dr. Sayleegharge,

    2014-01-01

    Full Text Available This document explores the use of speech & gestures to control home appliances. Aiming at the aging population of the world and relieving them from their dependencies. The two approaches used to sail through the target are the MFCC approach for speech processing and the Identification of Characteristic Point Algorithm for gesture recognition. A barrier preventing wide adoption is that this audience can find controlling assistive technology difficult, as they are less dexterous and computer literate. Our results hope to provide a more natural and intuitive interface to help bridge the gap between technology and elderly users.

  5. 24 CFR 3280.714 - Appliances, cooling.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Appliances, cooling. 3280.714... URBAN DEVELOPMENT MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS Heating, Cooling and Fuel Burning Systems § 3280.714 Appliances, cooling. (a) Every air conditioning unit or a combination air...

  6. Hydrophilic structures for condensation management in appliances

    Science.gov (United States)

    Kuehl, Steven John; Vonderhaar, John J.; Wu, Guolian; Wu, Mianxue

    2016-02-02

    An appliance that includes a cabinet having an exterior surface; a refrigeration compartment located within the cabinet; and a hydrophilic structure disposed on the exterior surface. The hydrophilic structure is configured to spread condensation. The appliance further includes a wicking structure located in proximity to the hydrophilic structure, and the wicking structure is configured to receive the condensation.

  7. 75 FR 7464 - Energy Efficient Building Systems Regional Innovation Cluster Initiative-Joint Federal Funding...

    Science.gov (United States)

    2010-02-19

    ... the area, the E-RIC will create an economically dynamic region focused on energy efficient buildings... that span basic research to engineering development to commercialization readiness. The Hub will...

  8. Minat Masyarakat dalam Menggunakan Smart Appliances

    Directory of Open Access Journals (Sweden)

    Diah Yuniarti

    2014-09-01

    Full Text Available Harga sumber energi yang semakin naik dari tahun ke tahun dan kemajuan teknologi telah mendorong perkembangan smart grid. Smart appliance merupakan salah satu komponen penting dalam smart grid. Penerapan smart appliance sejalan dengan kebijakan untuk mengurangi konsumsi energi, mengurangi emisi karbon dan penyediaan energi dari energi terbarukan. Penetrasi telepon bergerak turut memudahkan manajemen energi dan otomatisasi home appliance. Penelitian ini dilakukan untuk menganalisis minat masyarakat, yang merupakan aktor aktif dalam konsumsi dan manajemen energi di rumah tangga. Data penelitian dianalisis  dengan menggunakan metode structural equation modeling (SEM Hasil penelitian menunjukkan bahwa variabel enjoyment memiliki pengaruh yang signifikan terhadap minat dalam menggunakan smart appliance. Sedangkan, variabel compatibility ease of use, relative advantage dan image tidak memiliki pengaruh yang signifikan terhadap minat menggunakan smart appliance.

  9. 75 FR 11939 - Fisher & Paykel Appliances, Inc., Huntington Beach, CA; Notice of Termination of Investigation

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Fisher & Paykel Appliances, Inc., Huntington Beach, CA; Notice of Termination of Investigation Pursuant to Section 221 of the Trade Act of 1974, as amended, an...

  10. Financial Impact of Energy Efficiency under a Federal Renewable Electricity Standard: Case Study of a Kansas"super-utility"

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, Charles A.; Cappers, Peter

    2009-12-01

    Local, state and federal policies that jointly promote the generation of electricity from renewable technologies and the pursuit of energy efficiency are expected to help mitigate the detrimental effects of global climate change and foster energy independence. We examine the financial impacts on various stakeholders from alternative compliance strategies with a Combined Efficiency and Renewable Electricity Standard (CERES) using a case study approach for utilities in Kansas. If only supply-side options are considered, our analysis suggests that a Kansas"super-utility" would prefer to build its own renewable energy resources, while ratepayers would favor a procurement strategy that relies on long-term renewable power purchase agreements. Introducing energy efficiency under varying levels as a CERES resource will, under our analysis, reduce ratepayer bills by ~;;$400M to ~;;$1.0B between 2009 and 2028, but commensurately erode shareholder returns by ~;;10 to ~;;100 basis points. If a business model for energy efficiency inclusive of both a lost fixed cost recovery mechanism and a shareholder incentive mechanism is implemented, our results illustrate how shareholder returns can be improved through the pursuit of energy efficiency, by at most ~;;20 basis points if certain conditions apply, while ratepayers continue to save between $10M and ~;;$840M over 20 years.

  11. ENERGY EFFICIENT LAUNDRY PROCESS

    Energy Technology Data Exchange (ETDEWEB)

    Tim Richter

    2005-04-01

    With the rising cost of energy and increased concerns for pollution and greenhouse gas emissions from power generation, increased focus is being put on energy efficiency. This study looks at several approaches to reducing energy consumption in clothes care appliances by considering the appliances and laundry chemistry as a system, rather than individually.

  12. Effect of excess air on the optimization of heating appliances for biomass combustion

    Energy Technology Data Exchange (ETDEWEB)

    Menghini, D. [Dipartimento di Ingegneria Chimica, Universita degli studi di Napoli Federico II, Piazzale Tecchio 80, 80125 Napoli (Italy); Marra, F.S.; Allouis, C.; Beretta, F. [Consiglio Nazionale delle Ricerche, Istituto di Ricerche sulla Combustione - CNR, via Diocleziano 328, 80124 Napoli (Italy)

    2008-07-15

    The performance of a domestic appliance for wood logs combustion is a function of several variables, such as the geometric design of the appliance and its operating parameters. Among them, air feeding conditions are really decisive if the objective function is the maximization of the heat recovered from flue gases. Therefore, even if pollutant emissions have to be ever considered, the amount of excess air can be seen as a fundamental parameter in the definition of thermal efficiency of the appliance. In this paper the role of this parameter is analysed. The analysis is conducted by linking the results obtained from experimental data, detailed CFD simulations and a simplified mathematical model based on a network of CSTR. The derivation of an idealized schematization of the appliance was essential to realize the role of excess air variations, with more generality than with respect to a specific appliance configuration. Conversely, while the experimental data and CFD results were necessary to derive the simplified model, the indications given by this simplified model were useful to analyze results coming from both experiments and detailed numerical simulations. It has been evidenced the need to distinguish between the role of excess air in the chemical combustion and in the heat recovery in the appliance as well as to quantify the feedback between these two processes. (author)

  13. California Enhances Energy Efficiency

    Science.gov (United States)

    Rosenfeld, Arthur H.

    2011-11-01

    This article will discuss how my colleagues and I have promoted energy efficiency over the last 40 years. Our efforts have involved thousands of people from many different areas of expertise. The work has proceeded in several areas: • Investigating the science and engineering of energy end-use, • Assessing the potential and theoretical opportunities for energy efficiency, • Developing analytic and economic models to quantify opportunities, • Researching and developing new equipment and processes to bring these opportunities to fruition, • Participating in the development of California and later federal standards for energy performance in buildings and appliances, • Ensuring that market incentives were aligned with policies, and • Designing clear and convincing graphics to convey opportunities and results to all stakeholders.

  14. A segmented appliance for space closure followed by Invisalign and fixed appliances.

    Science.gov (United States)

    Uribe, Flavio; Cutrera, Alice; Nanda, Ravinda

    2011-01-01

    This case report describes the use of a segmented appliance for space closure prior to using Invisalign. The maxillary right canine was retracted into the extracted first premolar space with a sectional wire from the first molar to the canine with no visible brackets in the incisor region. The advantage of this technique is the ability to achieve better root and rotational control during space closure with a fixed appliance that also has limited visibility. A maxillary fixed appliance was used to refine the esthetics in the maxillary arch due to the limitations of the Invisalign appliance in achieving rotational and vertical movements.

  15. Home Appliance Load Scheduling with SEMIAH

    DEFF Research Database (Denmark)

    Jacobsen, Rune Hylsberg; Ghasem Azar, Armin; Zhang, Qi

    2015-01-01

    The European research project SEMIAH aims at designing a scalable infrastructure for residential demand response. This paper presents the progress towards a centralized load scheduling algorithm for controlling home appliances taking power grid constraints and satisfaction of consumers into account....

  16. Efficient Consistency Achievement of Federated Identity and Access Management Based on a Novel Self-Adaptable Approach

    Science.gov (United States)

    Cha, Shi-Cho; Chang, Hsiang-Meng

    Federated identity and access management (FIAM) systems enable a user to access services provided by various organizations seamlessly. In FIAM systems, service providers normally stipulate that their users show assertions issued by allied parties to use their services as well as determine user privileges based on attributes in the assertions. However, the integrity of the attributes is important under certain circumstances. In such a circumstance, all released assertions should reflect modifications made to user attributes. Despite the ability to adopt conventional certification revocation technologies, including CRL or OCSP, to revoke an assertion and request the corresponding user to obtain a new assertion, re-issuing an entirely new assertion if only one attribute, such as user location or other environmental information, is changed would be inefficient. Therefore, this work presents a self-adaptive framework to achieve consistency in federated identity and access management systems (SAFIAM). In SAFIAM, an identity provider (IdP), which authenticates users and provides user attributes, should monitor access probabilities according to user attributes. The IdP can then adopt the most efficient means of ensuring data integrity of attributes based on related access probabilities. While Internet-based services emerge daily that have various access probabilities with respect to their user attributes, the proposed self-adaptive framework significantly contributes to efforts to streamline the use of FIAM systems.

  17. Guiding occlusal development with functional appliances.

    Science.gov (United States)

    Nielsen, I L

    1996-10-01

    Functional appliances have been used in orthodontics since their introduction by Pierre Robin almost one hundred years ago, however, our understanding of how they bring about orthodontic correction is still limited. This article is a brief overview of their history, mode of action, advantages and disadvantages, and includes the results of a study of attempts to control and minimise their side-effects using a recent development in functional appliances: the 'Teuscher Appliance'. This appliance combines a high-pull headgear with the activator, and is designed to reduce the often reported side-effects of functional appliances. The skeletal and dentoalveolar effects of treatment with the Teuscher Appliance on 40 consecutively-treated patients are reported and illustrated with four individual case reports. The results showed that the skeletal effect on the maxilla was a retardation of the normal forward and downward growth in 80 per cent of the cases, and that mandibular growth in 70 per cent of cases was forward. In patients whose mandibular growth was primarily in a vertical direction, such growth could be ascribed mainly to posterior rotation of the maxilla and/or the fact that the acrylic covering the lower posterior teeth to correct a deep bite was removed, promoting the eruption of these teeth and increasing the anterior vertical development. The dentoalveolar changes were characterised by retroclination of the maxillary incisors in 90 per cent of the patients, and were due to insufficient torque control by the built-in torque springs, which need further development. The mandibular incisors were well controlled by capping. The statistical analysis showed an inverse correlation between the initial incisor inclination and the change during treatment. This suggests that proclination of the lower incisors, as previously reported, is not a contra-indication to functional appliance treatment, provided the appliance is correctly designed. Overall, this study showed

  18. Standby consumption of household appliances; Standby-Verbrauch von Haushaltgeraeten

    Energy Technology Data Exchange (ETDEWEB)

    Nipkow, J.; Bush, E.

    2003-07-01

    While electricity consumption of household appliances is well documented for conventional operation cycles, there are still many gaps in our knowledge regarding consumption in the standby status. The aim of this project was to obtain new findings by carrying out market surveys, measurements and evaluations. The total standby losses for household appliances in Switzerland amount to approximately 400 GWh, and the associated electricity costs are about 80 million Swiss francs. The greatest fraction - approximately 80 percent - is traceable to heating requirements for coffee machines. In some appliance categories the share of standby losses compared to overall electricity consumption is extremely high. This figure for coffee machines in offices is 84 percent, for coffee machines in private households it is 60 percent, and for induction cooker tops it is 48 percent. The main technical requirements for enhancing the energy efficiency of coffee machines are an automatic switch-off function and improved insulation of boilers. According to the latest manufacturers' specifications of induction cooker tops, it is apparently possible to significantly reduce the surprisingly high losses associated with control devices. Generally speaking, the efficiency of power supply units could still be improved. It is now possible to reduce consumption levels from the previously standard level of about 4 W to less than 0.5 W. Since it appears that relatively simple measures may significantly increase the efficiency, it is recommended that action be taken. Here, it is essential to work out detailed guidelines and define testing standards for declaring standby losses. The proposal put forward here for an energy declaration for coffee machines is intended to help test centres, EU authorities and manufacturers to carry out uniform measurements and evaluations. Given the high power consumption of coffee machines, their significant efficiency enhancement potential and the availability of

  19. Exposure from Appliances (invited paper)

    Energy Technology Data Exchange (ETDEWEB)

    Cartwright, R.A

    1999-07-01

    The dosemeter studies on exposures to ELF electromagnetic irradiation from domestic equipment all suggest the whole-body doses are low, whilst some exposure to extremities could be high but of brief duration. Old style electric overblankets, however, are an exception and produce high fields and relatively high whole-body doses if switched on during the night. Relatively few epidemiological studies have addressed these issues. All of the studies have associated problems of interpretations. Two isolated studies throw up on association with the frequency of spontaneous abortion and electric blanket use whilst another links adult AML and electric shaver usage. Both results could be fortuitous. More consistency appears from three studies of childhood leukaemia. Here statistically significant associations between electric blanket use in pregnancies appear in two separate studies, as does hair dryer use in the case of children: other appliances use associations have been reported. These results are critically assessed. The United Kingdom Childhood Cancer Study (UKCCS) addresses some of these issues as part of a wider ranging assessment of EMF at home and at school. External sources are incorporated with the measurement of domestic ambient conditions in an attempt to make an overall assessment of total exposure. (author)

  20. Mountain Plains Learning Experience Guide: Appliance Repair. Course: Heater-Type Appliances.

    Science.gov (United States)

    Ziller, T.

    One of two individualized courses included in an appliance repair curriculum (see CE 027 767), this course covers minor and major heater-type appliances. The course is comprised of six units: (1) Irons, (2) Roasters, (3) Space Heaters, (4) Water Heaters, (5) Electric Ranges, and (6) Gas Ranges. Each unit begins with a Unit Learning Experience…

  1. Cephalometric effects of the Jones Jig appliance followed by fixed appliances in Class II malocclusion treatment

    Science.gov (United States)

    Patel, Mayara Paim; Henriques, José Fernando Castanha; de Freitas, Karina Maria Salvatore; Grec, Roberto Henrique da Costa

    2014-01-01

    Objective The aim of this study was to cephalometrically assess the skeletal and dentoalveolar effects of Class II malocclusion treatment performed with the Jones Jig appliance followed by fixed appliances. Methods The sample comprised 25 patients with Class II malocclusion treated with the Jones Jig appliance followed by fixed appliances, at a mean initial age of 12.90 years old. The mean time of the entire orthodontic treatment was 3.89 years. The distalization phase lasted for 0.85 years, after which the fixed appliance was used for 3.04 years. Cephalograms were used at initial (T1), post-distalization (T2) and final phases of treatment (T3). For intragroup comparison of the three phases evaluated, dependent ANOVA and Tukey tests were used. Results Jones Jig appliance did not interfere in the maxillary and mandibular component and did not change maxillomandibular relationship. Jones Jig appliance promoted distalization of first molars with anchorage loss, mesialization and significant extrusion of first and second premolars, as well as a significant increase in anterior face height at the end of treatment. The majority of adverse effects that occur during intraoral distalization are subsequently corrected during corrective mechanics. Buccal inclination and protrusion of mandibular incisors were identified. By the end of treatment, correction of overjet and overbite was observed. Conclusions Jones Jig appliance promoted distalization of first molars with anchorage loss represented by significant mesial movement and extrusion of first and second premolars, in addition to a significant increase in anterior face height. PMID:25162565

  2. Cephalometric effects of the Jones Jig appliance followed by fixed appliances in Class II malocclusion treatment.

    Science.gov (United States)

    Patel, Mayara Paim; Henriques, José Fernando Castanha; Freitas, Karina Maria Salvatore; Grec, Roberto Henrique da Costa

    2014-01-01

    The aim of this study was to cephalometrically assess the skeletal and dentoalveolar effects of Class II malocclusion treatment performed with the Jones Jig appliance followed by fixed appliances. The sample comprised 25 patients with Class II malocclusion treated with the Jones Jig appliance followed by fixed appliances, at a mean initial age of 12.90 years old. The mean time of the entire orthodontic treatment was 3.89 years. The distalization phase lasted for 0.85 years, after which the fixed appliance was used for 3.04 years. Cephalograms were used at initial (T1), post-distalization (T2) and final phases of treatment (T3). For intragroup comparison of the three phases evaluated, dependent ANOVA and Tukey tests were used. Jones Jig appliance did not interfere in the maxillary and mandibular component and did not change maxillomandibular relationship. Jones Jig appliance promoted distalization of first molars with anchorage loss, mesialization and significant extrusion of first and second premolars, as well as a significant increase in anterior face height at the end of treatment. The majority of adverse effects that occur during intraoral distalization are subsequently corrected during corrective mechanics. Buccal inclination and protrusion of mandibular incisors were identified. By the end of treatment, correction of overjet and overbite was observed. Jones Jig appliance promoted distalization of first molars with anchorage loss represented by significant mesial movement and extrusion of first and second premolars, in addition to a significant increase in anterior face height.

  3. Supporting synergism: Enhancing Federal, State and private sector collaboration in renewable energy and energy efficiency. Second annual report of the State Energy Advisory Board, December 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    The State Energy Advisory Board first convened to counsel the Secretary of Energy and the Congress on the initiation, design, implementation, and evaluation of Federal energy efficiency and renewable energy (EE/RE) programs. The Board has developed and delivered a host of recommendations which serve to integrate and foster consistency among Federal, State, local and private sector activities. In fiscal year (FY) 1993, the Board worked closely with Department leadership to provide guidance on the implementation of several National Energy Policy Act (EPACT) provisions pertaining to the enhancement of energy efficiency and renewable energy initiatives, as well as on redefining the mission of the National Laboratories. Through these and other actions -- which also include promoting EE/RE technology deployment efforts -- the Board ensures that the knowledge and experience of program stakeholders, especially State and local governments, community action agencies and also the off-shore territories, are incorporated into Federal activities pertaining to energy efficiency and renewable energy.

  4. Pellet fired appliances. Market survey. 7. rev. ed.; Pelletheizungen. Marktuebersicht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-01-15

    The market survey under consideration reports on pellet central heating systems and pellet fired appliances. The main chapters of this market survey are concerned to: (1) Information on wood pellets and pellet fired appliances; (2) Information about the interpretation of the market survey; (3) Survey of all compared pellet fired appliances with respect to the nominal power; (4) Price lists of pellet fired appliances and pellet central heating systems; (5) Type sheets of the compared pellet fired appliances and pellet central heating systems. Finally, this brochure contains the addresses of the produces and distribution partners of pellet fired appliances and pellet central heating systems.

  5. The UK-DALE dataset, domestic appliance-level electricity demand and whole-house demand from five UK homes.

    Science.gov (United States)

    Kelly, Jack; Knottenbelt, William

    2015-01-01

    Many countries are rolling out smart electricity meters. These measure a home's total power demand. However, research into consumer behaviour suggests that consumers are best able to improve their energy efficiency when provided with itemised, appliance-by-appliance consumption information. Energy disaggregation is a computational technique for estimating appliance-by-appliance energy consumption from a whole-house meter signal. To conduct research on disaggregation algorithms, researchers require data describing not just the aggregate demand per building but also the 'ground truth' demand of individual appliances. In this context, we present UK-DALE: an open-access dataset from the UK recording Domestic Appliance-Level Electricity at a sample rate of 16 kHz for the whole-house and at 1/6 Hz for individual appliances. This is the first open access UK dataset at this temporal resolution. We recorded from five houses, one of which was recorded for 655 days, the longest duration we are aware of for any energy dataset at this sample rate. We also describe the low-cost, open-source, wireless system we built for collecting our dataset.

  6. Ubiquitous Monitoring of Electrical Household Appliances

    Science.gov (United States)

    Lloret, Jaime; Macías, Elsa; Suárez, Alvaro; Lacuesta, Raquel

    2012-01-01

    The number of appliances at home is increasing continuously, mainly because they make our lives easier. Currently, technology is integrated in all objects of our daily life. TCP/IP let us monitor our home in real time and check ubiquitously if something is happening at home. Bearing in mind this idea, we have developed a low-cost system, which can be used in any type of electrical household appliance that takes information from the appliance and posts the information to the Twitter Social network. Several sensors placed in the household appliances gather the sensed data and send them wired or wirelessly, depending on the case, using small and cheap devices to a gateway located in the home. This gateway takes decisions, based on the received data, and sends notifications to Twitter. We have developed a software application that takes the values and decides when to issue an alarm to the registered users (Twitter friends of our smart home). The performance of our system has been measured taking into account the home network (using IEEE 802.3u and IEEE 802.11g) and the data publishing in Twitter. As a result, we have generated an original product and service for any electrical household appliance, regardless of the model and manufacturer, that helps home users improve their quality of life. The paper also shows that there is no system with the same innovative features like the ones presented in this paper. PMID:23202205

  7. [Oral appliances in the treatment of snoring].

    Science.gov (United States)

    Piorunek, Tomasz; Lewandowski, Leszek; Młynarczyk, Witold; Banaszewski, Jacek; Nowicka, Agata; Kanikowski, Marek

    2004-01-01

    There are many methods of snoring treatment from conservative and prosthetic to surgical. The snoring sound is produced by vibration of the soft tissues of the pharynx, soft palate and also uvula. Snoring occurs in 50% of the adult male population and it can be isolated or sign of the obstructive sleep apnoea syndrome. Oral appliances modify the position of the mandibule, the tongue and other structures in oral cavity. Oral appliances are recommended for the treatment of snoring and mild obstructive sleep apnoea syndrome. That is why we constructed the study to assess wheather oral appliances correct snoring. 12 mails (aged 43-57) with intensive snoring for at least 50% of the sleep time were qualified to the treatment with oral appliances. The decision about the type of the device were made by ENT surgeon and maxillo-facial surgeon. The various oral appliances were used; some of which were modyfied by us. During the treatment snoring was tested with Poly-Mesam device. The best results were obtained with the use of devices that correct the position of soft palate and uvula. All the devices decreased snoring significantly. They were tolerated by the majority of patients.

  8. Dental rehabilitation of a child with early childhood caries using Groper's appliance

    Science.gov (United States)

    Joybell, C. Chrishantha; Ramesh, K.; Simon, Paul; Mohan, Jayashree; Ramesh, Maya

    2015-01-01

    The mainstay of pediatric dental practice is the successful esthetic rehabilitation of a preschooler with advanced carious lesions. Loss of masticatory efficiency, compromised esthesis, mispronunciation of labiodentals sounds, and development of abnormal oral habits are compromises arising due to the loss of primary anterior teeth at an early age either due to trauma or due to caries. Parental desire is the most decisive factor for the placement of an anterior esthetic appliance. This unique case report highlights the fabrication of simple, Groper's appliance in a 5-year-old child with early childhood caries. PMID:26538948

  9. Energy-conservation opportunities in appliances using energy storage. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, W.T.; Demetri, E.P.; Lee, W.D.

    1978-11-30

    During this program, the use of energy storage in conventional appliances to save energy was evaluated. Fuel-fired appliances, electric appliances, and utility load leveling by energy storage on the customer's side of the meter were considered. For each of the appliances treated, various energy-storage techniques were evaluated by estimating the energy savings and the cost of the required storage system. An estimate of the commercial feasibility of each system was made based on the years necessary to pay back the cost of the storage system. In addition, when alternate approaches could be used to improve the efficiency of the appliance without energy storage, the costs of these methods were considered in the evaluation. The analyses found that the most-promising applications involved the use of point-of-use thermal energy storage for electric-utility load-leveling. However, although substantial utility operating cost savings can be achieved, there may be little or no actual energy saving when all losses are considered. For applications other than load-leveling, energy savings were too small to pay back the added cost of the storage system in an acceptable time.

  10. Feasibility of an appliance energy testing and labeling program for Sri Lanka

    Energy Technology Data Exchange (ETDEWEB)

    Biermayer, Peter; Busch, John; Hakim, Sajid; Turiel, Issac; du Pont, Peter; Stone, Chris

    2000-04-01

    A feasibility study evaluated the costs and benefits of establishing a program for testing, labeling and setting minimum efficiency standards for appliances and lighting in Sri Lanka. The feasibility study included: refrigerators, air-conditioners, flourescent lighting (ballasts & CFls), ceiling fans, motors, and televisions.

  11. Feasibility of an appliance energy testing and labeling program for Sri Lanka

    OpenAIRE

    Biermayer, Peter; Busch, John; Hakim, Sajid; Turiel, Issac; du Pont, Peter; Stone, Chris

    2000-01-01

    A feasibility study evaluated the costs and benefits of establishing a program for testing, labeling and setting minimum efficiency standards for appliances and lighting in Sri Lanka. The feasibility study included: refrigerators, air-conditioners, flourescent lighting (ballasts & CFls), ceiling fans, motors, and televisions.

  12. 46 CFR 109.209 - Appliances for watertight integrity.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Appliances for watertight integrity. 109.209 Section 109... OPERATIONS Tests, Drills, and Inspections § 109.209 Appliances for watertight integrity. (a) Before getting underway, the master or person in charge shall insure that each appliance for watertight integrity is...

  13. Load Characterization for small domestic appliances and electronics

    NARCIS (Netherlands)

    Van der Sluis, P.

    2009-01-01

    In this report, the energy consumption of small domestic loads has been analysed. To make the around 100 types of appliances considereda bit manageable, the appliances were categorized into several groups. The possibilities for time-shifting of the energy use of these small appliances was investigat

  14. 46 CFR 78.17-5 - Valves and closing appliances.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Valves and closing appliances. 78.17-5 Section 78.17-5..., Drills, and Inspections § 78.17-5 Valves and closing appliances. (a) It shall be the duty of the master to see that all valves, including cross connecting valves where fitted, and other appliances such...

  15. Market and behavioral barriers to energy efficiency: A preliminary evaluation of the case for tariff financing in California

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, K. Sydny

    2011-06-23

    Consumers regularly forgo purchases of high efficiency appliances that appear to be cost effective at a reasonable rate of return. While some argue that this is a true revelation of preferences for appliance features, this 'efficiency gap' can be largely explained by a combination of market and behavioral failures that reduce consumers ability to evaluate the relative value of appliances and skew preferences toward initial cost savings, undervaluing future reductions in operating costs. These failures and barriers include externalities of energy use, imperfect competition between manufacturers, asymmetric information, bounded rationality, split incentives, and transaction costs (Golove 1996). Recognizing the social benefit of energy conservation, several major methods are used by policymakers to ensure that efficient appliances are purchased: minimum efficiency standards, Energy Star labeling, and rebates and tax credits. There is no single market for energy services; there are hundreds of uses, thousands of intermediaries, and millions of users, and likewise, no single appropriate government intervention (Golove 1996). Complementary approaches must be implemented, considering policy and institutional limitations. In this paper, I first lay out the rationale for government intervention by addressing the market and behavioral failures and barriers that arise in the context of residential energy efficiency. I then consider the ways in which some of these failures and barriers are addressed through major federal programs and state and utility level programs that leverage them, as well as identifying barriers that are not addressed by currently implemented programs. Heterogeneity of consumers, lack of financing options, and split incentives of landlords and tenants contribute significantly to the under-adoption of efficient appliances. To quantify the size of the market most affected by these barriers, I estimate the number of appliances, and in particular

  16. Use of Residential Smart Appliances for Peak-Load Shifting and Spinning Reserves Cost/Benefit Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, Chellury; Pratt, Robert G.; Srivastava, Viraj; Li, Shun

    2010-12-01

    In this report, we present the results of an analytical cost/benefit study of residential smart appliances from a utility/grid perspective in support of a joint stakeholder petition to the ENERGY STAR program within the Environmental Protection Agency (EPA) and Department of Energy (DOE). The goal of the petition is in part to provide appliance manufacturers incentives to hasten the production of smart appliances. The underlying hypothesis is that smart appliances can play a critical role in addressing some of the societal challenges, such as anthropogenic global warming, associated with increased electricity demand, and facilitate increased penetration of renewable sources of power. The appliances we consider include refrigerator/freezers, clothes washers, clothes dryers, room air-conditioners, and dishwashers. The petition requests the recognition that providing an appliance with smart grid capability, i.e., products that meet the definition of a smart appliance, is at least equivalent to a corresponding five percent in operational machine efficiencies. It is then expected that given sufficient incentives and value propositions, and suitable automation capabilities built into smart appliances, residential consumers will be adopting these smart appliances and will be willing participants in addressing the aforementioned societal challenges by more effectively managing their home electricity consumption. The analytical model we utilize in our cost/benefit analysis consists of a set of user-definable assumptions such as the definition of on-peak (hours of day, days of week, months of year), the expected percentage of normal consumer electricity consumption (also referred to as appliance loads) that can shifted from peak hours to off-peak hours, the average power rating of each appliance, etc. Based on these assumptions, we then formulate what the wholesale grid operating-cost savings, or benefits, would be if the smart capabilities of appliances were invoked, and

  17. The national strategic plan for federal aquaculture research, specific goal #4: Improve production efficiency and well-being

    Science.gov (United States)

    The 2014-2019 National Strategic Plan for Federal Aquaculture Research identifies a series of specific goals that identify research priorities for Federal agency and interagency research programs. Collectively, these priorities define research activities with the broad outcome of supporting aquacul...

  18. 76 FR 23714 - Railroad Safety Appliance Standards

    Science.gov (United States)

    2011-04-28

    ... rail equipment designs to FRA for approval with respect to the placement and securement of safety... spurred efforts to increase workplace safety in at least two areas related to appliances on railroad cars... that the only instance where FRA has required service upon labor unions is with respect to the...

  19. Mandibular advancement appliance for obstructive sleep apnoea

    DEFF Research Database (Denmark)

    Petri, Niels; Svanholt, Palle; Solow, Beni

    2008-01-01

    The aim of this trial was to evaluate the efficacy of a mandibular advancement appliance (MAA) for obstructive sleep apnoea (OSA). Ninety-three patients with OSA and a mean apnoea-hypopnoea index (AHI) of 34.7 were centrally randomised into three, parallel groups: (a) MAA; (b) mandibular non...

  20. Modeling of GE Appliances: Final Presentation

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Vyakaranam, Bharat; Leistritz, Sean M.; Parker, Graham B.

    2013-01-31

    This report is the final in a series of three reports funded by U.S. Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) in collaboration with GE Appliances’ through a Cooperative Research and Development Agreement (CRADA) to describe the potential of GE Appliances’ DR-enabled appliances to provide benefits to the utility grid.

  1. Clinical evolution of the Invisalign appliance.

    Science.gov (United States)

    Vlaskalic, Vicki; Boyd, Robert L

    2002-10-01

    The Invisalign System of tooth movement has been available to orthodontists since 1999 and has now become available to the entire dental profession. This paper explores the role of this system within the dental armamentarium and describes the clinical evolution of the appliance, based on a feasibility study initiated at the University of the Pacific in 1997.

  2. Cephalometric effects of the Jones Jig appliance followed by fixed appliances in Class II malocclusion treatment

    Directory of Open Access Journals (Sweden)

    Mayara Paim Patel

    2014-06-01

    Full Text Available OBJECTIVE: The aim of this study was to cephalometrically assess the skeletal and dentoalveolar effects of Class II malocclusion treatment performed with the Jones Jig appliance followed by fixed appliances. METHODS: The sample comprised 25 patients with Class II malocclusion treated with the Jones Jig appliance followed by fixed appliances, at a mean initial age of 12.90 years old. The mean time of the entire orthodontic treatment was 3.89 years. The distalization phase lasted for 0.85 years, after which the fixed appliance was used for 3.04 years. Cephalograms were used at initial (T1, post-distalization (T2 and final phases of treatment (T3. For intragroup comparison of the three phases evaluated, dependent ANOVA and Tukey tests were used. RESULTS: Jones Jig appliance did not interfere in the maxillary and mandibular component and did not change maxillomandibular relationship. Jones Jig appliance promoted distalization of first molars with anchorage loss, mesialization and significant extrusion of first and second premolars, as well as a significant increase in anterior face height at the end of treatment. The majority of adverse effects that occur during intraoral distalization are subsequently corrected during corrective mechanics. Buccal inclination and protrusion of mandibular incisors were identified. By the end of treatment, correction of overjet and overbite was observed. CONCLUSIONS: Jones Jig appliance promoted distalization of first molars with anchorage loss represented by significant mesial movement and extrusion of first and second premolars, in addition to a significant increase in anterior face height.

  3. Mobile based Appliances switching using Bluetooth

    Science.gov (United States)

    Gupta, Sureshchandra J., Dr; Desai, Kalp; Gaikawad, Deepak; Pawar, Vijay N.; Gangal, Devendranath R.

    2008-04-01

    How many times do you have to get up from your desk to switch on your Air conditioner or fan when you are completely into your table work? How many times do you feel lazy to get off your comfort to switch on/off your home appliances in different rooms? How much energy do you lose in a day for operating your appliances? The solution is either a large amount of manual work—or the idea that is presented over here: APP-CON (APP-CON stands for appliances control). Here the ordinary cell phone with bluetooth capability acts as remote designed in such a manner that it acts as a helping hand to human by reducing its manual work and therefore saving human energy. The cell phone control of APP-CON units lets you access many of your home appliances situated in different rooms by using just a single remote from distance. Electronics hobbyists would love to make such a remote control themselves. But they find it difficult due to complex circuitry rather than the high cost because of using a number of frequency counting techniques and decade counters. The APP-CON system given here overcomes the aforesaid problems by using a single microcontroller and moreover a simple program or software for bluetooth enabled cell phone and employing simple coding and decoding of remote signals. Here the mobile based remote control is used to operate a number of home appliances basically consists of Bluetooth technology. The unit consists of a transmitter and a receiver consisting of a microcontroller. The importance of bluetooth technology is that the signal to be transmitted from transmitter to the receiver is done without requiring line of sight.

  4. The FTB (Flores Twin Block): a new fixed functional appliance.

    Science.gov (United States)

    Rodriguez Flores, José Maria

    2010-01-01

    Functional Orthopaedics, Functionalism and their appliances have as their objective to correct the skeletal dysplasia that underlies many malocclusions, taking advantage of the potential of the stomatognathic system's strength. The range of functional appliances is very extensive and there is a great variety thereof. Basically, functional appliances can be: removable functional appliances and fixed functional appliances. In this article, we are going to present a new design for fixed functional appliances for the treatment of Class II, basing ourselves on the biomechanical principles of the Twin Block. We believe this new design, compared with other fixed functional appliances currently in use, improves patient comfort, providing a more effective response and helps us to treat our Class II cases with total success.

  5. Orthodontics in 3 millennia. Chapter 9: functional appliances to midcentury.

    Science.gov (United States)

    Wahl, Norman

    2006-06-01

    The history of the functional appliance can be traced back to 1879, when Norman Kingsley introduced the "bite-jumping" appliance. In the early 1900s, parallel development began in the United States and Europe in fixed and functional techniques, respectively, but the Atlantic Ocean was a geographic barrier that restricted the sharing of knowledge and experience in these philosophies. The only exception to this was the fixed functional appliance designed by Herbst. The monobloc, developed by Robin in 1902, is generally considered the forerunner of removable functional appliances, but the activator developed in Norway by Andresen in the 1920s was the first functional appliance to be widely accepted, becoming the basis of the "Norwegian system" of treatment. Both the appliance system and its theoretical underpinnings were improved and extended elsewhere in Europe, particularly by the German school led by Häupl, Bimler, and Balters. It would be after midcentury before functional appliances were reintroduced into American orthodontics.

  6. GE Appliance Park Louisville, KY Plant Wide Assessment Final Report October 25th, 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chandon Rao; Richard Urschel

    2007-10-25

    Used a team of experts to analyze and model major systems at a large industrial appliance manufacturer. During the data gathering stage, the team specifically looked for baselining the efficiency of the systems as well as developing short term and longer term efficiency projects. Electrical distribution, Compressed air generation and thermal heat recovery for the production facility and front office heating and cooling optimization were all baselined during the study.

  7. Policy instruments force climate protection by increasing the energy efficiency of electric appliances and electrical systems in private households and the commercial and small-scale sector; Politikinstrumente zur Effizienzsteigerung von Elektrogeraeten und -anlagen in Privathaushalten, Bueros und im Kleinverbrauch

    Energy Technology Data Exchange (ETDEWEB)

    Duscha, Markus; Seebach, Dominik; Griessmann, Benjamin [ifeu-Institut fuer Energie- und Umweltforschung GmbH, Heidelberg (Germany)

    2006-06-15

    The implementation of new, more market-oriented instruments represents an additional starting point for future developments. This path was started on in the EU in 2005 with the CO{sub 2} emission trade. The price signals that could be expected for end customers in households and trade from this alone would most likely be too low to be a sufficient motivation for exhausting the electricity efficiency potential. At this point, we must again point out that only rarely are there economic hindrances to the complete use of potential, but rather a lack of information and organization leads to increased transaction costs in the implementation. This must be corrected by accompanying efficiency instruments and programs. However, implementing these programs does not (yet) represent an economic alternative to the efficiency measures in their own systems for the industry and power company involved in the emission trade due to such transaction costs. Otherwise there would be initiatives in the meantime for this type of privately organized program, as these have been suggested in this report as tasks for a national electricity fund. Therefore, the instrument of the EU emission trade must be supplemented in the foreseeable future with the instruments presented here. There is not much evidence as to how much a comparable implementation of tradable energy efficiency certificates (often referred to as ''white certificates'') is a suitable start for concluding efficiency potential at the level of the very inhomogeneous group of end consumers. We still see a need for research before such an instrument can be recommended as a guide for Germany or even Europe. The questions still to be clarified include, among other things, the ability of standardizing the assignment rules as well as the amount of the transaction costs to be expected, even in dependency on the market level at which the trade is started (end consumer, energy service provider, electronic equipment

  8. Commercial Discount Rate Estimation for Efficiency Standards Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, K. Sydny [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-04-13

    Underlying each of the Department of Energy's (DOE's) federal appliance and equipment standards are a set of complex analyses of the projected costs and benefits of regulation. Any new or amended standard must be designed to achieve significant additional energy conservation, provided that it is technologically feasible and economically justified (42 U.S.C. 6295(o)(2)(A)). A proposed standard is considered economically justified when its benefits exceed its burdens, as represented by the projected net present value of costs and benefits. DOE performs multiple analyses to evaluate the balance of costs and benefits of commercial appliance and equipment e efficiency standards, at the national and individual building or business level, each framed to capture different nuances of the complex impact of standards on the commercial end user population. The Life-Cycle Cost (LCC) analysis models the combined impact of appliance first cost and operating cost changes on a representative commercial building sample in order to identify the fraction of customers achieving LCC savings or incurring net cost at the considered efficiency levels.1 Thus, the choice of commercial discount rate value(s) used to calculate the present value of energy cost savings within the Life-Cycle Cost model implicitly plays a key role in estimating the economic impact of potential standard levels.2 This report is intended to provide a more in-depth discussion of the commercial discount rate estimation process than can be readily included in standard rulemaking Technical Support Documents (TSDs).

  9. Global Challenges in the Domestic Appliances Industry

    OpenAIRE

    Dusan Gosnik

    2009-01-01

    The domestic appliances industry is a mature industry. Changes in the business environment such as political, law, cultural, social, ecological and technological influences have an effect on the future development of this industry. Challenges to producers in this industry are oriented towards the further globalisation of the business, managing processes, new product and innovations development, and towards establishing and empowerment of the product brands. Global trends in the use of some na...

  10. Catalytic combustion in small wood burning appliances

    Energy Technology Data Exchange (ETDEWEB)

    Oravainen, H. [VTT Energy, Jyvaeskylae (Finland)

    1996-12-31

    There is over a million hand fired small heating appliances in Finland where about 5,4 million cubic meters of wood fuel is used. Combustion in such heating appliances is a batch-type process. In early stages of combustion when volatiles are burned, the formation of carbon monoxide (CO) and other combustible gases are difficult to avoid when using fuels that have high volatile matter content. Harmful emissions are formed mostly after each fuel adding but also during char burnout period. When the CO-content in flue gases is, say over 0.5 %, also other harmful emissions will be formed. Methane (CH{sub 4}) and other hydrocarbons are released and the amount of polycyclic aromatic hydrocarbons (PAH)-compounds can be remarkable. Some PAH-compounds are very carcinogenic. It has been estimated that in Finland even more than 90 % of hydrocarbon and PAH emissions are due to small scale wood combustion. Emissions from transportation is excluded from these figures. That is why wood combustion has a net effect on greenhouse gas phenomena. For example carbon monoxide emissions from small scale wood combustion are two fold compared to that of energy production in power plants. Methane emission is of the same order as emission from transportation and seven fold compared with those of energy production. Emissions from small heating appliances can be reduced by developing the combustion techniques, but also by using other means, for example catalytic converters. In certain stages of the batch combustion, temperature is not high enough, gas mixing is not good enough and residence time is too short for complete combustion. When placed to a suitable place inside a heating appliance, a catalytic converter can oxidize unburned gases in the flue gas into compounds that are not harmful to the environment. (3 refs.)

  11. A report to Congress on a role for federal purchasing in commercializing new energy-efficient and renewable-energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-16

    The purpose of this study is to satisfy the requirements of Section 152 of the Energy Policy Act of 1992 (EPAct 92), which directs the Secretary of Energy to ``evaluate the potential use of the purchasing power of the Federal government to promote the development and commercialization of energy efficient products`` (US Congress 1992). Here, purchasing power implies a market presence by the Federal government that is large enough to influence decisions by manufacturers and suppliers about new-product introduction. In recent years, as energy use has become more efficient in the United States in both the public and private sectors, a major contributor to this transition has been the development of innovative technologies and products that reduce the use of energy and/or that use renewable forms of energy. Although the Nation`s efforts toward greater efficiency have been impressive, there are still many opportunities for the widespread introduction of even more energy-saving innovations. This report outlines the actions that DOE can take, in partnership with other Federal agencies, to address the barriers and realize the opportunities from commercializing new technologies.

  12. Electrical Appliances and other Equipment

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    2006-01-01

    After some reflection on the efficiency concept, the paper first outlines how the most important electrical end-use technologies, used in households as well as in many service institutions, can be designed to consume much less energy than they do today. This is based on techno-physical analyses...... combined with some consideration on the future human need for the energy service output from the technologies. On the above basis is suggested one set of energy services, which a family in a cold climate can enjoy from just annually consuming 250 kWh of electricity per person. This is actually sufficient......-use technologies, are here suggested progressive electricity taxes, followed by critical reflections on the use of energy suppliers to promote selling less energy. Finally are suggested how research can be most effective and useful by being more interdisciplinary and less dependent on business interests...

