Neutrino Factory

CERN Document Server

Bogomilov, M; Tsenov, R; Dracos, M; Bonesini, M; Palladino, V; Tortora, L; Mori, Y; Planche, T; Lagrange, J  B; Kuno, Y; Benedetto, E; Efthymiopoulos, I; Garoby, R; Gilardoini, S; Martini, M; Wildner, E; Prior, G; Blondel, A; Karadzhow, Y; Ellis, M; Kyberd, P; Bayes, R; Laing, A; Soler, F  J  P; Alekou, A; Apollonio, M; Aslaninejad, M; Bontoiu, C; Jenner, L  J; Kurup, A; Long, K; Pasternak, J; Zarrebini, A; Poslimski, J; Blackmore, V; Cobb, J; Tunnell, C; Andreopoulos, C; Bennett, J  R  J; Brooks, S; Caretta, O; Davenne, T; Densham, C; Edgecock, T  R; Fitton, M; Kelliher, D; Loveridge, P; McFarland, A; Machida, S; Prior, C; Rees, G; Rogers, C; Rooney, M; Thomason, J; Wilcox, D; Booth, C; Skoro, G; Back, J  J; Harrison, P; Berg, J  S; Fernow, R; Gallardo, J  C; Gupta, R; Kirk, H; Simos, N; Stratakis, D; Souchlas, N; Witte, H; Bross, A; Geer, S; Johnstone, C; Mokhov, N; Neuffer, D; Popovic, M; Strait, J; Striganov, S; Morfín, J  G; Wands, R; Snopok, P; Bogacz, S  A; Morozov, V; Roblin, Y; Cline, D; Ding, X; Bromberg, C; Hart, T; Abrams, R  J; Ankenbrandt, C  M; Beard, K  B; Cummings, M  A  C; Flanagan, G; Johnson, R  P; Roberts, T  J; Yoshikawa, C  Y; Graves, V  B; McDonald, K  T; Coney, L; Hanson, G

2014-01-01

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that $\\theta_{13} > 0$. The measured value of $\\theta_{13}$ is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable of making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti)neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO$\

Super B Factories

Indian Academy of Sciences (India)

B factory; CP violation; B meson; supersymmetry. PACS Nos 11.30.Hv; 11.30.Pb; 12.15.Hh; 12.15.Mm; 13.20.He; 13.20.Fc;. 13.35.Dx; 14.65.Fy. 1. Introduction. The two asymmetric B factories, PEP-II and KEK-B, and their companion detec- tors, BABAR and Belle, have produced a wealth of flavor physics results, subjecting.

Pentachlorophenol (PCP) sludge recycling unit

International Nuclear Information System (INIS)

1994-08-01

The Guelph Utility Pole Company treats utility poles by immersion in pentachlorophenol (PCP) or by pressure treatment with chromated copper arsenate (CCA). The PCP treatment process involves a number of steps, each producing a certain amount of sludge and other wastes. In a plant upgrading program to improve processing and treatment of poles and to reduce and recycle waste, a PCP recovery unit was developed, first as an experimental pilot-scale unit and then as a full-scale unit. The PCP recovery unit is modular in design and can be modified to suit different requirements. In a recycling operation, the sludge is pumped through a preheat system (preheated by waste heat) and suspended solids are removed by a strainer. The sludge is then heated in a tank and at a predetermined temperature it begins to separate into its component parts: oil, steam, and solids. The steam condenses to water containing low amounts of light oil, and this water is pumped through an oil/water separator. The recovered oil is reused in the wood treatment process and the water is used in the CCA plant. The oil remaining in the tank is reused in PCP treatment and the solid waste, which includes small stones and wood particles, is removed and stored. By the third quarter of operation, the recovery unit was operating as designed, processing ca 10,000 gal of sludge. This sludge yielded 6,500 gal of water, 3,500 gal of oil, and ca 30 gal of solids. Introduction of the PCP sludge recycling system has eliminated long-term storage of PCP sludge and minimized costs of hazardous waste disposal. 4 figs

The introduction of radiation monitor produced by several nuclear instrument factories

International Nuclear Information System (INIS)

Yu Liying

2005-01-01

The paper introduce some radiation monitor products of several nuclear instrument factories include Xi'an Nuclear Instrument Factory, MGP Instruments Inc, and Canberra Industries Inc. The introduction aspects include the range, configuration, and application of products. So, the paper is reference for the designer with responsibility for radiation monitoring system of new nuclear project. (authors)

Effect of coating systems on the vaporization of pentachlorophenol from treated wood

Science.gov (United States)

L. L. Ingram; G. D. McGinnis; P. M. Pope; W. C. Feist

1983-01-01

Specimens of southern pine treated with pentachlorophenol (penta) in mineral spirits (dip treatment), penta in P9 type A oil and penta in methylene chloride (pressure treatments) were used to evaluate the efficacy of different types of coatings in suppressing the vaporization of penta from treated wood. The clear film-forming coatings, such as polyurethane and alkyds,...

Changing redox potential by controlling soil moisture and addition of inorganic oxidants to dissipate pentachlorophenol in different soils

International Nuclear Information System (INIS)

Lin Jiajiang; He Yan; Xu Jianming

2012-01-01

The potential for dissipation of pentachlorophenol (PCP) was investigated in soils from four different sites in China. These were an umbraqualf (Soil 1), a Plinthudult (Soil 2), a Haplustalf (Soil 3) and an Argiustoll (Soil 4) which were either flooded, to produce anaerobic conditions, or incubated aerobically at 60% water-holding capacity (WHC). The dissipation of PCP in Soil 1 at 60% WHC was higher than under flooded condition, while the opposite occurred in the other three soils. Under flooded conditions, the redox potential decreased significantly in Soil 1 and Soil 4, where sulphate reduction was occurred and the dissipation of PCP was statistically significant (about 96% and 98%, respectively) at the end of incubation. After addition of inorganic oxidants, dissipation of PCP was significantly inhibited by FeCl 3 , while Na 2 SO 4 and NaNO 3 had different effects, depending upon the soil type. - Highlights: ► The extent of the aerobic/anaerobic interface depends upon the soil properties. ► The dissipation of PCP was accelerated in some soils due to the soil-water interface. ► The addition of oxidants inhibited the decrease in soil redox potential. ► Most external oxidants added under flooded condition inhibited PCP dechlorination. - The addition of inorganic oxidants limited the decrease in redox potential and inhibited the reductive dechlorination of pentachlorophenol.

Determination of Benzoate Level in Canned Pickles and Pickled Cucumbers in Food Producing Factories in Markazi Province and those that their Products were Sold in Arak City, Iran

Directory of Open Access Journals (Sweden)

Mostafa Delavar

2012-11-01

Full Text Available Background: Anecdotal information has suggested that sodium benzoate is used with more than permissible doses during production steps of food products especially pickles and pickled cucumbers in food producing factories in Markazi province and other food producing factories . The present study was done to evaluate factual concentration of sodium benzoate in these products. Methods: In this study, 8 samples from canned pickled cucumbers and 10 samples from canned pickles were randomly gathered from food production factories in Markazi province between March and September 2010. Also, 25 samples from canned pickled cucumbers and 15 samples from canned pickles and 7 samples of bulk cargo pickled cucumbers were collected from the other provinces in Arak city. Sodium benzoate level was determined in the samples using UV-VIS spectrophotometry method. The determined values were analyzed by N-par test using SPSS software version 16.0. Results: Sodium benzoate level was near zero in the samples of canned pickles and pickled cucumbers from producing factories. This was 200-400 PPM in 7 samples from bulk cargo pickled cucumbers which was higher than permissible dose. There was not a statistically significant difference between mean benzoate level of canned pickles and pickled cucumbers produced in Markazi providence factories and other food factories. Benzoate level was significantly higher than permissible dose in bulk cargo pickled cucumbers. Conclusion: Food products from production factories do not have higher than permissible level of sodium benzoate; however, this is higher in bulk cargo pickled cucumbers. Hence, stricter control on bulk cargo pickled cucumber products is recommended.

Removal of Pentachlorophenol Using Microwave Assisted Persulfate from Synthetic Wastewater

Directory of Open Access Journals (Sweden)

Ghorban Asgari

2014-07-01

Full Text Available Pentachlorophenol (PCP is an important class of environmental pollutants which is excessively used in industry in spite of strong evidence about its hazards. Therefore, the removal of PCP from aqua solution is recommended due to its toxicity and health risks. In the present study, the removal of PCP using a modified domestic microwave (MW oven alone and in combination with persulfate (MW/PS was investigated. The effects of operational parameters such as pH of solution, the power of microwave radiations and the amount of persulfate concentration were studied. A spectrophotometer was used for determining of the concentration of pentachlorophenol. The experimental results showed that the removal of PCP was influenced by many factors, such as the pH value, the amount of persulfate and microwave power. The optimum conditions for the best removal rate were obtained at pH=11, a persulfate concentration of 0.02mol/L and microwave irradiation power of about 600W for MW/PS system at constant PCP concentration.  Also, the direct degradation results showed that the removal of PCP was 2% in MW system without PS after 30 min of MW irradiation. The removal of PCP by MW/PS and MW alone were follow first order rate decay kinetics and the rate constants were 0.093 and 0.00066 min-1, respectively.

A HEALTH SURVEY OF WORKERS IN THE PENTACHLOROPHENOL SECTION OF A CHEMICAL MANUFACTURING PLANT

NARCIS (Netherlands)

CHENG, WN; COENRAADS, PJ; HAO, ZH; LIU, GF

During 1968 to 1985, 109 workers who had been engaged in the production of pentachlorophenol, using non-gamma isomers of hexachloroclohexane (BHC) as the raw material, were surveyed. Endemic chloracne among them had been noted since 1974. The prevalence of chloracne was 73.4% (80/109) in total and

Neutrino factories

International Nuclear Information System (INIS)

Dydak, F.

2002-01-01

The discovery of neutrino oscillations marks a major milestone in the history of neutrino physics, and opens a window to what lies beyond the Standard Model. Many current and forthcoming experiments will answer open questions; however, a major step forward, up to and possibly including CP violation in the neutrino mixing matrix, will be offered by the neutrino beams from a neutrino factory. The neutrino factory is a new concept for producing neutrino beams of unprecedented quality in terms of intensity, flavour composition, and precision of the beam parameters. These beams enable the exploration of otherwise inaccessible domains in neutrino oscillation physics by exploiting baselines of planetary dimensions. Suitable detectors pose formidable challenges but seem within reach with only moderate extrapolations from existing technologies. Although the main physics attraction of the neutrino factory is in the area of neutrino oscillations, an interesting spectrum of further opportunities ranging from high-precision, high-rate neutrino scattering to physics with high-intensity stopped muons comes with it

Planned Positron Factory project

International Nuclear Information System (INIS)

Okada, Sohei

1990-01-01

The Japan Atomic Energy Research Institute, JAERI, has started, drafting a construction plan for the 'Positron Factory', in which intense energy-controllable monoenergetic positron beams are produced from pair-production reactions caused by high-energy electrons from a linac. The JAERI organized a planning committee to provide a basic picture for the Positron Factory. This article presents an overview of the interactions of positrons, intense positron sources and the research program and facilities planned for the project. The interactions of positrons and intense positron sources are discussed focusing on major characteristics of positrons in different energy ranges. The research program for the Positron Factory is then outlined, focusing on advanced positron annihilation techniques, positron spectroscopy (diffraction, scattering, channeling, microscopy), basic positron physics (exotic particle science), and positron beam technology. Discussion is also made of facilities required for the Positron Factory. (N.K.)

Acute toxicity of sodium chloride, pentachlorophenol, Guthion, and hexavalent chromium to fathead minnows (Pimephales promelas) and goldfish (Carassius auratus)

Energy Technology Data Exchange (ETDEWEB)

Adelman, I.R.; Smith, L.L. Jr.; Siesennop, G.D.

1976-02-01

The 96-h LC50's for sodium chloride were 7650 and 7341 mg/liter, for pentachlorophenol 0.21 and 0.22 mg/liter, for Guthion 1.9 and 2.4 mg/liter, and for hexavalent chromium 48 and 120 mg/liter, for fathead minnows (Pimephales promelas) and goldfish (Carassius auratus), respectively. Threshold LC50's were reached in 6 days for sodium chloride (7650 and 7322 mg/liter for fathead minnows and goldfish, respectively), and pentachlorophenol (0.21 and 0.21 mg/liter), but were not attained in 11 days (termination of testing) with Guthion (0.76 and 0.80 mg/liter) and hexavalent chromium (18 and 33 mg/liter). With pentachlorophenol and Guthion goldfish were initially more resistant, but by termination there was no significant difference in LC50's between the two species. With hexavalent chromium the goldfish were more resistant throughout the 11-day test, and with sodium chloride goldfish were initially more resistant but at attainment of a threshold LC50 were less resistant. Use of toxicity curves for assessment of acute mortality permits interpretation not possible in 96-h tests where LC50's are computed at 24-h intervals.

Determination of pentachlorophenol in water and aquifer sediments by high-performance liquid chromatography

Science.gov (United States)

Goerlitz, D.F.

1981-01-01

Methods for the determination of pentachlorophenol (PCP) in water and aquifer sediments are presented. Reverse-phase high-performance liquid chromotography employing ion suppression and gradient elution is used. PCP can be determined directly in water at a lower limit of detection Of 0.2 micrograms per liter. For extracts of sediment, PCP can be determined to a lower limit of 1.0 micrograms per kilogram.

Muon colliders and neutrino factories

Energy Technology Data Exchange (ETDEWEB)

Geer, S.; /Fermilab

2010-09-01

Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate {Omicron}(10{sup 21}) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R&D for Neutrino Factories and Muon Colliders.

Enhanced abiotic and biotic contributions to dechlorination of pentachlorophenol during Fe(III) reduction by an iron-reducing bacterium Clostridium beijerinckii Z

Energy Technology Data Exchange (ETDEWEB)

Xu, Yan [College of Environmental and Natural Resource Sciences, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310058 (China); He, Yan, E-mail: yhe2006@zju.edu.cn [College of Environmental and Natural Resource Sciences, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310058 (China); Feng, Xiaoli [College of Environmental and Natural Resource Sciences, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310058 (China); Liang, Luyi [Experiment Teaching Center for Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058 (China); Xu, Jianming, E-mail: jmxu@zju.edu.cn [College of Environmental and Natural Resource Sciences, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310058 (China); Brookes, Philip C.; Wu, Jianjun [College of Environmental and Natural Resource Sciences, Zhejiang Provincial Key Laboratory of Subtropical Soil and Plant Nutrition, Zhejiang University, Hangzhou 310058 (China)

2014-03-01

A novel Fe(III) reducing bacterium, Clostridium beijerinckii Z, was isolated from glucose amended paddy slurries, and shown to dechlorinate pentachlorophenol (PCP). Fifty percent of added PCP was removed by C. beijerinckii Z alone, which increased to 83% in the presence of both C. beijerinckii Z and ferrihydrite after 11 days of incubation. Without C. beijerinckii Z, the surface-bound Fe(II) also abiotically dechlorinated more than 40% of the added PCP. This indicated that the biotic dechlorination by C. beijerinckii Z is a dominant process causing PCP transformation through anaerobic dechlorination, and that the dechlorination rates can be accelerated by simultaneous reduction of Fe(III). A biochemical electron transfer coupling process between sorbed Fe(II) produced by C. beijerinckii Z and reductive dehalogenation is a possible mechanism. This finding increases our knowledge of the role of Fe(III) reducing genera of Clostridium in dechlorinating halogenated organic pollutants, such as PCP, in anaerobic paddy soils. - Highlights: • A novel Fe(III) reducing bacterium Clostridium beijerinckii Z was isolated and could dechlorinate pentachlorophenol. • Anaerobic transformation of PCP by C. beijerinckii Z could be accelerated by simultaneous reduction of Fe(III). • Biochemical electron transfer coupling between Fe redox cycling and reductive dechlorination was the mechanism involved. • The finding increases our knowledge of Clostridium sp. regarding their multiple functions for dechlorinating pollutants.

Enhanced abiotic and biotic contributions to dechlorination of pentachlorophenol during Fe(III) reduction by an iron-reducing bacterium Clostridium beijerinckii Z

International Nuclear Information System (INIS)

Xu, Yan; He, Yan; Feng, Xiaoli; Liang, Luyi; Xu, Jianming; Brookes, Philip C.; Wu, Jianjun

2014-01-01

A novel Fe(III) reducing bacterium, Clostridium beijerinckii Z, was isolated from glucose amended paddy slurries, and shown to dechlorinate pentachlorophenol (PCP). Fifty percent of added PCP was removed by C. beijerinckii Z alone, which increased to 83% in the presence of both C. beijerinckii Z and ferrihydrite after 11 days of incubation. Without C. beijerinckii Z, the surface-bound Fe(II) also abiotically dechlorinated more than 40% of the added PCP. This indicated that the biotic dechlorination by C. beijerinckii Z is a dominant process causing PCP transformation through anaerobic dechlorination, and that the dechlorination rates can be accelerated by simultaneous reduction of Fe(III). A biochemical electron transfer coupling process between sorbed Fe(II) produced by C. beijerinckii Z and reductive dehalogenation is a possible mechanism. This finding increases our knowledge of the role of Fe(III) reducing genera of Clostridium in dechlorinating halogenated organic pollutants, such as PCP, in anaerobic paddy soils. - Highlights: • A novel Fe(III) reducing bacterium Clostridium beijerinckii Z was isolated and could dechlorinate pentachlorophenol. • Anaerobic transformation of PCP by C. beijerinckii Z could be accelerated by simultaneous reduction of Fe(III). • Biochemical electron transfer coupling between Fe redox cycling and reductive dechlorination was the mechanism involved. • The finding increases our knowledge of Clostridium sp. regarding their multiple functions for dechlorinating pollutants

Fish as major carbonate mud producers and missing components of the tropical carbonate factory

Science.gov (United States)

Perry, Chris T.; Salter, Michael A.; Harborne, Alastair R.; Crowley, Stephen F.; Jelks, Howard L.; Wilson, Rod W.

2011-01-01

Carbonate mud is a major constituent of recent marine carbonate sediments and of ancient limestones, which contain unique records of changes in ocean chemistry and climate shifts in the geological past. However, the origin of carbonate mud is controversial and often problematic to resolve. Here we show that tropical marine fish produce and excrete various forms of precipitated (nonskeletal) calcium carbonate from their guts ("low" and "high" Mg-calcite and aragonite), but that very fine-grained (mostly 4 mole % MgCO3) are their dominant excretory product. Crystallites from fish are morphologically diverse and species-specific, but all are unique relative to previously known biogenic and abiotic sources of carbonate within open marine systems. Using site specific fish biomass and carbonate excretion rate data we estimate that fish produce ~6.1 x 106 kg CaCO3/year across the Bahamian archipelago, all as mud-grade (the marine carbonate factories function both today and in the past.

Colorful Microbial Cell Factories

DEFF Research Database (Denmark)

Petersen, Pia Damm

Yeast cell factories are powerful tools used for the production of high-value natural compounds otherwise not easily available. Many bioactive and industrially important plant secondary metabolites can be produced in yeast by engineering their biosynthetic pathways into yeast cells, as these both...... anthocyanins. Yeast cell factories present a platform to circumvent the problem of low yields of interesting molecular structures in plant tissues, as hand-picking of desired enzyme activities allows for specific biosynthesis of the precise pigment of interest, as well as choosing more stable structures...... for heterologous biosynthesis is possible. In cell factories, great improvements in yields can be achieved through molecular engineering of flux from endogenous yeast precursors, e.g. by elimination of by-product formation, and by genetic optimization of pathway components, such as fine-tuning of expression levels...

Hydroxyl-radical induced dechlorination of pentachlorophenol in water

International Nuclear Information System (INIS)

He Yongke; Wu Jilan; Fang Xingwang; Sonntag, C. von

1998-01-01

The hydroxyl-radical induced dechlorination of pentachlorophenol (PCP) in water has been investigated pulse radiolytically. Hydroxyl radicals react with PCP by both electron transfer and addition. The former process results in pentachlorophenoxyl radicals (PCP-O), the latter process followed by rapid HCl elimination gives birth to deprotonated hydroxytetrachlorophenoxyl radicals ( - O-TCP-O). These phenoxyl radicals exhibit maximum absorption around 452 nm, which hinders the proper estimation of the ratio of the two processes. However, these two processes cause different changes in conductivity. In basic solution, the electron transfer causes a conductivity increase due to the formation of OH - whereas an addition followed by HCl elimination results in a conductivity decrease. The concurrence of these two processes reduces the relative variation in conductivity, from which about 53% electron transfer is deduced

INFLUENCE OF SOLVENT AND SORBENT CHARACTERISTICS ON DISTRIBUTION OF PENTACHLOROPHENOL IN OCTANOL-WATER AND SOIL-WATER SYSTEMS

Science.gov (United States)

Sorbent and solvent characteristics influencing sorption of pentachlorophenol (PCP) were investigated. Analysis of aqueous sorption data for several sorbents over a broad pH range suggested hydrophobic sorption of neutral PCP predominates at pH 7. At pH > 7, sorption of the penta...

Neutrino Factory: status and prospects

International Nuclear Information System (INIS)

Long, K.

2011-01-01

The properties of the neutrino provide a unique window on physics beyond that described by the Standard Model. The study of sub-leading effects in neutrino oscillations has begun with the race to measure θ 13 consensus is emerging within the international community that a novel neutrino source is required to allow sensitive searches for leptonic CP violation to be carried out and the neutrino mass-hierarchy to be determined. The Neutrino Factory, in which intense neutrino beams are produced from the decay of muons, has been shown to out-perform the other proposed facilities. The physics case for the Neutrino Factory will be reviewed and the baseline design of the facility being developed by the International Design Study for the Neutrino Factory (the IDS-NF) collaboration will be described.

Steps towards the Neutrino Factory

International Nuclear Information System (INIS)

Long, K.

2012-01-01

The properties of the neutrino provide a unique window on physics beyond that described by the Standard Model. The study of sub-leading effects in neutrino oscillations has begun with the race to measure θ 13 . A consensus is emerging within the international community that a novel neutrino source is required to allow sensitive searches for leptonic CP violation to be carried out and the neutrino mass-hierarchy to be determined. The Neutrino Factory, in which intense neutrino beams are produced from the decay of muons, has been shown to out-perform the other proposed facilities. The physics case for the Neutrino Factory will be reviewed and the baseline design of the facility being developed by the International Design Study for the Neutrino Factory (the IDS-NF) collaboration will be described.

Assessment of the environmental effects associated with wooden bridges preserved with creosote, pentachlorophenol, or chromated copper arsenate

Science.gov (United States)

Kenneth M. Brooks

Timber bridges provide an economical alternative to concrete and steel structures, particularly in rural areas with light to moderate vehicle traffic. Wooden components of these bridges are treated with chromated copper arsenate type C (CCA), pentachlorophenol, or creosote to prolong the life of the structure from a few years to many decades. This results in reduced...

Plant uptake of pentachlorophenol from sludge-amended soils

International Nuclear Information System (INIS)

Bellin, C.A.; O'Connor, G.A.

1990-01-01

A greenhouse study was conducted to determine the effects of sludge on plant uptake of 14 C-pentachlorophenol (PCP). Plants included tall fescue (Festuca arundinacea Schreb.), lettuce (Latuca sativa L.), carrot (Daucus carota L.), and chile pepper (Capsicum annum L.). Minimal intact PCP was detected in the fescue and lettuce by gas chromatography/mass spectrometry (GC/MS) analysis. No intact PCP was detected in the carrot tissue extracts. Chile pepper was not analyzed for intact PCP because methylene chloride extracts contained minimal 14 C. The GC/MS analysis of soil extracts at harvest suggests a half-life of PCP of about 10 d independent of sludge rate or PCP loading rate. Rapid degradation of PCP in the soil apparently limited PCP availability to the plant. Bioconcentration factors (dry plant wt./initial soil PCP concentration) based on intact PCP were < 0.01 for all crops, suggesting little PCP uptake. Thus, food-chain crop PCP uptake in these alkaline soils should not limit land application of sludge

Catalytic ozonation of pentachlorophenol in aqueous solutions using granular activated carbon

Science.gov (United States)

Asgari, Ghorban; Samiee, Fateme; Ahmadian, Mohammad; Poormohammadi, Ali; solimanzadeh, Bahman

2017-03-01

The efficiency of granular activated carbon (GAC) was investigated in this study as a catalyst for the elimination of pentachlorophenol (PCP) from contaminated streams in a laboratory-scale semi-batch reactor. The influence of important parameters including solution pH (2-10), radical scavenger (tert-butanol, 0.04 mol/L), catalyst dosage (0.416-8.33 g/L), initial PCP concentration (100-1000 mg/L) and ozone flow rate (2.3-12 mg/min) was examined on the efficiency of the catalytic ozonation process (COP) in degradation and mineralization of PCP in aqueous solution. The experimental results showed that catalytic ozonation with GAC was most effective at pH of 8 with ozone flow rate of 12 mg/min and a GAC dosage of 2 g. Compared to the sole ozonation process (SOP), the removal levels of PCP and COP were, 98, and 79 %, respectively. The degradation rate of kinetics was also investigated. The results showed that using a GAC catalyst in the ozonation of PCP produced an 8.33-fold increase in rate kinetic compared to the SOP under optimum conditions. Tert-butanol alcohol (TBA) was used as a radical scavenger. The results demonstrated that COP was affected less by TBA than by SOP. These findings suggested that GAC acts as a suitable catalyst in COP to remove refractory pollutants from aqueous solution.

Virtual Learning Factory on VR-Supported Factory Planning

OpenAIRE

Weidig , Christian; Menck , Nicole; Winkes , Pascal ,; Aurich , Jan ,

2014-01-01

Part 13: Virtual Reality and Simulation; International audience; Learning Factories are becoming popular as tangible measures to teach engineering methods while making use of them in an industrial-like environment. Their core component is usually a factory demonstrator, users are physically working with. For factory planning such approaches can hardly be adapted, due to long lasting realization phases.To overcome this obstacle a virtual learning factory has been developed whose core component...

Enhanced selection of micro-aerobic pentachlorophenol degrading granular sludge

Energy Technology Data Exchange (ETDEWEB)

Lv, Yuancai, E-mail: donkey1204@hotmail.com [State Key Laboratory of Pulp and Paper Engineering, College of Light Industry and Food Science, South China University of Technology, Guangzhou 510640 (China); Chen, Yuancai, E-mail: chenyc@scut.edu.cn [State Key Laboratory of Pulp and Paper Engineering, College of Light Industry and Food Science, South China University of Technology, Guangzhou 510640 (China); Ministry of Education Key Laboratory of Pollution Control and Ecological Remediation for Industrial Agglomeration Area, College of Environment and Energy, South China University of Technology, Guangzhou 510006 (China); Song, Wenzhe, E-mail: songwenzhe007@126.com [Ministry of Education Key Laboratory of Pollution Control and Ecological Remediation for Industrial Agglomeration Area, College of Environment and Energy, South China University of Technology, Guangzhou 510006 (China); Hu, Yongyou, E-mail: ppyyhu@scut.edu.cn [State Key Laboratory of Pulp and Paper Engineering, College of Light Industry and Food Science, South China University of Technology, Guangzhou 510640 (China); Ministry of Education Key Laboratory of Pollution Control and Ecological Remediation for Industrial Agglomeration Area, College of Environment and Energy, South China University of Technology, Guangzhou 510006 (China)

2014-09-15

Graphical abstract: In this work, an aerobic column reactor was placed before the USB to maintain micro-oxygen condition in the reactor and the micro-aerobic pentachlorophenol (PCP) degrading granular sludge under oxygen-limited conditions (0.1–0.2 mg L{sup −1}) was successfully obtained. PCP degradation by the micro-aerobic system was studied and the variance of microbial community was also discussed by using PCR-DGGE analysis. - Highlights: • Micro-aerobic granular sludge was cultivated in column-type combined reactors. • PCP biodegradation, VFA accumulation and biogas production were studied. • The function of Methanogenic archaeon in the system was investigated. • Fluctuation and diversity of microbial community were discussed by DGGE analysis. • The dominated microorganisms were identified by 16S rDNA sequences. - Abstract: Column-type combined reactors were designed to cultivate micro-aerobic pentachlorophenol (PCP) degrading granular sludge under oxygen-limited conditions (0.1–0.2 mg L{sup −1}) over 39-day experimental period. Micro-aerobic granular had both anaerobic activity (SMA: 2.34 mMCH{sub 4}/h g VSS) and aerobic activity (SOUR: 2.21 mMO{sub 2}/h g VSS). Metabolite analysis results revealed that PCP was sequentially dechlorinated to TCP, DCP, and eventually to MCP. Methanogens were not directly involved in the dechlorination of PCP, but might played a vital role in stabilizing the overall structure of the granule sludge. For Eubacteria, the Shannon Index (2.09 in inoculated granular sludge) increased both in micro-aerobic granular sludge (2.61) and PCP-degradation granular sludge (2.55). However, for Archaea, it decreased from 2.53 to 1.85 and 1.84, respectively. Although the Shannon Index demonstrated slight difference between micro-aerobic granular sludge and PCP-degradation granular sludge, the Principal Component Analysis (PCA) indicated obvious variance of the microbial composition, revealing significant effect of micro

Enhanced selection of micro-aerobic pentachlorophenol degrading granular sludge

International Nuclear Information System (INIS)

Lv, Yuancai; Chen, Yuancai; Song, Wenzhe; Hu, Yongyou

2014-01-01

Graphical abstract: In this work, an aerobic column reactor was placed before the USB to maintain micro-oxygen condition in the reactor and the micro-aerobic pentachlorophenol (PCP) degrading granular sludge under oxygen-limited conditions (0.1–0.2 mg L −1 ) was successfully obtained. PCP degradation by the micro-aerobic system was studied and the variance of microbial community was also discussed by using PCR-DGGE analysis. - Highlights: • Micro-aerobic granular sludge was cultivated in column-type combined reactors. • PCP biodegradation, VFA accumulation and biogas production were studied. • The function of Methanogenic archaeon in the system was investigated. • Fluctuation and diversity of microbial community were discussed by DGGE analysis. • The dominated microorganisms were identified by 16S rDNA sequences. - Abstract: Column-type combined reactors were designed to cultivate micro-aerobic pentachlorophenol (PCP) degrading granular sludge under oxygen-limited conditions (0.1–0.2 mg L −1 ) over 39-day experimental period. Micro-aerobic granular had both anaerobic activity (SMA: 2.34 mMCH 4 /h g VSS) and aerobic activity (SOUR: 2.21 mMO 2 /h g VSS). Metabolite analysis results revealed that PCP was sequentially dechlorinated to TCP, DCP, and eventually to MCP. Methanogens were not directly involved in the dechlorination of PCP, but might played a vital role in stabilizing the overall structure of the granule sludge. For Eubacteria, the Shannon Index (2.09 in inoculated granular sludge) increased both in micro-aerobic granular sludge (2.61) and PCP-degradation granular sludge (2.55). However, for Archaea, it decreased from 2.53 to 1.85 and 1.84, respectively. Although the Shannon Index demonstrated slight difference between micro-aerobic granular sludge and PCP-degradation granular sludge, the Principal Component Analysis (PCA) indicated obvious variance of the microbial composition, revealing significant effect of micro-aerobic condition and

Catalytic photooxidation of pentachlorophenol using semiconductor nanoclusters

Energy Technology Data Exchange (ETDEWEB)

WILCOXON,JESS P.

2000-04-17

Pentachlorophenol (PCP) is a toxic chlorinated aromatic molecule widely used as fungicide, a bactericide and a wood preservation, and thus ubiquitous in the environment. The authors report photo-oxidation of PCP using a variety of nanosize semiconductor metal oxides and sulfides in both aqueous and polar organic solvents and compare the photo-oxidation kinetics of these nanoclusters to widely studied bulk powders like Degussa P-25 TiO{sub 2} and CdS. They study both the light intensity dependence of PCP photooxidation for nanosize SnO{sub 2} and the size dependence of PCP photooxidation for both nanosize SnO{sub 2} and MoS{sub 2}. They find an extremely strong size dependence for the latter which they attribute to its size-dependent band gap and the associated change in redox potentials due to quantum confinement of the hole-electron pair. The authors show that nanosize MoS{sub 2} with a diameter of d=3.0 nm and an absorbance edge of {approximately}450 nm is a very effective photooxidation catalyst for complete PCP mineralization, even when using only visible light irradiation.

Meson factories

International Nuclear Information System (INIS)

Dicello, J.F.; Zaider, M.; Bradbury, J.N.

1979-01-01

Technological improvements in accelerator design in the 1960's resulted in the capability to develop medium-energy proton accelerators with beam intensities of almost 1 mA. These beams are able to produce fluxes of secondary particles, including pions, muons, neutrinos, and neutrons, which are as much as 10,000 times as intense as those previously available. Those machines built for optimum meson production are commonly called meson factories. The characteristics of these facilities are reviewed, and the present programs in applied research, and some potential areas of future work are discussed

Pentachlorophenol radical cations generated on Fe(III)-montmorillonite initiate octachlorodibenzo-p-dioxin formation in clays: DFT and FTIR studies

Science.gov (United States)

Gu, Cheng; Liu, Cun; Johnston, Cliff T.; Teppen, Brian J.; Li, Hui; Boyd, Stephen A.

2011-01-01

Octachlorodibenzodioxin (OCDD) forms spontaneously from pentachlorophenol (PCP) on the surfaces of Fe(III)-saturated smectite clay (1). Here, we used in situ FTIR methods and quantum mechanical calculations to determine the mechanism by which this reaction is initiated. As the clay was dehydrated, vibrational spectra showed new peaks that grew and then reversibly disappeared as the clay rehydrated. First principle DFT calculations of hydrated Fe-PCP clusters reproduced these transient FTIR peaks when inner-sphere complexation and concomitant electron transfer produced Fe(II) and PCP radical cations. Thus, our experimental (FTIR) and theoretical (quantum mechanical) results mutually support the hypothesis that OCDD formation on Fe-smectite surfaces is initiated by the reversible formation of metastable PCP radical cations via single electron transfer from PCP to Fe(III). The negatively charged clay surface apparently selects for this reaction mechanism by stabilizing PCP radical cations. PMID:21254769

The durability of fired brick incorporating textile factory waste ash and basaltic pumice

Energy Technology Data Exchange (ETDEWEB)

Binici, Hanifi [Kahramanmaras Sutcu Imam Univ., Kahramanmaras (Turkey). Dept. of Civil Engineering; Yardim, Yavuz [Epoka Univ., Tirana (Albania). Dept. of Civil Engineering

2012-07-15

This study investigates the durability of fired brick produced with additives of textile factories' waste ash and basaltic pumice. The effects of incorporating waste ash and basaltic pumice on durability and mechanical properties of the clay bricks were studied. Samples were produced with different ratios of the textile factories' waste ash and basaltic pumice added and at different fire temperatures of 700, 900, and 1 050 C for 8 h. The bricks with additives were produced by adding equal amounts of textile factories' waste ash and basaltic pumice, separately and together, with rates of 5, 10 and 20 wt.%. The produced samples were kept one year in sodium sulphate and sodium nitrate and tested under freezing - unfreezing and drying - wetting conditions. Then compression strength and mass loss of the samples with and without additives were investigated. The test results were compared with standards and results obtained from control specimens. The results showed that incorporations up to 10 wt.% of textile factories' waste ash and basaltic pumice is beneficial to the fired brick. Both textile factories' waste ash and basaltic pumice were suitable additives and could be used for more durable clay brick production at 900 C fire temperature. (orig.)

Physics at e+e- factories

International Nuclear Information System (INIS)

Lueth, V.; MacFarlane, D.B.

1991-02-01

Feasible designs are well advanced for high-luminosity e + e - storage rings which produce B 0 bar B 0 pairs either at rest or, in what appears to be a more promising option, boosted in the detector frame. Facilities which could provide samples of 30--100 fb -1 per year on the Υ(4S) will be proposed in early 1991. Here we examine the principal physics goal of such B Factories, namely CP violation in the b system. Methods in a variety of channels, estimated event samples, and detector requirements are all considered. We conclude that the physics argument for an e + e - B Factory is well documented, and compelling. 50 refs., 22 figs., 10 tabs

Particle factories

International Nuclear Information System (INIS)

Schindler, Rafe

1989-01-01

Physicists' attention is increasingly turning to the high luminosity frontier - providing enough collisions to amass sizable numbers of rare events - to complement the traditional quest for higher energies. This month we cover three areas where projects are now being considered: Phi-factory workshop, PSI Planning for B meson factory, Tau-charm factory

Particle factories

Energy Technology Data Exchange (ETDEWEB)

Schindler, Rafe

1989-07-15

Physicists' attention is increasingly turning to the high luminosity frontier - providing enough collisions to amass sizable numbers of rare events - to complement the traditional quest for higher energies. This month we cover three areas where projects are now being considered: Phi-factory workshop, PSI Planning for B meson factory, Tau-charm factory.

Technology and Participation in Japanese Factories: The Consequences for Morale and Productivity.

Science.gov (United States)

Hull, Frank; Azumi, Koya

1988-01-01

By fully using their human resources, Japanese factories mass produce goods of low cost and high quality. Participation in Japanese factories occurs in a more hierarchical framework than advocated in the Western model of worker democracy. (JOW)

Fractional factorial plans

CERN Document Server

Dey, Aloke

2009-01-01

A one-stop reference to fractional factorials and related orthogonal arrays.Presenting one of the most dynamic areas of statistical research, this book offers a systematic, rigorous, and up-to-date treatment of fractional factorial designs and related combinatorial mathematics. Leading statisticians Aloke Dey and Rahul Mukerjee consolidate vast amounts of material from the professional literature--expertly weaving fractional replication, orthogonal arrays, and optimality aspects. They develop the basic theory of fractional factorials using the calculus of factorial arrangements, thereby providing a unified approach to the study of fractional factorial plans. An indispensable guide for statisticians in research and industry as well as for graduate students, Fractional Factorial Plans features: * Construction procedures of symmetric and asymmetric orthogonal arrays. * Many up-to-date research results on nonexistence. * A chapter on optimal fractional factorials not based on orthogonal arrays. * Trend-free plans...

Particle physics prospects for the KAON factory

International Nuclear Information System (INIS)

Bryman, D.

1989-05-01

The Kaon Factory at TRIUMF will produce beams of kaons, antiprotons, neutrinos and other particles with a hundred-fold increase in intensity over existing machines in the 30 GeV region. This will make possible new high precision experiments designed to test current ideas as well as high sensitivity measurements which could potentially reveal new effects. A sample of particle physics experiments involving rare kaon decays, CP and T violation studies, neutrino properties and reactions and light quark spectroscopy which might take advantage of the new opportunities presented by the Kaon Factory is discussed

Food-Energy Interactive Tradeoff Analysis of Sustainable Urban Plant Factory Production Systems

OpenAIRE

Li-Chun Huang; Yu-Hui Chen; Ya-Hui Chen; Chi-Fang Wang; Ming-Che Hu

2018-01-01

This research aims to analyze the food–energy interactive nexus of sustainable urban plant factory systems. Plant factory systems grow agricultural products within artificially controlled growing environment and multi-layer vertical growing systems. The system controls the supply of light, temperature, humidity, nutrition, water, and carbon dioxide for growing plants. Plant factories are able to produce consistent and high-quality agricultural products within less production space for urban a...

Pseudomonas putida as a microbial cell factory

DEFF Research Database (Denmark)

Wigneswaran, Vinoth

for sustainable production of chemicals, which can be achieved by microbial cell factories. The work presented in this PhD thesis elucidates the application of Pseudomonas putida as a microbial cell factory for production of the biosurfactant rhamnolipid. The rhamnolipid production was achieved by heterologous...... phase. The genomic alterations were identified by genome sequencing and revealed parallel evolution. Glycerol was also shown to be able to support biofilm growth and as a result of this it can be used as an alternative substrate for producing biochemicals in conventional and biofilm reactors. The use...... of biofilm as a production platform and the usage of glycerol as a feedstock show the potential of using microbial cell factories in the transition toward sustainable production of chemicals. Particularly, the applicability of biofilm as a production platform can emerge as a promising alternative...

AutoPyFactory: A Scalable Flexible Pilot Factory Implementation

International Nuclear Information System (INIS)

Caballero, J; Hover, J; Love, P; Stewart, G A

2012-01-01

The ATLAS experiment at the CERN LHC is one of the largest users of grid computing infrastructure, which is a central part of the experiment's computing operations. Considerable efforts have been made to use grid technology in the most efficient and effective way, including the use of a pilot job based workload management framework. In this model the experiment submits ‘pilot’ jobs to sites without payload. When these jobs begin to run they contact a central service to pick-up a real payload to execute. The first generation of pilot factories were usually specific to a single Virtual Organization (VO), and were bound to the particular architecture of that VO's distributed processing. A second generation provides factories which are more flexible, not tied to any particular VO, and provide new and improved features such as monitoring, logging, profiling, etc. In this paper we describe this key part of the ATLAS pilot architecture, a second generation pilot factory, AutoPyFactory. AutoPyFactory has a modular design and is highly configurable. It is able to send different types of pilots to sites and exploit different submission mechanisms and queue characteristics. It is tightly integrated with the PanDA job submission framework, coupling pilot flow to the amount of work the site has to run. It gathers information from many sources in order to correctly configure itself for a site and its decision logic can easily be updated. Integrated into AutoPyFactory is a flexible system for delivering both generic and specific job wrappers which can perform many useful actions before starting to run end-user scientific applications, e.g., validation of the middleware, node profiling and diagnostics, and monitoring. AutoPyFactory also has a robust monitoring system that has been invaluable in establishing a reliable pilot factory service for ATLAS.

Haiti. Educating factory workers.

Science.gov (United States)

Hughes, H

1990-04-01

There are approximately 50,000 workers employed in the light assembly industry in Haiti. About 70% are women, the majority of whom are aged between 25 and 34 years, and are either single or in a nonpermanent relationship with the father of their children. Many live and work in appalling conditions, surviving on very low wages to support several children and an extended family. The acquired immunodeficiency syndrome (AIDS) is now a visible problem in many factories. In October 1988, the Center for the Promotion of Women Workers (Centre de Promotion des Femmes Ouvriers/CPFO) launched a pilot AIDS education program for factory women. The Center, based in a large industrial zone near the airport, runs a health clinic and courses in literacy, communications skills, health promotion and family planning. The new AIDS program allowed CPFO staff to gain entry into factories for the 1st time. Other courses were held outside working hours and outside factory premises. Staff contacted manages by telephone to arrange a meeting to discuss AIDS and to ask permission to hold educational "round tables" with workers. Of 18 managers in the factories approached over a 12-month period, only 2 refused entry to CPFO staff. Almost all managers reported they had registered between 2 and 5 deaths from AIDS among their employees over the past couple of years. A total of 85 educational sessions, each lasting about 2 hours, were held within 28 different factories, community or labor organizations reaching 3063 workers (male and female). In each session, the presentation was carried out by 2 CPFO trained monitors and included a slide show, flip charts, and the video "Met ko," originally produced for Haitian immigrants in New York. The most important aspect of the program was the training of 38 volunteer factory-based health promoters. These promoters attended the round table sessions, where they facilitated discussion and distributed condoms and were subsequently available for counseling co

Studies on the physiology of microbial degradation of pentachlorophenol

Energy Technology Data Exchange (ETDEWEB)

Valo, R.; Apajalahti, J.; Salkinoja-Salonen, M.

1985-03-01

The requirements and conditions for pentachlorophenol (PCP) biodegradation by a mixed bacterial culture was studied. The effects of oxygen, nutrients, additional carbon sources, pH and temperature are described. Up to 90% of PCP was degraded into CO/sub 2/ and inorganic chloride in 1 week at an input concentration of <600 ..mu..M. Degradation continued when pO/sub 2/ was lowered to 0.0002 atm but ceased when pO/sub 2/ was further decreased to 0.00002 atm. Supplementary carbon sources, such as phenol, hydroxybenzoic acids or complex nutrients did not affect the biodegradation, but the presence of ammonium salts enhanced the rate of PCP degradation without affecting the yield of CO/sub 2/. The degrading organisms were shown to be procaryotic mesophiles; no degradation was shown at temperatures below +8/sup 0/ and above +50/sup 0/C. The optimum pH for degradation was from 6.4 to 7.2 and at higher pH value (8.4) degradation was inhibited more than at lower pH (5.6).

Food-Energy Interactive Tradeoff Analysis of Sustainable Urban Plant Factory Production Systems

Directory of Open Access Journals (Sweden)

Li-Chun Huang

2018-02-01

Full Text Available This research aims to analyze the food–energy interactive nexus of sustainable urban plant factory systems. Plant factory systems grow agricultural products within artificially controlled growing environment and multi-layer vertical growing systems. The system controls the supply of light, temperature, humidity, nutrition, water, and carbon dioxide for growing plants. Plant factories are able to produce consistent and high-quality agricultural products within less production space for urban areas. The production systems use less labor, pesticide, water, and nutrition. However, food production of plant factories has many challenges including higher energy demand, energy costs, and installation costs of artificially controlled technologies. In the research, stochastic optimization model and linear complementarity models are formulated to conduct optimal and equilibrium food–energy analysis of plant factory production. A case study of plant factories in the Taiwanese market is presented.

Express Detection of Pentachlorophenol as Dioxins Precursor in Natural Water

Directory of Open Access Journals (Sweden)

Vitalia S. Krikounova

2002-01-01

Full Text Available A rapid detection method for the pesticide pentachlorophenol (PCP — polarization fluoroimmunoassay (PFIA — in the dynamic range of 10–9,000 ppb was developed. PCP may form polychlorinated dibenzo-p-dioxins, making environmental monitoring of this compound an issue of great importance. In order to optimize the PFIA procedure, a number of fluorescein-labeled PCP derivatives and similar compounds (tracers were synthesized, and the influence of their structure on PFIA characteristics was studied. Also, two antisera were tested in developing PFIA for PCP. The developed method is highly specific for PCP and can be used for its determination in water samples at a level down to 10 ppb. Total time of the assay for 10 samples is about 7 min. The assay provides a useful and a highly practical screening tool for the processing of large numbers of samples and for the preliminary estimation of potential dioxins contamination in water resources.

AutoPyFactory: A Scalable Flexible Pilot Factory Implementation

CERN Document Server

Caballero, J; The ATLAS collaboration; Love, P; Stewart, G

2012-01-01

The ATLAS experiment at the CERN LHC is one of the largest users of grid computing infrastructure, which is a central part of the experiment’s computing operations. Considerable efforts have been made to use grid technology in the most efficient and effective way, including the use of a pilot job based workload management framework. In this model the experiment submits ’pilot’ jobs to sites without payload. When these jobs begin to run they contact a central service to retrieve a real payload to execute. The first generation of pilot factories were usually specific to a single VO, and were bound to the particular architecture of that VO’s distributed processing. A second generation provides factories which are more flexible, not tied to any particular VO, and provide new or improved features such as monitoring, logging, profiling, etc. In this paper we describe this key part of the ATLAS pilot architecture, a second generation pilot factory, AutoPyFactory. AutoPyFactory has a modular design and is hig...

A tau-charm-factory at Argonne

International Nuclear Information System (INIS)

Norem, J.; Repond, J.

1994-01-01

In this paper we explore the possibility of building a tau-charm-factory at the Argonne National Laboratory. A tau-charm-factory is an e + e - collider with a center-of-mass energy between 3.0 GeV and 5.0 GeV and a luminosity of at least 1 x 10 33 cm -2 s -1 . Once operational, the facility will produce large samples of τ pairs, charm mesons, and charmonium with either negligible or well understood backgrounds. This will lead to high precision measurements in the second generation quark and the third generation lepton sectors that cannot be done at other facilities. Basic physical properties and processes, such as the tau neutrino mass, rare tau decays, charm decay constants, rare charm meson decays, neutral D 0 -- meson mixing, and many more will be studied with unique precision. An initial design of the collider including the injector system is described. The design shows that a luminosity of at least 1 x 10 33 cm -2 s -1 can be achieved over the entire center-of-mass energy range of the factory

Prevalence of Salmonella spp. and Listeria monocytogenes at small-scale spanish factories producing traditional fermented sausages.

Science.gov (United States)

Martin, Belen; Garriga, Margarita; Aymerich, Teresa

2011-05-01

The manufacturing of fermented sausages is subject to natural contamination processes that can potentially carry foodborne pathogens along the process chain and result in contamination of the final product. The aim of this study was to evaluate the occurrence of Salmonella spp. and Listeria monocytogenes at different sampling points during the manufacturing process of fuet, a type of traditional fermented sausage, at 10 small-scale Spanish factories. The presence of both pathogens was studied in the raw materials (19 casings and 19 meat batters), the final products (19 fermented sausages), and the factory equipment (12 mincing, 12 mixing, and 19 stuffing machines, 19 cutting tables, 11 knives, and 12 cold rooms) by using classical microbiological techniques and real-time PCR. Salmonella was not detected in the equipment analyzed or in the final products, but it was detected in the raw materials (23.7% of samples). L. monocytogenes showed higher incidence than Salmonella and was detected in the equipment (11.8% of samples), the raw materials (28.9%), and the final products (15.8%), confirming its ubiquity throughout the manufacturing process of fermented sausages. Five factories were further investigated to study the changes in the distribution of pathogens in the fuet production process over a period of either 2 or 3 years. There was considerable variation in the incidence of both pathogens at different sampling periods, and there was no relation between seasonal variations or geographic location of the factories.

R and D Toward a Neutrino Factory and Muon Collider

International Nuclear Information System (INIS)

Zisman, Michael S.

2009-01-01

There is considerable interest in the use of muon beams to create either an intense source of decay neutrinos aimed at a detector located 3000-7500 km away (a Neutrino Factory), or a Muon Collider that produces high-luminosity collisions at the energy frontier. R and D aimed at producing these facilities has been under way for more than 10 years. This paper will review experimental results from MuCool, MERIT, and MICE and indicate the extent to which they will provide proof-of-principle demonstrations of the key technologies required for a Neutrino Factory or Muon Collider. Progress in constructing components for the MICE experiment will also be described.

Effects of pentachlorophenol on survival of earthworms (Lumbricus terrestris) and phagocytosis by their immunoactive coelomocytes

Energy Technology Data Exchange (ETDEWEB)

Giggleman, M.A.; Fitzpatrick, L.C.; Goven, A.J. [Univ. of North Texas, Denton, TX (United States); Venables, B.J. [TRAC Labs., Denton, TX (United States)

1998-12-01

Earthworms, Lumbricus terrestris, exposed for 96 h to filter paper saturated with five nominal concentrations of pentachlorophenol, exhibited a 50% lethal concentration (LC50) of 25.0 {micro}g PCP/cm{sup 2} and corresponding whole worm body burden-based 50% lethal dose (LD50) of 877.7 {micro}g PCP/g dry mass. Linear regression modeling showed that worms increased body concentrations (BC = {micro}g PCP/g dry tissue mass) with increasing exposure concentrations (EC) according to BC = 113.5 + 29.5EC. Phagocytosis of yeast cells by immunoactive coelomocytes was suppressed only at body concentrations (863.3 {micro}g PCP/g dry mass) that approximated the calculated LD50 and overlapped those demonstrating lethality, indicating a sharp transition between sublethal and lethal toxicity. An exposure concentration of 15 {micro}g PCP/cm{sup 2} produced significant suppression of phagocytosis of yeast cells by immunoactive coelomocytes. However, the average measured body burden from this group approximated the estimated LD50, indicating a sharp toxic response slope. Exposure to 10 {micro}g PCP/cm{sup 2} with a corresponding body concentration of 501.3 {micro}g PCP/g dry mass did not affect phagocytosis. The importance of body burden data is emphasized.

Factory physics

CERN Document Server

Hopp, Wallace J.

2011-01-01

After a brief introductory chapter, "Factory Physics 3/e" is divided into three parts: I - The Lessons of History; II - Factory Physics; and III - Principles in Practice. The scientific approach to manufacturing and supply chain management, developed in Part II, is unique to this text. No other text or professional book provides a rigorous, principles-based foundation for manufacturing management. The Third Edition offers tighter connections between Lean Manufacturing, MRP/ERP, Six Sigma, Supply Chain Management, and Factory Physics. In addition to enhancing the historical overview of how these systems evolved, the authors show explicitly how users can achieve Lean Manufacturing objectives (faster response, less inventory) using the integration aspects of MRP/ERP/SCM systems along with the variance analysis methods of Six Sigma. Factory Physics provides the overarching framework that coordinates all of these initiatives into a single-focused strategy.

Feasibility of biodegradation of pentachlorophenol in scrap wood

International Nuclear Information System (INIS)

Beaulieu, G.; Besner, A.; Gilbert, R.; Tetreault, P.; Beaudet, R.; Bisaillon, J. G.; Lepine, F.; Ottou, J. M.; Sansregret, J. L.; Lei, J.

1998-04-01

The feasibility of biological treatment of scrap wood impregnated in pentachlorophenol (PCP) was investigated using wood samples impregnated with PCP for biodegradation experiments by the Hydro-Quebec Research Institute (IREQ). IREQ identified the necessity of pre-treating the wood, first by shredding wood poles into wood shavings, followed by mechanical milling of the shavings to obtain wood dust. Biodegradation experiments under anaerobic conditions were performed by the Armand-Frappier Institute by isolating a consortium of bacteria from a mixture of PCP-contaminated soils and a municipal anaerobic sludge that was able to degrade PCP under anaerobic methanogenic conditions at 29 degrees C. A complementary source of carbon was found to be necessary for the bacterial consortium to degrade the PCP. The best PCP degradation results were obtained with an aerobic fixed-film reactor. Aerobic biodegradation tests were performed on liquor extracted from wood dust contaminated with PCP. The anaerobic fixed field reactor was able to completely degrade the PCP extracted from wood dust in less than one day. Aerobic biodegradation was also investigated using microorganisms and fungi. Over a four month experimental period only low concentrations of PCP were found in effluents treated with the aerobic cultures. 117 refs., 38 tabs., 31 figs

Muon front end for the neutrino factory

CERN Document Server

Rogers, C T; Prior, G; Gilardoni, S; Neuffer, D; Snopok, P; Alekou, A; Pasternak, J

2013-01-01

In the neutrino factory, muons are produced by firing high-energy protons onto a target to produce pions. The pions decay to muons and pass through a capture channel known as the muon front end, before acceleration to 12.6 GeV. The muon front end comprises a variable frequency rf system for longitudinal capture and an ionization cooling channel. In this paper we detail recent improvements in the design of the muon front end.

Incense and Joss Stick Making in Small Household Factories, Thailand

Directory of Open Access Journals (Sweden)

S Siripanich

2014-07-01

Full Text Available Background: Incense and joss stick are generally used in the world. Most products were made in small household factories. There are many environmental and occupational hazards in these factories. Objective: To evaluate the workplace environmental and occupational hazards in small household incense and joss stick factories in Roi-Et, Thailand. Methods: Nine small household factories in rural areas of Roi-Et, Thailand, were studied. Dust concentration and small aerosol particles were counted through real time exposure monitoring. The inductively coupled plasma optical emission spectrometry (ICP-OES was used for quantitative measurement of heavy metal residue in incense products. Results: Several heavy metals were found in dissolved dye and joss sticks. Those included barium, manganese, and lead. Rolling and shaking processes produced the highest concentration of dust and aerosols. Only 3.9 % of female workers used personal protection equipment. Conclusion: Dust and chemicals were major threats in small household incense and joss stick factories in Thailand. Increasing awareness towards using personal protection equipment and emphasis on elimination of environmental workplace hazards should be considered to help the workers of this industry.

Cell Factory Engineering

DEFF Research Database (Denmark)

Davy, Anne Mathilde; Kildegaard, Helene Faustrup; Andersen, Mikael Rørdam

2017-01-01

focused on individual strategies or cell types, but collectively they fall under the broad umbrella of a growing field known as cell factory engineering. Here we condense >130 reviews and key studies in the art into a meta-review of cell factory engineering. We identified 33 generic strategies......-review provides general strategy guides for the broad range of applications of rational engineering of cell factories....

Muon front end for the neutrino factory

Directory of Open Access Journals (Sweden)

C. T. Rogers

2013-04-01

Full Text Available In the neutrino factory, muons are produced by firing high-energy protons onto a target to produce pions. The pions decay to muons and pass through a capture channel known as the muon front end, before acceleration to 12.6 GeV. The muon front end comprises a variable frequency rf system for longitudinal capture and an ionization cooling channel. In this paper we detail recent improvements in the design of the muon front end.

3D thermal climate monitoring in factory buildings

NARCIS (Netherlands)

Posselt, G.; Booij, P.S.; Thiede, S.; Fransman, J.E.; Driessen, B.J.F.; Herrmann, C.

2015-01-01

Guaranteeing defined conditions, such as the temperature levels inside the factory's building shell, is often important to produce high-quality products. Heating, ventilation and air conditioning (HVAC) equipment, as part of the technical building services, is energy intensive and accounts for a

Tau-charm factory..

Energy Technology Data Exchange (ETDEWEB)

Anon.

1995-10-15

In addition to hearing the latest experimental and theoretical developments at the 17th International Symposium on Lepton Photon Interactions in Beijing, delegates were brought up-to-date on the substantial progress towards the realization of a Tau-Charm Factory in the Chinese capital. Opening the Symposium, Zhou Guangzhao, President of the Chinese Academy of Sciences, expressed a commitment of the Chinese government to basic research and its interest in the continuing development high energy physics in China. Following the very successful construction and operation of Beijing's Electron-Positron Collider, BEPC, the Chinese government has provided 5M yuan ($US 600,000) for a feasibility study by the end of 1996 for a Tau-Charm Factory at Beijing's Institute of High Energy Physics (IHEP). Professor Zhou expressed his belief that, once approved, such a factory would greatly enhance high energy physics in China. He warmly welcomed international collaboration both in the construction of the accelerator and in the experimental programme. His comments were reinforced in the following welcome speech by IHEP Director Zheng Zhipeng. Conference delegates had the opportunity to inspect the BEPC injector and collider, built almost entirely by Chinese industry. The International Committee for Future Accelerators (ICFA) met during the Symposium, with Tau- Charm Factory business on the agenda. In his subsequent report, ICFA Chairman John Peoples said that a Tau-Charm Factory provides a unique experimental environment for the precision studies of tau, charm and light quark-gluon spectroscopy, and that some issues in these fields are not satisfactorily addressed solely by B Factories or fixed-target experiments. The committee expressed a strong interest in seeing a Tau-Charm Factory built and noted the serious interest, especially in China, and looks forward to operation and exploitation by the international physics community. In their Beijing summary talks, both Sam Ting and T

Tau-charm factory..

International Nuclear Information System (INIS)

Anon.

1995-01-01

In addition to hearing the latest experimental and theoretical developments at the 17th International Symposium on Lepton Photon Interactions in Beijing, delegates were brought up-to-date on the substantial progress towards the realization of a Tau-Charm Factory in the Chinese capital. Opening the Symposium, Zhou Guangzhao, President of the Chinese Academy of Sciences, expressed a commitment of the Chinese government to basic research and its interest in the continuing development high energy physics in China. Following the very successful construction and operation of Beijing's Electron-Positron Collider, BEPC, the Chinese government has provided 5M yuan ($US 600,000) for a feasibility study by the end of 1996 for a Tau-Charm Factory at Beijing's Institute of High Energy Physics (IHEP). Professor Zhou expressed his belief that, once approved, such a factory would greatly enhance high energy physics in China. He warmly welcomed international collaboration both in the construction of the accelerator and in the experimental programme. His comments were reinforced in the following welcome speech by IHEP Director Zheng Zhipeng. Conference delegates had the opportunity to inspect the BEPC injector and collider, built almost entirely by Chinese industry. The International Committee for Future Accelerators (ICFA) met during the Symposium, with Tau- Charm Factory business on the agenda. In his subsequent report, ICFA Chairman John Peoples said that a Tau-Charm Factory provides a unique experimental environment for the precision studies of tau, charm and light quark-gluon spectroscopy, and that some issues in these fields are not satisfactorily addressed solely by B Factories or fixed-target experiments. The committee expressed a strong interest in seeing a Tau-Charm Factory built and noted the serious interest, especially in China, and looks forward to operation and exploitation by the international physics community. In their Beijing summary talks, both Sam Ting

Survival and growth of freshwater pulmonate and nonpulmonate snails in 28-day exposures to copper, ammonia, and pentachlorophenol

Science.gov (United States)

Besser, John M.; Dorman, Rebecca A.; Hardesty, Douglas K.; Ingersoll, Christopher G.

2016-01-01

We performed toxicity tests with two species of pulmonate snails (Lymnaea stagnalis and Physa gyrina) and four taxa of nonpulmonate snails in the family Hydrobiidae (Pyrgulopsis robusta,Taylorconcha serpenticola, Fluminicola sp., and Fontigens aldrichi). Snails were maintained in static-renewal or recirculating culture systems with adults removed periodically to isolate cohorts of offspring for toxicity testing. This method successfully produced offspring for both species of pulmonate snails and for two hydrobiid species, P. robusta and Fluminicola sp. Toxicity tests were performed for 28 days with copper, ammonia, and pentachlorophenol in hard reconstituted water with endpoints of survival and growth. Tests were started with 1-week-old L. stagnalis, 2-week-old P. gyrina, 5- to 13-week-old P. robusta and Fluminicola sp., and older juveniles and adults of several hydrobiid species. For all three chemicals, chronic toxicity values for pulmonate snails were consistently greater than those for hydrobiid snails, and hydrobiids were among the most sensitive taxa in species sensitivity distributions for all three chemicals. These results suggest that the toxicant sensitivity of nonpulmonate snails in the family Hydrobiidae would not be adequately represented by results of toxicity testing with pulmonate snails.

