WorldWideScience

Sample records for facilities including construction

  1. Facility design, construction, and operation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    France has been disposing of low-level radioactive waste (LLW) at the Centre de Stockage de la Manche (CSM) since 1969 and now at the Centre de Stockage de l`Aube (CSA) since 1992. In France, several agencies and companies are involved in the development and implementation of LLW technology. The Commissariat a l`Energie Atomic (CEA), is responsible for research and development of new technologies. The Agence National pour la Gestion des Dechets Radioactifs is the agency responsible for the construction and operation of disposal facilities and for wastes acceptance for these facilities. Compagnie Generale des Matieres Nucleaires provides fuel services, including uranium enrichment, fuel fabrication, and fuel reprocessing, and is thus one generator of LLW. Societe pour les Techniques Nouvelles is an engineering company responsible for commercializing CEA waste management technology and for engineering and design support for the facilities. Numatec, Inc. is a US company representing these French companies and agencies in the US. In Task 1.1 of Numatec`s contract with Martin Marietta Energy Systems, Numatec provides details on the design, construction and operation of the LLW disposal facilities at CSM and CSA. Lessons learned from operation of CSM and incorporated into the design, construction and operating procedures at CSA are identified and discussed. The process used by the French for identification, selection, and evaluation of disposal technologies is provided. Specifically, the decisionmaking process resulting in the change in disposal facility design for the CSA versus the CSM is discussed. This report provides` all of the basic information in these areas and reflects actual experience to date.

  2. Construction Safety for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Predmore, R

    2000-09-01

    This Construction Safety Program (CSP) for the National Ignition Facility (NIF) presents safety protocols and guidelines that management and workers shall follow to assure a safe and healthful work environment. Appendix A, a separate companion document, includes further applicable environmental, safety, and health requirements for the NIF Project. Specifically this document: {sm_bullet} Defines the fundamental site safety philosophy, {sm_bullet} Identifies management roles and responsibilities, {sm_bullet} Defines core safety management processes, {sm_bullet} Identifies LLNL institutional requirements, and {sm_bullet} Defines the functional areas and facilities accrued by the program and the process for transition of facilities, functional areas, and/or systems from construction to activation. Anyone willfully or thoughtlessly disregarding standards will be subject to immediate removal from the site. Thorough job planning will help ensure that these standards are met.

  3. The status of LILW disposal facility construction in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min-Seok; Chung, Myung-Sub; Park, Kyu-Wan [Korea Radioactive Waste Management Corporation (KRMC), 89, Bukseong-ro, Gyeongju-si,, Gyeongsangbuk-do (Korea, Republic of)

    2013-07-01

    In this paper, we discuss the experiences during the construction of the first LILW disposal facility in South Korea. In December 2005, the South Korean Government designated Gyeongju-city as a host city of Low- and Intermediate-Level Radioactive Waste(LILW) disposal site through local referendums held in regions whose local governments had applied to host disposal facility in accordance with the site selection procedures. The LILW disposal facility is being constructed in Bongilri, Yangbuk-myeon, Gyeongju. The official name of the disposal facility is called 'Wolsong Low and Intermediate Level Radioactive Waste Disposal Center (LILW Disposal Center)'. It can dispose of 800,000 drums of radioactive wastes in a site of 2,100,000 square meters. At the first stage, LILW repository of underground silo type with disposal capacity of 100,000 drums is under construction expected to be completed by June of 2014. The Wolsong Low and Intermediate Level Radioactive Waste Disposal Center consists of surface facilities and underground facilities. The surface facilities include a reception and inspection facility, an interim storage facility, a radioactive waste treatment building, and supporting facilities such as main control center, equipment and maintenance shop. The underground facilities consist of a construction tunnel for transport of construction equipment and materials, an operation tunnel for transport of radioactive waste, an entrance shaft for workers, and six silos for final disposal of radioactive waste. As of Dec. 2012, the overall project progress rate is 93.8%. (authors)

  4. Construction Cost Growth for New Department of Energy Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kubic, Jr., William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-05-25

    Cost growth and construction delays are problems that plague many large construction projects including the construction of new Department of Energy (DOE) nuclear facilities. A study was conducted to evaluate cost growth of large DOE construction projects. The purpose of the study was to compile relevant data, consider the possible causes of cost growth, and recommend measures that could be used to avoid extreme cost growth in the future. Both large DOE and non-DOE construction projects were considered in this study. With the exception of Chemical and Metallurgical Research Building Replacement Project (CMRR) and the Mixed Oxide Fuel Fabrication Facility (MFFF), cost growth for DOE Nuclear facilities is comparable to the growth experienced in other mega construction projects. The largest increase in estimated cost was found to occur between early cost estimates and establishing the project baseline during detailed design. Once the project baseline was established, cost growth for DOE nuclear facilities was modest compared to non-DOE mega projects.

  5. Construction of high magnetic field facilities approved

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ On 25 January, the National Development and Reform Commission gave the green light to a proposal to construct high magnetic field facilities for experimental use. The suggestion was jointly submitted by the Ministry of Education and CAS.

  6. 42 CFR 136.110 - Facilities construction.

    Science.gov (United States)

    2010-10-01

    ... in the procurement standards for HHS grantees made applicable by subpart P of 45 CFR part 74. (4... 42 Public Health 1 2010-10-01 2010-10-01 false Facilities construction. 136.110 Section 136.110..., DEPARTMENT OF HEALTH AND HUMAN SERVICES INDIAN HEALTH Grants for Development, Construction, and Operation...

  7. National Ignition Facility wet weather construction plan

    Energy Technology Data Exchange (ETDEWEB)

    Kugler, A N

    1998-01-01

    This report presents a wet weather construction plan for the National Ignition Facility (NIF) construction project. Construction of the NIF commenced in mid- 1997, and excavation of the site was completed in the fall. Preparations for placing concrete foundations began in the fall, and above normal rainfall is expected over the tinter. Heavy rainfall in late November impacted foundation construction, and a wet weather construction plan was determined to be needed. This wet weather constiction plan recommends a strategy, techniques and management practices to prepare and protect the site corn wet weather effects and allow construction work to proceed. It is intended that information in this plan be incorporated in the Stormwater Pollution Prevention Plan (SWPPP) as warranted.

  8. Construction of STACY (Static Experiment Critical Facility)

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, Kiyonobu; Onodera, Seiji; Hirose, Hideyuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    1998-08-01

    Two critical assemblies, STACY (Static Experiment Critical Facility) and TRACY (Transient Experiment Critical Facility), were constructed in NUCEF (Nuclear Fuel Cycle Safety Engineering Research Facility) to promote researches on the criticality safety at a reprocessing facility. STACY aims at providing critical data of uranium nitrate solution, plutonium nitrate solution and their mixture while varying concentration of solution fuel, core tank shape and size and neutron reflecting condition. STACY achieved first criticality in February 1995, and passed the licensing inspection by STA (Science and Technology Agency of Japan) in May. After that a series of critical experiments commenced with 10 w/o enriched uranium solution. This report describes the outline of STACY at the end of FY 1996. (author)

  9. Budget estimates: Fiscal year 1994. Volume 2: Construction of facilities

    Science.gov (United States)

    1994-01-01

    The Construction of Facilities (CoF) appropriation provides contractual services for the repair, rehabilitation, and modification of existing facilities; the construction of new facilities and the acquisition of related collateral equipment; the acquisition or condemnation of real property; environmental compliance and restoration activities; the design of facilities projects; and advanced planning related to future facilities needs. Fiscal year 1994 budget estimates are broken down according to facility location of project and by purpose.

  10. 21 CFR 200.10 - Contract facilities (including consulting laboratories) utilized as extramural facilities by...

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Contract facilities (including consulting... GENERAL General Provisions § 200.10 Contract facilities (including consulting laboratories) utilized as... Cosmetic Act specifically authorizes inspection of consulting laboratories as well as any factory...

  11. NIF conventional facilities construction health and safety plan

    Energy Technology Data Exchange (ETDEWEB)

    Benjamin, D W

    1998-05-14

    The purpose of this Plan is to outline the minimum health and safety requirements to which all participating Lawrence Livermore National Laboratory (LLNL) and non-LLNL employees (excluding National Ignition Facility [NIF] specific contractors and subcontractors covered under the construction subcontract packages (e.g., CSP-9)-see Construction Safety Program for the National Ignition Facility [CSP] Section I.B. ''NIF Construction Contractors and Subcontractors'' for specifics) shall adhere to for preventing job-related injuries and illnesses during Conventional Facilities construction activities at the NIF Project. For the purpose of this Plan, the term ''LLNL and non-LLNL employees'' includes LLNL employees, LLNL Plant Operations staff and their contractors, supplemental labor, contract labor, labor-only contractors, vendors, DOE representatives, personnel matrixed/assigned from other National Laboratories, participating guests, and others such as visitors, students, consultants etc., performing on-site work or services in support of the NIF Project. Based upon an activity level determination explained in Section 1.2.18, in this document, these organizations or individuals may be required by site management to prepare their own NIF site-specific safety plan. LLNL employees will normally not be expected to prepare a site-specific safety plan. This Plan also outlines job-specific exposures and construction site safety activities with which LLNL and non-LLNL employees shall comply.

  12. Design and construction of thermal striping test facility

    Energy Technology Data Exchange (ETDEWEB)

    Han, D. H.; Kim, J. M.; Nam, H. Y.; Choi, J. H.; Choi, B. H.; Jeong, J. Y.; Jeong, K. C.; Park, J. H.; Kim, T. J.; Kim, B. H

    2003-12-01

    Test facility was designed and constructed to generate of experimental data for the validation of turbulence model for analyzing thermal striping phenomena. Test facility consists mainly of test section, heat transfer system and control system. In this report design and construction process of test facility was described in detail.

  13. Progress on Radioactive Waste Treatment Facilities Construction

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In 2011, five projects were undertaken by radioactive waste projects management department, which are "Cold Commissioning of the Pilot Project on Radioactive Waste Retrieval and Conditioning (abbreviation 'Pilot Project')", "Radioactive Ventilation Project Construction (abbreviation 'Ventilation

  14. Management Information Control Systems for Educational Facility Construction Programs.

    Science.gov (United States)

    Halverson, Walter S.

    1989-01-01

    Describes a computerized management information control system for an educational facility construction program that allows access to more than 50 major system applications, using over 5,000 programs. (MLF)

  15. Construction of calibration pads facility, Walker Field, Grand Junction, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Ward, D.L.

    1978-08-01

    A gamma-ray spectrometer facility was completed at Walker Field Airport, Grand Junction, Colorado, in November 1976. This report describes spectrometers and their calibration, the construction of the spectrometer facility, the radioelement concentrations, procedures for using the facilites, and environmental considerations. (LK)

  16. Construction of thermal ratchet structural test facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyeong Yeon; Kim, J. B.; Yoo, B

    2000-12-01

    The objective of this study is to setup the thermal ratchet test facility to validate the NONSTA code that is under development for the inelastic structure analysis and to characterize the thermal ratchet behavior through structural thermal ratchet test. Thermal ratchet phenomenon, a progressive inelastic deformation can occur in the liquid metal reactor operating at high temperature above 500 deg C due to the moving temperature distribution along the axial direction as the hot free surface moves up and down due to the cyclic heat-up and cool-down of reactor operation. Thermal ratchet can cause a severe damage to the reactor structure. The structural ratchet test was performed and the test results were compared with those of the analysis using Chaboche constitutive model. The fabrication of the ratchet test facility was completed in 1/4 of 2000, the performance test was carried out in the second quarter of 2000, the noise reduction of thermocouples, measurements by laser displacement sensor with data acquisition system was carried out in the third quarter and the test results compared with those of the inelastic structure analysis in the forth quarter of 2000, which showed reasonable agreement with those of the tests.

  17. Indigenous Construction Materials for Theater Facilities

    Science.gov (United States)

    2013-09-01

    example, tools such as a hammer and nails for wood construction, or masonry tools for adobe, are easier to use than those needed to build a Hesco...Stabilizers result in an increase in soil strength and cohesion, reduced permeability , increased durability, and less soil expansion and shrinkage in wet...9 Soil-Cement 1 Water 7 Cement 2 Earth mortar 16 Wood 3 Nails 13 Stone 10 Foam 15

  18. New constructive solutions for building of transport construction facilities

    Directory of Open Access Journals (Sweden)

    Babayev Vladimir

    2017-01-01

    Full Text Available New structural systems for civil and transport engineering were examined. The basis for the formation of the proposed reinforced concrete structures is the ideology of reducing its dead weight, with a given bearing capacity, the realization of which is accomplished by burial during concreting large-sized liners of a given shape and manufactured from lightweight, inexpensive composite materials. The process of erecting these systems is presented in two forms: for flat structures - using self-tightening concrete, and for curvilinear ones - by using shotcrete technologies. The second direction is presented by steel-reinforced concrete structures. These structural systems were created on the basis of innovative component and methods of rationalization of parameters. The basis of the above methods is a compiler which includes the finite element method, adaptive evolution method and special iterative procedures. Experimental verification of structural solutions and formation procedures for suggested systems was performed. Comparison between theoretical and experimental data is given. Suggested systems were implemented in a number of building companies.

  19. Strategies for healthcare facilities, construction, and real estate management.

    Science.gov (United States)

    Lee, James G

    2012-05-01

    Adventist HealthCare offers the following lessons learned in improving the value of healthcare facilities, construction, and real estate management: Use an integrated approach. Ensure that the objectives of the approach align the hospital or health system's mission and values. Embrace innovation. Develop a plan that applies to the whole organization, rather than specific business units. Ensure commitment of senior leaders.

  20. Current trends in health facility planning, design, and construction.

    Science.gov (United States)

    Beale, Craig; Kittredge, Frank D

    2014-01-01

    It is critical now more than ever for today's healthcare facilities to serve as more than just a backdrop to the care provided--they can, and should, be an integral part of that care. In addition to promoting efficacy, delighting the senses, and placing patients and families at ease, facilities need to be high-performing, sustainable, and healthy environments. Creating today's healthcare facilities requires breaking through barriers in unexpected ways, and it often requires looking outside the healthcare profession for guidance. In this article, we explore current trends in health facility planning, design, and construction. Our focus is on the buildings that serve as venues for the provision of healthcare services across the full continuum, from prevention to critical care. In particular, we discuss four current broad trends and conclude with thoughts on future developments.

  1. Design and Construction of a Hydroturbine Test Facility

    Science.gov (United States)

    Ayli, Ece; Kavurmaci, Berat; Cetinturk, Huseyin; Kaplan, Alper; Celebioglu, Kutay; Aradag, Selin; Tascioglu, Yigit; ETU Hydro Research Center Team

    2014-11-01

    Hydropower is one of the clean, renewable, flexible and efficient energy resources. Most of the developing countries invest on this cost-effective energy source. Hydroturbines for hydroelectric power plants are tailor-made. Each turbine is designed and constructed according to the properties, namely the head and flow rate values of the specific water source. Therefore, a center (ETU Hydro-Center for Hydro Energy Research) for the design, manufacturing and performance tests of hydraulic turbines is established at TOBB University of Economics and Technology to promote research in this area. CFD aided hydraulic and structural design, geometry optimization, manufacturing and performance tests of hydraulic turbines are the areas of expertise of this center. In this paper, technical details of the design and construction of this one of a kind test facility in Turkey, is explained. All the necessary standards of IEC (International Electrotechnical Commission) are met since the test facility will act as a certificated test center for hydraulic turbines.

  2. Manhattan Project buildings and facilities at the Hanford Site: A construction history

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, M.S.

    1993-09-01

    This document thoroughly examines the role that the Hanford Engineer Works played in the Manhattan project. The historical aspects of the buildings and facilities are characterized. An in depth look at the facilities, including their functions, methods of fabrication and appearance is given for the 100 AREAS, 200 AREAS, 300 AREAS, 500, 800 and 900 AREAS, 600 AREA, 700 AREA, 1100 AREA and temporary construction structures.

  3. Construction safety program for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cerruti, S.J.

    1997-01-01

    The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF`s management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES&H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES&H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES&H support organizations and administrative groups, and describes their interactions with the NIF Program.

  4. Construction and Commissioning of PAL-XFEL Facility

    Directory of Open Access Journals (Sweden)

    In Soo Ko

    2017-05-01

    Full Text Available The construction of Pohang Accelerator Laboratory X-ray Free-Electron Laser (PAL-XFEL, a 0.1-nm hard X-ray free-electron laser (FEL facility based on a 10-GeV S-band linear accelerator (LINAC, is achieved in Pohang, Korea by the end of 2016. The construction of the 1.11 km-long building was completed by the end of 2014, and the installation of the 10-GeV LINAC and undulators started in January 2015. The installation of the 10-GeV LINAC, together with the undulators and beamlines, was completed by the end of 2015. The commissioning began in April 2016, and the first lasing of the hard X-ray FEL line was achieved on 14 June 2016. The progress of the PAL-XFEL construction and its commission are reported here.

  5. Design and Construction of a Scaled Whirl Tower Facility

    Science.gov (United States)

    Pickard, John Alexander

    Experimental development of helicopter rotors requires centrifugal testing before entry into a wind tunnel or flight test campaign. This centrifugal testing is performed on test rigs called whirl towers. These facilities are very rare, in fact there were none available in Canada at the time of writing this thesis, but they are very valuable experimental research tools. This thesis describes the design and construction of a whirl tower facility for the centrifugal testing of scaled helicopter rotors with actively controlled systems for reducing vibration. First, the trade-offs between the desired capabilities for the facility to be designed are reviewed, leading to the identification of a set of design requirements. Following this, various concepts for the drive system, frame, data acquisition, and safety infrastructure are proposed. From these, a final design is assembled, whose main advantage is its flexibility and robustness for developmental research. The whirl tower is capable of testing single or multi-bladed rotors (up to four blades), with blades between 1.0 and 1.6 m radius, up to 1,800 RPM frequency with no 'dead zones'. The whirl tower is equipped with a 60 HP, 575 V, AC motor, with flexible coupling and direct drive to the scaled rotor hub. The facility also features a digital telemetry system, slip rings for power and signal transmission for active control, interchangeable rotor heads with variable root distance, and a containment wall for protection from possible rotor blade failures. The manufacturing and construction of the facility, as well as its installation at the National Research Council in Ottawa, is described in detail.

  6. 42 CFR 137.275 - May Self-Governance Tribes include IHS construction programs in a construction project agreement...

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false May Self-Governance Tribes include IHS construction... OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Purpose and Scope § 137.275 May Self-Governance Tribes include IHS construction programs in a construction project agreement or in a...

  7. LSST summit facility construction progress report: reacting to design refinements and field conditions

    Science.gov (United States)

    Barr, Jeffrey D.; Gressler, William; Sebag, Jacques; Seriche, Jaime; Serrano, Eduardo

    2016-07-01

    The civil work, site infrastructure and buildings for the summit facility of the Large Synoptic Survey Telescope (LSST) are among the first major elements that need to be designed, bid and constructed to support the subsequent integration of the dome, telescope, optics, camera and supporting systems. As the contracts for those other major subsystems now move forward under the management of the LSST Telescope and Site (T and S) team, there has been inevitable and beneficial evolution in their designs, which has resulted in significant modifications to the facility and infrastructure. The earliest design requirements for the LSST summit facility were first documented in 2005, its contracted full design was initiated in 2010, and construction began in January, 2015. During that entire development period, and extending now roughly halfway through construction, there continue to be necessary modifications to the facility design resulting from the refinement of interfaces to other major elements of the LSST project and now, during construction, due to unanticipated field conditions. Changes from evolving interfaces have principally involved the telescope mount, the dome and mirror handling/coating facilities which have included significant variations in mass, dimensions, heat loads and anchorage conditions. Modifications related to field conditions have included specifying and testing alternative methods of excavation and contending with the lack of competent rock substrate where it was predicted to be. While these and other necessary changes are somewhat specific to the LSST project and site, they also exemplify inherent challenges related to the typical timeline for the design and construction of astronomical observatory support facilities relative to the overall development of the project.

  8. Mixed Waste Management Facility (MWMF) closure, Savannah River Plant: Clay cap test section construction report

    Energy Technology Data Exchange (ETDEWEB)

    1988-02-26

    This report contains appendix 2 for the Clay Cap Test Section Construction Report for the Mixed Waste Management Facility (MWMF) closure at the Savannah River Plant. The Clay Cap Test Program was conducted to evaluate the source, Laboratory permeability, and compaction characteristics representative of Kaolin clays from the aiken, South Carolina vicinity. Included in this report are daily field reports Nos. 1 to 54. (KJD)

  9. The Methodology of Interactive Parametric Modelling of Construction Site Facilities in BIM Environment

    Science.gov (United States)

    Kozlovská, Mária; Čabala, Jozef; Struková, Zuzana

    2014-11-01

    Information technology is becoming a strong tool in different industries, including construction. The recent trend of buildings designing is leading up to creation of the most comprehensive virtual building model (Building Information Model) in order to solve all the problems relating to the project as early as in the designing phase. Building information modelling is a new way of approaching to the design of building projects documentation. Currently, the building site layout as a part of the building design documents has a very little support in the BIM environment. Recently, the research of designing the construction process conditions has centred on improvement of general practice in planning and on new approaches to construction site layout planning. The state of art in field of designing the construction process conditions indicated an unexplored problem related to connection of knowledge system with construction site facilities (CSF) layout through interactive modelling. The goal of the paper is to present the methodology for execution of 3D construction site facility allocation model (3D CSF-IAM), based on principles of parametric and interactive modelling.

  10. Status of the FLARE (Facility for Laboratory Reconnection Experiments) Construction Project and Plans as a User Facility

    Science.gov (United States)

    Ji, H.; Bhattacharjee, A.; Prager, S.; Daughton, W.; Chen, Y.; Cutler, R.; Fox, W.; Hoffmann, F.; Kalish, M.; Jara-Almonte, J.; Myers, C.; Ren, Y.; Yamada, M.; Yoo, J.; Bale, S. D.; Carter, T.; Dorfman, S.; Drake, J.; Egedal, J.; Sarff, J.; Wallace, J.

    2016-10-01

    The FLARE device (flare.pppl.gov) is a new intermediate-scale plasma experiment under construction at Princeton for the studies of magnetic reconnection in the multiple X-line regimes directly relevant to space, solar, astrophysical, and fusion plasmas, as guided by a reconnection phase diagram [Ji & Daughton, (2011)]. Most of major components either have been already fabricated or are near their completion, including the two most crucial magnets called flux cores. The hardware assembly and installation begin in this summer, followed by commissioning in 2017. Initial comprehensive set of research diagnostics will be constructed and installed also in 2017. The main diagnostics is an extensive set of magnetic probe arrays, covering multiple scales from local electron scales, to intermediate ion scales, and global MHD scales. The planned procedures and example topics as a user facility will be discussed.

  11. Lead Coolant Test Facility Technical and Functional Requirements, Conceptual Design, Cost and Construction Schedule

    Energy Technology Data Exchange (ETDEWEB)

    Soli T. Khericha

    2006-09-01

    This report presents preliminary technical and functional requirements (T&FR), thermal hydraulic design and cost estimate for a lead coolant test facility. The purpose of this small scale facility is to simulate lead coolant fast reactor (LFR) coolant flow in an open lattice geometry core using seven electrical rods and liquid lead or lead-bismuth eutectic. Based on review of current world lead or lead-bismuth test facilities and research need listed in the Generation IV Roadmap, five broad areas of requirements of basis are identified: Develop and Demonstrate Prototype Lead/Lead-Bismuth Liquid Metal Flow Loop Develop and Demonstrate Feasibility of Submerged Heat Exchanger Develop and Demonstrate Open-lattice Flow in Electrically Heated Core Develop and Demonstrate Chemistry Control Demonstrate Safe Operation and Provision for Future Testing. These five broad areas are divided into twenty-one (21) specific requirements ranging from coolant temperature to design lifetime. An overview of project engineering requirements, design requirements, QA and environmental requirements are also presented. The purpose of this T&FRs is to focus the lead fast reactor community domestically on the requirements for the next unique state of the art test facility. The facility thermal hydraulic design is based on the maximum simulated core power using seven electrical heater rods of 420 kW; average linear heat generation rate of 300 W/cm. The core inlet temperature for liquid lead or Pb/Bi eutectic is 420oC. The design includes approximately seventy-five data measurements such as pressure, temperature, and flow rates. The preliminary estimated cost of construction of the facility is $3.7M. It is also estimated that the facility will require two years to be constructed and ready for operation.

  12. New construction of an inside-container drying facility in the central decontamination and water treatment facility (ZDW); Neubau einer Innenfasstrocknungsanlage in der Zentralen Dekontaminations- und Wasseraufbereitungsanlage (ZDW)

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, Martin J.; Koischwitz, Ingmar [GNS Gesellschaft fuer Nuklear-Service mbH, Essen (Germany)

    2013-07-01

    For the future conditioning of radioactive liquid waste during the proceeding dismantling of the NPP Greifswald the GNS company provides the an inside-container drying facility in the frame of the new construction of ZDW (central decontamination and water treatment facility) including related infrastructure and media supply. The concept of the FAVORIT facility which is in operation since years has been refined; a fully automated version was realized so that no handling by the personnel is necessary for loading and unloading of the container station. Components of the vacuum system were optimized.

  13. National Ignition Facility start-up/operations engineering and special equipment construction health and safety plan

    Energy Technology Data Exchange (ETDEWEB)

    Huddleston, P C

    1998-05-08

    This document sets forth the responsibilities, interfaces, guidelines, rules, policy, and regulations for all workers involved in the S/O and SE construction, installation, and acceptance testing. This document is enforced from the first day that S/O and SE workers set foot on the NIF construction site until the end of the Project at Critical Decision 4. This document is applicable only to site activities, which are defined as those that occur within the perimeter of the fenced-off NIF construction zone and the Target Chamber Assembly Area (Helipad). The associated Special Equipment laydown and construction support areas listed in Appendix B are not under this plan; their safety provisions are discussed in the Appendix. Prototype and other support activities, such as the Amplifier Laboratory and Frame Assembly Unit assembly area, are not included in this plan. After completion of the Operational Readiness Review, the Facility Safety Procedure, Operational Safety Requirements, and Operational Safety Procedures are the governing safety documents for the operating facility. The S/O and SE project elements are required to implement measures that create a universal awareness of and promote safe job practices at the site. This includes all Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory, Sandia National Laboratories, University of Rochester, supplement labor organization, and subcontractor employees; visitors; and guests serving the S/O and SE effort.

  14. National Ignition Facility start-up/operations engineering and special equipment construction health and safety plan

    Energy Technology Data Exchange (ETDEWEB)

    Huddleston, P C

    1998-05-08

    This document sets forth the responsibilities, interfaces, guidelines, rules, policy, and regulations for all workers involved in the S/O and SE construction, installation, and acceptance testing. This document is enforced from the first day that S/O and SE workers set foot on the NIF construction site until the end of the Project at Critical Decision 4. This document is applicable only to site activities, which are defined as those that occur within the perimeter of the fenced-off NIF construction zone and the Target Chamber Assembly Area (Helipad). The associated Special Equipment laydown and construction support areas listed in Appendix B are not under this plan; their safety provisions are discussed in the Appendix. Prototype and other support activities, such as the Amplifier Laboratory and Frame Assembly Unit assembly area, are not included in this plan. After completion of the Operational Readiness Review, the Facility Safety Procedure, Operational Safety Requirements, and Operational Safety Procedures are the governing safety documents for the operating facility. The S/O and SE project elements are required to implement measures that create a universal awareness of and promote safe job practices at the site. This includes all Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory, Sandia National Laboratories, University of Rochester, supplement labor organization, and subcontractor employees; visitors; and guests serving the S/O and SE effort.

  15. States and compacts: Issues and events affecting facility development efforts, including the Barnwell opening

    Energy Technology Data Exchange (ETDEWEB)

    Larson, G.S.

    1995-12-31

    Ten years have passed since the first regional low-level radioactive waste compacts received Congressional consent and initiated their efforts to develop new disposal capacity. During these 10 years, both significant achievements and serious setbacks have marked our efforts and affect our current outlook. Recent events in the waste marketplace, particularly in the operating status of the Barnwell disposal facility, have now raised legitimate questions about the continued rationale for the regional framework that grew out of the original legislation enacted by Congress in 1980. At the same time, licensing activities for new regional disposal facilities are under way in three states, and a fourth awaits the final go-ahead to begin construction. Uncertainty over the meaning and reliability of the marketplace events makes it difficult to gauge long-term implications. In addition, differences in the status of individual state and compact facility development efforts lead to varying assessments of the influence these events will, or should, have on such efforts.

  16. Construction safety program for the National Ignition Facility, Appendix A

    Energy Technology Data Exchange (ETDEWEB)

    Cerruti, S.J.

    1997-06-26

    Topics covered in this appendix include: General Rules-Code of Safe Practices; 2. Personal Protective Equipment; Hazardous Material Control; Traffic Control; Fire Prevention; Sanitation and First Aid; Confined Space Safety Requirements; Ladders and Stairways; Scaffolding and Lift Safety; Machinery, Vehicles, and Heavy Equipment; Welding and Cutting-General; Arc Welding; Oxygen/Acetylene Welding and Cutting; Excavation, Trenching, and Shoring; Fall Protection; Steel Erection; Working With Asbestos; Radiation Safety; Hand Tools; Electrical Safety; Nonelectrical Work Performed Near Exposed High-Voltage Power-Distribution Equipment; Lockout/Tagout Requirements; Rigging; A-Cranes; Housekeeping; Material Handling and Storage; Lead; Concrete and Masonry Construction.

  17. 36 CFR 1005.7 - Construction of buildings or other facilities.

    Science.gov (United States)

    2010-07-01

    ... AND PRIVATE OPERATIONS § 1005.7 Construction of buildings or other facilities. Constructing or attempting to construct a building, or other structure, boat dock, road, trail, path, or other way, telephone... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Construction of buildings or...

  18. 36 CFR 5.7 - Construction of buildings or other facilities.

    Science.gov (United States)

    2010-07-01

    ... OF THE INTERIOR COMMERCIAL AND PRIVATE OPERATIONS § 5.7 Construction of buildings or other facilities. Constructing or attempting to construct a building, or other structure, boat dock, road, trail, path, or other... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Construction of buildings or...

  19. Safety and environmental process for the design and construction of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Brereton, S.J., LLNL

    1998-05-27

    The National Ignition Facility (NIF) is a U.S. Department of Energy (DOE) laser fusion experimental facility currently under construction at the Lawrence Livermore National Laboratory (LLNL). This paper describes the safety and environmental processes followed by NIF during the design and construction activities.

  20. 30 CFR 56.9303 - Construction of ramps and dumping facilities.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Construction of ramps and dumping facilities... Loading, Hauling, and Dumping Safety Devices, Provisions, and Procedures for Roadways, Railroads, and Loading and Dumping Sites § 56.9303 Construction of ramps and dumping facilities. Ramps and...

  1. Construction safety program for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cerruti, S.J.

    1997-06-26

    The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF.

  2. Construction and commissioning test report of the CEDM test facility

    Energy Technology Data Exchange (ETDEWEB)

    Chung, C. H.; Kim, J. T.; Park, W. M.; Youn, Y. J.; Jun, H. G.; Choi, N. H.; Park, J. K.; Song, C. H.; Lee, S. H.; Park, J. K

    2001-02-01

    The test facility for performance verification of the control element drive mechanism (CEDM) of next generation power plant was installed at the site of KAERI. The CEDM was featured a mechanism consisting of complicated mechanical parts and electromagnetic control system. Thus, a new CEDM design should go through performance verification tests prior to it's application in a reactor. The test facility can simulate the reactor operating conditions such as temperature, pressure and water quality and is equipped with a test chamber to accomodate a CEDM as installed in the power plant. This test facility can be used for the following tests; endurance test, coil cooling test, power measurement and reactivity rod drop test. The commissioning tests for the test facility were performed up to the CEDM test conditions of 320 C and 150 bar, and required water chemistry was obtained by operating the on-line water treatment system.

  3. Construction safety program for the National Ignition Facility Appendix A: Safety Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Cerruti, S.J.

    1997-01-14

    These rules apply to all LLNL employees, non-LLNL employees (including contract labor, supplemental labor, vendors, personnel matrixed/assigned from other National Laboratories, participating guests, visitors and students) and construction contractors/subcontractors. The General Safety and Health rules shall be used by management to promote accident prevention through indoctrination, safety and health training and on-the-job application. As a condition for contracts award, all contractors and subcontractors and their employees must certify on Form S & H A-1 that they have read and understand, or have been briefed and understand, the National Ignition Facility OCIP Project General Safety Rules.

  4. Environmental assessment report: Nuclear Test Technology Complex. [Construction and operation of proposed facility

    Energy Technology Data Exchange (ETDEWEB)

    Tonnessen, K.; Tewes, H.A.

    1982-08-01

    The US Department of Energy (USDOE) is planning to construct and operate a structure, designated the Nuclear Test Technology Complex (NTTC), on a site located west of and adjacent to the Lawrence Livermore National Laboratory. The NTTC is designed to house 350 nuclear test program personnel, and will accommodate the needs of the entire staff of the continuing Nuclear Test Program (NTP). The project has three phases: land acquisition, facility construction and facility operation. The purpose of this environmental assessment report is to describe the activities associated with the three phases of the NTTC project and to evaluate potential environmental disruptions. The project site is located in a rural area of southeastern Alameda County, California, where the primary land use is agriculture; however, the County has zoned the area for industrial development. The environmental impacts of the project include surface disturbance, high noise levels, possible increases in site erosion, and decreased air quality. These impacts will occur primarily during the construction phase of the NTTC project and can be mitigated in part by measures proposed in this report.

  5. Design and construction of the IEA Grimethorpe experimental facility

    Energy Technology Data Exchange (ETDEWEB)

    Broadbent, D.H.; Wright, S.J.; Kaden, M.

    1979-06-01

    In December 1975 the Governments of the United Kingdom, the United States of America, and the Federal Republic of Germany, under the auspices of the International Energy Agency, entered into an agreement to build a large pressurized fluidized bed combustion experimental facility. The function of the facility would be to extend the range of fluidization and combustion characteristics investigated from those of the relatively small rigs then in operation across the whole range of conditions potentially applicable to combined cycle power generation systems. The ranges of conditions to be investigated in the facility are pressures 6 to 12 bar, fluidizing velocity 0.6 to 3.0 m/s and bed temperatures 750 to 950/sup 0/C. The ultimate aim is to seek an optimum condition and establish a data base from which a demonstration plant could be designed and built.

  6. 43 CFR 404.9 - What types of infrastructure and facilities may be included in an eligible rural water supply...

    Science.gov (United States)

    2010-10-01

    ... facilities may be included in an eligible rural water supply project? 404.9 Section 404.9 Public Lands... RURAL WATER SUPPLY PROGRAM Overview § 404.9 What types of infrastructure and facilities may be included in an eligible rural water supply project? A rural water supply project may include, but is...

  7. 77 FR 33782 - License Amendment To Construct and Operate New In Situ Leach Uranium Recovery Facility; Uranium...

    Science.gov (United States)

    2012-06-07

    ... COMMISSION License Amendment To Construct and Operate New In Situ Leach Uranium Recovery Facility; Uranium... referenced. The Ludeman facility In Situ Leach Uranium Recovery Project License Amendment Request is... construct and operate a new in situ leach uranium recovery (ISL) facility at its Ludeman facility...

  8. Direct facile screening of recombinant DNA vector constructs.

    Science.gov (United States)

    Winnard, Paul T; Challa, Rushi; Bhujwalla, Zaver M; Raman, Venu

    2014-04-01

    Direct efficient facile screening of bacterial transformants with the goal of selecting, retrieving, and using recombinant DNA is exemplified by simple visual-based colorimetric inspections or fluorescent protein-based assays. We describe pRedScript, which introduces the constitutive expression of a very bright red fluorescent protein into transformants. On agar plates, red colonies are simply visualized in ambient white light in stark contrast to recombinant transformants that are white. In addition, the bright red fluorescence of the reporter protein can also be harnessed as a sensitive signal for screening bacterial promoters during the development of optimized fermentation conditions.

  9. Cost Reduction Ability by Electricity Tariff Selection for Construction Facilities Located in Non-price Areas

    Directory of Open Access Journals (Sweden)

    Makasheva Svetlana

    2016-01-01

    Full Text Available State of the art in the tariff type selection in the retail and the wholesale electricity market for construction or reconstruction facilities located at Far East are considered. As a management solution the electricity tariff’s selection for enterprises at stage of construction or reconstruction is accented.

  10. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Scott, D.E.; Pechmann, J.H.K.; Knox, J.N.; Estes, R.A.; McGregor, J.H.; Bailey, K. (ed.)

    1988-12-01

    The Savannah River Ecology Laboratory has completed 10 years of ecological studies related to the construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site. This progress report examines water quality studies on streams peripheral to the DWPF construction site and examines the effectiveness of refuge ponds'' in ameliorating the effects of construction on local amphibians. Individual papers on these topics are indexed separately. 93 refs., 15 figs., 15 tabs. (MHB)

  11. 25 CFR 170.807 - What must BIA include when it develops an IRR Transportation Facilities Maintenance Management...

    Science.gov (United States)

    2010-04-01

    ... Transportation Facilities Maintenance Management System? 170.807 Section 170.807 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.807 What must BIA include when it develops an IRR Transportation Facilities Maintenance Management...

  12. Renovation versus New Construction and Building Decision Tool for Educational Facilities

    Directory of Open Access Journals (Sweden)

    Carrie Pope

    2016-01-01

    Full Text Available Renovation of an existing building is an accomplished stem of the construction industry because it supplies financial diversification for construction stakeholders. Although several construction planning tools and stakeholder alignment exercises have been developed, no tool exists to assist project owners to decide between renovating an existing building and new construction with a comprehensive decision criteria. The objective of this research is to create and test a renovation versus new building support decision tool for construction project stakeholders. The renovation versus new building support decision tool was created based on an extensive review of existing support tools and construction industry needs. The created tool was implemented to evaluate decisions of educational facilities by university officials experienced in project management. Results show the tool was effective in identifying relevant topics for discussion and guiding a group of stakeholders through an exercise in decision-making. Specifically, the tool was implemented by construction management personnel for university facilities currently under construction to evaluate the decision to renovate an existing building or new construction. The main contribution of this research is a framework and support decision tool readily implementable for construction project stakeholders desiring to determine if renovation or new construction is the optimal path for their specific objectives.

  13. Design and construction of models for the National Transonic Facility, part 1

    Science.gov (United States)

    Young, C. P., Jr.

    1985-01-01

    The design and construction of models for the National Transonic Facility (NTF) has resulted in significant technology developments in many areas. This lecture covers the development of design criteria and major research and development work that has contributed to the successful design and fabrication models for testing at full scale Reynolds number the NTF. Emphasis is placed on the materials aspect of the design and fabrication proces, including metallic materials, mechanical properties characterization, new steel alloy development, fracture toughness enhancement, and identification of fillers and solders suitable for use in cryogenic models. Quantitative data are provided which will be of value to the potential user of NTF or for application to the design and fabrication of model systems for other cryogenic wind tunnels.

  14. Construction of water intake facilities from partially drying up watercourses

    Directory of Open Access Journals (Sweden)

    Orlov Evgeniy Vladimirovich

    Full Text Available Partially ephemeral streams are complex objects that can still be used for water supply or irrigation of agricultural land. The problem of such streams is poorly studied, because the influence of various environmental factors complicates carrying out any experiments. Also it is not possible to make their full classification due to their very strong variability not only on a particular geographical belt, but also within separate areas of the river. All this undoubtedly complicates the task of the designers when designing the system. Creation of laboratory models, allowing us to evaluate the possibilities of a spring use for the purpose of water supply, is very promising. These watercourses have a large amount of suspended sediments, so it is not possible to use the standard scheme of water using of the coastal and fluvial water intake structures. It is proposed to organize the fight with the sediments in the flow chart of primary clarifiers, which will perform the function of settling suspensions, to facilitate the work of water treatment facilities. Also the creation of artificial prop is useful in order to achieve the required level of water in a watercourse for water organization. If under the bottom of the river there is underground water, and the permeability of the soil is good, it is possible to arrange the withdrawal of water through infiltration intakes, by setting the filter under the bottom of the watercourse with its connection to filter, from which the water will climb to submersible pumps. Additional filtration through the soil of the river bottom allows not using the scheme sumps, which significantly reduces the cost of epy incoming water treatment.

  15. Landfills, Hazardous Waste - CONSTRUCTION_DEMOLITION_WASTE_IDEM_IN: Construction and Demoliton Waste Facilities in Indiana (Indiana Department of Environmental Management, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — CONSTRUCTION_DEMOLITION_WASTE_IDEM_IN is a point shapefile that contains construction and demolition waste facility locations in Indiana, provided by personnel of...

  16. Construction safety program for the National Ignition Facility, Appendix B

    Energy Technology Data Exchange (ETDEWEB)

    Cerruti, S.J.

    1997-06-26

    This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety.

  17. Strategy of Construction and Demolition Waste Management after Chemical Industry Facilities Removal

    Science.gov (United States)

    Tashkinova, I. N.; Batrakova, G. M.; Vaisman, Ya I.

    2017-06-01

    Mixed waste products are generated in the process of irrelevant industrial projects’ removal if conventional techniques of their demolition and dismantling are applied. In Russia the number of unused chemical industry facilities including structures with high rate of wear is growing. In removing industrial buildings and production shops it is used conventional techniques of demolition and dismantling in the process of which mixed waste products are generated. The presence of hazardous chemicals in these wastes makes difficulties for their use and leads to the increasing volume of unutilized residues. In the process of chemical industry facilities’ removal this fact takes on special significance as a high level of hazardous chemicals in the waste composition demands for the realization of unprofitable measures aimed at ensuring environmental and industrial safety. The proposed strategy of managing waste originated from the demolition and dismantling of chemical industry facilities is based on the methodology of industrial metabolism which allows identifying separate material flows of recycled, harmful and ballast components, performing separate collection of components during removal and taking necessary preventive measures. This strategy has been tested on the aniline synthesis plant being in the process of removal. As a result, a flow of 10 wt. %, subjected to decontamination, was isolated from the total volume of construction and demolition waste (C&D waste). The considered approach allowed using the resource potential of more than 80wt. % of waste and minimizing the disposed waste volume.

  18. Prevention by Design: Construction and Renovation of Health Care Facilities for Patient Safety and Infection Prevention.

    Science.gov (United States)

    Olmsted, Russell N

    2016-09-01

    The built environment supports the safe care of patients in health care facilities. Infection preventionists and health care epidemiologists have expertise in prevention and control of health care-associated infections (HAIs) and assist with designing and constructing facilities to prevent HAIs. However, design elements are often missing from initial concepts. In addition, there is a large body of evidence that implicates construction and renovation as being associated with clusters of HAIs, many of which are life threatening for select patient populations. This article summarizes known risks and prevention strategies within a framework for patient safety.

  19. Construction of material and life science experimental facility under high intensity proton accelerator project

    CERN Document Server

    Ikeda, Y

    2002-01-01

    The outline of construction of 1MW pulse spallation neutron source in the MLF experimental facility is explained in this paper. The object, project activities, project team and construction of group are stated. 1MW pulse nuclear spallation neutron source, neutron source design and technical problems, Hg target, the basic parameters, neutron source station, moderator, reflector, shield, shutter, low temperature system, facility, spectrometer, and neutron experimental device are explained. The nuclear calculation code and nuclear data used as technical support and computer environment are illustrated. (S.Y.)

  20. Environmental Assessment: Hurlburt Field Soundside Boathouse and Restroom Facility Construction

    Science.gov (United States)

    2007-08-01

    during a field investigation conducted May 3, 2005, included the semi- palma ted plover (Charadrius semipalmatus), osprey (Pandion halieatus), and...are not considered ecologically sensitive and are very abundant in the area. Likewise, the Proposed Action is not expected to have any cumulative...John Martin: Project manager and lead environmental scientist responsible for preparing the EA. Mr. Martin has 22 years of experience in ecological

  1. The planning, construction, and operation of a radioactive waste storage facility for an Australian state radiation regulatory authority

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, J.D.; Kleinschmidt, R.; Veevers, P. [Radiation Health, Queensland (Australia)

    1995-12-31

    Radiation regulatory authorities have a responsibility for the management of radioactive waste. This, more often than not, includes the collection and safe storage of radioactive sources in disused radiation devices and devices seized by the regulatory authority following an accident, abandonment or unauthorised use. The public aversion to all things radioactive, regardless of the safety controls, together with the Not In My Back Yard (NIMBY) syndrome combine to make the establishment of a radioactive materials store a near impossible task, despite the fact that such a facility is a fundamental tool for regulatory authorities to provide for the radiation safety of the public. In Queensland the successful completion and operational use of such a storage facility has taken a total of 8 years of concerted effort by the staff of the regulatory authority, the expenditure of over $2 million (AUS) not including regulatory staff costs and the cost of construction of an earlier separate facility. This paper is a summary of the major developments in the planning, construction and eventual operation of the facility including technical and administrative details, together with the lessons learned from the perspective of the overall project.

  2. Using Consultants in the Design, Construction, and Occupancy of New Healthcare Facilities.

    Science.gov (United States)

    Stichler, Jaynelle F

    2015-11-01

    Nurse leaders are critical players in the design, construction, and occupancy of new healthcare facilities or renovation projects. While most hospitals and healthcare systems have internal resources needed to manage large projects, there is often a recognized need for expertise of external consultants during various phases of design and construction. The purpose of this article is to provide an overview of types of external consultants that can be contracted to ensure the success of the project from concept through initial occupancy.

  3. The problems of design and construction of health facilities in Angola

    Directory of Open Access Journals (Sweden)

    Bindanda Antonio Afonso

    2014-03-01

    Full Text Available Angola is a country with great economic potential, which can contribute to the solution of construction, architecture and social problems of the country in case of rational use of financial resources. The author focuses on the negative factors that prevent the health authorities from the efficient construction of large hospitals and clinical facilities in Angola. Brief description of the Angolan population is given. The article provides a brief overview of the climate and overall social health problems. Basing on the stated goals, the following problems are considered: Features of architectural and planning decisions of clinical facilities and a brief description of the existing hospitals. The article deals with those minor progressive changes in planning decisions and in the siting of health facilities. Space-planning decisions, the most rational options and requirements for building new hospitals in Angola. The author indentified the main factors that influence architectural solutions for the design and construction of medical facilities. The most rational design options for clinic hospitals were determined. The objectives of the study were formulated with a view to identifying architectural solutions in the construction of new clinical hospitals. The main objective of the study is to improve health care in Angola. The problems are considered in order to identify rational architectural design of new clinical hospitals.

  4. Construction and operation of replacement hazardous waste handling facility at Lawrence Berkeley Laboratory. Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The US Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0423, for the construction and operation of a replacement hazardous waste handling facility (HWHF) and decontamination of the existing HWHF at Lawrence Berkeley Laboratory (LBL), Berkeley, California. The proposed facility would replace several older buildings and cargo containers currently being used for waste handling activities and consolidate the LBL`s existing waste handling activities in one location. The nature of the waste handling activities and the waste volume and characteristics would not change as a result of construction of the new facility. Based on the analysis in the EA, DOE has determined that the proposed action would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 USC. 4321 et seq. Therefore, an environmental impact statement is not required.

  5. The Langley thermal protection system test facility: A description including design operating boundaries

    Science.gov (United States)

    Klich, G. F.

    1976-01-01

    A description of the Langley thermal protection system test facility is presented. This facility was designed to provide realistic environments and times for testing thermal protection systems proposed for use on high speed vehicles such as the space shuttle. Products from the combustion of methane-air-oxygen mixtures, having a maximum total enthalpy of 10.3 MJ/kg, are used as a test medium. Test panels with maximum dimensions of 61 cm x 91.4 cm are mounted in the side wall of the test region. Static pressures in the test region can range from .005 to .1 atm and calculated equilibrium temperatures of test panels range from 700 K to 1700 K. Test times can be as long as 1800 sec. Some experimental data obtained while using combustion products of methane-air mixtures are compared with theory, and calibration of the facility is being continued to verify calculated values of parameters which are within the design operating boundaries.

  6. 29 CFR 776.30 - Construction performed on temporarily idle facilities.

    Science.gov (United States)

    2010-07-01

    ... that the repair or maintenance of a covered facility (including its machinery, tools, dies, and other... Bodden v. McCormick Shipping Corp., 188 F. (2d) 733. 54 Maneja v. Waialua Agricultural Co., 349 U.S....

  7. The Construction of the Fast Resistive Bolometer for a SXR Measurement on the GIT-12 Facility

    Directory of Open Access Journals (Sweden)

    Jakub Cikhardt

    2013-01-01

    Full Text Available A lot of kinds of instruments are used for the SXR measurement at pulsed power facilities, but most of them are difficult to calibrate absolutely. For the determination of the energy of SXR radiated by the discharge on Z-pinches, it is possible to use the bolometer which can be calibrated analytically. The bolometer can be constructed with the sufficient sensitivity and, at the same time, with the time resolution in the order of nanoseconds. This bolometer was designed and constructed for the measurement on the 5MA facility GIT-12 at the Institute of High Current Electronics (IHCE of the Siberian Branch Russian Academy of Sciences in Tomsk. The experiments on GIT-12 with the neon and deuterium gas-puff load were diagnosed by the copper bolometer with the time resolution of 4 ns and the sensitivity of 12 V cm2 J-1.

  8. Application of Nuclear Regulatory Commission Regulation Equivalency to Construction of New Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    BISHOP, G.E.

    1999-06-02

    The Spent Nuclear Fuels Project (SNFP) Office of the Department of Energy (DOE), Richland Operations Office, is charged with moving 2.100 metric tons of spent nuclear fuel elements left over from plutonium production into semi-permanent storage at DOE'S Hanford site in Washington state. In anticipation of eventual NRC regulation, the DOE decided to impose NRC requirements on new SNFP facility design and construction, specifically for the Cold Vacuum Drying Facility (CVDF) and the Canister Storage Building (CSB). The SNFP implemented this policy of ''NRC equivalency'' with the goal of achieving a level of nuclear safety equivalent to that of NRC-licensed fuel processing facilities. Appropriate features of the NRC licensing process were adopted. However, the SNFP maintained applicable DOE requirements in tandem with the NRC regulations. Project work is continuing, with the first fuel movement scheduled for November, 2000.

  9. General design, construction, and operation guidelines: Constructed wetlands wastewater treatment systems for small users including individual residences. Second edition

    Energy Technology Data Exchange (ETDEWEB)

    Steiner, G.R.; Watson, J.T.

