WorldWideScience

Sample records for familial als model

  1. Familial ALS

    Science.gov (United States)

    Boylan, Kevin

    2015-01-01

    Synopsis Genes linked to ALS susceptibility are being identified at an increasing rate owing to advances in molecular genetic technology. Genetic mechanisms in ALS pathogenesis appear to exert major effects in ~10% of patients, but genetic factors at some level may be important components of disease risk in most ALS patients. Identification of gene variants associated with ALS has informed concepts of the pathogenesis of ALS, aided the identification of therapeutic targets, facilitated research to develop new ALS biomarkers, and supported the establishment of clinical diagnostic tests for ALS-linked genes. Translation of this knowledge to ALS therapy development is ongoing. PMID:26515623

  2. Genetics of Familial and Sporadic ALS

    Science.gov (United States)

    2018-03-27

    Amyotrophic Lateral Sclerosis (ALS); Familial Amyotrophic Lateral Sclerosis; Amyotrophic Lateral Sclerosis With Frontotemporal Dementia; Lou Gehrig's Disease; Motor Neuron Disease; Primary Lateral Sclerosis

  3. Ex Vivo Gene Therapy Using Human Mesenchymal Stem Cells to Deliver Growth Factors in the Skeletal Muscle of a Familial ALS Rat Model.

    Science.gov (United States)

    Suzuki, Masatoshi; Svendsen, Clive N

    2016-01-01

    Therapeutic protein and molecule delivery to target sites by transplanted human stem cells holds great promise for ex vivo gene therapy. Our group has demonstrated the therapeutic benefits of ex vivo gene therapy targeting the skeletal muscles in a transgenic rat model of familial amyotrophic lateral sclerosis (ALS). We used human mesenchymal stem cells (hMSCs) and genetically modified them to release neuroprotective growth factors such as glial cell line-derived neurotrophic factor (GDNF) and vascular endothelial growth factor (VEGF). Intramuscular growth factor delivery via hMSCs can enhance neuromuscular innervation and motor neuron survival in a rat model of ALS (SOD1(G93A) transgenic rats). Here, we describe the protocol of ex vivo delivery of growth factors via lentiviral vector-mediated genetic modification of hMSCs and hMSC transplantation into the skeletal muscle of a familial ALS rat model.

  4. Phenotypic and genotypic studies of ALS cases in ALS-SMA families.

    Science.gov (United States)

    Corcia, Philippe; Vourc'h, Patrick; Blasco, Helene; Couratier, Philippe; Dangoumau, Audrey; Bellance, Remi; Desnuelle, Claude; Viader, Fausto; Pautot, Vivien; Millecamps, Stephanie; Bakkouche, Salah; Salachas, FranÇois; Andres, Christian R; Meininger, Vincent; Camu, William

    2018-03-01

    Amyotrophic lateral sclerosis (ALS) and spinal muscular atrophy (SMA) are the most frequent motor neuron disorders in adulthood and infancy, respectively. There is a growing literature supporting common pathophysiological patterns between those disorders. One important clinical issue for that is the co-occurrence of both diseases within a family. To collect families in which ALS and SMA patients co-exist and describe the phenotype and the genotype of ALS patients. Nine families with co-occurrence of SMA and ALS have been gathered over the last 15 years. Epidemiological, phenotype and genetic status were collected. Out of the nine families, six corresponded to the criteria of familial ALS (FALS). Clinical data were available for 11 patients out of the 15 ALS cases. Mean age of onset was 58.5 years, site of onset was lower limbs in nine cases (81.8%), median duration was 22 months. Four ALS patients carried a mutation: three mutations in SOD1 gene (G147N in two cases and one with E121G) and one repeat expansion in the C9ORF72 gene. Three patients had abnormal SMN1 copy numbers. While the high proportion of familial history of ALS cases in these ALS-SMA pedigrees could have suggested that these familial clusters of the two most frequent MND rely on a genetic background, we failed to exclude that this occurred by chance.

  5. An inducer of VGF protects cells against ER stress-induced cell death and prolongs survival in the mutant SOD1 animal models of familial ALS.

    Directory of Open Access Journals (Sweden)

    Masamitsu Shimazawa

    2010-12-01

    Full Text Available Amyotrophic lateral sclerosis (ALS is the most frequent adult-onset motor neuron disease, and recent evidence has suggested that endoplasmic reticulum (ER stress signaling is involved in the pathogenesis of ALS. Here we identified a small molecule, SUN N8075, which has a marked protective effect on ER stress-induced cell death, in an in vitro cell-based screening, and its protective mechanism was mediated by an induction of VGF nerve growth factor inducible (VGF: VGF knockdown with siRNA completely abolished the protective effect of SUN N8075 against ER-induced cell death, and overexpression of VGF inhibited ER-stress-induced cell death. VGF level was lower in the spinal cords of sporadic ALS patients than in the control patients. Furthermore, SUN N8075 slowed disease progression and prolonged survival in mutant SOD1 transgenic mouse and rat models of ALS, preventing the decrease of VGF expression in the spinal cords of ALS mice. These data suggest that VGF plays a critical role in motor neuron survival and may be a potential new therapeutic target for ALS, and SUN N8075 may become a potential therapeutic candidate for treatment of ALS.

  6. A mouse model of familial ALS has increased CNS levels of endogenous ubiquinol9/10 and does not benefit from exogenous administration of ubiquinol10.

    Directory of Open Access Journals (Sweden)

    Jacopo Lucchetti

    Full Text Available Oxidative stress and mitochondrial impairment are the main pathogenic mechanisms of Amyotrophic Lateral Sclerosis (ALS, a severe neurodegenerative disease still lacking of effective therapy. Recently, the coenzyme-Q (CoQ complex, a key component of mitochondrial function and redox-state modulator, has raised interest for ALS treatment. However, while the oxidized form ubiquinone10 was ineffective in ALS patients and modestly effective in mouse models of ALS, no evidence was reported on the effect of the reduced form ubiquinol10, which has better bioavailability and antioxidant properties. In this study we compared the effects of ubiquinone10 and a new stabilized formulation of ubiquinol10 on the disease course of SOD1(G93A transgenic mice, an experimental model of fALS. Chronic treatments (800 mg/kg/day orally started from the onset of disease until death, to mimic the clinical trials that only include patients with definite ALS symptoms. Although the plasma levels of CoQ10 were significantly increased by both treatments (from <0.20 to 3.0-3.4 µg/mL, no effect was found on the disease progression and survival of SOD1(G93A mice. The levels of CoQ10 in the brain and spinal cord of ubiquinone10- or ubiquinol10-treated mice were only slightly higher (≤10% than the endogenous levels in vehicle-treated mice, indicating poor CNS availability after oral dosing and possibly explaining the lack of pharmacological effects. To further examine this issue, we measured the oxidized and reduced forms of CoQ9/10 in the plasma, brain and spinal cord of symptomatic SOD1(G93A mice, in comparison with age-matched SOD1(WT. Levels of ubiquinol9/10, but not ubiquinone9/10, were significantly higher in the CNS, but not in plasma, of SOD1(G93A mice, suggesting that CoQ redox system might participate in the mechanisms trying to counteract the pathology progression. Therefore, the very low increases of CoQ10 induced by oral treatments in CNS might be not sufficient to

  7. Burden of rare variants in ALS genes influences survival in familial and sporadic ALS.

    Science.gov (United States)

    Pang, Shirley Yin-Yu; Hsu, Jacob Shujui; Teo, Kay-Cheong; Li, Yan; Kung, Michelle H W; Cheah, Kathryn S E; Chan, Danny; Cheung, Kenneth M C; Li, Miaoxin; Sham, Pak-Chung; Ho, Shu-Leong

    2017-10-01

    Genetic variants are implicated in the development of amyotrophic lateral sclerosis (ALS), but it is unclear whether the burden of rare variants in ALS genes has an effect on survival. We performed whole genome sequencing on 8 familial ALS (FALS) patients with superoxide dismutase 1 (SOD1) mutation and whole exome sequencing on 46 sporadic ALS (SALS) patients living in Hong Kong and found that 67% had at least 1 rare variant in the exons of 40 ALS genes; 22% had 2 or more. Patients with 2 or more rare variants had lower probability of survival than patients with 0 or 1 variant (p = 0.001). After adjusting for other factors, each additional rare variant increased the risk of respiratory failure or death by 60% (p = 0.0098). The presence of the rare variant was associated with the risk of ALS (Odds ratio 1.91, 95% confidence interval 1.03-3.61, p = 0.03), and ALS patients had higher rare variant burden than controls (MB, p = 0.004). Our findings support an oligogenic basis with the burden of rare variants affecting the development and survival of ALS. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

  8. PREDICTING NORMATIVE AND PROBLEMATIC FAMILY PATHWAYS TO THE TRANSITION TO SIBLINGHOOD: COMMENTARY ON VOLLING ET AL.'S MONOGRAPH.

    Science.gov (United States)

    Howe, Nina

    2017-09-01

    Volling et al.'s monograph provides a rich, thoughtful, and rigorous account of how the transition to siblinghood is experienced by the first-born child and the family. In their comprehensive longitudinal study, they followed 241 families from the prenatal period before the second-born's birth until this child was 12-months old. Siblings are a critical, but understudied, relationship in children's development; the challenges posed in researching sibling dynamics in the context of the family are discussed. Prior psychodynamic and developmental research literature is critiqued, which places the current study into perspective and indicates the important theoretical frameworks (i.e., developmental psychopathology and developmental ecological systems) employed by Volling et al. to advance our understanding of this critical transition in the life of the family. The longitudinal study design, sample characteristics, identification of possible trajectories of adjustment (or not) to the birth of the sibling, and selection of family and child variables are addressed. The sophisticated statistical methods (Growth Mixture Modeling and data mining procedures) employed to predict child adjustment in association with parenting variables over time and sibling relationship quality at 12 months identified low- and high-risk trajectories on the seven subscales of the Child Behavior Check List (CBCL). This afforded a nuanced investigation of a variety of potentially problematic child behaviors (e.g., aggression, withdrawal, negative emotionality, somatic problems) in association with parenting behaviors. A final discussion included study limitations, significant strengths, and implications for clinicians and other professionals. The study's conclusion is that most children and families are resilient, take the birth of a sibling in their stride, and do not exhibit empirical evidence of a developmental crisis, as argued by earlier psychodynamic authors. © 2017 The Society for Research

  9. The confluence model: birth order as a within-family or between-family dynamic?

    Science.gov (United States)

    Zajonc, R B; Sulloway, Frank J

    2007-09-01

    The confluence model explains birth-order differences in intellectual performance by quantifying the changing dynamics within the family. Wichman, Rodgers, and MacCallum (2006) claimed that these differences are a between-family phenomenon--and hence are not directly related to birth order itself. The study design and analyses presented by Wichman et al. nevertheless suffer from crucial shortcomings, including their use of unfocused tests, which cause statistically significant trends to be overlooked. In addition, Wichman et al. treated birth-order effects as a linear phenomenon thereby ignoring the confluence model's prediction that these two samples may manifest opposing results based on age. This article cites between- and within-family data that demonstrate systematic birth-order effects as predicted by the confluence model. The corpus of evidence invoked here offers strong support for the assumption of the confluence model that birth-order differences in intellectual performance are primarily a within-family phenomenon.

  10. Decision-making among patients and their family in ALS care: a review.

    Science.gov (United States)

    Foley, Geraldine; Hynes, Geralyn

    2018-05-01

    Practice guidelines in ALS care emphasise the role of the patient and their family in the decision-making process. We aimed to examine the ALS patient/family relationship in the decision-making process and to ascertain how patients and their family can shape one another's decisions pertaining to care. We conducted a review of peer-reviewed empirical research, published in full and in English between January 2007 and January 2017, relating to care decision-making among ALS patients and their family. Database sources included: Medline; CINAHL; AMED; PsycINFO; PsycARTICLES; and Social Sciences Full Text. A narrative synthesis was undertaken. Forty-seven studies from the empirical literature were extracted. The family viewpoint was captured primarily from family members with direct care-giving duties. Patients' cognitive status was not routinely assessed. The findings revealed that the decision-making process in ALS care can be contoured by patients' and family caregivers' perceived responsibilities to one another and to the wider family. Greater attention to family member roles beyond the primary caregiver role is needed. Strategies that integrate cognitively-impaired patients into the family decision-making process require investigation. Identification of the domains in which ALS patients and their family members support one another in the decision-making process could facilitate the development of patient/family decision-making tools in ALS care.

  11. Comprehensive analysis of the mutation spectrum in 301 German ALS families.

    Science.gov (United States)

    Müller, Kathrin; Brenner, David; Weydt, Patrick; Meyer, Thomas; Grehl, Torsten; Petri, Susanne; Grosskreutz, Julian; Schuster, Joachim; Volk, Alexander E; Borck, Guntram; Kubisch, Christian; Klopstock, Thomas; Zeller, Daniel; Jablonka, Sibylle; Sendtner, Michael; Klebe, Stephan; Knehr, Antje; Günther, Kornelia; Weis, Joachim; Claeys, Kristl G; Schrank, Berthold; Sperfeld, Anne-Dorte; Hübers, Annemarie; Otto, Markus; Dorst, Johannes; Meitinger, Thomas; Strom, Tim M; Andersen, Peter M; Ludolph, Albert C; Weishaupt, Jochen H

    2018-04-12

    Recent advances in amyotrophic lateral sclerosis (ALS) genetics have revealed that mutations in any of more than 25 genes can cause ALS, mostly as an autosomal-dominant Mendelian trait. Detailed knowledge about the genetic architecture of ALS in a specific population will be important for genetic counselling but also for genotype-specific therapeutic interventions. Here we combined fragment length analysis, repeat-primed PCR, Southern blotting, Sanger sequencing and whole exome sequencing to obtain a comprehensive profile of genetic variants in ALS disease genes in 301 German pedigrees with familial ALS. We report C9orf72 mutations as well as variants in consensus splice sites and non-synonymous variants in protein-coding regions of ALS genes. We furthermore estimate their pathogenicity by taking into account type and frequency of the respective variant as well as segregation within the families. 49% of our German ALS families carried a likely pathogenic variant in at least one of the earlier identified ALS genes. In 45% of the ALS families, likely pathogenic variants were detected in C9orf72, SOD1, FUS, TARDBP or TBK1 , whereas the relative contribution of the other ALS genes in this familial ALS cohort was 4%. We identified several previously unreported rare variants and demonstrated the absence of likely pathogenic variants in some of the recently described ALS disease genes. We here present a comprehensive genetic characterisation of German familial ALS. The present findings are of importance for genetic counselling in clinical practice, for molecular research and for the design of diagnostic gene panels or genotype-specific therapeutic interventions in Europe. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  12. Structural diversity of a family of aluminophosphates with Al/P ratio of non-unity

    Science.gov (United States)

    Yu, Jihong; Xu, Ruren; Li, Jiyang

    2000-05-01

    A family of organically templated aluminophosphates (denoted AlPOs) with an Al/P ratio of non-unity has been prepared with 1-D chain, 2-D layer and 3-D open-framework architectures. Their inorganic parts are constructed from alternating Al-centered polyhedra (AlO 4, AlO 5, AlO 4(OH 2) 2) and P-centered tetrahedra P(OAl) nO 4- n ( n=0, 1, 2, 3). The existence of terminal POH and/or PO groups in the structures results in the deviation of Al/P ratio from unity, and the commonly encountered Al/P ratios are 1/2, 3/5, 2/3, 3/4, 4/5 and 5/6. This review will discuss the structural features of these AlPOs with various dimensionalities and stoichiometries.

  13. Product Family Modelling for Manufacturing Planning

    DEFF Research Database (Denmark)

    Jørgensen, Kaj Asbjørn; Petersen, Thomas Ditlev; Nielsen, Kjeld

    2011-01-01

    To enable product configuration of a product family, it is important to develop a model of the selected product family. From such a model, an often performed practice is to make a product configurator from which customers can specify individual products from the family. To get further utilisation...

  14. The wobbler mouse, an ALS animal model

    DEFF Research Database (Denmark)

    Moser, Jakob Maximilian; Bigini, Paolo; Schmitt-John, Thomas

    2013-01-01

    This review article is focused on the research progress made utilizing the wobbler mouse as animal model for human motor neuron diseases, especially the amyotrophic lateral sclerosis (ALS). The wobbler mouse develops progressive degeneration of upper and lower motor neurons and shows striking...

  15. Exome sequencing reveals VCP mutations as a cause of familial ALS

    OpenAIRE

    Johnson, Janel O.; Mandrioli, Jessica; Benatar, Michael; Abramzon, Yevgeniya; Van Deerlin, Vivianna M.; Trojanowski, John Q.; Gibbs, J Raphael; Brunetti, Maura; Gronka, Susan; Wuu, Joanne; Ding, Jinhui; McCluskey, Leo; Martinez-Lage, Maria; Falcone, Dana; Hernandez, Dena G.

    2010-01-01

    Using exome sequencing, we identified a p.R191Q amino acid change in the valosin-containing protein (VCP) gene in an Italian family with autosomal dominantly inherited amyotrophic lateral sclerosis (ALS). Mutations in VCP have previously been identified in families with Inclusion Body Myopathy, Paget’s disease and Frontotemporal Dementia (IBMPFD). Screening of VCP in a cohort of 210 familial ALS cases and 78 autopsy-proven ALS cases identified four additional mutations including a p.R155H mut...

  16. Candida albicans Agglutinin-Like Sequence (Als) Family Vignettes: A Review of Als Protein Structure and Function

    Science.gov (United States)

    Hoyer, Lois L.; Cota, Ernesto

    2016-01-01

    Approximately two decades have passed since the description of the first gene in the Candida albicans ALS (agglutinin-like sequence) family. Since that time, much has been learned about the composition of the family and the function of its encoded cell-surface glycoproteins. Solution of the structure of the Als adhesive domain provides the opportunity to evaluate the molecular basis for protein function. This review article is formatted as a series of fundamental questions and explores the diversity of the Als proteins, as well as their role in ligand binding, aggregative effects, and attachment to abiotic surfaces. Interaction of Als proteins with each other, their functional equivalence, and the effects of protein abundance on phenotypic conclusions are also examined. Structural features of Als proteins that may facilitate invasive function are considered. Conclusions that are firmly supported by the literature are presented while highlighting areas that require additional investigation to reveal basic features of the Als proteins, their relatedness to each other, and their roles in C. albicans biology. PMID:27014205

  17. Novel heterozygous nonsense mutation of the OPTN gene segregating in a Danish family with ALS

    DEFF Research Database (Denmark)

    Tümer, Zeynep; Bertelsen, Birgitte; Gredal, Ole

    2012-01-01

    Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disorder. About 10% of ALS cases are familial (FALS) and the genetic defect is known only in approximately 20%-30% of these cases. The most common genetic cause of ALS is SOD1 (superoxide dismutase 1) mutation. Very recently......, mutations of the optineurin gene (OPTN), which is involved in open-angle glaucoma, were identified in 3 Japanese patients/families with ALS, and subsequently in a few FALS patients of European descent. We found a heterozygous nonsense mutation (c.493C>T, p.Gln165X, exon 6) in the OPTN gene in a Danish...... patient with ALS, and the mutation segregated from his affected father. The p.Gln165X mutation could not be detected in 1070 healthy Danish controls, in 1000 Danish individuals with metabolic phenotypes or in 64 sporadic ALS (SALS) cases. The p.Gln165X mutation described in this study is the first...

  18. Hot-spot KIF5A mutations cause familial ALS.

    Science.gov (United States)

    Brenner, David; Yilmaz, Rüstem; Müller, Kathrin; Grehl, Torsten; Petri, Susanne; Meyer, Thomas; Grosskreutz, Julian; Weydt, Patrick; Ruf, Wolfgang; Neuwirth, Christoph; Weber, Markus; Pinto, Susana; Claeys, Kristl G; Schrank, Berthold; Jordan, Berit; Knehr, Antje; Günther, Kornelia; Hübers, Annemarie; Zeller, Daniel; Kubisch, Christian; Jablonka, Sibylle; Sendtner, Michael; Klopstock, Thomas; de Carvalho, Mamede; Sperfeld, Anne; Borck, Guntram; Volk, Alexander E; Dorst, Johannes; Weis, Joachim; Otto, Markus; Schuster, Joachim; Del Tredici, Kelly; Braak, Heiko; Danzer, Karin M; Freischmidt, Axel; Meitinger, Thomas; Strom, Tim M; Ludolph, Albert C; Andersen, Peter M; Weishaupt, Jochen H

    2018-01-12

    Heterozygous missense mutations in the N-terminal motor or coiled-coil domains of the kinesin family member 5A (KIF5A) gene cause monogenic spastic paraplegia (HSP10) and Charcot-Marie-Tooth disease type 2 (CMT2). Moreover, heterozygous de novo frame-shift mutations in the C-terminal domain of KIF5A are associated with neonatal intractable myoclonus, a neurodevelopmental syndrome. These findings, together with the observation that many of the disease genes associated with amyotrophic lateral sclerosis disrupt cytoskeletal function and intracellular transport, led us to hypothesize that mutations in KIF5A are also a cause of amyotrophic lateral sclerosis. Using whole exome sequencing followed by rare variant analysis of 426 patients with familial amyotrophic lateral sclerosis and 6137 control subjects, we detected an enrichment of KIF5A splice-site mutations in amyotrophic lateral sclerosis (2/426 compared to 0/6137 in controls; P = 4.2 × 10-3), both located in a hot-spot in the C-terminus of the protein and predicted to affect splicing exon 27. We additionally show co-segregation with amyotrophic lateral sclerosis of two canonical splice-site mutations in two families. Investigation of lymphoblast cell lines from patients with KIF5A splice-site mutations revealed the loss of mutant RNA expression and suggested haploinsufficiency as the most probable underlying molecular mechanism. Furthermore, mRNA sequencing of a rare non-synonymous missense mutation (predicting p.Arg1007Gly) located in the C-terminus of the protein shortly upstream of the splice donor of exon 27 revealed defective KIF5A pre-mRNA splicing in respective patient-derived cell lines owing to abrogation of the donor site. Finally, the non-synonymous single nucleotide variant rs113247976 (minor allele frequency = 1.00% in controls, n = 6137), also located in the C-terminal region [p.(Pro986Leu) in exon 26], was significantly enriched in familial amyotrophic lateral sclerosis patients (minor allele

  19. Hot-spot KIF5A mutations cause familial ALS

    Science.gov (United States)

    Yilmaz, Rüstem; Müller, Kathrin; Grehl, Torsten; Petri, Susanne; Meyer, Thomas; Grosskreutz, Julian; Weydt, Patrick; Ruf, Wolfgang; Neuwirth, Christoph; Weber, Markus; Pinto, Susana; Claeys, Kristl G; Schrank, Berthold; Jordan, Berit; Knehr, Antje; Günther, Kornelia; Hübers, Annemarie; Zeller, Daniel; Kubisch, Christian; Jablonka, Sibylle; Klopstock, Thomas; de Carvalho, Mamede; Sperfeld, Anne; Borck, Guntram; Volk, Alexander E; Dorst, Johannes; Weis, Joachim; Otto, Markus; Schuster, Joachim; Del Tredici, Kelly; Braak, Heiko; Danzer, Karin M; Freischmidt, Axel; Meitinger, Thomas; Strom, Tim M; Ludolph, Albert C; Andersen, Peter M; Weishaupt, Jochen H; Weyen, Ute; Hermann, Andreas; Hagenacker, Tim; Koch, Jan Christoph; Lingor, Paul; Göricke, Bettina; Zierz, Stephan; Baum, Petra; Wolf, Joachim; Winkler, Andrea; Young, Peter; Bogdahn, Ulrich; Prudlo, Johannes; Kassubek., Jan

    2018-01-01

    Abstract Heterozygous missense mutations in the N-terminal motor or coiled-coil domains of the kinesin family member 5A (KIF5A) gene cause monogenic spastic paraplegia (HSP10) and Charcot-Marie-Tooth disease type 2 (CMT2). Moreover, heterozygous de novo frame-shift mutations in the C-terminal domain of KIF5A are associated with neonatal intractable myoclonus, a neurodevelopmental syndrome. These findings, together with the observation that many of the disease genes associated with amyotrophic lateral sclerosis disrupt cytoskeletal function and intracellular transport, led us to hypothesize that mutations in KIF5A are also a cause of amyotrophic lateral sclerosis. Using whole exome sequencing followed by rare variant analysis of 426 patients with familial amyotrophic lateral sclerosis and 6137 control subjects, we detected an enrichment of KIF5A splice-site mutations in amyotrophic lateral sclerosis (2/426 compared to 0/6137 in controls; P = 4.2 × 10−3), both located in a hot-spot in the C-terminus of the protein and predicted to affect splicing exon 27. We additionally show co-segregation with amyotrophic lateral sclerosis of two canonical splice-site mutations in two families. Investigation of lymphoblast cell lines from patients with KIF5A splice-site mutations revealed the loss of mutant RNA expression and suggested haploinsufficiency as the most probable underlying molecular mechanism. Furthermore, mRNA sequencing of a rare non-synonymous missense mutation (predicting p.Arg1007Gly) located in the C-terminus of the protein shortly upstream of the splice donor of exon 27 revealed defective KIF5A pre-mRNA splicing in respective patient-derived cell lines owing to abrogation of the donor site. Finally, the non-synonymous single nucleotide variant rs113247976 (minor allele frequency = 1.00% in controls, n = 6137), also located in the C-terminal region [p.(Pro986Leu) in exon 26], was significantly enriched in familial amyotrophic lateral sclerosis patients (minor

  20. Väterforschung als Familienforschung Fatherhood research as family research

    Directory of Open Access Journals (Sweden)

    Walter Bien

    2004-11-01

    Full Text Available Männer im Übergang zur Vaterschaft von Ariane Schorn ist ein interessantes, empfehlenswertes Buch, das einen wichtigen, bisher wenig beleuchteten Aspekt im Alltag eines Großteils der Bevölkerung umfasst, immerhin sind bzw. werden zwischen70 und 80% aller Männer im Laufe ihres Lebens einmal Vater. Das Buch zeigt eine lebendige, nicht immer einfache Entwicklung in einer schwierigen Zeit der Familientriade.Männer im Übergang zur Vaterschaft (Men in transition to fatherhood by Ariane Schorn is an interesting and recommendable book. It is concerned with an important yet little explored aspect of the everyday life of a majority of people—after all, between 70 and 80 percent of all men become fathers at some point in their life. The book shows a lively, but not always simple process in a time that is quite difficult for the family triad.

  1. Modeling the Dynamical Structure of the Haumea Family

    Science.gov (United States)

    Proudfoot, Benjamin; Ragozzine, Darin

    2018-04-01

    Collisions are known to be critical in explaining the full story of the outer Solar System. The dwarf planet Haumea provides a unique empirical view into this, as Haumea is the only known example of a collisional family in the Kuiper Belt. Although there have been many Haumea formation hypotheses presented in the literature, none are fully self-consistent. In particular, it is challenging to explain the low ejection velocity of the family. With the addition of many new Haumea family members (Maggard & Ragozzine 2018, in prep.), we further investigate how we can use collision models to recreate the current dynamical distribution of Haumea family members in (proper) a-e-i-dv-H space. Using synthetic families created using different collision models, we use a Bayesian methodology to infer the posterior distribution of our model parameters that best matches the current family. Our newest results continue to exclude the planar distribution of family members that would result from a ‘graze-and-merge’ type collision (e.g., Leinhardt et al. 2010) based on a lack of a-e-i correlation (Proudfoot & Ragozzine, DPS 2017, DDA 2017). We present here our results from more models. We have also validated a statistical method for automatically and self-consistently identifying interlopers from the background population.

  2. Alternative models for academic family practices

    Directory of Open Access Journals (Sweden)

    Yarnall Kimberly SH

    2006-03-01

    Full Text Available Abstract Background The Future of Family Medicine Report calls for a fundamental redesign of the American family physician workplace. At the same time, academic family practices are under economic pressure. Most family medicine departments do not have self-supporting practices, but seek support from specialty colleagues or hospital practice plans. Alternative models for academic family practices that are economically viable and consistent with the principles of family medicine are needed. This article presents several "experiments" to address these challenges. Methods The basis of comparison is a traditional academic family medicine center. Apart of the faculty practice plan, our center consistently operated at a deficit despite high productivity. A number of different practice types and alternative models of service delivery were therefore developed and tested. They ranged from a multi-specialty office arrangement, to a community clinic operated as part of a federally-qualified health center, to a team of providers based in and providing care for residents of an elderly public housing project. Financial comparisons using consistent accounting across models are provided. Results Academic family practices can, at least in some settings, operate without subsidy while providing continuity of care to a broad segment of the community. The prerequisites are that the clinicians must see patients efficiently, and be able to bill appropriately for their payer mix. Conclusion Experimenting within academic practice structure and organization is worthwhile, and can result in economically viable alternatives to traditional models.

  3. Asteroid families from cratering: Detection and models

    Science.gov (United States)

    Milani, A.; Cellino, A.; Knežević, Z.; Novaković, B.; Spoto, F.; Paolicchi, P.

    2014-07-01

    A new asteroid families classification, more efficient in the inclusion of smaller family members, shows how relevant the cratering impacts are on large asteroids. These do not disrupt the target, but just form families with the ejecta from large craters. Of the 12 largest asteroids, 8 have cratering families: number (2), (4), (5), (10), (87), (15), (3), and (31). At least another 7 cratering families can be identified. Of the cratering families identified so far, 7 have >1000 members. This imposes a remarkable change from the focus on fragmentation families of previous classifications. Such a large dataset of asteroids believed to be crater ejecta opens a new challenge: to model the crater and family forming event(s) generating them. The first problem is to identify which cratering families, found by the similarity of proper elements, can be formed at once, with a single collision. We have identified as a likely outcome of multiple collisions the families of (4), (10), (15), and (20). Of the ejecta generated by cratering, only a fraction reaches the escape velocity from the surviving parent body. The distribution of velocities at infinity, giving to the resulting family an initial position and shape in the proper elements space, is highly asymmetric with respect to the parent body. This shape is deformed by the Yarkovsky effect and by the interaction with resonances. All the largest asteroids have been subjected to large cratering events, thus the lack of a family needs to be interpreted. The most interesting case is (1) Ceres, which is not the parent body of the nearby family of (93). Two possible interpretations of the low family forming efficiency are based on either the composition of Ceres with a significant fraction of ice, protected by a thin crust, or with the larger escape velocity of ~500 m/s.

  4. Modeling dependencies in product families with COVAMOF

    NARCIS (Netherlands)

    Sinnema, Marco; Deelstra, Sybren; Nijhuis, Jos; Bosch, Jan; Riebisch, M; Tabeling, P; Zorn, W

    2006-01-01

    Many variability modeling approaches consider only formalized dependencies, i.e. in- or exclude relations between variants. However, in real industrial product families, dependencies are often much more complicated. In this paper, we discuss the product derivation problems associated with

  5. Newcomers to Al-Anon family groups: Who stays and who drops out?

    Science.gov (United States)

    Timko, Christine; Laudet, Alexandre; Moos, Rudolf H

    2014-06-01

    Al-Anon Family Groups (Al-Anon), a 12-step mutual-help program for people concerned about another's drinking, is the most widely used form of help for concerned others (COs) in the US. This study assessed the prevalence of dropout, and predictors of dropout, in the six months following newcomers' initial attendance at Al-Anon meetings. Al-Anon's World Service Office mailed a random sample of groups, which subsequently yielded a sample of 251 newcomers who completed surveys at baseline and 6 months later. At the 6-month follow-up, 57% of newcomers at baseline had dropped out (had not attended any Al-Anon meetings during the past month). At baseline, individuals who later dropped out of Al-Anon were less likely to have been referred to Al-Anon by their drinker's health care provider, and reported less severe problems than individuals who continued to attend, but dropouts were more often concerned about their drinker's psychological health; newcomers with these concerns may have found them incompatible with Al-Anon's philosophy. Dropouts reported high rates of problems, suggesting that COs who drop out of Al-Anon would benefit from ongoing help and support. Published by Elsevier Ltd.

  6. Microstructural defects modeling in the Al-Mo system

    International Nuclear Information System (INIS)

    Pascuet, Maria I.; Fernandez, Julian R.; Monti, Ana M.

    2006-01-01

    In this work we have utilized computer simulation techniques to study microstructural defects, such as point defects and interfaces, in the Al-Mo alloy. Such alloy is taken as a model to study the Al(fcc)/U-Mo(bcc) interface. The EAM interatomic potential used has been fitted to the formation energy and lattice constant of the AlMo 3 intermetallic. Formation of vacancies for both components Al and Mo and anti-sites, Al Mo and Mo Al , as well as vacancy migration was studied in this structure. We found that the lowest energy defect complex that preserves stoichiometry is the antisite pair Al Mo +Mo Al , in correspondence with other intermetallics of the same structure. Our results also suggest that the structure of the Al(fcc)/Mo(bcc) interface is unstable, while that of the Al(fcc)/Al 5 Mo interface is stable, as observed experimentally. (author) [es

  7. Modelling Configuration Knowledge in Heterogeneous Product Families

    DEFF Research Database (Denmark)

    Queva, Matthieu Stéphane Benoit; Männistö, Tomi; Ricci, Laurent

    2011-01-01

    Product configuration systems play an important role in the development of Mass Customisation. The configuration of complex product families may nowadays involve multiple design disciplines, e.g. hardware, software and services. In this paper, we present a conceptual approach for modelling...... the variability in such heterogeneous product families. Our approach is based on a framework that aims to cater for the different stakeholders involved in the modelling and management of the product family. The modelling approach is centred around the concepts of views, types and constraints and is illustrated...... by a motivation example. Furthermore, as a proof of concept, a prototype has been implemented for configuring a non-trivial heterogeneous product family....

  8. Al-Anon family groups' newcomers and members: Concerns about the drinkers in their lives.

    Science.gov (United States)

    Timko, Christine; Cronkite, Ruth; Laudet, Alexandre; Kaskutas, Lee Ann; Roth, Jeffrey; Moos, Rudolf H

    2014-01-01

    Despite Al-Anon's widespread availability and use, knowledge is lacking about the drinkers in attendees' lives. We filled this gap by describing and comparing Al-Anon newcomers' and members' reports about their "main drinker" (main person prompting initial attendance). Al-Anon's World Service Office mailed a random sample of groups, yielding completed surveys from newcomers (N = 362) and stable members (N = 265). Newcomers' and members' drinkers generally were comparable. They had known their drinker for an average of 22 years and been concerned about his or her's drinking for 9 years; about 50% had daily contact with the drinker. Most reported negative relationship aspects (drinker gets on your nerves; you disagree about important things). Newcomers had more concern about the drinker's alcohol use than members did, and were more likely to report their drinkers' driving under the influence. Drinkers' most frequent problem due to drinking was family arguments, and most common source of help was 12-step groups, with lower rates among drinkers of newcomers. Concerns spurring initial Al-Anon attendance were the drinker's poor quality of life, relationships, and psychological status; goals for initial attendance reflected these concerns. The drinker's alcohol use was of less concern in prompting initial Al-Anon attendance, and, accordingly, the drinker's reduced drinking was a less frequently endorsed goal of attendance. Family treatments for substance use problems might expand interventions and outcome domains beyond abstinence and relationship satisfaction to include the drinker's quality of life and psychological symptoms and in turn relieve concerns of family members. © American Academy of Addiction Psychiatry.

  9. From animal models to human disease: a genetic approach for personalized medicine in ALS.

    Science.gov (United States)

    Picher-Martel, Vincent; Valdmanis, Paul N; Gould, Peter V; Julien, Jean-Pierre; Dupré, Nicolas

    2016-07-11

    Amyotrophic Lateral Sclerosis (ALS) is the most frequent motor neuron disease in adults. Classical ALS is characterized by the death of upper and lower motor neurons leading to progressive paralysis. Approximately 10 % of ALS patients have familial form of the disease. Numerous different gene mutations have been found in familial cases of ALS, such as mutations in superoxide dismutase 1 (SOD1), TAR DNA-binding protein 43 (TDP-43), fused in sarcoma (FUS), C9ORF72, ubiquilin-2 (UBQLN2), optineurin (OPTN) and others. Multiple animal models were generated to mimic the disease and to test future treatments. However, no animal model fully replicates the spectrum of phenotypes in the human disease and it is difficult to assess how a therapeutic effect in disease models can predict efficacy in humans. Importantly, the genetic and phenotypic heterogeneity of ALS leads to a variety of responses to similar treatment regimens. From this has emerged the concept of personalized medicine (PM), which is a medical scheme that combines study of genetic, environmental and clinical diagnostic testing, including biomarkers, to individualized patient care. In this perspective, we used subgroups of specific ALS-linked gene mutations to go through existing animal models and to provide a comprehensive profile of the differences and similarities between animal models of disease and human disease. Finally, we reviewed application of biomarkers and gene therapies relevant in personalized medicine approach. For instance, this includes viral delivering of antisense oligonucleotide and small interfering RNA in SOD1, TDP-43 and C9orf72 mice models. Promising gene therapies raised possibilities for treating differently the major mutations in familial ALS cases.

  10. A Fruitful Endeavor: Modeling ALS in the Fruit Fly

    Science.gov (United States)

    Casci, Ian; Pandey, Udai Bhan

    2014-01-01

    For over a century Drosophila melanogaster, commonly known as the fruit fly, has been instrumental in genetics research and disease modeling. In more recent years, it has been a powerful tool for modeling and studying neurodegenerative diseases, including the devastating and fatal amyotrophic lateral sclerosis (ALS). The success of this model organism in ALS research comes from the availability of tools to manipulate gene/protein expression in a number of desired cell-types, and the subsequent recapitulation of cellular and molecular phenotypic features of the disease. Several Drosophila models have now been developed for studying the roles of ALS-associated genes in disease pathogenesis that allowed us to understand the molecular pathways that lead to motor neuron degeneration in ALS patients. Our primary goal in this review is to highlight the lessons we have learned using Drosophila models pertaining to ALS research. PMID:25289585

  11. Adolescents Family Models : A Cross-Cultural Study

    OpenAIRE

    Mayer, Boris

    2009-01-01

    This study explores and compares the family models of adolescents across ten cultures using a typological and multilevel approach. Thereby, it aims to empirically contribute to Kagitcibasi s (2007) theory of family change. This theory postulates the existence of three ideal-typical family models across cultures: a family model of independence prevailing in Western societies, a family model of (total) interdependence prevailing in non-industrialized agrarian cultures, and as a synthesis of the...

  12. Modeling of TiAl Alloy Grating by Investment Casting

    OpenAIRE

    Yi Jia; Shulong Xiao; Jing Tian; Lijuan Xu; Yuyong Chen

    2015-01-01

    The investment casting of TiAl alloys has become the most promising cost-effective technique for manufacturing TiAl components. This study aimed to investigate a series of problems associated with the investment casting of TiAl alloys. The mold filling and solidification of this casting model were numerically simulated using ProCAST. Shrinkage porosity was quantitatively predicted by a built-in feeding criterion. The results obtained from the numerical simulations were compared with experimen...

  13. Autism Treatment and Family Support Models Review

    Directory of Open Access Journals (Sweden)

    Mehrnoush Esbati

    2009-04-01

    Full Text Available Autism is a lifelong neurological disability of unknown etiology. The criteria for a diagnosis of autism are based on a triad of impairments in social interaction, communication and a lack of flexibility in thinking and behavior There are several factors which are likely to contribute to this variation including the definition of autism and variability in diagnosis amongst professionals, however anecdotally there appears to have been a steadily increasing demand for services. The purpose of this review of research literature relating to the management and treatment of children with autism is to identify the most effective models of best practice. The review includes Comparative evidence supporting a range of treatment and intervention models, across the range of individuals included within autism spectrum disorders, psychodynamic treatment/management which are based on the assumption that autism is the result of emotional damage to the child, usually because of failure to develop a close attachment to parents, especially the mother, biological treatments, educational and behavioral interventions, communication therapies, cost benefits and supporting families.The research is examined for evidence to support best practice models in supporting families at the time of diagnosis and assessment and an overview of the nature of comprehensive supports that help reduce stresses that may be experienced by families of a child with autism and promote inclusion in community activities.

  14. A Model of Family Background, Family Process, Youth Self-Control, and Delinquent Behavior in Two-Parent Families

    Science.gov (United States)

    Jeong, So-Hee; Eamon, Mary Keegan

    2009-01-01

    Using data from a national sample of two-parent families with 11- and 12-year-old youths (N = 591), we tested a structural model of family background, family process (marital conflict and parenting), youth self-control, and delinquency four years later. Consistent with the conceptual model, marital conflict and youth self-control are directly…

  15. PREDICTIVE CAPACITY OF ARCH FAMILY MODELS

    Directory of Open Access Journals (Sweden)

    Raphael Silveira Amaro

    2016-03-01

    Full Text Available In the last decades, a remarkable number of models, variants from the Autoregressive Conditional Heteroscedastic family, have been developed and empirically tested, making extremely complex the process of choosing a particular model. This research aim to compare the predictive capacity, using the Model Confidence Set procedure, than five conditional heteroskedasticity models, considering eight different statistical probability distributions. The financial series which were used refers to the log-return series of the Bovespa index and the Dow Jones Industrial Index in the period between 27 October 2008 and 30 December 2014. The empirical evidences showed that, in general, competing models have a great homogeneity to make predictions, either for a stock market of a developed country or for a stock market of a developing country. An equivalent result can be inferred for the statistical probability distributions that were used.

  16. A model of adaptation for families of elderly patients with dementia: focusing on family resilience.

    Science.gov (United States)

    Kim, Geun Myun; Lim, Ji Young; Kim, Eun Joo; Kim, Sang Suk

    2017-07-19

    We constructed a model explaining families' positive adaptation in chronic crisis situations such as the problematic behavior of elderly patients with dementia and attendant caregiving stress, based on the family resilience model. Our aim was to devise an adaptation model for families of elderly patients with dementia. A survey of problematic behavior in elderly patients with dementia, family stress, family resilience, and family adaptation was conducted with 292 consenting individuals. The collected data were analyzed using structural equation modeling. The communication process, family stress, and problematic behavior of elderly patients with dementia had direct and indirect effects on family adaptation, while belief system, organization pattern, and social support had indirect effects. Specifically, family stress and more severe problematic behavior by elderly patients with dementia negatively influenced family adaptation, while greater family resilience improved such adaptation. Interventions aiming to enhance family resilience, based on the results of this study, are required to help families with positive adaptation. Such family programs might involve practical support such as education on the characteristics of elderly persons with dementia and coping methods for their problematic behavior; forming self-help groups for families; revitalizing communication within families; and activating communication channels with experts.

  17. Two families of astrophysical diverging lens models

    Science.gov (United States)

    Er, Xinzhong; Rogers, Adam

    2018-03-01

    In the standard gravitational lensing scenario, rays from a background source are bent in the direction of a foreground lensing mass distribution. Diverging lens behaviour produces deflections in the opposite sense to gravitational lensing, and is also of astrophysical interest. In fact, diverging lensing due to compact distributions of plasma has been proposed as an explanation for the extreme scattering events that produce frequency-dependent dimming of extragalactic radio sources, and may also be related to the refractive radio wave phenomena observed to affect the flux density of pulsars. In this work we study the behaviour of two families of astrophysical diverging lenses in the geometric optics limit, the power law, and the exponential plasma lenses. Generally, the members of these model families show distinct behaviour in terms of image formation and magnification, however the inclusion of a finite core for certain power-law lenses can produce a caustic and critical curve morphology that is similar to the well-studied Gaussian plasma lens. Both model families can produce dual radial critical curves, a novel distinction from the tangential distortion usually produced by gravitational (converging) lenses. The deflection angle and magnification of a plasma lens vary with the observational frequency, producing wavelength-dependent magnifications that alter the amplitudes and the shape of the light curves. Thus, multiwavelength observations can be used to physically constrain the distribution of the electron density in such lenses.

  18. A structural model of family empowerment for families of children with special needs.

    Science.gov (United States)

    Han, Kuem Sun; Yang, Yunkyung; Hong, Yeong Seon

    2018-03-01

    To explain and predict family empowerment in families of children with special needs. Family empowerment of families of children with special needs can be explained using the Double ABCX model. Although constant stressors such as parenting stress and family demands can have negative effects on family empowerment, family resources and parenting efficacy can mediate the negative effect through effective coping strategies. A cross-sectional research design was employed. A survey was conducted with 240 parents of children with special needs. Upon exclusion of four responses deemed inadequate to the statistics process, 236 responses were selected for the analysis. Based on the items used in the previous research, we used the scale of family demands 38, the scale of parenting stress 24, the scale of parenting efficacy 37, the scale of pattern of organisation 30, the scale of communication process 16 and the scale of family empowerment 32. In families of children with special needs, parenting stress had a negative effect on parenting efficacy and family resources, namely, pattern of organisation and communication process. Family needs had a positive effect on parenting efficacy. Parenting stress and family demands influenced family empowerment through parenting efficacy and family resources (pattern of organisation and communication process), while parenting efficacy contributed to family empowerment. This study empirically analysed the usefulness of the Double ABCX model in predicting family empowerment. Family resource factors (organisation pattern and communication process) and perception or judgement factors (such as parenting efficacy) were found to mediate the negative impact of various stressors experienced by families of children with special needs. The study findings suggest that clinical practice and management should focus on providing efficient intervention methods to lower stress in families of children with special needs. Reinforcing factors contributing to

  19. Modeling of TiAl Alloy Grating by Investment Casting

    Directory of Open Access Journals (Sweden)

    Yi Jia

    2015-12-01

    Full Text Available The investment casting of TiAl alloys has become the most promising cost-effective technique for manufacturing TiAl components. This study aimed to investigate a series of problems associated with the investment casting of TiAl alloys. The mold filling and solidification of this casting model were numerically simulated using ProCAST. Shrinkage porosity was quantitatively predicted by a built-in feeding criterion. The results obtained from the numerical simulations were compared with experiments, which were carried out on Vacuum Skull Furnace using an investment block mold. The investment casting of TiAl grating was conducted for verifying the correctness and feasibility of the proposed method. The tensile test results indicated that, at room temperature, the tensile strength and elongation were approximately 675 MPa and 1.7%, respectively. The microstructure and mechanical property of the investment cast TiAl alloy were discussed.

  20. Organizational Model of the Southern Asia Cluster Family Businesses

    Directory of Open Access Journals (Sweden)

    Vipin Gupta

    2013-07-01

    Full Text Available Recently, there has been an increased interest in the family business organization. Traditionally, the ideal typical organizational model was one where the management, governance, and ownership entities are kept separate. This principal agent model has been a subject of public debate in the wake of several corporate scandals. In the family business organization, significant management, governance and ownership is often with the members of a family & its trusted partners. It is common in the US to regulate the management, governance, and ownership roles of the family members by using competitive criteria for the involvement of different members. In Southern Asia cluster (Gupta & Hanges, 2004, on the other hand, it is quite common for the family involvement to be holistic and undivided, where the family collectively owns the shares in the family business. In this work, this organizational model of the Southern Asian family businesses is investigated. Keywords: Southern Asia, family business, organizational model

  1. 26Al yields from rotating Wolf--Rayet star models

    OpenAIRE

    Vuissoz, C.; Meynet, G.; Knoedlseder, J.; Cervino, M.; Schaerer, D.; Palacios, A.; Mowlavi, N.

    2003-01-01

    We present new $^{26}$Al stellar yields from rotating Wolf--Rayet stellar models which, at solar metallicity, well reproduce the observed properties of the Wolf-Rayet populations. These new yields are enhanced with respect to non--rotating models, even with respect to non--rotating models computed with enhanced mass loss rates. We briefly discuss some implications of the use of these new yields for estimating the global contribution of Wolf-Rayet stars to the quantity of $^{26}$Al now present...

  2. Blood-CNS Barrier Impairment in ALS Patients versus an Animal Model

    Directory of Open Access Journals (Sweden)

    Svitlana eGarbuzova-Davis

    2014-02-01

    Full Text Available Amyotrophic lateral sclerosis (ALS is a severe neurodegenerative disease with a compli-cated and poorly understood pathogenesis. Recently, alterations in the blood-Central Nervous System barrier (B-CNS-B have been recognized as a key factor possibly aggravating motor neuron damage. The majority of findings on ALS microvascular pathology have been deter-mined in mutant SOD1 rodent models, identifying barrier damage during disease develop-ment which might similarly occur in familial ALS patients carrying the SOD1 mutation. However, our knowledge of B-CNS-B competence in sporadic ALS (SALS has been limited. We recently showed structural and functional impairment in postmortem gray and white mat-ter microvessels of medulla and spinal cord tissue from SALS patients, suggesting pervasive barrier damage. Although numerous signs of barrier impairment (endothelial cell degenera-tion, capillary leakage, perivascular edema, downregulation of tight junction proteins, and microhemorrhages are indicated in both mutant SOD1 animal models of ALS and SALS pa-tients, other pathogenic barrier alterations have as yet only been identified in SALS patients. Pericyte degeneration, perivascular collagen IV expansion, and white matter capillary abnor-malities in SALS patients are significant barrier related pathologies yet to be noted in ALS SOD1 animal models. In the current review, these important differences in blood-CNS barrier damage between ALS patients and animal models, which may signify altered barrier transport mechanisms, are discussed. Understanding discrepancies in barrier condition between ALS patients and animal models may be crucial for developing effective therapies.

  3. An Application of Satir's Model to Family Counseling.

    Science.gov (United States)

    Seligman, Linda

    1981-01-01

    Describes the use of Virginia Satir's model to family counseling, emphasizing prevention, personal growth, self-esteem, and communication in improving the functioning of the family system. Presents a case study using the model. Results indicate the family became more nurturing as a result of counseling. (JAC)

  4. Economic Disadvantage in Complex Family Systems: Expansion of Family Stress Models

    Science.gov (United States)

    Barnett, Melissa A.

    2008-01-01

    Economic disadvantage is associated with multiple risks to early socioemotional development. This article reviews research regarding family stress frameworks to model the pathways from economic disadvantage to negative child outcomes via family processes. Future research in this area should expand definitions of family and household to incorporate…

  5. Family Economic Pressure and Adolescent Suicidal Ideation: Application of the Family Stress Model

    Science.gov (United States)

    Yoder, Kevin A.; Hoyt, Dan R.

    2005-01-01

    This study used a sample of 501 families from the Mississippi Delta region to examine the feasibility of the Family Stress Model for understanding adolescent suicidal ideation. The results indicated that family economic pressure was related to parental depressive symptoms, which, in turn, was related to parental hostile behavior and physical…

  6. Capturing the Family Context of Emotion Regulation: A Family Systems Model Comparison Approach

    Science.gov (United States)

    Fosco, Gregory M.; Grych, John H.

    2013-01-01

    Several dimensions of family functioning are recognized as formative influences on children's emotion regulation. Historically, they have been studied separately, limiting our ability to understand how they function within the family system. The present investigation tested models including family emotional climate, interparental conflict, and…

  7. Family Environment and Cognitive Development: Twelve Analytic Models

    Science.gov (United States)

    Walberg, Herbert J.; Marjoribanks, Kevin

    1976-01-01

    The review indicates that refined measures of the family environment and the use of complex statistical models increase the understanding of the relationships between socioeconomic status, sibling variables, family environment, and cognitive development. (RC)

  8. Modeling Family Adaptation to Fragile X Syndrome

    Science.gov (United States)

    Raspa, Melissa; Bailey, Donald, Jr.; Bann, Carla; Bishop, Ellen

    2014-01-01

    Using data from a survey of 1,099 families who have a child with Fragile X syndrome, we examined adaptation across 7 dimensions of family life: parenting knowledge, social support, social life, financial impact, well-being, quality of life, and overall impact. Results illustrate that although families report a high quality of life, they struggle…

  9. Family boundary characteristics, work-family conflict and life satisfaction: A moderated mediation model.

    Science.gov (United States)

    Qiu, Lin; Fan, Jinyan

    2015-10-01

    Although work-family border and boundary theory suggest individuals' boundary characteristics influence their work-family relationship, it is largely unknown how boundary flexibility and permeability mutually influence work-family conflict and subsequent employee outcomes. Moreover, the existing work-family conflict research has been mainly conducted in the United States and other Western countries. To address these gaps in the work-family literature, the present study examines a moderated mediation model regarding how family boundary characteristics may influence individuals' work-family conflict and life satisfaction with a sample of 278 Chinese full-time employees. Results showed that employees' family flexibility negatively related to their perceived work interference with family (WIF) and family interference with work (FIW), and both these two relationships were augmented by individuals' family permeability. In addition, WIF mediated the relationship between family flexibility and life satisfaction; the indirect effect of family flexibility on life satisfaction via WIF was stronger for individuals with higher family permeability. The theoretical and managerial implications of these findings are discussed. © 2014 International Union of Psychological Science.

  10. A VERSATILE FAMILY OF GALACTIC WIND MODELS

    Energy Technology Data Exchange (ETDEWEB)

    Bustard, Chad; Zweibel, Ellen G. [Physics Department, University of Wisconsin-Madison, 1150 University Avenue, Madison, WI 53706 (United States); D’Onghia, Elena, E-mail: bustard@wisc.edu [Department of Astronomy, University of Wisconsin-Madison, 2535 Sterling Hall, 475 N. Charter Street, Madison, WI 53706 (United States)

    2016-03-01

    We present a versatile family of model galactic outflows including non-uniform mass and energy source distributions, a gravitational potential from an extended mass source, and radiative losses. The model easily produces steady-state wind solutions for a range of mass-loading factors, energy-loading factors, galaxy mass, and galaxy radius. We find that, with radiative losses included, highly mass-loaded winds must be driven at high central temperatures, whereas low mass-loaded winds can be driven at low temperatures just above the peak of the cooling curve, meaning radiative losses can drastically affect the wind solution even for low mass-loading factors. By including radiative losses, we are able to show that subsonic flows can be ignored as a possible mechanism for expelling mass and energy from a galaxy compared to the more efficient transonic solutions. Specifically, the transonic solutions with low mass loading and high energy loading are the most efficient. Our model also produces low-temperature, high-velocity winds that could explain the prevalence of low-temperature material in observed outflows. Finally, we show that our model, unlike the well-known Chevalier and Clegg model, can reproduce the observed linear relationship between wind X-ray luminosity and star formation rate (SFR) over a large range of SFR from 1–1000 M{sub ⊙} yr{sup −1} assuming the wind mass-loading factor is higher for low-mass, and hence, low-SFR galaxies. We also constrain the allowed mass-loading factors that can fit the observed X-ray luminosity versus SFR trend, further suggesting an inverse relationship between mass loading and SFR as explored in advanced numerical simulations.

  11. An Improved Model for FE Modeling and Simulation of Closed Cell Al-Alloy Foams

    OpenAIRE

    Hasan, MD. Anwarul

    2010-01-01

    Cell wall material properties of Al-alloy foams have been derived by a combination of nanoindentation experiment and numerical simulation. Using the derived material properties in FE (finite element) modeling of foams, the existing constitutive models of closed-cell Al-alloy foams have been evaluated against experimental results. An improved representative model has been proposed for FE analysis of closed-cell Al-alloy foams. The improved model consists of a combination of spherical and cruci...

  12. Modeling the neuroanatomic propagation of ALS in the spinal cord

    Science.gov (United States)

    Drawert, Brian; Thakore, Nimish; Mitchell, Brian; Pioro, Erik; Ravits, John; Petzold, Linda R.

    2017-07-01

    Recent hypotheses of amyotrophic lateral sclerosis (ALS) progression have posited a point-source origin of motor neuron death with neuroanatomic propagation either contiguously to adjacent regions, or along networks via axonal and synaptic connections. Although the molecular mechanisms of propagation are unknown, one leading hypothesis is a "prion-like" spread of misfolded and aggregated proteins, including SOD1 and TDP-43. We have developed a mathematical model representing cellular and molecular spread of ALS in the human spinal cord. Our model is based on the stochastic reaction-diffusion master equation approach using a tetrahedral discretized space to capture the complex geometry of the spinal cord. Domain dimension and shape was obtained by reconstructing human spinal cord from high-resolution magnetic resonance (MR) images and known gross and histological neuroanatomy. Our preliminary results qualitatively recapitulate the clinically observed pattern of spread of ALS thorough the spinal cord.

  13. Modelling the effects of penetrance and family size on rates of sporadic and familial disease.

    Science.gov (United States)

    Al-Chalabi, Ammar; Lewis, Cathryn M

    2011-01-01

    Many complex diseases show a diversity of inheritance patterns ranging from familial disease, manifesting with autosomal dominant inheritance, through to simplex families in which only one person is affected, manifesting as apparently sporadic disease. The role of ascertainment bias in generating apparent patterns of inheritance is often overlooked. We therefore explored the role of two key parameters that influence ascertainment, penetrance and family size, in rates of observed familiality. We develop a mathematical model of familiality of disease, with parameters for penetrance, mutation frequency and family size, and test this in a complex disease: amyotrophic lateral sclerosis. Monogenic, high-penetrance variants can explain patterns of inheritance in complex diseases and account for a large proportion of those with no apparent family history. With current demographic trends, rates of familiality will drop further. For example, a variant with penetrance 0.5 will cause apparently sporadic disease in 12% of families of size 10, but 80% of families of size 1. A variant with penetrance 0.9 has only an 11% chance of appearing sporadic in families of a size similar to those of Ireland in the past, compared with 57% in one-child families like many in China. These findings have implications for genetic counselling, disease classification and the design of gene-hunting studies. The distinction between familial and apparently sporadic disease should be considered artificial. Copyright © 2011 S. Karger AG, Basel.

  14. Families of Children with Chronic Illness and the Relational Family Model

    Directory of Open Access Journals (Sweden)

    Tanja Pate

    2016-09-01

    Full Text Available Families of children with chronic illness experience persistent stress. Facing the diagnosis and learning how to cope with it is a stressful experience not only for the child but also for the parents and for the whole family. The illness, with its unpredictability and treatment, disturbs their daily routine and threatens the whole family system. Parental involvement in the child’s disease management and their emotional support are crucial for effective coping and adaptation to the child’s chronic illness. The aim of this article is to present the importance of the parental role in these families through theoretical findings of the relational family model.

  15. The Gendered Family Process Model: An Integrative Framework of Gender in the Family.

    Science.gov (United States)

    Endendijk, Joyce J; Groeneveld, Marleen G; Mesman, Judi

    2018-05-01

    This article reviews and integrates research on gender-related biological, cognitive, and social processes that take place in or between family members, resulting in a newly developed gendered family process (GFP) model. The GFP model serves as a guiding framework for research on gender in the family context, calling for the integration of biological, social, and cognitive factors. Biological factors in the model are prenatal, postnatal, and pubertal androgen levels of children and parents, and genetic effects on parent and child gendered behavior. Social factors are family sex composition (i.e., parent sex, sexual orientation, marriage status, sibling sex composition) and parental gender socialization, such as modeling, gender-differentiated parenting, and gender talk. Cognitive factors are implicit and explicit gender-role cognitions of parents and children. Our review and the GFP model confirm that gender is an important organizer of family processes, but also highlight that much is still unclear about the mechanisms underlying gender-related processes within the family context. Therefore, we stress the need for (1) longitudinal studies that take into account the complex bidirectional relationship between parent and child gendered behavior and cognitions, in which within-family comparisons (comparing behavior of parents toward a boy and a girl in the same family) are made instead of between-family comparisons (comparing parenting between all-boy families and all-girl families, or between mixed-gender families and same-gender families), (2) experimental studies on the influence of testosterone on human gender development, (3) studies examining the interplay between biology with gender socialization and gender-role cognitions in humans.

  16. Modeling familial clustered breast cancer using published data

    NARCIS (Netherlands)

    Jonker, MA; Jacobi, CE; Hoogendoorn, WE; Nagelkerke, NJD; de Bock, GH; van Houwelingen, JC

    2003-01-01

    The purpose of this research was to model the familial clustering of breast cancer and to provide an accurate risk estimate for individuals from the general population, based on their family history of breast and ovarian cancer. We constructed a genetic model as an extension of a model by Claus et

  17. Towards an elastic model of wurtzite AlN nanowires

    International Nuclear Information System (INIS)

    Mitrushchenkov, A; Chambaud, G; Yvonnet, J; He, Q-C

    2010-01-01

    Starting with ab initio calculations of AlN wurtzite [0001] nanowires with diameters up to 4 nm, a finite element method is developed to deal with larger nanostructures/nanoparticles. The ab initio calculations show that the structure of the nanowires can be well represented by an internal part with AlN bulk elastic properties, and one atomic surface layer with its own elastic behavior. The proposed finite element method includes surface elements with their own elastic properties using surface elastic coefficients deduced from the ab initio calculations. The elastic properties obtained with the finite element model compare very well with those obtained with the full ab initio calculations.

  18. Invisible players: a family systems model.

    Science.gov (United States)

    Hellstedt, Jon

    2005-10-01

    This article attempts to demonstrate that the family is a key player in the athlete's development and performance, sometimes invisible, but often all too visible. The practice of clinical sport psychology is enriched by a family-based orientation to the assessment and treatment of athletes. Creating a workable family system is a challenge for parents. They have many difficult decisions to make, and are often without support and direction in making those choices. Sport psychiatrists and psychologists can be helpful to parents as well as athletes by using family-based assessments and treatment interventions that provide education, challenge, and support as they negotiate the tasks and transitions in the family life cycle.

  19. 78 FR 69932 - Tedesco Family ESB Trust, et al.-Purchase of Certain Assets and Membership Interests-Evergreen...

    Science.gov (United States)

    2013-11-21

    ... Trails, Inc. d/b/a Horizon Coach Lines, et al. AGENCY: Surface Transportation Board, DOT. ACTION: Notice... Franmar's purchase of certain motor coach and non- motor coach assets of Evergreen Trails, Inc. d/b/a... (Family Trust), on behalf of Franmar Leasing, Inc. (Franmar), together with the Francis Tedesco Revocable...

  20. A family systems-based model of organizational intervention.

    Science.gov (United States)

    Shumway, Sterling T; Kimball, Thomas G; Korinek, Alan W; Arredondo, Rudy

    2007-04-01

    Employee assistance professionals are expected to be proficient at intervening in organizations and creating meaningful behavioral change in interpersonal functioning. Because of their training in family systems theories and concepts, marriage and family therapists (MFTs) are well suited to serve organizations as "systems consultants." Unfortunately, the authors were unable to identify any family systems-based models for organizational intervention that have been empirically tested and supported. In this article, the authors present a family systems-based model of intervention that they developed while working in an employee assistance program (EAP). They also present research that was used to refine the model and to provide initial support for its effectiveness.

  1. Risk Management for Ag Families: An Extension Model for Improving Family Business Success

    OpenAIRE

    Bastian, Christopher T.; Nagler, Amy M.; Hewlett, John P.; Weigel, Randolph R.

    2006-01-01

    A risky business environment for agricultural producers coupled with human risk elements unique to family businesses, points to the need for extension programs that integrate traditional risk management concepts into curriculums focused on the potentially unique educational needs of family farm management teams. Results in this paper indicate that a multi-state, grant funded program entitled "Risk Management for Ag Families" had impact and provides a model that traditional risk management edu...

  2. The general dynamic model of island biogeography revisited on the level of major plant families

    DEFF Research Database (Denmark)

    Lenzner, Bernd; Beierkuhnlein, Carl; Patrick, Weigelt

    2017-01-01

    Aim: The general dynamic model (GDM) proposed by Whittaker et al. (2008) is a widely accepted theoretical framework in island biogeography. In this study, we explore whether GDM predictions hold when overall plant diversity is deconstructed into major plant families. Location: 101 islands from 14...... oceanic archipelagos worldwide. Methods: Occurrence data for all species of nine large, cosmopolitan flowering plant families were used to test predictions derived from the GDM. We analyzed the effects of island area and age on species richness as well as number and percentage of single-island endemic...... species per family using mixed-effect models. Results: Total species and endemic richness as well as the percentage of endemic species showed a hump-shaped relationship with island age. The overall pattern was mainly driven by few species-rich plant families. Varying patterns were found for individual...

  3. Thermodynamic modeling of the Mg-Al-Ca system

    Energy Technology Data Exchange (ETDEWEB)

    Janz, A.; Groebner, J. [Clausthal University of Technology, Institute of Metallurgy, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany); Cao, H.; Zhu, J.; Chang, Y.A. [Department of Materials Science and Engineering, University of Wisconsin, 1509 University Ave., Madison, WI 53706 (United States); Schmid-Fetzer, R. [Clausthal University of Technology, Institute of Metallurgy, Robert-Koch-Str. 42, D-38678 Clausthal-Zellerfeld (Germany)], E-mail: schmid-fetzer@tu-clausthal.de

    2009-02-15

    A thermodynamic model has been developed that provides a quantitative description for a wide area of the Mg-Al-Ca system. All available experimental data plus new key experiments using differential scanning calorimetry/differential thermal analysis have been considered to create a dataset which reproduces the primary crystallizing phases, the extensive ternary solubilities of binary phases and the ternary C36 Laves phase. This enables validated thermodynamic calculations in various areas of this ternary system.

  4. Magnetic and noncentrosymmetric Weyl fermion semimetals in the R AlGe family of compounds (R =rare earth )

    Science.gov (United States)

    Chang, Guoqing; Singh, Bahadur; Xu, Su-Yang; Bian, Guang; Huang, Shin-Ming; Hsu, Chuang-Han; Belopolski, Ilya; Alidoust, Nasser; Sanchez, Daniel S.; Zheng, Hao; Lu, Hong; Zhang, Xiao; Bian, Yi; Chang, Tay-Rong; Jeng, Horng-Tay; Bansil, Arun; Hsu, Han; Jia, Shuang; Neupert, Titus; Lin, Hsin; Hasan, M. Zahid

    2018-01-01

    Weyl semimetals are novel topological conductors that host Weyl fermions as emergent quasiparticles. In this Rapid Communication, we propose a new type of Weyl semimetal state that breaks both time-reversal symmetry and inversion symmetry in the R AlGe (R =rare -earth ) family. Compared to previous predictions of magnetic Weyl semimetal candidates, the prediction of Weyl nodes in R AlGe is more robust and less dependent on the details of the magnetism because the Weyl nodes are generated already by the inversion breaking and the ferromagnetism acts as a simple Zeeman coupling that shifts the Weyl nodes in k space. Moreover, R AlGe offers remarkable tunability, which covers all varieties of Weyl semimetals including type I, type II, inversion breaking, and time-reversal breaking, depending on a suitable choice of the rare-earth elements. Furthermore, the unique noncentrosymmetric and ferromagnetic Weyl semimetal state in R AlGe enables the generation of spin currents.

  5. Socioeconomic status and parenting in ethnic minority families: testing a minority family stress model.

    Science.gov (United States)

    Emmen, Rosanneke A G; Malda, Maike; Mesman, Judi; van Ijzendoorn, Marinus H; Prevoo, Mariëlle J L; Yeniad, Nihal

    2013-12-01

    According to the family stress model (Conger & Donnellan, 2007), low socioeconomic status (SES) predicts less-than-optimal parenting through family stress. Minority families generally come from lower SES backgrounds than majority families, and may experience additional stressors associated with their minority status, such as acculturation stress. The primary goal of this study was to test a minority family stress model with a general family stress pathway, as well as a pathway specific to ethnic minority families. The sample consisted of 107 Turkish-Dutch mothers and their 5- to 6-year-old children, and positive parenting was observed during a 7-min problem-solving task. In addition, mothers reported their daily hassles, psychological distress, and acculturation stress. The relation between SES and positive parenting was partially mediated by both general maternal psychological stress and maternal acculturation stress. Our study contributes to the argument that stressors specific to minority status should be considered in addition to more general demographic and family stressors in understanding parenting behavior in ethnic minority families.