EPR detection of hydroxyl radical generation and its interaction with antioxidant system in Carassius auratus exposed to pentachlorophenol

Energy Technology Data Exchange (ETDEWEB)

Luo Yi [Key Laboratory of Pollution Processes and Environmental Criteria (Nankai University), Ministry of Education, College of Environmental Sciences and Engineering, Nankai University, Tianjin 300071 (China); Wang Xiaorong, E-mail: yiyluo@gmail.com [State Key Laboratory of Pollution Control and Resources Reuse, School of Environment, Nanjing University, Nanjing 210093 (China); Ji Liangliang; Su Yan [State Key Laboratory of Pollution Control and Resources Reuse, School of Environment, Nanjing University, Nanjing 210093 (China)

2009-11-15

In the present study, direct evidence of hydroxyl radical production in livers of Carassius auratus exposed to pentachlorophenol (PCP) was provided using electron paramagnetic resonance (EPR) with spin-trapping. A dose-effect relationship was obtained between hydroxyl radical intensities and PCP exposure. It was observed that hydroxyl radical was significantly induced by 0.001 mg l{sup -1} (below the criteria for Chinese fishery water quality) of PCP exposure. A strong positive correlation (r = 0.9581, p < 0.001) was observed between PCP liver concentrations and hydroxyl radical intensities within 7 d of PCP exposure, which suggests that hydroxyl radical are mainly produced from PCP itself. However, no correlation was observed between PCP liver concentrations and hydroxyl radical intensities after 7 d, and a higher intensity of hydroxyl radical could still be observed when the PCP liver concentrations decreased to a lower level, which suggests that other mechanisms may possibly contribute to hydroxyl radical production after 7 d. The glutathione/oxidized glutathione (GSH/GSSG) ratio decreased below that of the control level during the entire period of PCP exposure (0.05 mg l{sup -1}), which suggested oxidative stress occurred.

Industrial Systems Biology of Saccharomyces cerevisiae Enables Novel Succinic Acid Cell Factory

DEFF Research Database (Denmark)

Otero, José Manuel; Cimini, Donatella; Patil, Kiran Raosaheb

2013-01-01

Saccharomyces cerevisiae is the most well characterized eukaryote, the preferred microbial cell factory for the largest industrial biotechnology product (bioethanol), and a robust commerically compatible scaffold to be exploitted for diverse chemical production. Succinic acid is a highly sought......-direction of carbon fluxes in S. cerevisiae, and hence show proof of concept that this is a potentially attractive cell factory for over-producing different platform chemicals....

Pentachlorophenol measurements in body fluids of people in log homes and workplaces

Energy Technology Data Exchange (ETDEWEB)

Cline, R.E.; Hill, R.H. Jr.; Phillips, D.L.; Needham, L.L.

1989-07-01

Human exposure to pentachlorophenol (PCP) was evaluated in the normal population (controls), residents of PCP-treated log homes, and persons exposed primarily in the workplace. Blood and urine samples were analyzed by gas chromatography after extraction and acetylation. For 34 controls, serum PCP values ranged from 15-75 ppb with a mean of 40 ppb. For 123 residents of log homes, serum levels ranged from 69-1,340 ppb with a mean of 420 ppb. In such homes, serum levels for children were significantly higher than those for parents, averaging 1.8 times greater. Serum and urine values for workers varied widely, depending on the workplace, with serum levels ranging from 26 to 84,900 ppb of PCP. Urinary concentrations when corrected for creatinine values correlated well (r = 0.92) with serum concentrations. Coating PCP-treated logs of home interiors with a sealant reduced serum PCP levels in the residents.

Assessment of The Asphalt Produced in Some Factories of Asphalt in Al-Hilla City

Directory of Open Access Journals (Sweden)

Mohammed Karem Abd

2018-02-01

Full Text Available The purpose of this study is to present an evaluation of  the properties and characteristics of asphalt concrete of several hot mix asphalt (HMA from five factories in Al-Hilla city. The research is divided into two parts. The first part included the laboratory analysis of samples. The second part is evaluation of results according to standard specifications.      The test results included (Asphalt content percent, stability, creep compliance, voids ratio, density, flow, crushed aggregate percent, Loss Angless abrasion and SO3 percent.The results of laboratorial tests indicated that all properties of asphalt mixes were susceptible and possible to be used in the asphaltic roads. The mixes types prepared and tested according to Marshall method. The values of Marshall stability, creep and density are (9.4, 5.4, 9.8, 9, 8.6, (2.5, 2.7, 2.7, 2.6, 2.3 and (2.334, 2.336, 2.337, 2.333, 2.338 with asphalt content between (4.2 to 4.6 % for all asphalt mixes of different factories.

Cell Factory Stability and Genetic Circuits for Improved Strain Development

DEFF Research Database (Denmark)

Rugbjerg, Peter

. However, all synthetic gene systems -­ including the target metabolic pathways themselves -­ represent a possible fitness burden to the cell and thus constitute a threat to strain stability. In this thesis, several studies served to develop genetic systems for optimizing cell factory development...... systems can challenge the stability of strain designs. A metabolite-­producing Escherichia coli strain was long-­term cultured to study production stability and the dynamic effects of mutations within the cell population. A genetic error landscape of pathway disruptions was identified including particular......Development of new chemical-­‐producing microbial cell factories is an iterative trial-­and-­error process, and to screen candidate cells at high throughput, genetic biosensor systems are appealing. Each biosensor has distinct biological parameters, making modular tuning networks attractive...

KEK: B factory

International Nuclear Information System (INIS)

Anon.

1994-01-01

After more than three years of intensive evaluation, the Japanese government has approved the conversion of the TRISTAN electronpositron collider at the national KEK Laboratory to a two-ring asymmetric B-meson factory. The project will take about five years to complete. Initial construction will proceed while TRISTAN experiments continue datataking, expected to continue until summer 1995. When it becomes operational in 1998, the new facility (TRISTAN II) will be capable of producing more than ten million B meson pairs each year. Detailed studies of their decay properties are expected to reveal answers to the long-standing puzzle of the violation of CP symmetry - combined left-right reversal and particle-antiparticle substitution

Absorption study of pentachlorophenol in persons working with wood preservatives

Energy Technology Data Exchange (ETDEWEB)

Jones, R.D.; Winter, D.P.; Cooper, A.J.

1986-05-01

Plasma and urinary pentachlorophenol (PCP) was measured in 209 workers who had occupational exposure to wood preservatives containing this compound and 101 workers not exposed occupationally to PCP. Workers were examined for chloracne and blood concentrations of bilirubin, gamma-glutamyltransferase (GGT), cholesterol and high-density lipoproteins (HDL) were determined. All the occupationally exposed groups showed evidence of PCP absorption; highest mean concentrations were found in remedial timber-treatment operatives (6.0 mmol/l for plasma and 274 nmol/mmol of creatinine for urine). Timber-yard workers also showed substantial evidence of absorption (mean plasma concentration 4.8 mmol/l). Persons formulating PCP-containing wood preservatives had the lowest concentrations of any exposed group sampled (mean plasma concentration 1.3 mmol/l, mean urinary concentration 39.6 nmol/mmol of creatinine). The occupational groups studied were not standardized for factors known to affect bilirubin, GGT, cholesterol and HDL. The inference that can be drawn from the results of these measurements is therefore limited. There was, however, no evidence of any disadvantageous effect of PCP on health as measured by these parameters. No overt case of chloracne was found.

Innovative analytical method for the determination of underivatized tributyltin and pentachlorophenol in seawater by gas chromatography-triple quadrupole mass spectrometry.

Science.gov (United States)

Amendola, Luca; Cortese, Maria; Vinatoru, Daniela; Sposato, Silvana; Insogna, Susanna

2017-07-04

Tributyltin (TBT) and pentachlorophenol (PCP) are listed as priority substances that warrant monitoring in the European Water Framework Directive (WFD 2000/60/CE), since TBT and PCP were identified as environmental endocrine disruptors and exhibit considerable toxicity toward both aquatic organisms and mammals even at very low levels. This paper shows a novel approach to analyze underivatized tributyltin (TBT) and pentachlorophenol (PCP) in seawater based on capillary gas chromatography-triple quadrupole mass spectrometry. The optimized extraction method for TBT an PCP in water involved liquid-liquid microextraction with toluene. The reduced extract was added with a solvent mix, composed of methanol and trimethylsilyl derivatives of methanol (MeOTMS), that allowed good chromatographic resolution of underivatized TBT and PCP, interacting as a lubricant along the glass liner during the injection phase. The proposed method showed good linearity and repeatability (RSD%<20% at 0.05 ng L -1 for TBT and 0.2 μg L -1 for PCP). The overall recoveries were 74% and 106% for TBT and PCP, respectively. Very low quantification limits that met the strict statutory and regulatory demands were achieved: 0.002 ng L -1 for TBT and 0.050 μg L -1 for PCP. Copyright © 2017 Elsevier B.V. All rights reserved.

Survey of the respiratory health of the workers of a talc producing factory.

OpenAIRE

Wild, P; Réfrégier, M; Auburtin, G; Carton, B; Moulin, J J

1995-01-01

OBJECTIVES--To assess the effect of an occupational exposure to talc dust on respiratory health. METHODS--166 talc millers from a French factory underwent spirometry and filled in a standardised respiratory questionnaire during their annual medical visit in 1989. A full sized chest radiograph taken in 1987 for the subjects hired before 1982 was also available, for the others a radiograph taken when hired was used. Radiography was repeated in 1992 for all subjects still active at this date (n ...

The tau-charm factory: Experimental perspectives

International Nuclear Information System (INIS)

Perl, M.L.; Schindler, R.H.

1991-09-01

This report discusses the Tau-Charm Factory Concept; D and D S Physics at the Tau-Charm Factory; τ and ν τ Physics at the Tau-Charm Factory; and Charmonium, Gluonium and Light Quark Spectroscopy at the Tau-Charm Factory

MODEL PENGELOLAAN TEACHING FACTORY SEKOLAH MENENGAH KEJURUAN

Directory of Open Access Journals (Sweden)

M Burhan R Wijaya

2013-02-01

programs implemented are described in the form of data presentation, and then analyzed (interpreted qualitative. The process and results of design development done in a peer-group analysis and expert judgment. And the results of trials presented in the form of data as well as design (applicability were analyzed by descriptive qualitative. Teaching Factory management model developed can be applied in the management of Teaching Factory for Vocational School and serves as a guide for managers Teaching Factory (principals, teachers, industry partners and can produce a constructive contribution in a partnership between Vocational Schools with industry.

Review of kaon factory proposals

International Nuclear Information System (INIS)

Thiessen, H.A.

1985-01-01

Nuclear physics issues and particle physics issues for a kaon factory are discussed. Kaon factory accelerator proposals are then considered. Secondary beam considerations are covered and hardware development for a kaon factory is discussed. The prospects for construction are presented. 9 refs., 12 figs., 2 tabs

Oxidative degradation of pentachlorophenol by permanganate for ISCO application.

Science.gov (United States)

Matta, Roger; Chiron, Serge

2018-03-01

Potassium permanganate (KMnO 4 ) has been an effective technology for the in situ chemical oxidation (ISCO) of many organic compounds including chlorinated alkanes and alkenes, but it has rarely been applied for oxidizing aromatic organochlorines. This study confirms the ability of permanganate to oxidize an aromatic chlorinated compound, pentachlorophenol (PCP), in an efficient manner at neutral pH. The rate of the reaction between KMnO 4 and PCP was calculated and the results indicated that the reaction between PCP and permanganate is relatively fast with a second-order rate constant k″ ∼ 30 M -1  s -1 . Besides the kinetic aspect, the authors identified the main reaction by-products, and proposed a possible reaction mechanism scheme. The general pathway shows the formation of chlorinated intermediates, and ultimately, the complete mineralization to chloride, water, and CO 2 confirmed by total organic carbon and chloride measurement in solution. Flow-through column experiments, consisting of flushing a PCP-contaminated sandy or natural soil with oxidant, showed the good ability of permanganate to eliminate the pollutant. After 24 h of treatment, 77% and 56% of PCP abatement were obtained for sandy and natural soil, respectively. These findings show the high potential of permanganate for the in situ remediation of aromatic organochlorine contaminated soils.

Limit values in special agreements between factories and sewage works

International Nuclear Information System (INIS)

Lundstroem, Yrjoe

1987-01-01

The operation of sewage works is controlled in Finland by the water and health authorities. These authorities set special quality demands for the effluent from sewage treatment plants into the recipient. Also other wastes from treatment plants, mainly sludges, have special regulations and operational target values. Sewage works have to achieve the aim goals and limit values set. In order to fulfill the regulations, sewage works impose such limit values on factory wastewaters that there will be no problems at the treatment plants. Sewage works can act in two ways: - require the factory to operate in such a way that the limit values are not exceeded, - the factory pays a certain sum of money to the sewage works, which takes care of the whole problem. It can be said in general, that it is not possible to get rid of harmful substances by payment to the sewage works if the substances cause treatment problems or problems in sludge disposal. If the factory produces wastewater that contains a higher organic load, more suspended solids or a higher nutrient load than normal sanitary wastewater, the problem is most often solved by paying an extra fee to the sewage works

E+e- linear collider B-barB factory for rare B decay studies

International Nuclear Information System (INIS)

Cline, D.B.

1987-01-01

We outline the physics goals of a B-barB factory to produce greater than 10 8 B 0 /sub d/, B/sup +- / per year. Emphasis is placed on the search for large CP violating effects in rare B decays. An e + e - linear collider is proposed for the B-barB factory and a preliminary estimate of the parameters of the machine that might reach L = 10 34 cm -2 sec -1 is given

Superconducting cavities for beauty factories

International Nuclear Information System (INIS)

Lengeler, H.

1992-01-01

The possibilities and merits of superconducting accelerating cavities for Beauty-factories are considered. There exist already large sc systems of size and frequency comparable to the ones needed for Beauty-factories. Their status and operation experience is discussed. A comparison of normal conducting and superconducting systems is done for two typical Beauty-factory rings

Portable Material Culture and Death Factory Auschwitz

Directory of Open Access Journals (Sweden)

Adrian T. Myers

2007-11-01

Full Text Available Like any other factory, the death factory of Auschwitz consumed primary materials and produced secondary products. Unique to Auschwitz, though, is that the primary material consumed was human life; not just the life of the breathing human body, but also the material possessions associated with that life. The detritus of this most efficient genocide – clothing, jewellery, food, corpses – was appropriated and put to new uses by the SS and the prisoners. Others have recognised the various postwar material cultural outcomes of the camp: the writing, the film, the theatre, the art, the tourism. This article, however, demonstrates that the material culture of Auschwitz is not a phenomenon exclusive to the postwar era. It focuses on the fact that inside the camp during the war, despite the landscape of death and deprivation, intimate interaction between humans and material culture continued.

Capabilities of Seven Species of Aquatic Macrophytes for Phytoremediation of Pentachlorophenol Contaminated Sediment

Science.gov (United States)

Zhao, Liangyuan; Guo, Weijie; Li, Qingyun; Li, Huan; Zhao, Weihua; Cao, Xiaohuan

2017-01-01

Sediments are regarded as the ultimate sink of pentachlorophenol(PCP) in aquatic environment, and capabilities of seven species of aquatic macrophytes for remediating PCP contaminated sediment were investigated. Seven species of aquatic macrophytes could significantly accelerate the degradation of PCP in sediments. Among all, canna indica L., Acorus calamus L. and Iris tectorum Maxim. can be used as efficient alternative plants for remediation of PCP contaminated sediment, which attained 98%, 92% and 88% of PCP removal in sediments, respectively. PCP was detected only in root tissues and the uptake was closely related to the root lipid contents of seven plants. The presence of seven aquatic macrophytes significantly increased microbial populations and the activities of dehydrogenase compared with control sediments, indicating that rhizosphere microorganism played important role in the remediation process. In conclusion, seven species of aquatic macrophytes may act as promising tools for the PCP phytoremediation in aquatic environment, especially Canna indica L., Acorus calamus L. and Iris tectorum Maxim.

Gamma radiation treatment of pentachlorophenol, 2,4-dichlorophenol and 2-chlorophenol in water

International Nuclear Information System (INIS)

He Yongke; Liu Jun; Wu Jilan

2001-01-01

The aim of this work was to investigate γ radiation treatment of pentachlorophenol (PCP), 2,4- dichlorophenol (DCP) and o-chlorophenol (o-CP) in water. The dechlorination of PCP, DCP and o-CP has been studied using γ radiation as well as ozonization. G(CI-) is always much higher than the corresponding G(-PCP),this means that some primary radiolytic products are unstable during post irradiation. PCP is much easier to be decomposed under irradiation than that of simple chlorophenol. Some stable radiolytic intermediates were be detected. Primary analysis reveals some quinones among the final products with toxicity that remains unclear. In the pulse radiolytic experiment, it was determined that about 53% of radicals undergo electrotransfer and others undergo addition when OH radicals react with PCP. The values of COD(Mn) after irradiating PCP in dosage were determined. It is recommended to bubble ozone simultaneously when radiation (or electron beam) treat CPs contaminating water. (author)

The TRIUMF KAON Factory

International Nuclear Information System (INIS)

Craddock, M.K.

1990-11-01

The TRIUMF KAON Factory is designed to produce beams of kaons, antiprotons, other hadrons and neutrinos 100 times more intense, or cleaner, than are available now, for a broad range of experiments in particle and nuclear physics. This will require a 100 μA beam of 30 GeV protons, to be produced by an interleaved sequence of two fast-cycling synchrotrons and three storage rings, with the existing TRIUMF H - cyclotron as injector. An $11-million preconstruction study has enabled the overall design to be reviewed and prototypes of various accelerator components to be built and evaluated. Environmental, industrial and economic impact studies have also been completed. Payment of one-third of the total cost of $708 million (Canadian) has been approved by the government of British Columbia; a further third is expected from international sources, on the basis of inter-governmental consultations. A decision on the final third is expected from the government of Canada before the end of 1990. (Author) (15 refs., 7 figs.)

FFAG Designs for the International Design Study for the Neutrino Factory

Energy Technology Data Exchange (ETDEWEB)

Berg, J.S.; Machida, S.

2009-05-04

The International Design Study for the Neutrino Factory (IDS-NF) aims to produce a design report for a neutrino factory. One component of that design is a linear nonscaling fixed-field alternating gradient accelerator (FFAG) that will accelerate to the final energy of 25 GeV. An FFAG is used to reduce the machine cost by maximizing the number of passes made through the RF cavities. We present some design options for this FFAG, individually optimized for cost. We study the addition of nonlinear magnets to the lattice to improve the performance of the lattice and consider the negative effects of doing so.

Evaluation of Complex Toxicity of Canbon Nanotubes and Sodium Pentachlorophenol Based on Earthworm Coelomocytes Test.

Directory of Open Access Journals (Sweden)

Yang Yang

Full Text Available As a standard testing organism in soil ecosystems, the earthworm Eisenia fetida has been used widely in toxicity studies. However, tests at the individual level are time- and animal-consuming, with limited sensitivity. Earthworm coelomocytes are important for the assimilation and elimination of exogenous compounds and play a key role in the processes of phagocytosis and inflammation. In this study, we explored an optimal condition to culture coelomocytes of E. fetida in vitro and investigated the cytotoxicity of multiwalled carbon nanotubes (MWCNTs and sodium pentachlorophenol (PCP-Na using coelomocytes via evaluating lethal toxicity, oxidative stress, membrane damage, and DNA damage. The results showed that coelomocytes can be successfully cultured in vitro in primary under the RPMI-1640 medium with 2-4×104 cells/well (1-2×105 cells/mL in 96-well plates at 25°C without CO2. Both MWCNTs and PCP-Na could cause oxidative damage and produce ROS, an evidence for lipid peroxidation with MDA generation and SOD and CAT activity inhibition at high stress. The two chemicals could separately damage the cell membrane structure, increasing permeability and inhibiting mitochondrial membrane potential (MMP. In addition, our results indicate that PCP-Na may be adsorbed onto MWCNTs and its toxicity on earthworm was accordingly alleviated, while a synergetic effect was revealed when PCP-Na and MWCNTs were added separately. In summary, coelomocyte toxicity in in vitro analysis is a sensitive method for detecting the adverse effects of carbon nanotubes combined with various pollutants.

Towards energy transparent factories

CERN Document Server

Posselt, Gerrit

2016-01-01

This monograph provides a methodological approach for establishing demand-oriented levels of energy transparency of factories. The author presents a systematic indication of energy drivers and cost factors, taking into account the interdependencies between facility and production domains. Particular attention is given to energy flow metering and monitoring. Readers will also be provided with an in-depth description of a planning tool which allows for systematically deriving suitable metering points in complex factory environments. The target audience primarily comprises researchers and experts in the field of factory planning, but the book may also be beneficial for graduate students.

Deciding WQO for factorial languages

KAUST Repository

Atminas, Aistis; Lozin, Vadim V.; Moshkov, Mikhail

2013-01-01

A language is factorial if it is closed under taking factors (i.e. contiguous subwords). Every factorial language can be described by an antidictionary, i.e. a minimal set of forbidden factors. We show that the problem of deciding whether a factorial language given by a finite antidictionary is well-quasi-ordered under the factor containment relation can be solved in polynomial time. © 2013 Springer-Verlag Berlin Heidelberg.

Deciding WQO for factorial languages

KAUST Repository

Atminas, Aistis

2013-04-05

A language is factorial if it is closed under taking factors (i.e. contiguous subwords). Every factorial language can be described by an antidictionary, i.e. a minimal set of forbidden factors. We show that the problem of deciding whether a factorial language given by a finite antidictionary is well-quasi-ordered under the factor containment relation can be solved in polynomial time. © 2013 Springer-Verlag Berlin Heidelberg.

In-Factory Learning - Qualification For The Factory Of The Future

Science.gov (United States)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

PENINGKATAN PENCAPAIAN KUALITAS LULUSAN D3 TEKNIK ELEKTRO DENGAN MODEL TEACHING FACTORY

Directory of Open Access Journals (Sweden)

Elsanda Merita Indrawati

2017-02-01

Full Text Available The purpose of this study, namely: (1 determine systematically theimplementation of teaching factory model of the learning process D3 electrical engineering; (2 determine the achievement quality D3 graduate in electrical engineering and Teaching Factory models. The approach used is a qualitative approach, data collection techniques through observation, interviews, documentation. Results of the assessment showed that the implementation of teaching factory model of the learning process D3 Electrical Engineering done quite well, starting from the standard of competence, media, lecturers, students, use and maintenance, production, marketing, evaluation has been structured well enough. But there are still shortcomings in the establishment of management due to the formation of management, the management structure remains unclear resulted in the implementation of the model is less than the maximum teachingfactory in the Department of Electrical Engineering D3. Implementation ofteaching factory in D3 Electrical Engineering UN PGRI Kediri has been goingpretty well, the resulting product has a quality worth selling, economical and multifunctional, the students are expected after graduation in addition to be absorbed in the industrialized world are working as interpreneur and employers on the products they produce so with the application of teaching factory, the quality D3 Electrical Engineering increasing

RI beam factory project at RIKEN

CERN Document Server

Motobayashi, T

2003-01-01

Construction of the RI beam factory project in the first phase has started. The aim of the project is to provide intense radio-isotopes (RI) beams at energies of several hundred MeV/nucleon in a wide range of atomic masses. These beams will be produced by the projectile fragmentation of primary beams accelerated by a cascade of the existing ring cyclotron and a series of new ring cyclotrons. Improvements of the existing facility made for the new cyclotron complex have extended the energy range of available beams, which already opened new domains of study.

The Smart Factory

DEFF Research Database (Denmark)

Radziwon, Agnieszka; Bilberg, Arne; Bogers, Marcel

2014-01-01

Nowadays we live in a world, which a decade ago would only be described in the science fiction literature. More and more things become smart and both scientists and engineers strive for developing not only new and innovative devices, but also homes, factories, or even cities. Despite of continuous...... development, many of those concepts are still being just a vision of the future, which still needs a lot of effort to become true. This paper reviews the usage of adjective smart in respect to technology and with a special emphasis on the smart factory concept placement among contemporary studies. Due...... to a lack of a consensus of common understanding of this term, a unified definition is proposed. The conceptualization will not only refer to various smart factory visions reported in the literature, but also link the crucial characteristics of this emerging manufacturing concept to usual manufacturing...

Metabolism of pentachlorophenol in cell suspension cultures of wheat (Triticum aestivum L.). Tetrachlorocatechol as a primary metabolite

International Nuclear Information System (INIS)

Schaefer, W.; Sandermann, H. Jr.

1988-01-01

Wheat cell suspension cultures were incubated with [U- 14 C] pentachlorophenol (PCP; 1 ppm, 48 h, 27 0 C). Soluble metabolites were formed in ∼ 50% yield, another ∼ 31% of the applied radioactivity being incorporated into the insoluble residue. The soluble metabolite fraction, and its β-D-glucoside conjugate components, the total insoluble residue, and its lignin components, were all found to contain a novel polar PCP derivative besides smaller amounts of tetrachlorohydroquinone and PCP. The novel derivative also predominated in intact wheat plants and was identified as tetrachlorocatechol by TLC, HPLC, GC, and EI as well as CI mass spectroscopy. Tetrachlorocatechol is a potential mutagen, so that the soluble and insoluble conjugates formed in wheat from PCP may present a toxicological hazard

Collimation issues for the PEP-II B-factory

International Nuclear Information System (INIS)

Sullivan, M.

1997-12-01

This note describes how beam collimation affects detector backgrounds at the collision point for the PEP-II B-factory, a joint effort of three laboratories: LBNL, LLNL, and SLAC. Beam collimation controls the transverse size as well as the maximum allowed energy spread of the beam. The location of synchrotron radiation masks is determined by the transverse size of the beam in that the masks must prevent radiation generated by beam particles located at large transverse beam positions from directly striking the detector beam pipe. Collimation of the energy spread of the beam is important in the control of backgrounds produced by beam particles that strike a gas molecule (lost beam particles). The author describes some preliminary information from background studies during the first months of commissioning the high energy ring of the PEP-II B-factory and present some model predictions for synchrotron radiation backgrounds when collimators are not present

Effect of phosphorus addition on the reductive transformation of pentachlorophenol (PCP) and iron reduction with microorganism involvement.

Science.gov (United States)

Wang, Yongkui; Liu, Xianli; Huang, Jiexun; Xiao, Wensheng; Zhang, Jiaquan; Yin, Chunqin

2017-10-01

The transformation of phosphorus added to the soil environment has been proven to be influenced by the Fe biochemical process, which thereby may affect the transformation of organic chlorinated contaminants. However, the amount of related literatures regarding this topic is limited. This study aimed to determine the effects of phosphorus addition on pentachlorophenol (PCP) anaerobic transformation, iron reduction, and paddy soil microbial community structure. Results showed that the transformation of phosphorus, iron, and PCP were closely related to the microorganisms. Moreover, phosphorus addition significantly influenced PCP transformation and iron reduction, which promoted and inhibited these processes at low and high concentrations, respectively. Both the maximum reaction rate of PCP transformation and the maximum Fe(II) amount produced were obtained at 1 mmol/L phosphorus concentration. Among the various phosphorus species, dissolved P and NaOH-P considerably changed, whereas only slight changes were observed for the remaining phosphorus species. Microbial community structure analysis demonstrated that adding low concentration of phosphorus promoted the growth of Clostridium bowmanii, Clostridium hungatei, and Clostridium intestinale and Pseudomonas veronii. By contrast, high-concentration phosphorus inhibited growth of these microorganisms, similar to the curves of PCP transformation and iron reduction. These observations indicated that Clostridium and P. veronii, especially Clostridium, played a vital role in the transformation of related substances in the system. All these findings may serve as a reference for the complicated reactions among the multiple components of soils.

Qatar, the gas factory of the world; Le Qatar, l'usine a gaz du monde

Energy Technology Data Exchange (ETDEWEB)

Dupin, L.

2010-11-15

This article describes the huge development of a natural gas industrial site in Qatar through which this country will soon become the first world liquefied natural gas producer. It also describes the huge works in which the French company Technip is involved on this site which comprises gas production factories, a polyethylene factory, electricity and water supply buildings, storage tanks, a harbour for gas carriers

PCs in the factory

CERN Document Server

2013-01-01

Please note this is a short discount publication.PCs have become as essential to the factory environment as they are to the office environment. This in-depth report examines how specially adapted PCs and peripherals are being established in Factory Process Control and Reporting. The report covers: * Hardware and Software* Typical Applications* Implementation Issues* Case Studies and Real Applications

problems in spinning in kolfe house-hold utencil factory abstract ...

African Journals Online (AJOL)

Kolfe House-Hold Utensil Factory in Addis Ababa, is producing different types of utensils for house-hold use from commercial aluminium. Deep drawing or/and spinning are the methods used for shaping this metal to desired shape and size, though some small parts are cast too. One of their products is kettle, which is.

The Layout of Power and Space in Jingdezhen Imperial Factory

Directory of Open Access Journals (Sweden)

Zhan Jia

2014-12-01

Full Text Available This paper, by referring to the archaeological reports and local gazetteers and comparing images of porcelain wares, makes a comprehensive and in-depth analysis of the layout of power and space in Jingdezhen Imperial Factory according to its geography, geomancy, security management, space regulation, architectural features, production characteristics and production layout. It contends that the Imperial Factory which integrates porcelain making factory with local government is the embodiment of absolute monarchy in ceramic culture. The factory is located on Zhushan mountain, the center of Jingdezhen’s industry, business and transportation. Being at the center, it gives off an air of prestige and majesty, overlooking dominantly the surrounding private kilns. It has also turned the political system into power operation, setting up not only workshops but also administrative offices. By taking advantage of the best resources, it has produced porcelain for imperial family and court. Its specialized production has solved the contradiction between complicated technology and numerous procedures of production. The shape, color and pattern of the porcelain wares are strictly stipulated and the best of the best wares are demanded. Hence the porcelain production is featured with longest firing, largest scale, superb craftsmanship, and best kinds of wares. All of these reveal the process and rule power and space are intersected and different cultures overlapped.

The TRIUMF KAON factory

International Nuclear Information System (INIS)

Craddock, M.K.

1991-05-01

The TRIUMF KAON Factory is designed to produce beams of kaons, antiprotons, other hadrons and neutrinos 100 times more intense, or cleaner, than are available now, for a broad range of particle and nuclear physics experiments. This will require a 100 μA beam of 30 GeV protons, to be produced by an interleaved sequence of two fast-cycling synchrotrons and three storage rings, with the existing TRIUMF H - cyclotron as injector. An $11-million preconstruction study has enabled the overall design to be reviewed and prototypes of various components to be built and evaluated -fast-cycling dipole and quadrupole magnets, a dual-frequency magnet power supply, ceramic beam pipes with internal RF shields, an RF cavity (using perpendicular bias), an extraction kicker, and RF beam chopper, and production targets. Environmental, industrial and economic impact studies have also been completed and the cost estimates and schedule updated. The total cost of $708 million (Canadian) will be shared equally between Canada, British Columbia (already approved) and international contributors. The federal decision is expected shortly. (Author) 29 refs., 5 figs

Biomonitoring for creosote and pentachlorophenol in nearby residents of a wood treatment plant

Energy Technology Data Exchange (ETDEWEB)

Dahlgren, J. [UCLA School of Medicine, CA (United States); Schecter, A. [Univ. of Texas School of Public Health, Dallas, TX (United States); Phillips, D.H.; Hewer, A. [Inst. of Cancer Research, Sutton, Surrey (United Kingdom); Takhar, H. [Comprehensive Health Screening Services, Santa Monica, CA (United States); Paepke, O. [ERGO Lab., Hamburg (Germany); Warshaw, R. [Workers' Disease Detection Services, Inc. (United States)

2004-09-15

Contaminated wood treatment sites can result in adverse health effects to nearby residents. Environmental exposure can be estimated by measuring concentrations of pollutants in air, water, food, or wipe tests. This environmental exposure value can be used as a surrogate to estimate individual exposure. The objective of this study was to determine whether or not pentachlorophenol (PCP) could be found in potentially exposed residents and if the dioxin levels are consistent with PCP exposure. A further objective of the study was to determine whether or not PAH-DNA adducts could be found in the potentially exposed residents. We present results of biomonitoring studies in residents living near a wood treatment plant that used coal-derived creosote and PCP to process and treat wood for over 100 years. The plant was built in 1904 and used creosote and PCP. Creosote is a complex mixture that contains numerous polycyclic aromatic hydrocarbons (PAHs). PCP is contaminated with polychlorinated dioxin and furans. The residents' exposure pathways include air, soil and surface water.

Optimization of a furniture factory layout

Directory of Open Access Journals (Sweden)

Tadej Kanduč

2015-03-01

Full Text Available This paper deals with the problem of optimizing a factory floor layout in a Slovenian furniture factory. First, the current state of the manufacturing system is analyzed by constructing a discrete event simulation (DES model that reflects the manufacturing processes. The company produces over 10,000 different products, and their manufacturing processes include approximately 30,000 subprocesses. Therefore, manually constructing a model to include every subprocess is not feasible. To overcome this problem, a method for automated model construction was developed to construct a DES model based on a selection of manufacturing orders and relevant subprocesses. The obtained simulation model provided insight into the manufacturing processes and enable easy modification of model parameters for optimizing the manufacturing processes. Finally, the optimization problem was solved: the total distance the products had to traverse between machines was minimized by devising an optimal machine layout. With the introduction of certain simplifications, the problem was best described as a quadratic assignment problem. A novel heuristic method based on force-directed graph drawing algorithms was developed. Optimizing the floor layout resulted in a significant reduction of total travel distance for the products.

Engineering tolerance to industrially relevant stress factors in yeast cell factories.

Science.gov (United States)

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R; Thevelein, Johan M

2017-06-01

The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. © FEMS 2017.

Engineering tolerance to industrially relevant stress factors in yeast cell factories

Science.gov (United States)

Deparis, Quinten; Claes, Arne; Foulquié-Moreno, Maria R.

2017-01-01

Abstract The main focus in development of yeast cell factories has generally been on establishing optimal activity of heterologous pathways and further metabolic engineering of the host strain to maximize product yield and titer. Adequate stress tolerance of the host strain has turned out to be another major challenge for obtaining economically viable performance in industrial production. Although general robustness is a universal requirement for industrial microorganisms, production of novel compounds using artificial metabolic pathways presents additional challenges. Many of the bio-based compounds desirable for production by cell factories are highly toxic to the host cells in the titers required for economic viability. Artificial metabolic pathways also turn out to be much more sensitive to stress factors than endogenous pathways, likely because regulation of the latter has been optimized in evolution in myriads of environmental conditions. We discuss different environmental and metabolic stress factors with high relevance for industrial utilization of yeast cell factories and the experimental approaches used to engineer higher stress tolerance. Improving stress tolerance in a predictable manner in yeast cell factories should facilitate their widespread utilization in the bio-based economy and extend the range of products successfully produced in large scale in a sustainable and economically profitable way. PMID:28586408

Preserving the Modernist Vertical Urban Factory

Directory of Open Access Journals (Sweden)

Nina Rappaport

2016-07-01

Full Text Available This essay is adapted in part, from the section, “Modern Factory Architecture” case studies from Nina Rappaport’s book Vertical Urban Factory, published by Actar this spring. Vertical Urban Factory began as an architecture studio, and then an exhibition, which opened in New York in 2011 and traveled to Detroit and Toronto in 2012. Last year the show was displayed at Archizoom at EPFL in Lausanne; Industry City, Brooklyn; and the Charles Moore School of Architecture at Kean University, in New Jersey. The project continues as a think tank evaluating factory futures and urban industrial potential.

Factorial structure of aerobics athletes’ fitness

Directory of Open Access Journals (Sweden)

T.V. Shepelenko

2017-11-01

Full Text Available The purpose of the research is to develop an algorithm of teams’ formation in sport aerobics and to define factorial structure of athletes’ fitness. Material : in the research sport aerobics’ athletes (n=19 participated. All athletes are members of Kharkiv national team (Ukraine. All athletes underwent complete medical examination. The functional condition of an organism (arterial blood pressure, indicators of a variability of the rhythm of the heart, treadbahn testing, psycho-physiological state (time’s determination of simple and complex reaction were defined. The physical development and physical fitness and stability of vestibular system were also defined. The factorial and cluster analysis were used. Results : The algorithm of teams’ formation in sport aerobics is developed for performances in various competitive categories. The algorithm contains all stages of standard procedure of the factorial and cluster analysis. In the factorial analysis the individual factorial values were also defined. Conclusions : The obtained data are recommended to be used at teams’ formation for performances in various competitive categories: team formation for pair and group performances. The general and individual factorial structure of athletes’ complex fitness is defined. It is possible to select athletes with similar qualities and with different qualities for the mixed performances. The determination of individual factorial structure of fitness permits to estimate objectively variants of athletes’ formation in groups.

Producing charcoal from wastes

Energy Technology Data Exchange (ETDEWEB)

Pogorelov, V.A.

1983-01-01

Experimental works to use wood wastes for producing charcoal are examined, which are being conducted in the Sverdlovsk assembly and adjustment administration of Soyuzorglestekhmontazh. A wasteless prototype installation for producing fine charcoal is described, along with its subsequent briqueting, which is made on the basis of units which are series produced by the factories of the country. The installation includes subassemblies for preparing and drying the raw material and for producing the charcoal briquets. In the opinion of specialists, the charcoal produced from the wastes may be effectively used in ferrous and nonferrous metallurgy and in the production of pipes.

SuperB: A High-Luminosity Asymmetric e+e- Super Flavor Factory

Energy Technology Data Exchange (ETDEWEB)

Bona, M.; /et al.

2007-05-18

We discuss herein the exciting physics program that can be accomplished with a very large sample of heavy quark and heavy lepton decays produced in the very clean environment of an e{sup +}e{sup -} collider; a program complementary to that of an experiment such as LHCb at a hadronic machine. It then presents the conceptual design of a new type of e{sup +}e{sup -} collider that produces a nearly two-order-of-magnitude increase in luminosity over the current generation of asymmetric B Factories. The key idea is the use of low emittance beams produced in an accelerator lattice derived from the ILC Damping Ring Design, together with a new collision region, again with roots in the ILC final focus design, but with important new concepts developed in this design effort. Remarkably, SuperB produces this very large improvement in luminosity with circulating currents and wallplug power similar to those of the current B Factories. There is clear synergy with ILC R&D; design efforts have already influenced one another, and many aspects of the ILC Damping Rings and Final Focus would be operationally tested at SuperB. Finally, the design of an appropriate detector, based on an upgrade of BABAR as an example, is discussed in some detail. A preliminary cost estimate is presented, as is an example construction timeline.

S.I. No 17 of 1972, Factories Ionising Radiations (Sealed Sources) Regulations, 1972

International Nuclear Information System (INIS)

1972-03-01

The purpose of the Regulations in general is to prescribe measures which must be taken to ensure the adequate protection of persons employed in factories and other places to which the Factories Act 1955 applies, against ionizing radiations arising from radioactive substances sealed in a container and from any machine or apparatus including irradiating apparatus that is intended to produce ionizing radiations in which charged particles are accelerated by a voltage of not less than 5 kilovolts. The Schedule lays down the maximum permissible doses of radiation for the different categories of workers. The Regulations entered into force on 1 March 1972 [fr

MapFactory - Towards a mapping design pattern for big geospatial data

Science.gov (United States)

Rautenbach, Victoria; Coetzee, Serena

2018-05-01

With big geospatial data emerging, cartographers and geographic information scientists have to find new ways of dealing with the volume, variety, velocity, and veracity (4Vs) of the data. This requires the development of tools that allow processing, filtering, analysing, and visualising of big data through multidisciplinary collaboration. In this paper, we present the MapFactory design pattern that will be used for the creation of different maps according to the (input) design specification for big geospatial data. The design specification is based on elements from ISO19115-1:2014 Geographic information - Metadata - Part 1: Fundamentals that would guide the design and development of the map or set of maps to be produced. The results of the exploratory research suggest that the MapFactory design pattern will help with software reuse and communication. The MapFactory design pattern will aid software developers to build the tools that are required to automate map making with big geospatial data. The resulting maps would assist cartographers and others to make sense of big geospatial data.

Positron Factory project

Energy Technology Data Exchange (ETDEWEB)

Okada, Sohei; Sunaga, Hiromi; Kaneko, Hirohisa; Kawasuso, Atsuo; Masuno, Shin-ichi; Takizawa, Haruki; Yotsumoto, Keiichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1997-03-01

We have started drafting a construction program for the Positron Factory, in which linac-based intense monoenergetic positron beams are planned to be applied for materials science, biotechnology and basic physics and chemistry. A technical survey study confirmed the feasibility of manufacturing a dedicated electron linac of 100 kW class with a beam energy of 100 MeV, which will produce a world-highest monoenergetic positron beam of more than 10{sup 10}/sec in intensity. A self-driven rotating converter (electrons to positrons and photons) suitable for the high power electron beam was devised and successfully tested. The practicability of simultaneous extraction of multi-channel monoenergetic positron beams with multiple moderator assemblies, which had been originated on the basis of a Monte Carlo simulation, was demonstrated by an experiment using an electron linac. An efficient moderator structure, which is composed of honeycomb-like assembled moderator foils and reflectors, is also proposed. (author)

Pentachlorophenol removal from aqueous matrices by sorption with almond shell residues

International Nuclear Information System (INIS)

Estevinho, B.N.; Ratola, N.; Alves, A.; Santos, L.

2006-01-01

Sorption with activated carbon has been the technique preferred for pentachlorophenol (PCP) removal from contaminated waters, but regeneration needs and high operation costs are supporting a renewed interest in the search for alternative sorbents. Among them, almond shell, an agricultural by-product, provides interesting economical advantages, once shells account for 50% (in mass) of the whole almond. In this work, the capacity of almond shells to remove PCP from waters without previous activation was studied in batch conditions. While PCP analysis was performed solid-phase microextraction (SPME) followed by gas chromatography with electron capture detection (GC-ECD), mercury porosimetry and Fourier transform infrared spectroscopy (FTIR) provided a preliminary physical and chemical characterization of the sorbent. Almond shells were essentially a macroporous material, with an average surface area of 12.9 ± 2.8 m 2 /g. The efficiency of PCP removal was 93 ± 14%, in 24 h, with an initial concentration of 100 μg/l PCP and 5 μg PCP/g shell. Isotherm data adjusted better to Freundlich equation, where K F and 1/n were 0.075 ± 0.081 mg 1-1/n l 1/n and 1.882 ± 0.289, respectively. Average desorption efficiency was 7%, indicating strong adsorption capacity. Results proved that almond shells may be an excellent low-cost alternative for PCP removal from contaminated waters

Comparative toxicity of pentachlorophenol to three earthworm species in artificial soil

Energy Technology Data Exchange (ETDEWEB)

Fitzgerald, D.; Lanno, R.P.; Farwell, A.; Dixon, D.G. [Univ. of Waterloo, Ontario (Canada). Dept. of Biology

1994-12-31

Although methods for standardized toxicity tests with earthworms exist, many of the test parameters and conditions have not been validated in actual tests and with different species of worms. This study evaluated the toxicity of pentachlorophenol (PCP) to three species of earthworms, Lumbricus terrestris, Eisenia fetida, and Eudrilus eugeniae using various methods of data analysis and body residues. Tests were conducted in artificial soil for a period of 28 days or until an Acute Lethality Threshold (ALT) was reached. An intensive temporal sampling regime was applied to generate sufficient data for the accurate estimation of ALTs using both LC50/time and time-to-death/soil concentration methods of data analysis. L. terrestris was tested at 15 C, E. eugeniae at 24 C, and E. fetida at both temperatures. Total body residues of PCP were measured by GC following cryogenic separation of the lipid fraction of the worm. ALTs were significantly different between E. fetida and the two larger species of worms. No effect of temperature on the ALT for E. fetida was observed, although the time taken to reach the ALT increased at the lower temperature. The relationship of PCP residues at mortality will be discussed in terms of the effects of species, body size and temperature. Limitations of the artificial soil based upon growth curves of worms will also be examined.

Positive examples of wastewater treatment effectiveness in ‘Natron-Hayat’ Maglaj factory

Directory of Open Access Journals (Sweden)

Bušatlić Ilhan

2017-01-01

Full Text Available In the paper are described the basic characteristics of wastewaters in the cellulose and paper factory ‘Natron-Hayat’ Maglaj. Particular emphasis is placed on the description of the technological process of wastewater treatment at the ‘Natron-Hayat’ Maglaj factory which is represented in the paper by a technological scheme and represents one of the more complex systems for wastewater treatment. In the experimental part, the results of the efficiency of the wastewater treatment system at the ‘Natron-Hayat’ Maglaj factory were given. It can be said that the basic raw materials for paper production are cellulose fibers and water. The role that water has in the cellulose and paper industry as the solvent, agent for cooking and washing of the produced pulp, indicates the presence of water in almost all stages of cellulose fiber production (Žarković et al., 2004. In accordance with the principles of sustainable development, cellulose and paper industry must face strict regulations on the protection of the environment which includes rationalization of raw material consumption, water, energy and chemicals, with ‘Natron-Hayat’ Maglaj are subjected to the purification before discharging into surface water recipient. The wastewaters from ‘Natron-Hayat’ Maglaj factory are discharged into river Bosna.

SatisFactory Final System Evaluation Report

OpenAIRE

Sunlight SA

2018-01-01

The present document is a deliverable of the SatisFactory project, funded by the European Commission’s Directorate-General for Research and Innovation (DG RTD), under its Horizon 2020 Research and innovation programme (H2020). The main objective of this deliverable is to report on the SatisFactory Final System Evaluation, with regards to the industrial pilots at COMAU and SUNLIGHT. The evaluation of SatisFactory platform is based on the implementation of the business scenarios where each tool...

WQO is Decidable for Factorial Languages

KAUST Repository

Atminas, Aistis

2017-08-08

A language is factorial if it is closed under taking factors, i.e. contiguous subwords. Every factorial language can be described by an antidictionary, i.e. a minimal set of forbidden factors. We show that the problem of deciding whether a factorial language given by a finite antidictionary is well-quasi-ordered under the factor containment relation can be solved in polynomial time. We also discuss possible ways to extend our solution to permutations and graphs.

Bunch-motion feedback for B-factories

International Nuclear Information System (INIS)

Lambertson, G.R.

1992-09-01

The colliding electron and positron beams in a B-factory must have average current of one ampere or more to produce the required luminosity. The high current interacts with structures in the beam tube to drive strong coupled-bunch (c.b.) instabilities. To suppress these instabilities requires negative feedback of the bunch motions. Beam impedances arising from strong rf cavity modes should first be reduced to make the required feedback damping rate practical and the cost economical. In what follows, control of transverse motions will be discussed first, then longitudinal. We shall use the parameters of the 3.1 GeV ring of PEP-II to illustrate the general requirements

Baby factories taint surrogacy in Nigeria.

Science.gov (United States)

Makinde, Olusesan Ayodeji; Makinde, Olufunmbi Olukemi; Olaleye, Olalekan; Brown, Brandon; Odimegwu, Clifford O

2016-01-01

The practice of reproductive medicine in Nigeria is facing new challenges with the proliferation of 'baby factories'. Baby factories are buildings, hospitals or orphanages that have been converted into places for young girls and women to give birth to children for sale on the black market, often to infertile couples, or into trafficking rings. This practice illegally provides outcomes (children) similar to surrogacy. While surrogacy has not been well accepted in this environment, the proliferation of baby factories further threatens its acceptance. The involvement of medical and allied health workers in the operation of baby factories raises ethical concerns. The lack of a properly defined legal framework and code of practice for surrogacy makes it difficult to prosecute baby factory owners, especially when they are health workers claiming to be providing services to clients. In this environment, surrogacy and other assisted reproductive techniques urgently require regulation in order to define when ethico-legal lines have been crossed in providing surrogacy or surrogacy-like services. Copyright © 2015 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Thyroid endocrine system disruption by pentachlorophenol: an in vitro and in vivo assay.

Science.gov (United States)

Guo, Yongyong; Zhou, Bingsheng

2013-10-15

The present study aimed to evaluate the disruption caused to the thyroid endocrine system by pentachlorophenol (PCP) using in vitro and in vivo assays. In the in vitro assay, rat pituitary GH3 cells were exposed to 0, 0.1, 0.3, and 1.0 μM PCP. PCP exposure significantly downregulated basal and triiodothyronine (T3)-induced Dio 1 transcription, indicating the antagonistic activity of PCP in vitro. In the in vivo assay, zebrafish embryos were exposed to 0, 1, 3, and 10 μg/L of PCP until 14 days post-fertilization. PCP exposure resulted in decreased thyroxine (T4) levels, but elevated contents of whole-body T3. PCP exposure significantly upregulated the mRNA expression of genes along hypothalamic-pituitary-thyroid (HPT) axis, including those encoding thyroid-stimulating hormone, sodium/iodide symporter, thyroglobulin, Dio 1 and Dio 2, alpha and beta thyroid hormone receptor, and uridinediphosphate-glucuronosyl-transferase. PCP exposure did not influence the transcription of the transthyretin (TTR) gene. The results indicate that PCP potentially disrupts the thyroid endocrine system both in vitro and in vivo. Copyright © 2013 Elsevier B.V. All rights reserved.

Toxicity of pentachlorophenol to aquatic organisms under naturally varying and controlled environmental conditions

Energy Technology Data Exchange (ETDEWEB)

Hedtke, S.F.; West, C.W.; Allen, K.N.; Norberg-King, T.J.; Mount, D.I.

1986-06-01

The toxicity of pentachlorophenol (PCP) was determined in the laboratory for 11 aquatic species. Tests were conducted seasonally in ambient Mississippi River water and under controlled conditions in Lake Superior water. Fifty-one acute toxicity tests were conducted, with LC50 values ranging from 85 micrograms/L for the white sucker Catastomus commersoni during the summer to greater than 7770 micrograms/L for the isopod Asellus racovitzai during the winter. The effect of PCP on growth and/or reproduction was determined for seven species. The most sensitive chronically exposed organisms were the cladoceran Ceriodaphnia reticulata and the snail Physa gyrina. The greatest variation in toxicity was due to species sensitivity. Within a given, season there was as much as a 40-fold difference in LC50 values between species. For any one species, the maximum variation in LC50 between seasons was approximately 14-fold. There were also substantial differences in acute-chronic relationships, with acute/chronic ratios ranging from greater than 37 for C. reticulata to 1 for Simocephalus vetulus. It is suggested that the composition of the aquatic community should be the most important consideration in estimating the potential environmental effects of PCP.

Internet Factories

NARCIS (Netherlands)

Strijkers, R.J.

2014-01-01

This thesis contributes a novel concept for introducing new network technologies in network infrastructures. The concept, called Internet factories, describes the methodical process to create and manage application-specific networks from application programs, referred to as Netapps. An Internet

Internet factories

NARCIS (Netherlands)

Strijkers, R.J.

2014-01-01

This thesis contributes a novel concept for introducing new network technologies in network infrastructures. The concept, called Internet factories, describes the methodical process to create and manage application-specific networks from application programs, referred to as Netapps. An Internet

Baby Factory

African Journals Online (AJOL)

Prof

2018-01-24

Jan 24, 2018 ... mass media have the power to easily propagate ideas on social change ... issue of 'baby factory' is becoming everyday news affecting the right of ... according to recent mass media reports, teenage girls and young women are.

Circular Higgs Factories & Possible Long-Term Strategy

CERN Document Server

Zimmermann, F

2013-01-01

In 2012 two LHC experiments have discovered a new particle with a mass around 125 GeV, which appears to be the scalar Higgs boson of the Standard Model. To further examine this remarkable particle it could be produced in large numbers for precision studies by an e+e− collider operating near the ZH threshold at beam energies of 120 GeV, or, in the s-channel by a gamma-gamma collider with primary electron beam energies of 80 GeV, or by a high-energy electron-proton collider. In this talk I will discuss tentative design parameters, novel concepts and accelerator-physics challenges (1) for a high-luminosity lepton-hadron collider, bringing into collision a 60-GeV electron beam from an energy-recovery electron linac with one of the LHC hadron beams – LHeC –, (2) for a gamma-gamma Higgs-factory collider based on the reconfigured recirculating SC electron linac – SAPPHiRE – and (3) for a circular e+e− Higgs-factory collider in a new tunnel with a circumference of 80-100 km – TLEP. I will also discuss f...

Radiation safety design of super KEKB factory

International Nuclear Information System (INIS)

Sanami, Toshiya

2015-01-01

The SuperKEKB factory, which was scheduled to start operation early 2015, is an electron-positron collider designed to produce an 80x10"3"4-1/cm"2/s luminosity, which is 40 times greater than the KEKB factory. Built to investigate CP violation and 'new physics' beyond the Standard Model, the facility consists of a 7-GeV electron/3.5-GeV positron linac, a 1.1- GeV positron damping ring, beam transport, and a 7-GeV electron/4-GeV positron collider. To meet this level of luminosity, the collider will be operated with a small beam size and a large crossing angle at the interaction point. According to particle tracking simulations, beam losses under these conditions will be 35 times more than those previously operated. To help optimise shielding configurations, leakage radiation and induced activity are estimated through empirical equations and detailed Monte-Carlo simulations using MARS15 code for the interaction region, beam halo collimators, emergency pathways, ducts, forward direction tunnels, and positron production target. Examples of shielding strategies are presented to reduce both leakage dose and airborne activity for several locations in the facility. (authors)

Smart factory in the context of 4th industrial revolution: challenges and opportunities for Romania

Science.gov (United States)

Pîrvu, B. C.; Zamfirescu, C. B.

2017-08-01

Manufacturing companies, independent of operation sector and size, must be able to produce lot size one products, just-in-time at a competitive cost. Coping with this high adaptability and short reaction times proves to be very challenging. New approaches must be taken into consideration for designing modular, intelligent and cooperative production systems which are easy to integrate with the entire factory. The coined term for this network of intelligent interacting artefacts system is cyber-physical systems (CPS). CPS is often used in the context of Industry 4.0 - or what many consider the forth industrial revolution. The paper presents an overview of key technological and social requirements to map the Smart Factory vision into reality. Finally, global and Romanian specific challenges hindering the vision of a true Smart Factory to become reality are presented.

A small capacity co generative gas-turbine plant in factory AD 'Komuna' - Skopje (Macedonia)

International Nuclear Information System (INIS)

Dimitrov, Konstantin; Armenski, Slave; Tashevski, Done

2000-01-01

The factory AD 'Komuna' -Skopje (Macedonia), has two steam block boilers, type ST 800 for steam production for process and space heating. The factory satisfies the electricity needs from the national grid. By the use of natural gas like fuel it is possible to produce electrical energy in its own co generative gas turbine plant. In this article, a co generative plant with small-scale gas turbine for electricity production is analyzed . The gas from gas turbine have been introduce in the steam block boiler. Also, a natural gas consumption, the electricity production, total investment and payback period of investment are determined. (Authors)

Phi factories

International Nuclear Information System (INIS)

Anon.

1990-01-01

Plans for 'phi factories' gathered momentum with a recent workshop at UCLA. These machines, high luminosity electron-positron colliders working near the phi resonance at 1020 MeV, have been proposed at Laboratories in Europe, the US, Japan and the USSR

Smart Factory

DEFF Research Database (Denmark)

Bilberg, Arne; Radziwon, Agnieszka; Grube Hansen, David

2017-01-01

their innovation and competitive advantage by focusing at their competences, strengths and opportunities. The project suggests innovative solutions and business models through collaboration and use of new technologies. In the Smart Factory, SMEs should be able to collaborate on new products, markets and production......, and to target their challenges and ensure sustainable growth and business in these enterprises. Therefore the focus of the Smart Factory project was to support the growth and sustainable development of the small and medium sized manufacturing industry in Denmark. The project focused on SMEs and how to improve......A large part of Danish Industry is based on Small and Medium Sized Enterprises (SMEs), which account for –99% of the companies in Denmark and about two third of the job positions (source: statistikbanken.dk) . That is why, it is so important also to focus research and development at SMEs...

Analysis of scaled-factorial-moment data

International Nuclear Information System (INIS)

Seibert, D.

1990-01-01

We discuss the two standard constructions used in the search for intermittency, the exclusive and inclusive scaled factorial moments. We propose the use of a new scaled factorial moment that reduces to the exclusive moment in the appropriate limit and is free of undesirable multiplicity correlations that are contained in the inclusive moment. We show that there are some similarities among most of the models that have been proposed to explain factorial-moment data, and that these similarities can be used to increase the efficiency of testing these models. We begin by calculating factorial moments from a simple independent-cluster model that assumes only approximate boost invariance of the cluster rapidity distribution and an approximate relation among the moments of the cluster multiplicity distribution. We find two scaling laws that are essentially model independent. The first scaling law relates the moments to each other with a simple formula, indicating that the different factorial moments are not independent. The second scaling law relates samples with different rapidity densities. We find evidence for much larger clusters in heavy-ion data than in light-ion data, indicating possible spatial intermittency in the heavy-ion events

DESIGN AND LAYOUT CONCEPTS FOR COMPACT, FACTORY-PRODUCED, TRANSPORTABLE, GENERATION IV REACTOR SYSTEMS

Energy Technology Data Exchange (ETDEWEB)

Mynatt Fred R.; Townsend, L.W.; Williamson, Martin; Williams, Wesley; Miller, Laurence W.; Khan, M. Khurram; McConn, Joe; Kadak, Andrew C.; Berte, Marc V.; Sawhney, Rapinder; Fife, Jacob; Sedler, Todd L.; Conway, Larry E.; Felde, Dave K.

2003-11-12

The purpose of this research project is to develop compact (100 to 400 MWe) Generation IV nuclear power plant design and layout concepts that maximize the benefits of factory-based fabrication and optimal packaging, transportation and siting. The reactor concepts selected were compact designs under development in the 2000 to 2001 period. This interdisciplinary project was comprised of three university-led nuclear engineering teams identified by reactor coolant type (water, gas, and liquid metal) and a fourth Industrial Engineering team. The reactors included a Modular Pebble Bed helium-cooled concept being developed at MIT, the IRIS water-cooled concept being developed by a team led by Westinghouse Electric Company, and a Lead-Bismuth-cooled concept developed by UT. In addition to the design and layout concepts this report includes a section on heat exchanger manufacturing simulations and a section on construction and cost impacts of proposed modular designs.

DESIGN AND LAYOUT CONCEPTS FOR COMPACT, FACTORY-PRODUCED, TRANSPORTABLE, GENERATION IV REACTOR SYSTEMS

International Nuclear Information System (INIS)

Mynatt, Fred R.; Townsend, L.W.; Williamson, Martin; Williams, Wesley; Miller, Laurence W.; Khan, M. Khurram; McConn, Joe; Kadak, Andrew C.; Berte, Marc V.; Sawhney, Rapinder; Fife, Jacob; Sedler, Todd L.; Conway, Larry E.; Felde, Dave K.

2003-01-01

The purpose of this research project is to develop compact (100 to 400 MWe) Generation IV nuclear power plant design and layout concepts that maximize the benefits of factory-based fabrication and optimal packaging, transportation and siting. The reactor concepts selected were compact designs under development in the 2000 to 2001 period. This interdisciplinary project was comprised of three university-led nuclear engineering teams identified by reactor coolant type (water, gas, and liquid metal) and a fourth Industrial Engineering team. The reactors included a Modular Pebble Bed helium-cooled concept being developed at MIT, the IRIS water-cooled concept being developed by a team led by Westinghouse Electric Company, and a Lead-Bismuth-cooled concept developed by UT. In addition to the design and layout concepts this report includes a section on heat exchanger manufacturing simulations and a section on construction and cost impacts of proposed modular designs

Factorials of real negative and imaginary numbers - A new perspective.

Science.gov (United States)

Thukral, Ashwani K

2014-01-01

Presently, factorials of real negative numbers and imaginary numbers, except for zero and negative integers are interpolated using the Euler's gamma function. In the present paper, the concept of factorials has been generalised as applicable to real and imaginary numbers, and multifactorials. New functions based on Euler's factorial function have been proposed for the factorials of real negative and imaginary numbers. As per the present concept, the factorials of real negative numbers, are complex numbers. The factorials of real negative integers have their imaginary part equal to zero, thus are real numbers. Similarly, the factorials of imaginary numbers are complex numbers. The moduli of the complex factorials of real negative numbers, and imaginary numbers are equal to their respective real positive number factorials. Fractional factorials and multifactorials have been defined in a new perspective. The proposed concept has also been extended to Euler's gamma function for real negative numbers and imaginary numbers, and beta function.

Synchrotron radiation leakage from the B-factory beam pipe

International Nuclear Information System (INIS)

Jenkins, T.M.; Nelson, W.R.; Ipe, N.