  13. System for Award Management (SAM) -- Creating Efficiencies in Federal Government Contracting through the Use of Streamlining and Integration

    Science.gov (United States)

    2011-09-01

    beginning of the mandated use of e- commerce in federal business ( Graw & Wyatt III, 2002). Based on FASA, DoD formed the Joint Electronic Commerce...Contract Management, 34–41. Graw , L. H., & Wyatt III, J. B. (2002, September). Getting on the e-procurement bandwagon. Contract Management, 40–43

  14. Classification of Household Appliance Operation Cycles: A Case-Study Approach

    Directory of Open Access Journals (Sweden)

    Zeyu Wang

    2015-09-01

    Full Text Available In recent years, a new generation of power grid system, referred to as the Smart Grid, with an aim of managing electricity demand in a sustainable, reliable, and economical manner has emerged. With greater knowledge of operational characteristics of individual appliances, necessary automation control strategies can be developed in the Smart Grid to operate appliances in an efficient manner. This paper provides a way of classifying different operational cycles of a household appliance by introducing an unsupervised learning algorithm called k-means clustering. An intrinsic method known as silhouette coefficient was used to measure the classification quality. An identification process is also discussed in this paper to help users identify the operation mode each types of operation cycle stands for. A case study using a typical household refrigerator is presented to validate the proposed method. Results show that the proposed the classification and identification method can partition and identify different operation cycles adequately. Classification of operation cycles for such appliances is beneficial for Smart Grid as it provides a clear and convincing understanding of the operation modes for effective power management.

  15. Measure Guideline: Combustion Safety for Natural Draft Appliances Through Appliance Zone Isolation

    Energy Technology Data Exchange (ETDEWEB)

    Fitzgerald, J. [Center for Energy and Environment, Minneapolis, MN (United States); Bohac, D. [Center for Energy and Environment, Minneapolis, MN (United States)

    2014-04-01

    This measure guideline covers how to assess and carry out the isolation of natural draft combustion appliances from the conditioned space of low-rise residential buildings. It deals with combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage. This subset of houses does not require comprehensive combustion safety tests and simplified prescriptive procedures can be used to address safety concerns. This allows residential energy retrofit contractors inexperienced in advanced combustion safety testing to effectively address combustion safety issues and allow energy retrofits including tightening and changes to distribution and ventilation systems to proceed.

  16. Optimal residential smart appliances scheduling considering distribution network constraints

    National Research Council Canada - National Science Library

    Kim, Yu-Ree; Kim, Min-Jeong; Park, Yong-Gi; Roh, Jae-Hyung; Park, Jong-Bae; Son, Sung-Yong

    2016-01-01

    As smart appliances (SAs) are more widely adopted within distribution networks, residential consumers can contribute to electricity market operations with demand response resources and reduce their electricity bill...

  17. Development and certification of the innovative pioneer oil burner for residential heating appliances

    Energy Technology Data Exchange (ETDEWEB)

    Kamath, B. [Heat Wise Inc., Ridge, NY (United States)

    1997-09-01

    The Pioneer burner represents another important milestone for the oil heat industry. It is the first practical burner design that is designated for use in small capacity heating appliances matching the needs of modern energy efficient home designs. Firing in the range of 0.3 GPH to 0.65 GPH (40,000-90,000 Btu/hr) it allows for new oil heating appliance designs to compete with the other major fuel choices in the small design load residential market. This market includes energy efficient single family houses, town-houses, condominiums, modular units, and mobile homes. The firing range also is wide enough to cover a large percentage of more conventional heating equipment and home designs as well. Having recently passed Underwriters Laboratory certification tests the burner in now being field tested in several homes and samples are being made available to interested boiler and furnace manufacturers for product development and application testing.

  18. Effects of mandibular protraction appliance associated to fixed appliance in adults

    Directory of Open Access Journals (Sweden)

    Bruno D'Aurea Furquim

    2013-10-01

    Full Text Available OBJECTIVE: This retrospective study aimed to conduct a cephalometric evaluation of the skeletal, dental and soft tissue effects resulting from treatment of adult patients presenting Class II malocclusion, performed with a Mandibular Protraction Appliance (MPA combined with a fixed orthodontic appliance. METHODS: The sample consisted of teleradiographs obtained before and after treatment of 9 adult patients (initial mean age of 22.48 years with bilateral Class II, division 1, malocclusion. Paired t test (p < 0.05 was applied to compare initial and final values. RESULTS: t test revealed an increase in anteroinferior facial height and posterior facial height. The dental changes include: extrusion of upper incisors, buccal inclination, protrusion of lower incisors, mesialization and extrusion of mandibular molars. Regarding the soft tissue component, there was an increase in nasolabial angle in addition to upper lip retrusion. CONCLUSIONS: The effects of treating Class II malocclusion adult patients, by means of using Mandibular Protraction Appliance (MPA combined with a fixed appliance were mostly observed in the mandibular arch, and consisted of buccal inclination, protrusion and intrusion of incisors, and mesialization and extrusion of the molars.

  19. [Fixed appliances current state of the art].

    Science.gov (United States)

    Droschl, H; Eskici, A; Bantleon, H P; Muchitsch, A P

    1989-11-01

    Recent advances in fixed appliances are reviewed and discussed. These include cosmetically more appealing brackets (ceramic, lingual); new wires (nickel-titanium and titanium-molybdenum alloys); new biomechanical approaches (accurate computation of forces and torques according to Burstone resulting in the use of new mechanical concepts); experiences in the treatment of transplanted teeth made in the past 15 years; new approaches to the orthodontic finish (implementation of Andrews' "six keys to normal occlusion" with straight wires, accurate positioning of brackets, and gnathological positioners). Cases will be demonstrated.

  20. Obstructive sleep apnea treatment with dental appliance.

    Science.gov (United States)

    Reimão, R; De Gouveia, M M; Pestana, M C; Lopes, S R; Papaiz, E G; Papaiz, L F

    1994-12-01

    The case of a 40-year-old male patient with obstructive sleep apnea syndrome (OSAS) is reported, with emphasis on treatment with a dental appliance. This therapeutic approach, which has been focused on recent research, has as its objective, the posturing of the mandibule and, consequently, the tongue more anteriorly, thus in turn leading to an increase in the posterior oropharyngeal airway space (PAS). Cephalometry contributed determining in this case whereby enlargement limits were observed in the PAS with mandibular displacement. Clinical and polysomnographic controls showed subjective reduction of the excessive daytime sleepiness and objective decrease in apneas intensity to normal limits. Eight months follow-up evidenced the steady improvement.

  1. TO THE ISSUE OF IMPROVING THE EFFICIENCY OF STATE ECONOMIC MANAGEMENT AT THE REGIONAL AND FEDERAL LEVELS

    Directory of Open Access Journals (Sweden)

    Andreev S. Y.

    2015-02-01

    Full Text Available The article is devoted to the solution of such actual problem as improving the quality parameters of the state management at the different levels. As an object of study we consider the modern factors and conditions of improving the quality of decisions at the sphere of the state management of the socio-economic development of the national and regional economies. We believe raised questions in the formation of effective anti-crisis actions with government are up-to-date. The basis of the work is the developing of the number of offers to enhance the role of science, small and medium businesses in developing of the new forms of municipal and regional support of the real economy, as well as effective forms of the federal economic policy; the need in the evolution of the actual economic system is also raised, the offers to change banking services at the market are made. The article has a research nature, which is expressed by that authors, relying on different scientific works, practical and theoretical work experience of federal and regional authorities, express their position and offers to improve the quality of making solutions at the sphere of the state management of socio-economic development of the national and regional economies. The article is of interest of specialists of state and municipal management

  2. 46 CFR 108.665 - Appliances for watertight integrity.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Appliances for watertight integrity. 108.665 Section 108... DESIGN AND EQUIPMENT Equipment Markings and Instructions § 108.665 Appliances for watertight integrity. Each watertight door, scuttle, and hatch required for watertight integrity, which may be opened during...

  3. 46 CFR 78.47-38 - Valves and closing appliances.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Valves and closing appliances. 78.47-38 Section 78.47-38 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency Equipment, Etc. § 78.47-38 Valves and closing appliances. (a) All valves and...

  4. Interceptive therapy with elastodontic appliance: case report

    Science.gov (United States)

    Laganà, Giuseppina; Cozza, Paola

    2011-01-01

    Summary Aim of this report is to describe a case of a patient in mixed dentition with dento-skeletal class II malocclusion, deep bite, increased overjet and gummy smile. In this kind of clinical case the objectives of treatment were: to correct the dento-skeletal malocclusion, to obtain a correct overbite and overjet, to control the permanent teeth in a good eruption, to improve aesthetical conditions and to maintain clinical results. Treatment plan included just Occlus-o-guide®, the type that is indicated for mixed dentition (G type). The active phase of therapy was conducted in twelve months and the retention time was two years. Then the patient was controlled every three months and she used the appliance nighttime in alternance for one year more. Occlus-o-guide® was the indicated appliance to obtain all the objectives requested to solve the malocclusion. The early therapy with Occlus-o-guide® is easy, short and most of treated cases don’t need a second phase of orthodontic therapy. PMID:22238711

  5. Incorporating Experience Curves in Appliance Standards Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

    2011-10-31

    The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

  6. Embedded Systems for Smart Appliances and Energy Management

    CERN Document Server

    Neumann, Peter; Mahlknecht, Stefan

    2013-01-01

    This book provides a comprehensive introduction to embedded systems for smart appliances and energy management, bringing together for the first time a multidisciplinary blend of topics from embedded systems, information technology and power engineering.  Coverage includes challenges for future resource distribution grids, energy management in smart appliances, micro energy generation, demand response management, ultra-low power stand by, smart standby and communication networks in home and building automation.   Provides a comprehensive, multidisciplinary introduction to embedded systems for smart appliances and energy management; Equips researchers and engineers with information required to succeed in designing energy management for smart appliances; Includes coverage of resource distribution grids, energy management in smart appliances, micro energy generation, demand response management, ultra-low power stand by, smart standby and communication networks in home and building automation.  

  7. Low-cost and no-cost practice to achieve energy efficiency of government office buildings: A case study in federal territory of Malaysia

    Science.gov (United States)

    Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Ibrahim, Amlus

    2016-08-01

    This paper presents the findings of a case study to achieve energy-efficient performance of conventional office buildings in Malaysia. Two multi-storey office buildings in Federal Territory of Malaysia have been selected. The aim is to study building energy saving potential then to highlight the appropriate measures that can be implemented. Data was collected using benchmarking method by comparing the measured consumption to other similar office buildings and a series of preliminary audit which involves interviews, a brief review of utility and operating data as well as a walkthrough in the buildings. Additionally, in order to get a better understanding of major energy consumption in the selected buildings, general audit have been conducted to collect more detailed information about building operation. In the end, this study emphasized low-cost and no-cost practice to achieve energy efficiency with significant results in some cases.

  8. A comparative study of two-piece ostomy appliances.

    Science.gov (United States)

    Welser, Marion; Riedlinger, Inge; Prause, Ulla

    The quality of life of people with a stoma may be affected by peristomal skin disorders and by frequent unplanned changes of ostomy appliances due to problems with those appliances. The aim of this study was to evaluate two new, two-piece ostomy appliances with mechanical couplings (both from the SenSura range by Coloplast) and their ability to address areas that may be important to the quality of life of people with stomas, including appliance changes, stool seepage and overfilling. The study design featured two comparative, crossover, randomized multi-centre studies that were conducted in Germany. The SenSura appliances were evaluated against established reference appliances. Seventy-three individuals with a colostomy (closed-end appliances) and 75 individuals with an ileostomy (drainable appliances) participated in the studies. The participants tested 4-6 flanges of each type within a maximum period of two weeks. The results demonstrated that there was less seepage of stool observed under the SenSura flange when it was removed (p<0.05). Also, there were fewer unplanned changes (p<0.0005) seen with SenSura than with the reference appliances. The SenSura flanges had better adhesion and flexibility and were easier to remove than the references (p<0.0005), and they had greater resistance to erosion (p<0.05). In conclusion, SenSura performed better than the reference appliances on quality of life indicators - there were fewer unplanned changes and less seepage of stool was observed in patients using the SenSura products.

  9. 78 FR 40945 - Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise...

    Science.gov (United States)

    2013-07-09

    ...% better than Standard 90.1-2010). Building Energy Software Tools--U.S. DOE Building Technologies Program... software tools for evaluation energy efficiency, renewable energy, and sustainability in buildings. ASHRAE... clear legal standard for affected conduct, rather than a general standard and promote simplification and...

  10. Crew appliance concepts. Volume 2, appendix B: Shuttle orbiter appliances supporting engineering data. [food management and personal hygiene

    Science.gov (United States)

    Proctor, B. W.; Reysa, R. P.; Russell, D. J.

    1975-01-01

    Technical data collected for the food management and personal hygiene appliances considered for the shuttle orbiter are presented as well as plotted and tabulated trade study results for each appliance. Food storage, food operation, galley cleanup, waste collection/transfer, body cleansing, and personal grooming were analyzed.

  11. Crew appliance concepts. Volume 4, appendix C: Modular space station appliances supporting engineering data. [food management and personal hygiene

    Science.gov (United States)

    Proctor, B. W.; Reysa, R. P.; Russell, D. J.

    1975-01-01

    Data collected for the appliances considered for the space station are presented along with plotted and tabulated trade study results for each appliance. The food management, and personal hygiene data are applicable to a six-man mission of 180-days.

  12. The application of masonry chimney venting tables for oil-fired appliances

    Energy Technology Data Exchange (ETDEWEB)

    Krajewski, R.F.; Strasser, J. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    This paper presents an overview of the results of work in developing a set of rational guidelines for the venting of modern oil-fired appliances. The activities included the continued development and completion of the Oil-Heat Vent Analysis Program (OHVAP), Version 1.0 and the interpretation of nearly 2,000 runs in preparing recommendations for presentation in table form. These results are presented in the form of venting tables for the installation of chimney vent systems for mid- and high-efficiency oil-fired heating appliances using masonry chimneys. A brief description of OHVAP is given as well as a discussion of what the program does. Recommendations based on the results of OHVAP are presented in the form of five tables spanning oil-fired appliance Steady state Efficiencies (Eff{sub ss}) of 80% to 88%. The assumptions used in the calculations and examples of the computed results are presented as well as a discussion of the rationale for masonry chimney system treatment. Working examples are given with suggested diagnostic approaches for application of the table recommendations.

  13. Efficacy of Natural Products in Fixed Orthodontic Appliances (FOA Treatment ?A Dental Note

    Directory of Open Access Journals (Sweden)

    ARAVIND KUMAR.S

    2011-06-01

    Full Text Available Oral bacteria are the primary etiologic agents that cause dental caries/plaque. Bacteria have evolved to survive in the environment of the tooth surface, gingival epithelium, and oral cavity. Acidogenic oral bacteria like streptococcus mutans, streptococcus salivarius,Streptococcus mitis, Streptococcus sanguis and lactobacillus acidophilus primarily causes dental caries/plaque that surround orthodontic appliances in many patients undergoing Orthodontic treatment 1. Such bacteria can lead to tooth enamel breakdown and potential discoloration of the tooth surface, and these aesthetic changes can persist for many years after orthodontic treatment2, 3. Natural products derived from plant source are found to be highly efficient in eradicating the dental caries/plaque found in fixed orthodontic appliances patients undergoing orthodontic treatment

  14. Unilateral maxillary molar distalization with zygoma-gear appliance.

    Science.gov (United States)

    Kilkis, Dogan; Bayram, Mehmet; Celikoglu, Mevlut; Nur, Metin

    2012-08-01

    The aim of this study was to present the orthodontic treatment of a 15-year-old boy with a unilateral maxillary molar distalization system, called the zygoma-gear appliance. It consisted of a zygomatic anchorage miniplate, an inner bow, and a Sentalloy closed coil spring (GAC International, Bohemia, NY). A distalizing force of 350 g was used during the distalization period. The unilateral Class II malocclusion was corrected in 5 months with the zygoma-gear appliance. The maxillary left first molar showed distalization of 4 mm with an inclination of 3°. The maxillary premolars moved distally with the help of the transseptal fibers. In addition, there were slight decreases in overjet (-0.5 mm) and maxillary incisor inclination (-1°), indicating no anchorage loss from the zygoma-gear appliance. Preadjusted fixed appliances (0.022 × 0.028-in, MBT system; 3M Unitek, Monrovia, Calif) were placed in both arches to achieve leveling and alignment. After 14 months of unilateral distalization with the zygoma-gear appliance and fixed appliances, Class I molar and canine relationships were established with satisfactory interdigitation of the posterior teeth. Acceptable overjet and overbite were also achieved. This article shows that this new system, the zygoma-gear appliance, can be used for unilateral maxillary molar distalization without anchorage loss.

  15. Oral health with fixed appliances orthodontics

    Directory of Open Access Journals (Sweden)

    Konta, Brigitte

    2008-03-01

    Full Text Available Orthodontic treatment represents an important fraction in dental interventions. According to other medical methods the question for scientific evidence for the effectiveness of these treatments arises. The question of the effectiveness is connected with the question what is understood as an effect. In principle, the effect of the intervention is understood on the basis of the occlusion or dental health, what disregards further functions of oral health. The generalization to oral health is therefore a necessary consideration in science now. If one appreciates this further development, then there is no one single randomised study available which examines the long-term effect of the orthodontic intervention or for the effects on the oral health. The question, whether the application of a fixed appliance in an orthodontic treatment causes a long-term improvement in oral health, cannot be answered at the present time. The scientific status is the definition of oral health at present. Also the question, whether in the long run the dental health can be improved by fixed appliances cannot be answered with a quality usually achieved by evidence-based medicine. Whether correction of a dental malposition is an effective prerequisite for the preservation of the natural teeth, cannot be answered. There is no generalizing study with sufficient scientific background for Europe or Germany to this topic. The risk for caries cannot be quantified. Caries is identified as a central topic in general but due to numerous factors influencing the risk it is not quantified. The question of the indications is completely open from the scientific literature. For the question of the therapy need or therapy priority some indexes were developed, which lead to a quantification. These indices however are fundamentally criticised by recent research in their meaning and the empirical relevance. There is an impression that there exists a big gap between the practical application

  16. Angle Class II correction with MARA appliance

    Directory of Open Access Journals (Sweden)

    Kelly Chiqueto

    2013-02-01

    Full Text Available OBJECTIVE: To assess the effects produced by the MARA appliance in the treatment of Angle's Class II, division 1 malocclusion. METHODS: The sample consisted of 44 young patients divided into two groups: The MARA Group, with initial mean age of 11.99 years, treated with the MARA appliance for an average period of 1.11 years, and the Control Group, with initial mean age of 11.63 years, monitored for a mean period of 1.18 years with no treatment. Lateral cephalograms were used to compare the groups using cephalometric variables in the initial and final phases. For these comparisons, Student's t test was employed. RESULTS: MARA appliance produced the following effects: Maxillary growth restriction, no change in mandibular development, improvement in maxillomandibular relationship, increased lower anterior facial height and counterclockwise rotation of the functional occlusal plane. In the upper arch, the incisors moved lingually and retruded, while the molars moved distally and tipped distally. In the lower arch, the incisors proclined and protruded, whereas the molars mesialized and tipped mesially. Finally, there was a significant reduction in overbite and overjet, with an obvious improvement in molar relationship. CONCLUSIONS: It was concluded that the MARA appliance proved effective in correcting Angle's Class II, division 1 malocclusion while inducing skeletal changes and particularly dental changes.OBJETIVO: avaliar os efeitos proporcionados pelo aparelho MARA no tratamento da má oclusão de Classe II, 1ª divisão. MÉTODOS: utilizou-se uma amostra de 44 jovens, divididos em dois grupos - Grupo MARA, com idade inicial média de 11,99 anos e tratado com o aparelho MARA por um período médio de 1,11 ano; e Grupo Controle, com idade inicial média de 11,63 ano e observado por um período médio de 1,18 ano, sem nenhum tratamento. Utilizou-se as telerradiografias em norma lateral para comparar os grupos quanto às variáveis cefalométricas das

  17. Oral health with fixed appliances orthodontics

    Science.gov (United States)

    Frank, Wilhelm; Pfaller, Karin; Konta, Brigitte

    2008-01-01

    Orthodontic treatment represents an important fraction in dental interventions. According to other medical methods the question for scientific evidence for the effectiveness of these treatments arises. The question of the effectiveness is connected with the question what is understood as an effect. In principle, the effect of the intervention is understood on the basis of the occlusion or dental health, what disregards further functions of oral health. The generalization to oral health is therefore a necessary consideration in science now. If one appreciates this further development, then there is no one single randomised study available which examines the long-term effect of the orthodontic intervention or for the effects on the oral health. The question, whether the application of a fixed appliance in an orthodontic treatment causes a long-term improvement in oral health, cannot be answered at the present time. The scientific status is the definition of oral health at present. Also the question, whether in the long run the dental health can be improved by fixed appliances cannot be answered with a quality usually achieved by evidence-based medicine. Whether correction of a dental malposition is an effective prerequisite for the preservation of the natural teeth, cannot be answered. There is no generalizing study with sufficient scientific background for Europe or Germany to this topic. The risk for caries cannot be quantified. Caries is identified as a central topic in general but due to numerous factors influencing the risk it is not quantified. The question of the indications is completely open from the scientific literature. For the question of the therapy need or therapy priority some indexes were developed, which lead to a quantification. These indices however are fundamentally criticised by recent research in their meaning and the empirical relevance. There is an impression that there exists a big gap between the practical application and the scientific

  18. Obstructive sleep apnea treatment with dental appliance

    Directory of Open Access Journals (Sweden)

    Rubens Reimão

    1994-12-01

    Full Text Available The case of a 40-year-old male patient with obstructive sleep apnea syndrome (OSAS is reported, with emphasis on treatment with a dental appliance. This therapeutic approach, which has been focused on recent research, has as its objective, the posturing of the mandibule and, consequently, the tongue more anteriorly, thus in turn leading to an increase in the posterior oropharyngeal airway space (PAS. Cephalometry contributed determining in this case whereby enlargement limits were observed in the PAS with mandibular displacement. Clinical and polysomnographic controls showed subjective reduction of the excessive daytime sleepiness and objective decrease in apneas intensity to normal limits. Eight months follow-up evidenced the steady improvement.

  19. Study on Semantic Assets for Smart Appliances Interoperability : D-S3: THIRD INTERIM REPORT

    NARCIS (Netherlands)

    Daniele, L.M.; Hartog, F.T.H. den; Roes, J.B.M.

    2015-01-01

    About two thirds of the energy consumed by buildings originates from the residential sectors and thus household appliances. Household appliances or home appliances are electrical/mechanical machines which accomplish some household functions. Nowadays, appliances are not stand-alone systems anymore.

  20. 46 CFR 108.114 - Appliances for watertight and weathertight integrity.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Appliances for watertight and weathertight integrity... Appliances for watertight and weathertight integrity. (a) Appliances to ensure watertight integrity include... watertight decks and bulkheads. (b) Appliances to ensure weathertight integrity include weathertight doors...

  1. Study on Semantic Assets for Smart Appliances Interoperability : D-S3: THIRD INTERIM REPORT

    NARCIS (Netherlands)

    Daniele, L.M.; Hartog, F.T.H. den; Roes, J.B.M.

    2015-01-01

    About two thirds of the energy consumed by buildings originates from the residential sectors and thus household appliances. Household appliances or home appliances are electrical/mechanical machines which accomplish some household functions. Nowadays, appliances are not stand-alone systems anymore.

  2. Study on Semantic Assets for Smart Appliances Interoperability : D-S2: SECOND INTERIM REPORT

    NARCIS (Netherlands)

    Daniele, L.M.; Hartog, F.T.H. den; Roes, J.B.M.

    2014-01-01

    About two thirds of the energy consumed by buildings originates from the residential sectors and thus household appliances. Household appliances or home appliances are electrical/mechanical machines which accomplish some household functions. Nowadays, appliances are not stand-alone systems anymore.

  3. Study on Semantic Assets for Smart Appliances Interoperability : D-S1: FIRST INTERIM REPORT

    NARCIS (Netherlands)

    Hartog, F.T.H. den; Daniele, L.M.; Roes, J.B.M.

    2014-01-01

    About two thirds of the energy consumed by buildings originates from the residential sectors and thus household appliances. Household appliances or home appliances are electrical/mechanical machines which accomplish some household functions. Nowadays, appliances are not stand-alone systems anymore.

  4. Simulation technology for refrigeration and air conditioning appliances

    Institute of Scientific and Technical Information of China (English)

    DING Guoliang

    2006-01-01

    Simulation technology has been widely used for performance prediction and optimal design of refrigeration and air conditioning appliances. A brief history of simulation technology for refrigeration and air conditioning appliances is reviewed. The models for evaporator, condenser, compressor, capillary tube and thermal insulation layer are summarized, and a fast calculation method for thermodynamic properties of refrigerant is introduced in this paper. The model-based intelligent simulation technology and the simulation technology based on graph theory are also illustrated. Finally, an updated trend of simulation technology development for refrigeration and air conditioning appliances is discussed.

  5. Efficiency

    NARCIS (Netherlands)

    I.P. van Staveren (Irene)

    2009-01-01

    textabstractThe dominant economic theory, neoclassical economics, employs a single economic evaluative criterion: efficiency. Moreover, it assigns this criterion a very specific meaning. Other – heterodox – schools of thought in economics tend to use more open concepts of efficiency, related to comm

  6. A Cephalometric Comparison of Twin Block and Bionator Appliances in Treatment of Class II Malocclusion

    Science.gov (United States)

    Ahmadian-Babaki, Fatemeh; Araghbidi-Kashani, S. Mehdi

    2017-01-01

    Background Class II malocclusion is one of the most common orthodontic problems. In cases of class II malocclusion with mandibular deficiency, functional appliances often are used with the intent of stimulating mandibular growth. Bionator and twin block are two of the more popular functional appliances. The aim of this study was to compare the treatment outcomes of these two appliances using cephalometric radiographs. Material and Methods Cephalometric radiographs of 33 patients who had class II division I malocclusion, before and after treatment were digitalized. The mean changes in twin block and bionator groups were compared using independent t test. Results Twin block and bionator showed no statistically significant differences in cephalometric parameters except for ANB, NA-Pog, Basal and Ar-Go-Me angles. Conclusions There were no statistically significant differences in dentoalveolar and mandibular position between twin block and bionator (p>0.1). Twin block was more efficient in inhibition of forward movement of maxilla (p<0.1). Key words:Functional, Class II malocclusion, Cephalometrics, Twin block, Bionator, Treatment. PMID:28149473

  7. An enhanced security framework for home appliances in smart home

    National Research Council Canada - National Science Library

    Kang, Won Min; Moon, Seo Yeon; Park, Jong Hyuk

    2017-01-01

    .... These days, smart home service has drawn a lot of attention as a human-centric service. It is the environment where home appliances and other smart devices are connected to internet in order for user service and experience...

  8. 49 CFR 238.230 - Safety appliances-new equipment.

    Science.gov (United States)

    2010-10-01

    ... that the standard provides for the same complement of handholds, sill steps, ladders, hand or parking brakes, running boards, and other safety appliances as are required for a piece of equipment of...

  9. The effect of orthodontic extraoral appliances on depression and the ...

    African Journals Online (AJOL)

    The effect of orthodontic extraoral appliances on depression and the anxiety levels ... anxiety in patients after fixed orthodontic treatment are important parameters that ... Materials and Methods: Patients and one of their parents responded to a ...

  10. Detailed Modeling and Response of Demand Response Enabled Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Vyakaranam, Bharat; Fuller, Jason C.

    2014-04-14

    Proper modeling of end use loads is very important in order to predict their behavior, and how they interact with the power system, including voltage and temperature dependencies, power system and load control functions, and the complex interactions that occur between devices in such an interconnected system. This paper develops multi-state time variant residential appliance models with demand response enabled capabilities in the GridLAB-DTM simulation environment. These models represent not only the baseline instantaneous power demand and energy consumption, but the control systems developed by GE Appliances to enable response to demand response signals and the change in behavior of the appliance in response to the signal. These DR enabled appliances are simulated to estimate their capability to reduce peak demand and energy consumption.

  11. [Neon-colored plastics for orthodontic appliances. Biocompatibility studies].

    Science.gov (United States)

    Schendel, K U; Erdinger, L; Komposch, G; Sonntag, H G

    1995-01-01

    Public concern and issues of liability have made product safety a major concern throughout the medical field including orthodontics. The purpose of this study was to test the biocompatibility of the new neon colored plastic materials to be used for removable orthodontic appliances before they reach the market and are used in patient treatment. In addition, eight modifications of this synthetic material, which has been used in appliances for many years, were examined without neon color. The procedures established tested for: 1. mutagenicity, 2. toxicity, and 3. irritation of the mucous membrane. As alternatives to using animals the Ames Test, the Agar Overlay Assay, and the HET-CAM Test were employed to test for these properties. The tests revealed that, when the manufacturer's instructions are followed, neither the polymerized materials as used in patient appliances nor the shavings resulting from the orthodontist or the technician grinding the appliance exhibit mutagenic, toxic, or irritating properties.

  12. An extraorally activated expansion appliance for cleft palate infants.

    Science.gov (United States)

    Latham, R A; Kusy, R P; Georgiade, N G

    1976-07-01

    A new lever-action expansion appliance is described which is designed specifically for use in infants with cleft lip and palate. An extraoral control knob allows for easy activation, while the important anterior cleft areas are left clear for premaxillary repositioning and clinical assessment. Activation is registered by a positive clicking sound. Rapid expansion is made possible by the design of the appliance which is retained by stainless steel pins.

  13. Formal Modeling for Information Appliance Using Abstract MVC Architecture

    OpenAIRE

    Arichika, Yuji; Araki, Keijiro

    2004-01-01

    In information appliance development, it is important to divide core functions and display functions because information appliance have various user interface and display functions changed frequently. Using MVC architecture is one way to divide display functions and core functions. But MVC architecture is implementation architecture and there are some gaps to get abstract model. On the other hand it is known that formal methods are useful for constructing abstract model. Therefore we intend t...

  14. Electrical part Temelin NPP - important electrical appliance power supply

    OpenAIRE

    Trnka, Radek

    2009-01-01

    Radek Trnka Department of Physics, Faculty of Education, University of South Bohemia Electrical part of Temelin Nuclear Power Station - Power supply of important electrical appliances The subject of this bachelor's work is an elaboration of problems of secured electric power supply for all important appliances in Temelin Nuclear Power Station (JE Temelin). There is an essential electrical conception of the nuclear power station described there, as well as possibilities of failure state emerge...

  15. The Effectiveness and Clinical Usability of a Handheld Information Appliance

    Directory of Open Access Journals (Sweden)

    Patricia A. Abbott

    2012-01-01

    Full Text Available Clinical environments are complex, stressful, and safety critical—heightening the demand for technological solutions that will help clinicians manage health information efficiently and safely. The industry has responded by creating numerous, increasingly compact and powerful health IT devices that fit in a pocket, hook to a belt, attach to eyeglasses, or wheel around on a cart. Untethering a provider from a physical “place” with compact, mobile technology while delivering the right information at the right time and at the right location are generally welcomed in clinical environments. These developments however, must be looked at ecumenically. The cognitive load of clinicians who are occupied with managing or operating several different devices during the process of a patient encounter is increased, and we know from decades of research that cognitive overload frequently leads to error. “Technology crowding,” enhanced by the plethora of mobile health IT, can actually become an additional millstone for busy clinicians. This study was designed to gain a deeper understanding of clinicians’ interactions with a mobile clinical computing appliance (Motion Computing C5 designed to consolidate numerous technological functions into an all-in-one device. Features of usability and comparisons to current methods of documentation and task performance were undertaken and results are described.

  16. A new approach to household appliance energy test procedures

    Energy Technology Data Exchange (ETDEWEB)

    Ernebrant, S.; Wihlborg, M.

    1999-03-01

    Energy test procedures provides the industry with a method to measure its products energy consumption. The energy test procedures are the technical foundation to every energy standard and labelling system. Depending on which country the product is going to be sold in, the manufacturers must follow different standards. This report concentrates on appliance test procedures, with the main focus on refrigerators. Recently, a new technology -microcontrollers- is undermining the credibility of the test procedures. New features, saving energy in real-life, are not picked up by the test procedures. It is estimated that as much as 30% of energy could be saved with this technology. Microcontrollers have also led to the possibility to circumvent tests. A new model is presented in the report, which handles these energy savings and make it harder cheating on tests. The model divides the test procedure in two parts; hardware tests and software tests, and uses a Matlab/Simulink computer model to calculate the energy consumption. Examples of hardware- and software test methods for refrigerators are described. A refrigerator is used as an example to present the model. The possibility to harmonize the energy standards to one global standard, which could mean substantial savings and make international trade more efficient, is also discussed 24 refs, 30 figs. Examination paper

  17. Modeling diffusion of electrical appliances in the residential sector

    Energy Technology Data Exchange (ETDEWEB)

    McNeil, Michael A.; Letschert, Virginie E.

    2009-11-22

    This paper presents a methodology for modeling residential appliance uptake as a function of root macroeconomic drivers. The analysis concentrates on four major energy end uses in the residential sector: refrigerators, washing machines, televisions and air conditioners. The model employs linear regression analysis to parameterize appliance ownership in terms of household income, urbanization and electrification rates according to a standard binary choice (logistic) function. The underlying household appliance ownership data are gathered from a variety of sources including energy consumption and more general standard of living surveys. These data span a wide range of countries, including many developing countries for which appliance ownership is currently low, but likely to grow significantly over the next decades as a result of economic development. The result is a 'global' parameterization of appliance ownership rates as a function of widely available macroeconomic variables for the four appliances studied, which provides a reliable basis for interpolation where data are not available, and forecasting of ownership rates on a global scale. The main value of this method is to form the foundation of bottom-up energy demand forecasts, project energy-related greenhouse gas emissions, and allow for the construction of detailed emissions mitigation scenarios.

  18. [Interceptive treatment with the DAC appliance: structural analysis].

    Science.gov (United States)

    Gebeile-Chauty, Sarah; Archer, Jean-Antoine; Lautrou, Alain; Aknin, Jean-Jacques

    2007-12-01

    The aim of this retrospective short and middle term study was to evaluate dental and skeletal effects during early class II treatment. Thirty subjects were treated with DAC appliance, 32 children were not treated. Data were collected at the start of the study (t(1)), after the active treatment (t(1')) and 28 months after t(1) (t(2)). L.D.V. and Tweed cephalometric analyses were applied on the lateral roentgenograms of the three groups. Differences for all the variables from t(1) to t(1') and t(2) were calculated and compared by t-test. Results suggested that DAC appliance was able to achieve twice more mandibular growth in the treated group than in the non treated group. Anterior total skeletal and matricial rotations were similar to control group. Early DAC appliance achieved overjet correction thanks to major skeletal participation (89%) and little dental participation (11%). During following-up stage, overjet relapsed partially as shown in other articles with other appliances. As a conclusion, DAC appliance may be an orthopedic appliance indicated to achieve correction in class II skeletal pattern without maxillary prognathism and with mandibular retrognathism.

  19. Federal Holidays

    Data.gov (United States)

    Office of Personnel Management — Federal law (5 U.S.C. 6103) establishes the following public holidays for Federal employees. Please note that most Federal employees work on a Monday through Friday...

  20. Posibilities Of Appliance Of Therapeutic Laser

    Science.gov (United States)

    Machnikowski, I.; Spiechowicz, E.

    1987-10-01

    The appliance of a therapeutic laser also known as soft laser has gained wider scope in the latest years. The main characteristics of the laser radiation, namely its monochromatic and coherent nature render the photochemic activity selecive especially on the intracelluar level, stimulating the dynamics of the oxido-reductive changes in a cell. The action of the laser beam upon living tissue depends on the power of the used laser as well as upon the physical properties of the object itself i.e. its optical, mechanical, chemical properties. The use of a high powered laser causes a big rise in the temperature and prescure inside tissue which leads to denaturation of protein and than to evaporation and destruction of the cell. It is possible to gain quite diffrent effects using a soft /or therapeutic/ laser which in the course of stimulating the biological changes in a cell causes its regeneration and not its degradation. There exist three main phenomena on the level of the radiation emition. These are absorption, reflection and penetration. The most important from the medical point of view are penetration and absorption, for the direct biological changes depend upon these very parameters. The action of the laser beam upon tissue in fig. 1.

  1. Emergencies in orthodontics. Part 1: Management of general orthodontic problems as well as common problems with fixed appliances.

    Science.gov (United States)

    Dowsing, Paul; Murray, Alison; Sandler, Jonathan

    2015-03-01

    Fixed appliance treatment is a popular treatment modality with a burgeoning increase in the numbers of children and adults realizing the benefits that can be gained. Appliance breakage is an unavoidable nuisance which is at best inconvenient, and at worst may result in significant pain or discomfort for the patient. General dental practitioners (GDPs) should have the practical knowledge of how to provide timely and appropriate orthodontic 'emergency treatment'. This will significantly reduce the sometimes considerable inconvenience and discomfort for both the patient and his/her parents, and the inevitable frustration for the clinician providing ongoing care. This first paper will deal with general orthodontic problems that commonly present, as well as some issues specific to fixed appliances. The second paper will deal with the other orthodontic appliances that may be encountered by GDPs in their daily practice. Clinical Relevance: Appropriate handling of an orthodontic 'emergency' by the general practitioner will, on many occasions, provide immediate relief of pain and distress for the patient. This will in turn allow treatment to continue moving in the right direction, thus allowing more efficient and effective use of valuable resources.

  2. Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Fridley, David; McNeil, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing

    2011-04-01

    China has implemented a series of minimum energy performance standards (MEPS) for over 30 appliances, voluntary energy efficiency label for 40 products and a mandatory energy information label that covers 19 products to date. However, the impact of these programs and their savings potential has not been evaluated on a consistent basis. This paper uses modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, under development or those proposed for development in 2010 under three scenarios that differ in the pace and stringency of MEPS development. In addition to a baseline 'Frozen Efficiency' scenario at 2009 MEPS level, the 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice efficiency in broad commercial use today in 2014. This paper concludes that under 'CIS', cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions of energy used for all 37 products would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction of energy used for 11 appliances would be 35% lower.

  3. Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Fridley, David; McNeil, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing

    2011-04-01

    China has implemented a series of minimum energy performance standards (MEPS) for over 30 appliances, voluntary energy efficiency label for 40 products and a mandatory energy information label that covers 19 products to date. However, the impact of these programs and their savings potential has not been evaluated on a consistent basis. This paper uses modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, under development or those proposed for development in 2010 under three scenarios that differ in the pace and stringency of MEPS development. In addition to a baseline 'Frozen Efficiency' scenario at 2009 MEPS level, the 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice efficiency in broad commercial use today in 2014. This paper concludes that under 'CIS', cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions of energy used for all 37 products would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction of energy used for 11 appliances would be 35% lower.

  4. New horizons in orthodontics & dentofacial orthopedics: fixed Twin Blocks & TransForce lingual appliances.

    Science.gov (United States)

    Clark, William John

    2011-01-01

    During the 20th century functional appliances evolved from night time wear to more flexible appliances for increased day time wear to full time wear with Twin Block appliances. The current trend is towards fixed functional appliances and this paper introduces the Fixed Twin Block, bonded to the teeth to eliminate problems of compliance in functional therapy. TransForce lingual appliances are pre-activated and may be used in first phase treatment for sagittal and transverse arch development. Alternatively they may be integrated with fixed appliances at any stage of treatment.

  5. Tax incentives in fiscal federalism

    DEFF Research Database (Denmark)

    Kelders, Christian; Köthenbürger, Marko

    2010-01-01

    Models of fiscal federalism rarely account for the efficiency implications of intergovernmental fiscal ties for federal tax policy. This paper shows that fiscal institutions such that federal tax deductibility, vertical revenue-sharing, and fiscal equalization (being common features of existing...... federations) encourage local taxation, but may discourage federal taxation. Furthermore, the structure of public spending is skewed towards local spending. We also show that, when considering Leviathan governments, fiscal institutions reduce confiscatory taxation by the federal government. The result...... is contrary to the Cartelization Hypothesis ( Brennan and Buchanan 1980 ). Finally, we characterize the efficient design of intergovernmental fiscal ties....

  6. Enabling Graph Appliance for Genome Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Rina [ORNL; Graves, Jeffrey A [ORNL; Lee, Sangkeun (Matt) [ORNL; Sukumar, Sreenivas R [ORNL; Shankar, Mallikarjun [ORNL

    2015-01-01

    In recent years, there has been a huge growth in the amount of genomic data available as reads generated from various genome sequencers. The number of reads generated can be huge, ranging from hundreds to billions of nucleotide, each varying in size. Assembling such large amounts of data is one of the challenging computational problems for both biomedical and data scientists. Most of the genome assemblers developed have used de Bruijn graph techniques. A de Bruijn graph represents a collection of read sequences by billions of vertices and edges, which require large amounts of memory and computational power to store and process. This is the major drawback to de Bruijn graph assembly. Massively parallel, multi-threaded, shared memory systems can be leveraged to overcome some of these issues. The objective of our research is to investigate the feasibility and scalability issues of de Bruijn graph assembly on Cray s Urika-GD system; Urika-GD is a high performance graph appliance with a large shared memory and massively multithreaded custom processor designed for executing SPARQL queries over large-scale RDF data sets. However, to the best of our knowledge, there is no research on representing a de Bruijn graph as an RDF graph or finding Eulerian paths in RDF graphs using SPARQL for potential genome discovery. In this paper, we address the issues involved in representing a de Bruin graphs as RDF graphs and propose an iterative querying approach for finding Eulerian paths in large RDF graphs. We evaluate the performance of our implementation on real world ebola genome datasets and illustrate how genome assembly can be accomplished with Urika-GD using iterative SPARQL queries.

  7. Ubiquitous Monitoring of Electrical Household Appliances 

    Directory of Open Access Journals (Sweden)

    Raquel Lacuesta

    2012-11-01

    Full Text Available The number of appliances at home is increasing continuously, mainly because they make our lives easier. Currently, technology is integrated in all objects of our daily life. TCP/IP let us monitor our home in real time and check ubiquitously if something is happening at home. Bearing in mind this idea, we have developed a low-cost system, which can be used in any type of electrical household appliance that takes information from the appliance and posts the information to the Twitter Social network. Several sensors placed in the household appliances gather the sensed data and send them wired or wirelessly, depending on the case, using small and cheap devices to a gateway located in the home. This gateway takes decisions, based on the received data, and sends notifications to Twitter. We have developed a software application that takes the values and decides when to issue an alarm to the registered users (Twitter friends of our smart home. The performance of our system has been measured taking into account the home network (using IEEE 802.3u and IEEE 802.11g and the data publishing in Twitter. As a result, we have generated an original product and service for any electrical household appliance, regardless of the model and manufacturer, that helps home users improve their quality of life. The paper also shows that there is no system with the same innovative features like the ones presented in this paper.

  8. The influence of fixed orthodontic appliances on halitosis.

    Science.gov (United States)

    Zurfluh, Monika A; van Waes, Hubertus J M; Filippi, Andreas

    2013-01-01

    Halitosis is a widely spread condition. There are numerous causes. The aim of this study was to investigate the influence of fixed orthodontic appliances on the occurrence of halitosis. 55 patients in an orthodontic practice were monitored at three points in time after application of orthodontic appliance (T1: immediately after application, T2: 4 weeks after application, T3: 3 months after application). Monitoring included patient self-evaluation, plaque index, tongue coating index and organoleptic measurement. The subjective parameters taste, dry mouth and breath odor did not show statistical differences. However, with the presence of fixed orthodontic appliances, confidence when performing dental hygiene decreased statistically significantly (p = 0.003). Additionally, the tongue coating index showed a statistically significant difference between T1 and T2 (p = 0.012) as well as T1 and T3 (p ⟩ 0.001). Analogous results were found for organoleptic measurement (T1 and T2 [p = 0.002]; T1 and T3 [p ⟨ 0.001]) and plaque index (T1 and T2/ T3 [p ⟨ 0.001]). Fixed orthodontic appliances lead to a statistically significant increase of the plaque and tongue coating indices. A statistically significant increase was also observed with organoleptic measurement scores. The suspected positive correlation between halitosis and fixed orthodontic appliances was confirmed. Halitosis can be an important indicator of oral health during orthodontic treatment and can serve as a motivating factor for adequate patient oral health care maintenance.