  6. Mathematical Models of the Sinusoidal Screen Family

    Directory of Open Access Journals (Sweden)

    Tajana Koren

    2011-06-01

    Full Text Available In this paper we will define a family of sinusoidal screening elements and explore the possibilities of their application in graphic arts, securities printing and design solutions in photography and typography editing. For this purpose mathematical expressions of sinusoidal families were converted into a Postscript language. The introduction of a random variable results in a countless number of various mutations which cannot be repeated without knowing the programming code itself. The use of the family of screens in protection of securities is thus of great importance. Other possible application of modulated sinusoidal screens is related to the large format color printing. This paper will test the application of sinusoidal screens in vector graphics, pixel graphics and typography. The development of parameters in the sinusoidal screen element algorithms gives new forms defined within screening cells with strict requirements of coverage implementation. Individual solutions include stochastic algorithms, as well as the autonomy of screening forms in regard to multicolor printing channels.

  7. Topic models: A novel method for modeling couple and family text data

    Science.gov (United States)

    Atkins, David C.; Rubin, Tim N.; Steyvers, Mark; Doeden, Michelle A.; Baucom, Brian R.; Christensen, Andrew

    2012-01-01

    Couple and family researchers often collect open-ended linguistic data – either through free response questionnaire items or transcripts of interviews or therapy sessions. Because participant's responses are not forced into a set number of categories, text-based data can be very rich and revealing of psychological processes. At the same time it is highly unstructured and challenging to analyze. Within family psychology analyzing text data typically means applying a coding system, which can quantify text data but also has several limitations, including the time needed for coding, difficulties with inter-rater reliability, and defining a priori what should be coded. The current article presents an alternative method for analyzing text data called topic models (Steyvers & Griffiths, 2006), which has not yet been applied within couple and family psychology. Topic models have similarities with factor analysis and cluster analysis in that topic models identify underlying clusters of words with semantic similarities (i.e., the “topics”). In the present article, a non-technical introduction to topic models is provided, highlighting how these models can be used for text exploration and indexing (e.g., quickly locating text passages that share semantic meaning) and how output from topic models can be used to predict behavioral codes or other types of outcomes. Throughout the article a collection of transcripts from a large couple therapy trial (Christensen et al., 2004) is used as example data to highlight potential applications. Practical resources for learning more about topic models and how to apply them are discussed. PMID:22888778

  8. A STUDY ON THE SUCCESSION MODEL OF FAMILY BUSINESSS

    OpenAIRE

    Hung-Jung Chang; Szu-Ju Lin

    2011-01-01

    Family business has to face issues such as ownership issue, governance structure issue and succession issue, etc. in enterprise development history. Among them, the succession issue is an important transition point in enterprise’s survival and development. It is thus thought of as one of the most important strategic and decision making issues in the enterprise. This article aims at investigating the succession model of Family business. First, reviews are done on the meaning of Family business...

  9. The Family Alliance Model: A Way to Study and Characterize Early Family Interactions

    Directory of Open Access Journals (Sweden)

    Nicolas Favez

    2017-08-01

    Full Text Available The aim of this paper is to present the family alliance (FA model, which is designed to conceptualize the relational dynamics in the early family. FA is defined as the coordination a family can reach when fulfilling a task, such as playing a game or having a meal. According to the model, being coordinated as a family depends on four interactive functions: participation (all members are included, organization (members assume differentiated roles, focalization (family shares a common theme of activity, affect sharing (there is empathy between members. The functions are operationalized through the spatiotemporal characteristics of non-verbal interactions: for example, distance between the partners, orientation of their bodies, congruence within body segments, signals of readiness to interact, joint attention, facial expressions. Several standardized observational situations have been designed to assess FA: The Lausanne Trilogue Play (with its different versions, in which mother, father, and baby interact in all possible configurations of a triad, and the PicNic Game for families with several children. Studies in samples of non-referred and referred families (for infant or parental psychopathology have highlighted different types of FA: disorganized, conflicted, and cooperative. The type of FA in a given family is stable through the first years and is predictive of developmental outcomes in children, such as psychofunctional symptoms, understanding of complex emotions, and Theory of Mind development.

  10. [Children in family mediation: A practice model].

    Science.gov (United States)

    Mayer, Stefan; Normann, Katrin

    2006-01-01

    The authors briefly describe the history of family mediation under the perspective of the role of the children in the process of mediation. They state that originally children were not directly included. But through empirical studies and different higher escalated families asking for help by mediation, the inclusion of children got an important issue in theory and practice. The discussion began with the question in which phases of the mediation process the children should be included - it went to the issue of the age of the children - and the authors propose to take the amount of escalation in the family as the most important point of reference to decide if and how the children should be included. They suggest to diagnose the loss of responsibility and autonomy of the parents on a nine level scale (from F. Glasl) with the parents and to decide and negotiate with them how the children will be included. They describe five different settings of inclusion of the children.

  11. Symbolic Game Semantics for Model Checking Program Families

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar

    2016-01-01

    represent program families with infinite integers as so-called (finite-state) featured symbolic automata. Specifically designed model checking algorithms are then employed to verify safety of all programs from a family at once and pinpoint those programs that are unsafe (respectively, safe). We present...... a prototype tool implementing this approach, and we illustrate it with several examples....

  12. Intellectual Development within Transracial Adoptive Families: Retesting the Confluence Model.

    Science.gov (United States)

    Berbaum, Michael L.; Moreland, Richard L.

    1985-01-01

    Estimates confluence model of intellectual development for a within-family sample of 321 children from 101 transracial adoptive families. Mental ages of children and their parents and birth or adoption intervals were used in a nonlinear least-squares estimation procedure to obtain children's predicted mental ages. Results suggest efficiency of the…

  13. Calculation of Gibbs energy of Zr-Al-Ni, Zr-Al-Cu, Al-Ni-Cu and Zr-Al-Ni-Cu liquid alloys based on quasiregular solution model

    International Nuclear Information System (INIS)

    Li, H.Q.; Yang, Y.S.; Tong, W.H.; Wang, Z.Y.

    2007-01-01

    With the effects of electronic structure and atomic size being introduced, the mixing enthalpy as well as the Gibbs energy of the ternary Zr-Al-Cu, Ni-Al-Cu, Zr-Ni-Al and quaternary Zr-Al-Ni-Cu systems are calculated based on quasiregular solution model. The computed results agree well with the experimental data. The sequence of Gibbs energies of different systems is: G Zr-Al-Ni-Cu Zr-Al-Ni Zr-Al-Cu Cu-Al-Ni . To Zr-Al-Cu, Ni-Al-Cu and Zr-Ni-Al, the lowest Gibbs energy locates in the composition range of X Zr 0.39-0.61, X Al = 0.38-0.61; X Ni = 0.39-0.61, X Al = 0.38-0.60 and X Zr = 0.32-0.67, X Al = 0.32-0.66, respectively. And to the Zr-Ni-Al-Cu system with 66.67% Zr, the lowest Gibbs energy is obtained in the region of X Al = 0.63-0.80, X Ni = 0.14-0.24

  14. Renormalisation group improved leptogenesis in family symmetry models

    International Nuclear Information System (INIS)

    Cooper, Iain K.; King, Stephen F.; Luhn, Christoph

    2012-01-01

    We study renormalisation group (RG) corrections relevant for leptogenesis in the case of family symmetry models such as the Altarelli-Feruglio A 4 model of tri-bimaximal lepton mixing or its extension to tri-maximal mixing. Such corrections are particularly relevant since in large classes of family symmetry models, to leading order, the CP violating parameters of leptogenesis would be identically zero at the family symmetry breaking scale, due to the form dominance property. We find that RG corrections violate form dominance and enable such models to yield viable leptogenesis at the scale of right-handed neutrino masses. More generally, the results of this paper show that RG corrections to leptogenesis cannot be ignored for any family symmetry model involving sizeable neutrino and τ Yukawa couplings.

  15. Superconducting cosmic strings in models with spontaneously broken family symmetry

    International Nuclear Information System (INIS)

    Bibilashvili, T.M.; Dvali, G.R.

    1990-01-01

    It is shown that superconducting cosmic strings with some specific properties naturally exist in models of spontaneously broken family symmetry. Superconductivity may be of both types - bosonic and fermionic. There exists a possible mechanism of string conservation. (orig.)

  16. Generalized model for Memristor-based Wien family oscillators

    KAUST Repository

    Talukdar, Abdul Hafiz Ibne; Radwan, Ahmed G.; Salama, Khaled N.

    2012-01-01

    In this paper, we report the unconventional characteristics of Memristor in Wien oscillators. Generalized mathematical models are developed to analyze four members of the Wien family using Memristors. Sustained oscillation is reported for all types

  17. RT-PCR detection of Candida albicans ALS gene expression in the reconstituted human epithelium (RHE) model of oral candidiasis and in model biofilms.

    Science.gov (United States)

    Green, Clayton B; Cheng, Georgina; Chandra, Jyotsna; Mukherjee, Pranab; Ghannoum, Mahmoud A; Hoyer, Lois L

    2004-02-01

    An RT-PCR assay was developed to analyse expression patterns of genes in the Candida albicans ALS (agglutinin-like sequence) family. Inoculation of a reconstituted human buccal epithelium (RHE) model of mucocutaneous candidiasis with strain SC5314 showed destruction of the epithelial layer by C. albicans and also formation of an upper fungal layer that had characteristics similar to a biofilm. RT-PCR analysis of total RNA samples extracted from C. albicans-inoculated buccal RHE showed that ALS1, ALS2, ALS3, ALS4, ALS5 and ALS9 were consistently detected over time as destruction of the RHE progressed. Detection of transcripts from ALS7, and particularly from ALS6, was more sporadic, but not associated with a strictly temporal pattern. The expression pattern of ALS genes in C. albicans cultures used to inoculate the RHE was similar to that observed in the RHE model, suggesting that contact of C. albicans with buccal RHE does little to alter ALS gene expression. RT-PCR analysis of RNA samples extracted from model denture and catheter biofilms showed similar gene expression patterns to the buccal RHE specimens. Results from the RT-PCR analysis of biofilm RNA specimens were consistent between various C. albicans strains during biofilm development and were comparable to gene expression patterns in planktonic cells. The RT-PCR assay described here will be useful for analysis of human clinical specimens and samples from other disease models. The method will provide further insight into the role of ALS genes and their encoded proteins in the diverse interactions between C. albicans and its host.

  18. A Comparative Test of Work-Family Conflict Models and Critical Examination of Work-Family Linkages

    Science.gov (United States)

    Michel, Jesse S.; Mitchelson, Jacqueline K.; Kotrba, Lindsey M.; LeBreton, James M.; Baltes, Boris B.

    2009-01-01

    This paper is a comprehensive meta-analysis of over 20 years of work-family conflict research. A series of path analyses were conducted to compare and contrast existing work-family conflict models, as well as a new model we developed which integrates and synthesizes current work-family theory and research. This new model accounted for 40% of the…

  19. A family systems nursing intervention model for paediatric health crisis.

    Science.gov (United States)

    Tomlinson, Patricia Short; Peden-McAlpine, Cynthia; Sherman, Suzan

    2012-03-01

    This article discusses the development of a family systems nursing intervention for clinical use in health crisis. Although studies in paediatric critical care provide evidence that family stress is an important clinical phenomenon, studies have demonstrated that few nurses have the requisite family intervention skills to provide family members with adequate support during crisis. In addition, few intervention studies that focus on provider-family relationships with the goal of reducing stress have been reported. This article contributes to the literature by redressing this lack. Data sources.  The literature search supporting this project spanned from 1980 to 2009 and included searches from classic nursing theory, family theory and relevant nursing research specific to the design of the intervention reported. The goal of the intervention is to provide a theoretical and practical foundation for explicit action that enhances relationships with caregivers thereby supporting the integrity of the family and enhancing their coping abilities. The intervention, based on the Family Systems Model and the family's understandings of the situation, defines specific goals and desired outcomes to guide strategic actions. Discussion of the conceptual foundation, procedural development and an example of the protocol is provided. Implications for nursing.  The intervention is designed for nurses with limited knowledge in family theory to aid them to better help families dealing with stress. The proposed intervention can be used to increase nurses' skills in family centred nursing care. Although designed for use in paediatric critical care, it can, with modifications, be used in other nursing specialty areas. © 2011 Blackwell Publishing Ltd.

  20. Core competency model for the family planning public health nurse.

    Science.gov (United States)

    Hewitt, Caroline M; Roye, Carol; Gebbie, Kristine M

    2014-01-01

    A core competency model for family planning public health nurses has been developed, using a three stage Delphi Method with an expert panel of 40 family planning senior administrators, community/public health nursing faculty and seasoned family planning public health nurses. The initial survey was developed from the 2011 Title X Family Planning program priorities. The 32-item survey was distributed electronically via SurveyMonkey(®). Panelist attrition was low, and participation robust resulting in the final 28-item model, suggesting that the Delphi Method was a successful technique through which to achieve consensus. Competencies with at least 75% consensus were included in the model and those competencies were primarily related to education/counseling and administration of medications and contraceptives. The competencies identified have implications for education/training, certification and workplace performance. © 2014 Wiley Periodicals, Inc.

  1. Prognostic role of ‘prion-like propagation’ in SOD1-linked familial ALS: an alternative view

    Directory of Open Access Journals (Sweden)

    Keizo eSugaya

    2014-10-01

    Full Text Available ‘Prion-like propagation’ has recently been proposed for disease spread in Cu/Zn superoxide dismutase 1 (SOD1-linked familial amyotrophic lateral sclerosis (ALS. Pathological SOD1 conformers are presumed to propagate via cell-to-cell transmission. In this model, the risk-based kinetics of neuronal cell loss over time appears to be represented by a sigmoidal function that reflects the kinetics of intercellular transmission. Here, we describe an alternative view of prion-like propagation in SOD1-linked ALS−its relation to disease prognosis under the protective-aggregation hypothesis. Nucleation-dependent polymerization has been widely accepted as the molecular mechanism of prion propagation. If toxic species of misfolded SOD1, as soluble oligomers, are formed as on-pathway intermediates of nucleation-dependent polymerization, further fibril extension via sequential addition of monomeric mutant SOD1 would be protective against neurodegeneration. This is because the concentration of unfolded mutant SOD1 monomers, which serve as precursor of nucleation and toxic species of mutant SOD1, would decline in proportion to the extent of aggregation. The nucleation process requires that native conformers exist in an unfolded state that may result from escaping the cellular protein quality control machinery. However, prion-like propagation−SOD1 aggregated form self-propagates by imposing its altered conformation on normal SOD1−appears to antagonize the protective role of aggregate growth. The cross-seeding reaction with normal SOD1 would lead to a failure to reduce the concentration of unfolded mutant SOD1 monomers, resulting in continuous nucleation and subsequent generation of toxic species, and influence disease prognosis. In this alternative view, the kinetics of neuronal loss appears to be represented by an exponential function, with decreasing risk reflecting the protective role of aggregate and the potential for cross-seeding reactions between

  2. Models of Self in Families of People with Spina Bifida

    Directory of Open Access Journals (Sweden)

    Viviam Rafaela Barbosa Pinheiro Freire

    Full Text Available Abstract: Models of self reveal cultural views regarding the competences that children should acquire, and these views tend to be shared by people within the same environment. Thus, this study aims to evaluate the models of self in families of people with spina bifida. Seventeen caregivers answered an online questionnaire containing socio-demographic questions and three scales of self: autonomous, related and autonomous-related. The data were analyzed using descriptive statistics and techniques of multivariate analysis. The main results indicate that the most valued model of self was the autonomous-related model, reflecting the desire that children develop autonomy as well as interpersonal relationships. Such a model, however, is distinct from that of family groups of people with typical development living in the same cultural environment, indicating the need for families of people with spina bifida to receive support to reach their developmental goals.

  3. Das „neue“ Private. Familie als intime Gefühlsgemeinschaft

    Directory of Open Access Journals (Sweden)

    Regina Harzer

    2006-11-01

    Full Text Available Methodisch versteht sich die Habilitationsschrift als Beitrag zur Rekonstruktion moderner politischer Philosophie. Als zentraler Ansatzpunkt dient das Familienkonzept von Rousseau, seine Schriften werden auf Geschlechterkonstruktionen und bürgerliche Geschlechterordnungen hin untersucht. Grundanliegen der Studie ist es, Bürgerlichkeit unter ihrem zentralen Aspekt des Privaten zu betrachten und in den Kontext moderner kontraktualistischer Philosophie zu stellen. Die Autorin vertritt die Ausgangsthese, Rousseau müsse eine „Schlüsselstellung“ (S. 9 in der Geschichte der bürgerlichen Geschlechter- und Familienordnung zugesprochen werden. Durch ihn sei die Trennung des Privaten vom Öffentlichen eingeleitet und festgeschrieben worden.

  4. Analytical modeling of AlGaN/AlN/GaN heterostructures including effects of distributed surface donor states

    Energy Technology Data Exchange (ETDEWEB)

    Goyal, Nitin, E-mail: nitin@unik.no [Carinthian Tech Research CTR AG, Europastraße 4/1, Technologiepark Villach, A-9524 Villach/St. Magdalen (Austria); Department of Electronics and Telecommunication, Norwegian University of Science and Technology, Trondheim NO7034 (Norway); Fjeldly, Tor A. [Department of Electronics and Telecommunication, Norwegian University of Science and Technology, Trondheim NO7034 (Norway)

    2014-07-14

    In this paper, a physics based analytical model is presented for calculation of the two-dimensional electron gas density and the bare surface barrier height of AlGaN/AlN/GaN material stacks. The presented model is based on the concept of distributed surface donor states and the self-consistent solution of Poisson equation at the different material interfaces. The model shows good agreement with the reported experimental data and can be used for the design and characterization of advanced GaN devices for power and radio frequency applications.

  5. A model for fine mapping in family based association studies.

    Science.gov (United States)

    Boehringer, Stefan; Pfeiffer, Ruth M

    2009-01-01

    Genome wide association studies for complex diseases are typically followed by more focused characterization of the identified genetic region. We propose a latent class model to evaluate a candidate region with several measured markers using observations on families. The main goal is to estimate linkage disequilibrium (LD) between the observed markers and the putative true but unobserved disease locus in the region. Based on this model, we estimate the joint distribution of alleles at the observed markers and the unobserved true disease locus, and a penetrance parameter measuring the impact of the disease allele on disease risk. A family specific random effect allows for varying baseline disease prevalences for different families. We present a likelihood framework for our model and assess its properties in simulations. We apply the model to an Alzheimer data set and confirm previous findings in the ApoE region.

  6. Association study on glutathione S-transferase omega 1 and 2 and familial ALS

    NARCIS (Netherlands)

    van de Giessen, Elsmarieke; Fogh, Isabella; Gopinath, Sumana; Smith, Bradley; Hu, Xun; Powell, John; Andersen, Peter; Nicholson, Garth; Al Chalabi, Ammar; Shaw, Christopher E.

    2008-01-01

    Glutathione S-transferase omega 1 and 2 (GSTO1 and 2) protect from oxidative stress, a possible pathogenic mechanism underlying the pathogenesis of neurodegenerative diseases such as amyotrophic lateral sclerosis (ALS) and Alzheimer's disease. Significant association of age of onset in Alzheimer's

  7. Exome-wide rare variant analysis identifies TUBA4A mutations associated with familial ALS

    NARCIS (Netherlands)

    Smith, Bradley N.; Ticozzi, Nicola; Fallini, Claudia; Gkazi, Athina Soragia; Topp, Simon; Kenna, Kevin P.; Scotter, Emma L.; Kost, Jason; Keagle, Pamela; Miller, Jack W.; Calini, Daniela; Vance, Caroline; Danielson, Eric W.; Troakes, Claire; Tiloca, Cinzia; Al-Sarraj, Safa; Lewis, Elizabeth A.; King, Andrew; Colombrita, Claudia; Pensato, Viviana; Castellotti, Barbara; de Belleroche, Jacqueline; Baas, Frank; ten Asbroek, Anneloor L. M. A.; Sapp, Peter C.; McKenna-Yasek, Diane; McLaughlin, Russell L.; Polak, Meraida; Asress, Seneshaw; Esteban-Pérez, Jesús; Muñoz-Blanco, José Luis; Simpson, Michael; van Rheenen, Wouter; Diekstra, Frank P.; Lauria, Giuseppe; Duga, Stefano; Corti, Stefania; Cereda, Cristina; Corrado, Lucia; Sorarù, Gianni; Morrison, Karen E.; Williams, Kelly L.; Nicholson, Garth A.; Blair, Ian P.; Dion, Patrick A.; Leblond, Claire S.; Rouleau, Guy A.; Hardiman, Orla; Veldink, Jan H.; van den Berg, Leonard H.

    2014-01-01

    Exome sequencing is an effective strategy for identifying human disease genes. However, this methodology is difficult in late-onset diseases where limited availability of DNA from informative family members prohibits comprehensive segregation analysis. To overcome this limitation, we performed an

  8. Modelling step-families: exploratory findings.

    Science.gov (United States)

    Bartlema, J

    1988-01-01

    "A combined macro-micro model is applied to a population similar to that forecast for 2035 in the Netherlands in order to simulate the effect on kinship networks of a mating system of serial monogamy. The importance of incorporating a parameter for the degree of concentration of childbearing over the female population is emphasized. The inputs to the model are vectors of fertility rates by age of mother, and by age of father, a matrix of first-marriage rates by age of both partners (used in the macro-analytical expressions), and two parameters H and S (used in the micro-simulation phase). The output is a data base of hypothetical individuals, whose records contain identification number, age, sex, and the identification numbers of their relatives." (SUMMARY IN FRE) excerpt

  9. Thermodynamic modeling of the Ti-Al-Cr ternary system

    International Nuclear Information System (INIS)

    Chen Leyi; Qiu Aitao; Liu Lanjie; Jiang Ming; Lu Xionggang; Li Chonghe

    2011-01-01

    Research highlights: → The full experimental results of the Ti-Al-Cr ternary system and its sub-binary systems are reviewed and analysed in detail. → Based on the latest thermodynamic assessments of the Ti-Al, Ti-Cr and Al-Cr systems and the ternary experimental data in literature, the thermodynamic parameters of the Ti-Al-Cr ternary system are fully assessed by the Calphad method. → The transformation of disorder to order (bcc a 2 to B2) and the new ternary compound L 12T i 25 Cr 8 Al 67 are considered in this work. - Abstract: The Ti-Al-Cr ternary system is one of the most important systems to studying the titanium alloys. Some experimental data of this ternary system are available and a few partial thermodynamic assessments are reported. However, no full thermodynamic descriptions were published. In this study, the previous work on the Ti-Al-Cr system and its related binary systems are reviewed. Based on the thermodynamic descriptions of the Ti-Al, Ti-Cr and Al-Cr systems and the ternary experimental data in literature, the Ti-Al-Cr ternary system is assessed by means of the Calphad method. Several isothermal sections from 1073 K to 1573 K and some invariant reactions are calculated, which are in good agreement with the most of the experimental results.

  10. Interfaith education: A new model for today's interfaith families

    Science.gov (United States)

    Gordon, Sheila C.; Arenstein, Benjamin

    2017-04-01

    With societal changes rapidly transforming cultures that had been largely homogenous, today's multi-cultural - and in particular interfaith - families need new educational strategies to help them understand their cultural roots and identify and clarify what aspects of their heritages they wish to nurture and transmit to their children. This paper focuses on a new model for religious education, namely non-doctrinaire "dual-faith" education, which the principal author has helped to develop in the United States (US) through the Interfaith Community (IFC), a small, independent non-profit organisation created and led by dual-faith Jewish/Christian families. The model is premised on the notion that families can have two different faiths in one household and that - with respect and education - families can be harmonious, religion can be transmitted, and tolerance broadly nurtured. While the model is particular to the US and to families with Jewish and Christian heritages, its premises and structure have significant potential to be adaptable to other religious combinations and other cultures and countries. After reviewing relevant literature and situating the IFC model in the global and US contexts, the paper sets out to clarify the importance of the concept, describe its elements, and discuss its implications for religious education in this time of changing ethos and demography.

  11. Two familial ALS proteins function in prevention/repair of transcription-associated DNA damage.

    Science.gov (United States)

    Hill, Sarah J; Mordes, Daniel A; Cameron, Lisa A; Neuberg, Donna S; Landini, Serena; Eggan, Kevin; Livingston, David M

    2016-11-29

    Amyotrophic lateral sclerosis (ALS) is a progressive motor neuron dysfunction disease that leads to paralysis and death. There is currently no established molecular pathogenesis pathway. Multiple proteins involved in RNA processing are linked to ALS, including FUS and TDP43, and we propose a disease mechanism in which loss of function of at least one of these proteins leads to an accumulation of transcription-associated DNA damage contributing to motor neuron cell death and progressive neurological symptoms. In support of this hypothesis, we find that FUS or TDP43 depletion leads to increased sensitivity to a transcription-arresting agent due to increased DNA damage. Thus, these proteins normally contribute to the prevention or repair of transcription-associated DNA damage. In addition, both FUS and TDP43 colocalize with active RNA polymerase II at sites of DNA damage along with the DNA damage repair protein, BRCA1, and FUS and TDP43 participate in the prevention or repair of R loop-associated DNA damage, a manifestation of aberrant transcription and/or RNA processing. Gaining a better understanding of the role(s) that FUS and TDP43 play in transcription-associated DNA damage could shed light on the mechanisms underlying ALS pathogenesis.

  12. Familienfreundlichkeit als Zukunftsfrage in Unternehmen [Family-friendliness in business as a key issue for the future

    Directory of Open Access Journals (Sweden)

    Stutzer, Erich

    2012-04-01

    Full Text Available [english] These days family-friendliness is a key issue for the future of businesses. Investments in a family conscious personnel policy are considered as forward-looking decisions in companies. This happens against the background of a sustainable personnel policy in times of a decrease in the number of employable persons, an increasing shortage of skilled workers and an ageing workforce. Family-friendly working conditions are becoming a key factor in the competition for staff. When choosing an employer, family-friendliness has become a crucial topic. Employment participation and skills of women, especially of mothers, have greatly increased. To facilitate the realisation of their wish to return to paid employment, however, measures to reconcile work and family are required.Family-conscious measures have been proven to lead to higher employee productivity. Job satisfaction and motivation of employees and accumulation of human capital increase, absenteeism declines, the return of investment rises. Fields of activity for family-friendly measures in companies range from working arrangements, parental leave and re-entry programmes and various child care offers to services for families. In connection with the demographic development the demand for a better reconciliation of work and elder care should in future become ever more important, just as the upkeep of the occupational skills and working capacity of an ageing workforce. Family-friendliness has to become an integral part of corporate culture. [german] Familienfreundlichkeit wird heute als wesentliche Zukunftsfrage für Unternehmen diskutiert und Investitionen in eine familienbewusste Personalpolitik gelten als zukunftsweisende Entscheidungen in Unternehmen. Dies geschieht vor dem Hintergrund einer zukunftsfähigen Personalpolitik in Zeiten zurückgehender Erwerbspersonenzahlen, eines zunehmenden Fachkräftemangels und der Alterung der Belegschaften. Familienfreundliche Arbeitsbedingungen werden

  13. A parametric model for analyzing anticipation in genetically predisposed families

    DEFF Research Database (Denmark)

    Larsen, Klaus; Petersen, Janne; Bernstein, Inge

    2009-01-01

    and are sensitive to right truncation of the data. We propose a normal random effects model that allows for right-censored observations and includes covariates, and draw statistical inference based on the likelihood function. We applied the model to the hereditary nonpolyposis colorectal cancer (HNPCC)/Lynch...... syndrome family cohort from the national Danish HNPCC register. Age-at-onset was analyzed in 824 individuals from 2-4 generations in 125 families with proved disease-predisposing mutations. A significant effect from anticipation was identified with a mean of 3 years earlier age-at-onset per generation...

  14. Too close and too rigid: applying the Circumplex Model of Family Systems to first-generation family firms.

    Science.gov (United States)

    Michael-Tsabari, Nava; Lavee, Yoav

    2012-06-01

    Despite growing research interest in family businesses, little is known about the characteristics of the families engaging in them. The present paper uses Olson's (Journal of Psychotherapy & the Family, 1988, 4(12), 7-49; Journal of Family Therapy, 2000, 22, 144-167) Circumplex Model of Marital and Family Systems to look at first-generation family firms. We describe existing typologies of family businesses and discuss similarities between the characteristics of first-generation family firms and the rigidly enmeshed family type described in the Circumplex Model. The Steinberg family business (Gibbon & Hadekel (1990) Steinberg: The breakup of a family empire. ON, Canada: MacMillan) serves to illustrate the difficulties of rigidly enmeshed first-generation family firms. Implications for understanding troubled family businesses are discussed together with guidelines for the assessment of a family business in crisis and for intervention: enhancing open communication; allowing for more flexible leadership style, roles, and rules; and maintaining a balance between togetherness and separateness. © 2012 American Association for Marriage and Family Therapy.

  15. Testing the quantity–quality model of fertility: Estimation using unrestricted family size models

    OpenAIRE

    Mogstad, Magne; Wiswall, Matthew

    2016-01-01

    We examine the relationship between child quantity and quality. Motivated by the theoretical ambiguity regarding the sign of the marginal effects of additional siblings on children's outcomes, our empirical model allows for an unrestricted relationship between family size and child outcomes. We find that the conclusion in Black, Devereux, and Salvanes (2005) of no family size effect does not hold after relaxing their linear specification in family size. We find nonzero effects of family size ...

  16. Reframing family-centred obesity prevention using the Family Ecological Model.

    Science.gov (United States)

    Davison, Kirsten K; Jurkowski, Janine M; Lawson, Hal A

    2013-10-01

    According to the Family Ecological Model (FEM), parenting behaviours are shaped by the contexts in which families are embedded. In the present study, we utilize the FEM to guide a mixed-methods community assessment and summarize the results. Additionally, we discuss the utility of the FEM and outline possible improvements. Using a cross-sectional design, qualitative and quantitative methods were used to examine the ecologies of parents’ cognitions and behaviours specific to children’s diet, physical activity and screen-based behaviours. Results were mapped onto constructs outlined in the FEM. The study took place in five Head Start centres in a small north-eastern city. The community assessment was part of a larger study to develop and evaluate a family-centred obesity prevention programme for low-income families. Participants included eighty-nine low-income parents/caregivers of children enrolled in Head Start. Parents reported a broad range of factors affecting their parenting cognitions and behaviours. Intrafamilial factors included educational and cultural backgrounds, family size and a lack of social support from partners. Organizational factors included staff stability at key organizations, a lack of service integration and differing school routines. Community factors included social connectedness to neighbours/friends, shared norms around parenting and the availability of safe public housing and play spaces. Policy- and media-related factors included requirements of public assistance programmes, back-to-work policies and children’s exposure to food advertisements. Based on these findings, the FEM was refined to create an evidence-based,temporally structured logic model to support and guide family-centred research in childhood obesity prevention.

  17. Efficient family-based model checking via variability abstractions

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar; Al-Sibahi, Ahmad Salim; Brabrand, Claus

    2016-01-01

    with the abstract model checking of the concrete high-level variational model. This allows the use of Spin with all its accumulated optimizations for efficient verification of variational models without any knowledge about variability. We have implemented the transformations in a prototype tool, and we illustrate......Many software systems are variational: they can be configured to meet diverse sets of requirements. They can produce a (potentially huge) number of related systems, known as products or variants, by systematically reusing common parts. For variational models (variational systems or families...... of related systems), specialized family-based model checking algorithms allow efficient verification of multiple variants, simultaneously, in a single run. These algorithms, implemented in a tool Snip, scale much better than ``the brute force'' approach, where all individual systems are verified using...

  18. Single chain variable fragment antibodies block aggregation and toxicity induced by familial ALS-linked mutant forms of SOD1.

    Science.gov (United States)

    Ghadge, Ghanashyam D; Pavlovic, John D; Koduvayur, Sujatha P; Kay, Brian K; Roos, Raymond P

    2013-08-01

    Approximately 10% of amyotrophic lateral sclerosis (ALS) cases are familial (known as FALS) with an autosomal dominant inheritance pattern, and ~25% of FALS cases are caused by mutations in Cu/Zn superoxide dismutase (SOD1). There is convincing evidence that mutant SOD1 (mtSOD1) kills motor neurons (MNs) because of a gain-of-function toxicity, most likely related to aggregation of mtSOD1. A number of recent reports have suggested that antibodies can be used to treat mtSOD1-induced FALS. To follow up on the use of antibodies as potential therapeutics, we generated single chain fragments of variable region antibodies (scFvs) against SOD1, and then expressed them as 'intrabodies' within a motor neuron cell line. In the present study, we describe isolation of human scFvs that interfere with mtSOD1 in vitro aggregation and toxicity. These scFvs may have therapeutic potential in sporadic ALS, as well as FALS, given that sporadic ALS may also involve abnormalities in the SOD1 protein or activity. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. Bringing Partnership Home: A Model of Family Transformation

    Directory of Open Access Journals (Sweden)

    Julie de Azevedo Hanks

    2015-07-01

    Full Text Available Eisler’s cultural transformation theory suggests that the global crises we face can be addressed only through movement to a partnership model of social organization. Drawing on cultural transformation theory and systems theory, a partnership model of family organization (PMFO is outlined as a practical framework to guide families toward partnership relations. Eight components of PMFO are presented and expanded on as a path toward furthering familial and societal transformation. The eight tenets of a PMFO are: 1 cooperative adult leadership, 2 connecting orientation, 3 caretaking emphasis, 4 collaborative roles and rules, 5 celebration of unique contributions, 6 compassionate communication, 7 conscious language use, and 8 collection and creation of partnership stories. Finally, specific strategies of application of the PMFO will be discussed.

  20. Fourth standard model family neutrino at future linear colliders

    International Nuclear Information System (INIS)

    Ciftci, A.K.; Ciftci, R.; Sultansoy, S.

    2005-01-01

    It is known that flavor democracy favors the existence of the fourth standard model (SM) family. In order to give nonzero masses for the first three-family fermions flavor democracy has to be slightly broken. A parametrization for democracy breaking, which gives the correct values for fundamental fermion masses and, at the same time, predicts quark and lepton Cabibbo-Kobayashi-Maskawa (CKM) matrices in a good agreement with the experimental data, is proposed. The pair productions of the fourth SM family Dirac (ν 4 ) and Majorana (N 1 ) neutrinos at future linear colliders with √(s)=500 GeV, 1 TeV, and 3 TeV are considered. The cross section for the process e + e - →ν 4 ν 4 (N 1 N 1 ) and the branching ratios for possible decay modes of the both neutrinos are determined. The decays of the fourth family neutrinos into muon channels (ν 4 (N 1 )→μ ± W ± ) provide cleanest signature at e + e - colliders. Meanwhile, in our parametrization this channel is dominant. W bosons produced in decays of the fourth family neutrinos will be seen in detector as either di-jets or isolated leptons. As an example, we consider the production of 200 GeV mass fourth family neutrinos at √(s)=500 GeV linear colliders by taking into account di-muon plus four jet events as signatures

  1. The Family-Study Interface and Academic Outcomes: Testing a Structural Model

    Science.gov (United States)

    Meeuwisse, Marieke; Born, Marise Ph.; Severiens, Sabine E.

    2011-01-01

    Expanding on family-work and work-study models, this article investigated a model for family-study conflict and family-study facilitation. The focus of the study was the relationship of family-study conflict and family-study facilitation with students' effortful behaviors and academic performance among a sample of university students (N = 1,656).…

  2. Designing Experiments to Discriminate Families of Logic Models.

    Science.gov (United States)

    Videla, Santiago; Konokotina, Irina; Alexopoulos, Leonidas G; Saez-Rodriguez, Julio; Schaub, Torsten; Siegel, Anne; Guziolowski, Carito

    2015-01-01

    Logic models of signaling pathways are a promising way of building effective in silico functional models of a cell, in particular of signaling pathways. The automated learning of Boolean logic models describing signaling pathways can be achieved by training to phosphoproteomics data, which is particularly useful if it is measured upon different combinations of perturbations in a high-throughput fashion. However, in practice, the number and type of allowed perturbations are not exhaustive. Moreover, experimental data are unavoidably subjected to noise. As a result, the learning process results in a family of feasible logical networks rather than in a single model. This family is composed of logic models implementing different internal wirings for the system and therefore the predictions of experiments from this family may present a significant level of variability, and hence uncertainty. In this paper, we introduce a method based on Answer Set Programming to propose an optimal experimental design that aims to narrow down the variability (in terms of input-output behaviors) within families of logical models learned from experimental data. We study how the fitness with respect to the data can be improved after an optimal selection of signaling perturbations and how we learn optimal logic models with minimal number of experiments. The methods are applied on signaling pathways in human liver cells and phosphoproteomics experimental data. Using 25% of the experiments, we obtained logical models with fitness scores (mean square error) 15% close to the ones obtained using all experiments, illustrating the impact that our approach can have on the design of experiments for efficient model calibration.

  3. Modelling community, family, and individual determinants of childhood dental caries

    NARCIS (Netherlands)

    Duijster, D.; Loveren, C. van; Dusseldorp, E.; Verrips, G.H.W.

    2014-01-01

    This cross-sectional study empirically tested a theoretical model of pathways and inter-relationships among community, family, and individual determinants of childhood dental caries in a sample of 630, 6-year-old children from the Netherlands. Children's decayed, missing, and filled teeth (dmft)

  4. Defining a Family of Cognitive Diagnosis Models Using Log-Linear Models with Latent Variables

    Science.gov (United States)

    Henson, Robert A.; Templin, Jonathan L.; Willse, John T.

    2009-01-01

    This paper uses log-linear models with latent variables (Hagenaars, in "Loglinear Models with Latent Variables," 1993) to define a family of cognitive diagnosis models. In doing so, the relationship between many common models is explicitly defined and discussed. In addition, because the log-linear model with latent variables is a general model for…

  5. A new, but old business model for family physicians: cash.

    Science.gov (United States)

    Weber, J Michael

    2013-01-01

    The following study is an exploratory investigation into the opportunity identification, opportunity analysis, and strategic implications of implementing a cash-only family physician practice. The current market dynamics (i.e., increasing insurance premiums, decreasing benefits, more regulations and paperwork, and cuts in federal and state programs) suggest that there is sufficient motivation for these practitioners to change their current business model. In-depth interviews were conducted with office managers and physicians of family physician practices. The results highlighted a variety of issues, including barriers to change, strategy issues, and opportunities/benefits. The implications include theory applications, strategic marketing applications, and managerial decision-making.

  6. [A Structural Equation Model on Family Strength of Married Working Women].

    Science.gov (United States)

    Hong, Yeong Seon; Han, Kuem Sun

    2015-12-01

    The purpose of this study was to identify the effect of predictive factors related to family strength and develop a structural equation model that explains family strength among married working women. A hypothesized model was developed based on literature reviews and predictors of family strength by Yoo. This constructed model was built of an eight pathway form. Two exogenous variables included in this model were ego-resilience and family support. Three endogenous variables included in this model were functional couple communication, family stress and family strength. Data were collected using a self-report questionnaire from 319 married working women who were 30~40 of age and lived in cities of Chungnam province in Korea. Data were analyzed with PASW/WIN 18.0 and AMOS 18.0 programs. Family support had a positive direct, indirect and total effect on family strength. Family stress had a negative direct, indirect and total effect on family strength. Functional couple communication had a positive direct and total effect on family strength. These predictive variables of family strength explained 61.8% of model. The results of the study show a structural equation model for family strength of married working women and that predicting factors for family strength are family support, family stress, and functional couple communication. To improve family strength of married working women, the results of this study suggest nursing access and mediative programs to improve family support and functional couple communication, and reduce family stress.

  7. Culture and Parenting: Family Models Are Not One-Size-Fits-All. FPG Snapshot #67

    Science.gov (United States)

    FPG Child Development Institute, 2012

    2012-01-01

    Family process models guide theories and research about family functioning and child development outcomes. Theory and research, in turn, inform policies and services aimed at families. But are widely accepted models valid across cultural groups? To address these gaps, FPG researchers examined the utility of two family process models for families…

  8. Exploring families' experiences of health: contributions to a model of family health.

    Science.gov (United States)

    Smith, Sarah L; DeGrace, Beth; Ciro, Carrie; Bax, Ami; Hambrick, Andrea; James, Jennifer; Evans, Alexandra

    2017-12-01

    Child health and developmental outcomes are influenced by the health of the family and the context created. Research suggests symptoms of poor family health (e.g. suboptimal family interactions, parenting stress) yet there is limited understanding of the factors which contribute to robust family health which may unveil opportunities for targeted intervention and family health promotion. The present study examined families' experiences of family health and factors contributing to family health. We performed a qualitative study using constructivist grounded theory methods to guide our understanding of family health for families with typically developing children aged 5-18. Interviews were conducted in family homes and all members were invited to participate. Data from interviews were transcribed, coded, thematically analyzed, and verified with select families. Ten families, including 10 mothers, 8 fathers, and 15 children participated in the study. Participants described family health as a process of balance, living purposefully, and sharing experiences together in alignment with family identity. Mediating family health were processes of awareness and reflection, and adapting, adjusting, and changing in response to family life including external stress factors. Results highlight the possibility for healthcare practitioners to facilitate families' self-reflection and awareness about their health in order to mediate family health development.

  9. Angry characters and frightened souls: Patients and family explanatory models of bipolar disorder in Taiwan.

    Science.gov (United States)

    Lan, Yi-Feng Carol; Zelman, Diane C; Chao, Wen-Tao

    2018-01-01

    Bipolar disorder (BD) affects a significant proportion of Taiwanese individuals (Weissman et al., 1996; Yang, Yeh, & Hwu, 2012). Psychotropic medications are typically the mainstay of treatment for BD, and there is an abundance of international research on biological etiology and medication options. However, there is comparatively little research on psychosocial aspects of BD, including how it is understood and managed within families. As culture provides the context in which psychiatric disease is managed, there is a need to identify distinct Chinese psychosocial perspectives that might shed light on intervention options. This research explored how Taiwanese patients and family members comprehend and cope with BD. A sample of 42 participants, including 20 Taiwanese patients diagnosed with Bipolar Disorder-I (BD-I) for at least 4 years, and 22 family members, participated in separate interviews on explanatory models of illness. Qualitative thematic analysis focused on features that were distinct from those in current Western research literature. Five themes were identified that represented Taiwanese conceptualizations of BD, notions of etiology, views regarding treatment, and the difficulties in managing the disorder. Participants used Chinese language terms and descriptions of BD that reflected greater concerns about irritability, anger, and family conflict than about other symptoms, and participants also emphasized characterological trait descriptions of the condition. Their responses reflected their acceptance of lifelong family responsibility for caretaking, clashing beliefs regarding biomedical versus traditional Chinese medical and spiritual models of etiology and cure, profound concerns about the effects of psychiatric medication on the liver and kidney systems, and a focus on stress rather than genetic or biological models of etiology.

  10. Modeling close encounters with massive asteroids: a Markovian approach. An application to the Vesta family

    Science.gov (United States)

    Carruba, V.; Roig, F.; Michtchenko, T. A.; Ferraz-Mello, S.; Nesvorný, D.

    2007-04-01

    Context: Nearly all members of the Vesta family cross the orbits of (4) Vesta, one of the most massive asteroids in the main belt, and some of them approach it closely. When mutual velocities during such close encounters are low, the trajectory of the small body can be gravitationally deflected, consequently changing its heliocentric orbital elements. While the effect of a single close encounter may be small, repeated close encounters may significantly change the proper element distribution of members of asteroid families. Aims: We develop a model of the long-term effect of close encounters with massive asteroids, so as to be able to predict how far former members of the Vesta family could have drifted away from the family. Methods: We first developed a new symplectic integrator that simulates both the effects of close encounters and the Yarkovsky effect. We analyzed the results of a simulation involving a fictitious Vesta family, and propagated the asteroid proper element distribution using the probability density function (pdf hereafter), i.e. the function that describes the probability of having an encounter that modifies a proper element x by Δx, for all the possible values of Δx. Given any asteroids' proper element distribution at time t, the distribution at time t+T may be predicted if the pdf is known (Bachelier 1900, Théorie de la spéculation; Hughes 1995, Random Walks and Random Environments, Vol. I). Results: We applied our new method to the problem of V-type asteroids outside the Vesta family (i.e., the 31 currently known asteroids in the inner asteroid belt that have the same spectral type of members as the Vesta family, but that are outside the limits of the dynamical family) and determined that at least ten objects have a significant diffusion probability over the minimum estimated age of the Vesta family of 1.2 Gyr (Carruba et al. 2005, A&A, 441, 819). These objects can therefore be explained in the framework of diffusion via repeated close

  11. Disaster Hits Home: A Model of Displaced Family Adjustment after Hurricane Katrina

    Science.gov (United States)

    Peek, Lori; Morrissey, Bridget; Marlatt, Holly

    2011-01-01

    The authors explored individual and family adjustment processes among parents (n = 30) and children (n = 55) who were displaced to Colorado after Hurricane Katrina. Drawing on in-depth interviews with 23 families, this article offers an inductive model of displaced family adjustment. Four stages of family adjustment are presented in the model: (a)…

  12. Generalized model for Memristor-based Wien family oscillators

    KAUST Repository

    Talukdar, Abdul Hafiz Ibne

    2012-07-23

    In this paper, we report the unconventional characteristics of Memristor in Wien oscillators. Generalized mathematical models are developed to analyze four members of the Wien family using Memristors. Sustained oscillation is reported for all types though oscillating resistance and time dependent poles are present. We have also proposed an analytical model to estimate the desired amplitude of oscillation before the oscillation starts. These Memristor-based oscillation results, presented for the first time, are in good agreement with simulation results. © 2011 Elsevier Ltd.

  13. Modelling of U-Mo/Al Dispersion fuel fission induced swelling and creep

    International Nuclear Information System (INIS)

    Jeong, Gwan Yoon; Sohn, Dong Seong; Kim, Yeon Soo

    2014-01-01

    In a Dispersion fuel which U-Mo particles are dispersed in Al metal matrix, a similar phenomenon forming a bulge region was observed but it is difficult to quantify and construct a model for explaining creep and swelling because of its complex microstructure change during irradiation including interaction layer (IL) and porosity formation. In a Dispersion fuel meat, fission product induces fuel particles swelling and it has to be accommodated by the deformation of the Al matrix and newly formed IL during irradiation. Then, it is reasonable that stress from fuel swelling in the complex structure should be relaxed by local adjustments of particles, Al matrix, and IL. For analysis of U-Mo/Al Dispersion fuel creep, the creep of U-Mo particle, Al matrix, and IL should be considered. Moreover, not only fuel particle swelling and IL growth, but also fuel and Al matrix consumptions due to IL formation are accounted in terms of their volume fraction changes during irradiation. In this work, fuel particles, Al matrix and IL are treated in a way of homogenized constituents: Fuel particles, Al matrix and IL consist of an equivalent meat during irradiation. Meat volume swelling of two representative plates was measured: One (Plate A) was a pure Al matrix with 6g/cc uranium loading, the other (Plate B) a silicon added Al matrix with 8g/cc uranium loading. The meat swelling of calculated as a function of burnup. The meat swelling of calculation and measurement was compared and the creep rate coefficients for Al and IL were estimated by repetitions. Based on assumption that only the continuous phase of Al-IL combined matrix accommodated the stress from fuel particle swelling and it was allowed to have creep deformation, the homogenization modeling was performed. The meat swelling of two U-Mo/Al Dispersion fuel plates was modeled by using homogenization model

  14. Modelling of U-Mo/Al Dispersion fuel fission induced swelling and creep

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Gwan Yoon; Sohn, Dong Seong [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of); Kim, Yeon Soo [Argonne National Laboratory, Argonne (United States)

    2014-05-15

    In a Dispersion fuel which U-Mo particles are dispersed in Al metal matrix, a similar phenomenon forming a bulge region was observed but it is difficult to quantify and construct a model for explaining creep and swelling because of its complex microstructure change during irradiation including interaction layer (IL) and porosity formation. In a Dispersion fuel meat, fission product induces fuel particles swelling and it has to be accommodated by the deformation of the Al matrix and newly formed IL during irradiation. Then, it is reasonable that stress from fuel swelling in the complex structure should be relaxed by local adjustments of particles, Al matrix, and IL. For analysis of U-Mo/Al Dispersion fuel creep, the creep of U-Mo particle, Al matrix, and IL should be considered. Moreover, not only fuel particle swelling and IL growth, but also fuel and Al matrix consumptions due to IL formation are accounted in terms of their volume fraction changes during irradiation. In this work, fuel particles, Al matrix and IL are treated in a way of homogenized constituents: Fuel particles, Al matrix and IL consist of an equivalent meat during irradiation. Meat volume swelling of two representative plates was measured: One (Plate A) was a pure Al matrix with 6g/cc uranium loading, the other (Plate B) a silicon added Al matrix with 8g/cc uranium loading. The meat swelling of calculated as a function of burnup. The meat swelling of calculation and measurement was compared and the creep rate coefficients for Al and IL were estimated by repetitions. Based on assumption that only the continuous phase of Al-IL combined matrix accommodated the stress from fuel particle swelling and it was allowed to have creep deformation, the homogenization modeling was performed. The meat swelling of two U-Mo/Al Dispersion fuel plates was modeled by using homogenization model.

  15. Report on Financing the New Model of Family Medicine

    Science.gov (United States)

    Spann, Stephen J.

    2004-01-01

    PURPOSE To foster redesigning the work and workplaces of family physicians, this Future of Family Medicine task force was created to formulate and recommend a financial model that sustains and promotes a thriving New Model of care by focusing on practice reimbursement and health care finances. The goals of the task force were to develop a financial model that assesses the impact of the New Model on practice finances, and to recommend health care financial policies that, if implemented, would be expected to promote the New Model and the primary medical care function in the United States for the next few decades. METHODS The members of the task force reflected a wide range of professional backgrounds and expertise. The group met in person on 2 occasions and communicated by e-mail and conference calls to achieve consensus. A marketing study was carried out using focus groups to test the concept of the New Model with consumers. External consultants with expertise in health economics, health care finance, health policy, and practice management were engaged to assist the task force with developing the microeconomic (practice level) and macroeconomic (societal level) financial models necessary to achieve its goals. Model assumptions were derived from the published medical literature, existing practice management databases, and discussions with experienced physicians and other content experts. The results of the financial modeling exercise are included in this report. The initial draft report of the findings and recommendations was shared with a reactor panel representing a broad spectrum of constituencies. Feedback from these individuals was reviewed and incorporated, as appropriate, into the final report. RESULTS The practice-level financial model suggests that full implementation of the New Model of care within the current fee-for-service system of reimbursement would result in a 26% increase in compensation (from $167,457 to $210,288 total annual compensation) for

  16. Report on financing the new model of family medicine.

    Science.gov (United States)

    Spann, Stephen J

    2004-12-02

    To foster redesigning the work and workplaces of family physicians, this Future of Family Medicine task force was created to formulate and recommend a financial model that sustains and promotes a thriving New Model of care by focusing on practice reimbursement and health care finances. The goals of the task force were to develop a financial model that assesses the impact of the New Model on practice finances, and to recommend health care financial policies that, if implemented, would be expected to promote the New Model and the primary medical care function in the United States for the next few decades. The members of the task force reflected a wide range of professional backgrounds and expertise. The group met in person on 2 occasions and communicated by e-mail and conference calls to achieve consensus. A marketing study was carried out using focus groups to test the concept of the New Model with consumers. External consultants with expertise in health economics, health care finance, health policy, and practice management were engaged to assist the task force with developing the microeconomic (practice level) and macroeconomic (societal level) financial models necessary to achieve its goals. Model assumptions were derived from the published medical literature, existing practice management databases, and discussions with experienced physicians and other content experts. The results of the financial modeling exercise are included in this report. The initial draft report of the findings and recommendations was shared with a reactor panel representing a broad spectrum of constituencies. Feedback from these individuals was reviewed and incorporated, as appropriate, into the final report. The practice-level financial model suggests that full implementation of the New Model of care within the current fee-for-service system of reimbursement would result in a 26% increase in compensation (from 167,457 dollars to 210,288 dollars total annual compensation) for prototypical

  17. Interaction between Al3+ and acrylic acid and polyacrylic acid in acidic aqueous solution: a model experiment for the behavior of Al3+ in acidified soil solution.

    Science.gov (United States)

    Etou, Mayumi; Masaki, Yuka; Tsuji, Yutaka; Saito, Tomoyuki; Bai, Shuqin; Nishida, Ikuko; Okaue, Yoshihiro; Yokoyama, Takushi

    2011-01-01

    From the viewpoint of the phytotoxicity and mobility of Al(3+) released from soil minerals due to soil acidification, the interaction between Al(3+) and acrylic acid (AA) and polyacrylic acid (PAA) as a model compound of fulvic acid was investigated. The interaction was examined at pH 3 so as to avoid the hydrolysis of Al(3+). The interaction between Al(3+) and AA was weak. However, the interaction between Al(3+) and PAA was strong and depended on the initial (COOH in PAA)/Al molar ratio (R(P)) of the solution. For the range of 1/R(P), the interaction between Al(3+) and PAA can be divided into three categories: (1) 1:1 Al-PAA-complex (an Al(3+) combines to a carboxyl group), (2) intermolecular Al-PAA-complex (an Al(3+) combines to more than 2 carboxyl groups of other Al-PAA-complexes) in addition to the 1:1 Al-PAA-complex and (3) precipitation of intermolecular complexes. In conclusion, R(P) is an important factor affecting the behavior of Al(3+) in acidic soil solution.

  18. Simplified 2DEG carrier concentration model for composite barrier AlGaN/GaN HEMT

    International Nuclear Information System (INIS)

    Das, Palash; Biswas, Dhrubes

    2014-01-01

    The self consistent solution of Schrodinger and Poisson equations is used along with the total charge depletion model and applied with a novel approach of composite AlGaN barrier based HEMT heterostructure. The solution leaded to a completely new analytical model for Fermi energy level vs. 2DEG carrier concentration. This was eventually used to demonstrate a new analytical model for the temperature dependent 2DEG carrier concentration in AlGaN/GaN HEMT

  19. A family of crisis in a dissipative Fermi accelerator model

    International Nuclear Information System (INIS)

    Leonel, Edson D.; Egydio de Carvalho, R.

    2007-01-01

    The Fermi accelerator model is studied in the framework of inelastic collisions. The dynamics of this problem is obtained by use of a two-dimensional nonlinear area-contracting map. We consider that the collisions of the particle with both periodically time varying and fixed walls are inelastic. We have shown that the dissipation destroys the mixed phase space structure of the nondissipative case and in special, we have obtained and characterized in this problem a family of two damping coefficients for which a boundary crisis occurs

  20. Model Research On Synthesis Of Al2O3-C Layers By MOCVD

    Directory of Open Access Journals (Sweden)

    Sawka A.

    2015-06-01

    Full Text Available These are model studies whose aim is to obtain information that would allow development of new technology for synthesizing monolayers of Al2O3-C with adjusted microstructure on cemented carbides. The Al2O3-C layer will constitute an intermediate layer on which the outer layer of Al2O3 without carbon is synthesized. The purpose of the intermediate layer is to block the cobalt diffusion to the synthesized outer layer of Al2O3 and to stop the diffusion of air oxygen to the substrate during the synthesis of the outer layer. This layer should be thin, continuous, dense and uniform in thickness.

  1. Evaluation of a task-based community oriented teaching model in family medicine for undergraduate medical students in Iraq

    Directory of Open Access Journals (Sweden)

    Al-Taee Waleed G

    2005-08-01

    Full Text Available Abstract Background The inclusion of family medicine in medical school curricula is essential for producing competent general practitioners. The aim of this study is to evaluate a task-based, community oriented teaching model of family medicine for undergraduate students in Iraqi medical schools. Methods An innovative training model in family medicine was developed based upon tasks regularly performed by family physicians providing health care services at the Primary Health Care Centre (PHCC in Mosul, Iraq. Participants were medical students enrolled in their final clinical year. Students were assigned to one of two groups. The implementation group (28 students was exposed to the experimental model and the control group (56 students received the standard teaching curriculum. The study took place at the Mosul College of Medicine and at the Al-Hadba PHCC in Mosul, Iraq, during the academic year 1999–2000. Pre- and post-exposure evaluations comparing the intervention group with the control group were conducted using a variety of assessment tools. Results The primary endpoints were improvement in knowledge of family medicine and development of essential performance skills. Results showed that the implementation group experienced a significant increase in knowledge and performance skills after exposure to the model and in comparison with the control group. Assessment of the model by participating students revealed a high degree of satisfaction with the planning, organization, and implementation of the intervention activities. Students also highly rated the relevancy of the intervention for future work. Conclusion A model on PHCC training in family medicine is essential for all Iraqi medical schools. The model is to be implemented by various relevant departments until Departments of Family medicine are established.

  2. Modeling of AlMg Sheet Forming at Elevated Temperatures

    NARCIS (Netherlands)

    van den Boogaard, Antonius H.; Bolt, P.; Werkhoven, R.

    2001-01-01

    The process limits of aluminum sheet forming processes can be improved by control-ling local flow behavior by means of elevated temperatures and temperature gradients. In order to accurately model the deep drawing or stretching of aluminum sheet at elevated temperatures, a model is required that

  3. Preon Model and Family Replicated E_6 Unification

    Directory of Open Access Journals (Sweden)

    Larisa V. Laperashvili

    2008-02-01

    Full Text Available Previously we suggested a new preon model of composite quark-leptons and bosons with the 'flipped' $E_6imes widetilde{E_6}$ gauge symmetry group. We assumed that preons are dyons having both hyper-electric $g$ and hyper-magnetic $ilde g$ charges, and these preons-dyons are confined by hyper-magnetic strings which are an ${f N}=1$ supersymmetric non-Abelian flux tubes created by the condensation of spreons near the Planck scale. In the present paper we show that the existence of the three types of strings with tensions $T_k=k T_0$ $(k = 1,2,3$ producing three (and only three generations of composite quark-leptons, also provides three generations of composite gauge bosons ('hyper-gluons' and, as a consequence, predicts the family replicated $[E_6]^3$ unification at the scale $sim 10^{17}$ GeV. This group of unification has the possibility of breaking to the group of symmetry: $ [SU(3_C]^3imes [SU(2_L]^3imes [U(1_Y]^3 imes [U(1_{(B-L}]^3$ which undergoes the breakdown to the Standard Model at lower energies. Some predictive advantages of the family replicated gauge groups of symmetry are briefly discussed.

  4. A family of hyperelastic models for human brain tissue

    Science.gov (United States)

    Mihai, L. Angela; Budday, Silvia; Holzapfel, Gerhard A.; Kuhl, Ellen; Goriely, Alain

    2017-09-01

    Experiments on brain samples under multiaxial loading have shown that human brain tissue is both extremely soft when compared to other biological tissues and characterized by a peculiar elastic response under combined shear and compression/tension: there is a significant increase in shear stress with increasing axial compression compared to a moderate increase with increasing axial tension. Recent studies have revealed that many widely used constitutive models for soft biological tissues fail to capture this characteristic response. Here, guided by experiments of human brain tissue, we develop a family of modeling approaches that capture the elasticity of brain tissue under varying simple shear superposed on varying axial stretch by exploiting key observations about the behavior of the nonlinear shear modulus, which can be obtained directly from the experimental data.

  5. Phenomenological viability of orbifold models with three Higgs families

    International Nuclear Information System (INIS)

    Escudero, Nicolas; Munoz, Carlos; Teixeira, Ana M.

    2006-01-01

    We discuss the phenomenological viability of string multi-Higgs doublet models, namely a scenario of heterotic Z 3 orbifolds with two Wilson lines, which naturally predicts three supersymmetric families of matter and Higgs fields. We study the orbifold parameter space, and discuss the compatibility of the predicted Yukawa couplings with current experimental data. We address the implications of tree-level flavour changing neutral processes in constraining the Higgs sector of the model, finding that viable scenarios can be obtained for a reasonably light Higgs spectrum. We also take into account the tree-level contributions to indirect CP violation, showing that the experimental value of ε K can be accommodated in the present framework

  6. The speech-based envelope power spectrum model (sEPSM) family: Development, achievements, and current challenges

    DEFF Research Database (Denmark)

    Relano-Iborra, Helia; Chabot-Leclerc, Alexandre; Scheidiger, Christoph

    2017-01-01

    have extended the predictive power of the original model to a broad range of conditions. This contribution presents the most recent developments within the sEPSM “family:” (i) A binaural extension, the B-sEPSM [Chabot-Leclerc et al. (2016). J. Acoust. Soc. Am. 140(1), 192-205] which combines better......Intelligibility models provide insights regarding the effects of target speech characteristics, transmission channels and/or auditory processing on the speech perception performance of listeners. In 2011, Jørgensen and Dau proposed the speech-based envelope power spectrum model [sEPSM, Jørgensen...

  7. Family Resilience in the Military: Definitions, Models, and Policies

    Science.gov (United States)

    2015-01-01

    data to measure and improve efficiency, effectiveness, performance, accountability , outcomes, and other indicators of quality program processes...strengths contribute to a sense of family well-being and offset difficulties in other areas of family functioning.” Heru and Drury (2011, p. 45) “The...resilience: Integrating life­span and family perspectives,” Family Process, 35(3), 1996, 283–298. Heru, A., and L. M. Drury , “Developing family

  8. Putting theory to the test: Examining family context, caregiver motivation, and conflict in the Family Check-Up model

    Science.gov (United States)

    Fosco, Gregory M.; Van Ryzin, Mark; Stormshak, Elizabeth A.; Dishion, Thomas J.

    2014-01-01

    This study examined contextual factors (caregiver depression, family resources, ethnicity, and initial levels of youth problem behavior) related to the effectiveness of the Family Check-Up (FCU) and evaluated family processes as a mediator of FCU intervention response and adolescent antisocial behavior. We followed a sample of 180 ethnically diverse youths of families who engaged in the FCU intervention. Family data were collected as part of the FCU assessment, and youth data were collected over 4 years, from sixth through ninth grade. Findings indicated that caregiver depression and minority status predicted greater caregiver motivation to change. In turn, caregiver motivation was the only direct predictor of FCU intervention response during a 1-year period. Growth in family conflict from sixth through eighth grade mediated the link between FCU response and ninth-grade antisocial behavior. This study explicitly tested core aspects of the FCU intervention model and demonstrated that caregiver motivation is a central factor that underlies family response to the FCU. The study also provided support for continued examination of family process mechanisms that account for enduring effects of the FCU and other family-centered interventions. PMID:24438894

  9. Putting theory to the test: examining family context, caregiver motivation, and conflict in the Family Check-Up model.

    Science.gov (United States)

    Fosco, Gregory M; Van Ryzin, Mark; Stormshak, Elizabeth A; Dishion, Thomas J

    2014-05-01

    This study examined contextual factors (caregiver depression, family resources, ethnicity, and initial levels of youth problem behavior) related to the effectiveness of the Family Check-Up (FCU) and evaluated family processes as a mediator of FCU intervention response and adolescent antisocial behavior. We followed a sample of 180 ethnically diverse youths of families who engaged in the FCU intervention. Family data were collected as part of the FCU assessment, and youth data were collected over 4 years, from sixth through ninth grade. Findings indicated that caregiver depression and minority status predicted greater caregiver motivation to change. In turn, caregiver motivation was the only direct predictor of FCU intervention response during a 1-year period. Growth in family conflict from sixth through eighth grade mediated the link between FCU response and ninth-grade antisocial behavior. This study explicitly tested core aspects of the FCU intervention model and demonstrated that caregiver motivation is a central factor that underlies family response to the FCU. The study also provided support for continued examination of family process mechanisms that account for enduring effects of the FCU and other family-centered interventions.

  10. Family support and acceptance, gay male identity formation, and psychological adjustment: a path model.

    Science.gov (United States)

    Elizur, Y; Ziv, M

    2001-01-01

    While heterosexist family undermining has been demonstrated to be a developmental risk factor in the life of persons with same-gender orientation, the issue of protective family factors is both controversial and relatively neglected. In this study of Israeli gay males (N = 114), we focused on the interrelations of family support, family acceptance and family knowledge of gay orientation, and gay male identity formation, and their effects on mental health and self-esteem. A path model was proposed based on the hypotheses that family support, family acceptance, family knowledge, and gay identity formation have an impact on psychological adjustment, and that family support has an effect on gay identity formation that is mediated by family acceptance. The assessment of gay identity formation was based on an established stage model that was streamlined for cross-cultural practice by defining three basic processes of same-gender identity formation: self-definition, self-acceptance, and disclosure (Elizur & Mintzer, 2001). The testing of our conceptual path model demonstrated an excellent fit with the data. An alternative model that hypothesized effects of gay male identity on family acceptance and family knowledge did not fit the data. Interpreting these results, we propose that the main effect of family support/acceptance on gay identity is related to the process of disclosure, and that both general family support and family acceptance of same-gender orientation play a significant role in the psychological adjustment of gay men.

  11. Riluzole does not improve lifespan or motor function in three ALS mouse models.

    Science.gov (United States)

    Hogg, Marion C; Halang, Luise; Woods, Ina; Coughlan, Karen S; Prehn, Jochen H M

    2017-12-08

    Riluzole is the most widespread therapeutic for treatment of the progressive degenerative disease amyotrophic lateral sclerosis (ALS). Riluzole gained FDA approval in 1995 before the development of ALS mouse models. We assessed riluzole in three transgenic ALS mouse models: the SOD1 G93A model, the TDP-43 A315T model, and the recently developed FUS (1-359) model. Age, sex and litter-matched mice were treated with riluzole (22 mg/kg) in drinking water or vehicle (DMSO) from symptom onset. Lifespan was assessed and motor function tests were carried out twice weekly to determine whether riluzole slowed disease progression. Riluzole treatment had no significant benefit on lifespan in any of the ALS mouse models tested. Riluzole had no significant impact on decline in motor performance in the FUS (1-359) and SOD1 G93A transgenic mice as assessed by Rotarod and stride length analysis. Riluzole is widely prescribed for ALS patients despite questions surrounding its efficacy. Our data suggest that if riluzole was identified as a therapeutic candidate today it would not progress past pre-clinical assessment. This raises questions about the standards used in pre-clinical assessment of therapeutic candidates for the treatment of ALS.

  12. The project of model practices in family medicine in Slovenia

    Directory of Open Access Journals (Sweden)

    Tonka Poplas Susič

    2013-11-01

    Full Text Available Background: Primary health care has undergone great changes as a consequence of demographic changes, growing patients’ awareness and organizational changes in the healthcare system. Declining interest in family medicine specialization further worsens the situation. In the period of lack of GPs and their overloading, it is necessary to include a diploma graduate nurse in the team of GPs and to define competencies and activities in such a way that encourage more active approach to the patients, meeting the indicators of quality.The purpose of the article is to describe the project of model practice in Slovenia and to present some results.Methods: A model practice introduces a new concept in the areas of human resource standards (to existing team, a diploma graduate nurse is included on a part-time basis; work competences (use of protocols for the treatment of chronic patients, extended and well-defined preventive screenings, establishing registers of chronic patients and assessing quality by means of quality indicators and work management (redistribution of workload .Results: Due to great interest of general practitioners, a total of 271 model practices were introduced in 2011 and 2012. MPs have been distributed evenly through different regions inSlovenia. Registers of patients with chronic diseases (COPD, asthma and diabetes have been established and during the preventive screening, on average 2 patients with a chronic disease and 15 patients with risk factors have been detected. Patients are treated actively according to their needs rather than their preferences.Conclusions: The project of MPs enables a high quality and cost effectiveness of patients’ treatment in family medicine. With a gradual introducing of new MPs, a well planed and monitored patients’ care will be implemented in the practice. In a long run, disburdening of a secondary care level and more rational consumption of drugs are expected

  13. From symptom onset to a diagnosis of amyotrophic lateral sclerosis/motor neuron disease (ALS/MND): experiences of people with ALS/MND and family carers - a qualitative study.

