WorldWideScience

Sample records for fast-stacking off-energy injection

  1. Fast stack activation procedure and effective long-term storage for high-performance polymer electrolyte membrane fuel cell

    Science.gov (United States)

    Yang, Seung Yong; Seo, Dong-Jun; Kim, Myeong-Ri; Seo, Min Ho; Hwang, Sun-Mi; Jung, Yong-Min; Kim, Beom-Jun; Yoon, Young-Gi; Han, Byungchan; Kim, Tae-Young

    2016-10-01

    Time-saving stack activation and effective long-term storage are one of most important issues that must be resolved for the commercialization of polymer electrolyte membrane fuel cell (PEMFC). Herein, we developed the cost-effective stack activation method to finish the whole activation within 30 min and the long-term storage method by using humidified N2 without any significant decrease in cell's performance for 30 days. Specifically, the pre-activation step with the direct injection of DI water into the stack and storage at 65 or 80 °C for 2 h increases the distinctive phase separation between the hydrophobic and hydrophilic regions in Nafion membrane, which significantly reduces the total activation time within 30 min. Additionally, the long-term storage with humidified N2 has no effect on the Pt oxidation and drying of Nafion membrane for 30 days due to its exergonic reaction in the cell. As a result, the high water content in Nafion membrane and the decrease of Pt oxidation are the critical factors that have a strong influence on the activation and long-term storage for high-performance PEMFC.

  2. Rise time of proton cut-off energy in 2D and 3D PIC simulations

    CERN Document Server

    Babaei, Javad; Londrillo, Pasquale; Mirzanejad, Saeed; Rovelli, Tiziano; Sinigardi, Stefano; Turchetti, Giorgio

    2016-01-01

    The Target Normal Sheath Acceleration (TNSA) regime for proton acceleration by laser pulses is experimentally consolidated and fairly well understood. However, uncertainties remain in the analysis of particle-in-cell (PIC) simulation results. The energy spectrum is exponential with a cut-off, but the maximum energy depends on the simulation time, following different laws in two and three dimensional (2D, 3D) PIC simulations, so that the determination of an asymptotic value has some arbitrariness. We propose two empirical laws for rise time of the cut-off energy in 2D and 3D PIC simulations, suggested by a model in which the proton acceleration is due to a surface charge distribution on the target rear side. The kinetic energy of the protons that we obtain follows two distinct laws, which appear to be nicely satisfied by PIC simulations. The laws depend on two parameters: the scaling time, at which the energy starts to rise, and the asymptotic cut-off energy. The values of the cut-off energy, obtained by fitti...

  3. Rise time of proton cut-off energy in 2D and 3D PIC simulations

    Science.gov (United States)

    Babaei, J.; Gizzi, L. A.; Londrillo, P.; Mirzanejad, S.; Rovelli, T.; Sinigardi, S.; Turchetti, G.

    2017-04-01

    The Target Normal Sheath Acceleration regime for proton acceleration by laser pulses is experimentally consolidated and fairly well understood. However, uncertainties remain in the analysis of particle-in-cell simulation results. The energy spectrum is exponential with a cut-off, but the maximum energy depends on the simulation time, following different laws in two and three dimensional (2D, 3D) PIC simulations so that the determination of an asymptotic value has some arbitrariness. We propose two empirical laws for the rise time of the cut-off energy in 2D and 3D PIC simulations, suggested by a model in which the proton acceleration is due to a surface charge distribution on the target rear side. The kinetic energy of the protons that we obtain follows two distinct laws, which appear to be nicely satisfied by PIC simulations, for a model target given by a uniform foil plus a contaminant layer that is hydrogen-rich. The laws depend on two parameters: the scaling time, at which the energy starts to rise, and the asymptotic cut-off energy. The values of the cut-off energy, obtained by fitting 2D and 3D simulations for the same target and laser pulse configuration, are comparable. This suggests that parametric scans can be performed with 2D simulations since 3D ones are computationally very expensive, delegating their role only to a correspondence check. In this paper, the simulations are carried out with the PIC code ALaDyn by changing the target thickness L and the incidence angle α, with a fixed a0 = 3. A monotonic dependence, on L for normal incidence and on α for fixed L, is found, as in the experimental results for high temporal contrast pulses.

  4. Off-energy-shell p-p scattering at sub-Coulomb energies via the Trojan horse method

    Science.gov (United States)

    Tumino, A.; Spitaleri, C.; Mukhamedzhanov, A.; Rapisarda, G. G.; Campajola, L.; Cherubini, S.; Crucillá, V.; Elekes, Z.; Fülöp, Z.; Gialanella, L.; Gulino, M.; Gyürky, G.; Kiss, G.; Cognata, M. La; Lamia, L.; Ordine, A.; Pizzone, R. G.; Romano, S.; Sergi, M. L.; Somorjai, E.

    2008-12-01

    Two-proton scattering at sub-Coulomb energies has been measured indirectly via the Trojan horse method applied to the p+d→p+p+n reaction to investigate off-energy shell effects for scattering processes. The three-body experiment was performed at 5 and 4.7 MeV corresponding to a p-p relative energy ranging from 80 to 670 keV. The free p-p cross section exhibits a deep minimum right within this relative energy region due to Coulomb plus nuclear destructive interference. No minimum occurs instead in the Trojan horse p-p cross section, which was extracted by employing a simple plane-wave impulse approximation. A detailed formalism was developed to build up the expression of the theoretical half-off-shell p-p cross section. Its behavior agrees with the Trojan horse data and in turn formally fits the n-n, n-p, and nuclear p-p cross sections given the fact that in its expression the Coulomb amplitude is negligible with respect to the nuclear one. These results confirm the Trojan horse suppression of the Coulomb amplitude for scattering due to the off-shell character of the process.

  5. Medroxyprogesterone Injection

    Science.gov (United States)

    Medroxyprogesterone intramuscular (into a muscle) injection and medroxyprogesterone subcutaneous (under the skin) injection are used to prevent pregnancy. Medroxyprogesterone subcutaneous injection is also used to treat endometriosis (a condition in which ...

  6. Pentamidine Injection

    Science.gov (United States)

    Pentamidine injection is used to treat pneumonia caused by a fungus called Pneumocystis carinii. It is in ... Pentamidine injection comes as powder to be mixed with liquid to be injected intramuscularly (into a muscle) ...

  7. Doripenem Injection

    Science.gov (United States)

    ... injection is in a class of medications called carbapenem antibiotics. It works by killing bacteria.Antibiotics such ... if you are allergic to doripenem injection; other carbapenem antibiotics such as imipenem/cilastatin (Primaxin) or meropenem ( ...

  8. Methotrexate Injection

    Science.gov (United States)

    Methotrexate injection is used alone or in combination with other medications to treat gestational trophoblastic tumors (a ... in bones) after surgery to remove the tumor. Methotrexate injection is also used to treat severe psoriasis ( ...

  9. Bendamustine Injection

    Science.gov (United States)

    Bendamustine injection is used to treat chronic lymphocytic leukemia (CLL; a type of cancer of the white ... injection. You should use birth control to prevent pregnancy in yourself or your partner during your treatment ...

  10. Caspofungin Injection

    Science.gov (United States)

    Caspofungin injection is used in adults and children 3 months of age and older to treat yeast ... people with a weakened ability to fight infection. Caspofungin injection is in a class of antifungal medications ...

  11. Temozolomide Injection

    Science.gov (United States)

    Temozolomide is used to treat certain types of brain tumors. Temozolomide is in a class of medications called alkylating ... Temozolomide injection comes as a powder to be added to fluid and injected over 90 minutes intravenously ( ...

  12. Pembrolizumab Injection

    Science.gov (United States)

    Pembrolizumab injection is used to treat melanoma (a type of skin cancer) that cannot be treated with ... who have a specific type of melanoma tumor. Pembrolizumab injection is also used to treat a certain ...

  13. Lacosamide Injection

    Science.gov (United States)

    ... injection is in a class of medications called anticonvulsants. It works by decreasing abnormal electrical activity in ... older (about 1 in 500 people) who took anticonvulsants like lacosamide injection to treat various conditions during ...

  14. Midazolam Injection

    Science.gov (United States)

    ... injection is in a class of medications called benzodiazepines. It works by slowing activity in the brain ... breast-feeding.talk to your doctor about the risks and benefits of receiving midazolam injection if you ...

  15. Doxycycline Injection

    Science.gov (United States)

    Doxycycline injection is used to treat or prevent bacterial infections, including pneumonia and other respiratory tract infections. ... certain skin, genital, intestine, and urinary system infections. Doxycycline injection may be used to treat or prevent ...

  16. Paclitaxel Injection

    Science.gov (United States)

    ... with other medications. Paclitaxel injection manufactured with polyoxyethylated castor oil is used to treat ovarian cancer (cancer that ... cancer, and lung cancer. Paclitaxel injection with polyoxyethylated castor oil is also used to treat Kaposi's sarcoma (a ...

  17. Etanercept Injection

    Science.gov (United States)

    ... will be using the prefilled syringe or automatic injection device, tell your doctor if you or the person who will be injecting the medication for you are allergic to rubber or latex.tell your doctor and pharmacist what ...

  18. Cyclosporine Injection

    Science.gov (United States)

    Cyclosporine injection is used with other medications to prevent transplant rejection (attack of the transplanted organ by ... who have received kidney, liver, and heart transplants. Cyclosporine injection should only be used to treat people ...

  19. Estrogen Injection

    Science.gov (United States)

    The estradiol cypionate and estradiol valerate forms of estrogen injection are used to treat hot flushes (hot ... should consider a different treatment. These forms of estrogen injection are also sometimes used to treat the ...

  20. Cefotaxime Injection

    Science.gov (United States)

    Cefotaxime injection is used to treat certain infections caused by bacteria including pneumonia and other lower respiratory ... skin, blood, bone, joint, and urinary tract infections. Cefotaxime injection may also be used before surgery, and ...

  1. Ustekinumab Injection

    Science.gov (United States)

    ... Do not inject into an area where the skin is tender, bruised, red, or hard or where you have scars or stretch marks.Your doctor or pharmacist will ... injection.you should know that ustekinumab injection may decrease your ability ... new or changing skin lesions, minor infections (such as open cuts or ...

  2. Ranitidine Injection

    Science.gov (United States)

    Ranitidine injection comes as a solution (liquid) to be mixed with another fluid and injected intravenously (into a vein) over 5 to 20 minutes. Ranitidine may also be injected into a muscle. It is usually given every 6 to 8 hours, but may also be given ...

  3. Subcutaneous Injections

    DEFF Research Database (Denmark)

    Thomsen, Maria

    This thesis is about visualization and characterization of the tissue-device interaction during subcutaneous injection. The tissue pressure build-up during subcutaneous injections was measured in humans. The insulin pen FlexTouchr (Novo Nordisk A/S) was used for the measurements and the pressure...... build-up was evaluated indirectly from the changes in the flow rate between subcutaneous injections and air injections. This method enabled the tissue counter pressure to be evaluated without a formal clinical study approval. The measurements were coupled to a model for the pressure evolution...

  4. Injection MD

    CERN Document Server

    Bartmann, W; Bracco, C; Drosdal, L; Gianfelice, E; Goddard, B; Kain, V; Papaphilippou, Y; Vanbavinckhove, G

    2012-01-01

    This note summarizes the results obtained at injection during the 2nd MD block and the floating MD block in July. Highlights are presented for injection in the LHC with the Q20 SPS optics, influence of the supercycle and injection with 25 ns bunch spacing. Beams were successfully injected into the LHC using the Q20 optics [1, 3]. Small corrections were needed to steer the beam in the transfer lines. Dispersion measurements were conducted for both beams. The horizontal normalized dispersion in TI2 was a factor 2 smaller for Q20 with respect to Q26, for TI8 on the other hand the opposite was observed. The results for injection loss dependency on super cycle composition show only a small increase in losses for beam 2. The losses observed must therefore mainly come from other sources such as shot-by-shot stability or quality of scraping. For the injection with 25 ns bunch spacing bunches were injected for both beams. For B1 up to the maximum of 288 bunches. For B2 on the other only up to 144 bunches were injected...

  5. Subcutaneous Injections

    DEFF Research Database (Denmark)

    Thomsen, Maria

    This thesis is about visualization and characterization of the tissue-device interaction during subcutaneous injection. The tissue pressure build-up during subcutaneous injections was measured in humans. The insulin pen FlexTouchr (Novo Nordisk A/S) was used for the measurements and the pressure...... build-up was evaluated indirectly from the changes in the flow rate between subcutaneous injections and air injections. This method enabled the tissue counter pressure to be evaluated without a formal clinical study approval. The measurements were coupled to a model for the pressure evolution...... in subcutaneous tissue, based on mass conservation and flow in a porous medium. From the measurements the flow permeability and bulk modulus of the tissue were determined. In the adipose tissue the drug forms a bolus from where it is absorbed by the blood capillaries. The spatial distribution of the injected...

  6. Mepolizumab Injection

    Science.gov (United States)

    ... or do not go away: pain, redness, swelling, warmth, burning, or itching in the place mepolizumab was injected headache dry and itchy skin with or without red, scaly rashes back pain muscle spasms Some side ...

  7. Metoclopramide Injection

    Science.gov (United States)

    ... and feeling of fullness that lasts long after meals. Metoclopramide injection is also used to prevent nausea ... tranylcypromine (Parnate); narcotic medications for pain; sedatives; sleeping pills; tetracycline (Bristacycline, Sumycin); tranquilizers. Your doctor may need ...

  8. Ramucirumab Injection

    Science.gov (United States)

    ... dose of ramucirumab injection. Tell your doctor or nurse if you experience any of the following while you receive ramucirumab: uncontrollable shaking of a part of the body; back pain or spasms; chest pain and tightness; chills; flushing; ...

  9. Alemtuzumab Injection

    Science.gov (United States)

    Alemtuzumab injection is used to treat B-cell chronic lymphocytic leukemia (a slowly developing cancer in which ... of white blood cell accumulate in the body). Alemtuzumab is in a class of medications called monoclonal ...

  10. Ferumoxytol Injection

    Science.gov (United States)

    Ferumoxytol injection is used to treat iron-deficiency anemia (a lower than normal number of red blood ... pharmacist what other prescription and nonprescription medications, vitamins, nutritional supplements, and herbal products you are taking or ...

  11. Fludarabine Injection

    Science.gov (United States)

    Fludarabine injection is used to treat chronic lymphocytic leukemia (CLL; a type of cancer of the white ... a reliable method of birth control to prevent pregnancy during this time. Talk to your doctor for ...

  12. Insulin Injection

    Science.gov (United States)

    ... or buttocks. Do not inject insulin into muscles, scars, or moles. Use a different site for each ... you are using insulin.Alcohol may cause a decrease in blood sugar. Ask your doctor about the ...

  13. Tigecycline Injection

    Science.gov (United States)

    ... in a person who was not in the hospital), skin infections, and infections of the abdomen (area between the ... that developed in people who were in a hospital or foot infections in people who have diabetes. Tigecycline injection is ...

  14. Golimumab Injection

    Science.gov (United States)

    Golimumab injection is used alone or with other medications to relieve the symptoms of certain autoimmune disorders ( ... did not help or could not be tolerated. Golimumab is in a class of medications called tumor ...

  15. Albiglutide Injection

    Science.gov (United States)

    ... will develop tumors of the thyroid gland, including medullary thyroid carcinoma (MTC; a type of thyroid cancer). ... symptoms or those listed in the IMPORTANT WARNING section, stop using albiglutide injection and call your doctor ...

  16. Dexamethasone Injection

    Science.gov (United States)

    ... body tissues,) gastrointestinal disease, and certain types of arthritis. Dexamethasone injection is also used for diagnostic testing. ... effects.tell your doctor if you have a fungal infection (other than on your skin or nails). ...

  17. Hydrocortisone Injection

    Science.gov (United States)

    ... own organs), gastrointestinal disease, and certain types of arthritis. Hydrocortisone injection is also used to treat certain ... effects.tell your doctor if you have a fungal infection (other than on your skin or nails). ...

  18. Methylprednisolone Injection

    Science.gov (United States)

    ... own organs), gastrointestinal disease, and certain types of arthritis. Methylprednisolone injection is also used to treat certain ... effects.tell your doctor if you have a fungal infection (other than on your skin or nails). ...

  19. Glatiramer Injection

    Science.gov (United States)

    ... To inject glatiramer, follow these steps: Remove one blister pack from the carton of glatiramer syringes and place ... paper label and remove the syringe from the blister pack. Check your prefilled syringe to be sure it ...

  20. Dexrazoxane Injection

    Science.gov (United States)

    ... that are used to treat or prevent certain side effects that may be caused by chemotherapy medications. Dexrazoxane injection (Zinecard) is used to prevent or decrease heart damage caused by doxorubicin in women who are ...

  1. Evolocumab Injection

    Science.gov (United States)

    ... autoinjector in hot water, microwave, or place in sunlight.Before you use evolocumab injection, look at the ... chills pain or burning during urination muscle or back pain dizziness stomach pain Some side effects can be ...

  2. Cidofovir Injection

    Science.gov (United States)

    Cidofovir injection is used along with another medication (probenecid) to treat cytomegaloviral retinitis (CMV retinitis) in people with acquired immunodeficiency syndrome (AIDS). Cidofovir is in a class of medications called antivirals. ...

  3. Brivaracetam Injection

    Science.gov (United States)

    ... older. Brivaracetam in a class of medications called anticonvulsants. It works by decreasing abnormal electrical activity in ... older (about 1 in 500 people) who took anticonvulsants like brivaracetam injection to treat various conditions during ...

  4. Diphenhydramine Injection

    Science.gov (United States)

    ... not to use diphenhydramine injection if you are breastfeeding because of the risk of harm to infants.tell your doctor if you have or have ever had asthma or other types of lung disease; glaucoma (a ...

  5. Cefazolin Injection

    Science.gov (United States)

    ... valve, respiratory tract (including pneumonia), biliary tract, and urinary tract infections. Cefazolin injection also may be used before, during, ... to learn about take-back programs in your community. See the FDA's Safe Disposal of Medicines website ( ...

  6. Ceftazidime Injection

    Science.gov (United States)

    ... skin, blood, bone, joint, female genital tract, and urinary tract infections. Ceftazidime injection is in a class of medications ... to learn about take-back programs in your community. See the FDA's Safe Disposal of Medicines website ( ...

  7. Fluconazole Injection

    Science.gov (United States)

    ... and fungal infections of the eye, prostate (a male reproductive organ), skin and nails. Fluconazole injection is ... Motrin, others) and naproxen (Aleve, Anaprox, Naprelan); oral contraceptives (birth control pills); oral medication for diabetes such ...

  8. Moxifloxacin Injection

    Science.gov (United States)

    ... available.Moxifloxacin injection is in a class of antibiotics called fluoroquinolones. It works by killing the bacteria that cause ... you are allergic to moxifloxacin, other quinolone or fluoroquinolone antibiotics such as ciprofloxacin (Cipro), gatifloxacin (Tequin) (not available ...

  9. Levofloxacin Injection

    Science.gov (United States)

    ... available. Levofloxacin injection is in a class of antibiotics called fluoroquinolones. It works by killing bacteria that cause infections. ... severe reaction to levofloxacin; any other quinolone or fluoroquinolone antibiotic such as ciprofloxacin (Cipro), gatifloxacin (Tequin) (not available ...

  10. Ciprofloxacin Injection

    Science.gov (United States)

    ... available. Ciprofloxacin injection is in a class of antibiotics called fluoroquinolones. It works by killing bacteria that cause infections. ... reaction to ciprofloxacin or any other quinolone or fluoroquinolone antibiotic such as gatifloxacin (Tequin) (not available in the ...

  11. Alirocumab Injection

    Science.gov (United States)

    ... further decrease the amount of low-density lipoprotein (LDL) cholesterol ('bad cholesterol') in the blood. Alirocumab injection is ... antibodies. It works by blocking the production of LDL cholesterol in the body to decrease the amount of ...

  12. Chloramphenicol Injection

    Science.gov (United States)

    ... an arm or leg sudden changes in vision pain with eye movement Chloramphenicol injection may cause a condition called gray syndrome in premature and newborn infants. There have also been reports of gray ...

  13. Sarilumab Injection

    Science.gov (United States)

    ... the needle. Do not try to warm the medication by heating it in a microwave, placing it in warm water or in direct sunlight, or through any other method.Before injecting, check the prefilled syringe to be sure that the expiration date printed on the package has not passed. Look ...

  14. Enfuvirtide Injection

    Science.gov (United States)

    ... inject enfuvirtide into any skin that has a tattoo, scar, bruise, mole, a burn site, or has ... Enfuvirtide may cause side effects. Tell your doctor if any of these symptoms are severe or do not go away: itching, swelling, pain, tingling, discomfort, ...

  15. Fluorouracil Injection

    Science.gov (United States)

    ... of a doctor who is experienced in giving chemotherapy medications for cancer. Treatment with fluorouracil injection may cause serious side effects. ... this medication.If you experience a serious side effect, you or your doctor ... (FDA) MedWatch Adverse Event Reporting program online (http://www.fda.gov/ ...

  16. Lanreotide Injection

    Science.gov (United States)

    Lanreotide injection is used to treat people with acromegaly (condition in which the body produces too much growth hormone, causing enlargement of the hands, feet, and facial features; joint pain; and other symptoms) who have not successfully, or cannot be treated ...

  17. Paliperidone Injection

    Science.gov (United States)

    ... the body slow movements or shuffling walk painful erection of the penis that lasts for hours cough, chills and/or other signs of infection Paliperidone injection may cause other side effects. Call your doctor if you have any unusual problems while taking this medication.If you experience a ...

  18. Ziprasidone Injection

    Science.gov (United States)

    ... stiffness falling confusion sweating loss of consciousness painful erection of the penis that lasts for hours Ziprasidone injection may cause other side effects. Call your doctor if you have any unusual problems while receiving this medication.If you experience a ...

  19. Risperidone Injection

    Science.gov (United States)

    ... control slow movements or shuffling walk falling painful erection of the penis that lasts for hours Risperidone extended-release injection may cause other side effects. Call your doctor if you have any unusual problems while receiving this medication.If you experience a ...

  20. Subcutaneous (SQ) injections

    Science.gov (United States)

    SQ injections; Sub-Q injections; Diabetes subcutaneous injection; Insulin subcutaneous injection ... NIH. Giving a subcutaneous injection . Rockville, MD. National ... of Health and Human Services NIH publications; 2015. Available ...

  1. Penicillin G Procaine Injection

    Science.gov (United States)

    Penicillin G procaine injection is used to treat certain infections caused by bacteria. Penicillin G procaine injection should not be used to treat ... in the treatment of certain serious infections. Penicillin G procaine injection is in a class of medications ...

  2. Iron Dextran Injection

    Science.gov (United States)

    ... allergic to iron dextran injection; any other iron injections such as ferric carboxymaltose (Injectafer), ferumoxytol (Feraheme), iron sucrose (Venofer), or sodium ferric gluconate (Ferrlecit);any other ...

  3. Sipuleucel-T Injection

    Science.gov (United States)

    Sipuleucel-T injection is used to treat certain types of advanced prostate cancer. Sipuleucel-T injection is in a class of medications called ... Sipuleucel-T injection comes as a suspension (liquid) to be injected over about 60 minutes into a vein ...

  4. On Maximal Injectivity

    Institute of Scientific and Technical Information of China (English)

    Ming Yi WANG; Guo ZHAO

    2005-01-01

    A right R-module E over a ring R is said to be maximally injective in case for any maximal right ideal m of R, every R-homomorphism f : m → E can be extended to an R-homomorphism f' : R → E. In this paper, we first construct an example to show that maximal injectivity is a proper generalization of injectivity. Then we prove that any right R-module over a left perfect ring R is maximally injective if and only if it is injective. We also give a partial affirmative answer to Faith's conjecture by further investigating the property of maximally injective rings. Finally, we get an approximation to Faith's conjecture, which asserts that every injective right R-module over any left perfect right self-injective ring R is the injective hull of a projective submodule.

  5. Epoetin Alfa Injection

    Science.gov (United States)

    ... Combivir), a medication used to treat human immunodeficiency virus (HIV). Epoetin alfa injection is also used before ... inject epoetin alfa, as directed by your doctor. Write down the date, time, dose of epoetin alfa ...

  6. Collagenase Clostridium Histolyticum Injection

    Science.gov (United States)

    Collagenase Clostridium histolyticum injection is used to treat Dupuytren's contracture (a painless thickening and tightening of tissue [cord] beneath ... of tissue can be felt upon examination. Collagenase Clostridium histolyticum injection is also used to treat Peyronie's ...

  7. Iron Sucrose Injection

    Science.gov (United States)

    Iron sucrose injection is used treat iron-deficiency anemia (a lower than normal number of red blood cells due ... and may cause the kidneys to stop working). Iron sucrose injection is in a class of medications called iron ...

  8. Intracytoplasmic sperm injection

    Science.gov (United States)

    Intracytoplasmic sperm injection, or ICSI, is a form of in vitro fertilization in which fertilization occurs outside of the ... laboratory dish. Within a few hours, a single sperm is injected through a fine needle into the ...

  9. Sodium Ferric Gluconate Injection

    Science.gov (United States)

    Sodium ferric gluconate injection is used to treat iron-deficiency anemia (a lower than normal number of ... are also receiving the medication epoetin (Epogen, Procrit). Sodium ferric gluconate injection is in a class of ...

  10. Calcitonin Salmon Injection

    Science.gov (United States)

    Calcitonin salmon injection is used to treat osteoporosis in postmenopausal women. Osteoporosis is a disease that causes bones to weaken and break more easily. Calcitonin salmon injection is also used to treat Paget's disease ...

  11. Other Injectable Medications

    Science.gov (United States)

    ... July 17, 2013 Last Edited: February 22, 2017 Articles from Diabetes Forecast® magazine: cg-infusion-sets,meds-bg-injectables,cg-injection-aids, In this section Treatment and Care Medication Insulin & ...

  12. Injection losses and protection

    CERN Document Server

    Bartmann, W; Baudrenghien, P; Bracco, C; Dehning, B; Di Mauro, A; Drosdal, L; Emery, J; Goddard, B; Holzer, E B; Höfle, W; Kain, V; Meddahi, M; Radaelli, S; Shaposhnilova, E; Uythoven, J; Valuch, D; Wenninger, J; Zamantzas, C; Gianfelice-Wendt, E

    2012-01-01

    Injection losses are compared for 2010 and 2011 operation. Mitigation techniques which were put in place in 2010 to reduce losses at injection are described. Issues in 2011 operation, their potential improvements and the performance reach for 2012 are shown.

  13. Beam injection into RHIC

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, W.; Hahn, H.; MacKay, W.W.; Satogata, T.; Tsoupas, N.; Zhang, W.

    1997-07-01

    During the RHIC sextant test in January 1997 beam was injected into a sixth of one of the rings for the first time. The authors describe the injection zone and its bottlenecks. They report on the commissioning of the injection system, on beam based measurements of the kickers and the application program to steer the beam.

  14. Injection moulding antireflective nanostructures

    DEFF Research Database (Denmark)

    Christiansen, Alexander Bruun; Clausen, Jeppe Sandvik; Mortensen, N. Asger

    2014-01-01

    in an injection moulding process, to fabricate the antireflective surfaces. The cycle-time was 35 s. The injection moulded structures had a height of 125 nm, and the visible spectrum reflectance of injection moulded black polypropylene surfaces was reduced from 4.5±0.5% to 2.5±0.5%. The gradient of the refractive...

  15. Injection moulding antireflective nanostructures

    DEFF Research Database (Denmark)

    Christiansen, Alexander Bruun; Clausen, Jeppe Sandvik; Mortensen, N. Asger

    in an injection moulding process, to fabricate the antireflective surfaces. The cycle-time was 35 s. The injection moulded structures had a height of 125 nm, and the visible spectrum reflectance of injection moulded black polypropylene surfaces was reduced from 4.5±0.5% to 2.5±0.5%. The gradient of the refractive...

  16. Epidural injections for back pain

    Science.gov (United States)

    ESI; Spinal injection for back pain; Back pain injection; Steroid injection - epidural; Steroid injection - back ... be pregnant What medicines you are taking, including herbs, supplements, and other drugs you bought without a ...

  17. Underground Injection Control (UIC)

    Science.gov (United States)

    Provide information on: individual injection well classes; regulations specific to each well class; technical guidance; compliance assistance; federal, state, and tribal/territory roles and responsibilities.

  18. Ferric Carboxymaltose Injection

    Science.gov (United States)

    ... pharmacist if you are allergic to ferric carboxymaltose injection, ferumoxytol (Feraheme), iron dextran (Dexferrum, Infed), iron sucrose (Venofer), or sodium ferric gluconate (Ferrlecit); any other ...

  19. Piezoelectric Injection Systems

    Science.gov (United States)

    Mock, R.; Lubitz, K.

    The origin of direct injection can be doubtlessly attributed to Rudolf Diesel who used air assisted injection for fuel atomisation in his first self-ignition engine. Although it became apparent already at that time that direct injection leads to reduced specific fuel consumption compared to other methods of fuel injection, it was not used in passenger cars for the moment because of its disadvantageous noise generation as the requirements with regard to comfort were seen as more important than a reduced specific consumption.

  20. [Intra-articular injections].

    Science.gov (United States)

    Chapelle, Ch

    2015-09-01

    It is not unusual for a specialist or general practitioner to be presented with a pathology which necessitates the use of an intra-articular injection of corticosteroids, hyaluronic acid or a local anaesthetic. It would seem to be interesting to update and to precise the techniques and methods of intraarticular injections which have appeared in recent international publications, when we know that 30 % of the injections given into the knee and so called "dry" are incorrect and, therefore, inefficient. The indication of an articular injection depends, firstly, on the diagnosis which should be done with great care; after which should be an objective analysis complete with secondary effects linked to both the injection and the product used. The conditions of asepsis, the choice of needles and quantities of the injection and even the ways of the injections should be reviewed in detail. The last studies clearly question the secondary effects of the cartilage degradations of the cortisone given as an intra-articular injection and shows its efficiency on the pain and inflammatory phenomonen in osteoarthritis. Studies on hyaluronic acid are often contradictory going from a modest result to an important pain relief but it is necessary to be aware that the objective criteria are difficult to interpret. The use of local anaesthetics in intra-articular is limited by the few indications in view of the major risk of aggravating the pre-existing lesions by the disappearing signs of pain.

  1. Injection of Deuterium Pellets

    DEFF Research Database (Denmark)

    Sørensen, H.; Andersen, P.; Andersen, S. A.

    1984-01-01

    A pellet injection system made for the TFR tokamak at Fontenay-aux-Roses, Paris is described. 0.12-mg pellets are injected with velocities of around 600-700 m/s through a 5-m long guide tube. Some details of a new light gas gun are given; with this gun, hydrogen pellets are accelerated...

  2. Corticotropin, Repository Injection

    Science.gov (United States)

    H.P. Acthar Gel® ... Corticotropin repository injection comes as a long acting gel to inject under the skin or into a ... prescription and nonprescription medications, vitamins, nutritional supplements, or herbal products you are taking or plan to take. ...

  3. Separably injective Banach spaces

    CERN Document Server

    Avilés, Antonio; Castillo, Jesús M F; González, Manuel; Moreno, Yolanda

    2016-01-01

    This monograph contains a detailed exposition of the up-to-date theory of separably injective spaces: new and old results are put into perspective with concrete examples (such as l∞/c0 and C(K) spaces, where K is a finite height compact space or an F-space, ultrapowers of L∞ spaces and spaces of universal disposition). It is no exaggeration to say that the theory of separably injective Banach spaces is strikingly different from that of injective spaces. For instance, separably injective Banach spaces are not necessarily isometric to, or complemented subspaces of, spaces of continuous functions on a compact space. Moreover, in contrast to the scarcity of examples and general results concerning injective spaces, we know of many different types of separably injective spaces and there is a rich theory around them. The monograph is completed with a preparatory chapter on injective spaces, a chapter on higher cardinal versions of separable injectivity and a lively discussion of open problems and further lines o...

  4. Dimethyl Ether Injection Studies

    DEFF Research Database (Denmark)

    Sorenson, Spencer C.; Glensvig, Michael; Abata, Duane L.

    1998-01-01

    effects of DME in high pressure injection have also been observed. DME has a higher compressibility than diesel fuel, resulting in larger pressure oscillations in the injection system during the injection process. The oscillations with DME also have a slower delay rate than those of diesel fuel......A series of preliminary investigations has been performed in order to investigate the behavior of DME in a diesel injection environment. These studies have in-cluded visual observations of the spray penetration and angles for high pressure injection into Nitrogen using conventional jerk pump...... in the same system. As a first attempt to simulate combustion of DME in Diesel engines, the results of the spray studies have been incorporated into a simplified spray combustion model. A turbulent jet structure was adjusted to fit the penetration rates of the observed sprays. The observed spray widths agreed...

  5. Injection moulding antireflective nanostructures

    DEFF Research Database (Denmark)

    Christiansen, Alexander Bruun; Clausen, Jeppe Sandvik; Mortensen, N. Asger

    in an injection moulding process, to fabricate the antireflective surfaces. The cycle-time was 35 s. The injection moulded structures had a height of 125 nm, and the visible spectrum reflectance of injection moulded black polypropylene surfaces was reduced from 4.5±0.5% to 2.5±0.5%. The gradient of the refractive...... index of the nanostructured surfaces was estimated from atomic force micrographs and the theoretical reflectance was calculated using the transfer matrix method and effective medium theory. The measured reflectance shows good agreement with the theory of graded index antireflective nanostructures...

  6. ALICE Injected Beam Accidents

    CERN Document Server

    Appleby, R B

    2009-01-01

    The ALICE (point 2) interaction region is sensitive to beam orbit errors arising from magnet setting errors on injection. In this report, beam accident scenarios under injection for ALICE are described, focusing on ultra- fast error injection scenarios for the interaction straight correctors and dipoles. Beam 1 and beam 2 accident scenarios are considered, where the errors can lead to beam orbits striking the ALICE vacuum chamber or elements of the machine. The required thresholds for magnet current interlocks are calculated to avoid machine and detector risk.

  7. LHCb Injected Beam Accidents

    CERN Document Server

    Appleby, R B

    2009-01-01

    The LHCb (point 8) interaction region is sensitive to beam orbit errors arising from magnet setting errors on injection. In this report, beam accident scenarios under injection for LHCb are described, focusing on ultra- fast error injection scenarios for the interaction straight correctors and dipoles. Beam 1 and beam 2 accident scenarios are considered, where the errors can lead to beam orbits striking the LHCb vacuum chamber or elements of the machine. The required thresholds for magnet current interlocks are calculated to avoid machine and detector risk.

  8. Common injections in musculoskeletal medicine.

    Science.gov (United States)

    Monseau, Aaron J; Nizran, Parminder Singh

    2013-12-01

    Musculoskeletal injections are a common procedure in primary care and sports medicine but can be intimidating for some clinicians. This article addresses current evidence for corticosteroid injections, and common injection indications and techniques, namely knee, subacromial bursa, glenohumeral joint, lateral epicondyle, de Quervain tenosynovitis, and greater trochanteric bursa injections. Preparation for injections and some evidence for ultrasound guidance are also reviewed.

  9. Mouse bladder wall injection.

    Science.gov (United States)

    Fu, Chi-Ling; Apelo, Charity A; Torres, Baldemar; Thai, Kim H; Hsieh, Michael H

    2011-07-12

    Mouse bladder wall injection is a useful technique to orthotopically study bladder phenomena, including stem cell, smooth muscle, and cancer biology. Before starting injections, the surgical area must be cleaned with soap and water and antiseptic solution. Surgical equipment must be sterilized before use and between each animal. Each mouse is placed under inhaled isoflurane anesthesia (2-5% for induction, 1-3% for maintenance) and its bladder exposed by making a midline abdominal incision with scissors. If the bladder is full, it is partially decompressed by gentle squeezing between two fingers. The cell suspension of interest is intramurally injected into the wall of the bladder dome using a 29 or 30 gauge needle and 1 cc or smaller syringe. The wound is then closed using wound clips and the mouse allowed to recover on a warming pad. Bladder wall injection is a delicate microsurgical technique that can be mastered with practice.

  10. IncobotulinumtoxinA Injection

    Science.gov (United States)

    ... injected into a muscle, it blocks the nerve signals that cause uncontrollable tightening and movements of the ... any of these symptoms, do not drive a car, operate machinery, or do other dangerous activities.if ...

  11. Amphotericin B Liposomal Injection

    Science.gov (United States)

    ... lining of the spinal cord and brain) and visceral leishmaniasis (a parasitic disease that usually affects spleen, ... complex injection: fever, chills, nausea, vomiting, flushing, back pain with or without chest tightness, chest pain, shortness ...

  12. PS injection area

    CERN Multimedia

    1974-01-01

    To the right is the PS ring viewed along the direction of the protons. At the left the injection line coming from the 50 MeV Linac 1 (bottom) and going towards the 800 MeV booster, or deflected to the right to be injected directly into straight section 16. The drumlike element behind the (blue) dipole magnet is a 'debuncher' (a 200 MHz cavity). See photos 7409014X and 7409009.

  13. Injection and Dump Systems

    CERN Document Server

    Bracco, C; Barnes, M J; Carlier, E; Drosdal, L N; Goddard, B; Kain, V; Meddahi, M; Mertens, V; Uythoven, J

    2012-01-01

    Performance and failures of the LHC injection and ex- traction systems are presented. In particular, a comparison with the 2010 run, lessons learnt during operation with high intensity beams and foreseen upgrades are described. UFOs, vacuum and impedance problems related to the injection and extraction equipment are analysed together with possible improvements and solutions. New implemented features, diagnostics, critical issues of XPOC and IQC applications are addressed.

  14. Syringe-injectable electronics.

    Science.gov (United States)

    Liu, Jia; Fu, Tian-Ming; Cheng, Zengguang; Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M

    2015-07-01

    Seamless and minimally invasive three-dimensional interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating the syringe injection (and subsequent unfolding) of sub-micrometre-thick, centimetre-scale macroporous mesh electronics through needles with a diameter as small as 100 μm. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with >90% device yield. We demonstrate several applications of syringe-injectable electronics as a general approach for interpenetrating flexible electronics with three-dimensional structures, including (1) monitoring internal mechanical strains in polymer cavities, (2) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (3) in vivo multiplexed neural recording. Moreover, syringe injection enables the delivery of flexible electronics through a rigid shell, the delivery of large-volume flexible electronics that can fill internal cavities, and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics.

  15. Syringe injectable electronics

    Science.gov (United States)

    Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M.

    2015-01-01

    Seamless and minimally-invasive three-dimensional (3D) interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating syringe injection and subsequent unfolding of submicrometer-thick, centimeter-scale macroporous mesh electronics through needles with a diameter as small as 100 micrometers. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with > 90% device yield. We demonstrate several applications of syringe injectable electronics as a general approach for interpenetrating flexible electronics with 3D structures, including (i) monitoring of internal mechanical strains in polymer cavities, (ii) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (iii) in vivo multiplexed neural recording. Moreover, syringe injection enables delivery of flexible electronics through a rigid shell, delivery of large volume flexible electronics that can fill internal cavities and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics. PMID:26053995

  16. Intracytoplasmic Sperm Injection (ICSI)

    Science.gov (United States)

    ... sperm must attach to the outside of the egg. Once attached, the sperm pushes through the outer layer to the inside ... in vitro fertilization (IVF) to help fertilize the egg. During ICSI, a single sperm is injected directly into the cytoplasm the egg. ...

  17. Water injection dredging

    NARCIS (Netherlands)

    Verhagen, H.J.

    2000-01-01

    Some twenty years ago WIS-dredging has been developed in the Netherlands. By injecting water into the mud layer, the water content of the mud becomes higher, it becomes fluid mud and will start to flow. The advantages of this system are that there is no need of transporting the mud in a hopper, and

  18. Giving an insulin injection

    Science.gov (United States)

    ... an alcohol wipe on your injection site. The insulin needs to go into the fat layer under the skin. Pinch the skin and put the needle in at a 45º angle. If your tissues are thick enough, you may be able to ...

  19. Injection-controlled laser resonator

    Science.gov (United States)

    Chang, J.J.

    1995-07-18

    A new injection-controlled laser resonator incorporates self-filtering and self-imaging characteristics with an efficient injection scheme. A low-divergence laser signal is injected into the resonator, which enables the injection signal to be converted to the desired resonator modes before the main laser pulse starts. This injection technique and resonator design enable the laser cavity to improve the quality of the injection signal through self-filtering before the main laser pulse starts. The self-imaging property of the present resonator reduces the cavity induced diffraction effects and, in turn, improves the laser beam quality. 5 figs.

  20. SPS injection kicker magnet

    CERN Multimedia

    1975-01-01

    One of the first-generation SPS injection kicker magnets, view of the complete tank. First proton beam from the PS was injected into the SPS in 1976, at a beam momentum of 10 GeV/c. These kickers served until the end of 1979 and were replaced at the beginning of 1980 by stronger ones, in preparation for the SPS as a proton-antiproton collider. For this, transfer momentum from the PS to the SPS was raised to 26 GeV/c, so as to avoid acceleration of the dense p and pbar bunches through SPS transition energy. Bearded Roland Tröhler is at the left, Giacomo Busetta smiles at the right. See also 7502073X, 7502074X and Annual Report 1975, 162.

  1. PS injection area

    CERN Multimedia

    1974-01-01

    Looking against the direction of protons in the main ring (left): the beam coming from the linac 1 either goes to the booster (on the right) or is deflected towards the PS to be directly injected into section 26 (facing the camera). Also shown the start of the TT2 line, ejected from straight section 16 to go towards the ISR passing over the beam line from the linac. (see Photo Archive 7409009)

  2. Injection-induced earthquakes.

    Science.gov (United States)

    Ellsworth, William L

    2013-07-12

    Earthquakes in unusual locations have become an important topic of discussion in both North America and Europe, owing to the concern that industrial activity could cause damaging earthquakes. It has long been understood that earthquakes can be induced by impoundment of reservoirs, surface and underground mining, withdrawal of fluids and gas from the subsurface, and injection of fluids into underground formations. Injection-induced earthquakes have, in particular, become a focus of discussion as the application of hydraulic fracturing to tight shale formations is enabling the production of oil and gas from previously unproductive formations. Earthquakes can be induced as part of the process to stimulate the production from tight shale formations, or by disposal of wastewater associated with stimulation and production. Here, I review recent seismic activity that may be associated with industrial activity, with a focus on the disposal of wastewater by injection in deep wells; assess the scientific understanding of induced earthquakes; and discuss the key scientific challenges to be met for assessing this hazard.

  3. Injection-induced earthquakes

    Science.gov (United States)

    Ellsworth, William L.

    2013-01-01

    Earthquakes in unusual locations have become an important topic of discussion in both North America and Europe, owing to the concern that industrial activity could cause damaging earthquakes. It has long been understood that earthquakes can be induced by impoundment of reservoirs, surface and underground mining, withdrawal of fluids and gas from the subsurface, and injection of fluids into underground formations. Injection-induced earthquakes have, in particular, become a focus of discussion as the application of hydraulic fracturing to tight shale formations is enabling the production of oil and gas from previously unproductive formations. Earthquakes can be induced as part of the process to stimulate the production from tight shale formations, or by disposal of wastewater associated with stimulation and production. Here, I review recent seismic activity that may be associated with industrial activity, with a focus on the disposal of wastewater by injection in deep wells; assess the scientific understanding of induced earthquakes; and discuss the key scientific challenges to be met for assessing this hazard.

  4. Steroid injections - tendon, bursa, joint

    Science.gov (United States)

    ... medlineplus.gov/ency/article/007678.htm Steroid injections - tendon, bursa, joint To use the sharing features on ... painful. It can be injected into a joint, tendon, or bursa. Description Your health care provider inserts ...

  5. Amphotericin B Lipid Complex Injection

    Science.gov (United States)

    Amphotericin B lipid complex injection is used to treat serious, possibly life-threatening fungal infections in people who did not respond ... to tolerate conventional amphotericin B therapy. Amphotericin B lipid complex injection is in a class of medications ...

  6. Injection treatments for patellar tendinopathy

    NARCIS (Netherlands)

    van Ark, Mathijs; Zwerver, Johannes; van den Akker-Scheek, Inge

    2011-01-01

    Objective Injection treatments are increasingly used as treatment for patellar tendinopathy. The aim of this systematic review is to describe the different injection treatments, their rationales and the effectiveness of treating patellar tendinopathy. Methods A computerised search of the Medline,

  7. Acupuncture Injection Combined with Electrokinetic Injection for Polydimethylsiloxane Microfluidic Devices

    Directory of Open Access Journals (Sweden)

    Ji Won Ha

    2017-01-01

    Full Text Available We recently reported acupuncture sample injection that leads to reproducible injection of nL-scale sample segments into a polydimethylsiloxane (PDMS microchannel for microchip capillary electrophoresis. The advantages of the acupuncture injection in microchip capillary electrophoresis include capability of minimizing sample loss and voltage control hardware and capability of introducing sample plugs into any desired position of a microchannel. However, the challenge in the previous study was to achieve reproducible, pL-scale sample injections into PDMS microchannels. In the present study, we introduce an acupuncture injection technique combined with electrokinetic injection (AICEI technique to inject pL-scale sample segments for microchip capillary electrophoresis. We carried out the capillary zone electrophoresis (CZE separation of FITC and fluorescein, and the mixture of 10 μM FITC and 10 μM fluorescein was separated completely by using the AICEI method.

  8. Acupuncture Injection Combined with Electrokinetic Injection for Polydimethylsiloxane Microfluidic Devices

    Science.gov (United States)

    2017-01-01

    We recently reported acupuncture sample injection that leads to reproducible injection of nL-scale sample segments into a polydimethylsiloxane (PDMS) microchannel for microchip capillary electrophoresis. The advantages of the acupuncture injection in microchip capillary electrophoresis include capability of minimizing sample loss and voltage control hardware and capability of introducing sample plugs into any desired position of a microchannel. However, the challenge in the previous study was to achieve reproducible, pL-scale sample injections into PDMS microchannels. In the present study, we introduce an acupuncture injection technique combined with electrokinetic injection (AICEI) technique to inject pL-scale sample segments for microchip capillary electrophoresis. We carried out the capillary zone electrophoresis (CZE) separation of FITC and fluorescein, and the mixture of 10 μM FITC and 10 μM fluorescein was separated completely by using the AICEI method. PMID:28326222

  9. SQL Injection Defenses

    CERN Document Server

    Nystrom, Martin

    2007-01-01

    This Short Cut introduces you to how SQL injection vulnerabilities work, what makes applications vulnerable, and how to protect them. It helps you find your vulnerabilities with analysis and testing tools and describes simple approaches for fixing them in the most popular web-programming languages. This Short Cut also helps you protect your live applications by describing how to monitor for and block attacks before your data is stolen. Hacking is an increasingly criminal enterprise, and web applications are an attractive path to identity theft. If the applications you build, manage, or guar

  10. MKI UFOs at Injection

    CERN Document Server

    Baer, T; Bartmann, W; Bracco, C; Carlier, E; Chanavat, C; Drosdal, L; Garrel, N; Goddard, B; Kain, V; Mertens, V; Uythoven, J; Wenninger, J; Zerlauth, M

    2011-01-01

    During the MD, the production mechanism of UFOs at the injection kicker magnets (MKIs) was studied. This was done by pulsing the MKIs on a gap in the circulating beam, which led to an increased number of UFOs. In total 43 UFO type beam loss patterns at the MKIs were observed during the MD. The MD showed that pulsing the MKIs directly induces UFO type beam loss patterns. From the temporal characteristics of the loss profile, estimations about the dynamics of the UFOs are made.

