WorldWideScience

Sample records for facility asbestos location

  1. Fast Flux Test Facility Asbestos Location Tracking Program

    International Nuclear Information System (INIS)

    REYNOLDS, J.A.

    1999-01-01

    Procedure Number HNF-PRO-408, revision 0, paragraph 1.0, ''Purpose,'' and paragraph 2.0, ''Requirements for Facility Management of Asbestos,'' relate building inspection and requirements for documentation of existing asbestos-containing building material (ACBM) per each building assessment. This documentation shall be available to all personnel (including contractor personnel) entering the facility at their request. Corrective action was required by 400 Area Integrated Annual Appraisal/Audit for Fiscal Year 1992 (IAA-92-0007) to provide this notification documentation. No formal method had been developed to communicate the location and nature of ACBM to maintenance personnel in the Fast Flux Test Facility (FFTF) 400 Area. The scope of this Data Package Document is to locate and evaluate any ACBM found at FFTF which constitutes a baseline. This includes all buildings within the protected area. These findings are compiled from earlier reports, numerous work packages and engineering evaluations of employee findings

  2. Asbestos

    Science.gov (United States)

    ... in dust. People working with or around asbestos (miners, asbestos abatement workers, custodial and maintenance workers, and ... Introduction Treatment Options Side Effects Emotional Challenges Life Planning Summary '; if (window.location.href.indexOf("navigator/concernedpathway") > - ...

  3. Gender differences in asbestos exposure and disease location in 327 patients with mesothelioma

    DEFF Research Database (Denmark)

    Panou, Vasiliki; Weinreich, Ulla Moller; Bak, Jens

    2017-01-01

    Introduction: The Region of North Denmark has a high incidence of malignant mesothelioma (MM) of 6.2/100.000 for men and 1/100.000 for women mainly due to large-scale use of chrysotile asbestos.Aims: The aim of the study is to investigate gender differences in asbestos exposure and disease location...... workers; domestic, referring to patients living with an asbestos worker; environmental, defined as living or working within 10.000 meters from asbestos emitting location; unknown, where no source of asbestos exposure could be identified. MM location was classified as pleural (MPM) or peritoneal (MAM...

  4. Asbestos

    Science.gov (United States)

    Virta, Robert

    2011-01-01

    The term asbestos is a generic designation referring usually to six types of naturally occurring mineral fibers that are or have been commercially exploited. These fibers belong to two mineral groups: serpentines and amphiboles. The serpentine group is represented by a single asbestiform variety-chrysotile. There also are five commercial asbestiform varieties of amphiboles-anthophyllite asbestos, cummingtonite-grunerite asbestos (amosite), riebeckite asbestos (crocidolite), tremolite asbestos, and actinolite asbestos. Amosite and crocidolite are no longer mined. Nearly all of the asbestos mined after the mid-1990s was chrysotile. Only very small amounts of actinolite, anthophyllite, and tremolite asbestos may be mined in a few countries. Asbestos was mined in Argentina, Brazil, Canada, China, India, Kazakhstan, and Russia in 2010; world production was estimated to be 1.97 × 106 tons. Properties that made asbestos valuable for industrial applications were their thermal, electrical, and sound insulation properties; inflammability; matrix reinforcement (cement, plastic, and resins); adsorption capacity (filtration, liquid sterilization); wear and friction properties (friction materials such as brakes and clutches); and chemical inertia (except in acids). These properties led to the use of asbestos in about 3,000 products by the 1960s. Since about 1995, asbestos-cement products, including pipe and sheets, accounted for more than 95% of global asbestos consumption as other uses of asbestos have declined. Global consumption of asbestos was estimated to have been about 1.98 × 106 tons in 2009. The leading consuming countries in 2009 were Brazil, China, India, Russia, and Thailand, each with more than 100,000 tons of consumption.

  5. Green facility location

    NARCIS (Netherlands)

    Velázquez Martínez, J.C.; Fransoo, J.C.; Bouchery, Y.; Corbett, C.J.; Fransoo, J.C.; Tan, T.

    2017-01-01

    Transportation is one of the main contributing factors of global carbon emissions, and thus, when dealing with facility location models in a distribution context, transportation emissions may be substantially higher than the emissions due to production or storage. Because facility location models

  6. Uncapacitated facility location problems: contributions

    Directory of Open Access Journals (Sweden)

    Galvão Roberto Diéguez

    2004-01-01

    Full Text Available The objective of the present paper is to review my personal contributions in the field of uncapacitated facility location problems. These contributions took place throughout my academic career, from the time I was a Ph.D. student at Imperial College to the present day. They cover approximately 30 years, from 1973 to 2003; they address: algorithms developed for the p-median problem and for a general formulation of uncapacitated location problems; the study of dynamic location models; covering and hierarchical location problems; queuing-based probabilistic location models. The contributions encompass theoretical developments, computational algorithms and practical applications. All work took place in an academic environment, with the invaluable collaboration of colleagues (both in Brazil and abroad and research students at COPPE. Each section in the paper is dedicated to a topic that involves a personal contribution. Every one of them is placed within the context of the existing literature.

  7. Modeling discrete competitive facility location

    CERN Document Server

    Karakitsiou, Athanasia

    2015-01-01

    This book presents an up-to-date review of modeling and optimization approaches for location problems along with a new bi-level programming methodology which captures the effect of competition of both producers and customers on facility location decisions. While many optimization approaches simplify location problems by assuming decision making in isolation, this monograph focuses on models which take into account the competitive environment in which such decisions are made. New insights in modeling, algorithmic and theoretical possibilities are opened by this approach and new applications are possible. Competition on equal term plus competition between market leader and followers are considered in this study, consequently bi-level optimization methodology is emphasized and further developed. This book provides insights regarding modeling complexity and algorithmic approaches to discrete competitive location problems. In traditional location modeling, assignment of customer demands to supply sources are made ...

  8. Mesothelioma incidence in the neighbourhood of an asbestos-cement plant located in a national priority contaminated site

    Directory of Open Access Journals (Sweden)

    Lucia Fazzo

    2014-12-01

    Full Text Available BACKGROUND: An epidemic of asbestos-related disease is ongoing in most industrialized countries, mainly attributable to past occupational exposure but partly due to environmental exposure. In this perspective, the incidence of pleural mesothelioma close to a former asbestos-cement plant in a national contaminated site was estimated. METHODS: The census-tracts interested by atmospheric dispersion of facilities in the contaminated site were identified. Two subareas with different estimated environmental asbestos impact were distinguished. An ecological study at micro-geographic level was performed. The standardized incidence ratios (SIR for study area and the two subareas, in comparison with region and municipality were computed. The standardized incidence rate ratio (IRR between the two subareas was computed. RESULTS: Mesothelioma incidence in the study area was increased: 46 cases were observed with respect to 22.23 expected (SIR: 2.02. The increase was confirmed in analysis considering only the subjects without an occupationally exposure to asbestos: 19 cases among men (SIR = 2.48; 95% CI: 1.49-3.88; 11 case among women (SIR = 1.34; 95% CI: 0.67-2.40. The IRR between the two subareas is less than one in overall population considering all age-classes and of 3 fold (IRR = 3.14, 95% CI: 0.65-9.17 in the age-classes below 55 years. CONCLUSIONS: The findings indicate an increased incidence of pleural mesothelioma in the neighbourhood of asbestos-cement plant, and a possible etiological contribution of asbestos environmental exposure in detected risks.

  9. Recycling Facilities - Land Recycling Cleanup Locations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Land Recycling Cleanup Location Land Recycling Cleanup Locations (LRCL) are divided into one or more sub-facilities categorized as media: Air, Contained Release or...

  10. Technical and economic assessment for asbestos abatement within Facility 20470, Wright-Patterson Air Force Base, Ohio

    International Nuclear Information System (INIS)

    Gibson, S.M.; Ogle, R.B.

    1988-03-01

    This report presents the results of a technical and economic assessment of available alternatives for asbestos abatement within Facility 20470 at the Wright-Patterson Air Force Base in Dayton, Ohio. Each alternative was screened on the basis of technical feasibility, environmental impact, economics, and fulfillment of the IRP goals. Four alternatives for study are: establishing a special operations and maintenance program; enclosure; encapsulation with sealants; and removal, disposal, and replacement. Each of these alternatives was assessed for capability to control the release of asbestos fibers within Facility 20470. Alternatives 1 and 4 were determined to be acceptable, while Alternatives 2 and 3 were found to be unacceptable. 2 refs., 6 figs

  11. Figure 5, Biofuel refinery facility locations

    Data.gov (United States)

    U.S. Environmental Protection Agency — This workbook contains the locations and types of current and anticipated biofuel feedstock processing facilities assumed under the simulated scenarios. This dataset...

  12. Location - Managed Facility - St. Paul District (MVP)

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — St. Paul District - US Army Corps of Engineers Managed Facility locations. District headquarters, Natural Resource, Recreation, Lock and Dam, and Regulatory offices...

  13. Robust facility location: Hedging against failures

    International Nuclear Information System (INIS)

    Hernandez, Ivan; Emmanuel Ramirez-Marquez, Jose; Rainwater, Chase; Pohl, Edward; Medal, Hugh

    2014-01-01

    While few companies would be willing to sacrifice day-to-day operations to hedge against disruptions, designing for robustness can yield solutions that perform well before and after failures have occurred. Through a multi-objective optimization approach this paper provides decision makers the option to trade-off total weighted distance before and after disruptions in the Facility Location Problem. Additionally, this approach allows decision makers to understand the impact on the opening of facilities on total distance and on system robustness (considering the system as the set of located facilities). This approach differs from previous studies in that hedging against failures is done without having to elicit facility failure probabilities concurrently without requiring the allocation of additional hardening/protections resources. The approach is applied to two datasets from the literature

  14. Prioritizing Asbestos Removal from Various Facilities Using the INSIGHT II+ Expert System

    Science.gov (United States)

    1986-07-01

    34chronic lung disease" (30), the Johns-Manville Company was established in 1902. This company was to play a dramatic role , socially, politically and...determine recommendations for controlling the asbestos fiber release from the ACM. ’Pr iasbes ’ queries the user about the condition of the ACM through

  15. A Dual-Based Procedure for Dynamic Facility Location

    OpenAIRE

    Tony J. Van Roy; Donald Erlenkotter

    1982-01-01

    In dynamic facility location problems, one desires to select the time-staged establishment of facilities at different locations so as to minimize the total discounted costs for meeting demands specified over time at various customer locations. We formulate a particular dynamic facility location problem as a combinatorial optimization problem. The formulation permits both the opening of new facilities and the closing of existing ones. A branch-and-bound procedure incorporating a dual ascent me...

  16. A localization property for facility location problems with arbitrary norms

    DEFF Research Database (Denmark)

    Juel, Henrik; Love, Robert F.

    1988-01-01

    In an earlier article (1983), the authors showed that, for facilities-location problems characterized by generalized distance norms and any even number of existing facilities, the optimal location of the new facility is at the intersection of the lines joining the pairs of facilities if these lin...

  17. 14 CFR 21.43 - Location of manufacturing facilities.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Location of manufacturing facilities. 21.43... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.43 Location of manufacturing facilities... location of the manufacturer's facilities places no undue burden on the FAA in administering applicable...

  18. Sandia National Laboratories: Locations: Kauai Test Facility

    Science.gov (United States)

    Locations Contact Us Employee Locator Search Menu About Leadership Mission Social Media Community History Diversity Social Media Careers View All Jobs Students & Postdocs Benefits & Perks Hiring Technology Deployment Centers New Mexico Small Business Assistance Program Sandia's Economic Impact Sandia

  19. The solution of location problems with certain existing facility structures

    DEFF Research Database (Denmark)

    Juel, Henrik; Love, Robert F.

    1983-01-01

    It is known that in the Euclidean distance case, the optimal minisum location of a new facility in relation to four existing facilities is at the intersection of the two lines joining two pairs of the facilities. The authors extend this concept to minisum problems having any even number of existing...... facilities and characterized by generalized distance norms...

  20. A hybrid nested partitions algorithm for banking facility location problems

    KAUST Repository

    Xia, Li; Yin, Wenjun; Dong, Jin; Wu, Teresa; Xie, Ming; Zhao, Yanjia

    2010-01-01

    The facility location problem has been studied in many industries including banking network, chain stores, and wireless network. Maximal covering location problem (MCLP) is a general model for this type of problems. Motivated by a real-world banking

  1. Spatial interaction models facility location using game theory

    CERN Document Server

    D'Amato, Egidio; Pardalos, Panos

    2017-01-01

    Facility location theory develops the idea of locating one or more facilities by optimizing suitable criteria such as minimizing transportation cost, or capturing the largest market share. The contributions in this book focus an approach to facility location theory through game theoretical tools highlighting situations where a location decision is faced by several decision makers and leading to a game theoretical framework in non-cooperative and cooperative methods. Models and methods regarding the facility location via game theory are explored and applications are illustrated through economics, engineering, and physics. Mathematicians, engineers, economists and computer scientists working in theory, applications and computational aspects of facility location problems using game theory will find this book useful.

  2. Multiple criteria facility location probems : a survey

    NARCIS (Netherlands)

    Farahani, R.Z.; Steadie Seifi, M.; Asgari, N.

    2010-01-01

    This paper provides a review on recent efforts and development in multi-criteria location problems in three categories including bi-objective, multi-objective and multi-attribute problems and their solution methods. Also, it provides an overview on various criteria used. While there are a few

  3. Congestion Service Facilities Location Problem with Promise of Response Time

    Directory of Open Access Journals (Sweden)

    Dandan Hu

    2013-01-01

    Full Text Available In many services, promise of specific response time is advertised as a commitment by the service providers for the customer satisfaction. Congestion on service facilities could delay the delivery of the services and hurts the overall satisfaction. In this paper, congestion service facilities location problem with promise of response time is studied, and a mixed integer nonlinear programming model is presented with budget constrained. The facilities are modeled as M/M/c queues. The decision variables of the model are the locations of the service facilities and the number of servers at each facility. The objective function is to maximize the demands served within specific response time promised by the service provider. To solve this problem, we propose an algorithm that combines greedy and genetic algorithms. In order to verify the proposed algorithm, a lot of computational experiments are tested. And the results demonstrate that response time has a significant impact on location decision.

  4. The facility location problem for hyper-rectilinear distances

    DEFF Research Database (Denmark)

    Juel, Henrik; Love, Robert F.

    1985-01-01

    Hyper-rectilinear distances correspond to the l p distance function for 0 travel distances between pairs of points are generally greater than rectilinear distances. In this paper we examine the single facility location problem when hyper...

  5. On Pure and (approximate) Strong Equilibria of Facility Location Games

    DEFF Research Database (Denmark)

    Hansen, Thomas Dueholm; Telelis, Orestis A.

    2008-01-01

    We study social cost losses in Facility Location games, where n selfish agents install facilities over a network and connect to them, so as to forward their local demand (expressed by a non-negative weight per agent). Agents using the same facility share fairly its installation cost, but every...... agent pays individually a (weighted) connection cost to the chosen location. We study the Price of Stability (PoS) of pure Nash equilibria and the Price of Anarchy of strong equilibria (SPoA), that generalize pure equilibria by being resilient to coalitional deviations. For unweighted agents on metric...

  6. On a rational stopping rule for facilities location algorithms

    DEFF Research Database (Denmark)

    Juel, Henrik

    1984-01-01

    In the multifacility location problem, a number of new facilities are to be located so as to minimize a sum of weighted distances. Love and Yeong (1981) developed a lower bound on the optimal value for use in deciding when to stop an iterative solution procedure. The authors develop a stronger...

  7. Uncapacitated facility location problem with self-serving demands

    African Journals Online (AJOL)

    facility locations together with servers in J P . Define decision variables xij and yj as in ... The Erlenkotter algorithm is a heuristic weak-dual based method for UFLP. ..... 119–171 in Mirchandani PB & Francis RL (Eds), Discrete location theory, ...

  8. Combined Simulated Annealing Algorithm for the Discrete Facility Location Problem

    Directory of Open Access Journals (Sweden)

    Jin Qin

    2012-01-01

    Full Text Available The combined simulated annealing (CSA algorithm was developed for the discrete facility location problem (DFLP in the paper. The method is a two-layer algorithm, in which the external subalgorithm optimizes the decision of the facility location decision while the internal subalgorithm optimizes the decision of the allocation of customer's demand under the determined location decision. The performance of the CSA is tested by 30 instances with different sizes. The computational results show that CSA works much better than the previous algorithm on DFLP and offers a new reasonable alternative solution method to it.

  9. Asbestos: Protect Your Family

    Science.gov (United States)

    ... Related Topics: Asbestos Contact Us Share Protect Your Family How to Identify Materials That May Contain Asbestos ... Improper removal may actually increase your and your family’s exposure to asbestos fibers. Top of Page Asbestos ...

  10. Asbestos manufacturing plants in Poland

    Directory of Open Access Journals (Sweden)

    Wilk Ewa

    2014-06-01

    Full Text Available The unique set of physical and chemical properties of asbestos has led to its many industrial applications, such as roof coverings, textiles, rope, cord and yarn, paper, friction and composition materials, household product, acid-resistant filters, packing, insulation, and certain types of lagging, amongst others. In Poland asbestos-containing products were manufactured from raw materials imported mainly from the former Soviet Union, with production launched at the beginning of 20th century. According to Annex 4 to the Act of 19 June 1997 on the prohibition of the use of asbestos-containing products, there were 28 asbestos manufacturing plants in Poland located in 11 provinces throughout the country. The current survey was undertaken to enable asbestos manufacturing plants to be arranged, described and divided in order to contribute to further surveys.

  11. Directions in locational conflict research: Voting on the location of nuclear waste disposal facilities

    International Nuclear Information System (INIS)

    Shelley, F.M.; Murauskas, G.T.

    1985-01-01

    It is clear from empirical evidence that currently significant locational conflicts concerning the siting of nuclear waste disposal facilities cannot be modeled under the standard noxious facility location paradigm that views locational conflict as conflict between regions. Rather, local populations are characterized by sharp disagreements as to whether the proposed facility is in fact salutary or noxious. Thus, conflict concerning nuclear waste disposal must be understood as a conflict among preferences and values, rather than among competing, areally defined interest groups. This has significant implications for the outcomes of political processes leading to siting decisions, as indicated in this paper. Whether intransivity occurs depends on the location and proportion of persons with different preference orderings concerning possible outcomes. Further research on this issue can and should be directed to further mathematical specification of these conditions along with empirical analysis where appropriate

  12. Uncapacitated facility location problem with self-serving demands

    Directory of Open Access Journals (Sweden)

    E Monabbati

    2013-12-01

    Full Text Available In classical uncapacitated facility location problems (UFLP the goal is to satisfy requirements of some demand points by setting up some servers, among potential facility locations, such that the total cost including service costs and fixed costs are minimized. In this paper a generalization of UFLP is considered in which some demand points, called self-serving, could be served exclusively by a new server at that point. Numerical experiments show that near optimal solutions are achieved by the proposed method.

  13. A Probabilistic, Facility-Centric Approach to Lightning Strike Location

    Science.gov (United States)

    Huddleston, Lisa L.; Roeder, William p.; Merceret, Francis J.

    2012-01-01

    A new probabilistic facility-centric approach to lightning strike location has been developed. This process uses the bivariate Gaussian distribution of probability density provided by the current lightning location error ellipse for the most likely location of a lightning stroke and integrates it to determine the probability that the stroke is inside any specified radius of any location, even if that location is not centered on or even with the location error ellipse. This technique is adapted from a method of calculating the probability of debris collisionith spacecraft. Such a technique is important in spaceport processing activities because it allows engineers to quantify the risk of induced current damage to critical electronics due to nearby lightning strokes. This technique was tested extensively and is now in use by space launch organizations at Kennedy Space Center and Cape Canaveral Air Force Station. Future applications could include forensic meteorology.

  14. Optimal Facility Location Tool for Logistics Battle Command (LBC)

    Science.gov (United States)

    2015-08-01

    64 Appendix B. VBA Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Appendix C. Story...should city planners have located emergency service facilities so that all households (the demand) had equal access to coverage?” The critical...programming language called Visual Basic for Applications ( VBA ). CPLEX is a commercial solver for linear, integer, and mixed integer linear programming problems

  15. A spatial decision support system for special health facility location ...

    African Journals Online (AJOL)

    Access to healthcare is a determinant of the wellbeing of the people. Planning the location and distribution of health facilities to ensure efficiency and equity in the face of limited resources can be challenging, especially where the type of care requires expensive equipments and specialists. This study attempts to provide a ...

  16. 75 FR 19555 - NARA Facility Locations and Hours

    Science.gov (United States)

    2010-04-15

    ... at 41 CFR part 101-20. The National Archives at Philadelphia on Market Street (in Philadelphia) and... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION 36 CFR Parts 1200, 1253, and 1280 [FDMS Docket NARA-10-0002] RIN 3095-AB66 NARA Facility Locations and Hours AGENCY: National Archives and Records...

  17. A hybrid nested partitions algorithm for banking facility location problems

    KAUST Repository

    Xia, Li

    2010-07-01

    The facility location problem has been studied in many industries including banking network, chain stores, and wireless network. Maximal covering location problem (MCLP) is a general model for this type of problems. Motivated by a real-world banking facility optimization project, we propose an enhanced MCLP model which captures the important features of this practical problem, namely, varied costs and revenues, multitype facilities, and flexible coverage functions. To solve this practical problem, we apply an existing hybrid nested partitions algorithm to the large-scale situation. We further use heuristic-based extensions to generate feasible solutions more efficiently. In addition, the upper bound of this problem is introduced to study the quality of solutions. Numerical results demonstrate the effectiveness and efficiency of our approach. © 2010 IEEE.

  18. Ensuring the safety of nuclear facilities located in large cities

    International Nuclear Information System (INIS)

    Ryazantsev, E.P.; Kolyadin, V.I.; Bylkin, B.K.; Zverkov, Yu.A.

    2002-01-01

    The problems of ensuring the safety of nuclear facilities and other facilities representing a radiation hazard (hereinafter referred to as 'nuclear facilities') which are located in large cities are considered in the light of the experience with the 'Kurchatov Institute' Russian Research Centre. The accumulation of substantial quantities of spent nuclear fuel and radwaste at the Centre was an inevitable consequence of the military and civilian nuclear research programmes which started there in 1943. A comprehensive programme has been developed for reducing the impact of ionizing radiation on the Centre's personnel, the population living near the Centre and the local environment. The authors describe the basic elements of a programme for decommissioning reactor facilities and eliminating spent fuel and radwaste storage sites and also describe how the programme is progressing. (author)

  19. Personal exposures to asbestos fibers during brake maintenance of passenger vehicles.

    Science.gov (United States)

    Cely-García, María Fernanda; Sánchez, Mauricio; Breysse, Patrick N; Ramos-Bonilla, Juan P

    2012-11-01

    Brake linings and brake pads are among the asbestos-containing products that are readily available in Colombia. When sold separated from their support, brake linings require extensive manipulation involving several steps that include drilling, countersinking, riveting, bonding, cutting, beveling, and grinding. Without this manipulation, brake linings cannot be installed in a vehicle. The manipulation process may release asbestos fibers, which may expose brake mechanics to the fibers. Three brake repair shops located in Bogotá (Colombia) were sampled for 3 or 4 consecutive days using US National Institute for Occupational Safety and Health (NIOSH) methods 7400 and 7402. Standard procedures for quality control were followed during the sampling process, and asbestos samples were analyzed by an American Industrial Hygiene Association accredited laboratory. Personal samples were collected to assess full-shift and short-term exposures. Area samples were also collected close to the brake-lining manipulation equipment and within office facilities. Activities were documented during the sampling process. Using Phase Contrast Microscopy Equivalent counts to estimate air asbestos concentrations, all personal samples [i.e. 8-h time-weighted averages (TWAs) and 30-min personal samples] were in compliance with the US Occupational Safety and Health Administration standards. Personal asbestos concentrations based on transmission electron microscopy counts were extremely high, ranging from 0.006 to 3.493 f cm(-3) for 8-h TWA and from 0.015 to 8.835 f cm(-3) for 30-min samples. All asbestos fibers detected were chrysotile. Cleaning facilities and grinding linings resulted in the highest asbestos exposures based on transmission electron microscopy counts. There were also some samples that did not comply with the NIOSH's recommended exposure limits. The results indicate that the brake mechanics sampled are exposed to extremely high asbestos concentrations (i.e. based on transmission

  20. Linear facility location in three dimensions - Models and solution methods

    DEFF Research Database (Denmark)

    Brimberg, Jack; Juel, Henrik; Schöbel, Anita

    2002-01-01

    We consider the problem of locating a line or a line segment in three-dimensional space, such that the sum of distances from the facility represented by the line (segment) to a given set of points is minimized. An example is planning the drilling of a mine shaft, with access to ore deposits through...... horizontal tunnels connecting the deposits and the shaft. Various models of the problem are developed and analyzed, and efficient solution methods are given....

  1. Asbestos: selected cancers

    National Research Council Canada - National Science Library

    Institute of Medicine; Board on Population Health and Public Health Practice; Institute of Medicine; National Academy of Sciences

    2006-01-01

    ...: Selected Health Effects. This committee was charged with addressing whether asbestos exposure is causally related to adverse health consequences in addition to asbestosis, mesothelioma, and lung cancer. Asbestos...

  2. Location of an electric source facility and local area promotion

    International Nuclear Information System (INIS)

    Shimohirao, Isao

    1999-01-01

    Here were described on energy demand and supply, energy policy and local area promotion policy for basic problems important on location of electric source facilities. At present, co-existence business between electricity business and electric source location area is lacking in its activity. It seems to be necessary to enforce some systems to intend to promote it earnestly, and to effort to promote industry promotions such as introduction of some national projects, induction of electricity cost reduction for a means of business invitation, and so forth. And it is necessary to promote them under cooperations with electricity businesses, governments, universities and communities for the industrial promotion and fixation of the youth at local areas. In order to realize such necessities, further larger efforts are expected for national and local governments. (G.K.)

  3. National Ignition Facility and Managing Location, Component, and State

    Energy Technology Data Exchange (ETDEWEB)

    Foxworthy, C; Fung, T; Beeler, R; Li, J; Dugorepec, J; Chang, C

    2011-07-25

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-Megajoule, 500-Terawatt, ultraviolet laser system coupled with a 10-meter diameter target chamber. There are over 6,200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1,200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

  4. National Ignition Facility and Managing Location, Component, and State

    International Nuclear Information System (INIS)

    Foxworthy, C.; Fung, T.; Beeler, R.; Li, J.; Dugorepec, J.; Chang, C.

    2011-01-01

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-Megajoule, 500-Terawatt, ultraviolet laser system coupled with a 10-meter diameter target chamber. There are over 6,200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1,200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

  5. National Ignition Facility and managing location, component, and state

    Energy Technology Data Exchange (ETDEWEB)

    Foxworthy, Cemil, E-mail: foxworthy3@llnl.gov [Lawrence Livermore National Laboratory, Livermore, CA (United States); Fung, Tracy; Beeler, Rich; Li, Joyce; Dugorepec, Jasna; Chang, Cathy [Lawrence Livermore National Laboratory, Livermore, CA (United States)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer NIF in comprised of over 100k serialized parts that must be tracked and maintained. Black-Right-Pointing-Pointer We discuss a web-based integrated parts management system designed for NIF. Black-Right-Pointing-Pointer The parts database stores associated calibration data with effective dates. Black-Right-Pointing-Pointer The system interfaces with the NIF control system and performance models. Black-Right-Pointing-Pointer Work activity (Permits, Problem Logs, Work Orders) are managed by the system. - Abstract: The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-MJ, 500-TW, ultraviolet laser system coupled with a 10-m diameter target chamber. There are over 6200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements

  6. National Ignition Facility and managing location, component, and state

    International Nuclear Information System (INIS)

    Foxworthy, Cemil; Fung, Tracy; Beeler, Rich; Li, Joyce; Dugorepec, Jasna; Chang, Cathy

    2012-01-01

    Highlights: ► NIF in comprised of over 100k serialized parts that must be tracked and maintained. ► We discuss a web-based integrated parts management system designed for NIF. ► The parts database stores associated calibration data with effective dates. ► The system interfaces with the NIF control system and performance models. ► Work activity (Permits, Problem Logs, Work Orders) are managed by the system. - Abstract: The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-MJ, 500-TW, ultraviolet laser system coupled with a 10-m diameter target chamber. There are over 6200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

  7. Asbestos bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Jentschke, M

    1982-01-01

    The publication of this special bibliography meets the desire for information on the problem of asbestos from the viewpoint of safety at work. It was compiled from the information stored at the Central Institute for Safety at work in Dresden, the Central Institute of Occupational Medicine in Berlin, the Authority for Safety at Work with the Ministry of Building in Berlin and the Medical Service of the Transport Business in Berlin, as well as with specialists from the institutions mentioned and of the authority for Safety at work, occupational hygiene and toxicology in the chemical industry of Halle and the inspector of occupational hygiene of the council of the district of Schwerin. The bibliography is a selection of the information sources available at the above-mentioned institutions. It makes no claim to completeness.

  8. 30 CFR 71.401 - Location of facilities.

    Science.gov (United States)

    2010-07-01

    ... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY HEALTH STANDARDS-SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Surface Bathing Facilities, Change Rooms, and Sanitary Flush Toilet Facilities at Surface Coal Mines § 71.401...

  9. Approximation algorithms for facility location problems with a special class of subadditive cost functions

    NARCIS (Netherlands)

    Gabor, A.F.; Ommeren, van J.C.W.

    2006-01-01

    In this article we focus on approximation algorithms for facility location problems with subadditive costs. As examples of such problems, we present three facility location problems with stochastic demand and exponential servers, respectively inventory. We present a (1+e,1)-reduction of the facility

  10. Huff-type competitive facility location model with foresight in a discrete space

    OpenAIRE

    Milad Gorji Ashtiani; Ahmad Makui; Reza Ramezanian

    2011-01-01

    Consider a chain as leader that wants to open p new facilities in a linear market, like metro. In this market, there is a competitor, called follower. The leader and the follower have established some facilities in advance. When the leader opens p new facilities, its competitor, follower, reacts the leader’s action and opens r new facilities. The optimal locations for leader and follower are chosen among predefined potential locations. Demand is considered as demand points and is assumed inel...

  11. Substation Location in Offshore Wind Farms - A Planar Multi-Facility Location-Routing Problem

    OpenAIRE

    Amland, Thomas

    2014-01-01

    In offshore wind farms, two important parts of the design are to determine locations for substations and a cabling layout that connects every turbine to a substation. These problems are interconnected, as the cable layout depends on the choice of location for the substation. In this thesis we investigate how to set the location of substations such that the total cable cost is minimized.

  12. Asbestos Exposure Assessment Database

    Science.gov (United States)

    Arcot, Divya K.

    2010-01-01

    Exposure to particular hazardous materials in a work environment is dangerous to the employees who work directly with or around the materials as well as those who come in contact with them indirectly. In order to maintain a national standard for safe working environments and protect worker health, the Occupational Safety and Health Administration (OSHA) has set forth numerous precautionary regulations. NASA has been proactive in adhering to these regulations by implementing standards which are often stricter than regulation limits and administering frequent health risk assessments. The primary objective of this project is to create the infrastructure for an Asbestos Exposure Assessment Database specific to NASA Johnson Space Center (JSC) which will compile all of the exposure assessment data into a well-organized, navigable format. The data includes Sample Types, Samples Durations, Crafts of those from whom samples were collected, Job Performance Requirements (JPR) numbers, Phased Contrast Microscopy (PCM) and Transmission Electron Microscopy (TEM) results and qualifiers, Personal Protective Equipment (PPE), and names of industrial hygienists who performed the monitoring. This database will allow NASA to provide OSHA with specific information demonstrating that JSC s work procedures are protective enough to minimize the risk of future disease from the exposures. The data has been collected by the NASA contractors Computer Sciences Corporation (CSC) and Wyle Laboratories. The personal exposure samples were collected from devices worn by laborers working at JSC and by building occupants located in asbestos-containing buildings.

  13. A simulation based research on chance constrained programming in robust facility location problem

    Directory of Open Access Journals (Sweden)

    Kaijun Leng

    2017-03-01

    Full Text Available Since facility location decisions problem include long-term character and potential parameter variations, it is important to consider uncertainty in its modeling. This paper examines robust facility location problem considering supply uncertainty, in which we assume the supply of the facility in the actual operation is not equal to the supply initially established, the supply is subject to random fluctuation. The chance constraints are introduced when formulating the robust facility location model to make sure the system operate properly with a certain probability while the supply fluctuates. The chance constraints are approximated safely by using Hoeffding’s inequality and the problem is transformed to a general deterministic linear programming. Furthermore, how the facility location cost change with confidence level is investigated through a numerical example. The sensitivity analysis is conducted for important parameters of the model and we get the main factors that affect the facility location cost.

  14. Approximation algorithms for facility location problems with a special class of subadditive cost functions

    NARCIS (Netherlands)

    Gabor, Adriana F.; van Ommeren, Jan C.W.

    2006-01-01

    In this article we focus on approximation algorithms for facility location problems with subadditive costs. As examples of such problems, we present three facility location problems with stochastic demand and exponential servers, respectively inventory. We present a $(1+\\varepsilon, 1)$-reduction of

  15. Approximation algorithms for facility location problems with discrete subadditive cost functions

    NARCIS (Netherlands)

    Gabor, A.F.; van Ommeren, Jan C.W.

    2005-01-01

    In this article we focus on approximation algorithms for facility location problems with subadditive costs. As examples of such problems, we present two facility location problems with stochastic demand and exponential servers, respectively inventory. We present a $(1+\\epsilon,1)$- reduction of the

  16. 7 CFR 1735.13 - Location of facilities and service for nonrural subscribers.

    Science.gov (United States)

    2010-01-01

    ...-TELECOMMUNICATIONS PROGRAM Loan Purposes and Basic Policies § 1735.13 Location of facilities and service for nonrural... times be necessary to provide loan funds to finance telephone facilities which (1) will also serve nonrural subscribers, or (2) are located in nonrural areas. Loans may be approved to finance such...

  17. Eradicating asbestos one click at a time

    International Nuclear Information System (INIS)

    Ong, Jacqueline

    2014-01-01

    director Darren Anderson said Octfolio could play a pivotal role in helping the government with its national plan and would make it easier to comply with legislation covering asbestos and to use asbestos-related databases such as the National Asbestos Register. “This technology offers everything from online training for asbestos assessors and removalists, and sharing medical research information to encouraging safe storage and disposal, and licensed facilities and even mechanisms for reporting illegal disposal sites,” Anderson said. It's tipped to save building owners and managers significant time and resources by eliminating the need to undertake costly annual reviews of asbestos registers and lengthy asbestos inspection programs. The software has already been rolled out at Queensland's Ergon Energy, which uses it to manage its entries in the National Asbestos Register. The other newcomer, Start Software's Alpha Tracker, has only just landed on our shores, but it has had a proven track record in the UK. The automated asbestos surveying system has captured more than 15 million items of data on tablets and smartphones over the last decade. Alpha Tracker automates the whole surveying process, from issuing quotations, recording survey data and photos onsite, entering lab results and finally producing asbestos reports. All aspects of the system are available securely over the web using technology proven in over 100,000 asbestos surveys. In Australia, Alpha Tracker utilises Perth-based Creativity Corp's Mobile Data Studio, which allows surveyors to use the system on popular handheld devices including iPads, iPhones, Android tablets and smartphones. Start Software director Robin Bennett said: “Our link with Creativity Corp will be vital to our success in Australia. UK surveyors moving to Australia often ask if they can use Tracker technology here now they can and the time savings for even one surveyor are incredible. They never have to write up another report by hand, it

  18. Environmental Control Plan for the Industrial Hygiene Field Services Facility

    International Nuclear Information System (INIS)

    Donnelly, J.W.

    2000-01-01

    This environmental control plan is for the Hanford Site's Industrial Hygiene Field Services Facility, located in the 100-N Area. This facility is used for the maintenance and storage of respirators, respiratory equipment and testing, calibration and testing of industrial hygiene equipment, and asbestos fiber counting

  19. A heuristic approach to handle capacitated facility location problem evaluated using clustering internal evaluation

    Science.gov (United States)

    Sutanto, G. R.; Kim, S.; Kim, D.; Sutanto, H.

    2018-03-01

    One of the problems in dealing with capacitated facility location problem (CFLP) is occurred because of the difference between the capacity numbers of facilities and the number of customers that needs to be served. A facility with small capacity may result in uncovered customers. These customers need to be re-allocated to another facility that still has available capacity. Therefore, an approach is proposed to handle CFLP by using k-means clustering algorithm to handle customers’ allocation. And then, if customers’ re-allocation is needed, is decided by the overall average distance between customers and the facilities. This new approach is benchmarked to the existing approach by Liao and Guo which also use k-means clustering algorithm as a base idea to decide the facilities location and customers’ allocation. Both of these approaches are benchmarked by using three clustering evaluation methods with connectedness, compactness, and separations factors.

  20. Library Facility Siting and Location Handbook. The Greenwood Library Management Collection.

    Science.gov (United States)

    Koontz, Christine M.

    This handbook is a guide to the complex process of library facility siting and location. It includes relevant research and professionals' siting experiences, as well as actual case studies of closures, openings, mergers, and relocations of library facilities. While the bulk of the volume provides practical information, the work also presents an…

  1. Global Asbestos Disaster

    Directory of Open Access Journals (Sweden)

    Sugio Furuya

    2018-05-01

    Full Text Available Introduction: Asbestos has been used for thousands of years but only at a large industrial scale for about 100–150 years. The first identified disease was asbestosis, a type of incurable pneumoconiosis caused by asbestos dust and fibres. The latest estimate of global number of asbestosis deaths from the Global Burden of Disease estimate 2016 is 3495. Asbestos-caused cancer was identified in the late 1930’s but despite today’s overwhelming evidence of the strong carcinogenicity of all asbestos types, including chrysotile, it is still widely used globally. Various estimates have been made over time including those of World Health Organization and International Labour Organization: 107,000–112,000 deaths. Present estimates are much higher. Objective: This article summarizes the special edition of this Journal related to asbestos and key aspects of the past and present of the asbestos problem globally. The objective is to collect and provide the latest evidence of the magnitude of asbestos-related diseases and to provide the present best data for revitalizing the International Labor Organization/World Health Organization Joint Program on Asbestos-related Diseases. Methods: Documentation on asbestos-related diseases, their recognition, reporting, compensation and prevention efforts were examined, in particular from the regulatory and prevention point of view. Estimated global numbers of incidence and mortality of asbestos-related diseases were examined. Results: Asbestos causes an estimated 255,000 deaths (243,223–260,029 annually according to latest knowledge, of which work-related exposures are responsible for 233,000 deaths (222,322–242,802. In the European Union, United States of America and in other high income economies (World Health Organization regional classification the direct costs for sickness, early retirement and death, including production losses, have been estimated to be very high; in the Western European countries and

  2. 29 CFR 1915.1001 - Asbestos.

    Science.gov (United States)

    2010-07-01

    ..., disposal, storage, containment of and housekeeping activities involving asbestos or products containing... I, II, and III activities. Clean room means an uncontaminated room having facilities for the storage... system designed to capture the dust cloud created by the compressed air. (iii) Dry sweeping, shoveling or...

  3. A Hybrid Tabu Search Heuristic for a Bilevel Competitive Facility Location Model

    Science.gov (United States)

    Küçükaydın, Hande; Aras, Necati; Altınel, I. Kuban

    We consider a problem in which a firm or franchise enters a market by locating new facilities where there are existing facilities belonging to a competitor. The firm aims at finding the location and attractiveness of each facility to be opened so as to maximize its profit. The competitor, on the other hand, can react by adjusting the attractiveness of its existing facilities, opening new facilities and/or closing existing ones with the objective of maximizing its own profit. The demand is assumed to be aggregated at certain points in the plane and the facilities of the firm can be located at prespecified candidate sites. We employ Huff's gravity-based rule in modeling the behavior of the customers where the fraction of customers at a demand point that visit a certain facility is proportional to the facility attractiveness and inversely proportional to the distance between the facility site and demand point. We formulate a bilevel mixed-integer nonlinear programming model where the firm entering the market is the leader and the competitor is the follower. In order to find a feasible solution of this model, we develop a hybrid tabu search heuristic which makes use of two exact methods as subroutines: a gradient ascent method and a branch-and-bound algorithm with nonlinear programming relaxation.

  4. New spatial clustering-based models for optimal urban facility location considering geographical obstacles

    Science.gov (United States)

    Javadi, Maryam; Shahrabi, Jamal

    2014-03-01

    The problems of facility location and the allocation of demand points to facilities are crucial research issues in spatial data analysis and urban planning. It is very important for an organization or governments to best locate its resources and facilities and efficiently manage resources to ensure that all demand points are covered and all the needs are met. Most of the recent studies, which focused on solving facility location problems by performing spatial clustering, have used the Euclidean distance between two points as the dissimilarity function. Natural obstacles, such as mountains and rivers, can have drastic impacts on the distance that needs to be traveled between two geographical locations. While calculating the distance between various supply chain entities (including facilities and demand points), it is necessary to take such obstacles into account to obtain better and more realistic results regarding location-allocation. In this article, new models were presented for location of urban facilities while considering geographical obstacles at the same time. In these models, three new distance functions were proposed. The first function was based on the analysis of shortest path in linear network, which was called SPD function. The other two functions, namely PD and P2D, were based on the algorithms that deal with robot geometry and route-based robot navigation in the presence of obstacles. The models were implemented in ArcGIS Desktop 9.2 software using the visual basic programming language. These models were evaluated using synthetic and real data sets. The overall performance was evaluated based on the sum of distance from demand points to their corresponding facilities. Because of the distance between the demand points and facilities becoming more realistic in the proposed functions, results indicated desired quality of the proposed models in terms of quality of allocating points to centers and logistic cost. Obtained results show promising

  5. Three formulations of the multi-type capacitated facility location problem

    DEFF Research Database (Denmark)

    Klose, Andreas

    The "multi-type" or "modular" capacitated facility location problem is a discrete location model that addresses non-convex piecewise linear production costs as, for instance, staircase cost functions. The literature basically distinguishes three different ways to formulate non-convex piecewise...

  6. Huff-type competitive facility location model with foresight in a discrete space

    Directory of Open Access Journals (Sweden)

    Milad Gorji Ashtiani

    2011-01-01

    Full Text Available Consider a chain as leader that wants to open p new facilities in a linear market, like metro. In this market, there is a competitor, called follower. The leader and the follower have established some facilities in advance. When the leader opens p new facilities, its competitor, follower, reacts the leader’s action and opens r new facilities. The optimal locations for leader and follower are chosen among predefined potential locations. Demand is considered as demand points and is assumed inelastic. Considering huff model, demand points are probabilistically absorbed by all facilities. The leader’s objective is maximization of its market share after opening follower’s new facilities. For solving leader problem, first the follower’s problem is solved for all leader’s potential locations and the best location for leader is obtained and then, a heuristic model is proposed for leader problem when the leader and the follower want to open one new facility. Computational results show that the proposed method is efficient for large scale problems.

  7. A hybrid algorithm for stochastic single-source capacitated facility location problem with service level requirements

    Directory of Open Access Journals (Sweden)

    Hosseinali Salemi

    2016-04-01

    Full Text Available Facility location models are observed in many diverse areas such as communication networks, transportation, and distribution systems planning. They play significant role in supply chain and operations management and are one of the main well-known topics in strategic agenda of contemporary manufacturing and service companies accompanied by long-lasting effects. We define a new approach for solving stochastic single source capacitated facility location problem (SSSCFLP. Customers with stochastic demand are assigned to set of capacitated facilities that are selected to serve them. It is demonstrated that problem can be transformed to deterministic Single Source Capacitated Facility Location Problem (SSCFLP for Poisson demand distribution. A hybrid algorithm which combines Lagrangian heuristic with adjusted mixture of Ant colony and Genetic optimization is proposed to find lower and upper bounds for this problem. Computational results of various instances with distinct properties indicate that proposed solving approach is efficient.

  8. Planning of public healthcare facility using a location allocation modelling: A case study

    Science.gov (United States)

    Shariff, S. Sarifah Radiah; Moin, Noor Hasnah; Omar, Mohd

    2014-09-01

    Finding the correct location of any facility and determining the demands which are to be assigned to it is very crucial in public health service. This is to ensure that the public gain maximum benefits. This article analyzes the previous location decisions of public primary healthcare (PHC) facilities in the district of Kuala Langat, Malaysia. With total population of 220214 (in 2010), the PHC in the district is currently served by 28 facilities. The percentages of total population covered (in 2007) within the maximum allowable distance of 3km and 5km are 69.7 percent and 77.8 percent respectively. This is very low compared to the Malaysian National Health Policy of Health for All or 100 percent coverage. The determination of health facility location should be planned carefully to further increase effective primary health service to the nation that is required for economic sustainability.

  9. The adequacy of the facility and the location of waste collection

    Science.gov (United States)

    Ulrich-Supovec, Marjana

    2017-07-01

    The purpose of this article is to summarise some provisions of the legislation applicable in the territory of the Republic of Slovenia that have to be complied with when selecting facilities intended for waste collection. In addition to equipment, the adequacy of such facility also depends on its site. Not only waste management legislation and environment protection legislation, but also legislation governing water, nature preservation and conservation, natural and cultural heritage and mining legislation stipulate the possibility of using facilities where collectors can sort and store waste before depositing it for subsequent management. This paper presents location examples where various factors exclude the possibility of using facilities as waste collection centres.

  10. Environmental health survey in asbestos cement sheets manufacturing industry.

    Science.gov (United States)

    Ansari, F A; Bihari, V; Rastogi, S K; Ashquin, M; Ahmad, I

    2007-01-01

    About 673 small-scale asbestos mining and milling facilities and 33 large - scale asbestos manufacturing plants, (17 asbestos-cement product manufacturing plants and 16 other than asbestos-cement product plants) are situated in India. The present study reveals the exposure of commercial asbestos (chrysotile) in the occupational as well as ambient air environment of the asbestos-cement (AC) sheets industry using membrane filter method of Bureau of Indian Standards (BIS). The fibre concentrations in 15 samples collected in the occupational environment at ingredient feeding site, sheet-producing site, fibre godown were 0.079, 0.057 and 0.078 f/cc, respectively and in five samples from surrounding ambient air at factory gate resulted fibre concentration of 0.071 f/cc. All the samples have shown fibre concentration lower than the threshold limit values (TLVs) prescribed by BIS. Morphological analysis of samples, further under phase contrast and polarized microscopy indicates the presence of chrysotile asbestos, which acts as carcinogen as well as co-carcinogen. A clinical examination of exposed subjects reveals that there was no case of clubbing, crepitation, ronchi and dyspnea on exertion; however, obstruction and restriction were 10.9 per cent and 25 per cent in exposed subjects, respectively while in control there were 12 per cent and 28 per cent, respectively. The study revealed that chrysotile asbestos is emitted in the occupational as well as ambient environment that may cause adverse health impact.

  11. Study of a Country Level Facility LocationSelection for a Small Company

    OpenAIRE

    Eterovic, Mirko; Özgül, Simge

    2012-01-01

    Selection of an optimal facility location is a challenging decision for companies, since it would be costly and dicult to change the location after an installation has been already made. Existing numerical methods in the decision-making process help companies to perform their operations with minimum cost and maximum value based on their strategic objectives. Decision making process requires the selection of relative processes among several alternatives corresponding to a set of location facto...

  12. Allegheny County Asbestos Permits

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Current asbestos permit data issued by the County for commercial building demolitions and renovations as required by the EPA. This file is updated daily and can be...

  13. Asbestos and its diseases

    National Research Council Canada - National Science Library

    Gibbs, A. R; Craighead, John E

    2008-01-01

    ... Chapter 8. Malignant Diseases of the Pleura, Peritoneum, and Other Serosal Surfaces Allen R. Gibbs and John E. Craighead 190 Chapter 9. Nonthoracic Cancers Possibly Resulting from Asbestos Exposu...

  14. Making regional facility location decisions: the example of Hospital do Oeste Norte, Portugal

    Directory of Open Access Journals (Sweden)

    Jorge Gonçalves

    2014-11-01

    Full Text Available This paper seeks to contribute to the debate on the decision-making process for the location of large public facilities, responding to the growing demand for greater rationality in public investment whilst still offering services of quality and addressing the problem of spatial friction. The specific problem analysed in this paper is the need to define the best location for a public hospital in a particular region of Portugal. The singularity of the approach adopted lies above all in the seg- mentation into macro-location and micro-location.

  15. A minisum model with forbidden regions for locating a semi-desirable facility in the plane

    DEFF Research Database (Denmark)

    Juel, Henrik; Brimberg, Jack

    1998-01-01

    -desirable facility that accounts for the service costs by a standard minisum objective with arbitrary travel distance function. The social costs are imputed by specifying around each demand point or population center a convex forbidden region, also defined by an arbitrary distance metric, in which the new facility...... may not be located. A general solution algorithm is suggested, and the methodology is applied to circular forbidden regions and special travel distance functions....

  16. A minisum model with forbidden regions for locating a semi-desirable facility in the plane

    DEFF Research Database (Denmark)

    Brimberg, Jack; Juel, Henrik

    -desirable facility which accounts for the service costs by a standard minisum objective with arbitrary travel distance function. The social costs are imputed by specifying around each demand point or population center a convex forbidden region, also defined by an arbitrary distance metric, in which the new facility...... may not be located. A general solution algorithm is suggested, and the methodology applied to circular forbidden regions and special travel distance functions....

  17. Asbestos exposures of mechanics performing clutch service on motor vehicles.

    Science.gov (United States)

    Cohen, Howard J; Van Orden, Drew R

    2008-03-01

    A study was conducted to assess historical asbestos exposures of mechanics performing clutch service on motor vehicles. For most of the 20th century, friction components used in brakes and manual transmission clutches contained approximately 25-60% chrysotile asbestos. Since the late 1960s, asbestos exposure assessment studies conducted on mechanics performing brake service have frequently reported levels below the current OSHA permissible exposure limit (PEL) of 0.1 fiber/cc (flcc). Although there is a robust asbestos exposure data set for mechanics performing brake service, there are almost no data for mechanics removing and replacing clutches in manual transmission vehicles. Personal and area airborne asbestos samples were collected during the removal of asbestos-containing clutches from 15 manual transmissions obtained from salvage facilities by an experienced mechanic. Clutch plates and debris were analyzed for asbestos using EPA and ISO published analytical methods. More than 100 personal and area air samples were collected and analyzed for asbestos fibers using NIOSH methods 7400 and 7402. A separate study involved a telephone survey of 16 automotive mechanics who began work prior to 1975. The mechanics were asked about the duration, frequency, and methods used to perform clutch service. Wear debris in the bell housing surrounding clutches had an average of 0.1% chrysotile asbestos by weight, a value consistent with similar reports of brake debris. Asbestos air sampling data collected averaged 0.047 flcc. Mechanics participating in the telephone survey indicated that clutch service was performed infrequently, the entire clutch assembly was normally replaced, and there was no need to otherwise handle the asbestos-containing clutch plates. These mechanics also confirmed that wet methods were most frequently used to clean debris from the bell housing. Combining the asbestos exposure that occurred when mechanics performed clutch service, along with the duration

  18. Cuckoo search via Levy flights applied to uncapacitated facility location problem

    Science.gov (United States)

    Mesa, Armacheska; Castromayor, Kris; Garillos-Manliguez, Cinmayii; Calag, Vicente

    2017-11-01

    Facility location problem (FLP) is a mathematical way to optimally locate facilities within a set of candidates to satisfy the requirements of a given set of clients. This study addressed the uncapacitated FLP as it assures that the capacity of every selected facility is finite. Thus, even if the demand is not known, which often is the case, in reality, organizations may still be able to take strategic decisions such as locating the facilities. There are different approaches relevant to the uncapacitated FLP. Here, the cuckoo search via Lévy flight (CS-LF) was used to solve the problem. Though hybrid methods produce better results, this study employed CS-LF to determine first its potential in finding solutions for the problem, particularly when applied to a real-world problem. The method was applied to the data set obtained from a department store in Davao City, Philippines. Results showed that applying CS-LF yielded better facility locations compared to particle swarm optimization and other existing algorithms. Although these results showed that CS-LF is a promising method to solve this particular problem, further studies on other FLP are recommended to establish a strong foundation of the capability of CS-LF in solving FLP.

  19. Incident factors in facility location: An application in the Colombian biofuel sector

    Directory of Open Access Journals (Sweden)

    Alexandra Eugenia Duarte

    2013-09-01

    Full Text Available Facility location concerns high impact strategic decision-making in supply chain design. One of the most important issues regarding such decision is a suitable selection of incident factors due to their effects on costs and customer service level. This paper was thus aimed at presenting a methodology for defining and hierarchising a group of factors which affect decision-making concerning facility location. The methodology was based on expert methods, incorporating a goal programming application extended to support weighting. Colombian biofuels sector results are presented.

  20. An Approximation Algorithm for the Facility Location Problem with Lexicographic Minimax Objective

    Directory of Open Access Journals (Sweden)

    Ľuboš Buzna

    2014-01-01

    Full Text Available We present a new approximation algorithm to the discrete facility location problem providing solutions that are close to the lexicographic minimax optimum. The lexicographic minimax optimum is a concept that allows to find equitable location of facilities serving a large number of customers. The algorithm is independent of general purpose solvers and instead uses algorithms originally designed to solve the p-median problem. By numerical experiments, we demonstrate that our algorithm allows increasing the size of solvable problems and provides high-quality solutions. The algorithm found an optimal solution for all tested instances where we could compare the results with the exact algorithm.

  1. An improved Lagrangian relaxation and dual ascent approach to facility location problems

    DEFF Research Database (Denmark)

    Jörnsten, Kurt; Klose, Andreas

    2016-01-01

    not be reduced to the same extent as in the case of ordinary semi-Lagrangian relaxation. Hence, an effective method for optimizing the Lagrangian dual function is of utmost importance for obtaining a computational advantage from the simplified Lagrangian dual function. In this paper, we suggest a new dual ascent...... method for optimizing both the semi-Lagrangian dual function as well as its simplified form for the case of a generic discrete facility location problem and apply the method to the uncapacitated facility location problem. Our computational results show that the method generally only requires a very few...

  2. A Game Theoretical Model for Location of Terror Response Facilities under Capacitated Resources

    Directory of Open Access Journals (Sweden)

    Lingpeng Meng

    2013-01-01

    Full Text Available This paper is concerned with the effect of capacity constraints on the locations of terror response facilities. We assume that the state has limited resources, and multiple facilities may be involved in the response until the demand is satisfied consequently. We formulate a leader-follower game model between the state and the terrorist and prove the existence and uniqueness of the Nash equilibrium. An integer linear programming is proposed to obtain the equilibrium results when the facility number is fixed. The problem is demonstrated by a case study of the 19 districts of Shanghai, China.

  3. On (Group) Strategy-Proof Mechanisms without Payment for Facility Location Games

    DEFF Research Database (Denmark)

    Thang, Nguyen Kim

    2010-01-01

    in an allowable location that minimizes the utilitarian social cost — the sum of agents costs. A mechanism is strategyproof (SP) if no agent may misreport its locations and be better off; it is group-strategyproof (GSP) if no coalition of agents benefits by jointly misreporting their locations The requirement...... for (G)SP in this setting makes optimum placement of the facility impossible and, therefore, we consider approximation (G)SP mechanisms. For SP mechanisms, we give a simple 3-approximation randomized mechanism and also provide asymptotic lower bounds for different variants. For GSP mechanisms, a (2N + 1......We characterize the performance of strategyproof and group-strategyproof social choice rules, for placing a facility on the nodes of a metric network inhabited by N autonomous self-interested agents. Every agent owns a set of locations and caters to minimization of its cost which is the total...

  4. Decision support with respect to facility location and fleet composition for FoodBank Cape Town

    CSIR Research Space (South Africa)

    Lanz, EJ

    2011-09-01

    Full Text Available Fleet Composition Current & Future Work FoodBank Cape Town First in South Africa Launched on 2 March 2009 Warehouse located in Philippi East [1] Majority of food sourced from DCs and retail sector Distributing to approximately 200 agencies... & Future Work Figure: Sourcing & distributing ow diagram EJ Lanz 40th Annual ORSSA Conference 11 of 36 Background Project Focus Demand & Candidate Sites Facility Location Problems Vehicle Fleet Composition Current & Future Work Data Demand Site...

  5. Locations and attributes of utility-scale solar power facilities in Colorado and New Mexico, 2011

    Science.gov (United States)

    Ignizio, Drew A.; Carr, Natasha B.