    1993-05-01

    One of the Tennessee Valley Authority`s (TVA`s) major goals is cleanup and protection of the waters of the Tennessee River system. Although great strides have been made, point source and nonpoint source pollution still affect the surface water and groundwater quality in the Tennessee Valley and nationally. Causes of this pollution are poorly operating wastewater treatment systems or the lack of them. Practical solutions are needed, and there is great interest and desire to abate water pollution with effective, simple, reliable and affordable wastewater treatment processes. In recognition of this need, TVA began demonstration of the constructed wetlands technology in 1986 as an alternative to conventional, mechanical processes, especially for small communities. Constructed wetlands can be downsized from municipal systems to small systems, such as for schools, camps and even individual homes.

  10. Technical documentation in support of the project-specific analysis for construction and operation of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, M.A.; Vinikour, W. [Argonne National Lab., IL (United States). Environmental Assessment Div.; Allison, T. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.] [and others

    1996-09-01

    This document provides information that supports or supplements the data and impact analyses presented in the National Ignition Facility (NIF) Project-Specific Analysis (PSA). The purposes of NIF are to achieve fusion ignition in the laboratory for the first time with inertial confinement fusion (ICF) technology and to conduct high- energy-density experiments ins support of national security and civilian application. NIF is an important element in the DOE`s science-based SSM Program, a key mission of which is to ensure the reliability of the nation`s enduring stockpile of nuclear weapons. NIF would also advance the knowledge of basic and applied high-energy- density science and bring the nation a large step closer to developing fusion energy for civilian use. The NIF PSA includes evaluations of the potential environmental impacts of constructing and operating the facility at one of five candidate site and for two design options.

  11. Nonradioactive air emissions notice of construction for the Waste Receiving And Processing facility

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-01

    The mission of the Waste Receiving And Processing (WRAP) Module 1 facility (also referred to as WRAP 1) is to examine assay, characterize, treat, and repackage solid radioactive and mixed waste to enable permanent disposal of the wastes in accordance with all applicable regulations. WRAP 1 will contain equipment and facilities necessary for non-destructive examination (NDE) of wastes and to perform a non-destructive examination assay (NDA) of the total radionuclide content of the wastes, without opening the outer container (e.g., 55-gal drum). WRAP 1 will also be equipped to open drums which do not meet waste acceptance and shipping criteria, and to perform limited physical treatment of the wastes to ensure that storage, shipping, and disposal criteria are met. The solid wastes to be handled in the WRAP 1 facility include low level waste (LLW), transuranic (TRU) waste, and transuranic and low level mixed wastes (LLMW). The WRAP 1 facility will only accept contact handler (CH) waste containers. A Best Available Control Technology for Toxics (TBACT) assessment has been completed for the WRAP 1 facility (WHC 1993). Because toxic emissions from the WRAP 1 facility are sufficiently low and do not pose any health or safety concerns to the public, no controls for volatile organic compounds (VOCs), and installation of HEPA filters for particulates satisfy TBACT for the facility.

  12. Construction of a Post-Irradiated Fuel Examination Shielded Enclosure Facility

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Lehto, Ph.D.; Boyd D. Christensen

    2008-05-01

    construction activities, which will include facility modifications and construction of one shielded enclosure. Follow-up activities will be to construct two additional shielded enclosures to complete the suite of three separate but connected remote operated examination areas. Equipment purchases are to be capital procurement spread out over several years on a funded schedule. This paper discusses safety and operational considerations given during the conceptual design phase of the project. The paper considers such things as project material at risk (MAR), new processes and equipment, potential hazards, and the major modification evaluation process to determine if a preliminary Documented Safety Analysis (PDSA) is required. As part of that process, an evaluation was made of the potential hazards with the new project compared to the existing and historical work and associated hazards in the affected facility.

  13. Construction of action for heterotic string field theory including the Ramond sector

    Science.gov (United States)

    Goto, Keiyu; Kunitomo, Hiroshi

    2016-12-01

    Extending the formulation for open superstring field theory given in arXiv:1508.00366, we attempt to construct a complete action for heterotic string field theory. The action is non-polynomial in the Ramond string field Ψ, and we construct it order by order in Ψ. Using a dual formulation in which the role of η and Q is exchanged, the action is explicitly obtained at the quadratic and quartic order in Ψ with the gauge transformations.

  14. Construction of action for heterotic string field theory including the Ramond sector

    CERN Document Server

    Goto, Keiyu

    2016-01-01

    Extending the formulation for open superstring field theory given in arXiv:1508.00366, we attempt to construct a complete action for heterotic string field theory. The action is non-polynomial in the Ramond string field Psi, and we construct it order by order in Psi. Using a dual formulation in which the role of eta and Q is exchanged, the action is explicitly obtained at the quadratic and quartic order in Psi with the gauge transformations.

  15. SUBSTANTIATION OF THE COST OF HOUSING CONSTRUCTION INCLUDING THE FACTOR OF INVESTMENT ATTRACTIVENESS OF TERRITORIES

    Directory of Open Access Journals (Sweden)

    ZAIATS Yi. I.

    2015-11-01

    Full Text Available Problem statement. For planning and organization of urban construction is necessary to analyze the use of areas. Territorial resources of the city, being used for construction and other urban purposes, consists of plots of land: disposable, reserved and undeveloped in previous years of construction in progress; residential districts and blocks of obsolete housing fund; industrial and municipal and warehouse enterprises being used irrationally or stopped to work; the defence department, where the amortized warehouses and other main funds are that are not used by purpose; agricultural enterprises where the obsolete industrial funds, haying, nurseries, greenhouses. The number of free areas suitable for future urban development is extremely limited. However a considerable part of the territories of almost all functional zones is used inefficiently. Purpose. Formalization of a factor of investment attractiveness of territories for the further identification and research of the connection between it and the cost of housing construction is necessary. Conclusion. The identification of regularities of influence of the factor of investment attractiveness of territories on the cost of construction of high-rise buildings allow to obtain a quantitative estimate of this effect and can be used in the development of the methodology of substantiation of the expediency and effectiveness of the implementation of highrise construction projects, based on organizational and technological aspects.

  16. Issues related to the construction and operation of a geological disposal facility for nuclear fuel waste in crystalline rock - the Canadian experience

    Energy Technology Data Exchange (ETDEWEB)

    Allan, C.J.; Baumgartner, P.; Ohta, M.M.; Simmons, G.R.; Whitaker, S.H. [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs

    1997-12-31

    This paper covers the overview of the Canadian nuclear fuel waste management program, the general approach to the siting, design, construction, operation and closure of a geological disposal facility, the implementing disposal, and the public involvement in implementing geological disposal of nuclear fuel waste. And two appendices are included. 45 refs., 5 tabs., 10 figs.

  17. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Pechmann, J.H.K.; Scott, D.E.; McGregor, J.H.; Estes, R.A.; Chazal, A.C.

    1993-02-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980's. The Savannah River Ecology Laboratory (SREL) has completed 12 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of refuge ponds'' as alternative breeding sites for amphibians that formerly bred at Sun Bay Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10CFR1022).

  18. Advances in technology for the construction of deep-underground facilities

    Energy Technology Data Exchange (ETDEWEB)

    1987-12-31

    The workshop was organized in order to address technological issues important to decisions regarding the feasibility of strategic options. The objectives of the workshop were to establish the current technological capabilities for deep-underground construction, to project those capabilities through the compressed schedule proposed for construction, and to identify promising directions for timely allocation of existing research and development resources. The earth has been used as a means of protection and safekeeping for many centuries. Recently, the thickness of the earth cover required for this purpose has been extended to the 2,000- to 3,000-ft range in structures contemplated for nuclear-waste disposal, energy storage, and strategic systems. For defensive missile basing, it is now perceived that the magnitude of the threat has increased through better delivery systems, larger payloads, and variable tactics of attack. Thus, depths of 3,000 to 8,000 ft are being considered seriously for such facilities. Moreover, it appears desirable that the facilities be operational (if not totally complete) for defensive purposes within a five-year construction schedule. Deep excavations such as mines are similar in many respects to nearsurface tunnels and caverns for transit, rail, sewer, water, hydroelectric, and highway projects. But the differences that do exist are significant. Major distinctions between shallow and deep construction derive from the stress fields and behavior of earth materials around the openings. Different methodologies are required to accommodate other variations resulting from increased depth, such as elevated temperatures, reduced capability for site exploration, and limited access during project execution. This report addresses these and other questions devoted to geotechnical characterization, design, construction, and excavation equipment.

  19. Construction and characterization of the redesigned PGAA facility at The University of Texas at Austin

    Energy Technology Data Exchange (ETDEWEB)

    Revay, Zs. [Institute of Isotopes, Hungarian Academy of Sciences, Budapest (Hungary)]. E-mail: revay@iki.kfki.hu; Harrison, R.K. [Nuclear Engineering Teaching Laboratory, The University of Texas at Austin (United States); Alvarez, E. [Nuclear Engineering Teaching Laboratory, The University of Texas at Austin (United States); Biegalski, S.R. [Nuclear Engineering Teaching Laboratory, The University of Texas at Austin (United States); Landsberger, S. [Nuclear Engineering Teaching Laboratory, The University of Texas at Austin (United States)

    2007-07-11

    The prompt gamma activation analysis (PGAA) facility at The University of Texas at Austin (UT) has been redesigned and reconstructed. As a result of the new shielding of the system, the neutron (at all energies) and gamma-ray backgrounds have been reduced by more than an order of magnitude, considerably improving the signal-to-noise ratio for the characteristic peaks. The prompt gamma peaks from the construction materials have also been decreased, providing better detection limits for elements. The calibration of the new system is shown in detail. All these efforts significantly improved the sensitivity and reliability of the chemical analyses performed in the facility. The characteristics of the improved PGAA system are also presented.

  20. Construction of the SCRIT electron scattering facility at the RIKEN RI Beam Factory

    Science.gov (United States)

    Wakasugi, M.; Ohnishi, T.; Wang, S.; Miyashita, Y.; Adachi, T.; Amagai, T.; Enokizono, A.; Enomoto, A.; Haraguchi, Y.; Hara, M.; Hori, T.; Ichikawa, S.; Kikuchi, T.; Kitazawa, R.; Koizumi, K.; Kurita, K.; Miyamoto, T.; Ogawara, R.; Shimakura, Y.; Takehara, H.; Tamae, T.; Tamaki, S.; Togasaki, M.; Yamaguchi, T.; Yanagi, K.; Suda, T.

    2013-12-01

    The SCRIT electron scattering facility, aiming at electron scattering off short-lived unstable nuclei, has been constructed at the RIKEN RI Beam Factory. This facility consists of a racetrack microtron (RTM), an electron storage ring (SR2) equipped with the SCRIT system, and a low-energy RI separator (ERIS). SCRIT (self-confining radioactive isotope ion targeting) is a novel technique to form internal targets in an electron storage ring. Experiments for evaluating performance of the SCRIT system have been carried out using the stable 133Cs1+ beam and the 132Xe1+ beam supplied from ERIS. Target ions were successfully trapped in the SCRIT system with 90% efficiency at a 250 mA electron beam current, and luminosity exceeding 1026/(cm2 s) was maintained for more than 1 s. Electrons elastically scattered from the target ions were successfully measured. Applicability of the SCRIT system to electron scattering for unstable nuclei has been established in experiments.

  1. Design and construction of a photobioreactor for hydrogen production, including status in the field.

    Science.gov (United States)

    Skjånes, Kari; Andersen, Uno; Heidorn, Thorsten; Borgvang, Stig A

    Several species of microalgae and phototrophic bacteria are able to produce hydrogen under certain conditions. A range of different photobioreactor systems have been used by different research groups for lab-scale hydrogen production experiments, and some few attempts have been made to upscale the hydrogen production process. Even though a photobioreactor system for hydrogen production does require special construction properties (e.g., hydrogen tight, mixing by other means than bubbling with air), only very few attempts have been made to design photobioreactors specifically for the purpose of hydrogen production. We have constructed a flat panel photobioreactor system that can be used in two modes: either for the cultivation of phototrophic microorganisms (upright and bubbling) or for the production of hydrogen or other anaerobic products (mixing by "rocking motion"). Special emphasis has been taken to avoid any hydrogen leakages, both by means of constructional and material choices. The flat plate photobioreactor system is controlled by a custom-built control system that can log and control temperature, pH, and optical density and additionally log the amount of produced gas and dissolved oxygen concentration. This paper summarizes the status in the field of photobioreactors for hydrogen production and describes in detail the design and construction of a purpose-built flat panel photobioreactor system, optimized for hydrogen production in terms of structural functionality, durability, performance, and selection of materials. The motivations for the choices made during the design process and advantages/disadvantages of previous designs are discussed.

  2. Coastal Changes due to the Construction of Artificial Harbour Entrances and Practical Solutions, including Beach Replenishment

    NARCIS (Netherlands)

    Bijker, E.W.; Van der Leijé, J.P.; Pilon, J.J.; Svasek, J.N.; In 't Veld, J.K.; Verhagen, H.J.

    1981-01-01

    When longshore sediment transport is interrupted by a construction along a coast, e.g harbour moles or a dredged approach channel, the equilibrium of the coastline may be disturbed. When the disruption is caused by breakwaters, the longshore transport that is held back will cause accretion updrift o

  3. Trying to Include but Supporting Exclusion Instead? Constructing the Roma in Slovak Educational Policies

    Science.gov (United States)

    Miškolci, Jozef; Kovácová, Lucia; Kubánová, Martina

    2017-01-01

    Based on a social constructivist theoretical framework, this research study examines how the design of proinclusive educational policies and the general public construct the Roma students and parents in Slovakia. For this purpose, data from two selected educational policies and five focus groups conducted in five regions in Slovakia were analyzed.…

  4. 42 CFR 137.329 - What environmental considerations must be included in the construction project agreement?

    Science.gov (United States)

    2010-10-01

    ... SELF-GOVERNANCE Construction Project Assumption Process § 137.329 What environmental considerations....311. (c) Identification of the environmental review procedures adopted by the Self-Governance Tribe... environmental determination in accordance with the Self-Governance Tribe's adopted procedures....

  5. Radiation control aspects of the civil construction for a high power free electron laser (FEL) facility

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, T.; Neil, G.; Stapleton, G.

    1996-12-31

    The paper discusses some of the assumptions and methods employed for the control of ionizing radiation in the specifications for the civil construction of a planned free electron laser facility based on a 200 MeV, 5 mA superconducting recirculation electron accelerator. Consideration is given firstly to the way in which the underlying building configuration and siting aspects were optimized on the basis of the early assumptions of beam loss and radiation goals. The various design requirements for radiation protection are then considered, and how they were folded into an aesthetically pleasing and functional building.

  6. A facile hydrothermal approach for construction of carbon coating on TiO2 nanoparticles

    OpenAIRE

    Olurode, Kehinde; Neelgund, Gururaj M.; Oki, Aderemi; Luo, Zhiphing

    2011-01-01

    Herein a facile hydrothermal approach is used to construct carbon coated TiO2 nanoparticles employing dextrose as the source of carbon. The procedure is operated at a low temperature of 200 °C. Fourier infrared spectroscopy demonstrated the successful coating of carbon on TiO2 nanoparticles. The phase composition of TiO2 and carbon coated TiO2 nanoparticles were studied using X-ray diffraction and the surface morphology was analyzed by scanning and transmission electron microscopy. The existe...

  7. Construction and commissioning of the PETRA pilot plant facility for waste management studies

    Energy Technology Data Exchange (ETDEWEB)

    Dworschak, H.; Girardi, F.; Grossi, G.

    1989-10-01

    This paper describes the PETRA hot cell facility currently undergoing commissioning test at the Joint Research Centre-Ispra Establishment (Italy) and illustrated the possibilities and objectives of experimental work that can be carried out in the field of radioactive waste management. The facility includes the typical HA-processing steps of nuclear fuel reprocessing, i.e. dissolution, filtration, co-decontamination with on-line solvent regeneration for the production of significant quantities of medium and high-level solid and liquid wastes. These wastes will be used primarily for optimization, verification and demonstration studies at full radioactivity levels in relation to the safety and reliability of waste confinement and disposal concepts. The facility operates on fuel batches of 6 kg low enriched U equivalent, in a sequential processing mode. The waste streams can be treated by further extraction, concentration, precipitation, denitration and vitrification either as a whole or as separate fractions.

  8. Environmental assessment: Proposed construction of Refuge operational facilities, water management facilities, wildlife oriented interpretation/recreation development, road and water management facilities rehabilitation, and implementation of a vegetation control plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The proposed action consists of the construction of facilities for refuge operation, water management, and wildlife-oriented interpretation and recreation; the...

  9. SINBAD—The accelerator R&D facility under construction at DESY

    Energy Technology Data Exchange (ETDEWEB)

    Dorda, U., E-mail: ulrich.dorda@desy.de [DESY, Hamburg & Zeuthen (Germany); Assmann, R.; Brinkmann, R.; Flöttmann, K.; Hartl, I.; Hüning, M.; Kärtner, F.; Fallahi, A.; Marchetti, B.; Nie, Y.; Osterhoff, J.; Schlarb, H.; Zhu, J. [DESY, Hamburg & Zeuthen (Germany); Maier, A.R. [University Hamburg (Germany)

    2016-09-01

    The SINBAD facility (Short INnovative Bunches and Accelerators at DESY) is a long-term dedicated accelerator research and development facility currently under construction at DESY. It will be located in the premises of the old DORIS accelerator complex and host multiple independent experiments cost-effectively accessing the same central infrastructure like a central high power laser. With the removal of the old DORIS accelerator being completed, the refurbishment of the technical infrastructure is currently starting up. The presently ongoing conversion of the area into the SINBAD facility and the currently foreseen layout is described. The first experiment will use a compact S-band linac for the production of ultra-short bunches at hundred MeV. Once established, one of the main usages will be to externally inject electrons into a laser-driven plasma wakefield accelerator to boost the energy to GeV-level while maintaining a usable beam quality, ultimately aiming to drive an FEL. The second experiment already under planning is the setup of an attosecond radiation source with advanced technology. Further usage of the available space and infrastructure is revised and national and international collaborations are being established.

  10. SINBAD-The accelerator R&D facility under construction at DESY

    Science.gov (United States)

    Dorda, U.; Assmann, R.; Brinkmann, R.; Flöttmann, K.; Hartl, I.; Hüning, M.; Kärtner, F.; Fallahi, A.; Marchetti, B.; Nie, Y.; Osterhoff, J.; Schlarb, H.; Zhu, J.; Maier, A. R.

    2016-09-01

    The SINBAD facility (Short INnovative Bunches and Accelerators at DESY) is a long-term dedicated accelerator research and development facility currently under construction at DESY. It will be located in the premises of the old DORIS accelerator complex and host multiple independent experiments cost-effectively accessing the same central infrastructure like a central high power laser. With the removal of the old DORIS accelerator being completed, the refurbishment of the technical infrastructure is currently starting up. The presently ongoing conversion of the area into the SINBAD facility and the currently foreseen layout is described. The first experiment will use a compact S-band linac for the production of ultra-short bunches at hundred MeV. Once established, one of the main usages will be to externally inject electrons into a laser-driven plasma wakefield accelerator to boost the energy to GeV-level while maintaining a usable beam quality, ultimately aiming to drive an FEL. The second experiment already under planning is the setup of an attosecond radiation source with advanced technology. Further usage of the available space and infrastructure is revised and national and international collaborations are being established.

  11. Radioactive Air Emmission Notice of Construction (NOC) for the Waste Receiving and Processing Facility (WRAP)

    Energy Technology Data Exchange (ETDEWEB)

    MENARD, N.M.

    2000-12-01

    This document serves as a notice of construction (NOC) pursuant to the requirements of Washington Administrative Code (WAC) 246-247-060, and as a request for approval to modify pursuant to 40 Code of Federal Regulations (CFR) 61.07 for the Waste Receiving and Processing (WRAP) Facility. The rewrite of this NOC incorporates all the approved revisions (Sections 5.0, 6.0, 8.0, and 9.0), a revised potential to emit (PTE) based on the revised maximally exposed individual (MEI) (Sections 8.0, 10.0, 11.0, 12.0, 13.0, 14.0, and 15.0), the results of a study on fugitive emissions (Sections 6.0, 10.0, and 15.0), and reflects the current operating conditions at the WRAP Facility (Section 5.0). This NOC replaces DOE/RL-93-15 and DOE/RL-93-16 in their entirety. The primary function of the WRAP Facility is to examine, assay, characterize, treat, verify, and repackage radioactive material and mixed waste. There are two sources of emissions from the WRAP Facility: stack emissions and fugitive emissions. The stack emissions have an unabated total effective dose equivalent (TEDE) estimate to the hypothetical offsite MEI of 1.13 E+02 millirem per year. The abated TEDE for the stack emissions is estimated at 5.63 E-02 millirem per year to the MEI. The fugitive emissions have an unabated TEDE estimate to the hypothetical offsite MEI of 5.87 E-04. There is no abatement for the fugitive emissions.

  12. Environmental assessment for the construction and operation of waste storage facilities at the Paducah Gaseous Diffusion Plant, Paducah, Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    DOE is proposing to construct and operate 3 waste storage facilities (one 42,000 ft{sup 2} waste storage facility for RCRA waste, one 42,000 ft{sup 2} waste storage facility for toxic waste (TSCA), and one 200,000 ft{sup 2} mixed (hazardous/radioactive) waste storage facility) at Paducah. This environmental assessment compares impacts of this proposed action with those of continuing present practices aof of using alternative locations. It is found that the construction, operation, and ultimate closure of the proposed waste storage facilities would not significantly affect the quality of the human environment within the meaning of NEPA; therefore an environmental impact statement is not required.

  13. 48 CFR 852.236-83 - Payments under fixed-price construction contracts (including NAS).

    Science.gov (United States)

    2010-10-01

    ... (CPM) network. (4) The CPM network shall include a separate cost loaded activity for adjusting and... shall show on the critical path method (CPM) network the total cost of the guarantee period services in... contracting officer. The activity on the CPM shall have money only and not activity time. (ii) The...

  14. Construction of the SCRIT electron scattering facility at the RIKEN RI Beam Factory

    Energy Technology Data Exchange (ETDEWEB)

    Wakasugi, M., E-mail: wakasugi@riken.jp [RIKEN Nishina Center for Accelerator Based Science, 2-1 Hirosawa,Wako, Saitama 351-0198 (Japan); Ohnishi, T. [RIKEN Nishina Center for Accelerator Based Science, 2-1 Hirosawa,Wako, Saitama 351-0198 (Japan); Wang, S. [Research Center for Electron Photon Science, Tohoku University, 1-2-1 Mikamine, Taihakuku, Sendai, Miyagi 982-0826 (Japan); Miyashita, Y. [RIKEN Nishina Center for Accelerator Based Science, 2-1 Hirosawa,Wako, Saitama 351-0198 (Japan); Adachi, T.; Amagai, T. [Research Center for Electron Photon Science, Tohoku University, 1-2-1 Mikamine, Taihakuku, Sendai, Miyagi 982-0826 (Japan); Enokizono, A. [Department of Physics, Rikkyo University, 3-34-1 Nishiikebukuro, Toshimaku, Tokyo 171-8501 (Japan); Enomoto, A. [Department of Physics, Saitama University, Urawa, Saitama 338-8570 (Japan); Haraguchi, Y. [Department of Electrical Engineering, Nagaoka University of Technology, 1603-1 Kamitomiokamachi, Nagaoka, Niigata 940-2188 (Japan); Hara, M.; Hori, T.; Ichikawa, S. [RIKEN Nishina Center for Accelerator Based Science, 2-1 Hirosawa,Wako, Saitama 351-0198 (Japan); Kikuchi, T. [Department of Electrical Engineering, Nagaoka University of Technology, 1603-1 Kamitomiokamachi, Nagaoka, Niigata 940-2188 (Japan); Kitazawa, R. [Research Center for Electron Photon Science, Tohoku University, 1-2-1 Mikamine, Taihakuku, Sendai, Miyagi 982-0826 (Japan); Koizumi, K.; Kurita, K. [Department of Physics, Rikkyo University, 3-34-1 Nishiikebukuro, Toshimaku, Tokyo 171-8501 (Japan); Miyamoto, T. [Research Center for Electron Photon Science, Tohoku University, 1-2-1 Mikamine, Taihakuku, Sendai, Miyagi 982-0826 (Japan); Ogawara, R.; Shimakura, Y. [Department of Physics, Rikkyo University, 3-34-1 Nishiikebukuro, Toshimaku, Tokyo 171-8501 (Japan); Takehara, H. [Department of Electrical Engineering, Nagaoka University of Technology, 1603-1 Kamitomiokamachi, Nagaoka, Niigata 940-2188 (Japan); and others

    2013-12-15

    The SCRIT electron scattering facility, aiming at electron scattering off short-lived unstable nuclei, has been constructed at the RIKEN RI Beam Factory. This facility consists of a racetrack microtron (RTM), an electron storage ring (SR2) equipped with the SCRIT system, and a low-energy RI separator (ERIS). SCRIT (self-confining radioactive isotope ion targeting) is a novel technique to form internal targets in an electron storage ring. Experiments for evaluating performance of the SCRIT system have been carried out using the stable {sup 133}Cs{sup 1+} beam and the {sup 132}Xe{sup 1+} beam supplied from ERIS. Target ions were successfully trapped in the SCRIT system with 90% efficiency at a 250 mA electron beam current, and luminosity exceeding 10{sup 26}/(cm{sup 2} s) was maintained for more than 1 s. Electrons elastically scattered from the target ions were successfully measured. Applicability of the SCRIT system to electron scattering for unstable nuclei has been established in experiments.

  15. Development and construction of a comprehensive set of research diagnostics for the FLARE user facility

    Science.gov (United States)

    Yoo, Jongsoo; Jara-Almonte, J.; Majeski, S.; Frank, S.; Ji, H.; Yamada, M.

    2016-10-01

    FLARE (Facility for Laboratory Reconnection Experiments) will be operated as a flexible user facility, and so a complete set of research diagnostics is under development, including magnetic probe arrays, Langmuir probes, Mach probes, spectroscopic probes, and a laser interferometer. In order to accommodate the various requirements of users, large-scale (1 m), variable resolution (0.5-4 cm) magnetic probes have been designed, and are currently being prototyped. Moreover, a fully fiber-coupled laser interferometer has been designed to measure the line-integrated electron density. This fiber-coupled interferometer system will reduce the complexity of alignment processes and minimize maintenance of the system. Finally, improvements to the electrostatic probes and spectroscopic probes currently used in the Magnetic Reconnection Experiment (MRX) are discussed. The specifications of other subsystems, such as integrators and digitizers, are also presented. This work is supported by DoE Contract No. DE-AC0209CH11466.

  16. Final Environmental Assessment for the Construction of a Temporary Lodging Facility, Eglin Air Force Base, FL

    Science.gov (United States)

    2012-03-01

    including longleaf pine , would be minimized to the degree feasible. No sensitive species have been documented at any of the alternative sites...will be designed to minimize the loss of trees, particularly longleaf pines . • A gopher tortoise survey is required before construction activities...of trees, including longleaf pine , would be minimized to the degree feasible. No sensitive species have been documented at the site. There

  17. 25 CFR 1000.240 - What construction programs included in an AFA are subject to this subpart?

    Science.gov (United States)

    2010-04-01

    ..., coordination, responsibility for the construction project, day-to-day on-site management on site-management and administration of the project, which may include cost management, project budgeting, project scheduling and... to this subpart? 1000.240 Section 1000.240 Indians OFFICE OF THE ASSISTANT SECRETARY, INDIAN AFFAIRS...

  18. Heavy metals in recovered fines from construction and demolition debris recycling facilities in Florida.

    Science.gov (United States)

    Townsend, Timothy; Tolaymat, Thabet; Leo, Kevin; Jambeck, Jenna

    2004-10-01

    A major product recovered from the processing and recycling of construction and demolition (C&D) debris is screened soil, also referred to as fines. A proposed reuse option for C&D debris fines is fill material, typically in construction projects as a substitute for natural soil. Waste material that is reused in a manner similar to soil must first be characterized to examine potential risks to human health and the environment. In Florida, samples of C&D debris fines from 13 C&D debris recycling facilities were characterized for 11 total and leachable heavy metal concentrations. Total metal concentration results (mg/kg) were compared to existing data on background Florida soil concentrations and to Florida's risk-based soil cleanup target levels (SCTLs). All of the detected metals were found to be elevated with respect to background. The 95% upper confidence level of arsenic from 99 samples was 3.2 mg/kg; arsenic presented the greatest limitation to reuse when compared to the SCTLs. Lead was not found to pose a major problem, likely because of the relatively new building infrastructure in Florida, which results in less demolition debris and less material impacted by lead-based paint. The results of batch leaching tests conducted using simulated rainwater (mg/l) were compared directly to risk-based groundwater levels for Florida and were found not to pose a risk using existing risk assessment policies.

  19. Clean Construction Protocol for the National Ignition Facility Beampath and Utilities

    Energy Technology Data Exchange (ETDEWEB)

    Predmore, R A; VanDoren, D E; Stowers, I F; Stephenson, S A

    2002-01-04

    When the stadium-size, National Ignition Facility (NIF) is fully operational at the Lawrence Livermore National Laboratory (LLNL), its 192 laser beams will deliver 1.8 megajoules (500 terawatts) of energy onto a target to create extremely high temperatures and pressures for inertial confinement fusion research. Due to the high-energy-physics requirements of the NIF optical components, the optics and their surrounding beampath as well as the supporting utility systems must be fabricated, cleaned, assembled, and commissioned for precision cleanliness. This paper will provide an overview of the NIF cleanliness requirements, the clean construction protocol (CCP) specifications for the beampath and clean utilities, and techniques for verifying the CCP specifications. The NIF cleanliness requirements define limits for molecular and particulate contamination; the goal of these limits is to prevent contamination of the optical components. To prevent laser-induced damage and poor laser quality in the optical components, requirements for cleaning, assembly, installation, and commissioning in terms of particle and nonvolatile residue (NVR) levels are defined. The requirements in the interior of the beampath are parts-per-billion airborne molecular contamination (AMC) and Class 1 particulate levels. To achieve the cleanliness requirements for the beampath interior, a graded CCP approach is used as the NIF beampath and utilities are being constructed by a partnership between LLNL and the construction contractor, Jacobs Facilities, Inc. in a stadium-size Class 100,000 building. Installation of the beampath components utilizes localized mini-environments of Class 100 or better, with budgets of cleanliness exposure or ''class-hours'' for each clean connection. Garment, equipment, and operational considerations are evaluated with process verification. Verification of the beampath and utility cleanliness is performed with cleanliness exposure monitoring

  20. Measurements of nuclear data and possibility to construct the nuclear data production facility based on electron linac

    Energy Technology Data Exchange (ETDEWEB)

    Namkung, Won; Ko, In Soo; Cho, Moo Hyun; Kim, Gui Nyun; Lee, Young Seok; Kang, Heung Sik [Pohang University of Science and Technology, Pohang(Korea)

    2001-04-01

    In order to construct an infrastructure to produce nuclear data, we studied three main items; (1) Study on the possibility to construct a facility for nuclear data production, (2) Production of nuclear data for nuclear power plant, and (3) Pulsed neutron source based on a 100-MeV electron linac at Pohang Accelerator Laboratory (PAL). We confirmed the possibility to build a nuclear data production facility utilizing a 100-MeV electron linac at PAL and manpower who wanted to participate the nuclear data production experiments. In order to measure the nuclear data for nuclear power plant, we used several nuclear data production facilities in abroad. We measured total cross sections and neutron caprure cross sections for {sup nat}Dy and {sup nat}Hf using the pulsed neutron facility in the Research Reactor Institute, Kyoto University (KURRI). The neutron capture cross sections for {sup 161,162,163,164}Dy were measured at KURRI in the neutron energy region between 0.001 eV and several tens keV, and at the fast neutron facility in Tokyo Institute of Technology in the neutron energy region between 10 keV and 100 keV. We also measured the neutron capture cross sections and gamma multiplicity of {sup 232}Th at the IBR30 in Dubna, Russia. We have construct a pulsed neutron source using a 100-MeV electron linac at PAL. We measured neutron time-of-flight (TOF) spectra in order to check the characteristics of the pulsed neutron source. We also measured a neutron total cross sections of W and Cu. The pulsed neutron facility can be utilized in the education facility for nuclear data production and the test facility for the R and D purpose of the nuclear data production facility. 29 refs., 57 figs., 22 tabs. (Author)

  1. Thermal-vacuum facility with in-situ mechanical loading. [for testing space construction materials

    Science.gov (United States)

    Tennyson, R. C.; Hansen, J. S.; Holzer, R. P.; Uffen, B.; Mabson, G.

    1978-01-01

    The paper describes a thermal-vacuum space simulator used to assess property changes of fiber-reinforced polymer composite systems. The facility can achieve a vacuum of approximately .0000001 torr with temperatures ranging from -200 to +300 F. Some preliminary experimental results are presented for materials subjected to thermal loading up to 200 F. The tests conducted include the evaluation of matrix modulus and strength, coefficients of thermal expansion, and fracture toughness. Though the experimental program is at an early stage, the data appear to indicate that these parameters are influenced by hard vacuum.

  2. ISABELLE: a proton-proton colliding beam facility. [Proposal for the construction of ISABELLE

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-04-01

    A proposal is presented for the construction of an Intersecting Storage Accelerator, ISABELLE, to be located at Brookhaven National Laboratory. At this major research facility, colliding beams of protons will be produced and studied by particle physicists. This proposal combines the interests of these particle physicists in exploring a new energy regime with the challenge of building a new research instrument. The proposal results from several years of considering such devices in parallel with extensive developmental work. The proposal is divided into several major parts. Following an introduction is an overall summary of the proposal covering its highlights. Part II contains a thorough discussion of the physics objectives that can be addressed by the storage ring. It begins with an explanation of current theoretical concepts that occupy the curiosity of high energy physicists. Then follows a brief discussion of possible experiments that might be assembled at the interaction regions to test these concepts. The third part of the proposal goes into the details of the design of the intersecting storage accelerators. It begins with a description of the entire facility and the design of the magnet ring structure. The processes of proton beam accumulation and acceleration are thoroughly described. The discussion then turns to the design of the components and subsystems for the accelerator. The accelerator elements are described followed by a description of the physical plant. The cost estimate and time scales are displayed in Part IV. Here the estimate has been based on the experience gained from working with the prototype units at the laboratory. The appendices are an important part of the proposal. The parameter list for the 200 x 200 GeV ISABELLE is carefully documented. An example of a possible research program can be found in an appendix. The performance of prototype units is documented in one of the appendices.

  3. A3 Altitude Test Facility

    Science.gov (United States)

    Dulreix, Lionel J.

    2009-01-01

    This slide presentation shows drawings, diagrams and photographs of the A3 Altitude Test Facility. It includes a review of the A3 Facility requirements, and drawings of the various sections of the facility including Engine Deck and Superstructure, Test Cell and Thrust Takeout, Structure and Altitude Support Systems, Chemical Steam generators, and the subscale diffuser. There are also pictures of the construction site, and the facility under construction. A Diagram of the A3 Steam system schematic is also shown

  4. Environmental assessment for the construction, operation, and decommissioning of the Waste Segregation Facility at the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This Environmental Assessment (EA) has been prepared by the Department of Energy (DOE) to assess the potential environmental impacts associated with the construction, operation and decontamination and decommissioning (D&D) of the Waste Segregation Facility (WSF) for the sorting, shredding, and compaction of low-level radioactive waste (LLW) at the Savannah River Site (SRS) located near Aiken, South Carolina. The LLW to be processed consists of two waste streams: legacy waste which is currently stored in E-Area Vaults of SRS and new waste generated from continuing operations. The proposed action is to construct, operate, and D&D a facility to process low-activity job-control and equipment waste for volume reduction. The LLW would be processed to make more efficient use of low-level waste disposal capacity (E-Area Vaults) or to meet the waste acceptance criteria for treatment at the Consolidated Incineration Facility (CIF) at SRS.

  5. Development of inherent technologies for advanced PWR core - A study on the current status and the construction feasibility of critical facilities

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Won Sik; Yang, Hyun Seok [Chosun University, Kwangju (Korea); Kim, Chang Hyo; Shim, Hyung Jin [Seoul National University, Seoul (Korea)

    1999-03-01

    The objective of this study is to examine the appropriateness of constructing critical facilities in our country and to decide a course of constructing them if necessary by surveying the status and utilization of foreign facilities and by investigating the demand for domestic facilities. We investigated the status and the utilization of foreign critical facilities through literature survey and personal visitation. In our judgement, critical facilities are necessary for developing the advanced reactors and fuels which are being studied as parts of the Nuclear R and D Program by MOST. Considering the construction cost and the current state of domestic economy, however, it is unjustifiable to build three different types of critical facilities (the light water, the heavy water, and the fast critical facility). It appears to be reasonable to build a light water critical, considering the construction cost, degree of utilization, and other constraints. (author). 89 refs., 134 figs., 64 tabs.

  6. Effect of animal facility construction on basal hypothalamic-pituitary-adrenal and renin-aldosterone activity in the rat.

    Science.gov (United States)

    Raff, Hershel; Bruder, Eric D; Cullinan, William E; Ziegler, Dana R; Cohen, Eric P

    2011-04-01

    Although loud noise and intense vibration are known to alter the behavior and phenotype of laboratory animals, little is known about the effects of nearby construction. We studied the effect of a nearby construction project on the classic stress hormones ACTH, corticosterone, renin, and aldosterone in rats residing in a barrier animal facility before, for the first 3 months of a construction project, and at 1 month after all construction was completed. During some of the construction, noise and vibrations were not obvious to investigators inside the animal rooms. Body weight matched for age was not altered by nearby construction. During nearby construction, plasma ACTH, corticosterone, and aldosterone were approximately doubled compared with those of pre- and postconstruction levels. Expression of CRH mRNA in the paraventricular nucleus of the hypothalamus, CRH receptor and POMC mRNA in the anterior pituitary, and most mRNAs for steroidogenic genes in the adrenal gland were not significantly changed during construction. We conclude that nearby construction can cause a stress response without long-term effects on hypothalamic-pituitary-adrenal axis gene expression and body weight.

  7. The Economy's Influence on Environmental Sustainability and Energy: Including the Top Ten Facilities Issues. APPA Thought Leaders Series, 2009

    Science.gov (United States)

    Lunday, Elizabeth

    2009-01-01

    Since 2006, the APPA (Association of Higher Education Facilities Officers) Thought Leaders Series has brought together experts in higher education for two days of discussion about the challenges facing colleges and universities in North America. Energy and the environment were the focal points for the 2009 Thought Leaders Symposium, and the result…

  8. Construction safety program for the National Ignition Facility, July 30, 1999 (NIF-0001374-OC)

    Energy Technology Data Exchange (ETDEWEB)

    Benjamin, D W

    1999-07-30

    These rules apply to all LLNL employees, non-LLNL employees (including contract labor, supplemental labor, vendors, personnel matrixed/assigned from other National Laboratories, participating guests, visitors and students) and contractors/subcontractors. The General Rules-Code of Safe Practices shall be used by management to promote accident prevention through indoctrination, safety and health training and on-the-job application. As a condition for contracts award, all contractors and subcontractors and their employees must certify on Form S and H A-l that they have read and understand, or have been briefed and understand, the National Ignition Facility OCIP Project General Rules-Code of Safe Practices. (An interpreter must brief those employees who do not speak or read English fluently.) In addition, all contractors and subcontractors shall adopt a written General Rules-Code of Safe Practices that relates to their operations. The General Rules-Code of Safe Practices must be posted at a conspicuous location at the job site office or be provided to each supervisory employee who shall have it readily available. Copies of the General Rules-Code of Safe Practices can also be included in employee safety pamphlets.

  9. Design and construction of a circulating fluidized bed combustion facility for use in studying the thermal remediation of wastes

    Science.gov (United States)

    Rink, Karl K.; Kozinski, Janusz A.; Lighty, JoAnn S.; Lu, Quing

    1994-08-01

    Fluidized bed combustion systems have been widely applied in the combustion of solid fossil fuels, particularly by the power generation industry. Recently, attention has shifted from the conventional bubbling fluidized bed (BFB) to circulating fluidized bed (CFB) combustion systems. Inherent advantages of CFB combustion such as uniform temperatures, excellent mixing, high combustion efficiencies, and greater fuel flexibility have generated interest in the feasibility of CFB combustion systems applied to the thermal remediation of contaminated soils and sludges. Because it is often difficult to monitor and analyze the combustion phenomena that occurs within a full scale fluidized bed system, the need exists for smaller scale research facilities which permit detailed measurements of temperature, pressure, and chemical specie profiles. This article describes the design, construction, and operation of a pilot-scale fluidized bed facility developed to investigate the thermal remediation characteristics of contaminated soils and sludges. The refractory-lined reactor measures 8 m in height and has an external diameter of 0.6 m. The facility can be operated as a BFB or CFB using a variety of solid fuels including low calorific or high moisture content materials supplemented by natural gas introduced into the fluidized bed through auxiliary fuel injectors. Maximum firing rate of the fluidized bed is approximately 300 kW. Under normal operating conditions, internal wall temperatures are maintained between 1150 and 1350 K over superficial velocities ranging from 0.5 to 4 m/s. Contaminated material can be continuously fed into the fluidized bed or introduced as a single charge at three different locations. The facility is fully instrumented to allow time-resolved measurements of gaseous pollutant species, gas phase temperatures, and internal pressures. The facility has produced reproducible fluidization results which agree well with the work of other researchers. Minimum

  10. 29 CFR 776.26 - Relationship of the construction work to the covered facility.

    Science.gov (United States)

    2010-07-01

    ... OF 1938 Construction Industry Individual Employee Coverage in the Construction Industry § 776.26... commerce or the engagement in commerce. For this reason the erection, maintenance or repair of dwellings...

  11. Post-test thermal-hydraulic analysis of two intermediate LOCA tests at the ROSA facility including uncertainty evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Freixa, J., E-mail: jordi@freixa.net [Paul Scherrer Institut (PSI) 5232 Villigen PSI (Switzerland); Kim, T.-W. [Paul Scherrer Institut (PSI) 5232 Villigen PSI (Switzerland); Manera, A. [University of Michigan, Ann Arbor, MI 48109 (United States)

    2013-11-15

    The OECD/NEA ROSA-2 project aims at addressing thermal-hydraulic safety issues relevant for light water reactors by building up an experimental database at the ROSA Large Scale Test Facility (LSTF). The ROSA facility simulates a PWR Westinghouse design with a four-loop configuration and a nominal power of 3423 MWth. Two intermediate break loss-of-coolant-accident (LOCA) experiments (Tests 1 and 2) have been carried out during 2010. The two tests were analyzed by using the US-NRC TRACE best estimate code, employing the same nodalization previously used for the simulation of small-break LOCA experiments of the ROSA-1 programme. A post-test calculation was performed for each test along with uncertainty analysis providing uncertainty bands for each relevant time trend. Uncertainties in the code modelling capabilities as well as in the initial and boundary conditions were taken into account, following the guidelines and lessons learnt through participation in the OECD/NEA BEMUSE programme. Two different versions of the TRACE code were used in the analysis, providing a qualitatively good prediction of the tests. However, the uncertainty analysis revealed differences between the performances of some models in the two versions. The most relevant parameters of the two experimental tests were falling within the computed uncertainty bands.

  12. Post-test thermal-hydraulic analysis of two intermediate LOCA tests at the ROSA facility including uncertainty evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Freixa, J.; Kim, T-W.; Manera, A. [Paul Scherrer Inst., Villigen (Switzerland)

    2011-07-01

    The OECD/NEA ROSA-2 project aims at addressing thermal-hydraulic safety issues relevant for light water reactors by building up an experimental database at the ROSA Large Scale Test Facility (LSTF). The ROSA facility simulates a PWR Westinghouse design with a four-loop configuration and a nominal power of 3423 MWth. Two intermediate break loss-of-coolant-accident (LOCA) experiments (Test 1 and 2) have been carried out during 2010. The two tests were analyzed by using the US-NRC TRACE best estimate code, employing the same nodalization previously used for the simulation of small-break LOCA experiments of the ROSA-1 program. A post-test calculation was performed for each test along with uncertainty analysis providing uncertainty bands for each relevant time trend. Uncertainties in the code modeling capabilities as well as in the initial and boundary conditions were taken into account, following the guidelines and lessons learnt through participation in the OECD/NEA BEMUSE program. Two different versions of the TRACE code were used in the analysis, providing a qualitatively good prediction of the tests. However, both versions showed deficiencies that need to be addressed. The most relevant parameters of the two experimental tests were falling within the computed uncertainty bands. (author)

  13. A facile approach for the construction of the oxetane ring from 5α-acyloxy-△4(20)-taxoids

    Institute of Scientific and Technical Information of China (English)

    LIU, Rui-Wu; YIN, Da-Li; GUO, Ji-Yu; LIANG, Xiao-Tian

    2000-01-01

    An oxetane ring can be constructed from 5α-acyloxy-△4(20)taxoids. Tne facile intramolecular acyl migration from 5- to 20-postion under slightly basic conditions enabled the const-uction of the oxetane ring in a convenient short cut, whereas the acyl migration from 2- to 20-position left the 2-hydroxyl ~~ble to a later benzoylation. An unexpected five-membered 4-O, 20-O sulfite ring was formed in the attempted construction of the oxetane ring with 5α-trifiate as a leaving group. After the construction of the oxetane ring, treatment with strong base LiHMDS and acetyl chloride gave the expected 4-O-acetate while treatment with acetic anhydride and DMAP gave a 4- O-acetoacetate.

  14. Characterization and remediation of soil prior to construction of an on-site disposal facility at Fernald

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, A.; Jones, G. [Fluor Daniel Fernald, Inc., Cincinnati, OH (United States). Fernald Environmental Management Project; Janke, R. [Dept. of Energy (United States); Nelson, K. [Jacobs Engineering (United States)

    1998-03-01

    During the production years at the Feed Materials Production Center (FMPC), the soil of the site and the surrounding areas was surficially impacted by airborne contamination. The volume of impacted soil is estimated at 2.2 million cubic yards. During site remediation, this contamination will be excavated, characterized, and disposed of. In 1986 the US Environmental Protection Agency (EPA) and the Department of Energy (DOE) entered into a Federal Facility Compliance Agreement (FFCA) covering environmental impacts associated with the FMPC. A site wide Remedial Investigation/Feasibility Study (RI/FS) was initiated pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act, as amended by the Superfund Amendments and Reauthorization Act (CERCLA). The DOE has completed the RI/FS process and has received approval of the final Records of Decision. The name of the facility was changed to the Fernald Environmental Management Project (FEMP) to emphasize the change in mission to environmental restoration. Remedial actions which address similar scopes of work or types of contaminated media have been grouped into remedial projects for the purpose of managing the remediation of the FEMP. The Soil Characterization and Excavation Project (SCEP) will address the remediation of FEMP soils, certain waste units, at- and below-grade material, and will certify attainment of the final remedial limits (FRLs) for the FEMP. The FEMP will be using an on-site facility for low level radioactive waste disposal. The facility will be an above-ground engineered structure constructed of geological material. The area designated for construction of the base of the on-site disposal facility (OSDF) is referred to as the footprint. Contaminated soil within the footprint must be identified and remediated. Excavation of Phase 1, the first of seven remediation areas, is complete.

  15. 75 FR 15389 - No Child Left Behind School Facilities and Construction Negotiated Rulemaking Committee Meeting

    Science.gov (United States)

    2010-03-29

    ... issues; Discussion of report outline; Discussion of formula and approach to new school construction; Refinement of options for catalogue and tentative consensus; Finalization of subcommittees, logistics, next...

  16. 76 FR 2617 - No Child Left Behind School Facilities and Construction Negotiated Rulemaking Committee

    Science.gov (United States)

    2011-01-14

    ...-living (dormitory) situations. The following items will be on the agenda: Review and approve October 2010... renovation repairs and school construction and replacement; Review and discuss dormitory standards...

  17. Construction of BIM-based SMART-ITL Facility Management System

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Woo-Jin; Yi, Sung-Jae; Park, Hyun-Sik; Ryu, Sung-Uk; Bae, Hwang [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Hwang, Sang-Chul; Min, Byung-Eui [DDRsoft Co., Daejeon (Korea, Republic of)

    2015-10-15

    The flow area and volume are scaled down to 1/49. The ratio of the hydraulic diameter is 1/7. Therefore, SMART-ITL is a large-scale thermalhydraulic test facility with about 45 m height, which is consisted of 10 m underground and 35 m from the ground level. Until now, the management of design data and maintenance of large scale test facilities have been managed based on hard-copy information. Recently, Thermal Hydraulics Safety Research Division (THSRD) at Korea Atomic Energy Research Institute (KAERI) has developed Facility Management System (FMS) based Building Information Modeling (BIM) to manage its design data more effectively for these large scale test facilities of SMART-ITL and ATLAS, and this BIM technology has been applied to SMART-ITL at the first. This study proposed a method of effective management and maintenance of design data applied to the SMART-ITL. That is, a FMS was developed based on the BIM technology for SMART-ITL. Figure 2 shows an overview of FMS development process based on BIM technology. SMART-ITL FMS facilitates its management and maintenance more effectively and accurately by 3- dimensional visualization. It enables the shape information of large scale test facilities to be visualized intuitively in a virtual space, and the efficient maintenance of data and instruments is possible by linking 3D shape information.

  18. Design, construction and management of tailings storage facilities for surface disposal in China: case studies of failures.

    Science.gov (United States)

    Wei, Zuoan; Yin, Guangzhi; Wang, J G; Wan, Ling; Li, Guangzhi

    2013-01-01

    Rapid development of China's economy demands for more mineral resources. At the same time, a vast quantity of mine tailings, as the waste byproduct of mining and mineral processing, is being produced in huge proportions. Tailings impoundments play an important role in the practical surface disposal of these large quantities of mining waste. Historically, tailings were relatively small in quantity and had no commercial value, thus little attention was paid to their disposal. The tailings were preferably discharged near the mines and few tailings storage facilities were constructed in mainland China. This situation has significantly changed since 2000, because the Chinese economy is growing rapidly and Chinese regulations and legislation require that tailings disposal systems must be ready before the mining operation begins. Consequently, data up to 2008 shows that more than 12 000 tailings storage facilities have been built in China. This paper reviews the history of tailings disposal in China, discusses three cases of tailings dam failures and explores failure mechanisms, and the procedures commonly used in China for planning, design, construction and management of tailings impoundments. This paper also discusses the current situation, shortcomings and key weaknesses, as well as future development trends for tailings storage facilities in China.