    Science.gov (United States)

    O'Brien, Mary R; Whitehead, Bridget; Jack, Barbara A; Mitchell, John Douglas

    2011-03-01

    Our objectives were to explore the personal perspectives of the diagnostic experience for people with ALS/MND and their family carers identifying issues that could impact positively or negatively on these experiences. We conducted a qualitative study with face-to-face interviews to capture experiences from 24 people with ALS/MND and 18 current family carers. Ten former family carers were also interviewed. The diagnostic experience was fraught with difficulties. There was failure to recognize the significance of some symptoms by patients, carers and primary and secondary care health professionals, which ultimately delayed diagnosis. Delivery of the diagnosis was frequently unsatisfactory despite international guidelines on the subject. Immediate post-diagnosis support often compared negatively to that provided for people with cancer. In conclusion, this study has identified a need for a more streamlined and empathetic diagnostic pathway for people with ALS/MND. Improvements to medical curricula are required to increase awareness of the condition and reduce the likelihood of diagnostic delays resulting from a failure to recognize the need for a neurological referral. Greater public awareness of the illness is also needed. Furthermore, delivery of the diagnosis should more closely adhere to established guidelines.

  14. Predicting Barrett's Esophagus in Families: An Esophagus Translational Research Network (BETRNet) Model Fitting Clinical Data to a Familial Paradigm.

    Science.gov (United States)

    Sun, Xiangqing; Elston, Robert C; Barnholtz-Sloan, Jill S; Falk, Gary W; Grady, William M; Faulx, Ashley; Mittal, Sumeet K; Canto, Marcia; Shaheen, Nicholas J; Wang, Jean S; Iyer, Prasad G; Abrams, Julian A; Tian, Ye D; Willis, Joseph E; Guda, Kishore; Markowitz, Sanford D; Chandar, Apoorva; Warfe, James M; Brock, Wendy; Chak, Amitabh

    2016-05-01

    Barrett's esophagus is often asymptomatic and only a small portion of Barrett's esophagus patients are currently diagnosed and under surveillance. Therefore, it is important to develop risk prediction models to identify high-risk individuals with Barrett's esophagus. Familial aggregation of Barrett's esophagus and esophageal adenocarcinoma, and the increased risk of esophageal adenocarcinoma for individuals with a family history, raise the necessity of including genetic factors in the prediction model. Methods to determine risk prediction models using both risk covariates and ascertained family data are not well developed. We developed a Barrett's Esophagus Translational Research Network (BETRNet) risk prediction model from 787 singly ascertained Barrett's esophagus pedigrees and 92 multiplex Barrett's esophagus pedigrees, fitting a multivariate logistic model that incorporates family history and clinical risk factors. The eight risk factors, age, sex, education level, parental status, smoking, heartburn frequency, regurgitation frequency, and use of acid suppressant, were included in the model. The prediction accuracy was evaluated on the training dataset and an independent validation dataset of 643 multiplex Barrett's esophagus pedigrees. Our results indicate family information helps to predict Barrett's esophagus risk, and predicting in families improves both prediction calibration and discrimination accuracy. Our model can predict Barrett's esophagus risk for anyone with family members known to have, or not have, had Barrett's esophagus. It can predict risk for unrelated individuals without knowing any relatives' information. Our prediction model will shed light on effectively identifying high-risk individuals for Barrett's esophagus screening and surveillance, consequently allowing intervention at an early stage, and reducing mortality from esophageal adenocarcinoma. Cancer Epidemiol Biomarkers Prev; 25(5); 727-35. ©2016 AACR. ©2016 American Association for

  15. Applying the Post-Modern Double ABC-X Model to Family Food Insecurity

    Science.gov (United States)

    Hutson, Samantha; Anderson, Melinda; Swafford, Melinda

    2015-01-01

    This paper develops the argument that using the Double ABC-X model in family and consumer sciences (FCS) curricula is a way to educate nutrition and dietetics students regarding a family's perceptions of food insecurity. The Double ABC-X model incorporates ecological theory as a basis to explain family stress and the resulting adjustment and…

  16. Economic Crisis and Marital Problems in Turkey: Testing the Family Stress Model

    Science.gov (United States)

    Aytac, Isik A.; Rankin, Bruce H.

    2009-01-01

    This paper applied the family stress model to the case of Turkey in the wake of the 2001 economic crisis. Using structural equation modeling and a nationally representative urban sample of 711 married women and 490 married men, we tested whether economic hardship and the associated family economic strain on families resulted in greater marital…

  17. Evaluation of the Stress Adjustment and Adaptation Model among Families Reporting Economic Pressure

    Science.gov (United States)

    Vandsburger, Etty; Biggerstaff, Marilyn A.

    2004-01-01

    This research evaluates the Stress Adjustment and Adaptation Model (double ABCX model) examining the effects resiliency resources on family functioning when families experience economic pressure. Families (N = 128) with incomes at or below the poverty line from a rural area of a southern state completed measures of perceived economic pressure,…

  18. The First Historically Reported Italian Family with FTD/ALS Teaches a Lesson on C9orf72 RE: Clinical Heterogeneity and Oligogenic Inheritance.

    Science.gov (United States)

    Giannoccaro, Maria Pia; Bartoletti-Stella, Anna; Piras, Silvia; Casalena, Alfonsina; Oppi, Federico; Ambrosetto, Giovanni; Montagna, Pasquale; Liguori, Rocco; Parchi, Piero; Capellari, Sabina

    2018-01-01

    In 1969, Dazzi and Finizio reported the second observation of frontotemporal dementia (FTD) - amyotrophic lateral sclerosis (ALS) association in a large Italian kindred affected by an autosomal dominant form of ALS with high penetrance, frequent bulbar onset, and frequent cognitive decline. To expand the original characterization of this family and report the link with the C9orf72 repeat expansion (RE). We followed or reviewed the medical records of thirteen patients belonging to the original family and performed genetic analyses in four individuals. Eight patients presented with ALS, four with FTD, and one with schizophrenia. The C9orf72 RE was found in three patients but not in the healthy survivor. Additionally, we found a novel possible pathogenic variant in the ITM2B gene in one patient with a complex phenotype, associating movement disorders, psychiatric and cognitive features, deafness, and optic atrophy. The neuropathological examination of this patient did not show the classical features of ITM2B mutation related dementias suggesting that the putative pathogenic mechanism does not involve cellular mislocalization of the protein or the formation of amyloid plaques. We showed that the original Italian pedigree described with FTD/ALS carries the C9orf72 RE. Moreover, the finding of an additional mutation in another dementia causing gene in a patient with a more complex phenotype suggests a possible role of genetic modifiers in the disease. Together with other reports showing the coexistence of mutations in multiple ALS/FTD causative genes in the same family, our study supports an oligogenic etiology of ALS/FTD.

  19. Magnetic properties of Fe–Al for quenched diluted spin-1 Ising model

    International Nuclear Information System (INIS)

    Freitas, A.S.; Albuquerque, Douglas F. de; Fittipaldi, I.P.; Moreno, N.O.

    2014-01-01

    We study the phase diagram of Fe 1−q Al q alloys via the quenched site diluted spin-1 ferromagnetic Ising model by employing effective field theory. One suggests a new approach to exchange interaction between nearest neighbors of Fe that depends on the powers of the Al (q) instead of the linear dependence proposed in other papers. In such model we propose the same kind of the exchange interaction in which the iron–nickel alloys obtain an excellent theoretical description of the experimental data of the T–q phase diagram for all Al concentration q. - Highlights: • We apply the quenched Ising model spin-1 to study the properties of Fe–Al. • We employ the EFT and suggest a new approach to ferromagnetic coupling. • The new probability distribution is considered. • The phase diagram is obtained for all values of q in T–q plane

  20. Magnetic properties of Fe–Al for quenched diluted spin-1 Ising model

    Energy Technology Data Exchange (ETDEWEB)

    Freitas, A.S. [Departamento de Física, Universidade Federal de Sergipe, 49100-000, São Cristovão, SE (Brazil); Coordenadoria de Física, Instituto Federal de Sergipe, 49400-000 Lagarto, SE (Brazil); Albuquerque, Douglas F. de, E-mail: douglas@ufs.br [Departamento de Física, Universidade Federal de Sergipe, 49100-000, São Cristovão, SE (Brazil); Departamento de Matemática, Universidade Federal de Sergipe, 49100-000, São Cristovão, SE (Brazil); Fittipaldi, I.P. [Representação Regional do Ministério da Ciência, Tecnologia e Inovação no Nordeste - ReNE, 50740-540 Recife, PE (Brazil); Moreno, N.O. [Departamento de Física, Universidade Federal de Sergipe, 49100-000, São Cristovão, SE (Brazil)

    2014-08-01

    We study the phase diagram of Fe{sub 1−q}Al{sub q} alloys via the quenched site diluted spin-1 ferromagnetic Ising model by employing effective field theory. One suggests a new approach to exchange interaction between nearest neighbors of Fe that depends on the powers of the Al (q) instead of the linear dependence proposed in other papers. In such model we propose the same kind of the exchange interaction in which the iron–nickel alloys obtain an excellent theoretical description of the experimental data of the T–q phase diagram for all Al concentration q. - Highlights: • We apply the quenched Ising model spin-1 to study the properties of Fe–Al. • We employ the EFT and suggest a new approach to ferromagnetic coupling. • The new probability distribution is considered. • The phase diagram is obtained for all values of q in T–q plane.

  1. Parallel family trees for transfer matrices in the Potts model

    Science.gov (United States)

    Navarro, Cristobal A.; Canfora, Fabrizio; Hitschfeld, Nancy; Navarro, Gonzalo

    2015-02-01

    The computational cost of transfer matrix methods for the Potts model is related to the question in how many ways can two layers of a lattice be connected? Answering the question leads to the generation of a combinatorial set of lattice configurations. This set defines the configuration space of the problem, and the smaller it is, the faster the transfer matrix can be computed. The configuration space of generic (q , v) transfer matrix methods for strips is in the order of the Catalan numbers, which grows asymptotically as O(4m) where m is the width of the strip. Other transfer matrix methods with a smaller configuration space indeed exist but they make assumptions on the temperature, number of spin states, or restrict the structure of the lattice. In this paper we propose a parallel algorithm that uses a sub-Catalan configuration space of O(3m) to build the generic (q , v) transfer matrix in a compressed form. The improvement is achieved by grouping the original set of Catalan configurations into a forest of family trees, in such a way that the solution to the problem is now computed by solving the root node of each family. As a result, the algorithm becomes exponentially faster than the Catalan approach while still highly parallel. The resulting matrix is stored in a compressed form using O(3m ×4m) of space, making numerical evaluation and decompression to be faster than evaluating the matrix in its O(4m ×4m) uncompressed form. Experimental results for different sizes of strip lattices show that the parallel family trees (PFT) strategy indeed runs exponentially faster than the Catalan Parallel Method (CPM), especially when dealing with dense transfer matrices. In terms of parallel performance, we report strong-scaling speedups of up to 5.7 × when running on an 8-core shared memory machine and 28 × for a 32-core cluster. The best balance of speedup and efficiency for the multi-core machine was achieved when using p = 4 processors, while for the cluster

  2. A model of work-family conflict and well-being among Malaysian working women.

    Science.gov (United States)

    Aazami, Sanaz; Akmal, Syaqirah; Shamsuddin, Khadijah

    2015-01-01

    Work and family are the two most important domains in a person's life. Lack of balance between work and family can lead to adverse consequences such as psychological distress; however, the effect of work-family conflict on psychological distress might be mediated by job and family dissatisfaction. This study examines a model of the four dimensions of work-family conflict and their consequences on psychological distress. In particular, we test whether job and family satisfaction mediate the effect of the four dimensions of work-family conflict on psychological distress. This cross-sectional study was conducted among 567 Malaysian women who are working in the public services. Structural Equation Modeling confirmed the mediating role of family satisfaction in the effect of strain-based work interference into family and time-based family interference into work on psychological distress. In addition, our results revealed a significant path that links job to family satisfaction. Moreover, time-based work interference into family and strain-based family interference into work significantly and negatively affect job satisfaction, which in turn influence family satisfaction and eventually affect psychological distress. The results of our study show that organizations need to develop and adapt family friendly policies to mitigate level of employees' work-family conflict.

  3. Modeling of Eutectic Formation in Al-Si Alloy Using A Phase-Field Method

    Directory of Open Access Journals (Sweden)

    Ebrahimi Z.

    2017-12-01

    Full Text Available We have utilized a phase-field model to investigate the evolution of eutectic silicon in Al-Si alloy. The interfacial fluctuations are included into a phase-field model of two-phase solidification, as stochastic noise terms and their dominant role in eutectic silicon formation is discussed. We have observed that silicon spherical particles nucleate on the foundation of primary aluminum phase and their nucleation continues on concentric rings, through the Al matrix. The nucleation of silicon particles is attributed to the inclusion of fluctuations into the phase-field equations. The simulation results have shown needle-like, fish-bone like and flakes of silicon phase by adjusting the noise coefficients to larger values. Moreover, the role of primary Al phase on nucleation of silicon particles in Al-Si alloy is elaborated. We have found that the addition of fluctuations plays the role of modifiers in our simulations and is essential for phase-field modeling of eutectic growth in Al-Si system. The simulated finger-like Al phases and spherical Si particles are very similar to those of experimental eutectic growth in modified Al-Si alloy.

  4. A crystallographic constitutive model for Ni3Al (L12) intermetallics

    International Nuclear Information System (INIS)

    Choi, Y.S.; Dimiduk, D.M.; Uchic, M.D.; Parthasarathy, T.A.

    2005-01-01

    A constitutive model was developed in order to capture the unique thermo-mechanical flow behavior of L1 2 -structured Ni 3 (Al, X) alloys. This model utilized a framework for flow-stress partitioning, which was previously proposed by Ezz and Hirsch, and incorporated a model for exhaustion hardening proposed by Caillard. The simulation results well represent the major aspects of the thermo-mechanical flow behavior of Ni 3 (Al, X) alloys, such as a flow-stress anomaly, its strain dependence and a work-hardening rate anomaly. Selected limitations are discussed along with our current efforts toward extending the present model

  5. Symbolic Game Semantics for Model Checking Program Families

    OpenAIRE

    Dimovski, Aleksandar

    2016-01-01

    Program families can produce a (potentially huge) number of related programs from a common code base. Many such programs are safety critical. However, most verification techniques are designed to work on the level of single programs, and thus are too costly to apply to the entire program family. In this paper, we propose an efficient game semantics based approach for verifying open program families, i.e. program families with free (undefined) identifiers. We use symbolic representation of alg...

  6. Learning from e-Family History: A Model of Online Family Historian Research Behaviour

    Science.gov (United States)

    Friday, Kate

    2014-01-01

    Introduction: This paper reports on doctoral research which investigated the online research behaviour of family historians, from the overall perspective of local studies collections and developing online services for family historians. Method: A hybrid (primarily ethnographic) study was employed using qualitative diaries and shadowing, to examine…

  7. Measurement Model and Psychometric Properties of Family Communication Scale (FCS and Family Satisfaction Scale (FSS in Iranian Families

    Directory of Open Access Journals (Sweden)

    مجتبی حبیبی

    2015-12-01

    Full Text Available The present study examined the stability of the factor structure and psychometric properties of the complementary scales of family adaptability and cohesion evaluation scales (FACES in Iranian families. The scale was translated into Persian language and was used as part of a battery of questionnaires consisting of the scales measuring family communication scale (FCS, family satisfaction scale (FSS, depression, anxiety, stress scale (DASS, youth self-report for behavior problems (YSR, parenting stress index-short form (PSI-SF, and life events (LF. A sample of  1652 subjects (father= 558, mother= 576, child=518 from seven capital cities including Tehran, Mashhad, Tabriz, Kermanshah, Yazd, Shiraz, and Esfahan completed questionnaires. Confirmatory factor analysis upheld the original two-factor structure. The results provided acceptable internal consistency, test-retest reliability, convergent, and divergent validity. Findings supported the Persian version of FCS and FSS for cross-cultural use as a valid and reliable measure for diagnostic purposes in family context.

  8. Motor neuron apoptosis and neuromuscular junction perturbation are prominent features in a Drosophila model of Fus-mediated ALS

    Science.gov (United States)

    2012-01-01

    Backgound Amyotrophic lateral sclerosis (ALS) is progressive neurodegenerative disease characterized by the loss of motor function. Several ALS genes have been identified as their mutations can lead to familial ALS, including the recently reported RNA-binding protein fused in sarcoma (Fus). However, it is not clear how mutations of Fus lead to motor neuron degeneration in ALS. In this study, we present a Drosophila model to examine the toxicity of Fus, its Drosophila orthologue Cabeza (Caz), and the ALS-related Fus mutants. Results Our results show that the expression of wild-type Fus/Caz or FusR521G induced progressive toxicity in multiple tissues of the transgenic flies in a dose- and age-dependent manner. The expression of Fus, Caz, or FusR521G in motor neurons significantly impaired the locomotive ability of fly larvae and adults. The presynaptic structures in neuromuscular junctions were disrupted and motor neurons in the ventral nerve cord (VNC) were disorganized and underwent apoptosis. Surprisingly, the interruption of Fus nuclear localization by either deleting its nuclear localization sequence (NLS) or adding a nuclear export signal (NES) blocked Fus toxicity. Moreover, we discovered that the loss of caz in Drosophila led to severe growth defects in the eyes and VNCs, caused locomotive disability and NMJ disruption, but did not induce apoptotic cell death. Conclusions These data demonstrate that the overexpression of Fus/Caz causes in vivo toxicity by disrupting neuromuscular junctions (NMJs) and inducing apoptosis in motor neurons. In addition, the nuclear localization of Fus is essential for Fus to induce toxicity. Our findings also suggest that Fus overexpression and gene deletion can cause similar degenerative phenotypes but the underlying mechanisms are likely different. PMID:22443542

  9. Motor neuron apoptosis and neuromuscular junction perturbation are prominent features in a Drosophila model of Fus-mediated ALS

    Directory of Open Access Journals (Sweden)

    Xia Ruohan

    2012-03-01

    Full Text Available Abstract Backgound Amyotrophic lateral sclerosis (ALS is progressive neurodegenerative disease characterized by the loss of motor function. Several ALS genes have been identified as their mutations can lead to familial ALS, including the recently reported RNA-binding protein fused in sarcoma (Fus. However, it is not clear how mutations of Fus lead to motor neuron degeneration in ALS. In this study, we present a Drosophila model to examine the toxicity of Fus, its Drosophila orthologue Cabeza (Caz, and the ALS-related Fus mutants. Results Our results show that the expression of wild-type Fus/Caz or FusR521G induced progressive toxicity in multiple tissues of the transgenic flies in a dose- and age-dependent manner. The expression of Fus, Caz, or FusR521G in motor neurons significantly impaired the locomotive ability of fly larvae and adults. The presynaptic structures in neuromuscular junctions were disrupted and motor neurons in the ventral nerve cord (VNC were disorganized and underwent apoptosis. Surprisingly, the interruption of Fus nuclear localization by either deleting its nuclear localization sequence (NLS or adding a nuclear export signal (NES blocked Fus toxicity. Moreover, we discovered that the loss of caz in Drosophila led to severe growth defects in the eyes and VNCs, caused locomotive disability and NMJ disruption, but did not induce apoptotic cell death. Conclusions These data demonstrate that the overexpression of Fus/Caz causes in vivo toxicity by disrupting neuromuscular junctions (NMJs and inducing apoptosis in motor neurons. In addition, the nuclear localization of Fus is essential for Fus to induce toxicity. Our findings also suggest that Fus overexpression and gene deletion can cause similar degenerative phenotypes but the underlying mechanisms are likely different.

  10. Family socioeconomic status, family health, and changes in students' math achievement across high school: A mediational model.

    Science.gov (United States)

    Barr, Ashley Brooke

    2015-09-01

    In response to recent calls to integrate understandings of socioeconomic disparities in health with understandings of socioeconomic disparities in academic achievement, this study tested a mediational model whereby family socioeconomic status predicted gains in academic achievement across high school through its impact on both student and parent health. Data on over 8000 high school students in the U.S. were obtained from wave 1 (2009-2010) and wave 2 (2012) of the High School Longitudinal Study of 2009 (HSLS:09), and structural equation modeling with latent difference scores was used to determine the role of family health problems in mediating the well-established link between family SES and gains in academic achievement. Using both static and dynamic indicators of family SES, support was found for this mediational model. Higher family SES in 9th grade reduced the probability of students and their parents experiencing a serious health problem in high school, thereby promoting growth in academic achievement. In addition, parent and student health problems mediated the effect of changes in family SES across high school on math achievement gains. Results emphasize the importance of considering the dynamic nature of SES and that both student and parent health should be considered in understanding SES-related disparities in academic achievement. This relational process provides new mechanisms for understanding the intergenerational transmission of socioeconomic status and the status attainment process more broadly. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Alcoolismo e fam��lia: a vivência de mulheres participantes do grupo de autoajuda Al-Anon Alcoholism and family: the experience of women members who participate in self-help group Al-Anon

    Directory of Open Access Journals (Sweden)

    Carmen Lúcia Alves Filzola

    2009-01-01

    Full Text Available OBJETIVO: Compreender a vivência de familiares que frequentam o grupo de apoio Al-Anon diante da experiência do alcoolismo. MÉTODO: A pesquisa foi realizada com 6 mulheres, das 10 convidadas, que frequentam o grupo de autoajuda Al-Anon. A coleta de dados se deu através de entrevistas semiestruturadas. Os referenciais teórico e metodológico que embasaram a análise qualitativa foram o Interacionismo Simbólico e a Teoria Fundamentada nos Dados, em seus passos iniciais. RESULTADOS: Os dados resultaram em 3 categorias conceituais: 1 Negando o alcoolismo e sofrendo suas consequências; 2 Buscando ajuda, aprendendo com o grupo; e 3 Esperando a cura, experimentando a sobriedade e enfrentando as recaídas. Além do apoio da própria família e da religião, as mulheres apontaram a importância do grupo de autoajuda para ampará-las no enfrentamento dos problemas decorrentes do alcoolismo. CONCLUSÃO: Esperamos que os resultados desta pesquisa possam contribuir para a valorização do suporte oferecido pelo Al-Anon, estimular novos estudos na área e fortalecer, entre os profissionais de saúde, o reconhecimento do grupo como recurso importante de apoio efetivo às famílias.OBJECTIVE: To investigate the experience of family members who participate in Al-Anon support group in relation to alcoholism. METHOD: The research was accomplished with 6 women, 10 invited, attending the group of self-help Al-Anon. The data collection was through semi-structured interviews. The theoretical and methodological reference to the qualitative analysis was based on Symbolic Interactionism and Grounded Theory in Data, in its initial steps. RESULTS: The data resulted in 3 conceptual categories: 1 Denying alcoholism and suffering yours consequences; 2 Searching for help, learning with the support group; 3 Waiting for cure, experiencing sobriety and facing relapses. Besides the support of family and religion, women pointed to the importance of self-help group to support

  12. Lifetime modelling for MCrAlY coatings in industrial gas turbine blades

    Directory of Open Access Journals (Sweden)

    Krukovsky Pavel

    2004-01-01

    Full Text Available A novel theoretical and experimental approach for lifetime modelling of MCrAlY coatings for stationary gas turbines has been undertaken using the Inverse Problem Solution (IPS technique. With this technique feasible experimental data acquired after a defined experimental time t e are used as input values for the model parameters estimation. In the first stage of the approach a model, based on the oxidation and diffusion processes (Fick's first and second law was assumed, which considers the Al concentration profile across the coating. The measured average Al concentration profiles in the two-phase g+b and g - regions of coating as well as base metal were used as input values for the model parameters estimation and calculational prediction of the long term diffusion and oxidation behavior of the coating was performed. The time, when the b-NiAl phase is completely consumed was assumed as the coating lifetime end. Exposure experiments were carried out with a NiCoCrAlY coating (200 micron thickness with 8% Al in air at 900 °C and 950 °C, currently up to 10000 h. The oxide scale is growing continuously and no other oxides were observed. The average and b-NiAl phase concentration profiles of Al across the coating thickness were determined by electron microprobe and image analysis systems in the initial state after 700 and 10000 h of oxidation. The concentration profile measured after 700 h was used as input values for the model parameters estimation in order to calculate the Al and b-NiAl phase concentration profiles after 10000 h. The computational forecast for 10000 h at 950 °C and 900 °C are in good agreement with the measured data. The approach was applied for NiCoCrAlY (200 micron thickness coating lifetime modelling at 950 °C and 900 °C as well as for different coating thicknesses at 950 °C.

  13. A novel splice-site mutation in ALS2 establishes the diagnosis of juvenile amyotrophic lateral sclerosis in a family with early onset anarthria and generalized dystonias.

    Directory of Open Access Journals (Sweden)

    Saima Siddiqi

    Full Text Available The diagnosis of childhood neurological disorders remains challenging given the overlapping clinical presentation across subgroups and heterogeneous presentation within subgroups. To determine the underlying genetic cause of a severe neurological disorder in a large consanguineous Pakistani family presenting with severe scoliosis, anarthria and progressive neuromuscular degeneration, we performed genome-wide homozygosity mapping accompanied by whole-exome sequencing in two affected first cousins and their unaffected parents to find the causative mutation. We identified a novel homozygous splice-site mutation (c.3512+1G>A in the ALS2 gene (NM_020919.3 encoding alsin that segregated with the disease in this family. Homozygous loss-of-function mutations in ALS2 are known to cause juvenile-onset amyotrophic lateral sclerosis (ALS, one of the many neurological conditions having overlapping symptoms with many neurological phenotypes. RT-PCR validation revealed that the mutation resulted in exon-skipping as well as the use of an alternative donor splice, both of which are predicted to cause loss-of-function of the resulting proteins. By examining 216 known neurological disease genes in our exome sequencing data, we also identified 9 other rare nonsynonymous mutations in these genes, some of which lie in highly conserved regions. Sequencing of a single proband might have led to mis-identification of some of these as the causative variant. Our findings established a firm diagnosis of juvenile ALS in this family, thus demonstrating the use of whole exome sequencing combined with linkage analysis in families as a powerful tool for establishing a quick and precise genetic diagnosis of complex neurological phenotypes.

  14. Elevated free nitrotyrosine levels, but not protein-bound nitrotyrosine or hydroxyl radicals, throughout amyotrophic lateral sclerosis (ALS)-like disease implicate tyrosine nitration as an aberrant in vivo property of one familial ALS-linked superoxide dismutase 1 mutant.

    Science.gov (United States)

    Bruijn, L I; Beal, M F; Becher, M W; Schulz, J B; Wong, P C; Price, D L; Cleveland, D W

    1997-07-08

    Mutations in superoxide dismutase 1 (SOD1; EC 1.15.1.1) are responsible for a proportion of familial amyotrophic lateral sclerosis (ALS) through acquisition of an as-yet-unidentified toxic property or properties. Two proposed possibilities are that toxicity may arise from imperfectly folded mutant SOD1 catalyzing the nitration of tyrosines [Beckman, J. S., Carson, M., Smith, C. D. & Koppenol, W. H. (1993) Nature (London) 364, 584] through use of peroxynitrite or from peroxidation arising from elevated production of hydroxyl radicals through use of hydrogen peroxide as a substrate [Wiedau-Pazos, M., Goto, J. J., Rabizadeh, S., Gralla, E. D., Roe, J. A., Valentine, J. S. & Bredesen, D. E. (1996) Science 271, 515-518]. To test these possibilities, levels of nitrotyrosine and markers for hydroxyl radical formation were measured in two lines of transgenic mice that develop progressive motor neuron disease from expressing human familial ALS-linked SOD1 mutation G37R. Relative to normal mice or mice expressing high levels of wild-type human SOD1, 3-nitrotyrosine levels were elevated by 2- to 3-fold in spinal cords coincident with the earliest pathological abnormalities and remained elevated in spinal cord throughout progression of disease. However, no increases in protein-bound nitrotyrosine were found during any stage of SOD1-mutant-mediated disease in mice or at end stage of sporadic or SOD1-mediated familial human ALS. When salicylate trapping of hydroxyl radicals and measurement of levels of malondialdehyde were used, there was no evidence throughout disease progression in mice for enhanced production of hydroxyl radicals or lipid peroxidation, respectively. The presence of elevated nitrotyrosine levels beginning at the earliest stages of cellular pathology and continuing throughout progression of disease demonstrates that tyrosine nitration is one in vivo aberrant property of this ALS-linked SOD1 mutant.

  15. MODELING OF INTERACTION LAYER GROWTH BETWEEN U-Mo PARTICLES AND AN Al MATRIX

    OpenAIRE

    YEON SOO KIM; G.L. HOFMAN; HO JIN RYU; JONG MAN PARK; A.B. ROBINSON; D.M. WACHS

    2013-01-01

    Interaction layer growth between U-Mo alloy fuel particles and Al in a dispersion fuel is a concern due to the volume expansion and other unfavorable irradiation behavior of the interaction product. To reduce interaction layer (IL) growth, a small amount of Si is added to the Al. As a result, IL growth is affected by the Si content in the Al matrix. In order to predict IL growth during fabrication and irradiation, empirical models were developed. For IL growth prediction during fabrication an...

  16. Human SOD1 ALS Mutations in a Drosophila Knock-In Model Cause Severe Phenotypes and Reveal Dosage-Sensitive Gain- and Loss-of-Function Components.

    Science.gov (United States)

    Şahin, Aslı; Held, Aaron; Bredvik, Kirsten; Major, Paxton; Achilli, Toni-Marie; Kerson, Abigail G; Wharton, Kristi; Stilwell, Geoff; Reenan, Robert

    2017-02-01

    Amyotrophic Lateral Sclerosis (ALS) is the most common adult-onset motor neuron disease and familial forms can be caused by numerous dominant mutations of the copper-zinc superoxide dismutase 1 (SOD1) gene. Substantial efforts have been invested in studying SOD1-ALS transgenic animal models; yet, the molecular mechanisms by which ALS-mutant SOD1 protein acquires toxicity are not well understood. ALS-like phenotypes in animal models are highly dependent on transgene dosage. Thus, issues of whether the ALS-like phenotypes of these models stem from overexpression of mutant alleles or from aspects of the SOD1 mutation itself are not easily deconvolved. To address concerns about levels of mutant SOD1 in disease pathogenesis, we have genetically engineered four human ALS-causing SOD1 point mutations (G37R, H48R, H71Y, and G85R) into the endogenous locus of Drosophila SOD1 (dsod) via ends-out homologous recombination and analyzed the resulting molecular, biochemical, and behavioral phenotypes. Contrary to previous transgenic models, we have recapitulated ALS-like phenotypes without overexpression of the mutant protein. Drosophila carrying homozygous mutations rendering SOD1 protein enzymatically inactive (G85R, H48R, and H71Y) exhibited neurodegeneration, locomotor deficits, and shortened life span. The mutation retaining enzymatic activity (G37R) was phenotypically indistinguishable from controls. While the observed mutant dsod phenotypes were recessive, a gain-of-function component was uncovered through dosage studies and comparisons with age-matched dsod null animals, which failed to show severe locomotor defects or nerve degeneration. We conclude that the Drosophila knock-in model captures important aspects of human SOD1-based ALS and provides a powerful and useful tool for further genetic studies. Copyright © 2017 by the Genetics Society of America.

  17. Semantic test of a technology management model in family business

    Directory of Open Access Journals (Sweden)

    Guillermo Jesús Larios

    2017-10-01

    Full Text Available This paper assembles family business conceptions from the innovation and technology management perspective, and tests them in the case of a Mexican sugarcane producer. Literature indicates that non-financial objectives, risk aversion and strong controls negatively influence family firms’ innovation outcomes. Based on semantic network analysis, we collected transversal information on the firm’s technology activities, innovation values and organizational flows, which allowed for the identification of an organizational management profile that shapes an innovation style. Although we acknowledge literature consistency in aspects such as family direct influence and control, or the importance of STI partnerships and external knowledge, our findings didn’t identify any concerns about losing control in parts of the family business. This research contributes to the understanding of technology management and organizational elements in an emerging economy’s family firm from a relational perspective. Implications for theory endorsement and characterization of family business innovation and technology management in developing countries are discussed.

  18. Modeling of interaction layer growth between U-Mo particles and an Al matrix

    International Nuclear Information System (INIS)

    Kim, Yeon Soo; Horman, G. L.; Ryu, Ho Jin; Park, Jong Man; Robinson, A. B.; Wachs, D. M.

    2013-01-01

    Interaction layer growth between U-Mo alloy fuel particles and Al in a dispersion fuel is a concern due to the volume expansion and other unfavorable irradiation behavior of the interaction product. To reduce interaction layer (IL) growth, a small amount of Si is added to the Al. As a result, IL growth is affected by the Si content in the Al matrix. In order to predict IL growth during fabrication and irradiation, empirical models were developed. For IL growth prediction during fabrication and any follow-on heating process before irradiation, out-of-pile heating test data were used to develop kinetic correlations. Two out-of-pile correlations, one for the pure Al matrix and the other for the Al matrix with Si addition, respectively, were developed, which are Arrhenius equations that include temperature and time. For IL growth predictions during irradiation, the out-of-pile correlations were modified to include a fission-rate term to consider fission enhanced diffusion, and multiplication factors to incorporate the Si addition effect and the effect of the Mo content. The in-pile correlation is applicable for a pure Al matrix and an Al matrix with the Si content up to 8 wt%, for fuel temperatures up to 200 .deg. C, and for Mo content in the range of 6 - 10wt%. In order to cover these ranges, in-pile data were included in modeling from various tests, such as the US RERTR-4, -5, -6, -7 and -9 tests and Korea's KOMO-4 test, that were designed to systematically examine the effects of the fission rate, temperature, Si content in Al matrix, and Mo content in U-Mo particles. A model converting the IL thickness to the IL volume fraction in the meat was also developed

  19. MODELING OF INTERACTION LAYER GROWTH BETWEEN U-Mo PARTICLES AND AN Al MATRIX

    Directory of Open Access Journals (Sweden)

    YEON SOO KIM

    2013-12-01

    Full Text Available Interaction layer growth between U-Mo alloy fuel particles and Al in a dispersion fuel is a concern due to the volume expansion and other unfavorable irradiation behavior of the interaction product. To reduce interaction layer (IL growth, a small amount of Si is added to the Al. As a result, IL growth is affected by the Si content in the Al matrix. In order to predict IL growth during fabrication and irradiation, empirical models were developed. For IL growth prediction during fabrication and any follow-on heating process before irradiation, out-of-pile heating test data were used to develop kinetic correlations. Two out-of-pile correlations, one for the pure Al matrix and the other for the Al matrix with Si addition, respectively, were developed, which are Arrhenius equations that include temperature and time. For IL growth predictions during irradiation, the out-of-pile correlations were modified to include a fission-rate term to consider fission enhanced diffusion, and multiplication factors to incorporate the Si addition effect and the effect of the Mo content. The in-pile correlation is applicable for a pure Al matrix and an Al matrix with the Si content up to 8 wt%, for fuel temperatures up to 200 °C, and for Mo content in the range of 6 – 10wt%. In order to cover these ranges, in-pile data were included in modeling from various tests, such as the US RERTR-4, -5, -6, -7 and -9 tests and Korea's KOMO-4 test, that were designed to systematically examine the effects of the fission rate, temperature, Si content in Al matrix, and Mo content in U-Mo particles. A model converting the IL thickness to the IL volume fraction in the meat was also developed.

  20. On process model representation and AlF{sub 3} dynamics of aluminium electrolysis cells

    Energy Technology Data Exchange (ETDEWEB)

    Drengstig, Tormod

    1997-12-31

    This thesis develops a formal graphical based process representation scheme for modelling complex, non-standard unit processes. The scheme is based on topological and phenomenological decompositions. The topological decomposition is the modularization of processes into modules representing volumes and boundaries, whereas the phenomenological decomposition focuses on physical phenomena and characteristics inside these topological modules. This defines legal and illegal connections between components at all levels and facilitates a full implementation of the methodology into a computer aided modelling tool that can interpret graphical symbols and guide modelers towards a consistent mathematical model of the process. The thesis also presents new results on the excess AlF{sub 3} and bath temperature dynamics of an aluminium electrolysis cell. A dynamic model of such a cell is developed and validated against known behaviour and real process data. There are dynamics that the model does not capture and this is further discussed. It is hypothesized that long-term prediction of bath temperature and excess AlF{sub 3} is impossible with a current efficiency model considering only bath composition and temperature. A control strategy for excess AlF{sub 3} and bath temperature is proposed based on an almost constant AlF{sub 3} input close to average consumption and energy manipulations to compensate for the disturbances. 96 refs., 135 figs., 22 tabs.

  1. Relations between Minuchin's Structural Family Model and Kohut's Self-Psychology Constructs.

    Science.gov (United States)

    Perosa, Linda

    1996-01-01

    Examines relationship between structural family model and self-psychology constructs. College women (n=164) completed the Structural Family Interaction Scale-Revised (SFIS-R), the Parental Relations Inventory, and the Goal Instability and Superiority scales from the Self-Expression Inventory. Indicated that women raised in families with strong…

  2. Testing a Mediational Model of Communication Among Medical Staff and Families of Cancer Patients

    Science.gov (United States)

    Gionta, Dana A.; Harlow, Lisa L.; Loitman, Jane E.; Leeman, Joanne M.

    2005-01-01

    Three structural equation models of communication between family members and medical staff were examined to understand relations among staff accessibility, inhibitory family attitudes, getting communication needs met, perceived stress, and satisfaction with communication. Compared to full and direct models, a mediational model fit best in which…

  3. Modelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si Alloy

    DEFF Research Database (Denmark)

    Tiedje, Niels Skat; Hattel, Jesper Henri; Taylor, John A.

    2013-01-01

    growth parameters from the literature that depend on the type of modification (unmodified, Na-modified or Sr-modified) are used to describe differences in growth of the alloys. Modelling results are compared with solidification experiments where an Al-12.5wt%Si alloy was cast in unmodified, Na modified......A numerical model that describes solidification of primary aluminium grains and nucleation and growth of eutectic cells is used to analyse the solidification of an Al-12.5wt% Si alloy. Nucleation of eutectic cells is modelled using an Oldfield-type nucleation model where the number of nuclei...... and Sr modified forms. The model confirms experimental observations of how modification and alloy composition influence nucleation, growth and finally the size of eutectic cells in the alloys. Modelling results are used to explain how cooling conditions in the casting act together with the nuclei density...

  4. Impacto del tamaño de las familias afiliadas al Seguro Popular de Salud de México, experiencia 2004-2006 Impact of size of families in Mexico's Popular Health Insurance Program

    Directory of Open Access Journals (Sweden)

    José Enrique Pérez-Salvador

    2010-06-01

    Full Text Available OBJETIVO: Comparar el tamaño promedio de las familias del Seguro Popular de Salud (SPS e identificar las variables que mejor predicen la afiliación unipersonal. MATERIAL Y MÉTODOS: Se comparan tamaños promedios de familias según los Padrones 2004 a 2006 del SPS y otras fuentes. Se ajustan modelos logísticos para identificar las variables explicativas de la afiliación como familia unipersonal. RESULTADOS: Las familias del SPS en promedio tienen un miembro menos respecto de otras fuentes. Los modelos logísticos indican que cuanto más reciente es el año de afiliación tanto mayor es la probabilidad de afiliarse como familia unipersonal CONCLUSIONES: El menor número de miembros por familia afiliada implica un sobrefinanciamiento al SPS. Se recomienda cambiar la unidad de financiamiento hacia la persona, para apoyar el sostenimiento financiero y operativo del SPS en el mediano y largo plazos.OBJECTIVE: To compare the average size of families affiliated with Popular Health Insurance (SPS, abbrev. in Spanish and identify variables that best predict single-person affiliation. MATERIAL AND METHODS: Average sizes of families in the SPS are compared using 2004-2006 enrollment records and other sources. Logistic models are used to identify explanatory variables for affiliation as a single-person family. RESULTS: SPS families on average are composed of one member less in comparison with other sources. The logistic models indicate that the more recent the affiliation year the more probable is affiliation as a single-person family. CONCLUSIONS: The smaller number of family members implies an over-financing by the SPS. It is recommended to change the unit of financing to the individual to help the operational and financial sustainability of the SPS over the mid- to long-term.

  5. Autophagy and Neurodegeneration: Insights from a Cultured Cell Model of ALS

    Directory of Open Access Journals (Sweden)

    Francesca Navone

    2015-08-01

    Full Text Available Autophagy plays a major role in the elimination of cellular waste components, the renewal of intracellular proteins and the prevention of the build-up of redundant or defective material. It is fundamental for the maintenance of homeostasis and especially important in post-mitotic neuronal cells, which, without competent autophagy, accumulate protein aggregates and degenerate. Many neurodegenerative diseases are associated with defective autophagy; however, whether altered protein turnover or accumulation of misfolded, aggregate-prone proteins is the primary insult in neurodegeneration has long been a matter of debate. Amyotrophic lateral sclerosis (ALS is a fatal disease characterized by selective degeneration of motor neurons. Most of the ALS cases occur in sporadic forms (SALS, while 10%–15% of the cases have a positive familial history (FALS. The accumulation in the cell of misfolded/abnormal proteins is a hallmark of both SALS and FALS, and altered protein degradation due to autophagy dysregulation has been proposed to contribute to ALS pathogenesis. In this review, we focus on the main molecular features of autophagy to provide a framework for discussion of our recent findings about the role in disease pathogenesis of the ALS-linked form of the VAPB gene product, a mutant protein that drives the generation of unusual cytoplasmic inclusions.

  6. Nb3Al insert experiment log book. 3rd experiment of CS model coil

    International Nuclear Information System (INIS)

    Sugimoto, Makoto; Koizumi, Norikiyo; Isono, Takaaki

    2002-10-01

    The cool down of CS model coil and Nb 3 Al insert was started on March 4, 2002. It took almost one month and immediately started coil charge since April 3, 2002. The charge test of Nb 3 Al insert and CS model coil was completed on May 2, 2002. All of the experiments including the warm up was also completed on May 30, 2002. In this campaign, total shot numbers were 102 and the size of the data file in the DAS (Data Acquisition System) was about 5.2 GB. This report is a database that consists of the log list and the log sheets of every shot. (author)

  7. A simple localized-itinerant model for PrAl3: crystal field and exchange effects

    International Nuclear Information System (INIS)

    Ranke, P.J. von; Palermo, L.

    1990-01-01

    We present a simple magnetic model for PrAl sub(3). The effects of crystal field are treated using a reduced set of levels and the corresponding wave functions are extracted from the actual crystal field levels of Pr sup(+3) in a hexagonal symmetry. The exchange between 4f- and conduction electrons are dealt within a molecular field approximation. An analytical magnetic state equation is derived and the magnetic behaviour discussed. The parameters of the model are estimated from a fitting of the inverse susceptibility of PrAl sub(3) given in the literature. (author)

  8. Modeling Family Dynamics in Children with Fragile X Syndrome

    Science.gov (United States)

    Hall, Scott S.; Burns, David D.; Reiss, Allan L.

    2007-01-01

    Few studies have examined the impact of children with genetic disorders and their unaffected siblings on family functioning. In this study, the reciprocal causal links between problem behaviors and maternal distress were investigated in 150 families containing a child with fragile X syndrome (FXS) and an unaffected sibling. Both children's…

  9. Intrapersonal and Interpersonal Models: Blending Gestalt and Family Therapies

    Science.gov (United States)

    Hatcher, Chris

    1978-01-01

    Family therapy is primarily focused upon interpersonal or transactional issues. Gestalt therapy is particularly well suited for short term work on intrapersonal and boundary issues. This paper shows how the selective integration of the two approaches provides a significant, new dimension in the development of family therapy. (Author)

  10. Perceptions of a Specific Family Communication Application among Grandparents and Grandchildren: An Extension of the Technology Acceptance Model.

    Science.gov (United States)

    Tsai, Tsai-Hsuan; Chang, Hsien-Tsung; Ho, Yi-Lun

    2016-01-01

    Many studies have noted that the use of social networks sites (SNSs) can enhance social interaction among the elderly and that the motivation for the elderly to use SNSs is to keep in contact with remote friends and family or the younger generation. Memotree is designed to promote intergenerational family communication. The system incorporates the Family Tree design concept and provides family communication mechanisms based on the Family Communication Scale. In addition, the system optimizes hardware and interface use to conform to the specific needs of older and substantially younger individuals. Regarding the impact of variables on SNS with respect to the interaction of usability variables in the construction of a cross-generational communication platform, we adopted the TAM model and Chung et al.'s suggestions to promote user acceptance of the proposed Memotree system. A total of 39 grandchildren and 39 grandparents met the criteria and were included in the study. The elderly and young respondents revealed substantial willingness to use and/or satisfaction with using the Memotree system. Empirical results indicate that technology affordances and perceived ease of use have a positive impact on perceived usefulness, while perceived ease of use is affected by technology affordances. Internet self-efficacy and perceived usefulness have a positive impact on the user's behavioral intention toward the system. In addition, this study investigated age as a moderating variable in the model. The results indicate that grandchildren have a larger significant effect on the path between perceived usefulness and behavioral intention than grandparents. This study proposes a more complete framework for investigating the user's behavioral intention and provides a more appropriate explanation of related services for cross-generational interaction with SNS services.

  11. The rational choice model in family decision making at the end of life.

    Science.gov (United States)

    Karasz, Alison; Sacajiu, Galit; Kogan, Misha; Watkins, Liza

    2010-01-01

    Most end-of-life decisions are made by family members. Current ethical guidelines for family decision making are based on a hierarchical model that emphasizes the patient's wishes over his or her best interests. Evidence suggests that the model poorly reflects the strategies and priorities of many families. Researchers observed and recorded 26 decision-making meetings between hospital staff and family members. Semi-structured follow-up interviews were conducted. Transcriptions were analyzed using qualitative techniques. For both staff and families, consideration of a patient's best interests generally took priority over the patient's wishes. Staff generally introduced discussion of the patient's wishes for rhetorical purposes, such as persuasion. Competing moral frameworks, which de-emphasized the salience of patients' autonomy and "right to choose," played a role in family decision making. The priority given to the patients' wishes in the hierarchical model does not reflect the priorities of staff and families in making decisions about end-of-life care.

  12. Experimental investigation and thermodynamic modeling of the Ni-Al-Ru ternary system

    International Nuclear Information System (INIS)

    Zhu, J.; Zhang, C.; Cao, W.; Yang, Y.; Zhang, F.; Chen, S.; Morgan, D.; Chang, Y.A.

    2009-01-01

    In this study, a thermodynamic description of the Ni-Al-Ru system was obtained in terms of experimental phase equilibrium data as well as first-principles-calculated energetics. The calculated isotherms and liquidus projection using this description are in accord with the experimental data obtained in the present study as well as those previously reported in the literature, and the model-calculated enthalpies of formation agree with subsequent first-principles-calculated values. During the thermodynamic modeling of the Ni-Al-Ru system, we encountered great challenges initially to account for one of the experimentally determined isotherms reported in the literature. To reconcile these discrepancies, additional experiments were carried out and the results obtained supported the phase equilibrium data reported in the literature. The model-calculated enthalpies agree with subsequent first-principles-calculated values. The approach adopted in this study using phase equilibrium data of Ni-Al-Ru and the descriptions of Ni-Al and Ni-Ru to identify errors in the enthalpy of AlRu could be a general tool that could be used for other systems

  13. [Development of a structural equation model for children's adaptation in divorced families].

    Science.gov (United States)

    Shin, Sung Hee

    2010-02-01

    This study was designed to develop and test a structural model for children's adaptation in divorced families. The hypothetical model was constructed based on the Family Resilience Model by McCubbin and McCubbin. Data were collected using self-report questionnaires from 219 children (3-6th grade) in divorced families. The children attended one of 22 community agencies, 8 after-school programs, 3 elementary schools in three cities in South Korea. The collected data were analyzed using LISREL program to test the hypothetical model. The modified model was constructed by deleting four paths in accordance with the statistical and theoretical criteria. Compared to the hypothetical model, the revised one had a better fit to the data. Self-esteem, and beliefs about parental divorce had direct effects, and family communication and internal control had indirect effects on children's adaptation in divorced families. These variables explained 56% of the variance in children's adaptation. The modified model was supported by empirical data. This model could be applied to family nursing interventions with divorced families or any other suffering family transition. When working with children experiencing parental divorce, it is important for nurses to enhance children's self-esteem, family communication and to decrease children's negative beliefs about parental divorce to help in their adaptation.

  14. Data Modeling, Feature Extraction, and Classification of Magnetic and EMI Data, ESTCP Discrimination Study, Camp Sibert, AL. Demonstration Report

    Science.gov (United States)

    2008-09-01

    Figure 19. Misfit versus depth curve for the EM63 Pasion -Oldenburg model fit to anomaly 649. Two cases are considered: (i) using all the data which...selection of optimal models; c) Fitting of 2- and 3-dipole Pasion -Oldenburg models to the EM63 cued- interrogation data and selection of optimal models...Hart et al., 2001; Collins et al., 2001; Pasion & Oldenburg, 2001; Zhang et al., 2003a, 2003b; Billings, 2004). The most promising discrimination

  15. High Temperature Mechanical Constitutive Modeling of a High-Nb TiAl Alloy

    Directory of Open Access Journals (Sweden)

    DONG Chengli

    2018-02-01

    Full Text Available Uniaxial tensile, low cycle fatigue, fatigue-creep interaction and creep experiments of a novel high-Nb TiAl alloy (i.e. Ti-45Al-8Nb-0.2W-0.2B-0.02Y (atom fraction/% were conducted at 750℃ to obtain its tested data and curves. Based on Chaboche visco-plasticity unified constitutive model, Ohno-Wang modified non-linear kinematic hardening was introduced in Chaboche constitutive model to describe the cyclic hardening/softening, and Kachanov damage was coupled in Chaboche constitutive model to characterize the accelerated creep stage. The differential equations of the constitutive model discretized by explicit Euler method were compiled in to ABAQUS/UMAT to simulate the mechanical behavior of high-Nb TiAl alloy at different test conditions. The results show that Chaboche visco-plasticity unified constitutive model considering both Ohno-Wang modified non-linear kinematic hardening and Kachanov damage is able to simulate the uniaxial tensile, low cycle fatigue, fatigue-creep interaction and creep behavior of high-Nb TiAl alloy and has high accuracy.

  16. Family model of HIV care and treatment: a retrospective study in Kenya

    Science.gov (United States)

    2012-01-01

    Background Nyanza Province, Kenya, had the highest HIV prevalence in the country at 14.9% in 2007, more than twice the national HIV prevalence of 7.1%. Only 16% of HIV-infected adults in the country accurately knew their HIV status. Targeted strategies to reach and test individuals are urgently needed to curb the HIV epidemic. The family unit is one important portal. Methods A family model of care was designed to build on the strengths of Kenyan families. Providers use a family information table (FIT) to guide index patients through the steps of identifying family members at HIV risk, address disclosure, facilitate family testing, and work to enrol HIV-positive members and to prevent new infections. Comprehensive family-centred clinical services are built around these steps. To assess the approach, a retrospective study of patients receiving HIV care between September 2007 and September 2009 at Lumumba Health Centre in Kisumu was conducted. A random sample of FITs was examined to assess family reach. Results Through the family model of care, for each index patient, approximately 2.5 family members at risk were identified and 1.6 family members were tested. The approach was instrumental in reaching children; 61% of family members identified and tested were children. The approach also led to identifying and enrolling a high proportion of HIV- positive partners among those tested: 71% and 89%, respectively. Conclusions The family model of care is a feasible approach to broaden HIV case detection and service reach. The approach can be adapted for the local context and should continue to utilize index patient linkages, FIT adaption, and innovative methods to package services for families in a manner that builds on family support and enhances patient care and prevention efforts. Further efforts are needed to increase family member engagement. PMID:22353553

  17. RECONSTRUCTION OF 3D VECTOR MODELS OF BUILDINGS BY COMBINATION OF ALS, TLS AND VLS DATA

    Directory of Open Access Journals (Sweden)

    H. Boulaassal

    2012-09-01

    Full Text Available Airborne Laser Scanning (ALS, Terrestrial Laser Scanning (TLS and Vehicle based Laser Scanning (VLS are widely used as data acquisition methods for 3D building modelling. ALS data is often used to generate, among others, roof models. TLS data has proven its effectiveness in the geometric reconstruction of building façades. Although the operating algorithms used in the processing chain of these two kinds of data are quite similar, their combination should be more investigated. This study explores the possibility of combining ALS and TLS data for simultaneously producing 3D building models from bird point of view and pedestrian point of view. The geometric accuracy of roofs and façades models is different due to the acquisition techniques. In order to take these differences into account, the surfaces composing roofs and façades are extracted with the same algorithm of segmentation. Nevertheless the segmentation algorithm must be adapted to the properties of the different point clouds. It is based on the RANSAC algorithm, but has been applied in a sequential way in order to extract all potential planar clusters from airborne and terrestrial datasets. Surfaces are fitted to planar clusters, allowing edge detection and reconstruction of vector polygons. Models resulting from TLS data are obviously more accurate than those generated from ALS data. Therefore, the geometry of the roofs is corrected and adapted according to the geometry of the corresponding façades. Finally, the effects of the differences between raw ALS and TLS data on the results of the modeling process are analyzed. It is shown that such combination could be used to produce reliable 3D building models.

  18. Modeling a failure criterion for U-Mo/Al dispersion fuel

    Science.gov (United States)

    Oh, Jae-Yong; Kim, Yeon Soo; Tahk, Young-Wook; Kim, Hyun-Jung; Kong, Eui-Hyun; Yim, Jeong-Sik

    2016-05-01

    The breakaway swelling in U-Mo/Al dispersion fuel is known to be caused by large pore formation enhanced by interaction layer (IL) growth between fuel particles and Al matrix. In this study, a critical IL thickness was defined as a criterion for the formation of a large pore in U-Mo/Al dispersion fuel. Specifically, the critical IL thickness is given when two neighboring fuel particles come into contact with each other in the developed IL. The model was verified using the irradiation data from the RERTR tests and KOMO-4 test. The model application to full-sized sample irradiations such as IRISs, FUTURE, E-FUTURE, and AFIP-1 tests resulted in conservative predictions. The parametric study revealed that the fuel particle size and the homogeneity of the fuel particle distribution are influential for fuel performance.

  19. Thermodynamic modeling of the Al-U and Co-U systems

    International Nuclear Information System (INIS)

    Wang, J.; Liu, X.J.; Wang, C.P.

    2008-01-01

    The thermodynamic assessments of the Al-U and Co-U systems have been carried out by using the CALPHAD (Calculation of Phase Diagrams) method on the basis of the experimental data including thermodynamic properties and phase equilibria. Gibbs free energies of the solution phases were described by the subregular solution models with the Redlich-Kister equation, and those of the intermetallic compounds described by the sublattice models. A consistent set of thermodynamic parameters has been derived for describing the Gibbs free energies of each solution phase and intermetallic compounds in the Al-U and Co-U binary systems. The calculated phase diagrams and thermodynamic properties in the Al-U and Co-U systems are in good agreement with experimental data

  20. Modeling a failure criterion for U–Mo/Al dispersion fuel

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Jae-Yong, E-mail: tylor@kaeri.re.kr [Korea Atomic Energy Research Institute, 111, Daedeok-Daero 989 Beon-Gil, Yuseong-Gu, Daejeon 305-353 (Korea, Republic of); Kim, Yeon Soo [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Tahk, Young-Wook; Kim, Hyun-Jung; Kong, Eui-Hyun; Yim, Jeong-Sik [Korea Atomic Energy Research Institute, 111, Daedeok-Daero 989 Beon-Gil, Yuseong-Gu, Daejeon 305-353 (Korea, Republic of)

    2016-05-15

    The breakaway swelling in U–Mo/Al dispersion fuel is known to be caused by large pore formation enhanced by interaction layer (IL) growth between fuel particles and Al matrix. In this study, a critical IL thickness was defined as a criterion for the formation of a large pore in U–Mo/Al dispersion fuel. Specifically, the critical IL thickness is given when two neighboring fuel particles come into contact with each other in the developed IL. The model was verified using the irradiation data from the RERTR tests and KOMO-4 test. The model application to full-sized sample irradiations such as IRISs, FUTURE, E-FUTURE, and AFIP-1 tests resulted in conservative predictions. The parametric study revealed that the fuel particle size and the homogeneity of the fuel particle distribution are influential for fuel performance.

  1. Virtual walks in spin space: A study in a family of two-parameter models

    Science.gov (United States)

    Mullick, Pratik; Sen, Parongama

    2018-05-01

    We investigate the dynamics of classical spins mapped as walkers in a virtual "spin" space using a generalized two-parameter family of spin models characterized by parameters y and z [de Oliveira et al., J. Phys. A 26, 2317 (1993), 10.1088/0305-4470/26/10/006]. The behavior of S (x ,t ) , the probability that the walker is at position x at time t , is studied in detail. In general S (x ,t ) ˜t-αf (x /tα) with α ≃1 or 0.5 at large times depending on the parameters. In particular, S (x ,t ) for the point y =1 ,z =0.5 corresponding to the Voter model shows a crossover in time; associated with this crossover, two timescales can be defined which vary with the system size L as L2logL . We also show that as the Voter model point is approached from the disordered regions along different directions, the width of the Gaussian distribution S (x ,t ) diverges in a power law manner with different exponents. For the majority Voter case, the results indicate that the the virtual walk can detect the phase transition perhaps more efficiently compared to other nonequilibrium methods.

  2. Development of a molecular dynamic based cohesive zone model for prediction of an equivalent material behavior for Al/Al2O3 composite

    Energy Technology Data Exchange (ETDEWEB)

    Sazgar, A. [Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Movahhedy, M.R., E-mail: movahhed@sharif.edu [Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Mahnama, M. [School of Mechanical Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); Sohrabpour, S. [Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of)

    2017-01-02

    The interfacial behavior of composites is often simulated using a cohesive zone model (CZM). In this approach, a traction-separation (T-S) relation between the matrix and reinforcement particles, which is often obtained from experimental results, is employed. However, since the determination of this relation from experimental results is difficult, the molecular dynamics (MD) simulation may be used as a virtual environment to obtain this relation. In this study, MD simulations under the normal and shear loadings are used to obtain the interface behavior of Al/Al2O3 composite material and to derive the T-S relation. For better agreement with Al/Al2O3 interfacial behavior, the exponential form of the T-S relation suggested by Needleman [1] is modified to account for thermal effects. The MD results are employed to develop a parameterized cohesive zone model which is implemented in a finite element model of the matrix-particle interactions. Stress-strain curves obtained from simulations under different loading conditions and volume fractions show a close correlation with experimental results. Finally, by studying the effects of strain rate and volume fraction of particles in Al(6061-T6)/Al2O3 composite, an equivalent homogeneous model is introduced which can predict the overall behavior of the composite.

  3. Organizational complexity in family practice: a sociological model of a family practice group.

    Science.gov (United States)

    Tudor, J M

    1978-02-01

    The growth of a family practice goup is presented as a case study. Enlarging size and increasing functions require organizational change--from solo to collegial to bureaucratic to political systems. Organizational theory distinguishes between the characteristics and functions of individual, collegial, bureaucratic, and political organizations. Different styles and strategies are appropriate at different stages.

  4. FEM modeling on the compaction of Fe and Al composite powders

    Directory of Open Access Journals (Sweden)

    Han P.

    2015-01-01

    Full Text Available The compaction process of Fe and Al composite powders subjected to single action die compaction was numerically modeled by FEM method. The relationship between the overall relative density and compaction pressure of the compacts with various Al contents was firstly identified, and the influences of Al content on the local relative density, stress, and their distributions were studied. Then the compaction pressure effects on the above properties with fixed Al content were discussed. Furthermore, detailed flow behaviors of the composite powders during compaction and the relationship between the compaction pressure and the ejection force/spring back of the compact were analyzed. The results show that: (1 With each compaction pressure, higher relative density can be realized with the increase of Al content and the relative density distribution tends to be uniform; (2 When the Al content is fixed, higher compaction pressure can lead to composite compact with higher relative density, and the equivalent Von Mises stress in the central part of the compact increases gradually; (3 Convective flow occurs at the top and bottom parts of the compact close to the die wall, each indicates a different flow behavior; (4 The larger the compaction pressure for each case, the higher the residual elasticity, and the larger the ejection force needed.

  5. On Being a Father or Sibling in Light of the Humanbecoming Family Model.

    Science.gov (United States)

    Baumann, Steven L; Braddick, Marybeth

    2016-01-01

    The following article provides an updated discussion on two Parse grounded exploratory descriptive studies in light to her recently added humanbecoming family model. The comments of the fathers and siblings from the studies reveal that family life is unpredictable and that family relationships are paradoxical evolutional emergences of shifting hopes and dreams. The humanbecoming family model provided a useful way to consider fathering and being a sibling, as unexpected unfoldings of joy-sorrow reveal purposeful new possibilities. It guides health professionals to avoid the imposition of their views on what is best for the family in favor of bearing witness to the suffering and disappointments that unfold in family life. It is important to remain open to families' sources of meaning, courage, and hope in the moment. © The Author(s) 2015.

  6. An improved EEHEMT model for kink effect on AlGaN/GaN HEMT

    International Nuclear Information System (INIS)

    Cao Meng-Yi; Lu Yang; Chen Yong-He; Zheng Jia-Xin; Ma Xiao-Hua; Hao Yue; Wei Jia-Xing; Li Wei-Jun

    2014-01-01

    In this paper, a new current expression based on both the direct currect (DC) characteristics of the AlGaN/GaN high election mobility transistor (HEMT) and the hyperbolic tangent function tanh is proposed, by which we can describe the kink effect of the AlGaN/GaN HEMT well. Then, an improved EEHEMT model including the proposed current expression is presented. The simulated and measured results of I–V, S-parameter, and radio frequency (RF) large-signal characteristics are compared for a self-developed on-wafer AlGaN/GaN HEMT with ten gate fingers each being 0.4-μm long and 125-μm wide (Such an AlGaN/GaN HEMT is denoted as AlGaN/GaN HEMT (10 × 125 μm)). The improved large signal model simulates the I–V characteristic much more accurately than the original one, and its transconductance and RF characteristics are also in excellent agreement with the measured data. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

  7. Familial hypercholesterolaemia: a model of care for Australasia.

    Science.gov (United States)

    Watts, Gerald F; Sullivan, David R; Poplawski, Nicola; van Bockxmeer, Frank; Hamilton-Craig, Ian; Clifton, Peter M; O'Brien, Richard; Bishop, Warrick; George, Peter; Barter, Phillip J; Bates, Timothy; Burnett, John R; Coakley, John; Davidson, Patricia; Emery, Jon; Martin, Andrew; Farid, Waleed; Freeman, Lucinda; Geelhoed, Elizabeth; Juniper, Amanda; Kidd, Alexa; Kostner, Karam; Krass, Ines; Livingston, Michael; Maxwell, Suzy; O'Leary, Peter; Owaimrin, Amal; Redgrave, Trevor G; Reid, Nicola; Southwell, Lynda; Suthers, Graeme; Tonkin, Andrew; Towler, Simon; Trent, Ronald

    2011-10-01

    Familial hypercholesterolaemia (FH) is a dominantly inherited disorder present from birth that causes marked elevation in plasma cholesterol and premature coronary heart disease. There are at least 45,000 people with FH in Australia and New Zealand, but the vast majority remains undetected and those diagnosed with the condition are inadequately treated. To bridge this major gap in coronary prevention the FH Australasia Network (Australian Atherosclerosis Society) has developed a consensus model of care (MoC) for FH. The MoC is based on clinical experience, expert opinion, published evidence and consultations with a wide spectrum of stakeholders, and has been developed for use primarily by specialist centres intending starting a clinical service for FH. This MoC aims to provide a standardised, high-quality and cost-effective system of care that is likely to have the highest impact on patient outcomes. The MoC for FH is presented as a series of recommendations and algorithms focusing on the standards required for the detection, diagnosis, assessment and management of FH in adults and children. The process involved in cascade screening and risk notification, the backbone for detecting new cases of FH, is detailed. Guidance on treatment is based on risk stratifying patients, management of non-cholesterol risk factors, safe and effective use of statins, and a rational approach to follow-up of patients. Clinical and laboratory recommendations are given for genetic testing. An integrative system for providing best clinical care is described. This MoC for FH is not prescriptive and needs to be complemented by good clinical judgment and adjusted for local needs and resources. After initial implementation, the MoC will require critical evaluation, development and appropriate modification. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  8. MicroRNA Profiling Reveals Marker of Motor Neuron Disease in ALS Models.

    Science.gov (United States)

    Hoye, Mariah L; Koval, Erica D; Wegener, Amy J; Hyman, Theodore S; Yang, Chengran; O'Brien, David R; Miller, Rebecca L; Cole, Tracy; Schoch, Kathleen M; Shen, Tao; Kunikata, Tomonori; Richard, Jean-Philippe; Gutmann, David H; Maragakis, Nicholas J; Kordasiewicz, Holly B; Dougherty, Joseph D; Miller, Timothy M

    2017-05-31

    Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disorder marked by the loss of motor neurons (MNs) in the brain and spinal cord, leading to fatally debilitating weakness. Because this disease predominantly affects MNs, we aimed to characterize the distinct expression profile of that cell type to elucidate underlying disease mechanisms and to identify novel targets that inform on MN health during ALS disease time course. microRNAs (miRNAs) are short, noncoding RNAs that can shape the expression profile of a cell and thus often exhibit cell-type-enriched expression. To determine MN-enriched miRNA expression, we used Cre recombinase-dependent miRNA tagging and affinity purification in mice. By defining the in vivo miRNA expression of MNs, all neurons, astrocytes, and microglia, we then focused on MN-enriched miRNAs via a comparative analysis and found that they may functionally distinguish MNs postnatally from other spinal neurons. Characterizing the levels of the MN-enriched miRNAs in CSF harvested from ALS models of MN disease demonstrated that one miRNA (miR-218) tracked with MN loss and was responsive to an ALS therapy in rodent models. Therefore, we have used cellular expression profiling tools to define the distinct miRNA expression of MNs, which is likely to enrich future studies of MN disease. This approach enabled the development of a novel, drug-responsive marker of MN disease in ALS rodents. SIGNIFICANCE STATEMENT Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease in which motor neurons (MNs) in the brain and spinal cord are selectively lost. To develop tools to aid in our understanding of the distinct expression profiles of MNs and, ultimately, to monitor MN disease progression, we identified small regulatory microRNAs (miRNAs) that were highly enriched or exclusive in MNs. The signal for one of these MN-enriched miRNAs is detectable in spinal tap biofluid from an ALS rat model, where its levels change as disease

  9. Understanding Chinese American Adolescents' Developmental Outcomes: Insights from the Family Stress Model

    Science.gov (United States)

    Benner, Aprile D.; Kim, Su Yeong

    2010-01-01

    In this brief report, we investigated whether the Family Stress Model could be replicated with a sample of Chinese American families. Path analyses with 444 adolescents and their parents provided support for the model's generalizability. Specifically, mothers' and fathers' reports of economic status (i.e., income, financial, and job instability)…

  10. Exploring Multilevel Factors for Family Engagement in Home Visiting Across Two National Models.

    Science.gov (United States)

    Latimore, Amanda D; Burrell, Lori; Crowne, Sarah; Ojo, Kristen; Cluxton-Keller, Fallon; Gustin, Sunday; Kruse, Lakota; Hellman, Daniela; Scott, Lenore; Riordan, Annette; Duggan, Anne

    2017-07-01

    The associations of family, home visitor and site characteristics with family engagement within the first 6 months were examined. The variation in family engagement was also explored. Home visiting program participants were drawn from 21 Healthy Families America sites (1707 families) and 9 Nurse-Family Partnership sites (650 families) in New Jersey. Three-level nested generalized linear mixed models assessed the associations of family, home visitor and site characteristics with family receipt of a high dose of services in the first 6 months of enrollment. A family was considered to have received a high dose of service in the first 6 months of enrollment if they were active at 6 months and had received at least 50% of their expected visits in the first 6 months. In general, both home visiting programs engaged, at a relatively high level (Healthy Families America (HFA) 59%, Nurse-Family Partnership (NFP) 64%), with families demonstrating high-risk characteristics such as lower maternal education, maternal smoking, and maternal mental health need. Home visitor characteristics explained more of the variation (87%) in the receipt of services for HFA, while family characteristics explained more of the variation (75%) in the receipt of services for NFP. At the family level, NFP may improve the consistency with which they engage families by increasing retention efforts among mothers with lower education and smoking mothers. HFA sites seeking to improve engagement consistency should consider increasing the flexible in home visitor job responsibilities and examining the current expected-visit policies followed by home visitors on difficult-to-engage families.