  11. Evaluation of the impact of viscosity, injection volume, and injection flow rate on subcutaneous injection tolerance

    Directory of Open Access Journals (Sweden)

    Berteau C

    2015-11-01

    Full Text Available Cecile Berteau,1 Orchidée Filipe-Santos,1 Tao Wang,2 Humberto E Rojas,2 Corinne Granger,1 Florence Schwarzenbach1 1Becton-Dickinson Medical Pharmaceutical Systems, Le Pont de Claix, France; 2Eli Lilly and Company, Indianapolis, IN, USA Aim: The primary objective of this study was to evaluate the impact of fluid injection viscosity in combination with different injection volumes and flow rates on subcutaneous (SC injection pain tolerance. Methods: The study was a single-center, comparative, randomized, crossover, Phase I study in 24 healthy adults. Each participant received six injections in the abdomen area of either a 2 or 3 mL placebo solution, with three different fluid viscosities (1, 8–10, and 15–20 cP combined with two different injection flow rates (0.02 and 0.3 mL/s. All injections were performed with 50 mL syringes and 27G, 6 mm needles. Perceived injection pain was assessed using a 100 mm visual analog scale (VAS (0 mm/no pain, 100 mm/extreme pain. The location and depth of the injected fluid was assessed through 2D ultrasound echography images. Results: Viscosity levels had significant impact on perceived injection pain (P=0.0003. Specifically, less pain was associated with high viscosity (VAS =12.6 mm than medium (VAS =16.6 mm or low (VAS =22.1 mm viscosities, with a significant difference between high and low viscosities (P=0.0002. Target injection volume of 2 or 3 mL was demonstrated to have no significant impact on perceived injection pain (P=0.89. Slow (0.02 mL/s or fast (0.30 mL/s injection rates also showed no significant impact on perceived pain during SC injection (P=0.79. In 92% of injections, the injected fluid was located exclusively in SC tissue whereas the remaining injected fluids were found located in SC and/or intradermal layers. Conclusion: The results of this study suggest that solutions of up to 3 mL and up to 15–20 cP injected into the abdomen within 10 seconds are well tolerated without pain. High

  12. On L-injective Covers

    Institute of Scientific and Technical Information of China (English)

    周德旭

    2004-01-01

    We use the class of L-injective modules to define L-injective covers, and provide the characterizations of L-injective covers by the properties of kernels of homomorphisms. We prove that the right L-noetherian right L-hereditary ring is just such that every right R-module has an L-injective cover which is monic. We also use kernels of homomorphisms to investigate L-simple L-injective covers and give some constructions ofL-simple L-iniective covers.

  13. Flow Injection Analysis

    DEFF Research Database (Denmark)

    Hansen, Elo Harald

    2004-01-01

    This chapter provides an introduction to automated chemical analysis, which essentially can be divided into two groups: batch assays, where the solution is stationary while the container is moved through a number of stations where various unit operations performed; and continuous-flow procedures,......, but it permits thr execution of novel and unique analytical procedures which are difficult or even impossible by conventional means. The performance and applicability of FIA, SI and LOV are illustrated by a series of practical examples.......This chapter provides an introduction to automated chemical analysis, which essentially can be divided into two groups: batch assays, where the solution is stationary while the container is moved through a number of stations where various unit operations performed; and continuous-flow procedures......, where the system is stationary while the solution moves through a set of conduits in which all required manipulations are performed. Emphasis is placed on flow injection analysis (FIA) and its further developments, that is, sequential injection analysis (SIA) and the Lab-on-Valve (LOV) approach. Since...

  14. Epidemiology of Injection Drug Use

    Science.gov (United States)

    Arruda, Nelson; Bruneau, Julie; Jutras-Aswad, Didier

    2016-01-01

    After more than 30 years of research, numerous studies have shown that injection drug use is associated with a wide range of adverse health outcomes such as drug overdoses, drug-related suicidal behaviours, comorbid psychiatric disorders, bloodborne pathogens and other infectious diseases, and traumas. This review explores new trends and prominent issues associated with injection drug use. The dynamic nature of injection drug use is underlined by examining its recent trends and changing patterns in Canada and other “high-income countries.” Three research topics that could further contribute to the development of comprehensive prevention and intervention strategies aimed at people who inject drugs are also discussed: risk behaviours associated with the injection of prescription opioids, binge injection drug use, and mental health problems as determinants of injection risk behaviours. PMID:27254088

  15. Evaluation of the impact of viscosity, injection volume, and injection flow rate on subcutaneous injection tolerance.

    Science.gov (United States)

    Berteau, Cecile; Filipe-Santos, Orchidée; Wang, Tao; Rojas, Humberto E; Granger, Corinne; Schwarzenbach, Florence

    2015-01-01

    The primary objective of this study was to evaluate the impact of fluid injection viscosity in combination with different injection volumes and flow rates on subcutaneous (SC) injection pain tolerance. The study was a single-center, comparative, randomized, crossover, Phase I study in 24 healthy adults. Each participant received six injections in the abdomen area of either a 2 or 3 mL placebo solution, with three different fluid viscosities (1, 8-10, and 15-20 cP) combined with two different injection flow rates (0.02 and 0.3 mL/s). All injections were performed with 50 mL syringes and 27G, 6 mm needles. Perceived injection pain was assessed using a 100 mm visual analog scale (VAS) (0 mm/no pain, 100 mm/extreme pain). The location and depth of the injected fluid was assessed through 2D ultrasound echography images. Viscosity levels had significant impact on perceived injection pain (P=0.0003). Specifically, less pain was associated with high viscosity (VAS =12.6 mm) than medium (VAS =16.6 mm) or low (VAS =22.1 mm) viscosities, with a significant difference between high and low viscosities (P=0.0002). Target injection volume of 2 or 3 mL was demonstrated to have no significant impact on perceived injection pain (P=0.89). Slow (0.02 mL/s) or fast (0.30 mL/s) injection rates also showed no significant impact on perceived pain during SC injection (P=0.79). In 92% of injections, the injected fluid was located exclusively in SC tissue whereas the remaining injected fluids were found located in SC and/or intradermal layers. The results of this study suggest that solutions of up to 3 mL and up to 15-20 cP injected into the abdomen within 10 seconds are well tolerated without pain. High viscosity injections were shown to be the most tolerated, whereas injection volume and flow rates did not impact perceived pain.

  16. SQL Injection Attacks and Defense

    CERN Document Server

    Clarke, Justin

    2012-01-01

    SQL Injection Attacks and Defense, First Edition: Winner of the Best Book Bejtlich Read Award "SQL injection is probably the number one problem for any server-side application, and this book unequaled in its coverage." -Richard Bejtlich, Tao Security blog SQL injection represents one of the most dangerous and well-known, yet misunderstood, security vulnerabilities on the Internet, largely because there is no central repository of information available for penetration testers, IT security consultants and practitioners, and web/software developers to turn to for help. SQL Injection Att

  17. Worldwide Injection Technique Questionnaire Study: Population Parameters and Injection Practices.

    Science.gov (United States)

    Frid, Anders H; Hirsch, Laurence J; Menchior, Astrid R; Morel, Didier R; Strauss, Kenneth W

    2016-09-01

    From February 1, 2014, through June 30, 2015, 13,289 insulin-injecting patients from 423 centers in 42 countries took part in one of the largest surveys ever performed in diabetes. The goal was to assess patient characteristics, as well as historical and practical aspects of their injection technique. Results show that 4- and 8-mm needle lengths are each used by nearly 30% of patients and 5- and 6-mm needles each by approximately 20%. Higher consumption of insulin (as measured by total daily dose) is associated with having lipohypertrophy (LH), injecting into LH, leakage from the injection site, and failing to reconstitute cloudy insulin. Glycated hemoglobin values are, on average, 0.5% higher in patients with LH and are significantly higher with incorrect rotation of sites and with needle reuse. Glycated hemoglobin values are lower in patients who distribute their injections over larger injection areas and whose sites are inspected routinely. The frequencies of unexpected hypoglycemia and glucose variability are significantly higher in those with LH, those injecting into LH, those who incorrectly rotate sites, and those who reuse needles. Needles associated with diabetes treatment are the most commonly used medical sharps in the world. However, correct disposal of sharps after use is critically suboptimal. Many used sharps end up in public trash and constitute a major accidental needlestick risk. Use of these data should stimulate renewed interest in and commitment to optimizing injection practices in patients with diabetes.

  18. Supersonic Jet Noise Reduction Using Flapping Injection and Pulsed Injection

    Science.gov (United States)

    Hafsteinsson, Haukur; Eriksson, Lars-Erik; Cuppoletti, Daniel; Gutmark, Ephraim; Department of Applied Mechanics, Chalmers University of Technology Team; Department of Aerospace Engineering, University of Cincinatti Team; Swedish Defence Material Administration, Sweden Team

    2013-11-01

    Aircraft are in general noisy and there is a high demand for reducing their noise levels. The jet exhaust is in most cases the main noise source of the aircraft, especially for low bypass ratio jet engines. Fluidic injection affecting the shear layer close to the nozzle exit is a promising noise reduction technique as it can be turned of while not needed and thus the negative effect on the engine performance will be minimized. In the presented work, LES is used to compare steady-state mass flow injection with steady-state mass flow flapping jet injection. The work is a direct continuation of a previous LES study on pulsed injection which showed that the pulsed injection induced pressure pulses in the jet which caused increased tonal noise in the downstream directions. The injection system considered in the presented work consists of eight evenly distributed injectors at the nozzle exit plane with a 90° injection angle relative to the flow direction. Flapping jet injection is believed to minimize the creation of these pressure pulses since it provides steady-state mass flow. This work is funded by Swedish Defense Material Administration (FMV).

  19. Rapid injection of rocuronium reduces withdrawal movement on injection.

    Science.gov (United States)

    Lee, Yong Cheol; Jang, Young Ho; Kim, Jin Mo; Lee, Sang Gyu

    2009-09-01

    To test whether rapid injection of rocuronium reduces withdrawal movement on injection. Randomized, prospective trial. Operating room in a university hospital. 150 ASA physical status I and II patients aged 18 to 60 years, undergoing general anesthesia. Patients were randomized to three groups. After undergoing anesthesia induction with thiopental sodium, then 5 seconds later receiving a rubber tourniquet applied to the mid-forearm to stop intravenous (IV) flow by gravity, the pretreatment drug was injected. The tourniquet was held for 15 seconds then released, and 1.0 mg/kg of 1% rocuronium was injected IV. Group C patients (n = 50) were pretreated with 0.1 mL/kg of 0.9% NaCl and then injected with rocuronium slowly within 10 seconds. Group L patients (n = 50) were pretreated with 0.1 mL/kg of preservative-free 1% lidocaine and then injected with rocuronium slowly within 10 seconds. Group R patients (n = 50) were pretreated with 0.1 mL/kg of 0.9% NaCl and then rapidly injected with rocuronium within approximately one second (as quickly as possible). After injection of the patient with the study drug, a single anesthesiologist with no knowledge of the study protocol graded each patient's response as follows: 0 = no response; 1 = mild movement limited to the wrist only; 2 = moderate movement involving the elbow and shoulder; and 3 = severe movement involving more than one extremity. Group C had the most intense and frequent withdrawal response. The frequency and intensity of withdrawal movement was significantly less in Groups L and R than Group C. No significant difference in withdrawal response between Groups L and R was noted. Withdrawal response can be significantly reduced for rocuronium injection without lidocaine pretreatment, simply through rapid injection.

  20. MR epidurography: distribution of injectate at caudal epidural injection

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, Darra T. [Cappagh National Orthopedic Hospital, Dublin 11 (Ireland); St Paul' s Hospital, Department of Radiology, Vancouver, BC (Canada); Kavanagh, Eoin C.; Moynagh, Michael R.; Eustace, Stephen [Cappagh National Orthopedic Hospital, Dublin 11 (Ireland); Mater Misericordiae University Hospital, Dublin 7 (Ireland); Poynton, Ashley; Chan, Vikki O. [Cappagh National Orthopedic Hospital, Dublin 11 (Ireland)

    2014-08-02

    To (a) evaluate the feasibility of MR epidurography (MRE) and (b) assess the distribution of injectate using two different volumes at caudal epidural steroid injection. Twenty patients who were referred with symptomatic low back pain for caudal epidural steroid injection were assigned to have either 10 ml (9/20) or 20 ml (11/20) of injectate administered. Gadolinium was included in the injection. The patients proceeded to MRI where sagittal and coronal T1-weighted fat-saturated sequences were acquired and reviewed in the mid-sagittal and right and left parasagittal views at the level of the exit foramina. Gadolinium was observed at or above the L3/4 disc level in all 11 patients who received 20 ml (100 %), compared with only five of nine patients who received 10 ml (56 %). Injectate was seen to the L4 nerve root level in all 11 patients who received 20 ml (100 %) but only four out of nine patients who received 10 ml (44 %), not even reaching the L5 nerve root level in four further of these nine patients (44 %). Overall, there was a trend to visualize gadolinium at higher levels of the epidural space with higher volumes injected. Firstly, MR epidurography is a safe technique that allows excellent visualization of the distribution of gadolinium in the epidural space following injection via the caudal hiatus. Secondly, a volume of 10 ml is unlikely to treat L5/S1 disease in almost half of patients at caudal epidural steroid injection and at least 20 ml of injectate is likely required for any medication to reach the desired level. (orig.)

  1. Prime injections and quasipolarities

    Directory of Open Access Journals (Sweden)

    Octavio Alberto Agustín-Aquino

    2014-05-01

    Full Text Available Let $p$ be a prime number. Consider the injection\\[ \\iota:\\mathbb{Z}/n\\mathbb{Z}\\to\\mathbb{Z}/pn\\mathbb{Z}:x\\mapsto px, \\]and the elements $e^{u}.v:=(u,v\\in \\mathbb{Z}/n\\mathbb{Z}\\rtimes \\mathbb{Z}/n\\mathbb{Z}^{\\times}$ and$e^{w}.r:=(w,r\\in \\mathbb{Z}/pn \\mathbb{Z}\\rtimes \\mathbb{Z}/pn\\mathbb{Z}^{\\times}$. Suppose that $e^{u}.v\\in\\mathbb{Z}/n\\mathbb{Z}\\rtimes \\mathbb{Z}/n\\mathbb{Z}^{\\times}$ is seen as an automorphism of $\\mathbb{Z}/n\\mathbb{Z}$defined by $e^{u}.v(x=vx+u$; then $e^{u}.v$ is a \\emph{quasipolarity} if it is an involution without fixed points.In this brief note we give an explicit formula for the number of quasipolarities of $\\mathbb{Z}/n\\mathbb{Z}$ interms of the prime decomposition of $n$, and we prove sufficient conditions such that $(e^{w}.r\\circ \\iota=\\iota\\circ (e^{u}.v$, where $e^{w}.r$ and $e^{u}.v$ are quasipolarities.

  2. Injection treatments for patellar tendinopathy

    NARCIS (Netherlands)

    van Ark, Mathijs; Zwerver, Johannes; van den Akker-Scheek, Inge

    2011-01-01

    Objective Injection treatments are increasingly used as treatment for patellar tendinopathy. The aim of this systematic review is to describe the different injection treatments, their rationales and the effectiveness of treating patellar tendinopathy. Methods A computerised search of the Medline, Em

  3. Interferon Alfa-2b Injection

    Science.gov (United States)

    Interferon alfa-2b injection is used to treat a number of conditions.Interferon alfa-2b injection is used alone or in ... Hodgkin's lymphoma (NHL; a slow-growing blood cancer). Interferon alfa-2b is in a class of medications ...

  4. Towards spin injection into silicon

    Energy Technology Data Exchange (ETDEWEB)

    Dash, S.P.

    2007-08-15

    Si has been studied for the purpose of spin injection extensively in this thesis. Three different concepts for spin injection into Si have been addressed: (1) spin injection through a ferromagnet-Si Schottky contact, (2) spin injection using MgO tunnel barriers in between the ferromagnet and Si, and (3) spin injection from Mn-doped Si (DMS) as spin aligner. (1) FM-Si Schottky contact for spin injection: To be able to improve the interface qualities one needs to understand the atomic processes involved in the formation of silicide phases. In order to obtain more detailed insight into the formation of such phases the initial stages of growth of Co and Fe were studied in situ by HRBS with monolayer depth resolution.(2) MgO tunnel barrier for spin injection into Si: The fabrication and characterization of ultra-thin crystalline MgO tunnel barriers on Si (100) was presented. (3) Mn doped Si for spin injection: Si-based diluted magnetic semiconductor samples were prepared by doping Si with Mn by two different methods i) by Mn ion implantation and ii) by in-diffusion of Mn atoms (solid state growth). (orig.)

  5. Injection treatments for patellar tendinopathy

    NARCIS (Netherlands)

    van Ark, Mathijs; Zwerver, Johannes; van den Akker-Scheek, Inge

    2011-01-01

    Objective Injection treatments are increasingly used as treatment for patellar tendinopathy. The aim of this systematic review is to describe the different injection treatments, their rationales and the effectiveness of treating patellar tendinopathy. Methods A computerised search of the Medline, Em

  6. Injection, injectivity and injectability in geothermal operations: problems and possible solutions. Phase I. Definition of the problems

    Energy Technology Data Exchange (ETDEWEB)

    Vetter, O.J.; Crichlow, H.B.

    1979-02-14

    The following topics are covered: thermodynamic instability of brine, injectivity loss during regular production and injection operations, injectivity loss caused by measures other than regular operations, heat mining and associated reservoir problems in reinjection, pressure maintenance through imported make-up water, suggested solutions to injection problems, and suggested solutions to injection problems: remedial and stimulation measures. (MHR)

  7. Sensor for Injection Rate Measurements

    Directory of Open Access Journals (Sweden)

    Milan Marcic

    2006-10-01

    Full Text Available A vast majority of the medium and high speed Diesel engines are equipped withmulti-hole injection nozzles nowadays. Inaccuracies in workmanship and changinghydraulic conditions in the nozzles result in differences in injection rates between individualinjection nozzle holes. The new deformational measuring method described in the paperallows injection rate measurement in each injection nozzle hole. The differences in injectionrates lead to uneven thermal loads of Diesel engine combustion chambers. All today knownmeasuring method, such as Bosch and Zeuch give accurate results of the injection rate indiesel single-hole nozzles. With multihole nozzles they tell us nothing about possibledifferences in injection rates between individual holes of the nozzle. At deformationalmeasuring method, the criterion of the injected fuel is expressed by the deformation ofmembrane occurring due to the collision of the pressure wave against the membrane. Thepressure wave is generated by the injection of the fuel into the measuring space. For eachhole of the nozzle the measuring device must have a measuring space of its own into whichfuel is injected as well as its measuring membrane and its own fuel outlet. Duringmeasurements procedure the measuring space must be filled with fuel to maintain anoverpressure of 5 kPa. Fuel escaping from the measuring device is conducted into thegraduated cylinders for measuring the volumetric flow through each hole of the nozzle.Themembrane deformation is assessed by strain gauges. They are glued to the membrane andforming the full Wheatstone’s bridge. We devoted special attention to the membrane shapeand temperature compensation of the strain gauges.

  8. LHC injection and dump protection

    CERN Document Server

    Bartmann, W; Bracco, C; Goddard, B; Kain, V; Rossi, A; Wollmann, D

    2010-01-01

    The machine protection against fast failures including injection or dump kickers relies on fixed and movable devices. Results will be shown from the low-intensity beam commissioning of the moveable injection protection devices in the SPS to LHC transfer lines and downstream of the LHC injection kickers, and of the LHC dump protection elements in IR6. This paper is almost exclusively focussing on the issues arising during the 2009 commissioning. The implications of these results and a commissioning status report with the planning for 2010 will be addressed.

  9. Financial methods for waterflooding injectate design

    Energy Technology Data Exchange (ETDEWEB)

    Heneman, Helmuth J.; Brady, Patrick V.

    2017-08-08

    A method of selecting an injectate for recovering liquid hydrocarbons from a reservoir includes designing a plurality of injectates, calculating a net present value of each injectate, and selecting a candidate injectate based on the net present value. For example, the candidate injectate may be selected to maximize the net present value of a waterflooding operation.

  10. Peginterferon Beta-1a Injection

    Science.gov (United States)

    ... lower legs hoarseness difficulty breathing or swallowing redness, warmth, swelling, pain, or infection in the place where you injected the medication that does not heal within a few days red or bloody stools or diarrhea stomach pain slow ...

  11. Beam Injection in Recirculator SALO

    CERN Document Server

    Guk, Ivan S; Dovbnya, Anatoly N; Kononenko, Stanislav; Peev, Fedor; Tarasenko, Alexander; Van der Wiel, Marnix

    2005-01-01

    Possible antetypes of injectors for electron recirculator SALO,* intended for nuclear-physical research, are analyzed. The plan injection of beams in recirculator is offered. Expected parameters of beams are designed.

  12. Infliximab, Infliximab-dyyb Injection

    Science.gov (United States)

    Infliximab and infliximab-dyyb injection are used to relieve the symptoms of certain autoimmune disorders (conditions in which the immune system ... has not improved when treated with other medications. Infliximab may also be used to relieve symptoms of ...

  13. Interferon Gamma-1b Injection

    Science.gov (United States)

    Interferon gamma-1b injection is used to reduce the frequency and severity of serious infections in people with ... with severe, malignant osteopetrosis (an inherited bone disease). Interferon gamma-1b is in a class of medications called ...

  14. Injectable Drug Eluting Elastomeric Polymer: A Novel Submucosal Injection Material

    Science.gov (United States)

    Tran, Richard T.; Palmer, Michael; Tang, Shou-Jiang; Abell, Thomas L.; Yang, Jian

    2011-01-01

    Background Biodegradable hydrogels can deliver therapeutic payloads with great potentials in endoscopic mucosal resection (EMR) and endoscopic submucosal dissection (ESD) to yield improvements in efficacy and foster mucosal regeneration. Objective To assess the efficacy of an injectable drug eluting elastomeric polymer (iDEEP) as a submucosal injection material. Design Comparative study among 3 different solutions using material characterization tests, ex vivo and in vivo porcine models. Setting Academic hospital. Interventions 30 gastric submucosal cushions were achieved with saline (0.9%), sodium hyaluronate (0.4%), and iDEEP (n = 10) in ex vivo porcine stomachs. Four porcine gastric submucosal cushions were then performed in vivo using iDEEP. Main outcome measurements Maximum injection pressure, Rebamipide release rate, submucosal elevation duration, and assessment of in vivo efficacy by en bloc resection. Results No significant difference in injection pressures between iDEEP (28.9 ± 0.3 PSI) and sodium hyaluronate (29.5 ± 0.4 PSI, P > .05) was observed. iDEEP gels displayed a controlled release of Rebamipide up to 2 weeks in vitro. The elevation height of iDEEP (5.7 ± 0.5 mm) was higher than saline (2.8 ± 0.2 mm, P < .01) and SH (4.2 ± 0.2 mm, P < .05). All EMR procedures were successfully performed after injection of iDEEP, and a large gel cushion was noted after the resection procedure. Limitations Benchtop, ex vivo, and non-survival pig study. Conclusions A novel injection solution was evaluated for endoscopic resection. These results suggest that iDEEP may provide a significant step towards the realization of an ideal EMR and ESD injection material. PMID:22301346

  15. Subcutaneous injection-induced cellulites.

    Science.gov (United States)

    Cheng, Kao-Chi; Huang, Po-Tsung; Liu, Chiu-Shong; Lin, Wen-Yuan

    2017-06-01

    In the hospice ward where patients are in the terminal stages of cancer, it is common practice to give them a subcutaneous injection of pain relievers to reduce their pain and make them more comfortable. Most of these patients are elderly and have low blood pressure or poor veins, which often makes it difficult to inject them because of the calcification at previous injection sites. Thus, subcutaneous injections are a convenient way to maintain analgesia and patient comfort. Our patient, a 73-year-old aboriginal woman, was diagnosed with gastric adenocarcinoma and peritoneal carcinomatosis in March, 2004. While she was in the inpatient hospice ward, a subcutaneous injection site became infected and localized cellulitis developed. The patient's quality of life began to decline and her hospice stay was lengthened due to these complications. This case is offered as a reference case of subcutaneous injection complications encountered by elderly patients in hospice care. © Author(s) 2017. This article is published with open access by China Medical University.

  16. Intravenous injections in neonatal mice.

    Science.gov (United States)

    Gombash Lampe, Sara E; Kaspar, Brian K; Foust, Kevin D

    2014-11-11

    Intravenous injection is a clinically applicable manner to deliver therapeutics. For adult rodents and larger animals, intravenous injections are technically feasible and routine. However, some mouse models can have early onset of disease with a rapid progression that makes administration of potential therapies difficult. The temporal (or facial) vein is just anterior to the ear bud in mice and is clearly visible for the first two days after birth on either side of the head using a dissecting microscope. During this window, the temporal vein can be injected with volumes up to 50 μl. The injection is safe and well tolerated by both the pups and the dams. A typical injection procedure is completed within 1-2 min, after which the pup is returned to the home cage. By the third postnatal day the vein is difficult to visualize and the injection procedure becomes technically unreliable. This technique has been used for delivery of adeno-associated virus (AAV) vectors, which in turn can provide almost body-wide, stable transgene expression for the life of the animal depending on the viral serotype chosen.

  17. New injection recommendations for patients with diabetes

    NARCIS (Netherlands)

    Frid, A.; Hirsch, L.; Gaspar, R.; Hicks, D.; Kreugel, G.; Liersch, J.; Letondeur, C.; Sauvanet, J. P.; Tubiana-Rufi, N.; Strauss, K.

    2010-01-01

    Aim: Injections administered by patients are one of the mainstays of diabetes management. Proper injection technique is vital to avoiding intramuscular injections, ensuring appropriate delivery to the subcutaneous tissues and avoiding common complications such as lipohypertrophy. Yet few formal guid

  18. New injection recommendations for patients with diabetes

    NARCIS (Netherlands)

    Frid, A.; Hirsch, L.; Gaspar, R.; Hicks, D.; Kreugel, G.; Liersch, J.; Letondeur, C.; Sauvanet, J. P.; Tubiana-Rufi, N.; Strauss, K.

    Aim: Injections administered by patients are one of the mainstays of diabetes management. Proper injection technique is vital to avoiding intramuscular injections, ensuring appropriate delivery to the subcutaneous tissues and avoiding common complications such as lipohypertrophy. Yet few formal

  19. Effect of injection timing and injection pressure on the performance ...

    African Journals Online (AJOL)

    DR OKE

    single cylinder diesel engine fitted with conventional mechanical fuel ... on Common Rail Direct Injection (CRDI) facilities where the biodiesel can be ... Keywords: Diesel engine, Ester of Honge Oil (EHO), Common Rail Direct ..... emission of EHO was higher than those of the diesel under the same operating conditions.

  20. On Simple-Injective Rings

    Institute of Scientific and Technical Information of China (English)

    W.K. Nicholson; Jae Keol Park; M.F. Yousif

    2002-01-01

    A ring R is called right simple-injective if every R-linear map from a right ideal of R to R with simple image can be extended to R. It is shown that a right simple-injective ring R is quasi-Frobenius if R is right Goldie with essential right socle, or R is left perfect and the right annihilator of k ∈ R is finitely generated whenever kR or Rk is simple. This extends a result of Bjork.

  1. Mastering Ninject for dependency injection

    CERN Document Server

    Baharestani, Daniel

    2013-01-01

    Mastering Ninject for Dependency Injection teaches you the most powerful concepts of Ninject in a simple and easy-to-understand format using lots of practical examples, diagrams, and illustrations.Mastering Ninject for Dependency Injection is aimed at software developers and architects who wish to create maintainable, extensible, testable, and loosely coupled applications. Since Ninject targets the .NET platform, this book is not suitable for software developers of other platforms. Being familiar with design patterns such as singleton or factory would be beneficial, but no knowledge of depende

  2. Therapeutic hip injections: Is the injection volume important?

    Energy Technology Data Exchange (ETDEWEB)

    Young, R., E-mail: russell.young@gwh.nhs.uk [Department of Radiology, Great Western Hospital, Swindon (United Kingdom); Harding, J. [Department of Radiology, University Hospital Coventry, Coventry (United Kingdom); Kingsly, A. [Department of Mathematics and Statistics, Bristol Institue of Technology, University of the West of England, Bristol (United Kingdom); Bradley, M. [Department of Radiology, Southmead Hospital, Bristol (United Kingdom)

    2012-01-15

    Aim: To assess whether an increased volume of local anaesthetic injection given with intra-articular steroids improves symptom relief in osteoarthritis of the hip. Materials and methods: One hundred and ten patients with hip osteoarthritis were randomized into two groups (A and B). All patients were given 40 mg triamcinolone and 2 ml bupivicaine, and patients from group B were also given 6 ml of sterile water for injection. Change in WOMAC (Western Ontario and McMaster University Osteoarthritis Index Version 3.1) scores from baseline to 3 months were calculated and assessed for clinical and statistical significance. The patients were assessed for pain at 2 weekly intervals using the Oxford pain chart. Results: Patients from group B showed some reduction in stiffness (7%) and improved function (3%) compared with group A, and there were more clinical responders in these two categories. However, there was no significant statistical or clinical difference in WOMAC scores between the two groups at 3 months. There was also no statistical difference in pain symptoms between the two groups during the study period, measured at 2 weekly intervals. One hundred and two patients reached the study endpoint; eight patients who had bilateral hip injections were subsequently included in the analysis, and these patients did not alter the findings significantly. Conclusions: Published total injection volumes used for treating osteoarthritis of the hip with intra-articular steroids vary from 3 to 12 ml. The present study has shown that there is no detriment to using a larger volume of injectate, and recommends that practitioners use total volumes between 3 and 9 ml.

  3. XQuery Injection Attack and Countermeasures

    Institute of Scientific and Technical Information of China (English)

    谭玉森

    2014-01-01

    As a database that allows data to be stored in XML format, XML database suffers from some similar attacks as traditional relational database does. These attacks include injection attack by XQuey function in application software. These include BaseX, eXist and MarkLogic. In order to defeat these attacks, countermeasures are proposed.

  4. Enhanced Injection Molding Simulation of Advanced Injection Molds

    Directory of Open Access Journals (Sweden)

    Béla Zink

    2017-02-01

    Full Text Available The most time-consuming phase of the injection molding cycle is cooling. Cooling efficiency can be enhanced with the application of conformal cooling systems or high thermal conductivity copper molds. The conformal cooling channels are placed along the geometry of the injection-molded product, and thus they can extract more heat and heat removal is more uniform than in the case of conventional cooling systems. In the case of copper mold inserts, cooling channels are made by drilling and heat removal is facilitated by the high thermal conductivity coefficient of copper, which is several times that of steel. Designing optimal cooling systems is a complex process; a proper design requires injection molding simulations, but the accuracy of calculations depends on how precise the input parameters and boundary conditions are. In this study, three cooling circuit designs and three mold materials (Ampcoloy 940, 1.2311 (P20 steel, and MS1 steel were used and compared using numerical methods. The effect of different mold designs and materials on cooling efficiency were examined using calculated and measured results. The simulation model was adjusted to the measurement results by considering the joint gap between the mold inserts.

  5. Sequential injection gas guns for accelerating projectiles

    Science.gov (United States)

    Lacy, Jeffrey M [Idaho Falls, ID; Chu, Henry S [Idaho Falls, ID; Novascone, Stephen R [Idaho Falls, ID

    2011-11-15

    Gas guns and methods for accelerating projectiles through such gas guns are described. More particularly, gas guns having a first injection port located proximate a breech end of a barrel and a second injection port located longitudinally between the first injection port and a muzzle end of the barrel are described. Additionally, modular gas guns that include a plurality of modules are described, wherein each module may include a barrel segment having one or more longitudinally spaced injection ports. Also, methods of accelerating a projectile through a gas gun, such as injecting a first pressurized gas into a barrel through a first injection port to accelerate the projectile and propel the projectile down the barrel past a second injection port and injecting a second pressurized gas into the barrel through the second injection port after passage of the projectile and to further accelerate the projectile are described.

  6. 77 FR 26755 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2012-05-07

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for... final decision allows the continued underground injection by Diamond Shamrock, of the specific...

  7. 78 FR 76294 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2013-12-17

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for... underground injection by Mosaic, of the specific restricted hazardous wastes identified in this exemption...

  8. Electrical injection schemes for nanolasers

    DEFF Research Database (Denmark)

    Lupi, Alexandra; Chung, Il-Sug; Yvind, Kresten

    2013-01-01

    The performance of injection schemes among recently demonstrated electrically pumped photonic crystal nanolasers has been investigated numerically. The computation has been carried out at room temperature using a commercial semiconductor simulation software. For the simulations two electrical...... of 3 InGaAsP QWs on an InP substrate has been chosen for the modeling. In the simulations the main focus is on the electrical and optical properties of the nanolasers i.e. electrical resistance, threshold voltage, threshold current and wallplug efficiency. In the current flow evaluation the lowest...... threshold current has been achieved with the lateral electrical injection through the BH; while the lowest resistance has been obtained from the current post structure even though this model shows a higher current threshold because of the lack of carrier confinement. Final scope of the simulations...

  9. Inadvertent intrathecal injection of atracurium

    Directory of Open Access Journals (Sweden)

    Nahid Zirak

    2011-01-01

    Full Text Available This report relates how tracurium was given by mistake, intrathecally, during spinal anesthesia, to a 38-year-old woman, who was a candidate for abdominal hysterectomy. When no analgesia was observed, the mistake in giving the injection was understood. She was evaluated postoperatively by train of four ratio, measuring her breathing rate, eye opening, and protruding of tongue at one, two, twenty-four, and forty-eight hours, and then at one and two weeks, with the final evaluation the following month. The patient had normal timings during the operation and postoperation periods, and no abnormal findings were observed through the first month. This finding was contrary to several studies, which described adverse reactions due to accidental intrathecal injection of neuromuscular blocking drugs.

  10. Injection and extraction for cyclotrons

    CERN Document Server

    Kleeven, W

    2006-01-01

    The main design goals for beam injection are explained and special problems related to a central region with internal ion source are considered. The principle of a PIG source is addressed. The issue of vertical focusing in the cyclotron centre is briefly discussed. Several examples of numerical simulations are given. Different ways of (axial) injection are briefly outlined. A proposal for a magnetostatic axial inflector is given. Different solutions for beam extraction are treated. These include the internal target, extraction by stripping, resonant extraction using a deflector and self-extraction. The different ways of creating a turn-separation are explained. The purpose of different types of extraction devices such as harmonic coils, deflectors and gradient corrector channels are outlined. Several illustrations are given in the form of photographs and drawings.

  11. INJECTION BOTULINUM IN PARALYTIC STRABISMUS

    Directory of Open Access Journals (Sweden)

    Krishna Kishore

    2015-09-01

    Full Text Available AIM: To assess the effectiveness of botulinum toxin injection to the antagonist muscle in paralytic strabismus. OBJECTIVE: To study the effect of botulinum toxin a injection into the antagonist muscle in cases of paralytic strabismus to alleviate diplopia. MATERIAL AND METHODS: This was a tertiary eye care hospital based prospective interventional study in the department of Orthoptics over a period from October 2011 to October 2013. 36 patients with paralytic strabismus of recent onset within 3 months, with chief complaint of double vision were included. RESULTS: The study data analysis of 36 patients of paralytic strabismus of recent onset (within 3 months with chief complaints of double vision showed a ge wise distribution as 3(8.33% in 0 - 20 years, 16(44.44% in 21 - 40 years, 16(44.44% in 41 - 60 years, 1(2.78% > 60 years. g ender wise 26(72.22% males, 10 (27.28% females, a etiology wise 15(41.67% were diabetic, 4(11.11% were traumatic, 11(30.56% were Id iopathic, 2(5.56% were due to CSOM and 4(11.11% due to Diabetes and Hypertension. All patients were treated with botulinum toxin injection to the antagonist nonoperatic muscle and were followed at an interval of 1 week, 1 month and 3 months. Thorough cli nical examination and Diplopia charting were done before and after treatment. CONCLUSION: Injection botulinum into the antagonist muscle during the first three months after the onset allows the patients to enjoy and appreciate fusion in primary gaze without necessity for head turn, Prevents contracture of antagonist muscle. Thus botulinum toxin is useful in the treatment of acute paretic loss of ocular muscle function when surgical treatment of the ocular muscles is not yet possible but the patient is obviously disturbed by diplopia or forced head posture. The procedure is simple, safe and effective method.

  12. Radial lean direct injection burner

    Science.gov (United States)

    Khan, Abdul Rafey; Kraemer, Gilbert Otto; Stevenson, Christian Xavier

    2012-09-04

    A burner for use in a gas turbine engine includes a burner tube having an inlet end and an outlet end; a plurality of air passages extending axially in the burner tube configured to convey air flows from the inlet end to the outlet end; a plurality of fuel passages extending axially along the burner tube and spaced around the plurality of air passage configured to convey fuel from the inlet end to the outlet end; and a radial air swirler provided at the outlet end configured to direct the air flows radially toward the outlet end and impart swirl to the air flows. The radial air swirler includes a plurality of vanes to direct and swirl the air flows and an end plate. The end plate includes a plurality of fuel injection holes to inject the fuel radially into the swirling air flows. A method of mixing air and fuel in a burner of a gas turbine is also provided. The burner includes a burner tube including an inlet end, an outlet end, a plurality of axial air passages, and a plurality of axial fuel passages. The method includes introducing an air flow into the air passages at the inlet end; introducing a fuel into fuel passages; swirling the air flow at the outlet end; and radially injecting the fuel into the swirling air flow.

  13. Spin Injection in Indium Arsenide

    Directory of Open Access Journals (Sweden)

    Mark eJohnson

    2015-08-01

    Full Text Available In a two dimensional electron system (2DES, coherent spin precession of a ballistic spin polarized current, controlled by the Rashba spin orbit interaction, is a remarkable phenomenon that’s been observed only recently. Datta and Das predicted this precession would manifest as an oscillation in the source-drain conductance of the channel in a spin-injected field effect transistor (Spin FET. The indium arsenide single quantum well materials system has proven to be ideal for experimental confirmation. The 2DES carriers have high mobility, low sheet resistance, and high spin orbit interaction. Techniques for electrical injection and detection of spin polarized carriers were developed over the last two decades. Adapting the proposed Spin FET to the Johnson-Silsbee nonlocal geometry was a key to the first experimental demonstration of gate voltage controlled coherent spin precession. More recently, a new technique measured the oscillation as a function of channel length. This article gives an overview of the experimental phenomenology of the spin injection technique. We then review details of the application of the technique to InAs single quantum well (SQW devices. The effective magnetic field associated with Rashba spin-orbit coupling is described, and a heuristic model of coherent spin precession is presented. The two successful empirical demonstrations of the Datta Das conductance oscillation are then described and discussed.

  14. Helpful tips for performing musculoskeletal injections.

    Science.gov (United States)

    Metz, John P

    2010-01-01

    Injections are valuable procedures for managing musculoskeletal conditions commonly encountered by family physicians. Corticosteroid injections into articular, periarticular, or soft tissue structures relieve pain, reduce inflammation, and improve mobility. Injections can provide diagnostic information and are commonly used for postoperative pain control. Local anesthetics may be injected with corticosteroids to provide additional, rapid pain relief. Steroid injection is the preferred and definitive treatment for de Quervain tenosynovitis and trochanteric bursitis. Steroid injections can also be helpful in controlling pain during physical rehabilitation from rotator cuff syndrome and lateral epicondylitis. Intra-articular steroid injection provides pain relief in rheumatoid arthritis and osteoarthritis. There is little systematic evidence to guide medication selection for therapeutic injections. The medication used and the frequency of injection should be guided by the goal of the injection (i.e., diagnostic or therapeutic), the underlying musculoskeletal diagnosis, and clinical experience. Complications from steroid injections are rare, but physicians should understand the potential risks and counsel patients appropriately. Patients with diabetes who receive periarticular or soft tissue steroid injections should closely monitor their blood glucose for two weeks following injection.

  15. Musculoskeletal injections: a review of the evidence.

    Science.gov (United States)

    Stephens, Mark B; Beutler, Anthony I; O'Connor, Francis G

    2008-10-15

    Injections are valuable procedures for managing musculoskeletal conditions commonly encountered by family physicians. Corticosteroid injections into articular, periarticular, or soft tissue structures relieve pain, reduce inflammation, and improve mobility. Injections can provide diagnostic information and are commonly used for postoperative pain control. Local anesthetics may be injected with corticosteroids to provide additional, rapid pain relief. Steroid injection is the preferred and definitive treatment for de Quervain tenosynovitis and trochanteric bursitis. Steroid injections can also be helpful in controlling pain during physical rehabilitation from rotator cuff syndrome and lateral epicondylitis. Intra-articular steroid injection provides pain relief in rheumatoid arthritis and osteoarthritis. There is little systematic evidence to guide medication selection for therapeutic injections. The medication used and the frequency of injection should be guided by the goal of the injection (i.e., diagnostic or therapeutic), the underlying musculoskeletal diagnosis, and clinical experience. Complications from steroid injections are rare, but physicians should understand the potential risks and counsel patients appropriately. Patients with diabetes who receive periarticular or soft tissue steroid injections should closely monitor their blood glucose for two weeks following injection.

  16. Corticosteroid Injections for Common Musculoskeletal Conditions.

    Science.gov (United States)

    Foster, Zoë J; Voss, Tyler T; Hatch, Jacquelynn; Frimodig, Adam

    2015-10-15

    Family physicians considering corticosteroid injections as part of a comprehensive treatment plan for musculoskeletal diagnoses will find few high-quality studies to assist with evidence-based decision making. Most studies of corticosteroid injections for the treatment of osteoarthritis, tendinopathy, bursitis, or neuropathy include only small numbers of patients and have inconsistent long-term follow-up. Corticosteroid injections for the treatment of adhesive capsulitis result in short-term improvements in pain and range of motion. For subacromial impingement syndrome, corticosteroid injections provide short-term pain relief and improvement in function. In medial and lateral epicondylitis, corticosteroid injections offer only short-term improvement of symptoms and have a high rate of symptom recurrence. Corticosteroid injections for carpal tunnel syndrome may help patients avoid or delay surgery. Trigger finger and de Quervain tenosynovitis may be treated effectively with corticosteroid injections. Patients with hip or knee osteoarthritis may have short-term symptom relief with corticosteroid injections.

  17. Challenges of titanium metal injection moulding

    CSIR Research Space (South Africa)

    Benson, JM

    2007-11-01

    Full Text Available . With the increased availability of higher quality titanium powder, metal injection moulding offers an attractive method for producing small, intricate components at a reasonable cost. This paper will present an overview of the metal injection moulding process...

  18. The effect of injection duration and injection site on pain and bruising of subcutaneous injection of heparin.

    Science.gov (United States)

    Pourghaznein, Tayebe; Azimi, Amir Vahedian; Jafarabadi, Mohammad Asghari

    2014-04-01

    To determine and compare the effects of four methods of subcutaneous heparin injection on pain and bruising in abdomen and thighs. Subcutaneous heparin injection is a common nursing clinical intervention. Nurses frequently inject heparin subcutaneously and this action often results in some complications such as bruising, haematoma, pain and induration in the injection site. There are also some other factors inducing complications associated with heparin injection, including the injection site and the injection duration. A quasi-experimental within-subject design. This study was conducted on 90 patients with COPD hospitalised in two ICU wards at two teaching hospitals in urban areas of Iran. They were administered heparin subcutaneously, 4000 units every 12 hours. Each patient received four injections in their abdomen and thighs, using four different methods. The number and size of bruising at the injection site were measured through a flexible millimetre ruler, 48 hours after each injection. The severity of pain was measured through pain visual analogue scale immediately after each injection. Collected data were analysed by descriptive and analytical statistics using spss 11.5 software. In the method 15 seconds injection duration and waiting for 5 seconds before withdrawing the needle, the number of bruising was significantly lower and size of bruising was significantly smaller, but no significant difference was found in the severity of pain. However, in other methods, the severity of pain in thighs was significantly higher than in abdomen, but no statistically significant difference was reported between the size and number of bruising in abdomen and thighs. The method 15 seconds injection duration and waiting for 5 seconds before withdrawing the needle is recommended to be used for subcutaneous heparin injection by clinical nurses. As to the results, the severity of pain in abdomen was lower than in thighs. This study proposed a suitable method for subcutaneous

  19. Injectivity Errors in Simulation of Foam EOR

    NARCIS (Netherlands)

    Leeftink, T.N.; Latooij, C.A.; Rossen, W.R.

    2013-01-01

    Injectivity is a key factor in the economics of foam EOR processes. Poor injectivity of lowmobility foam slows the production of oil and allows more time for gravity segregation of injected gas. The conventional Peaceman equation, when applied in a large grid block, makes two substantial errors in e

  20. Injectivity errors in simulation of foam EOR

    NARCIS (Netherlands)

    Leeftink, T.N.; Latooij, C.A.; Rossen, W.R.

    2014-01-01

    Injectivity is a key factor in the economics of foam enhanced oil recovery (EOR) processes. Poor injectivity of low-mobility foam slows the production of oil and allows more time for gravity segregation of injected gas. The conventional Peaceman equation (1978), when applied in a large grid block, m

  1. The Three Generations of Flow Injection Analysis

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Wang, Jianhua

    2004-01-01

    The characteristics of the three generations of flow injection analysis, that is, FIA, sequential injection analysis (SIA), and bead injection-lab-on-valve (BI-LOV), are briefly outlined, their individual advantages and shortcomings are discussed, and selected practical applications are presented....

  2. Electrical Injection Schemes for Nanolasers

    DEFF Research Database (Denmark)

    Lupi, Alexandra; Chung, Il-Sug; Yvind, Kresten

    2014-01-01

    Three electrical injection schemes based on recently demonstrated electrically pumped photonic crystal nanolasers have been numerically investigated: 1) a vertical p-i-n junction through a post structure; 2) a lateral p-i-n junction with a homostructure; and 3) a lateral p-i-n junction....... For this analysis, the properties of different schemes, i.e., electrical resistance, threshold voltage, threshold current, and internal efficiency as energy requirements for optical interconnects are compared and the physics behind the differences is discussed....

  3. Injected radiotracer techniques in hydrology

    Science.gov (United States)

    Rao, S. M.

    1984-08-01

    Radioactive tracers which have several advantages over conventional tracers made significant contributions to the development of the injected tracer method in hydrology. A review of the nuclear and the physico-chemical characteristics of the possible radiotracer compounds leads us to conclude that the most effective groundwater tracers are tritiated water (HTO),82Br- and58Co or60Co as a hexacyanocobaltate complex. A discussion of the various case studies in India and abroad covering the three groups of applications mentioned helps us to conclude that well established radiotracer methods with associated interpretational techniques are available for many short range studies in surface and subsurface hydrology.

  4. Porous media heat transfer for injection molding

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Neil Reginald

    2016-05-31

    The cooling of injection molded plastic is targeted. Coolant flows into a porous medium disposed within an injection molding component via a porous medium inlet. The porous medium is thermally coupled to a mold cavity configured to receive injected liquid plastic. The porous medium beneficially allows for an increased rate of heat transfer from the injected liquid plastic to the coolant and provides additional structural support over a hollow cooling well. When the temperature of the injected liquid plastic falls below a solidifying temperature threshold, the molded component is ejected and collected.

  5. Maximum magnitude earthquakes induced by fluid injection

    Science.gov (United States)

    McGarr, Arthur F.

    2014-01-01

    Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.

  6. Maximum magnitude earthquakes induced by fluid injection

    Science.gov (United States)

    McGarr, A.

    2014-02-01

    Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.

  7. The LHC injection kicker magnet

    CERN Document Server

    Ducimetière, Laurent; Barnes, M J; Wait, G D

    2003-01-01

    Proton beams will be injected into LHC at 450 GeV by two kicker magnet systems, producing magnetic field pulses of approximately 900 ns rise time and up to 7.86 s flat top duration. One of the stringent design requirements of these systems is a flat top ripple of less than ± 0.5%. Both injection systems are composed of 4 travelling wave kicker magnets of 2.7 m length each, powered by pulse forming networks (PFN's). To achieve the required kick strength of 1.2 Tm, a low characteristic impedance has been chosen and ceramic plate capacitors are used to obtain 5 Omega. Conductive stripes in the aperture of the magnets limit the beam impedance and screen the ferrite. The electrical circuit has been designed with the help of PSpice computer modelling. A full size magnet prototype has been built and tested up to 60 kV with the magnet under ultra high vacuum (UHV). The pulse shape has been precision measured at a voltage of 15 kV. After reviewing the performance requirements the paper presents the magnet...

  8. Groin injecting among a community-recruited sample of people who inject drugs in Thailand.

    Science.gov (United States)

    Ti, Lianping; Hayashi, Kanna; Kaplan, Karyn; Suwannawong, Paisan; Wood, Evan; Kerr, Thomas

    2014-01-16

    Use of the femoral vein for the injection of illicit drugs (i.e. groin injecting) has been linked to various health-related harms, including deep vein thrombosis. However, little is known about the prevalence of groin injecting and factors that predict this practice among people who inject drugs (PWID) in Thailand. We sought to investigate the prevalence and factors associated with groin injecting in Bangkok, Thailand. Data were derived from the Mitsampan Community Research Project in Bangkok between July and October 2011. Multivariate logistic regression was used to identify factors associated with groin injecting in the last six months. Among 437 participants, 34.3% reported groin injecting in the last six months. In multivariate analyses, factors positively associated with groin injecting included: having higher than secondary education (adjusted odds ratio [AOR] = 1.59; 95% confidence interval [CI]: 1.00 - 2.56), weekly midazolam injection (AOR = 8.26; 95% CI: 5.04 - 14.06), and reports of having had drugs planted on oneself by police (AOR = 2.14; 95% CI: 1.37 - 3.36). Over one-third of our sample of Thai PWID reported recent groin injecting. Frequent midazolam injection and higher education were found to be associated with groin injecting. That high intensity PWID were more likely to inject in the groin is concerning given the known negative consequences associated with the groin as a site of injection. Additionally, PWID who reported drug planting by police were more likely to inject in the groin, suggesting that reliance on law enforcement approaches may undermine safe injection practices in this setting. These findings highlight the need for evidence-based interventions to address the harms associated with groin injecting, including efforts to alert PWID to risks of groin injecting, the distribution of appropriate injecting equipment, and efforts to encourage use of other injecting sites.

