WorldWideScience

Sample records for fabrication estudios encaminados

  1. Zircon Carburation Studies as Intermediate Stage in the Zirconium Fabrication; Estudios encaminados a la carburacion del circon como etapa intermedia en la obtencion de circonio

    Almagro Huertas, V; Saenz de Tejada Gonzalez, L.; Lopez Rodriguez, M

    1963-07-01

    Zirconium carbide and carbonitride mixtures were obtained by Kroll's method.Reaction products have been identified by micrography and X-ray diffraction analysis. The optimum graphite content in the initial charge for the carburation reaction has been studied. zirconium, silicon and carbon content in the final product has been controlled as a function of current in the furnace and reaction time.Further chlorination of the final product was performed successfully. (Author) 16 refs.

  2. Zircon Carburation Studies as Intermediate Stage in the Zirconium Fabrication; Estudios encaminados a la carburacion del circon como etapa intermedia en la obtencion de circonio

    Almagro Huertas, V.; Saenz de Tejada Gonzalez, L.; Lopez Rodriguez, M.

    1963-07-01

    Zirconium carbide and carbonitride mixtures were obtained by Kroll's method.Reaction products have been identified by micrography and X-ray diffraction analysis. The optimum graphite content in the initial charge for the carburation reaction has been studied. zirconium, silicon and carbon content in the final product has been controlled as a function of current in the furnace and reaction time.Further chlorination of the final product was performed successfully. (Author) 16 refs.

  3. El “Estudio del Rechazo”: mujeres a las que no se les permite abortar = Turnaway Study

    Foster, Diana Greene; Barar, Rana; Weitz, Tracy; Heather, Gould; Weisz, Elissete

    2013-01-01

    El Turnaway Study o Estudio del Rechazo, es un estudio longitudinal prospectivo sobre mujeres a quienes se realiza un aborto y mujeres a quienes se les niega debido a que se presentan a recibir tratamiento después del límite de semanas de gestación establecido por la clínica. El estudio está encaminado a describir la salud mental y física y los resultados socioeconómicos de la realización de un aborto en comparación con llevar a término un embarazo indeseado.

  4. MEXCODE* CASO DE ESTUDIO

    Gabriel Arturo García Gómez

    2000-01-01

    Full Text Available El caso plantea la reactivación de un proyecto que se presentó en el año 1995 como alternativa para el desarrollo del centro del Valle y mejora de la eficiencia en el manejo del comercio exterior de la Cuenca Pacífica. El proyecto se revivió a raíz de la necesidad de la compañía patrocinadora de mejorar sus flujos de caja proyectados y la reciente autorización para su funcionamiento. El proyecto es el popularmente denominado “Puerto Seco” de la ciudad de Guadalajara de Buga, internamente nombrado Mexcode. Los estudios iniciales estaban encaminados a que el proyecto fuera manejado por el municipio de Buga, sin embargo, posteriormente se vio la necesidad de buscar que pasara a manos de la empresa privada. El municipio, después de analizar las propuestas de varios inversionistas de la región en las cuales se evaluaba la ubicación dentro de la zona de los predios de sus empresas, su área, proximidad a la línea férrea y a la doble calzada Buga-Tuluá (sitio de paso del 80% de la carga de importación y exportación por Buenaventura y evaluar aspectos relativos a su trayectoria empresarial y compromiso con el desarrollo de la región, decidió otorgarle el proyecto al Grupo Empresarial Agri-Supplies S.A.

  5. EL ESTUDIO DE LA SEXUALIDAD EN JÓVENES ESPAÑOLES

    Maria Lameiras Fernandez

    1998-01-01

    El objetivo de este trabajo es el de llevar a cabo una revisión de los estudios encaminados a evaluar la actividad sexual de los jóvenes españoles, haciendo especial referencia a la población universitaria. Este objetivo se articula a partir de la exposición de las principales variables que han centrado el interés de las investigaciones: 1) conocimientos, tanto en relación a la sexualidad en general como a la infección HIV/aids; 2) actitudes, tanto hacia la sexualidad como hacia la infección ...

  6. Estudio EPIFARM

    Martín Morales A

    2010-12-01

    Full Text Available INTRODUCCIÓN Los farmacéuticos comunitarios pueden ser un importante primer punto de contacto con los pacientes con disfunción eréctil (DE, pero hasta la fecha no hay ningún estudio sobre las características de los hombres que acuden a un farmacéutico solicitando consejo o tratamiento para la DE. OBJETIVO Caracterizar los perfiles de los hombres que solicitan tratamiento para la DE en la farmacia, con o sin receta de inhibidores de la fosfodiesterasa tipo 5 (iPDE5. MÉTODOS Entre septiembre y noviembre de 2008 se realizó un estudio observacional, transversal y multicéntrico en farmacias comunitarias de España. De aquellos hombres que solicitaban consejo o tratamiento para la DE, cada investigador reclutó un paciente que tenía receta médica de iPDE5 y otro que acudía sin receta médica. Los farmacéuticos del estudio completaron un cuestionario de datos demográficos, clínicos y conductuales del paciente, incluido el Cuestionario de salud sexual para varones (Sexual Health Inventory for Men. VARIABLES PRINCIPALES Características demográficas y respuestas a los cuestionarios. RESULTADOS 574 farmacéuticos seleccionaron a 1.147 pacientes, de los cuales 1.113 fueron incluidos en el análisis. No se observaron diferencias estadísticas entre los grupos en cuanto al peso, la hipertensión, la diabetes mellitus, la hipercolesterolemia, la dislipidemia, la depresión o el estrés. Tampoco se observaron diferencias estadísticas respecto a la gravedad de la DE (p = 0,7892 ni a la proporción de hombres sin DE en cada grupo (p = 0,5755. En ambos grupos, los pacientes habían presentado síntomas de DE durante una media de veintiséis meses antes de la primera consulta a un profesional sanitario. Para el 60,2% de los pacientes incluidos en el grupo sin receta, la visita a la farmacia fue la primera ocasión en la que habían hablado de su DE con un profesional sanitario, y el 50% de aquellos que habían hablado previamente de la DE lo hab

  7. Las javieradas como caso de estudio

    Mª Cruz Porcal Gonzalo

    2006-01-01

    Full Text Available A pesar de su todavía modesta participación en la economía y en el empleo regional, el turismo en Navarra ha mostrado durante los últimos años un significativo dinamismo tal y como, por ejemplo, lo testimonia el incremento del número de visitantes y de las empresas turísticas. Favorecido por una serie de circunstancias de índole variada, este desarrollo turístico se sustenta en una gran diversidad geográfica y cultural patente en los paisajes, el arte, las fiestas, la gastronomía, etc. Pero Navarra es, a su vez, una región que secularmente ha otorgado un gran peso a la tradición y a las creencias religiosas. En este contexto, algunas de las numerosas acciones emprendidas por la administración regional para dinamizar el sector turístico se han encaminado a revalorizar dos importantes legados culturales: el castillo de Javier y el Camino de Santiago. Se aprecia que ambos se hallan estrechamente relacionados con el turismo cultural, el turismo religioso y las peregrinaciones, unos fenómenos que hunden sus raíces en tiempos pasados pero que continúan teniendo en la actualidad una indudable relevancia a escala mundial. La intención primordial del presente trabajo es analizar el turismo de peregrinaciones en Navarra, más concretamente, el que tiene como destino del viaje la cuna de San Francisco Javier. Con dicho afán, se realiza una reflexión conceptual previa y un breve repaso de las fiestas y tradiciones religiosas que forman parte del patrimonio cultural intangible de Navarra, haciendo particular hincapié en las romerías y en el Camino de Santiago. Al hilo de ello, se afronta, a continuación, el estudio de la peregrinación más singular y populosa de Navarra: la Javierada. Su origen, sus principales rasgos, el perfil y las motivaciones de los peregrinos, los caracteres e hitos más importantes del recorrido, las peculiaridades del destino —entendido como lugar sagrado y espacio turístico— constituyen las principales

  8. Study for increasing the stabilization time of a catalytic dye to facilitate the fabrication of membrane electrode assemblies; Estudio para incrementar el tiempo de estabilizacion de una tinta catalitica para facilitar la fabricacion de ensambles membrana-electrodo

    Flores Hernandez, J. Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)] e-mail: jrflores@iie.org.mx; Martinez Vado, F. Isaias [Facultad de Quimica, Universidad Nacional Autonoma de Mexico, Mexico D.F. (Mexico); Cano Castillo, Ulises, Albarran Sanchez, Lorena [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2009-09-15

    An infrastructure project has been underway for hydrogen technology and fuel cells at the Electrical Research Institute (IIE, Spanish acronym). Part of this project is an activity for the fabrication of membrane electrode assemblies (MEA). Currently, a fabrication process is well-established for the MEA using the spray technique. In addition, a catalytic dye base composition has been developed for use in the fabrication of high-quality MEA with a good degree of reproducibility. Nevertheless, the instability of the dye over time prevents continuous fabrication of MEA. This document presents the results obtained, to-date, of research conducted at the IIE aimed at increasing the stability of the catalytic dye by adding a surfactant with different concentrations and increasing the concentration of the Nafion® solution. It was found that the effect of adding the surfactant to the catalytic dye results in a qualitative decrease in the agglomerate sizes, while also decreasing the porosity of the dye once it has dried. In addition, it was found that increasing the amount of Nafion® in the catalytic die increases the porosity. [Spanish] En el Instituto de Investigaciones Electricas (IIE) se ha venido trabajando en un proyecto de infraestructura sobre la tecnologia de hidrogeno y celdas de combustible. Dentro de este proyecto se tiene una actividad orientada a la fabricacion de Ensambles Membrana-Electrodo (MEA's). Actualmente se tiene un proceso de fabricacion bien establecido para la elaboracion de MEA's utilizando la tecnica de rociado, asimismo, se tiene una composicion base de tinta catalitica con la cual se fabrican MEA's de buena calidad y con buen grado de reproducibilidad. Sin embargo, la inestabilidad de la tinta con respecto al tiempo impide tener una fabricacion continua de los MEA's. En este documento se presentan los resultados obtenidos hasta ahora de una investigacion que se realiza en el IIE orientada a incrementar la estabilidad de la

  9. Fabrication Facilities

    Federal Laboratory Consortium — The Fabrication Facilities are a direct result of years of testing support. Through years of experience, the three fabrication facilities (Fort Hood, Fort Lewis, and...

  10. Study of the feasibility of friction STIR welding applied to the fabrication of monolithic fuel elements; Estudio para la aplicacion del proceso de soldadura por friccion-agitacion (FSW) a la fabricacion de elementos combustibles monoliticos

    Cabot, Pedro J; Moglioni, A [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. ENDE; Mirandou, Marcela; Balart, Silvia N [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. de Materiales

    2004-07-01

    The monolithic U-Mo fuel elements consist in a foil of a U-Mo alloy encased in Al. One of the techniques that is being tried to apply in their fabrication is Friction Stir Welding in the 'no contact at the interface' mode. The Laboratory of Welding at the National Atomic Energy Commission (Argentina) has a great experience in the conventional form of this technique so has started working on this new application. This paper describes the experiments performed to obtain the operative parameters. In the first experiments AA6061 T6 (Al) plates and sheets of AISI 316 (SS) were used to obtain the optimal operative parameters of the process. Welds were performed and evaluated for different operative variables such speed, angle and diameter of the tool and tool-interface gap keeping the rotation speed constant. Tensile test, pressure leak-proof test, bending test, non-destructive test and metallography were used to characterize the welds. Finally, SS and U-Mo foils were encased using the parameters selected from the first experiments. The samples prepared with U-Mo alloy will be used as diffusion couples and for the studies of interdiffusion under irradiation. (author)

  11. de estudios observacionales

    Erik von Elm

    2008-01-01

    un documento de explicación y elaboración al que puede accederse libremente en los sitios web de PLoS Medicine, Annals of Internal Medicine y Epidemiology. Esperamos que la declaración STROBE contribuya a mejorar la calidad de la publicación de los estudios observacionales.

  12. Estudio de validez predictiva

    Barquero-Segura, José Antonio

    2003-01-01

    Proyecto de investigación Este documento es un informe ejecutivo de la información obtenida de los estudios sobre la validez predictiva de los parámetros de selección de estudiantes y su relación con el rendimiento académico. En él se presenta una síntesis de información más relevante obtenida en los últimos 17 años.

  13. Digital fabrication

    2012-01-01

    The Winter 2012 (vol. 14 no. 3) issue of the Nexus Network Journal features seven original papers dedicated to the theme “Digital Fabrication”. Digital fabrication is changing architecture in fundamental ways in every phase, from concept to artifact. Projects growing out of research in digital fabrication are dependent on software that is entirely surface-oriented in its underlying mathematics. Decisions made during design, prototyping, fabrication and assembly rely on codes, scripts, parameters, operating systems and software, creating the need for teams with multidisciplinary expertise and different skills, from IT to architecture, design, material engineering, and mathematics, among others The papers grew out of a Lisbon symposium hosted by the ISCTE-Instituto Universitario de Lisboa entitled “Digital Fabrication – A State of the Art”. The issue is completed with four other research papers which address different mathematical instruments applied to architecture, including geometric tracing system...

  14. un estudio comparativo

    Federico Varona

    2007-01-01

    Full Text Available La comunicación efectiva es uno de los mayores retos que tienen hoy las organizaciones y empresas tanto a nivel nacional como internacional (global. Este artículo presenta los resultados de la investigación realizada por un equipo internacional de investigadores interesados en descubrir y comparar las conductas comunicativas o estilos de comunicación de los empleados finlandeses y mexicanos cuando interactúan con sus superiores. Para ello presentamos: primero, un breve marco teórico del estudio; segundo, la metodología; tercero, los resultados del análisis estadístico comparativo entre los empleados de Finlandia y México; cuarto, las conclusiones generales y su explicación cultural; y quinto, las implicaciones teóricas y prácticas de este estudio con respecto a las competencias comunicativas necesarias para la comunicación efectiva entre empleados y superiores tanto en organizaciones nacionales como internacionales (globales.

  15. Dos estudios de casos

    Hernán Guillermo Salazar Morales

    1989-04-01

    Full Text Available RESUMEN A continuación se presenta dos casos de estudio en donde se puede apreciar a la forma  como se establecen  las relaciones en una organización y lo que una DECISION  puede llegar a incidir en el desarrollo de las operaciones de una empresa. Decisiones basadas en la intuición, o en corazonadas, frecuentemente conducen en dirección equivocada, ocasionando pérdidas en tiempo, personal y dinero. El proceso de toma de decisiones deben ser TAREAS ESTRUCTURADAS que se sustenten con hechos. Su ejecución debe hacerse secuencialmente y cumplir con cada uno de sus pasos. El diseño de los  casos está orientado para que  sirvan como material de aplicación en la asignatura de  taller de planeación.

  16. DE AGUA. ESTUDIO PRELIMINAR

    Esther E. Pellizzari

    2015-01-01

    Full Text Available El objetivo del presente estudio fue investigar la resistencia al arsénico en cultivos puros de Pseudomonas aeruginosa , aislada de aguas subterráneas de Presidencia Roque Sáenz Peña, provincia de Chaco y evaluar la posibilidad de su uso para la remoción de este contaminante presente en las aguas subterráneas. Las cepas fueron inmovilizadas en piedra natural y se cu ltivaron en caldo de sales y 1 mgAs/L . Se observó la resistencia al arsénico y la formación de biofilm , logrando la interacción entre la s células, roca y arsénico . L a remoción de arsénico se evaluó durante 3 meses y el porcentaje de eliminación de arsénico al final del experimento fue 60%.

  17. Estudio de la asimetría interhemisférica en la corteza prefrontal dorsolateral de sujetos humanos

    Hernán J. Pimienta J.

    2005-03-01

    Full Text Available Se presentan los resultados de un trabajo de investigación encaminado a establecer las diferencias entre los hemisferios cerebrales de la corteza prefrontal dorsolateral: áreas 46 laeral y 7 medial, de sujetos humanos.

  18. Estudio del CH interestelar

    Olano, C.; Lemarchand, G.; Sanz, A. J.; Bava, J. A.

    El objetivo principal de este proyecto consiste en el estudio de la distribución y abundancia del CH en nubes interestelares a través de la observación de las líneas hiperfinas del CH en 3,3 GHz. El CH es una molécula de amplia distribución en el espacio interestelar y una de las pocas especies que han sido observadas tanto con técnicas de radio como ópticas. Desde el punto de vista tecnológico se ha desarrollado un cabezal de receptor que permitirá la realización de observaciones polarimétricas en la frecuencia de 3,3 GHz, con una temperatura del sistema de 60 K y un ancho de banda de 140 MHz, y que será instalado en el foco primario de la antena parabólica del IAR. El cabezal del receptor es capaz de detectar señales polarizadas, separando las componentes de polarización circular derecha e izquierda. Para tal fin el cabezal consta de dos ramas receptoras que amplificarán la señal y la trasladarán a una frecuencia más baja (frecuencia intermedia), permitiendo de esa forma un mejor transporte de la señal a la sala de control para su posterior procesamiento. El receptor además de tener características polarimétricas, podrá ser usado en el continuo y en la línea, utilizando las ventajas observacionales y de procesamiento de señal que actualmente posee el IAR.

  19. Estenosis traqueal: Estudio preliminar

    Rafael Pinilla González

    2000-12-01

    Full Text Available Se realizó un estudio retrospectivo y descriptivo con la utilización de los expedientes clínicos de 5 pacientes con estenosis traqueal, mayoritariamente como consecuencia de intubación prolongada, y en el que se tuvo en cuenta aspectos relacionados con el diagnóstico, el tratamiento y las complicaciones. Existió un predominio del sexo femenino y edad media de 44,6 años. La intubación prolongada de origen diverso fue la causa de la estenosis en 4 de los 5 pacientes y en 1 fue posterior a la reparación de lesión traqueal yatrógena. La instalación de la estenosis tuvo lugar entre 8 días y 3 meses. La tomografía lineal en 3 pacientes y en 2 la radiografía simple de tráquea anteroposterior y lateral verificaron el diagnóstico. La endoscopia traqueobronquial preoperatoria fue de utilidad en la caracterización de la estenosis. En todos los pacientes se realizó tratamiento quirúrgico al resecar el área estenótica con posterior anastomosis terminoterminal y fijación del cuello en flexión durante 8 días como promedio. Dos pacientes mostraron granulomas en el nivel de la línea de sutura, los cuales fueron tratados por vacuolización con láser. No se reportó mortalidad en la muestra estudiadaA retrospective and descriptive study was conducted by using the medical histories of 5 patients with tracheal stenosis, mostly as a result of prolongued intubation. Aspects connected with the diagnosis, treatment and complications were taken into account. It was observed a predominance of females and an average age of 44.6. Prolongued intubation of different origin was the cause of stenosis in 4 of the 5 patients, whereas in the other it occurred after the reparation of the tracheal and athrogenous lesion. The installation of stenosis took place between 8 days and 3 months. Lineal tomography in 3 patients and anteroposterior and lateral simple X-ray of the trachea in 2 confirmed the diagnosis. Preoperative tracheobronchial endoscopy was

  20. Fabricated Elastin.

    Yeo, Giselle C; Aghaei-Ghareh-Bolagh, Behnaz; Brackenreg, Edwin P; Hiob, Matti A; Lee, Pearl; Weiss, Anthony S

    2015-11-18

    The mechanical stability, elasticity, inherent bioactivity, and self-assembly properties of elastin make it a highly attractive candidate for the fabrication of versatile biomaterials. The ability to engineer specific peptide sequences derived from elastin allows the precise control of these physicochemical and organizational characteristics, and further broadens the diversity of elastin-based applications. Elastin and elastin-like peptides can also be modified or blended with other natural or synthetic moieties, including peptides, proteins, polysaccharides, and polymers, to augment existing capabilities or confer additional architectural and biofunctional features to compositionally pure materials. Elastin and elastin-based composites have been subjected to diverse fabrication processes, including heating, electrospinning, wet spinning, solvent casting, freeze-drying, and cross-linking, for the manufacture of particles, fibers, gels, tubes, sheets and films. The resulting materials can be tailored to possess specific strength, elasticity, morphology, topography, porosity, wettability, surface charge, and bioactivity. This extraordinary tunability of elastin-based constructs enables their use in a range of biomedical and tissue engineering applications such as targeted drug delivery, cell encapsulation, vascular repair, nerve regeneration, wound healing, and dermal, cartilage, bone, and dental replacement. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Ecoturismo, sostenibilidad y apego a la comunidad. Un estudio de caso en áreas rurales en vías de desarrollo

    Francisco Orgaz Agüera

    2015-01-01

    Full Text Available El turismo se ha encaminado hacia prácticas más sostenibles que respetan el medio ambiente y fomenta la conservación de los recursos naturales y culturales, además de mejorar el desarrollo socioeconómico de los residentes. Una de estas prácticas se realiza a través del ecoturismo. Así, el objetivo principal de esta investigación es analizar la percepción de los residentes de comunida-des rurales en zonas en vías de desarrollo hacia el desarrollo sostenible del ecoturismo y su apego a su comunidad rural. También se pretender analizar el conocimiento de los residentes hacia los recursos naturales y culturales de su provincia. El destino geográfico objeto de investigación ha sido República Dominicana, en concreto las comunidades rurales de Puerto Plata, donde los residentes se benefician de un turismo alternativo al dominante de sol y playa. Para alcanzar los objetivos se ha realizado una encuesta. Entre los principales resultados de este estudio se puede observar que existe una elevada percepción de los residentes hacia el desarrollo sostenible del ecoturismo, que los residentes muestran un apego elevado a su comunidad rural, y que en gran parte de ellos hay un desconocimiento sobre algunos de los recursos, lo que puede generar debi-lidades en el desarrollo del ecoturismo en la zona.

  2. Estudios Experimentales 2 Parte: Estudios Cuasi-Experimentales

    Manterola, Carlos; Otzen, Tamara

    2015-01-01

    Los estudios experimentales, se caracterizan por la valoración del efecto de una o más intervenciones, habitualmente de forma comparativa con otra intervención, o un placebo; y el carácter prospectivo, de la recolección de datos y seguimiento. Agrupados bajo esta denominación, existe una diversidad de diseños, entre los que se encuentran los estudios cuasi-experimentales (ECE), que se caracterizan especialmente por la ausencia de asignación aleatoria. El objetivo de este manuscrito, es report...

  3. An Ethology of Urban Fabric(s)

    Fritsch, Jonas; Thomsen, Bodil Marie Stavning

    2014-01-01

    The article explores a non-metaphorical understanding of urban fabric(s), shifting the attention from a bird’s eye perspective to the actual, textural manifestations of a variety of urban fabric(s) to be studied in their real, processual, ecological and ethological complexity within urban life. We...... effectuate this move by bringing into resonance a range of intersecting fields that all deal with urban fabric(s) in complementary ways (interaction design and urban design activism, fashion, cultural theory, philosophy, urban computing)....

  4. Fabrication and Prototyping Lab

    Federal Laboratory Consortium — Purpose: The Fabrication and Prototyping Lab for composite structures provides a wide variety of fabrication capabilities critical to enabling hands-on research and...

  5. Fabrication of recyclable superhydrophobic cotton fabrics

    Han, Sang Wook; Park, Eun Ji; Jeong, Myung-Geun; Kim, Il Hee; Seo, Hyun Ook; Kim, Ju Hwan; Kim, Kwang-Dae; Kim, Young Dok

    2017-04-01

    Commercial cotton fabric was coated with SiO2 nanoparticles wrapped with a polydimethylsiloxane (PDMS) layer, and the resulting material surface showed a water contact angle greater than 160°. The superhydrophobic fabric showed resistance to water-soluble contaminants and maintained its original superhydrophobic properties with almost no alteration even after many times of absorption-washing cycles of oil. Moreover, superhydrophobic fabric can be used as a filter to separate oil from water. We demonstrated a simple method of fabrication of superhydrophobic fabric with potential interest for use in a variety of applications.

  6. Estudios sobre plantas andinas,- V

    Cuatrecasas José

    1943-12-01

    Full Text Available Desde hace diez años, he venido interesándome por el conocimiento y clasificación del género Diplostephium, distribuido abundantemente en las zonas frías de los Andes, desde Venezuela al norte de Chile con un enclave en Costa Rica. Las excursiones realizadas en 1932 me permitieron descubrir dos nuevas especies colombianas (1 y el estudio de la colección Isern me dio oportunidad de conocer otras especies ecuatorianas y peruanas (2. A raíz del abundante material recogido en mis excursiones por Colombia desde el año 1938, decidí llevar a cabo el estudio monográfico del género; para ella diversos centros de los Estados Unidos pusieron a mi disposición sus coIecciones: Smithsonian Institution (United States National Herbarium, Field Museum of Natural History de Chicago y New York Botanical Garden, los cuales me remitieron el material para este fin al Instituto de Ciencias Naturales de Bogotá; el trabajo fue iniciado en este centro, pero al trasladarme a la Escuela Superior de Agricultura Tropical de Cali, la dirección del Instituto me permitió llevar para el Valle todos los ejemplares, incluso los del Herbario Nacional Colombiano, y así pude concluir el estudio provisional, en mi nuevo lugar de trabajo.

  7. Polymorphous computing fabric

    Wolinski, Christophe Czeslaw [Los Alamos, NM; Gokhale, Maya B [Los Alamos, NM; McCabe, Kevin Peter [Los Alamos, NM

    2011-01-18

    Fabric-based computing systems and methods are disclosed. A fabric-based computing system can include a polymorphous computing fabric that can be customized on a per application basis and a host processor in communication with said polymorphous computing fabric. The polymorphous computing fabric includes a cellular architecture that can be highly parameterized to enable a customized synthesis of fabric instances for a variety of enhanced application performances thereof. A global memory concept can also be included that provides the host processor random access to all variables and instructions associated with the polymorphous computing fabric.

  8. Estudios sobre Plantas Andinas, X

    Cuatrecasas José

    1967-09-01

    Full Text Available Durante la preparación del género Baccharis para Prima Flora Colombiana tuve que estudiar gran número de especies andinas, tropicales y extratropicales de fuera de Colombia; el objeto principal de tales estudios fue el de tipificar las especies íntimamente relacionadas con las colombianas y establecer su diferenciación taxonómica. La consulta de los tipos específicos y la identificación de gran número de colecciones procedentes de las regiones andinas hasta el sur del continente americano permitió precisar el concepto de bastantes especies y de su área geográfica, al mismo tiempo que el establecimiento de numerosas sinonimias.  La mayor parte de las novedades taxonómicas y de los comentarios derivados de tal estudio va incluída en el texto de las Astereae de Colombia a publicar en breve. El objeto de este artículo es dar a conocer otra parte de las novedades relativas a especies andinas de los países vecinos y describir varias entidades taxonómicas deficientemente conocidas, incorporando a su conocimiento los resultados de muchas disecciones llevadas a cabo en los mencionados estudios.  El trabajo basico para estas notas fue hecho en la Smithsonian Institution; se consultaron también las colecciones de los herbarios europeos de Londres, París, Florencia, Ginebra y Madrid en viaje hecho en otoño de 1963. National Science Foundation de Washington D.C. subvencionó los trabajos.

  9. LOS ESTUDIOS DE POBREZA URBANA

    Rina De León Herrera

    2007-08-01

    Full Text Available En este artículo se intenta mostrar en forma sucinta la evolución de los estudios de pobreza urbana; se retoma para ello la producción escritural de investigadores que han hecho aportes valiosos sobre la temática en diferentes épocas y espacios geográficos. La información se ha organizado en dos unidades de análisis: la producción escritural en los países desarrollados y en los países en desarrollo.

  10. Esclavizada en los Estudios Poscoloniales

    Nellys Montenegro De la Hoz

    2014-01-01

    Full Text Available Este ensayo va a centrarse en el análisis de las formas de resis - tencia e identidad esclavizada presentes en Changó, el gran putas de Manuel Zapata Olivella, a través del análisis de los discur - sos hegemónicos y subalternos que hacían parte del sistema de poder, y la intervención de las teorías o estudios poscoloniales que cuestionan dichas perspectivas para redefinir las diferencias de las identidades contradictorias y desarrollar de esta manera literaturas deslindadas de las estructuras ideológicas y hegemónicas.

  11. Fabrication of targets for transmutation of americium : synthesis of inertial matrix by sol-gel method. Procedure study on the infiltration of a radioactive solutions; Fabricacion de blancos para la transmutacion de americio: sintesis de matrices inertes por el metodo sol-gel. Estudio del procedimiento de infiltracion de disoluciones radiactivas

    Fernandez Carretero, A [Universidad Complutense de Madrid (Spain)

    2002-07-01

    Transmutation and incineration are innovative options in the management and disposal of fission products and actinides. nevertheless, the fabrication of targets for transmutation and incineration of actinides and fission products require a reconsideration of conventional processes (mechanical blending) and the development of new procedures compatible with the high activity of these materials. This work presents th R and D of a new fabrication method called INRAM (Infiltration of Radioactive Materials) based on the infiltration of an actinide solution in a porous non radiotoxic material in the form of a pellet (up to 12% An), or beads (up to 40% An) produced by sol-gel. The first method have been used for the fabrication of spinel (MgAl{sub 2}O{sub 4}) targets containing 11% Am, which have been irradiated in HFR-Petten (358.4 full power days). Post-test burn-up calculations showed that at the end of the irradiation the initial Am-241 concentration was reduced to 4%. The fraction of the initial americum atoms that have been fissioned is 28%. The main advantage of the INRAM method is that matrices with low or zero activity can be fabricated and formed into the required shape in an unshielded facility. This method offers other advantages over conventional ones, such as the active wastes are reduced, is easy to automate, adoptable to telemanipulation and dust free, which facilitate operator intervention and minimise radiation exposure to the personal. In addition, the infiltrant needs only be present in liquid form, i. e. it could be transferred directly from the reprocessing plant for fabrication into targets without conversion into-solid form. In order to optimise the infiltration process in depth investigations of all important process parameters, e. g. infiltration kinetics and metal (pu, Am) concentration in the feed solution, and also on extensive study or powder metallurgy parameters for the preparation of high quality fuel pellets with a high density, have been

  12. Perdurabilidad empresarial: concepto, estudios, hallazgos

    Hugo Alberto Rivera Rodríguez

    2012-06-01

    Full Text Available La literatura en dirección de empresas durante los últimos 20 años ha analizado diferentes aspectos de la perdurabilidad empresarial, sobre todo lo relacionado con el papel del líder, la asociación con la rentabilidad, y los efectos que genera en el tejido empresarial. Sin embargo, aún existen muchos aspectos en los cuales se debe profundizar. El primero de ellos es dar solución a la diversidad terminológica existente. Al no tener un consenso sobre el concepto, se utilizan de manera indiscriminada términos como longevidad, sostenibilidad, éxito, supervivencia, duración, etc., los cuales en lugar de aclarar, generan confusión. Por otro lado, tampoco hay evidencia suficiente para sugerir alternativas que permitan a las empresas lograr ser perdurables. El artículo que se presenta se fundamenta en una revisión exhaustiva del concepto de perdurabilidad empresarial, y hace una relación de los principales hallazgos encontrados en la literatura sobre las condiciones que pueden facilitar la perdurabilidad empresarial. Con ello se pretende de avanzar en el estudio de la relación entre la perdurabilidad, el comportamiento estratégico de las empresas y desempeño financiero.

  13. Fabric based supercapacitor

    Yong, S; Tudor, M J; Beeby, S P; Owen, J R

    2013-01-01

    Flexible supercapacitors with electrodes coated on inexpensive fabrics by the dipping technique. This paper present details of the design, fabrication and characterisation of fabric supercapacitor. The sandwich structured supercapacitors can achieve specific capacitances of 11.1F/g, area capacitance 105 mF.cm −2 and maintain 95% of the initial capacitance after cycling the device for more than 15000 times

  14. Funciones profesorales: un estudio factorial

    Pedro S. de VICENTE RODRÍGUEZ

    2009-11-01

    Full Text Available La preocupación por la «cantidad» ha privado durante mucho tiempo en el ámbito educativo; ha sido considerado esencial por los gobiernos la consecución de una «educación para todos». Sin embargo, el aumento de los costos no ha conllevado una mejora sustancial, una disminución efectiva de la ineficacia de los sistemas tradicionales de enseñanza; de ello dan fe las tasas de abandonos y repeticiones de curso. Esto conduce a considerar que la falta de correspondencia entre el aumento de los recursos destinados a educación y el rendimiento de las instituciones educativas sea un problema de «calidad» más que de «cantidad». De ahí que se hable hoy insistentemente de la mejora de la calidad de la educación. Al tema de la «calidad de la educación» se dedicó en 1981 un seminario organizado por la Escuela Asturiana de estudios Hispánicos. En él, Víctor García Hoz definía la calidad educativa «como el modo de ser de la educación que reúne las características de integridad, coherencia y eficacia»1, entendiendo la eficacia como la denotación de que el fin perseguido ha sido alcanzado, más que como producción de algo material, con lo que es posible hablar en términos de eficacia refiriéndose tanto a lo cuantitativo como a lo cualitativo.

  15. Fabrics in Function

    Bang, Anne Louise

    2007-01-01

    sensing of fabrics in function. It is proposed that tactile and visual sensing of fabrics is a way to investigate and express emotional utility values. The further purpose is to use experiments with repertory grid models as part of the mapping of the entire research project and also as a basis...

  16. Fabricating architectural volume

    Feringa, Jelle; Søndergaard, Asbjørn

    2015-01-01

    The 2011 edition of Fabricate inspired a number of collaborations, this article seeks to highlight three of these. There is a common thread amongst the projects presented: sharing the ambition to close the rift between design and fabrication while incorporating structural design aspects early on...

  17. Smart Fabrics Technology Development

    Simon, Cory; Potter, Elliott; Potter, Elliott; McCabe, Mary; Baggerman, Clint

    2010-01-01

    Advances in Smart Fabrics technology are enabling an exciting array of new applications for NASA exploration missions, the biomedical community, and consumer electronics. This report summarizes the findings of a brief investigation into the state of the art and potential applications of smart fabrics to address challenges in human spaceflight.

  18. Optics fabrication technical challenges

    Chabassier, G.; Ferriou, N.; Lavastre, E.; Maunier, C.; Neauport, J.; Taroux, D.; Balla, D.; Fornerod, J.C.