  11. Risk Management for Ag Families: An Outreach Education Model for Improving Family Business Success

    OpenAIRE

    Bastian, Christopher; Nagler, Amy; Weigel, Randolph; Hewlett, John

    2010-01-01

    Did producers benefit from the risk management training program? Overall, responses to program evaluations indicate a positive impact on knowledge levels relating to risk management and the importance of incorporating family aspects into risk management decision making. Moreover, responses to the follow-up questionnaire indicate that respondents had taken steps to adjust their risk management, as it related to training provided in the workshop series. Every respondent indicated specific areas...

  12. Strategic Resources and Family Firm Performance

    NARCIS (Netherlands)

    Matser, I.A.

    2013-01-01

    Most companies in the Netherlands can be labeled as family firms (according to the GEEF definition (Mandle, 2008; Flören et al., 2010). The family firm can be regarded as an open system model comprising three overlapping, interacting, and interdependent subsystems: owners, family, and managers

  13. Solving the flavour problem in supersymmetric Standard Models with three Higgs families

    International Nuclear Information System (INIS)

    Howl, R.; King, S.F.

    2010-01-01

    We show how a non-Abelian family symmetry Δ 27 can be used to solve the flavour problem of supersymmetric Standard Models containing three Higgs families such as the Exceptional Supersymmetric Standard Model (E 6 SSM). The three 27-dimensional families of the E 6 SSM, including the three families of Higgs fields, transform in a triplet representation of the Δ 27 family symmetry, allowing the family symmetry to commute with a possible high energy E 6 symmetry. The Δ 27 family symmetry here provides a high energy understanding of the Z 2 H symmetry of the E 6 SSM, which solves the flavour changing neutral current problem of the three families of Higgs fields. The main phenomenological predictions of the model are tri-bi-maximal mixing for leptons, two almost degenerate LSPs and two almost degenerate families of colour triplet D-fermions, providing a clear prediction for the LHC. In addition the model predicts PGBs with masses below the TeV scale, and possibly much lighter, which appears to be a quite general and robust prediction of all models based on the D-term vacuum alignment mechanism.

  14. Absence of Nrf2 or its selective overexpression in neurons and muscle does not affect survival in ALS-linked mutant hSOD1 mouse models.

    Directory of Open Access Journals (Sweden)

    Marcelo R Vargas

    Full Text Available The nuclear factor erythroid 2-related factor 2 (Nrf2 governs the expression of antioxidant and phase II detoxifying enzymes. Nrf2 activation can prevent or reduce cellular damage associated with several types of injury in many different tissues and organs. Dominant mutations in Cu/Zn-superoxide dismutase (SOD1 cause familial forms of amyotrophic lateral sclerosis (ALS, a fatal disorder characterized by the progressive loss of motor neurons and subsequent muscular atrophy. We have previously shown that Nrf2 activation in astrocytes delays neurodegeneration in ALS mouse models. To further investigate the role of Nrf2 in ALS we determined the effect of absence of Nrf2 or its restricted overexpression in neurons or type II skeletal muscle fibers on symptoms onset and survival in mutant hSOD1 expressing mice. We did not observe any detrimental effect associated with the lack of Nrf2 in two different mutant hSOD1 animal models of ALS. However, restricted Nrf2 overexpression in neurons or type II skeletal muscle fibers delayed disease onset but failed to extend survival in hSOD1(G93A mice. These results highlight the concept that not only the pharmacological target but also the cell type targeted may be relevant when considering a Nrf2-mediated therapeutic approach for ALS.

  15. Using the Rasch Measurement Model in Psychometric Analysis of the Family Effectiveness Measure

    Science.gov (United States)

    McCreary, Linda L.; Conrad, Karen M.; Conrad, Kendon J.; Scott, Christy K; Funk, Rodney R.; Dennis, Michael L.

    2013-01-01

    Background Valid assessment of family functioning can play a vital role in optimizing client outcomes. Because family functioning is influenced by family structure, socioeconomic context, and culture, existing measures of family functioning--primarily developed with nuclear, middle class European American families--may not be valid assessments of families in diverse populations. The Family Effectiveness Measure was developed to address this limitation. Objectives To test the Family Effectiveness Measure with data from a primarily low-income African American convenience sample, using the Rasch measurement model. Method A sample of 607 adult women completed the measure. Rasch analysis was used to assess unidimensionality, response category functioning, item fit, person reliability, differential item functioning by race and parental status, and item hierarchy. Criterion-related validity was tested using correlations with five other variables related to family functioning. Results The Family Effectiveness Measure measures two separate constructs: The effective family functioning construct was a psychometrically sound measure of the target construct that was more efficient due to the deletion of 22 items. The ineffective family functioning construct consisted of 16 of those deleted items but was not as strong psychometrically. Items in both constructs evidenced no differential item functioning by race. Criterion-related validity was supported for both. Discussion In contrast to the prevailing conceptualization that family functioning is a single construct, assessed by positively and negatively worded items, use of the Rasch analysis suggested the existence of two constructs. While the effective family functioning is a strong and efficient measure of family functioning, the ineffective family functioning will require additional item development and psychometric testing. PMID:23636342

  16. Safety Analysis Report for Packaging (SARP): USA/9507/BLF (ERDA--AL), Model AL-M1

    International Nuclear Information System (INIS)

    Watkins, R.A.; Bertram, R.E.; Blauvelt, R.K.; Edling, D.A.; Flanagan, T.M.; Griffin, J.F.; Rhinehammer, T.B.

    1977-01-01

    The SARP includes structural integrity, thermal resistance, radiation shielding and radiological safety, nuclear criticality safety, and quality control of three insulated drum shipping containers identified as USA/9507/BLF (ERDA-AL), also called AL-M1, configurations 1, 3, and 5. Complete physical and technical descriptions of the packages are presented. Each package consists of an inner container centered within an insulated steel drum. The contents are plutonium-239 and uranium-235 in configurations-1 and -3. The configuration-5 package is intended for shipment of up to 100,000 Ci of tritiated water immobilized on a sorbent such as molecular sieve

  17. Family-Supportive Organization Perceptions, Multiple Dimensions of Work-Family Conflict, and Employee Satisfaction: A Test of Model across Five Samples

    Science.gov (United States)

    Lapierre, Laurent M.; Spector, Paul E.; Allen, Tammy D.; Poelmans, Steven; Cooper, Cary L.; O'Driscoll, Michael P.; Sanchez, Juan I.; Brough, Paula; Kinnunen, Ulla

    2008-01-01

    Using samples of managers drawn from five Western countries, we tested a theoretical model linking employees' perceptions of their work environment's family-supportiveness to six different dimensions of work-family conflict (WFC), and to their job satisfaction, family satisfaction, and life satisfaction. Our results are consistent with a causal…

  18. Multiscale modeling of θ' precipitation in Al-Cu binary alloys

    International Nuclear Information System (INIS)

    Vaithyanathan, V.; Wolverton, C.; Chen, L.Q.

    2004-01-01

    We present a multiscale model for studying the growth and coarsening of θ' precipitates in Al-Cu alloys. Our approach utilizes a novel combination of the mesoscale phase-field method with atomistic approaches such as first-principles total energy and linear response calculations, as well as a mixed-space cluster expansion coupled with Monte Carlo simulations. We give quantitative first-principles predictions of: (i) bulk energetics of the Al-Cu solid solution and θ ' precipitate phases, (ii) interfacial energies of the coherent and semi-coherent θ ' /Al interfaces, and (iii) stress-free misfit strains and coherency strain energies of the θ ' /Al system. These first-principles data comprise all the necessary energetic information to construct our phase-field model of microstructural evolution. Using our multiscale approach, we elucidate the effects of various energetic contributions on the equilibrium shape of θ ' precipitates, finding that both the elastic energy and interfacial energy anisotropy contributions play critical roles in determining the aspect ratio of θ ' precipitates. Additionally, we have performed a quantitative study of the morphology of two-dimensional multi-precipitate microstructures during growth and coarsening, and compared the calculated results with experimentally observed morphologies. Our multiscale first-principles/phase-field method is completely general and should therefore be applicable to a wide variety of problems in microstructural evolution

  19. Differential effects of phytotherapic preparations in the hSOD1 Drosophila melanogaster model of ALS

    Science.gov (United States)

    De Rose, Francescaelena; Marotta, Roberto; Talani, Giuseppe; Catelani, Tiziano; Solari, Paolo; Poddighe, Simone; Borghero, Giuseppe; Marrosu, Francesco; Sanna, Enrico; Kasture, Sanjay; Acquas, Elio; Liscia, Anna

    2017-01-01

    The present study was aimed at characterizing the effects of Withania somnifera (Wse) and Mucuna pruriens (Mpe) on a Drosophila melanogaster model for Amyotrophic Lateral Sclerosis (ALS). In particular, the effects of Wse and Mpe were assessed following feeding the flies selectively overexpressing the wild human copper, zinc-superoxide dismutase (hSOD1-gain-of-function) in Drosophila motoneurons. Although ALS-hSOD1 mutants showed no impairment in life span, with respect to GAL4 controls, the results revealed impairment of climbing behaviour, muscle electrophysiological parameters (latency and amplitude of ePSPs) as well as thoracic ganglia mitochondrial functions. Interestingly, Wse treatment significantly increased lifespan of hSDO1 while Mpe had not effect. Conversely, both Wse and Mpe significantly rescued climbing impairment, and also latency and amplitude of ePSPs as well as failure responses to high frequency DLM stimulation. Finally, mitochondrial alterations were any more present in Wse- but not in Mpe-treated hSOD1 mutants. Hence, given the role of inflammation in the development of ALS, the high translational impact of the model, the known anti-inflammatory properties of these extracts, and the viability of their clinical use, these results suggest that the application of Wse and Mpe might represent a valuable pharmacological strategy to counteract the progression of ALS and related symptoms. PMID:28102336

  20. Interfaith Education: A New Model for Today's Interfaith Families

    Science.gov (United States)

    Gordon, Sheila C.; Arenstein, Benjamin

    2017-01-01

    With societal changes rapidly transforming cultures that had been largely homogenous, today's multi-cultural--and in particular interfaith--families need new educational strategies to help them understand their cultural roots and identify and clarify what aspects of their heritages they wish to nurture and transmit to their children. This paper…

  1. High performance W-AlN cermet solar coatings designed by modelling calculations and deposited by DC magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Qi-Chu [School of Physics, The University of Sydney, Sydney, NSW 2006 (Australia); Shen, Y.G. [Department of Manufacturing Engineering and Engineering Management, City University of Hong Kong (Hong Kong)

    2004-01-25

    High solar performance W-AlN cermet solar coatings were designed using a numerical computer model and deposited experimentally. In the numerical calculations aluminium oxynitride (AlON) was used as ceramic component. The dielectric function and then complex refractive index of W-AlON cermet materials were calculated using the Sheng's approximation. The layer thickness and W metal volume fraction were optimised to achieve maximum photo-thermal conversion efficiency for W-AlON cermet solar coatings on an Al reflector with a surface AlON ceramic anti-reflection layer. Optimisation calculations show that the W-AlON cermet solar coatings with two and three cermet layers have nearly identical solar absorptance, emittance and photo-thermal conversion efficiency that are much better than those for films with one cermet layer. The optimised calculated AlON/W-AlON/Al solar coating film with two cermet layers has a high solar absorptance of 0.953 and a low hemispherical emittance of 0.051 at 80C for a concentration factor of 2. The AlN/W-AlN/Al solar selective coatings with two cermet layers were deposited using two metal target direct current magnetron sputtering technology. During the deposition of W-AlN cermet layer, both Al and W targets were run simultaneously in a gas mixture of argon and nitrogen. By substrate rotation a multi-sub-layer system consisting of alternating AlN ceramic and W metallic sub-layers was deposited that can be considered as a macro-homogeneous W-AlN cermet layer. A solar absorptance of 0.955 and nearly normal emittance of 0.056 at 80C have been achieved for deposited W-AlN cermet solar coatings.

  2. Structure and magnetic properties of the Al1-xGaxFeO3 family of oxides: A combined experimental and theoretical study

    International Nuclear Information System (INIS)

    Saha, Rana; Shireen, Ajmala; Bera, A.K.; Shirodkar, Sharmila N.; Sundarayya, Y.; Kalarikkal, Nandakumar; Yusuf, S.M.; Waghmare, Umesh V.; Sundaresan, A.; Rao, C.N.R

    2011-01-01

    Magnetic properties of the Al 1-x Ga x FeO 3 family of oxides crystallizing in a non-centrosymmetric space group have been investigated in detail along with structural aspects by employing X-ray and neutron diffraction, Moessbauer spectroscopy and other techniques. The study has revealed the occurrence of several interesting features related to unit cell parameters, site disorder and ionic size. Using first-principles density functional theory based calculations, we have attempted to understand how magnetic ordering and related properties in these oxides depend sensitively on disorder at the cation site. The origin and tendency of cations to disorder and the associated properties are traced to the local structure and ionic sizes. -- Graphical abstract: We have studied both experimentally and theoretically the important role of disorder at the cation site on magnetic and related properties of the Al 1-x Ga x FeO 3 family of oxides crystallizing in a non-centrosymmetric space group. Display Omitted Research highlights: → Interesting observations on cation site disorder, cell parameters and ionic size. → Cation site disorder explains magnetic ordering. → Demonstrates the importance of the A-site cations.

  3. Modelling Product Families for Product Configuration Systems with Product Variant Master

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

    2010-01-01

    This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC-cards...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...... experts and IT-developers, thus making it possible for the domain experts (e.g. engineers from product development) to express their knowledge in a form that is understandable both for the domain experts and the IT-developers. The product variant master and CRC-cards have currently been tested and further...

  4. The seconding values of family business in corporate branding – a tentative model

    OpenAIRE

    Blombäck, Anna

    2010-01-01

    Why and under what circumstances can references to family business influence marketing outcomes? This paper suggests we view “family business” as a brand of its own. Through secondary brand associations, this brand can distinguish corporate as well as product brands. Tentative models present the function of family business references in relation to corporate and product communications, and firm performance. Propositions to aid further research are proposed.

  5. Family of fish-eye-related models and their supersymmetric partners

    International Nuclear Information System (INIS)

    Makowski, Adam J.

    2010-01-01

    A large family of potentials related to the Maxwell fish-eye model is derived with the help of conformal mappings. It is shown that the whole family admits square-integrable E=0 solutions of the Schroedinger equation for discrete values of the coupling constant. A corresponding supersymmetric family of partner potentials to the preceding ones is derived as well. Some applications of the considered potentials are also discussed.

  6. Validation of a model of family caregiver communication types and related caregiver outcomes.

    Science.gov (United States)

    Wittenberg, Elaine; Kravits, Kate; Goldsmith, Joy; Ferrell, Betty; Fujinami, Rebecca

    2017-02-01

    Caring for the family is included as one of the eight domains of quality palliative care, calling attention to the importance of the family system and family communications about cancer during care and treatment of the disease. Previously, a model of family caregiver communication defined four caregiver communication types-Manager, Carrier, Partner, Lone-each with a unique communication pattern. The purpose of the present study was to extend the model of family caregiver communication in cancer care to further understand the impact of family communication burden on caregiving outcomes. This mixed-method study employed fieldnotes from a family caregiver intervention focused on quality of life and self-reported caregiver communication items to identify a specific family caregiver type. Caregiver types were then analyzed using outcome measures on psychological distress, skills preparedness, family inventory of needs, and quality-of-life domains. Corroboration between fieldnotes and self-reported communication for caregivers (n = 21, 16 women, mean age of 53 years) revealed a definitive classification of the four caregiver types (Manager = 6, Carrier = 5, Partner = 6, Lone = 4). Mean scores on self-reported communication items documented different communication patterns congruent with the theoretical framework of the model. Variation in caregiver outcomes measures confirmed the model of family caregiver communication types. Partner and Lone caregivers reported the lowest psychological distress, with Carrier caregivers feeling least prepared and Manager caregivers reporting the lowest physical quality of life. This study illustrates the impact of family communication on caregiving and increases our knowledge and understanding about the role of communication in caregiver burden. The research provides the first evidence-based validation for a family caregiver communication typology and its relationship to caregiver outcomes. Future research is needed to develop and test

  7. System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry

    Science.gov (United States)

    Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

    2016-01-01

    The construction industry is a demanding work environment where employees’ work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee’s work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee’s work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction. PMID:27801857

  8. System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry

    Directory of Open Access Journals (Sweden)

    Guangdong Wu

    2016-10-01

    Full Text Available The construction industry is a demanding work environment where employees’ work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee’s work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee’s work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC levels which are significantly greater than the family interference with work conflict (FIWC levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction.

  9. System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry.

    Science.gov (United States)

    Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

    2016-10-28

    The construction industry is a demanding work environment where employees' work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee's work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee's work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction.

  10. Living the academic life: A model for work-family conflict.

    Science.gov (United States)

    Beigi, Mina; Shirmohammadi, Melika; Kim, Sehoon

    2015-01-01

    Work-family conflict (WFC) is an inter-role conflict, which suggests that fulfilling expectations of family roles makes it difficult to satisfy expectations of work roles, and vice versa. Living an academic life includes balancing multiple work demands and family responsibilities, which may generate WFC for many faculty members. Researchers have emphasized the need for further studies of how faculty integrate work and family demands. This study explores WFC among Iranian faculty. We examine relationships among work hours, time spent with family, work-interference with family (WIF), family-interference with work (FIW), and job satisfaction. Faculty members from 25 Iranian public universities completed a questionnaire. Structural equation modeling was used to test hypotheses in a single model. Findings suggest a positive relationship between faculty weekly work hours and WIF, and between time spent with family and FIW. WIF correlated negatively with job satisfaction, and work hours correlated positively with job satisfaction. Time spent with family and FIW had no influence on job satisfaction, and spouse employment moderated the relationship between WIF and job satisfaction. Findings have implications for human resources and organizational development professionals seeking insight into how faculty members and other knowledge workers experience work-family interrelationships.

  11. Perfil de consulta en niños alérgicos provenientes de familias de bajos ingresos Profile of consultation of allergic children from low income families

    Directory of Open Access Journals (Sweden)

    Alain Raimundo Rodríguez-Orozco

    2007-09-01

    Full Text Available Las enfermedades alérgicas son una de las principales causas de atención médica en la infancia y su impacto se acentúa más en las familias de bajos ingresos. En un estudio descriptivo analítico se caracterizó el perfil de consulta del niño alérgico proveniente de familias mexicanas de bajos recursos económicos. Las enfermedades alérgicas predominaron en el sexo masculino y la edad escolar; el 71 % de los enfermos provenía de localidades urbanas. El asma fue el diagnóstico más frecuente (64 %, seguido de la rinitis alérgica (30 %, dermatitis atópica (6 % y urticaria (3 %. Las reactividades encontradas con más frecuencia en la prueba cutánea fueron Dermatofagoides farinae (77 %, Dermatofagoides pteronyssinus (60 %, Phleum pratense (20 %, gato (17 %, perro (14 % y Cynodon dactylon (11 %. El alto grado de disfunción familiar y la poca adhesión a tratamientos prolongados posibilitan la perpetuidad de los síntomas y el pronóstico incierto en este grupo de niños.Allergic diseases are one of the main causes for seeing the doctor in childhood and their impact is more acute in low income families. An analytical descriptive study characterized the profile of medical consultation of the allergic child from Mexican low income families. Allergic diseases prevailed in males and at school age, and 71 % of the sick children lived in urban settings. Asthma was the most frequent diagnosis (64 % followed by allergic rhinitis (30%, atopic dermatitis (6 % and urticaria (3 %. The most commom reactivity rates in the cutaneous test were Dermatofagoides farinae (77 %, Dermatofagoides pteronyssinus (60 %, Phleum pratense (20 %, cat (17 %, dog (14 % and Cynodon dactylon (11 %. The high level of family dysfunction and low adhesion to long therapies make it possible the persistence of symptoms and the uncertain prognosis in this group of children.

  12. Derivation of potential model for LiAlO2 by simple and effective optimization of model parameters

    International Nuclear Information System (INIS)

    Tsuchihira, H.; Oda, T.; Tanaka, S.

    2009-01-01

    Interatomic potentials of LiAlO 2 were constructed by a simple and effective method. In this method, the model function consists of multiple inverse polynomial functions with an exponential truncation function, and parameters in the potential model can be optimized as a solution of simultaneous linear equations. Potential energies obtained by ab initio calculation are used as fitting targets for model parameter optimization. Lattice constants, elastic properties, defect-formation energy, thermal expansions and the melting point were calculated under the constructed potential models. The results showed good agreement with experimental values and ab initio calculation results, which underscores the validity of the presented method.

  13. Family Environment and Childhood Obesity: A New Framework with Structural Equation Modeling

    OpenAIRE

    Huang, Hui; Wan Mohamed Radzi, Che Wan Jasimah bt; Salarzadeh Jenatabadi, Hashem

    2017-01-01

    The main purpose of the current article is to introduce a framework of the complexity of childhood obesity based on the family environment. A conceptual model that quantifies the relationships and interactions among parental socioeconomic status, family food security level, child’s food intake and certain aspects of parental feeding behaviour is presented using the structural equation modeling (SEM) concept. Structural models are analysed in terms of the direct and indirect connections among ...

  14. Emerging models for mobilizing family support for chronic disease management: a structured review.

    Science.gov (United States)

    Rosland, Ann-Marie; Piette, John D

    2010-03-01

    We identify recent models for programmes aiming to increase effective family support for chronic illness management and self-care among adult patients without significant physical or cognitive disabilities. We then summarize evidence regarding the efficacy for each model identified. Structured review of studies published in medical and psychology databases from 1990 to the present, reference review, general Web searches and conversations with family intervention experts. Review was limited to studies on conditions that require ongoing self-management, such as diabetes, chronic heart disease and rheumatologic disease. Programmes with three separate foci were identified: (1) Programmes that guide family members in setting goals for supporting patient self-care behaviours have led to improved implementation of family support roles, but have mixed success improving patient outcomes. (2) Programmes that train family in supportive communication techniques, such as prompting patient coping techniques or use of autonomy supportive statements, have successfully improved patient symptom management and health behaviours. (3) Programmes that give families tools and infrastructure to assist in monitoring clinical symptoms and medications are being conducted, with no evidence to date on their impact on patient outcomes. The next generation of programmes to improve family support for chronic disease management incorporate a variety of strategies. Future research can define optimal clinical situations for family support programmes, the most effective combinations of support strategies, and how best to integrate family support programmes into comprehensive models of chronic disease care.

  15. Modeling and measurement of the ALS U5 undulator end magnetic structures

    International Nuclear Information System (INIS)

    Humphries, D.; Halbach, K.; Hoyer, E.; Kincaid, B.; Marks, S.; Schlueter, R.

    1993-05-01

    The end structures for the ALS U5.0 undulators utilize a system of dual permanent magnet rotors intended to establish gap independent field performance. They may also be used for tuning of the first and second magnetic field integrals of these devices. The behavior of these structures has been studied by means of a two dimensional modeling with the POISSON Group of computer codes. A parametric study of the magnetic field distribution and first and second integrals of the fields has been conducted. In parallel, magnetic measurements of the final completed structures have been performed using an automated Hall probe measurement system. Results of the modeling and measurements are compared. Implications for tuning of the ends of the devices within the context of the electron beam parameters of the ALS are discussed

  16. Incorporating imperfect detection into joint models of communites: A response to Warton et al.

    Science.gov (United States)

    Beissinger, Steven R.; Iknayan, Kelly J.; Guillera-Arroita, Gurutzeta; Zipkin, Elise; Dorazio, Robert; Royle, Andy; Kery, Marc

    2016-01-01

    Warton et al. [1] advance community ecology by describing a statistical framework that can jointly model abundances (or distributions) across many taxa to quantify how community properties respond to environmental variables. This framework specifies the effects of both measured and unmeasured (latent) variables on the abundance (or occurrence) of each species. Latent variables are random effects that capture the effects of both missing environmental predictors and correlations in parameter values among different species. As presented in Warton et al., however, the joint modeling framework fails to account for the common problem of detection or measurement errors that always accompany field sampling of abundance or occupancy, and are well known to obscure species- and community-level inferences.

  17. A simple magnetic model for intermetallics of rare earths: application to PrAl2

    International Nuclear Information System (INIS)

    Ranke, P.J. von; Palermo, L.; Silva, X.A. da.

    1990-01-01

    A simplified description of crystal field for rare earth ion systems, taking in account the first two energy levels is presented. The Hamiltonian is constructed using wave functions of these levels and, the equation of magnetic state is derived. The model is applied to PrAl 2 using experimental data of magnetization versus temperature. The parameters of magnetic behaviour at T = OK and T = T c are analysed. (M.C.K.)

  18. Topological model of austenite-martensite interfaces in Cu-Al-Ni alloy

    Czech Academy of Sciences Publication Activity Database

    Ostapovets, Andriy; Zárubová, Niva; Paidar, Václav

    2012-01-01

    Roč. 122, č. 3 (2012), s. 493-496 ISSN 0587-4246. [International Symposium on Physics of Materials, ISPMA /12./. Praha, 04.09.2011-08.09.2011] R&D Projects: GA AV ČR IAA100100920 Institutional research plan: CEZ:AV0Z10100520 Keywords : CuAlNi * alloy * experimental data * in-situ * topological models * transmission electron microscopy Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.531, year: 2012

  19. Family bedside orientations: An innovative peer support model to enhance a culture of family-centred care at the Stollery Children's Hospital.

    Science.gov (United States)

    Wodinski, Lindsay M; Mattson McCrady, Heather M; Oswald, Christie M; Lyste, Nicole J M; Forbes, Karen L L

    2017-10-01

    This paper presents family bedside orientations, an innovative bedside peer support model for families of paediatric patients piloted in one unit at the Stollery Children's Hospital in Edmonton, Alberta. The model invites family members of former patients back to the hospital as volunteer peer mentors responsible for meeting one-on-one with current inpatient families to provide a listening presence, discuss patient safety practices and encourage families to participate in their child's care. Using qualitative and quantitative data collection methods, the model was evaluated over 1 year (December 2014 to December 2015). Data sources included peer mentor field notes (from 163 visits) detailing the number of family bedside orientations completed by peer mentors and how they interacted with families, as well as post-visit family (n=35) surveys, Hospital-Child Inpatient Experience Survey data, peer mentor (n=6) questionnaires, focus groups with unit staff (n=10) and interviews with members of the project leadership team (n=5). Our findings indicated that family bedside orientations became an established practice in the pilot unit and positively impacted family care experiences. We attribute these successes to championing and support from unit staff and our multidisciplinary project leadership team. We discuss how our team addressed family privacy and confidentiality while introducing peer mentors in the unit. We also highlight strategies used to integrate peer mentors as part of the staff team and enhance peer support culture in the pilot unit. Practical considerations for implementing this model in other paediatric environments are provided.

  20. Cost Optimization of Product Families using Analytic Cost Models

    DEFF Research Database (Denmark)

    Brunø, Thomas Ditlev; Nielsen, Peter

    2012-01-01

    This paper presents a new method for analysing the cost structure of a mass customized product family. The method uses linear regression and backwards selection to reduce the complexity of a data set describing a number of historical product configurations and incurred costs. By reducing the data...... set, the configuration variables which best describe the variation in product costs are identified. The method is tested using data from a Danish manufacturing company and the results indicate that the method is able to identify the most critical configuration variables. The method can be applied...... in product family redesign projects focusing on cost reduction to identify which modules contribute the most to cost variation and should thus be optimized....

  1. Diagnostic Perspectives on the Family: Process, Structural and Historical Contextual Models.

    Science.gov (United States)

    Levant, Ronald F.

    1983-01-01

    Describes diagnostic perspectives for viewing dysfunctional families. Presents three general types of models (process, structural, and historical) and organized them along a continuum from most descriptive to most inferential. Presented at the 39th Annual Conference of the American Association for Marriage and Family Therapy, October-November…

  2. Latent state-trait models for longitudinal family data : Investigating consistency in perceived support

    NARCIS (Netherlands)

    Loncke, Justine; Mayer, Axel; Eichelsheim, Veroni I.; Branje, Susan J.T.; Meeus, Wim H.J.; Koot, Hans M.; Buysse, Ann; Loeys, Tom

    2017-01-01

    Support is key to healthy family functioning. Using the family social relations model (SRM), it has already been shown that variability in perceived support is mostly attributed to individual perceiver effects. Little is known, however, as to whether those effects are stable or occasion-specific.

  3. Latent state-trait models for longitudinal family data investigating consistency in perceived support

    NARCIS (Netherlands)

    Loncke, Justine; Mayer, Axel; Eichelsheim, Veroni I.; Branje, Susan J. T.; Meeus, W.H.J.; Koot, Hans M.; Buysse, Ann; Loeys, Tom

    Support is key to healthy family functioning. Using the family social relations model (SRM), it has already been shown that variability in perceived support is mostly attributed to individual perceiver effects. Little is known, however, as to whether those effects are stable or occasion-specific.

  4. Family Adaptation to Stroke: A Metasynthesis of Qualitative Research based on Double ABCX Model

    Directory of Open Access Journals (Sweden)

    Ali Hesamzadeh, RN, PhD Student of Nursing

    2015-09-01

    Conclusions: The results of the study are in conformity with the tenets of the Double ABCX Model. Family adaptation is a dynamic process and the present study findings provide rich information on proper assessment and intervention to the practitioners working with families of stroke survivors.

  5. Rare Bs→γνν- Decay in Family Nonuniversal Z′ Model

    International Nuclear Information System (INIS)

    Şirvanlı, Berin Belma

    2015-01-01

    The rare B s →γνν - decay with polarized photon is studied in the framework of a family nonuniversal Z ′ model. The branching ratio and photon polarization asymmetry to the model parameters are calculated and compared with the Standard Model. Deviations from the Standard Model will indicate the presence of new physics

  6. Novel model of a AlGaN/GaN high electron mobility transistor based on an artificial neural network

    Science.gov (United States)

    Cheng, Zhi-Qun; Hu, Sha; Liu, Jun; Zhang, Qi-Jun

    2011-03-01

    In this paper we present a novel approach to modeling AlGaN/GaN high electron mobility transistor (HEMT) with an artificial neural network (ANN). The AlGaN/GaN HEMT device structure and its fabrication process are described. The circuit-based Neuro-space mapping (neuro-SM) technique is studied in detail. The EEHEMT model is implemented according to the measurement results of the designed device, which serves as a coarse model. An ANN is proposed to model AlGaN/GaN HEMT based on the coarse model. Its optimization is performed. The simulation results from the model are compared with the measurement results. It is shown that the simulation results obtained from the ANN model of AlGaN/GaN HEMT are more accurate than those obtained from the EEHEMT model. Project supported by the National Natural Science Foundation of China (Grant No. 60776052).

  7. Novel model of a AlGaN/GaN high electron mobility transistor based on an artificial neural network

    International Nuclear Information System (INIS)

    Cheng Zhi-Qun; Hu Sha; Liu Jun; Zhang Qi-Jun

    2011-01-01

    In this paper we present a novel approach to modeling AlGaN/GaN high electron mobility transistor (HEMT) with an artificial neural network (ANN). The AlGaN/GaN HEMT device structure and its fabrication process are described. The circuit-based Neuro-space mapping (neuro-SM) technique is studied in detail. The EEHEMT model is implemented according to the measurement results of the designed device, which serves as a coarse model. An ANN is proposed to model AlGaN/GaN HEMT based on the coarse model. Its optimization is performed. The simulation results from the model are compared with the measurement results. It is shown that the simulation results obtained from the ANN model of AlGaN/GaN HEMT are more accurate than those obtained from the EEHEMT model. (condensed matter: structural, mechanical, and thermal properties)

  8. Family Models for Earning and Caring: Implications for Child Care and for Family Policy

    Directory of Open Access Journals (Sweden)

    Ravanera, Zenaida

    2009-01-01

    Full Text Available AbstractCanadian families have changed, in part due to an economy that provides more work opportunities for women, and a cultural orientation that values equal opportunity and diversity infamilies. In spite of the change, both quantitative and qualitative evidence suggest a continued preference for mothers to spend considerable time with children, especially in the infant andtoddler years. Thus, in an average couple, the presence of young children in the home brings wives to reduce their paid work and husbands to increase their paid work. Our reading of parentalpreferences suggests an interest in more services for young children in the form of early childhood education and child care, but also an interest in policies that would allow parents to spend more time with children through parental leaves, part-time work with good benefits, and subsidies that supplement market income. Many options available to two-parent families are often less feasible for lone parents, giving a higher priority to child care.RésuméLa famille canadiennes a changé, dû en partie à une économie qui offre plus de possibilités d’emploi pour les femmes, et à une tendance culturelle qui valorise l’égalité des chances et la diversité dans les familles. En dépit de ces changements, les preuves quantitatives et qualitatives suggèrent une préférence continue pour les mères de passer plus de temps avec les enfants, particulièrement quand il s’agit de nouveau-nés ou d’enfants en bas âge. Donc, pour un couple moyen, la présence de jeunes enfants au foyer pousse les femmes à réduire leurs emplois rémunérés et les maris à augmenter les leurs. Notre étude des préférences parentales suggère un intérêt pour un accroissement des services pour jeunes enfants sous la forme d’éducation préscolaire et de garde d’enfants, et aussi un intérêt pour des politiques qui permettraient aux parents de passer plus de temps avec leurs enfants tels que cong

  9. Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuels High Impact Problem: Coordinate Multiscale FeCrAl Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Gamble, K. A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hales, J. D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Y. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Andersson, D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Capolungo, L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wirth, B. D. [Univ. of Tennessee, Knoxville, TN (United States)

    2017-07-26

    Since the events at the Fukushima-Daiichi nuclear power plant in March 2011 significant research has unfolded at national laboratories, universities and other institutions into alternative materials that have potential enhanced ac- cident tolerance when compared to traditional UO2 fuel zircaloy clad fuel rods. One of the potential replacement claddings are iron-chromium-alunimum (FeCrAl) alloys due to their increased oxidation resistance [1–4] and higher strength [1, 2]. While the oxidation characteristics of FeCrAl are a benefit for accident tolerance, the thermal neu- tron absorption cross section of FeCrAl is about ten times that of Zircaloy. This neutronic penalty necessitates thinner cladding. This allows for slightly larger pellets to give the same cold gap width in the rod. However, the slight increase in pellet diameter is not sufficient to compensate for the neutronic penalty and enriching the fuel beyond the current 5% limit appears to be necessary [5]. Current estimates indicate that this neutronic penalty will impose an increase in fuel cost of 15-35% [1, 2]. In addition to the neutronic disadvantage, it is anticipated that tritium release to the coolant will be larger because the permeability of hydrogen in FeCrAl is about 100 times higher than in Zircaloy [6]. Also, radiation-induced hardening and embrittlement of FeCrAl need to be fully characterized experimentally [7]. Due to the aggressive development schedule for inserting some of the potential materials into lead test assemblies or rods by 2022 [8] multiscale multiphysics modeling approaches have been used to provide insight into these the use of FeCrAl as a cladding material. The purpose of this letter report is to highlight the multiscale modeling effort for iron-chromium-alunimum (FeCrAl) cladding alloys as part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program through its Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The approach taken throughout the HIP is to

  10. Lou Gehrig's Disease (ALS)

    Science.gov (United States)

    ... disease. Who Gets ALS? Although this disease can strike anyone, ALS is extremely rare in kids. According ... home to provide care that the family cannot handle alone. Living With Lou Gehrig's Disease Living with ...

  11. ALS and TLS data fusion in cultural heritage documentation and modeling

    Directory of Open Access Journals (Sweden)

    A. Fryskowska

    2015-08-01

    Full Text Available One of the most important aspects of documenting cultural heritage sites is acquiring detailed and accurate data. A popular method of storing 3D information about historical structures is using 3D models. These models are built based on terrestrial or aerial laser scanning data. These methods are seldom used together. Historical buildings usually have a very complex design, therefore the input data, on the basis of which their 3D models are being built, must provide a high enough accuracy to model these complexities. The data processing methods used, as well as the modeling algorithms implemented, should be highly automated and universal. The main of the presented research was to analyze and compare various methods for extracting matching points. The article presents the results of combining data from ALS and TLS using reference points extracted both manually and automatically. Finally, the publication also includes an analysis of the accuracy of the data merging process.

  12. Correction of Flow Curves and Constitutive Modelling of a Ti-6Al-4V Alloy

    Directory of Open Access Journals (Sweden)

    Ming Hu

    2018-04-01

    Full Text Available Isothermal uniaxial compressions of a Ti-6Al-4V alloy were carried out in the temperature range of 800–1050 °C and strain rate range of 0.001–1 s−1. The effects of friction between the specimen and anvils as well as the increase in temperature caused by the high strain rate deformation were considered, and flow curves were corrected as a result. Constitutive models were discussed based on the corrected flow curves. The correlation coefficient and average absolute relative error for the strain compensated Arrhenius-type constitutive model are 0.986 and 9.168%, respectively, while the values for a modified Johnson-Cook constitutive model are 0.924 and 22.673%, respectively. Therefore, the strain compensated Arrhenius-type constitutive model has a better prediction capability than a modified Johnson-Cook constitutive model.

  13. Um modelo para orientação familial em oligofrenias A model for familial orientation on mental retardation

    Directory of Open Access Journals (Sweden)

    Aguinaldo Gonçalves

    1976-03-01

    Full Text Available Após revisão de teorias e evidências sobre a etiologia das oligofrenias, são apresentados casos clínicos de oligofrênicos atendidos em serviço de Genética Médica, os quais servem de substrato para a proposição de um modelo de Aconselhamento Genético, que os classifica em ambiental, gênica, cromossômica, familial e idiopática.Theories and evidences on etiology of mental retardation are presented. Five cases of mental retardation from a Clinical Genetics Service are reported, as basis for an etiological model on mental retardation, quite operational in genetic counseling and familial orientation.

  14. Developing a Family-Centered Care Model for Critical Care After Pediatric Traumatic Brain Injury.

    Science.gov (United States)

    Moore, Megan; Robinson, Gabrielle; Mink, Richard; Hudson, Kimberly; Dotolo, Danae; Gooding, Tracy; Ramirez, Alma; Zatzick, Douglas; Giordano, Jessica; Crawley, Deborah; Vavilala, Monica S

    2015-10-01

    This study examined the family experience of critical care after pediatric traumatic brain injury in order to develop a model of specific factors associated with family-centered care. Qualitative methods with semi-structured interviews were used. Two level 1 trauma centers. Fifteen mothers of children who had an acute hospital stay after traumatic brain injury within the last 5 years were interviewed about their experience of critical care and discharge planning. Participants who were primarily English, Spanish, or Cantonese speaking were included. None. Content analysis was used to code the transcribed interviews and develop the family-centered care model. Three major themes emerged: 1) thorough, timely, compassionate communication, 2) capacity building for families, providers, and facilities, and 3) coordination of care transitions. Participants reported valuing detailed, frequent communication that set realistic expectations and prepared them for decision making and outcomes. Areas for capacity building included strategies to increase provider cultural humility, parent participation in care, and institutional flexibility. Coordinated care transitions, including continuity of information and maintenance of partnerships with families and care teams, were highlighted. Participants who were not primarily English speaking reported particular difficulty with communication, cultural understanding, and coordinated transitions. This study presents a family-centered traumatic brain injury care model based on family perspectives. In addition to communication and coordination strategies, the model offers methods to address cultural and structural barriers to meeting the needs of non-English-speaking families. Given the stress experienced by families of children with traumatic brain injury, careful consideration of the model themes identified here may assist in improving overall quality of care to families of hospitalized children with traumatic brain injury.

  15. Longitudinal and Integrative Tests of Family Stress Model Effects on Mexican-Origin Adolescents

    Science.gov (United States)

    White, Rebecca M. B.; Liu, Yu; Nair, Rajni L.; Tein, Jenn-Yun

    2015-01-01

    The family stress model represents a common framework through which to examine the effects of environmental stressors on adolescent adjustment. The model suggests that economic and neighborhood stressors influence youth adjustment via disruptions to parenting. Incorporating integrative developmental theory, we examined the degree to which parents’ cultural value orientations mitigated the effects of stressors on parenting disruptions and the degree to which environmental adversity qualified the effect of parenting on adolescent adjustment. We tested the hypothesized Integrative Family Stress Model longitudinally in a sample of mother-youth dyads (N = 749) and father-youth dyads (N = 467) from Mexican origin families, across three times points spanning early to middle adolescence. Providing the first longitudinal evidence of family stress mediated effects, mothers’ perceptions of economic pressure were associated with increases in adolescent externalizing symptoms five years later via intermediate increases in harsh parenting. The remaining findings supported the notion that integrative developmental theory can inform family stress model hypothesis testing that is culturally and contextually relevant for wide range of diverse families and youth. For example, fathers’ perceptions of economic pressure and neighborhood danger had important implications for adolescent internalizing, via reductions in paternal warmth, but only at certain levels of neighborhood adversity. Mothers’ familism value orientations mitigated the effects of economic pressure on maternal warmth, protecting their adolescents from experiencing developmental costs associated with environmental stressors. Results are discussed in terms of identifying how integrative developmental theory intersects with the family stress model to set diverse youth on different developmental pathways. PMID:25751100

  16. A moral house divided: How idealized family models impact political cognition.

    Science.gov (United States)

    Feinberg, Matthew; Wehling, Elisabeth

    2018-01-01

    People's political attitudes tend to fall into two groups: progressive and conservative. Moral Politics Theory asserts that this ideological divide is the product of two contrasting moral worldviews, which are conceptually anchored in individuals' cognitive models about ideal parenting and family life. These models, here labeled the strict and nurturant models, serve as conceptual templates for how society should function, and dictate whether one will endorse more conservative or progressive positions. According to Moral Politics Theory, individuals map their parenting ideals onto the societal domain by engaging the nation-as-family metaphor, which facilitates reasoning about the abstract social world (the nation) in terms of more concrete world experience (family life). In the present research, we conduct an empirical examination of these core assertions of Moral Politics Theory. In Studies 1-3, we experimentally test whether family ideals directly map onto political attitudes while ruling out alternative explanations. In Studies 4-5, we use both correlational and experimental methods to examine the nation-as-family metaphor's role in facilitating the translation of family beliefs into societal beliefs and, ultimately, political attitudes. Overall, we found consistent support for Moral Politics Theory's assertions that family ideals directly impact political judgment, and that the nation-as-family metaphor serves a mediating role in this phenomenon.

  17. A moral house divided: How idealized family models impact political cognition

    Science.gov (United States)

    Feinberg, Matthew; Wehling, Elisabeth

    2018-01-01

    People’s political attitudes tend to fall into two groups: progressive and conservative. Moral Politics Theory asserts that this ideological divide is the product of two contrasting moral worldviews, which are conceptually anchored in individuals’ cognitive models about ideal parenting and family life. These models, here labeled the strict and nurturant models, serve as conceptual templates for how society should function, and dictate whether one will endorse more conservative or progressive positions. According to Moral Politics Theory, individuals map their parenting ideals onto the societal domain by engaging the nation-as-family metaphor, which facilitates reasoning about the abstract social world (the nation) in terms of more concrete world experience (family life). In the present research, we conduct an empirical examination of these core assertions of Moral Politics Theory. In Studies 1–3, we experimentally test whether family ideals directly map onto political attitudes while ruling out alternative explanations. In Studies 4–5, we use both correlational and experimental methods to examine the nation-as-family metaphor’s role in facilitating the translation of family beliefs into societal beliefs and, ultimately, political attitudes. Overall, we found consistent support for Moral Politics Theory’s assertions that family ideals directly impact political judgment, and that the nation-as-family metaphor serves a mediating role in this phenomenon. PMID:29641618

  18. Examining the Possibilities of Identifying and Modeling Correlations between Product Families and Business Processes

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    2010-01-01

    In order for companies to make well founded decisions on the product family makeup, an understanding of the correlation between the complexity of the product family and business processes is required, though it is often not available. This paper investigates the potential of using the Product...... Variant Master (PVM) modeling technique and Process Flow Charts in combination, to analyze the correlation between complexity in product families and business processes. The approach is based on a visual modeling of the product assortment and the business processes. It is hypothesized that the combined...... use of the modeling techniques can allow for analysis and communication of the product family and business processes; as well as the connections between the two, with the potential of creating a single combined model. A case from a Danish industrial company is used for the purpose of the investigation...

  19. An Efficient Technique for Bayesian Modelling of Family Data Using the BUGS software

    Directory of Open Access Journals (Sweden)

    Harold T Bae

    2014-11-01

    Full Text Available Linear mixed models have become a popular tool to analyze continuous data from family-based designs by using random effects that model the correlation of subjects from the same family. However, mixed models for family data are challenging to implement with the BUGS (Bayesian inference Using Gibbs Sampling software because of the high-dimensional covariance matrix of the random effects. This paper describes an efficient parameterization that utilizes the singular value decomposition of the covariance matrix of random effects, includes the BUGS code for such implementation, and extends the parameterization to generalized linear mixed models. The implementation is evaluated using simulated data and an example from a large family-based study is presented with a comparison to other existing methods.

  20. Are Emotions Transmitted From Work to Family? A Crossover Model of Psychological Contract Breach.

    Science.gov (United States)

    Liang, Huai-Liang

    2018-01-01

    Based on affective events theory and the crossover model, this study examines the effect of psychological contract breach on employee dysfunctional behavior and partner family undermining and explores the crossover effect of employee dysfunctional behavior on partner family undermining in work-family issues. This study collected 370 employee-partner dyads (277 male employees, 93 female employees, M age = 43.59 years) from a large manufacturing organization. The results of this study support the conception that employees' psychological contract breach results in frustration in the workplace. In addition, mediation analysis results reveal that psychological contract breach relates to employee dysfunctional behavior in the workplace. The findings show that partners' psychological strain mediates the relationship between employee dysfunctional behavior and partner family undermining. Furthermore, these findings provide investigations for the crossover model to display the value of psychological contract breach in family issues.

  1. LMX, Breach Perceptions, Work-Family Conflict, and Well-Being: A Mediational Model.

    Science.gov (United States)

    Hill, Rachel T; Morganson, Valerie J; Matthews, Russell A; Atkinson, Theresa P

    2016-01-01

    Despite research advances, work-family scholars still lack an understanding of how leadership constructs relate to an employee's ability to effectively manage the work-family interface. In addition, there remains a need to examine the process through which leadership and work-family conflict influence well-being outcomes. Using a sample of 312 workers, a mediated process model grounded in social exchange theory is tested wherein the authors seek to explain how leaders shape employee perceptions, which, in turn, impact organizational fulfillment of expectations (i.e., psychological contract breach), work-family conflict, and well-being. A fully latent structural equation model was used to test study hypotheses, all of which were supported. Building on existing theory, findings suggest that the supervisor plays a critical role as a frontline representative for the organization and that work-family conflict is reduced and well-being enhanced through a process of social exchange between the supervisor and worker.

  2. Modelling of the Effectiveness of Al-Ti-B Refiners in Commercial Purity Aluminium

    Science.gov (United States)

    Bunn, A. M.; Evans, P. V.; Bristow, D. J.; Greer, A. L.

    Al-5Ti-1B (wt.%) alloys are effective grain refiners for DC-cast aluminium although as few as 1% of the TiB2 particles added to the melt nucleate grains. The aim of this work is to develop quantitative modelling for prediction of grain sizes in commercial purity aluminium. In this way the low efficiency of refiners can be understood, ultimately to clarify the design rules for a more effective refiner. The modelling focuses on the role of particle size distribution. This is in conjunction with measurements (by scanning electron microscopy and image analysis) of the particle size distributions in commercial Al-5Ti-1B refiners known to have differing performances. The undercooling required for heterogeneous nucleation of oc-Al on the surface of potent TiB2 particles is extremely low. Accordingly, the modelling is based on the assumption that the critical step for a particle to behave as an active growth centre is that required to initiate free growth from the particle surface, rather than the initial heterogeneous nucleation event. It is considered that further initiation of free growth of crystals is stopped by the onset of recalescence in the melt during solidification. Only those particles which are active growth centres at the point of recalescence will contribute towards the final grain size. Negligible interference between particles and spherical growth up to the point of recalescence are assumed; these assumptions are rigorously tested. The model tests the effect of varying the particle size distribution by using measured distributions from `good' and `poor' refiners. The variation of grain size with addition rate of refiner is examined. The model predicts an effective saturation, beyond which further addition has little effect. In general, good agreement is found between the grain-size predictions and conventional grain-refining tests.

  3. Relationship between Family Adaptability, Cohesion and Adolescent Problem Behaviors: Curvilinearity of Circumplex Model

    OpenAIRE

    Joh, Ju Youn; Kim, Sun; Park, Jun Li; Kim, Yeon Pyo

    2013-01-01

    Background The Family Adaptability and Cohesion Evaluation Scale (FACES) III using the circumplex model has been widely used in investigating family function. However, the criticism of the curvilinear hypothesis of the circumplex model has always been from an empirical point of view. This study examined the relationship between adolescent adaptability, cohesion, and adolescent problem behaviors, and especially testing the consistency of the curvilinear hypotheses with FACES III. Methods We us...

  4. Family Food Security and Children’s Environment: A Comprehensive Analysis with Structural Equation Modeling

    OpenAIRE

    Che Wan Jasimah bt Wan Mohamed Radzi; Huang Hui; Nur Anisah Binti Mohamed @ A. Rahman; Hashem Salarzadeh Jenatabadi

    2017-01-01

    Structural Equation Modeling (SEM) has been used extensively in sustainability studies to model relationships among latent and manifest variables. This paper provides a tutorial exposition of the SEM approach in food security studies and introduces a basic framework based on family food security and children’s environment sustainability. This framework includes family food security and three main concepts representing children’s environment, including children’s BMI, health, and school perfor...

  5. Ballistic Impact Testing of Aluminum 2024 and Titanium 6Al-4V for Material Model Development

    Science.gov (United States)

    Pereira, J. Michael; Revilock, Duane M.; Ruggeri, Charles R.; Emmerling, William C.; Altobelli, Donald J.

    2012-01-01

    An experimental program is underway to develop a consistent set of material property and impact test data, and failure analysis, for a variety of materials that can be used to develop improved impact failure and deformation models. Unique features of this set of data are that all material property information and impact test results are obtained using identical materials, the test methods and procedures are extensively documented and all of the raw data is available. This report describes ballistic impact testing which has been conducted on aluminum (Al) 2024 and titanium (Ti) 6Al-4vanadium (V) sheet and plate samples of different thicknesses and with different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade.

  6. Modeling of wear behavior of Al/B_4C composites produced by powder metallurgy

    International Nuclear Information System (INIS)

    Sahin, Ismail; Bektas, Asli; Guel, Ferhat; Cinci, Hanifi

    2017-01-01

    Wear characteristics of composites, Al matrix reinforced with B_4C particles percentages of 5, 10,15 and 20 produced by the powder metallurgy method were studied in this study. For this purpose, a mixture of Al and B_4C powders were pressed under 650 MPa pressure and then sintered at 635 C. The analysis of hardness, density and microstructure was performed. The produced samples were worn using a pin-on-disk abrasion device under 10, 20 and 30 N load through 500, 800 and 1200 mesh SiC abrasive papers. The obtained wear values were implemented in an artificial neural network (ANN) model having three inputs and one output using feed forward backpropagation Levenberg-Marquardt algorithm. Thus, the optimum wear conditions and hardness values were determined.

  7. Modeling of wear behavior of Al/B{sub 4}C composites produced by powder metallurgy

    Energy Technology Data Exchange (ETDEWEB)

    Sahin, Ismail; Bektas, Asli [Gazi Univ., Ankara (Turkey). Dept. of Industrial Design Engineering; Guel, Ferhat; Cinci, Hanifi [Gazi Univ., Ankara (Turkey). Dept. of Materials and Metallurgy Engineering

    2017-06-01

    Wear characteristics of composites, Al matrix reinforced with B{sub 4}C particles percentages of 5, 10,15 and 20 produced by the powder metallurgy method were studied in this study. For this purpose, a mixture of Al and B{sub 4}C powders were pressed under 650 MPa pressure and then sintered at 635 C. The analysis of hardness, density and microstructure was performed. The produced samples were worn using a pin-on-disk abrasion device under 10, 20 and 30 N load through 500, 800 and 1200 mesh SiC abrasive papers. The obtained wear values were implemented in an artificial neural network (ANN) model having three inputs and one output using feed forward backpropagation Levenberg-Marquardt algorithm. Thus, the optimum wear conditions and hardness values were determined.

  8. Understanding H isotope adsorption and absorption of Al-alloys using modeling and experiments (LDRD: #165724)

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Donald K. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Zhou, Xiaowang [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Karnesky, Richard A. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Kolasinski, Robert [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Foster, Michael E. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Thurmer, Konrad [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Chao, Paul [Carnegie Mellon University, Pittsburgh, PA (United States); Epperly, Ethan Nicholas [Livermore Valley Charter Preparatory High School, Livermore, CA (United States); Zimmerman, Jonathan A. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Wong, Bryan M. [Univ. of California, Riverside, CA (United States); Sills, Ryan B. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States)

    2015-09-01

    Current austenitic stainless steel storage reservoirs for hydrogen isotopes (e.g. deuterium and tritium) have performance and operational life-limiting interactions (e.g. embrittlement) with H-isotopes. Aluminum alloys (e.g.AA2219), alternatively, have very low H-isotope solubilities, suggesting high resistance towards aging vulnerabilities. This report summarizes the work performed during the life of the Lab Directed Research and Development in the Nuclear Weapons investment area (165724), and provides invaluable modeling and experimental insights into the interactions of H isotopes with surfaces and bulk AlCu-alloys. The modeling work establishes and builds a multi-scale framework which includes: a density functional theory informed bond-order potential for classical molecular dynamics (MD), and subsequent use of MD simulations to inform defect level dislocation dynamics models. Furthermore, low energy ion scattering and thermal desorption spectroscopy experiments are performed to validate these models and add greater physical understanding to them.

  9. A Frank mixture copula family for modeling higher-order correlations of neural spike counts

    International Nuclear Information System (INIS)

    Onken, Arno; Obermayer, Klaus

    2009-01-01

    In order to evaluate the importance of higher-order correlations in neural spike count codes, flexible statistical models of dependent multivariate spike counts are required. Copula families, parametric multivariate distributions that represent dependencies, can be applied to construct such models. We introduce the Frank mixture family as a new copula family that has separate parameters for all pairwise and higher-order correlations. In contrast to the Farlie-Gumbel-Morgenstern copula family that shares this property, the Frank mixture copula can model strong correlations. We apply spike count models based on the Frank mixture copula to data generated by a network of leaky integrate-and-fire neurons and compare the goodness of fit to distributions based on the Farlie-Gumbel-Morgenstern family. Finally, we evaluate the importance of using proper single neuron spike count distributions on the Shannon information. We find notable deviations in the entropy that increase with decreasing firing rates. Moreover, we find that the Frank mixture family increases the log likelihood of the fit significantly compared to the Farlie-Gumbel-Morgenstern family. This shows that the Frank mixture copula is a useful tool to assess the importance of higher-order correlations in spike count codes.

  10. Modeling creep deformation of a two-phase TiAI/Ti3Al alloy with a lamellar microstructure

    Science.gov (United States)

    Bartholomeusz, Michael F.; Wert, John A.

    1994-10-01

    A two-phase TiAl/Ti3Al alloy with a lamellar microstructure has been previously shown to exhibit a lower minimum creep rate than the minimum creep rates of the constituent TiAl and Ti3Al single-phase alloys. Fiducial-line experiments described in the present article demonstrate that the creep rates of the constituent phases within the two-phase TiAl/Ti3Al lamellar alloy tested in compression are more than an order of magnitude lower than the creep rates of single-phase TiAl and Ti3Al alloys tested in compression at the same stress and temperature. Additionally, the fiducial-line experiments show that no interfacial sliding of the phases in the TiAl/Ti3Al lamellar alloy occurs during creep. The lower creep rate of the lamellar alloy is attributed to enhanced hardening of the constituent phases within the lamellar microstructure. A composite-strength model has been formulated to predict the creep rate of the lamellar alloy, taking into account the lower creep rates of the constituent phases within the lamellar micro-structure. Application of the model yields a very good correlation between predicted and experimentally observed minimum creep rates over moderate stress and temperature ranges.

  11. Characterization of the hierarchical microstructure of a Ni-Al-Ti model alloy; Charakterisierung der hierarchischen Mikrostruktur einer Ni-Al-Ti Modell-Legierung

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, Florian

    2014-02-28

    Phase separation of γ{sup '} precipitates determines the microstructure and mechanical properties of nickel-based superalloys. Upon ageing, γ spheres form inside ordered (L1{sub 2}) γ{sup '} precipitates, undergo a morphological change to plates and finally split the γ{sup '} precipitates. To clarify the identity of the insufficiently characterized γ particles and to elucidate their influence on the evolution of the microstructure and the mechanical properties, differently heat treated samples of a Ni-Al-Ti modell alloy were investigated from the micrometer to the atomic scale. The single crystalline cast material was broadly characterized by means of light and scanning electron microscopy, the laue method (back-reflection), differential scanning calorimetry as well as electron probe microanalysis. Dendritic segregations were found, whereas the dendrite cores show an enrichment in nickel and aluminum and in turn the interdendritic regions show an enrichment in titanium. An adequate combination of temperature and time was determined on the basis of quantitative analyses after different homogenization treatments. The evolution of the hierarchical microstructure was investigated on the nanometer scale by means of transmission electron microscopy and on the atomic scale with atom probe tomography. The combined analyses reveal that Ni-rich clusters form within the γ{sup '} precipitates during the early stages of phase separation. These Ni-rich clusters coalesce and thereby form γ spheres which undergo a morphological change to plates accompanied by a chemical evolution. In the beginning the γ spheres are located well within the metastable γ + γ{sup '} two-phase region and later, after the morphological change, achieve the equilibrium composition of the γ phase. Furthermore the involved energies were considered in order to elucidate the driving forces for the phase separation of γ{sup '} precipitates. A correlation between the

  12. Compact modelling of InAlN/GaN HEMT for low noise applications

    International Nuclear Information System (INIS)

    Sakalas, P; Šimukovič, A; Matulionis, A; Piotrowicz, S; Jardel, O; Delage, S L; Mukherjee, A

    2014-01-01

    This paper presents results of high-frequency noise modelling of InAlN/GaN high electron mobility transistors (HEMTs) with different formulations of the minimum noise figure NF min . Current–voltage characteristics and s-parameters of 0.15 μm gate length and 2 × 75 μm gate width InAlN/GaN HEMTs were measured at room temperature in a wide frequency range (300 MHz to 50 GHz) and bias range (V GS from −4.8 to 1 V and V DS from 0 to 21 V). Both the EEHEMT1 and Angelov GaN compact models yielded excellent agreement for transfer and output characteristics, transconductance g m , and f T , f max. High-frequency noise parameters NF min , R n , Γ OPT of InAlN/GaN HEMT were measured in 8–50 GHz frequency band. Noise formulation within the EEHEMT1 model underestimates the measured NF min and R n . The well known three-parameter PRC noise model is in a better agreement with the measured data but neglects the shot noise resulting from the gate leakage. The inductive degenerated source matching method and EEHEMT1 were used to design a single stage LNA operated at 8 GHz frequency. A 10 dB gain with an input reflection of −12 dB with a 2.5 dB of noise factor were obtained at 8 GHz. (paper)

  13. Apoyo familiar en el apego al tratamiento de la hipertensión arterial esencial Family support and drug therapy compliance in essential hypertension

    Directory of Open Access Journals (Sweden)

    Florentina Marín-Reyes

    2001-08-01

    Full Text Available Objetivo. Determinar la asociación entre apoyo familiar (AF y apego al tratamiento de la hipertensión arterial esencial (HAS. Material y métodos. Estudio de casos y controles al que se integraron 80 sujetos con diagnóstico establecido de HAS, con 40 pacientes en cada grupo. Se consideró como casos a los pacientes con apego y como controles a los pacientes sin apego al tratamiento. El estudio se realizó de mayo a diciembre de 1999, en el Hospital Regional del IMSS, en la ciudad de Durango, Durango, México. La edad, género, duración de la HAS, escolaridad y estado civil fueron criterios de pareamiento. Las diferencias se establecieron con las pruebas ji cuadrada y t de student. Se calculó la razón de momios para estimar la fuerza de asociación. El diagnóstico de hipertensión arterial secundaria, o de otras enfermedades crónicas fueron criterios de exclusión. Resultados. No hubo diferencias entre los grupos respecto a las variables sociodemográficas, modalidad de tratamiento ni conocimiento que el enfermo tenía sobre su enfermedad. Tenían control de la presión arterial 31 (77.5% pacientes con apego y 11 (27.5% sin apego, p= 0.003. El AF se asoció de manera independiente con apego al tratamiento, RM 6.9, IC 95% 2.3-21.1. Conclusiones. El apego se vincula de forma significativa con el apoyo que los familiares otorgan al enfermo. El texto completo en inglés de este artículo está disponible en: http://www.insp.mx/salud/index.htmlObjective. To assess the relationship between family support and drug therapy compliance in essential hypertension. Material and methods. A case-control study was conducted between May and December 1999, at Mexican Institute of Social Security Regional Hospital in Durango, among 80 hypertensive subjects; 40 were cases and 40 controls. Cases were subjects who complied with drug therapy and controls were those who did not, matched by age, gender, schooling, hypertensive disease duration, and marital status

  14. Modeling the relationship between family home environment factors and parental health.

    Science.gov (United States)

    Didericksen, Katharine Wickel; Berge, Jerica M

    2015-06-01

    Understanding parental health is an important part of understanding family health. Previous research suggests that family meals, familial relationship satisfaction, and family physical activity may separately be related to physical health. The current study aims to combine these variables into a structural equation model to determine the collective relationship they have with adult health within a sample of parents (n = 1,435). Most parents were married, White, and highly educated. The relationship between family meals and parental health was significant (β = -.07, t = -2.29, p Familial relationship satisfaction and family physical activity were not found to be associated with parental health. Exploratory findings of the sample stratified by biological sex are described. Findings from the current study were consistent with a systemic perspective in that parents may have health benefits when they participate in family-level behavior (e.g., family meals). Additional areas for research and limitations to the current study are also discussed. (c) 2015 APA, all rights reserved).

  15. A Predictive Model of Domestic Violence in Multicultural Families Focusing on Perpetrator.

    Science.gov (United States)

    Choi, Eun Young; Hyun, Hye Jin

    2016-09-01

    This study was conducted to assess predictor variables of husbands in multicultural families and examine the relationship among variables after setting up a hypothetical model including influencing factors, so as to provide a framework necessary for developing nursing interventions of domestic violence. The participants were 260 husbands in multicultural families in four cities in Korea. Data were analyzed using SPSS 22.0 and AMOS 20.0. Self-control, social support, family of origin violence experience and stress on cultural adaptation directly affected to dysfunctional communication, and the explanatory power of the variables was 64.7%. Family of origin violence experience in domestic stress on cultural adaptation, and dysfunctional communication were directly related to domestic violence in multicultural families, and the explanatory power of the variables was 64.6%. We found out that all variables in the model had mediation effects to domestic violence through dysfunctional communication. In other words, self-control and social support had complete mediation effects, and family of origin violence experience in domestic violence and stress on cultural adaptation had partial mediation effects. The variables explained in this study should be considered as predictive factors of domestic violence in multicultural families, and used to provide preventive nursing intervention. Our resutls can be taken into account for developing and implementing programs on alleviating dysfunctional communication in multicultural families in Korea. Copyright © 2016. Published by Elsevier B.V.

  16. Modeling and optimization of a double-well double-barrier GaN/AlGaN/GaN/AlGaN resonant tunneling diode

    Science.gov (United States)

    Liu, Yang; Gao, Bo; Gong, Min; Shi, Ruiying

    2017-06-01

    The influence of a GaN layer as a sub-quantum well for an AlGaN/GaN/AlGaN double barrier resonant tunneling diode (RTD) on device performance has been investigated by means of numerical simulation. The introduction of the GaN layer as the sub-quantum well turns the dominant transport mechanism of RTD from the 3D-2D model to the 2D-2D model and increases the energy difference between tunneling energy levels. It can also lower the effective height of the emitter barrier. Consequently, the peak current and peak-to-valley current difference of RTD have been increased. The optimal GaN sub-quantum well parameters are found through analyzing the electrical performance, energy band, and transmission coefficient of RTD with different widths and depths of the GaN sub-quantum well. The most pronounced electrical parameters, a peak current density of 5800 KA/cm2, a peak-to-valley current difference of 1.466 A, and a peak-to-valley current ratio of 6.35, could be achieved by designing RTD with the active region structure of GaN/Al0.2Ga0.8 N/GaN/Al0.2Ga0.8 N (3 nm/1.5 nm/1.5 nm/1.5 nm).

  17. Attachment-based family therapy for depressed and suicidal adolescents: theory, clinical model and empirical support.

    Science.gov (United States)

    Ewing, E Stephanie Krauthamer; Diamond, Guy; Levy, Suzanne

    2015-01-01

    Attachment-Based Family Therapy (ABFT) is a manualized family-based intervention designed for working with depressed adolescents, including those at risk for suicide, and their families. It is an empirically informed and supported treatment. ABFT has its theoretical underpinnings in attachment theory and clinical roots in structural family therapy and emotion focused therapies. ABFT relies on a transactional model that aims to transform the quality of adolescent-parent attachment, as a means of providing the adolescent with a more secure relationship that can support them during challenging times generally, and the crises related to suicidal thinking and behavior, specifically. This article reviews: (1) the theoretical foundations of ABFT (attachment theory, models of emotional development); (2) the ABFT clinical model, including training and supervision factors; and (3) empirical support.