    2012-01-01

    The data series consists of polygonal boundaries for utility-scale solar power facilities (both photovoltaic and concentrating solar power) located within Colorado and New Mexico as of December 2011. Attributes captured for each facility include the following: facility name, size/production capacity (in MW), type of solar technology employed, location, state, operational status, year the facility came online, and source identification information. Facility locations and perimeters were derived from 1-meter true-color aerial photographs (2011) produced by the National Agriculture Imagery Program (NAIP); the photographs have a positional accuracy of about ±5 meters (accessed from the NAIP GIS service: http://gis.apfo.usda.gov/arcgis/services). Solar facility perimeters represent the full extent of each solar facility site, unless otherwise noted. When visible, linear features such as fences or road lines were used to delineate the full extent of the solar facility. All related equipment including buildings, power substations, and other associated infrastructure were included within the solar facility. If solar infrastructure was indistinguishable from adjacent infrastructure, or if solar panels were installed on existing building tops, only the solar collecting equipment was digitized. The "Polygon" field indicates whether the "equipment footprint" or the full "site outline" was digitized. The spatial accuracy of features that represent site perimeters or an equipment footprint is estimated at +/- 10 meters. Facilities under construction or not fully visible in the NAIP imagery at the time of digitization (December 2011) are represented by an approximate site outline based on the best available information and documenting materials. The spatial accuracy of these facilities cannot be estimated without more up-to-date imagery – users are advised to consult more recent imagery as it becomes available. The "Status" field provides information about the operational

  6. Location Optimization of Urban Mining Facilities with Maximal Covering Model in GIS: A Case of China

    NARCIS (Netherlands)

    Xue, Yanyan; Wen, Zongguo; Ji, Xiaoli; Bressers, Johannes T.A.; Zhang, Chenkai

    Urban mining offers an efficient supply of resources because of rich mines and low environmental impacts. Location selection and optimization for urban mining facilities is more complicated than for natural mines, given that it may vary according to the urban population, consumption habits, and

  7. The approximation gap for the metric facility location problem is not yet closed

    NARCIS (Netherlands)

    Byrka, J.; Aardal, K.I.

    2007-01-01

    We consider the 1.52-approximation algorithm of Mahdian et al. for the metric uncapacitated facility location problem. We show that their algorithm does not close the gap with the lower bound on approximability, 1.463, by providing a construction of instances for which its approximation ratio is not

  8. A simultaneous facility location and vehicle routing problem arising in health care logistics in the Netherlands

    NARCIS (Netherlands)

    Veenstra, Marjolein; Roodbergen, Kees Jan; Coelho, Leandro C.; Zhu, Stuart X.

    2018-01-01

    This paper introduces a simultaneous facility location and vehicle routing problem that arises in health care logistics in the Netherlands. In this problem, the delivery of medication from a local pharmacy can occur via lockers, from where patients that are within the coverage distance of a locker

  9. Facility Location Modeling in Multi-Echelon Distribution System: A Case Study of Indonesian Liquefied Petroleum Gas Supply Chain

    Directory of Open Access Journals (Sweden)

    Ilyas Masudin

    2013-04-01

    Full Text Available This paper presents model of Indonesian LPG supply chain by opening new facilities (new echelon taking into account the current facilities. The objective is to investigate the relation between distribution costs such as transportation, inventory cost and facility location in Indonesian multi-echelon LPG supply chain. Fixed-charged capacitated facility location problem is used to determine the optimal solution of the proposed model. In the sensitivity analysis, it is reported that the trade-offs between facility locations and distribution costs are exist. Results report that as the number of facility increases, total transportation and inventory cost also increase.

  10. Asbestos exposure and Alzheimer disease

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, C; Bittesini, L; Brollo, A

    1986-02-01

    10 cases in which an asbestos-related disease (malignant pleural mesothelioma or asbestosis) was associated with severe Alzheimer type lesions in the brain are reported. The patients, all males aged between 67 and 78 years, had been occupationally exposed to asbestos in the shipbuilding industry. The hypothesis that asbestos is a favoring factor in the genesis of Alzheimer disease is discussed.

  11. Environmental Control Plan for the Industrial Hygiene Field Services Facility; TOPICAL

    International Nuclear Information System (INIS)

    J. W. Donnelly

    2001-01-01

    This environmental control plan is for the Hanford Site's industrial hygiene field services facility, located in the 100-N Area. The facility is used for the maintenance and storage of respirators, respiratory equipment and testing, calibration and testing of industrial hygiene equipment, and asbestos fiber counting

  12. 18 CFR 292.208 - Special requirements for hydroelectric small power production facilities located at a new dam or...

    Science.gov (United States)

    2010-04-01

    ... for hydroelectric small power production facilities located at a new dam or diversion. 292.208 Section... requirements for hydroelectric small power production facilities located at a new dam or diversion. (a) A hydroelectric small power production facility that impounds or diverts the water of a natural watercourse by...

  13. The adequacy of the facility and the location of waste collection

    Directory of Open Access Journals (Sweden)

    Ulrich-Supovec Marjana

    2017-07-01

    Full Text Available The purpose of this article is to summarise some provisions of the legislation applicable in the territory of the Republic of Slovenia that have to be complied with when selecting facilities intended for waste collection. In addition to equipment, the adequacy of such facility also depends on its site. Not only waste management legislation and environment protection legislation, but also legislation governing water, nature preservation and conservation, natural and cultural heritage and mining legislation stipulate the possibility of using facilities where collectors can sort and store waste before depositing it for subsequent management. This paper presents location examples where various factors exclude the possibility of using facilities as waste collection centres.

  14. On locating a semi-desirable facility on the continuous plane

    DEFF Research Database (Denmark)

    Brimberg, Jack; Juel, Henrik

    1998-01-01

    Euclidean distance from the facility to the closest customer. The objective is to generate the set of efficient points, from which the decision maker must choose the preferred one. Two reformulations are considered: in one, the sum of weighted distances is minimized, subject to constraints requiring...... that each customer must have a weighted Euclidean distance to the facility of at least a given parameter; varying the parameter yields the efficient set. In the other, both criteria are viewed as minimization problems and a convex combination of them is minimized. Properties of the reformulations are given......The paper considers a bicriteria model for locating a semi-desirable facility on the plane. One criterion is that of minimizing the sum of weighted distances between customers and facility, where distances are given by an arbitrary norm. The other criterion is that of maximizing the weighted...

  15. Assessment of airborne asbestos exposure during the servicing and handling of automobile asbestos-containing gaskets.

    Science.gov (United States)

    Blake, Charles L; Dotson, G Scott; Harbison, Raymond D

    2006-07-01

    Five test sessions were conducted to assess asbestos exposure during the removal or installation of asbestos-containing gaskets on vehicles. All testing took place within an operative automotive repair facility involving passenger cars and a pickup truck ranging in vintage from late 1960s through 1970s. A professional mechanic performed all shop work including engine disassembly and reassembly, gasket manipulation and parts cleaning. Bulk sample analysis of removed gaskets through polarized light microscopy (PLM) revealed asbestos fiber concentrations ranging between 0 and 75%. Personal and area air samples were collected and analyzed using National Institute of Occupational Safety Health (NIOSH) methods 7400 [phase contrast microscopy (PCM)] and 7402 [transmission electron microscopy (TEM)]. Among all air samples collected, approximately 21% (n = 11) contained chrysotile fibers. The mean PCM and phase contrast microscopy equivalent (PCME) 8-h time weighted average (TWA) concentrations for these samples were 0.0031 fibers/cubic centimeters (f/cc) and 0.0017 f/cc, respectively. Based on these findings, automobile mechanics who worked with asbestos-containing gaskets may have been exposed to concentrations of airborne asbestos concentrations approximately 100 times lower than the current Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) of 0.1 f/cc.

  16. An Integrated Approach for Reliable Facility Location/Network Design Problem with Link Disruption

    Directory of Open Access Journals (Sweden)

    Davood Shishebori

    2015-05-01

    Full Text Available Proposing a robust designed facility location is one of the most effective ways to hedge against unexpected disruptions and failures in a transportation network system. This paper considers the combined facility location/network design problem with regard to transportation link disruptions and develops a mixed integer linear programming formulation to model it. With respect to the probability of link disruptions, the objective function of the model minimizes the total costs, including location costs, link construction costs and also the expected transportation costs. An efficient hybrid algorithm based on LP relaxation and variable neighbourhood search metaheuristic is developed in order to solve the mathematical model. Numerical results demonstrate that the proposed hybrid algorithm has suitable efficiency in terms of duration of solution time and determining excellent solution quality.

  17. Impacts of facility size and location decisions on ethanol production cost

    International Nuclear Information System (INIS)

    Kocoloski, Matt; Michael Griffin, W.; Scott Matthews, H.

    2011-01-01

    Cellulosic ethanol has been identified as a promising alternative to fossil fuels to provide energy for the transportation sector. One of the obstacles cellulosic ethanol must overcome in order to contribute to transportation energy demand is the infrastructure required to produce and distribute the fuel. Given a nascent cellulosic ethanol industry, locating cellulosic ethanol refineries and creating the accompanying infrastructure is essentially a greenfield problem that may benefit greatly from quantitative analysis. This study models cellulosic ethanol infrastructure investment using a mixed integer program (MIP) that locates ethanol refineries and connects these refineries to the biomass supplies and ethanol demands in a way that minimizes the total cost. For the single- and multi-state regions examined in this study, larger facilities can decrease ethanol costs by $0.20-0.30 per gallon, and placing these facilities in locations that minimize feedstock and product transportation costs can decrease ethanol costs by up to $0.25 per gallon compared to uninformed placement that could result from influences such as local subsidies to encourage economic development. To best benefit society, policies should allow for incentives that encourage these low-cost production scenarios and avoid politically motivated siting of plants. - Research highlights: → Mixed-integer programming can be used to model ethanol infrastructure investment. → Large cellulosic ethanol facilities can decrease production cost by $0.20/gallon. → Optimized facility placement can save $0.25/gallon.

  18. [Effectiveness of support for asbestos health consultation in health centers].

    Science.gov (United States)

    Nagamatsu, Yasuko

    2011-09-01

    In this research, we aimed to evaluate the support for asbestos health consultation in health centers. In this exploratory descriptive study, a self-administered original questionnaire was developed and used. Among all 517 health centers, valid responses were returned from 323 (62.5%) consenting centers. Consultations in the previous year ranged from 0-108 cases, with a facility median of 3.0 cases. Among staff members, 86.4% did not receive training and 35.4% had never used the manual. Workplaces that use asbestos within their jurisdiction were recognized by 39.2% of staff members, and 16.7% of these members always supported consultants psychologically. The staff members were not confident about asbestos health consultation: 71.2% for general questions, 76.2% for questions about asbestos-related diseases, and 76.4% for questions about risk of asbestos-related diseases; 51.4% were not confident about the Asbestos-Related Health Damage Relief System. Health center staff members who were significantly more confident were those who had more staff to work with; dealt with many consultations in the previous year; recognized the workplaces using asbestos within their jurisdiction; often used the manual and often psychologically supported consultants. According to the covariance structure analysis model, the 'use of support systems' consisting of 'the use of manual', 'training attendance' and 'recognition of workplaces that use asbestos' positively affected the frequency of psychological support (peffective in building the confidence of health center staff in relation to asbestos health consultation, although the use of these support systems was low.

  19. A Simulated Annealing Approach for the Composite Facility Location and Resource Allocation Problem: A Study of Strategic Positioning of US Air Force Munitions

    National Research Council Canada - National Science Library

    Bell, John

    2003-01-01

    .... This model is a combination facility location model and inventory allocation model which is aimed at simultaneously determining where to locate facilities and how to position inventory quantities...

  20. An assessment of air sampling location for stack monitoring in nuclear facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Bok [University of Science and Technology, Daejeon (Korea, Republic of); Kim, Tae Hyoung; Lee, Jong Il; Kim, Bong Hwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2017-06-15

    In this study, air sampling locations in the stack of the Advanced Fuel Science Building (AFSB) at the Korea Atomic Energy Research Institute (KAERI) were assessed according to the ANSI/HPS N13.1-1999 specification. The velocity profile, flow angle and 10 μm aerosol particle profile at the cross-section as functions of stack height L and stack diameter D (L/D) were assessed according to the sampling location criteria using COMSOL. The criteria for the velocity profile were found to be met at 5 L/D or more for the height, and the criteria for the average flow angle were met at all locations through this assessment. The criteria for the particle profile were met at 5 L/D and 9 L/D. However, the particle profile at the cross-section of each sampling location was found to be non-uniform. In order to establish uniformity of the particle profile, a static mixer and a perimeter ring were modeled, after which the degrees of effectiveness of these components were compared. Modeling using the static mixer indicated that the sampling locations that met the criteria for the particle profile were 5-10 L/D. When modeling using the perimeter ring, the sampling locations that met the criteria for particle profile were 5 L/D and 7-10 L/D. The criteria for the velocity profile and the average flow angle were also met at the sampling locations that met the criteria for the particle profile. The methodologies used in this study can also be applied during assessments of air sampling locations when monitoring stacks at new nuclear facilities as well as existing nuclear facilities.

  1. Policies to deal with reactionary factors in the location of nuclear power facilities

    International Nuclear Information System (INIS)

    Lee, Yong Soo

    2000-01-01

    Energy is very important for daily life. But the prevailing fossil fuels are almost running out and moore over, the global warming caused by fossil fuel threatens all lives on the earth. Yet in reality, there are almost no choices to take the place fossil fuels beside nuclear energy. Nuclear energy is the only practical new energy resource that can be produced in Korea, which possesses nearly no energy resources and imports 98% do its energy supplies annually. Fortunately the rate of self-reliance of Korean nuclear technology is up to 95%, which is almost at top level in the world. However, many people think that nuclear energy is dangerous and uneconomical, thus social tension and dispute often a rises regarding nuclear energy, To minimize these discords, those in charge of the facility should provide an acceptable strategy to the publics, especially concerning the location of the facility. The strategy should include the followings: (1) The publics should participate in the planning stage of the nuclear facility, not only symbolically but also practically, and all information should be opened to publics so that cost-effectiveness and safety of the facility can be evaluated. (2) For the people who lose their land, home and work, an appropriate compensation should be considered from the planning stage. (3) The person in charge of the facility has to show that people in neighborhood of the facility enjoy better life than before and should help people to recognize it. (4) Continuous campaign enhancing public understanding of the need and safety for nuclear facility must be implemented. (5) South Korea's nuclear facilities could be set up in North Korea as the relationships between two Koreas improve. (author)

  2. A subgradient-based branch-and-bound algorithm for the capacitated facility location problem

    DEFF Research Database (Denmark)

    Görtz, Simon; Klose, Andreas

    This paper presents a simple branch-and-bound method based on Lagrangean relaxation and subgradient optimization for solving large instances of the capacitated facility location problem (CFLP) to optimality. In order to guess a primal solution to the Lagrangean dual, we average solutions to the L......This paper presents a simple branch-and-bound method based on Lagrangean relaxation and subgradient optimization for solving large instances of the capacitated facility location problem (CFLP) to optimality. In order to guess a primal solution to the Lagrangean dual, we average solutions...... to the Lagrangean subproblem. Branching decisions are then based on this estimated (fractional) primal solution. Extensive numerical results reveal that the method is much more faster and robust than other state-of-the-art methods for solving the CFLP exactly....

  3. Advantages of co-located spent fuel reprocessing, repository and underground reactor facilities

    International Nuclear Information System (INIS)

    Mahar, James M.; Kunze, Jay F.; Wes Myers, Carl; Loveland, Ryan

    2007-01-01

    The purpose of this work is to extend the discussion of potential advantages of the underground nuclear park (UNP) concept by making specific concept design and cost estimate comparisons for both present Generation III types of reactors and for some of the modular Gen IV or the GNEP modular concept. For the present Gen III types, we propose co-locating reprocessing and (re)fabrication facilities along with disposal facilities in the underground park. The goal is to determine the site costs and facility construction costs of such a complex which incorporates the advantages of a closed fuel cycle, nuclear waste repository, and ultimate decommissioning activities all within the UNP. Modular power generation units are also well-suited for placement underground and have the added advantage of construction using current and future tunnel boring machine technology. (authors)

  4. A simple but usually fast branch-and-bound algorithm for the capacitated facility location problem

    DEFF Research Database (Denmark)

    Görtz, Simon; Klose, Andreas

    2012-01-01

    This paper presents a simple branch-and-bound method based on Lagrangean relaxation and subgradient optimization for solving large instances of the capacitated facility location problem (CFLP) to optimality. To guess a primal solution to the Lagrangean dual, we average solutions to the Lagrangean...... subproblem. Branching decisions are then based on this estimated (fractional) primal solution. Extensive numerical results reveal that the method is much faster and more robust than other state-of-the-art methods for solving the CFLP exactly....

  5. Facility location decisions with environmental considerations. A case study from the petrochemical industry

    OpenAIRE

    Treitl, Stefan; Jammernegg, Werner

    2014-01-01

    The recently growing concerns of customers and governments about environmental protection and greenhouse gas reduction have forced companies to integrate the topic of environmental sustainability into their decision making. Facility location decisions are of special relevance in this respect because of their strategic nature. Furthermore, many different trade-offs must be considered, for example between operational costs and customer service. But as soon as environmental issues are concerned,...

  6. Management of Small Quantity of Nuclear Material at Locations Outside Facilities in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Park, Seung Sik; Kim, Ki Hyun [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    Small quantity of nuclear material (SQNM) is prescribed to be less than specified minimum quantities of nuclear material in a facility. SQNM is used at the locations called locations outside facilities (LOFs). LOFs are used to control the locations and installations that store nuclear materials under one effective Kg, respectively. Holders of SQNM don't need to require a license for use or possession of Uranium or Thorium exclusively for non-nuclear activities, or neither report them to the System of Accounting for and Control of nuclear material (SSAC) under specified quantities according to the Atomic Safety Law. Well defined safeguards law is fundamental to the effective control of nuclear material, facilities and nuclear related activities. In the current nuclear safety legislation, there are some exceptive clauses. Users of SQNM don't need to require a license for use or possession of Uranium or Thorium exclusively for non-nuclear activities, or not report them to the national authority below specified amount.

  7. Management of Small Quantity of Nuclear Material at Locations Outside Facilities in Korea

    International Nuclear Information System (INIS)

    Park, Seung Sik; Kim, Ki Hyun

    2016-01-01

    Small quantity of nuclear material (SQNM) is prescribed to be less than specified minimum quantities of nuclear material in a facility. SQNM is used at the locations called locations outside facilities (LOFs). LOFs are used to control the locations and installations that store nuclear materials under one effective Kg, respectively. Holders of SQNM don't need to require a license for use or possession of Uranium or Thorium exclusively for non-nuclear activities, or neither report them to the System of Accounting for and Control of nuclear material (SSAC) under specified quantities according to the Atomic Safety Law. Well defined safeguards law is fundamental to the effective control of nuclear material, facilities and nuclear related activities. In the current nuclear safety legislation, there are some exceptive clauses. Users of SQNM don't need to require a license for use or possession of Uranium or Thorium exclusively for non-nuclear activities, or not report them to the national authority below specified amount

  8. Siting locally-unwanted facilities: What can be learnt from the location of Italian power plants

    International Nuclear Information System (INIS)

    Garrone, Paola; Groppi, Angelamaria

    2012-01-01

    The reaction of communities to the development of energy facilities is based on the environmental impact of the investment, but it also reflects the ex-ante propensity of residents to engage in collective actions. In this work we have examined the requests of authorization of Italian power producers for new thermal plants with the purpose of testing the efficiency of market-based siting policies. The classical location factors, e.g., infrastructure availability, have been confirmed to play a role, and there is a weak evidence that authorization demands have targeted communities that suffer less environmental damage. However our findings have also revealed that power producers are likely to avoid potentially suitable sites if they host a highly activistic community. The paper also discusses some modifications concerning siting policies that could improve the alignment between community responses and the environmental costs of new energy facilities. - Highlights: ► We model location choices for polluting power plants by Italian producers in 1999–2006. ► The efficiency of market-based siting policies is tested (i.e., plants located where environmental damage is lower). ► More than environmental costs, voice factors prevailed on the location choices. ► We conclude that market-based siting policies does not ensure an efficient outcome. ► Developers and communities relationship may suffer from relevant transaction costs

  9. 18 CFR 292.209 - Exceptions from requirements for hydroelectric small power production facilities located at a new...

    Science.gov (United States)

    2010-04-01

    ... requirements for hydroelectric small power production facilities located at a new dam or diversion. 292.209... Exceptions from requirements for hydroelectric small power production facilities located at a new dam or... the Federal Power Act, at which non-Federal hydroelectric development is permissible; or (2) An...

  10. methodological and technical aspects to be considered in the location of physical recreational sports facilities

    Directory of Open Access Journals (Sweden)

    Jesús I. Benítez Llanes

    2012-03-01

    Full Text Available Sometimes we wonder. Why practitioners of recreational physical activities do not make systematic use of a particular sports facility ?, Why some sports facility remains almost always empty? Why it is continued unnecessarily reversed large sums of material resources for maintenance? For the simple reason that sports facilities were from the beginning that were not well conceived and designed architecturally, where among other things, not sporting habits and population size of the place properly examined. Similarly, we have witnessed criteria issued regarding the performance of a specific sports field, far from contributing to the extension and improvement of the practice of recreational physical and sports activities in its various manifestations, its null or poor continuous maintenance contributing negatively to limit the sporting life and lacerate mental and physical welfare of the inhabitants of the environment. Justifications that led the author of this research to the development of methodological technical aspects regarding the location of recreational physical sports infrastructure, content which also form part of the subject and / or curricular unit "Spaces and Sports Facilities" currently teaches future professionals and managers of Physical Culture for the last two academic years at the University of the Sciences of Physical Culture and Sport Nancy Uranga Romagoza in Pinar del Río Cuba and the Iberoamerican University of Sport in Venezuela.

  11. ENVIRONMENTAL SAMPLING USING LOCATION SPECIFIC AIR MONITORING IN BULK HANDLING FACILITIES

    Energy Technology Data Exchange (ETDEWEB)

    Sexton, L.; Hanks, D.; Degange, J.; Brant, H.; Hall, G.; Cable-Dunlap, P.; Anderson, B.

    2011-06-07

    Since the introduction of safeguards strengthening measures approved by the International Atomic Energy Agency (IAEA) Board of Governors (1992-1997), international nuclear safeguards inspectors have been able to utilize environmental sampling (ES) (e.g. deposited particulates, air, water, vegetation, sediments, soil and biota) in their safeguarding approaches at bulk uranium/plutonium handling facilities. Enhancements of environmental sampling techniques used by the IAEA in drawing conclusions concerning the absence of undeclared nuclear materials or activities will soon be able to take advantage of a recent step change improvement in the gathering and analysis of air samples at these facilities. Location specific air monitoring feasibility tests have been performed with excellent results in determining attribute and isotopic composition of chemical elements present in an actual test-bed sample. Isotopic analysis of collected particles from an Aerosol Contaminant Extractor (ACE) collection, was performed with the standard bulk sampling protocol used throughout the IAEA network of analytical laboratories (NWAL). The results yielded bulk isotopic values expected for the operations. Advanced designs of air monitoring instruments such as the ACE may be used in gas centrifuge enrichment plants (GCEP) to detect the production of highly enriched uranium (HEU) or enrichments not declared by a State. Researchers at Savannah River National Laboratory in collaboration with Oak Ridge National Laboratory are developing the next generation of ES equipment for air grab and constant samples that could become an important addition to the international nuclear safeguards inspector's toolkit. Location specific air monitoring to be used to establish a baseline environmental signature of a particular facility employed for comparison of consistencies in declared operations will be described in this paper. Implementation of air monitoring will be contrasted against the use of smear

  12. Strategic closed-loop facility location problem with carbon market trading

    DEFF Research Database (Denmark)

    Diabat, A.; Abdallah, T.; Al-Refaie, A.

    2013-01-01

    and recovery of products in a closed-loop configuration. Remanufacturing is the basis of profit-oriented reverse logistics in which recovered products are restored to a marketable condition in order to be resold to the primary or secondary market. In this paper, we introduce a multiechelon multicommodity...... facility location problem with a trading price of carbon emissions and a cost of procurement. The company might either incur costs if the carbon cap, normally assigned by regulatory agencies, is lower than the total emissions, or gain profit if the carbon cap is higher than the total emissions. A numerical...

  13. An improved cut-and-solve algorithm for the single-source capacitated facility location problem

    DEFF Research Database (Denmark)

    Gadegaard, Sune Lauth; Klose, Andreas; Nielsen, Lars Relund

    2018-01-01

    In this paper, we present an improved cut-and-solve algorithm for the single-source capacitated facility location problem. The algorithm consists of three phases. The first phase strengthens the integer program by a cutting plane algorithm to obtain a tight lower bound. The second phase uses a two......-level local branching heuristic to find an upper bound, and if optimality has not yet been established, the third phase uses the cut-and-solve framework to close the optimality gap. Extensive computational results are reported, showing that the proposed algorithm runs 10–80 times faster on average compared...

  14. Special case waste located at Oak Ridge National Laboratory facilities: Survey report

    International Nuclear Information System (INIS)

    Forgy, J.R. Jr.

    1995-11-01

    Between October 1994 and October 1995, a data base was established at the Oak Ridge National Laboratory (ORNL) to provide a current inventory of the radioactive waste materials, located at ORNL, for which the US Department of Energy (DOE) has no definite planned disposal alternatives. DOE refers to these waste materials as special case waste. To assist ORNL and DOE management in future planning, an inventory system was established and a baseline inventory prepared. This report provides the background of the ORNL special case waste survey project, as well as special case waste category definitions, both current and anticipated sources and locations of special case waste materials, and the survey and data management processes. Special case waste will be that waste material which, no matter how much practical characterization, treatment, and packaging is made, will never meet the acceptance criteria for permanent disposal at ORNL, and does not meet the criteria at a currently planned off-site permanent disposal facility

  15. An Application Of Facility Location Models With Hotspot Analysis For Optimal Location Of Abattoir Bio-Energy Plant In Anambra State Of Nigeria

    Directory of Open Access Journals (Sweden)

    E. C. Chukwuma

    2015-08-01

    Full Text Available Poor waste management strategy in abattoir in the the study area has needs a major attention considering it negative impacts on man land and water. Sitting of centralized biogas plant in a strategic location in the state would be the major means of combating the environmental challenges of increase in abattoir waste generation as result of population explosion in the state. This study investigates optimal location for sitting central abattoir waste treatment facility in Anambra State of Nigeria using facility location models with hotspot analysis in GIS environment. The result of the study shows that Using centre of gravity model the central location was estimated to be at Xc Yc 6.900953016 6.110157865. Based on inadequacy of the model hotspot analysis operation was done the hotspot analysis delineated clusters of abattoirs significantly higher in bio-wastes production than the overall study area. The hotspot analysis shows that the West regions of the study area has many abattoir that is classified as hotspot abattoirs. Using the hotspot abattoirs as proposed sites for load-distance model three abattoirs were identified as proposed sites- Obosi slaugher house Nkpor Private slaughter house and Oye-olise Ogbunike slaugher house. Their load distance values are 17250.40058 16299.24005 and 18210.14631 respectively. The optimal location for construction of central abattoir bio-waste treatment facility based on the application of these location facility models and hotspot analysis is Nkpor private slaughter house or its environs.

  16. Integrated social facility location planning for decision support: Accessibility studies provide support to facility location and integration of social service provision

    CSIR Research Space (South Africa)

    Green, Cheri A

    2012-09-01

    Full Text Available for two or more facilities to create an integrated plan for development Step 6 Costing of development plan Case Study Access norms and thresholds guidelines in accessibility analysis Appropriate norms/provision guidelines facilitate both service... access norms and threshold standards ?Test the relationship between service demand and the supply (service capacity) of the facility provision points within a defined catchment area ?Promote the ?right?sizing? of facilities relative to the demand...

  17. Why asbestos should be banned

    NARCIS (Netherlands)

    Cremers, J.

    2013-01-01

    There has been an outburst of public anger after the ‘discovery’ of asbestos polluted social housing, despite there being several other topical asbestos related incidents. This coupled with the spectacular Turin trial against some captains of industry who were sentenced for knowingly exposing their

  18. Asbestos pollution in an inactive mine: determination of asbestos fibers in the deposit tailings and water.

    Science.gov (United States)

    Koumantakis, Emmanouil; Kalliopi, Anastasiadou; Dimitrios, Kalderis; Gidarakos, Evangelos

    2009-08-15

    An inactive asbestos mine in Northern Greece, known as MABE, had been operational for 18 years, showing an annual chrysotile production of approximately 100,000 tons. It is estimated that a total of 68 million tons of the mineral serpentine were excavated from the mine, of which 881,000 tons of chrysotile asbestos were produced. The mine deposits are located very near to the river Aliakmonas. The water of the river is extensively used as drinking water, as well as for irrigation. This study estimated the amount of asbestos currently present in the deposits, to at least 1.33 million tons. This is a 10-fold increase since the start of mine operation in 1982. Water samples obtained throughout the river had high chrysotile concentrations, in most cases far exceeding EPA's standard value (7 x 10(6)f/l). Therefore, the mine and the deposits urgently require remediation works, such as removal of large contaminated objects from the mine buildings and re-vegetation of the deposit areas, in order to reduce the asbestos levels in the river water.

  19. The spatial and urban planning concerns related to nuclear facilities locations: Case study of the Vinča Institute location

    Directory of Open Access Journals (Sweden)

    Stefanović Nebojša D.

    2017-01-01

    Full Text Available The spatial and urban planning is one of the key instruments for the planned formation and development of locations for nuclear facilities, especially in terms of meeting the strict spatial conditionality, as well as in terms of the formation of protection zones in their surroundings. This paper systemizes the international criteria and requirements for the locations of nuclear facilities and analyses the spatial distribution of nuclear facilities in the surrounding countries of the Republic of Serbia. The research was conducted on the example of the location of the Vinča Institute of Nuclear Sciences, within which the fulfilment of spatial requirements, treatment of the location in the existing spatial and urban plans and relationship between other functions in the surrounding area were analysed. The paper proves the starting hypothesis that the general requirements related to both the spatial development of nuclear facilities locations and the protection from radiation have not been met in the Vinča location and its surroundings. It was determined that the spatial and urban plans encompassing the area of Vinča do not contain sufficiently specific planning solutions and that, as such, they do not provide a sufficient planning basis for meeting the necessary requirements and obligations regarding the protection from radiation. The paper also gives recommendations for further spatial development and protection of the Vinča location and its surroundings. The research condcted in this paper indicates the importance and priority of further research so that the necessary planning solutions for further development of the complex in Vinča and for the formation of protection zones could be defined through creating a new planning documentation. In addition, the paper particularly highlights the need for conducting a research to identify a location for permanent disposal of radioactive waste. It also indicates the necessity of considering the aspects

  20. The effect of the guard location in a nuclear facility on performance criteria

    International Nuclear Information System (INIS)

    Lee, Hyun-Chul; Hwang, In-Koo; An, Jin-Soo

    2002-01-01

    Full text: The major functions of a physical protection system (PPS) are detection, delay, and response. Detection function is mainly to sense an adversary's intrusion and assess alarm events, and its physical implementation includes intrusion sensors, alarm communication systems and entry control facilities. Delay function can be accomplished through various passive and active barriers, makes adversary's advance toward his goal slow. Response function is to practically stop adversary actions. There are response guards responsible for the response function in a nuclear facility. They can be located at one or more posts to take action against adversary's progress after alarm occurred. The mostly used quantitative effectiveness measure of a PPS is the probability of interruption (PI) derived from delay time after detection and guard response time. Delay time is a variable dependent on adversary's capabilities and guard response time varies with the distance between a guard post and destination to be dispatched. According to the advanced technology of digital computing, software programs such as SAVI (System Analysis of Vulnerability to Intrusion) provide PI based on user input including adversary capability, protective elements, guard response time, and other PPS information. However guard response time is considered as a constant not a variable. That means same guard response time is always set regardless of the variable guard travel time from a post to a location where guards can interrupt the adversary's action. Since the location of guards may be easily changed in contrast to detection elements or delay elements and can be considered as a flexible mean against temporarily upgraded threat, a trial to investigate the changes of PI and CDP (Critical Detection Point) in case that guard response time is a variable was started. We defined several detection and delay elements along an adversary intrusion path and guard travel times as many as the number of detection

  1. Inferring Groups of Objects, Preferred Routes, and Facility Locations from Trajectories

    DEFF Research Database (Denmark)

    Ceikute, Vaida

    (i) infer groups of objects traveling together, (ii) determine routes preferred by local drivers, and (iii) identify attractive facility locations. First, we present framework that efficiently supports online discovery of groups of moving objects that travel together. We adopt a sampling......-independent approach that makes no assumptions about when object positions are sampled and that supports the use of approximate trajectories. The framework’s algorithms exploit density-based clustering to identify groups. Such identified groups are scored based on cardinality and duration. With the use of domination...... and similarity notions, groups of low interest are pruned, and a variety of different, interesting groups are returned. Results from empirical studies with real and synthetic data offer insight into the effectiveness and efficiency of the proposed framework. Next, we view GPS trajectories as trips that represent...

  2. Asbestos fiber release from the brake pads of overhead industrial cranes.

    Science.gov (United States)

    Spencer, J W; Plisko, M J; Balzer, J L

    1999-06-01

    The purpose of this evaluation was to determine the actual contribution of airborne asbestos fibers to the work environment from the operation of overhead cranes and hoists that use asbestos composition brake pads. The evaluation was conducted in a working manufacturing facility. Other potential sources of asbestos were accounted for by visual inspection and background air monitoring. An overhead crane assembly comprised of a trolley and two hoists was employed for this study. The crane was operated for two consecutive eight-hour shifts representative of a heavy-duty cycle. Forty-four personal and area air samples were collected during the assessment. Asbestos fibers were analyzed for by phase contrast (NIOSH 7400), and transmission electron (NIOSH 7402) microscopy methods. Eight-hour time-weighted average (TWA) asbestos fiber concentrations ranged from cranes.

  3. BOA: Pipe asbestos insulation removal robot system

    International Nuclear Information System (INIS)

    Schempf, H.; Bares, J.; Schnorr, W.

    1995-01-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  4. Selection of facility location under environmental damage priority and using ELECTRE method.

    Science.gov (United States)

    Gundogdu, Ceren Erdin

    2011-03-01

    In the recent years, the environmental problems have reached to a vital extent, which is pushing the boundaries and far beyond daily evaluations. Industrial plants, the energy sources and uncontrolled release of pollutant gases (SO2, CO2 etc.) in the production stage have the greatest share in the occurrence of unfavorable environmental conditions. For this reason, the dimension of the problems that may arise in the production stage of industrial plants is directly related to the selection of facility location. In this study, geographical regions (a total of 7 regions) of our country have been analyzed in terms of environmental values based on their basins and the unfavorable environmental problems that are currently being experienced. Considered as such, with the directives of an expert group composed of nature scientists, the criteria and alternative areas are determined using the data gathered on ecosystem, basin characteristics, and land types. Since the primary goal is to keep the environmental damages at the minimum level, comprehensive definition of the problem is constructed by consultation of the expert group and the criteria are determined. Considering the fact that it will prevent the drawbacks generated by making decisions depending on certain stereotypes toa great extent, ELECTRE (Elimination and Choice Translating Reality English - Elimination Et Choix Traduisant la Realite) method is used to determine in which geographic region our country's industrial plants should be located.

  5. Further development of a facility for channeling studies: application to lattice location

    International Nuclear Information System (INIS)

    Lopes, D.R.

    1984-08-01

    Equipment modifications at the Lawrence Berkeley Laboratory (LBL) Rutherford backscattering facility, including the addition of a high precision goniometer, have been made to enhance the performance of channeling experiments. The angular divergence of the alpha particle beam was also reduced to 0 by improving the collimation. To demonstrate improved channeling capability angular scans were performed about the [100], [110], and [111] axial channels of a 3400 A (100) silicon membrane. Both the minimum yield, chi/sub min/, and the critical angle, psi/sub 1/2/, were consistent with accepted values. A preliminary investigation of the lattice location of cobalt on the (100) silicon surface was undertaken. Approximately 4.5 x 10 15 Co atoms/cm 2 were electron beam deposited on a 3900 A, HF etched silicon membrane in a system using oilless pumps. Preliminary channeling data taken approximately one month later indicated a preferred site for approximately 16% of the cobalt atoms. Channeling data obtained six months later with the new goniometer showed no evidence for a preferred site. Room temperature oxidation between experiments was observed and is thought to have affected the location of the cobalt atoms. 33 references, 15 figures

  6. DEMOLISHING A COLD-WAR-ERA FULE-STORAGE BASIN SUPERSTRUCTURE LADEN WITH ASBESTOS

    International Nuclear Information System (INIS)

    LLOYD, E.R.; STEVENS, J.M.; DAGAN, E.B.; ORGILL, T.K.; GREEN, M.A.; LARSON, C.H.; ZINSLI, L.C.

    2009-01-01

    The K East (KE) Basin facilities are located near the north end of the Hanford Site's 100 K area. The facilities were built in 1950 as part of the KE Reactor complex and constructed within 400 meters of the Columbia River, which is the largest river in the Pacific Northwest and by volume the fourth largest river in the United States. The basin, located adjacent to the reactor, was used for the underwater storage of irradiated nuclear fuel discharged from the reactor. The basin was covered by a superstructure comprising steel columns and beams, concrete, and cement asbestos board (CAB) siding. The project's mission was to complete demolition of the structure over the KE Basin within six months of turnover from facility deactivation activities. The demolition project team applied open-air demolition techniques to bring the facility to slab-on-grade. Several innovative techniques were used to control contamination and maintain contamination control within the confines of the demolition exclusion zone. The techniques, which focused on a defense-in-depth approach, included spraying fixatives on interior and exterior surfaces before demolition began; applying fixatives during the demolition; misting using a fine spray of water during demolition; and demolishing the facility systematically. Another innovative approach that made demolition easier was to demolish the building with the non-friable CAB remaining in place. The CAB siding covered the exterior of the building and portions of the interior walls, and was an integral part of the multiple-layered roof. The project evaluated the risks involved in removing the CAB material in a radiologically contaminated environment and determined that radiological dose rates and exposure to radiological contamination and industrial hazards would be significantly reduced by using heavy equipment to remove the CAB during demolition. The ability to perform this demolition safely and without spreading contamination (radiological or

  7. Environmental Assessment for the off-site commercial cleaning of lead and asbestos contaminated laundry from the Savannah River Site

    International Nuclear Information System (INIS)

    1995-12-01

    This Environmental Assessment (EA) has been prepared by the Department of Energy (DOE) to assess the potential environmental impacts of off-site commercial cleaning of lead and asbestos contaminated laundry generated at the Savannah River Site (SRS), located near Aiken, South Carolina. The proposed action constitutes an addition to the already-implemented action of sending controlled and routine SRS laundry to an off-site commercial facility for cleaning. This already-implemented action was evaluated in a previous EA (i.e., DOE/EA-0990; DOE, 1994) prepared under the National Environmental Policy Act of 1969 (NEPA)

  8. A simulation-based robust biofuel facility location model for an integrated bio-energy logistics network

    Directory of Open Access Journals (Sweden)

    Jae-Dong Hong

    2014-10-01

    Full Text Available Purpose: The purpose of this paper is to propose a simulation-based robust biofuel facility location model for solving an integrated bio-energy logistics network (IBLN problem, where biomass yield is often uncertain or difficult to determine.Design/methodology/approach: The IBLN considered in this paper consists of four different facilities: farm or harvest site (HS, collection facility (CF, biorefinery (BR, and blending station (BS. Authors propose a mixed integer quadratic modeling approach to simultaneously determine the optimal CF and BR locations and corresponding biomass and bio-energy transportation plans. The authors randomly generate biomass yield of each HS and find the optimal locations of CFs and BRs for each generated biomass yield, and select the robust locations of CFs and BRs to show the effects of biomass yield uncertainty on the optimality of CF and BR locations. Case studies using data from the State of South Carolina in the United State are conducted to demonstrate the developed model’s capability to better handle the impact of uncertainty of biomass yield.Findings: The results illustrate that the robust location model for BRs and CFs works very well in terms of the total logistics costs. The proposed model would help decision-makers find the most robust locations for biorefineries and collection facilities, which usually require huge investments, and would assist potential investors in identifying the least cost or important facilities to invest in the biomass and bio-energy industry.Originality/value: An optimal biofuel facility location model is formulated for the case of deterministic biomass yield. To improve the robustness of the model for cases with probabilistic biomass yield, the model is evaluated by a simulation approach using case studies. The proposed model and robustness concept would be a very useful tool that helps potential biofuel investors minimize their investment risk.

  9. A PROCEDURE FOR DETERMINING OPTIMAL FACILITY LOCATION AND SUB-OPTIMAL POSITIONS

    Directory of Open Access Journals (Sweden)

    P.K. Dan

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This research presents a methodology for determining the optimal location of a new facility, having physical flow interaction of various degrees with other existing facilities in the presence of barriers impeding the shortest flow-path as well as the sub-optimal iso-cost positions. It also determines sub-optimal iso-cost positions with additional cost or penalty for not being able to site it at the computed optimal point. The proposed methodology considers all types of quadrilateral barrier or forbidden region configurations to generalize and by-pass such impenetrable obstacles, and adopts a scheme of searching through the vertices of the quadrilaterals to determine the alternative shortest flow-path. This procedure of obstacle avoidance is novel. Software has been developed to facilitate computations for the search algorithm to determine the optimal and iso-cost co-ordinates. The test results are presented.

    AFRIKAANSE OPSOMMING: Die navorsing behandel ‘n procedure vir die bepaling van optimum stigtingsposisie vir ‘n onderneming met vloei vanaf ander bestaande fasiliteite in die teenwoordigheid van ‘n verskeidenheid van randvoorwaardes. Die prodedure lewer as resultaat suboptimale isokoste-stigtingsplekke met bekendmaking van die koste wat onstaan a.g.v. afwyking van die randvoorwaardlose optimum oplossingskoste, die prosedure maak gebruik van ‘n vindingryke soekmetode wat toegepas word op niersydige meerkundige voorstellings vir die bepaling van korste roetes wat versperring omseil. Die prosedure word onderskei deur programmatuur. Toetsresultate word voorgehou.

  10. Variation in Hospice Services by Location of Care: Nursing Home Versus Assisted Living Facility Versus Home.

    Science.gov (United States)

    Unroe, Kathleen T; Bernard, Brittany; Stump, Timothy E; Tu, Wanzhu; Callahan, Christopher M

    2017-07-01

    To describe differences in hospice services for patients living at home, in nursing homes or in assisted living facilities, including the overall number and duration of visits by different hospice care providers across varying lengths of stay. Retrospective cohort study using hospice patient electronic medical record data. Large, national hospice provider. Data from 32,605 hospice patients who received routine hospice care from 2009 to 2014 were analyzed. Descriptive statistics were calculated for utilization measures for each type of provider and by location of care. Frequency and duration of service contacts were standardized to a 1 week period and pairwise comparisons were used to detect differences in care provided between the three settings. Minimal differences were found in overall intensity of service contacts across settings, however, the mix of services were different for patients living at home versus nursing home versus assisted living facility. Overall, more nurse care was provided at the beginning and end of the hospice episode; intensity of aide care services was higher in the middle portion of the hospice episode. Nearly 43% of the sample had hospice stays less than 2 weeks and up to 20% had stays greater than 6 months. There are significant differences between characteristics of hospice patients in different settings, as well as the mix of services they receive. Medicare hospice payment methodology was revised starting in 2016. While the new payment structure is in greater alignment with the U shape distribution of services, it will be important to evaluate the impact of the new payment methodology on length of stay and mix of services by different providers across settings of care. © 2017, Copyright the Authors Journal compilation © 2017, The American Geriatrics Society.

  11. Generic Design, Technical Guidelines and Optimal Location of Tsetse Fly Mass-Rearing Facilities. Working Material

    International Nuclear Information System (INIS)

    2004-01-01

    of these AW-IPM based efforts to create T and T free zones. It is, therefore, foreseeable that the demand for good quality sterile tsetse fly males will increase. This is already resulting in proposals to establish additional tsetse fly mass-rearing facilities in Africa. AW-IPM programmes against T and T involving a SIT component will require high investments at an early stage of programme implementation, particularly for the mass-rearing facilities. In order to realize optimum efficacy and efficiency, these programmes must be carefully planned and implemented in a consistent and flexible manner over sufficiently large areas and a rather long time frame. Decisions on the geographic location and design of rearing facilities must be objective, and based on sound assessment criteria. A meeting of expert consultants was convened in Vienna, Austria October 11-15, 2004 under the auspices of FAO/IAEA, in an effort to assist countries in planning the geographic location and in designing large tsetse fly mass-rearing facilities. With regards to assessing the suitability of (proposed) tsetse mass-rearing locations, the meeting identified a number of critical, important and desirable criteria under four (4) main categories, namely Site Characteristics, Climate and Environment, Manpower and Infrastructure and Social and Political supports. A worksheet was developed to summarize scores reached for the identified criteria, in order to ensure that the assessments are objective and verifiable. The meeting also elaborated on the concept of tsetse factory design, based on considerations regarding the involved rooms, their functions, ergonomic flow of the production process and other relevant factors. Required support services were identified and specifics were provided on aspects like controlled environment system design, desired room conditions and occupancy, air filtration and distribution and electricity supply. The consultants' recommendations underline that meeting and this

  12. Asbestos Exposure and Cancer Risk

    Science.gov (United States)

    ... for medical care, and, where necessary, medical and vocational rehabilitation assistance in returning to work. Benefits may ... asbestos Another EPA resource that may be of interest is the brochure titled Current Best Practices for ...

  13. Methods for detecting and locating leaks in containment facilities using electrical potential data and electrical resistance tomographic imaging techniques

    Science.gov (United States)

    Daily, William D.; Laine, Daren L.; Laine, Edwin F.

    1997-01-01

    Methods are provided for detecting and locating leaks in liners used as barriers in the construction of landfills, surface impoundments, water reservoirs, tanks, and the like. Electrodes are placed in the ground around the periphery of the facility, in the leak detection zone located between two liners if present, and/or within the containment facility. Electrical resistivity data is collected using these electrodes. This data is used to map the electrical resistivity distribution beneath the containment liner between two liners in a double-lined facility. In an alternative embodiment, an electrode placed within the lined facility is driven to an electrical potential with respect to another electrode placed at a distance from the lined facility (mise-a-la-masse). Voltage differences are then measured between various combinations of additional electrodes placed in the soil on the periphery of the facility, the leak detection zone, or within the facility. A leak of liquid though the liner material will result in an electrical potential distribution that can be measured at the electrodes. The leak position is located by determining the coordinates of an electrical current source pole that best fits the measured potentials with the constraints of the known or assumed resistivity distribution.

  14. Characterization of the Old Hydrofracture Facility (OHF) waste tanks located at ORNL

    International Nuclear Information System (INIS)

    Keller, J.M.; Giaquinto, J.M.; Meeks, A.M.

    1997-04-01

    The Old Hydrofracture Facility (OHF) is located in Melton Valley within Waste Area Grouping (WAG) 5 and includes five underground storage tanks (T1, T2, T3, T4, and T9) ranging from 13,000 to 25,000 gal. capacity. During the period of 1996--97 there was a major effort to re-sample and characterize the contents of these inactive waste tanks. The characterization data summarized in this report was needed to address waste processing options, examine concerns dealing with the performance assessment (PA) data for the Waste Isolation Pilot Plant (WIPP), evaluate the waste characteristics with respect to the waste acceptance criteria (WAC) for WIPP and Nevada Test Site (NTS), address criticality concerns, and to provide the data needed to meet DOT requirements for transporting the waste. This report discusses the analytical characterization data collected on both the supernatant and sludge samples taken from three different locations in each of the OHF tanks. The isotopic data presented in this report supports the position that fissile isotopes of uranium ( 233 U and 235 U) do not satisfy the denature ratios required by the administrative controls stated in the ORNL LLLW waste acceptance criteria (WAC). The fissile isotope of plutonium ( 239 Pu and 241 Pu) are diluted with thorium far above the WAC requirements. In general, the OHF sludge was found to be hazardous (RCRA) based on total metal content and the transuranic alpha activity was well above the 100 nCi/g limit for TRU waste. The characteristics of the OHF sludge relative to the WIPP WAC limits for fissile gram equivalent, plutonium equivalent activity, and thermal power from decay heat were estimated from the data in this report and found to be far below the upper boundary for any of the remote-handled transuranic waste (RH-TRU) requirements for disposal of the waste in WIPP

  15. Comparison of soil sampling and analytical methods for asbestos at the Sumas Mountain Asbestos Site-Working towards a toolbox for better assessment.

    Science.gov (United States)

    Wroble, Julie; Frederick, Timothy; Frame, Alicia; Vallero, Daniel

    2017-01-01

    Established soil sampling methods for asbestos are inadequate to support risk assessment and risk-based decision making at Superfund sites due to difficulties in detecting asbestos at low concentrations and difficulty in extrapolating soil concentrations to air concentrations. Environmental Protection Agency (EPA)'s Office of Land and Emergency Management (OLEM) currently recommends the rigorous process of Activity Based Sampling (ABS) to characterize site exposures. The purpose of this study was to compare three soil analytical methods and two soil sampling methods to determine whether one method, or combination of methods, would yield more reliable soil asbestos data than other methods. Samples were collected using both traditional discrete ("grab") samples and incremental sampling methodology (ISM). Analyses were conducted using polarized light microscopy (PLM), transmission electron microscopy (TEM) methods or a combination of these two methods. Data show that the fluidized bed asbestos segregator (FBAS) followed by TEM analysis could detect asbestos at locations that were not detected using other analytical methods; however, this method exhibited high relative standard deviations, indicating the results may be more variable than other soil asbestos methods. The comparison of samples collected using ISM versus discrete techniques for asbestos resulted in no clear conclusions regarding preferred sampling method. However, analytical results for metals clearly showed that measured concentrations in ISM samples were less variable than discrete samples.

  16. Toxicity evaluation for the broad area of the asbestos mine of northern Greece.

    Science.gov (United States)

    Anastasiadou, Kalliopi; Gidarakos, Evangelos

    2007-01-02

    The existing data regarding the quality of the environment in the asbestos mine of northern Greece (MABE) region related to the presence of asbestos are insufficient to determine the current pollution problem. In the present work, a first approach to this problem has been taken through a toxicity risk assessment. The environmental quality of an open air asbestos mine was evaluated over a long period of time by measuring and monitoring the concentration of asbestos fibres in air, soil and water. Air measurements were made to determine the concentration of asbestos fibres in the atmospheric air of the mine, the depositions and the nearby villages. The asbestos fibre concentration was also specified inside the building facilities of MABE. Analyses of soil, dust and water samples were carried out showing the presence of enormous quantities of chrysotile asbestos. The concentration of asbestos fibres in the atmospheric air was compared to older measurements that were taken at the same sampling points during the operation of the mine. The results of this work, in conjunction with individual researches that have been carried out in the past and with the evaluation of international standards of scientific and experience-based findings, provide a reliable framework with which to estimate the threat of MABE to its surrounding environment, and help to determine a basic criterion for the remediation and rehabilitation of the region. In addition, mathematical models based on human and animal studies were used to estimate the probability of a person developing cancer from breathing air containing asbestos fibres in the wider vicinity of the mine in order to define appropriate procedures for evaluating asbestos-related risk.

  17. Results of operation and current safety performance of nuclear facilities located in the Russian Federation

    Science.gov (United States)

    Kuznetsov, V. M.; Khvostova, M. S.

    2016-12-01

    After the NPP radiation accidents in Russia and Japan, a safety statu of Russian nuclear power plants causes concern. A repeated life time extension of power unit reactor plants, designed at the dawn of the nuclear power engineering in the Soviet Union, power augmentation of the plants to 104-109%, operation of power units in a daily power mode in the range of 100-70-100%, the use of untypical for NPP remixed nuclear fuel without a careful study of the results of its application (at least after two operating periods of the research nuclear installations), the aging of operating personnel, and many other management actions of the State Corporation "Rosatom", should attract the attention of the Federal Service for Ecological, Technical and Atomic Supervision (RosTekhNadzor), but this doesn't happen. The paper considers safety issues of nuclear power plants operating in the Russian Federation. The authors collected statistical information on violations in NPP operation over the past 25 years, which shows that even after repeated relaxation over this period of time of safety regulation requirements in nuclear industry and highly expensive NPP modernization, the latter have not become more safe, and the statistics confirms this. At a lower utilization factor high-power pressure-tube reactors RBMK-1000, compared to light water reactors VVER-440 and 1000, have a greater number of violations and that after annual overhauls. A number of direct and root causes of NPP mulfunctions is still high and remains stable for decades. The paper reveals bottlenecks in ensuring nuclear and radiation safety of nuclear facilities. Main outstanding issues on the storage of spent nuclear fuel are defined. Information on emissions and discharges of radioactive substances, as well as fullness of storages of solid and liquid radioactive waste, located at the NPP sites are presented. Russian NPPs stress test results are submitted, as well as data on the coming removal from operation of NPP

  18. Planning the location of facilities to implement a reverse logistic system of post-consumer packaging using a location mathematical model.

    Science.gov (United States)

    Couto, Maria Claudia Lima; Lange, Liséte Celina; Rosa, Rodrigo de Alvarenga; Couto, Paula Rogeria Lima

    2017-12-01

    The implementation of reverse logistics systems (RLS) for post-consumer products provides environmental and economic benefits, since it increases recycling potential. However, RLS implantation and consolidation still face problems. The main shortcomings are the high costs and the low expectation of broad implementation worldwide. This paper presents two mathematical models to decide the number and the location of screening centers (SCs) and valorization centers (VCs) to implement reverse logistics of post-consumer packages, defining the optimum territorial arrangements (OTAs), allowing the inclusion of small and medium size municipalities. The paper aims to fill a gap in the literature on RLS location facilities that not only aim at revenue optimization, but also the participation of the population, the involvement of pickers and the service universalization. The results showed that implementation of VCs can lead to revenue/cost ratio higher than 100%. The results of this study can supply companies and government agencies with a global view on the parameters that influence RLS sustainability and help them make decisions about the location of these facilities and the best reverse flows with the social inclusion of pickers and serving the population of small and medium-sized municipalities.

  19. Earth mineral resource of the month: asbestos

    Science.gov (United States)

    Virta, Robert L.

    2010-01-01

    The article discusses the characteristics and feature of asbestos. According to the author, asbestos is a generic name for six needle-shaped minerals that possess high tensile strengths, flexibility, and resistance to chemical and thermal degradation. These minerals are actinolite, amosite, anthophyllite, chrysolite, crocilodite and tremolite. Asbestos is used for strengthening concrete pipe, plastic components, and gypsum plasters.

  20. Assessment Of Market Facilities And Locational Effects On Adjoining Neighborhoods In Nigerian Urban Centers Empirical Evidence From Akure Nigeria

    Directory of Open Access Journals (Sweden)

    Adeyinka S. A.

    2015-08-01

    Full Text Available There is the need for people to buy and sell and transact their businesses in a way that life can go on normally. This study examined the markets facilities level and locational effects on adjoining neighbourhoods in Akure Township. Both primary and secondary data types were employed in the study primary data were collected through the administration of questionnaire on traders and patronsbuyers in the markets and residents of adjoining neighbourhoods and personal observation. Secondary data were collected from government publications. Data collected were analysed using descriptive statistical methods which included frequency counts and Likerts scale to analyse the satisfaction of traders and patrons on the facilities in the markets and severity of locational effects on residents of adjoining neighbourhoods. Findings from the study showed that facilities such as parking spaces fire extinguishers circulation spaces within the markets trading spaces safe area for children perimeter fencing and loading and off-loading bay were inadequately provided. While on-street display of goods traffic congestion air pollution on-street parking due to inadequate parking spaces were the severely perceived locational effects. The study concluded that facilities in the markets were inadequate and that markets constitute nuisances to the adjoining areas. It hereby recommends that markets in the study area be provided with the required level of facilities to prevent future urban problems.

  1. 30 CFR 947.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which include the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 947.827 Section 947.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  2. 30 CFR 912.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which includes the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 912.827 Section 912.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  3. 30 CFR 922.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which include the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 922.827 Section 922.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  4. 30 CFR 937.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which include the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 937.827 Section 937.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  5. 30 CFR 910.827 - Special performance standards-coal processing plants and support facilities not located at or...

    Science.gov (United States)

    2010-07-01

    ... mining and reclamation operations which includes the operation of coal processing plants and support... plants and support facilities not located at or near the minesite or not within the permit area for a mine. 910.827 Section 910.827 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  6. BOA II: pipe-asbestos insulation removal system

    International Nuclear Information System (INIS)

    Schempf, H.; Mutschler; Boehmke, S.; Chemel, B.; Piepgras, C.

    1996-01-01

    BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to high labor costs and high level of radioactive contamination, making manual removal costly and inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  7. Facility location of organ procurement organisations in Indian health care supply chain management

    Directory of Open Access Journals (Sweden)

    Rajmohan, M.

    2017-05-01

    Full Text Available In health care supply chain management, particularly in the area of organ transplantation, organ procurement and the transplantation network play an important role. The organ procurement organisation (OPO should coordinate so that organs are prepared and transported to the recipients when donors become available. The scarcity of organ supply leads to life-challenging issues for the organ recipient. In this research, the importance of the location of OPOs to coordinate with the transplant centres in India is considered, and a solution is provided by facilitating the identification of locations where organs can be procured and distributed to the nearest transplant location. The location of the distribution centres of organs are identified, based on the p-median model. This model minimises the weighted distance of the organ recipients. Initially, the demand or the population density of organ recipients with respect to particular location is recognised. Then, based on the p-median model, the location of OPOs is effectively identified. Experimental analysis proves that the proposed model performs well in facilitating the location of OPOs. The robustness of the proposed work is validated using a sensitivity analysis of the differences in the selection of OPOs when the estimated demand for organs varies.

