W-transform method for feature-oriented multiresolution image retrieval

Energy Technology Data Exchange (ETDEWEB)

Kwong, M.K.; Lin, B. [Argonne National Lab., IL (United States). Mathematics and Computer Science Div.

1995-07-01

Image database management is important in the development of multimedia technology. Since an enormous amount of digital images is likely to be generated within the next few decades in order to integrate computers, television, VCR, cables, telephone and various imaging devices. Effective image indexing and retrieval systems are urgently needed so that images can be easily organized, searched, transmitted, and presented. Here, the authors present a local-feature-oriented image indexing and retrieval method based on Kwong, and Tang`s W-transform. Multiresolution histogram comparison is an effective method for content-based image indexing and retrieval. However, most recent approaches perform multiresolution analysis for whole images but do not exploit the local features present in the images. Since W-transform is featured by its ability to handle images of arbitrary size, with no periodicity assumptions, it provides a natural tool for analyzing local image features and building indexing systems based on such features. In this approach, the histograms of the local features of images are used in the indexing, system. The system not only can retrieve images that are similar or identical to the query images but also can retrieve images that contain features specified in the query images, even if the retrieved images as a whole might be very different from the query images. The local-feature-oriented method also provides a speed advantage over the global multiresolution histogram comparison method. The feature-oriented approach is expected to be applicable in managing large-scale image systems such as video databases and medical image databases.

On-line nuclear orientation

International Nuclear Information System (INIS)

Krane, K.S.

1990-01-01

This grant has as its overall goal the pursuit of on-line nuclear orientation experiments for the purpose of eliciting details of nuclear structure from the decays of neutron-deficient nuclei, such as those produced by the Holifield Heavy-Ion Research Facility at Oak Ridge and extracted by the UNISOR Isotope Separator. This paper discusses: refrigerator development; the decay of 184 Au; the decay of 191 Hg to 191 Au; the decay of 189 Pt to 189 Ir; the decays of 109,111 Pd; the decay of 172 Er; and solid angle corrections

Modular production line optimization: The exPLORE architecture

Directory of Open Access Journals (Sweden)

Spinellis Diomidis D.

2000-01-01

Full Text Available The general design problem in serial production lines concerns the allocation of resources such as the number of servers, their service rates, and buffers given production-specific constraints, associated costs, and revenue projections. We describe the design of exPLOre: a modular, object-oriented, production line optimization software architecture. An abstract optimization module can be instantiated using a variety of stochastic optimization methods such as simulated annealing and genetic algorithms. Its search space is constrained by a constraint checker while its search direction is guided by a cost analyser which combines the output of a throughput evaluator with the business model. The throughput evaluator can be instantiated using Markovian, generalised queueing network methods, a decomposition, or an expansion method algorithm.

Orientation of X Lines in Asymmetric Magnetic Reconnection-Mass Ratio Dependency

Science.gov (United States)

Liu, Yi-Hsin; Hesse, M.; Kuznetsova, M.

2015-01-01

Using fully kinetic simulations, we study the X line orientation of magnetic reconnection in an asymmetric configuration. A spatially localized perturbation is employed to induce a single X line, which has sufficient freedom to choose its orientation in three-dimensional systems. The effect of ion to electron mass ratio is investigated, and the X line appears to bisect the magnetic shear angle across the current sheet in the large mass ratio limit. The orientation can generally be deduced by scanning through the corresponding 2-D simulations to find the reconnection plane that maximizes the peak reconnection electric field. The deviation from the bisection angle in the lower mass ratio limit is consistent with the orientation shift of the most unstable linear tearing mode in an electron-scale current sheet.

An object-oriented feature-based design system face-based detection of feature interactions

International Nuclear Information System (INIS)

Ariffin Abdul Razak

1999-01-01

This paper presents an object-oriented, feature-based design system which supports the integration of design and manufacture by ensuring that part descriptions fully account for any feature interactions. Manufacturing information is extracted from the feature descriptions in the form of volumes and Tool Access Directions, TADs. When features interact, both volumes and TADs are updated. This methodology has been demonstrated by developing a prototype system in which ACIS attributes are used to record feature information within the data structure of the solid model. The system implemented in the C++ programming language and embedded in a menu-driven X-windows user interface to the ACIS 3D Toolkit. (author)

Defining project scenarios for the agile requirements engineering product-line development questionnaire

OpenAIRE

Feng, Kunwu; Lempert, Meli; Tang, Yan; Tian, Kun; Cooper, Kendra M.L.; Franch Gutiérrez, Javier

2007-01-01

Current agile methods are focused on practices of small, rapid developing and iteration, more people oriented, less documentation projects, and the use of the methods in large, product line projects are somehow difficult. UTD and GESSI have started a project to develop an expert system that can assist a requirements enginer in selecting a requirements engineering process that is well suited for their project, in particular with respect to the use of agile and product line engineering methods....

Top-down contingent feature-specific orienting with and without awareness of the visual input.

Science.gov (United States)

Ansorge, Ulrich; Horstmann, Gernot; Scharlau, Ingrid

2011-01-01

In the present article, the role of endogenous feature-specific orienting for conscious and unconscious vision is reviewed. We start with an overview of orienting. We proceed with a review of masking research, and the definition of the criteria of experimental protocols that demonstrate endogenous and exogenous orienting, respectively. Against this background of criteria, we assess studies of unconscious orienting and come to the conclusion that so far studies of unconscious orienting demonstrated endogenous feature-specific orienting. The review closes with a discussion of the role of unconscious orienting in action control.

Summary remarks and future prospects for on-line nuclear orientation

International Nuclear Information System (INIS)

Krane, K.S.; Hamilton, J.H.

1984-01-01

Results from various groups which use on-line low temperature nuclear orientation techniques are presented. Several nuclear parameters have been successfully studied: rotational levels, nuclear deformation, and decay modes. Future prospects include multiparameter analysis, relaxation and pre-orientation, new separators, and alpha decay studies. 33 refs., 5 figs

Representation and Metrics Extraction from Feature Basis: An Object Oriented Approach

Directory of Open Access Journals (Sweden)

Fausto Neri da Silva Vanin

2010-10-01

Full Text Available This tutorial presents an object oriented approach to data reading and metrics extraction from feature basis. Structural issues about basis are discussed first, then the Object Oriented Programming (OOP is aplied to modeling the main elements in this context. The model implementation is then discussed using C++ as programing language. To validate the proposed model, we apply on some feature basis from the University of Carolina, Irvine Machine Learning Database.

Secondary iris recognition method based on local energy-orientation feature

Science.gov (United States)

Huo, Guang; Liu, Yuanning; Zhu, Xiaodong; Dong, Hongxing

2015-01-01

This paper proposes a secondary iris recognition based on local features. The application of the energy-orientation feature (EOF) by two-dimensional Gabor filter to the extraction of the iris goes before the first recognition by the threshold of similarity, which sets the whole iris database into two categories-a correctly recognized class and a class to be recognized. Therefore, the former are accepted and the latter are transformed by histogram to achieve an energy-orientation histogram feature (EOHF), which is followed by a second recognition with the chi-square distance. The experiment has proved that the proposed method, because of its higher correct recognition rate, could be designated as the most efficient and effective among its companion studies in iris recognition algorithms.

Personal recognition using finger knuckle shape oriented features and texture analysis

Directory of Open Access Journals (Sweden)

K. Usha

2016-10-01

Full Text Available Finger knuckle print is considered as one of the emerging hand biometric traits due to its potentiality toward the identification of individuals. This paper contributes a new method for personal recognition using finger knuckle print based on two approaches namely, geometric and texture analyses. In the first approach, the shape oriented features of the finger knuckle print are extracted by means of angular geometric analysis and then integrated to achieve better precision rate. Whereas, the knuckle texture feature analysis is carried out by means of multi-resolution transform known as Curvelet transform. This Curvelet transform has the ability to approximate curved singularities with minimum number of Curvelet coefficients. Since, finger knuckle patterns mainly consist of lines and curves, Curvelet transform is highly suitable for its representation. Further, the Curvelet transform decomposes the finger knuckle image into Curvelet sub-bands which are termed as ‘Curvelet knuckle’. Finally, principle component analysis is applied on each Curvelet knuckle for extracting its feature vector through the covariance matrix derived from their Curvelet coefficients. Extensive experiments were conducted using PolyU database and IIT finger knuckle database. The experimental results confirm that, our proposed method shows a high recognition rate of 98.72% with lower false acceptance rate of 0.06%.

Sexual Orientation and Borderline Personality Disorder Features in a Community Sample of Adolescents.

Science.gov (United States)

Reuter, Tyson R; Sharp, Carla; Kalpakci, Allison H; Choi, Hye J; Temple, Jeff R

2016-10-01

Empirical literature demonstrates that sexual minorities are at an increased risk of developing psychopathology, including borderline personality disorder (BPD). The specific link between sexual orientation and BPD has received significantly less attention in youth, and it remains unclear what drives this relation. Given that there are higher rates of psychopathology in both sexual minorities and individuals with BPD, the present study aimed to determine if sexual orientation uniquely contributes to borderline personality pathology, controlling for other psychopathology. An ethnically diverse sample of 835 adolescents completed self-report measures of borderline features, depression, anxiety, and sexual orientation. Sexual minorities scored higher on borderline features compared to heterosexual adolescents. When controlling for depression and anxiety, sexual orientation remained significantly associated with borderline features. The relation between sexual orientation and BPD cannot fully be explained by other psychopathology. Future research is necessary to understand potential mechanisms underlying this relation.

Classification of line features from remote sensing data

OpenAIRE

Kolankiewiczová, Soňa

2009-01-01

This work deals with object-based classification of high resolution data. The aim of the thesis (paper, work) is to develope an acceptable classification process of linear features (roads and railways) from high-resolution satellite images. The first part shows different approaches of the linear feature classification and compares theoretic differences between an object-oriented and a pixel-based classification. Linear feature classification was created in the second part. The high-resolution...

Developing a survey to collect expertise in agile product line requirements engineering processes

OpenAIRE

Feng, Kunwu; Lempert, Meli; Tang, Yan; Tian, Kun; Cooper, Kendra M.L.; Franch Gutiérrez, Javier

2007-01-01

Current agile methods are focused on practices of small, rapid developing and iteration, more people oriented, less documentation projects, and the use of the methods in large, product line projects are somehow difficult. UTD and GESSI have started a project to develop an expert system that can assist a requirements enginer in selecting a requirements engineering process that is well suited for their project, in particular with respect to the use of agile and product line engineering methods....

On line nuclear orientation: opportunity and challenge

International Nuclear Information System (INIS)

Stone, N.J.

1985-01-01

The development of the on-line nuclear orientation (OLNO) technique is reviewed. The present potential of the technique is discussed in the light of the attainable temperatures, the use of ion implantation and the required isotope flux. Limitations associated with spin-lattice relaxation are considered in some detail and a survey of accessible nuclei is presented. An outline comparison is given between OLNO and other methods for producing orientation of nuclei, for measuring nuclear spins and static moments and for the study of level structure and transition probabilities. The conclusion is drawn that the method in its present form has extensive potential over a wide range of nuclei. Future prospects for in-beam polarisation giving access to nuclei of shorter half lives are referred to briefly. (Auth.)

Change impact analysis for software product lines

Directory of Open Access Journals (Sweden)

Jihen Maâzoun

2016-10-01

Full Text Available A software product line (SPL represents a family of products in a given application domain. Each SPL is constructed to provide for the derivation of new products by covering a wide range of features in its domain. Nevertheless, over time, some domain features may become obsolete with the apparition of new features while others may become refined. Accordingly, the SPL must be maintained to account for the domain evolution. Such evolution requires a means for managing the impact of changes on the SPL models, including the feature model and design. This paper presents an automated method that analyzes feature model evolution, traces their impact on the SPL design, and offers a set of recommendations to ensure the consistency of both models. The proposed method defines a set of new metrics adapted to SPL evolution to identify the effort needed to maintain the SPL models consistently and with a quality as good as the original models. The method and its tool are illustrated through an example of an SPL in the Text Editing domain. In addition, they are experimentally evaluated in terms of both the quality of the maintained SPL models and the precision of the impact change management.

Feature-based and object-based attention orientation during short-term memory maintenance.

Science.gov (United States)

Ku, Yixuan

2015-12-01

Top-down attention biases the short-term memory (STM) processing at multiple stages. Orienting attention during the maintenance period of STM by a retrospective cue (retro-cue) strengthens the representation of the cued item and improves the subsequent STM performance. In a recent article, Backer et al. (Backer KC, Binns MA, Alain C. J Neurosci 35: 1307-1318, 2015) extended these findings from the visual to the auditory domain and combined electroencephalography to dissociate neural mechanisms underlying feature-based and object-based attention orientation. Both event-related potentials and neural oscillations explained the behavioral benefits of retro-cues and favored the theory that feature-based and object-based attention orientation were independent. Copyright © 2015 the American Physiological Society.

Exterior orientation of CBERS-2B imagery using multi-feature control and orbital data

Science.gov (United States)

Marcato Junior, J.; Tommaselli, A. M. G.

2013-05-01

The major contribution of this paper relates to the practical advantages of combining Ground Control Points (GCPs), Ground Control Lines (GCLs) and orbital data to estimate the exterior orientation parameters of images collected by CBERS-2B (China-Brazil Earth Resources Satellite) HRC (High-resolution Camera) and CCD (High-resolution CCD Camera) sensors. Although the CBERS-2B is no longer operational, its images are still being used in Brazil, and the next generations of the CBERS satellite will have sensors with similar technical features, which motivates the study presented in this paper. The mathematical models that relate the object and image spaces are based on collinearity (for points) and coplanarity (for lines) conditions. These models were created in an in-house developed software package called TMS (Triangulation with Multiple Sensors) with multi-feature control (GCPs and GCLs). Experiments on a block of four CBERS-2B HRC images and on one CBERS-2B CCD image were performed using both models. It was observed that the combination of GCPs and GCLs provided better bundle block adjustment results than conventional bundle adjustment using only GCPs. The results also demonstrate the advantages of using primarily orbital data when the number of control entities is reduced.

Detailed design of product oriented manufacturing systems

OpenAIRE

Silva, Sílvio Carmo; Alves, Anabela Carvalho

2006-01-01

This paper presents a procedure for the detailed design and redesign of manufacturing systems within a framework of constantly fitting production system configuration to the varying production needs of products. With such an approach is achieved the design of Product Oriented Manufacturing Systems – POMS. This approach is in opposition to the fitting, before hand, of a production system to all products within a company. In this case is usual to adopt a Function Oriented Manufactur...

Summary remarks and prospects for on-line nuclear orientation

International Nuclear Information System (INIS)

Krane, K.S.; Hamilton, J.H.

1984-01-01

This paper reviews the use of on-line nuclear orientations as a method for determining hyperfine structure. Historical developments and future prospects for the technique are presented. The role that this technique can play in nuclear spectroscopy and the study of nuclei far from the beta stability are outlined

Feature integration and spatial attention: common processes for endogenous and exogenous orienting.

Science.gov (United States)

Henderickx, David; Maetens, Kathleen; Soetens, Eric

2010-05-01

Briand (J Exp Psychol Hum Percept Perform 24:1243-1256, 1998) and Briand and Klein (J Exp Psychol Hum Percept Perform 13:228-241, 1987) demonstrated that spatial cueing effects are larger for detecting conjunction of features than for detecting simple features when spatial attention is oriented exogenously, and not when attention is oriented endogenously. Their results were interpreted as if only exogenous attention affects the posterior spatial attention system that performs the feature binding function attributed to spatial attention by Treisman's feature integration theory (FIT; 1980). In a series of 6 experiments, we attempted to replicate Briand's findings. Manipulations of distractor string size and symmetry of stimulus presentation left and right from fixation were implemented in Posner's cueing paradigm. The data indicate that both exogenous and endogenous cueing address the same attentional mechanism needed for feature binding. The results also limit the generalisability of Briand's proposal concerning the role of exogenous attention in feature integration. Furthermore, the importance to control the effect of unintended attentional capture in a cueing task is demonstrated.

Orienting in virtual environments: How are surface features and environmental geometry weighted in an orientation task?

Science.gov (United States)

Kelly, Debbie M; Bischof, Walter F

2008-10-01

We investigated how human adults orient in enclosed virtual environments, when discrete landmark information is not available and participants have to rely on geometric and featural information on the environmental surfaces. In contrast to earlier studies, where, for women, the featural information from discrete landmarks overshadowed the encoding of the geometric information, Experiment 1 showed that when featural information is conjoined with the environmental surfaces, men and women encoded both types of information. Experiment 2 showed that, although both types of information are encoded, performance in locating a goal position is better if it is close to a geometrically or featurally distinct location. Furthermore, although features are relied upon more strongly than geometry, initial experience with an environment influences the relative weighting of featural and geometric cues. Taken together, these results show that human adults use a flexible strategy for encoding spatial information.

Image classification independent of orientation and scale

Science.gov (United States)

Arsenault, Henri H.; Parent, Sebastien; Moisan, Sylvain

1998-04-01

The recognition of targets independently of orientation has become fairly well developed in recent years for in-plane rotation. The out-of-plane rotation problem is much less advanced. When both out-of-plane rotations and changes of scale are present, the problem becomes very difficult. In this paper we describe our research on the combined out-of- plane rotation problem and the scale invariance problem. The rotations were limited to rotations about an axis perpendicular to the line of sight. The objects to be classified were three kinds of military vehicles. The inputs used were infrared imagery and photographs. We used a variation of a method proposed by Neiberg and Casasent, where a neural network is trained with a subset of the database and a minimum distances from lines in feature space are used for classification instead of nearest neighbors. Each line in the feature space corresponds to one class of objects, and points on one line correspond to different orientations of the same target. We found that the training samples needed to be closer for some orientations than for others, and that the most difficult orientations are where the target is head-on to the observer. By means of some additional training of the neural network, we were able to achieve 100% correct classification for 360 degree rotation and a range of scales over a factor of five.

On-line Peer Review in Teaching Design-oriented Courses

Directory of Open Access Journals (Sweden)

Hai Ning

2004-02-01

Full Text Available Peer review has been one of the very important designfacilitating processes practiced in education field, particularly in design-oriented courses such as MIT's 2.007 Robot Design. Typically students exchange ideas sketched on a piece of paper and critique on each other's design within a small team. We designed PREP web application backed up by a range of web services that handle the peer-review process on-line, and we argue that this is a significant step towards supporting designoriented course on-line. We believe that the lessons learned could be applied to other interested institutes that offer designoriented courses.

Preferred orientation determination using line source x-ray diffraction

International Nuclear Information System (INIS)

Kimmel, G.; Shmarjahu, D.

1977-10-01

A texture goniometer has been attached to a diffractometer connected to a line-focus x-ray source. Reasonable results are obtained for the texture of rolled sheets and the test procedure is given. To illustrate the test procedure, the determination of preferred orientation in cold-rolled copper is described, as compared with random powder of sintered copper. Improvements of the measurements are proposed

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

Robust Sensor-Orientation-Independent Feature Selection for Animal Activity Recognition on Collar Tags

NARCIS (Netherlands)

Kamminga, Jacob Wilhelm; Le Viet Duc, Duc Viet; Meijers, Jan Pieter; Bisby, Helena C.; Meratnia, Nirvana; Havinga, Paul J.M.

2018-01-01

Fundamental challenges faced by real-time animal activity recognition include variation in motion data due to changing sensor orientations, numerous features, and energy and processing constraints of animal tags. This paper aims at finding small optimal feature sets that are lightweight and robust

Product line design

Czech Academy of Sciences Publication Activity Database

Anderson, S. P.; Celik, Levent

2015-01-01

Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

A Product Line Enhanced Unified Process

DEFF Research Database (Denmark)

Zhang, Weishan; Kunz, Thomas

2006-01-01

The Unified Process facilitates reuse for a single system, but falls short handling multiple similar products. In this paper we present an enhanced Unified Process, called UPEPL, integrating the product line technology in order to alleviate this problem. In UPEPL, the product line related activit...... activities are added and could be conducted side by side with other classical UP activities. In this way both the advantages of Unified Process and software product lines could co-exist in UPEPL. We show how to use UPEPL with an industrial mobile device product line in our case study....

Orientations for the successful categorization of facial expressions and their link with facial features.

Science.gov (United States)

Duncan, Justin; Gosselin, Frédéric; Cobarro, Charlène; Dugas, Gabrielle; Blais, Caroline; Fiset, Daniel

2017-12-01

Horizontal information was recently suggested to be crucial for face identification. In the present paper, we expand on this finding and investigate the role of orientations for all the basic facial expressions and neutrality. To this end, we developed orientation bubbles to quantify utilization of the orientation spectrum by the visual system in a facial expression categorization task. We first validated the procedure in Experiment 1 with a simple plaid-detection task. In Experiment 2, we used orientation bubbles to reveal the diagnostic-i.e., task relevant-orientations for the basic facial expressions and neutrality. Overall, we found that horizontal information was highly diagnostic for expressions-surprise excepted. We also found that utilization of horizontal information strongly predicted performance level in this task. Despite the recent surge of research on horizontals, the link with local features remains unexplored. We were thus also interested in investigating this link. In Experiment 3, location bubbles were used to reveal the diagnostic features for the basic facial expressions. Crucially, Experiments 2 and 3 were run in parallel on the same participants, in an interleaved fashion. This way, we were able to correlate individual orientation and local diagnostic profiles. Our results indicate that individual differences in horizontal tuning are best predicted by utilization of the eyes.

Top-Down and Bottom-Up Approach for Model-Based Testing of Product Lines

Directory of Open Access Journals (Sweden)

Stephan Weißleder

2013-03-01

Full Text Available Systems tend to become more and more complex. This has a direct impact on system engineering processes. Two of the most important phases in these processes are requirements engineering and quality assurance. Two significant complexity drivers located in these phases are the growing number of product variants that have to be integrated into the requirements engineering and the ever growing effort for manual test design. There are modeling techniques to deal with both complexity drivers like, e.g., feature modeling and model-based test design. Their combination, however, has been seldom the focus of investigation. In this paper, we present two approaches to combine feature modeling and model-based testing as an efficient quality assurance technique for product lines. We present the corresponding difficulties and approaches to overcome them. All explanations are supported by an example of an online shop product line.

A comparison of paper-and-pencil and computerized forms of Line Orientation and Enhanced Cued Recall Tests.

Science.gov (United States)

Aşkar, Petek; Altun, Arif; Cangöz, Banu; Cevik, Vildan; Kaya, Galip; Türksoy, Hasan

2012-04-01

The purpose of this study was to assess whether a computerized battery of neuropsychological tests could produce similar results as the conventional forms. Comparisons on 77 volunteer undergraduates were carried out with two neuropsychological tests: Line Orientation Test and Enhanced Cued Recall Test. Firstly, students were assigned randomly across the test medium (paper-and-pencil versus computerized). Secondly, the groups were given the same test in the other medium after a 30-day interval between tests. Results showed that the Enhanced Cued Recall Test-Computer-based did not correlate with the Enhanced Cued Recall Test-Paper-and-pencil results. Line Orientation Test-Computer-based scores, on the other hand, did correlate significantly with the Line Orientation Test-Paper-and-pencil version. In both tests, scores were higher on paper-and-pencil tests compared to computer-based tests. Total score difference between modalities was statistically significant for both Enhanced Cued Recall Tests and for the Line Orientation Test. In both computer-based tests, it took less time for participants to complete the tests.

Image Mosaic Method Based on SIFT Features of Line Segment

Directory of Open Access Journals (Sweden)

Jun Zhu

2014-01-01

Full Text Available This paper proposes a novel image mosaic method based on SIFT (Scale Invariant Feature Transform feature of line segment, aiming to resolve incident scaling, rotation, changes in lighting condition, and so on between two images in the panoramic image mosaic process. This method firstly uses Harris corner detection operator to detect key points. Secondly, it constructs directed line segments, describes them with SIFT feature, and matches those directed segments to acquire rough point matching. Finally, Ransac method is used to eliminate wrong pairs in order to accomplish image mosaic. The results from experiment based on four pairs of images show that our method has strong robustness for resolution, lighting, rotation, and scaling.

A/T test system for production line; Seisan line yo A/T test system

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-10

This paper introduces an A/T test system for production line made by Meidensha, Inc. Rates and technology of mounting auto-transmissions (A/T) in recent automobiles are improving year after year. A/T production line testers were fabricated and supplied, including those for European countries. This system has the following features: the system employs low inertia AC motor, and is capable of performing tests in close conditions to actual cars; an insulated gate bipolar transistor (IGBT) inverter was employed to achieve control accuracy improvement and noise reduction; high-velocity transient measurement is possible by using a computer system based on the WindowsNT; a solenoid current slant control was employed to respond to electronically controlled A/T; and noise and vibration shift feeling instrumentation can also be used on option. Number of supply is four sets of front engine/front wheel drive (FF) car A/T testers for overseas countries, and two sets of FF A/T tests for use in Japan. (NEDO)

Point Cloud Analysis for Uav-Borne Laser Scanning with Horizontally and Vertically Oriented Line Scanners - Concept and First Results

Science.gov (United States)

Weinmann, M.; Müller, M. S.; Hillemann, M.; Reydel, N.; Hinz, S.; Jutzi, B.

2017-08-01

In this paper, we focus on UAV-borne laser scanning with the objective of densely sampling object surfaces in the local surrounding of the UAV. In this regard, using a line scanner which scans along the vertical direction and perpendicular to the flight direction results in a point cloud with low point density if the UAV moves fast. Using a line scanner which scans along the horizontal direction only delivers data corresponding to the altitude of the UAV and thus a low scene coverage. For these reasons, we present a concept and a system for UAV-borne laser scanning using multiple line scanners. Our system consists of a quadcopter equipped with horizontally and vertically oriented line scanners. We demonstrate the capabilities of our system by presenting first results obtained for a flight within an outdoor scene. Thereby, we use a downsampling of the original point cloud and different neighborhood types to extract fundamental geometric features which in turn can be used for scene interpretation with respect to linear, planar or volumetric structures.

Perception Of "Features" And "Objects": Applications To The Design Of Instrument Panel Displays

Science.gov (United States)

Poynter, Douglas; Czarnomski, Alan J.

1988-10-01

An experiment was conducted to determine whether socalled feature displays allow for faster and more accurate processing compared to object displays. Previous psychological studies indicate that features can be processed in parallel across the visual field, whereas objects must be processed one at a time with the aid of attentional focus. Numbers and letters are examples of objects; line orientation and color are examples of features. In this experiment, subjects were asked to search displays composed of up to 16 elements for the presence of specific elements. The ability to detect, localize, and identify targets was influenced by display format. Digital errors increased with the number of elements, the number of targets, and the distance of the target from the fixation point. Line orientation errors increased only with the number of targets. Several other display types were evaluated, and each produced a pattern of errors similar to either digital or line orientation format. Results of the study were discussed in terms of Feature Integration Theory, which distinguishes between elements that are processed with parallel versus serial mechanisms.

Large sexual-orientation-related differences in performance on mental rotation and judgment of line orientation tasks.

Science.gov (United States)

Rahman, Qazi; Wilson, Glenn D

2003-01-01

This study examined the performance of heterosexual and homosexual men and women on 2 tests of spatial processing, mental rotation (MR) and Benton Judgment of Line Orientation (JLO). The sample comprised 60 heterosexual men, 60 heterosexual women, 60 homosexual men, and 60 homosexual women. There were significant main effects of gender (men achieving higher scores overall) and Gender x Sexual Orientation interactions. Decomposing these interactions revealed large differences between the male groups in favor of heterosexual men on JLO and MR performance. There was a modest difference between the female groups on MR total correct scores in favor of homosexual women but no differences in MR percentage correct. The evidence suggests possible variations in the parietal cortex between homosexual and heterosexual persons.

Cyclic Solvent Vapor Annealing for Rapid, Robust Vertical Orientation of Features in BCP Thin Films

Science.gov (United States)

Paradiso, Sean; Delaney, Kris; Fredrickson, Glenn

2015-03-01

Methods for reliably controlling block copolymer self assembly have seen much attention over the past decade as new applications for nanostructured thin films emerge in the fields of nanopatterning and lithography. While solvent assisted annealing techniques are established as flexible and simple methods for achieving long range order, solvent annealing alone exhibits a very weak thermodynamic driving force for vertically orienting domains with respect to the free surface. To address the desire for oriented features, we have investigated a cyclic solvent vapor annealing (CSVA) approach that combines the mobility benefits of solvent annealing with selective stress experienced by structures oriented parallel to the free surface as the film is repeatedly swollen with solvent and dried. Using dynamical self-consistent field theory (DSCFT) calculations, we establish the conditions under which the method significantly outperforms both static and cyclic thermal annealing and implicate the orientation selection as a consequence of the swelling/deswelling process. Our results suggest that CSVA may prove to be a potent method for the rapid formation of highly ordered, vertically oriented features in block copolymer thin films.

Product line design

Czech Academy of Sciences Publication Activity Database

Anderson, S. P.; Celik, Levent

2015-01-01

Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

Service oriented architecture for scientific analysis at W7-X. An example of a field line tracer

Energy Technology Data Exchange (ETDEWEB)

Bozhenkov, S.A., E-mail: boz@ipp.mpg.de; Geiger, J.; Grahl, M.; Kißlinger, J.; Werner, A.; Wolf, R.C.

2013-11-15

Highlights: • We briefly overview available web-service protocols, and explain why SOAP standards are chosen. • We explain the basics of the SOAP technology and give both the usage and development patterns with corresponding examples. • We develop a new W7-X field line tracing service. • The service can calculate Poincaré maps, connection lengths, magnetic coordinates, heat fluxes, etc. with a realistic device geometry. • With the tracer service, we model the influence of 1/1 error field on the W7-X divertor heat loads. -- Abstract: Service oriented architecture based on web-services is a universal method of combining software components. SOAP web-services chosen for W7-X are characterized by strong standards and readily available tools. In this paper the SOAP technology is explained and is illustrated with a new service for field line tracing. The field line tracing package consists of a C++ library and a web-service interface. It features a flexible structure and can handle a realistic machine geometry. The following problems can be solved: getting a field line; making Poincaré maps; calculating flux surface characteristics; calculating heat fluxes to the wall; constructing magnetic coordinates, etc. The service is applied to estimate W7-X divertor loads with an 1/1 error field.

Service oriented architecture for scientific analysis at W7-X. An example of a field line tracer

International Nuclear Information System (INIS)

Bozhenkov, S.A.; Geiger, J.; Grahl, M.; Kißlinger, J.; Werner, A.; Wolf, R.C.

2013-01-01

Highlights: • We briefly overview available web-service protocols, and explain why SOAP standards are chosen. • We explain the basics of the SOAP technology and give both the usage and development patterns with corresponding examples. • We develop a new W7-X field line tracing service. • The service can calculate Poincaré maps, connection lengths, magnetic coordinates, heat fluxes, etc. with a realistic device geometry. • With the tracer service, we model the influence of 1/1 error field on the W7-X divertor heat loads. -- Abstract: Service oriented architecture based on web-services is a universal method of combining software components. SOAP web-services chosen for W7-X are characterized by strong standards and readily available tools. In this paper the SOAP technology is explained and is illustrated with a new service for field line tracing. The field line tracing package consists of a C++ library and a web-service interface. It features a flexible structure and can handle a realistic machine geometry. The following problems can be solved: getting a field line; making Poincaré maps; calculating flux surface characteristics; calculating heat fluxes to the wall; constructing magnetic coordinates, etc. The service is applied to estimate W7-X divertor loads with an 1/1 error field

Applying TPM on Production Line of Huanwei

Directory of Open Access Journals (Sweden)

Zhai Yunkai

2017-01-01

The study based on the study and analysis of the TPM theory, based on my practice in the SMT2 production line of Victoria Electronics of Huanwei. Then it studied the promotion and implementation steps of TPM on SMT2 line. And it also introduced the improvement instance of SMT2 line. By contrasting the utilization of equipment on SMT2 line before and after the comprehensive of TPM, the necessity of implementing TPM is derived. For how to apply TPM on the production lines, and how to improve equipment comprehensive utilization, finish the order on time, provide high quality products to our customers, these are the main part of production line equipment management work. This article provides the reference for how to promote TPM on other production lines.

A single theoretical framework for circular features processing in humans: orientation and direction of motion compared

Directory of Open Access Journals (Sweden)

Tzvetomir eTzvetanov

2012-05-01

Full Text Available Common computational principles underly processing of various visual features in the cortex. They are considered to create similar patterns of contextual modulations in behavioral studies for different features as orientation and direction of motion. Here, I studied the possibility that a single theoretical framework, implemented in different visual areas, of circular feature coding and processing could explain these similarities in observations. Stimuli were created that allowed direct comparison of the contextual effects on orientation and motion direction with two different psychophysical probes: changes in weak and strong signal perception. One unique simplified theoretical model of circular feature coding including only inhibitory interactions, and decoding through standard vector average, successfully predicted the similarities in the two domains, while different feature population characteristics explained well the differences in modulation on both experimental probes. These results demonstrate how a single computational principle underlies processing of various features across the cortices.

A product feature-based user-centric product search model

OpenAIRE

Ben Jabeur, Lamjed; Soulier, Laure; Tamine, Lynda; Mousset, Paul

2016-01-01

During the online shopping process, users would search for interesting products and quickly access those that fit with their needs among a long tail of similar or closely related products. Our contribution addresses head queries that are frequently submitted on e-commerce Web sites. Head queries usually target featured products with several variations, accessories, and complementary products. We present in this paper a product feature-based user-centric model for product search involving in a...

POINT CLOUD ANALYSIS FOR UAV-BORNE LASER SCANNING WITH HORIZONTALLY AND VERTICALLY ORIENTED LINE SCANNERS – CONCEPT AND FIRST RESULTS

Directory of Open Access Journals (Sweden)

M. Weinmann

2017-08-01

Full Text Available In this paper, we focus on UAV-borne laser scanning with the objective of densely sampling object surfaces in the local surrounding of the UAV. In this regard, using a line scanner which scans along the vertical direction and perpendicular to the flight direction results in a point cloud with low point density if the UAV moves fast. Using a line scanner which scans along the horizontal direction only delivers data corresponding to the altitude of the UAV and thus a low scene coverage. For these reasons, we present a concept and a system for UAV-borne laser scanning using multiple line scanners. Our system consists of a quadcopter equipped with horizontally and vertically oriented line scanners. We demonstrate the capabilities of our system by presenting first results obtained for a flight within an outdoor scene. Thereby, we use a downsampling of the original point cloud and different neighborhood types to extract fundamental geometric features which in turn can be used for scene interpretation with respect to linear, planar or volumetric structures.

Service-oriented product development strategies

DEFF Research Database (Denmark)

Tan, Adrian Ronald

Manufacturing companies have traditionally focused their efforts on designing, developing and producing physical products for the market. Today, global competition, outsourcing and legislation commend that companies take greater responsibility of their products. This is driving some manufacturers...... to shift their business strategies from selling products (e.g. photocopying machines) to the provision of services (e.g. document services). Instead of the product itself, the activity and knowledge associated with the use of the product is perceived to be of more value to customers. In the research...... community, service-oriented approaches that embrace this change of business focus from individual products to total integrated customer solutions are termed Product/Service-Systems (PSS). The research in this thesis addresses the systematic design and development of PSS solutions in manufacturing firms...

Coherence in product-oriented policies and environmental management systems in the car industry

DEFF Research Database (Denmark)

Smink, Carla Kornelia; Nielsen, Eskild Holm

more traditional process-oriented policies and are a challenge for companies. The article presents some of the authors  investigations on how the car industry has dealt with both process-oriented and product-oriented policies. [1] EPR refers to extending producer responsibility for products beyond......Over the last decade, product-oriented policies as Extended Producer Responsibility (EPR) and Integrated Product Policy (IPP) are more and more recognised as a target for both corporate environmental strategy and government environmental policy. These product-oriented policies are distinct from...

The series production in a standardized fabrication line for silicide fuels and commercial aspects

International Nuclear Information System (INIS)

Wehner, E.L.; Hassel, H.W.

1987-01-01

NUKEM has been responsible for the development and fabrication of LEU fuel elements for MTR reactors under the frame of the German AF program since 1979. The AF program is part of the international RERTR efforts, which were initiated by the INFCE Group in 1978. This paper describes the actual status of development and the transition from the prototype to the series production in a standardized manufacturing line for silicide fuels at NUKEM. Technical provisions and a customer oriented standardized product range aim at an economized manufacturing. (Author)

First on-line $\\beta$-NMR on oriented nuclei magnetic dipole moments of the $\

CERN Document Server

Giles, T; Stone, N J; Van Esbroeck, K; White, G; Wöhr, A; Veskovic, M; Towner, I S; Mantica, P F; Prisciandaro, J I; Morrissey, D J; Fedosseev, V; Mishin, V I; Köster, U; Walters, W B

2000-01-01

The first fully on-line use of the angular distribution of $\\beta$ - emission in detection of NMR of nuclei oriented at low temperatures is reported. The magnetic moments of the single valence particle, intermediate mass, isotopes $^{67}$Ni($\

Product Line Rivalry with Brand Differentiation

OpenAIRE

Gilbert, Richard J.; Matutes, Carmen

1989-01-01

Competition with product rivalry is examined in a model where products are differentiated by both quality and brand name. With no commitment, firms produce a full product line. When firms can commit to restrict their product offerings, firms specialize if the degree of brand-specific differentiation is small and they produce a full product line if brand-specific differentiation is large relative to intrafirm differentiation. Firms may crowd a product space when all competitors would be better...

Measuring the light scattering and orientation of a spheroidal particle using in-line holography.

Science.gov (United States)

Seo, Kyung Won; Byeon, Hyeok Jun; Lee, Sang Joon

2014-07-01

The light scattering properties of a horizontally and vertically oriented spheroidal particle under laser illumination are experimentally investigated using digital in-line holography. The reconstructed wave field shows the bright singular points as a result of the condensed beam formed by a transparent spheroidal particle acting as a lens. The in-plane (θ) and out-of-plane (ϕ) rotating angles of an arbitrarily oriented spheroidal particle are measured by using these scattering properties. As a feasibility test, the 3D orientation of a transparent spheroidal particle suspended in a microscale pipe flow is successfully reconstructed by adapting the proposed method.

Judgment of Line Orientation Depends on Gender, Education, and Type of Error

Science.gov (United States)

Caparelli-Daquer, Egas M.; Oliveira-Souza, Ricardo; Filho, Pedro F. Moreira

2009-01-01

Visuospatial tasks are particularly proficient at eliciting gender differences during neuropsychological performance. Here we tested the hypothesis that gender and education are related to different types of visuospatial errors on a task of line orientation that allowed the independent scoring of correct responses ("hits", or H) and one type of…

Including product features in process redesign

DEFF Research Database (Denmark)

Hvam, Lars; Hauksdóttir, Dagný; Mortensen, Niels Henrik

2017-01-01

do not take into account how the product features are applied throughout the process, which makes it difficult to obtain a comprehensive understanding of the activities in the processes and to generate significant improvements. The suggested approach models the product family using the so......This article suggests a visual modelling method for integrating models of product features with business process models for redesigning the business processes involving specifications of customer-tailored products and services. The current methods for redesigning these types of business processes......-called product variant master and the business process modelling notation for modelling the process flow. The product model is combined with the process map by identifying features used in each step of the process flow. Additionally, based on the information absorbed from the integrated model, the value stream...

Real-time line-width measurements: a new feature for reticle inspection systems

Science.gov (United States)

Eran, Yair; Greenberg, Gad; Joseph, Amnon; Lustig, Cornel; Mizrahi, Eyal

1997-07-01

The significance of line width control in mask production has become greater with the lessening of defect size. There are two conventional methods used for controlling line widths dimensions which employed in the manufacturing of masks for sub micron devices. These two methods are the critical dimensions (CD) measurement and the detection of edge defects. Achieving reliable and accurate control of line width errors is one of the most challenging tasks in mask production. Neither of the two methods cited above (namely CD measurement and the detection of edge defects) guarantees the detection of line width errors with good sensitivity over the whole mask area. This stems from the fact that CD measurement provides only statistical data on the mask features whereas applying edge defect detection method checks defects on each edge by itself, and does not supply information on the combined result of error detection on two adjacent edges. For example, a combination of a small edge defect together with a CD non- uniformity which are both within the allowed tolerance, may yield a significant line width error, which will not be detected using the conventional methods (see figure 1). A new approach for the detection of line width errors which overcomes this difficulty is presented. Based on this approach, a new sensitive line width error detector was developed and added to Orbot's RT-8000 die-to-database reticle inspection system. This innovative detector operates continuously during the mask inspection process and scans (inspects) the entire area of the reticle for line width errors. The detection is based on a comparison of measured line width that are taken on both the design database and the scanned image of the reticle. In section 2, the motivation for developing this new detector is presented. The section covers an analysis of various defect types, which are difficult to detect using conventional edge detection methods or, alternatively, CD measurements. In section 3

Grain orientation mapping of passivated aluminum interconnect lines with X-ray micro-diffraction

International Nuclear Information System (INIS)

Chang, C.H.; Patel, J.R.; MacDowell, A.A.; Padmore, H.A.; Thompson, A.C.

1998-01-01

A micro x-ray diffraction facility is under development at the Advanced Light Source. Spot sizes are typically about 1-microm size generated by means of grazing incidence Kirkpatrick-Baez focusing mirrors. Photon energy is either white of energy range 6--14 keV or monochromatic generated from a pair of channel cut crystals. Laue diffraction pattern from a single grain in a passivated 2-microm wide bamboo structured Aluminum interconnect line has been recorded. Acquisition times are of the order of seconds. The Laue pattern has allowed the determination of the crystallographic orientation of individual grains along the line length. The experimental and analysis procedure used is described, as is the latest grain orientation result. The impact of x-ray micro-diffraction and its possible future direction are discussed in the context of other developments in the area of electromigration, and other technological problems

Grain orientation mapping of passivated aluminum interconnect lines by x-ray micro-diffraction

International Nuclear Information System (INIS)

Chang, C. H.; Patel, J. R.; MacDowell, A. A.; Padmore, H. A.; Thompson, A. C.