  9. Fault Injection Techniques and Tools

    Science.gov (United States)

    Hsueh, Mei-Chen; Tsai, Timothy K.; Iyer, Ravishankar K.

    1997-01-01

    Dependability evaluation involves the study of failures and errors. The destructive nature of a crash and long error latency make it difficult to identify the causes of failures in the operational environment. It is particularly hard to recreate a failure scenario for a large, complex system. To identify and understand potential failures, we use an experiment-based approach for studying the dependability of a system. Such an approach is applied not only during the conception and design phases, but also during the prototype and operational phases. To take an experiment-based approach, we must first understand a system's architecture, structure, and behavior. Specifically, we need to know its tolerance for faults and failures, including its built-in detection and recovery mechanisms, and we need specific instruments and tools to inject faults, create failures or errors, and monitor their effects.

  10. Forum for injection techniques, India: The first Indian recommendations for best practice in insulin injection technique

    Directory of Open Access Journals (Sweden)

    Sanjay Kalra

    2012-01-01

    Full Text Available Advances in the treatment of diabetes have led to an increase in the number of injectable therapies, such as human insulin, insulin analogues, and glucagon-like peptide-1 analogues. The efficacy of injection therapy in diabetes depends on correct injection technique, among many other factors. Good injection technique is vital in achieving glycemic control and thus preventing complications of diabetes. From the patients′ and health-care providers′ perspective, it is essential to have guidelines to understand injections and injection techniques. The abridged version of the First Indian Insulin Injection technique guidelines developed by the Forum for Injection Technique (FIT India presented here acknowledge good insulin injection techniques and provide evidence-based recommendations to assist diabetes care providers in improving their clinical practice.

  11. Injectable biomaterials: a perspective on the next wave of injectable therapeutics.

    Science.gov (United States)

    Spector, Myron; Lim, Teck Chuan

    2016-02-02

    We are experiencing a new wave of injectable therapeutics (namely/injectable biomaterials) to complement injectable drugs and injectable biologics, and to serve as the basis for injectable combinatorial therapeutics. Injectable biomaterials contribute to the treatment of the fluid-filled defects which often result from disease and injury, by providing the missing physical framework (i.e. the stroma). However, while injectable matrices may be necessary for the successful treatment of certain lesions, they will not likely be sufficient. Chemoattractants for select endogenous cells, or cells themselves, may need to be incorporated into the matrix prior to its injection to ensure the necessary cellular repopulation of the cavitary defect. These agents and others (drugs and biologics) delivered by the matrix represent the new category of injectable combinatorial therapeutics.

  12. Examination of injection moulded thermoplastic maize starch

    Directory of Open Access Journals (Sweden)

    2007-12-01

    Full Text Available This paper focuses on the effect of the different injection moulding parameters and storing methods on injection moulded thermoplastic maize starch (TPS. The glycerol and water plasticized starch was processed in a twin screw extruder and then with an injection moulding machine to produce TPS dumbbell specimens. Different injection moulding set-ups and storing conditions were used to analyse the effects on the properties of thermoplastic starch. Investigated parameters were injection moulding pressure, holding pressure, and for the storage: storage at 50% relative humidity, and under ambient conditions. After processing the mechanical and shrinkage properties of the manufactured TPS were determined as a function of the ageing time. While conditioning, the characteristics of the TPS changed from a soft material to a rigid material. Although this main behaviour remained, the different injection moulding parameters changed the characteristics of TPS. Scanning electron microscope observations revealed the changes in the material on ageing.

  13. Resin injection in clays with high plasticity

    Science.gov (United States)

    Nowamooz, Hossein

    2016-11-01

    Regarding the injection process of polyurethane resins in clays with high plasticity, this paper presents the experimental results of the pressuremeter and cone penetration tests before and after injection. A very important increase in pressure limit or in soil resistance can be observed for all the studied depths close to the injection points. An analytical analysis for cylindrical pore cavity expansion in cohesive frictional soils obeying the Mohr-Coulomb criterion was then used to reproduce the pressuremeter tests before and after injection. The model parameters were calibrated by maintaining constant the elasticity parameters as well as the friction angel before and after injection. A significant increase in cohesion was observed because of soil densification after resin expansion. The estimated undrained cohesions, derived from the parameters of the Mohr-Coulomb criterion, were also compared with the cone penetration tests. Globally, the model predictions show the efficiency of resin injection in clay soils with high plasticity.

  14. Injectable Corticosteroids: Take Precautions and Use Caution.

    Science.gov (United States)

    Freire, Véronique; Bureau, Nathalie J

    2016-11-01

    Corticosteroids are routinely injected into soft tissues, tendon sheaths, bursae, and joints. These anti-inflammatory agents have different potency and solubility, and solubility is inversely correlated with the duration of action. Corticosteroids carry a low risk of complications but commonly cause systemic and local adverse effects. The use of intra-articular corticosteroid injections in the treatment of inflammatory arthritis and osteoarthritis is well established. Evidence also supports the use of injectable corticosteroids in the treatment of inflammatory tenosynovitis and bursitis associated with rheumatic diseases, trigger finger and de Quervain disease, and carpal tunnel syndrome. The role of corticosteroid injections in the management of rotator cuff disease remains unclear. Strong scientific evidence indicates that corticosteroid injections for lateral epicondylosis worsen the long-term outcomes of patients. This review article discusses the considerations related to the use of corticosteroid injections in the management of nonspinal musculoskeletal conditions.

  15. Deltoid injections of risperidone long-acting injectable in patients with schizophrenia.

    Science.gov (United States)

    Quiroz, Jorge A; Rusch, Sarah; Thyssen, An; Palumbo, Joseph M; Kushner, Stuart

    2011-06-01

    Risperidone long-acting injectable was previously approved for treatment of schizophrenia as biweekly injections in the gluteal muscle only. We present data on local injection-site tolerability and safety of risperidone long-acting injectable and comparability of systemic exposure of deltoid versus gluteal injections. Risperidone long-acting injectable was administered in an open-label, single-dose, two-way crossover study, with patients randomized to receive either 25mg gluteal/37.5mg deltoid crossover in two treatment periods or 50mg gluteal/50mg deltoid injections crossover; each treatment period was separated by an 85-day observation period (Study 1) and an open-label, multiple-dose study (4 sequential 37.5mg or 50mg deltoid injections every 2 weeks) (Study 2). The pharmacokinetic results from both the studies have already been published. In Study 1 (n=170), the majority of patients had no local injection-site findings, based on investigator and patient-rated evaluations. In Study 2 (n=53), seven of the 51 patients who received at least two deltoid injections discontinued (primary endpoint). However, none of the discontinuations were due to injection-site related reasons. The 90-percent upper confidence limit of the true proportion of injection-site issue withdrawals was 5.7 percent. No moderate or severe injection-site reactions were reported. Intramuscular injections via the deltoid and gluteal sites are equivalent routes of administration of risperidone long-acting injectable with respect to local injection-site tolerability. The overall safety and tolerability profile of risperidone long-acting injectable was comparable when administered as an intramuscular injection in the deltoid (37.5mg and 50mg) and gluteal (25mg and 50mg) sites.

  16. Optical injection in semiconductor ring lasers

    CERN Document Server

    Coomans, W; Van der Sande, G; Gelens, L; Danckaert, J; 10.1103/PhysRevA.81.033802

    2011-01-01

    We theoretically investigate optical injection in semiconductor ring lasers and disclose several dynamical regimes. Through numerical simulations and bifurcation continuation, two separate parameter regions in which two different injection-locked solutions coexist are revealed, in addition to a region in which a frequency-locked limit cycle coexists with an injection-locked solution. Finally, an antiphase chaotic regime without the involvement of any carrier dynamics is revealed. Parallels are drawn with the onset of chaos in the periodically forced Duffing oscillator.

  17. Waterflooding injectate design systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Brady, Patrick V.; Krumhansl, James L.

    2016-12-13

    A method of recovering a liquid hydrocarbon using an injectate includes recovering the liquid hydrocarbon through primary extraction. Physico-chemical data representative of electrostatic interactions between the liquid hydrocarbon and the reservoir rock are measured. At least one additive of the injectate is selected based on the physico-chemical data. The method includes recovering the liquid hydrocarbon from the reservoir rock through secondary extraction using the injectate.

  18. Autologous Fat Injection for Augmented Mammoplasty

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Eul Sik; Seo, Bo Kyoung; Yi, Ann; Cho, Kyu Ran [Korea University Ansan Hospital, Ansan (Korea, Republic of)

    2008-12-15

    Autologous fat injection is one of the methods utilized for augmented mammoplasty methods. In this surgical procedure, the fat for transfer is obtained from the donor site of the patient's own body by liposuction and the fat is then injected into the breast. We report here cases of three patients who underwent autologous fat injection. Two of the patients had palpable masses that were present after surgery. The serial imaging findings and surgical method of autologous fat transfer are demonstrated

  19. INJECTION CHOICE FOR SPALLATION NEUTRON SOURCE RING.

    Energy Technology Data Exchange (ETDEWEB)

    WEI,J.; BEEBE-WANG,J.; BLASKIEWICZ,M.; BRODOWSKI,J.; FEDOTOV,A.; GARDNER,C.; LEE,Y.Y.; RAPARIA,D.; DANILOV,V.; HOLMES,J.; PRIOR,C.; REES,G.; MACHIDA,S.

    2001-06-18

    Injection is key in the low-loss design of high-intensity proton facilities like the Spallation Neutron Source (SNS). During the design of both the accumulator and the rapid-cycling-synchrotron version of the SNS, extensive comparison has been made to select injection scenarios that satisfy SNS's low-loss design criteria. This paper presents issues and considerations pertaining to the final choice of the SNS injection systems.

  20. [Intra-articular injection of cortisone].

    Science.gov (United States)

    Hammer, M; Schwarz, T; Ganser, G

    2015-11-01

    Intra-articular injections with glucocorticoids are standard procedures according to therapy guidelines in many rheumatic conditions. There is increasing evidence from clinical trials on the treatment of rheumatoid arthritis that more patients will attain the target of remission using a combination of systemic medication and intra-articular injections with glucocorticoids compared to systemic medication alone. Intra-articular injections with glucocorticoids play an important role in the therapeutic management of pediatric rheumatic diseases. In many countries competency in performing intra-articular injections is among the important skills necessary for certification as a specialist in rheumatology.

  1. DC injection into low voltage AC networks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This report summarises the results of a study investigating the impact of levels of injected DC current injections on a low voltage AC distribution network systems in order to recommend acceptable limits of DC from microgeneration. Relevant literature is reviewed, and the impact of DC levels in distribution transformers, transformer modelling, and instrumental transformers are discussed. The impact of DC in residual current devices (RCD) and in domestic electricity watt hour meters is examined along with DC enhanced corrosion, corrosion failure, and the measurement of DC current injection. Sources of DC injection outlined include DC from computer power supplies, network faults, geomagnetic phenomena, lighting circuits/dimmers, and embedded generators.

  2. Pharmacokinetics of zinc tannate after intratesticular injection.

    Science.gov (United States)

    Migally, N B; Fahim, M S

    1984-01-01

    Forty-eight sexually mature male rats were injected intratesticularly with either 1, 3, or 6 mg zinc tannate (Kastrin) or with saline (as control). Zinc localized only in low concentration in primary spermatocytes and could not be detected in spermatogonia, Sertoli cells, spermatids, or spermatozoa. Forty-eight hours after injection of 1 mg Kastrin, zinc was accumulated in the spermatogonia and primary spermatocytes while, after injection of 3 mg, zinc was preferentially localized in Sertoli cells and spermatids; however, zinc was observed in the spermatids and spermatozoa 48 h after injection with 6 mg, and germ cells lost their identity and were fragmented after 1 week.

  3. Precision injection molding of freeform optics

    Science.gov (United States)

    Fang, Fengzhou; Zhang, Nan; Zhang, Xiaodong

    2016-08-01

    Precision injection molding is the most efficient mass production technology for manufacturing plastic optics. Applications of plastic optics in field of imaging, illumination, and concentration demonstrate a variety of complex surface forms, developing from conventional plano and spherical surfaces to aspheric and freeform surfaces. It requires high optical quality with high form accuracy and lower residual stresses, which challenges both optical tool inserts machining and precision injection molding process. The present paper reviews recent progress in mold tool machining and precision injection molding, with more emphasis on precision injection molding. The challenges and future development trend are also discussed.

  4. Nicolau Syndrome after Intramuscular Injection: 3 Cases

    Directory of Open Access Journals (Sweden)

    Seok-Kwun Kim

    2012-05-01

    Full Text Available Nicolau syndrome is a rare complication of intramuscular injection consisting of ischemic necrosis of skin, soft tissue, and muscular tissue that arises locoregionally. The characteristic pattern is pain around the injection site, developing into erythema, a livedoid dermatitis patch, and necrosis of the skin, subcutaneous fat, and muscle tissue. Three patients were injected with drugs (diclofenac sodium, ketoprofen, meperidine for pain relief. Three patients complained of pain, and a skin lesion was observed, after which necrosis developed on their buttocks. Each patient underwent debridement and coverage. The wound healed uneventfully. We report three cases of Nicolau syndrome in the buttocks following diclofenac intramuscular injection.

  5. Charge Injection and Transport in Organic Nanofibers

    DEFF Research Database (Denmark)

    Kjelstrup-Hansen, Jakob; Bøggild, Peter; Rubahn, H. G.

    2007-01-01

    We investigate the carrier injection and transport in individual para-hexaphenylene nanofibers by electrical transport measurements at different temperatures. The injected current shows much weaker temperature dependence than what would be anticipated from a simplistic model that considers...... the injection barrier height equal to the difference between the metal electrode work function and the HOMO energy level of the organic semiconductor. Semiquantitative modeling suggests that the weak temperature dependence is due to injection into a distribution of states rather than into a single energy level...

  6. Subdural injection: report of two cases

    Directory of Open Access Journals (Sweden)

    Cadavid-Puentes, Adriana

    2016-10-01

    Full Text Available Two cases are reported of accidental subdural injection during epidural procedures for pain control. The first one was a man with chronic lumbar pain who suffered such complication during an epidural injection of steroids using the interlaminar approach. The second one was a woman with intracranial hypotension syndrome who required the application of an epidural blood patch in order to control multiple CSF fistulae. The procedure had to be aborted twice due to the subdural pattern observed after injection of the contrast medium. Accidental subdural block is a rare complication of epidural injection for analgesic or anesthetic procedures.

  7. An Innovative Needle-free Injection System: Comparison to 1 ml Standard Subcutaneous Injection.

    Science.gov (United States)

    Kojic, Nikola; Goyal, Pragun; Lou, Cheryl Hamer; Corwin, Michael J

    2017-05-01

    A needle-free delivery system may lead to improved satisfaction and compliance, as well as reduced anxiety among patients requiring frequent or ongoing injections. This report describes a first-in-man assessment comparing Portal Instruments' innovative needle-free injection system with subcutaneous injections using a 27G needle. Forty healthy volunteer participants each received a total of four injections of 1.0 mL sterile saline solution, two with a standard subcutaneous injection using a 27G needle, and two using the Portal injection system. Perception of pain was measured using a 100-mm visual analog scale (VAS). Injection site reactions were assessed at 2 min and at 20-30 min after each injection. Follow-up contact was made 24-48 h after the injections. Subject preference regarding injection type was also assessed. VAS pain scores at Portal injection sites met the criteria to be considered non-inferior to the pain reported at 27G needle injection sites (i.e., upper 95% confidence bound less than +5 mm). Based on a mixed effects model, at time 0, accounting for potential confounding variables, the adjusted difference in VAS scores indicated that Portal injections were 6.5 mm lower than the 27G needle injections (95% CI -10.5, -2.5). No clinically important adverse events were noted. Portal injections were preferred by 24 (60%) of the subjects (P = 0.0015). As an early step in the development of this new needle-free delivery system, the current study has shown that a 1.0-mL saline injection can be given with less pain reported than a standard subcutaneous injection using a 27G needle.

  8. Injection Technique and Pen Needle Design Affect Leakage From Skin After Subcutaneous Injections.

    Science.gov (United States)

    Præstmark, Kezia Ann; Stallknecht, Bente; Jensen, Morten Lind; Sparre, Thomas; Madsen, Nils Berg; Kildegaard, Jonas

    2016-07-01

    After a subcutaneous injection fluid might leak out of the skin, commonly referred to as leakage or backflow. The objective was to examine the influence of needle design and injection technique on leakage after injections in the subcutaneous tissue of humans and pigs. Leakage data were obtained from a post hoc analysis of clinical trial data and from a pig study. Data from the clinical study were used to determine leakage as a function of injection volume, speed and region. Data from the pig study were used to determine leakage as a function of needle wall thickness, needle taper, injection angle, and wait time from end of injection to withdrawal of needle from skin. Leakage volume was positively related to injection volume. Injections in the abdomen caused less leakage than thigh injections. A 32G needle caused less leakage than a 31G and a 32G tip (tapered) needle, and a "straight in" 90° needle insertion angle caused less leakage than an angled (~45°) insertion. Wait times of minimum 3 seconds caused less leakage than immediate withdrawal of the needle after injection. Needle wall thickness and injection speed did not influence leakage. Leakage will be minimized using a thin needle, using 90° needle insertion in the abdomen, injecting maximum 800 µL at a time, and waiting at least 3 seconds after the injection until the needle is withdrawn from the skin. © 2016 Diabetes Technology Society.

  9. 21 CFR 522.2005 - Propofol injection.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Propofol injection. 522.2005 Section 522.2005 Food... Propofol injection. (a) Specifications. The drug is a sterile, nonpyrogenic, oil-in-water emulsion containing 10 milligrams of propofol per milliliter. (b) Sponsor. See No. 000061 in § 510.600(c) of this...

  10. APPLICATION OF INJECTION TECHNOLOGIES IN METALLURGICAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    S. V. Korneev

    2011-01-01

    Full Text Available Analysis of injection technologies shows that the largest prevalence they got d at application on powerful electric arc furnaces and at out-of-furnace processing of big volumes of metal. at the same time theoretical and experimental basis of using of injection technologies is constantly being replenished with new investigations.

  11. Homicide by intravenous injection of naphtha.

    Science.gov (United States)

    Case, M E; Poklis, A; Mackell, M A

    1985-01-01

    A case of homicide by the intravenous injection of Energine, a petroleum distillate spot remover, is presented. This case is the only known homicide committed with naphtha. This elderly man had severe natural disease in addition to chest trauma sustained in the assault leading to death; however, the rapid injection of approximately 25 mL of Energine was the overwhelming cause of death.

  12. The risk of intraarticular injections are overestimated

    DEFF Research Database (Denmark)

    Asmussen, Rikke; Just, Søren Andreas; Jensen Hansen, Inger Marie

    The risk of intraarticular injections are overestimated. Volume 73, Annals of the Rheumatic Diseases, the EULAR Journal,, June 2014 volume 73, supplement 2, p. 286-87......The risk of intraarticular injections are overestimated. Volume 73, Annals of the Rheumatic Diseases, the EULAR Journal,, June 2014 volume 73, supplement 2, p. 286-87...

  13. Lateral epicondylitis: review of injection therapies.

    Science.gov (United States)

    Judson, Christopher H; Wolf, Jennifer Moriatis

    2013-10-01

    Lateral epicondylitis has several different treatment methods, with no single agreed upon therapy. This article summarizes the current literature on injection therapies for lateral epicondylitis. Glucocorticoid, botulinum toxin, autologous blood, platelet-rich plasma, hyaluronic acid, polidocanol, glycosaminoglycan, and prolotherapy injections are discussed.

  14. Surface microstructure replication in injection molding

    DEFF Research Database (Denmark)

    Theilade, Uffe Arlø; Hansen, Hans Nørgaard

    2006-01-01

    In recent years, polymer components with surface microstructures have been in rising demand for applications such as lab-on-a-chip and optical components. Injection molding has proven to be a feasible and efficient way to manufacture such components. In injection molding, the mold surface topogra...

  15. 21 CFR 522.1086 - Guaifenesin injection.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Guaifenesin injection. 522.1086 Section 522.1086... Guaifenesin injection. (a) Specifications. Each milliliter of sterile aqueous solution contains 50 milligrams of guaifenesin and 50 milligrams of dextrose. (b) Sponsor. See Nos. 037990 and 059130 in § 510.600(c...

  16. Injection Molding of Plastics from Agricultural Materials

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, M.; Ruan, R.

    2001-02-22

    The objective of this research was to conduct a systematic study to relate injection molding parameters to properties of blends of starch and synthetic polymer. From this study, we wished to develop a thorough understanding of the injection molding process and gain significant insight into designing molds and aiding in developing products cheaply and efficiently.

  17. Children conceived after intracytoplasmic sperm injection (ICSI)

    DEFF Research Database (Denmark)

    Mau, C; Juul, A; Main, K M;

    2004-01-01

    The aim of the study was to evaluate current medical knowledge about children born after intracytoplasmic sperm injection (ICSI) with respect to congenital malformations, chromosome abnormalities and postnatal growth.......The aim of the study was to evaluate current medical knowledge about children born after intracytoplasmic sperm injection (ICSI) with respect to congenital malformations, chromosome abnormalities and postnatal growth....

  18. Rings with finite Gorenstein injective dimension

    DEFF Research Database (Denmark)

    Holm, Henrik Granau

    2004-01-01

    In this paper we prove that for any associative ring R, and for any left R-module M with nite projective dimension, the Gorenstein injective dimension GidRM equals the usual injective dimension idRM. In particular, if GidRR is nite, then also idRR is nite, and thus R is Gorenstein (provided that R...

  19. Anxiety and pain during dental injections

    NARCIS (Netherlands)

    van Wijk, A.J.; Hoogstraten, J.

    2009-01-01

    Objectives: The aim of this study was to study the relationship between anxiety and pain felt during a dental injection in a sample of ‘normal’ patients about to undergo ‘invasive’ dental treatment. Methods: Duration and intensity of pain during a dental injection were measured within a sample of

  20. Anxiety and pain during dental injections

    NARCIS (Netherlands)

    A.J. van Wijk; J. Hoogstraten

    2009-01-01

    Objectives: The aim of this study was to study the relationship between anxiety and pain felt during a dental injection in a sample of ‘normal’ patients about to undergo ‘invasive’ dental treatment. Methods: Duration and intensity of pain during a dental injection were measured within a sample of 24

  1. Injection Molding of High Aspect Ratio Nanostructures

    DEFF Research Database (Denmark)

    Matschuk, Maria; Larsen, Niels Bent

    We present a process for injection molding of 40 nm wide and >100 nm high pillars (pitch: 200 nm). We explored the effects of mold coatings and injection molding conditions on the replication quality of nanostructures in cyclic olefin copolymer. We found that optimization of molding parameters...

  2. Solid Organic Deposition During Gas Injection Studies

    DEFF Research Database (Denmark)

    Dandekar, Abhijit Y.; Andersen, Simon Ivar; Stenby, Erling Halfdan

    2000-01-01

    Recently a series of first contact miscibility (swelling) experiments have been performed on undersaturated light and heavy oils using LPG rich and methane rich injection gases, in which solid organic deposition was observed. A compositional gradient in the oils during the gas injection process w...

  3. Injection Technique and Pen Needle Design Affect Leakage From Skin After Subcutaneous Injections

    DEFF Research Database (Denmark)

    Præstmark, Kezia Ann; Stallknecht, Bente; Jensen, Morten Lind;

    2016-01-01

    BACKGROUND: After a subcutaneous injection fluid might leak out of the skin, commonly referred to as leakage or backflow. The objective was to examine the influence of needle design and injection technique on leakage after injections in the subcutaneous tissue of humans and pigs. METHOD: Leakage...

  4. Two Cases of Accidental Injection of Epinephrine into a Digit Treated with Subcutaneous Phentolamine Injections

    Directory of Open Access Journals (Sweden)

    Ryan P. Bodkin

    2013-01-01

    Full Text Available Accidental injection into the digit from an epinephrine autoinjection device can cause discoloration, pain, and paresthesias. Although loss of digit is rare, treatment in the emergency department is commonly aimed at vasodilation of the affected tissue. We report two cases of accidental injection of epinephrine into the digits that were successfully treated with subcutaneous phentolamine injection with no adverse events.

  5. Two cases of accidental injection of epinephrine into a digit treated with subcutaneous phentolamine injections.

    Science.gov (United States)

    Bodkin, Ryan P; Acquisto, Nicole M; Gunyan, Holly; Wiegand, Timothy J

    2013-01-01

    Accidental injection into the digit from an epinephrine autoinjection device can cause discoloration, pain, and paresthesias. Although loss of digit is rare, treatment in the emergency department is commonly aimed at vasodilation of the affected tissue. We report two cases of accidental injection of epinephrine into the digits that were successfully treated with subcutaneous phentolamine injection with no adverse events.

  6. Surface micro topography replication in injection moulding

    DEFF Research Database (Denmark)

    Arlø, Uffe Rolf

    , the topography itself, and other factors were also investigated. The experimental work is based on a multi-purpose experimental injection mould with a collection of test surface inserts manufactured by EDM (electrical discharge machining). Experimental production took place with an injection moulding machine......Thermoplastic injection moulding is a widely used industrial process that involves surface generation by replication. The surface topography of injection moulded plastic parts can be important for aesthetical or technical reasons. With the emergence of microengineering and nanotechnology additional...... in a clean room environment. The mould and the injection moulding machine were fitted with transducers for subsequent process analysis. A total of 13 different plastic material grades were applied. Topographical characterisation was performed with an optical laser focus detection instrument. Replication...

  7. Injection moulding for macro and micro products

    DEFF Research Database (Denmark)

    Islam, Mohammad Aminul

    The purpose of the literature survey is to investigate the injection moulding technology in the macro and micro areas from the basic to the state-of-the-art recent technology. Injection moulding is a versatile production process for the manufacturing of plastic parts and the process is extensively...... used for macro products but with the ages it is going deep into the micro areas having machine and process improvements. Extensive research work on injection moulding is going on all over the world. New ideas are flowing into the machines, materials and processes. The technology has made significant...... advancement in the area of micro injection moulding, multi-component and two component injection mounding. In near future it is likely to be the way of manufacturing moulded interconnects devices (MID) for a low cost integration of electrical and mechanical functionalities on a single device. This paper...

  8. Hot carrier injection degradation under dynamic stress

    Institute of Scientific and Technical Information of China (English)

    Ma Xiao-Hua; Cao Yan-Rong; Hao Yue; Zhang Yue

    2011-01-01

    In this paper, we have studied hot carrier injection (HCI) under alternant stress. Under different stress modes, different degradations are obtained from the experiment results. The different alternate stresses can reduce or enhance the HC effect, which mainly depends on the latter condition of the stress cycle. In the stress mode A (DC stress with electron injection), the degradation keeps increasing. In the stress modes B (DC stress and then stress with the smallest gate injection) and C (DC stress and then stress with hole injection under Vg=0V and Vd = 1.8 V), recovery appears in the second stress period. And in the stress mode D (DC stress and then stress with hole injection under Vg = -1.8 V and Vd = 1.8 V), as the traps filled in by holes can be smaller or greater than the generated interface states, the continued degradation or recovery in different stress periods can be obtained.

  9. CMOS Direct-Injection Divide-by-3 Injection-Locked Frequency Dividers

    Institute of Scientific and Technical Information of China (English)

    Chia-Wei; Chang; Jhin-Fang; Huang; Sheng-Lyang; Jang; Ying-Hsiang; Liao; Miin-Horng; Juang

    2010-01-01

    <正>This paper proposes CMOS LC-tank divide-by-3 injection locked frequency dividers(ILFDs)fabricated in 0.18μn and 90nm CMOS process and describes the circuit design,operation principle and measurement results of the ILFDs.The ILFDs use two injection series-MOSFETs across the LC resonator and a differential injection signal is applied to the gates of injection MOSFETs.The direct-injection divide-by-3 ILFDs are potential for radio-frequency application and can have wide locking range.

  10. In-situ combustion with solvent injection

    Energy Technology Data Exchange (ETDEWEB)

    D' Silva, J.; Kakade, G. [Society of Petroleum Engineers, Kuala Lumpur (Malaysia)]|[Maharashtra Inst. of Technology, Pune (India)

    2008-10-15

    The effects of combining in situ combustion and heavy hydrocarbon naphtha vapor injection techniques in a heavy oil reservoir were investigated. Oil production rates and steam injection efficiencies were considered. The technique was also combined with toe-to-heel air injection (THAI) processes. The study showed that the modified THAI process achieved high rates of recovery for both primary production and as a follow-up technique in partially depleted reservoirs after cyclic steam and cold production. Oil produced using the modified THAI technique was also partially upgraded by the process. Results of the vapour chamber pressure calculations showed that the volume of oil produced by naphtha assisted gravity drainage was between 1 to 3 times higher than amounts of oil produced by SAGD processes during the same amount of time. The naphtha injection process produced more oil than the steam only process. However, high amounts of naphtha were needed to produce oil. Injection and production rates during the naphtha injection process were higher. Naphtha vapor was injected near the heel of a horizontal producer well. The vapor acted as a thermal and diluent mechanism in order to reduce the viscosity of the heavy oil . 9 refs., 4 tabs., 6 figs.

  11. Influence of pre-injection control parameters on main-injection fuel quantity for an electronically controlled double-valve fuel injection system of diesel engine

    Science.gov (United States)

    Song, Enzhe; Fan, Liyun; Chen, Chao; Dong, Quan; Ma, Xiuzhen; Bai, Yun

    2013-09-01

    A simulation model of an electronically controlled two solenoid valve fuel injection system for a diesel engine is established in the AMESim environment. The accuracy of the model is validated through comparison with experimental data. The influence of pre-injection control parameters on main-injection quantity under different control modes is analyzed. In the spill control valve mode, main-injection fuel quantity decreases gradually and then reaches a stable level because of the increase in multi-injection dwell time. In the needle control valve mode, main-injection fuel quantity increases with rising multi-injection dwell time; this effect becomes more obvious at high-speed revolutions and large main-injection pulse widths. Pre-injection pulse width has no obvious influence on main-injection quantity under the two control modes; the variation in main-injection quantity is in the range of 1 mm3.

  12. Small-Volume Injections: Evaluation of Volume Administration Deviation From Intended Injection Volumes.

    Science.gov (United States)

    Muffly, Matthew K; Chen, Michael I; Claure, Rebecca E; Drover, David R; Efron, Bradley; Fitch, William L; Hammer, Gregory B

    2017-10-01

    In the perioperative period, anesthesiologists and postanesthesia care unit (PACU) nurses routinely prepare and administer small-volume IV injections, yet the accuracy of delivered medication volumes in this setting has not been described. In this ex vivo study, we sought to characterize the degree to which small-volume injections (≤0.5 mL) deviated from the intended injection volumes among a group of pediatric anesthesiologists and pediatric postanesthesia care unit (PACU) nurses. We hypothesized that as the intended injection volumes decreased, the deviation from those intended injection volumes would increase. Ten attending pediatric anesthesiologists and 10 pediatric PACU nurses each performed a series of 10 injections into a simulated patient IV setup. Practitioners used separate 1-mL tuberculin syringes with removable 18-gauge needles (Becton-Dickinson & Company, Franklin Lakes, NJ) to aspirate 5 different volumes (0.025, 0.05, 0.1, 0.25, and 0.5 mL) of 0.25 mM Lucifer Yellow (LY) fluorescent dye constituted in saline (Sigma Aldrich, St. Louis, MO) from a rubber-stoppered vial. Each participant then injected the specified volume of LY fluorescent dye via a 3-way stopcock into IV tubing with free-flowing 0.9% sodium chloride (10 mL/min). The injected volume of LY fluorescent dye and 0.9% sodium chloride then drained into a collection vial for laboratory analysis. Microplate fluorescence wavelength detection (Infinite M1000; Tecan, Mannedorf, Switzerland) was used to measure the fluorescence of the collected fluid. Administered injection volumes were calculated based on the fluorescence of the collected fluid using a calibration curve of known LY volumes and associated fluorescence.To determine whether deviation of the administered volumes from the intended injection volumes increased at lower injection volumes, we compared the proportional injection volume error (loge [administered volume/intended volume]) for each of the 5 injection volumes using a linear

  13. J-regular rings with injectivities

    OpenAIRE

    Shen, Liang

    2010-01-01

    A ring $R$ is called a J-regular ring if R/J(R) is von Neumann regular, where J(R) is the Jacobson radical of R. It is proved that if R is J-regular, then (i) R is right n-injective if and only if every homomorphism from an $n$-generated small right ideal of $R$ to $R_{R}$ can be extended to one from $R_{R}$ to $R_{R}$; (ii) R is right FP-injective if and only if R is right (J, R)-FP-injective. Some known results are improved.

  14. Injection moulding for macro and micro products

    DEFF Research Database (Denmark)

    Islam, Mohammad Aminul

    used for macro products but with the ages it is going deep into the micro areas having machine and process improvements. Extensive research work on injection moulding is going on all over the world. New ideas are flowing into the machines, materials and processes. The technology has made significant......The purpose of the literature survey is to investigate the injection moulding technology in the macro and micro areas from the basic to the state-of-the-art recent technology. Injection moulding is a versatile production process for the manufacturing of plastic parts and the process is extensively...

  15. Vibration of safety injection pump motors

    Energy Technology Data Exchange (ETDEWEB)

    Wattrelos, D.

    1996-12-01

    This paper covers a fault encountered in the safety injection pump motors of the French 900 MWe unit nuclear power stations. This fault was not revealed either during the low pressure safety injection and containment spray system pump qualification tests under accident conditions or during the special tests on a test bench carried out to attempt to replicate the fault and to identify ways of remedying it. This constitutes a potential common mode of failure of the safety injection system and the containment spray system pumps. The vibration phenomena illustrate the importance of carrying out tests in the plants under conditions as close as possible to those of actual accident situations.

  16. Dynamics of optically-injected semiconductor nanolasers

    Science.gov (United States)

    Sarraute, J.-M.; Schires, K.; LaRochelle, S.; Grillot, F.

    2016-03-01

    We propose a novel rate equation model of an optically-injected semiconductor nanolaser based on an expression of the complex electric field including a novel spontaneous emission term. The latter takes into account the amplification of the zero-point energy of the field as well as the Purcell effect. The modulation response of the optically injection-locked nanolaser is studied for the first time using a small-signal analysis of the model. We then investigate the injection map of the nanolaser and study the 3-dB bandwidth of the nanolaser inside the locking region.

  17. Accidental Intrathecal Injection of Tranexamic Acid

    Directory of Open Access Journals (Sweden)

    Khaled Mahmoud

    2012-01-01

    Full Text Available Tranexamic acid (TXA is a popular antifibrinolytic drug that is commonly used in patients with bleeding disorder. Major morbidities and mortalities have been reported following inadvertent intrathecal injection of TXA. In this paper, inadvertent intrathecal injection of TXA has resulted from similarities in appearance between TXA and heavy bupivacaine 0.5% ampoules. The patient experienced severe pain in the back and gluteal region upon injection in association with systemic hypertension and tachycardia followed by generalized myoclonic seizures and ventricular fibrillation.

  18. Injectable, Biodegradable Hydrogels for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Huaping Tan

    2010-03-01

    Full Text Available Hydrogels have many different applications in the field of regenerative medicine. Biodegradable, injectable hydrogels could be utilized as delivery systems, cell carriers, and scaffolds for tissue engineering. Injectable hydrogels are an appealing scaffold because they are structurally similar to the extracellular matrix of many tissues, can often be processed under relatively mild conditions, and may be delivered in a minimally invasive manner. This review will discuss recent advances in the field of injectable hydrogels, including both synthetic and native polymeric materials, which can be potentially used in cartilage and soft tissue engineering applications.

  19. Massive Preperitoneal Hematoma after a Subcutaneous Injection

    Directory of Open Access Journals (Sweden)

    Hideki Katagiri

    2016-01-01

    Full Text Available Preperitoneal hematomas are rare and can develop after surgery or trauma. A 74-year-old woman, receiving systemic anticoagulation, developed a massive preperitoneal hematoma after a subcutaneous injection of teriparatide using a 32-gauge, 4 mm needle. In this patient, there were two factors, the subcutaneous injection of teriparatide and systemic anticoagulation, associated with development of the hematoma. These two factors are especially significant, because they are widely used clinically. Although extremely rare, physicians must consider this potentially life-threatening complication after subcutaneous injections, especially in patients receiving anticoagulation.

  20. Innovative Drug Injection via Laser Induced Plasma

    Science.gov (United States)

    Han, Tae-hee; Yoh, Jack J.

    2010-10-01

    A laser based needle-free liquid drug injection device has been developed. A laser beam is focused inside the liquid contained in the rubber chamber of micro scale. The focused laser beam causes explosive bubble growth and the sudden volume increase in a sealed chamber drives a microjet of liquid drug through the micronozzle. The exit diameter of the nozzle is 125 um and the injected microjet reaches an average velocity of 264 m/s. This device adds the time-varying feature of microjet to the current state of liquid injection for drug delivery.

  1. Dependency injection with AngularJS

    CERN Document Server

    Knol, Alex

    2013-01-01

    This book is a practical, hands-on approach to using dependency injection and implementing test-driven development using AngularJS. Dependency Injection with AngularJS is aimed at developers who are aware of AngularJS but need to get started with using it in real life applications. Also, developers who want to get into test-driven development with AngularJS can use this book as practical guide. Even if you know about dependency injection, it can serve as a good reference on how it is used within AngularJS. Readers are expected to have some experience with JavaScript.

  2. Worldwide Injection Technique Questionnaire Study: Injecting Complications and the Role of the Professional.

    Science.gov (United States)

    Frid, Anders H; Hirsch, Laurence J; Menchior, Astrid R; Morel, Didier R; Strauss, Kenneth W

    2016-09-01

    From February 1, 2014, through June 30, 2015, 13,289 insulin-injecting patients from 423 centers in 42 countries participated in one of the largest surveys ever performed in diabetes. The first results of this survey are published elsewhere in this issue. Herein we report that the most common complication of injecting insulin is lipohypertrophy (LH), which was self-reported by 29.0% of patients and found by physical examination in 30.8% by health care professionals (HCPs). Patients with LH consumed a mean of 10.1 IU more insulin daily than patients without LH. Glycated hemoglobin levels averaged 0.55% higher in patients with vs without LH. Lipohypertrophy was associated with higher rates of unexplained hypoglycemia and glycemic variability as well as more frequent diabetic ketoacidosis, incorrect rotation of injection sites, use of smaller injection zones, longer duration of insulin use, and reuse of pen needles (each P<.05). Routine inspection of injection sites by the HCP was associated with lower glycated hemoglobin levels, less LH, and more correct injection site rotation. Patients were also more likely to rotate correctly if they received injection instructions from their HCP in the past 6 months. Fewer than 40% of patients claimed to have gotten such instructions in the past 6 months, and 10% said that they have never received training on how to inject correctly despite injecting for a mean of nearly 9 years. Use of these data should stimulate renewed commitment to optimizing insulin injection practices.

  3. Global epidemiology of injecting drug use and HIV among people who inject drugs: a systematic review.

    Science.gov (United States)

    Mathers, Bradley M; Degenhardt, Louisa; Phillips, Benjamin; Wiessing, Lucas; Hickman, Matthew; Strathdee, Steffanie A; Wodak, Alex; Panda, Samiran; Tyndall, Mark; Toufik, Abdalla; Mattick, Richard P

    2008-11-15

    Injecting drug use is an increasingly important cause of HIV transmission in most countries worldwide. Our aim was to determine the prevalence of injecting drug use among individuals aged 15-64 years, and of HIV among people who inject drugs. We did a systematic search of peer-reviewed (Medline, EmBase, and PubMed/BioMed Central), internet, and grey literature databases; and data requests were made to UN agencies and international experts. 11 022 documents were reviewed, graded, and catalogued by the Reference Group to the UN on HIV and Injecting Drug Use. Injecting drug use was identified in 148 countries; data for the extent of injecting drug use was absent for many countries in Africa, the Middle East, and Latin America. The presence of HIV infection among injectors had been reported in 120 of these countries. Prevalence estimates of injecting drug use could be ascertained for 61 countries, containing 77% of the world's total population aged 15-64 years. Extrapolated estimates suggest that 15.9 million (range 11.0-21.2 million) people might inject drugs worldwide; the largest numbers of injectors were found in China, the USA, and Russia, where mid-estimates of HIV prevalence among injectors were 12%, 16%, and 37%, respectively. HIV prevalence among injecting drug users was 20-40% in five countries and over 40% in nine. We estimate that, worldwide, about 3.0 million (range 0.8-6.6 million) people who inject drugs might be HIV positive. The number of countries in which the injection of drugs has been reported has increased over the last decade. The high prevalence of HIV among many populations of injecting drug users represents a substantial global health challenge. However, existing data are far from adequate, in both quality and quantity, particularly in view of the increasing importance of injecting drug use as a mode of HIV transmission in many regions.

  4. Acute anaphylactic reaction to expired chlorpheniramine injection

    Institute of Scientific and Technical Information of China (English)

    Beuy Joob; Viroj Wiwanitkit

    2014-01-01

    Chlorpheniramine is a widely used drug for management of allergic reaction.The serious adverse reaction to this drug is extremely rare.In this report, the authors present a case of acute anaphylactic reaction to expired chlorpheniramine injection.

  5. A Multi-Layered Needle Injection Simulator.

    Science.gov (United States)

    Laufer, Shlomi; Kempton, Steve J; Maciolek, Kimberly; Terry, Aliyya; Ray, Rebeca D; Pugh, Carla M; Afifi, Ahmed M

    2016-01-01

    Insuring correct needle location is crucial in many medical procedures. This can be even more challenging for physicians injecting in a new location for the first time. Since they do not necessarily know how the tissue is supposed to feel, finding the correct location and correct depth can be difficult. In this study we designed a simulator for training needle injection. The simulator was fabricated to give a realistic feeling of injecting Botox® in the temporalis and the semispinalis muscles as part of migraine treatment. In addition the simulator provided real-time feedback of correct needle location. Nine residents and medical students evaluated the simulator. They made several errors that were corrected real time using the real time feedback provided. They found the simulator to be very useful and that the training significantly improved their confidence. The methods described in this study can easily be implemented for developing needle injection simulators for other anatomical locations.

  6. LHC injection optics measurements at commissioning (2015)

    CERN Document Server

    Garcia-Tabares Valdivieso, Ana; Coello De Portugal - Martinez Vazquez, Jaime Maria; Garcia-Bonilla, Alba-Carolina; Langner, Andy Sven; Maclean, Ewen Hamish; Malina, Lukas; Mcateer, Meghan Jill; Persson, Tobias Hakan Bjorn; Skowronski, Piotr Krzysztof; Tomas Garcia, Rogelio; CERN. Geneva. ATS Department

    2016-01-01

    This report describes the measurement and correction process followed during the 2015 LHC injection optics commissioning which extended into Machine Developments (MDs). Results have been analyzed and compared to the 2012 measurements.

  7. Static Stress Analysis of Security Injection Tank

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The static structural analysis of the security injection tank is made to make sure whether the tank can withstand concerned loads or not on all conditions conforming to concerned code prescripts and design requirements. The tanks

  8. Acute anaphylactic reaction to expired chlorpheniramine injection

    Directory of Open Access Journals (Sweden)

    Beuy Joob

    2014-01-01

    Full Text Available Chlorpheniramine is a widely used drug for management of allergic reaction. The serious adverse reaction to this drug is extremely rare. In this report, the authors present a case of acute anaphylactic reaction to expired chlorpheniramine injection.

  9. Characteristics of pellet injected discharges in TEXTOR

    Energy Technology Data Exchange (ETDEWEB)

    Finken, K.H. [Institut fuer Plasmaphysik, Forschungszentrum Juelich GmbH, Assocition Euratom-KFA, 52425 Juelich (Germany); Sato, K.N. [National Institute for Fusion Science, Nagoya 464-01 (Japan); Akiyama, H. [Kumamoto University, Kumamoto 860 (Japan); Fuchs, G.; Jaspers, R. [Institut fuer Plasmaphysik, Forschungszentrum Juelich GmbH, Assocition Euratom-KFA, 52425 Juelich (Germany); Kogoshi, S. [Science University of Tokyo, Noda 278 (Japan); Koslowski, H.R.; Mank, G. [Institut fuer Plasmaphysik, Forschungszentrum Juelich GmbH, Assocition Euratom-KFA, 52425 Juelich (Germany); Sakakita, H.; Sakamoto, M. [National Institute for Fusion Science, Nagoya 464-01 (Japan); Sander, M.; Soltwisch, H. [Institut fuer Plasmaphysik, Forschungszentrum Juelich GmbH, Assocition Euratom-KFA, 52425 Juelich (Germany)

    1995-09-01

    Pellets injected into the TEXTOR tokamak lead to a density profile peaking which is strongest at low plasma current and weakest at high current independent of {ital B}{sub {ital T}}. After the injection two types of density oscillations are excited, the first type follows immediately the injection and the second one is excited with a delay of more than ten milliseconds. The oscillations are also observed in runaway discharges; the synchrotron light from the relativistic electrons drops after the pellet injection and is subsequently modulated due to a trapping of the runaways in magnetic islands. First Faraday measurements have been performed indicating that the distribution of the plasma current is not measurably modified by the pellet. {copyright} {ital 1995 American Institute of Physics.}

  10. Injection molded optical backplane for broadcast architecture

    Science.gov (United States)

    Rosenberg, Paul; Mathai, Sagi; Sorin, Wayne V.; McLaren, Moray; Straznicky, Joseph; Panotopoulos, Georgios; Warren, David; Morris, Terry; Tan, Michael R. T.

    2012-01-01

    A low cost, blind mate, injection molded optical backplane is presented. The optical backplane is comprised of 12 channel optical broadcast buses, operating at 10Gbps/channel with six blindmate optical output ports spaced 1U apart.

  11. Region 6 Underground Injection Control (UIC) Program

    Data.gov (United States)

    U.S. Environmental Protection Agency — This is now a storage and retrieval application. Permit information and enforcement information of Underground Injection Wells are scanned and stored as a part of...

  12. 21 CFR 522.2220 - Sulfadimethoxine injection.

    Science.gov (United States)

    2010-04-01

    ... disease caused by Streptococcus equi (strangles). (b) It is administered by intravenous injection at an... complex, bacterial pneumonia, calf diphtheria, and foot-rot. (b) It is administered by...

  13. Acid gas injection : reservoir engineering considerations

    Energy Technology Data Exchange (ETDEWEB)

    Pooladi-Darvish, M. [Fekete Associates Inc., Calgary, AB (Canada); Calgary Univ., AB (Canada)

    2009-07-01

    This study discussed reservoir engineering considerations related to acid gas injection, including the effects of pressure. A map of acid gas injection sites in Alberta was presented. The WASP Nisku acid gas project is a carbon dioxide (CO{sub 2}) sequestration project located in a dolomitized aquifer close to coal-fired power plants. Analytical solutions developed at the site include a multi-well injectivity procedure for infinite reservoirs. Analytical considerations at the site included low water compressibility, strong interference, and a lack of flow boundaries. Chromatographic separation techniques were used to address the compositional effects of the reservoir in relation to the injection wells. Techniques developed at the CO{sub 2} sequestration sites are being used to develop procedures for acid gas storage in depleted gas pools and beneath the ocean floor. tabs., figs.

  14. IMAGE ANALYSIS DEDICATED TO POLYMER INJECTION MOLDING

    Directory of Open Access Journals (Sweden)

    David Garcia

    2011-05-01

    Full Text Available This work follows the general framework of polymer injection moulding simulation whose objectives are the mastering of the injection moulding process. The models of numerical simulation make it possible to predict the propagation of the molten polymer during the filling phase from the positioning of one point of injection or more. The objective of this paper is to propose a particular way to optimize the geometry of mold cavity in accordance with physical laws. A direct correlation is pointed out between geometric parameters issued from skeleton transformation and Hausdorff's distance and results provided by implementation of a classical model based on the Hele-Shaw equations which are currently used in the main computer codes of polymer injection.

  15. Interferon Beta-1a Intramuscular Injection

    Science.gov (United States)

    Interferon beta-1a intramuscular injection is used to reduce the number of episodes of symptoms and slow ... and problems with vision, speech, and bladder control). Interferon beta-1a is in a class of medications ...