  19. The design, construction, and commissioning of a multi-use cyclotron facility

    Energy Technology Data Exchange (ETDEWEB)

    Ho, S.; Hutcheson, M.; Schick-Martin, D. [Saskatchewan Centre for Cyclotron Sciences, Saskatchewan (Canada); Dalzell, M.; Alexander, N. [Sylvia Fedoruk Canadian Centre for Nuclear Innovation, Saskatoon, Saskatchewan (Canada)

    2015-06-15

    The Sylvia Fedoruk Canadian Centre for Nuclear Innovation in Saskatchewan is in the process of commissioning the Saskatchewan Centre for Cyclotron Sciences that is to be used for both academic research and commercial radiopharmaceutical production. The hybrid nature of this facility comes with unique challenges in satisfying both the rigid demands of pharmaceutical production while providing the necessary flexibility for academic research. In order to meet these competing demands, the Fedoruk Centre has assembled a distinct combination of skill sets and areas of expertise to operate a facility with an interdisciplinary focus. (author)

  20. Tennessee Valley region study: potential year 2000 radiological dose to population resulting from nuclear facility operations. [Includes glossary

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    A companion report, DOE/ET-0064/1, presents a geographic, cultural, and demographic profile of the Tennessee Valley Region study area. This report describes the calculations of radionuclide release and transport and of the resultant dose to the regional population, assuming a projected installed capacity of 220,000 MW in the year 2000, of which 144,000 MW would be nuclear. All elements of the fuel cycle were assumed to be in operation. The radiological dose was calculated as a one-year dose based on ingestion of 35 different food types as well as for nine non-food pathways, and was reported as dose to the total body and for six specific organs for each of four age groups (infant, child, teen, and adult). Results indicate that the average individual would receive an incremental dose of 7 x 10/sup -4/ millirems in the year 2000 from the operation of nuclear facilities within and adjacent to the region, five orders of magnitude smaller than the dose from naturally occurring radiation in the area. The major contributor to dose was found to be tritium, and the most significant pathways were immersion in air, inhalation of air, transpiration of tritium (absorption through the skin), and exposure radionuclide-containing soil. 60 references.

  1. Controlled Archaeological Test Site (CATS) Facility

    Data.gov (United States)

    Federal Laboratory Consortium — CATS facility is at the Construction Engineering Research Laboratory (CERL), Champaign, IL. This 1-acre test site includes a variety of subsurface features carefully...

  2. 77 FR 12081 - Comscope, Inc., Catawba Facility, A Subsidiary of the Carlyle Group Including On-Site Leased...

    Science.gov (United States)

    2012-02-28

    ... Carolina. The workers are engaged in activities related to the production of coaxial cable and coax products for the cable television industry. The notice was published in the Federal Register on October 26... Including On-Site Leased Workers From Staffmasters, Including On- Site Workers from Cable Transport,...

  3. Sustainable Design Guidelines for the Construction of New Facilities and the Renovation of Existing Structures.

    Science.gov (United States)

    Dorsey, Judy; L'Esperance, Clare

    This guide summarizes research conducted at Colorado's Poudre School District (PSD) to develop guidelines for the desired performance outcomes from employing sustainable educational facility design, and it suggests approaches for attaining them. The guide also provides case studies and references to further investigate opportunities on specific…

  4. Constructed wetland with a polyculture of ornamental plants for wastewater treatment at a rural tourism facility

    DEFF Research Database (Denmark)

    Calheiros, Cristina S C; Bessa, Vânia S.; Mesquita, Raquel B R

    2015-01-01

    Sewage management in remote rural and mountain areas constitutes a challenge because of the lack of adequate infrastructure and economical capability. Tourism facilities, in particular, possess a special challenge because of huge variability in sewage production and composition as a consequence o...

  5. Constructed wetland with a polyculture of ornamental plants for wastewater treatment at a rural tourism facility

    DEFF Research Database (Denmark)

    Calheiros, Cristina S C; Bessa, Vânia S.; Mesquita, Raquel B R

    2015-01-01

    Sewage management in remote rural and mountain areas constitutes a challenge because of the lack of adequate infrastructure and economical capability. Tourism facilities, in particular, possess a special challenge because of huge variability in sewage production and composition as a consequence o...

  6. TRI mu P - a radioactive isotope trapping facility under construction at KVI

    NARCIS (Netherlands)

    Berg, GP; Dendooven, P; Dermois, O; Harakeh, MN; Hoekstra, R; Jungmann, K; Kopecky, S; Morgenstern, R; Rogachevskiy, A; Timmermans, R; Willmann, L; Wischut, HW

    2003-01-01

    At the Kernfysisch Versneller Instituut a new facility (TRImuP) is under development which aims, to investigate fundamental interactions using radioactive ions. A spectrum of radioactive isotopes will be produced in inverse-kinematics and fragmentation reactions using heavy-ion beams from the superc

  7. 45 CFR 1309.10 - Applications for the purchase, construction and major renovation of facilities.

    Science.gov (United States)

    2010-10-01

    ... available for a playground and for parking). If incidental alterations and renovations or major renovations...)(C)) and its implementing regulations (40 CFR parts 1500 through 1508), as well as a report showing the results of tests for environmental hazards present in the facility, ground water, and soil...

  8. Environmental Assessment: Construction and Operation of Security Forces & Command Post / Installation Control Center Facilities

    Science.gov (United States)

    2008-01-03

    Operation of Security Forces &Command Post/ICC Facilities January 03, 2008 91 6.0 PERSONS CONTACTED Russell Adams – 78th CEG/CEVQ Larry J. Allen...fPD believes the proposed project will have no adverse effect on Building 300, as defined in 36 CFR Parr 800.5(d)(l). Please note that historic and

  9. Construction of Civil and Public Facilities of Chinese Cities in 2006

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>In 2006, by adopting the Scientific View of Development to guide the urban con-struction, the municipal governments of different levels in China continued to carry out the policies and measures issued by the Central Government con-

  10. Research on the application of PPP model in the Chinese construction and operation of new energy vehicle charging facilities

    Science.gov (United States)

    Zhu, Liping

    2017-05-01

    New energy car charging equipment is the development and popularization of new energy vehicles. It has the nature of quasi-public goods. Due to the large number of construction projects, wide distribution, big investment, it needs huge sums of money. PPP mode is a new financing model and has the inherent driving force to lead the idea the technology and the system innovation. The government and the social subject cooperate on the basis of the spirit of contract thus achieve benefit sharing. This mode effectively improve the operation of new energy vehicle charging facilities operating efficiency

  11. Numerical simulation for horizontal subsurface flow constructed wetlands: A short review including geothermal effects and solution bounding in biodegradation procedures

    Science.gov (United States)

    Liolios, K.; Tsihrintzis, V.; Angelidis, P.; Georgiev, K.; Georgiev, I.

    2016-10-01

    Current developments on modeling of groundwater flow and contaminant transport and removal in the porous media of Horizontal Subsurface Flow Constructed Wetlands (HSF CWs) are first reviewed in a short way. The two usual environmental engineering approaches, the black-box and the process-based one, are briefly presented. Next, recent research results obtained by using these two approaches are briefly discussed as application examples, where emphasis is given to the evaluation of the optimal design and operation parameters concerning HSF CWs. For the black-box approach, the use of Artificial Neural Networks is discussed for the formulation of models, which predict the removal performance of HSF CWs. A novel mathematical prove is presented, which concerns the dependence of the first-order removal coefficient on the Temperature and the Hydraulic Residence Time. For the process-based approach, an application example is first discussed which concerns procedures to evaluate the optimal range of values for the removal coefficient, dependent on either the Temperature or the Hydraulic Residence Time. This evaluation is based on simulating available experimental results of pilot-scale units operated in Democritus University of Thrace, Xanthi, Greece. Further, in a second example, a novel enlargement of the system of Partial Differential Equations is presented, in order to include geothermal effects. Finally, in a third example, the case of parameters uncertainty concerning biodegradation procedures is considered and the use of upper and a novel approach is presented, which concerns the upper and the lower solution bound for the practical draft design of HSF CWs.

  12. Method for assessment of stormwater treatment facilities – Synthetic road runoff addition including micro-pollutants and tracer

    DEFF Research Database (Denmark)

    Cederkvist, Karin; Jensen, Marina Bergen; Holm, Peter Engelund

    2017-01-01

    representative of runoff from roads is suggested, as well as relevant concentration ranges. The method was used for adding contaminants to three different STFs including a curbstone extension with filter soil, a dual porosity filter, and six different permeable pavements. Evaluation of the method showed......% in the dual porosity filter, stressing the importance of including a conservative tracer for correction of contaminant retention values. The method is considered useful in future treatment performance testing of STFs. The observed performance of the STFs is presented in coming papers....

  13. TRI mu P - a radioactive isotope trapping facility under construction at KVI

    CERN Document Server

    Berg, G P; Dermois, O; Harakeh, M N; Hoekstra, R; Jungmann, Klaus; Kopecky, S; Morgenstern, R; Rogachevskiy, A; Timmermans, R; Willmann, L; Wilschut, H W

    2003-01-01

    At the Kernfysisch Versneller Instituut a new facility (TRI mu P) is under development which aims to investigate fundamental interactions using radioactive ions. A spectrum of radioactive isotopes will be produced in inverse-kinematics and fragmentation reactions using heavy-ion beams from the superconducting cyclotron AGOR. The reaction products will be separated from the primary beam in a dual-mode recoil and fragment separator. The beam of isotopes of interest will be transformed into a low-energy, high-quality, bunched beam and, after neutralization, stored in an atom trap. The emphasis will be put on studying the origin of parity violation via beta-nu angular correlations and the search for permanent electric dipole moments of atoms and nuclei. The facility will be open to outside users; suggestions for collaborations to extend the scientific program are encouraged.

  14. Construction of a naturally occurring radioactive material project in the BeAAT hazardous waste facilities.

    Science.gov (United States)

    Abuahmad, H

    2015-06-01

    This paper does not necessarily reflect the views of the International Commission on Radiological Protection. Naturally occurring radioactive material (NORM) is produced during exploration and production operations of subsidiaries of the Abu Dhabi National Oil Company (ADNOC) in the United Arab Emirates, and accumulates in drilling tubulars, plant equipment, and components. These NORM hazardous wastes need to be managed in such a way that they do not damage human health and the environment. The primary radionuclides of concern in the oil and gas industries are radium-226 and radium-228. These radioisotopes are the decay products of uranium and thorium isotopes that are present in subsurface formations from which hydrocarbons are produced. While uranium and thorium are largely immobile, radium is slightly more soluble and may become mobilised in the fluid phases of the formation (International Association of Oil & Gas Producers, 2008). In order to treat and dispose of NORM waste products safely, ADNOC's subsidiary 'TAKREER' is developing a new facility, on behalf of all ADNOC subsidiaries, within the existing Central Environmental Protection Facilities (BeAAT) in Ruwais city. The NORM plant is envisaged to treat, handle, and dispose of NORM waste in the forms of scale, sludge, and contaminated equipment. The NORM treatment facility will cover activities such as decontamination, volume reduction, NORM handling, and concrete immobilisation of NORM waste into packages for designated landfilling. © The International Society for Prosthetics and Orthotics Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  15. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site. Annual report, FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-11-01

    Construction of the Defense Waste Processing Facility (DWPF) on the Savannah River Site (SRS) began during FY-1984. The Savannah River Ecology Laboratory (SREL) has completed 15 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Through the long-term census taking of biota at the DWPF site and Rainbow Bay, SREL has been evaluating the impact of construction on the biota and the effectiveness of mitigation efforts. similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10 CFR 1022).

  16. Capabilities, Design, Construction and Commissioning of New Vibration, Acoustic, and Electromagnetic Capabilities Added to the World's Largest Thermal Vacuum Chamber at NASA's Space Power Facility

    Science.gov (United States)

    Motil, Susan M.; Ludwiczak, Damian R.; Carek, Gerald A.; Sorge, Richard N.; Free, James M.; Cikanek, Harry A., III

    2011-01-01

    NASA s human space exploration plans developed under the Exploration System Architecture Studies in 2005 included a Crew Exploration Vehicle launched on an Ares I launch vehicle. The mass of the Crew Exploration Vehicle and trajectory of the Ares I coupled with the need to be able to abort across a large percentage of the trajectory generated unprecedented testing requirements. A future lunar lander added to projected test requirements. In 2006, the basic test plan for Orion was developed. It included several types of environment tests typical of spacecraft development programs. These included thermal-vacuum, electromagnetic interference, mechanical vibration, and acoustic tests. Because of the size of the vehicle and unprecedented acoustics, NASA conducted an extensive assessment of options for testing, and as result, chose to augment the Space Power Facility at NASA Plum Brook Station, of the John H. Glenn Research Center to provide the needed test capabilities. The augmentation included designing and building the World s highest mass capable vibration table, the highest power large acoustic chamber, and adaptation of the existing World s largest thermal vacuum chamber as a reverberant electromagnetic interference test chamber. These augmentations were accomplished from 2007 through early 2011. Acceptance testing began in Spring 2011 and will be completed in the Fall of 2011. This paper provides an overview of the capabilities, design, construction and acceptance of this extraordinary facility.

  17. Construction safety program for the National Ignition Facility, July 30, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Benjamin, D W

    1999-07-30

    The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and start-up of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF's management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner that prevents job-related disabling injuries and illnesses. Integrated Safety Management (ISM) is practiced in the execution of all activities associated with the NIF Project. The seven Principles of ISM are: (1) Line management is responsible for safety. (2) Clear roles and responsibilities are established and maintained. (3) Personnel possess competence commensurate with responsibilities. (4) Resource allocations are balanced, making ES and H a priority in project planning and execution. (5) Safety requirements are identified and implemented. (6) Hazard controls are tailored to the project work. (7) Operations are authorized before work begins.

  18. The construction of the Fiber-SiPM beam monitor system of the R484 and R582 experiments at the RIKEN-RAL muon facility

    Science.gov (United States)

    Bonesini, M.; Bertoni, R.; Chignoli, F.; Mazza, R.; Cervi, T.; de Bari, A.; Menegolli, A.; Prata, M. C.; Rossella, M.; Tortora, L.; Carbone, R.; Mocchiutti, E.; Vacchi, A.; Vallazza, E.; Zampa, G.

    2017-03-01

    The scintillating fiber-SiPM beam monitor detectors, designed to deliver beam informations for the R484 and R582 experiments at the high intensity, low energy pulsed muon beam at the RIKEN-RAL facility, have been successfully constructed and operated. Details on their construction and first performances in beam are reported.

  19. Facile fabrication of tissue-engineered constructs using nanopatterned cell sheets and magnetic levitation

    Science.gov (United States)

    Penland, Nisa; Choi, Eunpyo; Perla, Mikael; Park, Jungyul; Kim, Deok-Ho

    2017-02-01

    We report a simple and versatile method for in vitro fabrication of scaffold-free tissue-engineered constructs with predetermined cellular alignment, by combining magnetic cell levitation with thermoresponsive nanofabricated substratum (TNFS) based cell sheet engineering technique. The TNFS based nanotopography provides contact guidance cues for regulation of cellular alignment and enables cell sheet transfer, while magnetic nanoparticles facilitate the magnetic levitation of the cell sheet. The temperature-mediated change in surface wettability of the thermoresponsive poly(N-isopropylacrylamide), substratum enables the spontaneous detachment of cell monolayers, which can then be easily manipulated through use of a ring or disk shaped magnet. Our developed platform could be readily applicable to production of tissue-engineered constructs containing complex physiological structures for the study of tissue structure-function relationships, drug screening, and regenerative medicine.

  20. Design and construction of a Wien velocity filter for AMS facilities

    CERN Document Server

    Catana, D; Enachescu, M; Plostinaru, V D; Vata, I; Rohrer, L

    2001-01-01

    Many experiments in atomic and nuclear physics using accelerated particles require accurate ion beams with respect to their atomic number, mass number and ion charge. These requirements have special important for experiments of accelerated mass spectrometry. Double focussing analyzing magnets perform the mass selection of charged ions. However, the magnetic analyzer cannot distinguish between particles with equal charge and having the same mass-velocity product. A simple way of resolving this degeneracy is to use a Wien velocity filter, WVF, in conjunction with the magnet analyzers. The design and construction of a WVF is presented together with experiments performed to determine the separation power. A velocity separation DELTA v/v = 1/100 was obtained. The design in this separate arrangements of fields is simple and straightforward. The construction can be achieved in a usual workshop. The applications of the WVF are manifold, e.g., AMS, ERDA, RBS, etc. (authors)

  1. Facile fabrication of tissue-engineered constructs using nanopatterned cell sheets and magnetic levitation.

    Science.gov (United States)

    Penland, Nisa; Choi, Eunpyo; Perla, Mikael; Park, Jungyul; Kim, Deok-Ho

    2017-02-17

    We report a simple and versatile method for in vitro fabrication of scaffold-free tissue-engineered constructs with predetermined cellular alignment, by combining magnetic cell levitation with thermoresponsive nanofabricated substratum (TNFS) based cell sheet engineering technique. The TNFS based nanotopography provides contact guidance cues for regulation of cellular alignment and enables cell sheet transfer, while magnetic nanoparticles facilitate the magnetic levitation of the cell sheet. The temperature-mediated change in surface wettability of the thermoresponsive poly(N-isopropylacrylamide), substratum enables the spontaneous detachment of cell monolayers, which can then be easily manipulated through use of a ring or disk shaped magnet. Our developed platform could be readily applicable to production of tissue-engineered constructs containing complex physiological structures for the study of tissue structure-function relationships, drug screening, and regenerative medicine.

  2. Universal Molecular Scaffold for Facile Construction of Multivalent and Multimodal Imaging Probes.

    Science.gov (United States)

    Gai, Yongkang; Xiang, Guangya; Ma, Xiang; Hui, Wenqi; Ouyang, Qin; Sun, Lingyi; Ding, Jiule; Sheng, Jing; Zeng, Dexing

    2016-03-16

    Multivalent and multimodal imaging probes are rapidly emerging as powerful chemical tools for visualizing various biochemical processes. Herein, we described a bifunctional chelator (BFC)-based scaffold that can be used to construct such promising probes concisely. Compared to other reported similar scaffolds, this new BFC scaffold demonstrated two major advantages: (1) significantly simplified synthesis due to the use of this new BFC that can serve as chelator and linker simultaneously; (2) highly efficient synthesis rendered by using either click chemistry and/or total solid-phase synthesis. In addition, the versatile utility of this molecular scaffold has been demonstrated by constructing several multivalent/multimodal imaging probes labeled with various radioisotopes, and the resulting radiotracers demonstrated substantially improved in vivo performance compared to the two individual monomeric counterparts.

  3. Environmental Assessment for Proposed Construction Freight Transfer Facility, Buckley Air Force Base, Colorado

    Science.gov (United States)

    2007-06-01

    removed during the project would be used as fill material or stock piled for use at other locations on Buckley AFB. Implementation of BMPs during...associated with mixed grass prairie are scarlet globe mallow (Spaeralcea coccinea), prickly pear (Opuntia macrohiza), rabbitbrush (Chrysothamnus...minimize potential erosion and sedimentation during the construction phase • Soil removed during the project would be used as fill material or stock

  4. Design and construction of models for the National Transonic Facility, part 2

    Science.gov (United States)

    Young, C. P., Jr.

    1985-01-01

    This lecture presents the results of fastener load and retention systems tests which were carried out as a part of the cryogenic models technology development program a the NASA Langley Research Center (LaRC). Various design concepts for the National Transonic Facility (NTF) developmental and production models are discussed. A number of NTF models are described with emphasis on materials used, uniqueness of design and design drivers. Design and fabrication experience is presented in terms of the primary thermal and mechanical considerations required for design as well as fabrication. Cost considerations are addressed in terms of factors influencing costs for NTF models and cost data comparisons which are taken from both NASA Langley and industry experience.

  5. Design and construction of a pre-injector for the Iranian Light Source Facility

    Directory of Open Access Journals (Sweden)

    A Sadeghipanah

    2015-09-01

    Full Text Available Every synchrotron accelerator requires a pre-injector for primary injection of the electrons into the booster ring. The Iranian Light Source Facility (ILSF pre-injector is a 150 MeV S-band linear accelerator with a thermionic cathode RF gun. The design of the pre-injector lattice and its beam dynamics calculation results together with the design of RF gun, alpha magnet, quadrupole magnets and linear accelerator structures are described in this article. The measurement results of the RF gun prototype fabricated in Iran demonstrate a dimension error less than 20 μm and a surface roughness of less than 0.8 μm

  6. Ford-Class Aircraft Carrier: Congress Should Consider Revising Cost Cap Legislation to Include All Construction Costs

    Science.gov (United States)

    2014-11-01

    thus increasing the likelihood of additional testing delays. For example, testing of the ship’s fire sprinklers was delayed because construction of...independent systems , which means that changes in one system are not automatically updated in the other. Consequently, the shipbuilder—and subsequently the...not deploy as scheduled or will deploy without fully tested systems . The Navy is implementing steps to achieve the $11.5 billion congressional cost

  7. Grammatical replacements in translation of German advertising texts of utomotive subject including participial constructions with attributive meaning

    Directory of Open Access Journals (Sweden)

    Артур Нарманович Мамедов

    2013-12-01

    Full Text Available Informative capacity of participial construction of source and target languages contributes to a more complex and multi aspect image of an expensive car. Dangling participles and attributive clauses placed after the determined word are being used in translation of extended adjectives with participles I and II. These grammatical transformations connected with reconstruction of semantic structure remain logically rational argumentation of an advertising text of the source language.

  8. Total heat loss coefficient of flat roof constructions with external insulation in tapered layers including the effects of thermal bridges

    DEFF Research Database (Denmark)

    Rose, Jørgen; Svendsen, Svend

    2005-01-01

    be quite tedious, and therefore a method to generate and optimize solutions has been developed and implemented in a program that also takes into account the effects of different types of thermal bridges, i.e. roof windows, insulation fasteners, roof/wall joints etc. This paper describes a new method...... for design of flat roofs and a pc-program that can be used for calculating the total heat loss coefficient of externally insulated roofs with insulation in tapered layers, taking into account thermal bridges in the roof construction....

  9. Lessons Learned from the 200 West Pump and Treatment Facility Construction Project at the US DOE Hanford Site - A Leadership for Energy and Environmental Design (LEED) Gold-Certified Facility

    Energy Technology Data Exchange (ETDEWEB)

    Dorr, Kent A.; Ostrom, Michael J.; Freeman-Pollard, Jhivaun R.

    2013-01-11

    CH2M Hill Plateau Remediation Company (CHPRC) designed, constructed, commissioned, and began operation of the largest groundwater pump and treatment facility in the U.S. Department of Energy’s (DOE) nationwide complex. This one-of-a-kind groundwater pump and treatment facility, located at the Hanford Nuclear Reservation Site (Hanford Site) in Washington State, was built to an accelerated schedule with American Recovery and Reinvestment Act (ARRA) funds. There were many contractual, technical, configuration management, quality, safety, and Leadership in Energy and Environmental Design (LEED) challenges associated with the design, procurement, construction, and commissioning of this $95 million, 52,000 ft groundwater pump and treatment facility to meet DOE’s mission objective of treating contaminated groundwater at the Hanford Site with a new facility by June 28, 2012. The project team’s successful integration of the project’s core values and green energy technology throughout design, procurement, construction, and start-up of this complex, first-of-its-kind Bio Process facility resulted in successful achievement of DOE’s mission objective, as well as attainment of LEED GOLD certification, which makes this Bio Process facility the first non-administrative building in the DOE Office of Environmental Management complex to earn such an award.

  10. Lessons Learned from the 200 West Pump and Treatment Facility Construction Project at the US DOE Hanford Site - A Leadership for Energy and Environmental Design (LEED) Gold-Certified Facility - 13113

    Energy Technology Data Exchange (ETDEWEB)

    Dorr, Kent A.; Freeman-Pollard, Jhivaun R.; Ostrom, Michael J. [CH2M HILL Plateau Remediation Company, P.O. Box 1600, MSIN R4-41, 99352 (United States)

    2013-07-01

    CH2M Hill Plateau Remediation Company (CHPRC) designed, constructed, commissioned, and began operation of the largest groundwater pump and treatment facility in the U.S. Department of Energy's (DOE) nationwide complex. This one-of-a-kind groundwater pump and treatment facility, located at the Hanford Nuclear Reservation Site (Hanford Site) in Washington State, was built to an accelerated schedule with American Recovery and Reinvestment Act (ARRA) funds. There were many contractual, technical, configuration management, quality, safety, and Leadership in Energy and Environmental Design (LEED) challenges associated with the design, procurement, construction, and commissioning of this $95 million, 52,000 ft groundwater pump and treatment facility to meet DOE's mission objective of treating contaminated groundwater at the Hanford Site with a new facility by June 28, 2012. The project team's successful integration of the project's core values and green energy technology throughout design, procurement, construction, and start-up of this complex, first-of-its-kind Bio Process facility resulted in successful achievement of DOE's mission objective, as well as attainment of LEED GOLD certification (Figure 1), which makes this Bio Process facility the first non-administrative building in the DOE Office of Environmental Management complex to earn such an award. (authors)

  11. Data Gap Analysis and Damage Case Studies: Risk Analyses from Construction and Demolition Debris Landfills and Recycling Facilities

    Science.gov (United States)

    The report presents an evaluation of construction and demolition (C&D) debris management in the US to update and expand upon the previous set of data to include information on more recent cases of damage and potential impacts and expand the breadth of damages beyond groundwater a...

  12. Design, construction, and demonstration of a neutron beamline and a neutron imaging facility at a Mark-I TRIGA reactor

    Science.gov (United States)

    Craft, Aaron E.

    The fleet of research and training reactors is aging, and no new research reactors are planned in the United States. Thus, there is a need to expand the capabilities of existing reactors to meet users' needs. While many research reactors have beam port facilities, the original design of the United States Geological Survey TRIGA Reactor (GSTR) did not include beam ports. The MInes NEutron Radiography (MINER) facility developed by this thesis and installed at the GSTR provides new capabilities for both researchers and students at the Colorado School of Mines. The facility consists of a number of components, including a neutron beamline and beamstop, an optical table, an experimental enclosure and associated interlocks, a computer control system, a multi-channel plate imaging detector, and the associated electronics. The neutron beam source location, determined through Monte Carlo modeling, provides the best mixture of high neutron flux, high thermal neutron content, and low gamma radiation content. A Monte Carlo n-Particle (MCNP) model of the neutron beam provides researchers with a tool for designing experiments before placing objects in the neutron beam. Experimental multi-foil activation results, compared to calculated multi-foil activation results, verify the model. The MCNP model predicts a neutron beamline flux of 2.2*106 +/- 6.4*105 n/cm2-s based on a source particle rate determined from the foil activation experiments when the reactor is operating at a power of 950 kWt with the beam shutter fully open. The average cadmium ratio of the beamline is 7.4, and the L/D of the neutron beam is approximately 200+/-10. Radiographs of a sensitivity indicator taken using both the digital detector and the transfer foil method provide one demonstration of the radiographic capabilities of the new facility. Calibration fuel pins manufactured using copper and stainless steel surrogate fuel pellets provide additional specimens for demonstration of the new facility and offer a

  13. 42 CFR 137.335 - What costs may be included in the budget for a construction agreement?

    Science.gov (United States)

    2010-10-01

    ... lease or acquisition; (5) Development of project surveys including topographical surveys, site boundary descriptions, geotechnical surveys, archeological surveys, and NEPA compliance; (6) Project...

  14. Total heat loss coefficient of flat roof constructions with external insulation in tapered layers including the effects of thermal bridges

    DEFF Research Database (Denmark)

    Rose, Jørgen; Svendsen, Svend

    2005-01-01

    and insulation has to be fulfilled. Based on a given design of the tapered insulation the total heat loss coefficient of the roof can be calculated using formulae in EN ISO 6946 for typical segments of the tapered insulation. Performing design and calculations for large roofs with numerous different segments can...... for design of flat roofs and a pc-program that can be used for calculating the total heat loss coefficient of externally insulated roofs with insulation in tapered layers, taking into account thermal bridges in the roof construction.......In order to achieve durability of flat roofs with external insulation, it is necessary to secure proper drainage of the roof, i.e. to avoid water leaking into the insulation. The design of the tapered insulation of the roof is quite difficult as requirements with respect to both drainage...

  15. Engineering and construction projects for oil and gas processing facilities: Contracting, uncertainty and the economics of information

    Energy Technology Data Exchange (ETDEWEB)

    Berends, Kees [Capital Contracting Services, Shell Global Solutions International B.V., The Hague (Netherlands)

    2007-08-15

    The amount of oil and gas processing capacity required to meet demand during the next 20 years is more than twice the amount realised during the last decades. Engineering and Construction contractors (ECs) play a key role in the development and implementation of Large Engineering and Construction Projects (LECPs) for these facilities. We examine the characteristics of LECPs, demand and supply of the contracting market and the strategies traditionally adopted by owners to contract out the development and implementation of these projects to ECs. We demonstrate that these traditional strategies are not longer effective, in the current 'sellers market', to mitigate the oligopolistic economic inefficiencies. As the 'overheating' of the contracting market is expected to continue for a considerable period of time, alternative contracting strategies are required. Contract theory, particularly the economics of information on LECPs, indicates how alternative contracting strategies can be used to overcome economic inefficiencies. The effective use of these alternative strategies requires increased owner involvement and their effectiveness is contingent upon owner competency and ECs acting as the owner's agent rather than its adversary. This will require an organisational and behavioural change process for both owners and ECs. (author)

  16. 25 CFR 1000.243 - What special provisions must be included in an AFA that contains a construction program?

    Science.gov (United States)

    2010-04-01

    ... and the Tribe/Consortium must ensure that proper health and safety standards are provided for in the implementation of the AFA, including but not limited to: (1) The use of architects and engineers licensed...

  17. OPIC: a kit for rapid merit function construction for use with all versions of OSLO, including OSLO EDU

    Science.gov (United States)

    Blandford, Brian

    2005-09-01

    The history of lens design software is sadly littered with accounts of excellent programs which fell by the wayside for lack of support. Others evolved through various package formats to form the foundation of today's very successful commercial software. One example of this is the Imperial College lens design program developed throughout the 1960s, 1970s and 1980s by Charles Wynne, Michael Kidger, Prudence Wormell, and others. This program (best known as the Kidger Optics Ltd SIGMA) produced many excellent designs over the years. One reason was that the ray patterns and weighting factors for operands in the default merit function had been carefully honed through experience, to produce rapid convergence on the global optimum from a likely starting point. This paper describes a suite of optimisation raysets and weighted operands written in the C-like OSLO compiled macro language CCL, and modeled on the Imperial College tradition. It is available for free download from http://www.lambdares.com/techsupport/kb/index.phtml. Its prime function is to provide a fast, easily understood introduction to merit function construction for the beginner. One version is for use on OSLO EDU, the free version of OSLO, which is also available from the Lambda Research Corporation website. This paper demonstrates how OPIC can be used to locate, from a remote starting point, the global minimum of the "monochromatic quartet," the lens design problem from the SPIE 1990 International Lens Design Conference.

  18. Construction of Explosive Ordnance Disposal Facility Moody Air Force Base, Georgia Environmental Assessment

    Science.gov (United States)

    2008-07-01

    contaminated with toxic and hazardous substances, low-level radioactive materials, 20 petroleum, oils , lubricants, and other pollutants and contaminants...forests usually have a well- developed lower stratum of vegetation that includes tree ferns, small palms , shrubs, and herbaceous plants. Lianas and...catastrophic wildfire or deforestation activity (natural or anthropogenic). Under natural conditions, lightning- caused summer fires were an

  19. Environmental Assessment for the Proposed Construction and Operation of New Vehicle Maintenance Facility

    Science.gov (United States)

    2007-08-01

    Buchloe dactyloides). Other common grasses include tumble grass (Schedonnardus paniculatus) and three-awn (Aristida fendleriana and A. longiseta...prairie are scarlet globe mallow (Spaeralcea coccinea), prickly pear (Opuntia macrorhiza), rabbitbrush (Chrysothamnus nauseosus), and snakeweed...tridecemlineatus), fox squirrel (Sciurus niger), deer mouse (Peromyscus maniculatus), and prairie vole (Microtus ochragaster). Common lagomorphs

  20. Proposed Land Conveyance for Construction of Three Facilities at March Air Force Base, California

    Science.gov (United States)

    1988-09-01

    found. The species composition of this community includes grasses such as slender wild oat (Avena barbata), red brome ( Bromus rubens), foxtail...Hordeum sp.), ripgutgrass ( Bromus diandrus), and Schismus barbatus. Native bunch grasses of the undisturbed valley grassland community, such as needle...the southwestern part of the land, dominated by Dallis grass ( Paspalum dilatatum). The central, previously developed area consists of various

  1. Radioactive Air Emissions Notice of Construction (NOC) for the Waste Sampling and Characterization Facility (WSCF)

    Energy Technology Data Exchange (ETDEWEB)

    BATES, J.A.

    2000-05-01

    This NOC application is provided to update the description of amounts of material handled, and to update the calculation of potential for emissions and resultant calculation of offsite TEDE. This NOC also includes an updated description of the various emission units at WSCF, including use of portable tanks to receive and remove liquid waste contaminated with low levels of radioactive contamination. The resultant, adjusted estimate for TEDE to the hypothetical MEI due to all combined unabated emissions from WSCF is 1.4 E-02 millirem per year. The total adjusted estimate for all combined abated emissions is 2.8 E-03 millirem per year. No single emission unit at the WSCF Complex exceeds a potential (unabated) offsite dose of 2.7 E-03 millirem per year.

  2. Corrosion behaviour of steel rebars embedded in a concrete designed for the construction of an intermediate-level radioactive waste disposal facility

    Science.gov (United States)

    Duffó, G. S.; Arva, E. A.; Schulz, F. M.; Vazquez, D. R.

    2013-07-01

    The National Atomic Energy Commission of the Argentine Republic is developing a nuclear waste disposal management programme that contemplates the design and construction of a facility for the final disposal of intermediate-level radioactive wastes. The repository is based on the use of multiple, independent and redundant barriers. The major components are made in reinforced concrete so, the durability of these structures is an important aspect for the facility integrity. This work presents an investigation performed on an instrumented reinforced concrete prototype specifically designed for this purpose, to study the behaviour of an intermediate level radioactive waste disposal facility from the rebar corrosion point of view. The information obtained will be used for the final design of the facility in order to guarantee a service life more or equal than the foreseen durability for this type of facilities.

  3. Corrosion behaviour of steel rebars embedded in a concrete designed for the construction of an intermediate-level radioactive waste disposal facility

    Directory of Open Access Journals (Sweden)

    Schulz F.M.

    2013-07-01

    Full Text Available The National Atomic Energy Commission of the Argentine Republic is developing a nuclear waste disposal management programme that contemplates the design and construction of a facility for the final disposal of intermediate-level radioactive wastes. The repository is based on the use of multiple, independent and redundant barriers. The major components are made in reinforced concrete so, the durability of these structures is an important aspect for the facility integrity. This work presents an investigation performed on an instrumented reinforced concrete prototype specifically designed for this purpose, to study the behaviour of an intermediate level radioactive waste disposal facility from the rebar corrosion point of view. The information obtained will be used for the final design of the facility in order to guarantee a service life more or equal than the foreseen durability for this type of facilities.

  4. Lessons Learned From The 200 West Pump And Treatment Facility Construction Project At The US DOE Hanford Site - A Leadership For Energy And Environmental Design (LEED) Gold-Certified Facility

    Energy Technology Data Exchange (ETDEWEB)

    Dorr, Kent A. [CH2M HILL Plateau Remediation Company, Richland, WA (United States); Ostrom, Michael J. [CH2M HILL Plateau Remediation Company, Richland, WA (United States); Freeman-Pollard, Jhivaun R. [CH2M HILL Plateau Remediation Company, Richland, WA (United States)

    2012-11-14

    CH2M Hill Plateau Remediation Company (CHPRC) designed, constructed, commissioned, and began operation of the largest groundwater pump and treatment facility in the U.S. Department of Energy's (DOE) nationwide complex. This one-of-a-kind groundwater pump and treatment facility, located at the Hanford Nuclear Reservation Site (Hanford Site) in Washington State, was built in an accelerated manner with American Recovery and Reinvestment Act (ARRA) funds and has attained Leadership in Energy and Environmental Design (LEED) GOLD certification, which makes it the first non-administrative building in the DOE Office of Environmental Management complex to earn such an award. There were many contractual, technical, configuration management, quality, safety, and LEED challenges associated with the design, procurement, construction, and commissioning of this $95 million, 52,000 ft groundwater pump and treatment facility. This paper will present the Project and LEED accomplishments, as well as Lessons Learned by CHPRC when additional ARRA funds were used to accelerate design, procurement, construction, and commissioning of the 200 West Groundwater Pump and Treatment (2W P&T) Facility to meet DOE's mission of treating contaminated groundwater at the Hanford Site with a new facility by June 28, 2012.

  5. FIBER LASER CONSTRUCTION AND THEORY INCLUDING FIBER BRAGG GRATINGS Photonic Crystal Fibers (PCFs) and applications of gas filled PCFs

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, Jacob O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-08

    The principles used in fiber lasers have been around for a while but it is only within the past few years that fiber lasers have become commercially available and used in high power laser applications. This paper will focus on the basic design principles of fiber lasers, including fiber Bragg gratings, principles of operation, and forms of non-linear effects. It will describe the type and associated doping of the fiber used and difficult designs used to guide energy from the pump to the active medium. Topics covered include fiber laser design, fiber Bragg gratings, materials used, differences in quantum energy loss, thermo-optical effects, stimulated Raman scattering, Brillouin scattering, photonic crystal fibers and applications of gas filled Photonic Crystal Fibers (PCFs). Thanks to fiber lasers, the energy required to produce high power lasers has greatly dropped and as such we can now produce kW power using a standard 120V 15A circuit. High power laser applications are always requiring more power. The fiber laser can now deliver the greater power that these applications demand. Future applications requiring more power than can be combined using standard materials or configurations will need to be developed to overcome the high energy density and high non-linear optical scattering effects present during high power operations.

  6. A Facile Approach for Constructing Conductive Polymer Patterns for Application in Electrochromic Devices and Flexible Microelectrodes.

    Science.gov (United States)

    Kim, Dabum; Kim, Jeonghun; Ko, Youngsang; Shim, Kyubin; Kim, Jung Ho; You, Jungmok

    2016-12-07

    We developed a novel strategy for fabricating poly(3,4-ethylenedioxythiophene) (PEDOT) patterns on various substrates, including hydrogels, via sequential solution procedure without multistep chemical etching or lift-off processes. First, PEDOT nanothin films were prepared on a glass substrate by solution phase monomer casting and oxidative polymerization. As a second step, after UV-induced poly(ethylene glycol) (PEG) photolithography at the PEDOT/PEG interface through a photomask, the hydrogel was peeled away from the PEDOT-coated glass substrate to detach the UV-exposed PEDOT region, which left the UV nonexposed PEDOT region intact on the glass substrate, resulting in PEDOT patterns. In a final step, the PEDOT patterns were cleanly transferred from the glass to a flexible hydrogel substrate by a direct-transfer process based on a second round of gelation process. Using this strategy, PEDOT patterns on ITO glass or ITO film were used to successfully fabricate an electrochromic (EC) device that exhibited stable electrochromic switching as a function of applied potential. Furthermore, PEDOT patterns on hydrogel were used to fabricate all organic, flexible microelectrodes with good electrical properties and excellent mechanical flexibility. Importantly, the conductivity of PEDOT patterns on hydrogel (ca. 235 S cm(-1)) described here is significantly higher than that previously reported (ca. 20-70 S cm(-1)). This approach can be easily integrated into various technological fabrication steps for the development of next-generation bioelectronics systems.

  7. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

  8. Facile Synthesis of Smart Nanocontainers as Key Components for Construction of Self-Healing Coating with Superhydrophobic Surfaces

    Science.gov (United States)

    Liang, Yi; Wang, MingDong; Wang, Cheng; Feng, Jing; Li, JianSheng; Wang, LianJun; Fu, JiaJun

    2016-04-01

    SiO2-imidazoline nanocomposites (SiO2-IMI) owning high loading capacity of corrosion inhibitor, 1-hexadecyl-3-methylimidazolium bromide (HMID), and a special acid/alkali dual-stimuli-accelerated release property have been synthesized via a one-step modified Stöber method. SiO2-IMI were uniformly distributed into the hydrophobic SiO2 sol to construct "host"-"guest" feedback active coating with a superhydrophobic surface (SiO2-IMI@SHSC) on aluminium alloy, AA2024, by dip-coating technique. SiO2-IMI as "guest" components have good compatibility with "host" sol-gel coating, and more importantly, once localized corrosion occurs on the surface of AA2024, SiO2-IMI can simultaneously respond to the increase in environmental pH around corrosive micro-cathodic regions and decrease in pH near micro-anodic regions, promptly releasing HMID to form a compact molecular film on the damaged surface, inhibiting corrosion spread and executing a self-healing function. The scanning vibrating electrode technique (SVET) was applied to illustrate the suppression process of cathodic/anodic corrosion activities. Furthermore, benefiting from the superhydrophobic surface, SiO2-IMI@SHSC remained its protective ability after immersion in 0.5 M NaCl solution for 35 days, which is far superior to the conventional sol-gel coating with the same coating thickness. The facile fabrication method of SiO2-IMI simplifies the construction procedure of SiO2-IMI@SHSC, which have great potential to replace non-environmental chromate conversion coatings for practical use.

  9. Facile Synthesis of Smart Nanocontainers as Key Components for Construction of Self-Healing Coating with Superhydrophobic Surfaces.

    Science.gov (United States)

    Liang, Yi; Wang, MingDong; Wang, Cheng; Feng, Jing; Li, JianSheng; Wang, LianJun; Fu, JiaJun

    2016-12-01

    SiO2-imidazoline nanocomposites (SiO2-IMI) owning high loading capacity of corrosion inhibitor, 1-hexadecyl-3-methylimidazolium bromide (HMID), and a special acid/alkali dual-stimuli-accelerated release property have been synthesized via a one-step modified Stöber method. SiO2-IMI were uniformly distributed into the hydrophobic SiO2 sol to construct "host"-"guest" feedback active coating with a superhydrophobic surface (SiO2-IMI@SHSC) on aluminium alloy, AA2024, by dip-coating technique. SiO2-IMI as "guest" components have good compatibility with "host" sol-gel coating, and more importantly, once localized corrosion occurs on the surface of AA2024, SiO2-IMI can simultaneously respond to the increase in environmental pH around corrosive micro-cathodic regions and decrease in pH near micro-anodic regions, promptly releasing HMID to form a compact molecular film on the damaged surface, inhibiting corrosion spread and executing a self-healing function. The scanning vibrating electrode technique (SVET) was applied to illustrate the suppression process of cathodic/anodic corrosion activities. Furthermore, benefiting from the superhydrophobic surface, SiO2-IMI@SHSC remained its protective ability after immersion in 0.5 M NaCl solution for 35 days, which is far superior to the conventional sol-gel coating with the same coating thickness. The facile fabrication method of SiO2-IMI simplifies the construction procedure of SiO2-IMI@SHSC, which have great potential to replace non-environmental chromate conversion coatings for practical use.

  10. Construction

    Science.gov (United States)

    2002-01-01

    Harbor Deepening Project, Jacksonville, FL Palm Valley Bridge Project, Jacksonville, FL Rotary Club of San Juan, San Juan, PR Tren Urbano Subway...David. What is nanotechnology? What are its implications for construction?, Foresight/CRISP Workshop on Nanotechnology, Royal Society of Arts

  11. Proposed Use of a Constructed Wetland for the Treatment of Metals in the S-04 Outfall of the Defense Waste Processing Facility at the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Glover, T.

    1999-11-23

    The DWPF is part of an integrated waste treatment system at the SRS to treat wastes containing radioactive contaminants. In the early 1980s the DOE recognized that there would be significant safety and cost advantages associated with immobilizing the radioactive waste in a stable solid form. The Defense Waste Processing Facility was designed and constructed to accomplish this task.

  12. A Facile Protocol for the Construction of Tricyclic Framework Tetrahydrobenzo-4-nitrobenzenesulfonate, 4-methylbenzenesulfonate and [1,8] naphthyridine Substituents from Methyl δ-Lactam

    Directory of Open Access Journals (Sweden)

    Shireen Mohammed

    2015-12-01

    Full Text Available Retraction of: A Facile Protocol for the Construction of Tricyclic Framework Tetrahydrobenzo-4-nitrobenzenesulfonate, 4-methylbenzenesulfonate and [1,8] naphthyridine Substituents from Methyl δ-Lactam/, http://dx.doi.org/10.13005/ojc/310435 by Shireen Mohammed and Maher Khalid as it was published by them without the permission of their supervisor.

  13. Facile construction of 3D graphene/MoS2 composites as advanced electrode materials for supercapacitors

    Science.gov (United States)

    Sun, Tianhua; Li, Zhangpeng; Liu, Xiaohong; Ma, Limin; Wang, Jinqing; Yang, Shengrong

    2016-11-01

    Flower-like molybdenum disulfide (MoS2) microstructures are synthesized based on three-dimensional graphene (3DG) skeleton via a simple and facile one-step hydrothermal method, aiming at constructing series of novel composite electrode materials of 3DG/MoS2 with high electrochemical performances for supercapacitors. The electrochemical properties of the samples are evaluated by cyclic voltammetry and galvanostatic charge/discharge tests. Specifically, the optimal 3DG/MoS2 composite exhibits remarkable performances with a high specific capacitance of 410 F g-1 at a current density of 1 A g-1 and an excellent cycling stability with ca. 80.3% capacitance retention after 10,000 continuous charge-discharge cycles at a high current density of 2 A g-1, making it adaptive for high-performance supercapacitors. The enhanced electrochemical performances can be ascribed to the combination of 3DG and flower-like MoS2, which provides excellent charge transfer network and electrolyte diffusion channels while effectively prevents the collapse, aggregation and morphology change of active materials during charge-discharge process. The results demonstrate that 3DG/MoS2 composite is one of the attractive electrode materials for supercapacitors.

  14. Solving the competitive facility location problem considering the reactions of competitor with a hybrid algorithm including Tabu Search and exact method

    Science.gov (United States)

    Bagherinejad, Jafar; Niknam, Azar

    2017-06-01

    In this paper, a leader-follower competitive facility location problem considering the reactions of the competitors is studied. A model for locating new facilities and determining levels of quality for the facilities of the leader firm is proposed. Moreover, changes in the location and quality of existing facilities in a competitive market where a competitor offers the same goods or services are taken into account. The competitor could react by opening new facilities, closing existing ones, and adjusting the quality levels of its existing facilities. The market share, captured by each facility, depends on its distance to customer and its quality that is calculated based on the probabilistic Huff's model. Each firm aims to maximize its profit subject to constraints on quality levels and budget of setting up new facilities. This problem is formulated as a bi-level mixed integer non-linear model. The model is solved using a combination of Tabu Search with an exact method. The performance of the proposed algorithm is compared with an upper bound that is achieved by applying Karush-Kuhn-Tucker conditions. Computational results show that our algorithm finds near the upper bound solutions in a reasonable time.

  15. Reliability and Construct Validity of the Psychopathic Personality Inventory-Revised in a Swedish Non-Criminal Sample - A Multimethod Approach including Psychophysiological Correlates of Empathy for Pain.

    Science.gov (United States)

    Sörman, Karolina; Nilsonne, Gustav; Howner, Katarina; Tamm, Sandra; Caman, Shilan; Wang, Hui-Xin; Ingvar, Martin; Edens, John F; Gustavsson, Petter; Lilienfeld, Scott O; Petrovic, Predrag; Fischer, Håkan; Kristiansson, Marianne

    2016-01-01

    Cross-cultural investigation of psychopathy measures is important for clarifying the nomological network surrounding the psychopathy construct. The Psychopathic Personality Inventory-Revised (PPI-R) is one of the most extensively researched self-report measures of psychopathic traits in adults. To date however, it has been examined primarily in North American criminal or student samples. To address this gap in the literature, we examined PPI-R's reliability, construct validity and factor structure in non-criminal individuals (N = 227) in Sweden, using a multimethod approach including psychophysiological correlates of empathy for pain. PPI-R construct validity was investigated in subgroups of participants by exploring its degree of overlap with (i) the Psychopathy Checklist: Screening Version (PCL:SV), (ii) self-rated empathy and behavioral and physiological responses in an experiment on empathy for pain, and (iii) additional self-report measures of alexithymia and trait anxiety. The PPI-R total score was significantly associated with PCL:SV total and factor scores. The PPI-R Coldheartedness scale demonstrated significant negative associations with all empathy subscales and with rated unpleasantness and skin conductance responses in the empathy experiment. The PPI-R higher order Self-Centered Impulsivity and Fearless Dominance dimensions were associated with trait anxiety in opposite directions (positively and negatively, respectively). Overall, the results demonstrated solid reliability (test-retest and internal consistency) and promising but somewhat mixed construct validity for the Swedish translation of the PPI-R.

  16. Reliability and Construct Validity of the Psychopathic Personality Inventory-Revised in a Swedish Non-Criminal Sample - A Multimethod Approach including Psychophysiological Correlates of Empathy for Pain.

    Directory of Open Access Journals (Sweden)

    Karolina Sörman

    Full Text Available Cross-cultural investigation of psychopathy measures is important for clarifying the nomological network surrounding the psychopathy construct. The Psychopathic Personality Inventory-Revised (PPI-R is one of the most extensively researched self-report measures of psychopathic traits in adults. To date however, it has been examined primarily in North American criminal or student samples. To address this gap in the literature, we examined PPI-R's reliability, construct validity and factor structure in non-criminal individuals (N = 227 in Sweden, using a multimethod approach including psychophysiological correlates of empathy for pain. PPI-R construct validity was investigated in subgroups of participants by exploring its degree of overlap with (i the Psychopathy Checklist: Screening Version (PCL:SV, (ii self-rated empathy and behavioral and physiological responses in an experiment on empathy for pain, and (iii additional self-report measures of alexithymia and trait anxiety. The PPI-R total score was significantly associated with PCL:SV total and factor scores. The PPI-R Coldheartedness scale demonstrated significant negative associations with all empathy subscales and with rated unpleasantness and skin conductance responses in the empathy experiment. The PPI-R higher order Self-Centered Impulsivity and Fearless Dominance dimensions were associated with trait anxiety in opposite directions (positively and negatively, respectively. Overall, the results demonstrated solid reliability (test-retest and internal consistency and promising but somewhat mixed construct validity for the Swedish translation of the PPI-R.