  9. Electronic Control System Of Home Appliances Using Speech Command Words

    Directory of Open Access Journals (Sweden)

    Aye Min Soe

    2015-06-01

    Full Text Available Abstract The main idea of this paper is to develop a speech recognition system. By using this system smart home appliances are controlled by spoken words. The spoken words chosen for recognition are Fan On Fan Off Light On Light Off TV On and TV Off. The input of the system takes speech signals to control home appliances. The proposed system has two main parts speech recognition and smart home appliances electronic control system. Speech recognition is implemented in MATLAB environment. In this process it contains two main modules feature extraction and feature matching. Mel Frequency Cepstral Coefficients MFCC is used for feature extraction. Vector Quantization VQ approach using clustering algorithm is applied for feature matching. In electrical home appliances control system RF module is used to carry command signal from PC to microcontroller wirelessly. Microcontroller is connected to driver circuit for relay and motor. The input commands are recognized very well. The system is a good performance to control home appliances by spoken words.

  10. Class II malocclusion therapy using fixed orthodontic appliance

    Directory of Open Access Journals (Sweden)

    Škufca Bojan

    2007-01-01

    Full Text Available Background. Depending on the indication, and the age of a patient, class II division I malocclusion can be treated by a fixed or mobile orthodontic appliance, with or without teeth extraction. Case report. A treatment of a male patient, 15 years old, with dentoalveolar class II division I was described. On the base of clinical findings, study case analysis, analysis of orthopan and profile cephalogram, there were class II division I with protrusion of frontal teeth and mild crowding in lower jaw assessed. The patient was treated by fixed orthodontics appliances (SWA Roth .022" in both jaws for 18 months, with the retention period of the same length. Conclusion. Fixed ortodontic appliances are necessary when bodily movement of the teeth is indicated - in this case for cuspids distalization and retraction of incisors.

  11. Management of anterior dental crossbite with removable appliances

    Directory of Open Access Journals (Sweden)

    Ayca Tuba Ulusoy

    2013-01-01

    Full Text Available This case report describes the treatment of an 8-year-old girl with anterior dental crossbite using a series of removable appliances to bring the teeth into a normal position. Clinical presentation and intervention: A removable acrylic appliance with a bite plate incorporating a screw was used to correct the anterior dental crossbite and align the incisors. The subsequent eruption of the maxillary left lateral incisor on the palatinal side was treated with a second acrylic plate incorporating a labiolingual spring. After an 8-month period, the anterior crossbite involving multiple incisors was corrected.

  12. Orthodontic parotitis: a rare complication from an orthodontic appliance.

    Science.gov (United States)

    McCarthy, Eileen; Cobb, Alistair R M

    2012-12-01

    A case is presented of a 14-year-old female undergoing orthodontic fixed appliance treatment who presented with right facial swelling in the parotid region. An initial diagnosis of acute infective parotitis was made by her primary care clinician. However, after clinical examination and ultrasonographic imaging, a diagnosis of salivary stasis secondary to inflammatory occlusion of Stensen's ductal orifice was made. The ductal orifice had been traumatized by the adjacent orthodontic appliance. This has not been described before in the literature. The differential diagnosis of parotid enlargement in children is discussed.

  13. Reducing Electricity Demand Peaks by Scheduling Home Appliances Usage

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana; Kardaras, Georgios; Iversen, Villy Bæk

    2011-01-01

    (RFS) algorithm, which was originally developed for telecommunication networks, is applied. The purpose is to analyze how a power consumption limit and priorities for home appliances will affect the demand peak and the users’ everyday life. Verification of the effectiveness of the RFS algorithm is done....... Moreover, users can be granted lower electricity bill rates for accepting delaying the operation of some of their appliances. In order to analyze this scenario, teletraffic engineering theory, which is used in evaluating the performance of telecommunication networks, is used. A reversible fair scheduling...

  14. Design and Implementation of the Information Appliance's Home Gateway Based on CORBA

    Institute of Scientific and Technical Information of China (English)

    ZHU Zhu; LIU Hong

    2010-01-01

    With the emergence of a variety of IA (information appliances) and the development of network technology, a convenient and effective platform is needed to control home appliances.This paper presents a "Web_CORBA home gateway" ,provides an inter-face definition of information appliances and eventually complete the internet remote control.Information Appliance refrigerator to be given as an example of the specific design process.

  15. Correction of an adult Class II division 2 individual using fixed functional appliance: A noncompliance approach

    OpenAIRE

    Shrinivas Basavaraddi; Gandedkar, Narayan H; Anup Belludi; Anand Patil

    2016-01-01

    This case report describes the application of fixed functional appliance in the treatment of an adult female having Class II division 2 malocclusion with retroclination of upper incisors. Fixed functional appliance was used to correct the overjet after the uprighting of upper incisors. Fixed functional appliance was fitted on a rigid rectangular arch wire. Application of fixed functional appliance achieved a good Class I molar relationship along with Class I canine relationship with normal ov...

  16. Federalism Lives.

    Science.gov (United States)

    Howard, A. E. Dick

    1987-01-01

    Examines the concept of federalism in terms of its past history and its encouraging future. Calls for a revival of concern for federalism not simply as a convenient administrative arrangement but as a fundamental constitutional value. (BSR)

  17. Smart meter deployment optimisation and its analysis for appliance load monitoring

    Directory of Open Access Journals (Sweden)

    Ahmed Shaharyar Khwaja

    2015-04-01

    Full Text Available In this study, the authors study the problem of smart meter deployment optimisation for appliance load monitoring, that is, to monitor a number of devices without any ambiguity using the minimum number of low-cost smart meters. The importance of this problem is due to the fact that the number of meters should be reduced to decrease the deployment cost, improve reliability and decrease congestion. In this way, in future, smart meters can provide additional information about the type and number of distinct devices connected, besides their normal functionalities concerned with providing overall energy measurements and their communication. The authors present two exact smart meter deployment optimisation algorithms, one based on exhaustive search and the other based on efficient implementation of the exhaustive search. They formulate the problem mathematically and present computational complexity analysis of their algorithms. Simulation scenarios show that for a typical number of home appliances, the efficient search method is significantly faster compared to the exhaustive search and can provide the same optimal solution. The authors also show the dependency of their method on the distribution of the load pattern that can potentially be in a typical household.

  18. Avulsion of posterior primary teeth and space maintaining appliance: case report.

    Science.gov (United States)

    Rocha, M J; Cardoso, M; de Oliveira, J

    2000-01-01

    A four-year-old child was presented to the Pediatric Dentistry Clinic of the Federal University, 21 days after an incident in which canine first and second primary molar teeth were avulsed, due to a trauma to the face. This was confirmed on radiological examination. The clinical examinations showed that tissues were normal. A removable space-maintaining dental-mucosa supported appliance was made in acrylic resin to replace the three missing teeth. After a period of eight months, the tissues were preserved, the device is helping the child to eat, to speak, and preserving the appearance of the patient. Radiograph examinations have shown that the first molar tooth and canine, first pre molar and second pre molar teeth are erupting normally. Trauma in primary dentition can cause psychological, morphological and functional problems. In the presented case the treatment was planned to recuperate the function and to avoid problems from the premature loss of primary teeth.

  19. Drawing on international experience to reform the Belgian market for ostomy appliances.

    Science.gov (United States)

    Simoens, Steven; Van den Steen, Dirk; Vanleene, Veerle; De Maré, Luc; Moldenaers, Ingrid; Debruyne, Hans; Ramaekers, Dirk

    2007-02-01

    This article aims to review the regulatory framework governing the Belgian ostomy appliance market in the light of the experience of Denmark, France, the Netherlands and Ontario (Canada) with regulation of ostomy appliances. Information about the regulatory framework was derived from the international literature, analysis of legal texts and a survey completed by national experts. The comparative analysis revealed that these countries have adopted varying approaches towards regulating their domestic ostomy appliance market. Strategies to keep down prices include public procurement in Denmark, maximum prices in France and exclusion of expensive appliances from reimbursement in the Netherlands. To contain public expenditure on ostomy appliances, consumption patterns are monitored in the Netherlands, the quantity of reimbursed appliances is limited in Belgium and public reimbursement is restricted in Ontario. Ostomy appliances are generally distributed by community pharmacies and medical equipment shops. In countries that emphasise home care delivery such as Denmark, domiciliary distributors dominate the market to the detriment of community pharmacies which do not seem to be able to offer this service at a competitive price. An avenue for reforming the Belgian ostomy appliance market is proposed which valorizes the role of ostomy care nurses in guiding the choice of ostomy appliances. Furthermore, it is recommended that a competitive tendering process determines the price of ostomy appliances, that reimbursement for service provision by distributors is separated from reimbursement of appliances, and that patients receive a fixed grant from the third-party payer to buy ostomy appliances.

  20. 77 FR 61385 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Antidumping...

    Science.gov (United States)

    2012-10-09

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... duty order on certain kitchen appliance shelving and racks from the People's Republic of China (``PRC... purposes, the written product description, available in Certain Kitchen Appliance Shelving and Racks...

  1. 77 FR 72324 - Certain Kitchen Appliance Shelving and Racks from the People's Republic of China: Countervailing...

    Science.gov (United States)

    2012-12-05

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks from the People's Republic of... rescission of administrative review concerning the countervailing duty order on certain kitchen appliance shelving and racks from the People's Republic of China. See Certain Kitchen Appliance Shelving and...

  2. Anteroposterior and vertical changes in skeletal class II patients treated with modified Thurow appliance.

    Science.gov (United States)

    Pithon, Matheus Melo; dos Santos, Rogério Lacerda; Sampaio, Gêisa Aiane de Morais; de Meneses, Izaura Helena Chaves; Coqueiro, Raildo Silva

    2014-01-01

    The aim of this study was to evaluate the post-treatment anteroposterior and vertical alterations in skeletal Class II malocclusion with different maxillary patterns in patients treated with modified Thurow appliance. Forty-five patients (22 girls and 23 boys) with skeletal Class II and angle SN.GoGn ≤ 35 and different maxillary patterns (n = 15), as follows: retrusive (SNA84°) maxilla; mean age 9 years at pre-treatment (T1) and 9 years and 10 months at post-treatment (T2), were treated with modified Thurow cervical traction appliance, with expander screw and extraoral face bow with 10° to 20° fold in relation to the intraoral arch. Force of 500 gf was applied and use for 12 to 14 h/day, with fortnightly adjustments. Analysis of variance ANOVA followed by post-hoc Tukey and Kruskal-Wallis test, followed by Mann-Whitney were used (α = 5%). In changes obtained from stage T1 to T2, no statistically significant differences were found among the groups Protrusive, normal and retrusive maxilla for the variables SNB, SN.GoGn, 1.NA, overjet, overbite and Class II discrepancy (right and left) (p>0.05). Angular measurements SNA and ANB in the protrusive maxilla group were significantly greater than in the normal and retrusive maxilla groups (p0.05). Within the limits of this study, it may be concluded that the modified Thurow cervical traction appliance was efficient for the correction of skeletal Class II irrespective of the maxillary pattern. The mandible had no significant rotation during treatment.

  3. Efficiency of Rectification: Reversible vs. Irreversible Regimes

    Science.gov (United States)

    Sokolov, I. M.

    2002-11-01

    Both man-made locomotive devices and molecular motors use gears to transform a reciprocating motion into a directed one. One of the most common gears is a rectifier, a mechanically irreversible appliance. The maximal energetic efficiency of an isothermic gear is bounded by unity, as a consequence of the Second Law. However, approaching this ideal efficiency does not imply approaching reversibility. We discuss what properties of a rectifier mostly influence the transduction efficiency and show that an appliance which locks under backward force is just the one which can approach the ideal efficiency either in the reversible or in the irreversible regime.

  4. Low-complexity energy disaggregation using appliance load modelling

    Directory of Open Access Journals (Sweden)

    Hana Altrabalsi

    2016-01-01

    Full Text Available Large-scale smart metering deployments and energy saving targets across the world have ignited renewed interest in residential non-intrusive appliance load monitoring (NALM, that is, disaggregating total household’s energy consumption down to individual appliances, using purely analytical tools. Despite increased research efforts, NALM techniques that can disaggregate power loads at low sampling rates are still not accurate and/or practical enough, requiring substantial customer input and long training periods. In this paper, we address these challenges via a practical low-complexity lowrate NALM, by proposing two approaches based on a combination of the following machine learning techniques: k-means clustering and Support Vector Machine, exploiting their strengths and addressing their individual weaknesses. The first proposed supervised approach is a low-complexity method that requires very short training period and is fairly accurate even in the presence of labelling errors. The second approach relies on a database of appliance signatures that we designed using publicly available datasets. The database compactly represents over 200 appliances using statistical modelling of measured active power. Experimental results on three datasets from US, Italy, Austria and UK, demonstrate the reliability and practicality.

  5. Interoperability for smart appliances in the IoT world

    NARCIS (Netherlands)

    Daniele, L.; Solanki, M.; Hartog, F. den; Roes, J.

    2016-01-01

    Household appliances are set to become highly intelligent, smart and networked devices in the near future. Systematically deployed on the Internet of Things (IoT), they would be able to form complete energy consuming, producing, and managing ecosystems. Smart systems are technically very

  6. Energy conservation opportunities in commercial appliances. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hurley, J.R.; Searight, E.F.; Wong, A.

    1978-12-01

    This study establishes a data base of energy-consuming appliances in the commercial sector, and identifies and rates the most-promising development opportunities that would save significant amounts of energy on a national level. A detailed national inventory of 45 major appliances and their energy consumption was established for the year 1975. Thirty-four potential appliance improvements were identified, evaluated, and ranked. The opportunities are identified by means of a literature search and contact with industry representatives. The commercial sector is defined in terms of the divisions prescribed in the S.I.C. Manual (1972) of the OMB. These groups are recombined into the commercial subsectors of communications; utilities; wholesale; retail; finance, insurance, real estate, and services; hospital; schools; and public administration. The major energy-consuming appliances in the following six functional-use categories were identified: space heating and cooling; water heating; refrigeration; cooking; and lighting. The equipment in these categories was estimated to consume 87% of the total energy used in the commercial sector, with the remaining 13% consumed by equipment such as computers, business machines, laundry equipment, dishwashing, and other food-service equipment. (MCW)

  7. Scheduling home-appliances to optimize energy consumption

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana

    In order to optimize the energy consumption, energy demand peaks should be avoided, and energy consumption should be smoothly distributed over time. This can be achieved by setting a maximum energy consumption per user’s household. In other words, the overall consumption of the user’s appliances ...

  8. Refrigeration Controls: Electrical & Mechanical; Appliance Repair 3: 9027.02.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This booklet outlines a course designed to equip major appliance service students with the fundamental knowledge and understanding of procedures, basic electrical circuitry, and nomenclatures of components necessary in successfully tracing a circuit and repairing or replacing a malfunctioning component. Course content includes goals, specific…

  9. 24 CFR 3280.709 - Installation of appliances.

    Science.gov (United States)

    2010-04-01

    ... to avoid displacement. For the purpose of servicing and replacement, each appliance shall be both... the manufactured home. Any opening for ducts, piping, wiring, etc., shall be sealed. (e) A forced air... enclosure. (3) Cooling coils installed as a portion of, or in connection with, any forced-air furnace...

  10. Scheduling home-appliances to optimize energy consumption

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana

    In order to optimize the energy consumption, energy demand peaks should be avoided, and energy consumption should be smoothly distributed over time. This can be achieved by setting a maximum energy consumption per user’s household. In other words, the overall consumption of the user’s appliances...

  11. The semiotics of smart appliances and pervasive computing

    DEFF Research Database (Denmark)

    Andersen, Peter Bøgh; Brynskov, Martin

    2007-01-01

    This paper presents Digital Habitats, a conceptual and methodological framework for analyzing and designing smart appliances in the context of pervasive computing. The concrete topic is a project in pervasive gaming for children. The paper is semiotic in two senses: on the one hand, it is based...

  12. Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Fridley, David; McNeill, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing; Saheb, Yamina

    2010-06-07

    China is now the world's largest producer and consumer of household appliances and commercial equipment. To address the growth of electricity use of the appliances, China has implemented a series of minimum energy performance standards (MEPS) for 30 appliances, and voluntary energy efficiency label for 40 products. Further, in 2005, China started a mandatory energy information label that covers 19 products to date. However, the impact of these standard and labeling programs and their savings potential has not been evaluated on a consistent basis. This research involved modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, or under development and those proposed for development in 2010. Two scenarios that have been developed differ primarily in the pace and stringency of MEPS development. The 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step considering the technical limitation of the technology. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice MEPS in 2014. This paper concludes that under the 'CIS' of regularly scheduled MEPS revisions to 2030, cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction would be 35% lower than in the frozen scenario.

  13. Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Fridley, David; McNeill, Michael; Zheng, Nina; Letschert, Virginie; Ke, Jing; Saheb, Yamina

    2010-06-07

    China is now the world's largest producer and consumer of household appliances and commercial equipment. To address the growth of electricity use of the appliances, China has implemented a series of minimum energy performance standards (MEPS) for 30 appliances, and voluntary energy efficiency label for 40 products. Further, in 2005, China started a mandatory energy information label that covers 19 products to date. However, the impact of these standard and labeling programs and their savings potential has not been evaluated on a consistent basis. This research involved modeling to estimate the energy saving and CO{sub 2} emission reduction potential of the appliances standard and labeling program for products for which standards are currently in place, or under development and those proposed for development in 2010. Two scenarios that have been developed differ primarily in the pace and stringency of MEPS development. The 'Continued Improvement Scenario' (CIS) reflects the likely pace of post-2009 MEPS revisions, and the likely improvement at each revision step considering the technical limitation of the technology. The 'Best Practice Scenario' (BPS) examined the potential of an achievement of international best practice MEPS in 2014. This paper concludes that under the 'CIS' of regularly scheduled MEPS revisions to 2030, cumulative electricity consumption could be reduced by 9503 TWh, and annual CO{sub 2} emissions would be 16% lower than in the frozen efficiency scenario. Under a 'BPS' scenario for a subset of products, cumulative electricity savings would be 5450 TWh and annual CO{sub 2} emissions reduction would be 35% lower than in the frozen scenario.

  14. A comparison between customized clear and removable orthodontic appliances manufactured using RP and CNC techniques.

    Science.gov (United States)

    Martorelli, Massimo; Gerbino, Salvatore; Giudice, Michele; Ausiello, Pietro

    2013-02-01

    Aim of the research is to compare the orthodontic appliances fabricated by using rapid prototyping (RP) systems, in particular 3D printers, with those manufactured by using computer numerical control (CNC) milling machines. 3D printing is today a well-accepted technology to fabricate orthodontic aligners by using the thermoforming process, instead the potential of CNC systems in dentistry have not yet been sufficiently explored. One patient, with mal-positioned maxillary central and lateral incisors, was initially selected. In the computer aided virtual planning was defined that, for the treatment, the patient needed to wear a series of 7 removable orthodontic appliances (ROA) over a duration of 21 weeks, with one appliance for every 3 weeks. A non-contact reverse engineering (RE) structured-light 3D scanner was used to create the 3D STL model of the impression of the patient's mouth. Numerical FEM simulations were performed varying the position of applied forces (discrete and continuous forces) on the same model, simulating, in this way, 3 models with slice thickness of 0.2 mm, 0.1 mm (RP staircase effect) and without slicing (ideal case). To define the areas of application of forces, two configuration "i" and "i-1" of the treatment were overlapped. 6 patients to which for three steps (3rd, 4th and 5th step) were made to wear aligners fabricated starting from physical models by 3D printing (3DP-ROA) and afterwards, for the next steps (6th, 7th and 8th step), aligners fabricated starting from physical models by CNC milling machine (CNC-ROA), were selected. For the 6 patients wearing the CNC-ROA, it was observed a best fitting of the aligner to the teeth and a more rapid teeth movement than the 3DP-ROA (2 weeks compared to 3 weeks for every appliance). FEM simulations showed a more uniform stress distribution for CNC-ROA than 3DP-ROA. In this research, 6 different case studies and CAD-FEM simulations showed that, to fabricate an efficient clear and removable

  15. Technical analysis of refrigerators and freezers currently used in Brazil and new technologies that could increase their energetic efficiency

    Directory of Open Access Journals (Sweden)

    Mário Henrique da Fonseca Oliveira

    2016-09-01

    Full Text Available Over the last twenty years, Brazil has been going through a process of economic development, resulting in a significantly increased demand for energy. Among the appliances with the greatest impact on household electricity consumption, refrigerators and freezers account for more than 30% of consumption. Despite their considerable impact on national electricity consumption, there has been no update aimed at increasing the energy efficiency of these products since 2006. Thus, the main objective of this article is to discuss the technological concept of the refrigerators and freezers currently sold in Brazil, analyzing the feasibility of using new technologies to increase their efficiency. The results showed that the technological developments and financial conditions needed to improve the energetic efficiency of these products in the short term do exist. Thus, it is up to regulatory bodies and the federal government to promote the use of efficient solutions.

  16. Modeling of GE Appliances: Cost Benefit Study of Smart Appliances in Wholesale Energy, Frequency Regulation, and Spinning Reserve Markets

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Parker, Graham B.

    2012-12-31

    This report is the second in a series of three reports describing the potential of GE’s DR-enabled appliances to provide benefits to the utility grid. The first report described the modeling methodology used to represent the GE appliances in the GridLAB-D simulation environment and the estimated potential for peak demand reduction at various deployment levels. The third report will explore the technical capability of aggregated group actions to positively impact grid stability, including frequency and voltage regulation and spinning reserves, and the impacts on distribution feeder voltage regulation, including mitigation of fluctuations caused by high penetration of photovoltaic distributed generation. In this report, a series of analytical methods were presented to estimate the potential cost benefit of smart appliances while utilizing demand response. Previous work estimated the potential technical benefit (i.e., peak reduction) of smart appliances, while this report focuses on the monetary value of that participation. The effects on wholesale energy cost and possible additional revenue available by participating in frequency regulation and spinning reserve markets were explored.

  17. A System for Smart Home Control of Appliances based on Timer and Speech Interaction

    CERN Document Server

    Haque, S M Anamul; Islam, Md Ashraful

    2010-01-01

    The main objective of this work is to design and construct a microcomputer based system: to control electric appliances such as light, fan, heater, washing machine, motor, TV, etc. The paper discusses two major approaches to control home appliances. The first involves controlling home appliances using timer option. The second approach is to control home appliances using voice command. Moreover, it is also possible to control appliances using Graphical User Interface. The parallel port is used to transfer data from computer to the particular device to be controlled. An interface box is designed to connect the high power loads to the parallel port. This system will play an important role for the elderly and physically disable people to control their home appliances in intuitive and flexible way. We have developed a system, which is able to control eight electric appliances properly in these three modes.

  18. Correction of an adult Class II division 2 individual using fixed functional appliance: A noncompliance approach

    Directory of Open Access Journals (Sweden)

    Shrinivas Basavaraddi

    2016-01-01

    Full Text Available This case report describes the application of fixed functional appliance in the treatment of an adult female having Class II division 2 malocclusion with retroclination of upper incisors. Fixed functional appliance was used to correct the overjet after the uprighting of upper incisors. Fixed functional appliance was fitted on a rigid rectangular arch wire. Application of fixed functional appliance achieved a good Class I molar relationship along with Class I canine relationship with normal overjet and overbite. Fixed functional appliance is effective in the treatment of Class II malocclusions, even in adult patients, and can serve as an alternate choice of treatment instead of orthognathic surgery. This is a case; wherein, fixed functional appliance was successfully used to relieve deep bite and overjet that was ensued after leveling and aligning. We demonstrate that fixed functional appliance can act as a “noncompliant corrector” and use of Class II elastics can be avoided.

  19. Correction of an adult Class II division 2 individual using fixed functional appliance: A noncompliance approach.

    Science.gov (United States)

    Basavaraddi, Shrinivas; Gandedkar, Narayan H; Belludi, Anup; Patil, Anand

    2016-01-01

    This case report describes the application of fixed functional appliance in the treatment of an adult female having Class II division 2 malocclusion with retroclination of upper incisors. Fixed functional appliance was used to correct the overjet after the uprighting of upper incisors. Fixed functional appliance was fitted on a rigid rectangular arch wire. Application of fixed functional appliance achieved a good Class I molar relationship along with Class I canine relationship with normal overjet and overbite. Fixed functional appliance is effective in the treatment of Class II malocclusions, even in adult patients, and can serve as an alternate choice of treatment instead of orthognathic surgery. This is a case; wherein, fixed functional appliance was successfully used to relieve deep bite and overjet that was ensued after leveling and aligning. We demonstrate that fixed functional appliance can act as a "noncompliant corrector" and use of Class II elastics can be avoided.

  20. Estimating the impact of the home appliances trade-in policy on WEEE management in China.

    Science.gov (United States)

    Zhu, Shuguang; He, Wenzhi; Li, Guangming; Zhuang, Xuning; Huang, Juwen; Liang, Honggen; Han, Yuebin

    2012-11-01

    The ever-increasing amount of waste electric and electronic equipment (WEEE) has become a global problem. In view of the deleterious effects of WEEE on the environment and the valuable materials that can be reused in them, many countries have focused their attention on the management of WEEE and the recovery technologies of WEEE. The Chinese government has been active in creating a legislative and institutional framework to realize WEEE recycling. In June 2009, Chinese government launched home appliances and electronics trade-in implementation solution. This paper elaborates the home appliances trade-in policy and its significant impact on the WEEE management. The trade-in policy is not only conducive to expanding the consumption demand and promoting the balance of domestic and overseas demand, but also favorable to improving the energy efficiency and reducing environmental pollution. Under this policy, China has successfully established an effective WEEE recycling system, using the financial means and network design. Experiences gained from the trade-in policy have shown that management systems of WEEE need to be designed and implemented in a multi-stakeholder dialogue.

  1. EPA ENERGY STAR: Tackling Growth in Home Electronics and Small Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, Marla Christine; Brown, Richard; Homan, Gregory

    2008-11-17

    Over a decade ago, the electricity consumption associated with home electronics and other small appliances emerged onto the global energy policy landscape as one of the fastest growing residential end uses with the opportunity to deliver significant energy savings. As our knowledge of this end use matures, it is essential to step back and evaluate the degree to which energy efficiency programs have successfully realized energy savings and where savings opportunities have been missed.For the past fifteen years, we have quantified energy, utility bill, and carbon savings for US EPA?s ENERGY STAR voluntary product labeling program. In this paper, we present a unique look into the US residential program savings claimed to date for EPA?s ENERGY STAR office equipment, consumer electronics, and other small household appliances as well as EPA?s projected program savings over the next five years. We present a top-level discussion identifying program areas where EPA?s ENERGY STAR efforts have succeeded and program areas where ENERGY STAR efforts did not successfully address underlying market factors, technology issues and/or consumer behavior. We end by presenting the magnitude of ?overlooked? savings.

  2. Class II malocclusion treatment using Jasper Jumper appliance associated to intermaxillary elastics: a case report

    Directory of Open Access Journals (Sweden)

    Francyle Simões Herrera-Sanches

    2013-04-01

    Full Text Available INTRODUCTION: Skeletal, dental and profile discrepancies can be amended by using functional orthodontic appliances. OBJECTIVE: This study is a report of the treatment of a patient, 11 years and 4 months old, with Class II, division 1, malocclusion, convex profile, protrusion of upper incisors, pronounced overjet and overbite, and mild crowding. METHODS: The patient was treated with a Jasper Jumper associated to fixed appliances for 6 months and Class II intermaxillary elastics (3/16in during the last 4 months. After debonding, a Hawley retainer was used during daytime and a modified Bionator for night use during one year. In the lower dental arch a bonded lingual retainer was used. This treatment combination improved the profile, as well as the overjet, overbite and molar relation. RESULTS: There was clockwise mandibular rotation and increase of lower anterior facial height. The lower incisors were protruded and extruded and the lower molars were extruded. The centric occlusal relation was checked and it was coincident to the maximum usual intercuspation. CONCLUSION: It was demonstrated that the Jasper Jumper is an efficient alternative to Class II malocclusion treatment, providing improvement in the facial profile, although the changes are more dentoalveolar than skeletal.

  3. Social perceptions of adults wearing orthodontic appliances: a cross-sectional study.

    Science.gov (United States)

    Jeremiah, H G; Bister, D; Newton, J T

    2011-10-01

    This study ascertained the influence of orthodontic appliances on subjective ratings for social competence (SC), intellectual ability (IA), psychological adjustment (PA), and attractiveness in young adult orthodontic patients. A cross-sectional analytical questionnaire study was conducted with 130 undergraduates from the UK. Each participant was asked to look at a single, randomly assigned colour photograph of a young adult female and then asked to make judgements concerning her personal characteristics. Five modified photographs of the same young adult female were used: (1) no appliance, (2) stainless steel fixed orthodontic appliance, (3) ceramic fixed orthodontic appliance, (4) gold fixed orthodontic appliance, and (5) clear colourless aligner. Likert scales with higher scores indicating more positive ratings were used. The results were analysed using chi-square test, one-way univariate analysis of variance, and post hoc Tukey-B and Kruskal-Wallis tests. The results showed that greater perceived IA was associated with the appearance of no appliance (mean values: 7.56) rather than steel (6.67) or ceramic appliances (6.65) but similar to the gold (7.35) and aligner (7.08) appliances. No significant differences between the different orthodontic appliance appearances were found for SC and PA. A trend existed where the no appliance image (resembling a lingual appliance) or clear aligner was considered more attractive than the visible buccal fixed appliances. In the absence of other information, the judgements an individual young adult makes concerning the personal characteristics of a young adult are influenced by dental appearance and orthodontic appliance design. This may influence orthodontic appliance choice.

  4. Energy efficiency policies and measures

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This document makes a review of the energy efficiency and demand side management (DSM) policies and measures in European Union countries and Norway in 1999: institutional changes, measures and programmes, budget, taxation, existence of a national DSM programme, national budgets for DSM programmes, electricity pricing: energy/environment tax, national efficiency standards and regulation for new electrical appliances, implementation of Commission directives, efficiency requirements, labelling, fiscal and economic incentives. (J.S.)

  5. Cheek Plumper: An Innovative Anti-cheek Biting Appliance

    Science.gov (United States)

    Srivastava, Nikhil; Kaushik, Noopur; Panthri, Prerna

    2016-01-01

    ABSTRACT One of the most challenging tasks for a pediatric dentist is the management of deleterious oral habits which adversely affect the dentofacial complex. However, if these habits can be intercepted and diagnosed well in time, they can save the patient from the psychological impact of undergoing long treatment therapies. One such rare deleterious oral habit is cheek biting that affects the buccal mucosa. Presented here is a case report which describes the interception of this deleterious habit in a 15-year-old female child who was a bilateral cheek biter with the help of an innovative intraoral appliance: The cheek plumper. How to cite this article: Rana V, Srivastava N, Kaushik N, Panthri P. Cheek Plumper: An Innovative Anti-cheek Biting Appliance. Int J Clin Pediatr Dent 2016;9(2):146-148. PMID:27365937

  6. "False" migration of rigid fixation appliances in pediatric craniofacial surgery.

    Science.gov (United States)

    Papay, F A; Hardy, S; Morales, L; Walker, M; Enlow, D

    1995-07-01

    Osseous fixation techniques have been widely used to provide rigid stabilization in the craniofacial skeleton. Reported sequelae of its usage has been limited to palpation of the screw-plate system and radiological imaging artifacts. Over the past 3 years we have identified miniplates, microplates, and wire sutures on the inner cranial table of the growing child. The observation of "false" migration of these appliances has provided the impetus to review these patients in more detail. Twenty patients underwent secondary cranial remodeling within a two-year period; 7 of these patients were seen to have "false" migration. There were no untoward sequelae in removal of these appliances, and no adverse neurological symptoms were seen.

  7. CE APPROVAL IN ELECTRICAL HOUSEHOLD APPLIANCES AND A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Nazmi EKREN

    2009-01-01

    Full Text Available Due to the reason for rapidly developing technology, increasing competition medium, and awareness of the consumers, nowadays, the exigency of production with good quality has gained more and more significance. Certification of the quality and safety of the products to the consumers is compulsory in terms of producers. There are some documents to certify safety of the products. One of them is CE certificate. In this paper, basic information about CE mark is given and CE standards and tests required for electrical household appliances are mentioned. As an application, one of an electrical household appliance, toaster grill is treated and examined. To obtain CE certificate for toaster grill, required tests are made according to EN60335-2-9 and CE certificate is obtained.

  8. Evaluation of photo-activation appliances used in dentistry

    Directory of Open Access Journals (Sweden)

    Thales Ribeiro de Magalhães Filho

    2008-01-01

    Full Text Available Objective: Verify the Vickers microhardness promoted by three photo-activation appliances: one Halogen Light Ultralux (Dabi-Atlante, Ribeirão Preto, Brazil and two Light Emitting Diodes. One with a larger diode (Ultraled, Dabi-Atlante, Ribeirão Preto, Brazil and the other with seven smaller diodes (Ultraled xp, Dabi-Atlante, Ribeirão Preto, Brazil in composites with different matrixes. Methods: Three test specimens were made for each resinous materials using silicone molds measuring 4 X 8 X 30 mm. Polymerization was performedin three stages and on the two surfaces. After having been submitted to careful polishing with sequential abrasive papers and diamond paste, the Vickers microhardness of the test specimens was determined. Afterwards these values were submitted to statistical analysis by the ANOVA table and Student’s-t test. Results: The microhardness values obtained in the hybrid composite were as follows: 51.63 kg/mm2 +- 3.27; 52.22 kg/mm2 +- 3.3; 38.08 kg/mm2 +-0.31 and in the ormocer, 41.87 kg/mm2 +- 2.36; 41.5 kg/mm2 +- 1.2; 33.63 kg/mm2 +- 1.2, by the Ultralux (Dabi-Atlante, Ribeirão Preto, Brazil, Ultraled xp (Dabi-Atlante, Ribeirão Preto, Brazil and Ultraled (Dabi-Atlante, Ribeirão Preto, Brazil appliances, respectively. Conclusion: The Ultraled (Dabi-Atlante, Ribeirão Preto, Brazil and Ultraled xp (Dabi-Atlante, Ribeirão Preto, Brazil appliances promoted microhardness values that were similar between them and higher than the values produced by Ultraled (Dabi-Atlante, Ribeirão Preto, Brazil in the composites. It was verified that the intensity of the photo-activator appliances is directly related to the microhardness they produce in the composites.

  9. Evaluation of Musculoskeletal Disorders in Household Appliances Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Aioob Ghanbary

    2015-12-01

    Full Text Available Work-related musculoskeletal disorders are the most prevalent work-related disorders and injuries and being the main cause of disability. This study was conducted to assessment of the prevalence of musculoskeletal disorders in worker company household appliances production. Posture analysis was evaluated by OWAS method and prevalence of musculoskeletal disorders by Nordic questionnaire. With evaluating musculoskeletal disorders among company household appliances production can intervention action to reduce musculoskeletal disorders was carried out. This cross-sectional study was performed on 100 workers of the appliance manufacturing industry. These Individuals were included 15 persons from foam injection workshop, 17 persons from molding workshop, 17 operators of presses, 17 persons from packaging, 17 person from cutting unit and 17 operators of rivet. The Nordic questionnaire was completed by Individuals for the organs of arm, back, leg and wrist and Posture analysis was performed by OWAS method. The data were analyzed using Spss software version 18 and descriptive statistics and Anova test. Nordic questionnaire results revealed that highest disorders were observed in the arm (25%, back (22% and leg (21%. Also Anova test showed that was observed a significant correlation respectively between age and work experience with the prevalence of musculoskeletal disorders (p<0.02 (p<0.01. The results showed based on the level of risk OWAS for each job respectively, the highest level of risk associated with foam injection unit, packaging and cutting unit (risk level 4 and the lowest level of risk associated with molding workshop unit (risk level 2.The results of this study showed that household appliances Manufacturing workers due to the nature of their jobs are at risk of musculoskeletal disorders and Ergonomic interventions to do such as workstation redesign, reduced working hours, cycle of rest-work development.

  10. Progress toward Producing Demand-Response-Ready Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Sastry, Chellury

    2009-12-01

    This report summarizes several historical and ongoing efforts to make small electrical demand-side devices like home appliances more responsive to the dynamic needs of electric power grids. Whereas the utility community often reserves the word demand response for infrequent 2 to 6 hour curtailments that reduce total electrical system peak load, other beneficial responses and ancillary services that may be provided by responsive electrical demand are of interest. Historically, demand responses from the demand side have been obtained by applying external, retrofitted, controlled switches to existing electrical demand. This report is directed instead toward those manufactured products, including appliances, that are able to provide demand responses as soon as they are purchased and that require few, or no, after-market modifications to make them responsive to needs of power grids. Efforts to be summarized include Open Automated Demand Response, the Association of Home Appliance Manufacturer standard CHA 1, a simple interface being developed by the U-SNAP Alliance, various emerging autonomous responses, and the recent PinBus interface that was developed at Pacific Northwest National Laboratory.

  11. Long-term sterility of orthodontic-surgical appliances.

    Science.gov (United States)

    Brusca, María I; Nastri, Natalia; Mosca, Christian O; Nastri, María L; Rosa, Alcira C

    2004-01-01

    The aim of this study was to evaluate the long-term sterility of new dental appliances according to the non rigid wrapping employed and assess the effectiveness of sterilization in a steam autoclave at 134 degrees for 20 minutes using physical, chemical, and biological indicators. All the experimental (E) samples and the control samples (C) were assigned to one of three groups according to the type of packaging: paper bag (E1), paper/plastic pouch (E2), nylon tubing bag (E3). Each bag contained standardized orthodontic wires and brackets and sterility indicators. The samples were evaluated at the following experimental times: immediately, and 6, 12, 24 and 30 months post-sterilization. The samples were analyzed under aerobic and anaerobic conditions in keeping with the protocol currently in use at the Department of Microbiology, School of Dentistry, University of Buenos Aires. The group of control, non-sterilized samples (C1, C2, C3) were analyzed prior to the onset of the study, and were found to be contaminated. None of the sterilized samples in any of the three experimental groups evidenced contamination at any of the experimental times. The results showed that, under the present conditions, the packages and orthodontic appliances remained sterile for 30 months. These results show the importance of controlling sterility and the storage conditions over time for all the orthodontic/surgical appliances used in invasive treatments.

  12. Evaluation of safety management in an Appliances manufacturing company

    Directory of Open Access Journals (Sweden)

    F. Golbabaei

    2015-01-01

    Full Text Available Introduction: Prevention of accidents and work related diseases, are not allowed regardless of the safety of employees, customers, contractors and other persons. Assessment of individual safety management activities could reduce many losses. Present study aimed to evaluate the safety management of a household appliance manufacturing company.  .Material and Method: This study has done in a household appliance manufacturing company in Damavand city. Two questionnaires were firstly designed based on the weighted scores. The questionnaire 1 consisted of 4 indicators: Safety of machinery, Electrical safety, Risk assessment and Fire safety. Questionnaire 2 consisted of 11 sub indicators. Both questionnaires were completed by 30 HSE experts and supervisors. Reliability of questionnaires was based on cronbachs alpha coefficient. the safety status of each unit was determined and scored using information acquired by the questionnaires. Lastly, the safety of the entire company was determined.  .Result: Results showed that in safety management: the pressing and store house were in a good range of 66.66 and 60.12 points. Powder painting, enameling, laboratory were in a average range of 56.25, 55.92 and 54.15 points. Assembling and door storage were in a week range of 46.06 points.  .Conclusion: The findings showed that the safety status in the studied appliances company is in average range with 55.45 points. Therefore, it is recommended that the safety indicators should be improved for the betterment of the safety management in the company.

  13. Laboratory Testing of Demand-Response Enabled Household Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Sparn, B.; Jin, X.; Earle, L.

    2013-10-01

    With the advent of the Advanced Metering Infrastructure (AMI) systems capable of two-way communications between the utility's grid and the building, there has been significant effort in the Automated Home Energy Management (AHEM) industry to develop capabilities that allow residential building systems to respond to utility demand events by temporarily reducing their electricity usage. Major appliance manufacturers are following suit by developing Home Area Network (HAN)-tied appliance suites that can take signals from the home's 'smart meter,' a.k.a. AMI meter, and adjust their run cycles accordingly. There are numerous strategies that can be employed by household appliances to respond to demand-side management opportunities, and they could result in substantial reductions in electricity bills for the residents depending on the pricing structures used by the utilities to incent these types of responses.The first step to quantifying these end effects is to test these systems and their responses in simulated demand-response (DR) conditions while monitoring energy use and overall system performance.

  14. Laboratory Testing of Demand-Response Enabled Household Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Sparn, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jin, X. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Earle, L. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-10-01

    With the advent of the Advanced Metering Infrastructure (AMI) systems capable of two-way communications between the utility's grid and the building, there has been significant effort in the Automated Home Energy Management (AHEM) industry to develop capabilities that allow residential building systems to respond to utility demand events by temporarily reducing their electricity usage. Major appliance manufacturers are following suit by developing Home Area Network (HAN)-tied appliance suites that can take signals from the home's 'smart meter,' a.k.a. AMI meter, and adjust their run cycles accordingly. There are numerous strategies that can be employed by household appliances to respond to demand-side management opportunities, and they could result in substantial reductions in electricity bills for the residents depending on the pricing structures used by the utilities to incent these types of responses. The first step to quantifying these end effects is to test these systems and their responses in simulated demand-response (DR) conditions while monitoring energy use and overall system performance.

  15. Federal Lands

    Data.gov (United States)

    Department of Homeland Security — This map layer consists of federally owned or administered lands of theUnited States, Puerto Rico, and the U.S. Virgin Islands. Only areas of 640 acres or more are...

  16. Intelligent Control of Home Appliances via Network

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana

    This thesis addresses selected topics of energy management in home environments and ICT for the Smart Grid. However, those two topics are vast and only a few aspects of them have been discussed. This thesis focuses on providing a home energy management solution based on a technology independent......, in addition to providing energy management strategies to reduce electricity consumption. Reducing energy consumption in home environments has become crucial to meet the "20-20-20" targets set by European Commission Climate Action. However, reducing energy in home environments is not sufficient. The power grid...... has to be upgraded and improved into the Smart Grid. The Smart Grid will enable the power grid with new functionalities that will reduce power consumption, efficiently distribute energy and make a more robust and resilient power grid. Among the Smart Grid functionalities, there is Advanced Metering...

  17. 78 FR 44036 - Appliance Standards and Rulemaking Federal Advisory Committee: Notice of Intent To Establish the...

    Science.gov (United States)

    2013-07-23

    ... the opportunity to attend meetings of the full committee and speak or otherwise address the committee... technical matter(s) being studied. Because it recognizes the importance of this support work for the working... skills, and sufficient technical knowledge to participate in substantive negotiations. Certain concepts...

  18. 78 FR 27866 - Appliance Standards and Rulemaking Federal Advisory Committee: Notice of Open Meeting for the...

    Science.gov (United States)

    2013-05-13

    ..., and provide docket number EERE-2013-BT-NOC-0023. Comments may be submitted using any of the following... comments. 2. Email: ASRACworkgroup2013NOC0023@ee.doe.gov . Include docket number EERE-2013-BT-NOC-0023...