1998-01-01

A micro x-ray diffraction facility is under development at the Advanced Light Source. Spot sizes are typically about 1-μm size generated by means of grazing incidence Kirkpatrick-Baez focusing mirrors. Photon energy is either white of energy range 6-14 keV or monochromatic generated from a pair of channel cut crystals. Laue diffraction pattern from a single grain in a passivated 2-μm wide bamboo structured Aluminum interconnect line has been recorded. Acquisition times are of the order of seconds. The Laue pattern has allowed the determination of the crystallographic orientation of individual grains along the line length. The experimental and analysis procedure used is described, as is the latest grain orientation result. The impact of x-ray micro-diffraction and its possible future direction are discussed in the context of other developments in the area of electromigration, and other technological problems

Market-Oriented Product Innovation in Small Firms

NARCIS (Netherlands)

Verhees, F.J.H.M.

2005-01-01

Description: This thesis deals with product-innovation in small firms. It aims at a better understanding of the determinants of product innovation in small firms, particularly those determinants that are related to the market orientation of small firms. The focus of the study is on small firms that

Library orientation on videotape: production planning and administrative support.

Science.gov (United States)

Shedlock, J; Tawyea, E W

1989-01-01

New student-faculty-staff orientation is an important public service in a medical library and demands creativity, imagination, teaching skill, coordination, and cooperation on the part of public services staff. The Northwestern University Medical Library (NUML) implemented a video production service in the spring of 1986 and used the new service to produce an orientation videotape for incoming students, new faculty, and medical center staff. Planning is an important function in video production, and the various phases of outlining topics, drafting scripts, matching video sequences, and actual taping of video, voice, and music are described. The NUML orientation videotape demonstrates how reference and audiovisual services merge talent and skills to benefit the library user. Videotape production, however, cannot happen in a vacuum of good intentions and high ideals. This paper also presents the management support and cost analysis needed to make video production services a reality for use by public service departments.

Feature-opinion pair identification of product reviews in Chinese: a domain ontology modeling method

Science.gov (United States)

Yin, Pei; Wang, Hongwei; Guo, Kaiqiang

2013-03-01

With the emergence of the new economy based on social media, a great amount of consumer feedback on particular products are conveyed through wide-spreading product online reviews, making opinion mining a growing interest for both academia and industry. According to the characteristic mode of expression in Chinese, this research proposes an ontology-based linguistic model to identify the basic appraisal expression in Chinese product reviews-"feature-opinion pair (FOP)." The product-oriented domain ontology is constructed automatically at first, then algorithms to identify FOP are designed by mapping product features and opinions to the conceptual space of the domain ontology, and finally comparative experiments are conducted to evaluate the model. Experimental results indicate that the performance of the proposed approach in this paper is efficient in obtaining a more accurate result compared to the state-of-art algorithms. Furthermore, through identifying and analyzing FOPs, the unstructured product reviews are converted into structured and machine-sensible expression, which provides valuable information for business application. This paper contributes to the related research in opinion mining by developing a solid foundation for further sentiment analysis at a fine-grained level and proposing a general way for automatic ontology construction.

BLM Colorado Wild and Scenic Rivers Line Features (Suitable/Eligible)

Data.gov (United States)

Department of the Interior — KMZ File Format –- This line feature class represents the segments identified as eligible or suitable for Wild and Scenic River designation. These segments are part...

Optimization of line configuration and balancing for flexible machining lines

Science.gov (United States)

Liu, Xuemei; Li, Aiping; Chen, Zurui

2016-05-01

Line configuration and balancing is to select the type of line and allot a given set of operations as well as machines to a sequence of workstations to realize high-efficiency production. Most of the current researches for machining line configuration and balancing problems are related to dedicated transfer lines with dedicated machine workstations. With growing trends towards great product variety and fluctuations in market demand, dedicated transfer lines are being replaced with flexible machining line composed of identical CNC machines. This paper deals with the line configuration and balancing problem for flexible machining lines. The objective is to assign operations to workstations and find the sequence of execution, specify the number of machines in each workstation while minimizing the line cycle time and total number of machines. This problem is subject to precedence, clustering, accessibility and capacity constraints among the features, operations, setups and workstations. The mathematical model and heuristic algorithm based on feature group strategy and polychromatic sets theory are presented to find an optimal solution. The feature group strategy and polychromatic sets theory are used to establish constraint model. A heuristic operations sequencing and assignment algorithm is given. An industrial case study is carried out, and multiple optimal solutions in different line configurations are obtained. The case studying results show that the solutions with shorter cycle time and higher line balancing rate demonstrate the feasibility and effectiveness of the proposed algorithm. This research proposes a heuristic line configuration and balancing algorithm based on feature group strategy and polychromatic sets theory which is able to provide better solutions while achieving an improvement in computing time.

Product-oriented environmental management. A study of capability building, stakeholder orientation and continuous improvement regarding products' environmental characteristics in firms

NARCIS (Netherlands)

de Bakker, F.G.A.

2001-01-01

Companies are increasingly giving attention to the environmental characteristics of their products. This book focuses on the ways in which large, proactive, firms could develop and maintain product-oriented environmental management (POEM), both at the strategic and the operational level. POEM is

License plate localization in complex scenes based on oriented FAST and rotated BRIEF feature

Science.gov (United States)

Wang, Ran; Xia, Yuanchun; Wang, Guoyou; Tian, Jiangmin

2015-09-01

Within intelligent transportation systems, fast and robust license plate localization (LPL) in complex scenes is still a challenging task. Real-world scenes introduce complexities such as variation in license plate size and orientation, uneven illumination, background clutter, and nonplate objects. These complexities lead to poor performance using traditional LPL features, such as color, edge, and texture. Recently, state-of-the-art performance in LPL has been achieved by applying the scale invariant feature transform (SIFT) descriptor to LPL for visual matching. However, for applications that require fast processing, such as mobile phones, SIFT does not meet the efficiency requirement due to its relatively slow computational speed. To address this problem, a new approach for LPL, which uses the oriented FAST and rotated BRIEF (ORB) feature detector, is proposed. The feature extraction in ORB is much more efficient than in SIFT and is invariant to scale and grayscale as well as rotation changes, and hence is able to provide superior performance for LPL. The potential regions of a license plate are detected by considering spatial and color information simultaneously, which is different from previous approaches. The experimental results on a challenging dataset demonstrate the effectiveness and efficiency of the proposed method.

Photogrammetric Resection Approach Using Straight Line Features for Estimation of Cartosat-1 Platform Parameters

Directory of Open Access Journals (Sweden)

Nita H. Shah

2008-08-01

Full Text Available The classical calibration or space resection is the fundamental task in photogrammetry. The lack of sufficient knowledge of interior and exterior orientation parameters lead to unreliable results in the photogrammetric process. There are several other available methods using lines, which consider the determination of exterior orientation parameters, with no mention to the simultaneous determination of inner orientation parameters. Normal space resection methods solve the problem using control points, whose coordinates are known both in image and object reference systems. The non-linearity of the model and the problems, in point location in digital images are the main drawbacks of the classical approaches. The line based approach to overcome these problems includes usage of lines in the number of observations that can be provided, which improve significantly the overall system redundancy. This paper addresses mathematical model relating to both image and object reference system for solving the space resection problem which is generally used for upgrading the exterior orientation parameters. In order to solve the dynamic camera calibration parameters, a sequential estimator (Kalman Filtering is applied; in an iterative process to the image. For dynamic case, e.g. an image sequence of moving objects, a state prediction and a covariance matrix for the next instant is obtained using the available estimates and the system model. Filtered state estimates can be computed from these predicted estimates using the Kalman Filtering approach and basic physical sensor model for each instant of time. The proposed approach is tested with three real data sets and the result suggests that highly accurate space resection parameters can be obtained with or without using the control points and progressive processing time reduction.

Rotation-invariant features for multi-oriented text detection in natural images.

Directory of Open Access Journals (Sweden)

Cong Yao

Full Text Available Texts in natural scenes carry rich semantic information, which can be used to assist a wide range of applications, such as object recognition, image/video retrieval, mapping/navigation, and human computer interaction. However, most existing systems are designed to detect and recognize horizontal (or near-horizontal texts. Due to the increasing popularity of mobile-computing devices and applications, detecting texts of varying orientations from natural images under less controlled conditions has become an important but challenging task. In this paper, we propose a new algorithm to detect texts of varying orientations. Our algorithm is based on a two-level classification scheme and two sets of features specially designed for capturing the intrinsic characteristics of texts. To better evaluate the proposed method and compare it with the competing algorithms, we generate a comprehensive dataset with various types of texts in diverse real-world scenes. We also propose a new evaluation protocol, which is more suitable for benchmarking algorithms for detecting texts in varying orientations. Experiments on benchmark datasets demonstrate that our system compares favorably with the state-of-the-art algorithms when handling horizontal texts and achieves significantly enhanced performance on variant texts in complex natural scenes.

The impact of signal normalization on seizure detection using line length features.

Science.gov (United States)

Logesparan, Lojini; Rodriguez-Villegas, Esther; Casson, Alexander J

2015-10-01

Accurate automated seizure detection remains a desirable but elusive target for many neural monitoring systems. While much attention has been given to the different feature extractions that can be used to highlight seizure activity in the EEG, very little formal attention has been given to the normalization that these features are routinely paired with. This normalization is essential in patient-independent algorithms to correct for broad-level differences in the EEG amplitude between people, and in patient-dependent algorithms to correct for amplitude variations over time. It is crucial, however, that the normalization used does not have a detrimental effect on the seizure detection process. This paper presents the first formal investigation into the impact of signal normalization techniques on seizure discrimination performance when using the line length feature to emphasize seizure activity. Comparing five normalization methods, based upon the mean, median, standard deviation, signal peak and signal range, we demonstrate differences in seizure detection accuracy (assessed as the area under a sensitivity-specificity ROC curve) of up to 52 %. This is despite the same analysis feature being used in all cases. Further, changes in performance of up to 22 % are present depending on whether the normalization is applied to the raw EEG itself or directly to the line length feature. Our results highlight the median decaying memory as the best current approach for providing normalization when using line length features, and they quantify the under-appreciated challenge of providing signal normalization that does not impair seizure detection algorithm performance.

PENENTUAN FITUR WEBSITE BIDANG PARIWISATA DAN KEBUDAYAAN DENGAN METODE FEATURE-ORIENTED DOMAIN ANALYSIS (FODA

Directory of Open Access Journals (Sweden)

Muhammad Iqbal

2016-10-01

Penentuan fitur dalam membuat website bidang pariwisata dan kebudayaan dibutuhkan untuk mengetahui fitur yang bisa diimplementasikan. Untuk membantu menentukan fitur tersebut, digunakan analisis domain dengan metode Feature-Oriented Domain Analysis (FODA. Metode tersebut mempunyai tahapan dimulai dari tinjauan aplikasi terhadap ketiga website sebagai sampel untuk mengambil fitur. Selanjutnya tahapan analisis konteks yang mendapatkan diagram struktur dan diagram konteks. Berikutnya tahapan pemodelan domain yang dibagi dua langkah yaitu analisis fitur untuk mendapatkan fitur-fitur pada aplikasi web melalui diagram fitur dengan penjelasan melalui kamus terminologi domain. Langkah berikutnya adalah pemodelan entity-relationship dengan membuat diagram entity-relationship untuk pembuatan database. Terakhir, pemodelan arsitektur dengan membuat arsitektur domain untuk pengembangan aplikasi yang hanya fokus pada fitur.  Hasil dari analisis fitur adalah didapatkan sebanyak 38 fitur mandatory yang berarti fitur tersebut wajib diimplementasikan dalam aplikasi web untuk pariwisata dan kebudayaan.  Kata kunci: Pariwisata, Kebudayaan, Website, Fitur, Feature-Oriented Domain Analysis

Micro-Injection Moulding In-Line Quality Assurance Based on Product and Process Fingerprints

DEFF Research Database (Denmark)

Baruffi, Federico; Calaon, Matteo; Tosello, Guido

2018-01-01

significant dimensional features of the micro part were measured using a focus variation microscope. Their dependency on the variation of µIM process parameters was studied with a Design of Experiments (DoE) statistical approach. A correlation study allowed the identification of the product fingerprint, i...... of the study showed that the dimensional quality of the micro component could be effectively controlled in-line by combining the two fingerprints, thus opening the door for future µIM in-line process optimization and quality assessment.......Micro-injection moulding (μIM) is a replication-based process enabling the cost-effective production of complex and net-shaped miniaturized plastic components. The micro-scaled size of such parts poses great challenges in assessing their dimensional quality and often leads to time...

Service-oriented workflow to efficiently and automatically fulfill products in a highly individualized web and mobile environment

Science.gov (United States)

Qiao, Mu

2015-03-01

Service Oriented Architecture1 (SOA) is widely used in building flexible and scalable web sites and services. In most of the web or mobile photo book and gifting business space, the products ordered are highly variable without a standard template that one can substitute texts or images from similar to that of commercial variable data printing. In this paper, the author describes a SOA workflow in a multi-sites, multi-product lines fulfillment system where three major challenges are addressed: utilization of hardware and equipment, highly automation with fault recovery, and highly scalable and flexible with order volume fluctuation.

Effects of Crop Commercial Orientation on Productivity of ...

African Journals Online (AJOL)

orientation and crop productivity is assessed in a censored simultaneous ... employment have been working against increased productivity of the ... vulnerability to shocks, through asset accumulation (Hazell and Haddad, 2001). ... that moisture stress areas make more than 60 per cent of the land mass of the country.

Edge Detection and Feature Line Tracing in 3D-Point Clouds by Analyzing Geometric Properties of Neighborhoods

Directory of Open Access Journals (Sweden)

Huan Ni

2016-09-01

Full Text Available This paper presents an automated and effective method for detecting 3D edges and tracing feature lines from 3D-point clouds. This method is named Analysis of Geometric Properties of Neighborhoods (AGPN, and it includes two main steps: edge detection and feature line tracing. In the edge detection step, AGPN analyzes geometric properties of each query point’s neighborhood, and then combines RANdom SAmple Consensus (RANSAC and angular gap metric to detect edges. In the feature line tracing step, feature lines are traced by a hybrid method based on region growing and model fitting in the detected edges. Our approach is experimentally validated on complex man-made objects and large-scale urban scenes with millions of points. Comparative studies with state-of-the-art methods demonstrate that our method obtains a promising, reliable, and high performance in detecting edges and tracing feature lines in 3D-point clouds. Moreover, AGPN is insensitive to the point density of the input data.

Lightweight, Low-CTE Tubes Made From Biaxially Oriented LCPs

Science.gov (United States)

Rubin, Leslie; Federico, Frank; Formato, Richard; Larouco, John; Slager, William

2004-01-01

Tubes made from biaxially oriented liquid-crystal polymers (LCPs) have been developed for use as penetrations on cryogenic tanks. ( Penetrations in this context denotes feed lines, vent lines, and sensor tubes, all of which contribute to the undesired conduction of heat into the tanks.) In comparison with corresponding prior cryogenic-tank penetrations made from stainless steels and nickel alloys, the LCP penetrations offer advantages of less weight and less thermal conduction. An additional major advantage of LCP components is that one can tailor their coefficients of thermal expansion (CTEs). The estimated cost of continuous production of LCP tubes of typical sizes is about $1.27/ft ($4.17/m) [based on 1998 prices]. LCP tubes that are compatible with liquid oxygen and that feature tailored biaxial molecular orientation and quasi-isotropic properties (including quasi-isotropic CTE) have been fabricated by a combination of proprietary and patented techniques that involve the use of counterrotating dies (CRDs). Tailoring of the angle of molecular orientation is what makes it possible to tailor the CTE over a wide range to match the CTEs of adjacent penetrations of other tank components; this, in turn, makes it possible to minimize differential-thermal expansion stresses that arise during thermal cycling. The fabrication of biaxially oriented LCP tubes by use of CRDs is not new in itself. The novelty of the present development lies in tailoring the orientations and thus the CTEs and other mechanical properties of the LCPs for the intended cryogenic applications and in modifications of the CRDs for this purpose. The LCP tubes and the 304-stainless-steel tubes that the LCP tubes were intended to supplant were tested with respect to burst strength, permeability, thermal conductivity, and CTE.

Application of object oriented techniques in the TRIUMF beam line 2C control system

International Nuclear Information System (INIS)

Wilkinson, N.A.; Ludgate, G.A.

1992-07-01

The KAON Factory central control system study employed a uniform approach to requirements analysis, architectural design and programming based on well established object oriented principles. These principles were applied to the successful analysis, design and implementation of the control system for the TRIUMF Beam Line 2C Solid Target Facility. The specification for this control system was created in collaboration with Beam Line 2C equipment management experts and, once the analysis models were validated, an approach was developed for the direct translation of these models into C code. A commercial real time database was central to this translation, as inter-object data and control flows are implemented by channels in the database. This paper focuses on the experience gained in the use of object oriented techniques during the complete analysis-design-implementation cycle of a working control system and on the utility of implementing such a system using a commercial real time database and graphical interface. (author)

SAR Data Fusion Imaging Method Oriented to Target Feature Extraction

Directory of Open Access Journals (Sweden)

Yang Wei

2015-02-01

Full Text Available To deal with the difficulty for target outlines extracting precisely due to neglect of target scattering characteristic variation during the processing of high-resolution space-borne SAR data, a novel fusion imaging method is proposed oriented to target feature extraction. Firstly, several important aspects that affect target feature extraction and SAR image quality are analyzed, including curved orbit, stop-and-go approximation, atmospheric delay, and high-order residual phase error. Furthermore, the corresponding compensation methods are addressed as well. Based on the analysis, the mathematical model of SAR echo combined with target space-time spectrum is established for explaining the space-time-frequency change rule of target scattering characteristic. Moreover, a fusion imaging strategy and method under high-resolution and ultra-large observation angle range conditions are put forward to improve SAR quality by fusion processing in range-doppler and image domain. Finally, simulations based on typical military targets are used to verify the effectiveness of the fusion imaging method.

Service-Oriented Factors Affecting the Adoption of Smartphones

Directory of Open Access Journals (Sweden)

Youngmo Kang

2014-06-01

Full Text Available This research investigates the adoption factors of smartphones focusing on the differences of smartphone and feature phone users. We used Technology Acceptance Model (TAM which incorporates service-oriented and device-oriented functional attributes as exogenous variables for a product-service system such as smartphones. In addition, Decision Tree (DT and customer surveys were conducted. As a study results, we found that the service-oriented functional attributes - ‘wireless internet’ and ‘mobile applications’ - affect the adoption of smartphones regardless of users. However, the DT results revealed that the more important factor is 'mobile applications' to smartphone users but 'wireless internet' for feature phone users. In conclusion, we discovered that a strategy emphasis on the service-oriented attributes is needed for the adoption of smartphones.

Sustainable evolution of product line infrastructure code

OpenAIRE

Patzke, T.

2011-01-01

A major goal in many software development organizations today is to reduce development effort and cost, while improving their products' quality and diversity by developing reusable software. An organization takes advantage of its products' similarities, exploits what they have in common and manages what varies among them by building a product line infrastructure. A product line infrastructure is a reuse repository that contains exactly those common and variable artifacts, such as requirements...

Statistical Methods in Assembly Quality Management of Multi-Element Products on Automatic Rotor Lines

Science.gov (United States)

Pries, V. V.; Proskuriakov, N. E.

2018-04-01

To control the assembly quality of multi-element mass-produced products on automatic rotor lines, control methods with operational feedback are required. However, due to possible failures in the operation of the devices and systems of automatic rotor line, there is always a real probability of getting defective (incomplete) products into the output process stream. Therefore, a continuous sampling control of the products completeness, based on the use of statistical methods, remains an important element in managing the quality of assembly of multi-element mass products on automatic rotor lines. The feature of continuous sampling control of the multi-element products completeness in the assembly process is its breaking sort, which excludes the possibility of returning component parts after sampling control to the process stream and leads to a decrease in the actual productivity of the assembly equipment. Therefore, the use of statistical procedures for continuous sampling control of the multi-element products completeness when assembled on automatic rotor lines requires the use of such sampling plans that ensure a minimum size of control samples. Comparison of the values of the limit of the average output defect level for the continuous sampling plan (CSP) and for the automated continuous sampling plan (ACSP) shows the possibility of providing lower limit values for the average output defects level using the ACSP-1. Also, the average sample size when using the ACSP-1 plan is less than when using the CSP-1 plan. Thus, the application of statistical methods in the assembly quality management of multi-element products on automatic rotor lines, involving the use of proposed plans and methods for continuous selective control, will allow to automating sampling control procedures and the required level of quality of assembled products while minimizing sample size.

Marketing research: Pathway to optimal market oriented products ...

African Journals Online (AJOL)

This paper examines the role of marketing research as pathway to developing optimal market oriented products. The objectives of this paper among others are to (i) Establish whether the use of marketing research has effect on new product adoption process by consumers (ii) Find out if there is any relationship between the ...

Market Orientation, Innovativeness, Product Innovation, and Performance in Small Firms

NARCIS (Netherlands)

Verhees, F.J.H.M.; Meulenberg, M.T.G.

2004-01-01

Most research on market orientation, innovation and performance is related to big enterprises and small and medium-sized enterprises (SMEs). In this study a model is developed to investigate the combined effect of market orientation and innovativeness on product innovation and company performance,

Simple proteomics data analysis in the object-oriented PowerShell.

Science.gov (United States)

Mohammed, Yassene; Palmblad, Magnus

2013-01-01

Scripting languages such as Perl and Python are appreciated for solving simple, everyday tasks in bioinformatics. A more recent, object-oriented command shell and scripting language, Windows PowerShell, has many attractive features: an object-oriented interactive command line, fluent navigation and manipulation of XML files, ability to consume Web services from the command line, consistent syntax and grammar, rich regular expressions, and advanced output formatting. The key difference between classical command shells and scripting languages, such as bash, and object-oriented ones, such as PowerShell, is that in the latter the result of a command is a structured object with inherited properties and methods rather than a simple stream of characters. Conveniently, PowerShell is included in all new releases of Microsoft Windows and therefore already installed on most computers in classrooms and teaching labs. In this chapter we demonstrate how PowerShell in particular allows easy interaction with mass spectrometry data in XML formats, connection to Web services for tools such as BLAST, and presentation of results as formatted text or graphics. These features make PowerShell much more than "yet another scripting language."

A survey and comparison of heuristics for the 2D oriented on-line ...

African Journals Online (AJOL)

The two dimensional oriented on-line strip packing problem requires items to be packed, one at a time, into a strip of fixed width and infinite height so as to minimise the total height of the packing. The items may neither be rotated nor overlap. In this paper, ten heuristics from the literature are considered for the special case ...

A Sea-Sky Line Detection Method for Unmanned Surface Vehicles Based on Gradient Saliency.

Science.gov (United States)

Wang, Bo; Su, Yumin; Wan, Lei

2016-04-15

Special features in real marine environments such as cloud clutter, sea glint and weather conditions always result in various kinds of interference in optical images, which make it very difficult for unmanned surface vehicles (USVs) to detect the sea-sky line (SSL) accurately. To solve this problem a saliency-based SSL detection method is proposed. Through the computation of gradient saliency the line features of SSL are enhanced effectively, while other interference factors are relatively suppressed, and line support regions are obtained by a region growing method on gradient orientation. The SSL identification is achieved according to region contrast, line segment length and orientation features, and optimal state estimation of SSL detection is implemented by introducing a cubature Kalman filter (CKF). In the end, the proposed method is tested on a benchmark dataset from the "XL" USV in a real marine environment, and the experimental results demonstrate that the proposed method is significantly superior to other state-of-the-art methods in terms of accuracy rate and real-time performance, and its accuracy and stability are effectively improved by the CKF.

production lines

Directory of Open Access Journals (Sweden)

Jingshan Li

2000-01-01

Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

MEMORY OPERATION AND ATTENTION CONCENTRATION FEATURES OF BUILDING PROFESSIONALLY ORIENTED FOREIGN LANGUAGE COMMUNICATIVE STRATEGIES IN PERSPECTIVE PROGRAMMERS

Directory of Open Access Journals (Sweden)

Ірина Семеряк

2015-09-01

Full Text Available Memory operation and attention concentration features of building professionally oriented foreign language communicative strategies in perspective programmers have been analyzed in the article. The features of functioning and role of short-term, sensory, operational, long-term, semantic memory in the process of building foreign language professionally oriented communicative strategies in students majoring in programming have been in the spotlight of the author’s attention. Special conditions for successful memorizing of studying material by students have been identified. In the course of the pilot study it has been proven that active methods of teaching / learning enchance high concentration and makes it possible to activate long-term memory and, as a result, reflect necessary studying material in it. The impact of concentration on the efficiency of building professionally oriented foreign language communicative strategies in perspective programmers has been grounded. Mechanisms of concentration of students majoring in programming on studying activity have been analyzed.

Individual differences in using geometric and featural cues to maintain spatial orientation: cue quantity and cue ambiguity are more important than cue type.

Science.gov (United States)

Kelly, Jonathan W; McNamara, Timothy P; Bodenheimer, Bobby; Carr, Thomas H; Rieser, John J

2009-02-01

Two experiments explored the role of environmental cues in maintaining spatial orientation (sense of self-location and direction) during locomotion. Of particular interest was the importance of geometric cues (provided by environmental surfaces) and featural cues (nongeometric properties provided by striped walls) in maintaining spatial orientation. Participants performed a spatial updating task within virtual environments containing geometric or featural cues that were ambiguous or unambiguous indicators of self-location and direction. Cue type (geometric or featural) did not affect performance, but the number and ambiguity of environmental cues did. Gender differences, interpreted as a proxy for individual differences in spatial ability and/or experience, highlight the interaction between cue quantity and ambiguity. When environmental cues were ambiguous, men stayed oriented with either one or two cues, whereas women stayed oriented only with two. When environmental cues were unambiguous, women stayed oriented with one cue.

Oriented Edge-Based Feature Descriptor for Multi-Sensor Image Alignment and Enhancement

Directory of Open Access Journals (Sweden)

Myung-Ho Ju

2013-10-01

Full Text Available In this paper, we present an efficient image alignment and enhancement method for multi-sensor images. The shape of the object captured in a multi-sensor images can be determined by comparing variability of contrast using corresponding edges across multi-sensor image. Using this cue, we construct a robust feature descriptor based on the magnitudes of the oriented edges. Our proposed method enables fast image alignment by identifying matching features in multi-sensor images. We enhance the aligned multi-sensor images through the fusion of the salient regions from each image. The results of stitching the multi-sensor images and their enhancement demonstrate that our proposed method can align and enhance multi-sensor images more efficiently than previous methods.

Service orientation in holonic and multi agent manufacturing and robotics

CERN Document Server

Thomas, Andre; Trentesaux, Damien

2013-01-01

The book covers four research domains representing a trend for modern manufacturing control: Holonic and Multi-agent technologies for industrial systems; Intelligent Product and Product-driven Automation; Service Orientation of Enterprise’s strategic and technical processes; and Distributed Intelligent Automation Systems. These evolution lines have in common concepts related to service orientation derived from the Service Oriented Architecture (SOA) paradigm.     The service-oriented multi-agent systems approach discussed in the book is characterized by the use of a set of distributed autonomous and cooperative agents, embedded in smart components that use the SOA principles, being oriented by offer and request of services, in order to fulfil production systems and value chain goals.   A new integrated vision combining emergent technologies is offered, to create control structures with distributed intelligence supporting the vertical and horizontal enterprise integration and running in truly distributed ...

Comparison of Point and Line Features and Their Combination for Rigid Body Motion Estimation

DEFF Research Database (Denmark)

Pilz, Florian; Pugeault, Nicolas; Krüger, Norbert

2009-01-01

evaluate and compare the results using line and point features as 3D-2D constraints and we discuss the qualitative advantages and disadvantages of both feature types for RBM estimation. We also demonstrate an improvement in robustness through the combination of these features on large data sets...

Harnessing natural product assembly lines: structure, promiscuity, and engineering.

Science.gov (United States)

Ladner, Christopher C; Williams, Gavin J

2016-03-01

Many therapeutically relevant natural products are biosynthesized by the action of giant mega-enzyme assembly lines. By leveraging the specificity, promiscuity, and modularity of assembly lines, a variety of strategies has been developed that enables the biosynthesis of modified natural products. This review briefly summarizes recent structural advances related to natural product assembly lines, discusses chemical approaches to probing assembly line structures in the absence of traditional biophysical data, and surveys efforts that harness the inherent or engineered promiscuity of assembly lines for the synthesis of non-natural polyketides and non-ribosomal peptide analogues.

Preparing for Automated Derivation of Products in a Software Product Line

National Research Council Canada - National Science Library

McGregor, John D

2005-01-01

... to bring a product to market, or through other production improvements. Business goals such as these make automated product derivation an appealing strategy to a software product line organization...

The role of value-informed pricing in market-oriented product innovation management

NARCIS (Netherlands)

Ingenbleek, P.; Frambach, R.T.; Verhallen, T.M.M.

2010-01-01

Although the positive effect of a market orientation on new product success is widely accepted and the market orientation literature has increased its understanding of how a market orientation leads to performance, the extant literature has overlooked the role of value-informed pricing in the

The Role of Value-Informed Pricing in Market-Oriented Product Innovation Management

NARCIS (Netherlands)

Ingenbleek, P.T.M.; Frambach, R.T.; Verhallen, Th.M.M.

2010-01-01

Although the positive effect of a market orientation on new product success is widely accepted and the market orientation literature has increased its understanding of how a market orientation leads to performance, the extant literature has overlooked the role of value-informed pricing in the

Hand proximity differentially affects visual working memory for color and orientation in a binding task.

Science.gov (United States)

Kelly, Shane P; Brockmole, James R

2014-01-01

Observers determined whether two sequentially presented arrays of six lines were the same or different. Differences, when present, involved either a swap in the color of two lines or a swap in the orientation of two lines. Thus, accurate change detection required the binding of color and orientation information for each line within visual working memory. Holding viewing distance constant, the proximity of the arrays to the hands was manipulated. Placing the hands near the to-be-remembered array decreased participants' ability to remember color information, but increased their ability to remember orientation information. This pair of results indicates that hand proximity differentially affects the processing of various types of visual information, a conclusion broadly consistent with functional and anatomical differences in the magnocellular and parvocellular pathways. It further indicates that hand proximity affects the likelihood that various object features will be encoded into integrated object files.

Hand Proximity Differentially Affects Visual Working Memory for Color and Orientation in a Binding Task

Directory of Open Access Journals (Sweden)

Shane P. Kelly

2014-04-01

Full Text Available Observers determined whether two sequentially presented arrays of six lines were the same or different. Differences, when present, involved either a swap in the color of two lines or a swap in the orientation of two lines. Thus, accurate change detection required the binding of color and orientation information for each line within visual working memory. Holding viewing distance constant, the proximity of the arrays to the hands was manipulated. Placing the hands near the to-be-remembered array decreased participants’ ability to remember color information, but increased their ability to remember orientation information. This pair of results indicates that hand proximity differentially affects the processing of various types of visual information, a conclusion broadly consistent with functional and anatomical differences in the magnocellular and parvocellular pathways. It further indicates that hand proximity affects the likelihood that various object features will be encoded into integrated object files.

Retail offer advantage through brand orientation in Luxury, high fashion stores

OpenAIRE

Grujic, Maja

2007-01-01

This thesis provides a conceptualisation of brand orientation within the context of fashion retailing, specially the luxury, or, so-called, high fashion retailing. Most of the high fashion sold today is ready to wear collections and diffusion lines, targeted to customers of particular class, age, income, social status, and with particular orientations to fashion. In plethora of offers, retailer need to work on a number of distinctive features that will make its store special, not only because...

Security Requirements Management in Software Product Line Engineering

Science.gov (United States)

Mellado, Daniel; Fernández-Medina, Eduardo; Piattini, Mario

Security requirements engineering is both a central task and a critical success factor in product line development due to the complexity and extensive nature of product lines. However, most of the current product line practices in requirements engineering do not adequately address security requirements engineering. Therefore, in this chapter we will propose a security requirements engineering process (SREPPLine) driven by security standards and based on a security requirements decision model along with a security variability model to manage the variability of the artefacts related to security requirements. The aim of this approach is to deal with security requirements from the early stages of the product line development in a systematic way, in order to facilitate conformance with the most relevant security standards with regard to the management of security requirements, such as ISO/IEC 27001 and ISO/IEC 15408.

Strategic production line synchronisation

Directory of Open Access Journals (Sweden)

Hattingh, Teresa

2016-08-01

Full Text Available A study was conducted at the sole global producer of suspension struts for a particular vehicle manufacturer. This supplier is currently able to meet customer demand. However, it does so because of a large finished goods and work-in-progress (WIP inventory. The plant operates two production processes that are separated by a large buffer of WIP, which essentially decouples the production processes. This study aimed to reduce this WIP buffer; this would require the processes to become synchronised, bearing in mind that the reliability of delivery should not decrease. A tool that considers time, quality, and machine capacity was developed to assess the impact of line synchronisation on company performance figures. It was found that line synchronisation produced several benefits for the supplier, including batch size reduction, lower inventory levels, and associated shorter lead times. This further allowed the supplier to improve flow in the plant by introducing a pull system. Improved visual oversight could lead to further improved problem-solving and innovation.

State of technology, system and solution supporting on-line maintenance - company's activities and products

International Nuclear Information System (INIS)

Nishitani, Junichi; Shimizu, Shunichi; Higasa, Hisakazu

2010-01-01

The new inspection system based on operator's maintenance and monitoring program of nuclear power plants was introduced in Japan more than one year ago and recommended on-line maintenance (maintenance during operation) will be carried out to increase capacity factor with safe and reliable operation of the plant. In this feature article, nine experts described the state of technology, system and solution supporting on-line maintenance - company's activities and products. These were titled as 'MHI's technology supporting on-line maintenance'. 'Technology supporting on-line maintenance - Toshiba's activities to upgrade monitoring and diagnostic service and maintenance management', 'AsahiKASEI's activities of on-line maintenance', 'Importance of information sharing of on-line maintenance and its ideal method-function of impact plan of IBM Maximo Asset Management for Nuclear', 'US's on-line maintenance and information systems', 'SmartProcedures realizing safe operation of nuclear power plant - proposal of computerized procedures', 'Ultrasonic leak detection system SDT170', 'Application of infrared thermography for equipment maintenance in nuclear power plant' and 'On-line condition monitoring system - condition eye'. (T. Tanaka)

Simulation Based Optimization for World Line Card Production System

Directory of Open Access Journals (Sweden)

Sinan APAK

2012-07-01

Full Text Available Simulation based decision support system is one of the commonly used tool to examine complex production systems. The simulation approach provides process modules which can be adjusted with certain parameters by using data relatively easily obtainable in production process. World Line Card production system simulation is developed to evaluate the optimality of existing production line via using discrete event simulation model with variaty of alternative proposals. The current production system is analysed by a simulation model emphasizing the bottlenecks and the poorly utilized production line. Our analysis identified some improvements and efficient solutions for the existing system.

Low-temperature nuclear orientation

International Nuclear Information System (INIS)

Stone, N.J.; Postma, H.

1986-01-01

This book comprehensively surveys the many aspects of the low temperature nuclear orientation method. The angular distribution of radioactive emissions from nuclei oriented by hyperfine interactions in solids, is treated experimentally and theoretically. A general introductory chapter is followed by formal development of the theory of the orientation process and the anisotropic emission of decay products from oriented nuclei, applied to radioactive decay and to reactions. Five chapters on applications to nuclear physics cover experimental studies of alpha, beta and gamma emission, nuclear moment measurement and level structure information. Nuclear orientation studies of parity non-conservation and time reversal asymmetry are fully described. Seven chapters cover aspects of hyperfine interactions, magnetic and electric, in metals, alloys and insulating crystals, including ordered systems. Relaxation phenomena and the combined technique of NMR detection using oriented nuclei are treated at length. Chapters on the major recent development of on-line facilities, giving access to short lived nuclei far from stability, on the use of nuclear orientation for thermometry below 1 Kelvin and on technical aspects of the method complete the main text. Extensive appendices, table of relevant parameters and over 1000 references are included to assist the design of future experiments. (Auth.)

Linear feature detection algorithm for astronomical surveys - I. Algorithm description

Science.gov (United States)

Bektešević, Dino; Vinković, Dejan

2017-11-01

Computer vision algorithms are powerful tools in astronomical image analyses, especially when automation of object detection and extraction is required. Modern object detection algorithms in astronomy are oriented towards detection of stars and galaxies, ignoring completely the detection of existing linear features. With the emergence of wide-field sky surveys, linear features attract scientific interest as possible trails of fast flybys of near-Earth asteroids and meteors. In this work, we describe a new linear feature detection algorithm designed specifically for implementation in big data astronomy. The algorithm combines a series of algorithmic steps that first remove other objects (stars and galaxies) from the image and then enhance the line to enable more efficient line detection with the Hough algorithm. The rate of false positives is greatly reduced thanks to a step that replaces possible line segments with rectangles and then compares lines fitted to the rectangles with the lines obtained directly from the image. The speed of the algorithm and its applicability in astronomical surveys are also discussed.

Developing Green Line Products

DEFF Research Database (Denmark)

Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

2011-01-01

This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

Strategy of Trade-Reliable Featured Product Supporting Regional Innovation Systems

Science.gov (United States)

Riskiawan, H. Y.; Purnomo, B. H.; Abdurahman, A.; Hariono, B.; Puspitasari, T. D.

2018-01-01

Pacitan, Ponorogo, and Magetan had planned the development of featured products as contained in the Medium Term Development Plan (MTDP) until 2020. The focus of development is almost similar to featured products derived from agribusiness, food processing, handycrafts, and tourism. The geographical proximity results characteristics of natural resources and social culture have similarities, including the type of featured products, constraints, problems, and opportunities for development. Given the characteristics and the support system of some featured products contained in these three regions have a lot in common and their functional interactions involving actors from across the region, it is necessary to develop cross-jurisdictional policy. The resulting strategy should be able to support the development of Regional Innovation System (RIS). The purpose of this research is 1) Determining featured product cross-regional between Pacitan regency; Ponorogo and Magetan districts in support of RIS development; and 2) Designing a featured product development strategy using supply chain management in order to drive the local economy. Based on the results of research conducted, featured products across the region that have potentiality to be developed are: processed products of “janggelan” leather products, and woven bamboo.

Graphical matching rules for cardinality based service feature diagrams

Directory of Open Access Journals (Sweden)

Faiza Kanwal

2017-03-01

Full Text Available To provide efficient services to end-users, variability and commonality among the features of the product line is a challenge for industrialist and researchers. Feature modeling provides great services to deal with variability and commonality among the features of product line. Cardinality based service feature diagrams changed the basic framework of service feature diagrams by putting constraints to them, which make service specifications more flexible, but apart from their variation in selection third party services may have to be customizable. Although to control variability, cardinality based service feature diagrams provide high level visual notations. For specifying variability, the use of cardinality based service feature diagrams raises the problem of matching a required feature diagram against the set of provided diagrams.

Nuclear orientation of on-line separated isotopes

International Nuclear Information System (INIS)

Vanneste, L.; Vandeplassche, D.; Walle, E. van; Geenen, J.; Nuytten, C.; Marshak, H.

1981-01-01

The purpose of nuclear orientation in the study of nuclei far from stability is explained. Various methods of nuclear orientation are compared. The Leuven setup and its initial performance are described. (orig.)

Surface inspection of flat products by means of texture analysis: on-line implementation using neural networks

Science.gov (United States)

Fernandez, Carlos; Platero, Carlos; Campoy, Pascual; Aracil, Rafael

1994-11-01

This paper describes some texture-based techniques that can be applied to quality assessment of flat products continuously produced (metal strips, wooden surfaces, cork, textile products, ...). Since the most difficult task is that of inspecting for product appearance, human-like inspection ability is required. A common feature to all these products is the presence of non- deterministic texture on their surfaces. Two main subjects are discussed: statistical techniques for both surface finishing determination and surface defect analysis as well as real-time implementation for on-line inspection in high-speed applications. For surface finishing determination a Gray Level Difference technique is presented to perform over low resolution images, that is, no-zoomed images. Defect analysis is performed by means of statistical texture analysis over defective portions of the surface. On-line implementation is accomplished by means of neural networks. When a defect arises, textural analysis is applied which result in a data-vector, acting as input of a neural net, previously trained in a supervised way. This approach tries to reach on-line performance in automated visual inspection applications when texture is presented in flat product surfaces.

A Sea-Sky Line Detection Method for Unmanned Surface Vehicles Based on Gradient Saliency

Directory of Open Access Journals (Sweden)

Bo Wang

2016-04-01

Full Text Available Special features in real marine environments such as cloud clutter, sea glint and weather conditions always result in various kinds of interference in optical images, which make it very difficult for unmanned surface vehicles (USVs to detect the sea-sky line (SSL accurately. To solve this problem a saliency-based SSL detection method is proposed. Through the computation of gradient saliency the line features of SSL are enhanced effectively, while other interference factors are relatively suppressed, and line support regions are obtained by a region growing method on gradient orientation. The SSL identification is achieved according to region contrast, line segment length and orientation features, and optimal state estimation of SSL detection is implemented by introducing a cubature Kalman filter (CKF. In the end, the proposed method is tested on a benchmark dataset from the “XL” USV in a real marine environment, and the experimental results demonstrate that the proposed method is significantly superior to other state-of-the-art methods in terms of accuracy rate and real-time performance, and its accuracy and stability are effectively improved by the CKF.

Analysis of the structure of a product line of alcoholic beverages

NARCIS (Netherlands)

Agalarova, C.; Askadullina, A.; Tilburg, van A.