    2004-01-01

    Before the production of all the LMJ (MEGAJOULE laser) optics, the CEA had to proceed with the fabrication of about 300 large optics for the LIL (laser integration line) laser. Thanks to a fruitful collaboration with high-tech optics companies in Europe, this challenge has been successfully hit. In order to achieve the very tight requirements for cleanliness, laser damage threshold and all the other high demanding fabrication specifications, it has been necessary to develop and to set completely new fabrication process going and to build special outsize fabrication equipment. Through a couple of examples, this paper gives an overview of the work which has been done and shows some of the results which have been obtained: continuous laser glass melting, fabrication of the laser slabs, rapid-growth KDP (potassium dihydrogen phosphate) technology, large diffractive transmission gratings engraving and characterization. (authors)

  19. The use of radioactive inserts in the study of metal deformation during tube-making processes; Emploi de fils metalliques radioactifs pour l'etude des deformations des metaux pendant la fabrication de tubes; Ispol'zovanie radioaktivnykh vtulok dlya izucheniya deformatsii metallov pri protsesse izgotovleniya trub; Empleo de insertos radiactivos en el estudio de la deformacion de los metales durante la fabricacion de tubos

    Davison, W H.T. [Tube Investments Research Laboratories, Cambridge (United Kingdom)

    1962-01-15

    This paper reports on the use of radioactive inserts in studying the deformation of steel in hot rotary piercing for tube making. Iron or steel wires are activated in the pile, inserted in tubes drilled in iron or steel billets, which are then processed under normal production conditions. Careful monitoring shows that the radiation exposures and contamination of the plant are quite negligible. On cooling, the billets are scanned in the laboratory, using a collimated scintillationcounter mounted normal to the surface of the pierced billet, and isodose curves show the shape of the deformed insert normal to the tube surface. A similar scan of a section normal to the axis of the tube gives a second plot; from a combination of the two plots, a three-dimensional picture is obtained. Some results are quoted, but the main emphasis of the paper is on the experimental technique, which has quite general applicability to metal deformation studies. The insert must be located within a millimeter or thereabouts, for which a higher resolution is required than is normal in medical scanning techniques. The problems of achieving this are discussed in terms of {gamma}-energy, collimator design and energy discrimination. (author) [French] Le present memoire traite de l'emploi de fils metalliques radioactifs pour l'etude de la deformation de l'acier durant le forage rotatif a chaud en vue de la fabrication des tubes. Des fils de fer ou d'acier sont actives dans un reacteur et places dans des cavites tabulaires menagees a l'interieur de billettes de fer ou d'acier que l'on transforme ensuite dans les conditions de fabrication normales. Un controle radiologique minutieux montre que les dangers d'irradiation et de contamination dans l'usine sont pratiquement negligeables. Apres refroidissement, les billettes sont examinees en laboratoire au moyen d'un compteur a scintillations avec collimateur de faible ouverture, monte de facon que l'axe soit perpendiculaire a la surface de la billette

  20. ¿Son viables los créditos ects otorgados a las matemáticas en los nuevos planes de estudio de LADE?

    Álvarez Martínez, Pedro

    2006-01-01

    Full Text Available EL nuevo plan de estudios para la Administración y Dirección de Empresas (ADE va encaminado a resolver los problemas de la vida real en las empresas. Las disciplinas que lo contemplan están reguladas por los créditos ECTS (European Credit Transfer System, establecidos por la Commission of the European Community, con objeto de proporcionar procedimientos comunes que garanticen un reconocimiento académico de los estudios en los distintos paises que la integran. La presencia de las Matemáticas en los Planes es debido a su carácter instrumental, sus contenidos son utilizados por la demás disciplinas y le otorga el papel de ser una asignatura de servicio y “transversal”. El presente trabajo desarrolla una metodología empírica, determinando la temporización docente/discente de los contenidos matemáticos que son utilizados por todas las disciplinas que componen la titulación de ADE. Dichos contenidos han sido contabilizados y cuantificado en términos de créditos ECTS, aplicando los criterios que caracterizan su definición. El resultado obtenido pone de manifiesto que los créditos del nuevo plan no satisfacen las exigencias que caracterizan a los créditos ECTS para el aprendizaje de las matemáticas. Dado que los contenidos matemáticos no han cambiado, por exigencias de las disciplinas de ADE, los resultados obtenidos con datos experimentales, tras la reducción de horas de docencia, muestran lo siguiente: Con el Plan del 1973 (10 horas semanales de clase de Matemáticas se necesitaban 3 convocatorias para aprobar, con el plan actual (4 horas semanales de clase se necesitan 6 convocatorias. La reducción ha supuesto para el alumno un incremento de año y medio de estancia en la universidad, y como consecuencia aumenta el coste. Estudiar matemáticas para ADE era mas barato “antes” que “ahora”. La propuesta de los nuevos planes hace inviable el aprendizaje de las matemáticas en ADE.

  1. New polymorphous computing fabric

    Wolinski, Christophe; Gokhale, Maya; McCabe, Kevin P.

    2002-01-01

    This paper introduces a new polymorphous computing Fabric well suited to DSP and Image Processing and describes its implementation on a Configurable System on a Chip (CSOC). The architecture is highly parameterized and enables customization of the synthesized Fabric to achieve high performance for a specific class of application. For this reason it can be considered to be a generic model for hardware accelerator synthesis from a high level specification. Another important innovation is the Fabric uses a global memory concept, which gives the host processor random access to all the variables and instructions on the Fabric. The Fabric supports different computing models including MIMD, SPMD and systolic flow and permits dynamic reconfiguration. We present a specific implementation of a bank of FIR filters on a Fabric composed of 52 cells on the Altera Excalibur ARM running at 33 MHz. The theoretical performance of this Fabric is 1.8 GMACh. For the FIR application we obtain 1.6 GMAC/s real performance. Some automatic tools have been developed like the tool to provide a host access utility and assembler.

  2. Fabrication and characterisation of fabric supercapacitor

    Yong, Sheng

    2016-01-01

    Fabric supercapacitor is a flexible electrochemical device for energy storage application. It is designed to power up flexible electronic systems used for, for example, information sensing, data computation and communication. The development of a flexible supercapacitor is important for e-textiles since supercapacitor can achieve higher energy density than a standard parallel plate capacitor and a larger power density compared with a battery. This research area is currently facing barriers on...

  3. Junction and circuit fabrication

    Jackel, L.D.

    1980-01-01

    Great strides have been made in Josephson junction fabrication in the four years since the first IC SQUID meeting. Advances in lithography have allowed the production of devices with planar dimensions as small as a few hundred angstroms. Improved technology has provided ultra-high sensitivity SQUIDS, high-efficiency low-noise mixers, and complex integrated circuits. This review highlights some of the new fabrication procedures. The review consists of three parts. Part 1 is a short summary of the requirements on junctions for various applications. Part 2 reviews intergrated circuit fabrication, including tunnel junction logic circuits made at IBM and Bell Labs, and microbridge radiation sources made at SUNY at Stony Brook. Part 3 describes new junction fabrication techniques, the major emphasis of this review. This part includes a discussion of small oxide-barrier tunnel junctions, semiconductor barrier junctions, and microbridge junctions. Part 3 concludes by considering very fine lithography and limitations to miniaturization. (orig.)

  4. Construction, fabrication, and installation

    1992-05-01

    This standard specifies the construction, fabrication, and installation requirements that apply to concrete containment structures of a containment system designated as class containment components, parts and appurtenances for nuclear power plants

  5. Experimental Fabrication Facility

    Federal Laboratory Consortium — Provides aviation fabrication support to special operations aircraft residing at Fort Eustis and other bases in the United States. Support is also provided to AATD...

  6. Alloy Fabrication Laboratory

    Federal Laboratory Consortium — At NETL’s Alloy Fabrication Facility in Albany, OR, researchers conduct DOE research projects to produce new alloys suited to a variety of applications, from gas...

  7. Fabricating nuclear components

    Anon.

    1977-01-01

    Activities of the Nuclear Engineering Division of Vickers Ltd., particularly fabrication of long slim tubular components for power reactors and the construction of irradiation loops and rigs, are outlined. The processes include hydraulic forming for fabrication of various types of tubes and outer cases of fuel transfer buckets, various specialised welding operations including some applications of the TIG process, and induction brazing of specialised assemblies. (U.K.)

  8. Nuclear Fabrication Consortium

    Levesque, Stephen [EWI, Columbus, OH (United States)

    2013-04-05

    This report summarizes the activities undertaken by EWI while under contract from the Department of Energy (DOE) Office of Nuclear Energy (NE) for the management and operation of the Nuclear Fabrication Consortium (NFC). The NFC was established by EWI to independently develop, evaluate, and deploy fabrication approaches and data that support the re-establishment of the U.S. nuclear industry: ensuring that the supply chain will be competitive on a global stage, enabling more cost-effective and reliable nuclear power in a carbon constrained environment. The NFC provided a forum for member original equipment manufactures (OEM), fabricators, manufacturers, and materials suppliers to effectively engage with each other and rebuild the capacity of this supply chain by : Identifying and removing impediments to the implementation of new construction and fabrication techniques and approaches for nuclear equipment, including system components and nuclear plants. Providing and facilitating detailed scientific-based studies on new approaches and technologies that will have positive impacts on the cost of building of nuclear plants. Analyzing and disseminating information about future nuclear fabrication technologies and how they could impact the North American and the International Nuclear Marketplace. Facilitating dialog and initiate alignment among fabricators, owners, trade associations, and government agencies. Supporting industry in helping to create a larger qualified nuclear supplier network. Acting as an unbiased technology resource to evaluate, develop, and demonstrate new manufacturing technologies. Creating welder and inspector training programs to help enable the necessary workforce for the upcoming construction work. Serving as a focal point for technology, policy, and politically interested parties to share ideas and concepts associated with fabrication across the nuclear industry. The report the objectives and summaries of the Nuclear Fabrication Consortium

  9. El creciente campo de los Estudios Sensoriales

    David Howes

    2014-09-01

    Full Text Available Este ensayo presenta una breve descripción acerca del giro sensorial en la investigación contemporánea, y propone algunas perspectivas de trabajo para futuras investigaciones. Esta labor no pretende ser exhaustiva y, más bien, busca indicar las principales tendencias en este campo. El ensayo, en su primera parte, ofrece una mirada general sobre la aparición y el desarrollo de la historia y la antropología de los sentidos. En la segunda parte, la atención se concentra en cómo el campo de los estudios sensoriales puede ser, de otro lado, conceptualizado como compuesto de cultura visual, cultura auditiva (o estudios del sonido, cultura del olfato, cultura del gusto y cultura del tacto. Se ofrece una explicación acerca de la génesis de estas divisiones. Posteriormente, se presenta una visión general de algunas cuestiones claves en los estudios sensoriales, como la pregunta por el número de los sentidos y la relación entre orden sensorial y orden social. El ensayo concluye con ocho proposiciones para los estudios sensoriales.

  10. El creciente campo de los Estudios Sensoriales

    David Howes

    2014-08-01

    Full Text Available Este ensayo presenta una breve descripción acerca del giro sensorial en la investigación contemporánea, y propone algunas perspectivas de trabajo para futurasinvestigaciones. Esta labor no pretende ser exhaustiva y, más bien, busca indicar las principales tendencias en este campo. El ensayo, en su primera parte, ofrece una mirada general sobre la aparición y el desarrollo de la historia y la antropología de los sentidos. En la segunda parte, la atención se concentra en cómo el campo de los estudios sensoriales puede ser, de otro lado, conceptualizado como compuesto de cultura visual, cultura auditiva (o estudios del sonido, cultura del olfato, cultura del gusto y cultura del tacto. Se ofrece una explicación acerca de la génesis de estas divisiones. Posteriormente,se presenta una visión general de algunas cuestiones claves en los estudios sensoriales, como la pregunta por el número de los sentidos y la relación entre orden sensorial y orden social. El ensayo concluye con ocho proposiciones para los estudios sensoriales.

  11. Understanding core conductor fabrics

    Swenson, D E

    2011-01-01

    ESD Association standard test method ANSI/ESD STM2.1 - Garments (STM2.1), provides electrical resistance test procedures that are applicable for materials and garments that have surface conductive or surface dissipative properties. As has been reported in other papers over the past several years 1 fabrics are now used in many industries for electrostatic control purposes that do not have surface conductive properties and therefore cannot be evaluated using the procedures in STM2.1 2 . A study was conducted to compare surface conductive fabrics with samples of core conductor fibre based fabrics in order to determine differences and similarities with regards to various electrostatic properties. This work will be used to establish a new work item proposal within WG-2, Garments, in the ESD Association Standards Committee in the USA.

  12. Fabrication of multilayer nanowires

    Kaur, Jasveer, E-mail: kaurjasveer89@gmail.com; Singh, Avtar; Kumar, Davinder [Department of Physics, Punjabi University Patiala, 147002, Punjab (India); Thakur, Anup; Kaur, Raminder, E-mail: raminder-k-saini@yahoo.com [Department of Basic and Applied Sciences, Punjabi University Patiala, 147002, Punjab (India)

    2016-05-06

    Multilayer nanowires were fabricated by potentiostate ectrodeposition template synthesis method into the pores of polycarbonate membrane. In present work layer by layer deposition of two different metals Ni and Cu in polycarbonate membrane having pore size of 600 nm were carried out. It is found that the growth of nanowires is not constant, it varies with deposition time. Scanning electron microscopy (SEM) is used to study the morphology of fabricated multilayer nanowires. An energy dispersive X-ray spectroscopy (EDS) results confirm the composition of multilayer nanowires. The result shows that multilayer nanowires formed is dense.

  13. MOX Fabrication Isolation Considerations

    Eric L. Shaber; Bradley J Schrader

    2005-08-01

    This document provides a technical position on the preferred level of isolation to fabricate demonstration quantities of mixed oxide transmutation fuels. The Advanced Fuel Cycle Initiative should design and construct automated glovebox fabrication lines for this purpose. This level of isolation adequately protects the health and safety of workers and the general public for all mixed oxide (and other transmutation fuel) manufacturing efforts while retaining flexibility, allowing parallel development and setup, and minimizing capital expense. The basis regulations, issues, and advantages/disadvantages of five potential forms of isolation are summarized here as justification for selection of the preferred technical position.

  14. Fabrication of multilayer nanowires

    Kaur, Jasveer; Singh, Avtar; Kumar, Davinder; Thakur, Anup; Kaur, Raminder

    2016-01-01

    Multilayer nanowires were fabricated by potentiostate ectrodeposition template synthesis method into the pores of polycarbonate membrane. In present work layer by layer deposition of two different metals Ni and Cu in polycarbonate membrane having pore size of 600 nm were carried out. It is found that the growth of nanowires is not constant, it varies with deposition time. Scanning electron microscopy (SEM) is used to study the morphology of fabricated multilayer nanowires. An energy dispersive X-ray spectroscopy (EDS) results confirm the composition of multilayer nanowires. The result shows that multilayer nanowires formed is dense.

  15. Casos de Estudio de Distribuciones de Probabilidad para Turismo

    Fernández Morales, Antonio

    2016-01-01

    Este trabajo propone diversos casos de estudio para el estudio de las distribuciones de probabilidad aplicadas a la investigación y la práctica profesional en el ámbito del turismo. Se afronta el estudio de distribuciones de probabilidad, tanto de variables aleatorias discretas como continuas.

  16. Text-Fabric

    Roorda, Dirk

    2016-01-01

    Text-Fabric is a Python3 package for Text plus Annotations. It provides a data model, a text file format, and a binary format for (ancient) text plus (linguistic) annotations. The emphasis of this all is on: data processing; sharing data; and contributing modules. A defining characteristic is that

  17. PIGMI mechanical fabrication

    Hart, V.E.

    1976-01-01

    A prime goal of the mechanical design effort associated with the PIGMI (Pion Generator for Medical Irradiations) program is to investigate new materials and fabrication techniques in an effort to obtain increased machine efficiency and reliability at a reasonable cost. The following discussion deals with the modeling program that LASL is pursuing for 450-MHz and 1350-MHz PIGMI development. (author)

  18. Micromechanical Structures Fabrication; FINAL

    Rajic, S

    2001-01-01

    Work in materials other than silicon for MEMS applications has typically been restricted to metals and metal oxides instead of more ''exotic'' semiconductors. However, group III-V and II-VI semiconductors form a very important and versatile collection of material and electronic parameters available to the MEMS and MOEMS designer. With these materials, not only are the traditional mechanical material variables (thermal conductivity, thermal expansion, Young's modulus, etc.) available, but also chemical constituents can be varied in ternary and quaternary materials. This flexibility can be extremely important for both friction and chemical compatibility issues for MEMS. In addition, the ability to continually vary the bandgap energy can be particularly useful for many electronics and infrared detection applications. However, there are two major obstacles associated with alternate semiconductor material MEMS. The first issue is the actual fabrication of non-silicon micro-devices and the second impediment is communicating with these novel devices. We have implemented an essentially material independent fabrication method that is amenable to most group III-V and II-VI semiconductors. This technique uses a combination of non-traditional direct write precision fabrication processes such as diamond turning, ion milling, laser ablation, etc. This type of deterministic fabrication approach lends itself to an almost trivial assembly process. We also implemented a mechanical, electrical, and optical self-aligning hybridization technique for these alternate-material MEMS substrates

  19. Fabrication activity for nanophotonics

    Malureanu, Radu; Chung, Il-Sug; Carletti, Luca

    We present the fabrication and characterization of new structures and materials to be used in nanophotonics. The first structure presented is a fractal metallic metasurface designed to be used as a high-sensitivity sensor for 810nm wavelength. A second structure is a high index contrast grating...

  20. Estudios de competitividad en sistemas urbano - territoriales

    Esteban Soms García

    2007-05-01

    El Ministerio de Planificación y Cooperación de Chile, ha desarrollado varios estudios relacionados con la competitividad regional, destinados a pronosticar y evaluar los impactos positivos y negativos que podrían derivarse de los recientes Acuerdos de Libre Comercio suscritos por Chile con la Comunidad Europea, Estados Unidos y Corea, más los acuerdos ad portas con los Países de la APEC. En lo referente a competitividad urbana, destacan algunos estudios y proyectos relacionados con el programa gubernamental "Ciudades para el Bicentenario", impulsado el Ministerio de Vivienda y Urbanismo y los Gobiernos Regionales de Antofagasta, Bio Bio, Valparaíso y Santiago.

  1. Estrategia organizacional: una propuesta de estudio

    Ángela Lucía Noguera Hidalgo

    2014-01-01

    Full Text Available El concepto de estrategia en el contexto de las organizaciones empresariales es uno de los temas que genera gran interés en los asuntos del management. Sin embargo, la proposición de nuevos enfoques no ha aportado significativamente al avance en el estudio de este concepto. El estancamiento se hace evidente, razón por la cual el presente documento esboza una propuesta que reúne algunos de los retos para el estudio de la estrategia. En él se presenta una revisión que deja por sentados los posibles caminos a seguir, los cuales contribuyen a la perdurabilidad de las organizaciones.

  2. Status report, canister fabrication

    Andersson, Claes-Goeran; Eriksson, Peter; Westman, Marika [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Emilsson, Goeran [CSM Materialteknik AB, Linkoeping (Sweden)

    2004-06-01

    The report gives an account of the development of material and fabrication technology for copper canisters with cast inserts during the period from 2000 until the start of 2004. The engineering design of the canister and the choice of materials in the constituent components described in previous status reports have not been significantly changed. In the reference canister, the thickness of the copper shell is 50 mm. Fabrication of individual components with a thinner copper thickness is done for the purpose of gaining experience and evaluating fabrication and inspection methods for such canisters. As a part of the development of cast inserts, computer simulations of the casting processes and techniques used at the foundries have been performed for the purpose of optimizing the material properties. These properties have been evaluated by extensive tensile testing and metallographic inspection of test material taken from discs cut at different points along the length of the inserts. The testing results exhibit a relatively large spread. Low elongation values in certain tensile test specimens are due to the presence of poorly formed graphite, porosities, slag or other casting defects. It is concluded in the report that it will not be possible to avoid some presence of observed defects in castings of this size. In the deep repository, the inserts will be exposed to compressive loading and the observed defects are not critical for strength. An analysis of the strength of the inserts and formulation of relevant material requirements must be based on a statistical approach with probabilistic calculations. This work has been initiated and will be concluded during 2004. An initial verifying compression test of a canister in an isostatic press has indicated considerable overstrength in the structure. Seamless copper tubes are fabricated by means of three methods: extrusion, pierce and draw processing, and forging. It can be concluded that extrusion tests have revealed a

  3. Status report, canister fabrication

    Andersson, Claes-Goeran; Eriksson, Peter; Westman, Marika; Emilsson, Goeran

    2004-06-01

    The report gives an account of the development of material and fabrication technology for copper canisters with cast inserts during the period from 2000 until the start of 2004. The engineering design of the canister and the choice of materials in the constituent components described in previous status reports have not been significantly changed. In the reference canister, the thickness of the copper shell is 50 mm. Fabrication of individual components with a thinner copper thickness is done for the purpose of gaining experience and evaluating fabrication and inspection methods for such canisters. As a part of the development of cast inserts, computer simulations of the casting processes and techniques used at the foundries have been performed for the purpose of optimizing the material properties. These properties have been evaluated by extensive tensile testing and metallographic inspection of test material taken from discs cut at different points along the length of the inserts. The testing results exhibit a relatively large spread. Low elongation values in certain tensile test specimens are due to the presence of poorly formed graphite, porosities, slag or other casting defects. It is concluded in the report that it will not be possible to avoid some presence of observed defects in castings of this size. In the deep repository, the inserts will be exposed to compressive loading and the observed defects are not critical for strength. An analysis of the strength of the inserts and formulation of relevant material requirements must be based on a statistical approach with probabilistic calculations. This work has been initiated and will be concluded during 2004. An initial verifying compression test of a canister in an isostatic press has indicated considerable overstrength in the structure. Seamless copper tubes are fabricated by means of three methods: extrusion, pierce and draw processing, and forging. It can be concluded that extrusion tests have revealed a

  4. ESTUDIOS (INTERCULTURALES EN CLAVE DE-COLONIAL

    Catherine Walsh

    2010-01-01

    Full Text Available Los «estudios culturales» en América Latina forman parte de una política de nombrar inscrita en legados y cartografiados frecuentemente como totalidad, ocultando o dejando pasar por alto las diferencias a su interior. Este articula examina desde dónde nacen los estudios culturales en América Latina en general y en la Universidad Andina Simón Bolívar en Quito en particular, con qué política de nombramiento, qué proyecto(s y qué bases y perspectivas de conocimiento. Considera qué implica concebir y construir los estudios culturales como proyecto político-intelectual, inter-cultural, inter-epistémico y de orientación de-colonial y los desafíos y obstáculos al respecto, incluyendo dentro de la problemática misma de la «uni»-versidad.

  5. Automated breeder fuel fabrication

    Goldmann, L.H.; Frederickson, J.R.

    1983-01-01

    The objective of the Secure Automated Fabrication (SAF) Project is to develop remotely operated equipment for the processing and manufacturing of breeder reactor fuel pins. The SAF line will be installed in the Fuels and Materials Examination Facility (FMEF). The FMEF is presently under construction at the Department of Energy's (DOE) Hanford site near Richland, Washington, and is operated by the Westinghouse Hanford Company (WHC). The fabrication and support systems of the SAF line are designed for computer-controlled operation from a centralized control room. Remote and automated fuel fabriction operations will result in: reduced radiation exposure to workers; enhanced safeguards; improved product quality; near real-time accountability, and increased productivity. The present schedule calls for installation of SAF line equipment in the FMEF beginning in 1984, with qualifying runs starting in 1986 and production commencing in 1987. 5 figures

  6. OPO fabric decontamination

    Severa, J.; Bar, J.; Grujbar, V.

    1978-01-01

    Samples of five polypropylene-based man-made fabrics were studied with regard to the degree of contamination and possibilities of decontamination in order to assess their suitability as material for protective clothing in the nuclear industry. The contamination degree of the fabrics in an aqueous solution of a fission product mixture was found to be low. Soaking in a mixture of the Sapon detergent and sodium hexametaphosphate at a concentration of both materials of 1 g/l with subsequent washing in a solution of the Zenit detergent at a concentration of 3 g/l was suggested as the most suitable decontamination procedure. It reduces the initial contamination by almost 99%. (Z.M.)

  7. Intentionally fabricated autobiographical memories

    Justice, LV; Morrison, CM; Conway, MA

    2017-01-01

    Participants generated both autobiographical memories (AMs) that they believed to be true and intentionally fabricated autobiographical memories (IFAMs). Memories were constructed while a concurrent memory load (random 8-digit sequence) was held in mind or while there was no concurrent load. Amount and accuracy of recall of the concurrent memory load was reliably poorer following generation of IFAMs than following generation of AMs. There was no reliable effect of load on memory generation ti...

  8. Colored fused filament fabrication

    Song, Haichuan; Lefebvre, Sylvain

    2017-01-01

    Filament fused fabrication is the method of choice for printing 3D models at low cost, and is the de-facto standard for hobbyists, makers and schools. Unfortunately, filament printers cannot truly reproduce colored objects. The best current techniques rely on a form of dithering exploiting occlusion, that was only demonstrated for shades of two base colors and that behaves differently depending on surface slope. We explore a novel approach for 3D printing colored objects, capable of creating ...

  9. The fabrication of andean particularism

    1989-01-01

    Full Text Available Ce travail aborde la question des liens que la société coloniale garde avec son passé. Plutôt que de concevoir cette relation en termes de survie d'une culture indigène authentique à travers le canal de la résistance, l'auteur met l'accent sur la fabrication de la tradition au sein de l'appareil étatique du régime colonial et montre comment la résistance politique tournée vers le passé réutilise cette tradition. Cette recherche part de l'étude de cas que présente un incident peu connu dans les Andes du nord, lié au 'culte à l'Inca' et survenu dans l'Audience de Quito, au XVIIème siècle. Un tel objet d'étude semble fort riche d'enseignements et nous laisse entrevoir le rapport existant entre l'autorité et la tradition, car il met en lumière les mécanismes de remémoration, conservation et de récupération du passé. Este trabajo aborda la problemática de la relación que la sociedad colonial mantiene con su pasado. En vez de concebir esta relación a través de la figura de la conservación de la cultura andina por la vía de la resistencia, enfoca la fabricación de la tradición (de la memoria y de las costumbres en el seno de los aparatos estatales del régimen colonial. Muestra como la resistencia política orientada hacia el pasado reutiliza la tradición inventada dentro de los dispositivos disciplinarios. La discusión de estos temas se lleva a cabo en base a un estudio de caso de un incidente del culto al Inca y de resistencia enfocada en el simbolismo del Inca, que tuvo lugar en la Audiencia de Quito a mediados del siglo diecisiete. La invocación del Inca en la época colonial ofrece un campo privilegiado para examinar la relación entre la autoridad y los orígenes, ya que implica la conmemoración, continuación y recuperación del pasado. This paper addresses the issue of the relationship that the colonial order keeps with its past. Instead of conceiving this relation in terms of the preservation of an

  10. Advanced fuel fabrication

    Bernard, H.

    1989-01-01

    This paper deals with the fabrication of advanced fuels, such as mixed oxides for Pressurized Water Reactors or mixed nitrides for Fast Breeder Reactors. Although an extensive production experience exists for the mixed oxides used in the FBR, important work is still needed to improve the theoretical and technical knowledge of the production route which will be introduced in the future European facility, named Melox, at Marcoule. Recently, the feasibility of nitride fuel fabrication in existing commercial oxide facilities was demonstrated in France. The process, based on carbothermic reduction of oxides with subsequent comminution of the reaction product, cold pressing and sintering provides (U, Pu)N pellets with characteristics suitable for irradiation testing. Two experiments named NIMPHE 1 and 2 fabricated in collaboration with ITU, Karlsruhe, involve 16 nitride and 2 carbide pins, operating at a linear power of 45 and 73 kW/m with a smear density of 75-80% TD and a high burn-up target of 15 at%. These experiments are currently being irradiated in Phenix, at Marcoule. (orig.)

  11. ESTUDIOS TRANSCULTURALES DEL BURNOUT: LOS ESTUDIOS TRANSCULTURALES BRASIL-ESPAÑA

    Macarena Gálvez Herrer

    2003-07-01

    Full Text Available Los estudios transculturales no son un ejercicio secundario y complementario en el estudio de la psicología; un modelo antropológico de la conducta humana obliga a plantear que las variables culturales no son secundarias sino primarias. Por estas razones el estudio del “burnout†o desgaste profesional puede profundizarse mediante la utilización de los métodos transculturales. No es suficiente con la simple comparación de resultados, sino que es necesario buscar instrumentos propios de cada cultura y establecer la comparación no sólo del síndrome de desgaste profesional sino de todos los diferentes elementos del proceso. El trabajo presentado establece las bases teóricas de este planteamiento, y expone, mediante un ejemplo, algunas de las vías posibles para una psicología transcultural del burnout.

  12. Estudios transculturales del burnout: Los estudios transculturales Brasil-España

    Bernardo Moreno Jiménez

    2003-01-01

    Full Text Available Los estudios transculturales no son un ejercicio secundario y complementario en el estudio de la psicología; un modelo antropológico de la conducta humana obliga a plantear que las variables culturales no son secundarias sino primarias. Por estas razones el estudio del “burnout” o desgaste profesional puede profundizarse mediante la utilización de los métodos transculturales. No es suficiente con la simple comparación de resultados, sino que es necesario buscar instrumentos propios de cada cultura y establecer la comparación no sólo del síndrome de desgaste profesional sino de todos los diferentes elementos del proceso. El trabajo presentado establece las bases teóricas de este planteamiento, y expone, mediante un ejemplo, algunas de las vías posibles para una psicología transcultural del burnout

  13. ESTUDIO DE FRACCIONES EN CONTEXTOS SONOROS

    Alexander Conde

    2016-01-01

    Full Text Available En este ensayo resaltamos los vínculos cognitivos entre las matemáticas y la música, que pueden favorecer procesos de enseñanza y aprendizaje de las fracciones en la matemática escolar. Las actividades exhibidas provienen de una investigación que promueve experiencias sensoriales en el campo rítmico para favorecer la construcción de nociones matemáticas. Dichas actividades posibilitan un engranaje armónico entre las matemáticas y la música convergentes en el tiempo y el sonido como los objetos de estudio común entre éstas disciplinas. El análisis de la investigación que aquí reportamos es producto de la aplicación de las actividades en diferentes programas de formación de profesorado de México y Francia, alrededor de la enseñanza y aprendizaje de las matemáticas en contextos interdisciplinarios. Este análisis se desarrolló desde tres categorías referentes a las nociones de unidad relativa, relación parte-parte y equipartición, las cuales son nociones fundamentales para el estudio de las fracciones en la matemática escolar. Encontramos que la enseñanza con enfoque integrador requiere no solo conocimientos especializados, sino un cambio de creencias en torno a las opiniones del profesorado sobre la organización del currículo, su enseñanza y la manera en que aprende la población estudiantil. Un aporte de esta experiencia es ofrecer a docentes elementos teóricos y didácticos para el estudio de las fracciones en contextos interdisciplinarios.

  14. Estudio de un caso de control interno

    Alfonso Pirela

    2005-01-01

    El estudio se efectuó con el objetivo de analizar el control interno en el Almacén de la Facultad de ciencias Económicas y Sociales de la Universidad del Zulia. La metodología fue descriptiva. Se utilizó como población a todo el personal del almacén. Los resultados arrojaron que el control del almacén no cuenta con un sistema de control interno integrado que le permita llevar con efectividad las actividades de recepción, almacenamiento y despacho de la mercancía.

  15. Estudio de un caso de control interno

    Alfonso Pirela

    2005-09-01

    Full Text Available El estudio se efectuó con el objetivo de analizar el control interno en el Almacén de la Facultad de ciencias Económicas y Sociales de la Universidad del Zulia. La metodología fue descriptiva. Se utilizó como población a todo el personal del almacén. Los resultados arrojaron que el control del almacén no cuenta con un sistema de control interno integrado que le permita llevar con efectividad las actividades de recepción, almacenamiento y despacho de la mercancía.

  16. Estudio sobre redes sociales y estudiantes

    Toledo Morales, Purificación; Sánchez García, José Manuel

    2012-01-01

    En este estudio pretendemos analizar cómo una muestra de 150 estudiantes utiliza las redes sociales, y explorar el impacto de estas en el rendimiento académico de los mismos. Los datos recogidos de la aplicación y análisis de una escala de opinión revelaron que mas de la mitad de los estudiantes encuestados utilizan internet con una finalidad puramente recreativa, y las redes sociales para estar en contacto con los amigos. La mayoría de los encuestados rechazan las solicitudes de amistad de d...

  17. Amplificadores con transistores. Estudio y dimensionado

    Lubiano García, Adrián

    2017-01-01

    Este trabajo es un estudio de las distintas configuraciones de los amplificadores con transistores vistos en la asignatura de Electrónica Analógica del tercer curso del Grado en Ingeniería en Electrónica Industrial y Automática de la Escuela de Ingenierías Industriales de la Universidad de Valladolid. En este trabajo se mostrarán los pasos seguidos en la creación de una aplicación con Visual Basic para la realización de los ejercicios de las distintas configuraciones, así...

  18. Estudio del álbum sin palabras

    Bosch Andreu, Emma

    2015-01-01

    [spa] Estudio del Álbum Sin Palabras tiene como objetivo principal definir, analizar y categorizar los álbumes sin palabras destinados principalmente al público infantil y juvenil dando a conocer sus características, peculiariades y diversidad tipológica, para facilitar las tareas de análisis y de mediación de investigadores, educadores, bibliotecarios y cualquier persona interesada en los libros con imágenes. En el capítulo titulado «Un nuevo mapa para los Libros Sin Palabras» situamos e...

  19. Anorexia nervosa: un estudio de casos

    Zusman, Lillyana

    2013-01-01

    La Anorexia Nervosa es un trastorno de alimentación que se define (etimológicamente) como una "pérdida nerviosa del apetito". Se caracteriza por la actitud consciente, voluntaria y rotunda de los sujetos  de tener un exceso de peso que intentan modificar por vía de la inanición. A partir del estudio de casos, se propone la distinción entre una Anorexia Nervosa Estructural -aquella en la que predomina el conflicto intrapsíquico primario y arcaico, y que manifiesta una conducta aislada y retraí...

  20. Intraocular lens fabrication

    Salazar, Mike A. (Albuquerque, NM); Foreman, Larry R. (Los Alamos, NM)

    1997-01-01

    This invention describes a method for fabricating an intraocular lens made rom clear Teflon.TM., Mylar.TM., or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube.

  1. Intraocular lens fabrication

    Salazar, M.A.; Foreman, L.R.

    1997-07-08

    This invention describes a method for fabricating an intraocular lens made from clear Teflon{trademark}, Mylar{trademark}, or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube. 13 figs.

  2. Mask fabrication process

    Cardinale, Gregory F.

    2000-01-01

    A method for fabricating masks and reticles useful for projection lithography systems. An absorber layer is conventionally patterned using a pattern and etch process. Following the step of patterning, the entire surface of the remaining top patterning photoresist layer as well as that portion of an underlying protective photoresist layer where absorber material has been etched away is exposed to UV radiation. The UV-exposed regions of the protective photoresist layer and the top patterning photoresist layer are then removed by solution development, thereby eliminating the need for an oxygen plasma etch and strip and chances for damaging the surface of the substrate or coatings.