  8. Assisted Living Facilities, Locations of Assisted Living Facilities identifed visually and placed on the Medical Multi-Hazard Mitigation layer., Published in 2006, 1:1200 (1in=100ft) scale, Noble County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Assisted Living Facilities dataset current as of 2006. Locations of Assisted Living Facilities identifed visually and placed on the Medical Multi-Hazard Mitigation...

  9. An Integrated Assessment of Location-Dependent Scaling for Microalgae Biofuel Production Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Andre M.; Abodeely, Jared; Skaggs, Richard; Moeglein, William AM; Newby, Deborah T.; Venteris, Erik R.; Wigmosta, Mark S.

    2014-06-19

    Successful development of a large-scale microalgae-based biofuels industry requires comprehensive analysis and understanding of the feedstock supply chain—from facility siting/design through processing/upgrading of the feedstock to a fuel product. The evolution from pilot-scale production facilities to energy-scale operations presents many multi-disciplinary challenges, including a sustainable supply of water and nutrients, operational and infrastructure logistics, and economic competitiveness with petroleum-based fuels. These challenges are addressed in part by applying the Integrated Assessment Framework (IAF)—an integrated multi-scale modeling, analysis, and data management suite—to address key issues in developing and operating an open-pond facility by analyzing how variability and uncertainty in space and time affect algal feedstock production rates, and determining the site-specific “optimum” facility scale to minimize capital and operational expenses. This approach explicitly and systematically assesses the interdependence of biofuel production potential, associated resource requirements, and production system design trade-offs. The IAF was applied to a set of sites previously identified as having the potential to cumulatively produce 5 billion-gallons/year in the southeastern U.S. and results indicate costs can be reduced by selecting the most effective processing technology pathway and scaling downstream processing capabilities to fit site-specific growing conditions, available resources, and algal strains.

  10. The integration of expert knowledge in decision support systems for facility location planning

    NARCIS (Netherlands)

    Arentze, T.A.; Borgers, A.W.J.; Timmermans, H.J.P.

    1995-01-01

    The integration of expert systems in DSS has led to a new generation of systems commonly referred to as knowledge-based or intelligent DSS. This paper investigates the use of expert system technology for the development of a knowledge-based DSS for the planning of retail and service facilities. The

  11. GIS-based approach for defining bioenergy facilities location: A case study in Northern Spain based on marginal delivery costs and resources competition between facilities

    Energy Technology Data Exchange (ETDEWEB)

    Panichelli, Luis; Gnansounou, Edgard [Laboratory of Energy Systems, Swiss Federal Institute of Technology, LASEN-ICARE-ENAC, Station 18, EPFL, CH-1015 Lausanne (Switzerland)

    2008-04-15

    This paper presents a GIS-based decision support system for selecting least-cost bioenergy locations when there is a significant variability in biomass farmgate price and when more than one bioenergy plant with a fixed capacity has to be placed in the region. The methodology tackles the resources competition problem between energy facilities through a location-allocation model based on least-cost biomass quantities. Whole system least delivery cost including intermediate bioenergy products is estimated. The methodology is based on a case study where forest wood residues (FWR) from final cuttings (FCs) are used to produce torrefied wood (TW) in two torrefaction plants (TUs) that supply a gasification unit (GU) in order to produce electricity. The provinces of Navarra, Bizkaia, Gipuzkoa, Alava, La Rioja, Cantabria and Burgos are assessed in order to find the best locations for settling down the TUs and the GU according to biomass availability, FWR and TW marginal delivery costs. (author)

  12. Innovative Solid State Lighting Replacements for Industrial and Test Facility Locations, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed effort will develop a solid-state LED replacement lamp for rocket engine test stand lighting and more general hazardous-location lighting. The LED...

  13. Department of Energy’s ARM Climate Research Facility External Data Center Operations Plan Located At Brookhaven National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Cialella, A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Gregory, L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Lazar, K. [Brookhaven National Lab. (BNL), Upton, NY (United States); Liang, M. [Brookhaven National Lab. (BNL), Upton, NY (United States); Ma, L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Tilp, A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wagener, R. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-05-01

    The External Data Center (XDC) Operations Plan describes the activities performed to manage the XDC, located at Brookhaven National Laboratory (BNL), for the Department of Energy’s Atmospheric Radiation Measurement (ARM) Climate Research Facility. It includes all ARM infrastructure activities performed by the Data Management and Software Engineering Group (DMSE) at BNL. This plan establishes a baseline of expectation within the ARM Operations Management for the group managing the XDC.

  14. Evaluation of Southern Quebec asbestos residues for CO2 sequestration by mineral carbonation

    Energy Technology Data Exchange (ETDEWEB)

    Beaudoin, G.; Hebert, R.; Constantin, M. [Laval Univ., Quebec City, PQ (Canada); Bonin, G. [LAB Chrysotile Inc., Black Lake, PQ (Canada); Dipple, G. [British Columbia Univ., Vancouver, BC (Canada)

    2003-08-01

    One alternative to help reduce carbon dioxide (CO{sub 2}) levels in the atmosphere is to sequester CO{sub 2} by mineral carbonation using ultramafic rock-hosted magnesian silicates (serpentine, olivine, talc). The carbonation process produces magnesite, which is a geologically stable and an environmentally safe magnesium carbonate. Three CO{sub 2} sinks exist in southern Quebec use such silicates. They are: (1) asbestos mill residues, (2) associated mine waste, and (3) ultramafic bedrock. Extraction of asbestos in the region has been accomplished from serpentinized harzburgite located in the Thetford Mines and Asbestos ophiolitic massifs and also from the highly sheared Pennington Sheet. The physical and chemical properties of magnesium silicate deposits greatly determine their carbonation potential. A wide range of properties was observed in samples obtained from almost all asbestos mill residues and waste. The reaction which takes place depends on the mineral content. The kinetics of the reactions are influenced by humidity and grain size.

  15. MRS/IS facility co-located with a repository: preconceptual design and life-cycle cost estimates

    International Nuclear Information System (INIS)

    Smith, R.I.; Nesbitt, J.F.

    1982-11-01

    A program is described to examine the various alternatives for monitored retrievable storage (MRS) and interim storage (IS) of spent nuclear fuel, solidified high-level waste (HLW), and transuranic (TRU) waste until appropriate geologic repository/repositories are available. The objectives of this study are: (1) to develop a preconceptual design for an MRS/IS facility that would become the principal surface facility for a deep geologic repository when the repository is opened, (2) to examine various issues such as transportation of wastes, licensing of the facility, and environmental concerns associated with operation of such a facility, and (3) to estimate the life cycle costs of the facility when operated in response to a set of scenarios which define the quantities and types of waste requiring storage in specific time periods, which generally span the years from 1990 until 2016. The life cycle costs estimated in this study include: the capital expenditures for structures, casks and/or drywells, storage areas and pads, and transfer equipment; the cost of staff labor, supplies, and services; and the incremental cost of transporting the waste materials from the site of origin to the MRS/IS facility. Three scenarios are examined to develop estimates of life cycle costs of the MRS/IS facility. In the first scenario, HLW canisters are stored, starting in 1990, until the co-located repository is opened in the year 1998. Additional reprocessing plants and repositories are placed in service at various intervals. In the second scenario, spent fuel is stored, starting in 1990, because the reprocessing plants are delayed in starting operations by 10 years, but no HLW is stored because the repositories open on schedule. In the third scenario, HLW is stored, starting in 1990, because the repositories are delayed 10 years, but the reprocessing plants open on schedule

  16. Smart facility location planning for Smart Cities: using GIS technology and facility provision standards for pro-active planning of social facilities to support smart growth

    CSIR Research Space (South Africa)

    Green, Chéri

    2016-08-01

    Full Text Available step toward “smart” planning processes to support smart cities of the future. A case study application in Cape Town is used to illustrate the application of the methodology of spatially matching supply and demand for facilities using GIS tools...

  17. Airborne asbestos concentrations associated with heavy equipment brake removal.

    Science.gov (United States)

    Madl, A K; Gaffney, S H; Balzer, J L; Paustenbach, D J

    2009-11-01

    Asbestos-containing brake linings were used in heavy-duty construction equipment such as tractors, backhoes, and bulldozers prior to the 1980s. While several published studies have evaluated exposures to mechanics during brake repair work, most have focused on automobiles and light trucks, not on heavy agricultural or construction vehicles. The purpose of this study is to characterize the airborne concentration of asbestos to workers and bystanders from brake wear debris during brake removal from 12 loader/backhoes and tractors manufactured between 1960 and 1980. Asbestos content in brake lining (average 20% chrysotile by polarized light microscopy) and brake wear debris [average 0.49% chrysotile by transmission electron microscopy (TEM)] was also quantified. Breathing zone samples on the lapel of mechanics (n = 44) and area samples at bystander (n = 34), remote (n = 22), and ambient (n = 12) locations were collected during 12 brake changes and analyzed using phase contrast microscopy (PCM) [National Institute for Occupational Safety and Health (NIOSH) 7400] and TEM (NIOSH 7402). In addition, the fiber distribution by size and morphology was evaluated according to the International Organization for Standardization method for asbestos. Applying the ratio of asbestos fibers:total fibers (including non-asbestos) as determined by TEM to the PCM results, the average airborne chrysotile concentrations (PCM equivalent) were 0.024 f/cc for the mechanic and 0.009 f/cc for persons standing 1.2-3.1 m from the activity during the period of exposure ( approximately 0.5 to 1 h). Considering the time involved in the activity, and assuming three brake jobs per shift, these results would convert to an average 8-h time-weighted average of 0.009 f/cc for a mechanic and 0.006 f/cc for a bystander. The results indicate that (i) the airborne concentrations for worker and bystander samples were significantly less than the current occupational exposure limit of 0.1 f/cc; (ii

  18. Location, Location, Location

    CERN Multimedia

    Clery, Daniel

    2007-01-01

    "When nations vie for massive international scientific facilities, science can take a back seat to politics and even sheer chance. Dealmakers say there's no magic formula for getting things right." (3 pages)

  19. Location, location, location

    CERN Multimedia

    Clery, Daniel

    2007-01-01

    "When nations vie for massive international scientific facilities, science can take a back seat to politics and even sheer chance. Dealmakers say there's no magic formula for getting things right." (4,5 pages)

  20. Exposure and risks from wearing asbestos mitts

    Directory of Open Access Journals (Sweden)

    Tindall Matthew

    2005-10-01

    Full Text Available Abstract Background Very high fibre inhalation exposure has been measured while people were wearing personal protective equipment manufactured from chrysotile asbestos. However, there is little data that relates specifically to wearing asbestos gloves or mitts, particularly when used in hot environments such as those found in glass manufacturing. The aim of this study was to assess the likely personal exposure to asbestos fibres when asbestos mitts were used. Results Three types of work activity were simulated in a small test room with unused mitts and artificially aged mitts. Neither pair of mitts were treated to suppress the dust emission. The measured respirable fibre exposure levels ranged from Conclusion People who wore asbestos mitts were likely to have been exposed to relatively low levels of airborne chrysotile asbestos fibres, certainly much lower than the standards that were accepted in the 1960's and 70's. The cancer risks from this type of use are likely to be very low.

  1. Mineralogical conversion of asbestos containing materials

    International Nuclear Information System (INIS)

    Pulsford, S.K.; Foltz, A.D.; Ek, R.B.

    1996-01-01

    The principal objective of the Technical Task Plan (TTP) is to demonstrate a thermal-chemical mineralogical asbestos conversion unit at the Hanford Site, which converts non-radiological asbestos containing materials (ACMs) into an asbestos-free material. The permanent thermal-chemical mineralogical conversion of ACMs to a non-toxic, non-hazardous, potentially marketable end product should not only significantly reduce the waste stream volumes but terminate the open-quotes cradle to graveclose quotes ownership liabilities

  2. Multi-criteria Decision Support System (DSS) for optimal locations of Soil Aquifer Treatment (SAT) facilities.

    Science.gov (United States)

    Tsangaratos, P; Kallioras, A; Pizpikis, Th; Vasileiou, E; Ilia, I; Pliakas, F

    2017-12-15

    Managed Aquifer Recharge is a wide-spread well-established groundwater engineering method which is largely seen as sound and sustainable solution to water scarcity hydrologically sensitive areas, such as the Circum Mediterranean. The process of site selection for the installation of a MAR facility is of paramount importance for the feasibility and effectiveness of the project itself, especially when the facility will include the use of waters of impaired quality as a recharge source, as in the case of Soil-Aquifer-Treatment systems. The main objective of this study is to present the developed framework of a multi-criteria Decision Support System (DSS) that integrates within a dynamic platform the main groundwater engineering parameters associated with MAR applications together with the general geographical features which determine the effectiveness of such a project. The proposed system will provide an advanced coupled DSS-GIS tool capable of handling local MAR-related issues -such as hydrogeology, topography, soil, climate etc., and spatially distributed variables -such as societal, economic, administrative, legislative etc., with special reference to Soil-Aquifer-Treatment technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Facility location of organ procurement organisations in Indian health care supply chain management

    OpenAIRE

    Rajmohan, M.; Theophilus, C.; Sumalatha, M.R.; Saravanakumar, S.

    2017-01-01

    In health care supply chain management, particularly in the area of organ transplantation, organ procurement and the transplantation network play an important role. The organ procurement organisation (OPO) should coordinate so that organs are prepared and transported to the recipients when donors become available. The scarcity of organ supply leads to life-challenging issues for the organ recipient. In this research, the importance of the location of OPOs to coordinate with the transplant cen...

  4. Asbestos-related diseases in automobile mechanics.

    Science.gov (United States)

    Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

    2012-01-01

    Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyse the frequency of pleural and parenchymal abnormalities on high-resolution computed tomography (HRCT) in a population of automobile mechanics. The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos-related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers; who in the case of disagreement discussed until they reached agreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Pleural plaques were observed in five cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in one case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers.

  5. A Novel Hierarchical Model to Locate Health Care Facilities with Fuzzy Demand Solved by Harmony Search Algorithm

    Directory of Open Access Journals (Sweden)

    Mehdi Alinaghian

    2014-08-01

    Full Text Available In the field of health losses resulting from failure to establish the facilities in a suitable location and the required number, beyond the cost and quality of service will result in an increase in mortality and the spread of diseases. So the facility location models have special importance in this area. In this paper, a successively inclusive hierarchical model for location of health centers in term of the transfer of patients from a lower level to a higher level of health centers has been developed. Since determination the exact number of demand for health care in the future is difficult and in order to make the model close to the real conditions of demand uncertainty, a fuzzy programming model based on credibility theory is considered. To evaluate the proposed model, several numerical examples are solved in small size. In order to solve large scale problems, a meta-heuristic algorithm based on harmony search algorithm was developed in conjunction with the GAMS software which indicants the performance of the proposed algorithm.

  6. Evaluation of the location and recency of faulting near prospective surface facilities in Midway Valley, Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Swan, F.H.; Wesling, J.R.; Angell, M.M.; Thomas, A.P.; Whitney, J.W.; Gibson, J.D.

    2002-01-17

    Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern

  7. Evaluation of the location and recency of faulting near prospective surface facilities in Midway Valley, Nye County, Nevada

    International Nuclear Information System (INIS)

    Swan, F.H.; Wesling, J.R.; Angell, M.M.; Thomas, A.P.; Whitney, J.W.; Gibson, J.D.

    2002-01-01

    Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern

  8. Evaluation of the Location and Recency of Faulting Near Prospective Surface Facilities in Midway Valley, Nye County, Nevada

    Science.gov (United States)

    Swan, F.H.; Wesling, J.R.; Angell, M.M.; Thomas, A.P.; Whitney, J.W.; Gibson, J.D.

    2001-01-01

    Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern

  9. Location and repair of air leaks in the ATF [Advanced Toroidal Facility] vacuum vessel

    International Nuclear Information System (INIS)

    Schwenterly, S.W.; Gabbard, W.A.; Schaich, C.R.; Yarber, J.L.

    1989-01-01

    On the basis of partial pressure rate-of-rise and base pressure measurements, it was determined that the Advanced Toroidal Facility (ATF) vacuum vessel had an air leak in the low 10 -4 mbar-ell/s range. Pinpointing this leak by conventional helium leak-checking procedures was not possible, because large portions of the outside of the vessel are covered by the helcial field coils and a structural shell. Various alternative leak-detection schemes that were considered are summarized and their advantages and disadvantages noted. In the method ultimately employed, gun-rubber patches of various sizes ranging from 12.7 by 12.7 cm to 20.3 by 30.5 cm were positioned on the inside surfaces of the vessel and evacuated by the leak detector (LD). After roughly 5% of the surface was inspected in this way, a leak of > 10 -5 mbar-ell/s was discovered and localized to an area of 5 by 5 cm. Dye penetrant applied to this area disclosed three pinholes. Two small slag pockets were discovered while these points were being ground out. After these were rewelded, no furthered leakage could be found in the repaired area. Global leak rates measured after the machine was reevacuated indicated that this leak was about 30% of the overall leak rate. 1 ref., 5 figs., 1 tab

  10. Asbestos related diseases among workers of asbestos processing plants in relation to type of production and asbestos use.

    Science.gov (United States)

    Szeszenia-Dąbrowska, Neonila; Świątkowska, Beata; Sobala, Wojciech; Szubert, Zuzanna; Wilczyńska, Urszula

    2015-01-01

    Asbestos dust is one of the most dangerous pneumoconiotic and carcinogenic agents. The aim of this study was to assess the occurrence of asbestosis and pleural mesothelioma, depending on asbestos consumption and the type of manufactured products, among former asbestos workers in Poland. The study subjects included employees of 18 large state-owned asbestos processing enterprises operating in the Polish market in 1945-1998. The study is based on data obtained from asbestos company records and the Central Register of Occupational Diseases data on the cases of asbestosis and mesothelioma for the period from 1970 till 2012 as well as data from Amiantus Programme. The analysis was performed for 5 sectors comprising plants classified according to the products manufactured and applied production technology. In the study period, 2160 cases of asbestosis and 138 cases of mesothelioma were reported. The plants processed a total of about 2 million tons of asbestos, including about 7.5% of crocidolite. Total asbestosis consumption was a strong predictor of the rate of asbestosis incidence (R2 = 0.68, p = 0.055). The highest risk occurrence of asbestosis was observed in the production of textiles and sealing products. Mesothelioma occurred only in plants where crocidolite had been ever processed. Total asbestos consumption was a strong predictor of the rate of asbestosis incidence. The observation confirms the relationship between exposure to crocidolite and the occurrence of mesothelioma, regardless of the manufactured products, and suggests the absence of such a link for the total volume of asbestos consumption.

  11. Assessing asbestos exposure potential in nonindustrial settings.

    Science.gov (United States)

    Chang, S N; White, L E; Scott, W D

    1987-01-01

    The presence of asbestos containing materials (ACM) in office and commercial buildings is a significant environmental problem. Asbestosis, mesothelioma and lung cancer have been linked with industrial exposure to airborne asbestos. The extensive use of asbestos products in buildings has raised concerns about the widespread exposure of the general public to asbestos in nonoccupational settings. The presence of asbestos in a building does not necessarily mean that significant exposure of the occupants of the building has occurred, but it is important that the asbestos be monitored regularly to ensure that fibers do not become airborne. If ACM are contained within a matrix and not disturbed, exposure is unlikely. However, if the asbestos becomes friable (crumbling) or if building maintenance, repair, renovation or other activities disturb ACM, airborne asbestos fibers may be a source of exposure to the occupants of the building. Currently, asbestos exposure assessment is conducted by a phase contrast light microscope (PCM) technique. Due to its inherent limitation in resolution and the generic counting rules used, analysis by the PCM method underestimates the airborne asbestos fiber concentration as compared to analysis by transmission electron microscopy (TEM). It is important that the air monitoring results analyzed by PCM be interpreted carefully in conjunction with a survey by a professional to judge the physical condition of the ACM in buildings. Exposure levels to airborne asbestos fibers vary from day to day and depend on the physical condition of the material involved and the type of operating and maintenance program in place.(ABSTRACT TRUNCATED AT 250 WORDS)

  12. Prevention of Asbestos-Related Disease in Countries Currently Using Asbestos

    Directory of Open Access Journals (Sweden)

    Daniela Marsili

    2016-05-01

    Full Text Available More than 40 years of evaluation have consistently confirmed the carcinogenicity of asbestos in all of its forms. This notwithstanding, according to recent figures, the annual world production of asbestos is approximatively 2,000,000 tons. Currently, about 90% of world asbestos comes from four countries: Russia, China, Brazil and Kazakhstan; and the wide use of asbestos worldwide represents a global threat. The purpose of this paper is to present a review of the asbestos health impact and to discuss the role of epidemiological investigations in countries where asbestos is still used. In these contexts, new, “local” studies can stimulate awareness of the size of the problem by public opinion and other stakeholders and provide important information on the circumstances of exposure, as well as local asbestos-related health impacts. This paper suggests an agenda for an international cooperation framework dedicated to foster a public health response to asbestos, including: new epidemiological studies for assessing the health impact of asbestos in specific contexts; socio-cultural and economic analyses for contributing to identifying stakeholders and to address both the local and global implications of asbestos diffusion; public awareness on the health and socio-economic impact of asbestos use and banning.

  13. Asbestos and Asbestosis. LC Science Tracer Bullet.

    Science.gov (United States)

    Alderson, Karen L., Comp.

    Asbestos is a naturally occurring mineral found in several forms and because of its temperature-resisting properties, flexibility, and strength, it was widely used in the construction industry, automobile industry, and textile industry. Asbestos becomes dangerous when it crumbles and breaks releasing fibers that can cause asbestosis and certain…

  14. [Screening for asbestos-related conditions

    DEFF Research Database (Denmark)

    Brauer, C.; Baandrup, U.; Jacobsen, P.

    2009-01-01

    in asbestos-exposed populations. Data do not currently support implementation of screening programs for asbestos-exposed persons in Denmark. Since mesothelioma is most often an occupational disease, these patients should be admitted to an occupational clinic for aetiological evaluation Udgivelsesdato: 2009/2/2...

  15. Asbestos-related diseases in automobile mechanics

    Science.gov (United States)

    Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

    2012-01-01

    Purpose Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyze the frequency of pleural and parenchymal abnormalities on HRCT in a population of automobile mechanics. Methods The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos–related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers, with further consensus in the case of disagreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Results Pleural plaques were observed in 5 cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in 1 case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. Conclusions The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers. PMID:21965465

  16. Location, location, location

    NARCIS (Netherlands)

    Anderson, S.P.; Goeree, J.K.; Ramer, R.

    1997-01-01

    We analyze the canonical location-then-price duopoly game with general log- concave consumer densities. A unique pure-strategy equilibrium to the two-stage game exists if the density is not "too asymmetric" and not "too concave." These criteria are satisfied by many commonly used densities.

  17. Exposure to chrysotile asbestos associated with unpacking and repacking boxes of automobile brake pads and shoes.

    Science.gov (United States)

    Madl, A K; Scott, L L; Murbach, D M; Fehling, K A; Finley, B L; Paustenbach, D J

    2008-08-01

    Industrial hygiene surveys and epidemiologic studies of auto mechanics have shown that these workers are not at an increased risk of asbestos-related disease; however, concerns continue to be raised regarding asbestos exposure from asbestos-containing brakes. Handling new asbestos-containing brake components has recently been suggested as a potential source of asbestos exposure. A simulation study involving the unpacking and repacking of 105 boxes of brakes (for vehicles ca. 1946-80), including 62 boxes of brake pads and 43 boxes of brake shoes, was conducted to examine how this activity might contribute to both short-term and 8-h time-weighted average exposures to asbestos. Breathing zone samples on the lapel of a volunteer worker (n = 80) and area samples at bystander (e.g., 1.5 m from worker) (n = 56), remote area (n = 26) and ambient (n = 10) locations collected during the unpacking and repacking of boxes of asbestos-containing brakes were analyzed by phase contrast microscopy and transmission electron microscopy. Exposure to airborne asbestos was characterized for a variety of parameters including the number of boxes handled, brake type (i.e. pads versus shoes) and the distance from the activity (i.e. worker, bystander and remote area). This study also evaluated the fiber size and morphology distribution according to the International Organization for Standardization analytical method for asbestos. It was observed that (i) airborne asbestos concentrations increased with the number of boxes unpacked and repacked, (ii) handling boxes of brake pads resulted in higher worker asbestos exposures compared to handling boxes of brake shoes, (iii) cleanup and clothes-handling tasks produced less airborne asbestos than handling boxes of brakes and (iv) fiber size and morphology analysis showed that while the majority of fibers were free (e.g. not associated with a cluster or matrix), 20 microm length) considered to pose the greatest risk of asbestos-related disease. It

  18. Asbestos-related pleuropulmonary diseases: iconographic essay

    International Nuclear Information System (INIS)

    Gustavo de Souza Portes Meirelles; Rodrigues, Reynaldo Tavares; Nery, Luiz Eduardo

    2007-01-01

    The aim of this study is to illustrate the main imaging findings of asbestos-related diseases. Pleural and pulmonary asbestos-related diseases range from benign conditions, like pleural effusion and pleural plaques, to some neoplasias, such as lung cancer and malignant mesothelioma. Pleural effusion is the earliest finding after asbestos exposure, but the imaging findings are not specific. Diffuse pleural thickening involves the visceral pleura and pleural plaques are considered to be hallmarks of exposure. Asbestosis is the pulmonary fibrosis due to asbestos. Rounded atelectasis is a peripheral lung collapse in these individuals, generally related to pleural disease. Some neoplasias, like lung carcinoma and pleural mesothelioma, are more prevalent in asbestos-exposed subjects. (author)

  19. Factors Associated With Non-compliance of Asbestos Occupational Standards in Brake Repair Workers.

    Science.gov (United States)

    Cely-García, María Fernanda; Curriero, Frank C; Giraldo, Margarita; Méndez, Lorena; Breysse, Patrick N; Durán, Mauricio; Torres-Duque, Carlos A; González-García, Mauricio; Pérez, Carolina; Parada, Patricia; Ramos-Bonilla, Juan Pablo

    2016-10-01

    Asbestos and non-asbestos containing brake products are currently used in low- and middle-income countries like Colombia. Because brake products are distributed detached from their supports, they require manipulation before installation, which release fibers and expose workers. Previous studies of our research group have documented exposures in excess of the widely accepted 0.1 f/cm(3) exposure guideline. The aim of this study is to identify factors associated with non-compliance of the 8-h time weighted average (TWA) 0.1 f/cm(3) asbestos occupational limit among brake mechanics (i.e. riveters). Eighteen brake repair shops (BRS) located in Bogotá (Colombia) were sampled during 3 to 6 consecutive days for the entire work-shift. Personal and short-term personal samples were collected following NIOSH methods 7400 and 7402. Longitudinal based logistic regression models were used to determine the association between the odds of exceeding the 8-h TWA 0.1 f/cm(3) asbestos occupational limit and variables such as type of tasks performed by workers, workload (number of products manipulated daily), years of experience as riveters, and shop characteristics. These models can be used to estimate the odds of being currently or historically overexposed when sampling data do not exist. Since the information required to run the models can vary for both retrospective and current asbestos occupational exposure studies, three models were constructed with different information requirements. The first model evaluated the association between the odds of non-compliance with variables related to the workload, the second model evaluated the association between the odds of non-compliance with variables related to the manipulation tasks, and the third model evaluated the association between the odds of non-compliance with variables related with both the type of tasks performed by workers and the workload. Variables associated with the odds of non-compliance included conducting at least one

  20. 40 CFR 61.142 - Standard for asbestos mills.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standard for asbestos mills. 61.142... § 61.142 Standard for asbestos mills. (a) Each owner or operator of an asbestos mill shall either discharge no visible emissions to the outside air from that asbestos mill, including fugitive sources, or...

  1. Asbestos and Asbestos-related Diseases in Vietnam: In reference to the International Labor Organization/World Health Organization National Asbestos Profile

    Directory of Open Access Journals (Sweden)

    Van Hai Pham

    2013-06-01

    Full Text Available This paper describes progress on formulating a national asbestos profile for the country of Vietnam. The Center of Asbestos Resource, Vietnam, formulated a National Profile on Asbestos-related Occupational Health, with due reference to the International Labor Organization/World Health Organization National Asbestos Profile. The Center of Asbestos Resource was established by the Vietnamese Health Environment Management Agency and the National Institute of Labor Protection, with the support of the Australian Agency for International Development, as a coordinating point for asbestos-related issues in Vietnam. Under the National Profile on Asbestos-related Occupational Health framework, the Center of Asbestos Resource succeeded in compiling relevant information for 15 of the 18 designated items outlined in the International Labor Organization/World Health Organization National Asbestos Profile, some overlaps of the information items notwithstanding. Today, Vietnam continues to import and use an average of more than 60,000 metric tons of raw asbestos per year. Information on asbestos-related diseases is limited, but the country has begun to diagnose mesothelioma cases, with the technical cooperation of Japan. As it stands, the National Profile on Asbestos-related Occupational Health needs further work and updating. However, we envisage that the National Profile on Asbestos-related Occupational Health will ultimately facilitate the smooth transition to an asbestos-free Vietnam.

  2. Prisons and Correctional Facilities, Located during MicroData field address collection 2004-2006. Kept in Spillman database for retrieval., Published in 2004, Vilas County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Prisons and Correctional Facilities dataset current as of 2004. Located during MicroData field address collection 2004-2006. Kept in Spillman database for retrieval..

  3. Industrial Manufacturing Facilities, Located during MicroData field address collection 2004-2006. Kept in Spillman database for retrieval., Published in 2004, Vilas County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Industrial Manufacturing Facilities dataset current as of 2004. Located during MicroData field address collection 2004-2006. Kept in Spillman database for retrieval..

  4. Executive Order 12898 and Social, Economic, and Sociopolitical Factors Influencing Toxic Release Inventory Facility Location in EPA Region 6: A Multi-Scale Spatial Assessment of Environmental Justice

    Science.gov (United States)

    Moore, Andrea Lisa

    2013-01-01

    Toxic Release Inventory facilities are among the many environmental hazards shown to create environmental inequities in the United States. This project examined four factors associated with Toxic Release Inventory, specifically, manufacturing facility location at multiple spatial scales using spatial analysis techniques (i.e., O-ring statistic and…

  5. BOA: Asbestos Pipe-Insulation Abatement Robot System

    International Nuclear Information System (INIS)

    Schempf, H.

    1996-01-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  6. BOA: Pipe-asbestos insulation removal robot system

    Energy Technology Data Exchange (ETDEWEB)

    Schempf, H.; Bares, J.; Schnorr, W. [Carnegie Mellon Univ., Pittsburgh, PA (United States)

    1995-10-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee.

  7. BOA: Pipe-asbestos insulation removal robot system

    International Nuclear Information System (INIS)

    Schempf, H.; Bares, J.; Schnorr, W.

    1995-01-01

    The BOA system is a mobile pipe-external robotic crawler used to remotely strip and bag asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations. Steam and process lines within the DOE weapons complex warrant the use of a remote device due to the high labor costs and high level of radioactive contamination, making manual removal extremely costly and highly inefficient. Currently targeted facilities for demonstration and remediation are Fernald in Ohio and Oak Ridge in Tennessee

  8. Remediation of asbestos in soil

    International Nuclear Information System (INIS)

    McFarland, Ross; Dangerfield, David

    2012-01-01

    The former Patea Freezing Works in the Tarankai region of New Zealand began as a canning plant and tallow factory in the late 1800s. Freezing technology was introduced in 1904 and was in continuous operation until 1982. Some of the structures were destroyed by fire in 2008, leaving metal, ash and asbestos. Fragments of Asbestos Containing Material (ACM) were blown over the local town and a large area of the site. A remedial strategy was developed by Aecom and they also provided validation services. . The preferred option was to remove the top layer of ACM impacted soil and place it in an engineered containment cell on site. However this process could not be used due to local cultural objections, and the 'dig and dump' option was adopted. The Western Australian Department of Health (DOH) Guidelines, May 2009, were used in collaboration with local district New Zealand Councils. Monitoring wells were installed, however the monitoring program is not yet underway as the revegetation program is not complete.

  9. Asbestos in toys: an exemplary case.

    Science.gov (United States)

    Silvestri, Stefano; Di Benedetto, Francesco; Raffaell, Corrado; Veraldi, Angela

    2016-01-01

    DAS was an artificial clay which, once molded, hardened at room temperature. It was largely used as a toy between 1963 and 1975 in Italy, Netherlands, Germany, UK and Norway. This case report describes and reports the presence of asbestos in DAS. We investigated the presence of asbestos in DAS using light and electron microscopy on samples of the original material. We searched administrative documents at the State Archive of Turin and conducted interviews with past employees on annual production, suppliers, and purchasers. The analytical tests confirmed the presence of asbestos fibers in DAS: about 30% of its composition. The documents found at the State Archive confirmed the annual purchase of hundreds tons of raw asbestos from the Amiantifera di Balangero, the Italian asbestos mine. DAS was found to be used also within craftsmanship. Asbestos fibers in DAS may have caused exposure to production workers and a variety of users, including artists, teachers, and children. Over 13 years, about 55 million packs of DAS were produced and sold. The number of users is difficult to estimate but may have been in the order of millions. In Italy, a specific question on the use of DAS has been included in a routinely used mesothelioma questionnaire. As DAS was exported to other countries, our findings suggest that mesothelioma patients should be asked about their past use of DAS, in particular individuals not reporting a clear past asbestos exposure. Additionally, this discovery shows the incompleteness of records on asbestos uses and suggests to test items, including toys, imported from countries where asbestos is not forbidden.

  10. Assessment of LANL asbestos waste management documentation

    International Nuclear Information System (INIS)

    Davis, K.D.; Hoevemeyer, S.S.; Stirrup, T.S.; Jennrich, E.A.; Lund, D.M.

    1991-04-01

    The intent of this effort is to evaluate the Los Alamos National Laboratory (LANL) Waste Acceptance Criteria (WAC) for asbestos to determine if it meets applicable DOE, EPA, and OSHA requirements. There are numerous regulations that provide specific guidelines on the management of asbestos waste. An annotated outline for a generic asbestos WAC was developed using the type of information specified by 5820.2A. The outline itself is included in Appendix A. The major elements that should be addressed by the WAC were determined to be as follows: Waste Forms; Waste Content/Concentration; Waste Packaging; and Waste Documentation/Certification

  11. 40 CFR 427.30 - Applicability; description of the asbestos paper (starch binder) subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos paper (starch binder) subcategory. 427.30 Section 427.30 Protection of Environment ENVIRONMENTAL... Asbestos Paper (Starch Binder) Subcategory § 427.30 Applicability; description of the asbestos paper... asbestos paper (starch binder). ...

  12. 40 CFR 427.70 - Applicability; description of the asbestos floor tile subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos floor tile subcategory. 427.70 Section 427.70 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos Floor Tile Subcategory § 427.70 Applicability; description of the asbestos floor tile subcategory... manufacture of asbestos floor tile. ...

  13. Current Best Practices for Preventing Asbestos Exposure Among Brake and Clutch Repair Workers

    Science.gov (United States)

    Covers concerns about asbestos exposure for mechanics, how to tell if asbestos brake or clutch components contain asbestos, work practices to follow, protecting yourself for home mechanics, disposal of waste that contains asbestos.

  14. Solving the competitive facility location problem considering the reactions of competitor with a hybrid algorithm including Tabu Search and exact method

    Science.gov (United States)

    Bagherinejad, Jafar; Niknam, Azar

    2018-03-01

    In this paper, a leader-follower competitive facility location problem considering the reactions of the competitors is studied. A model for locating new facilities and determining levels of quality for the facilities of the leader firm is proposed. Moreover, changes in the location and quality of existing facilities in a competitive market where a competitor offers the same goods or services are taken into account. The competitor could react by opening new facilities, closing existing ones, and adjusting the quality levels of its existing facilities. The market share, captured by each facility, depends on its distance to customer and its quality that is calculated based on the probabilistic Huff's model. Each firm aims to maximize its profit subject to constraints on quality levels and budget of setting up new facilities. This problem is formulated as a bi-level mixed integer non-linear model. The model is solved using a combination of Tabu Search with an exact method. The performance of the proposed algorithm is compared with an upper bound that is achieved by applying Karush-Kuhn-Tucker conditions. Computational results show that our algorithm finds near the upper bound solutions in a reasonable time.

  15. Environmental exposure to asbestos: from geology to mesothelioma.

    Science.gov (United States)

    Bayram, Mehmet; Bakan, Nur Dilek

    2014-05-01

    This article aims to review the geological background of environmental asbestos exposure and the distribution of asbestos-related disease (ARD) in association with naturally occurring asbestos (NOA), and discusses the potential health risks associated with exposure to non-occupational asbestos. With the motion of continental and oceanic plates, in some parts of the world serpentinites in the lower layer of the oceanic plate move into the continental plate and form the so-called ophiolites. Ophiolites consist of soil and rocks containing serpentine-type asbestos. There is an increase in ARDs in regions close to ophiolites. Indoor exposure and outdoor exposure to NOA, outdoor exposure to industrial asbestos and mines, urbanization and construction works in NOA regions are the known sources and types of environmental asbestos exposure. Although there is an expectance of decline in ARDs caused by industrial exposure to asbestos, the environmental exposure to asbestos is still a challenge waiting to be overcome.

  16. Asbestos free friction composition for brake linings

    Indian Academy of Sciences (India)

    WINTEC

    Abstract. An asbestos free friction material composite for brake linings is synthesized containing fibrous re- inforcing ... every manufacturer of automotive friction materials uses phenolics as ... The resin binder is a critical compo- nent. The limits ...

  17. Asbestos-Containing Materials (ACM) and Demolition

    Science.gov (United States)

    There are specific federal regulatory requirements that require the identification of asbestos-containing materials (ACM) in many of the residential buildings that are being demolished or renovated by a municipality.

  18. Asbestos Standard for the Construction Industry

    National Research Council Canada - National Science Library

    1995-01-01

    .... In the construction industry, asbestos is found in installed products such as shingles, floor tiles, cement pipe and sheet, roofing felts, insulation, ceiling tiles, fire-resistant drywall, and acoustical products...

  19. Asbestos in seashore Southern area of Bari

    International Nuclear Information System (INIS)

    Giua, R.; Bonanno, V.; Gagliardi, N.

    2006-01-01

    Bari seashore was place, in the past, of uncontrolled waste disposal. The importance of such situation became evident when Bari Municipal Administration attempted the recovery of Torre Quetta beach. Sampling and analysis in the area showed the presence of quantities of asbestos residues probably coming from Fibronit, an asbestos-cement industry in Bari closed since 1985 and, at present, polluted site of national relevance [it

  20. Asbestos-related diffuse pleural thickening.

    Science.gov (United States)

    Fujimoto, Nobukazu; Kato, Katsuya; Usami, Ikuji; Sakai, Fumikazu; Tokuyama, Takeshi; Hayashi, Seiji; Miyamoto, Kenji; Kishimoto, Takumi

    2014-01-01

    The clinical features of asbestos-related diffuse pleural thickening (DPT) remain unclear. To clarify the association between radiological findings of DPT and respiratory function. Medical data from patients with asbestos-related DPT were collected, including their history of occupational or neighborhood asbestos exposure, initial symptoms, modified Medical Research Council dyspnea grade, smoking history, radiological findings, and respiratory function test results. There were 106 DPT patients between 2005 and 2010 [i.e. 103 men (97.2%) and 3 women (2.8%)]. The median age at diagnosis was 69 years (range 46-88). Patient occupations related to asbestos exposure included: asbestos product manufacturing (n = 17); the shipbuilding industry (n = 14); the construction industry (n = 13); heat insulation work (n = 12); plumbing, asbestos spraying, and electrical work (n = 7 each), and transportation and demolition work (n = 4 each). The median duration of asbestos exposure was 25 years (range 2-54), and the median latency period before the onset of DPT was 46 years (range 25-66). Involvement of the costophrenic angle (CPA) was also negatively correlated with the percent vital capacity (%VC; r = -0.448, p < 0.01). Pleural thickness and the craniocaudal and horizontal extension of pleural thickening, as determined by chest computed tomography (CT), were also negatively correlated with %VC (r = -0.226, p < 0.05; r = -0.409, p < 0.01, and r = -0.408, p < 0.01, respectively). DPT develops after a long latency period following occupational asbestos exposure and causes marked respiratory dysfunction. The extension of DPT should be evaluated by chest CT, and chest X-ray would be important for the evaluation of the involvement of the CPA.

  1. ILO to promote global asbestos ban.

    Science.gov (United States)

    O'Neill, Rory

    2006-01-01

    The International Labour Office (ILO) is to pursue a global ban on asbestos, the world's biggest ever industrial killer. The landmark decision came with the adoption of a resolution on 14 June 2006 at the ILO conference in Geneva and followed a high level union campaign. Rory O'Neill asked Jukka Takala, director of ILO's Safe Work program, what ILO will now do to help make the world asbestos-free.

  2. Spectroscopic and x-ray diffraction analyses of asbestos in the World Trade Center dust:

    Science.gov (United States)

    Swayze, Gregg A.; Clark, Roger N.; Sutley, Stephen J.; Hoefen, Todd M.; Plumlee, Geoffrey S.; Meeker, Gregory P.; Brownfield, Isabelle; Livo, Keith E.; Morath, Laurie C.

    2009-01-01

    On September 17 and 18, 2001, samples of settled dust and airfall debris were collected from 34 sites within a 1-km radius of the WTC collapse site, including a sample from an indoor location unaffected by rainfall, and samples of insulation from two steel beams at Ground Zero. Laboratory spectral and x-ray diffraction analyses of the field samples detected trace levels of serpentine minerals, including chrysotile asbestos, in about two-thirds of the dust samples at concentrations at or below ~1 wt%. One sample of a beam coating material contained up to 20 wt% chrysotile asbestos. Analyses indicate that trace levels of chrysotile were distributed with the dust radially to distances greater than 0.75 km from Ground Zero. The chrysotile content of the dust is variable and may indicate that chrysotile asbestos was not distributed uniformly during the three collapse events.

  3. Asbestos exposure of building maintenance personnel.

    Science.gov (United States)

    Mlynarek, S; Corn, M; Blake, C

    1996-06-01

    The exposures of building maintenance personnel and occupants to airborne asbestos fibers, and the effects of operations and maintenance programs on those exposures, continue to be an important public health issue. The subject of this investigation was a large metropolitan county with numerous public buildings which routinely conducted air sampling for asbestos. A total of 302 personal air samples in nine task categories collected during maintenance worker activities in proximity to asbestos-containing materials were analyzed; 102 environmental air samples in four task categories were also analyzed. The arithmetic means of the 8-hr time weighted average exposures for personal sampling for each task category were all below the Occupational Safety and Health Administration permissible exposure level of 0.1 fibers (f)/cc > 5 microm. The highest mean 8-hr time weighted average exposure was 0.030 f/cc > 5 microm for ceiling tile replacement. The maximum asbestos concentration during sample collection for environmental samples was 0.027 f/cc > 5 microm. All asbestos-related maintenance work was done within the framework of an Operations and Maintenance Program (OMP) which utilized both personal protective equipment and controls against fiber release/dispersion. Results are presented in association with specific OMP procedures or controls. These results support the effectiveness of using Operations and Maintenance Programs to manage asbestos in buildings without incurring unacceptable risk to maintenance workers performing maintenance tasks.

  4. Human health risks associated with asbestos abatement.

    Science.gov (United States)

    Chrostowski, P C; Foster, S A; Anderson, E L

    1991-09-01

    Upperbound lifetime excess cancer risks were calculated for activities associated with asbestos abatement using a risk assessment framework developed for EPA's Superfund program. It was found that removals were associated with cancer risks to workers which were often greater than the commonly accepted cancer risk of 1 x 10(-6), although lower than occupational exposure limits associated with risks of 1 x 10(-3). Removals had little effect in reducing risk to school populations. Risks to teachers and students in school buildings containing asbestos were approximately the same as risks associated with exposure to ambient asbestos by the general public and were below the levels typically of concern to regulatory agencies. During abatement, however, there were increased risks to both workers and nearby individuals. Careless, everyday building maintenance generated the greatest risk to workers followed by removals and encapsulation. If asbestos abatement was judged by the risk criteria applied to EPA's Superfund program, the no-action alternative would likely be selected in preference to removal in a majority of cases. These conclusions should only be interpreted within the context of an overall asbestos risk management program, which includes consideration of specific fiber types and sizes, sampling and analytical limitations, physical condition of asbestos-containing material, episodic peak exposures, and the number of people potentially exposed.

  5. Asbestos: the measures taken by CERN

    CERN Multimedia

    2005-01-01

    Recently, the Canton's Department for Installation, Equipment, and Housing launched a survey into the presence of asbestos in buildings built in Geneva before 1991. Their initial findings have caused some concern to the public, with buildings and landmarks such as the TSR Tower, the Temple de la Madeleine, and the Cathedral of Saint-Pierre all found to contain asbestos. Several employees here also contacted the Bulletin to find out more about CERN's approach in dealing with asbestos. In the 1960s, asbestos' use was widespread. Its low cost and attractive properties made it a popular choice for insulating buildings. It was used in buildings throughout the world, including many at CERN. However, since the 1970s the use of asbestos has been gradually limited. In France, the first specific rules for the protection of workers came about in 1977. Since then, its use was limited more and more, under pressure from European directives. Finally, a European directive in 1999 widened the ban on asbestos. It covered ...

  6. The Case for a Global Ban on Asbestos

    Science.gov (United States)

    LaDou, Joseph; Castleman, Barry; Frank, Arthur; Gochfeld, Michael; Greenberg, Morris; Huff, James; Joshi, Tushar Kant; Landrigan, Philip J.; Lemen, Richard; Myers, Jonny; Soffritti, Morando; Soskolne, Colin L.; Takahashi, Ken; Teitelbaum, Daniel; Terracini, Benedetto; Watterson, Andrew

    2010-01-01

    Background All forms of asbestos are now banned in 52 countries. Safer products have replaced many materials that once were made with it. Nonetheless, many countries still use, import, and export asbestos and asbestos-containing products, and in those that have banned other forms of asbestos, the so-called “controlled use” of chrysotile asbestos is often exempted from the ban. In fact, chrysotile has accounted for > 95% of all the asbestos used globally. Objective We examined and evaluated the literature used to support the exemption of chrysotile asbestos from the ban and how its exemption reflects the political and economic influence of the asbestos mining and manufacturing industry. Discussion All forms of asbestos, including chrysotile, are proven human carcinogens. All forms cause malignant mesothelioma and lung and laryngeal cancers, and may cause ovarian, gastrointestinal, and other cancers. No exposure to asbestos is without risk. Illnesses and deaths from asbestos exposure are entirely preventable. Conclusions All countries of the world have an obligation to their citizens to join in the international endeavor to ban the mining, manufacture, and use of all forms of asbestos. An international ban is urgently needed. There is no medical or scientific basis to exempt chrysotile from the worldwide ban of asbestos. PMID:20601329

  7. The effect of location and facility demand on the marginal cost of delivered wood chips from energy crops: A case study of the state of Tennessee

    International Nuclear Information System (INIS)

    Graham, R.L.; Liu, W.; Downing, M.; Noon, C.; Daly, M.; Moore, A.

    1995-01-01

    Cost-supply curves for delivered wood chips from short rotation woody crops were calculated for 21 regularly-spaced locations spanning the state of Tennessee. These curves were used to systematically evaluate the combined effects of location and facility demand on wood chip feedstock costs in Tennessee. The cost-supply curves were developed using BRAVO, a GIS-based decision support system which calculates marginal cost of delivering wood chips to a specific location given road network maps and maps of farmgate prices and supplies of woody chips from short rotation energy crops. Marginal costs of delivered chips varied by both facility location in the state and facility demand. Marginal costs were lowest in central Tennessee unless the facility demand was greater than 2.7 million dry Mg per year (3 million dry tons per year) in which case west Tennessee was the lowest cost region. Marginal costs rose rapidly with increasing facility demand in the mountainous eastern portion of the state. Transportation costs accounted for 18 to 29% of the delivered cost and ranged between $8 and $18/dry Mg ($7 and $16/dry ton). Reducing the expected farmer participation rate from 100% to 50% or 25% dramatically raised the marginal costs of feedstock supply in the east and central regions of the state. The analysis demonstrates the need to use geographically-specific information when projecting the potential costs and supplies of biomass feedstock

  8. History of Asbestos Ban in Hong Kong

    Directory of Open Access Journals (Sweden)

    Chun-Kwan Wong

    2017-10-01

    Full Text Available As millions of immigrants moved to Hong Kong (HK from China in the recent decades, large amount of residential housings were built in the early years and a substantial proportion of those buildings used asbestos-containing materials (ACMs. Since the number of new cases of ARDs diagnosed has increased year by year since 1990’s, the remarkable increase of incidences had drawn the attention of the public and most importantly the HK government. It became one of the trigger points leading to asbestos ban in HK history. Comparatively, non-governmental organizations (NGOs, labor unions and patients’ self-help organizations demonstrated a more aggressive and proactive attitude than the HK government and have played a key role in the development of asbestos banning policy in HK. After numerous petitions and meetings with the government representatives by those parties in the past decade, the HK government eventually changed its attitude and started to consider terminating the endless threat from asbestos by amending the policy, and the new clause of legislation for banning of all forms of asbestos was enacted on 4 April 2014. Other than the restriction of asbestos use, the compensation system about ARDs has also made some great moves by the effort of those parties as well. Based on the experience we learnt through the years, efforts from different stakeholders including patients’ self-help organizations, NGOs, legislative councilors, and media power are absolutely essential to the success of progression and development in today’s asbestos banning in HK.

  9. Synchrotron soft X-ray imaging and fluorescence microscopy reveal novel features of asbestos body morphology and composition in human lung tissues

    Directory of Open Access Journals (Sweden)

    Polentarutti Maurizio

    2011-02-01

    Full Text Available Abstract Background Occupational or environmental exposure to asbestos fibres is associated with pleural and parenchymal lung diseases. A histopathologic hallmark of exposure to asbestos is the presence in lung parenchyma of the so-called asbestos bodies. They are the final product of biomineralization processes resulting in deposition of endogenous iron and organic matter (mainly proteins around the inhaled asbestos fibres. For shedding light on the formation mechanisms of asbestos bodies it is of fundamental importance to characterize at the same length scales not only their structural morphology and chemical composition but also to correlate them to the possible alterations in the local composition of the surrounding tissues. Here we report the first correlative morphological and chemical characterization of untreated paraffinated histological lung tissue samples with asbestos bodies by means of soft X-ray imaging and X-Ray Fluorescence (XRF microscopy, which reveals new features in the elemental lateral distribution. Results The X-ray absorption and phase contrast images and the simultaneously monitored XRF maps of tissue samples have revealed the location, distribution and elemental composition of asbestos bodies and associated nanometric structures. The observed specific morphology and differences in the local Si, Fe, O and Mg content provide distinct fingerprints characteristic for the core asbestos fibre and the ferruginous body. The highest Si content is found in the asbestos fibre, while the shell and ferruginous bodies are characterized by strongly increased content of Mg, Fe and O compared to the adjacent tissue. The XRF and SEM-EDX analyses of the extracted asbestos bodies confirmed an enhanced Mg deposition in the organic asbestos coating. Conclusions The present report demonstrates the potential of the advanced synchrotron-based X-ray imaging and microspectroscopy techniques for studying the response of the lung tissue to the

  10. Summary environmental site assessment report for the U.S. Department of Energy Oxnard Facility, Oxnard, California

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    This report summarizes the investigations conducted by Rust Geotech at the U.S. Department of Energy (DOE) Oxnard facility, 1235 East Wooley Road, Oxnard, California. These investigations were designed to locate, identify, and characterize any regulated contaminated media on the site. The effort included site visits; research of ownership, historical uses of the Oxnard facility and adjacent properties, incidences of and investigations for contaminants on adjacent properties, and the physical setting of the site; sampling and analysis; and reporting. These investigations identified two friable asbestos gaskets on the site, which were removed, and nonfriable asbestos, which will be managed through the implementation of an asbestos management plan. The California primary drinking water standards were exceeded for aluminum on two groundwater samples and for lead in one sample collected from the shallow aquifer underlying the site; remediation of the groundwater in this aquifer is not warranted because it is not used. Treated water is available from a municipal water system. Three sludge samples indicated elevated heavy metals concentrations; the sludge must be handled as a hazardous waste if disposed. Polychlorinated biphenyls (PCBs) were detected at concentrations below remediation criteria in facility soils at two locations. In accordance with U.S. Environmental Protection Agency (EPA) and State of California guidance, remediation of the PCBs is not required. No other hazardous substances were detected in concentrations exceeding regulatory limits.

  11. Asbestos: A Lingering Danger. AIO Red Paper #20.

    Science.gov (United States)

    Malcolm, Stuart

    Its unique qualities makes asbestos extremely useful in industry, yet it is termed one of the most dangerous and insidious substances in the work place. Composed of mostly fibers, asbestos is readily freed into the atmosphere during handling, constituting a real health risk. There are two ways asbestos can enter the human body: by inhalation or…

  12. Exposure to asbestos in patients with malignant mesothelioma in Iran

    Directory of Open Access Journals (Sweden)

    Gholamreza Pouryaghoub

    2014-05-01

    Conclusion: The results of our study specified the jobs with high risks of exposure to asbestos and approved the relationship between the exposure to asbestos and the inci-dence of mesothelioma in Iran, according to researches in other countries. So the con-sumption of asbestos in Iran, like 20 other countries in the world is necessary to be banned.

  13. Asbestos induced oxidative injury to DNA.

    Science.gov (United States)

    Mahmood, N; Khan, S G; Ali, S; Athar, M; Rahman, Q

    1993-06-01

    DNA-damaging effects of asbestos in the presence of organic peroxides and hydroperoxides were investigated. The destabilization of the secondary structure of DNA, damage to deoxyribose sugar and DNA fidelity were measured, respectively, by S-1 nuclease hydrolysis, the formation of thiobarbituric acid (TBA)-reacting species and a melting temperature (Tm) profile using calf thymus DNA. S-1 nuclease hydrolysis and Tm determinations have shown that the presence of benzoylperoxide (BOOB), cumene hydroperoxide (COOH) or tertiary-butyl hydroperoxide (t-BOOH) increased asbestos-mediated DNA damage by a large factor compared either to asbestos alone or to peroxide or hydroperoxide alone. However, no formation of TBA-reacting species could be observed in this system. The quenchers of reactive oxygen species (ROS) afforded protection against DNA damage. These results suggest that asbestos in the presence of organic peroxides and hydroperoxides damage the DNA which is mediated by the generation of oxygen free radicals. The significance of these results in relation to the development of cancer of the respiratory tract among the asbestos exposed population is discussed.

  14. Assessment Of The Location And Availability Of Public Facilities And Services In Port Harcourt Metropolis In Rivers State Nigeria

    Directory of Open Access Journals (Sweden)

    Eyenghe Tari

    2015-06-01

    Full Text Available ABSTRACT The continues increase in both urban and rural population has birthed the problem of inadequate availability of facilities and social services thus giving rise to social disparity and unequal access to basic facilities and services by people of the same population spectrum. Consequently the problem of social disparity inequality is on the increase and is gaining global and local attention. Despite the efforts of government to combat this social problem it is still raising its head in form of unequal access to educational facilities heath care good roads emergency services and etcetera. Hence the study was intended to ascertain whether or not there is disparity in distribution and access to facilities and services by assessing facilities and services in Port Harcourt City. The study adopted the simple random technique for data collection. Also primary and secondary data were the major data collected with the use of closed ended structured questionnaire. However the result of the study showed that income formed a major determining factor in the distribution of facilities and services in Port Harcourt while population threshold was not considered significantly in the study area. However the study revealed that there is gap in the distribution of facilities and services in Port Harcourt City. The recommendations included the involvement of the citizens at grass root in decision making facilities and services should be provided with respect to actual population on ground income level should not determine facilities and service distribution. The study concluded that there is disparity and unequal access in the distribution of social services and facilities.

  15. The regulation for delivery of subsidies for measures of promoting power source location for nuclear power generating facilities

    International Nuclear Information System (INIS)

    1977-01-01

    The Regulation is based on the prescriptions of the Enforcement Order for the Law for Arrangement of Surrounding Areas of Power Generating Facilities, the Law for Proper Budget Enforcement Concerning Subsidies and its Enforcement Order. These rules apply to the subsidies concerning nuclear power generating facilities, reprocessing facilities and test and examination facilities for nuclear fuel materials used for power generating reactors, reactors used for research on the safety of power generating reactors, and experimental reactors for fast breeder reactors. The limits of subsidies are specified respectively for the cases that a unit of power generating facility or two and more units of such facilities are set up in a local municipality. The subsidies are delivered for the expenses occurred in the period, beginning from the fiscal year when construction of the generating facility concerned starts or the arrangement plan of the concerned project is approved, and ending in the fiscal year when such construction comes to an end. The subsidies are given as evenly as possible in each fiscal year. The applicants of the subsidies file the applications attached with the explanations of the projects to the chief of the competent ministry (Director General of the Science and Technology Agency or the Minister of International Trade and Industry). Terms of delivery, reports submitted by the receivers of the subsidies and other related matters are specified. (Okada, K.)