2012-01-01

AB This article deals with marketing decisions on the optimal product line of alcoholic beverages manufactured under the brand name «Praskoveyskoe». KEY WORDS Product line, turnover analysis, ABC-analysis, production of alcoholic beverages, policy to optimize a product line INTRODUCTION A product

Palm-vein classification based on principal orientation features.

Directory of Open Access Journals (Sweden)

Yujia Zhou

Full Text Available Personal recognition using palm-vein patterns has emerged as a promising alternative for human recognition because of its uniqueness, stability, live body identification, flexibility, and difficulty to cheat. With the expanding application of palm-vein pattern recognition, the corresponding growth of the database has resulted in a long response time. To shorten the response time of identification, this paper proposes a simple and useful classification for palm-vein identification based on principal direction features. In the registration process, the Gaussian-Radon transform is adopted to extract the orientation matrix and then compute the principal direction of a palm-vein image based on the orientation matrix. The database can be classified into six bins based on the value of the principal direction. In the identification process, the principal direction of the test sample is first extracted to ascertain the corresponding bin. One-by-one matching with the training samples is then performed in the bin. To improve recognition efficiency while maintaining better recognition accuracy, two neighborhood bins of the corresponding bin are continuously searched to identify the input palm-vein image. Evaluation experiments are conducted on three different databases, namely, PolyU, CASIA, and the database of this study. Experimental results show that the searching range of one test sample in PolyU, CASIA and our database by the proposed method for palm-vein identification can be reduced to 14.29%, 14.50%, and 14.28%, with retrieval accuracy of 96.67%, 96.00%, and 97.71%, respectively. With 10,000 training samples in the database, the execution time of the identification process by the traditional method is 18.56 s, while that by the proposed approach is 3.16 s. The experimental results confirm that the proposed approach is more efficient than the traditional method, especially for a large database.

LINE-BASED MULTI-IMAGE MATCHING FOR FAÇADE RECONSTRUCTION

Directory of Open Access Journals (Sweden)

T. A. Teo

2012-07-01

Full Text Available This research integrates existing LOD 2 building models and multiple close-range images for façade structural lines extraction. The major works are orientation determination and multiple image matching. In the orientation determination, Speeded Up Robust Features (SURF is applied to extract tie points automatically. Then, tie points and control points are combined for block adjustment. An object-based multi-images matching is proposed to extract the façade structural lines. The 2D lines in image space are extracted by Canny operator followed by Hough transform. The role of LOD 2 building models is to correct the tilt displacement of image from different views. The wall of LOD 2 model is also used to generate hypothesis planes for similarity measurement. Finally, average normalized cross correlation is calculated to obtain the best location in object space. The test images are acquired by a nonmetric camera Nikon D2X. The total number of image is 33. The experimental results indicate that the accuracy of orientation determination is about 1 pixel from 2515 tie points and 4 control points. It also indicates that line-based matching is more flexible than point-based matching.

Object-Oriented Programming When Developing Software in Geology and Geophysics

Science.gov (United States)

Ahmadulin, R. K.; Bakanovskaya, L. N.

2017-01-01

The paper reviews the role of object-oriented programming when developing software in geology and geophysics. Main stages have been identified at which it is worthwhile to apply principles of object-oriented programming when developing software in geology and geophysics. The research was based on a number of problems solved in Geology and Petroleum Production Institute. Distinctive features of these problems are given and areas of application of the object-oriented approach are identified. Developing applications in the sphere of geology and geophysics has shown that the process of creating such products is simplified due to the use of object-oriented programming, firstly when designing structures for data storage and graphical user interfaces.

Variables Influencing Food Perception Reviewed for Consumer-Oriented Product Development

NARCIS (Netherlands)

Sijtsema, S.J.; Linnemann, A.R.; Gaasbeek, T.; Dagevos, H.; Jongen, W.M.F.

2002-01-01

Consumer wishes have to be translated into product characteristics to implement consumer-oriented product development. Before this step can be made, insight in food-related behavior and perception of consumers is necessary to make the right, useful, and successful translation. Food choice behavior

Simulation and optimization of logistics distribution for an engine production line

Energy Technology Data Exchange (ETDEWEB)

Song, L.; Jin, S.; Tang, P.

2016-07-01

In order to analyze and study the factors about Logistics distribution system, solve the problems of out of stock on the production line and improve the efficiency of the assembly line. Using the method of industrial engineering, put forward the optimization scheme of distribution system. The simulation model of logistics distribution system for engine assembly line was build based on Witness software. The optimization plan is efficient to improve Logistics distribution efficiency, production of assembly line efficiency and reduce the storage of production line. Based on the study of the modeling and simulation of engine production logistics distribution system, the result reflects some influence factors about production logistics system, which has reference value to improving the efficiency of the production line. (Author)

The Structured Intuitive Model for Product Line Economics (SIMPLE)

National Research Council Canada - National Science Library

Clements, Paul C; McGregor, John D; Cohen, Sholom G

2005-01-01

.... This report presents the Structured Intuitive Model of Product Line Economics (SIMPLE), a general-purpose business model that supports the estimation of the costs and benefits in a product line development organization...

Safety in the design of production lines

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang; Broberg, Ole; Jacobsen, Peter

2006-01-01

This paper is a case study report on how safety considerations were handled in the process of redesigning a production line. The design process was characterized as a specification and negotiation process between engineers from the company and the supplier organization. The new production line...... in the specification material nor in their face-to-face meetings with the supplier. Safety aspects were not part of their work practice. On this basis, it was suggested that formal guidelines or procedures for integrating safety in the design of production lines would have no effect. Instead, the researchers set up...... became safer, but not as a result of any intentional plan to integrate safety aspects into the design process. Instead, the supplier’s design of a new piece of equipment had a higher built-in safety level. The engineering team in the company was aware of the importance of safety aspects neither...

Safety in the redesigning of production lines

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang; Broberg, Ole; Jacobsen, Peter

2006-01-01

This paper is a case study report on how safety considerations were handled in the process of redesigning a production line. The design process was characterized as a specification and negotiation process between engineers from the company and the supplier organization. The new production line...... became safer, but not as a result of any intentional plan to integrate safety aspects into the design process. Instead, the supplier’s design of a new piece of equipment had a higher built-in safety level. The engineering team in the company was aware of the importance of safety aspects neither...... in the specification material nor in their face-to-face meetings with the supplier. Safety aspects were not part of their work practice. On this basis, it was suggested that formal guidelines or procedures for integrating safety in the design of production lines would have no effect. Instead, the researchers set up...

Portfolio analysis of a destination's tourism "product line"

Science.gov (United States)

Harold Daniel

2007-01-01

If we think of a tourist destination as a platform from which a variety of tourist experiences can be delivered, we could conceptualize these experiences as the "product line" offered by or associated with the tourist destination. That conceptualization enables the manager of the destination to employ the logic and discipline associated with product line...

New insights into consumer-oriented food products design

NARCIS (Netherlands)

Almeida Costa, A.I.

2003-01-01

To test the implementation of the most promising methods and tools associated with the early phases of a consumer-oriented approach to food product design;To improve the tested methods, or develop new ones, whenever necessary;To use the results obtained to propose research guidelines leading to

• Simulation and optimization of logistics distribution for an engine production line

  Directory of Open Access Journals (Sweden)

  Lijun Song

  2016-02-01

  Full Text Available Purpose: In order to analyze and study the factors about Logistics distribution system, solve the problems of out of stock on the production line and improve the efficiency of the assembly line. Design/methodology/approach: Using the method of industrial engineering, put forward the optimization scheme of distribution system. The simulation model of logistics distribution system for engine assembly line was build based on Witness software. Findings: The optimization plan is efficient to improve Logistics distribution efficiency, production of assembly line efficiency and reduce the storage of production line Originality/value: Based on the study of the modeling and simulation of engine production logistics distribution system, the result reflects some influence factors about production logistics system, which has reference value to improving the efficiency of the production line.

• Strategic orientations and new product commercialization : mediator, moderator, and interplay

  NARCIS (Netherlands)

  Mu, J.; Di Benedetto, A.C.

  2011-01-01

  Why are some firms more successful at commercializing new products than others in emerging economies? It is possible that the strategic orientations, which firms adopt as a type of business strategy, lead at least partially to the superior performance of the new products they introduce to the

The impact of market orientation, product advantage, and launch proficiency on new product performance and organizational performance

NARCIS (Netherlands)

Robben, H.S.J.; Langerak, F.; Hultink, E.J.

2004-01-01

Some scholars have suggested recently that a market-oriented culture leads to superior performance, at least in part, because of the new products that are developed and are brought to market. Others have reinforced this wisdom by revealing that a market-oriented culture enhances organizational

Share-of-Surplus Product Line Optimisation with Price Levels

Directory of Open Access Journals (Sweden)

X. G. Luo

2014-01-01

Full Text Available Kraus and Yano (2003 established the share-of-surplus product line optimisation model and developed a heuristic procedure for this nonlinear mixed-integer optimisation model. In their model, price of a product is defined as a continuous decision variable. However, because product line optimisation is a planning process in the early stage of product development, pricing decisions usually are not very precise. In this research, a nonlinear integer programming share-of-surplus product line optimization model that allows the selection of candidate price levels for products is established. The model is further transformed into an equivalent linear mixed-integer optimisation model by applying linearisation techniques. Experimental results in different market scenarios show that the computation time of the transformed model is much less than that of the original model.

Feature-based tolerancing for intelligent inspection process definition

International Nuclear Information System (INIS)

Brown, C.W.

1993-07-01

This paper describes a feature-based tolerancing capability that complements a geometric solid model with an explicit representation of conventional and geometric tolerances. This capability is focused on supporting an intelligent inspection process definition system. The feature-based tolerance model's benefits include advancing complete product definition initiatives (e.g., STEP -- Standard for Exchange of Product model dam), suppling computer-integrated manufacturing applications (e.g., generative process planning and automated part programming) with product definition information, and assisting in the solution of measurement performance issues. A feature-based tolerance information model was developed based upon the notion of a feature's toleranceable aspects and describes an object-oriented scheme for representing and relating tolerance features, tolerances, and datum reference frames. For easy incorporation, the tolerance feature entities are interconnected with STEP solid model entities. This schema will explicitly represent the tolerance specification for mechanical products, support advanced dimensional measurement applications, and assist in tolerance-related methods divergence issues

Synergy between Software Product Line and Intelligent Mobile Middleware

DEFF Research Database (Denmark)

Zhang, Weishan; Hansen, Klaus Marius

2007-01-01

with OWL ontology reasoning enhanced BDI (belief-desire-intention) agents in an ongoing research project called PLIMM (product line enabled intelligent mobile middleware), in which Frame based software product line techniques are applied. Besides the advantages of a software product line, our approach can...... handle ontology evolution and keep all related assets in a consistent state. Ontology evolution is a problem that has not been addressed by current mobile middleware. Another advantage is the ability to configure Jadex BDI agents for different purpose and enhance agent intelligence by adding logic...

Raft cultivation area extraction from high resolution remote sensing imagery by fusing multi-scale region-line primitive association features

Science.gov (United States)

Wang, Min; Cui, Qi; Wang, Jie; Ming, Dongping; Lv, Guonian

2017-01-01

In this paper, we first propose several novel concepts for object-based image analysis, which include line-based shape regularity, line density, and scale-based best feature value (SBV), based on the region-line primitive association framework (RLPAF). We then propose a raft cultivation area (RCA) extraction method for high spatial resolution (HSR) remote sensing imagery based on multi-scale feature fusion and spatial rule induction. The proposed method includes the following steps: (1) Multi-scale region primitives (segments) are obtained by image segmentation method HBC-SEG, and line primitives (straight lines) are obtained by phase-based line detection method. (2) Association relationships between regions and lines are built based on RLPAF, and then multi-scale RLPAF features are extracted and SBVs are selected. (3) Several spatial rules are designed to extract RCAs within sea waters after land and water separation. Experiments show that the proposed method can successfully extract different-shaped RCAs from HR images with good performance.

Applying TPM on Production Line of Huanwei

OpenAIRE

Zhai Yunkai; Zhang Jing

2017-01-01

As customers increasingly focus on the quality, cost, delivery time of the product, therefore the production line needs to improve production efficiency, improve product quality, which requires the introduction of a management system. The TPM (Total Productive maintenance) as a starting point to maintain the equipment, maintenance activities through full participation in the maintenance, increase productivity, reduce production costs. The study based on the study and analysis of the TPM th...

ORGANIC PRODUCTION IN UKRAINE: PROBLEMS AND PROSPECTS IN CONTEXT OF SOCIAL ORIENTED ENTEPRENEURSHIP

Directory of Open Access Journals (Sweden)

G. Chornous

2014-06-01

Full Text Available Practical realization of sustainable development general conception is passing to the organic production, that allows to satisfy society problems, not putting health and future generations' existence under a threat. At this entrepreneurs, which work in the consumer products' field, must displace accents from economic oriented to social oriented entrepreneurship. The article is dedicated to research negative and positive factors that influence on social oriented Ukrainian enterprises in the sphere of organic goods production. The special attention is attended to the analysis of foodstuffs producers' activity, the results of which have considerable direct influence on consumers' health. The value of informative influences on consumers and producers is analyzed. State support directions of organic goods production, creation of internal market ecologically safe products infrastructure are defined. Recommendations are given according to research results in relation to stimulation social responsibility of businessmen and model forming, which combines interests of consumers and producers, environmental preservation, population health refinement and ecological situation improvement.

Orientation is different: Interaction between contour integration and feature contrasts in visual search.

Science.gov (United States)

Jingling, Li; Tseng, Chia-Huei; Zhaoping, Li

2013-09-10

Salient items usually capture attention and are beneficial to visual search. Jingling and Tseng (2013), nevertheless, have discovered that a salient collinear column can impair local visual search. The display used in that study had 21 rows and 27 columns of bars, all uniformly horizontal (or vertical) except for one column of bars orthogonally oriented to all other bars, making this unique column of collinear (or noncollinear) bars salient in the display. Observers discriminated an oblique target bar superimposed on one of the bars either in the salient column or in the background. Interestingly, responses were slower for a target in a salient collinear column than in the background. This opens a theoretical question of how contour integration interacts with salience computation, which is addressed here by an examination of how salience modulated the search impairment from the collinear column. We show that the collinear column needs to have a high orientation contrast with its neighbors to exert search interference. A collinear column of high contrast in color or luminance did not produce the same impairment. Our results show that orientation-defined salience interacted with collinear contour differently from other feature dimensions, which is consistent with the neuronal properties in V1.

Object-Oriented Control System Design Using On-Line Training of Artificial Neural Networks

Science.gov (United States)

Rubaai, Ahmed

1997-01-01

This report deals with the object-oriented model development of a neuro-controller design for permanent magnet (PM) dc motor drives. The system under study is described as a collection of interacting objects. Each object module describes the object behaviors, called methods. The characteristics of the object are included in its variables. The knowledge of the object exists within its variables, and the performance is determined by its methods. This structure maps well to the real world objects that comprise the system being modeled. A dynamic learning architecture that possesses the capabilities of simultaneous on-line identification and control is incorporated to enforce constraints on connections and control the dynamics of the motor. The control action is implemented "on-line", in "real time" in such a way that the predicted trajectory follows a specified reference model. A design example of controlling a PM dc motor drive on-line shows the effectiveness of the design tool. This will therefore be very useful in aerospace applications. It is expected to provide an innovative and noval software model for the rocket engine numerical simulator executive.

Computer Graphics Orientation and Training in a Corporate/Production Environment.

Science.gov (United States)

McDevitt, Marsha Jean

This master's thesis provides an overview of a computer graphics production environment and proposes a realistic approach to orientation and on-going training for employees working within a fast-paced production schedule. Problems involved in meeting the training needs of employees are briefly discussed in the first chapter, while the second…

Change Detection of High-Resolution Remote Sensing Images Based on Adaptive Fusion of Multiple Features

Science.gov (United States)

Wang, G. H.; Wang, H. B.; Fan, W. F.; Liu, Y.; Chen, C.

2018-04-01

In view of the traditional change detection algorithm mainly depends on the spectral information image spot, failed to effectively mining and fusion of multi-image feature detection advantage, the article borrows the ideas of object oriented analysis proposed a multi feature fusion of remote sensing image change detection algorithm. First by the multi-scale segmentation of image objects based; then calculate the various objects of color histogram and linear gradient histogram; utilizes the color distance and edge line feature distance between EMD statistical operator in different periods of the object, using the adaptive weighted method, the color feature distance and edge in a straight line distance of combination is constructed object heterogeneity. Finally, the curvature histogram analysis image spot change detection results. The experimental results show that the method can fully fuse the color and edge line features, thus improving the accuracy of the change detection.

Simulation Study of a Vehicle Production Line for Productivity Improvement

Directory of Open Access Journals (Sweden)

M.F.F. Ab Rashid

2015-06-01

Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

Reduction of the environmental concentration of air pollutants by proper geometrical orientation of industrial line sources

International Nuclear Information System (INIS)

Tadmor, J.

1980-01-01

An account is given of an Israeli study of two line sources, one composed of 10 and the other of 20 individual sources. The height of release ranged from 15.7 to 39.6 m, with a uniform rate of release of a gaseous pollutant of 1 Ci/s for each source. Average pollutant concentration was plotted as a function of the rotation angle of the line sources. Reduction of pollutant concentration by a particular rotation of the line sources attained values of up to 50%. At certain rotation angles of the line sources, the environmental concentration was lower even as compared with a single high source. Results also depended on atmospheric conditions. It is suggested that considering the increase in cost of augmenting the height of release as a means of reducing the air pollutant concentration, determination of the optimum geometric orientation of the line sources should be considered as an economical means of improving environmental air quality. (U.K.)

A Software Product Line Vision for Defense Acquisition

National Research Council Canada - National Science Library

Campbell, Grady

2002-01-01

Experience in industry and government over the last 10 years has shown that a software product line approach can significantly improve productivity and product quality, facilitate change, and reduce life-cycle costs...

Aggregate Production Planning, Casestudy in a Medium-sized Industry of the Rubber Production Line in Ecuador.

Science.gov (United States)

Rosero-Mantilla, César; Sánchez-Sailema, Mayra; Sánchez-Rosero, Carlos; Galleguillos-Pozo, Rosa

2017-06-01

This research aims to improve the productivity in the rubber line of a medium-sized industry by increasing the production capacities through the use of the Aggregate Production Planning model. For this purpose an analysis of the production processes of the line was made and the aggregate plan was defined evaluating two strategies: Exact Production Plan (Zero Inventory) and Constant Workforce Plan (Vary Inventory) by studying the costs of both inventory maintenance and workforce. It was also determined how the installed capacity was used with the standards of the rubber line and measures for decreasing production costs were proposed. It was proven that only 70% of the plant capacity was being used so it could be possible to produce more units and to obtain a bigger market for the products of this line.+

3D Representative Volume Element Reconstruction of Fiber Composites via Orientation Tensor and Substructure Features

Energy Technology Data Exchange (ETDEWEB)

Li, Yi; Chen, Wei; Xu, Hongyi; Jin, Xuejun

2016-01-01

To provide a seamless integration of manufacturing processing simulation and fiber microstructure modeling, two new stochastic 3D microstructure reconstruction methods are proposed for two types of random fiber composites: random short fiber composites, and Sheet Molding Compounds (SMC) chopped fiber composites. A Random Sequential Adsorption (RSA) algorithm is first developed to embed statistical orientation information into 3D RVE reconstruction of random short fiber composites. For the SMC composites, an optimized Voronoi diagram based approach is developed for capturing the substructure features of SMC chopped fiber composites. The proposed methods are distinguished from other reconstruction works by providing a way of integrating statistical information (fiber orientation tensor) obtained from material processing simulation, as well as capturing the multiscale substructures of the SMC composites.

Technology Management within Product Lines in High Technology Markets

Science.gov (United States)

Sarangee, Kumar R.

2009-01-01

Understanding the nuances of product line management has been of great interest to business scholars and practitioners. This assumes greater significance for firms conducting business in technologically dynamic industries, where they face certain challenges regarding the management of multiple, overlapping technologies within their product lines.…

A systematic apporach to service oriented product development

DEFF Research Database (Denmark)

Matzen, Detlef

Throughout the last years, manufacturing industry has experienced a trend towards a higher level of operational integration with their customers, i.e. manufacturers differentiate their offer from competitors by combining physical and software products with service plans and service support...... operations. This integration of manufacturing and service business holds a number of potential advantages, such as optimised operational performance and improved insights into use phase processes. To realise these potential advantages, products and service operations must fit to and support each other, which...... calls for an integrated approach to their development. The integrated development of solution concepts spanning products, service delivery systems and matching delivery business models is the theme of this thesis. A design based approach - service oriented product development - is proposed...

AUTOMATIC GLOBAL REGISTRATION BETWEEN AIRBORNE LIDAR DATA AND REMOTE SENSING IMAGE BASED ON STRAIGHT LINE FEATURES

Directory of Open Access Journals (Sweden)

Z. Q. Liu

2018-04-01

Full Text Available An automatic global registration approach for point clouds and remote sensing image based on straight line features is proposed which is insensitive to rotational and scale transformation. First, the building ridge lines and contour lines in point clouds are automatically detected as registration primitives by integrating region growth and topology identification. Second, the collinear condition equation is selected as registration transformation function which is based on rotation matrix described by unit quaternion. The similarity measure is established according to the distance between the corresponding straight line features from point clouds and the image in the same reference coordinate system. Finally, an iterative Hough transform is adopted to simultaneously estimate the parameters and obtain correspondence between registration primitives. Experimental results prove the proposed method is valid and the spectral information is useful for the following classification processing.

Productivity Effects of United States Multinational Enterprises : The Roles of Market Orientation and Regional Integration

NARCIS (Netherlands)

Smeets, Roger; Wei, Yingqi

2010-01-01

Smeets R. and Wei Y. Productivity effects of United States multinational enterprises: the roles of market orientation and regional integration, Regional Studies. This paper considers the role of market orientation and regional integration in foreign direct investment (FDI) productivity effects.

Lean buffering in serial production lines with Bernoulli machines

Directory of Open Access Journals (Sweden)

A. B. Hu

2006-01-01

Full Text Available Lean buffering is the smallest buffer capacity necessary to ensure the desired production rate of a manufacturing system. In this paper, analytical methods for selecting lean buffering in serial production lines are developed under the assumption that the machines obey the Bernoulli reliability model. Both closed-form expressions and recursive approaches are investigated. The cases of identical and nonidentical machines are analyzed. Results obtained can be useful for production line designers and production managers to maintain the required production rate with the smallest possible inventories.

Objective Oriented Design of Architecture for TH System Safety Analysis Code and Verification

Energy Technology Data Exchange (ETDEWEB)

Chung, Bub Dong

2008-03-15

In this work, objective oriented design of generic system analysis code has been tried based on the previous works in KAERI for two phase three field Pilot code. It has been performed to implement of input and output design, TH solver, component model, special TH models, heat structure solver, general table, trip and control, and on-line graphics. All essential features for system analysis has been designed and implemented in the final product SYSTF code. The computer language C was used for implementation in the Visual studio 2008 IDE (Integrated Development Environment) since it has easier and lighter than C++ feature. The code has simple and essential features of models and correlation, special component, special TH model and heat structure model. However the input features is able to simulate the various scenarios, such as steady state, non LOCA transient and LOCA accident. The structure validity has been tested through the various verification tests and it has been shown that the developed code can treat the non LOCA and LOCA simulation. However more detailed design and implementation of models are required to get the physical validity of SYSTF code simulation.

Objective Oriented Design of Architecture for TH System Safety Analysis Code and Verification

International Nuclear Information System (INIS)

Chung, Bub Dong

2008-03-01

In this work, objective oriented design of generic system analysis code has been tried based on the previous works in KAERI for two phase three field Pilot code. It has been performed to implement of input and output design, TH solver, component model, special TH models, heat structure solver, general table, trip and control, and on-line graphics. All essential features for system analysis has been designed and implemented in the final product SYSTF code. The computer language C was used for implementation in the Visual studio 2008 IDE (Integrated Development Environment) since it has easier and lighter than C++ feature. The code has simple and essential features of models and correlation, special component, special TH model and heat structure model. However the input features is able to simulate the various scenarios, such as steady state, non LOCA transient and LOCA accident. The structure validity has been tested through the various verification tests and it has been shown that the developed code can treat the non LOCA and LOCA simulation. However more detailed design and implementation of models are required to get the physical validity of SYSTF code simulation

Resolving traceability issues of product derivation for software product lines

OpenAIRE

Abid, Saad bin

2009-01-01

peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

Pattern recognition invariant under changes of scale and orientation

Science.gov (United States)

Arsenault, Henri H.; Parent, Sebastien; Moisan, Sylvain

1997-08-01

We have used a modified method proposed by neiberg and Casasent to successfully classify five kinds of military vehicles. The method uses a wedge filter to achieve scale invariance, and lines in a multi-dimensional feature space correspond to each target with out-of-plane orientations over 360 degrees around a vertical axis. The images were not binarized, but were filtered in a preprocessing step to reduce aliasing. The feature vectors were normalized and orthogonalized by means of a neural network. Out-of-plane rotations of 360 degrees and scale changes of a factor of four were considered. Error-free classification was achieved.

Satisfying Product Features of a Fall Prevention Smartphone App and Potential Users’ Willingness to Pay: Web-Based Survey Among Older Adults

Science.gov (United States)

Mertens, Alexander; Brandl, Christopher; Liu, Shan; Buecking, Benjamin; Bliemel, Christopher; Horst, Klemens; Weber, Christian David; Lichte, Philipp; Knobe, Matthias

2018-01-01

Background Prohibiting falls and fall-related injuries is a major challenge for health care systems worldwide, as a substantial proportion of falls occur in older adults who are previously known to be either frail or at high risk for falls. Hence, preventive measures are needed to educate and minimize the risk for falls rather than just minimize older adults’ fall risk. Health apps have the potential to address this problem, as they enable users to self-assess their individual fall risk. Objective The objective of this study was to identify product features of a fall prevention smartphone app, which increase or decrease users’ satisfaction. In addition, willingness to pay (WTP) was assessed to explore how much revenue such an app could generate. Methods A total of 96 participants completed an open self-selected Web-based survey. Participants answered various questions regarding health status, subjective and objective fall risk, and technical readiness. Seventeen predefined product features of a fall prevention smartphone app were evaluated twice: first, according to a functional (product feature is implemented in the app), and subsequently by a dysfunctional (product feature is not implemented in the app) question. On the basis of the combination of answers from these 2 questions, the product feature was assigned to a certain category (must-be, attractive, one-dimensional, indifferent, or questionable product feature). This method is widely used in user-oriented product development and captures users’ expectations of a product and how their satisfaction is influenced by the availability of individual product features. Results Five product features were identified to increase users’ acceptance, including (1) a checklist of typical tripping hazards, (2) an emergency guideline in case of a fall, (3) description of exercises and integrated workout plans that decrease the risk of falling, (4) inclusion of a continuous workout program, and (5) cost coverage by

77 FR 840 - Pricing for 2012 Products Featuring $1 Coins

Science.gov (United States)

2012-01-06

... DEPARTMENT OF THE TREASURY United States Mint Pricing for 2012 Products Featuring $1 Coins AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing 2012 pricing for products featuring $1 coins, as follows: Product Retail price Presidential $1...

Formulation of a Production Strategy for a Software Product Line

Science.gov (United States)

2009-08-01

Strategy 9 5.1 Identifying the Critical Factors 9 5.1.1 Market Analysis 10 5.1.2 Building a Business Case 10 5.1.3 Scoping 10 5.1.4 Technology...ability to deliver new products quickly (i.e., its time to market ). The production strategy for a software product line is the high-level description of... strategy . The critical factors mentioned above refer to both market conditions that affect an organ- ization and how an organization’s products can

Nongaussian Features from Inflationary Particle Production

International Nuclear Information System (INIS)

Barnaby, Neil

2010-01-01

The inflaton field can be expected to couple to a number of additional fields whose energy density does not play any significant role in driving inflation. Such couplings may lead to isolated bursts of particle production during inflation, for example via parametric resonance or a phase transition, and leave observable imprints in the cosmological fluctuations. I illustrate this effect for a simple prototype interaction g 2 (φ - φ 0 ) 2 χ between the inflaton, φ, and iso-inflaton, χ. Using both classical lattice simulations and analytical quantum field theory computations, I show that this mechanism generates localized bump-like features in the power spectrum and also a completely new type of nongaussianity. Observations are consistent with relatively large features of this type and the nongaussianity from particle production may be observable in future missions.

Effect of failures and repairs on multiple cell production lines

Energy Technology Data Exchange (ETDEWEB)

Legato, P.; Bobbio, A.; Roberti, L.

1989-01-01

This paper examines a production line composed of multiple stages, or cells, which are passed in sequential order to arrive to the final product. Two possible coordination disciplines are considered, namely: the classical tandem arrangement of sequential working centers with input buffer and the kanban scheme, considered the Japanese shop floor realization of the Just-In-Time (JIT) manifacturing approach. The production line is modelled and analysed by means of Stochastic Petri Nets (SPN). Finally an analysis is made of the possibility that the working cells can incur failure/repair cycles perturbing the production flow of the line and thus reduce performance indices.

Controlling line-edge roughness and reactive ion etch lag in sub-150 nm features in borophosphosilicate glass

International Nuclear Information System (INIS)

Bhatnagar, Parijat; Panda, Siddhartha; Edleman, Nikki L.; Allen, Scott D.; Wise, Richard; Mahorowala, Arpan

2007-01-01

We have developed a reactive ion etch (RIE) process in borophosphosilicate glass (BPSG) for 150 nm line-and-space features, where line-edge roughness (LER) complemented with RIE lag becomes a major issue. Effect of flow rates and carbon-to-fluorine atomic ratio of fluorohydrocarbon gases was utilized to achieve acceptable process window allowing lower radio frequency powers therefore obtaining acceptable LER and RIE lag in the high-resolution features etched into BPSG

A first-generation software product line for data acquisition systems in astronomy

Science.gov (United States)

López-Ruiz, J. C.; Heradio, Rubén; Cerrada Somolinos, José Antonio; Coz Fernandez, José Ramón; López Ramos, Pablo

2008-07-01

This article presents a case study on developing a software product line for data acquisition systems in astronomy based on the Exemplar Driven Development methodology and the Exemplar Flexibilization Language tool. The main strategies to build the software product line are based on the domain commonality and variability, the incremental scope and the use of existing artifacts. It consists on a lean methodology with little impact on the organization, suitable for small projects, which reduces product line start-up time. Software Product Lines focuses on creating a family of products instead of individual products. This approach has spectacular benefits on reducing the time to market, maintaining the know-how, reducing the development costs and increasing the quality of new products. The maintenance of the products is also enhanced since all the data acquisition systems share the same product line architecture.

EVo: Net Shape RTM Production Line

Directory of Open Access Journals (Sweden)

Sven Torstrick

2016-04-01

Full Text Available EVo research platform is operated by the Center for Lightweight-Production-Technology of the German Aerospace Center in Stade. Its objective is technology demonstration of a fully automated RTM (Resin Transfer Molding production line for composite parts in large quantities. Process steps include cutting and ply handling, draping, stacking, hot-forming, preform-trimming to net shape, resin injection, curing and demolding.

Total productive maintenance on example of automated foundry lines

Directory of Open Access Journals (Sweden)

S. Kukla

2009-07-01

Full Text Available Within framework of the presented study one has performed analysis of stoppages in automatic foundry lines operation, and basing on assumptions from complex maintenance system has undertaken himself to develop a service maintenance schedule for machinery installed in the line. Moreover, one has presented general assumptions of TPM system operated in conditions of series and multi-series production of cast iron castings. One has constructed operational database and has elaborated a list of line stoppage causes within a year. One has proposed a possibility of implementation of manufacturing systems modeling and simulating technique in management of production machinery operation in a foundry shop. Within framework of the simulation experiment one has developed schedules of production, schedules of maintenance and has forecasted indices of general productivity of the machinery for a various scenarios of events on example of casting line having in-series structure of operational reliability. In course of the study there was implemented ARENA universal software package to modeling and simulation of the manufacturing systems.

Opinion mining feature-level using Naive Bayes and feature extraction based analysis dependencies

Science.gov (United States)

Sanda, Regi; Baizal, Z. K. Abdurahman; Nhita, Fhira

2015-12-01

Development of internet and technology, has major impact and providing new business called e-commerce. Many e-commerce sites that provide convenience in transaction, and consumers can also provide reviews or opinions on products that purchased. These opinions can be used by consumers and producers. Consumers to know the advantages and disadvantages of particular feature of the product. Procuders can analyse own strengths and weaknesses as well as it's competitors products. Many opinions need a method that the reader can know the point of whole opinion. The idea emerged from review summarization that summarizes the overall opinion based on sentiment and features contain. In this study, the domain that become the main focus is about the digital camera. This research consisted of four steps 1) giving the knowledge to the system to recognize the semantic orientation of an opinion 2) indentify the features of product 3) indentify whether the opinion gives a positive or negative 4) summarizing the result. In this research discussed the methods such as Naï;ve Bayes for sentiment classification, and feature extraction algorithm based on Dependencies Analysis, which is one of the tools in Natural Language Processing (NLP) and knowledge based dictionary which is useful for handling implicit features. The end result of research is a summary that contains a bunch of reviews from consumers on the features and sentiment. With proposed method, accuration for sentiment classification giving 81.2 % for positive test data, 80.2 % for negative test data, and accuration for feature extraction reach 90.3 %.

How do you select the right security features for your company's products

Science.gov (United States)

Pickett, Gordon E.

1998-04-01

If your company manufacturers, supplies, or distributes products of almost any type, style, shape, or for any usage, they may become the objective of fraudulent activities from one or more sources. Therefore, someone at your company should be concerned about how these activities may affect the company's future. This paper/presentation will provide information about where these 'threats' may come from, what products have been compromised in the past, and what steps might be taken to deter these threats. During product security conferences, conversations, and other sources of information, you'll hear about many different types of security features that can be incorporated into monetary and identification documents, packaging, labeling, and other products/systems to help protect against counterfeiting, unauthorized tampering, or to identify 'genuine' products. Many of these features have been around for some time (which means that they may have lost at least some of their effectiveness) while others, or improved versions of some of the more mature features, have been or are being developed. This area is a 'moving target' and re-examination of the threats and counterthreats needs to be an ongoing activity. The 'value' and the capabilities of these features can sometimes be overstated, i.e. that a feature/system can solve all of the security-related problems that you may (or may not) have with your products. A couple of things to always keep in mind is that no feature(s) is universally effective and none of the features, or even combinations of features, is totally 'tamperproof' or counterfeitproof, irrespective of what may be said or claimed. So how do you go about determining if you have a product security problem and what, if any, security features might be used to reduce the threat(s) to your products? This paper will attempt to provide information to help you separate the 'wheat from the chaff' in these considerations. Specifically, information to be discussed in

Emergent interfaces for feature modularization

CERN Document Server

Ribeiro, Márcio; Brabrand, Claus

2014-01-01

Developers frequently introduce errors into software systems when they fail to recognise module dependencies. Using forty-three software families and Software Product Lines (SPLs), where the majority are commonly used in industrial practice, the authors reports on the feature modularization problem and provides a study of how often it may occur in practice. To solve the problem they present the concept of emergent feature modularization which aims to establish contracts between features to prevent developers from breaking other features when performing a maintenance task.

Chinese character recognition based on Gabor feature extraction and CNN

Science.gov (United States)

Xiong, Yudian; Lu, Tongwei; Jiang, Yongyuan

2018-03-01

As an important application in the field of text line recognition and office automation, Chinese character recognition has become an important subject of pattern recognition. However, due to the large number of Chinese characters and the complexity of its structure, there is a great difficulty in the Chinese character recognition. In order to solve this problem, this paper proposes a method of printed Chinese character recognition based on Gabor feature extraction and Convolution Neural Network(CNN). The main steps are preprocessing, feature extraction, training classification. First, the gray-scale Chinese character image is binarized and normalized to reduce the redundancy of the image data. Second, each image is convoluted with Gabor filter with different orientations, and the feature map of the eight orientations of Chinese characters is extracted. Third, the feature map through Gabor filters and the original image are convoluted with learning kernels, and the results of the convolution is the input of pooling layer. Finally, the feature vector is used to classify and recognition. In addition, the generalization capacity of the network is improved by Dropout technology. The experimental results show that this method can effectively extract the characteristics of Chinese characters and recognize Chinese characters.

Critical product features' identification using an opinion analyzer.

Science.gov (United States)

Shamim, Azra; Balakrishnan, Vimala; Tahir, Muhammad; Shiraz, Muhammad

2014-01-01

The increasing use and ubiquity of the Internet facilitate dissemination of word-of-mouth through blogs, online forums, newsgroups, and consumer's reviews. Online consumer's reviews present tremendous opportunities and challenges for consumers and marketers. One of the challenges is to develop interactive marketing practices for making connections with target consumers that capitalize consumer-to-consumer communications for generating product adoption. Opinion mining is employed in marketing to help consumers and enterprises in the analysis of online consumers' reviews by highlighting the strengths and weaknesses of the products. This paper describes an opinion mining system based on novel review and feature ranking methods to empower consumers and enterprises for identifying critical product features from enormous consumers' reviews. Consumers and business analysts are the main target group for the proposed system who want to explore consumers' feedback for determining purchase decisions and enterprise strategies. We evaluate the proposed system on real dataset. Results show that integration of review and feature-ranking methods improves the decision making processes significantly.

Visual coherence for large-scale line-plot visualizations

KAUST Repository

Muigg, Philipp

2011-06-01

Displaying a large number of lines within a limited amount of screen space is a task that is common to many different classes of visualization techniques such as time-series visualizations, parallel coordinates, link-node diagrams, and phase-space diagrams. This paper addresses the challenging problems of cluttering and overdraw inherent to such visualizations. We generate a 2x2 tensor field during line rasterization that encodes the distribution of line orientations through each image pixel. Anisotropic diffusion of a noise texture is then used to generate a dense, coherent visualization of line orientation. In order to represent features of different scales, we employ a multi-resolution representation of the tensor field. The resulting technique can easily be applied to a wide variety of line-based visualizations. We demonstrate this for parallel coordinates, a time-series visualization, and a phase-space diagram. Furthermore, we demonstrate how to integrate a focus+context approach by incorporating a second tensor field. Our approach achieves interactive rendering performance for large data sets containing millions of data items, due to its image-based nature and ease of implementation on GPUs. Simulation results from computational fluid dynamics are used to evaluate the performance and usefulness of the proposed method. © 2011 The Author(s).

Visual coherence for large-scale line-plot visualizations

KAUST Repository

Muigg, Philipp; Hadwiger, Markus; Doleisch, Helmut; Grö ller, Eduard M.

2011-01-01

Displaying a large number of lines within a limited amount of screen space is a task that is common to many different classes of visualization techniques such as time-series visualizations, parallel coordinates, link-node diagrams, and phase-space diagrams. This paper addresses the challenging problems of cluttering and overdraw inherent to such visualizations. We generate a 2x2 tensor field during line rasterization that encodes the distribution of line orientations through each image pixel. Anisotropic diffusion of a noise texture is then used to generate a dense, coherent visualization of line orientation. In order to represent features of different scales, we employ a multi-resolution representation of the tensor field. The resulting technique can easily be applied to a wide variety of line-based visualizations. We demonstrate this for parallel coordinates, a time-series visualization, and a phase-space diagram. Furthermore, we demonstrate how to integrate a focus+context approach by incorporating a second tensor field. Our approach achieves interactive rendering performance for large data sets containing millions of data items, due to its image-based nature and ease of implementation on GPUs. Simulation results from computational fluid dynamics are used to evaluate the performance and usefulness of the proposed method. © 2011 The Author(s).

A prototype on-line work procedure system for radioisotope thermoelectric generator production

International Nuclear Information System (INIS)

Kiebel, G.R.

1991-09-01

An on-line system to manage work procedures is being developed to support radioisotope thermoelectric generator (RTG) assembly and testing in a new production facility. This system implements production work procedures as interactive electronic documents executed at the work site with no intermediate printed form. It provides good control of the creation and application of work procedures and provides active assistance to the worker in performing them and in documenting the results. An extensive prototype of this system is being evaluated to ensure that it will have all the necessary features and that it will fit the user's needs and expectations. This effort has involved the Radioisotope Power Systems Facility (RPSF) operations organization and technology transfer between Westinghouse Hanford Company (Westinghouse Hanford) and EG ampersand G Mound Applied Technologies Inc. (Mound) at the US Department of Energy (DOE) Mound Site. 1 ref

Updating of visual orientation in a gravity-based reference frame.

Science.gov (United States)

Niehof, Nynke; Tramper, Julian J; Doeller, Christian F; Medendorp, W Pieter

2017-10-01

The brain can use multiple reference frames to code line orientation, including head-, object-, and gravity-centered references. If these frames change orientation, their representations must be updated to keep register with actual line orientation. We tested this internal updating during head rotation in roll, exploiting the rod-and-frame effect: The illusory tilt of a vertical line surrounded by a tilted visual frame. If line orientation is stored relative to gravity, these distortions should also affect the updating process. Alternatively, if coding is head- or frame-centered, updating errors should be related to the changes in their orientation. Ten subjects were instructed to memorize the orientation of a briefly flashed line, surrounded by a tilted visual frame, then rotate their head, and subsequently judge the orientation of a second line relative to the memorized first while the frame was upright. Results showed that updating errors were mostly related to the amount of subjective distortion of gravity at both the initial and final head orientation, rather than to the amount of intervening head rotation. In some subjects, a smaller part of the updating error was also related to the change of visual frame orientation. We conclude that the brain relies primarily on a gravity-based reference to remember line orientation during head roll.

Temporal resolution of orientation-defined texture segregation: a VEP study.