  3. Advanced fabrication technology

    Sheely, W.F.

    1986-01-01

    The Fuel Cycle Plant is a multipurpose nuclear facility located on the Hanford Nuclear Reservation in eastern Washington state. The facility is part of the Hanford Engineering Development Laboratory which is operated by Westinghouse Hanford Company for the Department of Energy. The Fuel Cycle Plant is currently being prepared to support the Liquid Metal Reactors Program with fuel fabrication services for the Fast Flux Test Facility and other LMR programs. This report describes the technical innovations to be utilized in the operation of this plant

  4. Estudio sobre encofrados de madera modernos

    de la Peña Aznar, Juan M.

    1980-11-01

    Full Text Available The author continues the development of the subject «Modern Timber Formwork», by summing up the comparative examination —already carried out in Part III of this Study— of the different types of glued timber existing on the market. In addition, the loads and stresses allowable for coniferous timber and the proposal for establishing Regulations for the Timber Section of the Research and Experimental Forestry Institute of Spain are given. In part V of the author's Study, published in this article, the important subject of the glues used for joining timber, a truly vital point in order to obtain louvered timber beams which are simply glued together, is approached.

    El autor continúa el desarrollo del tema sobre «Encofrados de madera modernos», resumiendo el estudio comparativo —ya hecho en la Parte III de este Estudio— de las diferentes vigas de madera encolada existentes en el mercado dando, además, las cargas y tensiones admisibles para maderas coníferas y la propuesta de Reglamentación de la Sección de Maderas del Instituto Forestal de Investigaciones y Experiencias de España. En la parte V del Estudio del autor, publicada en este articulo, se aborda el importante tema de las colas empleadas para las uniones de madera, algo realmente vital para la obtención de vigas de madera en celosía simplemente encoladas.

  5. Fabrication of zein nanostructure

    Luecha, Jarupat

    The concerns on the increase of polluting plastic wastes as well as the U.S. dependence on imported petrochemical products have driven an attention towards alternative biodegradable polymers from renewable resources. Zein protein, a co-product from ethanol production from corn, is a good candidate. This research project aims to increase zein value by adopting nanotechnology for fabricating advanced zein packaging films and zein microfluidic devices. Two nanotechnology approaches were focused: the polymer nanoclay nanocomposite technique where the nanocomposite structures were created in the zein matrix, and the soft lithography and the microfluidic devices where the micro and nanopatterns were created on the zein film surfaces. The polymer nanoclay nanocomposite technique was adopted in the commonly used zein film fabrication processes which were solvent casting and extrusion blowing methods. The two methods resulted in partially exfoliated nanocomposite structures. The impact of nanoclays on the physical properties of zein films strongly depended on the film preparation techniques. The impact of nanoclay concentration was more pronounced in the films made by extrusion blowing technique than by the solvent casting technique. As the processability limitation for the extrusion blowing technique of the zein sample containing hight nanoclay content, the effect of the nanoclay content on the rheological properties of zein hybrid resins at linear and nonlinear viscoelastic regions were further investigated. A pristine zein resin exhibited soft solid like behavior. On the other hand, the zein hybrid with nanoclay content greater than 5 wt.% showed more liquid like behavior, suggesting that the nanoclays interrupted the entangled zein network. There was good correspondence between the experimental data and the predictions of the Wagner model for the pristine zein resins. However, the model failed to predict the steady shear properties of the zein nanoclay nanocomposite

  6. Estudios Experimentales 1 Parte: El Ensayo Clínico

    Manterola, Carlos; Otzen, Tamara

    2015-01-01

    Los estudios experimentales, se caracterizan por la valoración del efecto de una o más intervenciones, habitualmente de forma comparativa con otra intervención, o un placebo; y el carácter prospectivo, de la recolección de los datos y el seguimiento de los grupos en estudio. Bajo la denominación de estudios experimentales, existe una diversidad de diseños, desde los ensayos clínicos (EC) y sus variantes, hasta los estudios cuasi-experimentales y los experientos naturales. El objetivo de este ...

  7. Estudio “Cumple con SAM”

    Escribá MP

    2009-06-01

    Full Text Available INTRODUCCIÓN Existen estudios que demuestran los beneficios de los sistemas personalizados de dosificación para aumentar la adherencia al tratamiento en pacientes polimedicados. Recientemente se puso en el mercado un sistema de administración de medicamentos (SAM, portable y de pequeño tamaño, que combina un reloj con alarmas programables y varios compartimentos en donde colocar las formas farmacéuticas de los medicamentos. Para la valoración de su utilidad se ha realizado un estudio piloto de satisfacción sobre el SAM entre los pacientes diana de estos dispositivos, solicitando, tras un breve período de uso, su opinión sobre las características del mismo. Se ha evaluando también la mejora del cumplimiento. MATERIAL Y MÉTODOS 43 farmacéuticos comunitarios voluntarios de 26 oficinas de farmacia ubicadas en 5 provincias reclutaron sobre la base de unos criterios de inclusión y exclusión 302 pacientes incumplidores para que utilizasen durante al menos 15 días el SAM y, posteriormente, rellenasen una encuesta de opinión sobre éste. RESULTADOS La opinión del 91% de los pacientes participantes en el estudio es que el SAM es útil, muy útil o imprescindible como sistema de administración de medicamentos. El incumplimiento autocomunicado pasa del 87% al 23% de pacientes. El SAM puede ser útil para los pacientes como sistema de administración de medicamentos en la mejora de la adherencia a su tratamiento farmacológico en la medida en que disminuye los olvidos. Sin embargo, también ponen de manifiesto algunos problemas de diseño mejorables como son el excesivo tamaño, dificultad de apertura e intensidad del sonido. Estos dos últimos problemas dificultan su uso entre la población de mayor edad.

  8. Intentionally fabricated autobiographical memories.

    Justice, Lucy V; Morrison, Catriona M; Conway, Martin A

    2018-02-01

    Participants generated both autobiographical memories (AMs) that they believed to be true and intentionally fabricated autobiographical memories (IFAMs). Memories were constructed while a concurrent memory load (random 8-digit sequence) was held in mind or while there was no concurrent load. Amount and accuracy of recall of the concurrent memory load was reliably poorer following generation of IFAMs than following generation of AMs. There was no reliable effect of load on memory generation times; however, IFAMs always took longer to construct than AMs. Finally, replicating previous findings, fewer IFAMs had a field perspective than AMs, IFAMs were less vivid than AMs, and IFAMs contained more motion words (indicative of increased cognitive load). Taken together, these findings show a pattern of systematic differences that mark out IFAMs, and they also show that IFAMs can be identified indirectly by lowered performance on concurrent tasks that increase cognitive load.

  9. NCSX Vacuum Vessel Fabrication

    Viola ME; Brown T; Heitzenroeder P; Malinowski F; Reiersen W; Sutton L; Goranson P; Nelson B; Cole M; Manuel M; McCorkle D.

    2005-01-01

    The National Compact Stellarator Experiment (NCSX) is being constructed at the Princeton Plasma Physics Laboratory (PPPL) in conjunction with the Oak Ridge National Laboratory (ORNL). The goal of this experiment is to develop a device which has the steady state properties of a traditional stellarator along with the high performance characteristics of a tokamak. A key element of this device is its highly shaped Inconel 625 vacuum vessel. This paper describes the manufacturing of the vessel. The vessel is being fabricated by Major Tool and Machine, Inc. (MTM) in three identical 120 o vessel segments, corresponding to the three NCSX field periods, in order to accommodate assembly of the device. The port extensions are welded on, leak checked, cut off within 1-inch of the vessel surface at MTM and then reattached at PPPL, to accommodate assembly of the close-fitting modular coils that surround the vessel. The 120 o vessel segments are formed by welding two 60 o segments together. Each 60 o segment is fabricated by welding ten press-formed panels together over a collapsible welding fixture which is needed to precisely position the panels. The vessel is joined at assembly by welding via custom machined 8-inch (20.3 cm) wide spacer ''spool pieces''. The vessel must have a total leak rate less than 5 X 10 -6 t-l/s, magnetic permeability less than 1.02(micro), and its contours must be within 0.188-inch (4.76 mm). It is scheduled for completion in January 2006

  10. Un estudio sobre el rendimiento universitario

    Albaladejo Pina, I. P.

    1999-01-01

    Full Text Available El objetivo del presente trabajo es contrastar los rendimientos académicos de alumnos de dos cursos de la Facultad de Ciencias Económicas y Empresariales de la Universidad de Murcia, uno con el antiguo plan de estudios y otro con el actualmente en vigor. Analizamos el éxito y el fracaso para los estudiantes de cada uno de estos cursos, así como las variables socioeconómicas y educacionales que pueden influir en su rendimiento. Comprobamos, mediante unas estimaciones logit, que tanto unas como otras variables son factores condicionantes de este rendimiento. En particular, destacamos la influencia de haber cursado la opción C de COU en cuanto a fracasar o no en su primer curso universitario.

  11. Fabrication of superhydrophobic cotton fabrics using crosslinking polymerization method

    Jiang, Bin; Chen, Zhenxing; Sun, Yongli; Yang, Huawei; Zhang, Hongjie; Dou, Haozhen; Zhang, Luhong

    2018-05-01

    With the aim of removing and recycling oil and organic solvent from water, a facile and low-cost crosslinking polymerization method was first applied on surface modification of cotton fabrics for water/oil separation. Micro-nano hierarchical rough structure was constructed by triethylenetetramine (TETA) and trimesoyl chloride (TMC) that formed a polymeric layer on the surface of the fabric and anchored Al2O3 nanoparticles firmly between the fabric surface and the polymer layer. Superhydrophobic property was further obtained through self-assembly grafting of hydrophobic groups on the rough surface. The as-prepared cotton fabric exhibited superoleophilicity in atmosphere and superhydrophobicity both in atmosphere and under oil with the water contact angle of 153° and 152° respectively. Water/oil separation test showed that the as-prepared cotton fabric can handle with various oil-water mixtures with a high separation efficiency over 99%. More importantly, the separation efficiency remained above 98% over 20 cycles of reusing without losing its superhydrophobicity which demonstrated excellent reusability in oil/water separation process. Moreover, the as-prepared cotton fabric possessed good contamination resistance ability and self-cleaning property. Simulation washing process test showed the superhydrophobic cotton fabric maintained high value of water contact angle above 150° after 100 times washing, indicating great stability and durability. In summary, this work provides a brand-new way to surface modification of cotton fabric and makes it a promising candidate material for oil/water separation.

  12. Estudio sobre encofrados de madera modernos

    de la Peña Aznar, Juan M.

    1980-12-01

    Full Text Available The author continues the development of the subject «Modern Timber Formwork», by summing up the comparative examination —already carried out in Part III of this Study— of the different types of glued timber existing on the market. In addition, the loads and stresses allovk/able for coniferous timber and the proposal for establishing Regulations for the Timber Section of the Research and Experimental Forestry Institute of Spain are given. In part V of the author's Study, published in this article, the important subject of the glues used for joining timber, a truly vital point in order to obtain louvered timber beams which are simply glued together, is approached.

    El autor continúa el desarrollo del tema sobre «Encofrados de madera modernos», resumiendo el estudio comparativo —ya hecho en la Parte III de este Estudio— de las diferentes vigas de madera encolada existentes en el mercado dando, además, las cargas y tensiones admisibles para maderas coníferas y la propuesta de Reglamentación de la Sección de Maderas del Instituto Forestal de Investigaciones y Experiencias de España. En la parte V del Estudio del autor, publicada en este artículo, se aborda el importante tema de las colas empleadas para las uniones de madera, algo realmente vital para la obtención de vigas de madera en celosía simplemente encoladas.

  13. La auditoria sociolaboral y los estudios de relaciones laborales

    Benito Bermejo, José Luis

    2016-01-01

    Se analizan los estudios de Relaciones Laborales en relación al perfil profesional de auditor sociolaboral, haciendo un repaso de la historia de ambos, así como comparando la titulación con otras titulaciones. Se concluye con una propuesta de futuro para los estudios de Relaciones Laborales. Grado en Relaciones Laborales y Recursos Humanos (Segovia)

  14. Estudios sobre postmodernidad y estudios culturales: ¿sinónimos?

    Dr. Roberto A. Follari

    2000-01-01

    Full Text Available La postmodernidad exige para ser comprendida una dimensión sociohistórica y otra filosófica que le resulta irrenunciables. También hay una serie de fenómenos propiamente culturales, que son los que los denominados "estudios culturales" (G. Canclini. M. Barbero, etc. han asumido en Latinoamérica. Tales estudios han aportado una descripción de fenómenos nuevos, que no son analizados por ningún otro discurso teórico (tribus urbanas, identidades lábiles, influencia de los medios en los nuevos estilos de consumo, etc.. Con ello se da cuenta de parte de la cuestión postmodernidad, pero sin dudase deja fuera otras: lo filosófico y aún lo social y lo político quedan fuera de esa especie de antropología del presente. Por lo tanto, un enfoque integral de lo postmoderno incluye los estudios culturales, pero está lejos de limitarse a ellos.

  15. Escala de Metas de Estudio para Estudiantes Universitarios

    María Victoria Pérez Villalobos

    2009-01-01

    Full Text Available Actualmente disponemos de gran cantidad de trabajos que muestran la implicación de las metas de estudio en la motivación por estudiar y aprender. Este trabajo analiza la motivación académica y, especialmente, la variable "metas de estudio". El principal propósito de esta investigación es conocer las características psicométricas de la adaptación de la Escala de Metas de Estudio a la población universitaria chilena. Los participantes son 542 estudiantes chilenos, de distintas facultades universitarias. Los resultados del análisis factorial y de consistencia interna son aceptables en las tres subescalas. Estos resultados fundamentan el uso de la Escala de Metas de Estudio para evaluar la motivación al estudio de alumnas y alumnos universitarios en Chile (CL.

  16. Process for fabrication of cermets

    Landingham, Richard L [Livermore, CA

    2011-02-01

    Cermet comprising ceramic and metal components and a molten metal infiltration method and process for fabrication thereof. The light weight cermets having improved porosity, strength, durability, toughness, elasticity fabricated from presintered ceramic powder infiltrated with a molten metal or metal alloy. Alumina titanium cermets biocompatible with the human body suitable for bone and joint replacements.

  17. CW RFQ fabrication and engineering

    Schrage, D.; Young, L.; Roybal, P.

    1998-01-01

    The design and fabrication of a four-vane RFQ to deliver a 100 mA CW proton beam at 6.7 MeV is described. This linac is an Oxygen-Free Electrolytic (OFE) copper structure 8 m in length and was fabricated using hydrogen furnace brazing as the joining technology

  18. DRAPING SIMULATION OF WOVEN FABRICS

    Rodgers, William [General Motors LLC; Jin, Xiaoshi [ESI Group NA; Zhu, Jiang [Optimal CAE; Wathen, Terrence [General Motors LLC; Doroudian2, Mark [ESI Group NA; Aitharaju, Venkat [General Motors LLC

    2016-09-07

    Woven fabric composites are extensively used in molding complex geometrical shapes due to their high conformability compared to other fabrics. Preforming is an important step in the overall process, where the two-dimensional fabric is draped to become the three-dimensional shape of the part prior to resin injection. During preforming, the orientation of the yarns may change significantly compared to the initial orientations. Accurate prediction of the yarn orientations after molding is important for evaluating the structural performance of the final part. This paper presents a systematic investigation of the angle changes during the preform operation for carbon fiber twill and satin weave fabrics. Preforming experiments were conducted using a truncated pyramid mold geometry designed and fabricated at the General Motors Research Laboratories. Predicted results for the yarn orientations were compared with experimental results and good agreement was observed

  19. Secure Automated Fabrication: an overview of remote breeder fuel fabrication

    Nyman, D.H.; Graham, R.A.

    1983-10-01

    The Secure Automated Fabrication (SAF) line is an automated, remotely controlled breeder fuel pin fabrication process which is to be installed in the Fuels and Materials Examination Facility (FMEF). The FMEF is presently under construction at Hanford and is scheduled for completion in 1984. The SAF line is scheduled for startup in 1987 and will produce mixed uranium-plutonium fuel pins for the Fast Flux Test Facility (FFTF) and the Clinch River Breeder Reactor Plant (CRBRP). The fabrication line and support systems are described

  20. PARATIROIDECTOMIA ENDOSCOPICA. ESTUDIO EXPERIMENTAL EN EL PERRO

    Jorge Ramón Lucena Olavarrieta

    2008-01-01

    Full Text Available La primera paratiroidectomía exitosa fue realizada en Viena, Austria, en 1925. Los procedimientos laparoscópicos estuvieron inicialmente limitadas a las zonas corporales con cavidades preexistentes, recientemente, el acceso a espacios anatómicos potenciales ha extendido las indicaciones de la cirugía endoscópica minimamnete invasiva.Desde el primer reporte sobre la paratiroidectomía endoscópica en 1996, las técnicas video-asistidas han comenzado a utilizarse en la cirugía del cuello, y en varias series se han documentado la factibilidad y seguridad de este tipo de abordaje. La finalidad de esta investigación fue el determinar la factibilidad, seguridad y eficacia de la paratiroidectomía endoscopia en el modelo canino.Entre el 25 de noviembre del 2005 y 15 de octubre del 2007, se intervinieron en el Instituto de Cirugía Experimental de la Universidad Central de Venezuela 31 perros, mestizos sanos desparasitados,asignándose a dos grupos: homogéneos "A" 16, a cirugía convencional, "B" 15 a cirugía video-asistida. Se midieron las siguientes variables; sexo, peso, exámenes de laboratorio, laringoscopia pre y postoperatoria, posición, dirección de la incisión, longitud, localización, valores pre y postoperatorios de calcio, fósforo, proteína C reactiva, hemoglobina, hematocrito, tipo de disección, número y posición de las paratiroides, identificación de los nervios recurrentes y rama externa del nervio laríngeo superior, sangramiento, dificultades intraoperatorias, tiempo, resultado del estudio histopatológico.Las deducciones de este estudio experimental proporcionan evidencias de que la paratiroidectomía endoscópica es factible y segura. El abordaje mínimo tiene mejores resultados cosméticos y el potencial de disminuir la morbi-mortalidad.

  1. MOX fuel fabrication at AECL

    Dimayuga, F.C.; Jeffs, A.T.

    1995-01-01

    Atomic Energy of Canada Limited's mixed-oxide (MOX) fuel fabrication activities are conducted in the Recycle Fuel Fabrication Laboratories (RFFL) at the Chalk River Laboratories. The RFFL facility is designed to produce experimental quantities of CANDU MOX fuel for reactor physics tests or demonstration irradiations. From 1979 to 1987, several MOX fuel fabrication campaigns were run in the RFFL, producing various quantities of fuel with different compositions. About 150 bundles, containing over three tonnes of MOX, were fabricated in the RFFL before operations in the facility were suspended. In late 1987, the RFFL was placed in a state of active standby, a condition where no fuel fabrication activities are conducted, but the monitoring and ventilation systems in the facility are maintained. Currently, a project to rehabilitate the RFFL and resume MOX fuel fabrication is nearing completion. This project is funded by the CANDU Owners' Group (COG). The initial fabrication campaign will consist of the production of thirty-eight 37-element (U,Pu)O 2 bundles containing 0.2 wt% Pu in Heavy Element (H.E.) destined for physics tests in the zero-power ZED-2 reactor. An overview of the Rehabilitation Project will be given. (author)

  2. Estudio de estabilidad de tabletas de propiltiouracilo 50 mg

    María Olga Valdés Bendoyro

    Full Text Available Se desarrolló el estudio de estabilidad de las tabletas de propiltiouracilo 50 mg y se determinó su fecha de vencimiento. Este estudio se realizó por los métodos de vida de estante y de estabilidad acelerada mediante cromatografía líquida de alta eficiencia, validados en el Centro de Investigación y Desarrollo de Medicamentos. El estudio de vida de estante se desarrolló por un periodo de 24 meses a temperatura ambiente; mientras que el estudio de estabilidad acelerada se efectuó sometiendo el producto a la influencia de la luz, la humedad y la temperatura; se realizó el análisis durante 3 meses, para los 2 primeros y durante 6 meses para el estudio de la temperatura. La formulación de propiltiouracilo tabletas 50 mg cumplió con las especificaciones de calidad descritas en la farmacopea. Los resultados del estudio de estabilidad por vida de estante después de transcurridos los 24 meses indicaron que el producto mantenía los parámetros que determinan su calidad durante ese tiempo, y en los estudios acelerados no se observó degradación significativa del producto. Se estableció 2 años como fecha de vencimiento en las condiciones señaladas.

  3. Fabric circuits and method of manufacturing fabric circuits

    Chu, Andrew W. (Inventor); Dobbins, Justin A. (Inventor); Scully, Robert C. (Inventor); Trevino, Robert C. (Inventor); Lin, Greg Y. (Inventor); Fink, Patrick W. (Inventor)

    2011-01-01

    A flexible, fabric-based circuit comprises a non-conductive flexible layer of fabric and a conductive flexible layer of fabric adjacent thereto. A non-conductive thread, an adhesive, and/or other means may be used for attaching the conductive layer to the non-conductive layer. In some embodiments, the layers are attached by a computer-driven embroidery machine at pre-determined portions or locations in accordance with a pre-determined attachment layout before automated cutting. In some other embodiments, an automated milling machine or a computer-driven laser using a pre-designed circuit trace as a template cuts the conductive layer so as to separate an undesired portion of the conductive layer from a desired portion of the conductive layer. Additional layers of conductive fabric may be attached in some embodiments to form a multi-layer construct.

  4. Fabrication of cotton fabric with superhydrophobicity and flame retardancy.

    Zhang, Ming; Wang, Chengyu

    2013-07-25

    A simple and facile method for fabricating the cotton fabric with superhydrophobicity and flame retardancy is described in the present work. The cotton fabric with the maximal WCA of 160° has been prepared by the covalent deposition of amino-silica nanospheres and the further graft with (heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane. The geometric microstructure of silica spheres was measured by transmission electron microscopy (TEM). The cotton textiles before and after treatment were characterized by using scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The wetting behavior of cotton samples was investigated by water contact angle measurement. Moreover, diverse performances of superhydrophobic cotton textiles have been evaluated as well. The results exhibited the outstanding superhydrophobicity, excellent waterproofing durability and flame retardancy of the cotton fabric after treatment, offering a good opportunity to accelerate the large-scale production of superhydrophobic textiles materials for new industrial applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. planes de estudio y orientaciones oficiales

    María Eugenia Fernández Fraile

    2005-01-01

    Full Text Available El presente artículo se propone, a través del análisis de los cambios introducidos en los Planes de estudios que más incidencia tienen sobre la enseñanza de las lenguas vivas (1900, 1926, 1934, 1938, 1953/1957, 1970 y 1990, destacar las tendencias evolutivas o las líneas maestras que configuran el concepto del Francés como Lengua Extranjera en tanto que disciplina escolar Se abordan así, en una presentación cronológica, las siguientes cuestiones: la regulación de la materia en sus aspectos “materiales” (horario, cursos, el concepto “social” e “institucional” de la disciplina (en conexión con el resto de las lenguas vivas y, finalmente, los objetivos-contenidos didácticos y las orientaciones metodológicas presentes en los textos oficiales.

  6. Estudio comparativo de la cultura organizacional

    Góngora, Norberto H.

    2014-12-01

    Full Text Available El presente trabajo da a conocer resultados parciales de la investigación realizada en el marco del proyecto acreditado “Estudio de las Culturas Organizacionales como determinantes de las personas que trabajan en ellas”, cuyo objetivo general es corroborar las características de cada tipo cultural descriptas en la teoría.Los datos que se exponen son el resultado de varios proyectos de investigación desarrollados utilizando la misma metodología. Se ha obtenido gran cantidad de información para analizar variables asociadas al análisis de la cultura organizacional y así, clasificar cada caso en un tipo cultural. Luego, a partir de la base de datos obtenida se han comparado los datos con las características que describe la teoría, a fin de verificarlos o ponerlos en discusión.La conclusión más importante es que la cultura incide en múltiples aspectos de las conductas de las personas y muchos fenómenos, entre ellos los estudiados en este trabajo, así lo demuestran. Es fundamental estudiar este aspecto de las organizaciones en profundidad y no sólo clasificarlas en uno u otro tipo cultural, ya que existen relaciones entre variables que brindan mayor información que resulta relevante para comprender el comportamiento de las personas.

  7. Un estudio de resentimiento en ancianos institucionalizados

    Dante Gazzolo D.

    1987-06-01

    Full Text Available El presente estudio es una investigación realizada por los Servicios de Psicología del Instituto Nacional de Salud Mental "Honorio Delgado - Hideyo Noguchi", y del Hogar "lgnacia Rodulfa V da. de Canevaro", a través del cual se intenta un acercamiento al devenir psicológico del anciano institucionalizado. Este, al residir permanentemente al interior de un asilo, manifiesta sentimientos de frustración, fracaso y resentimiento, entre otros. Se intenta determinar el grado de: resentimiento que se hace presente en ancianos institucionalizados, tomando en cuenta variables diferenciadoras como condición de vivienda (nivel socio-económico, sexo, edad, estado civil, grado de instrucción, actividad laboral, presencia  o ausencia de hijos, y tiempo de residencia en el asilo.Para tal fin, se evaluó a una muestra de 53  ancianos, 32 mujeres y 21 hombres, 18 de nivel socio-económico alto, y 35 de nivel socio-económico bajo, a través de un Inventario de Actitudes hacia la Vida, encontrando que los sujetos de nivel socio-económico bajo presentan mayores grados de resentimiento que los sujetos de nivel socio-económico alto, observándose, de otro lado, mayores niveles de resentimiento en el sexo masculino que en el femenino.

  8. Anorexia nervosa: un estudio de casos

    Lillyana Zusman Tinman

    2013-09-01

    Full Text Available La Anorexia Nervosa es un trastorno de alimentación que se define (etimológicamente como una "pérdida nerviosa del apetito". Se caracteriza por la actitud consciente, voluntaria y rotunda de los sujetos  de tener un exceso de peso que intentan modificar por vía de la inanición. A partir del estudio de casos, se propone la distinción entre una Anorexia Nervosa Estructural -aquella en la que predomina el conflicto intrapsíquico primario y arcaico, y que manifiesta una conducta aislada y retraída- y una Anorexia Nervosa Reactiva, aquella en la que predomina un conflicto intrafamiliar algo más posterior y, por lo tanto, una personalidad más abierta y compatible con el medio. Anorexia Nervosa is an Eating Disorder defined (etimoligacally as a "nervouse loss of apetite". It is characterized by a conscious, voluntary and categoric attitude of the sick patient to refrain from eating. He/she has a firm conviction of having excess weight which they try to modify by starvation. Through a case study, a distinction between two types of Anorexia Nervosa is proposed: a Structural Anorexia Nervosa -in which an intrapsyhic, primary, arcaic conflic prevails, leading to an isolated, withdrawal conduct- and a Reactive Anorexia Nervosa, in which a later intrafamilial conflict prevails leading, therefore, to a more open personality, compatible with the enviroment.

  9. Estudio electrofisiologico en la neuropatia por Vincristina

    Olga P. Sanz

    1975-12-01

    Full Text Available Diez pacientes afectados por diversas patologías que requerían tratamiento crónico con Vincristina, fueron sometidos a estudios electrofisiológicos en los que se valoró: el número de unidades motoras (UM funcionantes en los músculos de la eminencia tenar, los valores de los incrementos medios de UM, velocidad de conducción motora y su latencia residual en el nervio mediano, la velocidad de conducción sensitiva del mismo nervio y el estado de la transmisión neuromuscular. Los valores obtenidos fueron comparados con grupos controles. Los resultados mostraron disminución del número de UM; las UM remanentes presentaron amplitud reducida junto a otras cuyo tamaño no superaba el del grupo control, hecho que sugiere la incapacidad de lograr una reinervación adecuada. Las velocidades de conducción motora y sensitiva mostraron valores diminuídos, con mayor compromiso en los segmentos distales. Junto a estos datos se halló respuesta miasteniforme al estímulo repetitivo. Todos estos resultados permiten postular la existencia de un compromiso de la unidad motora, abarcando todos sus segmentos, en pacientes intoxicados con Vincristina.

  10. ESTUDIOS CURRICULARES Y LA HISTORIA DEL PRESENTE

    Thomas S. Popkewitz

    2010-01-01

    Full Text Available El campo de la historia del currículum, así como más ampliamente el de la historia de la educación, está organizado por tradiciones de historia intelectual y social; antes más preocupado por la organización y el cambio en las ideas; más recientemente con las ideas como representación institucional y cambios sociales encontrados en la política y en los actuales desarrollos programáticos. Este artículo formula una perspectiva sobre el currículum como una historia del presente. Se considera el currículum como "ordenanzas de conversión" pensando el currículum como narrativas de pertenencia nacional y ciencia emparejada con temas de salvación que generan tesis culturales sobre modos de vida. La sección segunda habla de la Educación Americana Progresiva en un reformismo protestante que, cruzado el Atlántico, se preocupa por la cuestión social. La sección final explora las tesis culturales generadas en la formación de las matemáticas, el alfabetismo, y el plan de estudios de música.

  11. Fabrication of nanowires and nanostructures

    Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.; Piraux, L.

    2009-01-01

    We report on different approaches that we have adopted and developed for the fabrication of nanowires and nanostructures. Methods based on template synthesis and on self organization seem to be the most promising for the fabrication of nanomaterials and nanostructures due to their easiness and low...... cost. The development of a supported nanoporous alumina template and the possibility of using this template to combine electrochemical synthesis with lithographic methods open new ways for the fabrication of complex nanostructures. The numerous advantages of the supported template and its compatibility...

  12. Quantum Bridge Fabrication Using Photolithography

    Quinones, R.

    2001-01-01

    The need for high-speed performance electronics in computers integrated circuits and sensors, require the fabrication of low energy consumption diodes. Nano fabrication methods require new techniques and equipment. We are currently developing a procedure to fabricate a diode based on quantum-effects. The device will act like a traditional diode, but the nanometer scale will allow it to reach high speeds without over heating. This new diode will be on a nano-bridge so it can be attenuated by an electromagnetic wave. The goal is to obtain similar current vs voltage response as in a silicon diode

  13. Fabricating Copper Nanotubes by Electrodeposition

    Yang, E. H.; Ramsey, Christopher; Bae, Youngsam; Choi, Daniel

    2009-01-01

    Copper tubes having diameters between about 100 and about 200 nm have been fabricated by electrodeposition of copper into the pores of alumina nanopore membranes. Copper nanotubes are under consideration as alternatives to copper nanorods and nanowires for applications involving thermal and/or electrical contacts, wherein the greater specific areas of nanotubes could afford lower effective thermal and/or electrical resistivities. Heretofore, copper nanorods and nanowires have been fabricated by a combination of electrodeposition and a conventional expensive lithographic process. The present electrodeposition-based process for fabricating copper nanotubes costs less and enables production of copper nanotubes at greater rate.

  14. Estudio de caso. Comunicación Corporativa en empresas chilenas.

    Dino Villegas

    2007-12-01

    Full Text Available La comunicación en Chile aparece con más ingerencia en el diseño y desarrollo de la estrategia corporativa. En las empresas existe participación de los directores de la comunicación en la mesa directiva, pero falta mayor presencia. Se ha privilegiado a los ingenieros, dejando fuera el aporte de los profesionales de la comunicación. La comunicación corporativa se ha abierto espacio en el diseño de las estrategias empresariales. La comprensión de las organizaciones como grandes gestores de vínculos e interacciones simbólicas, así como los aportes de la nueva Teoría Estratégica, se ha encaminado en esta ruta. Los profesionales, investigadores y Facultades de Comunicación tienen el gran desafío de concretar estos aportes en las empresas.

  15. Natural fabric of Hildegardia populifolia composites

    Guduri, BBR

    2006-12-01

    Full Text Available The influence of Hildegardia populofolia fabric content, fabric orientation, sodium hydroxide (NaOH) and silane coupling agent treatment on the surface properties of the fabric, mechanical and fracture properties of Hildegardia populifolia...

  16. Properties of natural fabric Polyalthia cerasoides

    Jayaramudu, J

    2009-06-01

    Full Text Available of this fabric were compared with those of two natural fabrics reported in the literature. This uniaxial fabric has sufficient tensile modulus and can be used as reinforcement in the development of green composites....

  17. Los estudios culturales en Centroamérica.

    Fumero, Patricia

    2012-01-01

    En el presente artículo se considerará el inicio de los estudios culturales en Centroamérica y las diversas corrientes que influyeron en este cambio. Posteriormente, se analizará la problemática que supone el estudio del istmo, en términos de su diversidad y del desarrollo de adecuadas perspectivas comparativas. Por último, se revisarán los avances logrados por los estudios literarios y los desafíos planteados en el futuro inmediato.

  18. Recursos bibliográgicos sobre los estudios en italiano

    Caprara, Giovanni

    2009-01-01

    Este artículo bibliográfico busca ofrecer una visión panorámica actualizada (y representativa) de los Estudios de Traducción en lengua italiana. En ella se clasifican por temas objeto de estudio toda una serie de obras (libros, monografías colectivas, etc.) que inciden sobre el estudio de la Traducción e Interpretación desde la perspectiva de la lengua y la cultura italianas o que, aunque hayan sido realizados por autores extranjeros, su publicación utiliza como lengua vehicular de comunic...

  19. Estudio comparativo entre SIG propietario y SIG libre

    Mesa Díaz, Juan Ramón

    2008-01-01

    Estudio comparativo entre SIG propietario y SIG libre, focalizado en los casos particulares de Geomedia Pro (SIG Propietario) y gvSIG (SIG Libre). En el estudio se procede a determinar cuáles son los aspectos destacables de un SIG, para poder evaluarlos, posteriormente, en los dos SIG objeto del estudio y obtener una ponderación definitoria de cada SIG. A continuación, algunos de los aspectos evaluados en cada SIG: interoperabilidad, conexión a bases de datos espaciales, aspectos económ...

  20. Fabrication of integrated metallic MEMS devices

    Yalcinkaya, Arda Deniz; Ravnkilde, Jan Tue; Hansen, Ole

    2002-01-01

    A simple and complementary metal oxide semiconductor (CMOS) compatible fabrication technique for microelectromechanical (MEMS) devices is presented. The fabrication technology makes use of electroplated metal layers. Among the fabricated devices, high quality factor microresonators are characteri......A simple and complementary metal oxide semiconductor (CMOS) compatible fabrication technique for microelectromechanical (MEMS) devices is presented. The fabrication technology makes use of electroplated metal layers. Among the fabricated devices, high quality factor microresonators...