1990-01-01

The high-energy ring (HER) of the B-Factory, running at an energy of 9 GeV, generates the synchrotron spectrum when applied to a ring with the PEP bending radius. The B-Factory HER may also run at 12 GeV, producing the harder spectrum. Depending upon beam-pipe material and thickness, some of this radiation may escape and deposit energy in the surrounding material. This was originally pointed out in PEP-109 during the initial design of PEP, and subsequently verified by measurements at both PEP and PETRA at DESY. Of concern to the B Factory is magnet insulation, though other adjacent materials such as wire insulation and cooling water hoses are even more radiosensitive. Radiation damage to magnets is a function of the type of material used in the potting compound. The PEP magnets, which hopefully can be used for the high-energy ring of the B-Factory, are insulated with an epoxy composed of DER-332, DER-732, NMA and aluminum oxide. It is estimated that this epoxy compound should tolerate doses near the 10 10 rad range. To summarize the results of these calculations, 0.87 cm of copper is needed at the point of maximum dose from 12-GeV operation in order to reach the dose criterion if a rectangular beam pipe is used. The copper needs to be only 0.7-cm thick for an octagonal beam pipe and the same energy. For 9-GeV operation, an octagonal copper pipe needs only to be 0.25-cm thick. An octagonal aluminum pipe that is 0.5-cm thick also needs 0.3 cm of lead on the outside to reach the same criterion for 12-GeV operation. For 9-GeV operation, the aluminum pipe still requires a lead liner

The Tau-Charm Factory in the ERA of B-Factories and CESR

International Nuclear Information System (INIS)

Beers, L.V.; Perl, M.L.

1994-10-01

This paper is a collection of presentations made at a conference on tau-charm factories, held at the Stanford Linear Accelerator Center and Stanford University on August 15-16, 1994. The papers presented summarize the physics which can be learned from such a facility, the advantages it would present over planned B-factories and large centers such as CESR, and the types of decay modes which could be observed. More detailed studies of tau physics are opened up, as well as charmonium and charmed systems. Seperate presentations to the proceedings are indexed individually into the database

Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

Science.gov (United States)

Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

2017-07-19

Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

The Low-Energy Neutrino Factory

International Nuclear Information System (INIS)

Brass, Alan; Geer, Steve; Ellis, Malcolm; Mena, Olga; Pascoli, Silvia

2008-01-01

To date most studies of Neutrino Factories have focused on facilities where the energy of the muon in the storage ring has been in the range of 25-50 GeV. In this paper we present a concept for a Low-Energy (∼ 4 GeV) neutrino factory. For baselines of O(1000 km), the rich oscillation pattern at low neutrino interaction energy (0.5 - ∼3 GeV) provides the unique performance of this facility with regard to its sensitivity to CP violation and the determination of the neutrino mass hierarchy. A unique neutrino detector is needed, however, in order to exploit this oscillation pattern. We will describe the basic accelerator facility, demonstrate the methodology of the analysis and give an estimate on how well the Low-Energy neutrino factory can measure θ 13 , CP violation and the mass hierarchy. We will also describe the detector concept that is used, show a preliminary analysis regarding its performance and indicate what R and D is still needed. Finally we will show how the Low-Energy neutrino factory could be a step towards an energy frontier muon collider.

The Energy Factory; EnergieFabriek

Energy Technology Data Exchange (ETDEWEB)

Van den Boomen, M.; Van den Dungen, G.J.; Elias, T.; Jansen, M. [Universiteit van Amsterdam UvA, Amsterdam (Netherlands)

2009-05-15

The Energy Factory is a collaboration of 26 Dutch local water boards in which options for energy saving and energy production are examined. According to the authors, the initiative of the Energy Factory will lead to a reframing of the role of the water boards. Moreover, they explain how the PPP concept (People, Planet, Profit) may act as platform for negotiations between actors who are involved in the Energy Factory. In addition, the PPP concept is used to demonstrate that the Energy Factory will lead to larger social involvement, social entrepreneurship and growing profits [Dutch] De Energiefabriek is een samenwerkingsverband van 26 waterschappen in Nederland waarin wordt gezocht naar mogelijkheden om energie te besparen en zelf energie te produceren. Volgens de auteurs van deze notitie leidt het initiatief van de Energiefabriek tot een reframing van de rol van waterschappen. Daarnaast leggen ze uit hoe het PPP-concept (People, Profit, Planet) kan fungeren als platform voor onderhandelingen tussen de actoren die betrokken zijn bij de Energiefabriek. Verder wordt met het PPP-concept aangetoond dat de Energiefabriek leidt tot ruimere maatschappelijke betrokkenheid, maatschappelijk ondernemen en winstvergroting.

Information Management for Factory Planning and Design

OpenAIRE

Chen, Danfang

2012-01-01

This thesis is dedicated to the manufacturing industry for the improvement of information management within the factory planningand design domain, and for more efficient factory planning and design. Currently the manufacturing industry lacks sufficient methods for capturing, structuring, and representing information and knowledge for easy access, exchange, integration and reuse within the domain. Therefore the focus of this thesis is on information and knowledge management within factory plan...

Virtual Factory Testbed

Data.gov (United States)

Federal Laboratory Consortium — The Virtual Factory Testbed (VFT) is comprised of three physical facilities linked by a standalone network (VFNet). The three facilities are the Smart and Wireless...

Photon factory activity report, 1993

International Nuclear Information System (INIS)

1994-01-01

This issue is the annual report of the Photon Factory, National Laboratory of High Energy Physics. First the outline of the Photon Factory is presented. Injector linac, light source, beamlines and instrumentation, synchrotron radiation facility at the Tristan accumulation ring, and the Tristan super light facility are described in detail. The facility is open to researchers. The user's reports are collected as well. (J.P.N.)

General B factory design considerations

International Nuclear Information System (INIS)

Zisman, M.S.

1992-12-01

We describe the general considerations that go into the design of an asymmetric B factory collider. Justification is given for the typical parameters of such a facility, and the physics and technology challenges that arise from these parameter choices are discussed. Cost and schedule issues for a B factory are discussed briefly. A summary of existing proposals is presented, noting their similarities and differences

Photon Factory Activity Report, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

Photon Factory Activity Report no.12 deals with our activities in the period from October 1993 through September 1994. We operate two light sources at the Photon Factory; the 2.5-GeV Photon Factory storage ring, which is a dedicated light source, and the 6.5-GeV TRISTAN Accumulation Ring, which is parasitically used as a light source. We keep more than seventy experimental stations at two facilities, and accept experiments primarily according to approval by the Program Advisory Committee. The number of proposals to the Photon Factory has been still growing. Three-hundred eighty two proposals were approved by the PAC in FY1994, which is an increase by thirteen percent compared to the previous year. Remarkable was growth in biology proposals, particularly proposals in protein crystallography. In FY 1994, we accepted approximately 20,000 man-days as general users, and almost ten percent of them were from abroad. We always open the facility to users, not only domestic but also international. Recently we have been concentrating our effort to upgrading of the light sources and reconstruction of the experimental stations to keep the Photon Factory an attractive research facility in the forthcoming years. We have already started a program of reducing the emittance of the 2.5-GeV storage ring, which now operates with an emittance of 110 nm-rad, to 27 nm-rad by modifying the lattice, with the goal of operation at the reduced emittance in the fall of 1997. We also have conceived of a conversion of the TRISTAN Accumulation Ring to a dedicated light source of high energies. The on-going TRISTAN project will terminate by the end of 1995, and the TRISTAN Main Ring will be converted to a new B-Factory. At this moment, the TRISTAN Accumulation Ring will be disused as the injector to the Main Ring, and conversion of the AR to a dedicated light source becomes possible. (J.P.N.)

Photon Factory Activity Report, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Photon Factory Activity Report no.12 deals with our activities in the period from October 1993 through September 1994. We operate two light sources at the Photon Factory; the 2.5-GeV Photon Factory storage ring, which is a dedicated light source, and the 6.5-GeV TRISTAN Accumulation Ring, which is parasitically used as a light source. We keep more than seventy experimental stations at two facilities, and accept experiments primarily according to approval by the Program Advisory Committee. The number of proposals to the Photon Factory has been still growing. Three-hundred eighty two proposals were approved by the PAC in FY1994, which is an increase by thirteen percent compared to the previous year. Remarkable was growth in biology proposals, particularly proposals in protein crystallography. In FY 1994, we accepted approximately 20,000 man-days as general users, and almost ten percent of them were from abroad. We always open the facility to users, not only domestic but also international. Recently we have been concentrating our effort to upgrading of the light sources and reconstruction of the experimental stations to keep the Photon Factory an attractive research facility in the forthcoming years. We have already started a program of reducing the emittance of the 2.5-GeV storage ring, which now operates with an emittance of 110 nm-rad, to 27 nm-rad by modifying the lattice, with the goal of operation at the reduced emittance in the fall of 1997. We also have conceived of a conversion of the TRISTAN Accumulation Ring to a dedicated light source of high energies. The on-going TRISTAN project will terminate by the end of 1995, and the TRISTAN Main Ring will be converted to a new B-Factory. At this moment, the TRISTAN Accumulation Ring will be disused as the injector to the Main Ring, and conversion of the AR to a dedicated light source becomes possible. (J.P.N.)

Photon Factory Activity Report, 1994

International Nuclear Information System (INIS)

1995-01-01

Photon Factory Activity Report no.12 deals with our activities in the period from October 1993 through September 1994. We operate two light sources at the Photon Factory; the 2.5-GeV Photon Factory storage ring, which is a dedicated light source, and the 6.5-GeV TRISTAN Accumulation Ring, which is parasitically used as a light source. We keep more than seventy experimental stations at two facilities, and accept experiments primarily according to approval by the Program Advisory Committee. The number of proposals to the Photon Factory has been still growing. Three-hundred eighty two proposals were approved by the PAC in FY1994, which is an increase by thirteen percent compared to the previous year. Remarkable was growth in biology proposals, particularly proposals in protein crystallography. In FY 1994, we accepted approximately 20,000 man-days as general users, and almost ten percent of them were from abroad. We always open the facility to users, not only domestic but also international. Recently we have been concentrating our effort to upgrading of the light sources and reconstruction of the experimental stations to keep the Photon Factory an attractive research facility in the forthcoming years. We have already started a program of reducing the emittance of the 2.5-GeV storage ring, which now operates with an emittance of 110 nm-rad, to 27 nm-rad by modifying the lattice, with the goal of operation at the reduced emittance in the fall of 1997. We also have conceived of a conversion of the TRISTAN Accumulation Ring to a dedicated light source of high energies. The on-going TRISTAN project will terminate by the end of 1995, and the TRISTAN Main Ring will be converted to a new B-Factory. At this moment, the TRISTAN Accumulation Ring will be disused as the injector to the Main Ring, and conversion of the AR to a dedicated light source becomes possible. (J.P.N.)

STANFORD (SLAC): B factory construction begins

Energy Technology Data Exchange (ETDEWEB)

Anon.

1994-03-15

At a ceremony marking the start of construction, members of the US Congress and Secretary of Energy Hazel O'Leary hailed the new Asymmetric B Factory as the key to continued vitality of the Stanford Linear Accelerator Center (SLAC). Being built in collaboration with the Lawrence Berkeley Laboratory and the Lawrence Livermore National Laboratory, the B factory is a $177 million upgrade of the existing PEP electron-positron collider. Scheduled for completion in 1998, the B factory will generate many millions of B mesons, allowing, among other physics, an intensive search for the phenomena of CP violation in the decays of these particles.

Deficits and Solutions in the Development of Modular Factory Systems

OpenAIRE

Achim Kampker; Peter Burggräf; Moritz Krunke; Hanno Voet

2017-01-01

As a reaction to current challenges in factory planning, many companies think about introducing factory standards to lower planning times and decrease planning costs. If these factory standards are set-up with a high level of modularity, they are defined as modular factory systems. This paper deals with the main current problems in the application of modular factory systems in practice and presents a solution approach with its basic models. The methodology is based on methods from factory pla...

Análise factorial confirmatória do TEOSQp Confirmatory factorial analysis of TEOSQp

Directory of Open Access Journals (Sweden)

Helder M. Fernandes

2010-04-01

Full Text Available O propósito do presente estudo foi avaliar a confiabilidade, a validade factorial e a invariância (por sexo da versão portuguesa do TEOSQ (Fonseca & Biddle, 2001. Integraram a amostra 1010 estudantes com uma média de idade de 15,42 anos. A análise factorial e da invariância foi avaliada através da análise factorial confirmatória. Os resultados corroboram a proposta de uma estrutura de duas subescalas (tarefa e ego. Com base nos índices de modificação e justificação teórica, o TEOSQ p foi reduzido a 12-itens, com melhores índices de adequação para o modelo oblíquo. Os resultados relativos à invariância por sexo não apresentaram apoio empírico total para a assumpção de equivalência multi-grupo, sugerindo que o TEOSQ p não parece avaliar as orientações cognitivas do mesmo modo, para os indivíduos do sexo masculino (modelo ortogonal e feminino (modelo oblíquo. Face aos resultados obtidos, foram discutidas as implicações conceptuais, empíricas, assim como os aspectos de carácter aplicado.The present research assessed the reliability, factorial validity and measurement invariance (by gender of the Portuguese version of TEOSQ -Task and Ego Orientation in Sport Questionnaire (Fonseca & Biddle, 2001. Data were collected from 1010 physical education students with a mean age of 15.42 ( SD=1.91. Factorial and invariance measurements were tested via confirmatory factorial analysis. Results supported internal consistency for the two proposed subscales (task and ego. Based on modification indices and theoretical justification the TEOSQ p was reduced to 12 items with better goodness-of-fit indices for the oblique model. The results of gender invariance did not provide full empirical support to the multi-group equivalence assumption, being suggested that TEOSQ p does not measure in the same way goal orientations for boys (orthogonal model and girls (oblique model. In light of these results, conceptual, empirical and practical

Confirmatory factorial analysis of TEOSQp / Análise factorial confirmatória do TEOSQp

Directory of Open Access Journals (Sweden)

Helder M. Fernandes

2010-01-01

Full Text Available The present research assessed the reliability, factorial validity and measurement invariance (by gender of the Portuguese version of TEOSQ –Task and Ego Orientation in Sport Questionnaire (Fonseca & Biddle, 2001. Data were collected from 1010 physical education students with a mean age of 15.42 ( SD=1.91. Factorial and invariance measurements were tested via confirmatory factorial analysis. Results supported internal consistency for the two proposed subscales (task and ego. Based on modification indices and theoretical justification the TEOSQ p was reduced to 12 items with better goodness-of-fit indices for the oblique model. The results of gender invariance did not provide full empirical support to the multi-group equivalence assumption, being suggested that TEOSQ p does not measure in the same way goal orientations for boys (orthogonal model and girls (oblique model. In light of these results, conceptual, empirical and practical issues were discussed.

Photon factory activity report, 1992

International Nuclear Information System (INIS)

1993-01-01

This issue is the annual report of the Photon Factory, National laboratory of High Energy Physics. First, the outline of the Photon Factory is presented. Injector linac, light source, beamlines and instrumentation, the Tristan synchrotron radiation facility at the accumulation ring, and the Tristan super light facility are described in detail. The facility is open to researchers. The user's reports are collected as well. (J.P.N.) (435 refs.)

Metabolic fate of [U-14C]pentachlorophenol in a lactating dairy cow

International Nuclear Information System (INIS)

Kinzell, J.H.; McKenzie, R.M.; Olson, B.A.; Kirsch, D.G.; Shull, L.R.

1985-01-01

A lactating Holstein-Friesen dairy cow was administered a single oral dose of [U- 14 C]pentachlorophenol (PCP). To better simulate chronic exposure conditions on a typical dairy farm, the cow was fed 0.2 mg/kg body wt/day technical PCP for 95 days prior to [U- 14 C]PCP administration and for the 4 days postadministration. Both absorption and elimination of PCP obeyed first-order kinetics and had half-lives of 4.3 and 43 h, respectively. Over the 76-h postadministration, 75% of the radiolabel was eliminated in urine, 5% in milk, and 5% in feces. The radiolabel was distributed widely into various tissues, but the highest levels were in liver, kidneys, and lungs. Skeletal muscle and adipose tissue contained among the lowest levels. In milk, the fat fraction contained the greatest amount of the radiolabel but the whey fraction represented the largest pool (62.2%). In whey and casein, both conjugated and unconjugated forms were quantified. There was no evidence of phase 1 metabolism of PCP, whereas phase 2 metabolism (conjugation) was highly evident. In urine, two-thirds of the PCP was present in a conjugated form, whereas in serum about 80% was present as unconjugated PCP. These data suggest that efficient conjugation and elimination of PCP prevent its accumulation in cattle tissues

Biochar based remediation of water and soil contaminated by phenanthrene and pentachlorophenol.

Science.gov (United States)

Rao, Maria A; Di Rauso Simeone, Giuseppe; Scelza, Rosalia; Conte, Pellegrino

2017-11-01

Phenanthrene (Phe) and pentachlorophenol (PCP) are classified as persistent organic pollutants and represent serious concern for the environment as they are toxic and ubiquitous. Biochar based remediation is an emerging technology used in water and soil contamination. In this study we used poplar (BP) and conifer (BC) biochars to remediate water and soil contaminated by Phe and PCP. BP and BC were able to remove completely either Phe or PCP from contaminated water within one to three days. When biochar was confined in a porous membrane, BC and BP maintained their sorption efficiency for several remediation cycles. However, in these conditions BC allowed faster Phe removal. In soil remediation experiments, addition of two biochar rates, i.e. 2.5 and 5 mg g -1 , strongly reduced Phe extractability (up to 2.7% of the initially added Phe with the larger BC dose). This was similar to the behavior observed when compost was applied in order to verify the role of soil organic matter in the fate of both contaminants. PCP extractability was reduced only up to 75% (in average) in all samples including those with compost amendment. Only larger amount of biochar (20 and 50 mg g -1 ) allowed reduction of the extractable PCP and nullified phytotoxicity of the contaminant. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biodegradation and ecotoxicity of soil contaminated by pentachlorophenol applying bioaugmentation and addition of sorbents

Energy Technology Data Exchange (ETDEWEB)

Zuzana, S.; Katarina, D.; Livia, T. [Slovak Technical University Bratislava, Bratislava (Slovakia). Dept. of Biochemical Technology

2009-02-15

Biodegradation of pentachlorophenol (PCP) in soil by autochthonous microorganisms and in soil bioaugmented by the bacterial strain Comamonas testosteroni CCM 7530 was studied. Subsequent addition of organomineral complex (OMC) or lignite as possible sorbents for PCP immobilization has been investigated as well. The OMC was prepared from humic acids (HAs) isolated from lignite by binding them onto zeolite. Biodegradation of PCP and number of colony forming units (CFUs) were determined in the three types of soil, Chernozem, Fluvisol, and Regosol, freshly spiked with PCP and amended separately with tested sorbents. The enhancing effect of sorbent addition and bioaugmentation on PCP biodegradation depended mainly on the soil type and the initial PCP concentration. Microbial activity resulted in biotransformation of PCP into certain toxic substances, probably lower chlorinated phenols that are more soluble than PCP, and therefore more toxic to present biota. Therefore, it was necessary to monitor soil ecotoxicity during biodegradation. Addition of the OMC resulted in a more significant decrease of soil toxicity in comparison with addition of lignite. Lignite and OMC appear to be good traps for PCP with potential application in remediation technology.

The developmental effects of pentachlorophenol on zebrafish embryos during segmentation: A systematic view

Science.gov (United States)

Xu, Ting; Zhao, Jing; Xu, Zhifa; Pan, Ruijie; Yin, Daqiang

2016-05-01

Pentachlorophenol (PCP) is a typical toxicant and prevailing pollutant whose toxicity has been broadly investigated. However, previous studies did not specifically investigate the underlying mechanisms of its developmental toxicity. Here, we chose zebrafish embryos as the model, exposed them to 2 different concentrations of PCP, and sequenced their entire transcriptomes at 10 and 24 hours post-fertilization (hpf). The sequencing analysis revealed that high concentrations of PCP elicited systematic responses at both time points. By combining the enrichment terms with single genes, the results were further analyzed using three categories: metabolism, transporters, and organogenesis. Hyperactive glycolysis was the most outstanding feature of the transcriptome at 10 hpf. The entire system seemed to be hypoxic, although hypoxia-inducible factor-1α (HIF1α) may have been suppressed by the upregulation of prolyl hydroxylase domain enzymes (PHDs). At 24 hpf, PCP primarily affected somitogenesis and lens formation probably resulting from the disruption of embryonic body plan at earlier stages. The proposed underlying toxicological mechanism of PCP was based on the crosstalk between each clue. Our study attempted to describe the developmental toxicity of environmental pollutants from a systematic view. Meanwhile, some features of gene expression profiling could serve as markers of human health or ecological risk.

STANFORD (SLAC): B factory construction begins

International Nuclear Information System (INIS)

Anon.

1994-01-01

At a ceremony marking the start of construction, members of the US Congress and Secretary of Energy Hazel O'Leary hailed the new Asymmetric B Factory as the key to continued vitality of the Stanford Linear Accelerator Center (SLAC). Being built in collaboration with the Lawrence Berkeley Laboratory and the Lawrence Livermore National Laboratory, the B factory is a $177 million upgrade of the existing PEP electron-positron collider. Scheduled for completion in 1998, the B factory will generate many millions of B mesons, allowing, among other physics, an intensive search for the phenomena of CP violation in the decays of these particles

Engineering the Polyketide Cell Factory

DEFF Research Database (Denmark)

Mølgaard, Louise

sufficient titers. To improve the production of polyketides biological engineering principles have been applied for the development and engineering of microbial polyketide cell factories. The two biological hosts used for heterologous polyketide production were Aspergillus nidulans and Saccharomyces...... phosphopantetheinylase (PPTase). This versatile vector system can easily be used for expression of other polyketides of interest as well as extended to express whole gene clusters. After achieving proof of principle in terms of expression, the polyketide cell factory must be optimized. The optimization can be achieved...... characterization in bioreactors revealed that the yields of 6-MSA on biomass increased albeit not significantly. As a result of this it may be argued that there is still more work to be done in terms of model building in A. nidulans. Utilizing another well-established cell factory S. cerevisiae the capabilities...

Photon Factory activity report, 1991

International Nuclear Information System (INIS)

1992-01-01

The Photon Factory is a national synchrotron radiation research facility affiliated with the National Laboratory for High Energy Physics located in Tsukuba Science City. The Photon Factory consists of a 2.5 GeV electron/positron linear accelerator, a 2.5 GeV electron/positron storage ring, beam lines and experimental stations. All the facilities for synchrotron radiation research are open to scientists. A part of the accumulation ring of the TRISTAN main ring has been used as a synchrotron radiation source in the energy range from 5.8 to 6.5 GeV. The Photon Factory is composed of three divisions of Injector Linac, Light Source and Instrumentation. The researches of each divisions are reviewed, and the users' short reports are collected. The list of published papers with author index is also included in the publication. (K.I.) 233 refs

Survivor shielding. Part A. Nagasaki factory worker shielding

International Nuclear Information System (INIS)

Santoro, Robert T.; Barnes, John M.; Azmy, Yousry Y.; Kerr, George D.; Egbert, Stephen D.; Cullings, Harry M.

2005-01-01

Recent investigations based on conventional chromosome aberration data by the RERF suggest that the DS86 doses received by many Nagasaki factory workers may have been overestimated by as much as 40% relative to those for other survivors in Japanese-type houses and other shielding configurations (Kodama et al. 2001). Since the factory workers represent about 25% of the Nagasaki survivors with DS86 doses in excess of 0.5 Gy (50 rad), systematic errors in their dose estimates can have a major impact on the risk coefficients from RERF studies. The factory worker doses may have been overestimated for a number of reasons. The calculation techniques, including the factory building modeling, weapon source spectra and cross-section data used in the DS86 shielding calculations were not detailed enough to replicate actual conditions. The models used did not take into account local shielding provided by machinery, tools, and the internal structure in the buildings. In addition, changes in the disposition of shielding following collapse of the building by the blast wave were not considered. The location of large factory complexes may be uncertain, causing large numbers of factory survivors, correctly located relative to each other, to be uniformly too close to the hypocenter. Any or all of these reasons are sufficient to result in an overestimate of the factory worker doses. During the DS02 studies, factory worker doses have been reassessed by more carefully modeling the factory buildings, incorporating improved radiation transport methods and cross-section data and using the most recent bomb leakage spectra (Chapter 2). Two-dimensional discrete ordinates calculations were carried out initially to estimate the effects of workbenches and tools on worker doses to determine if the inclusion of these components would, in fact, reduce the dose by amounts consistent with the RERF observations (Kodama et al. 2001). (author)

INDOOR THERMAL CONDITION OF FACTORY BUILDING IN BANGLADESH

Directory of Open Access Journals (Sweden)

Muhammed Abdullah Al Sayem Khan

2011-12-01

Full Text Available Bangladesh is a developing country and has a lot of factories for different products for local use and also export to abroad. Garments industries are one of the top most items of exported items. A huge number of populations are working in garments industries. But these factories are not well designed in sense of the thermal environment. Workers experiences sickness related to indoor environment. The productions of these factories are affected due to employees’ health condition. The research is done in two different methods. One is empirical data collection using thermal data loggers and the other is questionnaire survey on the spots for three factory buildings. The field study was conducted in four different months of the same year during winter and summer period. Expected findings of this research are that the indoor environment is not comfortable for works at day time during summer season. This research will help the factory workers in providing a comfortable thermal environment and also help the employers or factory owners to increase their production margin.

Atomic Energy (factories) rules: 1988

International Nuclear Information System (INIS)

1988-01-01

These rules are made by the Central Government under the Factories Act, 1948 and extend to all factories engaged in carrying out the purposes of the Atomic Energy Act, 1962. The rules cover the requirements of inspecting staff, health aspects, personnel safety, personnel welfare, working hours, employment of young persons, special provisions in case of dangerous manufacturing processes or operations, supplemental rules for administrative aspects and special powers of competent authority. (M.G.B.)

The KAON Factory at TRIUMF

International Nuclear Information System (INIS)

Craddock, M.K.

1992-08-01

The TRIUMF KAON Factory is designed to produce beams of kaons, antiprotons, other hadrons and neutrinos 100 times more intense, or cleaner, than are available now, for a broad range of particle and nuclear physics experiments. This will require a 100 μA beam of 30 GeV protons, to be produced by an interleaved sequence of two fast-cycling synchrotrons and three storage rings, with the existing TRIUMF H - cyclotron as injector. An $11-million preconstruction study has enabled the overall design to be reviewed and prototypes of various components to be built and evaluated -fast-cycling dipole and quadrupole magnets, a dual-frequency magnet power supply, ceramic beam pipes with internal rf shields, and rf cavity (using perpendicular bias), an extraction kicker, and rf beam chopper, and production targets. Environmental, industrial and economic impact studies have also been completed and the cost estimates and schedule updated. The total cost of $708 million (Canadian) will be shared equally between Canada, British Columbia and international contributors: the first two-thirds of this sum have already been approved and negotiations for the remainder are under way. 25 refs., 7 figs

The KAON factory at TRIUMF

International Nuclear Information System (INIS)

Craddock, M.K.

1992-07-01

The TRIUMF KAON Factory is designed to produce beams of kaons, antiprotons, other hadrons and neutrinos 100 times more intense, or cleaner, than are available now, for a broad range of particle and nuclear physics experiments. This will require a 100 μA beam of 30 GeV protons, to be produced by an interleaved sequence of two fast-cycling synchrotrons and three storage rings, with the existing TRIUMF H - cyclotron as injector. An $11-million pre-construction study has enabled the overall design to be reviewed and prototypes of various components to be built and evaluated: fast-cycling dipole and quadrupole magnets, a dual frequency magnet power supply, ceramic beam pipes with internal rf shields, an rf cavity (using perpendicular bias), an extraction kicker, an rf beam chopper, and production targets. Environmental, industrial and economic impact studies have also been completed and the cost estimates and schedule updated. The total cost of $708 million (Canadian) will be shared equally between Canada, British Columbia and international contributors; the first two-thirds of this sum have already been approved and negotiations for the remainder are under way. 26 refs., 6 figs

Flow-based approach for holistic factory engineering and design

OpenAIRE

Constantinescu, C.; Westkämper, E.

2010-01-01

The engineering of future factories requires digital tools along life cycle phases from investment planning to ramp-up. Manufacturers need scientific-based integrated highly dynamic data management systems for the participative and integrated factory planning. The paper presents a new approach for the continuously integrated product design, factory and process planning, through a service-oriented architecture for the implementation of digital factory tools. A first prototype of the digital fa...

CrossRef Neutrino factory proton driver and target design

CERN Document Server

Garoby, Roland; Thomason, John; Davenne, Tristan; Caretta, Ottone; Back, John J

2016-01-01

Neutrinos are very elusive particles belonging to the lepton family. They exist in different types corresponding to the different charged leptons, namely electrons, muons and taus. Contrary to electrons, neutrinos hardly interact with matter which makes them very difficult to detect and study. To the best of today’s knowledge, neutrinos have hardly any mass and they can change from one type to another (so-called “neutrino oscillation”). Most physicists think that this oscillation occurs because neutrinos have mass. A Neutrino Factory [1] is a special facility producing a large amount of neutrinos every year (typically 10$^{21}$ neutrinos/year). Its main purpose is to study the change of type of neutrinos between the place where they are generated and a remote location. In a Neutrino Factory, neutrinos result from the decay of muons, unstable particles with a mean lifetime of 2.2 $\\mu$s in their rest frame. Sharp beams of high energy neutrinos are obtained at the end of the long straight sections of a mu...

Pentachlorophenol from an old henhouse as a dioxin source in eggs and related human exposure

International Nuclear Information System (INIS)

Piskorska-Pliszczynska, Jadwiga; Strucinski, Pawel; Mikolajczyk, Szczepan; Maszewski, Sebastian; Rachubik, Jaroslaw; Pajurek, Marek

2016-01-01

High levels of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were detected in free-range eggs, and these levels reached a concentration of 29.84 ± 7.45 pg of WHO-TEQ/g of fat. This value exceeded the EU maximum permitted level of 2.5 pg of WHO-TEQ/g of fat for PCDD/F congeners by twelve-fold. A chemical analysis (HRGC-HRMS) revealed elevated amounts of OCDD, OCDF, HxCDD, HpCDD and HpCDF. During the investigation, samples of feed, soil, wall scrapings, wooden ceiling of the henhouse and tissues from laying hens were examined for dioxin contents (30 samples altogether). The long and complicated investigation found that the source of dioxins in the poultry farm was pentachlorophenol-treated wood, which was used as structural components in the 40-year-old farm building adapted to a henhouse. The wooden building material contained PCDD/Fs at a concentration of 3922.60 ± 560.93 pg of WHO-TEQ/g and 11.0 ± 2.8 μg/kg of PCP. The potential risk associated with dioxin intake was characterized by comparing the theoretically calculated weekly and monthly intakes with the toxicological reference values (TRVs), namely the Tolerable Weekly Intake (TWI) and Provisional Tolerable Monthly Intake (PTMI) values of 14 pg of WHO-TEQ/kg of bw and 70 pg of WHO-TEQ/kg of bw, respectively. The intake of dioxins estimated for high egg consumers (approximately 5–6 eggs/week) exceeded the TWI and PTMI values, which may pose a risk of delayed adverse health effects. The estimated dose of PCDD/Fs and DL-PCBs for children consuming 5 eggs per week exceeded the TWI by as much as 450% because of their nearly 5-fold-lower body weight. Although the dioxin intake estimated for the average consumption of eggs in the general population did not exceed any of the TRVs applied (58.7% TWI and 51.1% PTMI), such a situation should be considered unacceptable from a public health perspective because eggs are not the only source of these contaminants

Survey and alignment of photon factory storage ring at KEK

International Nuclear Information System (INIS)

Araki, A.; Honjo, I.; Katoh, M.; Kamiya, Y.; Kihara, M.

1987-01-01

The heights of the magnets for both the ring and the beam transport line (BT-line) have been periodically measured at the Photon Factory. The accumulated data showed that the ring was considerably declined due to the construction of the large experimental hall and the tunnel of the TRISTAN project, and that the BT-line also sank several centimeters at some locations. These displacements of the magnets produce a significantly large closed orbit distortion and the vertical dispersion

Long-term pulmonary complications of chemical weapons exposure in former poison gas factory workers.

Science.gov (United States)

Nishimura, Yoshifumi; Iwamoto, Hiroshi; Ishikawa, Nobuhisa; Hattori, Noboru; Horimasu, Yasushi; Ohshimo, Shinichiro; Fujitaka, Kazunori; Kondo, Keiichi; Hamada, Hironobu; Awai, Kazuo; Kohno, Nobuoki

2016-07-01

Sulfur mustard (SM) and lewisite are vesicant chemical warfare agents that can cause skin blistering and chronic lung complications. During 1929-1945, a Japanese factory produced poisonous gases, which included SM, lewisite and other chemical weapons. The aim of this study was to investigate the chest computed tomography (CT) findings among long-term survivors who worked at this factory. During 2009-2012, we evaluated chest CT findings from 346 long-term survivors who worked at the poison gas factory. Skin lesions were used as an indicator of significant exposure to vesicant agents. Among the 346 individuals, 53 (15%) individuals experienced skin lesions while working at the factory, and chest CT revealed abnormal findings in 179 individuals (52%). Emphysema was the most common CT finding and was observed in 75 individuals (22%), while honeycombing was observed in 8 individuals (2%). Emphysema and honeycombing were more prevalent among individuals with skin lesions, compared to individuals without skin lesions. Multivariate analyses revealed significant associations between the presence of emphysema and skin lesions (p = 0.008). Among individuals who never smoked, individuals with skin lesions (n = 26) exhibited a significantly higher rate of emphysema, compared to individuals without skin lesions (n = 200) (35% versus 7%, respectively; p chemical warfare agents.

Evaluation of the potential of pentachlorophenol degradation in soil by pulsed corona discharge plasma from soil characteristics.

Science.gov (United States)

Wang, Tie Cheng; Lu, Na; Li, Jie; Wu, Yan

2010-04-15

Chlorinated organics are frequently found as harmful soil contaminants and persisted for extended periods of time. A novel approach, named pulsed corona discharge plasma (PCDP), was employed for the degradation of pentachlorophenol (PCP) in soil. Experimental results showed that 87% of PCP could be smoothly removed in 60 min. Increasing pulse voltage, enhancing soil pH, lowering humic acid (HA) in soil and reducing granular size of the soil were found to be favorable for PCP degradation efficiency. Oxidation and physical processes simultaneously contributed to PCP removal in soil and ozone was the main factor in PCDP treatment. C-Cl bonds in PCP were cleaved during PCDP treatment by Fourier transform infrared spectroscopy (FTIR) analysis. The mineralization of PCP was confirmed by total organic carbon (TOC) and dechlorination analyses. The main intermediate products such as tetrachlorocatechol, tetrachlorohydroquinone, acetic acid, formic acid, and oxalic acid were identified by HPLC/MS and ion chromatography. A possible pathway of PCP degradation in soil in such a system was proposed.

Math for the digital factory

CERN Document Server

Hömberg, Dietmar; Landry, Chantal

2017-01-01

This volume provides a unique collection of mathematical tools and industrial case studies in digital manufacturing. It addresses various topics, ranging from models of single production technologies, production lines, logistics and workflows to models and optimization strategies for energy consumption in production. The digital factory represents a network of digital models and simulation and 3D visualization methods for the holistic planning, realization, control and ongoing improvement of all factory processes related to a specific product. In the past ten years, all industrialized countries have launched initiatives to realize this vision, sometimes also referred to as Industry 4.0 (in Europe) or Smart Manufacturing (in the United States). Its main goals are • reconfigurable, adaptive and evolving factories capable of small-scale production • high-performance production, combining flexibility, productivity, precision and zero defects • energy and resource efficiency in manufacturing None of these...

A Tau-Charm Factory at CEBAF

Energy Technology Data Exchange (ETDEWEB)

Seth, K.K. [Northwestern Univ., Evanston, IL (United States)

1994-04-01

It is proposed that a Tau Charm Factory represents a natural extension of CEBAF into higher energy domains. The exciting nature of the physics of charm quarks and tau leptons is briefly reviewed and it is suggested that the concept of a linac-ring collider as a Tau Charm Factory at CEBAF should be seriously studied.

Cogeneration plant in a pasta factory: Energy saving and environmental benefit

International Nuclear Information System (INIS)

Panno, Domenico; Messineo, Antonio; Dispenza, Antonella

2007-01-01

Italy produces approximately 4,520,000 tons of pasta annually, which is about 67% of its total productive potential. As factories need electric and thermal energy simultaneously, combined heat and power (CHP) systems are the most suitable. This paper describes a feasibility study of a CHP plant in a pasta factory in Italy while analyzing energy saving and environmental benefits. Commercially available CHP systems suitable for the power range of energy demand in pasta production use reciprocating engines or gas turbines. This study demonstrates how their use can reduce both energy costs and CO 2 equivalent greenhouse gas emission in the environment. An economic analysis was performed following the methodology set out by Italian National Agency for Technology, Energy and Environment (ENEA) based on a discounted cash flow (DCF) method called 'Valore Attuale Netto' (VAN), which uses a cash flow based on the saving of energy when using different energy processes

The Three-dimensional Digital Factory for Shipbuilding Technology Research

Directory of Open Access Journals (Sweden)

Xu Wei

2016-01-01

Full Text Available The three-dimensional digital factory technology research is the hotspot in shipbuilding recently. The three-dimensional digital factory technology not only focus on design the components of the product, but also discuss on the simulation and analyses of the production process.Based on the three-dimensional model, the basic data layer, application control layer and the presentation layer of hierarchical structure are established in the three-dimensional digital factory of shipbuilding in this paper. And the key technologies of three-dimensional digital factory of shipbuilding are analysed. Finally, a case study is applied and the results show that the three-dimensional digital factory will play an important role in the future.

Diagenetic pathways in deposits of cool- and cold-water carbonate factories

Science.gov (United States)

Frank, T. D.; James, N. P.

2017-12-01

This investigation integrates sedimentological, petrographic, and geochemical observations from modern and ancient heterozoan carbonate deposits that formed at temperate to polar latitudes with the aim of evaluating diagenetic pathways characteristic of these systems. These factories operate under conditions distinct from those of photozoan counterparts. Lower temperatures, higher trophic resources, lower carbonate saturation states, and strong seasonality govern not only the nature of carbonate communities, but also how deposits translate into the rock record. In these settings, carbonate production is entirely biogenic, assemblages are of low diversity, and there are no significant calcareous phototrophs. Aragonitic taxa may be present in living communities, but allochems rapidly disappear via dissolution. Carbonate producers are not capable of building rigid frameworks, so their deposits accumulate as sands and gravels and are prone to winnowing and reworking. Low production rates lead to long seafloor residence times (1000s of years) for grains, which undergo physical reworking, dissolution, and repeated infestation by endolithic borers. Microborings remain empty, increasing grain susceptibility to disintegration. Intergranular cementation on the seafloor is rare and restricted to hardgrounds. Periods of subaerial exposure do not leave traces of meteoric alteration. Results show that the deposits of heterozoan carbonate factories tend enter the geologic record as taphonomic remnants, namely reworked, unconsolidated sands and gravels with low diagenetic potential. During burial, physical and chemical compaction produce limestones with tightly packed, grain-supported fabrics, often with grains in sutured contact. Significant cementation is associated with the deep burial realm. Results reveal a dramatically different diagenetic pathway than is typical for deposits of tropical photozoan factories, in which significant recrystallization and lithification occur on

Gauging and Etude Radio exposures in Tartous Cement Factory and Naphtha Strainer of Banias

International Nuclear Information System (INIS)

Mala, T.; Soufan, A. A.; Bofroud, T.

2009-01-01

The radio activity level was measured in both Tartous cement factory and naphtha strainer of Banias by using an electronic strumming EPD produced by E urisy F rance company and digelerat-50 strumming produced by C ope E nglish Company. It was [0.090-0.097]μSv/h that is concert with the background level of radioactivity. Some samples were taken from different places at studying areas and the radioactivity was estimated by using Gamma-ray spectroscopy. (author)

Daily changes of peak expiratory flow and respiratory symptom occurrence around a soy processing factory

NARCIS (Netherlands)

Heederik, Dick; Doekes, Gert; van Strien, Rob; Brunekreef, Bert

2014-01-01

Objectives. To evaluate sensitization and acute respiratory health effects in inhabitants living in the vicinity of a factory producing soy oil. Methods. Two panels of potential responders were created on the basis of a response to a short screening questionnaire sent to random samples of 1,000

e sup + e sup - Factories: PEP-II, KEKB, DAPHINE

CERN Document Server

Guiducci, S

2001-01-01

In 1999 two B-factories, PEP-II and KEK, and a PHI-factory, DAPHINE, started their physics experiments. A status report of the three factories is presented. A description of the interaction regions, strongly influenced by the detector requirements, and of the machine background in the detectors is presented.

Thousands of cold anti-atoms produced at CERN

CERN Multimedia

2002-01-01

The antimatter factory delivers its first major results. ATHENA has just produced thousands of anti-atoms. This is the result of techniques developed by ATRAP and ATHENA, the two collaborations aiming to study antihydrogen.

Implementing Clinical Research Using Factorial Designs: A Primer.

Science.gov (United States)

Baker, Timothy B; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Fiore, Michael C; Piper, Megan E; Collins, Linda M

2017-07-01

Factorial experiments have rarely been used in the development or evaluation of clinical interventions. However, factorial designs offer advantages over randomized controlled trial designs, the latter being much more frequently used in such research. Factorial designs are highly efficient (permitting evaluation of multiple intervention components with good statistical power) and present the opportunity to detect interactions amongst intervention components. Such advantages have led methodologists to advocate for the greater use of factorial designs in research on clinical interventions (Collins, Dziak, & Li, 2009). However, researchers considering the use of such designs in clinical research face a series of choices that have consequential implications for the interpretability and value of the experimental results. These choices include: whether to use a factorial design, selection of the number and type of factors to include, how to address the compatibility of the different factors included, whether and how to avoid confounds between the type and number of interventions a participant receives, and how to interpret interactions. The use of factorial designs in clinical intervention research poses choices that differ from those typically considered in randomized clinical trial designs. However, the great information yield of the former encourages clinical researchers' increased and careful execution of such designs. Copyright © 2017. Published by Elsevier Ltd.

Factorial correlators: angular scaling within QCD jets

International Nuclear Information System (INIS)

Peschanski, R.

2001-01-01

Factorial correlators measure the amount of dynamical correlation in the multiplicity between two separated phase-space windows. We present the analytical derivation of factorial correlators for a QCD jet described at the double logarithmic (DL) accuracy. We obtain a new angular scaling property for properly normalized correlators between two solid-angle cells or two rings around the jet axis. Normalized QCD factorial correlators scale with the angular distance and are independent of the window size. Scaling violations are expected beyond the DL approximation, in particular from the subject structure. Experimental tests are feasible, and thus would be welcome. (orig.)

The physics of the B factories

CERN Document Server

Bevan, A J; Mannel, Th; Prell, S; Yabsley, B D; Abe, K; Aihara, H; Anulli, F; Arnaud, N; Aushev, T; Beneke, M; Beringer, J; Bianchi, F; Bigi, I I; Bona, M; Brambilla, N; Brodzicka, J; Chang, P; Charles, M J; Cheng, C H; Cheng, H -Y; Chistov, R; Colangelo, P; Coleman, J P; Drutskoy, A; Druzhinin, V P; Eidelman, S; Eigen, G; Eisner, A M; Faccini, R; Flood, K T; Gambino, P; Gaz, A; Gradl, W; Hayashii, H; Higuchi, T; Hulsbergen, W D; Hurth, T; Iijima, T; Itoh, R; Jackson, P D; Kass, R; Kolomensky, Yu G; Kou, E; Križan, P; Kronfeld, A; Kumano, S; Kwon, Y J; Latham, T E; Leith, D W G S; Lüth, V; Martinez-Vidal, F; Meadows, B T; Mussa, R; Nakao, M; Nishida, S; Ocariz, J; Olsen, S L; Pakhlov, P; Pakhlova, G; Palano, A; Pich, A; Playfer, S; Poluektov, A; Porter, F C; Robertson, S H; Roney, J M; Roodman, A; Sakai, Y; Schwanda, C; Schwartz, A J; Seidl, R; Sekula, S J; Steinhauser, M; Sumisawa, K; Swanson, E S; Tackmann, F; Trabelsi, K; Uehara, S; Uno, S; van der Water, R; Vasseur, G; Verkerke, W; Waldi, R; Wang, M Z; Wilson, F F; Zupan, J; Zupanc, A; Adachi, I; Albert, J; Banerjee, Sw; Ben-Haim, E; Biassoni, P; Cahn, R N; Cartaro, C; Chauveau, J; Chen, C; Chiang, C C; Cowan, R; Dalseno, J; Davier, M; Davies, C; Dingfelder, J C; Echenard, B; Epifanov, D; Fulsom, B G; Gabareen, A M; Gary, J W; Godang, R; Graham, M T; Hafner, A; Hamilton, B; Hartmann, T; Hayasaka, K; Hearty, C; Iwasaki, Y; Khodjamirian, A; Kusaka, A; Kuzmin, A; Lafferty, G D; Lazzaro, A; Li, J; Lindemann, D; Long, O; Lusiani, A; Marchiori, G; Martinelli, M; Miyabayashi, K; Mizuk, R; Mohanty, G B; Muller, D R; Nakazawa, H; Ongmongkolkul, P; Pacetti, S; Palombo, F; Pedlar, T K; Piilonen, L E; Pilloni, A; Poireau, V; Prothmann, K; Pulliam, T; Rama, M; Ratcliff, B N; Roudeau, P; Schrenk, S; Schroeder, T; Schubert, K R; Shen, C P; Shwartz, B; Soffer, A; Solodov, E P; Somov, A; Starič, M; Stracka, S; Telnov, A V; Todyshev, K Yu; Tsuboyama, T; Uglov, T; Vinokurova, A; Walsh, J J; Watanabe, Y; Won, E; Wormser, G; Wright, D H; Ye, S; Zhang, C C; Abachi, S; Abashian, A; Abe, N; Abe, R; Abe, T; Abrams, G S; Adam, I; Adamczyk, K; Adametz, A; Adye, T; Agarwal, A; Ahmed, H; Ahmed, M; Ahmed, S; Ahn, B S; Ahn, H S; Aitchison, I J R; Akai, K; Akar, S; Akatsu, M; Akemoto, M; Akhmetshin, R; Akre, R; Alam, M S; Albert, J N; Aleksan, R; Alexander, J P; Alimonti, G; Allen, M T; Allison, J; Allmendinger, T; Alsmiller, J R G; Altenburg, D; Alwyn, K E; An, Q; Anderson, J; Andreassen, R; Andreotti, D; Andreotti, M; Andress, J C; Angelini, C; Anipko, D; Anjomshoaa, A; Anthony, P L; Antillon, E A; Antonioli, E; Aoki, K; Arguin, J F; A, K; Arisaka, K; Asai, K; Asai, M; Asano, Y; Asgeirsson, D J; Asner, D M; Aso, T; Aspinwall, M L; Aston, D; Atmacan, H; Aubert, B; Aulchenko, V; Ayad, R; Azemoon, T; Aziz, T; Azzolini, V; Azzopardi, D E; Baak, M A; Back, J J; Bagnasco, S; Bahinipati, S; Bailey, D S; Bailey, S; Bailly, P; van Bakel, N; Bakich, A M; Bala, A; Balagura, V; Baldini-Ferroli, R; Ban, Y; Banas, E; Band, H R; Banerjee, S; Baracchini, E; Barate, R; Barberio, E; Barbero, M; Bard, D J; Barillari, T; Barlow, N R; Barlow, R J; Barrett, M; Bartel, W; Bartelt, J; Bartoldus, R; Batignani, G; Battaglia, M; Bauer, J M; Bay, A; Beaulieu, M; Bechtle, P; Beck, T W; Becker, J; Becla, J; Bedny, I; Behari, S; Behera, P K; Behn, E; Behr, L; Beigbeder, C; Beiline, D; Bell, R; Bellini, F; Bellis, M; Bellodi, G; Belous, K; Benayoun, M; Benelli, G; Benitez, J F; Benkebil, M; Berger, N; Bernabeu, J; Bernard, D; Bernet, R; Bernlochner, F U; Berryhill, J W; Bertsche, K; Besson, P; Best, D S; Bettarini, S; Bettoni, D; Bhardwaj, V; Bhimji, W; Bhuyan, B; Biagini, M E; Biasini, M; van Bibber, K; Biesiada, J; Bingham, I; Bionta, R M; Bischofberger, M; Bitenc, U; Bizjak, I; Blanc, F; Blaylock, G; Blinov, V E; Bloom, E; Bloom, P C; Blount, N L; Blouw, J; Bly, M; Blyth, S; Boeheim, C T; Bomben, M; Bondar, A; Bondioli, M; Bonneaud, G R; Bonvicini, G; Booke, M; Booth, J; Borean, C; Borgland, A W; Borsato, E; Bosi, F; Bosisio, L; Botov, A A; Bougher, J; Bouldin, K; Bourgeois, P; Boutigny, D; Bowerman, D A; Boyarski, A M; Boyce, R F; Boyd, J T; Bozek, A; Bozzi, C; Bračko, M; Brandenburg, G; Brandt, T; Brau, B; Brau, J; Breon, A B; Breton, D; Brew, C; Briand, H; Bright-Thomas, P G; Brigljević, V; Britton, D I; Brochard, F; Broomer, B; Brose, J; Browder, T E; Brown, C L; Brown, C M; Brown, D N; Browne, M; Bruinsma, M; Brunet, S; Bucci, F; Buchanan, C; Buchmueller, O L; Bünger, C; Bugg, W; Bukin, A D; Bula, R; Bulten, H; Burchat, P R; Burgess, W; Burke, J P; Button-Shafer, J; Buzykaev, A R; Buzzo, A; Cai, Y; Calabrese, R; Calcaterra, A; Calderini, G; Camanzi, B; Campagna, E; Campagnari, C; Capra, R; Carassiti, V; Carpinelli, M; Carroll, M; Casarosa, G; Casey, B C K; Cason, N M; Castelli, G; Cavallo, N; Cavoto, G; Cecchi, A; Cenci, R; Cerizza, G; Cervelli, A; Ceseracciu, A; Chai, X; Chaisanguanthum, K S; Chang, M C; Chang, Y H; Chang, Y W; Chao, D S; Chao, M; Chao, Y; Charles, E; Chavez, C A; Cheaib, R; Chekelian, V; Chen, A; Chen, E; Chen, G P; Chen, H F; Chen, J -H; Chen, J C; Chen, K F; Chen, P; Chen, S; Chen, W T; Chen, X; Chen, X R; Chen, Y Q; Cheng, B; Cheon, B G; Chevalier, N; Chia, Y M; Chidzik, S; Chilikin, K; Chistiakova, M V; Cizeron, R; Cho, I S; Cho, K; Chobanova, V; Choi, H H F; Choi, K S; Choi, S K; Choi, Y; Choi, Y K; Christ, S; Chu, P H; Chun, S; Chuvikov, A; Cibinetto, G; Cinabro, D; Clark, A R; Clark, P J; Clarke, C K; Claus, R; Claxton, B; Clifton, Z C; Cochran, J; Cohen-Tanugi, J; Cohn, H; Colberg, T; Cole, S; Colecchia, F; Condurache, C; Contri, R; Convert, P; Convery, M R; Cooke, P; Copty, N; Cormack, C M; Corso, F Dal; Corwin, L A; Cossutti, F; Cote, D; Ramusino, A Cotta; Cottingham, W N; Couderc, F; Coupal, D P; Covarelli, R; Cowan, G; Craddock, W W; Crane, G; Crawley, H B; Cremaldi, L; Crescente, A; Cristinziani, M; Crnkovic, J; Crosetti, G; Cuhadar-Donszelmann, T; Cunha, A; Curry, S; D'Orazio, A; Dû, S; Dahlinger, G; Dahmes, B; Dallapiccola, C; Danielson, N; Danilov, M; Das, A; Dash, M; Dasu, S; Datta, M; Daudo, F; Dauncey, P D; David, P; Davis, C L; Day, C T; De Mori, F; De Domenico, G; De Groot, N; De la Vaissière, C; de la Vaissière, Ch; de Lesquen, A; De Nardo, G; de Sangro, R; De Silva, A; DeBarger, S; Decker, F J; Sanchez, P del Amo; Del Buono, L; Del Gamba, V; del Re, D; Della Ricca, G; Denig, A G; Derkach, D; Derrington, I M; DeStaebler, H; Destree, J; Devmal, S; Dey, B; Di Girolamo, B; Di Marco, E; Dickopp, M; Dima, M O; Dittrich, S; Dittongo, S; Dixon, P; Dneprovsky, L; Dohou, F; Doi, Y; Doležal, Z; Doll, D A; Donald, M; Dong, L; Dong, L Y; Dorfan, J; Dorigo, A; Dorsten, M P; Dowd, R; Dowdell, J; Drásal, Z; Dragic, J; Drummond, B W; Dubitzky, R S; Dubois-Felsmann, G P; Dubrovin, M S; Duh, Y C; Duh, Y T; Dujmic, D; Dungel, W; Dunwoodie, W; Dutta, D; Dvoretskii, A; Dyce, N; Ebert, M; Eckhart, E A; Ecklund, S; Eckmann, R; Eckstein, P; Edgar, C L; Edwards, A J; Egede, U; Eichenbaum, A M; Elmer, P; Emery, S; Enari, Y; Enomoto, R; Erdos, E; Erickson, R; Ernst, J A; Erwin, R J; Escalier, M; Eschenburg, V; Eschrich, I; Esen, S; Esteve, L; Evangelisti, F; Everton, C W; Eyges, V; Fabby, C; Fabozzi, F; Fahey, S; Falbo, M; Fan, S; Fang, F; Fanin, C; Farbin, A; Farhat, H; Fast, J E; Feindt, M; Fella, A; Feltresi, E; Ferber, T; Fernholz, R E; Ferrag, S; Ferrarotto, F; Ferroni, F; Field, R C; Filippi, A; Finocchiaro, G; Fioravanti, E; da Costa, J Firmino; Fischer, P -A; Fisher, A; Fisher, P H; Flacco, C J; Flack, R L; Flaecher, H U; Flanagan, J; Flanigan, J M; Ford, K E; Ford, W T; Forster, I J; Forti, A C; Forti, F; Fortin, D; Foster, B; Foulkes, S D; Fouque, G; Fox, J; Franchini, P; Sevilla, M Franco; Franek, B; Frank, E D; Fransham, K B; Fratina, S; Fratini, K; Frey, A; Frey, R; Friedl, M; Fritsch, M; Fry, J R; Fujii, H; Fujikawa, M; Fujita, Y; Fujiyama, Y; Fukunaga, C; Fukushima, M; Fullwood, J; Funahashi, Y; Funakoshi, Y; Furano, F; Furman, M; Furukawa, K; Futterschneider, H; Gabathuler, E; Gabriel, T A; Gabyshev, N; Gaede, F; Gagliardi, N; Gaidot, A; Gaillard, J -M; Gaillard, J R; Galagedera, S; Galeazzi, F; Gallo, F; Gamba, D; Gamet, R; Gan, K K; Gandini, P; Ganguly, S; Ganzhur, S F; Gao, Y Y; Gaponenko, I; Garmash, A; Tico, J Garra; Garzia, I; Gaspero, M; Gastaldi, F; Gatto, C; Gaur, V; Geddes, N I; Geld, T L; Genat, J -F; George, K A; George, M; George, S; Georgette, Z; Gershon, T J; Gill, M S; Gillard, R; Gilman, J D; Giordano, F; Giorgi, M A; Giraud, P -F; Gladney, L; Glanzman, T; Glattauer, R; Go, A; Goetzen, K; Goh, Y M; Gokhroo, G; Goldenzweig, P; Golubev, V B; Gopal, G P; Gordon, A; Gorišek, A; Goriletsky, V I; Gorodeisky, R; Gosset, L; Gotow, K; Gowdy, S J; Graffin, P; Grancagnolo, S; Grauges, E; Graziani, G; Green, M G; Greene, M G; Grenier, G J; Grenier, P; Griessinger, K; Grillo, A A; Grinyov, B V; Gritsan, A V; Grosdidier, G; Perdekamp, M Grosse; Grosso, P; Grothe, M; Groysman, Y; Grünberg, O; Guido, E; Guler, H; Gunawardane, N J W; Guo, Q H; Guo, R S; Guo, Z J; Guttman, N; Ha, H; Ha, H C; Haas, T; Haba, J; Hachtel, J; Hadavand, H K; Hadig, T; Hagner, C; Haire, M; Haitani, F; Haji, T; Haller, G; Halyo, V; Hamano, K; Hamasaki, H; de Monchenault, G Hamel; Hamilton, J; Hamilton, R; Hamon, O; Han, B Y; Han, Y L; Hanada, H; Hanagaki, K; Handa, F; Hanson, J E; Hanushevsky, A; Hara, K; Hara, T; Harada, Y; Harrison, P F; Harrison, T J; Harrop, B; Hart, A J; Hart, P A; Hartfiel, B L; Harton, J L; Haruyama, T; Hasan, A; Hasegawa, Y; Hast, C; Hastings, N C; Hasuko, K; Hauke, A; Hawkes, C M; Hayashi, K; Hazumi, M; Hee, C; Heenan, E M; Heffernan, D; Held, T; Henderson, R; Henderson, S W; Hertzbach, S S; Hervé, S; Heß, M; Heusch, C A; Hicheur, A; Higashi, Y; Higasino, Y; Higuchi, I; Hikita, S; Hill, E J; Himel, T; Hinz, L; Hirai, T; Hirano, H; Hirschauer, J F; Hitlin, D G; Hitomi, N; Hodgkinson, M C; Höcker, A; Hoi, C T; Hojo, T; Hokuue, T; Hollar, J J; Hong, T M; Honscheid, K; Hooberman, B; Hopkins, D A; Horii, Y; Hoshi, Y; Hoshina, K; Hou, S; Hou, W S; Hryn'ova, T; Hsiung, Y B; Hsu, C L; Hsu, S C; Hu, H; Hu, T; Huang, H C; Huang, T J; Huang, Y C; Huard, Z; Huffer, M E; Hufnagel, D; Hung, T; Hutchcroft, D E; Hyun, H J; Ichizawa, S; Igaki, T; Igarashi, A; Igarashi, S; Igarashi, Y; Igonkina, O; Ikado, K; Ikeda, H; Ikeda, K; Ilic, J; Inami, K; Innes, W R; Inoue, Y; Ishikawa, A; Ishino, H; Itagaki, K; Itami, S; Itoh, K; Ivanchenko, V N; Iverson, R; Iwabuchi, M; Iwai, G; Iwai, M; Iwaida, S; Iwamoto, M; Iwasaki, H; Iwasaki, M; Iwashita, T; Izen, J M; Jackson, D J; Jackson, F; Jackson, G; Jackson, P S; Jacobsen, R G; Jacoby, C; Jaegle, I; Jain, V; Jalocha, P; Jang, H K; Jasper, H; Jawahery, A; Jayatilleke, S; Jen, C M; Jensen, F; Jessop, C P; Ji, X B; John, M J J; Johnson, D R; Johnson, J R; Jolly, S; Jones, M; Joo, K K; Joshi, N; Joshi, N J; Judd, D; Julius, T; Kadel, R W; Kadyk, J A; Kagan, H; Kagan, R; Kah, D H; Kaiser, S; Kaji, H; Kajiwara, S; Kakuno, H; Kameshima, T; Kaminski, J; Kamitani, T; Kaneko, J; Kang, J H; Kang, J S; Kani, T; Kapusta, P; Karbach, T M; Karolak, M; Karyotakis, Y; Kasami, K; Katano, G; Kataoka, S U; Katayama, N; Kato, E; Kato, Y; Kawai, H; Kawai, M; Kawamura, N; Kawasaki, T; Kay, J; Kay, M; Kelly, M P; Kelsey, M H; Kent, N; Kerth, L T; Khan, A; Khan, H R; Kharakh, D; Kibayashi, A; Kichimi, H; Kiesling, C; Kikuchi, M; Kikutani, E; Kim, B H; Kim, C H; Kim, D W; Kim, H; Kim, H J; Kim, H O; Kim, H W; Kim, J B; Kim, J H; Kim, K T; Kim, M J; Kim, P; Kim, S K; Kim, S M; Kim, T H; Kim, Y I; Kim, Y J; King, G J; Kinoshita, K; Kirk, A; Kirkby, D; Kitayama, I; Klemetti, M; Klose, V; Klucar, J; Knecht, N S; Knoepfel, K J; Knowles, D J; Ko, B R; Kobayashi, N; Kobayashi, S; Kobayashi, T; Kobel, M J; Koblitz, S; Koch, H; Kocian, M L; Kodyš, P; Koeneke, K; Kofler, R; Koike, S; Koishi, S; Koiso, H; Kolb, J A; Kolya, S D; Kondo, Y; Konishi, H; Koppenburg, P; Koptchev, V B; Kordich, T M B; Korol, A A; Korotushenko, K; Korpar, S; Kouzes, R T; Kovalskyi, D; Kowalewski, R; Kozakai, Y; Kozanecki, W; Kral, J F; Krasnykh, A; Krause, R; Kravchenko, E A; Krebs, J; Kreisel, A; Kreps, M; Krishnamurthy, M; Kroeger, R; Kroeger, W; Krokovny, P; Kronenbitter, B; Kroseberg, J; Kubo, T; Kuhr, T; Kukartsev, G; Kulasiri, R; Kulikov, A; Kumar, R; Kumar, S; Kumita, T; Kuniya, T; Kunze, M; Kuo, C C; Kuo, T -L; Kurashiro, H; Kurihara, E; Kurita, N; Kuroki, Y; Kurup, A; Kutter, P E; Kuznetsova, N; Kvasnička, P; Kyberd, P; Kyeong, S H; Lacker, H M; Lae, C K; Lamanna, E; Lamsa, J; Lanceri, L; Landi, L; Lang, M I; Lange, D J; Lange, J S; Langenegger, U; Langer, M; Lankford, A J; Lanni, F; Laplace, S; Latour, E; Lau, Y P; Lavin, D R; Layter, J; Lebbolo, H; LeClerc, C; Leddig, T; Leder, G; Diberder, F Le; Lee, C L; Lee, J; Lee, J S; Lee, M C; Lee, M H; Lee, M J; Lee, S -J; Lee, S E; Lee, S H; Lee, Y J; Lees, J P; Legendre, M; Leitgab, M; Leitner, R; Leonardi, E; Leonidopoulos, C; Lepeltier, V; Leruste, Ph; Lesiak, T; Levi, M E; Levy, S L; Lewandowski, B; Lewczuk, M J; Lewis, P; Li, H; Li, H B; Li, S; Li, X; Li, Y; Gioi, L Li; Libby, J; Lidbury, J; Lillard, V; Lim, C L; Limosani, A; Lin, C S; Lin, J Y; Lin, S W; Lin, Y S; Lindquist, B; Lindsay, C; Lista, L; Liu, C; Liu, F; Liu, H; Liu, H M; Liu, J; Liu, R; Liu, T; Liu, Y; Liu, Z Q; Liventsev, D; Vetere, M Lo; Locke, C B; Lockman, W S; Di Lodovico, F; Lombardo, V; London, G W; Pegna, D Lopes; Lopez, L; Lopez-March, N; Lory, J; LoSecco, J M; Lou, X C; Louvot, R; Lu, A; Lu, C; Lu, M; Lu, R S; Lueck, T; Luitz, S; Lukin, P; Lund, P; Luppi, E; Lutz, A M; Lutz, O; Lynch, G; Lynch, H L; Lyon, A J; Lyubinsky, V R; MacFarlane, D B; Mackay, C; MacNaughton, J; Macri, M M; Madani, S; Mader, W F; Majewski, S A; Majumder, G; Makida, Y; Malaescu, B; Malaguti, R; Malclès, J; Mallik, U; Maly, E; Mamada, H; Manabe, A; Mancinelli, G; Mandelkern, M; Mandl, F; Manfredi, P F; Mangeol, D J J; Manoni, E; Mao, Z P; Margoni, M; Marker, C E; Markey, G; Marks, J; Marlow, D; Marques, V; Marsiske, H; Martellotti, S; Martin, E C; Martin, J P; Martin, L; Martinez, A J; Marzolla, M; Mass, A; Masuzawa, M; Mathieu, A; Matricon, P; Matsubara, T; Matsuda, T; Matsumoto, H; Matsumoto, S; Matsumoto, T; Matsuo, H; Mattison, T S; Matvienko, D; Matyja, A; Mayer, B; Mazur, M A; Mazzoni, M A; McCulloch, M; McDonald, J; McFall, J D; McGrath, P; McKemey, A K; McKenna, J A; Mclachlin, S E; McMahon, S; McMahon, T R; McOnie, S; Medvedeva, T; Melen, R; Mellado, B; Menges, W; Menke, S; Merchant, A M; Merkel, J; Messner, R; Metcalfe, S; Metzler, S; Meyer, N T; Meyer, T I; Meyer, W T; Michael, A K; Michelon, G; Michizono, S; Micout, P; Miftakov, V; Mihalyi, A; Mikami, Y; Milanes, D A; Milek, M; Mimashi, T; Minamora, J S; Mindas, C; Minutoli, S; Mir, L M; Mishra, K; Mitaroff, W; Miyake, H; Miyashita, T S; Miyata, H; Miyazaki, Y; Moffitt, L C; Mohapatra, A; Mohapatra, A K; Mohapatra, D; Moll, A; Moloney, G R; Mols, J P; Mommsen, R K; Monge, M R; Monorchio, D; Moore, T B; Moorhead, G F; de Freitas, P Mora; Morandin, M; Morgan, N; Morgan, S E; Morganti, M; Morganti, S; Mori, S; Mori, T; Morii, M; Morris, J P; Morsani, F; Morton, G W; Moss, L J; Mouly, J P; Mount, R; Mueller, J; Müller-Pfefferkorn, R; Mugge, M; Muheim, F; Muir, A; Mullin, E; Munerato, M; Murakami, A; Murakami, T; Muramatsu, N; Musico, P; Nagai, I; Nagamine, T; Nagasaka, Y; Nagashima, Y; Nagayama, S; Nagel, M; Naisbit, M T; Nakadaira, T; Nakahama, Y; Nakajima, M; Nakajima, T; Nakamura, I; Nakamura, T; Nakamura, T T; Nakano, E; Nakayama, H; Nam, J W; Narita, S; Narsky, I; Nash, J A; Natkaniec, Z; Nauenberg, U; Nayak, M; Neal, H; Nedelkovska, E; Negrini, M; Neichi, K; Nelson, D; Nelson, S; Neri, N; Nesom, G; Neubauer, S; Newman-Coburn, D; Ng, C; Nguyen, X; Nicholson, H; Niebuhr, C; Nief, J Y; Niiyama, M; Nikolich, M B; Nisar, N K; Nishimura, K; Nishio, Y; Nitoh, O; Nogowski, R; Noguchi, S; Nomura, T; Nordby, M; Nosochkov, Y; Novokhatski, A; Nozaki, S; Nozaki, T; Nugent, I M; O'Grady, C P; O'Neale, S W; O'Neill, F G; Oberhof, B; Oddone, P J; Ofte, I; Ogawa, A; Ogawa, K; Ogawa, S; Ogawa, Y; Ohkubo, R; Ohmi, K; Ohnishi, Y; Ohno, F; Ohshima, T; Ohshima, Y; Ohuchi, N; Oide, K; Oishi, N; Okabe, T; Okazaki, N; Okazaki, T; Okuno, S; Olaiya, E O; Olivas, A; Olley, P; Olsen, J; Ono, S; Onorato, G; Onuchin, A P; Onuki, Y; Ooba, T; Orimoto, T J; Oshima, T; Osipenkov, I L; Ostrowicz, W; Oswald, C; Otto, S; Oyang, J; Oyanguren, A; Ozaki, H; Ozcan, V E; Paar, H P; Padoan, C; Paick, K; Palka, H; Pan, B; Pan, Y; Vazquez, W Panduro; Panetta, J; Panova, A I; Panvini, R S; Panzenböck, E; Paoloni, E; Paolucci, P; Pappagallo, M; Paramesvaran, S; Park, C S; Park, C W; Park, H; Park, H K; Park, K S; Park, W; Parry, R J; Parslow, N; Passaggio, S; Pastore, F C; Patel, P M; Patrignani, C; Patteri, P; Pavel, T; Pavlovich, J; Payne, D J; Peak, L S; Peimer, D R; Pelizaeus, M; Pellegrini, R; Pelliccioni, M; Peng, C C; Peng, J C; Peng, K C; Peng, T; Penichot, Y; Pennazzi, S; Pennington, M R; Penny, R C; Penzkofer, A; Perazzo, A; Perez, A; Perl, M; Pernicka, M; Perroud, J -P; Peruzzi, I M; Pestotnik, R; Peters, K; Peters, M; Petersen, B A; Petersen, T C; Petigura, E; Petrak, S; Petrella, A; Petrič, M; Petzold, A; Pia, M G; Piatenko, T; Piccolo, D; Piccolo, M; Piemontese, L; Piemontese, M; Pierini, M; Pierson, S; Pioppi, M; Piredda, G; Pivk, M; Plaszczynski, S; Polci, F; Pompili, A; Poropat, P; Posocco, M; Potter, C T; Potter, R J L; Prasad, V; Prebys, E; Prencipe, E; Prendki, J; Prepost, R; Prest, M; Prim, M; Pripstein, M; Prudent, X; Pruvot, S; Puccio, E M T; Purohit, M V; Qi, N D; Quinn, H; Raaf, J; Rabberman, R; Raffaelli, F; Ragghianti, G; Rahatlou, S; Rahimi, A M; Rahmat, R; Rakitin, A Y; Randle-Conde, A; Rankin, P; Rashevskaya, I; Ratkovsky, S; Raven, G; Re, V; Reep, M; Regensburger, J J; Reidy, J; Reif, R; Reisert, B; Renard, C; Renga, F; Ricciardi, S; Richman, J D; Ritchie, J L; Ritter, M; Rivetta, C; Rizzo, G; Roat, C; Robbe, P; Roberts, D A; Robertson, A I; Robutti, E; Rodier, S; Rodriguez, D M; Rodriguez, J L; Rodriguez, R; Roe, N A; Röhrken, M; Roethel, W; Rolquin, J; Romanov, L; Romosan, A; Ronan, M T; Rong, G; Ronga, F J; Roos, L; Root, N; Rosen, M; Rosenberg, E I; Rossi, A; Rostomyan, A; Rotondo, M; Roussot, E; Roy, J; Rozanska, M; Rozen, Y; Rubin, A E; Ruddick, W O; Ruland, A M; Rybicki, K; Ryd, A; Ryu, S; Ryuko, J; Sabik, S; Sacco, R; Saeed, M A; Tehrani, F Safai; Sagawa, H; Sahoo, H; Sahu, S; Saigo, M; Saito, T; Saitoh, S; Sakai, K; Sakamoto, H; Sakaue, H; Saleem, M; Salnikov, A A; Salvati, E; Salvatore, F; Samuel, A; Sanders, D A; Sanders, P; Sandilya, S; Sandrelli, F; Sands, W; Sands, W R; Sanpei, M; Santel, D; Santelj, L; Santoro, V; Santroni, A; Sanuki, T; Sarangi, T R; Saremi, S; Sarti, A; Sasaki, T; Sasao, N; Satapathy, M; Sato, Nobuhiko; Sato, Noriaki; Sato, Y; Satoyama, N; Satpathy, A; Savinov, V; Savvas, N; Saxton, O H; Sayeed, K; Schaffner, S F; Schalk, T; Schenk, S; Schieck, J R; Schietinger, T; Schilling, C J; Schindler, R H; Schmid, S; Schmitz, R E; Schmuecker, H; Schneider, O; Schnell, G; Schönmeier, P; Schofield, K C; Schott, G; Schröder, H; Schram, M; Schubert, J; Schümann, J; Schultz, J; Schumm, B A; Schune, M H; Schwanke, U; Schwarz, H; Schwiening, J; Schwierz, R; Schwitters, R F; Sciacca, C; Sciolla, G; Scott, I J; Seeman, J; Seiden, A; Seitz, R; Seki, T; Sekiya, A I; Semenov, S; Semmler, D; Sen, S; Senyo, K; Seon, O; Serbo, V V; Serednyakov, S I; Serfass, B; Serra, M; Serrano, J; Settai, Y; Seuster, R; Sevior, M E; Shakhova, K V; Shang, L; Shapkin, M; Sharma, V; Shebalin, V; Shelkov, V G; Shen, B C; Shen, D Z; Shen, Y T; Sherwood, D J; Shibata, T; Shibata, T A; Shibuya, H; Shidara, T; Shimada, K; Shimoyama, M; Shinomiya, S; Shiu, J G; Shorthouse, H W; Shpilinskaya, L I; Sibidanov, A; Sicard, E; Sidorov, A; Sidorov, V; Siegle, V; Sigamani, M; Simani, M C; Simard, M; Simi, G; Simon, F; Simonetto, F; Sinev, N B; Singh, H; Singh, J B; Sinha, R; Sitt, S; Skovpen, Yu I; Sloane, R J; Smerkol, P; Smith, A J S; Smith, D; Smith, D S; Smith, J G; Smol, A; Snoek, H L; Snyder, A; So, R Y; Sobie, R J; Soderstrom, E; Soha, A; Sohn, Y S; Sokoloff, M D; Sokolov, A; Solagna, P; Solovieva, E; Soni, N; Sonnek, P; Sordini, V; Spaan, B; Spanier, S M; Spencer, E; Speziali, V; Spitznagel, M; Spradlin, P; Staengle, H; Stamen, R; Stanek, M; Stanič, S; Stark, J; Steder, M; Steininger, H; Steinke, M; Stelzer, J; Stevanato, E; Stocchi, A; Stock, R; Stoeck, H; Stoker, D P; Stroili, R; Strom, D; Strother, P; Strube, J; Stugu, B; Stypula, J; Su, D; Suda, R; Sugahara, R; Sugi, A; Sugimura, T; Sugiyama, A; Suitoh, S; Sullivan, M K; Sumihama, M; Sumiyoshi, T; Summers, D J; Sun, L; Sun, S; Sundermann, J E; Sung, H F; Susaki, Y; Sutcliffe, P; Suzuki, A; Suzuki, J; Suzuki, J I; Suzuki, K; Suzuki, S; Suzuki, S Y; Swain, J E; Swain, S K; T'Jampens, S; Tabata, M; Tackmann, K; Tajima, H; Tajima, O; Takahashi, K; Takahashi, S; Takahashi, T; Takasaki, F; Takayama, T; Takita, M; Tamai, K; Tamponi, U; Tamura, N; Tan, N; Tan, P; Tanabe, K; Tanabe, T; Tanaka, H A; Tanaka, J; Tanaka, M; Tanaka, S; Tanaka, Y; Tanida, K; Taniguchi, N; Taras, P; Tasneem, N; Tatishvili, G; Tatomi, T; Tawada, M; Taylor, F; Taylor, G N; Taylor, G P; Telnov, V I; Teodorescu, L; Ter-Antonyan, R; Teramoto, Y; Teytelman, D; Thérin, G; Thiebaux, Ch; Thiessen, D; Thomas, E W; Thompson, J M; Thorne, F; Tian, X C; Tibbetts, M; Tikhomirov, I; Tinslay, J S; Tiozzo, G; Tisserand, V; Tocut, V; Toki, W H; Tomassini, E W; Tomoto, M; Tomura, T; Torassa, E; Torrence, E; Tosi, S; Touramanis, C; Toussaint, J C; Tovey, S N; Trapani, P P; Treadwell, E; Triggiani, G; Trincaz-Duvoid, S; Trischuk, W; Troost, D; Trunov, A; Tsai, K L; Tsai, Y T; Tsujita, Y; Tsukada, K; Tsukamoto, T; Tuggle, J M; Tumanov, A; Tung, Y W; Turnbull, L; Turner, J; Turri, M; Uchida, K; Uchida, M; Uchida, Y; Ueki, M; Ueno, K; Ujiie, N; Ulmer, K A; Unno, Y; Urquijo, P; Ushiroda, Y; Usov, Y; Usseglio, M; Usuki, Y; Uwer, U; Va'vra, J; Vahsen, S E; Vaitsas, G; Valassi, A; Vallazza, E; Vallereau, A; Vanhoefer, P; van Hoek, W C; Van Hulse, C; van Winkle, D; Varner, G; Varnes, E W; Varvell, K E; Vasileiadis, G; Velikzhanin, Y S; Verderi, M; Versillé, S; Vervink, K; Viaud, B; Vidal, P B; Villa, S; Villanueva-Perez, P; Vinograd, E L; Vitale, L; Vitug, G M; Voß, C; Voci, C; Voena, C; Volk, A; von Wimmersperg-Toeller, J H; Vorobyev, V; Vossen, A; Vuagnin, G; Vuosalo, C O; Wacker, K; Wagner, A P; Wagner, D L; Wagner, G; Wagner, M N; Wagner, S R; Wagoner, D E; Walker, D; Walkowiak, W; Wallom, D; Wang, C C; Wang, C H; Wang, J; Wang, J G; Wang, K; Wang, L; Wang, L L; Wang, P; Wang, T J; Wang, W F; Wang, X L; Wang, Y F; Wappler, F R; Watanabe, M; Watson, A T; Watson, J E; Watson, N K; Watt, M; Weatherall, J H; Weaver, M; Weber, T; Wedd, R; Wei, J T; Weidemann, A W; W, A J R; Wenzel, W A; West, C A; West, C G; West, T J; White, R M; Wicht, J; Widhalm, L; Wiechczynski, J; Wienands, U; Wilden, L; Wilder, M; Williams, D C; Williams, G; Williams, J C; Williams, K M; Williams, M I; Willocq, S Y; Wilson, J R; Wilson, M G; Wilson, R J; Winklmeier, F; Winter, M A; Wisniewski, W J; Wittgen, M; Wittlin, J; Wittmer, W; Wixted, R; Woch, A; Wogsland, B J; Wong, Q K; Wray, B C; Wren, A C; Wright, D M; Wu, C H; Wu, J; Wu, S L; Wulsin, H W; Xella, S M; Xie, Q L; Xie, Y; Xu, Z Z; Yèche, Ch; Yamada, Y; Yamaga, M; Yamaguchi, A; Yamaguchi, H; Yamaki, T; Yamamoto, H; Yamamoto, N; Yamamoto, R K; Yamamoto, S; Yamanaka, T; Yamaoka, H; Yamaoka, J; Yamaoka, Y; Yamashita, Y; Yamauchi, M; Yan, D S; Yan, Y; Yanai, H; Yanaka, S; Yang, H; Yang, R; Yang, S; Yarritu, A K; Yashchenko, S; Yashima, J; Yasin, Z; Yasu, Y; Ye, S W; Yeh, P; Yi, J I; Yi, K; Yi, M; Yin, Z W; Ying, J; Yocky, G; Yokoyama, K; Yokoyama, M; Yokoyama, T; Yoshida, K; Yoshida, M; Yoshimura, Y; Young, C C; Yu, C X; Yu, Z; Yuan, C Z; Yuan, Y; Yumiceva, F X; Yusa, Y; Yushkov, A N; Yuta, H; Zacek, V; Zain, S B; Zallo, A; Zambito, S; Zander, D; Zang, S L; Zanin, D; Zaslavsky, B G; Zeng, Q L; Zghiche, A; Zhang, B; Zhang, J; Zhang, L; Zhang, L M; Zhang, S Q; Zhang, Z P; Zhao, H W; Zhao, M; Zhao, Z G; Zheng, Y; Zheng, Y H; Zheng, Z P; Zhilich, V; Zhou, P; Zhu, R Y; Zhu, Y S; Zhu, Z M; Zhulanov, V; Ziegler, T; Ziegler, V; Zioulas, G; Zisman, M; Zito, M; Zürcher, D; Zwahlen, N; Zyukova, O; Živko, T; Žontar, D; Bevan, Adrian; Golob, Bostjan; Mannel, Thomas; Prell, Soeren; Yabsley, Bruce