Science.gov (United States)

Lachapelle, Julie; McKerral, Michelle; Jauffret, Colin; Bach, Michael

2008-09-01

Orientation is one of the visual dimensions that subserve figure-ground discrimination. A spatial gradient in orientation leads to "texture segregation", which is thought to be concurrent parallel processing across the visual field, without scanning. In the visual-evoked potential (VEP) a component can be isolated which is related to texture segregation ("tsVEP"). Our objective was to evaluate the temporal frequency dependence of the tsVEP to compare processing speed of low-level features (e.g., orientation, using the VEP, here denoted llVEP) with texture segregation because of a recent literature controversy in that regard. Visual-evoked potentials (VEPs) were recorded in seven normal adults. Oriented line segments of 0.1 degrees x 0.8 degrees at 100% contrast were presented in four different arrangements: either oriented in parallel for two homogeneous stimuli (from which were obtained the low-level VEP (llVEP)) or with a 90 degrees orientation gradient for two textured ones (from which were obtained the texture VEP). The orientation texture condition was presented at eight different temporal frequencies ranging from 7.5 to 45 Hz. Fourier analysis was used to isolate low-level components at the pattern-change frequency and texture-segregation components at half that frequency. For all subjects, there was lower high-cutoff frequency for tsVEP than for llVEPs, on average 12 Hz vs. 17 Hz (P = 0.017). The results suggest that the processing of feature gradients to extract texture segregation requires additional processing time, resulting in a lower fusion frequency.

RNA-Seq of Bacillus licheniformis: active regulatory RNA features expressed within a productive fermentation

Science.gov (United States)

2013-01-01

Background The production of enzymes by an industrial strain requires a complex adaption of the bacterial metabolism to the conditions within the fermenter. Regulatory events within the process result in a dynamic change of the transcriptional activity of the genome. This complex network of genes is orchestrated by proteins as well as regulatory RNA elements. Here we present an RNA-Seq based study considering selected phases of an industry-oriented fermentation of Bacillus licheniformis. Results A detailed analysis of 20 strand-specific RNA-Seq datasets revealed a multitude of transcriptionally active genomic regions. 3314 RNA features encoded by such active loci have been identified and sorted into ten functional classes. The identified sequences include the expected RNA features like housekeeping sRNAs, metabolic riboswitches and RNA switches well known from studies on Bacillus subtilis as well as a multitude of completely new candidates for regulatory RNAs. An unexpectedly high number of 855 RNA features are encoded antisense to annotated protein and RNA genes, in addition to 461 independently transcribed small RNAs. These antisense transcripts contain molecules with a remarkable size range variation from 38 to 6348 base pairs in length. The genome of the type strain B. licheniformis DSM13 was completely reannotated using data obtained from RNA-Seq analyses and from public databases. Conclusion The hereby generated data-sets represent a solid amount of knowledge on the dynamic transcriptional activities during the investigated fermentation stages. The identified regulatory elements enable research on the understanding and the optimization of crucial metabolic activities during a productive fermentation of Bacillus licheniformis strains. PMID:24079885

RNA-Seq of Bacillus licheniformis: active regulatory RNA features expressed within a productive fermentation.

Science.gov (United States)

Wiegand, Sandra; Dietrich, Sascha; Hertel, Robert; Bongaerts, Johannes; Evers, Stefan; Volland, Sonja; Daniel, Rolf; Liesegang, Heiko

2013-10-01

The production of enzymes by an industrial strain requires a complex adaption of the bacterial metabolism to the conditions within the fermenter. Regulatory events within the process result in a dynamic change of the transcriptional activity of the genome. This complex network of genes is orchestrated by proteins as well as regulatory RNA elements. Here we present an RNA-Seq based study considering selected phases of an industry-oriented fermentation of Bacillus licheniformis. A detailed analysis of 20 strand-specific RNA-Seq datasets revealed a multitude of transcriptionally active genomic regions. 3314 RNA features encoded by such active loci have been identified and sorted into ten functional classes. The identified sequences include the expected RNA features like housekeeping sRNAs, metabolic riboswitches and RNA switches well known from studies on Bacillus subtilis as well as a multitude of completely new candidates for regulatory RNAs. An unexpectedly high number of 855 RNA features are encoded antisense to annotated protein and RNA genes, in addition to 461 independently transcribed small RNAs. These antisense transcripts contain molecules with a remarkable size range variation from 38 to 6348 base pairs in length. The genome of the type strain B. licheniformis DSM13 was completely reannotated using data obtained from RNA-Seq analyses and from public databases. The hereby generated data-sets represent a solid amount of knowledge on the dynamic transcriptional activities during the investigated fermentation stages. The identified regulatory elements enable research on the understanding and the optimization of crucial metabolic activities during a productive fermentation of Bacillus licheniformis strains.

Automatic Samples Selection Using Histogram of Oriented Gradients (HOG Feature Distance

Directory of Open Access Journals (Sweden)

Inzar Salfikar

2018-01-01

Full Text Available Finding victims at a disaster site is the primary goal of Search-and-Rescue (SAR operations. Many technologies created from research for searching disaster victims through aerial imaging. but, most of them are difficult to detect victims at tsunami disaster sites with victims and backgrounds which are look similar. This research collects post-tsunami aerial imaging data from the internet to builds dataset and model for detecting tsunami disaster victims. Datasets are built based on distance differences from features every sample using Histogram-of-Oriented-Gradient (HOG method. We use the longest distance to collect samples from photo to generate victim and non-victim samples. We claim steps to collect samples by measuring HOG feature distance from all samples. the longest distance between samples will take as a candidate to build the dataset, then classify victim (positives and non-victim (negatives samples manually. The dataset of tsunami disaster victims was re-analyzed using cross-validation Leave-One-Out (LOO with Support-Vector-Machine (SVM method. The experimental results show the performance of two test photos with 61.70% precision, 77.60% accuracy, 74.36% recall and f-measure 67.44% to distinguish victim (positives and non-victim (negatives.

Effects of Orientation on Recognition of Facial Affect

Science.gov (United States)

Cohen, M. M.; Mealey, J. B.; Hargens, Alan R. (Technical Monitor)

1997-01-01

The ability to discriminate facial features is often degraded when the orientation of the face and/or the observer is altered. Previous studies have shown that gross distortions of facial features can go unrecognized when the image of the face is inverted, as exemplified by the 'Margaret Thatcher' effect. This study examines how quickly erect and supine observers can distinguish between smiling and frowning faces that are presented at various orientations. The effects of orientation are of particular interest in space, where astronauts frequently view one another in orientations other than the upright. Sixteen observers viewed individual facial images of six people on a computer screen; on a given trial, the image was either smiling or frowning. Each image was viewed when it was erect and when it was rotated (rolled) by 45 degrees, 90 degrees, 135 degrees, 180 degrees, 225 degrees and 270 degrees about the line of sight. The observers were required to respond as rapidly and accurately as possible to identify if the face presented was smiling or frowning. Measures of reaction time were obtained when the observers were both upright and supine. Analyses of variance revealed that mean reaction time, which increased with stimulus rotation (F=18.54, df 7/15, p (is less than) 0.001), was 22% longer when the faces were inverted than when they were erect, but that the orientation of the observer had no significant effect on reaction time (F=1.07, df 1/15, p (is greater than) .30). These data strongly suggest that the orientation of the image of a face on the observer's retina, but not its orientation with respect to gravity, is important in identifying the expression on the face.

Oriented Shape Index Histograms for Cell Classification

DEFF Research Database (Denmark)

Larsen, Anders Boesen Lindbo; Dahl, Anders Bjorholm; Larsen, Rasmus

2015-01-01

We propose a novel extension to the shape index histogram feature descriptor where the orientation of the second-order curvature is included in the histograms. The orientation of the shape index is reminiscent but not equal to gradient orientation which is widely used for feature description. We...... evaluate our new feature descriptor using a public dataset consisting of HEp-2 cell images from indirect immunoflourescence lighting. Our results show that we can improve classification performance significantly when including the shape index orientation. Notably, we show that shape index orientation...

Satisfying Product Features of a Fall Prevention Smartphone App and Potential Users' Willingness to Pay: Web-Based Survey Among Older Adults.

Science.gov (United States)

Rasche, Peter; Mertens, Alexander; Brandl, Christopher; Liu, Shan; Buecking, Benjamin; Bliemel, Christopher; Horst, Klemens; Weber, Christian David; Lichte, Philipp; Knobe, Matthias

2018-03-27

Prohibiting falls and fall-related injuries is a major challenge for health care systems worldwide, as a substantial proportion of falls occur in older adults who are previously known to be either frail or at high risk for falls. Hence, preventive measures are needed to educate and minimize the risk for falls rather than just minimize older adults' fall risk. Health apps have the potential to address this problem, as they enable users to self-assess their individual fall risk. The objective of this study was to identify product features of a fall prevention smartphone app, which increase or decrease users' satisfaction. In addition, willingness to pay (WTP) was assessed to explore how much revenue such an app could generate. A total of 96 participants completed an open self-selected Web-based survey. Participants answered various questions regarding health status, subjective and objective fall risk, and technical readiness. Seventeen predefined product features of a fall prevention smartphone app were evaluated twice: first, according to a functional (product feature is implemented in the app), and subsequently by a dysfunctional (product feature is not implemented in the app) question. On the basis of the combination of answers from these 2 questions, the product feature was assigned to a certain category (must-be, attractive, one-dimensional, indifferent, or questionable product feature). This method is widely used in user-oriented product development and captures users' expectations of a product and how their satisfaction is influenced by the availability of individual product features. Five product features were identified to increase users' acceptance, including (1) a checklist of typical tripping hazards, (2) an emergency guideline in case of a fall, (3) description of exercises and integrated workout plans that decrease the risk of falling, (4) inclusion of a continuous workout program, and (5) cost coverage by health insurer. Participants' WTP was assessed

Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

Science.gov (United States)

Ritprasertsri, Thitima; Chutima, Parames

2017-06-01

In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

Impact of Strategic Orientation Dimensions on New Product Development in Agro-based Nigerian Firms

OpenAIRE

Ibidunni Ayodotun Stephen; Falola Hezekiah Olubusayo

2013-01-01

This study explores the impact of strategic orientation dimensions on new product development capability of firms in the agro-business industry. The study based on questionnaires administered to selected agro-based firms in Lagos and Ogun states (Nigeria) utilized descriptive statistics, Pearson’s correlation to analyze the data obtained for the study. Results of data analysis showed that there exist positive relationship between strategic orientation dimensions and new product development. H...

Manufacturing lines under surplus-based control : multiple products and bounded buffers

NARCIS (Netherlands)

Starkov, K.; Pogromskiy, A.Y.; Adan, I.J.B.F.

2015-01-01

Challenged by the scheduling complexity for production flow processes in industrial facilities, we study the performance of multi-product producing lines. We analyse the performance of multi-product lines that consist a number of machines and bounded buffers with preselected base stock levels. It is

Consumer-oriented innovation in the food and personal care products sectors

DEFF Research Database (Denmark)

Grunert, K.G.; Jensen, B.B.; Sonne, A. M.

2010-01-01

In this chapter, we clarify the concept of consumer-oriented innovation in the food and personal products sectors and define it as a process towards the development of a new product or service in which an integrated analysis and understanding of consumers wants, needs and preference formation play...... a key role. We then outline relevant streams of research that may promote the implementation of consumer-oriented innovation in these sectors. We first review research on understanding consumers, notably on the quality perception, associated methods, and their application in innovation processes. We...... then review research on innovation management, emphasizing the use of consumer insight information in innovation processes. We conclude that a better integration of consumer research and research on innovation management would benefit the innovation process....

Development of an Innovation Model Based on a Service-Oriented Product Service System (PSS

Directory of Open Access Journals (Sweden)

Seungkyum Kim

2015-10-01

Full Text Available Recently, there have been many attempts to cope with increasingly-diversified and ever-changing customer needs by combining products and services that are critical components of innovation models. Although not only manufacturers, but also service providers, try to integrate products and services, most of the previous studies on Product Service System (PSS development deal with how to effectively integrate services into products from the product-centric point of view. Services provided by manufacturers’ PSSes, such as delivery services, training services, disposal services, and so on, offer customers ancillary value, whereas products of service providers’ PSSes enrich core value by enhancing the functionality and quality of the service. Thus, designing an effective PSS development process from the service-centric point of view is an important research topic. Accordingly, the purpose of this paper is to propose a service-oriented PSS development process, which consists of four stages: (1 strategic planning; (2 idea generation and selection; (3 service design; and (4 product development. In the proposed approach, the PSS development project is initiated and led by a service provider from a service-centric point of view. From the perspective of methodology, customer needs are converted into product functions according to Quality Function Deployment (QFD, while Analytic Hierarchy Process (AHP is employed to prioritize the functions. Additionally, this paper illustrates a service-oriented PSS development that demonstrates the application of the proposed process. The proposed process and illustration are expected to serve as a foundation for research on service-oriented PSS development and as a useful guideline for service providers who are considering the development of a service-oriented PSS.

Voluntary Tools Of The Environmental Oriented Product Policy

Science.gov (United States)

Rusko, Miroslav

2015-06-01

Environmentally oriented product policy is in general determined by the relationships between its aims - subjects - objects - tools. It is based on the integrated approach to the product life cycle, which anticipates an enormous amount of information. It has to solve the questions of the international trade as well as the rules of the International Trade Organization. New forms of preventive environmental strategies and especially Green Marketing are being introduced helping to solve environmental problems and environmental motivation of producers. Many producers face great attention of the public regarding their approach to the environment. Despite the fact that the customers buy products fairly prudently and their behaviour is markedly affected by prices, a particular part of the population prefers the products that do not burden the environment. This brings about a situation, in which the producers within their mutual competition and in relation to customers are enforced to behave responsibly.

Comparison of Czech, Slovak and Swiss Product Innovation Oriented Firms’ Communication in Social Media

Directory of Open Access Journals (Sweden)

Vít Chlebovský

2015-01-01

Full Text Available Objective of the research described in this article is to analyze and compare the use of social media communication channels in Czech, Slovak and Swiss product innovation oriented companies, where Swiss set of the companies is used as a benchmark. Primary research was made through manual activity scanning of the selected companies within social media. European company database Amadeus provided by Bureau van Dijk was used for the company selection in all three countries under the same search criteria. There were made two research sets of the companies in each country. One set covers top turnover product innovation oriented companies, second set avoided product innovation orientation search criteria and covers top companies by turnover in the respective country. Each particular sample set covered 74 to 100 companies.Activities of the selected companies on Facebook, YouTube, Twitter, Google+ and LinkedIn were manually scanned and particular metrics were scaled. Microsoft Excel was used for storing, statistical processing and graphic outputs of the research. Evaluated results show significant gaps in use of social media communication tools in Czech and Slovak companies comparing to Swiss benchmark. It has been also confirmed that social media communication activity in product innovation oriented companies is equal to other companies. The hypotheses were statistically tested and results confirmed.

Investigating the influence of product perception and geometric features

DEFF Research Database (Denmark)

Perez Mata, Marta; Ahmed-Kristensen, Saeema; Brockhoff, Per B.

2017-01-01

. Surveys were conducted with 71 participants to gather their perceptions of 11 vase concepts. Advanced statistical analyses, including mixed models, were applied to allow generalisation of the results beyond the data sample. Significant relations between the desire to own a product and how the product......Research in emotional design and Kansei Engineering has shown that aesthetics play a significant role in the appeal of a product. This paper contributes to establishing a methodology to identify the relationships between perceptions, aesthetic features, desire to own and background of consumers...... and was simple and tall). An automated mixed model analysis was conducted and revealed that general rules can be found between aesthetic features, perceptions and ownership, which can apply across gender and culture. The findings include design rules that link aesthetic features with perceptions...

Feature-Oriented Programming with Object Algebras

NARCIS (Netherlands)

B.C.d.S. Oliveira (Bruno); T. van der Storm (Tijs); A. Loh; W.R. Cook

2013-01-01

htmlabstractObject algebras are a new programming technique that enables a simple solution to basic extensibility and modularity issues in programming languages. While object algebras excel at defining modular features, the composition mechanisms for object algebras (and features) are still

Improving market oriented product development in Danish food companies

DEFF Research Database (Denmark)

Harmsen, Hanne

1994-01-01

One of the factors that has been strongly associated with successful new product development is a profound knwledge of customers' needs and wants as well as the ability to transform this knowledge into specific product characteristics and benefits there is a general agreement on the importance of......-processing companies. Preliminary results show that the companies have improved their market orientation, but also that the change pro has been difficult and time-consuming and improvements rather incremental.......One of the factors that has been strongly associated with successful new product development is a profound knwledge of customers' needs and wants as well as the ability to transform this knowledge into specific product characteristics and benefits there is a general agreement on the importance...

[The characters and specific features of new human embryonic stem cells lines].

Science.gov (United States)

Krylova, T A; Kol'tsova, A M; Zenin, V V; Gordeeva, O F; Musorina, A S; Goriachaia, T S; Shlykova, S A; Kamenetskaia, Iu K; Pinaev, G P; Polianskaia, G G

2009-01-01

Four continuous human embryonic stem cell lines (SC1, SC2, SC3 and SC4), derived from the blastocysts has been described. The cell lines were cultivated on mitotically inactivated human feeder cells. The cell lines SC1 and SC2 have passed through 150 population doublings and the cell lines SC3 and SC4 -- near 120 populations doublings, which exceeds Hayflick limit sufficiently. These cell lines maintain high activity of alkaline phosphatase, expression of transcription factor OCT-4 and cell surface antigens (SSEA-4, TRA-1-60 and TRA-1-81), confirming their ESC status and human specificity. Immunofluorescent detection of antigens, characteristic of ectoderm, endoderm and mesoderm confirms the ability of these cells to retain their pluripotency under in vitro condition. PCR analysis revealed expression of six genes specific for pluripotent cells (OCT-4, NANOG, DPPA3/STELLA, TDGF/CRIPTO and LEFTYA). Correlation between the level of proliferative activity and the character of DNA-bound fluorescent staining was found. Fluorescent dyes, Hoechst 33342 and PI, produced diffuse staining of the nuclei in slowly proliferating cells of the SC1 and SC2 lines. In contrast, in actively proliferating cells of the SC3 and SC4 lines, the clear staining of the nuclei was observed. Upon changing the cultivation condition, proliferative activity of SC3 and SC4 lines decreased and became similar to that of SC1 and SC2 lines. The character of the fluorescent staining of all these lines was also shown to be similar. These results show that quality of the fluorescent staining with Hoechst 33342 and PI reflects the level of proliferation. Possible causes and mechanisms of this feature of human ESC are discussed.

Critical Product Features' Identification Using an Opinion Analyzer

Science.gov (United States)

Shamim, Azra; Balakrishnan, Vimala

2014-01-01

The increasing use and ubiquity of the Internet facilitate dissemination of word-of-mouth through blogs, online forums, newsgroups, and consumer's reviews. Online consumer's reviews present tremendous opportunities and challenges for consumers and marketers. One of the challenges is to develop interactive marketing practices for making connections with target consumers that capitalize consumer-to-consumer communications for generating product adoption. Opinion mining is employed in marketing to help consumers and enterprises in the analysis of online consumers' reviews by highlighting the strengths and weaknesses of the products. This paper describes an opinion mining system based on novel review and feature ranking methods to empower consumers and enterprises for identifying critical product features from enormous consumers' reviews. Consumers and business analysts are the main target group for the proposed system who want to explore consumers' feedback for determining purchase decisions and enterprise strategies. We evaluate the proposed system on real dataset. Results show that integration of review and feature-ranking methods improves the decision making processes significantly. PMID:25506612

The Bochum on-line data acquisition system

International Nuclear Information System (INIS)

Paul, H.J.; Freiesleben, H.

1986-01-01

We describe an on-line data acquisition system based on a PDP 11 computer with CAMAC hardware. The software fully exploits the real-time features of the RSX-11M operating system. The basic characteristics of the program package, mainly written in FORTRAN 77, are: multitasking, shared common blocks, dynamical access to CAMAC hardware and data, and command orientated user interface. The system is particularly tailored for data acquisition in list mode of up to 64 parameters. (orig.)

Visuospatial performance on an internet line judgment task and potential hormonal markers: sex, sexual orientation, and 2D:4D.

Science.gov (United States)

Collaer, Marcia L; Reimers, Stian; Manning, John T

2007-04-01

We investigated whether performance on a visuospatial line judgment task, the Judgment of Line Angle and Position-15 test (JLAP-15), showed evidence of sensitivity to early sex steroid exposure by examining how it related to sex, as well as to sexual orientation and 2D:4D digit ratios. Participants were drawn from a large Internet study with over 250,000 participants. In the main sample (ages 12-58 years), males outperformed females on the JLAP-15, showing a moderate effect size for sex. In agreement with a prenatal sex hormone hypothesis, line judgment accuracy in adults related to 2D:4D and sexual orientation, both of which are postulated to be influenced by early steroids. In both sexes, better visuospatial performance was associated with lower (more male-typical) digit ratios. For men, heterosexual participants outperformed homosexual/bisexual participants on the JLAP-15 and, for women, homosexual/bisexual participants outperformed heterosexual participants. In children aged 8-10 years, presumed to be a largely prepubertal group, boys also outperformed girls. These findings are consistent with the hypothesis that visuospatial ability is influenced by early sex steroids, although they do not rule out alternative explanations or additional influences. More broadly, such results support a prenatal sex hormone hypothesis that degree of androgen exposure may influence the neural circuitry underlying cognition (visuospatial ability) and sexual orientation as well as aspects of somatic (digit ratio) development.

Classification and calculation of primary failure modes in bread production line

International Nuclear Information System (INIS)

Tsarouhas, Panagiotis H.

2009-01-01

In this study, we describe the classification methodology over a 2-year period of the primary failure modes in categories based on failure data of bread production line. We estimate the probabilities of these categories applying the chi-square goodness of fit test, and we calculate their joint probabilities of mass function at workstation and line level. Then, we present numerical examples in order to predict the causes and frequencies of breakdowns for workstations and for the entire bread production line that will occur in the future. The methodology is meant to guide bread and bakery product manufacturers, improving the operation of the production lines. It can also be a useful tool to maintenance engineers, who wish to analyze and improve the reliability and efficiency of the manufacturing systems

The on-line low temperature nuclear orientation facility NICOLE

International Nuclear Information System (INIS)

Ohtsubo, T; Roccia, S; Gaulard, C; Stone, N J; Stone, J R; Köster, U; Nikolov, J; Veskovic, M; Simpson, G S

2017-01-01

We review major experiments and results obtained by the on-line low temperature nuclear orientation method at the NICOLE facility at ISOLDE, CERN since the year 2000 and highlight their general physical impact. This versatile facility, providing a large degree of controlled nuclear polarization, was used for a long-standing study of magnetic moments at shell closures in the region Z  = 28, N  = 28–50 but also for dedicated studies in the deformed region around A  ∼ 180. Another physics program was conducted to test symmetry in the weak sector and constrain weak coupling beyond V–A . Those two programs were supported by careful measurements of the involved solid state physics parameters to attain the full sensitivity of the technique and provide interesting interdisciplinary results. Future plans for this facility include the challenging idea of measuring the beta–gamma–neutron angular distributions from polarized beta delayed neutron emitters, further test of fundamental symmetries and obtaining nuclear structure data used in medical applications. The facility will also continue to contribute to both the nuclear structure and fundamental symmetry test programs. (paper)

Bucket Brigades to Increase Productivity in a Luxury Assembly Line

OpenAIRE

Carlo, Filippo De; Borgia, Orlando; Tucci, Mario

2013-01-01

One of the most challenging issues in manual assembly lines is to achieve the best balance of workloads. There are many analytic approaches to solve this problem, but they are often neglected, since they are time-consuming and require high level engineering skills. Fashion bags packaging lines must comply with a number of different products with low production volumes, while the organization of the line is often under the mere responsibility of the foreman, who balances workloads in an empiri...

Position and orientation tracking system

International Nuclear Information System (INIS)

Burks, B.L.; DePiero, F.W.; Armstrong, G.A.; Jansen, J.F.; Muller, R.C.; Gee, T.F.

1998-01-01

A position and orientation tracking system presents a laser scanning apparatus having two measurement pods, a control station, and a detector array. The measurement pods can be mounted in the dome of a radioactive waste storage silo. Each measurement pod includes dual orthogonal laser scanner subsystems. The first laser scanner subsystem is oriented to emit a first line laser in the pan direction. The second laser scanner is oriented to emit a second line laser in the tilt direction. Both emitted line lasers scan planes across the radioactive waste surface to encounter the detector array mounted on a target robotic vehicle. The angles of incidence of the planes with the detector array are recorded by the control station. Combining measurements describing each of the four planes provides data for a closed form solution of the algebraic transform describing the position and orientation of the target robotic vehicle. 14 figs

A Value-Based Business Approach to Product Line Software Engineering

Directory of Open Access Journals (Sweden)

Raman K. Agrawalla

2009-08-01

Full Text Available The present conceptual paper is an attempt to provide a Value-Based Business Approach (VBBA to product line software engineering. It argues that Product line software engineering should be seen as a system and considered as a means towards the end of appropriating more and more value for the business firm; contingent upon the fact that it provides value to customer and customer's customers operating its value creating system with agility, speed, economy and innovation; getting governed by the positive sum value creation outlook and guided by value- based management. With our value-based business triad, the product line engineering process can hope to achieve simultaneously value, variety and volume, product differentiation and cost leadership enabling the business firm to land on the virtuous value spiral.

The Influences of Designing for Services in Product Design Oriented Organisations

DEFF Research Database (Denmark)

Akoglu, Canan

2017-01-01

As the service sector has become a crucial part of the economy, addressing service design by investigating the role of designers, design process, and tools and methods has a powerful potential to contribute to the professional needs, the industry, and also academic research. The increase of service...... sector in industrialized economies, the shift from manufacturing industries to service industries and the penetration of information and communication technologies especially in daily life have taken attraction to service design and product design oriented organisations cannot stay away from...... this powerful change. From this perspective, this paper aims to show how designing for services has (potential) influence in product design oriented organisations. The empirical part of this research, 12 in-depth face-to-face interviews were conducted with design practitioners who have several years...

Voluntary Tools Of The Environmental Oriented Product Policy

Directory of Open Access Journals (Sweden)

Rusko Miroslav

2015-06-01

Full Text Available Environmentally oriented product policy is in general determined by the relationships between its aims – subjects – objects - tools. It is based on the integrated approach to the product life cycle, which anticipates an enormous amount of information. It has to solve the questions of the international trade as well as the rules of the International Trade Organization. New forms of preventive environmental strategies and especially Green Marketing are being introduced helping to solve environmental problems and environmental motivation of producers. Many producers face great attention of the public regarding their approach to the environment. Despite the fact that the customers buy products fairly prudently and their behaviour is markedly affected by prices, a particular part of the population prefers the products that do not burden the environment. This brings about a situation, in which the producers within their mutual competition and in relation to customers are enforced to behave responsibly.

Simulation-based comparisons of four apparel cell production modes of one clothing production line

Directory of Open Access Journals (Sweden)

Guoqiang Pan

2014-10-01

Full Text Available Purpose: This research, by using the SIMIO simulation platform, provides a quantitative and comparative analysis of how the efficiency of four different cell production modes is affected. It is hoped that the outcomes will be of some help for garment factories to optimize their production lines. Design/methodology/approach: The SIMIO simulation platform was employed in the research and comparisons were made of the simulation test results about the four different production modes. Findings: The operation mode, number of operators, and number of buffer areas are key factors affecting the production line efficiency, and need to be reasonably set to achieve the highest efficiency. Originality/value: As most research literature so far is qualitative, this research provided a simulation-based quantitative analysis of the production efficiency under different cell production modes.

A Product Line Analysis for Eco-Designed Fashion Products: Evidence from an Outdoor Sportswear Brand

OpenAIRE

Luo Wang; Bin Shen

2017-01-01

With the increasing awareness of sustainability, eco-design has been an important trend in the fashion industry. Many fashion brands such as Nike, Adidas, and The North Face have developed sustainable fashion by incorporating eco-design elements. Eco-design is an important part of sustainable supply chains. In this paper, we conducted a product line analysis of eco-designed products from a famous outdoor sportswear brand, Patagonia. We collected Patagonia’s 2017 Spring Season product line dat...

Customized Pull Systems for Single-Product Flow Lines

NARCIS (Netherlands)

Gaury, E.G.A.; Kleijnen, J.P.C.; Pierreval, H.

1998-01-01

Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage

A Product Line Analysis for Eco-Designed Fashion Products: Evidence from an Outdoor Sportswear Brand

Directory of Open Access Journals (Sweden)

Luo Wang

2017-07-01

Full Text Available With the increasing awareness of sustainability, eco-design has been an important trend in the fashion industry. Many fashion brands such as Nike, Adidas, and The North Face have developed sustainable fashion by incorporating eco-design elements. Eco-design is an important part of sustainable supply chains. In this paper, we conducted a product line analysis of eco-designed products from a famous outdoor sportswear brand, Patagonia. We collected Patagonia’s 2017 Spring Season product line data and analyzed the data through descriptive analysis, factor analysis and correlation analysis. We found that Patagonia mainly uses organic, recycled, and traceable materials in their eco-product line development. We identified that the usage of eco-materials may significantly affect the number of color choices and product weight as well as gender difference, pattern design, product fit and online reviewers’ opinions at Patagonia. We argued that Patagonia should focus on functionality more than aesthetics in eco-design. We discussed how sustainable fashion firms should manage eco-design in the supply chain.

FEDERAL USERS CONFERENCE PRODUCT LINE TOOL SET (PLTS) MAP PRODUCTION SYSTEM (MPS) ATLAS CUSTOM GRIDS [Rev 0 was draft

Energy Technology Data Exchange (ETDEWEB)

HAYENGA, J.L.

2006-12-19

Maps, and more importantly Atlases, are assisting the user community in managing a large land area with complex issues, the most complex of which is the management of nuclear waste. The techniques and experiences discussed herein were gained while developing several atlases for use at the US Department of Energy's Hanford Site. The user community requires the ability to locate not only waste sites, but other features as well. Finding a specific waste site on a map and in the field is a difficult task at a site the size of Hanford. To find a specific waste site, the user begins by locating the item or object in an index, then locating the feature on the corresponding map within an atlas. Locating features requires a method for indexing them. The location index and how to place it on a map or atlas is the central theme presented in this article. The user requirements for atlases forced the design team to develop new and innovative solutions for requirements that Product Line Tool Set (PLTS) Map Production System (MPS)-Atlas was not designed to handle. The layout of the most complex atlases includes custom reference grids, multiple data frames, multiple map series, and up to 250 maps. All of these functional requirements are at the extreme edge of the capabilities of PLTS MPS-Atlas. This document outlines the setup of an atlas using PLTS MPS-Atlas to meet these requirements.

FEDERAL USERS CONFERENCE PRODUCT LINE TOOL SET (PLTS) MAP PRODUCTION SYSTEM (MPS) ATLAS CUSTOM GRIDS [Rev 0 was draft

International Nuclear Information System (INIS)

HAYENGA, J.L.

2006-01-01

Maps, and more importantly Atlases, are assisting the user community in managing a large land area with complex issues, the most complex of which is the management of nuclear waste. The techniques and experiences discussed herein were gained while developing several atlases for use at the US Department of Energy's Hanford Site. The user community requires the ability to locate not only waste sites, but other features as well. Finding a specific waste site on a map and in the field is a difficult task at a site the size of Hanford. To find a specific waste site, the user begins by locating the item or object in an index, then locating the feature on the corresponding map within an atlas. Locating features requires a method for indexing them. The location index and how to place it on a map or atlas is the central theme presented in this article. The user requirements for atlases forced the design team to develop new and innovative solutions for requirements that Product Line Tool Set (PLTS) Map Production System (MPS)-Atlas was not designed to handle. The layout of the most complex atlases includes custom reference grids, multiple data frames, multiple map series, and up to 250 maps. All of these functional requirements are at the extreme edge of the capabilities of PLTS MPS-Atlas. This document outlines the setup of an atlas using PLTS MPS-Atlas to meet these requirements

Optical polarimetry and molecular line studies of L1157 dark molecular cloud

Science.gov (United States)

Sharma, Ekta; Soam, Archana; Gopinathan, Maheswar

2018-04-01

Filaments are omnipresent in molecular clouds which are believed to fragment into cores. The detailed process of the evolution from filaments to cores depends critically on the physical conditions in the star forming region. This study aims at characterising gas motions using velocity structure and finding the dynamical importance of magnetic fields in the filament morphology. The plane-of-the-sky component of the magnetic field has been measured using optical polarization of the background stars. The orientation is found to be almost perpendicular to the filament implying its dynamical importance in the evolution of the cloud. Optical polarimetric results match very well with the sub millimetre polarization angles obtained in the inner core regions. The magnetic fields are found to have an orientation of 130° east with respect to north. The angular offset between the outflow axis and the magnetic field direction is found to be 25°. Values for parameters like the excitation temperature, optical depth and column densities have been derived using molecular lines. Optically thick lines show non-gaussian features. The non-thermal widths tell about the presence of turbulent motions whereas the C180 lines follow Gaussian features almost at all the locations observed in the filament.

Re-orientating time in product design : a phenomenology-inspired perspective

NARCIS (Netherlands)

Stienstra, J.T.; Hengeveld, B.J.; Hummels, C.C.M.

2015-01-01

This paper presents a work in progress design case that is used to exemplify how a phenomenology-inspired perspective on time can impact the design of highly interactive systems and products. The design presents a calendar with a re-orientated layout that is based on a bodily relationship with time,

Product-line administration: a framework for redefining medical record department services.

Science.gov (United States)

Postal, S N

1990-06-01

Product-line administration is a viable approach for managing medical records services in an environment that demands high quantity and quality service levels. Product-line administration directs medical record department team members to look outside of the department and seek input from the customers it is intended to serve. The feedback received may be alarming at first, as the current state of products usually reveals a true lack of customer input. As the planning, defining, managing, and marketing phases are implemented, the road will not be easy and rewards will be slow to come. Product-line administration does not provide quick fixes, but it does provide long-term problem resolution as products are refined and new products developed to meet customer needs and expectations. In addition to better meeting the needs of the department's external customers, the department's internal customers' needs and expectations will be addressed. The participative management approach will help nurture each team member's creativity. The team members will have the opportunity to reach their full potential while reaping the rewards and benefits of providing products and services that meet the needs and expectations of all department customers. The future of the health care industry promises more changes as the country moves toward some form of prospective payment in the ambulatory setting. Reactive management and the constant struggle to catch up can no longer be accepted as a management approach. It is imperative that the medical record department be viewed as a business with product lines composed of quality products. The planning, defining, managing, and marketing components of product-line administration afford responsiveness to the current situation and the development of quality products that will ensure that medical record departments are prepared for the future.

Document localization algorithms based on feature points and straight lines

Science.gov (United States)

Skoryukina, Natalya; Shemiakina, Julia; Arlazarov, Vladimir L.; Faradjev, Igor

2018-04-01

The important part of the system of a planar rectangular object analysis is the localization: the estimation of projective transform from template image of an object to its photograph. The system also includes such subsystems as the selection and recognition of text fields, the usage of contexts etc. In this paper three localization algorithms are described. All algorithms use feature points and two of them also analyze near-horizontal and near- vertical lines on the photograph. The algorithms and their combinations are tested on a dataset of real document photographs. Also the method of localization quality estimation is proposed that allows configuring the localization subsystem independently of the other subsystems quality.

Product-line selection and pricing with remanufacturing under availability constraints

Science.gov (United States)

Aras, Necati; Esenduran, G.÷k.‡e.; Altinel, I. Kuban

2004-12-01

Product line selection and pricing are two crucial decisions for the profitability of a manufacturing firm. Remanufacturing, on the other hand, may be a profitable strategy that captures the remaining value in used products. In this paper we develop a mixed-integer nonlinear programming model form the perspective of an original equipment manufacturer (OEM). The objective of the OEM is to select products to manufacture and remanufacture among a set of given alternatives and simultaneously determine their prices so as to maximize its profit. It is assumed that the probability a customer selects a product is proportional to its utility and inversely proportional to its price. The utility of a product is an increasing function of its perceived quality. In our base model, products are discriminated by their unit production costs and utilities. We also analyze a case where remanufacturing is limited by the available quantity of collected remanufacturable products. We show that the resulting problem is decomposed into the pricing and product line selection subproblems. Pricing problem is solved by a variant of the simplex search procedure which can also handle constraints, while complete enumeration and a genetic algorithm are used for the solution of the product line selection problem. A number of experiments are carried out to identify conditions under which it is economically viable for the firm to sell remanufactured products. We also determine the optimal utility and unit production cost values of a remanufactured product, which maximizes the total profit of the OEM.

Advances in Mammalian Cell Line Development Technologies for Recombinant Protein Production

Directory of Open Access Journals (Sweden)

Say Kong Ng

2013-04-01

Full Text Available From 2006 to 2011, an average of 15 novel recombinant protein therapeutics have been approved by US Food and Drug Administration (FDA annually. In addition, the expiration of blockbuster biologics has also spurred the emergence of biosimilars. The increasing numbers of innovator biologic products and biosimilars have thus fuelled the demand of production cell lines with high productivity. Currently, mammalian cell line development technologies used by most biopharmaceutical companies are based on either the methotrexate (MTX amplification technology or the glutamine synthetase (GS system. With both systems, the cell clones obtained are highly heterogeneous, as a result of random genome integration by the gene of interest and the gene amplification process. Consequently, large numbers of cell clones have to be screened to identify rare stable high producer cell clones. As such, the cell line development process typically requires 6 to 12 months and is a time, capital and labour intensive process. This article reviews established advances in protein expression and clone screening which are the core technologies in mammalian cell line development. Advancements in these component technologies are vital to improve the speed and efficiency of generating robust and highly productive cell line for large scale production of protein therapeutics.

Featureous: an Integrated Approach to Location, Analysis and Modularization of Features in Java Applications

DEFF Research Database (Denmark)

Olszak, Andrzej

, it is essential that features are properly modularized within the structural organization of software systems. Nevertheless, in many object-oriented applications, features are not represented explicitly. Consequently, features typically end up scattered and tangled over multiple source code units......, such as architectural layers, packages and classes. This lack of modularization is known to make application features difficult to locate, to comprehend and to modify in isolation from one another. To overcome these problems, this thesis proposes Featureous, a novel approach to location, analysis and modularization...... quantitative and qualitative results suggest that Featureous succeeds at efficiently locating features in unfamiliar codebases, at aiding feature-oriented comprehension and modification, and at improving modularization of features using Java packages....

Sexual Orientation as a Peripheral Cue in Advertising: Effects of Models' Sexual Orientation, Argument Strength, and Involvement on Responses to Magazine Ads.

Science.gov (United States)

Ivory, Adrienne Holz

2017-10-12

This study examines how sexual orientation of couples featured in magazine advertisements affects heterosexual viewers' responses using the elaboration likelihood model as a framework. A 3 × 2 × 2 × 3 experiment tested effects of sexual orientation, argument strength, involvement, and attitudes toward homosexuality on heterosexuals' attitudes toward the couple, advertisement, brand, and product, purchase intentions, and recall. Results indicate that consumers were accepting of ads with lesbian portrayals. Participants showed more negative attitudes toward gay male portrayals, but attitudes toward heterosexual and lesbian ads were similar. This effect was moderated by participants' attitudes toward homosexuals. Low-involvement consumers showed more negative attitudes toward homosexual portrayals than toward heterosexual portrayals, indicating that sexual orientation may have served as a peripheral cue negatively impacting attitudes toward the couple and ad under low elaboration. These effects were not observed for attitudes toward the brand and product, purchase intentions, or recall.

Three-dimensional visual feature representation in the primary visual cortex.

Science.gov (United States)

Tanaka, Shigeru; Moon, Chan-Hong; Fukuda, Mitsuhiro; Kim, Seong-Gi

2011-12-01

In the cat primary visual cortex, it is accepted that neurons optimally responding to similar stimulus orientations are clustered in a column extending from the superficial to deep layers. The cerebral cortex is, however, folded inside a skull, which makes gyri and fundi. The primary visual area of cats, area 17, is located on the fold of the cortex called the lateral gyrus. These facts raise the question of how to reconcile the tangential arrangement of the orientation columns with the curvature of the gyrus. In the present study, we show a possible configuration of feature representation in the visual cortex using a three-dimensional (3D) self-organization model. We took into account preferred orientation, preferred direction, ocular dominance and retinotopy, assuming isotropic interaction. We performed computer simulation only in the middle layer at the beginning and expanded the range of simulation gradually to other layers, which was found to be a unique method in the present model for obtaining orientation columns spanning all the layers in the flat cortex. Vertical columns of preferred orientations were found in the flat parts of the model cortex. On the other hand, in the curved parts, preferred orientations were represented in wedge-like columns rather than straight columns, and preferred directions were frequently reversed in the deeper layers. Singularities associated with orientation representation appeared as warped lines in the 3D model cortex. Direction reversal appeared on the sheets that were delimited by orientation-singularity lines. These structures emerged from the balance between periodic arrangements of preferred orientations and vertical alignment of the same orientations. Our theoretical predictions about orientation representation were confirmed by multi-slice, high-resolution functional MRI in the cat visual cortex. We obtained a close agreement between theoretical predictions and experimental observations. The present study throws a

Introducing Product Lines through Open Source Tools

OpenAIRE

Haugen, Øystein

2008-01-01

We present an approach to introducing product lines to companies that lower their initial risk by applying open source tools and a smooth learning curve into the use and creation of domain specific modeling combined with standardized variability modeling.

Beyond the line: exploring the HRM responsibilities of line managers, project managers and the HRM department in four project-oriented companies in the Netherlands, Austria, the UK and the USA

NARCIS (Netherlands)

Keegan, A.; Huemann, M.; Turner, J.R.

2012-01-01

The topic of what human resource management (HRM) responsibilities are devolved from the HRM department to line managers has attracted much interest in recent years. We report findings from a study on the devolution of HRM practices in four project-oriented companies (POCs) and argue that although

Product-oriented design theory for digital information services: A literature review.