  18. Family nonuniversal Z' models with protected flavor-changing interactions

    Science.gov (United States)

    Celis, Alejandro; Fuentes-Martín, Javier; Jung, Martin; Serôdio, Hugo

    2015-07-01

    We define a new class of Z' models with neutral flavor-changing interactions at tree level in the down-quark sector. They are related in an exact way to elements of the quark mixing matrix due to an underlying flavored U(1)' gauge symmetry, rendering these models particularly predictive. The same symmetry implies lepton-flavor nonuniversal couplings, fully determined by the gauge structure of the model. Our models allow us to address presently observed deviations from the standard model and specific correlations among the new physics contributions to the Wilson coefficients C9,10' ℓ can be tested in b →s ℓ+ℓ- transitions. We furthermore predict lepton-universality violations in Z' decays, testable at the LHC.

  19. A gate current 1/f noise model for GaN/AlGaN HEMTs

    International Nuclear Information System (INIS)

    Liu Yu'an; Zhuang Yiqi

    2014-01-01

    This work presents a theoretical and experimental study on the gate current 1/f noise in AlGaN/GaN HEMTs. Based on the carrier number fluctuation in the two-dimensional electron gas channel of AlGaN/GaN HEMTs, a gate current 1/f noise model containing a trap-assisted tunneling current and a space charge limited current is built. The simulation results are in good agreement with the experiment. Experiments show that, if V g < V x (critical gate voltage of dielectric relaxation), gate current 1/f noise comes from the superimposition of trap-assisted tunneling RTS (random telegraph noise), while V g > V x , gate current 1/f noise comes from not only the trap-assisted tunneling RTS, but also the space charge limited current RTS. This indicates that the gate current 1/f noise of the GaN-based HEMTs device is sensitive to the interaction of defects and the piezoelectric relaxation. It provides a useful characterization tool for deeper information about the defects and their evolution in AlGaN/GaN HEMTs. (semiconductor devices)

  20. Method for widespread microRNA-155 inhibition prolongs survival in ALS-model mice

    Science.gov (United States)

    Koval, Erica D.; Shaner, Carey; Zhang, Peter; du Maine, Xavier; Fischer, Kimberlee; Tay, Jia; Chau, B. Nelson; Wu, Gregory F.; Miller, Timothy M.

    2013-01-01

    microRNAs (miRNAs) are dysregulated in a variety of disease states, suggesting that this newly discovered class of gene expression repressors may be viable therapeutic targets. A microarray of miRNA changes in ALS-model superoxide dismutase 1 (SOD1)G93A rodents identified 12 miRNAs as significantly changed. Six miRNAs tested in human ALS tissues were confirmed increased. Specifically, miR-155 was increased 5-fold in mice and 2-fold in human spinal cords. To test miRNA inhibition in the central nervous system (CNS) as a potential novel therapeutic, we developed oligonucleotide-based miRNA inhibitors (anti-miRs) that could inhibit miRNAs throughout the CNS and in the periphery. Anti-miR-155 caused global derepression of targets in peritoneal macrophages and, following intraventricular delivery, demonstrated widespread functional distribution in the brain and spinal cord. After treating SOD1G93A mice with anti-miR-155, we significantly extended survival by 10 days and disease duration by 15 days (38%) while a scrambled control anti-miR did not significantly improve survival or disease duration. Therefore, antisense oligonucleotides may be used to successfully inhibit miRNAs throughout the brain and spinal cord, and miR-155 is a promising new therapeutic target for human ALS. PMID:23740943

  1. Modeling the anomalous flow behavior of Ni3Al intermetallic single crystals

    International Nuclear Information System (INIS)

    Choi, Y.S.; Parthasarathy, T.A.; Dimiduk, D.M.; Uchic, M.D.

    2004-01-01

    In this study we present a new constitutive model for Ni3Al and Ni3(Al, X) alloys that was developed to represent many of the unusual plastic flow behavior found in L12 intermetallics while maintaining consistency with the experimentally-observed evolution of dislocation substructure. In particular, we sought to develop a model that would not only predict the anomalous increase of the yield strength with increasing temperature, but would also capture other important flow characteristics such as extremely high work-hardening rates that change anomalously with temperature, and a flow stress that is partially to fully reversible with temperature. For this model, we have treated work-hardening as arising from two different sources. Thermally-reversible work hardening is accounted for using the description of screw dislocation motion proposed by Caillard, which involves exhaustion of mobile dislocations by cross-slip locking of the dislocation core and athermal unlocking. Thermally-irreversible work hardening is accounted for using an approach consistent with the theoretical framework proposed by Ezz and Hirsch, which involves both the multiplication of Frank-Reed sources and the interaction of edge-dislocation segments with cross-slip locking events and the dislocation forest. Both work-hardening contributions were incorporated into the rate formulation for thermally-activated plastic flow proposed by Kocks, Argon and Ashby. We will show simulation results for the flow response of Ni3(Al, X) crystals over a wide range of temperatures in the anomalous flow regime, and we will compare these findings with experimental data

  2. Loss of metal ions, disulfide reduction and mutations related to familial ALS promote formation of amyloid-like aggregates from superoxide dismutase.

    Directory of Open Access Journals (Sweden)

    Zeynep A Oztug Durer

    Full Text Available Mutations in the gene encoding Cu-Zn superoxide dismutase (SOD1 are one of the causes of familial amyotrophic lateral sclerosis (FALS. Fibrillar inclusions containing SOD1 and SOD1 inclusions that bind the amyloid-specific dye thioflavin S have been found in neurons of transgenic mice expressing mutant SOD1. Therefore, the formation of amyloid fibrils from human SOD1 was investigated. When agitated at acidic pH in the presence of low concentrations of guanidine or acetonitrile, metalated SOD1 formed fibrillar material which bound both thioflavin T and Congo red and had circular dichroism and infrared spectra characteristic of amyloid. While metalated SOD1 did not form amyloid-like aggregates at neutral pH, either removing metals from SOD1 with its intramolecular disulfide bond intact or reducing the intramolecular disulfide bond of metalated SOD1 was sufficient to promote formation of these aggregates. SOD1 formed amyloid-like aggregates both with and without intermolecular disulfide bonds, depending on the incubation conditions, and a mutant SOD1 lacking free sulfhydryl groups (AS-SOD1 formed amyloid-like aggregates at neutral pH under reducing conditions. ALS mutations enhanced the ability of disulfide-reduced SOD1 to form amyloid-like aggregates, and apo-AS-SOD1 formed amyloid-like aggregates at pH 7 only when an ALS mutation was also present. These results indicate that some mutations related to ALS promote formation of amyloid-like aggregates by facilitating the loss of metals and/or by making the intramolecular disulfide bond more susceptible to reduction, thus allowing the conversion of SOD1 to a form that aggregates to form resembling amyloid. Furthermore, the occurrence of amyloid-like aggregates per se does not depend on forming intermolecular disulfide bonds, and multiple forms of such aggregates can be produced from SOD1.

  3. A dyadic model of the work-family interface: a study of dual-earner couples in China.

    Science.gov (United States)

    Ho, Man Yee; Chen, Xuefei; Cheung, Fanny M; Liu, Huimin; Worthington, Everett L

    2013-01-01

    This study adopted a spillover-crossover model to examine the roles of personality and perceived social support as antecedents of the work-family interface among dual-earner couples in China. Married couples (N = 306) from 2 major cities in China (Shanghai and Jinan) completed questionnaires measuring a relationship-oriented personality trait (i.e., family orientation), perceived family and work support, and work-family conflict and enhancement. The results showed that family orientation and perceived family support was positively associated with family-to-work enhancement and negatively associated with family-to-work conflict for both husbands and wives. Perceived work support was positively associated with family-to-work enhancement for wives and negatively associated with work-to-family conflict for husbands. Similarities in family orientation between partners were positively correlated with the individual's family-to-work enhancement. This study also illustrated the crossover of the work-family interface between dual-earner couples by using the actor-partner interdependence model. The pattern of associations between personality trait and perceived social support varied by gender. Husbands' family orientation was negatively correlated with work-to-family enhancement experienced by wives, and husbands' perceived work support was positively correlated with work-to-family enhancement experienced by wives. Wives' perceived work support was positively correlated with family-to-work conflict experienced by husbands.

  4. Investigation and modeling of Al3(Sc, Zr) precipitation strengthening in the presence of enhanced supersaturation and within Al-Cu binary alloys

    Science.gov (United States)

    Deane, Kyle

    Diffuse Al-Sc and Al-Zr alloys have been demonstrated in literature to be relatively coarsening resistant at higher temperatures when compared with commonly used precipitation strengthening alloys (e.g. 2000 series, 6000 series). However, because of a limited strengthening due to the low solubility of scandium and zirconium in aluminum, and owing to the scarcity and therefore sizeable price tag attached to scandium, little research has been done in the way of optimizing these alloys for commercial applications. With this in mind, this dissertation describes research which aims to tackle several important areas of Al-Sc-Zr research that have been yet unresolved. In Chapter 4, rapid solidification was utilized to enhance the achievable supersaturation of the alloy in an effort to increase the achievable precipitate strengthening. In Chapter 5, Additive Friction Stir processing (AFS), a novel method of mechanically combining materials without melting, was employed in an attempt to pass the benefits of supersaturation from melt spun ribbon into a more structurally useful bulk material. In Chapter 6, a Matlab program written to predict precipitate nucleation, growth, and coarsening with a modified Kampmann and Wagner Numerical (KWN) model, was used to predict heat treatment regimens for more efficient strengthening. Those predictions were then tested experimentally to test the validity of the results. And lastly, in Chapter 7, the effect of zirconium on Al-Cu secondary precipitates was studied in an attempt to increase their thermal stability, as much higher phase fractions of Al-Cu precipitates are achievable than Al-Zr precipitates.

  5. Diffusion model analyses of the experimental data of 12C+27Al, 40Ca dissipative collisions

    International Nuclear Information System (INIS)

    SHEN Wen-qing; QIAO Wei-min; ZHU Yong-tai; ZHAN Wen-long

    1985-01-01

    Assuming that the intermediate system decays with a statistical lifetime, the general behavior of the threefold differential cross section d 3 tau/dZdEdtheta in the dissipative collisions of 68 MeV 12 C+ 27 Al and 68.6 MeV 12 C+ 40 Ca system is analyzed in the diffusion model framework. The lifetime of the intermediate system and the separation distance for the completely damped deep-inelastic component are obtained. The calculated results and the experimental data of the angular distributions and Wilczynski plots are compared. The probable reasons for the differences between them are briefly discussed

  6. Impact Testing of Aluminum 2024 and Titanium 6Al-4V for Material Model Development

    Science.gov (United States)

    Pereira, J. Michael; Revilock, Duane M.; Lerch, Bradley A.; Ruggeri, Charles R.

    2013-01-01

    One of the difficulties with developing and verifying accurate impact models is that parameters such as high strain rate material properties, failure modes, static properties, and impact test measurements are often obtained from a variety of different sources using different materials, with little control over consistency among the different sources. In addition there is often a lack of quantitative measurements in impact tests to which the models can be compared. To alleviate some of these problems, a project is underway to develop a consistent set of material property, impact test data and failure analysis for a variety of aircraft materials that can be used to develop improved impact failure and deformation models. This project is jointly funded by the NASA Glenn Research Center and the FAA William J. Hughes Technical Center. Unique features of this set of data are that all material property data and impact test data are obtained using identical material, the test methods and procedures are extensively documented and all of the raw data is available. Four parallel efforts are currently underway: Measurement of material deformation and failure response over a wide range of strain rates and temperatures and failure analysis of material property specimens and impact test articles conducted by The Ohio State University; development of improved numerical modeling techniques for deformation and failure conducted by The George Washington University; impact testing of flat panels and substructures conducted by NASA Glenn Research Center. This report describes impact testing which has been done on aluminum (Al) 2024 and titanium (Ti) 6Al-4vanadium (V) sheet and plate samples of different thicknesses and with different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade. Data from this testing will be used in validating material models developed under this program. The material

  7. Using professional expertise in partnership with families: A new model of capacity building.

    Science.gov (United States)

    Clerke, Teena; Hopwood, Nick; Chavasse, Fran; Fowler, Cathrine; Lee, Sally; Rogers, Julie

    2017-03-01

    The first five years of parenting are critical to children's development. Parents are known to respond best to interventions with a partnership-based approach, yet child and family health nurses (CFHNs) report some tension between employing their expertise and maintaining a partnership relationship. This article identifies ways in which CFHNs skilfully use their professional expertise, underpinned by helping qualities and interpersonal skills, to assist families build confidence and capacity, and thus buffer against threats to parent and child well-being. It reports on an Australian ethnographic study of services for families with young children. Fifty-two interactions were observed between CFHNs and families in day-stay and home visiting services in Sydney. A new model is presented, based on four partnership activities and the fluid movement between them, to show how CFHNs use their expertise to identify strengths and foster resilience in families in the longer term, without undermining the principles of partnership.

  8. OBIECTUL JURIDIC GENERIC ȘI OBIECTUL JURIDIC SPECIAL AL VIOLENȚEI ÎN FAMILIE (art.2011 CP RM

    Directory of Open Access Journals (Sweden)

    Nicolae CORCEA

    2017-07-01

    Full Text Available Acest articol este consacrat unor probleme juridico-penale, cum ar fi definitivarea și analiza aprofundată a obiectului juridic generic, precum și a obiectului juridic special al faptei infracționale de violență în familie prevăzute la art.2011 CP RM. Ținând cont de modificările recente conceptuale la care a fost supus cadrul incriminator al violenţei în familie, autorii au intervenit cu interpretări noi ale unor categorii juridice care necesită a fi analizate. Cercetarea a fost efectuată în baza propriilor date empirice obținute din analiza practicii judiciare în materie, precum și băzându-se pe cele mai recente surse doctrniare atât din domeniul dreptului penal, cât și din domeniul altor științe (criminologie, psihologie, sociologie, pedagogie. În urma studiului întreprins au fost formulate concluzii și interpretări apte de a fi utilizate în știința dreptului penal, precum și în practica de aplicare a normei juridico-penale privind violența în familie (art.2011 CP RM.The generic legal object and the special legal object of the domestic violence (art.2011 CC RMThis scientific article is dedicated to some problems of penal origin as defining and profound analysis of the generic legal object as well as special legal object of the criminal offence of domestic violence provided by the article 2011 of the Criminal code of the Republic of Moldova. Taking into account the recent conceptual modifications introduced inside the article of domestic violence, the authors have performed several new interpretations of some legal categories which ought to be analyzed. The scientific research has been effectuated on the base of the proper and authentic empirical data obtained from the analysis of the judicial practice in the matter of domestic violence, as well as being based on the most recent scientific issues in the field of the Substantive Criminal Law and other branches of science (criminology, psychology, sociology

  9. Lattice stability of metastable AlN and wurtzite-to-rock-salt structural transformation by CALPHAD modeling

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yanhui, E-mail: yanhui.z@hotmail.com [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials-Applied Materials Physics (IAM-AWP), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); High-performance Ceramics Division, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang (China); Franke, Peter; Li, Dajian; Seifert, Hans Jürgen [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials-Applied Materials Physics (IAM-AWP), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2016-12-01

    Reliable lattice stability of cubic AlN with rock-salt structure (rs-AlN) is the prerequisite of accurate thermodynamic modeling of cubic (M, Al)N solid solutions (M = Ti, Zr, Cr etc.). In order to derive the Gibbs energy of metastable rs-AlN, and then its lattice stability, we did the pressure-temperature (P-T) assessment of AlN phases by equations-of-state modeling. Meanwhile, the molar volumes and the heat capacities of wurtzite and rock-salt AlN, as well as the wurtzite-to-rock-salt structural transition at high P&T were successfully incorporated in CALPHAD-type database by integrating thermodynamic data from experiments and ab-initio calculations. These results promise subsequent investigations on phase stabilities and transitions of solid solutions with AlN component and the development of novel multicomponent coatings. - Highlights: • Phase stability investigation for novel multi-component metastable coatings. • Structural transition at high temperature and high pressure. • Integrating thermodynamic data from ab-initio calculations and experiments. • Thermal expansion, isothermal compressibility and heat capacity of w-AlN and rs-AlN.

  10. Testing one model of family role in the development of formal operations

    Directory of Open Access Journals (Sweden)

    Stepanović Ivana

    2008-01-01

    Full Text Available Contemporary authors emphasise the importance of viewing the family as a specific educational context and of studying its role in the cognitive development. In this paper, we tested the model that postulates the way in which the different ways of parental mediation and various means of the family cultural-supportive system affect the development of formal operations. We assumed that the education of parents and financial status of the family form a wider context that influences the general dimensions of family interaction (emotional exchange and democratism, but also the cultural-pedagogical status of the family, and that their connection with formal operations is mediated by the above-mentioned variables. We expected the education of parents and general dimensions of family interaction to influence the parental mediation characteristic for the development of formal operations, operationalised by CSS scale, and to mediate, via this variable, the development of that form of thinking. The direct link with formal operations is postulated in the case of variables of cultural-pedagogical status and CSS scale. The sample consists of 305 pupils aged 15 to 19. The Structural Equation Modeling was used for testing the postulated model. The results show that there is a direct influence of cultural-pedagogical status and CSS scale on formal operations, but of mother's education as well. Some relations between other predictors were confirmed, and some not, which suggests that the proposed explanatory model must be revised to some degree.

  11. Family Businesses Transitioning to a Circular Economy Model: The Case of “Mercadona”

    Directory of Open Access Journals (Sweden)

    Pedro Núñez-Cacho

    2018-02-01

    Full Text Available Sustainability addresses environmental and social issues affecting this and future generations. When family businesses perceive that the community is disrupted, recognize an environmental problem and respond by implementing new environmental policies or regulations, the family business’s socio-emotional values press to transition to a more sustainable production system, such as the ‘Circular Economy.’ Drawing on the Dubin (1978 methodology—a paradigm for building models through deduction—we design a sustainable model, which shows family businesses’ responses to changes in the environment. It explains the reasons why family firms transition to the Circular Economy, based on the theory of Socio-Emotional Wealth (SEW. We check the model through the case study of the food retail leader in the Spanish market—Mercadona—which applies policies about energy, resources and waste to become a Circular Economy business model. Because of the strong family character of Mercadona, this case can be useful for the decision-making of other family businesses.

  12. Daily spillover from family to work: A test of the work-home resources model.

    Science.gov (United States)

    Du, Danyang; Derks, Daantje; Bakker, Arnold B

    2018-04-01

    The present study examines a mediated moderation model of the day-level effects of family hassles and family-work spillover (affect and cognition) on the relationship between job resources and employees' flourishing at work. Based on the work-home resources model, the authors hypothesized that demands from one domain (family) induce repetitive thoughts or negative feelings about those problems, so that individuals are not able to function optimally and to make full use of contextual resources in the other domain (work). Multilevel analyses of 108 Chinese working parents' 366 daily surveys revealed that the relationship between morning job resources and afternoon flourishing was significantly positive when previous day family hassles were low; the relationship became nonsignificant when previous day family hassles were high. In addition, as predicted, daily rumination also attenuated the relationship between morning job resources and afternoon flourishing, whereas daily affect did not. Finally, the moderating effect of previous day family hassles was mediated by daily rumination. The findings contribute to spillover theories by revealing the roles of affective and cognitive spillover from family to work. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  13. Optimal parallel algorithms for problems modeled by a family of intervals

    Science.gov (United States)

    Olariu, Stephan; Schwing, James L.; Zhang, Jingyuan

    1992-01-01

    A family of intervals on the real line provides a natural model for a vast number of scheduling and VLSI problems. Recently, a number of parallel algorithms to solve a variety of practical problems on such a family of intervals have been proposed in the literature. Computational tools are developed, and it is shown how they can be used for the purpose of devising cost-optimal parallel algorithms for a number of interval-related problems including finding a largest subset of pairwise nonoverlapping intervals, a minimum dominating subset of intervals, along with algorithms to compute the shortest path between a pair of intervals and, based on the shortest path, a parallel algorithm to find the center of the family of intervals. More precisely, with an arbitrary family of n intervals as input, all algorithms run in O(log n) time using O(n) processors in the EREW-PRAM model of computation.

  14. On sensitivity of gamma families to the model of nuclear interaction

    International Nuclear Information System (INIS)

    Krys, A.; Tomaszewski, A.; Wrotniak, J.A.

    1980-01-01

    A variety of 5 different models of nuclear interaction has been used in a Monte Carlo simulation of nuclear and electromagnetic showers in the atmosphere. The gamma families obtained from this simulation were processed in a way, analogous to one employed in analysis of Pamir experimental results. The sensitivity of observed pattern to the nuclear interaction model assumptions was investigated. Such sensitivity, though not a strong one, was found. In case of longitudinal (or energetical) family characteristics, the changes in nuclear interaction should be really large, if they were to be reflected in the experimental data -with all methodical error possibilities. The transverse characteristics of gamma families are more sensitive to the assumed transverse momentum distribution, but they feel the longitudinal features of nuclear interaction as well. Additionally, there was tested the dependence of observed family pattern on some methodical effects (resolving power of X-ray film, radial cut-off and energy underestimation.) (author)

  15. Work-family conflict and alcohol use: examination of a moderated mediation model.

    Science.gov (United States)

    Wolff, Jennifer M; Rospenda, Kathleen M; Richman, Judith A; Liu, Li; Milner, Lauren A

    2013-01-01

    Research consistently documents the negative effects of work-family conflict; however, little research focuses on alcohol use. This study embraces a tension reduction theory of drinking, wherein alcohol use is thought to reduce the negative effects of stress. The purpose of the study was to test a moderated mediation model of the relationship between work-family conflict and alcohol use in a Chicagoland community sample of 998 caregivers. Structural equation models showed that distress mediated the relationship between work-family conflict and alcohol use. Furthermore, tension reduction expectancies of alcohol exacerbated the relationship between distress and alcohol use. The results advance the study of work-family conflict and alcohol use, helping explain this complicated relationship using sophisticated statistical techniques. Implications for theory and practice are discussed.

  16. Galilean generalized Robertson-Walker spacetimes: A new family of Galilean geometrical models

    Science.gov (United States)

    de la Fuente, Daniel; Rubio, Rafael M.

    2018-02-01

    We introduce a new family of Galilean spacetimes, the Galilean generalized Robertson-Walker spacetimes. This new family is relevant in the context of a generalized Newton-Cartan theory. We study its geometrical structure and analyse the completeness of its inextensible free falling observers. This sort of spacetimes constitutes the local geometric model of a much wider family of spacetimes admitting certain conformal symmetry. Moreover, we find some sufficient geometric conditions which guarantee a global splitting of a Galilean spacetime as a Galilean generalized Robertson-Walker spacetime.

  17. Effect of deformation on structure and reaction of Al isotopes using relativistic mean field densities in Glauber model

    Science.gov (United States)

    Panda, R. N.; Sharma, Mahesh K.; Panigrahi, M.; Patra, S. K.

    2018-06-01

    We have examined the ground state properties of Al isotopes towards the proton rich side from A = 22 to 28 using the well known relativistic mean field (RMF) formalism with NLSH parameter set. The calculated results are compared with the predictions of finite range droplet model and experimental data. The calculation is extended to estimate the reaction cross section for ^{22-28}Al as projectiles with ^{12}C as target. The incident energy of the projectiles are taken as 950 MeV/nucleon, for both spherical and deformed RMF densities as inputs in the Glauber model approximation. Further investigation of enhanced values of total reaction cross section for ^{23}Al and ^{24}Al in comparison to rest of the isotopes indicates the proton skin structure of these isotopes. Specifically, the large value of root mean square radius and total reaction cross section of ^{23}Al could not be ruled out the formation of proton halo.

  18. International Family Migration and the Dual-Earner Model

    DEFF Research Database (Denmark)

    Munk, Martin D.; Nikolka, Till; Poutvaara, Panu

    2018-01-01

    Gender differences in labor force participation are exceptionally small in Nordic countries. We investigate how couples emigrating from Denmark self-select and sort into different destinations and whether couples pursue the dual-earner model, in which both partners work, when abroad. Female labor...

  19. The birth of a collaborative model: obstetricians, midwives, and family physicians.

    Science.gov (United States)

    Pecci, Christine Chang; Mottl-Santiago, Julie; Culpepper, Larry; Heffner, Linda; McMahan, Therese; Lee-Parritz, Aviva

    2012-09-01

    In the United States, the challenges of maternity care include provider workforce, cost containment, and equal access to quality care. This article describes a collaborative model of care involving midwives, family physicians, and obstetricians at the Boston Medical Center, which serves a low-income multicultural population. Leadership investment in a collaborative model of care from the Department of Obstetrics and Gynecology, Section of Midwifery, and the Department of Family Medicine created a culture of safety and commitment to patient-centered care. Essential elements of the authors' successful model include a commitment to excellence in patient care, communication, and interdisciplinary education. Copyright © 2012 Elsevier Inc. All rights reserved.

  20. A Test of the Family Stress Model on Toddler-Aged Children's Adjustment among Hurricane Katrina Impacted and Nonimpacted Low-Income Families

    Science.gov (United States)

    Scaramella, Laura V.; Sohr-Preston, Sara L.; Callahan, Kristin L.; Mirabile, Scott P.

    2008-01-01

    Hurricane Katrina dramatically altered the level of social and environmental stressors for the residents of the New Orleans area. The Family Stress Model describes a process whereby felt financial strain undermines parents' mental health, the quality of family relationships, and child adjustment. Our study considered the extent to which the Family…

  1. The relationship of family characteristics and bipolar disorder using causal-pie models.

    Science.gov (United States)

    Chen, Y-C; Kao, C-F; Lu, M-K; Yang, Y-K; Liao, S-C; Jang, F-L; Chen, W J; Lu, R-B; Kuo, P-H

    2014-01-01

    Many family characteristics were reported to increase the risk of bipolar disorder (BPD). The development of BPD may be mediated through different pathways, involving diverse risk factor profiles. We evaluated the associations of family characteristics to build influential causal-pie models to estimate their contributions on the risk of developing BPD at the population level. We recruited 329 clinically diagnosed BPD patients and 202 healthy controls to collect information in parental psychopathology, parent-child relationship, and conflict within family. Other than logistic regression models, we applied causal-pie models to identify pathways involved with different family factors for BPD. The risk of BPD was significantly increased with parental depression, neurosis, anxiety, paternal substance use problems, and poor relationship with parents. Having a depressed mother further predicted early onset of BPD. Additionally, a greater risk for BPD was observed with higher numbers of paternal/maternal psychopathologies. Three significant risk profiles were identified for BPD, including paternal substance use problems (73.0%), maternal depression (17.6%), and through poor relationship with parents and conflict within the family (6.3%). Our findings demonstrate that different aspects of family characteristics elicit negative impacts on bipolar illness, which can be utilized to target specific factors to design and employ efficient intervention programs. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  2. Testing the family replication-model through Bsup(O)-Bsup(-O) mixing

    International Nuclear Information System (INIS)

    Datta, A.; Pati, J.C.

    1985-07-01

    It is observed that the family-replication idea, proposed in the context of a minimal preon-model, necessarily implies a maximal mixing (i.e. ΔM>>GAMMA) either in the Bsub(s)sup(O)-B-barsub(s)sup(O) or the Bsub(d)sup(O)-B-barsub(d)sup(O) system, in contrast to the standard model. (author)

  3. Review of family relational stress and pediatric asthma: the value of biopsychosocial systemic models.

    Science.gov (United States)

    Wood, Beatrice L; Miller, Bruce D; Lehman, Heather K

    2015-06-01

    Asthma is the most common chronic disease in children. Despite dramatic advances in pharmacological treatments, asthma remains a leading public health problem, especially in socially disadvantaged minority populations. Some experts believe that this health gap is due to the failure to address the impact of stress on the disease. Asthma is a complex disease that is influenced by multilevel factors, but the nature of these factors and their interrelations are not well understood. This paper aims to integrate social, psychological, and biological literatures on relations between family/parental stress and pediatric asthma, and to illustrate the utility of multilevel systemic models for guiding treatment and stimulating future research. We used electronic database searches and conducted an integrated analysis of selected epidemiological, longitudinal, and empirical studies. Evidence is substantial for the effects of family/parental stress on asthma mediated by both disease management and psychobiological stress pathways. However, integrative models containing specific pathways are scarce. We present two multilevel models, with supporting data, as potential prototypes for other such models. We conclude that these multilevel systems models may be of substantial heuristic value in organizing investigations of, and clinical approaches to, the complex social-biological aspects of family stress in pediatric asthma. However, additional systemic models are needed, and the models presented herein could serve as prototypes for model development. © 2015 Family Process Institute.

  4. Longitudinal and Integrative Tests of Family Stress Model Effects on Mexican Origin Adolescents

    Science.gov (United States)

    White, Rebecca M. B.; Liu, Yu; Nair, Rajni L.; Tein, Jenn-Yun

    2015-01-01

    The family stress model represents a common framework through which to examine the effects of environmental stressors on adolescent adjustment. The model suggests that economic and neighborhood stressors influence youth adjustment via disruptions to parenting. Incorporating integrative developmental theory, we examined the degree to which parents'…

  5. The Baby TALK Model: An Innovative Approach to Identifying High-Risk Children and Families

    Science.gov (United States)

    Villalpando, Aimee Hilado; Leow, Christine; Hornstein, John

    2012-01-01

    This research report examines the Baby TALK model, an innovative early childhood intervention approach used to identify, recruit, and serve young children who are at-risk for developmental delays, mental health needs, and/or school failure, and their families. The report begins with a description of the model. This description is followed by an…

  6. Structural Model for Antisocial Behavior: Generalization to Single-Mother Families.

    Science.gov (United States)

    Baldwin, David V.; Skinner, Martie L.

    1989-01-01

    The purpose of this study was to replicate the "basic training" structural model in Patterson's (1982) coercion theory, extending its scope to single-mother families with younger (six- to eight-year-old) boys. Significance of the successful replication was seen to lie in implications for the generalizability of the model across family…

  7. Variability-Specific Abstraction Refinement for Family-Based Model Checking

    DEFF Research Database (Denmark)

    Dimovski, Aleksandar; Wasowski, Andrzej

    2017-01-01

    and property, while the number of possible scenarios is very large. In this work, we present an automatic iterative abstraction refinement procedure for family-based model checking. We use Craig interpolation to refine abstract variational models based on the obtained spurious counterexamples (traces...

  8. The Impact of Role Modeling on Proteges' Personal Learning and Work-to-Family Enrichment

    Science.gov (United States)

    Kwan, Ho Kwong; Mao, Yina; Zhang, Haina

    2010-01-01

    The present study investigates the impact of role modeling as perceived by proteges on their personal learning (i.e., relational job learning and personal skill development) and work-to-family enrichment (WFE). Results from a two-wave field survey of 173 proteges in the People's Republic of China indicate that role modeling positively affects…

  9. Family process and youth internalizing problems: A triadic model of etiology and intervention.

    Science.gov (United States)

    Schleider, Jessica L; Weisz, John R

    2017-02-01

    Despite major advances in the development of interventions for youth anxiety and depression, approximately 30% of youths with anxiety do not respond to cognitive behavioral treatment, and youth depression treatments yield modest symptom decreases overall. Identifying networks of modifiable risk and maintenance factors that contribute to both youth anxiety and depression (i.e., internalizing problems) may enhance and broaden treatment benefits by informing the development of mechanism-targeted interventions. A particularly powerful network is the rich array of family processes linked to internalizing problems (e.g., parenting styles, parental mental health problems, and sibling relationships). Here, we propose a new theoretical model, the triadic model of family process, to organize theory and evidence around modifiable, transdiagnostic family factors that may contribute to youth internalizing problems. We describe the model's implications for intervention, and we propose strategies for testing the model in future research. The model provides a framework for studying associations among family processes, their relation to youth internalizing problems, and family-based strategies for strengthening prevention and treatment.

  10. The Gd-Co-Al system at 870/1070 K as a representative of the rare earth-Co-Al family and new rare-earth cobalt aluminides: Crystal structure and magnetic properties

    Science.gov (United States)

    Morozkin, A. V.; Garshev, A. V.; Knotko, A. V.; Yapaskurt, V. O.; Mozharivskyj, Y.; Yuan, Fang; Yao, Jinlei; Nirmala, R.; Quezado, S.; Malik, S. K.

    2018-05-01

    The Gd-Co-Al system has been investigated at 870/1070 K by X-ray and elemental EDS analyses. The existence of the known compounds Gd2Co3Al9 (Y2Co3Ga9-type), Gd3Co4.5Al11.5 (Gd3Co4.6Al11) (Gd3Ru4Al12-type), Gd3Co6-7.4Al3-1.6 (CeNi3-type), GdCo1.15-0.65Al0.85-1.35 (MgZn2-type), Gd2Co2Al (Mo2NiB2-type) and Gd3Co3.5-3.25Al0.5-0.75 (W3CoB3-type) has been confirmed at 870/1070 K. Structure types have been determined for Gd2Co6Al19 (U2Co6Al19-type), Gd7Co6Al7 (Pr7Co6Al7-type), Gd6Co2-2.21Al1-0.79 (Ho6Co2Ga-type) and Gd14Co3.2Al2.8 (Gd14Co2.58Al3.42 at 970 K) (Lu14Co3In3-type). The structures of Gd6Co2Al, Gd6Co2.21Al0.79 and Gd14Co2.58Al3.42 flux-grown at 970 K have been refined from the single crystal X-ray diffraction data. Additionally, new ternary compounds Gd2Co5.7-5.3Al1.3-1.7 (Er2Co7-type) and Gd58Co20Al22 (unknown type structure) have been identified. Quasi-binary solid solutions were detected for Gd2Co17, GdCo5, Gd2Co7, GdCo3, GdCo2 and GdAl2 at 870/1070 K, while no appreciable solubility was observed for the other binary compounds in the Gd-Co-Al system. Magnetic properties of the Gd2Co3Al9, Gd3Co4.6Al11, Gd7Co6Al7, Gd6Co2.2Al0.8 and Gd14Co2.58Al3.42 compounds have been studied and are presented in this work. Gd6Co2.2Al0.8, Gd3Co4.6Al11, Gd7Co6Al7 and Gd14Co2.58Al3.42 order ferromagnetically, while Gd2Co3Al9 displays antiferromagnetic transition. Additionally, {Y, Sm, Tb - Tm}2Co6Al19 (U2Co6Al19-type), Yb2Co3Al9 (Y2Co3Ga9-type), {Y, Sm, Tm, Yb}3Co4.6Al11 (Gd3Ru4Al12-type) and Tb7Co6Al7 (Pr7Co6Al7-type) compounds have been synthesized and investigated.

  11. Exploring the influence of constitutive models and associated parameters for the orthogonal machining of Ti6Al4V

    Science.gov (United States)

    Pervaiz, S.; Anwar, S.; Kannan, S.; Almarfadi, A.

    2018-04-01

    Ti6Al4V is known as difficult-to-cut material due to its inherent properties such as high hot hardness, low thermal conductivity and high chemical reactivity. Though, Ti6Al4V is utilized by industrial sectors such as aeronautics, energy generation, petrochemical and bio-medical etc. For the metal cutting community, competent and cost-effective machining of Ti6Al4V is a challenging task. To optimize cost and machining performance for the machining of Ti6Al4V, finite element based cutting simulation can be a very useful tool. The aim of this paper is to develop a finite element machining model for the simulation of Ti6Al4V machining process. The study incorporates material constitutive models namely Power Law (PL) and Johnson – Cook (JC) material models to mimic the mechanical behaviour of Ti6Al4V. The study investigates cutting temperatures, cutting forces, stresses, and plastic strains with respect to different PL and JC material models with associated parameters. In addition, the numerical study also integrates different cutting tool rake angles in the machining simulations. The simulated results will be beneficial to draw conclusions for improving the overall machining performance of Ti6Al4V.

  12. ADAPTIF CONSERVATION (ACM MODEL IN INCREASING FAMILY SUPPORT AND COMPLIANCE TREATMENT IN PATIENT WITH PULONARY TUBERCULOSIS IN SURABAYA CITY REGION

    Directory of Open Access Journals (Sweden)

    Siti Nur Kholifah

    2017-04-01

    Full Text Available Introduction: Tuberculosis (TB in Indonesia is still health problem and the prevalence rate is high. Discontinuing medication and lack of family support are the causalities. Numbers of strategies to overcome are seemingly not succeeded. Roles and responsibilities of family nursing are crucial to improve participation, motivation of individual, family and community in prevention, including pulmonary tuberculosis. Unfortunately, models of pulmonary tuberculosis currently unavailable. The combination of adaptation and conservation in complementarily improving family support and compliance in medication is introduced in this study. Method: This research intended to analyze Adaptive Conservation Model (ACM in extending family support and treatment compliance. Modeling steps including model analysis, expert validation, field trial, implementation and recommending the output model. Research subject involves 15 families who implement family Assistance and supervision in Medication (ASM and other 15 families with ACM. Result: The study revealed ACM is better than ASM on the case of family support and medication compliances. It supports the role of environment as influential factor on individual health belief, values and decision making. Therefore, it is advised to apply ACM in enhancing family support and compliance of pulmonary TB patients. Discussion: Social and family supports to ACM group obtained by developing interaction through communication. Family interaction necessary to improve family support to pulmonary tuberculosis patients. And social support plays as motivator to maintain compliance on medication

  13. Synaptic conditions for auto-associative memory storage and pattern completion in Jensen et al.'s model of hippocampal area CA3.

    Science.gov (United States)

    Cheu, Eng Yeow; Yu, Jiali; Tan, Chin Hiong; Tang, Huajin

    2012-12-01

    Jensen et al. (Learn Memory 3(2-3):243-256, 1996b) proposed an auto-associative memory model using an integrated short-term memory (STM) and long-term memory (LTM) spiking neural network. Their model requires that distinct pyramidal cells encoding different STM patterns are fired in different high-frequency gamma subcycles within each low-frequency theta oscillation. Auto-associative LTM is formed by modifying the recurrent synaptic efficacy between pyramidal cells. In order to store auto-associative LTM correctly, the recurrent synaptic efficacy must be bounded. The synaptic efficacy must be upper bounded to prevent re-firing of pyramidal cells in subsequent gamma subcycles. If cells encoding one memory item were to re-fire synchronously with other cells encoding another item in subsequent gamma subcycle, LTM stored via modifiable recurrent synapses would be corrupted. The synaptic efficacy must also be lower bounded so that memory pattern completion can be performed correctly. This paper uses the original model by Jensen et al. as the basis to illustrate the following points. Firstly, the importance of coordinated long-term memory (LTM) synaptic modification. Secondly, the use of a generic mathematical formulation (spiking response model) that can theoretically extend the results to other spiking network utilizing threshold-fire spiking neuron model. Thirdly, the interaction of long-term and short-term memory networks that possibly explains the asymmetric distribution of spike density in theta cycle through the merger of STM patterns with interaction of LTM network.

  14. Modelos clínico e psicossocial de atenção ao indivíduo e à família na assistência domiciliar: bases conceituais Modelos clínico y psicosocial de atención al individuo y la familia en la asistencia domiciliaria: bases conceptuales Clinical and psychosocial models of attention to the individual and the family in home care: conceptual frameworks

    Directory of Open Access Journals (Sweden)

    Vilanice Alves de Araújo Püschel

    2006-06-01

    Full Text Available Prestar assistência no domicílio tem sido uma prática em expansão no Brasil. No entanto, o modelo de assistência tem se baseado no modelo clínico e hospitalar. Este artigo tem como objetivo propor referenciais teóricos para um modelo de atenção voltado à assistência domiciliar, considerando a dimensão psicossocial. São apresentadas, didaticamente separadas, as bases conceituais dos modelos clínico e psicossocial, apesar de serem indissociáveis, de modo a contribuir para o aprimoramento de uma prática que seja capaz de agregar expressões da pessoa e do contexto enquanto elementos de uma dinâmica psicossocial.Prestar asistencia en el domicilio ha sido una práctica en expansión en el Brasil. No obstante, el modelo de asistencia se ha basado en el modelo clínico y hospitalario. Este artículo tiene como objetivo proponer referenciales teóricos para un modelo de atención volcada a la asistencia domiciliaria, considerando la dimensión psicosocial. Se presentan las bases conceptuales del modelo clínico y psicosocial, didácticamente separados, a pesar de no ser disociables, como una contribución al perfeccionamiento de una práctica capaz de agregar expresiones de la persona y del contexto en cuanto elemento de una dinámica psicosocial.Home care is a rapidly expanding segment in Brazil. The model currently applied to home care is based on clinical and hospital models. The objective of this article is to propose theoretical frameworks that can be applied to home care by taking into account its psychosocial dimension. Although indivisible, the conceptual frameworks of the clinical and the psychosocial models are broken down, for clarity purposes, in order to contribute to the improvement of practices, so as to add personal expressions and contexts as elements of psychosocial dynamics.

  15. Forecasting Models for Some Water Quality Parameters of Shatt Al-Hilla River, Iraq

    Directory of Open Access Journals (Sweden)

    Rafa H. Al-Suhili

    2017-07-01

    Full Text Available This paper provides Artificial Neural Networks model versions for forecasting the monthly averages of some chemical water quality parameters of Shatt Al-Hilla River, which is located at Hilla City, south of Iraq. The water quality parameters investigated were Sulphate, Magnesium, Calcium, Alkalinity, and Total Hardness. Results indicate that for Sulphate and Calcium high correlation coefficients models were observed to be (0.9 and 0.88, while for Magnesium, Alkalinity and Hardness low correlation coefficients model were observed to be (0.48,0.58, and 0.51 respectively. Serial correlation behavior of these variables indicate at that high lag time correlations sequences are observed for the first two variables and low ones for the last three water quality parameters. A serial correlation coefficient analysis was done and indicates that as the variable exhibited weak lag correlation structure, then a successful ANN forecasting model could not be obtained even if many trials were done to enhance it's performance, such as increasing the number of nodes, the lagged input variables, and/or changing the learning rate and the momentum term values, or the use of different types of activation functions. On the other hand, those variables that have a strong lag correlation structure can easily fit successful ANN forecasting models

  16. Modelling the fathering role: Experience in the family of origin and father involvement

    Directory of Open Access Journals (Sweden)

    Mihić Ivana

    2012-01-01

    Full Text Available The study presented in this paper deals with the effects of experiences with father in the family of origin on the fathering role in the family of procreation. The results of the studies so far point to great importance of such experiences in parental role modelling, while recent approaches have suggested the concept of introjected notion or an internal working model of the fathering role as the way to operationalise the transgenerational transfer. The study included 247 two-parent couple families whose oldest child attended preschool education. Fathers provided information on self-assessed involvement via the Inventory of father involvement, while both fathers and mothers gave information on introjected experiences from the family of origin via the inventory Presence of the father in the family of origin. It was shown that father’s experiences from the family of origin had significant direct effects on his involvement in child-care. Very important experiences were those of negative emotional exchange, physical closeness and availability of the father, as well as beliefs about the importance of the father as a parent. Although maternal experiences from the family of origin did not contribute significantly to father involvement, shared beliefs about father’s importance as a parent in the parenting alliance had an effect on greater involvement in child-care. The data provide confirmation of the hypotheses on modelling of the fathering role, but also open the issue of the factor of intergenerational maintenance of traditional forms of father involvement in families in Serbia.

  17. Effect of fluoxetine on disease progression in a mouse model of ALS

    Science.gov (United States)

    Koschnitzky, J. E.; Quinlan, K. A.; Lukas, T. J.; Kajtaz, E.; Kocevar, E. J.; Mayers, W. F.; Siddique, T.

    2014-01-01

    Selective serotonin reuptake inhibitors (SSRIs) and other antidepressants are often prescribed to amyotrophic lateral sclerosis (ALS) patients; however, the impact of these prescriptions on ALS disease progression has not been systematically tested. To determine whether SSRIs impact disease progression, fluoxetine (Prozac, 5 or 10 mg/kg) was administered to mutant superoxide dismutase 1 (SOD1) mice during one of three age ranges: neonatal [postnatal day (P)5–11], adult presymptomatic (P30 to end stage), and adult symptomatic (P70 to end stage). Long-term adult fluoxetine treatment (started at either P30 or P70 and continuing until end stage) had no significant effect on disease progression. In contrast, neonatal fluoxetine treatment (P5-11) had two effects. First, all animals (mutant SOD1G93A and control: nontransgenic and SOD1WT) receiving the highest dose (10 mg/kg) had a sustained decrease in weight from P30 onward. Second, the high-dose SOD1G93A mice reached end stage ∼8 days (∼6% decrease in life span) sooner than vehicle and low-dose animals because of an increased rate of motor impairment. Fluoxetine increases synaptic serotonin (5-HT) levels, which is known to increase spinal motoneuron excitability. We confirmed that 5-HT increases spinal motoneuron excitability during this neonatal time period and therefore hypothesized that antagonizing 5-HT receptors during the same time period would improve disease outcome. However, cyproheptadine (1 or 5 mg/kg), a 5-HT receptor antagonist, had no effect on disease progression. These results show that a brief period of antidepressant treatment during a critical time window (the transition from neonatal to juvenile states) can be detrimental in ALS mouse models. PMID:24598527

  18. Analytical models for the 2DEG concentration and gate leakage current in AlGaN/GaN HEMTs

    Science.gov (United States)

    Ahmed, Nadim; Dutta, Aloke K.

    2017-06-01

    In this paper, we present a completely analytical model for the 2DEG concentration in AlGaN/GaN HEMTs as a function of gate bias, considering the donor-like trap states present at the metal/AlGaN interface to be the primary source of 2DEG carriers. To the best of our knowledge, this is a completely new contribution of this work. The electric field in the AlGaN layer is calculated using this model, which is further used to model the gate leakage current under reverse bias. We have modified the existing TTT (Thermionic Trap-Assisted Tunneling) current model, taking into account the effect of both metal/AlGaN interface traps as well as AlGaN bulk traps. The gate current under forward bias is also modeled using the existing thermionic emission model, approximating it by its Taylor series expansion. To take into account the effect of non-zero drain-source bias (VDS), an empirical fitting parameter is introduced in order to model the channel voltage in terms of VDS. The results of our models have been compared with the experimental data reported in the literature for three different devices, and the match is found to be excellent for both forward and reverse bias as well as for zero and non-zero VDS.

  19. Current collapse modeling in AlGaN/GaN HEMT using small signal equivalent circuit for high power application

    Science.gov (United States)

    Nirmal, D.; Arivazhagan, L.; Fletcher, A. S. Augustine; Ajayan, J.; Prajoon, P.

    2018-01-01

    In this paper, the drain current collapse in AlGaN/GaN High Electron Mobility Transistor (HEMT) with field plate engineering is investigated. A small signal equivalent circuit of AlGaN/GaN HEMT is developed and a new drain current model is derived. This model is useful to correlate the impact of intrinsic capacitance and conductance on drain current collapse. The proposed device suppressed the current collapse phenomena by 10% compared with the conventional AlGaN/GaN HEMT. Moreover, the DC characteristics of the simulated device shows a drain current of 900 mA/mm, breakdown voltage of 291 V and transconductance of 175 mS/mm. Besides, the intrinsic capacitance and conductance parameters are extracted and its impact on drain current is analysed. Finally, the simulation results obtained were in compliance with the derived mathematical model of AlGaN/GaN HEMT.

  20. Parent and family impact of autism spectrum disorders: a review and proposed model for intervention evaluation.

    Science.gov (United States)

    Karst, Jeffrey S; Van Hecke, Amy Vaughan

    2012-09-01

    Raising a child with an autism spectrum disorder (ASD) can be an overwhelming experience for parents and families. The pervasive and severe deficits often present in children with ASD are associated with a plethora of difficulties in caregivers, including decreased parenting efficacy, increased parenting stress, and an increase in mental and physical health problems compared with parents of both typically developing children and children with other developmental disorders. In addition to significant financial strain and time pressures, high rates of divorce and lower overall family well-being highlight the burden that having a child with an ASD can place on families. These parent and family effects reciprocally and negatively impact the diagnosed child and can even serve to diminish the positive effects of intervention. However, most interventions for ASD are evaluated only in terms of child outcomes, ignoring parent and family factors that may have an influence on both the immediate and long-term effects of therapy. It cannot be assumed that even significant improvements in the diagnosed child will ameliorate the parent and family distress already present, especially as the time and expense of intervention can add further family disruption. Thus, a new model of intervention evaluation is proposed, which incorporates these factors and better captures the transactional nature of these relationships.

  1. Families at risk of poor parenting: a model for service delivery, assessment, and intervention.

    Science.gov (United States)

    Ayoub, C; Jacewitz, M M

    1982-01-01

    The At Risk Parent Child Program is a multidisciplinary network agency designed for the secondary prevention of poor parenting and the extremes of child abuse and neglect. This model system of service delivery emphasizes (1) the coordination of existing community resources to access a target population of families at risk of parenting problems, (2) the provision of multiple special services in a neutral location (ambulatory pediatric clinic), and (3) the importance of intensive individual contact with a clinical professional who serves as primary therapist, social advocate and service coordinator for client families. Identification and assessment of families is best done during prenatal and perinatal periods. Both formal and informal procedures for screening for risk factors are described, and a simple set of at risk criteria for use by hospital nursing staff is provided. Preventive intervention strategies include special medical, psychological, social and developmental services, offered in an inpatient; outpatient, or in-home setting. Matching family needs to modality and setting of treatment is a major program concern. All direct services to at risk families are supplied by professionals employed within existing local agencies (hospital, public health department, state guidance center, and medical school pediatric clinic). Multiple agency involvement allows a broad-based screening capacity which allows thousands of families routine access to program services. The administrative center of the network stands as an independent, community-funded core which coordinates and monitors direct clinical services, and provides local political advocacy for families at risk of parenting problems.

  2. Family-centred care delivery: comparing models of primary care service delivery in Ontario.

    Science.gov (United States)

    Mayo-Bruinsma, Liesha; Hogg, William; Taljaard, Monica; Dahrouge, Simone

    2013-11-01

    To determine whether models of primary care service delivery differ in their provision of family-centred care (FCC) and to identify practice characteristics associated with FCC. Cross-sectional study. Primary care practices in Ontario (ie, 35 salaried community health centres, 35 fee-for-service practices, 32 capitation-based health service organizations, and 35 blended remuneration family health networks) that belong to 4 models of primary care service delivery. A total of 137 practices, 363 providers, and 5144 patients. Measures of FCC in patient and provider surveys were based on the Primary Care Assessment Tool. Statistical analyses were conducted using linear mixed regression models and generalized estimating equations. Patient-reported FCC scores were high and did not vary significantly by primary care model. Larger panel size in a practice was associated with lower odds of patients reporting FCC. Provider-reported FCC scores were significantly higher in community health centres than in family health networks (P = .035). A larger number of nurse practitioners and clinical services on-site were both associated with higher FCC scores, while scores decreased as the number of family physicians in a practice increased and if practices were more rural. Based on provider and patient reports, primary care reform strategies that encourage larger practices and more patients per family physician might compromise the provision of FCC, while strategies that encourage multidisciplinary practices and a range of services might increase FCC.

  3. Who steers the ship? Rural family physicians' views on collaborative care models for patients with dementia.

    Science.gov (United States)

    Kosteniuk, Julie; Morgan, Debra; Innes, Anthea; Keady, John; Stewart, Norma; D'Arcy, Carl; Kirk, Andrew

    2014-01-01

    Little is known about the views of rural family physicians (FPs) regarding collaborative care models for patients with dementia. The study aims were to explore FPs' views regarding this issue, their role in providing dementia care, and the implications of providing dementia care in a rural setting. This study employed an exploratory qualitative design with a sample of 15 FPs. All rural FPs indicated acceptance of collaborative models. The main disadvantages of practicing rural were accessing urban-based health care and related services and a shortage of local health care resources. The primary benefit of practicing rural was FPs' social proximity to patients, families, and some health care workers. Rural FPs provided care for patients with dementia that took into account the emotional and practical needs of caregivers and families. FPs described positive and negative implications of rural dementia care, and all were receptive to models of care that included other health care professionals.

  4. Diabetes: importancia de la familia y el trabajo en la adhesión al tratamiento Diabetes: the importance of family and work for the compliance with treatment

    Directory of Open Access Journals (Sweden)

    Susana C. Azzollini

    2011-12-01

    Full Text Available Se realizó un estudio correlacional con el objetivo de analizar la percepción del apoyo social en el ámbito familiar y laboral que tienen los pacientes con diagnóstico de diabetes tipo 2 y su relación con la adhesión a los tratamientos médicos. Se seleccionó una muestra probabilística al azar sistemático de 337 pacientes entre 40 y 79 años que concurrían a consultorios externos de cuatro hospitales públicos de la Ciudad de Buenos Aires durante el año 2010. Se administró, entre otros instrumentos, un cuestionario de datos personales y de percepción de apoyo social familiar y laboral, y una escala de frecuencias sobre prácticas de autocuidado; todos validados durante una investigación previa. Se concluye que el apoyo social, tanto familiar como laboral, favorece una mayor adherencia a los tratamientos a través del cumplimiento de pautas de autocuidado en pacientes con diagnóstico de diabetes tipo 2 que concurren a hospitales públicos.Objective: To analyze how patients who suffer from diabetes type II perceive the social support in two areas: family and work. Research design and Methods: In this correlational research of patients with diabetes type II, who are treated in public hospitals of Buenos Aires city, it was selected a probabilistic random systematic sampling composed by 337 patients (ages between 40 -79. They were given several instruments, including a questionnaire about biographic, personal, laborer, and social network´s questions, and a self-care practices scale. All the instruments were previously validated. Results: According to the breakthroughs, social support, from both family and work, favour the compliance with treatment by following the self care´s prescriptions.

  5. Interpolation Routines Assessment in ALS-Derived Digital Elevation Models for Forestry Applications

    Directory of Open Access Journals (Sweden)

    Antonio Luis Montealegre

    2015-07-01

    Full Text Available Airborne Laser Scanning (ALS is capable of estimating a variety of forest parameters using different metrics extracted from the normalized heights of the point cloud using a Digital Elevation Model (DEM. In this study, six interpolation routines were tested over a range of land cover and terrain roughness in order to generate a collection of DEMs with spatial resolution of 1 and 2 m. The accuracy of the DEMs was assessed twice, first using a test sample extracted from the ALS point cloud, second using a set of 55 ground control points collected with a high precision Global Positioning System (GPS. The effects of terrain slope, land cover, ground point density and pulse penetration on the interpolation error were examined stratifying the study area with these variables. In addition, a Classification and Regression Tree (CART analysis allowed the development of a prediction uncertainty map to identify in which areas DEMs and Airborne Light Detection and Ranging (LiDAR derived products may be of low quality. The Triangulated Irregular Network (TIN to raster interpolation method produced the best result in the validation process with the training data set while the Inverse Distance Weighted (IDW routine was the best in the validation with GPS (RMSE of 2.68 cm and RMSE of 37.10 cm, respectively.

  6. Modeling and Analysis of CNC Milling Process Parameters on Al3030 based Composite

    Science.gov (United States)

    Gupta, Anand; Soni, P. K.; Krishna, C. M.

    2018-04-01

    The machining of Al3030 based composites on Computer Numerical Control (CNC) high speed milling machine have assumed importance because of their wide application in aerospace industries, marine industries and automotive industries etc. Industries mainly focus on surface irregularities; material removal rate (MRR) and tool wear rate (TWR) which usually depends on input process parameters namely cutting speed, feed in mm/min, depth of cut and step over ratio. Many researchers have carried out researches in this area but very few have taken step over ratio or radial depth of cut also as one of the input variables. In this research work, the study of characteristics of Al3030 is carried out at high speed CNC milling machine over the speed range of 3000 to 5000 r.p.m. Step over ratio, depth of cut and feed rate are other input variables taken into consideration in this research work. A total nine experiments are conducted according to Taguchi L9 orthogonal array. The machining is carried out on high speed CNC milling machine using flat end mill of diameter 10mm. Flatness, MRR and TWR are taken as output parameters. Flatness has been measured using portable Coordinate Measuring Machine (CMM). Linear regression models have been developed using Minitab 18 software and result are validated by conducting selected additional set of experiments. Selection of input process parameters in order to get best machining outputs is the key contributions of this research work.

  7. Continuum modeling of {10Ῑ2} twinning in a Mg-3%Al-1%Zn rolled sheet

    Directory of Open Access Journals (Sweden)

    Pérez-Prado, M. T.

    2010-12-01

    Full Text Available Acrystal plasticity continuum model with differentiated self- and cross- hardeningmechanisms for twin and slip systems has been utilized to predict the slip/twin activities and texture evolution in a rolled and annealed Mg-3%Al-1%Zn sheet compressed along the rolling direction (RD and tensile tested along the normal direction (ND. The contribution of twinning is significantly larger during tension along ND, leading to a significant texture change with strain. A good correlation is found between simulations and recent experimental results.

    Un modelo continuo de plasticidad cristalina, que contempla los mecanismos de auto-endurecimiento y endurecimiento cruzado para los sistemas de maclado y deslizamiento, se ha utilizado para predecir las actividades de deslizamiento y del maclado, así como la evolución de la textura, de una chapa laminada y recocida de la aleación de magnesio Mg-3%Al-1%Zn ensayada en compresión, a lo largo de la dirección de laminación (DL y en tensión, a lo largo de la dirección normal (DN. Se encontró que la contribución del maclado es mucho más importante cuando la muestra se tensiona a lo lago de DN, lo que da lugar a un cambio fuerte de textura. Se observó una buena correspondencia entre las simulaciones y resultados experimentales recientes.

  8. Development Model Sustainable Promoted by the Family Agriculture in Function of Environmental Preservation

    Directory of Open Access Journals (Sweden)

    Sônia Maria Agra Zamith

    2016-10-01

    Full Text Available The objective of the research is to indicate directions of alternatives to self-sustainable development outlined at the principle of a family socioeconomic context, and sustainability, environmental  protection  promoted  by  family  agriculture.  The  inclusion  of  Family agriculture model in the discussion, of the preliminary verification of the agricultural production methods used by family units at the time ensuring the livelihood and allows the marketing  of  surplus  production  levels.  The  method  employed  was  the  hypothetical- deductive, with explanatory purpose, which means corresponded to the selection of authors who have the necessary support to the understanding of the precautionary principle in environmental law.

  9. A Unified Physical Model for Creep and Hot Working of Al-Mg Solid Solution Alloys

    Directory of Open Access Journals (Sweden)

    Stefano Spigarelli

    2017-12-01

    Full Text Available The description of the dependence of steady-state creep rate on applied stress and temperature is almost invariably based on the Norton equation or on derived power-law relationships. In hot working, the Norton equation does not work, and is therefore usually replaced with the Garofalo (sinh equation. Both of these equations are phenomenological in nature and can be seldom unambiguously related to microstructural parameters, such as dislocation density, although early efforts in this sense led to the introduction of the “natural power law” with exponent 3. In an attempt to overcome this deficiency, a recent model with sound physical basis has been successfully used to describe the creep response of fcc metals, such as copper. The main advantage of this model is that it does not require any data fitting to predict the strain rate dependence on applied stress and temperature, which is a particularly attractive peculiarity when studying the hot workability of metals. Thus, the model, properly modified to take into account solid solution strengthening effects, has been here applied to the study of the creep and hot-working of simple Al-Mg single phase alloys. The model demonstrated an excellent accuracy in describing both creep and hot working regimes, still maintaining its most important feature, that is, it does not require any fitting of the experimental data.

  10. Family Environment and Childhood Obesity: A New Framework with Structural Equation Modeling

    Directory of Open Access Journals (Sweden)

    Hui Huang

    2017-02-01

    Full Text Available The main purpose of the current article is to introduce a framework of the complexity of childhood obesity based on the family environment. A conceptual model that quantifies the relationships and interactions among parental socioeconomic status, family food security level, child’s food intake and certain aspects of parental feeding behaviour is presented using the structural equation modeling (SEM concept. Structural models are analysed in terms of the direct and indirect connections among latent and measurement variables that lead to the child weight indicator. To illustrate the accuracy, fit, reliability and validity of the introduced framework, real data collected from 630 families from Urumqi (Xinjiang, China were considered. The framework includes two categories of data comprising the normal body mass index (BMI range and obesity data. The comparison analysis between two models provides some evidence that in obesity modeling, obesity data must be extracted from the dataset and analysis must be done separately from the normal BMI range. This study may be helpful for researchers interested in childhood obesity modeling based on family environment.

  11. Phase constitution and interface structure of nano-sized Ag-Cu/AlN multilayers: Experiment and ab initio modeling

    Energy Technology Data Exchange (ETDEWEB)

    Pigozzi, Giancarlo; Janczak-Rusch, Jolanta; Passerone, Daniele; Antonio Pignedoli, Carlo; Patscheider, Joerg; Jeurgens, Lars P. H. [Empa, Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Antusek, Andrej [Empa, Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Faculty of Materials Science and Technology, Slovak University of Technology in Bratislava, Paulinska 16, 917 24 Trnava (Slovakia); Parlinska-Wojtan, Magdalena [Empa, Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); University of Rzeszow, Institute of Physics, ul. Rejtana 16a, 35-959 Rzeszow (Poland); Bissig, Vinzenz [Kirsten Soldering AG, Hinterbergstrasse 32, CH-6330 Cham (Switzerland)

    2012-10-29

    Nano-sized Ag-Cu{sub 8nm}/AlN{sub 10nm} multilayers were deposited by reactive DC sputtering on {alpha}-Al{sub 2}O{sub 3}(0001) substrates. Investigation of the phase constitution and interface structure of the multilayers evidences a phase separation of the alloy sublayers into nanosized grains of Ag and Cu. The interfaces between the Ag grains and the quasi-single-crystalline AlN sublayers are semi-coherent, whereas the corresponding Cu/AlN interfaces are incoherent. The orientation relationship between Ag and AlN is constant throughout the entire multilayer stack. These observations are consistent with atomistic models of the interfaces as obtained by ab initio calculations.

  12. Integrating family work into the treatment of young people with severe and complex depression: a developmentally focused model.

    Science.gov (United States)

    Rice, Simon; Halperin, Stephen; Blaikie, Simon; Monson, Katherine; Stefaniak, Rachel; Phelan, Mark; Davey, Christopher

    2018-04-01

    Although models of family intervention are clearly articulated in the child and early adolescent literature, there is less clarity regarding family intervention approaches in later adolescence and emerging adulthood. This study provides the rationale and intervention framework for a developmentally sensitive model of time-limited family work in the outpatient treatment of complex youth depression (15-25 years). Derived from current practice in the Youth Mood Clinic (YMC) at Orygen Youth Health, Melbourne, a stepped model of family intervention is discussed. YMC aims to provide comprehensive orientation, assessment and education to all families. For some, a family-based intervention, delivered either by the treating team or through the integration of a specialist family worker, offers an important adjunct in supporting the recovery of the young person. Developmental phases and challenges experienced by the young person with respect to family/caregiver involvement are discussed in the context of two case studies. A developmentally sensitive model is presented with particular attention to the developmental needs and preferences of young people. Formal evaluation of this model is required. Evaluation perspectives should include young people, caregivers, the broader family system (i.e. siblings) and the treating team (i.e. case manager, doctor and family worker) incorporating outcome measurement. Such work determines how best to apply a time-limited family-based intervention approach in strengthening family/caregiver relationships as part of the young person's recovery from severe and complex depression. © 2016 John Wiley & Sons Australia, Ltd.

  13. A model for intra-familial distribution of an infectious disease (Chagas' disease

    Directory of Open Access Journals (Sweden)

    M. F. Feitosa

    1993-06-01

    Full Text Available A probabilistic model for intra-familial distribution of infectous disease is proposed and applied to the prevalence of positive serology for Trypanosoma cruzi infection in Northeastern Brazilian sample. This double with one tail excess model fits satisfactorily to the data and its interpretation says that around 51% of these 982 families are free of infection risk; among those that are at risk, 3% have a high risk (0.66, probably due to high domestic infestation of the vector bug; while 97% show a small risk (0.11, probably due to accidental, non-domestic transmission.

  14. Blow-up of solutions to the rotation b-family system modeling equatorial water waves

    Directory of Open Access Journals (Sweden)

    Min Zhu

    2018-03-01

    Full Text Available We consider the blow-up mechanism to the periodic generalized rotation b-family system (R-b-family system. This model can be derived from the f-plane governing equations for the geographical water waves with a constant underlying current in the equatorial water waves with effect of the Coriolis force. When b=2, it is a rotation two-component Camassa-Holm (R2CH system. We consider the periodic R2CH system when linear dispersion is absent (which model is called r2CH system and derive two finite-time blow-up results.

  15. Atomistic modelling of the interdiffusion of Al in the UMo based fuel

    International Nuclear Information System (INIS)

    Garces, Jorge E.; Marino, Armando C.; Bozzolo, Guillermo

    2002-01-01

    The analysis of the initial stages and trends in the process of interdiffusion of Al in the UMo solid solution as a function of Mo concentration is made using the BFS method for alloys. The approach presented in this work helps to understand the exchange mechanism between adatoms and substrate atoms in the binary systems, leading to the behavior observed in the ternary Al-U-Mo system. While in Al/U Al atoms show a noticeable tendency to interdiffusion in the bulk, in Al/Mo the same atoms show a tendency to layer-by-layer growth and the formation of structures in the overlayer. In the case of Al/U-Mo, the two competing behaviors observed for Al/Mo and Al/U, translate into the role of regions rich in Mo acting as interdiffusion barriers, in excellent agreement with experimental evidence. (author)

  16. Stochastic modeling of columnar dendritic grain growth in weld pool of Al-Cu alloy

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Z.B.; Tian, N. [The State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin (China); Wei, Y.H. [College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing (China); The State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin (China); Zhan, X.H.

    2009-04-15

    A multi-scale model is used to simulate columnar dendritic growth in TIG (tungsten inert-gas) weld molten pool of Al-Cu alloy. The grain morphologies at the edge of the weld pool are studied. The simulated results indicate that the average primary dendrite spacing changes during the solidification process in the weld pool because of the complicated thermal field, solute diffusion field and competitive growth. And it is shown that the secondary dendrite arms grow insufficiently in the space between dendrite trunks if the primary dendrite spacing is small. And the phenomenon has been explained by analyzing the influence of the solute accumulation on the constitutional undercooling and undercooling gradient when there are two different opposite solute diffusion fields. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  17. Modelling of anisotropy for Al-Li 2099 T83 extrusions and effect of precipitate density

    International Nuclear Information System (INIS)

    Bois-Brochu, Alexandre; Blais, Carl; Tchitembo Goma, Franck Armel; Larouche, Daniel

    2016-01-01

    The development of aluminum-lithium alloys for aerospace applications requires a thorough understanding of how processing and product geometry impact their microstructure, texture and mechanical properties. The anisotropy of the mechanical properties is in part related to the deformation texture formed during thermo-mechanical processing. In this study, two different extrusions of Al-Li 2099 T83 were characterized, a cylindrical extrusion and an integrally stiffened panel (ISP). A model is proposed to predict mechanical properties and their anisotropy as a function of the <111> fiber texture. Furthermore, the volume fraction of precipitates was measured in zones of high anisotropy (cylindrical extrusion) and low anisotropy (ISP). Results show that there is no significant difference between the two parts concerning volume fraction of precipitates.