  17. Facile construction of macroporous hybrid monoliths via thiol-methacrylate Michael addition click reaction for capillary liquid chromatography.

    Science.gov (United States)

    Lin, Hui; Ou, Junjie; Liu, Zhongshan; Wang, Hongwei; Dong, Jing; Zou, Hanfa

    2015-01-30

    A facile approach based on thiol-methacrylate Michael addition click reaction was developed for construction of porous hybrid monolithic materials. Three hybrid monoliths were prepared via thiol-methacrylate click polymerization by using methacrylate-polyhedral oligomeric silsesquioxane (POSS) (cage mixture, n=8, 10, 12, POSS-MA) and three multi-thiol crosslinkers, 1,6-hexanedithiol (HDT), trimethylolpropane tris(3-mercaptopropionate) (TPTM) and pentaerythritol tetrakis(3-mercaptopropionate) (PTM), respectively, in the presence of porogenic solvents (n-propanol and PEG 200) and a catalyst (dimethylphenylphosphine, DMPP). The obtained monoliths possessed high thermal and chemical stabilities. Besides, they all exhibited high column efficiencies and excellent separation abilities in capillary liquid chromatography (cLC). The highest column efficiency could reach ca. 195,000N/m for butylbenzene on the monolith prepared with POSS-MA and TPTM (monolith POSS-TPTM) in reversed-phase (RP) mode at 0.64mm/s. Good chromatographic performance were all achieved in the separations of polycyclic aromatic hydrocarbons (PAHs), phenols, anilines, EPA 610 as well as bovine serum albumin (BSA) digest. The high column efficiencies in the range of 51,400-117,000N/m (achieved on the monolith POSS-PTM in RP mode) convincingly demonstrated the high separation abilities of these thiol-methacrylate based hybrid monoliths. All the results demonstrated the feasibility of the phosphines catalyzed thiol-methacrylate Michael addition click reaction in fabrication of monolithic columns with high efficiency for cLC applications. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Park Land and Nature Preserves, Park facilities are maintained by Johnson County Parks and Recreation Department and includes all parks with in Johnson County, Published in Not Provided, Johnson County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Park Land and Nature Preserves dataset current as of unknown. Park facilities are maintained by Johnson County Parks and Recreation Department and includes all parks...

  19. Cost and schedule estimate to construct the tunnel and shaft remedial shielding concept, Los Alamos Meson Physics Facility, Los Alamos National Laboratory, Los Alamos, New Mexico. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-30

    The report provides an estimate of the cost and associated schedule to construct the tunnel and shaft remedial shielding concept. The cost and schedule estimate is based on a preliminary concept intended to address the potential radiation effects on Line D and Line Facilities in event of a beam spill. The construction approach utilizes careful tunneling methods based on available excavation and ground support technology. The tunneling rates and overall productivity on which the cost and project schedule are estimated are based on conservative assumptions with appropriate contingencies to address the uncertainty associated with geological conditions. The report is intended to provide supplemental information which will assist in assessing the feasibility of the tunnel and shaft concept and justification for future development of this particular aspect of remedial shielding for Line D and Line D Facilities.

  20. New construction of an in-drum drying plant in the central decontamination and water treatment facility (ZDW)

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, Martin; Koischwitz, Ingmar; Viermann, Jorg [GNS Gesellschaft fur Nuklear-Service mbh, Essen (Germany)

    2013-07-01

    In order to ensure future conditioning of the accumulating radioactive liquid waste during the advancing dismantling of the nuclear power plant Greifswald, GNS provides EWN within the new construction of the ZDW with an in-drum drying plant, including the appropriate infrastructure and media supply. For the in-drum drying plant, GNS has consistently further developed the process of the FAVORIT plant operationally proven for many years. Noteworthy is that for the first time a fully automatic plant of this type has been implemented which requires interventions of the operating personnel only for rounds and for loading and unloading processes of the drum stations. Moreover, components of the vacuum unit were designed according to needs and optimised with regard to installation space and plant engineering. (authors)

  1. Air Dispersion Modeling for the INL Application for a Synthetic Minor Sitewide Air Quality Permit to Construct with a Facility Emission Cap Component

    Energy Technology Data Exchange (ETDEWEB)

    Sondrup, Andrus Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-10-01

    The Department of Energy Idaho Operations Office (DOE-ID) is applying for a synthetic minor, Sitewide, air quality permit to construct (PTC) with a facility emission cap (FEC) component from the Idaho Department of Environmental Quality (DEQ) for Idaho National Laboratory (INL) to limit its potential to emit to less than major facility limits for criteria air pollutants (CAPs) and hazardous air pollutants (HAPs) regulated under the Clean Air Act. This document is supplied as an appendix to the application, Idaho National Laboratory Application for a Synthetic Minor Sitewide Air Quality Permit to Construct with a Facility Emissions Cap Component, hereafter referred to as “permit application” (DOE-ID 2015). Air dispersion modeling was performed as part of the permit application process to demonstrate pollutant emissions from the INL will not cause a violation of any ambient air quality standards. This report documents the modeling methodology and results for the air dispersion impact analysis. All CAPs regulated under Section 109 of the Clean Air Act were modeled with the exception of lead (Pb) and ozone, which are not required to be modeled by DEQ. Modeling was not performed for toxic air pollutants (TAPs) as uncontrolled emissions did not exceed screening emission levels for carcinogenic and non-carcinogenic TAPs. Modeling for CAPs was performed with the EPA approved AERMOD dispersion modeling system (Version 14134) (EPA 2004a) and five years (2000-2004) of meteorological data. The meteorological data set was produced with the companion AERMET model (Version 14134) (EPA 2004b) using surface data from the Idaho Falls airport, and upper-air data from Boise International Airport supplied by DEQ. Onsite meteorological data from the Grid 3 Mesonet tower located near the center of the INL (north of INTEC) and supplied by the local National Oceanic and Atmospheric Administration (NOAA) office was used for surface wind directions and wind speeds. Surface data (i

  2. Floodplain/wetland assessment of the effects of construction and operation ofa depleted uranium hexafluoride conversion facility at the Paducah, Kentucky,site.

    Energy Technology Data Exchange (ETDEWEB)

    Van Lonkhuyzen, R.

    2005-09-09

    floodplain. Replacement of bridge components, including the bridge supports, however, would not be expected to result in measurable long-term changes to the floodplain. Approximately 0.16 acre (0.064 ha) of palustrine emergent wetlands would likely be eliminated by direct placement of fill material within Location A. Some wetlands that are not filled may be indirectly affected by an altered hydrologic regime, due to the proximity of construction, possibly resulting in a decreased frequency or duration of inundation or soil saturation and potential loss of hydrology necessary to sustain wetland conditions. Indirect impacts could be minimized by maintaining a buffer near adjacent wetlands. Wetlands would likely be impacted by construction at Location B; however, placement of a facility in the northern portion of this location would minimize wetland impacts. Construction at Location C could potentially result in impacts to wetlands, however placement of a facility in the southeastern portion of this location may best avoid direct impacts to wetlands. The hydrologic characteristics of nearby wetlands could be indirectly affected by adjacent construction. Executive Order 11990, ''Protection of Wetlands'', requires federal agencies to minimize the destruction, loss, or degradation of wetlands, and to preserve and enhance the natural and beneficial uses of wetlands. DOE regulations for implementing Executive Order 11990 as well as Executive Order 11988, ''Floodplain Management'', are set forth in 10 CFR Part 1022. Mitigation for unavoidable impacts may be developed in coordination with the appropriate regulatory agencies. Unavoidable impacts to wetlands that are within the jurisdiction of the USACE may require a CWA Section 404 Permit, which would trigger the requirement for a CWA Section 401 Water Quality Certification from the Commonwealth of Kentucky. A mitigation plan may be required prior to the initiation of construction. Cumulative

  3. Supplemental information for a notice of construction for the Fueled Clad Fabrication System, the Radioisotope Power Systems Facility, and the Fuel Assembly Area

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-01

    This ''Notice of Construction'' has been submitted by the US Department of Energy-Richland Operations Office (P.O. Box 550, Richland, Washington 99352), pursuant to WAC 402-80-070, for three new sources of radionuclide emissions at the Hanford Site in Washington State (Figure 1). The three new sources, the Fueled Clad Fabrication System (FCFS) the Radioisotope Power Systems Facility (RPSF) and the Fuel Assembly Area (FAA) will be located in one facility, the Fuels and materials Examination Facility (FMEF) of the 400 Area. The FMEF was originally designed to provide for post- irradiation examination and fabrication of breeder reactor fuels. These FMEF missions were cancelled before the introduction of any fuel materials or any irradiated material. The current plans are to use the facility to fabricate power supplies to be used in space applications and to produce Fast Flux Test Facility (FFTF) fuel and target assemblies. The FCFS and the RPSF will produce materials and assemblies for application in space. The FAA project will produce FFTF fuel and target assemblies. The FCFS and the RPSF will share the same building, stack, and, in certain cases, the same floor space. Given this relationship, to the extent possible, these systems will be dealt with separately. The FAA is a comparatively independent operation though it will share the FMEF complex.

  4. 75 FR 17859 - Grants to States for Construction or Acquisition of State Home Facilities-Update of Authorized Beds

    Science.gov (United States)

    2010-04-08

    ... Administrative practice and procedure, Alcohol abuse, Alcoholism, Claims, Day care, Dental health, Drug abuse..., Health facilities, Health professions, Health records, Homeless, Medical and dental schools, Medical devices, Medical research, Mental health programs, Nursing homes, Reporting and recordkeeping requirements...

  5. The extreme wave interaction with the constructions of the breakwaters including the damping chamber that was filled up with the stones and concrete units

    Science.gov (United States)

    Maximov, Vasily; Nudner, Igor; Revyakin, Alexei

    2010-05-01

    The eight types of the breakwaters constructions including the damping chamber were experimentally studied. The damping chamber has the infilling with the stones, with the concrete units, or with the combinations of the stones and units. The back wall of the damping chamber was impermeable. The construction varies by the volume and by the type of the infilling. The experiments to specify the pressure at the internal walls of the damping chamber, the reflected wave height, and the wave height at the front wall were performed at the hydro flume. This flume has the following dimensions: 43 m length, 0.7 m width, and 1.2 m height. The periodic waves were produced by the shield-type wavemaker. We vary in this research the periods of the waves over the range 0.8 s to 1.64 s, and the wave height over the range 10 cm to 24 cm. The analysis revealed the most improved structure possessing the good wave-protective features.

  6. [Genetic analysis of multidrug-resistant Streptococcus pneumoniae including meropenem resistance that was isolated from elderly residents with pneumonia in nursing-care facilities].

    Science.gov (United States)

    Ota, Kazuko; Chiba, Naoko; Sato, Kentaro; Nara, Syoetu; Kato, Satoko; Kanazawa, Hisao; Ikejima, Shin; Takahashi, Yoshihiro; Iwata, Satoshi; Ubukata, Kimiko

    2014-07-01

    From February to December 20XX, penicillin-resistant Streptococcus pneumoniae (PRSP) showing MICs of 16-32 microg/mL to cefotaxime (CTX) and 4-8 microg/mL to meropenem (MEPM) were isolated from 6 patients hospitalized at the general hospital S (2 cases) and hospital A (4 cases), close to the hospital S. Five elderly patients among these six cases came from nursing care facilities or nursing care-related medical facilities. All elderly persons (mean age: 81.7 years) were diagnosed as having pneumonia at the time of admission and the problematic PRSP was isolated from sputum samples collected on admission. Notably, all of these PRSP isolates simultaneously showed high resistance to macrolide agents mediated by an erm (B) gene and to fluoroquinolone agents via mutations in the gyrA and parC genes. Eventually, they were identified as multidrug-resistant S. pneumoniae (MDRSP) with high resistance to many agents. The capsule type of all strains was serotype 19F and multilocus sequence typing (MLST) revealed that they belonged to clonal complex (CC) 7993, which has not been reported before. It was thus concluded that the MDRSP that had spread within the nursing facilities was transmitted to the general hospitals via the elderly inpatients with pneumonia caused by these agents. Although one case finally had a poor outcome, the pneumococcal infection was not the direct trigger of the event. The current ratio of MDRSP is concluded to be very low. However, general hospitals that accept patients for therapeutic purposes from nursing-care facilities have to share epidemiological information in a timely manner with the nursing homes to prevent nosocomial infections.

  7. Exploration and implementation for the construction of the quaternary teaching system of medical genetics including teaching, practice, research and clinical application.

    Science.gov (United States)

    Fengjuan, Zhou; Wenmei, Xie; Qiang, Wang; Xiaorong, Zhao

    2015-09-01

    Medical genetics, the connection between basic and clinical medicine, is a subject with strong applicability and plays important role in modern medical education system. Based on years of teaching experience and during the construction of state-level top quality course, our teaching team has established the quaternary teaching system of medical genetics which includes teaching, practice, research and clinical application. The four elements of the system interpenetrate, complement and reinforce each other. Specifically, classroom teaching is the basics which is further complemented by social practice, improved by research and promoted by clinical application. The quaternary teaching system provides a feasible way to integrate theoretical and clinical courses. After years of implementation, the teaching system has got great effects on the obvious improvement of research ability, social reputation and clinical service capacities of the research team.

  8. Ecological studies related to construction of the Defense Waste Processing Facility on the Savannah River Site. FY 1989--1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Pechmann, J.H.K.; Scott, D.E.; McGregor, J.H.; Estes, R.A.; Chazal, A.C.

    1993-02-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980`s. The Savannah River Ecology Laboratory (SREL) has completed 12 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites? (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site? (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams? (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of ``refuge ponds`` as alternative breeding sites for amphibians that formerly bred at Sun Bay? Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10CFR1022).

  9. Ecological studies related to the construction of the Defense Waste Processing Facility on the Savannah River Site. Annual report, FY-1991 and FY-1992

    Energy Technology Data Exchange (ETDEWEB)

    Scott, D.E.; Chazel, A.C.; Pechmann, J.H.K.; Estes, R.A.

    1993-06-01

    The Defense Waste Processing Facility (DWPF) was built on the Savannah River Site (SRS) during the mid-1980`s. The Savannah River Ecology Laboratory (SREL) has completed 14 years of ecological studies related to the construction of the DWPF complex. Prior to construction, the 600-acre site (S-Area) contained a Carolina bay and the headwaters of a stream. Research conducted by the SREL has focused primarily on four questions related to these wetlands: (1) Prior to construction, what fauna and flora were present at the DWPF site and at similar, yet undisturbed, alternative sites? (2) By comparing the Carolina bay at the DWPF site (Sun Bay) with an undisturbed control Carolina bay (Rainbow Bay), what effect is construction having on the organisms that inhabited the DWPF site? (3) By comparing control streams with streams on the periphery of the DWPF site, what effect is construction having on the peripheral streams? (4) How effective have efforts been to lessen the impacts of construction, both with respect to erosion control measures and the construction of ``refuge ponds`` as alternative breeding sites for amphibians that formerly bred at Sun Bay? Through the long-term census-taking of biota at the DWPF site and Rainbow Bay, SREL has begun to evaluate the impact of construction on the biota and the effectiveness of mitigation efforts. Similarly, the effects of erosion from the DWPF site on the water quality of S-Area peripheral streams are being assessed. This research provides supporting data relevant to the National Environmental Policy Act (NEPA) of 1969, the Endangered Species Act of 1973, Executive Orders 11988 (Floodplain Management) and 11990 (Protection of Wetlands), and United States Department of Energy (DOE) Guidelines for Compliance with Floodplain/Wetland Environmental Review Requirements (10 CFR 1022).

  10. Environmental Assessment: Proposed Construction of a New Entry Control Facility and Visitors Center Adjacent to the Bell Street Gate

    Science.gov (United States)

    2005-06-01

    Cannon Street, Building 1060 Maxwell AFB, AL 36112 Tel.: 334-953-5260 • 334-3964004 L E C Maxwell Support Division March 17, 2005 Mr. David Rabon ...Facility (ECF) and Visitors Center Maxwell Air Force Base, Alabama Dear Mr. Rabon , The United States Air Force is preparing an Environmental Assessment

  11. 环卫设施建设现状及改进探讨%Discussion of the Construction Status and Improvement of the Sanitation Facilities

    Institute of Scientific and Technical Information of China (English)

    朱红

    2014-01-01

    This article has carried on a thorough analysis on the current status of the development of sanitation facilities in China, and finds the leakage in sanitation work to improve the problems, so as to promote the long-term development of the environmental protection facilities construction.%本文对我国当前的环卫设施的发展现状进行了深入细致地分析,发现环卫工作中的不足,对于其中存在的问题进行了改善,从而促进环保设施建设的长远发展。

  12. Rural Infrastructure Construction in New Socialist Countryside Construction

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    In the background of new socialist countryside construction,rural infrastructure construction is favorable to consolidating fundamental position of agriculture,expanding rural job opportunities,increasing farmers’ income,and favorable to development of rural economy and the national economy. Rural infrastructure construction mainly includes construction of agricultural basic production conditions,construction of rural ecological environment,construction of agricultural service system,and construction of rural living facilities. Finally,we put forward approaches and methods for strengthening rural infrastructure construction: firstly,increase fund input to provide financial support for rural infrastructure construction; second ly,make scientific village planning to ensure sustainability of rural infrastructure construction; thirdly,arouse farmers’ enthusiasm and initiative to promote stable development of rural infrastructure construction.

  13. Six Case Studies on Alternative Construction Methods: One-Step ’Turnkey’ Facility Acquisition and Architectural Fabric Structure Technology

    Science.gov (United States)

    1988-05-01

    maintenance building was $102K, and $120K for the general purpose building. The contract was awarded to Silverton Construction Co., El Paso, TX, which...considered as "bids" for the fabric structures. In preparing its bid, Silverton obtained ,bi.e° st..uct.u, price quotes from two manuf-n-curers and chose...concept estimate) versus $37.58 for fabric structures (see Table 3). Construction Documentation Silverton submitted the Roder Building Systems design

  14. Theme: Laboratory Facilities Improvement.

    Science.gov (United States)

    Miller, Glen M.; And Others

    1993-01-01

    Includes "Laboratory Facilities Improvement" (Miller); "Remodeling Laboratories for Agriscience Instruction" (Newman, Johnson); "Planning for Change" (Mulcahy); "Laboratory Facilities Improvement for Technology Transfer" (Harper); "Facilities for Agriscience Instruction" (Agnew et al.); "Laboratory Facility Improvement" (Boren, Dwyer); and…

  15. Environmental Assessment for the Construction of Power and Fiber Optic Lines to Facilities in the Yukon Training Area, Alaska-Phase 3

    Science.gov (United States)

    2006-07-01

    feather moss. Closed canopy black spruce forest tends to return to its original composition after fire (Viereck et al., 1992). In the absence of fire...facility, the vegetation becomes a more open growth of mixed spruce and hardwoods, with it eventually getting to an alpine tundra vegetative community...area. Non migratory birds include ravens, jays, chickadees, songbirds, woodpeckers, grouse, and ptarmigan. Raptors include bald and golden eagles, hawks

  16. 40 CFR 40.115-1 - Construction.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Construction. 40.115-1 Section 40.115-1... DEMONSTRATION GRANTS § 40.115-1 Construction. May include the preliminary planning to determine the economic and... action necessary to the construction of a facility, the erection, acquisition, alteration,...

  17. Archaeological Investigations on the San Antonio Terrace, Vandenberg Air Force Base, California, in Connection with MX Facilities Construction.

    Science.gov (United States)

    1984-01-01

    terraces, beaches, streams) precluded such a treatment . Instead, color variability and collection of samples from distinctive beds at particular...Morris (1966), and a number of *damp and hirsute local shellfish collectors were consulted before compiling the list of common shellfish names in...Plumbing, Electri- cal, Construction Material, Fencing, Roofing, Flooring, Paint Interior Furnishings Lighting, Heating, Furniture, Window Treatment

  18. A Facile Construction of Eudesmanolide Denebutenolide via SmI2-catalyzed Rearrangement of an Enol Ester Epoxide

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A very convenient construction procedure of the a, b-unsaturated lactone has been carried out in 98% yield. SmI2 (10%) was used as catalyst for rearrangement of an enol ester epoxide of eudesmanolide sesquiterpene. The possible mechanism was also discussed.

  19. A Facile Construction of Eudesmanolide Denebutenolide via SmI2—catalyzed Rearrangement of an Enol Ester Epoxide

    Institute of Scientific and Technical Information of China (English)

    WuJiongXIA; AoChengCAO; 等

    2002-01-01

    A very convenient construction procedure of the α,β-unsaturated lactone has been carried out in 98% yield. SmI2 (10%) was used as catalyst for rearrangement of an enol ester exoxide of eudesmanolide sesquiterpene. The possible mechanism was also discussed.

  20. New radiation protection calibration facility at CERN.

    Science.gov (United States)

    Brugger, Markus; Carbonez, Pierre; Pozzi, Fabio; Silari, Marco; Vincke, Helmut

    2014-10-01

    The CERN radiation protection group has designed a new state-of-the-art calibration laboratory to replace the present facility, which is >20 y old. The new laboratory, presently under construction, will be equipped with neutron and gamma sources, as well as an X-ray generator and a beta irradiator. The present work describes the project to design the facility, including the facility placement criteria, the 'point-zero' measurements and the shielding study performed via FLUKA Monte Carlo simulations.

  1. Construction of expressing vectors including melanoma differentiation-associated gene-7 (mda-7 fused with the RGD sequences for better tumor targeting

    Directory of Open Access Journals (Sweden)

    Mahboobeh Khodadad

    2015-08-01

    Conclusion: Theoretically RGD tagged mda-7 would be able to induce apoptosis with more specificity and stronger than the standard one, therefore, these new constructs may have the potential for further researches.

  2. Application mode construction of internet of things (IOT) for facility agriculture in Beijing%北京市设施农业物联网应用模式构建

    Institute of Scientific and Technical Information of China (English)

    阎晓军; 王维瑞; 梁建平

    2012-01-01

    该文围绕北京市农产品质量安全和生态环境安全问题,结合北京市“菜篮子”工程要求,按照设施农业产前、产中、产后全产业链条,采用生物、传感器、无线通信和自动化控制等技术,研究构建符合北京市设施农业现状和发展需求的物联网应用模式,主要包括利用具有自主知识产权的物联网技术,建设基于设施农业的感知环境,搭建低成本无线自组织传输网络,建设北京设施农业物联网云服务平台、智能决策服务和反馈控制系统,实现病虫害远程诊断、监控预警、指挥决策,实现肥、水、药智能控制和设施农产品质量安全监管与追溯等,并制定出配套的相关技术标准,为中国设施农业物联网技术标准制定提供参考.北京市设施农业物联网应用模式的成功构建将为国内外其他地区设施农业物联网体系建设提供可借鉴模式.%Focusing on the issues on the quality and safety of agricultural products and ecological environment safety in Beijing, with the " shopping basket " program requirements of the Beijing government, in accordance with the whole industrial chain of facilities agriculture which includes before/during/post producing, by using technologies of biological, sensor, wireless communication and automatic control so on, the application pattern of IOT was constructed in the needs of the current situation and development of the facility agriculture in Beijing. Mainly using IOT technology with independent intellectual property rights, the perception environment, low cost wireless self-organized network, cloud services platform, intelligent decision-making service and feedback control system were constructed were based on facility agricultural IOT in Beijing, realizing remote diagnosis, monitor and early warning, command decision about the diseases and pests, intelligence control of fertilizer / water / drug, quality and safety supervision and tracing about

  3. Asian Facilities

    Science.gov (United States)

    Nakahata, M.

    2011-04-01

    Asian underground facilities are reviewed. The YangYang underground Laboratory in Korea and the Kamioka observatory in Japan are operational and several astrophysical experiments are running. Indian Neutrino Observatory(INO) and China JinPing Underground Laboratory (CJPL) are under construction and underground experiments are being prepared. Current activities and future prospects at those underground sites are described.

  4. Construction of. gamma pi. /sup 0/ spectrometer and photon tagging facility at Bates Linear Accelerator. Final report, July 31, 1979-July 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Booth, E.C.

    1981-08-01

    The funds provided under Contract No. DE-AC02-79ER10486 were totally expended for hardware and supplies required by two related devices at the Bates Linear Accelerator. These were a photon tagging facility and a ..gamma pi../sup 0/ spectrometer in Beam Line C of the new South Experimental Hall. Construction was begun in November of 1979 and both systems became fully operational in the summer of 1981. Preliminary data was taken in 1980 with a prototype ..gamma pi../sup 0/ spectrometer will be carried out in the fall of 1981 and spring of 1982. The photon tagging system has been used successfully to calibrate the ..gamma pi../sup 0/ spectrometer for the BU - MIT collaboration and to test a lead glass detector system for Brandeis University.

  5. Issues related to the construction and operation of a geological disposal facility for nuclear fuel waste in crystalline rock - the Canadian experience

    Energy Technology Data Exchange (ETDEWEB)

    Allan, C.J.; Baumgartner, P.; Ohta, M.M.; Simmons, G.R.; Whitaker, S.H

    1997-12-01

    The siting, design, construction, operation, decommissioning, and closure of a geological facility for the disposal of nuclear fuel waste is a complex undertaking that will span many decades. Both technical and social issues must be taken into account simultaneously and many factors must be considered. Based on studies carried out in Canada and elsewhere, it appears that these factors can be accommodated and that geological disposal is both technically and socially feasible. But throughout the different stages of implementing disposal, technical and social issues will continue to arise and these will have to be dealt with successfully if progress is to continue. This paper discusses these issues and a proposed approach for dealing with them. (author)

  6. Pavement Testing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Comprehensive Environmental and Structural Analyses The ERDC Pavement Testing Facility, located on the ERDC Vicksburg campus, was originally constructed to provide...

  7. Pavement Testing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Comprehensive Environmental and Structural AnalysesThe ERDC Pavement Testing Facility, located on the ERDC Vicksburg campus, was originally constructed to provide an...

  8. Construction of New Energetics Buildings at the High Explosive Research and Development Facility (HERD) Final Environmental Assessment

    Science.gov (United States)

    2003-06-01

    comprise the understory (U.S. Air Force, 1995). Some of the dominant plant families include the sunflower (Asteraceae), milkweed (Asclepiadaceae), sedge ... Cyperaceae ), heath (Ericaceae), pea (Fabaceae), grass (Poaceae or Gramineae), buckwheat (Polygonaceae), and the yellow-eyed grass (Xyridaceae

  9. Construction of Prokaryotic Expression Plasmid of Fusion Protein Including Porin A and Porin B of Neisseria Gonorrhoeae and Its Expression in E.coli

    Institute of Scientific and Technical Information of China (English)

    廖芳; 宋启发; 万沐芬

    2004-01-01

    In order to provide a rational research basis for clinical detection and genetic engineering vaccine, plasmid pET-28a (+) encoding both Porin gene PIA and PIB of Neisseria gonorrhoeae was constructed and a fusion protein in E. coli DE3 expressed. The fragments of PIA and PIB gene of Neisseria gonorrhoeae were amplified and cloned into prokaryotic expression plasmid pET-28a (+) with double restriction endonuclease cut to construct recombinant pET-PIB-PIA. The recombinant was verified with restriction endonuclease and sequenced and transformed into E. coli DE3 to express the fusion protein PIB-PIA after induced with IPTG. The results showed PIA-PIB fusion DNA fragment was proved correct through sequencing. A 67 kD (1 kD=0. 992 1 ku) fusion protein had been detected by SDS-PAGE. It was concluded that the fusion protein was successively expressed.

  10. National Ignition Facility site requirements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The Site Requirements (SR) provide bases for identification of candidate host sites for the National Ignition Facility (NIF) and for the generation of data regarding potential actual locations for the facilities. The SR supplements the NIF Functional Requirements (FR) with information needed for preparation of responses to queries for input to HQ DOE site evaluation. The queries are to include both documents and explicit requirements for the potential host site responses. The Sr includes information extracted from the NIF FR (for convenience), data based on design approaches, and needs for physical and organization infrastructure for a fully operational NIF. The FR and SR describe requirements that may require new construction or may be met by use or modification of existing facilities. The SR do not establish requirements for NIF design or construction project planning. The SR document does not constitute an element of the NIF technical baseline.

  11. The use of ‘ecological risk‘ for assessing effects of human activities: an example including eutrophication and offshore wind farm construction in the North Sea

    Directory of Open Access Journals (Sweden)

    C. Nunneri

    2008-07-01

    Full Text Available This paper takes the move from the uncertainty surrounding ecosystem thresholds and addresses the issue of ecosystem-state assessment by means of ecological integrity indicators and ‘ecological risk‘. The concept of ‘ecological risk‘ gives a measure of the likelihood of ecosystem failure to provide the level of natural ecological goods and services expected/desired by human societies. As a consequence of human pressures (use of resources and discharge into the environment, ecosystem thresholds can be breached thus resulting in major threats to human health, safety and well-being. In this study we apply the concept of ‘ecological risk‘ to two case-studies in the German exclusive economic zone: eutrophication and construction of offshore wind farms. The effects of different future scenarios for single-uses upon ecosystem integrity are analysed as well as the effects of one combined scenario. We conclude that in the short term construction of offshore wind farms can influence some processes to a much larger degree than eutrophication, however, combined impacts deriving from eutrophication and offshore wind farm construction need a more detailed analysis. Due to non-linear ecosystem processes, effects of combined or multiple uses of marine resources in terms of ‘ecological risk‘, cannot be extrapolated from single-use scenarios.

  12. Information Construction of Facility Management of Holding-type Properties%持有型物业运营管理的信息化建设研究

    Institute of Scientific and Technical Information of China (English)

    冯丹; 陆惠民

    2012-01-01

    国内房地产宏观调控的力度不断加大使得开发商们开始调整优化企业资产结构,加大持有物业的比例。本文结合当前房地产企业的发展形势,对把握持有型物业现代运营管理的核心内容进行了阐述,并在此基础上对持有型物业运营管理的信息化建设进行了分析,主要从BIM—FM团队的组建、运营战略的规划以及BIM应用环境的构建三个方面进行详述。%The large intensity of macroeconomic regulation and control of the domestic real estate urges developers to adjust and optimize the structure of corporate assets, thus result in the increasing proportion of holding-type properties. Combined with the current situation of the development of the real estate business, this paper describes the core contents of the facility management of holding-type properties and analyzes the information construction process based on these knowledge identified. Three aspects are detailed concluding the organization of BIM-FM management team, the planning of operation strategies and the construction of BIM application environment.

  13. Polyphenol-Inspired Facile Construction of Smart Assemblies for ATP- and pH-Responsive Tumor MR/Optical Imaging and Photothermal Therapy.

    Science.gov (United States)

    Song, Xiao-Rong; Li, Shi-Hua; Dai, Jiayong; Song, Liang; Huang, Guoming; Lin, Ruhui; Li, Juan; Liu, Gang; Yang, Huang-Hao

    2017-05-01

    Smart assemblies have attracted increased interest in various areas, especially in developing novel stimuli-responsive theranostics. Herein, commercially available, natural tannic acid (TA) and iron oxide nanoparticles (Fe3 O4 NPs) are utilized as models to construct smart magnetic assemblies based on polyphenol-inspired NPs-phenolic self-assembly between NPs and TA. Interestingly, the magnetic assemblies can be specially disassembled by adenosine triphosphate, which shows a stronger affinity to Fe3 O4 NPs than that of TA and partly replaces the surface coordinated TA. The disassembly can further be facilitated by the acidic environment hence causing the remarkable change of the transverse relaxivity and potent "turn-on" of fluorescence (FL) signals. Therefore, the assemblies for specific and sensitive tumor magnetic resonance and FL dual-modal imaging and photothermal therapy after intravenous injection of the assemblies are successfully employed. This work not only provides understandings on the self-assembly between NPs and polyphenols, but also will open new insights for facilely constructing versatile assemblies and extending their biomedical applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Environmental Assessment - Construct a Ground-to-Air Transmitter and Receiver (GATR) Facility at Grand Forks Air Force Base

    Science.gov (United States)

    2006-06-06

    for wildlife in Grand Forks County. Pastures, meadows, and other non- cultivated areas create a prairie-land mosaic of grasses, legumes, and wild... alfalfa . Herbaceous plants include little bluestem, goldenrod, green needle grass, western wheat grass, and bluegrama. Shrubs such as Juneberry...consists primarily of cultivated crops with remaining land used for pasture and hay, urban development, recreation, and wildlife habitat. Principal

  15. Ecological studies related to the construction of the Defense Waste Processing Facility on the Savannah River Site. Annual report, FY-1994 and FY-1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The Savannah River Ecology Laboratory initiated ecological studies related to the construction of the DWPF on the SRS in FY-1979. Two areas have been used for biological surveys and long-term monitoring: the DWPF construction site (S-Area and Z-Area), and two control sites (Rainbow Bay and Tinker Creek). The Rainbow Bay study area and S-Area are located within 5 km of each other on the SRS, and both once contained Carolina bays which were very similar ecologically. One goal of the SREL`s faunal studies is to compare the natural variation in amphibian populations at the Rainbow Bay control site to the variation observed at the human-altered site (Sun Bay, formerly on the DWPF construction site). Pre-construction biological surveys included data on vegetation, birds, mammals, amphibians, reptiles, fish and several invertebrate groups. No species on the Federal Endangered or Threatened lists were found on either site, but several plants and animals of threatened or special-concern status in South Carolina were present and the gopher frog (Rana areolata) currently is being considered for federal listing. Continuing studies are directed towards assessing construction impacts on the biota and towares modeling the effects of alteration of wetland hydroperiod on the biota. Primary emphasis is being paced on evaluation the effectiveness of mitigation measures undertaken by DOE.

  16. 竞争型公共设施区位决策--概念、选址原则及模型构建%Competitive Public Facilities Location Decision:Concept, Location Selection Principle and Model Construction

    Institute of Scientific and Technical Information of China (English)

    宋正娜

    2016-01-01

    竞争型公共设施竞争性、公益性并存,其区位决策相对更加复杂。首先提出了“竞争型公共设施”的概念,指出“兼顾效率与公平的空间均衡”是其选址的基本原则,并概括出具体选址要求:遵循供需双方的空间相互作用模式、限制至邻近设施的最大出行成本、追求总出行成本最小化、约束设施规模门槛、与低层级设施在出行成本上相区分等。其次构建了基于概率分配规则的重力P中值模型,通过纳入设施规模因子实现区位和规模同步求解,并对邻近设施最大出行成本和设施最小规模进行约束,以实现空间公平-效率、服务质量公平与规模效率等多重目标。最后经过实证检验,优化后的设施布局更为均衡合理。%Competitive public facilities are both public-welfare and competitive, among them the comprehen-sive hospitals are most representative. Their location decision is relatively more complicated. This study aims to solve the problem that how to seek the optimal locations of such facilities. First of all, this study puts for-ward the concept of“competitive public facilities”which had been not defined systematically and normatively, pointed out that“the spatial equilibrium to coordinate the efficiency and equity”is the basic principle in loca-tion selection of competitive public facilities, and summarized a series of location requirements that they are to abide by the spatial interaction between the supply and demand, to limit the extreme travel cost from the settle-ment to the nearest facilities, to minimize the weighted total travel cost, to restrain the facility scale threshold, and to distinguish appropriately in spatial distribution between the higher level competitive public facilities and the ones. Secondly, gravity P median model was constructed with the probability distribution to replace the proximity rule by embedding the improved Huff probability model

  17. Final Environmental Assessment for Proposed Construction of New and Updated Training Facilities at Maxwell Air Force Base

    Science.gov (United States)

    2008-10-01

    However, several large companies , including Hyundai Motors , have opened factories in the Montgomery area since 2000, contributing additional...4,300 4. Hyundai Motor Manufacturing Alabama, LLC 3,171 5. Alfa Insurance Companies 2,568 6. City of Montgomery 2,500 7. 754th Electronics Systems...is a major distribution center for the southeast, supporting large companies such as Russell Corporation, and Consolidated Stores. The Information

  18. Environmental Assessment for Demolition and Construction of Military Personnel Support Facilities Kirtland Air Force Base, New Mexico

    Science.gov (United States)

    2010-07-01

    implement NEPA (40 CFR 1500–1508) that include provisions for both the content and procedural aspects of the required environ- mental analysis. The Air...the NM SALUD program or the national cap of 10 percent Health and Human Services is considering. We remain fully accountable to the federal...heritage beginning with the state’s Pueblos and early European settlers along El Camino Real; provides our river communities free environ- mental

  19. Health Facilities

    Science.gov (United States)

    Health facilities are places that provide health care. They include hospitals, clinics, outpatient care centers, and specialized care centers, such as birthing centers and psychiatric care centers. When you ...

  20. Risk management technique for liquefied natural gas facilities

    Science.gov (United States)

    Fedor, O. H.; Parsons, W. N.

    1975-01-01

    Checklists have been compiled for planning, design, construction, startup and debugging, and operation of liquefied natural gas facilities. Lists include references to pertinent safety regulations. Methods described are applicable to handling of other hazardous materials.

  1. Pressurized burner test facility

    Energy Technology Data Exchange (ETDEWEB)

    Maloney, D.J.; Norton, T.S.; Hadley, M.A.

    1993-09-01

    The US Department of Energy`s METC has recently completed construction and commissioning of a new high-pressure combustion research facility. Utilities servicing the facility enable combustion tests at scales up to 3 MW (10 MM Btu/h) and pressures in excess of 3000 kPa (30 atm). These include a preheated, high-pressure air supply that can deliver up to 1.7 kg/s (3.7 lbs/s) of combustion air, and a high-pressure, natural gas compressor that can deliver 0.8 kg/s (.19 lbs/s). In the summer of 1994 METC`s syngas generator is scheduled to come on line, at which time combustion tests on a range of fuel gases from low to medium to high heating values will be possible. The syngas generator will simulate a range of fuel gas compositions characteristic of coal gasification product streams. As part of the combustion facility, a high-pressure burner test facility is currently being constructed to support the development of gas turbine combustion systems fired on natural gas and coal-derived gaseous fuels containing fuel-bound nitrogen. The facility, illustrated in Figure 1, is a 61-centimeter (24-inch) diameter, refractory-lined vessel of modular construction, offering the flexibility to test a variety of NO{sub x} control concepts. Burner test modules are sandwiched between gas inlet and sampling plenums with a maximum combustion test zone of 2.2 m (90 inches) in length. Modules are custom designed for specific burners.

  2. Biological assessment of the effects of construction and operation of adepleted uranium hexafluoride conversion facility at the Portsmouth, Ohio,site.

    Energy Technology Data Exchange (ETDEWEB)

    Van Lonkhuyzen, R.

    2005-09-09

    The U.S. Department of Energy (DOE) Depleted Uranium Hexafluoride (DUF{sub 6}) Management Program evaluated alternatives for managing its inventory of DUF{sub 6} and issued the ''Programmatic Environmental Impact Statement for Alternative Strategies for the Long-Term Management and Use of Depleted Uranium Hexafluoride'' (DUF{sub 6} PEIS) in April 1999 (DOE 1999). The DUF{sub 6} inventory is stored in cylinders at three DOE sites: Paducah, Kentucky; Portsmouth, Ohio; and East Tennessee Technology Park (ETTP), near Oak Ridge, Tennessee. In the Record of Decision for the DUF{sub 6} PEIS, DOE stated its decision to promptly convert the DUF{sub 6} inventory to a more stable chemical form. Subsequently, the U.S. Congress passed, and the President signed, the ''2002 Supplemental Appropriations Act for Further Recovery from and Response to Terrorist Attacks on the United States'' (Public Law No. 107-206). This law stipulated in part that, within 30 days of enactment, DOE must award a contract for the design, construction, and operation of a DUF{sub 6} conversion plant at the Department's Paducah, Kentucky, and Portsmouth, Ohio, sites, and for the shipment of DUF{sub 6} cylinders stored at ETTP to the Portsmouth site for conversion. This biological assessment (BA) has been prepared by DOE, pursuant to the National Environmental Policy Act of 1969 and the Endangered Species Act of 1974, to evaluate potential impacts to federally listed species from the construction and operation of a conversion facility at the DOE Portsmouth site. The Indiana bat is known to occur in the area of the Portsmouth site and may potentially occur on the site during spring or summer. Evaluations of the Portsmouth site indicated that most of the site was found to have poor summer habitat for the Indiana bat because of the small size, isolation, and insufficient maturity of the few woodlands on the site. Potential summer habitat for the Indiana bat was

  3. National Biomedical Tracer Facility: Project definition study

    Energy Technology Data Exchange (ETDEWEB)

    Heaton, R.; Peterson, E. [Los Alamos National Lab., NM (United States); Smith, P. [Smith (P.A.) Concepts and Designs (United States)

    1995-05-31

    The Los Alamos National Laboratory is an ideal institution and New Mexico is an ideal location for siting the National Biomedical Tracer Facility (NBTF). The essence of the Los Alamos proposal is the development of two complementary irradiation facilities that combined with our existing radiochemical processing hot cell facilities and waste handling and disposal facilities provide a low cost alternative to other proposals that seek to satisfy the objectives of the NBTF. We propose the construction of a 30 MeV cyclotron facility at the site of the radiochemical facilities, and the construction of a 100 MeV target station at LAMPF to satisfy the requirements and objectives of the NBTF. We do not require any modifications to our existing radiochemical processing hot cell facilities or our waste treatment and disposal facilities to accomplish the objectives of the NBTF. The total capital cost for the facility defined by the project definition study is $15.2 M. This cost estimate includes $9.9 M for the cyclotron and associated facility, $2.0 M for the 100 MeV target station at LAMPF, and $3.3 M for design.

  4. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D. [BA-PIRC, Cocoa, FL (United States); McIlvaine, J. [BA-PIRC, Cocoa, FL (United States); Fonorow, K. [BA-PIRC, Cocoa, FL (United States); Martin, E. [BA-PIRC, Cocoa, FL (United States)

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces.

  5. Biological assessment of the effects of construction and operation of a depleted uranium hexafluoride conversion facility at the Paducah, Kentucky, site.

    Energy Technology Data Exchange (ETDEWEB)

    Van Lonkhuyzen, R.

    2005-09-09

    The U.S. Department of Energy (DOE) Depleted Uranium Hexafluoride (DUF{sub 6}) Management Program evaluated alternatives for managing its inventory of DUF{sub 6} and issued the ''Programmatic Environmental Impact Statement for Alternative Strategies for the Long-Term Management and Use of Depleted Uranium Hexafluoride'' (DUF{sub 6} PEIS) in April 1999 (DOE 1999). The DUF{sub 6} inventory is stored in cylinders at three DOE sites: Paducah, Kentucky; Portsmouth, Ohio; and East Tennessee Technology Park (ETTP), near Oak Ridge, Tennessee. In the Record of Decision for the DUF{sub 6} PEIS, DOE stated its decision to promptly convert the DUF6 inventory to a more stable chemical form. Subsequently, the U.S. Congress passed, and the President signed, the ''2002 Supplemental Appropriations Act for Further Recovery from and Response to Terrorist Attacks on the United States'' (Public Law No. 107-206). This law stipulated in part that, within 30 days of enactment, DOE must award a contract for the design, construction, and operation of a DUF{sub 6} conversion plant at the Department's Paducah, Kentucky, and Portsmouth, Ohio, sites, and for the shipment of DUF{sub 6} cylinders stored at ETTP to the Portsmouth site for conversion. This biological assessment (BA) has been prepared by DOE, pursuant to the National Environmental Policy Act of 1969 (NEPA) and the Endangered Species Act of 1974, to evaluate potential impacts to federally listed species from the construction and operation of a conversion facility at the DOE Paducah site.

  6. Water Activities in Laxemar Simpevarp. Clab/encapsulation facility (Clink) - removal of groundwater, collection of cooling water from the sea and the construction of day water pond; Vattenverksamhet i Laxemar-Simpevarp. Clab/inkapslingsanlaeggning (Clink) - bortledande av grundvatten, uttag av kylvatten fraan havet samt anlaeggande av dagvattendamm

    Energy Technology Data Exchange (ETDEWEB)

    Werner, Kent (EmpTec (Sweden))

    2010-09-15

    This report is an appendix to an Environmental Impact Assessment that accompanies a permit application according to the Swedish Environmental Code. The report concerns water operations (Chapter 11 in the Environmental Code) associated with construction of an encapsulation plant in direct connection to SKB's existing Clab facility on the Simpevarp peninsula in the Municipality of Oskarshamn (the report is also included in the permit application according to the Nuclear Activities Act). Moreover, the report deals with water operations associated with the operation of the integrated facility, which is named Clink. Specifically, the water operations that are treated in the report include diversion of groundwater, withdrawal of cooling water from the sea, and construction of a storm-water treatment pond. There are valid permits regarding diversion of groundwater and withdrawal of cooling water for the current facility and activities at Clab. It is presupposed that the cooling-water withdrawal from the sea to Clink can be handled within the limits of the valid Clab permit. The diversion of groundwater from Clink may be somewhat larger compared to the present diversion from Clab. The increase is due to a relatively small, additional rock shaft for the encapsulation plant, adjacent to the current surface facility and above one of the two existing rock caverns (Clab 1). Based on the location of the planned rock shaft (above one of the existing rock caverns) and its small volume, it is judged that the inflow of groundwater during operation of Clink will be only 5-10 percent larger compared to the inflow to the current Clab facility. It is possible that the inflow will be larger during the construction phase, prior to grouting of the shaft. Based on the limited increase of the groundwater inflow and results from the ongoing Clab monitoring programme, it is judged that the construction of the encapsulation plant and the operation of Clink will only lead to very small

  7. Airports and Airfields, Airstrip locations within Sedgwick County. Primary attributes include site number, location ID, facility type, effective date, air strip name, city name, latitude, longitude, and elevation., Published in 2008, 1:1200 (1in=100ft) scale, Sedgwick County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Airports and Airfields dataset current as of 2008. Airstrip locations within Sedgwick County. Primary attributes include site number, location ID, facility type,...

  8. TD-S-HF single determinantal reaction theory and the description of many-body processes, including fission. [Schroedinger equation, constructive analysis S matrix, review

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, J. J.; Lichtner, P. C.; Dworzecka, M.; Kan, K. K.

    1979-01-01

    The restrictions implied for the time dependent many-body reaction theory by the (TDHF) single determinantal assumption are explored by constructive analysis. A restructured TD-S-HF reaction theory is modelled, not after the initial-value form of the Schroedinger reaction theory, but after the (fully equivalent) S-matrix form, under the conditions that only self-consistent TDHF solutions occur in the theory, every wave function obeys the fundamental statistical interpretation of quantum mechanics, and the theory reduces to the exact Schroedinger theory for exact solutions which are single determinantal. All of these conditions can be accomodated provided that the theory is interpreted on a time-averaged basis, i.e., physical constants of the Schroedinger theory which are time-dependent in the TDHF theory, are interpreted in TD-S-HF in terms of their time averaged values. The resulting reaction theory, although formulated heuristically, prescribes a well defined and unambiguous calculational program which, although somewhat more demanding technically than the conventional initial-value TDHF method, is nevertheless more consonant with first principles, structurally and mechanistically. For its physical predictions do not depend upon the precise location of the distant measuring apparatus, and are in no way influenced by the spurious cross channel correlations which arise whenever the description of many reaction channels is imposed upon one single-determinantal solution. For nuclear structure physics, the TDHF-eigenfunctions provide the first plausible description of exact eigenstates in the time-dependent framework; moreover, they are unencumbered by any restriction to small amplitudes. 14 references.

  9. Phased Construction Completion Report for Building K-1401 of the Remaining Facilities Demolition Project at the East Tennessee Technology Park Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Garland S.

    2008-03-01

    This Phased Construction Completion Report documents the demolition of Bldg. K-1401, Maintenance Building, addressed in the Action Memorandum for the Remaining Facilities Demolition Project at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2003a) as a Comprehensive Environmental Response, Compensation, and Liability Act of 1980 non-time-critical removal action. The objectives of the removal action (DOE 2003a) - to eliminate the source of potential contamination, to eliminate the threat of potential future releases, and/or to eliminate the threats to the general public and the environment - were met. The end state of this action is for the slab to remain with all penetrations sealed and grouted or backfilled. The basement and pits remain open. There is residual radiological and polychlorinated biphenyl contamination on the slab and basement. A fixative was applied to the area on the pad contaminated with polychlorinated biphenyls. Interim land-use controls will be maintained until final remediation decisions are made under the Zone 2 Record of Decision (DOE 2005a).

  10. Phased Construction Completion Report for Bldg. K-1401 of the Remaining Facilities Demolition Project at the East Tennessee Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Jacobs

    2008-10-01

    This Phased Construction Completion Report documents the demolition of Bldg. K-1401, Maintenance Building, addressed in the Action Memorandum for the Remaining Facilities Demolition Project at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2003a) as a Comprehensive Environmental Response, Compensation, and Liability Act of 1980 non-time-critical removal action. The objectives of the removal action (DOE 2003a) - to eliminate the source of potential contamination, to eliminate the threat of potential future releases, and/or to eliminate the threats to the general public and the environment - were met. The end state of this action is for the slab to remain with all penetrations sealed and grouted or backfilled. The basement and pits remain open. There is residual radiological and polychlorinated biphenyl contamination on the slab and basement. A fixative was applied to the area on the pad contaminated with polychlorinated biphenyls. Interim land-use controls will be maintained until final remediation decisions are made under the Zone 2 Record of Decision (DOE 2005a).

  11. Systems analysis of a potential space manufacturing facility

    Science.gov (United States)

    Driggers, G. W.

    1977-01-01

    Results of a preliminary design study of the system elements comprising a manufacturing facility in earth orbit are presented. The elements discussed include cis-Lunar transportation, Lunar base, materials transport, factory, living facilities, construction support and energy supply. An evolutionary path of development, production and deployment is presented and step-wise interrelationships discussed.