NARCIS (Netherlands)

Wijnhoven, Alphonsus B.J.M.; Kraaijenbrink, Jeroen

2008-01-01

Purpose – The purpose of this paper is to give a structured literature review, design concepts, and research propositions related to a product-oriented design theory for information services. Information services facilitate the exchange of information goods with or without transforming these goods.

Survey of Mathematics and Science Requirements for Production-Oriented Agronomy Majors.

Science.gov (United States)

Aide, Michael; Terry, Danny

1996-01-01

Analyzes course requirements to determine the amount of required mathematics and science for production-oriented agronomy majors. Reports that mathematics requirements center around college algebra and statistics; science requirements generally include chemistry, biology, plant physiology, and genetics; and land-grant institutions have a…

Production and Reliability Oriented SOFC Cell and Stack Design

DEFF Research Database (Denmark)

Hauth, Martin; Lawlor, Vincent; Cartellieri, Peter

2017-01-01

The paper presents an innovative development methodology for a production and reliability oriented SOFC cell and stack design aiming at improving the stacks robustness, manufacturability, efficiency and cost. Multi-physics models allowed a probabilistic approach to consider statistical variations...... in production, material and operating parameters for the optimization phase. A methodology for 3D description of spatial distribution of material properties based on a random field models was developed and validated by experiments. Homogenized material models on multiple levels of the SOFC stack were...... and output parameters and to perform a sensitivity analysis were developed and implemented. The capabilities of the methodology is illustrated on two practical cases....

Linking culture, organizational, learning orientation and product innovation performance: the case of Ethiopian manufacturing firms

Directory of Open Access Journals (Sweden)

Beyene, K. T.

2016-05-01

Full Text Available Using formal survey data from textile and leather product manufacturing firms in Ethiopia, we investigate how the current national cultural setup (power distance, collectivism, masculinity and uncertainty avoidance is affecting organizational learning, orientation and product innovation performance. Further, we assess the moderating role of sector and ownership structure on the interrelationship. The result demonstrates that the current national culture setup is negatively affecting the learning and innovation activities of the firms in the country. It also shows that while sector type is neutral, ownership type significantly affects the interrelationship among culture, learning orientation and product innovation performance.

Spa Products as Main Orientation in Wellness Tourism in Bali

Directory of Open Access Journals (Sweden)

I Gusti Made Wendri

2018-03-01

Full Text Available Wellness Spa is developed from conventional spa in response to the influence of the present tourism trend which is much in demand of the achievement of wellness aspect of life. Wellness tourism is a subdivision of health tourism. Wellness spa is the core product for wellness tourism. In fact, to date, people’s knowledge about wellness spa is still poor. This fact has motivated the implementation of this research under the title “Spa Products as Main Orientation in Wellness Tourism in Bali”. The objective of the research is to find out what products becomes the orientation in wellness tourism in Ubud as well as in South Badung. This qualitative research uses a phenomenological approach to the study. The determination of the informants is purposively done, and the information concerning the object of the research is obtained by deep interview controlled by a checklist based on Wellness Wheel concept. The location of the research is Ubud and South Badung areas, the latter represented by Nusa Dua, Jimbaran, and Kuta. The research uses 10 informants, 5 from Ubud and 5 from South Badung. The informants include spa managers and spa therapists. The result of the research shows that such packages as Bali spa ritual package, personal growth, and eco-adventure package become the most attractive products offered by wellness tourism industry and enjoyed by the tourists for the fulfilment of the tourists' wellness needs.

Vehicle Color Recognition with Vehicle-Color Saliency Detection and Dual-Orientational Dimensionality Reduction of CNN Deep Features

Science.gov (United States)

Zhang, Qiang; Li, Jiafeng; Zhuo, Li; Zhang, Hui; Li, Xiaoguang

2017-12-01

Color is one of the most stable attributes of vehicles and often used as a valuable cue in some important applications. Various complex environmental factors, such as illumination, weather, noise and etc., result in the visual characteristics of the vehicle color being obvious diversity. Vehicle color recognition in complex environments has been a challenging task. The state-of-the-arts methods roughly take the whole image for color recognition, but many parts of the images such as car windows; wheels and background contain no color information, which will have negative impact on the recognition accuracy. In this paper, a novel vehicle color recognition method using local vehicle-color saliency detection and dual-orientational dimensionality reduction of convolutional neural network (CNN) deep features has been proposed. The novelty of the proposed method includes two parts: (1) a local vehicle-color saliency detection method has been proposed to determine the vehicle color region of the vehicle image and exclude the influence of non-color regions on the recognition accuracy; (2) dual-orientational dimensionality reduction strategy has been designed to greatly reduce the dimensionality of deep features that are learnt from CNN, which will greatly mitigate the storage and computational burden of the subsequent processing, while improving the recognition accuracy. Furthermore, linear support vector machine is adopted as the classifier to train the dimensionality reduced features to obtain the recognition model. The experimental results on public dataset demonstrate that the proposed method can achieve superior recognition performance over the state-of-the-arts methods.

Grain product of 34 soya mutant lines

International Nuclear Information System (INIS)

Salmeron E, J.; Mastache L, A. A.; Valencia E, F.; Diaz V, G. E.; Cervantes S, T.; De la Cruz T, E.; Garcia A, J. M.; Falcon B, T.; Gatica T, M. A.

2009-01-01

This work was development with the objective of obtaining information of the agronomic behavior of 34 soya mutant lines (R 4 M 18 ) for human consumption and this way to select the 2 better lines. The genetic materials were obtained starting from the variety ISAAEG-B M2 by means of the application of recurrent radiation with Co 60 gammas, to a dose of 350 Gray for the first two generations and both later to 200 Gray and selection during 17 cycles, being obtained the 34 better lines mutants with agronomic characteristic wanted and good flavor. The obtained results were that the mutant lines L 25 and L 32 produced the major quantity in branches/plant number with 7.5 and 7.25, pods/plant number with 171.25 and 167, grains/plant number with 350.89 and 333.07 and grain product (ton/ha) to 15% of humidity 5.15 and 4.68 ton/ha, respectively. (Author)

Orientational dynamics and energy landscape features of ...

Indian Academy of Sciences (India)

WINTEC

Energy landscape analysis of inherent structures shows that the ... to be strikingly similar to that of supercooled molecular liquids5 .... where eiα is the α-component (in the space-fixed frame) of the unit orientation vector ei along the principal symmetry axis of the ith ellipsoid of revo- ..... understand pathways of protein folding.

Optimization and Improvement of Test Processes on a Production Line

Science.gov (United States)

Sujová, Erika; Čierna, Helena

2018-06-01

The paper deals with increasing processes efficiency at a production line of cylinder heads of engines in a production company operating in the automotive industry. The goal is to achieve improvement and optimization of test processes on a production line. It analyzes options for improving capacity, availability and productivity of processes of an output test by using modern technology available on the market. We have focused on analysis of operation times before and after optimization of test processes at specific production sections. By analyzing measured results we have determined differences in time before and after improvement of the process. We have determined a coefficient of efficiency OEE and by comparing outputs we have confirmed real improvement of the process of the output test of cylinder heads.

Side-Scan Sonar Image Mosaic Using Couple Feature Points with Constraint of Track Line Positions

Directory of Open Access Journals (Sweden)

Jianhu Zhao

2018-06-01

Full Text Available To obtain large-scale seabed surface image, this paper proposes a side-scan sonar (SSS image mosaic method using couple feature points (CFPs with constraint of track line positions. The SSS geocoded images are firstly used to form a coarsely mosaicked one and the overlapping areas between adjacent strip images can be determined based on geographic information. Inside the overlapping areas, the feature point (FP detection and registration operation are adopted for both strips. According to the detected CFPs and track line positions, an adjustment model is established to accommodate complex local distortions as well as ensure the global stability. This proposed method effectively solves the problem of target ghosting or dislocation and no accumulated errors arise in the mosaicking process. Experimental results show that the finally mosaicked image correctly reflects the object distribution, which is meaningful for understanding and interpreting seabed topography.

Numerical simulation of mesoscale surface pressure features with trailing stratiform squall lines using WRF -ARW model over Gangetic West Bengal region

Science.gov (United States)

Dawn, Soma; Satyanarayana, A. N. V.

2018-01-01

In the present study, an attempt has been made to investigate the simulation of mesoscale surface pressure patterns like pre-squall mesolow, mesohigh and wake low associated with leading convective line-trailing stratiform (TS) squall lines over Gangetic West Bengal (GWB). For this purpose, a two way interactive triple nested domain with high resolution WRF model having2 km grid length in the innermost domain is used. The model simulated results are compared with the available in-situ observations obtained as a part of Severe Thunderstorm: Observations and Regional Modeling (STORM) programme, reflectivity products of Doppler Weather Radar (DWR) Kolkata and TRMM rainfall. Three TS squall lines (15 May 2009, 5 May 2010 and 7 May 2010) are chosen during pre-monsoon thunderstorm season for this study. The model simulated results of diurnal variation of temperature, relative humidity, wind speed and direction at the station Kharagpur in GWB region reveal a sudden fall in temperature, increase in the amount of relative humidity and sudden rise in wind speed during the arrival of the storms. Such results are well comparable with the observations though there are some leading or lagging of time in respect of actual occurrences of such events. The study indicates that the model is able to predict the occurrences of three typical surface pressure features namely: pre-squall mesolow, meso high and wake low. The predicted surface parameters like accumulated rainfall, maximum reflectivity and vertical profiles (temperature, relative humidity and winds) are well accorded with the observations. The convective and stratiform precipitation region of the TS squall lines are well represented by the model. A strong downdraft is observed to be a contributory factor for formation of mesohigh in the convective region of the squall line. Wake low is observed to reside in the stratiform rain region and the descending dry air at this place has triggered the wake low through adiabatic

Intraprocedural dataflow analysis for software product lines

DEFF Research Database (Denmark)

Brabrand, Claus; Ribeiro, Márcio; Tolêdo, Társis

2013-01-01

Software product lines (SPLs) developed using annotative approaches such as conditional compilation come with an inherent risk of constructing erroneous products. For this reason, it is essential to be able to analyze such SPLs. However, as dataflow analysis techniques are not able to deal with SP...... and memory characteristics on five qualitatively different SPLs. On our benchmarks, the combined analysis strategy is up to almost eight times faster than the brute-force approach....

40 CFR 1045.305 - How must I prepare and test my production-line engines?

Science.gov (United States)

2010-07-01

... production-line engines? 1045.305 Section 1045.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Testing Production-line Engines § 1045.305 How must I prepare and test my production-line engines...

40 CFR 1048.305 - How must I prepare and test my production-line engines?

Science.gov (United States)

2010-07-01

... production-line engines? 1048.305 Section 1048.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.305 How must I prepare and test my production-line engines? This...

Modulations of the processing of line discontinuities under selective attention conditions?

Science.gov (United States)

Giersch, Anne; Fahle, Manfred

2002-01-01

We examined whether the processing of discontinuities involved in figure-ground segmentation, like line ends, can be modulated under selective attention conditions. Subjects decided whether a gap in collinear or parallel lines was located to the right or left. Two stimuli were displayed in immediate succession. When the gaps were on the same side, reaction times (RTs) for the second stimulus increased when collinear lines followed parallel lines, or the reverse, but only when the two stimuli shared the same orientation and location. The effect did not depend on the global form of the stimuli or on the relative orientation of the gaps. A frame drawn around collinear elements affected the results, suggesting a crucial role of the "amodal" orthogonal lines produced when line ends are aligned. Including several gaps in the first stimulus also eliminated RT variations. By contrast, RT variations remained stable across several experimental blocks and were significant for interstimulus intervals from 50 to 600 msec between the two stimuli. These results are interpreted in terms of a modulation of the processing of line ends or the production of amodal lines, arising when attention is selectively drawn to a gap.

The recommendation of line-balancing improvement on MCM product line 1 using genetics algorithm and moodie young at XYZ Company, Co.

Science.gov (United States)

Sriwana, I. K.; Marie, I. A.; Mangala, D.

2017-12-01

Kencana Gemilang, Co. is one electronics industry engaging in the manufacture sector. This company manufactures and assembles household electronic products, such as rice cooker, fan, iron, blender, etc. The company deals with an issue of underachievement of an established production target on MCM products line 1. This study aimed to calculate line efficiencies, delay times, and initial line smoothness indexes. The research was carried out by means of depicting a precedence diagram and gathering time data of each work element followed by examination and calculation of standard time as well as line balancing using methods of Moodie Young and Generics Algorithm. Based on results of calculation, better line balancing than the existing initial conditions, i.e. improvement in the line efficiency by 18.39%, deterioration in balanced delay by 28.39%, and deterioration of a smoothness index by 23.85% was obtained.

77 FR 61742 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

Science.gov (United States)

2012-10-11

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... order on certain lined paper products from India. The period of review (POR) is January 1, 2010, through... (202) 482-1009. Scope of the Order The merchandise subject to the order is certain lined paper products...

Sistem Verifikasi Tanda Tangan Off-Line Berdasar Ciri Histogram Of Oriented Gradient (HOG Dan Histogram Of Curvature (HoC

Directory of Open Access Journals (Sweden)

Agus Wahyu Widodo

2015-08-01

Full Text Available Abstrak Tanda tangan dengan sifat uniknya merupakan salah satu dari sekian banyak atribut personal yang diterima secara luas untuk verifikasi indentitas seseorang, alat pembuktian kepemilikan berbagai transaksi atau dokumen di dalam masyarakat. Keberhasilan penggunaan ciri gradien dan curvature dalam bidang-bidang penelitian pengenalan pola dan bahwa tanda tangan dapat dikatakan merupakan hasil tulisan tangan yang tersusun atas beragam garis dan lengkungan (curve yang memiliki arah atau orientasi merupakan alasan bahwa kedua ciri tersebut digunakan sebagai metoda verifikasi tanda tangan offline di penelitian ini. Berbagai implementasi dari pre-processing, ekstraksi dan representasi ciri, dan pembelajaran SVM serta usaha perbaikan yang telah dilakukan dalam penelitian ini menunjukkan hasil bahwa ciri HOG dan HoC mampu dimanfaatkan dalam proses verifikasi tanda tangan secara offline.  Pada basis data GPDS960Signature, HOG dan HoC yang dihitung pada ukuran sel 30 x 30 piksel memberikan dengan nilai %FRR terbaik 26,90 dan %FAR 37,56.  Sedangkan pada basis data FUM-PHSDB, HOG dn HoC yang dihitung pada ukuran 60 x 60 piksel memberikan nilai %FRR terbaik 4 dan %FAR 57. Kata kunci: verifikasi tanda tangan, curvature, orientation, gradient, histogram of curvature (HoC, histogram of oriented gradient (HOG Abstract Signature with unique properties is one of the many personal attributes that are widely accepted to verify a person's identity, proof of ownership transactions instrument or document in the community. The successful use of gradient and curvature feature in the research fields of pattern recognition is the reason that both of these features are used as an offline signature verification method in this study. Various implementations of preprocessing, feature extraction and representation, and SVM learning has been done in the study showed results that HOG and HoC feature can be utilized in the process of offline signature verification.  HOG and

Recombinant protein production from stable mammalian cell lines and pools.

Science.gov (United States)

Hacker, David L; Balasubramanian, Sowmya

2016-06-01

We highlight recent developments for the production of recombinant proteins from suspension-adapted mammalian cell lines. We discuss the generation of stable cell lines using transposons and lentivirus vectors (non-targeted transgene integration) and site-specific recombinases (targeted transgene integration). Each of these methods results in the generation of cell lines with protein yields that are generally superior to those achievable through classical plasmid transfection that depends on the integration of the transfected DNA by non-homologous DNA end-joining. This is the main reason why these techniques can also be used for the generation of stable cell pools, heterogenous populations of recombinant cells generated by gene delivery and genetic selection without resorting to single cell cloning. This allows the time line from gene transfer to protein production to be reduced. Copyright © 2016 Elsevier Ltd. All rights reserved.

A line feature-based camera tracking method applicable to nuclear power plant environment

International Nuclear Information System (INIS)

Yan, Weida; Ishii, Hirotake; Shimoda, Hiroshi; Izumi, Masanori

2014-01-01

Augmented reality, which can support the maintenance and decommissioning work of an NPP to improve efficiency and reduce human error, is expected to be practically used in an NPP. AR has indispensable tracking technology that estimates the 3D position and orientation of users in real time, but because of the complication of the NPP environment, it is difficult for its practial use in the large space of an NPP. This study attempt to develop a tracking method for the practial use in an NPP. Marker tracking is a legacy tracking method, but the preparation work necessary for that method is onerous. Therefore, this study developed and evaluated a natural feature-based camera tracking method that demands less preparation and which is applicable in an NPP environment. This method registers natural features as landmarks. When tracking, the natural features existing in the NPP environment can be registered automatically as landmarks. It is therefore possible to expand the tracking area to cover a wide environment in theory. The evaluation result shows that the proposed tracking method has the possibility to support field work of some kinds in an NPP environment. It is possible to reduce the preparation work necessary for the marker tracking method. (author)

Systems, methods and apparatus for developing and maintaining evolving systems with software product lines

Science.gov (United States)

Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Pena, Joaquin (Inventor)

2011-01-01

Systems, methods and apparatus are provided through which an evolutionary system is managed and viewed as a software product line. In some embodiments, the core architecture is a relatively unchanging part of the system, and each version of the system is viewed as a product from the product line. Each software product is generated from the core architecture with some agent-based additions. The result may be a multi-agent system software product line.

The impact of product configurators on lead times in engineering-oriented companies

DEFF Research Database (Denmark)

Haug, Anders; Hvam, Lars; Mortensen, Niels Henrik

2011-01-01

This paper presents a study of how the use of product configurators affects business processes of engineering-oriented companies. A literature study shows that only a minor part of product configuration research deals with the effects of product configuration, and that the ones that do are mostly...... vague when reporting the effects of configurator projects. Only six cases were identified, which provide estimates of the actual size of lead time reduction achieved from product configurators. To broaden this knowledge, this paper presents the results of a study of 14 companies concerning the impact...

Production of high-amylose maize lines using RNA interference in ...

African Journals Online (AJOL)

amylose maize lines with a low T-DNA copy number, demonstrating that RNAi is an efficient method for the production of high-amylose maize lines. Key words: Maize, high-amylose, RNA interference, starch branching enzyme gene sbe2a.

Non-LTE treatment of beryllium lines: Misidentification of the solar Be I feature at 2650 A

International Nuclear Information System (INIS)

Shipman, H.L.; Auer, L.H.

1979-01-01

We investigated the formation of beryllium lines, with particular reference to the solar Be spectrum, in a non-LTE context with a 25-level model atom in which 15 levels were allowed to depart from LTE. In some transitions, particularly the Be I lambda2650 line, the non-LTE effects can be quite dramatic, changing the deduced abundances by a factor of 4. Based on our non-LTE calculations and Copernicus observations of other stars, we find that a solar spectral feature at 2650 A, previously identified by numerous investigators as a Be I line, cannot be produced by Be I. Non-LTE effects on the Be II lambda3131 A line, used for most Be abundance determinations in the literature, are small by comparison

The influence of business strategy on new product activity: the role of market orientation

NARCIS (Netherlands)

Frambach, R.T.; Prabhu, Jaideep; Verhallen, T.M.M.

2003-01-01

In this paper, we propose that business strategy influences new product activity both directly and indirectly via its influence on market orientation. Accordingly, we develop a framework linking firms' relative emphasis on cost leadership, product differentiation and focus strategies to firms'

Advanced Tie Feature Matching for the Registration of Mobile Mapping Imaging Data and Aerial Imagery

Science.gov (United States)

Jende, P.; Peter, M.; Gerke, M.; Vosselman, G.

2016-06-01

Mobile Mapping's ability to acquire high-resolution ground data is opposing unreliable localisation capabilities of satellite-based positioning systems in urban areas. Buildings shape canyons impeding a direct line-of-sight to navigation satellites resulting in a deficiency to accurately estimate the mobile platform's position. Consequently, acquired data products' positioning quality is considerably diminished. This issue has been widely addressed in the literature and research projects. However, a consistent compliance of sub-decimetre accuracy as well as a correction of errors in height remain unsolved. We propose a novel approach to enhance Mobile Mapping (MM) image orientation based on the utilisation of highly accurate orientation parameters derived from aerial imagery. In addition to that, the diminished exterior orientation parameters of the MM platform will be utilised as they enable the application of accurate matching techniques needed to derive reliable tie information. This tie information will then be used within an adjustment solution to correct affected MM data. This paper presents an advanced feature matching procedure as a prerequisite to the aforementioned orientation update. MM data is ortho-projected to gain a higher resemblance to aerial nadir data simplifying the images' geometry for matching. By utilising MM exterior orientation parameters, search windows may be used in conjunction with a selective keypoint detection and template matching. Originating from different sensor systems, however, difficulties arise with respect to changes in illumination, radiometry and a different original perspective. To respond to these challenges for feature detection, the procedure relies on detecting keypoints in only one image. Initial tests indicate a considerable improvement in comparison to classic detector/descriptor approaches in this particular matching scenario. This method leads to a significant reduction of outliers due to the limited availability

PRODUCTIVITY OF SUGAR BEET LINES AND THEIR CROSSES DEPENDING ON PLOIDITY

Directory of Open Access Journals (Sweden)

Andrija Kristek

2003-12-01

Full Text Available Five diploid (2n=2x=18 cms lines, 2 tetraploid (2n=4x=36 and 2 diploid pollinators, as well as 10 diploid and 10 triploid (2n=3x=27 sugar beet hybrids, given by the crossing of investigated cms lines and pollinators were investigated in the field trials. Two triploid hybrids, widespread in sugarbeet production, were sown as standards – Os Sana and Iva. The trials were conducted on two localities (Osijek and Đakovo during the two years (2002 and 2003. There was a difference between years in weather conditions and between localities in terms of type and features of soil. First year of the investigation was humid and warm and the second was dry and hot. Osijek locality was characterized by chernozem-meadow type soil and Đakovo by loessial pseudoglei. The best average root yield was achieved between the investigated genotypes by the triploid hybrid 15 (58.09 t/ha and the hybrids 11, 13 and standard 31. As for the content and utilization of sugar, the standard 31 achieved best results (15.15% followed by the standard hybrids 15, 18, 17 and 11. The best sugar yield was achieved by hybrid 15 (7.08 t/ha, followed by hybrids 13, 11, 10 and 18.

Plasma-electric field controlled growth of oriented graphene for energy storage applications

Science.gov (United States)

Ghosh, Subrata; Polaki, S. R.; Kamruddin, M.; Jeong, Sang Mun; (Ken Ostrikov, Kostya

2018-04-01

It is well known that graphene grows as flat sheets aligned with the growth substrate. Oriented graphene structures typically normal to the substrate have recently attracted major attention. Most often, the normal orientation is achieved in a plasma-assisted growth and is believed to be due to the plasma-induced in-built electric field, which is usually oriented normal to the substrate. This work focuses on the effect of an in-built electric field on the growth direction, morphology, interconnectedness, structural properties and also the supercapacitor performance of various configurations of graphene structures and reveals the unique dependence of these features on the electric field orientation. It is shown that tilting of growth substrates from parallel to the normal direction with respect to the direction of in-built plasma electric field leads to the morphological transitions from horizontal graphene layers, to oriented individual graphene sheets and then interconnected 3D networks of oriented graphene sheets. The revealed transition of the growth orientation leads to a change in structural properties, wetting nature, types of defect in graphitic structures and also affects their charge storage capacity when used as supercapacitor electrodes. This simple and versatile approach opens new opportunities for the production of potentially large batches of differently oriented and structured graphene sheets in one production run.

Mass loss, levitation, accretion, and the sharp-lined features in hot white dwarfs

International Nuclear Information System (INIS)

Bruhweiler, F.C.; Kondo, Y.

1983-01-01

We have studied eight white dwarfs, seven DA and one He-rich types, observed at a high resolution (lambda/Δlambdaroughly-equal10 4 ) with the International Ultraviolet Explorer (IUE). Of the seven DA white dwarfs, three show spectral signatures of ionized heavy elements, such as Si II, SI III, C IV, Si IV, and N V, arising in the immediate environment of these stars. The shortward-shifted lines in two (G191--B2B and 2111+49) of the three DA types showing metallic lines are tentatively interpreted as an indication of mass loss from these stars. The He-rich white dwarf shows the features due to C cV and He II, which also arise in the immediate environment of that star. Although the statistical sample presented here is limited, we tentatively suggest a temperature and effective gravity range (T/sub eff/> or approx. =20,000 K and log (g) < or approx. =8.0) in DA white dwarfs within which metallic lines are present either in the photosphere or in the halo of the stars. We examine the physical processes relevant to the appearance of such metallic lines. We tentatively propose that radiative levitation can explain the appearance of the observed lines in the hot DA white dwarfs, although the role of radiation forces in mass loss is not clear

78 FR 62584 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

Science.gov (United States)

2013-10-22

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... (CVD) order on certain lined paper products from India. The period of review (POR) is January 1, 2011...-1503. Scope of the Order The merchandise subject to the Lined Paper Order \\1\\ is certain lined paper...

Judgment of line orientation depends on gender, education, and type of error.

Science.gov (United States)

Caparelli-Dáquer, Egas M; Oliveira-Souza, Ricardo; Moreira Filho, Pedro F

2009-02-01

Visuospatial tasks are particularly proficient at eliciting gender differences during neuropsychological performance. Here we tested the hypothesis that gender and education are related to different types of visuospatial errors on a task of line orientation that allowed the independent scoring of correct responses ("hits", or H) and one type of incorrect responses ("commission errors", or CE). We studied 343 volunteers of roughly comparable ages and with different levels of education. Education and gender were significantly associated with H scores, which were higher in men and in the groups with higher education. In contrast, the differences between men and women on CE depended on education. We concluded that (I) the ability to find the correct responses differs from the ability to avoid the wrong responses amidst an array of possible alternatives, and that (II) education interacts with gender to promote a stable performance on CE earlier in men than in women.

Object oriented development of engineering software using CLIPS

Science.gov (United States)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

The relationship of metabolic burden to productivity levels in CHO cell lines.

Science.gov (United States)

Zou, Wu; Edros, Raihana; Al-Rubeai, Mohamed

2018-03-01

The growing demand for recombinant therapeutics has driven biotechnologists to develop new production strategies. One such strategy for increasing the expression of heterologous proteins has focused on enhancing cell-specific productivity through environmental perturbations. In this work, the effects of hypothermia, hyperosmolarity, high shear stress, and sodium butyrate treatment on growth and productivity were studied using three (low, medium, and high producing) CHO cell lines that differed in their specific productivities of monoclonal antibody. In all three cell lines, the inhibitory effect of these parameters on proliferation was demonstrated. Additionally, compared to the control, specific productivity was enhanced under all conditions and exhibited a consistent cell line specific pattern, with maximum increases (50-290%) in the low producer, and minimum increases (7-20%) in the high producer. Thus, the high-producing cell line was less responsive to environmental perturbations than the low-producing cell line. We hypothesize that this difference is most likely due to the bottleneck associated with a higher metabolic burden caused by higher antibody expression. Increased recombinant mRNA levels and pyruvate carboxylase activities due to low temperature and hyperosmotic stress were found to be positively associated with the metabolic burden. © 2017 International Union of Biochemistry and Molecular Biology, Inc.

Evidence for impairments in using static line drawings of eye gaze cues to orient visual-spatial attention in children with high functioning autism.

Science.gov (United States)

Goldberg, Melissa C; Mostow, Allison J; Vecera, Shaun P; Larson, Jennifer C Gidley; Mostofsky, Stewart H; Mahone, E Mark; Denckla, Martha B

2008-09-01

We examined the ability to use static line drawings of eye gaze cues to orient visual-spatial attention in children with high functioning autism (HFA) compared to typically developing children (TD). The task was organized such that on valid trials, gaze cues were directed toward the same spatial location as the appearance of an upcoming target, while on invalid trials gaze cues were directed to an opposite location. Unlike TD children, children with HFA showed no advantage in reaction time (RT) on valid trials compared to invalid trials (i.e., no significant validity effect). The two stimulus onset asynchronies (200 ms, 700 ms) did not differentially affect these findings. The results suggest that children with HFA show impairments in utilizing static line drawings of gaze cues to orient visual-spatial attention.

Productivity improvement in the production line with lean manufacturing approach: case study PT. XYZ

Directory of Open Access Journals (Sweden)

diah Halimatussa’

2018-01-01

Full Text Available The increaseing productivity is one of the competitive strategies that can be applied in a company in order to survive in an intense competitive presure. PT. XYZ is a textile industry manufacturing golf gloves and caddy bag. Every day, the company has a production target of 600 pieces per line. However, the desired target is not achieved that it will affect the delay in delivery of products to customers. In this research, a case study on implementing value stream mapping and Kaizen as the lean manufacturing concept is reported. The purpose of this study is to map the current production line, analyse and design the future value stream mapping by eliminating waste occured. It is obtained a lead time reduction as much as 440.4 seconds through eliminating 17 non-value added activities. Then, the output can be increased up to 21% which is equal to 502 pieces.

40 CFR 1048.301 - When must I test my production-line engines?

Science.gov (United States)

2010-07-01

... engines? 1048.301 Section 1048.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.301 When must I test my production-line engines? (a) If you produce engines...

40 CFR 1045.301 - When must I test my production-line engines?

Science.gov (United States)

2010-07-01

... engines? 1045.301 Section 1045.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Testing Production-line Engines § 1045.301 When must I test my production-line engines? (a) If you produce...

FEATURES OF NEED-MOTIVATION ORIENTATION OF STUDENTS WHO REPRESENT THE CHINESE CULTURE

Directory of Open Access Journals (Sweden)

T. V. Mayasova

2016-01-01

Full Text Available In the article it is investigated the features of need-motivational orientation of students who represent the Chinese culture, studying in the higher educational institutions of Russia. As personal characteristics are analyzed the degree of satisfaction of basic needs, the level of motivation to succeed, motivational structure of personality in Chinese and Russian students. The importance of the study of personality characteristics of foreign students of the university helps professionals find the conditions for successful social and cross-cultural adaptation of students in a foreign country. The analysis obtained during the empirical research results confirm that there are certain differences in the needs and motivation of the students, representatives of Chinese and Russian culture. There were significant differences in rates of interpersonal needs, need for recognition, motivation and the comfort level of motivation to the "total activity" in Chinese and Russian students, which allows to predict the occurrence of adaptation and socialization difficulties of foreign students during training.

People with chemical addiction and the features of their life orientations

Directory of Open Access Journals (Sweden)

Makashova O.V.

2017-06-01

Full Text Available according to the author, modern rehabilitation facilities do not have psychological tool that helps people with chemical addictions to optimize their life orientations. The research methods: analysis of psychological literature on this subject; testing; method of mathematical data processing (Mann-Whitney U test, correlation analyses of data. Dependent persons have lowered indicators of reason to live and meaningful orientations. Their personal development is hampered because of a lower level of perception of the integral time of their life. They have higher level of such destructive orientations as confrontational coping, running away from a problem and higher level of constructive orientations – orientation on the solution of the problem, acceptance of responsibility and a positive reassessment of the situation. Sometimes constructive coping is associated with indicators related to the difficulties of personal development. Addicted persons’ tendency toward prosocial behavior is high. At the same time, the helping behavior is more pronounced, when the respondents believe in themselves and in people less. Based on the findings, the Program of Measures, accompanying the rehabilitation of dependent persons, has been compiled.

Off-Line Testing of Tribo-Systems for Sheet Metal Forming Production

DEFF Research Database (Denmark)

Bay, Niels; Ceron, Ermanno

2014-01-01

Off-line testing of new tribo-systems for sheet metal forming production is an important issue, when new, environmentally benign lubricants are to be introduced. To obtain useful results it is, however, vital to ensure similar conditions as in the production process regarding the main tribo...... leading to very high tool/workpiece interface pressure and temperature in the second re-draw. Under such conditions only the best lubricant systems work satisfactory, and the paper shows how the performance of different tribo-systems in production may be predicted by off-line testing combined...

Implementation effect of productive 4-stage field orientation on the student technopreneur skill in vocational schools

Science.gov (United States)

Ismail, Edy; Samsudi, Widjanarko, Dwi; Joyce, Peter; Stearns, Roman

2018-03-01

This model integrates project base learning by creating a product based on environmental needs. The Produktif Orientasi Lapangan 4 Tahap (POL4T) combines technical skills and entrepreneurial elements together in the learning process. This study is to implement the result of technopreneurship learning model development which is environment-oriented by combining technology and entrepreneurship components on Machining Skill Program. This study applies research and development design by optimizing experimental subject. Data were obtained from questionnaires, learning material validation, interpersonal, intrapersonal observation forms, skills, product, teachers and students' responses, and cognitive tasks. Expert validation and t-test calculation are applied to see how effective POL4T learning model. The result of the study is in the form of 4 steps learning model to enhance interpersonal and intrapersonal attitudes, develop practical products which orient to society and appropriate technology so that the products can have high selling value. The model is effective based on the students' post test result, which is better than the pre-test. The product obtained from POL4T model is proven to be better than the productive learning. POL4T model is recommended to be implemented for XI grade students. This is can develop entrepreneurial attitudes that are environment oriented, community needs and technical competencies students.

THE LINE FOR PRODUCTION OF DRIED APPLES, PEARS, CARROTS, PUMPKIN AND CHIPS

Directory of Open Access Journals (Sweden)

G. V. Kalashnikov

2015-01-01

Full Text Available The line is intended for processing of fruit and vegetable raw materials and receiving dried apples, pears, carrots, pumpkins and the fruit-and-vegetable of chips. The line solves problems of improvement of quality of a ready-made product and thermal production efficiency due to more rational alternation of the technological modes of a moisture increment and dehumidification with high extent of use of an energy potential of the heat carrier, use of the inert heat carrier (steam identical by the form for technological thermal processes, decrease in specific energy consumption and metal consumption, and also an intensification of moisture evaporation and creation of the compact multipurpose technological line for production of fruit and vegetable products with the expanded range. The technological production line of dried apples, pears, carrots, pumpkin and fruit and vegetable chips contains the jet washer, the inspection conveyor, the size grader, the car for removal of a seed nest and the device are sharp fruits and vegetables on plates, the sulfiter, the dryer and the packing automatic packing machine. Thus the line contains the combined toroidal device for heatmoisture of handling continuous action divided into sections: section of heating of raw materials, section of convective drying, section of preliminary hydration, which is located between microwave drying sections, and the section of cooling of the dried-up product intended for bringing a product to final readiness. The equipment complex from the drum car with the washing block and multipurpose installation with crushing of raw materials and office of sunflower seeds taking into account raw materials type is provided in lines. Are used recirculation a contour, the heating of the initial raw material fulfilled after drying of pairs and a condensate in the closed contour for creation energy-saving of the "know-how" of a ready product. The line represents modular blocks and is recustomized

Using genre pedagogy to promote student proficiency in the language required for interpreting line graphs

Science.gov (United States)

Smit, Jantien; Bakker, Arthur; van Eerde, Dolly; Kuijpers, Maggie

2016-09-01

The importance of language in mathematics learning has been widely acknowledged. However, little is known about how to make this insight productive in the design and enactment of language-oriented mathematics education. In a design-based research project, we explored how language-oriented mathematics education can be designed and enacted. We drew on genre pedagogy to promote student proficiency in the language required for interpreting line graphs. In the intervention, the teacher used scaffolding strategies to focus students' attention on the structure and linguistic features of the language involved in this particular domain. The research question addressed in this paper is how student proficiency in this language may be promoted. The study comprised nine lessons involving 22 students in grades 5 and 6 (aged 10-12); of these students, 19 had a migrant background. In light of the research aim, we first describe the rationale behind our design. Next, we illustrate how the design was enacted by means of a case study focusing on one student in the classroom practice of developing proficiency in the language required for interpreting line graphs. On the basis of pre- and posttest scores, we conclude that overall their proficiency has increased. Together, the results indicate that and how genre pedagogy may be used to help students become more proficient in the language required in a mathematical domain.

JSI-124 inhibits IgE production in an IgE B cell line

International Nuclear Information System (INIS)

Cui, Lulu; Bi, Jiacheng; Yan, Dehong; Ye, Xiufeng; Zheng, Mingxing; Yu, Guang; Wan, Xiaochun

2017-01-01

IgE is a key effector molecule in atopic diseases; however, the regulation mechanisms of IgE production in IgE B cells remain poorly understood. In the present study, we demonstrate that JSI-124 (cucurbitacin I), a selective STAT3 inhibitor, selectively inhibits production of IgE by a human IgE B cell line, CRL-8033 cells, while does not affect the IgG production by IgG B cell lines. In the aspect of molecular mechanism, we found that Igλ, but not Ighe, gene expression was suppressed by JSI-124. The above effects of JSI-124 were not mediated by affecting cellular proliferation or apoptosis. Furthermore, multiple B cell differentiation-related genes expression was not significantly affected by JSI-124. Taken together, we demonstrate a potential strategy of therapeutically suppressing IgE production without affecting IgG production in atopic patients. - Highlights: • JSI-124 inhibits IgE production in an IgE B cell line, CRL-8033 cells. • JSI-124 does not affect IgG production by IgG B cell lines. • JSI-124 inhibits IgE production mainly by suppressing transcription of Igλ.

Finding the top influential bloggers based on productivity and popularity features

Science.gov (United States)

Khan, Hikmat Ullah; Daud, Ali

2017-07-01

A blog acts as a platform of virtual communication to share comments or views about products, events and social issues. Like other social web activities, blogging actions spread to a large number of people. Users influence others in many ways, such as buying a product, having a particular political or social opinion or initiating new activity. Finding the top influential bloggers is an active research domain as it helps us in various fields, such as online marketing, e-commerce, product search and e-advertisements. There exist various models to find the influential bloggers, but they consider limited features using non-modular approach. This paper proposes a new model, Popularity and Productivity Model (PPM), based on a modular approach to find the top influential bloggers. It consists of popularity and productivity modules which exploit various features. We discuss the role of each proposed and existing features and evaluate the proposed model against the standard baseline models using datasets from the real-world blogs. The analysis using standard performance evaluation measures verifies that both productivity and popularity modules play a vital role to find influential bloggers in blogging community in an effective manner.

Market-oriented new product development: How can a means-end chain approach affect the process?

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted

2005-01-01

. The resukts also indicate that MEC data are most valuable to the team in the early stages of the development process and that lack of a learning orientation may inhibit the effects of a MEC approach. Originality/value - The MEC approach shows clear advantages for market oriented product development.......Purpose - Aims to ascertain whether a well-known theory within consumer research - a means-end chain (MEC) - can be used as a catalyst to achieve market oriented product development. Design/methodology/approach - Describes a case study, involving a Danish food manufacturer, where a MEC approach...... was introduced to a cross-functional development team at two different stages of the development process. Findings - Results show that MEC data is perceived as a good way of gaining knowledge about consumers; that the information serves well as the basis of discussions and for keeping project goals fixed...

Latest developments in on- and off-line inspection of bank notes during production

Science.gov (United States)

Brown, Stephen C.

2004-06-01

The inspection of bank notes is a highly labour intensive process where traditionally every note on every sheet is inspected manually. However with the advent of more and more sophisticated security features, both visible and invisible, and the requirement of cost reduction in the printing process, it is clear that automation is required. Machines for the automatic inspection of bank notes have been on the market for the past 10 to 12 years, but recent developments in technology have enabled a new generation of detectors and machines to be developed. This paper focuses on the latest developments in both the off-line and on-line inspection of bank notes covering not only the visible spectrum but also a new range of detectors for inspection some of the more common invisible features used as covert features in today's bank notes.

New Keypoint Matching Method Using Local Convolutional Features for Power Transmission Line Icing Monitoring

Directory of Open Access Journals (Sweden)

Qiangliang Guo

2018-02-01

Full Text Available Power transmission line icing (PTLI problems, which cause tremendous damage to the power grids, has drawn much attention. Existing three-dimensional measurement methods based on binocular stereo vision was recently introduced to measure the ice thickness in PTLI, but failed to meet requirements of practical applications due to inefficient keypoint matching in the complex PTLI scene. In this paper, a new keypoint matching method is proposed based on the local multi-layer convolutional neural network (CNN features, termed Local Convolutional Features (LCFs. LCFs are deployed to extract more discriminative features than the conventional CNNs. Particularly in LCFs, a multi-layer features fusion scheme is exploited to boost the matching performance. Together with a location constraint method, the correspondence of neighboring keypoints is further refined. Our approach achieves 1.5%, 5.3%, 13.1%, 27.3% improvement in the average matching precision compared with SIFT, SURF, ORB and MatchNet on the public Middlebury dataset, and the measurement accuracy of ice thickness can reach 90.9% compared with manual measurement on the collected PTLI dataset.

Engineering Mathematical Analysis Method for Productivity Rate in Linear Arrangement Serial Structure Automated Flow Assembly Line

Directory of Open Access Journals (Sweden)

Tan Chan Sin

2015-01-01

Full Text Available Productivity rate (Q or production rate is one of the important indicator criteria for industrial engineer to improve the system and finish good output in production or assembly line. Mathematical and statistical analysis method is required to be applied for productivity rate in industry visual overviews of the failure factors and further improvement within the production line especially for automated flow line since it is complicated. Mathematical model of productivity rate in linear arrangement serial structure automated flow line with different failure rate and bottleneck machining time parameters becomes the basic model for this productivity analysis. This paper presents the engineering mathematical analysis method which is applied in an automotive company which possesses automated flow assembly line in final assembly line to produce motorcycle in Malaysia. DCAS engineering and mathematical analysis method that consists of four stages known as data collection, calculation and comparison, analysis, and sustainable improvement is used to analyze productivity in automated flow assembly line based on particular mathematical model. Variety of failure rate that causes loss of productivity and bottleneck machining time is shown specifically in mathematic figure and presents the sustainable solution for productivity improvement for this final assembly automated flow line.