  19. 77 FR 14008 - Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC)

    Science.gov (United States)

    2012-03-08

    ... the Administrative Procedure Act (APA). This notice also requests nominations for members on the..., biography, and any letters of support must be submitted in electronic format via email to asrac@ee.doe.gov...

  20. Functional orthopedic magnetic appliance (FOMA) II--modus operandi.

    Science.gov (United States)

    Vardimon, A D; Stutzmann, J J; Graber, T M; Voss, L R; Petrovic, A G

    1989-05-01

    A new functional appliance (FA) to correct Class II dentoskeletal malocclusions is introduced. The functional orthopedic magnetic appliance (FOMA) II uses upper and lower attracting magnetic means (Nd2Fe14B) to constrain the lower jaw in an advanced sagittal posture. In vitro, a special gauge transducer measured the magnetic attractive path and forces. In vivo, 13 prepubertal female Macaca fascicularis monkeys received facial implants and were treated for 4 months with the following appliances: conventional FA (four subjects), FOMA II (five subjects), a combined FOMA II + FA (two subjects), and sham (control) appliance (two subjects). The in vitro results showed the following: vertico-sagitally displaced upper and lower magnets attracted ultimately along an oblique line with a terminal horizonal slide to become fully superimposed; the functional performance improved when the magnetic interface acted as a magnetic inclined plane; and the magnetic force was able to guide and constrain the mandible toward the constructive protrusive closure position (CPCP) (1.2 mm, F = 570 gm) from levels below the habitual rest position (3 mm, F = 219 gm) and the electromyographic (EMG) relaxed position (8.5 mm, F = 45 gm). The in vivo results demonstrated the following: functional performance increased in FOMA II (22%) and in the combined FOMA II + FA (28%) over the conventional FA; mandibular length increased significantly in the treated animals (means = 2.83 +/- 0.70 mm) over the control animals (means = 0.43 +/- 0.08 mm); incisor proclination was lower in magnetic appliances (means = 4.57 +/- 1.76 degrees) than in the conventional FA (means = 8.75 +/- 1.85 degrees); mandibular elongation and condylar posterior inclination resulted from posterosuperior endochondral growth (increased cell proliferation and/or hyperplasia of functional chondroblasts) and by bony remodeling of the condylar neck (apposition posterior border, resorption anterior border), respectively; virtually no

  1. Pacific Northwest GridWise™ Testbed Demonstration Projects; Part II. Grid Friendly™ Appliance Project

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Brous, Jerry; Chassin, David P.; Horst, Gale R.; Kajfasz, Robert; Michie, Preston; Oliver, Terry V.; Carlon, Teresa A.; Eustis, Conrad; Jarvegren, Olof M.; Marek, W.; Munson, Ryan L.; Pratt, Robert G.

    2007-10-01

    Fifty residential electric water heaters and 150 new residential clothes dryers were modified to respond to signals received from underfrequency, load-shedding appliance controllers. Each controller monitored the power-grid voltage signal and requested that electrical load be shed by its appliance whenever electric power-grid frequency fell below 59.95 Hz. The controllers and their appliances were installed and monitored for more than a year at residential sites at three locations in Washington and Oregon. The controllers and their appliances responded reliably to each shallow underfrequency event—an average of one event per day—and shed their loads for the durations of these events. Appliance owners reported that the appliance responses were unnoticed and caused little or no inconvenience for the homes’ occupants.

  2. Performance Assessment of Chemical Coagulation Together with Advanced Oxidation Peroxone Regarding Dye Wastewater Treatment of Appliance Factories

    Directory of Open Access Journals (Sweden)

    A R Shahriyari Farfani

    2016-01-01

    Full Text Available Abstract Introduction: Considering the important role of industry in polluting the environment, the present study aimed to evaluate the performance of chemical coagulation together with advanced oxidation (peroxone regarding dye wastewater treatment of appliance factories. Methods: This study was experimental, which it’s pilot-scale was conducted on the wastewater of the painting appliance Factory. The sample was selected via the combined sampling procedure. The processes used in the present study consisted of chemical coagulation and advanced oxidation (peroxone processes and 250 samples were analyzed. MgCl2, PAC and FeCl3, Bentonite, Cationic Polymer were used for chemical coagulation. The used equipments consisted of Spectrophotometer DR 2000, Jar taste and a ozonation reactor. COD and dye of samples were measured according to standard method. Results: The results revealed that each of the coagulants in its optimal pH were able to arrange the magnesium chloride 86.85%, poly aluminum chloride 88.47% and ferric chloride 85.41% in removal of COD. Poly aluminum chloride achieved the highest dye removal 90.92%. Furthermore, the highest COD removal efficiency was related to the combination of magnesium chloride (1.4 mg/l, poly aluminum chloride (0.6 mg/l and cationic polymers (0.4 mg/l with an efficiency of 89.11%, which managed to remove the dye up to 93.38%. COD removal efficiency reached to 99.67% using advanced oxidation process by peroxone method on pretreated wastewater (with chemical coagulation. Conclusions: For better performance of peroxone treatment, the wastewater should be pretreated for removal of dissolved solids. As a result, due to its suspension status of using peroxone method together chemical coagulation has a high capability to remove COD and dye from appliance Factore ,s wastewater.

  3. The impact of personality on adult patients' adjustability to orthodontic appliances.

    Science.gov (United States)

    Cooper-Kazaz, Rena; Ivgi, Inbal; Canetti, Laura; Bachar, Eytan; Tsur, Boaz; Chaushu, Stella; Shalish, Miriam

    2013-01-01

    To evaluate the impact of psychological traits on patients' choice of orthodontic appliances and their adjustability to orthodontic treatment. The sample consisted of 68 adult patients divided into three groups (28 buccal, 19 lingual, and 21 clear aligners). Prior to treatment participants filled out the Brief Symptom Inventory to assess symptoms of mental distress and the Narcissistic Vulnerability Scale to assess narcissistic personality traits. During the first week after appliance delivery and on day 14, patients completed a Health-Related Quality of Life questionnaire to assess their perception of pain and four areas of dysfunction. The correlation between personality traits and patients' reaction to treatment was evaluated. Somatization was the only trait that affected the choice of lingual and clear aligner appliance. Reduced self-esteem regulation was associated with increased pain in all patients, while exploitation was associated with pain in lingual patients. Narcissistic vulnerability slightly influenced patients' adaptability to orthodontic appliances. Although adjustability to lingual appliances was the most difficult, only two parameters were affected by personality features. In the buccal group, adjustability was affected by numerous parameters. Adaptation to the clear aligner appliance was relatively uneventful and least affected by psychological features. Anxious individuals tend to prefer lingual and clear aligner appliances. The selection of lingual and clear aligner appliances governs the patient's response and recovery process, leaving little room for the effect of psychological features. On the other hand, the buccal appliance allows for greater impact of personality traits on adjustability.

  4. Management of severe Class II malocclusion with sequential modified twin block and fixed orthodontic appliances

    Directory of Open Access Journals (Sweden)

    Sonal Chowdhary

    2016-01-01

    Full Text Available Functional appliance is an effective way of treating skeletal Class II malocclusion in children and adolescents. A 12 months stepwise mandibular advancement protocol with Herbst appliance has been proved to enhance condylar growth and improve mandibular prognathism. The present case report documents a 12-year-old boy presenting with Angle's Class II, division 1 malocclusion associated with excessive overjet (11 mm, 100% deep bite, and retrognathic mandible. He was treated by a phase I growth modification therapy using twin block appliance with lip pads in a stepwise mandibular advancement protocol followed by a phase II preadjusted Edgewise appliance therapy.

  5. CONSIDERATION UNDER THE SURVEY ON ATTITUDES AMONG USERS TOWARD RECYCLING IN USED COMPACT APPLIANCES

    Science.gov (United States)

    Wada, Nariaki; Nakano, Kazuko

    In this paper, we consider establishment of recycling system under the result of questionary investigation about 10 items of used compact appliances. On gender basis, they have different comprehension about compact appliances recycling system, but make out the importance of it. By age bracket, young people have positive attitudes toward recycling, and great difference of burden charges for compact appliances disposal was seen; they are 1,522 yen in old generations, 1,531 yen in middle age generations, and 560 yen in young generations. This indicates that the recovery in their own backyard with the respect of age compositions at the area is needed for establishment of compact appliances recycling system.

  6. Early treatment of Class III malocclusion by RME and modified Tandem appliance.

    Science.gov (United States)

    Ansar, Juhi; Maheshwari, Sandhya; Verma, Sanjeev Kumar; Singh, Raj Kumar

    2015-01-01

    Patients with a skeletal Class III malocclusion and maxillary deficiency can be treated successfully using a combined protraction facemask and alternate rapid maxillary expansions and contractions (Alt-RAMEC). However, due to poor patient compliance during facemask therapy there has been growing interest in intraoral appliances for correcting Class III malocclusion. The tandem traction bow appliance (TTBA) is an intraoral appliance which has been used successfully for the treatment of growing Class III patients. This case report describes the management of a 10-year-old boy with a Class III malocclusion and maxillary deficiency treated with modified TTBA appliance.

  7. Fiscal Federalism

    DEFF Research Database (Denmark)

    Feng, Xingyuan; Ljungwall, Christer; Guo, Sujian

    2013-01-01

    in the Western literature? Second, are there any problems with existing principles of fiscal federalism and, if so, how to refine them? Third, how are refined principles relevant to the Chinese case and what policies should the Chinese government pursue in the future? Based on an in-depth and critical review...... relations is not without controversy. This paper aims to make a theoretical contribution to the ongoing debate on ‘fiscal federalism’ by addressing crucial questions regarding China's central–local fiscal relations: first, to what extent do Chinese central–local fiscal relations conform to fiscal federalism...

  8. PingFederate

    Data.gov (United States)

    US Agency for International Development — PingFederate Server provides Identity Federation and Single Sign On Capabilities. Federated identity management (or identity federation) enables enterprises to...

  9. Evaluation of Waste Heat Recovery and Utilization from Residential Appliances and Fixtures

    Energy Technology Data Exchange (ETDEWEB)

    Tomlinson, John J [ORNL; Christian, Jeff [Oak Ridge National Laboratory (ORNL); Gehl, Anthony C [ORNL

    2012-09-01

    Executive Summary In every home irrespective of its size, location, age, or efficiency, heat in the form of drainwater or dryer exhaust is wasted. Although from a waste stream, this energy has the potential for being captured, possibly stored, and then reused for preheating hot water or air thereby saving operating costs to the homeowner. In applications such as a shower and possibly a dryer, waste heat is produced at the same time as energy is used, so that a heat exchanger to capture the waste energy and return it to the supply is all that is needed. In other applications such as capturing the energy in drainwater from a tub, dishwasher, or washing machine, the availability of waste heat might not coincide with an immediate use for energy, and consequently a heat exchanger system with heat storage capacity (i.e. a regenerator) would be necessary. This study describes a two-house experimental evaluation of a system designed to capture waste heat from the shower, dishwasher clothes washer and dryer, and to use this waste heat to offset some of the hot water energy needs of the house. Although each house was unoccupied, they were fitted with equipment that would completely simulate the heat loads and behavior of human occupants including operating the appliances and fixtures on a demand schedule identical to Building American protocol (Hendron, 2009). The heat recovery system combined (1) a gravity-film heat exchanger (GFX) installed in a vertical section of drainline, (2) a heat exchanger for capturing dryer exhaust heat, (3) a preheat tank for storing the captured heat, and (4) a small recirculation pump and controls, so that the system could be operated anytime that waste heat from the shower, dishwasher, clothes washer and dryer, and in any combination was produced. The study found capturing energy from the dishwasher and clothes washer to be a challenge since those two appliances dump waste water over a short time interval. Controls based on the status of the

  10. Evaluation of Waste Heat Recovery and Utilization from Residential Appliances and Fixtures

    Energy Technology Data Exchange (ETDEWEB)

    Tomlinson, John J [ORNL; Christian, Jeff [Oak Ridge National Laboratory (ORNL); Gehl, Anthony C [ORNL

    2012-09-01

    Executive Summary In every home irrespective of its size, location, age, or efficiency, heat in the form of drainwater or dryer exhaust is wasted. Although from a waste stream, this energy has the potential for being captured, possibly stored, and then reused for preheating hot water or air thereby saving operating costs to the homeowner. In applications such as a shower and possibly a dryer, waste heat is produced at the same time as energy is used, so that a heat exchanger to capture the waste energy and return it to the supply is all that is needed. In other applications such as capturing the energy in drainwater from a tub, dishwasher, or washing machine, the availability of waste heat might not coincide with an immediate use for energy, and consequently a heat exchanger system with heat storage capacity (i.e. a regenerator) would be necessary. This study describes a two-house experimental evaluation of a system designed to capture waste heat from the shower, dishwasher clothes washer and dryer, and to use this waste heat to offset some of the hot water energy needs of the house. Although each house was unoccupied, they were fitted with equipment that would completely simulate the heat loads and behavior of human occupants including operating the appliances and fixtures on a demand schedule identical to Building American protocol (Hendron, 2009). The heat recovery system combined (1) a gravity-film heat exchanger (GFX) installed in a vertical section of drainline, (2) a heat exchanger for capturing dryer exhaust heat, (3) a preheat tank for storing the captured heat, and (4) a small recirculation pump and controls, so that the system could be operated anytime that waste heat from the shower, dishwasher, clothes washer and dryer, and in any combination was produced. The study found capturing energy from the dishwasher and clothes washer to be a challenge since those two appliances dump waste water over a short time interval. Controls based on the status of the

  11. Patients' adherence to hard acrylic interocclusal appliance treatment in general dental practice in Sweden.

    Science.gov (United States)

    Lindfors, Erik; Helkimo, Martti; Magnusson, Tomas

    2011-01-01

    The aims of the present study were to investigate patient adherence to treatment with hard acrylic interocclusal appliance in general dentistry in Sweden and to see if some general factors could predict patient adherence or non-adherence. During the period January - May 2009 a postal questionnaire was sent to all adult patients (> or = 20 years of age) that had received a hard acrylic interocclusal appliance from the public dental health service in the County of Uppsala during 2007 (n=388). The same questionnaire was also sent to all adult patients that had received a hard acrylic interocclusal appliance at a specialist clinic during the same year (n=69). The response rate in general dental practice was 71% and at the specialist clinic the response rate was 91%. In general dental practice, 97% of the hard acrylic interocclusal appliances were stabilisation appliances. At the specialist clinic other types of interocclusal appliances was used to a greater extent. A vast majority of patients in both general dental practice and at the specialist clinic experienced that the interocclusal appliance had a positive treatment effect. In general dental practice, 73% of the patients still used their interocclusal appliances 1 1/2-2 years after they had received them. The corresponding figure at the specialist clinic was 54%. The main reasons for not using the interocclusal appliance, besides disappearance/reduction of TMD symptoms, were different kinds of comfort problems. From the results of this study it is concluded that the patient adherence to hard acrylic stabilisation appliances made in general dental practice in Sweden is good. It can also be concluded that a perceived good treatment effect, as well as treatment of more long-term conditions, predicted a better patient adherence to hard acrylic stabilisation appliances. More studies concerning factors affecting patient adherence in TMD therapy are warranted.

  12. The semiotics of smart appliances and pervasive computing

    DEFF Research Database (Denmark)

    Andersen, Peter Bøgh; Brynskov, Martin

    2007-01-01

    This paper presents Digital Habitats, a conceptual and methodological framework for analyzing and designing smart appliances in the context of pervasive computing. The concrete topic is a project in pervasive gaming for children. The paper is semiotic in two senses: on the one hand, it is based...... on the linguistic theory of semantic roles; on the other hand, it focuses on signs, their referents, and their mode of signifying. After an introductory discussion of smart technology and networks of stupidity, we present our framework which consists of a set of theoretical concepts supplemented by diagrams...

  13. Mechanical appliances, mechanical movements and novelties of construction

    CERN Document Server

    Hiscox, Gardner D

    2008-01-01

    From the devices that power ships and trains to the workings of clocks, typewriters, and guns, this engrossing visual narrative profiles the specific and unique properties of hundreds of mechanical devices. Nearly 1,000 detailed illustrations depict steam-powered appliances, spring-powered devices, hydraulic equipment, and other machines, many of which remain in common use today. Each apparatus features a detailed line drawing and an informative explanation of its workings and uses. A final chapter chronicles 400 years of impassioned but futile searching for a perpetual motion machine.The comp

  14. Modified distal shoe appliance--fabrication and clinical performance.

    Science.gov (United States)

    Gujjar, Kumar Raghav; Indushekar, K R; Amith, H V; Sharma, Shefali Li

    2012-01-01

    When the primary second molar is prematurely lost, mesial movement and migration of the permanent first molar often occurs. This is one of the most difficult problems of the developing dentition confronted by pediatric dentists. Use of a space maintainer that will guide the permanent first molar into its normal position is indicated. In cases with bilateral premature loss of primary molars, the conventional design of distal shoe poses a variety of problems and, therefore, necessitates a customized design for the eruption guidance of permanent first molars. The purpose of this case report is to discuss an innovative design of a distal shoe appliance, which was used with good clinical results.

  15. Surgical and orthodontic considerations for distraction osteogenesis with ROD appliances.

    Science.gov (United States)

    Dessner, S; Razdolsky, Y; el-Bialy, T

    2001-03-01

    Tooth-borne/hybrid distraction devices offer a new approach for intraoral DO and better control of the distracted bony segments. These appliances also offer a unique characteristic by using the teeth as reference points for obtaining parallelism of the distraction devices to each other and to the vector of distraction in bilateral cases. More studies may be needed for long-term evaluation of the obtained results with intraoral distraction devices as well as biomechanical analysis of stress distribution throughout the mandible after distraction.

  16. REACH Basics for Chinese Producers of Electric Household Appliances

    Institute of Scientific and Technical Information of China (English)

    Dr.Klaus W.Mehl

    2008-01-01

    The following article explains the EU chemical regulation "REACH', explicates the requirements that Chinese producers are facing, and shows how they can fulfill the requirements and secure their access to the EU market. The consequences of failing to fulfill REACH requirements are given in REACH Article 5: No data, no market: ... substances ... in articles ... shall not be ... placed on the market unless they have been registered In other words: Without registration of chemicals Chinese producers of electric household appliances may loose their EU market.

  17. Simplified feeding appliance for an infant with cleft palate

    Directory of Open Access Journals (Sweden)

    Shaila Masih

    2014-01-01

    Full Text Available A child born with cleft palate may experience difficulties while feeding. Early surgical treatment may need to be postponed until certain age and weight gain of the infant. The case presented here is of a 1-month-old neonate born with cleft palate, assisted with a new feeding appliance made with ethylene vinyl acetate using pressure molding technique to aid in proper feeding. The patient′s weight and health significantly improved after the insertion of obturator. The advantages of this material included being lightweight, moldability, good palatal fit and decreased soft tissue injury.

  18. Creeping Federalization

    DEFF Research Database (Denmark)

    Sweeney, Richard J.

    2003-01-01

    that make taxharmonization difficult to impose. Other types of harmonization have a less clear-cut costbenefitanalysis. A federal commercial code that is uniform across member states reducestransaction and information costs, compared to leaving important code issues to memberstates; further, many states may...

  19. Optical materials technology for energy efficiency and solar energy conversion VII; Proceedings of the Meeting, Hamburg, Federal Republic of Germany, Sept. 19-21, 1988

    Science.gov (United States)

    Granqvist, Claes G.; Lampert, Carl M.

    Various papers on optical materials technology for energy efficiency and solar energy conversion are presented. Individual topics addressed include: nonlinear optical effects in organic molecules and polymers, optical and electrical properties of amorphous Li(x)WO3 films, electrochromism in sputtered vanadium pentoxide, characterization of nickel oxide electrochromic films, radiative cooling with pigmented polyethylene foils, plasma-film interactions in RF sputtered a-Si:H and a-Ge:H, metal oxyfluoride coatings for energy-efficient windows, fatigue-resistant photochromic plastics, evaporated VO(x) thin films, electrochromism in nickel oxide films, system design for high-rate deposition of indium oxide solar coatings, performance and bandwidth analysis of holographic solar reflectors, laser and spectroscopic characterization of thin films, high-efficiency collectors for solar energy applications, influence of surface roughness on the optical properties of cermet coatings, and sputtered aluminum composite selective absorbing surfaces.

  20. Assessment of potential energy efficiency improvements in the traction sector of the Swiss Federal Railways; Potentialermittlung Energieeffizienz Traktion bei den SBB - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, M.; Menth, S.; Lerjen, M.

    2007-07-01

    Possibilities to reduce the consumption of 16.7-Hz traction energy of Swiss Federal Railways (SBB) have been investigated. Various proposals have been discussed together with experts of SBB's Passenger, Cargo and Infrastructure divisions. Based on numerical simulations for representative train runs, the total consumption of the SBB network could be calculated and compared with real values. The possible reduction e.g. by energy optimised driving could be derived from this comparison; it is between 3 and 5 % of the specific consumption both for the influence by train driver and by traffic control. Technical measures in traction units and passenger coaches lead to reductions of up to about 3%, depending on the vehicle type. It is important that all measures take into account the extremely dense traffic on SBB's network and do not reduce the attractiveness for the customers. (author)

  1. Annual Report 2003. Research programme 'Electricity' of the Swiss Federal Office of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Brueniger, R.

    2004-07-01

    This report for the Swiss Federal Office of Energy (SFOE) summarises the work done in 2003 in the various research areas covered by the Swiss Electricity Research programme. Work done in the programme's five main areas - electricity transport and storage, high-temperature superconductivity, energy and information technologies, drives and electric motors, and appliances is reviewed. In the electricity transport and storage area an agreement with the Swiss Association of Electricity Producers (VSE) on the transfer of findings was made and the focus of work was set on decentralised systems. Also, the use of compressed-air storage systems was looked at and the AC corrosion of pipelines was examined. Swiss participation in an IEA Implementing Agreement for a Co-operative Programme for Assessing the Impact of High-Temperature Superconductivity on the Electric Power Sector is mentioned, as is the market potential of superconductive current limiters. A total of 8 institutions and industries are involved in theoretical or practical research in the area of high-temperature superconductors. Information and communications technologies are reviewed, including work on energy-efficient EDP server management. Work in other areas summarised includes lighting and uninterruptible power-supplies and work on the energy consumption of process control units. In the electrical drives area, work is summarised in various areas ranging from an industry agreement on the energy-efficiency of motors through to the optimisation of compressed-air systems and energy-efficient gearless drives. Efficient hotel minibars, the energy-efficiency potential in the area of water dispensers and the energy-efficiency potential of hot beverage dispensers used in the area of staff catering and the standby consumption of household appliances are just a few of the topics dealt with. Co-operation with Swiss institutions and international organisations such as the IEA is reviewed. Implementation work in the

  2. Developing a New Appliance to Dissipate Mechanical Load on Teeth and Improve Limitation of Vertical Mouth Opening

    Directory of Open Access Journals (Sweden)

    Takashi Satomi

    2013-10-01

    Full Text Available Objectives: The principle of leverage to superpose the convex surfaces of two shells was applied to develop a device for treating limitation of mouth opening and called it the “shell-shaped mouth opener” and analyzed pressure on the teeth with the TheraBite® appliance and the shell-shaped mouth opening appliance. Material and Methods: To compare the TheraBite® appliance and the shell-shaped mouth opening appliance, pressure on the teeth in the dentition model with both devices was analyzed using the Inastomer® flexible conductive sensor. Results: The load was better dispersed to each tooth in the shell-shaped mouth opening appliance in the all quadrants compared to the TheraBite® appliance. Conclusions: The present study revealed that the shell-shaped mouth opening appliance which was originally invented in our lab, dissipated the mechanical load on teeth more evenly than the TheraBite® appliance.

  3. Created in Close Interaction with the Industry: The Smart Appliances REFerence (SAREF) Ontology

    NARCIS (Netherlands)

    Daniele, L.M.; Hartog, F.T.H. den; Roes, J.B.M.

    2015-01-01

    Around two thirds of the energy consumed by buildings can be traced back to the residential sectors and thus household appliances. Today, most appliances are highly intelligent and networked devices, in principle being able to form complete energy consuming, producing, and managing systems. Reducing

  4. Regulating electricity demand peaks for home appliances using reversible fair scheduling

    DEFF Research Database (Denmark)

    Kardaras, Georgios; Rossello Busquet, Ana; Iversen, Villy Bæk

    2010-01-01

    of home appliances into priority classes and the definition of a maximum power consumption threshold which is not allowed to be exceeded during peak hours. According to the bandwidth demand and priority of each class, the reversible fair scheduling algorithm delays some of the appliances and prolongs...

  5. Poster Abstract: A Practical Model for Human-Smart Appliances Interaction

    DEFF Research Database (Denmark)

    Fürst, Jonathan; Fruergaard, Andreas; Johannesen, Marco Høvinghof

    2016-01-01

    interaction with smart appliances. Two issues stand out: (1) How to impose logical locality when interacting with a smart appliance? (2) How to mediate conflicts between several persons in a room, or between building-wide policies and user preferences? We approach both problems by defining a general model...

  6. 78 FR 7394 - Notification of Proposed Production Activity; GE Appliances; Subzone 29C (Electric Water Heaters...

    Science.gov (United States)

    2013-02-01

    ... Foreign-Trade Zones Board Notification of Proposed Production Activity; GE Appliances; Subzone 29C (Electric Water Heaters), Louisville, KY GE Appliances, operator of Subzone 29C, submitted a notification of proposed production activity for its facility in Louisville, Kentucky. The notification conforming to the...

  7. 46 CFR 160.031-4 - Equipment for shoulder gun type line-throwing appliance.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Equipment for shoulder gun type line-throwing appliance... Appliance, Shoulder Gun Type (and Equipment) § 160.031-4 Equipment for shoulder gun type line-throwing... the gun. The line canister shall be secured by clamps or brackets below the barrel of the gun. (c) One...

  8. What to Do If Your Appliances Are Wet After a Disaster

    Centers for Disease Control (CDC) Podcasts

    2006-08-10

    If your home was flooded, look for signs that your appliances have gotten wet. Throw away wet or flooded appliances to protect from shock and fire.  Created: 8/10/2006 by Emergency Communications System.   Date Released: 7/30/2008.

  9. Toward semantic interoperability of energy using and producing appliances in residential environments

    NARCIS (Netherlands)

    Hartog, F.T.H. den; Daniele, L.M.; Roes, J.B.M.

    2015-01-01

    About two thirds of the energy consumed in buildings originates household appliances. Nowadays, appliances are often intelligent and networked devices that form complete energy consuming, producing, and managing systems. Reducing energy is therefore a matter of managing and optimizing the energy uti

  10. Created in Close Interaction with the Industry: The Smart Appliances REFerence (SAREF) Ontology

    NARCIS (Netherlands)

    Daniele, L.M.; Hartog, F.T.H. den; Roes, J.B.M.

    2015-01-01

    Around two thirds of the energy consumed by buildings can be traced back to the residential sectors and thus household appliances. Today, most appliances are highly intelligent and networked devices, in principle being able to form complete energy consuming, producing, and managing systems. Reducing

  11. Study on Semantic Assets for Smart Appliances Interoperability : D-S4: FINAL REPORT

    NARCIS (Netherlands)

    Daniele, L.M.; Hartog, F.T.H. den; Roes, J.B.M.

    2015-01-01

    About two thirds of the energy consumed in buildings originates from household appliances. Nowadays, appliances are often intelligent and networked devices that form complete energy consuming, producing, and managing systems. Reducing energy consumption is therefore a matter of managing and optimizi

  12. 77 FR 61396 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Countervailing...

    Science.gov (United States)

    2012-10-09

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of...'') is conducting an administrative review of the countervailing duty order on certain kitchen appliance shelving and racks (``kitchen racks'') from the People's Republic of China (``PRC''). The period of...

  13. 77 FR 12811 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Partial...

    Science.gov (United States)

    2012-03-02

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... notice of initiation of an administrative review of the antidumping duty order on certain kitchen... Duty Order--Kitchen Appliance Shelving and Racks from the People's Republic of China, dated January...

  14. 78 FR 63166 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Countervailing...

    Science.gov (United States)

    2013-10-23

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... conducting an administrative review of the countervailing duty order on certain kitchen appliance shelving and racks (kitchen racks) from the People's Republic of China (PRC). The period of review (POR)...

  15. The Pacific Northwest residential consumer: Perceptions and preferences of home heating fuels, major appliances, and appliance fuels

    Energy Technology Data Exchange (ETDEWEB)

    Harkreader, S.A.; Hattrup, M.P.

    1988-09-01

    In 1983 the Bonneville Power Administration contracted with the Pacific Northwest Laboratory (PNL) to conduct an analysis of the marketing environment for Bonneville's conservation activities. Since this baseline residential study, PNL has conducted two follow up market research projects: Phase 2 in 1985, and Phase 3, in 1988. In this report the respondents' perceptions, preferences, and fuel switching possibilities of fuels for home heating and major appliances are examined. To aid in effective target marketing, the report identifies market segments according to consumers' demographics, life-cycle, attitudes, and opinions.

  16. Orchestrating utility supply and demand in real-time via the Internet, home networks, and smart appliances

    Energy Technology Data Exchange (ETDEWEB)

    Cruickshank, R.F. III [Power Networks, Big Indian, NY (United States)

    2008-07-01

    This paper presented a model to illustrate the efficient coordination between the supply-side and demand-side of household electricity use and the magnitude of demand that can be managed using real-time pricing. In real-time supply and demand side management, a variable price for service is sent via Internet from the supply-side to the demand-side. The 3 benefits to this type of demand-side management are that traditional fossil-fuelled electrical capacity can operate less of the time and more efficiently; renewable electrical capacity such as wind and solar power can be put to use more efficiently when it becomes available; and additional means are available to protect the transmission and distribution infrastructure of the utility. A critical requirement is that pricing should change frequently throughout the day so that budget conscious consumers do not have to wait too long for favourable pricing to use their appliances. 12 refs., 9 figs.

  17. Non-compliance Appliances for Upper Molar Distalization: An Overview.

    Science.gov (United States)

    Noorollahian, Saeed; Alavi, Shiva; Shirban, Farinaz

    2015-01-01

    Tooth Size Arch-length Discrepancy (TSALD) is a common problem in orthodontics. Its clinical signs are tooth crowding, impaction and incisor proclination. The treatment options are dental arch expansion or tooth mass reduction (stripping or extraction). The "extraction versus non-extraction" controversy has been widely debated in the orthodontic literature. Distalization is a kind of arch expansion in anetro-posterior dimension. Several studies have evaluated both the therapeutic effectiveness and the side effects of the appliances for this method of space gaining. In some cases molar distalization is preferred, e.g., a patient with acceptable profile and skeletal pattern and half cusp Class II molar malocclusion or even less. In some cases molar distalization is the only way, e.g., the patient with previous upper premolar extraction and excessive overijet, or a skeletal Class III patient with previous upper premolar extraction needed upper anterior teeth retraction to create reverse overjet aspre surgical orthodontic decompensation. In this review article, we described non-compliance upper molar distalizing appliances.

  18. Multimedia architectures: from desktop systems to portable appliances

    Science.gov (United States)

    Bhaskaran, Vasudev; Konstantinides, Konstantinos; Natarajan, Balas R.

    1997-01-01

    Future desktop and portable computing systems will have as their core an integrated multimedia system. Such a system will seamlessly combine digital video, digital audio, computer animation, text, and graphics. Furthermore, such a system will allow for mixed-media creation, dissemination, and interactive access in real time. Multimedia architectures that need to support these functions have traditionally required special display and processing units for the different media types. This approach tends to be expensive and is inefficient in its use of silicon. Furthermore, such media-specific processing units are unable to cope with the fluid nature of the multimedia market wherein the needs and standards are changing and system manufacturers may demand a single component media engine across a range of products. This constraint has led to a shift towards providing a single-component multimedia specific computing engine that can be integrated easily within desktop systems, tethered consumer appliances, or portable appliances. In this paper, we review some of the recent architectural efforts in developing integrated media systems. We primarily focus on two efforts, namely the evolution of multimedia-capable general purpose processors and a more recent effort in developing single component mixed media co-processors. Design considerations that could facilitate the migration of these technologies to a portable integrated media system also are presented.

  19. Work-related electrocutions involving portable power tools and appliances.

    Science.gov (United States)

    Suruda, A; Smith, L

    1992-09-01

    Portable power tools and appliances can be identified as the source of injury in approximately 9% of occupational electrocutions. A search of fatality records for 1984 through 1986 in National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA) data bases identified 102 electrocutions involving portable appliances and tools that used 110-volt AC and 33 deaths involving welding equipment, which usually operates on 220-volt AC or higher. Of these 102 deaths, 51 occurred in the construction industry, 13 in services, 13 in manufacturing, and 25 in other industries. Plumbing contractors (Standard Industrial Classification [SIC] 1711) had the largest number of deaths (15) in construction. Powered hand-tools were involved in 58 deaths, with electric drills (23) and saws (13) the two largest classes. Proper provision of ground-fault circuit interrupter protection, particularly at temporary work sites, could have prevented most of the deaths from 110-volt AC. Engineering controls for preventing electrocution from portable arc-welding equipment should be evaluated.

  20. Routines for interocclusal appliance therapy among general dental practitioners in a Swedish county.

    Science.gov (United States)

    Gnauck, Maja; Helkimo, Martti; Magnusson, Tomas

    2012-01-01

    The aims of this study were to investigate what kind of interocclusal appliances that were chosen among Swedish dentists when treating temporomandibular disorders (TMD), the clinical rationale for the treatment, the diagnoses that warranted the appliance treatment, the use of adjunct TMD treatments and prognostic considerations, and possible differences in these respects between children/adolescents and adults with TMD, and, finally, possible differences between private practitioners and general practitioners in the public dental service. During the 12-months-period April 2009-March 2010 all general dental practitioners in the county of Jönköping, Sweden, were asked to fill in a questionnaire when performing a TMD treatment with an interocclusal appliance. A total of 394 questionnaires were filled in and returned, 216 (55%) from dentists in public dental service and 178 (45%) from private practitioners. It was found that in 40% of the cases, no pre-treatment recording of the functional status in the masticatory system had been made. The commonest reasons for the treatment were bruxism, headache, and replacement of a previous appliance. Less than half of the appliances made were hard acrylic appliances. Some kind of adjunct therapy had been made in 22% of the cases treated in public dental service. The corresponding figure for those treated by private practitioners was 25%. Therapeutic jaw exercises was the commonest adjunct therapy followed by selective occlusal adjustment. In the vast majority of cases, the dentists judged the prognosis of the treatment to be good. It is concluded that a large number of appliances made to treat TMD were soft appliances, especially in public dental service. This reflects a possible overuse of soft appliances at the expense of hard acrylic appliances. Furthermore, in a large number of cases, the treatment was performed without any pre-treatment registrations, and adjunct therapies were rarely used. In all these respects,there is

  1. Microbial contamination of removable prosthodontic appliances from laboratories and impact of clinical storage.

    Science.gov (United States)

    Williams, D W; Chamary, N; Lewis, M A O; Milward, P J; McAndrew, R

    2011-08-26

    Decontamination of dental instruments has recently been the subject of considerable debate. However, little information is available on the potential bacterial colonisation of dental appliances returning from dental laboratories and their need for decontamination. This study investigated the extent and nature of microbial contamination of removable prosthodontic appliances produced at different dental laboratories and stored in two clinical teaching units (CTU 1 and CTU 2) of a dental hospital and school. Forty consecutive dental prosthodontic appliances that were being stored under varying conditions in the two clinical teaching units were selected for study; the appliances having been produced 'in-house' (hospital laboratory) or 'out-of-house' (external commercial laboratory). Two appliances, that were known to have undergone decontamination before storage, were used as controls. Swabs were taken according to a standard protocol and transferred to the microbiological laboratory with bacterial growth expressed as colony forming units (cfu) per cm(2). Microbial sampling yielded growth from 23 (58%) of the 40 appliances studied (CTU 1, n = 22; CTU 2, n = 18), with 38% of these having a high level of contamination (>42,000 cfu/cm(2)). The predominant bacteria isolated were Bacillus spp. (57%), pseudomonads (22%) and staphylococci (13%). Fungi of the genus Candida were detected in 38% of the samples. There was no significant difference in contamination of the appliances in relation to either their place of production or the CTU (p >0.05). However, the level of contamination was significantly higher (p = 0.035) for those appliances stored in plastic bag with fluid (n = 16) compared to those stored on models (n = 19). No growth was recovered from the two appliances that had undergone decontamination before storage. The research showed that appliances received from laboratories are often contaminated and therefore there is a need for routine disinfection of such items

  2. National Technical Committee on Household Appliances of Standardization Administration of China (SAC/TC 46) Upon the approval of Standardization

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Administration of China (SAC),National Technical Committee on Household Appliances of Standardization Administration of China (SAC/TC 46) was officially established in May 2005,taking charge of the work of standardization regarding the safety,performance,installation and repair,etc.,of household and similar electrical appliances nationwide.The secretariat was established in China Household Electric Appliance Research Institute.

  3. 76 FR 56126 - Energy Conservation Program: Treatment of “Smart” Appliances in Energy Conservation Standards and...

    Science.gov (United States)

    2011-09-12

    ... Parts 430 and 431 Energy Conservation Program: Treatment of ``Smart'' Appliances in Energy Conservation...'' appliances in the development of DOE's energy conservation standards, as well as in test procedures used to...'' appliances in the development of DOE's energy conservation standards, as well as in test procedures used...

  4. 77 FR 82 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Extension of...

    Science.gov (United States)

    2012-01-03

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... on certain kitchen appliance shelving and racks from the People's Republic of China, covering the period January 7, 2009, through December 31, 2009. See Certain Kitchen Appliance Shelving and Racks...

  5. 78 FR 78815 - Certain Kitchen Appliance Shelving and Racks from the People's Republic of China: Rescission of...

    Science.gov (United States)

    2013-12-27

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks from the People's Republic of... antidumping duty order on certain kitchen appliance shelving and racks from the People's Republic of China... kitchen appliance shelving and racks from the PRC.\\1\\ On September 30, 2013, the Department received...

  6. 77 FR 21734 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Final Results...

    Science.gov (United States)

    2012-04-11

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... results of the first administrative review of the antidumping duty order on certain kitchen appliance... (``POR'') March 5, 2009, through August 31, 2010.\\2\\ \\1\\ See Certain Kitchen Appliance Shelving and...

  7. 77 FR 22559 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Extension of...

    Science.gov (United States)

    2012-04-16

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... kitchen appliance shelving and racks from the People's Republic of China (``PRC''), covering the period... Review of Certain Kitchen Appliance Shelving and Racks from the People's Republic of China: Selection...

  8. 78 FR 5414 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China; 2010-2011...

    Science.gov (United States)

    2013-01-25

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... kitchen appliance shelving and racks from the People's Republic of China (``PRC'').\\1\\ We gave interested... Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Antidumping...

  9. 76 FR 20950 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Extension of...

    Science.gov (United States)

    2011-04-14

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... (``Department'') initiated an administrative review of certain kitchen appliance shelving and racks from the... Antidumping Review of Certain Kitchen Appliance Shelving and Racks from the People's Republic of...

  10. INTRODUCING A NEW REMOVABLE APPLIANCE FOR INTRUSION OF POSTERIOR TEETH

    Directory of Open Access Journals (Sweden)

    A.M KALANTAR MOTAMEDI Karimi

    2000-09-01

    Full Text Available Introduction. In patients with anterior open bite, wether with skeletal factors, or with dental factors, the excessive eruption of posterior teeth, is one of the specific findings, and this excessive eruption causes the backward and downward rotation of mandible, which results in an increase in lower facial height and steep mandibular plane. In these patients, depressing of posterior teeth is the ideal treatment and to achieve this goal is one of the most difficult tooth movements for orthodontist. Methods. For this purpose, a removable appliance was designed and to evaluate its eficacy, six patients were selected, four of them were in permanent dentition and two in mixed dentition period. They were under treatment with this appliance, full time for three to three and a half months. Before starting treatment, lateral cephalometric radiograph and study casts were prepared and the above mentioned period were repeated. The amount of bite closure was measured by comparing study casts before and after treatment. Also cephalometric changes were evaluated by comparing pre-and-post treatment records. Results. As a result average of maxillary first molar intrusion was 1.1 mm and average of mandibular first molar intrusion was 1.3 mm , which had resulted in upward and forward rotation of the mandible. The average changes due to mandibular rotation were: The amount of bite closure 3.7mm; Decrease in lower facial height 3mm; Prominence of chin 3.2 mm; Decrease in mandibular plane angle 2.3; Decrease in y-axis angle 2; Increase in facial angle 2.3. Discussion. Therefore it is obvious that clinically the suggested appliance is capable of, intruding posterior teeth in both of maxilla and mandible and then due to upward and forward rotation of the mandible, the steep mandibular plane and lower facial height are decreased. Now according to the results of this investigation can be highly hopefull that, the number of patients who need orthographic surgery, for

  11. Energy efficiency, market failures, and government policy

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Koomey, J.G.; McMahon, J.E.; Sanstad, A.H. [Lawrence Berkeley Lab., CA (United States). Energy and Environment Div.; Hirst, E. [Oak Ridge National Lab., TN (United States). Energy Div.

    1994-03-01

    This paper presents a framework for evaluating engineering-economic evidence on the diffusion of energy efficiency improvements. Four examples are evaluated within this framework. The analysis provides evidence of market failures related to energy efficiency. Specific market failures that may impede the adoption of cost-effective energy efficiency are discussed. Two programs that have had a major impact in overcoming these market failures, utility DSM programs and appliance standards, are described.

  12. 颊侧多曲簧活动矫治器临床应用中的生物学效应%Clinical bioeffects of buccal multiloop appliance

    Institute of Scientific and Technical Information of China (English)

    张婉楠; 侯录; 徐实谦

    2014-01-01

    the soft elastic role cannot only promote growth and development of the maxilary, but also inhibit the excessive growth of the maxilary and trigger mandibular functional shift, thereby achieving crossbite correction. Therefore, the buccal multiloop appliance can have good achievements in the clinical crossbite correction of the deciduous and permanent teeth. For patients with Class III malocclusion, the buccal multiloop appliance also shows good results, and the corresponding clinical problems and deficiencies appear to be resolved one by one accordingly. So the buccal multiloop appliance is highly efficient for crossbite correction.

  13. Effect of thermoplastic appliance thickness on initial stress distribution in periodontal ligament

    Directory of Open Access Journals (Sweden)

    De-Shin Liu

    2015-04-01

    Full Text Available A numerical investigation into the initial stress distribution induced within the periodontal ligament by thermoplastic appliances with different thicknesses is performed. Based on the plaster model of a 25-year-old male patient, a finite element model of the maxillary lateral incisors and their supporting structures is constructed. In addition, four finite element models of thermoplastic appliances with different thicknesses in the range of 0.5–1.25 mm are also constructed based on the same plaster model. Finite element analysis simulations are performed to examine the effects of the force delivered by the thermoplastic appliances on the stress response of the periodontal ligament during the elastic recovery process. The results show that the stress induced in the periodontal ligament increases with an increasing appliance thickness. For example, the stress triples from 0.0012 to 0.0038 MPa as the appliance thickness is increased from 0.75 to 1.25 mm. The results presented in this study provide a useful insight into as a result of the compressive and tensile stresses induced by thermoplastic appliances of different thicknesses. Moreover, the results enable the periodontal ligament stress levels produced by thermoplastic appliances of different thicknesses to be reliably estimated.