2014-01-01

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.

Evaluation of leachate quality from pentachlorophenol, creosote and ACA [ammoniacal chromium arsenate] preserved wood products

International Nuclear Information System (INIS)

Whiticar, D.M.; Letourneau, L.; Konasewich, D.

1994-01-01

A field study was conducted to evaluate the leachability characteristics of pentachlorophenol (PCP), creosote, and ammoniacal chromium arsenate (ACA) wood preservatives from freshly treated wood products. Test products included PCP-treated utility poles, creosote-treated timbers and marine pilings, and ACA-treated utility poles. Bundles of test products were placed over collection trays to collect the leachate generated by natural rainfall and by sprinkling with tap water. The sampling schedule was based on accumulated rainfall with samples taken at about every 15 mm from 15 mm to 150 mm. Analyses included pH, oil and grease, total organic carbon, ammonia, metals, polynuclear aromatic hydrocarbons (PAH), chlorinated and nonchlorinated phenols, resin acids, and fish toxicity. The study indicated that leachates from wood products freshly treated with ACA, creosote, and PCP have potential for aquatic toxicity if released to the environment. A decreasing trend was noted in both the arsenic and copper releases as cumulative precipitation increased. PCP releases remained constant over the course of the study while PAH releases showed no significant trend. Phenanthrene was found to be the main component in the releases. 28 refs., 18 figs., 7 tabs

Three-dimensional structure of Rubella virus factories

International Nuclear Information System (INIS)

Fontana, Juan; Lopez-Iglesias, Carmen; Tzeng, Wen-Ping; Frey, Teryl K.; Fernandez, Jose J.; Risco, Cristina

2010-01-01

Viral factories are complex structures in the infected cell where viruses compartmentalize their life cycle. Rubella virus (RUBV) assembles factories by recruitment of rough endoplasmic reticulum (RER), mitochondria and Golgi around modified lysosomes known as cytopathic vacuoles or CPVs. These organelles contain active replication complexes that transfer replicated RNA to assembly sites in Golgi membranes. We have studied the structure of RUBV factory in three dimensions by electron tomography and freeze-fracture. CPVs contain stacked membranes, rigid sheets, small vesicles and large vacuoles. These membranes are interconnected and in communication with the endocytic pathway since they incorporate endocytosed BSA-gold. RER and CPVs are coupled through protein bridges and closely apposed membranes. Golgi vesicles attach to the CPVs but no tight contacts with mitochondria were detected. Immunogold labelling confirmed that the mitochondrial protein p32 is an abundant component around and inside CPVs where it could play important roles in factory activities.

On the use of metabolic control analysis in the optimization of cyanobacterial biosolar cell factories.

Science.gov (United States)

Angermayr, S Andreas; Hellingwerf, Klaas J

2013-09-26

Oxygenic photosynthesis will have a key role in a sustainable future. It is therefore significant that this process can be engineered in organisms such as cyanobacteria to construct cell factories that catalyze the (sun)light-driven conversion of CO2 and water into products like ethanol, butanol, or other biofuels or lactic acid, a bioplastic precursor, and oxygen as a byproduct. It is of key importance to optimize such cell factories to maximal efficiency. This holds for their light-harvesting capabilities under, for example, circadian illumination in large-scale photobioreactors. However, this also holds for the "dark" reactions of photosynthesis, that is, the conversion of CO2, NADPH, and ATP into a product. Here, we present an analysis, based on metabolic control theory, to estimate the optimal capacity for product formation with which such cyanobacterial cell factories have to be equipped. Engineered l-lactic acid producing Synechocystis sp. PCC6803 strains are used to identify the relation between production rate and enzymatic capacity. The analysis shows that the engineered cell factories for l-lactic acid are fully limited by the metabolic capacity of the product-forming pathway. We attribute this to the fact that currently available promoter systems in cyanobacteria lack the genetic capacity to a provide sufficient expression in single-gene doses.

B-factory detectors

International Nuclear Information System (INIS)

Marlow, D.R.

2002-01-01

The designs of the recently commissioned BaBar and Belle B-Factory detectors are described. The discussion is organized around the methods and instruments used to detect the so-called gold-plated-mode B 0 →J/ΨK S decays and related modes

Accelerator and Technical Sector Seminar: Future neutrino facilities: the neutrino factory

CERN Multimedia

2012-01-01

Thursday 19.January 2012 at 14:15  -  IT Auditorium (bldg. 31 3-004) Future neutrino facilities: the neutrino factory by Gersende Prior / University of Geneva and CERN EN/MEF The neutrino factory is one of the proposed designs for a future intense neutrino beam facility. In its current layout, a high-power proton beam impinges on an Hg jet target producing pions, decaying in turn into muons. In order to reduce the particle beam emittance, the muon transverse momentum is reduced through ionization cooling by a technically demanding set-up made of closely-packed RF cavities alternating with absorbers. In this talk I will present the motivation for building an intense neutrino beam and some of the proposed neutrino facilities' design. I will discuss the challenges inherent to the cooling of muons, possible optimization of the current baseline and the on-going R&D. ________________ ATS Seminars Organisers: H. Burkhardt (BE), S. Sgobba (EN), G. deRijk (TE)

The benefits of conducting factory performance tests for main mine fans

Energy Technology Data Exchange (ETDEWEB)

Ray, R.E.Jr. [PB Americas Inc., New York, NY (United States); Gamble, G.A. [Clarage Twin City Fan Co., Akron, OH (United States)

2010-07-01

Axial flow fans used in underground mining are also commonly used in subway tunnel ventilation fans to provide an evacuation path during a tunnel fire emergency. The axial flow fans provide sufficient air velocity to the fire site to prevent backlayering of smoke against the incoming airflow. Since the tunnels are used by the public, advance testing of fans and motors is conducted to confirm that the equipment will perform as specified during a fire. This paper discussed some of the advantages derived from conducting fan factory tests for tunnel projects that would also apply to mining applications. It also described other benefits from testing that are unique to mining. External factors that may cause the fan performance to vary considerably from the predicted performance measured at the factory were also discussed. These included air density changes and system effects produced by poorly designed shaft configurations and fan inlet ductwork. 11 refs., 6 figs.

Cyanobacteria as Cell Factories to Produce Plant Secondary Metabolites

OpenAIRE

Xue, Yong; He, Qingfang

2015-01-01

Cyanobacteria represent a promising platform for the production of plant secondary metabolites. Their capacity to express plant P450 proteins, which have essential functions in the biosynthesis of many plant secondary metabolites, makes cyanobacteria ideal for this purpose, and their photosynthetic capability allows cyanobacteria to grow with simple nutrient inputs. This review summarizes the advantages of using cyanobacteria to transgenically produce plant secondary metabolites. Some techniq...

INDOOR THERMAL CONDITION OF FACTORY BUILDING IN BANGLADESH

OpenAIRE

Muhammed Abdullah Al Sayem Khan; Mohd. Hamdan Ahmad; Tareef Hayat Khan

2011-01-01

Bangladesh is a developing country and has a lot of factories for different products for local use and also export to abroad. Garments industries are one of the top most items of exported items. A huge number of populations are working in garments industries. But these factories are not well designed in sense of the thermal environment. Workers experiences sickness related to indoor environment. The productions of these factories are affected due to employees’ health condition. The research i...

TRIUMF kaon factory plans

International Nuclear Information System (INIS)

Blackmore, E.W.

1983-01-01

A progress report on the TRIUMF Kaon Factory Feasibility Study is presented. The requirements placed on the machine parameters and experimental facilities by the potentially interesting experiments are discussed

TRIUMF kaon factory plans

International Nuclear Information System (INIS)

Blackmore, E.W.

1982-11-01

A progress report on the TRIUMF Kaon Factory Feasibility Study is presented. The requirements placed on the machine parameters and experimental facilities by the potentially interesting experiments are discussed

The effect of ammonium chloride and urea application on soil bacterial communities closely related to the reductive transformation of pentachlorophenol.

Science.gov (United States)

Yu, Huan-Yun; Wang, Yong-kui; Chen, Peng-cheng; Li, Fang-bai; Chen, Man-jia; Hu, Min

2014-05-15

Pentachlorophenol (PCP) is widely distributed in the soil, and nitrogen fertilizer is extensively used in agricultural production. However, studies on the fate of organic contaminants as affected by nitrogen fertilizer application have been rare and superficial. The present study aimed to examine the effect of ammonium chloride (NH4Cl) and urea (CO(NH2)2) application on the reductive transformation of PCP in a paddy soil. The study showed that the addition of low concentrations of NH4Cl/CO(NH2)2 enhanced the transformation of PCP, while the addition of high concentrations of NH4Cl/CO(NH2)2 had the opposite effect. The variations in the abundance of soil microbes in response to NH4Cl/CO(NH2)2 addition showed that both NH4Cl and CO(NH2)2 had inhibitory effects on the growth of dissimilatory iron-reducing bacteria (DIRB) of the genus Comamonas. In contrast, for the genus Shewanella, low concentrations of NH4Cl inhibited growth, and high concentrations of NH4Cl enhanced growth, whereas all concentrations of CO(NH2)2 showed enhancement effects. In addition, consistent patterns of variation were found between the abundances of dechlorinating bacteria in the genus Dehalobacter and PCP transformation rates under NH4Cl/CO(NH2)2 addition. In conclusion, nitrogen application produced variations in the structure of the soil microbial community, especially in the abundance of dissimilatory iron-reducing bacteria and dechlorinating bacteria, which, in turn, affected PCP dechlorination. Copyright © 2014 Elsevier B.V. All rights reserved.

A superconducting focusing solenoid for the neutrino factory linear accelerator

International Nuclear Information System (INIS)

Green, Michael A.; Lebedev, V.; Strauss, B.P.

2001-01-01

The proposed linear Accelerator that accelerates muons from 190 MeV to 2.45 GeV will use superconducting solenoids for focusing the muon beam. The accelerator will use superconducting RF cavities. These cavities are very sensitive to stay magnetic field from the focusing magnets. Superconducting solenoids can produce large stray fields. This report describes the 201.25 MHz acceleration system for the neutrino factory. This report also describes a focusing solenoid that delivers almost no stray field to a neighboring superconducting RF cavity

An Interactive Simulation Tool for Production Planning in Bacon Factories

DEFF Research Database (Denmark)

Nielsen, Jens Frederik Dalsgaard; Nielsen, Kirsten Mølgaard

1994-01-01

The paper describes an interactive simulation tool for production planning in bacon factories. The main aim of the tool is to make it possible to combine the production plans of all parts of the factory......The paper describes an interactive simulation tool for production planning in bacon factories. The main aim of the tool is to make it possible to combine the production plans of all parts of the factory...

Photon Factory activity report, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The Photon Factory at the National Laboratory for High Energy Physics is a national facility for scientific research utilizing synchrotron radiation. Although the Photon Factory operator the linear injector, two light sources including the 2.5 GeV storage ring and the 6.5 GeV TRISTAN accumulation Ring as well as a major fraction of their beamlines and experimental station. This report is covered the period from October 1994 to September 1995. The total number of proposals by this PAC was 399 in 1995. Facility development projects currently in progress include the following, TRISTAN Super Light Facility (TSLF) project, VUV-FEL project, KEKB project and Slow-positron Source. This report contents outline of the Photon Factory, introduction, scientific disciplines, electronic properties of condensed matters, atomic and molecular science, X-ray imaging, radiobiology using synchrotron radiation, structural properties of condensed matters, structural properties of solid surfaces and adsorbates, structure and function of proteins, theoretical researches, experimental facilities, beamlines, new instrumentation, AR Upgrade, collaborations, projects, user`s short reports, list of published papers 1994/95. (S.Y.)

Photon Factory activity report, 1995

International Nuclear Information System (INIS)

1996-01-01

The Photon Factory at the National Laboratory for High Energy Physics is a national facility for scientific research utilizing synchrotron radiation. Although the Photon Factory operator the linear injector, two light sources including the 2.5 GeV storage ring and the 6.5 GeV TRISTAN accumulation Ring as well as a major fraction of their beamlines and experimental station. This report is covered the period from October 1994 to September 1995. The total number of proposals by this PAC was 399 in 1995. Facility development projects currently in progress include the following, TRISTAN Super Light Facility (TSLF) project, VUV-FEL project, KEKB project and Slow-positron Source. This report contents outline of the Photon Factory, introduction, scientific disciplines, electronic properties of condensed matters, atomic and molecular science, X-ray imaging, radiobiology using synchrotron radiation, structural properties of condensed matters, structural properties of solid surfaces and adsorbates, structure and function of proteins, theoretical researches, experimental facilities, beamlines, new instrumentation, AR Upgrade, collaborations, projects, user's short reports, list of published papers 1994/95. (S.Y.)

Photon Factory activity report, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The Photon Factory at the National Laboratory for High Energy Physics is a national facility for scientific research utilizing synchrotron radiation. Although the Photon Factory operator the linear injector, two light sources including the 2.5 GeV storage ring and the 6.5 GeV TRISTAN accumulation Ring as well as a major fraction of their beamlines and experimental station. This report is covered the period from October 1994 to September 1995. The total number of proposals by this PAC was 399 in 1995. Facility development projects currently in progress include the following, TRISTAN Super Light Facility (TSLF) project, VUV-FEL project, KEKB project and Slow-positron Source. This report contents outline of the Photon Factory, introduction, scientific disciplines, electronic properties of condensed matters, atomic and molecular science, X-ray imaging, radiobiology using synchrotron radiation, structural properties of condensed matters, structural properties of solid surfaces and adsorbates, structure and function of proteins, theoretical researches, experimental facilities, beamlines, new instrumentation, AR Upgrade, collaborations, projects, user`s short reports, list of published papers 1994/95. (S.Y.)

DEVELOPMENT OF LAW RELATING TO FACTORIES IN INDIA

Directory of Open Access Journals (Sweden)

M. K. Sahu

2015-01-01

Full Text Available The rapid growth of industrial town and factories has paved the way to develop our industrial legislation accordingly. The Government of India never expressed their interest in framing separate legislation vis-à-vis factories which resulted in implementation of the same statute which was enacted pre-independence. It was done by virtue of Art. 372 of the Constitution of India. However, the Constitutional Lawmakers created vacuum for the implementation of new statute in accordance with the demand of society by inserting scope under the Directive Principles of State Policies. However, in the 67 years history of Indian Republic, there are unprecedented developments of law relating to factories in India.The Government of India, with the adoption of existed statute, made an effort to incorporate the welfare legislation but it never developed along with the change in time. It is to be noticed that as far as existing statutes are concerned, the development is an effect of judicial pronouncement or some tragic incident like Bhopal Gas Tragedy. This paper succinctly describes the history of factory legislation, the constitutional validity of the previous statute and necessary amendment which have already been done and / or on the verge of being amended. It will further discuss contribution of judiciary in developing the law relating to factories, scope of industrial jurisprudence in promoting the development of factory legislation. The primary focus of the research project is to reflect upon the areas where factory legislation has developed, so that proper yardstick could be made in order to put emphasis on those areas which have been remained untouched.

On KEK B-Factory

Science.gov (United States)

Sugawara, H.

2009-07-01

There are two principles which the management of a research institute like KEK must respect when dealing with such big project as B-Factory. One is the scientific merit of the project and the other is the organizational consideration which includes financial, human, technical and historical elements. Ideally, the two principles are to be fully taken into account. But, in many cases, one or the other is only partially fulfilled due to unavoidable circumstances. The lack of flexibility to respond to all possible situations is more dangerous and may lead to a disaster as in the case of SSC. I will describe the process which lead to the successful construction, operation and physics presentations of KEK B-Factory following faithfully the official records.

Engineering the smart factory

Science.gov (United States)

Harrison, Robert; Vera, Daniel; Ahmad, Bilal

2016-10-01

The fourth industrial revolution promises to create what has been called the smart factory. The vision is that within such modular structured smart factories, cyber-physical systems monitor physical processes, create a virtual copy of the physical world and make decentralised decisions. This paper provides a view of this initiative from an automation systems perspective. In this context it considers how future automation systems might be effectively configured and supported through their lifecycles and how integration, application modelling, visualisation and reuse of such systems might be best achieved. The paper briefly describes limitations in current engineering methods, and new emerging approaches including the cyber physical systems (CPS) engineering tools being developed by the automation systems group (ASG) at Warwick Manufacturing Group, University of Warwick, UK.

On KEK B-factory

International Nuclear Information System (INIS)

Sugawara, Hirotaka

2009-01-01

There are two principles which the management of a research institute like KEK must respect when dealing with such big project as B-Factory. One is the scientific merit of the project and the other is the organizational consideration which includes financial, human, technical and historical elements. Ideally, the two principles are to be fully taken into account. But, in many cases, one or the other is only partially fulfilled due to unavoidable circumstances. The lack of flexibility to respond to all possible situations is more dangerous and may lead to a disaster as in the case of SSC. I will describe the process which lead to the successful construction, operation and physics presentations of KEK B-Factory following faithfully the official records. (author)

Factory automation for heavy electric equipment

International Nuclear Information System (INIS)

Rokutani, Takashi; Ninomiya, Iwao; Hatayama, Naokatsu; Kato, Hiroshi; Yano, Hideaki.

1986-01-01

The heightening of productivity in the factories manufacturing heavy electric equipment has been advanced so far by the rationalization of direct workings such as NC, robots and the adoption of FMS (flexible manufacturing system). However, as CAD advances, the effective utilization of these data and the expansion to future CIM (computer integrated manufacture) have become to be demanded. In the Hitachi Works of Hitachi Ltd., it was decided to advance the synthetic rationalization by adopting FA (factory automation) system. Steam turbine blades, pipings for nuclear power plants and motor coils were taken up as the objects since these are important parts, and for the purpose of the drastic heightening of QA level, the heightening of accuracy and the shortening of processes, the synchronization with field installation schedule and the creation of safe working place environment, the FA projects for these three sections were simultaneously planned. When the automation of non-mass production factories is promoted, there are the unmanned factories combining FMS lines for relatively many products and those characterized by FMC of shortening preparation time for small lot products, and this is the examples of the former. The system constitution for FA and the production management combined with it are described. The high reliability of the optical network was regarded as important. (Kako, I.)

KUSTANNUS JA KANNATTAVUUSLASKENNAN KEHITTÄMINEN CASE KOTEK FACTORY SERVICE OY

OpenAIRE

Ilmonen, Hanna

2009-01-01

Opinnäytetyön toimeksiantajana oli Kotek Factory Service Oy ja kohteena oli Kotek Factory Service Oy:n maalaamo. Kotek Factory Service on Chesterton ARC- pinnoitteiden maahantuoja ja myyjä, joka vastaa tuotteidensa erilaisista urakoinneista, täydellisinä palvelukokonaisuuksina. Opinnäytetyön tavoitteena oli saada aikaiseksi toimintaehdotus siitä, kuinka Kotek Factory Service Oy voisi kehittää kustannus ja kannattavuuslaskentaansa maalaamon ja koko yrityksen osalta. Ongelmaan haettiin ratk...

Ergonomic analysis jobs in recovered factories.

Science.gov (United States)

Cuenca, Gabriela; Zotta, Gastón

2012-01-01

With the advent of the deep economic crisis in Argentina on 2001, the recovery of companies through to the creation of the Cooperatives Working Self-Management or Factories Recovered by its workers was constituted as one of the ways in which the salaried disobeyed the increasing unemployment. When the companies turn into recovered factories they tend to leave of side practices that have been seen like imposed by the previous organization and not understanding them as a primary condition for the execution of his tasks. Safety and ergonomics are two disciplines that are no longer considered relevant to the daily work. Therefore this investigation aims to revalue, undergo semantic to give back to a place in every organization analyzed. This research developed a self-diagnostic tool for working conditions, and the environment, present in the recovered factories.

Review of U.S. Neutrino Factory Studies

International Nuclear Information System (INIS)

Zisman, Michael S.

2005-01-01

We summarize the status of the two U.S. feasibility studies carried out by the Neutrino Factory and Muon Collider Collaboration (NFMCC) along with recent improvements to Neutrino Factory design developed during the American Physical Society (APS) Neutrino Physics Study. Suggested accelerator topics for the International Scoping Study (ISS) are also indicated

Mainz/PSI φ-factory design considerations

International Nuclear Information System (INIS)

Streun, A.

1991-01-01

Design considerations for a φ-factory with a Luminosity of the order of 10 33 cm -2 s -1 lead to the concept of a multi-bunch round beam double storage ring with superconducting solenoids for micro-beta focusing and beam rotation. Simulations of the beam-beam-interaction indicate, that significantly higher beam-beam-parameters may become possible with round beams. A rough draft design of a round beam φ-factory is presented. (orig.)

A highly stable electrochemiluminescence sensing system of cadmium sulfide nanowires/graphene hybrid for supersensitive detection of pentachlorophenol

Science.gov (United States)

Deng, Yanan; Chang, Quanying; Yin, Kai; Liu, Chengbin; Wang, Ying

2017-10-01

A highly stable and effective electrochemiluminescence (ECL) sensing system of cadmium sulfide nanowires/reduced graphene oxide (CdS NWS/rGO) hybrid is presented for supersensitive detection of pentachlorophenol (PCP). CdS nanowire is for the first time exploited in ECL sensing. The rGO served as both ECL signal amplifier and immobilization platform, can perfectly enhance the ECL intensity and stability of the sensing system. With S2O82- as coreactant, the ECL signal can be significantly quenched by the addition of PCP. The established ECL sensing system presents a wider linear range from 1.0 × 10-14 to 1.0 × 10-8 M and a much low detection limit of 2 × 10-15 M under the optimum test conditions (e.g., pH 7.0 and 100 mM S2O82-). Furthermore, the ECL sensing system displays a good selectivity for PCP detection. The practicability of the ECL sensing system in real water sample shows that this system could be promisingly applied in the analytical detection of PCP in real water environments.

Design Studies for a 1036 SuperB-Factory

International Nuclear Information System (INIS)

Seeman, J

2003-01-01

A Super B Factory, an asymmetric e + e - collider with a luminosity of 10 36 cm -2 s -1 , can provide a sensitive probe of new physics in the flavor sector of the Standard Model. The success of PEP-II and KEKB in producing unprecedented luminosity with unprecedented short commissioning time has taught us about the accelerator physics of asymmetric e + e - colliders in a new parameter regime. It appears to be possible to build on this success to advance the state of the accelerator art by building a collider at a luminosity approaching 10 36 cm -2 s -1 . Such a collider would produce an integrated luminosity of 10,000 fb -1 (10 ab -1 ) in a running year. Design studies are underway to arrive at a complete parameter set based on a collider in the PEP-II tunnel but with an upgraded RF system (perhaps a higher frequency) and an upgraded interaction region [1-6

The Clone Factory

Science.gov (United States)

Stoddard, Beryl

2005-01-01

Have humans been cloned? Is it possible? Immediate interest is sparked when students are asked these questions. In response to their curiosity, the clone factory activity was developed to help them understand the process of cloning. In this activity, students reenact the cloning process, in a very simplified simulation. After completing the…

Photon Factory activity report, 1990

International Nuclear Information System (INIS)

1991-01-01

The Photon Factory has grown at a considerable rate, and 600 experiments are carried out in 1991, while the number of users is now 2300 including about 500 from industrial sectors. The use of synchrotron radiation increased from fundamental research to industrial development. The development at the Photon Factory is supported by the capability of the accelerators. At present, the 2.5 GeV PF ring is operated with positrons at the initial beam current of 350 mA. The total operation time was 3500 hours in the fiscal year 1990. The development of an avalanche mode photodiode, the observation of quantum beat in the experiment of nuclear Bragg scattering, the measurement of photo-electron and photo-ion spectroscopy were carried out. The conversion of TRISTAN main ring to an ultrahigh brilliance and high coherence source is planned for the future. The annual PF Symposium was held, and Professor H. Winick gave the lecture 'Ultrahigh brightness and coherent radiation from large storage rings'. In this report, the outline of the Photon Factory and the activities in Divisions of Injector Linac, Light Source and Instrumentation are described. (K.I.)

The Virtual Factory Teaching System (VFTS): Project Review and Results.

Science.gov (United States)

Kazlauskas, E. J.; Boyd, E. F., III; Dessouky, M. M.

This paper presents a review of the Virtual Factory Teaching (VFTS) project, a Web-based, multimedia collaborative learning network. The system allows students, working alone or in teams, to build factories, forecast demand for products, plan production, establish release rules for new work into the factory, and set scheduling rules for…

A conceptual design of circular Higgs factory

Energy Technology Data Exchange (ETDEWEB)

Cai, Yunhai

2016-11-30

Similar to a super B-factory, a circular Higgs factory (CHF) will require strong focusing systems near the interaction points and a low-emittance lattice in the arcs to achieve a factory luminosity. At electron beam energy of 125 GeV, beamstrahlung effects during the collision pose an additional challenge to the collider design. In particular, a large momentum acceptance at the 2% level is necessary to retain an adequate beam lifetime. This turns out to be the most challenging aspect in the design of a CHF. In this paper, an example will be provided to illustrate the beam dynamics in a CHF, emphasizing the chromatic optics. Basic optical modules and advanced analysis will be presented. Most importantly, we will show that 2% momentum aperture is achievable.

Four-legged factories

International Nuclear Information System (INIS)

Mackie, R.I.; Van der Walt, J.G.

1982-01-01

Insight into how ruminants utilise plant material, converting what is essentially waste into food, wool and draught power for Man is being sought by Animal Scientists using isotopic tracer techniques. Answers to cost-effectice biological conversion lie in the complex interactions of the rumen's microbial fermentation factory and the host animal's diet and metabolism

Measurement of Air Pollution Comes from Adra Cement Factory

International Nuclear Information System (INIS)

Odat, M.; Meslmani, Y.; Al-Kharfan, K.; Shamali, K.

2013-06-01

Measurements of air pollution were carried out in and around Adra cement factory during a single period (December). The Measurements included the following: 1- Dust fall. 2- Total suspended particulates (TSP) and inhalable particulates PM-1-0 & PM-3 inside the factor and in residential area surrounded the factory (Worker City of Adra, Adra city, Wafeden Mokheam, Baironi Hospital and Alkatiefa City). 3-Determination the levels of Cd, Pb, Cu and zinc associated with air born. 4- Determination of toxic gases (CO, SO-2 and NO-x) emitted from the chimneys. The results showed that the quantity of dust fall was varied obviously inside the factory and the regions affected by air pollutions. The monthly concentration of dust fall were 165, 27 and 10 tons/Km 2 /month inside the factory , affected villages and Baironi Hospital respectively, Wherein the permissible limit is (9tons/Km'2/month). The total suspended particulates (TSP) and inhalable particulates PM-1-0 & PM-3 in the studies area were higher than the permissible limit. The TSP concentrations inside the factory ranged between 497 and 2021 microgram/m'3 while the ranged between 328 and 561 microgram /m'3 in the surrounded villages and between 232 and 244 microgram/m'3 near Damascus, the were far higher than the world health organization (WHO) standards (120 Microgram/m'3). The PM-3 which is the most effecting on the human health reached 117.6, 124.6 and 62.6 microgram /m 3 inside the factory (main in trance), city worker of Adra and Baironi Hospital respectively, theses concentrations were higher than the Syrian standards (15 microgram/m'3) The measurements which were carried out through an exclusive day refered that the percentage of TSP/PM-3 is increasedwith moving away from the factory and reached 6.8, 18.6, 19.3% in the main intrance of the factory, worker city of Adra and Bironi Hospital respectively. The level of toxic gases inside the source (chimneys) was within the standards

Optimising the Target and Capture Sections of the Neutrino Factory

CERN Document Server

Hansen, Ole Martin; Stapnes, Steinar

The Neutrino Factory is designed to produce an intense high energy neutrino beam from stored muons. The majority of the muons are obtained from the decay of pions, produced by a proton beam impinging on a free-flowing mercury-jet target and captured by a high magnetic field. It is important to capture a large fraction of the produced pions to maximize the intensity of the neutrino beam. Various optimisation studies have been performed with the aim of maximising the muon influx to the accelerator and thus the neutrino beam intensity. The optimisation studies were performed with the use of Monte Carlo simulation tools. The production of secondary particles, by interactions between the incoming proton beam and the mercury target, was optimised by varying the proton beam impact position and impact angles on the target. The proton beam and target interaction region was studied and showed to be off the central axis of the capture section in the baseline configuration. The off-centred interaction region resulted in ...

Mixture component effects on the in vitro dermal absorption of pentachlorophenol

Energy Technology Data Exchange (ETDEWEB)

Riviere, J.E.; Qiao, G.; Baynes, R.E.; Brooks, J.D. [Coll. of Veterinary Medicine, North Carolina State Univ., Raleigh, NC (United States); Mumtaz, M. [Agency for Toxic Substances and Disease Registry (ATSDR), Atlanta, GA (United States)

2001-08-01

Interactions between chemicals in a mixture and interactions of mixture components with the skin can significantly alter the rate and extent of percutaneous absorption, as well as the cutaneous disposition of a topically applied chemical. The predictive ability of dermal absorption models, and consequently the dermal risk assessment process, would be greatly improved by the elucidation and characterization of these interactions. Pentachlorophenol (PCP), a compound known to penetrate the skin readily, was used as a marker compound to examine mixture component effects using in vitro porcine skin models. PCP was administered in ethanol or in a 40% ethanol/60% water mixture or a 40% ethanol/60% water mixture containing either the rubefacient methyl nicotinate (MNA) or the surfactant sodium lauryl sulfate (SLS), or both MNA and SLS. Experiments were also conducted with {sup 14}C-labelled 3,3',4,4'-tetrachlorobiphenyl (TCB) and 3,3',4,4',5-pentachlorobiphenyl (PCB). Maximal PCP absorption was 14.12% of the applied dose from the mixture containing SLS, MNA, ethanol and water. However, when PCP was administered in ethanol only, absorption was only 1.12% of the applied dose. There were also qualitative differences among the absorption profiles for the different PCP mixtures. In contrast with the PCP results, absorption of TCB or PCB was negligible in perfused porcine skin, with only 0.14% of the applied TCB dose and 0.05% of the applied PCB dose being maximally absorbed. The low absorption levels for the PCB congeners precluded the identification of mixture component effects. These results suggest that dermal absorption estimates from a single chemical exposure may not reflect absorption seen after exposure as a chemical mixture and that absorption of both TCB and PCB are minimal in this model system. (orig.)

Preparation of an Evaluated HACCP- Plan in Order to Implementation in Iranian Mineral Water Factories for Avoiding the Common Food Safety Hazards in Such Industries

Directory of Open Access Journals (Sweden)

Amin Kiyani

2014-12-01

Full Text Available Background: consumption of mineral waters in the world has increased in recent years, and also concerns of consumers about its contamination are growing. Thereby, implementation of such a protective system as HACCP can prevent contamination of waters by different agents. This research aimed to develop an HACCP-Plan standard for mineral waters manufacturing factories in Iran. Methods: In current study, like production lines, polyethylene terephthalate (PET containers packaging, warehouses and laboratories sections of factories were observed from view of production and quality control. To monitor, control and restrict the hazards, seven principles of HACCP were considered. In continue applicable solutions were presented inclusive and practically for all factories. Required information were verified and presented through investigation of national and international standards. Results: The results shown that lack of sanitizing mineral water supplies and factories environment, incomplete water treatment, non-standard production of PET bottles, improper storage of raw materials and final product, and lack of inspection of equipment led to the increasing health hazards of the product and endanger the consumers health. Conclusion: In order to produce safe mineral water, it is necessary to sanitize the water supplies and factory environment. In addition, the process of water treatment and the production of PET bottles must be according to national and international standards. As the implementation of the HACCP system in various mineral water producing factories is not same, application of developed system in this research will be effective to standardize the implementation of this system in plants.

The intense neutron generator and future factory type ion accelerators

Energy Technology Data Exchange (ETDEWEB)

Lewis, W B

1968-07-01

A neutron factory is likely to sell its product in the form of isotopes. To ay neutron factories are nuclear reactors. Ion accelerators may also produce isotopes by direct interaction and, at high enough energies, mesons and hyperons. The challenge of the electrical production of neutrons goes far beyond the isotope market. It challenges the two popular concepts for long term large scale energy, the fast breeder reactor and controlled thermonuclear fusion. For this use about 4% of nuclear generated power would be applied in a feedback loop generating extra neutrons. Competition rests on operating and processing costs. The Intense Neutron Generator proposal now cancelled would have been full scale for such a use, but much further advance in accelerator engineering is required and anticipated. Perhaps most promising is the application of the ion drag principle in which rings of fast electrons are accelerated along their axis dragging ions with them by electrostatic attraction. Due to the much larger mass of the ions they can acquire much higher energy than the electrons and the process could be efficient. Such accelerators have not yet been made but experimental and theoretical studies are promising. (author)

The intense neutron generator and future factory type ion accelerators

International Nuclear Information System (INIS)

Lewis, W.B.

1968-01-01

A neutron factory is likely to sell its product in the form of isotopes. To ay neutron factories are nuclear reactors. Ion accelerators may also produce isotopes by direct interaction and, at high enough energies, mesons and hyperons. The challenge of the electrical production of neutrons goes far beyond the isotope market. It challenges the two popular concepts for long term large scale energy, the fast breeder reactor and controlled thermonuclear fusion. For this use about 4% of nuclear generated power would be applied in a feedback loop generating extra neutrons. Competition rests on operating and processing costs. The Intense Neutron Generator proposal now cancelled would have been full scale for such a use, but much further advance in accelerator engineering is required and anticipated. Perhaps most promising is the application of the ion drag principle in which rings of fast electrons are accelerated along their axis dragging ions with them by electrostatic attraction. Due to the much larger mass of the ions they can acquire much higher energy than the electrons and the process could be efficient. Such accelerators have not yet been made but experimental and theoretical studies are promising. (author)

Operating a production pilot factory serving several scientific domains

Science.gov (United States)

Sfiligoi, I.; Würthwein, F.; Andrews, W.; Dost, J. M.; MacNeill, I.; McCrea, A.; Sheripon, E.; Murphy, C. W.

2011-12-01

Pilot infrastructures are becoming prominent players in the Grid environment. One of the major advantages is represented by the reduced effort required by the user communities (also known as Virtual Organizations or VOs) due to the outsourcing of the Grid interfacing services, i.e. the pilot factory, to Grid experts. One such pilot factory, based on the glideinWMS pilot infrastructure, is being operated by the Open Science Grid at University of California San Diego (UCSD). This pilot factory is serving multiple VOs from several scientific domains. Currently the three major clients are the analysis operations of the HEP experiment CMS, the community VO HCC, which serves mostly math, biology and computer science users, and the structural biology VO NEBioGrid. The UCSD glidein factory allows the served VOs to use Grid resources distributed over 150 sites in North and South America, in Europe, and in Asia. This paper presents the steps taken to create a production quality pilot factory, together with the challenges encountered along the road.

Operating a production pilot factory serving several scientific domains

International Nuclear Information System (INIS)

Sfiligoi, I; Würthwein, F; Andrews, W; Dost, J M; MacNeill, I; McCrea, A; Sheripon, E; Murphy, C W

2011-01-01

Pilot infrastructures are becoming prominent players in the Grid environment. One of the major advantages is represented by the reduced effort required by the user communities (also known as Virtual Organizations or VOs) due to the outsourcing of the Grid interfacing services, i.e. the pilot factory, to Grid experts. One such pilot factory, based on the glideinWMS pilot infrastructure, is being operated by the Open Science Grid at University of California San Diego (UCSD). This pilot factory is serving multiple VOs from several scientific domains. Currently the three major clients are the analysis operations of the HEP experiment CMS, the community VO HCC, which serves mostly math, biology and computer science users, and the structural biology VO NEBioGrid. The UCSD glidein factory allows the served VOs to use Grid resources distributed over 150 sites in North and South America, in Europe, and in Asia. This paper presents the steps taken to create a production quality pilot factory, together with the challenges encountered along the road.

Design, analysis and presentation of factorial randomised controlled trials

Directory of Open Access Journals (Sweden)

Little Paul

2003-11-01

Full Text Available Abstract Background The evaluation of more than one intervention in the same randomised controlled trial can be achieved using a parallel group design. However this requires increased sample size and can be inefficient, especially if there is also interest in considering combinations of the interventions. An alternative may be a factorial trial, where for two interventions participants are allocated to receive neither intervention, one or the other, or both. Factorial trials require special considerations, however, particularly at the design and analysis stages. Discussion Using a 2 × 2 factorial trial as an example, we present a number of issues that should be considered when planning a factorial trial. The main design issue is that of sample size. Factorial trials are most often powered to detect the main effects of interventions, since adequate power to detect plausible interactions requires greatly increased sample sizes. The main analytical issues relate to the investigation of main effects and the interaction between the interventions in appropriate regression models. Presentation of results should reflect the analytical strategy with an emphasis on the principal research questions. We also give an example of how baseline and follow-up data should be presented. Lastly, we discuss the implications of the design, analytical and presentational issues covered. Summary Difficulties in interpreting the results of factorial trials if an influential interaction is observed is the cost of the potential for efficient, simultaneous consideration of two or more interventions. Factorial trials can in principle be designed to have adequate power to detect realistic interactions, and in any case they are the only design that allows such effects to be investigated.

Hadronic atoms at a kaon factory

International Nuclear Information System (INIS)

Leon, M.

1982-01-01

Beyond doubt, the advent of a kaon factory will be of immense significance for the study of hadronic atoms. Here we will discuss some classes of experiments that certainly can and will be done at a kaon factory, as well as some very interesting possibilities which deserve investigation. Among the certains we include the observation of hadronic x rays from kaonic and μ - atoms, for both Z greater than one and for the isotopes of hydrogen, mainly for strong interaction information. More conjectural is the possibility of measuring Xi - and Ω - x rays

Occupational injuries and illnesses in rubber factory: Profile, Potential Hazards and possible prevention

Directory of Open Access Journals (Sweden)

Tri Hari Irfani

2015-12-01

Full Text Available Rubber is one of the important commodities in the world. Globally, workers are facing so many problems of hazards that produce by rubber process. In Indonesia, there are several data of occupational problems such as respiratory diseases, muscle and skeletal diseases, gastrointestinal diseases, diseases of the teeth and oral cavity, skin diseases and skin tissue. In Iranian rubber factory, Iran, workers had suffered from some kind of musculoskeletal symptoms. Stomach and liver cancers in workers are having in Shanghai tire factory. In addition, Germany has cancer problem of their workers who work in rubber factory. Most of the rubber process in the factory can cause some hazards of the workers. In unloading area and area that operator is taking the dirt manually, workers are facing ergonomic problems. The possible control is reduce weight of load, team lift the object with two or more workers and Use mechanical assist. Machine safeguarding is essential for protecting from Cutting process that can make workers amputation organs such as hands, and fingers. In bale process, the workers need to cut raw rubber into bale in bale cutting. Furthermore, workers are facing with amputation problem. To manage that, It must be designed as a standard which has interlocking guards to prevent access to the cutting area. When wrapped using plastic, workers use a heated iron and sticked in plastic so that it blends neatly. The risks are fingers can cut accidently and then the workers also get contamination from polyvinyl chloride (PVC. The possible preventions are use an automatic plastic wrapping machine with palletized product sitting on a turntable and respirator. Another problem is contact dermatitis that has been reported frequently among rubber workers. The prevention for that problem is using Gloves. The aim of researcher is to provide the profile of occupational injuries and illnesses, potential hazards in rubber factory to prevent the workers.

Russian factory inspection (1882-1918): cui bono?

OpenAIRE

Volodin , Andrei Y.

2008-01-01

This study deals with history of important state institution in late Russian Empire - factory inspection. Such aspects of institutional development as evolution of legislative regulations, growth of staff, and complication of functions (and particularly, mediation in labour conflicts) are scrutinized. This paper presents some results on Russian experience of labour law implementation seeking to determine and evaluate the role and efficiency of Russian factory inspectors in conflicting triangl...

Planned e+e- factories

International Nuclear Information System (INIS)

Le Duff, J.

1993-09-01

Various Beauty and Tau-Charm factories and projects are reviewed. Different machines (TRISTAN II, PEP II, CESR-B, the Dubna project and the European project) are compared and their design and parameters are described. (K.A.) 34 refs., 2 figs., 2 tabs

The Physics of the B Factories

International Nuclear Information System (INIS)

Bevan, A.J.; Golob, B.; Mannel, T.

2014-01-01

The inspiration for this book came from Fran@cois le Diberder. During his term as spokesperson for BABAR he laid down a vision for the two B Factory detector collaborations, BABAR and Belle, to work together on a book that would describe the methodologies used and physics results obtained by those experiments. A key ideal emphasized from the outset was that this book should be written from a pedagogical perspective; it should be of interest to the student and expert alike. This vision was presented during a BABAR collaboration meeting on the island of Elba in May 2008 and a follow up Belle collaboration meeting at KEK, with visiting colleagues from the BABAR collaboration, and was embraced by the community. A number of workshops involving people from the theoretical community as well as the two collaborations were held on four continents over the following years. The resulting book, ''The Physics of the B Factories'', is a testament to the way that this concept captured the zeitgeist on both sides of the Pacific Ocean. This book is divided into three parts, the first of which provides a brief description of the B Factories, including a short (though not exhaustive) historical perspective, as well as descriptions of the detectors, ancillary data acquisition systems and data (re)processing systems that were built by the two detector collaborations in the late 1990's. The second part of the book discusses tools and methods that are frequently used when analyzing the data collected. These range from details of low level reconstruction algorithms and abstract summaries of statistical methods to high level prescriptions used when evaluating systematic uncertainties on measurements of observables. The third part of the book is devoted to physics results. This includes sufficient theoretical discussion in order for the reader to understand the context of the work being described. We are indebted to our colleagues from the theoretical community who have helped us achieve

Residues leaching from 'Factory of barren ores'

International Nuclear Information System (INIS)

Rakhmatov, N.; Khakimov, N.; Nazarov, Kh.M.; Barotov, A.M.

2012-01-01

The objective of the present work is safe management of residues from Factory of Barren Ores, their reprocessing, expenditures reduction for remediation of Istiklol city former uranium tailings. For this purpose, some experiences were adopted - Factory of Barren Ores tailing use for filling up the open pit where water with uranium content 3-5 mg/l is located. Factory of Barren Ores waste are passed through heap leaching and have some amount of uranium salts dissolved in water. Thus, we propose to dissolve uranium from Factory of Barren Ores wastes with uranium bearing water flowing out from gallery and filling up the open-pit by radioactive wastes. In so doing, uranium content flowing out from gallery will increase twice, and further, passing them through apricot's shell, as a sorbent, we will clean the water against radionuclides. Residue samples with uranium content 0,015% from Factory of Barren Ores and uranium bearing waters from gallery 1 with uranium content 0,0025 g/l were used for laboratory tests. After which, a slurry was prepared by means of residue mixing with water in ratio of solid and liquid phases (S:L) - 1:2 and 9,7 ml of sulfuric acid (Ρ=1,82) was added which corresponds consumption by H 2 SO 4 176,54 kg/t. For the first test, leaching was carried out during 4 hours at ph=1,6 at room temperature. For the second test, leaching was carried out at 60 d eg C a nd ph=1,6 during 4 hours. Slurry heating and mixing was carried out by means of magnetic mixer. The basic residue leaching indicators are provided in this article.