  1. Pilling Resistance of Knitted Fabrics

    Gita BUSILIENĖ

    2011-09-01

    Full Text Available Knitted fabrics with different quantity of elastane, conspicuous by high viscosity and elasticity, having one of the most important performance properties - resistance to pilling are often used in the production of high quality sportswear. During technological process imitating operating conditions, the behaviour of knitted fabrics may be changed by different industrial softeners from 12 % to 20 % of active substance, for example fatty acid condensate (Tubingal 5051 or silicone micro emulsion (Tubingal SMF. The aim of this investigation is to define the influence of fibrous composition and chemical softeners to the propensity of fuzzing and pilling of plain and plated jersey pattern knitted fabrics. The results of investigations showed that fibrous composition and thickness of materials (up to 6 % and washing as well as softening (from 33 % to 67 % change the resistance of knitted fabrics to pilling.http://dx.doi.org/10.5755/j01.ms.17.3.597

  2. Geoacoustic Physical Model Fabrication Laboratory

    Federal Laboratory Consortium — FUNCTION: Fabricates three-dimensional rough surfaces (e.g., fractals, ripples) out of materials such as PVC or wax to simulate the roughness properties associated...

  3. Fabricating plasmonic components for nanophotonics

    Boltasseva, Alexandra; Nielsen, Rasmus Bundgaard; Jeppesen, Claus

    2009-01-01

    We report on experimental realization of different metal-dielectric structures that are used as surface plasmon polariton waveguides and as plasmonic metamaterials. Fabrication approaches based on different lithographic and deposition techniques are discussed....

  4. Silicone nanocomposite coatings for fabrics

    Eberts, Kenneth (Inventor); Lee, Stein S. (Inventor); Singhal, Amit (Inventor); Ou, Runqing (Inventor)

    2011-01-01

    A silicone based coating for fabrics utilizing dual nanocomposite fillers providing enhanced mechanical and thermal properties to the silicone base. The first filler includes nanoclusters of polydimethylsiloxane (PDMS) and a metal oxide and a second filler of exfoliated clay nanoparticles. The coating is particularly suitable for inflatable fabrics used in several space, military, and consumer applications, including airbags, parachutes, rafts, boat sails, and inflatable shelters.

  5. Safeguards through secure automated fabrication

    DeMerschman, A.W.; Carlson, R.L.

    1982-01-01

    Westinghouse Hanford Company, a prime contractor for the U.S. Department of Energy, is constructing the Secure Automated Fabrication (SAF) line for fabrication of mixed oxide breeder fuel pins. Fuel processing by automation, which provides a separation of personnel from fuel handling, will provide a means whereby advanced safeguards concepts will be introduced. Remote operations and the inter-tie between the process computer and the safeguards computer are discussed

  6. Implantes dentales en pacientes adultos postrauma dentoalveolar. Estudio descriptivo

    Edgardo González

    2016-04-01

    Conclusiones: En este estudio se presenta un protocolo establecido y se establece la necesidad de un diagnóstico detallado para planificar la rehabilitación mediante implantes dentales posterior a un trauma con un equipo multidisciplinario.

  7. El estudio de la cadena productiva del fique

    Maria Eugenia Morales Rubiano

    2002-09-01

    Full Text Available El estudio recopila los resultados más importantes obtenidos en el trabajo de grado denominado "Estudio de factibilidad de la cadena productiva del fique cultivado en Colombia", el cual tomo como punto de referencia el sector fiquero para estimas la factibilidad de aplicar un esquema de cadena productiva, a través de la estructura y análisis estratégico del sistema.

  8. ITER Central Solenoid Module Fabrication

    Smith, John [General Atomics, San Diego, CA (United States)

    2016-09-23

    The fabrication of the modules for the ITER Central Solenoid (CS) has started in a dedicated production facility located in Poway, California, USA. The necessary tools have been designed, built, installed, and tested in the facility to enable the start of production. The current schedule has first module fabrication completed in 2017, followed by testing and subsequent shipment to ITER. The Central Solenoid is a key component of the ITER tokamak providing the inductive voltage to initiate and sustain the plasma current and to position and shape the plasma. The design of the CS has been a collaborative effort between the US ITER Project Office (US ITER), the international ITER Organization (IO) and General Atomics (GA). GA’s responsibility includes: completing the fabrication design, developing and qualifying the fabrication processes and tools, and then completing the fabrication of the seven 110 tonne CS modules. The modules will be shipped separately to the ITER site, and then stacked and aligned in the Assembly Hall prior to insertion in the core of the ITER tokamak. A dedicated facility in Poway, California, USA has been established by GA to complete the fabrication of the seven modules. Infrastructure improvements included thick reinforced concrete floors, a diesel generator for backup power, along with, cranes for moving the tooling within the facility. The fabrication process for a single module requires approximately 22 months followed by five months of testing, which includes preliminary electrical testing followed by high current (48.5 kA) tests at 4.7K. The production of the seven modules is completed in a parallel fashion through ten process stations. The process stations have been designed and built with most stations having completed testing and qualification for carrying out the required fabrication processes. The final qualification step for each process station is achieved by the successful production of a prototype coil. Fabrication of the first

  9. A facile method to fabricate superhydrophobic cotton fabrics

    Zhang, Ming; Wang, Shuliang; Wang, Chengyu; Li, Jian

    2012-11-01

    A facile and novel method for fabricating superhydrophobic cotton fabrics is described in the present work. The superhydrophobic surface has been prepared by utilizing cationic poly (dimethyldiallylammonium chloride) and silica particles together with subsequent modification of (heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane. The size distribution of silica particles was measured by Particle Size Analyzer. The cotton textiles before and after treatment were characterized by using scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The wetting behavior of cotton samples was investigated by water contact angle measurement. Moreover, the superhydrophobic durability of coated cotton textiles has been evaluated by exposure, immersion and washing tests. The results show that the treated cotton fabrics exhibited excellent chemical stability and outstanding non-wettability with the WCA of 155 ± 2°, which offers an opportunity to accelerate the large-scale production of superhydrophobic textiles materials for new industrial applications.

  10. Fabrication of Nanoimprint stamps for photonic crystals

    Kouba, J; Kubenz, M; Mai, A; Ropers, G; Eberhardt, W; Loechel, B

    2006-01-01

    We report on fabrication of nanoimprint stamps for fabrication of two dimensional photonic crystals in visible range of spectra. Nanoimprint stamps made of silicon and/or nickel were successfully fabricated using electron beam lithography and advanced dry etching techniques. The quality of the stamps was evaluated using scanning electron microscopy. The fabricated stamps were also evaluated by imprinting them into suitable polymer materials

  11. 14 CFR 23.605 - Fabrication methods.

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fabrication methods. 23.605 Section 23.605... Fabrication methods. (a) The methods of fabrication used must produce consistently sound structures. If a... fabrication method must be substantiated by a test program. [Doc. No. 4080, 29 FR 17955, Dec. 18, 1964; 30 FR...

  12. 14 CFR 29.605 - Fabrication methods.

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fabrication methods. 29.605 Section 29.605... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.605 Fabrication methods. (a) The methods of fabrication used must produce consistently sound structures. If a fabrication process...

  13. 14 CFR 27.605 - Fabrication methods.

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fabrication methods. 27.605 Section 27.605... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.605 Fabrication methods. (a) The methods of fabrication used must produce consistently sound structures. If a fabrication process (such as...

  14. 14 CFR 25.605 - Fabrication methods.

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fabrication methods. 25.605 Section 25.605... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.605 Fabrication methods. (a) The methods of fabrication used must produce a consistently sound structure. If a fabrication process...

  15. Metallic Reactor Fuel Fabrication for SFR

    Song, Hoon; Kim, Jong-Hwan; Ko, Young-Mo; Woo, Yoon-Myung; Kim, Ki-Hwan; Lee, Chan-Bock [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    The metal fuel for an SFR has such advantages such as simple fabrication procedures, good neutron economy, high thermal conductivity, excellent compatibility with a Na coolant, and inherent passive safety 1. U-Zr metal fuel for SFR is now being developed by KAERI as a national R and D program of Korea. The fabrication technology of metal fuel for SFR has been under development in Korea as a national nuclear R and D program since 2007. The fabrication process for SFR fuel is composed of (1) fuel slug casting, (2) loading and fabrication of the fuel rods, and (3) fabrication of the final fuel assemblies. Fuel slug casting is the dominant source of fuel losses and recycled streams in this fabrication process. Fabrication on the rod type metallic fuel was carried out for the purpose of establishing a practical fabrication method. Rod-type fuel slugs were fabricated by injection casting. Metallic fuel slugs fabricated showed a general appearance was smooth.

  16. ESTUDIOS DE CASOS Y CONTROLES: A PROPÓSITO DE DOS ESTUDIOS EN CIMEL

    Francisco Javier Bonilla-Escobar

    2013-08-01

    Full Text Available Los estudios de casos y controles han existido desde el siglo XIX con el analisis de Jhon Snow en Inglaterra sobre la fuente del Colera, y han tomado inusitada importancia despues de su puesta en marcha en diversos campos de la ciencia moderna (1, siendo objeto de amplias discusiones metodologicas hace mas de 50 anos. En los dos numeros anteriores de la revista CIMEL, se encuentran dos de estas publicaciones, tituladas: Factores asociados al Sindrome de Aspiracion Meconial en el hospital Jose Cayetano Heredia Piura-Peru, de Purizaca y col. (2, y Factores asociados al desarrollo de preeclampsia en un hospital de Piura, Peru, de Benites-Condor y col. (3. Reconociendo la importancia de este tipo de publicaciones y el trabajo requerido para su elaboracion, queremos mencionar aciertos y falencias metodologicas que hemos encontrado en estas publicaciones y las cuales afectan las afirmaciones de los autores

  17. Los estudios sobre paisaje en Estudios Geográficos (1940-2009

    Arroyo Ilera, Fernando

    2010-12-01

    Full Text Available Not available.Los doscientos sesenta y nueve números editados de esta revista son un excelente banco de pruebas donde observar la evolución y los cambios experimentados por la Geografía española, en los últimos setenta años en los que Estudios Geográficos (EG se viene publicando ininterrumpidamente. La sucesión de temas, su tratamiento y enfoque, las citas bibliográficas, etc., constituyen una excelente referencia de gran interés para cualquier ciencia y, en especial para la nuestra, que ya en otras ocasiones ha sido utilizada para valorar la evolución metodológica de la Geografía.

  18. Electromagnetic micropores: fabrication and operation.

    Basore, Joseph R; Lavrik, Nickolay V; Baker, Lane A

    2010-12-21

    We describe the fabrication and characterization of electromagnetic micropores. These devices consist of a micropore encompassed by a microelectromagnetic trap. Fabrication of the device involves multiple photolithographic steps, combined with deep reactive ion etching and subsequent insulation steps. When immersed in an electrolyte solution, application of a constant potential across the micropore results in an ionic current. Energizing the electromagnetic trap surrounding the micropore produces regions of high magnetic field gradients in the vicinity of the micropore that can direct motion of a ferrofluid onto or off of the micropore. This results in dynamic gating of the ion current through the micropore structure. In this report, we detail fabrication and characterize the electrical and ionic properties of the prepared electromagnetic micropores.

  19. Integrated Fabrication of a Microgripper

    1999-01-01

    Successful implementation of simple mechanism on silicon chip is a prerequisite for monolithic microrobot-ic systems. This paper describes the integrated fabrication of polycrystalline silicon microgripper. Link, fixed andactive joint, and sliding flange structures with dimensions of micrometers have been fabricated on the substrate ofmonocrystalline silicon using silicon microfabrication technology. This microgripper, which may be applied to trans-ducers or sensors, can be batch-fabricated in IC-compatible process. The movable mechanical elements are built onlayers that are later removed, so that they are free for translation and rotation. Under external driving, a microgrip-per cut from substrate would be able to catch tiny filament or small particle with dimension of 10~ 200 micrometers.

  20. Cascade reactor: granule fabrication processes

    Erlandson, O.D.; Winkler, E.O.; Maya, I.; Pitts, J.H.

    1985-01-01

    A key feature of Cascade is the granular blanket. Of the many blanket material options open to Cascade, fabrication of Li 2 O granules was felt to offer the greatest challenge. The authors explored available methods for initial Li 2 O granule fabrication. They identified three cost-effective processes for fabricating Li 2 O granules: the VSM drop-melt furnace process, which is based on melting and spheroidizing irregularly shaped Li 2 O feed granules; the LiOH process, which spheroidizes liquefied LiOH and uses GA Technologies' sphere-forming procedures; and the Li 2 CO 3 sol-gel process, used for making spherical fuel particles for the high-temperature gas-cooled reactor (HTGR). Each process is described below

  1. SRF Cavity Fabrication and Materials

    Singer, W

    2014-07-17

    The technological and metallurgical requirements of material for highgradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10μg/g. The hydrogen content should be kept below 2μg/g to prevent degradation of the Q-value under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Defects may be detected by quality control methods such as eddy current scanning and identified by a number of special methods. Conventional and alternative cavity fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and Electron-Beam Welding (EBW). The welding of half-cells is a delicate...

  2. Stirling Microregenerators Fabricated and Tested

    Moran, Matthew E.

    2004-01-01

    A mesoscale Stirling refrigerator patented by the NASA Glenn Research Center is currently under development. This refrigerator has a predicted efficiency of 30 percent of Carnot and potential uses in electronics, sensors, optical and radiofrequency systems, microarrays, and microsystems. The mesoscale Stirling refrigerator is most suited to volume-limited applications that require cooling below the ambient or sink temperature. Primary components of the planar device include two diaphragm actuators that replace the pistons found in traditional-scale Stirling machines and a microregenerator that stores and releases thermal energy to the working gas during the Stirling cycle. Diaphragms are used to eliminate frictional losses and bypass leakage concerns associated with pistons, while permitting reversal of the hot and cold sides of the device during operation to allow precise temperature control. Three candidate microregenerators were fabricated under NASA grants for initial evaluation: two constructed of porous ceramic, which were fabricated by Johns Hopkins Applied Physics Laboratory, and one made of multiple layers of nickel and photoresist, which was fabricated by Polar Thermal Technologies. The candidate regenerators are being tested by Johns Hopkins Applied Physics in a custom piezoelectric-actuated test apparatus designed to produce the Stirling refrigeration cycle. In parallel with the regenerator testing, Johns Hopkins is using deep reactive ion etching to fabricate electrostatically driven, comb-drive diaphragm actuators. These actuators will drive the Stirling cycle in the prototype device. The top photograph shows the porous ceramic microregenerators. Two microregenerators were fabricated with coarse pores and two with fine pores. The bottom photograph shows the test apparatus parts for evaluating the microregenerators, including the layered nickel-and-photoresist regenerator fabricated using LIGA techniques.

  3. Advanced fabrication of hyperbolic metamaterials

    Shkondin, Evgeniy; Sukham, Johneph; Panah, Mohammad Esmail Aryaee

    2017-01-01

    Hyperbolic metamaterials can provide unprecedented properties in accommodation of high-k (high wave vector) waves and enhancement of the optical density of states. To reach such performance the metamaterials have to be fabricated with as small imperfections as possible. Here we report on our...... advances in two approaches in fabrication of optical metamaterials. We deposit ultrathin ultrasmooth gold layers with the assistance of organic material (APTMS) adhesion layer. The technology supports the stacking of such layers in a multiperiod construction with alumina spacers between gold films, which...

  4. MQXFS1 Quadrupole Fabrication Report

    Ambrosio, G; Bossert, R; Cavanna, E; Cheng, D; Chlachidize, G; Cooley, L D; Dietderich, D; Felice, H; Ferracin, P; Ghosh, A; Hafalia, R; Holik, E F; Izquierdo Bermudez, S; Juchno, M; Krave, S; Marchevsky, M; Muratore, J; Nobrega, F; Pan, H; Perez, J C; Pong, I; Prestemon, S; Ravaioli, E; Sabbi, G L; Santini, C; Schmalzle, J; Schmalzle, J; Stoynev, S; Strauss, T; Vallone, G; Wanderer, P; Wang, X; Yu, M

    2017-01-01

    This report presents the fabrication and QC data of MQXFS1, the first short model of the low-beta quadrupoles (MQXF) for the LHC High Luminosity Upgrade. It describes the conductor, the coils, and the structure that make the MQXFS1 magnet. Qualification tests and non-conformities are also presented and discussed. The fabrication of MQXFS1 was started before the finalization of conductor and coil design for MQXF magnets. Two strand design were used (RRP 108/127 and RRP 132/169). Cable and coil cross-sections were “first generation”.

  5. MQXFS1 Quadrupole Fabrication Report

    Ambrosio, G. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Anerella, M. [Brookhaven National Lab. (BNL), Upton, NY (United States); Bossert, R. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Cavanna, E. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Cheng, D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chlachidize, G. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Cooley, L. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Dietderich, D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Felice, H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ferracin, P. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Ghosh, A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Hafalia, R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Holik, E. F. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Bermudez, S. Izquierdo [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Juchno, M. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Krave, S. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Marchevsky, M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Muratore, J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Nobrega, F. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Pan, H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Perez, J. C. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Pong, I. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Prestemon, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ravaioli, E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sabbi, G. L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Santini, C. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Schmalzle, J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Stoynev, S. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Strauss, T. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Vallone, G. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Wanderer, P. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wang, X. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yu, M. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2017-07-16

    This report presents the fabrication and QC data of MQXFS1, the first short model of the low-beta quadrupoles (MQXF) for the LHC High Luminosity Upgrade. It describes the conductor, the coils, and the structure that make the MQXFS1 magnet. Qualification tests and non-conformities are also presented and discussed. The fabrication of MQXFS1 was started before the finalization of conductor and coil design for MQXF magnets. Two strand design were used (RRP 108/127 and RRP 132/169). Cable and coil cross-sections were “first generation”.

  6. The Flexible Fabric of Space

    VanNorsdall, Erin Leigh

    2015-08-01

    This poster will clearly illustrate my understanding of how the fabric of space behaves. The poster will be on a large trampoline with a heavy bowling ball in the center. The observer will be able to clearly understand the much more complicated property of how an object in space, such as a star, literally bends the fabric of the space around as a result of its density. This will also help to explain, in very simple terms, how space-time is bendable, and therefore, travel in space can be as well.

  7. Fabrication Aware Form-finding

    Egholm Pedersen, Ole; Larsen, Niels Martin; Pigram, Dave

    2014-01-01

    This paper describes a design and construction method that combines two distinct material systems with fabrication aware form-finding and file-to-factory workflows. The method enables the fluent creation of complex materially efficient structures comprising high populations of geometrically uniqu...

  8. Nuclear fuel fabrication in India

    Kondal Rao, N

    1975-01-01

    The important role of a nuclear power program in meeting the growing needs of power in India is explained. The successful installation of Tarapur Atomic Power Station and Rajasthan Atomic Power Station as well as the work at Madras Atomic Power Station are described. The development of the Atomic Fuels Division and the Nuclear Fuel Complex, Hyderabad which is mainly concerned with the fabrication of fuel elements and the reprocessing of fuels are explained. The N.F.C. essentially has the following constituent units : Zirconium Plant (ZP) comprising of Zirconium Oxide Plant, Zirconium Sponge Plant and Zirconium Fabrication Plant; Natural Uranium Oxide Plant (UOP); Ceramic Fuel Fabrication Plant (CFFP); Enriched Uranium Oxide Plant (EUOP); Enriched Fuel Fabrication Plant (EEFP) and Quality Control Laboratory for meeting the quality control requirements of all plants. The capacities of various plants at the NFC are mentioned. The work done on mixed oxide fuels and FBTR core with blanket assemblies, nickel and steel assemblies, thermal research reactor of 100 MW capacity, etc. are briefly mentioned.

  9. Fabrication of green polymeric membranes

    Kim, Dooli; Nunes, Suzana Pereira

    2017-01-01

    Provided herein are methods of fabricating membranes using polymers with functionalized groups such as sulfone (e.g., PSf and PES), ether (e.g., PES), acrylonitrile (e.g., PAN), fluoride(e.g., pvdf and other fluoropolymers), and imide (e.g., extem) and ionic liquids. Also provided are membranes made by the provided methods.

  10. Gas-filled hohlraum fabrication

    Salazar, M.A.; Gobby, P.L.; Foreman, L.R.; Bush, H. Jr.; Gomez, V.M.; Moore, J.E.; Stone, G.F.

    1995-01-01

    Los Alamos National Laboratory (LANL) researchers have fabricated and fielded gas-filled hohlraums at the Lawrence Livermore National Laboratory (LLNL) Nova laser. Fill pressures of 1--5 atmospheres have been typical. We describe the production of the parts, their assembly and fielding. Emphasis is placed on the production of gas-tight polyimide windows and the fielding apparatus and procedure

  11. Nuclear fuel fabrication in India

    Kondal Rao, N.

    1975-01-01

    The important role of a nuclear power programme in meeting the growing needs of power in India is explained. The successful installation of Tarapur Atomic Power Station and Rajasthan Atomic Power Station as well as the work at Madras Atomic Power Station are described. The development of the Atomic Fuels Division and the Nuclear Fuel Complex, Hyderabad which is mainly concerned with the fabrication of fuel elements and the reprocessing of fuels are explained. The N.F.C. essentially has the following constituent units : Zirconium Plant (ZP) comprising of Zirconium Oxide Plant, Zirconium Sponge Plant and Zirconium Fabrication Plant; Natural Uranium Oxide Plant (UOP); Ceramic Fuel Fabrication Plant (CFFP); Enriched Uranium Oxide Plant (EUOP); Enriched Fuel Fabrication Plant (EEFP) and Quality Control Laboratory for meeting the quality control requirements of all plants. The capacities of various plants at the NFC are mentioned. The work done on mixed oxide fuels and FBTR core with blanket assemblies, nickel and steel assemblies, thermal research reactor of 100 MW capacity, etc. are briefly mentioned. (K.B.)

  12. Fabrication of green polymeric membranes

    Kim, Dooli

    2017-06-16

    Provided herein are methods of fabricating membranes using polymers with functionalized groups such as sulfone (e.g., PSf and PES), ether (e.g., PES), acrylonitrile (e.g., PAN), fluoride(e.g., pvdf and other fluoropolymers), and imide (e.g., extem) and ionic liquids. Also provided are membranes made by the provided methods.

  13. The Fabrication of Qualified Citizens

    Andrade-Molina, Melissa

    2017-01-01

    a rhizomatic analytical move, a historization of the present is deployed to map the fabrication of the desired qualified citizen in Chile. The analysis evidences the (re)production of dominant narratives about the “qualified citizen” are and have been entangled with the functioning of school geometry...

  14. ESTUDIOS DE PERIODISMO EN ARGENTINA: ANTECEDENTES E INTERROGANTES

    Adriana Amado Suárez

    2014-06-01

    Full Text Available Este artículo presenta de forma resumida una revisión de antecedentes de los estudios empíricos de periodismo en Argentina. En las publicaciones de los últimos años los investigadores coincidían en señalar falta de datos de la profesión y el escaso desarrollo de los marcos teóricos afines a los estudios de periodismo. La investigación local priorizó abordajes y métodos que no se ocupan del conjunto de los periodistas. Antes bien, buena parte de la investigación confunde análisis de los medios y los mensajes con el estudio del periodismo y sigue sin brindar datos que permitan conocer las condiciones de trabajo y el perfil profesional de los periodistas argentinos.

  15. Fabrication of elliptical SRF cavities

    Singer, W.

    2017-03-01

    The technological and metallurgical requirements of material for high-gradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10 μg g-1. The hydrogen content should be kept below 2 μg g-1 to prevent degradation of the quality factor (Q-value) under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Traditional and alternative cavity mechanical fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and electron beam welding. The welding of half-cells is a delicate procedure, requiring intermediate cleaning steps and a careful choice of weld parameters to achieve full penetration of the joints. A challenge for a welded construction is the tight mechanical and electrical tolerances. These can be maintained by a combination of mechanical and radio-frequency measurements on half-cells and by careful tracking of weld shrinkage. The main aspects of quality assurance and quality management are mentioned. The experiences of 800 cavities produced for the European XFEL are presented. Another cavity fabrication approach is slicing discs from the ingot and producing cavities by deep drawing and electron beam welding. Accelerating gradients at the level of 35-45 MV m-1 can be achieved by applying electrochemical polishing treatment. The single-crystal option (grain boundary free) is discussed. It seems that in this case, high performance can be achieved by a simplified treatment procedure. Fabrication of the elliptical resonators from a seamless pipe as an alternative is briefly described. This technology has yielded good

  16. Estudio molecular de pacientes colombianos afectados por enanismo esencial

    Navarrete Vargas, Julie Viviana

    2017-01-01

    Los síndromes de enanismo esencial microcefálico son un grupo de enfermedades monogénicas infrecuentes que se caracterizan principalmente por talla baja extrema proporcionada de inicio prenatal y microcefalia severa. En los pacientes que formaron parte del presente estudio se investigaron variantes en el gen PCNT debido a que presentaban hallazgos clínicos compatibles con el síndrome MOPD II (enanismo esencial osteodisplásico microcefálico tipo II). Posteriormente, se amplió el estudio con...

  17. Novel fabric pressure sensors: design, fabrication, and characterization

    Wang, Yangyong; Hua, Tao; Zhu, Bo; Li, Qiao; Yi, Weijing; Tao, Xiaoming

    2011-01-01

    Soft and pliable pressure sensors are essential elements in wearable electronics which have wide applications in modern daily lives. This paper presents a family of fabric pressure sensors made by sandwiching a piece of resistive fabric strain sensing element between two tooth-structured layers of soft elastomers. The pressure sensors are capable of measuring pressure from 0 to 2000 kPa, covering the whole range of human–machine interactions. A pressure sensitivity of up to 2.98 × 10 −3 kPa −1 was obtained. Theoretical modeling was conducted based on an energy method to predict the load–displacement relationship for various sensor configurations. By adjusting the Young's modulus of the two conversion layers, as well as the geometrical dimensions, the measurement ranges, and sensitivities of the sensors can be quantitatively determined. The sensors are being used for pressure measurements between the human body and garments, shoes, beds, and chairs

  18. Laser target fabrication, structure and method for its fabrication

    Farnum, Eugene H.; Fries, R. Jay

    1985-01-01

    The disclosure is directed to a laser target structure and its method of fabrication. The target structure comprises a target plate containing an orifice across which a pair of crosshairs are affixed. A microsphere is affixed to the crosshairs and enclosed by at least one hollow shell comprising two hemispheres attached together and to the crosshairs so that the microsphere is juxtapositioned at the center of the shell.

  19. Preparation of activated carbon fabrics from cotton fabric precursor

    Salehi, R.; Dadashian, F.; Abedi, M.

    2017-10-01

    The preparation of activated carbon fabrics (ACFs) from cotton fabric was performed by chemical activation with phosphoric acid (H3PO4). The operation conditions for obtaining the ACFs with the highest the adsorption capacity and process yield, proposed. Optimized conditions were: impregnation ratio of 2, the rate of temperature rising of 7.5 °C min-1, the activation temperature of 500 °C and the activation time of 30 min. The ACFs produced under optimized conditions was characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The surface area and pore volume of carbon nanostructures was characterized by BET nitrogen adsorption isotherm at 77 °K. The pore size distribution calculated from the desorption branch according to BJH method. The iodine number of the prepared ACFs was determined by titration at 30 °C based on the ASTM D4607-94. The results showed the improvement of porous structure, fabric shape, surface area (690 m2/g), total pore volume (0.3216 cm3/g), and well-preserved fibers integrity.

  20. Estudio de factibilidad para la implantación de un restaurante de cocina en Quito

    Abril Donoso, Aníbal Trosky

    2007-01-01

    Componentes y sustentos técnicos. Identificación y descripción de la empresa. Análisis de la industria o sector. Productos y servicos de la empresa. Datos importantes para entrar al mercado. Estudio de mercado. Objetivs del estudio de mercado. Investigación del mercado objetivo. Estudio técnico. Objetivos del estudio técnico. Localización del proyecto. Ingeniería del proyecto. Organización y administración. Estudio financiero. Objetivos de estudio financiero. Sistema contable de la empresa. C...

  1. Qualitative Investigation of Some Locally Produced Printed Fabrics ...

    The results obtained showed that the locally produced fabrics exhibited comparably better end – use performance characteristics in terms of fabric weight per square meter, fabric flammability, and linear density. While the foreign fabrics are better in terms of Crease recovery, fabric handle, fabric sett, fabric shrinkage, and ...

  2. Fabrication of superconducting niobium radio frequency structures

    Kirchgessner, J.; Amato, J.; Brawley, J.

    1983-01-01

    During the last several years a variety of superconducting radio frequency structures have been designed, fabricated and tested. The diverse structures and fabrication techniques are described. This paper is a description of the authors' experiences in this field

  3. Fabric quality issues related to apparel merchandising

    Das, Sonali

    2015-02-01

    Full Text Available The objectives of this study are to develop an understanding of fabric quality related issues and research gaps relevant to apparel manufacturing and merchandising within the South African context. The specific focus is on fabric objective...

  4. Quality in the fabrication process

    Romano, A.; Aguirre, F.

    2010-01-01

    Enusa commitment to quality in the manufacture process materializes in the application of the most advanced product quality control technologies such as not-destructive inspection techniques, like artificial vision, X-ray or UT inspection, or process parameter statistical control systems. Quality inspectors are trained and certified by the main National Quality Organizations and receive periodic training under a formal company training program that constantly updates their qualification. Fabrication quality control reliability is based on a strategy that prioritizes redundancy of critical inspection equipment's and inspection personnel knowledge polyvalence. Furthermore, improvement in fabrication quality is obtained by a systematic application of the six sigma methodology where added value is created in projects integrating crosscutting company knowledge, reinforcing the global company vision that the fuel business is based on quality. (Author)

  5. Device fabrication by plasma etching

    Mogab, C.J.

    1980-01-01

    Plasma etching as applied to many of the materials encountered in the fabrication of LSI's is complicated by loading effect-the dependence of etch rate on the integrated surface area to be etched. This problem is alleviated by appropriate choice of etchant and etching conditions. Appropriate choice of system parameters, generally most concerned with the inherent lifetime of etchant species, may also result in improvement of etch rate uniformity on a wafer-by-wafer basis

  6. Zircaloy 4 ingots' industrial fabrication

    Leyt, A.

    1987-01-01

    The technology developed for the industrial fabrication of Zircaloy-4 ingots is presented. According to the results obtained: a) the homogeneity of the ingots is analyzed, regarding the distribution of components (tin, iron, chromium, oxygen) and Brinell hardness as a function of different types of charge: zirconium sponge-recycling alloy material, sponge of zirconium-alloy; b) the distribution of the same parameters as a function of production is also analyzed. (Author)

  7. Nanocarbon materials fabricated using plasmas

    Hatakeyama, Rikizo

    2017-12-01

    Since the discovery of fullerenes more than three decades ago, new kinds of nanoscale materials of carbon allotropes called "nanocarbons" have so far been discovered or synthesized at successive intervals as cases such as carbon nanotubes, carbon nanohorns, graphene, carbon nanowalls, and a carbon nanobelt, while nanodiamonds were actually discovered before then. Their attractively excellent mechanical, physical, and chemical properties have driven researchers to continuously create one of the hottest frontiers in materials science and technology. While plasma states have often been involved in their discovery, on the other hand, plasma-based approaches to this exciting field originally hold promising and enormous potentials for advancing and expanding industrial/biomedical applications of nanocarbons of great diversity. This article provides an extensive overview on plasma-fabricated nanocarbon materials, where the term "fabrication" is defined as synthesis, functionalization, and assembly of devices to cover a wide range of issues associated with the step-by-step plasma processes. Specific attention has been paid to the comparative examination between plasma-based and non-plasma methods for fabricating the nanocarobons with an emphasis on the advantages of plasma processing, such as low-temperature/large-scale fabrication and diversity-carrying structure controllability. The review ends with current challenges and prospects including a ripple effect of the nanocarbon studies on the development of related novel nanomaterials such as transition metal dichalcogenides. It contains not only the latest progress in the field for cutting-edge scientists and engineers, but also the introductory guidance to non-specialists such as lower-class graduate students.

  8. Nanodisk fabrication by nanosphere lithography

    Lozhkina, O. A.; Lozhkin, M. S., E-mail: maksim.lozhkin@spbu.ru; Kapitonov, Yu. V. [St.Petersburg State University, 7/9 Universitetskaya nab., St. Petersburg, 199034 (Russian Federation)

    2016-06-17

    Top-down fabrication of regular nanodisk arrays from an A{sub 3}B{sub 5} epitaxial heterostructure containing quantum well is demonstrated. Dry ion etching through the mask was emloyed. The spin-coated monolayer of polystyrene nanospheres served as a mask. Nanodisk diameter could be precisely controlled by oxygen plasma resizing of spheres after deposition. Nanodisks with diameters down to 200 nm were made.

  9. Fabrication of sealed radiation sources

    Mars, Jean.

    1977-01-01

    The description is given for fabricating a sealed radiation source, consisting in depositing on a metal substrate a thin active coat of a radioelement, termed first coat, submitting this coated substrate to an oxidation treatment in order to obtain on the first coat an inactive coat of an oxide of the metal, termed second coat, and depositing a coat of varnish on this second inactive coat [fr

  10. El fenómeno administrativo como objeto de estudio

    Carlos Ramírez Cardona

    2013-07-01

    Full Text Available El perfil de la ciencia o de las ciencias llamadas administrativas resulta confuso cuan teoría general y el objeto de estudio de otras disciplinas relacionadas con el proceso administrativo o que constituyen campos de aplicación de principios y técnicas de la teoría general.

  11. Computational modelling of buckling of woven fabrics

    Anandjiwala, RD

    2006-02-01

    Full Text Available for reducing unit production cost is critically important if garment industries in developed countries are keen to improve their competitiveness vis-à-vis low labour cost countries. The mechanics of the buckling behaviour of woven fabric started... of woven fabric. INTRODUCTION The buckling, bending and drape behaviours of a woven fabric influence its performance during actual use and during the process of making-up into the end product. These properties are important, particularly when the fabric...