  16. NIMBY, CLAMP, and the location of new nuclear-related facilities: U.S. national and 11 site-specific surveys.

    Science.gov (United States)

    Greenberg, Michael R

    2009-09-01

    Public and political opposition have made finding locations for new nuclear power plants, waste management, and nuclear research and development facilities a challenge for the U.S. government and the nuclear industry. U.S. government-owned properties that already have nuclear-related activities and commercial nuclear power generating stations are logical locations. Several studies and utility applications to the Nuclear Regulatory Commission suggest that concentrating locations at major plants (CLAMP) has become an implicit siting policy. We surveyed 2,101 people who lived within 50 miles of 11 existing major nuclear sites and 600 who lived elsewhere in the United States. Thirty-four percent favored CLAMP for new nuclear power plants, 52% for waste management facilities, and 50% for new nuclear laboratories. College educated, relatively affluent male whites were the strongest CLAMP supporters. They disproportionately trusted those responsible for the facilities and were not worried about existing nuclear facilities or other local environmental issues. Notably, they were concerned about continuing coal use. Not surprisingly, CLAMP proponents tended to be familiar with their existing local nuclear site. In short, likely CLAMP sites have a large and politically powerful core group to support a CLAMP policy. The challenge to proponents of nuclear technologies will be to sustain this support and expand the base among those who clearly are less connected and receptive to new nearby sites.

  17. 40 CFR 427.20 - Applicability; description of the asbestos-cement sheet subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos-cement sheet subcategory. 427.20 Section 427.20 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos-Cement Sheet Subcategory § 427.20 Applicability; description of the asbestos-cement sheet... asbestos, Portland cement, silica, and other ingredients are used in the manufacturing of asbestos-cement...

  18. 40 CFR 427.10 - Applicability; description of the asbestos-cement pipe subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos-cement pipe subcategory. 427.10 Section 427.10 Protection of Environment ENVIRONMENTAL PROTECTION... Asbestos-Cement Pipe Subcategory § 427.10 Applicability; description of the asbestos-cement pipe... asbestos. Portland cement, silica and other ingredients are used in the manufacturing of asbestos-cement...

  19. Evaluation of exposure to the airborne asbestos in an asbestos cement sheet manufacturing industry in Iran.

    Science.gov (United States)

    Panahi, Davood; Kakooei, Hossein; Marioryad, Hossein; Mehrdad, Ramin; Golhosseini, Mohammad

    2011-07-01

    Iran imports nearly 55,000 tons of Chrysotile asbestos per year and asbestos cement (AC) plants contribute nearly 94% of the total national usage. In the present study, airborne asbestos concentrations during AC sheet manufacturing were measured. The fiber type and its chemical composition were also evaluated by scanning electron microscopy (SEM), with energy-dispersive X-ray analysis. Airborne total fiber concentrations of 45 personal samples were analyzed by phase contrast microscopy. The results have highlighted that 15.5% of samples exceed the threshold limit value (TLV) established the American Conference of Governmental Industrial Hygienists, which is 0.1 fiber per milliliter (f/ml). Personal monitoring of asbestos fiber levels indicated a ranged from 0.02 ± 0.01 to 0.16 ± 0.03 f/ml. The geometrical mean was 0.05 ± 1.36 f/ml, which is considerably lower than the TLV. SEM data demonstrate that the fibrous particles consisted, approximately, of Chrysotile (55.89%) and amphiboles (44.11%). We conclude that the industrial consumption of imported Chrysotile asbestos is responsible for the high airborne amphibole asbestos levels in the AC sheet industry. More research is needed to improve characterization of occupational exposures by fiber size and concentration in a variety of industries.

  20. Penetration of asbestos fibers in respirator filters

    International Nuclear Information System (INIS)

    Cheng, Yung-Sung; Pearson, S.D.; Rohrbacher, K.D.; Yeh, Hsu-Chi.

    1994-01-01

    Currently, the health risks associated with asbestos have restricted its use and created a growing asbestos abatement industry with a need for respirator filters that are effective for worker protection. The main purpose of this project is to determine the influence of fiber size, electrostatic charge, and flow rate on the penetration of asbestos fibers in respirator filter cartridges. The study includes four types of filters each tested at two flow rates: the AO-R57A, a dual cartridge HEPA filter tested at 16 and 42.5 L/min; the MSA-S, a dust and mist filter tested at 16 and 42.5 L/min; the MSA-A power filter tested at 32 and 85 L/min; and the 3M-8710, a low-efficiency disposable face mask filter tested at 32 and 85 L/min. The three types of asbestos fibers used (amosite, crocidolite, and chrysotile) ranged in length from 0.04-0.5 μm and in aspect ratio (ratio of length to diameter) from 3 to 60. The fibers were used in both charged and neutralized forms. The results from amosite fibers are reported here

  1. 29 CFR 1926.1101 - Asbestos.

    Science.gov (United States)

    2010-07-01

    ..., grinding or other method that breaks, crumbles, or disintegrates intact ACM. Amended water means water to... by this standard, even though the general contractor is not qualified to serve as the asbestos... months of the current or projected job, the monitoring and analysis were performed in compliance with the...

  2. 29 CFR 1910.1001 - Asbestos.

    Science.gov (United States)

    2010-07-01

    ... dust cloud created by the compressed air. (x) Flooring. Sanding of asbestos-containing flooring... employer ceases to do business and there is no successor employer to receive and retain the records for the... written justification for the need to use the 37-mm filter cassette accompanies the sample results in the...

  3. 30 CFR 71.702 - Asbestos standard.

    Science.gov (United States)

    2010-07-01

    ...-diameter ratio of at least 3-to-1. (b) Permissible Exposure Limits (PELs)—(1) Full-shift limit. A miner's... concentration of 0.1 fiber per cubic centimeter of air (f/cc). (2) Excursion limit. No miner shall be exposed at...) as averaged over a sampling period of 30 minutes. (c) Measurement of airborne asbestos fiber...

  4. Asbestos free friction composition for brake linings

    Indian Academy of Sciences (India)

    An asbestos free friction material composite for brake linings is synthesized containing fibrous reinforcing constituents, friction imparting and controlling additives, elastomeric additives, fire retarding components and a thermosetting resin. The composite shows exemplary friction characteristics and has great resistance to ...

  5. Mesothelioma among employees with likely contact with in-place asbestos-containing building materials.

    Science.gov (United States)

    Anderson, H A; Hanrahan, L P; Schirmer, J; Higgins, D; Sarow, P

    1991-12-31

    The occurrence of mesothelioma is a sentinel event in occupational and environmental disease. A mesothelioma surveillance system was established utilizing existing computerized Wisconsin vital statistics data maintained since 1959 and a Cancer Reporting System (CRS) established in 1978. Review of the death certificate listing of usual occupation and industry from 487 mesothelioma deaths in Wisconsin from 1959 to 1989 led to the investigation of 41 persons with likely exposure to inplace asbestos-containing building materials (ACBM): 12 school teachers, 10 school maintenance employees, 7 public building maintenance workers, 5 private building maintenance workers, and 7 commercial and factory workers performing maintenance activities. For 10 (34%) of the 29 maintenance workers the only source of asbestos exposure identified was their maintenance work. For five (17%) histories indicated some prior employment in occupations and industries with probable asbestos exposures. Opportunities for indirect occupational exposure were identified for ten who had been employed in the residential construction industry. One maintenance worker was exposed to asbestos in the household and another had neighborhood exposure. For 9 (75%) of the school teachers, the only identifiable potential source of asbestos exposure was derived from in-place ACBM in schools. One teacher had spent a season in the merchant marine aboard an iron ore-hauling ship and 2 had worked in the residential construction industry. Two of the teachers were sisters, and in two instances, two teachers had taught in the same school facility. We conclude that individuals occupationally exposed to in-place ACBM are at risk for the subsequent development of mesothelioma.

  6. Solving multi-objective facility location problem using the fuzzy analytical hierarchy process and goal programming: a case study on infectious waste disposal centers

    Directory of Open Access Journals (Sweden)

    Narong Wichapa

    Full Text Available The selection of a suitable location for infectious waste disposal is one of the major problems in waste management. Determining the location of infectious waste disposal centers is a difficult and complex process because it requires combining social and environmental factors that are hard to interpret, and cost factors that require the allocation of resources. Additionally, it depends on several regulations. Based on the actual conditions of a case study, forty hospitals and three candidate municipalities in the sub-Northeast region of Thailand, we considered multiple factors such as infrastructure, geological and social & environmental factors, calculating global priority weights using the fuzzy analytical hierarchy process (FAHP. After that, a new multi-objective facility location problem model which combines FAHP and goal programming (GP, namely the FAHP-GP model, was tested. The proposed model can lead to selecting new suitable locations for infectious waste disposal by considering both total cost and final priority weight objectives. The novelty of the proposed model is the simultaneous combination of relevant factors that are difficult to interpret and cost factors, which require the allocation of resources. Keywords: Multi-objective facility location problem, Fuzzy analytic hierarchy process, Infectious waste disposal centers

  7. Facility Location for Solid Waste Management through Compilation and Multicriterial Ranking of Optimal Decentralised Scenarios: A Case Study for the Region of Peloponesse in Southern Greece

    Directory of Open Access Journals (Sweden)

    A. Karagiannidis

    2004-12-01

    Full Text Available The present paper addresses the problem of locating solid waste management facilities.Specifically, it studies and proposes optimal alternative solutions for the Greek Region of Peloponnese,by examining facilities for transferring, sorting, treating and landfilling of wastes. Quantitative and qualitative databases concerning the current solid waste management at the Region have been created and used by the model. A customized mixed-integer linear network model has been developed and solved for various evaluation criteria on a single-criterion basis by the use of a location-allocation modeling framework.The solutions resulting from the parametrical application of the multicriterial method ELECTRE III are then ranked for the entire criteria-spectrum. The best alternative scenario is presented for the Region in accordance with current legislation on waste management, which maximizes environmental benefits and promotes recycling, in the frame of sustainable waste management.

  8. The regulation for delivery of subsidies for measures of promoting power source location for nuclear power generating facilities

    International Nuclear Information System (INIS)

    1979-01-01

    The regulation is defined under the law for arrangement of surrounding areas of power generating facilities and the law concerning subsidies and others. Limits of the subsidies are stipulated respectively for establishment of a unit and simultaneous construction of more than 2 units of power generating facilities in the area of self-governing bodies concerned. Limits of the subsidies for an arrangement business out of the area of self-governing bodies where the facilities are set up shall be equal to those of the subsidies for such bodies. The Director General of Science and Technology Agency and the Minister of International Trade and Industry may make the amounts otherwise determined the limits of the subsidies, when considered necessary successfully to build the facilities. The term of delivery is from a fiscal year in which a later one of either the day of beginning of the construction concerned or the day of acknowledgment of the arrangement program of the business is included, through a fiscal year when the work finishes. An application for subsidies shall be filed to the head of the authorities concerned with gists of the business according to the forms attached. Receiving the application, the head of the authorities shall examine it and notify to the applicant without delay in writing the decision of delivery and its conditions, when such settlement is made. (Okada, K.)

  9. Location for new research facility determined X-ray laser XFEL to be realized in the federal states of Hamburg and Schleswig-Holstein starting in 2006

    CERN Multimedia

    2003-01-01

    "...The site for the XFEL has now been determined by the research center DESY (Deutsches Elektronen-Synchrotron); it was announced today at a press conference in Hamburg. The 3.3-kilometer-long facility is to be located in the federal states of Hamburg and Schleswig-Holstein. It will begin on the DESY site in Hamburg-Bahrenfeld and run in a north-western direction to the town of Schenefeld (district of Pinneberg), which borders on Hamburg" (1 page).

  10. The regulation for delivery of subsidies for measures of promoting power source location for nuclear power generating facilities

    International Nuclear Information System (INIS)

    1984-01-01

    According to the law for the arrangement of surrounding areas of power generating facilities, the regulations concern the allocation of subsidies to promote the most efficient way of siting nuclear power facilities. The contents consist of the following: limits on the subsidies, terms of subsidy allocations, the sum of subsidies for each respective year, applications for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions attached to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of the subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, payment of subsidies, accounting of the subsidy operations, a record of the subsidies, and the chief in the governmental office concerned. (Mori, K.)

  11. Characterization of Lone Pine, California, tremolite asbestos and preparation of research material

    Science.gov (United States)

    Harper, Martin; Van Gosen, Bradley S.; Crankshaw, Owen S; Doorn, Stacy S; Ennis, J. Todd; Harrison, Sara E

    2014-01-01

    Well-characterized amphibole asbestos mineral samples are required for use as analytical standards and in future research projects. Currently, the National Institute for Standards and Technology Standard Reference Material samples of asbestos are listed as ‘Discontinued’. The National Institute for Occupational Safety and Health (NIOSH) has a goal under the Asbestos Roadmap of locating and characterizing research materials for future use. Where an initial characterization analysis determines that a collected material is appropriate for use as a research material in terms of composition and asbestiform habit, sufficient amounts of the material will be collected to make it publicly available. An abandoned mine near Lone Pine, California, contains a vein of tremolite asbestos, which was the probable source of a reference material that has been available for the past 17 years from the Health and Safety Laboratory (HSL) in the UK. Newly collected fibrous vein material from this mine was analyzed at Research Triangle Institute (RTI International) with some additional analysis by the US Geological Survey’s Denver Microbeam Laboratory. The analysis at RTI International included: (i) polarized light microscopy (PLM) with a determination of principal optical properties; (ii) X-ray diffraction; (iii) transmission electron microscopy, including energy dispersive X-ray spectroscopy and selected-area electron diffraction; and (iv) spindle stage analysis using PLM to determine whether individual fibers and bundles of the samples were polycrystalline or single-crystal cleavage fragments. The overall findings of the study indicated that the material is tremolite asbestos with characteristics substantially similar to the earlier distributed HSL reference material. A larger quantity of material was prepared by sorting, acid-washing and mixing for sub-division into vials of ~10g each. These vials have been transferred from NIOSH to RTI International, from where they can be

  12. Experience of Japan in Achieving a Total Ban on Asbestos

    Directory of Open Access Journals (Sweden)

    Sugio Furuya

    2017-10-01

    Full Text Available This paper aims to examine the process through which a total ban on asbestos was achieved in Japan. We reconstructed the process, analyzed the roles of involved parties/events, and drew lessons from the Japanese experience of achieving the ban. In Japan, a bill to phase out asbestos was proposed in 1992 but rejected without deliberation. Wide support for such a ban subsequently grew, however, largely due to the actions of trade unions and civil societies in establishing a coalition, raising awareness, organizing asbestos victims and their families, and propagating information on international developments. A governmental decision towards a ban was made in 2002 based on several national and international factors. A huge asbestos scandal in 2005 preponed the achievement of a total ban and led to the establishment of comprehensive measures to tackle asbestos issues. However, challenges remain for the elimination of asbestos-related diseases.

  13. Defining asbestos: differences between the built and natural environments.

    Science.gov (United States)

    Gunter, Mickey E

    2010-01-01

    Asbestos - while most think they know what this material is, few understand the current issues surrounding it. Few would also realize that asbestos is the form of a mineral, and even fewer would know that there are different types of asbestos, that not only had different industrial applications, but pose differing health risks when inhaled. Asbestos was in wide-spread use mid-last century in many consumer products, and no doubt saved thousands of lives, but by the latter part of last century concerns over its health risk caused its use to wane, to the point it was removed from many buildings. So in many ways the asbestos story was coming to an end in the 1990s, but two events in the USA - the vermiculite ore produced from Libby, Montana which contained amphibole asbestos and was used in a million homes in the USA as attic insulation and the concern for exposure to asbestos occurring in its natural setting in El Dorado Hills, California led to an increased concern of the potential for low-level environmental exposure to asbestos to the general public. The current dilemma we find ourselves in, especially in the USA, deals with the relationships between our knowledge of handling asbestos and an understanding of its risk potential in the built environment versus the natural environment. And one perfect metaphor for this is the term used by many non-geologists to differentiate asbestos in the built vs natural environment - 'naturally occurring asbestos'. Clearly a misstatement, but only one of many we must deal with as we struggle to understand the risk to humans of natural occurrences of asbestos. This paper will try and address some of these issues centering around those occurring in the USA.

  14. Asbestos case and its current implications for global health

    Directory of Open Access Journals (Sweden)

    Daniela Marsili

    2013-09-01

    Full Text Available Notwithstanding a major body of evidence on the carcinogenicity of all asbestos fibres and a general consensus of the scientific community on the health impact of this agent, asbestos is still produced and used in a large number of countries, thus determining further harm for future generations. Prevention of asbestos-related disease requires international cooperation, transfer of know-how and dissemination of successful procedures in order to contrast asbestos exposure in the frame of a global environmental health approach.

  15. A Comparative Assesment of Facility Location Problem via fuzzy TOPSIS and fuzzy VIKOR: A Case Study on Security Services

    Directory of Open Access Journals (Sweden)

    Dilşad GÜZEL

    2015-05-01

    Full Text Available Today, law enforcement and security services are critically important for peace and prosperity of communities. The law enforcement forces serve citizens using security materials. The distribution of security materials is the dominant factor in determining the outcome of law enforcement duties. Failing to supply the required amounts of security materials properly, when and where it is needed, can lead to chaos. In this study, it is aimed to provide a decision support tool that can help to select the most appropriate location of security materials distribution center. The distribution center location problem is a complex multi-criteria problem including both quantitative and qualitative factors which may be in conflict and may also be uncertain. We proposed a comparative analysis that exploits fuzzy TOPSIS and fuzzy VIKOR techniques. Fuzzy weights of the 20 criteria and fuzzy judgments about 4 potential locations of distribution center as alternatives are employed to compute evaluation scores and ranking. Based on the evaluation criteria, Konya has been found the best alternative accourding to both techniques as well.

  16. Facilities & Leadership

    Data.gov (United States)

    Department of Veterans Affairs — The facilities web service provides VA facility information. The VA facilities locator is a feature that is available across the enterprise, on any webpage, for the...

  17. Throughput capacity of the Asbestos Conversion Unit

    International Nuclear Information System (INIS)

    Hyman, M.H.

    1996-10-01

    An engineering assessment is presented for factors that could significantly limit the throughput capacity of the Asbestos Conversion Unit. The assessment focuses mainly on volumetric throughput capacity (and related mass rate and feed density), and energy input. Important conclusions that were reached during this assessment are that the throughput is limited by feed densification capability and that the design energy input rating appears to be adequate

  18. Infectious disease risk in asbestos abatement workers.

    Science.gov (United States)

    Lange, John H; Mastrangelo, Giuseppe; Cegolon, Luca

    2012-08-16

    The current literature reports increased infectious disease occurrence in various construction occupations, as an important contributor to morbidity and mortality arising from employment.These observations should be expanded to asbestos abatement workers, as the abatement can create an environment favorable for bacterial, viral and fungal infections. Asbestos abatement work employs activities resulting in cuts, blisters and abrasions to the skin, work in a dirty environment and exposure to dust, mists and fumes.Furthermore, this population exhibits a high smoking rate which increases the risk of chronic obstructive pulmonary disease and respiratory infections.In addition, these workers also commonly employ respirators, which can accumulate dirt and debris magnifying exposure to microbes. Use of respirators and related types of personal protective equipment, especially if shared and in the close environment experienced by workers, may enhance communicability of these agents, including viruses. Abatement workers need to be provided with information on hazards and targeted by appropriate health education to reduce the infection risk. Epidemiological studies to investigate this risk in asbestos removers are recommended.

  19. Clinical Investigation of Benign Asbestos Pleural Effusion

    Directory of Open Access Journals (Sweden)

    Nobukazu Fujimoto

    2015-01-01

    Full Text Available There is no detailed information about benign asbestos pleural effusion (BAPE. The aim of the study was to clarify the clinical features of BAPE. The criteria of enrolled patients were as follows: (1 history of asbestos exposure; (2 presence of pleural effusion determined by chest X-ray, CT, and thoracentesis; and (3 the absence of other causes of effusion. Clinical information was retrospectively analysed and the radiological images were reviewed. There were 110 BAPE patients between 1991 and 2012. All were males and the median age at diagnosis was 74 years. The median duration of asbestos exposure and period of latency for disease onset of BAPE were 31 and 48 years, respectively. Mean values of hyaluronic acid, adenosine deaminase, and carcinoembryonic antigen in the pleural fluid were 39,840 ng/mL, 23.9 IU/L, and 1.8 ng/mL, respectively. Pleural plaques were detected in 98 cases (89.1%. Asbestosis was present in 6 (5.5% cases, rounded atelectasis was detected in 41 (37.3% cases, and diffuse pleural thickening (DPT was detected in 30 (27.3% cases. One case developed lung cancer (LC before and after BAPE. None of the cases developed malignant pleural mesothelioma (MPM during the follow-up.

  20. Validity and Reliability of Asbestos Knowledge and Awareness Questionnaire for Environmental Asbestos Exposure in Rural Areas

    Directory of Open Access Journals (Sweden)

    Selma Metintaş

    2017-04-01

    Full Text Available Objective: There is no treatment for asbestos–related diseases, but they can be prevented. One of the first interventions is to improve the knowledge level of people in order to protect people from asbestos and asbestos–related diseases. The present study was conducted to develop a questionnaire for measuring the knowledge and awareness level of asbestos and also assess its validity and reliability in a rural population that is exposed to asbestos environmentally. Methods: A questionnaire, interviewer–administered, that included 37 items was employed on a convenient sample consisting of adult persons who attended a tertiary teaching hospital in Eskişehir where asbestos exposure is widespread in its rural areas. After assessment of validity and reliability of the results, the questionnaire was refined to 19 items and one subscale. Results: A total of 760 participants were included in this study. The mean age of participants was 53.2±15.1 years and 51.6% of them were male. The discrimination and difficulty indices of the asbestos knowledge and awareness questionnaire ranged between 20.0–60.5% and 0.39–0.98, respectively. Cronbach’s alpha coefficient was 0.951 for overall items. The median (min–max and mean (SD score of the study population were 30 (19–56 and 33.9 (11.9, respectively. The score increased correspondingly with greater knowledge levels. Conclusion: This questionnaire is a practical and easy tool to apply with acceptable reliability and validity on high-risk adults in rural areas with environmental asbestos exposure.

  1. Combining Facility Location and Routing Decisions in Sustainable Urban Freight Distribution under Horizontal Collaboration: How Can Shippers Be Benefited?

    Directory of Open Access Journals (Sweden)

    Hanan Ouhader

    2017-01-01

    Full Text Available This article investigates the potential economic, environmental, and social effects of combining depot location and vehicle routing decisions in urban road freight transportation under horizontal collaboration. We consider a city in which several suppliers decide to joint deliveries to their customers and goods are delivered via intermediate depots. We study a transportation optimization problem from the perspective of sustainability development. This quantitative approach is based on three-objective mathematical model for strategic, tactical, and operational decision-making as a two-echelon location routing problem (2E-LRP. The objectives are to minimize cost and CO2 emissions of the transportation and maximize the created job opportunities. The model was solved with the ε-constraint method using extended known instances reflecting the real distribution in urban area to evaluate several goods’ delivery strategies. The obtained results by comparing collaborative and noncollaborative scenarios show that collaboration leads to a reduction in CO2 emissions, transportation cost, used vehicles, and travelled distances in addition to the improvement of the vehicles load rate but collaboration affects negatively social impact. To evaluate the effect of the method used to allocate the total gains to the different partners, we suggest to decision makers a comparison between well-known allocation methods.

  2. [A Forensic Autopsy Case Applied for Asbestos-Related Disease].

    Science.gov (United States)

    Makihara, Kosuke; Hamada, Tetsuo; Kasai, Kentaro; Tanaka, Toshiko; Sato, Hiroaki

    2016-03-01

    We had a forensic autopsy case that required additive pathological examination for the asbestos-related lung disease compensatory application afterwards. A man in his sixties with a history of occupational asbestos inhalation who had neither visited a hospital nor received a physical examination received forensic autopsy because of his death from unknown cause. An inmate said, "He developed cough and dyspnea, and died in the progression of the symptoms." The autopsy revealed widespread pleural plaques on both sides of the parietal pleura and multiple tumors in both sides of the lungs. The cause of death was diagnosed as lung cancer. Additional pathological examination was asked by his family to certify that he had suffered from asbestos-related lung disease in order to apply to the Asbestos-related Damage Relief Law. The Japanese criteria of the compensation law of asbestos-related lung cancer is the detection of more than 5,000 asbestos bodies per gram of dry lung tissue, while his number of asbestos bodies was 4,860. Asbestos bodies were reported to be accumulated in the distal lung parenchyma with no pathological changes. The present lung samples were collected from proximal section around the tumor, which might have made the number of asbestos bodies less than the criteria. Both the number of patients suffering from asbestos-related lung disease and the number of forensic autopsy cases have increased in Japan. Collecting lung samples from the appropriate lung section is essential and should be noted when the lung cancer is suspected at forensic autopsy in order to apply for asbestos-related lung disease compensation.

  3. Asbestos and cancer: epidemiological and public health controversies.

    Science.gov (United States)

    Huncharek, M

    1994-01-01

    This paper discusses many of the currently controversial issues surrounding asbestos health effects and their relationship to cancer risk assessment and risk management. The major conclusions reached from this analysis are: (1) All asbestos fiber types are carcinogenic and pose a threat to human health. Therefore, all fiber types should be regulated similarly. (2) The health risks associated with indoor asbestos exposure are uncertain. Available data show that some groups, such as building maintenance personnel (among others), may contract asbestos-related diseases secondary to indoor exposure. Clearly, additional research is needed to accurately determine the extent and nature of disease risk under these conditions. (3) Controlled use has proved an elusive goal. Limited information from underdeveloped countries parallels the experience of Western industrialized nations. Efforts by the Canadian government to establish markets for asbestos in these areas should be opposed. (4) Finally, asbestos-related cancer risk is no longer confined to asbestos industry workers. Asbestos-related mesothelioma has been documented in a wide variety of occupational and nonoccupational settings, highlighting the need for continued surveillance to minimize potential health risks.

  4. UK asbestos imports and mortality due to idiopathic pulmonary fibrosis.

    Science.gov (United States)

    Barber, C M; Wiggans, R E; Young, C; Fishwick, D

    2016-03-01

    Previous studies have demonstrated that the rising mortality due to mesothelioma and asbestosis can be predicted from historic asbestos usage. Mortality due to idiopathic pulmonary fibrosis (IPF) is also rising, without any apparent explanation. To compare mortality due to these conditions and examine the relationship between mortality and national asbestos imports. Mortality data for IPF and asbestosis in England and Wales were available from the Office for National Statistics. Data for mesothelioma deaths in England and Wales and historic UK asbestos import data were available from the Health & Safety Executive. The numbers of annual deaths due to each condition were plotted separately by gender, against UK asbestos imports 48 years earlier. Linear regression models were constructed. For mesothelioma and IPF, there was a significant linear relationship between the number of male and female deaths each year and historic UK asbestos imports. For asbestosis mortality, a similar relationship was found for male but not female deaths. The annual numbers of deaths due to asbestosis in both sexes were lower than for IPF and mesothelioma. The strength of the association between IPF mortality and historic asbestos imports was similar to that seen in an established asbestos-related disease, i.e. mesothelioma. This finding could in part be explained by diagnostic difficulties in separating asbestosis from IPF and highlights the need for a more accurate method of assessing lifetime occupational asbestos exposure. © Crown copyright 2015.

  5. Asbestos exposure and mesothelioma in South Africa | Rees | South ...

    African Journals Online (AJOL)

    Objectives. To describe the exposure experiences of South African mesothelioma cases, with emphasis on the contribution made to the caseload by different fibre types, the proportion of subjects with no recall of asbestos exposure and only environmental contact, and the importance of putative causes other than asbestos.

  6. Study on plasma melting treatment of crucibles, ceramic filter elements, asbestos, and fly ash

    International Nuclear Information System (INIS)

    Hoshi, Akiko; Nakasio, Nobuyuki; Nakajima, Mikio

    2004-01-01

    The Japan Atomic Energy Research Institute (JAERI) decided to adopt an advanced volume reduction program for low-level radioactive wastes. In this program, inorganic wastes are converted to stable glassy products suitable for disposal by a plasma melting system in the Waste Volume Reduction Facilities (WVRF). High melting point wastes such as refractories are excluded from the plasma melting treatment in the WVRF, and wastes difficult to handle such as asbestos are also excluded. However, it is describable to apply the plasma melting treatment to these wastes for stabilization and volume reduction from the viewpoint of disposal. In this paper, plasma melting test of crucibles, ceramic filter elements, asbestos, and simulated fly ashes were carried out as a part of technical support for WVRF. The plasma melting treatment was applicable for crucibles and asbestos because homogeneous and glassy products were obtained by controlling of waste and loading condition. It was found that SiC in ceramic filter elements was volatile with a plasma torch with inert gas, and adding reducer was ineffective against stabilizing volatile metals such as Zn, Pb in a solidified product in the melting test of simulated fly ash. (author)

  7. [Possible health risks from asbestos in drinking water].

    Science.gov (United States)

    Di Ciaula, Agostino; Gennaro, Valerio

    2016-01-01

    The recent finding of asbestos fibres in drinking water (up to 700.000 fibres/litres) in Tuscany (Central Italy) leads to concerns about health risks in exposed communities. Exposure to asbestos has been linked with cancer at several levels of the gastrointestinal tract, and it has been documented, in an animal model, a direct cytotoxic effect of asbestos fibres on the ileum. It has been recently described a possible link between asbestos and intrahepatic cholangiocarcinoma, and asbestos fibres have been detected in humans in histological samples from colon cancer and in gallbladder bile. Taken together, these findings suggest the possibility of an enterohepatic translocation of asbestos fibres, alternative to lymphatic translocation from lungs. In animal models, asbestos fibres ingested with drinking water act as a co-carcinogen in the presence of benzo(a) pyrene and, according to the International Agency for Research on Cancer (IARC ), there is evidence pointing to a causal effect of ingested asbestos on gastric and colorectal cancer. The risk seems to be proportional to the concentration of ingested fibres, to the extent of individual water consumption, to exposure timing, and to the possible exposure to other toxics (i.e., benzo(a)pyrene). Furthermore, the exposure to asbestos by ingestion could explain the epidemiological finding of mesothelioma in subjects certainly unexposed by inhalation. In conclusion, several findings suggest that health risks from asbestos could not exclusively derive from inhalation of fibres. Health hazards might also be present after ingestion, mainly after daily ingestion of drinking water for long periods. In Italy, a systemic assessment of the presence of asbestos fibres in drinking water is still lacking, although asbestos-coated pipelines are widely diffused and still operating. Despite the fact that the existence of a threshold level for health risks linked to the presence of asbestos in drinking water is still under debate, the

  8. Double standards: the multinational asbestos industry and asbestos-related disease in South Africa.

    Science.gov (United States)

    McCulloch, Jock; Tweedale, Geoffrey

    2004-01-01

    This study documents and contrasts the development of knowledge about asbestos-related disease (ARD) in South Africa and the United Kingdom. It also contributes to the globalization debate by exploring corporate decision-making in a multinational industry. Between the 1930s and 1960s, the leading U.K. asbestos companies developed a sophisticated knowledge of ARD, though in South Africa, where the leading companies such as Turner & Newall and Cape Asbestos owned mines, there was little attempt to apply this knowledge. Asbestos mines (and their environments) in South Africa were uniquely dusty and ARD was rife. Social and political factors in South Africa, especially apartheid, allowed these companies to apply double standards, even after 1960 when the much more serious hazard of mesothelioma was identified. This shows the need for greater regulation of multinationals. Because of the lack of such regulation in the early 1960s, an opportunity was lost to prevent the current high morbidity and mortality of ARD both in South Africa and worldwide.

  9. [Asbestos at the time of the First World War].

    Science.gov (United States)

    Bianchi, C; Bianchi, T

    2015-11-22

    Between the end of the 19th century and the beginning of the 20th numerous asbestos industries began operations in various parts of the world. At the time of the First World War there is ample evidence of the use of this mineral in shipbuilding, the aircraft industry and in the construction industry. In the years 1912-17 the writer Franz Kafka was co-proprietor of a small asbestos factory in Prague. Some of the writer's novels and journal pages were inspired by this experience. In this way asbestos entered into the history of 20th century European literature. In 1917 asbestos extraction was started at the quarry in Balangero, near Turin, Italy. Risks related to the use of asbestos were known at the beginning of the 20th century and legislation aimed at preventing the harmful effects of the mineral were approved in Italy.

  10. Guidelines for Assessment and Abatement of Asbestos-Containing Materials in Buildings.

    Science.gov (United States)

    Pielert, James H.; Mathey, Robert G.

    This report presents guidelines, based on available information, for the assessment and abatement of asbestos-containing materials in buildings. Section 1 provides background information on the history and use of asbestos-containing products in buildings, the characteristics of asbestos fibers, products and materials containing asbestos, and…

  11. Treatment of airborne asbestos and asbestos-like microfiber particles using atmospheric microwave air plasma

    Energy Technology Data Exchange (ETDEWEB)

    Averroes, A., E-mail: aulia.a.aa@m.titech.ac.jp [Department of Chemical Engineering, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo 152-8552 (Japan); Sekiguchi, H. [Department of Chemical Engineering, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo 152-8552 (Japan); Sakamoto, K. [Street Design Corporation, 6-9-30 Shimo odanaka, Kawasaki-shi, Kanagawa 211-0041 (Japan)

    2011-11-15

    Highlights: {yields} We use atmospheric microwave air plasma to treat ceramic fiber and stainless fiber as asbestos alike micro fiber particle. {yields} Spheroidization of certain type of ceramic fiber and stainless fiber particle. {yields} The evaluation of the treated particles by the fiber vanishing rate. {yields} Good fiber vanishing rate is observed for fiber particle with diameter below 10 {mu}m. {yields} The treatment of pure asbestos and a suggestion of the use of this method for the treatment airborne asbestos. - Abstract: Atmospheric microwave air plasma was used to treat asbestos-like microfiber particles that had two types of ceramic fiber and one type of stainless fiber. The treated particles were characterized via scanning electron microscopy (SEM) and X-ray diffraction (XRD). The experiment results showed that one type of ceramic fiber (Alumina:Silica = 1:1) and the stainless fiber were spheroidized, but the other type of ceramic fiber (Alumina:Silica = 7:3) was not. The conversion of the fibers was investigated by calculating the equivalent diameter, the aspect ratio, and the fiber content ratio. The fiber content ratio in various conditions showed values near zero. The relationship between the normalized fiber vanishing rate and the energy needed to melt the particles completely per unit surface area of projected particles, which is defined as {eta}, was examined and seen to indicate that the normalized fiber vanishing rate decreased rapidly with the increase in {eta}. Finally, some preliminary experiments for pure asbestos were conducted, and the analysis via XRD and phase-contrast microscopy (PCM) showed the availability of the plasma treatment.

  12. Treatment of airborne asbestos and asbestos-like microfiber particles using atmospheric microwave air plasma

    International Nuclear Information System (INIS)

    Averroes, A.; Sekiguchi, H.; Sakamoto, K.

    2011-01-01

    Highlights: → We use atmospheric microwave air plasma to treat ceramic fiber and stainless fiber as asbestos alike micro fiber particle. → Spheroidization of certain type of ceramic fiber and stainless fiber particle. → The evaluation of the treated particles by the fiber vanishing rate. → Good fiber vanishing rate is observed for fiber particle with diameter below 10 μm. → The treatment of pure asbestos and a suggestion of the use of this method for the treatment airborne asbestos. - Abstract: Atmospheric microwave air plasma was used to treat asbestos-like microfiber particles that had two types of ceramic fiber and one type of stainless fiber. The treated particles were characterized via scanning electron microscopy (SEM) and X-ray diffraction (XRD). The experiment results showed that one type of ceramic fiber (Alumina:Silica = 1:1) and the stainless fiber were spheroidized, but the other type of ceramic fiber (Alumina:Silica = 7:3) was not. The conversion of the fibers was investigated by calculating the equivalent diameter, the aspect ratio, and the fiber content ratio. The fiber content ratio in various conditions showed values near zero. The relationship between the normalized fiber vanishing rate and the energy needed to melt the particles completely per unit surface area of projected particles, which is defined as η, was examined and seen to indicate that the normalized fiber vanishing rate decreased rapidly with the increase in η. Finally, some preliminary experiments for pure asbestos were conducted, and the analysis via XRD and phase-contrast microscopy (PCM) showed the availability of the plasma treatment.

  13. Airborne asbestos fibre levels in buildings: a summary of UK measurements.

    Science.gov (United States)

    Burdett, G J; Jaffrey, S A; Rood, A P

    1989-01-01

    The UK Health and Safety Executive, in conjunction with the Department of the Environment, has carried out a number of surveys of airborne asbestos fibre concentrations in buildings. All samples have been collected on membrane filters and analysed by analytical transmission electron microscopy. Four categories of buildings under normal occupation have been investigated; non-domestic buildings containing sprayed or trowelled asbestos, domestic buildings containing sprayed asbestos or asbestos plaster, buildings with warm air heaters containing asbestos and buildings without asbestos materials. A number of buildings have also been surveyed during and after the removal of asbestos materials. The choice of measurement indices and analytical procedures is reviewed, before measurements are compared in terms of the concentration of asbestos fibres greater than 5 microns long. The decision whether to remove asbestos from occupied buildings is discussed with reference to the associated cost and risk. In the present survey, management of undamaged asbestos appeared preferable to large-scale removal.

  14. Malignant Mesothelioma after Household Exposure to Asbestos

    Directory of Open Access Journals (Sweden)

    Raya Saba

    2013-01-01

    Full Text Available Malignant mesothelioma (MM is an aggressive cancer that has been closely linked to asbestos exposure. Initially recognized as an occupational cancer in male workers, MM was later found to occur in their family members as well. We report the case of an 89-year-old female who presented with abdominal distention, pain, and findings consistent with malignant ascites. Family history was significant for fatal mesothelioma in her husband of 40 years, who was a worker at a tile factory. The diagnosis of MM was confirmed on pathologic examination of the omental core biopsy.

  15. Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Takashi, E-mail: tyama@nies.go.jp [Center for Material Cycles and Waste Management Research, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan); Kida, Akiko [Faculty of Agriculture, Ehime University, 3-5-7 Tarumi, Matsuyama, Ehime 790-8566 (Japan); Noma, Yukio [Department of Environmental Science, Fukuoka Womens University, 1-1-1 Kasumigaoka, Higashiku, Fukuoka 813-8529 (Japan); Terazono, Atsushi [Center for Material Cycles and Waste Management Research, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan); Sakai, Shin-ichi [Environmental Preservation Research Center, Kyoto University, Yoshidahonmachi, Sakyoku, Kyoto 606-8501 (Japan)

    2014-02-15

    Highlights: • A high sensitive and selective testing method for asbestos in treated materials of asbestos containing wastes was developed. • Asbestos can be determined at a limits are a few million fibers per gram and a few μg g{sup −1}. • High temperature melting treatment samples were determined by this method. Asbestos fiber concentration were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10{sup 6} g{sup −1}. - Abstract: Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10{sup −6} f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.

  16. Park Facilities, Boundaries were determined from parcel mapping lines & site specific items, such as shelter locations, were obtained by field GPS observation, Published in 2010, Not Applicable scale, Chippewa County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Park Facilities dataset current as of 2010. Boundaries were determined from parcel mapping lines & site specific items, such as shelter locations, were obtained...

  17. Integrating cut-and-solve and semi-Lagrangean based dual ascent for the single-source capacitated facility location problem

    DEFF Research Database (Denmark)

    Gadegaard, Sune Lauth

    polytope with generalized upper bounds. From our computational study, we show that the semi-Lagrangean relaxation approach has its merits when the instances are tightly constrained with regards to the capacity of the system, but that it is very hard to compete with a standalone implementation of the cut......This paper describes how the cut-and-solve framework and semi-Lagrangean based dual ascent algorithms can be integrated in two natural ways in order to solve the single source capacitated facility location problem. The first uses the cut-and-solve framework both as a heuristic and as an exact...... solver for the semi-Lagrangean subproblems. The other uses a semi-Lagrangean based dual ascent algorithm to solve the sparse problems arising in the cut-and-solve algorithm. Furthermore, we developed a simple way to separate a special type of cutting planes from what we denote the effective capacity...

  18. Asbestos in cooling-tower waters. Final report

    International Nuclear Information System (INIS)

    Lewis, B.A.G.

    1979-03-01

    Water discharges from cooling towers constructed with asbestos fill were found to contain chrysotile--asbestos fibers at concentrations as high as 10 8 fibers/liter. The major source of these fibers, appears to be the components of the towers rather than the air drawn through the towers or the makeup water taken into the towers. Suggested mechanisms for the release of chrysotile fibers from cooling-tower fill include freeze-thaw cycles and dissolution of the cement due to acidic components of the circulating water. Ash- or other material-settling ponds were found to reduce asbestos-fiber concentrations in cooling-tower effluent. The literature reviewed did not support the case for a causal relationship between adverse human health effects and drinking water containing on the order of 10 6 chrysotile--asbestos fibers/liter; for this and other reasons, it is not presently suggested that the use of asbestos fill be discontinued. However, caution and surveillance are dictated by the uncertainties in the epidemiological studies, the absence of evidence for a safe threshold concentration in water, and the conclusive evidence for adverse effects from occupational exposure. It is recommended that monitoring programs be carried out at sites where asbestos fill is used; data from such programs can be used to determine whether any mitigative measures should be taken. On the basis of estimates made in this study, monitoring for asbestos in drift from cooling towers does not appear to be warranted

  19. [Pulmonary disease due to asbestos in steel industry workers].

    Science.gov (United States)

    Zurbriggen, Rita; Capone, Lilian

    2013-01-01

    Asbestos-related diseases are caused by the inhalation of asbestos fibers in their variety chrysotile or white asbestos. Although the ban in Argentina dates from 2003, there are numerous industries where work continues with this mineral, including iron and steel industries. It is currently known the high pathogenicity of this material, so that in many countries there are programs to monitoring the exposed workers. Here we describe the general characteristics and pulmonary manifestations in 27 patients who had worked in a very huge steel factory in South America. The diagnosis of asbestos-related diseases was made by a medical-occupational record, history of asbestos exposure, additional studies of lung function and chest images. Then the sources of exposure (occupational, domestic and environmental), exposure time and latency period were analyzed, in those patients in whom a related disease was detected. Smoking history was also taken into account. Twenty-two patients had benigns pathologies (81.4%), sixteen of them with lesions localyzed in pleura, and other six pulmonary asbestosis. The malignant pathologies occurred in five patients (18.5%), in four of them mesothelioma and in other one lung cancer. The problem of asbestos exposure has contemporary relevance. Hence the need for a surveillance program in workers exposed to asbestos in the past or currently, to detect, report, record and investigate the characteristics of these pathologies.

  20. Origin and the mechanical properties of asbestos

    Energy Technology Data Exchange (ETDEWEB)

    O' Hanley, D.S.

    1986-01-01

    Dual networks and chemographic analysis are used to investigate the stability of lizardite and chrysotile in the simplest multisystem that describes serpentinization. Phase diagrams for Mg serpentinites described by MgO-SiO/sub 2/-H/sub 2/O are constructed for systems of five, six and seven phases using dual networks. The seven-phase system brucite, forsterite, lizardite, chrysotile, antigorite, enstatite, and talc describes the serpentinization of Mg peridotites. The chrysotile asbestos deposits of southeastern Quebec occur in serpentinized peridotites of Ordovician ophiolites. The asbestos is localized in veins within blocks of partly serpentinized peridotite bounded by zones containing schistose serpentinite and granitic masses. A simple, rapid microscopic test was designed to obtain semi-quantitative measurements of the bending strength of acicular or fibrous crystals. The instrument was tested on samples of asbestiform tremolite from Baltimore, Maryland, and non-asbestiform tremolite from the Warren Head mine in New Hampshire. The samples ranged in size from 0.3 to 0.8 mm in length and 0.9 to 15 ..mu..m in diameter. The asbestiform tremolite was stronger than the non-asbestiform tremolite at every diameter, with an order of magnitude higher strength at small diameters. This indicates that asbestiform tremolite behaves as a whisker, whereas non-asbestiform tremolite does not.

  1. A statistical evaluation of asbestos air concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Lange, J.H. [Envirosafe Training and Consultants, Pittsburgh, PA (United States)

    1999-07-01

    Both area and personal air samples collected during an asbestos abatement project were matched and statistically analysed. Among the many parameters studied were fibre concentrations and their variability. Mean values for area and personal samples were 0.005 and 0.024 f cm{sup -}-{sup 3} of air, respectively. Summary values for area and personal samples suggest that exposures are low with no single exposure value exceeding the current OSHA TWA value of 0.1 f cm{sup -3} of air. Within- and between-worker analysis suggests that these data are homogeneous. Comparison of within- and between-worker values suggests that the exposure source and variability for abatement are more related to the process than individual practices. This supports the importance of control measures for abatement. Study results also suggest that area and personal samples are not statistically related, that is, there is no association observed for these two sampling methods when data are analysed by correlation or regression analysis. Personal samples were statistically higher in concentration than area samples. Area sampling cannot be used as a surrogate exposure for asbestos abatement workers. (author)

  2. Preparation of radiolabeled bioactive asbestos fibers

    Energy Technology Data Exchange (ETDEWEB)

    Tewson, T J; Francsechini, M P; Scheule, R K; Holian, A [Texas Univ., Houston, TX (USA). Health Science Center

    1991-01-01

    We have developed an efficient procedure to radiolabel asbestos fibers while retaining the bioactivity of the fibers. The fibers are labeled with {sup 68}Ge. The {sup 68}Ge decays into {sup 68}Ga, which then can be detected by its characteristic positron emission. Both chrysotile and crocidolite asbestos, a serpentine and an amphibole, respectively, were radiolabeled successfully. Mild reaction conditions and short reaction times were found under which {similar to}90% of the added {sup 68}Ge and {sup 68}Ga bound to the fibers. The radiolabel was retained even after washing the fibers extensively with physiologic buffers. The effects of the labeling on the bioactivity of the fibers were evaluated in an in vitro assay using guinea pig alveolar macrophages as a target cell. Labeled chrysotile fibers were found to retain >95% of their ability to stimulate these cells. The labeling procedure described in this study should be useful in preparing labeled fibers to investigate both in vitro and in vivo phenomena. (author).

  3. A statistical evaluation of asbestos air concentrations

    International Nuclear Information System (INIS)

    Lange, J.H.

    1999-01-01

    Both area and personal air samples collected during an asbestos abatement project were matched and statistically analysed. Among the many parameters studied were fibre concentrations and their variability. Mean values for area and personal samples were 0.005 and 0.024 f cm - - 3 of air, respectively. Summary values for area and personal samples suggest that exposures are low with no single exposure value exceeding the current OSHA TWA value of 0.1 f cm -3 of air. Within- and between-worker analysis suggests that these data are homogeneous. Comparison of within- and between-worker values suggests that the exposure source and variability for abatement are more related to the process than individual practices. This supports the importance of control measures for abatement. Study results also suggest that area and personal samples are not statistically related, that is, there is no association observed for these two sampling methods when data are analysed by correlation or regression analysis. Personal samples were statistically higher in concentration than area samples. Area sampling cannot be used as a surrogate exposure for asbestos abatement workers. (author)

  4. Evaluation of southern Quebec asbestos residues for CO{sub 2} sequestration by mineral carbonation : preliminary result

    Energy Technology Data Exchange (ETDEWEB)

    Huot, F. [Geo-conseils, Cap-Rouge, PQ (Canada); Beaudoin, G.; Hebert, R.; Constantin, M. [Laval Univ., Dept. of Geology and Geological Engineering, Quebec City, PQ (Canada); Bonin, G. [LAB Chrysotile Inc., Black Lake, PQ (Canada); Dipple, G.M. [British Columbia Univ., Vancouver, BC (Canada). Dept. of Earth and Ocean Sciences

    2003-07-01

    Carbon dioxide (CO{sub 2}) sequestration is one approach that can help reduce CO{sub 2} levels in the atmosphere. This paper discusses CO{sub 2} sequestration by mineral carbonation using ultramafic rock-hosted magnesian silicates (serpentine, olivine, talc). The carbonation process produces magnesite, which is a geologically stable and an environmentally safe magnesium carbonate. There are 3 potential CO{sub 2} sinks in southern Quebec that use such silicates. They are: (1) asbestos mill residues, (2) associated mine waste, and (3) ultramafic bedrock. Asbestos is extracted from serpentinized harzburgite located in the Thetford Mines and Asbestos ophiolitic massifs and also from the highly sheared Pennington Sheet. The physical and chemical properties of magnesium silicate deposits greatly determine their carbonation potential. A wide range of properties was observed in samples obtained from almost all asbestos mill residues and waste. The reaction which takes place depends on the mineral content. The kinetics of the reactions are influenced by humidity and grain size.

  5. Comparison of soil sampling and analytical methods for asbestos at the Sumas Mountain Asbestos Site—Working towards a toolbox for better assessment

    Science.gov (United States)

    Established soil sampling methods for asbestos are inadequate to support risk assessment and risk-based decision making at Superfund sites due to difficulties in detecting asbestos at low concentrations and difficulty in extrapolating soil concentrations to air concentrations. En...

  6. Evaluation for asbestos exposure in lung cancer surgery cases. Relationships between asbestos body count and pleural plaques and between asbestos body count and pulmonary fibrosis

    International Nuclear Information System (INIS)

    Yusa, Toshikazu; Yasukawa, Tomohisa; Shioda, Hironobu; Hirai, Fumiko; Hiroshima, Kenzo; Kishimoto, Takumi

    2011-01-01

    This study was designed to examine the significance of pleural plaques and pulmonary fibrosis in the evaluation of asbestos exposure level. The subjects were patients who had undergone surgery for lung cancer. There were 64 patients who had pleural plaques based on surgical findings (pleural plaque group) and 9 patients who had neither a history of asbestos exposure nor pleural plaque (control group). An examination was performed regarding the extent of pleural plaques and the presence or absence of pulmonary fibrosis. The relationships between these findings and the asbestos body count in the resected lung were investigated. If chest CT showed no pleural plaque, the case was classified as class 0. If chest CT showed pleural plaques, the CT slice with the most extensive pleural plaque in either side was selected. If the plaque extended to less than one quarter of the inner chest wall, the case was classified as class 1. If the extent was one quarter or more, the case was classified as class 2. The cases were considered to have pulmonary fibrosis if the fibrotic findings were equivalent to those of asbestosis of type 1 or more by chest X-ray photography (XP) and if fibrosis was observed in CT. All other cases were considered not to have pulmonary fibrosis. The median asbestos body counts were 1,018 bodies per gram of dried lung in the pleural plaque group and 263 per gram of dried lung in the control group. There was a statistically significant difference between these groups (p=0.0034). There were 25 patients with class 0 pleural plaque, 17 patients with class 1, and 22 patients with class 2. Their median asbestos body counts were 612, 439, and 5,626 bodies, respectively. All class 0 or 1 patients had an asbestos body count of less than 5,000 bodies. There was no significant difference in the counts between patients with class 0 and 1. All class 2 patients had an asbestos body count of 1,000 bodies or more. The count of class 2 patients was significantly higher

  7. Chrysotile asbestos quantification in serpentinite quarries: a case study in Valmalenco, central Alps, northern Italy

    Science.gov (United States)

    Cavallo, Alessandro

    2013-04-01

    Outcrops of serpentinites are usually strongly fractured and cataclastic, and the rock can only be used as ballast. However, in rare cases, like in Valmalenco (Central Alps, Northern Italy), fractures are regular and well spaced, and the rock mass has good geotechnical quality, ideal conditions for the extraction of dimension stone blocks. The Valmalenco Serpentinite is marketed worldwide as dimension and decorative stone, with remarkable mechanical properties and pleasing colours and textures. However, the same area was once subject to chrysotile asbestos mining, in the form of discrete veins along the main discontinuities of the rock mass. For this reason, airborne asbestos contamination can occur during the extraction and processing cycle of the rocks, therefore it is essential to locate and quantify asbestos in the rock mass, to reduce as much as possible the exposure risk. The first step was a detailed geostructural survey of each quarry, in order to characterize the main discontinuities (orientation, spacing, linear persistence, opening, filling), with special attention to the identification of fibrous minerals. The surveys was followed by extensive sampling of massive rocks, mineralized veins and fillings of fractures, and the cutting sludge derived from diamond wire cutting. Preliminary qualitative XRPD was performed on all samples, while quantitative analysis was carried out on the most representative samples of the main rock mass discontinuities. On the other hand, XRPD is not effective in the identification of asbestos percentages of less than 2% by weight, and the accurate distinction among the various serpentine polymorphs (antigorite, lizardite, chrysotile) is very difficult (if not impossible) when they are simultaneously present, due to their very similar basic structure and the strong structural disorder. The same samples were then analyzed by SEM-EDS (fiber counting after filtration on a polycarbonate filter), for a better distinction between

  8. Harbor Facility Locations - USACE IENC

    Data.gov (United States)

    Department of Homeland Security — These inland electronic Navigational charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...

  9. Substance Abuse Treatment Facility Locator

    Science.gov (United States)

    ... Joint Commission   National Committee for Quality Assurance Payment/Insurance/Funding Accepted All / None / Reverse   Access to recovery (ATR) voucher   County or local government funds   Community ...

  10. Mooring Facility Locations - USACE IENC

    Data.gov (United States)

    Department of Homeland Security — These inland electronic Navigational charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...

  11. The extent and influence of Asbestos Safety Awareness training among managers who had previously commissioned an asbestos survey in their workplace buildings

    OpenAIRE

    HICKEY, Jane; SAUNDERS, Jean; DAVERN, Peter

    2015-01-01

    A telephone survey was conducted among a sample of managers (n=30) in Ireland who had previously commissioned an asbestos survey in their workplace buildings. The aims of the telephone survey were to examine the extent to which managers had completed Asbestos Safety Awareness (ASA) training, and to assess how such training might influence (i) their instinctive thoughts on asbestos, and (ii) their approach to aspects of asbestos management within their buildings. Managers’ motivations for comm...

  12. Investigative studies for the use of an inactive asbestos mine as a disposal site for asbestos wastes.

    Science.gov (United States)

    Gidarakos, Evangelos; Anastasiadou, Kalliopi; Koumantakis, Emmanuil; Nikolaos, Stappas

    2008-05-30

    Although, according to European legislation the use of Asbestos Containing Materials is forbidden, many buildings in Greece still contain asbestos products, which must be removed at some point in the near future. Therefore, suitable disposal sites must be found within Greece, so that the unverified disposal of asbestos waste in municipal waste Landfills is brought to an end. In the present work, an innovative approach to the disposal problem of asbestos wastes in Greece has been examined, through a risk assessment analysis of the inactive asbestos mine of Northern Greece and an evaluation of its suitability as a disposal site for asbestos wastes in the future. According to the research carried out, two areas (Site 1 and Site 2) inside the mine area are suitable for the construction of a disposal site for asbestos wastes. The geological investigations showed that in Site 1 and Site 2 ultrabasic rocks of ophiolite complex were prevalent, which have been intensely serpentinized and converted into the fibrous shape of serpentine (asbestos). Concentrations of hazardous substances such as heavy metals in the soil of Site 1 and Site 2 oscillate at low levels, with the exception of the concentrations of nickel and chrome which are high. The investigative work also included the collection of meteorological data and the monitoring of the water level of the artificial lake, which has developed inside the open mine. The main aim is to safely dispose asbestos wastes inside the mine, to minimize any pollution of the wider vicinity of the mine, as well as to engage in restoration activities.

  13. Location | FNLCR Staging

    Science.gov (United States)

    The Frederick National Laboratory for Cancer Research campus is located 50 miles northwest of Washington, D.C., and 50 miles west of Baltimore, Maryland, in Frederick, Maryland. Satellite locations include leased and government facilities extending s

  14. 78 FR 29147 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2013-05-17

    ..., the reader is encouraged to refer to the interim rule governing this program, 24 CFR part 581. For... Comments: off-site removal only; 13,493 sf.; dining facility; deteriorating; asbestos Building 07636...

  15. Development of Asbestos - Free Brake Pad Using Bagasse

    Directory of Open Access Journals (Sweden)

    V. S. Aigbodion

    2010-03-01

    Full Text Available Development of asbestos-free brake pad using bagasse was investigated with a view to replace the use of asbestos whose dust is carcinogenic. The bagasse were sieve into sieve grades of 100, 150, 250, 350 and 710µm. the sieve bagasse was used in production of brake pad in ratio of 70%bagasse-30%resin using compression moulding. The properties examined are microstructure analysis, hardness, compressive strength, density, flame resistance, water and oil absorption. The microstructure reveals uniform distribution of resin in the bagasse. The results obtained showed that the finer the sieve size the better the properties. The results obtained in this work were compared with that of commercial brake pad (asbestos based and optimum formulation laboratory brake pad Palm Kernel Shell based (PKS, the results are in close agreement. Hence bagasse can be used in production of asbestos-free brake pad.

  16. Radiation pneumonitis in a patient exposed to asbestos

    International Nuclear Information System (INIS)

    Ashford, R.F.U.; Maher, J.; Drury, A.; Pickering, D.