Engineering Robustness of Microbial Cell Factories.

Science.gov (United States)

Gong, Zhiwei; Nielsen, Jens; Zhou, Yongjin J

2017-10-01

Metabolic engineering and synthetic biology offer great prospects in developing microbial cell factories capable of converting renewable feedstocks into fuels, chemicals, food ingredients, and pharmaceuticals. However, prohibitively low production rate and mass concentration remain the major hurdles in industrial processes even though the biosynthetic pathways are comprehensively optimized. These limitations are caused by a variety of factors unamenable for host cell survival, such as harsh industrial conditions, fermentation inhibitors from biomass hydrolysates, and toxic compounds including metabolic intermediates and valuable target products. Therefore, engineered microbes with robust phenotypes is essential for achieving higher yield and productivity. In this review, the recent advances in engineering robustness and tolerance of cell factories is described to cope with these issues and briefly introduce novel strategies with great potential to enhance the robustness of cell factories, including metabolic pathway balancing, transporter engineering, and adaptive laboratory evolution. This review also highlights the integration of advanced systems and synthetic biology principles toward engineering the harmony of overall cell function, more than the specific pathways or enzymes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

SYSTEMS BIOLOGY AND METABOLIC ENGINEERING OF ARTHROSPIRA CELL FACTORIES

Directory of Open Access Journals (Sweden)

Amornpan Klanchui

2012-10-01

Full Text Available Arthrospira are attractive candidates to serve as cell factories for production of many valuable compounds useful for food, feed, fuel and pharmaceutical industries. In connection with the development of sustainable bioprocessing, it is a challenge to design and develop efficient Arthrospira cell factories which can certify effective conversion from the raw materials (i.e. CO2 and sun light into desired products. With the current availability of the genome sequences and metabolic models of Arthrospira, the development of Arthrospira factories can now be accelerated by means of systems biology and the metabolic engineering approach. Here, we review recent research involving the use of Arthrospira cell factories for industrial applications, as well as the exploitation of systems biology and the metabolic engineering approach for studying Arthrospira. The current status of genomics and proteomics through the development of the genome-scale metabolic model of Arthrospira, as well as the use of mathematical modeling to simulate the phenotypes resulting from the different metabolic engineering strategies are discussed. At the end, the perspective and future direction on Arthrospira cell factories for industrial biotechnology are presented.

Engineering microbial chemical factories to produce renewable "biomonomers".

Science.gov (United States)

Adkins, Jake; Pugh, Shawn; McKenna, Rebekah; Nielsen, David R

2012-01-01

By applying metabolic engineering tools and strategies to engineer synthetic enzyme pathways, the number and diversity of commodity and specialty chemicals that can be derived directly from renewable feedstocks is rapidly and continually expanding. This of course includes a number of monomer building-block chemicals that can be used to produce replacements to many conventional plastic materials. This review aims to highlight numerous recent and important advancements in the microbial production of these so-called "biomonomers." Relative to naturally-occurring renewable bioplastics, biomonomers offer several important advantages, including improved control over the final polymer structure and purity, the ability to synthesize non-natural copolymers, and allowing products to be excreted from cells which ultimately streamlines downstream recovery and purification. To highlight these features, a handful of biomonomers have been selected as illustrative examples of recent works, including polyamide monomers, styrenic vinyls, hydroxyacids, and diols. Where appropriate, examples of their industrial penetration to date and end-product uses are also highlighted. Novel biomonomers such as these are ultimately paving the way toward new classes of renewable bioplastics that possess a broader diversity of properties than ever before possible.

Proceedings of the 2-nd workshop on JINR tau-charm factory

International Nuclear Information System (INIS)

Aleksandrov, V.S.; Perel'shtejn, E.A.

1993-01-01

Application of tau-charm factory for investigation of hadronic decay and charged leptonic weak interaction is considered. JINR tau-charm-factory design and magnetic and vacuum systems of the booster ring are described. New types of silicon microstrip detector sand BGO-counters developed for tau-charm-factory are proposed

Performance of the biogas project in Ziyang sugar factory

Energy Technology Data Exchange (ETDEWEB)

Dezhao He [Chengdu Biogas Research Inst., Chengdu (China)

2000-07-01

Located in Houjiaping town, Ziyang county, Ziyang Sugar Factory was installed in 1958 as a state enterprise, which mainly processes sugar cane to produce sugar. Sideline products include alcohol and paper. Nowadays, its daily capacity of sugar cane extraction is 1,000 tons and potable alcohol production is 15 - 20 tons. Its annual output value is 25 million Yuan. This plant is one of the backbones in Sichuan sugar cane processing enterprises. The biogas project of the Ziyang Sugar Factory was one of the large biogas installations in China, completed during the Seventh Five-year Plan. The distillery wastewater (slops) from the alcoholic fermentation process of starch (fresh potato, dry potato, kernel and Chinese sorghum) and sugar molasses as substrates is disposed of. The slop has a low pH, a high organic concentration, a high content of suspended solids, a dark colour and a high temperature. Its daily discharge quantity is 200 tons corresponding to 2/3 of total wastewater in that plant. It is a serious source of water pollution when it is directly discharged into Tuojiang River. Therefore, due to its high concentration of polluting substances, anaerobic treatment of distillery wastewater has been decided. This is the first case of wastewater treatment in Nudging city. The construction of this biogas installation started in July 1987. On November 25, 1988, the digester began to produce biogas. Up to now, the digesters have properly operated for more than one year. Besides its use as daily household fuel for the 810 employees, biogas is also supplied to the plant cafeteria as cooking fuel and to some production purposes within the plant, which has achieved obvious economic benefits. The designed capacity of daily biogas production for this biogas plant is 3,000 - 4,000 m{sup 3}. (orig.)

Factorial Analysis of Profitability

OpenAIRE

Georgeta VINTILA; Ilie GHEORGHE; Ioana Mihaela POCAN; Madalina Gabriela ANGHEL

2012-01-01

The DuPont analysis system is based on decomposing the profitability ratio in factors of influence. This paper describes the factorial analysis of profitability based on the DuPont system. Significant importance is given to the impact on various indicators on the shares value and profitability.

Nuclear physics at the KAON factory

International Nuclear Information System (INIS)

Kitching, R.

1989-05-01

The author surveys the range of nuclear physics issues which can be addressed with a high intensity hadron facility such as the KAON factory. He discusses hadron spectroscopy, kaon scattering, hypernuclear physics, spin physics, and nuclear physics with neutrinos. Nuclear Physics is defined rather broadly, encompassing the study of strongly interacting systems, and including the structure of individual hadrons, hadron-hadron interactions, hadronic weak and electromagnetic currents (in nuclei too), conventional nuclear structure, and exotic nuclei. The basic theme is how the KAON Factory can shed light on non-perturbative QCD and its relation to conventional nuclear physics

Phenomenology of neutrino oscillations at the neutrino factory

International Nuclear Information System (INIS)

Tang, Jian

2011-01-01

We consider the prospects for a neutrino factory measuring mixing angles, the CP violating phase and mass-squared differences by detecting wrong-charge muons arising from the chain μ + → ν e → ν μ → μ - and the right-charge muons coming from the chain μ + → anti ν μ → anti ν μ → μ - (similar to μ - chains), where ν e → ν μ and anti ν μ → anti ν μ are neutrino oscillation channels through a long baseline. First, we study physics with near detectors and consider the treatment of systematic errors including cross section errors, flux errors, and background uncertainties. We illustrate for which measurements near detectors are required, discuss how many are needed, and what the role of the flux monitoring is. We demonstrate that near detectors are mandatory for the leading atmospheric parameter measurements if the neutrino factory has only one baseline, whereas systematic errors partially cancel if the neutrino factory complex includes the magic baseline. Second, we perform the baseline and energy optimization of the neutrino factory including the latest simulation results from the magnetized iron neutrino detector (MIND). We also consider the impact of τ decays, generated by appearance channels ν μ → ν τ and ν e → ν τ , on the discovery reaches of the mass orderings, the leptonic CP violation, and the non-zero θ 13 , which we find to be negligible for the considered detector. Third, we make a comparison of a high energy neutrino factory to a low energy neutrino factory and find that they are just two versions of the same experiment optimized for different regions of the parameter space. In addition, we briefly comment on whether it is useful to build the bi-magic baseline at the low energy neutrino factory. Finally, the effects of one additional massive sterile neutrino are discussed in the context of a combined short and long baseline setup. It is found that near detectors can provide the required sensitivity at the

Hazardous factories: Nigerian evidence.

Science.gov (United States)

Oloyede, Olajide

2005-06-01

The past 15 years have seen an increasing governmental and corporate concern for the environment worldwide. For governments, information about the environmental performance of the industrial sector is required to inform macro-level decisions about environmental targets such as those required to meet UN directives. However, in many African, Asian, and Latin American countries, researching and reporting company environmental performance is limited. This article serves as a contribution to filling the gap by presenting evidence of physical and chemical risk in Nigerian factories. One hundred and three factories with a total of 5,021 workers were studied. One hundred and twenty physical and chemical hazards were identified and the result shows a high number of workers exposed to such hazards. The study also reveals that workers' awareness level of chemical hazards was high. Yet the danger was perceived in behavioral terms, especially by manufacturing firms, which tend to see environmental investment in an increasingly global economy as detrimental to profitability.

The impact of alkali metal halide electron donor complexes in the photocatalytic degradation of pentachlorophenol

Energy Technology Data Exchange (ETDEWEB)

Khuzwayo, Z., E-mail: zack.khuzwayo@up.ac.za; Chirwa, E.M.N

2017-01-05

Highlights: • Facilitation of photocatalysis using simple metal-halides as VB hole scavengers. • Recombination prevention by coupled valence and conduction band approaches. • Determination of anions critical levels beyond which process retardation occurs. • Determination of the photocatalytic process rate of reaction kinetics. - Abstract: The performance of photocatalytic oxidation of chemical pollutants is subjected to the presence of anion complexes in natural waters. This study investigated the influence of alkali metal (Na{sup +} (sodium), K{sup +} (potassium)) halides (Cl{sup −} (chloride), Br{sup −} (bromide), F{sup −} (fluoride)) as inorganic ion sources in the photocatalytic degradation of pentachlorophenol (PCP) in batch systems. It was found that the exclusive presence of halides in the absence of an electron acceptor adequately facilitated the photocatalyst process below critical levels of anion populations, where beyond the critical point the process was significantly hindered. Below the determined critical point, the performance in some cases near matches that of the facilitation of the photocatalytic process by exclusive oxygen, acting as an electron scavenger. The coupling of halide ions and oxygenation presented significantly improved photo-oxidation of PCP, this was confirmed by the inclusion of formic acid as a comparative electron donor. The Langmuir-Hinshelwood kinetic expression was used to calculate the performance rate kinetics. The probable impact of the halide anions was discussed with regards to the process of electron hole pair recombination prevention.

Comparison Between Dielectric Barrier Discharge Plasma and Ozone Regenerations of Activated Carbon Exhausted with Pentachlorophenol

Science.gov (United States)

Qu, Guangzhou; Liang, Dongli; Qu, Dong; Huang, Yimei; Li, Jie

2014-06-01

In this study, two regeneration methods (dielectric barrier discharge (DBD) plasma and ozone (O3) regeneration) of saturated granular activated carbon (GAC) with pentachlorophenol (PCP) were compared. The results show that the two regeneration methods can eliminate contaminants from GAC and recover its adsorption properties to some extent. Comparing the DBD plasma with O3 regeneration, the adsorption rate and the capacity of the GAC samples after DBD plasma regeneration are greater than those after O3 regeneration. O3 regeneration decreases the specific surface area of GAC and increases the acidic surface oxygen groups on the surface of GAC, which causes a decrease in PCP on GAC uptake. With increasing regeneration cycles, the regeneration efficiencies of the two methods decrease, but the decrease in the regeneration efficiencies of GAC after O3 regeneration is very obvious compared with that after DBD plasma regeneration. Furthermore, the equilibrium data were fitted by the Freundlich and Langmuir models using the non-linear regression technique, and all the adsorption equilibrium isotherms fit the Langmuir model fairly well, which demonstrates that the DBD plasma and ozone regeneration processes do not appear to modify the adsorption process, but to shift the equilibrium towards lower adsorption concentrations. Analyses of the weight loss of GAC show that O3 regeneration has a lower weight loss than DBD plasma regeneration.

Degradation of pentachlorophenol by the white rot fungus Phanerochaete chrysosporium grown in ammonium lignosulphonate media.

Science.gov (United States)

Aiken, B S; Logan, B E

1996-06-01

Removal and degradation of pentachlorophenol (PCP) by Phanerochaete chrysosporium in static flask cultures was studied using ammonium lignosulphonates (LS), a waste product of the papermill industry, as a carbon and nitrogen source. After 3 days, cultures of P. chrysosporium grown in either a 2% LS (nitrogen-sufficient) medium or a 0.23% LS and 2% glucose (nitrogen-deficient) medium removed 72 to 75% of PCP, slightly less than the 95% removal seen using nitrogen-deficient glucose and ammonia medium. PCP dehalogenation occurred despite the fact that extracellular enzyme (LiP) activity, measured by a veratryl alcohol oxidation assay and by PCP disappearance in cell-free extracts, was inhibited by LS. This inactivation of LiP likely contributed to the lower percent of PCP dehalogenation observed using the LS media. In order to better understand the relationship between PCP disappearance and dehalogenation, we measured the fate of the chlorine in PCP. After 13 days, only 1.8% of the initial PCP added was recoverable as PCP. The remainder of the PCP was either mineralized or transformed to breakdown intermediates collectively identified as organic halides. The largest fraction of the original chlorine (58%) was recovered as organic (non-PCP) halide, most of which (73%) was associated with the cell mass. Of the remaining chlorine, 40% was released as chloride ion, indicating a level of dehalogenation in agreement with previously reported values.

Comparison Between Dielectric Barrier Discharge Plasma and Ozone Regenerations of Activated Carbon Exhausted with Pentachlorophenol

International Nuclear Information System (INIS)

Qu Guangzhou; Liang Dongli; Qu Dong; Huang Yimei; Li Jie

2014-01-01

In this study, two regeneration methods (dielectric barrier discharge (DBD) plasma and ozone (O 3 ) regeneration) of saturated granular activated carbon (GAC) with pentachlorophenol (PCP) were compared. The results show that the two regeneration methods can eliminate contaminants from GAC and recover its adsorption properties to some extent. Comparing the DBD plasma with O 3 regeneration, the adsorption rate and the capacity of the GAC samples after DBD plasma regeneration are greater than those after O 3 regeneration. O 3 regeneration decreases the specific surface area of GAC and increases the acidic surface oxygen groups on the surface of GAC, which causes a decrease in PCP on GAC uptake. With increasing regeneration cycles, the regeneration efficiencies of the two methods decrease, but the decrease in the regeneration efficiencies of GAC after O 3 regeneration is very obvious compared with that after DBD plasma regeneration. Furthermore, the equilibrium data were fitted by the Freundlich and Langmuir models using the non-linear regression technique, and all the adsorption equilibrium isotherms fit the Langmuir model fairly well, which demonstrates that the DBD plasma and ozone regeneration processes do not appear to modify the adsorption process, but to shift the equilibrium towards lower adsorption concentrations. Analyses of the weight loss of GAC show that O 3 regeneration has a lower weight loss than DBD plasma regeneration

Investigation of cadmium pollution in the spruce saplings near the metal production factory.

Science.gov (United States)

Hashemi, Seyed Armin; Farajpour, Ghasem

2016-02-01

Toxic metals such as lead and cadmium are among the pollutants that are created by the metal production factories and disseminated in the nature. In order to study the quantity of cadmium pollution in the environment of the metal production factories, 50 saplings of the spruce species at the peripheries of the metal production factories were examined and the samples of the leaves, roots, and stems of saplings planted around the factory and the soil of the environment of the factory were studied to investigate pollution with cadmium. They were compared to the soil and saplings of the spruce trees planted outside the factory as observer region. The results showed that the quantity of pollution in the leaves, stems, and roots of the trees planted inside the factory environment were estimated at 1.1, 1.5, and 2.5 mg/kg, respectively, and this indicated a significant difference with the observer region (p metal production factory was estimated at 6.8 mg/kg in the depth of 0-10 cm beneath the level of the soil. The length of roots in the saplings planted around the factory of metal production stood at 11 and 14.5 cm in the observer region which had a significant difference with the observer region (p production processes in the factory. © The Author(s) 2013.

A biophysical model for transcription factories

International Nuclear Information System (INIS)

Canals-Hamann, Ana Z; Neves, Ricardo Pires das; Reittie, Joyce E; Iñiguez, Carlos; Soneji, Shamit; Enver, Tariq; Buckle, Veronica J; Iborra, Francisco J

2013-01-01

Transcription factories are nuclear domains where gene transcription takes place although the molecular basis for their formation and maintenance are unknown. In this study, we explored how the properties of chromatin as a polymer may contribute to the structure of transcription factories. We found that transcriptional active chromatin contains modifications like histone H4 acetylated at Lysine 16 (H4K16ac). Single fibre analysis showed that this modification spans the entire body of the gene. Furthermore, H4K16ac genes cluster in regions up to 500 Kb alternating active and inactive chromatin. The introduction of H4K16ac in chromatin induces stiffness in the chromatin fibre. The result of this change in flexibility is that chromatin could behave like a multi-block copolymer with repetitions of stiff-flexible (active-inactive chromatin) components. Copolymers with such structure self-organize through spontaneous phase separation into microdomains. Consistent with such model H4K16ac chromatin form foci that associates with nascent transcripts. We propose that transcription factories are the result of the spontaneous concentration of H4K16ac chromatin that are in proximity, mainly in cis

Silica aerogel Cherenkov counter for the KEK B-factory experiment

CERN Document Server

Sumiyoshi, T; Enomoto, R; Iijima, T; Suda, R; Leonidopoulos, C; Marlow, D R; Prebys, E; Kawabata, R; Kawai, H; Ooba, T; Nanao, M; Suzuki, K; Ogawa, S; Murakami, A; Khan, M H R

1999-01-01

Low-refractive-index silica aerogel is a convenient radiator for threshold-type Cherenkov counters, which are used for particle identification in high-energy physics experiments. For the BELLE detector at the KEK B-Factory we have produced about 2 m sup 3 of hydrophobic silica aerogels of n=1.01-1.03 using a new production method. The particle identification capability of the aerogel Cherenkov counters was tested and 3 sigma pion/proton separation has been achieved at 3.5 GeV/c. Radiation hardness of the aerogels was confirmed up to 9.8 Mrad. The Aerogel Cherenkov counter system (ACC) was successfully installed in the BELLE just before this conference.

Neutrinos: from the Workshop to the Factory

CERN Multimedia

2001-01-01

Over the next 5 years much work will be done to reach a theoretical and practical description of a neutrino factory. How could this project turn out to be an interesting future option for CERN? Neutrino beams travelling from CERN to the Canary Islands? And to the Svalbard archipelago in Norway? Or even to the Pyhaesalmi Mine in Finland? Why neutrinos? And why so far? The answers provide one of CERN's next challenging options: the construction of a high-energy muon storage ring to provide neutrino beams. This project, nicknamed 'neutrino factory', now figures in CERN's middle term plan as a recognized and supported research and development project. International collaborations, with other European laboratories and also with America and Japan, are now being set up. Long baseline locations for neutrino oscillations studies at a CERN based neutrino factory. Early in its history, LEP established that there exist just three kinds of light neutrinos, those associated with the electron, muon, and tau leptons. For a...

Managing the Microbial Ecology of a Cyanobacteria-Based Photosynthetic Factory Direct!, Final Report for EE0006100

Energy Technology Data Exchange (ETDEWEB)

Rittmann, Bruce [Arizona State Univ., Tempe, AZ (United States); Krajmalnik‐Brown, Rosa [Arizona State Univ., Tempe, AZ (United States); Zevin, Alexander [Arizona State Univ., Tempe, AZ (United States); Nguyen, Binh [Arizona State Univ., Tempe, AZ (United States); Patel, Megha [Arizona State Univ., Tempe, AZ (United States)

2015-02-28

The grandest challenge facing human society today is providing large amounts of energy and industrial chemicals that are renewable and carbon-neutral. An outstanding opportunity lies in employing photosynthetic microorganisms, which have the potential to generate energy and chemical feedstock from sunlight and CO₂ at rates 10 to 100 times greater than plants. Major challenges for solar-powered production using photosynthetic microorganisms are associated with the harvesting and downstream processing of biomass to yield the usable energy or material feedstock e.g. The technical challenges and costs of downstream processing could be avoided if, powered by solar energy, the photosynthetic microorganisms were to convert CO₂ directly to the desired product, which they release for direct harvesting. This approach creates a true photosynthetic factory, our goal for Photosynthetic Factory Direct! Our team is able to genetically modify the cyanobacterium Synechocystis sp. PCC 6803 so that it produces and excretes a range of renewable energy and chemical products directly from CO₂ and sunlight. Essential to realizing the potential of the photosynthetic factory is an engineered Advanced Photobioreactor (APBR) for reliable synthesis and harvest of the products.

The NuMAX Long Baseline Neutrino Factory Concept

Energy Technology Data Exchange (ETDEWEB)

Delahaye, J-P. [SLAC; Ankenbrandt, C. [MUONS Inc., Batavia; Bogacz, A. [Jefferson Lab; Huber, P. [Virginia Tech.; Kirk, H. [Brookhaven; Neuffer, D. [Fermilab; Palmer, M. A. [Fermilab; Ryne, R. [LBL, Berkeley; Snopok, P. [IIT, Chicago

2018-03-19

A Neutrino Factory where neutrinos of all species are produced in equal quantities by muon decay is described as a facility at the intensity frontier for exquisite precision providing ideal conditions for ultimate neutrino studies and the ideal complement to Long Baseline Facilities like LBNF at Fermilab. It is foreseen to be built in stages with progressively increasing complexity and performance, taking advantage of existing or proposed facilities at an existing laboratory like Fermilab. A tentative layout based on a recirculating linac providing opportunities for considerable saving is discussed as well as its possible evolution toward a muon collider if and when requested by Physics. Tentative parameters of the various stages are presented as well as the necessary R&D to address the technological issues and demonstrate their feasibility.

The Physics of the B Factories

Energy Technology Data Exchange (ETDEWEB)

Bevan, A.J. [Queen Mary Univ., London (United Kingdom); Golob, B. [Ljubljana Univ. (Slovenia). Faculty of Mathematics and Physics; J. Stefan Institute, Ljubljana (Slovenia); Mannel, T. [Siegen Univ. (Germany). Theoretische Physik 1; Collaboration: BABAR Collaboration; Belle Collaboration; and others

2014-11-15

The inspiration for this book came from Fran@cois le Diberder. During his term as spokesperson for BABAR he laid down a vision for the two B Factory detector collaborations, BABAR and Belle, to work together on a book that would describe the methodologies used and physics results obtained by those experiments. A key ideal emphasized from the outset was that this book should be written from a pedagogical perspective; it should be of interest to the student and expert alike. This vision was presented during a BABAR collaboration meeting on the island of Elba in May 2008 and a follow up Belle collaboration meeting at KEK, with visiting colleagues from the BABAR collaboration, and was embraced by the community. A number of workshops involving people from the theoretical community as well as the two collaborations were held on four continents over the following years. The resulting book, ''The Physics of the B Factories'', is a testament to the way that this concept captured the zeitgeist on both sides of the Pacific Ocean. This book is divided into three parts, the first of which provides a brief description of the B Factories, including a short (though not exhaustive) historical perspective, as well as descriptions of the detectors, ancillary data acquisition systems and data (re)processing systems that were built by the two detector collaborations in the late 1990's. The second part of the book discusses tools and methods that are frequently used when analyzing the data collected. These range from details of low level reconstruction algorithms and abstract summaries of statistical methods to high level prescriptions used when evaluating systematic uncertainties on measurements of observables. The third part of the book is devoted to physics results. This includes sufficient theoretical discussion in order for the reader to understand the context of the work being described. We are indebted to our colleagues from the theoretical community who

Hospitals as factories of medical garbage.

Science.gov (United States)

Hodges, Sarah

2017-12-01

Over the course of the twentieth century, as hospitals cleaned up, they came to produce more and more rubbish. Beginning in the 1970s and gaining pace in the 1980s and 1990s, single-use plastic items (syringes, blood bags, tubing) saturated everyday medical practice across the globe. This essay brings the question of plastic to bear upon the longer history of twentieth century sanitary science. The widespread adoption of single-use disposable medical plastics consolidated a century's worth of changes in medical hygiene. As strange as it may seem today, the initial uptake of medical plastics was not driven primarily by concerns about hygiene. Plastic began as a mid-century technology of convenience and durability. It was not until the end of the twentieth century that it morphed into a powerful symbol and instrument of medical hygiene. Today, both patients and practitioners have embraced plastic as an indispensable technology of clean medicine. The procession of single-use medical plastics through everyday medicine now comprises a constant, if disposable, infrastructure of medical hygiene. This new processional infrastructure of disposable hygiene has produced another, albeit unintended, consequence. This new regime has exponentially increased hospitals' material outputs. In so doing, plastic has refigured the ecologies of everyday medicine. Plastic hygiene has rendered hospitals factories of medical garbage.

Pentachlorophenol exposure causes Warburg-like effects in zebrafish embryos at gastrulation stage

International Nuclear Information System (INIS)

Xu, Ting; Zhao, Jing; Hu, Ping; Dong, Zhangji; Li, Jingyun; Zhang, Hongchang; Yin, Daqiang; Zhao, Qingshun

2014-01-01

Pentachlorophenol (PCP) is a prevalent pollutant in the environment and has been demonstrated to be a serious toxicant to humans and animals. However, little is known regarding the molecular mechanism underlying its toxic effects on vertebrate early development. To explore the impacts and underlying mechanisms of PCP on early development, zebrafish (Danio rerio) embryos were exposed to PCP at concentrations of 0, 20 and 50 μg/L, and microscopic observation and cDNA microarray analysis were subsequently conducted at gastrulation stage. The morphological observations revealed that PCP caused a developmental delay of zebrafish embryos in a concentration-dependent manner. Transcriptomic data showed that 50 μg/L PCP treatment resulted in significant changes in gene expression level, and the genes involved in energy metabolism and cell behavior were identified based on gene functional enrichment analysis. The energy production of embryos was influenced by PCP via the activation of glycolysis along with the inhibition of oxidative phosphorylation (OXPHOS). The results suggested that PCP acts as an inhibitor of OXPHOS at 8 hpf (hours postfertilization). Consistent with the activated glycolysis, the cell cycle activity of PCP-treated embryos was higher than the controls. These characteristics are similar to the Warburg effect, which occurs in human tumors. The microinjection of exogenous ATP confirmed that an additional energy supply could rescue PCP-treated embryos from the developmental delay due to the energy deficit. Taken together, our results demonstrated that PCP causes a Warburg-like effect on zebrafish embryos during gastrulation, and the affected embryos had the phenotype of developmental delay. - Highlights: • We treat zebrafish embryos with PCP at gastrula stage. • PCP acts as an oxidative phosphorylation inhibitor, not an uncoupler, in gastrulation. • Exogenous ATP injection will rescue the development of effected embryos. • The transcriptome of PCP

Pentachlorophenol exposure causes Warburg-like effects in zebrafish embryos at gastrulation stage

Energy Technology Data Exchange (ETDEWEB)

Xu, Ting; Zhao, Jing [Key Laboratory of Yangtze River Water Environment, Ministry of Education, College of Environmental Science and Technology, Tongji University, Shanghai 200092 (China); Hu, Ping [Key Laboratory of Model Animal for Disease Study, Ministry of Education, Model Animal Research Center, Nanjing University, Nanjing 210061 (China); State Key Laboratory of Reproductive Medicine, Department of Prenatal Diagnosis, Nanjing Maternity and Child Health Care Hospital Affiliated to Nanjing Medical University, Nanjing 210029 (China); Dong, Zhangji; Li, Jingyun [Key Laboratory of Model Animal for Disease Study, Ministry of Education, Model Animal Research Center, Nanjing University, Nanjing 210061 (China); Zhang, Hongchang [Key Laboratory of Yangtze River Water Environment, Ministry of Education, College of Environmental Science and Technology, Tongji University, Shanghai 200092 (China); Yin, Daqiang, E-mail: yindq@tongji.edu.cn [Key Laboratory of Yangtze River Water Environment, Ministry of Education, College of Environmental Science and Technology, Tongji University, Shanghai 200092 (China); Zhao, Qingshun, E-mail: qingshun@nju.edu.cn [Key Laboratory of Model Animal for Disease Study, Ministry of Education, Model Animal Research Center, Nanjing University, Nanjing 210061 (China)

2014-06-01

Pentachlorophenol (PCP) is a prevalent pollutant in the environment and has been demonstrated to be a serious toxicant to humans and animals. However, little is known regarding the molecular mechanism underlying its toxic effects on vertebrate early development. To explore the impacts and underlying mechanisms of PCP on early development, zebrafish (Danio rerio) embryos were exposed to PCP at concentrations of 0, 20 and 50 μg/L, and microscopic observation and cDNA microarray analysis were subsequently conducted at gastrulation stage. The morphological observations revealed that PCP caused a developmental delay of zebrafish embryos in a concentration-dependent manner. Transcriptomic data showed that 50 μg/L PCP treatment resulted in significant changes in gene expression level, and the genes involved in energy metabolism and cell behavior were identified based on gene functional enrichment analysis. The energy production of embryos was influenced by PCP via the activation of glycolysis along with the inhibition of oxidative phosphorylation (OXPHOS). The results suggested that PCP acts as an inhibitor of OXPHOS at 8 hpf (hours postfertilization). Consistent with the activated glycolysis, the cell cycle activity of PCP-treated embryos was higher than the controls. These characteristics are similar to the Warburg effect, which occurs in human tumors. The microinjection of exogenous ATP confirmed that an additional energy supply could rescue PCP-treated embryos from the developmental delay due to the energy deficit. Taken together, our results demonstrated that PCP causes a Warburg-like effect on zebrafish embryos during gastrulation, and the affected embryos had the phenotype of developmental delay. - Highlights: • We treat zebrafish embryos with PCP at gastrula stage. • PCP acts as an oxidative phosphorylation inhibitor, not an uncoupler, in gastrulation. • Exogenous ATP injection will rescue the development of effected embryos. • The transcriptome of PCP

Phenomenology of neutrino oscillations at the neutrino factory

Energy Technology Data Exchange (ETDEWEB)

Tang, Jian

2011-12-19

We consider the prospects for a neutrino factory measuring mixing angles, the CP violating phase and mass-squared differences by detecting wrong-charge muons arising from the chain {mu}{sup +} {yields} {nu}{sub e} {yields} {nu}{sub {mu}} {yields} {mu}{sup -} and the right-charge muons coming from the chain {mu}{sup +} {yields} anti {nu}{sub {mu}} {yields} anti {nu}{sub {mu}} {yields} {mu}{sup -} (similar to {mu}{sup -} chains), where {nu}{sub e} {yields} {nu}{sub {mu}} and anti {nu}{sub {mu}} {yields} anti {nu}{sub {mu}} are neutrino oscillation channels through a long baseline. First, we study physics with near detectors and consider the treatment of systematic errors including cross section errors, flux errors, and background uncertainties. We illustrate for which measurements near detectors are required, discuss how many are needed, and what the role of the flux monitoring is. We demonstrate that near detectors are mandatory for the leading atmospheric parameter measurements if the neutrino factory has only one baseline, whereas systematic errors partially cancel if the neutrino factory complex includes the magic baseline. Second, we perform the baseline and energy optimization of the neutrino factory including the latest simulation results from the magnetized iron neutrino detector (MIND). We also consider the impact of {tau} decays, generated by appearance channels {nu}{sub {mu}} {yields} {nu}{sub {tau}} and {nu}{sub e} {yields} {nu}{sub {tau}}, on the discovery reaches of the mass orderings, the leptonic CP violation, and the non-zero {theta}{sub 13}, which we find to be negligible for the considered detector. Third, we make a comparison of a high energy neutrino factory to a low energy neutrino factory and find that they are just two versions of the same experiment optimized for different regions of the parameter space. In addition, we briefly comment on whether it is useful to build the bi-magic baseline at the low energy neutrino factory. Finally, the

SAFETY OF LIFE ACTIVITY AND ECOLOGICAL COMPATIBILITY IN THE GROCERY DEPARTMENT OF A BEET-SUGAR FACTORY

Directory of Open Access Journals (Sweden)

V. V. Ageev

2015-01-01

Full Text Available Beet-sugar factory - is a large, well-equipped with modern technology, the company that operates in a continuous circuit. In the technological structure of a sugar factory there are three production divisions: beet processing department, juice purification house and grocery department. In the grocery department of a sugar factory dangerous and harmful factors may encounter while using equipment such as vacuum devices, centrifuges, and crystallizer tank, massecuite distributor, driers and classifiers sugar. The working area of the service of machinery may appear dangerous or harmful factors, which are divided into the following groups: physical, chemical, biological and physiological. To maintain microclimate parameters can be applied general ventilation, in which the replacement of the warm air to the cold going around the room volume. Heating in the grocery department in the production season is not carried out, since it is sufficient to heat generated by the equipment. In the grocery department uses natural and artificial lighting. In the sugar factory used the following measures to protect against vibration: perform detailed assembly, eliminate defects and looseness of individual parts; way to isolate the transmission of vibrations from the machine to the foundation apply vibration isolators. Widespread use of electrical installations in a sugar factory creates the risk of electric shock to persons. Causes of electrical shocks are often disadvantages of construction and installation of the equipment, its operation is wrong. During drying and transportation of sugar produced by static electricity. To remove the static electricity equipment grounded; also used the increase in humidity; air ionization. To reduce the consumption of fresh industrial water from reservoirs provides for the establishment of the system of working circuits cleaning and maximum reuse of industrial water. Thus, safety and environmental compliance in the grocery

Lighting up yeast cell factories by transcription factor-based biosensors

DEFF Research Database (Denmark)

D'ambrosio, Vasil; Jensen, Michael Krogh

2017-01-01

Our ability to rewire cellular metabolism for the sustainable production of chemicals, fuels and therapeutics based on microbial cell factories has advanced rapidly during the last two decades. Especially the speed and precision by which microbial genomes can be engineered now allow for more...... process. For this purpose, there is a need to develop new techniques for screening and selection of best-performing cell factory designs in multiplex. Here we review the current status of the sourcing, design and engineering of biosensors derived from allosterically regulated transcription factors applied...... advanced designs to be implemented and tested. However, compared to the methods developed for engineering cell factories, the methods developed for testing the performance of newly engineered cell factories in high throughput are lagging far behind, which consequently impacts the overall biomanufacturing...

Batch anaerobic co-digestion of Kimchi factory waste silage and swine manure under mesophilic conditions.

Science.gov (United States)

Kafle, Gopi Krishna; Kim, Sang Hun; Sung, Kyung Ill

2012-11-01

The objective of this study was to investigate the feasibility of anaerobic co-digestion of Kimchi factory waste silage (KFWS) with swine manure (SM). Chinese cabbage (CC) is the major waste generated by a Kimchi factory and KFWS was prepared by mixing CC and rice bran (RB) (70:30 on a dry matter basis). In Experiment I, the biogas potential of CC and RB were measured and, in Experiment II, the test was conducted with different ratios of KFWS and SM (KFWS: SM=0:100; 33:67; 67:33; 100:0 by% volatile solids (VS) basis). KFWS produced a 27% higher biogas yield and a 59% higher methane yield compared to CC. The specific biogas yields increased by 19, 40 and 57% with KFWS-33%, KFWS-67% and KFWS-100%, respectively compared to SM-100% (394 mL/g VS). Similarly, VS removal increased by 37, 51 and 74% with KFWS-33%, KFWS-67% and KFWS-100%, respectively compared to SM-100%. These results suggested that Kimchi factory waste could be effectively treated by making silage, and the silage could be used as a potential co-substrate to enhance biogas production from SM digesters. Copyright © 2012 Elsevier Ltd. All rights reserved.

Study of electroless nickel plating on PerFactoryTM rapid prototype model

OpenAIRE

J.C. Rajaguru; C. Au, M. Duke

2012-01-01

This paper presents an investigation of electroless nickel plating on PerFactoryTM rapid prototype model built on PerFactoryTM R05 material. PerFactoryTM R05 is acrylic based photo sensitive resin. It is a popular material in rapid prototyping using PerFactoryTM method which employs addictive manufacturing technique to build prototypes for visual inspection, assembly etc. Metallization of such a prototype can extend the application envelop of the rapid prototyping technique as they can be use...

RIKEN RI Beam Factory project

Energy Technology Data Exchange (ETDEWEB)

Yano, Yasushige; Goto, Akira; Katayama, Takeshi [Institute of Physical and Chemical Research, Wako, Saitama (Japan)

1997-03-01

The RARF proposes `RIKEN RI Beam Factory` as a next facility-expanding project. The factory makes it the primary aim to provide RI (Radioactive Isotope) beams covering over the whole atomic-mass range with the world-highest intensity in a wide energy range up to several hundreds MeV/nucleon. These RI beams are generated by the fragmentation of high-intensity heavy-ion beams. For the efficient production heavy-ion energies will be boosted up to over 100 MeV/nucleon even for very heavy ions by a K2500-MeV superconducting ring cyclotron serving as a post accelerator of the existing K540-MeV ring cyclotron. A new type of experimental installation called `MUSES` (Multi-USe Experimental Storage rings) will be constructed as well. With MUSES, various types of unique colliding experiments will become possible. (author)

Quality Management Principles as Illustrated by the Organization of Romanian Inter-War Factories. A Century of Romanian Industrial Tradition in Aeronautics

Directory of Open Access Journals (Sweden)

Manuela RUSU

2017-03-01

Full Text Available Inter-war Romania developed 6 aircraft factories, the first starting its activity in 1916. Four of these, with three located in Bucharest, produced over 2000 aircraft, maily for the military use as Romania entered the Second World War. The activity of these factories was undertaken in times when nobody thought about formulating the principles of quality management and the research of the first scientists in quality, Deming, Shewhart and Juran had not yet been accepted or published. The work aims to present the inter-war Romanian aeronautical industry developments regarding the quality management.

Development of the multitracer technology for a simultaneous multi-elemental analysis and its evolution in RI-beam factory project

International Nuclear Information System (INIS)

Enomoto, Shuichi

2003-01-01

This review describes the method to produce the multitracer, its biobehavior, its application for environmental sciences, Nuclear Energy Fundamentals Crossover Research (for upgrading multitracer production technology, and development of the automatic chemical separation units and of the simultaneous imaging apparatus for multi gamma-ray nuclides), and Inst. of Physical and Chemical Research (RIKEN) RI-beam factory project. The multitracer technology is an efficient (i.e., many information's are available through one experimentation) tracer technique for studying the physical, chemical and biological behavior of elements with use of their multiple radioisotopes produced by accelerators like RIKEN ring cyclotron and of computer/semiconductor detector for their individual gamma-ray spectrometry. The multitracer elements are produced in their carrier-free forms by irradiation of the target element with the heavy particle (up to Ta, in RIKEN cyclotron) and by resultant nuclear fragmentation of the target. The multitracer through nuclear fragmentation and/or fission with an automated separation apparatus will be sophisticatedly supplied in future. GREI (gamma-ray emission imaging) is under investigation. The RI-beam factory project aims to irradiate/accelerate the radioisotope, which is expected to give novel knowledge's in biology like metabolic physiology. (N.I.)

JINR studies for a Tau-Charm Factory

International Nuclear Information System (INIS)

Chelkov, G.

1994-01-01

This paper touches on work being done a JINR relevant to a proposal for construction of a tau charm factory, and its attendant detector system. A workshop on such a device was held at JINR in 1992, and here the author touches on questions of what one wants to learn about tau particles from such a machine, the charge to the group looking at a detector design for such a facility, the general conclusions of the JINR study, and a status report of work on the JINR Tau Charm Factory project

PowerFactory applications for power system analysis

CERN Document Server

Gonzalez-Longatt, Francisco

2014-01-01

This book presents a comprehensive set of guidelines and applications of DIgSILENT PowerFactory, an advanced power system simulation software package, for different types of power systems studies. Written by specialists in the field, it combines expertise and years of experience in the use of DIgSILENT PowerFactory with a deep understanding of power systems analysis. These complementary approaches therefore provide a fresh perspective on how to model, simulate and analyse power systems. It presents methodological approaches for modelling of system components, including both classical and non-

Parametric study of a target factory for laser fusion

International Nuclear Information System (INIS)

Sherohman, J.W.; Meier, W.R.

1980-01-01

An analysis of a target factory leading to the derivation of production rate equations has provided the basis for a parametric study. Rate equations describing the production of laser fusion targets have been developed for the purpose of identifying key parameters, attractive production techniques and cost scaling relationships for a commercial target factory

Uptake and Bioaccumulation of Pentachlorophenol by Emergent Wetland Plant Phragmites australis (Common Reed) in Cadmium Co-contaminated Soil.

Science.gov (United States)

Hechmi, Nejla; Ben Aissa, Nadhira; Abdenaceur, Hassen; Jedidi, Naceur

2015-01-01

Despite many studies on phytoremediation of soils contaminated with either heavy metals or organics, little information is available on the effectiveness of phytoremediation of co-occurring metal and organic pollutants especially by using wetland species. Phragmites australis is a common wetland plant and its potential for phytoremediation of cadmium pentachlorophenol (Cd-PCP) co-contaminated soil was investigated. A greenhouse study was executed to elucidate the effects of Cd (0, 10, and 20 mg kg(-1)) without or with PCP (0, 50, and 250 mg kg(-1)) on the growth of the wetland plant P. australis and its uptake, accumulation and removal of pollutant from soils. After 75 days, plant biomass was significantly influenced by interaction of Cd and PCP and the effect of Cd on plant growth being stronger than that of PCP. Coexistence of PCP at low level lessened Cd toxicity to plants, resulting in improved plant growth and increased Cd accumulation in plant tissues. The dissipation of PCP in soils was significantly influenced by interactions of Cd, PCP and plant presence or absence. As an evaluation of soil biological activities after remediation soil enzyme was measured.

Higher order mode damping in Kaon factory RF cavities

International Nuclear Information System (INIS)

Enegren, T.; Poirier, R.; Griffin, J.; Walling, L.; Thiessen, H.A.; Smythe, W.R.

1989-05-01

Proposed designs for Kaon factory accelerators require that the rf cavities support beam currents on the order of several amperes. The beam current has Fourier components at all multiples of the rf frequency. Empty rf buckets produce additional components at all multiples of the revolution frequency. If a Fourier component of the beam coincides with the resonant frequency of a higher order mode of the cavity, which is inevitable if the cavity has a large frequency swing, significant excitation of this mode can occur. The induced voltage may then excite coupled bunch mode instabilities. Effective means are required to damp higher order modes without significantly affecting the fundamental mode. A mode damping scheme based on coupled transmission lines has been investigated and is report

B factory RF system design issues

International Nuclear Information System (INIS)

Zisman, M.S.

1992-01-01

We discuss the issues of relevance to the design of a B factory RF system. First, the general parameter regime is outlined, and the reasons behind certain commonly made choices are indicated. This regime involves high beam currents, and many relatively short bunches. Next, the physics difficulties associated with coupled-bunch instabilities are described briefly. We then describe in general terms the alternative approaches taken by various B factory designers, the motivation for these choices, and the technical issues raised by them. Technical solutions have been proposed for both the room-temperature and the superconducting RF scenarios, and considerable R ampersand D is being carried out worldwide to confirm and optimize these solutions

B factory rf system design issues

International Nuclear Information System (INIS)

Zisman, M.S.

1992-06-01

We discuss the issues of relevance to the design of a B factory RF system. First, the general parameter regime is outlined, and the reasons behind certain commonly made choices are indicated. This regime involves high beam currents, and many relatively short bunches. Next, the physics difficulties associated with coupled-bunch instabilities are described briefly. We then describe in general terms the alternative approaches taken by various B factory designers, the motivation for these choices, and the technical issues raised by them. Technical solutions have been proposed for both the room-temperature and the superconducting RF scenarios, and considerable R ampersand D is being carried out worldwide to confirm and optimize these solutions

Manufacturing data analytics using a virtual factory representation.

Science.gov (United States)

Jain, Sanjay; Shao, Guodong; Shin, Seung-Jun

2017-01-01

Large manufacturers have been using simulation to support decision-making for design and production. However, with the advancement of technologies and the emergence of big data, simulation can be utilised to perform and support data analytics for associated performance gains. This requires not only significant model development expertise, but also huge data collection and analysis efforts. This paper presents an approach within the frameworks of Design Science Research Methodology and prototyping to address the challenge of increasing the use of modelling, simulation and data analytics in manufacturing via reduction of the development effort. The use of manufacturing simulation models is presented as data analytics applications themselves and for supporting other data analytics applications by serving as data generators and as a tool for validation. The virtual factory concept is presented as the vehicle for manufacturing modelling and simulation. Virtual factory goes beyond traditional simulation models of factories to include multi-resolution modelling capabilities and thus allowing analysis at varying levels of detail. A path is proposed for implementation of the virtual factory concept that builds on developments in technologies and standards. A virtual machine prototype is provided as a demonstration of the use of a virtual representation for manufacturing data analytics.

How well do we need to know the beam properties at a neutrino factory?

International Nuclear Information System (INIS)

Geer, S.; Crisan, C.

2000-01-01

In principle, a neutrino factory can produce a beam with a well known ν e and ν μ flux. In practice, the uncertainties on the muon beam properties will introduce uncertainties into the calculated neutrino fluxes. The authors explore the relationship between the beam systematics and the systematic uncertainties on predicted event rates at a far site. The desired precision with which they must know the beam momentum, direction, divergence, momentum spread, and polarization are discussed

Factorial complexity and Morally Debatable Behaviors

Directory of Open Access Journals (Sweden)

Grimaldo Muchotrigo, Mirian P.

2011-12-01

Full Text Available Currently, from the scientific and professional practice point of view, comes out the necessity to know more about moral permissiveness, as it seems to be an increase in “moral relativism”.. Because it, it this is important to have tools to collect valid and reliable information about moral in social situations defined as social and personal behavior issue. This paper presents a technical note of The Morally Debatable Behaviors Scale (MDBS from Harding & Phillips (1986, which was developed in USA and mainly focused on young people and adults. This technical note makes direct reference to a recent Latin American study (Merino & Grimaldo, 2010; this article focuses on the internal structure and the problems associated with evidences of factorial complexity among items of the MDBS. This means that the interpretation of scores is not factorially simple and could not be achieved by a conceptual distinction between the latent constructs applied to the study sample.. The results in the previous study of the factorial complexity leads the researcher to decide whether an instrument for measuring this aspect may contain a reasonable amount of complexity that is consistent with what is in reality, or look for the unidimensional and simple structure.

Engineering cell factories for producing building block chemicals for bio-polymer synthesis.

Science.gov (United States)

Tsuge, Yota; Kawaguchi, Hideo; Sasaki, Kengo; Kondo, Akihiko

2016-01-21

Synthetic polymers are widely used in daily life. Due to increasing environmental concerns related to global warming and the depletion of oil reserves, the development of microbial-based fermentation processes for the production of polymer building block chemicals from renewable resources is desirable to replace current petroleum-based methods. To this end, strains that efficiently produce the target chemicals at high yields and productivity are needed. Recent advances in metabolic engineering have enabled the biosynthesis of polymer compounds at high yield and productivities by governing the carbon flux towards the target chemicals. Using these methods, microbial strains have been engineered to produce monomer chemicals for replacing traditional petroleum-derived aliphatic polymers. These developments also raise the possibility of microbial production of aromatic chemicals for synthesizing high-performance polymers with desirable properties, such as ultraviolet absorbance, high thermal resistance, and mechanical strength. In the present review, we summarize recent progress in metabolic engineering approaches to optimize microbial strains for producing building blocks to synthesize aliphatic and high-performance aromatic polymers.

Review of Hosein Aabad Sugar Factory (HASF) Wastewater and ...

African Journals Online (AJOL)

Sugar industry is one of the largest industries in the world. Hosein Abad sugar factory (HASF) is located in Hamadan province of Iran. The aim of this research was to evaluate the quality and quantity of wastewater of the said factory and to estimate the pollution load and its emission factor as prerequisite of the management ...

A Graphical Interactive Simulation Environment for Production Planning in Bacon Factories

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

1994-01-01

The paper describes a graphical interactive simulation tool for production planning in bacon factories........The paper describes a graphical interactive simulation tool for production planning in bacon factories.....

Rapid prototyping 3D virtual world interfaces within a virtual factory environment

Science.gov (United States)

Kosta, Charles Paul; Krolak, Patrick D.

1993-01-01

On-going work into user requirements analysis using CLIPS (NASA/JSC) expert systems as an intelligent event simulator has led to research into three-dimensional (3D) interfaces. Previous work involved CLIPS and two-dimensional (2D) models. Integral to this work was the development of the University of Massachusetts Lowell parallel version of CLIPS, called PCLIPS. This allowed us to create both a Software Bus and a group problem-solving environment for expert systems development. By shifting the PCLIPS paradigm to use the VEOS messaging protocol we have merged VEOS (HlTL/Seattle) and CLIPS into a distributed virtual worlds prototyping environment (VCLIPS). VCLIPS uses the VEOS protocol layer to allow multiple experts to cooperate on a single problem. We have begun to look at the control of a virtual factory. In the virtual factory there are actors and objects as found in our Lincoln Logs Factory of the Future project. In this artificial reality architecture there are three VCLIPS entities in action. One entity is responsible for display and user events in the 3D virtual world. Another is responsible for either simulating the virtual factory or communicating with the real factory. The third is a user interface expert. The interface expert maps user input levels, within the current prototype, to control information for the factory. The interface to the virtual factory is based on a camera paradigm. The graphics subsystem generates camera views of the factory on standard X-Window displays. The camera allows for view control and object control. Control or the factory is accomplished by the user reaching into the camera views to perform object interactions. All communication between the separate CLIPS expert systems is done through VEOS.

Effects of Dielectric Barrier Discharge Plasma Treatment on Pentachlorophenol Removal of Granular Activated Carbon

International Nuclear Information System (INIS)

Ji Puhui; Qu Guangzhou; Li Jie

2013-01-01

The pentachlorophenol (PCP) adsorbed granular activated carbon (GAC) was treated by dielectric barrier discharge (DBD) plasma. The effects of DBD plasma on the structure of GAC and PCP decomposition were analyzed by N 2 adsorption, thermogravimetric, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and gas chromatography mass spectrometry (GC-MS). The experimental data of adsorption kinetics and thermodynamics of PCP on GAC were fitted with different kinetics and isotherm models, respectively. The results indicate that the types of N 2 adsorption isotherm of GAC are not changed by DBD plasma, while the specific surface area and pore volume increase after DBD plasma treatment. It is found that the weight loss of the saturated GAC is the highest, on the contrary, the weight loss of DBD treated GAC is the least because of reduced PCP residue on the GAC. The XPS spectra and SEM image suggest that some PCP on the GAC is removed by DBD plasma, and the surface of GAC treated by DBD plasma presents irregular and heterogeneous morphology. The GC-MS identification of by-products shows that two main dechlorination intermediate products, tetrachlorophenol and trichlorophenol, are distinguished. The fitting results of experimental data of adsorption kinetics and thermodynamics indicate that the pseudo-first-order and pseudo-second order models can be used for the prediction of the kinetics of virgin GAC and DBD treated GAC for PCP adsorption, and the Langmuir isotherm model fits better with the data of adsorption isotherm than the Freundlich isotherm in the adsorption of PCP on virgin GAC and DBD treated GAC

Baby Factories in Nigeria: Starting the Discussion Toward a National Prevention Policy.

Science.gov (United States)

Makinde, Olusesan Ayodeji; Olaleye, Olalekan; Makinde, Olufunmbi Olukemi; Huntley, Svetlana S; Brown, Brandon

2017-01-01

Baby factories and baby harvesting are relatively new terms that involve breeding, trafficking, and abuse of infants and their biological mothers. Since it was first described in a United Nations Educational, Scientific and Cultural Organization report in Nigeria in 2006, several more baby factories have been discovered over the years. Infertile women are noted to be major patrons of these baby factories due to the stigmatization of childless couples in Southern Nigeria and issues around cultural acceptability of surrogacy and adoption. These practices have contributed to the growth in the industry which results in physical, psychological, and sexual violence to the victims. Tackling baby factories will involve a multifaceted approach that includes advocacy and enacting of legislation barring baby factories and infant trafficking and harsh consequences for their patrons. Also, programs to educate young girls on preventing unwanted pregnancies are needed. Methods of improving awareness and acceptability of adoption and surrogacy and reducing the administrative and legal bottlenecks associated with these options for infertile couples should be explored to diminish the importance of baby factories. © The Author(s) 2015.

Optimal Site Characterization and Selection Criteria for Oyster Restoration using Multicolinear Factorial Water Quality Approach

Science.gov (United States)

Yoon, J.

2015-12-01

Elevated levels of nutrient loadings have enriched the Chesapeake Bay estuaries and coastal waters via point and nonpoint sources and the atmosphere. Restoring oyster beds is considered a Best Management Practice (BMP) to improve the water quality as well as provide physical aquatic habitat and a healthier estuarine system. Efforts include declaring sanctuaries for brood-stocks, supplementing hard substrate on the bottom and aiding natural populations with the addition of hatchery-reared and disease-resistant stocks. An economic assessment suggests that restoring the ecological functions will improve water quality, stabilize shorelines, and establish a habitat for breeding grounds that outweighs the value of harvestable oyster production. Parametric factorial models were developed to investigate multicolinearities among in situ water quality and oyster restoration activities to evaluate posterior success rates upon multiple substrates, and physical, chemical, hydrological and biological site characteristics to systematically identify significant factors. Findings were then further utilized to identify the optimal sites for successful oyster restoration augmentable with Total Maximum Daily Loads (TMDLs) and BMPs. Factorial models evaluate the relationship among the dependent variable, oyster biomass, and treatments of temperature, salinity, total suspended solids, E. coli/Enterococci counts, depth, dissolved oxygen, chlorophyll a, nitrogen and phosphorus, and blocks consist of alternative substrates (oyster shells versus riprap, granite, cement, cinder blocks, limestone marl or combinations). Factorial model results were then compared to identify which combination of variables produces the highest posterior biomass of oysters. Developed Factorial model can facilitate maximizing the likelihood of successful oyster reef restoration in an effort to establish a healthier ecosystem and to improve overall estuarine water quality in the Chesapeake Bay estuaries.

BERKELEY/STANFORD: B factory plans

International Nuclear Information System (INIS)

Anon.

1991-01-01

For the past several years, accelerator physicists at Lawrence Berkeley Laboratory (LBL) and the Stanford Linear Accelerator Center (SLAC) have been involved in the design of an Asymmetric B Factory to be sited in the tunnel of the PEP electron-positron collider at SLAC

JINR tau-charm factory design study

International Nuclear Information System (INIS)

Perel'shtejn, E.; Aleksandrov, V.; Antropov, V.

1993-01-01

The review on tau-charm factory in JINR (Dubna) is presented. The structure scheme of tau-charm factory is described. The problems on injection complex are discussed: the composition, the working regime and parameters. The magnetic lattice of a booster is described. A versatile magnet lattice is used in tau-charm collider. It can realize both conventional flat beam scheme and monochromatization scheme. The results of chromaticity correction in high emittance lattice are presented. The list of parameters of tau-charm collider is given. The technical proposal of magnetic elements of booster and collider and their power supplies is made, as well as RF power supply in collider and vacuum system in its periodic cell. 12 refs.; 12 figs.; 3 tabs

Status of neutrino factory and muon collider R and D

International Nuclear Information System (INIS)

Zisman, M.S.

2001-01-01

A significant worldwide R and D effort is presently directed toward solving the technical challenges of producing, cooling, accelerating, storing, and eventually colliding beams of muons. Its primary thrust is toward issues critical to a Neutrino Factory, for which R and D efforts are under way in the U.S., via the Neutrino Factory and Muon Collider Collaboration (MC); in Europe, centered at CERN; and in Japan, at KEK. Under study and experimental development are production targets handling intense proton beams (1-4 MW), phase rotation systems to reduce beam energy spread, cooling channels to reduce transverse beam emittance for the acceleration system, and storage rings where muon decays in a long straight section provide a neutrino beam for a long-baseline (3000 km) experiment. Critical experimental activities include development of very high gradient normal conducting RF (NCRF) and superconducting RF (SCRF) cavities, high-power liquid-hydrogen absorbers, and high-field superconducting solenoids. Components and instrumentation that tolerate the intense decay products of the muon beam are being developed for testing. For a high-luminosity collider, muons must be cooled longitudinally as well as transversely, requiring an emittance exchange scheme. In addition to the experimental R and D effort, sophisticated theoretical and simulation tools are needed for the design. Here, the goals, present status, and future R and D plans in these areas will be described

Strategic analysis of a factory built home opportunity in Western Canada

OpenAIRE

Henderson, Stephen Gary

2006-01-01

A strategic analysis was completed to determine the feasibility of initiating a factory-built home manufacturing facility in Western Canada. We completed an industry analysis, internal analysis, an opportunity analysis and provide a recommendation on how to proceed. The results indicate a factory built facility is economically feasible if a market of 60 houses per year can be established. The competitive advantages of factory built homes over on-site homes indicate a better quality home can b...

Superconducting magnets for induction linac phase-rotation in a neutrino factory

International Nuclear Information System (INIS)

Green, M.A.; Yu, S.

2001-01-01

The neutrino factory[1-3] consists of a target section where pions are produced and captured in a solenoidal magnetic field. Pions in a range of energies from 100 Mev to 400 MeV decay into muons in an 18-meter long channel of 1.25 T superconducting solenoids. The warm bore diameter of these solenoids is about 600 mm. The phase rotation section slows down the high-energy muon and speeds up the low energy muons to an average momentum of 200 MeV/c. The phase-rotation channel consists of three induction linac channels with a short cooling section and a magnetic flux reversal section between the first and second induction linacs and a drift space between the second and third induction linacs. The length of the phase rotation channel will be about 320 meters. The superconducting coils in the channel are 0.36 m long with a gap of 0.14 m between the coils. The magnetic induction within the channel will be 1.25. For 260 meters of the 320-meter long channel, the solenoids are inside the induction linac. This paper discusses the design parameters for the superconducting solenoids in the neutrino factory phase-rotation channel

29 CFR 776.18 - Employees of producers for commerce.

Science.gov (United States)

2010-07-01

... productive operations or at most as a dispensable, collateral incident to them and not with a view to any... the operation of a cookhouse may in fact be “closely related” and “directly essential” or, indeed..., including restaurants, cafeterias, and snack bars, for the producer's employees in a factory, or in...

The Experience Factory: Strategy and Practice

Science.gov (United States)

Basili, Victor R.; Caldiera, Gianluigi

1995-01-01

The quality movement, that has had in recent years a dramatic impact on all industrial sectors, has recently reached the system and software industry. Although some concepts of quality management, originally developed for other product types, can be applied to software, its specificity as a product which is developed and not produced requires a special approach. This paper introduces a quality paradigm specifically tailored on the problem of the systems and software industry. Reuse of products, processes and experiences originating from the system life cycle is seen today as a feasible solution to the problem of developing higher quality systems at a lower cost. In fact, quality improvement is very often achieved by defining and developing an appropriate set of strategic capabilities and core competencies to support them. A strategic capability is, in this context, a corporate goal defined by the business position of the organization and implemented by key business processes. Strategic capabilities are supported by core competencies, which are aggregate technologies tailored to the specific needs of the organization in performing the needed business processes. Core competencies are non-transitional, have a consistent evolution, and are typically fueled by multiple technologies. Their selection and development requires commitment, investment and leadership. The paradigm introduced in this paper for developing core competencies is the Quality Improvement Paradigm which consists of six steps: (1) Characterize the environment, (2) Set the goals, (3) Choose the process, (4) Execute the process, (5) Analyze the process data, and (6) Package experience. The process must be supported by a goal oriented approach to measurement and control, and an organizational infrastructure, called Experience Factory. The Experience Factory is a logical and physical organization distinct from the project organizations it supports. Its goal is development and support of core competencies

Factory Gate Pricing: An Analysis of the Dutch Retail Distribution

NARCIS (Netherlands)

H.M. le Blanc; F. Cruijssen (Frans); H.A. Fleuren; M.B.M. de Koster (René)

2004-01-01

textabstractFactory Gate Pricing (FGP) is a relatively new phenomenon in retail distribution. Under FGP, products are no longer delivered at the retailer distribution center, but collected by the retailer at the factory gates of the suppliers. Owing to both the asymmetry in the distribution networks

Factory Gate Pricing : An Analysis of the Dutch Retail Distribution

NARCIS (Netherlands)

Le Blanc, H.M.; Cruijssen, F.C.A.M.; Fleuren, H.A.; de Koster, M.B.M.