Applying CBR to machine tool product configuration design oriented to customer requirements

Science.gov (United States)

Wang, Pengjia; Gong, Yadong; Xie, Hualong; Liu, Yongxian; Nee, Andrew Yehching

2017-01-01

Product customization is a trend in the current market-oriented manufacturing environment. However, deduction from customer requirements to design results and evaluation of design alternatives are still heavily reliant on the designer's experience and knowledge. To solve the problem of fuzziness and uncertainty of customer requirements in product configuration, an analysis method based on the grey rough model is presented. The customer requirements can be converted into technical characteristics effectively. In addition, an optimization decision model for product planning is established to help the enterprises select the key technical characteristics under the constraints of cost and time to serve the customer to maximal satisfaction. A new case retrieval approach that combines the self-organizing map and fuzzy similarity priority ratio method is proposed in case-based design. The self-organizing map can reduce the retrieval range and increase the retrieval efficiency, and the fuzzy similarity priority ratio method can evaluate the similarity of cases comprehensively. To ensure that the final case has the best overall performance, an evaluation method of similar cases based on grey correlation analysis is proposed to evaluate similar cases to select the most suitable case. Furthermore, a computer-aided system is developed using MATLAB GUI to assist the product configuration design. The actual example and result on an ETC series machine tool product show that the proposed method is effective, rapid and accurate in the process of product configuration. The proposed methodology provides a detailed instruction for the product configuration design oriented to customer requirements.

Consumer-Oriented New Product Development in Fruit Flavour Breeding - A Bayesian Approach

NARCIS (Netherlands)

Tesfaye, L.M.; Lans, van der I.A.; Bink, M.C.A.M.; Gremmen, H.G.J.; Trijp, van J.C.M.

2014-01-01

Taking consumer quality perceptions into account is very important for new-fruit product development in todays competitive food market. To this end, consumer-oriented quality improvement models like the Quality Guidance Model (QGM) have been proposed. Implementing such mod- els in the agro industry

Tuned by experience: How orientation probability modulates early perceptual processing.

Science.gov (United States)

Jabar, Syaheed B; Filipowicz, Alex; Anderson, Britt

2017-09-01

Probable stimuli are more often and more quickly detected. While stimulus probability is known to affect decision-making, it can also be explained as a perceptual phenomenon. Using spatial gratings, we have previously shown that probable orientations are also more precisely estimated, even while participants remained naive to the manipulation. We conducted an electrophysiological study to investigate the effect that probability has on perception and visual-evoked potentials. In line with previous studies on oddballs and stimulus prevalence, low-probability orientations were associated with a greater late positive 'P300' component which might be related to either surprise or decision-making. However, the early 'C1' component, thought to reflect V1 processing, was dampened for high-probability orientations while later P1 and N1 components were unaffected. Exploratory analyses revealed a participant-level correlation between C1 and P300 amplitudes, suggesting a link between perceptual processing and decision-making. We discuss how these probability effects could be indicative of sharpening of neurons preferring the probable orientations, due either to perceptual learning, or to feature-based attention. Copyright © 2017 Elsevier Ltd. All rights reserved.

Determinants of choice of market-oriented indigenous Horo cattle production in Dano district of western Showa, Ethiopia.

Science.gov (United States)

Alemayehu, Befikadu; Bogale, Ayalneh; Wollny, Clemens; Tesfahun, Girma

2010-12-01

Based on a survey data collected from 150 farming households in Dano district of western Showa of Ethiopia, this paper analyzes determinants of smallholders' choice for market oriented indigenous Horo cattle production and tries to suggest policy alternatives for sustainable use of animal genetic resource in the study area. Descriptive statistics and binary logistic model were employed to analyze the data. Eight explanatory variables including age of the household head, size of the grazing land, total size of cultivated land, farmer's experience in indigenous cattle production, farmer's attitude towards productivity of local breed, off-farm income, fattening practice, and availability of information and training of the head of the household regarding conservation, management and sustainable use indigenous cattle were found to be statistically significant variables to explain farmers' choice for market oriented indigenous cattle production activities. Besides, possible policy implications were made in order to improve conservation, management and sustainable use of market oriented indigenous cattle genetic resources.

CONSTRAINING JET PRODUCTION SCENARIOS BY STUDIES OF NARROW-LINE RADIO GALAXIES

Energy Technology Data Exchange (ETDEWEB)

Sikora, Marek [Nicolaus Copernicus Astronomical Center, Bartycka 18, 00-716 Warsaw (Poland); Stasinska, Grazyna [LUTH, Observatoire de Paris, CNRS, Universite Paris Diderot, Place Jules Janssen, F-92190 Meudon (France); Koziel-Wierzbowska, Dorota [Astronomical Observatory, Jagiellonian University, ul. Orla 171, 30-244 Krakow (Poland); Madejski, Greg M. [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, Stanford, CA 94305 (United States); Asari, Natalia V., E-mail: sikora@camk.edu.pl [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom)

2013-03-01

We study a large sample of narrow-line radio galaxies (NLRGs) with extended radio structures. Using 1.4 GHz radio luminosities L {sub 1.4}, narrow optical emission line luminosities L {sub [OIII]} and L{sub H{sub {alpha}}}, as well as black hole masses M {sub BH} derived from stellar velocity dispersions measured from the optical spectra obtained with the Sloan Digital Sky Survey, we find that (1) NLRGs cover about four decades of the Eddington ratio, {lambda} {identical_to} L {sub bol}/L {sub Edd}{proportional_to}L {sub line}/M {sub BH}; (2) L {sub 1.4}/M {sub BH} strongly correlates with {lambda}; and (3) radio loudness, R{identical_to}L{sub 1.4}/L{sub line}, strongly anti-correlates with {lambda}. A very broad range of the Eddington ratio indicates that the parent population of NLRGs includes both radio-loud quasars (RLQs) and broad-line radio galaxies (BLRGs). The correlations they obey and their high jet production efficiencies favor a jet production model which involves the so-called magnetically choked accretion scenario. In this model, production of the jet is dominated by the Blandford-Znajek mechanism, and the magnetic fields in the vicinity of the central black hole are confined by the ram pressure of the accretion flow. Since large net magnetic flux accumulated in central regions of the accretion flow required by the model can take place only via geometrically thick accretion, we speculate that the massive, 'cold' accretion events associated with luminous emission-line active galactic nucleus can be accompanied by an efficient jet production only if preceded by a hot, very sub-Eddington accretion phase.

A non-LTE treatment of beryllium lines - Misidentification of the solar Be I feature at 2650 A

Science.gov (United States)

Shipman, H. L.; Auer, L. H.

1979-01-01

The formation of beryllium lines, with particular reference to the solar Be spectrum, is investigated in a non-LTE context with a 25-level model atom in which 15 levels are allowed to depart from LTE. In some transitions, particularly the Be I 2650-A line, the non-LTE effects can be quite dramatic, changing the deduced abundances by a factor of 4. Based on the non-LTE calculations and Copernicus observations of other stars, it is found that a solar spectral feature at 2650 A, previously identified by numerous investigators as a Be I line, cannot be produced by Be I. Non-LTE effects on the Be II 3131-A line, used for most Be abundance determinations in the literature, are small by comparison.

Open Wilson lines and generalized star product in noncommutative scalar field theories

International Nuclear Information System (INIS)

Kiem, Youngjai; Sato, Haru-Tada; Rey, Soo-Jong; Yee, Jung-Tay

2002-01-01

Open Wilson line operators and a generalized star product have been studied extensively in noncommutative gauge theories. We show that they also show up in noncommutative scalar field theories as universal structures. We first point out that the dipole picture of noncommutative geometry provides an intuitive argument for the robustness of the open Wilson lines and generalized star products therein. We calculate the one-loop effective action of noncommutative scalar field theory with a cubic self-interaction and show explicitly that the generalized star products arise in the nonplanar part. It is shown that, at the low-energy, large noncommutativity limit, the nonplanar part is expressible solely in terms of the scalar open Wilson line operator and descendants

Design of Control System for Flexible Packaging Bags Palletizing Production Line Based on PLC

Science.gov (United States)

Zheng, Huiping; Chen, Lin; Zhao, Xiaoming; Liu, Zhanyang

Flexible packaging bags palletizing production line is to put the bags in the required area according to particular order and size, in order to finish handling, storage, loading and unloading, transportation and other logistics work of goods. Flexible packaging bags palletizing line is composed of turning bags mechanism, shaping mechanism, indexing mechanism, marshalling mechanism, pushing bags mechanism, pressing bags mechanism, laminating mechanism, elevator, tray warehouse, tray conveyor and loaded tray conveyor. Whether the whole production line can smoothly run depends on each of the above equipment and precision control among them. In this paper the technological process and the control logic of flexible packaging bags palletizing production line is introduced. Palletizing process of the production line realized automation by means of a control system based on programmable logic controller (PLC). It has the advantages of simple structure, reliable and easy maintenance etc.

Combining Landform Thematic Layer and Object-Oriented Image Analysis to Map the Surface Features of Mountainous Flood Plain Areas

Science.gov (United States)

Chuang, H.-K.; Lin, M.-L.; Huang, W.-C.

2012-04-01

The Typhoon Morakot on August 2009 brought more than 2,000 mm of cumulative rainfall in southern Taiwan, the extreme rainfall event caused serious damage to the Kaoping River basin. The losses were mostly blamed on the landslides along sides of the river, and shifting of the watercourse even led to the failure of roads and bridges, as well as flooding and levees damage happened around the villages on flood bank and terraces. Alluvial fans resulted from debris flow of stream feeders blocked the main watercourse and debris dam was even formed and collapsed. These disasters have highlighted the importance of identification and map the watercourse alteration, surface features of flood plain area and artificial structures soon after the catastrophic typhoon event for natural hazard mitigation. Interpretation of remote sensing images is an efficient approach to acquire spatial information for vast areas, therefore making it suitable for the differentiation of terrain and objects near the vast flood plain areas in a short term. The object-oriented image analysis program (Definiens Developer 7.0) and multi-band high resolution satellite images (QuickBird, DigitalGlobe) was utilized to interpret the flood plain features from Liouguei to Baolai of the the Kaoping River basin after Typhoon Morakot. Object-oriented image interpretation is the process of using homogenized image blocks as elements instead of pixels for different shapes, textures and the mutual relationships of adjacent elements, as well as categorized conditions and rules for semi-artificial interpretation of surface features. Digital terrain models (DTM) are also employed along with the above process to produce layers with specific "landform thematic layers". These layers are especially helpful in differentiating some confusing categories in the spectrum analysis with improved accuracy, such as landslides and riverbeds, as well as terraces, riverbanks, which are of significant engineering importance in disaster

Nutritional quality and child-oriented marketing of breakfast cereals in Guatemala.

Science.gov (United States)

Soo, J; Letona, P; Chacon, V; Barnoya, J; Roberto, C A

2016-01-01

Food marketing has been implicated as an important driver of obesity. However, few studies have examined food marketing in low- and middle-income countries (LMICs). This study documents the prevalence of advertising on cereal boxes in Guatemala and examines associations between various marketing strategies and nutritional quality. One box from all available cereals was purchased from a supermarket located in an urban area in Guatemala City, Guatemala. A content analysis was performed to document child-oriented marketing practices, product claims and health-evoking images. The Nutrient Profile Model (NPM) was used to calculate an overall nutrition score for each cereal (the higher the score, the lower the nutritional quality). In all, 106 cereals were purchased, and half of the cereals featured child-oriented marketing (54, 50.9%). Cereals had a mean (±s.d.) of 5.10±2.83 product claims per cereal, and most cereals (102, 96.2%) contained health-evoking images. Child-oriented cereals had, on average, higher NPM scores (13.0±0.55 versus 7.90±0.74, Ptargeting children were generally of poor nutritional quality. Cereals displaying health claims were also not healthier than those without such claims. Our findings support the need for regulations restricting the use of child-oriented marketing and health claims for certain products.

Features communikations media products and value system of teens

OpenAIRE

Гречаник, М. І.

2014-01-01

We investigate the genesis of the features of the relationship of media products and values as a teenager in the light of current trends in contemporary global information society, found that media products can influence the formation and development of personal values yk adolescence, due to physiological characteristics age. Media products meets the needs of adolescents and penetrates the subconscious, thus affecting the value system, which can lead to deformation of values as a teenager fal...

Reengineering a PC-based System into the Mobile Device Product Line

DEFF Research Database (Denmark)

Zhang, Weishan; Jarzabek, Stanislaw; Loughran, Neil

2003-01-01

There is a growing demand to port existing PC-based software systems to mobile device platforms. Systems running on mobile devices share basic characteristics with their PC-based counterparts, but differ from them in details of user interfaces, application models, etc. Systems running on mobile...... devices must also perform well using less memory than PC-based systems. Mobile devices themselves are different from each other in many ways, too. We describe how we made an existing PC-based City Guide System available on a wide range of mobile devices, in a cost-effective way. We applied "reengineering...... into a product line architecture" approach to achieve the goal. Our product line architecture facilitates reuse via generation. We generate specific City Guide Systems for target platforms including PC, Pocket PC and other mobile devices, from generic meta-components that form the City Guide System product line...

A case of complex regional pain syndrome with agnosia for object orientation.

Science.gov (United States)

Robinson, Gail; Cohen, Helen; Goebel, Andreas

2011-07-01

This systematic investigation of the neurocognitive correlates of complex regional pain syndrome (CRPS) in a single case also reports agnosia for object orientation in the context of persistent CRPS. We report a patient (JW) with severe long-standing CRPS who had no difficulty identifying and naming line drawings of objects presented in 1 of 4 cardinal orientations. In contrast, he was extremely poor at reorienting these objects into the correct upright orientation and in judging whether an object was upright or not. Moreover, JW made orientation errors when copying drawings of objects, and he also showed features of mirror reversal in writing single words and reading single letters. The findings are discussed in relation to accounts of visual processing. Agnosia for object orientation is the term for impaired knowledge of an object's orientation despite good recognition and naming of the same misoriented object. This defect has previously only been reported in patients with major structural brain lesions. The neuroanatomical correlates are discussed. The patient had no structural brain lesion, raising the possibility that nonstructural reorganisation of cortical networks may be responsible for his deficits. Other patients with CRPS may have related neurocognitive defects. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

Object-oriented programming with mixins in Ada

Science.gov (United States)

Seidewitz, ED

1992-01-01

Recently, I wrote a paper discussing the lack of 'true' object-oriented programming language features in Ada 83, why one might desire them in Ada, and how they might be added in Ada 9X. The approach I took in this paper was to build the new object-oriented features of Ada 9X as much as possible on the basic constructs and philosophy of Ada 83. The object-oriented features proposed for Ada 9X, while different in detail, are based on the same kind of approach. Further consideration of this approach led me on a long reflection on the nature of object-oriented programming and its application to Ada. The results of this reflection, presented in this paper, show how a fairly natural object-oriented style can indeed be developed even in Ada 83. The exercise of developing this style is useful for at least three reasons: (1) it provides a useful style for programming object-oriented applications in Ada 83 until new features become available with Ada 9X; (2) it demystifies many of the mechanisms that seem to be 'magic' in most object-oriented programming languages by making them explicit; and (3) it points out areas that are and are not in need of change in Ada 83 to make object-oriented programming more natural in Ada 9X. In the next four sections I will address in turn the issues of object-oriented classes, mixins, self-reference and supertyping. The presentation is through a sequence of examples. This results in some overlap with that paper, but all the examples in the present paper are written entirely in Ada 83. I will return to considerations for Ada 9X in the last section of the paper.

LOCAL LINE BINARY PATTERN FOR FEATURE EXTRACTION ON PALM VEIN RECOGNITION

Directory of Open Access Journals (Sweden)

Jayanti Yusmah Sari

2015-08-01

Full Text Available In recent years, palm vein recognition has been studied to overcome problems in conventional systems in biometrics technology (finger print, face, and iris. Those problems in biometrics includes convenience and performance. However, due to the clarity of the palm vein image, the veins could not be segmented properly. To overcome this problem, we propose a palm vein recognition system using Local Line Binary Pattern (LLBP method that can extract robust features from the palm vein images that has unclear veins. LLBP is an advanced method of Local Binary Pattern (LBP, a texture descriptor based on the gray level comparison of a neighborhood of pixels. There are four major steps in this paper, Region of Interest (ROI detection, image preprocessing, features extraction using LLBP method, and matching using Fuzzy k-NN classifier. The proposed method was applied on the CASIA Multi-Spectral Image Database. Experimental results showed that the proposed method using LLBP has a good performance with recognition accuracy of 97.3%. In the future, experiments will be conducted to observe which parameter that could affect processing time and recognition accuracy of LLBP is needed

Object-Oriented Econometrics with Ox

OpenAIRE

Kulaksizoglu, Tamer

2015-01-01

This article reviews the object-oriented features of the Ox matrix programming language. We discuss object-oriented programming in general and give econometric examples coded in Ox. We also discuss some useful built-in classes that come with the Ox distribution.

From product to service orientation in the maritime equipment industry

DEFF Research Database (Denmark)

Matzen, Detlef; McAloone, Timothy Charles

2008-01-01

of their products in operation. In this paper we present a case study of a shipping equipment manufacturer that is currently shifting business focus from manufacturing towards services delivery. Using a modelling scheme to differentiate and categorise different development tasks within the frame of business......In the shipping industry, operational performance of ships and their equipment is crucial to business. Suppliers of machinery and equipment are aware of this situation and see business development potential in setting up service systems that are dedicated to ensuring the performance...... development towards service oriented business, the case delivers insights into the broader context and product related parameters influencing the options and requirements for service system development....

Line-feature-based calibration method of structured light plane parameters for robot hand-eye system

Science.gov (United States)

Qi, Yuhan; Jing, Fengshui; Tan, Min

2013-03-01

For monocular-structured light vision measurement, it is essential to calibrate the structured light plane parameters in addition to the camera intrinsic parameters. A line-feature-based calibration method of structured light plane parameters for a robot hand-eye system is proposed. Structured light stripes are selected as calibrating primitive elements, and the robot moves from one calibrating position to another with constraint in order that two misaligned stripe lines are generated. The images of stripe lines could then be captured by the camera fixed at the robot's end link. During calibration, the equations of two stripe lines in the camera coordinate system are calculated, and then the structured light plane could be determined. As the robot's motion may affect the effectiveness of calibration, so the robot's motion constraints are analyzed. A calibration experiment and two vision measurement experiments are implemented, and the results reveal that the calibration accuracy can meet the precision requirement of robot thick plate welding. Finally, analysis and discussion are provided to illustrate that the method has a high efficiency fit for industrial in-situ calibration.

Bucket Brigades to Increase Productivity in a Luxury Assembly Line

Directory of Open Access Journals (Sweden)

Filippo De Carlo

2013-08-01

Full Text Available One of the most challenging issues in manual assembly lines is to achieve the best balance of workloads. There are many analytic approaches to solve this problem, but they are often neglected, since they are time-consuming and require high level engineering skills. Fashion bags packaging lines must comply with a number of different products with low production volumes, while the organization of the line is often under the mere responsibility of the foreman, who balances workloads in an empirical way. The aim of this work is to evaluate the effectiveness of the arrangement of bucket brigades (BBs for an assembly line of luxury handbags. To do this, it was decided to perform a testing activity in a company producing fashion handbags in order to compare the self-made design with the BBs and with a simple assembly line balancing problem algorithm. The originality of this research lies in the fact that there are no studies in the literature on BBs applied to the packaging of highly variable small batches. The results were excellent, showing the advantages of BBs in terms of flexibility, the reduction of work in the process and the ability to handle small anomalies.

Multi-board concept - a scenario based approach for supporting product quality and life cycle oriented design

DEFF Research Database (Denmark)

Robotham, Antony John; Hertzum, Morten

2000-01-01

This paper will describe the multi-board concept, which is a working approach for supporting life cycle oriented design and product quality. Aspects of this concept include construction of a common working environment where multiple display boards depict scenarios of the product life cycle...... to believe that the multi-board concept promises to be a useful means of communication amongst the design team. We be-lieve that it fosters a thorough understanding of life cycle events, which, in turn, inspires the design of innovative products of the highest quality......., creating a shared quality mindset amongst design-ers, and developing creativity and synthesis in product design. The appropriateness of scenarios for supporting life cycle oriented design will be ar-gued and preliminary results from early experi-mentation will be presented.Initial results lead us...

Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel

Science.gov (United States)

Leuning, Nora; Steentjes, Simon; Stöcker, Anett; Kawalla, Rudolf; Wei, Xuefei; Dierdorf, Jens; Hirt, Gerhard; Roggenbuck, Stefan; Korte-Kerzel, Sandra; Weiss, Hannes A.; Volk, Wolfram; Hameyer, Kay

2018-04-01

Thin laminations of non-grain oriented (NO) electrical steels form the magnetic core of rotating electrical machines. The magnetic properties of these laminations are therefore key elements for the efficiency of electric drives and need to be fully utilized. Ideally, high magnetization and low losses are realized over the entire polarization and frequency spectrum at reasonable production and processing costs. However, such an ideal material does not exist and thus, achievable magnetic properties need to be deduced from the respective application requirements. Parameters of the electrical steel such as lamination thickness, microstructure and texture affect the magnetic properties as well as their polarization and frequency dependence. These structural features represent possibilities to actively alter the magnetic properties, e.g., magnetization curve, magnetic loss or frequency dependence. This paper studies the influence of production and processing on the resulting magnetic properties of a 2.4 wt% Si electrical steel. Aim is to close the gap between production influence on the material properties and its resulting effect on the magnetization curves and losses at different frequencies with a strong focus on occurring interdependencies between production and mechanical processing. The material production is realized on an experimental processing route that comprises the steps of hot rolling, cold rolling, annealing and punching.

Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel

Directory of Open Access Journals (Sweden)

Nora Leuning

2018-04-01

Full Text Available Thin laminations of non-grain oriented (NO electrical steels form the magnetic core of rotating electrical machines. The magnetic properties of these laminations are therefore key elements for the efficiency of electric drives and need to be fully utilized. Ideally, high magnetization and low losses are realized over the entire polarization and frequency spectrum at reasonable production and processing costs. However, such an ideal material does not exist and thus, achievable magnetic properties need to be deduced from the respective application requirements. Parameters of the electrical steel such as lamination thickness, microstructure and texture affect the magnetic properties as well as their polarization and frequency dependence. These structural features represent possibilities to actively alter the magnetic properties, e.g., magnetization curve, magnetic loss or frequency dependence. This paper studies the influence of production and processing on the resulting magnetic properties of a 2.4 wt% Si electrical steel. Aim is to close the gap between production influence on the material properties and its resulting effect on the magnetization curves and losses at different frequencies with a strong focus on occurring interdependencies between production and mechanical processing. The material production is realized on an experimental processing route that comprises the steps of hot rolling, cold rolling, annealing and punching.

On-line monitoring of solar cell module production by ellipsometry technique

International Nuclear Information System (INIS)

Fried, M.

2014-01-01

Non-destructive analyzing tools are needed at all stages of thin film photovoltaic (PV) development, and on production lines. In thin film PV, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity (because each elementary cell is connected electrically in series within a big panel) serve as an important starting point in the evaluation of the performance of the cell or module. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. This work tries to review the investigations of different types of PV-layers (anti-reflective coating, transparent-conductive oxide (TCO), multi-diode-structure, absorber and window layers) showing the existing dielectric function databases for the thin film components of CdTe, CuInGaSe 2 , thin Si, and TCO layers. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. In the last years [M. Fried et al., Thin Solid Films 519, 2730 (2011)], instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl = 350–1000 nm) data. Up to now a single 30 point line image can be collected in 10 s over a 15 cm width of PV material. This year we are building a 30 and a 60 cm width expanded beam ellipsometer the speed of which will be increased by 10 ×. Then 1800 points can be mapped in a 1 min traverse of a 60 ∗ 120 cm PV panel or flexible roll-to-roll substrate. - Highlights: • Instrumentation developed provides a line image of

On-line monitoring of solar cell module production by ellipsometry technique

Energy Technology Data Exchange (ETDEWEB)

Fried, M., E-mail: fried@mfa.kfki.hu

2014-11-28

Non-destructive analyzing tools are needed at all stages of thin film photovoltaic (PV) development, and on production lines. In thin film PV, layer thicknesses, micro-structure, composition, layer optical properties, and their uniformity (because each elementary cell is connected electrically in series within a big panel) serve as an important starting point in the evaluation of the performance of the cell or module. An important focus is to express the dielectric functions of each component material in terms of a handful of wavelength independent parameters whose variation can cover all process variants of that material. With the resulting database, spectroscopic ellipsometry coupled with multilayer analysis can be developed for on-line point-by-point mapping and on-line line-by-line imaging. This work tries to review the investigations of different types of PV-layers (anti-reflective coating, transparent-conductive oxide (TCO), multi-diode-structure, absorber and window layers) showing the existing dielectric function databases for the thin film components of CdTe, CuInGaSe{sub 2}, thin Si, and TCO layers. Off-line point-by-point mapping can be effective for characterization of non-uniformities in full scale PV panels in developing labs but it is slow in the on-line mode when only 15 points can be obtained (within 1 min) as a 120 cm long panel moves by the mapping station. In the last years [M. Fried et al., Thin Solid Films 519, 2730 (2011)], instrumentation was developed that provides a line image of spectroscopic ellipsometry (wl = 350–1000 nm) data. Up to now a single 30 point line image can be collected in 10 s over a 15 cm width of PV material. This year we are building a 30 and a 60 cm width expanded beam ellipsometer the speed of which will be increased by 10 ×. Then 1800 points can be mapped in a 1 min traverse of a 60 ∗ 120 cm PV panel or flexible roll-to-roll substrate. - Highlights: • Instrumentation developed provides a line image of

Emergent scar lines in chaotic advection of passive directors

Science.gov (United States)

Hejazi, Bardia; Mehlig, Bernhard; Voth, Greg A.

2017-12-01

We examine the spatial field of orientations of slender fibers that are advected by a two-dimensional fluid flow. The orientation field of these passive directors are important in a wide range of industrial and geophysical flows. We introduce emergent scar lines as the dominant coherent structures in the orientation field of passive directors in chaotic flows. Previous work has identified the existence of scar lines where the orientation rotates by π over short distances, but the lines that were identified disappeared as time progressed. As a result, earlier work focused on topological singularities in the orientation field, which we find to play a negligible role at long times. We use the standard map as a simple time-periodic two-dimensional flow that produces Lagrangian chaos. This class of flows produces persistent patterns in passive scalar advection and we find that a different kind of persistent pattern develops in the passive director orientation field. We identify the mechanism by which emergent scar lines grow to dominate these patterns at long times in complex flows. Emergent scar lines form where the recent stretching of the fluid element is perpendicular to earlier stretching. Thus these scar lines can be labeled by their age, defined as the time since their stretching reached a maximum.

Featureous: A Tool for Feature-Centric Analysis of Java Software

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2010-01-01

Feature-centric comprehension of source code is necessary for incorporating user-requested modifications during software evolution and maintenance. However, such comprehension is difficult to achieve in case of large object-oriented programs due to the size, complexity, and implicit character...... of mappings between features and source code. To support programmers in overcoming these difficulties, we present a feature-centric analysis tool, Featureous. Our tool extends the NetBeans IDE with mechanisms for efficient location of feature implementations in legacy source code, and an extensive analysis...

Physiological response and productivity of safflower lines under water deficit and rehydration.

Science.gov (United States)

Bortolheiro, Fernanda P A P; Silva, Marcelo A

2017-01-01

Water deficit is one of the major stresses affecting plant growth and productivity worldwide. Plants induce various morphological, physiological, biochemical and molecular changes to adapt to the changing environment. Safflower (Carthamus tinctorius L.), a potential oil producer, is highly adaptable to various environmental conditions, such as lack of rainfall and temperatures. The objective of this work was to study the physiological and production characteristics of six safflower lines in response to water deficit followed by rehydration. The experiment was conducted in a protected environment and consisted of 30 days of water deficit followed by 18 days of rehydration. A differential response in terms of photosynthetic pigments, electrolyte leakage, water potential, relative water content, grain yield, oil content, oil yield and water use efficiency was observed in the six lines under water stress. Lines IMA 04, IMA 10, IMA 14 showed physiological characteristics of drought tolerance, with IMA 14 and IMA 16 being the most productive after water deficit. IMA 02 and IMA 21 lines displayed intermediate characteristics of drought tolerance. It was concluded that the lines responded differently to water deficit stress, showing considerable genetic variation and influence to the environment.

Physiological response and productivity of safflower lines under water deficit and rehydration

Directory of Open Access Journals (Sweden)

FERNANDA P.A.P. BORTOLHEIRO

2017-12-01

Full Text Available ABSTRACT Water deficit is one of the major stresses affecting plant growth and productivity worldwide. Plants induce various morphological, physiological, biochemical and molecular changes to adapt to the changing environment. Safflower (Carthamus tinctorius L., a potential oil producer, is highly adaptable to various environmental conditions, such as lack of rainfall and temperatures. The objective of this work was to study the physiological and production characteristics of six safflower lines in response to water deficit followed by rehydration. The experiment was conducted in a protected environment and consisted of 30 days of water deficit followed by 18 days of rehydration. A differential response in terms of photosynthetic pigments, electrolyte leakage, water potential, relative water content, grain yield, oil content, oil yield and water use efficiency was observed in the six lines under water stress. Lines IMA 04, IMA 10, IMA 14 showed physiological characteristics of drought tolerance, with IMA 14 and IMA 16 being the most productive after water deficit. IMA 02 and IMA 21 lines displayed intermediate characteristics of drought tolerance. It was concluded that the lines responded differently to water deficit stress, showing considerable genetic variation and influence to the environment.

A prototype feature system for feature retrieval using relationships

Science.gov (United States)

Choi, J.; Usery, E.L.

2009-01-01

Using a feature data model, geographic phenomena can be represented effectively by integrating space, theme, and time. This paper extends and implements a feature data model that supports query and visualization of geographic features using their non-spatial and temporal relationships. A prototype feature-oriented geographic information system (FOGIS) is then developed and storage of features named Feature Database is designed. Buildings from the U.S. Marine Corps Base, Camp Lejeune, North Carolina and subways in Chicago, Illinois are used to test the developed system. The results of the applications show the strength of the feature data model and the developed system 'FOGIS' when they utilize non-spatial and temporal relationships in order to retrieve and visualize individual features.

Featural Guidance in Conjunction Search: The Contrast between Orientation and Color

Science.gov (United States)

Anderson, Giles M.; Heinke, Dietmar; Humphreys, Glyn W.

2010-01-01

Four experiments examined the effects of precues on visual search for targets defined by a color-orientation conjunction. Experiment 1 showed that cueing the identity of targets enhanced the efficiency of search. Cueing effects were stronger with color than with orientation cues, but this advantage was additive across array size. Experiment 2…

Orientations of terminal cladodes of Platyopuntias

Energy Technology Data Exchange (ETDEWEB)

Nobel, P.S.

1982-01-01

The orientations of terminal unshaded cladodes of 23 species of platyopuntias were observed in North America, South America, Australia, and Israel. When the seasonality of rainfall favored cladode development in the winter and the site was located above 27/sup 0/N, the cladodes tended to face north-south (five cases, P < .001 for each). In all other cases without topographical blockage of incoming radiation, the tendency was to face east-west. For example, terminal cladodes of Opuntia phaeacantha var. discata and O. stricta tended to face north-south in Israel but east-west in the United States (P > .001). Such dissimilar orientation patterns also occurred for cladodes of 0. chlorotica at two sites in the Sonoran Desert and for O. basilaris var. basilaris developing at different seasons at a single site. Contrary to previously published observations, cladodes of O. ficus-indica and O. compressa had a significant tendency to orient (P > .001). When topographical features affected the direction of prevailing photosynthetically active radiation (PAR), the preferred orientation of terminal cladodes was changed accordingly. The preferred direction always maximized the interception of PAR, which is often a limiting factor in the productivity of cacti, even in a putatively high radiation environment.

ORIENTATION FIELD RECONSTRUCTION OF ALTERED FINGERPRINT USING ORTHOGONAL WAVELETS

Directory of Open Access Journals (Sweden)

Mini M.G.

2016-11-01

Full Text Available Ridge orientation field is an important feature for fingerprint matching and fingerprint reconstruction. Matching of the altered fingerprint against its unaltered mates can be done by extracting the available features in the altered fingerprint and using it along with approximated ridge orientation. This paper presents a method for approximating ridge orientation field of altered fingerprints. In the proposed method, sine and cosine of doubled orientation of the fingerprint is decomposed using orthogonal wavelets and reconstructed back using only the approximation coefficients. No prior information about the singular points is needed for orientation approximation. The method is found suitable for orientation estimation of low quality fingerprint images also.

Comparison study of thickness swell performance of commercial oriented strandboard flooring products

Science.gov (United States)

Hongmei Gu; Siqun Wang; Trairat Neimsuwan; Sunguo Wang

2005-01-01

The multiple layer structure of oriented strandboard (OSB) has a significant influence on its performance, including thickness swell (TS). TS is recognized as an important performance property for OSB products. Optimization of TS through layer property ma- nipulation to achieve the lowest total TS while maintaining acceptable mechanical properties is attainable if the...

The Influence of Physical Fatigue on Work on a Production Line

Directory of Open Access Journals (Sweden)

Kołodziej Sabina

2017-09-01

Full Text Available The purpose of this study is to determine the factors having impacts on the physical fatigue of employees and to analyse its influence on work on a production line. In order to carry out these objectives, a comprehensive research was conducted in a medium enterprise producing processed fruit and vegetable products. Air temperature and humidity tests, employee survey, production line productivity measurements, and other observations were performed. Large variations in temperature and humidity were observed during the analysed period. Analysing the survey results, attention was paid to the declared length of sleeping of employees after each shift, the time when they feel fatigue and the factors that, according to respondents, have the greatest impact on the work performed. Attempts were made to determine the wellbeing of employees and to indicate the disturbing symptoms. Special attention was paid to the negative phenomena felt by respondents. The main factors affecting the physical fatigue of employees were identified and described. We sought to explain the impacts of physical fatigue on work on the production line. Improvements, which should help to reduce fatigue and improve working conditions, have been proposed. The analysis provided interesting information that could be used in various food manufacturing companies.

Developing Product Lines with 3rd-party components

NARCIS (Netherlands)

De Jonge, M.

2007-01-01

The trends toward product line development and toward adopting more 3rd-party software are hard to combine. The reason is that productlines demand fine control over the software (e.g., for diversity management), while 3rd-party software (almost by definition) provides only little or no control. A

Integrating Theory and Practice: Applying the Quality Improvement Paradigm to Product Line Engineering

Science.gov (United States)

Stark, Michael; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

My assertion is that not only are product lines a relevant research topic, but that the tools used by empirical software engineering researchers can address observed practical problems. Our experience at NASA has been there are often externally proposed solutions available, but that we have had difficulties applying them in our particular context. We have also focused on return on investment issues when evaluating product lines, and while these are important, one can not attain objective data on success or failure until several applications from a product family have been deployed. The use of the Quality Improvement Paradigm (QIP) can address these issues: (1) Planning an adoption path from an organization's current state to a product line approach; (2) Constructing a development process to fit the organization's adoption path; (3) Evaluation of product line development processes as the project is being developed. The QIP consists of the following six steps: (1) Characterize the project and its environment; (2) Set quantifiable goals for successful project performance; (3) Choose the appropriate process models, supporting methods, and tools for the project; (4) Execute the process, analyze interim results, and provide real-time feedback for corrective action; (5) Analyze the results of completed projects and recommend improvements; and (6) Package the lessons learned as updated and refined process models. A figure shows the QIP in detail. The iterative nature of the QIP supports an incremental development approach to product lines, and the project learning and feedback provide the necessary early evaluations.

Remodularizing Java programs for comprehension of features

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2009-01-01

. In absence of these mechanisms, feature implementations tend to be scattered and tangled in terms of object-oriented abstractions, making the code implementing features difficult to locate and comprehend. In this paper we present a semi-automatic method for feature-oriented remodularization of Java programs....... Our method uses execution traces to locate implementations of features, and Java packages to establish explicit feature modules. To evaluate usefulness of the approach, we present a case study where we apply our method to two real-world software systems. The obtained results indicate a significant...

Modal Transition Systems as the Basis for Interface Theories and Product Lines

DEFF Research Database (Denmark)

Nyman, Ulrik

and a subset of modal transition systems is proved. The developed interface theory, which can describe liveness properties, is also applied as a behavioral variability theory for product line development. The two last papers of the thesis concern themselves with modal and mixed transition systems. The first....... It also proves PSPACE-hardness for consistency of mixed specifications and establishes a number of reductions between the different decision problems. Keywords: Modeling, Software Product Lines, Embedded Software, Modal Refinement, Labeled Transition Systems, Modal Transition Systems, Mixed Transition......This thesis presents research taking its outset in component-based software development, interface theory and software product lines, as well as modeling formalisms for describing component based software systems and their interfaces. The main part of the thesis consists of five papers. The first...

This Specialty Line of Clothing Really Is the "Bee's Knees"

Science.gov (United States)

Hollingsworth, Jan Carter

2009-01-01

This article features "Bee's Knees," a specialty line of clothing. While not the typical product one would think of when considering mobility equipment, this line of clothing certainly does aid in helping those with disabilities access their world more safely and comfortably. "Bee's Knees" offers pint-sized pants made of kid-friendly, durable…

Plenoptic background oriented schlieren imaging

International Nuclear Information System (INIS)

Klemkowsky, Jenna N; Fahringer, Timothy W; Clifford, Christopher J; Thurow, Brian S; Bathel, Brett F

2017-01-01

The combination of the background oriented schlieren (BOS) technique with the unique imaging capabilities of a plenoptic camera, termed plenoptic BOS, is introduced as a new addition to the family of schlieren techniques. Compared to conventional single camera BOS, plenoptic BOS is capable of sampling multiple lines-of-sight simultaneously. Displacements from each line-of-sight are collectively used to build a four-dimensional displacement field, which is a vector function structured similarly to the original light field captured in a raw plenoptic image. The displacement field is used to render focused BOS images, which qualitatively are narrow depth of field slices of the density gradient field. Unlike focused schlieren methods that require manually changing the focal plane during data collection, plenoptic BOS synthetically changes the focal plane position during post-processing, such that all focal planes are captured in a single snapshot. Through two different experiments, this work demonstrates that plenoptic BOS is capable of isolating narrow depth of field features, qualitatively inferring depth, and quantitatively estimating the location of disturbances in 3D space. Such results motivate future work to transition this single-camera technique towards quantitative reconstructions of 3D density fields. (paper)

Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

Science.gov (United States)

Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

For the love of learning science: Connecting learning orientation and career productivity in physics and chemistry

Directory of Open Access Journals (Sweden)

Robert H. Tai

2010-05-01

Full Text Available An individual’s motivational orientation serves as a drive to action and can influence their career success. This study examines how goal orientation toward the pursuit of a graduate degree in physics and chemistry influences later success outcomes of practicing physicists and chemists. Two main categories of goal orientation are examined in this paper: performance orientation or motivation to demonstrate one’s ability or performance to others, and learning orientation or motivation through the desire to learn about a topic. The data were obtained as part of Project Crossover, a mixed-methods study which focused on studying the transition from graduate student to scientist in the physical sciences and included a survey of members of two national professional physical science organizations. Using regression analysis on data from 2353 physicists and chemists, results indicate that physicists and chemists who reported a learning orientation as their motivation for going to graduate school were more productive, in terms of total career primary and/or first-author publications and grant funding, than those reporting a performance orientation. Furthermore, given equal salary, learning-oriented individuals produced more primary and/or first-author publications than their nonlearning oriented counterparts.

Products of Snowflaked Euclidean Lines Are Not Minimal for Looking Down

Directory of Open Access Journals (Sweden)

Joseph Matthieu

2017-11-01

Full Text Available We show that products of snowflaked Euclidean lines are not minimal for looking down. This question was raised in Fractured fractals and broken dreams, Problem 11.17, by David and Semmes. The proof uses arguments developed by Le Donne, Li and Rajala to prove that the Heisenberg group is not minimal for looking down. By a method of shortcuts, we define a new distance d such that the product of snowflaked Euclidean lines looks down on (RN , d, but not vice versa.

Integrated configurable equipment selection and line balancing for mass production with serial-parallel machining systems

Science.gov (United States)

Battaïa, Olga; Dolgui, Alexandre; Guschinsky, Nikolai; Levin, Genrikh

2014-10-01

Solving equipment selection and line balancing problems together allows better line configurations to be reached and avoids local optimal solutions. This article considers jointly these two decision problems for mass production lines with serial-parallel workplaces. This study was motivated by the design of production lines based on machines with rotary or mobile tables. Nevertheless, the results are more general and can be applied to assembly and production lines with similar structures. The designers' objectives and the constraints are studied in order to suggest a relevant mathematical model and an efficient optimization approach to solve it. A real case study is used to validate the model and the developed approach.

SPECIFIC FEATURES OF DEVELOPMENT OF ORGANIC PRODUCTS MARKET IN UKRAINE

Directory of Open Access Journals (Sweden)

T. Kharchenko

2013-08-01

Full Text Available The article is dedicated to the development of new and improvement of existing theoretical and methodological basis of forming and developing the market of organic products, its correspondence to the present-day situation, determination of problems and ways of their solving, introduction in practical activity of Ukrainian enterprises. The main objective of the article is to determine the specific features of forming and developing organic products market in Ukraine, and the perspective directions of its development based on analysis and practice of functioning of such markets in the world. The environmentally sound products market in the world is being analyzed, some information on the countries with the most commodity turnover of organic products, structure of international market of organic products, volumes of sales of organic products in the European countries is provided. As a result of studying the modern trends of economic development the authors reach a conclusion on problems of standard introduction, investigate the European norms and requirements for organic products. The conducted research allows distinguishing the basic features of Ukrainian market of organic products: it quickly grows, which makes it especially appealing for the participants of market relations, however entry into this market requires considerable capital investments and is characterized by high risk; criteria for qualifying products as environmentally sound products are unstructured and unclear. The potential for growth of organic products market in Ukraine is examined.