    1981-01-01

    A case report is presented of a 58 year old man who had for many years run an asbestos importing and fibreizing plant. He developed radiation pneumonitis following radiotherapy to a squamous cell carcinoma of the middle 3rd of the oesophagus. Detailed lung studies at autopsy revealed asbestos bodies associated with macrophages in many alveoli and areas of subpleural fibrosis typical of asbestos exposure. This was the most florid case of radiation seen in the Westminster Hospital for some years and the first seen in patients treated for carcinoma of the oesophagus using a three field technique. It is suggested that when planning radiotherapy to an asbestos-exposed patient, a possible increase in lung sensitivity to radiation should be considered when planning dosage. (U.K.)

  17. The asbestos cement container and its characterization program

    International Nuclear Information System (INIS)

    Kertesz, C.; Oliver, J.; Jaouen, C.

    1986-01-01

    A new type of packing container is designed in France, by SGN, for the reprocessing wastes conditioning: the asbestos cement container (CAC) made by the industrial process for pipes fabrication. Two types of CAC are studied, differing from each other by their wall thickness. The technology of which SGN is in charge is presented. A characterization program is operated by CEA in view of satisfying to regulatory requirements. Emphasis is placed upon the radionuclides migration study, through different asbestos cement samples

  18. Health risk among asbestos cement sheet manufacturing workers in Thailand.

    Science.gov (United States)

    Phanprasit, Wantanee; Sujirarat, Dusit; Chaikittiporn, Chalermchai

    2009-12-01

    To assess asbestos exposure and calculate the relative risks of lung cancer among asbestos cement roof sheet workers and to predict the incidence rate of lung cancer caused by asbestos in Thailand. A cross-sectional study was conducted in four asbestos cement roof factories. Both area and personal air samples were collected and analyzed employing NIOSH method # 7400 and counting rule A for all procesess and activities. The time weight average exposures were calculated for each studied task using average area concentrations of the mill and personal concentrations. Then, cumulative exposures were estimated based on the past nation-wide air sampling concentrations and those from the present study. The relative risk (RR) of lung cancer among asbestos cement sheet workers was calculated and the number of asbestos related lung cancer case was estimated. The roof fitting polishers had the highest exposure to airborne asbestos fiber (0.73 fiber/ml). The highest average area concentration was at the conveyor to the de-bagger areas (0.02 fiber/ml). The estimated cumulative exposure for the workers performed studied-tasks ranged in between 90.13-115.65 fiber-years/ml while the relative risk of lung cancer calculated using US. EPA's model were 5.37-5.96. Based on the obtained RR, lung cancer among AC sheet in Thailand would be 2 case/year. In case that AC sheet will not be prohibited from being manufactured, even though only chrysotile is allowed, the surveillance system should be further developed and more seriously implemented. The better control measures for all processes must be implemented. Furthermore, due to the environmental persistence of asbestos fiber, its life cycle analysis should be conducted in order to control environmental exposure of general population.

  19. Asbestos and Gastrointestinal Cancer: A Review of the Literature

    OpenAIRE

    Morgan, Robert W.; Foliart, Donna E.; Wong, Otto

    1985-01-01

    Exposure to asbestos is among several factors cited as possible causes of esophageal, gastric and colorectal cancer. More than 45 published studies have presented mortality data on asbestos-exposed workers. For each cohort, we listed the observed and expected rates of deaths from types of gastrointestinal cancer based on the latest published follow-up. Summary standardized mortality ratios (SMRs) were then derived. Finally, we calculated summary SMRs for total gastrointestinal tract cancer fo...

  20. Estimating the increment of dose in members of the public due to discharges from norm facilities located in high background areas

    International Nuclear Information System (INIS)

    Lauria, Dejanira da Costa; Rochedo, Elaine R.R.

    2008-01-01

    Focusing on the environmental monitoring of a monazite facility located in a region which environmental media contain a large range of values of natural radionuclide concentration, this paper addresses the challenge of applying radiological protection standards to facilities when considering the heterogeneous radionuclides distribution in the environment. By side of the dose due immersion in its water, the conceptual model pointed out the lagoon water as the main route for the contamination of fish, milk and beef. However, in the lagoon watercourse the contents of 228 Ra and 226 Ra vary from 0.08 to 0.36 Bq/l and 0.12 to 1.52 Bq/l, respectively; additionally, natural variability on the content of the main radionuclides in food ranges, e.g., from 226 Ra and 0.01 to 0.60 Bq/l for 228 Ra in milk, and from 0.15 to 1.37 Bq/kg for 226 Ra and 0.20 to 2.88 Bq/kg for 228 Ra in fish. To comply with an optimised dose level below a dose constraint that is lower than the dose limit for the public, as defined in Brazilian standards, may be a difficult task as dose sums up over several different exposure pathways. The total natural variability, including several environmental pathways, such as external exposure and ingestion of water, milk and fish, is far larger (values ranging from 0.5 to 2.7 mSv/y) than the increment of dose to comply with (value of 0.3 mSy/y). (author)

  1. Preventive measures to eliminate asbestos-related diseases in singapore.

    Science.gov (United States)

    Lim, John Wah; Koh, David; Khim, Judy Sng Gek; Le, Giang Vinh; Takahashi, Ken

    2011-09-01

    The incidence of asbestos-related diseases (ARD) has increased in the last four decades. In view of the historical use of asbestos in Singapore since the country started banning it in phases in 1989 and the long latency of the disease, the incidence of ARD can be expected to increase further. As occupational exposure to asbestos still occurs, preventive measures to eliminate ARD continue to be required to protect the health of both workers and the public from asbestos exposure. The majority of occupational exposures to asbestos at present occur during the removal of old buildings. Preventive measures have been utilized by different government ministries and agencies in eliminating ARD in Singapore over the past 40 years. These measures have included the enforcement of legislation, substitution with safer materials, and engineering controls during asbestos removal as well as improvements in personal hygiene and the use of personal protective equipment. The existing Workman's Compensation System for ARD should be further refined, given that is currently stipulates that claims for asbestosis and malignant mesothelioma be made within 36 and 12 months after ceasing employment.

  2. Preventive Measures to Eliminate Asbestos-Related Diseases in Singapore

    Directory of Open Access Journals (Sweden)

    John Wah Lim

    2011-09-01

    Full Text Available The incidence of asbestos-related diseases (ARD has increased in the last four decades. In view of the historical use of asbestos in Singapore since the country started banning it in phases in 1989 and the long latency of the disease, the incidence of ARD can be expected to increase further. As occupational exposure to asbestos still occurs, preventive measures to eliminate ARD continue to be required to protect the health of both workers and the public from asbestos exposure. The majority of occupational exposures to asbestos at present occur during the removal of old buildings. Preventive measures have been utilized by different government ministries and agencies in eliminating ARD in Singapore over the past 40 years. These measures have included the enforcement of legislation, substitution with safer materials, and engineering controls during asbestos removal as well as improvements in personal hygiene and the use of personal protective equipment. The existing Workman’s Compensation System for ARD should be further refined, given that is currently stipulates that claims for asbestosis and malignant mesothelioma be made within 36 and 12 months after ceasing employment.

  3. Exposures to asbestos arising from bandsawing gasket material.

    Science.gov (United States)

    Fowler, D P

    2000-05-01

    A simulation of bandsawing sheet asbestos gasket material was performed as part of a retrospective exposure evaluation undertaken to assist in determining causation of a case of mesothelioma. The work was performed by bandsawing a chrysotile asbestos (80%)/neoprene gasket sheet with a conventional 16-inch woodworking bandsaw inside a chamber. Measurements of airborne asbestos were made using conventional area and personal sampling methods, with analysis of collected samples by transmission electron microscopy (TEM) and phase contrast microscopy (PCM). These were supplemented by qualitative scanning electron microscopy (SEM) examinations of some of the airborne particles collected on the filters. In contrast with findings from studies examining manual handling (installation and removal) of gaskets, airborne asbestos concentrations from this operation were found to be well above current Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) (eight-hour time-weighted average [TWA]) and excursion limit (30-minute) standards. Although some "encapsulation" effect of the neoprene matrix was seen on the particles in the airborne dust, unencapsulated individual fiber bundles were also seen. Suggestions for the implications of the work are given. In summary, the airborne asbestos concentrations arising from this work were quite high, and point to the need for careful observation of common sense precautions when manipulation of asbestos-containing materials (even those believed to have limited emissions potential) may involved machining operations.

  4. Experimental asbestos studies in the UK: 1912-1950.

    Science.gov (United States)

    Greenberg, Morris

    2017-11-01

    The asbestos industry originated in the UK in the 1870s. By 1898, asbestos had many applications and was reported to be one of the four leading causes of severe occupational disease. In 1912, the UK government sponsored an experimental study that reported that exposure to asbestos produced no more than a modicum of pulmonary fibrosis in guinea pigs. In the 1930s, the newly established Medical Research Council, with assistance from industry, sponsored a study of the effects of exposing animals to asbestos by injection (intratracheal and subcutaneous) and by inhalation in the factory environment. Government reports, publications, and contemporary records obtained by legal discovery have been reviewed in the context of the stage of scientific development and the history of the times. Experimenters were engaged in a learning process during the 1912-1950 period, and their reports of the effects of asbestos were inconsistent. Pathologists who studied the effects of asbestos experimentally, at whole animal, tissue and cellular levels, advanced experimental methodology and mechanistic knowledge. In the hands of public relations experts, however, research was exploited to preserve an industry and perpetuate preventable diseases, a practice that continues to this day. © 2017 Wiley Periodicals, Inc.

  5. [Railway use of asbestos-containing rubble: environmental hygienic aspects].

    Science.gov (United States)

    Kaptsov, V A; Kashanskiĭ, S V; Domnin, S G; Tikhova, T S; Trofimova, E V; Novoselova, T A; Bogdanov, G B

    2003-01-01

    The paper presents the results of a study of the gravimetric and counting concentrations of respirable asbestos fibers while working with sand-and-crushed stone mixtures, obtained from the concentration of chrysotile asbestos, at distances of 25, 50, and 100 m from the working place, as well as in a car saloon when the electric train passes along the area of these operations following an hour, a day, and a year after the completion of work, in warm and colds seasons of a year. It is concluded that the use of asbestos-containing sand-and-crushed stone mixtures on the railway leads to a higher anthropogenic asbestos load on the population living in the railway right-of-way, on railway workers and passengers. In this connection, it is necessary to evaluate risk factors of asbestos-induced diseases among the above contingents. The authors consider that due to the fact that asbestos-containing sand-and-crushed stone mixtures are well wetted with water, followed by the formation of a firm surface crust that prevents dust formation, as well as the short duration and rare frequency of operations relating their change, it is necessary to irrigate the repair areas with water or surfactant liquids after work termination.

  6. Laser-induced breakdown spectroscopy analysis of asbestos

    International Nuclear Information System (INIS)

    Caneve, L.; Colao, F.; Fabbri, F.; Fantoni, R.; Spizzichino, V.; Striber, J.

    2005-01-01

    Laser-induced breakdown spectroscopy was applied to test the possibility of detecting and identifying asbestos in different samples in view of the perspective at field operation without sample preparation which is peculiar to this technique. Several like-resin materials were first investigated by laser-induced breakdown spectroscopy, in order to find an asbestos container assuring safe laboratory operation during the material characterization aimed to identify indicators suitable for a quick identification on field. Successively, spectra of asbestos samples of both in serpentine and amphibole forms were measured and the variability in elemental composition was calculated from the emission spectra. Ratios of intensities of characteristic elements were tested as indicators for asbestos recognition. Laser-induced breakdown spectroscopy results were compared with those obtained by analyzing the same asbestos samples with a scanning electron microscopy equipped with an energy dispersive X-ray spectroscopy, a good correlation was found for Mg/Si and Fe/Si, thus showing the capability of laser-induced breakdown spectroscopy as a diagnostic tool for this category of materials. In particular, it was demonstrated that the method based on two indicators derived from laser-induced breakdown spectroscopy intensity ratios allows to discriminate between asbestos and cements in single shot measurements suitable to field operation

  7. Porcelain Factory Worker With Asbestos-related Mesothelioma

    Directory of Open Access Journals (Sweden)

    Meng-Ting Tsou

    2009-10-01

    Full Text Available Malignant mesothelioma is a rare tumor among the general population, but for people exposed to asbestos, the lifetime risk is high. A 58-year old man presented with suffering from chest pain, upper back pain, shortness of breath, and coughing that had continued for several months. A chest X-ray revealed right-side pleural effusion; however, pleural biopsy from drainage treatment confirmed a diagnosis of malignant mesothelioma. According to his occupational and environmental history, the patient had worked continuously in a porcelain factory for 30 years. The specific characteristics of his work, making asbestos wallboards and gaskets, entailed working in high-temperature conditions with a high fine-particle content in the atmosphere. The high working temperature caused asbestos debris and dust to fall down regularly from the wallboards, however, it was not until recently that the patient had started to wear personal protection. Asbestos is a significant source of hazardous exposure in old buildings, and this case serves as a reminder of the importance of asbestos-related exposure history, which facilitated the correct diagnosis of pulmonary malignant mesothelioma. Asbestos-containing materials that are now banned or regulated are still present in older buildings and remain an exposure hazard; they continue to be a serious health concern in many countries.

  8. Duality in constrained location problems

    DEFF Research Database (Denmark)

    Juel, Henrik; Love, Robert F.

    1987-01-01

    The dual of a facility location problem with general norms, distance constraints, and linear constraints is formulated.......The dual of a facility location problem with general norms, distance constraints, and linear constraints is formulated....

  9. Validation of the diagnosis of mesothelioma and BAP1 protein expression in a cohort of asbestos textile workers from Northern Italy.

    Science.gov (United States)

    Boffetta, P; Righi, L; Ciocan, C; Pelucchi, C; La Vecchia, C; Romano, C; Papotti, M; Pira, E

    2018-02-01

    Diagnosis of mesothelioma based on death certificate is subject to misclassification, which may bias the results of epidemiology studies. A high proportion of mesothelioma harbor mutations in the BRCA1-associated protein 1 (BAP1) gene. We searched medical and pathology records and specimens for 127 workers from a textile-asbestos factory in Italy who died during 1963-2013 with a diagnosis of pleural or peritoneal neoplasm or mesothelioma on death certificate, to confirm the diagnosis with immunohistochemistry markers. We calculated the odds ratio of confirmation by selected characteristics and asbestos exposure variables. When sufficient pathology material was available, we analyzed BAP1 protein expression. The diagnosis of mesothelioma was histologically confirmed for 35 cases (27.6%); 5 cases were classified as non-mesothelioma (3.9%), for 33 cases a mention of mesothelioma was found on record but no sufficient material was available for revision (26.0%); no records were available for 54 cases (death-certificate-only 42.5%). Diagnostic confirmation was not associated with sex, location of the neoplasm, age, or duration of employment; however, there was a significant association with time since first employment (P for linear trend 0.04). An association between duration of employment and time since first employment was observed for confirmed cases but not for death-certificate-only cases. BAP1 protein was lost in 18/35 cases (51.4%), without an association with sex, location, age, indices of asbestos exposure, or survival. We were able to confirm by immunohistochemistry a small proportion of mesothelioma diagnoses on certificates of deceased asbestos workers, and confirmation correlated with latency of asbestos exposure but not other characteristics. BAP1 protein loss is a frequent event in mesothelioma of asbestos-exposed workers, but does not correlate with exposure. © The Author 2017. Published by Oxford University Press on behalf of the European Society for

  10. [Croatian and international regulations on the protection and rights of workers exposed to asbestos at work].

    Science.gov (United States)

    Zavalić, Marija; Macan, Jelena

    2009-11-01

    New regulations on the protection and rights of workers occupationally exposed to asbestos were introduced in Croatia in 2007 and 2008. They have been harmonised with the European Union (EU) and International Labour Organization (ILO) regulations, and make a step forward in safety at work, health protection, social rights, and pension schemes for Croatian workers occupationally exposed to asbestos. The 2007 Croatian regulation on the protection of workers from the risks related to exposure to asbestos at work defines and describes activities in which workers can be occupationally exposed to asbestos, defines the threshold value of asbestos in the air at work, defines valid methods for measurement of asbestos concentrations in the air, and establishes measures to reduce asbestos exposure at work or protect the exposed workers. Croatian law regulating obligatory health surveillance of workers occupationally exposed to asbestos from year 2007 defines activities and competent authorities to implement health surveillance of workers occupationally exposed to asbestos and to diagnose occupational diseases related to asbestos. This law also defines "occupational exposure to asbestos", and "occupational asbestos-related diseases", including asbestosis (pulmonary asbestos-related fibrosis), pleural asbestos-related disorders (plaques, pleural thickening, and benign effusion), lung and bronchial cancer, and malignant mesothelioma of serous membranes. These regulations have been harmonised with ILO, Directive 2003/18/EC amending Council Directive 83/477/EEC on the protection of workers from the risks related to exposure to asbestos at work, and with the Commission Recommendation 2003/670/EC concerning the European schedule of occupational diseases. The 2008 Croatian regulation on conditions of health surveillance, diagnostic procedures and criteria for confirmation of occupational asbestos-related diseases "defines the terms and the content of medical examination of workers

  11. Asbestos exposure among transmission mechanics in automotive repair shops.

    Science.gov (United States)

    Salazar, Natalia; Cely-García, María Fernanda; Breysse, Patrick N; Ramos-Bonilla, Juan Pablo

    2015-04-01

    Asbestos has been used in a broad variety of industrial products, including clutch discs of the transmission system of vehicles. Studies conducted in high-income countries that have analyzed personal asbestos exposures of transmission mechanics have concluded that these workers are exposed to asbestos concentrations in compliance with the US Occupational Safety and Health Administration (US OSHA) occupational standards. Clutch facings are the friction component of clutch discs. If clutch facings are sold separated from the support, they require manipulation before installation in the vehicle. The manipulation of asbestos containing clutch facings is performed by a group of mechanics known as riveters, and includes drilling, countersinking, riveting, sanding, and occasionally grinding, tasks that can potentially release asbestos fibers, exposing the mechanics. These manipulation activities are not reported in studies conducted in high-income countries. This study analyzes personal asbestos exposures of transmission mechanics that manipulate clutch facings. Air sampling campaigns in two transmission repair shops (TRS) were conducted in November 2012 and July 2013 in Bogotá, Colombia. Four workers employed in these TRS were sampled (i.e. three riveters and one supervisor). Personal samples (n = 39), short-term personal samples (n = 49), area samples (n = 52), blank samples (n = 8), and background samples (n = 2) were collected in both TRS during 3-5 consecutive days, following US National Institute for Occupational Safety and Health (US NIOSH) methods 7400 and 7402. Asbestos samples were analyzed by an American Industrial Hygiene Association accredited laboratory. On at least one of the days sampled, all riveters were exposed to asbestos concentrations that exceeded the US OSHA permissible exposure limit or the Colombian permissible limit value. Additionally, from the forty-seven 30-min short-term personal samples collected, two (4.3%) exceeded the US OSHA excursion

  12. Recycling of asbestos tailings used as reinforcing fillers in polypropylene based composites.

    Science.gov (United States)

    Zhai, Wensi; Wang, Yao; Deng, Yuan; Gao, Hongli; Lin, Zhen; Li, Mao

    2014-04-15

    In this work, asbestos tailings were recycled and used as reinforcing fillers to enhance the mechanical properties of polypropylene (PP). A silane coupling agent was used to chemically modify the asbestos tailings to increase the compatibility between asbestos tailings and polypropylene matrix. Both raw and chemically treated asbestos tailings with different loading levels (from 3 to 30 wt%) were utilized to fabricate composites. Mechanical properties of these composites have been investigated by dynamic mechanical analysis, tensile test and notched impact test. Results showed that hybridization of asbestos tailings in the composites enhanced the mechanical properties of neat PP evidently, and treated asbestos tailings/PP composites yielded even better mechanical properties compared with those of raw asbestos tailings/PP composites. This recycling method of asbestos tailings not only reduces disposal costs and avoids secondary pollution but also produces a new PP-based composite material with enhanced mechanical properties. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Releasability of asbestos fibers from weathered roof cement.

    Science.gov (United States)

    Oberta, Andrew F; Poye, Lee; Compton, Steven P

    2018-03-26

    Chrysotile asbestos fibers were added to roofing products, including roof cement, for several decades. The fibers were described as "encapsulated" and therefore incapable of being released, an assertion that is disproved by the study reported herein. Three test panels of roof cement from the original container were exposed to ambient weathering in 2015 and 2016. Two panels were then sampled using the ASTM D5755 microvacuum method. Sampling revealed a light brown sub-layer under the dark brown surface layer, both of which crumbled and became friable during sampling. Analysis of the microvacuum samples with transmission electron microscopy showed that the material on the two panels contained 4,432,000 and 3,320,000 asbestos structures per cm² with nearly all of the structures consisting of fibers less than 5 µm long. Energy dispersive spectrometry determined that none of the fibers reported were coated with asphalt. The presence of free fibers were confirmed by direct examination of the surfaces of the panels and of dust released from handling the panels via scanning electron microscopy. This study confirmed the releasability of uncoated asbestos fibers from dried roof cement that was indicated in two previous studies published in 2007 and 2010. These results suggest that the finding of the 5th Circuit Court in 1997 that uncoated airborne asbestos fibers cannot be released from roof cement, and therefore do not present a potential exposure by inhalation, was erroneous in retrospect. Theexemption of roof cement from regulation under the Occupational Safety and Health Administration Construction Industry Standard for asbestos by the Court should not be relied on by employers of workers who remove weathered asbestos-containing roof cement, and precautions should be taken against exposure to airborne asbestos fibers during this work.

  14. 40 CFR 427.40 - Applicability; description of the asbestos paper (elastomeric binder) subcategory.

    Science.gov (United States)

    2010-07-01

    ... asbestos paper (elastomeric binder) subcategory. 427.40 Section 427.40 Protection of Environment... SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.40 Applicability; description of the asbestos paper (elastomeric binder) subcategory. The provisions of this subpart are applicable to...

  15. ENGINEERING CONTROL PRACTICES FOR REDUCING EMISSIONS DURING DRILLING OF ASBESTOS-CONTAINING FLOORING MATERIALS

    Science.gov (United States)

    This report describes the implementation and testing of control measures to reduce airborne asbestos generated by the drilling of asbestos-containing flooring materials, an OSHA Class III asbestos maintenance activity. Bosch 11224 and 11222 rotary drills were fitted with shrouds ...

  16. ASBESTOS EXPOSURES DURING ROUTINE FLOOR TILE MAINTENANCE. PART 1: SPRAY-BUFFING AND WET-STRIPPING

    Science.gov (United States)

    This study was conducted to ealuate airborne asbestos concentrations during spray-uffing and wet-stripping of asbestos-containing residient floor tile under three levels of floor conditions (poor, medium, and good). Airborne asbestos concentrations were measured by transmission e...

  17. 40 CFR 61.149 - Standard for waste disposal for asbestos mills.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standard for waste disposal for asbestos mills. 61.149 Section 61.149 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Standard for Asbestos § 61.149 Standard for waste disposal for asbestos mills. Each owner or operator of...

  18. Transnational Dynamics Amid Poor Regulations: Taiwan’s Asbestos Ban Actions and Experiences

    Directory of Open Access Journals (Sweden)

    Harry Yi-Jui Wu

    2017-10-01

    Full Text Available This article describes the history of the asbestos use regulation process in Taiwan and the associated factors leading to its total ban in 2018. Despite the long history of asbestos mining and manufacturing since the Japanese colonial period, attempts to understand the impact of asbestos on the health of the population and to control its use did not emerge until the early 1980s. We attempted to investigate the driving forces and obstructions involved in asbestos regulations by reviewing available public sources and scientific journal articles and conducting interviews with key propagators of the asbestos regulation and ban. Correlation between asbestos exposure and asbestos-related diseases has already been established; however, authorities have been unable to effectively regulate the extensive application of asbestos in various light industries that support economic growth since the 1960s. More stringent regulations on asbestos use in industries and an eventual ban were caused indirectly by appeals made by visionary scholars and healthcare professionals but also due to the subsidence of asbestos-related industries. With the elucidation of factors that affect asbestos regulation and ban, a thorough long-term healthcare plan for the neglected victims of asbestos-related diseases and upstream measures for policy change must be developed.

  19. A Management Guide to Asbestos: Medico-Legal, Regulatory, and Hazard Abatement Considerations

    Science.gov (United States)

    1986-08-01

    of the medical hazards of asbestos exposure. Essentially, plaintiffs suffer from a failure of the courts to apply the doctrine of collateral estoppel ...93-114. Brennan, Troyen A, "Collateral Estoppel in Asbestos Litigation." Environmental Law 14 (1983): 197-222. Brodeur, Paul. ’The Asbestos

  20. Evaluation of asbestos exposure within the automotive repair industry: a study involving removal of asbestos-containing body sealants and drive clutch replacement.

    Science.gov (United States)

    Blake, Charles L; Dotson, G Scott; Harbison, Raymond D

    2008-12-01

    Two independent assessments were performed of airborne asbestos concentrations generated during automotive repair work on vintage vehicles . The first involved removal of asbestos-containing seam sealant, and the second involved servicing of a drive clutch. Despite the relatively high concentrations (5.6-28%) of chrysotile fibers detected within bulk samples of seam sealant, the average asbestos concentration for personal breathing zone (PBZ) samples during seam sealant removal was 0.006 f/cc (fibers/cubic centimeter of air). Many other air samples contained asbestos at or below the analytical limit of detection (LOD). Pneumatic chiseling of the sealant material during removal resulted in 69% of area air samples containing asbestos. Use of this impact tool liberated more asbestos than hand scraping. Asbestos fibers were only detected in air samples collected during the installation of a replacement clutch. The highest asbestos corrected airborne fiber concentration observed during clutch installation was 0.0028 f/cc. This value is approximately 100 times lower than Occupational Safety and Health Administration's (OSHA) permissible exposure limit (PEL) of 0.1f/cc. The airborne asbestos concentrations observed during the servicing of vintage vehicles with asbestos-containing seam sealant and clutches are comparable to levels reported for repair work involving brake components and gaskets.

  1. Electromagnetic mixed waste processing system for asbestos decontamination

    International Nuclear Information System (INIS)

    Kasevich, R.S.; Nocito, T.; Vaux, W.G.; Snyder, T.

    1994-01-01

    DOE sites contain a broad spectrum of asbestos materials (cloth, pipe lagging, sprayed insulation and other substances) which are contaminated with a combination of hazardous and radioactive wastes due to its use during the development of the US nuclear weapons complex. These wastes consist of cutting oils, lubricants, solvents, PCBs, heavy metals and radioactive contaminants. The radioactive contaminants are the activation, decay, and fission products of DOE operations. To allow disposal, the asbestos must be converted chemically, followed by removing and separating the hazardous and radioactive materials to prevent the formation of mixed wastes and to allow for both sanitary disposal and effective decontamination. Currently, no technology exists that can meet these sanitary and other objectives. An attempt was made to apply techniques that have already proved successful in the mining, oil, and metals processing industries to the development of a multi-stage process to remove and separate hazardous chemical radioactive materials from asbestos. This process uses three methods: ABCOV chemicals which converts the asbestos to a sanitary waste; dielectric heating to volatilize the organic materials; and electrochemical processing for the removal of heavy metals, RCRA wastes and radionuclides. This process will result in the destruction of over 99% of the asbestos; limit radioactive metal contamination to 0.2 Bq alpha per gram and 1 Bq beta and gamma per gram; reduce hazardous organics to levels compatible with current EPA policy for RCRA delisting; and achieve TCLP limits for all solidified waste

  2. Asbestos removal and disposal information system: a user's guide

    International Nuclear Information System (INIS)

    Knight, P.S.; Eisenhower, B.M.

    1982-10-01

    Program ASBS01, written for the staff of the Department of Environmental Management (DEM) at Oak Ridge National Laboratory (ORNL), is an on-line management information system that provides file maintenance and information retrievability for demolition and/or renovation operations involving friable (capable of becoming an airborne health hazard) asbestos material at the Laboratory. System 1022 is the data base management system used. The screen processor SCOPE provides the DEM staff with system prompts for ease of use and data integrity. Data for the system comes from two UCN forms: (1) Notice of Intention to Demolish or Renovate Friable Asbestos Material (UCN-13385) and (2) Request for the Disposal of Asbestos or Material Containing Asbestos (UCN-13386). Examples of the forms are in Appendix A. Data is entered into the system as requests are submitted to DEM. Total amounts of friable asbestos removed in demolition and/or renovation operations can be generated by the program upon user request. These totals are submitted in a quarterly report to the Environmental Protection Branch of the US Department of Energy (DOE) on a continuing basis (see Appendix B). This report describes the operation of the computer program ASBS01 from data entry to generation of totals. Each data attribute of the master file ASBSTO.DMS is described in detail, and a sample session is given for user reference

  3. [Investigations and review of literature relating to carcinogenesis. I. Communication: Cancer from asbestos, schistosomiasis, and cicatrization (author's transl)].

    Science.gov (United States)

    Brand, G; Brand, I

    1980-06-01

    This review covers the following aspects: Cancer associated with asbestos and other fibers: Epidemiology. - Cancer types and location (mesothelioma; bronchogenic carcinoma; cancer of the upper respiratory tract; abdominal cancer). - Experimental asbestos cancer. - Other kinds of fibers and cancer (wool and cotton; glass; talc; others). - Cancer determining or influencing factors (individual predisposition; species susceptibility; type of material; shape and size of fibers; smoking). - Preneoplastic signs in man (fibrosis; ferruginous bodies; pleural plaques; milky spots). - Preneoplastic development in animals. - Fiber effects on cell cultures (macrophages; fibroblasts). Cancer associated with schistosomiasis: Epidemiology. - Patient age and cancer latency. - Pathology. - Foreign body reaction and preneoplastic development. Scar cancer. Foreign body cancer: In man. - Experimental (species differences in susceptibility; individual genetic differences in tumor incidence and latency; influence of sex, age, nutrition; tumor histopathology and ultrastructure; tumor growth, invasiveness, metastases, transplantability, immunology; search for tumor viruses). - Properties of foreign body materials in relation to tumorigenicity (chemical and physical properties; size and shape; surface properties; porosity). - Investigations and findings concerning the origin of foreign body sarcomas (the foreign body reaction; search for foci of tumor origin; an analytical method; monoclonal tumor origin; heterogenicity of carcinogenic events; surface dependency; identification of originator cells; time and location of the emergence of tumor originator cells; the carcinogenic initiation event; surface-independent and dependent preneoplastic maturation; the carcinogenic role of the foreign body). - Earlier hypotheses and theories in the light of new experimental findings. The results of experimental foreign body tumorigenesis in relation to foreign body-, asbestos-, schistosomiasis-, and

  4. WTO confidential: the case of asbestos.

    Science.gov (United States)

    Castleman, Barry

    2003-01-01

    The World Trade Organization (WTO), established in 1995, adjudicates "trade disputes" between member nations in cases with human rights, cultural, environmental, and public health significance. Throughout the resolution process and even after a case's conclusion, little of what happens is made accessible to the public. However, it is one thing to criticize the WTO for its lack of transparency from outside the process and another to critically examine what was withheld from disclosure and what dangers that presents. This is the inside story from a scientific adviser to one party in a WTO case, who analyzes what happened from a public health point of view. The analysis concludes that the public health justification for banning asbestos was accepted in the end by WTO economists, despite the WTO's bias in favor of the party (Canada) making the free trade challenge (to public health legislation), despite the WTO's lack of expertise in science, medicine, engineering, and public health, and despite important erroneous statements made to the WTO under the cover of confidentiality. The case nevertheless illustrates that the WTO's threat to national sovereignty could never withstand the light of day if the limitations and dangers of the process were open for all to see.

  5. 77 FR 44262 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2012-07-27

    ....; office; major repairs required; extensive mold & asbestos located beneath the bldg.; remediation required... Service Admin. complex; mold and lead identified; historic property. Utah 2 Buildings 9160 N. Hwy 83...

  6. Asbestos exposure-cigarette smoking interactions among shipyard workers

    International Nuclear Information System (INIS)

    Blanc, P.D.; Golden, J.A.; Gamsu, G.; Aberle, D.R.; Gold, W.M.

    1988-01-01

    The authors studied the roentgenograms, pulmonary function tests, and physical findings of 294 shipyard workers to evaluate asbestos exposure-cigarette smoking interactions. Roentgenographic parenchymal opacities, decreased pulmonary diffusing capacity for carbon monoxide, decreased flow at low lung volume, rales, and clubbing were each significantly related to the number of years elapsed since first exposure to asbestos and cigarette smoking status when analyzed by logistic regression. A dose-dependent cigarette smoking response that was consistent with synergism was present only for parenchymal opacities and decreased flow at low lung volume. These findings suggest that decreased flow at low lung volume, possibly reflecting peribronchiolar fibrosis, may be a functional corollary to smoking-associated parenchymal roentgenographic opacities among some asbestos-exposed individuals

  7. [Comparative carcinogenic properties of basalt fiber and chrysotile-asbestos].

    Science.gov (United States)

    Nikitina, O V; Kogan, F M; Vanchugova, N N; Frash, V N

    1989-01-01

    In order to eliminate asbestos adverse effect on workers' health it was necessary to use mineral rayon, primarily basalt fibre, instead of asbestos. During a chronic experiment on animals the oncogenicity of 2 kinds of basalt fibre was studied compared to chrysotile asbestos. The dust dose of 25 mg was twice administered by intraperitonial route. All types of dust induced the onset of intraperitonial mesotheliomas but neoplasm rates were significantly lower in the groups exposed to basalt fibre. There was no credible data on the differences between the groups exposed to various types of basalt fibre. Since the latter produced some oncogenic effect, it was necessary to develop a complex of antidust measures, fully corresponding to the measures adopted for carcinogenic dusts.

  8. Structural and microstructural aspects of asbestos-cement waste vitrification

    Science.gov (United States)

    Iwaszko, Józef; Zawada, Anna; Przerada, Iwona; Lubas, Małgorzata

    2018-04-01

    The main goal of the work was to evaluate the vitrification process of asbestos-cement waste (ACW). A mixture of 50 wt% ACW and 50 wt% glass cullet was melted in an electric furnace at 1400 °C for 90 min and then cast into a steel mold. The vitrified product was subjected to annealing. Optical microscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) were used to evaluate the effects of the vitrification. The chemical constitution of the material before and after the vitrification process was also analyzed. It was found that the vitrified product has an amorphous structure in which the components of asbestos-cement waste are incorporated. MIR spectroscopy showed that the absorption bands of chrysotile completely disappeared after the vitrification process. The results of the spectroscopic studies were confirmed by X-ray studies - no diffraction reflections from the chrysotile crystallographic planes were observed. As a result of the treatment, the fibrous asbestos construction, the main cause of its pathogenic properties, completely disappeared. The vitrified material was characterized by higher resistance to ion leaching in an aquatic environment than ACW and a smaller volume of nearly 72% in relation to the apparent volume of the substrates. The research has confirmed the high effectiveness of vitrification in neutralizing hazardous waste containing asbestos and the FT-IR spectroscopy was found to be useful to identify asbestos varieties and visualizing changes caused by the vitrification process. The work also presents the current situation regarding the utilization of asbestos-containing products.

  9. Temporal trend, geographic distribution, and publication quality in asbestos research.

    Science.gov (United States)

    Ugolini, Donatella; Bonassi, Stefano; Cristaudo, Alfonso; Leoncini, Giacomo; Ratto, Giovanni Battista; Neri, Monica

    2015-05-01

    Asbestos is a well-known cause of cancer and respiratory diseases. The aim of the current study was to investigate the scientific production in asbestos research evaluating temporal trend, geographic distribution, impact factor (IF) of published literature, and taking into account socioeconomic variables. The PubMed database was searched starting from 1970. Publication numbers and IF were evaluated as absolute values and after standardization by population and gross domestic product (GDP). Six thousand nine hundred seven articles related to asbestos were retrieved. Publications grew steeply in the 1970s, leveled off in the 1980s, decreased in the 1990s, and then increased again. Mesothelioma, lung neoplasms, and occupational diseases are the most commonly used keywords. In the period of 1988-2011, 4220 citations were retrieved, 3187 of whom had an impact factor. The US, Italy, and the UK were the most productive countries. European countries published about 20 % more asbestos-related articles than the US, although the latter reached a higher mean IF, ranking second after Australia. When the national scientific production (sum of IF) was compared taking into account socioeconomic variables, Australia and Scandinavian countries performed very well, opposite to all main asbestos producers like Russia, China, and Brazil (except for Canada). The American Journal of Industrial Medicine and the Italian La Medicina del Lavoro published the highest numbers of articles. This study provides the first bibliometric analysis of scientific production in asbestos research. Interest appears to be higher in selected countries, with strong national features, and is growing again in the new millennium.

  10. Worldwide asbestos supply and consumption trends from 1900 to 2000

    Science.gov (United States)

    Virta, Robert L.

    2003-01-01

    The use of asbestos is one of the most controversial issues surrounding the industrial minerals industry. Its carcinogenic nature, an overall lack of knowledge of minimum safe exposure levels, its widespread use for more than 100 years, and the long latency for the development of lung cancer and mesothelioma are the main contributing factors to these controversies. Another factor is that, despite decades of research, the mechanisms responsible for its carcinogenic properties are still largely unknown. The United States has produced about 3.28 million metric tons of asbestos fiber and used approximately 31.5 million tons between 1900 and 2000. About half of this amount was used since 1960. Cumulative world production during that same time period was about 173 million tons. Assuming that unusually large stocks are not maintained and that world consumption roughly equals production, about half of the world production and consumption occurred since 1976. The United States and western European nations were the largest consumers of asbestos during the first two-thirds of the 20th century. They were surpassed by the collective production and consumption of States within the former Soviet Union by the 1970s. With the onset of the health issues concerning asbestos in the late 1960s and early 1970s, world production and consumption began to decline during the 1980s. In 2000, world consumption, estimated to be 1.48 million tons, was only 31% that of 1980. Countries in Asia, South America, and the former Soviet Union remain the largest users of asbestos. More specifically, Brazil, China, India, Japan, Russia, and Thailand are the only countries that consumed more than 60,000 tons of asbestos in 2000. These six countries accounted for more than 80% of world?s apparent consumption in 2000.

  11. Electromagnetic mixed waste processing system for asbestos decontamination

    International Nuclear Information System (INIS)

    Kasevich, R.S.; Vaux, W.G.; Nocito, T.

    1995-01-01

    DOE sites contain a broad spectrum of asbestos materials (cloth, pipe lagging, sprayed insulation and other substances) which are contaminated with a combination of hazardous and radioactive wastes due to its use during the development of the U.S. nuclear weapons complex. These wastes consist of cutting oils, lubricants, solvents, PCB's, heavy metals and radioactive contaminants. The radioactive contaminants are the activation, decay and fission products of DOE operations. The asbestos must be converted by removing and separating the hazardous and radioactive materials to prevent the formation of mixed wastes and to allow for both sanitary disposal and effective decontamination. Currently, no technology exists that can meet these sanitary and other objectives

  12. Asbestos Ban in Italy: A Major Milestone, Not the Final Cut

    Directory of Open Access Journals (Sweden)

    Daniela Marsili

    2017-11-01

    Full Text Available Background and history: Italy was the main asbestos producer and one of the greatest consumers in 20th century Europe until the asbestos ban was introduced in 1992. Asbestos exposure affected the population in a wide range of working environments, namely mining and marketing of asbestos, asbestos cement production, shipyards and textile industries. This also determined a widespread environmental asbestos exposure affecting the surrounding communities. Methods: To investigate the drivers and difficulties of the process leading to the asbestos ban and its subsequent implementation, we focused on stakeholder involvement, environmental health policies, capacity building and communication. Results: In the past three decades, stakeholder involvement has been instrumental in advancing the industrial asbestos replacement process, prevention and remediation interventions. Furthermore, involvement also contributed to the integration of environmental and health policies at national, regional and local levels, including capacity building and communication. In a global public health perspective, international scientific cooperation has been established with countries using and producing asbestos. Discussion and Conclusions: Key factors and lessons learnt in Italy from both successful and ineffective asbestos policies are described to support the relevant stakeholders in countries still using asbestos contributing to the termination of its use.

  13. Development of an automated asbestos counting software based on fluorescence microscopy.

    Science.gov (United States)

    Alexandrov, Maxym; Ichida, Etsuko; Nishimura, Tomoki; Aoki, Kousuke; Ishida, Takenori; Hirota, Ryuichi; Ikeda, Takeshi; Kawasaki, Tetsuo; Kuroda, Akio

    2015-01-01

    An emerging alternative to the commonly used analytical methods for asbestos analysis is fluorescence microscopy (FM), which relies on highly specific asbestos-binding probes to distinguish asbestos from interfering non-asbestos fibers. However, all types of microscopic asbestos analysis require laborious examination of large number of fields of view and are prone to subjective errors and large variability between asbestos counts by different analysts and laboratories. A possible solution to these problems is automated counting of asbestos fibers by image analysis software, which would lower the cost and increase the reliability of asbestos testing. This study seeks to develop a fiber recognition and counting software for FM-based asbestos analysis. We discuss the main features of the developed software and the results of its testing. Software testing showed good correlation between automated and manual counts for the samples with medium and high fiber concentrations. At low fiber concentrations, the automated counts were less accurate, leading us to implement correction mode for automated counts. While the full automation of asbestos analysis would require further improvements in accuracy of fiber identification, the developed software could already assist professional asbestos analysts and record detailed fiber dimensions for the use in epidemiological research.

  14. Gallium scanning in differentiating malignant from benign asbestos-related pleural disease

    International Nuclear Information System (INIS)

    Teirstein, A.S.; Chahinian, P.; Goldsmith, S.J.; Sorek, M.

    1986-01-01

    In order to assess the utility of 67gallium citrate in delineating malignant pleural mesothelioma from benign asbestos-related pleural disease, 49 patients with malignant mesothelioma and 16 with benign asbestos-related pleural disease were studied. Seven patients with malignant mesothelioma had no history of asbestos exposure, while the remaining 58 patients were exposed. Forty-three of the 49 patients (88%) with malignant mesothelioma had a positive 67gallium scan including 36 of the 42 (86%) patients with asbestos exposure and all 7 patients without a history of asbestos exposure. Three of 16 patients (19%) with benign asbestos-related pleural disease had a positive scan. 67Gallium radionuclide imaging is nonspecific but may be valuable in noninvasive monitoring of asbestos-exposed populations, which have a high risk for the late development of benign and/or malignant pleural disease

  15. The extent and influence of Asbestos Safety Awareness training among managers who had previously commissioned an asbestos survey in their workplace buildings.

    Science.gov (United States)

    Hickey, Jane; Saunders, Jean; Davern, Peter

    2015-01-01

    A telephone survey was conducted among a sample of managers (n=30) in Ireland who had previously commissioned an asbestos survey in their workplace buildings. The aims of the telephone survey were to examine the extent to which managers had completed Asbestos Safety Awareness (ASA) training, and to assess how such training might influence (i) their instinctive thoughts on asbestos, and (ii) their approach to aspects of asbestos management within their buildings. Managers' motivations for commissioning the asbestos survey were also identified. The study found that ASA-trained managers (n=11) were not significantly more likely to work in larger organisations or in organisations which operated an accredited management system. Though ASA-trained managers' instinctive thoughts on asbestos were of a slightly poorer technical quality compared with those of non-ASA-trained managers, they were still significantly more cognisant of their responsibilities towards those of their employees at specific risk of asbestos exposure. Most managers (n=28) commissioned the asbestos survey to satisfy a pre-requisite of external contractors for commencing refurbishment/demolition work in their buildings. Given its potential to positively influence the occupational management of asbestos, the authors recommend the general promotion of suitably tailored ASA-training programmes among building managers and external contractors alike.

  16. Worldwide Asbestos Supply and Consumption Trends from 1900 through 2003

    Science.gov (United States)

    Virta, Robert L.

    2006-01-01

    This Circular updates and supersedes U.S. Geological Survey (USGS) Open-File Report 03–083, "Worldwide Asbestos Supply and Consumption Trends from 1900 to 2000," with the addition of supply and consumption estimates and analysis from 2001 through 2003 and revisions to the consumption estimates for 1998 through 2000. The text from Open-File Report 03–083 also has been updated in this Circular to include revisions to and expansion of the time-series coverage. The use of asbestos is one of the most controversial issues surrounding the industrial minerals industry. Its carcinogenic nature, an overall lack of knowledge of minimum safe exposure levels, its widespread use for more than 100 years, and the long latency for the development of lung cancer and mesothelioma are the main contributing factors to these controversies. Another factor is that, despite decades of research, the mechanisms responsible for its carcinogenic properties are still largely unknown. The United States produced about 3.29 million metric tons (Mt) of asbestos and used approximately 31.5 Mt between 1900 and 2003. About half of this amount was used after 1960. In 2002, the last asbestos mine in the United States closed, marking the end of more than 110 years of U.S. asbestos production. Cumulative world production from 1900 through 2003 was about 181 Mt. If one assumes that unusually large stocks were not maintained and that world consumption roughly equaled production, then about half of the world production and consumption occurred between the end of 1976 and the end of 2003. The United States and Western European nations were the largest consumers of asbestos during the first two-thirds of the 20th century. They were surpassed by the collective production and consumption of Kazakhstan and Russia by the 1970s. After the onset of the health issues concerning asbestos in the late 1960s and early 1970s, the decline in world production and consumption began to be evident in the late 1970s and

  17. Licensed Healthcare Facilities

    Data.gov (United States)

    California Natural Resource Agency — The Licensed Healthcare Facilities point layer represents the locations of all healthcare facilities licensed by the State of California, Department of Health...

  18. AFRICOM: Does Location Matter?

    Science.gov (United States)

    2009-03-01

    Decision Model,” 242-244. 26 Susan Hesse Owen & Mark S. Daskin , “Strategic Facility Location: A Review,” European Journal of Operational Research...Susan Hesse & Mark S. Daskin . “Strategic Facility Location: A Review,” European Journal of Operational Research 111 (1998), 423-447. Paye-Layeleh...ES) N/ A 10. SPONSORING/MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The views expressed in this thesis are those of the author and

  19. Spirometry: a predictor of lung cancer among asbestos workers.

    Science.gov (United States)

    Świątkowska, Beata; Szeszenia-Dąbrowska, Neonila

    2017-01-01

    The significance of lung function as an independent risk factor for lung cancer remains unclear. The objective of the study is to answer the question if spirometry can identify patients at risk for lung cancer among people occupationally exposed to asbestos dust in the past. In order to identify a group of individuals with the highest risk of lung cancer incidence based on lung function levels of FEV 1 % predicted value, we examined 6882 subjects enrolled in the health surveillance program for asbestos related diseases over the years 2000-2014. We found a total of 110 cases confirmed as primary lung cancer. Using Cox's proportional hazards model after adjustment for age, gender, number of cigarettes, duration of smoking and cumulative asbestos exposure, we estimated that compared with the subjects with FEV 1 ≥90% pred, the HR of lung cancer was 1.40 (95%CI: 0.94-2.08) for the subjects with FEV 1 less than 90% and 1.95 (HR = 1.86; 95%CI: 1.12-3.08) for those with FEV 1 less than 70%. In addition, probability of the occurrence of lung cancer for FEV 1 spirometry and cancer diagnosis was three years or less. The results strongly support the hypothesis that spirometry can identify patients at a risk of lung cancer development. Regular spirometry should be offered to all patients with a history of asbestos exposure, at least once every three years.

  20. Electromagnetic mixed-waste processing system for asbestos decontamination

    International Nuclear Information System (INIS)

    1995-04-01

    The first phase of a program to develop and demonstrate a cost-effective, integrated process for remediation of asbestos-containing material that is contaminated with organics, heavy metals, and radioactive compounds was successfully completed. Laboratory scale tests were performed to demonstrate initial process viability for asbestos conversion, organics removal, and radionuclide and heavy metal removal. All success criteria for the laboratory tests were met. (1) Ohio DSI demonstrated greater than 99% asbestos conversion to amorphous solids using their commercial process. (2) KAI demonstrated 90% removal of organics from the asbestos suspension. (3) Westinghouse STC achieved the required metals removal criteria on a laboratory scale (e.g., 92% removal of uranium from solution, resin loadings of 0.6 equivalents per liter, and greater than 50% regeneration of resin in a batch test.) Using the information gained in the laboratory tests, the process was reconfigured to provide the basis for the mixed waste remediation system. An integrated process is conceptually developed, and a Phase 2 program plan is proposed to provide the bench-scale development needed in order to refine the design basis for a pilot processing system

  1. ASBESTOS PIPE-INSULATION REMOVAL ROBOT SYSTEM; FINAL

    International Nuclear Information System (INIS)

    Unknown

    2000-01-01

    This final topical report details the development, experimentation and field-testing activities for a robotic asbestos pipe-insulation removal robot system developed for use within the DOE's weapon complex as part of their ER and WM program, as well as in industrial abatement. The engineering development, regulatory compliance, cost-benefit and field-trial experiences gathered through this program are summarized

  2. Asbestos exposure in Israel: findings, issues and needs

    Energy Technology Data Exchange (ETDEWEB)

    Richter, E.D.

    1984-02-01

    In Israel, since the 1950s, at least several thousand workers, their wives and children, and possibly many others, have been or still may be exposed to hazardous amounts of airborne asbestos fibers. These are found both in asbestos-based industries (asbestos cement, textiles and brake linings) and trades with asbestos exposure (construction, shipyard repair, boiler maintenance, insulation work). These people are at increased risk for disability or illness, or for premature death from asbestosis, from lung cancer, from exacerbation of preexisting respiratory disease (especially if they smoke), from mesothelioma, from gastrointestinal cancer, and from other malignancies. Although there has been progress, much still has to be done in the areas of legislation, standard setting, exposure control, technology, surveillance, smoking cessation, and medical care and follow-up. Compensation is needed to care for those workers currently or previously exposed, as well as for their families and others at risk. A national policy for protecting and caring for those formerly or currently exposed is indicated by the review of the situation in Israel.

  3. Airborne fibre and asbestos concentrations in system built schools

    Science.gov (United States)

    Burdett, Garry; Cottrell, Steve; Taylor, Catherine

    2009-02-01

    This paper summarises the airborne fibre concentration data measured in system built schools that contained asbestos insulation board (AIB) enclosed in the support columns by a protective steel casing. The particular focus of this work was the CLASP (Consortium of Local Authorities Special Programme) system buildings. A variety of air monitoring tests were carried out to assess the potential for fibres to be released into the classroom. A peak release testing protocol was adopted that involved static sampling, while simulating direct impact disturbances to selected columns. This was carried out before remediation, after sealing gaps and holes in and around the casing visible in the room (i.e. below ceiling level) and additionally round the tops of the columns, which extended into the suspended ceiling void. Simulated and actual measurements of worker exposures were also undertaken, while sealing columns, carrying out cleaning and maintenance work in the ceiling voids. Routine analysis of these air samples was carried out by phase contrast microscopy (PCM) with a limited amount of analytical transmission electron microscopy (TEM) analysis to confirm whether the fibres visible by PCM were asbestos or non-asbestos. The PCM fibre concentrations data from the peak release tests showed that while direct releases of fibres to the room air can occur from gaps and holes in and around the column casings, sealing is an effective way of minimising releases to below the limit of quantification (0.01 f/ml) of the PCM method for some 95% of the tests carried out. Sealing with silicone filler and taping any gaps and seams visible on the column casing in the room, also gave concentrations below the limit of quantification (LOQ) of the PCM method for 95% of the tests carried out. The data available did not show any significant difference between the PCM fibre concentrations in the room air for columns that had or had not been sealed in the ceiling void, as well as in the room

  4. Airborne fibre and asbestos concentrations in system built schools

    International Nuclear Information System (INIS)

    Burdett, Garry; Cottrell, Steve; Taylor, Catherine

    2009-01-01

    This paper summarises the airborne fibre concentration data measured in system built schools that contained asbestos insulation board (AIB) enclosed in the support columns by a protective steel casing. The particular focus of this work was the CLASP (Consortium of Local Authorities Special Programme) system buildings. A variety of air monitoring tests were carried out to assess the potential for fibres to be released into the classroom. A peak release testing protocol was adopted that involved static sampling, while simulating direct impact disturbances to selected columns. This was carried out before remediation, after sealing gaps and holes in and around the casing visible in the room (i.e. below ceiling level) and additionally round the tops of the columns, which extended into the suspended ceiling void. Simulated and actual measurements of worker exposures were also undertaken, while sealing columns, carrying out cleaning and maintenance work in the ceiling voids. Routine analysis of these air samples was carried out by phase contrast microscopy (PCM) with a limited amount of analytical transmission electron microscopy (TEM) analysis to confirm whether the fibres visible by PCM were asbestos or non-asbestos. The PCM fibre concentrations data from the peak release tests showed that while direct releases of fibres to the room air can occur from gaps and holes in and around the column casings, sealing is an effective way of minimising releases to below the limit of quantification (0.01 f/ml) of the PCM method for some 95% of the tests carried out. Sealing with silicone filler and taping any gaps and seams visible on the column casing in the room, also gave concentrations below the limit of quantification (LOQ) of the PCM method for 95% of the tests carried out. The data available did not show any significant difference between the PCM fibre concentrations in the room air for columns that had or had not been sealed in the ceiling void, as well as in the room

  5. Exposure to asbestos and levels of selected tumor biomarkers

    International Nuclear Information System (INIS)

    Krajewska, B.; Lutz, W.; Pilacik, B.

    1996-01-01

    Occupational exposure to asbestos, a recognised carcinogen, poses a risk for such diseases as asbestosis, lung cancer and mesothelioma. It is thought that asbestos fibres may damage microphages which undergo neoplastic transformation as well as fibroblast, while partial phagocytosis may generate free oxygenic radicals which induce cellular peroxidase and damage macromolecules. Neoplastic biomarkers such as tissue polypeptide antigen (TPA) or carcinoembryonic antigen (CEA) are now used for this purpose. The aim of the work was to identify workers exposed to asbestos in the population, especially high risk groups neoplastic diseases and to evaluate the usefulness of TPA and CEA determinations. The study covered a group of asbestos exposed workers (n = 4000 and the control group of workers (n = 135) nonexposed to any toxic factor at work. Age, exposure time, smoking habits and workpost characteristics were taken into consideration in the analysis of the results. It was revealed that in 38 persons exposed to asbestos, TPA values were above the concentration limit set on the basis of studies carried out in the control group, and elevated CEA values applied to 13 persons. Significant differences between groups under study were found in the proportion of pathological TPA values. Such a relationship was not observed in regard to CEA values. In the exposed group the results also indicated an evident effect of age and exposure time on the number of persons with TPA values above concentration limit. The effect of smoking on the frequency of pathological TPA values was also clear-cut in workers exposed to asbestos. Taking into account three types of employment, the analysis indicated significant differences in TPA values between blue collar workers and other personnel; and between white collar workers and other personnel. This means a similar percentage of pathological TPA values in the group of blue collar and white collar workers. The study carried out allowed to identify

  6. Australia’s Ongoing Legacy of Asbestos: Significant Challenges Remain Even after the Complete Banning of Asbestos Almost Fifteen Years Ago

    Science.gov (United States)

    Soeberg, Matthew; Vallance, Deborah A.; Keena, Victoria

    2018-01-01

    The most effective way of reducing the global burden of asbestos-related diseases is through the implementation of asbestos bans and minimising occupational and non-occupational exposure to respirable asbestos fibres. Australia’s asbestos consumption peaked in the 1970s with Australia widely thought to have had among the highest per-capita asbestos consumption level of any country. Australia’s discontinuation of all forms of asbestos and asbestos-containing products and materials did not occur at a single point of time. Crocidolite consumption ceased in the late 1960s, followed by amosite consumption stopping in the mid 1980s. Despite significant government reports being published in 1990 and 1999, it was not until the end of 2003 that a complete ban on all forms of asbestos (crocidolite, amosite, and chrysotile) was introduced in Australia. The sustained efforts of trade unions and non-governmental organisations were essential in forcing the Australian government to finally implement the 2003 asbestos ban. Trade unions and non-government organisations continue to play a key role today in monitoring the government’s response to Australian asbestos-related disease epidemic. There are significant challenges that remain in Australia, despite a complete asbestos ban being implemented almost fifteen years ago. The Australian epidemic of asbestos-related disease has only now reached its peak. A total of 16,679 people were newly diagnosed with malignant mesothelioma between 1982 and 2016, with 84% of cases occurring in men. There has been a stabilisation of the age-standardised malignant mesothelioma incidence rate in the last 10 years. In 2016, the incidence rate per 100,000 was 2.5 using the Australian standard population and 1.3 using the Segi world standard population. Despite Australia’s complete asbestos ban being in place since 2003, public health efforts must continue to focus on preventing the devastating effects of avoidable asbestos-related diseases

  7. Exposure of UK industrial plumbers to asbestos, Part II: Awareness and responses of plumbers to working with asbestos during a survey in parallel with personal sampling.