  12. Idaho Waste Vitrification Facilities Project Vitrified Waste Interim Storage Facility

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, Bruce Edward

    2001-09-01

    This feasibility study report presents a draft design of the Vitrified Waste Interim Storage Facility (VWISF), which is one of three subprojects of the Idaho Waste Vitrification Facilities (IWVF) project. The primary goal of the IWVF project is to design and construct a treatment process system that will vitrify the sodium-bearing waste (SBW) to a final waste form. The project will consist of three subprojects that include the Waste Collection Tanks Facility, the Waste Vitrification Facility (WVF), and the VWISF. The Waste Collection Tanks Facility will provide for waste collection, feed mixing, and surge storage for SBW and newly generated liquid waste from ongoing operations at the Idaho Nuclear Technology and Engineering Center. The WVF will contain the vitrification process that will mix the waste with glass-forming chemicals or frit and turn the waste into glass. The VWISF will provide a shielded storage facility for the glass until the waste can be disposed at either the Waste Isolation Pilot Plant as mixed transuranic waste or at the future national geological repository as high-level waste glass, pending the outcome of a Waste Incidental to Reprocessing determination, which is currently in progress. A secondary goal is to provide a facility that can be easily modified later to accommodate storage of the vitrified high-level waste calcine. The objective of this study was to determine the feasibility of the VWISF, which would be constructed in compliance with applicable federal, state, and local laws. This project supports the Department of Energy’s Environmental Management missions of safely storing and treating radioactive wastes as well as meeting Federal Facility Compliance commitments made to the State of Idaho.

  13. Pre-reserving and Pre-burying Construction Management of Expressway Traffic Engineering Facility%高速公路交通工程设施预留预埋建设管理

    Institute of Scientific and Technical Information of China (English)

    彭洪涛; 王晨

    2012-01-01

      Pre-reserving and pre-burying of highway traffic engineering facilities usually constructed synchronously with the highway main body engineering, however, the traffic engineering equipment installation and cable laying construction project are relatively lag behind. Combined with the actual construction of highway, problems existing in traffic engineering facilities pre-reserving and pre-burying construction and their reasons were analyzed, and from angle of highway construction management corresponding proposals on design, construction and supervision etc. were put forward.%  高速公路交通工程设施预留预埋通常随公路主体工程同步施工,而交通工程设备安装及线缆敷设等施工项目在时间上相对滞后,文章结合高速公路实际建设情况,对交通工程设施预留预埋施工存在的问题及原因进行了分析,并从从高速公路建设管理角度对设计、施工、监理等环节提出相应建议。

  14. Surface Engineering Construction of Sichuan Natural Gas Industry

    Institute of Scientific and Technical Information of China (English)

    You Kaicheng

    1995-01-01

    @@ The Present Status of Surface Engineering Construction A comparatively integrate and systematic surface engineering system, including gas gathering, purification transportation and distribution facilities, which approaches the international technical level, has been established. (Fig. 1)

  15. 电动汽车充电设施建设方案浅谈%On Construction Schemes of Electric Vehicle Charging Facilities

    Institute of Scientific and Technical Information of China (English)

    张巍伟

    2015-01-01

    With the deepening of global energy crisis and the prevalence of air pollution and climate warming,the devel-opment and application of new energy are receivingmore and more attention. Governments and automobile makers have realized that energy saving and emission-reduction are the direction of future automotive technology and the development of electric vehicles is the best way to solve the problems. China has attached great importance on the development of electric vehicles,and has issued a series of policies and worked out many standards to support and standardize the industry. How-ever,the popularization of electric vehicles still has a long way to go. This paper discusses construction schemes of electric vehicle charging facilities from the aspects of charging stations and charging piles.%随着全球能源危机的不断加深,大气污染、气候变暖等危害的加剧,新能源的发展与应用越来越受到关注,各国政府及汽车企业普遍认识到节能和减排是未来汽车技术发展的方向,发展电动汽车将是解决上述难题的最佳途径.我国高度重视电动汽车的发展,相继出台了一系列政策标准来扶持和规范电动汽车的发展,但要实现电动汽车大面积普及还需要很长的时间.分别从充电站与充电桩两方面论述了电动汽车充电设施的建设方案.

  16. Corrective Action Investigation Plan for Corrective Action Unit 254: Area 25 R-MAD Decontamination Facility, Nevada Test Site, Nevada (includes ROTC No. 1, date 01/25/1999)

    Energy Technology Data Exchange (ETDEWEB)

    DOE/NV

    1999-07-29

    This Corrective Action Investigation Plan contains the US Department of Energy, Nevada Operations Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 254 under the Federal Facility Agreement and Consent Order. Corrective Action Unit 254 consists of Corrective Action Site (CAS) 25-23-06, Decontamination Facility. Located in Area 25 at the Nevada Test Site (NTS), CAU 254 was used between 1963 through 1973 for the decontamination of test-car hardware and tooling used in the Nuclear Rocket Development Station program. The CAS is composed of a fenced area measuring approximately 119 feet by 158 feet that includes Building 3126, an associated aboveground storage tank, a potential underground storage area, two concrete decontamination pads, a generator, two sumps, and a storage yard. Based on site history, the scope of this plan is to resolve the problem statement identified during the Data Quality Objectives process that decontamination activities at this CAU site may have resulted in the release of contaminants of concern (COCs) onto building surfaces, down building drains to associated leachfields, and to soils associated with two concrete decontamination pads located outside the building. Therefore, the scope of the corrective action field investigation will involve soil sampling at biased and random locations in the yard using a direct-push method, scanning and static radiological surveys, and laboratory analyses of all soil/building samples. Historical information provided by former NTS employees indicates that solvents and degreasers may have been used in the decontamination processes; therefore, potential COCs include volatile/semivolatile organic compounds, Resource Conservation and Recovery Act metals, petroleum hydrocarbons, polychlorinated biphenyls, pesticides, asbestos, gamma-emitting radionuclides, plutonium, uranium, and strontium-90. The results of this

  17. Indoor Lighting Facilities

    Science.gov (United States)

    Matsushima, Koji; Saito, Yoshinori; Ichikawa, Shigenori; Kawauchi, Takao; Tanaka, Tsuneo; Hirano, Rika; Tazuke, Fuyuki

    According to the statistics by the Ministry of Land, Infrastructure and Transport, the total floor space of all building construction started was 188.87 million m2 (1.5% increase y/y), marking the fourth straight year of increase. Many large-scale buildings under construction in central Tokyo become fully occupied by tenants before completion. As for office buildings, it is required to develop comfortable and functional office spaces as working styles are becoming more and more diversified, and lighting is also an element of such functionalities. The total floor space of construction started for exhibition pavilions, multipurpose halls, conference halls and religious architectures decreased 11.1% against the previous year. This marked a decline for 10 consecutive years and the downward trend continues. In exhibition pavilions, the light radiation is measured and adjusted throughout the year so as not to damage the artworks by lighting. Hospitals, while providing higher quality medical services and enhancing the dwelling environment of patients, are expected to meet various restrictions and requirements, including the respect for privacy. Meanwhile, lighting designs for school classrooms tend to be homogeneous, yet new ideas are being promoted to strike a balance between the economical and functional aspects. The severe economic environment continues to be hampering the growth of theaters and halls in both the private and public sectors. Contrary to the downsizing trend of such facilities, additional installations of lighting equipment were conspicuous, and the adoption of high efficacy lighting appliances and intelligent function control circuits are becoming popular. In the category of stores/commercial facilities, the construction of complex facilities is a continuing trend. Indirect lighting, high luminance discharge lamps with excellent color rendition and LEDs are being effectively used in these facilities, together with the introduction of lighting designs

  18. Idaho CERCLA Disposal Facility Complex Compliance Demonstration for DOE Order 435.1

    Energy Technology Data Exchange (ETDEWEB)

    Simonds, J.

    2007-11-06

    This compliance demonstration document provides an analysis of the Idaho CERCLA Disposal Facility (ICDF) Complex compliance with DOE Order 435.1. The ICDF Complex includes the disposal facility (landfill), evaporation pond, administration facility, weigh scale, and various staging/storage areas. These facilities were designed and constructed to be compliant with DOE Order 435.1, Resource Conservation and Recovery act Subtitle C, and Toxic Substances Control Act polychlorinated biphenyl design and construction standards. The ICDF Complex is designated as the Idaho National Laboratory (INL) facility for the receipt, staging/storage, treatment, and disposal of INL Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) waste streams.

  19. Guide to research facilities

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

  20. Consolidated Incineration Facility model videotape

    Energy Technology Data Exchange (ETDEWEB)

    Krolewski, J F; Augsburger, S T

    1988-01-01

    A Consolidated Incineration Facility (CIF) is in final design for construction at the Savannah River Plant in Aiken, South Carolina. The CIF will detoxify and volume reduce combustible radioactive, hazardous and mixed waste. A study model was constructed during scope development for project authorization to assist with equipment layout and insure sufficient maintenance access. To facilitate the Department of Energy Validation process, a videotape of the model was developed. This ten minute videotape includes general information about the incineration process and a tour of the study model with a discussion of activities in each area. The videotape will be shown and the current status and schedule for the CIF presented.

  1. Facility Safeguardability Analysis In Support of Safeguards-by-Design

    Energy Technology Data Exchange (ETDEWEB)

    Philip Casey Durst; Roald Wigeland; Robert Bari; Trond Bjornard; John Hockert; Michael Zentner

    2010-07-01

    The following report proposes the use of Facility Safeguardability Analysis (FSA) to: i) compare and evaluate nuclear safeguards measures, ii) optimize the prospective facility safeguards approach, iii) objectively and analytically evaluate nuclear facility safeguardability, and iv) evaluate and optimize barriers within the facility and process design to minimize the risk of diversion and theft of nuclear material. As proposed by the authors, Facility Safeguardability Analysis would be used by the Facility Designer and/or Project Design Team during the design and construction of the nuclear facility to evaluate and optimize the facility safeguards approach and design of the safeguards system. Through a process of “Safeguards-by-Design” (SBD), this would be done at the earliest stages of project conceptual design and would involve domestic and international nuclear regulators and authorities, including the International Atomic Energy Agency (IAEA). The benefits of the Safeguards-by-Design approach is that it would clarify at a very early stage the international and domestic safeguards requirements for the Construction Project Team, and the best design and operating practices for meeting these requirements. It would also minimize the risk to the construction project, in terms of cost overruns or delays, which might otherwise occur if the nuclear safeguards measures are not incorporated into the facility design at an early stage. Incorporating nuclear safeguards measures is straight forward for nuclear facilities of existing design, but becomes more challenging with new designs and more complex nuclear facilities. For this reason, the facility designer and Project Design Team require an analytical tool for comparing safeguards measures, options, and approaches, and for evaluating the “safeguardability” of the facility. The report explains how preliminary diversion path analysis and the Proliferation Resistance and Physical Protection (PRPP) evaluation

  2. BIBLIOGRAPHY OF FACILITIES INFORMATION.

    Science.gov (United States)

    American Association of Junior Colleges, Washington, DC.

    PERSONNEL OF THE FACILITIES INFORMATION SERVICE OF THE AMERICAN ASSOCIATION OF JUNIOR COLLEGES COMPILED THIS LISTING OF BOOKS, ARTICLES, MONOGRAPHS, AND OTHER PRINTED MATERIALS RELEVANT TO JUNIOR COLLEGE FACILITIES PLANNING, DESIGN, AND CONSTRUCTION. IN ADDITION TO A "GENERAL" CATEGORY, REFERENCES ARE GROUPED UNDER HEADINGS OF AUDITORIUMS, COLLEGE…

  3. 18 CFR 35.25 - Construction work in progress.

    Science.gov (United States)

    2010-04-01

    ..., storing, or preventing the creation or emission of pollutants, contaminants, wastes or heat”; (B) Whether... included in Accounts 107 (construction work in progress) and 120.1 (nuclear fuel in process of refinement... facilities, and any facility needed for receiving and storing the fuel to which the plant is being converted...

  4. Application of system directions, facilities and methods of individualization preparation of sportsmen in playing types of sport in structural circannual loop of preparation constructs

    Directory of Open Access Journals (Sweden)

    Kozina Zh.l.

    2010-08-01

    Full Text Available Basic directions conception of individualization of training process are presented in playing types of sport. Distributing of facilities is rotined in individual programs of preparation of sportsmen. Depending on a leading factor and period of individual dynamics of playing effectiveness correlation of facilities varies. On development of leading factors 60-80% is taken to time, on development of backward - 20-40%. In every micro cycle 30% taken time on individual preparation of players.

  5. Facilities for US Radioastronomy.

    Science.gov (United States)

    Thaddeus, Patrick

    1982-01-01

    Discusses major developments in radioastronomy since 1945. Topics include proposed facilities, very-long-baseline interferometric array, millimeter-wave telescope, submillimeter-wave telescope, and funding for radioastronomy facilities and projects. (JN)

  6. ERDA test facilities, East Mesa Test Site. Geothermal resource investigations, Imperial Valley, California

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    Detailed specifications which must be complied with in the construction of the ERDA Test Facilities at the East Mesa Site for geothermal resource investigations in Imperial Valley, California are presented for use by prospective bidders for the construction contract. The principle construction work includes a 700 gpm cooling tower with its associated supports and equipment, pipelines from wells, electrical equipment, and all earthwork. (LCL)

  7. Noise and vibration issues in contemporary facilities

    Science.gov (United States)

    Evans, Jack B.

    2005-09-01

    Contemporary medical facilities, whether for diagnosis, treatment or research, must accommodate the needs of humans and medical instruments or equipment. With regard to acoustics, the disparate requirements vary from acoustic privacy to freedom from intrusive noise, to vibration control. Medical facilities also grow and change, subjecting occupants to demolition and construction disturbances. Acoustical criteria employed in building designs are often inadequate to control the full spectral range of requirements, although criteria for many conditions do exist. This paper presents interesting problems and conditions that occur in healthcare and research facilities with brief case studies to illustrate them, including construction disturbances, tonal noise affects on patients, privacy, and vibration and low frequency noise affects on medical equipment. Measurement data will contrast ambient versus disturbed conditions. Solution concepts to example problems will be presented with photo or drawing illustrations. Discussion will include typical conflicts, constraints, limitations and compromises. Concluding remarks will suggest application of appropriate and comprehensive acoustical, noise and vibration criteria.

  8. 城市防灾应急体系建构与应急设施布局研究%The urban disaster prevention and emergency control system construction and its facility planning

    Institute of Scientific and Technical Information of China (English)

    史怀昱; 姚卓; 汪洋; 杨琦; 王月英

    2011-01-01

    Aim To build a safe, efficient, orderly and humanized post-disaster urban disaster prevention and e-mergency control system, to study the layout of urban disaster prevention and emergency control facilities and to make sure that every rescue and resettlement task be executed successfully. Methods On the basis of classifying the urban disaster prevention and emergency control system, the basic principles and methods are discussed combined with the analogy analysis of related research both at home and abroad. Results Command system, rescue system, life system and security system are included in the urban disaster prevention and emergency control planning system. Ten basic principles of the urban disaster prevention and emergency control facilities' spatial planning layout and layout methods assisting by spatial information technology are raised in this paper. The urban disaster prevention and emergency control system and theoretical framework of the spatial layout of emergency control facilities are constructed initially. Conclusion The emergency response system and the layout of facilities for urban disaster prevention is to uphold the principles, which hold secarity, accesibility, grading layer by layer from outside to inside, combining centralization and decentralization and adhere to sustainable development.%目的 构建安全、高效、有序、人性化的灾后城市防灾应急体系,对城市防灾应急设施的规划布局进行研究,确保各项救援、安置工作顺利展开.方法 结合国内外相关研究进行类比分析,在对城市防灾应急体系分类的基础上,对防灾应急设施空间规划布局的基本原则和方法进行探讨.结果 城市防灾应急规划体系包括指挥体系、救援体系、生活体系、保障体系四大类,提出了城市应急防灾设施空间规划布局的10条基本原则和空间信息技术辅助的规划布局方法,初步构建了城市防灾应急体系和应急设施空间规划

  9. Bus Yards and Repair Facilities, Local Buildings - Bus shop is included in local buildings layer, Published in 2008, 1:2400 (1in=200ft) scale, Effingham County Board Of Commissioners.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Bus Yards and Repair Facilities dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Orthoimagery information as of 2008. It is...

  10. Prisons and Correctional Facilities, Local Building - buiding footprint is included in the local building layer, Published in 2008, 1:2400 (1in=200ft) scale, Effingham County Board Of Commissioners.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Prisons and Correctional Facilities dataset, published at 1:2400 (1in=200ft) scale, was produced all or in part from Orthoimagery information as of 2008. It is...

  11. Indoor Lighting Facilities

    Science.gov (United States)

    Matsushima, Koji; Saito, Yoshinori; Ichikawa, Shigenori; Kawauchi, Takao; Tanaka, Tsuneo; Hirano, Rika; Tazuke, Fuyuki

    According to the statistics on building construction floor area from the Ministry of Land, Infrastructure, Transport and Tourism, the total floor area of building construction started in Japan in 2007 was 160,991 thousand square meters, or 14.8% less than the area of the previous year, and the reduction was the first reduction in the past five years. The office markets in Tokyo and Nagoya were active, as represented by the supplies of skyscrapers, and energy saving measures, such as the adoption of high efficiency lighting equipment, the control for initial stage illuminance, daylight harvesting, and the use of occupancy sensors, were well established. In the field of public construction, including museums, multi-purpose halls, and religious buildings, the total area of the new construction was 10.8% less than the total for the previous year, and this reduction was a continuation of an eleven-year trend. In spaces with high ceiling, the innovation for easy replacement of light sources used with reflection mirror systems and optical fibers was noted. Hospitals adapted to the expectation for improved services in their selection of lighting facilities to improve the residential environment for patients while taking into consideration the needs of the aging population, by their use of devices in corridors to help maintain a continuity of light. In libraries, a pendant system was developed to illuminate both ceilings and book shelves. In the field of theaters and halls, the time limit for repairing existing systems had come for the large facilities that were opened during the theater and hall construction boom of the 1960s through 1980s, and around 26 renovations were done. Almost all the renovations were conversions to intelligent dimming systems and lighting control desks. In the field of stores and commercial facilities, the atmosphere and glitter of the selling floor was produced by new light sources, such as ceramic metal halide lamps and LEDs, which have high

  12. 芜湖城市社区体育设施建设现状的调查研究%Investigation and Study on Present Situation of Sports Facilities Construction in Wuhu City Community

    Institute of Scientific and Technical Information of China (English)

    朱敏; 席玉宝

    2012-01-01

    通过文献资料法、实地考察法、问卷调查法、访谈法等研究方法,对芜湖城市社区体育设施建设的现状进行了调查研究,分析了芜湖城市社区体育设施的分布特点、依据相关文件规定应配备的社区体育设施情况、社区体育设施数量缺额情况以及社区健身路径设施状况。结果显示:芜湖城市社区体育设施建设有91%社区集中于居民住宅区内;社区体育设施建设的类型分布比较广泛,但不同类型体育设施在芜湖城市社区的分布存在局部的不平衡;体育设施建设的场地面积比较规范,但体育设施的数量严重不足;健身路径对于严重缺失的芜湖城市社区体育设施是较好的补充,但是体彩收益金的返还率过低,健身路径的数量有待提高。%In this paper, with the methods of documentary, investigation, questionnaire survey, interviews and other research ones, investigation and study have been made on the present situation of sports facilities construction in Wuhu city community. The locations' characteristics of sports facilities in Wuhu city community, the community sports facilities that should be equipped with according to the provisions of relevant documents, community sports fadlities quantity shortage situation and the community fimess route fadlities have been analyzed. The results showed that: there are 91% of sports facilities construction in the residential area of Wuhu city community; and that community sports facilities construction have broad distributions in type, but different types of sports facilities are of partial im[~alanced in Wuhu city community; and that construction of sports facilities in the field area is relatively standardized, but the number of sports facilities is seriously insufficient; and that fitness path for the serious lack of sports facilities in Wuhu city community is a good supplement, but the return rate from lottery proceeds is too low

  13. Research Progress and Construction Practice of Urban Elderly Public Service Facilities%国内城市老年公共服务设施建设研究进展

    Institute of Scientific and Technical Information of China (English)

    沈山; 胡庭浩; 栾阿诗

    2014-01-01

    在国内,以城市为尺度的老年公共服务设施建设研究仍处于起步阶段。在梳理我国城市老年公共服务设施的概念、相关国家标准的基础上,从城乡规划学以及人口学和社会学、地理学、建筑学、风景园林学视角对国内文献进行整理归纳,我国城市老年公共服务设施在概念、规划规范、建设内容、运营机制、配置理念研究上仍需探索。%In the domestic, the study on the construction of elderly public service facilities in urban-scale is still in its infancy. On the basis of carding the concept of urban elderly public service facilities, relevant codes and standards, this paper generalizes the domestic research from the aspects of urban and rural planning, demography and sociology, geography, architecture and landscape architecture. The research of urban elderly public service facilities still needs exploration and research on the aspects of concept, planning standards, construction contents, operation mechanism and conifguration ideas.

  14. Environmental assessment for the proposed construction and operation of a Genome Sequencing Facility in Building 64 at Lawrence Berkeley Laboratory, Berkeley, California

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    This document is an Environmental Assessment (EA) for a proposed project to modify 14,900 square feet of an existing building (Building 64) at Lawrence Berkeley Laboratory (LBL) to operate as a Genome Sequencing Facility. This EA addresses the potential environmental impacts from the proposed modifications to Building 64 and operation of the Genome Sequencing Facility. The proposed action is to modify Building 64 to provide space and equipment allowing LBL to demonstrate that the Directed DNA Sequencing Strategy can be scaled up from the current level of 750,000 base pairs per year to a facility that produces over 6,000,000 base pairs per year, while still retaining its efficiency.

  15. Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE): Conceptual Design Report. Volume 3: Long-Baseline Neutrino Facility for DUNE

    Energy Technology Data Exchange (ETDEWEB)

    Strait, James [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); McCluskey, Elaine [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Lundin, Tracy [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Willhite, Joshua [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Hamernik, Thomas [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Papadimitriou, Vaia [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Marchionni, Alberto [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Kim, Min Jeong [National Inst. of Nuclear Physics (INFN), Frascati (Italy). National Lab. of Frascati (INFN-LNF); Nessi, Marzio [Univ. of Geneva (Switzerland); Montanari, David [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Heavey, Anne [Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States)

    2016-01-21

    This volume of the LBNF/DUNE Conceptual Design Report covers the Long-Baseline Neutrino Facility for DUNE and describes the LBNF Project, which includes design and construction of the beamline at Fermilab, the conventional facilities at both Fermilab and SURF, and the cryostat and cryogenics infrastructure required for the DUNE far detector.

  16. Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 3: Long-Baseline Neutrino Facility for DUNE June 24, 2015

    CERN Document Server

    Strait, James; Lundin, Tracy; Willhite, Joshua; Hamernik, Thomas; Papadimitriou, Vaia; Marchionni, Alberto; Kim, Min Jeong; Nessi, Marzio; Montanari, David; Heavey, Anne

    2016-01-01

    This volume of the LBNF/DUNE Conceptual Design Report cover the Long-Baseline Neutrino Facility for DUNE and describes the LBNF Project, which includes design and construction of the beamline at Fermilab, the conventional facilities at both Fermilab and SURF, and the cryostat and cryogenics infrastructure required for the DUNE far detector.

  17. Final Environmental Assessment, Construct Antenna Parts Storage Facility, Upgrade Perimeter Security Fence and Demolish Camera Shed, Red River Air Force Space Surveillance Station (AFSSS), Lewisville, Arkansas

    Science.gov (United States)

    2012-11-01

    Demolition of Shed 3-7 3.3.1 Vegetation Prior to construction of the Installation, the land supported a hardwood forest . The forest was cleared and...the land was covered with a hardwood forest . The land was cleared and root plowed dur- ing construction of the Installation. Earthen platforms were...split bdrms, lg pnvacv fenced back yard, granite on bar in kit. maple cabinets, handiCapped assess1ble. Call Penny 0 Prime Real Estate Properties

  18. Establishment of Biosafety Level-3 (BSL-3 laboratory: Important criteria to consider while designing, constructing, commissioning & operating the facility in Indian setting

    Directory of Open Access Journals (Sweden)

    Devendra T Mourya

    2014-01-01

    This article describes the major steps involved in the process of construction of a BSL-3 laboratory in Indian settings, from freezing the concept of proposal to operationalization phase. The key to success of this kind of project is strong institutional commitment to biosafety norms, adequate fund availability, careful planning and designing, hiring good construction agency, monitoring by experienced consultancy agency and involvement of scientific and engineering personnel with biocontainment experience in the process.

  19. Material selection for Multi-Function Waste Tank Facility tanks

    Energy Technology Data Exchange (ETDEWEB)

    Larrick, A.P.; Blackburn, L.D.; Brehm, W.F.; Carlos, W.C.; Hauptmann, J.P. [Westinghouse Hanford Co., Richland, WA (United States); Danielson, M.J.; Westerman, R.E. [Pacific Northwest Lab., Richland, WA (United States); Divine, J.R. [ChemMet Ltd., West Richland, WA (United States); Foster, G.M. [ICF Kaiser Hanford Co., Richland, WA (United States)

    1995-03-01

    This paper briefly summarizes the history of the materials selection for the US Department of Energy`s high-level waste carbon steel storage tanks. It also provides an evaluation of the materials for the construction of new tanks at the evaluation of the materials for the construction of new tanks at the Multi-Function Waste Tank Facility. The evaluation included a materials matrix that summarized the critical design, fabrication, construction, and corrosion resistance requirements: assessed. each requirement: and cataloged the advantages and disadvantages of each material. This evaluation is based on the mission of the Multi-Function Waste Tank Facility. On the basis of the compositions of the wastes stored in Hanford waste tanks, it is recommended that tanks for the Multi-Function Waste Tank Facility be constructed of ASME SA 515, Grade 70, carbon steel.

  20. Final Environmental Assessment: For Construction at the Colorado Army National Guard Army Aviation Support Facility Complex, Buckley Air Force Base, Colorado

    Science.gov (United States)

    2005-01-01

    energy resource efficient design (e.g., a southeast orientation to the building would allow for solar exposure to the hangar doors and apron area, which... solar effects into the design. Communications. Buckley AFB is well served by fiber-optic lines and other communication facilities. There would be a...Box 737 Ignacio , CO 8113 7 From: Colorado Army National Guard 6846 S. Revere Pkwy. Centennial, CO 80112 Dear Mr. Frazier, 12 May2004 The Colorado

  1. Design and construction of a spectrometer facility and experiment for intermediate energy proton scattering on helium. [Wave functions, preliminary experimental techniques

    Energy Technology Data Exchange (ETDEWEB)

    Rolfe, R.M.

    1976-12-01

    The goal of the research was to investigate proton scattering on nuclei at intermediate energies and in particular to investigate proton scattering on helium. A theoretical investigation of the helium nucleus and the nature of the intermediate energy interaction, design and optimization of an energy-loss spectrometer facility for proton-nucleus scattering, and the unique superfluid helium target and experimental design are discussed.

  2. W.K.H. Panofsky Prize in Experimental Particle Physics: The design, construction and performance of the B Factory accelerator facilities, PEP-II and KEKB

    Science.gov (United States)

    Dorfan, Jonathan

    2016-03-01

    The discovery and elucidation of CP violation in the B-meson system presented daunting challenges for the accelerator and detector facilities. This talk discusses how these challenges were met and overcome in the electron-positron colliding-beam accelerator facilities PEP-II (at SLAC) and KEKB (at KEK). The key challenge was to produce unprecedentedly large numbers of B-mesons in a geometry that provided high-statistics, low-background samples of decays to CP eigenstates. This was realized with asymmetric collisions at the Γ(4S) at peak luminosities in excess of 3 ×1033 /sq. cm/sec. Specialized optics were developed to generate efficient, low background, multi-bunch collisions in an energy-asymmetric collision geometry. Novel technologies for the RF, vacuum and feedback systems permitted the storage of multi-amp, multi-bunch beams of electrons and positrons, thereby generating high peak luminosities. Accelerator uptimes greater than 95 percent, combined with high-intensity injection systems, ensured large integrated luminosity. Both facilities rapidly attained their design specifications and ultimately far exceeded the projected performance expectations for both peak and integrated luminosity.

  3. Facilities & Leadership

    Data.gov (United States)

    Department of Veterans Affairs — The facilities web service provides VA facility information. The VA facilities locator is a feature that is available across the enterprise, on any webpage, for the...

  4. National Biomedical Tracer Facility. Project definition study

    Energy Technology Data Exchange (ETDEWEB)

    Schafer, R.

    1995-02-14

    We request a $25 million government-guaranteed, interest-free loan to be repaid over a 30-year period for construction and initial operations of a cyclotron-based National Biomedical Tracer Facility (NBTF) in North Central Texas. The NBTF will be co-located with a linear accelerator-based commercial radioisotope production facility, funded by the private sector at approximately $28 million. In addition, research radioisotope production by the NBTF will be coordinated through an association with an existing U.S. nuclear reactor center that will produce research and commercial radioisotopes through neutron reactions. The combined facilities will provide the full range of technology for radioisotope production and research: fast neutrons, thermal neutrons, and particle beams (H{sup -}, H{sup +}, and D{sup +}). The proposed NBTF facility includes an 80 MeV, 1 mA H{sup -} cyclotron that will produce proton-induced (neutron deficient) research isotopes.

  5. Component School Construction Program.

    Science.gov (United States)

    New Brunswick Dept. of Economic Growth, Fredericton.

    In 1968, the Province of New Brunswick initiated a three-phase program to provide for elementary school facilities, employing a component systems approach to their construction. This booklet describes briefly the planning and construction of these schools, and provides graphic and photographic records of the construction in progress as well as of…

  6. Environmental assessment: South microwave communication facilities

    Energy Technology Data Exchange (ETDEWEB)

    1989-06-01

    Western Area Power Administration (Western) is proposing to construct, operate, and maintain eight microwave repeater stations in southwestern Colorado, southeastern Utah, and northern Arizona, in order to meet the minimum fade criteria established by the Western Systems Coordinating Council (WSCC) for the operation and protection of electric power systems. The proposed microwave facilities would increase the reliability of communication. This environmental assessment (EA) describes the existing environmental conditions and the impacts from construction of the eight microwave communication facilities. The EA was prepared in compliance with the National Environmental Policy Act of 1969, the Council on Environmental Quality Regulations (40 CFR 1500-1508), and the Department of Energy Guidelines (52 FR 47662, December 15, 1987). The proposed project would consist of constructing eight microwave facilities, each of which would include a self-supported lattice tower, an equipment building, a propane tank, distribution lines to provide electric power to the sites, and access roads to the sites. The facilities would be constructed in San Miguel and Montezuma Counties in Colorado, San Juan County, Utah, and Navajo, Apache, Coconino, and Yavapai Counties in Arizona. 20 refs., 2 figs., 2 tabs.

  7. Geodynamics Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This GSL facility has evolved over the last three decades to support survivability and protective structures research. Experimental devices include three gas-driven...

  8. Holifield Radioactive Ion Beam Facility Development and Status

    CERN Document Server

    Tatum, Alan

    2005-01-01

    The Holifield Radioactive Ion Beam Facility (HRIBF) is a national user facility dedicated to nuclear structure, reactions, and nuclear astrophysics research with radioactive ion beams (RIBs) using the isotope separator on-line (ISOL) technique. An integrated strategic plan for physics, experimental systems, and RIB production facilities have been developed and implementation of the plan is under way. Specific research objectives are defined for studying the nature of nucleonic matter, the origin of elements, solar physics, and synthesis of heavy elements. Experimental systems upgrade plans include new detector arrays and beam lines, and expansion and upgrade of existing devices. A multifaceted facility expansion plan includes a $4.75M High Power Target Laboratory (HPTL), presently under construction, to provide a facility for testing new target materials, target geometries, ion sources, and beam preparation techniques. Additional planned upgrades include a second RIB production system (IRIS2), an external axi...

  9. 中部地区高校体育场馆资源建设现状的分析%Analysis on Present Situation of Universities' Sport Facility Resources Construction in Central China

    Institute of Scientific and Technical Information of China (English)

    张大超; 陈海青

    2012-01-01

    采用文献资料、访问调查、数理统计等方法,以中部地区6省的16所"211工程"院校和12所一本院校的体育场馆资源为研究对象,对其体育场馆资源建设现状进行研究分析。结果发现:1)我国中部地区"211工程"建设院校和一本院校的室外场地总体数量不足,配备率不高,学生人均面积较少,不能满足学生课余体育训练和普通学生课外体育锻炼的需要。2)一本院校体育场馆设施的配备率低于"211工程"院校的配备率。3)游泳馆、风雨操场的数量不但相对较少,而且游泳馆的使用率也比较低。4)以发展学生智力与体力为主的项目和激发学生勇于探险胆识的场所,像野外活动基地、攀岩场所严重匮乏。并提出加大建设、合理规划、提高利用率、拓展校外资源等促进中部地区高校学校体育场馆资源建设健康发展的建议。%Taking 16 "211 project" universities and 12 top universities of six provinces in Central China as research objects,we investigated and analyzed the present situation of sports facilities resources construction of universities in Central China through the methods of literature study,investigation and mathematical statistics.The results showed that: 1) At present,indoor sports facilities development in Central China is good and the per capita area of sports facilities reaches standards prescribed by the state.In general,quantity of outdoor sports facilities in Central China is inadequate,the per capita area of sport facilities can not reach the standards prescribed by the state and can't meet the students' extracurricular physical exercise and extracurricular sport training needs;2) provision rate of sports facilities of first-class universities is lower than the "211 project" university in Central China;3) quantity of swimming pools and indoor stadiums relatively is lower than other sport facilities and the utilization rate of swimming pools

  10. Biochemistry Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Biochemistry Facility provides expert services and consultation in biochemical enzyme assays and protein purification. The facility currently features 1) Liquid...

  11. Ukraine experimental neutron source facility.

    Energy Technology Data Exchange (ETDEWEB)

    Gohar, Y.; Bolshinsky, I.; Nekludov, I.; Karnaukhov, I. (Nuclear Engineering Division); (INL); (Kharkov Institute of Physics and Technology)

    2008-01-01

    Kharkov Institute of Physics and Technology (KIPT) of Ukraine has a plan to construct an experimental neutron source facility. The facility has been developed for producing medical isotopes, training young nuclear professionals, supporting the Ukraine nuclear industry, providing capability for performing reactor physics, material research, and basic science experiments. Argonne National Laboratory (ANL) of USA is collaborating with KIPT on developing this facility. A driven subcritical assembly utilizing the KIPT electron accelerator with a target assembly is used to generate the neutron source. The target assembly utilizes tungsten or uranium for neutron production through photonuclear reactions with 100-KW of electron beam power. The neutron source intensity, spectrum, and spatial distribution have been studied to maximize the neutron yield and satisfy different engineering requirements. The subcritical assembly is designed to obtain the highest possible neutron flux intensity with a subcriticality of 0.98. Low enrichment uranium is used for the fuel material because it enhances the neutron source performance. Safety, reliability, and environmental considerations are included in the facility conceptual design. Horizontal neutron channels are incorporated for performing basic research including cold neutron source. This paper describes the conceptual design and summarizes some of the related analyses.

  12. DKIST facility management system integration

    Science.gov (United States)

    White, Charles R.; Phelps, LeEllen

    2016-07-01

    The Daniel K. Inouye Solar Telescope (DKIST) Observatory is under construction at Haleakalā, Maui, Hawai'i. When complete, the DKIST will be the largest solar telescope in the world. The Facility Management System (FMS) is a subsystem of the high-level Facility Control System (FCS) and directly controls the Facility Thermal System (FTS). The FMS receives operational mode information from the FCS while making process data available to the FCS and includes hardware and software to integrate and control all aspects of the FTS including the Carousel Cooling System, the Telescope Chamber Environmental Control Systems, and the Temperature Monitoring System. In addition it will integrate the Power Energy Management System and several service systems such as heating, ventilation, and air conditioning (HVAC), the Domestic Water Distribution System, and the Vacuum System. All of these subsystems must operate in coordination to provide the best possible observing conditions and overall building management. Further, the FMS must actively react to varying weather conditions and observational requirements. The physical impact of the facility must not interfere with neighboring installations while operating in a very environmentally and culturally sensitive area. The FMS system will be comprised of five Programmable Automation Controllers (PACs). We present a pre-build overview of the functional plan to integrate all of the FMS subsystems.

  13. Facility for a Low Power Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chalker, R. G.

    1949-09-14

    Preliminary investigation indicates that a reactor facility with ample research provisions for use by University or other interested groups, featuring safety in design, can be economically constructed in the Los Angeles area. The complete installation, including an underground gas-tight reactor building, with associated storage and experiment assembly building, administration offices, two general laboratory buildings, hot latoratory and lodge, can be constructed for approxinately $1,500,000. This does not include the cost of the reactor itself or of its auxiliary equipment,

  14. Decommissioning the UHTREX Reactor Facility at Los Alamos, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, M.; Elder, J.

    1992-08-01

    The Ultra-High Temperature Reactor Experiment (UHTREX) facility was constructed in the late 1960s to advance high-temperature and gas-cooled reactor technology. The 3-MW reactor was graphite moderated and helium cooled and used 93% enriched uranium as its fuel. The reactor was run for approximately one year and was shut down in February 1970. The decommissioning of the facility involved removing the reactor and its associated components. This document details planning for the decommissioning operations which included characterizing the facility, estimating the costs of decommissioning, preparing environmental documentation, establishing a system to track costs and work progress, and preplanning to correct health and safety concerns in the facility. Work to decommission the facility began in 1988 and was completed in September 1990 at a cost of $2.9 million. The facility was released to Department of Energy for other uses in its Los Alamos program.

  15. Analysis of the Influence of Pravite Capital's Participating in Water Conservancy Facilities' Construction%民间资本参与水利设施建筑施工的影响分析

    Institute of Scientific and Technical Information of China (English)

    陈群

    2015-01-01

    随着水利工程建设的快速发展,解决资金不足的问题成为当务之急。水利从最初建设至今一直以政府投入的支持为核心力量,社会资本的融入可谓屈指可数。随着国内民间资本实力的逐渐增强,民间资本向社会公共建筑行业多方面参与涉及。本文阐述了民间资本的广面流通对如今水利设施建设的如虎添翼的作用,分析了民间资本存在的困境和解决思路以及民间资本的引进对中国水利设施建设的影响,展望了水利工程与民间资本的完美融合将会给水利建设带来全新的改变和革新,以期提供参考。%With the rapid development of water conservancy construction, the problem of fund shortage becomes an urgent affair to be solved. Since the initial construction of water conservancy projects, support from government investment has al⁃ways been the core strength, while the infusion of social capital is few and far between. Along with the gradual reinforce⁃ment of domestic private capital's strength, private capital has participated and been involved in many aspects of public construction industry. On basis of elaborating the remarkable function of private capital's overall circulation on water con⁃servancy facilities' construction nowadays, the article analyzes the plight of private capital and the corresponding solving ideas, as well as the effects of private capital’s introduction on China's construction of water conservancy facilities, in addi⁃tion, it predicts that water conservancy project's perfect fusion with private capital will bring new change and innovation to water conservancy’s construction history, hoping to provide some reference for the industry.

  16. Incineration facilities for treatment of radioactive wastes: a review

    Energy Technology Data Exchange (ETDEWEB)

    Perkins, B.L.

    1976-02-01

    A description is given of incinerator installations in the US and in foreign countries. Included are descriptions of inactive incinerators, incinerator facilities currently in operation, and incinerator installations under construction. Special features of each installation and operational problems of each facility are emphasized. Problems in the incineration of radioactive waste are discussed in relation to the composition of the waste and the amount and type of radioactive contaminant.

  17. Construction, repair and maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Hinger, R. [Terasen Pipelines, Calgary, AB (Canada); Wong, P. [KC Integrity Corp., Calgary, AB (Canada); Yeomans, M.; Glover, A. [TransCanada PipeLines Ltd., Calgary, AB (Canada)

    2003-07-01

    The presentations by Working Group 4 focused on construction, repair and maintenance of pipelines with particular reference to high-strength steels and their applications for natural gas transmission pipelines. Discussions focused on how technology can be used to provide cost-effective design and construction solutions for long distance pipelines in a manner that does not compromise safety and reliability. The role that carbon plays in increasing the toughness of steel was also discussed. A few fundamental changes in steel production technology and a reduction in carbon content can result in a simultaneous increase in strength and toughness of steels. The cost impact of this technology was summarized. It was concluded that high strength steels offer effective solutions to deliver cost-effective pipelines to transport natural gas from northern basins. This session also presented pipeline routes that transport diluted bitumens from the Athabasca Oil Sands Project and the Muskeg River Mine to upgrader facilities in Alberta. Construction issues included design conservatism, water course crossings, winter construction, winter ditching, and public consultation. Examples of high strength steel pipe applications were also included with reference to experience gained by TransCanada and Corridor Pipeline. tabs., figs.

  18. Environmental Assessment For the Proposed Construction and Operation of a Consolidated Fuels Facility and the Demolition of the Existing Fuel Farm at Buckley Air Force Base, Colorado

    Science.gov (United States)

    2005-12-01

    Transfer Pollutant Storage Loses Benzene 19.95 3.40 Cumene 0.97 0.76 Ethyl benzene 1.65 0.7I Hexane 12.76 1.71 Methyl tert-buty l ether 96.72 15.25...Due to the daytime hours of construction 3 operations, no sleep disturbances are expected. In general, the average reaction of receptors 4 outside

  19. Earthquake engineering for nuclear facilities

    CERN Document Server

    Kuno, Michiya

    2017-01-01

    This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground...

  20. TESLA Test Facility. Status

    Energy Technology Data Exchange (ETDEWEB)

    Aune, B. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); TESLA Collaboration

    1996-01-01

    The TESLA Test Facility (TTF), under construction at DESY by an international collaboration, is an R and D test bed for the superconducting option for future linear e+/e-colliders. It consists of an infrastructure to process and test the cavities and of a 500 MeV linac. The infrastructure has been installed and is fully operational. It includes a complex of clean rooms, an ultra-clean water plant, a chemical etching installation and an ultra-high vacuum furnace. The linac will consist of four cryo-modules, each containing eight 1 meter long nine-cell cavities operated at 1.3 GHz. The base accelerating field is 15 MV/m. A first injector will deliver a low charge per bunch beam, with the full average current (8 mA in pulses of 800 {mu}s). A more powerful injector based on RF gun technology will ultimately deliver a beam with high charge and low emittance to allow measurements necessary to qualify the TESLA option and to demonstrate the possibility of operating a free electron laser based on the Self-Amplified-Spontaneous-Emission principle. Overview and status of the facility will be given. Plans for the future use of the linac are presented. (R.P.). 19 refs.

  1. School Construction Scheduling.

    Science.gov (United States)

    Delaney, J. B.

    1983-01-01

    Explains that favorable market and working conditions influence the scheduling of school construction projects. Facility planners, architects, and contractors are advised to develop a realistic time schedule for the entire project. (MLF)

  2. The LLNL Heavy Element Facility -- Facility Management, Authorization Basis, and Readiness Assessment Lessons Learned in the Heavy Element Facility (B251) Transition from Category II Nuclear Facility to Radiological Facility

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, M; Anderson, B; Brown, E; Gray, L

    2006-04-10

    This paper presents Facility Management, Readiness Assessment, and Authorization Basis experience gained and lessons learned during the Heavy Element Facility Risk Reduction Program (RRP). The RRP was tasked with removing contaminated glove boxes, radioactive inventory, and contaminated ventilation systems from the Heavy Element Facility (B251) at Lawrence Livermore National Laboratory (LLNL). The RRP was successful in its goal in April 2005 with the successful downgrade of B251 from a Category II Nuclear Facility to a Radiological Facility. The expertise gained and the lessons learned during the planning and conduct of the RRP included development of unique approaches in work planning/work control (''Expect the unexpected and confirm the expected'') and facility management. These approaches minimized worker dose and resulted in significant safety improvements and operational efficiencies. These lessons learned can help similar operational and management activities at other sites, including facilities restarting operations or new facility startup. B251 was constructed at LLNL to provide research areas for conducting experiments in radiochemistry using transuranic elements. Activities at B251 once included the preparation of tracer sets associated with the underground testing of nuclear devices and basic research devoted to a better understanding of the chemical and nuclear behavior of the transuranic elements. Due to the age of the facility, even with preventative maintenance, facility safety and experimental systems were deteriorating. A variety of seismic standards were used in the facility design and construction, which encompassed eight building increments constructed over a period of 26 years. The cost to bring the facility into compliance with the current seismic and other requirements was prohibitive, and simply maintaining B251 as a Category II nuclear facility posed serious cost considerations under a changing regulatory environment

  3. 湖州市吴兴区社区体育设施建设的现状调查和分析%Sc Wu Xing district, huzhou city, the status quo of community sports facilities construction

    Institute of Scientific and Technical Information of China (English)

    胡凯; 肖玲

    2014-01-01

    With the development of society and economy, people's pursuit of healthy living has become more and more urgent, sports facilities, as a kind of economic and functional exercise tool was welcomed by the masses. Quantity and quality of the city sports facilities in residential area is directly related to people's healthy life. And the lack of city community sports fitness facilities is also a common problem. This paper adopted the random sampling of the judgment sampling method to extract the Wu Xing district, huzhou city, twenty community as investigation object, by on-the-spot investigation method and the way of questionnaire survey method, the investigation has carried on the investigation and study of the system. Based on the results of the survey, this article will revolve around Wu Xing district, huzhou city, the present situation of the sports facilities and sports facilities construction problems in the discussion puts forward my own Suggestions aiming at the problems found.%随着社会与经济的发展,人民群众对健康生活的追求越来越迫切,体育设施作为一种经济又实用的锻炼工具受到了广大群众的欢迎。城市居民小区体育设施的数量与质量直接关系到人民群众的健康生活,而城市社区体育健身设施的缺乏也是一个普遍性的问题。本文采用了非随机抽样中的判断抽样法抽取了湖州市吴兴区的二十个社区为调查对象,以实地考察法和问卷调查法相结合的方式,对调查对象进行了系统的调查研究。基于此次调查的结果,本文将围绕湖州市吴兴区体育设施建设的现状和体育设施建设中的问题展开讨论并针对发现的问题提出个人的建议。

  4. Vitrification facility at the West Valley Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    DesCamp, V.A.; McMahon, C.L.

    1996-07-01

    This report is a description of the West Valley Demonstration Project`s vitrification facilities from the establishment of the West Valley, NY site as a federal and state cooperative project to the completion of all activities necessary to begin solidification of radioactive waste into glass by vitrification. Topics discussed in this report include the Project`s background, high-level radioactive waste consolidation, vitrification process and component testing, facilities design and construction, waste/glass recipe development, integrated facility testing, and readiness activities for radioactive waste processing.

  5. Basic Design of a LWR Fuel Compatibility Test Facility (PLUTO)

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Chang Hwan; Chun, Se Young; Kim, Bok Deuk; Park, Jong Kuk; Chun, Tae Hyun; Kim, Hyoung Kyu; Oh, Dong Seok

    2009-04-15

    KAERI is performing a project for developing a compatibility test facility and the relevant technology for an LWR fuel assembly. It includes the compatibility test and the long term wear test for dual fuel assemblies, and the pressure drop test, uplift force test, flow-induced vibration test, damping test, and the debris filtering capability test for a single fuel assembly. This compatibility test facility of the fuel assemblies is named PLUTO from Performance Test Facility for Fuel Assembly Hydraulics and Vibrations. The PLUTO will be basically constructed for a PWR fuel assembly, and it will be considered to test for the fuel assemblies of other reactors.

  6. Facile and Mild Strategy to Construct Mesoporous CeO2-CuO Nanorods with Enhanced Catalytic Activity toward CO Oxidation.

    Science.gov (United States)

    Chen, Guozhu; Xu, Qihui; Yang, Ying; Li, Cuncheng; Huang, Taizhong; Sun, Guoxin; Zhang, Shuxiang; Ma, Dongling; Li, Xu

    2015-10-28

    CeO2-CuO nanorods with mesoporous structure were synthesized by a facile and mild strategy, which involves an interfacial reaction between Ce2(SO4)3 precursor and NaOH ethanol solution at room temperature to obtain mesoporous CeO2 nanorods, followed by a solvothermal treatment of as-prepared CeO2 and Cu(CH3COO)2. Upon solvothermal treatment, CuO species is highly dispersed onto the CeO2 nanorod surface to form CeO2-CuO composites, which still maintain the mesoporous feature. A preliminary CO catalytic oxidation study demonstrated that the CeO2-CuO samples exhibited strikingly high catalytic activity, and a high CO conversion rate was observed without obvious loss in activity even after thermal treatment at a high temperature of 500 °C. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and hydrogen temperature-programmed reduction (H2-TPR) analysis revealed that there is a strong interaction between CeO2 and CuO. Moreover, it was found that the introduction of CuO species into CeO2 generates oxygen vacancies, which is highly likely to be responsible for high catalytic activity toward CO oxidation of the mesoporous CeO2-CuO nanorods.

  7. Siting algae cultivation facilities for biofuel production in the United States: trade-offs between growth rate, site constructability, water availability, and infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Venteris, Erik R.; McBride, Robert; Coleman, Andre M.; Skaggs, Richard; Wigmosta, Mark S.

    2014-02-21

    Locating sites for new algae cultivation facilities is a complex task. The climate must support high growth rates, and cultivation ponds require appropriate land and water resources as well as key utility and transportation infrastructure. We employ our spatiotemporal Biomass Assessment Tool (BAT) to select promising locations based on the open-pond cultivation of Arthrospira sp. and a strain of the order Desmidiales. 64,000 potential sites across the southern United States were evaluated. We progressively apply a range of screening criteria and track their impact on the number of selected sites, geographic location, and biomass productivity. Both strains demonstrate maximum productivity along the Gulf of Mexico coast, with the highest values on the Florida peninsula. In contrast, sites meeting all selection criteria for Arthrospira were located along the southern coast of Texas and for Desmidiales were located in Louisiana and southern Arkansas. Site selection was driven mainly by the lack of oil pipeline access in Florida and elevated groundwater salinity in southern Texas. The requirement for low salinity freshwater (<400 mg L-1) constrained Desmidiales locations; siting flexibility is greater for salt-tolerant species such as Arthrospira. Combined siting factors can result in significant departures from regions of maximum productivity but are within the expected range of site-specific process improvements.

  8. Study Cost Control in Logistics Facilities Construction Projects Based on VE%基于价值工程的物流设施项目成本控制研究

    Institute of Scientific and Technical Information of China (English)

    陈文杰

    2013-01-01

    利用价值工程理论从技术、经济两个角度对物流设施项目成本控制进行了研究.通过计算成本系数、功能系数和价值系数,从而确定最优成本策略,为进一步推进物流设施项目成本控制和科学决策提供了一种新方法.%In this paper,using the value engineering theory,we studied the cost control of logistics facilities construction projects from a technical and economic perspectives and by calculating the cost,functional and value coefficients,determined the optimal cost strategy.

  9. 25 CFR 170.411 - What may a long-range transportation plan include?