  16. Interferon Beta-1a Subcutaneous Injection

    Science.gov (United States)

    Interferon beta-1a subcutaneous injection is used to reduce episodes of symptoms and slow the development of ... and problems with vision, speech, and bladder control). Interferon beta-1a is in a class of medications ...

  17. Can Botox Injections Relieve Arthritis Pain?

    Science.gov (United States)

    ... References Hameed F, et al. Injectable medications for osteoarthritis. PM&R. 2012;4(suppl):S75. Singh JA, et al. Botulinum toxin for shoulder pain. Cochrane Database of Systematic Reviews. http://onlinelibrary. ...

  18. Injection site reactions after subcutaneous oligonucleotide therapy

    NARCIS (Netherlands)

    van Meer, L. (Leonie); M. Moerland (Matthijs); Gallagher, J. (Jolie); M.B.A. van Doorn (Martijn); E.P. Prens (Errol); A.F. Cohen; Rissmann, R. (Robert); J. Burggraaf (Jacobus)

    2016-01-01

    textabstractOligonucleotides (ONs) are short fragments of nucleic acids, currently being investigated as therapeutic agents. When administered subcutaneously (sc), ONs cause a specific local reaction originating around the injection site, such as erythema, itching, discomfort and pain, including

  19. AA injection kicker in its tank

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    For single-turn injection of the antiprotons, a septum at the end of the injection line made the beam parallel to the injection orbit, and a quarter of a betatron-wavelength downstream a fast kicker corrected the angle. Kicker type: lumped delay line. PFN voltage 56 kV. Bending angle 7.5 mrad; kick-strength 0.9 Tm; fall-time 95%-5% in 150 ns. The injection orbit is to the left, the stack orbit to the far right. A fast shutter near the central orbit had to be closed before the kicker fired, so as to protect the stack core from being shaken by the kicker's fringe field. The shutter is shown in closed position.

  20. Optimizing reversible simulation of injective functions

    DEFF Research Database (Denmark)

    Yokoyama, Tetsuo; Axelsen, Holger Bock; Glück, Robert

    2012-01-01

    Bennett showed that a clean reversible simulation of injective programs is possible without returning the input of a program as additional output. His method involves two computation and two uncomputation phases. This paper proposes an optimization of Bennett’s simulation that requires only half ......-coding program is further optimized by conserving the model over the text-generation phase. This paper may thus provide a newviewon developing efficient reversible simulations for a certain class of injective functions....

  1. Dimethyl Ether in Diesel Fuel Injection Systems

    DEFF Research Database (Denmark)

    Sorenson, Spencer C.; Glensvig, M.; Abata, D. L.

    1998-01-01

    A study of the behaviour of DME in diesel injection systems. A discussion of the effects of compressibility of DME on compression work and wave propagation.DME spray shapes and penetration rates......A study of the behaviour of DME in diesel injection systems. A discussion of the effects of compressibility of DME on compression work and wave propagation.DME spray shapes and penetration rates...

  2. Injectable Hydrogel Scaffold from Decellularized Human Lipoaspirate

    OpenAIRE

    Young, D. Adam; Ibrahim, Dina O.; Hu, Diane; Christman, Karen L.

    2010-01-01

    Soft tissue fillers are rapidly gaining popularity for aesthetic improvements or repair of adipose tissue deficits. Several injectable biopolymers have been investigated for this purpose but often face rapid resorption or limited adipogenesis, and do not mimic the native adipose extracellular matrix (ECM). We have generated an injectable adipose matrix scaffold by efficiently removing both the cellular and lipid contents of human lipoaspirate. The decellularized material retained a complex co...

  3. 21 CFR 522.1680 - Oxytocin injection.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Oxytocin injection. 522.1680 Section 522.1680 Food... Oxytocin injection. (a) Specifications. Each milliliter (mL) of solution contains 20 USP units oxytocin. (b... Cows 0.5 to 1.0 10 to 20. Sows 0.25 to 1.0 5 to 20. (2) Indications for use. Oxytocin may be used as...

  4. Paraplegia After Thoracic Epidural Steroid Injection.

    Science.gov (United States)

    Loomba, Vivek; Kaveeshvar, Hirsh; Dwivedi, Samvid

    2016-09-01

    Epidural steroid injections are a common procedure performed by pain physicians. The American Society of Regional Anesthesia along with several other groups recently provided guidelines for performing epidural injections in the setting of anticoagulants. We present a case of a patient who developed an epidural hematoma and subsequent paraplegia despite strict adherence to these guidelines. Although new guidelines serve to direct practice, risks of devastating neurologic complications remain as evidenced by our case.

  5. Injection Efficiency Monitor for the Australian Synchrotron

    Directory of Open Access Journals (Sweden)

    Rassool R. P.

    2012-10-01

    Full Text Available The Australian Synchrotron AS is moving towards a continuous injection mode called top-up. During top-up the linac and booster synchrotron injection system will be in continuous operation rather than usedevery eight hours the way they are used at present. In order to monitor the performance of the injection system areal-time injection efficiency monitoring system has been developed. The system consists of several Fast CurrentTransformers [1] and matching digitisers [2] and is designed to count every beam pulse and measure the transmission efficiency through the whole accelerator complex. After calibrating the system using a properly matchedFaraday Cup at the electron gun, a transmission efficiency is then calculated at each stage of transferring the beamfrom 90 keV out of the gun to 3 GeV in the storage ring. The system is used to optimise the injection process inorder to maximise the injection efficiency and as an early warning system when equipment starts to fail and theinjection efficiency decreases.

  6. Epidural steroid injection for lumbosacral radiculopathy

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Mi Sook [The Catholic University of Korea, Pucheon (Korea, Republic of)

    2006-06-15

    Low back pain combined with radicular pain remains as one of the most challenging musculoskeletal problems for its therapeutic management. This malady results from nerve root impingement and/or inflammation that causes neurologic symptoms in the distribution of the affected nerve root(s) Conservative treatment, percutaneous spine interventions and surgery have all been used as treatment; and the particular treatment that's chosen depends on the severity of the clinical and neurologic presentation. In 1930, Evans reported that sciatica could treated by epidural injection. The use of epidural corticosteroid injections for the treatment of axial and radicular back pain was first reported in 1953. Epidural steroid injections are currently used by many medical professionals for the treatment of lumbosacral radiculopathy. Performing 'blind' epidural steroid injection lacks target specificity that often results in incorrect delivery of medication to the lesion. Imaging-guided steroid injections are now becoming more popular despite the controversy regarding their efficacy. Many reports, including a few randomized controlled trials, have documented the clinical utility of epidural steroid injections.

  7. FROZEN SHOULDER TREATMENT: TRIAMCENALONE OR METHYLPREDNISOLONE INJECTION

    Directory of Open Access Journals (Sweden)

    Sanjib

    2015-10-01

    Full Text Available OBJECTIVE: To compare the effectiveness of Triamcinolone acetonide [40mg] and Methylprednisolone acetate [40mg] in 210 patients attending the Outpatient Department of Orthopedics of FAAMCH Barpeta with primary and secondary frozen shoulder. METHODS: A total number o f 210 patients with frozen shoulder who attended the Outpatient clinic of Orthopedics at FAAMCH from Jan 2013 to Jan 2015 were enrolled in our study. The diagnosis of frozen shoulder was made using the guidelines for shoulder complain issued by the Dutch C ollege of General Practitioners. Intra - articular injections of Triamcinolone acetonide [40mg] was used in 110 patients [ M ale - 50, female - 60] and 40mg Methylprednisolone was given to 100 patients [M ale - 35, female 65]. Injection was repeated every 3 weeks [ N o t more than 3 injections] by the posterior route. RESULTS: Triamcinolone acetonide was found to be more effective in diabetic patients with frozen shoulder in comparison to Methyprednisolone acetate. Triamcinolone acetonide was found to be more effective i n those patients presenting with severe grades of frozen shoulder and also these patients required lesser number of injections compared to Methylprednisolone acetate. However both Triamcinolone acatonide and Methyprednisolone were equally effective in prim ary frozen shoulder. CONCLUSION: We conclude that Triamcinolone acetonide and Methylprednisolone acetate are effective in the treatment of painful stiff shoulder; however injection Triamcinolone acetonide is a superior alternative in the treatment of diabe tics with frozen shoulder & resistant cases, with less number of injections.

  8. Liquid fuel injection elements for rocket engines

    Science.gov (United States)

    Cox, George B., Jr. (Inventor)

    1993-01-01

    Thrust chambers for liquid propellant rocket engines include three principal components. One of these components is an injector which contains a plurality of injection elements to meter the flow of propellants at a predetermined rate, and fuel to oxidizer mixture ratio, to introduce the mixture into the combustion chamber, and to cause them to be atomized within the combustion chamber so that even combustion takes place. Evolving from these injectors are tube injectors. These tube injectors have injection elements for injecting the oxidizer into the combustion chamber. The oxidizer and fuel must be metered at predetermined rates and mixture ratios in order to mix them within the combustion chamber so that combustion takes place smoothly and completely. Hence tube injectors are subject to improvement. An injection element for a liquid propellant rocket engine of the bipropellant type is provided which includes tangential fuel metering orifices, and a plurality of oxidizer tube injection elements whose injection tubes are also provided with tangential oxidizer entry slots and internal reed valves.

  9. Orthogonal ion injection apparatus and process

    Science.gov (United States)

    Kurulugama, Ruwan T; Belov, Mikhail E

    2014-04-15

    An orthogonal ion injection apparatus and process are described in which ions are directly injected into an ion guide orthogonal to the ion guide axis through an inlet opening located on a side of the ion guide. The end of the heated capillary is placed inside the ion guide such that the ions are directly injected into DC and RF fields inside the ion guide, which efficiently confines ions inside the ion guide. Liquid droplets created by the ionization source that are carried through the capillary into the ion guide are removed from the ion guide by a strong directional gas flow through an inlet opening on the opposite side of the ion guide. Strong DC and RF fields divert ions into the ion guide. In-guide orthogonal injection yields a noise level that is a factor of 1.5 to 2 lower than conventional inline injection known in the art. Signal intensities for low m/z ions are greater compared to convention inline injection under the same processing conditions.

  10. Minimization of sink mark defects in injection molding process ...

    African Journals Online (AJOL)

    Minimization of sink mark defects in injection molding process – Taguchi approach. ... plays a very important role in controlling the quality of the injection molded products. ... of injection molding variables on sink marks using Taguchi approach.

  11. Spin Injection from Ferromagnetic Metal Directly into Non-Magnetic Semiconductor under Different Injection Currents

    Institute of Scientific and Technical Information of China (English)

    DENG Ning; TANG Jian-Shi; ZHANG Lei; ZHANG Shu-Chao; CHEN Pei-Yi

    2010-01-01

    @@ For ferromagnetic metal(FM)/semiconductor(SC)structure with ohmic contact,the effect of carrier polarization in the semiconductor combined with drift part of injection current on current polarization is investigated.Based on the general model we established here,spin injection efficiency under different injection current levels is calculated.Under a reasonable high injection current,current polarization in the semiconductor is actually much larger than that predicted by the conductivity mismatch model because the effect of carrier polarization is enhanced by the increasing drift current.An appreciable current polarization of 1% could be achieved for the FM/SC structure via ohmic contact,which means that efficient spin injection from FM into SC via ohmic contact is possible.The reported dependence of current polarization on temperature is verified quantitatively.To achieve even larger spin injection efficiency,a gradient doping semiconductor is suggested to enhance the drift current effect.

  12. Low-Frequency Heroin Injection among Out-of-Treatment, Street-Recruited Injection Drug Users

    OpenAIRE

    Harris, Jennie L.; Lorvick, Jennifer; Wenger, Lynn; Wilkins, Tania; Iguchi, Martin Y.; Bourgois, Philippe; Kral, Alex H.

    2012-01-01

    In this paper, we explore the understudied phenomenon of “low-frequency” heroin injection in a sample of street-recruited heroin injectors not in drug treatment. We conducted a cross-sectional study of 2,410 active injection drug users (IDUs) recruited in San Francisco, California from 2000 to 2005. We compare the sociodemographic characteristics and injection risk behaviors of low-frequency heroin injectors (low-FHI; one to 10 self-reported heroin injections in the past 30 days) to high-freq...

  13. Application of Gaseous Sphere Injection Method for Modeling Under-expanded H2 Injection

    Energy Technology Data Exchange (ETDEWEB)

    Whitesides, R; Hessel, R P; Flowers, D L; Aceves, S M

    2010-12-03

    A methodology for modeling gaseous injection has been refined and applied to recent experimental data from the literature. This approach uses a discrete phase analogy to handle gaseous injection, allowing for addition of gaseous injection to a CFD grid without needing to resolve the injector nozzle. This paper focuses on model testing to provide the basis for simulation of hydrogen direct injected internal combustion engines. The model has been updated to be more applicable to full engine simulations, and shows good agreement with experiments for jet penetration and time-dependent axial mass fraction, while available radial mass fraction data is less well predicted.

  14. Botulinum Toxin Injections: A Treatment for Muscle Spasms

    Science.gov (United States)

    ... Your Health Resources Drugs, Procedures & Devices Procedures & Devices Botulinum Toxin Injections: A Treatment for Muscle Spasms Botulinum Toxin Injections: A Treatment for Muscle Spasms Drugs, Procedures & ...

  15. Detection Block Model for SQL Injection Attacks

    Directory of Open Access Journals (Sweden)

    Diksha G. Kumar

    2014-10-01

    Full Text Available With the rapid development of Internet, more and more organizations connect their databases to the Internet for resource sharing. However, due to developers' lack of knowledge of all possible attacks, web applications become vulnerable to multiple attacks. Thus the network databases could face multiple threats. Web applications generally consist of a three tier architecture where database is in the third pole, which is the most valuable asset in any organization. SQL injection is an attack technique in which specially crafted input string is entered in user input field. It is submitted to server and result is returned to the user. In SQL injection vulnerability, the database server is forced to execute malicious operations which may cause the data loss or corruption, denial of access, and unauthentic access to sensitive data by crafting specific inputs. An attacker can directly compromise the database, and that is why this is a most threatening web attack. SQL injection attack occupies first position in top ten vulnerabilities as specified by Open Web Application Security Project. It is probably the most common Website vulnerability today. Current scenarios which provide solutions to SQL injection attack either have limited scope i.e. can’t be implemented across all platforms, or do not cover all types of SQL injection attacks. In this work we implement Message Authentication Code (MAC based solution against SQL injection attacks. The model works both on client and server side. Client side implements a filter function and server side is based on information theory. MAC of static and dynamic queries is compared to detect SQL injection attack.

  16. Residual stress distribution in injection molded parts

    Directory of Open Access Journals (Sweden)

    P. Postawa

    2006-08-01

    Full Text Available Purpose: The paper presents the results of the investigations of influence of the amorphous polystyrene (PSprocessing on the diversity of the internal stresses observed in the injection moulded piece.Design/methodology/approach: For the tests, the standardized mould piece designed for the investigations ofthe processing shrinkage of thermoplastics materials has been used. The samples have been prepared using theDesign of Experiment (DoE theory.The state of internal stresses has been analysed by means of photoelastic method (used stress viewer equipmenton the basis of the layout and size of the isochromatics (fields with the same colour, which determine the mouldpiece’s areas where the same value for the difference of main tensions. In the article the results of investigationsof influence of 5 chosen processing parameters such as injection temperature Tw, mould temperature Tf,clamping pressure pd, cooling time tch and the injection speed vw on the changes in isochromatics layout as adeterminant for diversity of internal stresses in injection moulded pieces have been presented.Findings: The performed investigations of the influence of injection conditions on the state of internal stressesreached for injection mould pieces were to determine the parameters of injection at which the achieved state ofthe stresses in the mould piece (described by the difference of main tensions will show the lowest values.Practical implications: Effects of examinations of influence of processing conditions on residual stress ininjection molded parts (presented in the article could find practical application in polymer industry, both smalland large enterprises.Originality/value: New approach to fast estimation of value of residual stresses were present in the paper.

  17. Ultrasound-guided botulinum toxin injections

    Directory of Open Access Journals (Sweden)

    S. E. Khatkova

    2016-01-01

    Full Text Available One of the key conditions for achieving the desirable result during botulinum toxin therapy for muscular dystonia, spasticity, and other diseases accompanied by spasm, pain, and autonomic dysfunction (dystonias, spasticity, etc. is the proper administration of the agent into the muscles directly involved in the pathological process. The exact entry of botulinum toxin into the target muscles is essential for successful and safe treatment because its injection into a normal muscle may cause side effects. The most common errors are the incorrect depth and incorrect direction of a needle on insertion. Therefore, the exact injection of the agent particularly into the shallow and deep muscles is a difficult task even for an experienced specialist and requires the use of controlling methods.The European Consensus on Botulinum Toxin Therapy points out that various injection techniques are needed for the better identification of necessary muscles. However, there are currently no reports on the clear advantage of any technique. In our country, injections using palpation and anatomical landmarks have been widely used in routine practice so far; electromyographic monitoring and electrostimulation have been less frequently applied. In recent years, the new method ultrasound-guided injection has continued to grow more popular. This effective, accessible, and easy-to-use method makes it possible to manage a real-time injection process and to ensure the exact entry of the agent into the muscle. This paper is dedicated to a comparative analysis of different injection methods and to a description of the ultrasound-guided technique and its advantages over others. 

  18. Measuring tissue back-pressure--in vivo injection forces during subcutaneous injection.

    Science.gov (United States)

    Allmendinger, Andrea; Mueller, Robert; Schwarb, Edward; Chipperfield, Mark; Huwyler, Joerg; Mahler, Hanns-Christian; Fischer, Stefan

    2015-07-01

    Limited information is available on injection forces of parenterals representing the in vivo situation. Scope of the present study was to investigate the contribution of the subcutaneous (sc) tissue layer to injection forces during in vivo injection. Göttingen minipigs received injections of isotonic dextran solutions (1-100 mPas) into the plica inguinalis using different injection rates and volumes (0.025-0.2 mL/s and 2.5 vs. 4.5 mL). The contribution of the sc back-pressure to injection forces was found to increase linearly with viscosity and injection rate ranging from 0.6 ± 0.5 N to 1.0 ± 0.4 N (1 mPas), 0.7 ± 0.2 N to 2.4 ± 1.9 N (10 mPas), and 1.8 ± 0.6 N to 4.7 ± 3.3 N (20 mPas) for injection rates of 0.025 to 0.2 mL/s, respectively. Variability increased with viscosity and injection rate. Values are average values from 10 randomized injections. A maximum of 12.9 N was reached for 20 mPas at 0.2 mL/s; 6.9 ± 0.3 N was determined for 100 mPas at 0.025 mL/s. No difference was found between injection volumes of 2.5 and 4.5 mL. The contribution of the tissue was differentiated from the contribution of the injection device and a local temperature effect. This effect was leading to warming of the (equilibrated) sample in the needle, therefore smaller injection forces than expected compensating tissue resistance to some parts. When estimating injection forces representative for the in vivo situation, the contribution of the tissue has to be considered as well as local warming of the sample in the needle during injection.

  19. Procedural and Physical Interventions for Vaccine Injections

    Science.gov (United States)

    Shah, Vibhuti; McMurtry, C. Meghan; MacDonald, Noni E.; Ipp, Moshe; Riddell, Rebecca Pillai; Noel, Melanie; Chambers, Christine T.

    2015-01-01

    Background: This systematic review evaluated the effectiveness of physical and procedural interventions for reducing pain and related outcomes during vaccination. Design/Methods: Databases were searched using a broad search strategy to identify relevant randomized and quasi-randomized controlled trials. Data were extracted according to procedure phase (preprocedure, acute, recovery, and combinations of these) and pooled using established methods. Results: A total of 31 studies were included. Acute infant distress was diminished during intramuscular injection without aspiration (n=313): standardized mean difference (SMD) −0.82 (95% confidence interval [CI]: −1.18, −0.46). Injecting the most painful vaccine last during vaccinations reduced acute infant distress (n=196): SMD −0.69 (95% CI: −0.98, −0.4). Simultaneous injections reduced acute infant distress compared with sequential injections (n=172): SMD −0.56 (95% CI: −0.87, −0.25). There was no benefit of simultaneous injections in children. Less infant distress during the acute and recovery phases combined occurred with vastus lateralis (vs. deltoid) injections (n=185): SMD −0.70 (95% CI: −1.00, −0.41). Skin-to-skin contact in neonates (n=736) reduced acute distress: SMD −0.65 (95% CI: −1.05, −0.25). Holding infants reduced acute distress after removal of the data from 1 methodologically diverse study (n=107): SMD −1.25 (95% CI: −2.05, −0.46). Holding after vaccination (n=417) reduced infant distress during the acute and recovery phases combined: SMD −0.65 (95% CI: −1.08, −0.22). Self-reported fear was reduced for children positioned upright (n=107): SMD −0.39 (95% CI: −0.77, −0.01). Non-nutritive sucking (n=186) reduced acute distress in infants: SMD −1.88 (95% CI: −2.57, −1.18). Manual tactile stimulation did not reduce pain across the lifespan. An external vibrating device and cold reduced pain in children (n=145): SMD −1.23 (95% CI: −1.58, −0

  20. Oil injection into the blast furnace

    Energy Technology Data Exchange (ETDEWEB)

    Dongsheng Liao; Mannila, P.; Haerkki, J.

    1997-12-31

    Fuel injection techniques have been extensively used in the commercial blast furnaces, a number of publications concerning the fuels injection have been reported. This present report only summarizes the study achievements of oil injection due to the research need the of authors, it includes the following parts: First, the background and the reasons reducing coke rate of oil injection are analyzed. Reducing coke rate and decreasing the ironmaking costs are the main deriving forces, the contents of C, H and ash are direct reasons reducing coke rate. It was also found that oil injection had great effects on the state of blast furnace, it made operation stable, center gas flow develop fully, pressure drop increase, descent speed of burden materials decrease and generation of thermal stagnation phenomena, the quality of iron was improved. Based on these effects, as an ideal mean, oil injection was often used to adjust the state of blast furnace. Secondly, combustion behavior of oil in the raceway and tuyere are discussed. The distribution of gas content was greatly changed, the location of CO, H{sub 2} generation was near the tuyere; the temperature peak shifts from near the raceway boundary to the tuyere. Oxygen concentration and blast velocity were two important factors, it was found that increasing excess oxygen ratio 0.9 to 1.3, the combustion time of oil decreases 0.5 msec, an increase of the blast velocity results in increasing the flame length. In addition, the nozzle position and oil rate had large effects on the combustion of oil. Based on these results, the limit of oil injection is also discussed, soot formation is the main reason limiting to further increase oil injection rate, it was viewed that there were three types of soot which were generated under blast furnace operating conditions. The reason generating soot is the incomplete conversion of the fuel. Finally, three methods improving combustion of oil in the raceway are given: Improvement of oil

  1. Paediatric Blood-Injection-Injury Phobia

    Directory of Open Access Journals (Sweden)

    Beena Johnson

    2016-07-01

    Full Text Available Blood-Injection-Injury phobia is a major health issue throughout the life span. It usually starts in early childhood. Avoidance of health care is seen in such individuals. Children with blood injection injury phobia have uncontrollable fear of blood, injury, injections and needles. Because of the intense fear, these children will do everything possible to avoid it. Various physical symptoms including increased heart rate, chest discomfort, trembling movements, feeling of choking and syncope may occur in these children on mentioning about blood, needles or any injury. Vasovagal fainting with diphasic response pattern occurs in about twenty percent of children on exposure to the phobic stimulus. Other anxiety disorders, depressive disorders and attention deficit hyperactivity disorder also occur co-morbidly in children with blood-injection-injury phobia which makes the prognosis poor. Avoidance of health care due to phobia causes significant negative impact on health outcomes. Hence early diagnosis and urgent management of blood-injection-injury phobia in children is essential.

  2. [Temporomandibular joint arthropathy in situ steroid injection].

    Science.gov (United States)

    Gagé, J; Gallucci, A; Arnaud, M; Chossegros, C; Foletti, J M

    2016-09-01

    Temporomandibular disorders (TMDs) affect the masticatory muscles and the temporomandibular joints (TMJs). TMDs most often result from occlusal and/or muscular disorders and are then called primary or idiopathic TMDs. Less frequently, TMDs are related to local (trauma, infection) or general (rheumatoid arthritis) causes and are then called secondary TMDs. A little known iatrogenic cause of secondary TDM is the osteoarthritis that may be induced by intra-articular cortisone injections. We report one case of condylar lysis that occurred after one single intra-articular cortisone injection. A 62-years-old woman consulted for a long-lasting TMD on the left side manifesting itself through pain and noise. She benefited one year before from an intra-articular injection of cortisone by her rheumatologist for repeated closed lock of her left TMJ. Physical examination showed limited mouth opening with deviation on the left side. Lateral movements on the right side were impossible. The panoramic X-ray showed a condylar lysis on the left side that was on the CT scan. MRI additionally showed an anteriorly displaced and severely reshaped disc and an articular inflammation without intra-articular effusion. TMJ osteoarthritis secondary to unique or repeated intra-articular steroid injections are little-known. They are clinically expressed as typical TMDs and characterized on X-rays by condylar lysis and inflammation. Intra-articular injections of steroids are not totally harmless and other treatments must be preferred. Copyright © 2016. Published by Elsevier Masson SAS.

  3. Autologus Blood Injection for Recurrent Lateral Epicondylitis

    Directory of Open Access Journals (Sweden)

    M. Dehghani, M.D.

    2007-09-01

    Full Text Available Background and purpose: Tennis elbow is a common complaint. Several treatment strategies, such as corticosteroid injections and physical terapy and braces have been described with no predictable efficacy. The purpose of this study was to evaluate prospectively the result of refractory lateral epicondylitis with autologus blood injections.Materials and Methods: Twenty two patients with lateral epicondylitis were injected with 2 mL of autologous blood under the extensor carpi radialis brevis. All patients had failed the two previous non surgical treatments including all or combination of physical therapy, splintinge, non steroidal anti-inflammatory medication and prior steroid injection. The patients were evaluated with patient-rated Tennis Elbow Evaluation (PRTEE.Results: The average fallow-up period was 7.3 months (range, 4-10mo. After autologus blood injection, the average pain score decreased from 43.7 to 9.1 (P-value < 0.001. The average functional score decreased from 42.4 to 10.1 (P-value <0.001.Conclusion: On the basis of this study, this minimally invasive treatment advocates refractory Tennis elbow.

  4. EFFECTIVENESS OF CELLULAR INJECTION MOLDING PROCESS

    Directory of Open Access Journals (Sweden)

    Tomasz Garbacz

    2013-06-01

    Full Text Available In a study of cellular injection, molding process uses polyvinylchloride PVC. Polymers modified with introducing blowing agents into them in the Laboratory of the Department of Technologies and Materiase of Technical University of Kosice. For technological reasons, blowing agents have a form of granules. In the experiment, the content of the blowing agent (0–2,0 % by mass fed into the processed polymer was adopted as a variable factor. In the studies presented in the article, the chemical blowing agents occurring in the granulated form with a diameter of 1.2 to 1.4 mm were used. The view of the technological line for cellular injection molding and injection mold cavity with injection moldings are shown in Figure 1. The results of the determination of selected properties of injection molded parts for various polymeric materials, obtained with different content of blowing agents, are shown in Figures 4-7. Microscopic examination of cross-sectional structure of the moldings were obtained using the author's position image analysis of porous structure. Based on analysis of photographs taken (Figures 7, 8, 9 it was found that the coating containing 1.0% of blowing agents is a clearly visible solid outer layer and uniform distribution of pores and their sizes are similar.

  5. Supported-sorbent injection. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, S. Jr.

    1997-07-01

    A new retrofitable, wastefree acid-rain control concept was pilot-tested at Ohio Edison`s high-sulfur coal-fired R.E. Burger generating station at the 2-MWe level. During the project, moistened {open_quotes}supported{close_quotes} sorbents, made from a combination of lime and vermiculite or perlite, were injected into a humidified 6,500-acfm flue-gas slipstream. After the sorbents reacted with the sulfur dioxide in the flue gas, they were removed from ductwork with a cyclone and baghouse. The $1.0 million project was co-funded by Sorbent Technologies Corporation, the Ohio Edison Company, and the Ohio Coal Development Office. The project included a preliminary bench-scale testing phase, construction of the pilot plant, parametric studies, numerous series of recycle tests, and a long-term run. The project proceeded as anticipated and achieved its expected results. This duct injection technology successfully demonstrated SO{sub 2}-removal rates of 80 to 90% using reasonable stoichiometric injection ratios (2:1 Ca:S) and approach temperatures (20-25F). Under similar conditions, dry injection of hydrated lime alone typically only achieves 40 to 50% SO{sub 2} removal. During the testing, no difficulties were encountered with deposits in the ductwork or with particulate control, which have been problems in tests of other duct-injection schemes.

  6. Low-frequency heroin injection among out-of-treatment, street-recruited injection drug users.

    Science.gov (United States)

    Harris, Jennie L; Lorvick, Jennifer; Wenger, Lynn; Wilkins, Tania; Iguchi, Martin Y; Bourgois, Philippe; Kral, Alex H

    2013-04-01

    In this paper, we explore the understudied phenomenon of "low-frequency" heroin injection in a sample of street-recruited heroin injectors not in drug treatment. We conducted a cross-sectional study of 2,410 active injection drug users (IDUs) recruited in San Francisco, California from 2000 to 2005. We compare the sociodemographic characteristics and injection risk behaviors of low-frequency heroin injectors (low-FHI; one to 10 self-reported heroin injections in the past 30 days) to high-frequency heroin injectors (high-FHI; 30 or more self-reported heroin injections in the past 30 days). Fifteen percent of the sample met criteria for low-FHI. African American race, men who have sex with men (MSM) behavior, and injection and noninjection methamphetamine use were independently associated with low-FHI. Compared to high-FHI, low-FHI were less likely to report syringe sharing and nonfatal heroin overdose. A small but significant proportion of heroin injectors inject heroin 10 or less times per month. Additional research is needed to qualitatively examine low-frequency heroin injection and its relationship to drug use trajectories.

  7. 77 FR 71006 - Sodium Nitrite Injection and Sodium Thiosulfate Injection Drug Products Labeled for the Treatment...

    Science.gov (United States)

    2012-11-28

    ... HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-1134 Sodium Nitrite Injection and Sodium Thiosulfate Injection Drug Products Labeled for the Treatment of Cyanide Poisoning; Enforcement... products containing sodium nitrite labeled for the treatment of cyanide poisoning and unapproved...

  8. Gorenstein flatness and injectivity over Gorenstein rings

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Let R be a Gorenstein ring.We prove that if I is an ideal of R such that R/I is a semi-simple ring,then the Gorenstein flat dimension of R/I as a right R-module and the Gorenstein injective dimension of R/I as a left R-module are identical.In addition,we prove that if R→S is a homomorphism of rings and SE is an injective cogenerator for the category of left S-modules,then the Gorenstein flat dimension of S as a right R-module and the Gorenstein injective dimension of E as a left R-module are identical.We also give some applications of these results.

  9. Injection molded self-cleaning surfaces

    DEFF Research Database (Denmark)

    Søgaard, Emil

    This PhD thesis concerns the development of superhydrophobic surfaces fabricated by injection molding. Today, injection molding is the prevalent production method for consumer plastic products. However, concerns regarding the environmental impact of a plastic production are increasing, especially...... that are superhydrophobic based on topography rather than chemical compounds. Therefore, a novel method for fabricating superhydrophobic polymer surfaces with excellent water-repellant properties is developed. The method is based on microstructure fabrication and superposed nanostructures on silicon wafers. The nano......° for structured surfaces with a drop roll-off angle of less than 2°. Thereby, it is shown that an extremely water repellant surface can be injection molded directly with clear perspectives for more environmental and healthier plastic consumer products....

  10. Ultrafast and Gigantic Spin Injection in Semiconductors

    Science.gov (United States)

    Battiato, M.; Held, K.

    2016-05-01

    The injection of spin currents in semiconductors is one of the big challenges of spintronics. Motivated by the ultrafast demagnetization and spin injection into metals, we propose an alternative femtosecond route based on the laser excitation of superdiffusive spin currents in a ferromagnet such as Ni. Our calculations show that even though only a fraction of the current crosses the Ni-Si interface, the laser-induced creation of strong transient electrical fields at a ferromagnet-semiconductor interface allows for the injection of chargeless spin currents with record spin polarizations of 80%. Beyond that they are pulsed on the time scale of 100 fs which opens the door for new experiments and ultrafast spintronics.

  11. Electrically Injected UV-Visible Nanowire Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Wang, George T.; Li, Changyi; Li, Qiming; Liu, Sheng; Wright, Jeremy Benjamin; Brener, Igal; Luk, Ting -Shan; Chow, Weng W.; Leung, Benjamin; Figiel, Jeffrey J.; Koleske, Daniel D.; Lu, Tzu-Ming

    2015-09-01

    There is strong interest in minimizing the volume of lasers to enable ultracompact, low-power, coherent light sources. Nanowires represent an ideal candidate for such nanolasers as stand-alone optical cavities and gain media, and optically pumped nanowire lasing has been demonstrated in several semiconductor systems. Electrically injected nanowire lasers are needed to realize actual working devices but have been elusive due to limitations of current methods to address the requirement for nanowire device heterostructures with high material quality, controlled doping and geometry, low optical loss, and efficient carrier injection. In this project we proposed to demonstrate electrically injected single nanowire lasers emitting in the important UV to visible wavelengths. Our approach to simultaneously address these challenges is based on high quality III-nitride nanowire device heterostructures with precisely controlled geometries and strong gain and mode confinement to minimize lasing thresholds, enabled by a unique top-down nanowire fabrication technique.

  12. Single gate optimization for plastic injection mold

    Institute of Scientific and Technical Information of China (English)

    LI Ji-quan; LI De-qun; GUO Zhi-ying; LV Hai-yuan

    2007-01-01

    This paper deals with a methodology for single gate location optimization for plastic injection mold. The objective of the gate optimization is to minimize the warpage of injection molded parts, because warpage is a crucial quality issue for most injection molded parts while it is influenced greatly by the gate location. Feature warpage is defined as the ratio of maximum displacement on the feature surface to the projected length of the feature surface to describe part warpage. The optimization is combined with the numerical simulation technology to find the optimal gate location, in which the simulated annealing algorithm is used to search for the optimum. Finally, an example is discussed in the paper and it can be concluded that the proposed method is effective.

  13. Injectable hydrogels as unique biomedical materials.

    Science.gov (United States)

    Yu, Lin; Ding, Jiandong

    2008-08-01

    A concentrated fish soup could be gelled in the winter and re-solled upon heating. In contrast, some synthetic copolymers exhibit an inverse sol-gel transition with spontaneous physical gelation upon heating instead of cooling. If the transition in water takes place below the body temperature and the chemicals are biocompatible and biodegradable, such gelling behavior makes the associated physical gels injectable biomaterials with unique applications in drug delivery and tissue engineering etc. Various therapeutic agents or cells can be entrapped in situ and form a depot merely by a syringe injection of their aqueous solutions at target sites with minimal invasiveness and pain. This tutorial review summarizes and comments on this soft matter, especially thermogelling poly(ethylene glycol)-(biodegradable polyester) block copolymers. The main types of injectable hydrogels are also briefly introduced, including both physical gels and chemical gels.

  14. Energy optimization aspects by injection process technology

    Science.gov (United States)

    Tulbure, A.; Ciortea, M.; Hutanu, C.; Farcas, V.

    2016-08-01

    In the proposed paper, the authors examine the energy aspects related to the injection moulding process technology in the automotive industry. Theoretical considerations have been validated by experimental measurements on the manufacturing process, for two types of injections moulding machines, hydraulic and electric. Practical measurements have been taken with professional equipment separately on each technological operation: lamination, compression, injection and expansion. For results traceability, the following parameters were, whenever possible, maintained: cycle time, product weight and the relative time. The aim of the investigations was to carry out a professional energy audit with accurate losses identification. Base on technological diagram for each production cycle, at the end of this contribution, some measure to reduce the energy consumption were proposed.

  15. Treatment of lipoma by injection lipolysis.

    Science.gov (United States)

    Nanda, Soni

    2011-05-01

    Injection lipolysis or lipodissolve is the practice of injecting phosphatidyl choline/ sodium deoxycholate (PDC/DC) compounds in the subcutaneous fat. Though this practice is being used extensively for nonsurgical contouring of body and dissolving localized collections of excess fat, it's use as a treatment modality for lipomas needs further evaluation. We present a case where this technique was used for treating a lipoma, with no recurrence after 9 months of follow up. Injection lipolysis as a treatment modality for lipomas needs to be evaluated for safety and efficacy in trials on larger population. This could prove to be a very valuable adjunct to the current practice of excision, if done by a trained person in a properly selected patient. Also the side effects and the controversies regarding this procedure have been discussed in detail in the present paper.

  16. Excipients and their use in injectable products.

    Science.gov (United States)

    Nema, S; Washkuhn, R J; Brendel, R J

    1997-01-01

    Formulation of a new drug product with excipients, that have been previously added to an approved injectable product, may save pharmaceutical companies developmental time and cost. The Physicians' Desk Reference (PDR) and Handbook on Injectable Drugs were reviewed, extracting all information on excipients. The information was consolidated into eight tables, categorizing excipients as 1) Solvents and Co-solvents, 2) Solubilizing, Wetting, Suspending, Emulsifying or Thickening agents, 3) Chelating Agents, 4) Antioxidants and Reducing Agents. 5) Antimicrobial Preservatives, 6) Buffers and pH Adjusting Agents, 7) Bulking Agents, Protectants, and Tonicity Adjustors, and 8) Special Additives. Where applicable, tables list frequency of use, concentration, and an example of a commercial product containing the excipient. Excipients which are included in the 1996 FDA 'Inactive Ingredient Guide,' but do not appear in the PDR or Handbook on Injectable Drugs, were included as a separate list.

  17. Demonstration of steady inductive helicity injection

    Science.gov (United States)

    Sieck, P. E.; Jarboe, T. R.; Izzo, V. A.; Hamp, W. T.; Nelson, B. A.; O'Neill, R. G.; Redd, A. J.; Smith, R. J.

    2006-02-01

    Initial results demonstrating the concept of constant inductive helicity injection are presented. Constant helicity injection is achieved using two oscillating inductive helicity injectors, with the goal of producing a bow tie spheromak. Each injector is a 180° segment of a reverse field pinch and they are driven 90° out of phase. Approximately 5 MW of power is injected during the 6 ms pulse, and the input power has been maintained at a fairly constant value by directly fuelling the injectors with neutral gas. Motivation for the experiment is given, including beta-limit calculations for the bow tie spheromak. Fuelling the injectors with neutral gas during the discharge is shown to produce injector parameters that are more constant in time. A series of discharges with increasing power input shows a promising increase in toroidal current. Unique construction techniques of the experiment are also described.

  18. Hydrogeology and results of injection tests at waste-injection test sites in Pinellas County, Florida

    Science.gov (United States)

    Hickey, John J.

    1982-01-01

    Potential benefits or hazards to freshwater resources could result from subsurface injection of treated wastewater. Recognizing this, the U.S. Geological Survey, in cooperation with Pinellas County and the city of St. Petersburg, undertook an evaluation of the hydrogeology and injection of wastewater at proposed test sites on the Pinellas peninsula. The injection sites are underlain by sedimentary rocks ranging in age from Cretaceous to Pleistocene. Lower Eocene carbonate rocks were penetrated to a maximum depth of 3,504 feet and were found to have relatively low water yields. The most permeable part of the investigated section was in rocks of middle Eocene age within the Floridan aquifer. At the injection sites, the Floridan aquifer was subdivided into four permeable zones and three semiconfining beds. The test injection zone is within the Avon Park Limestone, the most productive of the identified permeable zones, with a transmissivity of about 1,000,000 feet squared per day. Two semiconfining beds are above the injection zone in the Suwannee Limestone and Ocala Limestone and have vertical hydraulic conductivities estimated to range from about 0.1 to 1 foot per day where these beds do not contain clay. Limited fresh ground-water supplies exist in the Floridan aquifer within the Pinellas peninsula. At all test sites, chloride concentration in the injection zone ranged from 19,000 to 20,000 milligrams per liter. Injection tests ranging in duration from 3 to 91.1 days were run at three different sites. Pressure buildup occurred in permeable zones above and below the injection zone during these tests. Calculated pressure buildup in observation wells close to and at some distance from the test wells was typically less than 1 pound per square inch. Injection and formation water will probably move slowly through the semiconfining bed overlying the injection zone, and long-term injection tests will be needed to determine the effectiveness of these beds to retard flow. The

  19. Echocardiographic Findings Suggestive of Infective Endocarditis in Asymptomatic Danish Injection Drug Users Attending Urban Injection Facilities

    DEFF Research Database (Denmark)

    Axelsson, Anna; Søholm, Helle; Dalsgaard, Morten

    2014-01-01

    attending a supervised injection facility. We performed transthoracic echocardiographic examinations on-site in the injection facilities. A total of 206 IDUs (mean age 43 ± 9 years, 23% women) with a median injection drug abuse of 18 years (interquartile range 10 to 26) were included. Fourteen IDUs (14......Injection drug users (IDUs) account for a considerable number of the hospitalizations for infective endocarditis (IE), but the prevalence of diagnosed and unrecognized IE in IDUs is unknown. The aim of the present study was to assess the prevalence of valvular abnormalities suggestive of IE in IDUs...... of 206, 7%, 95% confidence interval [CI] 4% to 11%) had a previous history of IE. IDUs with a history of IE were significantly older than IDUs without a history of IE (48 ± 8 vs 42 ± 9 years, respectively, p = 0.03) and had a longer duration of injection drug use (27 [18 to 36] vs 17 years [10 to 25], p...

  20. A cadaveric study on sacroiliac joint injection.

    Science.gov (United States)

    Zou, Yu-Cong; Li, Yi-Kai; Yu, Cheng-Fu; Yang, Xian-Wen; Chen, Run-Qi

    2015-02-01

    The scope of this study was to explore the possibility as well as the feasibility of sacroiliac joint injection following simple X-ray clip location. For the cadaveric study, 10 fixed sacroiliac joint (SIJ) sectional specimens, 4 dried cadaveric pelvises and 21 embalmed adult cadaveric pelvises were dissected, followed by an injection of contrast agent into the joint. The irrigation of the agent was observed through CT scanning. For the radiologic study, 188 CT scans of ankylosing spondylitis patients (143 male, 45 female) were collected from 2010 to 2012, in Nanfang Hospital. What was measured was (1) Distance between the posterior midline and sagittal synovium; (2) Length of the sagittal synovium; (3) Distance between the midpoint of the sagittal synovium and posterior superior iliac spine; and (4) Distance between the superficial skin vertical to the sagittal synovium point were measured. For the practice-based study: 20 patients (17 males and 3 females) with early ankylosing spondylitis, from Nanfang Hospital affiliated with Southern Medical University were recruited, and sacroiliac joint unguided injections were done on the basis of the cadaveric and radiologic study. Only the inferior 1/3(rd) portion parallel to the posterior midline could be injected into since the superior 2/3(rd) portion were filled with interosseous ligaments. Thirteen of the 20 patients received successful injections as identified by CT scan using the contrast agent. Sacroiliac joint injection following simple X-ray clip location is possible and feasible if the operation is performed by trained physicians familiar with the sacroiliac joint and its surrounding anatomic structures.

  1. Analysis of rocket engine injection combustion processes

    Science.gov (United States)

    Salmon, J. W.

    1976-01-01

    A critique is given of the JANNAF sub-critical propellant injection/combustion process analysis computer models and application of the models to correlation of well documented hot fire engine data bases. These programs are the distributed energy release (DER) model for conventional liquid propellants injectors and the coaxial injection combustion model (CICM) for gaseous annulus/liquid core coaxial injectors. The critique identifies model inconsistencies while the computer analyses provide quantitative data on predictive accuracy. The program is comprised of three tasks: (1) computer program review and operations; (2) analysis and data correlations; and (3) documentation.

  2. On Injective Embeddings of Tree Patterns

    CERN Document Server

    Michaliszyn, Jakub; Staworko, Sławek; Wieczorek, Piotr; Wu, Zhilin

    2012-01-01

    We study three different kinds of embeddings of tree patterns: weakly-injective, ancestor-preserving, and lca-preserving. While each of them is often referred to as injective embedding, they form a proper hierarchy and their computational properties vary (from P to NP-complete). We present a thorough study of the complexity of the model checking problem i.e., is there an embedding of a given tree pattern in a given tree, and we investigate the impact of various restrictions imposed on the tree pattern: bound on the degree of a node, bound on the height, and type of allowed labels and edges.

  3. Current Injection Pumping of Organic Light Emitters

    Science.gov (United States)

    1989-09-28

    MOT-OOO1AF I Current Injection Pumping of Organic Light Emitters Prepared by DI Jeffrey C. Buchholz E L ri: 8 James P. Stec OCT C "t989 Mary C...Schutte Micro -Optics Technologies, Inc. 8608 University Green #5 Middleton, WI 53562 28 September 1989 D,:?UqflON SA2". N’.’ _ Disuibunon Uanu-ted Contract...Title Report Date Current Injection Pumping of Organic Light Emitters 28 September 1989 Authors Jeffrey C. Buchholz, James P. Stec, Mary C. Schutte

  4. Tissue necrosis following intramuscular diclofenac injection

    Directory of Open Access Journals (Sweden)

    Feyzi Çelik

    2010-09-01

    Full Text Available Following intramuscular drug injections, livedoid dermati-tis (also known as embolia cutis medicamentosa or NicolauSyndrome, characterized by pain, skin discoloration,and cutaneous necrosis, may rarely be observed. In thepresent study, we present a 32-year-old male patient whodeveloped Nicolau Syndrome after intramuscular injec-tion of single-dose diclofenac sodium 75 mg due to renalcolic pain. The physical examination revealed skin discol-oration in his left gluteal region, and a skin necrosis. Caseis very interesting because of rarely.

  5. Fluidized-Solid-Fuel Injection Process

    Science.gov (United States)

    Taylor, William

    1992-01-01

    Report proposes development of rocket engines burning small grains of solid fuel entrained in gas streams. Main technical discussion in report divided into three parts: established fluidization technology; variety of rockets and rocket engines used by nations around the world; and rocket-engine equation. Discusses significance of specific impulse and ratio between initial and final masses of rocket. Concludes by stating three important reasons to proceed with new development: proposed engines safer; fluidized-solid-fuel injection process increases variety of solid-fuel formulations used; and development of fluidized-solid-fuel injection process provides base of engineering knowledge.

  6. Cavity Pressure Behaviour in Micro Injection Moulding

    DEFF Research Database (Denmark)

    Griffiths, C.A.; Dimov, S.S.; Scholz, S.

    2010-01-01

    Process monitoring of micro injection moulding (µIM) is of crusial importance to analyse the effect of different parameter settings on the process and to assess its quality. Quality factors related to cavity pressure can provide useful information directly connected with the dyanmics of the process...... has been investigated by moulding a micro fluidic component on three different polymers (PP, ABS, PC) using the design of experiment approach. Similar trends such as the effects of a higher injection speed in decreasing the pressure work and of a lower temperature in decreasing pressure rate have been...

  7. Powder injection molding of pure titanium

    Institute of Scientific and Technical Information of China (English)

    GUO Shibo; DUAN Bohua; HE Xinbo; QU Xuanhui

    2009-01-01

    An improved wax-based binder was developed for powder injection molding of pure titanium. A critical powder loading of 69 vol.% and a pseudo-plastic flow behavior were obtained by the feedstock based on the binder. The injection molding, debinding, and sintering process were studied. An ideal control of carbon and oxygen contents was achieved by thermal debinding in vacuum atmosphere (10-3 Pa). The mechanical properties of as-sintered specimens were less than those of titanium made by the conventional press-sintering process. Good shape retention and ±0.04 mm dimension deviation were achieved.

  8. Parametric injection for monoenergetic electron acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Oguchi, A; Takano, K; Hotta, E; Nemoto, K [Department of Energy Sciences Tokyo Institute of Technology 4259 Nagatsuta-cho Midori-ku Yokohama 226-8502 Japan (Japan); Zhidkov, A [Central Research Instistute of Electric Power Industry 2-6-1 Nagasaka Yokosuka Kanagawa 240-0196 Japan (Japan); Nakajima, K [High Energy Accelerator Research Organization, KEK 1-1 Oho Tsukuba Ibaraki 305-0801 Japan (Japan)], E-mail: blue-ayu@plasma.es.titech.ac.jp

    2008-05-01

    Electrons are accelerated in the laser wakefield (LWFA). This mechanism has been studied by 2D or 3D Particle In Cell simulation. However, how the electrons are injected in the wakefield is not understood. In this paper, we consider about the process of self -injection and propose new scheme. When plasma electron density modulates, parametric resonance of electron momentum is induced. The parametric resonance depends on laser waist modulation. We carried out 2D PIC simulation with the initial condition decided from resonance condition. Moreover, we analyze experimental result that generated 200-250 MeV monoenergetic electron beam with 400TW intense laser in CAEP in China.