  12. Parallel fabrication of macroporous scaffolds.

    Dobos, Andrew; Grandhi, Taraka Sai Pavan; Godeshala, Sudhakar; Meldrum, Deirdre R; Rege, Kaushal

    2018-07-01

    Scaffolds generated from naturally occurring and synthetic polymers have been investigated in several applications because of their biocompatibility and tunable chemo-mechanical properties. Existing methods for generation of 3D polymeric scaffolds typically cannot be parallelized, suffer from low throughputs, and do not allow for quick and easy removal of the fragile structures that are formed. Current molds used in hydrogel and scaffold fabrication using solvent casting and porogen leaching are often single-use and do not facilitate 3D scaffold formation in parallel. Here, we describe a simple device and related approaches for the parallel fabrication of macroporous scaffolds. This approach was employed for the generation of macroporous and non-macroporous materials in parallel, in higher throughput and allowed for easy retrieval of these 3D scaffolds once formed. In addition, macroporous scaffolds with interconnected as well as non-interconnected pores were generated, and the versatility of this approach was employed for the generation of 3D scaffolds from diverse materials including an aminoglycoside-derived cationic hydrogel ("Amikagel"), poly(lactic-co-glycolic acid) or PLGA, and collagen. Macroporous scaffolds generated using the device were investigated for plasmid DNA binding and cell loading, indicating the use of this approach for developing materials for different applications in biotechnology. Our results demonstrate that the device-based approach is a simple technology for generating scaffolds in parallel, which can enhance the toolbox of current fabrication techniques. © 2018 Wiley Periodicals, Inc.

  13. Fabricating customized hydrogel contact lens

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  14. Micro Machining Enhances Precision Fabrication

    2007-01-01

    Advanced thermal systems developed for the Space Station Freedom project are now in use on the International Space Station. These thermal systems employ evaporative ammonia as their coolant, and though they employ the same series of chemical reactions as terrestrial refrigerators, the space-bound coolers are significantly smaller. Two Small Business Innovation Research (SBIR) contracts between Creare Inc. of Hanover, NH and Johnson Space Center developed an ammonia evaporator for thermal management systems aboard Freedom. The principal investigator for Creare Inc., formed Mikros Technologies Inc. to commercialize the work. Mikros Technologies then developed an advanced form of micro-electrical discharge machining (micro-EDM) to make tiny holes in the ammonia evaporator. Mikros Technologies has had great success applying this method to the fabrication of micro-nozzle array systems for industrial ink jet printing systems. The company is currently the world leader in fabrication of stainless steel micro-nozzles for this market, and in 2001 the company was awarded two SBIR research contracts from Goddard Space Flight Center to advance micro-fabrication and high-performance thermal management technologies.

  15. OpenSoC Fabric

    2014-08-21

    Recent advancements in technology scaling have shown a trend towards greater integration with large-scale chips containing thousands of processors connected to memories and other I/O devices using non-trivial network topologies. Software simulation proves insufficient to study the tradeoffs in such complex systems due to slow execution time, whereas hardware RTL development is too time-consuming. We present OpenSoC Fabric, an on-chip network generation infrastructure which aims to provide a parameterizable and powerful on-chip network generator for evaluating future high performance computing architectures based on SoC technology. OpenSoC Fabric leverages a new hardware DSL, Chisel, which contains powerful abstractions provided by its base language, Scala, and generates both software (C++) and hardware (Verilog) models from a single code base. The OpenSoC Fabric2 infrastructure is modeled after existing state-of-the-art simulators, offers large and powerful collections of configuration options, and follows object-oriented design and functional programming to make functionality extension as easy as possible.

  16. The SMES model coil. Fabrication

    Hanai, Satoshi; Nakamoto, Kazunari; Takahashi, Nobuji

    1998-01-01

    A SMES model coil was fabricated as R and D item in the development of component technologies for a 480 MJ/20 MW SMES pilot plant. The coil consists of four double-pancake windings. The coil is the same diameter but half the number of pancakes that will be needed for a SMES pilot plant. The NbTi cable-in-conduit conductor and superconducting joints between the double pancakes are cooled by a forced flow of supercritical helium. Prior to fabrication, various characteristics of the cable-in-conduit were measured by full-sized short samples from actual conductors and by scaled short samples from scaled conductors. The critical current of the scaled short samples was in agreement with that calculated from one strand of the conductor. The impedance between arbitrary dual-oxide coated strands in the full-size conductor was measured to be smaller than that obtained from two Cr-plated strands, which showed a good degree of stability in another coil. It was estimated that oxide-coated conductors would have high stability. Through fabrication of a model coil, it was demonstrated that a large forced-flow coil for a small-scale 100 kWh SMES device could be manufactured. (author)

  17. The SMES model coil. Fabrication

    Hanai, Satoshi; Nakamoto, Kazunari; Takahashi, Nobuji [Toshiba Corp., Yokohama, Kanagawa (Japan)] [and others

    1998-07-01

    A SMES model coil was fabricated as R and D item in the development of component technologies for a 480 MJ/20 MW SMES pilot plant. The coil consists of four double-pancake windings. The coil is the same diameter but half the number of pancakes that will be needed for a SMES pilot plant. The NbTi cable-in-conduit conductor and superconducting joints between the double pancakes are cooled by a forced flow of supercritical helium. Prior to fabrication, various characteristics of the cable-in-conduit were measured by full-sized short samples from actual conductors and by scaled short samples from scaled conductors. The critical current of the scaled short samples was in agreement with that calculated from one strand of the conductor. The impedance between arbitrary dual-oxide coated strands in the full-size conductor was measured to be smaller than that obtained from two Cr-plated strands, which showed a good degree of stability in another coil. It was estimated that oxide-coated conductors would have high stability. Through fabrication of a model coil, it was demonstrated that a large forced-flow coil for a small-scale 100 kWh SMES device could be manufactured. (author)

  18. Shock wave fabricated ceramic-metal nozzles

    Carton, E.P.; Stuivinga, M.E.C.; Keizers, H.L.J.; Verbeek, H.J.; Put, P.J. van der

    1999-01-01

    Shock compaction was used in the fabrication of high temperature ceramic-based materials. The materials' development was geared towards the fabrication of nozzles for rocket engines using solid propellants, for which the following metal-ceramic (cermet) materials were fabricated and tested: B4C-Ti

  19. Fabrication technology for ODS Alloy MA957

    ML Hamilton; DS Gelles; RJ Lobsinger; MM Paxton; WF Brown

    2000-01-01

    A successful fabrication schedule has been developed at Carpenter Technology Corporation for the production of MA957 fuel and blanket cladding. Difficulties with gun drilling, plug drawing and recrystallization were overcome to produce a pilot lot of tubing. This report documents the fabrication efforts of two qualified vendors and the support studies performed at WHC to develop the fabrication-schedule

  20. Fierce competition in the US fabrication market

    Schwartz, M.H.; Supko, E.M.

    1996-01-01

    The US fuel fabrication market has a clear international presence, but a future in which there is presently no expectation of growth in requirements. This market continues to be characterised by annual production capacity significantly exceeding current and anticipated fuel fabrication requirements, resulting in an extremely competitive market for LWR fuel fabrication services. (UK)

  1. 14 CFR 31.35 - Fabrication methods.

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fabrication methods. 31.35 Section 31.35 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: MANNED FREE BALLOONS Design Construction § 31.35 Fabrication methods. The methods of fabrication...

  2. HÁBITOS DE ESTUDIO VS. FRACASO ACADÉMICO

    Martha Rocío Torres Narváez

    2009-01-01

    Full Text Available El objetivo del artículo es exponer algunas estrategias de apoyo pedagógico que, articuladas con la estructura curricular del Programa de Fisioterapia de la Universidad del Rosario, apoyan el proceso de aprendizaje de los estudiantes a partir de las categorías analizadas con la aplicación del instrumento "Inventario de hábitos de estudio" a los estudiantes que cursaron una de las asignaturas de mayor fracaso académico. Los hábitos de estudio tienen una implicación en el rendimiento académico y esto influye en cómo se enfrenta el reto de asumir las responsabilidades de ser universitario. Como parte de la metodología, se realizó un análisis de los resultados de la aplicación del inventario antes nombrado, en aras de identificar y replantear las estrategias pedagógicas. Para esto se revisaron los planes de asignaturas y se determinaron las actividades extracurriculares que se diseñaron para abordar la problemática de la deserción estudiantil relacionada con el fracaso académico. El estudio realizado determinó la importancia del desarrollo de habilidades o hábitos de estudio apropiados para el buen desempeño del estudiante universitario. Además, comprobó que deben considerarse en el entorno universitario la cultura de aprendizaje en el proceso de formación, las habilidades de trabajo en equipo, la apropiación y el desarrollo de conocimiento, así como las buenas relaciones interpersonales, para disminuir el fracaso académico y mejorar los hábitos de estudio.

  3. High-Thermal-Conductivity Fabrics

    Chibante, L. P. Felipe

    2012-01-01

    Heat management with common textiles such as nylon and spandex is hindered by the poor thermal conductivity from the skin surface to cooling surfaces. This innovation showed marked improvement in thermal conductivity of the individual fibers and tubing, as well as components assembled from them. The problem is centered on improving the heat removal of the liquid-cooled ventilation garments (LCVGs) used by astronauts. The current design uses an extensive network of water-cooling tubes that introduces bulkiness and discomfort, and increases fatigue. Range of motion and ease of movement are affected as well. The current technology is the same as developed during the Apollo program of the 1960s. Tubing material is hand-threaded through a spandex/nylon mesh layer, in a series of loops throughout the torso and limbs such that there is close, form-fitting contact with the user. Usually, there is a nylon liner layer to improve comfort. Circulating water is chilled by an external heat exchanger (sublimator). The purpose of this innovation is to produce new LCVG components with improved thermal conductivity. This was addressed using nanocomposite engineering incorporating high-thermalconductivity nanoscale fillers in the fabric and tubing components. Specifically, carbon nanotubes were added using normal processing methods such as thermoplastic melt mixing (compounding twin screw extruder) and downstream processing (fiber spinning, tubing extrusion). Fibers were produced as yarns and woven into fabric cloths. The application of isotropic nanofillers can be modeled using a modified Nielsen Model for conductive fillers in a matrix based on Einstein s viscosity model. This is a drop-in technology with no additional equipment needed. The loading is limited by the ability to maintain adequate dispersion. Undispersed materials will plug filtering screens in processing equipment. Generally, the viscosity increases were acceptable, and allowed the filled polymers to still be

  4. SRF Cavity Fabrication and Materials

    Singer, W [DESY (Germany)

    2014-07-01

    The technological and metallurgical requirements of material for highgradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10μg/g. The hydrogen content should be kept below 2μg/g to prevent degradation of the Q-value under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Defects may be detected by quality control methods such as eddy current scanning and identified by a number of special methods. Conventional and alternative cavity fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and Electron-Beam Welding (EBW). The welding of half-cells is a delicate procedure, requiring intermediate cleaning steps and a careful choice of weld parameters to achieve full penetration of the joints. The equator welds are particularly critical. A challenge for a welded construction is the tight mechanical and electrical tolerances. These can be maintained by a combination of mechanical and radio-frequency measurements on halfcells and by careful tracking of weld shrinkage. The established procedure is suitable for large series production. The main aspects of quality assurance management are mentioned. Another cavity fabrication approach is slicing discs from the ingot and producing cavities by deep drawing and EBW. Accelerating gradients at the level of 35–45 MV·m–1 can be achieved by applying Electropolishing (EP) treatment. Furthermore, the single-crystal option (grain boundary free) is promising. It seems that in this case, high performance can be achieved by a simplified treatment procedure. Fabrication of the

  5. Urolitiasis obstructiva en ovinos: estudio de caso Urolitiasis obstructiva en ovinos: estudio de caso

    Abner Josué Gutiérrez Chávez

    2012-02-01

    Full Text Available A 5-months-old, commercial-crossbreed male lamb was remitted to post-morten study. The clinical history about of animal included: signs of severe abdominal distension, anorexia, poliaquiuria, straguria and prolonged urination posture, urine dribbling and blood-tinged urine. Necropsy revealed ascitis and a hemorrhagic fibrine membrane floating in approximately 8 litres of urine caused by a rupture of the urinary bladder in consequence of a total blockage of urethral lumen by multiple small stones localized in the sigmoid flexure of the animal. Obstructive urolithiasis is a common problem in the fed-flocks affecting between 20 % and 30 % of the animals. A diet with adequate mineral balance could reduce the health risk of formation of urinary stones. Un ovino macho de 5 meses de edad fue presentado para su estudio patológico. La historia clínica del animal incluía: postración, dificultad para incorporarse, distensión abdominal severa, pérdida de apetito, estranguria, poliaquiuria y hematuria. A la necropsia se observó la presencia de 8 litros aproximadamente de orina en cavidad abdominal y una membrana fibrino-hemorrágica flotante adherida a la vejiga a nivel de la lesión de ruptura, por una sobre distensión provocada por la presencia obstructiva total de cálculos urinarios localizados en la luz de la uretra a nivel de la flexura sigmoidea del animal. La urolitiasis obstructiva es una patología que se presenta en el 20 % - 30 % de los animales en engorda. Un adecuado balance mineral de la dieta rica en concentrados puede reducir el riesgo de la formación de urolitos.

  6. Remote fabrication of nuclear fuel: a secure automated fabrication overview

    Nyman, D.H.; Benson, E.M.; Yatabe, J.M.; Nagamoto, T.T.

    1981-01-01

    An automated line for the fabrication of breeder reactor fuel pins is being developed. The line will be installed in the Fuels and Materials Examination Facility (FMEF) presently under construction at the Hanford site near Richland, Washington. The application of automation and remote operations to fuel processing technology is needed to meet program requirements of reduced personnel exposure, enhanced safeguards, improved product quality, and increased productivity. Commercially available robots are being integrated into operations such as handling of radioactive material within a process operation. These and other automated equipment and chemistry analyses systems under development are described

  7. NCG61/24: Plan de Estudios de M??ster en Biomedicina Regenerativa

    Universidad de Granada

    2012-01-01

    Plan de Estudios de M??ster en Biomedicina Regenerativa. Resoluci??n de 5 de marzo de 2012, de la Universidad de Granada, por la que se publica el plan de estudios de M??ster en Biomedicina Regenerativa

  8. Facile fabrication of a superhydrophobic fabric with mechanical stability and easy-repairability.

    Zhu, Xiaotao; Zhang, Zhaozhu; Yang, Jin; Xu, Xianghui; Men, Xuehu; Zhou, Xiaoyan

    2012-08-15

    The poor mechanical stability of superhydrophobic fabrics severely hindered their use in practical applications. Herein, to address this problem, we fabricated a superhydrophobic fabric with both mechanical stability and easy-repairability by a simple method. The mechanical durability of the obtained superhydrophobic fabric was evaluated by finger touching and abrasion with sandpaper. The results show that rough surface textures of the fabric were retained, and the fabric surface still exhibited superhydrophobicity after tests. More importantly, when the fabric lost its superhydrophobicity after a long-time abrasion, it can be easily rendered with superhydrophobicity once more by a regeneration process. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Micro-fabricated all optical pressure sensors

    Havreland, Andreas Spandet; Petersen, Søren Dahl; Østergaard, Christian

    2017-01-01

    Optical pressure sensors can operate in certain harsh application areas where the electrical pressure sensors cannot. However, the sensitivity is often not as good for the optical sensors. This work presents an all optical pressure sensor, which is fabricated by micro fabrication techniques, where...... the sensitivity can be tuned in the fabrication process. The developed sensor design, simplifies the fabrication process leading to a lower fabrication cost, which can make the all optical pressure sensors more competitive towards their electrical counterpart. The sensor has shown promising results and a linear...... pressure response has been measured with a sensitivity of 0.6nm/bar....

  10. Design Thinking for Digital Fabrication in Education

    Smith, Rachel Charlotte; Iversen, Ole Sejer; Hjorth, Mikkel

    2015-01-01

    In this paper, we argue that digital fabrication in education may benefit from design thinking, to foster a more profound understanding of digital fabrication processes among students. Two related studies of digital fabrication in education are presented in the paper. In an observational study we...... found that students (eleven to fifteen) lacked an understanding of the complexity of the digital fabrication process impeding on the potentials of digital fabrication in education. In a second explorative research through design study, we investigated how a focus on design thinking affected the students...

  11. Innovative Application of Fabric Recycling in Fashion

    Chenyang Lee

    2017-10-01

    Full Text Available With the continuous development of the socialist market economy, human aesthetic standards are constantly changing, the occurrence of this situation to the development of the garment industry challenges, that is a single fabric has long been unable to meet people's aesthetic needs, And then the art of fabric reengineering will be born. This paper elaborates the meaning of fabric reworking art. This paper systematically describes the meaning of fabric reengineering to garment designer and garment itself, and comprehensively summarizes the fabric recycling technique and its characteristics.

  12. Fabric Reconstruction Based on Sustainable Development: Take the Type of Fabric Recycling as an Example

    Zhangting Guan

    2017-01-01

    Sustainable development is a very important concept of our time, it wants to do is to live in harmony with people, to protect the environment where our human survival. Fabric recycling refers to the use of a variety of traditional and high-tech means of the existing fabric fabric design and processing. So that the surface of a rich visual texture and tactile texture "through the fabric recycling approach. However, the fabric form and clothing design coordination between the clothing design is...

  13. Influence of Clothing Fabrics on Skin Microcirculation

    CHENG Ling; PAN Ning; ZHAO Lian-ying; HUAUNG Gu

    2010-01-01

    This study investigated the effects of clothing fabric on human skin microcirculation. Once skin is covered with a clothing fabric, human sensations, namely, coolness, warmth, softness, and roughness, are amused immediately, and the cutaneous micrecireulation may be changed consequently. Since the complex relationships of the human skin, the environment, and the clothing, there is few publication focusing on the physiological responses of the skin to the fabrics. In this paper, a Laser Doppler Flowmetry (LDF) was used to test the dynamic responses of the skin blood flow when the fabric was placed on the skin. Effects of different fabrics on the skin blood flux were investigated. The results show that cold stimulation of fabric has remarkable influences on the skin blood flux, and the surface properties of fabric are of importance to affect the human skin blood flow.

  14. Structure and yarn sensor for fabric

    Mee, D.K.; Allgood, G.O.; Mooney, L.R.; Duncan, M.G.; Turner, J.C.; Treece, D.A.

    1998-10-20

    A structure and yarn sensor for fabric directly determines pick density in a fabric thereby allowing fabric length and velocity to be calculated from a count of the picks made by the sensor over known time intervals. The structure and yarn sensor is also capable of detecting full length woven defects and fabric. As a result, an inexpensive on-line pick (or course) density measurement can be performed which allows a loom or knitting machine to be adjusted by either manual or automatic means to maintain closer fiber density tolerances. Such a sensor apparatus dramatically reduces fabric production costs and significantly improves fabric consistency and quality for woven or knitted fabric. 13 figs.

  15. doméstico. Discusiones y estudios recientes

    Patricia Arias

    2013-01-01

    Full Text Available Con base en la revisión de algunos estudios recientes que se han llevado a cabo en diver- sas comunidades rurales de las nuevas regiones migratorias, en este artículo se revisan, de manera crítica, dos interpretaciones de los estudios sobre la familia rural: la economía campesina como unidad de producción-consumo y el ciclo de desarrollo de la unidad doméstica. En las condiciones actuales la migración, interna e internacional, desem- peña un papel decisivo en las comunidades rurales. Muchos estudios han constatado la voluntad de las mujeres de salir de los grupos domésticos y sumarse a los flujos migra- torios por motivos particulares, por situaciones y demandas específicas de ellas; su salida ha contribuido al resquebrajamiento de los sistemas tradicionales de organización y re- producción de la familia campesina. Las feministas, y más tarde los estudios con la perspectiva de género, criticaron la visión de que las familias rurales constituían unidades de producción-consumo donde las decisiones correspondían a un modelo de estrategias familiares de sobrevivencia y reproducción (Hondagneu-Sotelo, 2007; Wolf, 1990. Ese modelo privilegiaba la homo- geneidad, la colectividad, la solidaridad y el consenso, es decir, suponía que en los hogares no había conflictos ni tensiones a la hora de tomar decisiones que a todos com- prometían (Ariza, 2007. La familia era una “unidad económica moral” que se susten- taba en los principios de “reciprocidad, consenso y altruismo” (Grasmuck y Pessar, 1991. Los estudios desde el enfoque de género señalaron que en las familias había relacio- nes de poder basadas en una distribución jerárquica y desigual de los derechos, recursos y autoridad que afectaban especialmente a las mujeres (Ariza, 2007; González Montes, 2002; Hondagneu-Sotelo, 2007; Wolf, 1990. Las críticas alcanzaron a los estudios migratorios: la migración no era un fenómeno exclusivamente de los hombres, las mi

  16. Apoyo a Estudios Geodinamicos con GPS en Guatemala

    Robles, V. R.

    2013-05-01

    El Instituto Geografico Nacional de Guatemala implemento 17 estaciones GNSS en el año 2009, como un proyecto de credito mixto de donacion de equipamiento del Gobierno de Suiza, el cual, este equipamiento de estaciones CORS GNSS es un sistema de recepción y transmisión de datos crudos GPS RInex que utiliza la tecnologia Spider Web de Leica, asi mismo este sistema esta sirviendo para el espablecimiento de un marco geodesico nacional de coordenadas geodesicas oficiales, el cual se calculan u obtienen las velocidades en tiempos temporales programados de las 17 Estaciones CORS. La infraestructura del marco geodesico de Guatemala esta sirviendo de base para las aplicaciones de estudios geodinamicos como el monitoreo de del desplazamiento de las placas tectonicas por medio de un estudio que se inicio en el año de 1999, llamado medicion con GPS el sistema de Fallas de los rios Polochic Motagua de Guatemala, tambien para un estudio que se implemento para deformación de corteza terrestre local en un Volcan Activo de Guatemala llamado Pacaya. Para el estudio de medicion con GPS en el sistema de falla de los Rios del polochic Motagua se implementaron 16 puntos para medir con GPS de dos frecuencias en el año de 1999, el cual, tres puntos son estaciones geodesicas CORS IGS llamados GUAT, ELEN y HUEH, despues en el año de 2003 se hizo otra medicion en un total de 20 puntos, que permitió calcular las velocidades de desplazamieinto de los puntos en mención, usando como referencia el modelo NUVEL 1A de DeMets de la placa de Norteamerica. Este estudio fue en cooperación internacional por la universidad de Nice de Francia y el IGNde Francia. Para el estudio del monitoreo con GPS del volcan activo de Guatemala, se implementaron cuatro puntos al rededor del volcan, el cual, se realizan cuatro mediciones al año, que permiten determinar axialmente la distancias entre los puntos, y rebisar estadisticamente cual es el comportamiento de las distancias en funcion del tiempo, si

  17. DESIGN AND FABRICATION OF MICRONOZZLES

    Kean How Cheah

    2011-05-01

    Full Text Available Normal 0 false false false EN-US ZH-CN X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:SimSun; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Micronozzle, a key component in micropropulsion system, has been designed and fabricated. Quasi 1D inviscid theory was used in designing a series of conical micronozzles of different expander half-angles (10°-50°. Aerospike micronozzle, a promising candidate to achieve high performance propulsion system, was designed with Angelino method (or Approximate method. Both micronozzles were fabricated using soft lithography, an inexpensive and relatively simple technique comparing to well-established deep reactive ion etching (DRIE technique, with polydimethylsiloxane (PDMS as structural material. Micronozzles with two different nozzle throat width, 53.5µm and 107µm, were fabricated for comparison. Microscopic inspections reveal 107µm is the more producible nozzle throat width with current equipments. The PDMS-based micronozzle can be used as cold gas microthruster system for micro- and nanosatellites.

  18. Aportaciones al estudio del proceso de combustión turbulenta de chorros en motores diesel de inyección directa.

    García Oliver, José María

    2016-01-01

    El objetivo global de esta tesis está encaminado a la construcción de las herramientas conceptuales necesarias para analizar de forma sencilla los mecanismos físicos que gobiernan el proceso de combustión de los chorros de combustible bajo las condiciones de contorno de un motor Diesel de inyección directa de unos dos litros de cilindrada unitaria altamente sobrealimentado. El trabajo parte del conocimiento sobre el comportamiento del chorro Diesel isotermo existente en el grupo de trabajo en...

  19. Advanced fabrication of optical materials

    Hed, P.P.; Blaedel, K.L.

    1986-01-01

    The fabrication of high-precision optical elements for new generations of high-power lasers requires a deterministic method of generating precision optical surfaces entailing considerably less time, skill, and money than present optical techniques. Such a process would use precision computer-controlled machinery with ongoing in situ metrology to generate precise optical surfaces. The implementation of deterministic processes requires a better understanding of the glass-grinding process, especially the control of ductile material removal. This project is intended to develop the basic knowledge needed to implement a computer-controlled optics-manufacturing methodology

  20. Estudio de la legislación ambiental en licencias de dragados de puertos en Brasil y España. Estudio de caso

    VIÑES BERNARDO, MARGARITA

    2011-01-01

    Este TFC consistirá en la realización de un estudio de la legislación ambiental existente en relación al dragado de puertos en Brasil y en España, en el análisis de los procesos de licenciamiento y de la metodología de la monitorización del dragado aplicada en un estudio de caso. Viñes Bernardo, M. (2011). Estudio de la legislación ambiental en licencias de dragados de puertos en Brasil y España. Estudio de caso. http://hdl.handle.net/10251/10344. Archivo delegado

  1. Homicidas juveniles en Bogotá, estudio de grupos focales

    Franklin Escobar Córdoba

    2015-07-01

    Materiales y Métodos. Estudio cualitativo mediante técnica de grupos focales. Resultados. Se encontró como el factor de riesgo más implicado la disponibilidad y uso de armas. Otros  factores de riesgo determinantes de la conducta delincuencial afectan la disposición del joven homicida para tener un comportamiento criminal y las estrategias de control que son elegidas por el individuo, dichos factores son apreciados de maneras distintas por los jóvenes homicidas y los no homicidas Conclusión. Este estudio arroja información clave que puede ser utilizada en el diseño e implementación de estrategias para enfrentar el homicidio juvenil como problema de salud pública.

  2. Fabrication of elastomeric silk fibers.

    Bradner, Sarah A; Partlow, Benjamin P; Cebe, Peggy; Omenetto, Fiorenzo G; Kaplan, David L

    2017-09-01

    Methods to generate fibers from hydrogels, with control over mechanical properties, fiber diameter, and crystallinity, while retaining cytocompatibility and degradability, would expand options for biomaterials. Here, we exploited features of silk fibroin protein for the formation of tunable silk hydrogel fibers. The biological, chemical, and morphological features inherent to silk were combined with elastomeric properties gained through enzymatic crosslinking of the protein. Postprocessing via methanol and autoclaving provided tunable control of fiber features. Mechanical, optical, and chemical analyses demonstrated control of fiber properties by exploiting the physical cross-links, and generating double network hydrogels consisting of chemical and physical cross-links. Structure and chemical analyses revealed crystallinity from 30 to 50%, modulus from 0.5 to 4 MPa, and ultimate strength 1-5 MPa depending on the processing method. Fabrication and postprocessing combined provided fibers with extensibility from 100 to 400% ultimate strain. Fibers strained to 100% exhibited fourth order birefringence, revealing macroscopic orientation driven by chain mobility. The physical cross-links were influenced in part by the drying rate of fabricated materials, where bound water, packing density, and microstructural homogeneity influenced cross-linking efficiency. The ability to generate robust and versatile hydrogel microfibers is desirable for bottom-up assembly of biological tissues and for broader biomaterial applications. © 2017 Wiley Periodicals, Inc.

  3. Fabrication of simulated DUPIC fuel

    Kang, Kweon Ho; Song, Ki Chan; Park, Hee Sung; Moon, Je Sun; Yang, Myung Seung

    2000-12-01

    Simulated DUPIC fuel provides a convenient way to investigate the DUPIC fuel properties and behavior such as thermal conductivity, thermal expansion, fission gas release, leaching, and so on without the complications of handling radioactive materials. Several pellets simulating the composition and microstructure of DUPIC fuel are fabricated by resintering the powder, which was treated through OREOX process of simulated spent PWR fuel pellets, which had been prepared from a mixture of UO2 and stable forms of constituent nuclides. The key issues for producing simulated pellets that replicate the phases and microstructure of irradiated fuel are to achieve a submicrometre dispersion during mixing and diffusional homogeneity during sintering. This study describes the powder treatment, OREOX, compaction and sintering to fabricate simulated DUPIC fuel using the simulated spent PWR fuel. The homogeneity of additives in the powder was observed after attrition milling. The microstructure of the simulated spent PWR fuel agrees well with the other studies. The leading structural features observed are as follows: rare earth and other oxides dissolved in the UO2 matrix, small metallic precipitates distributed throughout the matrix, and a perovskite phase finely dispersed on grain boundaries.

  4. Fabrication and calibration of FORTIS

    Fleming, Brian T.; McCandliss, Stephan R.; Kaiser, Mary Elizabeth; Kruk, Jeffery; Feldman, Paul D.; Kutyrev, Alexander S.; Li, Mary J.; Rapchun, David A.; Lyness, Eric; Moseley, S. H.; Siegmund, Oswald; Vallerga, John; Martin, Adrian

    2011-09-01

    The Johns Hopkins University sounding rocket group is entering the final fabrication phase of the Far-ultraviolet Off Rowland-circle Telescope for Imaging and Spectroscopy (FORTIS); a sounding rocket borne multi-object spectro-telescope designed to provide spectral coverage of 43 separate targets in the 900 - 1800 Angstrom bandpass over a 30' x 30' field-of- view. Using "on-the-fly" target acquisition and spectral multiplexing enabled by a GSFC microshutter array, FORTIS will be capable of observing the brightest regions in the far-UV of nearby low redshift (z ~ 0.002 - 0.02) star forming galaxies to search for Lyman alpha escape, and to measure the local gas-to-dust ratio. A large area (~ 45 mm x 170 mm) microchannel plate detector built by Sensor Sciences provides an imaging channel for targeting flanked by two redundant spectral outrigger channels. The grating is ruled directly onto the secondary mirror to increase efficiency. In this paper, we discuss the recent progress made in the development and fabrication of FORTIS, as well as the results of early calibration and characterization of our hardware, including mirror/grating measurements, detector performance, and early operational tests of the microshutter arrays.

  5. Polymer micromold and fabrication process

    Lee, Abraham P. (1428 Whitecliff Way, Walnut Creek, CA 94596); Northrup, M. Allen (923 Creston Rd., Berkeley, CA 94708); Ahre, Paul E. (1299 Gonzaga Ct., Livermore, CA 94550); Dupuy, Peter C. (1736 Waldo Ct., Modesto, CA 95358)

    1997-01-01

    A mold assembly with micro-sized features in which the hollow portion thereof is fabricated from a sacrificial mandrel which is surface treated and then coated to form an outer shell. The sacrificial mandrel is then selectively etched away leaving the outer shell as the final product. The sacrificial mandrel is fabricated by a precision lathe, for example, so that when removed by etching the inner or hollow area has diameters as small as 10's of micros (.mu.m). Varying the inside diameter contours of the mold can be accomplished with specified ramping slopes formed on the outer surface of the sacrificial mandrel, with the inside or hollow section being, for example, 275 .mu.m in length up to 150 .mu.m in diameter within a 6 mm outside diameter (o.d.) mold assembly. The mold assembly itself can serve as a micronozzle or microneedle, and plastic parts, such as microballoons for angioplasty, polymer microparts, and microactuators, etc., may be formed within the mold assembly.

  6. Polymer micromold and fabrication process

    Lee, A.P.; Northrup, M.A.; Ahre, P.E.; Dupuy, P.C.

    1997-08-19

    A mold assembly is disclosed with micro-sized features in which the hollow portion thereof is fabricated from a sacrificial mandrel which is surface treated and then coated to form an outer shell. The sacrificial mandrel is then selectively etched away leaving the outer shell as the final product. The sacrificial mandrel is fabricated by a precision lathe, for example, so that when removed by etching the inner or hollow area has diameters as small as 10`s of micros ({micro}m). Varying the inside diameter contours of the mold can be accomplished with specified ramping slopes formed on the outer surface of the sacrificial mandrel, with the inside or hollow section being, for example, 275 {micro}m in length up to 150 {micro}m in diameter within a 6 mm outside diameter (o.d.) mold assembly. The mold assembly itself can serve as a micronozzle or microneedle, and plastic parts, such as microballoons for angioplasty, polymer microparts, and microactuators, etc., may be formed within the mold assembly. 6 figs.

  7. LEU fuel fabrication in Argentina

    Giorsetti, D.R.; Gomez, J.O.; Marajofsky, A.; Kohut, C.

    1985-01-01

    As an Institution, aiming to meet with its own needs, CNEA has been intensively developing reduced enriched fuel to use in its own research and test reactors. Development of the fabrication technology as well as the design, installation and operation of the manufacturing plant, have been carried out with its own funds. Irradiation and post-irradiation of test miniplates have been taking place within the framework of the RERTR program. During the last years, CNEA has developed three LEU fuel types. In the previous RERTR meetings, we presented the technological results obtained with these fuel types. This paper focuses on CNEA LEU fuel element manufacturing status and the trained personnel we can offer in design and manufacture fuel capability. CNEA has its own fuel manufacturing technology; the necessary facilities to start the fuel fabrication; qualified technicians and professionals for: fuel design and behaviour analysis; fuel manufacturing and QA; international recognition of its fuel development and manufacturing capability through its ORR miniplate irradiation; its own natural uranium and the future possibility to enrich up to 20% U 235 ; the probability to offer a competitive fuel manufacturing cost in the international market; the disposition to cooperate with all countries that wish to take part and aim to reach an self-sufficiency in their own fuel supply needs

  8. Optimization of Ultrasonic Fabric Cleaning

    Hand, T.E.

    1998-05-13

    The fundamental purpose of this project was to research and develop a process that would reduce the cost and improve the environmental efficiency of the present dry-cleaning industry. This second phase of research (see report KCP-94-1006 for information gathered during the first phase) was intended to allow the optimal integration of all factors of ultrasonic fabric cleaning. For this phase, Garment Care performed an extensive literature search and gathered data from other researchers worldwide. The Garment Care-AlliedSignal team developed the requirements for a prototype cleaning tank for studies and acquired that tank and the additional equipment required to use it properly. Garment Care and AlliedSignal acquired the transducers and generators from Surftran Martin-Walter in Sterling Heights, Michigan. Amway's Kelly Haley developed the test protocol, supplied hundreds of test swatches, gathered the data on the swatches before and after the tests, assisted with the cleaning tests, and prepared the final analysis of the results. AlliedSignal personnel, in conjunction with Amway and Garment Care staff, performed all the tests. Additional planning is under way for future testing by outside research facilities. The final results indicated repeatable performance and good results for single layered fabric swatches. Swatches that were cleaned as a ''sandwich,'' that is, three or more layers.