    Science.gov (United States)

    2010-04-01

    ... RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian Reservation Roads Program Facilities Long-Range Transportation Planning § 170.411 What may a long-range transportation plan include? A...) Social and economic development planning to identify transportation improvements or needs to accommodate...

  10. Synchrotron radiation facilities

    CERN Multimedia

    1972-01-01

    Particularly in the past few years, interest in using the synchrotron radiation emanating from high energy, circular electron machines has grown considerably. In our February issue we included an article on the synchrotron radiation facility at Frascati. This month we are spreading the net wider — saying something about the properties of the radiation, listing the centres where synchrotron radiation facilities exist, adding a brief description of three of them and mentioning areas of physics in which the facilities are used.

  11. Fabrication Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — The Fabrication Facilities are a direct result of years of testing support. Through years of experience, the three fabrication facilities (Fort Hood, Fort Lewis, and...

  12. Discussion on Construction Process of Water Facilities in Wuchang during Period of Republican China%民国时期武昌自来水事业兴办历程述论

    Institute of Scientific and Technical Information of China (English)

    向明亮

    2014-01-01

    The city utility of water is an important public facility relating to the livelihood of every family and directly affecting the health and life quality of urban residents .In the period of Republican China ,Wuchang water facilities had undergone many ups and downs .From the initial idea to the project completion , the scale of water plant shrank constantly and eventually a very limited scale temporary water plant was completed . This case revealed that the backward wuchang municipal construction , the insufficient funds , lack of talents , together with the changeable municipal establishment should take the responsibility for the difficulty in the municipal construction .%城市公用自来水事业是一项事关千家万户的市政设施,它直接影响到城市居民的健康和生活质量。民国时期,武昌自来水事业兴办过程历经艰难曲折,从最初设想到工程完工,水厂规模不断缩减,最终仅完成一座规模十分有限的武昌临时水厂。此个案揭示了武昌市政建设的落后,资金不足、人才难求,加之更张多变的建制是造成了这一时期市政建设困难的主要原因。

  13. 45 CFR 84.23 - New construction.

    Science.gov (United States)

    2010-10-01

    ... with sections 3-8 of the Uniform Federal Accessibility Standards (UFSA) (appendix A to 41 CFR subpart... 45 Public Welfare 1 2010-10-01 2010-10-01 false New construction. 84.23 Section 84.23 Public... construction. (a) Design and construction. Each facility or part of a facility constructed by, on behalf of,...

  14. 15 CFR 8b.18 - New construction.

    Science.gov (United States)

    2010-01-01

    ... Standards (UFAS) (Appendix A to 41 CFR subpart 101-19.6) shall be deemed to comply with the requirements of... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false New construction. 8b.18 Section 8b.18... construction. (a) Design and construction. Each facility or part of a facility constructed by, on behalf of,...

  15. 38 CFR 18.423 - New construction.

    Science.gov (United States)

    2010-07-01

    ... sections 3-8 of the Uniform Federal Accessibility Standards (USAF) (appendix A to 41 CFR subpart 101-19.6... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false New construction. 18.423... construction. (a) Design and construction. Each facility or part of a facility constructed by, on behalf of,...

  16. Facility Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Z.; Walling, R.; Miller, N.; Du, P.; Nelson, K.

    2005-05-01

    Microgrids are receiving a considerable interest from the power industry, partly because their business and technical structure shows promise as a means of taking full advantage of distributed generation. This report investigates three issues associated with facility microgrids: (1) Multiple-distributed generation facility microgrids' unintentional islanding protection, (2) Facility microgrids' response to bulk grid disturbances, and (3) Facility microgrids' intentional islanding.

  17. The impact of the life cycle analysis methodology on whether biodiesel produced from residues can meet the EU sustainability criteria for biofuel facilities constructed after 2017

    Energy Technology Data Exchange (ETDEWEB)

    Thamsiriroj, T.; Murphy, J.D. [Department of Civil and Environmental Engineering, University College Cork (Ireland); Environmental Research Institute, University College Cork (Ireland)

    2011-01-15

    This paper considers biodiesel production from residues; tallow and used cooking oil (UCO). The tallow system is more complex involving two processes. The first process is rendering in which tallow (animal fat) and Meat and Bone Meal (MBM) are produced from the slaughter of cattle. MBM is assumed as a thermal energy source for cement manufacture and thus is not used for biodiesel production. The second process is biodiesel production from tallow. Three methodologies are employed to examine sustainability of the biodiesel. The no allocation approach assigns all the parasitic demands to the tallow; thus all energies required to make both MBM and tallow are associated with the tallow biodiesel. The resulting energy balance is negative. The substitution approach allocates the energy in MBM (used to produce cement) to tallow biodiesel. This results in the net energy being greater than the gross energy. The allocation by energy content method divides the parasitic demands of the rendering process between tallow and MBM by energy content. The parasitic demands of the biodiesel process are divided by energy content of the biodiesel, glycerol and K-fertiliser. For tallow biodiesel this yielded a net energy value of 38.6% of gross energy. The same method generated a net energy value of 67% for UCO biodiesel. More importantly the recommended method (allocation by energy content) generated a value of 54% greenhouse gas (GHG) emission savings for tallow and a value of 69% for UCO. Plants commencing after 2017, need to have a 60% GHG emission savings, to be considered sustainable. Thus a facility treating both feedstocks would need to treat a maximum of 60% tallow to be considered sustainable after 2017. (author)

  18. Complete nucleotide sequences and construction of full-length infectious cDNA clones of cucumber green mottle mosaic virus (CGMMV) in a versatile newly developed binary vector including both 35S and T7 promoters.

    Science.gov (United States)

    Park, Chan-Hwan; Ju, Hye-Kyoung; Han, Jae-Yeong; Park, Jong-Seo; Kim, Ik-Hyun; Seo, Eun-Young; Kim, Jung-Kyu; Hammond, John; Lim, Hyoun-Sub

    2017-04-01

    Seed-transmitted viruses have caused significant damage to watermelon crops in Korea in recent years, with cucumber green mottle mosaic virus (CGMMV) infection widespread as a result of infected seed lots. To determine the likely origin of CGMMV infection, we collected CGMMV isolates from watermelon and melon fields and generated full-length infectious cDNA clones. The full-length cDNAs were cloned into newly constructed binary vector pJY, which includes both the 35S and T7 promoters for versatile usage (agroinfiltration and in vitro RNA transcription) and a modified hepatitis delta virus ribozyme sequence to precisely cleave RNA transcripts at the 3' end of the tobamovirus genome. Three CGMMV isolates (OMpj, Wpj, and Mpj) were separately evaluated for infectivity in Nicotiana benthamiana, demonstrated by either Agroinfiltration or inoculation with in vitro RNA transcripts. CGMMV nucleotide identities to other tobamoviruses were calculated from pairwise alignments using DNAMAN. CGMMV identities were 49.89% to tobacco mosaic virus; 49.85% to pepper mild mottle virus; 50.47% to tomato mosaic virus; 60.9% to zucchini green mottle mosaic virus; and 60.96% to kyuri green mottle mosaic virus, confirming that CGMMV is a distinct species most similar to other cucurbit-infecting tobamoviruses. We further performed phylogenetic analysis to determine relationships of our new Korean CGMMV isolates to previously characterized isolates from Canada, China, India, Israel, Japan, Korea, Russia, Spain, and Taiwan available from NCBI. Analysis of CGMMV amino acid sequences showed three major clades, broadly typified as 'Russian,' 'Israeli,' and 'Asian' groups. All of our new Korean isolates fell within the 'Asian' clade. Neither the 128 nor 186 kDa RdRps of the three new isolates showed any detectable gene silencing suppressor function.

  19. Modernizing sports facilities

    Energy Technology Data Exchange (ETDEWEB)

    Dustin, R. [McKenney`s, Inc., Atlanta, GA (United States)

    1996-09-01

    Modernization and renovation of sports facilities challenge the design team to balance a number of requirements: spectator and owner expectations, existing building and site conditions, architectural layouts, code and legislation issues, time constraints and budget issues. System alternatives are evaluated and selected based on the relative priorities of these requirements. These priorities are unique to each project. At Alexander Memorial Coliseum, project schedules, construction funds and facility usage became the priorities. The ACC basketball schedule and arrival of the Centennial Olympics dictated the construction schedule. Initiation and success of the project depended on the commitment of the design team to meet coliseum funding levels established three years ago. Analysis of facility usage and system alternative capabilities drove the design team to select a system that met the project requirements and will maximize the benefits to the owner and spectators for many years to come.

  20. Multi-Directional Experimental Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The ATLSS Multi-directional Experimental Laboratory was constructed in 1987 under funding from the National Science Foundation to be a major facility for large-scale...

  1. Reverberant Acoustic Test Facility (RATF)

    Data.gov (United States)

    Federal Laboratory Consortium — The very large Reverberant Acoustic Test Facility (RATF) at the NASA Glenn Research Center (GRC), Plum Brook Station, is currently under construction and is due to...

  2. New instrument calibration facility for the DOE Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Wilkie, W.H.; Polz, E.J. [Westinghouse Savannah River Company, Aiken, SC (United States)

    1993-12-31

    A new laboratory facility is being designed, constructed, and equipped at the Savannah River Site (SRS) as a fiscal year 1992 line item project. This facility will provide space and equipment for test, evaluation, repair, maintenance, and calibration of radiation monitoring instrumentation. The project will replace an obsolete facility and will allow implementation of program upgrades necessary to meet ANSI N323 requirements and National Voluntary Laboratory Accreditation Program (NVLAP) criteria for accreditation of federally owned secondary calibration laboratories. An outline of the project is presented including description, scope, cost, management organization, chronology, and current status. Selected design criteria and their impacts on the project are discussed. The upgraded SRS calibration program is described, and important features of the new facility and equipment that will accommodate this program are listed. The floor plan for the facility is shown, and equipment summaries and functional descriptions for each area are provided.

  3. Radiological characterization of the TAN-IET facility

    Energy Technology Data Exchange (ETDEWEB)

    Koeppen, L.D.; Rodriguez, S.V.; Wheeler, O.A.; Cadwell, E.D.; Simpson, O.D.

    1982-06-01

    The Initial Engine Test (IET) facility is located on the Idaho National Engineering Laboratory (INEL) site at the north end of Test Area North (TAN). The IET facility was constructed and used for the Aircraft Nuclear Propulsion Program during the 1950's and was later used for two other programs: the Space Nuclear Auxiliary Power Transient (SNAP-TRAN) and the Hallam Decontamination and Decommissioning Project. The facility is no longer in use, therefore, a complete radiological characterization was conducted at the IET site. The characterization included measurements of beta-gamma dose rates; beta-gamma and alpha surface contamination; concentrations of selected radionuclides in subsurface storage tanks, surface soil, the exhaust duct, stack and test pad; and a walk-over surface survey of the entire facility. The information contained in this report will be of great value as the IET facility goes through the decommissioning and decontamination process.

  4. Performance and characteristics of a high pressure, high temperature capillary cell with facile construction for operando x-ray absorption spectroscopy.

    Science.gov (United States)

    Bansode, Atul; Guilera, Gemma; Cuartero, Vera; Simonelli, Laura; Avila, Marta; Urakawa, Atsushi

    2014-08-01

    We demonstrate the use of commercially available fused silica capillary and fittings to construct a cell for operando X-ray absorption spectroscopy (XAS) for the study of heterogeneously catalyzed reactions under high pressure (up to 200 bars) and high temperature (up to 280 °C) conditions. As the first demonstration, the cell was used for CO2 hydrogenation reaction to examine the state of copper in a conventional Cu/ZnO/Al2O3 methanol synthesis catalyst. The active copper component of the catalyst was shown to remain in the metallic state under supercritical reaction conditions, at 200 bars and up to 260 °C. With the coiled heating system around the capillary, one can easily change the length of the capillary and control the amount of catalyst under investigation. With precise control of reactant(s) flow, the cell can mimic and serve as a conventional fixed-bed micro-reactor system to obtain reliable catalytic data. This high comparability of the reaction performance of the cell and laboratory reactors is crucial to gain insights into the nature of actual active sites under technologically relevant reaction conditions. The large length of the capillary can cause its bending upon heating when it is only fixed at both ends because of the thermal expansion. The degree of the bending can vary depending on the heating mode, and solutions to this problem are also presented. Furthermore, the cell is suitable for Raman studies, nowadays available at several beamlines for combined measurements. A concise study of CO2 phase behavior by Raman spectroscopy is presented to demonstrate a potential of the cell for combined XAS-Raman studies.

  5. Performance and characteristics of a high pressure, high temperature capillary cell with facile construction for operando x-ray absorption spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Bansode, Atul; Urakawa, Atsushi, E-mail: aurakawa@iciq.es [Institute of Chemical Research of Catalonia (ICIQ), Av. Països Catalans 16, 43007 Tarragona (Spain); Guilera, Gemma; Simonelli, Laura; Avila, Marta [ALBA Synchrotron Light Source, Crta. BP 1413, Km. 3.3, 08290 Cerdanyola del Vallès, Barcelona (Spain); Cuartero, Vera [ALBA Synchrotron Light Source, Crta. BP 1413, Km. 3.3, 08290 Cerdanyola del Vallès, Barcelona (Spain); European Synchrotron Radiation Facility (ESRF), CS40220, F-38043, Grenoble Cedex (France)

    2014-08-15

    We demonstrate the use of commercially available fused silica capillary and fittings to construct a cell for operando X-ray absorption spectroscopy (XAS) for the study of heterogeneously catalyzed reactions under high pressure (up to 200 bars) and high temperature (up to 280 °C) conditions. As the first demonstration, the cell was used for CO{sub 2} hydrogenation reaction to examine the state of copper in a conventional Cu/ZnO/Al{sub 2}O{sub 3} methanol synthesis catalyst. The active copper component of the catalyst was shown to remain in the metallic state under supercritical reaction conditions, at 200 bars and up to 260 °C. With the coiled heating system around the capillary, one can easily change the length of the capillary and control the amount of catalyst under investigation. With precise control of reactant(s) flow, the cell can mimic and serve as a conventional fixed-bed micro-reactor system to obtain reliable catalytic data. This high comparability of the reaction performance of the cell and laboratory reactors is crucial to gain insights into the nature of actual active sites under technologically relevant reaction conditions. The large length of the capillary can cause its bending upon heating when it is only fixed at both ends because of the thermal expansion. The degree of the bending can vary depending on the heating mode, and solutions to this problem are also presented. Furthermore, the cell is suitable for Raman studies, nowadays available at several beamlines for combined measurements. A concise study of CO{sub 2} phase behavior by Raman spectroscopy is presented to demonstrate a potential of the cell for combined XAS-Raman studies.

  6. Final Environmental Assessment Addressing Construction, Operation, and Maintenance of a Military Working Dog Facility at Kirtland Air Force Base, New Mexico

    Science.gov (United States)

    2011-03-01

    include a new Base Exchange, pharmacy, retail laundry/dry cleaning, a beauty/barber shop, concession kiosks , five food concepts with a food court, and...rioranchoprojectsheet.htm>. Accessed 21 January 2010. WPH 2006 Wag Pet Hotels (WPH). 2006. “Community and Employee Noise Survey.” Prepared by

  7. Air Defense Radar Operations Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Facility consists of laboratories, experimental test equipment including state-of-theart test bed radar, and test ranges. The facilities are used to design, develop,...

  8. Air Defense Radar Operations Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Facility consists of laboratories, experimental test equipment including state-of-theart test bed radar, and test ranges. The facilities are used to design, develop,...

  9. Solid Waste Management Facilities with Permits by the Iowa DNR

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — All types of facilities that handle solid waste, including: sanitary landfills, appliance demanufacturing facilities, transfer stations, land application sites,...

  10. 含人 LINGO -1慢病毒干扰载体的构建与鉴定%Construction and Identification of Lentiviral Interference Vector That Including Human LINGO-1

    Institute of Scientific and Technical Information of China (English)

    索磊; 杨印祥; 栾佐

    2016-01-01

    Objective To construct the lentiviral interference vector that including human LINGO - 1 in vitro and evaluate its interference effects on the target gene LINGO - 1. Methods From March to November in 2015,interference sequences that targeted at human LINGO - 1 interfered by short hairpin RNA(LINGO - 1 shRNA)were designed and synthesized according to the LINGO - 1 gene sequence reported in GenBank database,LINGO - 1 shRNA was cloned into recombinant plasmid vectors. They were assembled in 293T cells after sequence verification. The test divided into interference vector group of target gene(experimental group)and interference vector group of mismatch sequence(control group),the lentiviral vectors were transfected into U251 cells of human glioma, and its efficiency of infection was observed by fluorescence microscopy. Immunofluorescent staining and real - time fluorescent quantitative polymerase chain reaction(qPCR)method were adopted to detect the expression level of LINGO - 1 mRNA. The expression level of LINGO - 1 was detected by Western blotting method. Results Two groups of lentiviral interference vectors were successfully constructed,and the virus stock solutions with a titer of 2 × 108 TU/ ml and 4 × 108 TU/ ml were obtained respectively after package. After U251 cells of human glioma were transfected with virus vectors,the transfection efficiency of vectors in experimental group and control group were 96. 6% and 95. 2% respectively. Immunofluorescent staining presented that LINGO - 1 was highly expressed in U251 cells of human glioma, and immunofluorescence in experimental group weakened after the transfection of lentiviral vectors. The expression level of LINGO- 1 mRNA in experimental group(0. 09 ± 0. 01)was significantly decreased compared with that in control group(1. 00 ± 0. 00) (t = 12. 87,P ﹤ 0. 01),and the interference rate of LINGO - 1 mRNA relative expression in experimental group was 91. 0% . Compared with control group(1. 00 ± 0. 00),the

  11. A Computational Method for Evaluating Modular Prefabricated Structural Element for Rapid Construction of Facilities, Barriers, and Revetments to Resist Modern Conventional Weapons Effects

    Science.gov (United States)

    1988-07-01

    strong concrete (6500 psi). Bazant and Byong (Reference 59) extended the data base by combining the results from several studies (including Watstein’s...Force Base, NM, Jan . 1982. 21. Mattock, A. H., Discussion of "Rotational Capacity of Reinforced Concrete Beams"! by W. G. Corley, ASCE Journal of the... Bazant , Z., P., and Byung, H. 0., "Strain Rate Effect in Rapid Triaxial Loading of Concretei" ASCE Journal of Engineering Mechanics Division, Vol

  12. Demolition, Construction, Operation and Maintenance of New Boat Docks, Boat Ramp, and Support Facility at Cape Canaveral Air Force Station, Florida. Environmental Assessment. Version 1.3

    Science.gov (United States)

    2006-08-16

    know to occur in most types of habitat and is often associated with gopher tortoise burrows, which it occupies when inactive. The reproductive ...Highly Migratory species, Red Drum, Spiny Lobster, Golden Crab, Calico Scallop and Sargassum . In addition to EFH designations, Habitat Areas of... Sargassum , and live/hard bottom habitat. Essential fish habitat for the snapper-grouper species complex includes coral reefs, live/hard bottom

  13. Airborne & Field Sensors Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — RTTC facilities include an 800' x 60' paved UAV operational area, clearapproach/departure zone, concrete pads furnished with 208VAC, 3 phase,200 amp power, 20,000 sq...

  14. Urban Test Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — RTTC has access to various facilities for use in urban testing applications,including an agreement with the Hazardous Devices School (HDS): a restrictedaccess Urban...

  15. Pittsburgh City Facilities

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Pittsburgh City FacilitiesIncludes: City Administrative Buildings, Police Stations, Fire Stations, EMS Stations, DPW Sites, Senior Centers, Recreation Centers, Pool...

  16. Pittsburgh City Facilities

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Pittsburgh City FacilitiesIncludes: City Administrative Buildings, Police Stations, Fire Stations, EMS Stations, DPW Sites, Senior Centers, Recreation Centers,...

  17. Facile one-pot construction of α-Fe{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} heterojunction for arsenic removal by synchronous visible light catalysis oxidation and adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Suwen; Ji, Chunnuan, E-mail: 1842355613@qq.com; Wu, Lingling; Chi, Shenghua; Qu, Rongjun; Li, Yan; Lu, Yangxiao; Sun, Changmei; Xue, Zhongxin

    2017-06-15

    α-Fe{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} composites with heterojunction were prepared by facile one-pot synthesis using ferric chloride and dicyandiamide as precursors. The newly formed composites were applied to remove arsenic from aqueous solution for the first time through synchronous visible light catalysis oxidation and adsorption. α-Fe{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} composites were characterized by wide-angle X-ray powder diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, UV–Vis diffuse reflectance spectroscopy, and BET surface analysis. Under visible light irradiation, As(III) was oxidized to As(V) efficiently on the surface of α-Fe{sub 2}O{sub 3}/g-C{sub 3}N{sub 4}. In addition, the oxidized arsenic could be adsorbed in situ, resulting in the effective arsenic removal. The enhancement of photocatalytic activity the composites was attributed to the construction of heterojunction between α-Fe{sub 2}O{sub 3} and g-C{sub 3}N{sub 4}. A possible oxidation mechanism of the as-composites for As(III) under visible light irradiation was also elucidated. - Highlights: • α-Fe{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} composites with heterojunction was prepared by facile one-pot synthesis. • The photocatalytic activity of α-Fe{sub 2}O{sub 3}/g-C{sub 3}N{sub 4} composites under visible light irradiation for As(III) was evaluated. • Synchronous visible light catalysis oxidation and adsorption were achieved for the removal of arsenic. • The reasonable oxidation mechanism of the composites for As(III) under visible light irradiation was investigated.

  18. Facility Effluent Monitoring Plan for Pacific Northwest National Laboratory Balance-of-Plant Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Ballinger, Marcel Y.; Gervais, Todd L.

    2004-11-15

    The Pacific Northwest National Laboratory (PNNL) operates a number of Research & Development (R&D) facilities for the U.S. Department of Energy (DOE) on the Hanford Site. Facility effluent monitoring plans (FEMPs) have been developed to document the facility effluent monitoring portion of the Environmental Monitoring Plan (DOE 2000) for the Hanford Site. Three of PNNL’s R&D facilities, the 325, 331, and 3720 Buildings, are considered major emission points for radionuclide air sampling, and individual FEMPs were developed for these facilities in the past. In addition, a balance-of-plant (BOP) FEMP was developed for all other DOE-owned, PNNL-operated facilities at the Hanford Site. Recent changes, including shutdown of buildings and transition of PNNL facilities to the Office of Science, have resulted in retiring the 3720 FEMP and combining the 331 FEMP into the BOP FEMP. This version of the BOP FEMP addresses all DOE-owned, PNNL-operated facilities at the Hanford Site, excepting the Radiochemical Processing Laboratory, which has its own FEMP because of the unique nature of the building and operations. Activities in the BOP facilities range from administrative to laboratory and pilot-scale R&D. R&D activities include both radioactive and chemical waste characterization, fluid dynamics research, mechanical property testing, dosimetry research, and molecular sciences. The mission and activities for individual buildings are described in Appendix A. Potential radioactive airborne emissions in the BOP facilities are estimated annually using a building inventory-based approach provided in federal regulations. Sampling at individual BOP facilities is based on a potential-to-emit assessment. Some of these facilities are considered minor emission points and thus are sampled routinely, but not continuously, to confirm the low emission potential. One facility, the 331 Life Sciences Laboratory, has a major emission point and is sampled continuously. Sampling systems are

  19. Construction Sector (NAICS 23)

    Science.gov (United States)

    Find environmental regulatory information for the construction sector, including the construction of buildings or engineering projects. This includes RCRA information for hazardous waste, refrigeration compliance, asbestos, effluent guidelines & lead laws

  20. 40 CFR 35.2030 - Facilities planning.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Facilities planning. 35.2030 Section 35... STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2030 Facilities planning. (a) General. (1) Facilities planning consists of those necessary plans and studies which directly relate to...

  1. 30 CFR 784.30 - Support facilities.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Support facilities. 784.30 Section 784.30... Support facilities. Each applicant for an underground coal mining and reclamation permit shall submit a description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

  2. 21 CFR 1271.190 - Facilities.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Facilities. 1271.190 Section 1271.190 Food and... CELLULAR AND TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.190 Facilities. (a) General. Any facility used in the manufacture of HCT/Ps must be of suitable size, construction, and location to prevent...

  3. 42 CFR 493.1101 - Standard: Facilities.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Facilities. 493.1101 Section 493.1101... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Facility Administration for Nonwaived Testing § 493.1101 Standard: Facilities. (a) The laboratory must be constructed, arranged, and maintained to...

  4. 30 CFR 780.38 - Support facilities.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Support facilities. 780.38 Section 780.38... Support facilities. Each applicant for a surface coal mining and reclamation permit shall submit a description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

  5. 24 CFR 1710.214 - Recreational facilities.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Recreational facilities. 1710.214... § 1710.214 Recreational facilities. (a) Submit a synopsis of the proposed plans and estimated cost of any proposed or partially constructed recreational facility disclosed in § 1710.114. This item should...

  6. Preconceptual design of the new production reactor circulator test facility

    Energy Technology Data Exchange (ETDEWEB)

    Thurston, G.

    1990-06-01

    This report presents the results of a study of a new circulator test facility for the New Production Reactor Modular High-Temperature Gas-Cooled Reactor. The report addresses the preconceptual design of a stand-alone test facility with all the required equipment to test the Main Circulator/shutoff valve and Shutdown Cooling Circulator/shutoff valve. Each type of circulator will be tested in its own full flow, full power helium test loop. Testing will cover the entire operating range of each unit. The loop will include a test vessel, in which the circulator/valve will be mounted, and external piping. The external flow piping will include a throttle valve, flowmeter, and heat exchanger. Subsystems will include helium handling, helium purification, and cooling water. A computer-based data acquisition and control system will be provided. The estimated costs for the design and construction of this facility are included. 2 refs., 15 figs.

  7. Idaho CERCLA Disposal Facility Complex Compliance Demonstration for DOE Order 435.1

    Energy Technology Data Exchange (ETDEWEB)

    J. Simonds

    2006-09-01

    This compliance demonstration document provides an analysis of the Idaho CERCLA Disposal Facility (ICDF) Complex compliance with DOE Order 435.1. The ICDF Complex includes the disposal facility (landfill), evaporation pond, admin facility, weigh scale, decon building, treatment systems, and various staging/storage areas. These facilities were designed and are being constructed to be compliant with DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, and Toxic Substances Control Act polychlorinated biphenyl design and construction standards. The ICDF Complex is designated as the central Idaho National Laboratory (INL) facilityyy for the receipt, staging/storage, treatment, and disposal of INL Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) waste streams. This compliance demonstration document discusses the conceptual site model for the ICDF Complex area. Within this conceptual site model, the selection of the area for the ICDF Complex is discussed. Also, the subsurface stratigraphy in the ICDF Complex area is discussed along with the existing contamination beneath the ICDF Complex area. The designs for the various ICDF Complex facilities are also included in this compliance demonstration document. These design discussions are a summary of the design as presented in the Remedial Design/Construction Work Plans for the ICDF landfill and evaporation pond and the Staging, Storage, Sizing, and Treatment Facility. Each of the major facilities or systems is described including the design criteria.

  8. Lunar base construction requirements

    Science.gov (United States)

    Jolly, Steve; Helleckson, Brent

    1990-01-01

    The following viewgraph presentation is a review of the Lunar Base Constructibility Study carried out in the spring and summer of 1990. The objective of the study was to develop a method for evaluating the constructibility of Phase A proposals to build facilities on orbit or on extraterrestrial surfaces. Space construction was broadly defined as all forms of assembly, disassembly, connection, disconnection, deployment, stowage, excavation, emplacement, activation, test, transportation, etc., required to create facilities in orbit and on the surfaces of other celestial bodies. It was discovered that decisions made in the face of stated and unstated assumptions early in the design process (commonly called Phase A) can lock in non-optimal construction methods. Often, in order to construct the design, alterations must be made to the design during much later phases of the project. Such 'fixes' can be very difficult, expensive, or perhaps impossible. Assessing constructibility should thus be a part of the iterative design process, starting with the Phase A studies and continuing through production. This study assumes that there exists a minimum set of key construction requirements (i.e., questions whose answers form the set of discriminators) that must be implied or specified in order to assess the constructibility of the design. This set of construction requirements constitutes a 'constructibility filter' which then becomes part of the iterative design process. Five inherently different, dichotomous design reference missions were used in the extraction of these requirements to assure the depth and breath of the list.

  9. Analysis of the problems of Electric vehicle charging facilities construction and promotion%分布式电动汽车充电设施建设及推广

    Institute of Scientific and Technical Information of China (English)

    巫志平

    2016-01-01

    This paper analyzes status and characteristics of the domestic market of the electric vehicle,proposes distributed in⁃frastructure mode for the purpose of expanding the construction of charging facilities according charging demand, introduces the sev⁃eral new charging technology and methods which develop by out⁃standing domestic enterprises .We applie Internet technology to ex⁃pand electric vehicle value⁃added services, develop the charging industrial ecosystem.%分析国内电动汽车市场现状和特点,提出根据充电需求以扩大充电设施建设面为目的的分布式充电设施建设模式,介绍了国内优秀企业开发的几种新充电技术及方法,并应用互联网技术拓展电动汽车增值服务,发展充电的产业生态系统。

  10. 10 CFR 1040.73 - New construction.

    Science.gov (United States)

    2010-01-01

    ...) (appendix A to 41 CFR subpart 101-19.6) shall be deemed to comply with the requirements of this section with... 10 Energy 4 2010-01-01 2010-01-01 false New construction. 1040.73 Section 1040.73 Energy... § 1040.73 New construction. (a) Design and construction. Each facility or part of a facility...

  11. Green Construction: Efficient Design for Military Facilities

    Science.gov (United States)

    2000-09-01

    Id.com/ archives /Ot her-copy/NavyPol icy3 .ht m I > l6 ASHRAE Standard 90.1 Turchen, Stephen and Comer, Craig, Making Sense of the Model Energy Code 17...add extreme costs to the project by the necessity of compliance. American Society of Heating, Refrigeration , and Air Conditioning Engineers... ASHRAE Standard 90.1. This standard was the first national consensus on commercial building energy efficiency. Utilization of thermal mass and United

  12. Evaluating User Change Requests in Facility Construction

    Science.gov (United States)

    1989-09-01

    of reason analysis to explain intentions or actions of individuals. Kadushin reports, in his article, that Lazarsfeld defined reason analysis as...secured by a correctly conducted questionnaire survey. (7:147) Lazarsfeld , as reported by Clover, identified important conditions in "the art of...Business Research Methods (Third Edition). Homewood IL: Richard D. Irwin, Inc., 1985. 22. Guthrie, Kenneth M. and Paul E. Konkel. "Project

  13. 45 CFR 1232.15 - New construction.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false New construction. 1232.15 Section 1232.15 Public... Accessibility § 1232.15 New construction. (a) Design, construction, and alteration. New facilities shall be designed and constructed to be readily accessible to and usable by handicapped persons. construction shall...

  14. Proton beam therapy facility

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-09

    It is proposed to build a regional outpatient medical clinic at the Fermi National Accelerator Laboratory (Fermilab), Batavia, Illinois, to exploit the unique therapeutic characteristics of high energy proton beams. The Fermilab location for a proton therapy facility (PTF) is being chosen for reasons ranging from lower total construction and operating costs and the availability of sophisticated technical support to a location with good access to patients from the Chicago area and from the entire nation. 9 refs., 4 figs., 26 tabs.

  15. MAST Upgrade – Construction Status

    Energy Technology Data Exchange (ETDEWEB)

    Milnes, Joe, E-mail: Joe.Milnes@ccfe.ac.uk; Ayed, Nizar Ben; Dhalla, Fahim; Fishpool, Geoff; Hill, John; Katramados, Ioannis; Martin, Richard; Naylor, Graham; O’Gorman, Tom; Scannell, Rory

    2015-10-15

    Highlights: • Outlines unique capability of MAST-U, including divertor and diagnostic capability. • Describes progress made in the manufacture and assembly of key MAST-U components. • Highlights the design challenges that have been overcome. • Lists the key lessons learned thus far in the project. - Abstract: The Mega Amp Spherical Tokamak (MAST) is the centre piece of the UK fusion research programme. In 2010, a MAST Upgrade programme was initiated with three primary objectives, to contribute to: (1) testing reactor concepts (in particular exhaust solutions via a flexible divertor allowing Super-X and other extended leg configurations); (2) adding to the knowledge base for ITER (by addressing important plasma physics questions and developing predictive models to help optimise ITER performance of ITER) and (3) exploring the feasibility of using a spherical tokamak as the basis for a fusion Component Test Facility. With the project mid-way through its construction phase, progress will be reported on a number of the critical subsystems. This will include manufacture and assembly of the coils, armour and support structures that make up the new divertors, construction of the new set coils that make up the centre column, installation of the new power supplies for powering the divertor coils and enhanced TF coil set, progress in delivering the upgraded diagnostic capability, the modification and upgrading of the NBI heating systems and the complete overhaul of the machine control infrastructure, including a new control room with full remote participation facilities.

  16. Status of the SXFEL Facility

    Directory of Open Access Journals (Sweden)

    Zhentang Zhao

    2017-06-01

    Full Text Available The Shanghai soft X-ray Free-Electron Laser facility (SXFEL is being developed in two steps; the SXFEL test facility (SXFEL-TF, and the SXFEL user facility (SXFEL-UF. The SXFEL-TF is a critical development step towards the construction a soft X-ray FEL user facility in China, and is under commissioning at the Shanghai Synchrotron Radiation Facility (SSRF campus. The test facility is going to generate 8.8 nm FEL radiation using an 840 MeV electron linac passing through the two-stage cascaded HGHG-HGHG or EEHG-HGHG (high-gain harmonic generation, echo-enabled harmonic generation scheme. The construction of the SXFEL-TF started at the end of 2014. Its accelerator tunnel and klystron gallery were ready for equipment installation in April 2016, and the installation of the SXFEL-TF linac and radiator undulators were completed by the end of 2016. In the meantime, the SXFEL-UF, with a designated wavelength in the water window region, began construction in November 2016. This was based on upgrading the linac energy to 1.5 GeV, and the building of a second undulator line and five experimental end-stations. Construction status and the future plans of the SXFEL are reported in this paper.

  17. Mammography Facilities

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Mammography Facility Database is updated periodically based on information received from the four FDA-approved accreditation bodies: the American College of...

  18. Canyon Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — B Plant, T Plant, U Plant, PUREX, and REDOX (see their links) are the five facilities at Hanford where the original objective was plutonium removal from the uranium...

  19. Space Nuclear Thermal Propulsion (SNTP) Air Force facility

    Science.gov (United States)

    Beck, David F.

    1993-01-01

    The Space Nuclear Thermal Propulsion (SNTP) Program is an initiative within the US Air Force to acquire and validate advanced technologies that could be used to sustain superior capabilities in the area or space nuclear propulsion. The SNTP Program has a specific objective of demonstrating the feasibility of the particle bed reactor (PBR) concept. The term PIPET refers to a project within the SNTP Program responsible for the design, development, construction, and operation of a test reactor facility, including all support systems, that is intended to resolve program technology issues and test goals. A nuclear test facility has been designed that meets SNTP Facility requirements. The design approach taken to meet SNTP requirements has resulted in a nuclear test facility that should encompass a wide range of nuclear thermal propulsion (NTP) test requirements that may be generated within other programs. The SNTP PIPET project is actively working with DOE and NASA to assess this possibility.

  20. Facilities | ECHO | US EPA

    Science.gov (United States)

    ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

  1. The National Ignition Facility project

    Energy Technology Data Exchange (ETDEWEB)

    Paisner, J.A.; Boyes, J.D.; Kumpan, S.A.; Sorem, M.

    1996-06-01

    The Secretary of the U.S. Department of Energy (DOE) commissioned a Conceptual Design Report (CDR) for the National Ignition Facility (NIF) in January 1993 as part of a Key Decision Zero (KD0), justification of Mission Need. Motivated by the progress to date by the Inertial Confinement Fusion (ICF) program in meeting the Nova Technical Contract goals established by the National Academy of Sciences in 1989, the Secretary requested a design using a solid-state laser driver operating at the third harmonic (0.35 {mu}m) of neodymium (Nd) glass. The participating ICF laboratories signed a Memorandum of Agreement in August 1993, and established a Project organization, including a technical team from the Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratories (SNL), and the Laboratory for Laser Energetics at the University of Rochester. Since then, the authors completed the NIF conceptual design, based on standard construction at a generic DOE Defense Program`s site, and issued a 7,000-page, 27-volume CDR in May 1994. Over the course of the conceptual design study, several other key documents were generated, including a Facilities Requirements Document, a Conceptual Design Scope and Plan, a Target Physics Design Document, a Laser Design Cost Basis Document, a Functional Requirements Document, an Experimental Plan for Indirect Drive Ignition, and a Preliminary Hazards Analysis (PHA) Document. DOE used the PHA to categorize the NIF as a low-hazard, non-nuclear facility. This article presents an overview of the NIF project.

  2. Facility for cold flow testing of solid rocket motor models

    Science.gov (United States)

    Bacchus, D. L.; Hill, O. E.; Whitesides, R. Harold

    1992-02-01

    A new cold flow test facility was designed and constructed at NASA Marshall Space Flight Center for the purpose of characterizing the flow field in the port and nozzle of solid propellant rocket motors (SRM's). A National Advisory Committee was established to include representatives from industry, government agencies, and universities to guide the establishment of design and instrumentation requirements for the new facility. This facility design includes the basic components of air storage tanks, heater, submicron filter, quiet control valve, venturi, model inlet plenum chamber, solid rocket motor (SRM) model, exhaust diffuser, and exhaust silencer. The facility was designed to accommodate a wide range of motor types and sizes from small tactical motors to large space launch boosters. This facility has the unique capability of testing ten percent scale models of large boosters such as the new Advanced Solid Rocket Motor (ASRM), at full scale motor Reynolds numbers. Previous investigators have established the validity of studying basic features of solid rocket motor development programs include the acquisition of data to (1) directly evaluate and optimize the design configuration of the propellant grain, insulation, and nozzle; and (2) provide data for validation of the computational fluid dynamics, (CFD), analysis codes and the performance analysis codes. A facility checkout model was designed, constructed, and utilized to evaluate the performance characteristics of the new facility. This model consists of a cylindrical chamber and converging/diverging nozzle with appropriate manifolding to connect it to the facility air supply. It was designed using chamber and nozzle dimensions to simulate the flow in a 10 percent scale model of the ASRM. The checkout model was recently tested over the entire range of facility flow conditions which include flow rates from 9.07 to 145 kg/sec (20 to 320 Ibm/sec) and supply pressure from 5.17 x 10 exp 5 to 8.27 x 10 exp 6 Pa. The

  3. Monitored retrievable storage facility site screening and evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1985-05-01

    The Nuclear Waste Policy Act of 1982 directs the Department of Energy to complete a detailed study of the need for and feasibility of, and to submit to the Congress a proposal for, the construction of one or more monitored retrievable storage facilities for high level radioactive waste and spent nuclear fuel.'' The Act directs that the proposal includes site specific designs. Further, the proposal is to include, for the first such facility, at least three alternative sites and at least five alternative combinations of such proposed site and facility designs...'' as well as a recommendation of the combination among the alternatives that the Secretary deems preferable.'' An MRS Site Screening Task Force has been formed to help identify and evaluated potential MRS facility sites within a preferred region and with the application of a siting process and criteria developed by the DOE. The activities of the task force presented in this report includes: site screening (Sections 3, 4, and 5), the MRS facilities which are to be sited are described; the criteria, process and outcome of the screening process is presented; and descriptions of the candidate MRS facility sites are given, and site evaluations (Sections 6 through 9) where the rational for the site evaluations are presented, along with each evaluation and findings of the Task Force.

  4. MAST Upgrade - Construction Status

    CERN Document Server

    Milnes, Joe; Dhalla, Fahim; Fishpool, Geoff; Hill, John; Katramados, Ioannis; Martin, Richard; Naylor, Graham; O'Gorman, Tom; Scannell, Rory

    2015-01-01

    The Mega Amp Spherical Tokamak (MAST) is the centre piece of the UK fusion research programme. In 2010, a MAST Upgrade programme was initiated with three primary objectives, to contribute to: 1) Testing reactor concepts (in particular exhaust solutions via a flexible divertor allowing Super-X and other extended leg configurations); 2) Adding to the knowledge base for ITER (by addressing important plasma physics questions and developing predictive models to help optimise ITER performance of ITER) and 3) Exploring the feasibility of using a spherical tokamak as the basis for a fusion Component Test Facility. With the project mid-way through its construction phase, progress will be reported on a number of the critical subsystems. This will include manufacture and assembly of the coils, armour and support structures that make up the new divertors, construction of the new set coils that make up the centre column, installation of the new power supplies for powering the divertor coils and enhanced TF coil set, progr...

  5. A human factors engineering evaluation of the Multi-Function Waste Tank Facility. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Donohoo, D.T. [Pacific Northwest Lab., Richland, WA (United States); Sarver, T.L. [ARES Corp., San Francisco, CA (United States)

    1995-06-05

    This report documents the methods and results of a human factors engineering (HFE) review conducted on the Multi-Function Waste Tank Facility (MWTF), Westinghouse Hanford Company (WHC) Project 236A, to be constructed at the U.S. Department of Energy (DOE) facility at Hanford, Washington. This HFE analysis of the MWTF was initiated by WHC to assess how well the current facility and equipment design satisfies the needs of its operations and maintenance staff and other potential occupants, and to identify areas of the design that could benefit from improving the human interfaces at the facility. Safe and effective operations, including maintenance, is a primary goal for the MWTF. Realization of this goal requires that the MWTF facility, equipment, and operations be designed in a manner that is consistent with the abilities and limitations of its operating personnel. As a consequence, HFE principles should be applied to the MWTF design, construction, its operating procedures, and its training. The HFE review was focused on the 200-West Area facility as the design is further along than that of the 200-East Area. The review captured, to the greatest extent feasible at this stage of design, all aspects of the facility activities and included the major topics generally associated with HFE (e.g., communication, working environment). Lessons learned from the review of the 200 West facility will be extrapolated to the 200-East Area, as well as generalized to the Hanford Site.

  6. Power Systems Development Facility. First quarterly report, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The objective of this project, herein referred to as the Power Systems Development Facility (PSDF), is to evaluate hot gas particle control technologies using coal derived gas streams. This project entails the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device (PCD) issues to be addressed include the integration of the PCDs into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size.

  7. Crowder College MARET Center Facility Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Rand, Amy

    2013-08-20

    This project was a research facility construction project and did not include actual research. The new facility will benefit the public by providing training opportunities for students, as well as incubator and laboratory space for entrepreneurs in the areas of alternative and renewable energies. The 9,216 -square-foot Missouri Alternative and Renewable Energy Technology (MARET) Center was completed in late 2011. Classes in the MARET Center began in the spring 2012 semester. Crowder College takes pride in the MARET Center, a focal point of the campus, as the cutting edge in education, applied research and commercial development in the growing field of green technology.

  8. Thermal energy storage test facility

    Science.gov (United States)

    Ternes, M. P.

    1980-01-01

    The thermal behavior of prototype thermal energy storage units (TES) in both heating and cooling modes is determined. Improved and advanced storage systems are developed and performance standards are proposed. The design and construction of a thermal cycling facility for determining the thermal behavior of full scale TES units is described. The facility has the capability for testing with both liquid and air heat transport, at variable heat input/extraction rates, over a temperature range of 0 to 280 F.

  9. National Ignition Facility project acquisition plan

    Energy Technology Data Exchange (ETDEWEB)

    Callaghan, R.W.

    1996-04-01

    The purpose of this National Ignition Facility Acquisition Plan is to describe the overall procurement strategy planned for the National Ignition Facility (NIF) Project. The scope of the plan describes the procurement activities and acquisition strategy for the following phases of the NIF Project, each of which receives either plant and capital equipment (PACE) or other project cost (OPC) funds: Title 1 and 2 design and Title 3 engineering (PACE); Optics manufacturing facilitization and pilot production (OPC); Convention facility construction (PACE); Procurement, installation, and acceptance testing of equipment (PACE); and Start-up (OPC). Activities that are part of the base Inertial Confinement Fusion (ICF) Program are not included in this plan. The University of California (UC), operating Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory, and Lockheed-Martin, which operates Sandia National Laboratory (SNL) and the University of Rochester Laboratory for Laser Energetics (UR-LLE), will conduct the acquisition of needed products and services in support of their assigned responsibilities within the NIF Project structure in accordance with their prime contracts with the Department of Energy (DOE). LLNL, designated as the lead Laboratory, will have responsibility for all procurements required for construction, installation, activation, and startup of the NIF.

  10. Military Construction: Process and Outcomes

    Science.gov (United States)

    2016-12-14

    barracks, schools, hospitals , child development centers, and other facilities needed to support U.S. military forces at home and overseas. This military...Atlantic Treaty Organization (NATO) Security Investment Program The 28 member states of NATO share the expense of common-use facilities by a formula...programs for the acquisition and construction of military facilities and installations and for related expenses for the collective defense of the

  11. A summary of recent activities at the National Solar Thermal Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, C.P.

    1992-09-01

    The United States Department of Energy`s National Solar Thermal Test Facility (NSTTF), located at Sandia National Laboratories in Albuquerque, New Mexico, is the major facility for testing of solar thermal components and systems in the United States. Since originally being constructed as the Central Receiver Test Facility in the late 1970`s, its mission has been expanded to include distributed receiver technologies, and it now includes line-focus and point-focus collectors, two solar furnaces, and an engine test facility. In addition, the unique capabilities of the facility have been applied to a wide variety of tests unrelated to solar energy, but using the intense heat from concentrated solar radiation or using the large-scale optical systems at the site. In this paper, current activities at the NSTTF are summarized, with an emphasis on activities that have not been described elsewhere.

  12. A summary of recent activities at the National Solar Thermal Test Facility

    Science.gov (United States)

    Cameron, C. P.

    The United States Department of Energy's National Solar Thermal Test Facility (NSTTF), located at Sandia National Laboratories in Albuquerque, New Mexico, is the major facility for testing of solar thermal components and systems in the United States. Since originally being constructed as the Central Receiver Test Facility in the late 1970's, its mission has been expanded to include distributed receiver technologies, and it now includes line-focus and point-focus collectors, two solar furnaces, and an engine test facility. In addition, the unique capabilities of the facility have been applied to a wide variety of tests unrelated to solar energy, but using the intense heat from concentrated solar radiation or using the large-scale optical systems at the site. In this paper, current activities at the NSTTF are summarized, with an emphasis on activities that have not been described elsewhere.

  13. A summary of recent activities at the National Solar Thermal Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, C.P.

    1992-01-01

    The United States Department of Energy's National Solar Thermal Test Facility (NSTTF), located at Sandia National Laboratories in Albuquerque, New Mexico, is the major facility for testing of solar thermal components and systems in the United States. Since originally being constructed as the Central Receiver Test Facility in the late 1970's, its mission has been expanded to include distributed receiver technologies, and it now includes line-focus and point-focus collectors, two solar furnaces, and an engine test facility. In addition, the unique capabilities of the facility have been applied to a wide variety of tests unrelated to solar energy, but using the intense heat from concentrated solar radiation or using the large-scale optical systems at the site. In this paper, current activities at the NSTTF are summarized, with an emphasis on activities that have not been described elsewhere.

  14. Submarine Escape Set Test Facilities

    Directory of Open Access Journals (Sweden)

    G.S.N. Murthy

    2009-07-01

    Full Text Available Submarine Escape Set (SES is used by submariners to escape from a sunken submarine. This set caters for breathing needs of the submariner under water, until he reaches the surface. Evaluation of such life-saving equipment is of paramount importance. This paper describes the submarine escape set and various constructional features and schedules of operation of test facilities designed indegenously and which can evaluate the SES. The test facility is divided into two parts: the reducer test facility, and the breathing bag test facility. The equipment has been rigorously tested and accepted by Indian Navy. Two such test facilities have been developed, one of which is installed at INS Satavahana, Visakhapatnam, and are working satisfactorily.

  15. FACET: The New User Facility at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, C.I.; Decker, F.J.; Erikson, R.; Hast, C.; Hogan, M.J.; Iverson, R.; Li, S.Z.; Nosochkov, Y.; Phinney, N.; Sheppard, J.; Wienands, U.; Woodley, M.; Yocky, G.; /SLAC; Seryi, A.; /Oxford U., JAI; Wittmer, W.; /Michigan State U.

    2011-12-13

    FACET (Facility for Advanced Accelerator and Experimental Tests) is a new User Facility at SLAC National Accelerator Laboratory. Its high power electron and positron beams make it a unique facility, ideal for beam-driven Plasma Wakefield Acceleration studies. The first 2 km of the SLAC linac produce 23 GeV, 3.2 nC electron and positron beams with short bunch lengths of 20 {mu}m. A final focusing system can produce beam spots 10 {mu}m wide. User-aided Commissioning took place in summer 2011 and FACET will formally come online in early 2012. We present the User Facility, the current features, planned upgrades and the opportunities for further experiments. Accelerators are our primary tool for discovering the fundamental laws to the universe. Each new frontier we probe requires a new, more powerful method. Accelerators are therefore increasing in size and cost. The future of this field requires new accelerating techniques that can reach the high energies required over shorter distances. New concepts for high gradient acceleration include utilizing the wakes in plasma and dielectric and metallic structures. FACET was built to provide a test bed for novel accelerating concepts with its high charge and highly compressed beams. As a test facility unlike any other, it has also attracted groups interested in beam diagnostic techniques and terahertz studies. The first phase of the construction was completed in May 2011. Beam commissioning began in June and was interleaved with the installation of five experiments. Users were invited to aid with the commissioning for the month of August during which time experimental hardware and software were checked out and some first measurements were taken. FACET is currently in the process of becoming a Department of Energy User Facility for High Energy Physics.

  16. 44 CFR 331.5 - Production facilities.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Production facilities. 331.5... AND FACILITIES IN LABOR SURPLUS AREAS § 331.5 Production facilities. All Federal departments and... production facilities, including expansion, to the extent that such selection is consistent with existing law...