2004-01-01

Factory Gate Pricing (FGP) is a relatively new phenomenon in retail distribution.Under FGP, products are no longer delivered at the retailer distribution center, but collected by the retailer at the factory gates of the suppliers.Owing to both the asymmetry in the distribution networks (the supplier

Physics at a future Neutrino Factory and super-beam facility

NARCIS (Netherlands)

Bandyopadhyay, A.; Choubey, S.; Gandhi, R.; Goswami, S.; Roberts, B. L.; Bouchez, J.; Antoniadis, I.; Ellis, J.; Giudice, G. F.; Schwetz, T.; Umasankar, S.; Karagiorgi, G.; Aguilar-Arevalo, A.; Conrad, J. M.; Shaevitz, M. H.; Pascoli, S.; Geer, S.; Campagne, J. E.; Rolinec, M.; Blondel, A.; Campanelli, M.; Kopp, J.; Lindner, M.; Peltoniemi, J.; Dornan, P. J.; Long, K.; Matsushita, T.; Rogers, C.; Uchida, Y.; Dracos, M.; Whisnant, K.; Casper, D.; Chen, Mu-Chun; Popov, B.; Aysto, J.; Marfatia, D.; Okada, Y.; Sugiyama, H.; Jungmann, K.; Lesgourgues, J.; Zisman, M.; Tortola, M. A.; Friedland, A.; Davidson, S.; Antusch, S.; Biggio, C.; Donini, A.; Fernandez-Martinez, E.; Gavela, B.; Maltoni, M.

2009-01-01

The conclusions of the Physics Working Group of the International Scoping Study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried out by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and

"Mixing" as an ethnoetiology of HIV/AIDS in Malaysia's multinational factories.

Science.gov (United States)

Root, Robin

2006-09-01

Minah Karan, the stigmatizing label appended to Malay factory women in the 1980s, signaled a dangerous female sexuality that risked spreading beyond the factory gates and infecting Malaysia's idea(l)s of its traditional kampung culture. This article narrates how Minah Karan, as the former antihero of development, was reconstituted in the 1990s, with the government's labeling of factories as "high-risk settings" for HIV/AIDS. This is an ethnoetiology based not on any evidential epidemiological data but on the racial and gendered "mixing" that transpires behind factory walls: a fear that the "mixing of the sexes" means ipso facto "sexual mixing" among the races. The article demonstrates how importation of the high-risk label articulates at the local level the new and contested linkages, economic, religious, and scientific, constitutive of globalization. The pragmatic nature and imperatives of this high-risk process are discerned in factory women's accounts of how they negotiate the interactional imperatives of factory work, because transnational structures of productivity violate the social boundaries that have long connoted political stability, moral integrity, ethnic community, and individual safety. The article concludes by questioning whether ethnoetiologies, especially when they concern sexual networks, become social etiologies, because this would locate ethnoetiologies as central to conventional public health praxis rather than as ethnographic exotica in the margins.

Neutrino factory plans at CERN

CERN Document Server

Riche, J A

2001-01-01

The considerable interest raised by the discovery of neutrino oscillations and recent progress in studies of muon colliders has triggered interest in considering a neutrino factory at CERN. This paper explains the reference scenario, indicates the other possible choices and mentions the R&D that are foreseen.

Physics at a future Neutrino Factory and super-beam facility

CERN Document Server

Bandyopadhyay, A; Gandhi, R; Goswami, S; Roberts, B L; Bouchez, J; Antoniadis, I; Ellis, J; Giudice, G F; Schwetz, T; Umansankar, S; Karagiorgi, G; Aguilar-Arevalo, A; Conrad, J M; Shaevitz, M H; Pascoli, Silvia; Geer, S; Rolinec, M; Blondel, A; Campanelli, M; Kopp, J; Lindner, M; Peltoniemi, J; Dornan, P J; Long, K; Matsushita, T; Rogers, C; Uchida, Y; Dracos, M; Whisnant, K; Casper, D; Chen, Mu-Chun; Popov, B; Aysto, J; Marfatia, D; Okada, Y; Sugiyama, H; Jungmann, K; Lesgourgues, J; Murayama, France H; Zisman, M; Tortola, M A; Friedland, A; Antusch, S; Biggio, C; Donini, A; Fernandez-Martinez, E; Gavela, B; Maltoni, M; Lopez-Pavon, J; Rigolin, S; Mondal, N; Palladino, V; Filthaut, F; Albright, C; de Gouvea, A; Kuno, Y; Nagashima, Y; Mezzetoo, M; Lola, S; Langacker, P; Baldini, A; Nunokawa, H; Meloni, D; Diaz, M; King, S F; Zuber, K; Akeroyd, A G; Grossman, Y; Farzan, Y; Tobe, K; Aoki, Mayumi; Kitazawa, N; Yasuda, O; Petcov, S; Romanino, A; Chimenti, P; Vacchi, A; Smirnov, A Yu; Couce, Italy E; Gomez-Cadenas, J J; Hernandez, P; Sorel, M; Valle, J W F; Harrison, P F; Lundardini, C; Nelson, J K; Barger, V; Everett, L; Huber, P; Winter, W; Fetscher, W; van der Schaaf, A

2009-01-01

The conclusions of the Physics Working Group of the international scoping study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and Superbeams, Laboratori Nazionali di Frascati, Rome, June 21-26, 2005) and NuFact06 (Ivine, California, 24{30 August 2006). The physics case for an extensive experimental programme to understand the properties of the neutrino is presented and the role of high-precision measurements of neutrino oscillations within this programme is discussed in detail. The performance of second generation super-beam experiments, beta-beam facilities, and the Neutrino Factory are evaluated and a quantitative comparison of the discovery potential of the three classes of facility is presented. High-precision studies of the properties of the muon are complementary to the study of neutrino oscillations. The Neutrino Factory has the potential to provide ...

Handbook factory planning and design

CERN Document Server

Wiendahl, Hans-Peter; Nyhuis, Peter

2015-01-01

This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. -        Concise overview o...

Factorial moment and fractal analysis of γ families

International Nuclear Information System (INIS)

Kalmakhelidze, M.Eh.; Roinishvili, N.N.; Svanidze, M.S.; Khizanishvili, L.A.; Chadranyan, L.Kh.

1997-01-01

Factorial and fractal methods were applied to nuclear-electromagnetic cascades in the atmosphere (γ families) to find sensitivity of these methods to multiparticle fluctuations in γ families. Averaged parameters of factorial and fractal methods of the real families were compared with the same quantities for the statistical set of random families. The correlations between the same parameters for families divided into sectors and into rings are studied. The correlations between different parameters for the same families divided into sectors are investigated

A factorial experiment on image quality and radiation dose

International Nuclear Information System (INIS)

Norrman, E.; Persliden, J.

2005-01-01

To find if factorial experiments can be used in the optimisation of diagnostic imaging, a factorial experiment was performed to investigate some of the factors that influence image quality, kerma area product (KAP) and effective dose (E). In a factorial experiment the factors are varied together instead of one at a time, making it possible to discover interactions between the factors as well as major effects. The factors studied were tube potential, tube loading, focus size and filtration. Each factor was set to two levels (low and high). The influence of the factors on the response variables (image quality, KAP and E) was studied using a direct digital detector. The major effects of each factor on the response variables were estimated as well as the interaction effects between factors. The image quality, KAP and E were mainly influenced by tube loading, tube potential and filtration. There were some active interactions, for example, between tube potential and filtration and between tube loading and filtration. The study shows that factorial experiments can be used to predict the influence of various parameters on image quality and radiation dose. (authors)

Automation in the factory

Energy Technology Data Exchange (ETDEWEB)

Hatvany, J

1984-05-01

There are now about 100000 computers in the manufacturing plants of the world, but the thirty-year old dream of the computer-controlled factory is only now beginning to materialize. With the advent of advanced microprocessor technology of distributed systems based on local area networking and of supervisory and diagnostic systems utilizing artificial intelligence techniques, computer-integrated manufacturing (CIM) has today become a realistic aim. 6 references.

Assessment of Work Zone Noise Levels at a Cement Factory in ...

African Journals Online (AJOL)

Assessment of Work Zone Noise Levels at a Cement Factory in Tanga, Tanzania. ... measured in most production sections exceeded the allowed limit value of 85 ... Keywords: Noise levels, Noise exposure, Cement factory, Survey, Tanzania ...

An asymmetric B factory based on PEP

International Nuclear Information System (INIS)

1991-02-01

In this report we describe a design for a high-luminosity Asymmetric B Factory to be built in the PEP tunnel on the SLAC site. This proposal, a collaborative effort SLAC, LBL, and LLNL, is the culmination of more than two years of effort aimed at the design and construction of an asymmetric e + e - collider capable of achieving a luminosity of L = 3 x 10 33 cm -2 s -1 . The configuration adopted utilizes two storage rings, and electron ring operating at 9 GeV and a positron ring at 3.1 GeV, each with a circumference of 2200 m. The high-energy ring is an upgrade of the PEP storage ring at SLAC; all PEP magnets and most power supplies will be reused. The upgrade consists primarily of replacing the PEP vacuum chamber and RF system with newly designed versions optimized for the high-current environment of the B Factory. The low-energy ring will be newly constructed and will be situated atop the high-energy ring in the PEP tunnel. Utilities already installed in the PEP tunnel are largely sufficient to operate the two B Factory storage rings

A Review of "Infinity Factory."

Science.gov (United States)

National Council of Teachers of Mathematics, Inc., Reston, VA.

Following a discussion of the historical background of the TV series "Infinity Factory," the goals of the television project are listed. A general description of the television series, an evaluation of the entertainment value, and an evaluation of children's attitude change are briefly presented. The program's presentation of mathematics…

Effect of factory effluents on physiological and biochemical contents of Gossypium hirsutum l.

Science.gov (United States)

Muthusamy, A; Jayabalan, N

2001-10-01

The effect of sago and sugar factory effluents was studied on Gossypium hirsutum L. var. MCU 5 and MCU 11. Plants were irrigated with 0, 25, 50, 75 and 100% of effluents of both factories. At lower concentration (25%) of sugar factory effluents had stimulatory effect on all biochemical contents observed. Moreover, all concentration of sago factory effluents were found to have inhibitory effect on all biochemical contents except proline content which increased with increasing concentration of both the effluents. Plants growing on adjacent to sago and sugar factories or they irrigated with such type of polluted water, may accumulate the heavy metals found in both the effluents, at higher levels in plant products and if consumed may have similar effect on living organisms.

An asymmetric Β-factory based on PEP

International Nuclear Information System (INIS)

Oddone, P.

1989-01-01

This paper reviews the motivation for building asymmetric B-factories based on storage rings and describes the current LBL/SLAC study to develop such a factory by modifying the PEP storage ring and adding a new low energy (2.5-3 GeV) storage ring. Collisions between the beam of the modified high energy PEP ring and the low energy ring lead to a luminosity of 2 x 10 33 cm- 2 sec - 1 at E cm = Y(4s) with currents of 0.8A in each beam. Further increases in current can lead to luminosities close to 10 34 cm - 2 sec - 1

Synthetic yeast based cell factories for vanillin-glucoside production

DEFF Research Database (Denmark)

Strucko, Tomas

and controlled expression/overexpression of genes of interest. De novo biosynthetic pathway for vanillin-β-glucoside production was employed as a model system for several case studies in this project. In order to construct yeast cell factories fulfilling current demands of industrial biotechnology, methods......The yeast Saccharomyces cerevisiae is well a characterized microorganism and widely used as eukaryotic model organism as well as a key cell factory for bioproduction of various products. The latter comprise a large variety of scientifically and industrially relevant products such as low-value bulk...... chemicals and biofuels, food additives, high-value chemicals and recombinant proteins. Despite the recent achievements in the fields of systems biology and metabolic engineering together with availability of broad genetic engineering toolbox, the full potential of S. cerevisiae as a cell factory is not yet...

Photosynthesis energy factory: analysis, synthesis, and demonstration. Final report

Energy Technology Data Exchange (ETDEWEB)

1978-11-01

This quantitative assessment of the potential of a combined dry-land Energy Plantation, wood-fired power plant, and algae wastewater treatment system demonstrates the cost-effectiveness of recycling certain by-products and effluents from one subsystem to another. Designed to produce algae up to the limit of the amount of carbon in municipal wastewater, the algae pond provides a positive cash credit, resulting mainly from the wastewater treatment credit, which may be used to reduce the cost of the Photosynthesis Energy Factory (PEF)-generated electricity. The algae pond also produces fertilizer, which reduces the cost of the biomass produced on the Energy Plantation, and some gas. The cost of electricity was as low as 35 mills per kilowatt-hour for a typical municipally-owned PEF consisting of a 65-MWe power plant, a 144-acre algae pond, and a 33,000-acre Energy Plantation. Using only conventional or near-term technology, the most cost-effective algae pond for a PEF is the carbon-limited secondary treatment system. This system does not recycle CO/sub 2/ from the flue gas. Analysis of the Energy Plantation subsystem at 15 sites revealed that plantations of 24,000 to 36,000 acres produce biomass at the lowest cost per ton. The following sites are recommended for more detailed evaluation as potential demonstration sites: Pensacola, Florida; Jamestown, New York; Knoxville, Tennessee; Martinsville, Virginia, and Greenwood, South Carolina. A major possible extension of the PEF concept is to include the possibility for irrigation.

Pentachlorophenol-Induced Cytotoxic, Mitogenic, and Endocrine-Disrupting Activities in Channel Catfish, Ictalurus punctatus

Directory of Open Access Journals (Sweden)

Paul B. Tchounwou

2004-09-01

Full Text Available Pentachlorophenol (PCP is an organochlorine compound that has been widely used as a biocide in several industrial, agricultural, and domestic applications. Although it has been shown to induce systemic toxicity and carcinogenesis in several experimental studies, the literature is scarce regarding its toxic mechanisms of action at the cellular and molecular levels. Recent investigations in our laboratory have shown that PCP induces cytotoxicity and transcriptionally activates stress genes in human liver carcinoma (HepG2 cells [1]. In this research, we hypothesize that environmental exposure to PCP may trigger cytotoxic, mitogenic, and endocrine-disrupting activities in aquatic organisms including fish. To test this hypothesis, we carried out in vitro cultures of male channel catfish hepatocytes, and performed the fluorescein diacetate assay (FDA to assess for cell viability, and the Western Blot analysis to assess for vitellogenin expression following exposure to PCP. Data obtained from FDA experiments indicated a strong dose-response relationship with respect to PCP cytotoxicity. Upon 48 hrs of exposure, the chemical dose required to cause 50% reduction in cell viability (LD50 was computed to be 1,987.0 + 9.6 μg PCP/mL. The NOAEL and LOAEL were 62.5 + 10.3 μg PCP/mL and 125.0+15.2 μg PCP/mL, respectively. At lower levels of exposure, PCP was found to be mitogenic, showing a strong dose- and time-dependent response with regard to cell proliferation. Western Blot analysis demonstrated the potential of PCP to cause endocrine-disrupting activity, as evidenced by the up regulation of the 125-kDa vitellogenin protein the hepatocytes of male channel catfish.

Profil Konsumen dan Pesaing pada “Factory Bakery”

OpenAIRE

Salam, Ramdhan; Rengkung, Leonardus R; Katiandagho, Theodora M; Ngangi, Charles R

2015-01-01

The purpose of this study was to describe the profile of competitors and consumers in the Factory Bakery. This research was conducted at the Factory Bakery is located at Pogidon Street, Tuminting, Manado. The collection of data carried out for three months, from June 2015 to Agustus 2015. The primary data in this study were taken two ways to measure the variables of consumers by asking directly to consumers for six days, whereas for measuring competitors by asking directly to the owner of th...

Engineering Microbial Chemical Factories to Produce Renewable ‘Biomonomers’

Directory of Open Access Journals (Sweden)

Jake eAdkins

2012-08-01

Full Text Available By applying metabolic engineering tools and strategies to engineer synthetic enzyme pathways, the number and diversity of commodity and specialty chemicals that can be derived directly from renewable feedstocks is rapidly and continually expanding. This of course includes a number of monomer building-block chemicals that can be used to produce replacements to many conventional plastic materials. This review aims to highlight numerous recent and important advancements in the microbial production of these so-called ‘biomonomers’. Relative to naturally-occurring renewable bioplastics, biomonomers offer several important advantages, including improved control over the final polymer structure and purity, the ability to synthesize non-natural copolymers, and allowing products to be excreted from cells which ultimately streamlines downstream recovery and purification. To highlight these features, a handful of biomonomers have been selected as illustrative examples of recent works, including polyamide monomers, styrenic vinyls, hydroxyacids, and diols. Where appropriate, examples of their industrial penetration to date and end-product uses are also highlighted. Novel biomonomers such as these are ultimately paving the way towards new classes of renewable bioplastics that possess a broader diversity of properties than ever before possible.

Engineering microbial chemical factories to produce renewable “biomonomers”

Science.gov (United States)

Adkins, Jake; Pugh, Shawn; McKenna, Rebekah; Nielsen, David R.

2012-01-01

By applying metabolic engineering tools and strategies to engineer synthetic enzyme pathways, the number and diversity of commodity and specialty chemicals that can be derived directly from renewable feedstocks is rapidly and continually expanding. This of course includes a number of monomer building-block chemicals that can be used to produce replacements to many conventional plastic materials. This review aims to highlight numerous recent and important advancements in the microbial production of these so-called “biomonomers.” Relative to naturally-occurring renewable bioplastics, biomonomers offer several important advantages, including improved control over the final polymer structure and purity, the ability to synthesize non-natural copolymers, and allowing products to be excreted from cells which ultimately streamlines downstream recovery and purification. To highlight these features, a handful of biomonomers have been selected as illustrative examples of recent works, including polyamide monomers, styrenic vinyls, hydroxyacids, and diols. Where appropriate, examples of their industrial penetration to date and end-product uses are also highlighted. Novel biomonomers such as these are ultimately paving the way toward new classes of renewable bioplastics that possess a broader diversity of properties than ever before possible. PMID:22969753

Factorial representations of path groups

International Nuclear Information System (INIS)

Albeverio, S.; Hoegh-Krohn, R.; Testard, D.; Vershik, A.

1983-11-01

We give the reduction of the energy representation of the group of mappings from I = [ 0,1 ], S 1 , IRsub(+) or IR into a compact semi simple Lie group G. For G = SU(2) we prove the factoriality of the representation, which is of type III in the case I = IR

Morphogenesis of mimivirus and its viral factories: an atomic force microscopy study of infected cells.

Science.gov (United States)

Kuznetsov, Yuri G; Klose, Thomas; Rossmann, Michael; McPherson, Alexander

2013-10-01

Amoebas infected with mimivirus were disrupted at sequential stages of virus production and were visualized by atomic force microscopy. The development of virus factories proceeded over 3 to 4 h postinfection and resulted from the coalescence of 0.5- to 2-μm vesicles, possibly bearing nucleic acid, derived from either the nuclear membrane or the closely associated rough endoplasmic reticulum. Virus factories actively producing virus capsids on their surfaces were imaged, and this allowed the morphogenesis of the capsids to be delineated. The first feature to appear on a virus factory surface when a new capsid is born is the center of a stargate, which is a pentameric protein oligomer. As the arms of the stargate grow from the pentamer, a rough disk the diameter of a capsid thickens around it. This marks the initial emergence of a protein-coated membrane vesicle. The capsid self-assembles on the vesicle. Hillocks capped by different pentameric proteins spontaneously appear on the emerging vesicle at positions that are ultimately occupied by 5-fold icosahedral vertices. A lattice of coat protein nucleates at each of the 5-fold vertices, but not at the stargate, and then spreads outward from the vertices over the surface, merging seamlessly to complete the icosahedral capsid. Filling with DNA and associated proteins occurs by the transfer of nucleic acid from the interior of the virus factory into the nearly completed capsids. The portal, through which the DNA enters, is sealed by a plug of protein having a diameter of about 40 nm. A layer of integument protein that anchors the surface fibers is acquired by the passage of capsids through a membrane enriched in the protein. The coating of surface fibers is similarly acquired when the integument protein-coated capsids pass through a second membrane that has a forest of surface fibers embedded on one side.

The TRIUMF KAON Factory

International Nuclear Information System (INIS)

Craddock, M.

1989-05-01

TRIUMF has been awarded $11M for a one-year pre-construction Engineering Design and Impact Study of the KAON Factory. This will enable prototypes of many accelerator components to be built and the design of the accelerators and the layout of the experimental areas to be reviewed. The building and tunnel designs will be finalized, environmental, legal and economic impact studies carried out, and international involvement pursued further

SLAC B Factory computing

International Nuclear Information System (INIS)

Kunz, P.F.

1992-02-01

As part of the research and development program in preparation for a possible B Factory at SLAC, a group has been studying various aspects of HEP computing. In particular, the group is investigating the use of UNIX for all computing, from data acquisition, through analysis, and word processing. A summary of some of the results of this study will be given, along with some personal opinions on these topics

Proceedings of the Workshop on CP Violation at KAON Factory

International Nuclear Information System (INIS)

Ng, J.N.

1989-07-01

These proceedings contain the written version of eight talks delivered at the Workshop on CP Violation at KAON Factory. The articles contain reviews on the exploration of CP violation effects associated with the s-quark. Discussion on the use of intense kaon fluxes, which will be available at the proposed KAON Factory, are included

Physics at a future Neutrino Factory and super-beam facility

International Nuclear Information System (INIS)

Bandyopadhyay, A; Choubey, S; Gandhi, R; Goswami, S; Roberts, B L; Bouchez, J; Antoniadis, I; Ellis, J; Giudice, G F; Schwetz, T; Umasankar, S; Karagiorgi, G; Aguilar-Arevalo, A; Conrad, J M; Shaevitz, M H; Pascoli, S; Geer, S; Campagne, J E; Rolinec, M; Blondel, A

2009-01-01

The conclusions of the Physics Working Group of the International Scoping Study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried out by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and Super-beams, Laboratori Nazionali di Frascati, Rome, 21-26 June 2005) and NuFact06 (Ivine, CA, 24-30 August 2006). The physics case for an extensive experimental programme to understand the properties of the neutrino is presented and the role of high-precision measurements of neutrino oscillations within this programme is discussed in detail. The performance of second-generation super-beam experiments, beta-beam facilities and the Neutrino Factory are evaluated and a quantitative comparison of the discovery potential of the three classes of facility is presented. High-precision studies of the properties of the muon are complementary to the study of neutrino oscillations. The Neutrino Factory has the potential to provide extremely intense muon beams and the physics potential of such beams is discussed in the final section of the report.

Feasibility study for an asymmetric B-factory at KEK

International Nuclear Information System (INIS)

Ozaki, Hitoshi; Yoshimura, Yoshio

1990-06-01

In June, 1989, the study group for exploring the feasibility of B meson physics using an asymmetric energy accelerator was organized. This report is the summary of the results of the works that this study group carried out in nine months, and is the Japanese edition of the report of English edition 'Task Force Report on Asymmetric B-factory at KEK'. The activity plan of the study group was to make up the plan exceeding the preceding CLEO-2 experiment by utilizing the features of an asymmetric B-factory. Under this plan, the activities have been carried out by the study meetings twice every week on the physics side and once every two weeks on the accelerator side. Besides, in two study meetings held in October and December, 1989, several persons who have engaged in the research on B meson physics actually in foreign countries were invited, and the discussion was carried out. At present toward the materialization of the plan, the concrete investigation of accelerators and measuring instruments was begun. The significance of a B-factory and the construction project, the physics of a B-factory, the experimental method and the plan for an accelerator are reported. (K.I.)

Why and how to normalize the factorial moments of intermittency

International Nuclear Information System (INIS)

Peschanski, R.

1990-01-01

The normalization of factorial moments of intermittency, which is often the subject of controverses, is justified and (re-)derived from the general assumption of multi-Poissonian statistical noise in the production of particles at high-energy. Correction factors for the horizontal vs. Vertical analyses are derived in general cases, including the factorial multi-bin correlation moments

A proposed NSLS x-ray ring upgrade using B factory technology

International Nuclear Information System (INIS)

Blum, E.B.

1995-01-01

A proposed upgrade to the NSLS X-Ray Ring is described that will allow the storage of a 2.4 A. 3 GeV electron beam using technology developed for the PEP-II B factory at SLAC. In this configuration, a peak flux of greater than 10 16 photons/sec/0.1% bandwidth/5 mrad will be produced. The four existing 53 MHz RF cavities will be replaced with eight 476 MHz cavities. Two 952 MHz cavities will also be used to lengthen the bunch, increasing the Touschek life-time. A copper vacuum chamber will be needed to absorb the increased synchrotron radiation and a feedback system may be needed to prevent multi-bunch instabilities

The key microorganisms for anaerobic degradation of pentachlorophenol in paddy soil as revealed by stable isotope probing

Energy Technology Data Exchange (ETDEWEB)

Tong, Hui [Guangdong Key Laboratory of Agricultural Environment Pollution Integrated Control, Guangdong Institute of Eco-Environmental and Soil Sciences, Guangzhou 510650 (China); Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Liu, Chengshuai [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550009 (China); Li, Fangbai, E-mail: cefbli@soil.gd.cn [Guangdong Key Laboratory of Agricultural Environment Pollution Integrated Control, Guangdong Institute of Eco-Environmental and Soil Sciences, Guangzhou 510650 (China); Luo, Chunling [Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Chen, Manjia; Hu, Min [Guangdong Key Laboratory of Agricultural Environment Pollution Integrated Control, Guangdong Institute of Eco-Environmental and Soil Sciences, Guangzhou 510650 (China)

2015-11-15

Highlights: • SIP suggested that Dechloromonas can mineralize PCP in soil. • Methanosaeta and Methanocella acquired PCP-derived carbon. • Lactate enhanced microbial degradation of PCP in soil. - Abstract: Pentachlorophenol (PCP) is a common residual persistent pesticide in paddy soil and has resulted in harmful effect on soil ecosystem. The anaerobic microbial transformation of PCP, therefore, has been received much attentions, especially the functional microbial communities for the reductive transformation. However, the key functional microorganisms for PCP mineralization in the paddy soil still remain unknown. In this work, DNA-based stable isotope probing (SIP) was applied to explore the key microorganisms responsible for PCP mineralization in paddy soil. The SIP results indicated that the dominant bacteria responsible for PCP biodegradation belonged to the genus Dechloromonas of the class β-Proteobacteria. In addition, the increased production of {sup 13}CH{sub 4} and {sup 13}CO{sub 2} indicated that the addition of lactate enhanced the rate of biodegradation and mineralization of PCP. Two archaea classified as the genera of Methanosaeta and Methanocella of class Methanobacteria were enriched in the heavy fraction when with lactate, whereas no archaea was detected in the absence of lactate. These findings provide direct evidence for the species of bacteria and archaea responsible for anaerobic PCP or its breakdown products mineralization and reveal a new insight into the microorganisms linked with PCP degradation in paddy soil.

The key microorganisms for anaerobic degradation of pentachlorophenol in paddy soil as revealed by stable isotope probing

International Nuclear Information System (INIS)

Tong, Hui; Liu, Chengshuai; Li, Fangbai; Luo, Chunling; Chen, Manjia; Hu, Min

2015-01-01

Highlights: • SIP suggested that Dechloromonas can mineralize PCP in soil. • Methanosaeta and Methanocella acquired PCP-derived carbon. • Lactate enhanced microbial degradation of PCP in soil. - Abstract: Pentachlorophenol (PCP) is a common residual persistent pesticide in paddy soil and has resulted in harmful effect on soil ecosystem. The anaerobic microbial transformation of PCP, therefore, has been received much attentions, especially the functional microbial communities for the reductive transformation. However, the key functional microorganisms for PCP mineralization in the paddy soil still remain unknown. In this work, DNA-based stable isotope probing (SIP) was applied to explore the key microorganisms responsible for PCP mineralization in paddy soil. The SIP results indicated that the dominant bacteria responsible for PCP biodegradation belonged to the genus Dechloromonas of the class β-Proteobacteria. In addition, the increased production of 13 CH 4 and 13 CO 2 indicated that the addition of lactate enhanced the rate of biodegradation and mineralization of PCP. Two archaea classified as the genera of Methanosaeta and Methanocella of class Methanobacteria were enriched in the heavy fraction when with lactate, whereas no archaea was detected in the absence of lactate. These findings provide direct evidence for the species of bacteria and archaea responsible for anaerobic PCP or its breakdown products mineralization and reveal a new insight into the microorganisms linked with PCP degradation in paddy soil

A Profile-Based Framework for Factorial Similarity and the Congruence Coefficient.

Science.gov (United States)

Hartley, Anselma G; Furr, R Michael

2017-01-01

We present a novel profile-based framework for understanding factorial similarity in the context of exploratory factor analysis in general, and for understanding the congruence coefficient (a commonly used index of factor similarity) specifically. First, we introduce the profile-based framework articulating factorial similarity in terms of 3 intuitive components: general saturation similarity, differential saturation similarity, and configural similarity. We then articulate the congruence coefficient in terms of these components, along with 2 additional profile-based components, and we explain how these components resolve ambiguities that can be-and are-found when using the congruence coefficient. Finally, we present secondary analyses revealing that profile-based components of factorial are indeed linked to experts' actual evaluations of factorial similarity. Overall, the profile-based approach we present offers new insights into the ways in which researchers can examine factor similarity and holds the potential to enhance researchers' ability to understand the congruence coefficient.

Physics opportunities for a B Factory

International Nuclear Information System (INIS)

Quinn, H.R.

1992-02-01

In the short time allotted for this talk it is not possible to review all the physics opportunities offered by a B Factory. I focus on the physics of CP Violation and the resulting tests of the Standard Model

Benthic carbonate factories of the Phanerozoic

NARCIS (Netherlands)

Schlager, W.

2003-01-01

Marine carbonate precipitation occurs in three basic modes: abiotic (or quasi-abiotic), biotically induced, and biotically controlled. On a geologic scale, these precipitation modes combine to form three carbonate production systems, or "factories" in the benthic environment: (1) tropical

Bifunctional sensor of pentachlorophenol and copper ions based on nanostructured hybrid films of humic acid and exfoliated layered double hydroxide via a facile layer-by-layer assembly

International Nuclear Information System (INIS)

Yuan, Shuang; Peng, Dinghua; Hu, Xianluo; Gong, Jingming

2013-01-01

Graphical abstract: -- Highlights: •A new highly sensitive bifunctional electrochemical sensor developed. •As-prepared sensor fabricated by alternate assembly of HA and exfoliated LDH nanosheets. •Such a newly designed sensor combining the individual properties of HA and LDH nanosheets. •Simultaneous determination of pentachlorophenol and copper ions achieved. •Practical applications demonstrated in water samples. -- Abstract: A new, highly sensitive bifunctional electrochemical sensor for the simultaneous determination of pentachlorophenol (PCP) and copper ions (Cu 2+ ) has been developed, where organic–inorganic hybrid ultrathin films were fabricated by alternate assembly of humic acid (HA) and exfoliated Mg–Al-layered double hydroxide (LDH) nanosheets onto ITO substrates via a layer-by-layer (LBL) approach. The multilayer films were then characterized by means of UV–vis spectrometry, scanning electron microscopy (SEM), and atomic force microscope (AFM). These films were found to have a relatively smooth surface with almost equal amounts of HA incorporated in each cycle. Its electrochemical performance was systematically investigated. Our results demonstrate that such a newly designed (LDH/HA) n multilayer films, combining the individual properties of HA (dual recognition ability for organic herbicides and metal ions) together with LDH nanosheets (a rigid inorganic matrix), can be applied to the simultaneous analysis of PCP and Cu(II) without interference from each other. The LBL assembled nanoarchitectures were further investigated by X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR), which provides insight for bifunctional sensing behavior. Under the optimized conditions, the detection limit was found to be as low as 0.4 nM PCP, well below the guideline value of PCP in drinking water (3.7 nM) set by the United States Environmental Protection Agency (U.S. EPA), and 2.0 nM Cu 2+ , much below the guideline value (2.0 mg L −1

Design Learning of Teaching Factory in Mechanical Engineering

Science.gov (United States)

Putra, R. C.; Kusumah, I. H.; Komaro, M.; Rahayu, Y.; Asfiyanur, E. P.

2018-02-01

The industrial world that is the target of the process and learning outcomes of vocational high school (SMK) has its own character and nuance. Therefore, vocational education institutions in the learning process should be able to make the appropriate learning approach and in accordance with the industrial world. One approach to learning that is based on production and learning in the world of work is by industry-based learning or known as Teaching Factory, where in this model apply learning that involves direct students in goods or service activities are expected to have the quality so it is worth selling and accepted by consumers. The method used is descriptive approach. The purpose of this research is to get the design of the teaching factory based on the competency requirements of the graduates of the spouse industry, especially in the engineering department. The results of this study is expected to be one of the choice of model factory teaching in the field of machinery engineering in accordance with the products and competencies of the graduates that the industry needs.

An asymmetric B factory based on PEP

Energy Technology Data Exchange (ETDEWEB)

1991-02-01

In this report we describe a design for a high-luminosity Asymmetric B Factory to be built in the PEP tunnel on the SLAC site. This proposal, a collaborative effort SLAC, LBL, and LLNL, is the culmination of more than two years of effort aimed at the design and construction of an asymmetric e{sup +}e{sup {minus}} collider capable of achieving a luminosity of L = 3 {times} 10{sup 33} cm{sup {minus}2} s{sup {minus}1}. The configuration adopted utilizes two storage rings, and electron ring operating at 9 GeV and a positron ring at 3.1 GeV, each with a circumference of 2200 m. The high-energy ring is an upgrade of the PEP storage ring at SLAC; all PEP magnets and most power supplies will be reused. The upgrade consists primarily of replacing the PEP vacuum chamber and RF system with newly designed versions optimized for the high-current environment of the B Factory. The low-energy ring will be newly constructed and will be situated atop the high-energy ring in the PEP tunnel. Utilities already installed in the PEP tunnel are largely sufficient to operate the two B Factory storage rings.

Industrial systems biology of Saccharomyces cerevisiae enables novel succinic acid cell factory.

Directory of Open Access Journals (Sweden)

José Manuel Otero

Full Text Available Saccharomyces cerevisiae is the most well characterized eukaryote, the preferred microbial cell factory for the largest industrial biotechnology product (bioethanol, and a robust commerically compatible scaffold to be exploitted for diverse chemical production. Succinic acid is a highly sought after added-value chemical for which there is no native pre-disposition for production and accmulation in S. cerevisiae. The genome-scale metabolic network reconstruction of S. cerevisiae enabled in silico gene deletion predictions using an evolutionary programming method to couple biomass and succinate production. Glycine and serine, both essential amino acids required for biomass formation, are formed from both glycolytic and TCA cycle intermediates. Succinate formation results from the isocitrate lyase catalyzed conversion of isocitrate, and from the α-keto-glutarate dehydrogenase catalyzed conversion of α-keto-glutarate. Succinate is subsequently depleted by the succinate dehydrogenase complex. The metabolic engineering strategy identified included deletion of the primary succinate consuming reaction, Sdh3p, and interruption of glycolysis derived serine by deletion of 3-phosphoglycerate dehydrogenase, Ser3p/Ser33p. Pursuing these targets, a multi-gene deletion strain was constructed, and directed evolution with selection used to identify a succinate producing mutant. Physiological characterization coupled with integrated data analysis of transcriptome data in the metabolically engineered strain were used to identify 2(nd-round metabolic engineering targets. The resulting strain represents a 30-fold improvement in succinate titer, and a 43-fold improvement in succinate yield on biomass, with only a 2.8-fold decrease in the specific growth rate compared to the reference strain. Intuitive genetic targets for either over-expression or interruption of succinate producing or consuming pathways, respectively, do not lead to increased succinate. Rather, we

The endemiology of helicobacter pylorus infection and gastro-intestinal disease in mine and related factory workers of Tongling city, Anhui

International Nuclear Information System (INIS)

He Xiangyang; Jiang Zhonglin; Yang Shunqi; Mei Yanyan; Wen Qin; Cheng Yingzi; Wang Jianmiao

2006-01-01

Objective: To investigate the endemiology of H. pylorus infection and related gastro-intestinal disease in mine and factory workers of Tong-Ling area. Methods: 14 C-urea breath test, serum IgG and cytotoxin-producing H. pylorus antibodies determinations were performed in 1076 randomly selected adults among the mine and related factory workers in Tong - Ling area. Gastroscopy was done in 156 subjects (cytotoxin-producing H. pylorus antibody CagA-HP positive 108 and Cag-HP negative 48). Results: Seven hundred and twenty-one subjects of the 1076 (67.0%) examined were positive with the 14 C-urea breath and serological tests, among which 350 (48.5% of the 721 ) were Cag-HP positive. Factors affecting positiveness of HP infection were in the order of: working environment, gastro-intestinal symptoms, past history, vocation, age, history of previous contact, sex and non- hygiene life-style. Conclusion: The HP infection rate in Tong-Ling area was slightly higher than nationwide but with a lower CagA - HP positive rate. HP infection was mostly related to the working environment and life-style. (authors)

Model Pembelajaran Teaching Factory untuk Meningkatkan Kompetensi Siswa dalam Mata Pelajaran Produktif

OpenAIRE

Hidayat M., Dadang

2011-01-01

: The Model of Teaching Factory to Promote Students' Competence in Productive Sub­jects. The present article reports on a research project using the model of six-step teaching factory known as Model TF-6M. This R & D project was aimed at promoting students' competences regarding productive subjects at Vocational Schools. The six steps in the teaching factory model include receiving orders, ana­lyzing orders, stating readiness in executing orders, execution of orders, doing quality control, an...

Studies on capacity management for factories of nuclear fuel for research reactors

International Nuclear Information System (INIS)

Negro, Miguel Luiz Miotto; Durazzo, Michelangelo; Mesquita, Marco Aurélio de; Carvalho, Elita Fontenele Urano de; Andrade, Delvonei Alves de; Universidade de São Paulo

2017-01-01

The use and the power of nuclear reactors for research and materials testing is increasing worldwide. That implies the demand for nuclear fuel for this kind of reactors is rising. Thus, the production facilities of this kind of fuel need reliable guidance on how to augment their production in order to meet the increasing demand efficiently, safely and keeping good quality. Focus is given to factories that produce plate type fuel elements loaded with LEU U_3Si_2-Al fuel, which are typically used in nuclear research reactors. Of the various production routes for this kind of fuel, we chose the route which uses hydrolysis of uranium hexafluoride. Raising the capacity of this kind of plants faces several problems, especially regarding safety against nuclear criticality. Some of these problems are briefly addressed. The new issue of the paper is the application of knowledge from the area of production administration to the fabrication of nuclear fuel for research reactors. A specific method for the increase in production capacity is proposed. That method was tested by means of discrete event simulation. The data were collected from the nuclear fuel factory at IPEN. The results indicated the proposed method achieved its goal as well as ways of raising production capacity in up to 50%. (author). (author)

HOM [higher order mode] losses at the IR [interaction region] of the B-factory

International Nuclear Information System (INIS)

Heifets, S.

1990-08-01

Masking at the interaction region (IR) will presumably reduce the synchrotron radiation background in the detector. One possible layout of the IR for B-factory shows a rather complicated system of masks. A bunch passing each mask will generate RF waves. These waves (called usually higher order modes, HOM-s) will be absorbed in the beam pipe wall producing additional heating and, interacting with the beam, kicking particles in the radial and azimuthal directions. This may change the bunch motion and its emittance. These effects are estimated in the present note

Water and energy saving at Dutch pastry factory Verkade; Koekjesbakker bespaart water en energie

Energy Technology Data Exchange (ETDEWEB)

Van Gool, J. (ed.)

2003-11-01

A pastry factory (Verkade in Zaandam, Netherlands) produces 27,000 ton of cookies and biscuits, using 2.2 million m{sup 3} natural gas, 6.7 million kWh and 67,000 m{sup 3} water. By means of new cooling systems a considerable amount of energy and water is saved. [Dutch] Verkade in Zaandam produceert jaarlijks 27.000 ton biscuit, waarvoor 2,2 miljoen m{sup 3} gas, 6,7 miljoen kilowattuur en 67.000 m{sup 3} water nodig is. Dankzij vernieuwde koelsystemen is het water- en energieverbruik flink gedaald.

Virtual Factory Framework for Supporting Production Planning and Control.

Science.gov (United States)

Kibira, Deogratias; Shao, Guodong

2017-01-01

Developing optimal production plans for smart manufacturing systems is challenging because shop floor events change dynamically. A virtual factory incorporating engineering tools, simulation, and optimization generates and communicates performance data to guide wise decision making for different control levels. This paper describes such a platform specifically for production planning. We also discuss verification and validation of the constituent models. A case study of a machine shop is used to demonstrate data generation for production planning in a virtual factory.

Factorial versus Typological Models: A Comparison of Methods for Personality Data

Science.gov (United States)

von Davier, Matthias; Naemi, Bobby; Roberts, Richard D.

2012-01-01

This article describes an exploration of the distinction between typological and factorial latent variables in the domain of personality theory. Traditionally, many personality variables have been considered to be factorial in nature, even though there are examples of typological constructs dating back to Hippocrates. Recently, some…

METABOLIC MODELLING IN THE DEVELOPMENT OF CELL FACTORIES BY SYNTHETIC BIOLOGY

Directory of Open Access Journals (Sweden)

Paula Jouhten

2012-10-01

Full Text Available Cell factories are commonly microbial organisms utilized for bioconversion of renewable resources to bulk or high value chemicals. Introduction of novel production pathways in chassis strains is the core of the development of cell factories by synthetic biology. Synthetic biology aims to create novel biological functions and systems not found in nature by combining biology with engineering. The workflow of the development of novel cell factories with synthetic biology is ideally linear which will be attainable with the quantitative engineering approach, high-quality predictive models, and libraries of well-characterized parts. Different types of metabolic models, mathematical representations of metabolism and its components, enzymes and metabolites, are useful in particular phases of the synthetic biology workflow. In this minireview, the role of metabolic modelling in synthetic biology will be discussed with a review of current status of compatible methods and models for the in silico design and quantitative evaluation of a cell factory.

High-current proton accelerators-meson factories

International Nuclear Information System (INIS)

Dmitrievskij, V.P.

1979-01-01

A possibility of usage of accelerators of neutron as well as meson factories is considered. Parameters of linear and cyclic accelerators are given, which are employed as meson factories and as base for developing intense neutron generators. It is emphasized that the principal aim of developing neutron generators on the base of high current proton accelerators is production of intense neutron fluxes with a present energy spectrum. Production of tens-and-hundreds milliampere currents at the energy of 800-1000 MeV is considered at present for two types of accelerating facilities viz. linear accelerators under continuous operating conditions and cyclotrons with strong focusing. Quantitative evaluations of developing high-efficiency linear and cyclic accelerators are considered. The basic parameters of an ccelerating complex are given, viz. linear accelerator-injector and 800 MeV isochronous cyclotron. The main problems associated with their realization are listed [ru

Mobile monitoring and embedded control system for factory environment.

Science.gov (United States)

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-12-17

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones.

Mobile Monitoring and Embedded Control System for Factory Environment

Science.gov (United States)

Lian, Kuang-Yow; Hsiao, Sung-Jung; Sung, Wen-Tsai

2013-01-01

This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine) core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT) approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC) technology is used to carry out the actual electricity load experiments using smart phones. PMID:24351642

Mobile Monitoring and Embedded Control System for Factory Environment

Directory of Open Access Journals (Sweden)

Kuang-Yow Lian

2013-12-01

Full Text Available This paper proposes a real-time method to carry out the monitoring of factory zone temperatures, humidity and air quality using smart phones. At the same time, the system detects possible flames, and analyzes and monitors electrical load. The monitoring also includes detecting the vibrations of operating machinery in the factory area. The research proposes using ZigBee and Wi-Fi protocol intelligent monitoring system integration within the entire plant framework. The sensors on the factory site deliver messages and real-time sensing data to an integrated embedded systems via the ZigBee protocol. The integrated embedded system is built by the open-source 32-bit ARM (Advanced RISC Machine core Arduino Due module, where the network control codes are built in for the ARM chipset integrated controller. The intelligent integrated controller is able to instantly provide numerical analysis results according to the received data from the ZigBee sensors. The Android APP and web-based platform are used to show measurement results. The built-up system will transfer these results to a specified cloud device using the TCP/IP protocol. Finally, the Fast Fourier Transform (FFT approach is used to analyze the power loads in the factory zones. Moreover, Near Field Communication (NFC technology is used to carry out the actual electricity load experiments using smart phones.

Technology transfer, education, localization and R and D in factory operation of Indonesia; Kaigai seisankyoten (indoneshia) kara mita gijutsuteni, jinzaiikusei, genchijinka, soshite kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Masao, Ikeda

1999-01-05

The author was on loan to a factory producing sodium glutamate, the Indonesia Ajinomoto located at Jawa province, east Indonesia, during 5 years from 1992, and had a chance to operate the factory. In this paper, an experience of the author, details of the Indonesia Ajinomoto from the operation beginning and comments of the author are described. As localization of department directors, factory directors, and workers of production sites are improving, a Japanese to be sent there plays two roles of as a top manager connecting with the parent company, and as a researcher fellow connecting with a Japan research institute. As the Indonesia Ajinomoto locates at a small local city, it is operated towards the Indonesia society including local administration. It is very important for progressing as a foreign enterprise in the Indonesia that faces the political confusion and national opposition of the Indonesian and the overseas Chinese. (NEDO)

Temporal trends for dioxins-related agrochemicals in sediments in a large-scale rice-producing area, Niigata, Japan

Energy Technology Data Exchange (ETDEWEB)

Sakai, Mizuki; Hideo, Kajihara [Niigata Univ. (Japan). Graduate School of Science and Technology; Hiroaki, Muto; Yukio, Takahashi [Niigata Univ. (Japan). Faculty of Engineering

2004-09-15

Japanese people have historically eaten rice as the main grain constituent in their diet. In the past 50 years, a larger amount of agrochemicals have been applied to Japanese rice fields to increase rice production. Masunaga et al. reported that common Japanese agrochemicals such as pentachlorophenol (PCP) and chloronitrophen (CNP) used in rice fields in the past contain dioxins as impurities. Since Niigata Plain is the largest rice-producing area in Japan, the soil and/or sediment in the lower basin in Niigata Plain could be highly polluted. In the previous study, we measured the age of a sediment core and the amount of dioxins (PCDD/DFs) in Toyano Lagoon and estimated the historical trend and the sources of dioxin. Most of the sources of dioxin in Toyano Lagoon sediment were PCP and CNP. The aims of this work are to quantify the extent, clarify the historical trends of CNP and PCP pollution in the Toyano Lagoon sediment and consider the interrelation between them.

Simultaneous determination of 2,4,6-trichlorophenol and pentachlorophenol based on poly(Rhodamine B)/graphene oxide/multiwalled carbon nanotubes composite film modified electrode

International Nuclear Information System (INIS)

Zhu, Xiaolin; Zhang, Kexin; Lu, Nan; Yuan, Xing

2016-01-01

Graphical abstract: A poly(Rhodamine B)/graphene oxide/multiwalled carbon nanotubes composite film modified glassy carbon electrode (PRhB/GO/MWCNTs/GCE) was developed for the simultaneous determination of 2,4,6-trichlorophenol (2,4,6-TCP) and pentachlorophenol (PCP) without any pretreatment. - Highlights: • A poly(RhB)/graphene oxide/multiwalled carbon nanotubes composite was synthesized. • The composite film was characterized by SEM, XRD, EIS and Raman spectroscopy. • The simultaneous electrochemical determination of 2,4,6-TCP and PCP was realized. • The electrode showed high sensitivity, excellent reproducibility and good stability. • The electrode was used to determine 2,4,6-TCP and PCP in practical water samples. - Abstract: In the present study, a poly(Rhodamine B)/graphene oxide/multiwalled carbon nanotubes nanocomposite modified glass carbon electrode (PRhB/GO/MWCNTs/GCE) was developed for the simultaneous determination of 2,4,6-trichlorophenol (2,4,6-TCP) and pentachlorophenol (PCP). The PRhB/GO/MWCNTs film was extensively characterized by emission scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy and electrochemical impedance spectroscopy (EIS). The electrochemical behaviors of 2,4,6-TCP and PCP were investigated by cyclic voltammetry, linear sweep voltammetry and differential pulse voltammetry. Due to the synergistic effect, the PRhB/GO/MWCNTs/GCE significantly facilitated the simultaneous electro-oxidation of 2,4,6-TCP and PCP with peak potential difference of 160 mV and enhanced oxidation currents. Under optimum conditions, the oxidation current of 2,4,6-TCP was linear to its concentration in the ranges of 4.0 × 10"−"9 to 1.0 × 10"−"7 M and 1.0 × 10"−"7 to 1.0 × 10"−"4 M with the detection limit (S/N = 3) of 8.0 × 10"−"1"0 M. And the linear concentration ranges for PCP were 2.0 × 10"−"9 to 1.0 × 10"−"7 M and 1.0 × 10"−"7 to 9.0 × 10"−"5 M with the detection limit of 5.0 × 10"−"1"0 M

Simultaneous determination of 2,4,6-trichlorophenol and pentachlorophenol based on poly(Rhodamine B)/graphene oxide/multiwalled carbon nanotubes composite film modified electrode

Energy Technology Data Exchange (ETDEWEB)

Zhu, Xiaolin; Zhang, Kexin; Lu, Nan; Yuan, Xing, E-mail: yuanx@nenu.edu.cn

2016-01-15

Graphical abstract: A poly(Rhodamine B)/graphene oxide/multiwalled carbon nanotubes composite film modified glassy carbon electrode (PRhB/GO/MWCNTs/GCE) was developed for the simultaneous determination of 2,4,6-trichlorophenol (2,4,6-TCP) and pentachlorophenol (PCP) without any pretreatment. - Highlights: • A poly(RhB)/graphene oxide/multiwalled carbon nanotubes composite was synthesized. • The composite film was characterized by SEM, XRD, EIS and Raman spectroscopy. • The simultaneous electrochemical determination of 2,4,6-TCP and PCP was realized. • The electrode showed high sensitivity, excellent reproducibility and good stability. • The electrode was used to determine 2,4,6-TCP and PCP in practical water samples. - Abstract: In the present study, a poly(Rhodamine B)/graphene oxide/multiwalled carbon nanotubes nanocomposite modified glass carbon electrode (PRhB/GO/MWCNTs/GCE) was developed for the simultaneous determination of 2,4,6-trichlorophenol (2,4,6-TCP) and pentachlorophenol (PCP). The PRhB/GO/MWCNTs film was extensively characterized by emission scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy and electrochemical impedance spectroscopy (EIS). The electrochemical behaviors of 2,4,6-TCP and PCP were investigated by cyclic voltammetry, linear sweep voltammetry and differential pulse voltammetry. Due to the synergistic effect, the PRhB/GO/MWCNTs/GCE significantly facilitated the simultaneous electro-oxidation of 2,4,6-TCP and PCP with peak potential difference of 160 mV and enhanced oxidation currents. Under optimum conditions, the oxidation current of 2,4,6-TCP was linear to its concentration in the ranges of 4.0 × 10{sup −9} to 1.0 × 10{sup −7} M and 1.0 × 10{sup −7} to 1.0 × 10{sup −4} M with the detection limit (S/N = 3) of 8.0 × 10{sup −10} M. And the linear concentration ranges for PCP were 2.0 × 10{sup −9} to 1.0 × 10{sup −7} M and 1.0 × 10{sup −7} to 9.0 × 10{sup −5} M with the

Success and Unionism among Indonesian Factory Workers in Tangerang and Cikarang

Directory of Open Access Journals (Sweden)

Giacomo Tabacco

2014-11-01

Full Text Available The article discusses the meaning attached to the ideas of success and personal development among a group of migrant factory workers and unionists in two satellite towns on the outskirts of Jakarta, Indonesia. In particular, it looks closely at the life experiences of a factory worker, two unemployed migrants and a union leader and it illustrates their narratives of hard work and “luck” in the quest for personal growth. It explores the various social networks that sustain life among factory workers while focusing specifically on the role of unionism as a symbolic and material resource to navigate through the precariousness and hardship of salary work and unemployment.

Assessment of the rhizosphere competency and pentachlorophenol-metabolizing activity of a pesticide-degrading strain of Trichoderma harzianum introduced into the root zone of corn seedlings.

Science.gov (United States)

Rigot, Jerĵme; Matsumura, Fumio

2002-05-01

To develop a dependable approach to introduce laboratory selected, pesticide-degrading microorganisms into soil environments for the purpose of in situ bioremediation, we tested the possibility of utilizing plant rhizospheres as the vehicle. We first established the rhizosphere competency of a strain of the soil fungus Trichoderma harzianum, a biocontrol species well studied by plant pathologists to colonize plant rhizosphere in many parts of the world. The strain we chose, T.h.2023 is resistant to many fungicides, and it has been shown to metabolize several pesticides. Second, we found that it readily metabolized pentachlorophenol (PCP), which is quickly and stochiometrically converted to pentachloroanisole (PCA) in liquid culture. Taking advantage of this specific feature, we have developed a sensitive metabolic marker approach that allowed us to monitor for the continuous presence and activity of this fungal strain in the corn rhizosphere soil in situ over time.

Kaon factories

International Nuclear Information System (INIS)

Craddock, M.K.

1983-03-01

Kaon factories would provide beams 100-1000 times more intense than those available from present accelerators in the 10-30 GeV range. More intense or cleaner secondary beams of kaons, antiprotons and neutrinos would be of particular interest for high precision experiments and studies of rare processes in both particle and nuclear physics, e.g. symmetry violations in K-decay, neutrino scattering, meson and baryon spectroscopy, hypernuclei, exotic atoms, K + studies of nuclear density and resonance propagation in nuclei. The various accelerators proposed include both fast-cycling synchrotrons providing 100 μA proton beams at 15 to 32 GeV and superconducting isochronous ring cyclotrons giving 100-400 μA at up to 15 GeV. This paper describes these designs and the various technical problems associated with them

ASME factory authorization system and the situation in Japan

International Nuclear Information System (INIS)

Futagawa, Kiyoshi

1978-01-01

Since about three or four years ago, the enterprises of machinery, iron and steel and welding materials in Japan are paying much attention to the acquisition of ASME (American Society of Mechanical Engineers) certificates or authorization to stamp the code symbols. That is, over 70 factories in Japan have undergone ASME examination, and consequently acquired the authorization or certificates. Such authorization is divided into over 20 kinds, of which about 7 are possessed by the companies in Japan. In nuclear field, the kinds of authorization are N (nuclear vessel), NPT (nuclear vessel parts), NV (nuclear vessel safety valve), and MM (material manufacturing). In non-nuclear fields, they are S (power boilers), U (pressure vessels, in Div. 1), and U2 (pressure vessels in Div. 2). The following matters are described: ASME setup, authorization procedures of ASME for factories, the kinds of authorization, factories in Japan holding the authorization or certificates, and renewal of the authorization. (Mori, K.)

An operator-console system of the photon factory injector LINAC

International Nuclear Information System (INIS)

Nakahara, Kazuo; Abe, Isamu; Furukawa, Kazuro; Kamikubota, Norihiko

1990-01-01

It is sometimes difficult to unify accelerator control systems constructed in different ways. This problem arose in unifying the control systems of the injector linac and the storage ring making up the Photon Factory of the National Laboratory for High Energy Physics. One easy approach is to unify only the operator consoles; the unified console is connected to both separate control systems using gateways. The operator-console system of the Photon Factory injector linac has been designed and constructed using this approach. It consists of several workstations interconnected via a local-area network, a gateway to the old linac control network and a CATV system for the real-time display of the accelerator status. In this way the linac will be controlled from the control center of the Photon Factory storage ring. (orig.)

Genome Sequence of Talaromyces atroroseus, Which Produces Red Colorants for the Food Industry

DEFF Research Database (Denmark)

Thrane, Ulf; Rasmussen, Kasper Bøwig; Petersen, Bent

2017-01-01

Talaromyces atroroseus is a known producer of Monascus colorants suitable for the food industry. Furthermore, genetic tools have been established that facilitate elucidation and engineering of its biosynthetic pathways. Here, we report the draft genome of a potential fungal cell factory, T...

Anaerobic biodegradation of pentachlorophenol in a fixed-film reactor inoculated with polluted sediment from Santos-Sao Vicente Estuary, Brazil

Energy Technology Data Exchange (ETDEWEB)

Saia, F.T.; Damianovic, M.H.R.Z.; Cattony, E.B.M.; Brucha, G.; Foresti, E. [Sao Paulo Univ., Sao Carlos (Brazil). Lab. of Biological Processes; Vazoller, R.F. [Sao Paulo Univ., Sao Paulo (Brazil). Lab. of Environmental Microbiology

2007-06-15

This paper discusses the results of pentachlorophenol (PCP) anaerobic biodegradation in a horizontal-flow anaerobic immobilized biomass (HAIB) reactor operated under methanogenic and halophylic conditions. The system was inoculated with autochthonous microorganisms taken from a site in the Santos-Sao Vicente Estuary (state of Sao Paulo, Brazil) severely contaminated with PCP, phenolic compounds, polychlorinated biphenyls, polycyclic aromatic hydrocarbons, and heavy metals. The inoculum was previously enriched for methanogenesis activity by changing glucose concentrations and under halophylic condition. PCP was added to the HAIB reactor as sodium salt (NaPCP) at an initial concentration of 5 mg l{sup -1} and increased to 13, 15, and 21 mg l{sup -1}. Organic matter removal efficiency ranged from 77 to 100%. PCP removal efficiency was 100%. Denaturing gradient gel electrophoresis profile showed changes in the structure of Bacteria domain, which was associated with NaPCP and glucose amendments. The diversity of Archaea remained unaltered during the different phases. Scanning electron microscope examinations showed that cells morphologically resembling Methanosarcina and Methanosaeta predominated in the biofilm. These cells were detected by fluorescence in situ hybridization with the Methanosarcinales (MSMX860) specific probe. The results are of great importance in planning the estuary's restoration by using anaerobic technology and autochthonous microorganisms for bioremediation. (orig.)

Burnout Factories: The Challenge of Retaining Great Teachers in Charter Schools

Science.gov (United States)

Fusco, Mark

2017-01-01

In its well-intentioned effort to create alternatives to public school dropout factories, the charter school sector has created teacher burnout factories. But it does not have to be this way. Charter schools can continue to maintain high standards while creating a more sustainable work environment for teachers. This article examines the teacher…

Advanced factory managing technology. Sentan kojo kanri gijuts

Energy Technology Data Exchange (ETDEWEB)

Matsushita, M [Daicel Chemical Industries, Ltd., Osaka (Japan)

1994-04-05

With respect to a managing technology of advanced factories in the Japanese chemical industry, this paper enumerates the following three examples to discuss the ways the future factory technologies should be: operation techniques and problems in a newest ethylene plant, operation supports and facility control in chemical factories, and CIM structuring in beer breweries. The paper describes the operation techniques in an ethylene plant that are broken down into the following: measures for safety and material diversification, environment preservation, means to minimize the required labor, adoption of multi-variables, non-interference control technology for ethylene-propylene columns, and operation techniques that have been introduced with such a new technique as an integrated instrumentation room equipped with a gas leakage detection system. Structuring of CIM in the cited beer brewery has followed the transition of IE-TQC-JIT-FMS-CIM. Although a beer brewery may give somewhat different image from an ordinary chemical plant, the beer brewing process resembles a chemical plant in that it operates reacting machines in batch multiple tanks, and uses instrumentations and controllers using sensors. The key point in the future development is an organic link between market fluctuation and production activities. 1 fig.

Argonne Tau-charm factory collider design study

International Nuclear Information System (INIS)

Teng, L.C.; Crosbie, E.A.; Norem, J.

1995-01-01

The design approach and design principles for a Tau-charm Factory at Argonne were studied. These studies led to a set of preliminary parameters and tentative component features as presented in this paper

Factorial and reduced K-means reconsidered

NARCIS (Netherlands)

Timmerman, Marieke E.; Ceulemans, Eva; Kiers, Henk A. L.; Vichi, Maurizio

2010-01-01

Factorial K-means analysis (FKM) and Reduced K-means analysis (RKM) are clustering methods that aim at simultaneously achieving a clustering of the objects and a dimension reduction of the variables. Because a comprehensive comparison between FKM and RKM is lacking in the literature so far, a

Muon Acceleration: Neutrino Factory and Beyond

Energy Technology Data Exchange (ETDEWEB)

Bogacz, Alex [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2018-03-01

We summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory and extendable to Higgs Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the complexity of the cooling systems and the acceptance of the accelerator complex. To ensure adequate survival for the short-lived muons, acceleration must occur at high average gradient. The need for large transverse and longitudinal acceptances drives the design of the acceleration system to an initially low RF frequency, e.g., 325 MHz, which is then increased to 650 MHz as the transverse size shrinks with increasing energy. High-gradient normal conducting RF cavities at these frequencies require extremely high peak-power RF sources. Hence superconducting RF (SRF) cavities are chosen. We consider an SRF-efficient design based on a multi-pass (4.5) ?dogbone? RLA, extendable to multi-pass FFAG-like arcs.

CONFOUNDING STRUCTURE OF TWO-LEVEL NONREGULAR FACTORIAL DESIGNS

Institute of Scientific and Technical Information of China (English)

Ren Junbai

2012-01-01

In design theory,the alias structure of regular fractional factorial designs is elegantly described with group theory.However,this approach cannot be applied to nonregular designs directly. For an arbitrary nonregular design,a natural question is how to describe the confounding relations between its effects,is there any inner structure similar to regular designs? The aim of this article is to answer this basic question.Using coefficients of indicator function,confounding structure of nonregular fractional factorial designs is obtained as linear constrains on the values of effects.A method to estimate the sparse significant effects in an arbitrary nonregular design is given through an example.