    Science.gov (United States)

    Bard, Delphine; Burdett, Garry

    2007-03-01

    Throughout the European Union, millions tonnes of asbestos were used in the manufacture of products for building and for industrial installations. Today, in the UK, it is estimated that over half a million non-domestic premises alone have asbestos-containing materials in them and it is recognized that those working in building maintenance trades continue to be at significant risk. In part II, the awareness of UK plumbers to when they are working with asbestos was investigated and compared with the monitored levels reported in part I. The plumbers were issued by post with passive samplers, activity logs to monitor a working week and a questionnaire. The activity logs were used to assess whether maintenance workers were knowingly or unknowingly exposed to airborne asbestos fibres during a course of a working week. The questionnaire was designed to gather information on their: age, employment status, current and past perception of the frequency which they work with asbestos and knowledge of the precautions that should be taken to limit exposure and risk. Approximately 20% of workers reported on the sample log that they had worked with asbestos. There was a high correlation (93%) between the sampling log replies that they were knowingly working with asbestos and measured asbestos on the passive sampler. However, some 60% of the samples had >5 microm long asbestos structures found by transmission electron microscopy (TEM) analysis suggesting that the plumbers were aware of about only one-third of their contacts with asbestos materials throughout the week. This increased to just over one half of the plumbers being aware of their contact based on the results for phase contrast microscopy (PCM) countable asbestos fibres. The results from the questionnaire found that over half of the plumbers replying thought that they disturb asbestos only once a year and 90% of them thought they would work with asbestos for<10 h year-1. Their expectations and awareness of work with

  8. OccIDEAS: An Innovative Tool to Assess Past Asbestos Exposure in the Australian Mesothelioma Registry

    Directory of Open Access Journals (Sweden)

    Ewan MacFarlane

    2012-03-01

    Full Text Available Malignant mesothelioma is an uncommon but rapidly fatal disease for which the principal aetiological agent is exposure to asbestos. Mesothelioma is of particular significance in Australia where asbestos use was very widespread from the 1950s until the 1980s. Exposure to asbestos includes occupational exposure associated with working with asbestos or in workplaces where asbestos is used and also ‘take-home’ exposure of family members of asbestos exposed workers. Asbestos exposure may also be nonoccupational, occurring as a consequence of using asbestos products in non-occupational contexts and passive exposure is also possible, such as exposure to asbestos products in the built environment or proximity to an environmental source of exposure, for example an asbestos production plant. The extremely long latency period for this disease makes exposure assessment problematic in the context of a mesothelioma registry. OccIDEAS, a recently developed online tool for retrospective exposure assessment, has been adapted for use in the Australian Mesothelioma Registry (AMR to enable systematic retrospective exposure assessment of consenting cases. Twelve occupational questionnaire modules and one non-occupational module have been developed for the AMR, which form the basis of structured interviews using OccIDEAS, which also stores collected data and provides a framework for generating metrics of exposure.

  9. Requirements Doc for Refurb of JASPER Facility in B131HB

    Energy Technology Data Exchange (ETDEWEB)

    Knittel, Kenn M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-01-25

    The Joint Actinide Shock Physics Experimental Research (JASPER) Program target fabrication facility is currently located in building 131 (B131) of the Lawrence Livermore National Laboratory (LLNL). A portion of this current facility has been committed to another program as part of a larger effort to consolidate LLNL capabilities into newer facilities. This facility assembles precision targets for scientific studies at the Nevada National Security Site (NNSS). B131 is also going through a modernization project to upgrade the infrastructure and abate asbestos. These activities will interrupt the continuous target fabrication efforts for the JASPER Program. Several options are explored to meet the above conflicting requirements, with the final recommendation to prepare a new facility for JASPER target fabrication operations before modernization efforts begin in the current facility assigned to JASPER. This recommendation fits within all schedule constraints and minimizes the disruption to the JASPER Program. This option is not without risk, as it requires moving an aged, precision coordinate measuring machine, which is essential to the JASPER Program’s success. The selected option balances the risk to the machine with continuity of operations.

  10. Tracing surface water infiltration in fractured rocks with environmental isotopes: a case study of the former Balangero asbestos mine (northern Italy)

    Energy Technology Data Exchange (ETDEWEB)

    Sacchi, Elisa [University of Pavia, Via Ferrata 1, Pavia I-27100 (Italy); Bergamini, Massimo; Castellano, Gianpaolo [R.S.A. S.r.l, Viale Copperi 15, Balangero - TO, I-10070 (Italy); Barella, Vittorio [ISO4 S.n.c., Via Valperga Caluso 37, Torino I-10125 (Italy)

    2013-07-01

    A semi-quantitative evaluation of the contribution of lake water to streams, springs, and groundwater circulating in the fractured rocks hosting the former Balangero asbestos mine was performed using stable isotopes of the water molecule. Results indicate that the lake, located in the open pit of the mine, generally contributes less than 30% of water to streams, springs, and groundwater. This contribution is more evident during dry periods, and should be taken into account in the design of remediation plans. (authors)

  11. Asbestos exposure and health hazards: a global emergency, Epidemiological evidence and denial theories

    Directory of Open Access Journals (Sweden)

    Francesca Zazzara

    2013-11-01

    Full Text Available On June 3rd 2013, in Turin, Italy, the Swiss industrialist Schmidheiny has been sentenced to 18 years imprisonment for intentional disaster for 3,000 asbestos-linked tumours in Italian workers at cement multinational Eternit. The indiscriminate use of asbestos, however, continues worldwide. Although many studies have shown that asbestos is associated with an increased risk of mortality and morbidity, denial theories were spread over time, showing how the logic of profit governs the production of asbestos. We examined the history of the epidemiological evidence of asbestos related risks and, second, the main sources of exposure in Italy and in the world, occupational, non-occupational, and post-disaster exposure (as occurred after L’Aquila earthquake in April 2009. The theme of inequality and social justice is ever so alarming in the fight against asbestos and its lobbies.

  12. Asbestos Utilization Costs on the Example of Functioning Landfill of Hazardous Waste

    Science.gov (United States)

    Polek, Daria

    2017-12-01

    Asbestos is a trademark of mineral fibres, which are the natural minerals found in nature. Products containing asbestos fibres, in accordance with the national and EU legislation, are covered by the production prohibition and forced to be removed. In Poland, the asbestos removal process started with the adaptation of the EU law by the Council of Ministers Treatment Program of the National Asbestos for the years 2009-2032. The purpose of the dissertation was to analyse the costs associated with the disposal of the costs of collection, transport and disposal of waste. Methodology consisted in obtaining information on the raw materials needed to produce asbestos sheets. The analysis allowed us to determine the asbestos removal cost and include state subsidies in the calculations.

  13. Environmental safety case and cement-related issues for intermediate-level waste in a co-located geological disposal facility

    International Nuclear Information System (INIS)

    Norris, Simon; Williams, Steve

    2012-01-01

    Simon Norris of the NDA described safety case and cement-related issues for a geological disposal facility for ILW. The Environmental Safety Case (ESC) needs to demonstrate a clear understanding of: - The disposal facility in its geological setting. - How the disposal system will evolve. - How the various components of system (including cementitious materials) contribute to meeting the requirement of providing a safe long-term solution for the disposed wastes. The ESC must include and support the key environmental safety arguments with underpinning lines of reasoning and detailed analysis, assessments and supporting evidence (including those relating to cementitious materials). In an ILW disposal system, cementitious materials could be used in several ways: - As in-package grouting materials and package materials. - Backfill material. - Shotcrete and other vault lining technologies that could be employed during construction and operation. - Engineered seals. - Structural materials. Given that cementitious materials will play important roles in the disposal system - and within a general strategy for managing uncertainty - the NDA is conducting, or has recently conducted, research into the following topics: - Assessment of the potential for interactions between disposal modules for low- and intermediate-level wastes and for HLW and spent fuel. - The effect of possible cementitious vault liners (e.g. composed from shotcrete) on the early post-closure evolution of waste-derived gas in a geological disposal facility for low- and intermediate-level wastes. - The evolution of cementitious backfill materials, including cracking, and related evolution of groundwater flow and chemistry in the vault environment of a geological disposal facility. - Evidence from nature and archaeology relevant to the long-term properties of cement. - Interaction of waste-derived gas (particularly carbon-14 bearing gas) with cementitious materials in the facility near-field. - The choice of in

  14. Influence of calcium carbonate on the decomposition of asbestos contained in end-of-life products

    International Nuclear Information System (INIS)

    Belardi, G.; Piga, L.

    2013-01-01

    Highlights: • We characterized end-of-life asbestos-containing materials. • In the range 620–680 °C, calcite and quartz affect decomposition of asbestos. • Hypothesized decomposition reactions match with solid phases revealed by XRD analysis. • TGA of the content of chrysotile gives good results both in air and in nitrogen. - Abstract: Three bearing-asbestos wastes, friction material, vinyl-asbestos (linoleum) and cement-asbestos mainly containing chrysotile were characterized. Powder X-ray diffraction (XRDP), scanning electron microscopy (SEM) with microanalysis observations and thermal analysis (TGA/DTA) were carried out on the materials as received and after heating at 1100 °C in order to observe their structural changes and thermal behaviours. A quantitative determination of chrysotile in the friction material was also carried out. To study the influence of CaCO 3 on the decomposition of asbestos, the three techniques were also applied on the linoleum and cement-asbestos at room temperature and at 1100 °C after leaching of the materials with 1:3 HCl to remove the carbonates present in the wastes. The results show that the presence of CaCO 3 prevents the asbestos to decompose according to the known decomposition reactions and leads to the formation of calcium-silicate compounds. When CaCO 3 is removed by washing with HCl, decomposition of asbestos proceeds according to the expected reactions

  15. Lung Function Profiles among Individuals with Nonmalignant Asbestos-related Disorders

    Directory of Open Access Journals (Sweden)

    Eun-Kee Park

    2014-12-01

    Conclusion: Lung function measurement differs in individuals with different ARDs. Monitoring of lung function among asbestos-exposed populations is a simple means of facilitating earlier interventions.

  16. Technology Demonstration of Wet Abrasive Blasting for Removal of Lead- and Asbestos-Containing Paint

    National Research Council Canada - National Science Library

    Race, Timothy

    2003-01-01

    ...). This technology demonstration showed that wet blasting using an engineered abrasive can safely and effectively remove lead- and asbestos-containing paint from exterior concrete masonry unit walls...

  17. Influence of calcium carbonate on the decomposition of asbestos contained in end-of-life products

    Energy Technology Data Exchange (ETDEWEB)

    Belardi, G. [Environmental Geology and GeoEngineering Institute (CNR), Area della ricerca RM1, via Salaria km 29,300, 00016 Monterotondo (Rome) (Italy); Piga, L., E-mail: luigi.piga@uniroma1.it [Department of Chemical Engineering, Materials and Environment, Sapienza University of Rome, via Eudossiana 84, 00184 Rome (Italy)

    2013-12-10

    Highlights: • We characterized end-of-life asbestos-containing materials. • In the range 620–680 °C, calcite and quartz affect decomposition of asbestos. • Hypothesized decomposition reactions match with solid phases revealed by XRD analysis. • TGA of the content of chrysotile gives good results both in air and in nitrogen. - Abstract: Three bearing-asbestos wastes, friction material, vinyl-asbestos (linoleum) and cement-asbestos mainly containing chrysotile were characterized. Powder X-ray diffraction (XRDP), scanning electron microscopy (SEM) with microanalysis observations and thermal analysis (TGA/DTA) were carried out on the materials as received and after heating at 1100 °C in order to observe their structural changes and thermal behaviours. A quantitative determination of chrysotile in the friction material was also carried out. To study the influence of CaCO{sub 3} on the decomposition of asbestos, the three techniques were also applied on the linoleum and cement-asbestos at room temperature and at 1100 °C after leaching of the materials with 1:3 HCl to remove the carbonates present in the wastes. The results show that the presence of CaCO{sub 3} prevents the asbestos to decompose according to the known decomposition reactions and leads to the formation of calcium-silicate compounds. When CaCO{sub 3} is removed by washing with HCl, decomposition of asbestos proceeds according to the expected reactions.

  18. Logistic Problem Connected with Removing Asbestos as Dangerous Waste from Terrains of Country Communes

    Science.gov (United States)

    Parkitny, Waldemar; Wojcik, Weronika; Generowicz, Agnieszka

    2017-12-01

    Asbestos is a common term referring to certain mineral groups having the form of fibers with a length to fibre diameter of at least 100: 1. The specific properties of asbestos - flammability, mechanical strength and thermal and flexibility - meant that asbestos has been widely used in various types of industrial technologies. It is classified as hazardous waste and therefore requires special methods for collection, export and disposal. The article proposes a model of logistics exports of asbestos from selected villages, in order to guarantee the shortest route, while maintaining the ecological safety and the rules of transportation of hazardous waste.

  19. Naturally occurring asbestos-A recurring public policy challenge

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R.J.; Strohmeier, B.R. [RJ Lee Group, Inc., 350 Hochberg Road, Monroeville, PA 15146 (United States); Bunker, K.L. [RJ Lee Group, Inc., 350 Hochberg Road, Monroeville, PA 15146 (United States)], E-mail: klbunker@rjlg.com; Van Orden, D.R. [RJ Lee Group, Inc., 350 Hochberg Road, Monroeville, PA 15146 (United States)

    2008-05-01

    The potential environmental hazards and associated public health issues related to exposure to respirable dusts from the vicinity of natural in-place asbestos deposits (commonly referred to as naturally occurring asbestos, NOA) have gained the regulatory and media spotlight in many areas around the United States, such as Libby, MT, Fairfax County, VA, and El Dorado Hills, CA, among others. NOA deposits may be present in a variety of geologic formations. It has been suggested that airborne asbestos may be released from NOA deposits, and absent appropriate engineering controls, may pose a potential health hazard if these rocks are crushed or exposed to natural weathering and erosion or to human activities that create dust. The issue that needs to be addressed at a policy level is the method of assessing exposures to elongated rock fragments ubiquitous in dust clouds in these same environments and the associated risk. Elongated rock fragments and single crystal minerals present in NOA have been construed by some as having attributes, including the health effects, of asbestos fibers. However, the Occupational Safety and Health Administration (OSHA), Mine Safety and Health Administration (MSHA), and the Consumer Products Safety Commission (CPSC) found that the scientific evidence did not support this assumption. As in many environmental fields of study, the evidence is often disputed. Regulatory policy is not uniform on the subject of rock fragments, even within single agencies. The core of the issue is whether the risk parameters associated with exposures to commercial asbestos can or should be applied to rock fragments meeting an arbitrary set of particle dimensions used for counting asbestos fibers. Inappropriate inclusion of particles or fragments results in dilution of risk and needless expenditure of resources. On the other hand, inappropriate exclusion of particles or fragments may result in increased and unnecessary risk. Some of the fastest growing counties in

  20. Electromagnetic mixed waste processing system for asbestos decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Kasevich, R.S. [KAI Technologies, Inc., Portsmouth, NH (United States); Vaux, W.G. [Westinghouse Electric Corp., Pittsburgh, PA (United States); Nocito, T. [Ohio DSI Corp., New York (United States)

    1995-10-01

    DOE sites contain a broad spectrum of asbestos materials (cloth, pipe lagging, sprayed insulation and other substances) which are contaminated with a combination of hazardous and radioactive wastes due to its use during the development of the U.S. nuclear weapons complex. These wastes consist of cutting oils, lubricants, solvents, PCB`s, heavy metals and radioactive contaminants. The radioactive contaminants are the activation, decay and fission products of DOE operations. The asbestos must be converted by removing and separating the hazardous and radioactive materials to prevent the formation of mixed wastes and to allow for both sanitary disposal and effective decontamination. Currently, no technology exists that can meet these sanitary and other objectives.

  1. Naturally occurring asbestos-A recurring public policy challenge

    International Nuclear Information System (INIS)

    Lee, R.J.; Strohmeier, B.R.; Bunker, K.L.; Van Orden, D.R.

    2008-01-01

    The potential environmental hazards and associated public health issues related to exposure to respirable dusts from the vicinity of natural in-place asbestos deposits (commonly referred to as naturally occurring asbestos, NOA) have gained the regulatory and media spotlight in many areas around the United States, such as Libby, MT, Fairfax County, VA, and El Dorado Hills, CA, among others. NOA deposits may be present in a variety of geologic formations. It has been suggested that airborne asbestos may be released from NOA deposits, and absent appropriate engineering controls, may pose a potential health hazard if these rocks are crushed or exposed to natural weathering and erosion or to human activities that create dust. The issue that needs to be addressed at a policy level is the method of assessing exposures to elongated rock fragments ubiquitous in dust clouds in these same environments and the associated risk. Elongated rock fragments and single crystal minerals present in NOA have been construed by some as having attributes, including the health effects, of asbestos fibers. However, the Occupational Safety and Health Administration (OSHA), Mine Safety and Health Administration (MSHA), and the Consumer Products Safety Commission (CPSC) found that the scientific evidence did not support this assumption. As in many environmental fields of study, the evidence is often disputed. Regulatory policy is not uniform on the subject of rock fragments, even within single agencies. The core of the issue is whether the risk parameters associated with exposures to commercial asbestos can or should be applied to rock fragments meeting an arbitrary set of particle dimensions used for counting asbestos fibers. Inappropriate inclusion of particles or fragments results in dilution of risk and needless expenditure of resources. On the other hand, inappropriate exclusion of particles or fragments may result in increased and unnecessary risk. Some of the fastest growing counties in

  2. Naturally occurring asbestos: a recurring public policy challenge.

    Science.gov (United States)

    Lee, R J; Strohmeier, B R; Bunker, K L; Van Orden, D R

    2008-05-01

    The potential environmental hazards and associated public health issues related to exposure to respirable dusts from the vicinity of natural in-place asbestos deposits (commonly referred to as naturally occurring asbestos, NOA) have gained the regulatory and media spotlight in many areas around the United States, such as Libby, MT, Fairfax County, VA, and El Dorado Hills, CA, among others. NOA deposits may be present in a variety of geologic formations. It has been suggested that airborne asbestos may be released from NOA deposits, and absent appropriate engineering controls, may pose a potential health hazard if these rocks are crushed or exposed to natural weathering and erosion or to human activities that create dust. The issue that needs to be addressed at a policy level is the method of assessing exposures to elongated rock fragments ubiquitous in dust clouds in these same environments and the associated risk. Elongated rock fragments and single crystal minerals present in NOA have been construed by some as having attributes, including the health effects, of asbestos fibers. However, the Occupational Safety and Health Administration (OSHA), Mine Safety and Health Administration (MSHA), and the Consumer Products Safety Commission (CPSC) found that the scientific evidence did not support this assumption. As in many environmental fields of study, the evidence is often disputed. Regulatory policy is not uniform on the subject of rock fragments, even within single agencies. The core of the issue is whether the risk parameters associated with exposures to commercial asbestos can or should be applied to rock fragments meeting an arbitrary set of particle dimensions used for counting asbestos fibers. Inappropriate inclusion of particles or fragments results in dilution of risk and needless expenditure of resources. On the other hand, inappropriate exclusion of particles or fragments may result in increased and unnecessary risk. Some of the fastest growing counties in

  3. Mesothelioma mortality surveillance and asbestos exposure tracking in Italy

    Directory of Open Access Journals (Sweden)

    Lucia Fazzo

    2012-01-01

    Full Text Available INTRODUCTION: Spatial distribution of mortality from pleural mesothelioma (which in the ICD-10 Revision has a specific code: C45.0 in Italy for the period 2003-2009 is described. Previous mortality studies at national level employed the topographic code "Malignant neoplasms of pleura", because of unavailability of a specific code in ICD-9 Revision for pleural mesothelioma. METHODS: Standardized mortality ratios were computed for all municipalities, using each regional population as reference; for municipalities in Regions with rate higher than the national rate, the latter has been used as reference. SMRs were computed specifically also for each Italian Polluted Sites "of national concern for environmental remediation" (IPS with asbestos exposure sources, composed by one or more municipalities, using regional rate as reference. Spatial Scan Statistics procedure, using SatScan software, was applied in cluster analysis: the country was divided into geographic macro-areas and the relative risks (RR express the ratio of risk within the cluster to the risk of the macro-area outside the cluster. Clusters with p-value < 0.10 were selected. RESULTS: The national standardized annual mortality rate was 1.7 cases per 100 000. Several areas with evident burden of asbestos-related disease were detected. Significant clusters were found in correspondence to asbestos-cement industries (e.g. Casale Monferrato, women: RR = 28.7, shipyards (e.g. Trieste, men: RR = 4.8, petrochemical industries (e.g. Priolo, men: RR = 6.9 and a stone quarry contaminated by fluoro-edenite fibres (Biancavilla, women: RR = 25.9. Some of the increased clusters correspond to IPS. CONCLUSIONS: The results may contribute to detect asbestos exposure and to set priorites for environmental remediation.

  4. Nuclear dismantling and asbestos elimination: the same challenge?

    International Nuclear Information System (INIS)

    Dadoumont, J.; Deboodt, P.

    1998-01-01

    The ALARA principle constitutes a powerful tool for workers dosimetry management in the nuclear field. A consequence of the application of this principle could be an accentuation of the nuclear risk face to the industrial risk. Using works of asbestos elimination in nuclear medium, the present article examines how a generalization of the utilization of the ALARA principle is conceivable and how the existing obstacles could be removed. (N.C.)

  5. The impact of asbestos exposure in Swedish construction workers.

    Science.gov (United States)

    Järvholm, Bengt; Englund, Anders

    2014-01-01

    To study the occurrence of pleural mesothelioma as a measure of the impact on health from asbestos exposure in the construction industry. The occurrence of pleural mesothelioma in different occupations, time periods and birth cohorts was studied in a cohort of construction workers. They were prospectively followed after they had participated in health examinations between 1971 and 1993. The analysis was restricted to men and in total 367,568 men was included in the analysis. In total there were 419 cases of pleural mesotheliomas between 1972 and 2009. As expected the age adjusted incidence was high in insulation workers and plumbers (39 and 16 cases per 100,000 person-years, respectively). However, only 21% of the pleural mesotheliomas occurred in those occupational groups. Occupational groups with many cases of pleural mesothelioma were concrete workers (N = 56), wood workers (N = 55), painters (N = 32), electricians (N = 48), and foremen (N = 37). The highest risk was in birth cohorts born between 1935 and 1945. Between 1995 and 2009 around one-third of all male cases in the country occurred in this birth cohort. The risk seemed to decrease considerably in men born after 1955. In Sweden a considerable proportion of pleural mesotheliomas occur among construction workers; and not only in jobs traditionally associated with asbestos exposure such as insulators and plumbers but also among electricians, for example. The results shows that asbestos exposure occurs in many occupational groups, indicating that safe handling of asbestos is a very difficult or even impossible task in the construction industry. © 2013 Wiley Periodicals, Inc.

  6. Confidence Intervals for Asbestos Fiber Counts: Approximate Negative Binomial Distribution.

    Science.gov (United States)

    Bartley, David; Slaven, James; Harper, Martin

    2017-03-01

    The negative binomial distribution is adopted for analyzing asbestos fiber counts so as to account for both the sampling errors in capturing only a finite number of fibers and the inevitable human variation in identifying and counting sampled fibers. A simple approximation to this distribution is developed for the derivation of quantiles and approximate confidence limits. The success of the approximation depends critically on the use of Stirling's expansion to sufficient order, on exact normalization of the approximating distribution, on reasonable perturbation of quantities from the normal distribution, and on accurately approximating sums by inverse-trapezoidal integration. Accuracy of the approximation developed is checked through simulation and also by comparison to traditional approximate confidence intervals in the specific case that the negative binomial distribution approaches the Poisson distribution. The resulting statistics are shown to relate directly to early research into the accuracy of asbestos sampling and analysis. Uncertainty in estimating mean asbestos fiber concentrations given only a single count is derived. Decision limits (limits of detection) and detection limits are considered for controlling false-positive and false-negative detection assertions and are compared to traditional limits computed assuming normal distributions. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2017.

  7. Updated mortality study of a cohort of asbestos textile workers.

    Science.gov (United States)

    Pira, Enrico; Romano, Canzio; Violante, Francesco S; Farioli, Andrea; Spatari, Giovanna; La Vecchia, Carlo; Boffetta, Paolo

    2016-09-01

    Limited information is available on risk of peritoneal mesothelioma after asbestos exposure, and in general on the risk of cancer after cessation of asbestos exposure. We updated to 2013 the follow-up of a cohort of 1083 female and 894 male textile workers with heavy asbestos exposure (up to 100 fb/mL), often for short periods. A total of 1019 deaths were observed, corresponding to a standardized mortality ratio (SMR) of 1.68 (95% confidence interval [CI]: 1.57-1.78). SMRs were 29.1 (95% CI: 21.5-38.6) for peritoneal cancer, 2.96 (95% CI: 2.50-3.49) for lung cancer, 33.7 (95% CI: 25.7-43.4) for pleural cancer, and 3.03 (95% CI: 1.69-4.99) for ovarian cancer. For pleural and peritoneal cancer, there was no consistent pattern of risk in relation to time since last exposure, whereas for lung cancer there was an indication of a decline in risk after 25 years since last exposure. The findings of this unique cohort provide novel data for peritoneal cancer, indicating that - as for pleural cancer - the excess risk does not decline up to several decades after cessation of exposure. © 2016 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

  8. Pulmonary asbestos body counts and electron probe analysis of asbestos body cores in patients with mesothelioma: a study of 25 cases

    International Nuclear Information System (INIS)

    Roggli, V.L.; McGavran, M.H.; Subach, J.; Sybers, H.D.; Greenberg, S.D.

    1982-01-01

    Malignant mesotheliomas of the pleura and peritoneum are well-recognized risks of asbestos exposure. We determined the asbestos body content of the lungs from 24 cases of malignant mesothelioma (19 pleural, five peritoneal) and compared such to the content of lungs from 50 consecutive adult autopsies and four cases of overt asbestosis using a Clorox-digestion concentration technique. The cores of 90 asbestos bodies were examined by energy dispersive x-ray analysis and compared with similar data from 120 standard asbestos fibers and 20 fiberglass fibers. The malignant mesothelioma patients had asbestos body counts intermediate between those of the general population and those of patients with asbestosis, although some of the mesothelioma cases overlapped with the general population. These latter cases often lacked an identifiable occupational exposure to asbestos. EDXA studies demonstrated an amphibole core in 88 of the 90 asbestos bodies (amosite or crocidolite in 80 of 88, anthophyllite or tremolite in eight of 88), and chrysotile in two instances

  9. 78 FR 53821 - Federal Property Suitable as Facilities To Assist the Homeless

    Science.gov (United States)

    2013-08-30

    ... concerning the processing of applications, the reader is encouraged to refer to the interim rule governing...: 21201330045 Status: Excess Comments: Off-site removal only; 2,560 sf.; dining facility; 78 yrs. old; poor... Comments: off-site removal only; 13,493 sf.; dining facility; deteriorating; asbestos Building 07636...

  10. Developing Asbestos Job Exposure Matrix Using Occupation and Industry Specific Exposure Data (1984–2008 in Republic of Korea

    Directory of Open Access Journals (Sweden)

    Sangjun Choi

    2017-03-01

    Conclusion: The newly constructed GPJEM which is generated from actual domestic quantitative exposure data could be useful in evaluating historical exposure levels to asbestos and could contribute to improved prediction of asbestos-related diseases among Koreans.

  11. Occupational asbestos exposure and risk of pleural mesothelioma, lung cancer, and laryngeal cancer in the prospective netherlands cohort study

    NARCIS (Netherlands)

    Offermans, N.S.M.; Vermeulen, R.; Burdorf, A.; Goldbohm, R.A.; Kauppinen, T.; Kromhout, H.; Brandt, P.A. van den

    2014-01-01

    OBJECTIVE:: To study the association between occupational asbestos exposure and pleural mesothelioma, lung cancer, and laryngeal cancer, specifically addressing risk associated with the lower end of the exposure distribution, risk of cancer subtypes, and the interaction between asbestos and smoking.

  12. North Slope, Alaska ESI: FACILITY (Facility Points)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data for oil field facilities for the North Slope of Alaska. Vector points in this data set represent oil field facility locations. This data...

  13. CT characteristics of pleural plaques related to occupational or environmental asbestos exposure from South Korean asbestos mines

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yoo Kyung [Dept. of Radiology, School of Medicine, Ewha Womans University, Seoul (Korea, Republic of); Myong, Jun Pyo [Dept. of Occupational and Environmental Medicine, Seoul St. Mary' s Hospital, College of Medicine, The Catholic University of Korea, Seoul (Korea, Republic of); Lee, Jeong Kyong [Dept. of Radiology, Dongguk University Ilsan Hospital, Goyang (Korea, Republic of); Kim, Yoon Kyung [Dept. of Radiology, Gachon University Gil Medical Center, Incheon (Korea, Republic of); Jung, Soon Hee [Dept. of Pathology, Yonsei University Wonju College of Medicine, Wonju (Korea, Republic of)

    2015-10-15

    This study evaluated the CT characteristics of pleural plaques in asbestos-exposed individuals and compared occupational versus environmental exposure groups. This study enrolled 181 subjects with occupational exposure and 98 with environmental exposure from chrysotile asbestos mines, who had pleural plaques confirmed by a chest CT. The CT scans were analyzed for morphological characteristics, the number and distribution of pleural plaques and combined pulmonary fibrosis. Furthermore, the CT findings were compared between the occupational and environmental exposure groups. Concerning the 279 subjects, the pleural plaques were single in 2.2% and unilateral in 3.6%, and showed variable widths (range, 1-20 mm; mean, 5.4 ± 2.7 mm) and lengths (5-310 mm; 72.6 ± 54.8 mm). The chest wall was the most commonly involved (98.6%), with an upper predominance on the ventral side (upper, 77.8% vs. lower, 55.9%, p < 0.001) and a lower predominance on the dorsal side (upper, 74.9% vs. lower, 91.8%, p = 0.02). Diaphragmatic involvement (78.1%) showed a right-side predominance (right, 73.8% vs. left, 55.6%, p < 0.001), whereas mediastinal plaques (42.7%) were more frequent on the left (right, 17.6% vs. left, 39.4%, p < 0.001). The extent and maximum length of plaques, and presence and severity of combined asbestosis, were significantly higher in the occupational exposure group (p < 0.05). Pleural plaques in asbestos-exposed individuals are variable in number and size; and show a predominant distribution in the upper ventral and lower dorsal chest walls, right diaphragm, and left mediastinum. Asbestos mine workers have a higher extent of plaques and pulmonary fibrosis versus environmentally exposed individuals.

  14. CT characteristics of pleural plaques related to occupational or environmental asbestos exposure from South Korean asbestos mines

    International Nuclear Information System (INIS)

    Kim, Yoo Kyung; Myong, Jun Pyo; Lee, Jeong Kyong; Kim, Yoon Kyung; Jung, Soon Hee

    2015-01-01

    This study evaluated the CT characteristics of pleural plaques in asbestos-exposed individuals and compared occupational versus environmental exposure groups. This study enrolled 181 subjects with occupational exposure and 98 with environmental exposure from chrysotile asbestos mines, who had pleural plaques confirmed by a chest CT. The CT scans were analyzed for morphological characteristics, the number and distribution of pleural plaques and combined pulmonary fibrosis. Furthermore, the CT findings were compared between the occupational and environmental exposure groups. Concerning the 279 subjects, the pleural plaques were single in 2.2% and unilateral in 3.6%, and showed variable widths (range, 1-20 mm; mean, 5.4 ± 2.7 mm) and lengths (5-310 mm; 72.6 ± 54.8 mm). The chest wall was the most commonly involved (98.6%), with an upper predominance on the ventral side (upper, 77.8% vs. lower, 55.9%, p < 0.001) and a lower predominance on the dorsal side (upper, 74.9% vs. lower, 91.8%, p = 0.02). Diaphragmatic involvement (78.1%) showed a right-side predominance (right, 73.8% vs. left, 55.6%, p < 0.001), whereas mediastinal plaques (42.7%) were more frequent on the left (right, 17.6% vs. left, 39.4%, p < 0.001). The extent and maximum length of plaques, and presence and severity of combined asbestosis, were significantly higher in the occupational exposure group (p < 0.05). Pleural plaques in asbestos-exposed individuals are variable in number and size; and show a predominant distribution in the upper ventral and lower dorsal chest walls, right diaphragm, and left mediastinum. Asbestos mine workers have a higher extent of plaques and pulmonary fibrosis versus environmentally exposed individuals

  15. Influence of high-energy milling on structure and microstructure of asbestos-cement materials

    Science.gov (United States)

    Iwaszko, Józef; Zawada, Anna; Lubas, Małgorzata

    2018-03-01

    Asbestos-Containing Waste (ACW) in the form of a fragment from an asbestos-cement board was subjected to high-energy milling in a planetary mill at a constant rotational speed of 650 rpm and for variable milling times: 1, 2, and 3 h. The initial and the milled materials were subjected to infrared spectroscopic examination to identify the asbestos variety and to evaluate changes in the structure caused by high-energy milling. FT-IR (Fourier Transform Infrared Spectroscopy) examinations followed optical microscopy and SEM (Scanning Electron Microscopy) studies as well as X-ray analysis of the phase composition. It was found that the asbestos fibres present in the asbestos-cement board were respirable fibres with pathogenic properties. Identifying asbestos using the spectroscopic method showed that chrysotile asbestos was present in the as-received ACW while no characteristics of absorption bands from crocidolite or amosite were found. The results of the spectroscopic examinations were confirmed by the X-ray phase analysis. During SEM investigations of the milled ACW, complete loss of the fibrous structure of chrysotile was observed. The FT-IR examinations of the milled material showed that with an increased milling time, the characteristic absorption bands characteristic for chrysotile diminished and already after 2 h of milling their almost complete decay was observed. Thereby, it was confirmed that high-energy milling results in destruction of the crystalline structure of the asbestos phase. The conducted studies have shown that the treatment of asbestos-cement materials using high-energy milling is an effective method for asbestos disposal, capable of competing with other technologies and solutions. Moreover, FT-IR spectroscopy was found to be useful to identify asbestos phases and to assess changes caused by high-energy milling.

  16. Locative media

    CERN Document Server

    Wilken, Rowan

    2014-01-01

    Not only is locative media one of the fastest growing areas in digital technology, but questions of location and location-awareness are increasingly central to our contemporary engagements with online and mobile media, and indeed media and culture generally. This volume is a comprehensive account of the various location-based technologies, services, applications, and cultures, as media, with an aim to identify, inventory, explore, and critique their cultural, economic, political, social, and policy dimensions internationally. In particular, the collection is organized around the perception that the growth of locative media gives rise to a number of crucial questions concerning the areas of culture, economy, and policy.

  17. ASBESTOS EXPOSURES DURING ROUTINE FLOOR TILE MAINTENANCE. PART 2: ULTRA HIGH SPEED BURNISHING AND WET-STRIPPING

    Science.gov (United States)

    This study was conducted to evaluate airborne asbestos concentrations during ultra high speed (UHS) burnishing and wet-stripping of asbestos-containing resilient floor tile under two levels of floor care condition (poor and good). Airborne asbestos concentrations were measured by...

  18. 41 CFR 102-75.335 - Where asbestos is identified, what information must the disposal agency incorporate into the...

    Science.gov (United States)

    2010-07-01

    ... the property offered for sale contains asbestos-containing materials. Unprotected or unregulated...) and the U.S. Environmental Protection Agency (EPA) regulate asbestos because of the potential hazards... increases the risk of asbestos-related diseases, which include certain cancers and which can result in...

  19. Expected number of asbestos-related lung cancers in the Netherlands in the next two decades : a comparison of methods

    NARCIS (Netherlands)

    Van der Bij, Sjoukje; Vermeulen, Roel C H; Portengen, Lützen; Moons, Karel G M; Koffijberg, Hendrik

    2016-01-01

    OBJECTIVES: Exposure to asbestos fibres increases the risk of mesothelioma and lung cancer. Although the vast majority of mesothelioma cases are caused by asbestos exposure, the number of asbestos-related lung cancers is less clear. This number cannot be determined directly as lung cancer causes are

  20. Occupational characteristics of cases with asbestos-related diseases in The Netherlands

    NARCIS (Netherlands)

    A. Burdorf (Alex); M. Dahhan; P. Swuste (Paul)

    2003-01-01

    textabstractOBJECTIVE: To describe the occupational background of cases with an asbestos-related disease and to present overall mesothelioma risks across industries with historical exposure to asbestos. METHODS: For the period 1990-2000, cases were collected from records held by

  1. AIRBORNE ASBESTOS CONCENTRATIONS DURING BUFFING, BURNISHING, AND STRIPPING OF RESILIENT FLOOR TILE

    Science.gov (United States)

    The study was conducted to evaluate airborne asbestos concentrations during low-speed spray-buffing, ultra high-speed burnishing, and wet-stripping of asbestos-containing resilient floor tile under pre-existing and prepared levels of floor care maintenance. Low-speed spray-buffin...

  2. Exosomes from asbestos-exposed cells modulate gene expression in mesothelial cells.

    Science.gov (United States)

    Munson, Phillip; Lam, Ying-Wai; Dragon, Julie; MacPherson, Maximilian; Shukla, Arti

    2018-03-19

    Asbestos exposure is a determinate cause of many diseases, such as mesothelioma, fibrosis, and lung cancer, and poses a major human health hazard. At this time, there are no identified biomarkers to demarcate asbestos exposure before the presentation of disease and symptoms, and there is only limited understanding of the underlying biology that governs asbestos-induced disease. In our study, we used exosomes, 30-140 nm extracellular vesicles, to gain insight into these knowledge gaps. As inhaled asbestos is first encountered by lung epithelial cells and macrophages, we hypothesize that asbestos-exposed cells secrete exosomes with signature proteomic cargo that can alter the gene expression of mesothelial cells, contributing to disease outcomes like mesothelioma. In the present study using lung epithelial cells (BEAS2B) and macrophages (THP-1), we first show that asbestos exposure causes changes in abundance of some proteins in the exosomes secreted from these cells. Furthermore, exposure of human mesothelial cells (HPM3) to these exosomes resulted in gene expression changes related to epithelial-to-mesenchymal transition and other cancer-related genes. This is the first report to indicate that asbestos-exposed cells secrete exosomes with differentially abundant proteins and that those exosomes have a gene-altering effect on mesothelial cells.-Munson, P., Lam, Y.-W., Dragon, J. MacPherson, M., Shukla, A. Exosomes from asbestos-exposed cells modulate gene expression in mesothelial cells.

  3. Asbestos exposure among construction workers during demolition of old houses in Tehran, Iran.

    Science.gov (United States)

    Kakooei, Hossein; Normohammadi, Mohhammad

    2014-01-01

    Air quality in demolition practices has seldom been evaluated in Iran. Accordingly, we evaluated asbestos exposure among Tehran construction workers during the demolition of old houses. To identify possible sources of asbestos exposure, including thermal insulations, chimney pipes and cement sheets, were all sampled. This study also were taken the personal air samples to evaluate any asbestos exposure during the demolition. The asbestos fibers found in the samples were analyzed by phase-contrast optical microscopy (PCM), scanning electron microscopy (SEM) equipped with an energy dispersive X-ray analysis, and polarized light microscopy (PLM) methods. Personal monitoring of asbestos fiber levels indicated a range from 0.01 to 0.15 PCM f/ml (0.02-0.42 SEM f/ml). The geometric mean concentrations were 0.07 PCM f/ml (0.20 SEM f/ml), which is considerably higher than the threshold limit value (TLV) proposed by American Conference of Governmental Industrial Hygienist (ACGIH), which is 0.1 f/ml. The analysis showed a presence in the bulk samples only chrysotile asbestos and an absence of the other type asbestos. Therefore, it might be expected that workers who worked in the demolition of old houses will suffer from negative effects of exposing to the asbestos fibers.

  4. Determinants influencing the amount of asbestos-cement roofing in Poland

    Directory of Open Access Journals (Sweden)

    Wilk Ewa

    2015-09-01

    Full Text Available Because of its harmfulness to human health, asbestos has been banned in 55 countries, including the EU. In Poland, the use and production of asbestos and asbestos-containing products has been forbidden since 1997. However, there is no precise data about the amount of asbestos-containing products to be eliminated from the territory of Poland. This survey aims to identify characteristics that have a significant impact on the estimation of asbestos-containing products used in Poland. Statistical correlation between the results of the physical inventory count done in 155 municipalities was examined. As a result of the survey it was found that the amount of asbestos-cement roofing depends on the following factors: the number of individual farms in the village, the distance from the asbestos manufacturing plants, the age of the buildings and the economic situation of municipality. The results obtained may contribute to the ability to predict the amount of asbestos-containing products used in other municipalities.

  5. [Relationship between asbestos exposure and malignant pleural mesothelioma: occurrence near the old Japanese naval shipyard].

    Science.gov (United States)

    Kishimoto, T

    1994-12-01

    Kure City, Hiroshima Prefecture, was the site of a Japanese naval shipyard before World War II, and commercial ships were built there after the War. Large amounts of asbestos were used in this area primarily for shipbuilding, from before the war to around 1975. Probably due to exposure to asbestos, the incidence of malignant pleural mesothelioma is high in this city. Of the 31 patients with this disease, 27 were men. Patients over 60 years of age constituted a high percentage of the total and 28 had a history of asbestos exposure: 12 in the Japanese naval shipyard and 12 in the commercial shipyards. The average period of asbestos exposure for these 28 patients was 20 years. Malignant pleural mesothelioma developed more than 40 years after the first exposure to asbestos. Many asbestos particles and fibers were detected in the lungs and tumors of these patients. Most of the asbestos fibers detected were crocidolites or amosites. Considering that the amount of asbestos used in Japanese has been higher than in any other country, the incidence of malignant pleural mesothelioma may be expected to increase in this country. Countermeasures are now advisable.

  6. Occupational asbestos exposure: how to deal with suspected mesothelioma cases--the Dutch approach

    NARCIS (Netherlands)

    Baas, P.; van 't Hullenaar, N.; Wagenaar, J.; Kaajan, J. P. G.; Koolen, M.; Schrijver, M.; Schlösser, N.; Burgers, J. A.

    2006-01-01

    Patients with asbestos-related diseases, such as malignant mesothelioma (MM), are not uniformly treated in Europe when they apply for compensation. In The Netherlands, the Institute of Asbestos Victims (IAV) acts on behalf of patients with a malignant mesothelioma. In the majority of cases, the

  7. Development of the KOSHA Proficiency Testing Scheme on Asbestos Analysis in Korea

    Directory of Open Access Journals (Sweden)

    Jiwoon Kwon

    2017-09-01

    Full Text Available This commentary presents the regulatory backgrounds and development of the national proficiency testing (PT scheme on asbestos analysis in the Republic of Korea. Since 2009, under the amended Occupational Safety and Health Act, the survey of asbestos in buildings and clearance test of asbestos removal works have been mandated to be carried out by the laboratories designated by the Ministry of Employment and Labor (MOEL in the Republic of Korea. To assess the performance of asbestos laboratories, a PT scheme on asbestos analysis was launched by the Korea Occupational Safety and Health Agency (KOSHA on behalf of the MOEL in 2007. Participating laboratories are evaluated once a year for fiber counting and bulk asbestos analysis by phase contrast microscopy and polarized light microscopy, respectively. Currently, the number of laboratory enrollments is > 200, and the percentage of passed laboratories is > 90. The current status and several significant changes in operation, sample preparations, and statistics of assigning the reference values of the KOSHA PT scheme on asbestos analysis are presented. Critical retrospect based on the experiences of operating the KOSHA PT scheme suggests considerations for developing a new national PT scheme for asbestos analysis.

  8. [Role of biometric analysis in the retrospective assessment of exposure to asbestos].

    Science.gov (United States)

    Pairon, J C; Dumortier, P

    1999-12-01

    Despite intrinsic limitations due to differences in the bio-persistence of the various asbestos types, in the definition of control populations and in analytical techniques used by the laboratories, mineralogical analysis of biological samples is useful in the assessment of past exposure to asbestos. It provides additional information to occupational and environmental questionnaires, particularly when exposure to asbestos is doubtful, unknown or forgotten by a subject. Results should be interpreted taking into account clinical information. A positive result does not mean existence of asbestos-related disease. A negative result does not exclude previous significant asbestos exposure, clearly identified by an occupational questionnaire (particularly for exposure to chrysotile). Threshold values indicative of a high probability of previous asbestos exposure have been established for bronchoalveolar lavage fluid (BALF) samples and lung tissue samples. Quantification of asbestos bodies by light microscopy is easy to perform. Sensitivity and specificity of this analysis towards the total pulmonary asbestos fiber burden is good. Therefore this analysis should be performed first. Mineralogical analysis in BALF or lung tissue should be considered only when sampling is supported by diagnostic or therapeutic implications.

  9. Effects of nearshore evaporation rates on the design of seabed gallery intake systems for SWRO facilities located along the Red Sea shoreline of Saudi Arabia

    KAUST Repository

    Dehwah, Abdullah

    2015-10-12

    Feed water to seawater reverse osmosis desalination systems should have a constant salinity with minimal variation. Intake systems that extract water from shallow nearshore areas in arid regions can exhibit significant fluctuations in salinity caused by high rates of evaporation and lack of circulation. Such fluctuations in salinity could inhibit the design, construction, and operation of seabed gallery intake systems located in shallow nearshore areas, such as the Red Sea inner shelf. Water depths range from 0 to 2 m between the beach and the edge of the fringing reef in the optimal locations for the development of seabed gallery intakes along the coast of the Red Sea of Saudi Arabia. The evaporation rate in this area is between 2 and 3 m per year. The bottom consists of mostly a marine hardground containing a thin veneer of unlithified sediment and no significant cover of corals or seagrass. The rather barren nature of the bottom suggests that periodic hypersalinity may contribute to the formation of hardgrounds on the bottom by causing supersaturation of the seawater with calcium carbonate and may limit the growth of corals and grasses. To assess the changes in salinity, a conceptual model was developed which assumes that a shallow circulation cell develops between the shoreline and deeper water offshore. Lower salinity seawater should migrate landward to replace water loss caused by evaporation with seaward moving of high-salinity water occurring along the bottom to balance the flow with ultimate mixing before the reef tract. To test this circulation pattern, a series of sensors were deployed to continuously monitor the water temperature, conductivity, and salinity at the surface and at the bottom during several periods of high air temperature. Surprisingly, the results show very little variation in salinity, despite the very high evaporation loss. The water salinity ranged between 39,000 and 40,000 mg/L with no diurnal variations of significance. Based on the

  10. Location-independent study concerning the construction, operation and closure of possible facilities for the final storage of radioactive waste in rock-salt formations in the Netherlands

    International Nuclear Information System (INIS)

    1986-04-01

    Final storage of radioactive waste has been studied on the base of two main concepts: in deep boreholes and caverns from the mowing-field, and for a, for this purpose to be developed, underground ore. Storage supplies have been designed, including the closing constructions after finishing the storage activities, with a, much longer than usually, technical lifetime. Herein use has been made of in general known materials whose properties and behaviour were assumed to remain unaltered over long periods and also will not be influenced by the rock-salt environment. The possible storage concepts described are location independent and based upon the geological and geomechanical information which have been provided with the task and which are indicative for the rock-salt formations occurring in the Netherlands. In first instance the authors have started from the thermodynamical, chemical and fysical properties of the storage rock-formations as are mentioned in the apendices of the task. It particularly concerns properties of the storage rock-formations and the construction materials needed for a qualitatively good and reliable closing of the storage. The construction and operation of the in this report described storage concepts is based upon the storage scenario's as indicated in the task circumscriptions

  11. Location, location, location: Extracting location value from house prices

    OpenAIRE

    Kolbe, Jens; Schulz, Rainer; Wersing, Martin; Werwatz, Axel

    2012-01-01

    The price for a single-family house depends both on the characteristics of the building and on its location. We propose a novel semiparametric method to extract location values from house prices. After splitting house prices into building and land components, location values are estimated with adaptive weight smoothing. The adaptive estimator requires neither strong smoothness assumptions nor local symmetry. We apply the method to house transactions from Berlin, Germany. The estimated surface...

  12. Asbesto, asbestose e câncer: critérios diagnósticos Asbestos, asbestosis and cancer: diagnostic criteria

    Directory of Open Access Journals (Sweden)

    VERA LUIZA CAPELOZZI

    2001-07-01

    Full Text Available As doenças asbesto-induzidas constituem um grave problema de saúde em decorrência de grande número de trabalhadores expostos ao asbesto ao longo dos últimos 50 anos. Processos judiciais contra indústrias que lidam com asbesto somam centenas, com crescente adição de novos casos. O assunto relativo à asbestose é complexo e, muito embora a história natural das doenças induzidas esteja bem estabelecida, muitas áreas importantes, como a patologia, permanecem ainda pouco compreendidas. No Brasil, desde 1940, o asbesto é explorado comercialmente e nos últimos anos sua produção foi da ordem de 200.000 toneladas por ano, estimando-se que na atividade de mineração cerca de 10.000 trabalhadores foram expostos a essa fibra, desconhecendo-se a estimativa do número de pessoas expostas na produção de fibrocimento, especialmente telhas e caixas d'água. Um estudo, com metodologia de investigação científica apropriada, para avaliar as repercussões sobre a saúde dos trabalhadores nas minas de asbesto em nosso país, foi elaborado e intitulado "Morbidade e mortalidade entre trabalhadores expostos ao asbesto na atividade de mineração 1940-1996", de cunho interinstitucional. O objetivo deste trabalho foi fornecer uma visão ampla das doenças asbesto-induzidas, com ênfase nas dificuldades no diagnóstico histopatológico, através da experiência adquirida com o desenrolar desse projeto.Asbestos-induced diseases are still major health problems, as a remarkably large number of workers have been exposed to asbestos over the past 50 years. Personal injury lawsuits against asbestos manufacturers number hundreds of thousands, and new cases are still being filed. Asbestosis is a complex issue, and although the broad outlines of asbestos-related diseases are well set, many important areas, especially pathology, are poorly understood. In Brazil, since 1940, asbestos has been commercially explored, producing around 200,000 tons/year, exposing

  13. Asbestos fibres in indoor and outdoor air and the epidemiology of asbestos-related diseases in Quebec : summary and recommendation of the reports

    Energy Technology Data Exchange (ETDEWEB)

    DeGuire, L.; Lajoie, P.; Lemieux, C.; Poulin, M.

    2004-07-01

    An asbestos advisory committee was created in 1997 by Quebec's Ministry of Health to address concerns regarding exposure to asbestos fibres. Two sub-committees were subsequently formed. One sub-committee evaluated the pertinence and feasibility of assessing exposure in the general population, particularly in public buildings such as schools, while the other reviewed epidemiological studies in Quebec on mesothelioma, pulmonary cancers and asbestosis. Each sub-committee produced a report. This document summarizes the two reports and outlines the current scientific knowledge on the effects of asbestos on human health. The preventive programs and subsequent evaluations undertaken in Quebec with respect to sprayed asbestos in schools was described along with studies of asbestos exposure among workers in the mining sector. A study was also conducted within the asbestos processing industry to identify how many workers exceeded standard exposure limits. The standard time-weighted average exposure value currently in force in Quebec is 1 fibre per ml for chrysotile and 0.2 fibres per ml for amosite and crocidolite. A recommendation was made to revise this standard. In terms of outdoor air, the concentrations measured in recent years in mining towns have been generally very low. Along with asbestos-asphalt, asbestos waste taken to landfill sites may represent a significant source of exposure. A screening for asbestosis in the building and public works sector has shown that 1,500 workers (insulators, plumber-pipe fitters, elevator mechanics, fire protection mechanics and boiler-makers) experienced significant exposure to high concentrations of asbestos fibres in the ambient air. The 3 main health effects of asbestos exposure include mesothelioma of the pleura and peritoneum, pulmonary cancer and asbestosis. Each of these diseases appears after a latency period of 20 to 40 years, depending on the pathology. Epidemiological studies show a statistically significant increase

  14. Respiratory impairment due to asbestos exposure in brake-lining workers

    International Nuclear Information System (INIS)

    Erdinc, M.; Erdinc, E.; Cok, G.; Polatli, M.

    2003-01-01

    There is extensive evidence that exposure to asbestos causes pulmonary parenchyma fibrosis, pleural disease, and malignant neoplasm in asbestos-exposed workers. However, few data concerning brake-lining workers are available in the literature. In this study, we aimed to assess the long-term effects of chrysotile asbestos exposure on lung function and the risk of asbestos-related diseases in brake-lining workers. Seventy-four asbestos-exposed workers who processed brake-lining products and 12 unexposed office workers were offered pulmonary function tests (spirometry and transfer actor) in 1992 and 1999. In 1999, the mean duration of asbestos exposure was 0.00±4.07 and 11.02±4.81 years (7-31 years) in non smoking and smoking asbestos workers, respectively. Transfer factor (T L , CO) and transfer coefficient (K CO ) decline were significant in the 7-year follow-up in both smoking and non smoking asbestos workers. However, lung function indices of he control group, whom were all current smokers; were also found to be decreased, including FEF 75 , T L , CO and K CO . We found minimal reticular changes in 10 asbestos workers who were all current smokers, they underwent high-resolution computed tomography scans of the chest and we found that they ad peri bronchial thickening resulting from smoking. As a conclusion, even in the absence of radiographic asbestosis, T L , CO and K CO may decrease after mean 10-year duration of exposure to asbestos in brake-lining workers and this is more noticeable with cigarette burden

  15. Airborne Asbestos Exposures from Warm Air Heating Systems in Schools.

    Science.gov (United States)

    Burdett, Garry J; Dewberry, Kirsty; Staff, James

    2016-01-01

    The aim of this study was to investigate the concentrations of airborne asbestos that can be released into classrooms of schools that have amosite-containing asbestos insulation board (AIB) in the ceiling plenum or other spaces, particularly where there is forced recirculation of air as part of a warm air heating system. Air samples were collected in three or more classrooms at each of three schools, two of which were of CLASP (Consortium of Local Authorities Special Programme) system-built design, during periods when the schools were unoccupied. Two conditions were sampled: (i) the start-up and running of the heating systems with no disturbance (the background) and (ii) running of the heating systems during simulated disturbance. The simulated disturbance was designed to exceed the level of disturbance to the AIB that would routinely take place in an occupied classroom. A total of 60 or more direct impacts that vibrated and/or flexed the encapsulated or enclosed AIB materials were applied over the sampling period. The impacts were carried out at the start of the sampling and repeated at hourly intervals but did not break or damage the AIB. The target air volume for background samples was ~3000 l of air using a static sampler sited either below or ~1 m from the heater outlet. This would allow an analytical sensitivity (AS) of 0.0001 fibres per millilitre (f ml(-1)) to be achieved, which is 1000 times lower than the EU and UK workplace control limit of 0.1 f ml(-1). Samples with lower volumes of air were also collected in case of overloading and for the shorter disturbance sampling times used at one site. The sampler filters were analysed by phase contrast microscopy (PCM) to give a rapid determination of the overall concentration of visible fibres (all types) released and/or by analytical transmission electron microscopy (TEM) to determine the concentration of asbestos fibres. Due to the low number of fibres, results were reported in terms of both the calculated

  16. Allocation and Location of Transport Logistics Centres

    Directory of Open Access Journals (Sweden)

    D. Mocková

    2010-01-01

    Full Text Available The facility allocation problem sets out to determine the optimal number of facilities to be opened. Based on multiple criteria evaluation, the optimal location of the facilities is usually solved subsequently. Several considerations, e.g. technical parameters, costs and finance must be taken into account. Economic analysis is carried out on the basis of the specific instance of the problem.Let us assume that the number of potentially located facilities is known. Then the problem of the optimal location of a given number of facilities in a network is referred to as the facility location problem. The solution to the problem is a set of facilities optimally located in an area such that this area is fully covered by the required services that the facilities provide. An example of a real-life problem of this type is the location of logistics centers. 

  17. BOA: Asbestos pipe insulation removal robot system. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    Schempf, H.; Bares, J.E.

    1995-02-01

    The project described in this report targets the development of a mechanized system for safe, cost-efficient and automated abatement of asbestos containing materials used as pipe insulation. Based on several key design criteria and site visits, a proof-of-concept prototype robot system, dubbed BOA, was designed and built, which automatically strips the lagging and insulation from the pipes, and encapsulates them under complete vacuum operation. The system can operate on straight runs of piping in horizontal or vertical orientations. Currently we are limited to four-inch diameter piping without obstacles as well as a somewhat laborious emplacement and removal procedure -- restrictions to be alleviated through continued development. BOA removed asbestos at a rate of 4-5 ft./h compared to 3 ft./h for manual removal of asbestos with a 3-person crew. The containment and vacuum system on BOA was able to achieve the regulatory requirement for airborne fiber emissions of 0.01 fibers/ccm/ 8-hr. shift. This program consists of two phases. The first phase was completed and a demonstration was given to a review panel, consisting of DOE headquarters and site representatives as well as commercial abatement industry representatives. Based on the technical and programmatic recommendations drafted, presented and discussed during the review meeting, a new plan for the Phase II effort of this project was developed. Phase 11 will consist of a 26-month effort, with an up-front 4-month site-, market-, cost/benefit and regulatory study before the next BOA robot (14 months) is built, and then deployed and demonstrated (3 months) at a DOE site (such as Fernald or Oak Ridge) by the beginning of FY`97.

  18. Evaluation of the varying Naturally Occurring Asbestos mitigation measures at School and Commercial construction projects in California

    Science.gov (United States)

    Kalika, S.