  14. Structural conformation and leaching from in vitro aged and retrieved Invisalign appliances.

    Science.gov (United States)

    Schuster, Susan; Eliades, George; Zinelis, Spiros; Eliades, Theodore; Bradley, T Gerard

    2004-12-01

    The objectives of this study were to investigate the structure of Invisalign appliances (Align Technology, Santa Clara, Calif) after intraoral exposure, and to qualitatively and quantitatively characterize the substances leached from the aligners after accelerated in vitro aging. Samples of Invisalign appliances were randomly selected from 10 patients before intraoral placement and after retrieval, and the prepared specimens were subjected to (1) bright-field optical reflection microscopy to study the surface morphology; (2) Fourier transform infrared microspectroscopy to characterize the in vivo changes in molecular composition induced on appliance surfaces, (3) scanning electron microscopy and energy dispersive X-ray microanalysis to identify the elemental composition of integuments formed on the surface, and (4) Vickers hardness (HV 200) testing. Another set of reference and retrieved appliances was subjected to artificial aging for 2 weeks, and the extracts were subjected to gas chromatography-mass spectroscopy. The retrieved appliances demonstrated substantial morphological variation relative to the as-received specimens involving abrasion at the cusp tips, adsorption of integuments, and localized calcification of the precipitated biofilm at stagnation sites. Buccal segments of retrieved appliances showed an increase in hardness, which might be attributed to mastication-induced cold work; however, the clinical implication of this effect on mechanotherapy is unknown. In vitro aged and retrieved appliances were found to leach no traceable amount of substances in an ethanol aging solution.

  15. Stochastic Optimal Scheduling of Residential Appliances with Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Hongyu; Pratt, Annabelle; Chakraborty, Sudipta

    2015-07-03

    This paper proposes a stochastic, multi-objective optimization model within a Model Predictive Control (MPC) framework, to determine the optimal operational schedules of residential appliances operating in the presence of renewable energy source (RES). The objective function minimizes the weighted sum of discomfort, energy cost, total and peak electricity consumption, and carbon footprint. A heuristic method is developed for combining different objective components. The proposed stochastic model utilizes Monte Carlo simulation (MCS) for representing uncertainties in electricity price, outdoor temperature, RES generation, water usage, and non-controllable loads. The proposed model is solved using a mixed integer linear programming (MILP) solver and numerical results show the validity of the model. Case studies show the benefit of using the proposed optimization model.

  16. Accidental debondings: Buccal vs fully individualized lingual multibracket appliances.

    Science.gov (United States)

    Ziebura, Thomas; Hohoff, Ariane; Flieger, Stefanie; Stamm, Thomas

    2014-05-01

    The aim of this study was to retrospectively assess the frequency and localizations of bond failures (BFs) in patients treated with either lingual (TOP-Service für Lingualtechnik GmbH, a 3M Company, Bad Essen, Germany) or buccal (Mini Diamond brackets/Accent molar tubes; Ormco, Orange, Calif) full multibracket appliances in both dental arches. Data were acquired by an independent investigator from the patient records of 3 practitioners. To establish a standardized observation period, the first year of treatment was analyzed for each patient. Statistical analysis comprised the Kruskal-Wallis, Wilcoxon, Mann-Whitney U, and Fisher exact tests. The significance level was set at P <0.05. The mean number of BFs per patient in the first year of treatment did not differ significantly between the lingual group (n = 59; mean age, 31.1 years; mean BFs per patient, 2.63; SD, 2.77; minimum, 0; maximum, 13) and the buccal group (n = 44; mean age, 15.14 years; mean BFs per patient, 2.61; SD, 3.41; minimum, 0; maximum, 14) (P = 0.428) or with respect to sex (lingual group, P = 0.251; buccal group, P = 0.414) or practitioner (lingual group, P = 0.755; buccal group, P = 0.060), but molar attachments were more prone to BFs than were premolar brackets (lingual group, P = 0.015; buccal group, P = 0.049), and premolar brackets were more prone to BF than anterior brackets (lingual group, P = 0.005; buccal group, P = 0.004). With both appliances, a mean of 2.62 BFs per patient in the first year of treatment can be expected; this benchmark provides a reference for patient briefing, which is very important considering the large interindividual variances and budgeting considerations. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  17. 2010 Northwest Federal Market Assessment Report

    Energy Technology Data Exchange (ETDEWEB)

    Scanlon, Tim; Sandusky, William F.

    2011-09-01

    The primary intent of this market assessment is to provide insights on the effectiveness of current energy efficiency and renewable energy program offerings available to Federal sites in the region. The level of detail, quality and currency of the data used in this market assessment varies significantly by Federal agency and energy efficiency service provider. Limited access to some Federal sites, limited availability of key points of contact, time/resource constraints, and other considerations limited the total number of Federal agencies and energy efficiency service providers participating in the survey.

  18. International Review of Frameworks for Impact Evaluation of Appliance Standards, Labeling, and Incentives

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Vine, Edward [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Khanna, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-12-15

    In recent years, the number of energy efficiency policies implemented has grown very rapidly as energy security and climate change have become top policy issues for many governments around the world. Within the sphere of energy efficiency policy, governments (federal and local), electric utilities, and other types of businesses and institutions are implementing a wide variety of programs to spread energy efficiency practices in industry, buildings, transport, and electricity. As programs proliferate, there is an administrative and business imperative to evaluate the savings and processes of these programs to ensure that program funds spent are indeed leading to a more energy-efficient economy.

  19. National gas survey: report to the Federal Energy Regulatory Commission by the Conservation-Technical Advisory Task Force on Efficiency in the Use of Gas

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    As the available supplies of natural gas diminish, it is imperative that existing supplies of gas be utilized in the most prudent manner. The most important stimulus to promote the wise use of gas is the price of gas itself. The inevitable rising prices of natural gas will continue to enhance the cost-effectiveness of many natural gas conservation strategies. It is widely recognized that there are significant opportunities to reduce the wasteful and inefficient use of gas and that some of the most cost-effective conservation strategies are being applied only locally or regionally. This paper identifies and analyzes methods that promote the efficient use of and conservation of natural gas. To assist in the evaluation of the methods, the relative cost of implementing each strategy and the impact on gas usage were identified. The Task Force has identified 25 energy-conservation strategies that may be useful to the homeowner. Solar-assisted gas hot-water heating is reviewed. In the near future, solar hot-water heating with natural gas as a backup may prove to be economically viable. Many of the strategies that may benefit the residential sector can be directly applied to many small commercial and industrial customers. Individual metering of tenants of a commercial building makes each user cognizant of his consumption. A methodology for identifying potential energy savings in commercial buildings is presented in Appendix C. Large commercial and industrial consumers often have unique process requirements for gas and no generalized approaches are available. Moreover, most of these consumers have the in-house technical expertise to identify gas-saving measures on a case-by-case basis. Appendix D provides a guide to energy conservation for industrial consumers. Incentives for implementing energy conservation are discussed in detail. (MCW)

  20. Accelerating the Adoption of Second-Tier Reach Standards forApplicable Appliance Products in China

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jiang; Fridley, David

    2007-03-01

    The minimum energy efficiency standards program for household appliances in China was initiated in 1989. Since 1996, CLASP and its implementing partner, LBNL, have assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; clothes washers; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes (under development). Before 2003, China's traditional approach to standards development involved small increases in efficiency requirements for implementation within 6 months of a standard's approval. Since 2003, China has adopted a new approach in setting MEPS. This new approach involves the development of two tiers of standards--one for initial implementation and a second tier at a more aggressive level of energy efficiency for implementation three to five years later. The second-tier standard is also referred to as a 'reach standard'. Reach standards have now been developed in China for: color TVs; refrigerators; air conditioners; and external power supplies. This report is presented in five sections. After the introduction in Section 1, Section 2 analyzes the distribution of the efficiency of refrigerators and air-conditioners in China based on data collected by the China Energy Label Center for the mandatory energy information label program. The results provide an assessment of the adoption of reach standards for these two products. Section 3 summarizes on-going collaborations with Shanghai related to early local adoption of reach standards, and presents both the impact and an analysis of barriers to the local adoption of reach standard for air-conditioners. Section 4 offers suggestions for local governments on how to move forward in adopting reach standards in their localities and concludes with a summary of the results and a plan for developing local capacity in

  1. Cephalometric study of Class II Division 1 patients treated with an extended-duration, reinforced, banded Herbst appliance followed by fixed appliances.

    Science.gov (United States)

    Tomblyn, Travis; Rogers, Michael; Andrews, Lee; Martin, Chris; Tremont, Timothy; Gunel, Erdogan; Ngan, Peter

    2016-11-01

    The Herbst appliance has been used in the treatment of Class II malocclusions with deficient mandibles. Various protocols, including different durations of the orthopedic treatment phase and stepwise advancement of the mandible, have been advocated for increasing the orthopedic effects. The objective of this study was to investigate the skeletal and dental changes in patients treated with a reinforced banded Herbst appliance for an extended duration and fixed appliance therapy. The study group consisted of 30 patients (16 boys, 14 girls; mean age, 12.3 ± 2.5 years) with Class II Division 1 malocclusions who were successfully treated with the new Herbst protocol followed by fixed appliances. Lateral cephalometric radiographs were taken before treatment, at the completion of Herbst treatment, and after removal of fixed appliances. The average treatment times were 1.5 ± 0.7 years for the Herbst treatment and 1.8 ± 0.5 years for the fixed appliances. A control Class II sample from the Bolton-Brush study was used to subtract growth from treatment changes to determine the appliance effect. Data were analyzed using analysis of variance and the Tukey-Kramer test. After the Herbst treatment, the incisal relationships of all subjects had been overcorrected to end-to-end relationships. Overjet was reduced by 7.2 mm after subtracting changes from growth. The skeletal contribution was 2.5 mm (35%), and the dental contribution was 4.7 mm (65%). The molar relationship was overcorrected to a more Class I relationship by 7.5 mm. The Wits appraisal was improved by 4.2 mm. Vertically, overbite was decreased by 3.3 mm. The maxillary and mandibular molars were extruded by 1 mm. The occlusal plane rotated clockwise by 5° with little change in the mandibular plane angle. After the treatment with fixed appliances, the overjet correction was maintained at 7.6 mm. The skeletal contribution was 2.9 mm (38%), and the dental contribution was 4.7 mm (62%). The molar

  2. Fiscal Federalism

    Directory of Open Access Journals (Sweden)

    Tatiana Mosteanu

    2007-06-01

    Full Text Available The central budget of a country collects only a fraction of the total fiscal revenues and executes only o fraction of the national public expenditures, the rest of the revenues and expenditures becoming the responsability of subnational governments. The economist Charles Tiebout developed a theoretical model which although makes an imperfect description of the reality, shows that people’s mobility is being influenced by tax rates and the amount of state/local expenditures. Thus, he suggests that the degree of responsibility that can be appointed to the local budgets should subscribe to the tax – benefits ratio, the extend of the positive externalities and the scale economies of public goods. Also, the issue of revenues distribution among communities is being raised, being identified three kinds of grants used by the public authorities: matching grants, block grants and conditional block grants. In the concept of fiscal federalism there can be found a limited analogy between national public finance theory and international public finance theory, with the international taxation as the pivotal element.

  3. Economic Analysis of Smart Appliance Penetration from a Societal Perspective in Korea

    National Research Council Canada - National Science Library

    Son, Sung-Yong; Park, Jong-Bae; Kim, Min Jeong; Song, Hyoung-Yong; Roh, Jae-Hyung

    2014-01-01

    .... The recent evolution of those to having network connectivity and higher intelligence brought an opportunity to handle them as new controllable demand side resources, which are called smart appliances...

  4. Impacts of Imported Liquefied Natural Gas on Residential Appliance Components: Literature Review

    Energy Technology Data Exchange (ETDEWEB)

    Lekov, Alex; Sturges, Andy; Wong-Parodi, Gabrielle

    2009-12-09

    An increasing share of natural gas supplies distributed to residential appliances in the U.S. may come from liquefied natural gas (LNG) imports. The imported gas will be of a higher Wobbe number than domestic gas, and there is concern that it could produce more pollutant emissions at the point of use. This report will review recently undertaken studies, some of which have observed substantial effects on various appliances when operated on different mixtures of imported LNG. While we will summarize findings of major studies, we will not try to characterize broad effects of LNG, but describe how different components of the appliance itself will be affected by imported LNG. This paper considers how the operation of each major component of the gas appliances may be impacted by a switch to LNG, and how this local impact may affect overall safety, performance and pollutant emissions.

  5. Correction of class III malocclusion using modified tandem appliance-two case reports

    Directory of Open Access Journals (Sweden)

    J Jeevarathan

    2013-01-01

    Full Text Available Skeletal discrepancies in growing children can have great physical and psychological impact on their appearance. These deformities require orthopedic correction at an appropriate age to avoid future extensive management. Managing a midfacial deficiency or true mandibular prognathism is perhaps the most challenging situation for the clinician. Many orthopedic appliances like chin cup, facemask, and so on have been advocated to correct class III malocclusion. The major problems with these appliances are physical appearance, skin irritation from the anchorage pads and hence, less patient compliance. We present management of class III malocclusion in two children with modified tandem appliance (MTA, which is an intraoral appliance, with no extraoral anchorage, and has better patient compliance and cooperation.

  6. A new modified tandem appliance for management of developing Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Ram Sukh

    2013-01-01

    Full Text Available Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior cross bite and retrognathic maxilla at the mixed dentition stage. Anterior cross bite was corrected in 3 months and the positive overjet of 4 mm after continued use of the appliance for 1 year. There was a significant improvement in profile of the patient. The use of this appliance in this type of malocclusion enabled the correction of malocclusion in a few months and encouraging favorable skeletal growth in the future.

  7. Design, development, and demonstration of a promising integrated appliance. Phase I: design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, W. D.; Lawrence, W. T.; Wilson, R. P.

    1977-09-01

    The combination or integration of appliances for the economical recovery of energy which is normally wasted during the operation of heating systems, air conditioners, water heaters, stoves, clothes washers and driers, and refrigerators in homes and commercial buildings was studied. The potential energy savings achievable by using waste heat from one appliance as heat input to another, e.g., water heaters, was estimated, and the economic benefit to the consumer calculated. Six integrated appliance systems, all involving waste heat utilization to augment water heating were identified as economically feasible with a maximum cost payback period of 3.5 y in residential buildings and 5.0 y for commercial buildings. These included heat recovery from furnaces, air conditioners, commercial ranges, heat in water drains in homes, and heat in water drains in commercial buildings. The first three are the most promising. A program to demonstrate the performance of these three integrated appliance systems and to further their commercialization is recommended. (LCL)

  8. Anterior crossbite correction in primary and mixed dentition with removable inclined plane (Bruckl appliance).

    Science.gov (United States)

    Jirgensone, Irena; Liepa, Andra; Abeltins, Andris

    2008-01-01

    Anterior crossbite correction in early mixed dentition is highly recommended as this kind of malocclusion do not diminish with age. Uncorrected anterior crossbite may lead to abnormal wear of the lower incisors, dental compensation of mandibular incisors leading to thinning of labial alveolar plate and/or gingival recession. There are several methods for solving this problem. In this article we would like to describe removable inclined plane. This is a removable simple functional appliance on the lower arch (jaw), which works as inclined plane. One of the advantage of the Bruckl appliance is that it can also be used as retention appliance after active treatment as well as it is possible to add acrylic teeth if necessary. Therefore it can be used as a removable partial denture in lower jaw in case where there is a premature loss of the primary teeth. The use of this appliance is illustrated with three cases.

  9. Autonomic cardiac modulation in obstructive sleep apnea: effect of an oral jaw-positioning appliance

    National Research Council Canada - National Science Library

    Coruzzi, Paolo; Gualerzi, Massimo; Bernkopf, Edoardo; Brambilla, Lorenzo; Brambilla, Valerio; Broia, Vanna; Lombardi, Carolina; Parati, Gianfranco

    2006-01-01

    ... with other therapeutic approaches. The aim of our study was to investigate the responses of autonomic indexes of neural cardiac control to another type of OSA treatment based on an oral jaw-positioning appliance...

  10. Prevalence of white-spot lesions before and during orthodontic treatment with fixed appliances.

    Science.gov (United States)

    Lucchese, Alessandra; Gherlone, Enrico

    2013-10-01

    The aim of the study was to determine the prevalence of white-spot lesions (WSLs) in patients with fixed orthodontic appliances. The cross-sectional study sample consisted of three groups of patients: group I, 59 patients treated orthodontically for 6 months; group II, 64 patients treated for 12 months; group 0 (control), 68 patients examined immediately before appliance placement. All groups were treated with a 0.022-inch slot preadjusted appliance and they wore a functional fixed appliance. The presence of WSLs was evaluated by visual examination using the scoring system proposed by Gorelick. The groups were evaluated for differences in the prevalence of at least one WSL using Fisher's exact test, followed by Bonferroni pairwise comparisons. The prevalence of WSLs by tooth type was evaluated with logistic regression (P orthodontic bonding. Considering how quickly these lesions can develop and become irreversible, early diagnosis is of critical importance.

  11. Treatment of pseudo Class III malocclusion by modified Hawleys appliance with inverted labial bow

    Directory of Open Access Journals (Sweden)

    K S Negi

    2011-01-01

    Full Text Available Pseudo Class III malocclusion is characterized by an anterior crossbite with functional forward mandibular displacement. Various appliances have been devised for early treatment of a pseudo Class III. The aim of this article is to highlight the method of construction and use a simple removable appliance termed as "Modified Hawleys appliance with inverted labial bow" to treat psuedo class III malocclusion in the mixed dentition period. It also emphasizes the importance of differentiating between true Class III and pseudo Class III. This appliance in this type of malocclusion enabled the correction of a dental malocclusion in a few months and therapeutic stability of a mesially positioned mandible encouraging favorable skeletal growth.

  12. Correction of class III malocclusion using modified tandem appliance-two case reports.

    Science.gov (United States)

    Jeevarathan, J; Koora, Kiran; Sudhakar, V; Muthu, M S; Prabhu, Rathna V

    2013-01-01

    Skeletal discrepancies in growing children can have great physical and psychological impact on their appearance. These deformities require orthopedic correction at an appropriate age to avoid future extensive management. Managing a midfacial deficiency or true mandibular prognathism is perhaps the most challenging situation for the clinician. Many orthopedic appliances like chin cup, facemask, and so on have been advocated to correct class III malocclusion. The major problems with these appliances are physical appearance, skin irritation from the anchorage pads and hence, less patient compliance. We present management of class III malocclusion in two children with modified tandem appliance (MTA), which is an intraoral appliance, with no extraoral anchorage, and has better patient compliance and cooperation.

  13. A new modified tandem appliance for management of developing Class III malocclusion.

    Science.gov (United States)

    Sukh, Ram; Singh, Gyan P; Tandon, Pradeep

    2013-10-01

    Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior cross bite and retrognathic maxilla at the mixed dentition stage. Anterior cross bite was corrected in 3 months and the positive overjet of 4 mm after continued use of the appliance for 1 year. There was a significant improvement in profile of the patient. The use of this appliance in this type of malocclusion enabled the correction of malocclusion in a few months and encouraging favorable skeletal growth in the future.

  14. Home Appliances as Home Controllers: Concepts and Set-Top Box Implementation

    Directory of Open Access Journals (Sweden)

    Z. Jovanovic

    2010-11-01

    Full Text Available In this paper we present a novel softwarebased home control platform suitable as an extension to digital home appliances that are equipped with a CPU (settop boxes, home theatre systems, TV sets, gaming consoles, etc. By using an appliance they are already accustomed to, users become able to control lights, appliances and media playback in their homes. Intelligence and awareness are achieved with a support for execution of recipes – preprepared scripts that define timely actions and respond to triggers obtained from sensors. Software abstraction layer facilitates integration of any desired communication protocol. In our prototype, we supported Zigbee and DMX for light control, X10 for light/appliances control over power line, as well as Ethernet-based optical cameras as motion/presence sensors and UPnP/DLNA based equipment for distributed media playback.

  15. Modified Intraoral Repositioning Appliance in Complete Bilateral Cleft Lip and Palate

    OpenAIRE

    Raghav, Pradeep; Ahuja, NK; Gahlawat, Subhash

    2010-01-01

    Objective The purpose of the modified repositioning appliance was to overcome the shortcoming of existing design for repositioning protruded premaxilla in a child with bilateral cleft lip and palate. Methods The basic principles of design were similar to Latham’s appliance but the surgical pinning of premaxillary segment was avoided and instead acrylic splint was prepared. Conclusions This technique avoids any invasive procedure, is useful to reposition protruded premaxillary segment in bilat...

  16. Assessment of nickel release from various dental appliances used routinely in pediatric dentistry

    OpenAIRE

    Kulkarni, Parimala; Agrawal, Suchi; Bansal, Arpana; Jain, Ankur; Tiwari, Utkarsh; Anand, Ayushi

    2016-01-01

    Context: The use of nickel-containing alloys in dentistry has been questioned because of the biological liabilities of nickel and the release of nickel ions from dental appliances into the oral cavity. The potential health hazards of nickel and chromium and their compounds have been the focus of attention for more than 100 years. It has established that these metals could cause hypersensitivity. Aims: To assess the nickel release from various dental appliances used in pediatric dentistry. Set...

  17. Globalni izzivi v svetovni industriji bele tehnike = Global Challenges in the Domestic Appliances Industry

    OpenAIRE

    Dušan Gošnik

    2009-01-01

    bal Challenges in the Domestic Appliances IndustryAbstract: The domestic appliances industry is a mature industry. Changes in the business environment such as political, law, cultural, social, ecological and technological influences have an effect on the future development of this industry. Challenges to producers in this industry are oriented towards the further globalisation of the business, managing processes, new product and innovations development, and towards establishing and empowermen...

  18. The Hybrid Aesthetic Functional (HAF) Appliance: A Less Visible Proposal for Functional Orthodontics

    Science.gov (United States)

    2013-01-01

    In modern orthodontics, aesthetics appear to have a decisive influence on orthodontic appliance preferences and acceptability. This paper reports the early application of a newly emerged functional device with enhanced aesthetics in a Class II treatment. Patient perspectives and technical considerations are discussed along with recommendations for further design development. It can be assumed that the use of thermoplastic material-based appliances may meet both the therapeutic and aesthetic demands of young age groups. PMID:23956884

  19. A Context Menu for the Real World: Controlling Physical Appliances Through Head-Worn Infrared Targeting

    Science.gov (United States)

    2013-12-10

    can be controlled remotely. The proliferation of smart , controllable devices such as intelligent lighting, AV equipment, HVAC systems, or kitchen ...novel method for selecting and controlling smart appliances in physical spaces through a head-worn computing device with near-eye display and wireless...list selection on a wearable device. We also report qualitative data from using our device to control multiple appliances in a smart home scenario

  20. Indoor Air Quality and Ventilation Strategies in the Use of Combustion Space Heating Appliances in Housing

    OpenAIRE

    Setiani, Onny

    1994-01-01

    Indoor air quality (IAQ) in the use of combustion appliances is important for adequate evaluation of air pollution health risks. Since people spend most of their time inside buildings, especially the elderly and children, their exposure to indoor air contaminants can increase health problems in the community. Combustion materials emitted from combustion space heating appliances in housing during the winter may become a serious problem to health, since sources of ventilation are usually left c...

  1. Occlus-o-Guide® versus Andresen activator appliance: neuromuscular evaluation.

    Science.gov (United States)

    Farronato, Giampietro; Giannini, Lucia; Galbiati, Guido; Grillo, Elena; Maspero, Cinzia

    2013-05-20

    The aim of the present study was to assess the muscular variations at the electromyography (EMG) level for the anterior temporalis muscles and masseter muscles during treatment with Occlus-o-Guide® and Andresen activator appliances. Eighty-two patients (35 males and 47 females) aged between 8 and 12 years (mean age, 10.5±0.8 years) participated in the study. Fifty patients underwent treatment with an Occlus-o-Guide® and 32 patients with an Andresen activator. All patients underwent EMG examination using a Freely EMG (De Gotzen, Legnano, Italy) and surface bipolar electrodes when the appliances were worn for the first time (T0), and after 6 months (T1) and after 12 months (T2) of appliance use. Statistical analysis showed that both at T0 and T2, the percent overlapping coefficient (POC) of the anterior temporalis muscles was not statistically different between the appliance groups. At T0, the POC of the masseter muscles was significantly lower for the Andresen appliance as compared to the Occlus-o-Guide® (p=0.02), while at T2 this significance was lost. At insertion of an appliance, all patients show neuromuscular balance that does not correspond to orthognathic occlusion. Both appliances work by creating muscular imbalance. With the appliances in situ, EMG responses were generally analogous for the Occlus-o-Guide® and the Andresen activator; however, the imbalance was greater and the recovery of the orthological muscular balance was slower in patients under treatment with the Andresen activator as compared to those with the Occlus-o-Guide®.

  2. Biodegradation of Orthodontic Appliances and Their Effects on the Blood Level of Nickel and Chromium

    Science.gov (United States)

    1990-05-01

    average orthodontic appliance used for the maxillary arch with a full complement of teeth were utilized. Each maxillary set comprised the following: two...involving stainless steel manufacturing, no increases in either lung cancer nor sinus cancer were found in the individuals employed in these plants. 1 In one...bonding to the teeth . Five sets of the whole arch appliances were ligated to rectangular stainless steel archwires and the other five sets were ligated to

  3. Fixed Appliance with Expansion Screw for the Treatment of Primary Anterior Crossbite.

    Science.gov (United States)

    Paul, Sanchit; Rao, Ashwin; Chalakkal, Paul; Mony, Saranya

    2016-05-01

    Anterior crossbite occurring during the primary dentition stage needs immediate correction so that functional, aesthetic and skeletal complications may be avoided in the future. This article describes a fixed appliance with an expansion screw that was successfully used for the treatment of primary anterior crossbite. Crossbite correction was achieved in about six weeks. A detailed description with regard to fabrication of the appliance has also been discussed.

  4. Evaluation of Oxidative Stress Biomarkers in Patients with Fixed Orthodontic Appliances

    OpenAIRE

    Sevil Sema Atuğ Özcan; İsmail Ceylan; Erkan Özcan; Nezahat Kurt; İlhan Metin Dağsuyu; Cenk Fatih Çanakçi

    2014-01-01

    Aim. The aim of this study was to examine the changes in the levels of interleukine-1 beta (IL-1 β ), tumor necrosis factor alpha (TNF- α ), malondialdehyde (MDA), nitric oxide (NO), and 8-hydroxydeoxyguanosine (8-OHdG) in saliva and IL-1 β , TNF- α , and NO in gingival crevicular fluid (GCF) samples of patients with fixed orthodontic appliances. Material and Method. The subject population consisted of 50 volunteers who were in need of orthodontic treatment with fixed orthodontic appliances. ...

  5. Effect of fixed orthodontic appliances on salivary microbial parameters at 6 months: a controlled observational study

    Directory of Open Access Journals (Sweden)

    Delphine MARET

    2014-01-01

    Full Text Available Objective: The aim of this study was to assess the microbial changes in children with fixed orthodontic appliances compared with a control group of children without orthodontic treatment. Material and Methods: Ninety-five children, aged between 12 and 16 years, participated in this study. Forty-eight subjects were fitted with fixed orthodontic appliances and forty-seven were free of any such appliances. The follow-up was 6 months for all children. The association between orthodontic appliances and high levels of Streptococcus mutans and Lactobacillus spp was assessed with logistic regression models, taking age, sex, pH and buffer capacity into account. Results: Differences at baseline between the two groups were not statistically significant. We found that wearing a fixed orthodontic appliance was associated with high levels of Streptococcus mutans and Lactobacillus spp (adjusted OR: 6.65, 95% CI [1.98-22.37]; 9.49, 95% CI [2.57-35.07], respectively, independently of other variables. Conclusion: The originality of the present epidemiological study was to evaluate the evolution of salivary microbial parameters in a population of children with fixed orthodontic appliances. Our results show an increase of Streptococcus mutans and Lactobacillus spp values during the follow-up. The whole dental workforce should be aware that preventive measures are of paramount importance during orthodontic treatment.

  6. Comparison of External Apical Root Resorption after Orthodontic Treatment with Two Appliances (Standard Edgewise and MBT

    Directory of Open Access Journals (Sweden)

    V. Mollabashi

    2016-01-01

    Full Text Available Introduction & Objective: The aim of this study was todeterminetheamount of external apical root resorption(EARRwithin two orthodontic appliances (standard edgewise and MBT. Material & Methods In this retrospective study, panoramic radiographs of 83 orthodontic patients (27 male and 56 female were evaluated. 46 patients had been treated with standard edgewise appliance (29 patients with extraction and 17 patients without extraction and 37 patients had been treated with MBT appliance (27 patients with extraction and 10 patients without extraction.EARR were evaluated in 24 teeth (anterior teeth, premolars and first molars in each patient. SPSS software and ordinal regression test were used for statistical analysis. Result: In this study the most EARR was seen in upper lateral incisors, then lower lateral incisors.EARR in upper canines and lower second premolars was significantly related to extraction of first premolarin MBT appliance. In non extraction cases, EARR was not related to the orthodontic appliance. Conclusion: Incisors teeth are the most disposed teeth to EARR. Orthodontic treatment with extraction increased EARR in canines and second premolars. MBT appliance may increase EARR. Sci J Hamadan Univ Med Sci . 2016; 22 (4 :316-322

  7. Use of Residential Smart Appliances for Peak Load Shifting & Spinning Reserves: Cost Benefit Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, Chellury; Pratt, Robert G.

    2010-12-01

    Abstract In this paper, we present the results of an analytical cost-benefit study of residential smart appliances in support of a joint stakeholder petition to the EPA and DOE to provide a 5% credit to meet ENERGY STAR eligibility criteria for products that meet the definition of a smart appliance. The underlying hypothesis is that smart appliances can play a critical role in addressing some of the challenges associated with increased electricity demand, and increased penetration of renewable sources of power. Our analytical model utilizes current annual appliance electricity consumption data, and estimates what the wholesale grid operating cost savings would be if some percentage of appliance loads were shifted away from peak hours to run during off-peak hours, and appliance loads serve power system balancing needs such as spinning reserves that would otherwise have to be provided by generators. Historical wholesale market clearing prices (location marginal and spinning reserve) from major wholesale power markets in the United States are used to estimate savings. The savings are then compared with the five percent credit, to determine if the savings in grid operating costs (benefits) are at least as high as the credit (cost) if not higher.

  8. Evolution of treatment mechanics and contemporary appliance design in orthodontics: A 40-year perspective.

    Science.gov (United States)

    McLaughlin, Richard P; Bennett, John C

    2015-06-01

    Until the early 1970s, successful treatment with the Begg technique and the Tweed edgewise technique required tedious wire bending. The introduction of Andrews' straight wire appliance changed that, and it was one of the most significant contributions in the history of orthodontics. The straight wire appliance significantly reduced the amount of wire bending and also brought along other options in treatment mechanics. Retraction of the canines with elastic chains and ligature wires became more common. Sliding mechanics in place of closing loops became the method of space closure for a significant number of clinicians. Edgewise force levels were initially used to close spaces; however, it was soon observed that lighter forces were more effective with sliding mechanics. Along with these changes, it became apparent that compensation in the appliance was needed, depending on the type of malocclusion and particularly with varying extraction sequences. Various appliance designs were developed to accommodate changes in mechanics and force levels. These modifications improved tooth positions at the end of treatment as long as the brackets were properly placed. These major changes in appliances, force levels, and treatment mechanics can be traced back to the work of Dr Lawrence Andrews and the straight wire appliances.

  9. Opportunities for regional harmonization of appliance standards and l abeling program

    Energy Technology Data Exchange (ETDEWEB)

    McNeil, Michael A.

    2003-09-01

    The South Asian Regional Initiative for Energy (SARI/Energy) calls for a series of activities to promote Energy Efficiency Standards and Labeling (EES&L) of end use appliances in the region. In pursuit of this goal, the project supports several seminars and meetings that bring together policymakers and stakeholders from throughout the region. The purpose of these gatherings is to encourage a dialogue among participants as to the benefits and barriers associated with EES&L programs. In addition, it is the role of the program organizers to provide participants with the technical details necessary to make progress towards effective efficiency programs. One component of the initiative is to encourage the harmonization (alignment) of existing program components, and the pursuit of new programs coordinated at the regional level. In support of this goal, the report provides information aimed at motivating and enabling cooperative activities which will provide concrete benefits to programs in each country, whether well developed, or still in the initial planning stage. It should be emphasized that the underlying objective of the harmonization component of the SARI/Energy project is to increase the potential for success of EES&L programs of all countries involved, and to reduce burdens on manufacturers, exporters and importers in each country. Harmonization ''for it's own sake'' is not desirable, nor is it suggested that policymakers should bring their programs in line with international norms if doing so would present a disadvantage to their own efficiency programs, or to commercial interests within their country. If there is no such disadvantage, however, the program encourages alignment of policies and provides a forum at which this alignment can be pursued. The report covers several main topics, with varying emphasis. First, a general discussion of the motivation for an explicit policy of regional harmonization is given. Next, the current status

  10. A New Appliance for Improving the Miniscrew Stability

    Directory of Open Access Journals (Sweden)

    Nurhat Ozkalayci

    2016-01-01

    Full Text Available The aim of this study is to present a new appliance called stability leg designed as an additional anchorage providing device for increasing primary stability of orthodontic miniscrew. For this purpose, two finite element models (FEMs with two different cortical layer thicknesses of 1 mm and 2 mm are considered. In order to achieve the stability analysis, these two main models, namely, Model I and Model II, are divided into subgroups according to stability leg lengths. Two types of forces are considered. (1 First force is a constant force of 1 N which is applied to all two models. (2 Second force is defined in the range of 1–4 N. Each of 1, 2.5, and 4 N of the second force is applied with a position angle ranging from 34° to 44°. Results show that stability of a miniscrew with 5 mm leg increases primary stability of the miniscrew.

  11. Sleep apnea and occupational accidents: Are oral appliances the solution?

    Directory of Open Access Journals (Sweden)

    Maria De Lourdes Rabelo Guimarães

    2014-01-01

    Full Text Available Background: Dental practitioners have a key role in the quality of life and prevention of occupational accidents of workers with Obstructive Sleep Apnea Syndrome (OSAS. Aim: The aim of this study was to review the impact of OSAS, the Continuous Positive Airway Pressure (CPAP therapy, and the evidence regarding the use of oral appliances (OA on the health and safety of workers. Materials and Methods: Searches were conducted in MEDLINE (PubMed, Lilacs and Sci ELO. Articles published from January 1980 to June 2014 were included. Results: The research retrieved 2188 articles and 99 met the inclusion criteria. An increase in occupational accidents due to reduced vigilance and attention in snorers and patients with OSAS was observed. Such involvements were related to excessive daytime sleepiness and neurocognitive function impairments. The use of OA are less effective when compared with CPAP, but the results related to excessive sleepiness and cognitive performance showed improvements similar to CPAP. Treatments with OA showed greater patient compliance than the CPAP therapy. Conclusion: OSAS is a prevalent disorder among workers, leads to increased risk of occupational accidents, and has a significant impact on the economy. The CPAP therapy reduces the risk of occupational accidents. The OA can improve the work performance; but there is no scientific evidence associating its use with occupational accidents reduction. Future research should focus on determining the cost-effectiveness of OA as well as its influence and efficacy in preventing occupational accidents.

  12. Danish Energy Efficiency Policy

    DEFF Research Database (Denmark)

    Togeby, Mikael; Larsen, Anders; Dyhr-Mikkelsen, Kirsten

    2009-01-01

    of the entire Danish energy efficiency policy portfolio must be carried out before end 2008 and put forward for discussion among governing parties no later than February 2009. A consortium comprising Ea Energy Analyses, Niras, the Department of Society and Globalisation (Roskilde University) and 4-Fact...... was assigned with this task. The evaluation aimed to answer the crucial questions: Is the overall design of the portfolio of instruments appropriate? Does the impact of the instruments justify the costs, so that we reach the national goals in a cost efficient way? Will the current instrument portfolio be able......Ten groups of policy instruments for promoting energy efficiency are actively used in Denmark. Among these are the EU instruments such as the CO2 emissions trading scheme and labelling of appliances, labelling of all buildings, combined with national instruments such as high taxes especially...

  13. 49 CFR 238.229 - Safety appliances-general.

    Science.gov (United States)

    2010-10-01

    ... accordance with the welding procedures contained in APTA Standard SS-C&S-020-03—Standard for Passenger Rail....21. The Director of the Federal Register approves incorporation by reference of the APTA Standard...

  14. Effect of Energy Efficiency Standards on Natural Gas Prices

    Energy Technology Data Exchange (ETDEWEB)

    Carnall, Michael; Dale, Larry; Lekov, Alex

    2011-07-26

    A primary justification for the establishment of energy efficiency standards for home appliances is the existence of information deficiencies and externalities in the market for appliances. For example, when a long-term homeowner purchases a new gas-fired water heater, she will maximize the value of her purchase by comparing the life-cycle cost of ownership of available units, including both total installed cost - purchase price plus installation costs - and operating cost in the calculus. Choice of the appliance with the lowest life-cycle costs leads to the most economically efficient balance between capital cost and fuel cost. However, if the purchaser's expected period of ownership is shorter than the useful life of the appliance, or the purchaser does not pay for the fuel used by the appliance, as is often the case with rental property, fuel cost will be external to her costs, biasing her decision toward spending less on fuel efficiency and resulting in the purchase of an appliance with greater than optimal fuel usage. By imposing an efficiency standard on appliances, less efficient appliances are made unavailable, precluding less efficient purchases and reducing fuel usage. The reduction in fuel demanded by residential users affects the total demand for such fuels as natural gas, for example. Reduced demand implies that residential customers are willing to purchase less gas at each price level. That is, the demand curve, labeled D{sub 0} in Figure 1, shifts to the left to D{sub 1}. If there is no change in the supply function, the supply curve will intersect the demand curve at a lower price. Residential demand is only one component of the total demand for natural gas. It is possible that total demand will decline very little if demand in other sectors increases substantially in response to a decline in the price. If demand does decrease, modeling studies generally confirm the intuition that reductions in demand for natural gas will result in reductions

  15. Crew appliance concepts. Volume 1, appendix A: Bibliography. [manned space shuttle orbiter environmental control and life support systems

    Science.gov (United States)

    Proctor, B. W.; Reysa, R. P.; Russell, D. J.

    1975-01-01

    A review of crew appliance related literature was made to provide background engineering information for development of conceptual appliance systems for the shuttle orbiter and the modular space station. From this review, a file containing abstracts of 299 appliance-related documents coded according to subject was developed along with a computerized bibliography of 682 references. Trade studies were conducted using information from these references to determine the optimum concepts to satisfy the shuttle and space station mission requirements. An appliance system was devised for each vehicle which has minimum impact to the respective environmental control system with the smallest possible weight, volume, and electrical penalty. Engineering parameters for each appliance concept considered are presented along with the total thermal and electrical loads and weight and volume penalties for each of the optimized appliance systems.

  16. A Novel Approach to Regain Anterior Space Using Modified 2 by 3 Fixed Appliance: A Report of Two Cases.

    Science.gov (United States)

    Mohammad, Ziauddin; Cheruku, Sampath Reddy; Penmetcha, Sarada; Bagalkotkar, Apeksha; Kumari, Surabhi

    2015-10-01

    Early loss of permanent anterior teeth in growing children has a psychological impact on the child. Anterior teeth are important both aesthetically and functionally. When a permanent tooth is lost, the teeth adjacent to the created space tend to migrate into the space resulting in the space loss. Management of regaining space with the removable appliance always depends on child cooperation for using the appliance as well as for the recall visits. The advantages of fixed appliances over the removable appliances are minimal discomfort, reduced need for patient cooperation and increased control of tooth movements in all three directions of space. Thus, a short course of fixed appliance like the modified 2 by 3 fixed appliance followed by fixed functional space maintainer could be an ideal treatment option for such cases.

  17. Treatment of Class II high angle malocclusions with the Herbst appliance: a cephalometric investigation.

    Science.gov (United States)

    Schiavoni, R; Grenga, V; Macri, V

    1992-11-01

    The purpose of this study was to examine the results of treatment of Class II malocclusions by using two different designs of the Herbst appliance. Cephalometric records from lateral headplates of 19 consecutively treated Class II cases were evaluated. The headplates were taken before and after the treatment stage in which the Herbst appliance was used. The patients were divided into two groups: the first group, normohypodivergent, was treated with the Herbst appliance attached to bands; the second group, hyperdivergent, was treated with the Herbst appliance attached to acrylic splints in which a high-pull headgear was also used. The results were compared between these groups and with a control group age-matched from Bolton standards to match the changes in the Herbst samples against what might be expected in case of normal growth during similar periods of time. The results of the investigation revealed the following: (1) 9 months of treatment resulted in Class I dental arch relationships in all 19 cases; (2) the Herbst appliance attached to bands did not significantly modify the vertical growth pattern of the normohypodivergent patients; and (3) in hyperdivergent patients, the use of a Herbst appliance attached to acrylic splints in conjunction with the use of a high-pull headgear allowed a better control of the vertical dimension, as assessed by the cephalometric parameters (FA, FMA, Go-Gn-SN). The clinician should be aware of the different dentofacial changes induced in the vertical plane by different designs of the Herbst appliance to better program treatment strategy.

  18. Labeling of Energy Efficiency in China to Be Expanded to 20 Categories of Products

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Mr. Wang Ruohong,director of the Energy Efficiency Management Center of the China Institute for Standardization, expressed in the "High-efficiency and Energy-saving Electric Appliance Promotion Quarter"that compulsory labeling of energy efficiency will be continued in China on frequency-converting air-conditioners, gas heaters, electric heaters and electromagnetic ovens. By the end of the "11th Five Year", compulsory labeling of energy efficiency will be expanded to include 20 categories of products, including household appliances, automobiles, architecture, motors, and offices. Labeling in other industries will continue, but the number of levels will be reduced from the current five to three.