  9. Textual Manipulation for SQL Injection Attacks

    Directory of Open Access Journals (Sweden)

    Hussein AlNabulsi

    2013-11-01

    Full Text Available SQL injection attacks try to use string or text manipulations to access illegally websites and their databases. This is since using some symbols or characters in SQL statements may trick the authentication system to incorrectly allow such SQL statements to be processed or executed. In this paper, we highlighted several examples of such text manipulations that can be successfully used in SQL injection attacks. We evaluated the usage of those strings on several websites and web pages using SNORT open source. We also conducted an extensive comparison study of some relevant papers.

  10. TECHNOLOGICAL WASTE DISPOSAL BY SUBSURFACE INJECTION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Janković Branimir

    2002-12-01

    Full Text Available The application of oilfield and solution mining technology to subsurface disposal of technological wastes has proven to be an environmentally, technically and economically suitable method for the disposal of the waste generated in petroleum industry as well as other industrial branches. This paper describes the subsurface injection technology, the disposal formation characteristics, the waste disposal well design, evaluates the environmental impact of above mentioned technology and proposes a solutions for disposing of technological wastes in Croatia or nerby region by implementing underground injection technology according to the world experience (the paper is published in Croatian.

  11. Effect of Doll Injection Display on Pain Intensity due to Intramuscular Injection in Preschool Children

    Directory of Open Access Journals (Sweden)

    H. Irani

    2016-09-01

    Full Text Available Aims: Pains caused by the invasive actions such as intramuscular injection lead to the physical and mental tensions in the children. Therefore, such pains should be given relief. One of the main priorities in the nursing is to notice methods that reduce pains due to the invasive actions in the children. The aim of this study was to investigate the effects of injection displayed on a doll on the pain intensity due to the intramuscular injection in the preschool children. Materials & Methods: In the randomized controlled clinical trial, 62 kids aged between 4 and 6 years with pharyngitis were studied in the clinic of the health network of Khalil-abad Township in 2015. The intramuscular injection of penicillin 6.3.3 was administrated for the kids. The subjects, selected by simple lottery, were divided into two groups including experimental and control groups (n=31 per group. Data was collected using a demographic characteristic collecting form and Oucher standard pain assessment tool. In experimental group, the kid watching, one intramuscular injection was displayed on a doll by a nurse; then, the kid underwent an intramuscular injection. In control group, the routine injection method was done. Data was analyzed by SPSS 19 software using Mann-Whitney, independent T, and Chi-square tests. Findings: Mean pain intensity after injection in experimental group (3.22±0.90 was significantly lower than control group (4.19±0.83; p<0.001. Conclusion: The injection displayed on a doll before the intramuscular injection might lead to pain reduction in the preschool kids.

  12. Health and safety risks associated with public injecting among people who inject drugs in Bangkok, Thailand.

    Science.gov (United States)

    Leung, Leslie Tze Fung; Ti, Lianping; Hayashi, Kanna; Suwannawong, Paisan; Kaplan, Karyn; Wood, Evan; Kerr, Thomas

    2013-11-01

    The injection of illicit drugs in public spaces is known to pose significant health risks to people who inject drugs (IDU). However, to our knowledge this practice has not been explored in the Asian context. Therefore, we sought to characterise the prevalence of and factors associated with public injecting among a community-recruited sample of IDU in Bangkok, Thailand. Data were derived from the Mitsampan Community Research Project between July and October 2011. Using multivariate logistic regression, this cross-sectional study examined the prevalence and correlates of public injecting within the past six months among 437 IDU participants. In total, 121 (27.7%) participants reported injecting drugs in a public space within the past six months. In multivariate analyses, public drug injection was independently associated with male gender [adjusted odds ratio (AOR) 2.51, 95% confidence interval (CI)) 1.29-5.22], weekly heroin injection (AOR 2.19, 95% CI 1.27-3.77), assisted injection (AOR 1.93, 95% CI 1.06-3.49), rushed injection (AOR 4.36, 95% CI 2.65-7.24), incarceration (AOR 2.27, 95% CI 1.01-5.04) and noticing police presence where drugs are bought or used (AOR 1.83, 95% CI 1.06-3.19). A substantial proportion of Thai IDU in our sample reported recent public drug injection. This behaviour was independently associated with a wide range of individual and contextual factors that pose significant health and safety risks to the IDU. These findings highlight the importance of addressing the broader social and physical risk environment surrounding IDU as a means of preventing negative health outcomes among this population. © 2013 Australasian Professional Society on Alcohol and other Drugs.

  13. The Third Injection Technique Workshop In Athens (TITAN)

    NARCIS (Netherlands)

    Frid, A.; Hirsch, L.; Gaspar, R.; Hicks, D.; Kreugel, G.; Liersch, J.; Letondeur, C.; Sauvanet, J. P.; Tubiana-Rufi, N.; Strauss, K.

    The first Injection Technique workshop brought together endocrinologists and injection experts from around the world in Strasbourg in 1997. From its work came groundbreaking recommendations which advanced best practices in areas such as the use of a skin fold when injecting. The second Injection

  14. Comparative Effectiveness of Injection Therapies in Lateral Epicondylitis

    DEFF Research Database (Denmark)

    Krogh, Thøger Persson; Bartels, Else Marie; Ellingsen, Torkell

    2012-01-01

    Injection therapy with glucocorticoids has been used since the 1950s as a treatment strategy for lateral epicondylitis (tennis elbow). Lately, several novel injection therapies have become available.......Injection therapy with glucocorticoids has been used since the 1950s as a treatment strategy for lateral epicondylitis (tennis elbow). Lately, several novel injection therapies have become available....

  15. The Third Injection Technique Workshop In Athens (TITAN)

    NARCIS (Netherlands)

    Frid, A.; Hirsch, L.; Gaspar, R.; Hicks, D.; Kreugel, G.; Liersch, J.; Letondeur, C.; Sauvanet, J. P.; Tubiana-Rufi, N.; Strauss, K.

    2010-01-01

    The first Injection Technique workshop brought together endocrinologists and injection experts from around the world in Strasbourg in 1997. From its work came groundbreaking recommendations which advanced best practices in areas such as the use of a skin fold when injecting. The second Injection Tec

  16. Process and part filling control in micro injection molding

    DEFF Research Database (Denmark)

    Tosello, Guido; Hansen, Hans Nørgaard; Schoth, Andreas

    2008-01-01

    The influence of process parameters on μ-injection molding (μIM) and on μ-injection molded parts has been investigated using Design of Experiments. A mold with a sensor applied at injection location was used to monitor actual injection pressure and to determine the cavity filling time. Flow markers...

  17. Injection System design for a hadron therapy Synchrotron

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jin-Quan; SONG Ming-Tao; WEI Bao-Wen

    2008-01-01

    A synchrotron is designed for tumour therapy with C6+ ions or proton.Its injector is a cyclotron, which delivers C5+or H+2 ions to the synchrotron.After comparing the methods of the single-turn injection, the multi-turn injection and the stripping injection,this paper chooses the stripping injection method.In addition,the concept design of the injection system is presented,in which the synchrotron lattice is optimized.

  18. Plasma Injection Schemes for Laser-Plasma Accelerators

    OpenAIRE

    J. Faure

    2017-01-01

    Plasma injection schemes are crucial for producing high-quality electron beams in laser-plasma accelerators. This article introduces the general concepts of plasma injection. First, a Hamiltonian model for particle trapping and acceleration in plasma waves is introduced; ionization injection and colliding-pulse injection are described in the framework of this Hamiltonian model. We then proceed to consider injection in plasma density gradients.

  19. Subcutaneous injection technique: an evidence-based approach.

    Science.gov (United States)

    Ogston-Tuck, Sherri

    2014-09-23

    Injections are routinely administered by nurses in acute care settings and in the community. Nurses require a thorough understanding of anatomy and physiology, pharmacological principles and equipment, and potential risks to the patient of injections. Nurses should also take an active approach to patient assessment before injecting medicines. This article, the first of two, provides an evidence-based review of injection administration, with particular reference to subcutaneous injections, and suggests a framework for best practice.

  20. Seism Analysis of Security Injection Tank

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The purpose of the seism analysis of the security injection tank is to make sure whether the tank can resist the concerned dynamic loads or not on all the conditions according to the concerned prescripts of the code and the design requirements.

  1. Thermal Stress Analysis of Security Injection Tank

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The purpose of the thermal stress analysis of the security injection tank is to make sure whether the tank can withstand the concerned thermal load or not on all the conditions conforming to the concerned code prescripts and the design requirements.

  2. Adverse skin reactions following intravitreal bevacizumab injection

    Science.gov (United States)

    Ameen, S; Entabi, M; Lee, N; Stavrakoglou, A

    2011-01-01

    The authors describe two separate cases of skin eruption following intravitreal bevacizumab injection with evidence to suggest that these were adverse drug reactions to bevacizumab. The authors also discuss how each case was treated and report on the final outcome. PMID:22715260

  3. The mechanical impact of CO2 injection

    NARCIS (Netherlands)

    Orlic, B.; Schroot, B.

    2005-01-01

    The mechanical impact of CO2 injection into a depleted hydrocarbon field or aquifer is caused by changes in the stress field, resulting from changes in the pore pressure and volume of the rock. Mechanical processes can lead to the loss of reservoir and caprock integrity, and the reactivation of exis

  4. Silting mutation for self-injective algebras

    CERN Document Server

    Aihara, Takuma

    2010-01-01

    We study `silting mutaion' for self-injective algebras. In particular we focus on `tilting mutation' and show that iterated irreducible `silting mutation' transitively act on the set of silting objects for representation-finite symmetric algebras. Moreover we give some sufficient conditions for `Bongartz-type Lemma' on silting objects.

  5. Adverse reactions to injectable soft tissue fillers

    DEFF Research Database (Denmark)

    Requena, Luis; Requena, Celia; Christensen, Lise

    2011-01-01

    In recent years, injections with filler agents are often used for wrinkle-treatment and soft tissue augmentation by dermatologists and plastic surgeons. Unfortunately, the ideal filler has not yet been discovered and all of them may induce adverse reactions. Quickly biodegradable or resorbable...

  6. Surface micro topography replication in injection moulding

    DEFF Research Database (Denmark)

    Arlø, Uffe Rolf

    of the mechanisms controlling topography replication. Surface micro topography replication in injection moulding depends on the main elements of  Process conditions  Plastic material  Mould topography In this work, the process conditions is the main factor considered, but the impact of plastic material...

  7. Surface Micro Topography Replication in Injection Moulding

    DEFF Research Database (Denmark)

    Arlø, Uffe Rolf; Hansen, Hans Nørgaard; Kjær, Erik Michael

    2005-01-01

    The surface micro topography of injection moulded plastic parts can be important for aesthetical and technical reasons. The quality of replication of mould surface topography onto the plastic surface depends among other factors on the process conditions. A study of this relationship has been...

  8. Magnetic Helicity Injection in Solar Active Regions

    Institute of Scientific and Technical Information of China (English)

    Hong-Qi Zhang

    2006-01-01

    We present the evolution of magnetic field and its relationship with magnetic (current) helicity in solar active regions from a series of photospheric vector magnetograms obtained by Huairou Solar Observing Station, longitudinal magnetograms by MDI of SOHO and white light images of TRACE. The photospheric current helicity density is a quantity reflecting the local twisted magnetic field and is related to the remaining magnetic helicity in the photosphere, even if the mean current helicity density brings the general chiral property in a layer of solar active regions. As new magnetic flux emerges in active regions, changes of photospheric current helicity density with the injection of magnetic helicity into the corona from the subatmosphere can be detected, including changes in sign caused by the injection of magnetic helicity of opposite sign. Because the injection rate of magnetic helicity and photospheric current helicity density have different means in the solar atmosphere,the injected magnetic helicity is probably not proportional to the current helicity density remaining in the photosphere. The evidence is that rotation of sunspots does not synchronize exactly with the twist of photospheric transverse magnetic field in some active regions (such as, delta active regions). They represent different aspects of magnetic chirality. A combined analysis of the observational magnetic helicity parameters actually provides a relative complete picture of magnetic helicity and its transfer in the solar atmosphere.

  9. Demoulding force in micro-injection moulding

    DEFF Research Database (Denmark)

    Griffiths, C.A.; Dimov, S.S.; Scholz, S.

    2012-01-01

    The paper reports an experimental study that investigates part demoulding behavior in micro injection moulding (MIM) with a focus on the effects of pressure (P) and temperature (T) on the demoulding forces. Demoulding of a microfluidics part is conducted and the four processing parameters of melt...

  10. 21 CFR 522.1182 - Iron injection.

    Science.gov (United States)

    2010-04-01

    ... equivalent of: (1) 100 milligrams (mg) of elemental iron derived from: (i) Ferric hydroxide; (ii) Ferric oxide; or (iii) Elemental iron. (2) 200 mg of elemental iron derived from ferric hydroxide. (b) Sponsors... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Iron injection. 522.1182 Section 522.1182 Food...

  11. Nanostructuring steel for injection molding tools

    DEFF Research Database (Denmark)

    Al-Azawi, A.; Smistrup, Kristian; Kristensen, Anders

    2014-01-01

    and ion beam etching are combined to nanostructure the planar surface of a steel wafer. Injection molded plastic parts with enhanced surface properties, like anti-reflective, superhydrophobic and structural colors can be achieved by micro-and nanostructuring the surface of the steel molds. We investigate...

  12. [Puntino and the injections of Popeye].

    Science.gov (United States)

    Bevilacqua, C; Giuntoli, A; Scannella, D; Seguini, M; Bagna, R; Fabris, C

    2000-01-01

    Subcutaneous injection of active principles must be performed through a short and thin needle and an insuline syringe (because of the few quantity of drug to administrate). In our Centre, to prevent preterm chronic anemia wc practice subcutaneous therapy with recombinant human erythropoietin. 300 UI three times a week, to all the newborns weighing < 1500 g at birth. Injections to the newborns are performed in correspondence of their gluteal and deltoid muscles, and in the outer part of their thigh. To prevent atrophy, it is important to change every time the site of Injection. For this goal, we have created the shape of a newborn, nained Puntino, and we have located 24 points on it. Each point has received a number between 0 and 23. During the treatment we have followed the guide of Puntino to locate each time the correct site of injection. Thanks to Puntino's aid, there were no cases of skin adverse reaction and atrophy, even in newborns weighing < 1000 g.

  13. Intraurethral Injection of Autologous Minced Skeletal Muscle

    DEFF Research Database (Denmark)

    Gräs, Søren; Klarskov, Niels; Lose, Gunnar

    2014-01-01

    noted. CONCLUSIONS: Intraurethral injection of minced autologous muscle tissue is a simple surgical procedure that appears safe and moderately effective in women with uncomplicated stress urinary incontinence. It compares well to a more complicated regenerative strategy using in vitro expanded muscle...

  14. Mould filling simulations during powder injection moulding

    NARCIS (Netherlands)

    Bilovol, V.V.

    2003-01-01

    Powder injection moulding (PIM) is a versatile technology capable of producing complex and near net shape parts. Significant help in optimisation of the PIM process can be obtained from the numerical simulation. To obtain realistic numerical results it is necessary to fulfil certain conditions. The

  15. Planning an Injection Mold Design Training Program.

    Science.gov (United States)

    Allyn, Edward P.

    With the increased use of plastics worldwide the shortage of trained personnel in moldmaking and design for plastic injection molds is becoming critical. Local schools and community colleges should provide courses in mold design and mold making, since most workers presently learn while working under experienced designers on the job. Following this…

  16. Flow Injection will be 25 years

    DEFF Research Database (Denmark)

    Hansen, Elo Harald

    1999-01-01

    The article is a brief review of the first 25 years of Flow Injection Analysis (FIA), that is, from its conception and early development in the mid-70'es at the Department of Chemistry at DTU, yet it is particularly discussing why this analytical concept has had the impact that the ensuing 10...

  17. Stress Assessment of Security Injection Tank

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The purpose of the calculating is to make the stress assessment of the security injection tank according to the requirements of the code and the designing on the basis of the gained results of the static, the seism and the thermal stress in order to judge

  18. Lake destratification induced by local air injection

    NARCIS (Netherlands)

    Kranenburg, C.

    1979-01-01

    Mathematical and physical modelling makes possible quantitative predictions regarding the destratification process brought about by the local injection of air at the bottom of a thermally stratified lake or reservoir. The mathematical model developed distinguishes between a near field and a far fiel

  19. Magnetic-texture-controlled transverse spin injection

    NARCIS (Netherlands)

    van der Bijl, E.; Troncoso, R.E.; Duine, R.A.

    2013-01-01

    We propose an effect whereby an electric current along the interface between a ferromagnetic and normalmetal leads to injection of pure spin current into the normal metal, if the magnetization direction in the ferromagnet varies spatially along the direction of current. For the specific example of a

  20. Optimizing reversible simulation of injective functions

    DEFF Research Database (Denmark)

    Yokoyama, Tetsuo; Axelsen, Holger Bock; Glück, Robert

    2012-01-01

    of the computation and uncomputation steps for a class of injective programs. A practical consequence is that the reversible simulation runs twice as fast as Bennett’s simulation. The proposed method is demonstrated by developing lossless encoders and decoders for run-length encoding and range coding. The range...

  1. Self-injection is a success

    DEFF Research Database (Denmark)

    Jensen, Jonna Gintberg; Høi, Henriette Brahe

    Background: 29 of the 120 patients with Acromegaly, which annually comes to control at Aarhus University Hospital, are in lifelong Ipstyl treatment. Ipstyl, which is a viscous composition, is injected with a rather large needle. This requires both mental energy, skill and muscle power. Therefore...

  2. Self injection of Dichlorvos, an Organophosphorus Compound

    Directory of Open Access Journals (Sweden)

    Sujeet Raina

    2008-07-01

    Full Text Available We report two patients who injected themselves a strong organophosphate compound, dichlorvas, and showed the typical clinical picture of organophosphate intoxication. There are very few case reports of parenteral organophosphorous poisoning. With the appropriate therapy, their symptoms disappeared in a few days. The cases are reported because of unusual and interesting way of intoxication.

  3. Tre generationer af Flow Injection Analysis

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Chomchoei, Roongrat; Long, Xiangbao

    2004-01-01

    Siden introduktionen af FIA har en række videreudviklinger resulteret i Sequential Injection Analysis (SIA) og senest i Lab-on-Valve (LOV)-metodikken. Her beskrives disse, og der gives eksempler på, hvordan metoderne kan bruges til at bestemme sporstofkoncentrationer af metaller i komplekse...

  4. Selforthogonal modules with finite injective dimension

    Institute of Scientific and Technical Information of China (English)

    黄兆泳

    2000-01-01

    The category consisting of finitely generated modules which are left orthogonal with a cotilting bimodule is shown to be functorially finite. The notion of left orthogonal dimension is introduced , and then a necessary and sufficient condition of selforthogonal modules having finite injective dimension and a characterization of cotilting modules are given.

  5. Selforthogonal modules with finite injective dimension

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The category consisting of finitely generated modules which are left orthogonal with a cotilting bimodule is shown to be functorially finite. The notion of left orthogonal dimension is introduced, and then a necessary and sufficient condition of selforthogonal modules having finite injective dimension and a characterization of cotilting modules are given.

  6. Postoperative systemic dissemination of injected elemental mercury.

    Science.gov (United States)

    Kang, Suk-Hyung; Park, Seung Won; Moon, Kyung-Yoon

    2011-04-01

    There were only a few reports of mercury on pulmonary artery. However, there is no data on surgery related mercury dissemination. The objective of the present article is to describe one case of postoperative injected mercury dissemination. A 19-year-old man presented severe neck pain including meningeal irritation sign and abdominal pain after injection of mercury for the purpose of suicide. Radiologic study showed injected mercury in the neck involving high cervical epidural space and subcutaneous layer of abdomen. Partial hemilaminectomy and open mercury evacuation of spinal canal was performed. For the removal of abdominal subcutaneous mercury, C-arm guided needle aspiration was done. After surgery, radiologic study showed disseminated mercury in the lung, heart, skull base and low spinal canal. Neck pain and abdominal pain were improved after surgery. During 1 month after surgery, there was no symptom of mercury intoxication except increased mercury concentration of urine, blood and hair. We assumed the bone work during surgery might have caused mercury dissemination. Therefore, we recommend minimal invasive surgical technique for removal of injected mercury. If open exposures are needed, cautious surgical technique to prohibit mercury dissemination is necessary and normal barrier should be protected to prevent the migration of mercury.

  7. Immunity of FPGA chips by direct injection

    OpenAIRE

    Aurand, Tobias; Dawson, J.F.; Robinson, Martin Paul; Marvin, A.C.

    2009-01-01

    Immunity measurements of Xilinix XC3S200TQ144 and Altera EP3C10E144C7N FPGAs by direct injection are presented and the immunity of individual pins is shown to depend greatly on the load seen by nearby pins. The implications of this on in circuit immunity prediction are discussed.

  8. Flow Injection Analysis in Industrial Biotechnology

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Miró, Manuel

    2009-01-01

    Flow injection analysis (FIA) is an analytical chemical continuous-flow (CF) method which in contrast to traditional CF-procedures does not rely on complete physical mixing (homogenisation) of the sample and the reagent(s) or on attaining chemical equilibria of the chemical reactions involved. Ex...

  9. Progress in Titanium Metal Powder Injection Molding

    Directory of Open Access Journals (Sweden)

    Randall M. German

    2013-08-01

    Full Text Available Metal powder injection molding is a shaping technology that has achieved solid scientific underpinnings. It is from this science base that recent progress has occurred in titanium powder injection molding. Much of the progress awaited development of the required particles with specific characteristics of particle size, particle shape, and purity. The production of titanium components by injection molding is stabilized by a good understanding of how each process variable impacts density and impurity level. As summarized here, recent research has isolated the four critical success factors in titanium metal powder injection molding (Ti-MIM that must be simultaneously satisfied—density, purity, alloying, and microstructure. The critical role of density and impurities, and the inability to remove impurities with sintering, compels attention to starting Ti-MIM with high quality alloy powders. This article addresses the four critical success factors to rationalize Ti-MIM processing conditions to the requirements for demanding applications in aerospace and medical fields. Based on extensive research, a baseline process is identified and reported here with attention to linking mechanical properties to the four critical success factors.

  10. Corticosteroid injection for de Quervain's tenosynovitis

    NARCIS (Netherlands)

    Peters-Veluthamaningal, Cyriac; van der Windt, Danielle A. W. M.; Winters, Jan C.; Jong, Betty Meyboom-de

    2009-01-01

    Back ground De Quervain's tenosynovitis is a disorder characterised by pain on the radial (thumb) side of the wrist and functional disability of the hand. It can be treated by corticosteroid injection, splinting and surgery. Objectives To summarise evidence on the efficacy and safety of corticostero

  11. Cavity Pressure Behaviour in Micro Injection Moulding

    DEFF Research Database (Denmark)

    Griffiths, C.A.; Dimov, S.S.; Scholz, S.;

    2010-01-01

    has been investigated by moulding a micro fluidic component on three different polymers (PP, ABS, PC) using the design of experiment approach. Similar trends such as the effects of a higher injection speed in decreasing the pressure work and of a lower temperature in decreasing pressure rate have been...

  12. Anchor Stress Checking of Security Injection Tank

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The intention of the calculating is to check the anchor stresses of the security injection tank to know whether the stress is satisfied the code requirements on the basis of all the reaction forces gained in the static, seismic and thermal stress results.

  13. PET radioligand injection for pig neuroimaging

    DEFF Research Database (Denmark)

    Alstrup, Aage Kristian Olsen; Munk, Ole Lajord; Landau, Anne M.

    2017-01-01

    Pigs are useful models in neuroimaging studies with positron emission tomography. Radiolabeled ligands are injected intravenously at the start of the scan and in pigs, the most easily accessible route of administration is the ear vein. However, in brain studies the short distance between the brai...

  14. Corticosteroid injection for de Quervain's tenosynovitis

    NARCIS (Netherlands)

    Peters-Veluthamaningal, Cyriac; van der Windt, Danielle A. W. M.; Winters, Jan C.; Jong, Betty Meyboom-de

    2009-01-01

    Back ground De Quervain's tenosynovitis is a disorder characterised by pain on the radial (thumb) side of the wrist and functional disability of the hand. It can be treated by corticosteroid injection, splinting and surgery. Objectives To summarise evidence on the efficacy and safety of

  15. Corticosteroid injection for trigger finger in adults

    NARCIS (Netherlands)

    Peters-Veluthamaningal, Cyriac; van der Windt, Danielle A. W. M.; Winters, Jan C.; Meyboom-de Jong, Betty

    2009-01-01

    Background Trigger finger is a disease of the tendons of the hand leading to triggering (locking) of affected fingers, dysfunction and pain. Available treatments include local injection with corticosteroids, surgery, or splinting. Objectives To summarize the evidence on the efficacy and safety of

  16. EFFECTS OF INJECTION TEMPERATURE ON MECHANICAL PROPERTIES OF BAGASSE/POLYPROPYLENE INJECTION MOLDING COMPOSITES

    Directory of Open Access Journals (Sweden)

    Shinichi Shibata

    2010-08-01

    Full Text Available Effects of injection temperature on thermal degradation and porosity of the bagasse/polypropylene injection molding composites were studied. Above 185 ºC, incomplete filling occurred. The incomplete filling increased with increase of injection temperature. It was found that the gas generated by thermal degradation of bagasse fibers was so accumulated in the injection cylinder that the injected composites ended up with incomplete filling. A modified injection method with the venting of gas increased the complete filling percentage. Mechanical properties decreased with increase of injection temperature from 165 ºC to 260 ºC. This was due to increase of porosity and fiber shortening. The calculated flexural modulus, which incorporated the effect of porosity and fiber length, agreed well with the experimental results. Composites with maleic acid anhydride grafted polypropylene (MAPP were also investigated. Flexural strength and impact strength were improved by 45% and 35%, respectively, by addition of 20wt% MAPP. In the MAPP composites, fiber breakages at their roots were observed in the fracture surface after an impact test, while pulled-off fibers were observed in those without MAPP.

  17. Generalizations of principally quasi-injective modules and quasiprincipally injective modules

    Directory of Open Access Journals (Sweden)

    Zhu Zhanmin

    2005-08-01

    Full Text Available Let R be a ring and M a right R-module with S=End(MR. The module M is called almost principally quasi-injective (or APQ-injective for short if, for any m∈M, there exists an S-submodule Xm of M such that lMrR(m=Sm⊕Xm. The module M is called almost quasiprincipally injective (or AQP-injective for short if, for any s∈S, there exists a left ideal Xs of S such that lS(Ker(s=Ss⊕Xs. In this paper, we give some characterizations and properties of the two classes of modules. Some results on principally quasi-injective modules and quasiprincipally injective modules are extended to these modules, respectively. Specially in the case RR, we obtain some results on AP-injective rings as corollaries.

  18. UV-visible digital imaging of split injection in a Gasoline Direct Injection engine

    Directory of Open Access Journals (Sweden)

    Merola Simona Silvia

    2015-01-01

    Full Text Available Ever tighter limits on pollutant emissions and the need to improve energy conversion efficiency have made the application of gasoline direct injection (GDI feasible for a much wider scale of spark ignition engines. Changing the way fuel is delivered to the engine has thus provided increased flexibility but also challenges, such as higher particulate emissions. Therefore, alternative injection control strategies need to be investigated in order to obtain optimum performance and reduced environmental impact. In this study, experiments were carried out on a single-cylinder GDI optical engine fuelled with commercial gasoline in lean-burn conditions. The single-cylinder was equipped with the head of a commercial turbocharged engine with similar geometrical specifications (bore, stroke, compression ratio and wall guided fuel injection. Optical accessibility was ensured through a conventional elongated hollow Bowditch piston and an optical crown, accommodating a fused-silica window. Experimental tests were performed at fixed engine speed and injection pressure, whereas the injection timing and the number of injections were adjusted to investigate their influence on combustion and emissions. UV-visible digital imaging was applied in order to follow the combustion process, from ignition to the late combustion phase. All the optical data were correlated with thermodynamic analysis and measurements of exhaust emissions. Split injection strategies (i.e. two injections per cycle with respect to single injection increased combustion efficiency and stability thanks to an improvement of fuel air mixing. As a consequence, significant reduction in soot formation and exhaust emission with acceptable penalty in terms of HC and NOx were measured.

  19. Injection-site lesions in carcasses of cattle receiving injections at branding and at weaning.

    Science.gov (United States)

    George, M H; Heinrich, P E; Dexter, D R; Morgan, J B; Odde, K G; Glock, R D; Tatum, J D; Cowman, G L; Smith, G C

    1995-11-01

    Crossbred steer and heifer calves (n = 84) were given injections at branding and at weaning (using a completely randomized block design); 225 to 376 d later, pairs of two subprimal cuts from each animal were evaluated for incidence and severity of injection-site lesions. The four products compared were 1) a 2-mL clostridial, 2) a 5-mL clostridial, 3) vitamin AD3, and 4) a long-acting oxytetracycline antibiotic (OTC). Branding-age calves (mean 48.3 d of age) received intramuscular injections of two of the four products, in the semimembranosus (inside round) muscles (one in the left muscle and one in the right); at weaning age (mean 199.3 d of age), calves received injections of the remaining two products in the gluteus medius (top sirloin butt) muscles (one in the left and the other in the right). Injections at branding of 2 mL of clostridial, 5 mL of clostridial, vitamin AD3, and OTC caused injection-site lesions in 72.5, 92.7, 5.3, and 51.2%, respectively, of inside rounds from slaughter cattle. Incidence of injection-site lesions was lowest (P branding and weaning times) and was highest (P branding or of OTC at weaning. Less trimming was required to remove the lesions resulting from injections of all four products when they were given at weaning time. Before completion of the present study, it was thought that injection-site lesions were from damage that subsisted only briefly following an inoculation; these results make it abundantly clear that intramuscular administration of clostridials and certain antibiotics will cause damage so severe that it will be evident in beef muscle 7.5 to 12 mo later.

  20. Individual and socio-environmental factors associated with unsafe injection practices among young adult injection drug users in San Diego

    Science.gov (United States)

    Muñoz, Fátima; Burgos, José Luis; Cuevas-Mota, Jazmine; Teshale, Eyasu; Garfein, Richard S.

    2014-01-01

    Unsafe injection practices significantly increase the risk of hepatitis C virus and human immunodeficiency virus (HIV) infection among injection drug users (IDUs). We examined individual and socio-environmental factors associated with unsafe injection practices in young adult IDUs in San Diego, California. Of 494 IDUs, 46.9% reported receptive syringe sharing and 68.8% sharing drug preparation paraphernalia in the last 3 months. Unsafe injection practices were associated with increased odds of having friends who injected drugs with used syringes, injecting with friends, sexual partners, and injecting heroin. Perceived high susceptibility to HIV and perceived barriers to obtaining sterile syringes were associated with increased odds of receptive syringe sharing, but not with sharing injection paraphernalia. Over half IDUs reported unsafe injection practices, and our results suggest that personal relationships might influence IDUs’ perceptions that dictate behavior. Integrated interventions addressing individual and socio-environmental factors are needed to promote safe injection practices in this population. PMID:24920342

  1. Acupoint Injection of Onabotulinumtoxin A for Migraines

    Directory of Open Access Journals (Sweden)

    Min Hou

    2015-10-01

    Full Text Available Onabotulinumtoxin A (BoNTA has been reported to be effective in the therapy for migraines. Acupuncture has been used worldwide for the treatment of migraine attacks. Injection of a small amount of drug at acupuncture points is an innovation as compared to traditional acupuncture. The purpose of this study was to evaluate and compare the effectiveness of fixed (muscle-site and acupoint-site injections of BoNTA for migraine therapy in a randomized, double-blinded, placebo-controlled clinical trial extending over four months. Subjects with both episodic and chronic migraines respectively received a placebo (n = 19 or BoNTA (2.5 U each site, 25 U per subject injection at fixed-sites (n = 41 including occipitofrontalis, corrugator supercilii, temporalis and trapeziue, or at acupoint-sites (n = 42 including Yintang (EX-HN3, Taiyang (EX-HN5, Baihui (GV20, Shuaigu (GB8, Fengchi (GB20 and Tianzhu (BL10. The variations between baseline and BoNTA post-injection for four months were calculated monthly as outcome measures. BoNTA injections at fixed-sites and acupoint-sites significantly reduced the migraine attack frequency, intensity, duration and associated symptoms for four months compared with placebo (p < 0.01. The efficacy of BoNTA for migraines in the acupoint-site group (93% improvement was more significant than that in the fixed-site group (85% improvement (p < 0.01. BoNTA administration for migraines is effective, and at acupoint-sites shows more efficacy than at fixed-sites. Further blinded studies are necessary to establish the efficacy of a low dose toxin (25 U introduced with this methodology in chronic and episodic migraines.

  2. Vibration of safety injection pump motors; Vibrations des moteurs des pompes d`injection de securite

    Energy Technology Data Exchange (ETDEWEB)

    Wattrelos, D.

    1997-12-31

    This paper covers a fault encountered in the safety injection pump motors of the French 900 MWe unit nuclear power stations. This fault was not revealed either during the low pressure safety injection and containment spray system pump qualification test under accident conditions or during the special tests on a test bench carried out to attempt to replicate the fault and to identify ways of remedying it. This constitutes a potential common mode of failure of the safety injection system and the containment spray system pumps. The vibration phenomena illustrate the importance of carrying out test in the plants under conditions as close as possible to those of actual accident. (author).

  3. Crystal methamphetamine injection predicts slower HIV RNA suppression among injection drug users.

    Science.gov (United States)

    Fairbairn, Nadia; Kerr, Thomas; Milloy, M-J; Zhang, Ruth; Montaner, Julio; Wood, Evan

    2011-07-01

    We examined the impact of crystal methamphetamine injection on HIV RNA suppression among a prospective cohort of HIV-positive injection drug users initiating antiretroviral therapy. A multivariate Cox regression analysis found crystal methamphetamine injection to be negatively associated with viral load suppression (RH=0.63 [95% CI: 0.40-0.98]; p=0.039). This study is the first to our knowledge to demonstrate an association between crystal methamphetamine use and HIV RNA suppression. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Sequential injection lab-on-valve: the third generation of flow injection analysis

    DEFF Research Database (Denmark)

    Wang, Jianhua; Hansen, Elo Harald

    2003-01-01

    Termed the third generation of flow injection analysis, sequential injection (SI)-lab-on-valve (LOV) has specific advantages and allows novel, unique applications - not least as a versatile front end to a variety of detection techniques. This review presents snd discusses progress to date of the SI......-LOV approach as well as its applications in the automation and micro-miniaturization of on-line sample pre-treatment. Special emphasis is placed on using SI-LOV in conjunction with bead injection (BI) for on-line separation and pre-concentration of ultra-trace levels of metals by exploiting the renewable micro...

  5. Addendum: First injection technique recommendations for patients with diabetes, Forum for Injection Techniques India

    Directory of Open Access Journals (Sweden)

    Sanjay Kalra

    2013-01-01

    Full Text Available The forum for injection techniques, India recommendation, the first ever in the country on insulin injcetion techniques, have covered the science and the art of insulin injection technique in an exhaustive manner. However, a few gaps were identified in the document, which are addressed in the current addendum. This article focuses on insulin injection technique in special clinical situations, including geriatric people, women in pregnancy and those with dermatological or surgical disease who live with diabetes. The addendum also covers salient features of administration of insulin using the insulin pump.

  6. CT-guided cervical nerve root injections: comparing the immediate post-injection anesthetic-related effects of the transforaminal injection with a new indirect technique

    Energy Technology Data Exchange (ETDEWEB)

    Sutter, Reto; Pfirrmann, Christian W.A.; Peterson, Cynthia K. [Orthopaedic University Hospital of Balgrist, Department of Radiology, Zuerich (Switzerland); Zanetti, Marco [Hirslanden Hospital, Department of Radiology, Zuerich (Switzerland); Hodler, Juerg [University Hospital, Department of Radiology, Zuerich (Switzerland)

    2011-12-15

    To describe an ''indirect'' cervical nerve root injection technique with a dorsal approach that should carry less inherent risk than the ''direct'' cervical transforaminal injection approach, and to compare the immediate post-injection results of the two procedures. The indirect and direct cervical nerve root injection procedures are described in detail. Fifty-three consecutive patients receiving the indirect nerve root injections during 2009-2010 were age- and gender-matched to 53 patients who underwent direct transforaminal nerve root injections performed in 2006. Pain level data were collected immediately before and 20-30 min after each procedure. The percentages of pain change in the two groups were compared using the unpaired Student's t test. Fifty-two men (mean age 49) and 54 women (mean age 55) were included. The mean percentage of pain reduction for patients receiving indirect nerve root injections was 38.4% and for those undergoing the direct nerve root injections approach it was 43.2%. This was not significantly different (P = 0.455). No immediate or late adverse effects were reported after either injection procedure. The indirect cervical nerve root injection procedure is a potentially safer alternative to direct cervical transforaminal nerve root injections. The short-term pain reduction is similar using the two injection methods. (orig.)

  7. Subcutaneous Injection Volume of Biopharmaceuticals-Pushing the Boundaries.

    Science.gov (United States)

    Mathaes, Roman; Koulov, Atanas; Joerg, Susanne; Mahler, Hanns-Christian

    2016-08-01

    Administration into the subcutaneous (SC) tissue is a typical route of delivery for therapeutic proteins, especially for frequent treatments, long-term regimens, or self-administration. It is currently believed that the maximum volume for SC injections is approximately 1.5 mL. Larger SC injection volumes are considered to be associated with injection pain and adverse events at the injection site. However, no controlled clinical studies and actual evidence exist to support this assumption. In this review, we discuss current and publically available data related to SC administration volumes. We conclude that injection volumes higher than 3.5 mL are worth exploring if required for the development of efficacious drug treatments. Studying tissue back pressure, injection site leakage, local tolerability, and injection-related adverse events, such as injection pain, should be considered for the development of higher SC injection volumes. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  8. Influence of Injection and Cavity Pressure on the Demoulding Force in Micro-Injection Moulding

    DEFF Research Database (Denmark)

    Griffiths, C.A.; Dimov, S.S.; Scholz, S.G.

    2014-01-01

    of four process parameters, melt temperature, mould temperature, holding pressure, and injection speed, employing the design of experiment approach. In addition, the results obtained using different combinations of process parameters were analyzed to identify the best processing conditions in regards...

  9. INJECTION PROFILE MODIFICATION IN A HOT, DEEP MINNELUSA WATER INJECTION PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Lyle A. Johnson Jr.

    2001-09-01

    As oil fields in the United States age, production enhancements and modifications will be needed to increase production from deeper and hotter oil reservoirs. New techniques and products must be tested in these areas before industry will adapt them as common practice. The Minnelusa fields of northeastern Wyoming are relatively small, deep, hot fields that have been developed in the past ten to twenty years. As part of the development, operators have established waterfloods early in the life of the fields to maximize cumulative oil production. However, channeling between injectors and producers does occur and can lead to excessive water production and bypassed oil left in the reservoir. The project evaluated the use of a recently developed, high-temperature polymer to modify the injection profiles in a waterflood project in a high-temperature reservoir. The field is the Hawk Point field in Campbell County, Wyoming. The field was discovered in 1986 and initially consisted of eight producing wells with an average depth of 11,500 feet and a temperature of 260 F (127 C). The polymer system was designed to plug the higher permeable channels and fractures to provide better conformance, i.e. sweep efficiency, for the waterflood. The project used a multi-well system to evaluate the treatment. Injection profile logging was used to evaluate the injection wells both before and after the polymer treatment. The treatment program was conducted in January 2000 with a treatment of the four injection wells. The treatment sizes varied between 500 bbl and 3,918 bbl at a maximum allowable pressure of 1,700 psig. Injection in three of the wells was conducted as planned. However, the injection in the fourth well was limited to 574 bbl instead of the planned 3,750 bbl because of a rapid increase in injection pressure, even at lower than planned injection rates. Following completion of polymer placement, the injection system was not started for approximately one week to permit the gel to

  10. Influence of high injection pressure on fuel injection perfomances and diesel engine worcking process

    Directory of Open Access Journals (Sweden)

    Shatrov Mikhail G.

    2015-01-01

    Full Text Available In MADI, investigations are carried out in the field of diesel engine working process perfection for complying with prospective ecological standards such as Euro-6 and Tier-4. The article describes the results of the first stage of experimental research of the influence of injection pressure up to 3000 bar on working processes of diesel engine and its fuel system. Justification of the design of a Common Rail injector for fuel injection under 3000 bar pressure is presented. The influence of raising injection pressure (up to 3000 bar on the fuel spray propagation dynamics is demonstrated. The combined influence of injection pressure (up to 3000 bar and air boost pressure on fuel spray propagation dynamics is shown, including on engine emission and noise.

  11. Tracer injection techniques in flowing surface water

    Science.gov (United States)

    Wörman, A.

    2009-04-01

    Residence time distributions for flowing water and reactive matter are commonly used integrated properties of the transport process for determining technical issues of water resource management and in eco-hydrological science. Two general issues for tracer techniques are that the concentration-vs-time relation following a tracer injection (the breakthrough curve) gives unique transport information in different parts of the curve and separation of hydromechanical and reactive mechanisms often require simultaneous tracer injections. This presentation discusses evaluation methods for simultaneous tracer injections based on examples of tracer experiments in small rivers, streams and wetlands. Tritiated water is used as a practically inert substance to reflect the actual hydrodynamics, but other involved tracers are Cr(III)-51, P-32 and N-15. Hydromechanical, in-stream dispersion is reflected as a symmetrical spreading of the spatial concentration distribution. This requires that the transport distance over water depth is larger than about five times the flow Peclet number. Transversal retention of both inert and reactive solutes is reflected in terms of the tail of the breakthrough curve. Especially, reactive solutes can have a substantial magnification of the tailing behaviour depending on reaction rates or partitioning coefficients. To accurately discriminate between the effects of reactions and hydromechanical mixing its is relevant to use simultaneous injections of inert and reactive tracers with a sequential or integrated evaluation procedure. As an example, the slope of the P-32 tailing is consistently smaller than that of a simultaneous tritium injection in Ekeby wetland, Eskilstuna. The same applies to N-15 injected in the same experiment, but nitrogen is affected also by a systematic loss due to denitrification. Uptake in stream-bed sediments can be caused by a pumping effect arising when a variable pressure field is created on the stream bottom due to bed

  12. Analgesia for pain during subcutaneous injection: effectiveness of manual pressure application before injection.

    Science.gov (United States)

    Nakashima, Yutaka; Harada, Masanori; Okayama, Masanobu; Kajii, Eiji

    2013-01-01

    It is necessary to establish an effective subcutaneous injection procedure for adult and elderly individuals because many drugs such as hormones and interferon are generally delivered by subcutaneous injection. We tested whether pain during subcutaneous injection can be decreased by prior application of localized manual pressure at the injection site. In this semirandomized, open-label study evaluating the manual pressure method for transient analgesia, physicians applied pressure with their thumbs for 10 seconds to create a nonpainful skin depression at the injection site immediately before subcutaneous injection of the influenza vaccine to patients. Control patients received the vaccine by the same route, but without prior application of focal pressure. In addition to pain, we evaluated patient age, gender, height, weight, body mass index, body temperature, and fat thickness at the brachial triceps muscle. Pain intensity was estimated using a 100 mm visual analog scale (VAS) and the face scale (FS). Categorical variables were compared using Chi-square tests and continuous variables were compared using unpaired t-tests between the intervention group and control group. Multivariate analysis was performed using the VAS or FS score as the dependent variable and weight, age, height, fat thickness at the brachial triceps muscle, and body temperature as independent variables. There were no significant differences in demographic variables, VAS scores (22.5 ± 23.0 versus 21.2 ± 23.6, P = 0.4), or FS scores (2.5 ± 2.1 versus 2.4 ± 2.1, P = 0.4) between the intervention and control groups. There was a significant negative correlation between age and subjective pain intensity (VAS, r = -0.32; FS, r = -0.28). The manual pressure method was not effective in decreasing pain during subcutaneous injection. Alternative methods of focal transient analgesia should be developed to improve vaccination rates and relieve anxiety associated with subcutaneous injection.

  13. Risperidone Long-Acting Injections: Successful Alternative Deltoid Muscle Injections for Refractory Schizophrenia

    OpenAIRE

    Saxena, Arjun; Grace, Jeffery; Olympia, Josie L.; Trigoboff, Eileen; Watson, Thomas; Cushman, Sharon; Newcomer, David

    2008-01-01

    Treatment-resistant paranoid schizophrenia is often addressed with long-term intramuscular preparations of conventional antipsychotics (haloperidol and fluphenazine), which can be associated with the development of painful, lumpy nodules at the injection site. In this article, we present a case example of a 58-year-old male patient with paranoid schizophrenia who was treated with risperidone long-acting injection given into the deltoid muscle instead of the US Food and Drug Administration (FD...

  14. Comparison of injection drotaverine and injection valethamate bromide on duration and course of labor

    OpenAIRE

    Pradnya Rajendra Changede

    2016-01-01

    Background: Numerous drugs have been used to shorten the active phase of labor. How rationale is it to use these drugs to shorten the active phase of labor? Do they really shorten the duration of labor? What adverse effects do they have on the baby and the mother? These questions were the basis to perform the present study of comparing two of such drugs, injection drotaverine and injection Valethamate bromide with control subjects. Methods: This was a prospective study conducted in a terti...

  15. Meta-Analysis of the Clinical Value of Danshen Injection and Huangqi Injection in Liver Cirrhosis

    Directory of Open Access Journals (Sweden)

    Changtai Zhu

    2013-01-01

    Full Text Available Objective. To evaluate the clinical value of Danshen injection and Huangqi injection for the treatment of liver cirrhosis. Methods. The Chinese Biomedical Literature Database (CBM, Chinese Scientific Journals Full-Text Database (VIP, Wanfang Database, China National Knowledge Infrastructure (CNKI, PubMed, and EMBASE database were searched to collect the literatures about the randomized controlled trials involving the treatment of liver cirrhosis with Danshen injection combined with Huangqi injection, and the data analyses were performed using RevMan 4.2 software. Results. A total of 11 studies involving 1086 patients (trials group: 554 cases, control group: 532 cases were included in this study. Compared with those in control group, the meta-analysis showed-that the total effectiveness rate and the level of serum albumin increased, while serum total bilirubin, alanine transmninase, type III procollagen, hyaluronic acid, laminin, and type-IV collagen decreased in trials group. The Jadad score ranged from 1 to 2 and the funnel plot analysis suggests that publication bias may occur. Conclusions. Danshen injection combined with Huangqi injection may promote the curative efficacy of liver cirrhosis, which is a promising novel treatment approach. The exact outcome needs to perform rigorously designed, multicenter, and large randomized controlled trials.

  16. Rapid assessment of injection practices in Cambodia, 2002

    Directory of Open Access Journals (Sweden)

    Goldstein Susan

    2005-06-01

    Full Text Available Abstract Background Injection overuse and unsafe injection practices facilitate transmission of bloodborne pathogens such as hepatitis B virus (HBV, hepatitis C virus (HCV, and human immunodeficiency virus (HIV. Anecdotal reports of unsafe and unnecessary therapeutic injections and the high prevalence of HBV (8.0%, HCV (6.5%, and HIV (2.6% infection in Cambodia have raised concern over injection safety. To estimate the magnitude and patterns of such practices, a rapid assessment of injection practices was conducted. Methods We surveyed a random sample of the general population in Takeo Province and convenience samples of prescribers and injection providers in Takeo Province and Phnom Penh city regarding injection-related knowledge, attitudes, and practices. Injection providers were observed administering injections. Data were collected using standardized methods adapted from the World Health Organization safe injection assessment guidelines. Results Among the general population sample (n = 500, the overall injection rate was 5.9 injections per person-year, with 40% of participants reporting receipt of ≥ 1 injection during the previous 6 months. Therapeutic injections, intravenous infusions, and immunizations accounted for 74%, 16% and 10% of injections, respectively. The majority (>85% of injections were received in the private sector. All participants who recalled their last injection reported the injection was administered with a newly opened disposable syringe and needle. Prescribers (n = 60 reported that 47% of the total prescriptions they wrote included a therapeutic injection or infusion. Among injection providers (n = 60, 58% recapped the syringe after use and 13% did not dispose of the used needle and syringe appropriately. Over half (53% of the providers reported a needlestick injury during the previous 12 months. Ninety percent of prescribers and injection providers were aware HBV, HCV, and HIV were transmitted through unsafe

  17. Injection Beam Loss and Beam Quality Checks for the LHC

    CERN Document Server

    Kain, Verena; Bartmann, Wolfgang; Bracco, Chiara; Drosdal, Lene; Holzer, Eva; Khasbulatov, Denis; Magnin, Nicolas; Meddahi, Malika; Nordt, Annika; Sapinski, Mariusz; Vogt, Mathias

    2010-01-01

    The quality of the injection into the LHC is monitored by a dedicated software system which acquires and analyses the pulse waveforms from the injection kickers, and measures key beam parameters and compares them with the nominal ones. The beam losses at injection are monitored on many critical devices in the injection regions, together with the longitudinal filling pattern and maximum trajectory offset on the first 100 turns. The paper describes the injection quality check system and the results from LHC beam commissioning, in particular the beam losses measured during injection at the various aperture limits. The results are extrapolated to full intensity and the consequences are discussed

  18. Charge Injection and Transport in Conjugated Polymers.

    Science.gov (United States)

    Malliaras, George

    2007-03-01

    We will overview the state-of-the-art in our understanding of charge injection and transport in conjugated polymers. We start by discussing the identifying characteristics of this class of materials, especially in relation with their structure and morphology. We follow by reviewing the advantages and limitations of experimental techniques that are used to probe charge transport. We then embark on a discussion of the fundamentals of charge transport in organics. We follow a didactic approach, where we start from transport in crystalline semiconductors and gradually introduce corrections for space charge effects, for the influence of disorder on mobility, for high charge densities, and for electric field-dependent charge densities. We compare with experimental data from polyfluorenes. We then shift our attention to charge injection. We review some of the recent theories and compared their predictions to experimental data, again from polyfluorenes. We close by proposing directions for future work.