  18. Modelling of anisotropy for Al-Li 2099 T83 extrusions and effect of precipitate density

    Energy Technology Data Exchange (ETDEWEB)

    Bois-Brochu, Alexandre, E-mail: Alexandre.Bois-Brochu.1@ulaval.ca; Blais, Carl, E-mail: Carl.Blais@gmn.ulaval.ca; Tchitembo Goma, Franck Armel, E-mail: Franck-Armel.Tchitembo-Goma.1@ulaval.ca; Larouche, Daniel, E-mail: Daniel.Larouche@gmn.ulaval.ca

    2016-09-15

    The development of aluminum-lithium alloys for aerospace applications requires a thorough understanding of how processing and product geometry impact their microstructure, texture and mechanical properties. The anisotropy of the mechanical properties is in part related to the deformation texture formed during thermo-mechanical processing. In this study, two different extrusions of Al-Li 2099 T83 were characterized, a cylindrical extrusion and an integrally stiffened panel (ISP). A model is proposed to predict mechanical properties and their anisotropy as a function of the <111> fiber texture. Furthermore, the volume fraction of precipitates was measured in zones of high anisotropy (cylindrical extrusion) and low anisotropy (ISP). Results show that there is no significant difference between the two parts concerning volume fraction of precipitates.

  19. Computational Study of Ethanol Conversion on Al 8 O 12 as a Model for γ-Al 2 O 3

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Zongtang; Wang, Yong; Dixon, David A.

    2015-10-15

    Correlated molecular orbital theory at the coupled cluster CCSD(T) level with density functional theory geometries is used to study ethanol dehydration, dehydrogenation, and condensation reactions on an the Al8O12 cluster which is a model for γ-Al2O3. The Al in the active site on the cluster is a strong Lewis acid. The reactions begin with formation of a very stable Lewis acid–base ethanol–cluster adduct. Dehydration proceeds by β-H transfer to a bicoordinate oxygen leading to the direct formation of ethylene and two OH groups following an E2 mechanism. Dehydrogenation proceeds directly by α-H transfer to the active metal center and a proton transfer to a bicoordinate bridge O to form acetaldehyde plus a metal hydride and a hydroxyl, again an E2 mechanism. After addition of a second ethanol, diethyl ether is generated by an α-C transfer from the first to the second ethanol, an acid-driven SN2 mechanism. Condensation and dehydration with two alcohols have comparable energy barriers. The addition of a second ethanol or a water molecule raises the energy barriers. Condensation and dehydration are predicted to be more likely than dehydrogenation. The computational results for the mechanism and the energetics agree well with the available experimental data.

  20. A Footprint Family extended MRIO model to support Europe's transition to a One Planet Economy.

    Science.gov (United States)

    Galli, Alessandro; Weinzettel, Jan; Cranston, Gemma; Ercin, Ertug

    2013-09-01

    Currently, the European economy is using nearly three times the ecological assets that are locally available. This situation cannot be sustained indefinitely. Tools are needed that can help reverse the unsustainable trend. In 2010, an EC funded One Planet Economy Network: Europe (OPEN:EU) project was launched to develop the evidence and innovative practical tools that will allow policy-makers and civil society to identify policy interventions to transform Europe into a One Planet Economy, by 2050. Building on the premise that no indicator alone is able to comprehensively monitor (progress towards) sustainability, the project has drawn on the Ecological, Carbon and Water Footprints to define a Footprint Family suite of indicators, to track human pressure on the planet. An environmentally-extended multi-regional input-output (MRIO) model has then been developed to group the Footprint Family under a common framework and combine the indicators in the family with national economic accounts and trade statistics. Although unable to monitor the full spectrum of human pressures, once grouped within the MRIO model, the Footprint Family is able to assess the appropriation of ecological assets, GHG emissions as well as freshwater consumption and pollution associated with consumption of specific products and services within a specified country. Using MRIO models within the context of Footprint analyses also enables the Footprint Family to take into account full production chains with technologies specific to country of origin. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Thermodynamic modelling and Gulliver-Scheil simulation of multi-component Al alloys

    International Nuclear Information System (INIS)

    Du Yong; Liu Shuhong; Chang, Keke; Hu Biao; Bu Mengjie; Jie Wanqi; Huang Weidong; Wang Jincheng

    2012-01-01

    Based on critical review for the available experimental phase diagram data of the Al-Cu-Fe-Mn, Al-Cu-Fe-Ni, Al-Cu-Fe-Si, Al-Fe-Mg-Si, Al-Fe-Mn-Si, and Al-Mg-Mn-Zn systems, a set of self-consistent thermodynamic parameters for these systems has been established using CALPHAD approach. In combination with the constituent binary, ternary, and quaternary systems, a thermodynamic database for the Al-Cu-Fe-Mg-Mn-Ni-Si-Zn system is developed. The calculated phase diagrams and invariant reactions agree well with the experimental data. The obtained database has been used to describe the solidification behaviour of Al alloys: Al365.1(91.95Al-0.46Fe-0.3Mg-0.32Mn-6.97Si, in wt.%) and Al365.2 (92.77Al-0.08Fe-0.35Mg-6.8Si, in wt.%) under both equilibrium and Gulliver-Scheil non-equilibrium conditions. The reliability of the present thermodynamic database is verified by the good agreement between calculation and measurement for both equilibrium and Gulliver–Scheil non-equilibrium solidification.

  2. The HadGEM2 family of Met Office Unified Model climate configurations

    Directory of Open Access Journals (Sweden)

    The HadGEM2 Development Team: G. M. Martin

    2011-09-01

    Full Text Available We describe the HadGEM2 family of climate configurations of the Met Office Unified Model, MetUM. The concept of a model "family" comprises a range of specific model configurations incorporating different levels of complexity but with a common physical framework. The HadGEM2 family of configurations includes atmosphere and ocean components, with and without a vertical extension to include a well-resolved stratosphere, and an Earth-System (ES component which includes dynamic vegetation, ocean biology and atmospheric chemistry. The HadGEM2 physical model includes improvements designed to address specific systematic errors encountered in the previous climate configuration, HadGEM1, namely Northern Hemisphere continental temperature biases and tropical sea surface temperature biases and poor variability. Targeting these biases was crucial in order that the ES configuration could represent important biogeochemical climate feedbacks. Detailed descriptions and evaluations of particular HadGEM2 family members are included in a number of other publications, and the discussion here is limited to a summary of the overall performance using a set of model metrics which compare the way in which the various configurations simulate present-day climate and its variability.

  3. In silico modeling of the yeast protein and protein family interaction network

    Science.gov (United States)

    Goh, K.-I.; Kahng, B.; Kim, D.

    2004-03-01

    Understanding of how protein interaction networks of living organisms have evolved or are organized can be the first stepping stone in unveiling how life works on a fundamental ground. Here we introduce an in silico ``coevolutionary'' model for the protein interaction network and the protein family network. The essential ingredient of the model includes the protein family identity and its robustness under evolution, as well as the three previously proposed: gene duplication, divergence, and mutation. This model produces a prototypical feature of complex networks in a wide range of parameter space, following the generalized Pareto distribution in connectivity. Moreover, we investigate other structural properties of our model in detail with some specific values of parameters relevant to the yeast Saccharomyces cerevisiae, showing excellent agreement with the empirical data. Our model indicates that the physical constraints encoded via the domain structure of proteins play a crucial role in protein interactions.

  4. Atomistic modeling and simulation of the role of Be and Bi in Al diffusion in U-Mo fuel

    Science.gov (United States)

    Hofman, G. L.; Bozzolo, G.; Mosca, H. O.; Yacout, A. M.

    2011-07-01

    Within the RERTR program, previous experimental and modeling studies identified Si as the alloying addition to the Al cladding responsible for inhibiting Al interdiffusion in the UMo fuel. However, difficulties with reprocessing have rendered this choice inappropriate, leading to the need to study alternative elements. In this work, we discuss the results of an atomistic modeling effort which allows for the systematic study of several possible alloying additions. Based on the behavior observed in the phase diagrams, beryllium or bismuth additions suggest themselves as possible options to replace Si. The results of temperature-dependent simulations using the Bozzolo-Ferrante-Smith (BFS) method for the energetics for varying concentrations of either element are shown, indicating that Be could have a substantial effect in stopping Al interdiffusion, while Bi does not. Details of the calculations and the dependence of the role of each alloying addition as a function of temperature and concentration (of beryllium or bismuth in Al) are shown.

  5. Atomistic modeling and simulation of the role of Be and Bi in Al diffusion in U-Mo fuel

    Energy Technology Data Exchange (ETDEWEB)

    Hofman, G.L. [Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439 (United States); Bozzolo, G., E-mail: guille_bozzolo@yahoo.com [Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439 (United States); Mosca, H.O. [Gerencia de Investigaciones y Aplicaciones, CNEA, Av. Gral Paz 1499, B165KNA, San Martin, Buenos Aires (Argentina); Yacout, A.M. [Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439 (United States)

    2011-07-15

    Within the RERTR program, previous experimental and modeling studies identified Si as the alloying addition to the Al cladding responsible for inhibiting Al interdiffusion in the UMo fuel. However, difficulties with reprocessing have rendered this choice inappropriate, leading to the need to study alternative elements. In this work, we discuss the results of an atomistic modeling effort which allows for the systematic study of several possible alloying additions. Based on the behavior observed in the phase diagrams, beryllium or bismuth additions suggest themselves as possible options to replace Si. The results of temperature-dependent simulations using the Bozzolo-Ferrante-Smith (BFS) method for the energetics for varying concentrations of either element are shown, indicating that Be could have a substantial effect in stopping Al interdiffusion, while Bi does not. Details of the calculations and the dependence of the role of each alloying addition as a function of temperature and concentration (of beryllium or bismuth in Al) are shown.

  6. First-principles calculations, experimental study, and thermodynamic modeling of the Al-Co-Cr system.

    Directory of Open Access Journals (Sweden)

    Xuan L Liu

    Full Text Available The phase relations and thermodynamic properties of the condensed Al-Co-Cr ternary alloy system are investigated using first-principles calculations based on density functional theory (DFT and phase-equilibria experiments that led to X-ray diffraction (XRD and electron probe micro-analysis (EPMA measurements. A thermodynamic description is developed by means of the calculations of phase diagrams (CALPHAD method using experimental and computational data from the present work and the literature. Emphasis is placed on modeling the bcc-A2, B2, fcc-γ, and tetragonal-σ phases in the temperature range of 1173 to 1623 K. Liquid, bcc-A2 and fcc-γ phases are modeled using substitutional solution descriptions. First-principles special quasirandom structures (SQS calculations predict a large bcc-A2 (disordered/B2 (ordered miscibility gap, in agreement with experiments. A partitioning model is then used for the A2/B2 phase to effectively describe the order-disorder transitions. The critically assessed thermodynamic description describes all phase equilibria data well. A2/B2 transitions are also shown to agree well with previous experimental findings.

  7. On modeling the CNC end milling characteristics of Al-7075/WC powder metallurgy composites

    Science.gov (United States)

    Hanuman, N. S. V. N.; Rao, P. Gangadhara; Kumar, B. Sudheer; Karthik, N.

    2017-07-01

    Surface finish and material removal rate are two important factors in the manufacturing which affect acceptability of the product which in turn reflects on the profitability of the organization. The worth of the production setup to produce the components with high material removal rate (MRR) without sacrificing the surface requirements can play vital role in sustainability and profitability of the organization. In this paper, the effect of process parameters on metal removal rate and surface roughness has been investigated in milling of Al7075-MMC with WC as reinforcement element. Cutting speed, feed and depth of cut have been taken as input factors in three level response surface methodologies used for experimentation. Mathematical models have been developed using response surface methodology to predict surface finish, and metal removal rate in term of machining parameters. Depth of cut and feed rate are found to be a dominant parameter for surface roughness; whereas feed rate mainly affects the metal removal rate. The results of mathematical models have been compared with the experimental and found to be in good agreement. The results of predicted model can be used in selection of process parameters to insure desired quality and improved productivity.

  8. D Model of AL Zubarah Fortress in Qatar - Terrestrial Laser Scanning VS. Dense Image Matching

    Science.gov (United States)

    Kersten, T.; Mechelke, K.; Maziull, L.

    2015-02-01

    In September 2011 the fortress Al Zubarah, built in 1938 as a typical Arabic fortress and restored in 1987 as a museum, was recorded by the HafenCity University Hamburg using terrestrial laser scanning with the IMAGER 5006h and digital photogrammetry for the Qatar Museum Authority within the framework of the Qatar Islamic Archaeology and Heritage Project. One goal of the object recording was to provide detailed 2D/3D documentation of the fortress. This was used to complete specific detailed restoration work in the recent years. From the registered laser scanning point clouds several cuttings and 2D plans were generated as well as a 3D surface model by triangle meshing. Additionally, point clouds and surface models were automatically generated from digital imagery from a Nikon D70 using the open-source software Bundler/PMVS2, free software VisualSFM, Autodesk Web Service 123D Catch beta, and low-cost software Agisoft PhotoScan. These outputs were compared with the results from terrestrial laser scanning. The point clouds and surface models derived from imagery could not achieve the same quality of geometrical accuracy as laser scanning (i.e. 1-2 cm).

  9. The Double ABCX Model of Adaptation in Racially Diverse Families with a School-Age Child with Autism

    Science.gov (United States)

    Manning, Margaret M.; Wainwright, Laurel; Bennett, Jillian

    2011-01-01

    In this study, the Double ABCX model of family adaptation was used to explore the impact of severity of autism symptoms, behavior problems, social support, religious coping, and reframing, on outcomes related to family functioning and parental distress. The sample included self-report measures collected from 195 families raising school-age…

  10. Search for the fourth standard model family fermions and E6 quarks at μ+μ- colliders

    International Nuclear Information System (INIS)

    Ciftci, A.K.; Ciftci, R.; Sultansoy, S.

    2002-01-01

    The potential of μ + μ - colliders to investigate the fourth standard model family fermions predicted by flavor democracy is analyzed. It is shown that muon colliders are advantageous for both pair production of fourth family fermions and resonance production of fourth family quarkonia. Also, isosinglet quark production at μ + μ - colliders is investigated

  11. On models of health assistance and the program of family health of the Brazilian Health Department

    Directory of Open Access Journals (Sweden)

    Claudia Hausman Silveira

    2008-08-01

    Full Text Available The article makes reference to the three models that have inspired the construction of the Program of Family Health in Brazil (Cuban, English and Canadian, observing their differences and similarities and comparing them with the Brazilian case. Therefore, an associative line is also constructed between the Only System of Health (SUS and the necessity of a practice which allows the functioning of its lines of direction and organization principles. Thus, we reach the conclusion that the Program of Family Health in Brazil, for its multi professional work proposal in interdisciplinary teams, in accordance with the SUS, can help keep the law of health in the Country. Key-words: SUS; Program of Family Health; Interdisciplinary; Medical care model; Sanitary practice

  12. Statistical and Geometrical Way of Model Selection for a Family of Subdivision Schemes

    Institute of Scientific and Technical Information of China (English)

    Ghulam MUSTAFA

    2017-01-01

    The objective of this article is to introduce a generalized algorithm to produce the m-point n-ary approximating subdivision schemes (for any integer m,n ≥ 2).The proposed algorithm has been derived from uniform B-spline blending functions.In particular,we study statistical and geometrical/traditional methods for the model selection and assessment for selecting a subdivision curve from the proposed family of schemes to model noisy and noisy free data.Moreover,we also discuss the deviation of subdivision curves generated by proposed family of schemes from convex polygonal curve.Furthermore,visual performances of the schemes have been presented to compare numerically the Gibbs oscillations with the existing family of schemes.

  13. Predicting employees' well-being using work-family conflict and job strain models.

    Science.gov (United States)

    Karimi, Leila; Karimi, Hamidreza; Nouri, Aboulghassem

    2011-04-01

    The present study examined the effects of two models of work–family conflict (WFC) and job-strain on the job-related and context-free well-being of employees. The participants of the study consisted of Iranian employees from a variety of organizations. The effects of three dimensions of the job-strain model and six forms of WFC on affective well-being were assessed. The results of hierarchical multiple regression analysis revealed that the number of working hours, strain-based work interfering with family life (WIF) along with job characteristic variables (i.e. supervisory support, job demands and job control) all make a significant contribution to the prediction of job-related well-being. On the other hand, strain-based WIF and family interfering with work (FIW) significantly predicted context-free well-being. Implications are drawn and recommendations made regarding future research and interventions in the workplace.

  14. Modeling on oxide dependent 2DEG sheet charge density and threshold voltage in AlGaN/GaN MOSHEMT

    Science.gov (United States)

    Panda, J.; Jena, K.; Swain, R.; Lenka, T. R.

    2016-04-01

    We have developed a physics based analytical model for the calculation of threshold voltage, two dimensional electron gas (2DEG) density and surface potential for AlGaN/GaN metal oxide semiconductor high electron mobility transistors (MOSHEMT). The developed model includes important parameters like polarization charge density at oxide/AlGaN and AlGaN/GaN interfaces, interfacial defect oxide charges and donor charges at the surface of the AlGaN barrier. The effects of two different gate oxides (Al2O3 and HfO2) are compared for the performance evaluation of the proposed MOSHEMT. The MOSHEMTs with Al2O3 dielectric have an advantage of significant increase in 2DEG up to 1.2 × 1013 cm-2 with an increase in oxide thickness up to 10 nm as compared to HfO2 dielectric MOSHEMT. The surface potential for HfO2 based device decreases from 2 to -1.6 eV within 10 nm of oxide thickness whereas for the Al2O3 based device a sharp transition of surface potential occurs from 2.8 to -8.3 eV. The variation in oxide thickness and gate metal work function of the proposed MOSHEMT shifts the threshold voltage from negative to positive realizing the enhanced mode operation. Further to validate the model, the device is simulated in Silvaco Technology Computer Aided Design (TCAD) showing good agreement with the proposed model results. The accuracy of the developed calculations of the proposed model can be used to develop a complete physics based 2DEG sheet charge density and threshold voltage model for GaN MOSHEMT devices for performance analysis.

  15. Mediational Model of Multiple Sclerosis Impairments, Family Needs, and Caregiver Mental Health in Guadalajara, Mexico

    Directory of Open Access Journals (Sweden)

    Melody N. Mickens

    2018-01-01

    Full Text Available Individuals with multiple sclerosis (MS, especially those living in Latin America, often require assistance from family caregivers throughout the duration of the disease. Previous research suggests that family caregivers may experience positive and negative outcomes from providing care to individuals with MS, but few studies have examined the unmet needs of individuals providing care to family members with MS and how these unmet needs may mediate the relationship between MS symptoms and caregiver mental health. The current study examined the relationships among MS impairments (functional, neurological, cognitive, behavioral, and emotional, unmet family needs (household, informational, financial, social support, and health, and caregiver mental health (satisfaction with life, anxiety, burden, and depression in a sample of 81 MS caregivers from Guadalajara, Mexico. A structural equation model demonstrated the mediational effect of unmet family needs on the relationship between MS impairments and caregiver mental health. These findings suggest that intervention research on MS caregivers in Latin America may consider focusing on caregiver mental health problems by addressing unmet family needs and teaching caregivers ways to manage the impairments of the individual with MS.

  16. Modeling of mechanical properties of as-cast Mg-Li-Al alloys based on PSO-BP algorithm

    Directory of Open Access Journals (Sweden)

    Li Ming

    2012-05-01

    Full Text Available Artificial neural networks have been widely used to predict the mechanical properties of alloys in material research. This study aims to investigate the implicit relationship between the compositions and mechanical properties of as-cast Mg-Li-Al alloys. Based on the experimental collection of the tensile strength and the elongation of representative Mg-Li-Al alloys, a momentum back-propagation (BP neural network with a single hidden layer was established. Particle swarm optimization (PSO was applied to optimize the BP model. In the neural network, the input variables were the contents of Mg, Li and Al, and the output variables were the tensile strength and the elongation. The results show that the proposed PSO-BP model can describe the quantitative relationship between the Mg-Li-Al alloy’s composition and its mechanical properties. It is possible that the mechanical properties to be predicted without experiment by inputting the alloy composition into the trained network model. The prediction of the influence of Al addition on the mechanical properties of as-cast Mg-Li-Al alloys is consistent with the related research results.

  17. Effect of phase interaction on catalytic CO oxidation over the SnO_2/Al_2O_3 model catalyst

    International Nuclear Information System (INIS)

    Chai, Shujing; Bai, Xueqin; Li, Jing; Liu, Cheng; Ding, Tong; Tian, Ye; Liu, Chang; Xian, Hui; Mi, Wenbo; Li, Xingang

    2017-01-01

    Highlights: • Activity for CO oxidation is greatly enhanced by interaction between SnO_2 and Al_2O_3. • Interaction between SnO_2 and Al_2O_3 phases can generate oxygen vacancies. • Oxygen vacancies play an import role for catalytic CO oxidation. • Sn"4"+ cations are the effective sites for catalytic CO oxidation. • Langmuir-Hinshelwood model is preferred for catalytic CO oxidation. - Abstract: We investigated the catalytic CO oxidation over the SnO_2/Al_2O_3 model catalysts. Our results show that interaction between the Al_2O_3 and SnO_2 phases results in the significantly improved catalytic activity because of the formation of the oxygen vacancies. The oxygen storage capacity of the SnO_2/Al_2O_3 catalyst prepared by the physically mixed method is nearly two times higher than that of the SnO_2, which probably results from the change of electron concentration on the interface of the SnO_2 and Al_2O_3 phases. Introducing water vapor to the feeding gas would a little decrease the activity of the catalysts, but the reaction rate could completely recover after removal of water vapor. The kinetics results suggest that the surface Sn"4"+ cations are effective CO adsorptive sites, and the surface adsorbed oxygen plays an important role upon CO oxidation. The reaction pathways upon the SnO_2-based catalysts for CO oxidation follow the Langmuir-Hinshelwood model.

  18. A Formative Evaluation of the Children, Youth, and Families at Risk Coaching Model

    Science.gov (United States)

    Olson, Jonathan R.; Smith, Burgess; Hawkey, Kyle R.; Perkins, Daniel F.; Borden, Lynne M.

    2016-01-01

    In this article, we describe the results of a formative evaluation of a coaching model designed to support recipients of funding through the Children, Youth, and Families at Risk (CYFAR) initiative. Results indicate that CYFAR coaches draw from a variety of types of coaching and that CYFAR principle investigators (PIs) are generally satisfied with…

  19. Applying the Nominal Response Model within a Longitudinal Framework to Construct the Positive Family Relationships Scale

    Science.gov (United States)

    Preston, Kathleen Suzanne Johnson; Parral, Skye N.; Gottfried, Allen W.; Oliver, Pamella H.; Gottfried, Adele Eskeles; Ibrahim, Sirena M.; Delany, Danielle

    2015-01-01

    A psychometric analysis was conducted using the nominal response model under the item response theory framework to construct the Positive Family Relationships scale. Using data from the Fullerton Longitudinal Study, this scale was constructed within a long-term longitudinal framework spanning middle childhood through adolescence. Items tapping…

  20. The Managerial Motivation Models Appear To Be in the Family Way.

    Science.gov (United States)

    Lanser, Kris

    Managerial motivation models have evolved beyond the human resource tradition of the 1960s and the 1970s to a form of corporate involvement with the personal needs of employees, many of whose family lifestyles have changed dramatically. To analyze the new role for companies and the corporate concern for employees' well-being, this research study…

  1. Stress in adolescents with a chronically ill parent: inspiration from Rolland's Family Systems-Illness model

    NARCIS (Netherlands)

    Sieh, D.S.; Dikkers, A.L.C.; Visser-Meily, J.M.A.; Meijer, A.M.

    2012-01-01

    This article was inspired by Rolland’s Family Systems-Illness (FSI) model, aiming to predict adolescent stress as a function of parental illness type. Ninety-nine parents with a chronic medical condition, 82 partners, and 158 adolescent children (51 % girls; mean age = 15.1 years) participated in

  2. Becoming Stronger at Broken Places: A Model for Group Work with Young Adult from Divorced Families.

    Science.gov (United States)

    Hage, Sally M.; Nosanow, Mia

    2000-01-01

    Describes a model for group work with young adults from divorced families using an 8-session psychoeducational group intervention. Goals include reducing isolation, establishing connectedness, and building a stronger sense of identify. By educating young adults on topics such as assertiveness, communication skills, and self-esteem, it will give…

  3. A time-motion study of inpatient rounds using a family-centered rounds model

    NARCIS (Netherlands)

    Bhansali, P.; Birch, S.; Campbell, J.K.; Agrawal, D.; Hoffner, W.; Manicone, P.; Shah, K.; Krieger, E.; Ottolini, M.

    2013-01-01

    OBJECTIVE: Family-centered rounds (FCR) have become increasingly prevalent in pediatric hospital settings. The objective of our study was to describe time use and discrete events during pediatric inpatient rounds by using a FCR model. METHODS: We conducted a prospective observational study at

  4. The Conservation of Resources Model Applied to Work-Family Conflict and Strain.

    Science.gov (United States)

    Grandey, Alicia A.; Cropanzano, Russell

    1999-01-01

    Using time-lagged research design and path analysis, findings from 132 college faculty supported the conservation of resources model, which predicts that, as chronic work and family stressors drain resources, dissatisfaction and life distress increase and health declines. Self-esteem was not a moderating variable. (SK)

  5. Families of Children with Disabilities in Elementary and Middle School: Advocacy Models and Strategies.

    Science.gov (United States)

    Alper, Sandra; And Others

    1996-01-01

    This article describes models and methods of advocacy for families of children with disabilities in elementary and middle school, including self-advocacy, social support advocacy, interpersonal advocacy, and legal advocacy. Issues for parents during these years are discussed, as are the role and needs of siblings. Advocacy is seen as a dynamic…

  6. Toward a Dialectical Model of Family Gender Discourse: Body, Identity, and Sexuality.

    Science.gov (United States)

    Blume, Libby Balter; Blume, Thomas W.

    2003-01-01

    Proposes a dialectical model representing gender discourse in families. A brief review of literature in sociology, psychology, and gender studies focuses on three dialectical issues: nature versus culture, similarity versus difference, and stability versus fluidity. Deconstructing gender theories from a postmodern feminist perspective, the authors…

  7. Breaking the Patriarchal Vision of Social Science: Lessons from a Family Therapy Model.

    Science.gov (United States)

    McNamee, Sheila

    The Milan model of systemic family therapy, developed in Italy and based on G. Bateson's cybernetic epistemology, can help meet the goals of a feminist/systemic epistemology in research by accepting data in its "traditional" form yet also connecting it to the act of researching, itself, thereby merging a feminist perspective with the…

  8. Completing the Heterocubane Family [Cp*AlE]4 (E = O, S, Se, and Te) by Selective Oxygenation and Sulfuration of [Cp*Al]4: Density Functional Theory Calculations of [Cp*AlE]4 and Reactivity of [Cp*AlO]4 toward Hydrolysis.

    Science.gov (United States)

    Stelzer, Adrian C; Hrobárik, Peter; Braun, Thomas; Kaupp, Martin; Braun-Cula, Beatrice

    2016-05-16

    The subvalent aluminum compound [Cp*Al]4 (1) reacts with dioxygen, N2O, or sulfur to yield the heterocubane complexes [Cp*AlX]4 [X = O (2) and S (3)]. Treatment of [Cp*AlO]4 (2) with (tBuO)3SiOH gave [(tBuO)3SiOAlO]4 (6) and Cp*H. The structures and spectroscopic data of the Al clusters are supported by density functional theory (DFT) calculations, which also demonstrate the importance of noncovalent interactions (NCI) in oligomeric Al(I) complexes as well as in [Cp*AlS]4 and the heavier homologues of Se and Te. The computed (27)Al NMR shifts indicate a deshielding at the Al centers with increasing electronegativity of the chalcogen atom as well as significant spin-orbit shielding effects within the heavier heterocubane [Al4E4] cores. Further hydrolysis of 6 with an additional amount of silanol in the presence of water resulted in the formation of [Al4(OH)6(OH2)2(OSiOtBu3)6] (7), which shows a structural motif found in boehmite and diaspore.

  9. Metamotifs - a generative model for building families of nucleotide position weight matrices

    Directory of Open Access Journals (Sweden)

    Down Thomas A

    2010-06-01

    Full Text Available Abstract Background Development of high-throughput methods for measuring DNA interactions of transcription factors together with computational advances in short motif inference algorithms is expanding our understanding of transcription factor binding site motifs. The consequential growth of sequence motif data sets makes it important to systematically group and categorise regulatory motifs. It has been shown that there are familial tendencies in DNA sequence motifs that are predictive of the family of factors that binds them. Further development of methods that detect and describe familial motif trends has the potential to help in measuring the similarity of novel computational motif predictions to previously known data and sensitively detecting regulatory motifs similar to previously known ones from novel sequence. Results We propose a probabilistic model for position weight matrix (PWM sequence motif families. The model, which we call the 'metamotif' describes recurring familial patterns in a set of motifs. The metamotif framework models variation within a family of sequence motifs. It allows for simultaneous estimation of a series of independent metamotifs from input position weight matrix (PWM motif data and does not assume that all input motif columns contribute to a familial pattern. We describe an algorithm for inferring metamotifs from weight matrix data. We then demonstrate the use of the model in two practical tasks: in the Bayesian NestedMICA model inference algorithm as a PWM prior to enhance motif inference sensitivity, and in a motif classification task where motifs are labelled according to their interacting DNA binding domain. Conclusions We show that metamotifs can be used as PWM priors in the NestedMICA motif inference algorithm to dramatically increase the sensitivity to infer motifs. Metamotifs were also successfully applied to a motif classification problem where sequence motif features were used to predict the family of

  10. The Effect of Transcultural Nursing, Child Healthcare Model and Transtheoretical Model Approaches to Knowledge and Culture of Family

    Directory of Open Access Journals (Sweden)

    Kadek Ayu Erika

    2016-09-01

    Full Text Available Introduction: Urban lifestyle fueled by excessive food intake in overweight and obese children. Famili esassumethatobese children are healthy and have no health problems. Strategies to improve the knowledge and culture of the family is the approaches of TCN, CHM dan TTM. This study aims to prove the influence of TCN, CHM and TTM to knowledge and culture’s familyin controlling lifestyle of over weight and obese children. Method: This research was conducted in the areas of Biring kanaya and Tamalanrea Subdistricts, Makassar from August 2013 to March 2014. It used the Quasy Experiment design namely pre-test and post-test with control group design. Research subjects were parents of overweight or obese children in the 4th, 5th, and 6th grade of elementary school. There were 31 samples in the treatment group; and 33 samples in the control group. There were selected by using purposive sampling technique. The intervention was given for six months by providing guide books on healthy lifestyle, and visiting the families every month to give questionnaires. The measurements of children’s BMI was conducted by use WHO’s Antrho Plus software, 2007. The data were analyzed by using univariate, bivariate with Independent t-test, Mann-Whitney test and Paired t-test. Result: The results showed that there were differences in mean changes before and after the intervention, namely knowledge of the family with p=0:00 and cultural family with p=0:00. Discussion: It was concluded that the effect of TCN, CHM, and TTM could improve the knowledge and cultural family in controlling lifestyle of overweight and obese children. The importance of health education is given to families with guide books about healthy lifestyles and the impact of child obesity. Keywords: transcultural nursing theory, child health care, transtheoretical model, knowledge, cultural, family

  11. Dendritic solidification in undercooled Ni-Zr-Al melts: Experiments and modeling

    Energy Technology Data Exchange (ETDEWEB)

    Galenko, P.K., E-mail: Peter.Galenko@dlr.de [Institut fuer Materialsphysik im Weltraum, Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), D-51170 Koeln (Germany); Reutzel, S.; Herlach, D.M. [Institut fuer Materialsphysik im Weltraum, Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), D-51170 Koeln (Germany); Fries, S.G. [ICAMS, Ruhr-Universitaet Bochum, Stiepeler Strasse 129, D-44780 Bochum (Germany)] [SGF Scientific Consultancy, Arndtstr 9, D-52064 Aachen (Germany); Steinbach, I. [ICAMS, Ruhr-Universitaet Bochum, Stiepeler Strasse 129, D-44780 Bochum (Germany); Apel, M. [ACCESS eV, Intzestrasse 5, D-52072 Aachen (Germany)

    2009-12-15

    The kinetics of dendritic solidification in a ternary Ni{sub 98}Zr{sub 1}Al{sub 1} alloy is investigated experimentally in a range of melt undercoolings 40K{<=}{Delta}T{<=}320K. The growth velocity is measured for samples processed by the electromagnetic levitation technique using a high-speed video camera. With {Delta}T{<=}220K the measured growth rates are the same as those of a binary Ni{sub 99}Zr{sub 1} alloy. In the regime of rapid solidification, especially within the regime of thermal dendritic growth at {Delta}T{>=}220K, growth rates are decreased. Sharp-interface modeling predicts growth rates over the whole range of undercooling. Phase-field simulations give quantitative predictions for the dendritic growth velocity in the solute-controlled growth regime. Results show that the composition and temperature dependency of the thermodynamic data, e.g. liquidus slope and solute partition coefficient, are important for describing the alloys. Our findings give improved sharp-interface model predictions compared to calculations based on an approximation of the thermodynamic data derived from binary phase diagrams.

  12. Evaluation of properties and FEM Model of the Friction welded mild Steel-Al6061-Alumina

    Directory of Open Access Journals (Sweden)

    Hazman Seli

    2013-04-01

    Full Text Available Evaluation of mechanical and interfacial properties of friction welded alumina-mild steel rods with the use of Al6061 sheet are presented in this work. SEM, EDX analysis, hardness and bending strength tests were conducted. The bonds were attained through interfacial interlocking and intermetalllic phase formation with average bending strengths in the range of 40 to 200 MPa and insignificant hardness change in the parent alumina and mild steel. A preliminary simulation was made to predict the deformation, stress, strain and temperature distribution during the joining operation using a fully coupled thermo-mechanical FE model. The aluminum alloy metal being rubbed was simulated using a phenomenological Johnson-Cook viscoplasticity material model, which suited for materials subjected to large strains, high strain rates and high temperatures. The highest stress, strain and deformation are found to be within the heat affected zone of the weld close to the periphery rubbing surface region and correspond to the highest temperature profiles observed.

  13. Evaluation of properties and FEM Model of the Friction welded mild Steel-Al6061-Alumina

    Directory of Open Access Journals (Sweden)

    Hazman Seli

    2012-01-01

    Full Text Available Evaluation of mechanical and interfacial properties of friction welded alumina-mild steel rods with the use of Al6061 sheet are presented in this work. SEM, EDX analysis, hardness and bending strength tests were conducted. The bonds were attained through interfacial interlocking and intermetalllic phase formation with average bending strengths in the range of 40 to 200 MPa and insignificant hardness change in the parent alumina and mild steel. A preliminary simulation was made to predict the deformation, stress, strain and temperature distribution during the joining operation using a fully coupled thermo-mechanical FE model. The aluminum alloy metal being rubbed was simulated using a phenomenological Johnson-Cook viscoplasticity material model, which suited for materials subjected to large strains, high strain rates and high temperatures. The highest stress, strain and deformation are found to be within the heat affected zone of the weld close to the periphery rubbing surface region and correspond to the highest temperature profiles observed.

  14. Examination of models of knee in primary cosmic ray spectrum using gamma-hadron families

    International Nuclear Information System (INIS)

    Sveshnikova, L.G.; Managadze, A.K.; Roganova, T.M.; Mukhamedshin, R.A.

    2005-01-01

    Four models for describing the primary cosmic radiation (PCR) spectrum are proposed/ The examination of the PCR spectra models is carried out from the viewpoint of their consistency with the data on the gamma-hadron families for the threshold energies of 100 and 500 TeV. The maximum possible contribution of the superfamilies, originating from the primary nuclei, but not from the protons, is calculated [ru

  15. A Research Framework for Understanding the Practical Impact of Family Involvement in the Juvenile Justice System: The Juvenile Justice Family Involvement Model.

    Science.gov (United States)

    Walker, Sarah Cusworth; Bishop, Asia S; Pullmann, Michael D; Bauer, Grace

    2015-12-01

    Family involvement is recognized as a critical element of service planning for children's mental health, welfare and education. For the juvenile justice system, however, parents' roles in this system are complex due to youths' legal rights, public safety, a process which can legally position parents as plaintiffs, and a historical legacy of blaming parents for youth indiscretions. Three recent national surveys of juvenile justice-involved parents reveal that the current paradigm elicits feelings of stress, shame and distrust among parents and is likely leading to worse outcomes for youth, families and communities. While research on the impact of family involvement in the justice system is starting to emerge, the field currently has no organizing framework to guide a research agenda, interpret outcomes or translate findings for practitioners. We propose a research framework for family involvement that is informed by a comprehensive review and content analysis of current, published arguments for family involvement in juvenile justice along with a synthesis of family involvement efforts in other child-serving systems. In this model, family involvement is presented as an ascending, ordinal concept beginning with (1) exclusion, and moving toward climates characterized by (2) information-giving, (3) information-eliciting and (4) full, decision-making partnerships. Specific examples of how courts and facilities might align with these levels are described. Further, the model makes predictions for how involvement will impact outcomes at multiple levels with applications for other child-serving systems.

  16. Turning Simulation into Estimation: Generalized Exchange Algorithms for Exponential Family Models.

    Directory of Open Access Journals (Sweden)

    Maarten Marsman

    Full Text Available The Single Variable Exchange algorithm is based on a simple idea; any model that can be simulated can be estimated by producing draws from the posterior distribution. We build on this simple idea by framing the Exchange algorithm as a mixture of Metropolis transition kernels and propose strategies that automatically select the more efficient transition kernels. In this manner we achieve significant improvements in convergence rate and autocorrelation of the Markov chain without relying on more than being able to simulate from the model. Our focus will be on statistical models in the Exponential Family and use two simple models from educational measurement to illustrate the contribution.

  17. A model of quarks with Δ(6N2) family symmetry

    International Nuclear Information System (INIS)

    Ishimori, Hajime; King, Stephen F.

    2014-01-01

    We propose a first model of quarks based on the discrete family symmetry Δ(6N 2 ) in which the Cabibbo angle is correctly determined by a residual Z 2 ×Z 2 subgroup, and the smaller quark mixing angles may be qualitatively understood from the model. The present model of quarks may be regarded as a first step towards formulating a complete model of quarks and leptons based on Δ(6N 2 ), in which the lepton mixing matrix is fully determined by a Klein subgroup. For example, the choice N=28 provides an accurate determination of both the reactor angle and the Cabibbo angle

  18. An attempt to assess the accepted model of family in a group of Polish women

    Directory of Open Access Journals (Sweden)

    Andrzej Brodziak

    2015-03-01

    Full Text Available Introduction. The authors in their subsequent study on the causes of the fall in the birth rate, based on data obtained by means of questionnaires attempt to verify their next hypotheses, concerning low fertility, observed in most European countries. Material and methods. Data were collected by means of a set of open questions concerning the preferred model of family, and then the characteristic types of responses were identified. Also short complementary questionnaires were used by means of which we tried to assess the pessimistic attitude, low resourcefulness and lack of energy and engagement as well as the intensity of the so-called type D personality pattern. Results. The results led the authors to conclude that young people in Poland are not convinced of the benefits from any specific pattern of the family. The various possible arguments against having children or against having two children discourage easily young couples. Conclusions. The authors think that today there is no “source” of message convincing young people of the proper model of the family in Poland. Theoretically, desirable model of the family (parents + 2 children is not convincingly promoted by any sources such as parents, school, neighbours or media.

  19. Different concepts and models of information for family-relevant genetic findings: comparison and ethical analysis.

    Science.gov (United States)

    Lenk, Christian; Frommeld, Debora

    2015-08-01

    Genetic predispositions often concern not only individual persons, but also other family members. Advances in the development of genetic tests lead to a growing number of genetic diagnoses in medical practice and to an increasing importance of genetic counseling. In the present article, a number of ethical foundations and preconditions for this issue are discussed. Four different models for the handling of genetic information are presented and analyzed including a discussion of practical implications. The different models' ranges of content reach from a strictly autonomous position over self-governed arrangements in the practice of genetic counseling up to the involvement of official bodies and committees. The different models show a number of elements which seem to be very useful for the handling of genetic data in families from an ethical perspective. In contrast, the limitations of the standard medical attempt regarding confidentiality and personal autonomy in the context of genetic information in the family are described. Finally, recommendations for further ethical research and the development of genetic counseling in families are given.

  20. A family of SCFTs hosting all 'very attractive' relatives of the (2)4 Gepner model

    International Nuclear Information System (INIS)

    Wendland, Katrin

    2006-01-01

    This work gives a manual for constructing superconformal field theories associated to a family of smooth K3 surfaces. A direct method is not known, but a combination of orbifold techniques with a non-classical duality turns out to yield such models. A four parameter family of superconformal field theories associated to certain quartic K3 surfaces in CP 3 is obtained, four of whose complex structure parameters give the parameters within superconformal field theory. Standard orbifold techniques are used to construct these models, so on the level of superconformal field theory they are already well understood. All 'very attractive' K3 surfaces belong to the family of quartics underlying these theories, that is all quartic hypersurfaces in CP 3 with maximal Picard number whose defining polynomial is given by the sum of two polynomials in two variables. A particular member of the family is the (2) 4 Gepner model, such that these theories can be viewed as complex structure deformations of (2) 4 in its geometric interpretation on the Fermat quartic

  1. The effects of Re addition to the nanostructure of a Ni-Cr-Al model superalloy

    International Nuclear Information System (INIS)

    Yoon, K.E.; Seidman, D.N.; Noebe, R.D.

    2004-01-01

    Full text: The refractory elements, such as W, Mo, Ta, and Re, have been at the center of focus since the late 1970s for the development of single-crystal turbine-blades, and they have improved significantly the high-temperature properties of Ni-based superalloys. The optimum mechanical properties and operating temperature of single-crystal blades are achieved by increasing the total amounts of refractory elements. In spite of the improvement of mechanical properties of Ni-based superalloys utilizing the addition of refractory elements, their effects on the microstructure of superalloys are mostly unidentified at the subnano- to nanoscale. Rhenium (2 at.%) was added to a model ternary Ni-8.5 at.% Cr-10 at.% Al superalloy to study its effects on the temporal evolution. The temporal evolution of γ' (L1 2 ) precipitates in a Ni-Cr-AI-Re FCC alloy, aged at 1073 K from 0.25 to 264 h, is investigated by transmission-electron and three-dimensional atom-probe (3DAP) microscopies. The coarsening kinetics of γ' precipitates is investigated by measuring the mean radius, number density of precipitates and matrix supersaturation, and compared with Umantsev-Olson's (UO) coarsening theory for multicomponent alloys. The coarsening experiments do not agree with the time dependencies prediction of UO theory. The cluster-diffusion-coagulation mechanism is involved in coarsening, as well as evaporation-condenzation mechanism, and is suggested to generate discrepancy between the experiments and theory. The addition of Re reduces the lattices parameter misfit between the matrix and precipitates. Therefore, unlike other Ni-based superalloys, this Ni-Cr-AI-Re alloy does not undergo the sphere-to-cube morphological transition and maintains the spheroidal morphology of the γ' precipitates for extended aging times. In addition, the γ' precipitates do not align along [100] direction, even at the longest aging time of 264 h. Contrary to a commercial superalloy Rene N6, significant Re

  2. Modeling risks: effects of area deprivation, family socio-economic disadvantage and adverse life events on young children's psychopathology.

    Science.gov (United States)

    Flouri, Eirini; Mavroveli, Stella; Tzavidis, Nikos

    2010-06-01

    The effects of contextual risk on young children's behavior are not appropriately modeled. To model the effects of area and family contextual risk on young children's psychopathology. The final study sample consisted of 4,618 Millennium Cohort Study (MCS) children, who were 3 years old, clustered in lower layer super output areas in nine strata in the UK. Contextual risk was measured by socio-economic disadvantage (SED) at both area and family level, and by distal and proximal adverse life events at family level. Multivariate response multilevel models that allowed for correlated residuals at both individual and area level, and univariate multilevel models estimated the effect of contextual risk on specific and broad psychopathology measured by the Strengths and Difficulties Questionnaire. The area SED/broad psychopathology association remained significant after family SED was controlled, but not after maternal qualifications and family adverse life events were added to the model. Adverse life events predicted psychopathology in all models. Family SED did not predict emotional symptoms or hyperactivity after child characteristics were added to the model with the family-level controls. Area-level SED predicts child psychopathology via family characteristics; family-level SED predicts psychopathology largely by its impact on development; and adverse life events predict psychopathology independently of earlier adversity, SED and child characteristics, as well as maternal psychopathology, parenting and education.

  3. b → s transitions in family-dependent U(1)(prime) models

    International Nuclear Information System (INIS)

    Barger, V.; Everett, L.; Jiang, J.; Langacker, P.; Liu, T.; Wagner, C.E.M.

    2009-01-01

    We analyze flavor-changing-neutral-current (FCNC) effects in the b → s transitions that are induced by family non-universal U(1)(prime) gauge symmetries. After systematically developing the necessary formalism, we present a correlated analysis for the ΔB = 1,2 processes. We adopt a model-independent approach in which we only require family-universal charges for the first and second generations and small fermion mixing angles. We analyze the constraints on the resulting parameter space from B s -(bar B) mixing and the time-dependent CP asymmetries of the penguin-dominated B d → (π,φ, η(prime), ρ,ω,f0)K S decays. Our results indicate that the currently observed discrepancies in some of these modes with respect to the Standard Model predictions can be consistently accommodated within this general class of models.

  4. Family planning services for incarcerated women: models for filling an unmet need.

    Science.gov (United States)

    Sufrin, Carolyn; Baird, Sara; Clarke, Jennifer; Feldman, Elizabeth

    2017-03-13

    Purpose Incarcerated women around the globe are predominantly of reproductive age. Most of these women have been pregnant before, and many want to be sexually active and avoid pregnancy upon release. Yet few of these women are on a regular method of contraception. Providing contraceptive services for women in custody benefits individual and public health goals of reducing unintended pregnancy. This policy briefing reviews evidence for an unmet need for family planning in the correctional setting, and policy implications for expanding services. The paper aims to discuss these issues. Design/methodology/approach The authors describe four model programs in the USA with established contraceptive services on site, highlighting practical steps other facilities can implement. Findings Correctional facilities health administrators, providers, advocates, and legislators should advance policies which should counsel women on family planning and should make a range of contraceptive methods available before release, while remaining sensitive to the potential pressure these women may feel to use birth control in this unique environment. Practical implications Family planning services for incarcerated women benefits individuals, facilities, and the community. Social implications Policies which enable correctional facilities to provide comprehensive family planning to incarcerated women - including reproductive life goals counseling and contraceptive method provision - promote equity in access to critical reproductive health services and also provide broad scale population level benefits in preventing unintended pregnancy or enabling counseling for healthy pregnancies for a group of women who often have limited access to such services. Originality/value This policy briefing highlights an area of health care in prisons and jails which gets little attention in research and in policy circles: family planning services for incarcerated women. In addition to reviewing the importance of

  5. The biobehavioral family model: testing social support as an additional exogenous variable.

    Science.gov (United States)

    Woods, Sarah B; Priest, Jacob B; Roush, Tara

    2014-12-01

    This study tests the inclusion of social support as a distinct exogenous variable in the Biobehavioral Family Model (BBFM). The BBFM is a biopsychosocial approach to health that proposes that biobehavioral reactivity (anxiety and depression) mediates the relationship between family emotional climate and disease activity. Data for this study included married, English-speaking adult participants (n = 1,321; 55% female; M age = 45.2 years) from the National Comorbidity Survey Replication, a nationally representative epidemiological study of the frequency of mental disorders in the United States. Participants reported their demographics, marital functioning, social support from friends and relatives, anxiety and depression (biobehavioral reactivity), number of chronic health conditions, and number of prescription medications. Confirmatory factor analyses supported the items used in the measures of negative marital interactions, social support, and biobehavioral reactivity, as well as the use of negative marital interactions, friends' social support, and relatives' social support as distinct factors in the model. Structural equation modeling indicated a good fit of the data to the hypothesized model (χ(2)  = 846.04, p = .000, SRMR = .039, CFI = .924, TLI = .914, RMSEA = .043). Negative marital interactions predicted biobehavioral reactivity (β = .38, p social support, inversely (β = -.16, p social support as a predicting factor in the model. © 2014 Family Process Institute.

  6. Confirmatory evidence for a multidimensional model of racial-ethnic socialization for transracially adoptive families.

    Science.gov (United States)

    Langrehr, Kimberly J; Thomas, Anita Jones; Morgan, Sydney K

    2016-07-01

    The purpose of the current study is to test a recently established model of racial-ethnic socialization (Langrehr, 2014) among 2 samples of White transracially adoptive parents and to assess whether the proposed model functions similarly after accounting for adopted child race. Based on a modified version of the Racial Bias Preparation Scale (Fisher, Wallace, & Fenton, 2000), confirmatory factor analysis was used to test the 3-factor model (i.e., Prejudice Awareness, Racial-Ethnic Pride, and Egalitarianism) among 172 White transracially adoptive parents with Asian children (Mage = 45.72) and 140 White transracially adoptive parents with Black children (Mage = 42.62). In addition, multigroup invariance testing was used to assess whether the proposed model functioned similarly across the 2 groups of parents. Results indicate that the proposed 3-factor model demonstrated partial measurement invariance such that the subconstruct of Egalitarianism functioned similarly across groups, whereas Racial-Ethnic Pride and Prejudice Awareness were deemed noninvariant. Findings are intended to help expand the concept of racial-ethnic socialization for transracially adoptive families and address the degree to which current research on racial-ethnic socialization can be applied to different transracially adoptive families. Results are intended to highlight ways that various social-cultural dimensions of family can culminate into different socialization experiences. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  7. Nonradiative Transitions in Media of Different Polarities and Their Modeling for 12'-Apo-β-Caroten-12'-Al and 8'-Apo-β-Caroten-8'-Al

    Science.gov (United States)

    Pavlovich, V. S.

    2014-09-01

    The theory of nonradiative transitions, based on the model of orientational broadening of electronic levels, is used to interpret known data on the effect of the polarity of the medium and temperature on the lifetime of the S 1( A {/g -}) state for 12'-apo-β-caroten-12'-al and 8'-apo-β-caroten-8'-al. The effect of promoting vibrations on the rate constant for nonradiative transitions is considered. The results make it possible to hypothesize that the internal electric field created by the environment strongly perturbs the pigment molecules. Consequently, in the excited S 1( A {/g -}) state, both pigments exist as different conformers I and II. Their structures differ by a 180° rotation of the cyclohexene ring relative to the polyene chain. Conformer II predominates in polar media, and is found in an intramolecular charge-transfer state S 1( A {/g -}/ ICT). In addition, as a result of fluctuations in the internal electric field, it can also be found in a charge-separated state S 1( A {/g -}/ CS).

  8. Data mining of Ti-Al semi-empirical parameters for developing reduced order models

    Energy Technology Data Exchange (ETDEWEB)

    Broderick, Scott R [Department of Materials Science and Engineering and Institute for Combinatorial Discovery, Iowa State University, Ames, IA 50011 (United States); Aourag, Hafid [Department of Physics, University Abou Bakr Belkaid, Tlemcen 13000 (Algeria); Rajan, Krishna [Department of Materials Science and Engineering and Institute for Combinatorial Discovery, Iowa State University, Ames, IA 50011 (United States)

    2011-05-15

    A focus of materials design is determining the minimum amount of information necessary to fully describe a system, thus reducing the number of empirical results required and simplifying the data analysis. Screening descriptors calculated through a semi-empirical model, we demonstrate how an informatics-based analysis can be used to address this issue with no prior assumptions. We have developed a unique approach for identifying the minimum number of descriptors necessary to capture all the information of a system. Using Ti-Al alloys of varying compositions and crystal chemistries as the test bed, 5 of the 21 original descriptors from electronic structure calculations are found to capture all the information from the calculation, thereby reducing the structure-chemistry-property search space. Additionally, by combining electronic structure calculations with data mining, we classify the systems by chemistries and structures, based on the electronic structure inputs, and thereby rank the impact of change in chemistry and crystal structure on the electronic structure. -- Research Highlights: {yields} We developed an informatics-based methodology to minimize the necessary information. {yields} We applied this methodology to descriptors from semi-empirical calculations. {yields} We developed a validation approach for maintaining information from screening. {yields} We classified intermetallics and identified patterns of composition and structure.

  9. Development of a reduced model of formation reactions in Zr-Al nanolaminates

    KAUST Repository

    Vohra, Manav

    2014-12-15

    A computational model of anaerobic reactions in metallic multilayered systems with an equimolar composition of zirconium and aluminum is developed. The reduced reaction formalism of M. Salloum and O. M. Knio, Combust. Flame 157(2): 288–295 (2010) is adopted. Attention is focused on quantifying intermixing rates based on experimental measurements of uniform ignition as well as measurements of self-propagating front velocities. Estimates of atomic diffusivity are first obtained based on a regression analysis. A more elaborate Bayesian inference formalism is then applied in order to assess the impact of uncertainties in the measurements, potential discrepancies between predictions and observations, as well as the sensitivity of predictions to inferred parameters. Intermixing rates are correlated in terms of a composite Arrhenius law, which exhibits a discontinuity around the Al melting temperature. Analysis of the predictions indicates that Arrhenius parameters inferred for the low-temperature branch lie within a tight range, whereas the parameters of the high-temperature branch are characterized by higher uncertainty. The latter is affected by scatter in the experimental measurements, and the limited range of bilayers where observations are available. For both branches, the predictions exhibit higher sensitivity to the activation energy than the pre-exponent, whose posteriors are highly correlated.

  10. AC magnetic measurements of the ALS Booster Synchrotron Dipole Magnet engineering model

    International Nuclear Information System (INIS)

    Green, M.I.; Hoyer, E.; Keller, R.; Nelson, D.H.

    1988-09-01

    We made a minimal set of AC magnetic measurements of the engineering model of the ALS Booster Dipole Magnet as part of the process of qualifying its design for production. Magnetic induction integrals over paths approximating electron-beam trajectories were measured with long curved coils connected to an electronic integrator. Magnetic induction was measured with point coils and an integrator and independently with a Hall-effect Gaussmeter. These quantities, and magnet current, were displayed on a commercial digital storage oscilloscope as parametric functions of time. The displayed waveforms were stored, processed and redisplayed as representations of selected magnet parameters. A waveform representing the magnet's effective-length was created by dividing the integral waveform by the magnetic induction waveform. Waveforms of the transfer functions were produced by dividing both the integral waveform and the magnetic induction waveform by the current waveform. Pairs of matched coils, connected in series opposition, provided differential measurements of field uniformity. Quadrupole and sextupole coefficients were derived from the uniformity data. These magnet parameters were measured at 2 and 10 Hz frequencies. Together with measurements of the magnetic field at selected dc levels, the ac measurements demonstrated that the magnet design met specifications and qualified it for production. 7 refs., 7 figs., 3 tabs

  11. Data mining of Ti-Al semi-empirical parameters for developing reduced order models

    International Nuclear Information System (INIS)

    Broderick, Scott R.; Aourag, Hafid; Rajan, Krishna

    2011-01-01

    A focus of materials design is determining the minimum amount of information necessary to fully describe a system, thus reducing the number of empirical results required and simplifying the data analysis. Screening descriptors calculated through a semi-empirical model, we demonstrate how an informatics-based analysis can be used to address this issue with no prior assumptions. We have developed a unique approach for identifying the minimum number of descriptors necessary to capture all the information of a system. Using Ti-Al alloys of varying compositions and crystal chemistries as the test bed, 5 of the 21 original descriptors from electronic structure calculations are found to capture all the information from the calculation, thereby reducing the structure-chemistry-property search space. Additionally, by combining electronic structure calculations with data mining, we classify the systems by chemistries and structures, based on the electronic structure inputs, and thereby rank the impact of change in chemistry and crystal structure on the electronic structure. -- Research Highlights: → We developed an informatics-based methodology to minimize the necessary information. → We applied this methodology to descriptors from semi-empirical calculations. → We developed a validation approach for maintaining information from screening. → We classified intermetallics and identified patterns of composition and structure.

  12. Development of a reduced model of formation reactions in Zr-Al nanolaminates

    KAUST Repository

    Vohra, Manav; Winokur, Justin; Overdeep, Kyle R.; Marcello, Paul; Weihs, Timothy P.; Knio, Omar

    2014-01-01

    A computational model of anaerobic reactions in metallic multilayered systems with an equimolar composition of zirconium and aluminum is developed. The reduced reaction formalism of M. Salloum and O. M. Knio, Combust. Flame 157(2): 288–295 (2010) is adopted. Attention is focused on quantifying intermixing rates based on experimental measurements of uniform ignition as well as measurements of self-propagating front velocities. Estimates of atomic diffusivity are first obtained based on a regression analysis. A more elaborate Bayesian inference formalism is then applied in order to assess the impact of uncertainties in the measurements, potential discrepancies between predictions and observations, as well as the sensitivity of predictions to inferred parameters. Intermixing rates are correlated in terms of a composite Arrhenius law, which exhibits a discontinuity around the Al melting temperature. Analysis of the predictions indicates that Arrhenius parameters inferred for the low-temperature branch lie within a tight range, whereas the parameters of the high-temperature branch are characterized by higher uncertainty. The latter is affected by scatter in the experimental measurements, and the limited range of bilayers where observations are available. For both branches, the predictions exhibit higher sensitivity to the activation energy than the pre-exponent, whose posteriors are highly correlated.

  13. Compositional study of the Themis family

    Science.gov (United States)

    Marsset, Michael; Vernazza, Pierre; Birlan, Mirel; DeMeo, Francesca; Binzel, Richard P.; Dumas, Christophe; Milli, Julien; Popescu, Marcel

    2015-11-01

    Themis is an outer main-belt family comprising more than 4,000 dynamically well-established members (Nesvorny 2012), mainly B- and C-type asteroids (Florczak et al. 1999; Mothé-Diniz et al. 2005; Ziffer et al. 2011). This family is rather unique for a number of reasons:- It is believed to be the only main-belt family formed from the catastrophic disruption of a large (D>200 km) B-/C-type body (Brož et al. 2013). As such, it offers a unique view on the internal composition of a primitive asteroid.- Elst-Pizarro, one of the family member, was one of the first main belt comets to be discovered (Hsieh & Jewitt 2006).- 24 Themis is the first main belt asteroid for which water ice was detected at its surface (Campins et al. 2010; Rivkin & Emery 2010).- The low density values recorded for two family members (<1.3 g/cm3 , Descamps et al. 2007; Marchis et al. 2008) likely imply high fractions of ice(s) in the interior of these bodies.The last three features all point towards an ice-rich composition for the Themis parent body while showing little compatibility with a thermally metamorphosed body that has been heated throughout at temperatures exceeding 300 K. The latter interpretation was previously suggested on the basis of a similarity between the near-infrared spectral properties of heated CI/CM chondrites and those of the family members’ surfaces (Clark et al. 2010; Ziffer et al. 2011). In brief, the Themis family members appear unsampled by our meteorite collections. Recently, Vernazza et al. (2015) instead proposed that Interplanetary Dust Particles (IDPs) may be more appropriate extraterrestrial analogs for these objects’ surfaces.In the light of Vernazza et al. (2015)’s recent work, we investigated the surface mineralogy of a sample of Themis family members using a combined dataset of spectra covering the visible (Bus & Binzel 2002; Lazzaro et al. 2004), near-infrared (this work), and mid-infrared (Licandro et al. 2012; Hargrove et al. 2015) spectral ranges

  14. Relationship between Family Adaptability, Cohesion and Adolescent Problem Behaviors: Curvilinearity of Circumplex Model

    Science.gov (United States)

    Joh, Ju Youn; Kim, Sun; Park, Jun Li

    2013-01-01

    Background The Family Adaptability and Cohesion Evaluation Scale (FACES) III using the circumplex model has been widely used in investigating family function. However, the criticism of the curvilinear hypothesis of the circumplex model has always been from an empirical point of view. This study examined the relationship between adolescent adaptability, cohesion, and adolescent problem behaviors, and especially testing the consistency of the curvilinear hypotheses with FACES III. Methods We used the data from 398 adolescent participants who were in middle school. A self-reported questionnaire was used to evaluate the FACES III and Youth Self Report. Results According to the level of family adaptability, significant differences were evident in internalizing problems (P = 0.014). But, in externalizing problems, the results were not significant (P = 0.305). Also, according to the level of family cohesion, significant differences were in internalizing problems (P = 0.002) and externalizing problems (P = 0.004). Conclusion The relationship between the dimensions of adaptability, cohesion and adolescent problem behaviors was not curvilinear. In other words, adolescents with high adaptability and high cohesion showed low problem behaviors. PMID:23730484

  15. Relationship between Family Adaptability, Cohesion and Adolescent Problem Behaviors: Curvilinearity of Circumplex Model.

    Science.gov (United States)

    Joh, Ju Youn; Kim, Sun; Park, Jun Li; Kim, Yeon Pyo

    2013-05-01

    The Family Adaptability and Cohesion Evaluation Scale (FACES) III using the circumplex model has been widely used in investigating family function. However, the criticism of the curvilinear hypothesis of the circumplex model has always been from an empirical point of view. This study examined the relationship between adolescent adaptability, cohesion, and adolescent problem behaviors, and especially testing the consistency of the curvilinear hypotheses with FACES III. We used the data from 398 adolescent participants who were in middle school. A self-reported questionnaire was used to evaluate the FACES III and Youth Self Report. According to the level of family adaptability, significant differences were evident in internalizing problems (P = 0.014). But, in externalizing problems, the results were not significant (P = 0.305). Also, according to the level of family cohesion, significant differences were in internalizing problems (P = 0.002) and externalizing problems (P = 0.004). The relationship between the dimensions of adaptability, cohesion and adolescent problem behaviors was not curvilinear. In other words, adolescents with high adaptability and high cohesion showed low problem behaviors.

  16. "Her illness is a project we can work on together": developing a collaborative family-centered intervention model for newly diagnosed multiple sclerosis.

    Science.gov (United States)

    Rintell, David; Melito, Richard

    2013-01-01

    This article presents a model for intervening with families that are addressing a new diagnosis of multiple sclerosis (MS) in one member. The model is collaborative, integrative, and family-centered. It involves both working with the family collaboratively and providing strategies to promote greater collaboration within the family. The model integrates elements of crisis intervention theory, psycho-education, and family-centered approaches. The model was developed with families addressing MS, and was piloted with three families. The intervention was found to improve family members' ability to collaborate with each other. Such increased collaboration may enhance the family's ability to manage long-term illness more effectively, help the family address the impact of the illness on all family members, and generally improve the family's quality of life.

  17. Steam reforming of different biomass tar model compounds over Ni/Al_2O_3 catalysts

    International Nuclear Information System (INIS)

    Artetxe, Maite; Alvarez, Jon; Nahil, Mohamad A.; Olazar, Martin; Williams, Paul T.

    2017-01-01

    Highlights: • Order of reactivity: anisole > furfural > indene > phenol > toluene > methyl naphthalene. • Higher coke deposition for oxygenates (1.5–2.8%) than for aromatics (0.5–0.8%). • Amorphous coke is deposited for oxygenates and filamentous carbon for aromatics. • Ni content of 20 wt.% shows the higher conversion (90%) and H_2 potential (63%). - Abstract: This work focuses on the removal of the tar derived from biomass gasification by catalytic steam reforming on Ni/Al_2O_3 catalysts. Different tar model compounds (phenol, toluene, methyl naphthalene, indene, anisole and furfural) were individually steam reformed (after dissolving each one in methanol), as well as a mixture of all of them, at 700 °C under a steam/carbon (S/C) ratio of 3 and 60 min on stream. The highest conversions and H_2 potential were attained for anisole and furfural, while methyl naphthalene presented the lowest reactivity. Nevertheless, the higher reactivity of oxygenates compared to aromatic hydrocarbons promoted carbon deposition on the catalyst (in the 1.5–2.8 wt.% range). When the concentration of methanol is decreased in the feedstock and that of toluene or anisole is increased, the selectivity to CO is favoured in the gaseous products, thus increasing coke deposition on the catalyst and decreasing catalyst activity for the steam reforming reaction. Moreover, an increase in Ni loading in the catalyst from 5 to 20% enhances carbon conversion and H_2 formation in the steam reforming of a mixture of all the model compounds studied, but these values decrease for a Ni content of 40%. Coke formation also increased by increasing Ni loading, attaining its maximum value for 40% Ni (6.5 wt.%).

  18. Experimental Parametric Model for Indirect Adhesion Wear Measurement in the Dry Turning of UNS A97075 (Al-Zn Alloy

    Directory of Open Access Journals (Sweden)

    Francisco Javier Trujillo

    2017-02-01

    Full Text Available In this work, the study of the influence of cutting parameters (cutting speed, feed, and depth of cut on the tool wear used in in the dry turning of cylindrical bars of the UNS A97075 (Al-Zn alloy, has been analyzed. In addition, a study of the physicochemical mechanisms of the secondary adhesion wear has been carried out. The behavior of this alloy, from the point of view of tool wear, has been compared to similar aeronautical aluminum alloys, such as the UNS A92024 (Al-Cu alloy and UNS A97050 (Al-Zn alloy. Furthermore, a first approach to the measurement of the 2D surface of the adhered material on the rake face of the tool has been conducted. Finally, a parametric model has been developed from the experimental results. This model allows predicting the intensity of the secondary adhesion wear as a function of the cutting parameters applied.

  19. Luminescent phosphors, based on rare earth substituted oxyfluorides in the A(1)3-x A(2)xMO4F family with A(1)/A(2)=Sr, Ca, Ba and M=Al, Ga

    International Nuclear Information System (INIS)

    Park, Sangmoon; Vogt, Thomas

    2009-01-01

    A new family of UV-activated phosphors made by substituting rare-earth activators such as trivalent Eu, Tb, Tm and Er into A(1) 3-x A(2) x MO 4 F host lattices (A(1)/A(2)=Sr, Ca, Ba; M=Al, Ga) are introduced and their activation and emission spectra as well as their CIE values reported. The Tm-substituted system can be activated using light with a wavelength of 360 nm. Relative intensities of a family of Tb-substituted green phosphors activated at 254 nm and with emissions centered near 548 nm are discussed.

  20. Luminescent phosphors, based on rare earth substituted oxyfluorides in the A(1){sub 3-x} A(2){sub x}MO{sub 4}F family with A(1)/A(2)=Sr, Ca, Ba and M=Al, Ga

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sangmoon, E-mail: spark@silla.ac.k [Department of Engineering in Energy and Applied Chemistry, Silla University, Busan 617-736 (Korea, Republic of); Vogt, Thomas [NanoCenter and Department of Chemistry and Biochemistry, University of South Carolina, Columbia 29208, SC (United States)

    2009-09-15

    A new family of UV-activated phosphors made by substituting rare-earth activators such as trivalent Eu, Tb, Tm and Er into A(1){sub 3-x}A(2){sub x}MO{sub 4}F host lattices (A(1)/A(2)=Sr, Ca, Ba; M=Al, Ga) are introduced and their activation and emission spectra as well as their CIE values reported. The Tm-substituted system can be activated using light with a wavelength of 360 nm. Relative intensities of a family of Tb-substituted green phosphors activated at 254 nm and with emissions centered near 548 nm are discussed.