  19. Does the degree of advancement during functional appliance therapy matter?

    Science.gov (United States)

    Al-Kalaly, Abdullah

    2008-01-01

    The aim of this study was to assess the effect of varied degrees of mandibular advancement on condylar growth. Three hundred and thirty five 35-day-old female Sprague–Dawley rats were randomly divided into 10 experimental groups (n = 10) and five control groups (n = 5) for analysis of new bone formation and 10 experimental groups (n = 14) and five control groups (n = 14) for molecular analysis. The experimental animals were fitted with bite-jumping appliance to advance the mandible 2 and 4 mm. The rats were sacrificed on days 3, 7, 14, 21, and 30. A computer-assisted image analysing system was used to assess the quantity of new condylar bone formation. Molecular analysis utilizing real-time reverse transcription–polymerase chain reaction was used to assess the different levels of mRNA expression of different growth markers in the condyle. One-way analysis of variance (ANOVA), with a Bonferroni multiple comparison test, showed significantly more newly formed bone in the 4 mm group compared with the 2 mm and control groups on days 21 and 30 (P < 0.05). Most of the examined growth markers demonstrated a significant increase during the 4 mm advancement (P < 0.05). Indian hedgehog (Ihh) mRNA showed a 7- and 5-fold change, parathyroid hormone-related peptide (PTHrP) a 5.2- and 3-fold change and type II collagen a 9.6- and 3.7-fold change in the 4 and 2 mm advancement groups, respectively. Varied degrees of mandibular advancement result in different quantities of new bone formation and levels of expression of growth members: Ihh, PTHrP, and type II collagen. PMID:18343894

  20. Non-intrusive appliance load monitoring system based on a modern kWh-meter

    Energy Technology Data Exchange (ETDEWEB)

    Pihala, H. [VTT Energy, Espoo (Finland). Energy Systems

    1998-12-01

    Non-intrusive appliance load monitoring (NIALM) is a fairly new method to estimate load profiles of individual electric appliances in a small building, like a household, by monitoring the whole load at a single point with one recording device without sub-meters. Appliances have special electrical characteristics, the positive and negative active and reactive power changes during the time they are switched on or off. These changes are called events and are detected with a monitoring device called an event recorder. Different NIALM-concepts developed in Europe and in the United States are generally discussed. The NIALM-concept developed in this study is based on a 3-phase, power quality monitoring kWh-meter and unique load identification algorithms. This modern kWh-meter with a serial data bus to a laptop personal computer is used as die event recorder. The NIALM-concept of this presentation shows for the first time how a kWh-meter can be used at the same time for billing, power quality and appliance end-use monitoring. An essential part of the developed NIALM-system prototype is the software of load identification algorithms which runs in an off-line personal computer. These algorithms are able to identify, with a certain accuracy, both two-state and multi-state appliances. This prototype requires manual-setup in which the naming of appliances is performed. The results of the prototype NIALMS were verified in a large, single family detached house and they were compared to the results of other prototypes in France and the United States, although this comparison is difficult because of different supply systems, appliance stock and number of tested sites. Different applications of NIALM are discussed. Gathering of load research data, verification of DSM-programs, home automation, failure analysis of appliances and security surveillance of buildings are interesting areas of NIALM. Both utilities and customers can benefit from these applications. It is possible to

  1. DNA damage in oral mucosa cells of patients with fixed orthodontic appliances.

    Directory of Open Access Journals (Sweden)

    Farzin Heravi

    2013-12-01

    Full Text Available The release of toxic metal ions from orthodontic alloys has induced concerns regarding the biocompatibility of fixed appliances. This study investigated the genotoxic effect of metal appliances in a sample of patients undergoing fixed orthodontic treatment.The study included twenty-five healthy individuals requiring orthodontic therapy in both jaws. The patients were treated by stainless steel orthodontic brackets and nickel-titanium or stainless steel arch wires. The oral mucosa cells were gathered just before the appliance placement and 9 months later. The cells were centrifuged, fixed and dropped onto slides. After staining, the micronucleus (MN assay was used to determine genome alteration. The data were analyzed by paired sample t-test.The mean micronuclei frequency in the buccal mucosa was 10.6 ± 5.7 per 1000 cells before the appliance placement and 9.2 ± 6.37 per 1000 cells 9 months later. No significant difference was found in the MN count before and 9 months after therapy (p=0.336.Under the conditions used in this study, application of fixed orthodontic appliances did not expose healthy individuals to increased risk of DNA damage in oral mucosa cells.

  2. Implementationof Single Phasing, Over Voltage, Under Voltage, Protection of Three Phase Appliances without Using Microcontroller

    Directory of Open Access Journals (Sweden)

    Girish Chandra Thakur

    2015-05-01

    Full Text Available This paper tends to develop for protection for costly appliances which require three-phase AC supply for operation. Failure of any of the phases or sudden change in voltage makes the appliance prone to erratic functioning and may even lead to failure. Hence it is of paramount importance to monitor the availability of the three-phase supply and proper voltage supply and switch off the appliance in the event of failure of one or two phases or if required voltage level is not available. The power to the appliance should resume with the availability of all phases of the supply with proper voltage level. The main advantage of this protector circuit is that it protects three-phase appliances from failure of any phase as well as from fluctuation of voltage. The concept in future can be extended to developing a mechanism to send message to the authority via SMS by interfacing GSM modem. Details description of all types of faults is given below.

  3. Comparison of 2 modifications of the twin-block appliance in matched Class II samples.

    Science.gov (United States)

    Parkin, N A; McKeown, H F; Sandler, P J

    2001-06-01

    The purpose of this study was to compare the skeletal and dental changes contributing to Class II correction with 2 modifications of the Twin-block appliance: Twin-block appliances that use a labial bow (TB1) and Twin-block appliances that incorporate high-pull headgear and torquing spurs on the maxillary central incisors (TB2). After pretreatment equivalence was established, a total of 36 consecutively treated patients with the TB1 modification were compared with 27 patients treated with the TB2 modification. Both samples were treated in the same hospital department and the same technician made all the appliances. The cephalostat, digitizing package, and statistical methods were common to both groups. The results demonstrated that the addition of headgear to the appliance resulted in effective vertical and sagittal control of the maxillary complex and thus maximized the Class II skeletal correction in the TB2 sample. Use of the torquing springs resulted in less retroclination of the maxillary incisors in the TB2 sample when compared with the TB1 sample; however, this difference did not reach the level of statistical significance.

  4. Class II: a comparison of activator and activator headgear combination appliances.

    Science.gov (United States)

    Oztürk, Y; Tankuter, N

    1994-04-01

    The purpose of this study was to evaluate skeletal and dental effects of activator and activator high-pull headgear combination appliances on growing patients with Class II, division 1 malocclusion. The material consisted of pre- and post-treatment cephalograms of 17 boys and 20 girls. Seventeen patients (eight male and nine female) were treated with an activator, the remaining 20 (9 male and 11 female) were treated with an activator high-pull headgear combination (AHGC) appliance. Changes due to treatment were compared with a group of 19 (nine male and ten female) untreated children. ANB angle was significantly reduced and mandibular growth development was favourable in both treatment groups. The AHGC appliance was more effective in the reduction of the maxillary prognathism. An increase of the anterior facial height and clockwise rotation of the occlusal plane was observed in the patients treated with activator appliance. The cant of the mandibular plane remained stable during both treatment periods. On the other hand, the forward displacement of the upper first molars was reduced significantly and the axial inclination of the lower incisors was controlled much better with the AHGC appliance.

  5. Self-reported electrical appliance use and risk of adult brain tumors.

    Science.gov (United States)

    Kleinerman, Ruth A; Linet, Martha S; Hatch, Elizabeth E; Tarone, Robert E; Black, Peter M; Selker, Robert G; Shapiro, William R; Fine, Howard A; Inskip, Peter D

    2005-01-15

    Electrical appliances produce the highest intensity exposures to residential extremely low frequency electromagnetic fields. The authors investigated whether appliances may be associated with adult brain tumors in a hospital-based case-control study at three centers in the United States from 1994 to 1998. A total of 410 glioma, 178 meningioma, and 90 acoustic neuroma cases and 686 controls responded to a self-administered questionnaire about 14 electrical appliances. There was little evidence of association between brain tumors and curling iron, heating pad, vibrating massager, electric blanket, heated water bed, sound system, computer, television, humidifier, microwave oven, and electric stove. Ever use of hair dryers was associated with glioma (odds ratio = 1.7, 95% confidence interval: 1.1, 2.5), but there was no evidence of increasing risk with increasing amount of use. In men, meningioma was associated with electric shaver use (odds ratio = 10.9, 95% confidence interval: 2.3, 50), and odds ratios increased with cumulative minutes of use, although they were based on only two nonexposed cases. Recall bias for appliances used regularly near the head or chance may provide an alternative explanation for the observed associations. Overall, results indicate that extremely low frequency electromagnetic fields from commonly used household appliances are unlikely to increase the risk of brain tumors.

  6. 76 FR 61288 - Efficiency and Renewables Advisory Committee, Appliance Standards Subcommittee Negotiated...

    Science.gov (United States)

    2011-10-04

    .... ADDRESSES: National Rural Electric Cooperative Association, 4301 Wilson Blvd., Arlington, VA 22203. FOR..., and affected parties when drafting the proposed regulation that is then presented to the public for... issues. A rule drafted by negotiation with informed and affected parties is more likely to...

  7. 76 FR 55834 - Efficiency and Renewables Advisory Committee, Appliance Standards Subcommittee, Negotiated...

    Science.gov (United States)

    2011-09-09

    ...: Richard Anderson (Fayetteville PWC) Tim Ballo (Earthjustice) Scott Beck (Lakeview Metals) John Caskey...) Michael Hyland (APPA) David Millure (Metglas) Steve Nadel (ACEEE) Wes Patterson (ABB) Eric Petersen...

  8. Costs and benefits related to the use of tax incentives for energy-efficient appliances

    OpenAIRE

    Bio Intelligence Service

    2008-01-01

    The study examines four products with high energy-saving potential: refrigerators, washing machines, boilers and compact fluorescent lamps. The cost-benefit analysis is done in a comparative perspective so that the costs and benefits of energy taxation and a regulatory measure are calculated for the same products. The data from four different Member States (Denmark, France, Italy and Poland) are used in the analysis.

  9. A Study on Efficient Energy Use for Household Appliances in Malawi

    African Journals Online (AJOL)

    ... state electric meters on the other hand display the power used on an LCD or LED screen. ... 21” CRT Colour TV (Orion) ... Standard Incandescent light bulb: × 8 6.40 ... can get a wide range of low-energy light bulbs that use about a fifth of the ...

  10. 31 CFR 205.14 - When does Federal interest liability accrue?

    Science.gov (United States)

    2010-07-01

    ... (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE RULES AND PROCEDURES FOR EFFICIENT FEDERAL-STATE FUNDS TRANSFERS Rules Applicable to Federal Assistance Programs Included in...

  11. Danish Energy Efficiency Policy

    DEFF Research Database (Denmark)

    Togeby, Mikael; Larsen, Anders; Dyhr-Mikkelsen, Kirsten

    2009-01-01

    Ten groups of policy instruments for promoting energy efficiency are actively used in Denmark. Among these are the EU instruments such as the CO2 emissions trading scheme and labelling of appliances, labelling of all buildings, combined with national instruments such as high taxes especially...... on households and the public sector, obligations for energy companies (electricity, natural gas, district heating, and oil) to deliver documented savings, strict building codes, special instructions for the public sector, and an Electricity Saving Trust. A political agreement from 2005 states that an evaluation...... of the entire Danish energy efficiency policy portfolio must be carried out before end 2008 and put forward for discussion among governing parties no later than February 2009. A consortium comprising Ea Energy Analyses, Niras, the Department of Society and Globalisation (Roskilde University) and 4-Fact...

  12. Basic Ideas on the Development of Safe Service Life Standard for Household Appliances

    Institute of Scientific and Technical Information of China (English)

    Zhu Yan

    2011-01-01

    GB/T 21097.1 General Rules about the Safe Service Life and Recycling of Household and Similar Electrical Appliances has been promulgated and implemented.The development of the standard has gone through a few main stages,including basic framework,fundamental requirements,supplementation of details and actual implementation.In China,the safety standards for household appliances are basically identical with IEC 60335 standards and cover a wide range of products.Basically,the standards have got in line with international level and have been identically applied for several years.However,there have been no corresponding standards or specific rules concerning the safe service life of household appliances in the international community including industrially developed countries.

  13. Fixed Lingual Mandibular Growth Modificator: a new appliance for Class II correction

    Directory of Open Access Journals (Sweden)

    Osama Hasan Alali

    2013-08-01

    Full Text Available INTRODUCTION: This article demonstrates the description and use of a new appliance for Class II correction. MATERIAL AND METHODS: A case report of a 10-year 5 month-old girl who presented with a skeletally-based Class II division 1 malocclusion (ANB = 6.5º on a slightly low-angle pattern, with ML-NSL angle of 30º and ML-NL angle of 22.5º. Overjet was increased (7 mm and associated with a deep bite. RESULTS: Overjet and overbite reduction was undertaken with the new appliance, Fixed Lingual Mandibular Growth Modificator (FLMGM. CONCLUSION: FLMGM may be effective in stimulating the growth of the mandible and correcting skeletal Class II malocclusions. Clinicians can benefit from the unique clinical advantages that FLMGM provides, such as easy handling and full integration with bracketed appliance at any phase.

  14. Fixed lingual mandibular growth modificator: a new appliance for class II correction.

    Science.gov (United States)

    Alali, Osama Hasan

    2013-01-01

    This article demonstrates the description and use of a new appliance for Class II correction. A case report of a 10-year 5 month-old girl who presented with a skeletally-based Class II division 1 malocclusion (ANB = 6.5°) on a slightly low-angle pattern, with ML-NSL angle of 30° and ML-NL angle of 22.5°. Overjet was increased (7 mm) and associated with a deep bite. Overjet and overbite reduction was undertaken with the new appliance, Fixed Lingual Mandibular Growth Modificator (FLMGM). FLMGM may be effective in stimulating the growth of the mandible and correcting skeletal Class II malocclusions. Clinicians can benefit from the unique clinical advantages that FLMGM provides, such as easy handling and full integration with bracketed appliance at any phase.

  15. Modeling of GE Appliances in GridLAB-D: Peak Demand Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Vyakaranam, Bharat GNVSR; Prakash Kumar, Nirupama; Leistritz, Sean M.; Parker, Graham B.

    2012-04-29

    The widespread adoption of demand response enabled appliances and thermostats can result in significant reduction to peak electrical demand and provide potential grid stabilization benefits. GE has developed a line of appliances that will have the capability of offering several levels of demand reduction actions based on information from the utility grid, often in the form of price. However due to a number of factors, including the number of demand response enabled appliances available at any given time, the reduction of diversity factor due to the synchronizing control signal, and the percentage of consumers who may override the utility signal, it can be difficult to predict the aggregate response of a large number of residences. The effects of these behaviors can be modeled and simulated in open-source software, GridLAB-D, including evaluation of appliance controls, improvement to current algorithms, and development of aggregate control methodologies. This report is the first in a series of three reports describing the potential of GE's demand response enabled appliances to provide benefits to the utility grid. The first report will describe the modeling methodology used to represent the GE appliances in the GridLAB-D simulation environment and the estimated potential for peak demand reduction at various deployment levels. The second and third reports will explore the potential of aggregated group actions to positively impact grid stability, including frequency and voltage regulation and spinning reserves, and the impacts on distribution feeder voltage regulation, including mitigation of fluctuations caused by high penetration of photovoltaic distributed generation and the effects on volt-var control schemes.

  16. Low level laser intensity improves propulsive appliance effects on condylar cartilage

    Science.gov (United States)

    Figueiredo, Augusto C. R.; dos Santos, Fernanda C. A.; Capeletti, Lucas R.; Galdino, Marcos V. B.; Araújo, Renan V.; Marques, Mara R.

    2012-01-01

    Mandibular propulsive appliance (MPA) stimulates cell proliferation and gene expression on mandible condylar cartilage (Marques et al., 2008). However, its association with low level laser therapy (LLLT) is unknown. This study evaluated the effects of LLLT associated to MPA on mandibular condyle. Twenty Wistar rats were divided into four groups. Group I received any treatment. Group II was bilaterally irradiated on temporomandibular joint with 10 J/cm2 low level laser (780nm, 40mW and 10s) on alternate days. Group III used the propulsive appliance for ten hours daily and Group IV used the appliance daily and was irradiated on alternate days. After 15 days the animals were killed by lethal doses of anesthetics. The condyles were fixed in Methacarn solution and decalcified in 4.13% EDTA solution for 30 days. Seriate saggital 5 μm-thick sections were stained by the hematoxilin-eosin method. Morphological and morphometric analyses were performed to measure the length and the height of the mandibular condyle, the thickness of the condilar cartilage and the bone mass. Results were expressed as mean +/- standard deviation (one-way ANOVA, Tukey's post-test.) The appliance increased all measures compared to the control group, except bone mass. Alone, LLLT had no effects on all measures, however, the association of the appliance with the LLLT increased condylar cartilage and bone mass significantly compared to the others groups. These results suggest that LLLT improves the effects of mandibular propulsive appliance in the condylar cartilage growth and formation of bone mass.

  17. Changes in subgingival microflora after placement and removal of fixed orthodontic appliances

    Directory of Open Access Journals (Sweden)

    Živković-Sandić Marija

    2014-01-01

    Full Text Available Introduction. The placement of fixed orthodontic appliances may lead to increased plaque accumulation and changes in subgingival microflora. Objective. The aim of this study was to examine the changes in frequency of subgingival microflora that occur after placement and removal of fixed orthodontic appliance using polymerase chain reaction (PCR. Methods. This study included 33 orthodontic patients, who were divided into two groups. Subgingival plaque samples were collected from the right upper incisor (U1 and right upper first molar (U6. In group A, the samples were taken three times: before placement appliance (T1, after one month (T2, and after 3 months (T3. In group B the samples were also taken three times: before appliance removal (T1, after one month (T2, and after three months (T3. PCR method was used to determine the presence of P. gingivalis, A. actinomycetemcomitans, T. forsythia, and P. intermedia. Results. In group A the frequency of P. gingivalis showed statistically significant decrease at U1 (p=0.049 and U6 (p=0.008, from T1 to T2, and at U1 (p=0.048 from T1 to T3. In group B only the frequency of T. forsythia showed a statistically significant decrease, at U6 (T1 vs. T2, p=0.004; T1 vs. T3, p=0.0003. Regarding other analyzed bacteria, changes in the presence were noticed but no statistical significance was found. Conclusion. Placement of fixed appliances may have an impact on subgingival microflora, but in the first months after the placement and removal of the appliance changes were not significant, probably due to good oral hygiene. [Projekat Ministarstva nauke Republike Srbije, br. 175075

  18. Impact of functional mandibular advancement appliances on the temporomandibular joint - a systematic review

    Science.gov (United States)

    Ivorra-Carbonell, Laura; Montiel-Company, José-María; Almerich-Silla, José-Manuel; Paredes-Gallardo, Vanessa

    2016-01-01

    Background Although many orthodontists have no doubts about the effectiveness of functional appliances for mandibular advancement, the impact on the temporomandibular joint (TMJ) is still in dispute. The objective of this systematic review is to examine the main effects on the TMJ of using functional appliances, both in healthy patients and in patients with a pre-existing disorder. Material and Methods A systematic review of the literature was conducted in accordance with the PRISMA guidelines. Only systematic reviews, meta-analyses, randomized clinical trials (RCTs), case-control studies and cohort studies were included. A detailed language-independent electronic search was conducted in the Pubmed, Scopus, Cochrane Library and Embase databases. All studies published between 2000 and 2015 were included. Results A total of 401 articles were identified. Of these, 159 were duplicates and were excluded. On reading the title and abstract, 213 articles were excluded because they did not answer the research question, leaving a total of 29 articles. These articles were read and assessed. Following critical reading of the full text, eight articles were excluded: seven because they were considered of low quality and one because it published redundant data. As a result, 21 articles were included. Conclusions After treatment with functional appliances, the condyle was found to be in a more advanced position, with remodelling of the condyle and adaptation of the morphology of the glenoid fossa. No significant adverse effects on the TMJ were observed in healthy patients and the appliances could improve joints that initially presented forward dislocation of the disk. Key words:Temporomandibular joint, TMJ, orthodontic appliances, functional, mandibular advancement, herbst appliance, bionator. PMID:27475694

  19. A retrospective cephalometric study of the effects of the Harvold appliance in the treatment of 20 patients with a Class II division 1 malocclusion.

    LENUS (Irish Health Repository)

    McNamara, C M

    1989-01-01

    The aim of the study was to investigate the effects of the Harvold appliance on the dentoalveolar and skeletal structures and note the changes produced. The primary impact of the Harvold appliance as shown in this study was dentoalveolar.

  20. Assessment of Atmospheric Air in the Regions of the Central Federal District in the Framework of the Fundamental Approach to Assessment of Efficiency of Activity of Subjects of Socio-Ecological-Economic Systems Management

    Directory of Open Access Journals (Sweden)

    Roman Aleksandrovich Zhukov

    2016-10-01

    Full Text Available The author proposes the fundamental approach to the assessment of the effectiveness of the managing subjects, which contains logically related steps of complex systems analysis and synthesis solutions to alignment asymmetry and conditions for sustainable development of regional social, ecological and economic systems (SEES, air condition in the regions of the Central Federal District is studied. The research process involves the formation of a generalized performance indicator in the chosen direction of the plurality of partial indicators, taking into account their mutual influence through the pair of correlation coefficients and is defined as the ratio of the actual value to the standard. The standard was calculated according to the effective model of communication features with the factors (conditions of SEES functioning, built with the help of correlation and regression analysis. As private performance indicators, the author selects standardized and normalized indicators of pollutant emissions into the atmospheric air and trapping of atmospheric air pollutants from stationary sources, taking into account the territorial socio-ecological and economic conditions. The efficiency of activity of subjects of management regarding the use of environmental expenditures is calculated. The effectiveness of the change is calculated as the ratio of performance indicators to the change of factor variables. The synthesis step is to search for the desired values of controlled factors in which SEES performance indicators would be compliant with the law by solving a nonlinear optimization problem with constraints. In the study, for a number of regions the necessary changes of environmental costs are presented, which, in turn, can be used as practical recommendations for various levels of state administration.

  1. Oral Appliance Versus Continuous Positive Airway Pressure in Obstructive Sleep Apnea Syndrome : A 2-Year Follow-up

    NARCIS (Netherlands)

    Doff, Michiel H. J.; Hoekema, Aarnoud; Wijkstra, Peter J.; van der Hoeven, Johannes H.; Slater, James J. R. Huddleston; de Bont, Lambert G. M.; Stegenga, Boudewijn

    2013-01-01

    Study Objectives: Oral appliance therapy has emerged as an important alternative to continuous positive airway pressure (CPAP) in treating patients with obstructive sleep apnea syndrome (OSAS). In this study we report about the subjective and objective treatment outcome of oral appliance therapy and

  2. 78 FR 28190 - Authorization of Production Activity; Foreign-Trade Subzone 29C; GE Appliances (Electric Water...

    Science.gov (United States)

    2013-05-14

    ... Foreign-Trade Zones Board Authorization of Production Activity; Foreign-Trade Subzone 29C; GE Appliances (Electric Water Heaters); Louisville, Kentucky On January 7, 2013, GE Appliances, operator of Subzone 29C in Louisville, Kentucky, submitted a notification of proposed production activity to the Foreign-Trade Zones...

  3. 78 FR 21594 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Final Results...

    Science.gov (United States)

    2013-04-11

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of...'') has completed its administrative review of the countervailing duty (``CVD'') order on certain kitchen... rebuttal brief on December 17, 2012. \\1\\ See Certain Kitchen Appliance Shelving and Racks From the...

  4. 77 FR 21744 - Certain Kitchen Appliance Shelving and Racks From the People's Republic of China: Final Results...

    Science.gov (United States)

    2012-04-11

    ... International Trade Administration Certain Kitchen Appliance Shelving and Racks From the People's Republic of... Department'') has completed its administrative review of the countervailable duty order on certain kitchen appliance shelving and racks (``Kitchen Racks'') from the People's Republic of China (``PRC'') for...

  5. Operations manual for the patient assist device. [to handle electrical appliances

    Science.gov (United States)

    Schrader, M. A.

    1973-01-01

    Quadriplegic patients and multiple amputee patients are almost totally dependent on nursing personnel for any activities or interests in which they participate. A patient assist device is reported which provides patient control over electrical devices in his environment. The patient operates three switches to acquire control over a desired electrical appliance. The type switches employed are chosen to conform to patient capabilities, even when such capabilities are as limited as eye or head movements. The switch operations are sensed and converted into command signals by the patient assist device to control ten electrical appliances simulataneously and independently.

  6. Modified Thurow appliance: a clinical alternative for correcting skeletal open bite.

    Science.gov (United States)

    Stuani, Maria Bernadete Sasso; Stuani, Andréa Sasso; Stuani, Adriana Sasso

    2005-07-01

    Open bite malocclusion is frequently discussed in orthodontics; diagnosis, treatment, and retention can be difficult because this malocclusion has numerous correlated etiological factors. The earlier this malocclusion is corrected, the better the prognosis will be, especially when the problem is skeletal. This article presents a patient with skeletal open bite who was treated in the mixed dentition with an orthodontic appliance that included an acrylic occlusal splint and an expansion screw, based on the original Thurow appliance, to guide the vertical force against the posterior teeth and the alveolar process.

  7. Fixed Lingual Mandibular Growth Modificator: a new appliance for Class II correction

    OpenAIRE

    Osama Hasan Alali

    2013-01-01

    INTRODUCTION: This article demonstrates the description and use of a new appliance for Class II correction. MATERIAL AND METHODS: A case report of a 10-year 5 month-old girl who presented with a skeletally-based Class II division 1 malocclusion (ANB = 6.5º) on a slightly low-angle pattern, with ML-NSL angle of 30º and ML-NL angle of 22.5º. Overjet was increased (7 mm) and associated with a deep bite. RESULTS: Overjet and overbite reduction was undertaken with the new appliance, Fixed Lingual ...

  8. Modified quad helix appliance for thumb sucking and cross bite correction

    Directory of Open Access Journals (Sweden)

    C Vinay

    2013-01-01

    Full Text Available Digit sucking habit is a learned pattern of behavior commonly seen in children of preschool age. Prolonged digit sucking beyond the preschool age, lead to the development of malocclusion such as anterior open bite, maxillary constriction and posterior crossbite. Treatment strategies include interception of habit and correction of the malocclusion. The present case report describes a modified quad helix appliance used successfully in a 9-year-old child to intercept thumb sucking habit and simultaneous correction of posterior crossbite. The appliance has the advantage of easy fabrication, being versatile and more patients compliant.

  9. Energy Efficiency Policy Developments: September 2011-September 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    The purpose of this report is to highlight energy efficiency policy action and planning in IEA member and key non-member countries over the period from September 2011 to September 2012. The report provides an overview of energy efficiency policy developments across the seven sectors covered by the IEA 25 Energy Efficiency Policy Recommendations (25 EEPR) – Cross-sectoral activities, Buildings, Appliances and Equipment, Lighting, Transport, Industry and Energy Providers.

  10. Environmental effects and energy efficiency in building design - a green building approach. Pt. 1. Energy efficiency techniques

    Energy Technology Data Exchange (ETDEWEB)

    Egle, C.; Pitts, G.C.

    1993-12-31

    A research report describes the energy efficiency techniques to be employed in designing a building which is ``green``. Topics covered include building fabric performance, ventilation and infiltration, passive solar design, heating systems and controls, hot and cold water provision, lighting and electrical appliances. (UK)

  11. Treatment of temporomandibular disorders with a combination of hard acrylic stabilisation appliance and a soft appliance in the opposing jaw. A retro- and prospective study.

    Science.gov (United States)

    Lindfors, Erik; Nilsson, Håkan; Helkimo, Martti; Magnusson, Tomas

    2008-01-01

    The aim of this study was to evaluate the treatment effect of a combined treatment with a stabilisation appliance and a soft appliance in the opposing jaw in patients refractory to previous TMD treatment. During a 5-year-period, 2001-2005, a total of 98 patients received the combined treatment at the Department of Stomatognathic Physiology, the Institute for Postgraduate Dental Education, Jönköping, Sweden. Before the patients received the combined treatment, they had already been given several different TMD treatments during a long period of time, either before referral or at the specialist clinic, with only minor or no effect on their TMD symptoms. The patients were followed prospectively (n=10), or analysed retrospectively (n=88). The data registered were gender, age, main indication for TMD treatment, number of visits to the clinic before and after the introduction of the combined treatment, as well as according to a clinical (Di) and anamnestic (Ai) dysfunction index. The most common causes for treatment in the retrospective material were problems of muscular origin and problems of both muscular and TMJ origin. In the prospective material, most of the patients had mainly muscular symptoms. Both the clinical and anamnestic dysfunction index decreased statistically significantly in the retrospective material after the introduction of the combined treatment. There was a numerical improvement of both indices also in the prospective material. In conclusion, the present investigation showed that a combined treatment with a hard acrylic stabilisation appliance and a soft appliance in the opposing jaw seems to give a remarkable improvement of TMD signs and symptoms in apparently therapy resistant TMD patients. General conclusions should, however, be made with caution due to the fact that the study did not include any control group. There is an obvious need for randomized controlled studies concerning the efficacy and effectiveness of the combined treatment presented

  12. Experimental determination of demand side management potential of wet appliances in the Netherlands

    NARCIS (Netherlands)

    Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

    2017-01-01

    The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

  13. Experimental determination of demand side management potential of wet appliances in the Netherlands

    NARCIS (Netherlands)

    Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

    2017-01-01

    The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

  14. Cone beam computed tomography study of apical root resorption induced by Herbst appliance

    Directory of Open Access Journals (Sweden)

    João Paulo SCHWARTZ

    2015-10-01

    Full Text Available Objective This study evaluated the frequency of root resorption during the orthodontic treatment with Herbst appliance by Cone Beam Computed Tomography (CBCT.Material and Methods The sample comprised 23 patients (11 men, 12 women; mean ages 15.76±1.75 years with Class II division 1 malocclusion, treated with Herbst appliance. CBCT was obtained before treatment (T0 and after Herbst treatment (T1. All the dental roots, except third molars, were evaluated, and apical root resorption was determined using the axial guided navigation method. Paired t-tests and Wilcoxon T Test were used to compare the dependent samples in parametric and nonparametric cases, respectively. Chi-Square Test with Yates’ correction was used to evaluate the relationship between apical root resorption and gender. Results were considered at a significance level of 5%.Results Apical resorption was detected by CBCT in 57.96% of 980 roots that underwent Herbst appliance treatment. All patients had minimal resorption and there was no statistical significance between the genders.Conclusion CBCT three-dimensional evaluation showed association between Herbst appliance and minimal apical root resorption, mostly in the anchoring teeth, without clinical significance.

  15. Research and Development of Natural Draft Ultra-Low Emissions Burners for Gas Appliances

    Energy Technology Data Exchange (ETDEWEB)

    Therkelsen, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cheng, Robert [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sholes, Darren [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-08-31

    Combustion systems used in residential and commercial cooking appliances must be robust and easy to use while meeting air quality standards. Current air quality standards for cooking appliances are far greater than other stationary combustion equipment. By developing an advanced low emission combustion system for cooking appliances, the air quality impacts from these devices can be reduced. This project adapted the Lawrence Berkeley National Laboratory (LBNL) Ring-Stabilizer Burner combustion technology for residential and commercial natural gas fired cooking appliances (such as ovens, ranges, and cooktops). LBNL originally developed the Ring-Stabilizer Burner for a NASA funded microgravity experiment. This natural draft combustion technology reduces NOx emissions significantly below current SCAQMD emissions standards without post combustion treatment. Additionally, the Ring-Stabilizer Burner technology does not require the assistance of a blower to achieve an ultra-low emission lean premix flame. The research team evaluated the Ring-Stabilizer Burner and fabricated the most promising designs based on their emissions and turndown.

  16. Effect of fixed orthodontic appliances on salivary microbial parameters at 6 months : a controlled observational study

    NARCIS (Netherlands)

    Maret, Delphine; Marchal-Sixou, Christine; Vergnes, Jean-Noel; Hamel, Olivier; Georgelin-Gurgel, Marie; Van Der Sluis, Lucas; Sixou, Michel

    2014-01-01

    Objective: The aim of this study was to assess the microbial changes in children with fixed orthodontic appliances compared with a control group of children without orthodontic treatment. Material and Methods: Ninety-five children, aged between 12 and 16 years, participated in this study. Forty-eigh

  17. Space Maintenance with an Innovative “Tube and Loop” Space Maintainer (Nikhil Appliance)

    Science.gov (United States)

    Grover, Jyotika; Panthri, Prerna

    2016-01-01

    ABSTRACT Despite the best efforts in prevention, premature loss of primary teeth continues to be a common problem in pediatric dentistry, resulting in disruption of arch integrity and adversely affecting the proper alignment of permanent successors. Space maintainers (SMs) are special appliances used for maintaining space created due to premature loss of primary teeth. Band and loop SM is mostly indicated for the premature loss of single primary molar, but this appliance has a number of limitations both for operators and for patients. Presented in this article is an innovative “Tube and Loop” SM (Nikhil appliance) which offers several advantages over the conventional band and loop SM. It is not only easy and quick to fabricate but can also be completed in a single sitting and cumbersome steps like impression making and laboratory procedures namely soldering are eliminated. How to cite this article: Srivastava N, Grover J, Panthri P. Space Maintenance with an Innovative “Tube and Loop” Space Maintainer (Nikhil Appliance). Int J Clin Pediatr Dent 2016;9(1):86-89. PMID:27274163

  18. Cone beam computed tomography study of apical root resorption induced by Herbst appliance

    Science.gov (United States)

    SCHWARTZ, João Paulo; RAVELI, Taísa Boamorte; ALMEIDA, Kélei Cristina de Mathias; SCHWARTZ-FILHO, Humberto Osvaldo; RAVELI, Dirceu Barnabé

    2015-01-01

    Objective This study evaluated the frequency of root resorption during the orthodontic treatment with Herbst appliance by Cone Beam Computed Tomography (CBCT). Material and Methods The sample comprised 23 patients (11 men, 12 women; mean ages 15.76±1.75 years) with Class II division 1 malocclusion, treated with Herbst appliance. CBCT was obtained before treatment (T0) and after Herbst treatment (T1). All the dental roots, except third molars, were evaluated, and apical root resorption was determined using the axial guided navigation method. Paired t-tests and Wilcoxon T Test were used to compare the dependent samples in parametric and nonparametric cases, respectively. Chi-Square Test with Yates’ correction was used to evaluate the relationship between apical root resorption and gender. Results were considered at a significance level of 5%. Results Apical resorption was detected by CBCT in 57.96% of 980 roots that underwent Herbst appliance treatment. All patients had minimal resorption and there was no statistical significance between the genders. Conclusion CBCT three-dimensional evaluation showed association between Herbst appliance and minimal apical root resorption, mostly in the anchoring teeth, without clinical significance. PMID:26537718

  19. “Surprise Gift” Purchases of Small Electric Appliances: A Pilot Study

    NARCIS (Netherlands)

    J. Vanhamme (Joëlle); C.J.P.M. de Bont (Cees)

    2005-01-01

    textabstractUnderstanding decision-making processes for gifts is of strategic importance for companies selling small electrical appliances as gifts account for a large part of their sales. Among all gifts, the ones that are surprising are the most valued by recipients. However, research about

  20. 77 FR 25747 - Certain Incremental Dental Positioning Adjustment Appliances and Methods of Producing Same...

    Science.gov (United States)

    2012-05-01

    ... COMMISSION Certain Incremental Dental Positioning Adjustment Appliances and Methods of Producing Same; Notice... importation, and the sale within the United States after importation of certain incremental dental positioning... importing, offering for sale, and selling for importation in the United States incremental dental...

  1. The stoma appliances market in five European countries: a comparative analysis.

    Science.gov (United States)

    Cornago, Dante; Garattini, Livio

    2002-01-01

    This comparative exercise analysed the domestic market for stoma appliances in five European countries--Denmark, France, Germany, Italy and the United Kingdom. National legislation, prescription procedures, delivery modalities and the market were investigated in each country. The analysis involved reviewing national and international literature on stoma appliances and interviewing a selected expert panel of market operators in each country comprising at least one health authority representative, one distributor of medical devices and one manufacturer. No specific relationship was found between the health care system framework and the stoma market, except for a greater inclination towards home care in national health services. All five countries reimburse stoma bags, but the distribution of these appliances varies widely, ranging from Denmark, where home delivery is mandatory, to Italy, where any channel can be used. The comparative analysis underlined two important features of the stoma bag market: the discretion of enterostomists in directing patients towards a specific brand of bags, and the patients' high brand loyalty. Despite that, the analysis did not identify any single country that could be considered a benchmark for stoma bag regulation. Each country deals with stoma appliances in different ways, making this a very fragmented market.

  2. Full 3-dimensional digital workflow for multicomponent dental appliances A proof of concept

    NARCIS (Netherlands)

    Meer, van der Joerd; Vissink, Arjan; Ren, Yijin

    Background. The authors used a 3-dimensional (3D) printer and a bending robot to produce a multicomponent dental appliance to assess whether 3D digital models of the dentition are applicable for a full digital workflow. Methods. The authors scanned a volunteer's dentition with an intraoral scanner

  3. Pre-directional appliance: A new approach to correct shifted premaxilla in bilateral cleft cases

    Directory of Open Access Journals (Sweden)

    P S Daigavane

    2011-01-01

    Full Text Available Management of bilateral cleft lip and palate cases is a challenging task, and if the premaxilla is shifted to either side, it poses a problem for the surgeon to operate and also for the orthodontist to do the orthodontic alignment. The aim of this study was to reposition the shifted premaxilla for better retraction with presurgical infant orthopedics, thus reducing the tissue tension and further scarring which have detrimental effects on maxillary growth. The innovative technique with pre-directional (PD appliance is easy to fabricate and use and works in this direction. Acrylic, springs, permasoft liner, elastics, retentive tapes. Previous approach for the shifted premaxilla was more focused on the surgical correction. In adults, surgery with osteotomy is the only option, with its own limitations and disadvantages, in repositioning the shifted premaxilla. Thus, PD appliance aids to correct the shifted premaxilla in presurgical molding stage. The premaxilla was thus shifted 5.5 mm to the left side, with premaxilla in facial symmetry, with the PD appliance. Presurgical orthopedics with PD appliance is worth in infants with shifted premaxilla in bilateral clefts cases.

  4. Measure Guideline: Combustion Safety for Natural Draft Appliances Using Indoor Air

    Energy Technology Data Exchange (ETDEWEB)

    Brand, L. [Partnership for Advanced Residential Retrofit, Des Plaines, IL (United States)

    2014-04-01

    This measure guideline covers how to assess and carry out the combustion safety procedures for appliances and heating equipment that uses indoor air for combustion in low-rise residential buildings. Only appliances installed in the living space, or in an area freely communicating with the living space, vented alone or in tandem with another appliance are considered here. A separate measure guideline addresses combustion appliances located either within the living space in enclosed closets or side rooms or outside the living space in an adjacent area like an attic or garage that use outdoor air for combustion. This document is for inspectors, auditors, and technicians working in homes where energy upgrades are being conducted whether or not air infiltration control is included in the package of measures being applied. In the indoor combustion air case, guidelines summarized here are based on language provided in several of the codes to establish minimum requirements for the space using simplified prescriptive measures. In addition, building performance testing procedures are provided by testing agencies. The codes in combination with the test procedures offer comprehensive combustion safety coverage to address safety concerns, allowing inexperienced residential energy retrofit inspectors to effectively address combustion safety issues and allow energy retrofits to proceed.

  5. Microimplant-assisted rapid palatal expansion appliance to orthopedically correct transverse maxillary deficiency in an adult.

    Science.gov (United States)

    Carlson, Chuck; Sung, Jay; McComb, Ryan W; Machado, Andre Wilson; Moon, Won

    2016-05-01

    This case report describes the use of a microimplant-assisted rapid palatal expansion (MARPE) appliance to orthopedically correct a transverse maxillary deficiency in an adult patient. Expansion forces transmitted through the teeth in traditional rapid palatal expansion appliances create unwanted dental effects rather than true skeletal expansion, particularly in older patients with more rigid interdigitation of the midpalatal suture. This 19-year-old patient had maxillary constriction with a unilateral posterior crossbite. A MARPE appliance secured to the palatal bones with 4 microimplants was expanded by 10 mm. Pre-MARPE and post-MARPE cone-beam computed tomography cross sections demonstrated 4 to 6 mm of expansion of the maxillofacial structures, including the zygoma and nasal bone area, and widening of the circummaxillary sutures. Minor buccal tipping of the dentition was observed, but the integrity of the alveolar bone was preserved. This report demonstrates that careful design and application of the MARPE appliance can achieve successful transverse expansion of the maxilla and the surrounding structures in a patient beyond the age typically considered acceptable for traditional rapid palatal expansion.

  6. Application of shape changing smart materials in household appliances: A fragmented and inconsistent uptake

    NARCIS (Netherlands)

    Bin Kassim, A.; Horvath, I.; Gerritsen, B.H.M.

    2014-01-01

    Shape changing smart materials (SCSM) have a wide range of applications, supporting product functions through material features. Surprisingly, their application in consumer durables such as household appliances is not as expected. This phenomenon could be related to a possible SCSM knowledge gap amo

  7. Space Maintenance with an Innovative "Tube and Loop" Space Maintainer (Nikhil Appliance).

    Science.gov (United States)

    Srivastava, Nikhil; Grover, Jyotika; Panthri, Prerna

    2016-01-01

    Despite the best efforts in prevention, premature loss of primary teeth continues to be a common problem in pediatric dentistry, resulting in disruption of arch integrity and adversely affecting the proper alignment of permanent successors. Space maintainers (SMs) are special appliances used for maintaining space created due to premature loss of primary teeth. Band and loop SM is mostly indicated for the premature loss of single primary molar, but this appliance has a number of limitations both for operators and for patients. Presented in this article is an innovative "Tube and Loop" SM (Nikhil appliance) which offers several advantages over the conventional band and loop SM. It is not only easy and quick to fabricate but can also be completed in a single sitting and cumbersome steps like impression making and laboratory procedures namely soldering are eliminated. How to cite this article: Srivastava N, Grover J, Panthri P. Space Maintenance with an Innovative "Tube and Loop" Space Maintainer (Nikhil Appliance). Int J Clin Pediatr Dent 2016;9(1):86-89.

  8. Treatment effects of Fränkel, activator and extraoral traction appliances.

    Science.gov (United States)

    Righellis, E G

    1983-04-01

    The effects of the Fränkel appliance on the treatment of Class II, Division 1 malocclusion were compared with the activator, high-pull headgear, cervical traction and a control group. A sample of 16 Fränkel cases treated in the mixed dentition was tested in four craniofacial areas, with findings as follows: a. Maxillae, no significant horizontal effect b. Mandibular length, significantly increased c. Lower face height, widely variable effects. d. Less upper molar eruption and more lower molar eruption. Although the findings of this study should be interpreted as tentative, they do show the Fränkel appliance to have some different mean effects on the craniofacial complex. Variability is a most important aspect of the findings of this study. Future studies must deal not only with mean changes, but with the Fränkel appliance's variable effects on differential individuals. Optimal application of this appliance requires judgment in case selection and careful analysis of progress, using adequate follow-up records and a firm knowledge of normal growth and development of the craniofacial complex.

  9. Distributed demand side management via smart appliances contributing to frequency control

    Institute of Scientific and Technical Information of China (English)

    ZHANG Wei-chen

    2015-01-01

    Nowadays renewable energy has become a trend for energy production but its variable nature has made balancing of demand and supply of the power grid difficult. Dynamic demand management using smart appliances is proposed to serve as a way that part of the regulation burden of balancing demand and supply is shifted to the demand side. However, if all appliances respond to the same frequency deviation, they may start to synchronize, causing large power overshoots and instability of the power grid. Therefore, the idea of implementing randomness into the frequency control of the appliances is proposed and this is what we call a stochastic approach. Simulators are built from scratch to model both scenarios. The effect of synchronization is analyzed and the parameters that can affect the synchronization are investigated. It has been found that the larger the contribution from the smart appliances to the power grid, the easier and faster the synchronization takes place. The stochastic approach solves the problem of synchronization and averages out the large power overshoot. However, the overall performance of stochastic operations is unacceptable due to the randomness in the operation though the mean and variance are as expected. More advanced feedback policies and schemes may be designed to achieve a better performance.

  10. Caries outcomes after orthodontic treatment with fixed appliances: do lingual brackets make a difference?

    NARCIS (Netherlands)

    van der Veen, M.H.; Attin, R.; Schwestka-Polly, R.; Wiechmann, D.