  19. Micro Injection Moulding of Polymeric Components

    Science.gov (United States)

    Trotta, G.; Surace, R.; Modica, F.; Spina, R.; Fassi, I.

    2011-01-01

    Micro components and micro devices are strongly used in several fields: IT components, biomedical and medical products, automotive industry, telecommunication area and aerospace. A micro component is characterized by small dimensions of the product itself or small dimensions of the functional features. The development of new micro parts is highly dependent on manufacturing systems that can reliably and economically produce micro components in large quantities. In this context, micro-electrical discharge machining (EDM) for mould production and micro-injection moulding of polymer materials are the key technologies for micro manufacturing. This paper will focus on the production and quality evaluation of polymeric micro components manufactured by micro injection moulding. In particular the authors want to investigate the process parameters on the overall quality of the product. The factors affecting micro flow behavior, components weights and dimension definition are experimentally studied basing on DoE approach and then discussed.

  20. Current injection electrodes for electrical impedance tomography.

    Science.gov (United States)

    Armstrong, S; Jennings, D

    2004-08-01

    Current conveyors have been identified as a possible component within the current injection electrodes of an electrical impedance tomography system, where accurate current generation or precise measurement of the current injected is required. Several circuit configurations have been investigated through simulation to determine the most suitable to meet the specifications of the EIT system. A bipolar (floating source) circuit configuration employing the use of current conveyors has been designed, which achieves greater than 12 mA output current without saturation, over an accepted body impedance range. Simulations were performed over frequencies in excess of 1 MHz, and the output phase shift was less than 0.15 degrees up to 250 kHz, and 0.6 degrees up to 1 MHz.

  1. Dense Plasma Injection Experiment at MCX

    Science.gov (United States)

    Uzun-Kaymak, I.; Messer, S.; Bomgardner, R.; Case, A.; Clary, R.; Ellis, R.; Elton, R.; Hassam, A.; Teodorescu, C.; Witherspoon, D.; Young, W.

    2009-09-01

    We present preliminary results of the High Density Plasma Injection Experiment at the Maryland Centrifugal Experiment (MCX). HyperV Technologies Corp. has designed, built, and installed a prototype coaxial gun to drive rotation in MCX. This gun has been designed to avoid the blow-by instability via a combination of electrode shaping and a tailored plasma armature. An array of diagnostics indicates the gun is capable of plasma jets with a mass of 160 μg at 70 km/s with an average plasma density above 1015 cm-3. Preliminary measurements are underway at MCX to understand the penetration of the plasma jet through the MCX magnetic field and the momentum transfer from the jet to the MCX plasma. Data will be presented for a wide range of MCX field parameters, and the prospects for future injection experiments will be evaluated.

  2. Stepwise injection spectrophotometric determination of epinephrine.

    Science.gov (United States)

    Bulatov, Andrey V; Petrova, Anastasiia V; Vishnikin, Andriy B; Moskvin, Aleksey L; Moskvin, Leonid N

    2012-07-15

    Simple, rapid and fully automated methods for the manual and automated spectrophotometric determination of epinephrine have been developed by using schemes of stepwise injection (SWIA) and sequential injection analysis (SIA) implemented in the same manifold. The determination is based on the formation of reduced form of 18-molybdodiphosphate heteropoly anion by its reaction with epinephrine. Using of the reaction vessel in the general SWIA configuration instead of a holding and reaction coil in the SIA manifold provides several essential advantages, including higher sensitivity and lower reagent consumption. The linear dependence of the analytical signal on the epinephrine concentration was preserved over the range of 1.5-30, 3.0-30, and 1.5-25μmolL(-1) by using of SWIA, SIA and spectrophotometric analysis, respectively. The relative standard deviation for the SWIA determination of 10μmolL(-1) epinephrine was 1.8% (n=10). Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Injection of photoelectrons into dense argon gas

    CERN Document Server

    Borghesani, A F

    2010-01-01

    The injection of photoelectrons in a gaseous or liquid sample is a widespread technique to produce a cold plasma in a weakly--ionized system in order to study the transport properties of electrons in a dense gas or liquid. We report here the experimental results of photoelectron injection into dense argon gas at the temperatureT=142.6 K as a function of the externally applied electric field and gas density. We show that the experimental data can be interpreted in terms of the so called Young-Bradbury model only if multiple scattering effects due to the dense environment are taken into account when computing the scattering properties and the energetics of the electrons.

  4. Hip Pain: Dry Needling Versus Cortisone Injections.

    Science.gov (United States)

    2017-04-01

    Greater trochanteric pain syndrome (GTPS) is chronic, intermittent pain and tenderness on the outside of the hip. The medical community once thought that a swollen hip bursa was the source of such pain, which led to the use of corticosteroid injections to the bursa to help decrease swelling and pain. However, researchers now believe that injuries to the muscles and tendons around the hip are the actual cause of this pain, and that inflammation is often not involved. A study published in the April 2017 issue of JOSPT explores dry needling as an alternative to cortisone injections to reduce pain and improve function in patients with GTPS. J Orthop Sports Phys Ther 2017;47(4):240. doi:10.2519/jospt.2017.0504.

  5. Zinc injection in German PWR plants

    Energy Technology Data Exchange (ETDEWEB)

    Stellwag, B. [Framatome ANP GmbH, Erlangen (Germany); Juergensen, M. [Kernkraftwerk Obrigheim GmbH (Germany); Wolter, D. [RWE Power AG, Kraftwerk Biblis (Germany)

    2002-07-01

    Zinc injection for further reduction of radiation fields was introduced at Unit B of Biblis Nuclear Power Station in September 1996 and at Obrigheim Nuclear Power Station in February 1998. Zinc injection is still being implemented today at these plants. This paper gives an overview of the experience acquired with the method, including the annual refueling outages in the year 2001. The main topic addressed by the paper is the evolution of dose rates at the primary system and work-related doses since introduction of the method. Reductions in high dose rate areas have meanwhile achieved values of 40 to 50%. Annual collective doses per man-hour spent in the controlled access area of the plant as well as personal doses for specific activities are also decreasing. (authors)

  6. ALL-FERRITE RHIC INJECTION KICKER

    Energy Technology Data Exchange (ETDEWEB)

    HAHN,H.; FISCHER,W.; PTITSYN,V.I.; TUOZZOLO,J.E.

    2001-06-18

    Ion beams are transferred from the AGS into RHIC in boxcar fashion as single bunches. The nominal design assumes 60 bunches per ring but increasing the number of bunches to gain luminosity is possible, thereby requiring injection kickers with a shorter rise time. The original injection system consists of traveling-wave dielectric loaded kicker magnets and a Blumlein pulser with a rise time adequate for the present operation. Voltage breakdown in the dielectric kickers suggested the use of all-ferrite magnets. In order to minimize the conversion cost, the design of the all-ferrite kicker uses the same components as the dielectric loaded units. The all-ferrite kickers showed in bench measured good breakdown properties and a current rise time of < 50 ns. A prototype kicker has been installed in the blue ring and was tested with beam. Beam measurements indicate suitability of all-ferrite kicker magnets for upgraded operation.

  7. Design of tunneling injection quantum dot lasers

    Institute of Scientific and Technical Information of China (English)

    JIA Guo-zhi; YAO Jiang-hong; SHU Yong-chun; WANG Zhan-guo

    2007-01-01

    To implement high quality tunneling injection quantum dot lasers,effects of primary factors on performance of the tunneling injection quantum dot lasers were investigated. The considered factors were tunneling probability,tunneling time and carriers thermal escape time from the quantum well. The calculation results show that with increasing of the ground-state energy level in quantum well,the tunneling probability increases and the tunneling time decreases,while the thermal escape time decreases because the ground-state energy levelis shallower. Longitudinal optical phonon-assisted tunneling can be an effective method to solve the problem that both the tunneling time and the thermal escape time decrease simultaneously with the ground-state energy level increasing in quantum well.

  8. Simulation of the injection moulding process

    Science.gov (United States)

    Hu, J.; Christensen, T.

    1993-12-01

    Simulation of the injection molding process is a helpful way for the engineers who work with plastics processing. By simulation, they will get some important parameters which sometimes are highly necessary for the mold design and processing. Thus, the engineers will save much time to do experiments for the parameters. Two simulation programs are used in this report, namely CADMOULD and CADMOULD MEFISTO which are designed by Institut fur Kunststoffverarbeitung (IKV) in Aachen, W. Germany. CADMOULD works with 2-D geometry and is specialized for rheological, thermal and mechanical calculation. It is installed on a personal computer, while CADMOULD MEFISTO works in 3-D and is installed on a VAX 8530 computer at SINTEF. A PC version of this program is also available. This report deals with CADMOULD and CADMOULD MEFISTO. The construction of flow lines, balancing of sprue system, the optimizing of injection time, and gate(s) optimizing are mainly included.

  9. Stability of ranitidine in injectable solutions.

    Science.gov (United States)

    Vehabovic, Midhat; Hadzovic, Sabira; Stambolic, Fatima; Hadzic, Amina; Vranjes, Elvedina; Haracic, Ediba

    2003-04-30

    Injectable solutions of ranitidine were prepared by dissolving ranitidine hydrochloride in water for injections. The following buffering system has been used: disodium phosphate (anhydrous), potassium dihydrogen phosphate, and phenol as a preservative. Inert gas (nitrogen) was used to displace oxygen from a solution and reduce the possibility of oxidative changes in the formulation. The solution was poured into 2-ml brown glass ampoules in asceptic condition. Ampoules samples have been stored at three different temperatures. They have been stored at 55 and 40 degrees C for 6 months, and at 25 degrees C for 12 months. TLC technique has been used for monitoring related substances, and HPLC technique for monitoring phenol and ranitidine content. It has been shown that only those samples that were stored at 25 degrees C were actually stable.

  10. Steam injection in Colombia under challenging environment

    Energy Technology Data Exchange (ETDEWEB)

    Waghray, J.P. [Mansovar Energy Colombia Ltd (Colombia)

    2011-07-01

    Mansarovar Energy Columbia Ltd. is a company extracting heavy oil from its Colombian fields. In order to enhance the production and at the same time to contribute to the economic recovery, they are using the cyclic steam injection method. The aim of this presentation is to show what are the challenges facing heavy oil extraction in Colombia, what is the state of the art, and what needs to be improved. Heavy oil extraction in Colombia presents two sorts of challenges: operational ones related to sanding problems and diluents and gas availability; and commercial ones, related to low return rates. The use of steam injection in conventional wells can, however, increase both productivity and the rate of return while at the same time enhancing the recovery factor by 10 to 15%. For the future, improvement in drilling and completion, production, and steam efficiency will be necessary as well as the implementation of the appropriate enhanced oil recovery processes.

  11. Modeling liver electrical conductivity during hypertonic injection.

    Science.gov (United States)

    Castellví, Quim; Sánchez-Velázquez, Patricia; Moll, Xavier; Berjano, Enrique; Andaluz, Anna; Burdío, Fernando; Bijnens, Bart; Ivorra, Antoni

    2017-05-30

    Metastases in the liver frequently grow as scattered tumor nodules that neither can be removed by surgical resection nor focally ablated. Previously, we have proposed a novel technique based on irreversible electroporation that may be able to simultaneously treat all nodules in the liver while sparing healthy tissue. The proposed technique requires increasing the electrical conductivity of healthy liver by injecting a hypersaline solution through the portal vein. Aiming to assess the capability of increasing the global conductivity of the liver by means of hypersaline fluids, here, it is presented a mathematical model that estimates the NaCl distribution within the liver and the resulting conductivity change. The model fuses well-established compartmental pharmacokinetic models of the organ with saline injection models used for resuscitation treatments, and it considers changes in sinusoidal blood viscosity because of the hypertonicity of the solution. Here, it is also described a pilot experimental study in pigs in which different volumes of NaCl 20% (from 100 to 200 mL) were injected through the portal vein at different flow rates (from 53 to 171 mL/minute). The in vivo conductivity results fit those obtained by the model, both quantitatively and qualitatively, being able to predict the maximum conductivity with a 14.6% average relative error. The maximum conductivity value was 0.44 second/m, which corresponds to increasing 4 times the mean basal conductivity (0.11 second/m). The results suggest that the presented model is well suited for predicting on liver conductivity changes during hypertonic saline injection. Copyright © 2017 John Wiley & Sons, Ltd.

  12. Terrestrial VLF transmitter injection into the magnetosphere

    OpenAIRE

    2012-01-01

    Terrestrial VLF transmitter injection into the magnetosphere M. B. Cohen1 and U. S. Inan1,2 Received 1 June 2012; revised 15 June 2012; accepted 18 June 2012; published 9 August 2012. [1] Very Low Frequency (VLF, 3–30 kHz) radio waves emitted from ground sources (transmitters and lightning) strongly impact the radiation belts, driving electron precipitation via whistler-electron gyroresonance, and contributing to the formation of the slot region. However, calculations of the...

  13. Point Injection for Treating Nephritic Colic

    Institute of Scientific and Technical Information of China (English)

    李文彬; 刘文元; 姜宏睿

    2002-01-01

    Since 1994, the authors have treated 101 cases of nephritic colic by point injection therapy and achieved good curative results. Of them, 70 cases were diagnosed as having renal or ureteral calculi confirmed by abdominal X-ray and B-ultrasonic examination; and the others had the following symptoms: 1) sudden onset; 2) angina in unilateral lumbar and abdominal regions; 3) percussion-induced pain in the ipsilateral kidney region; and 4) erythrocytes or visible blood in urine found by laboratory test.

  14. HIV and Injection Drug Use PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2016-11-29

    This 60 second public service announcement is based on the December 2016 CDC Vital Signs report. Sharing needles, syringes, and other injection equipment puts you at risk for getting HIV and other infections, including hepatitis. Learn how to reduce your HIV risk.  Created: 11/29/2016 by National Center for HIV/AIDS, Viral Hepatitis, Sexual Transmitted Diseases and Tuberculosis Prevention (NCHHSTP).   Date Released: 11/29/2016.

  15. Acute pneumonitis secondary to subcutaneous silicone injection

    Directory of Open Access Journals (Sweden)

    Gopie P

    2011-06-01

    Full Text Available Priya Gopie, Sateesh Sakhamuri, Anu Sharma, Sanjeev Solomon, Surujpal TeelucksinghClinical Medical Sciences, University of the West Indies, St Augustine, TrinidadAbstract: Following silicone injection, end organ toxicity can occur. To our knowledge this report documents the first case of silicone embolization in the Caribbean and serves to highlight an emergent danger associated with its illicit use for cosmetic purposes in this region.Keywords: silicone, silicone embolism, silicone pneumonitis, alveolar hemorrhage, pneumonitis

  16. Ultrasound-guided sacroiliac joint injection technique.

    LENUS (Irish Health Repository)

    Harmon, Dominic

    2008-07-01

    We describe a case report and technique for using a portable ultrasound scanner and a curvilinear transducer (4-5MHz) (SonoSite Micromaxx SonoSite, Inc. 21919 30th Drive SE Bothwell W. A.) to guide sacroiliac joint (SIJ) injection. A 42-year-old male presented with chronic lower back pain centered on his left SIJ. His pain averaged 7 out of 10 (numerical rating scale). For the ultrasound-guided SIJ injection the patient was placed in the prone position. The ultrasound transducer was oriented in a transverse orientation at the level of the sacral hiatus. Here the sacral cornuae were identified. Moving the transducer laterally from here, the lateral edge of the sacrum was identified. This bony edge was followed in a cephalad direction with the transducer maintained in a transverse orientation. A second bony contour, the ileum, was identified. The cleft between both bony contours represented the sacroiliac joint. This was found at 4.5 cm depth. Real-time imaging was used to direct a 22G spinal needle into the SIJ, where solution was injected under direct vision. The patient\\'s pain intensity decreased to a 2 out of 10 (numerical rating scale). Function improved and the patient was able to return to work. These improvements were maintained at 16 weeks. Ultrasound guidance does not expose patients and personnel to radiation and is readily accessible. Ultrasound-guided SIJ injections may have particular applications in the management of chronic lower back pain in certain clinical scenarios (e.g. pregnancy). Future studies to demonstrate efficacy and reproducibility are needed.

  17. Computational Analysis of Safety Injection Tank Performance

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Jai Oan; Nietiadia, Yohanes Setiawan; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of); Addad, Yacine; Yoon, Ho Joon [Khalifa University of Science Technology and Research, Abu Dhabi (United Arab Emirates)

    2015-10-15

    The APR 1400 is a large pressurized water reactor (PWR). Just like many other water reactors, it has an emergency core cooling system (ECCS). One of the most important components in the ECCS is the safety injection tank (SIT). Inside the SIT, a fluidic device is installed, which passively controls the mass flow of the safety injection and eliminates the need for low pressure safety injection pumps. As more passive safety mechanisms are being pursued, it has become more important to understand flow structure and the loss mechanism within the fluidic device. Current computational fluid dynamics (CFD) calculations have had limited success in predicting the fluid flow accurately. This study proposes to find a more exact result using CFD and more realistic modeling. The SIT of APR1400 was analyzed using MARS and CFD. CFD calculation was executed first to obtain the form loss factor. Using the two form loss factors from the vendor and calculation, calculation using MARS was performed to compare with experiment. The accumulator model in MARS was quite accurate in predicting the water level. The pipe model showed some difference with the experimental data in the water level.

  18. Fungal Infections Associated with Contaminated Steroid Injections.

    Science.gov (United States)

    Kauffman, Carol A; Malani, Anurag N

    2016-04-01

    In mid-September 2012, the largest healthcare-associated outbreak in U.S. history began. Before it was over, 751 patients were reported with fungal meningitis, stroke, spinal or paraspinal infection, or peripheral osteoarticular infection, and 64 (8.5%) died. Most patients had undergone epidural injection, and a few osteoarticular injection, of methylprednisolone acetate that had been manufactured at the New England Compounding Center (NECC). The offending pathogen in most cases was Exserohilum rostratum, a brown-black soil organism that previously was a rare cause of human infection. Three lots of methylprednisolone were contaminated with mold at NECC; the mold from unopened bottles of methylprednisolone was identical by whole-genome sequencing to the mold that was isolated from ill patients. Early cases manifested as meningitis, some patients suffered posterior circulation strokes, and later cases were more likely to present with localized infection at the injection site, including epidural abscess or phlegmon, vertebral diskitis or osteomyelitis, and arachnoiditis with intradural involvement of nerve roots. Many patients with spinal or paraspinal infection required surgical intervention. Recommendations for treatment evolved over the first few weeks of the outbreak. Initially, combination therapy with liposomal amphotericin B and voriconazole was recommended for all patients; later, combination therapy was recommended only for those who were most ill, and voriconazole monotherapy was recommended for most patients. Among those patients who continued antifungal therapy for at least 6 months, outcomes for most appeared to be successful, although a few patients remain on therapy.

  19. Tomography at Injection in the PSB

    CERN Document Server

    Hancock, Steven

    2016-01-01

    The PSB was conceived as an intensity booster for fixed-target physics. Consequently, no attempt was ever made to synchronize the turns injected into each ring with the rf in that ring because as many as a dozen such turns were expected to be superposed longitudinally [1]. When only a small, non-integer number of turns is injected, this asynchronism results in a particle distribution whose initial phase fluctuates wildly from shot to shot with respect to the rf bucket into which it is subsequently captured. This has long been suspected to be an ingredient in the intensity non-reproducibility observed for low-intensity beams, such as pilot beams for the LHC [2]. An MD cycle has been built to pursue this suspicion (in one ring, at least) by introducing, in a fully ppm fashion, distributor timings that are first resynchronized to the rf train of Ring3 and that then count 40 MHz clock ticks to reduce any jitter to just 25 ns (cf., the bucket duration at Booster injection is 1.67 μs). Leaving aside the origin...

  20. Injection of iodine to the stratosphere

    Science.gov (United States)

    Saiz-Lopez, Alfonso; Baidar, Sunil; Cuevas, Carlos A.; Koening, Theodore; Fernandez, Rafael P.; Dix, Barbara; Kinnison, Douglas E.; Lamarque, Jean-Francois; Rodriguez-Lloveras, Xavier; Campos, Teresa L.; Volkamer, Rainer

    2016-04-01

    There are still many uncertainties about the influence of iodine chemistry in the stratosphere, as the real amount of reactive iodine injected to this layer the troposphere and the partitioning of iodine species are still unknown. In this work we report a new estimation of the injection of iodine into the stratosphere based on novel daytime (SZA layer (TORERO campaign) and a 3D global chemistry-climate model (CAM-Chem) with the most recent knowledge about iodine photochemistry. The results indicate that significant levels of total reactive iodine (0.25-0.7 pptv), between 2 and 5 times larger than the accepted upper limits, could be injected into the stratosphere via tropical convective outflow. At these iodine levels, modelled iodine catalytic cycles account for up to 30% of the contemporary ozone loss in the tropical lower stratosphere and can exert a stratospheric ozone depletion potential equivalent or even larger than that of very short-lived bromocarbons. Therefore, we suggest that iodine sources and chemistry need to be considered in assessments of the historical and future evolution of the stratospheric ozone layer.

  1. Migration of monocytes after intracerebral injection.

    Science.gov (United States)

    Kaminski, Miriam; Bechmann, Ingo; Kiwit, Jürgen; Glumm, Jana

    2012-01-01

    Recently, we monitored green fluorescent protein (GFP)-expressing monocytes after injection at the entorhinal cortex lesion (ECL) site in mice. We followed their migration out of the central nervous system (CNS) along olfactory nerve fibers penetrating the lamina cribrosa, within the nasal mucosa, and their subsequent appearance within the deep cervical lymph nodes (CLN), with numbers peaking at day 7. This is the same route activated T cells use for reaching the CLN, as we have shown before. Interestingly, GFP cells injected into the brain and subsequently found in the CLN exhibited ramified morphologies, which are typical of microglia and dendritic cells. To gain more insight into immunity and regeneration within the CNS we want to monitor injected monocytes using magnetic resonance imaging (MRI) after labeling with very small superparamagnetic iron oxide particles (VSOP). Due to their small size, nanoparticles have huge potential for magnetic labeling of different cell populations and their MRI tracking in vivo. So far we have verified that incubation with VSOP particles does not alter their migration pattern after ECL.

  2. PEP-II injection timing and controls

    Energy Technology Data Exchange (ETDEWEB)

    Bharadwaj, V.; Browne, M.; Crane, M.; Gromme, T.; Himel, T.; Ross, M.; Stanek, M. [Stanford Linear Accelerator Center, Menlo Park, CA (United States); Ronan, M. [Lawrence Berkeley National Lab., CA (United States)

    1997-07-01

    Hardware has been built and software written and incorporated in the existing SLC accelerator control system to control injection of beam pulses from the accelerator into the PEP-II storage rings currently under construction. Hardware includes a CAMAC module to delay the machine timing fiducial in order that a beam pulse extracted from a damping ring will be injected into a selected group of four 476 MHz buckets in a PEP-II ring. Further timing control is accomplished by shifting the phase of the bunches stored in the damping rings before extraction while leaving the phase of the PEP-II stored beam unchanged. The software which drives timing devices on a pulse-to-pulse basis relies on a dedicated communication link on which one scheduling microprocessor broadcasts a 128-bit message to all distributed control microprocessors at 360 Hz. PEP-II injection will be driven by the scheduling microprocessor according to lists specifying bucket numbers in arbitrary order, and according to scheduling constraints maximizing the useful beam delivered to the SLC collider currently in operation. These lists will be generated by a microprocessor monitoring the current stored per bucket in each of the PEP-II rings.

  3. Modular injection systems for miniature engines

    Science.gov (United States)

    Cochran, Mike

    1992-07-01

    Mission requirements for Kinetic Energy Weapons will require miniaturization of current vehicle propulsion systems for future Space Defence Iniative Programs. A modular injection system (MIS) valve is presented which will decrease cost, size and weight of miniaturized storable bipropellant rocket engines and features two poppet-type propellant valve modules pneumatically linked to a pilot solenoid module. A prototype modular injection valve sized for 100lbf thrust was designed and is being tested to show lower costs, fewer moving parts and a reduction in weight and size. Results show that this valve meets objectives of one-half weight, one-half cost and one-fifth the envelopment of current production valves. Studies indicate that a cruciform configuration of four nominal 100lbf thrust engines can be controlled by four modular injection valve systems in a single housing of less than 1.0 m3. Following further development and correlation of results this concept may be scaled to control four higher thrust engines.

  4. Target injection methods for inertial fusion energy

    Energy Technology Data Exchange (ETDEWEB)

    Petzoldt, R.W.; Moir, R.W.

    1994-06-01

    We have studied four methods to inject IFE targets: the gas gun, electrostatic accelerator, induction accelerator, and rail gun. We recommend a gas gun for indirect drive targets because they can support a gas pressure load on one end and can slide along the gun barrel without damage. With the gas gun, the amount of gas required for each target (about 10 to 100 mg) is acceptable; for other types of targets, a sabot would be necessary. A cam and poppet valve arrangement is recommended for gas flow control. An electrostatic accelerator is attractive for use with lightweight spherical direct drive targets. Since there is no physical contact between the target and the injector, there will be no wear of either component during the injection process. An induction accelerator has an advantage of no electrical contact between the target and the injector. Physical contact is not even necessary, so the wear should be minimal. It requires a cylindrical conductive target sleeve which is a substantial added mass. A rail gun is a simpler device than an electrostatic accelerator or induction accelerator. It requires electrical contact between the target and the rails and may have a significant wear rate. The wear in a vacuum could be reduced by use of a solid lubricant such as MoS{sub 2}. The total required accuracy of target injection, tracking and beam pointing of {plus_minus}0.4 mm appears achievable but will require development and experimental verification.

  5. Target injection methods for inertial fusion energy

    Science.gov (United States)

    Petzoldt, Ronald W.; Moir, Ralph W.

    1994-06-01

    We have studied four methods to inject IFE targets: the gas gun, electrostatic accelerator, induction accelerator, and rail gun. We recommend a gas gun for indirect drive targets because they can support a gas pressure load on one end and can slide along the gun barrel without damage. With the gas gun, the amount of gas required for each target (about 10 to 100 mg) is acceptable; for other types of targets, a sabot would be necessary. A cam and poppet valve arrangement is recommended for gas flow control. An electrostatic accelerator is attractive for use with lightweight spherical direct drive targets. Since there is no physical contact between the target and the injector, there will be no wear of either component during the injection process. An induction accelerator has an advantage of no electrical contact between the target and the injector. Physical contact is not even necessary, so the wear should be minimal. It requires a cylindrical conductive target sleeve which is a substantial added mass. A rail gun is a simpler device than an electrostatic accelerator or induction accelerator. It requires electrical contact between the target and the rails and may have a significant wear rate. The wear in a vacuum could be reduced by use of a solid lubricant such as MoS2. The total required accuracy of target injection, tracking and beam pointing of +/- 0.4 mm appears achievable but will require development and experimental verification.

  6. Injectable silk foams for soft tissue regeneration.

    Science.gov (United States)

    Bellas, Evangelia; Lo, Tim J; Fournier, Eric P; Brown, Joseph E; Abbott, Rosalyn D; Gil, Eun S; Marra, Kacey G; Rubin, J Peter; Leisk, Gary G; Kaplan, David L

    2015-02-18

    Soft tissue fillers are needed for restoration of a defect or augmentation of existing tissues. Autografts and lipotransfer have been under study for soft tissue reconstruction but yield inconsistent results, often with considerable resorption of the grafted tissue. A minimally invasive procedure would reduce scarring and recovery time as well as allow the implant and/or grafted tissue to be placed closer to existing vasculature. Here, the feasibility of an injectable silk foam for soft tissue regeneration is demonstrated. Adipose-derived stem cells survive and migrate through the foam over a 10-d period in vitro. The silk foams are also successfully injected into the subcutaneous space in a rat and over a 3-month period integrating with the surrounding native tissue. The injected foams are palpable and soft to the touch through the skin and returning to their original dimensions after pressure is applied and then released. The foams readily absorb lipoaspirate making the foams useful as a scaffold or template for existing soft tissue filler technologies, useful either as a biomaterial alone or in combination with the lipoaspirate.

  7. Water injection in various fields of Argentina

    Energy Technology Data Exchange (ETDEWEB)

    1969-10-01

    Two successful pilot flood tests conducted in the Argentine oil fields have been sufficiently successful to indicate to Yacimientos Petroliferos Fiscales (YPF) that many other fields having similar reservoir characteristics would respond well to waterflooding. In 1966, YPF contracted with companies specializing in secondary recovery to make a study of these 4 reservoirs: Canadon Leon, in Santa Cruz, to the south of Comodoro Rivadavia; Barrancas South, in Mendoza; and El Sauce and Cerro Bandera, both in Neuquen (as indicated on the base map). These studies revealed which of the formations were most likely to respond to water injection. For Canadon Leon and Barrancas, pilot operations were recommended, while for the others, water injection on a large scale was recommended. The scheme of large-scale waterflooding for Cerro Bandera (Neuquen) and El Sauce (Neuquen) is illustrated. In Canadon Leon and Barrancas alone, secondary recovery is expected to increase the oil recovery to around 3,500,000 bbl; of this total 1,327,282 is primary and 2,190,000 is secondary recovery. Tabular data show the anticipated results of water injection in the 4 studied fields.

  8. Relative injectivity and CS-modules

    Directory of Open Access Journals (Sweden)

    Mahmoud Ahmed Kamal

    1994-01-01

    Full Text Available In this paper we show that a direct decomposition of modules M⊕N, with N homologically independent to the injective hull of M, is a CS-module if and only if N is injective relative to M and both of M and N are CS-modules. As an application, we prove that a direct sum of a non-singular semisimple module and a quasi-continuous module with zero socle is quasi-continuous. This result is known for quasi-injective modules. But when we confine ourselves to CS-modules we need no conditions on their socles. Then we investigate direct sums of CS-modules which are pairwise relatively inective. We show that every finite direct sum of such modules is a CS-module. This result is known for quasi-continuous modules. For the case of infinite direct sums, one has to add an extra condition. Finally, we briefly discuss modules in which every two direct summands are relatively inective.

  9. Sonographically guided deep plantar fascia injections: where does the injectate go?

    Science.gov (United States)

    Maida, Eugene; Presley, James C; Murthy, Naveen; Pawlina, Wojciech; Smith, Jay

    2013-08-01

    To determine the distribution of sonographically guided deep plantar fascia injections in an unembalmed cadaveric model. A single experienced operator completed 10 sonographically guided deep plantar fascia injections in 10 unembalmed cadaveric specimens (5 right and 5 left) obtained from 6 donors (2 male and 4 female) aged 49 to 95 years (mean, 77.5 years) with a mean body mass index of 23.2 kg/m(2) (range, 18.4-26.3 kg/m(2)). A 12-3-MHz linear array transducer was used to direct a 22-gauge, 38-mm stainless steel needle deep to the plantar fascia at the anterior aspect of the calcaneus using an in-plane, medial-to-lateral approach. In each case, 1.5 mL of 50% diluted colored latex was injected deep to the plantar fascia. After a minimum of 72 hours, study coinvestigators dissected each specimen to assess injectate placement. All 10 injections accurately placed latex adjacent to the deep side of the plantar fascia at the anterior calcaneus. However, the flexor digitorum brevis (FDB) origin from the plantar fascia variably limited direct latex contact with the plantar fascia, and small amounts of latex interdigitated with the FDB origin in 90% (9 of 10). In all 10 specimens, latex also covered the traversing first branch of the lateral plantar nerve (FBLPN, ie, Baxter nerve) between the FDB and quadratus plantae muscles. No latex was found in the plantar fat pad or plantar fascia in any specimen. Sonographically guided deep plantar fascia injections reliably deliver latex deep to the plantar fascia while avoiding intrafascial injection. However, the extent of direct plantar fascia contact is variable due to the intervening FDB. On the contrary, the traversing FBLPN is reliably covered by the injection. Deep plantar fascia injections may have a role in the management of refractory plantar fasciitis, particularly following failed superficial perifascial or intrafascial injections, in cases of preferential deep plantar fascia involvement, or when entrapment

  10. Strategies and challenges for safe injection practice in developing countries.

    Science.gov (United States)

    Gyawali, Sudesh; Rathore, Devendra Singh; Shankar, P Ravi; Kumar, Kc Vikash

    2013-01-01

    Injection is one of the important health care procedures used globally to administer drugs. Its unsafe use can transmit various blood borne pathogens. This article aims to review the history and status of injection practices, its importance, interventions and the challenges for safe injection practice in developing countries. The history of injections started with the discovery of syringe in the early nineteenth century. Safe injection practice in developed countries was initiated in the early twentieth century but has not received adequate attention in developing countries. The establishment of "Safe Injection Global Network (SIGN)" was an milestone towards safe injection practice globally. In developing countries, people perceive injection as a powerful healing tool and do not hesitate to pay more for injections. Unsafe disposal and reuse of contaminated syringe is common. Ensuring safe injection practice is one of the greatest challenges for healthcare system in developing countries. To address the problem, interventions with active involvement of a number of stakeholders is essential. A combination of educational, managerial and regulatory strategies is found to be effective and economically viable. Rational and safe use of injections can save many lives but unsafe practice threatens life. Safe injection practice is crucial in developing countries. Evidence based interventions, with honest commitment and participation from the service provider, recipient and community with aid of policy makers are required to ensure safe injection practice.

  11. Injectable silk-polyethylene glycol hydrogels.

    Science.gov (United States)

    Wang, Xiaoqin; Partlow, Benjamin; Liu, Jian; Zheng, Zhaozhu; Su, Bo; Wang, Yansong; Kaplan, David L

    2015-01-01

    Silk hydrogels for tissue repair are usually pre-formed via chemical or physical treatments from silk solutions. For many medical applications, it is desirable to utilize injectable silk hydrogels at high concentrations (>8%) to avoid surgical implantation and to achieve slow in vivo degradation of the gel. In the present study, injectable silk solutions that formed hydrogels in situ were generated by mixing silk with low-molecular-weight polyethylene glycol (PEG), especially PEG300 and 400 (molecular weight 300 and 400g mol(-1)). Gelation time was dependent on the concentration and molecular weight of PEG. When the concentration of PEG in the gel reached 40-45%, gelation time was less than 30min, as revealed by measurements of optical density and rheological studies, with kinetics of PEG400 faster than PEG300. Gelation was accompanied by structural changes in silk, leading to the conversion from random coil in solution to crystalline β-sheets in the gels, based on circular dichroism, attenuated total reflection Fourier transform infrared spectroscopy and X-ray diffraction. The modulus (127.5kPa) and yield strength (11.5kPa) determined were comparable to those of sonication-induced hydrogels at the same concentrations of silk. The time-dependent injectability of 15% PEG-silk hydrogel through 27G needles showed a gradual increase of compression forces from ∼10 to 50N within 60min. The growth of human mesenchymal stem cells on the PEG-silk hydrogels was hindered, likely due to the presence of PEG, which grew after a 5 day delay, presumably while the PEG solubilized away from the gel. When 5% PEG-silk hydrogel was subcutaneously injected in rats, significant degradation and tissue in-growth took place after 20 days, as revealed by ultrasound imaging and histological analysis. No significant inflammation around the gel was observed. The features of injectability, slow degradation and low initial cell attachment suggests that these PEG-silk hydrogels are of interest

  12. Beam shaping element for compact fiber injection systems

    Energy Technology Data Exchange (ETDEWEB)

    Weichman, L.S.; Dickey, F.M.; Shagam, R.N.

    2000-01-05

    Injection of high power, multi-mode laser profiles into a fiber optic delivery system requires controlling a number of injection parameters to maximize throughput and minimize concerns for optical damage both at the entrance and exit faces of the fiber optic. A simple method for simultaneously achieving a compact fiber injection geometry and control of these injection parameters, independent of the input source characteristics, is provided by a refractive lenslet array and simple injection lens configuration. Design criteria together with analytical and experimental results for the refractive lenslet array and short focal length injection lens are presented. This arrangement provides a uniform spatial intensity distribution at the fiber injection plane to a large degree independent of the source mode structure, spatial profile, divergence, size, and/or alignment to the injection system. This technique has application to a number of laser systems where uniform illumination of a target or remote delivery of high peak power is desired.

  13. Injection safety practices in a main referral hospital in northeastern ...

    African Journals Online (AJOL)

    2013-03-25

    Mar 25, 2013 ... phlebotomist in 27 units/wards of the hospital. The study instruments were ... Key words: Injection waste management, safe injections practices, tertiary health care facility ..... Table 4: Indicators reflecting risk to the provider at.

  14. Sciatic nerve palsy associated with intramuscular quinine injections ...

    African Journals Online (AJOL)

    Key Words: Sciatic nerve palsy, intramuscular injections, children, quinine dil~ ... adverse effects which include ototoxicity resulting .... quinine injection into the gluteal muscles of his right ... to maintain joint movement and avoid damage to.

  15. Investigation of potential injectable polymeric biomaterials for bone regeneration.

    Science.gov (United States)

    Dreifke, Michael B; Ebraheim, Nabil A; Jayasuriya, Ambalangodage C

    2013-08-01

    This article reviews the potential injectable polymeric biomaterial scaffolds currently being investigated for application in bone tissue regeneration. Two types of injectable biomaterial scaffolds are focused in this review, including injectable microspheres and injectable gels. The injectable microspheres section covers several polymeric materials, including poly(L-lactide-co-glycolide)-PLGA, poly(propylene fumarate), and chitosan. The injectable gel section covers alginate gels, hyaluronan hydrogels, poly(ethylene-glycol)-PEG hydrogels, and PEG-PLGA copolymer hydrogels. This review focuses on the effect of cellular behavior in vitro and in vivo in terms of material properties of polymers, such as biodegradation, biocompatibility, porosity, microsphere size, and cross-linking nature. Injectable polymeric biomaterials offer a major advantage for orthopedic applications by allowing the ability to use noninvasive or minimally invasive treatment methods. Therefore, combining injectable polymeric biomaterial scaffolds with cells have a significant potential to treat orthopedic bone defects, including spine fusion, and craniofacial and periodontal defects.

  16. Characteristics of pressure wave in common rail fuel injection system of high-speed direct injection diesel engines

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Herfatmanesh

    2016-05-01

    Full Text Available The latest generation of high-pressure common rail equipment now provides diesel engines possibility to apply as many as eight separate injection pulses within the engine cycle for reducing emissions and for smoothing combustion. With these complicated injection arrangements, optimizations of operating parameters for various driving conditions are considerably difficult, particularly when integrating fuel injection parameters with other operating parameters such as exhaust gas recirculation rate and boost pressure together for evaluating calibration results. Understanding the detailed effects of fuel injection parameters upon combustion characteristics and emission formation is therefore particularly critical. In this article, the results and discussion of experimental investigations on a high-speed direct injection light-duty diesel engine test bed are presented for evaluating and analyzing the effects of main adjustable parameters of the fuel injection system on all regulated emission gases and torque performance. Main injection timing, rail pressure, pilot amount, and particularly pilot timing have been examined. The results show that optimization of each of those adjustable parameters is beneficial for emission reduction and torque improvement under different operating conditions. By exploring the variation in the interval between the pilot injection and the main injection, it is found that the pressure wave in the common rail has a significant influence on the subsequent injection. This suggests that special attentions must be paid for adjusting pilot timing or any injection interval when multi-injection is used. With analyzing the fuel amount oscillation of the subsequent injections to pilot separation, it demonstrates that the frequency of regular oscillations of the actual fuel amount or the injection pulse width with the variation in pilot separation is always the same for a specified fuel injection system, regardless of engine speed

  17. Spatial distribution of soluble insulin in pig subcutaneous tissue: Effect of needle length, injection speed and injected volume.

    Science.gov (United States)

    Thomsen, Maria; Rasmussen, Christian Hove; Refsgaard, Hanne H F; Pedersen, Karen-Margrethe; Kirk, Rikke K; Poulsen, Mette; Feidenhans'l, Robert

    2015-11-15

    The spatial distribution of a soluble insulin formulation was visualized and quantified in 3-dimensions using X-ray computed tomography. The drug distribution was visualized for ex vivo injections in pig subcutaneous tissue. Pig subcutaneous tissue has very distinct layers, which could be separated in the tomographic reconstructions and the amount of drug in each tissue class was quantified. With a scan time of about 45min per sample, and a robust segmentation it was possible to analyze differences in the spatial drug distribution between several similar injections. It was studied how the drug distribution was effected by needle length, injection speed and injected volume. For an injected volume of 0.1ml and injection depth of 8mm about 50% of the injections were partly intramuscular. Using a 5mm needle resulted in purely subcutaneous injections with minor differences in the spatial drug distribution between injections. Increasing the injected volume from 0.1ml to 1ml did not increase the intramuscular volume fraction, but gave a significantly higher volume fraction placed in the fascia separating the deep and superficial subcutaneous fat layers. Varying the injection speed from 25l/s up to 300l/s gave no changes in the drug concentration distribution. The method presented gives novel insight into subcutaneous injections of soluble insulin drugs and can be used to optimize the injection technique for subcutaneous drug administration in preclinical studies of rodents. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Closed-Loop Control of Chemical Injection Rate for a Direct Nozzle Injection System

    Directory of Open Access Journals (Sweden)

    Xiang Cai

    2016-01-01

    Full Text Available To realize site-specific and variable-rate application of agricultural pesticides, accurately metering and controlling the chemical injection rate is necessary. This study presents a prototype of a direct nozzle injection system (DNIS by which chemical concentration transport lag was greatly reduced. In this system, a rapid-reacting solenoid valve (RRV was utilized for injecting chemicals, driven by a pulse-width modulation (PWM signal at 100 Hz, so with varying pulse width the chemical injection rate could be adjusted. Meanwhile, a closed-loop control strategy, proportional-integral-derivative (PID method, was applied for metering and stabilizing the chemical injection rate. In order to measure chemical flow rates and input them into the controller as a feedback in real-time, a thermodynamic flowmeter that was independent of chemical viscosity was used. Laboratory tests were conducted to assess the performance of DNIS and PID control strategy. Due to the nonlinear input–output characteristics of the RRV, a two-phase PID control process obtained better effects as compared with single PID control strategy. Test results also indicated that the set-point chemical flow rate could be achieved within less than 4 s, and the output stability was improved compared to the case without control strategy.

  19. REAL TIME FUEL INJECTION IN SI ENGINE USING ELECTRONIC INSTRUMENTATION

    Directory of Open Access Journals (Sweden)

    V. VINOTH KUMAR, M.E

    2012-05-01

    Full Text Available To meet the present stringent emission norms. These systems are enerally termed as Electronic Fuel Injection (EFI systems. The fuel is injected into the throttle body or into the inlet manifold through an electronic fuel injector, which is controlled by an Electronic Control Unit (ECU. The quantity of fuel injected by the injector plays a vital role as far as performance and emission characteristics of spark ignition engines are concerned. This paper deals with the static and dynamic fuel injection characteristics of two gasoline fuelinjectors. The effect of different injection parameters like fuel injection pressure, injection duration, supply voltage to injector and engine speed on the quantity of fuel injected have been studied for two injectors. The injection dead time and its variation with respect to fuel pressure and supply voltage to injector have beenanalyzed. Based on the analysis of results, an empirical formula has been obtained to determine the dynamic fuel injection quantity from the static fuel injection characteristics and it was compared with the measured values. It is found that the empirical formula developed in this work gives reasonably good results and therefore, it can be used with confidence for predicting the dynamic characteristics of any given injector from its static injection characteristics.

  20. CONTRIBUTIONS TO DESIGN CHANNELS INJECTION INTO MOULDES FOR FOOTWEAR

    Directory of Open Access Journals (Sweden)

    LUCA Cornelia

    2014-05-01

    Full Text Available Semi products used in the shoe manufacturing are mostly made through polymer blend injecting in moulds. The injection moulds are designed with one or more cavities. When the mould has only one cavity the injection is made straight in cavity through one canal or through one main canal and more auxiliary canals. In multiple cavity injection always uses the primary canal and more auxiliary canals. The cavities of the mould may be posted symmetrically or asymmetrically refer ring to the main canal. The correct dimensioning of the injection system determines the quality of the injected pieces and the productivity of the manufacturing process. In the same time, the injection parameters have a lot of values depending of the injected plastic mass. The aspects of the designing of the moulds for shoe manufacturing are complex. The paper presents some contributions in the designing of the injection systems of the mould cavities in shoe industry. It develops some aspects about the optimization of the principal and secondary injection canals placing confronted by the mould cavities, some aspects about the injection canals placing straight contactly with the mould cavities depending on the shape and the dimension of the cavities and some aspects about the dimensioning of the injection canals.

  1. Injection system of the minicyclotron accelerator mass spectrometer

    Institute of Scientific and Technical Information of China (English)

    LIUYonghao; LIDeming; 等

    1999-01-01

    The existing injection system of the SMCAMS(super-sensitive minicyclotron accelerator mass spectrometer)is described together with the discussion of its disadvantages exposed after having been operating for five years.which provides a basis for consideration of improvements to the injection system.An optimized injection system with an analytical magent added prior to the minicryclotron has been proposed and calculated.

  2. 21 CFR 522.1244 - Levamisole phosphate injection.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Levamisole phosphate injection. 522.1244 Section 522.1244 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS IMPLANTATION OR INJECTABLE DOSAGE FORM NEW ANIMAL DRUGS § 522.1244 Levamisole phosphate injection....

  3. Taylor-Couette flow with radial fluid injection

    Science.gov (United States)

    Wilkinson, Nikolas; Dutcher, Cari S.

    2017-08-01

    Taylor-Couette cells have been shown to improve a number of industrial processes due to the wide variety of hydrodynamic flow states accessible. Traditional designs, however, limit the ability to introduce new fluids into the annulus during device operation due to geometric confinement and complexity. In this paper, a co- and counter-rotating Taylor-Couette cell with radial fluid injection has been constructed. The incorporation of 16 ports in the inner cylinder enables radial fluid injection during rotation of both cylinders. The design is also capable of continuous axial flow, enabling large injection volumes. The new inner cylinder design does not modify the critical Re for flow instabilities and can precisely inject a desired mass at a desired flow rate. A range of injection rates and masses were explored to quantify the effect of radial injection on the stability of the turbulent Taylor vortex structure. Only the highest injection rate and total mass studied (5.9 g/s, 100 g) modified the turbulent Taylor vortex structure after injection for a sustained period. The post-injection vortices remained larger than the pre-injection vortices, whereas at lower injection rates or masses, the vortex structure quickly returned to the pre-injection structure. This new system allows for in situ study of hydrodynamic effects on fluid-fluid (gas and liquid) mixing and multiphase complexation, growth, and structure. We demonstrated this new design's potential for studying the flocculation of bentonite using cationic polyacrylamide for enhancing water treatment operations.

  4. Ceramic particle injection during laser treatment of Titanium

    NARCIS (Netherlands)

    Kloosterman, A.J.; de Hosson, J.T.M.; Aliabadi, MH; Brebbia, CA

    1997-01-01

    This paper concentrates on the laser particle injection process. Slight changes in the conditions of injection process, substantially influence the microstructure of the modified layer. TiC, TiN and SiC particles were injected into Ti-6Al-4V, which resulted in the formation of a metal matrix composi

  5. Ceramic particle injection during laser treatment of Titanium

    NARCIS (Netherlands)

    Kloosterman, A.J.; de Hosson, J.T.M.; Aliabadi, MH; Brebbia, CA

    1997-01-01

    This paper concentrates on the laser particle injection process. Slight changes in the conditions of injection process, substantially influence the microstructure of the modified layer. TiC, TiN and SiC particles were injected into Ti-6Al-4V, which resulted in the formation of a metal matrix

  6. Near-surface groundwater responses to injection of geothermal wastes

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, S.C.