Oriented solid-state NMR spectrosocpy

DEFF Research Database (Denmark)

Bertelsen, Kresten

This thesis is concerned with driving forward oriented solid-state NMR spectroscopy as a viable technique for studying peptides in membrane bilayers. I will show that structural heterogeneity is an intrinsic part of the peptide/lipid system and that NMR can be used to characterize static...... and dynamic structural features of the peptides and its local surroundings. In fact one need to take into account the dynamical features of the system in order to correctly predict the structure from oriented solid-state NMR spectra.      ...

Extracting product features and opinion words using pattern knowledge in customer reviews.

Science.gov (United States)

Htay, Su Su; Lynn, Khin Thidar

2013-01-01

Due to the development of e-commerce and web technology, most of online Merchant sites are able to write comments about purchasing products for customer. Customer reviews expressed opinion about products or services which are collectively referred to as customer feedback data. Opinion extraction about products from customer reviews is becoming an interesting area of research and it is motivated to develop an automatic opinion mining application for users. Therefore, efficient method and techniques are needed to extract opinions from reviews. In this paper, we proposed a novel idea to find opinion words or phrases for each feature from customer reviews in an efficient way. Our focus in this paper is to get the patterns of opinion words/phrases about the feature of product from the review text through adjective, adverb, verb, and noun. The extracted features and opinions are useful for generating a meaningful summary that can provide significant informative resource to help the user as well as merchants to track the most suitable choice of product.

Extracting Product Features and Opinion Words Using Pattern Knowledge in Customer Reviews

Directory of Open Access Journals (Sweden)

Su Su Htay

2013-01-01

Full Text Available Due to the development of e-commerce and web technology, most of online Merchant sites are able to write comments about purchasing products for customer. Customer reviews expressed opinion about products or services which are collectively referred to as customer feedback data. Opinion extraction about products from customer reviews is becoming an interesting area of research and it is motivated to develop an automatic opinion mining application for users. Therefore, efficient method and techniques are needed to extract opinions from reviews. In this paper, we proposed a novel idea to find opinion words or phrases for each feature from customer reviews in an efficient way. Our focus in this paper is to get the patterns of opinion words/phrases about the feature of product from the review text through adjective, adverb, verb, and noun. The extracted features and opinions are useful for generating a meaningful summary that can provide significant informative resource to help the user as well as merchants to track the most suitable choice of product.

Extracting Product Features and Opinion Words Using Pattern Knowledge in Customer Reviews

Science.gov (United States)

Lynn, Khin Thidar

2013-01-01

Due to the development of e-commerce and web technology, most of online Merchant sites are able to write comments about purchasing products for customer. Customer reviews expressed opinion about products or services which are collectively referred to as customer feedback data. Opinion extraction about products from customer reviews is becoming an interesting area of research and it is motivated to develop an automatic opinion mining application for users. Therefore, efficient method and techniques are needed to extract opinions from reviews. In this paper, we proposed a novel idea to find opinion words or phrases for each feature from customer reviews in an efficient way. Our focus in this paper is to get the patterns of opinion words/phrases about the feature of product from the review text through adjective, adverb, verb, and noun. The extracted features and opinions are useful for generating a meaningful summary that can provide significant informative resource to help the user as well as merchants to track the most suitable choice of product. PMID:24459430

Using contract mechanisms to coordinate product line decisions

NARCIS (Netherlands)

Nalla, V.R.; Venugopal, V.; Veen, van der J.A.A.

2008-01-01

In this paper we design contract mechanisms to increase the efficiency of product line decisions in a Supply Chain (SC). A two stage SC with a buyer and the supplier is considered. The end consumers are comprised of two segments with different willingness to pay. The final demand and the segments’

A Role-Playing Game for a Software Engineering Lab: Developing a Product Line

Science.gov (United States)

Zuppiroli, Sara; Ciancarini, Paolo; Gabbrielli, Maurizio

2012-01-01

Software product line development refers to software engineering practices and techniques for creating families of similar software systems from a basic set of reusable components, called shared assets. Teaching how to deal with software product lines in a university lab course is a challenging task, because there are several practical issues that…

Customizable Time-Oriented Visualizations

DEFF Research Database (Denmark)

Kuhail, Mohammad Amin; Pantazos, Kostas; Lauesen, Søren

2012-01-01

Most commercial visualization tools support an easy and quick creation of conventional time-oriented visualizations such as line charts, but customization is limited. In contrast, some academic visualization tools and programming languages support the creation of some customizable time......-oriented visualizations but it is time consuming and hard. To combine efficiency, the effort required to develop a visualization, and customizability, the ability to tailor a visualization, we developed time-oriented building blocks that address the specifics of time (e.g. linear vs. cyclic or point-based vs. interval......-based) and consist of inner customizable parts (e.g. ticks). A combination of the time-oriented and other primitive graphical building blocks allowed the creation of several customizable advanced time-oriented visualizations. The appearance and behavior of the blocks are specified using spreadsheet-like formulas. We...

Hope voor het MKB : goede resultaten na toepassing Human Oriented Production Engineering (HOPE)

NARCIS (Netherlands)

Verweij, M.J.

1997-01-01

De doorlooptijd werd 40% korter, de kwaliteitsproblemen namen af en de voorraden slonken met een kwart. Het Belgische bedrijf Verhaegen was zeer tevreden over de resultaten van de methode HOPE (Human Oriented Production Engineering). Dit Europeese project richt zich op het midden- en kleinbedrijf.

Aguide to Matlab object-oriented programming

CERN Document Server

Register, Andy H

2007-01-01

This is the first book to deliver broad coverage of the documented and undocumented object-oriented features of MATLAB®. Unlike the typical approach of other resources, this guide explains why each feature is important, demonstrates how each feature is used, and promotes an understanding of the interactions between features.

Product Line Enabled Intelligent Mobile Middleware

DEFF Research Database (Denmark)

Zhang, Weishan; Kunz, Thomas; Hansen, Klaus Marius

2007-01-01

research project called PLIMM that focuses on user-centered application scenarios. PLIMM is designed based on software product line ideas which make it possible for specialized customization and optimization for different purposes and hardware/software platforms. To enable intelligence, the middleware...... needs access to a range of context models. We model these contexts with OWL, focusing on user-centered concepts. The basic building block of PLIMM is the enhanced BDI agent where OWL context ontology logic reasoning will add indirect beliefs to the belief sets. Our approach also addresses the handling...

Research of Control System and Fault Diagnosis of the Sound-absorbing Board Production Line

Directory of Open Access Journals (Sweden)

Yanjun Xiao

2014-08-01

Full Text Available Programmable Logic Controller is the core of the control system of the sound- absorbing board production line and the design of fault diagnosis is an essential modules in the sound- absorbing board production line. The article discourses the application of PLC in the control system of the production line, and designs the methods of grading treatment and prevention of troubles, which makes use of PLC’S logic functions. The method has good expansibility, and has good guidance to the fault diagnosis in other automation equipments.

A software product line approach to enhance a meta-scheduler middleware

International Nuclear Information System (INIS)

Scheidt, Rafael F; Schmidt, Katreen; Pessoa, Gabriel M; Viera, Matheus A; Dantas, Mario

2012-01-01

Software Projects in general tend to get more software reuse and componentization in order to reduce time, cost and new products resources. The need for techniques and tools to organize projects of higher quality in less time is one of the greatest challenges of Software Engineering. The Software Product Line is proposed to organize and systematically assist the development of new products in series at the same domain. In this context, this paper is proposed to apply the Software Product Line approach in Distributed Computing Environments. In projects that involve Distributed Environments, each version of the same product can generate repeatedly the same artifacts in a product that evolves its characteristics; however there is a principal architecture with variations of components. The goal of the proposed approach is to analyze the actual process and propose a new approach to develop new projects reusing the whole architecture, components and documents, starting with a solid base and creating new products focusing in new functionalities. We expect that with the application of this approach give support to the development of projects in Distributed Computing Environment.

Prominent feature extraction for review analysis: an empirical study

Science.gov (United States)

Agarwal, Basant; Mittal, Namita

2016-05-01

Sentiment analysis (SA) research has increased tremendously in recent times. SA aims to determine the sentiment orientation of a given text into positive or negative polarity. Motivation for SA research is the need for the industry to know the opinion of the users about their product from online portals, blogs, discussion boards and reviews and so on. Efficient features need to be extracted for machine-learning algorithm for better sentiment classification. In this paper, initially various features are extracted such as unigrams, bi-grams and dependency features from the text. In addition, new bi-tagged features are also extracted that conform to predefined part-of-speech patterns. Furthermore, various composite features are created using these features. Information gain (IG) and minimum redundancy maximum relevancy (mRMR) feature selection methods are used to eliminate the noisy and irrelevant features from the feature vector. Finally, machine-learning algorithms are used for classifying the review document into positive or negative class. Effects of different categories of features are investigated on four standard data-sets, namely, movie review and product (book, DVD and electronics) review data-sets. Experimental results show that composite features created from prominent features of unigram and bi-tagged features perform better than other features for sentiment classification. mRMR is a better feature selection method as compared with IG for sentiment classification. Boolean Multinomial Naïve Bayes) algorithm performs better than support vector machine classifier for SA in terms of accuracy and execution time.

Parameters Investigation of Mathematical Model of Productivity for Automated Line with Availability by DMAIC Methodology

Directory of Open Access Journals (Sweden)

Tan Chan Sin

2014-01-01

Full Text Available Automated line is widely applied in industry especially for mass production with less variety product. Productivity is one of the important criteria in automated line as well as industry which directly present the outputs and profits. Forecast of productivity in industry accurately in order to achieve the customer demand and the forecast result is calculated by using mathematical model. Mathematical model of productivity with availability for automated line has been introduced to express the productivity in terms of single level of reliability for stations and mechanisms. Since this mathematical model of productivity with availability cannot achieve close enough productivity compared to actual one due to lack of parameters consideration, the enhancement of mathematical model is required to consider and add the loss parameters that is not considered in current model. This paper presents the investigation parameters of productivity losses investigated by using DMAIC (Define, Measure, Analyze, Improve, and Control concept and PACE Prioritization Matrix (Priority, Action, Consider, and Eliminate. The investigated parameters are important for further improvement of mathematical model of productivity with availability to develop robust mathematical model of productivity in automated line.

Statistical Study of the Magnetic Field Orientation in Solar Filaments

Science.gov (United States)

Hanaoka, Yoichiro; Sakurai, Takashi

2017-12-01

We have carried out a statistical study of the average orientation of the magnetic field in solar filaments with respect to their axes for more than 400 samples, based on data taken with daily full-Sun, full-Stokes spectropolarimetric observations using the He I 1083.0 nm line. The major part of the samples are the filaments in the quiet areas, but those in the active areas are included as well. The average orientation of the magnetic field in filaments shows a systematic property depending on the hemisphere; the direction of the magnetic field in filaments in the northern (southern) hemisphere mostly deviates clockwise (counterclockwise) from their axes, which run along the magnetic polarity inversion line. The deviation angles of the magnetic field from the axes are concentrated between 10° and 30°. This hemispheric pattern is consistent with that revealed for chirality of filament barbs, filament channels, and for other solar features found to possess chirality. For some filaments, it was confirmed that their magnetic field direction is locally parallel to their structure seen in Hα images. Our results for the first time confirmed this hemispheric pattern with the direct observation of the magnetic field in filaments. Interestingly, the filaments which show the opposite magnetic field deviation to the hemispheric pattern, are in many cases found above the polarity inversion line whose ambient photospheric magnetic field has the polarity alignment being opposite to that of active regions following the Hale–Nicholson law.

Systematic Derivation of Static Analyses for Software Product Lines

DEFF Research Database (Denmark)

Midtgaard, Jan; Brabrand, Claus; Wasowski, Andrzej

2014-01-01

A recent line of work lifts particular verification and analysis methods to Software Product Lines (SPL). In an effort to generalize such case-by-case approaches, we develop a systematic methodology for lifting program analyses to SPLs using abstract interpretation. Abstract interpretation...... for lifting analyses and Galois connections. We prove that for analyses developed using our method, the soundness of lifting follows by construction. Finally, we discuss approximating variability in an analysis and we derive variational data-flow equations for an example analysis, a constant propagation...

A tangent subsolar merging line

International Nuclear Information System (INIS)

Crooker, N.U.; Siscoe, G.L.; Toffoletto, F.R.

1990-01-01

The authors describe a global magnetospheric model with a single subsolar merging line whose position is determined neither locally by the relative orientations and strengths of the merging fields nor globally by the orientation of a separator line--the governing parameters of most previous models--but by the condition of tangential contact between the external field and the magnetopause. As in previous models, the tilt of the merging line varies with IMF orientation, but here it also depends upon the ratio of Earth's magnetic flux that leaks out of the magnetopause to IMF flux that penetrates in. In the limiting case treated by Alekseyev and Belen'kaya, with no leakage of Earth's field and total IMF penetration, the merging line forms a great circle around a spherical magnetosphere where undeviated IMF lines lie tangent to its surface. This tangent merging line lies perpendicular to the IMF. They extend their work to the case of finite leakage and partial penetration, which distort the IMF into a draped pattern, thus changing the locus of tangency to the sphere. In the special case where the penetrating IMF flux is balanced by an equal amount of Earth flux leakage, the tangent merging line bisects the angle between the IMF and Earth's northward subsolar field. This result is identical to the local merging line model result for merging fields with equal magnitude. Here a global flux balance condition replaces the local equal magnitude condition

Feature-based engineering of compensations in web service environment

DEFF Research Database (Denmark)

Schaefer, Michael; Dolog, Peter

2009-01-01

In this paper, we introduce a product line approach for developing Web services with extended compensation capabilities. We adopt a feature modelling approach in order to describe variable and common compensation properties of Web service variants, as well as service consumer application...

Verifying Architectural Design Rules of the Flight Software Product Line

Science.gov (United States)

Ganesan, Dharmalingam; Lindvall, Mikael; Ackermann, Chris; McComas, David; Bartholomew, Maureen

2009-01-01

This paper presents experiences of verifying architectural design rules of the NASA Core Flight Software (CFS) product line implementation. The goal of the verification is to check whether the implementation is consistent with the CFS architectural rules derived from the developer's guide. The results indicate that consistency checking helps a) identifying architecturally significant deviations that were eluded during code reviews, b) clarifying the design rules to the team, and c) assessing the overall implementation quality. Furthermore, it helps connecting business goals to architectural principles, and to the implementation. This paper is the first step in the definition of a method for analyzing and evaluating product line implementations from an architecture-centric perspective.

Product-oriented Software Certification Process for Software Synthesis

Science.gov (United States)

Nelson, Stacy; Fischer, Bernd; Denney, Ewen; Schumann, Johann; Richardson, Julian; Oh, Phil

2004-01-01

The purpose of this document is to propose a product-oriented software certification process to facilitate use of software synthesis and formal methods. Why is such a process needed? Currently, software is tested until deemed bug-free rather than proving that certain software properties exist. This approach has worked well in most cases, but unfortunately, deaths still occur due to software failure. Using formal methods (techniques from logic and discrete mathematics like set theory, automata theory and formal logic as opposed to continuous mathematics like calculus) and software synthesis, it is possible to reduce this risk by proving certain software properties. Additionally, software synthesis makes it possible to automate some phases of the traditional software development life cycle resulting in a more streamlined and accurate development process.

The U-line line balancing problem

NARCIS (Netherlands)

Miltenburg, G.J.; Wijngaard, J.

1994-01-01

The traditional line balancing (LB) problem considers a production line in which stations are arranged consecutively in a line. A balance is determined by grouping tasks into stations while moving forward (or backward) through a precedence network. Recently many production lines are being arranged

Experimental on-line platform for product conceptual design: OpenDesigNet

Directory of Open Access Journals (Sweden)

Teresa Magal-Royo

2013-09-01

Full Text Available This paper highlights the need for using specialised on-line collaborative environments by designers and product engineers who increasingly use Web 2.0 technology to search for information. Although there are professional channels and networks, there is no specific platform which helps during a new product’s conceptualisation phase. Open communication must thus be promoted and encouraged amongst design professionals and companies to form working groups thereby allowing them to work collaboratively in the most open and creative phase of product design, i.e. conceptualisation. The OpenDesigNet (ODN experimental platform has been developed so that designers and small- or medium-sized companies (SMC can access on-line collaborative tools to support the creation and promotion of new on-line products and assess their immediate social impact. This article presents some of the results obtained during the validation phase involving a platform satisfaction survey of design engineering students and has led to a first-hand assessment of the new platform’s potential impact on their professional future.

Benefit salience and consumers' selective attention to product features

OpenAIRE

Ratneshwar, S; Warlop, Luk; Mick, DG; Seeger, G

1997-01-01

Although attention is a key construct in models of marketing communication and consumer choice, its selective nature has rarely been examined in common time-pressured conditions. We focus on the role of benefit salience, that is, the readiness with which particular benefits are brought to mind by consumers in relation to a given product category. Study I demonstrated that when product feature information was presented rapidly, individuals for whom the benefit of personalised customer service ...

A high degree of LINE-1 hypomethylation is a unique feature of early-onset colorectal cancer.

Directory of Open Access Journals (Sweden)

Marina Antelo

Full Text Available Early-onset colorectal cancer (CRC represents a clinically distinct form of CRC that is often associated with a poor prognosis. Methylation levels of genomic repeats such as LINE-1 elements have been recognized as independent factors for increased cancer-related mortality. The methylation status of LINE-1 elements in early-onset CRC has not been analyzed previously.We analyzed 343 CRC tissues and 32 normal colonic mucosa samples, including 2 independent cohorts of CRC diagnosed ≤ 50 years old (n=188, a group of sporadic CRC >50 years (MSS n=89; MSI n=46, and a group of Lynch syndrome CRCs (n=20. Tumor mismatch repair protein expression, microsatellite instability status, LINE-1 and MLH1 methylation, somatic BRAF V600E mutation, and germline MUTYH mutations were evaluated.Mean LINE-1 methylation levels (± SD in the five study groups were early-onset CRC, 56.6% (8.6; sporadic MSI, 67.1% (5.5; sporadic MSS, 65.1% (6.3; Lynch syndrome, 66.3% (4.5 and normal mucosa, 76.5% (1.5. Early-onset CRC had significantly lower LINE-1 methylation than any other group (p<0.0001. Compared to patients with <65% LINE-1 methylation in tumors, those with ≥ 65% LINE-1 methylation had significantly better overall survival (p=0.026, log rank test.LINE-1 hypomethylation constitutes a potentially important feature of early-onset CRC, and suggests a distinct molecular subtype. Further studies are needed to assess the potential of LINE-1 methylation status as a prognostic biomarker for young people with CRC.

Potential Errors and Test Assessment in Software Product Line Engineering

Directory of Open Access Journals (Sweden)

Hartmut Lackner

2015-04-01

Full Text Available Software product lines (SPL are a method for the development of variant-rich software systems. Compared to non-variable systems, testing SPLs is extensive due to an increasingly amount of possible products. Different approaches exist for testing SPLs, but there is less research for assessing the quality of these tests by means of error detection capability. Such test assessment is based on error injection into correct version of the system under test. However to our knowledge, potential errors in SPL engineering have never been systematically identified before. This article presents an overview over existing paradigms for specifying software product lines and the errors that can occur during the respective specification processes. For assessment of test quality, we leverage mutation testing techniques to SPL engineering and implement the identified errors as mutation operators. This allows us to run existing tests against defective products for the purpose of test assessment. From the results, we draw conclusions about the error-proneness of the surveyed SPL design paradigms and how quality of SPL tests can be improved.

77 FR 48550 - Technicolor Creative Services, Post Production Feature Mastering Division Including On-Site...

Science.gov (United States)

2012-08-14

... Services, Post Production Feature Mastering Division Including On-Site Leased Workers From Ajilon... Services, Post Production Feature Mastering Division, Hollywood, California (subject firm). The worker... the workers meet the eligibility requirements of the Trade Act of 1974. Conclusion After careful...

Feasibility evaluations for the integration of laser butt welding of tubes in industrial pipe coil production lines

Science.gov (United States)

Penasa, Mauro; Colombo, Enrico; Giolfo, Mauro

1994-09-01

Due to the good performance shown by laser welded joints, to the quality and repeatability achievable by this welding technique and to its high process productivity, a feature inherent to the laser technology which, together with its high flexibility, allows different operations to be performed by a single source, consistent savings in a production line may be obtained. Therefore laser welding techniques may be of high relevance for industrial applications, provided that a sufficient attention is paid to avoiding a low utilization time to the operating laser source. The paper describes a feasibility study for the integration of a laser source as an automatic unit for circumferential butt welding of tubes in production lines of pipe coils, just before the cold bending station. Using a 6 kW CO2 source, thickness ranging from 3.5 to 11.2 mm in carbon, low alloyed Cr-Mo and austenitic stainless steels, have been successfully welded. Cr-Mo steels require on line preheating treatment, which however can be achieved by laser defocused passes just before welding. The results of the preliminary qualification performed on laser welded joints of the involved topologies of product (materials, diameters and thicknesses) are described together with technological tests required for approval: laser circumferential butt welding of tubes has proven to be effective, with satisfactory and repeatable results and good joint performances. An exhaustive comparison with current welding techniques (TIG, MIG) is then carried out, along with a detailed analysis of the potential advantages and benefits which may be expected by using the laser welding technique, as well as with a first estimation of the investments and running costs. Since laser productivity is saturated only at a rough 35% during the year, an accurate analysis of other possible applications and of a possible lay out of a laser working cell integrated in the factory production lines is performed. Usually little attention is

The 'Double-Edged Sword' of high-feature products: an explorative study of the business impact

NARCIS (Netherlands)

Keijzers, J.; Ouden, den P.H.; Lu, Y.

2008-01-01

In high-technology consumer markets, manufacturers integrate a growing number of technologies and features to satisfy consumers' preference for high-feature products. At the same time, companies report an increasing number of consumer complaints and even product returns, not due to product faults

A dynamic programming algorithm for the buffer allocation problem in homogeneous asymptotically reliable serial production lines

Directory of Open Access Journals (Sweden)

Diamantidis A. C.

2004-01-01

Full Text Available In this study, the buffer allocation problem (BAP in homogeneous, asymptotically reliable serial production lines is considered. A known aggregation method, given by Lim, Meerkov, and Top (1990, for the performance evaluation (i.e., estimation of throughput of this type of production lines when the buffer allocation is known, is used as an evaluative method in conjunction with a newly developed dynamic programming (DP algorithm for the BAP. The proposed algorithm is applied to production lines where the number of machines is varying from four up to a hundred machines. The proposed algorithm is fast because it reduces the volume of computations by rejecting allocations that do not lead to maximization of the line's throughput. Numerical results are also given for large production lines.

Predicting borderline personality disorder features from personality traits, identity orientation, and attachment styles in Italian nonclinical adults: issues of consistency across age ranges.

Science.gov (United States)

Fossati, Andrea; Borroni, Serena; Feeney, Judith; Maffei, Cesare

2012-04-01

The aims of this study were to assess whether Borderline Personality Disorder (BPD) features could be predicted by Big Five traits, impulsivity, identity orientation, and adult attachment patterns in a sample of 1,192 adult nonclinical participants, and to evaluate the consistency of these regression models across four age groups (49 years, and >50 years, respectively). In the full sample, measures of neuroticism (N), impulsivity, and anxious insecure attachment were substantial predictors of BPD features (adjusted R(2) = .38, p personality traits and disturbed attachment patterns.

Using Software Product Line to improve ERP Engineering: Literature Review and Analysis

Directory of Open Access Journals (Sweden)

Raúl Mazo

2014-10-01

Full Text Available On the one hand, getting advantages of Enterprise Resource Planning (ERP systems largely depends on their capacity to be configured and adapted to fit the customer and domain requirements. On the other hand, product line engineering (PLE is a promising approach for configuring and adapting products by means of configuration and derivation processes. While the literature and industrial experiences show the benefits of PLE methods, techniques and tools, there is still a lack of interest in addressing ERP engineering issues with the product line strategy. Objective: The aim of this paper is to identify and analyze the different ways presented in the literature to improve ERP engineering issues with the methods, techniques and tools provided by PLE. Method: To achieve that objective, we reviewed the literature and analyzed available publications. Results: This literature review analyzes six research papers at the intersection between ERP and PLE. It shows that the product line strategy can indeed be applied for ERP configuration and customization. It further shows the evolving interest on this topic and discusses existing contributions.

Implementation of Neutronics Analysis Code using the Features of Object Oriented Programming via Fortran90/95

Energy Technology Data Exchange (ETDEWEB)

Han, Tae Young; Cho, Beom Jin [KEPCO Nuclear Fuel, Daejeon (Korea, Republic of)

2011-05-15

The object-oriented programming (OOP) concept was radically established after 1990s and successfully involved in Fortran 90/95. The features of OOP are such as the information hiding, encapsulation, modularity and inheritance, which lead to producing code that satisfy three R's: reusability, reliability and readability. The major OOP concepts, however, except Module are not mainly used in neutronics analysis codes even though the code was written by Fortran 90/95. In this work, we show that the OOP concept can be employed to develop the neutronics analysis code, ASTRA1D (Advanced Static and Transient Reactor Analyzer for 1-Dimension), via Fortran90/95 and those can be more efficient and reasonable programming methods

40 CFR 1051.301 - When must I test my production-line vehicles or engines?

Science.gov (United States)

2010-07-01

... vehicles or engines? 1051.301 Section 1051.301 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.301 When must I test my production-line vehicles or engines? (a...

Transmission Line Security Monitor: Final Report

Energy Technology Data Exchange (ETDEWEB)

John Svoboda

2011-04-01

The Electric Power Transmission Line Security Monitor System Operational Test is a project funded by the Technical Support Working Group (TSWG). TSWG operates under the Combating Terrorism Technical Support Office that functions under the Department of Defense. The Transmission Line Security Monitor System is based on technology developed by Idaho National Laboratory. The technology provides a means for real-time monitoring of physical threats and/or damage to electrical transmission line towers and conductors as well as providing operational parameters to transmission line operators to optimize transmission line operation. The end use is for monitoring long stretches of transmission lines that deliver electrical power from remote generating stations to cities and industry. These transmission lines are generally located in remote transmission line corridors where security infrastructure may not exist. Security and operational sensors in the sensor platform on the conductors take power from the transmission line and relay security and operational information to operations personnel hundreds of miles away without relying on existing infrastructure. Initiated on May 25, 2007, this project resulted in pre-production units tested in realistic operational environments during 2010. A technology licensee, Lindsey Manufacturing of Azusa California, is assisting in design, testing, and ultimately production. The platform was originally designed for a security monitoring mission, but it has been enhanced to include important operational features desired by electrical utilities.

The role of off-line and online strategies for successful product positioning

OpenAIRE

Yaneva D. E.; Zlateva D. A.

2015-01-01

The study of the article is done on off-line and online strategies that companies use for their successful positioning. The goal is to establish the role and the significance of the strategies for successful product positioning in off-line and online environment.

A PRODUCTIVITY EVALUATION MODEL BASED ON INPUT AND OUTPUT ORIENTATIONS

Directory of Open Access Journals (Sweden)

C.O. Anyaeche

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Many productivity models evaluate either the input or the output performances using standalone techniques. This sometimes gives divergent views of the same system’s results. The work reported in this article, which simultaneously evaluated productivity from both orientations, was applied on real life data. The results showed losses in productivity (–2% and price recovery (–8% for the outputs; the inputs showed productivity gain (145% but price recovery loss (–63%. These imply losses in product performances but a productivity gain in inputs. The loss in the price recovery of inputs indicates a problem in the pricing policy. This model is applicable in product diversification.

AFRIKAANSE OPSOMMING: Die meeste produktiwiteitsmodelle evalueer of die inset- of die uitsetverrigting deur gebruik te maak van geïsoleerde tegnieke. Dit lei soms tot uiteenlopende perspektiewe van dieselfde sisteem se verrigting. Hierdie artikel evalueer verrigting uit beide perspektiewe en gebruik ware data. Die resultate toon ‘n afname in produktiwiteit (-2% en prysherwinning (-8% vir die uitsette. Die insette toon ‘n toename in produktiwiteit (145%, maar ‘n afname in prysherwinning (-63%. Dit impliseer ‘n afname in produkverrigting, maar ‘n produktiwiteitstoename in insette. Die afname in die prysherwinning van insette dui op ‘n problem in die prysvasstellingbeleid. Hierdie model is geskik vir produkdiversifikasie.

Comparison of performance on process- and product-oriented assessments of fundamental motor skills across childhood.

Science.gov (United States)

Logan, Samuel W; Barnett, Lisa M; Goodway, Jacqueline D; Stodden, David F

2017-04-01

Process-oriented motor competence (MC) assessments evaluate how a movement is performed. Product-oriented assessments evaluate the outcome of a movement. Determining the concurrent validity of process and product assessments is important to address the predictive utility of motor competence for health. The current study aimed to: (1) compare process and product assessments of the standing long jump, hop and throw across age groups and (2) determine the capacity of process assessments to classify levels of MC. Participants included 170 children classified into three age groups: 4-5, 7-8 and 10-11 years old. Participants' skills were examined concurrently using three process assessments ((Test of Gross Motor Development-2nd edition [TGMD-2]), Get Skilled; Get Active, and developmental sequences) and one product measure (throw speed, jump and hop distance). Results indicate moderate to strong correlations between (1) process assessments across skills and age groups (r range = .37-70) and (2) process and product assessments across skills and age groups (r range = .26-.88). In general, sensitivity to detect advanced skill level is lowest for TGMD-2 and highest for developmental sequences for all three skills. The use of process and product assessments is suggested to comprehensively capture levels of MC in human movement.

Feature Extraction in Sequential Multimedia Images: with Applications in Satellite Images and On-line Videos

Science.gov (United States)

Liang, Yu-Li

Multimedia data is increasingly important in scientific discovery and people's daily lives. Content of massive multimedia is often diverse and noisy, and motion between frames is sometimes crucial in analyzing those data. Among all, still images and videos are commonly used formats. Images are compact in size but do not contain motion information. Videos record motion but are sometimes too big to be analyzed. Sequential images, which are a set of continuous images with low frame rate, stand out because they are smaller than videos and still maintain motion information. This thesis investigates features in different types of noisy sequential images, and the proposed solutions that intelligently combined multiple features to successfully retrieve visual information from on-line videos and cloudy satellite images. The first task is detecting supraglacial lakes above ice sheet in sequential satellite images. The dynamics of supraglacial lakes on the Greenland ice sheet deeply affect glacier movement, which is directly related to sea level rise and global environment change. Detecting lakes above ice is suffering from diverse image qualities and unexpected clouds. A new method is proposed to efficiently extract prominent lake candidates with irregular shapes, heterogeneous backgrounds, and in cloudy images. The proposed system fully automatize the procedure that track lakes with high accuracy. We further cooperated with geoscientists to examine the tracked lakes and found new scientific findings. The second one is detecting obscene content in on-line video chat services, such as Chatroulette, that randomly match pairs of users in video chat sessions. A big problem encountered in such systems is the presence of flashers and obscene content. Because of various obscene content and unstable qualities of videos capture by home web-camera, detecting misbehaving users is a highly challenging task. We propose SafeVchat, which is the first solution that achieves satisfactory

Students' Demand for Smartphones: Structural Relationships of Product Features, Brand Name, Product Price and Social Infuence

Science.gov (United States)

Suki, Norazah Mohd

2013-01-01

Purpose: The study aims to examine structural relationships of product features, brand name, product price and social influence with demand for Smartphones among Malaysian students'. Design/methodology/approach: Data collected from 320 valid pre-screened university students studying at the pubic higher learning institution in Federal Territory of…

Ethanol production from lignocellulosic materials. Fermentation and on-line analysis

Energy Technology Data Exchange (ETDEWEB)

Olsson, L.

1994-04-01

The fermentation performance of bacteria, yeast and fungi was investigated in lignocellulosic hydrolysates with the aim of finding microorganisms which both withstand the inhibitors and that have the ability to ferment pentoses. Firstly, the performance of Saccharomyces cidri, Saccharomyces cerevisiae, Lactobacillus brevis, Lactococcus lactis ssp lactis, Escherichia coli and Zymomonas mobilis was investigated in spent sulphite liquor and enzymatic hydrolysate of steam-pretreated willow. Secondly, the performance of natural and recombinant E. coli, Pichia stipitis, recombinant S. cerevisiae, S. cerevisiae in combination with xylose isomerase and Fusarium oxysporum was investigated in a xylose-rich acid hydrolysate of corn cob. Recombinant E. coli was the best alternative for fermentation of lignocellulosic hydrolysates, giving both high yields and productivities. The main drawback was that detoxification was necessary. The kinetics of the fermentation with recombinant E. coli KO11 was investigated in the condensate of steam-pretreated willow. A cost analysis of the ethanol production from willow was made, which predicted an ethanol production cost of 3.9 SEK/l for the pentose fermentation. The detoxification cost constituted 22% of this cost. The monitoring of three monosaccharides and ethanol in lignocellulosic hydro lysates is described. The monosaccharides were determined using immobilized pyranose oxidase in an on-line amperometric analyser. Immobilization and characterization of pyranose oxidase from Phanerochaete chrysosporium is also described. The ethanol was monitored on-line using a micro dialysis probe as an in situ sampling device. The dialysate components were then separated in a column liquid chromatographic system and the ethanol was selectively detected by an amperometric alcohol bio sensor. The determinations with on-line analysis methods agreed well with off-line methods. 248 refs, 4 figs, 12 tabs

Feasibility Study for Installing Machine in Production Line to Avoid Particle Contamination Based on CFD Simulation

Science.gov (United States)

Khaokom, Adisorn; Thongsri, Jatuporn

2017-10-01

Ventilation system inside production line for electronic component production needs to meet the factory standard. Because it can eliminate small particles which may cause of human or machine in production as well as it can distribute the circulating air temperature uniformly. CFD is used in this research in order to study the feasibility and plan for machine layout in production line before actual installation. The simulation shows the airflow in every area inside production line. From simulation with releasing the particles from human and machine is found that this ventilation system generates airflow that makes most particles float out of the machines and no particle downs to the conveyor, it results to contamination. In addition, the simulation also shows the range of 19-26 °C air temperature that meets the factory standard. The results of this research are the parts of the data to renovate the production line to get more efficiency and proper on the production.

Illustrative Line Styles for Flow Visualization

NARCIS (Netherlands)

Everts, Maarten H.; Bekker, Hendrik; Roerdink, Jos B. T. M.; Isenberg, Tobias

2011-01-01

We present a flexible illustrative line style model for the visualization of streamline data. Our model partitions view-oriented line strips into parallel bands whose basic visual properties can be controlled independently. We thus extend previous line stylization techniques specifically for

Flow Visualization using Illustrative Line Styles

NARCIS (Netherlands)

Everts, Maarten H.; Bekker, Hendrik; Roerdink, Jos B. T. M.; Isenberg, Tobias; Bekker, Paulus

2011-01-01

We present a flexible illustrative line style model for the visualization of streamline data. Our model partitions view- oriented line strips into parallel bands whose basic visual properties can be controlled independently. We thus extend previous line stylization techniques specifically for

A Collaboration-Oriented M2M Messaging Mechanism for the Collaborative Automation between Machines in Future Industrial Networks

Directory of Open Access Journals (Sweden)

Zhaozong Meng

2017-11-01

Full Text Available Machine-to-machine (M2M communication is a key enabling technology for industrial internet of things (IIoT-empowered industrial networks, where machines communicate with one another for collaborative automation and intelligent optimisation. This new industrial computing paradigm features high-quality connectivity, ubiquitous messaging, and interoperable interactions between machines. However, manufacturing IIoT applications have specificities that distinguish them from many other internet of things (IoT scenarios in machine communications. By highlighting the key requirements and the major technical gaps of M2M in industrial applications, this article describes a collaboration-oriented M2M (CoM2M messaging mechanism focusing on flexible connectivity and discovery, ubiquitous messaging, and semantic interoperability that are well suited for the production line-scale interoperability of manufacturing applications. The designs toward machine collaboration and data interoperability at both the communication and semantic level are presented. Then, the application scenarios of the presented methods are illustrated with a proof-of-concept implementation in the PicknPack food packaging line. Eventually, the advantages and some potential issues are discussed based on the PicknPack practice.

The degradation of lining of rotary furnaces in the production of zinc oxide

Directory of Open Access Journals (Sweden)

Natália Luptáková

2014-06-01

Full Text Available This paper is closely connected with the complex problem of degradation relating to the refractories of rotary furnace linings in the production of zinc oxide. Zinc oxide can be produced by variety of ways, but the most common method of production which is used in Europe is indirect, i.e. pyrolytic combustion of zinc. This method is also called "French process" of manufacturing ZnO. But this mentioned method of preparation leads to the creation of the enormous amount of zinc slag including chemical complexes of elements Fe, Zn and Al. The mechanism of degradation of the lining leads to slag rests and it is closely connected with the mutual interaction of the aggressive agents with the components of the lining. This process creates a new undesired surface layer which increased the overall thickness of zinc slag. Stuck slag has the influence on rapid degradation of the linings and moreover it also decreases the production quality of ZnO. Analysis results introduced in this paper are significant information for minimizing of degradation of rotary furnaces.  

Service-oriented innovation in R&D

NARCIS (Netherlands)

Fisscher, O.A.M.; Wognum, P.M.

2002-01-01

In this article, the concept of service orientation in R&D is explored. Three forms of service-orientation are discussed integrated products, service offering, and service competence. The first form, integrated products, addresses the development of complex integrated products in which service

40 CFR 1051.305 - How must I prepare and test my production-line vehicles or engines?

Science.gov (United States)

2010-07-01

... production-line vehicles or engines? 1051.305 Section 1051.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.305 How must I prepare and test my production...

"They're Pretty Much Made for Blunts": Product Features That Facilitate Marijuana Use Among Young Adult Cigarillo Users in the United States.

Science.gov (United States)

Giovenco, Daniel P; Miller Lo, Erin J; Lewis, M Jane; Delnevo, Cristine D

2017-11-01

Cigarillo use is prevalent among young adults in the United States. Many young people use cigarillos as "blunts," a term for a cigar emptied of its tobacco and replaced with marijuana. Because cigars in the United States are not subject to the same regulations as cigarettes, they offer a diverse selection of flavors and packaging styles. It is unclear how these and other product attributes facilitate blunt use. Semi-structured telephone interviews were conducted with a sample of 40 young adult cigar or cigarillo users in the United States to assess patterns of use and perceptions about product features. Quotations from interview transcripts were coded for major themes and summarized across participants. Regardless of their preferred brand, participants felt that the brand Black & Mild is primarily smoked for the tobacco. There was a strong perception, however, that other popular cigarillo brands are almost always used to make blunts. Participants believed that cigarillo companies design their products to simplify blunt-making, with features such as perforated lines or wrappings that unroll easily. Resealable foil pouches, a popular packaging style, are often used to hold unused marijuana and mask its smell. Blunt use is pervasive among young adult cigarillo users in the United States, and certain cigar companies have developed products that facilitate blunt-making. Future surveillance measures should capture the extent to which cigarillo users are using these products as blunts. Continued surveillance of cigarillo sales and popular product attributes are needed. Cigarillo use is prevalent among young adults in the United States, many of whom are using the products as blunts. This study found that product features such as brand, flavor, packaging, and price influence the selection of cigarillos used for this purpose. There is also a strong perception among young adult cigarillo users that cigarillo companies design their products and packaging to make the blunt

Spontaneous pyrogen production by mouse histiocytic and myelomonocytic tumor cell lines in vitro.

Science.gov (United States)

Bodel, P

1978-05-01

Tumor-associated fever occurs commonly in acute leukemias and lymphomas. We investigated the capacity for in vitro production of pyrogen by three mouse histiocytic lymphoma cell lines (J-774, PU5-1.8, p 388 D1), one myelomonoyctic line (WEHI-3), and tow lymphoma-derived lines, RAW-8 and R-8. Pyrogen was released spontaneously into the culture medium during growth by all cell lines with macrophage or myeloid characteristics including lysozyme production; R-8 cells, of presumed B-lymphocyte origin, did not produce pyrogen. When injected into mice, the pyrogens gave fever curves typical of endogenous pyrogen, were inactived by heating to 56 degrees C and by pronase digestion, and appeared to be secreted continuously by viable cells. Two pyrogenic molecular species produced by H-774 cells were identified by Sephadex filtration, one of mol wt approximately equal to 30,000, and the other greater than or equal to 60,000. By contrast, three carcinoma cell lines of human origin and SV-40 3T3 mouse fibroblasts did not produce pyrogen in vitro. These results suggest that some malignant cells derived from phagocytic cells of bone marrow origin retain their capacity for pyrogen production, and may spontaneously secrete pyrogen during growth.

Attentional Selection of Feature Conjunctions Is Accomplished by Parallel and Independent Selection of Single Features.

Science.gov (United States)

Andersen, Søren K; Müller, Matthias M; Hillyard, Steven A

2015-07-08

Experiments that study feature-based attention have often examined situations in which selection is based on a single feature (e.g., the color red). However, in more complex situations relevant stimuli may not be set apart from other stimuli by a single defining property but by a specific combination of features. Here, we examined sustained attentional selection of stimuli defined by conjunctions of color and orientation. Human observers attended to one out of four concurrently presented superimposed fields of randomly moving horizontal or vertical bars of red or blue color to detect brief intervals of coherent motion. Selective stimulus processing in early visual cortex was assessed by recordings of steady-state visual evoked potentials (SSVEPs) elicited by each of the flickering fields of stimuli. We directly contrasted attentional selection of single features and feature conjunctions and found that SSVEP amplitudes on conditions in which selection was based on a single feature only (color or orientation) exactly predicted the magnitude of attentional enhancement of SSVEPs when attending to a conjunction of both features. Furthermore, enhanced SSVEP amplitudes elicited by attended stimuli were accompanied by equivalent reductions of SSVEP amplitudes elicited by unattended stimuli in all cases. We conclude that attentional selection of a feature-conjunction stimulus is accomplished by the parallel and independent facilitation of its constituent feature dimensions in early visual cortex. The ability to perceive the world is limited by the brain's processing capacity. Attention affords adaptive behavior by selectively prioritizing processing of relevant stimuli based on their features (location, color, orientation, etc.). We found that attentional mechanisms for selection of different features belonging to the same object operate independently and in parallel: concurrent attentional selection of two stimulus features is simply the sum of attending to each of those

An overview of means-end theory: potential application in consumer-oriented food product design

NARCIS (Netherlands)

Costa, A.I.A.; Dekker, M.; Jongen, W.M.F.