  1. An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior

    Science.gov (United States)

    Souza, Paul M.; Beladi, Hossein; Singh, Rajkumar P.; Hodgson, Peter D.; Rolfe, Bernard

    2018-05-01

    This paper developed high-temperature deformation constitutive models for a Ti6Al4V alloy using an empirical-based Arrhenius equation and an enhanced version of the authors' physical-based EM + Avrami equations. The initial microstructure was a partially equiaxed α + β grain structure. A wide range of experimental data was obtained from hot compression of the Ti6Al4 V alloy at deformation temperatures ranging from 720 to 970 °C, and at strain rates varying from 0.01 to 10 s-1. The friction- and adiabatic-corrected flow curves were used to identify the parameter values of the constitutive models. Both models provided good overall accuracy of the flow stress. The generalized modified Arrhenius model was better at predicting the flow stress at lower strain rates. However, the model was inaccurate in predicting the peak strain. In contrast, the enhanced physical-based EM + Avrami model revealed very good accuracy at intermediate and high strain rates, but it was also better at predicting the peak strain. Blind sample tests revealed that the EM + Avrami maintained good predictions on new (unseen) data. Thus, the enhanced EM + Avrami model may be preferred over the Arrhenius model to predict the flow behavior of Ti6Al4V alloy during industrial forgings, when the initial microstructure is partially equiaxed.

  2. Family caregiver adjustment and stroke survivor impairment: A path analytic model.

    Science.gov (United States)

    Pendergrass, Anna; Hautzinger, Martin; Elliott, Timothy R; Schilling, Oliver; Becker, Clemens; Pfeiffer, Klaus

    2017-05-01

    Depressive symptoms are a common problem among family caregivers of stroke survivors. The purpose of this study was to examine the association between care recipient's impairment and caregiver depression, and determine the possible mediating effects of caregiver negative problem-orientation, mastery, and leisure time satisfaction. The evaluated model was derived from Pearlin's stress process model of caregiver adjustment. We analyzed baseline data from 122 strained family members who were assisting stroke survivors in Germany for a minimum of 6 months and who consented to participate in a randomized clinical trial. Depressive symptoms were measured with the Center for Epidemiological Studies Depression Scale. The cross-sectional data were analyzed using path analysis. The results show an adequate fit of the model to the data, χ2(1, N = 122) = 0.17, p = .68; comparative fit index = 1.00; root mean square error of approximation: p caregiver depressive symptoms. Results indicate that caregivers at risk for depression reported a negative problem orientation, low caregiving mastery, and low leisure time satisfaction. The situation is particularly affected by the frequency of stroke survivor problematic behavior, and by the degree of their impairments in activities of daily living. The findings provide empirical support for the Pearlin's stress model and emphasize how important it is to target these mediators in health promotion interventions for family caregivers of stroke survivors. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  3. Flood analysis using HEC-RAS model: a case study for Hafr Al-Batin, Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Al-Zahrani Muhammad

    2016-01-01

    Full Text Available Hafr Al-Batin is a Saudi Arabian city located in the northeastern part of the kingdom. The city lies in the dry valley of Wadi Al-Batin, part of Wadi Al-Rummah, which leads inland towards Medina and formerly emptied into the Arabian Gulf. Hafr Al-Batin is located in an area where three valleys meet, which makes the city under high risk of flooding, especially when intense rain occurs during short duration as in the case of arid and semi-arid regions. The yearly average rainfall intensity of Hafr Al-Baten is estimated to be 125 mm. Recently, extreme rainfall events occurred, generating flood water to flow from all valleys towards the city, causing serious damage to public and private properties. In this study, HEC-HMS and HEC-RAS models are used to simulate flood occurrence in the city. The results indicate that the average flow depths within the part of the main channel passing through Hafr Al-Batin city were 3.02 m, 3.26 m, 3.45 m, 3.76 m, 4.04 m and 4.34 m for the simulated 2, 5, 10, 25, 50 and 100-year design floods, respectively. Flood hazard maps are also generated to identify the areas within the city with high risk of flooding.

  4. Early and progressive impairment of spinal blood flow-glucose metabolism coupling in motor neuron degeneration of ALS model mice.

    Science.gov (United States)

    Miyazaki, Kazunori; Masamoto, Kazuto; Morimoto, Nobutoshi; Kurata, Tomoko; Mimoto, Takahumi; Obata, Takayuki; Kanno, Iwao; Abe, Koji

    2012-03-01

    The exact mechanism of selective motor neuron death in amyotrophic lateral sclerosis (ALS) remains still unclear. In the present study, we performed in vivo capillary imaging, directly measured spinal blood flow (SBF) and glucose metabolism, and analyzed whether if a possible flow-metabolism coupling is disturbed in motor neuron degeneration of ALS model mice. In vivo capillary imaging showed progressive decrease of capillary diameter, capillary density, and red blood cell speed during the disease course. Spinal blood flow was progressively decreased in the anterior gray matter (GM) from presymptomatic stage to 0.80-fold of wild-type (WT) mice, 0.61 at early-symptomatic, and 0.49 at end stage of the disease. Local spinal glucose utilization (LSGU) was transiently increased to 1.19-fold in anterior GM at presymptomatic stage, which in turn progressively decreased to 0.84 and 0.60 at early-symptomatic and end stage of the disease. The LSGU/SBF ratio representing flow-metabolism uncoupling (FMU) preceded the sequential pathological changes in the spinal cord of ALS mice and was preferentially found in the affected region of ALS. The present study suggests that this early and progressive FMU could profoundly involve in the whole disease process as a vascular factor of ALS pathology, and could also be a potential target for therapeutic intervention of ALS.

  5. Performance evaluation of Al-Zahra academic medical center based on Iran balanced scorecard model.

    Science.gov (United States)

    Raeisi, Ahmad Reza; Yarmohammadian, Mohammad Hossein; Bakhsh, Roghayeh Mohammadi; Gangi, Hamid

    2012-01-01

    Growth and development in any country's national health system, without an efficient evaluation system, lacks the basic concepts and tools necessary for fulfilling the system's goals. The balanced scorecard (BSC) is a technique widely used to measure the performance of an organization. The basic core of the BSC is guided by the organization's vision and strategies, which are the bases for the formation of four perspectives of BSC. The goal of this research is the performance evaluation of Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences, based on Iran BSC model. This is a combination (quantitative-qualitative) research which was done at Al-Zahra Academic Medical Center in Isfahan University of Medical Sciences in 2011. The research populations were hospital managers at different levels. Sampling method was purposive sampling in which the key informed personnel participated in determining the performance indicators of hospital as the BSC team members in focused discussion groups. After determining the conceptual elements in focused discussion groups, the performance objectives (targets) and indicators of hospital were determined and sorted in perspectives by the group discussion participants. Following that, the performance indicators were calculated by the experts according to the predetermined objectives; then, the score of each indicator and the mean score of each perspective were calculated. Research findings included development of the organizational mission, vision, values, objectives, and strategies. The strategies agreed upon by the participants in the focus discussion group included five strategies, which were customer satisfaction, continuous quality improvement, development of human resources, supporting innovation, expansion of services and improving the productivity. Research participants also agreed upon four perspectives for the Al-Zahra hospital BSC. In the patients and community perspective (customer), two objectives and

  6. Evidence of compromised blood-spinal cord barrier in early and late symptomatic SOD1 mice modeling ALS.

    Directory of Open Access Journals (Sweden)

    Svitlana Garbuzova-Davis

    2007-11-01

    Full Text Available The blood-brain barrier (BBB, blood-spinal cord barrier (BSCB, and blood-cerebrospinal fluid barrier (BCSFB control cerebral/spinal cord homeostasis by selective transport of molecules and cells from the systemic compartment. In the spinal cord and brain of both ALS patients and animal models, infiltration of T-cell lymphocytes, monocyte-derived macrophages and dendritic cells, and IgG deposits have been observed that may have a critical role in motor neuron damage. Additionally, increased levels of albumin and IgG have been found in the cerebrospinal fluid in ALS patients. These findings suggest altered barrier permeability in ALS. Recently, we showed disruption of the BBB and BSCB in areas of motor neuron degeneration in the brain and spinal cord in G93A SOD1 mice modeling ALS at both early and late stages of disease using electron microscopy. Examination of capillary ultrastructure revealed endothelial cell degeneration, which, along with astrocyte alteration, compromised the BBB and BSCB. However, the effect of these alterations upon barrier function in ALS is still unclear. The aim of this study was to determine the functional competence of the BSCB in G93A mice at different stages of disease.Evans Blue (EB dye was intravenously injected into ALS mice at early or late stage disease. Vascular leakage and the condition of basement membranes, endothelial cells, and astrocytes were investigated in cervical and lumbar spinal cords using immunohistochemistry. Results showed EB leakage in spinal cord microvessels from all G93A mice, indicating dysfunction in endothelia and basement membranes and confirming our previous ultrastructural findings on BSCB disruption. Additionally, downregulation of Glut-1 and CD146 expressions in the endothelial cells of the BSCB were found which may relate to vascular leakage.Results suggest that the BSCB is compromised in areas of motor neuron degeneration in ALS mice at both early and late stages of the disease.

  7. PARAMETRIC DISTRIBUTION FAMILIES USEFUL FOR MODELLING NON - LIFE INSURANCE PAYMENTS DATA. TAIL BEHAVIOUR

    Directory of Open Access Journals (Sweden)

    Sandra Teodorescu

    2013-11-01

    Full Text Available The present paper describes a series of parametric distributions used for modeling non-life insurance payments data.Of those listed, special attention is paid to the transformed Beta distribution family.This distribution as well as those which are obtained from it(special cases of four-parameter transformed Beta distribution are used in the modeling of high costs, or even extreme ones.In the literature it follows the tail behaviour of distributions depending on the parameters, because the insurance payments data are tipically highly positively skewed and distributed with large upper tails.In the paper is described the tail behavior of the distribution in the left and right side respectively, and deduced from it, a general case.There are also some graphs of probability density function for one of the transformed Beta family members, which comes to reinforce the comments made.

  8. Modelling of AlAs/GaAs interfacial structures using high-angle annular dark field (HAADF) image simulations.

    Science.gov (United States)

    Robb, Paul D; Finnie, Michael; Craven, Alan J

    2012-07-01

    High angle annular dark field (HAADF) image simulations were performed on a series of AlAs/GaAs interfacial models using the frozen-phonon multislice method. Three general types of models were considered-perfect, vicinal/sawtooth and diffusion. These were chosen to demonstrate how HAADF image measurements are influenced by different interfacial structures in the technologically important III-V semiconductor system. For each model, interfacial sharpness was calculated as a function of depth and compared to aberration-corrected HAADF experiments of two types of AlAs/GaAs interfaces. The results show that the sharpness measured from HAADF imaging changes in a complicated manner with thickness for complex interfacial structures. For vicinal structures, it was revealed that the type of material that the probe projects through first of all has a significant effect on the measured sharpness. An increase in the vicinal angle was also shown to generate a wider interface in the random step model. The Moison diffusion model produced an increase in the interface width with depth which closely matched the experimental results of the AlAs-on-GaAs interface. In contrast, the interface width decreased as a function of depth in the linear diffusion model. Only in the case of the perfect model was it possible to ascertain the underlying structure directly from HAADF image analysis. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. Profiling Fast Healthcare Interoperability Resources (FHIR) of Family Health History based on the Clinical Element Models

    OpenAIRE

    Lee, Jaehoon; Hulse, Nathan C.; Wood, Grant M.; Oniki, Thomas A.; Huff, Stanley M.

    2017-01-01

    In this study we developed a Fast Healthcare Interoperability Resources (FHIR) profile to support exchanging a full pedigree based family health history (FHH) information across multiple systems and applications used by clinicians, patients, and researchers. We used previously developed clinical element models (CEMs) that are capable of representing the FHH information, and derived essential data elements including attributes, constraints, and value sets. We analyzed gaps between the FHH CEM ...

  10. The family working time model: Toward more gender equality in work and care

    OpenAIRE

    Müller, Kai-Uwe; Neumann, Michael; Wrohlich, Katharina

    2016-01-01

    Since the millennium, the labor market participation of women and mothers is increasing across European countries. Several work/care policy measures underlie this evolution. At the same time, the labor market behavior of men and fathers, as well as their involvement in care work, is relatively unchanging, meaning that employed mothers are facing an increased burden with respect to gainful employment and providing care. We propose a family working time model that incentivizes fathers and mothe...

  11. Selecting elephant grass families and progenies to produce bioenergy through mixed models (REML/BLUP).

    Science.gov (United States)

    Rodrigues, E V; Daher, R F; Dos Santos, A; Vivas, M; Machado, J C; Gravina, G do A; de Souza, Y P; Vidal, A K; Rocha, A Dos S; Freitas, R S

    2017-05-18

    Brazil has great potential to produce bioenergy since it is located in a tropical region that receives high incidence of solar energy and presents favorable climatic conditions for such purpose. However, the use of bioenergy in the country is below its productivity potential. The aim of the current study was to select full-sib progenies and families of elephant grass (Pennisetum purpureum S.) to optimize phenotypes relevant to bioenergy production through mixed models (REML/BLUP). The circulating diallel-based crossing of ten elephant grass genotypes was performed. An experimental design using the randomized block methodology, with three repetitions, was set to assess both the hybrids and the parents. Each plot comprised 14-m rows, 1.40 m spacing between rows, and 1.40 m spacing between plants. The number of tillers, plant height, culm diameter, fresh biomass production, dry biomass rate, and the dry biomass production were assessed. Genetic-statistical analyses were performed through mixed models (REML/BLUP). The genetic variance in the assessed families was explained through additive genetic effects and dominance genetic effects; the dominance variance was prevalent. Families such as Capim Cana D'África x Guaçu/I.Z.2, Cameroon x Cuba-115, CPAC x Cuba-115, Cameroon x Guaçu/I.Z.2, and IAC-Campinas x CPAC showed the highest dry biomass production. The family derived from the crossing between Cana D'África and Guaçu/I.Z.2 showed the largest number of potential individuals for traits such as plant height, culm diameter, fresh biomass production, dry biomass production, and dry biomass rate. The individual 5 in the family Cana D'África x Guaçu/I.Z.2, planted in blocks 1 and 2, showed the highest dry biomass production.

  12. Ab initio modeling of Al adsorption on CaF2 surfaces

    International Nuclear Information System (INIS)

    Barzilai, S.; Argaman, N.; Froumin, N.; Fuks, D.; Frage, N.

    2008-01-01

    Ab initio simulations of the adsorption of Al atoms on CaF 2 (0 0 1) and (1 1 1) surfaces have been performed for supercells with 7 different atomic configurations, using density functional theory. For (1 1 1) surfaces, a repulsive interaction was observed for most configurations, while a weak attraction was obtained when the Al atom was placed above F atoms. For the Ca-terminated (0 0 1) surface, the adsorption energy was about 5 times larger, whereas for the F-terminated (0 0 1) surface it was about 20 times greater. The comparative analysis indicates that the (0 0 1) surfaces are reactive and have a strong Al adatom bonding (chemisorption), especially for the F-terminated substrate. On the contrary, the (1 1 1) plane may be considered as non-reactive (physisorption), having a weak bonding of the Al adatom above the F site

  13. COMPARATIVE MODELLING AND LIGAND BINDING SITE PREDICTION OF A FAMILY 43 GLYCOSIDE HYDROLASE FROM Clostridium thermocellum

    Directory of Open Access Journals (Sweden)

    Shadab Ahmed

    2012-06-01

    Full Text Available The phylogenetic analysis of Clostridium thermocellum family 43 glycoside hydrolase (CtGH43 showed close evolutionary relation with carbohydrate binding family 6 proteins from C. cellulolyticum, C. papyrosolvens, C. cellulyticum, and A. cellulyticum. Comparative modeling of CtGH43 was performed based on crystal structures with PDB IDs 3C7F, 1YIF, 1YRZ, 2EXH and 1WL7. The structure having lowest MODELLER objective function was selected. The three-dimensional structure revealed typical 5-fold beta–propeller architecture. Energy minimization and validation of predicted model with VERIFY 3D indicated acceptability of the proposed atomic structure. The Ramachandran plot analysis by RAMPAGE confirmed that family 43 glycoside hydrolase (CtGH43 contains little or negligible segments of helices. It also showed that out of 301 residues, 267 (89.3% were in most favoured region, 23 (7.7% were in allowed region and 9 (3.0% were in outlier region. IUPred analysis of CtGH43 showed no disordered region. Active site analysis showed presence of two Asp and one Glu, assumed to form a catalytic triad. This study gives us information about three-dimensional structure and reaffirms the fact that it has the similar core 5-fold beta–propeller architecture and so probably has the same inverting mechanism of action with the formation of above mentioned catalytic triad for catalysis of polysaccharides.

  14. Modeling and Simulation of Monolithic AlGaAs/InGaAs Tandem Solar Cell

    Directory of Open Access Journals (Sweden)

    Samia SLIMANI

    2015-06-01

    Full Text Available Employing conventional III-V junctions we report a classical calculation of conduction and valence band edge and the electron and hole densities. It is shown that the optimum performance can be achieved by employing AlGaAs /AlGaAs/InGaAs monolithic cascade solar cells, we have established these calculations by solving the Poisson equation within the framework of the Nextnano.

  15. Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy.

    Science.gov (United States)

    Kabir, Mohammad Rizviul; Richter, Henning

    2017-02-08

    A selective laser melting (SLM)-based, additively-manufactured Ti-6Al-4V alloy is prone to the accumulation of undesirable defects during layer-by-layer material build-up. Defects in the form of complex-shaped pores are one of the critical issues that need to be considered during the processing of this alloy. Depending on the process parameters, pores with concave or convex boundaries may occur. To exploit the full potential of additively-manufactured Ti-6Al-4V, the interdependency between the process parameters, pore morphology, and resultant mechanical properties, needs to be understood. By incorporating morphological details into numerical models for micromechanical analyses, an in-depth understanding of how these pores interact with the Ti-6Al-4V microstructure can be gained. However, available models for pore analysis lack a realistic description of both the Ti-6Al-4V grain microstructure, and the pore geometry. To overcome this, we propose a comprehensive approach for modeling and discretizing pores with complex geometry, situated in a polycrystalline microstructure. In this approach, the polycrystalline microstructure is modeled by means of Voronoi tessellations, and the complex pore geometry is approximated by strategically combining overlapping spheres of varied sizes. The proposed approach provides an elegant way to model the microstructure of SLM-processed Ti-6Al-4V containing pores or crack-like voids, and makes it possible to investigate the relationship between process parameters, pore morphology, and resultant mechanical properties in a finite-element-based simulation framework.

  16. Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy

    Directory of Open Access Journals (Sweden)

    Mohammad Rizviul Kabir

    2017-02-01

    Full Text Available A selective laser melting (SLM-based, additively-manufactured Ti-6Al-4V alloy is prone to the accumulation of undesirable defects during layer-by-layer material build-up. Defects in the form of complex-shaped pores are one of the critical issues that need to be considered during the processing of this alloy. Depending on the process parameters, pores with concave or convex boundaries may occur. To exploit the full potential of additively-manufactured Ti-6Al-4V, the interdependency between the process parameters, pore morphology, and resultant mechanical properties, needs to be understood. By incorporating morphological details into numerical models for micromechanical analyses, an in-depth understanding of how these pores interact with the Ti-6Al-4V microstructure can be gained. However, available models for pore analysis lack a realistic description of both the Ti-6Al-4V grain microstructure, and the pore geometry. To overcome this, we propose a comprehensive approach for modeling and discretizing pores with complex geometry, situated in a polycrystalline microstructure. In this approach, the polycrystalline microstructure is modeled by means of Voronoi tessellations, and the complex pore geometry is approximated by strategically combining overlapping spheres of varied sizes. The proposed approach provides an elegant way to model the microstructure of SLM-processed Ti-6Al-4V containing pores or crack-like voids, and makes it possible to investigate the relationship between process parameters, pore morphology, and resultant mechanical properties in a finite-element-based simulation framework.

  17. Analysis of the main dosimetric peak of Al2O3:C compounds with a model of interacting traps

    International Nuclear Information System (INIS)

    Ortega, F.; Marcazzó, J.; Molina, P.; Santiago, M.; Lester, M.; Henniger, J.; Caselli, E.

    2013-01-01

    The glow curve of Al 2 O 3 :C compounds has been analyzed by employing a model consisting of two active traps, thermally disconnected traps and one recombination centre. The analysis takes into account interaction among traps and the thermal quenching of the thermoluminescent emission. - Highlights: • Glow curves of Al 2 O 3 :C for two doses have been analysed taking into account interactions among traps. • The system of differential equations describing the kinetics has been uncoupled. • The new system of equations takes into account equations without derivatives. • The algorithm used will not become stiff. • The kinetics parameters obtained do not depend on the dose

  18. Family Caregiver Alliance

    Science.gov (United States)

    ... on your schedule. Look for our launch soon! FAMILY CARE NAVIGATOR ─ Click on Your State AL AK ... AiA18 Smart Patients Caregivers Community In partnership with Family Caregiver Alliance Learn more Caregiver Research Studies show ...

  19. Feasibility and potential efficacy of the family-centered Prevent-Teach-Reinforce model with families of children with developmental disorders.

    Science.gov (United States)

    Bailey, Kathleen M; Blair, Kwang-Sun Cho

    2015-12-01

    This study examined the feasibility and potential efficacy of the family-centered Prevent-Teach-Reinforce (PTR) model with three families of young children with an autism spectrum disorder or language delay with sensory processing problems. Particularly, the study assessed the family adherence to the PTR intervention, changes in child behavior, family use of the Individualized Behavior Rating Scale Tool (IBRST), procedural integrity, and social validity. A multiple-baseline design across families was used to examine the functional relation between parent-implemented PTR intervention and changes in child behavior. Results indicated that the family-centered PTR process was successful in promoting parents to design and implement the PTR intervention plans with fidelity, and the parents' implemented intervention plans were effective in increasing replacement behavior and decreasing problem behavior across children. The results also indicated that the parents successfully used the IBRST to monitor their child's progress and were highly satisfied with the PTR intervention process and outcomes for their children. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification

    Science.gov (United States)

    Tiwary, C. S.; Chakraborty, S.; Mahapatra, D. R.; Chattopadhyay, K.

    2014-05-01

    This paper attempts to gain an understanding of the effect of lamellar length scale on the mechanical properties of two-phase metal-intermetallic eutectic structure. We first develop a molecular dynamics model for the in-situ grown eutectic interface followed by a model of deformation of Al-Al2Cu lamellar eutectic. Leveraging the insights obtained from the simulation on the behaviour of dislocations at different length scales of the eutectic, we present and explain the experimental results on Al-Al2Cu eutectic with various different lamellar spacing. The physics behind the mechanism is further quantified with help of atomic level energy model for different length scale as well as different strain. An atomic level energy partitioning of the lamellae and the interface regions reveals that the energy of the lamellae core are accumulated more due to dislocations irrespective of the length-scale. Whereas the energy of the interface is accumulated more due to dislocations when the length-scale is smaller, but the trend is reversed when the length-scale is large beyond a critical size of about 80 nm.

  1. Comment on "Can assimilation of crowdsourced data in hydrological modelling improve flood prediction?" by Mazzoleni et al. (2017)

    Science.gov (United States)

    Viero, Daniele P.

    2018-01-01

    Citizen science and crowdsourcing are gaining increasing attention among hydrologists. In a recent contribution, Mazzoleni et al. (2017) investigated the integration of crowdsourced data (CSD) into hydrological models to improve the accuracy of real-time flood forecasts. The authors used synthetic CSD (i.e. not actually measured), because real CSD were not available at the time of the study. In their work, which is a proof-of-concept study, Mazzoleni et al. (2017) showed that assimilation of CSD improves the overall model performance; the impact of irregular frequency of available CSD, and that of data uncertainty, were also deeply assessed. However, the use of synthetic CSD in conjunction with (semi-)distributed hydrological models deserves further discussion. As a result of equifinality, poor model identifiability, and deficiencies in model structure, internal states of (semi-)distributed models can hardly mimic the actual states of complex systems away from calibration points. Accordingly, the use of synthetic CSD that are drawn from model internal states under best-fit conditions can lead to overestimation of the effectiveness of CSD assimilation in improving flood prediction. Operational flood forecasting, which results in decisions of high societal value, requires robust knowledge of the model behaviour and an in-depth assessment of both model structure and forcing data. Additional guidelines are given that are useful for the a priori evaluation of CSD for real-time flood forecasting and, hopefully, for planning apt design strategies for both model calibration and collection of CSD.

  2. On the Path to Optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti High Entropy Alloy Family for High Temperature Applications

    Directory of Open Access Journals (Sweden)

    Anna M. Manzoni

    2016-03-01

    Full Text Available The most commonly investigated high entropy alloy, AlCoCrCuFeNi, has been chosen for optimization of its microstructural and mechanical properties by means of compositional changes and heat treatments. Among the different available optimization paths, the decrease of segregating element Cu, the increase of oxidation protective elements Al and Cr and the approach towards a γ-γ′ microstructure like in Ni-based superalloys have been probed and compared. Microscopical observations have been made for every optimization step. Vickers microhardness measurements and/or tensile/compression test have been carried out when the alloy was appropriate. Five derived alloys AlCoCrFeNi, Al23Co15Cr23Cu8Fe15Ni16, Al8Co17Cr17Cu8Fe17Ni33, Al8Co17Cr14Cu8Fe17Ni34.8Mo0.1Ti1W0.1 and Al10Co25Cr8Fe15Ni36Ti6 (all at.% have been compared to the original AlCoCrCuFeNi and the most promising one has been selected for further investigation.

  3. EGFR inhibitor erlotinib delays disease progression but does not extend survival in the SOD1 mouse model of ALS.

    Directory of Open Access Journals (Sweden)

    Claire E Le Pichon

    Full Text Available Amyotrophic lateral sclerosis (ALS is a fatal neurodegenerative disease that causes progressive paralysis due to motor neuron death. Several lines of published evidence suggested that inhibition of epidermal growth factor receptor (EGFR signaling might protect neurons from degeneration. To test this hypothesis in vivo, we treated the SOD1 transgenic mouse model of ALS with erlotinib, an EGFR inhibitor clinically approved for oncology indications. Although erlotinib failed to extend ALS mouse survival it did provide a modest but significant delay in the onset of multiple behavioral measures of disease progression. However, given the lack of protection of motor neuron synapses and the lack of survival extension, the small benefits observed after erlotinib treatment appear purely symptomatic, with no modification of disease course.

  4. A new social-family model for eating disorders: A European multicentre project using a case-control design.

    Science.gov (United States)

    Krug, Isabel; Fuller-Tyszkiewicz, Matthew; Anderluh, Marija; Bellodi, Laura; Bagnoli, Silvia; Collier, David; Fernandez-Aranda, Fernando; Karwautz, Andreas; Mitchell, Sarah; Nacmias, Benedetta; Ricca, Valdo; Sorbi, Sandro; Tchanuria, Kate; Wagner, Gudrun; Treasure, Janet; Micali, Nadia

    2015-12-01

    To examine a new socio-family risk model of Eating Disorders (EDs) using path-analyses. The sample comprised 1264 (ED patients = 653; Healthy Controls = 611) participants, recruited into a multicentre European project. Socio-family factors assessed included: perceived maternal and parental parenting styles, family, peer and media influences, and body dissatisfaction. Two types of path-analyses were run to assess the socio-family model: 1.) a multinomial logistic path-model including ED sub-types [Anorexia Nervosa-Restrictive (AN-R), AN-Binge-Purging (AN-BP), Bulimia Nervosa (BN) and EDNOS)] as the key polychotomous categorical outcome and 2.) a path-model assessing whether the socio-family model differed across ED sub-types and healthy controls using body dissatisfaction as the outcome variable. The first path-analyses suggested that family and media (but not peers) were directly and indirectly associated (through body dissatisfaction) with all ED sub-types. There was a weak effect of perceived parenting directly on ED sub-types and indirectly through family influences and body dissatisfaction. For the second path-analyses, the socio-family model varied substantially across ED sub-types. Family and media influences were related to body dissatisfaction in the EDNOS and control sample, whereas perceived abusive parenting was related to AN-BP and BN. This is the first study providing support for this new socio-family model, which differed across ED sub-types. This suggests that prevention and early intervention might need to be tailored to diagnosis-specific ED profiles. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Global regularity for a family of 3D models of the axi-symmetric Navier–Stokes equations

    Science.gov (United States)

    Hou, Thomas Y.; Liu, Pengfei; Wang, Fei

    2018-05-01

    We consider a family of three-dimensional models for the axi-symmetric incompressible Navier–Stokes equations. The models are derived by changing the strength of the convection terms in the axisymmetric Navier–Stokes equations written using a set of transformed variables. We prove the global regularity of the family of models in the case that the strength of convection is slightly stronger than that of the original Navier–Stokes equations, which demonstrates the potential stabilizing effect of convection.

  6. Microwave-assisted combustion synthesis of NiAl intermetallics in a single mode applicator: Modeling and optimisation

    International Nuclear Information System (INIS)

    Poli, G.; Sola, R.; Veronesi, P.

    2006-01-01

    The microwave-assisted combustion synthesis of NiAl intermetallics in a single mode applicator has been simulated numerically and performed with the aim of achieving the highest yields, energy efficiency and process reproducibility. The electromagnetic field modeling of the microwave system allowed to chose the proper experimental set-up and the materials more suitable for the application, minimising the reflected power and the risks of arcing. In all the experimental conditions tested, conversions of 3-5 g 1:1 atomic ratio Ni and Al powder compacts into NiAl ranged from 98.7% to 100%, requiring from 30 to 180 s with power from 500 to 1500 W. The optimisation procedure allowed to determine and quantify the effects of the main process variables on the ignition time, the NiAl yields and the specific energy consumption, leading to a fast, reproducible and cost-effective process of microwave-assisted combustion synthesis of NiAl intermetallics

  7. Analytical modeling and simulation of subthreshold behavior in nanoscale dual material gate AlGaN/GaN HEMT

    Science.gov (United States)

    Kumar, Sona P.; Agrawal, Anju; Chaujar, Rishu; Gupta, Mridula; Gupta, R. S.

    2008-07-01

    A two-dimensional (2-D) analytical model for a Dual Material Gate (DMG) AlGaN/GaN High Electron Mobility Transistor (HEMT) has been developed to demonstrate the unique attributes of this device structure in suppressing short channel effects (SCEs). The model accurately predicts the channel potential, electric field variation along the channel, and sub-threshold drain current, taking into account the effect of lengths of the two gate metals, their work functions, barrier layer thicknesses, and applied drain biases. It is seen that the SCEs and hot carrier effects in DMG AlGaN/GaN HEMT are suppressed due to the work function difference of the two metal gates, thereby screening the drain potential variations by the gate near the drain. Besides, a more uniform electric field along the channel leads to improved carrier transport efficiency. The accuracy of the results obtained from our analytical model has been verified using ATLAS device simulations.

  8. INTERNAL REGULATIONS OF INTERNATIONAL COMPANIES OPERATING IN POLAND AND TRADITIONAL FAMILY MODEL

    Directory of Open Access Journals (Sweden)

    Chojara-Sobiecka Małgorzata

    2017-12-01

    Full Text Available Most of the big companies have the internal regulations about human resources management. The bylaws in question are usually created in the reality of a particular legal system. When a company expands abroad, it starts operating in a different legal system than its own. As a result, the bylaws are not always compatible neither with laws nor the legal culture of the state of a new market. The paper touches upon the problem of the cohesion of internal regulations of some of the international companies operating in Poland with the traditional family model established in Polish law analyzing three areas such as: supporting parenting, family business, and preference for non-heterosexual persons. The conclusions are that some of the internal regulations are not coherent with Polish law, and some of the bylaws regarding, e.g., daycare or flexible working hours, can be adapted to Polish legal system. It (unclear what “it” is referring to would benefit traditional model of the family. The paper contains also the excursus about some legis-lative phenomenon regarding the reception of state law regulations issues by private companies and pos-tulates that the Polish legislator shall be open to new ideas in this matter and search for the well-tried regulations.

  9. An Efficient Test for Gene-Environment Interaction in Generalized Linear Mixed Models with Family Data.

    Science.gov (United States)

    Mazo Lopera, Mauricio A; Coombes, Brandon J; de Andrade, Mariza

    2017-09-27

    Gene-environment (GE) interaction has important implications in the etiology of complex diseases that are caused by a combination of genetic factors and environment variables. Several authors have developed GE analysis in the context of independent subjects or longitudinal data using a gene-set. In this paper, we propose to analyze GE interaction for discrete and continuous phenotypes in family studies by incorporating the relatedness among the relatives for each family into a generalized linear mixed model (GLMM) and by using a gene-based variance component test. In addition, we deal with collinearity problems arising from linkage disequilibrium among single nucleotide polymorphisms (SNPs) by considering their coefficients as random effects under the null model estimation. We show that the best linear unbiased predictor (BLUP) of such random effects in the GLMM is equivalent to the ridge regression estimator. This equivalence provides a simple method to estimate the ridge penalty parameter in comparison to other computationally-demanding estimation approaches based on cross-validation schemes. We evaluated the proposed test using simulation studies and applied it to real data from the Baependi Heart Study consisting of 76 families. Using our approach, we identified an interaction between BMI and the Peroxisome Proliferator Activated Receptor Gamma ( PPARG ) gene associated with diabetes.

  10. Family influences on mania-relevant cognitions and beliefs: a cognitive model of mania and reward.

    Science.gov (United States)

    Chen, Stephen H; Johnson, Sheri L

    2012-07-01

    The present study proposed and tested a cognitive model of mania and reward. Undergraduates (N = 284; 68.4% female; mean age = 20.99 years, standard deviation ± 3.37) completed measures of family goal setting and achievement values, personal reward-related beliefs, cognitive symptoms of mania, and risk for mania. Correlational analyses and structural equation modeling supported two distinct, but related facets of mania-relevant cognition: stably present reward-related beliefs and state-dependent cognitive symptoms in response to success and positive emotion. Results also indicated that family emphasis on achievement and highly ambitious extrinsic goals were associated with these mania-relevant cognitions. Finally, controlling for other factors, cognitive symptoms in response to success and positive emotion were uniquely associated with lifetime propensity towards mania symptoms. Results support the merit of distinguishing between facets of mania-relevant cognition and the importance of the family in shaping both aspects of cognition. © 2012 Wiley Periodicals, Inc.

  11. Children's health care assistance according to their families: a comparison between models of Primary Care

    Directory of Open Access Journals (Sweden)

    Vanessa Bertoglio Comassetto Antunes de Oliveira

    2015-02-01

    Full Text Available OBJECTIVE To compare the health assistance models of Basic Traditional Units (UBS with the Family Health Strategy (ESF units for presence and extent of attributes of Primary Health Care (APS, specifically in the care of children. METHOD A cross-sectional study of a quantitative approach with families of children attended by the Public Health Service of Colombo, Paraná. The Primary Care Assessment Tool (PCA-Tool was applied to parents of 482 children, 235 ESF units and 247 UBS units covering all primary care units of the municipality, between June and July 2012. The results were analyzed according to the PCA-Tool manual. RESULTS ESF units reached a borderline overall score for primary health care standards. However, they fared better in their attributes of Affiliation, Integration of care coordination, Comprehensiveness, Family Centeredness and Accessibility of use, while the attributes of Community Guidance/Orientation, Coordination of Information Systems, Longitudinality and Access attributes were rated as insufficient for APS. UBS units had low scores on all attributes. CONCLUSION The ESF units are closer to the principles of APS (Primary Health Care, but there is need to review actions of child care aimed at the attributes of APS in both care models, corroborating similar studies from other regions of Brazil.

  12. Profiling Fast Healthcare Interoperability Resources (FHIR) of Family Health History based on the Clinical Element Models.

    Science.gov (United States)

    Lee, Jaehoon; Hulse, Nathan C; Wood, Grant M; Oniki, Thomas A; Huff, Stanley M

    2016-01-01

    In this study we developed a Fast Healthcare Interoperability Resources (FHIR) profile to support exchanging a full pedigree based family health history (FHH) information across multiple systems and applications used by clinicians, patients, and researchers. We used previously developed clinical element models (CEMs) that are capable of representing the FHH information, and derived essential data elements including attributes, constraints, and value sets. We analyzed gaps between the FHH CEM elements and existing FHIR resources. Based on the analysis, we developed a profile that consists of 1) FHIR resources for essential FHH data elements, 2) extensions for additional elements that were not covered by the resources, and 3) a structured definition to integrate patient and family member information in a FHIR message. We implemented the profile using an open-source based FHIR framework and validated it using patient-entered FHH data that was captured through a locally developed FHH tool.

  13. A simulation model for the determination of tabarru' rate in a family takaful

    Science.gov (United States)

    Ismail, Hamizun bin

    2014-06-01

    The concept of tabarru' that is incorporated in family takaful serves to eliminate the element of uncertainty in the contract as a participant agree to relinquish as donation certain portion of his contribution. The most important feature in family takaful is that it does not guarantee a definite return on a participant's contribution, unlike its conventional counterpart where a premium is paid in return for a guaranteed amount of insurance benefit. In other words, investment return on contributed funds by the participants are based on actual investment experience. The objective of this study is to set up a framework for the determination of tabarru' rate by simulation. The model is based on binomial death process. Specifically, linear tabarru' rate and flat tabarru' rate are introduced. The results of the simulation trials show that the linear assumption on the tabarru' rate has an advantage over the flat counterpart as far as the risk of the investment accumulation on maturity is concerned.

  14. The family name Solimonadaceae Losey et al. 2013 is illegitimate, proposals to create the names 'Sinobacter soli' comb. nov. and 'Sinobacter variicoloris' contravene the Code, the family name Xanthomonadaceae Saddler and Bradbury 2005 and the order name Xanthomonadales Saddler and Bradbury 2005 are illegitimate and notes on the application of the family names Solibacteraceae Zhou et al. 2008, Nevskiaceae Henrici and Johnson 1935 (Approved Lists 1980) and Lysobacteraceae Christensen and Cook 1978 (Approved Lists 1980) and order name Lysobacteriales Christensen and Cook 1978 (Approved Lists 1980) with respect to the classification of the corresponding type genera Solibacter Zhou et al. 2008, Nevskia Famintzin 1892 (Approved Lists 1980) and Lysobacter Christensen and Cook 1978 (Approved Lists 1980) and importance of accurately expressing the link between a taxonomic name, its authors and the corresponding description/circumscription/emendation.

    Science.gov (United States)

    Tindall, B J

    2014-01-01

    In a recent publication the name Solimonadaceae Losey et al. 2013 has been proposed as a replacement name for the family name Sinobacteraceae Zhou et al. 2008. This course of action contravenes the current Code governing the nomenclature of prokaryotes, making Solimonadaceae Losey et al. 2013 an illegitimate name that neither has claim to priority nor can be used as a correct name. Closer examination of publications dealing with the taxonomy of members of the genera Solimonas and Sinobacter and the placement of these taxa at the rank of family and order reveal problems associated with the application of the family names Sinobacteraceae Zhou et al. 2008, Nevskiaceae Henrici and Johnson 1935 (Approved Lists 1980) and Lysobacteraceae Christensen and Cook 1978 (Approved Lists 1980) and the order names Lysobacterales Christensen and Cook 1978 (Approved Lists 1980) and Xanthomonadales Saddler and Bradbury 2005.

  15. The Maudsley Model of Family-Based Treatment for Anorexia Nervosa: A Qualitative Evaluation of Parent-to-Parent Consultation

    Science.gov (United States)

    Rhodes, Paul; Brown, Jac; Madden, Sloane

    2009-01-01

    This article describes the qualitative analysis of a randomized control trial that explores the use of parent-to-parent consultations as an augmentation to the Maudsley model of family-based treatment for anorexia. Twenty families were randomized into two groups, 10 receiving standard treatment and 10 receiving an additional parent-to-parent…

  16. Integrative Module-Based Family Therapy: A Model for Training and Treatment in a Multidisciplinary Mental Health Setting

    Science.gov (United States)

    Wendel, Richard; Gouze, Karen R.; Lake, MaryBeth

    2005-01-01

    Thirty years ago, leaders in psychiatry expressed hope for more interdisciplinary collaboration with family therapy. Since then marriage and family therapy (MFT) has entered the mainstream of clinical practice in psychiatry and psychology. It is mandated for training in psychiatry and psychology. We propose a model for collaboration, training, and…

  17. Modeling and optimization of cylindrical grinding of Al/SiC composites using genetic algorithms

    OpenAIRE

    Thiagarajan, C.; Sivaramakrishnan, R.; Somasundaram, S.

    2012-01-01

    The Al/SiC composites have received more commercial attention than other kinds of Metal Matrix Composites (MMCs) due to their high performance. However, a continuing problem with MMCs is that they are difficult to machine, due to the hardness and abrasive nature of the SiC particles. Grinding is often the method of choice for machining Al/SiC composites to acquire high dimensional accuracy and surface finish in large scale production. Based on the full factorial design (3(4)), a total of 81 e...

  18. Sqstm1 knock-down causes a locomotor phenotype ameliorated by rapamycin in a zebrafish model of ALS/FTLD.

    Science.gov (United States)

    Lattante, Serena; de Calbiac, Hortense; Le Ber, Isabelle; Brice, Alexis; Ciura, Sorana; Kabashi, Edor

    2015-03-15

    Mutations in SQSTM1, encoding for the protein SQSTM1/p62, have been recently reported in 1-3.5% of patients with amyotrophic lateral sclerosis and frontotemporal lobar degeneration (ALS/FTLD). Inclusions positive for SQSTM1/p62 have been detected in patients with neurodegenerative disorders, including ALS/FTLD. In order to investigate the pathogenic mechanisms induced by SQSTM1 mutations in ALS/FTLD, we developed a zebrafish model. Knock-down of the sqstm1 zebrafish ortholog, as well as impairment of its splicing, led to a specific phenotype, consisting of behavioral and axonal anomalies. Here, we report swimming deficits associated with shorter motor neuronal axons that could be rescued by the overexpression of wild-type human SQSTM1. Interestingly, no rescue of the loss-of-function phenotype was observed when overexpressing human SQSTM1 constructs carrying ALS/FTLD-related mutations. Consistent with its role in autophagy regulation, we found increased mTOR levels upon knock-down of sqstm1. Furthermore, treatment of zebrafish embryos with rapamycin, a known inhibitor of the mTOR pathway, yielded an amelioration of the locomotor phenotype in the sqstm1 knock-down model. Our results suggest that loss-of-function of SQSTM1 causes phenotypic features characterized by locomotor deficits and motor neuron axonal defects that are associated with a misregulation of autophagic processes. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  19. Analytical charge control model for AlGaN/GaN MIS-HFETs including an undepleted barrier layer

    Energy Technology Data Exchange (ETDEWEB)

    Shenghui, Lu; Jiangfeng, Du; Qian, Luo; Qi, Yu; Wei, Zhou; Jianxin, Xia; Mohua, Yang, E-mail: lushenghui@sohu.co [State key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054 (China)

    2010-09-15

    An analytical charge control model considering the insulator/AlGaN interface charge and undepleted Al-GaN barrier layer is presented for AlGaN/GaN metal-insulator-semiconductor heterostructure field effect transistors (MIS-HFETs) over the entire operation range of gate voltage. The whole process of charge control is analyzed in detail and partitioned into four regions: I-full depletion, II-partial depletion, III-neutral region and IV-electron accumulation at the insulator/AlGaN interface. The results show that two-dimensional electron gas (2DEG) saturates at the boundary of region II/III and the gate voltage should not exceed the 2DEG saturation voltage in order to keep the channel in control. In addition, the span of region II accounts for about 50% of the range of gate voltage before 2DEG saturates. The good agreement of the calculated transfer characteristic with the measured data confirms the validity of the proposed model. (semiconductor devices)

  20. Refinement of the Al-rich part of the Al–Cu–Re phase diagram and atomic model of the ternary Al{sub 6.2}Cu{sub 2}Re phase

    Energy Technology Data Exchange (ETDEWEB)

    Samuha, S. [Department of Materials Engineering, Ben Gurion University of the Negev, Beer Sheva 84105 (Israel); NRCN, P.O. Box 9001, Beer Sheva 84190 (Israel); Grushko, B. [MaTecK, Jülich D 52428 (Germany); PGI-5, Forschungszentrum Jülich, Jülich D 52425 (Germany); Meshi, L., E-mail: Louisa@bgu.ac.il [Department of Materials Engineering, Ben Gurion University of the Negev, Beer Sheva 84105 (Israel); Ilse Katz Institute for Nanoscale Science & Technology, Ben Gurion University of the Negev, Beer Sheva 84105 (Israel)

    2016-06-15

    Partial isothermal sections at 800, 650 and 590 °C were constructed for an Al-rich compositional range of Al–Cu–Re. The maximal solubility of Cu in the Al{sub 11}Re{sub 4}, h-Al{sub 4}Re and l-Al{sub 4}Re phases was found to be ∼6, 4.5, and 2.3 at% respectively, while the solubility of Re in the Al–Cu θ, η{sub 1} and ε{sub 2} phases was below 0.5 at%. Below 740 °C, a ternary hexagonal phase (P6{sub 3}, a = 1.1029 and c = 1.2746 nm) is formed in a small compositional range close to Al{sub 65}Cu{sub 25}Re{sub 10}. Its structural model was deduced by direct methods applied on the precession electron diffraction tomography data. - Highlights: • Al–Cu–Re was studied at 540–1030 °C up to 25 at% Re and 60 at% Cu. • Al{sub 11}Re{sub 4}, h-Al{sub 4}Re and l-Al{sub 4}Re dissolve 6, 4.5 and 2.3 at% Cu, respectively. • Earlier reported ternary compound Al{sub 8}CuRe was not confirmed. • Earlier reported ternary compound Al{sub 7}Cu{sub 2}Re is probably Al{sub 6.2}Cu{sub 2}Re. • Crystal structure of hexagonal Al{sub 6.2}Cu{sub 2}Re was solved.

  1. Metabolic therapy with Deanna Protocol supplementation delays disease progression and extends survival in amyotrophic lateral sclerosis (ALS mouse model.

    Directory of Open Access Journals (Sweden)

    Csilla Ari

    Full Text Available Amyotrophic Lateral Sclerosis (ALS, also known as Lou Gehrig's disease, is a neurodegenerative disorder of motor neurons causing progressive muscle weakness, paralysis, and eventual death from respiratory failure. There is currently no cure or effective treatment for ALS. Besides motor neuron degeneration, ALS is associated with impaired energy metabolism, which is pathophysiologically linked to mitochondrial dysfunction and glutamate excitotoxicity. The Deanna Protocol (DP is a metabolic therapy that has been reported to alleviate symptoms in patients with ALS. In this study we hypothesized that alternative fuels in the form of TCA cycle intermediates, specifically arginine-alpha-ketoglutarate (AAKG, the main ingredient of the DP, and the ketogenic diet (KD, would increase motor function and survival in a mouse model of ALS (SOD1-G93A. ALS mice were fed standard rodent diet (SD, KD, or either diets containing a metabolic therapy of the primary ingredients of the DP consisting of AAKG, gamma-aminobutyric acid, Coenzyme Q10, and medium chain triglyceride high in caprylic triglyceride. Assessment of ALS-like pathology was performed using a pre-defined criteria for neurological score, accelerated rotarod test, paw grip endurance test, and grip strength test. Blood glucose, blood beta-hydroxybutyrate, and body weight were also monitored. SD+DP-fed mice exhibited improved neurological score from age 116 to 136 days compared to control mice. KD-fed mice exhibited better motor performance on all motor function tests at 15 and 16 weeks of age compared to controls. SD+DP and KD+DP therapies significantly extended survival time of SOD1-G93A mice by 7.5% (p = 0.001 and 4.2% (p = 0.006, respectively. Sixty-three percent of mice in the KD+DP and 72.7% of the SD+DP group lived past 125 days, while only 9% of the control animals survived past that point. Targeting energy metabolism with metabolic therapy produces a therapeutic effect in ALS mice which

  2. Metabolic therapy with Deanna Protocol supplementation delays disease progression and extends survival in amyotrophic lateral sclerosis (ALS) mouse model.

    Science.gov (United States)

    Ari, Csilla; Poff, Angela M; Held, Heather E; Landon, Carol S; Goldhagen, Craig R; Mavromates, Nicholas; D'Agostino, Dominic P

    2014-01-01

    Amyotrophic Lateral Sclerosis (ALS), also known as Lou Gehrig's disease, is a neurodegenerative disorder of motor neurons causing progressive muscle weakness, paralysis, and eventual death from respiratory failure. There is currently no cure or effective treatment for ALS. Besides motor neuron degeneration, ALS is associated with impaired energy metabolism, which is pathophysiologically linked to mitochondrial dysfunction and glutamate excitotoxicity. The Deanna Protocol (DP) is a metabolic therapy that has been reported to alleviate symptoms in patients with ALS. In this study we hypothesized that alternative fuels in the form of TCA cycle intermediates, specifically arginine-alpha-ketoglutarate (AAKG), the main ingredient of the DP, and the ketogenic diet (KD), would increase motor function and survival in a mouse model of ALS (SOD1-G93A). ALS mice were fed standard rodent diet (SD), KD, or either diets containing a metabolic therapy of the primary ingredients of the DP consisting of AAKG, gamma-aminobutyric acid, Coenzyme Q10, and medium chain triglyceride high in caprylic triglyceride. Assessment of ALS-like pathology was performed using a pre-defined criteria for neurological score, accelerated rotarod test, paw grip endurance test, and grip strength test. Blood glucose, blood beta-hydroxybutyrate, and body weight were also monitored. SD+DP-fed mice exhibited improved neurological score from age 116 to 136 days compared to control mice. KD-fed mice exhibited better motor performance on all motor function tests at 15 and 16 weeks of age compared to controls. SD+DP and KD+DP therapies significantly extended survival time of SOD1-G93A mice by 7.5% (p = 0.001) and 4.2% (p = 0.006), respectively. Sixty-three percent of mice in the KD+DP and 72.7% of the SD+DP group lived past 125 days, while only 9% of the control animals survived past that point. Targeting energy metabolism with metabolic therapy produces a therapeutic effect in ALS mice which may prolong

  3. Parvalbumin overexpression alters immune-mediated increases in intracellular calcium, and delays disease onset in a transgenic model of familial amyotrophic lateral sclerosis

    Science.gov (United States)

    Beers, D. R.; Ho, B. K.; Siklos, L.; Alexianu, M. E.; Mosier, D. R.; Mohamed, A. H.; Otsuka, Y.; Kozovska, M. E.; McAlhany, R. E.; Smith, R. G.; hide

    2001-01-01

    Intracellular calcium is increased in vulnerable spinal motoneurons in immune-mediated as well as transgenic models of amyotrophic lateral sclerosis (ALS). To determine whether intracellular calcium levels are influenced by the calcium-binding protein parvalbumin, we developed transgenic mice overexpressing parvalbumin in spinal motoneurons. ALS immunoglobulins increased intracellular calcium and spontaneous transmitter release at motoneuron terminals in control animals, but not in parvalbumin overexpressing transgenic mice. Parvalbumin transgenic mice interbred with mutant SOD1 (mSOD1) transgenic mice, an animal model of familial ALS, had significantly reduced motoneuron loss, and had delayed disease onset (17%) and prolonged survival (11%) when compared with mice with only the mSOD1 transgene. These results affirm the importance of the calcium binding protein parvalbumin in altering calcium homeostasis in motoneurons. The increased motoneuron parvalbumin can significantly attenuate the immune-mediated increases in calcium and to a lesser extent compensate for the mSOD1-mediated 'toxic-gain-of-function' in transgenic mice.

  4. Numerical Simulation of Tension Properties for Al-Cu Alloy Friction Stir-Welded Joints with GTN Damage Model

    Science.gov (United States)

    Sun, Guo-Qin; Sun, Feng-Yang; Cao, Fang-Li; Chen, Shu-Jun; Barkey, Mark E.

    2015-11-01

    The numerical simulation of tensile fracture behavior on Al-Cu alloy friction stir-welded joint was performed with the Gurson-Tvergaard-Needleman (GTN) damage model. The parameters of the GTN model were studied in each region of the friction stir-welded joint by means of inverse identification. Based on the obtained parameters, the finite element model of the welded joint was built to predict the fracture behavior and tension properties. Good agreement can be found between the numerical and experimental results in the location of the tensile fracture and the mechanical properties.

  5. Nonlocal superelastic model of size-dependent hardening and dissipation in single crystal Cu-Al-Ni shape memory alloys.

    Science.gov (United States)

    Qiao, Lei; Rimoli, Julian J; Chen, Ying; Schuh, Christopher A; Radovitzky, Raul

    2011-02-25

    We propose a nonlocal continuum model to describe the size-dependent superelastic effect observed in recent experiments of single crystal Cu-Al-Ni shape memory alloys. The model introduces two length scales, one in the free energy and one in the dissipation, which account for the size-dependent hardening and dissipation in the loading and unloading response of micro- and nanopillars subject to compression tests. The information provided by the model suggests that the size dependence observed in the dissipation is likely to be associated with a nonuniform evolution of the distribution of the austenitic and martensitic phases during the loading cycle. © 2011 American Physical Society

  6. Days La Familia community drug and alcohol prevention program: Family-centered model for working with inner-city Hispanic families.

    Science.gov (United States)

    Hernandez, L P; Lucero, E

    1996-03-01

    Substance abuse among Hispanics is on the increase despite national efforts toward reducing it. Researchers and service providers have recognized the specific need for better prevention models that address the issues of poor Hispanics. La Familia is a community-based ATOD prevention program that targets Hispanic families with high-risk youth from 6 to 11 years old, and attempts to reduce identified risk factors while building on culturally relevant protective factors. During the 2 years, the program has enrolled 219 youth and their families utilizing existing community networks and aggressive outreach. The program resulted in a 92% retention rate and over 80% attendance per session. As a result of the program, families became more willing to discuss ATOD issues openly and made positive steps toward empowerment.

  7. Voigt modelling of size–strain analysis: Application to α-Al2O3 ...

    Indian Academy of Sciences (India)

    Unknown

    urea mixture, annealed samples and commercial α-Al2O3 sample. It is likely from the ... used for line broadening studies, the Stokes deconvolu- tion (Stokes 1948) ... unbiased approach to obtain the 'true specimen broad- ened' profile ... Experimental ... the Warren–Averbach method, simplified integral breadth method and ...

  8. Modeling of Precipitation Sequence and Ageing Kinetics in Al-Mg-Si Alloys

    NARCIS (Netherlands)

    Bahrami, A.

    2010-01-01

    Al-Mg-Si alloys are heat treatable alloys in which strength is obtained by precipitation hardening. Precipitates, formed from a supersaturated solid solution during ageing heat treatment, are GP-zones, B", B´ and B-Mg2Si. Precipitation kinetics and strength vary with alloy composition and process

  9. CLC in packed beds using syngas and CuO/Al2O3: Model description and experimental validation

    International Nuclear Information System (INIS)

    Hamers, H.P.; Gallucci, F.; Cobden, P.D.; Kimball, E.; Sint Annaland, M. van

    2014-01-01

    Highlights: • CLC with CuO/Al 2 O 3 and syngas and air has been demonstrated experimentally. • Model predicts accurately only if kinetics describe the complete solid reduction. • CuO/Al 2 O 3 is proven to catalyze the reversed water gas shift reaction. • H 2 O is more effective to suppress carbon deposition on CuO/Al 2 O 3 than CO 2 . • The OC reaction rate is not permanently affected by exposure to H 2 S. - Abstract: The objective of this work is to study the performance of the oxygen carrier in a packed bed with periodic switching between oxidizing and reducing conditions. In this paper the performance of CuO/Al 2 O 3 as the oxygen carrier in a packed bed reactor with syngas as the fuel are investigated, while also studying the (possible) carbon deposition and the effect of sulphur impurities on the stability of the carrier. Both experiments and simulations are used in this work. Cyclic experiments (oxidation with air and reduction with syngas) have been carried out in a lab scale packed bed reactor with 13 wt% CuO/Al 2 O 3 . The experimental results were well described by a 1D reactor model, provided that critical attention was given to the reaction rate for the complete reduction reaction, including a dramatic decrease in reaction rate at high solid conversions. Feeding syngas (p H2 = p CO = 0.1 bar) resulted in 1.1% carbon deposition of the feed. Steam was proven to be more effective in reducing carbon deposition than CO 2 . Moreover, it has been found that CuO/Al 2 O 3 catalyzed the water gas shift reaction and the reaction rate was not permanently affected by exposure to H 2 S, two key factors for CLC operation. The results of this work imply that CuO/Al 2 O 3 is an effective oxygen carrier as the first packed bed reactor in a TSCLC process and that the developed model is able to describe the performance at larger scales accurately

  10. A ''missing'' caesium member in the family of A{sub 3}Al{sub 2}P{sub 3}O{sub 12} aluminophosphates

    Energy Technology Data Exchange (ETDEWEB)

    Shvanskaya, Larisa [Moscow State Univ. (Russian Federation). Dept. of Crystallography; National Univ. of Science and Technology, Moscow (Russian Federation).; Yakubovich, Olga [Moscow State Univ. (Russian Federation). Dept. of Crystallography

    2017-07-01

    A new caesium aluminophosphate, Cs{sub 3}Al{sub 2}P{sub 3}O{sub 12}, has been synthesized by spontaneous crystallization from the melt and structurally characterized. The compound crystallizes in the orthorhombic space group Pnma, with a=9.7675(2) Aa, b=17.7537(3) Aa, c=8.1063(2) Aa, V=1405.71(2) Aa{sup 3}, and Z=4. Its crystal structure is based on an open interrupted framework built by alternating AlO{sub 4} and PO{sub 4} tetrahedra with Cs ions occupying the channels. The Cs{sub 3}Al{sub 2}P{sub 3}O{sub 12} framework topology resembles the previously known 4.8.12-net, which has been reported in the [C{sub 4}N{sub 3}H{sub 16}][Al{sub 2}P{sub 3}O{sub 12}] phase prepared by solvothermal synthesis in the presence of diethylenetriamine (DETA). The crystal chemical relationships between the K, Rb, Cs, Tl, [NH{sub 4}] and [C{sub 4}N{sub 3}H{sub 16}]-members of the A{sub 3}Al{sub 2}P{sub 3}O{sub 12} family of compounds are discussed.

  11. The effect of a supportive educational program based on COPE model on caring burden and quality of life in family caregivers of women with breast cancer.

    Science.gov (United States)

    Bahrami, Masoud; Farzi, Saba

    2014-03-01

    The family caregivers of the people with cancer such as breast cancer experience a decrease in their quality of life and an increase of their caring burden. In most of the cases, the researchers consider the quality of life and physical and psychological problems in patients with cancer and pay less attention to the family caregivers. To reduce the caring burden imposed to the caregivers and improve their quality of life, supportive strategies such as problem solving can be used. These interventions may have benefits for the caregivers although the research results are contradictory. The aim of this research was to determine the effect of a supportive educational program, based on COPE model, which focuses on creativity, optimism, planning, and expert information on individuals, on the caring burden and quality of life in the family caregivers of women with breast cancer. The present study is a clinical trial, which was conducted in Seyed-Al-Shohada Hospital of Isfahan University of Medical Sciences and a private center of chemotherapy in 2012. In this study, researchers investigated the effect of a supportive educational program based on COPE model on the caring burden and quality of life in the family caregivers of women with breast cancer. This supportive educational program included two hospital visits and two telephone sessions based on COPE model for 9 days. A total of 64 patients were selected based on the inclusion criteria and randomly assigned into two groups. Data were collected by use of Caregiver Quality of Life Index-Cancer (CQOL-C), World Health Organization Quality of Life - Bref(WHOQOL-Bref)_, and Zarit caring burden at the beginning of the intervention and a month after the intervention. The results showed that in the experimental group, the mean score of physical, mental, spiritual, environmental domains and overall quality of life in the family caregivers was significantly increased compared to the control group, but there was no change in the

  12. Adaptive Calibration of Children's Physiological Responses to Family Stress: The Utility of Evolutionary Developmental Theory--Comment on Del Giudice et al. (2012) and Sturge-Apple et al. (2012)

    Science.gov (United States)

    Bugental, Daphne Blunt

    2012-01-01

    Children's physiological reactions to stress are presented from the broader theoretical perspective of adaptive calibration to the environment, as rooted in life history theory. Del Giudice, Hinnant, Ellis, and El-Sheikh (2012) focus on children's physiological responses to a stressful task as a consequence of their history of family stress.…

  13. The dark side of family communication: a communication model of elder abuse and neglect.

    Science.gov (United States)

    Lin, Mei-Chen; Giles, Howard

    2013-08-01

    To further address the potential factors that lead up to elder abuse in domestic settings, this paper proposes a model from a communication approach to explain dyadic influences between the family caregiver and the elderly care receiver that give rise to the abuse. That is, dysfunctional communication between the caregivers and care receivers may, therefore, increase the likelihood of elder abuse. Grounded in Bugental and her colleagues' work (1993, 1999, 2002) on child abuse, we propose a power-oriented communication model based, in part, on research in the fields of family violence and intergenerational communication to explain the likelihood of occurrence of elder abuse in family caregiving situations. We argue that certain risk factors pertaining to caregivers' characteristics--those who perceive high stress in caregiving, have mental health issues, have a history of substance abuse, and/or display verbal aggressiveness--may be more likely to attribute considerable power to those elderly under their custodianship. At the same time, such caregivers tend to feel powerless and experience loss of control when interacting with their elderly counterparts. When an elderly care receiver displays noncompliant behaviors, caregivers may be prone to employ abusive behaviors (in our model, it refers to physical abuse, verbal abuse, or communication neglect) to seek such compliance. Consequences of such abuse may result in lower self-esteem or lower confidence in one's ability to manage his/her life. It is suggested that researchers and practitioners investigate both parties' interactions closely and the role of elderly care receivers in order to detect, intervene, and prevent elder abuse.

  14. Parents' attachment histories and children's externalizing and internalizing behaviors: exploring family systems models of linkage.

    Science.gov (United States)

    Cowan, P A; Cowan, C P; Cohn, D A; Pearson, J L

    1996-02-01

    Twenty-seven mothers and 27 fathers were given the Adult Attachment Interview (M. Main & R. Goldwyn, in press) when their children were 3.5 years old. Continuous ratings of narrative coherence, probable experience quality (parents perceived as loving), and state of mind (current anger at parents) were entered as latent variables in partial least squares structural equation models that included observational measures of marital quality and parenting style. Models that include fathers' attachment histories predicted more variance in kindergarten teachers' descriptions of children's externalizing behavior, whereas models that include mothers' attachment histories predicted more variance in children's internalizing behavior. Marital data added predictive power to the equations. Discussion is focused on the importance of integrating attachment and family systems approaches, and of parents' gender and marital quality, in understanding specific links between parents' attachment histories and their young children's externalizing and internalizing behaviors.

  15. Exploiting the flexibility of a family of models for taxation and redistribution

    Science.gov (United States)

    Bertotti, M. L.; Modanese, G.

    2012-08-01

    We discuss a family of models expressed by nonlinear differential equation systems describing closed market societies in the presence of taxation and redistribution. We focus in particular on three example models obtained in correspondence to different parameter choices. We analyse the influence of the various choices on the long time shape of the income distribution. Several simulations suggest that behavioral heterogeneity among the individuals plays a definite role in the formation of fat tails of the asymptotic stationary distributions. This is in agreement with results found with different approaches and techniques. We also show that an excellent fit for the computational outputs of our models is provided by the κ-generalized distribution introduced by Kaniadakis in [Physica A 296, 405 (2001)].

  16. A Family of Well-Clear Boundary Models for the Integration of UAS in the NAS

    Science.gov (United States)

    Munoz, Cesar A.; Narkawicz, Anthony; Chamberlain, James; Consiglio, Maria; Upchurch, Jason

    2014-01-01

    The FAA-sponsored Sense and Avoid Workshop for Unmanned Aircraft Systems (UAS) defines the concept of sense and avoid for remote pilots as "the capability of a UAS to remain well clear from and avoid collisions with other airborne traffic." Hence, a rigorous definition of well clear is fundamental to any separation assurance concept for the integration of UAS into civil airspace. This paper presents a family of well-clear boundary models based on the TCAS II Resolution Advisory logic. For these models, algorithms that predict well-clear violations along aircraft current trajectories are provided. These algorithms are analogous to conflict detection algorithms but instead of predicting loss of separation, they predict whether well-clear violations will occur during a given lookahead time interval. Analytical techniques are used to study the properties and relationships satisfied by the models.

  17. A diffusion-limited reaction model for self-propagating Al/Pt multilayers with quench limits

    Science.gov (United States)

    Kittell, D. E.; Yarrington, C. D.; Hobbs, M. L.; Abere, M. J.; Adams, D. P.

    2018-04-01

    A diffusion-limited reaction model was calibrated for Al/Pt multilayers ignited on oxidized silicon, sapphire, and tungsten substrates, as well as for some Al/Pt multilayers ignited as free-standing foils. The model was implemented in a finite element analysis code and used to match experimental burn front velocity data collected from several years of testing at Sandia National Laboratories. Moreover, both the simulations and experiments reveal well-defined quench limits in the total Al + Pt layer (i.e., bilayer) thickness. At these limits, the heat generated from atomic diffusion is insufficient to support a self-propagating wave front on top of the substrates. Quench limits for reactive multilayers are seldom reported and are found to depend on the thermal properties of the individual layers. Here, the diffusion-limited reaction model is generalized to allow for temperature- and composition-dependent material properties, phase change, and anisotropic thermal conductivity. Utilizing this increase in model fidelity, excellent overall agreement is shown between the simulations and experimental results with a single calibrated parameter set. However, the burn front velocities of Al/Pt multilayers ignited on tungsten substrates are over-predicted. Possible sources of error are discussed and a higher activation energy (from 41.9 kJ/mol.at. to 47.5 kJ/mol.at.) is shown to bring the simulations into agreement with the velocity data observed on tungsten substrates. This higher activation energy suggests an inhibited diffusion mechanism present at lower heating rates.

  18. Quasi-Unit-Cell Model for an Al-Ni-Co Ideal Quasicrystal based on Clusters with Broken Tenfold Symmetry

    International Nuclear Information System (INIS)

    Abe, Eiji; Saitoh, Koh; Takakura, H.; Tsai, A. P.; Steinhardt, P. J.; Jeong, H.-C.

    2000-01-01

    We present new evidence supporting the quasi-unit-cell description of the Al 72 Ni 20 Co 8 decagonal quasicrystal which shows that the solid is composed of repeating, overlapping decagonal cluster columns with broken tenfold symmetry. We propose an atomic model which gives a significantly improved fit to electron microscopy experiments compared to a previous proposal by us and to alternative proposals with tenfold symmetric clusters. (c) 2000 The American Physical Society

  19. A study of probabilistic fatigue crack propagation models in Mg Al Zn alloys under different specimen thickness conditions by using the residual of a random variable

    International Nuclear Information System (INIS)

    Choi, Seon Soon

    2012-01-01

    The primary aim of this paper was to evaluate several probabilistic fatigue crack propagation models using the residual of a random variable, and to present the model fit for probabilistic fatigue behavior in Mg Al Zn alloys. The proposed probabilistic models are the probabilistic Paris Erdogan model, probabilistic Walker model, probabilistic Forman model, and probabilistic modified Forman models. These models were prepared by applying a random variable to the empirical fatigue crack propagation models with these names. The best models for describing fatigue crack propagation models with these names. The best models for describing fatigue crack propagation models with these names. The best models for describing fatigue crack propagation models with these names. The best models vor describing fatigue crack propagation behavior in Mg Al Zn alloys were generally the probabilistic Paris Erdogan and probabilistic Walker models. The probabilistic Forman model was a good model only for a specimen with a thickness of 9.45mm

  20. Lepton masses and mixings in orbifold models with three Higgs families

    International Nuclear Information System (INIS)

    Escudero, N.; Munoz, C.; Teixeira, A.M.