    2012-12-01

    In commercial development or K-12 school construction, project sites are often purchased and much of the planning process completed prior to an assessment of the soils proposed for excavation or potential offhaul. Geologic maps, while initially helpful for identifying potential hazards such as landslides and earthquake faults, are less helpful in the identification of naturally occurring hazardous minerals, such as the seven regulated minerals currently classified as asbestos. Geologic maps identify mafic and ultramafic bedrock zones; however, a skilled geologist with knowledge of asbestos hazards will further visualize the earth-shaping processes that may have resulted in the deposition of naturally occurring asbestos in locations outside mapped ultramafic zones including the base of an alluvial fan or within streambed channels. When sampled as an afterthought prior to disposal, property owners are surprised by the budget-crippling costs of waste handling and disposal of NOA, as well as mitigations required to protect the health of construction workers, the public, and future site occupants. The California Air Resources Board (CARB) continues to lead the way in evaluation and regulation of NOA, through development of the CARB 435 preparation and laboratory analytical method, local enforcement of the Asbestos Airborne Toxic Control Measure for Construction, Grading, Quarrying, and Surface Mining Operations (ATCM), and implementation of dust control measures to protect public health. A thorough site evaluation and construction design includes utilization of the sampling methods developed by the California Geological Survey, laboratory analytical methods within CARB 435, and mitigation measures required by CARB, DTSC, and OSHA for the protection of worker and public health after NOA is discovered. The site evaluation should additionally include an assessment of the future site usage, as regulations differ based on potential health affects to future occupants

  19. Control during corporate crisis: asbestos and the Manville bankruptcy.

    Science.gov (United States)

    Delaney, K J

    1991-01-01

    Chapter 11 bankruptcy provides an opportunity for addressing issues of power and control during corporate crisis. A broad notion of power is essential in understanding the complex events that led to the Chapter 11 filing of the Manville Corporation, formerly the nation's leading asbestos manufacturer. The theory of finance hegemony places this case in an entirely new light by taking into account the power of the financial community. The Manville bankruptcy illuminates several mechanisms by which this hegemony operates. From this perspective, Chapter 11 bankruptcy is viewed as a choice made from a set of options severely constrained by other powerful institutions, rather than a result of managerial incompetence or market failure.

  20. Use of asbestos building materials in Malaysia: legislative measures, the management, and recommendations for a ban on use.

    Science.gov (United States)

    Safitri Zen, Irina; Ahamad, Rahmalan; Gopal Rampal, Krishna; Omar, Wahid

    2013-01-01

    Malaysia has partially banned the use of asbestos. The prohibition of asbestos building materials in schools, clinics, and hospitals built by government started in 1999. Since 2005, prohibition has also been applied to all government buildings. However, asbestos construction materials such as roof and ceiling tiles are still sold in the market. There are no acts or regulations prohibiting the use of asbestos in private buildings in Malaysia. Asbestos was first used for industrial purposes in Malaysia in the 1960s and the first regulations related to asbestos have been around since the 1980s. Non-governmental organizations have been pushing the government to impose a total ban since the 1980s. Asbestos is still used in the manufacturing sector under the "control use" concept. The study found difficulties in established and validated medical record data on asbestos-related diseases. This paper reviews existing asbestos-related regulations and guidelines in Malaysia and discusses the urgency for a total ban in the use of asbestos in building materials in the country. In the meanwhile, stricter enforcement of occupational safety and health regulations related to the use and exposure of asbestos among workers in the manufacturing, construction, maintenance, and demolition sectors has been in place.

  1. In situ ESEM study of the thermal decomposition of chrysotile asbestos in view of safe recycling of the transformation product

    International Nuclear Information System (INIS)

    Gualtieri, Alessandro F.; Gualtieri, Magdalena Lassinantti; Tonelli, Massimo

    2008-01-01

    The thermal transformation of asbestos into non-hazardous crystalline phases and their recycling is a promising solution for the 'asbestos problem'. The most common asbestos-containing industrial material produced worldwide is cement-asbestos. Knowledge of the kinetics of thermal transformation of asbestos fibers in cement-asbestos is of paramount importance for the optimization of the firing process at industrial scale. Here, environmental scanning electron microscopy (ESEM) was used for the first time to follow in situ the thermal transformation of chrysotile fibers present in cement-asbestos. It was found that the reaction kinetics of thermal transformation of chrysotile was highly slowed down in the presence of water vapor in the experimental chamber with respect to He. This was explained by chemisorbed water on the surface of the fibers which affected the dehydroxylation reaction and consequently the recrystallization into Mg-silicates. In the attempt to investigate alternative and faster firing routes for the decomposition of asbestos, a low melting glass was mixed with cement-asbestos and studied in situ to assess to which extent the decomposition of asbestos is favored. It was found that the addition of a low melting glass to cement-asbestos greatly improved the decomposition reaction and decreased the transformation temperatures

  2. Siderophores, the answer for micro to nanosized asbestos fibre related health hazard

    Science.gov (United States)

    Bhattacharya, Shabori; Ledwani, Lalita; John, P. J.

    2016-04-01

    Recent studies on the potential toxicity of High Aspect Ratio Nanoparticles (HARN) has yet once again reinforced the health hazard imposed by asbestos fibres ranging from nano to micro size. Asbestos a naturally occurring fibrous mineral declared a Group I definite carcinogen by IARC (International Agency for Research on Cancer), a unit of WHO in the year 1987, has been extensively used since World War II to the near past for various commercial products. According to the most recent World Health Organization (WHO) estimates, asbestos-related diseases, resulting from exposure at workplace claims more than 107000 lives every year worldwide. The various types of toxic effects induced by asbestos in humans include - i) inflammation and fibrogenesis of lung, ii) mesothelioma iii) asbestosis and iv) bronchogenic carcinoma. The stability of asbestos in natural environment and its biological aggressiveness is related to their fibrous structure and dimensions. The actual risk associated with the exposure to nanosized asbestos, which is still unknown and escapes most regulations worldwide, has been shown in various toxicity assessment studies conducted on various animal models.In an effort to reduce the size of asbestos and therby its toxicity by limiting its biopersistence, oxalic acid treatment of asbestos coupled to power ultrasound treatment was carried out. The nanosized particles formed were still found to retain their hazardous effect. Similar were the results obtained on strong acid treatment of asbestos as well. A probable solution to the asbestos toxicity problem therefore envisaged was bioremediation. This involved the secretion of iron chelating molecules termed siderophores by microbes, which are of significance due to their ability to form very stable and soluble complexes with iron. Iron in asbestos composition is a major factor responsible for its carcinogenicity, removal or extraction of which would prove to be an effective answer to the worldwide problem

  3. Library Locations

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Carnegie Library of Pittsburgh locations including address, coordinates, phone number, square footage, and standard operating hours. The map below does not display...

  4. Incinerators, Hazardous Waste, To identify and locate abandoned oil production facilities and apparatus which pose a potential threat for creating an oil spill through either natural or accidental causes., Published in 1998, 1:24000 (1in=2000ft) scale, Louisiana State University (LSU).

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Incinerators, Hazardous Waste dataset current as of 1998. To identify and locate abandoned oil production facilities and apparatus which pose a potential threat for...

  5. Police Stations, City of Wichita Police Department substation locations. Cover is derived from Emergency Facilities (scEfac) cover. Used for Public Safety map rolls. Primary attributes include station number, address, mailing city, type, and name., Published in 2008, 1:1200 (1in=100ft) scale, Sedgwick County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Police Stations dataset current as of 2008. City of Wichita Police Department substation locations. Cover is derived from Emergency Facilities (scEfac) cover. Used...

  6. Summary Report - Inspections of DoD Facilities and Military Housing and Audits of Base Operations and Support Services Contracts

    Science.gov (United States)

    2016-10-14

    drinking water quality, radon, pest management, mold, and radiation. In addition, during the Japan and Korea inspections, we evaluated the management...Components responsible for facilities management conduct such analyses and use the results of these root cause analyses to improve facility management...water quality, radon, mold, pest infestation, lead-based paint, asbestos, and radiation) requirements. These inspections should be conducted by

  7. Italian pool of asbestos workers cohorts: mortality trends of asbestos-related neoplasms after long time since first exposure.

    Science.gov (United States)

    Ferrante, Daniela; Chellini, Elisabetta; Merler, Enzo; Pavone, Venere; Silvestri, Stefano; Miligi, Lucia; Gorini, Giuseppe; Bressan, Vittoria; Girardi, Paolo; Ancona, Laura; Romeo, Elisa; Luberto, Ferdinando; Sala, Orietta; Scarnato, Corrado; Menegozzo, Simona; Oddone, Enrico; Tunesi, Sara; Perticaroli, Patrizia; Pettinari, Aldo; Cuccaro, Francesco; Mattioli, Stefano; Baldassarre, Antonio; Barone-Adesi, Francesco; Cena, Tiziana; Legittimo, Patrizia; Marinaccio, Alessandro; Mirabelli, Dario; Musti, Marina; Pirastu, Roberta; Ranucci, Alessandra; Magnani, Corrado

    2017-12-01

    Asbestos is a known human carcinogen, with evidence for malignant mesothelioma (MM), cancers of lung, ovary, larynx and possibly other organs. MM rates are predicted to increase with a power of time since first exposure (TSFE), but the possible long-term attenuation of the trend is debated. The asbestos ban enforced in Italy in 1992 gives an opportunity to measure long-term cancer risk in formerly exposed workers. Pool of 43 previously studied Italian asbestos cohorts (asbestos cement, rolling stock, shipbuilding), with mortality follow-up updated to 2010. SMRs were computed for the 1970â€"2010 period, for the major causes, with consideration of duration and TSFE, using reference rates by age, sex, region and calendar period. The study included 51 801 subjects (5741 women): 55.9% alive, 42.6% died (cause known for 95%) and 1.5% lost to follow-up. Mortality was significantly increased for all deaths (SMR: men: 1.05, 95% CI 1.03 to 1.06; women: 1.17, 95% CI to 1.12 to 1.22), all malignancies combined (SMR: men: 1.17, 95% CI to 1.14 to 1.20; women: 1.33, 95% CI 1.24 to 1.43), pleural and peritoneal malignancies (SMR: men: 13.28 and 4.77, 95% CI 12.24 to 14.37 and 4.00 to 5.64; women: 28.44 and 6.75, 95% CI 23.83 to 33.69 and 4.70 to 9.39), lung (SMR: men: 1.26, 95% CI 1.21 to 1.31; women: 1.43, 95% CI 1.13 to 1.78) and ovarian cancer (SMR=1.38, 95% CI 1.00 to 1.87) and asbestosis (SMR: men: 300.7, 95% CI 270.7 to 333.2; women: 389.6, 95% CI 290.1 to 512.3). Pleural cancer rate increased during the first 40 years of TSFE and reached a plateau after. The study confirmed the increased risk for cancer of the lung, ovary, pleura and peritoneum but not of the larynx and the digestive tract. Pleural cancer mortality reached a plateau at long TSFE, coherently with recent reports. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  8. Environmental Toxicology Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Fully-equipped facilities for environmental toxicology researchThe Environmental Toxicology Research Facility (ETRF) located in Vicksburg, MS provides over 8,200 ft...

  9. Cold Vacuum Drying Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Located near the K-Basins (see K-Basins link) in Hanford's 100 Area is a facility called the Cold Vacuum Drying Facility (CVDF).Between 2000 and 2004, workers at the...

  10. Integrated Disposal Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Located near the center of the 586-square-mile Hanford Site is the Integrated Disposal Facility, also known as the IDF.This facility is a landfill similar in concept...

  11. Mortality from asbestos-associated disease in Libby, Montana 1979-2011.

    Science.gov (United States)

    Naik, Samantha Lampert; Lewin, Michael; Young, Rand; Dearwent, Steve M; Lee, Robin

    2017-03-01

    Research on asbestos exposure in Libby, MT, has focused on occupational exposure in vermiculite mining and processing, but less attention has been paid to asbestos-related mortality among community members without vermiculite mining occupational history. Our study reports on asbestos-related mortality in Libby over 33 years (1979-2011) while controlling for occupational exposure. We calculated sex-specific 33-year standardized mortality ratios (SMRs) for Libby residents who died from 1979 to 2011 with an asbestos-related cause of death. Decedent address at time of death was geocoded to confirm inclusion in the Libby County Division. We controlled for past W.R. Grace employment by including and then removing them from the SMR analysis. Six hundred and ninety-four decedents were identified as having at least one asbestos-related cause of death and residing in our study area boundary. Statistically significant (Pdiseases, female COPD, and asbestosis for both sexes combined. Eighty-five men and two women were matched to employment records. We observed elevated asbestos-related mortality rates among males and females. SMR results for asbestosis were high for both sexes, even after controlling for past W.R. Grace employment. These results suggest that the general population may be experiencing asbestos-related effects, not just former vermiculite workers. Additional research is needed to determine whether SMRs remain elevated after controlling for secondary exposure, such as living with vermiculite workers.

  12. REAL-TIME IDENTIFICATION AND CHARACTERIZATION OF ASBESTOS AND CONCRETE MATERIALS WITH RADIOACTIVE CONTAMINATION

    International Nuclear Information System (INIS)

    XU, X. George; Zhang, X.C.

    2002-01-01

    Concrete and asbestos-containing materials were widely used in DOE building construction in the 1940s and 1950s. Over the years, many of these porous materials have been contaminated with radioactive sources, on and below the surface. To improve current practice in identifying hazardous materials and in characterizing radioactive contamination, an interdisciplinary team from Rensselaer has conducted research in two aspects: (1) to develop terahertz time-domain spectroscopy and imaging system that can be used to analyze environmental samples such as asbestos in the field, and (2) to develop algorithms for characterizing the radioactive contamination depth profiles in real-time in the field using gamma spectroscopy. The basic research focused on the following: (1) mechanism of generating of broadband pulsed radiation in terahertz region, (2) optimal free-space electro-optic sampling for asbestos, (3) absorption and transmission mechanisms of asbestos in THz region, (4) the role of asbestos sample conditions on the temporal and spectral distributions, (5) real-time identification and mapping of asbestos using THz imaging, (7) Monte Carlo modeling of distributed contamination from diffusion of radioactive materials into porous concrete and asbestos materials, (8) development of unfolding algorithms for gamma spectroscopy, and (9) portable and integrated spectroscopy systems for field testing in DOE. Final results of the project show that the combination of these innovative approaches has the potential to bring significant improvement in future risk reduction and cost/time saving in DOE's D and D activities

  13. Microwave-driven asbestos treatment and its scale-up for use after natural disasters.

    Science.gov (United States)

    Horikoshi, Satoshi; Sumi, Takuya; Ito, Shigeyuki; Dillert, Ralf; Kashimura, Keiichiro; Yoshikawa, Noboru; Sato, Motoyasu; Shinohara, Naoki

    2014-06-17

    Asbestos-containing debris generated by the tsunami after the Great East Japan Earthquake of March 11, 2011, was processed by microwave heating. The analysis of the treated samples employing thermo gravimetry, differential thermal analysis, X-ray diffractometry, scanning electron microscopy, and phase-contrast microscopy revealed the rapid detoxification of the waste by conversion of the asbestos fibers to a nonfibrous glassy material. The detoxification by the microwave method occurred at a significantly lower processing temperature than the thermal methods actually established for the treatment of asbestos-containing waste. The lower treatment temperature is considered to be a consequence of the microwave penetration depth into the waste material and the increased intensity of the microwave electric field in the gaps between the asbestos fibers resulting in a rapid heating of the fibers inside the debris. A continuous treatment plant having a capacity of 2000 kg day(-1) of asbestos-containing waste was built in the area affected by the earthquake disaster. This treatment plant consists of a rotary kiln to burn the combustible waste (wood) and a microwave rotary kiln to treat asbestos-containing inorganic materials. The hot flue gas produced by the combustion of wood is introduced into the connected microwave rotary kiln to increase the energy efficiency of the combined process. Successful operation of this combined device with regard to asbestos decomposition is demonstrated.

  14. BOA: Pipe-asbestos insulation removal robot system

    International Nuclear Information System (INIS)

    Schempf, H.; Bares, J.; Mutschler, E.

    1995-01-01

    This paper describes the BOA system, a mobile pipe-external crawler used to remotely strip and bag (possibly contaminated) asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations across the DOE weapons complex. The mechanical removal of ACLIM is very cost-effective due to the relatively low productivity and high cost involved in human removal scenarios. BOA, a mechanical system capable of removing most forms of lagging (paper, plaster, aluminum sheet, clamps, screws and chicken-wire), and insulation (paper, tar, asbestos fiber, mag-block) uses a circular cutter and compression paddles to cut and strip the insulation off the pipe through compression, while a HEPA-filter and encapsulant system maintain a certifiable vacuum and moisture content inside the system and on the pipe, respectively. The crawler system has been built and is currently undergoing testing. Key design parameters and performance parameters are developed and used in performance testing. Since the current system is a testbed, we also discuss future enhancements and outline two deployment scenarios (robotic and manual) for the final system to be designed and completed by the end of FY '95. An on-site demonstration is currently planned for Fernald in Ohio and Oak Ridge in Tennessee

  15. Corporate corruption of science-Another asbestos example.

    Science.gov (United States)

    Egilman, David; Monárrez, Rubén

    2017-02-01

    Kelsh et al. [2007]: Occup Med (Lond) 57:581-589 published a paper reanalyzing one of the few data sources publicly available on mesothelioma amongst brake workers, the Australian Mesothelioma Surveillance Registry (AMSR). This reanalysis was commissioned by lawyers representing the automobile manufacturing companies and did not align with an independent analysis published by Leigh and Driscoll [2003]: Occup Environ Health 9:206-217. We sought to reevaluate the AMSR data ourselves to understand how the company-sponsored research categorized the data. In our re-analysis of the 78 brake-related folios in the AMSR, we determined that 57 were employed brake mechanics, 35 were employed brake mechanics with no other asbestos exposure besides brake work or repair, and 41 of these cases had no other asbestos exposure besides brake work or repair. Our classifications differed significantly from Kelsh et al. We discuss how Kelsh et al. methodically reduced the relevant cases by following overly stringent criteria for inclusion. Am. J. Ind. Med. 60:152-162, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  16. Airborne asbestos exposures associated with gasket and packing replacement: a simulation study and meta-analysis.

    Science.gov (United States)

    Madl, Amy K; Hollins, Dana M; Devlin, Kathryn D; Donovan, Ellen P; Dopart, Pamela J; Scott, Paul K; Perez, Angela L

    2014-08-01

    Exposures to airborne asbestos during the removal and installation of internal gaskets and packing associated with a valve overhaul were characterized and compared to published data according to different variables (e.g., product, equipment, task, tool, setting, duration). Personal breathing zone and area samples were collected during twelve events simulating gasket and packing replacement, clean-up and clothing handling. These samples were analyzed using PCM and TEM methods and PCM-equivalent (PCME) airborne asbestos concentrations were calculated. A meta-analysis was performed to compare these data with airborne asbestos concentrations measured in other studies involving gaskets and packing. Short-term mechanic and assistant airborne asbestos concentrations during valve work averaged 0.013f/cc and 0.008f/cc (PCME), respectively. Area samples averaged 0.008f/cc, 0.005f/cc, and 0.003f/cc (PCME) for center, bystander, and remote background, respectively. Assuming a tradesman conservatively performs 1-3 gasket and/or packing replacements daily, an average 8-h TWA was estimated to be 0.002-0.010f/cc (PCME). Combining these results in a meta-analysis of the published exposure data showed that the majority of airborne asbestos exposures during work with gaskets and packing fall within a consistent and low range. Significant differences in airborne concentrations were observed between power versus manual tools and removal versus installation tasks. Airborne asbestos concentrations resulting from gasket and packing work during a valve overhaul are consistent with historical exposure data on replacement of asbestos-containing gasket and packing materials involving multiple variables and, in nearly all plausible scenarios, result in average airborne asbestos concentrations below contemporaneous occupational exposure limits for asbestos. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Comparison of three small-break loss-of-coolant accident tests with different break locations using the system-integrated modular advanced reactor-integral test loop facility to estimate the safety of the smart design

    Directory of Open Access Journals (Sweden)

    Hwang Bae

    2017-08-01

    Full Text Available Three small-break loss-of-coolant accident (SBLOCA tests with safety injection pumps were carried out using the integral-effect test loop for SMART (System-integrated Modular Advanced ReacTor, i.e., the SMART-ITL facility. The types of break are a safety injection system line break, shutdown cooling system line break, and pressurizer safety valve line break. The thermal–hydraulic phenomena show a traditional behavior to decrease the temperature and pressure whereas the local phenomena are slightly different during the early stage of the transient after a break simulation. A safety injection using a high-pressure pump effectively cools down and recovers the inventory of a reactor coolant system. The global trends show reproducible results for an SBLOCA scenario with three different break locations. It was confirmed that the safety injection system is robustly safe enough to protect from a core uncovery.

  18. Comparison of three small-break loss-of-coolant accident tests with different break locations using the system-integrated modular advanced reactor-integral test loop facility to estimate the safety of the smart design

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Hwang; Ryu, Sung Uk; Yi, Sung Jae; Park, Hyun Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Dong Eok [Dept. of Precision Mechanical Engineering, Kyungpook National University, Sangju (Korea, Republic of)

    2017-08-15

    Three small-break loss-of-coolant accident (SBLOCA) tests with safety injection pumps were carried out using the integral-effect test loop for SMART (System-integrated Modular Advanced ReacTor), i.e., the SMART-ITL facility. The types of break are a safety injection system line break, shutdown cooling system line break, and pressurizer safety valve line break. The thermal–hydraulic phenomena show a traditional behavior to decrease the temperature and pressure whereas the local phenomena are slightly different during the early stage of the transient after a break simulation. A safety injection using a high-pressure pump effectively cools down and recovers the inventory of a reactor coolant system. The global trends show reproducible results for an SBLOCA scenario with three different break locations. It was confirmed that the safety injection system is robustly safe enough to protect from a core uncovery.

  19. Asbestos quantification in track ballast, a complex analytical problem

    Science.gov (United States)

    Cavallo, Alessandro

    2016-04-01

    Track ballast forms the trackbeb upon which railroad ties are laid. It is used to bear the load from the railroad ties, to facilitate water drainage, and also to keep down vegetation. It is typically made of angular crushed stone, with a grain size between 30 and 60 mm, with good mechanical properties (high compressive strength, freeze - thaw resistance, resistance to fragmentation). The most common rock types are represented by basalts, porphyries, orthogneisses, some carbonatic rocks and "green stones" (serpentinites, prasinites, amphibolites, metagabbros). Especially "green stones" may contain traces, and sometimes appreciable amounts of asbestiform minerals (chrysotile and/or fibrous amphiboles, generally tremolite - actinolite). In Italy, the chrysotile asbestos mine in Balangero (Turin) produced over 5 Mt railroad ballast (crushed serpentinites), which was used for the railways in northern and central Italy, from 1930 up to 1990. In addition to Balangero, several other serpentinite and prasinite quarries (e.g. Emilia Romagna) provided the railways ballast up to the year 2000. The legal threshold for asbestos content in track ballast is established in 1000 ppm: if the value is below this threshold, the material can be reused, otherwise it must be disposed of as hazardous waste, with very high costs. The quantitative asbestos determination in rocks is a very complex analytical issue: although techniques like TEM-SAED and micro-Raman are very effective in the identification of asbestos minerals, a quantitative determination on bulk materials is almost impossible or really expensive and time consuming. Another problem is represented by the discrimination of asbestiform minerals (e.g. chrysotile, asbestiform amphiboles) from the common acicular - pseudo-fibrous varieties (lamellar serpentine minerals, prismatic/acicular amphiboles). In this work, more than 200 samples from the main Italian rail yards were characterized by a combined use of XRD and a special SEM

  20. Comparison of asbestos-associated respiratory disease by medical examination between shipyard retiree and workers of active service with asbestos exposure

    International Nuclear Information System (INIS)

    Ikeda, Tooru; Yoshida, Toshiaki; Fujisawa, Hiroyuki; Tanaka, Ayako; Ikeda, Hideki; Kawano, Hiroaki

    2009-01-01

    We examined 407 shipyard workers with asbestos exposure (406 men and one woman; mean age, 60.4 years) for asbestos-associated respiratory disease using the multi-slice chest CT in addition to the regular examinations. After the examination, workers with suspicion of malignancy by the multi-slice CT, other examinations including biopsy were performed to make the final diagnosis. We divided these people into two groups as follows; retiree (133 cases, 132 men and one woman; mean age, 65.9 years) and workers of shipyard active service (274 cases, all men, mean age, 57.6 years). We compared the incidence of asbestos-associated respiratory disease, age, incubation time and work period at asbestos exposure in these two groups. 97 of 133 (72.9%) retired workers and 94 of 274 (34.4%) active service had asbestos-associated respiratory disease as follows: pleural plaque without calcification, 25 cases (18.8%) (retired) and 35 (12.8%) (active service); pleural plaque with calcification, 65 (48.7%) and 51 (18.6%); diffuse pleural thickening, 0 (0%) and 0 (0%); asbestosis, 5 (3.8%) and 6 (2.2%); lung cancer, 1 case (0.8%) and 2 cases (0.7%) and malignant pleural mesothelioma 1 case (0.8%) and none (0%). The rate of workers with total asbestos-associated respiratory disease in the retired group was significantly higher than that in active service (P<0.01). Especially pleural plaque with calcification were detected more in shipyard retired workers than active service workers. The incidence of pleural plaque is related to age and incubation time but not to work period at asbestos exposure. (author)

  1. A step by step selection method for the location and the size of a waste-to-energy facility targeting the maximum output energy and minimization of gate fee.

    Science.gov (United States)

    Kyriakis, Efstathios; Psomopoulos, Constantinos; Kokkotis, Panagiotis; Bourtsalas, Athanasios; Themelis, Nikolaos

    2017-06-23

    This study attempts the development of an algorithm in order to present a step by step selection method for the location and the size of a waste-to-energy facility targeting the maximum output energy, also considering the basic obstacle which is in many cases, the gate fee. Various parameters identified and evaluated in order to formulate the proposed decision making method in the form of an algorithm. The principle simulation input is the amount of municipal solid wastes (MSW) available for incineration and along with its net calorific value are the most important factors for the feasibility of the plant. Moreover, the research is focused both on the parameters that could increase the energy production and those that affect the R1 energy efficiency factor. Estimation of the final gate fee is achieved through the economic analysis of the entire project by investigating both expenses and revenues which are expected according to the selected site and outputs of the facility. In this point, a number of commonly revenue methods were included in the algorithm. The developed algorithm has been validated using three case studies in Greece-Athens, Thessaloniki, and Central Greece, where the cities of Larisa and Volos have been selected for the application of the proposed decision making tool. These case studies were selected based on a previous publication made by two of the authors, in which these areas where examined. Results reveal that the development of a «solid» methodological approach in selecting the site and the size of waste-to-energy (WtE) facility can be feasible. However, the maximization of the energy efficiency factor R1 requires high utilization factors while the minimization of the final gate fee requires high R1 and high metals recovery from the bottom ash as well as economic exploitation of recovered raw materials if any.

  2. VT School Locations - K-12

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) FacilitiesSchools_PTSCHOOL is designed to provide point locations of every Vermont School along with the established school ID (PSID) for...

  3. Gene Locater

    DEFF Research Database (Denmark)

    Anwar, Muhammad Zohaib; Sehar, Anoosha; Rehman, Inayat-Ur

    2012-01-01

    software's for calculating recombination frequency is mostly limited to the range and flexibility of this type of analysis. GENE LOCATER is a fully customizable program for calculating recombination frequency, written in JAVA. Through an easy-to-use interface, GENE LOCATOR allows users a high degree...... of flexibility in calculating genetic linkage and displaying linkage group. Among other features, this software enables user to identify linkage groups with output visualized graphically. The program calculates interference and coefficient of coincidence with elevated accuracy in sample datasets. AVAILABILITY...

  4. Facility Location with Double-peaked Preferences

    DEFF Research Database (Denmark)

    Filos-Ratsikas, Aris; Li, Minming; Zhang, Jie

    2015-01-01

    ; this makes the problem essentially more challenging. As our main contribution, we present a simple truthful-in-expectation mechanism that achieves an approximation ratio of 1+b=c for both the social and the maximum, cost, where b is the distance of the agent from the peak and c is the minimum cost...

  5. Expert group formation using facility location analysis

    NARCIS (Netherlands)

    Neshati, M.; Beigy, H.; Hiemstra, Djoerd

    In this paper, we propose an optimization framework to retrieve an optimal group of experts to perform a multi-aspect task. While a diverse set of skills are needed to perform a multi-aspect task, the group of assigned experts should be able to collectively cover all these required skills. We

  6. Expert group formation using facility location analysis

    NARCIS (Netherlands)

    Neshati, Mahmood; Beigy, Hamid; Hiemstra, Djoerd

    2014-01-01

    In this paper, we propose an optimization framework to retrieve an optimal group of experts to perform a multi-aspect task. While a diverse set of skills are needed to perform a multi-aspect task, the group of assigned experts should be able to collectively cover all these required skills. We

  7. Small Craft Facility Locations - USACE IENC

    Data.gov (United States)

    Department of Homeland Security — These inland electronic Navigational charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...

  8. VT US EPA Regulated Facilities Point Locations

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The EnvironPollution_ENVPTS2001 data layer is based on the U.S. EPA's Envirofacts point shapefile. The data was provided to VCGI by the Vermont...

  9. CT Characteristics of Pleural Plaques Related to Occupational or Environmental Asbestos Exposure from South Korean Asbestos Mines.

    Science.gov (United States)

    Kim, Yookyung; Myong, Jun-Pyo; Lee, Jeong Kyong; Kim, Jeung Sook; Kim, Yoon Kyung; Jung, Soon-Hee

    2015-01-01

    This study evaluated the CT characteristics of pleural plaques in asbestos-exposed individuals and compared occupational versus environmental exposure groups. This study enrolled 181 subjects with occupational exposure and 98 with environmental exposure from chrysotile asbestos mines, who had pleural plaques confirmed by a chest CT. The CT scans were analyzed for morphological characteristics, the number and distribution of pleural plaques and combined pulmonary fibrosis. Furthermore, the CT findings were compared between the occupational and environmental exposure groups. Concerning the 279 subjects, the pleural plaques were single in 2.2% and unilateral in 3.6%, and showed variable widths (range, 1-20 mm; mean, 5.4 ± 2.7 mm) and lengths (5-310 mm; 72.6 ± 54.8 mm). The chest wall was the most commonly involved (98.6%), with an upper predominance on the ventral side (upper, 77.8% vs. lower, 55.9%, p occupational exposure group (p environmentally exposed individuals.

  10. Temporal Patterns of Exposure to Asbestos and Risk of Asbestosis: An Analysis of a Cohort of Asbestos Textile Workers.

    Science.gov (United States)

    Farioli, Andrea; Violante, Francesco S; La Vecchia, Carlo; Negri, Eva; Pelucchi, Claudio; Spatari, Giovanna; Boffetta, Paolo; Pira, Enrico

    2018-01-12

    The aim of the study was to assess the risk of asbestosis death based on the temporal pattern of exposure to asbestos. We followed up a cohort of asbestos textile workers, employed in 1946 to 1984, until November 2013. We measured the duration of the employment, the time since last employment (TSLE), the age, and the year of first employment. Hazard ratios (HR) were estimated through multivariable Cox regression models. We observed 51 asbestosis deaths among 1823 workers. The HR of asbestosis death increased with exposure duration (HR 2.4 for ≥15 years compared with <5 years, P trend = 0.014) and declined with TSLE (HR 0.3 for ≥25 compared with <5 years, P = 0.004). The risk of asbestosis mortality strongly declined for exposure starting after 1968. The risk of asbestosis death strongly declines in the decades after cessation of the exposure.This is an open access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal. http://creativecommons.org/licenses/by-nc-nd/4.0.

  11. Geospatial Data Analysis Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Geospatial application development, location-based services, spatial modeling, and spatial analysis are examples of the many research applications that this facility...

  12. Pavement Testing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Comprehensive Environmental and Structural AnalysesThe ERDC Pavement Testing Facility, located on the ERDC Vicksburg campus, was originally constructed to provide an...

  13. Characterization of vehicular brake service personnel exposure to airborne asbestos and particulate.

    Science.gov (United States)

    Weir, F W; Tolar, G; Meraz, L B

    2001-12-01

    Evaluation of fibers and total particulate generated during the servicing of drum brakes on motor vehicles as well as during the resurfacing (arcing) of brake shoes was conducted. Conditions for the studies were based on review of contemporary (approximately 1950-1980) working practices in the industry. This work was conducted in two parts. Phase 1 estimated the release of asbestos fibers and total particulate during brake inspection and replacement of light-duty vehicle rear drum brakes at an auto/truck repair facility. Two distinct work practices were evaluated: One rear wheel from each vehicle was serviced using compressed air to remove dust while the second rear wheel was serviced without compressed air. Area and personal monitoring of fiber levels demonstrated counts (without compressed air) that ranged from 0.05 to 0.2 f/cc. Fiber counts when using compressed air averaged from 0.05 to 0.9 f/cc. Results from real-time aerosol monitoring indicated elevated dust levels for about 15 minutes after blow out. With shop doors open, dust levels increased to 5.0 mg/m3 at blow out and returned to 0.08 mg/m3 within two minutes. When the shop doors were closed, the dust levels reached 13.5 mg/m3 at blow out and decreased to 1.68 mg/m3 within one minute and to background within 14 minutes. The Phase 2 series evaluated the release of fibers and other particulate from are grinding. For operations conducted under conditions simulating a workplace, a mean of 0.19 f/cc +/- 0.16 was determined. Dust levels averaged 0.25 mg/m3 +/- 0.05. Brake service monitoring in these tests demonstrates that asbestos fiber concentrations, considered on a time weighted average basis, should not exceed currently acceptable workplace standards whether or not the worker uses compressed air, nor during the arc grinding process when arcing is conducted in accord with the design of the equipment.

  14. Anxious and depressive symptoms in the French Asbestos-Related Diseases Cohort: risk factors and self-perception of risk.

    Science.gov (United States)

    Mounchetrou Njoya, Ibrahim; Paris, Christophe; Dinet, Jerome; Luc, Amandine; Lighezzolo-Alnot, Joelle; Pairon, Jean-Claude; Thaon, Isabelle

    2017-04-01

    Asbestos is known to be an independent risk factor for lung and pleural cancers. However, to date, little attention has been paid to the psychological effects of asbestos exposure among exposed subjects. The objectives of this study were to estimate the prevalence of anxious and depressive symptoms among >2000 French participants of the Asbestos-Related Diseases Cohort (ARDCO), 6 years after their inclusion, to identify the risk factors associated with those anxious and depressive symptoms and to evaluate the impact of the asbestos-risk perception. The ARDCO was constituted in four regions of France between October 2003 and December 2005, by including former asbestos workers. Between 2011 and 2012, participants of the ARDCO program were invited to undergo another chest CT scan 6 years after the previous scan. Participants were asked to complete questionnaires including asbestos exposure assessment, Hospital Anxiety and Depression Scale (HADS), asbestos-risk perception and self-perception of asbestos-related diseases. Among the 2225 participants, 2210 fully completed questionnaires were collected and analyzed. The prevalence of symptoms of probable anxiety and probable depression was 19.7% and 9.9%, respectively. The risk of anxious and depressive symptoms was independently associated with self-perception of the intensity of asbestos exposure, asbestos-risk perception and self-perception of asbestos-related diseases. The results obtained in this large study confirm that previously asbestos-exposed subjects are likely to develop anxious and depressive symptoms. Finally, implications related to the prevention of anxiety and depression among asbestos-exposed workers is discussed. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  15. How EPA's Asbestos Regulations Apply to Residential Buildings Used for Fire Training

    Science.gov (United States)

    Memos and guidance from the Office of Air Quality Planning and Standards that clarify how the Asbestos National Emissions Standard for Hazardous Air Pollutants applies to residential buildings used for fire training, also known as acquired structures.

  16. Biologic Effects of Atmospheric Pollutants: Asbestos - The Need For and Feasibility of Air Pollution Controls

    Science.gov (United States)

    This 1971 report sets forth in a well-organized fashion the currently available information on asbestos as an air pollutant, with special attention to sources health effects, measurements, and feasibility of control.

  17. Notification: Notification Memo for Evaluation of Management Controls for Alternative Asbestos Control Method Experiments

    Science.gov (United States)

    Project #OPE-FY12-0011, February 27, 2012. This memorandum is to notify you that the Office of Inspector General (OIG) is initiating an evaluation on the Alternative Asbestos Control Method (AACM) experiments.

  18. Underground Storage Tanks - Storage Tank Locations

    Data.gov (United States)

    NSGIC Education | GIS Inventory — A Storage Tank Location is a DEP primary facility type, and its sole sub-facility is the storage tank itself. Storage tanks are aboveground or underground, and are...

  19. Occurrence and Mineralogical Characteristics of Tremolite Asbestos Occurred in Boryeong area, Chungnam, South Korea

    Science.gov (United States)

    Yoon, K.; Hwang, J.; Oh, J.; Lee, H.

    2009-12-01

    Abandoned tremolite mines, which had been exploited for several decades since 1930, are distributed in Boryeong, Chungnam. It is known that tremolite asbestos is approximately 100 times more harmful than chrysotile asbestos. Recently, it become a regional social problem because lung disease (mesothelioma and lung cancer) suspect patients are largely found among the residents of the mining area. Therefore, Korean government making every endeavor to remove asbestos risk in the area. However, there is insufficiency geological and mineralogical studies for tremolite asbestos. In the present study, the occurrence and mineralogical characteristics of tremolite asbestos were studied using polarization microscope, XRD, XRF, EPMA, SEM and TEM. Mica-schist of precambrian metasedimentary rock, which is widely distributed in the area, is the host rock of tremolite deposits. The rocks are largely disturbed by faults and folds, and shows sudden changes in strike and slope of strata. Tremolite ore bodies, which show relatively light colored, mainly occur as stratiform or veinlet and some occurs in brecciated rock fragments. Tremolite is a major asbestos mineral, and chrysotile, talc, mica, chlorite and quartz occurs as associated minerals. Considerable amount of ore containing pure tremolite is found, and ores having mineral assemblages of tremolite+talc, tremolite+quartz and chrysotile+talc also occurs. From optical microscope observations, most tremolites are asbestos from that meets to the criterion (length > 5 μm, diameter 3:1) defined by the international organization (WHO, ILO), but non-asbestos form tremolites are also included. Most asbestos form tremolites have the size range of 1.0-2.0 μm width and 5-10 μm length. The length can be shorten with crushing experiments, but the width remains unchanged. Non-asbestos form hardly change to asbestos form by mechanical crushing. From comprehensive studies for geological occurrence and mineral assemblage, it is considered that

  20. Asbestos-related occupational cancers compensated under the Industrial Accident Compensation Insurance in Korea.

    Science.gov (United States)

    Ahn, Yeon-Soon; Kang, Seong-Kyu

    2009-04-01

    Compensation for asbestos-related cancers occurring in occupationally-exposed workers is a global issue; this is also an issue in Korea. To provide basic information regarding compensation for workers exposed to asbestos, 60 cases of asbestos-related occupational lung cancer and mesothelioma that were compensated during 15 yr; from 1993 (the year the first case was compensated) to 2007 by the Korea Labor Welfare Corporation (KLWC) are described. The characteristics of the cases were analyzed using the KLWC electronic data and the epidemiologic investigation data conducted by the Occupational Safety and Health Research Institute (OSHRI) of the Korea Occupational Safety and Health Agency (KOSHA). The KLWC approved compensation for 41 cases of lung cancer and 19 cases of mesothelioma. Males accounted for 91.7% (55 cases) of the approved cases. The most common age group was 50-59 yr (45.0%). The mean duration of asbestos exposure for lung cancer and mesothelioma cases was 19.2 and 16.0 yr, respectively. The mean latency period for lung cancer and mesothelioma cases was 22.1 and 22.6 yr, respectively. The major industries associated with mesothelioma cases were shipbuilding and maintenance (4 cases) and manufacture of asbestos textiles (3 cases). The major industries associated with lung cancer cases were shipbuilding and maintenance (7 cases), construction (6 cases), and manufacture of basic metals (4 cases). The statistics pertaining to asbestos-related occupational cancers in Korea differ from other developed countries in that more cases of mesothelioma were compensated than lung cancer cases. Also, the mean latency period for disease onset was shorter than reported by existing epidemiologic studies; this discrepancy may be related to the short history of occupational asbestos use in Korea. Considering the current Korean use of asbestos, the number of compensated cases in Korea is expected to increase in the future but not as much as developed countries.

  1. Occupational characteristics of cases with asbestos-related diseases in The Netherlands

    OpenAIRE

    Burdorf, Alex; Dahhan, M.; Swuste, Paul

    2003-01-01

    textabstractOBJECTIVE: To describe the occupational background of cases with an asbestos-related disease and to present overall mesothelioma risks across industries with historical exposure to asbestos. METHODS: For the period 1990-2000, cases were collected from records held by two law firms. Information on jobs held, previous employers, activities performed and specific products used were obtained from patients themselves or next of kin. Branches of industry and occupations were coded and t...

  2. Acid leaching of natural chrysotile asbestos to mesoporous silica fibers

    Science.gov (United States)

    Maletaškić, Jelena; Stanković, Nadežda; Daneu, Nina; Babić, Biljana; Stoiljković, Milovan; Yoshida, Katsumi; Matović, Branko

    2018-04-01

    Nanofibrous silica with a high surface area was produced from chrysotile by the acid-leaching method. Natural mineral chrysotile asbestos from Stragari, Korlace in Serbia was used as the starting material. The fibers were modified by chemical treatment with 1 M HCl and the mineral dissolution was monitored by transmission electron microscopy, X-ray powder diffraction, inductively coupled plasma spectrometry and low-temperature nitrogen adsorption techniques to highlight the effects of the leaching process. The results showed that the applied concentration of acid solution and processing time of 4 h were sufficient to effectively remove the magnesium hydroxide layer and transform the crystal structure of the hazardous starting chrysotile to porous SiO2 nanofibers. With prolonged acid leaching, the specific surface area, S BET, calculated by BET equation, was increased from 147 up to 435 m2 g- 1, with micropores representing a significant part of the specific surface.

  3. On Corporate Accountability: Lead, Asbestos, and Fossil Fuel Lawsuits.

    Science.gov (United States)

    Shearer, Christine

    2015-08-01

    This paper examines the use of lawsuits against three industries that were eventually found to be selling products damaging to human heath and the environment: lead paint, asbestos, and fossil fuels. These industries are similar in that some companies tried to hide or distort information showing their products were harmful. Common law claims were eventually filed to hold the corporations accountable and compensate the injured. This paper considers the important role the lawsuits played in helping establish some accountability for the industries while also noting the limitations of the lawsuits. It will be argued that the lawsuits helped create pressure for government regulation of the industries' products but were less successful at securing compensation for the injured. Thus, the common law claims strengthened and supported administrative regulation and the adoption of industry alternatives more than they provided a means of legal redress. © The Author(s) 2015.

  4. Asbestos: a perspective. I. An overview. II. An annotated literature collection, 1960--1974. III. A literature compilation, 1974--1977. [Health hazards

    Energy Technology Data Exchange (ETDEWEB)

    Huff, J.E.; Hammons, A.S.; Dinger, C.Y.; Kline, B.W.; Whitfield, B.L.; Black, S.A.

    1978-03-01

    Although the general population is widely exposed to asbestos, both by inhalation and ingestion, the hazards of chronic, environmental exposure have not been determined. Reasons conflict but are attributed in part to a paucity of information on human dose response, effects of asbestos ingestion, ambient concentrations and distribution of asbestos in the environment, the environmental cycling of asbestos, and related biological interactions including transmission through foodchains. As distilled from the world's asbestos literature, conclusions representing a majority opinion on the pathological effects of asbestos on man are summarized. (38 references.)

  5. Legal aspects of workers' health protection against asbestos in Poland in the light of the EU legal framework

    Directory of Open Access Journals (Sweden)

    Beata Świątkowska

    2013-10-01

    Full Text Available Legal protection of human life and health against asbestos dust-related hazards is carried out in various dimensions of the European Union law mainly focused on health protection of employees and responsibilities of employers, as well as on environmental protection. The aim of this paper is to present the Community legal issues emphasizing the protection of workers against asbestos and discuss the current state of Polish law in this regard. An analysis of recent legal solutions provides a comprehensive look at the extensive steps currently taken to reduce the risk of exposure to asbestos dust. The legislation in the European Union, including Poland indicates sound foundations for assuring health and safety of workers still exposed to asbestos and those formerly employed in asbestos processing plants. It is only postulated to unify high standards of healthcare to provide all workers employed in asbestos exposure with equal and particular legal protection. Med Pr 2013;64(5:689–697

  6. Environmental exposure to asbestos and other inorganic fibres using animal lung model

    Energy Technology Data Exchange (ETDEWEB)

    Fornero, Elisa [Dipartimento di Scienze dell' Ambiente e della Vita, Universita del Piemonte Orientale ' A. Avogadro' , Via Bellini 25/g, 15100 Alessandria (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy)], E-mail: elisa.fornero@mfn.unipmn.it; Belluso, Elena [Dipartimento di Scienze Mineralogiche e Petrologiche, Universita degli Studi di Torino, Via V. Caluso 35, 10125 Torino (Italy); Istituto di Geoscienze e Georisorse, CNR-Unita di Torino, Via V. Caluso 35, 10125 Torino (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy); Capella, Silvana [Dipartimento di Scienze Mineralogiche e Petrologiche, Universita degli Studi di Torino, Via V. Caluso 35, 10125 Torino (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy); Bellis, Donata [Servizio di Anatomia, Istologia Patologica e Citodiagnostica, Azienda Ospedaliera San Giovanni Bosco, ASLTO2 Piazza Donatori del Sangue 3, 10154 Torino (Italy); Centro Interdipartimentale per lo Studio degli Amianti e di altri Particolati Nocivi ' Giovanni Scansetti' , Universita degli Studi di Torino, Torino (Italy)

    2009-01-15

    Professional exposure to asbestos fibres is widely recognized as very dangerous to human health and for this reason many countries have banned their commercial uses. People, nevertheless, continue to be exposed to low dose of asbestos from natural and anthropogenic sources still in loco, for which the potential hazard is unknown. The aim of this research is to assess environmental exposure in an area with outcropping serpentinite rocks, which bear asbestos mineralizations, using sentinel animals which are a non-experimental animal model. We studied the burden of inorganic fibres in cattle lungs which come from two areas in Italy's Western Alps bearing serpentinitic outcrops: Susa Valley with a heavy anthropization and Lanzo Valleys, with a minor human impact. The identification and quantification of inorganic fibres were performed by Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS). In comparison to humans, studies of animals have some advantages, such as no occupational exposure or history of smoking and, in the case of cattle, a sedentary life restricted to one region. Results spotlight that over than 35% of inorganic fibres found both in Susa and Lanzo valleys, belong to asbestos mineralogical species (asbestos tremolite/actinolite, chrysotile s.s., asbestos grunerite, crocidolite). We also observed a higher concentration of artificial fibrous products in Susa samples showing a correlation with the level of anthropization. These results confirm that sentinel animals are an excellent model to assess breathable environmental background because it is possible to eliminate some variables, such as unknown occupational exposure.

  7. The Asbestos Ban in Korea from a Grassroots Perspective: Why Did It Occur?

    Directory of Open Access Journals (Sweden)

    Yu-Ryong Yoon

    2018-01-01

    Full Text Available In 2009, asbestos was finally banned in Korea, about 70 years after the first opening of asbestos mines under Japanese control. After having presented the history of asbestos industry, together with its regulations and health effects over time, we constructed narrative analyses of how the asbestos issue under the prevailing risk system was managed by whom and for what purpose, to provide context for the change. We could identify five different phases: laissez-faire, politico-technical, economic–managerial, health-oriented cultural, and human rights-based post-cultural risk systems. The changes leading to the asbestos ban evolved over different phases, and each phase change was necessary to reach the final ban, in that, without resolving the previous issues by examining different categories of potential alternatives, either the final ban was not possible or, even if instituted, could not be sustained. An asbestos ban could be introduced when all the alternatives to these issues, including legitimate political windows, economic rationalizations, health risk protections, and human rights sensitivities, were available. We think the alternatives that we had were not in perfect shape, but in more or less loosely connected forms, and hence we had to know how to build solidarities between different stakeholders to compensate for the imperfections.

  8. Asbestos-related occupational cancers compensated under the Spanish National Insurance System, 1978-2011.

    Science.gov (United States)

    García-Gómez, Montserrat; Menéndez-Navarro, Alfredo; López, Rosario Castañeda

    2015-01-01

    In 1978, asbestos-related occupational cancers were added to the Spanish list of occupational diseases. However, there are no full accounts of compensated cases since their inclusion. To analyze the cases of asbestos-related cancer recognized as occupational in Spain between 1978 and 2011. Cases were obtained from the Spanish Employment Ministry. Specific incidence rates by year, economic activity, and occupation were obtained. We compared mortality rates of mesothelioma and bronchus and lung cancer mortality in Spain and the European Union. Between 1978 and 2011, 164 asbestos-related occupational cancers were recognized in Spain, with a mean annual rate of 0·08 per 10(5) employees (0·13 in males, 0·002 in females). Under-recognition rates were an estimated 93·6% (males) and 99·7% (females) for pleural mesothelioma and 98·8% (males) and 100% (females) for bronchus and lung cancer. In Europe for the year 2000, asbestos-related occupational cancer rates ranged from 0·04 per 10(5) employees in Spain to 7·32 per 10(5) employees in Norway. These findings provide evidence of gross under-recognition of asbestos-related occupational cancers in Spain. Future work should investigate cases treated in the National Healthcare System to better establish the impact of asbestos on health in Spain.

  9. Asbestos fibre concentrations in the lungs of brake workers: another look.

    Science.gov (United States)

    Finkelstein, Murray M

    2008-08-01

    To reanalyse data on the lung content of asbestos fibres among brake mechanics. I re-analysed data published by Butnor, Roggli and colleagues on the lung content of chrysotile and tremolite asbestos fibres among brake mechanics and controls. Statistics of the distributions were estimated by maximum likelihood to accommodate observations below the detection limit. Mean concentrations were compared by the t-test, bootstrap resampling and interval-censored survival methods. The mean concentrations of fibres were higher among the brake workers than the controls. The concentration of tremolite fibres was higher than the concentration of chrysotile, a pattern similar to that observed among Quebec chrysotile miners and millers. Re-analysis of published data does not support the interpretation that, in automotive brake repair workers with malignant mesothelioma, asbestos content is within the normal range. The alternative interpretation that brake mechanics have a greater than background burden of asbestos fibres, attributable to occupational exposure to dusts from friction products manufactured from Canadian chrysotile, appears more credible. This asbestos burden might be associated with an increased risk of asbestos-associated cancers.

  10. Mechanisms of macrophage accumulation in the lungs of asbestos-exposed subjects

    International Nuclear Information System (INIS)

    Spurzem, J.R.; Saltini, C.; Rom, W.; Winchester, R.J.; Crystal, R.G.

    1987-01-01

    Chronic asbestos exposure is associated with the accumulation of mononuclear phagocytes in the lower respiratory tract. This process can be both protective and injurious, since macrophages can aid in asbestos clearance yet also modulate structural derangements of the alveolar walls. To understand why macrophages accumulate in the lungs of asbestos-exposed persons, 2 possible mechanisms were evaluated using alveolar macrophages from subjects with histories of chronic high exposure to airborne asbestos: enhanced recruitment of blood monocytes to the lung, and an increased rate of replication of macrophages in situ. Monoclonal antibody analysis with antibodies that detect surface antigens on the majority of circulating blood monocytes but only on a minority of mature alveolar macrophages demonstrated that an increased proportion of alveolar macrophages of asbestos workers expressed monocyte lineage antigens, suggesting the presence of young newly recruited macrophages and thus enhanced recruitment. Culture of the alveolar macrophages from these subjects with [ 3 H]thymidine followed by autoradiography demonstrated an increased proportion of alveolar macrophages synthesizing DNA, suggesting the macrophages are replicating at an increased rate in situ. These observations are consistent with the concept that both enhanced recruitment of blood monocytes and increased local proliferation of alveolar macrophages contribute to the accumulation mononuclear phagocytes in the lung of persons with chronic asbestos exposure

  11. Environmental exposure to asbestos and other inorganic fibres using animal lung model

    International Nuclear Information System (INIS)

    Fornero, Elisa; Belluso, Elena; Capella, Silvana; Bellis, Donata

    2009-01-01

    Professional exposure to asbestos fibres is widely recognized as very dangerous to human health and for this reason many countries have banned their commercial uses. People, nevertheless, continue to be exposed to low dose of asbestos from natural and anthropogenic sources still in loco, for which the potential hazard is unknown. The aim of this research is to assess environmental exposure in an area with outcropping serpentinite rocks, which bear asbestos mineralizations, using sentinel animals which are a non-experimental animal model. We studied the burden of inorganic fibres in cattle lungs which come from two areas in Italy's Western Alps bearing serpentinitic outcrops: Susa Valley with a heavy anthropization and Lanzo Valleys, with a minor human impact. The identification and quantification of inorganic fibres were performed by Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS). In comparison to humans, studies of animals have some advantages, such as no occupational exposure or history of smoking and, in the case of cattle, a sedentary life restricted to one region. Results spotlight that over than 35% of inorganic fibres found both in Susa and Lanzo valleys, belong to asbestos mineralogical species (asbestos tremolite/actinolite, chrysotile s.s., asbestos grunerite, crocidolite). We also observed a higher concentration of artificial fibrous products in Susa samples showing a correlation with the level of anthropization. These results confirm that sentinel animals are an excellent model to assess breathable environmental background because it is possible to eliminate some variables, such as unknown occupational exposure

  12. ROS-mediated genotoxicity of asbestos-cement in mammalian lung cells in vitro

    Directory of Open Access Journals (Sweden)

    Rödelsperger Klaus

    2005-10-01

    Full Text Available Abstract Asbestos is a known carcinogen and co-carcinogen. It is a persisting risk in our daily life due to its use in building material as asbestos-cement powder. The present study done on V79-cells (Chinese hamster lung cells demonstrates the cytotoxic and genotoxic potential of asbestos-cement powder (ACP in comparison with chrysotile asbestos. A co-exposure of chrysotile and ACP was tested using the cell viability test and the micronucleus assay. The kinetochore analysis had been used to analyse the pathway causing such genotoxic effects. Thiobarbituric acid-reactive substances were determined as evidence for the production of reactive oxygen species. Both, asbestos cement as well as chrysotile formed micronuclei and induced loss of cell viability in a concentration- and time- dependent way. Results of TBARS analysis and iron chelator experiments showed induction of free radicals in ACP- and chrysotile exposed cultures. CaSO4 appeared to be a negligible entity in enhancing the toxic potential of ACP. The co-exposure of both, ACP and chrysotile, showed an additive effect in enhancing the toxicity. The overall study suggests that asbestos-cement is cytotoxic as well as genotoxic in vitro. In comparison to chrysotile the magnitude of the toxicity was less, but co-exposure increased the toxicity of both.