  17. A combined cycle engine test facility

    Energy Technology Data Exchange (ETDEWEB)

    Engers, R.; Cresci, D.; Tsai, C. [General Applied Science Laboratories Inc., Ronkonkoma, NY (United States)

    1995-09-01

    Rocket-Based Combined-Cycle (RBCC) engines intended for missiles and/or space launch applications incorporate features of rocket propulsion systems operating in concert with airbreathing engine cycles. Performance evaluation of these types of engines, which are intended to operate from static sea level take-off to supersonic cruise or accerlerate to orbit, requires ground test capabilities which integrate rocket component testing with airbreathing engine testing. A combined cycle engine test facility has been constructed in the General Applied Science Laboratories, Inc. (GASL) Aeropropulsion Test Laboratory to meet this requirement. The facility was designed to support the development of an innovative combined cycle engine concept which features a rocket based ramjet combustor. The test requirements included the ability to conduct tests in which the propulsive force was generated by rocket only, the ramjet only and simultaneous rocket and ramjet power (combined cycle) to evaluate combustor operation over the entire engine cycle. The test facility provides simulation over the flight Mach number range of 0 to 8 and at various trajectories. The capabilities of the combined cycle engine test facility are presented.

  18. Sustainability Base Construction Update

    Science.gov (United States)

    Mewhinney, Michael

    2012-01-01

    Construction of the new Sustainability Base Collaborative support facility, expected to become the highest performing building in the federal government continues at NASA's Ames Research Center, Moffet Field, Calif. The new building is designed to achieve a platinum rating under the leadership in Energy and Environment Design (LEED) new construction standards for environmentally sustainable construction developed by the U. S. Green Building Council, Washington, D. C. When completed by the end of 2011, the $20.6 million building will feature near zero net energy consumption, use 90 percent less potable water than conventionally build buildings of equivalent size, and will result in reduced building maintenance costs.

  19. The ITER project construction status

    Science.gov (United States)

    Motojima, O.

    2015-10-01

    The pace of the ITER project in St Paul-lez-Durance, France is accelerating rapidly into its peak construction phase. With the completion of the B2 slab in August 2014, which will support about 400 000 metric tons of the tokamak complex structures and components, the construction is advancing on a daily basis. Magnet, vacuum vessel, cryostat, thermal shield, first wall and divertor structures are under construction or in prototype phase in the ITER member states of China, Europe, India, Japan, Korea, Russia, and the United States. Each of these member states has its own domestic agency (DA) to manage their procurements of components for ITER. Plant systems engineering is being transformed to fully integrate the tokamak and its auxiliary systems in preparation for the assembly and operations phase. CODAC, diagnostics, and the three main heating and current drive systems are also progressing, including the construction of the neutral beam test facility building in Padua, Italy. The conceptual design of the Chinese test blanket module system for ITER has been completed and those of the EU are well under way. Significant progress has been made addressing several outstanding physics issues including disruption load characterization, prediction, avoidance, and mitigation, first wall and divertor shaping, edge pedestal and SOL plasma stability, fuelling and plasma behaviour during confinement transients and W impurity transport. Further development of the ITER Research Plan has included a definition of the required plant configuration for 1st plasma and subsequent phases of ITER operation as well as the major plasma commissioning activities and the needs of the accompanying R&D program to ITER construction by the ITER parties.

  20. Full Service Included

    Institute of Scientific and Technical Information of China (English)

    ISABELDING

    2005-01-01

    At the beginning of the 1990s, with the opening of the market, foreign real estate consultants began to enter China. At that time, they mainly provided services such as facility management to the local clients, with their other functions seldom noticed and utilized. However, with the booming development of China's real estate market, foreign real estate consultants have become more and more important to the local developers.

  1. Seq2Logo: a method for construction and visualization of amino acid binding motifs and sequence profiles including sequence weighting, pseudo counts and two-sided representation of amino acid enrichment and depletion

    DEFF Research Database (Denmark)

    Thomsen, Martin Christen Frølund; Nielsen, Morten

    2012-01-01

    Seq2Logo is a web-based sequence logo generator. Sequence logos are a graphical representation of the information content stored in a multiple sequence alignment (MSA) and provide a compact and highly intuitive representation of the position-specific amino acid composition of binding motifs, active...... sites, etc. in biological sequences. Accurate generation of sequence logos is often compromised by sequence redundancy and low number of observations. Moreover, most methods available for sequence logo generation focus on displaying the position-specific enrichment of amino acids, discarding the equally...... valuable information related to amino acid depletion. Seq2logo aims at resolving these issues allowing the user to include sequence weighting to correct for data redundancy, pseudo counts to correct for low number of observations and different logotype representations each capturing different aspects...

  2. Ultraviolet Free Electron Laser Facility preliminary design report

    Energy Technology Data Exchange (ETDEWEB)

    Ben-Zvi, I. [ed.

    1993-02-01

    This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, but have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).

  3. Ultraviolet Free Electron Laser Facility preliminary design report

    Energy Technology Data Exchange (ETDEWEB)

    Ben-Zvi, I. (ed.)

    1993-02-01

    This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, but have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).

  4. Mound facility physical characterization

    Energy Technology Data Exchange (ETDEWEB)

    Tonne, W.R.; Alexander, B.M.; Cage, M.R.; Hase, E.H.; Schmidt, M.J.; Schneider, J.E.; Slusher, W.; Todd, J.E.

    1993-12-01

    The purpose of this report is to provide a baseline physical characterization of Mound`s facilities as of September 1993. The baseline characterizations are to be used in the development of long-term future use strategy development for the Mound site. This document describes the current missions and alternative future use scenarios for each building. Current mission descriptions cover facility capabilities, physical resources required to support operations, current safety envelope and current status of facilities. Future use scenarios identify potential alternative future uses, facility modifications required for likely use, facility modifications of other uses, changes to safety envelope for the likely use, cleanup criteria for each future use scenario, and disposition of surplus equipment. This Introductory Chapter includes an Executive Summary that contains narrative on the Functional Unit Material Condition, Current Facility Status, Listing of Buildings, Space Plans, Summary of Maintenance Program and Repair Backlog, Environmental Restoration, and Decontamination and Decommissioning Programs. Under Section B, Site Description, is a brief listing of the Site PS Development, as well as Current Utility Sources. Section C contains Site Assumptions. A Maintenance Program Overview, as well as Current Deficiencies, is contained within the Maintenance Program Chapter.

  5. Fuzzy case based reasoning in sports facilities unit cost estimating

    Science.gov (United States)

    Zima, Krzysztof

    2016-06-01

    This article presents an example of estimating costs in the early phase of the project using fuzzy case-based reasoning. The fragment of database containing descriptions and unit cost of sports facilities was shown. The formulas used in Case Based Reasoning method were presented, too. The article presents similarity measurement using a few formulas, including fuzzy similarity. The outcome of cost calculations based on CBR method was presented as a fuzzy number of unit cost of construction work.

  6. ISIS Facility – Past achievements and future prospects

    Indian Academy of Sciences (India)

    Uschi Steigenberger

    2008-11-01

    The current status of the ISIS Pulsed Neutron and Muon Facility will be described covering operations and developments. Construction of a second target station was approved in 2004 including funding for the first seven neutron scattering instruments. Progress with the second target station project will be reviewed and updates on the design status of the seven `Day One' instruments, as well as plans for the next phase of the instrumentation will be presented.

  7. 41 CFR 101-8.310 - New construction.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true New construction. 101-8... FINANCIAL ASSISTANCE 8.3-Discrimination Prohibited on the Basis of Handicap § 101-8.310 New construction. (a) Design and construction. Each facility or part of a facility constructed by, on behalf of, or for the...

  8. FACILITIES MANAGEMENT AT CERN

    CERN Multimedia

    2002-01-01

    Recently we have been confronted with difficulties concerning services which are part of a new contract for facilities management. Please see below for some information about this contract. Following competitive tendering and the Finance Committee decision, the contract was awarded to the Swiss firm 'Facilities Management Network (FMN)'. The owners of FMN are two companies 'M+W Zander' and 'Avireal', both very experienced in this field of facilities management. The contract entered into force on 1st July 2002. CERN has grouped together around 20 different activities into this one contract, which was previously covered by separate contracts. The new contract includes the management and execution of many activities, in particular: Guards and access control; cleaning; operation and maintenance of heating plants, cooling and ventilation equipment for buildings not related to the tunnel or the LHC; plumbing; sanitation; lifts; green areas and roads; waste disposal; and includes a centralised helpdesk for these act...

  9. Proposal for multi-agency facility : High Desert Interagency Partnership

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a proposal to construct a multi-agency facility to house the High Desert Interagency Partnership. The facility would be on federally owned land in Hines,...

  10. Sandwich construction

    Science.gov (United States)

    Marshall, A.

    A form of composites known as structural sandwich construction is presented in terms of materials used, design details for solving edging and attachment problems, and charts of design material analysis. Sandwich construction is used in nearly all commercial airliners and helicopters, and military air and space vehicles, and it is shown that this method can stiffen a structure without causing a weight increase. The facing material can be made of 2024 or 7075 aluminum alloy, titanium, or stainless steel, and the core material can be wood or foam. The properties of paper honeycomb and various aluminum alloy honeycombs are presented. Factors pertaining to adhesive materials are discussed, including products given off during cure, bonding pressure, and adaptability. Design requirements and manufacturing specifications are resolved using numerous suggestions.

  11. Fireplace construction

    Energy Technology Data Exchange (ETDEWEB)

    Billmeyer, T.F.; Faehling, F.L.

    1979-05-08

    A prebuilt fireplace construction for installation in a building structure, such as a mobile home, is presented. The construction includes a firebox having an open side and a combustion gas outlet adapted to be placed in fluid communication with a flue. A transparent door is provided for substantially sealing the open side and a housing at least partially surrounds the firebox in close proximity thereto to define an air space therebetween. The air space has a relatively low inlet and a relatively high outlet. A conduit isolated from the air space is provided and is adapted to be placed in fluid communication with a source of outside air. The conduit opens into the firebox to provide combustion air. A baffle is interposed between the opening of the conduit into the firebox and the combustion area thereof.

  12. 构建设施型精准化循环水养殖系统的技术研究%Study on the construction of the facility type precision recirculating aquaculture system

    Institute of Scientific and Technical Information of China (English)

    牛化欣; 常杰; 雷霁霖; 贾玉东

    2014-01-01

    鉴于当前水资源短缺、环境恶化、水产养殖业高速发展,以及保障食品安全等问题的不断呈现,促使资源型工厂化流水养殖模式急需向高效型循环水养殖方向转变,这是产业发展提升的必然趋势。本文以工业化养殖理念为指导、节能减排为目标,以鲆鲽类产业技术体系构建的循环水养殖模式为样板,按循环水养殖系统(RAS)的设计原理,优化养殖工艺流程,构建一种设施型精准化的RAS,并初步分析探讨了海水鱼类在此集成系统中的应用效果。该系统将为广大水产养殖企业提供一种建设成本低廉、系统运行稳定可控、容易管理的实用新型养殖模式,也可为下一步发展现代水产精准养殖工程体系提供理论和实践依据。%With the hot problem of the deepening of water shortage,environmental degrada-tion,efficient development of aquaculture,food safety and security,etc,which makes that the resource-based factory farming water is gradually an urgent need to efficient type recirculating aquaculture change. In this paper,industrialized farming concept as a guide,energy saving and emission reduction targets to agro-industrial technology research of flatfish system has been based on the model-based recirculating aquaculture systems(RAS)design principles to build accurate“conserving facility type”RAS,optimize their breeding process,and preliminary ex-ploration of marine fish in this integrated system. Low build the system for the majority of aqua-culture enterprises to provide a construction cost,the system is stable,practical farming model is easy to manage,but also for the further development of aquaculture in the establishment of modern precision engineering system to provide basic theory.

  13. Snow-melting facilities capable of meeting multiple needs. Present state and future tasks in a Ministry of Construction jurisdiction in Tohoku District; Tohoku chiken kannai ni okeru doro shoyusetsu shisetsu no genjo to kadai

    Energy Technology Data Exchange (ETDEWEB)

    Tezuka, N. [Ministry of Construction, Tokyo (Japan)

    1997-11-01

    Novel snow-melting facilities in use in Tohoku District, Japan, are described. One operates on a heat source in which heat is generated in the composting process. Grass, cattle droppings, and clay as a fermentation promoter are blended, and the blend is allowed to ferment. The obtained heat travels through a non-freezing liquid serving as a heater exchanger, and fed into snow-melting pipes. Laboratory tests are conducted, and it is found that the best fermentation occurs when the compost is a blend of 20% glass and 80% cattle droppings. At the air temperature of 0-5degC, heat is continuously emitted at approximately 40degC. This system may prove to be feasible when 40-50m{sup 2} is the size of the area to cover. The disposal of compost and the management of grass are the tasks to be dealt with in the future. The other utilizes wind force. Power produced by a wind turbine is used for road heating and tunnel lighting, and operates sight line guidance. The wind turbine introduced here outputs 250kW, producing a yearly total of 489.2kW. There is a plan for a verification test using a small wind power generator. Future tasks include the sale of surplus power, measures for noise reduction, and measures for preventing an adverse impact on TV, etc. 2 figs., 3 tabs.

  14. Spent Nuclear Fuel Project path forward: nuclear safety equivalency to comparable NRC-licensed facilities

    Energy Technology Data Exchange (ETDEWEB)

    Garvin, L.J.

    1995-11-01

    This document includes the Technical requirements which meet the nuclear safety objectives of the NRC regulations for fuel treatment and storage facilities. These include requirements regarding radiation exposure limits, safety analysis, design and construction. This document also includes administrative requirements which meet the objectives of the major elements of the NRC licensing process. These include formally documented design and safety analysis, independent technical review, and oppportunity for public involvement.

  15. Data Management Facility Operations Plan

    Energy Technology Data Exchange (ETDEWEB)

    Keck, Nicole N

    2014-06-30

    The Data Management Facility (DMF) is the data center that houses several critical Atmospheric Radiation Measurement (ARM) Climate Research Facility services, including first-level data processing for the ARM Mobile Facilities (AMFs), Eastern North Atlantic (ENA), North Slope of Alaska (NSA), Southern Great Plains (SGP), and Tropical Western Pacific (TWP) sites, as well as Value-Added Product (VAP) processing, development systems, and other network services.

  16. Technical Safety Requirements for the Waste Storage Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Larson, H L

    2007-09-07

    areas, consisting of buildings, tents, other structures, and open areas as described in Chapter 2 of the DSA. Section 2.4 of the DSA provides an overview of the buildings, structures, and areas in the WASTE STORAGE FACILITIES, including construction details such as basic floor plans, equipment layout, construction materials, controlling dimensions, and dimensions significant to the hazard and accident analysis. Chapter 5 of the DSA documents the derivation of the TSRs and develops the operational limits that protect the safety envelope defined for the WASTE STORAGE FACILITIES. This TSR document is applicable to the handling, storage, and treatment of hazardous waste, TRU WASTE, LLW, mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste received or generated in the WASTE STORAGE FACILITIES. Section 5, Administrative Controls, contains those Administrative Controls necessary to ensure safe operation of the WASTE STORAGE FACILITIES. Programmatic Administrative Controls are in Section 5.6. This Introduction to the WASTE STORAGE FACILITIES TSRs is not part of the TSR limits or conditions and contains no requirements related to WASTE STORAGE FACILITIES operations or to the safety analyses of the DSA.

  17. J-PARC muon facility, MUSE

    Science.gov (United States)

    Miyake, Y.; Shimomura, K.; Kawamura, N.; Strasser, P.; Makimura, S.; Koda, A.; Fujimori, H.; Nakahara, K.; Takeshita, S.; Kobayashi, Y.; Nishiyama, K.; Higemoto, W.; Ito, T. U.; Ninomiya, K.; Kato, M.; Kadono, R.; Sato, N.; Nagamine, K.

    2010-04-01

    The muon science facility (MUSE, abbreviation of MUon Science Establishment), along with the neutron, hadron, and neutrino facilities, is one of the experimental areas of the J-PARC project, which was approved for construction in a period from 2001 to 2008. The MUSE facility is located in the Materials and Life Science Facility (MLF), which is a building integrated to include both neutron and muon science programs. Construction of the MLF building was started in the beginning of 2004, and was completed at the end of the 2006 fiscal year. For Phase 1, we managed to install one super-conducting decay/surface muon channel with a modest-acceptance (about 45 mSr) pion injector in the summer of 2008. Finally, on September 19th, 2008, the 20 mm thick edge-cooled, non-rotating graphite target, which is surrounded by a copper frame, was, for the first time, placed into the 3GeV proton beam obtained from the rapid cycling synchrotron (RCS). The nuclear reactions between the 3 GeV proton beam and the nucleus of carbon produce both positively (π+) and negatively (π-) charged pions. On September 26th, 2008, we finally succeeded to extract? surface muons (μ+), which are obtained from the decay of π+ near the surface of the pion production target in the proton beam line. First, we commissioned the secondary muon beam line optics by tuning the superconducting magnet, the quadrupole and bending magnets, and the DC separator in order to optimize the transport of the surface muon beam and to eliminate the e+ contamination. Then, on December 25th, 2008, we also succeeded in the extraction of the "decay muons (μ+/μ-)", which are obtained through the in-flight decay of π+/π-

  18. Mineral facilities of Europe

    Science.gov (United States)

    Almanzar, Francisco; Baker, Michael S.; Elias, Nurudeen; Guzman, Eric

    2010-01-01

    This map displays over 1,700 records of mineral facilities within the countries of Europe and western Eurasia. Each record represents one commodity and one facility type at a single geographic location. Facility types include mines, oil and gas fields, and plants, such as refineries, smelters, and mills. Common commodities of interest include aluminum, cement, coal, copper, gold, iron and steel, lead, nickel, petroleum, salt, silver, and zinc. Records include attributes, such as commodity, country, location, company name, facility type and capacity (if applicable), and latitude and longitude geographical coordinates (in both degrees-minutes-seconds and decimal degrees). The data shown on this map and in table 1 were compiled from multiple sources, including (1) the most recently available data from the U.S. Geological Survey (USGS) Minerals Yearbook (Europe and Central Eurasia volume), (2) mineral statistics and information from the USGS Minerals Information Web site (http://minerals.usgs.gov/minerals/pubs/country/europe.html), and (3) data collected by the USGS minerals information country specialists from sources, such as statistical publications of individual countries, annual reports and press releases of operating companies, and trade journals. Data reflect the most recently published table of industry structure for each country at the time of this publication. Additional information is available from the country specialists listed in table 2.

  19. Facilities: The Tech Edge.

    Science.gov (United States)

    Farmer, Lesley S. J.

    2002-01-01

    Examines the impact of technology on school library facilities and suggests some low-impact ways to optimize its use. Highlights include considering the role technology can play; educational goals; interior environmental factors; circulation desk needs; security; storage for hardware and software; handicapped accessibility; and future planning.…

  20. Aerothermodynamic Analysis of a Coanda/Refraction Jet Engine Test Facility

    Science.gov (United States)

    1988-12-01

    envi- ronmental concerns. Specific objectives include: [Ref. 1: p. 1] " Establish a range of construction quality levels to optimize facility design...eoidening) 9 to 95% 401C Aleeulion Pleasure 000SWe5 o oor fw’rm 0to IWl o water. 00 ~ Indoo OWfrom 1 i tl20 lncd fWOWer P fro- to 250) Pa. 10 Pa from

  1. Facility effluent monitoring plan for the 327 Facility

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-11-01

    The 327 Facility [Post-Irradiation Testing Laboratory] provides office and laboratory space for Pacific Northwest Laboratory (PNL) scientific and engineering staff conducting multidisciplinary research in the areas of post-irradiated fuels and structural materials. The facility is designed to accommodate the use of radioactive and hazardous materials in the conduct of these activities. This report summarizes the airborne emissions and liquid effluents and the results of the Facility Effluent Monitoring Plan (FEMP) determination for the facility. The complete monitoring plan includes characterization of effluent streams, monitoring/sampling design criteria, a description of the monitoring systems and sample analysis, and quality assurance requirements.

  2. (abstract) Cryogenic Telescope Test Facility

    Science.gov (United States)

    Luchik, T. S.; Chave, R. G.; Nash, A. E.

    1995-01-01

    An optical test Dewar is being constructed with the unique capability to test mirrors of diameter less than or equal to 1 m, f less than or equal to 6, at temperatures from 300 to 4.2 K with a ZYGO Mark IV interferometer. The design and performance of this facility will be presented.

  3. SNOLAB: Review of the facility and experiments

    Science.gov (United States)

    Ford, R.

    2012-09-01

    SNOLAB is Canada's new state of the art facility for astroparticle physics and is an expansion of the highly successful Sudbury Neutrino Observatory (SNO) located near Sudbury, Ontario. Situated 2070m underground (6010m mwe), SNOLAB is the deepest ultra-clean facility in the world, and is a leading location for conducting frontier experiments in astroparticle physics with rare event and low background detectors. The laboratory has 4980m2 of climate-controlled class-2000 clean-room space, a chilled water loop, ultra-pure water, nitrogen cover gas, fire detection and suppression, with personnel and refuge facilities for over 80 occupants. The surface building also provides 520 m2 of clean-room space for detector assembly, chemistry and optics labs, low background counting, and also includes a warehouse, machine shop, offices, and meeting rooms. Current experiments under construction include detectors for cosmological dark matter (COUPP, DEAP, MiniCLEAN, PICASSO), neutrino-less double-beta decay (EXO, SNO+), solar neutrinos, geo-neutrinos, and reactor neutrinos (SNO+), and supernovae monitoring (HALO), in addition to other experiment collaborations with proposals requesting space.

  4. Lightweight composites for modular panelized construction

    Science.gov (United States)

    Vaidya, Amol S.

    Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction

  5. Emission Facilities - Erosion & Sediment Control Facilities

    Data.gov (United States)

    NSGIC Education | GIS Inventory — An Erosion and Sediment Control Facility is a DEP primary facility type related to the Water Pollution Control program. The following sub-facility types related to...

  6. Comparison of the socioeconomic impacts of international fuel service centers versus dispersed nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Braid, Jr., R. B.

    1979-01-01

    The paper investigates a variety of community impacts including: public services, fiscal issues, economic matters, land and water use, political and social cohesion, and legal considerations. Comparisons of socioeconomic impacts of colocated versus dispersed sites are made on the basis of the size of the impacted communities, the size and type of nuclear facility, and the facility's construction time frame. The paper concludes that, under similar circumstances, most of the socioeconomic impacts of colocated nuclear facilities would be somewhat less than the sum of the impacts associated with equivalent dispersed sites. While empirical data is non-existent, the paper contends, however, that because the socioeconomic impacts of colocated facilities are so great and readily identifiable to a public unskilled in making comparisons with the dispersed alternative, the facilities will likely generate so much public opposition that IFSCs will probably prove infeasible.

  7. Conceptual Design Report for Remote-Handled Low-Level Waste Disposal Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lisa Harvego; David Duncan; Joan Connolly; Margaret Hinman; Charles Marcinkiewicz; Gary Mecham

    2010-10-01

    This conceptual design report addresses development of replacement remote-handled low-level waste disposal capability for the Idaho National Laboratory. Current disposal capability at the Radioactive Waste Management Complex is planned until the facility is full or until it must be closed in preparation for final remediation (approximately at the end of Fiscal Year 2017). This conceptual design report includes key project assumptions; design options considered in development of the proposed onsite disposal facility (the highest ranked alternative for providing continued uninterrupted remote-handled low level waste disposal capability); process and facility descriptions; safety and environmental requirements that would apply to the proposed facility; and the proposed cost and schedule for funding, design, construction, and operation of the proposed onsite disposal facility.

  8. Constructed Wetlands

    Science.gov (United States)

    these systems can improve water quality, engineers and scientists construct systems that replicate the functions of natural wetlands. Constructed wetlands are treatment systems that use natural processes

  9. The Case for an Underground Neutrino Facility in South Africa

    Science.gov (United States)

    Vilakazi, Zeblon

    2017-01-01

    Experiments in physics, Astro-particle physics and cosmology that require careful shielding against cosmic rays includes dark matter searches, studies of radioactive decays, and neutrino detection experiments. The need for such shielding has motivated the construction of laboratory caverns in mines and adjacent to tunnels under mountains. There are currently about a dozen such laboratories, in existence or under construction, all in the Northern Hemisphere. A motivation has been made for the establishment of a Southern Hemisphere facility. In this paper a feasibility study of measurements of radon in air (using electret ion chambers and alpha spectroscopy), background gamma ray measurements (inside/outside) the tunnel using scintillator (inorganic) detectors, cosmic ray measurements using organic scintillators and radiometric analyses of representative rock samplesfor the establishment of such a facility in the South Africa is presented. Keywords: Underground laboratory, Neutrinos, Gamma ray, Radon, Dark matter, Background.

  10. The electrodeless Lorentz force (ELF) thruster experimental facility

    Science.gov (United States)

    Weber, T. E.; Slough, J. T.; Kirtley, D.

    2012-11-01

    An innovative facility for testing high-power, pulsed plasmoid thrusters has been constructed to develop the electrodeless Lorentz force (ELF) thruster concept. It is equipped with a suite of diagnostics optimized to study the physical processes taking place within ELF and evaluate its propulsive utility including magnetic field, neutral gas, and plasma flux diagnostics, a method to determine energy flow into the plasma from the pulsed power systems, and a new type of ballistic pendulum, which enables thrust to be measured without the need for installing the entire propulsion system on a thrust stand. Variable magnetic fields allow controlled studies of plume expansion in a small-scale experiment and dielectric chamber walls reduce electromagnetic influences on plasma behavior and thruster operation. The unique capabilities of this facility enable novel concept development to take place at greatly reduced cost and increased accessibility compared to testing at large user-facilities.

  11. Facility information management system; Shisetsu joho kanri system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    A facility management system (FMS) was developed as a tool for efficiently operating and managing building facilities and related equipment. The maintenance management data is designed to be collected through automatic formation of data base by using a work flow function and releasing the daily business from paper work. The data base thus formed can be retrieved and displayed by utilizing a network system. The plan view for construction facilities is made a minute plan comparable to the ground plan by taking in DXF type drawing data such as a completion drawing, making it a colored display for example to create an intuitive expression understandable at first sight. The plan is controlled by the level including equipment classification and is capable of superimposed display. Detailed management data is displayed by mouse clicking of registered icons, allowing required information to be readily taken out. (translated by NEDO)

  12. Design Study of Beijing XFEL Test Facility

    CERN Document Server

    Dai, J P

    2005-01-01

    As R&D of X-ray Free Electron Laser facility in China, the construction of Beijing XFEL Test Facility (BTF) has been proposed. And the start to end simulation of BTF was made with codes PARMELA, ELEGANT and TDA. This paper presents the motivation, the scheme and the simulation results of BTF.

  13. Springfield Processing Plant (SPP) Facility Information

    Energy Technology Data Exchange (ETDEWEB)

    Leach, Janice; Torres, Teresa M.

    2012-10-01

    The Springfield Processing Plant is a hypothetical facility. It has been constructed for use in training workshops. Information is provided about the facility and its surroundings, particularly security-related aspects such as target identification, threat data, entry control, and response force data.

  14. 7 CFR 1738.19 - Facilities financed.

    Science.gov (United States)

    2010-01-01

    ... broadband loans to finance broadband facilities leased under the terms of a capital lease as defined in... under the terms of an operating lease as defined in generally accepted accounting principles. (c) RUS... Facilities financed. (a) RUS makes broadband loans to finance the construction, improvement, and...

  15. Does PDC Belong in Facilities Management?

    Science.gov (United States)

    Dessoff, Alan

    2012-01-01

    Whether planning, design, and construction (PDC) of buildings should be part of facilities management, with its traditional operations and maintenance functions, or separated from it, has been a divisive question on many campuses for a long time. Now, although it is not happening everywhere, facilities managers at a number of institutions, public…

  16. Establishing nuclear facility drill programs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The purpose of DOE Handbook, Establishing Nuclear Facility Drill Programs, is to provide DOE contractor organizations with guidance for development or modification of drill programs that both train on and evaluate facility training and procedures dealing with a variety of abnormal and emergency operating situations likely to occur at a facility. The handbook focuses on conducting drills as part of a training and qualification program (typically within a single facility), and is not intended to included responses of personnel beyond the site boundary, e.g. Local or State Emergency Management, Law Enforcement, etc. Each facility is expected to develop its own facility specific scenarios, and should not limit them to equipment failures but should include personnel injuries and other likely events. A well-developed and consistently administered drill program can effectively provide training and evaluation of facility operating personnel in controlling abnormal and emergency operating situations. To ensure the drills are meeting their intended purpose they should have evaluation criteria for evaluating the knowledge and skills of the facility operating personnel. Training and evaluation of staff skills and knowledge such as component and system interrelationship, reasoning and judgment, team interactions, and communications can be accomplished with drills. The appendices to this Handbook contain both models and additional guidance for establishing drill programs at the Department`s nuclear facilities.

  17. Decision and Order in the matter of a joint application by De Beers Canada Inc., Hydro One Networks Inc. and Five Nations Energy Inc. for an Order or Orders pursuant to section 92 of the Ontario Energy Board Act, 1998 granting leave to construct transmission facilities that will connect De Beers Canada Inc.'s planned Victor Diamond Mine, located approximately 90 kilometers west of Attawapiskat, to Ontario's transmission grid[In the matter of the Ontario Energy Board Act, 1998, S.O. 1998, c. 15, Schedule B

    Energy Technology Data Exchange (ETDEWEB)

    Chaplin, C.; Nowina, P.; Sommerville, P.

    2005-07-18

    De Beers Canada Inc. plans to open the Victor Mine, a new diamond mine located 90 km west of the First Nations community of Attawapiskat in Northern Ontario. Both Hydro One and Five Nations Energy Inc. (FNEI) are the licensed power transmitters in the area. As such, these 3 stakeholders jointly applied to the Ontario Energy Board in late December 2004 to construct certain power transmission facilities. This application refers to the construction of transmission facilities that will connect De Beers' proposed Victor Mine to FNEI's transmission system. The joint application was revised in April 2005 to propose the construction of a 100 km single circuit 115 kV transmission line with 477 kilo-circular-mil (kcmil) conductor between the Victor Mine and FNEI's transformer station at Attawapiskat. It also proposed a 170 km single circuit 115 kV transmission line with 477 kcmil conductor between the transmission station at Kashechewan and Hydro One's Moosonee Switching Station and a 144 km of single circuit 115 kV transmission line with 795 kcmil conductor between Hydro One's Moosonee switching station and Hydro One's facilities at Otter Rapids generating station. The project also includes a new transmission station and associated facilities at the Victor Mine, modifications to FNEI's transmission stations at Attawapiskat and Kashechewan, and modifications to Hydro One's Moosonee switching station and facilities at Otter Rapids generating station. The estimated cost of the proposed facilities is $93.6 million. The Board noted that the project is needed to provide electrical supply to the Mine in 2007. The Board also examined whether the capital costs and operating, maintenance and administrative costs for the project were reasonable. It questioned what impact the project will have on transmission rates, and on reliability of supply. It also questioned whether the joint applicants have taken measures to mitigate power losses on the

  18. National Cryo-Electron Microscopy Facility

    Science.gov (United States)

    Information about the National Cryo-EM Facility at NCI, created to provide researchers access to the latest cryo-EM technology for high resolution imaging. Includes timeline for installation and how to access the facility.

  19. Magnet facility credits communication for success.

    Science.gov (United States)

    2008-03-01

    Task forces include ancillary departments, so key messages can be spread to the entire facility. Dashboards display performance information on system, facility, and unit levels. Multiple publications reinforce education on key quality improvement goals.

  20. Environmental report for the Gasification Product Improvement Facility (GPIF)

    Energy Technology Data Exchange (ETDEWEB)

    Sadowski, R.S.; Skinner, W.H.; Norris, E.S.; Duck, R.R.; Hass, R.B.; Morgan, M.E.; Helble, J.J.; Johnson, S.A.

    1993-01-01

    The Fossil Energy Program has a mission to develop energy systems that utilize national coal resources in power systems with increased efficiency and environmental compatibility. Coal gasification technology is a versatile candidate that meets this goal. This two phased project consists primarily of the design, construction and operation of a 5-foot inside diameter (minimum) fixed-bed gasifier called PyGas{trademark} and supporting infrastructure (Phase I), and an additional follow on phase consisting of the design, construction and operation of a hot fuel gas cleanup unit (Phase II). Issues expected to be successfully overcome by PyGas{trademark} through its application in this test facility include the processing of high-swelling coals, which causes agglomeration in conventional fixed-bed gasifiers. Such coals comprise 87% of all eastern coals. Other issues expected to be eliminated or significantly reduced include: production of ash clinkers, production of ammonia, the presence of significant tars and fines, and the volatilization of alkalinity in the product fuel gas. A second portion of the NEPA report is concerned with the emission of toxic metal compounds by the gasification process improvement facility (GPIF). The GPIF facility will be located on site at the Fort Martin facility of Allegheny Power Company, and the energy produced (steam) will be directly used by Fort Martin to produce electricity. The coal used at the GPIF facility will be the same coal used by the utility. Therefore, the emissions of the GPIF will be put in context of the entire facility. The GPIF assessment will be divided into four sections: Estimation of the toxic metals content of the raw coal; calculation of the emissions from Fort Martin normally; an estimate of the emission from the GPIF; and a comparison of the two flows.

  1. Low emissions combustor test facility

    Energy Technology Data Exchange (ETDEWEB)

    Maloney, D.J.; Hadley, M.S.; Norton, T.S.

    1993-12-01

    The Morgantown Energy Technology Center (METC) is in the process of constructing a low emissions combustor test and research (LECTR) facility designed to support the development of low emissions gas turbine combustion systems fired on natural gas and coal derived gaseous fuels containing fuel bound nitrogen. The LECTR facility is a major test station located within METC`s new combustion facility. The heart of this test station is a 60 centimeter (24 inch) diameter, refractory lined pressure vessel made up of a series of flanged modules. The facility design offers the flexibility to test a variety of low emissions combustion concepts at pressures up to 3 MPa (30 atm). Upon completion of fabrication and shake-down testing in January of 1994, the facility will be available for use by industrial and university partners through Cooperative Research and Development Agreements (CRADAs) or through other cooperative arrangements. This paper is intended to describe the LECTR facility and associated operating parameter ranges and to inform interested parties of the facility availability.

  2. FRACTURING FLUID CHARACTERIZATION FACILITY

    Energy Technology Data Exchange (ETDEWEB)

    Subhash Shah

    2000-08-01

    Hydraulic fracturing technology has been successfully applied for well stimulation of low and high permeability reservoirs for numerous years. Treatment optimization and improved economics have always been the key to the success and it is more so when the reservoirs under consideration are marginal. Fluids are widely used for the stimulation of wells. The Fracturing Fluid Characterization Facility (FFCF) has been established to provide the accurate prediction of the behavior of complex fracturing fluids under downhole conditions. The primary focus of the facility is to provide valuable insight into the various mechanisms that govern the flow of fracturing fluids and slurries through hydraulically created fractures. During the time between September 30, 1992, and March 31, 2000, the research efforts were devoted to the areas of fluid rheology, proppant transport, proppant flowback, dynamic fluid loss, perforation pressure losses, and frictional pressure losses. In this regard, a unique above-the-ground fracture simulator was designed and constructed at the FFCF, labeled ''The High Pressure Simulator'' (HPS). The FFCF is now available to industry for characterizing and understanding the behavior of complex fluid systems. To better reflect and encompass the broad spectrum of the petroleum industry, the FFCF now operates under a new name of ''The Well Construction Technology Center'' (WCTC). This report documents the summary of the activities performed during 1992-2000 at the FFCF.

  3. Geothermal energy conversion facility

    Energy Technology Data Exchange (ETDEWEB)

    Kutscher, C.F.

    1997-12-31

    With the termination of favorable electricity generation pricing policies, the geothermal industry is exploring ways to improve the efficiency of existing plants and make them more cost-competitive with natural gas. The Geothermal Energy Conversion Facility (GECF) at NREL will allow researchers to study various means for increasing the thermodynamic efficiency of binary cycle geothermal plants. This work has received considerable support from the US geothermal industry and will be done in collaboration with industry members and utilities. The GECF is being constructed on NREL property at the top of South Table Mountain in Golden, Colorado. As shown in Figure 1, it consists of an electrically heated hot water loop that provides heating to a heater/vaporizer in which the working fluid vaporizes at supercritical or subcritical pressures as high as 700 psia. Both an air-cooled and water-cooled condenser will be available for condensing the working fluid. In order to minimize construction costs, available equipment from the similar INEL Heat Cycle Research Facility is being utilized.

  4. Air Quality Facilities

    Data.gov (United States)

    Iowa State University GIS Support and Research FacilityFacilities with operating permits for Title V of the Federal Clean Air Act, as well as facilities required to submit an air emissions inventory, and other facilities...

  5. Economic impacts of noxious facilities: Incorporating the effects of risk aversion

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.

    1993-09-01

    Developing new sites for noxious facilities has become a complex process with many potential pitfalls. In addition to the need to negotiate conditions acceptable to the host community, siting success may depend on the facility proposer`s ability to identify a candidate site that not only meets technical requirements, but that is located in a community or region whose population is not highly averse to the risks associated with the type of facility being proposed. Success may also depend on the proposer accurately assessing potential impacts of the facility and offering an equitable compensation package to the people affected by it. Facility impact assessments, as typically performed, include only the effects of changes in population, employment and economic activity associated with facility construction and operation. Because of their scope, such assessments usually show a short-run, net economic benefit for the host region, making the intensely negative public reaction to some types and locations of facilities seem unreasonable. The impact component excluded from these assessments is the long-run economic effect of public perceptions of facility risk and nuisance characteristics. Recent developments in psychological and economic measurement techniques have opened the possibility of correcting this flaw by incorporating public perceptions in projections of economic impacts from noxious facilities.

  6. Construction management

    CERN Document Server

    Pellicer, Eugenio; Teixeira, José C; Moura, Helder P; Catalá, Joaquín

    2014-01-01

    The management of construction projects is a wide ranging and challenging discipline in an increasingly international industry, facing continual challenges and demands for improvements in safety, in quality and cost control, and in the avoidance of contractual disputes. Construction Management grew out of a Leonardo da Vinci project to develop a series of Common Learning Outcomes for European Managers in Construction. Financed by the European Union, the project aimed to develop a library of basic materials for developing construction management skills for use in a pan-European context. Focused exclusively on the management of the construction phase of a building project from the contractor's point of view, Construction Management covers the complete range of topics of which mastery is required by the construction management professional for the effective delivery of new construction projects. With the continued internationalisation of the construction industry, Construction Management will be required rea...

  7. Control Surveys for Underground Construction of the Superconducting Super Collider

    Energy Technology Data Exchange (ETDEWEB)

    Greening, W.J.Trevor; Robinson, Gregory L.; /Measurment Science Inc.; Robbins, Jeffrey S.; Ruland, Robert E.; /SLAC

    2005-08-16

    Particular care had to be taken in the design and implementation of the geodetic control systems for the Superconducting Super Collider (SSC) due to stringent accuracy requirements, the demanding tunneling schedule, long duration and large size of the construction effort of the project. The surveying requirements and the design and implementation of the surface and underground control scheme for the precise location of facilities which include approximately 120 km of bored tunnel are discussed. The methodology used for the densification of the surface control networks, the technique used for the transfer of horizontal and vertical control into the underground facilities, and the control traverse scheme employed in the tunnels is described.

  8. Control Surveys for Underground Construction of the Superconducting Super Collider

    Energy Technology Data Exchange (ETDEWEB)

    Greening, W.J.Trevor; Robinson, Gregory L.; /Measurment Science Inc.; Robbins, Jeffrey S.; Ruland, Robert E.; /SLAC

    2005-08-16

    Particular care had to be taken in the design and implementation of the geodetic control systems for the Superconducting Super Collider (SSC) due to stringent accuracy requirements, the demanding tunneling schedule, long duration and large size of the construction effort of the project. The surveying requirements and the design and implementation of the surface and underground control scheme for the precise location of facilities which include approximately 120 km of bored tunnel are discussed. The methodology used for the densification of the surface control networks, the technique used for the transfer of horizontal and vertical control into the underground facilities, and the control traverse scheme employed in the tunnels is described.

  9. Proceedings of the international workshop on hadron facility technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiessen, H.A. (comp.)

    1987-12-01

    The conference included papers on facility plans, beam dynamics, accelerator hardware, and experimental facilities. Individual abstracts were prepared for 43 papers in the conference proceedings. (LEW)

  10. Medical Isotope Production Analyses In KIPT Neutron Source Facility

    Energy Technology Data Exchange (ETDEWEB)

    Talamo, Alberto [Argonne National Lab. (ANL), Argonne, IL (United States); Gohar, Yousry [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    Medical isotope production analyses in Kharkov Institute of Physics and Technology (KIPT) neutron source facility were performed to include the details of the irradiation cassette and the self-shielding effect. An updated detailed model of the facility was used for the analyses. The facility consists of an accelerator-driven system (ADS), which has a subcritical assembly using low-enriched uranium fuel elements with a beryllium-graphite reflector. The beryllium assemblies of the reflector have the same outer geometry as the fuel elements, which permits loading the subcritical assembly with different number of fuel elements without impacting the reflector performance. The subcritical assembly is driven by an external neutron source generated from the interaction of 100-kW electron beam with a tungsten target. The facility construction was completed at the end of 2015, and it is planned to start the operation during the year of 2016. It is the first ADS in the world, which has a coolant system for removing the generated fission power. Argonne National Laboratory has developed the design concept and performed extensive design analyses for the facility including its utilization for the production of different radioactive medical isotopes. 99Mo is the parent isotope of 99mTc, which is the most commonly used medical radioactive isotope. Detailed analyses were performed to define the optimal sample irradiation location and the generated activity, for several radioactive medical isotopes, as a function of the irradiation time.

  11. Smooth Operator - Mobile Information Technology for Improved Flow at the Construction Site

    DEFF Research Database (Denmark)

    Tambo, Torben

    2010-01-01

    and industry for an updated and forward looking comprehension, and view of tendencies, of the roles and potentials of mobile IT at the construction site including potential for further research. Qualitative and interpretive methodology inspired by information systems and sociology of research and construction...... and micro mobility (the site); additionally systems designed for the construction site are used in increasingly adjacent industries: Architects, engineers, facility management, insurance, etc. The ambiguousness of mobile IT on the construction site strongly supports further research within this field using...

  12. Scientific user facilities at Oak Ridge National Laboratory: New research capabilities and opportunities

    Science.gov (United States)

    Roberto, James

    2011-10-01

    Over the past decade, Oak Ridge National Laboratory (ORNL) has transformed its research infrastructure, particularly in the areas of neutron scattering, nanoscale science and technology, and high-performance computing. New facilities, including the Spallation Neutron Source, Center for Nanophase Materials Sciences, and Leadership Computing Facility, have been constructed that provide world-leading capabilities in neutron science, condensed matter and materials physics, and computational physics. In addition, many existing physics-related facilities have been upgraded with new capabilities, including new instruments and a high- intensity cold neutron source at the High Flux Isotope Reactor. These facilities are operated for the scientific community and are available to qualified users based on competitive peer-reviewed proposals. User facilities at ORNL currently welcome more than 2,500 researchers each year, mostly from universities. These facilities, many of which are unique in the world, will be reviewed including current and planned research capabilities, availability and operational performance, access procedures, and recent research results. Particular attention will be given to new neutron scattering capabilities, nanoscale science, and petascale simulation and modeling. In addition, user facilities provide a portal into ORNL that can enhance the development of research collaborations. The spectrum of partnership opportunities with ORNL will be described including collaborations, joint faculty, and graduate research and education.

  13. Thermohydraulic study of a MTR fuel element aimed at the construction of an irradiation facility; Estudo termohidraulico de um elemento combustivel tipo MTR visando a construcao de um dispositivo de irradiacao

    Energy Technology Data Exchange (ETDEWEB)

    Coragem, Helio Boemer de Oliveira

    1980-07-01

    A thermohydraulic study of MTR fuel element is presented as a basic requirement for the development of an irradiation facility for testing fuel elements. A computer code named 'Thermo' has been developed for this purpose, which can stimulate different working conditions, such as, cooling, power elements and neutron flux, performing all pertinent thermohydraulic calculations. Thermocouples were used to measure the temperature gradients of the cooling fluid throughout the IEAR-1 reactor core. All experimental data are in good agreement with the theoretical model applied in this work. Finally, a draft of the proposed facility and its safety system is presented. (author)

  14. Facility effluent monitoring plan for the 325 Facility

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The Applied Chemistry Laboratory (325 Facility) houses radiochemistry research, radioanalytical service, radiochemical process development, and hazardous and mixed hazardous waste treatment activities. The laboratories and specialized facilities enable work ranging from that with nonradioactive materials to work with picogram to kilogram quantities of fissionable materials and up to megacurie quantities of other radionuclides. The special facilities include two shielded hot-cell areas that provide for process development or analytical chemistry work with highly radioactive materials, and a waste treatment facility for processing hazardous, mixed, low-level, and transuranic wastes generated by Pacific Northwest Laboratory. Radioactive material storage and usage occur throughout the facility and include a large number of isotopes. This material is in several forms, including solid, liquid, particulate, and gas. Some of these materials are also heated during testing which can produce vapors. The research activities have been assigned to the following activity designations: High-Level Hot Cell, Hazardous Waste Treatment Unit, Waste Form Development, Special Testing Projects, Chemical Process Development, Analytical Hot Cell, and Analytical Chemistry. The following summarizes the airborne and liquid effluents and the results of the Facility Effluent Monitoring Plan (FEMP) determination for the facility. The complete monitoring plan includes characterization of effluent streams, monitoring/sampling design criteria, a description of the monitoring systems and sample analysis, and quality assurance requirements.

  15. Technical Safety Requirements for the Waste Storage Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Laycak, D T

    2010-03-05

    of buildings, tents, other structures, and open areas as described in Chapter 2 of the DSA. Section 2.4 of the DSA provides an overview of the buildings, structures, and areas in the WASTE STORAGE FACILITIES, including construction details such as basic floor plans, equipment layout, construction materials, controlling dimensions, and dimensions significant to the hazard and accident analysis. Chapter 5 of the DSA documents the derivation of the TSRs and develops the operational limits that protect the safety envelope defined for the WASTE STORAGE FACILITIES. This TSR document is applicable to the handling, storage, and treatment of hazardous waste, TRU WASTE, LLW, mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste received or generated in the WASTE STORAGE FACILITIES. Section 5, Administrative Controls, contains those Administrative Controls necessary to ensure safe operation of the WASTE STORAGE FACILITIES. Programmatic Administrative Controls are in Section 5.4.

  16. Technical Safety Requirements for the Waste Storage Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Laycak, D T

    2008-06-16

    , consisting of buildings, tents, other structures, and open areas as described in Chapter 2 of the DSA. Section 2.4 of the DSA provides an overview of the buildings, structures, and areas in the WASTE STORAGE FACILITIES, including construction details such as basic floor plans, equipment layout, construction materials, controlling dimensions, and dimensions significant to the hazard and accident analysis. Chapter 5 of the DSA documents the derivation of the TSRs and develops the operational limits that protect the safety envelope defined for the WASTE STORAGE FACILITIES. This TSR document is applicable to the handling, storage, and treatment of hazardous waste, TRU WASTE, LLW, mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste received or generated in the WASTE STORAGE FACILITIES. Section 5, Administrative Controls, contains those Administrative Controls necessary to ensure safe operation of the WASTE STORAGE FACILITIES. Programmatic Administrative Controls are in Section 5.6.

  17. Validating MEDIQUAL Constructs

    Science.gov (United States)

    Lee, Sang-Gun; Min, Jae H.

    In this paper, we validate MEDIQUAL constructs through the different media users in help desk service. In previous research, only two end-users' constructs were used: assurance and responsiveness. In this paper, we extend MEDIQUAL constructs to include reliability, empathy, assurance, tangibles, and responsiveness, which are based on the SERVQUAL theory. The results suggest that: 1) five MEDIQUAL constructs are validated through the factor analysis. That is, importance of the constructs have relatively high correlations between measures of the same construct using different methods and low correlations between measures of the constructs that are expected to differ; and 2) five MEDIQUAL constructs are statistically significant on media users' satisfaction in help desk service by regression analysis.

  18. 5-Megawatt solar-thermal test facility: environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-01-30

    An Environmental Assessment of the 5 Megawatt Solar Thermal Test Facility (STTF) is presented. The STTF is located at Albuquerque, New Mexico. The facility will have the capability for testing scale models of major subsystems comprising a solar thermal electrical power plant. The STTF capabilities will include testing a solar energy collector subsystem comprised of heliostat arrays, a receiver subsystem which consists of a boiler/superheater in which a working fluid is heated, and a thermal storage subsystem which includes tanks of high heat capacity material which stores thermal energy for subsequent use. The STTF will include a 200-foot receiver tower on which experimental receivers will be mounted. The Environmental Assessment describes the proposed STTF, its anticipated benefits, and the environment affected. It also evaluates the potential environmental impacts associated with STTF construction and operation.

  19. Constructing Catalonia

    Directory of Open Access Journals (Sweden)

    Bill Philips

    2009-07-01

    Full Text Available Catalonia, in common with other nations, has long been concerned with the question of identity and difference. Its problematic relationship with Spain has led to an emphasis on differentiating itself from its larger neighbour (if we are to accept, as most Spaniards do not, that Catalonia is not Spain, a situation complicated by the loss of the Spanish colonies of Cuba and The Philippines in 1898, and the Spanish Civil War and subsequent dictatorship from 1936 to 1976. Beginning in the late nineteenth century, the construction of a Catalan identity followed a similar route to that taken by other European nations such as England, Ireland and, indeed, Spain, including an emphasis on rural values, activities and the countryside, and the conversion of specifically local traditions into national past times. It is only in the last ten years or so that this model of Catalan identity has been recognised for what it is – a model constructed and encouraged for and by specific nationalist political interests. Ironically, Catalonia’s identity abroad has also been constructed and manipulated for political purposes, but from quite a different perspective. Orwell’s /Homage to Catalonia/ (1938 narrates an extremely blinkered version of the Spanish Civil War which has achieved iconic status as a result of cold war politics. Subsequent portrayals of the Spanish Civil War – Valentine Cunningham’s /The Penguin Book of Spanish Civil War Verse/ (ed., Penguin, 1980, or Ken Loach’s 1995 film /Land and Freedom/ base their arguments unquestioningly on /Homage to Catalonia/, perpetuating a view of the nation’s recent history that is both reductive and inaccurate

  20. Perimeter security for Minnesota correctional facilities

    Energy Technology Data Exchange (ETDEWEB)

    Crist, D. [Minnesota Department of Corrections, St. Paul, MN (United States); Spencer, D.D. [Sandia National Labs., Albuquerque, NM (United States)

    1996-12-31

    For the past few years, the Minnesota Department of Corrections, assisted by Sandia National Laboratories, has developed a set of standards for perimeter security at medium, close, and maximum custody correctional facilities in the state. During this process, the threat to perimeter security was examined and concepts about correctional perimeter security were developed. This presentation and paper will review the outcomes of this effort, some of the lessons learned, and the concepts developed during this process and in the course of working with architects, engineers and construction firms as the state upgraded perimeter security at some facilities and planned new construction at other facilities.