    2007-01-01

    We analyse the phenomenological viability of heterotic Z 3 orbifolds with two Wilson lines, which naturally predict three supersymmetric families of matter and Higgs fields. Given that these models can accommodate realistic scenarios for the quark sector avoiding potentially dangerous flavour-changing neutral currents, we now address the leptonic sector, finding that viable orbifold configurations can in principle be obtained. In particular, it is possible to accomodate present data on charged lepton masses, while avoiding conflict with lepton flavour-violating decays. Concerning the generation of neutrino masses and mixings, we find that Z 3 orbifolds offer several interesting possibilities

  1. First-principles calculations for the elastic properties of Ni-base model superalloys: Ni/Ni3Al multilayers

    International Nuclear Information System (INIS)

    Yun-Jiang, Wang; Chong-Yu, Wang

    2009-01-01

    A model system consisting of Ni[001](100)/Ni 3 Al[001](100) multi-layers are studied using the density functional theory in order to explore the elastic properties of single crystal Ni-based superalloys. Simulation results are consistent with the experimental observation that rafted Ni-base superalloys virtually possess a cubic symmetry. The convergence of the elastic properties with respect to the thickness of the multilayers are tested by a series of multilayers from 2γ'+2γ to 10γ'+10γ atomic layers. The elastic properties are found to vary little with the increase of the multilayer's thickness. A Ni/Ni 3 Al multilayer with 10γ'+10γ atomic layers (3.54 nm) can be used to simulate the mechanical properties of Ni-base model superalloys. Our calculated elastic constants, bulk modulus, orientation-dependent shear modulus and Young's modulus, as well as the Zener anisotropy factor are all compatible with the measured results of Ni-base model superalloys R1 and the advanced commercial superalloys TMS-26, CMSX-4 at a low temperature. The mechanical properties as a function of the γ' phase volume fraction are calculated by varying the proportion of the γ and γ' phase in the multilayers. Besides, the mechanical properties of two-phase Ni/Ni 3 Al multilayer can be well predicted by the Voigt–Reuss–Hill rule of mixtures. (classical areas of phenomenology)

  2. Development of a family nursing model for prevention of cancer and other noncommunicable diseases through an appreciative inquiry.

    Science.gov (United States)

    Jongudomkarn, Darunee; Macduff, Colin

    2014-01-01

    Cancer and non-communicable diseases are a major issue not only for the developed but also developing countries. Public health and primary care nursing offer great potential for primary and secondary prevention of these diseases through community and family-based approaches. Within Thailand there are related established educational curricula but less is known about how graduate practitioners enact ideas in practice and how these can influence policy at local levels. The aim of this inquiry was to develop family nursing practice in primary care settings in the Isaan region or Northeastern Thailand and to distill what worked well into a nursing model to guide practice. An appreciative inquiry approach involving analysis of written reports, focus group discussions and individual interviews was used to synthesize what worked well for fourteen family nurses involved in primary care delivery and to build the related model. Three main strategies were seen to offer a basis for optimal care delivery, namely: enacting a participatory action approach mobilizing families' social capital; using family nursing process; and implementing action strategies within communities. These were distilled into a new conceptual model. The model has some features in common with related community partnership models and the World Health Organization Europe Family Health Nurse model, but highlights practical strategies for family nursing enactment. The model offers a basis not only for planning and implementing family care to help prevent cancer and other diseases but also for education of nurses and health care providers working in communities. This articulation of what works in this culture also offers possible transference to different contexts internationally, with related potential to inform health and social care policies, and international development of care models.

  3. Geometrically engineering the standard model: Locally unfolding three families out of E8

    International Nuclear Information System (INIS)

    Bourjaily, Jacob L.

    2007-01-01

    This paper extends and builds upon the results of [J. L. Bourjaily, arXiv:0704.0444.], in which we described how to use the tools of geometrical engineering to deform geometrically engineered grand unified models into ones with lower symmetry. This top-down unfolding has the advantage that the relative positions of singularities giving rise to the many 'low-energy' matter fields are related by only a few parameters which deform the geometry of the unified model. And because the relative positions of singularities are necessary to compute the superpotential, for example, this is a framework in which the arbitrariness of geometrically engineered models can be greatly reduced. In [J. L. Bourjaily, arXiv:0704.0444.], this picture was made concrete for the case of deforming the representations of an SU 5 model into their standard model content. In this paper we continue that discussion to show how a geometrically engineered 16 of SO 10 can be unfolded into the standard model, and how the three families of the standard model uniquely emerge from the unfolding of a single, isolated E 8 singularity

  4. Maple Syrup Decreases TDP-43 Proteotoxicity in a Caenorhabditis elegans Model of Amyotrophic Lateral Sclerosis (ALS).

    Science.gov (United States)

    Aaron, Catherine; Beaudry, Gabrielle; Parker, J Alex; Therrien, Martine

    2016-05-04

    Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease causing death of the motor neurons. Proteotoxicity caused by TDP-43 protein is an important aspect of ALS pathogenesis, with TDP-43 being the main constituent of the aggregates found in patients. We have previously tested the effect of different sugars on the proteotoxicity caused by the expression of mutant TDP-43 in Caenorhabditis elegans. Here we tested maple syrup, a natural compound containing many active molecules including sugars and phenols, for neuroprotective activity. Maple syrup decreased several age-dependent phenotypes caused by the expression of TDP-43(A315T) in C. elegans motor neurons and requires the FOXO transcription factor DAF-16 to be effective.

  5. Model Development for Current–Voltage and Transconductance Characteristics of Normally-off AlN/GaN MOSHEMT

    International Nuclear Information System (INIS)

    Swain, R.; Jena, K.; Lenka, T. R.

    2016-01-01

    In this paper, an AlN/GaN-based MOSHEMT is proposed, in accordance to this, a charge control model has been developed analytically and simulated with MATLAB to predict the characteristics of threshold voltage, drain currents and transconductance. The physics based models for 2DEG density, threshold voltage and quantum capacitance in the channel has been put forward. By using these developed models, the drain current for both linear and saturation models is derived. The predicted threshold voltage with the variation of barrier thickness has been plotted. A positive threshold voltage can be obtained by decreasing the barrier thickness which builds up the foundation for enhancement mode MOSHEMT devices. The predicted I_d–V_g_s, I_d–V_d_s and transconductance characteristics show an excellent agreement with the experimental results and hence validate the model.

  6. Groundwater monitoring program plan and conceptual site model for the Al-Tuwaitha Nuclear Research Center in Iraq.

    Energy Technology Data Exchange (ETDEWEB)

    Copland, John Robin; Cochran, John Russell

    2013-07-01

    The Radiation Protection Center of the Iraqi Ministry of Environment is developing a groundwater monitoring program (GMP) for the Al-Tuwaitha Nuclear Research Center located near Baghdad, Iraq. The Al-Tuwaitha Nuclear Research Center was established in about 1960 and is currently being cleaned-up and decommissioned by Iraqs Ministry of Science and Technology. This Groundwater Monitoring Program Plan (GMPP) and Conceptual Site Model (CSM) support the Radiation Protection Center by providing: A CSM describing the hydrogeologic regime and contaminant issues, recommendations for future groundwater characterization activities, and descriptions of the organizational elements of a groundwater monitoring program. The Conceptual Site Model identifies a number of potential sources of groundwater contamination at Al-Tuwaitha. The model also identifies two water-bearing zones (a shallow groundwater zone and a regional aquifer). The depth to the shallow groundwater zone varies from approximately 7 to 10 meters (m) across the facility. The shallow groundwater zone is composed of a layer of silty sand and fine sand that does not extend laterally across the entire facility. An approximately 4-m thick layer of clay underlies the shallow groundwater zone. The depth to the regional aquifer varies from approximately 14 to 17 m across the facility. The regional aquifer is composed of interfingering layers of silty sand, fine-grained sand, and medium-grained sand. Based on the limited analyses described in this report, there is no severe contamination of the groundwater at Al-Tuwaitha with radioactive constituents. However, significant data gaps exist and this plan recommends the installation of additional groundwater monitoring wells and conducting additional types of radiological and chemical analyses.

  7. Adolescents of the U.S. National Longitudinal Lesbian Family Study: male role models, gender role traits, and psychological adjustment

    NARCIS (Netherlands)

    Bos, H.; Goldberg, N.; van Gelderen, L.; Gartrell, N.

    2012-01-01

    This article focuses on the influence of male role models on the lives of adolescents (N = 78) in the U.S. National Longitudinal Lesbian Family Study. Half of the adolescents had male role models; those with and those without male role models had similar scores on the feminine and masculine scales

  8. Young Children's Reasoning About Physical & Behavioural Family Resemblance: Is There a Place for a Precursor Model of Inheritance?

    Science.gov (United States)

    Ergazaki, Marida; Alexaki, Aspa; Papadopoulou, Chrysa; Kalpakiori, Marieleni

    2014-02-01

    This paper aims at exploring (a) whether preschoolers recognize that offspring share physical traits with their parents due to birth and behavioural ones due to nurture, and (b) whether they seem ready to explain shared physical traits with a `pre-biological' causal model that includes the contribution of both parents and a rudimentary notion of genes. This exploration is supposed to provide evidence for our next step, which is the development of an early years' learning environment about inheritance. Conducting individual, semi-structured interviews with 90 preschoolers (age 4.5-5.5) of four public kindergartens in Patras, we attempted to trace their reasoning about (a) whether and why offspring share physical and behavioural traits with parents and (b) which mechanism could better explain the shared physical traits. The probes were a modified six-case version of Solomon et al. (Child Dev 67:151-171, 1996) `adoption task, as well as a three-case task based on Springer's (Child Dev 66:547-558, 1995) `mechanism task' and on Solomon and Johnson's (Br J Dev Psychol 18(1):81-96, 2000) idea of genes as a `conceptual placeholder'. The qualitative and quantitative analysis of the interviews showed overlapping reasoning about the origin of physical and behavioural family resemblance. Nevertheless, we did trace the `birth-driven' argument for the attribution of the offspring's physical traits to the biological parents, as well as a preference for the `pre-biological' model that introduces a rudimentary idea of genes in order to explain shared physical traits between parents and offspring. The findings of the study and the educational implications are thoroughly discussed.

  9. [Family Health Teams in Ontario: Ideas for Germany from a Canadian Primary Care Model].

    Science.gov (United States)

    Ulrich, Lisa-R; Pham, Thuy-Nga Tia; Gerlach, Ferdinand M; Erler, Antje

    2017-07-11

    The German healthcare system is struggling with fragmentation of care in the face of an increasing shortage of general practitioners and allied health professionals, and the time-demanding healthcare needs of an aging, multimorbid patient population. Innovative interprofessional, intersectoral models of care are required to ensure adequate access to primary care across a variety of rural and urban settings into the foreseeable future. A team approach to care of the complex multimorbid patient population appears particularly suitable in attracting and retaining the next generation of healthcare professionals, including general practitioners. In 2014, the German Advisory Council on the Assessment of Developments in the Health Care System highlighted the importance of regional, integrated care with community-based primary care centres at its core, providing comprehensive, population-based, patient-centred primary care with adequate access to general practitioners for a given geographical area. Such centres exist already in Ontario, Canada; within Family Health Teams (FHT), family physicians work hand-in-hand with pharmacists, nurses, nurse practitioners, social workers, and other allied health professionals. In this article, the Canadian model of FHT will be introduced and we will discuss which components could be adapted to suit the German primary care system. © Georg Thieme Verlag KG Stuttgart · New York.

  10. Dynamical generalization of a solvable family of two-electron model atoms with general interparticle repulsion

    International Nuclear Information System (INIS)

    Niehaus, T A; Suhai, S; March, N H

    2008-01-01

    Holas, Howard and March (2003 Phys. Lett. A 310 451) have obtained analytic solutions for ground-state properties of a whole family of two-electron spin-compensated harmonically confined model atoms whose different members are characterized by a specific interparticle potential energy u(r 12 ). Here, we make a start on the dynamic generalization of the harmonic external potential, the motivation being the serious criticism levelled recently against the foundations of time-dependent density-functional theory (e.g., Schirmer and Dreuw 2007 Phys. Rev. A 75 022513). In this context, we derive a simplified expression for the time-dependent electron density for arbitrary interparticle interaction, which is fully determined by a one-dimensional non-interacting Hamiltonian. Moreover, a closed solution for the momentum space density in the Moshinsky model is obtained

  11. Dopamine-dependent neurodegeneration in Drosophila models of familial and sporadic Parkinson's disease.

    Science.gov (United States)

    Bayersdorfer, Florian; Voigt, Aaron; Schneuwly, Stephan; Botella, José A

    2010-10-01

    Parkinson's disease has been found to be caused by both, genetic and environmental factors. Despite the diversity of causes involved, a convergent pathogenic mechanism might underlie the special vulnerability of dopaminergic neurons in different forms of Parkinsonism. In recent years, a number of reports have proposed dopamine as a common player responsible in the loss of dopaminergic neurons independent of its etiology. Using RNAi lines we were able to generate flies with drastically reduced dopamine levels in the dopaminergic neurons. Combining these flies with a chemically induced Parkinson model (rotenone) and a familial form of Parkinson (mutant alpha-synuclein) we were able to show a strong reduction of neurotoxicity and a protection of the dopaminergic neurons when cellular dopamine levels were reduced. These results show that dopamine homeostasis plays a central role for the susceptibility of dopaminergic neurons to environmental and genetic factors in in vivo models of Parkinson disease. (c) 2010 Elsevier Inc. All rights reserved.

  12. Review: Speciation in the myrtle family (Myrtaceae: rapid and slow models

    Directory of Open Access Journals (Sweden)

    PUDJI WIDODO

    2007-01-01

    Full Text Available Speciation or formation of new species is a process which may take very long time. When a new species is really formed from a previous species is still unknown exactly. However, sometimes when populations no longer interbreed, they are thought to be separate species. As natural selection, if populations adapt the occupying different environments, they will diverge into races, subspecies, and finally separate species. There are some models of speciation such as geographical, polyploidy, chromosomal, and ecological speciation. However, in the myrtle family (Myrtaceae they can be grouped into two big models of speciation namely the rapid and slow speciation. This review points out that hybridization is a major factor affecting Myrtaceae, although evolution activities were also approved by the fact that some fossil pollens have been found in Antartica

  13. Rasch family models in e-learning: analyzing architectural sketching with a digital pen.

    Science.gov (United States)

    Scalise, Kathleen; Cheng, Nancy Yen-Wen; Oskui, Nargas

    2009-01-01

    Since architecture students studying design drawing are usually assessed qualitatively on the basis of their final products, the challenges and stages of their learning have remained masked. To clarify the challenges in design drawing, we have been using the BEAR Assessment System and Rasch family models to measure levels of understanding for individuals and groups, in order to correct pedagogical assumptions and tune teaching materials. This chapter discusses the analysis of 81 drawings created by architectural students to solve a space layout problem, collected and analyzed with digital pen-and-paper technology. The approach allows us to map developmental performance criteria and perceive achievement overlaps in learning domains assumed separate, and then re-conceptualize a three-part framework to represent learning in architectural drawing. Results and measurement evidence from the assessment and Rasch modeling are discussed.

  14. Comment on “Mathematical modeling of unicellular microalgae and cyanobacteria metabolism for biofuel production” by Baroukh et al. [Curr Opin Biotechnol. 2015, 33:198–205

    Energy Technology Data Exchange (ETDEWEB)

    Song, Hyun-Seob; Ramkrishna, Doraiswami

    2016-04-01

    This letter concerns an article recently published in Current Opinion in Biotechnology by Baroukh et al. entitled "Mathematical modeling of unicellular microalgae and cyanobacteria metabolism for biofuel production" (2015 Mar 26; 33:198-205). The issue we wish to bring to light is the authors’ claim that dynamic metabolic models including Hybrid Cybernetic Model (HCM) (Kim et al., 2008; Song et al., 2009) and Lumped HCM (L-HCM) (Song and Ramkrishna, 2010; 2011) are based on the balanced growth hypothesis so that they are unable to simulate the accumulation of intracellular metabolites. This is a misrepresentation of these models due to the following reasons.

  15. Work–Family Conflict and Mental Health Among Female Employees: A Sequential Mediation Model via Negative Affect and Perceived Stress

    Science.gov (United States)

    Zhou, Shiyi; Da, Shu; Guo, Heng; Zhang, Xichao

    2018-01-01

    After the implementation of the universal two-child policy in 2016, more and more working women have found themselves caught in the dilemma of whether to raise a baby or be promoted, which exacerbates work–family conflicts among Chinese women. Few studies have examined the mediating effect of negative affect. The present study combined the conservation of resources model and affective events theory to examine the sequential mediating effect of negative affect and perceived stress in the relationship between work–family conflict and mental health. A valid sample of 351 full-time Chinese female employees was recruited in this study, and participants voluntarily answered online questionnaires. Pearson correlation analysis, structural equation modeling, and multiple mediation analysis were used to examine the relationships between work–family conflict, negative affect, perceived stress, and mental health in full-time female employees. We found that women’s perceptions of both work-to-family conflict and family-to-work conflict were significant negatively related to mental health. Additionally, the results showed that negative affect and perceived stress were negatively correlated with mental health. The 95% confidence intervals indicated the sequential mediating effect of negative affect and stress in the relationship between work–family conflict and mental health was significant, which supported the hypothesized sequential mediation model. The findings suggest that work–family conflicts affected the level of self-reported mental health, and this relationship functioned through the two sequential mediators of negative affect and perceived stress. PMID:29719522

  16. Work-Family Conflict and Mental Health Among Female Employees: A Sequential Mediation Model via Negative Affect and Perceived Stress.

    Science.gov (United States)

    Zhou, Shiyi; Da, Shu; Guo, Heng; Zhang, Xichao

    2018-01-01

    After the implementation of the universal two-child policy in 2016, more and more working women have found themselves caught in the dilemma of whether to raise a baby or be promoted, which exacerbates work-family conflicts among Chinese women. Few studies have examined the mediating effect of negative affect. The present study combined the conservation of resources model and affective events theory to examine the sequential mediating effect of negative affect and perceived stress in the relationship between work-family conflict and mental health. A valid sample of 351 full-time Chinese female employees was recruited in this study, and participants voluntarily answered online questionnaires. Pearson correlation analysis, structural equation modeling, and multiple mediation analysis were used to examine the relationships between work-family conflict, negative affect, perceived stress, and mental health in full-time female employees. We found that women's perceptions of both work-to-family conflict and family-to-work conflict were significant negatively related to mental health. Additionally, the results showed that negative affect and perceived stress were negatively correlated with mental health. The 95% confidence intervals indicated the sequential mediating effect of negative affect and stress in the relationship between work-family conflict and mental health was significant, which supported the hypothesized sequential mediation model. The findings suggest that work-family conflicts affected the level of self-reported mental health, and this relationship functioned through the two sequential mediators of negative affect and perceived stress.

  17. Work–Family Conflict and Mental Health Among Female Employees: A Sequential Mediation Model via Negative Affect and Perceived Stress

    Directory of Open Access Journals (Sweden)

    Shiyi Zhou

    2018-04-01

    Full Text Available After the implementation of the universal two-child policy in 2016, more and more working women have found themselves caught in the dilemma of whether to raise a baby or be promoted, which exacerbates work–family conflicts among Chinese women. Few studies have examined the mediating effect of negative affect. The present study combined the conservation of resources model and affective events theory to examine the sequential mediating effect of negative affect and perceived stress in the relationship between work–family conflict and mental health. A valid sample of 351 full-time Chinese female employees was recruited in this study, and participants voluntarily answered online questionnaires. Pearson correlation analysis, structural equation modeling, and multiple mediation analysis were used to examine the relationships between work–family conflict, negative affect, perceived stress, and mental health in full-time female employees. We found that women’s perceptions of both work-to-family conflict and family-to-work conflict were significant negatively related to mental health. Additionally, the results showed that negative affect and perceived stress were negatively correlated with mental health. The 95% confidence intervals indicated the sequential mediating effect of negative affect and stress in the relationship between work–family conflict and mental health was significant, which supported the hypothesized sequential mediation model. The findings suggest that work–family conflicts affected the level of self-reported mental health, and this relationship functioned through the two sequential mediators of negative affect and perceived stress.

  18. New structural family of ternary molybdates NaA3R(MoO4)5, where A is Mg, Mn, Co or Ni and R is Al, In, Cr or Fe

    International Nuclear Information System (INIS)

    Kozhevnikova, N.M.; Kotova, I.Yu

    1998-01-01

    Ternary NaA 3 R(MoO 4 ) 5 molybdates belonging to a new structural family are produced by crystallization from melted solution and by solid-phase synthesis method. NaMg 3 In(MoO 4 ) 5 , NaNi 3 Al(MoO 4 ) 5 and NaCo 3 Al(MoO 4 ) 5 single crystals are grown. Crystallographic and thermal characteristics of NaA 3 R(MoO 4 ) 5 are determined. Structural similarities in MgMoO 4 , NaIn(MoO 4 ) 2 , Na 2 Mg(MoO 4 ) 6 and NaA 3 R(MoO 4 ) 5 series are revealed [ru

  19. Business models for full service energy renovation of single-family houses in Nordic countries

    International Nuclear Information System (INIS)

    Mahapatra, Krushna; Gustavsson, Leif; Haavik, Trond; Aabrekk, Synnøve; Svendsen, Svend; Vanhoutteghem, Lies; Paiho, Satu; Ala-Juusela, Mia

    2013-01-01

    Highlights: ► In the Nordic countries there is significant primary energy saving potential in single-family houses from 1970s. ► There are several behavioral, economical and market related hindrances to adoption of energy efficiency measures. ► One-stop-shop business models to offer full service energy renovation packages are slowly emerging. ► Marketing strategies and policy measures are required to promote full service energy renovation of single-family house. - Abstract: In Nordic countries significant primary energy saving potential exists in houses built before 1980. These old houses need to be renovated, which provides an opportunity for implementation of energy efficiency measures. However, there are several economic and market hindrances and the renovation markets are dominated by handicraft-based individual solutions. In this paper we have analyzed the opportunities for implementation of one-stop-shop business models where an overall contractor offers full-service renovation packages including consulting, independent energy audit, renovation work, follow-up (independent quality control and commissioning) and financing. A comparative assessment of emerging business models in the Nordic countries shows that different types of actors can provide such a service. Financing is included in some models. There are differences in how customers are contacted, while the similarities are on how the service is provided. Even though there is strong business potential for one-stop-shop energy renovation concept, still it has been somewhat difficult to start or run such a business. Various options to overcome the hindrances to promote energy efficient renovation of detached houses are discussed

  20. Method of solving conformal models in D-dimensional space 2: A family of exactly solvable models in D > 2

    International Nuclear Information System (INIS)

    Fradkin, E.S.; Palchik, M.Ya.

    1996-02-01

    We study a family of exactly solvable models of conformally-invariant quantum field theory in D-dimensional space. We demonstrate the existence of D-dimensional analogs of primary and secondary fields. Under the action of energy-momentum tensor and conserved currents, the primary fields creates an infinite set of (tensor) secondary fields of different generations. The commutators of secondary fields with zero components of current and energy-momentum tensor include anomalous operator terms. We show that the Hilbert space of conformal theory has a special sector which structure is solely defined by the Ward identities independently on the choice of dynamical model. The states of this sector are constructed from secondary fields. Definite self-consistent conditions on the states of the latter sector fix the choice of the field model uniquely. In particular, Lagrangian models do belong to this class of models. The above self-consistent conditions are formulated as follows. Special superpositions Q s , s = 1,2,... of secondary fields are constructed. Each superposition is determined by the requirement that the form of its commutators with energy-momentum tensor and current (i.e. transformation properties) should be identical to that of a primary field. Each equation Q s (x) = 0 is consistent, and defines an exactly solvable model for D ≥ 3. The structure of these models are analogous to that of well-known two dimensional conformal models. The states Q s (x) modul 0> are analogous to the null-vectors of two dimensional theory. In each of these models one can obtain a closed set of differential equations for all the higher Green functions, as well as algebraic equations relating the scale dimension of fundamental field to the D-dimensional analog of a central charge. As an example, we present a detailed discussion of a pair of exactly solvable models in even-dimensional space D ≥ 4. (author). 28 refs

  1. Lanthanum cobalt oxides as models for La-promoted Co/{gamma}-Al{sub 2}O{sub 3} catalys

    Energy Technology Data Exchange (ETDEWEB)

    Hansteen, Ole Henrik

    1998-12-31

    Cobalt supported on {gamma}-Al{sub 2}O{sub 3} have for a long time been interesting catalysts for the synthesis of hydrocarbons by hydrogenation of carbonmonoxide, the so-called Fischer-Tropsch synthesis. The reduction and catalytic properties of these catalysts are largely improved by addition of promotors like rhenium and lanthanum. This thesis attempts to provide additional knowledge to the nature of the reduction processes from metal oxides via partially reduced phases into metal and to the large degree of interaction/reaction between the catalyst components. It focuses on detailed studies of model oxides in the La-Co-O and Co-Al-O systems under reducing conditions typically used for the synthesis of the catalysts. 132 refs., 41 figs., 16 tabs.

  2. Modelling Eu(III) speciation in a Eu(III)/PAHA/α-Al2O3 ternary system

    International Nuclear Information System (INIS)

    Janot, Noemie; Reiller, Pascal E.; Benedetti, Marc F.

    2013-01-01

    In this work, modelling of Eu(III) speciation in a ternary system, i.e., in presence of purified Aldrich humic acid (PAHA) and α-Al 2 O 3 , is presented. First, the mineral surface charge is measured by potentiometric titrations and then described using the CD-MUSIC model. This model is also used to describe Eu(III) binding to the α-Al 2 O 3 surface at different pH values, ionic strength and mineral concentrations. Time resolved luminescence spectroscopy (TRLS) is then used to study the binding of Eu(III) to PAHA at pH 4 with different humic acid concentrations. The spectra are used to calculate a spectroscopic 'titration curve', used to determine Eu(III)/PAHA binding parameters in the NICA-Donnan model. Following a previous study (Janot et al., Water Res. 46, 731-740), modelling of the ternary system is based upon the definition of two PAHA pools where one fraction remains in solution and the other is adsorbed onto the mineral surface, with each possessing different proton and metal binding parameters. The modification of protonation behaviour for both fractions is examined using spectrophotometric titrations of the non adsorbed PAHA fraction at different organic/mineral ratios. These data are then used to describe Eu(III) interactions in the ternary system: Eu(III) re-partitioning in the ternary system is calculated for different pH, ionic strength and PAHA concentrations, and results are compared to experimental observations. The model is in good agreement with experimental data, except at high PAHA fractionation rates. Results show that organic complexation dominates over a large pH range, with the predominant species existing as the surface-bound fraction. Above pH 8, Eu(III) seems to be mostly complexed to the mineral surface, which is in agreement with previous spectroscopic observations (Janot et al., Environ. Sci. Technol. 45, 3224-3230). (authors)

  3. Surface roughness prediction model in end milling of Al/SiCp MMC ...

    African Journals Online (AJOL)

    user

    2 Department of Mechanical Engineering, Pondicherry Engineering College, ... Keywords: Surface roughness (Ra), Response surface method (RSM), End milling, .... To establish the initial model and refined model, a software package MiniTab ..... The After building the regression model, a numerical optimization technique ...

  4. Evaluating the impact a proposed family planning model would have on maternal and infant mortality in Afghanistan.

    Science.gov (United States)

    Rahmani, Ahmad Masoud; Wade, Benjamin; Riley, William

    2015-01-01

    This study aimed to assess the potential impact a proposed family planning model would have on reducing maternal and infant mortality in Afghanistan. Afghanistan has a high total fertility rate, high infant mortality rate, and high maternal mortality rate. Afghanistan also has tremendous socio-cultural barriers to and misconceptions about family planning services. We applied predictive statistical models to a proposed family planning model for Afghanistan to better understand the impact increased family planning can have on Afghanistan's maternal mortality rate and infant mortality rate. We further developed a sensitivity analysis that illustrates the number of maternal and infant deaths that can be averted over 5 years according to different increases in contraceptive prevalence rates. Incrementally increasing contraceptive prevalence rates in Afghanistan from 10% to 60% over the course of 5 years could prevent 11,653 maternal deaths and 317,084 infant deaths, a total of 328,737 maternal and infant deaths averted. Achieving goals in reducing maternal and infant mortality rates in Afghanistan requires a culturally relevant approach to family planning that will be supported by the population. The family planning model for Afghanistan presents such a solution and holds the potential to prevent hundreds of thousands of deaths. Copyright © 2013 John Wiley & Sons, Ltd.

  5. Computer modelling of defect structure and rare earth doping in LiCaAlF sub 6 and LiSrAlF sub 6

    CERN Document Server

    Amaral, J B; Valerio, M E G; Jackson, R A

    2003-01-01

    This paper describes a computational study of the mixed metal fluorides LiCaAlF sub 6 and LiSrAlF sub 6 , which have potential technological applications when doped with a range of elements, especially those from the rare earth series. Potentials are derived to represent the structure and properties of the undoped materials, then defect properties are calculated, and finally solution energies for rare earth elements are calculated, enabling preferred dopant sites and charge compensation mechanisms to be predicted.

  6. Maternal warmth and toddler development: support for transactional models in disadvantaged families.

    Science.gov (United States)

    Girard, Lisa-Christine; Doyle, Orla; Tremblay, Richard E

    2017-04-01

    Studies support cognitive and social domains of development as entwined in childhood, however, there is a paucity of investigation into the nature of the mother-child relationship within an interdependence framework. Furthermore, the focus on these processes within families from impoverished communities using frequent assessments in early childhood has been limited. Our objectives were to identify (1) the directional associations between toddler's communication ability and social competence, (2) to establish whether the association between toddler's communication ability and social competence is mediated by maternal warmth, and (3) to establish support for transactional models between toddlers' outcomes and maternal warmth in disadvantaged communities in Ireland. Participants included 173 toddlers and their families enrolled in a prenatally commencing prevention programme. Toddler's communication and social competence were assessed at 12, 18, 24 and 36 months and maternal warmth at 6 and 24 months. Cross-lagged models were estimated examining multiple paths of associations simultaneously. Direct and indirect paths of maternal warmth were also examined. Bi-directional associations were found between communication ability and social competence from 12 to 24 months but not thereafter. Maternal warmth did not significantly mediate these associations, however, support of a transactional model was found with social competence. The results support early positive associations between better communication ability and social competence in the first 2 years, however, they suggest that these associations are no longer present by the third year. The role of maternal warmth in fostering social competencies is important for toddlers and equally important is toddler's level of social competence in eliciting increased maternal warmth.

  7. ALS Association

    Science.gov (United States)

    ... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

  8. Applying the effort-reward imbalance model to household and family work: a population-based study of German mothers

    Directory of Open Access Journals (Sweden)

    Sperlich Stefanie

    2012-01-01

    Full Text Available Abstract Background This paper reports on results of a newly developed questionnaire for the assessment of effort-reward imbalance (ERI in unpaid household and family work. Methods: Using a cross-sectional population-based survey of German mothers (n = 3129 the dimensional structure of the theoretical ERI model was validated by means of Confirmatory Factor Analysis (CFA. Analyses of Variance were computed to examine relationships between ERI and social factors and health outcomes. Results CFA revealed good psychometric properties indicating that the subscale 'effort' is based on one latent factor and the subscale 'reward' is composed of four dimensions: 'intrinsic value of family and household work', 'societal esteem', 'recognition from the partner', and 'affection from the child(ren'. About 19.3% of mothers perceived lack of reciprocity and 23.8% showed high rates of overcommitment in terms of inability to withdraw from household and family obligations. Socially disadvantaged mothers were at higher risk of ERI, in particular with respect to the perception of low societal esteem. Gender inequality in the division of household and family work and work-family conflict accounted most for ERI in household and family work. Analogous to ERI in paid work we could demonstrate that ERI affects self-rated health, somatic complaints, mental health and, to some extent, hypertension. Conclusions The newly developed questionnaire demonstrates satisfied validity and promising results for extending the ERI model to household and family work.

  9. Applying the effort-reward imbalance model to household and family work: a population-based study of German mothers.

    Science.gov (United States)

    Sperlich, Stefanie; Peter, Richard; Geyer, Siegfried

    2012-01-06

    This paper reports on results of a newly developed questionnaire for the assessment of effort-reward imbalance (ERI) in unpaid household and family work. Using a cross-sectional population-based survey of German mothers (n = 3129) the dimensional structure of the theoretical ERI model was validated by means of Confirmatory Factor Analysis (CFA). Analyses of Variance were computed to examine relationships between ERI and social factors and health outcomes. CFA revealed good psychometric properties indicating that the subscale 'effort' is based on one latent factor and the subscale 'reward' is composed of four dimensions: 'intrinsic value of family and household work', 'societal esteem', 'recognition from the partner', and 'affection from the child(ren)'. About 19.3% of mothers perceived lack of reciprocity and 23.8% showed high rates of overcommitment in terms of inability to withdraw from household and family obligations. Socially disadvantaged mothers were at higher risk of ERI, in particular with respect to the perception of low societal esteem. Gender inequality in the division of household and family work and work-family conflict accounted most for ERI in household and family work. Analogous to ERI in paid work we could demonstrate that ERI affects self-rated health, somatic complaints, mental health and, to some extent, hypertension. The newly developed questionnaire demonstrates satisfied validity and promising results for extending the ERI model to household and family work.

  10. Can mt2 much-gt mb2 arise from small corrections in four-family models

    International Nuclear Information System (INIS)

    Mendel, R.R.; Margolis, B.; Therrien, E.; Valin, P.

    1989-01-01

    This paper proposes a general dynamical scheme capable of explaining naturally the main properties of the observed spectrum, namely the strong inter-family mass hierarchies and the mixing pattern. The authors illustrate these properties in the three-family case with a simple toy model. There is an indication that large values of m t may be required in order to obtain |V by |much-lt|V bc ; the fact the m 2 much-gt m 2 could be due to small corrections in a four-family model where m' ∼ m'. The authors point out possible natural explanations for the small mass of the e, μ and τ neutrinos in the three and four family cases

  11. Family problems

    International Nuclear Information System (INIS)

    Goldman, T.

    1984-01-01

    Even Grand Unified Theories may not explain the repetitive pattern of fermions in the Standard Model. The abysmal absence of dynamical information about these ''families'' is emphasized. The evidence that family quantum numbers exist, and are not conserved, is reviewed. It is argued that rare kaon decays may be the best means to obtain more information on this important question

  12. Family problems

    International Nuclear Information System (INIS)

    Goldman, T.

    1984-01-01

    Even Grand Unified Theories may not explain the repetitive pattern of fermions in the Standard Model. The abysmal absence of dynamical information about these families is emphasized. The evidence that family quantum numbers exist, and are not conserved, is reviewed. It is argued that rare kaon decays may be the best means to obtain more information on this important question

  13. Measured body composition and geometrical data of four ``virtual family'' members for thermoregulatory modeling

    Science.gov (United States)

    Xu, Xiaojiang; Rioux, Timothy P.; MacLeod, Tynan; Patel, Tejash; Rome, Maxwell N.; Potter, Adam W.

    2017-03-01

    The purpose of this paper is to develop a database of tissue composition, distribution, volume, surface area, and skin thickness from anatomically correct human models, the virtual family. These models were based on high-resolution magnetic resonance imaging (MRI) of human volunteers, including two adults (male and female) and two children (boy and girl). In the segmented image dataset, each voxel is associated with a label which refers to a tissue type that occupies up that specific cubic millimeter of the body. The tissue volume was calculated from the number of the voxels with the same label. Volumes of 24 organs in body and volumes of 7 tissues in 10 specific body regions were calculated. Surface area was calculated from the collection of voxels that are touching the exterior air. Skin thicknesses were estimated from its volume and surface area. The differences between the calculated and original masses were about 3 % or less for tissues or organs that are important to thermoregulatory modeling, e.g., muscle, skin, and fat. This accurate database of body tissue distributions and geometry is essential for the development of human thermoregulatory models. Data derived from medical imaging provide new effective tools to enhance thermal physiology research and gain deeper insight into the mechanisms of how the human body maintains heat balance.

  14. Probabilistic modeling of fatigue crack growth in Ti-6Al-4V

    International Nuclear Information System (INIS)

    Soboyejo, W.O.; Shen, W.; Soboyejo, A.B.O.

    2001-01-01

    This paper presents the results of a combined experimental and analytical study of the probabilistic nature of fatigue crack growth in Ti-6Al-4V. A simple experimental fracture mechanics framework is presented for the determination of statistical fatigue crack growth parameters from two fatigue tests. The experimental studies show that the variabilities in long fatigue crack growth rate data and the Paris coefficient are well described by the log-normal distributions. The variabilities in the Paris exponent are also shown to be well characterized by a normal distribution. The measured statistical distributions are incorporated into a probabilistic fracture mechanics framework for the estimation of material reliability. The implications of the results are discussed for the probabilistic analysis of fatigue crack growth in engineering components and structures. (orig.)

  15. Numerical study of different conduction models for Al_2O_3-water nanofluid with variable properties inside a trapezoidal enclosure

    International Nuclear Information System (INIS)

    Arani, Ali Akbar Abbasian; Azemati, Ali Akbar; Rezaee, Mohammad; Hadavand, Behzad Shirkavand

    2017-01-01

    Natural convection in enclosures containing nanofluids is important in physical and environmental applications. Different models for conduction have been developed because of the importance of this phenomenon in natural convection in enclosures. In this study, effects of conduction models of Chon, Corcione, Khanafer, and Koo and Kleinstreuer on the natural convection inside a trapezoidal enclosure with hot and cold walls are evaluated numerically. The enclosure contains Al_2O_3-water nanofluid with variable properties. Effects of the conduction models on fluid flow, natural convection, variations in volume fraction, and diameter of nanoparticles in the models, as well as the variations in the Rayleigh number, are examined. Results show that at Rayleigh numbers of 105 and 106, the maximum and minimum values of the average Nusselt number are obtained using the models of Khanafer and Chon, respectively. In all models, the average Nusselt number presents upward and downward trends when the volume fraction of nanoparticles increases but decreases when the di- ameter of the nanoparticles increases. At Ra = 105 in all models, as the volume fraction of nanoparticles increases, the nanofluid provides a higher average Nusselt number compared with the base fluid. By contrast, at Ra = 106, at volume fractions larger than 0.01 and using the model of Chon, the average Nusselt number of the nanofluid is lower compared with that of the base fluid.

  16. Evaluation on the Effect of Composition on Radiation Hardening and Embrittlement in Model FeCrAl Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Field, Kevin G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Briggs, Samuel A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Edmondson, Philip [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hu, Xunxiang [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Littrell, Kenneth C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howard, Richard [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Parish, Chad M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yamamoto, Yukinori [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-18

    This report details the findings of post-radiation mechanical testing and microstructural characterization performed on a series of model and commercial FeCrAl alloys to assist with the development of a cladding technology with enhanced accident tolerance. The samples investigated include model alloys with simple ferritic grain structure and two commercial alloys with minor solute additions. These samples were irradiated in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) up to nominal doses of 7.0 dpa near or at Light Water Reactor (LWR) relevant temperatures (300-400 C). Characterization included a suite of techniques including small angle neutron scattering (SANS), atom probe tomography (APT), and transmission based electron microscopy techniques. Mechanical testing included tensile tests at room temperature on sub-sized tensile specimens. The goal of this work was to conduct detailed characterization and mechanical testing to begin establishing empirical and/or theoretical structure-property relationships for radiation-induced hardening and embrittlement in the FeCrAl alloy class. Development of such relationships will provide insight on the performance of FeCrAl alloys in an irradiation environment and will enable further development of the alloy class for applications within a LWR environment. A particular focus was made on establishing trends, including composition and radiation dose. The report highlights in detail the pertinent findings based on this work. This report shows that radiation hardening in the alloys is primarily composition dependent due to the phase separation in the high-Cr FeCrAl alloys. Other radiation induced/enhanced microstructural features were less dependent on composition and when observed at low number densities, were not a significant contributor to the observed mechanical responses. Pre-existing microstructure in the alloys was found to be important, with grain boundaries and pre-existing dislocation

  17. Spectral shape of sea level muons derived from the model of Bull et al using ISR results on kaon-pion ratio

    CERN Document Server

    Bhattacharya, D P; Choudhury, B

    1978-01-01

    The diffusion model developed by Bull et al. (1965) is used to calculate the sea-level spectra in the energy range 5-650 GeV. Experimental values taken for the K/ pi ratio are those produced by the CERN Intersecting Storage Rings, (Antinucci et al., 1973).

  18. Simulation of debonding in Al/epoxy T-peel joints using a potential-based cohesive zone model

    KAUST Repository

    Alfano, Marco; Furgiuele, Franco; Lubineau, Gilles; Paulino, Glaucio H.

    2011-01-01

    In this work, a cohesive zone model of fracture is employed to study debonding in plastically deforming Al/epoxy T-peel joints. In order to model the adhesion between the bonded metal strips, the Park-Paulino-Roesler (PPR) potential based cohesive model (J Mech Phys Solids, 2009;57:891-908) is employed, and interface elements are implemented in a finite element com-mercial code. A study on the influence of the cohesive properties (i.e. cohesive strength, fracture energy, shape parameter and slope indicator) on the predicted peel-force versus displacement plots reveals that the numerical results are mostly sensitive to cohesive strength and fracture energy. In turn, these parameters are tuned until a match between experimental and simulated load displacement curves is achieved.

  19. Simulation of debonding in Al/epoxy T-peel joints using a potential-based cohesive zone model

    KAUST Repository

    Alfano, Marco

    2011-06-10

    In this work, a cohesive zone model of fracture is employed to study debonding in plastically deforming Al/epoxy T-peel joints. In order to model the adhesion between the bonded metal strips, the Park-Paulino-Roesler (PPR) potential based cohesive model (J Mech Phys Solids, 2009;57:891-908) is employed, and interface elements are implemented in a finite element com-mercial code. A study on the influence of the cohesive properties (i.e. cohesive strength, fracture energy, shape parameter and slope indicator) on the predicted peel-force versus displacement plots reveals that the numerical results are mostly sensitive to cohesive strength and fracture energy. In turn, these parameters are tuned until a match between experimental and simulated load displacement curves is achieved.

  20. Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition

    Science.gov (United States)

    Klusemann, Benjamin; Bambach, Markus

    2018-05-01

    Processing conditions play a crucial role for the resulting microstructure and properties of the material. In particular, processing materials under non-equilibrium conditions can lead to a remarkable improvement of the final properties [1]. Additive manufacturing represents a specific process example considered in this study. Models for the prediction of residual stresses and microstructure in additive manufacturing processes, such as laser metal deposition, are being developed with huge efforts to support the development of materials and processes as well as to support process design [2-4]. Since the microstructure predicted after each heating and cooling cycle induced by the moving laser source enters the phase transformation kinetics and microstucture evolution of the subsequent heating and cooling cycle, a feed-back loop for the microstructure calculation is created. This calculation loop may become unstable so that the computed microstructure and related properties become very sensitive to small variations in the input parameters, e.g. thermal conductivity. In this paper, a model for phase transformation in Ti-6Al-4V, originally proposed by Charles Murgau et al. [5], is adopted and minimal adjusted concerning the decomposition of the martensite phase are made. This model is subsequently used to study the changes in the predictions of the different phase volume fractions during heating and cooling under the conditions of laser metal deposition with respect to slight variations in the thermal process history.

  1. Formation of bands of ultrafine beryllium particles during rapid solidification of Al-Be alloys: Modeling and direct observations

    International Nuclear Information System (INIS)

    Elmer, J.W.; Tanner, L.E.; Smith, P.M.; Wall, M.A.; Aziz, M.J.

    1994-01-01

    Rapid solidification of dilute hyper-eutectic and monotectic alloys sometimes produces a dispersion of ultrafine randomly-oriented particles that lie in arrays parallel to the advancing solidification front. The authors characterize this effect in Al-Be where Be-rich particles with diameters on the order of 10 nm form in arrays spaced approximately 25 nm apart, and they present a model of macroscopically steady state but microscopically oscillatory motion of the solidification front to explain this unusual microstructure. The proposed mechanism involves; (i) the build-up of rejected solute in a diffusional boundary layer which slows down the growing crystal matrix, (2) the boundary layer composition entering a metastable liquid miscibility gap, (3) homogeneous nucleation of solute rich liquid droplets in the boundary layer, and crystallization of these droplets, and (4) growth of the matrix past the droplets and its reformation into a planar interface. The size of the Be-rich particles is limited by the beryllium supersaturation in the diffusional boundary layer. A numerical model was developed to investigate this solidification mechanism, and the results of the model are in good agreement with experimental observations of rapidly solidified Al-5 at.% Be

  2. Simulation of spheroidisation of elongated Si-particle in Al-Si alloys by the phase-field model

    International Nuclear Information System (INIS)

    Kovacevic, I.

    2008-01-01

    The application of the phase-field model for spheroidisation of undissolvable particles during high-temperature treatment of alloys is pointed out. Modelling of the spheroidisation of elongated Si-particles during annealing of Al-Si alloy is elaborated in this paper. The driving force for spheroidisation is the minimization of the total free-energy of the system or the minimization of the ratio between the interface areas and the particle volumes. The spheroidisation kinetics of elongated Si-particle for binary Al-Si system during homogenisation of aluminium alloys simulated by the phase-field model is demonstrated. The influences of the interface energy and the homogenisation temperature on the spheroidisation kinetics is presented. The lack of knowledge of the interface energy anisotropy between Si-particle and the aluminium phase is the only reason for using isotropic interface energy in simulations. The thermodynamic driving force for the phase transformation of the silicon into the aluminium phase is computed from the data obtained from the JMatPro software for aluminium alloys

  3. Modeling of High Temperature Oxidation Behavior of FeCrAl Alloy by using Artificial Neural Network

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Joon; Ryu, Ho Jin [KAIST, Daejeon (Korea, Republic of)

    2016-10-15

    Refractory alloys are candidate materials for replacing current zirconium-base cladding of light water reactors and they retain significant creep resistance and mechanical strength at high temperatures up to 1500 ℃ due to their high melting temperature. Thermal neutron cross sections of refractory metals are higher than that of zirconium, however the loss of neutron can be overcome by reducing cladding thickness which can be facilitated with enhanced mechanical properties. However, most refractory metals show the poor oxidation resistance at a high temperature. Oxidation behaviors of the various compositions of FeCrAl alloys in high temperature conditions were modeled by using Bayesian neural network. The automatic relevance determination (ARD) technique represented the influence of the composition of alloying elements on the oxidation resistance of FeCrAl alloys. This model can be utilized to understand the tendency of oxidation behavior along the composition of each element and prove the applicability of neural network modeling for the development of new cladding material of light water reactors.

  4. Pressure effects on martensitic transformation under quenching process in a molecular dynamics model of NiAl alloy

    International Nuclear Information System (INIS)

    Kazanc, S.; Ozgen, S.; Adiguzel, O.

    2003-01-01

    The solid-solid phase transitions in NiAl alloys occur by the temperature changes and application of a pressure on the system. Both types of transitions are called martensitic transformation and have displacive and thermoelastic characters. Pressure effects on thermoelastic transformation in Ni 62.5 Al 37.5 alloy model have been studied by means of molecular dynamics method proposed by Parrinello-Rahman. Interaction forces between atoms in the model system were calculated by Lennard-Jones potential energy function. Thermodynamics and structural analysis of the martensitic transformations under hydrostatic pressure during the quenching processes have been performed. The simulation runs have been carried out in different hydrostatic pressures changing from zero to 40.65 GPa during the quenching process of the model alloy. At the zero and nonzero pressures, the system with B2-type ordered structure undergoes the product phase with L1 0 -type ordered structure by Bain distortion in the first step of martensitic transformation under the quenching process. The increase in hydrostatic pressure causes decrease in the formation time of the product phase, and twin-like lattice distortion is observed in low temperature L1 0 phase

  5. Diffusion model analyses of the experimental data of /sup 12/C+/sup 27/Al, /sup 40/Ca dissipative collisions

    Energy Technology Data Exchange (ETDEWEB)

    Weng-qing, SHEN; Wei-men, QIAO; Yong-tai, ZHU; Wen-long, ZHAN

    1984-11-01

    Assuming that the intermediate system decays with a statistical lifetime, the general behavior of the threefold differential cross section d/sup 3/sigma/dZEdtheta in the dissipative collisions of 68 MeV /sup 12/C+/sup 27/Al and 68.6 MeV /sup 12/C+/sup 40/Ca system are analyzed in the diffusion model framework. The lifetime of the intermediate system and the separation distance for the completely damped deep inelastic component are obtained. The calculated results and the experimental data of the angular distributions and Wilczynski plots are compared. The probable reasons of the differences between them are briefly discussed.

  6. Kinematografische Propaganda und Zensur in Österreich-Ungarn von 1914–1918 als gescheitertes kybernetisches Modell

    Directory of Open Access Journals (Sweden)

    Paul Winkler

    2014-12-01

    Full Text Available (Medien-Pädagogik, verstanden als Medienverbund zur programmierten "Unterrichtung" einer breiten Masse wurde bereits vor 1914 erfahren. Zweifelsohne kam es jedoch während dem Ersten Weltkrieg zu einer intensiven Orchestrierung der zur Verfügung stehenden Medien. Die angestrebte Volkserziehung kann dabei als kybernetisches Regelkreismodell betrachtet werden. Als ganz spezielles systemimmanentes Instrument, stellte sich dabei das Kino heraus. Anfangs etwas zögerlich, verstand man es mit Verlauf des Krieges auch in der Donaumonarchie, die Möglichkeiten der bewegten Bilder immer umfassender auszunützen. Das Kino sollte als Regler, dem Publikum Führungsgrößen vor Augen führen und das einzelne Individuum gleichzeitig zu einer Art Selbstregulation auffordern. Vorstellungs- und Wertewelten der Menschen sollten homogenisiert werden und das System in dieser Weise stabilisieren. Offenes Feedback war unerwünscht; Grundstimmungen und Diskurse innerhalb der Bevölkerung blieben jedoch nicht unbemerkt und wurden auf der Leinwand bearbeitet, wobei begründete Befürchtungen, Zweifel und Ängste, zu entkräften versucht wurden. Mit fortschreitender Kriegsdauer taten sich Zensur und Propaganda immer schwerer, ein geschöntes Bild der Situation glaubhaft darzustellen. Schließlich vermochte das Flimmern der Leinwände, die Botschaften des Systems nicht mehr zu vermitteln. Das kybernetische Modell der Volkserziehung über Kamera und Leinwand, welches die Gesellschaft militärisch überprägte, Überlegenheit predigte, Gewalt normalisierte und das kriegsbedingte Sterben humanisierte, musste letztlich scheitern. Der vorliegende Artikel soll einen kurzen Einblick in den Aufbau dieses – letztlich gescheiterten – regulativen Werkes der kinematografischen Propaganda und Zensur in Österreich-Ungarn geben, wobei der Fokus auf der dokumentarischen Berichterstattung vom Krieg liegt, die eine vermeintliche Realität repräsentieren sollte.

  7. Wild-type and A315T mutant TDP-43 exert differential neurotoxicity in a Drosophila model of ALS

    Science.gov (United States)

    Estes, Patricia S.; Boehringer, Ashley; Zwick, Rebecca; Tang, Jonathan E.; Grigsby, Brianna; Zarnescu, Daniela C.

    2011-01-01

    The RNA-binding protein TDP-43 has been linked to amyotrophic lateral sclerosis (ALS) both as a causative locus and as a marker of pathology. With several missense mutations being identified within TDP-43, efforts have been directed towards generating animal models of ALS in mouse, zebrafish, Drosophila and worms. Previous loss of function and overexpression studies have shown that alterations in TDP-43 dosage recapitulate hallmark features of ALS pathology, including neuronal loss and locomotor dysfunction. Here we report a direct in vivo comparison between wild-type and A315T mutant TDP-43 overexpression in Drosophila neurons. We found that when expressed at comparable levels, wild-type TDP-43 exerts more severe effects on neuromuscular junction architecture, viability and motor neuron loss compared with the A315T allele. A subset of these differences can be compensated by higher levels of A315T expression, indicating a direct correlation between dosage and neurotoxic phenotypes. Interestingly, larval locomotion is the sole parameter that is more affected by the A315T allele than wild-type TDP-43. RNA interference and genetic interaction experiments indicate that TDP-43 overexpression mimics a loss-of-function phenotype and suggest a dominant-negative effect. Furthermore, we show that neuronal apoptosis does not require the cytoplasmic localization of TDP-43 and that its neurotoxicity is modulated by the proteasome, the HSP70 chaperone and the apoptosis pathway. Taken together, our findings provide novel insights into the phenotypic consequences of the A315T TDP-43 missense mutation and suggest that studies of individual mutations are critical for elucidating the molecular mechanisms of ALS and related neurodegenerative disorders. PMID:21441568

  8. Modeling and simulation of deformation and fracture behavior of components made of fully lamellar {gamma}TiAl alloy

    Energy Technology Data Exchange (ETDEWEB)

    Kabir, Mohammad Rizviul [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Materialforschung

    2008-07-01

    The present work deals with the modeling and simulation of deformation and fracture behavior of fully lamellar {gamma}TiAl alloy; focusing on understanding the variability of local material properties and their influences on translamellar fracture. Afracture model has been presented that takes the inhomogeneity of the local deformation behavior of the lamellar colonies as well as the variability in fracture strength and toughness into consideration. To obtain the necessary model parameters, a hybrid methodology of experiments and simulations has been adopted. The experiments were performed at room temperature that demonstrates quasi-brittle response of the TiAl polycrystal. Aremarkable variation in stress-strain curves has been found in the tensile tests. Additional fracture tests showed significant variations in crack initiation and propagation during translamellar fracture. Analyzing the fracture surfaces, the micromechanical causes of these macroscopic scatter have been explained. The investigation shows that the global scatter in deformation and fracture response is highly influenced by the colony orientation and tilting angle with respect to the loading axis. The deformation and fracture behavior have been simulated by a finite element model including the material decohesion process described by a cohesive model. In order to capture the scatter of the macroscopic behavior, a stochastic approach is chosen. The local variability of stressstrain in the polycrystal and the variability of fracture parameters of the colonies are implemented in the stochastic approach of the cohesive model. It has been shown that the proposed approach is able to predict the stochastic nature of crack initiation and propagation as observed from the experiments. The global specimen failure with stable or unstable crack propagation can be explained in terms of the local variation of material properties. (orig.)

  9. Personhood-Based Dementia Care: Using the Familial Caregiver as a Bridging Model for Professional Caregivers

    Directory of Open Access Journals (Sweden)

    Michael Gabriel Fetterolf

    2015-05-01

    Full Text Available With biomedicine at the forefront of our culture's understanding of illness, true healing is often neglected. It has become common practice to place elderly persons with Alzheimer's disease in nursing homes or long-term care facilities that do not always regard the sufferers' well-being as a top priority. This article draws from familial caregiving roles as a basis for understanding personhood, which I take to be a bridge between the world of a caregiver and the world of an Alzheimer's sufferer. Furthermore, through the modeling of professional caregiving strategies, I show how one might form meaningful relationships in long-term care facilities, and likewise provide the aging and afflicted person with forms of healing.

  10. Social relations model analyses of perceived self-control and trust in families

    NARCIS (Netherlands)

    Büyükcan Tetik, A.; Finkenauer, C.; Siersema, M.; Vander Heyden, K.; Krabbendam, L.

    2015-01-01

    How do people know which family member is trustworthy? In this study, the authors tested the hypothesis that people use their perception of a family member's self-control as an indicator of his or her trustworthiness. Eighty-four Dutch families consisting of 2 parents and 2 children completed

  11. Evaluation of This Process on Healt Indicators of 11 Provinces Practicing Model of Family Medicine Firstly

    Directory of Open Access Journals (Sweden)

    Nasir Nesanir

    2010-10-01

    Full Text Available AIM: The aim of This study is to eveluata the process On Healt Indicator In Between 2000 and 2007 years. Of 11 provinces practicing model of Family Medicine firstly. METHOD: This observational-descriptive study was made in May-June 2008 On Healt Indicator Of 11 provincespracticed the model of Family Medicine at least for a year. It vas taken through the Ministry of Health 20 Health Indicators belonging to the years 2000 and 2007 Of these provinces and also we benefited from data in annual studies from 2000 to 2006 of General Directorate of Primary Health Care of the Ministry of Health. RESULTS: There were. 3496 physicians and 6075 nurses, midwives in 2007 when 2677 physicians and 6042 nurse midwives were working in 2005 in 11 provinces. It was 90% in 2006 while immunization of DBT3 in 0 aged group was 80% in 2000 In 81 provinces , It was 92% and 90% in 11 provinces immunization of DBT3 in 0 aged group for the same years. Follow-up per number of pregnant women in Duzce in 2000 was 1.9 and it was 2.7 in 2005, it was 3.7in 2007. During the same years in Edirne the numbers were 9.0, 11.0, 4.6. Follow-up per number of confined in Eskisehir in 2000 was 1.2 and it was 2.1 in 2005 and it was 1.5 in 2007. in Izmir during the same years the numbers were 1.9, 2.4 and 2.2. In Duzce, the number of the observation per infant was 4.0 in 2000 and it was 7.7 in 2005 and it was 10.2 in 2007. In Eskisehir during the same year the numbers were 5.9, 9.4, 7.9. CONCLUSION: the number of physicians in primary care with this application has increased. In health-level indicators family medicine or primary health care services distinction is not whether the payment per service is deemed to be more specific. To better assess the health status indicators, field studies should be performed. [TAF Prev Med Bull 2010; 9(5.000: 493-504

  12. Gender and work-family conflict: testing the rational model and the gender role expectations model in the Spanish cultural context.

    Science.gov (United States)

    Calvo-Salguero, Antonia; Martínez-de-Lecea, José-María Salinas; del Carmen Aguilar-Luzón, María

    2012-01-01

    Gutek, Searle, and Klepa (1991) proposed two models to explain the gender differences in work-family conflict: the rational model and the gender role expectations model. Both models have mostly been tested on American and Canadian samples, and have obtained partial support. Given the cultural differences between North American countries and Spain, we should question whether the two models are equally applicable to Spanish society or whether one of them captures Spanish men and women's experience of work-family conflict better than the other. So, the aim of this study is to test which of the models better explains the gender differences in work-family conflict in the Spanish cultural context (or if, indeed, the two models apply equally well). Given the typical cultural dimensions of Spanish society, we expected to find greater support for the gender role expectations model than for the rational model. However, the results obtained in this study indicated that, while the rational model can explain the gender differences that were found, the gender role expectations model cannot capture Spanish people's work-family conflict experiences. The results are interpreted in terms of cultural dimensions characteristic of the Spanish context.

  13. Supporting frail seniors through a family physician and Home Health integrated care model in Fraser Health

    Directory of Open Access Journals (Sweden)

    Grace Haeson Park

    2014-03-01

    Full Text Available Background: A major effort is underway to integrate primary and community care in Canada's western province of British Columbia and in Fraser Health, its largest health authority. Integrated care is a critical component of Fraser Health's planning, to meet the challenges of caring for a growing, elderly population that is presenting more complex and chronic medical conditions. Description of integrated practice: An integrated care model partners family physicians with community-based home health case managers to support frail elderly patients who live at home. It is resulting in faster response times to patient needs, more informed assessments of a patient's state of health and pro-active identification of emerging patient issues. Early results: The model is intended to improve the quality of patient care and maintain the patients’ health status, to help them live at home confidently and safely, as long as possible. Preliminary pilot data measuring changes in home care services is showing positive trends when it comes to extending the length of a person's survival/tenure in the community (living in their home vs. admitted to residential care or deceased. Conclusion: Fraser Health's case manager–general practitioner partnership model is showing promising results including higher quality, appropriate, coordinated and efficient care; improved patient, caregiver and physician interactions with the system; improved health and prevention of acute care visits by senior adult patients.

  14. Understanding the effect models of ionic liquids in the synthesis of NH4-Dw and γ-AlOOH nanostructures and their conversion into porous γ-Al2O3.

    Science.gov (United States)

    Duan, Xiaochuan; Kim, Tongil; Li, Di; Ma, Jianmin; Zheng, Wenjun

    2013-05-03

    Well-dispersed ammonium aluminum carbonate hydroxide (NH4-Dw) and γ-AlOOH nanostructures with controlled morphologies have been synthesized by employing an ionic-liquid-assisted hydrothermal process. The basic strategies that were used in this work were: 1) A controllable phase transition from NH4-Dw to γ-AlOOH could be realized by increasing the reaction temperature and 2) the morphological evolution of NH4-Dw and γ-AlOOH nanostructures could be influenced by the concentration of the ionic liquid. Based on these experimental results, the main objective of this work was to clarify the effect models of the ionic liquids on the synthesis of NH4-Dw and γ-AlOOH nanostructures, which could be divided into cationic- or anionic-dominant effect models, as determined by the different surface structures of the targets. Specifically, under the cationic-dominant regime, the ionic liquids mainly showed dispersion effects for the NH4-Dw nanostructures, whereas the anionic-dominant model could induce the self-assembly of the γ-AlOOH particles to form hierarchical structures. Under the guidance of the proposed models, the effect of the ionic liquids would be optimized by an appropriate choice of cations or anions, as well as by considering the different effect models with the substrate surface. We expect that such effect models between ionic liquids and the target products will be helpful for understanding and designing rational ionic liquids that contain specific functional groups, thus open up new opportunities for the synthesis of inorganic nanomaterials with new morphologies and improved properties. In addition, these as-prepared NH4-Dw and γ-AlOOH nanostructures were converted into porous γ-Al2O3 nanostructures by thermal decomposition, whilst preserving the same morphology. By using HRTEM and nitrogen-adsorption analysis, the obtained γ-Al2O3 samples were found to have excellent porous properties and, hence, may have applications in catalysis and adsorption

  15. Modeling of full-Heusler alloys within tight-binding approximation: Case study of Fe2MnAl

    Science.gov (United States)

    Azhar, A.; Majidi, M. A.; Nanto, D.

    2017-07-01

    Heusler alloys have been known for about a century, and predictions of magnetic moment values using Slater-Pauling rule have been successful for many such materials. However, such a simple counting rule has been found not to always work for all Heusler alloys. For instance, Fe2CuAl has been found to have magnetic moment of 3.30 µB per formula unit although the Slater-Pauling rule suggests the value of 2 µB. On the other hand, a recent experiment shows that a non-stoichiometric Heusler compound Fe2Mn0.5Cu0.5Al possesses magnetic moment of 4 µB, closer to the Slater-Pauling prediction for the stoichiometric compound. Such discrepancies signify that the theory to predict the magnetic moment of Heusler alloys in general is still far from being complete. Motivated by this issue, we propose to do a theoretical study on a full-Heusler alloy Fe2MnAl to understand the formation of magnetic moment microscopically. We model the system by constructing a density-functional-theory-based tight-binding Hamiltonian and incorporating Hubbard repulsive as well as spin-spin interactions for the electrons occupying the d-orbitals. Then, we solve the model using Green's function approach, and treat the interaction terms within the mean-field approximation. At this stage, we aim to formulate the computational algorithm for the overall calculation process. Our final goal is to compute the total magnetic moment per unit cell of this system and compare it with the experimental data.

  16. Biome-BGC: Modeling Effects of Disturbance and Climate (Thornton et al. 2002)

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: This archived model product contains the directions, executables, and procedures for running Biome-BGC, Version 4.1.1, to recreate the results of the...

  17. Biome-BGC: Modeling Carbon Dynamics in Ponderosa Pine Stands (Law et al. 2003)

    Data.gov (United States)

    National Aeronautics and Space Administration — This archived model product contains the directions, executables, and procedures for running Biome-BGC, Version 4.1.2, to recreate the results of the following...

  18. Complete genome sequence of N2-fixing model strain Klebsiella sp. nov. M5al, which produces plant cell wall-degrading enzymes and siderophores

    Directory of Open Access Journals (Sweden)

    Zhili Yu

    2018-03-01

    Full Text Available The bacterial strain M5al is a model strain for studying the molecular genetics of N2-fixation and molecular engineering of microbial production of platform chemicals 1,3-propanediol and 2,3-butanediol. Here, we present the complete genome sequence of the strain M5al, which belongs to a novel species closely related to Klebsiella michiganensis. M5al secretes plant cell wall-degrading enzymes and colonizes rice roots but does not cause soft rot disease. M5al also produces siderophores and contains the gene clusters for synthesis and transport of yersiniabactin which is a critical virulence factor for Klebsiella pathogens in causing human disease. We propose that the model strain M5al can be genetically modified to study bacterial N2-fixation in association with non-legume plants and production of 1,3-propanediol and 2,3-butanediol through degradation of plant cell wall biomass.

  19. Mental Models of Cause and Inheritance for Type 2 Diabetes Among Unaffected Individuals Who Have a Positive Family History.

    Science.gov (United States)

    Daack-Hirsch, Sandra; Shah, Lisa L; Cady, Alyssa D

    2018-03-01

    Using the familial risk perception (FRP) model as a framework, we elicited causal and inheritance explanations for type 2 diabetes (T2D) from people who do not have T2D but have a family history for it. We identified four composite mental models for cause of T2D: (a) purely genetic; (b) purely behavioral/environmental; (c) direct multifactorial, in which risk factors interact and over time directly lead to T2D; and (d) indirect multifactorial, in which risk factors interact and over time cause a precursor health condition (such as obesity or metabolic syndrome) that leads to T2D. Interestingly, participants described specific risk factors such as genetics, food habits, lifestyle, weight, and culture as "running in the family." Our findings provide insight into lay beliefs about T2D that can be used by clinicians to anticipate or make sense of responses to questions they pose to patients about mental models for T2D.

  20. Emission of Gas and Al2O3 Smoke in Gas-Al Particle Deflagration: Experiments and Emission Modeling for Explosive Fireballs

    Science.gov (United States)

    Ranc-Darbord, Isabelle; Baudin, Gérard; Genetier, Marc; Ramel, David; Vasseur, Pierre; Legrand, Julien; Pina, Vincent

    2018-03-01

    Emission of gas and Al2O3 smoke within the deflagration of H2{-}O2-{N2{-}CO2}-Al particles has been studied in a closed combustion chamber at pressures of up to 18 bar and at gas temperatures of up to 3700 K. Measurements of radiance intensity were taken using a five wavelength pyrometer (0.660 μ m, 0.850 μ m, 1.083 μ m, 1.260 μ m, 1.481 μ m) and a grating spectrometer in the range (4.10 μ m to 4.30 μ m). In order to characterize the aluminum oxide smoke size and temperature, an inversion method has been developed based on the radiation transfer equation and using pyrometer measurements and thermochemical calculations of Al2O3 smoke volume fractions. Temperatures in combustion gas have been determined using a method based on the assumed blackbody head of the 4.26 μ m CO2 emission line and on its spectral shift with pressure and temperature. For validation purpose, this method has been applied to measurements obtained when calibrated alumina particles are injected in a combustion chamber prior to gaseous deflagrations. This mathematical inversion method was developed to investigate explosive fireballs.