2004-01-01

This paper presents an overview of the means-end chain theory and associated techniques, and discusses the virtues and shortcomings of its potential application in consumer-oriented food product design. This overview, based on literature in the food area, presents also the process of conducting a

Genetic comparison of milk production and composition in three maternal rabbit lines

Directory of Open Access Journals (Sweden)

Ayman Gamal Fawzy EL Nagar

2014-12-01

Full Text Available The aim of this study was to compare 3 Spanish maternal rabbit lines (A, V and LP in terms of milk production and composition. These lines were founded on different criteria but selected for litter size at weaning. A total of 194 mature does in their third or higher parity were used. The milk yield of does was recorded at 1, 2, 3, 4, 8, 9, 10, 11, 15, 16 and 17 d post-partum (dpp. The milk production traits studied were weekly milk yield (WMY; g/wk and milk conversion ratio (MCR; grams of litter gain per grams of milk suckled during the first 21  dpp. The milk composition traits studied were fat (%, protein  (%, ash (%, lactose (% and total solids (%. The milk samples to be analysed were collected from each doe at 18 dpp. Data were analysed using single trait mixed and fixed models with and without covariates; the covariates were number born alive (NBA and doe weight at kindling (DW. The overall mean of WMY, during the first 3 wk, was 1547±16 g/wk. Milk yields during the different lactation weeks were for line A 872±39, 1503±39 and 1865±39 g for first, second and third lactation weeks, respectively. In line V, the corresponding values were 919±35, 1633±35 and 2004±35  g, and in line LP, they were 1043±36, 1819±36 and 2254±36  g. Means of MCR were 0.41±0.01, 0.41±0.01 and 0.42±0.01 for A, V and LP lines, respectively. Overall means of fat, protein, ash, lactose and total solids (% were 14.62±0.17, 11.10±0.07, 1.89±0.04, 2.67±0.12 and 30.27±0.24, respectively. The differences between lines for milk production traits were significant except for MCR, while the differences between lines for milk composition traits were not significant. NBA had significant effects on all milk yield traits but had no significant effects on milk composition traits. DW only had a significant effect on weekly milk yield. The parity order had no significant effect either for milk production traits or milk composition traits in multiparous does, except

Experimental and modelling study of the effect of airflow orientation with respect to strip electrode on ozone production of surface dielectric barrier discharge

Science.gov (United States)

Mikeš, J.; Pekárek, S.; Soukup, I.

2016-11-01

This study examines the effect of airflow orientation with respect to the strip active electrode on concentration of ozone and nitrogen dioxide produced in a planar generator based on the surface dielectric barrier discharge. The orientation of the airflow was tested in parallel and perpendicular with respect to the strips. It was found that in the investigated range of average discharge power, the ozone concentration increases approximately by 25% when airflow was oriented in parallel with respect to the strips in comparison with perpendicular orientation of the airflow. Similarly the increase of nitrogen dioxide concentration was observed for parallel orientation of the airflow with respect to the strips in comparison with the perpendicular orientation of the airflow. Within the range of wavelengths from 250 to 1100 nm, the changes of intensities of spectral lines associated with airflow orientation have been observed. A 3D numerical model describing ion trajectories and airflow patterns have also been developed.

Limitations and Implications of Product-, Sales- and Market-Oriented Political Parties: Evidence for Public Affairs

DEFF Research Database (Denmark)

Ormrod, Robert P.

2011-01-01

This paper provides the first literature review of work using Lees-Marshment’s product-oriented party (POP), salesoriented party (SOP) and market-oriented party (MOP) process models with the aims of assessing the models’ usefulness to academics, practitioners and educators. This is motivated...... by an urgent need to evaluate models that claim to balance explanatory power, practical applicability and pedagogic value. Our literature review demonstrates that although the process models can be used in a classroom setting, empirical results are ambivalent as to the usefulness and even existence of the MOP...

PolSAR Land Cover Classification Based on Roll-Invariant and Selected Hidden Polarimetric Features in the Rotation Domain

Directory of Open Access Journals (Sweden)

Chensong Tao

2017-07-01

Full Text Available Land cover classification is an important application for polarimetric synthetic aperture radar (PolSAR. Target polarimetric response is strongly dependent on its orientation. Backscattering responses of the same target with different orientations to the SAR flight path may be quite different. This target orientation diversity effect hinders PolSAR image understanding and interpretation. Roll-invariant polarimetric features such as entropy, anisotropy, mean alpha angle, and total scattering power are independent of the target orientation and are commonly adopted for PolSAR image classification. On the other aspect, target orientation diversity also contains rich information which may not be sensed by roll-invariant polarimetric features. In this vein, only using the roll-invariant polarimetric features may limit the final classification accuracy. To address this problem, this work uses the recently reported uniform polarimetric matrix rotation theory and a visualization and characterization tool of polarimetric coherence pattern to investigate hidden polarimetric features in the rotation domain along the radar line of sight. Then, a feature selection scheme is established and a set of hidden polarimetric features are selected in the rotation domain. Finally, a classification method is developed using the complementary information between roll-invariant and selected hidden polarimetric features with a support vector machine (SVM/decision tree (DT classifier. Comparison experiments are carried out with NASA/JPL AIRSAR and multi-temporal UAVSAR data. For AIRSAR data, the overall classification accuracy of the proposed classification method is 95.37% (with SVM/96.38% (with DT, while that of the conventional classification method is 93.87% (with SVM/94.12% (with DT, respectively. Meanwhile, for multi-temporal UAVSAR data, the mean overall classification accuracy of the proposed method is up to 97.47% (with SVM/99.39% (with DT, which is also higher

Towards transdisciplinarity in Arctic sustainability knowledge co-production: Socially-Oriented Observations as a participatory integrated activity

Science.gov (United States)

Vlasova, Tatiana; Volkov, Sergey

2016-09-01

The paper is an attempt to tie together main biogeophysical and social science projects under the auspice of interdisciplinary sustainability science development. Special attention is put to the necessity of the transdisciplinary knowledge co-production based on activities and problem-solutions approaches. It puts attention to the role of monitoring activities in sustainability interdisciplinary science and transdisciplinary knowledge evolution in the Arctic. Socially focused monitoring named Socially-Oriented Observations creating a transdisciplinary space is viewed as one of sources of learning and transformations towards sustainability making possible to shape rapid changes happening in the Arctic based on sustainability knowledge co-production. Continuous Socially-Oriented Observations integrating scientific, education and monitoring methods enables to define adaptation and transformation pathways in the Arctic - the most rapidly changing region of our planet. Socially-Oriented Observations are based on the existing and developing interdisciplinary scientific approaches emerged within natural science and social science projects, sustainable development and resilience concepts putting principle attention to building sustainable and resilient socio-ecological systems. It is argued that the Arctic sustainability science is a valuable component of the whole and broader system of the Arctic Sustainability knowledge co-produced with the help of transdisciplinary approaches integrating science, local/traditional knowledge, entrepreneurship, education, decision-making. Socially-Oriented Observations are designed to be a transdisciplinary interactive continuous participatory process empowering deliberate choices of people that can shape the changes and enable transformation towards sustainability. Approaches of Socially-Oriented Observations and methods of implementation that have been developed since the IPY 2007/2008 and being practiced in different regions of the

Validation techniques for object-oriented proof outlines

NARCIS (Netherlands)

Pierik, C.

2006-01-01

This thesis presents a proof outline logic for a simple object-oriented programming language. The language has all object-oriented features of popular programming languages like Java and C#. In particular, it supports inheritance, field shadowing, aliasing, dynamic object creation, subtype

DPLFW: a Framework for the Product-Line-Based Generation of Variable Content Documents

OpenAIRE

Gómez , Abel; Martí , Pau; Penadés , M. Carmen; Canós , José H.

2014-01-01

International audience; Document Product Lines (DPL) is a document engineering methodology that applies product-line engineering principles to the gen-eration of documents in high variability contexts and with high reuse of components. Instead of standalone documents, DPL promotes the defi-nition of families of documents where the members share some common content while differ in other parts. The key for the definition is the avail-ability of a collection of content assets which can be parame...

Biometric feature extraction using local fractal auto-correlation

International Nuclear Information System (INIS)

Chen Xi; Zhang Jia-Shu

2014-01-01

Image texture feature extraction is a classical means for biometric recognition. To extract effective texture feature for matching, we utilize local fractal auto-correlation to construct an effective image texture descriptor. Three main steps are involved in the proposed scheme: (i) using two-dimensional Gabor filter to extract the texture features of biometric images; (ii) calculating the local fractal dimension of Gabor feature under different orientations and scales using fractal auto-correlation algorithm; and (iii) linking the local fractal dimension of Gabor feature under different orientations and scales into a big vector for matching. Experiments and analyses show our proposed scheme is an efficient biometric feature extraction approach. (condensed matter: structural, mechanical, and thermal properties)

A Feature Selection Method Based on Fisher's Discriminant Ratio for Text Sentiment Classification

Science.gov (United States)

Wang, Suge; Li, Deyu; Wei, Yingjie; Li, Hongxia

With the rapid growth of e-commerce, product reviews on the Web have become an important information source for customers' decision making when they intend to buy some product. As the reviews are often too many for customers to go through, how to automatically classify them into different sentiment orientation categories (i.e. positive/negative) has become a research problem. In this paper, based on Fisher's discriminant ratio, an effective feature selection method is proposed for product review text sentiment classification. In order to validate the validity of the proposed method, we compared it with other methods respectively based on information gain and mutual information while support vector machine is adopted as the classifier. In this paper, 6 subexperiments are conducted by combining different feature selection methods with 2 kinds of candidate feature sets. Under 1006 review documents of cars, the experimental results indicate that the Fisher's discriminant ratio based on word frequency estimation has the best performance with F value 83.3% while the candidate features are the words which appear in both positive and negative texts.

Using Simplified Thermal Inertia to Determine the Theoretical Dry Line in Feature Space for Evapotranspiration Retrieval

Directory of Open Access Journals (Sweden)

Sujuan Mi

2015-08-01

Full Text Available With the development of quantitative remote sensing, regional evapotranspiration (ET modeling based on the feature space has made substantial progress. Among those feature space based evapotranspiration models, accurate determination of the dry/wet lines remains a challenging task. This paper reports the development of a new model, named DDTI (Determination of Dry line by Thermal Inertia, which determines the theoretical dry line based on the relationship between the thermal inertia and the soil moisture. The Simplified Thermal Inertia value estimated in the North China Plain is consistent with the value measured in the laboratory. Three evaluation methods, which are based on the comparison of the locations of the theoretical dry line determined by two models (DDTI model and the heat energy balance model, the comparison of ET results, and the comparison of the evaporative fraction between the estimates from the two models and the in situ measurements, were used to assess the performance of the new model DDTI. The location of the theoretical dry line determined by DDTI is more reasonable than that determined by the heat energy balance model. ET estimated from DDTI has an RMSE (Root Mean Square Error of 56.77 W/m2 and a bias of 27.17 W/m2; while the heat energy balance model estimated ET with an RMSE of 83.36 W/m2 and a bias of −38.42 W/m2. When comparing the coeffcient of determination for the two models with the observations from Yucheng, DDTI demonstrated ET with an R2 of 0.9065; while the heat energy balance model has an R2 of 0.7729. When compared with the in situ measurements of evaporative fraction (EF at Yucheng Experimental Station, the ET model based on DDTI reproduces the pixel scale EF with an RMSE of 0.149, much lower than that based on the heat energy balance model which has an RMSE of 0.220. Also, the EF bias between the DDTI model and the in situ measurements is 0.064, lower than the EF bias of the heat energy balance model

Wolf-Rayet stars featured in emission-line galaxies

International Nuclear Information System (INIS)

Kunth, D.

1982-01-01

In the galaxy Tololo 3 (NGC 3125) recent observations by the author and Sargent (1981) have revealed the presence of an unusual strong and broad He II 4686 emission. The origin of this line together with some nitrogen lines (e.g. N V 4620 and N III 4638) is attributed to Wolf-Rayet stars, mostly of WN types. (Auth.)

School food environment: Quality and advertisement frequency of child-oriented packaged products within walking distance of public schools.

Science.gov (United States)

Missbach, Benjamin; Pachschwöll, Caterina; Kuchling, Daniel; König, Jürgen

2017-06-01

Food marketing for children is a major concern for public health nutrition and many schools make efforts to increase healthy eating. Food environments surrounding schools in urban areas may undermine these efforts for healthy nutrition within school programs. Our study aim is to describe the nutrition environment within walking distance of schools in terms of food quality and food marketing and to explore the degree to which elements of the nutrition environment varies by proximity to schools. In a cross-sectional study, we analyzed the surrounding food environments of a convenience sample of 46 target schools within 950m walking distance in 7 different urban districts across Vienna, Austria. In total, we analyzed data from 67 fast food outlets and 54 supermarkets analyzing a total of 43.129 packaged snack food and beverage products, from which 85% were for adults and 15% of the products were child-oriented. Proximity to the schools did not affect the availability of child-oriented products and dedicated food advertisements for children. After applying nutrient profiling using the Nutrient Profiling Model (NPM) on child-oriented products, results showed that 15.8% of the packaged snack food were categorized as "healthy" foods and 84.2% as "less healthy"; for beverages 65.7% were categorized as "healthy" and 34.3% as "less healthy". In conclusion, our results show that child-oriented snacks are not more frequently advertised around schools but substantially lack in nutritional quality with the potential to undermine efforts for promoting healthy eating practices within schools.

School food environment: Quality and advertisement frequency of child-oriented packaged products within walking distance of public schools

Directory of Open Access Journals (Sweden)

Benjamin Missbach

2017-06-01

Full Text Available Food marketing for children is a major concern for public health nutrition and many schools make efforts to increase healthy eating. Food environments surrounding schools in urban areas may undermine these efforts for healthy nutrition within school programs. Our study aim is to describe the nutrition environment within walking distance of schools in terms of food quality and food marketing and to explore the degree to which elements of the nutrition environment varies by proximity to schools. In a cross-sectional study, we analyzed the surrounding food environments of a convenience sample of 46 target schools within 950m walking distance in 7 different urban districts across Vienna, Austria. In total, we analyzed data from 67 fast food outlets and 54 supermarkets analyzing a total of 43.129 packaged snack food and beverage products, from which 85% were for adults and 15% of the products were child-oriented. Proximity to the schools did not affect the availability of child-oriented products and dedicated food advertisements for children. After applying nutrient profiling using the Nutrient Profiling Model (NPM on child-oriented products, results showed that 15.8% of the packaged snack food were categorized as “healthy” foods and 84.2% as “less healthy”; for beverages 65.7% were categorized as “healthy” and 34.3% as “less healthy”. In conclusion, our results show that child-oriented snacks are not more frequently advertised around schools but substantially lack in nutritional quality with the potential to undermine efforts for promoting healthy eating practices within schools.

Three Object-Oriented enhancement for EPICS

Science.gov (United States)

Osberg, E. A.; Dohan, D. A.; Richter, R.; Biggs, R.; Chillara, K.; Wade, D.; Bossom, J.

1994-12-01

In line with our group's intention of producing software using, where possible, Object-Oriented methodologies and techniques in the development of RF control systems, we have undertaken three projects to enhance the EPICS software environment. Two of the projects involve interfaces to EPICs Channel Access from Object-Oriented languages. The third is an enhancement to the EPICS State Notation Language to better support the Shlaer-Mellor Object-Oriented Analysis and Design Methodology. This paper discusses the motivation, approaches, results and future directions of these three projects.

Mining consumer reviews to generate ratings of different product attributes while producing feature-based review-summary

Science.gov (United States)

Kangale, Akshay; Krishna Kumar, S.; Arshad Naeem, Mohd; Williams, Mark; Tiwari, M. K.

2016-10-01

With the massive growth of the internet, product reviews increasingly serve as an important source of information for customers to make choices online. Customers depend on these reviews to understand users' experience, and manufacturers rely on this user-generated content to capture user sentiments about their product. Therefore, it is in the best interest of both customers and manufacturers to have a portal where they can read a complete comprehensive summary of these reviews in minimum time. With this in mind, we arrived at our first objective which is to generate a feature-based review-summary. Our second objective is to develop a predictive model to know the next week's product sales based on numerical review ratings and textual features embedded in the reviews. When it comes to product features, every user has different priorities for different features. To capture this aspect of decision-making, we have designed a new mechanism to generate a numerical rating for every feature of the product individually. The data have been collected from a well-known commercial website for two different products. The validation of the model is carried out using a crowd-sourcing technique.

Selective enhancement of orientation tuning before saccades.

Science.gov (United States)

Ohl, Sven; Kuper, Clara; Rolfs, Martin

2017-11-01

Saccadic eye movements cause a rapid sweep of the visual image across the retina and bring the saccade's target into high-acuity foveal vision. Even before saccade onset, visual processing is selectively prioritized at the saccade target. To determine how this presaccadic attention shift exerts its influence on visual selection, we compare the dynamics of perceptual tuning curves before movement onset at the saccade target and in the opposite hemifield. Participants monitored a 30-Hz sequence of randomly oriented gratings for a target orientation. Combining a reverse correlation technique previously used to study orientation tuning in neurons and general additive mixed modeling, we found that perceptual reports were tuned to the target orientation. The gain of orientation tuning increased markedly within the last 100 ms before saccade onset. In addition, we observed finer orientation tuning right before saccade onset. This increase in gain and tuning occurred at the saccade target location and was not observed at the incongruent location in the opposite hemifield. The present findings suggest, therefore, that presaccadic attention exerts its influence on vision in a spatially and feature-selective manner, enhancing performance and sharpening feature tuning at the future gaze location before the eyes start moving.

POINT CLOUD ORIENTED SHOULDER LINE EXTRACTION IN LOESS HILLY AREA

Directory of Open Access Journals (Sweden)

L. Min

2016-06-01

Full Text Available Shoulder line is the significant line in hilly area of Loess Plateau in China, dividing the surface into positive and negative terrain (P-N terrains. Due to the point cloud vegetation removal methods of P-N terrains are different, there is an imperative need for shoulder line extraction. In this paper, we proposed an automatic shoulder line extraction method based on point cloud. The workflow is as below: (i ground points were selected by using a grid filter in order to remove most of noisy points. (ii Based on DEM interpolated by those ground points, slope was mapped and classified into two classes (P-N terrains, using Natural Break Classified method. (iii The common boundary between two slopes is extracted as shoulder line candidate. (iv Adjust the filter gird size and repeat step i-iii until the shoulder line candidate matches its real location. (v Generate shoulder line of the whole area. Test area locates in Madigou, Jingbian County of Shaanxi Province, China. A total of 600 million points are acquired in the test area of 0.23km2, using Riegl VZ400 3D Laser Scanner in August 2014. Due to the limit Granted computing performance, the test area is divided into 60 blocks and 13 of them around the shoulder line were selected for filter grid size optimizing. The experiment result shows that the optimal filter grid size varies in diverse sample area, and a power function relation exists between filter grid size and point density. The optimal grid size was determined by above relation and shoulder lines of 60 blocks were then extracted. Comparing with the manual interpretation results, the accuracy of the whole result reaches 85%. This method can be applied to shoulder line extraction in hilly area, which is crucial for point cloud denoising and high accuracy DEM generation.

Point Cloud Oriented Shoulder Line Extraction in Loess Hilly Area

Science.gov (United States)

Min, Li; Xin, Yang; Liyang, Xiong

2016-06-01

Shoulder line is the significant line in hilly area of Loess Plateau in China, dividing the surface into positive and negative terrain (P-N terrains). Due to the point cloud vegetation removal methods of P-N terrains are different, there is an imperative need for shoulder line extraction. In this paper, we proposed an automatic shoulder line extraction method based on point cloud. The workflow is as below: (i) ground points were selected by using a grid filter in order to remove most of noisy points. (ii) Based on DEM interpolated by those ground points, slope was mapped and classified into two classes (P-N terrains), using Natural Break Classified method. (iii) The common boundary between two slopes is extracted as shoulder line candidate. (iv) Adjust the filter gird size and repeat step i-iii until the shoulder line candidate matches its real location. (v) Generate shoulder line of the whole area. Test area locates in Madigou, Jingbian County of Shaanxi Province, China. A total of 600 million points are acquired in the test area of 0.23km2, using Riegl VZ400 3D Laser Scanner in August 2014. Due to the limit Granted computing performance, the test area is divided into 60 blocks and 13 of them around the shoulder line were selected for filter grid size optimizing. The experiment result shows that the optimal filter grid size varies in diverse sample area, and a power function relation exists between filter grid size and point density. The optimal grid size was determined by above relation and shoulder lines of 60 blocks were then extracted. Comparing with the manual interpretation results, the accuracy of the whole result reaches 85%. This method can be applied to shoulder line extraction in hilly area, which is crucial for point cloud denoising and high accuracy DEM generation.

Parallel object-oriented term rewriting : the booleans

NARCIS (Netherlands)

Rodenburg, P.H.; Vrancken, J.L.M.

As a first case study in parallel object-oriented term rewriting, we give two implementations of term rewriting algorithms for boolean terms, using the parallel object-oriented features of the language Pool-T. The term rewriting systems are specified in the specification formalism

Basic Test Framework for the Evaluation of Text Line Segmentation and Text Parameter Extraction

Directory of Open Access Journals (Sweden)

Darko Brodić

2010-05-01

Full Text Available Text line segmentation is an essential stage in off-line optical character recognition (OCR systems. It is a key because inaccurately segmented text lines will lead to OCR failure. Text line segmentation of handwritten documents is a complex and diverse problem, complicated by the nature of handwriting. Hence, text line segmentation is a leading challenge in handwritten document image processing. Due to inconsistencies in measurement and evaluation of text segmentation algorithm quality, some basic set of measurement methods is required. Currently, there is no commonly accepted one and all algorithm evaluation is custom oriented. In this paper, a basic test framework for the evaluation of text feature extraction algorithms is proposed. This test framework consists of a few experiments primarily linked to text line segmentation, skew rate and reference text line evaluation. Although they are mutually independent, the results obtained are strongly cross linked. In the end, its suitability for different types of letters and languages as well as its adaptability are its main advantages. Thus, the paper presents an efficient evaluation method for text analysis algorithms.

Study of improvement of indices maize line to establish their position in hybrids

Directory of Open Access Journals (Sweden)

Oxana DIRZU-COCOS

2015-12-01

Full Text Available Corn (Zea mays L. crop that is grown on large areas - over 140 million hectares worldwide, and 400-500 thousand ha in Moldova due to production potential broad diversity of use as food for humans, animals, birds raw material for industrial processing. The upward trend in average yields achieved is largely attributed to the improvement of scientific programs. Select the line with the characters and traits that are transmitted hereditary hybrids and contribute to their performance, ensure progress in improvement. Therefore, the process of creating inbred lines associated with combining ability testing as a measure of productivity conferred hybrids, is significant research programs. Orientation purpose of improved maize hybrids to formulas and simple change to a superior capitalization heterosis effect and perfect uniformity of plant requires changes in methodology for the creation, evaluation and classification of inbred lines.

Object-Oriented Type Systems

DEFF Research Database (Denmark)

Schwartzbach, Michael Ignatieff; Palsberg, Jens

a type system that generalizes and explains them. The theory is based on an idealized object-oriented language called BOPL (Basic Object Programming Language), containing common features of the above languages. A type system, type inference algorithm, and typings of inheritance and genericity......Object-Oriented Type Systems Jens Palsberg and Michael I. Schwartzbach Aarhus University, Denmark Type systems are required to ensure reliability and efficiency of software. For object-oriented languages, typing is an especially challenging problem because of inheritance, assignment, and late...... are provided for BOPL. Throughout, the results are related to the languages on which BOPL is based. This text offers advanced undergraduates and professional software developers a sound understanding of the key aspects of object-oriented type systems. All algorithms are implemented in a freely available...

Grating Oriented Line-Wise Filtration (GOLF) for Dual-Energy X-ray CT

Science.gov (United States)

Xi, Yan; Cong, Wenxiang; Harrison, Daniel; Wang, Ge

2017-12-01

In medical X-ray Computed Tomography (CT), the use of two distinct X-ray source spectra (energies) allows dose-reduction and material discrimination relative to that achieved with only one source spectrum. Existing dual-energy CT methods include source kVp-switching, double-layer detection, dual-source gantry, and two-pass scanning. Each method suffers either from strong spectral correlation or patient-motion artifacts. To simultaneously address these problems, we propose to improve CT data acquisition with the Grating Oriented Line-wise Filtration (GOLF) method, a novel X-ray filter that is placed between the source and patient. GOLF uses a combination of absorption and filtering gratings that are moved relative to each other and in synchronization with the X-ray tube kVp-switching process and/or the detector view-sampling process. Simulation results show that GOLF can improve the spectral performance of kVp-switching to match that of dual-source CT while avoiding patient motion artifacts and dual imaging chains. Although significant flux is absorbed by this pre-patient filter, the proposed GOLF method is a novel path for cost-effectively extracting dual-energy or multi-energy data and reducing radiation dose with or without kVp switching.

Methionine sulfoximine supplementation enhances productivity in GS-CHOK1SV cell lines through glutathione biosynthesis.

Science.gov (United States)

Feary, Marc; Racher, Andrew J; Young, Robert J; Smales, C Mark

2017-01-01

In Lonza Biologics' GS Gene Expression System™, recombinant protein-producing GS-CHOK1SV cell lines are generated by transfection with an expression vector encoding both GS and the protein product genes followed by selection in MSX and glutamine-free medium. MSX is required to inhibit endogenous CHOK1SV GS, and in effect create a glutamine auxotrophy in the host that can be complemented by the expression vector encoded GS in selected cell lines. However, MSX is not a specific inhibitor of GS as it also inhibits the activity of GCL (a key enzyme in the glutathione biosynthesis pathway) to a similar extent. Glutathione species (GSH and GSSG) have been shown to provide both oxidizing and reducing equivalents to ER-resident oxidoreductases, raising the possibility that selection for transfectants with increased GCL expression could result in the isolation of GS-CHOKISV cell lines with improved capacity for recombinant protein production. In this study we have begun to address the relationship between MSX supplementation, the amount of intracellular GCL subunit and mAb production from a panel of GS-CHOK1SV cell lines. We then evaluated the influence of reduced GCL activity on batch culture of an industrially relevant mAb-producing GS-CHOK1SV cell line. To the best of our knowledge, this paper describes for the first time the change in expression of GCL subunits and recombinant mAb production in these cell lines with the degree of MSX supplementation in routine subculture. Our data also shows that partial inhibition of GCL activity in medium containing 75 µM MSX increases mAb productivity, and its more specific inhibitor BSO used at a concentration of 80 µM in medium increases the specific rate of mAb production eight-fold and the concentration in harvest medium by two-fold. These findings support a link between the inhibition of glutathione biosynthesis and recombinant protein production in industrially relevant systems and provide a process-driven method for

Road and Street Centerlines, Street-The data set is a line feature consisting of 13948 line segments representing streets. It was created to maintain the location of city and county based streets., Published in 1989, Davis County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Road and Street Centerlines dataset current as of 1989. Street-The data set is a line feature consisting of 13948 line segments representing streets. It was created...

Modified Starch of Sorghum Mutant Line Zh-30 for High Fiber Muffin Products

Directory of Open Access Journals (Sweden)

D.D.S. Santosa

2009-01-01

Full Text Available Sorghum mutant line Zh-30 is a breeding line developed at the Center for the Application of Isotope and Radiation Technology, BATAN by using mutation techniques. Gamma irradiation with the dose of 300 Gy was used to induce sorghum genetic variation. Through selection processes in several generations, the mutant line Zh-30 was identified to have better agronomic characteristics, better grain quality and higher grain yield than the original variety. Research on modified starch quality of this mutant line was done to identify its potential use in food industry. Functionality of pregelatinized, hydroxypropyl and crosslinked starch of this mutant line (Mutant TexInstant 30 has been studied for its use in high fiber muffin products. Characteristics of high fiber muffins containing 1.50; 3.50 and 5.50% of Mutant Tex-Instant 30 replacement levels to wheat flour were evaluated using both sensory panel and physical test methods. With regard to the sensory parameters, the high fiber muffins containing 1.50 - 5.50 % Mutant Tex-Instant 30 in general were not significantly different compared to the standard reference muffin. Results of physical evaluations showed that all Mutant Tex-Instant 30 containing products retained more moisture during baking than the standard reference. Tenderness of all products decreased at similar rate following 24 and 48 hr of room temperature storage and seven days at freezer temperature. These results suggested that sorghum mutant line Zh-30 starch could be modified and potentially used in food industry as a subtitute of wheat flour.

Modified Starch of Sorghum Mutant Line Zh-30 For High Fiber Muffin Products

International Nuclear Information System (INIS)

Santosa, D. D. S; Human, S

2009-01-01

Sorghum mutant line Zh-30 is a breeding line developed at the Center for the Application of Isotope and Radiation Technology, BATAN by using mutation techniques. Gamma irradiation with the dose of 300 Gy was used to induce sorghum genetic variation. Through selection processes in several generations, the mutant line Zh-30 was identified to have better agronomic characteristics, better grain quality and higher grain yield than the original variety. Research on modified starch quality of this mutant line was done to identify its potential use in food industry. Functionality of pregelatinized, hydroxypropyl and crosslinked starch of this mutant line (Mutant TexInstant 30) has been studied for its use in high fiber muffin products. Characteristics of high fiber muffins containing 1.50; 3.50 and 5.50% of Mutant Tex-Instant 30 replacement levels to wheat flour were evaluated using both sensory panel and physical test methods. With regard to the sensory parameters, the high fiber muffins containing 1.50 - 5.50 % Mutant Tex-Instant 30 in general were not significantly different compared to the standard reference muffin. Results of physical evaluations showed that all Mutant Tex-Instant 30 containing products retained more moisture during baking than the standard reference. Tenderness of all products decreased at similar rate following 24 and 48 hr of room temperature storage and seven days at freezer temperature. These results suggested that sorghum mutant line Zh-30 starch could be modified and potentially used in food industry as a subtitute of wheat flour (author)

Towards Product Lining Model-Driven Development Code Generators

OpenAIRE

Roth, Alexander; Rumpe, Bernhard

2015-01-01

A code generator systematically transforms compact models to detailed code. Today, code generation is regarded as an integral part of model-driven development (MDD). Despite its relevance, the development of code generators is an inherently complex task and common methodologies and architectures are lacking. Additionally, reuse and extension of existing code generators only exist on individual parts. A systematic development and reuse based on a code generator product line is still in its inf...

Product line based ontology reuse in context-aware e-business environment

DEFF Research Database (Denmark)

Zhang, Weishan; Kunz, Thomas

2006-01-01

Improving the reusability of ontology is recognized as increasingly important due to the prevalence of OWL research and applications. But there exists no convincing methodology and tool support in this direction yet. In this paper, we apply ideas from the research and practice with software product...... lines in order to explore this issue. The ontology is developed and managed according to the commonalities and variabilities underlying a specific problem domain. Meta-ontology is used in order to improve the reusability, evolve-ability and customizability of ontology. Another advantage is being able...... to generate needed ontology with the created meta-ontology implemented with XVCL (XML based Variant Configuration Language) technology. We demonstrate our product line based reuse approach with an example B2C application....

Exploring exploration orientation and its determinants : Some empirical evidence

NARCIS (Netherlands)

Commandeur, H.R.; Volberda, H.W.; Sidhu, J.S.

2004-01-01

Adopting an information-process perspective, this article conceptualizes exploration orientation in terms of scope of information acquisition. In line with this conceptualization, a multidimensional operational measure of exploration orientation is developed and its internal consistency established.

Object-oriented Programming Laws for Annotated Java Programs

Directory of Open Access Journals (Sweden)

Gabriel Falconieri Freitas

2010-03-01

Full Text Available Object-oriented programming laws have been proposed in the context of languages that are not combined with a behavioral interface specification language (BISL. The strong dependence between source-code and interface specifications may cause a number of difficulties when transforming programs. In this paper we introduce a set of programming laws for object-oriented languages like Java combined with the Java Modeling Language (JML. The set of laws deals with object-oriented features taking into account their specifications. Some laws deal only with features of the specification language. These laws constitute a set of small transformations for the development of more elaborate ones like refactorings.

A Landscape Analysis to Understand Orientation of Honey Bee (Hymenoptera: Apidae) Drones in Puerto Rico.

Science.gov (United States)

Galindo-Cardona, A; Monmany, A C; Diaz, G; Giray, T

2015-08-01

Honey bees [Apis mellifera L. (Apidae, Hymenoptera)] show spatial learning behavior or orientation, in which animals make use of structured home ranges for their daily activities. Worker (female) orientation has been studied more extensively than drone (male) orientation. Given the extensive and large flight range of drones as part of their reproductive biology, the study of drone orientation may provide new insight on landscape features important for orientation. We report the return rate and orientation of drones released at three distances (1, 2, and 4 km) and at the four cardinal points from an apiary located in Gurabo, Puerto Rico. We used high-resolution aerial photographs to describe landscape characteristics at the releasing sites and at the apiary. Analyses of variance were used to test significance among returning times from different distances and directions. A principal components analysis was used to describe the landscape at the releasing sites and generalized linear models were used to identify landscape characteristics that influenced the returning times of drones. Our results showed for the first time that drones are able to return from as far as 4 km from the colony. Distance to drone congregation area, orientation, and tree lines were the most important landscape characteristics influencing drone return rate. We discuss the role of landscape in drone orientation. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Students' Reaction to WebCT: Implications for Designing On-Line Learning Environments

Science.gov (United States)

Osman, Mohamed Eltahir

2005-01-01

There is a growing number of web-based and web-assisted course development tools and products that can be used to create on-line learning environment. The utility of these products, however, varies greatly depending on their feasibility, prerequisite infrastructure, technical features, interface, and course development and management tools. WebCT…

Cortical surface registration using spherical thin-plate spline with sulcal lines and mean curvature as features.

Science.gov (United States)

Park, Hyunjin; Park, Jun-Sung; Seong, Joon-Kyung; Na, Duk L; Lee, Jong-Min

2012-04-30

Analysis of cortical patterns requires accurate cortical surface registration. Many researchers map the cortical surface onto a unit sphere and perform registration of two images defined on the unit sphere. Here we have developed a novel registration framework for the cortical surface based on spherical thin-plate splines. Small-scale composition of spherical thin-plate splines was used as the geometric interpolant to avoid folding in the geometric transform. Using an automatic algorithm based on anisotropic skeletons, we extracted seven sulcal lines, which we then incorporated as landmark information. Mean curvature was chosen as an additional feature for matching between spherical maps. We employed a two-term cost function to encourage matching of both sulcal lines and the mean curvature between the spherical maps. Application of our registration framework to fifty pairwise registrations of T1-weighted MRI scans resulted in improved registration accuracy, which was computed from sulcal lines. Our registration approach was tested as an additional procedure to improve an existing surface registration algorithm. Our registration framework maintained an accurate registration over the sulcal lines while significantly increasing the cross-correlation of mean curvature between the spherical maps being registered. Copyright © 2012 Elsevier B.V. All rights reserved.

Bilateral symmetry detection on the basis of Scale Invariant Feature Transform.

Directory of Open Access Journals (Sweden)

Habib Akbar

Full Text Available The automatic detection of bilateral symmetry is a challenging task in computer vision and pattern recognition. This paper presents an approach for the detection of bilateral symmetry in digital single object images. Our method relies on the extraction of Scale Invariant Feature Transform (SIFT based feature points, which serves as the basis for the ascertainment of the centroid of the object; the latter being the origin under the Cartesian coordinate system to be converted to the polar coordinate system in order to facilitate the selection symmetric coordinate pairs. This is followed by comparing the gradient magnitude and orientation of the corresponding points to evaluate the amount of symmetry exhibited by each pair of points. The experimental results show that our approach draw the symmetry line accurately, provided that the observed centroid point is true.

Study of the on line radioactive multicharged ion production

International Nuclear Information System (INIS)

Lecesne, N.

1997-01-01

This work is directly related to the SPIRAL project (Systeme de Production d'Ions Radioactifs Acceleres en Ligne) which will start at GANIL at the end of 1998. The aim of the thesis was to study the on line radioactive multicharged ion beam production stages, i.e. the production and diffusion of the radioactive nuclei in a thick target, their possible transfer up to an ECR ion source and their ionisation. Production cross sections of radioactive neutron rich nuclei, formed by fragmentation of a heavy ion beam in a thick target, were measured. An external target-ECR source system, dedicated to the radioactive noble gases production, and two internal target-ECR source systems, dedicated to the radioactive condensable element production, were built and tested on the SIRa tests bench (Separateur d'Ions Radioactifs). Different detection configurations were elaborated in order to identify the radioactive nuclei and estimate their production yields. Finally, a new method for measuring the overall efficiency of the separator was developed and allowed to study the diffusion properties of radioactive noble gases in various targets. (author)

Postdictive modulation of visual orientation.

Science.gov (United States)

Kawabe, Takahiro

2012-01-01

The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1) or whether the target was vertical or not (Supplementary experiment). The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation). The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2). Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

A diversity oriented synthesis of natural product inspired molecular libraries.

Science.gov (United States)

Chauhan, Jyoti; Luthra, Tania; Gundla, Rambabu; Ferraro, Antonio; Holzgrabe, Ulrike; Sen, Subhabrata

2017-11-07

Natural products are the source of innumerable pharmaceutical drug candidates and also form an important aspect of herbal remedies. They are also a source of various bioactive compounds. Herein we have leveraged the structural attributes of several natural products in building a library of architecturally diverse chiral molecules by harnessing R-tryptophan as the chiral auxiliary. It is converted to its corresponding methyl ester 1 which in turn provided a bevy of 1-aryl-tetrahydro-β-carbolines 2a-d, which were then converted to chiral compounds via a diversity oriented synthetic strategy (DOS). In general, intermolecular and intramolecular ring rearrangements facilitated the formation of the final compounds. Four different classes of molecules with distinct architectures were generated, adding up to nearly twenty-two individual molecules. Phenotypic screening of a representative section of the library revealed two molecules that selectively inhibit MCF7 breast cancer cells with IC 50 of ∼5 μg mL -1 potency.

AN INVESTIGATION OF THE APPLICABILITY OF SOFTWARE PRODUCT LINE ENGINEERING FOR ENERGY AND COST-EFFICIENT GREENHOUSE PRODUCTION

DEFF Research Database (Denmark)

Mærsk-Møller, Hans Martin

product line architecture, and how the variability is managed and described using SPLE. It also describes how the DynaLight software product line and its products were developed. Doing so, it shows utilization of rich client platform technology in conjunction with SPLE, which has not been described....... Supplementary lighting is utilized to compensate for the light conditions in the darker months of the year in order to grow certain plants. This is both energy consuming and expensive, as the cost of electricity is high. New knowledge on the plasticity in plants to irregular light patterns is basis for a novel...... and cost, and two desktop tools, the first, DynaLight Desktop, a day-ahead-light-planning tool, and the second, DynaLight Desktop w/control, with the added capability to execute the plans by actuating the light inside the greenhouses. This work provides a SPLE methodology explicitly customized to our...

Marketing plan for Pharmacare product line in the Moscow region Case Oriola-KD

OpenAIRE

Mashkilleyson, Peter

2012-01-01

The thesis was commissioned by Oriola-KD. It deals with a marketing plan for a product line called Pharmacare. The product line will be launched in 2012 in the Moscow region in the Russian Federation. The purpose of this thesis was to acquire useful information about the Moscow market for the target company and produce a marketing plan that they can implement. The research question was how to create an effective marketing plan and what it entails. The literary review consisted of the theo...

Remodularizing Java Programs for Improved Locality of Feature Implementations in Source Code

DEFF Research Database (Denmark)

Olszak, Andrzej; Jørgensen, Bo Nørregaard

2011-01-01

Explicit traceability between features and source code is known to help programmers to understand and modify programs during maintenance tasks. However, the complex relations between features and their implementations are not evident from the source code of object-oriented Java programs....... Consequently, the implementations of individual features are difficult to locate, comprehend, and modify in isolation. In this paper, we present a novel remodularization approach that improves the representation of features in the source code of Java programs. Both forward- and reverse restructurings...... are supported through on-demand bidirectional restructuring between feature-oriented and object-oriented decompositions. The approach includes a feature location phase based of tracing program execution, a feature representation phase that reallocates classes into a new package structure based on single...

Recent progress concerning the production of controlled highly oriented electrospun nanofibrous arrays

Science.gov (United States)

Manea, L. R.; Hristian, L.; Leon, A. L.; Popa, A.

2016-08-01

Among the foreground domains of all the research-development programs at national and international level, a special place is occupied by that concerning the nanosciences, nanotechnologies, new materials and technologies. Electrospinning found a well-deserved place in this space, offering the preparation of nanomaterials with distinctive properties and applications in medicine, environment, photonic sensors, filters, etc. These multiple applications are generated by the fact that the electrospinning technology makes available the production of nanofibers with controllable characteristics (length, porosity, density, and mechanical characteristics), complexity and architecture. The apparition of 3D printing technology favors the production of complex nanofibrous structures, controlled assembly, self-assembly of electrospun nanofibers for the production of scaffolds used in various medical applications. The architecture of fibrous deposits has a special influence on the subsequent development of the cells of the reconstructed organism. The present work proposes to study of recent progress concerning the production of controlled highly oriented electrospun nanofibrous arrays and progress in research on the production of complex 2D and 3D structures.