  1. Liberia_WADC00004_OHDR_Health_Facilities2010

    Data.gov (United States)

    United Nations Cartographic Section — This data is based on the survey questionnaire, which are included in the table belowWhat county is this facility in?What is the facility name?Is this facility a...

  2. Experimenting with Science Facility Design.

    Science.gov (United States)

    Butterfield, Eric

    1999-01-01

    Discusses the modern school science facility and how computers and teaching methods are changing their design. Issues include power, lighting, and space requirements; funding for planning; architect assessment; materials requirements for work surfaces; and classroom flexibility. (GR)

  3. Environmental Protection Agency (EPA) Facilities

    Data.gov (United States)

    Department of Homeland Security — This SEGS layer shows the names, locations and biographical information of EPA facilities in the U.S. and its territories. Included in this layer are headquarters...

  4. The Test Facility for the EAST Superconducting Magnets

    Institute of Scientific and Technical Information of China (English)

    Wu Yu; Weng Peide

    2005-01-01

    A large facility for testing superconducting magnets has been in operation at the Institute of Plasma Physics of the Chinese Academy of Sciences since the completion of its construction that began in 1999. A helium refrigerator is used to cool the magnets and liquefy helium which can provide 3.8 K ~ 4.5 K, 1.8 bar ~ 5 bar, 20 g/s ~ 40 g/s supercritical helium for the coils or a 150 L/h liquefying helium capacity. Other major parts include a large vacuum vessel (3.5 m in diameter and 6.1 m in height) with a liquid nitrogen temperature shield, two pairs of current lead,three sets of 14.5 kA~ 50 kA power supply with a fast dump quench protection circuitry, a data acquisition and control system, a vacuum pumping system, and a gas tightness inspecting devise.The primary goal of the test facility is to test the EAST TF and PF magnets in relation to their electromagnetic, stability, thermal, hydraulic, and mechanical performance. The construction of this facility was completed in 2002, followed by a series of systematic coil testing. By now ten TF magnets, a central solenoid model coil, a central solenoid prototype coil, and a model coil of the PF large coil have been successfully tested in the facility.

  5. The Test Facility for the EAST Superconducting Magnets

    Science.gov (United States)

    Wu, Yu; Weng, Peide

    2005-08-01

    A large facility for testing superconducting magnets has been in operation at the Institute of Plasma Physics of the Chinese Academy of Sciences since the completion of its construction that began in 1999. A helium refrigerator is used to cool the magnets and liquefy helium which can provide 3.8 K-4.5 K, 1.8 bar-5 bar, 20 g/s-40 g/s supercritical helium for the coils or a 150 L/h liquefying helium capacity. Other major parts include a large vacuum vessel (3.5 m in diameter and 6.1 m in height) with a liquid nitrogen temperature shield, two pairs of current lead, three sets of 14.5 kA-50 kA power supply with a fast dump quench protection circuitry, a data acquisition and control system, a vacuum pumping system, and a gas tightness inspecting devise. The primary goal of the test facility is to test the EAST TF and PF magnets in relation to their electromagnetic, stability, thermal, hydraulic, and mechanical performance. The construction of this facility was completed in 2002, followed by a series of systematic coil testing. By now ten TF magnets, a central solenoid model coil, a central solenoid prototype coil, and a model coil of the PF large coil have been successfully tested in the facility.

  6. 建设宁夏固原市原州区2012年头营生态移民点设施农业供水工程迫在眉睫%The Original ZhouOu 2012 Years the Construction of the Ecological Immigration Point Facilities Agricultural Water Supply Project is Imminent

    Institute of Scientific and Technical Information of China (English)

    魏铎

    2012-01-01

      2012 year camp ecological immigration point facilities after the implementation of agricultural water supply project, can effectively guarantee demonstration garden of irrigation water, the high-tech agricultural facilities construction and production smoothly, and has very important economic and social benefits.%  2012年宁夏固原市原州区头营生态移民点设施农业供水工程实施后,可有效的保证示范园区的灌溉用水,使园区的高科技设施农业的建设和生产得以顺利进行,具有十分重要的经济效益和社会效益。

  7. Compendium of engineering geology. Including fundamentals of soil and rock mechanics, and of earthwork, foundation engineering, tunneling, and land fill construction. 2. rev. and enlarged ed. Abriss der Ingenieurgeologie. Mit Grundlagen der Boden- und Felsmechanik, des Erd-, Grund- und Tunnelbaus sowie der Abfalldeponien

    Energy Technology Data Exchange (ETDEWEB)

    Prinz, H. (Hessisches Landesamt fuer Bodenforschung, Wiesbaden (Germany))

    1991-01-01

    The complex and intercisciplinary nature of the subject area of engineering geology does not easily lend itself to being summarised and condensed into textbook, but the approach chosen by the author has produced a textbook of use and value both from the theoretical and from the practical point of view. The book proceeds from the fundamentals of engineering geology, as e.g. exploration and investigation methods, or physical and chemical interactive processes in the underground, to specific engineering work such as earthwork, foundation and tunnel construction. The revised, second edition is up to date with the developments and new findings of the last few years. These also include the problems and possible solutions involved in landfill construction and management, not to forget radwaste repositories, and in the management of long-standing soil pollution, which are treated in a specific, new chapter. The author has taken great care to elucidate the interdisciplinary features. (orig.) With 352 figs., 74 tabs.

  8. Fiber-Optic Sensor Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Constructs and evaluates fiber-optic sensors for a variety of measurands. These measurands include acoustic, pressure, magnetic, and electric field as well...

  9. Applying lean thinking in construction

    OpenAIRE

    Remon Fayek Aziz; Sherif Mohamed Hafez

    2013-01-01

    The productivity of the construction industry worldwide has been declining over the past 40 years. One approach for improving the situation is using lean construction. Lean construction results from the application of a new form of production management to construction. Essential features of lean construction include a clear set of objectives for the delivery process, aimed at maximizing performance for the customer at the project level, concurrent design, construction, and the application of...

  10. Optical modulator including grapene

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  11. Performance specifications for proton medical facility

    Energy Technology Data Exchange (ETDEWEB)

    Chu, W.T.; Staples, J.W.; Ludewigt, B.A.; Renner, T.R.; Singh, R.P.; Nyman, M.A.; Collier, J.M.; Daftari, I.K.; Petti, P.L.; Alonso, J.R. [Lawrence Berkeley Lab., CA (United States); Kubo, H.; Verhey, L.J. [University of California Davis Medical Center, Sacramento, CA (United States). Cancer Center]|[California Univ., San Francisco, CA (United States). School of Medicine; Castro, J.R. [Lawrence Berkeley Lab., CA (United States)]|[University of California Davis Medical Center, Sacramento, CA (United States). Cancer Center]|[California Univ., San Francisco, CA (United States). School of Medicine

    1993-03-01

    Performance specifications of technical components of a modern proton radiotherapy facility are presented. The technical items specified include: the accelerator; the beam transport system including rotating gantry; the treatment beamline systems including beam scattering, beam scanning, and dosimetric instrumentation; and an integrated treatment and accelerator control system. Also included are treatment ancillary facilities such as diagnostic tools, patient positioning and alignment devices, and treatment planning systems. The facility specified will accommodate beam scanning enabling the three-dimensional conformal therapy deliver .

  12. Orientation to pollution prevention for facility design

    Energy Technology Data Exchange (ETDEWEB)

    Raney, E.A.; Whitehead, J.K.; Encke, D.B. [Westinghouse Hanford Co., Richland, WA (United States); Dorsey, J.A. [Kaiser Engineers Hanford Co., Richland, WA (United States)

    1994-01-01

    This material was developed to assist engineers in incorporating pollution prevention into the design of new or modified facilities within the U.S. Department of Energy (DOE). The material demonstrates how the design of a facility can affect the generation of waste throughout a facility`s entire life and it offers guidance on how to prevent the generation of waste during design. Contents include: Orientation to pollution prevention for facility design training course booklet; Pollution prevention design guideline; Orientation to pollution prevention for facility design lesson plan; Training participant survey and pretest; and Training facilitator`s guide and schedule.

  13. LEXICOGRAPHICAL ACHIEVEMENTS AND PROSPECTS OF THE CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    YEVSEEVA G. P.

    2016-09-01

    Full Text Available The main objective of the scientific and technical language - describe, explain, describe the natural and social processes and phenomena, technical facilities. Despite the large number of works devoted to the issues of terminology, linguistics still has a reasonable and well-established theory of the term, not fully elucidated interaction terminological vocabulary words from other layers in scientific and technical texts, not fully explored some terminological lexical layers, including construction terminology

  14. 45 CFR 605.23 - New construction.

    Science.gov (United States)

    2010-10-01

    ... Standards (USAF) (appendix A to 41 CFR subpart 101-19.6) shall be deemed to comply with the requirements of... 45 Public Welfare 3 2010-10-01 2010-10-01 false New construction. 605.23 Section 605.23 Public... Accessibility § 605.23 New construction. (a) Design and construction. Each facility or part of a...

  15. 46 CFR 108.235 - Construction.

    Science.gov (United States)

    2010-10-01

    ... limit drop test in 14 CFR 29.725, or a load of not less than 75 percent of the helicopter maximum weight... 46 Shipping 4 2010-10-01 2010-10-01 false Construction. 108.235 Section 108.235 Shipping COAST... Construction and Arrangement Helicopter Facilities § 108.235 Construction. (a) Each helicopter deck must...

  16. 34 CFR 104.23 - New construction.

    Science.gov (United States)

    2010-07-01

    ...) (Appendix A to 41 CFR subpart 101-19.6) shall be deemed to comply with the requirements of this section with... 34 Education 1 2010-07-01 2010-07-01 false New construction. 104.23 Section 104.23 Education... Accessibility § 104.23 New construction. (a) Design and construction. Each facility or part of a...

  17. 14 CFR 1251.302 - New construction.

    Science.gov (United States)

    2010-01-01

    ... Standards (USAF) (appendix A to 41 CFR subpart 101-19.6) shall be deemed to comply with the requirements of... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false New construction. 1251.302 Section 1251.302... Accessibility § 1251.302 New construction. (a) Design and construction. Each facility or part of a...

  18. 40 CFR 7.70 - New construction.

    Science.gov (United States)

    2010-07-01

    ... Uniform Federal Accessibility Standards (USAF) (appendix A to 41 CFR subpart 101-19.6) shall be deemed to... 40 Protection of Environment 1 2010-07-01 2010-07-01 false New construction. 7.70 Section 7.70... of Handicap § 7.70 New construction. (a) General. New facilities shall be designed and constructed...

  19. Fireplace construction

    Energy Technology Data Exchange (ETDEWEB)

    Billmeyer, T.F.

    1978-10-03

    A prebuilt fireplace construction for installation in a building structure includes a firebox having an open forward side and an outlet for combustion gases and a housing at least partially surrounding the firebox with the combustion gas outlet extending through the top of the housing. A rotatable damper is disposed within the housing and is controlled externally by a rotatable shaft extending forwardly through the housing which is engaged by an external actuator operable from the front of the fireplace. An inlet conduit for combustion air is built into the housing for the fireplace beneath the level of the firebox for supply of combustion air to the firebox in the event doors are later added to close off the firebox.

  20. Visual Impairment, Including Blindness

    Science.gov (United States)

    ... Who Knows What? Survey Item Bank Search for: Visual Impairment, Including Blindness Links updated, April 2017 En ... doesn’t wear his glasses. Back to top Visual Impairments in Children Vision is one of our ...

  1. Usability Constructs

    DEFF Research Database (Denmark)

    Hertzum, Morten; Clemmesen, Torkil; Hornbæk, Kasper Anders Søren

    2007-01-01

    Whereas research on usability predominantly employs universal definitions of the aspects that comprise usability, people experience their use of information systems through personal constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affecte...

  2. CERN radiation protection (RP) calibration facilities

    Energy Technology Data Exchange (ETDEWEB)

    Pozzi, Fabio

    2016-04-14

    Radiation protection calibration facilities are essential to ensure the correct operation of radiation protection instrumentation. Calibrations are performed in specific radiation fields according to the type of instrument to be calibrated: neutrons, photons, X-rays, beta and alpha particles. Some of the instruments are also tested in mixed radiation fields as often encountered close to high-energy particle accelerators. Moreover, calibration facilities are of great importance to evaluate the performance of prototype detectors; testing and measuring the response of a prototype detector to well-known and -characterized radiation fields contributes to improving and optimizing its design and capabilities. The CERN Radiation Protection group is in charge of performing the regular calibrations of all CERN radiation protection devices; these include operational and passive dosimeters, neutron and photon survey-meters, and fixed radiation detectors to monitor the ambient dose equivalent, H*(10), inside CERN accelerators and at the CERN borders. A new state-of-the-art radiation protection calibration facility was designed, constructed and commissioned following the related ISO recommendations to replace the previous ageing (more than 30 years old) laboratory. In fact, the new laboratory aims also at the official accreditation according to the ISO standards in order to be able to release certified calibrations. Four radiation fields are provided: neutrons, photons and beta sources and an X-ray generator. Its construction did not only involve a pure civil engineering work; many radiation protection studies were performed to provide a facility that could answer the CERN calibration needs and fulfill all related safety requirements. Monte Carlo simulations have been confirmed to be a valuable tool for the optimization of the building design, the radiation protection aspects, e.g. shielding, and, as consequence, the overall cost. After the source and irradiator installation

  3. Electrochemical construction

    Science.gov (United States)

    Einstein, Harry; Grimes, Patrick G.

    1983-08-23

    An electrochemical cell construction features a novel co-extruded plastic electrode in an interleaved construction with a novel integral separator-spacer. Also featured is a leak and impact resistant construction for preventing the spill of corrosive materials in the event of rupture.

  4. Dry Well Storage Facility conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    The Dry Well Storage Facility described is assumed to be located adjacent to or near a Spent Fuel Receiving and Packaging Facility and/or a Packaged Fuel Transfer Facility. Performance requirements, quality levels and codes and standards, schedule and methods of performance, special requirements, quality assurance program, and cost estimate are discussed. Appendices on major mechanical equipment and electric power requirements are included.

  5. 7 CFR 51.57 - Facilities.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Facilities. 51.57 Section 51.57 Agriculture... Requirements for Plants Operating Under Continuous Inspection on A Contract Basis § 51.57 Facilities. Each packing plant shall be equipped with adequate sanitary facilities and accommodations, including but not...

  6. 50 CFR 260.100 - Facilities.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Facilities. 260.100 Section 260.100... Basis 1 § 260.100 Facilities. Each official establishment shall be equipped with adequate sanitary facilities and accommodations, including, but not being limited to, the following: (a) Containers approved...

  7. 24 CFR 891.315 - Prohibited facilities.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Prohibited facilities. 891.315... Housing for Persons With Disabilities § 891.315 Prohibited facilities. This section shall apply to capital... facilities may not include infirmaries, nursing stations, spaces dedicated to the delivery of...

  8. 24 CFR 891.220 - Prohibited facilities.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Prohibited facilities. 891.220 Section 891.220 Housing and Urban Development Regulations Relating to Housing and Urban Development... Housing for the Elderly § 891.220 Prohibited facilities. Projects may not include facilities...

  9. Canastota Renewable Energy Facility Project

    Energy Technology Data Exchange (ETDEWEB)

    Blake, Jillian; Hunt, Allen

    2013-12-13

    The project was implemented at the Madison County Landfill located in the Town of Lincoln, Madison County, New York. Madison County has owned and operated the solid waste and recycling facilities at the Buyea Road site since 1974. At the onset of the project, the County owned and operated facilities there to include three separate landfills, a residential solid waste disposal and recycled material drop-off facility, a recycling facility and associated administrative, support and environmental control facilities. This putrescible waste undergoes anaerobic decomposition within the waste mass and generates landfill gas, which is approximately 50% methane. In order to recover this gas, the landfill was equipped with gas collection systems on both the east and west sides of Buyea Road which bring the gas to a central point for destruction. In order to derive a beneficial use from the collected landfill gases, the County decided to issue a Request for Proposals (RFP) for the future use of the generated gas.

  10. Research on the construction of 3D management system on sanitation facilities in Fenghua%奉化市环卫设施三维管理系统建设研究

    Institute of Scientific and Technical Information of China (English)

    许建宣

    2013-01-01

    介绍城市环卫设施三维管理信息系统的开发技术路线、系统架构、网络架构、数据库设计和功能设计等内容.将虚拟现实技术引入系统开发中,实现环卫设施信息的三维化、信息化管理,提高城市环卫的信息化管理水平.%It presents the technological trend of development,system framwork,database design and functional design of the 3D management system on sanitation facilities in Fenghua.The virtual reality technology is introduced into the system development in order to realize 3D information management of the sanitation facilities,and to improve the urban sanitation management level of information.

  11. Facility design consequences of different employees’ quality perceptions

    NARCIS (Netherlands)

    Kok, H.B.; Mobach, M.P.; Omta, S.W.F.

    2015-01-01

    An important challenge for facility management is to integrate the complex and comprehensive construct of different service processes and physical elements of the service facility into a meaningful and functional facility design. The difficulty of this task is clearly indicated by the present study

  12. New Mexico's Model for Funding School Facilities' Greatest Needs

    Science.gov (United States)

    Gorrell, Robert; Salamone, Frank

    2011-01-01

    The New Mexico Public Schools Facilities Authority (NM-PSFA) is a relatively small state agency (50 staff members) that manages the allocation of funding for public school facilities in the state while assisting school districts and state-chartered charter schools in facility planning, construction, and maintenance. Like the majority of other…

  13. Facility design consequences of different employees’ quality perceptions

    NARCIS (Netherlands)

    Kok, H.B.; Mobach, M.P.; Omta, S.W.F.

    2015-01-01

    An important challenge for facility management is to integrate the complex and comprehensive construct of different service processes and physical elements of the service facility into a meaningful and functional facility design. The difficulty of this task is clearly indicated by the present study

  14. Facility for testing ice drills

    Science.gov (United States)

    Nielson, Dennis L.; Delahunty, Chris; Goodge, John W.; Severinghaus, Jeffery P.

    2017-05-01

    The Rapid Access Ice Drill (RAID) is designed for subsurface scientific investigations in Antarctica. Its objectives are to drill rapidly through ice, to core samples of the transition zone and bedrock, and to leave behind a borehole observatory. These objectives required the engineering and fabrication of an entirely new drilling system that included a modified mining-style coring rig, a unique fluid circulation system, a rod skid, a power unit, and a workshop with areas for the storage of supplies and consumables. An important milestone in fabrication of the RAID was the construction of a North American Test (NAT) facility where we were able to test drilling and fluid processing functions in an environment that is as close as possible to that expected in Antarctica. Our criteria for site selection was that the area should be cold during the winter months, be located in an area of low heat flow, and be at relatively high elevation. We selected a site for the facility near Bear Lake, Utah, USA. The general design of the NAT well (NAT-1) started with a 27.3 cm (10.75 in.) outer casing cemented in a 152 m deep hole. Within that casing, we hung a 14 cm (5.5 in.) casing string, and, within that casing, a column of ice was formed. The annulus between the 14 and 27.3 cm casings provided the path for circulation of a refrigerant. After in-depth study, we chose to use liquid CO2 to cool the hole. In order to minimize the likelihood of the casing splitting due to the volume increase associated with freezing water, the hole was first cooled and then ice was formed in increments from the bottom upward. First, ice cubes were placed in the inner liner and then water was added. Using this method, a column of ice was incrementally prepared for drilling tests. The drilling tests successfully demonstrated the functioning of the RAID system. Reproducing such a facility for testing of other ice drilling systems could be advantageous to other research programs in the future.

  15. Planning and design of additional East Mesa Geothermal Test Facilities. Phase 1B. Volume II. Procurement package

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, R.O.

    1976-10-15

    Procurement packages of technical specifications and construction drawings for eleven test facility additions to the ERDA East Mesa Geothermal Component Test Facility are presented. Each of the specifications includes all of the technical requirements needed for procurement and construction starting with Division 2. The information is presented under the following subject headings: injection pump system: 52-2 injection pipeline; control and instrumentation spools; calibration test bench; test pad modifications; test pad piping headers; production and injection wells; well 5-2 modifications; well 8-1 down-hole pump; well 6-1 down-hole pump; and well 8-1 booster pump. (JGB)

  16. Monitored retrievable storage facility site screening and evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1985-05-01

    The Nuclear Waste Policy Act of 1982 directs the Department of Energy to complete a detailed study of the need for and feasibility of, and to submit to the Congress a proposal for, the construction of one or more monitored retrievable storage facilities for high level radioactive waste and spent nuclear fuel.'' The Act directs that the proposal includes site specific designs. Further, the proposal is to include, for the first such facility, at least three alternative sites and at least five alternative combinations of such proposed sites and facility designs{hor ellipsis}'' as well as a recommendation of the combination among the alternatives that the Secretary deems preferable.'' An MRS Site Screening Task Force has been formed to help identify and evaluate potential MRS facility sites within a preferred region and with the application of a siting process and criteria developed by the DOE. The activities of the Task Force presented in this report include: site evaluations (sections 10 through 12) where the rationale for the site evaluations are presented, along with each evaluation and findings of the Task Force. This in Volume 2 of a three volume document.

  17. Monitored Retrievable Storage facility site screening and evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1985-05-01

    The Nuclear Waste Policy Act of 1982 directs the Department of Energy to complete a detailed study of the need for and feasibility of, and to submit to the Congress a proposal for, the construction of one or more monitored retrievable storage facilities for high level radioactive waste and spent nuclear fuel.'' The Act directs that the proposal includes site specific designs. Further, the proposal is to include, for the first such facility, at least three alternative sites and at least five alternative combinations of such proposed sites and facility designs {hor ellipsis}'' as well as a recommendation of the combination among the alternatives that the Secretary deems preferable.'' An MRS Site Screening Task Force has been formed to help identify and evaluate potential MRS facility sites within a preferred region and with the application of a siting process and criteria developed by the DOE. The activities of the Task Force presented in this report, all site evaluations (sections 13 through 16) where the rationale for the site evaluations are presented, along with each evaluation and findings of the Task Force. This is Volume 3 of a three volume document. References are also included in this volume.

  18. Cryocooled Facilities for Superconducting Coils Testing in Gaseous Helium

    Science.gov (United States)

    Naumov, A. V.; Keilin, V. E.; Kovalev, I. A.; Surin, M. I.; Shcherbakov, V. I.; Shevchenko, S. A.; Ilin, A. A.

    Two superconducting coil test facilities equipped by Sumitomo SRDK-415D cryocoolers were developed, manufactured and tested. The motivation for their constructing was to make cheaper the testing (and especially training of LTS magnets) by liquid helium (LHe) saving. It is well known that the helium price increases rapidly and this tendency most probably will continue for a long time, as the demand of helium grows faster than its production. The utilization of heat-exchange gas considerably reduces many problems, that arise in the design of completely dry LTS magnets. The goal was to decrease or even completely avoid the consumption of rather expensive liquid helium for testing the laboratory size Nb-Ti and Nb3Sn coils including their training process. Several superconducting magnets were tested by using these facilities. For example, the first facility was successfully used for testing of 13 T, 60 kg coil cooled by cryocooler in helium gas (several torr pressure) heat exchange atmosphere. The precooling time was about 45 hours. The quench current (240 A at 4.2 K) was equal to that reached in the pool boiling LHe cryostat. The second facility with 420 mm wide access bore can be used for testing of corresponding size superconducting coils with very modest consumption of liquid helium with its level well below the lower flange of the coil. Each test facility is equipped by 2 pairs of HTS current leads. Design and operational experience of one of them is described.

  19. A geographical assessment of vegetation carbon stocks and greenhouse gas emissions on potential microalgae-based biofuel facilities in the United States.

    Science.gov (United States)

    Quiroz Arita, Carlos; Yilmaz, Özge; Barlak, Semin; Catton, Kimberly B; Quinn, Jason C; Bradley, Thomas H

    2016-12-01

    The microalgae biofuels life cycle assessments (LCA) present in the literature have excluded the effects of direct land use change (DLUC) from facility construction under the assumption that DLUC effects are negligible. This study seeks to model the greenhouse gas (GHG) emissions of microalgae biofuels including DLUC by quantifying the CO2 equivalence of carbon released to the atmosphere through the construction of microalgae facilities. The locations and types of biomass and Soil Organic Carbon that are disturbed through microalgae cultivation facility construction are quantified using geographical models of microalgae productivity potential including consideration of land availability. The results of this study demonstrate that previous LCA of microalgae to biofuel processes have overestimated GHG benefits of microalgae-based biofuels production by failing to include the effect of DLUC. Previous estimations of microalgae biofuel production potential have correspondingly overestimated the volume of biofuels that can be produced in compliance with U.S. environmental goals. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Test facilities for VINCI®

    Science.gov (United States)

    Greuel, Dirk; Schäfer, Klaus; Schlechtriem, Stefan

    2013-09-01

    With the replacement of the current upper-stage ESC-A of the Ariane 5 launcher by an enhanced cryogenic upper-stage, ESA's Ariane 5 Midterm Evolution (A5-ME) program aims to raise the launcher's payload capacity in geostationary transfer orbit from 10 to 12 tons, an increase of 20 %. Increasing the in-orbit delivery capability of the A5-ME launcher requires a versatile, high-performance, evolved cryogenic upper-stage engine suitable for delivering multiple payloads to all kinds of orbits, ranging from low earth orbit to geostationary transfer orbit with increased perigee. In order to meet these requirements the re-ignitable liquid oxygen/liquid hydrogen expander cycle engine VINCI® currently under development is designated to power the future upper stage, featuring a design performance of 180 kN of thrust and 464 s of specific impulse. Since 2010 development tests for the VINCI® engine have been conducted at the test benches P3.2 and P4.1 at DLR test site in Lampoldshausen under the ESA A5-ME program. For the VINCI® combustion chamber development the P3.2 test facility is used, which is the only European thrust chamber test facility. Originally erected for the development of the thrust chamber of the Vulcain engine, in 2003 the test facility was modified that today it is able to simulate vacuum conditions for the ignition and startup of the VINCI® combustion chamber. To maintain the test operations under vacuum conditions over an entire mission life of the VINCI® engine, including re-ignition following long and short coasting phases, between 2000 and 2005 the test facility P4.1 was completely rebuilt into a new high-altitude simulation facility. During the past two P4.1 test campaigns in 2010 and 2011 a series of important milestones were reached in the development of the VINCI® engine. In preparation for future activities within the frame of ESA's A5-ME program DLR has already started the engineering of a stage test facility for the prospective upper stage

  1. The Evolution of Modular Construction.

    Science.gov (United States)

    American School & University, 1993

    1993-01-01

    Explores how the myths of modular construction for schools began; also discusses the advances made in steel and modular construction. The major advantages of using permanent modular construction for schools are highlighted, including its rapid construction, use of standard building materials, financial flexibility, and durability. (GR)

  2. Test Facility for Volumetric Absorber

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, M.; Dibowski, G.; Pfander, M.; Sack, J. P.; Schwarzbozl, P.; Ulmer, S.

    2006-07-01

    Long-time testing of volumetric absorber modules is an inevitable measure to gain the experience and reliability required for the commercialization of the open volumetric receiver technology. While solar tower test facilities are necessary for performance measurements of complete volumetric receivers, the long-term stability of individual components can be tested in less expensive test setups. For the qualification of the aging effects of operating cycles on single elements of new absorber materials and designs, a test facility was developed and constructed in the framework of the KOSMOSOL project. In order to provide the concentrated solar radiation level, the absorber test facility is integrated into a parabolic dish system at the Plataforma Solar de Almeria (PSA) in Spain. Several new designs of ceramic absorbers were developed and tested during the last months. (Author)

  3. Prisons and Correctional Facilities, The featured data collection is the USGS-LAGIC Coastal Parishes Structures Project. This ongoing project was started in 2009 with the intent to map critical infrastructure in the Coastal Zone. The initial four parishes included Lafourche, Plaquemine, St. , Published in 2011, 1:24000 (1in=2000ft) scale, Louisiana Geographic Information Center.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Prisons and Correctional Facilities dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Orthoimagery information as of 2011. It...

  4. North Slope, Alaska ESI: FACILITY (Facility Points)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data for oil field facilities for the North Slope of Alaska. Vector points in this data set represent oil field facility locations. This data...

  5. Analytic device including nanostructures

    KAUST Repository

    Di Fabrizio, Enzo M.

    2015-07-02

    A device for detecting an analyte in a sample comprising: an array including a plurality of pixels, each pixel including a nanochain comprising: a first nanostructure, a second nanostructure, and a third nanostructure, wherein size of the first nanostructure is larger than that of the second nanostructure, and size of the second nanostructure is larger than that of the third nanostructure, and wherein the first nanostructure, the second nanostructure, and the third nanostructure are positioned on a substrate such that when the nanochain is excited by an energy, an optical field between the second nanostructure and the third nanostructure is stronger than an optical field between the first nanostructure and the second nanostructure, wherein the array is configured to receive a sample; and a detector arranged to collect spectral data from a plurality of pixels of the array.

  6. Savannah River Site Surplus Facilities Available for Reuse

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, R.M.; Owens, M.B.; Lentz, D.W.

    1995-09-14

    The purpose of this document is to provide a current, centralized list of Savannah River Site facilities, which are surplus and available for reuse. These surplus facilities may be made available for other DOE site missions, commercial economic development reuse, or other governmental reuse. SRS procedures also require that before new construction can be approved, available surplus facilities are screened for possible reuse in lieu of the proposed new construction.

  7. 75 FR 34441 - Office of Safe and Drug-Free Schools; Overview Information; Educational Facilities Clearinghouse...

    Science.gov (United States)

    2010-06-17

    ... facility planning, design, financing, construction, improvement, operation, and maintenance. This priority... (Clearinghouse) will provide technical assistance and training on the planning, design, financing, construction... latest research regarding the planning, design, financing, construction, improvement, operations, and...

  8. Hot gas cleanup test facility for gasification and pressurized combustion project. Quarterly report, October--December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the original Transport Reactor gas source and Hot Gas Cleanup Units: Carbonizer/pressurized circulating fluidized bed gas source; hot gas cleanup units to mate to all gas streams; combustion gas turbine; and fuel cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF). The major emphasis during this reporting period was continuing the detailed design of the facility towards completion and integrating the balance-of-plant processes and particulate control devices (PCDs) into the structural and process designs. Substantial progress in construction activities was achieved during this quarter.

  9. Design for environment for the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cantwell, E.; Gobor, K.; Celeste, J.; Cerruti, S.

    1998-05-01

    The National Ignition Facility (NIF) will be a U.S. Department of Energy (DOE) national center for inertial confinement fusion (ICF) and other research into the physics of high temperatures and high densities, and a vital element of the DOE`s nuclear weapons Stockpile Stewardship and Management Program. It will be used by scientists from a numerous different institutions and disciplines to support research advancements in national security, energy, basic science, and economic development. Multiple powerful laser beams will `ignite` small fusion targets, helping liberate more energy than is required to initiate the fusion reactions. This paper discusses the Design for Environment process for NIF, some of the subsequent activities resulting from the initial study, and a few of the lessons learned from this process. Subsequent activities include the development of a Pollution Prevention and Waste Minimization Plan (P2/WMin) for the facility, which includes Pollution Prevention Opportunity Assessments (PPOAS) on predicted waste streams from NIF, development of construction phase recycling plans, analysis of some of the specialized materials of construction to minimize future demolition and decommissioning (D&D) costs and development of cost assessments for more benign cleaning procedures that meet the stringent cleaning specifications for this facility.

  10. Fracturing fluid characterization facility (FFCF)

    Energy Technology Data Exchange (ETDEWEB)

    Evans, R.D.; Roegiers, J.C.; Fagan, J.

    1993-12-31

    The Fracturing Fluid Characterization Facility project has as its main focus the design, fabrication, and construction of a high pressure simulator (HPS) and a low pressure simulator (LPS) to be used to experimentally investigate the rheological properties and transport characteristics of proppant laden fracturing fluids. A discussion of each apparatus is provided as well as the auxiliary equipment, and data acquisition and control systems associated with the simulators.

  11. Thermal energy storage test facility

    Science.gov (United States)

    Ternes, M. P.

    1981-03-01

    Two loops making up the facility, using either air or liquid as the thermal transport fluid, are described. These loops will be capable of cycling residential-size thermal energy storage units through conditions simulating solar or off-peak electricity applications to evaluate the unit's performance. Construction of the liquid cycling loop was completed, and testing of thermal stratification techniques for hot and cold water is reported.

  12. 10 CFR 170.21 - Schedule of fees for production and utilization facilities, review of standard referenced design...

    Science.gov (United States)

    2010-01-01

    ... of fees Fees 1,2 A. Nuclear Power Reactors Application for Construction Permit Full cost. Early Site... (including reactors and other facilities) and exports of components requiring Commission and Executive Branch... exemption request $16,700 2. Application for export of reactor and other components requiring...

  13. Development of cloud-operating platform for detention facility design

    Science.gov (United States)

    Tun Lee, Kwan; Hung, Meng-Chiu; Tseng, Wei-Fan; Chan, Yi-Ping

    2017-04-01

    In the past 20 years, the population of Taiwan has accumulated in urban areas. The land development has changed the hydrological environment and resulted in the increase of surface runoff and shortened the time to peak discharge. The change of runoff characteristics increases the flood risk and reduces resilient ability of the city during flood. Considering that engineering measures may not be easy to implement in populated cities, detention facilities set on building basements have been proposed to compromise the increase of surface runoff resulting from development activities. In this study, a web-based operational platform has been developed to integrate the GIS technologies, hydrological analyses, as well as relevant regulations for the design of detention facilities. The design procedure embedded in the system includes a prior selection of type and size of the detention facility, integrated hydrological analysis for the developing site, and inspection of relevant regulations. After login the platform, designers can access the system database to retrieve road maps, land use coverages, and storm sewer information. Once the type, size, inlet, and outlet of the detention facility are assigned, the system can acquire the rainfall intensity-duration-frequency information from adjacent rain gauges to perform hydrological analyses for the developing site. The increase of the runoff volume due to the development and the reduction of the outflow peak through the construction of the detention facility can be estimated. The outflow peak at the target site is then checked with relevant regulations to confirm the suitability of the detention facility design. The proposed web-based platform can provide a concise layout of the detention facility and the drainageway of the developing site on a graphical interface. The design information can also be delivered directly through a web link to authorities for inspecting to simplify the complex administrative procedures.

  14. Jupiter Laser Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Jupiter Laser Facility is an institutional user facility in the Physical and Life Sciences Directorate at LLNL. The facility is designed to provide a high degree...

  15. Basic Research Firing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Basic Research Firing Facility is an indoor ballistic test facility that has recently transitioned from a customer-based facility to a dedicated basic research...

  16. Lead Coolant Test Facility Systems Design, Thermal Hydraulic Analysis and Cost Estimate

    Energy Technology Data Exchange (ETDEWEB)

    Soli Khericha; Edwin Harvego; John Svoboda; Ryan Dalling

    2012-01-01

    The Idaho National Laboratory prepared a preliminary technical and functional requirements (T&FR), thermal hydraulic design and cost estimate for a lead coolant test facility. The purpose of this small scale facility is to simulate lead coolant fast reactor (LFR) coolant flow in an open lattice geometry core using seven electrical rods and liquid lead or lead-bismuth eutectic coolant. Based on review of current world lead or lead-bismuth test facilities and research needs listed in the Generation IV Roadmap, five broad areas of requirements were identified as listed: (1) Develop and Demonstrate Feasibility of Submerged Heat Exchanger; (2) Develop and Demonstrate Open-lattice Flow in Electrically Heated Core; (3) Develop and Demonstrate Chemistry Control; (4) Demonstrate Safe Operation; and (5) Provision for Future Testing. This paper discusses the preliminary design of systems, thermal hydraulic analysis, and simplified cost estimate. The facility thermal hydraulic design is based on the maximum simulated core power using seven electrical heater rods of 420 kW; average linear heat generation rate of 300 W/cm. The core inlet temperature for liquid lead or Pb/Bi eutectic is 4200 C. The design includes approximately seventy-five data measurements such as pressure, temperature, and flow rates. The preliminary estimated cost of construction of the facility is $3.7M (in 2006 $). It is also estimated that the facility will require two years to be constructed and ready for operation.

  17. Lead coolant test facility systems design, thermal hydraulic analysis and cost estimate

    Energy Technology Data Exchange (ETDEWEB)

    Khericha, Soli, E-mail: slk2@inel.gov [Battelle Energy Alliance, LLC, Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Harvego, Edwin; Svoboda, John; Evans, Robert [Battelle Energy Alliance, LLC, Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Dalling, Ryan [ExxonMobil Gas and Power Marketing, Houston, TX 77069 (United States)

    2012-01-15

    The Idaho National Laboratory prepared a preliminary technical and functional requirements (T and FR), thermal hydraulic design and cost estimate for a lead coolant test facility. The purpose of this small scale facility is to simulate lead coolant fast reactor (LFR) coolant flow in an open lattice geometry core using seven electrical rods and liquid lead or lead-bismuth eutectic coolant. Based on review of current world lead or lead-bismuth test facilities and research needs listed in the Generation IV Roadmap, five broad areas of requirements were identified as listed below: Bullet Develop and demonstrate feasibility of submerged heat exchanger. Bullet Develop and demonstrate open-lattice flow in electrically heated core. Bullet Develop and demonstrate chemistry control. Bullet Demonstrate safe operation. Bullet Provision for future testing. This paper discusses the preliminary design of systems, thermal hydraulic analysis, and simplified cost estimated. The facility thermal hydraulic design is based on the maximum simulated core power using seven electrical heater rods of 420 kW; average linear heat generation rate of 300 W/cm. The core inlet temperature for liquid lead or Pb/Bi eutectic is 4200 Degree-Sign C. The design includes approximately seventy-five data measurements such as pressure, temperature, and flow rates. The preliminary estimated cost of construction of the facility is $3.7M (in 2006 $). It is also estimated that the facility will require two years to be constructed and ready for operation.

  18. Turbine and Structural Seals Team Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — Seals Team Facilities conceive, develop, and test advanced turbine seal concepts to increase efficiency and durability of turbine engines. Current projects include...

  19. Turbine and Structural Seals Team Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — Seals Team Facilities conceive, develop, and test advanced turbine seal concepts to increase efficiency and durability of turbine engines. Current projects include...

  20. Improving the Safeguardability of Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    T. Bjornard; R. Bari; D. Hebditch; P. Peterson; M. Schanfein

    2009-07-01

    The application of a Safeguards-by-Design (SBD) process for new nuclear facilities has the potential to reduce security risks and proliferation hazards while improving the synergy of major design features and raising operational efficiency, in a world where significant expansion of nuclear energy use may occur. Correspondingly, the U.S. DOE’s Next Generation Safeguards Initiative (NGSI) includes objectives to contribute to international efforts to develop SBD, and to apply SBD in the development of new U.S. nuclear infrastructure. Here, SBD is defined as a structured approach to ensure the timely, efficient and cost effective integration of international safeguards and other nonproliferation barriers with national material control and accountability, physical protection, and safety objectives into the overall design process for a nuclear facility, from initial planning through design, construction and operation. The SBD process, in its simplest form, may be applied usefully today within most national regulatory environments. Development of a mature approach to implementing SBD requires work in the areas of requirements definition, design processes, technology and methodology, and institutionalization. The U.S. efforts described in this paper are supportive of SBD work for international safeguards that has recently been initiated by the IAEA with the participation of many stakeholders including member States, the IAEA, nuclear technology suppliers, nuclear utilities, and the broader international nonproliferation community.

  1. Construction and execution of experiments at the multi-purpose thermal hydraulic test facility TOPFLOW for generic investigations of two-phase flows and the development and validation of CFD codes - Final report

    OpenAIRE

    2010-01-01

    The works aimed at the further development and validation of models for CFD codes. For this reason, the new thermal-hydraulic test facility TOPFLOW was erected and equipped with wire-mesh sensors with high spatial and time resolution. Vertical test sections with nominal diameters of DN50 and DN200 operating with air-water as well as steam-water two-phase flows provided results on the evaluation of flow patterns, on the be¬haviour of the interfacial area as well as on interfacial momentum and ...

  2. Facility Registry Service (FRS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Facility Registry Service (FRS) provides an integrated source of comprehensive (air, water, and waste) environmental information about facilities across EPA,...

  3. Licensed Healthcare Facilities

    Data.gov (United States)

    California Department of Resources — The Licensed Healthcare Facilities point layer represents the locations of all healthcare facilities licensed by the State of California, Department of Health...

  4. High Throughput Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Argonne?s high throughput facility provides highly automated and parallel approaches to material and materials chemistry development. The facility allows scientists...

  5. Aperture area measurement facility

    Data.gov (United States)

    Federal Laboratory Consortium — NIST has established an absolute aperture area measurement facility for circular and near-circular apertures use in radiometric instruments. The facility consists of...

  6. Environmental Toxicology Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Fully-equipped facilities for environmental toxicology research The Environmental Toxicology Research Facility (ETRF) located in Vicksburg, MS provides over 8,200 ft...

  7. Licensed Healthcare Facilities

    Data.gov (United States)

    California Department of Resources — The Licensed Healthcare Facilities point layer represents the locations of all healthcare facilities licensed by the State of California, Department of Health...

  8. Guide to user facilities at the Lawrence Berkeley Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1984-04-01

    Lawrence Berkeley Laboratories' user facilities are described. Specific facilities include: the National Center for Electron Microscopy; the Bevalac; the SuperHILAC; the Neutral Beam Engineering Test Facility; the National Tritium Labeling Facility; the 88 inch Cyclotron; the Heavy Charged-Particle Treatment Facility; the 2.5 MeV Van de Graaff; the Sky Simulator; the Center for Computational Seismology; and the Low Background Counting Facility. (GHT)

  9. Survey of solar thermal test facilities

    Energy Technology Data Exchange (ETDEWEB)

    Masterson, K.

    1979-08-01

    The facilities that are presently available for testing solar thermal energy collection and conversion systems are briefly described. Facilities that are known to meet ASHRAE standard 93-77 for testing flat-plate collectors are listed. The DOE programs and test needs for distributed concentrating collectors are identified. Existing and planned facilities that meet these needs are described and continued support for most of them is recommended. The needs and facilities that are suitable for testing components of central receiver systems, several of which are located overseas, are identified. The central contact point for obtaining additional details and test procedures for these facilities is the Solar Thermal Test Facilities Users' Association in Albuquerque, N.M. The appendices contain data sheets and tables which give additional details on the technical capabilities of each facility. Also included is the 1975 Aerospace Corporation report on test facilities that is frequently referenced in the present work.

  10. Ship construction

    National Research Council Canada - National Science Library

    Eyres, D.J; Bruce, G.J

    2012-01-01

    .... "Acting as both a professional reference on current approaches in shipyard practice and a comprehensive introduction for students in any marine discipline, Ship Construction covers the complete...

  11. Constructive Fun.

    Science.gov (United States)

    Simanek, Donald E.

    1994-01-01

    Compares and reviews currently available brands of steel construction sets that are useful to physics teachers for building demonstrations, prototypes of mechanisms, robotics, and remote control devices. (ZWH)

  12. Implementing Temporary Facilities for Organic Chemistry Laboratory

    Science.gov (United States)

    Amburgey-Peters, Judith C.

    2002-05-01

    Our classroom and laboratory facilities were recently remodeled, which required that we vacate our chemistry building temporarily. Construction was completed within 17 months with minimal interruption of class schedules, although some rather creative laboratory arrangements were necessary. My primary objective was to maintain our organic chemistry curriculum. Keys to success included support from the administration and other science faculty, and extensive planning. During the renovations, our organic chemistry laboratory was held in a 23 x 30-ft room normally used for a general physics laboratory. The major considerations for setting up a functional organic laboratory under these conditions were proper fume control (ductless fume enclosures), electrical needs, water supply, and safety issues. As described in this report, we were able to conduct a normal laboratory curriculum successfully.

  13. A New Neutron Interferometry Facility at NCNR

    Science.gov (United States)

    Shahi, Chandra; Wietfeldt, Fred; Huber, Michael; Pushin, Dmitry; Arif, Muhammad

    2013-10-01

    A neutron interferometer splits an incoming neutron beam into two coherent partial beams, which travel on different paths and then recombine to form an interference pattern. This pattern is used to precisely determine the phase shift of a sample in one of the paths, thus the neutron interaction potential in the sample can be measured with high precision. A new neutron interferometry setup (NIOFa) has been constructed at the NIST Center for Neutron Research (NCNR). This new facility is mainly focused on spin based interferometry, which will expand its applications in both quantum computation and material research. New spin-control mechanisms are being tested; including thin-film spin flippers and efficient polarizing double cavity super mirrors. Doubling the neutron's degrees of freedom inside the interferometer promises exciting new quantum mechanical experiments and research capabilities. This work is supported by the National Science Foundation.

  14. SERI Desiccant Cooling Test Facility. Status report. Preliminary data on the performance of a rotary parallel-passage silica-gel dehumidifier

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, K.J.

    1986-04-01

    This report describes the SERI Desiccant Cooling Test Facility. The facility can test bench-scale rotary dehumidifiers over a wide range of controlled conditions. We constructed and installed in the test loop a prototype parallel-passage rotary dehumidifier that has spirally wound polyester tape coated with silica gel. The initial tests gave satisfactory results indicating that approximately 90% of the silica gel was active and the overall Lewis number of the wheel was near unity. The facility has several minor difficulties including an inability to control humidity satisfactorily and nonuniform and highly turbulent inlet velocities. To completely validate the facility requires a range of dehumidifier designs. Several choices are available including constructing a second parallel-passage dehumidifier with the passage spacing more uniform.

  15. The Integral Test Facility Karlstein

    Directory of Open Access Journals (Sweden)

    Stephan Leyer

    2012-01-01

    Full Text Available The Integral Test Facility Karlstein (INKA test facility was designed and erected to test the performance of the passive safety systems of KERENA, the new AREVA Boiling Water Reactor design. The experimental program included single component/system tests of the Emergency Condenser, the Containment Cooling Condenser and the Passive Core Flooding System. Integral system tests, including also the Passive Pressure Pulse Transmitter, will be performed to simulate transients and Loss of Coolant Accident scenarios at the test facility. The INKA test facility represents the KERENA Containment with a volume scaling of 1 : 24. Component heights and levels are in full scale. The reactor pressure vessel is simulated by the accumulator vessel of the large valve test facility of Karlstein—a vessel with a design pressure of 11 MPa and a storage capacity of 125 m3. The vessel is fed by a benson boiler with a maximum power supply of 22 MW. The INKA multi compartment pressure suppression Containment meets the requirements of modern and existing BWR designs. As a result of the large power supply at the facility, INKA is capable of simulating various accident scenarios, including a full train of passive systems, starting with the initiating event—for example pipe rupture.

  16. On Construction Situation of College Football Facilities and Countermeasure Analysis%关于高校足球场地设施的建设现状和对策分析

    Institute of Scientific and Technical Information of China (English)

    吴灿; 张碧昊

    2016-01-01

    近些年来,各高校更加注重对学生的体育训练,而足球项目也在近些年来成为高校体育课程开展的选修项目之一。本文针对高校足球场地设施不完善的原因进行分析,提出加强政府管理、强化学校领导意识以及增加社会资源利用率等方法,以改善当前高校足球场地设施不完善的现状。%In recent years , universities pay more attention to students'physical training and football has also become one of university sports curriculum elective programs .The paper analyzes the reason of poor football fields and facilities in universities and proposes ways such as strengthening government management , enhancing university leaders ’ awareness and increasing utilization of social resources to promote the current imperfect situation of football fields and facilities .

  17. Construction Safety Forecast for ITER

    Energy Technology Data Exchange (ETDEWEB)

    cadwallader, lee charles

    2006-11-01

    The International Thermonuclear Experimental Reactor (ITER) project is poised to begin its construction activity. This paper gives an estimate of construction safety as if the experiment was being built in the United States. This estimate of construction injuries and potential fatalities serves as a useful forecast of what can be expected for construction of such a major facility in any country. These data should be considered by the ITER International Team as it plans for safety during the construction phase. Based on average U.S. construction rates, ITER may expect a lost workday case rate of < 4.0 and a fatality count of 0.5 to 0.9 persons per year.

  18. Transformation of Malaysian Construction Industry with Building Information Modelling (BIM

    Directory of Open Access Journals (Sweden)

    Latiffi Aryani Ahmad

    2016-01-01

    Full Text Available Building Information Modelling (BIM is a revolution of technology and a process that transformed the way building is planned, designed, analysed, constructed and managed. The revolution of technology and process could increase the quality of construction projects. The knowledge of BIM has been expanding in many countries including Malaysia. Since its inception, the use of BIM has broadened up widely with different purposes. The aims of this paper is to investigate the BIM implementation and uses in Malaysian construction projects. The methodologies adopted for structuring this paper are by using literature review and semi-structured interview with construction players that have experienced and being involved in projects using BIM. The purpose of literature review is to illustrate on the pervious research on the subject matter. Meanwhile, the purpose of interviews is to explore the involvement of construction players, years of experience in projects using BIM and BIM uses in construction projects. The findings revealed that BIM has been implemented in Malaysia since 2007 by various construction players, which are client, architect, C&S engineer, M&E engineer, QS, contractor, facilities manager and BIM consultant. The findings also revealed that BIM is used for project’ visualisation, improving project design, detecting design clashes, quantity take off and operation and maintenance. Further work will be focused on the current practices of construction players in projects using BIM.

  19. Storm Water General Permit 2 for Construction

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — General permit #2 for storm water discharges associated with industrial activity for Construction Activities in Iowa for the National Pollutant Discharge Elimination...

  20. Environmental Assessment for Proposed Construction and Lease of New Facilities for the Department of Energy, National Nuclear Security Administration, Office of Secure Transportation (Albuquerque Transportation and Technology Center), Albuquerque, New Mexico

    Science.gov (United States)

    2006-07-01

    covering the sites and surrounding area is grasses. The surrounding grasslands are influenced primarily by the Chihuahuan Desert and the Great Basin biotic ...fulfilling the proposed action. The assessment was conducted in accordance with the American Society of Testing and Materials (ASTM) Standard Practice for...Additional access options would be provided by the developer via the planned Mesa Del Sol Interchange as the development matures. Construction of the