    1984-06-01

    This report assesses the feasibility of injection as an alternative for geothermal wastewater disposal and analyzes hydrologic controls governing the upward migration of injected fluids. Injection experiences at several geothermal developments are presented including the following: Raft River Valley, Salton Sea, East Mesa, Otake, Hatchobaru, and Ahuachapan geothermal fields.

  7. 21 CFR 522.800 - Droperidol and fentanyl citrate injection.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Droperidol and fentanyl citrate injection. 522.800... § 522.800 Droperidol and fentanyl citrate injection. (a) Specifications. Droperidol and fentanyl citrate injection is a sterile solution containing 20 milligrams of droperidol and 0.4 milligram of fentanyl...

  8. Medical treatment of impotence with papaverine and phentolamine intracavernosal injection.

    OpenAIRE

    Dinsmore, W W

    1990-01-01

    Intracavernosal injection of papaverine and phentolamine was used in 20 patients with impotence. After six months 14 patients were still using the self-injection treatment. Two patients failed to respond and two patients developed priapism which responded to venesection and metaraminol injection.

  9. Unstable angina following intracavernous injection of alprostadil: a case study

    OpenAIRE

    Delongchamps, Nicolas Barry; Legrand, Guillaume; Zerbib, Marc; Peyromaure, Michael

    2009-01-01

    Intracavernous injection of alprostadil is the gold standard treatment for erectile dysfunction following radical prostatectomy. After surgery, low doses of alprostadil can be delivered for the sole purpose of penile rehabilitation. The only reported systemic side effects of such injections are arterial hypotension and headache. In the current report, a case of unstable angina immediately following an intracavernous injection of alprostadil is described.

  10. TREATMENT OF 40 CASES OF CHRONIC ECZEMA WITH POINT-INJECTION OF COMPOUND RADIX SALVIAE MILTIORRHIZAE INJECTION

    Institute of Scientific and Technical Information of China (English)

    郭志伟; 陈汉章

    2000-01-01

    The authors have used point-injection of compound Radix Salviae Miltiorrhizae Injection to treat 40 cases of chronic eczema and achieved a satisfactory therapeutic effect. The total effective rate was 95%.

  11. Evolution of Surface Texture and Cracks During Injection Molding of Fiber-Reinforced, Additively-Manufactured, Injection Molding Inserts

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Mischkot, Michael; Pedersen, David Bue

    2016-01-01

    This paper investigates the lifetime and surfacedeterioration of additively-manufactured, injection-moulding inserts. The inserts were produced using digital light processing and were reinforcedwith oriented short carbon fibers. Theinserts were used during injection molding oflow-density polyethy...

  12. Cascadable excitability in optically injected microdisks

    Science.gov (United States)

    Van Vaerenbergh, Thomas; Alexander, Koen; Fiers, Martin; Mechet, Pauline; Dambre, Joni; Bienstman, Peter

    2014-05-01

    All-optical spiking neural networks would allow high speed parallelized processing of time-encoded information, using the same energy efficient computational principles as our brain. As the neurons in these networks need to be able to process pulse trains, they should be excitable. Using simulations, we demonstrate Class 1 excitability in optically injected microdisk lasers, and propose a cascadable optical spiking neuron design. The neuron has a clear threshold and an integrating behavior. In addition, we show that the optical phase of the input pulses can be used to create inhibitory, as well as excitatory perturbations. Furthermore, we incorporate our optical neuron design in a topology that allows a disk to react on excitations from other disks. Phase tuning of the intermediate connections allows to control the disk response. Additionally, we investigate the sensitivity of the disk circuit to deviations in driving current and locking signal wavelength detuning. Using state-of-the-art fabrication techniques for microdisk laser, the standard deviation of the lasing wavelength is still about one order of magnitude too large. Finally, as the dynamical behavior of the microdisks is identical to the behavior in Semiconductor Ring Lasers (SRL), we compare the excitability mechanism due to optically injection with the previously proposed excitability due to asymmetry in the intermodal coupling in SRLs, as the latter mechanism can also be induced in disks due to, e.g., asymmetry in the external reaction. In both cases, the symmetry between the two counter-propagating modes of the cavity needs to be broken to prevent switching to the other mode, and allow the system to relax to its initial state after a perturbation. However, the asymmetry due to optical injection results in an integrating spiking neuron, whereas the asymmetry in the intermodal coupling is known to result in a resonating spiking neuron.

  13. Danggui Injection plus Vitamin B12 Injection at Acupoints for Hyperlipidemia

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-hui

    2005-01-01

    Danggui Injection and Vitamin B12 Injection were injected into acupoints Geshu (BL17), Pishu (BL 20), Zusanli (ST 36), Fenglong (ST 40) and Neiguan (PC 6) to treated 56 cases of hyperlipidemia. Meanwhile, Fenofibrate was adopted to treat another 45 cases as control. After2-month treatment, result showed similar effects in the two groups.%取膈俞、脾俞、足三里、丰隆和内关穴为主,注射当归注射液和维生素B12,治疗56例高血脂症患者,并与非诺贝特治疗45例相对照.治疗2个月后,两组疗效相近.

  14. A Review of the Effect of Injected Dextranomer/Hyaluronic Acid Copolymer Volume on Reflux Correction Following Endoscopic Injection

    Directory of Open Access Journals (Sweden)

    Sumit Dave

    2008-01-01

    Full Text Available The current literature suggests that multiple variables affect vesicoureteric reflux (VUR resolution rates following dextranomer/hyaluronic acid copolymer (Dx/HA injection. This article reviews the evidence pertaining to the effect of injected Dx/HA volume on success rates following endoscopic correction. Lack of prospective studies which use injected volume as a continuous variable coupled with a nonstandardized injection technique and endpoint hinders the ability to reach a definite conclusion.

  15. Forum for Injection Technique (FIT, India: The Indian recommendations 2.0, for best practice in Insulin Injection Technique, 2015

    Directory of Open Access Journals (Sweden)

    Nikhil Tandon

    2015-01-01

    Full Text Available As injectable therapies such as human insulin, insulin analogs, and glucagon-like peptide-1 receptor agonists are used to manage diabetes, correct injection technique is vital for the achievement of glycemic control. The forum for injection technique India acknowledged this need for the first time in India and worked to develop evidence-based recommendations on insulin injection technique, to assist healthcare practitioners in their clinical practice.

  16. Functional nanostructures on injection molded plastic

    DEFF Research Database (Denmark)

    Johansson, Alicia Charlotte; Søgaard, Emil; Andersen, Nis Korsgaard

    Nanotechnology can be used to make inexpensive plastic parts with functional surfaces. The plastic parts can be molded using a standard injection molding process. The nanostructures are directly transferred from the surface of the molding tool to the surface of the molded plastic part during...... the molding process. The main advantage with this method is that surface treatments and chemical additives are avoided, which minimizes health risks and simplifies recycling. Another advantage is that the unique technology enables nanostructuring of free form molded parts. The functional surfaces can have...

  17. Crystal Collimation with protons at injection energy

    CERN Document Server

    Rossi, Roberto; Masi, Alessandro; Mirarchi, Daniele; Montesano, Simone; Redaelli, Stefano; Valentino, Gianluca; Scandale, Walter; CERN. Geneva. ATS Department

    2015-01-01

    During this MD, performed on August 30th, 2015, bent silicon crystals were tested with protons beams for a possible usage of crystal-assisted collimation. Tests were performed at injection energy, using both horizontal and vertical crystals, providing a crucial test of the hardware for precise crystal angle adjustments (goniometers). Proton channeling was observed for the first time with LHC beams and the channeled beams were probed with scans performed with secondary collimators. Measurements of cleaning efficiency of a crystal-based collimation system were also performed.

  18. Screw Extruder for Pellet Injection System

    Directory of Open Access Journals (Sweden)

    Sharadkumar K. Chhantbar

    2014-05-01

    Full Text Available Solid hydrogenic pellets are used as fuel for fusion energy reactor. A technique for continuous production of solid hydrogen and its isotopes by a screw extruder is suggested for the production of an unlimited number of pellets. The idea was developed and patented by PELIN laboratories, Inc. (Canada. A Gifford McMahon cryocooler is used for the generation of solid hydrogenic fluid pellets. Requirements of the pellets is depends upon the energy to be produced by tokamak. This review paper focuses on the model for the screw extruder for solidification of hydrogen ice having high injection reliability.

  19. Injectable bioadhesive hydrogels with innate antibacterial properties

    Science.gov (United States)

    Giano, Michael C.; Ibrahim, Zuhaib; Medina, Scott H.; Sarhane, Karim A.; Christensen, Joani M.; Yamada, Yuji; Brandacher, Gerald; Schneider, Joel P.

    2014-06-01

    Surgical site infections cause significant postoperative morbidity and increased healthcare costs. Bioadhesives used to fill surgical voids and support wound healing are typically devoid of antibacterial activity. Here we report novel syringe-injectable bioadhesive hydrogels with inherent antibacterial properties prepared from mixing polydextran aldehyde and branched polyethylenimine. These adhesives kill both Gram-negative and Gram-positive bacteria, while sparing human erythrocytes. An optimal composition of 2.5 wt% oxidized dextran and 6.9 wt% polyethylenimine sets within seconds forming a mechanically rigid (~\

  20. Inverse spin Hall effect by spin injection

    Science.gov (United States)

    Liu, S. Y.; Horing, Norman J. M.; Lei, X. L.

    2007-09-01

    Motivated by a recent experiment [S. O. Valenzuela and M. Tinkham, Nature (London) 442, 176 (2006)], the authors present a quantitative microscopic theory to investigate the inverse spin-Hall effect with spin injection into aluminum considering both intrinsic and extrinsic spin-orbit couplings using the orthogonalized-plane-wave method. Their theoretical results are in good agreement with the experimental data. It is also clear that the magnitude of the anomalous Hall resistivity is mainly due to contributions from extrinsic skew scattering.

  1. SQL Injection Attacks: Techniques and Protection Mechanisms

    Directory of Open Access Journals (Sweden)

    Santosh Soni

    2011-01-01

    Full Text Available When an internet user interacts in web environment by surfing the Net, sending electronic mail messages and participating in online forums lot of data is generated which may have user’s private information. If this information is captured by third party tools and techniques; it may cause a breach in end user privacy. In the Web environment, end user privacy is one of the most controversial legal issues. In this paper issues related to information leakage through SQL injection attacks are presented and protection mechanisms are also discussed.

  2. Hardware Trojan by Hot Carrier Injection

    CERN Document Server

    Shiyanovskii, Y; Papachristou, C; Weyer, D; Clay, W

    2009-01-01

    This paper discusses how hot carrier injection (HCI) can be exploited to create a trojan that will cause hardware failures. The trojan is produced not via additional logic circuitry but by controlled scenarios that maximize and accelerate the HCI effect in transistors. These scenarios range from manipulating the manufacturing process to varying the internal voltage distribution. This new type of trojan is difficult to test due to its gradual hardware degradation mechanism. This paper describes the HCI effect, detection techniques and discusses the possibility for maliciously induced HCI trojans.

  3. [Development of a novel liquid injection system].

    Science.gov (United States)

    Chen, Kai; Lv, Yong-Gui

    2009-11-01

    A liquid jet injector employs compressed gas or spring to produce a high-velocity stream to deliver liquid drug into human body through skin. There are many clinical jet injection products available, none of which is domestic. A new liquid jet injector is designed based on a comprehensive analysis of the current products. The injector consists of an ejector, trigger and a re-positioning mechanism. The jets characteristics of sample injector are tested, and the results show that the maximum exit pressure is above 15 MPa, a threshold value for penetrating into the skin.

  4. Injectible bodily prosthetics employing methacrylic copolymer gels

    Science.gov (United States)

    Mallapragada, Surya K.; Anderson, Brian C.

    2007-02-27

    The present invention provides novel block copolymers as structural supplements for injectible bodily prosthetics employed in medical or cosmetic procedures. The invention also includes the use of such block copolymers as nucleus pulposus replacement materials for the treatment of degenerative disc disorders and spinal injuries. The copolymers are constructed by polymerization of a tertiary amine methacrylate with either a (poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) polymer, such as the commercially available Pluronic.RTM. polymers, or a poly(ethylene glycol) methyl ether polymer.

  5. Injection drug use, unsafe medical injections, and HIV in Africa: a systematic review

    Directory of Open Access Journals (Sweden)

    Reid Savanna R

    2009-08-01

    Full Text Available Abstract The reuse of injecting equipment in clinical settings is well documented in Africa and appears to play a substantial role in generalized HIV epidemics. The U.S. and the WHO have begun to support large scale injection safety interventions, increased professional education and training programs, and the development and wider dissemination of infection control guidelines. Several African governments have also taken steps to control injecting equipment, including banning syringes that can be reused. However injection drug use (IDU, of heroin and stimulants, is a growing risk factor for acquiring HIV in the region. IDU is increasingly common among young adults in sub-Saharan Africa and is associated with high risk sex, thus linking IDU to the already well established and concentrated generalized HIV epidemics in the region. Demand reduction programs based on effective substance use education and drug treatment services are very limited, and imprisonment is more common than access to drug treatment services. Drug policies are still very punitive and there is widespread misunderstanding of and hostility to harm reduction programs e.g. needle exchange programs are almost non-existent in the region. Among injection drug users and among drug treatment patients in Africa, knowledge that needle sharing and syringe reuse transmit HIV is still very limited, in contrast with the more successfully instilled knowledge that HIV is transmitted sexually. These new injection risks will take on increased epidemiological significance over the coming decade and will require much more attention by African nations to the range of effective harm reduction tools now available in Europe, Asia, and North America.

  6. Injecting risk behavior among traveling young injection drug users: travel partner and city characteristics.

    Science.gov (United States)

    Montgomery, Martha E; Fatch, Robin S; Evans, Jennifer L; Yu, Michelle; Davidson, Peter J; Page, Kimberly; Hahn, Judith A

    2013-06-01

    Young injection drug users (IDUs), a highly mobile population, engage in high levels of injecting risk behavior, yet little is understood about how such risk behavior may vary by the characteristics of the cities to which they travel, including the existence of a syringe exchange program (SEP), as well as travel partner characteristics. In 2004-2005, we conducted a 6-month prospective study to investigate the risk behavior of 89 young IDUs as they traveled, with detailed information gathered about 350 city visits. In multivariable analyses, travel to larger urban cities with a population of 500,000-1,000,000 was significantly associated with injecting drugs (adjusted odds ratio (AOR) = 3.71; 95 % confidence interval (CI), 1.56-8.82), ancillary equipment sharing (AES; AOR = 7.05; 95 % CI, 2.25-22.06) and receptive needle sharing (RNS; AOR = 5.73; 95 % CI, 1.11-27.95), as compared with visits to smaller cities with populations below 50,000. Region of the country, and the existence of a SEP within the city visited, were not independently associated with injecting drugs, AES, or RNS during city visits. Traveling with more than one injecting partner was associated with injecting drugs during city visits (AOR = 2.77; 95 % CI, 1.46-5.27), when compared with traveling alone. Additionally, both non-daily and daily/almost daily alcohol use during city visits were associated with AES (AOR = 3.37; 95 % CI, 1.42-7.68; AOR = 3.03; 95 % CI, 1.32-6.97, respectively) as compared with no alcohol consumption. Traveling young IDUs are more likely to inject when traveling with other IDUs and to engage in higher risk injection behavior when they are in large cities. Risk behavior occurring in city visits, including equipment sharing and alcohol consumption, suggests further need for focused interventions to reduce risk for viral infection among this population.

  7. Aperture and Delivery Precision of the LHC Injection System

    CERN Document Server

    Goddard, B; Jeanneret, J B; Kain, V; Lamont, M; Maire, V; Mertens, V; Wenninger, J

    2004-01-01

    The main LHC injection elements in interaction regions 2 and 8 comprise the injection septa (MSI), the injection kickers (MKI), together with three families of passive protection devices (TDI, TCDD and TCLI). The apertures of the two circulating beams are detailed for these elements, together with a summary of recent design modifications. The errors in the SPS, the transfer lines and the injection system are analysed, and the expected performance of the system derived, in terms of the expected delivery precision of the injected beam.

  8. A study of steam injection in fractured media

    Energy Technology Data Exchange (ETDEWEB)

    Dindoruk, M.D.S.; Aziz, K.; Brigham, W.; Castanier, L.

    1996-02-01

    Steam injection is the most widely used thermal recovery technique for unfractured reservoirs containing heavy oil. There have been numerous studies on theoretical and experimental aspects of steam injection for such systems. Fractured reservoirs contain a large fraction of the world supply of oil, and field tests indicate that steam injection is feasible for such reservoirs. Unfortunately there has been little laboratory work done on steam injection in such systems. The experimental system in this work was designed to understand the mechanisms involved in the transfer of fluids and heat between matrix rocks and fractures under steam injection.

  9. On Modules Whose Singular Subgenerated Modules Are Weakly Injective

    Institute of Scientific and Technical Information of China (English)

    S. Dhompongsa; J. Sanwong; S.Plubtieng; H.Tansee

    2001-01-01

    Rings over which every singular right module is injective (briefly,right SI-rings) were introduced and investigated by Goodearl. Weakly injective modules, as a generalization of injective modules, were introduced by Jain and modules are weakly injective, which we call SwI-rings. This concept is extended to SwI-modules, i.e., modules whose singular subgenerated modules are weakly injective. Several characterizations and properties of SwI-rings and SwI-modules are obtained which generalize some earlier known results on SI-rings and weakly semisimple rings.

  10. Quasi-stable injection channels in a wakefield accelerator

    Science.gov (United States)

    Wiltshire-Turkay, Mara; Farmer, John P.; Pukhov, Alexander

    2016-05-01

    The influence of initial position on the acceleration of externally injected electrons in a plasma wakefield is investigated. Test-particle simulations show previously unobserved complex structure in the parameter space, with quasi-stable injection channels forming for particles injected in narrow regions away from the wake centre. Particles injected into these channels remain in the wake for a considerable time after dephasing and as a result achieve significantly higher energy than their neighbours. The result is relevant to both the planning and optimisation of experiments making use of external injection.

  11. Turbulent boundary layer on perforated surfaces with vector injection

    Science.gov (United States)

    Eroshenko, V. M.; Zaichik, L. I.; Klimov, A. A.; Ianovskii, L. S.; Kondratev, V. I.

    1980-10-01

    The paper presents an experimental investigation of a turbulent boundary layer on perforated plates with uniform vector injection at various angles to gas flow. It was shown that with strong injection at angles oriented in the flow direction the intensity of turbulent pulsation is decreased, while injection at angles in the opposite direction increase the intensity. A relationship was established between the critical parameters of the boundary layer injection angles; it was concluded that the asymptotic theory of Kutateladze and Leontiev can be used for determining the coefficient of friction of vector injection.

  12. Backfire prediction in a manifold injection hydrogen internal combustion engine

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xing-hua; Liu, Fu-shui; Zhou, Lei; Sun, Bai-gang [School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081 (China); Schock, Harold J. [Engine Research Laboratory, Michigan State University, East Lansing, MI (United States)

    2008-07-15

    Hydrogen internal combustion engine (H2ICE) easily occur inlet manifold backfire and other abnormal combustion phenomena because of the low ignition energy, wide flammability range and rapid combustion speed of hydrogen. In this paper, the effect of injection timing on mixture formation in a manifold injection H2ICE was studied in various engine speed and equivalence ratio by CFD simulation. It was concluded that H2ICE of manifold injection have an limited injection end timing in order to prevent backfire in the inlet manifold. Finally, the limit of injection end timing of the H2ICE was proposed and validated by engine experiment. (author)

  13. Translating the research in insulin injection technique: implications for practice.

    Science.gov (United States)

    Saltiel-Berzin, Rita; Cypress, Marjorie; Gibney, Michael

    2012-01-01

    Glucose variability leading to suboptimal glycemic control is common among people using injection therapies. Advanced technology and new studies have identified important issues related to injection technique: needle length and gauge, body mass index, skin and subcutaneous tissue thickness, adequate resuspension of cloudy insulins, leakage, choice of injection site and rotation, pinching a skinfold, and lipohypertrophy. All these issues can affect pain and bruising, insulin absorption, and blood glucose levels. The purpose of this article is to review current and past research regarding insulin injection therapy and to provide practical, translational information regarding injection technique, teaching/learning techniques specific to insulin administration, and implications for diabetes self-management education and support. International injection recommendations for patients with diabetes have recently been published and have identified specific recommendations for health care professionals. This article provides an evidence-based translational and practical review of the research regarding injection technique and teaching/learning theory. Diabetes educators need to reevaluate how they provide instruction for the administration of insulin and other injectable medications. Research regarding skin and subcutaneous thickness reveals that shorter needles may be appropriate for the majority of patients regardless of body mass index. Periodic reassessment of injection technique, including suspension of cloudy insulins and inspection of injection sites for lipohypertrophy, is a critical aspect of the role of the diabetes educator. An injection checklist is provided as a guide for diabetes educators.

  14. Lightning Pin Injection Testing on MOSFETS

    Science.gov (United States)

    Ely, Jay J.; Nguyen, Truong X.; Szatkowski, George N.; Koppen, Sandra V.; Mielnik, John J.; Vaughan, Roger K.; Wysocki, Philip F.; Celaya, Jose R.; Saha, Sankalita

    2009-01-01

    Lightning transients were pin-injected into metal-oxide-semiconductor field-effect transistors (MOSFETs) to induce fault modes. This report documents the test process and results, and provides a basis for subsequent lightning tests. MOSFETs may be present in DC-DC power supplies and electromechanical actuator circuits that may be used on board aircraft. Results show that unprotected MOSFET Gates are susceptible to failure, even when installed in systems in well-shielded and partial-shielded locations. MOSFET Drains and Sources are significantly less susceptible. Device impedance decreased (current increased) after every failure. Such a failure mode may lead to cascading failures, as the damaged MOSFET may allow excessive current to flow through other circuitry. Preliminary assessments on a MOSFET subjected to 20-stroke pin-injection testing demonstrate that Breakdown Voltage, Leakage Current and Threshold Voltage characteristics show damage, while the device continues to meet manufacturer performance specifications. The purpose of this research is to develop validated tools, technologies, and techniques for automated detection, diagnosis and prognosis that enable mitigation of adverse events during flight, such as from lightning transients; and to understand the interplay between lightning-induced surges and aging (i.e. humidity, vibration thermal stress, etc.) on component degradation.

  15. Immobilized Bioluminescent Reagents in Flow Injection Analysis.

    Science.gov (United States)

    Nabi, Abdul

    Available from UMI in association with The British Library. Bioluminescent reactions exhibits two important characteristics from an analytical viewpoint; they are selective and highly sensitive. Furthermore, bioluminescent emissions are easily measured with a simple flow-through detector based on a photomultiplier tube and the rapid and reproducible mixing of sample and expensive reagent is best achieved by a flow injection manifold. The two most important bioluminescent systems are the enzyme (luciferase)/substrate (luciferin) combinations extracted from fireflies (Photinus pyralis) and marine bacteria (Virio harveyi) which requires ATP and NAD(P)H respectively as cofactors. Reactions that generate or consume these cofactors can also be coupled to the bioluminescent reaction to provide assays for a wide range of clinically important species. A flow injection manifold for the study of bioluminescent reactions is described, as are procedures for the extraction, purification and immobilization of firefly and bacterial luciferase and oxidoreductase. Results are presented for the determination of ATP using firefly system and the determination of other enzymes and substrates participating in ATP-converting reactions e.g. creatine kinase, ATP-sulphurylase, pyruvate kinase, creatine phosphate, pyrophosphate and phophoenolypyruvate. Similarly results are presented for the determination of NAD(P)H, FMN, FMNH_2 and several dehydrogenases which produce NAD(P)H and their substrates, e.g. alcohol, L-lactate, L-malate, L-glutamate, Glucose-6-phosphate and primary bile acid.

  16. Exserohilum Infections Associated with Contaminated Steroid Injections

    Science.gov (United States)

    Ritter, Jana M.; Muehlenbachs, Atis; Blau, Dianna M.; Paddock, Christopher D.; Shieh, Wun-Ju; Drew, Clifton P.; Batten, Brigid C.; Bartlett, Jeanine H.; Metcalfe, Maureen G.; Pham, Cau D.; Lockhart, Shawn R.; Patel, Mitesh; Liu, Lindy; Jones, Tara L.; Greer, Patricia W.; Montague, Jeltley L.; White, Elizabeth; Rollin, Dominique C.; Seales, Cynthia; Stewart, Donna; Deming, Mark V.; Brandt, Mary E.; Zaki, Sherif R.

    2014-01-01

    September 2012 marked the beginning of the largest reported outbreak of infections associated with epidural and intra-articular injections. Contamination of methylprednisolone acetate with the black mold, Exserohilum rostratum, was the primary cause of the outbreak, with >13,000 persons exposed to the potentially contaminated drug, 741 confirmed drug-related infections, and 55 deaths. Fatal meningitis and localized epidural, paraspinal, and peripheral joint infections occurred. Tissues from 40 laboratory-confirmed cases representing these various clinical entities were evaluated by histopathological analysis, special stains, and IHC to characterize the pathological features and investigate the pathogenesis of infection, and to evaluate methods for detection of Exserohilum in formalin-fixed, paraffin-embedded (FFPE) tissues. Fatal cases had necrosuppurative to granulomatous meningitis and vasculitis, with thrombi and abundant angioinvasive fungi, with extensive involvement of the basilar arterial circulation of the brain. IHC was a highly sensitive method for detection of fungus in FFPE tissues, demonstrating both hyphal forms and granular fungal antigens, and PCR identified Exserohilum in FFPE and fresh tissues. Our findings suggest a pathogenesis for meningitis involving fungal penetration into the cerebrospinal fluid at the injection site, with transport through cerebrospinal fluid to the basal cisterns and subsequent invasion of the basilar arteries. Further studies are needed to characterize Exserohilum and investigate the potential effects of underlying host factors and steroid administration on the pathogenesis of infection. PMID:23809916

  17. Formulation of an injectable phosphocalcium cement

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, S. [CIRIMAT Equipe de Physico-Chimie des Phosphates ENSCT INP, Toulouse (France); TEKNIMED, Vic en Bigorre (France); Brouchet, A.; Delisle, B. [CHU Rangueil, Toulouse (France). Service d' Anatomie Pathologie; Freche, M.; Lacout, J.L. [CIRIMAT Equipe de Physico-Chimie des Phosphates ENSCT INP, Toulouse (France); Rodriguez, F. [Lab. de Galenique, Chmin des Maraichers, Toulouse (France)

    2001-07-01

    In orthopedic surgery, the loss or the reinforcement of osseous substance often requires filling of the defective part. In order to make the surgical operations easier we sought to make an injectable form. This study examined the effect of silicone and polyglycol on the injectability, setting time and mechanical properties of the cement. The basic solid phase was composed of a mixture of tetracalcium phosphate (Ca{sub 4}(PO{sub 4}){sub 2}O), {alpha}-tricalcium phosphate (Ca{sub 3}(PO{sub 4}){sub 2}) and sodium glycerophosphate. The basic liquid phase was made up of lime, orthophosphoric acid and water. Silicone was previously dissolved in cyclohexane and introduced in the solid phase. Polyglycol is a water-soluble compound so it is introduced in the liquid phase. For the mechanical properties, the strong increase in the percentage of additives decreased the compressive strength. Silicone and polyglycol made it possible to improve viscosity without modifying the basic setting time. The rate of evolution was different with the two different additives. From the data it was possible to optimize the formulation of cements to give predicted properties. Testing the in vivo implantation of the cement has already started. Preliminary results show the perfect osteointegration of the new cements without reactions to the foreign body in spite of the presence of silicone. (orig.)

  18. Design considerations for partial neutralization acid injection

    Energy Technology Data Exchange (ETDEWEB)

    Perl, T.R.; Van der Cook, R.E.

    1977-01-01

    It is currently estimated that, after vacuum evaporator-crystallizer of Hanford liquid wastes on the order of 10 million gallons of caustic residual liquor will remain. Partial Neutralization, the continuous addition of nitric acid to the slurry is being developed to allow additional volume reduction and reduce interim storage costs. Tests revealed that acid and liquor compositions as well as nozzle design are significant factors in the concentration of NO/sub x/ in the mild steel vessel vent system. The available literature information relating to mixing of up to 20 gallons per minute of acid with 14,000 gallons per minute of slurry is presented. Very rapid and thorough mixing of the injected acid is required, since reaction of even 0.1 percent of the injected acid with sodium nitrite in the slurry would yield unacceptable levels of NO/sub x/ in the vessel vent system. The mixing time calculated by a method developed herein was used to evaluate the proposed conceptual mixing nozzle.

  19. Plantar fascia rupture associated with corticosteroid injection.

    Science.gov (United States)

    Sellman, J R

    1994-07-01

    A series of 37 patients, all with a presumptive diagnosis of plantar fascia rupture, is presented. All had had prior heel pain diagnosed as plantar fasciitis, and all had been treated with corticosteroid injection into the calcaneal origin of the fascia. One third described a sudden tearing episode in the heel, while the rest had a gradual change in symptoms. Most of the patients had relief of the original heel pain, which had been replaced by a variety of new foot problems, including dorsal and lateral midfoot pain, swelling, foot weakness, metatarsal pain, and metatarsal fracture. In all 37 patients, there was a palpable diminution in the tension of the plantar fascia on the involved side, and footprints often showed a flattening of the involved arch. Magnetic resonance imaging done on one patient showed attenuation of the plantar fascia. From these observations and data, the author concluded that plantar fascia rupture had occurred. Treatment following rupture included supportive shoes, orthoses, and time. The majority had resolution of their new symptoms, but this often took 6 to 12 months to occur. In the remainder, there were persisting symptoms. Corticosteroid injections, although helpful in the treatment of plantar fasciitis, appear to predispose to plantar fascia rupture.

  20. Intraprostatic injection of neutralized zinc in rats

    Energy Technology Data Exchange (ETDEWEB)

    Fahim, M.S.; Wang, M.; Sutcu, M.F.; Fahim, Z.; Safron, J.A.; Ganjam, V.K. (Univ. of Missouri, Columbia (United States) Xian Medical University (China))

    1991-03-11

    Zinc has been implicated in steroid endocrinology of the prostate gland. The conversion of testosterone to dihydrotestosterone (DHT) by 5{alpha}-reductase enzyme is believed to express androgenic responses in the prostate. To note the effect of neutralized zinc on the prostate, 50 sexually mature rats, weighing 325 {plus minus} 20 grams, were divided into 5 groups as follows: (1) control, (2) sham, (3) castrated, (4) injected intraprostatically with 10 mg. neutralized zinc, and (5) injected intraprostatically with 20 mg. neutralized zinc. Results in the treated groups indicated significant reduction of prostate weights, 12% and 53% and histologically normal prostate; no significant change in weight and histological structure of testes, epididymides, and seminal vesicles; significant reduction in 5{alpha}-reductase activity and total protein and DNA concentrations in prostate tissue; and no significant effect on progeny of treated animals. These results suggest that direct application of neutralized zinc to the prostate offers a new modality for treatment of prostatitis without affecting spermatogenesis and testosterone production.

  1. Upgrade of the LHC Injection Kicker Magnets

    CERN Document Server

    Barnes, M J; Baglin, V; Bregliozzi, G; Caspers, F; Calatroni, S; Day, H; Ducimetière, L; Garlaschè, M; Gomes Namora, V; Jimenez, J M; Magnin, N; Mertens, V; Métral, E; Salvant, B; Taborelli, M; Uythoven, J; Weterings, W

    2013-01-01

    Two LHC injection kicker systems, each comprising 4 magnets per ring, produce a kick of 1.3 T·m with a rise-time of less than 900 ns and a flattop ripple of less than ±0.5%. A beam screen is placed in the aperture of each magnet, to provide a path for the image current of the LHC beam and screen the ferrite yoke against wake fields. The screen consists of a ceramic tube with conductors in the inner wall. The initially implemented beam screen ensured a low rate of electrical breakdowns and an adequately low beam coupling impedance. Operation with increasingly higher intensity beams, stable for many hours at a time, has resulted in substantial heating of the ferrite yoke, sometimes requiring cool-down over several hours before the LHC can be refilled. During the long shutdown in 2013/2014 all eight kicker magnets will be upgraded with an improved beam screen and an increased emissivity of the vacuum tank. In addition equipment adjacent to the injection kickers and various vacuum components will be modified to...

  2. Fractal phenomena in powder injection molding process

    Institute of Scientific and Technical Information of China (English)

    郑洲顺; 曲选辉; 李云平; 雷长明; 段柏华

    2003-01-01

    The complicated characteristics of the powder were studied by fractal theory. It is illustrated that powder shape, binder structure, feedstock and mold-filling flow in powder injection molding process possess obvious fractal characteristics. Based on the result of SEM, the fractal dimensions of the projected boundary of carbonylic iron and carbonylic nickel particles were determined to be 1.074±0.006 and 1.230±0.005 respectively by box counting measurement. The results show that the fractal dimension of the projected boundary of carbonylic iron particles is close to smooth curve of one-dimension, while the fractal dimension of the projected boundary of carbonylic nickel particle is close to that of trisection Koch curve, indicating that the shape characteristics of carbonylic nickel particles can be described and analyzed by the characteristics of trisection Koch curve. It is also proposed that the fractal theory can be applied in the research of powder injection molding in four aspects.

  3. Injection molding of micro patterned PMMA plate

    Institute of Scientific and Technical Information of China (English)

    Yeong-Eun YOO; Tae-Hoon KIM; Tae-Jin JE; Doo-Sun CHOI; Chang-Wan KIM; Sun-Kyung KIM

    2011-01-01

    A plastic plate with surface micro features was injection molded to investigate the effect of pressure rise of melt on the replication of the micro structures. Prism pattern, which is used in many optical applications, was selected as a model pattern. The prism pattern is 50 μm in pitch and 108° in the vertical angle. The overall size of the plate was 335 mm×213 mm and the thickness of the plate varied linearly from 2.6 mm to 0.7 mm. The prism pattern was firstly machined on the nickel plated core block using micro diamond tool and this machined pattern core was installed in a mold for injection molding of prism patterned plate. Polymethyl methacrylate (PMMA) was used as a molding material. The pressure and temperature of the melt in the cavity were measured at different positions in the cavity and the replication of the pattern was also measured at the same positions. The results show that the pressure or temperature profile through the process depends on the shape and the size of the plate. The replication is affected by the temperature and pressure profiles at the early stage of filling, which is right after the melt reaches the position to be measured.

  4. Solubilizing excipients in oral and injectable formulations.

    Science.gov (United States)

    Strickley, Robert G

    2004-02-01

    A review of commercially available oral and injectable solution formulations reveals that the solubilizing excipients include water-soluble organic solvents (polyethylene glycol 300, polyethylene glycol 400, ethanol, propylene glycol, glycerin, N-methyl-2-pyrrolidone, dimethylacetamide, and dimethylsulfoxide), non-ionic surfactants (Cremophor EL, Cremophor RH 40, Cremophor RH 60, d-alpha-tocopherol polyethylene glycol 1000 succinate, polysorbate 20, polysorbate 80, Solutol HS 15, sorbitan monooleate, poloxamer 407, Labrafil M-1944CS, Labrafil M-2125CS, Labrasol, Gellucire 44/14, Softigen 767, and mono- and di-fatty acid esters of PEG 300, 400, or 1750), water-insoluble lipids (castor oil, corn oil, cottonseed oil, olive oil, peanut oil, peppermint oil, safflower oil, sesame oil, soybean oil, hydrogenated vegetable oils, hydrogenated soybean oil, and medium-chain triglycerides of coconut oil and palm seed oil), organic liquids/semi-solids (beeswax, d-alpha-tocopherol, oleic acid, medium-chain mono- and diglycerides), various cyclodextrins (alpha-cyclodextrin, beta-cyclodextrin, hydroxypropyl-beta-cyclodextrin, and sulfobutylether-beta-cyclodextrin), and phospholipids (hydrogenated soy phosphatidylcholine, distearoylphosphatidylglycerol, L-alpha-dimyristoylphosphatidylcholine, L-alpha-dimyristoylphosphatidylglycerol). The chemical techniques to solubilize water-insoluble drugs for oral and injection administration include pH adjustment, cosolvents, complexation, microemulsions, self-emulsifying drug delivery systems, micelles, liposomes, and emulsions.

  5. Energy Injections in Gamma Ray Bursts

    Science.gov (United States)

    Yu, Y. B.; Wu, X. F.; Huang, Y. F.; Xu, M.

    2016-06-01

    In this study, we will introduce some special events, such as GRBs 081029, 100814A and 111209A. Unexpected features, such as multiple X-ray flares and significant optical rebrightenings, are observed in their afterglow light curves, unveiling the late-time activities of the central engines. Here, we will summarize our previous numerical results of these three bursts by using the energy injection model. Especially, we will focus on GRB 100814A, with an early-time shallow decay phase and a late-time significant rebrightening in its optical afterglow light curve. To explain the complex multi-band afterglow emission of GRB 100814A, we invoke a magnetar with spin evolution as its central engine. We argue that the optical shallow decay phase and the X-ray plateau are due to energy injection from t he magnetar in its early spin-down stage, while the significant optical rebrightening observed at late time naturally comes from the spin-up process of the magnetar, which is caused by subsequent fall back accretion.

  6. Supersonic Jet Excitation using Flapping Injection

    CERN Document Server

    Hafsteinsson, Haukur; Andersson, Niklas; Cuppoletti, Daniel; Gutmark, Ephraim; Prisell, Erik

    2013-01-01

    Supersonic jet noise reduction is important for high speed military aircraft. Lower acoustic levels would reduce structural fatigue leading to longer lifetime of the jet aircraft. It is not solely structural aspects which are of importance, health issues of the pilot and the airfield per- sonnel are also very important, as high acoustic levels may result in severe hearing damage. It remains a major challenge to reduce the overall noise levels of the aircraft, where the supersonic exhaust is the main noise source for near ground operation. Fluidic injection into the supersonic jet at the nozzle exhaust has been shown as a promising method for noise reduction. It has been shown to speed up the mix- ing process of the main jet, hence reducing the kinetic energy level of the jet and the power of the total acoustic radiation. Furthermore, the interaction mechanism between the fluidic injection and the shock structure in the jet exhaust plays a crucial role in the total noise radia- tion. In this study, LES is used...

  7. Spin injection into high temperature superconductor

    CERN Document Server

    Severac, C H L

    2000-01-01

    DELTA M versus pulse length was measured. It showed two regions: above 100 mu s DELTA M is the same for both magnetic and non-magnetic material and can be attributed to heating. Below 100 mu s, DELTA M is only significant for the CMR samples. This is attributed to the injection of highly spin polarised carriers that are believed to reduce the order parameter over the whole sample, and hence l sub C and the magnetic moment of the sample. As part of a search for colossal magneto-resistance (CMR) materials with Curie temperature below the superconducting transition of YBCO, we made an investigation of the magnetic and electrical characteristics of Chromium doped LCMO. We found that the conduction mechanism which depends on the orbital order via the double-exchange mechanism, is decoupled from the ferromagnetic behaviour, which is related to spin order. Work on the injection of dc-current from half metallic CMR material into YBa sub 2 Cu sub 3 O sub 7 sub - subdelta (YBCO) showed a shift and a compression in the ...

  8. Subconjunctival Bevacizumab Injection in Treatment of Pterygium

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Besharati

    2011-03-01

    Full Text Available This study determined the clinical effect of subconjunctival administration of bevacizumab in patients with primary and recurrent pterygium. The study was an off-label, single-dosing, interventional case series involving 22 patients with primary and recurrent pterygium. They received subconjunctival bevacizumab (0.2cc. Pterygium vascularity and thickness was graded. The size of the pterygium (measured by surface area in cm2 was recorded from baseline to 12 weeks, after injection. Treatment-related complications and adverse events were reported. The main outcome of measurements was the change in size, vascularity, thickness, color intensity. There were 15 males (68.2% and 7 females (31.8% of 22 patients with a mean age of 45.5 years (SD 11.68 years. One cases didn't cooperate, and excluded. There was a significant difference in the mean surface area of pterygium at different intervals (P 0.05. There was a significant reduction in the mean pterygium size of patients younger than 45 years in comparison to those older than 45 years after three month (P =0.037, but after 6 months, this difference was not significant (P = 0.338. Average changes in pterygium size for both eyes were not different. The reduction of color intensity in both eyes was significant (P =0.031. Subconjuctival bevacizumab injection is useful in management of patients with primary and recurrent pterygium without significant local or systemic adverse effects

  9. Compact toroid injection into C-2U

    Science.gov (United States)

    Roche, Thomas; Gota, H.; Garate, E.; Asai, T.; Matsumoto, T.; Sekiguchi, J.; Putvinski, S.; Allfrey, I.; Beall, M.; Cordero, M.; Granstedt, E.; Kinley, J.; Morehouse, M.; Sheftman, D.; Valentine, T.; Waggoner, W.; the TAE Team

    2015-11-01

    Sustainment of an advanced neutral beam-driven FRC for a period in excess of 5 ms is the primary goal of the C-2U machine at Tri Alpha Energy. In addition, a criteria for long-term global sustainment of any magnetically confined fusion reactor is particle refueling. To this end, a magnetized coaxial plasma-gun has been developed. Compact toroids (CT) are to be injected perpendicular to the axial magnetic field of C-2U. To simulate this environment, an experimental test-stand has been constructed. A transverse magnetic field of B ~ 1 kG is established (comparable to the C-2U axial field) and CTs are fired across it. As a minimal requirement, the CT must have energy density greater than that of the magnetic field it is to penetrate, i.e., 1/2 ρv2 >=B2 / 2μ0 . This criteria is easily met and indeed the CTs traverse the test-stand field. A preliminary experiment on C-2U shows the CT also capable of penetrating into FRC plasmas and refueling is observed resulting in a 20 - 30% increase in total particle number per single-pulsed CT injection. Results from test-stand and C-2U experiments will be presented.

  10. Endoscopic botox injections in therapy of refractorygastroparesis

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Gastroparesis (GP) is a common disease seen in gastroenterologypractice particularly in western countries,and it may be underdiagnosed. The available drugtherapies for this condition are quite disappointing.Botulinum toxin type A (BT) has been found to be effectivetherapy in various spastic disorders of smoothmuscle of gastrointestinal tract. However, the benefitsof BT injections in GP have been unclear. Severalretrospective and open label studies have shown clinicaladvantages of intrapyloric Botulinum toxin type Ainjections, while two small randomized trials did notshow positive results. Therefore, the available publishedstudies yielded conflicting results leading to fading outof botox therapy for GP. We recognize possible clinicalbenefit of BT injections without any disadvantages of thistreatment.We are calling for revisiting the endoscopyguided botox therapy in refractory GP. In this reviewwe discuss important features of these studies pointingout differences in results among them. Differences inpatient selection, doses and method of administrationof botox toxin in the prior studies may be the cause ofconflicting results. The mechanism of action, indications,efficacy and side-effects of BT are reviewed. Finally, werecognize limited evidence to recommend BT in GP andcalling attention for future research in this field since noadvances in drug management had been made in thelast two decades.

  11. The physics of plasma injection events. [during magnetospheric substorms

    Science.gov (United States)

    Kivelson, M. G.; Kaye, S. M.; Southwood, D. J.

    1980-01-01

    In this paper, plasma injection is defined as an increase of particle flux in a detector of finite bandwidth. Injection can result from dynamic processes or from spacecraft penetration of a quasi-static spatial structure produced by a steady magnetospheric convection pattern. ATS-5 particle spectrograms are found to provide examples of plasma injection events of both sorts. Dynamic injection occurs both with and without local magnetic signatures. For events not associated with clear local magnetic signatures, convection theory with a steady or a time-varying uniform electric field can account for the energy dispersion of injected particles with energy less than 50 keV. The paper concludes with a discussion of the way in which the convection boundaries are related to the substorm injection boundary of Mauk and McIlwain. Several alternative expressions for the local time and K(p) dependence of the injection boundary are given.

  12. Injection system of teh SSC Medium Energy Booster

    Energy Technology Data Exchange (ETDEWEB)

    Mao, N.; Gerig, R.; McGill, J.; Brown, K.

    1994-04-01

    The Medium Energy Booster (MEB) is the third of the SSCL accelerators and the largest of the resistive magnet synchrotrons. It accelerates protons from an injection momentum of 12 GeV/c to a top momentum of 200 GeV/c. A beam injection system has been designed to inject the beam transferred from the Low Energy Booster onto the MEB closed orbit in the MEB injection insertion region. The beam is injected via a vertical bending Lambertson septum magnet and a horizontal kicker with appropriate matching and very little beam loss and emittance dilution. The beam optics of the injection system is described in this paper. The required parameters of the Lambertson septum magnet and the injection kicker are given.

  13. Incidence of plantar fascia ruptures following corticosteroid injection.

    Science.gov (United States)

    Kim, Chul; Cashdollar, Michael R; Mendicino, Robert W; Catanzariti, Alan R; Fuge, LaDonna

    2010-12-01

    Plantar fasciitis is commonly treated with corticosteroid injections to decrease pain and inflammation. Therapeutic benefits often vary in terms of efficacy and duration. Rupture of the plantar fascia has been reported as a possible complication following corticosteroid injection. A retrospective chart review of 120 patients who received corticosteroid injection for plantar fasciitis was performed at the authors' institution to determine the incidence of plantar fascia rupture. The plantar fascia rupture was diagnosed clinically and confirmed with magnetic resonance imaging. Various factors were analyzed, including the number of injections, interval between injections, body mass index (BMI), and activity level. Four patients (2.4%) consequently experienced plantar fascia rupture following an average of 2.67 injections. The average BMI of these patients was 38.6 kg/m². The authors conclude that corticosteroid injection therapy appears to be a safe and effective form of nonoperative treatment with minimal complications and a relatively low incident of plantar fascia rupture.

  14. CFD Investigation into Diesel PCCI Combustion with Optimized Fuel Injection

    Directory of Open Access Journals (Sweden)

    Lipeng Lu

    2011-03-01

    Full Text Available A multi-pulse injection strategy for premixed charge compression ignition (PCCI combustion was investigated in a four-valve, direct-injection diesel engine by a computational fluid dynamics (CFD simulation using KIVA-3V code coupled with detailed chemistry. The effects of fuel splitting proportion, injection timing, spray angles, and injection velocity were examined. The mixing process and formation of soot and nitrogen oxide (NOx emissions were investigated as the focus of the research. The results show that the fuel splitting proportion and the injection timing impacted the combustion and emissions significantly due to the considerable changes of the mixing process and fuel distribution in the cylinder. While the spray, inclusion angle and injection velocity at the injector exit, can be adjusted to improve mixing, combustion and emissions, appropriate injection timing and fuel splitting proportion must be jointly considered for optimum combustion performance.

  15. Autologous growth factor injections in chronic tendinopathy.

    Science.gov (United States)

    Sandrey, Michelle A

    2014-01-01

    de Vos RJ, van Veldhoven PLJ, Moen MH, Weir A, Tol JL. Autologous growth factor injections in chronic tendinopathy: a systematic review. Br Med Bull. 2010;95:63-77. The authors of this systematic review evaluated the literature to critically consider the effects of growth factors delivered through autologous whole-blood and platelet-rich-plasma (PRP) injections in managing wrist-flexor and -extensor tendinopathies, plantar fasciopathy, and patellar tendinopathy. The primary question was, according to the published literature, is there sufficient evidence to support the use of growth factors delivered through autologous whole-blood and PRP injections for chronic tendinopathy? The authors performed a comprehensive, systematic literature search in October 2009 using PubMed, MEDLINE, EMBASE, CINAHL, and the Cochrane library without time limits. The following key words were used in different combinations: tendinopathy, tendinosis, tendinitis, tendons, tennis elbow, plantar fasciitis, platelet rich plasma, platelet transfusion, and autologous blood or injection. The search was limited to human studies in English. All bibliographies from the initial literature search were also viewed to identify additional relevant studies. Studies were eligible based on the following criteria: (1) Articles were suitable (inclusion criteria) if the participants had been clinically diagnosed as having chronic tendinopathy; (2) the design had to be a prospective clinical study, randomized controlled trial, nonrandomized clinical trial, or prospective case series; (3) a well-described intervention in the form of a growth factor injection with either PRP or autologous whole blood was used; and (4) the outcome was reported in terms of pain or function (or both). All titles and abstracts were assessed by 2 researchers, and all relevant articles were obtained. Two researchers independently read the full text of each article to determine if it met the inclusion criteria. If opinions differed on

  16. HIGH SPEED INJECTION MOLDING OF HIGH DENSITY POLYETHYLENE - EFFECTS OF INJECTION SPEED ON STRUCTURE AND PROPERTIES

    Institute of Scientific and Technical Information of China (English)

    Kun Jiang; Feng Chen; Qiang Fu; Fei-long Yu; Run Su; Jing-hui Yang; Tian-nan Zhou; Jian Gao; Hua Deng; Ke Wang; Qin Zhang

    2011-01-01

    Thin wall samples of high density polyethylene (HDPE) were prepared via injection molding with differentinjection speeds ranging from 100 mm/s to 1200 mm/s. A significant decrease in the tensile strength and Young's moduluswas observed with increasing injection speed. In order to investigate the mechanism behind this decrease, the orientation,molecular weight, molecular weight distribution, melt flow rate, crystallinity and crystal morphology of HDPE werecharacterized using two-dimensional wide-angle X-ray diffraction (2D-WAXD), gel permeation chromatography (GPC),capillary rheometry and differential scanning calorimetry (DSC), respectively. It is demonstrated that the orientation,molecular weight, molecular weight distribution, melt flow rate and crystallinity have no obvious change with increasinginjection speed. Nevertheless, the content of extended chain crystals or large folded chain crystals was found to decreasewith increasing injection speed. Therefore, it is concluded that the decrease in tensile properties is mainly contributed by the reduced content of extended chain crystals or large folded chain crystals. This study provides industry with valuableinformation for the application of high speed injection molding.