  9. Porosity Prediction of Plain Weft Knitted Fabrics

    Muhammad Owais Raza Siddiqui

    2014-12-01

    Full Text Available Wearing comfort of clothing is dependent on air permeability, moisture absorbency and wicking properties of fabric, which are related to the porosity of fabric. In this work, a plug-in is developed using Python script and incorporated in Abaqus/CAE for the prediction of porosity of plain weft knitted fabrics. The Plug-in is able to automatically generate 3D solid and multifilament weft knitted fabric models and accurately determine the porosity of fabrics in two steps. In this work, plain weft knitted fabrics made of monofilament, multifilament and spun yarn made of staple fibers were used to evaluate the effectiveness of the developed plug-in. In the case of staple fiber yarn, intra yarn porosity was considered in the calculation of porosity. The first step is to develop a 3D geometrical model of plain weft knitted fabric and the second step is to calculate the porosity of the fabric by using the geometrical parameter of 3D weft knitted fabric model generated in step one. The predicted porosity of plain weft knitted fabric is extracted in the second step and is displayed in the message area. The predicted results obtained from the plug-in have been compared with the experimental results obtained from previously developed models; they agreed well.

  10. La actuación y los Estudios Literarios

    Karina Mauro

    2011-05-01

    de los estudios literarios en la investigación sobre la Actuación a partir del análisis de los conceptos de representación y mimesis aristotélica y de los problemas que acarrea la aplicación de estos conceptos en el análisis de la acción del actor en escena.

  11. Estudio hidrogeológico del valle de Mala

    Ministerio de Agricultura. Dirección General de Aguas, Suelos e Irrigaciones

    1980-01-01

    Determina el recurso hídrico subterráneo del valle del río Mala, mediante el análisis e investigación de las características hidrogeológicas, en base a las informaciones de diferentes etapas del estudio; para de esta manera, racionalizar mejor su uso, dando cumplimiento así a lo dispuesto por la Ley General de Aguas.

  12. Fabrication of flexible piezoelectric PZT/fabric composite.

    Chen, Caifeng; Hong, Daiwei; Wang, Andong; Ni, Chaoying

    2013-01-01

    Flexible piezoelectric PZT/fabric composite material is pliable and tough in nature which is in a lack of traditional PZT patches. It has great application prospect in improving the sensitivity of sensor/actuator made by piezoelectric materials especially when they are used for curved surfaces or complicated conditions. In this paper, glass fiber cloth was adopted as carrier to grow PZT piezoelectric crystal particles by hydrothermal method, and the optimum conditions were studied. The results showed that the soft glass fiber cloth was an ideal kind of carrier. A large number of cubic-shaped PZT nanocrystallines grew firmly in the carrier with a dense and uniform distribution. The best hydrothermal condition was found to be pH 13, reaction time 24 h, and reaction temperature 200°C.

  13. Fabrication of superhydrophobic cotton fabrics by silica hydrosol and hydrophobization

    Xu, Lihui; Zhuang, Wei; Xu, Bi; Cai, Zaisheng

    2011-04-01

    Superhydrophobic cotton fabrics were prepared by the incorporation of silica nanoparticles and subsequent hydrophobization with hexadecyltrimethoxysilane (HDTMS). The silica nanoparticles were synthesized via sol-gel reaction with methyl trimethoxy silane (MTMS) as the precursor in the presence of the base catalyst and surfactant in aqueous solution. As for the resulting products, characterization by particle size analyzer, scanning electron microscopy (SEM), scanning probe microscopy (SPM), X-ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA) were performed respectively. The size of SiO2 nanoparticles can be controlled by adjusting the catalyst and surfactant concentrations. The wettability of cotton textiles was evaluated by the water contact angle (WCA) and water shedding angle (WSA) measurements. The results showed that the treated cotton sample displayed remarkable water repellency with a WCA of 151.9° for a 5 μL water droplet and a WSA of 13° for a 15 μL water droplet.

  14. Generalidades de los estudios de casos y controles

    Alejandro González Garay

    2018-01-01

    Full Text Available ANTECEDENTES: los estudios de casos y controles son de utilidad cuando se buscan factores de riesgo para enfermedades poco comunes o que tienen un periodo de latencia prologado. OBJETIVO: identificar las principales características del estudio de casos y controles (Ca-Co para favorecer la disminución de sesgos durante su evaluación o conducción. DESCRIPCIÓN: este diseño se caracteriza por la selección de sujetos con o sin el evento de interés. Éstos se comparan para identificar los factores de riesgo que favorecieron la presencia de este evento. La finalidad de este tipo de estudios es la de inferir una relación causal expresada mediante razón de momios y los intervalos de confianza al 95%. CONCLUSIONES: el diseño de Ca-CO es relativamente fácil y rápido de realizar. Sin embargo, es susceptible a múltiples fuentes de sesgo, las cuales deben de ser minimizadas para obtener mayor confiabilidad de las inferencias obtenidas.

  15. Estudios marxistas de la cultura y los medios

    Roy Alfaro Vargas

    2016-05-01

    Full Text Available Este artículo introduce los Estudios Marxistas de la Cultura y los Medios (EMCM a Latinoamérica y expone los principales fundamentos teóricos y epistemológicos de los estudios marxistas de la cultura y los medios. Se analiza la relación entre la teoría de la auto-organización, la dialéctica y la teoría crítica, alrededor del estudio de la Web 2.0 y de los sitios de redes sociales. Además, se explica el rol de la teoría marxiana del valor dentro de los EMCM, como medio para establecer la crítica del trabajo digital alienado realizado por el usuario de los sitios de redes sociales. En este sentido, se expone el concepto de Web 3.0 como medio para la superación dialéctica de la Web 2.0, en cuanto proceso de participación democrática, basada en la construcción de medios alternativos.

  16. Nanocrystal thin film fabrication methods and apparatus

    Kagan, Cherie R.; Kim, David K.; Choi, Ji-Hyuk; Lai, Yuming

    2018-01-09

    Nanocrystal thin film devices and methods for fabricating nanocrystal thin film devices are disclosed. The nanocrystal thin films are diffused with a dopant such as Indium, Potassium, Tin, etc. to reduce surface states. The thin film devices may be exposed to air during a portion of the fabrication. This enables fabrication of nanocrystal-based devices using a wider range of techniques such as photolithography and photolithographic patterning in an air environment.

  17. Breeder reactor fuel fabrication system development

    Bennett, D.W.; Fritz, R.L.; McLemore, D.R.; Yatabe, J.M.

    1981-01-01

    Significant progress has been made in the design and development of remotely operated breeder reactor fuel fabrication and support systems (e.g., analytical chemistry). These activities are focused by the Secure Automated Fabrication (SAF) Program sponsored by the Department of Energy to provide: a reliable supply of fuel pins to support US liquid metal cooled breeder reactors and at the same time demonstrate the fabrication of mixed uranium/plutonium fuel by remotely operated and automated methods

  18. Hemp nanocellulose: fabrication, characterisation and application

    Dasong, Dai

    2015-01-01

    This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London Nanocellulose has gained lots of attentions in recent years due to the development of nanotechnology. Thousands of publications have been reported about the fabrication, characterization and application of nanocellulose, among which most of the nanocelluloses were fabricated from the microcrystalline cellulose (MCC) or pulp, and only two methods about the nanocellulose fabrication ha...

  19. Fabrication of Games and Learning

    Schoenau-Fog, Henrik; Reng, Lars; Kofoed, Lise

    2015-01-01

    The concept of Game based learning has proven to have many possibilities for supporting better learning outcomes, when using educational or commercial games in the classroom. However, there is also a great potential in using game development as a motivator in several other kinds of learning...... scenarios. Using game development as an approach for including game based learning in various educations has become more accessible due to more user friendly game development tools and systems. This study will thus focus on an exploration on how game development motivates students and what they learn when...... creating games. We exemplify the potential of using game fabrication as a learning environment with the investigation of a game production, which involved over 25 students across semesters. In order to investigate students’ experiences during this purposive game production, we set up an experiment where...

  20. The Danish fabricated metal industry:

    Hansen, Teis

    2010-01-01

    This paper aims to contribute to the knowledge on innovation processes in low- and medium-low-tech industries. Today, industries characterised as high-tech are perceived to be central to economic development, as the research intensity shields them from competition from low-wage countries....... This is less the case for low-tech industries, but their economic importance continues to be large, however. It is thus interesting to analyse how they manage to remain competitive. The analysis focuses on a case study of the fabricated metal industry by identifying the innovation strategies followed by firms...... located in a part of Jutland, where this industry has experienced growth. It is found that the ability to create tailor-made solutions is central to the competitiveness of these medium-low-tech firms. Knowledge is thus highly important, yet in different ways than for high-tech industries. This illustrates...

  1. Fabrication of Metallic Hollow Nanoparticles

    Kim, Jae-Woo (Inventor); Choi, Sr., Sang H. (Inventor); Lillehei, Peter T. (Inventor); Chu, Sang-Hyon (Inventor); Park, Yeonjoon (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor)

    2016-01-01

    Metal and semiconductor nanoshells, particularly transition metal nanoshells, are fabricated using dendrimer molecules. Metallic colloids, metallic ions or semiconductors are attached to amine groups on the dendrimer surface in stabilized solution for the surface seeding method and the surface seedless method, respectively. Subsequently, the process is repeated with additional metallic ions or semiconductor, a stabilizer, and NaBH.sub.4 to increase the wall thickness of the metallic or semiconductor lining on the dendrimer surface. Metallic or semiconductor ions are automatically reduced on the metallic or semiconductor nanoparticles causing the formation of hollow metallic or semiconductor nanoparticles. The void size of the formed hollow nanoparticles depends on the dendrimer generation. The thickness of the metallic or semiconductor thin film around the dendrimer depends on the repetition times and the size of initial metallic or semiconductor seeds.

  2. ATLAS facility fabrication and assembly

    Ballard, E O; Davis, H A; Nielsen, K E; Parker, G V; Parsons, W M

    2001-01-01

    Summary form only given. Atlas is a pulsed-power facility recently completed at Los Alamos National Laboratory to drive hydrodynamic experiments. This new generation pulsed-power machine consists of a radial array of 24, 240-kV Marx modules and transmission lines supplying current to the load region at the machine center. The transmission lines, powered by the Marx modules, consist of cable headers, load protection switches and tri-plates interfacing to the center transition section through detachable current joints. A conical power-flow-channel attaches to the transition section providing an elevated interface to attach the experimental loads for diagnostic access. Fabrication and assembly of all components for the Atlas machine was completed in August 2000. The machine has also progressed through a test phase where the Marx module/transmission line units were fired, individually, into a test load. Progression continued with eight and sixteen lines being fired. Subsequently, an overall machine test was condu...

  3. Container Materials, Fabrication And Robustness

    Dunn, K.; Louthan, M.; Rawls, G.; Sindelar, R.; Zapp, P.; Mcclard, J.

    2009-01-01

    The multi-barrier 3013 container used to package plutonium-bearing materials is robust and thereby highly resistant to identified degradation modes that might cause failure. The only viable degradation mechanisms identified by a panel of technical experts were pressurization within and corrosion of the containers. Evaluations of the container materials and the fabrication processes and resulting residual stresses suggest that the multi-layered containers will mitigate the potential for degradation of the outer container and prevent the release of the container contents to the environment. Additionally, the ongoing surveillance programs and laboratory studies should detect any incipient degradation of containers in the 3013 storage inventory before an outer container is compromised.

  4. Photolithography and Micro-Fabrication/ Packaging Laboratories

    Federal Laboratory Consortium — The Photolithography and Micro-Fabrication/Packaging laboratories provide research level semiconductor processing equipment and facilities that do not require a full...

  5. Fuel Fabrication Capability Research and Development Plan

    Senor, David J.; Burkes, Douglas

    2013-06-28

    The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative (GTRI) Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors.

  6. New Fabrication Strategies for Polymer Electrolyte Batteries

    Shriver, D

    1997-01-01

    .... The objective of this research was to fabricate lithium-polymer batteries by techniques that may produce a thin electrolyte and cathode films and with minimal contamination during fabrication. One such technique, ultrasonic spray was used. Another objective of this research was to test lithium cells that incorporate the new polymer electrolytes and polyelectrolytes.

  7. Quality assurance for breeder reactor fuel fabrication

    Marx, E.R.

    1978-01-01

    Fuel performance in the Fast Flux Test Facility (FFTF) depends on fabrication of fuel to rigorous quality standards. The quality program including Management, Procurement, Fabrication, Inspection, Records, and Audits is discussed as well as unique mixed oxide fuel inspections such as homogeneity inspection, analytical chemistry, and nondestructive fissile assay

  8. Process for fabricating mixed-oxide powders

    Elmaleh, D.; Giraudel, A.

    1975-01-01

    A physical-chemical process for fabricating homogeneous powders suitable for sintering is described. It can be applied to the synthesis of all mixed oxides having mutually compatible and water soluble salts. As a specific example, the fabrication of lead titanate-zirconate powders used to make hot pressed ceramics is described. These ceramics show improved piezoelectric properties [fr

  9. Remote fabrication of breeder reactor fuel

    Gerber, E.W.; Hoitink, N.C.; Graham, R.A.

    1984-06-01

    The Secure Automated Fabrication (SAF) Line, a remotely operable plutonium fuel fabrication facility, incorporates advanced automation techniques. Included in the plant are 24 robots used to perform complex operations, and to enhance equipment standardization and ease of maintenance. Automated equipment is controlled remotely from centrally located supervisory computer control consoles or alternatively from control consoles dedicated to individual systems

  10. Stainless steel fabrications: past and present

    Daniels, R.

    1986-01-01

    The paper deals with stainless steel fabrications of Fairey Engineering Company for the nuclear industry. The manufacture of stainless steel containers for Magnox and Advanced Gas Cooled Reactors, flexible fabrication facility, and welding development, are all briefly described. (U.K.)

  11. Estudios pioneros en torno al origen del lenguaje natural

    Martínez Contreras, Jorge

    2011-02-01

    Full Text Available It has being an ancient desire to ask apes what their natural lives are. De la Mettrie was the first to propose, in the 18th C., that the sign language of deaf adults could be used with them since they do not speak. We enhance here some of the pioneering projects of the two strategies for this endeavor: the use of ASL and the utilization of lexigrams and computers. Besides the ancient communicative quest with them, the evolutionist’s perspective has seen in these studies a way to find out how the natural language (NL emerged in hominids. If it is clear that apes do no possess totally the NL, the linguistic turn in primatology has left way, as in philosophy, to more complex field and laboratory cognitive studies of less anthropocentric nature.

    Tratar de hablar con los simios y preguntarles cosas sobre su vida natural es un viejo deseo. De la Mettrie propone, en el s. XVIII, que se les enseñe el lenguaje de los sordos en vista de que no pueden hablar. Resaltamos aquí algunos estudios pioneros en relación con las dos estrategias llevadas a cabo para tratar de hablar con los simios: el uso del lenguaje americano de sordos (ASL y el de los lexigramas y computadoras. Además del viejo interés interrogativo humano hacia ellos, la perspectiva evolucionista ha visto en estos estudios un medio de investigar cómo surgió el lenguaje natural (LN en homínidos. Si queda claro que los simios no poseen totalmente el LN, el giro lingüistico en primatología ha cedido, como en filosofía, el paso a estudios cognitivos más complejos, de campo y de laboratorio, de orientación menos antropomórfica.

  12. Solid freeform fabrication of biomaterials

    Chu, Tien-Min Gabriel

    1999-12-01

    The biological performance of porous Hydroxyapatite (HA) is closely related to the pore architecture in the implants. The study on the effect of architecture to the biological performance of porous HA requires new manufacturing methods that can fabricate implants with controlled pores channels. In this thesis, four highly loaded HA and alumina suspensions were formulated and three different processes involving Solid Freeform Fabrication (SFF) were developed. An aqueous HA suspension in acrylamides was first formulated and the UV-curing properties were evaluated. With a medical grade HA powder, two non-aqueous HA suspensions were formulated: a 40 vol.% HA suspension in Hexanediol Diacrylate (HDDA) and a 40 vol.% HA suspension in 1:1 mix of Propoxylated Neopentyl Glycol Diacrylate (PNPGDA) and Isobomyl Acrylate (EBA). A 50 vol.% Alumina suspension in PNPGDA/IBA was also formulated. The effect of dispersant to the viscosity of the suspensions was characterized. In the Stereolithography (SL) method, the curing parameters of HA/HDDA and HA/PNPGDA/IBA were determined. Prototype HA implants with 1,700 mum internal channels were built directly on an SL Apparatus (SLA). The designed internal channel patterns were preserved after sintering. In the Ink-jet printing method, the high temperature flow behaviors of the suspensions were characterized. The effects of solids loading to the viscosity of the suspensions were modeled with Krieger-Dougherty equation. Leveling theory developed in paint industry was employed to analyze the self-leveling capability of the suspensions. In the indirect SL method, the thermal curing behavior of HA and alumina suspensions were characterized. The total cure time was measured and the curing kinetics was modeled. Negative molds for the implants were designed and built on SLA with epoxy resin. HA/PNPGDA/IBA was cast into the mold and cured in an oven. The binders and the epoxy mold were pyrolyzed and the green bodies sintered. Internal channels

  13. Instituciones educativas sustentables en Colombia caso de estudio colegio Rochester

    García Gonzalez, Verónica; Bonilla Ruiz, Juliana; Cadena Sanchez, Laura Andrea

    2015-01-01

    En el proyecto en curso se pretende explicar cuáles son las condiciones y requisitos para implementar la cultura de organizaciones verdes en las instituciones educativas de nuestro país. Partiendo desde la transformación del colegio Rochester en un green school, teniendo en cuenta los requerimientos que exige el sistema de certificación LEED “Leadership Energy & Enviromental Desing” y los procesos administrativos que este involucra. Este estudio se llevara a cabo a través de una metodología q...

  14. Estudio de los Tweens y las Redes Sociales, Tacna, 2016.

    Mamani Mamani, Deysi Gaby; Gonzalo Jara, Gustavo Richard; Yufra Tozo, Wilfredo Renato

    2016-01-01

    La tesis propuesta en las siguientes páginas: “Estudio de los Tweens y las Redes Sociales, Tacna, 2016”, busca poner en evidencia las preferencias, razones de uso, y uso, de las redes sociales por parte del grupo etario conformado por los tweens o pre adolescentes (Niños entre 8 y 12 años). La investigación presentada es de carácter descriptivo, de diseño no experimental y transversal, y se llevó a cabo aplicando un cuestionario (Asistido), conformado por 11 preguntas, a 146 niños entre la...

  15. Estudio del abandono empleando un modelo de riesgos proporcionales

    Gonzalez, Mariana Verónica

    2017-01-01

    En este trabajo se aplica  un modelo de riesgo semi-paramétrico para identificar algunas variables que contribuyen a explicar el fenómeno del abandono estudiantil en una unidad académica de la Universidad Nacional de Córdoba (UNC), Argentina. La inactividad académica prolongada se toma como proxy de la variable dependiente. Los resultados muestran que el promedio del secundario aparece como importante predictor de la deserción. Además, se detectó que los estudiantes que costean sus estudios c...

  16. Cuidadores de Cartagena y su contexto de cuidado: estudio comparativo

    Montalvo-Prieto, Amparo; Flórez-Torres, Inna Elida

    2009-01-01

    Objetivo: comparar las características sociodemográficas y de relación de cuidado de cuidadores de niños y adultos con enfermedades crónicas discapacitantes de Cartagena, Colombia. Método: estudio descriptivo, cuantitativo, de corte transversal. Se realizó un muestreo no probabilístico, por conveniencia, entre el 2006 y el 2007. Participaron 300 cuidadores: 98 de niños y 202 de adultos con enfermedades crónicas. Se utilizó la encuesta de caracterización de los cuidadores. Para describir las a...

  17. Aborto y Parlamento: un estudio sobre Brasil, Uruguay y Argentina

    Rocha,Maria Isabel Baltar da; Rostagnol,Susana; Gutiérrez,María Alicia

    2009-01-01

    El presente trabajo desarrolla un estudio comparativo entre Brasil, Argentina y Uruguay sobre las legislaciones y las acciones de diversos actores en relación a la despenalización y/o legalización del aborto. El tema se instala en la agenda pública en los tres países a partir del proceso de democratización iniciado en la década de los 80 produciéndose diversas intervenciones tanto del movimiento de mujeres, como de las corporaciones médicas y otros actores sociales en el transcurso de la déca...

  18. Estudios de impacto ambiental en viaductos de gran longitud

    Moya Matute, David

    2009-01-01

    El contenido de esta tesina forma parte de un proyecto concedido por el Ministerio de Educación y Ciencia en el año 2006 y coordinado entre el Departamento de Ingeniería de la Construcción de la UPC y el Departamento de Ingeniería Civil de la UCLM. El objeto de dicho proyecto de investigación es el estudio de la optimización de viaductos de gran longitud desde distintas vertientes, como son: estructural, plazo de ejecución, impacto ambiental, seguridad y salud, costes globales, et...

  19. Análisis y estudio del microcemento

    PENADÉS SANZ, JONATAN

    2015-01-01

    [es] El presente Trabajo Final de Grado trata sobre el microcemento, que es un revestimiento continuo multicapa a base de resinas poliméricas, áridos y elementos cementosos. En este trabajo se analizan sus propiedades y su forma de aplicación, también se mencionan algunos consejos a tener en cuenta para su correcto empleo, y se estudian tanto sus ventajas e inconvenientes como sus rendimientos y costes. Además del estudio teórico se desarrolla una aplicación práctica mediante la realización d...

  20. Estudio de viabilidad de una central de restaurantes

    Sáez Lanaspa, Idoya

    2015-01-01

    Mediante este estudio de viabilidad hemos analizado un nuevo campo dentro de la gastronomía y veremos su impacto en el mercado. Queremos presentar un nuevo concepto de restaurante, fuera de lo tradicional, de comida rápida basado en el buen gusto, la comida saludable e inspirado en una nueva idea de servicio más común en otros países como Estados Unidos. Instalado en un contenedor reciclado, reformado y adaptado con zona de comedor y cocina visible, creando un ambiente agrad...

  1. Estudio de factibilidad para un calzado personalizable femenino

    Durán Pimienta, Oscar Adrián; Jaimes Santamaría, Juan Camilo

    2011-01-01

    El presente documento describe el proceso de investigación realizado por dos estudiantes de la Universidad EAFIT sobre la factibilidad de desarrollar un calzado personalizable femenino, en este proceso se llevaron a cabo diferentes estudios primarios con el fin de poseer una contextualización sobre la situación económica tanto del sector calzado, cuero y sus manufacturas, como del país -- Además se realizó una investigación sobre los diferentes procesos necesarios para la realizac...

  2. Aprender a dormir sin mam??: estudio de casos

    ??lvarez Lozano, Marta

    2015-01-01

    Dado el caso de un ni??o con un h??bito incorrecto de sue??o, con sus correspondientes consecuencias, se lleva a cabo un estudio de casos que pretende modificar este h??bito a trav??s de un programa de intervenci??n basado en la reeducaci??n del sue??o mediante la modificaci??n de conducta. Para proceder a modificarla se ha trabajado con un m??todo de desensibilizaci??n sistem??tica, que a su vez, se ayuda de un sistema de econom??a de fichas para causar motivaci??n en el sujeto, y adem??s, d...

  3. Aproximaciones proteómicas para el estudio del envejecimiento

    Fanjul Hevia, Víctor

    2014-01-01

    La población mundial está envejeciendo progresivamente y la edad es el factor principal de riesgo de enfermedad cardiovascular (ECV), que a su vez es el principal problema de salud en países desarrollados. Aún no se conocen en profundidad los mecanismos moleculares que provocan el envejecimiento ni aquéllos que originan la ECV, y su estudio podría conducir hacia el desarrollo de estrategias preventivas o de terapias que alarguen significativamente la vida y mejoren su calidad. La progeria ...

  4. Stuart Hall sobre “hacer estudios culturales”

    Mato, Daniel; Universidad Nacional Tres de Febrero (Untref), Buenos Aires, Argentina

    2016-01-01

    Traducción de Emeshe Juhász MininbergEmeshe Juhász Mininberg es escritora e investigadora independiente. Doctora en Filosofía y Letras, Yale University, Estados Unidos. Traductora y editora de textos de crítica cultural y de artes plásticas. Ha publicado varios artículos sobre ciudadanía, cultura e identidad nacional en tiempos de globalización, que aparecen, entre otros, en Cultura, política y sociedad: perspectivas latinoamericanas (Clacso, 2005) y en el Diccionario de estudios culturales l...

  5. Estudio electrocinético de un suelo sometido

    Hernandez-luis, Felipe; Ramirez, Carolina; Arbelo, Carmen

    2011-01-01

    En el presente trabajo se analizan algunos cambios producidos en las propiedades de un suelo sometido a impacto térmico. Para llevar a cabo este estudio se utiliza una técnica electrocinética basada en los mismos principios que la electrorremediación. El análisis se enfoca en la variación, durante el tratamiento, de la corriente de electrólisis y de la diferencia de potencial generada en el interior del suelo en una región cercana a la cámara de los electrodos...

  6. Estudio de la Esquizofrenia en el Núcleo Familiar

    Núñez-Borja Castro, Luis Alberto

    2017-01-01

    La presente tesis desarrolla el Estudio de la Esquizofrenia en la familia a partir de tres casos de hogares que cuentan entre sus miembros con un paciente diagnosticado con Esquizofrenia y con el cual conviven día a día. Se evaluó los cambios que ocurren y están ocurriendo en el comportamiento en el seno de tres familias que viven con un paciente diagnosticado con este trastorno mental. Para llevar a cabo esta investigación se trabajó con una muestra de tres pacientes aquejados con este...

  7. Estado Actual y Retos Futuros en el Estudio del Burnout

    Salanova Soria, Marisa; Llorens Gumbau, Susana

    2008-01-01

    El objetivo principal de este artículo es ofrecer una revisión de la actual investigación aplicada del síndrome de quemarse por el trabajo o burnout. Comenzamos con el concepto de burnout, su evolución desde los primeros estudios en ocupaciones de servicios, hasta la actualidad en donde la investigación ha demostrado la importancia de considerar otras ocupaciones, y ampliar las dimensiones clave del burnout. En segundo lugar, examinaremos cómo evaluar el burnout, en función de la pos...

  8. Modelos parentales en el contexto urbano: un estudio exploratorio

    Martínez Licona, José Francisco; García Rodrigo, María Isabel; Collazo Martínez, Jonathan Carlos

    2017-01-01

    Resumen: El propósito de este trabajo es explorar las características que tienen las familias potosinas en cuanto a su cultura parental; es decir, explorar sus pautas de crianza, los diferentes vínculos de apego que se construyen y los patrones de éxito que se promueven para relacionarlos con sus características biográficas. El estudio se efectuó en la zona conurbada de San Luis Potosí (México), con la participación de 1008 familias de diferentes niveles culturales y se utilizó un instrumento...

  9. Estudio de los galactanos del alga roja pterocladiella Capillacea

    Errea, María Inés

    2001-01-01

    Existen dos familias de polisacáridos sintetizados por algas rojas, los carragenanos y el ágar, que, debido a sus propiedades reológicas, que les permiten estabilizar soluciones o emulsiones acuosas, son utilizados en la industria farmacéutica y alimentaria de todo el mundo. Este Trabajo de Tesis comprende los tópicos que se indican a continuación: a) Estudio de la estructura de los galactanos que componen el sistema de polisacáridos de la agarofita Plerocladíella capillacea (Gelidiales, Geli...

  10. Efectividad de la maniobra de Sellick: un estudio con Glidescope

    Muñoz Ávalos, Natalia; Robledo, María de la Flor

    2014-01-01

    La compresión cricoidea fue descrita en 1961 por Sellick como método para reducir el riesgo de broncoaspiración durante la fase de inducción de una anestesia general, formando parte de los pilares de la secuencia de intubación rápida. No obstante, cada vez son más los detractores que cuestionan la efectividad de esta maniobra a la luz de las últimas publicaciones . El presente estudio propone verificar la efectividad de la presión cricoidea en ocluir la luz esofágica mediante visión dir...

  11. Estudios sobre metales arqueológicos quemados

    Montero Ruiz, Ignacio; Rovira Llorens, Salvador

    2002-01-01

    El registro arqueológico nos ofrece materiales metálicos que han sido sometidos a un proceso de quemado ya sea intencional, por su inclusión en ajuares funerarios con el rito de cremación, bien de manera accidental por fuegos o incendios. Se intentan observar e identificar las huellas que este proceso ha podido dejar en materiales metálicos no ferreos: unas veces visualmente reconocibles por la propia deformación del objeto y otras acudiendo a los estudios metalográficos para observar la estr...

  12. Traumatismo torácico. Estudio de un cuatrienio

    Moya Rosa, Enrique J; Marrero Peláez, Niuris

    2002-01-01

    Se realizó un estudio descriptivo con los expedientes clínicos de 252 pacientes afectados por trauma de tórax, ingresados en la unidad de politrauma del Hospital Provincial Docente Manuel Ascunce Domenech de Camagüey, desde enero de 1996 a diciembre de1999. Analizamos las variables edad, sexo, causas, tipo de lesión, su relación con otras regiones lesionadas, así como el estado de los pacientes al egresar. Existió un predominio del sexo masculino con respecto al femenino; los grupos de edades...

  13. El abandono en las etapas iniciales de los estudios superiores

    Norma Zandomeni; Sandra Canale; Andrea Pacifico; Fernanda Pagura

    2016-01-01

    En este artículo se presenta una investigación sobre abandono de los estudios superiores realizada en una universidad argentina. Con un abordaje metodológico cuanti-cualitativo, se analizan datos secundarios y se recupera la perspectiva de distintos actores mediante talleres, encuestas y entrevistas. Se aborda el abandono que se produce en el proceso del ingreso y el generado en los dos primeros años, tanto en su cuantificación como en los factores que operan en el mismo. En el primer caso el...

  14. Cylindrical fabric-confined soil structures

    Harrison, Richard A.

    A cylindrical fabric-soil structural concept for implementation on the moon and Mars which provides many advantages is proposed. The most efficient use of fabric is to fashion it into cylindrical tubes, creating cylindrical fabric-confined soil structures. The length, diameter, and curvature of the tubes will depend on the intended application. The cylindrical hoop forces provide radial confinement while end caps provide axial confinement. One of the ends is designed to allow passage of the soil into the fabric tube before sealing. Transportation requirements are reduced due to the low mass and volume of the fabric. Construction requirements are reduced due to the self-erection capability via the pneumatic exoskeleton. Maintenance requirements are reduced due to the passive nature of the concept. The structure's natural ductility is well suited for any seismic activity.

  15. Engineering Non-Wetting Antimicrobial Fabrics

    van den Berg, Desmond

    This research presents novel techniques and a review of commercially available fabrics for their antimicrobial potential. Based on previous research into the advantages of superhydrophobic self-cleaning surfaces against bacterial contamination, insights into what can make a superhydrophobic fabric inherently antimicrobial were analyzed. Through comparing the characterization results of scanning electron microscopy (SEM) and optical profilometry to microbiology experiments, hypotheses into the relationship between the contact area of a bacterial solution and the extent of contamination is developed. Contact scenario experiments, involving the use of fluorescence microscopy and calculating colony forming units, proved that the contamination potential of any fabric is due to the wetting state exhibited by the fabric, as well as the extent of surface texturing. Transmission experiments, utilizing a novel technique of stamping a contaminated fabric, outlined the importance of retention of solutions or bacteria during interactions within the hospital environment on the extent of contamination.

  16. APT target-blanket fabrication development

    Fisher, D.L.

    1997-06-13

    Concepts for producing tritium in an accelerator were translated into hardware for engineering studies of tritium generation, heat transfer, and effects of proton-neutron flux on materials. Small-scale target- blanket assemblies were fabricated and material samples prepared for these performance tests. Blanket assemblies utilize composite aluminum-lead modules, the two primary materials of the blanket. Several approaches are being investigated to produce large-scale assemblies, developing fabrication and assembly methods for their commercial manufacture. Small-scale target-blanket assemblies, designed and fabricated at the Savannah River Site, were place in Los Alamos Neutron Science Center (LANSCE) for irradiation. They were subjected to neutron flux for nine months during 1996-97. Coincident with this test was the development of production methods for large- scale modules. Increasing module size presented challenges that required new methods to be developed for fabrication and assembly. After development, these methods were demonstrated by fabricating and assembling two production-scale modules.

  17. Fabricating 3D figurines with personalized faces.

    Tena, J Rafael; Mahler, Moshe; Beeler, Thabo; Grosse, Max; Hengchin Yeh; Matthews, Iain

    2013-01-01

    We present a semi-automated system for fabricating figurines with faces that are personalised to the individual likeness of the customer. The efficacy of the system has been demonstrated by commercial deployments at Walt Disney World Resort and Star Wars Celebration VI in Orlando Florida. Although the system is semi automated, human intervention is limited to a few simple tasks to maintain the high throughput and consistent quality required for commercial application. In contrast to existing systems that fabricate custom heads that are assembled to pre-fabricated plastic bodies, our system seamlessly integrates 3D facial data with a predefined figurine body into a unique and continuous object that is fabricated as a single piece. The combination of state-of-the-art 3D capture, modelling, and printing that are the core of our system provide the flexibility to fabricate figurines whose complexity is only limited by the creativity of the designer.

  18. Composite metal foil and ceramic fabric materials

    Webb, Brent J.; Antoniak, Zen I.; Prater, John T.; DeSteese, John G.

    1992-01-01

    The invention comprises new materials useful in a wide variety of terrestrial and space applications. In one aspect, the invention comprises a flexible cloth-like material comprising a layer of flexible woven ceramic fabric bonded with a layer of metallic foil. In another aspect, the invention includes a flexible fluid impermeable barrier comprising a flexible woven ceramic fabric layer having metal wire woven therein. A metallic foil layer is incontinuously welded to the woven metal wire. In yet another aspect, the invention includes a material comprising a layer of flexible woven ceramic fabric bonded with a layer of an organic polymer. In still another aspect, the invention includes a rigid fabric structure comprising a flexible woven ceramic fabric and a resinous support material which has been hardened as the direct result of exposure to ultraviolet light. Inventive methods for producing such material are also disclosed.

  19. Large superconducting coil fabrication development

    Brown, R.L.; Allred, E.L.; Anderson, W.C.; Burn, P.B.; Deaderick, R.I.; Henderson, G.M.; Marguerat, E.F.

    1975-01-01

    Toroidal fields for some fusion devices will be produced by an array of large superconducting coils. Their size, space limitation, and field requirements dictate that they be high performance coils. Once installed, accessibility for maintenance and repairs is severely restricted; therefore, good reliability is an obvious necessity. Sufficient coil fabrication will be undertaken to develop and test methods that are reliable, fast, and economical. Industrial participation will be encouraged from the outset to insure smooth transition from development phases to production phases. Initially, practice equipment for three meter bore circular coils will be developed. Oval shape coil forms will be included in the practice facility later. Equipment that is more automated will be developed with the expectation of winding faster and obtaining good coil quality. Alternate types of coil construction, methods of winding and insulating, will be investigated. Handling and assembly problems will be studied. All technology developed must be feasible for scaling up when much larger coils are needed. Experimental power reactors may need coils having six meter or larger bores

  20. Influence of Fabric Parameters on Thermal Comfort Performance of Double Layer Knitted Interlock Fabrics

    Afzal Ali

    2017-03-01

    Full Text Available The aim of this study was to analyse the effects of various fabric parameters on the thermal resistance, thermal conductivity, thermal transmittance, thermal absorptivity and thermal insulation of polyester/cotton double layer knitted interlock fabrics. It was found that by increasing fibre content with higher specific heat increases the thermal insulation while decreases the thermal transmittance and absorptivity of the fabric. It was concluded that double layer knitted fabrics developed with higher specific heat fibres, coarser yarn linear densities, higher knitting loop length and fabric thickness could be adequately used for winter clothing purposes.