    2010-01-01

    Orthodontic treatment with fixed appliances is considered a risk factor for the development of white spot caries lesions (WSL). Traditionally, brackets are bonded to the buccal surfaces. Lingual brackets are developing rapidly and have become more readily available. Buccal surfaces are considered to

  11. Effects of the Herbst appliance in growing orthodontic patients with different underlying vertical patterns.

    Science.gov (United States)

    Deen, Emily; Woods, Michael G

    2015-05-01

    The present study involved an assessment of the effects of the Herbst appliance used for Class II correction in subjects with different vertical facial patterns. Pre- and post-treatment lateral cephalograms of 91 growing Class II patients were divided into three vertical facial groups on the basis of mandibular plane angulation. All received a Herbst appliance and dental and skeletal changes were assessed in relation to pretreatment incisal overbite, overjet and the stage of cervical maturity. Herbst appliance treatment was accompanied by changes in the angulation of the upper and lower incisors, overjet reduction and an increase in mandibular length. In general, the rotational facial changes occurring during treatment were minimal, so that dolichofacial patterns remained long and brachyfacial patterns remained short. Herbst appliance treatment can be expected to result in considerable Class II dental correction. It is unlikely, however, that its use will be associated with clinically significant forward rotation in dolichofacial subjects. Since dolichofacial patterns are likely to remain long-faced, even after considerable Class II dental correction, orthognathic surgery may still be a consideration if normal facial proportions, without excessive facial convexity and lip strain, are treatment aims.

  12. 77 FR 234 - Rule Concerning Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances...

    Science.gov (United States)

    2012-01-04

    ... CFR Part 305 RIN 3084-AB03 Rule Concerning Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances and Other Products Required Under the Energy Policy and Conservation Act... industry members ] and consumers determine whether equipment meets applicable new Department of Energy...

  13. Mapping chemical elements on the surface of orthodontic appliance by SEM-EDX.

    Science.gov (United States)

    Mikulewicz, Marcin; Wołowiec, Paulina; Michalak, Izabela; Chojnacka, Katarzyna; Czopor, Wojciech; Berniczei-Royko, Adam; Vegh, Andras; Gedrange, Thomas

    2014-05-25

    During orthodontic treatment, the various elements that constitute the fixed appliance undergo different processes. As a result of a change of the surface, elution/coverage of metals on the surface can be observed in the process of corrosion/passivation. Scanning electron microscopy with an energy-dispersive X-ray analytical system (SEM-EDX) was used to analyze the composition of stainless steel elements of orthodontic fixed appliances (before and after orthodontic treatment), to obtain the composition of the surface of the elements. The analyzed elements were: brackets (Victory Series APC PLUS 022, 3M Unitek, Monrovia, CA, USA); wires (0.017×0.025, 3M Unitek, Monrovia, CA, USA); and bands (37+, 3M Unitek, Monrovia, CA, USA). The results showed a decrease of chromium and iron contribution to the surface, with increase of oxygen content in used vs. new elements of the appliance. Our results confirm the formation of oxides (passivation layer) on the surface of stainless steel as a result of the presence of the orthodontic appliance in patients' oral cavities.

  14. Greening consumption at the retail outlet: the case of the Thai appliance industry

    NARCIS (Netherlands)

    Thongplew, N.; Spaargaren, G.; Koppen, van C.S.A.

    2014-01-01

    Over the decades, the Thai appliance industry has developed into a strong and export-oriented industry with rigorous strategies to improve the environmental performance of products and production. Leading producers have recently begun to develop greening strategies targeting the consumption behavior

  15. Caries-inhibiting effect of preventive measures during orthodontic treatment with fixed appliances. A systematic review.

    NARCIS (Netherlands)

    Derks, A.; Katsaros, C.; Frencken, J.E.F.M.; Hof, M.A. van 't; Kuijpers-Jagtman, A.M.

    2004-01-01

    A systematic review was performed of published data on the caries-inhibiting effect of preventive measures during orthodontic treatment with fixed appliances. The purpose was to develop evidence-based recommendations about the most effective means of preventing white spot lesions in orthodontic pati

  16. Caries outcomes after orthodontic treatment with fixed appliances: do lingual brackets make a difference?

    NARCIS (Netherlands)

    van der Veen, M.H.; Attin, R.; Schwestka-Polly, R.; Wiechmann, D.

    2010-01-01

    Orthodontic treatment with fixed appliances is considered a risk factor for the development of white spot caries lesions (WSL). Traditionally, brackets are bonded to the buccal surfaces. Lingual brackets are developing rapidly and have become more readily available. Buccal surfaces are considered to

  17. Assessing the standards of online oral hygiene instructions for patients with fixed orthodontic appliances

    NARCIS (Netherlands)

    Verhoef, Willem A.; Livas, Christos; Delli, Konstantina; Ren, Yijin

    2015-01-01

    Background. The authors conducted this study to assess the quality of the information available on the Web about oral hygiene for patients with fixed orthodontic appliances. Methods. The authors entered the search terms "cleaning braces," " brushing braces," and "oral hygiene and braces" into Google

  18. Full 3-dimensional digital workflow for multicomponent dental appliances A proof of concept

    NARCIS (Netherlands)

    Meer, van der Joerd; Vissink, Arjan; Ren, Yijin

    2016-01-01

    Background. The authors used a 3-dimensional (3D) printer and a bending robot to produce a multicomponent dental appliance to assess whether 3D digital models of the dentition are applicable for a full digital workflow. Methods. The authors scanned a volunteer's dentition with an intraoral scanner (

  19. Influence of Cervitec gel on periodontal health of patients wearing fixed orthodontic appliances

    Directory of Open Access Journals (Sweden)

    Burcu Özdemir

    2014-09-01

    Conclusion: The present data suggested that brushing with Cervitec gel once a day has the potential to reduce bacterial accumulation around teeth and fixed appliances in patients undergoing orthodontic treatment. However, within the limits of this study, Cervitec seems to have no significant effect on total bacteria, P.g., and T.d. levels of subgingival dental plaque.

  20. Adult patients' adjustability to orthodontic appliances. Part I: a comparison between Labial, Lingual, and Invisalign™.

    Science.gov (United States)

    Shalish, Miri; Cooper-Kazaz, Rena; Ivgi, Inbal; Canetti, Laura; Tsur, Boaz; Bachar, Eytan; Chaushu, Stella

    2012-12-01

    This prospective study examined the adult patient's perception of recovery after insertion of three types of orthodontic appliances: Buccal, Lingual and Invisalign. The sample consisted of sixty-eight adult patients (45 females and 23 males) who comprised three groups: 28 Buccal, 19 Lingual, and 21 Invisalign patients. After appliance insertion, patients completed a Health-Related Quality of Life questionnaire daily for the first week and again on day 14, in order to assess patients' perception of pain and analgesic consumption. In addition, four areas of dysfunction were assessed: oral dysfunction, eating disturbances, general activity parameters, and oral symptoms. Lingual appliance was associated with more severe pain and analgesic consumption, the greatest oral and general dysfunction, and the most difficult and longest recovery. The Invisalign patients complained of relatively high levels of pain in the first days after insertion; however this group was characterized by the lowest level of oral symptoms and by a similar level of general activity disturbances and oral dysfunction compared to the Buccal appliance. Many Lingual and some Buccal patients did not reach a full recovery from their eating difficulties by the end of the study period. The present study provides information to adult patients and clinicians assisting them in choosing the most appropriate treatment modality in relation to Health-Related Quality of Life parameters.

  1. Therapeutic effects of functional orthodontic appliances on cervical spine posture: a retrospective cephalometric study.

    Science.gov (United States)

    Ohnmeiß, Maren; Kinzinger, Gero; Wesselbaum, Julia; Korbmacher-Steiner, Heike M

    2014-03-24

    Interactions between the cervical spine and the stomatognathic system have been discussed in literature. The present study was conducted to investigate whether, and to what extent, orthodontically induced mandibular advancement produces changes in cervical spine posture. Furthermore, possible appliance-specific effects should be distinguished. The cephalograms of 64 patients with skeletal class II were analysed before and after mandibular advancement. Linear and angular cephalometric parameters were identified to define the position of the atlanto-occipital and atlantoaxial joints. The total example was divided into two subgroups (comprising 32 individuals each) according to the employed appliance: activator versus bite-jump appliance (BJA). Student's t-test and analysis of covariance were used for statistical analysis. Overall, a significant straightening of the cervical spine was observed during the treatment. This conclusion is based on changes of Chamberlain (p = 0.0055), CVT (p = 0.0003), OPT (p spine changes. In the activator subgroup the observed effects were more pronounced than those in the BJA subgroup. Further studies including a control group comprised with non-treated class II patients are needed to assess whether these effects may be caused directly by the appliances irrespective of growth.

  2. Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 Through 2015

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, Stephen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Alison [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-02-17

    This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2015. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2015, the standards saved an estimated 4.49 quads of primary energy, which is equivalent to 5% of total U.S. energy consumption. The savings in operating costs for households and businesses totaled $63.4 billion. The average household saved $320 in operating costs as a result of residential appliance standards. The estimated reduction in CO2 emissions associated with the standards in 2015 was 238 million metric tons, which is equivalent to 4.3% of total U.S. CO2 emissions. The estimated cumulative energy savings over the period 1990-2090 amount to 216.9 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a cumulative net present value (NPV) of consumer benefit of between $1,627 billion and $1,887 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.9 trillion gallons in 2015 and estimated cumulative water savings by 2090 amount to 55 trillion gallons. The estimated consumer savings in 2015 from reduced water use amounted to $12 billon.

  3. Stability of Class II fixed functional appliance therapy—a systematic review and meta-analysis

    Science.gov (United States)

    von Bremen, Julia; Ruf, Sabine

    2016-01-01

    Summary Objectives: To systematically search for scientific evidence concerning the stability of treatment (Tx) results achieved by means of Class II fixed functional appliance therapy and to assess possible differences between appliances. Search Methods: An electronic search of databases and orthodontic journals was carried out (until December 2013), with supplemental hand searching. In addition to the names of all identified appliances, the term fixed functional was used in combination with each of the following search terms: long-term, post-Tx, relapse, retention, stability. Selection Criteria: To be included in the review, the articles had to contain clear data on: Class II Tx with a fixed functional appliance (>5 patients), post-Tx period ≥ 1 year, assessment of ANB angle, Wits appraisal, molar relationship, soft-tissue profile convexity excluding the nose, overjet and/or overbite. Data Collection and Analysis: The literature search revealed 20 scientific investigations which corresponded to only two of the 76 identified appliances (Herbst and Twin Force Bite Corrector). As only one publication was found for the Twin Force Bite Corrector, a meta-analysis could only be performed for Herbst Tx. The data were extracted, pooled and weighted according to the number of patients in each study. Results: The mean values for post-Tx relapse (percentages relative to the Tx changes) were: ANB angle 0.2 degrees (12.4 per cent), Wits appraisal 0.5mm (19.5 per cent), sagittal molar relationship 1.2mm/0.1 cusp widths (21.8 per cent /6.5 per cent); soft-tissue profile convexity excluding nose less than 0.1 degrees (1.0 per cent), overjet 1.8mm (26.2 per cent), overbite Class II:1 1.4mm (44.7 per cent), overbite Class II:2 1.0mm (22.2 per cent). Conclusions: The scientific evidence concerning the stability of Tx results is inexistent for most fixed functional appliances for Class II correction except for Herbst appliance Tx. Even if the evidence level of most included studies

  4. Stability of Class II fixed functional appliance therapy--a systematic review and meta-analysis.

    Science.gov (United States)

    Bock, Niko C; von Bremen, Julia; Ruf, Sabine

    2016-04-01

    To systematically search for scientific evidence concerning the stability of treatment (Tx) results achieved by means of Class II fixed functional appliance therapy and to assess possible differences between appliances. An electronic search of databases and orthodontic journals was carried out (until December 2013), with supplemental hand searching. In addition to the names of all identified appliances, the term fixed functional was used in combination with each of the following search terms: long-term, post-Tx, relapse, retention, stability. To be included in the review, the articles had to contain clear data on: Class II Tx with a fixed functional appliance (>5 patients), post-Tx period ≥ 1 year, assessment of ANB angle, Wits appraisal, molar relationship, soft-tissue profile convexity excluding the nose, overjet and/or overbite. The literature search revealed 20 scientific investigations which corresponded to only two of the 76 identified appliances (Herbst and Twin Force Bite Corrector). As only one publication was found for the Twin Force Bite Corrector, a meta-analysis could only be performed for Herbst Tx. The data were extracted, pooled and weighted according to the number of patients in each study. The mean values for post-Tx relapse (percentages relative to the Tx changes) were: ANB angle 0.2 degrees (12.4 per cent), Wits appraisal 0.5mm (19.5 per cent), sagittal molar relationship 1.2mm/0.1 cusp widths (21.8 per cent /6.5 per cent); soft-tissue profile convexity excluding nose less than 0.1 degrees (1.0 per cent), overjet 1.8mm (26.2 per cent), overbite Class II:1 1.4mm (44.7 per cent), overbite Class II:2 1.0mm (22.2 per cent). The scientific evidence concerning the stability of Tx results is inexistent for most fixed functional appliances for Class II correction except for Herbst appliance Tx. Even if the evidence level of most included studies is rather low, good dentoskeletal stability without clinically relevant changes was found for most

  5. 76 FR 5787 - Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant...

    Science.gov (United States)

    2011-02-02

    ... Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant Programs... Perkins Loan, Federal Work-Study (FWS), and Federal Supplemental Educational Opportunity Grant (FSEOG... Federal Perkins Loan Program, Federal Work-Study Program, and Federal Supplemental Educational...

  6. The effect of e-learning on the quality of orthodontic appliances.

    Science.gov (United States)

    Schorn-Borgmann, Stephanie; Lippold, Carsten; Wiechmann, Dirk; Stamm, Thomas

    2015-01-01

    The effect of e-learning on practical skills in medicine has not yet been thoroughly investigated. Today's multimedia learning environment and access to e-books provide students with more knowledge than ever before. The aim of this study is to evaluate the effect of online demonstrations concerning the quality of orthodontic appliances manufactured by undergraduate dental students. The study design was a parallel-group randomized clinical trial. Fifty-four participants were randomly assigned to one of the three groups: 1) conventional lectures, 2) conventional lectures plus written online material, and 3) access to resources of groups one and two plus access to online video material. Three orthodontic appliances (Schwarz Plate, U-Bow Activator, and Fränkel Regulator) were manufactured during the course and scored by two independent raters blinded to the participants. A 15-point scale index was used to evaluate the outcome quality of the appliances. In general, no significant differences were found between the groups. Concerning the appliances, the Schwarz Plate obtained the highest scores, whereas the Fränkel Regulator had the lowest scores; however, these results were independent of the groups. Females showed better outcome scores than males in groups two and three, but the difference was insignificant. Age of the participants also had no significant effect. The offer that students could use additional time and course-independent e-learning resources did not increase the outcome quality of the orthodontic appliances. The advantages of e-learning observed in the theoretical fields of medicine were not achieved in the educational procedures for manual skills. Factors other than e-learning may have a higher impact on manual skills, and this should be investigated in further studies.

  7. Perception of pain as a result of orthodontic treatment with fixed appliances.

    Science.gov (United States)

    Scheurer, P A; Firestone, A R; Bürgin, W B

    1996-08-01

    The aims of this study were to investigate the intensity, location and duration of patients' discomfort following insertion of orthodontic appliances, and to examine for interactions between patient age, gender, appliance type and the perception of pain. After insertion of orthodontic appliances, 170 patients received eight questionnaires, one they completed and returned after 4 h, then one daily for 7 days. The respondents' ages ranged from 8-53 years (median age 13 years 7 months); 45 per cent were male and 55 per cent female. Of the patients, 65 per cent reported pain after 4 h and 95 per cent after 24 h. After 7 days, 25 per cent of the patients still reported discomfort. Patients' pain intensity scores were significantly higher for the anterior than for the posterior teeth. On day 1, 16 per cent took analgesics and 18 per cent reported being awakened the first night. Comparing a 2 x 4 appliance, a full appliance in one arch and in both arches, no statistical differences were found for reported pain frequency, general intensity of pain, pain at the teeth, discomfort when biting and chewing and analgesic consumption. The perception of general pain intensity, analgesic consumption, pain when eating and the influence of discomfort on daily life were all significantly greater in girls than in boys. Patients younger than 13 years reported pain significantly less frequently than the older patients. The highest frequency of pain was found in the group of 13-16 year olds. The pain intensity did not differ among the age groups.

  8. Initial forces generated by three types of thermoplastic appliances on an upper central incisor during tipping.

    Science.gov (United States)

    Hahn, Wolfram; Fialka-Fricke, Julia; Dathe, Henning; Fricke-Zech, Susanne; Zapf, Antonia; Gruber, Rudolf; Kubein-Meesenburg, Dietmar; Sadat-Khonsari, Reza

    2009-12-01

    The force properties of thermoformed appliances have not been systematically investigated. Therefore, the aim of the present study was to quantify the forces delivered by thermoplastic appliances manufactured from three different materials, with the same thickness, on a central upper incisor, during tipping. Five identical appliances were manufactured from three different materials all with a thickness of 1.0 mm (Ideal Clear, Erkodur, and Biolon). For measuring the forces, an isolated measuring tooth, as part of a standardized resin model incorporated in a newly developed measuring device, was tipped in nine 2.7 arc minute (0.04629 degree) steps, from 0 to 0.416 degrees in the vestibular and palatal directions around a rotational axis through the virtual apex, after positioning an appliance on the model. For statistical analysis, the force components Fx/tipping and Fz/intrusion at a displacement of +/-0.151 mm from the incisor edge were determined. Means and standard deviations (SDs) were calculated. The Kruskal-Wallis test for overall effects and the Wilcoxon two-sample test for individual group pairings were used (P forces ranged from -2.82 N (SD 0.62) to 5.42 N (SD 0.56). The mean Fz forces were between -0.14 N (SD 0.52) and -2.3 N (SD 0.43). The highest intrusive forces were measured during vestibular displacement of the measuring tooth. The forces delivered by the Biolon appliance were found to be much greater (P forces delivered by the materials investigated were mostly higher than those stated in the literature.

  9. Federal Fleet Report

    Data.gov (United States)

    General Services Administration — Annual report of Federal agencies' motor vehicle fleet data collected in the Federal Automotive Statistical Tool (FAST), a web-based reporting tool cosponsored by...

  10. TAP Service Federation Factory

    Science.gov (United States)

    Hume, A. C.; Krause, A.; Holliman, M.; Mann, R. G.; Noddle, K.; Voutsinas, S.

    2012-09-01

    This paper describes a prototype federation service for multiple TAP endpoints. Users can create a new TAP resource that allows them to query the federation as if all tables were in a single database.

  11. A novel load balancing method for hierarchical federation simulation system

    Science.gov (United States)

    Bin, Xiao; Xiao, Tian-yuan

    2013-07-01

    In contrast with single HLA federation framework, hierarchical federation framework can improve the performance of large-scale simulation system in a certain degree by distributing load on several RTI. However, in hierarchical federation framework, RTI is still the center of message exchange of federation, and it is still the bottleneck of performance of federation, the data explosion in a large-scale HLA federation may cause overload on RTI, It may suffer HLA federation performance reduction or even fatal error. Towards this problem, this paper proposes a load balancing method for hierarchical federation simulation system based on queuing theory, which is comprised of three main module: queue length predicting, load controlling policy, and controller. The method promotes the usage of resources of federate nodes, and improves the performance of HLA simulation system with balancing load on RTIG and federates. Finally, the experiment results are presented to demonstrate the efficient control of the method.

  12. Interactions between Energy Efficiency Programs funded under the Recovery Act and Utility Customer-Funded Energy Efficiency Programs

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, Charles A.; Stuart, Elizabeth; Hoffman, Ian; Fuller, Merrian C.; Billingsley, Megan A.

    2011-02-25

    Since the spring of 2009, billions of federal dollars have been allocated to state and local governments as grants for energy efficiency and renewable energy projects and programs. The scale of this American Reinvestment and Recovery Act (ARRA) funding, focused on 'shovel-ready' projects to create and retain jobs, is unprecedented. Thousands of newly funded players - cities, counties, states, and tribes - and thousands of programs and projects are entering the existing landscape of energy efficiency programs for the first time or expanding their reach. The nation's experience base with energy efficiency is growing enormously, fed by federal dollars and driven by broader objectives than saving energy alone. State and local officials made countless choices in developing portfolios of ARRA-funded energy efficiency programs and deciding how their programs would relate to existing efficiency programs funded by utility customers. Those choices are worth examining as bellwethers of a future world where there may be multiple program administrators and funding sources in many states. What are the opportunities and challenges of this new environment? What short- and long-term impacts will this large, infusion of funds have on utility customer-funded programs; for example, on infrastructure for delivering energy efficiency services or on customer willingness to invest in energy efficiency? To what extent has the attribution of energy savings been a critical issue, especially where administrators of utility customer-funded energy efficiency programs have performance or shareholder incentives? Do the new ARRA-funded energy efficiency programs provide insights on roles or activities that are particularly well-suited to state and local program administrators vs. administrators or implementers of utility customer-funded programs? The answers could have important implications for the future of U.S. energy efficiency. This report focuses on a selected set of ARRA

  13. Contracting for Efficiency. A Best Practices Guide for Energy -Efficient Product Procurement

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence Berkeley National Laboratory

    2016-04-25

    The requirement to buy energy- and water-efficient products applies to federal purchases made through any procurement pathway (e.g., purchase cards, e-retailers, and solicitations) and to a wide variety of federal projects. The Federal Energy Management Program’s (FEMP's) Buy Energy-Efficient Products buyer overview fact sheet and Contracting for Efficiency best practices guide for product procurement are designed to support federal buyers in the purchase of energy- and water-efficient products.

  14. Long-term oral appliance therapy in obstructive sleep apnea syndrome: a controlled study on temporomandibular side effects.

    Science.gov (United States)

    Doff, Michiel H J; Veldhuis, Steffanie K B; Hoekema, Aarnoud; Slater, James J R Huddleston; Wijkstra, P J; de Bont, Lambert G M; Stegenga, Boudewijn

    2012-06-01

    The objective of this study was to assess variations in the occurrence of temporomandibular disorders (TMDs) and the risk of developing pain and function impairment of the temporomandibular complex in obstructive sleep apnea syndrome (OSAS) patients treated with either an oral appliance (mandibular advancement device) or continuous positive airway pressure (CPAP) in a 2-year follow-up study. In addition, we assessed the relationship between the mean mandibular protrusion and the frequency of wearing the appliance during follow-up with the occurrence of pain and function impairment of the temporomandibular complex. Fifty-one patients were randomized to oral appliance therapy and 52 patients to CPAP therapy. TMDs (diagnosed according to the Axis I Research Diagnostic Criteria for TMD), pain intensity and disability and mandibular function impairment were recorded at baseline, after 2 months, 1 year and 2 years of therapy. Only in the initial period of treatment the occurrence of pain-related TMDs was considerably higher (24%) in the oral appliance group compared to CPAP (6%). Oral appliance therapy furthermore resulted in more temporomandibular pain compared to CPAP (odds ratio 2.33, 95% confidence interval (1.22-4.43)). However, there were no limitations in mandibular function in both groups during the (entire) follow-up period. Although generally not serious and of transient nature, oral appliance therapy results in more pain-related TMDs in the initial period of use compared with CPAP therapy. Oral appliance therapy is associated with increased pain in the temporomandibular complex in the initial period of use. Because of the transient nature, this pain is not a reason to contra-indicate an oral appliance in OSAS patients. Moreover, TMDs and the risk of developing pain and function impairment of the temporomandibular complex appear limited with long-term oral appliance use.

  15. Research on Residential Users Load Control Strategy of Household Appliances%居民用户家用电器负荷控制策略研究

    Institute of Scientific and Technical Information of China (English)

    熊克卿; 李彬; 祁兵

    2015-01-01

    Under the support of smart power utilization and power demand response technologies, a research on the response mechanism of demand response in consumer-side is made, combining with the load characteristic of intelligent household appliances and electricity consumption behavior of residents. The method of shifting-peak operation and building load control strategy of typical household appliances to decrease residential customers’ energy consumption and improve the users’ energy-consuming efficiency is put forward. Then it will promote the bidirectional interaction between consumer side and grid side and encourage users to participate in the demand response programs.%在智能用电技术和电力需求响应技术的支撑下,结合智能家用电器负荷特性以及居民用户的用电行为,研究用户侧需求响应(demand response,DR)的响应机理,提出家用电器错峰运行方法,建立典型家用电器的负荷控制策略,实现居民用户用电量的削减,提高用户的用能效率,进而推动用户侧和电网侧的双向互动,鼓励用户参与需求响应项目的积极性。

  16. Bioinformatics pipelines for targeted resequencing and whole-exome sequencing of human and mouse genomes: a virtual appliance approach for instant deployment.

    Directory of Open Access Journals (Sweden)

    Jason Li

    Full Text Available Targeted resequencing by massively parallel sequencing has become an effective and affordable way to survey small to large portions of the genome for genetic variation. Despite the rapid development in open source software for analysis of such data, the practical implementation of these tools through construction of sequencing analysis pipelines still remains a challenging and laborious activity, and a major hurdle for many small research and clinical laboratories. We developed TREVA (Targeted REsequencing Virtual Appliance, making pre-built pipelines immediately available as a virtual appliance. Based on virtual machine technologies, TREVA is a solution for rapid and efficient deployment of complex bioinformatics pipelines to laboratories of all sizes, enabling reproducible results. The analyses that are supported in TREVA include: somatic and germline single-nucleotide and insertion/deletion variant calling, copy number analysis, and cohort-based analyses such as pathway and significantly mutated genes analyses. TREVA is flexible and easy to use, and can be customised by Linux-based extensions if required. TREVA can also be deployed on the cloud (cloud computing, enabling instant access without investment overheads for additional hardware. TREVA is available at http://bioinformatics.petermac.org/treva/.

  17. Mandibular advancement appliance for obstructive sleep apnoea: results of a randomised placebo controlled trial using parallel group design

    DEFF Research Database (Denmark)

    Petri, N.; Svanholt, P.; Solow, B.

    2008-01-01

    The aim of this trial was to evaluate the efficacy of a mandibular advancement appliance (MAA) for obstructive sleep apnoea (OSA). Ninety-three patients with OSA and a mean apnoea-hypopnoea index (AHI) of 34.7 were centrally randomised into three, parallel groups: (a) MAA; (b) mandibular non......-advancement appliance (MNA); and (c) no intervention. The appliances were custom made, in one piece. The MAAs had a mean protrusion of the mandible of 74% (range 64-85%). Outcome measures, assessed after continuous use for 4 weeks, were AHI (polysomnography), daytime sleepiness (Epworth) and quality of life (SF-36...

  18. Anterior Sectional Twin Bracket Appliance - Innovative Use for Correction of Single Tooth Crossbite: A Case Report with Biomechanics.

    Science.gov (United States)

    Verma, Raj Kumar; Raghav, Pradeep; Reddy, Munish C; Kanwal, Ritika

    2015-01-01

    Anterior sectional twin bracket appliance (ASTBA) is a sectional mechanism that involves two brackets on upper central incisors. This appliance is previously been used for correction of rotated incisors and midline spacing. But, detail biomechanics for single tooth crossbite correction is not previously explained. Here, in this article, we are presenting a detailed biomechanics of ASTBA for anterior single tooth crossbite correction along with case report. How to cite this article: Verma RK, Raghav P, Reddy MC, Kanwal R. Anterior Sectional Twin Bracket Appliance- Innovative Use for Correction of Single Tooth Crossbite: A Case Report with Biomechanics. Int J Clin Pediatr Dent 2015;8(1): 66-69.

  19. The geography teacher's set of appliances - `GEOGRAPHY nEtQUIPMENT' - Self improved school equipment used in teaching geography

    Science.gov (United States)

    Pajtok-Tari, I.

    2009-04-01

    , geography games, important web pages (SDT, Google Earth) etc. Multimedia offers a new and efficient procedure of spreading information. It creates new possibilities in forming the teaching - learning environment. It integrates more mediums that way providing more efficient visualized possibilities for the teacher. The use of multimedia systems is advantageous because at the same time they have effect on more senses. The presentation of the content is more interesting, pleasing, so it is motivating. The renewal of schools can be achieved by those teachers who are able to recognize and use the modern technics, tecnology, for this reason teachers should integrate them in their activities. Hopefully the Net set of appliances makes this easier. The Net set of appliances can be shaped by the teacher. It can be loaded with his own materials (photos, videos, tests, charts, drafts, etc.). This way teachers may help their students to be familiar with the faster and faster developing information society so satisfying one of the most common goals of teaching geography, according to it: giving a coherent, comprehensive image of our world on a scientific basis, systematic knowledge, so creating a firm base for their further self- studies and the clever reception and appreciation of information.

  20. White Paper on Energy Efficiency Status of Energy-Using Products in China (2011)

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Romankiewicz, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-01

    This White Paper focuses on the areas and products involved in the above tasks, based on the White Paper - Energy Efficiency Status of Energy-Using Products in China (2010), here referred to as “White Paper 2010”, which analyzed the energy efficiency status of 21 typical energy-using products in five sectors: household appliances, office equipment, commercial equipment, industrial equipment, and lighting equipment. Table 1 illustrates the detailed product coverage for this year’s paper, noting the addition of three household appliance items (automatic electric rice cooker, AC electric fan, and household induction cooktop) and one industrial sector item (three-phase distribution transformer).

  1. 24 CFR 3280.707 - Heat producing appliances.

    Science.gov (United States)

    2010-04-01

    ... thermal efficiency of not less than that specified in nationally recognized standards (See § 3280.703). (b... heaters installed in manufactured homes shall have a standby loss not exceeding 43 watts/meter2 (4 watts... of Household Automatic Electric Storage Type Water Heaters, ANSI C72.1-1972. (2) All gas and...

  2. Treatment of class II and class III maloccolusion by using churro jumper: an efficient, inexpensive and uncomplicated fixed flexible functional technique

    OpenAIRE

    Mani, Shubhangi Amit; Mote, Nilesh; Pawar, Kunal Dilip; Mishra, Prashantkumar; Mishra, Richa Anil; Rai, Rajlaxmi Rajaram

    2016-01-01

    Functional orthopedic treatment seeks to improve skeletal and dental relationship of the jaws. The challenging task is to correctly position jaws antero-posteriorly and vertically with correct overbite, overjet and Centric relation. The Churro Jumper is an efficient, inexpensive and uncomplicated fixed flexible functional appliance. It is used to evaluate the efficacy of the Churro Jumper appliance in treatment of skeletal Class II malocclusion with retrognathic mandible. Churro Jumper contri...

  3. Comparative Effects of Two Oral Appliances on Upper Airway Structure in Obstructive Sleep Apnea

    Science.gov (United States)

    Sutherland, Kate; Deane, Sheryn A.; Chan, Andrew S.L.; Schwab, Richard J.; Ng, Andrew T.; Darendeliler, M. Ali; Cistulli, Peter A.

    2011-01-01

    Study Objectives: Oral appliances are increasingly being used for treatment of obstructive sleep apnea (OSA). Mandibular advancement splint (MAS) mechanically protrudes the mandible, while the tongue stabilizing device (TSD) protrudes and holds the tongue using suction. Although both appliances can significantly improve or ameliorate OSA, their comparative effects on upper airway structure have not been investigated. Design: Cohort study. Setting: Sleep Investigation Unit. Patients: 39 patients undergoing oral appliance treatment for OSA. Interventions: OSA patients underwent magnetic resonance imaging (MRI) of the upper airway during wakefulness at baseline and with MAS and TSD in randomized order. Treatment efficacy was determined by polysomnography in a subset of 18 patients. Measurements and Results: Upper airway lumen and surrounding soft tissue structures were segmented using image analysis software. Upper airway dimensions and soft tissue centroid movements were determined. Both appliances altered upper airway geometry, associated with movement of the parapharyngeal fat pads away from the airway. TSD increased velopharyngeal lateral diameter to a greater extent (+0.35 ± 0.07 vs. +0.18 ± 0.05 cm; P < 0.001) and also increased antero-posterior diameter with anterior displacement of the tongue (0.68 ± 0.04 cm; P < 0.001) and soft palate (0.12 ± 0.03 cm; P < 0.001). MAS resulted in significant anterior displacement of the tongue base muscles (0.35 ± 0.04 cm). TSD responders (AHI reduction ≥ 50%) increased velopharyngeal volume more than non-responders (+2.65 ± 0.9 vs. –0.44 ± 0.8 cm3; P < 0.05). Airway structures did not differ between MAS responders and non-responders. Conclusions: These results indicate that the patterns and magnitude of changes in upper airway structure differ between appliances. Further studies are warranted to evaluate the clinical relevance of these changes, and whether they can be used to predict treatment outcome. Citation

  4. Changes in soft tissue profile using functional appliances in the treatment of skeletal class II malocclusion

    Directory of Open Access Journals (Sweden)

    Stamenković Zorana

    2015-01-01

    Full Text Available Introduction. The effects of orthodontic treatment are considered to be successful if the facial harmony is achieved, while the structures of soft tissue profile are in harmony with skeletal structures of neurocranium and viscerocranium. In patients with skeletal distal bite caused by mandibular retrognathism, facial esthetics is disturbed often, in terms of pronounced convexity of the profile and change in the position and relationship of the lips. Objective. The aim of this study was to determine the extent of soft tissue profile changes in patients with skeletal Class II malocclusion treated with three different orthodontic appliances: Fränkel functional regulator type I (FR-I, Balters’ Bionator type I and Hotz appliance. Methods. The study included 60 patients diagnosed with skeletal Class II malocclusion caused by mandibular retrognathism, in the period of early mixed dentition. Each subgroup of 20 patients was treated with a variety of orthodontic appliances. On the lateral cephalogram, before and after treatment, the following parameters were analyzed: T angle, H angle, the height of the upper lip, the position of the upper and lower lip in relation to the esthetic line. Within the statistical analysis the mean, maximum, minimum, standard deviation, coefficient of variation, two-factor analysis of variance with repeated measures and the factor analysis of variance were calculated using ANOVA, Bonferroni test and Student’s t-test. Results. A significant decrease of angles T and H was noticed in the application of FR-I, from 21.60° to 17.15°, and from 16.45° to 13.40° (p<0.001. FR-I decreased the height of the upper lip from 26.15 mm to 25.85 mm, while Hotz appliance and Balters’ Bionator type I increased the height of the upper lip, thereby deteriorating esthetics of the patient. Conclusion. All used orthodontic appliances lead to changes in soft tissue profile in terms of improving facial esthetics, with the most distinctive

  5. 31 CFR 205.35 - What is the result of Federal Program Agency or State non-compliance?

    Science.gov (United States)

    2010-07-01

    ... Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE RULES AND PROCEDURES FOR EFFICIENT FEDERAL-STATE FUNDS TRANSFERS Rules Applicable to Federal...

  6. 75 FR 12217 - Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant...

    Science.gov (United States)

    2010-03-15

    ... Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant programs... Perkins Loan, Federal Work-Study (FWS), and Federal Supplemental Educational Opportunity Grant (FSEOG.... (2) General Provisions for the Federal Perkins Loan Program, Federal Work-Study Program, and...

  7. 77 FR 4547 - Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant...

    Science.gov (United States)

    2012-01-30

    ... Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant Programs... requests and documents from postsecondary institutions for the Federal Perkins Loan, Federal Work-Study.... (2) General Provisions for the Federal Perkins Loan Program, Federal Work-Study Program, and...

  8. 78 FR 14776 - Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant...

    Science.gov (United States)

    2013-03-07

    ... Federal Perkins Loan, Federal Work-Study, and Federal Supplemental Educational Opportunity Grant Programs... requests and documents from postsecondary institutions for the Federal Perkins Loan, Federal Work-Study..., Federal Work-Study Program, and Federal Supplemental Educational Opportunity Grant Program, 34 CFR...

  9. Removable orthodontic appliance with nickel-titanium spring to reposition the upper incisors in an autistic patient.

    Science.gov (United States)

    Saito, Kan; Jang, Insan; Kubota, Kazumi; Hoshino, Tomonori; Hotokezaka, Hitoshi; Yoshida, Noriaki; Fujiwara, Taku

    2013-01-01

    A newly designed removable appliance with a shape-memory wire was used for the orthodontic treatment of the anterior teeth in an 11-year-old child who had autism and intellectual disability. The device was designed to reduce the lateral incisor crossbite and the central incisors' labial rotation. The child was treated for 1 year with this removable appliance. Tooth movement was analyzed using cephalograms and surface data were derived from study models. This device proved to be very durable. The lateral incisor crossbite was corrected, and the inclination of the upper central incisors and the interincisal angle were improved. This appliance exerts light and continuous orthodontic force, without requiring any adjustments of the spring wire. The appliance also facilitated orthodontic treatment in a child with intellectual disability in whom treatment with a standard orthodontic device would be unsuitable.

  10. Treatment of Class II open bite in the mixed dentition with a removable functional appliance and headgear.

    Science.gov (United States)

    Ngan, P; Wilson, S; Florman, M; Wei, S H

    1992-05-01

    Early diagnosis of patients exhibiting open bites that are complicated by skeletal Class II and vertical growth problems can facilitate subsequent treatment. Eight patients with Class II skeletal open bite were treated with the high-pull activator appliance and compared to reasonably matched controls to determine the effects of the appliance. The high-pull activator was found to reduce forward growth of the maxilla and increase mandibular alveolar height, transforming the Class II molar relationship into a Class I molar relationship. The overjet and open bite were decreased, and, in addition, the appliance reduced the amount of forward and downward movement of the maxillary molars, providing vertical control of the maxilla during Class II orthopedic correction. These results demonstrated that open bite complicated by a Class II vertical growth pattern can be treated during the mixed dentition with favorable results by a combination of a removable functional appliance and high-pull headgear.

  11. Long-term oral-appliance therapy in obstructive sleep apnea : A cephalometric study of craniofacial changes

    NARCIS (Netherlands)

    Doff, M. H. J.; Hoekema, A.; Pruim, G. J.; Slater, J. J. R. Huddleston; Stegenga, B.

    2010-01-01

    Objectives The aim of this randomized controlled study was to cephalometrically assess possible changes in craniofacial morphology associated with long term use of an adjustable oral appliance compared with continuous positive airway pressure (CPAP) in patients with the obstructive sleep

  12. A preliminary report on the use of cane and bamboo as basic construction materials for orthotic and prosthetic appliances.

    Science.gov (United States)

    Banerji, B; Banerji, J B

    1984-08-01

    Cane and bamboo have been found to be viable and alternative basic construction materials for orthotic/prosthetic appliances and rehabilitation aids. Amongst the appliances made, the night splint and the upper limb splints have proved effective in field trials. The lower limb orthoses and prosthesis however are still at an experimental stage. Of the rehabilitation aids, walkers, crutches and wheelchairs have been found to be remarkably useful, cheap and light.

  13. Dentaoalveolar changes in young adult patients with Class II/1 malocclusion treated with the Herbst appliance and an activator

    Directory of Open Access Journals (Sweden)

    Nedeljković Nenad

    2010-01-01

    Full Text Available Background/Aim. Functional appliances can be used effectively in the treatment of skeletal Class II/1 malocclusions. The best treatment results are obtained during active period of facial growth when skeletal, as well as dentoalveolar, changes occur. In comparison with removable functional appliances, such as activator, that are effective only during adolescent period of growth, the Herbst fixed appliance is also successful at the end of the growth period. It also offers a shorter treatment time and a patient compliance is not necessary. The aim of this study was to analyze and compare dentoalveolar changes in the group of young adult patients with Class II/1 malocclusion treated with the Herbst appliance and an activator. Methods. The sample for this study consisted of 50 patients of both sexes, 14-21 years of age with Class II/1 malocclusion. For estimating the effect of functional appliances used, the following cephalometrics parameters were determined: inclination of the upper and lower incisors, interincisal angle, antero-posterior molars relationships, overjet and overbite. The results obtained were statistically tested. Results. The cephalometric findings after the treatment indicated retroinclination of upper incisors (average value of 9° and proclination of lower incisors (average value of 7°, mostly expressed in the patients treated by Herbst appliance (p < 0.001. Increased overjet and distocclusion were completely corrected in the group of patients treated with the Herbst appliance, while the correction of malocclusion in the activator group was only partially accomplished. No changes in the overbite were noticed at the end of the treatment in both groups. Conclusion. The results of this study revealed that the Herbst appliance is more effective in the treatment of Class II/1 malocclusion in young adults in comparison with the activator.

  14. Promoting greater Federal energy productivity [Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, Mark; Dudich, Luther

    2003-03-05

    This document is a close-out report describing the work done under this DOE grant to improve Federal Energy Productivity. Over the four years covered in this document, the Alliance To Save Energy conducted liaison with the private sector through our Federal Energy Productivity Task Force. In this time, the Alliance held several successful workshops on the uses of metering in Federal facilities and other meetings. We also conducted significant research on energy efficiency, financing, facilitated studies of potential energy savings in energy intensive agencies, and undertook other tasks outlined in this report.

  15. Prosthodontic management of segmental mandibulectomy patient with guidance appliance and overlay denture.

    Science.gov (United States)

    Aruna, U; Thulasingam, C

    2013-12-01

    Patients who undergo segmental or hemi-mandibulectomy suffer from various postoperative problems in esthetics and function. The solution to such problem is providing a mandibular guidance appliance to correct mandibular deviation to resected side due to loss of muscle action on the affected side. This article describes the treatment of a female patient who underwent segmental mandibulectomy on right side secondary to adenoid cystic carcinoma of the base of tongue. An acrylic guidance appliance was constructed to help control the mandibular deviation and co-ordinate masticatory movements. The prosthesis was worn continuously by the patient for 1 month which corrected the occlusion on the left side. To compensate for the open-bite caused due to rotation of mandible following partial mandibulectomy, an overlay removable partial denture was given. The patient was satisfied with the improvement in esthetics and mastication.

  16. Mini-implant-borne Pendulum B appliance for maxillary molar distalisation: design and clinical procedure.

    Science.gov (United States)

    Wilmes, Benedict; Katyal, Vandana; Drescher, Dieter

    2014-11-01

    A treatment objective of upper molar distalisation may often be required during the correction of a malocclusion. Distalisation is not only indicated for the management of Class II patients, but also for Class III surgery patients who require decompensation in the upper arch if upper incisor retrusion is needed. Unfortunately, most conventional intra-oral devices for non-compliance maxillary molar distalisation experience anchorage loss. A Pendulum type of appliance and a mini-implant-borne distalisation mechanism have been designed which can be inserted at chair-side, without a prior laboratory procedure and immediately after mini-implant placement. For re-activation purposes, a distal screw may be added to the Pendulum B appliance.

  17. Molar Uprighting Using Mini-Screws after Distalization by the Pendulum Appliance: A Case Report

    Directory of Open Access Journals (Sweden)

    Amir Moradi

    2013-12-01

    Full Text Available A 16-year-old Class II female patient was treated without tooth extraction. The upper first molars were distalized by the Pendulum appliance. After six months, the molars tipped significantly to the distal. To correct this side effect, we decided to upright the molars using skeletal anchorage. On each side, a mini-screw was inserted between first and second premolars in the buccal cortical plate. An auxiliary spring was placed between the mini-screw head and the molar buccal tube. The resultant moment made the first molar upright. In addition, the side effects of this mechanic, i.e. molar intrusion and molar buccal tipping, counteract the extrusion and medial movement caused by the Pendulum Appliance. The aim of this case report was to present an innovative method for molar uprighting using skeletal anchorage.