  13. Pleural mesothelioma and lung cancer risks in relation to occupational history and asbestos lung burden

    Science.gov (United States)

    Gilham, Clare; Rake, Christine; Burdett, Garry; Nicholson, Andrew G; Davison, Leslie; Franchini, Angelo; Carpenter, James; Hodgson, John; Darnton, Andrew; Peto, Julian

    2016-01-01

    Background We have conducted a population-based study of pleural mesothelioma patients with occupational histories and measured asbestos lung burdens in occupationally exposed workers and in the general population. The relationship between lung burden and risk, particularly at environmental exposure levels, will enable future mesothelioma rates in people born after 1965 who never installed asbestos to be predicted from their asbestos lung burdens. Methods Following personal interview asbestos fibres longer than 5 µm were counted by transmission electron microscopy in lung samples obtained from 133 patients with mesothelioma and 262 patients with lung cancer. ORs for mesothelioma were converted to lifetime risks. Results Lifetime mesothelioma risk is approximately 0.02% per 1000 amphibole fibres per gram of dry lung tissue over a more than 100-fold range, from 1 to 4 in the most heavily exposed building workers to less than 1 in 500 in most of the population. The asbestos fibres counted were amosite (75%), crocidolite (18%), other amphiboles (5%) and chrysotile (2%). Conclusions The approximate linearity of the dose–response together with lung burden measurements in younger people will provide reasonably reliable predictions of future mesothelioma rates in those born since 1965 whose risks cannot yet be seen in national rates. Burdens in those born more recently will indicate the continuing occupational and environmental hazards under current asbestos control regulations. Our results confirm the major contribution of amosite to UK mesothelioma incidence and the substantial contribution of non-occupational exposure, particularly in women. PMID:26715106

  14. Implementation of a geological disposal facility (GDF) in the UK by the NDA Radioactive Waste Management Directorate (RWMD): the potential for interaction between the co-located ILW/LLW and HLW/SF components of a GDF - 16306

    International Nuclear Information System (INIS)

    Towler, George; Hicks, Tim; Watson, Sarah; Norris, Simon

    2009-01-01

    In June 2008 the UK government published a 'White Paper' as part of the 'Managing Radioactive Waste Safety' (MRWS) programme to provide a framework for managing higher activity radioactive wastes in the long-term through geological disposal. The White Paper identifies that there are benefits to disposing all of the UK's higher activity wastes (Low and Intermediate Level Waste (LLW and ILW), High Level Waste (HLW), Spent Fuel (SF), Uranium (U) and Plutonium (Pu)) at the same site, and this is currently the preferred option. It also notes that research will be required to support the detailed design and safety assessment in relation to any potentially detrimental interactions between the different modules. Different disposal system designs and associated Engineered Barrier Systems (EBS) will be required for these different waste types, i.e. ILW/LLW and HLW/SF. If declared as waste U would be disposed as ILW and Pu as HLW/SF. The Geological Disposal Facility (GDF) would therefore comprise two co-located modules (respectively for ILW/LLW and HLW/SF). This paper presents an overview of a study undertaken to assess the implications of co-location by identifying the key Thermo-Hydro-Mechanical-Chemical (THMC) interactions that might occur during both the operational and post-closure phases, and their consequences for GDF design, performance and safety. The MRWS programme is currently seeking expressions of interest from communities to host a GDF. Therefore, the study was required to consider a wide range of potential GDF host rocks and consistent, conceptual disposal system designs. Two example disposal concepts (i.e. combinations of host rock, GDF design including wasteform and layout, etc.) were carried forward for detailed assessment and a third for qualitative analysis. Dimensional and 1D analyses were used to identify the key interactions, and 3D models were used to investigate selected interactions in more detail. The results of this study show that it is possible

  15. FIBROHOOD: 'The Lost Linoleum Highway' commythology: mythology and comics as a means of creating awareness about asbestos

    OpenAIRE

    Roszak, Paul

    2017-01-01

    Asbestos remains one of the greatest man made industrial disasters ever that will eventually claim over 10 million lives through asbestos related disease. This silent killer still lurks within millions of domestic and commercial orbits across the globe. The pro-asbestos industry has both formally used and currently still uses myth as an agent to disguise this A1 grade carcinogen as being safe. The industry and its allies were, and in some nations still are, successful in suppressing the dange...

  16. Location Based Services and Applications

    OpenAIRE

    Elenis Gorrita Michel; Rónier Sierra Dávila; Samuel Montejo Sánchez

    2012-01-01

    Location Based Services (LBS) continue to grow in popularity, effectiveness and reliability, to the extent that applications are designed and implemented taking into account the facilities of the user location information. In this work, some of the main applications are addressed, in order to make an assessment of the current importance of the LBS, as a branch of technology in full swing. In addition, the main techniques for location estimation are studied, essential information to the LBS. B...

  17. Direct observation and determination of the mechanisms governing mobility of asbestos in porous media

    Science.gov (United States)

    Seiphoori, A.; Ortiz, C. P.; Jerolmack, D. J.

    2017-12-01

    Transport of asbestos through soil by groundwater is typically considered to be negligible. There are indications, however, that under some conditions of pore-water/soil chemistry asbestos may become mobile, implying that buried contaminants could migrate from a disposal site and surface elsewhere. Shape, size and surface charge may influence the physical and chemical interactions of colloids with the soil matrix, and asbestos consists of elongated particles with different size and unique surface charge properties. Although chemical factors such as pH and ionic strength of pore water may affect the transport properties, the presence of dissolved organic carbon (DOC) has been identified to remarkably enhance the mobility of colloids including asbestos. To date, there is no explanation for how the presence of DOC may facilitate the mobilization of asbestos in soil - mainly because the soil medium has been treated as a black box without the possibility of observing particles within the matrix. Here, we investigated the mobility of chrysotile asbestos particles ( 10 um long) in porous media by developing a flow cell with an optically-transparent porous medium composed of granules of a refractive-index matched material. This enabled us to observe and track the particles within the water-saturated porous medium using in situ microscopy. The aqueous suspension of asbestos fibers was passed through this artificial soil, while the physical and chemical interaction of asbestos particles with the medium and their pore-scale distribution were analyzed. We studied the effects of changing solution chemistry (e.g., ionic strength, pH, and DOC content) on transport, attachment and aggregation of chrysotile particles. Experiments revealed a novel mechanism where the DOC-associated nanoparticles attach to chrysotile fibers by an electrostatic attraction, which facilitates their mobilization through the porous medium while modulating aggregation among fibers. Although pH and ionic

  18. A perspective multidisciplinary geological approach for mitigation of effects due to the asbestos hazard

    Science.gov (United States)

    Vignaroli, Gianluca; Rossetti, Federico; Belardi, Girolamo; Billi, Andrea

    2010-05-01

    Asbestos-bearing rock sequences constitute a remarkable natural hazard that poses important threat to human health and may be at the origin of diseases such as asbestosis, mesothelioma and lung cancer). Presently, asbestos is classified as Category 1 carcinogen by world health authorities. Although regulatory agencies in many countries prohibit or restrict the use of asbestos, and discipline the environmental asbestos exposure, the impact of asbestos on human life still constitutes a major problem. Naturally occurring asbestos includes serpentine and amphibole minerals characterised by fibrous morphology and it is a constituent of mineralogical associations typical of mafic and ultramafic rocks within the ophiolitic sequences. Release of fibres can occur both through natural processes (erosion) and through human activities requiring fragmentation of ophiolite rocks (quarrying, tunnelling, railways construction, etc.). As a consequence, vulnerability is increasing in sites where workers and living people are involved by dispersion of fibres during mining and milling of ophiolitic rocks. By analysing in the field different exposures of ophiolitic sequences from the Italian peninsula and after an extensive review of the existing literature, we remark the importance of the geological context (origin, tectonic and deformation history) of ophiolites as a first-order parameter in evaluating the asbestos hazard. Integrated structural, textural, mineralogical and petrological studies significantly improve our understanding of the mechanisms governing the nucleation/growth of fibrous minerals in deformation structures (both ductile and brittle) within the ophiolitic rocks. A primary role is recognised in the structural processes favouring the fibrous mineralization, with correlation existing between the fibrous parameters (such as mineralogical composition, texture, mechanics characteristics) and the particles released in the air (such as shape, size, and amount liberated

  19. Location | Frederick National Laboratory for Cancer Research

    Science.gov (United States)

    The Frederick National Laboratory for Cancer Research campus is located 50 miles northwest of Washington, D.C., and 50 miles west of Baltimore, Maryland, in Frederick, Maryland. Satellite locations include leased and government facilities extending s

  20. Understanding of the characteristics of the local newspapers providing media coverage on the matters of nuclear energy in the regions where nuclear facilities are located. Based on analysis of the media reports and interviews with journalists

    International Nuclear Information System (INIS)

    Tsuchida, Tatsuro; Kimura, Hiroshi

    2011-01-01

    Taking into consideration the influence of the media coverage, this research aims to analyze the characteristics of the local newspapers that cover diverse events relevant to nuclear energy in regional areas where nuclear facilities are located (hereinafter called the 'region'). According to the previous surveys, local residents in the region are more interested in the nuclear energy matters than those who live in urban areas. Plus, the local newspapers turn out to report more events of nuclear energy from a variety of angles. Through interviews with executives and journalists of the local newspaper companies in the regions, it is revealed that the local newspapers tend not to report news sensationally, but they would rather take a supportive stance toward the development in their regions. The interviewees hope that various activities of the nuclear industry will promote education, employment and cooperation among government, industry and academia. They also desire that the industry's activities will help to increase benefits in their regions. It appears that the interviewees' awareness reflects articles of the local newspapers. As a result of the surveys conducted for this research, it is considered that the journalists expect that their region will make particularly qualitative progress in the future. (author)

  1. Compensation for environmental asbestos-related diseases in South Africa: a neglected issue

    Directory of Open Access Journals (Sweden)

    Ntombizodwa Ndlovu

    2013-01-01

    Full Text Available Background: Environmentally acquired asbestos-related diseases (ARDs are of concern globally. In South Africa, there is widespread contamination of the environment due to historical asbestos mining operations that were poorly regulated. Although the law makes provision for the compensation of occupationally acquired ARDs, compensation for environmentally acquired ARDs is only available through the Asbestos Relief Trust (ART and Kgalagadi Relief Trust, both of which are administered by the ART. This study assessed ARDs and compensation outcomes of environmental claims submitted to the Trusts. Methods: The personal details, medical diagnoses, and exposure information of all environmental claims considered by the Trusts from their inception in 2003 to April 2010 were used to calculate the numbers and proportions of ARDs and compensation awards. Results: There were 146 environmental claimants of whom 35 (23.9% had fibrotic pleural disease, 1 (0.7% had lung cancer, and 77 (52.7% had malignant mesothelioma. 53 (36.3% claimants were compensated: 20 with fibrotic pleural disease and 33 with mesothelioma. Of the 93 (63.7% claimants who were not compensated, 33 had no ARDs, 18 had fibrotic pleural disease, 1 had lung cancer, and 44 had mesothelioma. In addition to having ARDs, those that were compensated had qualifying domestic (33; 62.2% or neighbourhood (20; 37.8% exposures to asbestos. Most of the claimants who were not compensated had ARDs but their exposures did not meet the Trusts’ exposure criteria. Conclusions: This study demonstrates the environmental impact of asbestos mining on the burden of ARDs. Mesothelioma was the most common disease diagnosed, but most cases were not compensated. This highlights that there is little redress for individuals with environmentally acquired ARDs in South Africa. To stop this ARD epidemic, there is a need for the rehabilitation of abandoned asbestos mines and the environment. These issues may not be unique to

  2. Colorectal cancer and non-malignant respiratory disease in asbestos cement and cement workers

    International Nuclear Information System (INIS)

    Jacobsson, K.

    1993-09-01

    Radiologically visible parenchymal changes (small opacities >= 1/0;ILO 1980 classification) were present in 20% of a sample of workers (N=174), employed for 20 years (median) in an asbestos cement plant. Exposure-response relationships were found, after controlling for age and smoking habits. In a sample of asbestos cement workers with symptoms and signs suggestive of pulmonary disease (N=33), increased lung density measured by x-ray computed tomography, and reduced static lung volumes and lung compliance was found. In a cohort of asbestos cement workers (N=1.929) with an estimated median exposure of 1.2 fibres/ml, the mortality from non-malignant respiratory disease was increased in comparison to a regional reference cohort (N=1.233). A two-to three-fold increase of non-malignant respiratory mortality was noted among workers employed for more than a decade in the asbestos cement plant, compared to cement workers (N=1.526), who in their turn did not experience and increased risk compared to the general population. In the cohorts of asbestos cement and cement workers, there was a tow-to three-fold increased incidence of cancer in the right part of the colon, compared to the general population as well as to external reference cohorts of other industrial workers (N=3.965) and fishermen (N=8.092). A causal relation with the exposure to mineral dust and fibres was supported by the findings of higher risk estimated in subgroups with high cumulated asbestos doses or longer duration of cement work. The incidence of cancer in the left part of the colon was not increased. Morbidity data, but not mortality data, disclosed the subsite-specific risk pattern. Both asbestos cement workers and cement workers has an increased incidence of rectal cancer, compared with the general population, and with the fishermen. The risk was, however, of the same magnitude among the other industrial workers. 181 refs

  3. Estimating asbestos abatement projects: Excellence or 'You said I missed what'?

    International Nuclear Information System (INIS)

    Frawley, R.F.

    1992-01-01

    Between 1900 and 1980, 30 million tons of asbestos were put in place. Because of the known health hazards and increasing federal, state, and local regulations, building owners are now facing the problem of asbestos abatement. There are 4 basic approaches to dealing with asbestos: (1) removal, (2) enclosure, (3) encapsulation, (4) deferred action in conjunction with a well defined operations and maintenance program. Once the full extent of the problem is determined, the decision can be made on which action or combination of actions to take and begin estimating the cost of the asbestos abatement project. There are no high-tech methods of asbestos removal. It is hot, wet, labor intensive work, the ways of removal are archaic. Removal means man power and man hours, labor is a big ticket item, and is an important factor in cost estimating. Become very familiar with the scope of the project and be sure to fully understand the depth of the asbestos problem. The products, supplies, tools, and in some cases, the machines are all disposable items. If one overlooks something or underestimates the time involved for removal, not only will one be way off on material, the labor costs will soar. Be very observant on walk throughs, notice everything. Be sure to get clear, accurate test results on material to be removed. Once all this is done, one can make a good take off with confidence. Finally, when in doubt always remember the 11th commandment of asbestos abatement cost-estimating 'If thou can't figure it out hor-ellipsis thou best figure it in.'

  4. Compensation for environmental asbestos-related diseases in South Africa: a neglected issue.

    Science.gov (United States)

    Ndlovu, Ntombizodwa; Naude, Jim teWater; Murray, Jill

    2013-01-24

    Environmentally acquired asbestos-related diseases (ARDs) are of concern globally. In South Africa, there is widespread contamination of the environment due to historical asbestos mining operations that were poorly regulated. Although the law makes provision for the compensation of occupationally acquired ARDs, compensation for environmentally acquired ARDs is only available through the Asbestos Relief Trust (ART) and Kgalagadi Relief Trust, both of which are administered by the ART. This study assessed ARDs and compensation outcomes of environmental claims submitted to the Trusts. The personal details, medical diagnoses, and exposure information of all environmental claims considered by the Trusts from their inception in 2003 to April 2010 were used to calculate the numbers and proportions of ARDs and compensation awards. There were 146 environmental claimants of whom 35 (23.9%) had fibrotic pleural disease, 1 (0.7%) had lung cancer, and 77 (52.7%) had malignant mesothelioma. 53 (36.3%) claimants were compensated: 20 with fibrotic pleural disease and 33 with mesothelioma. Of the 93 (63.7%) claimants who were not compensated, 33 had no ARDs, 18 had fibrotic pleural disease, 1 had lung cancer, and 44 had mesothelioma. In addition to having ARDs, those that were compensated had qualifying domestic (33; 62.2%) or neighbourhood (20; 37.8%) exposures to asbestos. Most of the claimants who were not compensated had ARDs but their exposures did not meet the Trusts' exposure criteria. This study demonstrates the environmental impact of asbestos mining on the burden of ARDs. Mesothelioma was the most common disease diagnosed, but most cases were not compensated. This highlights that there is little redress for individuals with environmentally acquired ARDs in South Africa. To stop this ARD epidemic, there is a need for the rehabilitation of abandoned asbestos mines and the environment. These issues may not be unique to South Africa as many countries continue to mine and use

  5. Emission of asbestos fibres from natural-draught cooling towers. Pt. 1 and 2

    International Nuclear Information System (INIS)

    Ernst, G.; Althaus, E.; Karotke, E.; Grimm, K.; Heumann, H.G.; Rueckert, G.

    1985-01-01

    Sampling for the studies reported has been done in a relatively new nuclear power plant with natural-draught, wet cooling tower, and in an older, brown-coal fired power plant with the same type of cooling towers, both towers equipped with internal structures made of asbestos cement. Samples have been taken from the plumes, air in the environment, cooling water receiving tank, make-up water. The samples have been primarily examined for their content of asbestos fibres. The results show that relatively few asbestos is found in the environmental air and in the cooling water receiving tank. Putting it continuously, it can be said that the cooling water entrains only little amounts of the asbestos of the internal structures. The plume samples indicate emission of some thousand asbestos fibres per m 3 , or less than 1 ng. Taking into account one sample exhibiting an extremely high amount of asbestos, the average emission of asbestos fibres with the plumes is 10 6 fibres per m 3 , or 100 ng/m 3 of plume. The maximum air pollution thus calculated in accordance with TA Luft (Clean Air Technical Directive), for the less favourable weather conditions at a hight of 2 m above ground, is 10 fibres per one m 3 of air; including the extreme data of the single sample mentioned above, the result is some thousand fibres per m 3 . The data are far below the TRK data (Technical guiding data for maximum concentration at the place of work), which state a maximum of 10 6 fibres per m 3 . (orig.) [de

  6. Measurement of asbestos bodies in lung tissue of autopsy cases diagnosed with primary lung cancer

    International Nuclear Information System (INIS)

    Idei, Yuka; Kamada, Satoe; Matsumoto, Shoji; Ohnishi, Kazuo; Kitazawa, Riko; Kitazawa, Sohei

    2007-01-01

    To investigate the relation between asbestos-related lung cancer and the concentration of asbestos bodies in lung tissue, we analyzed the concentration in 24 autopsy cases diagnosed with primary lung cancer, with regard to the gender, age, histological type of lung cancer and occupation of each case. The asbestos bodies were measured according to Kohyama's method. Positive cases (more than 5,000 bodies per 1 g of dry lung tissue) were further analyzed for asbestosis and pleural plaques by chest X-ray and chest CT. Two cases exhibited more than 5,000 bodies, five cases between 1,000 and 5,000, and seventeen cases less than 1,000. The occupation of the two positive cases was not informative: one demonstrated neither asbestosis nor pleural plaques, and the other showed only pleural plaques. Although the number of cases of asbestos-related lung cancer is minimal among all lung cancer cases, the number of the former may exceed that of mesothelioma patients. Not only physicians but also radiologists, surgeons and pathologists need to collaborate in the diagnosis of asbestos-related lung cancer. (author)

  7. Mechanisms of asbestos-induced squamous metaplasia in tracheobronchial epithelial cells

    International Nuclear Information System (INIS)

    Cameron, G.; Woodworth, C.D.; Edmondson, S.; Mossman, B.T.

    1989-01-01

    Within 1 to 4 weeks after exposure to asbestos, differentiated rodent and human tracheobronchial epithelial cells in organ culture undergo squamous metaplasia, a putative preneoplastic lesion characterized by conversion of mucociliary cell types to keratinizing cells. The exogenous addition of retinal acetate (RA) to culture medium of hamster tracheal organ cultures reverses preestablished, asbestos-induced squamous metaplasia, although data suggest that the effectiveness of RA decreases as the length of time between exposure to asbestos and initial application of RA increases. Difluoromethylornithine (DFMO), an irreversible inhibitor of ornithine decarboxylase (ODC), inhibits squamous metaplasia caused by asbestos or vitamin A deficiency, whereas addition of methylglyoxal bis(guanyl-hydrazone) (MGBG), a structural analog of spermidine and inhibitor of S-adenosylmethionine decarboxylase, causes an enhancement of metaplasia under both circumstances. Basal cell hyperplasia and increased incorporation of 3 H-thymidine by tracheal epithelial cells also are seen after addition of the polyamines, putrescine or spermidine, to tracheal organ cultures, an observation supporting the importance of polyamines in the development of this lesion. The use of retinoids and inhibitors of ODC could be promising as preventive and/or therapeutic approaches for individuals at high risk for development of asbestos-associated diseases

  8. Pleural mesothelioma: Case-report of uncommon occupational asbestos exposure in a small furniture industry.

    Science.gov (United States)

    Oddone, Enrico; Imbriani, Marcello

    2016-01-01

    The relationship between asbestos exposure and malignant mesothelioma is no longer disputed, although it is not always easy to trace past occupational exposure. This report describes a case of uncommon asbestos exposure of a small furniture industry worker, who subsequently died of pleural malignant mesothelioma, to stress the crucial importance of a full reconstruction of the occupational history, both for legal and compensation purposes. Sarcomatoid pleural mesothelioma was diagnosed in a 70-year-old man, who was previously employed as a carpenter in a small furniture industry. He worked for about 6 years in the small factory, was exposed to asbestos during the assembly of the furniture inspired by classical architecture, in which asbestos cement tubes were used to reproduce classical columns. During this production process no specific work safety measures were applied, nor masks or local aspirators. No extra-professional exposure to asbestos was identified. This mesothelioma case was investigated by the Public Prosecutor's assignment that commissioned expert evidence on the legal accountability for the disease. Despite its uncommon expositive circumstance, the length of latency (about 30 years), the duration of exposure, the clinical and histochemical features are all consistent with literature evidence, accounting for the occupational origin of this malignancy. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  9. Trades of dangers: a study of asbestos industry transfer cases in Asia.

    Science.gov (United States)

    Choi, Yeyong; Lim, Sinye; Paek, Domyung

    2013-03-01

    In a study of asbestos industry transfers in Asia, we examined the transfer of health and safety measures at the time of industry transfer and resulting health outcomes thereafter. Field surveys were conducted in Japan, Germany, Indonesia, and South Korea over a 5 year period beginning in 2007. The surveys involved interviews and field assessments of health and safety conditions. Even when there were transfers of entire engineering plant processes, we observed that the health and safety measures that should have accompanied the transfer, including technical capacities of risk assessment and management, regulatory protection, and cultural practices, were not actually transferred. According to work environment assessment records, there were differences in airborne asbestos levels of approximately 5-6 fibers/cc between the exporting and importing sides of the transfer. This amounted to a 10 years of time delay in comparable health and safety conditions. These differences resulted in repeated adverse health consequences at each factory operation site. Dangerous transfers of asbestos industry technology have occurred repeatedly over the years with the result that Asia has become the largest consumer of asbestos in the world. No effective internationally accepted safety measures have been introduced in the region. The study results support the need for both improved public awareness and international cooperation, such as sharing of substitute material technologies by the exporting countries, and provide the rationale for the creation of an Asian fund for asbestos victims. Copyright © 2012 Wiley Periodicals, Inc.

  10. [Asbestos in pre-industrial times: from natural wonder to subject of scientific investigation].

    Science.gov (United States)

    Carnevale, F

    2012-01-01

    The author proposes a reading of "Concerning incombustible flax or asbestos stone" which was published in 1696 by Giovanni Giustino Ciampini, who was a historian, a man of the church and scientist in Rome. The text, which was originally written in Latin, is an excellent and early description of the need felt by the majority of scientists in Europe at that time for a change in method: that is, to use scientific experiments to explain and control the natural phenomena observed and even perhaps mythologized right from antiquity. In the case of asbestos this was necessary to check the veracity and consistency of a series of recommendations handed down by the earliest authors but also to revive and reinvent the techniques that had largely been lost so as to be able to utilize and develop a substance that it was thought could be of great benefit to society. In the presentation of Ciampini's text an attempt is made to recall and contextualize the earliest knowledge on asbestos and follow its evolution over a long historical period, up to the first half of the nineteenth century. It can thus be seen how asbestos, once considered "a wonder of nature", became a raw material widely used in industrial applications. The most significant steps in this phase of transformation were taken thanks to Italian entrepreneurs and technicians and to the presence of asbestos in the Alpine valleys of Italy.

  11. Incidence of cancer and mortality among employees in the asbestos cement industry in Denmark

    DEFF Research Database (Denmark)

    Raffn, E; Lynge, E; Juel, K

    1989-01-01

    In a cohort study of the incidence of cancer and mortality among 7996 men and 584 women employed in the Danish asbestos cement industry between 1928 and 1984 over 99% were traced. Chrysotile asbestos was the only fibre type used until 1946, when amosite and (in 1952) crocidolite were also...... introduced. Chrysotile constituted 89%, amosite 10%, and crocidolite 1% of the asbestos used. During the first 25 years of manufacture the exposure levels were high, especially in areas where the asbestos was handled dry. Measurements from 1948 indicate that the fibre levels may have ranged from 100 to 1600...... for men for non-malignant pulmonary diseases (O/E 1.63; 95% CI 1.33-1.98). Among the group of asbestos cement workers with first employment 1928-40 an excess risk of laryngeal cancer was found (O/E 5.50;95% CI 1.77-12.82). A total of 12 cases of pleural and one of peritoneal mesotheliomas was observed...

  12. Binding of radiolabeled asbestos fibers to guinea pig (gp) alveolar macrophages (AM)

    International Nuclear Information System (INIS)

    Giannotti, M.A.; Tewson, T.J.; Francsechini, M.P.; Scheule, R.K.; Holian, A.

    1990-01-01

    The mechanism by which fibrogenic particulates cause pulmonary fibrosis in humans is not understood, but is likely to involve the AM. Using two fibrogenic particulates, namely, chrysotile (CHR) and crocidolite (CRO) asbestos and gpAM as components of an in vitro model system, the authors have shown that CHR stimulates the gpAM to release superoxide anion, but CRO does not. To examine whether this difference in stimulatory abilities is a result of differences in cell-asbestos binding they have developed an efficient procedure that radiolabels asbestos fibers while retaining their bioactivity. The fibers are labeled with 68 Ge. The 68 Ge decays into 68 Ga, which then can be detected by its characteristic position emission. Both CHR and CRO asbestos were radiolabled successfully. Mild reaction conditions and short reaction times were found under which >90% of the added 68 Ge and 68 Ga bound to the fibers. The radiolabel was retained even after washing the fibers extensively with physiologic buffers. A density gradient procedure was developed to quantitate the binding of asbestos to gpAM in suspension. The binding of both fibers increased with time over one hr. Thus, these results indicate that although both CHR and CRO interact with the gpAM, only CHR interacts productively to stimulate superoxide anion release

  13. A novel decomposition technique of friable asbestos by CHClF2-decomposed acidic gas

    International Nuclear Information System (INIS)

    Yanagisawa, Kazumichi; Kozawa, Takahiro; Onda, Ayumu; Kanazawa, Masazumi; Shinohara, Junichi; Takanami, Tetsuro; Shiraishi, Masatsugu

    2009-01-01

    Asbestos was widely used in numerous materials and building products due to their desirable properties. It is, however, well known that asbestos inhalation causes health damage and its inexpensive decomposition technique is necessary to be developed for pollution prevention. We report here an innovative decomposition technique of friable asbestos by acidic gas (HF and HCl) generated from the decomposition of CHClF 2 by the reaction with superheated steam at 800 deg. C. Chrysotile-asbestos fibers were completely decomposed to sellaite and magnesium silicofluoride hexahydrate by the reaction with CHClF 2 -decomposed acidic gas at 150 deg. C for 30 min. At high temperatures beyond 400 deg. C, sellaite and hematite were detected in the decomposed product. In addition, crocidolite containing wastes and amosite containing wastes were decomposed at 500 deg. C and 600 deg. C for 30 min, respectively, by CHClF 2 -decomposed acidic gas. The observation of the reaction products by phase-contrast microscopy (PCM) and scanning electron microscopy (SEM) confirmed that the resulting products did not contain any asbestos

  14. Location of slaughterhouses under economies of scale

    NARCIS (Netherlands)

    van den Broek, J.J.J.; Schütz, P.; Stougie, L.; Tomasgard, A.

    2006-01-01

    The facility location problem described in this paper comes from an industrial application in the slaughterhouse industry of Norway. Investigations show that the slaughterhouse industry experiences economies of scale in the production facilities. We examine a location-allocation problem focusing on

  15. [Malignant mesothelioma in Emilia-Romagna: incidence and asbestos exposure].

    Science.gov (United States)

    Mangone, Lucia; Romanelli, Antonio; Campari, Cinzia; Candela, Silvia

    2002-01-01

    This paper describes the activity, the sources of informations, methods and results of the "Emilia-Romagna Mesothelioma Registry" (ReM). The Registry started in 1996 and collects all cases of Malignant Mesothelioma (MM) occurring in Emilia-Romagna. 323 new cases (225 males and 98 females) have been detected during the period 1996-2001. Most cases (n = 286) concerned pleura. Other observed localizations were: peritoneum (n = 30), tunica vaginalis testis (n = 4) and pericardium (n = 3). Most of the cases were reported by the Institutes of Pathology and Occupational Health and by the Safety Services (respectively the 62% and the 18%). 87% of all the cases were histologically, 8% TC, 4% radiologically and only 1% clinically confirmed. The regional incidence rate (for 10(5) person-years, age standardized on the 1991 Italian population), has been estimated to be 1.98 in males and 0.88 in females. The highest rates were registered in Piacenza and Reggio Emilia province among men and Reggio Emilia and Ravenna province among women. 72% of cases have been classified as exposed to asbestos (64% occupationally and 8% as domestic/environmentally exposed).

  16. Immunomodulatory effects in workers exposed to naturally occurring asbestos fibers.

    Science.gov (United States)

    Ledda, Caterina; Costa, Chiara; Matera, Serena; Puglisi, Beatrice; Costanzo, Valentina; Bracci, Massimo; Fenga, Concettina; Rapisarda, Venerando; Loreto, Carla

    2017-05-01

    Natural asbestiform fibers are defined 'naturally occurring asbestos' (NOA) and refer to the mineral as a natural component of soils or rocks. The release of NOA fibers into the air from rocks or soils by routine human activities or natural weathering processes represents a risk for human beings. Fluoro-edenite (FE) is a NOA fiber detected in the benmoreitic lava in the area of Biancavilla, South-west slope of Mt. Etna. The aim of the present study was to investigate FE immunotoxicity pathways in a group of 38 occupationally exposed construction workers, in order to find any biological markers of its effect. Subjects underwent respiratory function tests and HRCT total chest scanning. Serum IL-1β, IL-6, IL-8 and TNF-α were measured. The presence of PPs was significantly greater in subjects exposed than in the control (25 vs. 2). In subjects exposed to FE, IL-1β and TNF-α values were significantly higher than the controls. The previously observed increase of IL-1β and IL-18 showed a probable involvement of the proteic complex defined inflammosome by FE fibers.

  17. WTO confidential: the case of asbestos. World Trade Organization.

    Science.gov (United States)

    Castleman, Barry

    2002-01-01

    The World Trade Organization (WTO), created in 1995, adjudicates "trade disputes" between member nations in cases with great human rights, cultural, environmental, and public health significance. Throughout the process of dispute resolution and even after a case is concluded, very little of what happens is made accessible to the public. However, it is one thing to criticize the WTO for its lack of transparency from outside the process, and another to critically examine what was withheld from disclosure and what dangers that presents. This is the inside story from a scientific adviser to one of the parties in a WTO case, analyzing what happened from a public health point of view. This analysis concludes that the public health justification of banning asbestos was accepted in the end by the economists at the WTO, despite the WTO's bias in favoring the party (Canada) making the free trade challenge (to public health legislation, in this case) in numerous stages of the process, despite the WTO's utter lack of expertise in science, medicine, engineering, and public health, and despite important erroneous statements made to the WTO under the cover of confidentiality. Despite its result, this case illustrates that the WTO's threat to national sovereignty could never withstand the light of day, that the people of the world would reject this dangerous free trade fundamentalism if the limitations and dangers of the process were open for all to see.

  18. Bacteriological challenges to asbestos cement water distribution pipelines.

    Science.gov (United States)

    Wang, Dunling; Cullimore, D Roy

    2010-01-01

    Asbestos cement (AC) pipes were commonly installed in the drinking water distribution systems from the mid 1920s to the late 1980s. In recent years, an increase in the number of water main breaks has occurred in the AC portions of some pipe networks, which can be partially attributed to the corrosion of the aged pipes. This study evaluated the potential role that microorganisms may have played in the degeneration and failure of AC pipes. In this study, a fresh AC pipe section was collected from the distribution network of the City of Regina, Canada and examined for microbiological activities and growth on inside surfaces of pipe sample. Black slime bacterial growths were found to be attached to inner pipe surfaces and a distinctively fibrous internal coating (patina) with iron oxides was formed over the time. The microbial populations inside the patina and the black slime were tested with BART testers. Heterotrophic aerobic bacteria (HAB) and slime forming bacteria (SLYM) dominated in both the black growths and inside the patina. Iron related bacteria, denitrification bacteria and sulfate reducing bacteria were also commonly present. Microbial challenge assays were conducted by submerging the cut segments of the AC pipe into selected bacterial cultures for a period of 10 days under both aerobic and anaerobic environments. Weight changes were determined and the surface morphology was examined for each of the assayed pipe segments. Results indicated that acid producing bacteria, SLYM and HAB could facilitate the pipe weight loss under anaerobicenvironments.

  19. Asbestos-Containing Materials in Schools; Final Rule and Notice. Part III: Environmental Protection Agency. 40 CFR Part 763.

    Science.gov (United States)

    Federal Register, 1987

    1987-01-01

    The Environmental Protection Agency (EPA) has issued a final rule under the Toxic Substance Control Act (TSCA) to require all local education agencies (LEAs) to identify asbestos-containing materials in their school buildings and take appropriate action to control release of asbestos fibers. The LEAs are required to describe their activities in…

  20. Mapping Asbestos-Cement Roofing with Hyperspectral Remote Sensing over a Large Mountain Region of the Italian Western Alps

    Directory of Open Access Journals (Sweden)

    Federico Frassy

    2014-08-01

    Full Text Available The World Health Organization estimates that 100 thousand people in the world die every year from asbestos-related cancers and more than 300 thousand European citizens are expected to die from asbestos-related mesothelioma by 2030. Both the European and the Italian legislations have banned the manufacture, importation, processing and distribution in commerce of asbestos-containing products and have recommended action plans for the safe removal of asbestos from public and private buildings. This paper describes the quantitative mapping of asbestos-cement covers over a large mountainous region of Italian Western Alps using the Multispectral Infrared and Visible Imaging Spectrometer sensor. A very large data set made up of 61 airborne transect strips covering 3263 km2 were processed to support the identification of buildings with asbestos-cement roofing, promoted by the Valle d’Aosta Autonomous Region with the support of the Regional Environmental Protection Agency. Results showed an overall mapping accuracy of 80%, in terms of asbestos-cement surface detected. The influence of topography on the classification’s accuracy suggested that even in high relief landscapes, the spatial resolution of data is the major source of errors and the smaller asbestos-cement covers were not detected or misclassified.

  1. The Tale of Asbestos in Sweden 1972–1986—The Pathway to a Near-Total Ban

    Directory of Open Access Journals (Sweden)

    Peter Westerholm

    2017-11-01

    Full Text Available This paper provides a narrative of the national intervention strategy in Sweden aimed to restrict the industrial use of asbestos. For many years, asbestos was imported for widespread industrial use, resulting in large amounts throughout Swedish society. In 1972, the whistle was blown in a Communist Party parliamentary motion describing asbestos as a health hazard and requesting action to prohibit its use. Although the motion was rejected, it initiated the extensive charting of asbestos sources on a tripartite basis, involving government agencies, and employer and trade-union organizations. Restrictive asbestos management practices were enforced from July 1982. The year 1985 saw the Government Asbestos Commission review, covering use-determining factors, international regulations, and assessments of cancer risks. The relative risks of chrysotile and amphibole were considered internationally (by the IARC, since chrysotile (a Canadian export was regarded as unharmful in Canada at that time. Prohibiting asbestos use resulted in its virtual disappearance as an import to Sweden from the early 1980s. However, asbestos has undergone a transition from an occupational to a public-health hazard (although some work-related hazards, such as handling and disposal, remain. The transition reflects the public’s exposure to existing stocks, in homes, workplaces, etc. Mesothelioma incidence has come to be regarded as an indicator of prevention effectiveness.

  2. The Tale of Asbestos in Sweden 1972-1986-The Pathway to a Near-Total Ban.

    Science.gov (United States)

    Westerholm, Peter; Remaéus, Bertil; Svartengren, Magnus

    2017-11-22

    This paper provides a narrative of the national intervention strategy in Sweden aimed to restrict the industrial use of asbestos. For many years, asbestos was imported for widespread industrial use, resulting in large amounts throughout Swedish society. In 1972, the whistle was blown in a Communist Party parliamentary motion describing asbestos as a health hazard and requesting action to prohibit its use. Although the motion was rejected, it initiated the extensive charting of asbestos sources on a tripartite basis, involving government agencies, and employer and trade-union organizations. Restrictive asbestos management practices were enforced from July 1982. The year 1985 saw the Government Asbestos Commission review, covering use-determining factors, international regulations, and assessments of cancer risks. The relative risks of chrysotile and amphibole were considered internationally (by the IARC), since chrysotile (a Canadian export) was regarded as unharmful in Canada at that time. Prohibiting asbestos use resulted in its virtual disappearance as an import to Sweden from the early 1980s. However, asbestos has undergone a transition from an occupational to a public-health hazard (although some work-related hazards, such as handling and disposal, remain). The transition reflects the public's exposure to existing stocks, in homes, workplaces, etc. Mesothelioma incidence has come to be regarded as an indicator of prevention effectiveness.

  3. Retrospective assessment of occupational asbestos exposure among 220 patients with respiratory cancer hospitalized at Vilnius University Institute of Oncology

    International Nuclear Information System (INIS)

    Petrauskaite Everatt, R.; Jankauskas, R.; Tossavainen, A.; Cicenas, S.; Smolianskiene, G.

    2005-01-01

    No cases of lung cancer or mesothelioma have ever been diagnosed or compensated as asbestos-related in Lithuania. This paper attempts to estimate the proportion of those occupationally exposed to asbestos among respiratory cancer patients. Occupational exposure to asbestos was assessed retrospectively for 218 lung cancer and 2 mesothelioma patients admitted to Institute of Oncology, Vilnius University. The evaluation was based on personal interview data using an internationally established questionnaire. Cumulative exposure to asbestos at work was evaluated in fibre-years. A cumulative asbestos exposure of ≥25 fibre-years was found for 7 patients (3.2%), in further 135 (61.2%) a cumulative exposure from 0.01 to 24.99 fibre-years was assessed. The most common occupations among heavily (≥25 fibre-years) exposed patients were smith, welder or insulator in foundries, construction, shipyard as well as asbestos cement and glass industry. Preliminary findings indicate that a fraction (3.2%) of the respiratory cancer cases could be attributed to occupational exposure to asbestos. Since 1560 or more cases of lung cancer are registered every year in Lithuania, about 50 cases per year could be predicted to be asbestos-related. (author)

  4. 78 FR 2333 - Approval of the Clean Air Act, Section 112(l), Authority for Hazardous Air Pollutants: Asbestos...

    Science.gov (United States)

    2013-01-11

    ...] Approval of the Clean Air Act, Section 112(l), Authority for Hazardous Air Pollutants: Asbestos Management... protection, Administrative practice and procedure, Air pollution control, Hazardous substances, Incorporation...-Sw 2100: Management and Control of Asbestos Disposal Sites Not Operated after July 9, 1981,'' and the...

  5. Determining the frequency of asbestos use in automotive brakes from a fleet of on-road California vehicles.

    Science.gov (United States)

    De Vita, Joseph; Wall, Stephen; Wagner, Jeff; Wang, Zhong-Min; Rao, Leela E

    2012-02-07

    Asbestos is a known human carcinogen, and recent regulation in California limits asbestiform fibers in brakes to trace levels beginning in 2014, although there is no corresponding federal requirement. In order to gauge the current prevalence of asbestos use in automotive brake applications, the California Air Resources Board tested brake linings from 137 light- and medium-duty vehicles and 54 heavy-duty vehicles. Only about 3% of the light- and medium-duty vehicle brake linings contained chrysotile asbestos. All of those brake linings were drum-type shoes, which are generally being phased out. No asbestos was found in low mileage vehicles presumed to have their original stock linings from the vehicle manufacturer. Additionally, no asbestos was found in the heavy-duty vehicle brake shoe linings sampled. Given the small percentage of vehicle brake linings with asbestos observed, it appears that the prior federal ban that was subsequently overturned, in combination with a threat of litigation, has reduced asbestos use in brake linings. However, our study was limited in scope and without a national ban, the current and future prevalence of asbestos in brakes is uncertain, suggesting the need for continued monitoring of materials released as toxic air contaminants in normal braking operations.

  6. 40 CFR 61.151 - Standard for inactive waste disposal sites for asbestos mills and manufacturing and fabricating...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standard for inactive waste disposal sites for asbestos mills and manufacturing and fabricating operations. 61.151 Section 61.151 Protection... inactive waste disposal sites for asbestos mills and manufacturing and fabricating operations. Each owner...

  7. Mesothelioma incidence and community asbestos exposure; Incidence du mesotheliome et exposition environnementale a l'amiante

    Energy Technology Data Exchange (ETDEWEB)

    Berry, M.

    1998-03-01

    The objective of this study is to examine the importance of environmental exposure, non professional, to asbestos in the supervening of mesothelioma among the inhabitants of Manville( Somerset county, New Jersey, United States) where is the most important factory making products with asbestos of the North America. (N.C.)

  8. Malignant mesothelioma: attributable risk of asbestos exposure; Mesotheliome malin: risque attribuable a une exposition a l'amiante

    Energy Technology Data Exchange (ETDEWEB)

    Spirtas, R.

    1998-03-01

    The objective of this study is to evaluate the risk due to asbestos in the supervening of mesothelioma from interviews by phone of members of family with cases and witnesses, on the professional activities or others causes that could expose these persons to asbestos during their whole life. (N.C.)

  9. Towards elimination of asbestos-related diseases: a theoretical basis for international cooperation.

    Science.gov (United States)

    Takahashi, Ken; Kang, Seong-Kyu

    2010-12-01

    We develop a theoretical framework for international cooperation that can be used for the elimination of asbestos-related diseases (ARDs). The framework is based on the similarities in the temporal patterns of asbestos use and occurrence of ARDs in diverse countries. The status of each nation can be characterized by observing asbestos use and ARD frequency therein using a time window. Countries that supply technology for prevention of ARDs can be classified as donors and countries that receive these technologies as recipients. We suggest identification of three levels of core preventative technologies. Development of a common platform to gather and manage core preventative technologies will combine the strengths of donor countries and the needs of recipient countries.

  10. Lymphoproliferative disorder in pleural effusion in a subject with past asbestos exposure

    Directory of Open Access Journals (Sweden)

    Naofumi Hara

    2015-01-01

    Full Text Available Primary effusion lymphoma (PEL is a subtype of non-Hodgkin lymphoma that presents as serous effusions without detectable masses or organomegaly. Here we report a case of PEL-like lymphoma in a patient with past asbestos exposure. A 65-year-old man was referred to our hospital due to dyspnea upon exertion. He had been exposed to asbestos for three years in the construction industry. Chest X-ray and CT images demonstrated left pleural effusion. Cytological analysis of the pleural effusion revealed large atypical lymphocytes with distinct nuclear bodies and high nucleus-to-cytoplasm ratio. Immunohistochemical analyses showed that the cells were CD20+, CD3−, CD5−, and CD10−. These findings led to a diagnosis of diffuse large B-cell lymphoma. PEL or PEL-like lymphoma should be considered a potential cause of pleural effusion in subjects with past asbestos exposure.

  11. Development of a Job-Exposure Matrix (AsbJEM) to Estimate Occupational Exposure to Asbestos in Australia.

    Science.gov (United States)

    van Oyen, Svein C; Peters, Susan; Alfonso, Helman; Fritschi, Lin; de Klerk, Nicholas H; Reid, Alison; Franklin, Peter; Gordon, Len; Benke, Geza; Musk, Arthur W

    2015-07-01

    Occupational exposure data on asbestos are limited and poorly integrated in Australia so that estimates of disease risk and attribution of disease causation are usually calculated from data that are not specific for local conditions. To develop a job-exposure matrix (AsbJEM) to estimate occupational asbestos exposure levels in Australia, making optimal use of the available exposure data. A dossier of all available exposure data in Australia and information on industry practices and controls was provided to an expert panel consisting of three local industrial hygienists with thorough knowledge of local and international work practices. The expert panel estimated asbestos exposures for combinations of occupation, industry, and time period. Intensity and frequency grades were estimated to enable the calculation of annual exposure levels for each occupation-industry combination for each time period. Two indicators of asbestos exposure intensity (mode and peak) were used to account for different patterns of exposure between occupations. Additionally, the probable type of asbestos fibre was determined for each situation. Asbestos exposures were estimated for 537 combinations of 224 occupations and 60 industries for four time periods (1943-1966; 1967-1986; 1987-2003; ≥2004). Workers in the asbestos manufacturing, shipyard, and insulation industries were estimated to have had the highest average exposures. Up until 1986, 46 occupation-industry combinations were estimated to have had exposures exceeding the current Australian exposure standard of 0.1 f ml(-1). Over 90% of exposed occupations were considered to have had exposure to a mixture of asbestos varieties including crocidolite. The AsbJEM provides empirically based quantified estimates of asbestos exposure levels for Australian jobs since 1943. This exposure assessment application will contribute to improved understanding and prediction of asbestos-related diseases and attribution of disease causation. © The

  12. EPA Facility Registry Service (FRS): Facility Interests Dataset - Intranet

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are available in...

  13. EPA Facility Registry Service (FRS): Facility Interests Dataset - Intranet Download

    Data.gov (United States)

    U.S. Environmental Protection Agency — This downloadable data package consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are...

  14. EPA Facility Registry Service (FRS): Facility Interests Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are available in...

  15. EPA Facility Registry Service (FRS): Facility Interests Dataset Download

    Data.gov (United States)

    U.S. Environmental Protection Agency — This downloadable data package consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are...

  16. EPA Facility Registry Service (FRS): Facility Interests Dataset - Intranet Download

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are available in...

  17. Residual fibre lung burden among patients with pleural mesothelioma who have been occupationally exposed to asbestos.

    Science.gov (United States)

    Merler, Enzo; Somigliana, Anna; Girardi, Paolo; Barbieri, Pietro Gino

    2017-03-01

    To evaluate the lungs asbestos fibres concentration in participants with malignant pleural mesothelioma (MPM) who have been occupationally exposed. The lung samples were obtained from pleuropneumonectomies or autopsies of 271 male MPMs. The lung samples were examined through scanning electron microscopy. Retrospective assessment was used to assess for asbestos exposure. This study includes 248 MPMs with an occupational exposure defined as either 'definite' or 'probable' or 'possible'. The participants had finished working in asbestos exposure conditions more than 20 years ago (on average 26.1±11.0 years). The fibre burden resulted with a geometric mean equal to 2.0 (95% CI 1.6 to 2.4) million fibres per gram of dry lung tissue. The burden was higher among participants employed in asbestos textiles industry and in shipyards with insulation material, if compared with construction workers or non-asbestos textile workers or participants working in chemicals or as auto mechanics. 91.3% of MPMs had a detectable amount of amphibole fibres. A strong lung clearance capability was evident among workers exposed to chrysotile fibres. Owing to that, the 1997 Helsinki Criteria for occupational exposure were reached in industry, in chemical or textile industry and among those performing brake repair activities. The MPM cases are now occurring in Italy in participants who ceased occupational asbestos exposure decades before the analysis. A large majority still shows a residual content of amphibole fibres, but given the lung clearance capability, attribution to occupational exposure cannot rely only on fibres detection. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  18. Gene expression profiles in asbestos-exposed epithelial and mesothelial lung cell lines

    Directory of Open Access Journals (Sweden)

    Kaski Samuel

    2007-03-01

    Full Text Available Abstract Background Asbestos has been shown to cause chromosomal damage and DNA aberrations. Exposure to asbestos causes many lung diseases e.g. asbestosis, malignant mesothelioma, and lung cancer, but the disease-related processes are still largely unknown. We exposed the human cell lines A549, Beas-2B and Met5A to crocidolite asbestos and determined time-dependent gene expression profiles by using Affymetrix arrays. The hybridization data was analyzed by using an algorithm specifically designed for clustering of short time series expression data. A canonical correlation analysis was applied to identify correlations between the cell lines, and a Gene Ontology analysis method for the identification of enriched, differentially expressed biological processes. Results We recognized a large number of previously known as well as new potential asbestos-associated genes and biological processes, and identified chromosomal regions enriched with genes potentially contributing to common responses to asbestos in these cell lines. These include genes such as the thioredoxin domain containing gene (TXNDC and the potential tumor suppressor, BCL2/adenovirus E1B 19kD-interacting protein gene (BNIP3L, GO-terms such as "positive regulation of I-kappaB kinase/NF-kappaB cascade" and "positive regulation of transcription, DNA-dependent", and chromosomal regions such as 2p22, 9p13, and 14q21. We present the complete data sets as Additional files. Conclusion This study identifies several interesting targets for further investigation in relation to asbestos-associated diseases.

  19. Microarray data and gene expression statistics for Saccharomyces cerevisiae exposed to simulated asbestos mine drainage

    Directory of Open Access Journals (Sweden)

    Heather E. Driscoll

    2017-08-01

    Full Text Available Here we describe microarray expression data (raw and normalized, experimental metadata, and gene-level data with expression statistics from Saccharomyces cerevisiae exposed to simulated asbestos mine drainage from the Vermont Asbestos Group (VAG Mine on Belvidere Mountain in northern Vermont, USA. For nearly 100 years (between the late 1890s and 1993, chrysotile asbestos fibers were extracted from serpentinized ultramafic rock at the VAG Mine for use in construction and manufacturing industries. Studies have shown that water courses and streambeds nearby have become contaminated with asbestos mine tailings runoff, including elevated levels of magnesium, nickel, chromium, and arsenic, elevated pH, and chrysotile asbestos-laden mine tailings, due to leaching and gradual erosion of massive piles of mine waste covering approximately 9 km2. We exposed yeast to simulated VAG Mine tailings leachate to help gain insight on how eukaryotic cells exposed to VAG Mine drainage may respond in the mine environment. Affymetrix GeneChip® Yeast Genome 2.0 Arrays were utilized to assess gene expression after 24-h exposure to simulated VAG Mine tailings runoff. The chemistry of mine-tailings leachate, mine-tailings leachate plus yeast extract peptone dextrose media, and control yeast extract peptone dextrose media is also reported. To our knowledge this is the first dataset to assess global gene expression patterns in a eukaryotic model system simulating asbestos mine tailings runoff exposure. Raw and normalized gene expression data are accessible through the National Center for Biotechnology Information Gene Expression Omnibus (NCBI GEO Database Series GSE89875 (https://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSE89875.

  20. Controlled erosion in asbestos-cement pipe used in drinking water distribution systems

    Directory of Open Access Journals (Sweden)

    Mariana Ramos, P.

    1990-06-01

    Full Text Available Samples of asbestos-cement pipe used for drinking water conveyance, were submerged in distilled water, and subjected to two controlled erosive treatments, namely agitation (300 rpm for 60 min and ultrasound (47 kHz for 30 min. SEM was used to observe and compare the morphology of the new pipe with and without erosive treatment, and of samples taken from asbestos-cement pipes used in the distribution system of drinking water in Santiago city for 10 and 40-years of service. TEM was used to determine the concentration of asbestos fibers in the test water: 365 MFL and 1690 MFL (millions of fibers per litre as an agitation and result ultrasound, respectively. The erosive treatments by means of agitation or ultrasound applied to new asbestos-cement pipes used in the drinking water distribution system were evaluated as being equivalent to 4 and 10 years of service, respectively.

    Se sometió a dos tratamientos erosivos controlados uno por agitación (300 rpm, 60 min. y otro por ultrasonido (47 kHz, 30 min. a muestras de tubos de asbesto cemento, sumergidas en agua destilada, usados para el trasporte de agua potable. Con SEM se observó la morfología de muestras de tubos sin uso, con y sin tratamiento erosivo y la de muestras extraídas de tubos de asbesto cemento de la red de distribución de agua potable de ía ciudad de Santiago con 10 y 14 años de servicio. Con TEM se determinó la concentración de fibras de asbesto en el agua de ensayo: 365 MFL y 1690 MFL (millones de fibras por litro en agitación y ultrasonido, respectivamente. Se estimó en 4 y 10 años de servicio equivalente los tratamientos erosivos de agitación y ultrasonido, respectivamente en tubos de asbesto cemento empleados en la red de agua potable.

  1. Malignant Mesothelioma of Spermatic Cord in an Elderly Man With a History of Asbestos Exposure.

    Science.gov (United States)

    D'Antonio, Antonio; Mastella, Federica; Colucci, Angelo; Silvestre, Gianmarco

    2016-01-01

    We report a case of malignant mesothelioma of the spermatic cord in 80-year-old man presented with retained testis, hydrocele, and right inguinal mass. The patient had a long history of asbestos exposure as a railway worker. The patient was submitted to inguinal radical orchiectomy. One year after surgery, the patient is alive without signs of disease. Malignant mesothelioma of spermatic cord is a very rare disease, but this diagnosis should be suspected in patient with a history of asbestos exposure. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Data Sharing Report Characterization of Isotope Row Facilities Oak Ridge National Laboratory Oak Ridge TN

    Energy Technology Data Exchange (ETDEWEB)

    Weaver, Phyllis C. [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States)

    2013-12-12

    The U.S. Department of Energy (DOE) Oak Ridge Office of Environmental Management (EM-OR) requested that Oak Ridge Associated Universities (ORAU), working under the Oak Ridge Institute for Science and Education (ORISE) contract, provide technical and independent waste management planning support using funds provided by the American Recovery and Reinvestment Act (ARRA). Specifically, DOE EM-OR requested ORAU to plan and implement a survey approach, focused on characterizing the Isotope Row Facilities located at the Oak Ridge National Laboratory (ORNL) for future determination of an appropriate disposition pathway for building debris and systems, should the buildings be demolished. The characterization effort was designed to identify and quantify radiological and chemical contamination associated with building structures and process systems. The Isotope Row Facilities discussed in this report include Bldgs. 3030, 3031, 3032, 3033, 3033A, 3034, 3036, 3093, and 3118, and are located in the northeast quadrant of the main ORNL campus area, between Hillside and Central Avenues. Construction of the isotope production facilities was initiated in the late 1940s, with the exception of Bldgs. 3033A and 3118, which were enclosed in the early 1960s. The Isotope Row facilities were intended for the purpose of light industrial use for the processing, assemblage, and storage of radionuclides used for a variety of applications (ORNL 1952 and ORAU 2013). The Isotope Row Facilities provided laboratory and support services as part of the Isotopes Production and Distribution Program until 1989 when DOE mandated their shutdown (ORNL 1990). These facilities performed diverse research and developmental experiments in support of isotopes production. As a result of the many years of operations, various projects, and final cessation of operations, production was followed by inclusion into the surveillance and maintenance (S&M) project for eventual decontamination and decommissioning (D&D). The

  3. Chest CT study of patients with asbestos exposure, 1

    International Nuclear Information System (INIS)

    Hatakeyama, Masayuki

    1988-01-01

    Thin-slice high-resolution computed tomographic (CT) findings of 36 patients (34 men, 2 women) with histories of long-term (11 to 43 years) occupational asbestos exposure (AS) were analyzed for pulmonary abnormalities, which were classified by the subpleural curvilinear shadow (SCLS) and/or the extent of honeycomb shadow (HS) into five types (O to IV). SCLS was detected in 22 patients (62 %), and HS in 14 patients (39 %). SCLS was distributed mainly in the lower lobe in patients with mild pulmonary fibrosis (Types I and II) and in segments where fibrosis was mild in patients with HS (Types III and IV). This may reflect the initiation of pulmonary fibrosis leading to the formation of a HS. Most (63.7 %) SCLS measured > 5 cm but < 10 cm in length and occurred < 1 cm from the inner chest wall in all cases. Radiologic-pathologic correlation of SCLS and HS in CT imagings, achieved in two post mortem specimens, seemed to indicate that SCLS was associated with the initial change of fibrosing bronchiolo-alveolitis, which is characteristic of pulmonary asbestosis. Thin-slice high-resolution CT findings of 36 patients with AS and 33 patients with idiopathic interstitial pneumonia (IIP) were compared. Though the incidence of SCLS was low (21 %) in this series of IIP, its presence suggests that SCLS is not specific to pulmonary asbestosis but occurs also in chronic interstitial pneumonia. In order to explore the mechanism of the appearance of SCLS, further analysis of CT and histopathologic findings not only of pulmonary asbestosis and IIP but also of many other pulmonary interstitial diseases is necessary. It could be considered that thin-slice high-resolution CT which first detected SCLS is very useful in the visualization of fine structures of the lungs. (author)

  4. New Location Improves Efficiency | Poster

    Science.gov (United States)

    By Nancy Parrish, Staff Writer The physical proximity of the SAIC-Frederick Intellectual Property (IP) Office to the NCI Technology Transfer Center (NCI-TTC) is one of the many benefits of being at the Advanced Technology Research Facility (ATRF), according to Courtney Silverthorn, Ph.D. Being in one location “has increased the effectiveness of both informal communication and

  5. Aviation Flight Support Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility consists of a 75' x 200' hanger with two adjacent helicopter pads located at Felker Army Airfield on Fort Eustis. A staff of Government and contractor...

  6. Field Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Field Research Facility (FRF) located in Duck, N.C. was established in 1977 to support the U.S. Army Corps of Engineers' coastal engineering mission. The FRF is...

  7. VT Telecommunication Facilities

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The UtilityTelecom_TELEFAC data layer contains points which are intended to represent the location of telecommunications facilities (towers and/or...

  8. Liquid Effluent Retention Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Liquid Effluent Retention Facility (LERF) is located in the central part of the Hanford Site. LERF is permitted by the State of Washington and has three liquid...

  9. EPA Facility Registry Service (FRS): RADINFO

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  10. EPA Facility Registry Service (FRS): NEI

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  11. EPA Facility Registry Service (FRS): BIA

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  12. EPA Facility Registry Service (FRS): BRAC

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  13. EPA Facility Registry Service (FRS): NCDB

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  14. EPA Facility Registry Service (FRS): TRI

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  15. EPA Facility Registry Service (FRS): ICIS

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  16. EPA Facility Registry Service (FRS): OIL

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link to the Oil...

  17. EPA Facility Registry Service (FRS): RBLC

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  18. EPA Facility Registry System (FRS): NCES

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry System (FRS) for the subset of facilities that link...

  19. EPA Facility Registry Service (FRS): CAMDBS

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link...

  20. EPA Facility Registry System (FRS): NEPT

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry System (FRS) for the subset of facilities that link...