Phenomenology of scaled factorial moments and future approaches for correlation studies

International Nuclear Information System (INIS)

Seibert, D.

1991-01-01

We show that the definitions of the exclusive and inclusive scaled factorial moments are not equivalent, and propose the use of scaled factorial moments that reduce to the exclusive moments in the case of fixed multiplicity. We then present a new derivation of the multiplicity scaling law for scaled factorial moment data. This scaling law seems to hold, independent of collision energy, for events with fixed projectile and target. However, deviations from this scaling law indicate that correlations in S-Au collisions are 30 times as strong as correlations in hadronic collisions. Finally, we discuss 'split-bin' correlation functions, the most useful tool for future investigations of these anomalously strong hadronic correlations. (orig.)

Simulation studies of crystal-photodetector assemblies for the Turkish accelerator center particle factory electromagnetic calorimeter

Energy Technology Data Exchange (ETDEWEB)

Kocak, F., E-mail: fkocak@uludag.edu.tr

2015-07-01

The Turkish Accelerator Center Particle Factory detector will be constructed for the detection of the produced particles from the collision of a 1 GeV electron beam against a 3.6 GeV positron beam. PbWO{sub 4} and CsI(Tl) crystals are considered for the construction of the electromagnetic calorimeter part of the detector. The generated optical photons in these crystals are detected by avalanche or PIN photodiodes. Geant4 simulation code has been used to estimate the energy resolution of the calorimeter for these crystal–photodiode assemblies.

Energy usage in Beet Suger Factories. Sockerfabrikens energianvaendning; En systemstudie

Energy Technology Data Exchange (ETDEWEB)

Feltborg, G

1990-02-01

A computer program has been developed in order to simulate the energy consumption of beet sugar factories, for various plant configurations. The program is divided into five block units: Extraction and Juice purification, Juice concentration, Crystallization, Drying and finally the Power House. Each block consists of different modules, for example, a heat exchanger, an evaporator, a turbine and a dryer. The purpose of this project was to simulate some different system configurations of a sugar factory, whereby both new and previously used process technologies were utilized. The following parts of the process have been particularly emphasized: Power House - gas turbine, waste heat boiler. Drying - low-temperature dryer, steam dryer. Evaporation - vapour recompression. Crystallization - vapour recompression, continuous system. The different plant configurations have been compared to a reference factory, which is designed according to current technology used in a modern and well balanced Swedish factory. The comparisons are based upon the total power consumption as well as the total annual energy costs. Eleven different plant configurations were studied. The maximum power reduction is 36%, relative to the reference factory. The dissertation also contains an experimental study of a low-temperature drying process. The drying characteristics of pressed beet pulp were studied in a specially designed rotary dryer pilot plant. A number of parameters were varied i.e. the solid moisture content, air velocity, temperature and rotational speed. The results are given in terms of an apparent volumetric heat-transfer coefficient, determined from measured data. A mathematical model was established to determine the residence time of the material in the rotary dryer at different air velocities. (45 refs.).

A Fuzzy Collaborative Forecasting Approach for Forecasting the Productivity of a Factory

Directory of Open Access Journals (Sweden)

Yi-Chi Wang

2013-01-01

Full Text Available Productivity is always considered as one of the most basic and important factors to the competitiveness of a factory. For this reason, all factories have sought to enhance productivity. To achieve this goal, we first need to estimate the productivity. However, there is considerable degree of uncertainty in productivity. For this reason, a fuzzy collaborative forecasting approach is proposed in this study to forecast the productivity of a factory. First, a learning model is established to estimate the future productivity. Subsequently, the learning model is converted into three equivalent nonlinear programming problems to be solved from various viewpoints. The fuzzy productivity forecasts by different experts may not be equal and should therefore be aggregated. To this end, the fuzzy intersection and back propagation network approach is applied. The practical example of a dynamic random access memory (DRAM factory is used to evaluate the effectiveness of the proposed methodology.

Preliminary analysis of a target factory for laser fusion

International Nuclear Information System (INIS)

Sherohman, J.W.; Hendricks, C.D.

1980-01-01

An analysis of a target factory leading to the determination of production expressions has provided for the basis of a parametric study. Parameters involving the input and output rate of a process system, processing yield factors, and multiple processing steps and production lines have been used to develop an understanding of their dependence on the rate of target injection for laser fusion. Preliminary results have indicated that a parametric study of this type will be important in the selection of processing methods to be used in the final production scheme of a target factory

Beam transport of PF (Positron Factory) 2.5-GeV linac

International Nuclear Information System (INIS)

Shiraga, Takahiro; Asami, Akira; Suwada, Tsuyoshi; Kobayashi, Hitoshi.

1993-01-01

The beam transport is one of the most important problems in the linac to be used as the injector for the B-FACTORY accelerators. A basic problem of the beam transport is how to correct transport parameters immediately when a klystron becomes off. This is studied with the PF (Positron Factory) 2.5-GeV linac. (author)

The benefits and challenges of sharing glidein factory operations across nine time zones between OSG and CMS

CERN Document Server

Sfiligoi, Igor; Zvada, Marian; Butenas, Ignas; Holzman, Burt; Wuerthwein, Frank Karl; Kreuzer, Peter; Teige, Scott W.; Quick, Robert; Hernandez, Jose M.; Flix Molina, Jose

2012-01-01

OSG has been operating for a few years at UCSD a glideinWMS factory for several scientific communities, including CMS analysis, HCC and GLOW. This setup worked fine, but it had become a single point of failure. OSG thus recently added another instance at Indiana University, serving the same user communities. Similarly, CMS has been operating a glidein factory dedicated to reprocessing activities at Fermilab, with similar results. Recently, CMS decided to host another glidein factory at CERN, to increase the availability of the system, both for analysis, MC and reprocessing jobs. Given the large overlap between this new factory and the three factories in the US, and given that CMS represents a significant fraction of glideins going through the OSG factories, CMS and OSG formed a common operations team that operates all of the above factories. The reasoning behind this arrangement is that most operational issues stem from Grid-related problems, and are very similar for all the factory instances. Solving a probl...

Optimization of wood flour acetylation by factorial design and partial least squares regression

Directory of Open Access Journals (Sweden)

Lisandra M. K. Nadal

2012-01-01

Full Text Available Acetylation was performed to reduce the polarity of wood and increase its compatibility with polymer matrices for the production of composites. These reactions were performed first as a function of acetic acid and anhydride concentration in a mixture catalyzed by sulfuric acid. A concentration of 50%/50% (v/v of acetic acid and anhydride was found to produced the highest conversion rate between the functional groups. After these reactions, the kinetics were investigated by varying times and temperatures using a 3² factorial design, and showed time was the most relevant parameter in determining the conversion of hydroxyl into carbonyl groups.

Synchronous method and engineering tool for the strategic factory planning

OpenAIRE

Abdul Rahman, O.; Jaeger, J.; Constantinescu, C.

2011-01-01

This paper presents the approach to combine two reference methods and engineering tools, for "Factory Performance and Investment Planning«as well as "Value Added Ideal Production Network Planning". The resulted synchronous method aims to support factories in the strategic planning as well as in the network planning. The corresponding engineering tool is employed for assessment planning, sales planning, capacity planning and production costs planning under the consideration of dynamic and stoc...

Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

Directory of Open Access Journals (Sweden)

Sackey, S. M.

2017-05-01

Full Text Available To manage the impact of Industry 4.0 on industrial engineering (IE education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE education in South Africa, making use of existing models of cyber-physical systems and learning factory morphology. In other results, the technical universities are discovered to be more positively disposed, in general terms, to developing an Industry 4.0 learning factory than are the traditional programmes which, with one exception, prefer computational facilities. Of ten universities that offer IE, only one — a traditional programme — has made significant progress towards creating an Industry 4.0 learning factory.

Heuristics comparison for u-shaped assembly line balancing in the apparel factory

Directory of Open Access Journals (Sweden)

Nuchsara Kriengkorakot

2014-06-01

Full Text Available In recent year, many industries have adopted a Just-in-time (JIT approach to manufacturing. One of the important changes resulting from JIT implementation is the replacement of the traditional straight lines with Ushaped assembly lines. The important characteristic of these new configurations is that multiskilled workers perform various tasks of different stations along the production line. This research is to improve the assembly line balancing in apparel factory in case study of T-shirt style 53287. The efficiency of production line was 55.48%, the factory balanced line with the traditional method in straight line. Then, the u-shaped assembly line balancing problem (UALBP is to be performed instead of straight line. By using the heuristics of Maximum Task Time, Minimum Task Time, Maximum Ranked Positional Weight (RPWmax and Greedy Randomized to determine the optimal solutions related to the number of stations and line efficiency. The results indicate that two heuristics have given the good solution which have produced by the use of Maximum Task Time and Greedy Randomized. The minimum number of stations have reduced from 17 stations to 11 stations in UALB and the line efficiency was increased from 55.48% to 85.75%. The U-line configuration frequently improves the line efficiency and has fewer work stations compared to the traditional lines.

Studies on capacity management for factories of nuclear fuel for research reactors

Energy Technology Data Exchange (ETDEWEB)

Negro, Miguel Luiz Miotto; Durazzo, Michelangelo; Mesquita, Marco Aurélio de; Carvalho, Elita Fontenele Urano de; Andrade, Delvonei Alves de, E-mail: mlnegro@ipen.br, E-mail: mdurazzo@ipen.br, E-mail: elitaucf@ipen.br, E-mail: delvonei@ipen.br, E-mail: mamesqui@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Universidade de São Paulo (USP), SP (Brazil). Escola Politécnica. Departamento de Engenharia de Produção

2017-11-01

The use and the power of nuclear reactors for research and materials testing is increasing worldwide. That implies the demand for nuclear fuel for this kind of reactors is rising. Thus, the production facilities of this kind of fuel need reliable guidance on how to augment their production in order to meet the increasing demand efficiently, safely and keeping good quality. Focus is given to factories that produce plate type fuel elements loaded with LEU U{sub 3}Si{sub 2}-Al fuel, which are typically used in nuclear research reactors. Of the various production routes for this kind of fuel, we chose the route which uses hydrolysis of uranium hexafluoride. Raising the capacity of this kind of plants faces several problems, especially regarding safety against nuclear criticality. Some of these problems are briefly addressed. The new issue of the paper is the application of knowledge from the area of production administration to the fabrication of nuclear fuel for research reactors. A specific method for the increase in production capacity is proposed. That method was tested by means of discrete event simulation. The data were collected from the nuclear fuel factory at IPEN. The results indicated the proposed method achieved its goal as well as ways of raising production capacity in up to 50%. (author). (author)

KEKB B-Factory, the luminosity frontier

International Nuclear Information System (INIS)

Oide, Katsunobu

2009-01-01

The experiment at the KEKB B-Factory, as well as PEP-II, brought the final blow on the 2008 Nobel Prize in Physics for the Kobayashi-Maskawa theory. A few key issues will be described on the design and performance of KEKB to make the world's highest luminosity possible. (author)

A tau -- charm -- factory at Argonne

International Nuclear Information System (INIS)

Berger, E.; Fields, T.; Grosnick, D.; Norem, J.; Repond, J.; Schoessow, P.

1994-01-01

Depending on the beam energy setting, the τ -- charm -- factory will be optimized to study physics with τ leptons, with charmed mesons, or with charmonium states. This report gives a short overview of the physics of these topics. Also discussed are the detectors and the costs associated with this project

The Mathematics of Symmetrical Factorial Designs

Indian Academy of Sciences (India)

The Mathematics of Symmetrical Factorial Designs. Mausumi Bose (nee Sen) obtained her MSc degree in. Statistics from the Calcutta. University and PhD degree from the Indian Statistical. Institute. She is on the faculty of the Indian. Statistical Institute. Her main field of research interest is design and analysis of experiments.

The impact on the soil microbial community and enzyme activity of two earthworm species during the bioremediation of pentachlorophenol-contaminated soils.

Science.gov (United States)

Lin, Zhong; Zhen, Zhen; Wu, Zhihao; Yang, Jiewen; Zhong, Laiyuan; Hu, Hanqiao; Luo, Chunling; Bai, Jing; Li, Yongtao; Zhang, Dayi

2016-01-15

The ecological effect of earthworms on the fate of soil pentachlorophenol (PCP) differs with species. This study addressed the roles and mechanisms by which two earthworm species (epigeic Eisenia fetida and endogeic Amynthas robustus E. Perrier) affect the soil microbial community and enzyme activity during the bioremediation of PCP-contaminated soils. A. robustus removed more soil PCP than did E. foetida. A. robustus improved nitrogen utilisation efficiency and soil oxidation more than did E. foetida, whereas the latter promoted the organic matter cycle in the soil. Both earthworm species significantly increased the amount of cultivable bacteria and actinomyces in soils, enhancing the utilisation rate of the carbon source (i.e. carbohydrates, carboxyl acids, and amino acids) and improving the richness and evenness of the soil microbial community. Additionally, earthworm treatment optimized the soil microbial community and increased the amount of the PCP-4-monooxygenase gene. Phylogenic classification revealed stimulation of indigenous PCP bacterial degraders, as assigned to the families Flavobacteriaceae, Pseudomonadaceae and Sphingobacteriacea, by both earthworms. A. robustus and E. foetida specifically promoted Comamonadaceae and Moraxellaceae PCP degraders, respectively. Copyright © 2015 Elsevier B.V. All rights reserved.

PARTICLE FACTORIES: Tau-charm in the spotlight

International Nuclear Information System (INIS)

Anon.

1991-01-01

Following earlier workshops in Stanford (1989) and in Orsay (1990), some hundred physicists from Europe and the United States met from 29 April to 2 May in Seville, Spain, to consolidate plans for a Tau-Charm Factory

PARTICLE FACTORIES: Tau-charm in the spotlight

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-07-15

Following earlier workshops in Stanford (1989) and in Orsay (1990), some hundred physicists from Europe and the United States met from 29 April to 2 May in Seville, Spain, to consolidate plans for a Tau-Charm Factory.

Comments on particle identification at the B factory

International Nuclear Information System (INIS)

Ratcliff, B.N.

1992-01-01

The importance of particle identification at an asymmetric B Factory is discussed, and the general status of a number of particle identification technologies which might be included in B Factory detectors is briefly reviewed. It is generally agreed that high quality hadronic particle identification is fundamental to the central mission of understanding CP violation at the B Factory, but there is as yet no clear open-quotes consensusclose quotes solution for such a detector. In a sense, this lack of a particle identification solution is a matter of definition. There is, in fact, a perfectly reasonable, open-quotes conventional technologyclose quotes, particle identification system which makes use of a large tracking chamber with excellent (i.e., relativistic rise quality) dE/dx surrounded by a good TOF with a rather long flight path. The chamber must be rather large (around 2 meters in outer radius) and perhaps high pressure as well, but similar devices are rather well understood and it would appear to be possible to meet the particle identification performance required at B Factory momenta. This solution has not been embraced by any of the detector groups, however, because of the effect it has on the electromagnetic calorimetry. open-quotes Everyoneclose quotes wants high quality calorimetry (such as can be provided by CsI crystals), but such devices cost a great deal per unit volume, and the cost scales roughly like the inner radius squared. Moreover, no one wants to see the high quality (expensive) calorimetry compromised by excessive mass in front. Thus, the essence of the particle identification problem is that there is no approximately massless, very thin particle identification device known with adequate performance. Of course, it might equally well be said that there is no high quality calorimeter known which is sufficiently cost-effective to be placed outside an appropriately sized tracking plus particle identification system

Ultrastructural Characterization of Zika Virus Replication Factories

Directory of Open Access Journals (Sweden)

Mirko Cortese

2017-02-01

Full Text Available Summary: A global concern has emerged with the pandemic spread of Zika virus (ZIKV infections that can cause severe neurological symptoms in adults and newborns. ZIKV is a positive-strand RNA virus replicating in virus-induced membranous replication factories (RFs. Here we used various imaging techniques to investigate the ultrastructural details of ZIKV RFs and their relationship with host cell organelles. Analyses of human hepatic cells and neural progenitor cells infected with ZIKV revealed endoplasmic reticulum (ER membrane invaginations containing pore-like openings toward the cytosol, reminiscent to RFs in Dengue virus-infected cells. Both the MR766 African strain and the H/PF/2013 Asian strain, the latter linked to neurological diseases, induce RFs of similar architecture. Importantly, ZIKV infection causes a drastic reorganization of microtubules and intermediate filaments forming cage-like structures surrounding the viral RF. Consistently, ZIKV replication is suppressed by cytoskeleton-targeting drugs. Thus, ZIKV RFs are tightly linked to rearrangements of the host cell cytoskeleton. : Cortese et al. show that ZIKV infection in both human hepatoma and neuronal progenitor cells induces drastic structural modification of the cellular architecture. Microtubules and intermediate filaments surround the viral replication factory composed of vesicles corresponding to ER membrane invagination toward the ER lumen. Importantly, alteration of microtubule flexibility impairs ZIKV replication. Keywords: Zika virus, flavivirus, human neural progenitor cells, replication factories, replication organelles, microtubules, intermediate filaments, electron microscopy, electron tomography, live-cell imaging

Integral logistics of the nuclear fuel Factory Juzbado

International Nuclear Information System (INIS)

Perez, P.

2015-01-01

The Logistic considers the complete process since the determination of possible demand, production planning, materials procurement, production control and delivery of final products to customer. This complete process is managed in all the scope under the same department called Planning and Logistic. This integration, some times really complex, has allowed to Enusa factory control all the key aspects that allow its running completely, considering the synergy's and important advantages to solve different problems. This article describes how we work of the main areas of procurement, production planning and control, fuel delivery and project planning of improvements on equipment's and factory systems, with an integrated management of all of them under the same direction. (Author)

Exposing Dark Sector with Future Z-Factories arXiv

CERN Document Server

Liu, Jia; Wang, Xiao-Ping; Xue, Wei

We investigate the prospects of searching dark sector models via exotic Z-boson decay at future $e^+ e^-$ colliders with Giga Z and Tera Z options. Four general categories of dark sector models: Higgs portal dark matter, vector portal dark matter, inelastic dark matter and axion-like particles, are considered. Focusing on channels motivated by the dark sector models, we carry out a model independent study of the sensitivities of Z-factories in probing exotic decays. The limits on branching ratios of the exotic Z decay are typically $\\mathcal{O} (10^{-6} - 10^{-8.5}) $ for the Giga Z and $\\mathcal{O} (10^{-7.5} - 10^{-11})$ for the Tera Z, and they are compared with the projection for the high luminosity LHC. We demonstrate that future Z-factories can provide its unique and leading sensitivity, and highlight the complementarity with other experiments, including the indirect and direct dark matter search limits, and the existing collider limits. Future Z factories will play a leading role to uncover the hidden ...

Programme of identification and assessment of risks at Ukrainian milk processing factories

Directory of Open Access Journals (Sweden)

Shvets Victor H.

2014-01-01

Full Text Available The goal of the article lies in the study of possible risks at a milk processing factory and their identification and assessment by relevant criteria and creation of the efficient risk management system with the help of methods of reacting to them. The article considers the economic risk of production processes at a milk processing factory and control of their limit, studies identification and assessment of possible risks in accordance with the international practice pursuant to the COSO concept, and analyses methods of identification of assessment of the risk level and relevant methods of reacting to them. The authors offer the milk processing factory risk identification and assessment programme, which would ensure timely detection of the most important risks, which require relevant reactions, and development of new methods of internal control and recommendations on improvement of the risk assessment system for ensuring efficient activity of a factory in general.

Hardwood log grades and lumber grade yields for factory lumber logs

Science.gov (United States)

Leland F. Hanks; Glenn L. Gammon; Robert L. Brisbin; Everette D. Rast

1980-01-01

The USDA Forest Service Standard Grades for Hardwood Factory Lumber Logs are described, and lumber grade yields for 16 species and 2 species groups are presented by log grade and log diameter. The grades enable foresters, log buyers, and log sellers to select and grade those log suitable for conversion into standard factory grade lumber. By using the apropriate lumber...

Development of Rotational Smart Lighting Control System for Plant Factory

OpenAIRE

Won-Sub Lee; Sung-Gaun Kim

2012-01-01

Rotational Smart Lighting Control System can supply the quantity of lighting which is required to run plants by rotating few LED and Fluorescent instead of that are used in the existing plant factories.The initial installation of the existing plants factory is expensive, so in order to solve the problem with smart lighting control system was developed. The beam required intensity for the growth of crops, Photosynthetic Photon Flux Density(PPFD)is calculated; and the numbe...

Testing strong factorial invariance using three-level structural equation modeling

Directory of Open Access Journals (Sweden)

Suzanne eJak

2014-07-01

Full Text Available Within structural equation modeling, the most prevalent model to investigate measurement bias is the multigroup model. Equal factor loadings and intercepts across groups in a multigroup model represent strong factorial invariance (absence of measurement bias across groups. Although this approach is possible in principle, it is hardly practical when the number of groups is large or when the group size is relatively small. Jak, Oort and Dolan (2013 showed how strong factorial invariance across large numbers of groups can be tested in a multilevel structural equation modeling framework, by treating group as a random instead of a fixed variable. In the present study, this model is extended for use with three-level data. The proposed method is illustrated with an investigation of strong factorial invariance across 156 school classes and 50 schools in a Dutch dyscalculia test, using three-level structural equation modeling.

Argonne Tau-charm Factory collider design study

International Nuclear Information System (INIS)

Teng, L.C.; Crosbie, E.A.; Norem, J.; Repond, J.

1996-01-01

The design approach and design principles for a Tau-charm Factory at Argonne were studied. These studies led to a set of preliminary parameters and tentative component features as presented in this paper. copyright 1996 American Institute of Physics

KEK: B factory plans

International Nuclear Information System (INIS)

Anon.

1991-01-01

To boost the study of B mesons (carrying the heavy b quark), the Japanese KEK Laboratory is looking to construct a B-meson 'factory'. B-mesons have revealed unexpected and important quark physics. Well-known examples are the long lifetime of the B-mesons, indicating a large gap between the third and second quark generation (compared to that between the second and the first), and relatively large mixing of the neutral B-meson and its antiparticle, now interpreted as being due to a heavy sixth ('top') quark

76 FR 77175 - New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY

Science.gov (United States)

2011-12-12

...-AA00 New York Fun Factory Fireworks Display, Western Long Island Sound; Mamaroneck, NY AGENCY: Coast... in support of the New York Fun Factory Fireworks display. This action is necessary to provide for the... the Coast Guard to define regulatory safety zones. On May 10, 2012 New York Fun Factory Events is...

Engineering cell factories for producing building block chemicals for bio-polymer synthesis

OpenAIRE

Tsuge, Yota; Kawaguchi, Hideo; Sasaki, Kengo; Kondo, Akihiko

2016-01-01

Synthetic polymers are widely used in daily life. Due to increasing environmental concerns related to global warming and the depletion of oil reserves, the development of microbial-based fermentation processes for the production of polymer building block chemicals from renewable resources is desirable to replace current petroleum-based methods. To this end, strains that efficiently produce the target chemicals at high yields and productivity are needed. Recent advances in metabolic engineerin...

The benefits and challenges of sharing glidein factory operations across nine time zones between OSG and CMS

Science.gov (United States)

Sfiligoi, I.; Dost, J. M.; Zvada, M.; Butenas, I.; Holzman, B.; Wuerthwein, F.; Kreuzer, P.; Teige, S. W.; Quick, R.; Hernández, J. M.; Flix, J.

2012-12-01

OSG has been operating for a few years at UCSD a glideinWMS factory for several scientific communities, including CMS analysis, HCC and GLOW. This setup worked fine, but it had become a single point of failure. OSG thus recently added another instance at Indiana University, serving the same user communities. Similarly, CMS has been operating a glidein factory dedicated to reprocessing activities at Fermilab, with similar results. Recently, CMS decided to host another glidein factory at CERN, to increase the availability of the system, both for analysis, MC and reprocessing jobs. Given the large overlap between this new factory and the three factories in the US, and given that CMS represents a significant fraction of glideins going through the OSG factories, CMS and OSG formed a common operations team that operates all of the above factories. The reasoning behind this arrangement is that most operational issues stem from Grid-related problems, and are very similar for all the factory instances. Solving a problem in one instance thus very often solves the problem for all of them. This paper presents the operational experience of how we address both the social and technical issues of running multiple instances of a glideinWMS factory with operations staff spanning multiple time zones on two continents.

A 1 MHz beam chopper for the KAON Factory

International Nuclear Information System (INIS)

Wait, G.D.; Barnes, M.J.; Waters, G.; Figley, C.B.

1990-06-01

The proposed KAON Factory at TRIUMF requires a high repetition rate beam chopper for the injection process into the accumulator ring. Prototype studies on a novel design for an energy efficient 1 MHz (10 6 discrete pulses/s) beam chopper are described. In the low voltage prototype 20 V electrical pulses are stored in a low loss transmission line which is open circuited at the far end. Testing has just begun on high voltage prototype in which 7 kV pulses have been produced at the end of 10 cm diameter, 50 Ω coaxial cable. In the final version the voltage may be as high as 20 kV and the low loss transmission line will be coupled to an open circuited set of deflection plates through which the beam passes. Results on the performance of the low voltage prototype are presented as well as a description of the first test results from the high voltage prototype. (Author) 16 refs., 5 figs., tab

The antimatter factory is ready for another successful year

CERN Multimedia

CERN Bulletin

2011-01-01

CERN’s contribution to antimatter research is interspersed with important breakthroughs: from the creation of the very first anti-atoms in 1995 to the production of large quantities in 2002 and the invention in 2010 of the technique that freezes them down to allow precise studies of their properties. This week, antimatter experiments are on the starting blocks for a new run that promises to be just as exciting.   The Antiproton Decelerator (AD). CERN’s Antimatter Decelerator (AD) is a unique antimatter factory that produces low-energy anti-protons for creating anti-atoms. The AD delivers its precious ingredients to several experiments that use them to study antimatter properties from many different angles. The 2011 run is about to start, and the experiments are ready to enter a new data-taking period. Their scientific goals for this year include applying spectroscopy techniques for the first time to probe the inner workings of antihydrogen atoms; evaluating the biological effe...

Undergraduate Students' Initial Conceptions of Factorials

Science.gov (United States)

Lockwood, Elise; Erickson, Sarah

2017-01-01

Counting problems offer rich opportunities for students to engage in mathematical thinking, but they can be difficult for students to solve. In this paper, we present a study that examines student thinking about one concept within counting, factorials, which are a key aspect of many combinatorial ideas. In an effort to better understand students'…

Photon Factory activity report, 1988

International Nuclear Information System (INIS)

1989-01-01

Since the foundation of Photon Factory a decade age, it has played an important role as a unique synchrotron X-ray radiation source in Japan. Installation of various insertion devices, storage of intense positron beam and reduction of beam emittance were the substantial achievements in the last several years. The exploitation of the TRISTAN Accumulation Ring as a synchrotron radiation source has paved the way for a new potential of development. All these activities have brought about the increase of beamlines and the expansion of scientific fronts. Third International Conference on Synchrotron Radiation Instrumentation held in Tsukuba was one of the most highlighted events for the facility. In coming years, it is intended to open new research fields using the promising single bunch beam and circularly polarized wiggler radiation. The TRISTAN Main Ring also will be applied to synchrotron radiation research. The Photon Factory in a national synchrotron radiation research facility affiliated to the National Laboratory for High Energy Physics, and it consists of a 2.5 GeV electron linac, a 2.5 GeV storage ring as a synchrotron light source, beam lines and experimental stations. The operation, improvement and development in respective departments are reported. (Kako, I.)

A Method for Monitoring Iron and Steel Factory Economic Activity Based on Satellites

Directory of Open Access Journals (Sweden)

Yi Zhou

2018-06-01

Full Text Available The Chinese government has promulgated a de-capacity policy for economic growth and environmental sustainability, especially for the iron and steel industry. With these policies, this study aimed to monitor the economic activities and evaluate the production conditions of an iron and steel factory based on satellites via Landsat-8 Thermal Infrared Sensor (TIRS data and high-resolution images from January 2013 to October 2017, and propel next economic adjustment and environmental protection. Our methods included the construction of a heat island intensity index for an iron and steel factory (ISHII, a heat island radio index for an iron and steel factory (ISHRI and a dense classifying approach to monitor the spatiotemporal changes of the internal heat field of an iron and steel factory. Additionally, we used GF-2 and Google Earth images to identify the main production area, detect facility changes to a factory that alters its heat field and verify the accuracy of thermal analysis in a specific time span. Finally, these methods were used together to evaluate economic activity. Based on five iron and steel factories in the Beijing-Tianjin-Hebei region, when the ISHII curve is higher than the seasonal changes in a time series, production is normal; otherwise, there is a shut-down or cut-back. In the spatial pattern analyses, the ISHRI is large in normal production and decreases when cut-back or shut-down occurs. The density classifying images and high-resolution images give powerful evidence to the above-mentioned results. Finally, three types of economic activities of normal production, shut-down or cut-back were monitored for these samples. The study provides a new perspective and method for monitoring the economic activity of an iron and steel factory and provides supports for sustainable development in China.

RIKEN RI Beam Factory and recent research activities

International Nuclear Information System (INIS)

Ueno, H.

2014-01-01

RIKEN has started the operation of the new facility for the Radioactive-Isotope Beam Factory (RIBF) project since 2006. In this project, intense primary beams are delivered at the energy E/A = 345 MeV over the whole range of the atomic number under the cyclotron-cascade acceleration scheme. The current, stability and sustainability in beam delivery have been increased significantly by recent improvement of the accelerator system. A high-current primary beam is then used to produce radioactive-isotope beams at the world's highest current utilizing the superconducting in-flight RI separator BigRIPS. Following the BigRIPS separator, several large-scale experimental key devices have been / will be installed, in order to fully capitalize the RIBF project. Owing to these progresses, nuclear structure information on far-unstable nuclei, which cannot be obtained by conventional technology, are now capable of being measured. Furthermore, in addition to such BigRIPS-related devices, other original experimental devices have been also newly installed at the lower energy experimental sites. Unique research opportunities are now available at the RIBF facility. (author)

Participation of CUKROPROJEKT in the export of sugar factories in the years 1952-1972. I. [China

Energy Technology Data Exchange (ETDEWEB)

1973-01-01

CUKROPROJEKT supervised the building of 2 beet sugar factories in the Chinese People's Republic. Work started in 1954 with preparation of the lay-out and the actual erection of the plant started in 1954. The plants in question were the sugar factories Chiamussy on the river Sungari and Sinjungo (New China) in Kirin, both with a daily capacity of 1000 t. Initial difficulties were overcome, the factories were put into operation in 1955 and the planned output was achieved. CUKROPROJEKT experts acquainted themselves with cane sugar processing and planned a design for a 3000 tons/day sugar factory with departments for production of absolute alcohol, fodder yeast, and solid CO/sub 2/. The factory was built in the Pearl River delta. Building operations started in 1957 and the factory started working in 1959. The planned output was achieved during the 1st campaign, with a peak throughput of 3600 tons/day.

Apiary B Factory lattice design

International Nuclear Information System (INIS)

Donald, M.H.R.; Garren, A.A.

1991-04-01

The Apiary B Factory is a proposed high-intensity electron-positron collider. This paper will present the lattice design for this facility, which envisions two rings with unequal energies in the PEP tunnel. The design has many interesting optical and geometrical features due to the needs to conform to the existing tunnel, and to achieve the necessary emittances, damping times and vacuum. Existing hardware is used to a maximum extent. 8 figs. 1 tab

Proceedings of the tau-charm factory workshop

International Nuclear Information System (INIS)

Beers, L.V.

1989-06-01

This report contains papers on the following main topics: machine physics; tau physics; D and D s physics; J/Ψ and charmonium physics; tau charm factories; workshop summary; accelerator physics; tau physics; charmed meson physics; J/Ψ and charmonium physics; and detector

Is the color-octet mechanism consistent with the double J/ψ production measurement at B-factories?

Energy Technology Data Exchange (ETDEWEB)

Feng, Yu [Third Military Medical University, Department of Physics, School of Biomedical Engineering, Chongqing (China); Sun, Zhan [Guizhou Minzu University, School of Science, Guiyang (China); Zhang, Hong-Fei [Third Military Medical University, Department of Physics, School of Biomedical Engineering, Chongqing (China); Chongqing University of Posts and Telecommunications, School of Science, Chongqing (China)

2017-04-15

Double J/ψ production in e{sup +}e{sup -} collisions involving color-octet channels are evaluated up to order α{sup 2}α{sub s}{sup 3}. Having implemented the variation of the parameters (m{sub c}, μ{sub r} and long-distance matrix elements), we found that the cross sections for producing double J/ψ at B-factories range from -0.016 to 0.245 fb, which are even much smaller than that via the color-singlet mechanism. Accordingly, this result is consistent with the measurement by the Belle and BABAR Collaborations. (orig.)

Design and manufacture NCS instruments for cement factories

International Nuclear Information System (INIS)

Nguyen Thanh Tuy; Nguyen Tien Dung; Dang Nguyet Anh; Nguyen Phuc; Khuong Thanh Tuan; Luong Duc Long; Pham Trong Quyen

2003-01-01

The ministry project 'Design and manufacture some of NCS instruments for cement factories' is a part of instrumentation for cement production in Vietnam. The objectives of the project include: 1/Design and manufacture the automatic control system for cement raw material mixing, connected to components X-ray analyzer through serial port of PC; 2/Design and manufacture the automatic discharge control system using gamma rays. The instruments, made by the project , for controlling the conveyor belt weighing machine can be easily improved for various types of conveyor belt weighing machines. Their mobility and software equipped can be adapted for requirement of modern cement production technology. The instruments are operating well in some cement factories and they are helping in quality control. (NHA)

Production of fatty acid-derived oleochemicals and biofuels by synthetic yeast cell factories

DEFF Research Database (Denmark)

Zhou, Yongjin J.; Buijs, Nicolaas A; Zhu, Zhiwei

2016-01-01

Sustainable production of oleochemicals requires establishment of cell factory platform strains. The yeast Saccharomyces cerevisiae is an attractive cell factory as new strains can be rapidly implemented into existing infrastructures such as bioethanol production plants. Here we show high-level p...

The link between the use of advanced planning and scheduling (APS) modules and factory context

DEFF Research Database (Denmark)

Kristensen, Jesper; Asmussen, Jesper Normann; Wæhrens, Brian Vejrum

2017-01-01

at factories characterized by low planning maturity, but lower for factories with medium planning maturity. For low planning maturity, the APS module is used for improving the configuration of the manufacturing system, whereas high planning maturity is required to capture performance benefits from optimization......Through a study of four embedded action research cases within a global OEM, it is investigated how the frequency of use and contribution of an Advanced Planning and Scheduling (APS) module are affected by factory context. The performance contribution of the APS module is found to be high...... and scenario planning. Further, it is found that planning complexity at the factory increases both the frequency of use and the contribution of using APS modules. On the basis of the findings, three propositions are formulated on the link between factory context and the use of APS module....

Aspergillus oryzae-based cell factory for direct kojic acid production from cellulose.

Science.gov (United States)

Yamada, Ryosuke; Yoshie, Toshihide; Wakai, Satoshi; Asai-Nakashima, Nanami; Okazaki, Fumiyoshi; Ogino, Chiaki; Hisada, Hiromoto; Tsutsumi, Hiroko; Hata, Yoji; Kondo, Akihiko

2014-05-18

Kojic acid (5-Hydroxy-2-(hydroxymethyl)-4-pyrone) is one of the major secondary metabolites in Aspergillus oryzae. It is widely used in food, pharmaceuticals, and cosmetics. The production cost, however, is too high for its use in many applications. Thus, an efficient and cost-effective kojic acid production process would be valuable. However, little is known about the complete set of genes for kojic acid production. Currently, kojic acid is produced from glucose. The efficient production of kojic acid using cellulose as an inexpensive substrate would help establish cost-effective kojic acid production. A kojic acid transcription factor gene over-expressing the A. oryzae strain was constructed. Three genes related to kojic acid production in this strain were transcribed in higher amounts than those found in the wild-type strain. This strain produced 26.4 g/L kojic acid from 80 g/L glucose. Furthermore, this strain was transformed with plasmid harboring 3 cellulase genes. The resultant A. oryzae strain successfully produced 0.18 g/L of kojic acid in 6 days of fermentation from the phosphoric acid swollen cellulose. Kojic acid was produced directly from cellulose material using genetically engineered A. oryzae. Because A. oryzae has efficient protein secretion ability and secondary metabolite productivity, an A. oryzae-based cell factory could be a platform for the production of various kinds of bio-based chemicals.

Energy–exergy analysis and optimisation of a model sugar factory in Turkey

International Nuclear Information System (INIS)

Taner, Tolga; Sivrioglu, Mecit

2015-01-01

This study is related to the energy and exergy analysis of a model sugar factory in Turkey. In this study, energy efficiency issue in food industries are investigated within a general context to provide energy saving by reducing energy – exergy losses in the sugar production process. The aim of this study is to determine the best energy and exergy efficiency with the mass and energy balances according to design parameters for a sugar factory. Energy savings that can be applied in food industries are examined. Appropriate scenarios are prepared, and optimization results are compared. As a result of thermodynamics calculations made according to the 1st and 2nd Laws of Thermodynamics, energy and exergy efficiencies of a factory were calculated. Factory total energy efficiency and exergy efficiency were found to be 72.2% and 37.4%, respectively, and according to these results, energy quality was found to be 0.64. In conclusion, the current turbine power process energy and exergy efficiencies were 46.4% and 27.7%, respectively, and the optimized turbine power process energy and exergy efficiencies were 48.7% and 31.7%, respectively. This study performs an attitude to the problem of exergy optimization of the turbine power plant. An overall assessment of the energy and exergy efficiency calculations is performed and is focused on how they should be. - Highlights: • The energy and exergy efficiency of a sugar plant depends more on steam than process. • Energy and exergy efficiencies of a factory increase when the turbine power increases, as in a sugar factory. • Statistical analysis demonstrates the precision of data. • Thermoeconomic analysis of the energy and exergy efficiency of the Çumra Sugar Integrated Plant is performed.

Effect of groundwater geochemistry on pentachlorophenol remediation by smectite-templated nanosized Pd0/Fe0.

Science.gov (United States)

Jia, Hanzhong; Gu, Cheng; Li, Hui; Fan, Xiaoyun; Li, Shouzhu; Wang, Chuanyi

2012-09-01

Zero-valent iron holds great promise in treating groundwater, and its reactivity and efficacy depend on many surrounding factors. In the present work, the effects of solution chemistry such as pH, humic acid (HA), and inorganic ions on pentachlorophenol (PCP) dechlorination by smectite-templated Pd(0)/Fe(0) were systematically studied. Smectite-templated Pd(0)/Fe(0) was prepared by saturating the negatively charged sites of smectite clay with Fe(III) and a small amount of Pd(II), followed by borohydride reduction to convert Fe(III) and Pd(II) into zero-valent metal clusters. Batch experiments were conducted to investigate the effects of water chemistry on PCP remediation. The PCP dechlorination rate critically depends on the reaction pH over the range 6.0~10.0; the rate constant (k (obs)) increases with decreasing the reaction pH value. Also, the PCP remediation is inhibited by HA, which can be attributed to the electron competition of HA with H(+). In addition, the reduction of PCP can be accelerated by various anions, following the order: Cl(-) > HCO (3) (-) > SO (4) (2-) ~no anion. In the case of cations, Ca(2+) and Mg(2+) (10 mM) decrease the dechlorination rate to 0.7959 and 0.7798 from 1.315 h(-1), respectively. After introducing HA into the reaction systems with cations or/and anions, the dechlorination rates are similar to that containing HA alone. This study reveals that low pH and the presence of some anions such as Cl(-) facilitate the PCP dechlorination and induce the rapid consumption of nanosized zero-valent iron simultaneously. However, the dechlorination rate is no longer correlated to the inhibitory or accelerating effects by cations and anions in the presence of 10 mg/L HA.

Neutrino Factory and Muon Collider Collaboration R and D Program

International Nuclear Information System (INIS)

Zisman, M.S.

2000-01-01

The Neutrino Factory and Muon Collider Collaboration (MC) comprises some 140 scientists and engineers located at U.S. National Laboratories and Universities, and at a number of non-U.S. research institutions. In the past year, the MC R and D program has shifted its focus mainly toward the design issues related to the development of a Neutrino Factory based on a muon storage ring. In this paper the status of the various R and D activities is described, and future plans are outlined

The role of factorial cumulants in reactor neutron noise theory

International Nuclear Information System (INIS)

Colombino, A.; Pacilio, N.; Sena, G.

1979-01-01

The physical meaning and the combinatorial implications of the factorial cumulant of a state variable such as the number of neutrons or the number of neutron counts are specified. Features of the presentation are: (1) the fission process is treated in its entirety without the customary binary emission restriction, (b) the introduction of the factorial cumulants helps in reducing the complexity of the mathematical problems, (c) all the solutions can be obtained analytically. Only the ergodic hypothesis for the neutron population evolution is dealt with. (author)

How Important is Geographical Agglomeration to Factory Efficiency in Japan’s Manufacturing Sector?

DEFF Research Database (Denmark)

Fukao, Kyoji; Kravtsova, Victoria; Nakajima, Kentaro

2014-01-01

for each industry, second, geographical distances to the most efficient factory in the prefecture and Japan overall are third, determinants of factories’ performance. Results suggest that clustering occurs in each industry and efficient factories concentrate in certain regions. The share of efficient firms...

Pioneering role of the KEKB B-factory

International Nuclear Information System (INIS)

Oide, Katsunobu

2009-01-01

The KEKB B-factory experimentally verified the Kobayashi-Masukawa theory, and contributed to their 2008 Nobel Prize in Physics. KEKB has realized various innovative technologies to achieve the highest luminosity in the world. KEKB has opened up a new frontier of high-luminosity colliders. (author)

Plant factories; crop transpiration and energy balance

NARCIS (Netherlands)

Graamans, Luuk; Dobbelsteen, van den Andy; Meinen, Esther; Stanghellini, Cecilia

2017-01-01

Population growth and rapid urbanisation may result in a shortage of food supplies for cities in the foreseeable future. Research on closed plant production systems, such as plant factories, has attempted to offer perspectives for robust (urban) agricultural systems. Insight into the explicit role

The Idea Factory: An Interactive Intergroup Exercise

Science.gov (United States)

Rosh, Lisa; Leach, Evan

2011-01-01

This article outlines the Idea Factory exercise, an interactive exercise designed to help participants examine group, individual, and organizational factors that affect intergroup conflict. Specific emphasis is placed on exploring the relationship between intra- and intergroup dynamics and identifying managerial practices that foster effective…

KORELASI PENGGUNAAN BAHASA INGGRIS DALAM PENAMAAN FACTORY OUTLET (FO DI BANDUNG TERHADAP KEPUTUSAN PEMBELIAN

Directory of Open Access Journals (Sweden)

Gartika Rahmasari

2016-03-01

    Abstrak - Bahasa Inggris merupakan bahasa yang memiliki prestise atau kedudukan yang tinggi, bahkan di Indonesia yang memiliki bahasa Indonesia sebagai bahasa nasional. Bahasa Inggris sebagai bahasa internasional mendapatkan apresiasi lebih tinggi dibandingkan dengan bahasa Indonesia, khususnya di bidang pariwisata. Bandung sebagai salah satu tujuan pariwisata, khususnya wisata kuliner dan tujuan belanja, tidak terkecuali mendapat pengaruh yang besar dalam hal penggunaan bahasa Inggris. Hal ini dapat dilihat dari penggunaan sejumlah nama Factory Outlet yang ada di Bandung, yang hampir sebagian besar menggunakan bahasa Ingris atau serapan bahasa Inggris sebagai “brand” atau nama yang digunakan oleh Factory Outlet yang tersebar di seluruh Bandung. Jurnal ini merupakan study literatur yang meneliti tentang hubungan penggunaan bahasa Asing dalam nama Factory Outlet  (FO terhadap keputusan pembelian. Yang menjadi responden yang diteliti dalam penelitian ini adalah mahasiswa Ilmu Komunikasi, Universitas Telkom sebanyak 55 responden, dengan rentang usia 17-20 tahun. Dari hasil penelitian, diketahui bahwa secara umum, penggunaan bahasa Inggris dalam penamaan Factory Outlet (FO mempengaruhi keputusan responden untuk berbelanja ke FO tersebut.   Kata Kunci: Keputusan Pembelian, Factory Outlet, FO, Bahasa Inggris.

Jean Piaget: Images of a life and his factory.

Science.gov (United States)

Burman, Jeremy Trevelyan

2012-08-01

In this article, I use a new book about Jean Piaget to introduce a new historical method: examining "psychological factories." I also discuss some of the ways that "Great Men" are presented in the literature, as well as opportunities for new projects if one approaches the history of the discipline differently and examines the conditions that made that greatness possible. To that end, the article includes many details about Piaget that have never before been discussed in English. Attention is drawn, in particular, to Piaget's collaborators: the hundreds of workers at his factory in Geneva, many of whom were women. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

TRIUMF: Kaon factory physics

International Nuclear Information System (INIS)

Anon.

1982-01-01

The second TRIUMF Kaon Factory Physics Workshop was held on 10-14 August, 1981. About a hundred physicists participated in the meeting, which consisted of fifteen invited talks and four afternoon workshop sessions, and proved to be a stimulating and productive event. The discussions centred on identifying the most important physics that could be studied with a machine providing an increase in intensity of two orders of magnitude in primary proton beam over present accelerators in the energy range 8 to 20 GeV, and on establishing some preliminary guidelines on the desirable properties of secondary beams at such a machine

Factorial-moment and fractal analyses of γ families from atmospheric cascades

International Nuclear Information System (INIS)

Kalmakhelidze, M. E.; Roinishvili, N. N.; Svanidze, M. S.; Khizanishvili, L. A.; Chadranyan, L. Kh.

1997-01-01

Methods of factorial moments and fractal dimensions are used to analyze γ families from nuclear-electromagnetic cascades in the atmosphere. The analysis aims at estimating the sensitivity of these methods to multiparticle density fluctuations in γ families as considered in spaces of various variables. The mean characteristics of factorial and fractal moments in the azimuthal plane are studied and compared with those of the statistical ensemble of random families. It is shown that fluctuations of the photon distribution in the azimuthal angle Φ are of a dynamic origin. The mean model parameters are analyzed as functions of the radius vector R, an analog of pseudorapidity, and the product ER (E is the energy of an individual photon), an analog of the transverse momentum. Particle densities for two-dimensional partitions into both rings (in the radius R) and sectors (in the azimuthal angle Φ), d 2 N/dΦdR, are also considered. The distributions of various factorial and fractal features of individual γ families are compared with those for the statistical ensemble of random families. Correlations of these features for a γ family treated in terms of different variables (sectors and rings) are studied. Correlations between different factorial-fractal parameters of γ families are analyzed

A kaon factory for TRIUMF

International Nuclear Information System (INIS)

Measday, D.F.

1988-11-01

The design study for the TRIUMF Kaon Factory has recently been funded. A short discussion of the scientific motivation is given first, followed by a brief description of the 30 GeV synchrotron which is being proposed. There will be five rings altogether using the present TRIUMF 500 MeV cyclotron as an injector. If the project is funded in 1990 the accelerators would be completed in 1995 or so, and the experimental programme would start a year later

Degradation of Pentachlorophenol in Aqueous Solution by the UV/ZrO 2 /H 2 O 2 Photocatalytic Process

Directory of Open Access Journals (Sweden)

Mohammad Reza Samarghandi

2015-12-01

Full Text Available Pentachlorophenol (PCP, which is one of the resistant phenolic compounds, has been classified in the category of EPA’s priority pollutants due to its high toxicity and carcinogenic potential. Therefore, its removal from water and wastewater is very important. Various methods have been studied for removing the compound, among which advanced oxidation processes (AOPs have attracted much attention because of ease of application and high efficiency. Thus the aim of this study was to investigate the efficiency of the UV/ZrO2/H2O2 process, as an AOP, for PCP removal from aquatic environments. The effects of several parameters such as ultraviolet (UV exposure time, initial PCP concentration, pH, concentration of zirconium dioxide (ZrO2 nanoparticles, and H2O2 concentration were studied. Kinetics of the reaction was also detected. The concentration of the stated materials in the samples was determined using a spectrophotometer at 500 nm. The results showed that the highest efficiency (approximately 100% was reached at optimized conditions of pH 6, contact time of 30 minutes, initial PCP concentration of 20 mg/L, the nanoparticles concentration of 0.1 g/L and H2O2 concentration of 14.7 mM/L. Also, the process followed the first order kinetics reaction. The obtained results illustrated that the UV/ZrO2/H2O2 process has a high ability in removing PCP.

Personal exposure to wood dust among workers in NekaChoob factory in 2013

Directory of Open Access Journals (Sweden)

Mahmoud Mohammadyan

2014-12-01

Full Text Available Background and Purpose: Inhalation of hardwood dust may produce a range of adverse health effects in the upper and lower respiratory system, including asthma, along with Sino-nasal cancer and nasopharyngeal cancer. This study was carried out to evaluate personal exposure to wood dust among workers in chipboard and furniture production saloons in Neka Choob factory, Iran. Materials and Methods: Gravimetric method No. 0500 recommended by National Institute for Occupational Safety and Health was used to determine the wood dust concentrations in the workers’ breathing zone. The sampling air was drawn through a polyvinyl chloride filter within the breathing zone, using a calibrated personal sampling pump. Results: The mean workers’ personal exposure to wood dust in furniture production saloon (2.87 ± 1.95 mgm-3 was higher than mean exposure of workers whom were working in chipboard saloon (0.93 ± 0.35 mgm-3. The mean workers’ exposure to wood dust for both saloons was 1.70 ± 1.53 mgm-3. Conclusion: The mean workers’ personal exposure to wood dust in Neka Choob factory was higher than Occupational Exposure Limit (OEL recommended by national (Iranian Committee for Review and Collection of OEL and European ::union:: Scientific Committee on OEL committees. All workers in furniture production saloon and three workers in chipboard saloon have a mean exposure higher than OEL.

Dental caries experience in high risk soft drinks factory workers of South India: a comparative study.

Science.gov (United States)

Kumar, Sandeep; Acharya, Shashidhar; Vasthare, Ramprasad; Singh, Siddharth Kumar; Gupta, Anjali; Debnath, Nitai

2014-01-01

The consumption of soft-drinks has been associated with dental caries development. The aim was to evaluate dental caries experience amongst the workers working in soft-drink industries located in South India and compare it with other factory workers. To evaluate the validity of specific caries index (SCI), which is newer index for caries diagnosis. This was a cross-sectional study carried out among 420 workers (210 in soft-drinks factory and 210 in other factories), in the age group of 20-45 years of Udupi district, Karnataka, India. Index used for clinical examination was decayed, missing, filled surfaces (DMFS) index and SCI. The mean and standard deviation (SD) of decayed surface (5.8 ± 1.8), missing surface (4.3 ± 2) and filled surface (1.94 ± 1.95) and total DMFS score (12.11 ± 3.8) in soft-drinks factory workers were found to be significantly higher than the other factory workers. The total SCI score (mean and SD) was found to be significantly higher in soft-drinks factory workers (5.83 ± 1.80) compared with other factory workers (4.56 ± 1.45). There was a high correlation obtained between SCI score and DMFS score. The regression equation given by DMFS = 1.178 + 1.866 (SCI scores). The caries experience was higher in workers working in soft-drinks factory and this study also showed that specific caries index can be used as a valid index for assessing dental caries experience.

Bioaccumulation of hydroxylated polychlorinated biphenyls and pentachlorophenol in the serum of northern elephant seal pups (Mirounga angustirostris)

Energy Technology Data Exchange (ETDEWEB)

Louis, Caroline, E-mail: caroline.louis@uclouvain.be [Institut des Sciences de la Vie, UCLouvain, Croix du Sud 2/L7.05.08, 1348 Louvain-la-Neuve (Belgium); Covaci, Adrian [Department of Pharmaceutical Sciences, Toxicological Center, Campus Drie Eiken, Universiteit Antwerpen, Universiteitsplein 1, 2610 Wilrijk (Belgium); Stas, Marie [Institut des Sciences de la Vie, UCLouvain, Croix du Sud 2/L7.05.08, 1348 Louvain-la-Neuve (Belgium); Crocker, Daniel E. [Department of Biology, Sonoma State University, 1801 East Cotati Ave, Rohnert Park, CA 94928 (United States); Malarvannan, Govindan [Department of Pharmaceutical Sciences, Toxicological Center, Campus Drie Eiken, Universiteit Antwerpen, Universiteitsplein 1, 2610 Wilrijk (Belgium); Dirtu, Alin C. [Department of Pharmaceutical Sciences, Toxicological Center, Campus Drie Eiken, Universiteit Antwerpen, Universiteitsplein 1, 2610 Wilrijk (Belgium); Department of Chemistry, “Al. I. Cuza” University of Iasi, 700506 Iasi (Romania); Debier, Cathy [Institut des Sciences de la Vie, UCLouvain, Croix du Sud 2/L7.05.08, 1348 Louvain-la-Neuve (Belgium)

2015-01-15

Northern elephant seals (NES) (Mirounga angustirostris) from the Año Nuevo State Reserve (CA, USA) were sampled at 1-, 4-, 7- and 10-week post-weaning. Concentrations of hydroxylated polychlorinated biphenyls (HO-PCBs) and their parent PCBs were measured in the serum of each individual. The ΣHO-PCB concentrations in the serum increased significantly between early and late fast (from 282±20 to 529±31 pg/mL). This increase might result from a mobilisation of HO-PCBs transferred from the mother during gestation and/or lactation and stored in the pup's liver. Food deprivation has been shown to exacerbate biotransformation capacities in mammals, birds and fish. The HO-penta-CBs was the predominant homologue group, followed by HO-hexa-CBs and HO-hepta-CBs. No preferential pathway for the metabolism of HO-PCBs (HO-direct insertion or NIH-shift of a chlorine atom) could be evidenced. The concentrations of pentachlorophenol (PCP) in the serum of weaned NES increased from 103±7 pg/mL at early fast to 246±41 pg/mL at late fast, which is within the range of PCP concentrations usually encountered in marine mammals. - Highlights: • Σ HO-PCB concentrations in serum significantly increased between early and late fast. • The HO-penta-CBs were the predominant homologue group measured in serum. • No preferential pathway for the metabolism of HO-PCBs could be evidenced. • PCP concentrations in serum significantly increased between early and late fast.

Bioaccumulation of hydroxylated polychlorinated biphenyls and pentachlorophenol in the serum of northern elephant seal pups (Mirounga angustirostris)

International Nuclear Information System (INIS)

Louis, Caroline; Covaci, Adrian; Stas, Marie; Crocker, Daniel E.; Malarvannan, Govindan; Dirtu, Alin C.; Debier, Cathy

2015-01-01

Northern elephant seals (NES) (Mirounga angustirostris) from the Año Nuevo State Reserve (CA, USA) were sampled at 1-, 4-, 7- and 10-week post-weaning. Concentrations of hydroxylated polychlorinated biphenyls (HO-PCBs) and their parent PCBs were measured in the serum of each individual. The ΣHO-PCB concentrations in the serum increased significantly between early and late fast (from 282±20 to 529±31 pg/mL). This increase might result from a mobilisation of HO-PCBs transferred from the mother during gestation and/or lactation and stored in the pup's liver. Food deprivation has been shown to exacerbate biotransformation capacities in mammals, birds and fish. The HO-penta-CBs was the predominant homologue group, followed by HO-hexa-CBs and HO-hepta-CBs. No preferential pathway for the metabolism of HO-PCBs (HO-direct insertion or NIH-shift of a chlorine atom) could be evidenced. The concentrations of pentachlorophenol (PCP) in the serum of weaned NES increased from 103±7 pg/mL at early fast to 246±41 pg/mL at late fast, which is within the range of PCP concentrations usually encountered in marine mammals. - Highlights: • Σ HO-PCB concentrations in serum significantly increased between early and late fast. • The HO-penta-CBs were the predominant homologue group measured in serum. • No preferential pathway for the metabolism of HO-PCBs could be evidenced. • PCP concentrations in serum significantly increased between early and late fast

Design studies for the Positron Factory

International Nuclear Information System (INIS)

Okada, S.; Sunaga, H.; Kaneko, H.; Masuno, S.; Kawasuso, A.; Sakai, T.; Takizawa, H.; Yotsumoto, K.; Honda, Y.; Tagawa, S.

1996-01-01

In the design study for the Positron Factory, a feasibility of simultaneous extraction of multi-channel monoenergetic positron beams, which had been proposed at the previous conference (Linac 94), was demonstrated by an experiment using an electron linac. On the basis of the experimental result, an efficient moderator structure, which is composed of honeycomb-like assembled moderator foils and reflectors, is proposed. (author)

Optimization of Amylase and Protease Production from Aspergillus awamori in Single Bioreactor Through EVOP Factorial Design Technique

Directory of Open Access Journals (Sweden)

Sangeeta Negi

2006-01-01

Full Text Available Evolutionary operation (EVOP factorial design technique was explored in order to economically produce amylase and protease at their optimum level in a single bioreactor by modified solid-state fermentation. Maximum yields of amylase and protease were achieved, using wheat bran as a substrate by a highly potent, locally isolated strain of Aspergillus awamori: Nakazawa MTCC 6652. The strain had been induced previously, inferring the ability to produce both enzymes concomitantly in a single bioreactor with their maximum capacity. The highest secretion of amylase and protease were measured to be 9420.6 and 1930 U/g, respectively, at 37 °C. pH and relative humidity were found to be optimum at 4 and 85 %, evaluated through EVOP method.

Determinants of Occupational Injury in Kombolcha Textile Factory, North-East Ethiopia

OpenAIRE

S Yessuf Serkalem; G Moges Haimanot; N Ahmed Ansha

2014-01-01

Background: Textile factory is among the most common manufacturing industries that has higher rate of work-related injuries. Knowing the associated factors of work-related injuries can be a critical step for improving the working condition of workers in the sector. Objective: To assess the major determinants of occupational injury among workers in Kombolcha textile factory, North-East Ethiopia. Methods: An institution-based cross-sectional study was conducted from April 1 to 15, 2013...

Prevention of melanin formation during aryl alcohol oxidase production under growth-limited conditions using an Aspergillus nidulans cell factory.

Science.gov (United States)

Pardo-Planas, Oscar; Prade, Rolf A; Müller, Michael; Atiyeh, Hasan K; Wilkins, Mark R

2017-11-01

An Aspergillus nidulans cell factory was genetically engineered to produce an aryl alcohol oxidase (AAO). The cell factory initiated production of melanin when growth-limited conditions were established using stationary plates and shaken flasks. This phenomenon was more pronounced when the strain was cultured in a trickle bed reactor (TBR). This study investigated different approaches to reduce melanin formation in fungal mycelia and liquid medium in order to increase the enzyme production yield. Removal of copper from the medium recipe reduced melanin formation in agar cultures and increased enzyme activities by 48% in agitated liquid cultures. Copper has been reported as a key element for tyrosinase, an enzyme responsible for melanin production. Ascorbic acid (0.44g/L) stopped melanin accumulation, did not affect growth parameters and resulted in AAO activity that was more than two-fold greater than a control treatment with no ascorbic acid. Copyright © 2017 Elsevier Ltd. All rights reserved.

Enzyme and biochemical producing fungi

DEFF Research Database (Denmark)

Lübeck, Peter Stephensen; Lübeck, Mette; Nilsson, Lena

2010-01-01

factories for sustainable production of important molecules. For developing fungi into efficient cell factories, the project includes identification of important factors that control the flux through the pathways using metabolic flux analysis and metabolic engineering of biochemical pathways....

Measurement of CP violation at a Neutrino Factory

CERN Document Server

Gómez-Cadenas, J J

2001-01-01

The prospects of measuring CP violation in the leptonic sector using the intense neutrino beams arising from muon decay in the straight sections of a muon accumulator ring (the so-called neutrino factory) are discussed.

Employment and Training Problems in New Factories.

Science.gov (United States)

International Labour Office, Geneva (Switzerland).

Does management in newly established factories using highly advanced technology meet special problems in recruitment and training of their workers? Are the traditional training systems supplying the skilled manpower required for running highly sophisticated plants? These were the basic questions asked when the present study was started in seven…

Effects of lighting and air-conditioning systems on growth weight and functional composition of frill-lettuce produced in plant factory

Science.gov (United States)

Yoshida, Atsumasa; Okamura, Nobuya; Furukawa, Hajime; Myojin, Chiho; Moriuchi, Koji; Kinoshita, Shinichi

2017-06-01

The aim of the present study was to develop optimal air-conditioning systems for plant factories. To verify the effect of particular air-conditioning and lighting systems, cultivation experiments were performed with frill-lettuce for two weeks. In the present study, the relationship between the cultivation condition, the yield (i.e., increase in edible portion weight), and the functional components were discussed. Based on the measured data, increased photosynthetic photon flux density increased antioxidative activity and edible portion weight, possibly because high light intensities are stressful for frill lettuce. Antioxidative activity also increased under conditions of low CO2 concentration, weak and strong winds, and high air temperature because these conditions became stresses for the plants. However, a decrease in edible portion weight was observed under these conditions, implying there is a negative correlation between antioxidative activity and edible portion weight.