  18. Globalni izzivi v svetovni industriji bele tehnike = Global Challenges in the Domestic Appliances Industry

    Directory of Open Access Journals (Sweden)

    Dušan Gošnik

    2009-06-01

    Full Text Available bal Challenges in the Domestic Appliances IndustryAbstract: The domestic appliances industry is a mature industry. Changes in the business environment such as political, law, cultural, social, ecological and technological influences have an effect on the future development of this industry. Challenges to producers in this industry are oriented towards the further globalisation of the business, managing processes, new product and innovations development, and towards establishing and empowerment of the product brands. Global trends in the use of some natural sources, technological break-through, fulfilment of the market and strong competition direct us towards new innovations which will in their development consider also the social and environmental aspect as well.

  19. Improved Controller Design of Grid Friendly™ Appliances for Primary Frequency Response

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Jianming; Sun, Yannan; Marinovici, Laurentiu D.; Kalsi, Karanjit

    2015-09-01

    The Grid Friendly$^\\textrm{TM}$ Appliance~(GFA) controller, developed at Pacific Northwest National Laboratory, can autonomously switch off the appliances by detecting the under-frequency events. In this paper, the impacts of curtailing frequency threshold on the performance of frequency responsive GFAs are carefully analyzed first. The current method of selecting curtailing frequency thresholds for GFAs is found to be insufficient to guarantee the desired performance especially when the frequency deviation is shallow. In addition, the power reduction of online GFAs could be so excessive that it can even impact the system response negatively. As a remedy to the deficiency of the current controller design, a different way of selecting curtailing frequency thresholds is proposed to ensure the effectiveness of GFAs in frequency protection. Moreover, it is also proposed to introduce a supervisor at each distribution feeder to monitor the curtailing frequency thresholds of online GFAs and take corrective actions if necessary.

  20. Correction of Skeletal Class II Malocclusion using Functional-Fixed Appliance Therapy

    Directory of Open Access Journals (Sweden)

    Ashok Surana

    2012-01-01

    Full Text Available Single-phase treatment started during late mixed dentition using functional followed by fixed appliance therapy has proven to be the most effective approach to achieve correction of Class II malocclusion. This case report demonstrates the use of this treatment approach in an 11-year-old girl with skeletal and dental Class II malocclusion, large overjet, deep overbite, increased incisor exposure and a gummy smile. She was given a functional appliance for 1 year which was immediately followed by fixed mechanotherapy for final finishing and detailing of the occlusion. The magnitude of skeletal and dental correction achieved, along with the dramatic improvement in facial appearance of the patient, provides a strong case for establishing the efficacy of this treatment modality.

  1. Database Are Not Toasters: A Framework for Comparing Data Warehouse Appliances

    Science.gov (United States)

    Trajman, Omer; Crolotte, Alain; Steinhoff, David; Nambiar, Raghunath Othayoth; Poess, Meikel

    The success of Business Intelligence (BI) applications depends on two factors, the ability to analyze data ever more quickly and the ability to handle ever increasing volumes of data. Data Warehouse (DW) and Data Mart (DM) installations that support BI applications have historically been built using traditional architectures either designed from the ground up or based on customized reference system designs. The advent of Data Warehouse Appliances (DA) brings packaged software and hardware solutions that address performance and scalability requirements for certain market segments. The differences between DAs and custom installations make direct comparisons between them impractical and suggest the need for a targeted DA benchmark. In this paper we review data warehouse appliances by surveying thirteen products offered today. We assess the common characteristics among them and propose a classification for DA offerings. We hope our results will help define a useful benchmark for DAs.

  2. A study to detect important factors influencing purchasing product: A case study of home appliances

    Directory of Open Access Journals (Sweden)

    Amir Ghafurian Shagerdi

    2013-07-01

    Full Text Available Home appliances are among basic requirements of anyone in the world and it is always important to find out about factors influencing this industry. Therefore, the purpose of this study is to provide a comprehensive model to detect major factors influencing on consumer purchasing intention. For this purpose, the proposed study designs a questionnaire and distributes it among 400 customers who have some experiences on purchasing home appliances in city of Tehran, Iran, recently. Cronbach alpha was calculated for all components of the survey and they were all well above the minimum acceptable level. We analyzed the data using structural equation modeling via LISREL and the results of this survey show that brand familiarity, brand trust, and perceived value have significant positive effects on consumers purchase intention.

  3. Cl II Malocclusion Treatment, Using the Modified Twin Block Appliance Coordinated with Fixed Orthodontics in a Postmenarche Patient

    Directory of Open Access Journals (Sweden)

    Amin Aminian

    2017-01-01

    Full Text Available Functional appliances have been used for treatment of Class II patients for a long time. The main objective of therapy with functional appliances is to induce supplementary lengthening of the mandible by stimulating increased growth at the condylar cartilage. The Twin Block appliance is one of the most commonly used functional appliances. The aim of this paper is to present a case report of mandibular deficiency treatment with Twin Block appliance in a female patient whose sexual maturation (one and a half years after menarche and cervical vertebral maturation stage indicated the end of the growth peak. The treatment started with bonding 0.022 in MBT prescription brackets on the upper arch in order to align upper teeth and create a symmetric overjet. When reaching alignment, a modified Twin Block was given to the patient for 8 months. Final coordination was achieved with fixed appliances in both arches. At the end of the treatment, profile of the patient improved, crowding was relieved, and Cl I relationship with normal overjet and overbite was achieved.

  4. Discomfort associated with fixed orthodontic appliances: determinant factors and influence on quality of life

    Directory of Open Access Journals (Sweden)

    Leandro Silva Marques

    2014-06-01

    Full Text Available OBJECTIVE: To investigate the determinant factors of discomfort attributed to the use of fixed orthodontic appliance and the effect on the quality of life of adolescents. MATERIAL AND METHODS : Two hundred and seventy-two individuals aged between 9 and 18 years old, enrolled in public and private schools and undergoing orthodontic treatment with fixed appliance participated in this cross-sectional study. The participants were randomly selected from a sample comprising 62,496 individuals of the same age group. Data was collected by means of questionnaires and an interview. Discomfort intensity and bio-psychosocial variables were assessed using the Oral Impact on Daily Performance questionnaire. Self-esteem was determined using the Global Negative Self-Evaluation questionnaire. Statistical analysis involved the chi-square test and both simple and multiple Poisson regression analyses. RESULTS: Although most individuals did not present discomfort, there was a prevalence of 15.9% of impact on individuals' daily life exclusively due to the use of fixed orthodontic appliance . Age [PR: 3.2 (95% CI: 1.2-8.5], speech impairment [PR: 2.2 (95% CI: 1.1-4.6], poor oral hygiene [PR: 2.4 (95% CI: 1.2-4.8] and tooth mobility [PR: 3.9 (95% CI: 1.8-8.1] remained independently associated with a greater prevalence of discomfort (P ≤ 0.05. CONCLUSIONS: Discomfort associated with the use of fixed orthodontic appliances exerted a negative influence on the quality of life of the adolescents comprising the present study. The determinants of this association were age, poor oral hygiene, speech impairment and tooth mobility.

  5. Case Series of an Intraoral Balancing Appliance Therapy on Subjective Symptom Severity and Cervical Spine Alignment

    OpenAIRE

    2013-01-01

    Objective. The objective of this study was to investigate the effect of a holistic intraoral appliance (OA) on cervical spine alignment and subjective symptom severity. Design. An observational study on case series with holistic OA therapy. Setting. An outpatient clinic for holistic temporomandibular joint (TMJ) therapy under the supervision of the Pain Center, CHA Biomedical center, CHA University. Subjects. Ambulatory patients presenting with diverse chief complaints in the holistic TMJ cli...

  6. A Case Study of Marketing Strategy and Logistics System of Changhong, a Chinese Home Appliances Enterprise

    OpenAIRE

    Mao, Min; Li, Ruixue

    2007-01-01

    The growing process of Changhong, a representative Chinese home appliance enterprise, is described in this paper. Changhong succeeded in transforming from a former state-run military-radar factory into China’s leading consumer-electronics manufacturer. However it has been experiencing hardship since 1998 and reported significant losses in 2004.The success and failure of Changhong marketing strategy are expounded.This paper reports Changhong’s recent efforts in strategy shift. It shows Changho...

  7. Interceptive Orthodontics and Growth Modification Therapy with Fixed Functional Appliance: A Case Report

    Science.gov (United States)

    Ahuja, Jatin

    2011-01-01

    A 12-year-old female patient presented with proclined upper anteriors on a class II skeletal base, a retrognathic mandible and high maxillary- mandibular plane angle. Lower first molars were mesially tipped and lower second premolars were impacted. Treatment plan included uprighting and distalising the lower molars followed by growth modulation with Jasper Jumper to correct the mandibular retrognathism. Final finishing and detailing of occlusion was carried out through 0.022” MBT prescription preadjusted edgewise appliance therapy. PMID:27678237

  8. Development of a Moldable, Resorbable Appliance for Use in Maxillofacial Surgery

    Science.gov (United States)

    1991-06-27

    MAXILLOFACIAL SURGERY PRINCIPAL INVESTIGATOR: Augusto C. Ibay, Ph.D. CONTRACTING ORGANIZATION: Southern Research Institute 2000 Ninth Avenue South P.O. Box...SUBTITLE S. FUNDING NUMBERS Development of a Moldable, Resorbable appliance for ontract No. use in Maxillofacial surgery AMl7-90-C-.0024 6. AUTOR(S... maxillofacial surgery , it still has shortcomings that must be overcome before it can be conveniently used in a clinical setting, particularly those in mass

  9. Dentoskeletal effects of the fast-back molar distalizer followed by fixed appliances.

    Science.gov (United States)

    Buongiorno, Marco; Iacopetti, Francesca; Beretta, Matteo; Lanteri, Claudio; Defraia, Efisio

    2012-11-01

    The purpose of this study was to analyze the skeletal and dentoalveolar changes induced by the Fast-Back appliance followed by fixed appliances when compared with untreated Class II controls. The treated and untreated samples consisted of 27 subjects each (16 girls and 11 boys in the Fast-Back Group, FBG; 15 girls and 12 boys in the control Group, CG) with mean ages at the start of treatment of 13 years 3 months in the FBG and 13 years 2 months in the CG. Subjects of the FBG were treated during either the pubertal or postpubertal periods. Lateral cephalograms were analyzed at 2 observation periods: before distalization (T1) and after comprehensive orthodontic treatment appliance (T2). The T1-T2 changes in the FBG were contrasted with those in the CG by means of Mann-Whitney U test (pcorrection of molar relationship of 2.4mm. The significant correction of the overjet (2.1mm) was associated with a significant amount of lower incisor proclination (3.8 degrees). A significant extrusion of lower molars (1.8mm) was recorded in the FBG. The FBG showed also a significant increase in total mandibular length (Co-Gn, 2.6mm), a counterclockwise rotation of the palatal plane (1.4 degrees), an increase in anterior facial height (N-Me, 2.7 mm), and in mandibular ramus height (Co-Go, 2.6mm). The Fast-Back is an effective appliance for Class II correction during the pubertal or postpubertal periods. Copyright © 2012. Published by Elsevier Srl.

  10. German Resource Efficiency Programme (ProgRess). Programme for the sustainable utilization and protection of natural ressources. Decision of the Federal Cabinet from February 29, 2012; Deutsches Ressourceneffizienzprogramm (ProgRess). Programm zur nachhaltigen Nutzung und zum Schutz der natuerlichen Ressourcen. Beschluss des Bundeskabinetts vom 29.2.2012

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Reinhard; Miehe, Anne; Schwenk, Birgit (comps.)

    2012-05-14

    The Federal Cabinet adopted the German Resource Efficiency Programme (ProgRess) today. The goal of the Programme is to continuously increase raw material productivity in German industry through market incentives, research and innovation and advice, and thus to promote a further decoupling of our growth from resource consumption. ProgRess is the first comprehensive programme by the German government to address the sustainable use of raw materials. At the core of ProgRess are new strategic approaches, activities and examples geared towards increasing resource efficiency. The Programme covers the entire value chain. It is about securing a sustainable raw material supply, raising resource efficiency in production, steering consumption towards resource efficiency, enhancing resource-efficient closed cycle management and using overarching instruments. The Programme seeks to support voluntary measures and initiatives in industry and society. Examples include strengthening efficiency advice for small and medium-sized enterprises, supporting environmental management systems, integrating resource aspects into technical standardisation processes, placing greater emphasis on resource-efficient products and services in public procurement, strengthening voluntary product labelling and certification systems, enhancing closed cycle management and facilitating the transfer of technologies and knowledge to developing and emerging economies.

  11. Clinical effects of fixed functional Herbst appliance in the treatment of class II/1 malocclusion

    Directory of Open Access Journals (Sweden)

    Nedeljković Nenad

    2009-01-01

    Full Text Available Introduction. Sagittal mandible deficiency is the most common cause of skeletal Class II malocclusion. Treatment objective is to stimulate sagittal mandible growth. Fixed functional Herbst appliance use is beneficial for shortening the time required for treatment and does not depend on patient compliance. Case outline. A 13-year-old girl was referred to the Clinic of Orthodontics, School of Dentistry in Belgrade following previous unsuccessful treatment of her skeletal Class II malocclusion using an activator. The patient's poor cooperation had led to failure of the treatment. Patient was subjected to the Herbst treatment for 6 months followed by fixed appliance for another 8 months. Lateral cephalograms before and after the treatment was performed. The remodelation of condylar and fossal articulation was assessed by superimposition of pre- and post-treatment temporomandibular joint tomograms. The promotion of oral hygiene and fluoride use was performed because orthodontic treatment carries a high caries risk and risk for periodontal disease. Skeletal and dental changes were observed after treatment (correction [Max+Mand]: molar relation 7 mm, overjet 8 mm, skeletal relation 5 mm, molars 2 mm, incisors 3 mm. Combination of Herbst and fixed appliances was effective in the treatment of dental and skeletal irregularities for a short period of time. Conclusion . In the retention period, 14 months after treatment, occlusal stability exists. Follow-up care in oral prevention is based on regular recalls at the dental office and supervision at home by the parents.

  12. Steady state signatures in the time domain for nonintrusive appliance identification

    Directory of Open Access Journals (Sweden)

    Y. Jimenez

    2015-11-01

    Full Text Available Smart Grid paradigm promotes advanced load monitoring applications to support demand side management and energy savings. Recently, considerable attention has been paid to Non-Intrusive Load Monitoring to estimate the individual operation and power consumption of the residential appliances, from single point electrical measurements. This approach takes advantage of signal processing in order to reduce the hardware effort associated to systems with multiple dedicated sensors. Discriminative characteristics of the appliances, namely load signatures, could be extracted from the transient or steady state electrical signals. In this paper the effect of impact factors that can affect the steady state load signatures under realistic conditions are investigated: the voltage supply distortion, the network impedance and the sampling frequency of the metering equipment. For this purpose, electrical measurements of several residential appliances were acquired and processed to obtain some indices in the time domain. Results include the comparison of distinct scenarios, and the evaluation of the suitability and discrimination capacity of the steady state information.

  13. Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

    Directory of Open Access Journals (Sweden)

    Helder Baldi Jacob

    2014-01-01

    Full Text Available INTRODUCTION: Due to the lack of studies that distinguish between dentoalveolar and basal changes caused by the Thurow appliance, this clinical study, carried out by the School of Dentistry - State University of São Paulo/Araraquara, aimed at assessing the dental and skeletal changes induced by modified Thurow appliance. METHODS: The sample included an experimental group comprising 13 subjects aged between 7 and 10 years old, with Class II malocclusion and anterior open bite, and a control group comprising 22 subjects similar in age, sex and mandibular plane angle. Maxillary/mandibular, horizontal/vertical, dental/skeletal movements (ANS, PNS, U1, U6, Co, Go, Pog, L1, L6 were assessed, based on 14 landmarks, 8 angles (S-N-ANS, SNA, PPA, S-N-Pog, SNB, MPA, PP/MPA, ANB and 3 linear measures (N-Me, ANS-Me, S-Go. RESULTS: Treatment caused significantly greater angle decrease between the palatal and the mandibular plane of the experimental group, primarily due to an increase in the palatal plane angle. ANB, SNA and S-N-ANS angles significantly decreased more in patients from the experimental group. PNS was superiorly remodeled. Lower face height (ANS-Me decreased in the experimental group and increased in the control group. CONCLUSIONS: The modified Thurow appliance controlled vertical and horizontal displacements of the maxilla, rotated the maxilla and improved open bite malocclusion, decreasing lower facial height.

  14. Service oriented network architecture for control and management of home appliances

    Science.gov (United States)

    Hayakawa, Hiroshi; Koita, Takahiro; Sato, Kenya

    2005-12-01

    Recent advances in multimedia network systems and mechatronics have led to the development of a new generation of applications that associate the use of various multimedia objects with the behavior of multiple robotic actors. The connection of audio and video devices through high speed multimedia networks is expected to make the system more convenient to use. For example, many home appliances, such as a video camera, a display monitor, a video recorder, an audio system and so on, are being equipped with a communication interface in the near future. Recently some platforms (i.e. UPnP1, HAVi2 and so on) are proposed for constructing home networks; however, there are some issues to be solved to realize various services by connecting different equipment via the pervasive peer-to-peer network. UPnP offers network connectivity of PCs of intelligent home appliances, practically, which means to require a PC in the network to control other devices. Meanwhile, HAVi has been developed for intelligent AV equipments with sophisticated functions using high CPU power and large memory. Considering the targets of home alliances are embedded systems, this situation raises issues of software and hardware complexity, cost, power consumption and so on. In this study, we have proposed and developed the service oriented network architecture for control and management of home appliances, named SONICA (Service Oriented Network Interoperability for Component Adaptation), to address these issues described before.

  15. Clinical evaluation of periodontal health during orthodontic treatment with fixed appliances

    Directory of Open Access Journals (Sweden)

    Hănțoiu T.

    2014-12-01

    Full Text Available Objectives: Fixed orthodontic appliances make daily application of oral hygiene standard procedures more difficult and in time may lead to accumulation of oral biofilms and development of gingivitis and hyperplasia. The aim of the study is to evaluate the periodontal health expressed by clinical indices in patients under orthodontic treatment with fixed appliances, according to different oral hygene maintenance programs. Material and method: We performed a randomized prospective study on 60 patients with fixed orthodontic appliances (17-25 years of age devided in three study groups. The clnical indices recorded were: modified gingival index, plaque index and sulcular bleeding index. Statistical analysis or the results were carried out using Student t test. Results: The patients were randomly divided into three groups: group A-patients were instructed to use electric brush, water flosser and interdental brush, group B- electric brush, interdental brush and fluoride and group C- manual brushing and fluoride. Statistical comparison of the values of the indexes with the Student t test for independent samples showed statistically significant differences in all three groups of patients studied between initial and final values of all recorded clinical parameters. Conclusions: Fixed orthodontics do not induce periodontal disease if basic principles of oral hygiene are followed in compliant patients, which are correctly instructed to deal with real challenge, represented by complete elimination of debris and bacterial accumulation.

  16. Three-dimensional evaluation of changes in lip position from before to after orthodontic appliance removal

    Science.gov (United States)

    Eidson, Lindsey; Cevidanes, Lucia H. S.; de Paula, Leonardo Koerich; Hershey, H. Garland; Welch, Gregory; Rossouw, P. Emile

    2014-01-01

    Introduction Our objectives were to develop a reproducible method of superimposing 3-dimensional images for measuring soft-tissue changes over time and to use this method to document changes in lip position after the removal of orthodontic appliances. Methods Three-dimensional photographs of 50 subjects were made in repose and maximum intercuspation before and after orthodontic appliance removal with a stereo camera. For reliability assessment, 2 photographs were repeated for 15 patients. The images were registered on stable areas, and surface-to-surface measurements were made for defined landmarks. Results Mean changes were below the level of clinical significance (set at 1.5 mm). However, 51% and 18% of the subjects experienced changes greater than 1.5 mm at the commissures and lower lips, respectively. Conclusions The use of serial 3-dimensional photographs is a reliable method of documenting soft-tissue changes. Soft-tissue changes after appliance removal are not clinically significant; however, there is great individual variability. PMID:22920709

  17. Mechanical evaluation of quad-helix appliance made of low-nickel stainless steel wire

    Directory of Open Access Journals (Sweden)

    Rogério Lacerda dos Santos

    2013-06-01

    Full Text Available OBJECTIVE: The objective of this study was to test the hypothesis that there is no difference between stainless steel and low-nickel stainless steel wires as regards mechanical behavior. Force, resilience, and elastic modulus produced by Quad-helix appliances made of 0.032-inch and 0.036-inch wires were evaluated. METHODS: Sixty Quad-helix appliances were made, thirty for each type of alloy, being fifteen for each wire thickness, 0.032-in and 0.036-in. All the archwires were submitted to mechanical compression test using an EMIC DL-10000 machine simulating activations of 4, 6, 9, and 12 mm. Analysis of variance (ANOVA with multiple comparisons and Tukey's test were used (p < 0.05 to assess force, resilience, and elastic modulus. RESULTS: Statistically significant difference in the forces generated, resilience and elastic modulus were found between the 0.032-in 0.036-in thicknesses (p < 0.05. CONCLUSIONS: Appliances made of low-nickel stainless steel alloy had force, resilience, and elastic modulus similar to those made of stainless steel alloy.

  18. Changes in alveolar bone support induced by the Herbst appliance: a tomographic evaluation

    Directory of Open Access Journals (Sweden)

    João Paulo Schwartz

    2016-04-01

    Full Text Available ABSTRACT Objective: This study evaluated alveolar bone loss around mandibular incisors, induced by the Herbst appliance. Methods: The sample consisted of 23 patients (11 men, 12 women; mean age of 15.76 ± 1.75 years, Class II, Division 1 malocclusion, treated with the Herbst appliance. CBCT scans were obtained before treatment (T0 and after Herbst treatment (T1. Vertical alveolar bone level and alveolar bone thickness of mandibular incisors were assessed. Buccal (B, lingual (L and total (T bone thicknesses were assessed at crestal (1, midroot (2 and apical (3 levels of mandibular incisors. Student's t-test and Wilcoxon t-test were used to compare dependent samples in parametric and nonparametric cases, respectively. Pearson's and Spearman's rank correlation analyses were performed to determine the relationship of changes in alveolar bone thickness. Results were considered at a significance level of 5%. Results: Mandibular incisors showed no statistical significance for vertical alveolar bone level. Alveolar bone thickness of mandibular incisors significantly reduced after treatment at B1, B2, B3, T1 and significantly increased at L2. The magnitude of the statistically significant changes was less than 0.2 mm. The changes in alveolar bone thickness showed no statistical significance with incisor inclination degree. Conclusions: CBCT scans showed an association between the Herbst appliance and alveolar bone loss on the buccal surface of mandibular incisors; however, without clinical significance.

  19. The effects, limitations, and long-term dentofacial adaptations to treatment with the Herbst appliance.

    Science.gov (United States)

    Pancherz, H

    1997-12-01

    The purpose of this article is to summarize the existing scientific data with respect to the short- and long-term effects of the Herbst appliance on the occlusion and on the maxillo/mandibular complex. The article also discusses the treatment indications and possible treatment limitations. The Herbst method is most effective in the treatment of Class II malocclusions. Long-term stability seems to be dependent on a stable cuspal interdigitation. Marked mandibular morphological changes occur during therapy and sagittal condylar growth is increased. Posttreatment, most of the mandibular morphological changes revert and no long-term influence of Herbst treatment on mandibular growth can be verified. The appliance effect on the maxillary complex can be compared with that of a high-pull headgear. Without proper retention, however, this effect is of a temporary nature. Herbst treatment is especially indicated in the permanent dentition at or just after the pubertal peak of growth. Mixed dentition treatment is not recommended, as a stable cuspal interdigitation after therapy is difficult to achieve and relapses are prone to occur. In the nongrowing patient, the appliance should be used with great caution.

  20. Influence of the banded Herbst appliance on dental changes in mixed dentition

    Directory of Open Access Journals (Sweden)

    Luana Paz Sampaio

    2012-02-01

    Full Text Available OBJECTIVE: This prospective clinical study was conducted with the purpose of evaluating the influence of the banded Herbst appliance on dental changes during the early treatment of Class II malocclusion. METHOD: The sample consisted of 15 prepubertal subjects (12 boys and 3 girls, initial age: 9 years and 6 months who were treated with the Herbst appliance. Treatment effects were compared with those of a Class II Division 1 group of 15 subjects (8 boys and 7 girls, mean initial age 9 years and 1 month, not treated orthodontically. Statistical analysis was performed using Student t-test with 5% significance level. RESULTS: The results showed that treatment with the banded Herbst appliance in the mixed dentition stage tended to upright maxillary incisors (mean: 4.14°. The maxillary molars were distalized and intruded significantly (mean 2.65 mm and 1.24 mm, respectively, the lower incisors slightly protruded anteriorly (mean 1.64 mm and the molars showed no significant changes in the horizontal and vertical directions. Furthermore, significant improvements were noted in overbite (1.26 mm, overjet (4.8 mm and molar relationship (12.08 mm. CONCLUSIONS: Changes in the upper dental arch were found to be greater than changes in the lower arch. Furthermore, mandibular anchorage loss was reduced due to the anchorage system used in the study.

  1. Treatment timing of MARA and fixed appliance therapy of Class II malocclusion.

    Science.gov (United States)

    Ghislanzoni, Luis Tomas Huanca; Baccetti, Tiziano; Toll, Douglas; Defraia, Efisio; McNamara, James A; Franchi, Lorenzo

    2013-06-01

    The objective of this study is to evaluate the effect of timing on Mandibular Anterior Repositioning Appliance (MARA) and fixed appliance treatment of Class II malocclusion in a prospective clinical trial. The treated sample consisted of 51 consecutively treated patients at prepubertal (n = 21), pubertal (n = 15), and postpubertal (n = 15) stages of development. Control groups for the three treated groups were generated from growth data of untreated Class II subjects. Lateral cephalograms were digitized and superimposed via cephalometric software at T1 (pre-treatment) and T2 (after comprehensive treatment). The T1-T2 changes in the treated groups were compared to those in their corresponding control groups with Mann-Whitney tests with Bonferroni correction. Mandibular elongation was greater at the pubertal stage (Co-Gn +2.6 mm, with respect to controls). Headgear effect on the maxilla was greater in the pre-peak sample (Co-A -1.9 mm, with respect to controls). Dentoalveolar compensations (proclination of lower incisors, extrusion and mesialization of lower molars, and reduction in the overbite) were significant in the pre-peak and post-peak groups. Optimal timing for Class II treatment with MARA appliance is at the pubertal growth spurt, with enhanced mandibular skeletal changes and minimal dentoalveolar compensations.

  2. Household and caregiver characteristics and behaviours as predictors of unsafe exposure of children to paraffin appliances.

    Science.gov (United States)

    Van Niekerk, A; Govender, R; Hornsby, N; Swart, L

    2016-11-16

    This study examines adult safety knowledge and practices regarding the use of paraffin cooking appliances. The use of these is common in South Africa with injury risks that are poorly understood. This cross-sectional study was in an informal settlement in Johannesburg, South Africa, where children were reportedly at high risk for burns. This study sought to clarify relationships between key risks and developed individual and composite variables from theoretical constructs and operational definitions of risks for burns. Risks included Child Use of Paraffin Appliances, Child Proximity to Cooking, Risky Stove Use, Caregiver's Burn Treatment Knowledge, Children Locked in House, Children Alone in House. Number of children remains as in proof as this was not a composite scale. Child Proximity to Cooking was associated with more children in the home. Households where children were in greater proximity to cooking were 6 times more likely to be left alone at home, with caregivers with no education over 100 times more likely to lock their children at home. Children locked in were often from homes where caregivers used appliances unsafely. In settings with hazardous energy use, compressed household configurations, and families with multiple children, Risky Stove Use and the practice of locking children in the home may be catastrophic.

  3. The influence of orthodontic fixed appliances on the oral microbiota: A systematic review

    Directory of Open Access Journals (Sweden)

    Amanda Osório Ayres de Freitas

    2014-04-01

    Full Text Available Objective: To investigate whether there is scientific evidence to support the hypothesis that the presence of orthodontic fixed appliances influences the oral microbiota. Methods: The search for articles was conducted in PubMed; ISI Web of Knowledge and Ovid databases, including articles published in English until May 17th, 2012. They should report human observational studies presenting the following keywords: "fixed orthodontic appliance" AND "microbiological colonization"; OR "periodontal pathogens"; OR "Streptococcus"; OR "Lactobacillus"; OR "Candida"; OR "Tannerella forsythia"; OR "Treponema denticola"; OR "Fusobacterium nucleatum"; OR "Actimomyces actinomycetemcomitans"; OR "Prevotella intermedia", OR "Prevotella nigrescens"; OR "Porphyromonas gingivalis". Articles were previously selected by title and abstract. Articles that met the inclusion criteria were analyzed and classified as having low, moderate or high methodology quality. A new detailed checklist for quality assessment was developed based on the information required for applicable data extraction for reviews. The study design, sample, follow-up period, collection and microbial analysis methods, statistical treatment, results and discussion were assessed. Results: The initial search retrieved 305 articles of which 33 articles were selected by title and abstract. After full-text reading, 8 articles met the inclusion criteria, out of which 4 articles were classified as having low and 4 as moderate methodological quality. The moderate methodological quality studies were included in the systematic review. Conclusions: The literature revealed moderate evidence that the presence of fixed appliances influences the quantity and quality of oral microbiota.

  4. New challenges of Japanese energy efficiency program by Top Runner approach

    Energy Technology Data Exchange (ETDEWEB)

    Murakoshi, Chiharu; Nakagami, Hidetoshi [Jyukankyo Research Inst., Tokyo (Japan); Tsuruda, Masanori; Edamura, Nobuhisa [Ministry of Economy, Trade and Industry, Tokyo (Japan)

    2005-07-01

    The Top Runner standards are the key energy efficiency program in Japan. Last year, TVs and VCRs reached the target year for improvement in efficiency, and have improved their efficiencies far more than the original energy savings targets. In order to accelerate energy savings by the Top Runner approach, the Government of Japan is now planning to add new items, and moreover to strengthen the standards for TVs and VCRs. On the other hand, high prices of efficient appliances are considered by many to be the main factor preventing wider diffusion. In order to increase diffusion of efficient appliances by promoting sales, in 2003 the e-Shop Commendation System for retail stores was started, for 'stores that are excellent in promoting diffusion of energy-efficient appliances.' Until then it was quite rare to see products with their e-Mark energy-efficiency labels attached. Moreover, no incentive was given to retail stores to recommend efficient appliances to customers. Under the e-Shop Commendation System, we evaluated comprehensive measures for retail stores, such as the sales ratio of products achieving the standards, percentage of products with e-Mark labels attached, employee education programs, and creation of original posters. As a result of starting the e-Shop Commendation System, e-Mark labels have come to be posted on almost all appliances, original posters have been produced, and sales staffs are receiving instruction in selling points and how to talk with customers. We describe new challenges of the Top Runner program and the contents, evaluation method, and the considerable effect of the e-Shop Commendation System for retail stores.

  5. Relighting for energy efficiency and productivity

    Energy Technology Data Exchange (ETDEWEB)

    Harris, L. [USDOE, Washington, DC (United States); Purcell, C.W. [Pacific Northwest Lab., Richland, WA (United States)

    1992-10-01

    This paper presents an overview of the process and approach of the Federal Relighting Initiative (FRI). It describes the major steps in relighting Federal buildings for energy efficiency and increased productivity.

  6. Relighting for energy efficiency and productivity

    Energy Technology Data Exchange (ETDEWEB)

    Harris, L. (USDOE, Washington, DC (United States)); Purcell, C.W. (Pacific Northwest Lab., Richland, WA (United States))

    1992-01-01

    This paper presents an overview of the process and approach of the Federal Relighting Initiative (FRI). It describes the major steps in relighting Federal buildings for energy efficiency and increased productivity.

  7. Japan's Residential Energy Demand Outlook to 2030 Considering Energy Efficiency Standards"Top-Runner Approach"

    Energy Technology Data Exchange (ETDEWEB)

    Lacommare, Kristina S H; Komiyama, Ryoichi; Marnay, Chris

    2008-05-15

    As one of the measures to achieve the reduction in greenhouse gas emissions agreed to in the"Kyoto Protocol," an institutional scheme for determining energy efficiency standards for energy-consuming appliances, called the"Top-Runner Approach," was developed by the Japanese government. Its goal is to strengthen the legal underpinnings of various energy conservation measures. Particularly in Japan's residential sector, where energy demand has grown vigorously so far, this efficiency standard is expected to play a key role in mitigating both energy demand growth and the associated CO2 emissions. This paper presents an outlook of Japan's residential energy demand, developed by a stochastic econometric model for the purpose of analyzing the impacts of the Japan's energy efficiency standards, as well as the future stochastic behavior of income growth, demography, energy prices, and climate on the future energy demand growth to 2030. In this analysis, we attempt to explicitly take into consideration more than 30 kinds of electricity uses, heating, cooling and hot water appliances in order to comprehensively capture the progress of energy efficiency in residential energy end-use equipment. Since electricity demand, is projected to exhibit astonishing growth in Japan's residential sector due to universal increasing ownership of electric and other appliances, it is important to implement an elaborate efficiency standards policy for these appliances.

  8. Changes in soft tissue profile following the treatment using a Herbst appliance: A photographic analysis

    Directory of Open Access Journals (Sweden)

    Nedeljković Nenad

    2014-01-01

    Full Text Available Background/Aim. Aesthetics is the reason for most of the class II malocclusion patients to opt for orthodontic treatment. In order to regulate retrognathic profile Herbst appliance for anterior movement of the mandible can be a treatment of choice. The aim of this study was to determine the soft tissue profile changes following Herbst appliance therapy on before and after treatment photos, using the computer program. Methods. This investigation was performed on profile photographs of 20 class II patients (12 females and 8 males aged 18-23 years. Analysis of the changes in soft tissue facial structure relationships evident on the photographs before and after the Herbst appliance therapy was performed using Bentley Micro Station program. The first contour of the soft tissue profile was marked. The following reference lines were subsequently traced: Ricketts aesthetic E line and Juanita line. The area enclosed by these two lines included the nose, upper and lower lip, chin and free space in front of the lips. Using the computer program, the surfaces of the soft tissue structures and free space defined by the reference lines and profile contours were measured. Calculation of the relative proportion of surfaces was done for each photograph. The data obtained were then compared for each patient before and after the treatment. Skeletal and dentoalveolar treatment effects that support soft tissue changes were presented by the profile cephalometric parameters of sagital occlusion (SO analysis. Results. A reduction in the relative surface of the upper lip in males (p < 0.01 and females (p < 0.05 was shown by the pictures. The space occupied by the chin was reduced after the treatment for females only (p < 0.05. The relative surface of the nasal soft tissues, that was included in the reference space was increased (p < 0.01 in both genders. The relationship between the soft tissue and empty surface was changed in favor of the empty surface (p < 0.05 in

  9. Impact of Natural Gas Appliances on Pollutant Levels in California Homes

    Energy Technology Data Exchange (ETDEWEB)

    Mullen, Nasim A.; Li, Jina; Singer, Brett C.

    2012-12-01

    This report presents results from the first year of a 2-year study, investigating associations of five air pollutants (CO, NO2, NOX, formaldehyde and acetaldehyde) with the presence of natural gas appliances in California homes. From November 2011 to March 2012, pollutant concentration and occupant activity data were collected in 155 homes for 6-day periods. The sample population included both single-family (68%) and multi-family (32%) dwellings, with 87% having at least one gas appliance and 77% having an unvented gas cooking appliance. The geometric mean (GM) NO2 levels measured in the kitchen, bedroom and outside of homes were similar at values of 15, 12 and 11 ppb, respectively. In contrast, the GM NOx levels measured in the kitchen and bedroom of homes were much higher than levels measured outdoors, at levels of 42 and 41 ppb, compared to 19 ppb, respectively. Roughly 10% of sampled homes had 6-day average NO2 levels that exceeded the outdoor annual average limit set by the California Ambient Air Quality Standards (CAAQS) (30 ppb). The GMs of the highest 1-h and 8-h CO level measured in homes were 2.5 and 1.1 ppm, respectively. Four homes had a 1-h or 8-h concentration that exceeded the outdoor limits set by the CAAQS. The GM formaldehyde and acetaldehyde concentrations measured in homes were 15 and 7 ppb, respectively. Roughly 95% of homes had average formaldehyde levels indoors that exceeded the Chronic Reference Exposure Level set by the California EPA (7 ppb). Concentrations of NO2 and NOx, and to a lesser extent CO were associated with use of gas appliances, particularly unvented gas cooking appliances. Based on first principles, it is expected that effective venting of cooking pollutant emissions at the source will lead to a reduction of pollutant concentrations. However, no statistical association was detected between kitchen exhaust fan use and pollutant concentrations in homes in this study where gas cooking occurred frequently. The lack of

  10. TV Energy Consumption Trends and Energy-Efficiency Improvement Options

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Young; Phadke, Amol; Shah, Nihar; Letschert, Virginie

    2011-07-01

    The SEAD initiative aims to transform the global market by increasing the penetration of highly efficient equipment and appliances. SEAD is a government initiative whose activities and projects engage the private sector to realize the large global energy savings potential from improved appliance and equipment efficiency. SEAD seeks to enable high-level global action by informing the Clean Energy Ministerial dialogue as one of the initiatives in the Global Energy Efficiency Challenge. In keeping with its goal of achieving global energy savings through efficiency, SEAD was approved as a task within the International Partnership for Energy Efficiency Cooperation (IPEEC) in January 2010. SEAD partners work together in voluntary activities to: (1) ?raise the efficiency ceiling? by pulling super-efficient appliances and equipment into the market through cooperation on measures like incentives, procurement, awards, and research and development (R&D) investments; (2) ?raise the efficiency floor? by working together to bolster national or regional policies like minimum efficiency standards; and (3) ?strengthen the efficiency foundations? of programs by coordinating technical work to support these activities. Although not all SEAD partners may decide to participate in every SEAD activity, SEAD partners have agreed to engage actively in their particular areas of interest through commitment of financing, staff, consultant experts, and other resources. In addition, all SEAD partners are committed to share information, e.g., on implementation schedules for and the technical detail of minimum efficiency standards and other efficiency programs. Information collected and created through SEAD activities will be shared among all SEAD partners and, to the extent appropriate, with the global public.As of April 2011, the governments participating in SEAD are: Australia, Brazil, Canada, the European Commission, France, Germany, India, Japan, Korea, Mexico, Russia, South Africa, Sweden

  11. Federalism, Agenda Setting, and the Dynamics of Federal Education Policy.

    Science.gov (United States)

    Manna, Paul

    This paper is part of a larger project on agenda setting in the U.S. federal system and the development of the federal education agenda since 1965. Two questions motivate the paper, one theoretical and the other empirical: (1) how does federalism affect the federal agenda?; and (2) what explains the development of federal involvement in K-12…

  12. Driving Extreme Efficiency to Market

    Science.gov (United States)

    Garbesi, Karina

    2014-03-01

    The rapid development of extremely energy efficient appliances and equipment is essential to curtail catastrophic climate disruption. This will require the on-going development of products that apply all best-practices and that take advantage of the synergies of hybridization and building integration. Beyond that, it requires the development of new disruptive technologies and concepts. To facilitate these goals, in 2011 the Lawrence Berkeley National Laboratory and the U.S. Department of Energy launched the Max Tech and Beyond Design Competition for Ultra-Low-Energy-Use Appliances and Equipment. Now in its third year, the competition supports faculty-lead student design teams at U.S. universities to develop and test new technology prototypes. This talk describes what the competition and the Max Tech Program are doing to drive such rapid technology progress and to facilitate the entry to the market of successful Max Tech prototypes. The talk also initiates a discussion of physicists' unique role in driving that technology progress faster and farther. Emerging Technologies, Building Technologies Office, U.S. Department of Energy.

  13. Merging {DBMs} Efficiently

    DEFF Research Database (Denmark)

    David, Alexandre

    2005-01-01

    In this paper we present different algorithms to reduce the number of DBMs in federations by merging them. Federations are unions of DBMs and are used to represent non-convex zones. Inclusion checking between DBMs is a limited technique to reduce the size of federations and how to choose some DBM...... to merge them into a larger one is a combi-natorial problem. We present a number of simple but efficient techniques to avoid searching the combinations while still being able to merge any number of DBMs...

  14. ACA Federal Upper Limits

    Data.gov (United States)

    U.S. Department of Health & Human Services — Affordable Care Act Federal Upper Limits (FUL) based on the weighted average of the most recently reported monthly average manufacturer price (AMP) for...

  15. China Disabled Persons' Federation

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    China Disabled Persons' Federation (CDPF), founded in Beijing in 1988, is a national organization of/for all persons with disabilities (PWDs) of different categories in China. Mr. Deng Pufang is currently the Chairman.

  16. Federal Ballpark Estimator

    Data.gov (United States)

    Office of Personnel Management — The Federal Ballpark E$timate(R) was developed by the Employee Benefit Research Institute(R) and its American Savings Education Council(R) (ASEC(R)) program. It is...

  17. New Mexico Federal Lands

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This map layer consists of federally owned or administered lands of the United States, Puerto Rico, and the U.S. Virgin Islands. Only areas of 640 acres or more are...

  18. Estimate of Cost-Effective Potential for Minimum Efficiency Performance Standards in 13 Major World Economies Energy Savings, Environmental and Financial Impacts

    Energy Technology Data Exchange (ETDEWEB)

    Letschert, Virginie E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bojda, Nicholas [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ke, Jing [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McNeil, Michael A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-07-01

    This study analyzes the financial impacts on consumers of minimum efficiency performance standards (MEPS) for appliances that could be implemented in 13 major economies around the world. We use the Bottom-Up Energy Analysis System (BUENAS), developed at Lawrence Berkeley National Laboratory (LBNL), to analyze various appliance efficiency target levels to estimate the net present value (NPV) of policies designed to provide maximum energy savings while not penalizing consumers financially. These policies constitute what we call the “cost-effective potential” (CEP) scenario. The CEP scenario is designed to answer the question: How high can we raise the efficiency bar in mandatory programs while still saving consumers money?

  19. Integrated vs. Federated Search

    DEFF Research Database (Denmark)

    Løvschall, Kasper

    2009-01-01

    Oplæg om forskelle og ligheder mellem integrated og federated search i bibliotekskontekst. Holdt ved temadag om "Integrated Search - samsøgning i alle kilder" på Danmarks Biblioteksskole den 22. januar 2009.......Oplæg om forskelle og ligheder mellem integrated og federated search i bibliotekskontekst. Holdt ved temadag om "Integrated Search - samsøgning i alle kilder" på Danmarks Biblioteksskole den 22. januar 2009....

  20. Real-Time Recognition Non-Intrusive Electrical Appliance Monitoring Algorithm for a Residential Building Energy Management System

    Directory of Open Access Journals (Sweden)

    Kofi Afrifa Agyeman

    2015-08-01

    Full Text Available The concern of energy price hikes and the impact of climate change because of energy generation and usage forms the basis for residential building energy conservation. Existing energy meters do not provide much information about the energy usage of the individual appliance apart from its power rating. The detection of the appliance energy usage will not only help in energy conservation, but also facilitate the demand response (DR market participation as well as being one way of building energy conservation. However, energy usage by individual appliance is quite difficult to estimate. This paper proposes a novel approach: an unsupervised disaggregation method, which is a variant of the hidden Markov model (HMM, to detect an appliance and its operation state based on practicable measurable parameters from the household energy meter. Performing experiments in a practical environment validates our proposed method. Our results show that our model can provide appliance detection and power usage information in a non-intrusive manner, which is ideal for enabling power conservation efforts and participation in the demand response market.