  1. A facile fabrication of multifunctional knit polyester fabric based on chitosan and polyaniline polymer nanocomposite

    Tang, Xiaoning [College of Textiles, Qingdao University, Qingdao, Shandong 266071 (China); Laboratory of New Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, Shandong 266071 (China); Tian, Mingwei [College of Textiles, Qingdao University, Qingdao, Shandong 266071 (China); Laboratory of New Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, Shandong 266071 (China); Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao, Shandong 266071 (China); Qu, Lijun, E-mail: lijunqu@126.com [College of Textiles, Qingdao University, Qingdao, Shandong 266071 (China); Laboratory of New Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, Shandong 266071 (China); Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao, Shandong 266071 (China); Zhu, Shifeng [College of Textiles, Qingdao University, Qingdao, Shandong 266071 (China); Laboratory of New Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, Shandong 266071 (China); Guo, Xiaoqing [College of Textiles, Qingdao University, Qingdao, Shandong 266071 (China); Laboratory of New Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, Shandong 266071 (China); Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao, Shandong 266071 (China); Han, Guangting [Laboratory of New Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao, Shandong 266071 (China); Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao, Shandong 266071 (China); and others

    2014-10-30

    Highlights: • Multifunctional knit polyester fabric was facile fabricated by the combination of pad-dry-cure process and in situ chemical polymerization route. • High electrical conductivity and efficient water-repellent properties were endowed to the polymer nanocomposite coated fabric. • The polymer nanocomposite coated fabric also performed efficient and durable photocatalytic activities under the illumination of ultraviolet light. - Abstract: Knit polyester fabric was successively modified and decorated with chitosan layer and polyaniline polymer nanocomposite layer in this paper. The fabric was firstly treated with chitosan to form a stable layer through the pad-dry-cure process, and then the polyaniline polymer nanocomposite layer was established on the outer layer by in situ chemical polymerization method using ammonium persulfate as oxidant and chlorhydric acid as dopant. The surface morphology of coated fabric was characterized by scanning electron microscopy (SEM), and the co-existence of chitosan layer and granular polyaniline polymer nanocomposite was confirmed and well dispersed on the fabric surface. The resultant fabric was endowed with remarkable electrical conductivity properties and efficient water-repellent capability, which also have been found stable after water laundering. In addition, the photocatalytic decomposition activity for reactive red dye was observed when the multifunctional knit polyester fabric was exposed to the illumination of ultraviolet lamp. These results indicated that chitosan and polyaniline polymer nanocomposite could form ideal multifunctional coatings on the surface of knit polyester fabric.

  2. A facile fabrication of multifunctional knit polyester fabric based on chitosan and polyaniline polymer nanocomposite

    Tang, Xiaoning; Tian, Mingwei; Qu, Lijun; Zhu, Shifeng; Guo, Xiaoqing; Han, Guangting

    2014-01-01

    Highlights: • Multifunctional knit polyester fabric was facile fabricated by the combination of pad-dry-cure process and in situ chemical polymerization route. • High electrical conductivity and efficient water-repellent properties were endowed to the polymer nanocomposite coated fabric. • The polymer nanocomposite coated fabric also performed efficient and durable photocatalytic activities under the illumination of ultraviolet light. - Abstract: Knit polyester fabric was successively modified and decorated with chitosan layer and polyaniline polymer nanocomposite layer in this paper. The fabric was firstly treated with chitosan to form a stable layer through the pad-dry-cure process, and then the polyaniline polymer nanocomposite layer was established on the outer layer by in situ chemical polymerization method using ammonium persulfate as oxidant and chlorhydric acid as dopant. The surface morphology of coated fabric was characterized by scanning electron microscopy (SEM), and the co-existence of chitosan layer and granular polyaniline polymer nanocomposite was confirmed and well dispersed on the fabric surface. The resultant fabric was endowed with remarkable electrical conductivity properties and efficient water-repellent capability, which also have been found stable after water laundering. In addition, the photocatalytic decomposition activity for reactive red dye was observed when the multifunctional knit polyester fabric was exposed to the illumination of ultraviolet lamp. These results indicated that chitosan and polyaniline polymer nanocomposite could form ideal multifunctional coatings on the surface of knit polyester fabric

  3. Estudio sobre el estado nutricional, calidad de vida, y capacidad funcional en pacientes con fibromialgia. Estudio ENCAVI

    Arranz, Laura Isabel

    2012-01-01

    [spa] La fibromialgia es una enfermedad reumática, clasificada con el código OMS CIE-10- M79.7 (versión 2007), de carácter crónico que causa dolor muscular generalizado, rigidez, fatiga, alteraciones del sueño y trastornos cognitivos entre otros síntomas. La prevalencia en España está alrededor del 2.4%, aunque algunos estudios han situado esta cifra entorno al 4%, siendo las mujeres las que más la padecen, con gran diferencia respecto a los hombres. La fibromialgia, además, se presenta frecu...

  4. Contexto actual de los estudios preclínicos

    Thelvia I. Ramos

    2016-09-01

    Full Text Available El desarrollo acelerado de la Industria Biofarmacéutica, y en particular de la producción de biológicos, ha permitido el incremento de la investigación clínica, teniendo en consideración la novedad de las sustancias que se desarrollan. El éxito de un producto solo se logra a través de la realización de los estudios clínicos controlados, lo cual significa que este ha sido validado a través de un sistema de gestión de calidad, principal determinante para que la molécula en estudio, pueda ser autorizada y comercializada posterior a la demostración de su seguridad y eficacia. Previo a la presentación de una solicitud para un nuevo producto ante las autoridades regulatorias, es necesario pasar por la etapa de investigación preclínica.

  5. Viviendo en Flatland. El estudio comparado del crimen violento

    Luis David Ramírez de Garay

    2013-05-01

    Full Text Available Esta nota de investigación indaga sobre el notorio rezago que la criminología y la sociología del crimen tienen en la aplicación de la metodología comparada. A diferencia de la ciencia política y algunas áreas de la investigación sociológica, la metodología comparada no ocupa un lugar preponderante en la investigación empírica del crimen. Sin embargo, existen algunos valiosos ejemplos sobre las ventajas del estudio comparado del crimen y del crimen violento. Por ello, incluyo una breve revisión del estado actual de dichos estudios y de sus inherentes limitaciones teóricas y metodológicas. Finalmente, concluyo la nota presentando mi propuesta para incorporar la metodología comparada en la agenda de investigación sobre las bases sociales del crimen y del crimen violento

  6. ESTUDIO CINEANTROPOMÉTRICO DEL JUGADOR DE TENIS ADOLESCENTE

    Gema Torres Luque

    2006-01-01

    Full Text Available El propósito de este estudio fue aproximarse al perfil cineantropométrico de jugadores de tenis de edad adolescente. Para ello se seleccionaron 75 jugadores de tenis (47 varones y 26 mujeres a los cuales se les determinó el perfil antropométrico, composición corporal y somatotipo, mostrando a su vez las diferencias en cuanto al género. Todas las valoraciones se realizaron siguiendo las recomendaciones del Grupo Español de Cineantropometría, los tenistas fueron evaluados a la misma hora del día. Los resultados muestran diferencias significativamente mayores en los tenistas en peso, talla, perímetros bioestiloide y bicondíleo húmero, así como en diámetros en brazo contraído y perímetro del muslo y pierna. A su vez, las tenistas muestran un mayor porcentaje de grasa corporal y un menor porcentaje de masa ósea, no existiendo diferencias significativas respecto al porcentaje de masa muscular. El somatotipo marca una tendencia ecto mesomórfica para el género masculino, y una tendencia meso endomórfica para el género femenino. El estudio cineantropométrico del tenista adolescente permitirá una aproximación de referencia al perfil funcional del tenista y contribuir al máximo rendimiento deportivo.

  7. Estudio de inmunogenicidad para dos vacunas recombinantes contra hepatitis B

    O. Juliao

    1991-12-01

    Full Text Available Este estudio compara la inmunogenicidad (seroconversión, seroprotección e Hiperrespuesta, producida por dos vacunas recombinantes contra la hepatitis B (Engerix-B de Bélgica y Cubana, en dos esquemas (012 y 016 meses, empleando los métodos de cuantificación para Anti-HBsAg (Abbott y Organón, los cuales fueron también comparados. En el estudio participaron 257 voluntarios,  divididos al azar en 4 grupos (dos vacunas, dos esquemas. Resultados: los dos métodos de Abbon y Organon, no presentan diferencias estadísticas significativas. La vacuna cubana muestra una mayor respuesta inmunogénica para dos dosis de vacuna y para el esquema 012. No hay diferencia entre los esquemas 012 y 016 y en el esquema 016 no se ven diferencias estadísticamente significativas con la vacuna Engerix-B. En esta Última el esquema 016 muestra mejores resultados que el 012.

  8. Litiasis renal: estudio y manejo endocrinológico

    V. Gilberto González, Dr.

    2013-09-01

    Full Text Available La litiasis renal es causa de importante morbilidad y costo económico, afectando hasta el 15% de la población. Además, la litiasis renal puede ser expresión también de enfermedades extrarrenales, entre las cuales destaca riesgo aumentado de osteoporosis. Estudios nacionales muestran que las causas de litiasis renal en Chile son similares a las comunicadas internacionalmente, destacando la hipercalciuria idiopática como el principal factor de riesgo. A pesar de los avances en técnicas urológicas de remoción de cálculo, éstas no modifican la historia natural de la litiasis renal. Así, en los pacientes sin tratamiento médico, la recurrencia es la regla más que la excepción. En esta revisión se actualiza el estudio y manejo endocrinológico de la litiasis renal, para el cual la evidencia muestra que éste es eficaz y seguro en la prevención de recurrencia de litiasis renal y control de enfermedades asociadas, complementando así el manejo urológico de esta importante enfermedad.

  9. Preliminares al Estudio del Chancro y la Fusariosis del Cacao

    Garcés O. Carlos

    1939-08-01

    Full Text Available El presente estudio es el fruto de año y medio de investigaciones continuas, durante las cuales el autor ha pretendido recoger el máximum de observaciones personales que puede obtenerse cuando, a más de la deficiencia técnica y de laboratorio que ocurre en quienes se inician en Patología Vegetal, se dispone de medios que requiere habilidad y conocimientos profundos por parte del observador y considerable campo de experimentación. No hay por este motivo creación de doctrinas sino simplemente exposición de observaciones experimentales, que pueden estar erradas por deficiencia técnica, pero que se han efectuado con gran pulcritud de conciencia. El autor agradece sinceramente q quienes con voluntad inmejorable se prestaron a suministrarle toda clase de datos relacionados con este estudio y rinde homenaje de cordial reconocimiento al doctor Ramón Mejía Franco, constante propulsor de sus esfuerzos y guía seguro en la mayor parte de las experimentaciones.

  10. LIDERAZGO MULTICULTURAL: ESTUDIO COMPARATIVO INDIA-MÉXICO

    BERTA ERMILA MADRIGAL TORRES

    2017-01-01

    Full Text Available En este artículo se presenta un estudio de caso de una empresa donde colaboran directivos de dos culturas: México e India; se plantean preguntas de investigación como: ¿cuáles son los valores, actitudes y habilidades que ambas culturas esperan de sus líderes?, ¿cuáles son las habilidades del líder y sus estilos de liderazgo? y ¿cuál es la distancia y dimensión del poder de los líderes de ambas culturas? Se diseñó un instrumento con las cinco características de la descripción de la personalidad enumeradas por Goldberg (1990, la aproximación de estilo de liderazgo de Madrigal (2009, y dimensión de la incertidumbre y distancia del poder con la teoría de Northouse (2012. Para poder llevar a cabo este estudio se encuestaron a 102 directivos de cultura india y mexicana en diferentes aspectos relacionados con la percepción de liderazgo. Los resultados demuestran que tanto los mexicanos como los indios tienden a preferir un estilo de liderazgo democrático. Finalmente se presentan como hallazgos las diferencias existentes en el colectivismo institucional y en la orientación al futuro de ambas culturas.

  11. Heat Transfer in Directional Water Transport Fabrics

    Chao Zeng

    2016-10-01

    Full Text Available Directional water transport fabrics can proactively transfer moisture from the body. They show great potential in making sportswear and summer clothing. While moisture transfer has been previously reported, heat transfer in directional water transport fabrics has been little reported in research literature. In this study, a directional water transport fabric was prepared using an electrospraying technique and its heat transfer properties under dry and wet states were evaluated, and compared with untreated control fabric and the one pre-treated with NaOH. All the fabric samples showed similar heat transfer features in the dry state, and the equilibrium temperature in the dry state was higher than for the wet state. Wetting considerably enhanced the thermal conductivity of the fabrics. Our studies indicate that directional water transport treatment assists in moving water toward one side of the fabric, but has little effect on thermal transfer performance. This study may be useful for development of “smart” textiles for various applications.

  12. MAGNETIC WOVEN FABRICS - PHYSICAL AND MAGNETIC PROPERTIES

    GROSU Marian C

    2015-05-01

    Full Text Available A coated material is a composite structure that consists of at least two components: base material and coating layer. The purpose of coating is to provide special properties to base material, with potential to be applied in EMI shielding and diverse smart technical fields. This paper reports the results of a study about some physical and magnetic properties of coated woven fabrics made from cotton yarns with fineness of 17 metric count. For this aim, a plain woven fabric was coated with a solution hard magnetic polymer based. As hard magnetic powder, barium hexaferrite (BaFe12O19 was selected. The plain woven fabric used as base has been coated with five solutions having different amounts of hard magnetic powder (15% - 45% in order to obtain five different magnetic woven fabrics. A comparison of physical properties regarding weight (g/m2, thickness (mm, degree of charging (% and magnetic properties of magnetic woven samples were presented. Saturation magnetizing (emu/g, residual magnetizing (emu/g and coercive force (kA/m of pure hard magnetic powder and woven fabrics have been studied as hysteresis characteristics. The magnetic properties of the woven fabrics depend on the mass percentage of magnetic powder from coating solution. Also, the residual magnetism and coercive field of woven fabrics represents only a part of bulk barium hexafferite residual magnetism and coercive field.

  13. Materials for microfluidic chip fabrication.

    Ren, Kangning; Zhou, Jianhua; Wu, Hongkai

    2013-11-19

    Through manipulating fluids using microfabricated channel and chamber structures, microfluidics is a powerful tool to realize high sensitive, high speed, high throughput, and low cost analysis. In addition, the method can establish a well-controlled microenivroment for manipulating fluids and particles. It also has rapid growing implementations in both sophisticated chemical/biological analysis and low-cost point-of-care assays. Some unique phenomena emerge at the micrometer scale. For example, reactions are completed in a shorter amount of time as the travel distances of mass and heat are relatively small; the flows are usually laminar; and the capillary effect becomes dominant owing to large surface-to-volume ratios. In the meantime, the surface properties of the device material are greatly amplified, which can lead to either unique functions or problems that we would not encounter at the macroscale. Also, each material inherently corresponds with specific microfabrication strategies and certain native properties of the device. Therefore, the material for making the device plays a dominating role in microfluidic technologies. In this Account, we address the evolution of materials used for fabricating microfluidic chips, and discuss the application-oriented pros and cons of different materials. This Account generally follows the order of the materials introduced to microfluidics. Glass and silicon, the first generation microfluidic device materials, are perfect for capillary electrophoresis and solvent-involved applications but expensive for microfabriaction. Elastomers enable low-cost rapid prototyping and high density integration of valves on chip, allowing complicated and parallel fluid manipulation and in-channel cell culture. Plastics, as competitive alternatives to elastomers, are also rapid and inexpensive to microfabricate. Their broad variety provides flexible choices for different needs. For example, some thermosets support in-situ fabrication of

  14. Estudio epidemiológico de salud oral en adultos. Comunidad Valenciana, 2006

    Eustaquio Raga, Mª Vicenta

    2008-01-01

    RESUMEN En las últimas dos décadas se han venido realizando estudios epidemiológicos de salud oral en adultos en las diferentes comunidades autónomas españolas. Así la ausencia de dicho estudio de ámbito autonómico valenciano justifica plenamente su realización. En la realización del presente estudio nos hemos propuesto como objetivo general el evaluar el estado de salud bucodental de la población adulta y mayor de la Comunidad Valenciana. Se ha diseñado un estudio transversal o de p...

  15. Fabrication of seamless calandria tubes

    Saibaba, N.; Phanibabu, C.; Bhaskara Rao, C.V.; Kalidas, R.; Ganguly, C.

    2002-01-01

    Full text: Calandria tube is a large diameter, thin walled zircaloy-4 tube and is an important structural component of PHWR type of reactors. These tubes are lifetime components and remain during the full life of the reactor. Calandria tubes are classified as extremely thin walled tubes with a diameter to wall thickness ratio of around 96. Such thin walled tubes are conventionally produced by seam welded route comprising of extrusion of slabs followed by a series of hot and rolling passes, shaping into O-shape and eventual welding. An alternative and superior method of fabricating the calandria tubes, the seamless route, has been developed, which involves hot extrusion of mother blanks followed by three successive cold pilger reductions. Eccentricity correction of the extruded blanks is carried out on a special purpose grinding equipment to bring the wall thickness variation within permissible limits. Predominant wall thickness reductions are given during cold pilgering to ensure high Q-factor values. The texture in the finished tubes could be closely, controlled with an average f r value of 0.65. Pilgering parameters and tube guiding system have been specially designed to facilities rolling of thin walled tubes. Seamless calandria tubes have distinct advantages over welded tubes. In addition to the absence of weld, they are dimensionally more stable, lighter in weight and possess uniform grains with superior grain size. The cycle time from billet to finished product is substantially reduced and the product is amenable to high level of quality assurance. The most significant feature of the seamless route is its material recovery over welded route. Residual stresses measured in the tubes indicate that these are negligible and uniform along the length of the tube. In view of their superior quality, the first charge of seamless calandria tubes will be rolled into the first 500 MWe Pressurised Heavy Water Reactor at Tarapur

  16. Progress on KMRR fuel fabrication

    Kuk, I.H.; Lee, J.B.; Rhee, C.K.; Kim, K.W.

    1991-01-01

    In order to increase the practical applicability of powder heat-treatment in KMRR fuel fabrication, efforts were made to reduce the critical size. Primary U 3 Si 2 particle size was reviewed in terms of cooling rate. Temperature dependence of peritectoid reaction was reviewed as well. (1) Cooling rate of U 3 Si molten alloy was calculated by ADINA program. In practice, particle size of the primary U 3 Si 2 varies radially. U 3 Si 2 size increases as it goes deeper from the surface. As cooling rate increases, primary U 3 Si 2 size decreases. (2) Peritectoid reaction occurs in two unique groups of temperature; one is below 790 C where β-U and U 3 Si 2 reaction occurs, and the other above 790 C where γ-U and U 3 Si 2 reaction occurs. 780 C is most completely reacting temperature in β-U region, and 810 C is so in γ-U region. Reaction is completed more perfectly in γ-U region than in β-U region. 810 C is found to be the optimized heat-treatment temperature, but it is desirable not to approach to 790 C in heat-treatment. (3) The critical powder size in powder heat-treatment is dependent on the primary U 3 Si 2 particle size. The smaller the primary U 3 Si 2 particle size, the smaller the critical particle size of the powder. At present, the primary U 3 Si 2 particle size can be reduced to 3∝5 μm at 4∝5 mm deep from surface in Cu mold. This may be reduced further by rapid solidification process. (orig.)

  17. Overview of MOX fuel fabrication achievements

    Bairiot, H.; Vliet, J. van; Chiarelli, G.; Edwards, J.; Nagai, S.H.; Reshetnikov, F.

    2000-01-01

    Such overview having been adequately covered in an OECD/NEA publication providing the situation as of end 1994, this paper is mainly devoted to an update as of end 1998. The Belgian plant, Belgonucleaire/Dessel, is now dedicated exclusively to the fabrication of MOX fuel and has operated consistently around its nameplate capacity (35tHM/a) through the 1990s involving a large variety of PWR and BWR fuels. The two French plants have also achieved routine operation during the 1990s. CFCa, historically the largest FBR MOX fuel manufacturer, is utilizing the genuine COCA process for that type of fuel and the MIMAS process for LWR fuel: a nominal capacity (40 tHM/a) has been gradually approached. MELOX has operated at 100 tHM/a, as defined in the operating licence granted originally. The British plant, MDF/Sellafield with 8tHM/a nameplate capacity is devoted to fuel and has manufactured several small fabrication campaigns. In Japan, JNC operates three facilities located at Tokai: PFDF, devoted to basic research and fabrication of test fuels, PFFF/ATR line, for the fabrication of Fugen fuel and of corresponding fuel for the critical facility DCA, and PFPF for the fabrication of FBR fuel. In Russia, fabrication techniques have been developed to fuel four BN-800 FBRs contemplated to be constructed and be fuelled with the civilian Pu stockpile. Two demonstration facilities Paket (Mayak) and RIAR (Dimitrovgrad) fabricated respectively pellet and vipac type FBR MOX fuel for BR-5, BOR-60, BN-350 and BN-600. The paper includes a brief description of each of the fabrication routes mentioned, as well as the production of respectively LWR and FBR MOX fuel in each fabrication facility, since the start-up of the plant, since 1 January 1993 and since 1 January 1998 up to 31 December 1998. (author)

  18. Superamphiphobic cotton fabrics with enhanced stability

    Xu, Bi, E-mail: xubi@dhu.edu.cn [National Engineering Research Center for Dyeing and Finishing of Textiles, Donghua University, Shanghai 201620 (China); Key Laboratory of Science & Technology of Eco-Textile, Ministry of Education, Donghua University, Shanghai 201620 (China); College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620 (China); Ding, Yinyan; Qu, Shaobo [College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620 (China); Cai, Zaisheng, E-mail: zshcai@dhu.edu [College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai 201620 (China)

    2015-11-30

    Highlights: • Superamphiphobic cotton fabrics were prepared. • Water and hexadecane contact angels reach to 164.4° and 156.3°, respectively. • Nanoporous organically modified silica alcogel particles were synthesized. • The superamphiphobic cotton fabrics exhibit enhanced stability against abrasion, laundering and acid. - Abstract: Superamphiphobic cotton fabrics were prepared by alternately depositing organically modified silica alcogel (ormosil) particles onto chitosan precoated cotton fabrics and subsequent 1H, 1H, 2H, 2H-perfluorooctyltrimethoxysilane (PFOTMS) modification. Transmission electron microscopy and scanning electron microscopy images reveal that the ormosil particles display a fluffy, sponge-like nanoporous structure, and the entire cotton fiber surface is covered with highly porous networks. PFOTMS acts as not only a modifier to lower the surface energy of the cotton fabric but also a binder to enhance the coating stability against abrasion and washing. The treated cotton fabrics show highly liquid repellency with the water, cooking oil and hexadecane contact angels reaching to 164.4°, 160.1° and 156.3°, respectively. Meanwhile, the treated cotton fabrics exhibit good abrasion resistance and high laundering durability, which can withstand 10,000 cycles of abrasion and 30 cycles of machine wash without apparently changing the superamphiphobicity. The superamphiphobic cotton fabric also shows high acid stability, and can withstand 98% H{sub 2}SO{sub 4}. Moreover, the superamphiphobic coating has almost no influence on the other physical properties of the cotton fabrics including tensile strength, whiteness and air permeability. This durable non-wetting surface may provide a wide range of new applications in the future.

  19. Laser-assisted fabrication of materials

    Manna, Indranil

    2013-01-01

    Laser assisted fabrication involves shaping of materials using laser as a source of heat. It can be achieved by removal of materials (laser assisted cutting, drilling, etc.), deformation (bending, extrusion), joining (welding, soldering) and addition of materials (surface cladding or direct laser cladding). This book on ´Laser assisted Fabrication’ is aimed at developing in-depth engineering concepts on various laser assisted macro and micro-fabrication techniques with the focus on application and a review of the engineering background of different micro/macro-fabrication techniques, thermal history of the treated zone and microstructural development and evolution of properties of the treated zone.

  20. Silicon fabric for multi-functional applications

    Sevilla, Galo T.; Rojas, Jhonathan Prieto; Ahmed, Sally; Hussain, Aftab M.; Inayat, Salman Bin; Hussain, Muhammad Mustafa

    2013-01-01

    This paper reports a generic process flow to fabricate mechanically flexible and optically semi-transparent thermoelectric generators (TEGs), micro lithium-ion batteries (μLIB) and metal-oxide-semiconductor capacitors (MOSCAPs) on mono-crystalline silicon fabric platforms from standard bulk silicon (100) wafers. All the fabricated devices show outstanding mechanical flexibility and performance, making an important step towards monolithic integration of Energy Chip (self-powered devices) including energy harvesters and electronic devices on flexible platforms. We also report a recyclability process for the remaining bulk substrate after release, allowing us to achieve a low cost flexible platform for high performance applications. © 2013 IEEE.

  1. Fabricating solid carbon porous electrodes from powders

    Kaschmitter, James L.; Tran, Tri D.; Feikert, John H.; Mayer, Steven T.

    1997-01-01

    Fabrication of conductive solid porous carbon electrodes for use in batteries, double layer capacitors, fuel cells, capacitive dionization, and waste treatment. Electrodes fabricated from low surface area (Electrodes having a higher surface area, fabricated from powdered carbon blacks, such as carbon aerogel powder, carbon aerogel microspheres, activated carbons, etc. yield high conductivity carbon compositives with excellent double layer capacity, and can be used in double layer capacitors, or for capacitive deionization and/or waste treatment of liquid streams. By adding metallic catalysts to be high surface area carbons, fuel cell electrodes can be produced.

  2. Silicon fabric for multi-functional applications

    Sevilla, Galo T.

    2013-06-01

    This paper reports a generic process flow to fabricate mechanically flexible and optically semi-transparent thermoelectric generators (TEGs), micro lithium-ion batteries (μLIB) and metal-oxide-semiconductor capacitors (MOSCAPs) on mono-crystalline silicon fabric platforms from standard bulk silicon (100) wafers. All the fabricated devices show outstanding mechanical flexibility and performance, making an important step towards monolithic integration of Energy Chip (self-powered devices) including energy harvesters and electronic devices on flexible platforms. We also report a recyclability process for the remaining bulk substrate after release, allowing us to achieve a low cost flexible platform for high performance applications. © 2013 IEEE.

  3. Fabrication of biopolymer cantilevers using nanoimprint lithography

    Keller, Stephan Sylvest; Feidenhans'l, Nikolaj Agentoft; Fisker-Bødker, Nis

    2011-01-01

    The biodegradable polymer poly(l-lactide) (PLLA) was introduced for the fabrication of micromechanical devices. For this purpose, thin biopolymer films with thickness around 10 μm were spin-coated on silicon substrates. Patterning of microcantilevers is achieved by nanoimprint lithography. A major...... challenge was the high adhesion between PLLA and silicon stamp. Optimized stamp fabrication and the deposition of a 125 nm thick fluorocarbon anti-stiction coating on the PLLA allowed the fabrication of biopolymer cantilevers. Resonance frequency measurements were used to estimate the Young’s modulus...

  4. Design, fabrication and installation of irradiation facilities

    Sim, Bong Shick; Kim, Y. S.; Lee, C. Y. and others

    1999-03-01

    The principal contents of this project are to design, fabricate and install the steady-state fuel test loop in HANARO for nuclear technology development. Procurement and fabrication of main equipment, licensing and technical review for fuel test loop have been performed during 2 years(1997, 1998) for this project. Following contents are described in the report. - Procurement and fabrication of the equipment, piping for OPS - IPS manufacture - License - Technical review and evaluation of the FTL facility. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and review ofHANARO interface have been performed respectively. (author)

  5. Toward an Active Fabric-Based Air Decontamination System

    Gaddy, G. A; Bratcher, Matthew S; Mills, G; Huang, S; Slaten, B. L; Debortoli, J

    2004-01-01

    ...) particles that were grafted on cotton fabric and on TiO2 particles that were embedded in glass fabric Modified TiO2 particles were grafted onto cotton fabric and irradiated in the presence of CHCl3...

  6. Estudio del impacto ambiental de medicamentos de control especial en Bogotá, Colombia. Caso de estudio: Lorazepam

    Ibeth Eileen López

    2016-01-01

    Full Text Available El aumento de la población y la cobertura de los sistemas de salud, así como el crecimiento del mercado farmacéutico, ha dado lugar a la presencia de una nueva generación de residuos peligrosos, que no habían sido considerados como tal. En Colombia, no se han realizado suficientes estudios relacionados con el impacto ambiental ocasionado por la disposición final de medicamentos, porque no existen cifras disponibles acerca de la cantidad depositada diariamente en rellenos sanitarios, destruida en plantas gestoras de residuos peligrosos o encontrada en plantas de tratamiento de aguas residuales. Se encontró en esta investigación que sólo en Bogotá, se destruyen en promedio anualmente 9.310.123 unidades farmacéuticas de productos de control especial, sin considerar las unidades desechadas a nivel doméstico. Para estudiar el impacto ambiental, se seleccionó el principio activo lorazepam, la información sobre la cantidad del medicamento consumida y destruida en plantas gestoras de residuos peligrosos en la ciudad de Bogotá, durante los años 2012 y 2013, fue aportada por el Fondo Nacional de Estupefacientes. Los datos fueron evaluados utilizando la matriz de Leopold, software especializado y ensayos de laboratorio complementarios. Este estudio pretende sensibilizar a fabricantes, prescriptores y pacientes sobre la responsabilidad ambiental en el uso de medicamentos de control especial.

  7. Fabric Reconstruction Based on Sustainable Development: Take the Type of Fabric Recycling as an Example

    Zhangting Guan

    2017-07-01

    Full Text Available Sustainable development is a very important concept of our time, it wants to do is to live in harmony with people, to protect the environment where our human survival. Fabric recycling refers to the use of a variety of traditional and high-tech means of the existing fabric fabric design and processing. So that the surface of a rich visual texture and tactile texture "through the fabric recycling approach. However, the fabric form and clothing design coordination between the clothing design is essential to the link! Garment fabric is not only the material basis of clothing modeling But also an important form of plastic arts. Fabric recycling art has gradually become a new breakthrough point of fashion design! And become an important means to increase the added value of clothing products. But at the same time fabric recycling also follow the concept of sustainable development. This paper analyzes the relationship between fabric reengineering and sustainable development. Combined with practice to explore the fabric processing technology and its creative ideas and some of its environmental performance.

  8. Optimum processing parameters for the fabrication of twill flax fabric-reinforced polypropylene (PP) composites

    Zuhudi, Nurul Zuhairah Mahmud; Minhat, Mulia; Shamsuddin, Mohd Hafizi; Isa, Mohd Dali; Nur, Nurhayati Mohd

    2017-12-01

    In recent years, natural fabric thermoplastic composites such as flax have received much attention due to its attractive capabilities for structural applications. It is crucial to study the processing of flax fabric materials in order to achieve good quality and cost-effectiveness in fibre reinforced composites. Though flax fabric has been widely utilized for several years in composite applications due to its high strength and abundance in nature, much work has been concentrated on short flax fibre and very little work focused on using flax fabric. The effectiveness of the flax fabric is expected to give higher strength performance due to its structure but the processing needs to be optimised. Flax fabric composites were fabricated using compression moulding due to its simplicity, gives good surface finish and relatively low cost in terms of labour and production. Further, the impregnation of the polymer into the fabric is easier in this process. As the fabric weave structure contributes to the impregnation quality which leads to the overall performance, the processing parameters of consolidation i.e. pressure, time, and weight fraction of fabric were optimized using the Taguchi method. This optimization enhances the consolidation quality of the composite by improving the composite mechanical properties, three main tests were conducted i.e. tensile, flexural and impact test. It is observed that the processing parameter significantly affected the consolidation and quality of composite.

  9. Estudio de Recursos Humanos del Sector Salud en Colombia.

    Gustavo Malagón Londoño

    1997-12-01

    Full Text Available

    Antecedentes


    Siendo el recurso humano el en cargado de movilizar los demás recursos e impulsarlos de tal manera que conlleve a una dinámica de producción masiva de bienes o servicios, su estudio para llegar a una identificación real, categorización, clasificación; es necesario en cualquier área del conocimiento.

    Frente al nuevo esquema de prestación de servicios propuestos, los profesionales de la salud han perdido aquella posición digna, de respeto y liderazgo dentro del sistema y dentro de su entorno social, lo cual ha llevado a muchos de ellos a desertar de sus oficios originales, con lo cual se llega a la falla en la instauración del Sistema.

    Así mismo la Ley 100 de 1993 que debió ser vista como una nueva oportunidad de negocios dentro de las diferentes profesiones de la salud, se transformó en una seria amenaza para el ejercicio independiente de cada profesión.

    No es apropiado ni satisfactorio dejar un proceso decisorio de tal magnitud en manos de otros sectores que únicamente verán y obtendrán estadísticas del acceso de la población colombiana a estudios superiores y los renglones en los cuales quieren desempeñarse y se desempeñarán en un futuro. El sector de la salud debe tomar un claro papel protagónico frente a la promulgación de políticas de formación y utilización de su recurso humano.

    La Academia Nacional de Medicina consciente del vacío existente en el sector con respecto al tema, ha querido desde su posición estratégica con respecto a las profesiones del área y las universidades, liderar un proceso que conlleve a la organización de un Estudio del recurso humano del Sector Salud en Colombia, tomando como punto de partida el censo de los trabajadores de la salud en todas las áreas, de tal manera que se identifique su disponibilidad, su capacidad, la ubicación, las facilidades laborales en zonas aisladas y su grado de satisfacción, entre otras

  10. Fabrication Process Development for Light Deformable Mirrors

    National Aeronautics and Space Administration — The project objective is to develop robust, reproductibble fabrication processes to realize functional deformable membrane mirrors (DM) for a space mission in which...