Training Workers for the Factory of the Future.

Science.gov (United States)

Clancy, J. Anthony

1989-01-01

In the factory of the future, emphasis on quality and increased productivity creates a competitive advantage. People and computers work together in all major activities. Training is a major factor in creating that competitive advantage. (JOW)

Quantum mechanics paradoxes at the Φ-factory

International Nuclear Information System (INIS)

Ghirardi, G.C.; Grassi, R.; Weber, T.

1991-04-01

We discuss the possibility of performing experiments allowing one to test quantum mechanics versus any local realistic model within the context of the physics at the Φ-factory. After having sketched the main features of the physical process under consideration and having focused the locality requirements for it, we derive Bell's inequality for the two-meson system. Comparison with quantum predictions shows that the inequality is not violated for any choice of the parameters characterizing the measurement process. Contrary to the case of spin variables, there is then no way to exclude, by experiments at the Φ-factory, the possibility of a local realistic description of the process. A recent suggestion about a test of quantum predictions versus the assumption of a spontaneous factorization mechanism, as well as the claimed validity of an inequality which is different from Bell's one, are also discussed. The general conclusion is that the Φ-factory facility does not seem to open new ways of testing quantum mechanics versus alternative general schemes of the type which are usually regarded as worth considering the debate about locality and quantum mechanics. The concluding Section is devoted to making clear our position with respect to the problems discussed in this paper. It is pointed out that, in our opinion, the existing experimental evidence makes already clear that one has to accept the ''mysterious'' features of microscopic systems. The really crucial problem is that of investigating whether one can restore a coherent worldview which generally conforms with our experience at the macroscopic level, by keeping all highly successful predictions of quantum theory at the microscopic one. (author). 22 refs

The impact of two-photon physics on a B factory detector

International Nuclear Information System (INIS)

Bauer, D.A.

1992-01-01

While preceding workshops have outlined the broad range of physics topics which could be addressed at a B Factory, the challenge in this workshop was to define the impacts of this physics on the detector and delineate areas which will need further study. In this report, the author briefly recap the two-photon physics prospects at a B Factory and then show studies done to assess how the detector at such a facility could accommodate such physics

Removal of 2,4-dichlorophenol and pentachlorophenol from waters by sorption using coal fly ash from a Portuguese thermal power plant

International Nuclear Information System (INIS)

Estevinho, Berta N.; Martins, Isabel; Ratola, Nuno; Alves, Arminda; Santos, Lucia

2007-01-01

Chlorophenols are one of the most important groups of priority pollutants, due to their high toxicity, mutagenicity and carcinogenicity. Although activated carbon has been the preferred choice for the removal of such pollutants from wastewaters, the search for cheaper alternative sorbents became common in the last years. Fly ash, a by-product from coal burning power plants, has a surface composition that may enable the sorption of specific organic compounds. Therefore, this feasibility study presents the optimization of the operating parameters of a fixed-bed column containing fly ash particles, percolated by aqueous solutions of 2,4-dichlorophenol (2,4-DCP) and pentachlorophenol (PCP) with concentrations of 1 and 100 μg/ml. Both chlorophenols were analysed by gas chromatography with electron capture detection (GC-ECD), after solid-phase microextraction (SPME), with limits of detection (LODs) of 7.28 μg/l for 2,4-DCP and 1.76 μg/l for PCP. Removal efficiencies above 99% were obtained for an initial concentration of 10 μg/ml of chlorophenols. Column saturation was achieved after 7 h of continuous operation for 2,4-DCP and 10 h for the PCP for feed levels of 10 μg/ml. Fly ash exhibited more affinity towards the sorption of PCP, in comparison to 2,4-DCP

A Preliminary Interaction Region Design for a Super B-Factory

CERN Document Server

Sullivan, Michael K; Donald, Martin; Ecklund, Stanley; Novokhatski, Alexander; Seeman, John; Wienands, Ulrich

2005-01-01

The success of the two B-Factories (PEP-II and KEKB) has encouraged us to look at design parameters for a B-Factory with a 30-50 times increase in the luminosity of the present machines (L~1e36). In order to achieve this high luminosity, the beta y* values are reduced to 3-2 mm, the bunch spacing is minimized (0.6-0.3 m) and the bunch currents are increased. Total beam currents range from 5-25 A. The interaction region (IR) of these "SuperB" designs presents special challenges. Synchrotron radiation fans from local bending in shared magnets and from upstream sources pose difficulties due to the high power levels in these fans. High-order-mode(HOM)heating, effects that have been seen in the present B-factories, will become much more pronounced with the very short bunches and high beam currents. Masking the detector beam pipe from synchrotron radiation must take into account effects of HOM power generation. Backgrounds that are a function of the luminosity will become very important. We presen...

The Antecedent Variables of Quality of Life Among Female Factory Workers

Directory of Open Access Journals (Sweden)

Sylvia Diana Purba

2017-08-01

Full Text Available This study aims to examine the quality of life of female factory workers that is hypothesized as affected by work-family conflict and job satisfaction and moderated by perceived organizational support and labor union support. The respondents of the research are female factory workers who are already married and have children, in which 158 respondents are from Jabodetabek and 66 are from Batam. The result shows that work-family conflict significantly decreases quality of life, and perceived organizational support also has a significant positive moderating effect toward quality of life. The quality of life is affected by job satisfaction and work-family conflict but not moderated by labor union support. This research describes that although the work-family conflict of female factory workers has no influence on job satisfaction but it reduces the quality of life directly with the result that job satisfaction is not an intervening variable.

Bulgar Factories (Trading Posts) in the Kama River Area as a Factor of Adjustment to Feudalism

Science.gov (United States)

Krylasova, Natalia B.; Belavin, Andrei M.; Podosenova, Yulia A.

2016-01-01

At the start of the 2nd ML AD a number of trading posts, or factories, emerged in the Cis-Ural region with participation of Bulgar handicraftsmen and merchants. They were townships populated by various ethnic groups. Several centuries later similar factories were set up by natives of the Cis-Ural region in Western Siberia. These factories have…

The Virtual Debt Factory: Towards an Analysis of Debt and Abstraction in the American Credit Crisis

Directory of Open Access Journals (Sweden)

Vincent R. Manzerolle

2010-08-01

Full Text Available Emanating from the United States, the ongoing global credit crisis has provided important insights into a shady new area of capitalist exploitation: the consumer debt factory. In an effort to speed up and quantifiably increase the circulation of consumer credit to match the consumption needs of post-Fordist accumulation, this industry—comprising financial institutions, consumer database companies, and credit rating agencies—has created a highly detailed body of information to stand-in for the corporeal self. This paper therefore examines this industry’s conceptualization of the self as a disembodied mechanism for mass-producing debt, creating a highly volatile informational commodity divorced from all material constraints. In using the credit crisis as a focal point, this paper considers how the far-reaching credit apparatus at the heart of the debt factory gives rise to the fatal abstractions that support, and ultimately undermine, contemporary capitalist economies. By substituting data for flesh, the credit industry has created an antagonism between the material and informational forms of the self, resulting in the construction of a virtual debtors prison. The ensuing analysis will highlight both the exploitative nature of this bifurcation as well as its profound contradictions.

Does a population-based multi-factorial lifestyle intervention increase social inequality in dietary habits?

DEFF Research Database (Denmark)

Toft, Ulla; Jakobsen, Iris Marie; Aadahl, Mette

2012-01-01

To investigate whether the effect of an individualised multi-factorial lifestyle intervention on dietary habits differs across socioeconomic groups.......To investigate whether the effect of an individualised multi-factorial lifestyle intervention on dietary habits differs across socioeconomic groups....

Energy efficiency enhancement in cement factories using expert system

International Nuclear Information System (INIS)

Effatnejad, R.; Jadih, S.

2001-01-01

Full text : In this paper, expert system for energy efficiency in cement industry is presented. Due to the fact that cement manufacturing project in these factories are similar, so in main parts knowing the consumption origins and save potential and existing approaches can be similar. In this method, via expert system software of prolog AH types of energy consumption and investment costs are listed in which method of best first search and innovative search have been used and by forming knowledge base, targeting to get best approaches is presented. The obtained results, regarding the executed limits, will be displayed in the output of program and this program can be given the best decision about energy management in cement factories

A method to identify energy efficiency measures for factory systems based on qualitative modeling

CERN Document Server

Krones, Manuela

2017-01-01

Manuela Krones develops a method that supports factory planners in generating energy-efficient planning solutions. The method provides qualitative description concepts for factory planning tasks and energy efficiency knowledge as well as an algorithm-based linkage between these measures and the respective planning tasks. Its application is guided by a procedure model which allows a general applicability in the manufacturing sector. The results contain energy efficiency measures that are suitable for a specific planning task and reveal the roles of various actors for the measures’ implementation. Contents Driving Concerns for and Barriers against Energy Efficiency Approaches to Increase Energy Efficiency in Factories Socio-Technical Description of Factory Planning Tasks Description of Energy Efficiency Measures Case Studies on Welding Processes and Logistics Systems Target Groups Lecturers and Students of Industrial Engineering, Production Engineering, Environmental Engineering, Mechanical Engineering Practi...

Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

OpenAIRE

Sackey, S. M.; Bester, A.; Adams, D.

2017-01-01

To manage the impact of Industry 4.0 on industrial engineering (IE) education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE...

Diamond Growth in the Subduction Factory

Science.gov (United States)

Bureau, H.; Frost, D. J.; Bolfan-Casanova, N.; Leroy, C.; Estève, I.

2014-12-01

Natural diamonds are fabulous probes of the deep Earth Interior. They are the evidence of the deep storage of volatile elements, carbon at first, but also hydrogen and chlorine trapped as hydrous fluids in inclusions. The study of diamond growth processes in the lithosphere and mantle helps for our understanding of volatile elements cycling between deep reservoirs. We know now that inclusion-bearing diamonds similar to diamonds found in nature (i.e. polycrystalline, fibrous and coated diamonds) can grow in hydrous fluids or melts (Bureau et al., GCA 77, 202-214, 2012). Therefore, we propose that the best environment to promote such diamonds is the subduction factory, where highly hydrous fluids or melts are present. When oceanic plates are subducted in the lithosphere, they carry an oceanic crust soaked with seawater. While the slabs are traveling en route to the mantle, dehydration processes generate saline fluids highly concentrated in NaCl. In the present study we have experimentally shown that diamonds can grow from the saline fluids (up to 30 g/l NaCl in water) generated in subducted slabs. We have performed multi-anvil press experiments at 6-7 GPa and from 1300 to 1400°C during 6:00 hours to 30:00 hours. We observed large areas of new diamond grown in epitaxy on pure diamond seeds in salty hydrous carbonated melts, forming coated gems. The new rims are containing multi-component primary inclusions. Detailed characterizations of the diamonds and their inclusions have been performed and will be presented. These experimental results suggest that multi-component salty fluids of supercritical nature migrate with the slabs, down to the deep mantle. Such fluids may insure the first stage of the deep Earth's volatiles cycling (C, H, halogen elements) en route to the transition zone and the lower mantle. We suggest that the subduction factory may also be a diamond factory.

Business plan Feed Factory Zambezi Valley, Mozambique

NARCIS (Netherlands)

Vernooij, A.G.; Wilschut, S.

2015-01-01

This business plan focuses on the establishment of a poultry feed factory, one of the essential elements of a sustainable and profitable poultry meat value chain. There is a growing demand for poultry meat in the Tete Province, and currently a large part of the consumed broilers come from other

Optimized Neutrino Factory for small and large θ13

International Nuclear Information System (INIS)

Agarwalla, Sanjib Kumar

2013-01-01

Recent results from long baseline neutrino oscillation experiments point towards a non-zero value of θ 13 at around 3σ confidence level. In the coming years, further ratification of this result with high significance will have crucial impact on the planning of the future long baseline Neutrino Factory setup aimed to explore leptonic CP violation and the neutrino mass ordering. In this talk, we discuss the baseline and energy optimization of the Neutrino Factory including the latest simulation results on the magnetized iron neutrino detector (MIND) in the light of both small and large θ 13 . We find that in case of small θ 13 , baselines of about 2500 to 5000 km is the optimal choice for the CP violation measurement with E μ as low as 12 GeV can be considered. However, for large θ 13 , we show that the lower threshold and the backgrounds reconstructed at lower energies allow in fact for muon energies as low as 5 to 8 GeV at considerably shorter baselines, such as Fermilab to Homestake. This suggests that with the latest MIND simulation, low- and high-energy versions of the Neutrino Factory are just two different forms of the same experiment optimized for different regions of the parameter space.

Engineering redox homeostasis to develop efficient alcohol-producing microbial cell factories.

Science.gov (United States)

Zhao, Chunhua; Zhao, Qiuwei; Li, Yin; Zhang, Yanping

2017-06-24

The biosynthetic pathways of most alcohols are linked to intracellular redox homeostasis, which is crucial for life. This crucial balance is primarily controlled by the generation of reducing equivalents, as well as the (reduction)-oxidation metabolic cycle and the thiol redox homeostasis system. As a main oxidation pathway of reducing equivalents, the biosynthesis of most alcohols includes redox reactions, which are dependent on cofactors such as NADH or NADPH. Thus, when engineering alcohol-producing strains, the availability of cofactors and redox homeostasis must be considered. In this review, recent advances on the engineering of cellular redox homeostasis systems to accelerate alcohol biosynthesis are summarized. Recent approaches include improving cofactor availability, manipulating the affinity of redox enzymes to specific cofactors, as well as globally controlling redox reactions, indicating the power of these approaches, and opening a path towards improving the production of a number of different industrially-relevant alcohols in the near future.

Fame Factory: Performing Gender and Sexuality in Talent Reality Television

Directory of Open Access Journals (Sweden)

Hillevi Ganetz

2011-10-01

Full Text Available This article discusses how gender and sexuality are performed in a highly feminised cultural symbolic context. The object of study is a reality show where the contestants compete in mainstream popular music. Fame Factory is a Swedish talent-hunt television series with many similarities to Pop Idol. The audience may follow the struggle of the young artists off stage in the ‘Fame School’ in addition to seeing and voting on their feats on stage. In the Fame School they learn to sing, perform and dance, but also to perform masculinity, femininity and sexuality, even if this is not explicit. Through an analysis of some key episodes of this reality show, the article discusses how gender and sexuality are produced and reproduced within this music television context. It is shown how the performances rest on highly traditional conceptions of these categories, but there are also certain transgressions, especially concerning sexuality, which undermine hegemonic structures.

R and D Toward a Neutrino Factory and Muon Collider

International Nuclear Information System (INIS)

Zisman, Michael S.

2011-01-01

Significant progress has been made in recent years in R and D towards a neutrino factory and muon collider. The U.S. Muon Accelerator Program (MAP) has been formed recently to expedite the R and D efforts. This paper will review the U.S. MAP R and D programs for a neutrino factory and muon collider. Muon ionization cooling research is the key element of the program. The first muon ionization cooling demonstration experiment, MICE (Muon Ionization Cooling Experiment), is under construction now at RAL (Rutherford Appleton Laboratory) in the UK. The current status of MICE will be described.

Tau/Charm Factory Accelerator Report

OpenAIRE

M. E. BiaginiINFN, Laboratori Nazionali Frascati, Italy; R. BoniINFN, Laboratori Nazionali Frascati, Italy; M. BoscoloINFN, Laboratori Nazionali Frascati, Italy; A. ChiarucciINFN, Laboratori Nazionali Frascati, Italy; R. CiminoINFN, Laboratori Nazionali Frascati, Italy; A. ClozzaINFN, Laboratori Nazionali Frascati, Italy; A. DragoINFN, Laboratori Nazionali Frascati, Italy; S. GuiducciINFN, Laboratori Nazionali Frascati, Italy; C. LigiINFN, Laboratori Nazionali Frascati, Italy; G. MazzitelliINFN, Laboratori Nazionali Frascati, Italy; R. RicciINFN, Laboratori Nazionali Frascati, Italy; C. SanelliINFN, Laboratori Nazionali Frascati, Italy; M. SerioINFN, Laboratori Nazionali Frascati, Italy; A. StellaINFN, Laboratori Nazionali Frascati, Italy; S. TomassiniINFN, Laboratori Nazionali Frascati, Italy

2014-01-01

The present Report concerns the current status of the Italian Tau/Charm accelerator project and in particular discusses the issues related to the lattice design, to the accelerators systems and to the associated conventional facilities. The project aims at realizing a variable energy Flavor Factory between 1 and 4.6 GeV in the center of mass, and succeeds to the SuperB project from which it inherits most of the solutions proposed in this document. The work comes from a cooperation involving t...

The tourist function in a car factory Audi Forum Ingolstadt example

Directory of Open Access Journals (Sweden)

Cudny Waldemar

2016-09-01

Full Text Available The article presents modern car industry and tourism issues. It is a case study of a multifunctional centre - the Audi Forum Ingolstadt, situated next to a large Audi factory in Ingolstadt, Germany. It was created in order to promote the Audi brand and provide service for the customers picking up their cars in Ingolstadt. It also performs tourist functions as it focuses on providing service for the people who arrive to visit the car factory, the Audi museum mobile and the region. The centre offers specific tourist products based on particular experiences, which may be included in industrial tourism. The facilities in the Audi Forum Ingolstadt are tourist assets in themselves; they may also be seen as tourist infrastructure. It is also a place where numerous events are held, attracting tourists. The Audi Forum Ingolstadt is an example of a multifunctional centre with distinctive tourist functions, situated on the premises of a large modern car factory.

Vitamin A deficiency among adolescent female garment factory workers in Bangladesh.

Science.gov (United States)

Ahmed, F; Hasan, N; Kabir, Y

1997-10-01

To investigate the prevalence of vitamin A deficiency among adolescent female factory workers in Bangladesh, and examine the association between various factors and vitamin A status. A cross-sectional study. Garment factories in Dhaka city, Bangladesh. Three hundred and eighty eight adolescent girls aged 12-19 y from ten garment factories were selected randomly for the present study. Information on socio-economic conditions and usual pattern of dietary intake were obtained by interview. Anthropometric data and blood samples were collected following the interview. By NCHS reference standard, 15.5% of the participants were thin ( 120% Wt/Ht). In about 56%, serum vitamin A level was below the adequate level of 1.05 mumol/l, with 14% having vitamin A deficiency (Bangladesh, although the anthropometric indices suggest that they do not suffer from acute under nutrition. Consumption of DGLV appears to have an important relation with the vitamin A status of these girls.

Bioretention Systems: Partial Factorial Designs for Nitrate Removal

Science.gov (United States)

Changes in nutrient loadings are monitored by introducing captured stormwater runoff into eight outdoor rain gardens at EPA’s Urban Water Research Facility in Edison, New Jersey scaled for residential and urban landscapes. The partial factorial design includes non-vegetated meso...

Romanian plant produces protein concentrate from paraffin-nourished yeasts

Energy Technology Data Exchange (ETDEWEB)

1985-01-01

One of the world's few factories in which proteins are produced by continuous biotechnology is located in Romania. Here, at the bioproteins plant, microorganisms are converted into a flour which contains a protein concentrate that is so essential to the fattening of swine, cattle, sheep, fowl, and fish. These microorganisms are Candida type yeasts. The culture medium in which they are grown contains sulfates and phosphates. Paraffin, a petroleum product, supplies the carbon that is essential to the microorganisms viability.

Pump testing - Comparison of factory vs. field test of centrifugal pumps

International Nuclear Information System (INIS)

Fehlau, R.

1992-01-01

Testing of pumps in situ, i.e., as installed in a system, will typically yield somewhat different performance results from the original manufacturer's factory test. This paper discusses some of the reasons for these variations. It shows that the factory test curves can be used for evaluation of initial acceptance tests but not for reference in normal inservice testing (IST). This is the basis for reference values used in American Society of Mechanical Engineers (ASME) Section 11 specifications and the revised ASME Code 1990

Effect of titanium dioxide nanoparticles on the bioavailability, metabolism, and toxicity of pentachlorophenol in zebrafish larvae

International Nuclear Information System (INIS)

Fang, Qi; Shi, Xiongjie; Zhang, Liping; Wang, Qiangwei; Wang, Xianfeng; Guo, Yongyong; Zhou, Bingsheng

2015-01-01

Highlights: • Effects of n-TiO 2 on toxicity of PCP in zebrafish larvae were investigated. • Co-exposure n-TiO 2 enhanced metabolism of PCP to tetrachlorohydroquinone in larvae. • Co-exposure n-TiO 2 increased oxidative damage and developmental toxicity in larvae. • NPs may influence toxicity of associated organic pollutants in the aquatic environment. - Abstract: This study investigated the influence of titanium dioxide nanoparticles (n-TiO 2 ) on the bioavailability, metabolism, and toxicity of pentachlorophenol (PCP) in fish. Zebrafish (Danio rerio) embryos or larvae (2-h post-fertilization) were exposed to PCP (0, 3, 10, and 30 μg/L) alone or in combination with n-TiO 2 (0.1 mg/L) until 6 days post-fertilization. Results showed that n-TiO 2 treatment alone did not induce lipid peroxidation, DNA damage, as well as the generation of reactive oxygen species (ROS) in the larvae. As compared with PCP treatment, the co-exposure of PCP and n-TiO 2 enhanced the induction of ROS generation, eventually leading to lipid peroxidation and DNA damage. The nuclear factor erythroid 2-related factor 2 gene transcriptions were significantly upregulated in both PCP treatment alone and in combination with n-TiO 2 . Chemical analysis and histological examination showed that n-TiO 2 adsorb PCP, and n-TiO 2 are taken up by developing zebrafish larvae; however, PCP content was not enhanced in the presence of n-TiO 2 , but the metabolism of PCP to tetrachlorohydroquinone was enhanced in larvae. The results indicate that n-TiO 2 enhanced the metabolism of PCP and caused oxidative damage and developmental toxicity, suggesting that NPs can influence the fate and toxicity of associated organic pollutants in the aquatic environment

Effect of titanium dioxide nanoparticles on the bioavailability, metabolism, and toxicity of pentachlorophenol in zebrafish larvae

Energy Technology Data Exchange (ETDEWEB)

Fang, Qi [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan 430072 (China); Graduate University of Chinese Academy of Sciences, Beijing 100039 (China); Shi, Xiongjie [College of Life Sciences, Wuhan University, Wuhan 430072 (China); Zhang, Liping [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan 430072 (China); Wang, Qiangwei; Wang, Xianfeng [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan 430072 (China); Graduate University of Chinese Academy of Sciences, Beijing 100039 (China); Guo, Yongyong [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan 430072 (China); Zhou, Bingsheng, E-mail: bszhou@ihb.ac.cn [State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan 430072 (China)

2015-02-11

Highlights: • Effects of n-TiO{sub 2} on toxicity of PCP in zebrafish larvae were investigated. • Co-exposure n-TiO{sub 2} enhanced metabolism of PCP to tetrachlorohydroquinone in larvae. • Co-exposure n-TiO{sub 2} increased oxidative damage and developmental toxicity in larvae. • NPs may influence toxicity of associated organic pollutants in the aquatic environment. - Abstract: This study investigated the influence of titanium dioxide nanoparticles (n-TiO{sub 2}) on the bioavailability, metabolism, and toxicity of pentachlorophenol (PCP) in fish. Zebrafish (Danio rerio) embryos or larvae (2-h post-fertilization) were exposed to PCP (0, 3, 10, and 30 μg/L) alone or in combination with n-TiO{sub 2} (0.1 mg/L) until 6 days post-fertilization. Results showed that n-TiO{sub 2} treatment alone did not induce lipid peroxidation, DNA damage, as well as the generation of reactive oxygen species (ROS) in the larvae. As compared with PCP treatment, the co-exposure of PCP and n-TiO{sub 2} enhanced the induction of ROS generation, eventually leading to lipid peroxidation and DNA damage. The nuclear factor erythroid 2-related factor 2 gene transcriptions were significantly upregulated in both PCP treatment alone and in combination with n-TiO{sub 2}. Chemical analysis and histological examination showed that n-TiO{sub 2} adsorb PCP, and n-TiO{sub 2} are taken up by developing zebrafish larvae; however, PCP content was not enhanced in the presence of n-TiO{sub 2}, but the metabolism of PCP to tetrachlorohydroquinone was enhanced in larvae. The results indicate that n-TiO{sub 2} enhanced the metabolism of PCP and caused oxidative damage and developmental toxicity, suggesting that NPs can influence the fate and toxicity of associated organic pollutants in the aquatic environment.

SEARCH FOR NEW PHYSICS AT A SUPER-B FACTORY.

Energy Technology Data Exchange (ETDEWEB)

BROWDER,T.E.; SONI,A.

2004-01-05

The importance of a Super-B Factory in the search for New Physics, in particular, due to CP-od phase(s) from physics beyond the Standard Model is surveyed. The first point to emphasize is that we know now how to directly measure all three angles of the unitarity triangle very cleanly, i. e. without theoretical assumptions with irreducible theory error {le} 1%; however this requires much more luminosity than is currently available at B-factories. Direct searches via penguin-dominated hadronic modes as well as radiative, pair-leptonic and semi-leptonic decays are also discussed. Null tests of the SM are stressed as these will play a crucial role especially if the effects of BSM phase(s) on B-physics are small.

Evaluation of Airborne MDF Dust Concentration in Furniture Factories

Directory of Open Access Journals (Sweden)

Renilson Luiz Teixeira

2017-10-01

Full Text Available ABSTRACT High concentrations of airborne dust are observed during the cutting of medium density fiberboard (MDF boards. This dust, at first considered just uncomfortable for workers, may be harmful to their health. The objective of this work was to evaluate the concentration of airborne dust during the cutting of medium density fiberboard (MDF. The experiment was developed in the MDF cutting sector of three furniture factories located in the city of Lavras/MG. The results showed that the mean concentrations of total dust suspended in these three furniture factories were above the tolerance limit set by the American Conference of Governmental Industrial Hygienists (ACGIH, giving evidence of a serious problem in these companies related to this type of risk agent.

MODEL PEMBELAJARAN TEACHING FACTORY UNTUK MENINGKATKAN KOMPETENSI SISWA DALAM MATA PELAJARAN PRODUKTIF

Directory of Open Access Journals (Sweden)

Dadang Hidayat M.

2011-11-01

Full Text Available Abstract: The Model of Teaching Factory to Promote Students' Competence in Productive Sub­jects. The present article reports on a research project using the model of six-step teaching factory known as Model TF-6M. This R & D project was aimed at promoting students' competences regarding productive subjects at Vocational Schools. The six steps in the teaching factory model include receiving orders, ana­lyzing orders, stating readiness in executing orders, execution of orders, doing quality control, and handing over products to customers. Prior to the implementation of the steps, the students and teachers made some agreements on the setting up of industrial atmosphere in the school, exercising communication skills, and exercising analysis of orders. The model was developed in the time blocks of six weeks in the fourth semester and six weeks in the fifth semester, which was subsequently followed with an exam on the competences. The results indicate that the model was effective in promoting students' productive competences. Abstrak: Model Pembelajaran Teaching Factory untuk Meningkatkan Kompetensi Siswa dalam Mata Pelajaran Produktif. Model teaching factory enam langkah adalah model pembelajaran hasil penelitian dengan menggunakan metode R&D. Model ini bertujuan meningkatkan kompetensi produktif siswa SMK. Enam langkah dari satu siklus model ini, yaitu menerima pemberi order, menganalisis order, menyatakan kesiapan mengerjakan order, mengerjakan order, melakukan quality control, dan menyerahkan order. Sebelum siklus model dilaksanakan, siswa dengan guru melakukan kesepakatan menciptakan iklim industri di sekolah, melakukan latihan berkomunikasi, dan berlatih menganalisis order. Model dilakukan dalam blok waktu enam minggu pada semester empat, enam minggu pada semester lima dan dilanjutkan dengan uji kompetensi. Hasil penelitian menunjukkan model ini efektif meningkatkan kompetensi produktif siswa.

Determination of the pollution with lead in the batteries factory in Al-Saffera (Aleppo) and surrounding area

International Nuclear Information System (INIS)

Al-Oudat, M.; Al-Kharfan, K.; Al-Shamali, K.

2007-10-01

The study aimed to determine the lead concentrations in the ecosystem surrounding the batteries factory in Al-Saffera. The results showed that the lead levels were very high in both factory area and the surrounding agricultural area. Lead levels in air varied between 12 and 34 μg/m3 in the area outside the factory. The same trends were in both soil and plant samples, and normal washing does not decrease the lead level in plant samples to acceptable levels. Mean lead levels in blood was also high and ranged between 55 and 28 μg /dl for factory workers and village inhabitants respectively. In conclusion the authorities administration must take all necessary procedures to reduce the lead levels in the factory area and in the surrounding area.(Author)

Determination of the pollution with lead in the batteries factory in Al-Saffera (Aleppo) and surrounding area

Energy Technology Data Exchange (ETDEWEB)

Al-Oudat, M; Al-Kharfan, K; Al-Shamali, K [Atomic Energy Commission, Damascus (Syrian Arab Republic), Dept. of Protection and Safety

2007-10-15

The study aimed to determine the lead concentrations in the ecosystem surrounding the batteries factory in Al-Saffera. The results showed that the lead levels were very high in both factory area and the surrounding agricultural area. Lead levels in air varied between 12 and 34 {mu}g/m3 in the area outside the factory. The same trends were in both soil and plant samples, and normal washing does not decrease the lead level in plant samples to acceptable levels. Mean lead levels in blood was also high and ranged between 55 and 28 {mu}g /dl for factory workers and village inhabitants respectively. In conclusion the authorities administration must take all necessary procedures to reduce the lead levels in the factory area and in the surrounding area.(Author)

Muon Colliders and Neutrino Factories

Energy Technology Data Exchange (ETDEWEB)

Kaplan, Daniel M. [IIT, Chicago

2015-05-29

Muon colliders and neutrino factories are attractive options for future facilities aimed at achieving the highest lepton-antilepton collision energies and precision measurements of Higgs boson and neutrino mixing matrix parameters. The facility performance and cost depend on how well a beam of muons can be cooled. Recent progress in muon cooling design studies and prototype tests nourishes the hope that such facilities could be built starting in the coming decade. The status of the key technologies and their various demonstration experiments is summarized. Prospects "post-P5" are also discussed.

Factorial and construct validity of Portuguese version (Brazil Bergen Facebook Addiction Scale

Directory of Open Access Journals (Sweden)

Hugo Rafael de Souza e Silva

Full Text Available ABSTRACT Objective To evaluate factorial and construct validity of the Brazilian Portuguese version of the Bergen Facebook Addiction Scale (BFAS-BR. Methods A sociodemographic questionnaire, the Brazilian Portuguese versions of Online Cognition Scale (OCS-BR and of BFAS-BR were applied to a sample of Health Undergraduate (n = 356. Construct validity evidences were verified through the Confirmatory Factor Analysis. Discriminant validity was examined by correlational analysis between the version of the BFAS-BR and OCS-BR. Results Proposed factorial model of BFAS did not present a good quality adjustment. So, a model restructuring was necessary from behavioral addiction theoretical views and new model presented satisfactory adjustment quality and construct validity evidence. Correlation between both tested scales was strong (ρ = 0.707 and, therefore, they measure the same construct. Conclusion The BFAS-BR show adequate factorial and construct validity.

Rare B decays at B factories

International Nuclear Information System (INIS)

Trabelsi, Karim

2010-01-01

Radiative and Electroweak Penguin Decays are Flavor Changing Neutral Currents (FCNC) occurring in the Standard Model only at the loop level. They are characterized by high sensitivity to New Physics (they can appear in the loop with size comparable to leading SM contributions) and they are Complementary to the direct production of new particles expected at LHC. Huge datasets collected at the two B- factories, BaBar and Belle, have made it possible to explore precisely these decays in exclusive channels and inclusive measurements. b →sγ, b→dγ, b→s l + l - , B + →τν, B→Dτν etc measured provide tests of SM predictions and interesting BSM constraints: Charged Higgs bounds from b →sγ, B + →τν, B + →Dτν; Constraints on Wilson coefficients C 7 , C 9 and C 10 ; and Constraints on |V td |/|V ts |. They provide interesting signatures: B(B + →τ + ν) direct measurement versus CKM fit; and large forward-backward asymmetry of K* l + l - . Final Belle/BaBar data samples are yet to be analyzed and even more interesting results are expected at Super B factories with two orders of magnitude larger data samples

Subjective measures of work-related fatigue in automobile factory employees.

Science.gov (United States)

Guo, Fu; Wang, Tianbo; Ning, Zuojiang

2017-01-01

Work-related fatigue is common among automobile factory employees. The purpose of this study was to assess fatigue of employees at a Chinese automobile factory. 238 employees (119 engineers and 119 workers) participated in this study. The following questionnaires were completed: demographic survey questionnaire, working condition questionnaire (WCQ), functional assessment of chronic illness therapy-fatigue (FACIT-F), subscales of multidimensional fatigue inventory (MFI), and Pittsburgh sleep quality index (PSQI). Both engineers and workers experienced fatigue. The workers (35.6 years old, SD = 6.7) generally felt more fatigue than engineers (42.6 years old, SD = 6.4). The engineers claimed to be more satisfied with the working conditions than workers. The WCQ showed good properties for assessing work-related factors, which were significantly correlated with fatigue (r = 0.568 for engineers and r = 0.639 for workers). For engineers, general fatigue was observed regularly and frequently, and for workers, physical fatigue usually had a long duration. The fatigue was significantly correlated with work-related factors, especially working environment and monotony. For workers, the duration of the work day also affected their fatigue. Some improvements to the working condition in this automobile factory should be considered.

Lactobacilli and pediococci as versatile cell factories - Evaluation of strain properties and genetic tools

DEFF Research Database (Denmark)

Bosma, Elleke Fenna; Förster, Jochen; Nielsen, Alex Toftgaard

2017-01-01

This review discusses opportunities and bottlenecks for cell factory development of Lactic Acid Bacteria (LAB), with an emphasis on lactobacilli and pediococci, their metabolism and genetic tools. In order to enable economically feasible bio-based production of chemicals and fuels in a biorefinery...... factories for biorefinery applications....

NNLO leptonic and hadronic corrections to Bhabha scattering and luminosity monitoring at meson factories

Energy Technology Data Exchange (ETDEWEB)

Carloni Calame, C. [Southampton Univ. (United Kingdom). School of Physics; Czyz, H.; Gluza, J.; Gunia, M. [Silesia Univ., Katowice (Poland). Dept. of Field Theory and Particle Physics; Montagna, G. [Pavia Univ. (Italy). Dipt. di Fisica Nucleare e Teorica; INFN, Sezione di Pavia (Italy); Nicrosini, O.; Piccinini, F. [INFN, Sezione di Pavia (Italy); Riemann, T. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Worek, M. [Wuppertal Univ. (Germany). Fachbereich C Physik

2011-07-15

Virtual fermionic N{sub f}=1 and N{sub f}=2 contributions to Bhabha scattering are combined with realistic real corrections at next-to-next-to-leading order in QED. The virtual corrections are determined by the package BHANNLOHF, and real corrections with the Monte Carlo generators BHAGEN-1PH, HELAC-PHEGAS and EKHARA. Numerical results are discussed at the energies of and with realistic cuts used at the {phi} factory DA{phi}NE, at the B factories PEP-II and KEK, and at the charm/{tau} factory BEPC II. We compare these complete calculations with the approximate ones realized in the generator BABAYAGA rate at NLO used at meson factories to evaluate their luminosities. For realistic reference event selections we find agreement for the NNLO leptonic and hadronic corrections within 0.07% or better and conclude that they are well accounted for in the generator by comparison with the present experimental accuracy. (orig.)

Identification of potentially safe promising fungal cell factories for the production of polyketide natural food colorants using chemotaxonomic rationale

Directory of Open Access Journals (Sweden)

Frisvad Jens C

2009-04-01

of chemotaxonomic tools and a priori knowledge of fungal extrolites is a rational approach towards selection of fungal polyketide pigment producers considering the enormous chemical diversity and biodiversity of ascomycetous fungi. This rationale could be very handy for the selection of potentially safe fungal cell factories not only for polyketide pigments but also for the other industrially important polyketides; the molecular and genetic basis for the biosynthesis of which has not yet been examined in detail. In addition, 4 out of the 10 chemotaxonomically selected promising Penicillium strains were shown to produce extracellular pigments in the liquid media using a solid support indicating future cell factory possibilities for polyketide natural food colorants.

Modelo de Cuadro de Mando para una Software Factory del Sector Financiero

OpenAIRE

Álvarez Pérez, César

2012-01-01

Abstract This work aims to search for KPI’s, Key Performance Indicators which permit to measure productivity of the generation of Financial Software in a Software Factory, which means the workplace where software is developed by using principles and techniques associated to traditional industrial production. A set of new indicators is presented, which together with the already used and more traditional ones, allow us to assess productivity and performance for Software Factory. The ...

A factory concept for processing and manufacturing with lunar material

Science.gov (United States)

Driggers, G. W.

1977-01-01

A conceptual design for an orbital factory sized to process 1.5 million metric tons per year of raw lunar fines into 0.3 million metric tons of manufacturing materials is presented. A conservative approach involving application of present earth-based technology leads to a design devoid of new inventions. Earth based counterparts to the factory machinery were used to generate subsystem masses and lumped parameters for volume and mass estimates. The results are considered to be conservative since technologies more advanced than those assumed are presently available in many areas. Some attributes of potential space processing technologies applied to material refinement and component manufacture are discussed.

Effects of chromium exposure from a cement factory

International Nuclear Information System (INIS)

Isikli, B.; Demir, T.A.; Uerer, S.M.; Berber A.; Akar, T.; Kalyoncu, C.

2003-01-01

The aim of the study was to determine the chromium concentrations of soil and plant specimens taken from a rural area exposed to cement factory emissions and also to determine the blood concentrations and sensitivity conditions observed in humans residing in this rural area. The study was carried out in Cukurhisar, a town in Eskisehir-Turkey, between May 2000 an March 2001. Besides the 108 soil (36 for control) and plant specimens, which were taken from eight different directions from the cement factory, blood samples of the individuals residing in this area were taken from 258 subject (258 for control) following a physical examination, and patch tests were als applied. The chromium concentrations of the soil and plant specimens take from different places in different directions of the factory were higher than in the control areas. The physical examination of subjects did not reveal results different from those of the control group except for the diagnosis of contact dermatitis. The analyses of venous blood samples showed that chromium concentrations were found to be within the reference values given for bot groups, but higher in the subjects (P<0.001). According to the results o patch tests, sensitivity to chromium was found to be more frequent for the subject group than the control group (P<0.05). According to these results clinical tools revealed no toxic effects for the subjects, except contact dermatitis. However, sensitivity to patch tests showed that this subject group has been affected compared to the control group and that this effect increased with age

Determinants of Chronic Respiratory Symptoms among Pharmaceutical Factory Workers

Directory of Open Access Journals (Sweden)

Sahle Asfaw

2018-01-01

Full Text Available Background. Chronic respiratory symptoms including chronic cough, chronic phlegm, wheezing, shortness of breath, and chest pain are manifestations of respiratory problems which are mainly evolved as a result of occupational exposures. This study aims to assess determinants of chronic respiratory symptoms among pharmaceutical factory workers. Methods. A case control study was carried out among 453 pharmaceutical factory workers with 151 cases and 302 controls. Data was collected using pretested and structured questionnaire. The data was analyzed using descriptive statistics and bivariate and multivariate analysis. Result. Previous history of chronic respiratory diseases (AOR = 3.36, 95% CI = 1.85–6.12, family history of chronic respiratory diseases (AOR = 2.55, 95% CI = 1.51–4.32, previous dusty working environment (AOR = 2.26, 95% CI = 1.07–4.78, ever smoking (AOR = 3.66, 95% CI = 1.05–12.72, and service years (AOR = 1.86, 95% CI = 1.16–2.99 showed statistically significant association with chronic respiratory symptoms. Conclusion. Previous history of respiratory diseases, family history of chronic respiratory diseases, previous dusty working environment, smoking, and service years were determinants of chronic respiratory symptoms. Public health endeavors to prevent the burden of chronic respiratory symptoms among pharmaceutical factory workers should target the reduction of adverse workplace exposures and discouragement of smoking.

Pulmonary functions in plastic factory workers: a preliminary study.

Science.gov (United States)

Khaliq, Farah; Singh, Pawan; Chandra, Prakash; Gupta, Keshav; Vaney, Neelam

2011-01-01

Exposure to long term air pollution in the work environment may result in decreased lung functions and various other health problems. A significant occupational hazard to lung functions is experienced by plastic factory workers. The present study is planned to assess the pulmonary functions of workers in the plastic factory where recycling of pastic material was done. These workers were constantly exposed to fumes of various chemicals throughout the day. Thirty one workers of plastic factory were assessed for their pulmonary functions. Parameters were compared with 31 age and sex matched controls not exposed to the same environment. The pulmonary function tests were done using Sibelmed Datospir 120 B portable spirometer. A significant decrease in most of the flow rates (MEF 25%, MEF 50%, MEF 75% and FEF 25-75%) and most of the lung volumes and capacities (FVC, FEV1, VC, TV, ERV, MVV) were observed in the workers. Smoking and duration of exposure were not affecting the lung functions as the non smokers also showed a similar decrement in pulmonary functions. Similarly the workers working for less than 5 years also had decrement in pulmonary functions indicating that their lungs are being affected even if they have worked for one year. Exposure to the organic dust in the work environment should be controlled by adequate engineering measures, complemented by effective personal respiratory protection.

Collective issues related to B-factories

International Nuclear Information System (INIS)

Pestrikov, D.V.

1993-02-01

This report reviews the limitations on the performance of the planned B- and Φ-factories due to the collective interactions of stored bunches. Together with the traditional revision of the limitations due to the single- and multi-bunch interaction with surrounding electrodes, we briefly discuss in this report the limitations on the performance due to collective beam-beam instabilities of colliding beams and instabilities due to the collective interaction of beams with the ions. (author)

Drella&The superstars : factory mole people / Anders Härm

Index Scriptorium Estoniae

Härm, Anders, 1977-

2009-01-01

Andy Warholi elust ja tegevusest dekadentliku stuudio Silver Factory ja punkansambli Velvet Underground loomisel ning ka tema filmidest - Rotermanni soolalaos peetud loeng seoses näitusega "Andy Warhol. His art & life (1928-1987)

Recent progress in neutrino factory and muon collider research within the Muon Collaboration

Directory of Open Access Journals (Sweden)

Mohammad M. Alsharo’a

2003-08-01

Full Text Available We describe the status of our effort to realize a first neutrino factory and the progress made in understanding the problems associated with the collection and cooling of muons towards that end. We summarize the physics that can be done with neutrino factories as well as with intense cold beams of muons. The physics potential of muon colliders is reviewed, both as Higgs factories and compact high-energy lepton colliders. The status and time scale of our research and development effort is reviewed as well as the latest designs in cooling channels including the promise of ring coolers in achieving longitudinal and transverse cooling simultaneously. We detail the efforts being made to mount an international cooling experiment to demonstrate the ionization cooling of muons.

Recent progress in neutrino factory and muon collider research within the muon collaboration

International Nuclear Information System (INIS)

Alsharo'a, Mohammad M.; Ankenbrandt, Charles M.; Atac, Muzaffer; Autin, Bruno R.; Balbekov, Valeri I.; Barger, Vernon D.; Benary, Odette; Bennett, J. Roger J.; Berger, Michael S.; Berg, J. Scott; Berz, Martin; Black, Edgar L.; Blondel, Alain; Bogacz, S. Alex; Bonesini, M.; Bracker, Stephen B.; Bross, Alan D.; Bruno, Luca; Buckley-Geer, Elizabeth J.; Caldwell, Allen C.; Companelli, Mario; Cassel, Kevin W.; Catanesi, M. Gabriela; Chattopadhyay, Swapan; Chou, Weiren; Cline, David B.; Coney, Linda R.; Conrad, Janet M.; Corlett, John N.; Cremaldi, Lucien; Cummings, Mary Anne; Darve, Christine; DeJongh, Fritz; Drozhdin, Alexandr; Drumm, Paul; Elvira, V. Daniel; Errede, Deborah; Fabich, Adrian; Fawley, William M.; Fernow, Richard C.; Ferrario, Massimo; Finley, David A.; Fisch, Nathaniel J.; Fukui, Yasuo; Furman, Miguel A.; Gabriel, Tony A.; Galea, Raphael; Gallardo, Juan C.; Garoby, Roland; Garren, Alper A.; Geer, Stephen H.; Gilardoni, Simone; Van Ginneken, Andreas J.; Ginzburg, Ilya F.; Godang, Romulus; Goodman, Maury; Gosz, Michael R.; Green, Michael A.; Gruber, Peter; Gunion, John F.; Gupta, Ramesh; Haines, John R.; Hanke, Klaus; Hanson, Gail G.; Han, Tao; Haney, Michael; Hartill, Don; Hartline, Robert E.; Haseroth, Helmut D.; Hassanein, Ahmed; Hoffman, Kara; Holtkamp, Norbert; Holzer, E. Barbara; Johnson, Colin; Johnson, Rolland P.; Johnstone, Carol; Jungmann, Klaus; Kahn, Stephen A.; Kaplan, Daniel M.; Keil, Eberhard K.; Kim, Eun-San; Kim, Kwang-Je; King, Bruce J.; Kirk, Harold G.; Kuno, Yoshitaka; Ladran, Tony S.; Lau, Wing W.; Learned, John G.; Lebedev, Valeri; Lebrun, Paul; Lee, Kevin; Lettry, Jacques A.; Lavender, Marco; Li, Derun; Lombardi, Alessandra; Lu, Changguo; Makino, Kyoko; Malkin, Vladimir; Marfatia, D.; McDonald, Kirk T.; Mezzetto, Mauro; Miller, John R.; Mills, Frederick E.; Mocioiu, I.; Mokhov, Nikolai V.; Monroe, Jocelyn; Moretti, Aldred; Mori, Yoshiharu; Neuffer, David V.; Ng, King-Yuen; Norem, James H.

2003-01-01

We describe the status of our effort to realize a first neutrino factory and the progress made in understanding the problems associated with the collection and cooling of muons towards that end. We summarize the physics that can be done with neutrino factories as well as with intense cold beams of muons. The physics potential of muon colliders is reviewed, both as Higgs Factories and compact high energy lepton colliders. The status and timescale of our research and development effort is reviewed as well as the latest designs in cooling channels including the promise of ring coolers in achieving longitudinal and transverse cooling simultaneously. We detail the efforts being made to mount an international cooling experiment to demonstrate the ionization cooling of muons

Development and application of computer-aided design methods for cell factory optimization

DEFF Research Database (Denmark)

Cardoso, Joao

Genetically modified organisms (GMOs) can be used to produce chemicals for everyday applications. Engineering microorganisms is a multidisciplinary task comprising four steps: design, build, test and learn. The design and learn phases rely on computational, statistical models, data analysis...... and machine learning. The process of creating strains with commercially relevant titers is time consuming and expensive. Computer-aided design (CAD) software can help scientists build better strains by providing models and algorithms that can be used to generate and test hypotheses before implementing them...... microbial cell factories. In this PhD thesis we present cameo, a CAD software for metabolic engineering that uses GEMs. State-of-the-art and novel algorithms are implemented in cameo. These algorithms have been made accessible using a high-level API to enable any user to start running them without having...

Productivity improvement with green approach to palm oil factory productivity

Science.gov (United States)

Matondang, N.

2018-02-01

The palm oil factory (POF) processes fresh fruit bunches into crude palm oil (CPO) and palm kernel oil (PKO) by products in the form of liquid and solid waste. One of the solid wastes produced in POF Tanjung Kasau is empty fruit bunches of palm oil (FBPO) which have been burned completely on incinerator tubes so that potentially produces pollutants that pollute the environment. If FBPO waste is managed properly, it will improve the productivity of the company. Therefore, it is necessary to conduct a study to find out how far the increased productivity of the company can reduce their impact on the environment, if FBPO is used as raw material of liquid smoke. The productivity improvement approach is done by Green Productivity concept, by looking at three aspects: environmental, social and economical. Green Productivity aims to protect the environment simultaneously by increasing the productivity of the company. One way is to turn FBPO waste into liquid smoke product is by pyrolysis process. The results showed that turning FBPO solid waste into liquid smoke will increase productivity by 18.18%. Implementation of Green Productivity can improve productivity through the improvement of FBPO waste treatment process which has been done by perfect combustion by pyrolysis process so that waste can be minimized to create environment industry POF clean and friendly environment.

Development of Synechocystis sp. PCC 6803 as a Phototrophic Cell Factory

Directory of Open Access Journals (Sweden)

Fuzhong Zhang

2013-08-01

Full Text Available Cyanobacteria (blue-green algae play profound roles in ecology and biogeochemistry. One model cyanobacterial species is the unicellular cyanobacterium Synechocystis sp. PCC 6803. This species is highly amenable to genetic modification. Its genome has been sequenced and many systems biology and molecular biology tools are available to study this bacterium. Recently, researchers have put significant efforts into understanding and engineering this bacterium to produce chemicals and biofuels from sunlight and CO2. To demonstrate our perspective on the application of this cyanobacterium as a photosynthesis-based chassis, we summarize the recent research on Synechocystis 6803 by focusing on five topics: rate-limiting factors for cell cultivation; molecular tools for genetic modifications; high-throughput system biology for genome wide analysis; metabolic modeling for physiological prediction and rational metabolic engineering; and applications in producing diverse chemicals. We also discuss the particular challenges for systems analysis and engineering applications of this microorganism, including precise characterization of versatile cell metabolism, improvement of product rates and titers, bioprocess scale-up, and product recovery. Although much progress has been achieved in the development of Synechocystis 6803 as a phototrophic cell factory, the biotechnology for “Compounds from Synechocystis” is still significantly lagging behind those for heterotrophic microbes (e.g., Escherichia coli.

Electric utility system benefits of factory packaged GE LM Modular Generator sets

Energy Technology Data Exchange (ETDEWEB)

West, G.

1994-12-31

Electric utility system benefits of factory packaged GE LM modular generator sets are outlined. The following topics are discussed: GE LM gas turbine history, operating experience, maintenance, gas turbine spare engines, modular gas turbine generator sets, typical LM2500 cogeneration plant and STIG cycle plant, factory packaging concept, gas turbine/generator package, performance, comparison, competitive capital cost, phased construction, comparison of revenue requirements, capacity evaluation, heat rate evaluation, fuel evaluation, startup, and dispatch flexibility without maintenance penalty.

Muon physics possibilities at a muon-neutrino factory

NARCIS (Netherlands)

Jungmann, KP

2001-01-01

New intense proton accelerators with above GeV energies and MW beam power, such as they are discussed in connection with neutrino factories, appear to be excellently suited for feeding bright muon sources for low-energy muon science. Muon rates with several orders of magnitude increased flux

Constructing General Orthogonal Fractional Factorial Split-Plot Designs

NARCIS (Netherlands)

Sartono, B.; Goos, P.; Schoen, E.

2015-01-01

While the orthogonal design of split-plot fractional factorial experiments has received much attention already, there are still major voids in the literature. First, designs with one or more factors acting at more than two levels have not yet been considered. Second, published work on nonregular

The factory as a battlefield

Directory of Open Access Journals (Sweden)

Helena Chávez Mac Gregor

Full Text Available The crisis of labour is also one of representation. Some contemporary artists working with moving images have been questioning how to represent capital, labour and the worker. Isaac Julien or Harun Farocki, for example, have focused on interlacing characters - from fiction or reality - with geopolitical spaces in order to present the entanglement of the economical new order with the new forms of labour. The South African artist Simon Gush has shifted from this trend in order to present labour without directly representing the workers. In his artwork there is no longer a search for the political subject as a historical force or for the individuals who occupied its place; instead he leads viewers to a critical reading of an object, allowing a staging of the past from the viewpoint of the present. That is what I think Red does. In this article I explore Gush's connections with Marx, Benjamin and Steyerl to show how Gush's work is part of a critical tradition that has abandoned the subject as the privileged instance of political agency; turning the emphasis of the modern schema upside down, it focuses on the object as the force of emancipation. I would like to suggest that Gush used an object, Mandela's red Mercedes-Benz, to produce another image so that the story told is not necessarily that of a symbol of pacification, but one in which the factory was a battlefield. In this way I explore the emancipatory potencies of the object. What I propose is a reading of Red from the point of view of a return to the thing, where the latter becomes a political force.

Factorial correspondence analysis of fear-related behaviour traits in Japanese quail.

Science.gov (United States)

Mignon-Grasteau, S; Roussot, O; Delaby, C; Faure, J M.; Mills, A; Leterrier, C; Guéméné, D; Constantin, P; Mills, M; Lepape, G; Beaumont, C

2003-02-28

Factorial correspondence analysis was performed on 341 quails from a F2 cross between two lines divergently selected on the duration of tonic immobility over 29 generations. Several fear- or stress-related traits were recorded, i.e. tonic immobility duration, number of inductions needed to induce tonic immobility, open-field behaviour (time spent walking, latency before first movement and number of defecations), asymmetry of tibia lengths and corticosterone concentration after restraint stress. Variables were categorised in classes and analysed by factorial correspondence analysis. The first axis was mostly described by open-field behaviour, and the second by tonic immobility traits (duration of tonic immobility and number of inductions), which showed that these behaviours were almost independent. No relationship was found between axes of the factorial correspondence analysis and corticosterone concentration or asymmetry of tibia lengths, showing that these variables reflected other characteristics of stress susceptibility than those described by tonic immobility and open-field behaviour. These results show that reaction to stress of quails is a multidimensional trait and cannot be summarised by one trait.

Effects of the Factory Reset on Mobile Devices

Directory of Open Access Journals (Sweden)

Riqui Schwamm

2014-09-01

Full Text Available Mobile devices usually provide a “factory-reset” tool to erase user-specific data from the main secondary storage. 9 Apple iPhones, 10 Android devices, and 2 BlackBerry devices were tested in the first systematic evaluation of the effectiveness of factory resets. Tests used the Cellebrite UME-36 Pro with the UFED Physical Analyzer, the Bulk Extractor open-source tool, and our own programs for extracting metadata, classifying file paths, and comparing them between images. Two phones were subjected to more detailed analysis. Results showed that many kinds of data were removed by the resets, but much user-specific configuration data was left. Android devices did poorly at removing user documents and media, and occasional surprising user data was left on all devices including photo images, audio, documents, phone numbers, email addresses, geolocation data, configuration data, and keys. A conclusion is that reset devices can still provide some useful information to a forensic investigation.

Análisis factorial de correspondencias intraclases ponderado

Directory of Open Access Journals (Sweden)

Belén Castro Íñigo

2009-02-01

Full Text Available En este artículo se presenta una técnica de Análisis Factorial útil para el estudio de tablas de datos en las que existe una partición sobre el conjunto de individuos, definida de forma natural. Dicha técnica permite poner de manifiesto las relaciones existentes entre los individuos, pertenecientes a una misma clase, discriminándolos, a su vez, de los componentes de otras clases por los pesos relativos que se asignen a las mismas. Con una selección apropiada de la ponderación asignada a cada clase, la nueva metodología obtiene las variables locales del Análisis Parcial, contando con la ventaja sobre éste de proporcionar una representación de los individuos, como elementos activos, en los ejes locales. Palabras clave: Análisis Factorial de Correspondencias condicionado a un grafo, Grafo de Partición, Inercia Intraclases, Análisis de Diferencias Locales.

A large magnetic detector for the neutrino factory

International Nuclear Information System (INIS)

Cervera, A.; Dydak, F.; Gomez Cadenas, J.J.

2000-01-01

The physics opportunities of the neutrino factory have been the subject of a number of recent studies. It was shown that sensitive measurements of the angle θ 13 , of MSW effects, and of the sign of the atmospheric mass difference Δm 23 2 are possible, and even CP violation in the neutrino mixing matrix may be within reach. The focus of interest is the oscillation ν e →ν μ , which leads in the well-defined neutrino beam of the neutrino factory to 'wrong-sign' muon events. In this paper, we show that a large magnetic detector will be capable of detecting with high efficiency and small backgrounds such wrong-sign muon events. We present a conceptual design of the apparatus and its performance. Various backgrounds are analysed and we demonstrate that they can be sufficiently suppressed by appropriate cuts. We illustrate the performance of the large magnetic detector by its sensitivity to the angle θ 13

Everyday life of Frianovo silk weaving factory workers in XVIII — first quarter of the XIX century

Directory of Open Access Journals (Sweden)

O. GOTOVTSOVA

2014-02-01

Full Text Available Based upon a wide range of archive records, the article covers issues relating to particular aspects of life and living standards of silk weaving factory workers’ families in a village of Fryanovo of Moskovski county in XVIII — fi rst quarter of XIX centuries.Workers’ daily life was signifi cantly infl uenced by living conditions. It is via this article that we analyze dimensions and types of living premises provided to workers by the factory owners, as well as its improvements. The Fryanovo factory offi ce records that remain intact allow consideration of issues relating to food for workers, including sources for providing Fryanovo inhabitants with bread and other food products, the composition and the average amount thereof.One chapter of the article is specifi cally devoted to workers’ worship service attendance, as well as diff erences in religion belief of Fryanovo inhabitants. In addition to the orthodox Christian majority of its population, there were also Catholics and Old Believers among its inhabitants.The issues directly relating to working at the silk weaving factory include work schedule and rules, average age of workers, wage payment methods, as well as workers motivation by the silk weaving factory owner. Considered are the issues relating to employment of children and women at the silk weaving factory. An important part of the research relates to living conditions of non-working population groups: young children, retired and handicaps who were given some money or bread, on monthly bases, by silk weaving factory owners.Medical services for the silk weaving factory workers, personal taxation and other fees, participation by factory workers, in recruitments, penalties and fi nes system as implemented by the silk weaving factory in Fryanovo are also within the spectrum of questions that are discussed within the article.The fi nal chapter of the research points out the village inner life issues, such as alcohol abuse among

Racetrack lattices for the TRIUMF KAON factory

International Nuclear Information System (INIS)

Servranckx, R.V.; Wienands, U.; Craddock, M.K.; Rees, G.H.

1989-03-01

Separated-function racetrack lattices have been developed for the KAON Factory accelerators that have more flexibility than the old circular lattices. Straight sections with zero dispersion are provided for rf cavities and fast injection and extraction, and with controlled dispersion for H - injection and slow extraction. In addition the new lattices have fewer depolarizing resonances than the old circular lattices

Gender bias in nineteenth-century England: Evidence from factory children.

Science.gov (United States)

Horrell, Sara; Oxley, Deborah

2016-09-01

Gender bias against girls in nineteenth-century England has received much interest but establishing its existence has proved difficult. We utilise data on heights of 16,402 children working in northern textile factories in 1837 to examine whether gender bias was evident. Current interpretations argue against any difference. Here our comparisons with modern height standards reveal greater deprivation for girls than for boys. Discrimination is measured in girls' height-for-age score (HAZ) falling eight standard errors below boys' at ages 11, 11.5 and 12 years of age, capturing the very poor performance of factory girls. But this result cannot be taken at face value. We query whether modern standards require adjustment to account for the later timing of puberty in historical populations and develop an alternative. We also test the validity of the age data, considering whether parents were more prone to lie about the ages of their daughters, and question whether the supply of girls was fundamentally different from that of boys. We conclude that neither proposition is justified. Disadvantage to girls remains, although its absence amongst younger children precludes an indictment of culturally founded gender bias. The height data must remain mute on the source of this discrimination but we utilise additional information to examine some hypotheses: occupational sorting, differential susceptibility to disease, poorer nutrition for girls, disproportionate stunting from the effects of nutritional deprivation, and type and amount of work undertaken. Of these we suggest that girls had to do arduous physical labour in the home alongside their factory work. The only (unsubstantiated) alternative is that girls were more likely than boys to be put into factory work below the legal age limit. Both represent forms of gender bias. Copyright © 2016 Elsevier B.V. All rights reserved.

Analysis of the dispersion of air pollutants from a factory Asphalt in Nuevo Vallarta, Nay., Mex

Science.gov (United States)

Carrillo-Gonzalez, F. M.; Gaitán-Rodríguez, M.; Cornejo-López, V. M.; Morales-Hernández, J. C.

2013-12-01

An asphalt factory has operated intermittently near the urban area of Nuevo Vallarta on Banderas Bay, Nayarit, Mex. This factory has emissions that can affect the health of people living in the colonies nearest are Valle Dorado and San Vicente. The dispersion of emissions depends on the wind (sea breeze-land breeze) and the roof of the inversion, these phenomena determined by the density and temperature of the lower layers of the atmosphere. Asphalts are dark colored binder materials, formed by a complex non-volatile hydrocarbon chains and high molecular weight. Asphalts are produced from petroleum, but by a process of evaporation of the volatiles, leaving the asphalt alone. Therefore, the material emitted by the fireplace are mainly low molecular weight hydrocarbons known as polycyclic aromatic hydrocarbons (PAHs). The Emergency Response Guide 2008 developed by various agencies in Canada, U.S. and Mexico mentions that the hydrocarbon gas can have health effects. Animal studies have shown that PAHs can cause harmful effects to the skin, body fluids and some PAHs are carcinogenic. An analysis of the wind field, monthly and seasonal averages for the years 2010 and 2011, recorded in AWS administered by the CEMCO and other stations located near the study area.