  17. Risk of hepatitis C virus infection among young adult injection drug users who share injection equipment.

    Science.gov (United States)

    Thorpe, Lorna E; Ouellet, Lawrence J; Hershow, Ronald; Bailey, Susan L; Williams, Ian T; Williamson, John; Monterroso, Edgar R; Garfein, Richard S

    2002-04-01

    Designing studies to examine hepatitis C virus (HCV) transmission via the shared use of drug injection paraphernalia other than syringes is difficult because of saturation levels of HCV infection in most samples of injection drug users (IDUs). The authors measured the incidence of HCV infection in a large cohort of young IDUs from Chicago, Illinois, and determined the risk of HCV seroconversion associated with specific forms of sharing injection paraphernalia. From 1997 to 1999, serum samples obtained from 702 IDUs aged 18-30 years were screened for HCV antibodies; prevalence was 27%. Seronegative participants were tested for HCV antibodies at baseline, at 6 months, and at 12 months. During 290 person-years of follow-up, 29 participants seroconverted (incidence: 10.0/100 person-years). The adjusted relative hazard of seroconversion, controlling for demographic and drug-use covariates, was highest for sharing "cookers" (relative hazard = 4.1, 95% confidence interval: 1.4, 11.8), followed by sharing cotton filters (relative hazard = 2.4, 95% confidence interval: 1.1, 5.0). Risks associated with syringe-sharing and sharing of rinse water were elevated but not significant. After adjustment for syringe-sharing, sharing cookers remained the strongest predictor of seroconversion (relative hazard = 3.5, 95% confidence interval: 1.3, 9.9). The authors conclude that sharing of injection equipment other than syringes may be an important cause of HCV transmission between IDUs.

  18. 78 FR 23246 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2013-04-18

    ... Avenue, Dallas, Texas 75202-2733. FOR FURTHER INFORMATION CONTACT: Philip Dellinger, Chief Ground Water... Exemption--Class I Hazardous Waste Injection; BASF Corporation Freeport, Texas AGENCY: Environmental... 1984 Hazardous and Solid Waste ] Amendments to the Resource Conservation and Recovery Act, has been...

  19. 76 FR 42125 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2011-07-18

    ... Protection Division, Source Water Protection Branch (6WQ-S), 1445 Ross Avenue, Dallas, Texas 75202- 2733. FOR... Waste Amendments to the Resource Conservation and Recovery Act, has been granted to ConocoPhillips Company for one Class I injection well located at Borger, Texas. The company has adequately demonstrated...

  20. 76 FR 36129 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

    Science.gov (United States)

    2011-06-21

    ..., Texas 75202- 2733. FOR FURTHER INFORMATION CONTACT: Philip Dellinger, Chief Ground Water/ UIC Section... Solid Waste Amendments to the Resource Conservation and Recovery Act, has been granted to ExxonMobil Environmental Services Company for two Class I injection wells located at Pasadena, Texas. The company has...

  1. Policing behaviors, safe injection self-efficacy, and intervening on injection risks: Moderated mediation results from a randomized trial.

    Science.gov (United States)

    Pitpitan, Eileen V; Patterson, Thomas L; Abramovitz, Daniela; Vera, Alicia; Martinez, Gustavo; Staines, Hugo; Strathdee, Steffanie A

    2016-01-01

    We aim to use conditional or moderated mediation to simultaneously test how and for whom an injection risk intervention was efficacious at reducing receptive needle sharing among female sex workers who inject drugs (FSWs-IDUs) in Mexico. Secondary analysis of data from a randomized trial. A total of 300 FSW-IDUs participated in Mujer Mas Segura in Ciudad Juarez, Mexico, and were randomized to an interactive injection risk intervention or a didactic injection risk intervention. We measured safe injection self-efficacy as the hypothesized mediator and policing behaviors (being arrested and syringe confiscation) as hypothesized moderators. In total, 213 women provided complete data for the current analyses. Conditional (moderated) mediation showed that the intervention affected receptive needle sharing through safe injection self-efficacy among women who experienced syringe confiscation. On average, police syringe confiscation was associated with lower safe injection self-efficacy (p = .04). Among those who experienced syringe confiscation, those who received the interactive (vs. didactic) intervention reported higher self-efficacy, which in turn predicted lower receptive needle sharing (p = .04). Whereas syringe confiscation by the police negatively affected safe injection self-efficacy and ultimately injection risk behavior, our interactive intervention helped to "buffer" this negative impact of police behavior on risky injection practices. The theory-based, active skills building elements included in the interactive condition, which were absent from the didactic condition, helped participants' self-efficacy for safer injection in the face of syringe confiscation. (c) 2015 APA, all rights reserved).

  2. Development of devices for self-injection: using tribological analysis to optimize injection force

    Directory of Open Access Journals (Sweden)

    Lange J

    2016-05-01

    Full Text Available Jakob Lange, Leos Urbanek, Stefan BurrenYpsomed Delivery Systems, Ypsomed AG, Burgdorf, Switzerland Abstract: This article describes the use of analytical models and physical measurements to characterize and optimize the tribological behavior of pen injectors for self-administration of biopharmaceuticals. One of the main performance attributes of this kind of device is its efficiency in transmitting the external force applied by the user on to the cartridge inside the pen in order to effectuate an injection. This injection force characteristic is heavily influenced by the frictional properties of the polymeric materials employed in the mechanism. Standard friction tests are available for characterizing candidate materials, but they use geometries and conditions far removed from the actual situation inside a pen injector and thus do not always generate relevant data. A new test procedure, allowing the direct measurement of the coefficient of friction between two key parts of a pen injector mechanism using real parts under simulated use conditions, is presented. In addition to the absolute level of friction, the test method provides information on expected evolution of friction over lifetime as well as on expected consistency between individual devices. Paired with an analytical model of the pen mechanism, the frictional data allow the expected overall injection system force efficiency to be estimated. The test method and analytical model are applied to a range of polymer combinations with different kinds of lubrication. It is found that material combinations used without lubrication generally have unsatisfactory performance, that the use of silicone-based internal lubricating additives improves performance, and that the best results can be achieved with external silicone-based lubricants. Polytetrafluoroethylene-based internal lubrication and external lubrication are also evaluated but found to provide only limited benefits unless used in

  3. Evaluation of CT after combined injection method by intra and para-variceal injection

    Energy Technology Data Exchange (ETDEWEB)

    Urita, Yoshihisa; Ishihara, Manabu; Ozaki, Motonobu; Hachiya, Akihiko; Yamada, Shuuichi; Mutoh, Masue; Nakata, Masayuki; Ohtsuka, Sachio; Machida, Keiichi (Toho Univ., Tokyo (Japan). School of Medicine)

    1992-07-01

    The purpose of this study is to clarify the distribution of sclerosant injected into the paravariceal esophageal wall. CT scan of the chest was performed 30 minutes after combined injection sclerotherapy (EIS) using 1% Polidocanol (Aethoxysklerol: AS) in 23 patients with esophageal varices. CT findings included (1) ring-enhanced esophageal wall (2) ring-enhanced paraesophageal wall (3) locally enhanced esophageal wall (4) beltlike-enhanced parietal pleura. Types (1) (2) (4) were obtained in the 1st or the 2nd EIS, and type (3) was obtained in the 3rd EIS or more. These CT findings did not correlate with total volume of injected sclerosant. Seven of 8 patients with CT finding of Type (3) had esophageal ulcer. (We consider that esophageal ulcer is necessary to fibrosis of the lower eshophageal wall). When CT finding of type (3) was obtained, we put off the next procedure of EIS. Pleural effusion occured after 2 of 18 procedures with CT finding of type (1), 2 of 9 with type (2), 0 of 8 with type (3), and 1 of 14 with type (4). We speculated that most of patients with type (4) would have pleural effusion. But CT findings did not correlate with pleural effusion. Chest pain occurred after 1 of 18 procedures with CT finding of type (1), 1 of 9 with type (2), 2 of 8 with type (3), and 1 of 14 with type (4). Fever occurred after 0 of 18 procedures with CT findings of type (1), 0 of 9 with type (2), 2 of 8 with type (3), 0 of 14 with type (4). These results suggest that 1% AS injected into paravariceal esophageal wall have no reference to the minor complications. The sclerosants injected into the paravaries was thought to diffuse rapidly, but it is unlikely that this distribution of 1% AS is the main factor of pleural effusion, chest pain, and fever after EIS. (author).

  4. Tracing Injection Fluids in Engineered Geothermal Systems

    Science.gov (United States)

    Rose, P. E.; Leecaster, K.; Mella, M.; Ayling, B.; Bartl, M. H.

    2011-12-01

    The reinjection of produced fluids is crucial to the effective management of geothermal reservoirs, since it provides a mechanism for maintaining reservoir pressures while allowing for the disposal of a toxic byproduct. Tracers are essential to the proper location of injection wells since they are the only known tool for reliably characterizing the flow patterns of recirculated fluids. If injection wells are placed too close to production wells, then reinjected fluids do not have sufficient residence time to extract heat from the reservoir and premature thermal breakthrough results. If injection wells are placed too far away, then the reservoir risks unacceptable pressure loss. Several thermally stable compounds from a family of very detectable fluorescent organic compounds (the naphthalene sulfonates) were characterized and found to be effective for use as geothermal tracers. Through batch-autoclave reactions, their Arrhenius pseudo-first-order decay-rate constants were determined. An analytical method was developed that allows for the laboratory determination of concentrations in the low parts-per-trillion range. Field experiments in numerous geothermal reservoirs throughout the world have confirmed the laboratory findings. Whereas conservative tracers such as the naphthalene sulfonates are effective tools for indicating interwell flow patterns and for measuring reservoir pore volumes, 'reactive' tracers can be used to constrain fracture surface area, which is the effective area for heat extraction. This is especially important for engineered geothermal system (EGS) wells, since reactive tracers can be used to measure fracture surface area immediately after drilling and while the well stimulation equipment is still on site. The reactive properties of these tracers that can be exploited to constrain fracture surface area are reversible sorption, contrasting diffusivity, and thermal decay. Laboratory batch- and flow-reactor experiments in combination with numerical

  5. Effects of injection angle and pressure on mixing performance of fuel injection via various geometries for upstream-fuel-injected scramjets

    Science.gov (United States)

    Ogawa, Hideaki

    2016-11-01

    Effective fuel injection and mixing is of crucial importance for reliable operation of scramjet engines, where fuel must be injected into high-speed crossflow and mixed with air at an extremely short timescale. This paper presents the results of a numerical study that investigates the effects of the injection angle and pressure for various orifice shapes on fuel mixing characteristics into hypersonic airflow at Mach 5, aiming at the application to scramjet operation with upstream fuel injection at Mach 10. The mixing performance has been evaluated with respect to the mixing efficiency, total pressure recovery, fuel penetration, and streamwise circulation. Significant influence of the injection angle and intensity on the mixing has been observed in conjunction with the geometric features of the injector orifice. An additional performance parameter, namely the mixing vorticity effectiveness, has been found to be an effective measure to quantify the contribution of the streamwise vorticity in mixing enhancement.

  6. Effects of Alcohol Injection in Rat Sciatic Nerve

    Science.gov (United States)

    Mazoch, Mathew J.; Cheema, Gulraiz A.; Suva, Larry J.; Thomas, Ruth L.

    2015-01-01

    Background Previous studies have shown that the injection of dehydrated alcohol has been successful for the treatment of Morton's neuroma in the foot. In this study, we determined the cellular effect of injection of alcohol into and around the sciatic nerve of rats, and measured the extent of cell necrosis and/or any associated histologic or inflammatory changes. Methods Twenty-two male (~375g) Wistar rats were randomized into two groups each receiving alcohol injections into or around the sciatic nerve after nerve exposure under sterile technique. Group 1 rats were injected with a 0.5ml solution of 0.5% Marcaine in the left sciatic nerve as a control group. In the right sciatic nerve a 0.5ml solution of 4% ethanol with 0.5% Marcaine was injected. Group 2 rats received 0.5ml of 20%ethanol with 0.5% Marcaine injected into the left sciatic nerve and 0.5 ml of 30% ethanol with 0.5% Marcaine injected into the right sciatic nerve. In each group, the rats were placed in 3 subgroups: intraneural, perineural, perimuscular injections. All rats were sacrificed and tissue harvested for histologic evaluation at day 10 post injection. Results No evidence of alcohol-associated cell necrosis, apoptosis or apparent inflammation was observed in histologic specimens of any injected nerves, perineural tissue, or muscles in controls or experimental groups regardless of concentration of ethanol injected on day 10. Conclusion We concluded that alcohol injection (≤30% ethanol) into and/or around the sciatic nerve or the adjacent muscle of rats has no histologic evidence of necrosis or inflammation to the nerve or surrounding tissue. There was no observable histological change in apoptosis, or cell number, in response to the alcohol injection. PMID:25097192

  7. Modelling and monitoring in injection molding

    DEFF Research Database (Denmark)

    Thyregod, Peter

    2001-01-01

    -conforning unit is only expected very rarely during sampling, a moving sum chart and a CUSUM chart are equivalent. Finally, the correlation structure of 21 process variables has been studied prior to monitoring the process. Is is illustrated how the process can be analysed with multivariate techniques......This thesis is concerned with the application of statistical methods in quality improvement of injection molded parts. The methods described are illustrated with data from the manufacturing of parts for a medical device. The emphasis has been on the variation between cavities in multi-cavity molds...... taken within the same machine set-point did not cause great variation compared to the two preceding sources of variation. A simple graphical approach is suggested for finding patterns in the cavity differences. Applying this method to data from a 16 cavity mold, a clear connection was found between...

  8. Controlled delivery of antibodies from injectable hydrogels.

    Science.gov (United States)

    Fletcher, Nathan A; Babcock, Lyndsey R; Murray, Ellen A; Krebs, Melissa D

    2016-02-01

    Therapeutic antibodies are currently used for the treatment of various diseases, but large doses delivered systemically are typically required. Localized controlled delivery techniques would afford major benefits such as decreasing side effects and required doses. Injectable biopolymer systems are an attractive solution due to their minimally invasive potential for controlled release in a localized area. Here, alginate-chitosan hydrogels are demonstrated to provide controlled delivery of IgG model antibodies and also of Fab antibody fragments. Also, an alternate delivery system comprised of poly(lactic-co-glycolic acid) (PLGA) microspheres loaded with antibodies and encapsulated in alginate was shown to successfully provide another level of control over release. These biopolymer systems that offer controlled delivery for antibodies and antibody fragments will be promising for many applications in drug delivery and regenerative medicine.

  9. Determination of ribavirin by flow injection chemiluminescence

    Institute of Scientific and Technical Information of China (English)

    Juqing Jin; Yuhai Tang; Langchong He; Hong Yao; Yuanyuan Sun

    2006-01-01

    Objective: To establish a rapid and precise continuous flow-injection chemiluminescence (CL) method to determine ribavirin. Methods: The ribavirin could restrain strongly CL reaction of luminol in sodium hydroxide (NaOH) solution with potassium chlorate(KClO3). The different experimental parameters affecting the CL intensity were studied carefully. Results:Under optimum conditions(The concentrations of luminol,KClO3, and NaOH were at 0.1 mmol/L,0.5 μmol/L,and 0.2 mol/L, respectively), the linear range of the working curves was 0.01-7.00 μg/ml with a detection limit of 0.004 μg/ml. Conclusion: The method is simple, rapid and sensitive, and successfully applied to the determination of ribavirin in pharmaceutical preparations and biological fluids.

  10. Inadvertent intrathecal injection of tranexamic acid

    Directory of Open Access Journals (Sweden)

    Olfa Kaabachi

    2011-01-01

    Full Text Available Some factors have been identified as contributing to medical errors such as labels, appearance, and location of ampules. In this case report, inadvertent intrathecal injection of 80 mg tranexamic acid was followed by severe pain in the back and the gluteal region, myoclonus on lower extremities and agitation. General anesthesia was induced to complete surgery. At the end of anesthesia, patient developed polymyoclonus and seizures needing supportive care of the hemodynamic, and respiratory systems. He developed ventricular tachycardia treated with Cordarone infusion. The patient′s condition progressively improved to full recovery 2 days after. Confusion between hyperbaric bupivacaine and tranexamic acid was due to similarities in appearance between both ampules.

  11. [Micro-insemination with intracytoplasmic sperm injection].

    Science.gov (United States)

    Andersen, A G; Ziebe, S; Andersen, A N

    1996-11-18

    Intracytoplasmic sperm injection (ICSI) is now established in the treatment of infertility. Fertilization is achieved by microinjection of a single spermatozoon into the ooplasma. Oligoasthenoteratozoospermia is the main indication, but ICSI is also used in cases of failed fertilization after standard IVF, retrograde ejaculation and male immunological infertility. In obstructive azoospermia ICSI is performed after aspiration of epididymal or testicular spermatozoa. In some anejaculatoric men spermatozon can be obtained following penile vibration or electro-stimulation, but they often have poor motility and ICSI may be used for fertilization. ICSI may also be used after thawing of semen cryopreserved prior to treatment of a malignant disease. Since 1991 the ICSI technique has been improved, and today the pregnancy rates are at least as good as after standard IVF. So far, studies of the foetuses and children born after ICSI show that the number of malformations and abnormal karyotypes is within the range of the normal population.

  12. Teflon injections in post-prostatectomy incontinence

    DEFF Research Database (Denmark)

    Osther, P J; Røhl, H F

    1988-01-01

    Twenty-five males with post-prostatectomy incontinence due to sphincter damage underwent transperineal or transurethral Teflon injections. The results were classified into three grades: good, moderate, and poor. Good or moderate results were obtained in 24%. No major immediate complications...... or longterm side-effects were observed. This intervention is associated with a minimum of discomfort for the patient and hospitalization can be limited to 48-72 hours. The results are not so good as those obtained in female incontinence, and the procedure cannot be recommended as first choice treatment...... in patients with post-prostatectomy incontinence, but because of the simplicity of the procedure, it is considered to be a valuable alternative in patients not suitable for prosthetic surgery....

  13. Restoring broken entanglement by injecting separable correlations

    CERN Document Server

    Pirandola, Stefano

    2012-01-01

    The distribution of entanglement is central in many protocols of quantum information and computation. However it is also known to be a very fragile process when loss and noise come into play. The inevitable interaction of the quantum systems with the external environment induces effects of decoherence which may be so strong to destroy any input entanglement, a phenomenon known as "entanglement breaking". Here we study this catastrophic process in a correlated-noise environment showing how the presence of classical-type correlations can restore the distribution of entanglement. In particular, we consider a Gaussian environment whose thermal noise is strong enough to break the entanglement of two bosonic modes of the electromagnetic field. In this scenario, we show that the injection of separable correlations from the same environment is able to reactivate the broken entanglement. This paradoxical effect happens both in schemes of direct distribution, where a third party (Charlie) broadcasts entangled states to...

  14. A note on the injection distance

    DEFF Research Database (Denmark)

    Bulygin, Stanislav; Geil, Hans Olav; Ruano Benito, Diego

    2009-01-01

    . Recently, Silva and Kschischang introduced in [D. Silva and F.R. Kschischang, "On Metrics for Error Correction in Network Coding," To appear in IEEE Trans. Inform. Theory, ArXiv: 0805.3824v4[cs.IT], 2009] the injection distance to give a detailed picture of what happens in noncoherent network coding. We......Koetter and Kschischang showed in [R. Koetter and F.R. Kschischang, "Coding for Errors and Erasures in Random Network Coding," IEEE Trans. Inform. Theory, {54(8), 2008] that the network coding counterpart of Gabidulin codes performs asymptotically optimal with respect to the subspace distance...... show that the above codes are also asymptotically optimal with respect to this distance....

  15. Electroosmotic flow and injection: application to conductimetry.

    Science.gov (United States)

    Tang, L; Huber, C O

    1994-10-01

    Electroosmotic solution propulsion and sample injection using fused silica tube was investigated. Capillary tube dimensions were 50-100 microm i.d. by 4-7 cm length with a break in the capillary wall near one end through which electrolytic contact with the capillary solution was established. The applied field was typically 150 V/cm. The voltage at the break in the column was monitored by potentiometry with a bridge configuration. Concentrations ranging from 10 microM to 100 mM were accommodated. The basis for high sensitivity, e.g. 70 mV/microM, together with low cell volume, e.g. 20 nl, was established. Tap water conductivity measurements were made using CaCl(2) reference solution.

  16. Water treatment processes for oilfield steam injection

    Energy Technology Data Exchange (ETDEWEB)

    Shannon, A.; Pauley, J.C. [Chevron Canada Ltd., Vancouver, BC (Canada)

    2009-07-01

    Various water treatment processes are used within the oilfield industry. Processes tend to be common within one region of the world, but different between regions due to untreated water characteristics and treated water quality requirements. This paper summarized Chevron's view of water treatment requirements and processes for oilfield steam injection. It identified water treatment systems that have been used at thermal projects, where they are most commonly utilized, their purpose, and the limits of each process. The advantages and disadvantages of different water treatment systems were also reviewed. The paper focused on the treatment of fresh waters, low-TDS produced waters, high-hardness waters, and high-silica produced waters. Challenges and opportunities were also identified. It was concluded that the challenges created by high-silica, or by high-hardness produced waters lead to more costly processes. 25 refs., 5 tabs., 4 figs.

  17. Magnetic energy injection in GRB 080913

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    GRB 080913,with a spectroscopically determined redshift of z=6.7,was the record holder for being the most remote stellar object before the discovery of the recent gamma-ray burst GRB 090423,whose redshift is about 8.2.The gradually accumulated high redshift GRB sample has shed light on the origin and physical properties of GRBs during the cosmic re-ionization epoch.Here,we present a detailed numerical fit to the multi-wavelength data of the optical afterglow of GRB 080913 and then constrain its circumburst environment and the other model parameters.We conclude that the late optical/X-ray plateau at about one day since the burst is due to the Poynting-flux dominated injection from the central engine which is very likely a massive spinning black hole with super strong magnetic fields.

  18. Injected nanocrystals for targeted drug delivery

    Directory of Open Access Journals (Sweden)

    Yi Lu

    2016-03-01

    Full Text Available Nanocrystals are pure drug crystals with sizes in the nanometer range. Due to the advantages of high drug loading, platform stability, and ease of scaling-up, nanocrystals have been widely used to deliver poorly water-soluble drugs. Nanocrystals in the blood stream can be recognized and sequestered as exogenous materials by mononuclear phagocytic system (MPS cells, leading to passive accumulation in MPS-rich organs, such as liver, spleen and lung. Particle size, morphology and surface modification affect the biodistribution of nanocrystals. Ligand conjugation and stimuli-responsive polymers can also be used to target nanocrystals to specific pathogenic sites. In this review, the progress on injected nanocrystals for targeted drug delivery is discussed following a brief introduction to nanocrystal preparation methods, i.e., top-down and bottom-up technologies.

  19. Coping with earthquakes induced by fluid injection

    Science.gov (United States)

    McGarr, Arthur F.; Bekins, Barbara; Burkardt, Nina; Dewey, James W.; Earle, Paul S.; Ellsworth, William L.; Ge, Shemin; Hickman, Stephen H.; Holland, Austin F.; Majer, Ernest; Rubinstein, Justin L.; Sheehan, Anne

    2015-01-01

    Large areas of the United States long considered geologically stable with little or no detected seismicity have recently become seismically active. The increase in earthquake activity began in the mid-continent starting in 2001 (1) and has continued to rise. In 2014, the rate of occurrence of earthquakes with magnitudes (M) of 3 and greater in Oklahoma exceeded that in California (see the figure). This elevated activity includes larger earthquakes, several with M > 5, that have caused significant damage (2, 3). To a large extent, the increasing rate of earthquakes in the mid-continent is due to fluid-injection activities used in modern energy production (1, 4, 5). We explore potential avenues for mitigating effects of induced seismicity. Although the United States is our focus here, Canada, China, the UK, and others confront similar problems associated with oil and gas production, whereas quakes induced by geothermal activities affect Switzerland, Germany, and others.

  20. Tritium pellet injection sequences for TFTR

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, W.A.; Milora, S.L.; Attenberger, S.E.; Singer, C.E.; Schmidt, G.L.

    1983-01-01

    Tritium pellet injection into neutral deuterium, beam heated deuterium plasmas in the Tokamak Fusion Test Reactor (TFTR) is shown to be an attractive means of (1) minimizing tritium use per tritium discharge and over a sequence of tritium discharges; (2) greatly reducing the tritium load in the walls, limiters, getters, and cryopanels; (3) maintaining or improving instantaneous neutron production (Q); (4) reducing or eliminating deuterium-tritium (D-T) neutron production in non-optimized discharges; and (5) generally adding flexibility to the experimental sequences leading to optimal Q operation. Transport analyses of both compression and full-bore TFTR plasmas are used to support the above observations and to provide the basis for a proposed eight-pellet gas gun injector for the 1986 tritium experiments.

  1. Understanding fertilization through intracytoplasmic sperm injection (ICSI)

    Science.gov (United States)

    Neri, Queenie V.; Lee, Bora; Rosenwaks, Zev; Machaca, Khaled; Palermo, Gianpiero D.

    2014-01-01

    Summary Since the establishment of in vitro fertilization, it became evident that almost half of the couples failed to achieve fertilization and this phenomenon was attributed to a male gamete dysfunction. The adoption of assisted fertilization techniques particularly ICSI has been able to alleviate male factor infertility by granting the consistent ability of a viable spermatozoon to activate an oocyte. Single sperm injection, by pinpointing the beginning of fertilization, has been an invaluable tool in clarifying the different aspects of early fertilization and syngamy. However, even with ICSI some couples fail to fertilize due to ooplasmic dysmaturity in relation to the achieved nuclear maturation marked by the extrusion of the first polar body. More uncommon are cases where the spermatozoa partially or completely lack the specific oocyte activating factor. In this work, we review the most relevant aspects of fertilization and its failure through assisted reproductive technologies. Attempts at diagnosing and treating clinical fertilization failure are described. PMID:24290744

  2. Parallel Impurity Spreading During Massive Gas Injection

    Science.gov (United States)

    Izzo, V. A.

    2016-10-01

    Extended-MHD simulations of disruption mitigation in DIII-D demonstrate that both pre-existing islands (locked-modes) and plasma rotation can significantly influence toroidal spreading of impurities following massive gas injection (MGI). Given the importance of successful disruption mitigation in ITER and the large disparity in device parameters, empirical demonstrations of disruption mitigation strategies in present tokamaks are insufficient to inspire unreserved confidence for ITER. Here, MHD simulations elucidate how impurities injected as a localized jet spread toroidally and poloidally. Simulations with large pre-existing islands at the q = 2 surface reveal that the magnetic topology strongly influences the rate of impurity spreading parallel to the field lines. Parallel spreading is largely driven by rapid parallel heat conduction, and is much faster at low order rational surfaces, where a short parallel connection length leads to faster thermal equilibration. Consequently, the presence of large islands, which alter the connection length, can slow impurity transport; but the simulations also show that the appearance of a 4/2 harmonic of the 2/1 mode, which breaks up the large islands, can increase the rate of spreading. This effect is seen both for simulations with spontaneously growing and directly imposed 4/2 modes. Given the prevalence of locked-modes as a cause of disruptions, understanding the effect of large islands is of particular importance. Simulations with and without islands also show that rotation can alter impurity spreading, even reversing the predominant direction of spreading, which is toward the high-field-side in the absence of rotation. Given expected differences in rotation for ITER vs. DIII-D, rotation effects are another important consideration when extrapolating experimental results. Work supported by US DOE under DE-FG02-95ER54309.

  3. INJECTION TECHNOLOGY RESEARCH OF THE PROTECTIVE SCREEN

    Directory of Open Access Journals (Sweden)

    MENEJLYUK A. I.

    2016-12-01

    Full Text Available Formulation of the problem. This article contains information about the methods and the planning principles used in experimental research study of the injection technology of impervious screen. Today, there are ways to create impervious screens and curtains solve soil protection issues in the field impermeable layer arrangement at a shallow depth. However, for Ukraine, in the burial sites of radiation and other wastes is urgent issue of protection of underground space in places with deep impermeable layer. Classical methods can not fully solve such problems. To solve them, you need to develop innovative technology to create such a screen, which will lie authentic sole object to be protected, at the project depth. For the experiments, it is necessary to choose the most important indicator, and technological factors affecting it. This is due to the fact that the proposed technology provides for lesser known technical solutions, the use of which should ultimately result in impervious screens with desired properties. Goal. The aim of this study is the selection of technological parameters of injection, design of experiments and the selection of indicators characterizing the efficient operation of the screen. Such constructs must first have almost zero permeability. In this paper, it was of interest to study the influence of process parameters on the filtration rate of the protective screen. Conclusion. As a result of the design of experiments, the basic technological factors that have a significant effect on the studied parameters. varying levels of these factors are also identified, which in turn makes it possible to determine the optimum process parameters creating a screen that meets all the desired properties and characteristics. Based on a series of experiments it is possible to obtain optimal formulations for different types of soils.

  4. Longitudinal Trajectories of Ketamine Use among Young Injection Drug Users

    Science.gov (United States)

    Lankenau, Stephen E.; Bloom, Jennifer Jackson; Shin, Charles

    2010-01-01

    Background Ketamine is a dissociative anesthetic that became increasing popular in the club and rave scene in the 1980s and 1990s. Reports surfaced in the late 1990s indicating that ketamine was being injected in several U.S. cities by young injection drug users (IDUs). Since all studies on ketamine injection were cross-sectional, a longitudinal study was undertaken in 2005 to determine: characteristics of young IDUs who continue to inject ketamine; frequency of ketamine injection over an extended time period; risks associated with ongoing ketamine injection; and environmental factors that impact patterns of ketamine use. Methods Young IDUs aged 16 to 29 with a history of injecting ketamine (n=101) were recruited from public locations in Los Angeles and followed during a two-year longitudinal study. A semi-structured instrument captured quantitative and qualitative data on patterns of ketamine injection and other drug use. A statistical model sorted IDUs who completed three or more interviews (n=66) into three groups based upon patterns of ketamine injection at baseline and follow-up. Qualitative analysis focused on detailed case studies within each group. Results IDUs recruited at baseline were typically in their early 20s, male, heterosexual, white, and homeless. Longitudinal injection trajectories included: “Moderates,” who injected ketamine several times per year (n=5); “Occasionals,” who injected ketamine approximately once per year (n=21); and “Abstainers,” who did not inject any ketamine during follow-up (n=40). Findings suggest that ketamine is infrequently injected compared to other drugs such as heroin, cocaine, and methamphetamine. Most IDUs who begin injecting ketamine will stop or curb use due to: negative or ambivalent experiences associated with ketamine; an inability to find the drug due to declining supply; or maturing out of injecting drugs more generally. Conclusion Reducing ketamine injection among young IDUs may best be accomplished

  5. Methodology for the Randomised Injecting Opioid Treatment Trial (RIOTT: evaluating injectable methadone and injectable heroin treatment versus optimised oral methadone treatment in the UK

    Directory of Open Access Journals (Sweden)

    Byford Sarah

    2006-09-01

    Full Text Available Abstract Whilst unsupervised injectable methadone and diamorphine treatment has been part of the British treatment system for decades, the numbers receiving injectable opioid treatment (IOT has been steadily diminishing in recent years. In contrast, there has been a recent expansion of supervised injectable diamorphine programs under trial conditions in a number of European and North American cities, although the evidence regarding the safety, efficacy and cost effectiveness of this treatment approach remains equivocal. Recent British clinical guidance indicates that IOT should be a second-line treatment for those patients in high-quality oral methadone treatment who continue to regularly inject heroin, and that treatment be initiated in newly-developed supervised injecting clinics. The Randomised Injectable Opioid Treatment Trial (RIOTT is a multisite, prospective open-label randomised controlled trial (RCT examining the role of treatment with injected opioids (methadone and heroin for the management of heroin dependence in patients not responding to conventional substitution treatment. Specifically, the study examines whether efforts should be made to optimise methadone treatment for such patients (e.g. regular attendance, supervised dosing, high oral doses, access to psychosocial services, or whether such patients should be treated with injected methadone or heroin. Eligible patients (in oral substitution treatment and injecting illicit heroin on a regular basis are randomised to one of three conditions: (1 optimized oral methadone treatment (Control group; (2 injected methadone treatment; or (3 injected heroin treatment (with access to oral methadone doses. Subjects are followed up for 6-months, with between-group comparisons on an intention-to-treat basis across a range of outcome measures. The primary outcome is the proportion of patients who discontinue regular illicit heroin use (operationalised as providing >50% urine drug screens

  6. Comparison between the Effects of Intraperitoneal Injection of LDL and Intravenous Injection of LDL on Arterial Endothelial Cells Apoptosis

    Institute of Scientific and Technical Information of China (English)

    王丽; 秦瑾; 刘正湘

    2003-01-01

    Summary: To observe the effect of oxidized low density lipoprotein (OxLDL) on arterial endothelialcells apoptosis in vivo, we established a model in which Sprague-Dawley rats were given intraperi-toneal and intravenous injection of unmodified LDL (8 mg/kg every day) via the tail vein. Sevendays after the injection, the aortic endothelial cells specimens were prepared by an en face preparationof rat aorta. The apoptotic cells were identified and counted by in situ nick and labelling (TUNEL)method and light microcopy. The numbers of the apoptotic cells were 12.52±4.71/field in the in-traperitoneal injection control group, 11.41±2.94/field in the intravenous injection control group,22.98±8. 01/field in the intraperitoneal injection LDL group and 103. 8 ± 11.5/field in the intra-venous injection LDL group, respectively. The difference was significant between injection LDLgroup and control (P<0. 01), and the difference was also significant between two LDL injectiongroups (P<0. 01). These findings suggest that injection of LDL can induce apoptosis in arterial en-dothelial cells and the effect is especially significant with intravenous injection LDL. After injection,oxidative modification of LDL may occur in local arteries and causes injury to the endothelial cells.

  7. Ultrasound-guided piriformis muscle injection. A new approach.

    Science.gov (United States)

    Bevilacqua Alén, E; Diz Villar, A; Curt Nuño, F; Illodo Miramontes, G; Refojos Arencibia, F J; López González, J M

    2016-12-01

    Piriformis syndrome is an uncommon cause of buttock and leg pain. Some treatment options include the injection of piriformis muscle with local anesthetic and steroids. Various techniques for piriformis muscle injection have been described. Ultrasound allows direct visualization and real time injection of the piriformis muscle. We describe 5 consecutive patients, diagnosed of piriformis syndrome with no improvement after pharmacological treatment. Piriformis muscle injection with local anesthetics and steroids was performed using an ultrasound technique based on a standard technique. All 5 patients have improved their pain measured by numeric verbal scale. One patient had a sciatic after injection that improved in 10 days spontaneously. We describe an ultrasound-guided piriformis muscle injection that has the advantages of being effective, simple, and safe.

  8. Replenishing data descriptors in a DMA injection FIFO buffer

    Science.gov (United States)

    Archer, Charles J [Rochester, MN; Blocksome, Michael A [Rochester, MN; Cernohous, Bob R [Rochester, MN; Heidelberger, Philip [Cortlandt Manor, NY; Kumar, Sameer [White Plains, NY; Parker, Jeffrey J [Rochester, MN

    2011-10-11

    Methods, apparatus, and products are disclosed for replenishing data descriptors in a Direct Memory Access (`DMA`) injection first-in-first-out (`FIFO`) buffer that include: determining, by a messaging module on an origin compute node, whether a number of data descriptors in a DMA injection FIFO buffer exceeds a predetermined threshold, each data descriptor specifying an application message for transmission to a target compute node; queuing, by the messaging module, a plurality of new data descriptors in a pending descriptor queue if the number of the data descriptors in the DMA injection FIFO buffer exceeds the predetermined threshold; establishing, by the messaging module, interrupt criteria that specify when to replenish the injection FIFO buffer with the plurality of new data descriptors in the pending descriptor queue; and injecting, by the messaging module, the plurality of new data descriptors into the injection FIFO buffer in dependence upon the interrupt criteria.

  9. Incoherent vertical ion losses during multiturn stacking cooling beam injection

    Science.gov (United States)

    Syresin, E. M.

    2014-07-01

    The efficiency of the multiturn ion injection with electron cooling depends on two parameters, namely, cooling efficiency and ion lifetime. The lifetime of freshly injected ions is usually shorter than the lifetime of strongly cooled stacked ions. Freshly injected ions are lost in the vertical direction because the vertical acceptance of the synchrotron is usually a few times smaller than the horizontal acceptance. Incoherent vertical losses of freshly injected ions arise from their multiple scattering by residual gas atoms and transverse diffusion caused by stack noise. Reduced ion lifetime limits the multiturn injection efficiency. Analytical estimations and BETACOOL-based numerical evaluations of the vertical ion losses during multiturn injection are presented in comparison with the experimental data obtained at the HIMAC synchrotron and the S-LSR storage ring.

  10. Integrated semiconductor twin-microdisk laser under mutually optical injection

    Energy Technology Data Exchange (ETDEWEB)

    Zou, Ling-Xiu; Liu, Bo-Wen; Lv, Xiao-Meng; Yang, Yue-De; Xiao, Jin-Long; Huang, Yong-Zhen, E-mail: yzhuang@semi.ac.cn [State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China)

    2015-05-11

    We experimentally study the characteristics of an integrated semiconductor twin-microdisk laser under mutually optical injection through a connected optical waveguide. Based on the lasing spectra, four-wave mixing, injection locking, and period-two oscillation states are observed due to the mutually optical injection by adjusting the injected currents applied to the two microdisks. The enhanced 3 dB bandwidth is realized for the microdisk laser at the injection locking state, and photonic microwave is obtained from the electrode of the microdisk laser under the period-two oscillation state. The plentifully dynamical states similar as semiconductor lasers subject to external optical injection are realized due to strong optical interaction between the two microdisks.

  11. Quantum correlation in degenerate optical parametric oscillators with mutual injections

    CERN Document Server

    Takata, Kenta

    2015-01-01

    We theoretically and numerically study the quantum dynamics of two degenerate optical parametric oscillators with mutual injections. The cavity mode in the optical coupling path between the two oscillator facets is explicitly considered. Stochastic equations for the oscillators and mutual injection path based on the positive $P$ representation are derived. The system of two gradually pumped oscillators with out-of-phase mutual injections are simulated, and their quantum states are investigated. When the incoherent loss of the oscillators other than the mutual injections is small, the squeezed quadratic amplitudes $\\hat{p}$ in the oscillators are positively correlated near the oscillation threshold. It indicates finite quantum correlation, and the entanglement between the intracavity subharmonic fields. When with a small loss of the injection path, each oscillator around the phase transition point forms macroscopic superposition for a small pump noise. It suggests that the low-loss injection path works as a sq...

  12. Ultrasound-guided injection for plantar fasciitis: A brief review

    Directory of Open Access Journals (Sweden)

    A S Nair

    2016-01-01

    Full Text Available Plantar fasciitis (PF is a distressing condition experienced by many patients. Although self-limiting, it tends to become a chronic ailment if the precipitating factors are not addressed. One of the modality of treating PF is intra-lesional corticosteroid injection. This was done using palpation technique earlier but nowadays many specialists use ultrasound (US imaging as a guide to give injection accurately instead of inadvertently damaging the plantar fascia or injecting into surrounding soft tissue, both of which can have serious implications. We did a literature search in Medline, Scopus, and Embase databases to find out articles describing US-guided corticosteroid injection for treating PF and whether guided injection was effective than injection given by palpation.

  13. Gender differences in sexual and injection risk behavior among active young injection drug users in San Francisco (the UFO Study).

    Science.gov (United States)

    Evans, Jennifer L; Hahn, Judith A; Page-Shafer, Kimberly; Lum, Paula J; Stein, Ellen S; Davidson, Peter J; Moss, Andrew R

    2003-03-01

    Female injection drug users (IDUs) represent a large proportion of persons infected with HIV in the United States, and women who inject drugs have a high incidence of hepatitis B virus (HBV) and hepatitis C virus (HCV) infection. Therefore, it is important to understand the role of gender in injection risk behavior and the transmission of blood-borne virus. In 2000-2002, 844 young (<30 years old) IDUs were surveyed in San Francisco. We compared self-reported risk behavior between 584 males and 260 female participants from cross-sectional baseline data. We used logistic regression to determine whether demographic, structural, and relationship variables explained increased needle borrowing, drug preparation equipment sharing, and being injected by another IDU among females compared to males. Females were significantly younger than males and were more likely to engage in needle borrowing, ancillary equipment sharing, and being injected by someone else. Females were more likely than males to report recent sexual intercourse and to have IDU sex partners. Females and males were not different with respect to education, race/ethnicity, or housing status. In logistic regression models for borrowing a used needle and sharing drug preparation equipment, increased risk in females was explained by having an injection partner who was also a sexual partner. Injecting risk was greater in the young female compared to male IDUs despite equivalent frequency of injecting. Overlapping sexual and injection partnerships were a key factor in explaining increased injection risk in females. Females were more likely to be injected by another IDU even after adjusting for years injecting, being in a relationship with another IDU, and other potential confounders. Interventions to reduce sexual and injection practices that put women at risk of contracting hepatitis and HIV are needed.

  14. Development and validation of a novel scale for measuring interpersonal factors underlying injection drug using behaviours among injecting partnerships.

    Science.gov (United States)

    Morris, Meghan D; Neilands, Torsten B; Andrew, Erin; Maher, Lisa; Page, Kimberly A; Hahn, Judith A

    2017-10-01

    People who inject drugs with sexual partners or close friends have high rates of syringe/ancillary equipment sharing and HIV and hepatitis C virus (HCV) infection. Although evidence suggests that interpersonal factors underlie these higher risk profiles, there is no quantitative measure of how interpersonal factors operate within injecting relationships. We aimed to develop and validate a quantitative scale to assess levels of injecting drug-related interpersonal factors associated with risky injecting behaviours within injecting partnerships. We conducted qualitative interviews with 45 people who inject drugs (PWID) who reported having injecting partners to inform item development, and tested these items in a quantitative study of 140 PWID from San Francisco, USA, to assess internal reliability (Cronbach's alpha) and validity (convergent, and discriminant validity). With results from the qualitative interview data, we developed the Interpersonal Dynamics in Injecting Partnerships (IDIP) scale with 54 final items for 5 subscales of injecting-related interpersonal factors. Exploratory factor analysis revealed 5 factors ("trust", "power", "risk perception", "intimacy", and "cooperation") with eigenvalues of 14.32, 6.18, 3.55, 2.46, and 2.14, explaining 57% of the variance, and indicating good internal reliability (alpha: 0.92-0.68). Strong convergent validity was observed in bivariate logistic regression models where higher levels of trust, intimacy, and cooperation within partnerships were positively associated with partners sharing needles and injecting equipment, whereas higher levels of power and risk perception were negatively associated with partners sharing needles and injecting equipment. These findings offer strong evidence that the IDIP scale provides a psychometrically sound measure of injecting drug-related interpersonal dynamics. This measurement tool has the potential to facilitate additional investigations into the individual and collective impact of

  15. An optimization of injecting system in die casting

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    After many years of development, die casting technology of metallic materials has been matured. In this paper,the lower-support and its injecting system were created with commercial software. And then the simulation software FLOW3D was applied to study the flow behavior of the melt during injection filling process. Both temperature field and defect distribution were simulated. Based on these results, the better injecting system with two additional overflows was adopted.

  16. Mycobacterium chelonae Facial Infections Following Injection of Dermal Filler

    OpenAIRE

    Rodriguez, Jan M.; Xie, Yingda L.; Winthrop, Kevin L; Schafer, Sean; Sehdev, Paul; Solomon, Joel; Jensen, Bette; Toney, Nadege C.; Lewis, Paul F.

    2013-01-01

    A cluster of 3 facial Mycobacterium chelonae infections occurred after cosmetic dermal filler injections at a plastic surgery clinic. Pulsed-field gel electrophoresis showed that M chelonae isolated from the clinic tap water were identical to the patient wound isolates. Review of injection procedures identified application of nonsterile ice to the skin prior to injection as a possible source of M chelonae. Surveys of regional laboratories and a national plastic surgery listserv identified no ...

  17. Treatment of vesicoureteric reflux by endoscopic injection of Teflon.

    OpenAIRE

    1984-01-01

    Thirteen girls with grade III-V vesicoureteric reflux were treated by endoscopic injection of Teflon paste behind the intravesical ureter. Fourteen of the 18 treated ureters showed complete absence of reflux after one injection of Teflon. Three ureters required a second injection of Teflon for successful treatment of the reflux. One ureter with grade IV reflux was converted to grade II reflux. Properly carried out, this procedure corrects reflux. It takes less than 15 minutes, may be done as ...

  18. Fundus artery occlusion caused by cosmetic facial injections

    Institute of Scientific and Technical Information of China (English)

    Chen Yanyun; Wang Wenying; Li Jipeng; Yu Yajie; Li Lin; Lu Ning

    2014-01-01

    Background With the increasing popularity of cosmetic facial filler injections in recent years,more and more associated complications have been reported.However,the causative surgical procedures and preventative measures have not been studied well up to now.The aim of this stady was to investigate the clinical characteristics and visual prognosis of fundus artery occlusion resulting from cosmetic facial filler injections.Methods Thirteen consecutive patients with fundus artery occlusion caused by facial filler injections were included.Main outcome measures were filler materials,injection sites,best-corrected visual acuity (BCVA),fundus fluorescein angiography,and associated ocular and systemic manifestations.Results Eleven patients had ophthalmic artery occlusion (OAO) and one patient each had central retinal artery occlusion (CRAO) and anterior ischemic optic neuropathy (AION).Injected materials included autologous fat (seven cases),hyaluronic acid (five cases),and bone collagen (one case).Injection sites were the frontal area (five cases),periocular area (two cases),temple area (two cases),and nose area and nasal area (4 cases).Injected autologous fat was associated with worse final BCVA than hyaluronic acid.The BCVA of seven patients with autologous fat injection in frontal area and temple area was no light perception.Most of the patients with OAO had ocular pain,headache,ptosis,ophthalmoplegia,and no improvement in final BCVA.Conclusions Cosmetic facial injections can cause fundus artery occlusion.Autologous fat injection tends to be associated with painful blindness,ptosis,ophthalmoplegia,and poor visual outcomes.The prognosis is much worse with autologous fat injection than hyaluronic acid injection.

  19. Pulpal Response to Intraligamentary Injection in the Cynomologus Monkey

    OpenAIRE

    Peurach, James C.

    1985-01-01

    The objective of this study was to determine if intraligamentary injection causes qualitative histopathologic changes in the dental pulp of a Cynomologus monkey. In as much as the pulp and periapical tissues of the monkey are similar to that of humans, nonresolving damage to the pulp would contraindicate periodontal ligament injection in procedures where the tooth would not be extracted or the pulp extirpated. Periodontal ligament injection in this study did not produce any histopathological ...

  20. Intracranial Injection of Adeno-associated Viral Vectors

    OpenAIRE

    Lowery, Rebecca L.; Ania K Majewska

    2010-01-01

    Intracranial injection of viral vectors engineered to express a fluorescent protein is a versatile labeling technique for visualization of specific subsets of cells in different brain regions both in vivo and in brain sections. Unlike the injection of fluorescent dyes, viral labeling offers targeting of individual cell types and is less expensive and time consuming than establishing transgenic mouse lines. In this technique, an adeno-associated viral (AAV) vector is injected intracranially us...