  11. Impediments for Digital Fabrication in Education

    Smith, Rachel Charlotte; Iversen, Ole Sejer; Veerasawmy, Rune

    2016-01-01

    with eight primary and lower secondary teachers, the findings point to four central impediments for integrating digital fabrication and design into school environments. The findings extend current perceptions of digital technology in education towards exploratory processes of investigation in which......Digital fabrication technologies are increasingly integrated across subjects in primary and secondary education. Focus on the potentials of these technologies has mainly been on the support to STEM oriented learning goals, while emphasis on teachers' roles with the new learning processes...... of technology and design is largely absent. The paper addresses the experiences and challenges that digital fabrication technology present for teachers in educational environments, and the impediments that are linked to the teachers' roles in design processes of digital fabrication. Based on a research study...

  12. Laminate mechanics for balanced woven fabrics

    Akkerman, Remko

    2006-01-01

    Laminate mechanics equations are presented for composites with balanced woven fabric reinforcements. It is shown that mimicking these textile composites with equivalent transversely isotropic (‘unidirectional’) layers requires disputable manipulations. Various micromechanics predictions of textile

  13. Fabrication of thick superconducting films by decantation

    Julián Betancourt M.

    1991-07-01

    Full Text Available We have found superconducting behavior in thick films fabricated by decantation. In this paper we present the experimental method and results obtained using commercial copper substrates.

  14. Natural fabric sandwich laminate composites: development and ...

    3Department of Production Technology, MIT Campus, Anna University, Chennai 600044, India. MS received ... In this work, eco-friendly natural fabric sandwich laminate (NFSL) composites are formulated using ... and eco-friendly quality [22].

  15. Semiconductors detectors: basics principals, fabrication and repair

    Souza Coelho, L.F. de.

    1982-05-01

    The fabrication and repairing techniques of semiconductor detectors, are described. These methods are shown in the way they are applied by the semiconductor detector laboratory of the KFA-Julich, where they have been developed during the last 15 years. The history of the semiconductor detectors is presented here, being also described the detector fabrication experiences inside Brazil. The key problems of manufacturing are raised. In order to understand the fabrication and repairing techniques the working principles of these detectors, are described. The cases in which worked during the stay in the KFA-Julich, particularly the fabrication of a plane Ge (Li) detector, with side entry, and the repair of a coaxial Ge (Li) is described. The vanguard problems being researched in Julich are also described. Finally it is discussed a timetable for the semiconductor detector laboratory of the UFRJ, which laboratory is in the mounting stage now. (Author) [pt

  16. Flexible Thermoelectric Generators on Silicon Fabric

    Sevilla, Galo T.

    2012-01-01

    In this work, the development of a Thermoelectric Generator on Flexible Silicon Fabric is explored to extend silicon electronics for flexible platforms. Low cost, easily deployable plastic based flexible electronics are of great interest for smart

  17. Diffractive optics: design, fabrication, and test

    O'Shea, Donald C

    2004-01-01

    This book provides the reader with the broad range of materials that were discussed in a series of short courses presented at Georgia Tech on the design, fabrication, and testing of diffractive optical elements (DOEs...

  18. Fabrication of LD-3 Polymer Directional Couplers

    Chen, Ray T

    1998-01-01

    .... LD-3 polymer directional couplers arc designed and fabricated to operate at 1.3 microns. Waveguide propagation losses, device characterization, demonstration of cross coupling and packaged device pictures are presented in this final report.

  19. Fabrication of 3D Silicon Sensors

    Kok, A.; Hansen, T.E.; Hansen, T.A.; Lietaer, N.; Summanwar, A.; /SINTEF, Oslo; Kenney, C.; Hasi, J.; /SLAC; Da Via, C.; /Manchester U.; Parker, S.I.; /Hawaii U.

    2012-06-06

    Silicon sensors with a three-dimensional (3-D) architecture, in which the n and p electrodes penetrate through the entire substrate, have many advantages over planar silicon sensors including radiation hardness, fast time response, active edge and dual readout capabilities. The fabrication of 3D sensors is however rather complex. In recent years, there have been worldwide activities on 3D fabrication. SINTEF in collaboration with Stanford Nanofabrication Facility have successfully fabricated the original (single sided double column type) 3D detectors in two prototype runs and the third run is now on-going. This paper reports the status of this fabrication work and the resulted yield. The work of other groups such as the development of double sided 3D detectors is also briefly reported.

  20. Flame retardant treatments of PBI fabric.

    Temin, S. C.

    1972-01-01

    Fabrics knitted or woven from polybenzimidazole (PBI) fibers were treated to reduce flammability in oxygen atmospheres, particularly that of 5 psia oxygen. Bromination to approximately 15% weight gain of such fabrics led to markedly lower burning rates; samples brominated to over 80% weight gain were self-extinguishing in 5 psia oxygen. The loss in tensile strength of fabrics due to bromination was negligible although shrinkage was observed. Free fibers showed negligible losses on bromination. Treatment of PBI fabric with organophosphorus compounds also achieved self-extinguishing character in 5 psia oxygen but the enhanced flameproofing was largely lost on leaching. Reaction with POCl3 in pyridine led to a permanent reduction in flammability.

  1. Fabricating plasmonic components for nano-and meta-photonics

    Boltasseva, Alexandra; Nielsen, Rasmus Bundgaard; Jeppesen, Claus

    2009-01-01

    Different fabrication approaches for realization of metal-dielectric structures supporting propagating and localized surface plasmons are described including fabrication of nanophotonic waveguides and plasmonic nanoantennae....

  2. The quality challenge for fuel fabrication

    Lannegrace, J.-P.

    1990-01-01

    Fuel fabrication is a key segment of the nuclear fuel cycle, since safe and economic operation of reactors is highly dependent on the quality of the fuel. Achieving and controlling quality is, therefore, of paramount importance to fuel fabricators dominating nearly every aspect of the business. The quality policy, concepts and assurance system at three French plants are outlined. The need for integrated inspection, process optimization and good employee motivation is stressed. (author)

  3. Interfacing robotics with plutonium fuel fabrication

    Bowen, W.W.; Moore, F.W.

    1986-01-01

    Interfacing robotic systems with nuclear fuel fabrication processes resulted in a number of interfacing challenges. The system not only interfaces with the fuel process, but must also interface with nuclear containment, radiation control boundaries, criticality control restrictions, and numerous other safety systems required in a fuel fabrication plant. The robotic system must be designed to allow operator interface during maintenance and recovery from an upset as well as normal operations

  4. FBR pellet fabrication - density and dimensional control

    Rasmussen, D.E.; Schaus, P.S.

    1982-01-01

    The fuel pellet fabricating experience described in this paper involved pellet processing tests using mixed oxide (PuO 2 -UO 2 ) powders to produce fast breeder reactor (FBR) fuel pellets. Objectives of the pellet processing tests were to establish processing parameters for sintered-to-size fuel pellets to be used in an irradiation test in the Fast Flux Test Facility and to establish baseline fabrication control information. 26 figures, 7 tables

  5. Fabrication of Polymer Optical Fibre (POF Gratings

    Yanhua Luo

    2017-03-01

    Full Text Available Gratings inscribed in polymer optical fibre (POF have attracted remarkable interest for many potential applications due to their distinctive properties. This paper overviews the current state of fabrication of POF gratings since their first demonstration in 1999. In particular we summarize and discuss POF materials, POF photosensitivity, techniques and issues of fabricating POF gratings, as well as various types of POF gratings.

  6. Fabrication of off-axis parabolic mirrors

    Bezik, M.J.; Gerth, H.L.; Sladky, R.E.; Washington, C.A.

    1978-08-01

    The report describes the fabrication process, including metal preparation, copper electroplating, single-crystal-diamond turning, optical inspection, and polishing, used to manufacture the focusing mirrors for the 10-kJ laser fusion experiment being conducted by the Los Alamos Scientific Laboratory. Fabrication of these mirrors by the techniques described resulted in diffraction-limited optics at a 10.6 μm wavelength

  7. Silver Nanowire Arrays : Fabrication and Applications

    Feng, Yuyi

    2016-01-01

    Nanowire arrays have increasingly received attention for their use in a variety of applications such as surface-enhanced Raman scattering (SERS), plasmonic sensing, and electrodes for photoelectric devices. However, until now, large scale fabrication of device-suitable metallic nanowire arrays on supporting substrates has seen very limited success. This thesis describes my work rst on the development of a novel successful processing route for the fabrication of uniform noble metallic (e.g. A...

  8. Quality assurance in the fuel fabrication

    Darmayan, P.

    1995-01-01

    The paper concentrates on the evolutions that FBFC Franco Belge de Fabrication de Combustible has initiated in order to make a further step in improving quality: 1. Improving each personnel's involment and responsability towards quality. 2. Incorporating quality assurance in a total quality management policy, involving both the fabrication teams of FBFC and the design teams of Framatome in order to improve quality. (orig./HP)

  9. Fabrication and Multiprobe Electrical Characterization of Nanostructures

    Klarskov, Mikkel Buster

    2013-01-01

    techniques, such as colloidal lithography or block copolymers lithography, which covers the entire sample. This project presents graphene devices with periodic holes fabricated by electron beam lithography. Only partial coverage of holes are fabricated by making from one to many rows of holes perpendicular......, such as nanograss and silver nanowires. Furthermore, antidot lattice of dierent sizes are made in graphene, to investigating the dependence of number of holes needed for modifying the electronic properties of graphene....

  10. Fabrication of ion source components by electroforming

    Schechter, D.E.; Sluss, F.

    1983-01-01

    Several components of the Oak Ridge National Laboratory (ORNL)/Magnetic Fusion Test Facility (MFTF-B) ion source have been fabricated utilizing an electroforming process. A procedure has been developed for enclosing coolant passages in copper components by electrodepositing a thick (greater than or equal to 0.75-mm) layer of copper (electroforming) over the top of grooves machined into the copper component base. Details of the procedure to fabricate acceleration grids and other ion source components are presented

  11. Antes de los Estudios Culturales. Robert Warshow y la experiencia

    Antonio Lastra

    2008-01-01

    Full Text Available Este artículo estudia la influencia del concepto de experiencia que desarrolla Robert Warshow. Warshow ha supuesto el contrapunto americano a las teorías desarrolladas por Walter Benjamien en Europa. Si bien ambos insistieron en la pobreza de la experiencia, como resultado de la tecnificación de la sociedad, Warshow supo introducir matizaciones que influyeron en todo el círculo de intelectuales concentrados en Nueva York durante la etapa de consolidación de los Estudios Culturales. This paper studies the influence of the experience concept by Robert Warshow. Warshow is the American counterpoint to theories developed by Walter Benjamin in Europe. Although both insisted in the poverty of experience, as a result of technique, Warshow knew how to introduce nuances that influenced intellectuals in New York as Cultural Studies emerged.

  12. Tiempo de Respuestas y Experiencia de Usuario Estudio Experimental

    Delvis Echeverria

    2016-12-01

    Full Text Available La investigación está fundamentada por un estudio experimental, enfocado en la evaluación del comportamiento de los usuarios finales interactuando con tiempos de respuestas en aplicaciones reales. Se tomará como base el aporte de los autores Doherty y Thadani, investigadores de IBM relacionado con los tiempos de respuestas, y las investigaciones de Jacob Nielsen. Se llevarán a cabo un test con usuarios finales, y se expondrán optimizaciones a través de del uso de herramientas que contribuirán a mejorar los tiempos de respuestas de las aplicaciones web. Todo esto engloba una primera instancia de un proyecto que se está llevando a cabo en la empresa GeneXus Consulting, pretendiéndose lograr un punto de encuentro entre el rendimiento de las aplicaciones y la experiencia de usuario.

  13. Primeros resultados sobre el estudio de oscilaciones no radiales

    Córsico, A.; Benvenuto, O. G.

    En el Observatorio de La Plata se ha comenzado a elaborar un código de pulsaciones el cual resuelve el problema de las oscilaciones no radiales en el caso adiabático. Dicho código está basado en la técnica de diferencias finitas ampliamente usado en cálculos de estructura y evolución estelar. En este trabajo se presentan los primeros resultados encontrados aplicando el código mencionado al caso de una polítropa de índice n=3. Se presentan los valores de las autofrecuencias y las autofunciones para diferentes modos de pulsación de dicha configuración politrópica. En un futuro próximo, se aplicará este programa al estudio de las pulsaciones no radiales de estrellas enanas blancas.

  14. Estudios inmunologicos en hamsters (Cricetus auratus infectados con Schistosoma mansoni

    Eduardo Monge

    1986-08-01

    Full Text Available Los resultados de este trabajo muestran que el hamster (Cricetus auratus puede ser utilizado como un modelo experimental para estudios inmunológicos en la infección por Schistosoma mansoni. Los datos obtenidos, relativos a inmunidad concomitante, producción de anticuerpo letal e inmunosupresión se asemejan a los conseguidos en otros modelos experimentales ya establecidos. Estas observaciones indican que el hámster, además de ser un hospedero satisfactorio para el mantenimiento del parásito en el laboratorio, puede ser considerado como un modelo experimental alterno cuyo crecimiento y mantenimiento son relativamente simples y además es un animal de fácil manejo.

  15. Gordailu, Centro de Patrimonio Cultural Mueble de Gipuzkoa. Estudios previos

    Maite Barrio Olano

    2009-08-01

    Full Text Available La Diputación Foral de Gipuzkoa ha impulsado la creación de una nueva infraestructura cultural: el Centro de Patrimonio Cultural Mueble de Gipuzkoa, denominado Gordailu (palabra en euskera cuyo significado es “depósito”. Este Centro tendrá como misión la gestión integral del patrimonio cultural mueble del territorio, partiendo de un núcleo central, el depósito in situ de colecciones de distinta titularidad. Dentro de la variedad de temas de estudio y análisis que implica un proyecto de esta envergadura, en el presente artículo se relatan los relativos al plan de necesidades, evaluación de colecciones y definición de condiciones medioambientales.

  16. Estudio multifrecuencia del medio interestelar cercano a HD 192281

    Arnal, E. M.; Cappa, C.; Cichowolski, S.; Pineault, S.; St-Louis, N.

    Una de las causas que modifica la estructura y dinámica del medio interestelar es la acción que los vientos de las estrellas de gran masa ejercen sobre el mismo. En este trabajo, mediante el uso de datos interferométricos obtenidos en la banda de radio en la transición de 21-cm del Hidrógeno neutro y de imágenes de la emisión de continuo en las bandas de 408 y 1420 MHz, de imágenes HIRES del satélite IRAS en 60 y 100 micrones, y de observaciones de continuo obtenidas con radiotelescopios de disco simple en 2695, 4850 y 8350 MHz se ha realizado un estudio multifrecuencia de los efectos que los vientos estelares de HD 192281, una estrella de tipo espectral O5 Vn((f))p, han tenido sobre el medio interestelar que rodea a la misma.

  17. El abandono en las etapas iniciales de los estudios superiores

    Norma Zandomeni

    2016-01-01

    Full Text Available En este artículo se presenta una investigación sobre abandono de los estudios superiores realizada en una universidad argentina. Con un abordaje metodológico cuanti-cualitativo, se analizan datos secundarios y se recupera la perspectiva de distintos actores mediante talleres, encuestas y entrevistas. Se aborda el abandono que se produce en el proceso del ingreso y el generado en los dos primeros años, tanto en su cuantificación como en los factores que operan en el mismo. En el primer caso el abandono se asocia principalmente a factores exógenos a la institución mientras que en el segundo toman fuerza factores internos a la universidad.

  18. El experimento formativo en el estudio del lenguaje egocentrico

    Rosalía Montealegre

    1998-01-01

    Este escrito analiza dos métodos experimentales: el genético-modelador y el estadístico (método de evaluación cuantitativa) en el estudio de lenguaje egocéntrico como regulador y planificador de la acción en el niño. Se presentan unas retlexiones teóricas sobre los métodos y su empleo en la investigación realizada por la autora en la Universidad Estatal de Moscú sobre «El papel del lenguaje en la solución de tareas espaciales por niños de edad preescolar». A diferencia de la...

  19. Estudio comparativo del desarrollo de las inteligencias múltiples en alumnos que cursan o no estudios de danza en un conservatorio

    Athanassopoulos-Zamorano, Néstor

    2015-01-01

    El objetivo de este trabajo es analizar si al comparar dos grupos de estudiantes, formados por alumnos que cursan estudios de danza en el conservatorio y alumnos que no los cursan, existen diferencias estadísticamente significativas en las Inteligencias Múltiples. La muestra total del estudio está compuesta por 175 personas, conformando dos grandes grupos, alumnos que estudian danza de manera oficial y alumnos que no estudian danza de manera oficial. Para conocer el nivel de las Inteligenc...

  20. Kinetic Friction of Sport Fabrics on Snow

    Werner Nachbauer

    2016-03-01

    Full Text Available After falls, skiers or snowboarders often slide on the slope and may collide with obstacles. Thus, the skier’s friction on snow is an important factor to reduce incidence and severity of impact injuries. The purpose of this study was to measure snow friction of different fabrics of ski garments with respect to roughness, speed, and contact pressure. Three types of fabrics were investigated: a commercially available ski overall, a smooth downhill racing suit, and a dimpled downhill racing suit. Friction was measured for fabrics taped on a short ski using a linear tribometer. The fabrics’ roughness was determined by focus variation microscopy. Friction coefficients were between 0.19 and 0.48. Roughness, friction coefficient, and friction force were highest for the dimpled race suit. The friction force of the fabrics was higher for the higher contact pressure than for the lower one at all speeds. It was concluded that the main friction mechanism for the fabrics was dry friction. Only the fabric with the roughest surface showed friction coefficients, which were high enough to sufficiently decelerate a sliding skier on beginner and intermediate slopes.

  1. EIT-based fabric pressure sensing.

    Yao, A; Yang, C L; Seo, J K; Soleimani, M

    2013-01-01

    This paper presents EIT-based fabric sensors that aim to provide a pressure mapping using the current carrying and voltage sensing electrodes attached to the boundary of the fabric patch. Pressure-induced shape change over the sensor area makes a change in the conductivity distribution which can be conveyed to the change of boundary current-voltage data. This boundary data is obtained through electrode measurements in EIT system. The corresponding inverse problem is to reconstruct the pressure and deformation map from the relationship between the applied current and the measured voltage on the fabric boundary. Taking advantage of EIT in providing dynamical images of conductivity changes due to pressure induced shape change, the pressure map can be estimated. In this paper, the EIT-based fabric sensor was presented for circular and rectangular sensor geometry. A stretch sensitive fabric was used in circular sensor with 16 electrodes and a pressure sensitive fabric was used in a rectangular sensor with 32 electrodes. A preliminary human test was carried out with the rectangular sensor for foot pressure mapping showing promising results.

  2. EIT-Based Fabric Pressure Sensing

    A. Yao

    2013-01-01

    Full Text Available This paper presents EIT-based fabric sensors that aim to provide a pressure mapping using the current carrying and voltage sensing electrodes attached to the boundary of the fabric patch. Pressure-induced shape change over the sensor area makes a change in the conductivity distribution which can be conveyed to the change of boundary current-voltage data. This boundary data is obtained through electrode measurements in EIT system. The corresponding inverse problem is to reconstruct the pressure and deformation map from the relationship between the applied current and the measured voltage on the fabric boundary. Taking advantage of EIT in providing dynamical images of conductivity changes due to pressure induced shape change, the pressure map can be estimated. In this paper, the EIT-based fabric sensor was presented for circular and rectangular sensor geometry. A stretch sensitive fabric was used in circular sensor with 16 electrodes and a pressure sensitive fabric was used in a rectangular sensor with 32 electrodes. A preliminary human test was carried out with the rectangular sensor for foot pressure mapping showing promising results.

  3. Estudio de preformulación del citrato de dietilcarbamazina

    Rafael León Rodríguez

    1999-08-01

    Full Text Available Se realizó el estudio de preformulación del citrato de dietilcarbamazina con el objetivo de conocer las características físico-químicas y tecnológicas de este fármaco para el posterior desarrollo de una tableta de 50 mg de dosis, el cual incluyó la determinación del tamaño de partícula micronizada y sin micronizar según el método de microscopia óptica, de manera que quedó demostrado la influencia que presenta éste en la disolución del fármaco in vitro. Se efectuó el estudio de incompatibilidad principio activo-excipientes mediante el método de calorimetría diferencial de barrido; no se encontró ninguna interacción entre éstos, en las condiciones de trabajo experimentales. Se estudiaron otras propiedades físico-químicas y tecnológicas del fármaco.The study of diethycarbamazine citrate preformulation with a view to finding uot the physico - chemical and tachnological characteristics of this pharmaceutical for further production of a 50 mg tablet was performed. This study included the determination of the size of micronized and non-micronized particles by optical microscopy in which the influence of size on the pharmaceutical dissolving in vitro was shown. Drug - excipient incompatibility was analysed using differential scannig calorimetry and no interaction was found under experimental working conditions. Other physico-chemical & technological properties of this pharmaceutical were examined.

  4. Un estudio exploratorio de capacidades emocionales en adultos mayores

    Zoe S. Bello Dávila

    2012-01-01

    Full Text Available Abstract The study of the emotional world of the elderly is a fundamental requisite for guaranteeing the well-being and health of this group. The objective of this research paper was to characterize a group of elderly people according to their motional capabilities. The group consisted of 122 elderly persons: 107 female, 15 male. All attendants participated in a “Círculo de Abuelos” (Circle of Grandparents. The study was descriptive, it sought to gather information about the responses of older adults in situations of emotional content by completing a questionnaire. The results provided a profile of capacities where areas of strength and weakness are clearly distinguished. Selfconfidence and the possibility of fulfilling projects are among the strengths while the weaknesses are found in interpersonal or intrapersonal managing of emotions. These results have led to a better understanding of the emotional world of the elderly and guide future educational activities. Resumen El estudio del mundo emocional de los adultos mayores es un requisito fundamental para garantizar el estado de bienestar y salud de los mismos. El presente artículo de investigación se fijó como objetivo caracterizar a un grupo de ancianos, en función de sus capacidades emocionales. Los participantes fueron 122 ancianos, en concreto 107 mujeres y 15 hombres, que asisten a un “Círculo de Abuelos”. El estudio fue de tipo descriptivo, pues pretendió recoger información acerca de las respuestas de los adultos mayores ante situaciones de contenido emocional que se exploran por medio de un cuestionario elaborado al efecto. Los resultados ofrecen un perfil de capacidades en que la autoconfianza y la posibilidad de elaborar proyectos se erigen como fortalezas, mientras que las debilidades se expresan en las dificultades para el manejo emocional tanto a nivel intra como interpersonal. Estos resultados han permitido lograr una mejor comprensión del mundo emocional del

  5. Estudio epidemiológico de la dermatitis atópica desde la farmacia comunitaria: Estudio DAFAC

    Moreno P.

    2014-03-01

    Full Text Available Objetivos: Diseñar y evaluar la utilidad de un protocolo de actuación del farmacéutico comunitario ante las consultas realizadas sobre dermatitis atópica en la farmacia comunitaria, acordando con dermatólogos los criterios de derivación. Conocer los motivos de consulta más habituales y determinar en qué casos constituyen motivo de derivación al médico. Métodos: Estudio epidemiológico realizado en farmacias comunitarias españolas entre febrero del 2011 y enero del 2012. Se incluyeron en el estudio todos los usuarios de las farmacias que consultan un problema de salud dermatológico. Los farmacéuticos participantes, tras recibir formación específica online, aplicaron el protocolo de actuación consensuado. Se registraron los motivos de consulta, los casos de derivación al médico, la existencia de sobreinfecciones, el uso de productos adecuados para el cuidado de la piel. Resultados/Discusión: Participaron 259 farmacéuticos de 15 comunidades autónomas que registraron 688 intervenciones válidas. La distribución por sexo de los pacientes corresponde a 354 (51,5 % de sexo masculino y 334 (48,5 % del femenino, con mayor incidencia de la patología en menores de 14 años. En el 70% de los casos no se requirió la derivación al dermatólogo. Motivos de consulta: prurito, irritación, dificultad para dormir, ansiedad y estrés, y sobreinfección (35%, principal causa de derivación. La elaboración y difusión del protocolo y criterios de derivación, así como los resultados del estudio a los socios de SEFAC (Sociedad Española de Farmacia Comunitaria y al resto de farmacéuticos comunitarios permitirán la resolución de muchos de los casos de dermatitis atópica, contribuyendo así a la mejora de la calidad de vida del paciente.

  6. Modelo de estudio de dos informativas familias colombianas con Síndrome de Usher

    C. González

    2001-07-01

    Full Text Available Establecer y evaluar un modelo de abordaje para el estudio del Síndrome de Usher, que abarca el diagnóstico clínico de los pacientes, establecimiento y confirmación del subtipo mediante estudios moleculares y posterior correlación genotipo-fenotipo.

  7. Modelo de estudio de dos informativas familias colombianas con Síndrome de Usher

    Tamayo ML.; González C.; Gelvez N.

    2001-01-01

    Establecer y evaluar un modelo de abordaje para el estudio del Síndrome de Usher, que abarca el diagnóstico clínico de los pacientes, establecimiento y confirmación del subtipo mediante estudios moleculares y posterior correlación genotipo-fenotipo.

  8. Fabrication of Durably Superhydrophobic Cotton Fabrics by Atmospheric Pressure Plasma Treatment with a Siloxane Precursor

    Jing Yang

    2018-04-01

    Full Text Available The surface treatment of fabrics in an atmospheric environment may pave the way for commercially viable plasma modifications of fibrous matters. In this paper, we demonstrate a durably superhydrophobic cotton cellulose fabric prepared in a single-step graft polymerization of hexamethyldisiloxane (HMDSO by N2 and O2 atmospheric pressure plasma. We systematically investigated effects on contact angle (CA and surface morphology of the cotton fabric under three operational parameters: precursor value; ionization gas flow rate; and plasma cycle time. Surface morphology, element composition, chemical structure and hydrophobic properties of the treated fabric were characterized by scanning electron microscope (SEM, EDS, FTIR and CA on the fabrics. The results indicated that a layer of thin film and nano-particles were evenly deposited on the cotton fibers, and graft polymerization occurred between cellulose and HMDSO. The fabric treated by O2 plasma exhibited a higher CA of 162° than that treated by N2 plasma which was about 149°. Furthermore, the CA of treated fabrics decreased only 0°~10° after storing at the ambient conditions for four months, and treated fabrics could also endure the standard textile laundering procedure in AATCC 61-2006 with minimum change. Therefore, this single-step plasma treatment method is shown to be a novel and environment-friendly way to make durable and superhydrophobic cotton fabrics.

  9. Fabrication of fuel elements interplay between typical SNR Mark Ia specifications and the fuel element fabrication

    Biermann, W.K.; Heuvel, H.J.; Pilate, S.; Vanderborck, Y.; Pelckmans, E.; Vanhellemont, G.; Roepenack, H.; Stoll, W.

    1987-01-01

    The core and fuel were designed for the SNR-300 first core by Interatom GmbH and Belgonucleaire. The fuel was fabricated by Alkem/RBU and Belgonucleaire. Based on the preparation of drawings and specifications and on the results of the prerun fabrication, an extensive interplay took place between design requirements, specifications, and fabrication processes at both fuel plants. During start-up of pellet and pin fabrication, this solved such technical questions as /sup 239/Pu equivalent linear weight, pellet density, stoichiometry of the pellets, and impurity content. Close cooperation of designers and manufacturers has allowed manufacture of 205 fuel assemblies without major problems

  10. INFLUENCE OF FABRIC TIGHTNESS ON SPIRALITY OF WEFTKNITTED PLAIN COTTON FABRIC

    A.K.M. Mobarok Hossain

    2011-01-01

    Full Text Available Global demand for knitted garments is growing at a faster rate than that of woven items.Currently around 50% of clothing needs in the developed countries is met by knit goods. So ensuring the required quality in a knitted fabric is a vital issue for the manufacturer. One of the major problems encountered in knitted fabric is spirality. It affects particularly single jersey fabric and presents a serious problem during garment confection and use. So controlling spirality is a basic requirement for producing quality knitted fabric. Though there are several factors that contribute to knitted fabric spirality, yarn twist and relative tightness of the fabric are said tobe the most significant ones. In this work the basic single jersey fabric, i.e. plain jersey cotton fabrics were produced by a Hosiery knitting machine and spirality values were observed for different yarn T.P.I. and tightness factor at relaxed state. It was found that tightness factor has a direct influence on knitted fabric spirality with a high degree of correlation. The work thus gives an idea to deal this problem by controlling the knitting parameters.

  11. Fabrication and characterization of active nanostructures

    Opondo, Noah F.

    Three different nanostructure active devices have been designed, fabricated and characterized. Junctionless transistors based on highly-doped silicon nanowires fabricated using a bottom-up fabrication approach are first discussed. The fabrication avoids the ion implantation step since silicon nanowires are doped in-situ during growth. Germanium junctionless transistors fabricated with a top down approach starting from a germanium on insulator substrate and using a gate stack of high-k dielectrics and GeO2 are also presented. The levels and origin of low-frequency noise in junctionless transistor devices fabricated from silicon nanowires and also from GeOI devices are reported. Low-frequency noise is an indicator of the quality of the material, hence its characterization can reveal the quality and perhaps reliability of fabricated transistors. A novel method based on low-frequency noise measurement to envisage trap density in the semiconductor bandgap near the semiconductor/oxide interface of nanoscale silicon junctionless transistors (JLTs) is presented. Low-frequency noise characterization of JLTs biased in saturation is conducted at different gate biases. The noise spectrum indicates either a Lorentzian or 1/f. A simple analysis of the low-frequency noise data leads to the density of traps and their energy within the semiconductor bandgap. The level of noise in silicon JLT devices is lower than reported values on transistors fabricated using a top-down approach. This noise level can be significantly improved by improving the quality of dielectric and the channel interface. A micro-vacuum electron device based on silicon field emitters for cold cathode emission is also presented. The presented work utilizes vertical Si nanowires fabricated by means of self-assembly, standard lithography and etching techniques as field emitters in this dissertation. To obtain a high nanowire density, hence a high current density, a simple and inexpensive Langmuir Blodgett technique

  12. Los estudios longitudinales en la prevención de las enfermedades cardiovasculares

    Ignacio Balaguer Vintró

    2004-01-01

    Full Text Available Los estudios longitudinales de cohortes bien definidas han contribuido a la identificación de los factores de riesgo de la cardiopatía coronaria y otras complicaciones clínicas de la aterosclerosis. Después de comentar las conclusiones de los estudios de la aterosclerosis experimental y los factores de riesgo sugeridos por el estudio de una serie de infartos de miocardio en adultos jóvenes en comparación con controles apareados, se expone la metodología, el desarrollo y los resultados de los estudios longitudinales realizados en Estados Unidos desde 1949: Twin Cities, Framingham, Pooling Project, Western Collaborative, Puerto Rico, Evans County, NI-HONSAN, San Francisco, Harvard, Bogalusa y CARDIA. Se presta especial atención a las hipótesis propuestas al inicio del estudio de Framingham y a los obstáculos y cambios para continuar el proyecto después de los primeros veinticuatro años. A continuación se expone el Seven Countries Study, ideado y dirigido por Ancel Keys y primer estudio realizado con metodología centralizada en varios países, y los estudios longitudinales realizados en diversos países de Europa: Whitehall, Manresa, París, British Regional, Northwick Park, Caerphilly, Speedwell, PROCAM. Se analiza el papel de los estudios longitudinales en la metodología de los estudios posteriores: hijos e hijas de los participantes en Framingham, estudios longitudinales basados en cuestionarios, estudios de otros posibles factores de riesgo, prevalencia de factores de riesgo en estudios retrospectivos, ensayos de intervención primaria (MRFT, WHO European Collaborative Trial y el de Goteburgo y la participación de los equipos entrenados en el Proyecto MONICA. Se señalan los temas todavía en debate en relación con la metodología y los resultados de los estudios longitudinales: exámenes periódicos de los participantes en las cohortes de los estudios epidemiológicos, cambios en la definición de nuevos casos de accidentes

  13. Centro de Estudios para el Desarrollo Rural Sustentable y la Soberanía Alimentaria (CEDRSSA. Estudios e investigaciones: nueva ruralidad; enfoques y propuestas para América Latina

    Rosa Inés Babilonia Ballesteros

    2014-01-01

    Full Text Available Centro de Estudios para el Desarrollo Rural Sustentable y la Soberanía Alimentaria (CEDRSSA. Estudios e investigaciones:nueva ruralidad; enfoques y propuestas para América Latina.

  14. Fabrication of HTTR first loading fuel

    Kato, S.; Yoshimuta, S.; Hasumi, T.; Sato, K.; Sawa, K.; Suzuki, S.; Mogi, H.; Shiozawa, S.; Tanaka, T.

    2001-01-01

    This paper summarizes the fabrication of the first loading fuel for HTTR, High Temperature engineering Test Reactor constructed by JAERI, Japan Atomic Energy Research Institute. The fuel fabrication started at the HTR fuel facility of NFI, Nuclear Fuel Industries, Ltd., June 1995. 4,770 fuel rods were fabricated through the fuel kernel, coated fuel particle and fuel compaction process, then 150 fuel elements were assembled in the reactor building December 1997. Fabrication technology for the fuel was established through a lot of R and D activities and fabrication experience of irradiation examination samples spread over about 30 years. Most of all, very high quality and production efficiency of fuel were achieved by the development of the fuel kernel process using the vibration dropping technology, the continuous 4-layer coating process and the automatic compaction process. As for the inspection technology, the development of the automatic measurement equipment for coated layer thickness of a coated fuel particle and uranium content of a fuel compact contributed to the higher reliability and rationalization of the inspection process. The data processing system for the fabrication and quality control, which was originally developed by NFI, made possible not only quick feedback of statistical quality data to the fabrication processes, but also automatic document preparation, such as inspection certificates and accountability control reports. The quality of the first loading fuel fully satisfied the design specifications for the fuel. In particular, average bare uranium fraction and SiC defective fraction of fuel compacts were 2x10 -6 and 8x10 -5 , respectively. According to the preceding irradiation examinations being performed at JMTR, Japan Materials Testing Reactor of JAERI, the specimen sampled from the first loading fuel shows good irradiation performance. (author)

  15. Fabrication of miniaturized electrostatic deflectors using LIGA

    Jackson, K.H.; Khan-Malek, C.; Muray, L.P.

    1997-01-01

    Miniaturized electron beam columns (open-quotes microcolumnsclose quotes) have been demonstrated to be suitable candidates for scanning electron microscopy (SEM), e-beam lithography and other high resolution, low voltage applications. In the present technology, microcolumns consist of open-quotes selectively scaledclose quotes micro-sized lenses and apertures, fabricated from silicon membranes with e-beam lithography, reactive ion beam etching and other semiconductor thin-film techniques. These miniaturized electron-optical elements provide significant advantages over conventional optics in performance and ease of fabrication. Since lens aberrations scale roughly with size, it is possible to fabricate simple microcolumns with extremely high brightness sources and electrostatic objective lenses, with resolution and beam current comparable to conventional e-beam columns. Moreover since microcolumns typically operate at low voltages (1 KeV), the proximity effects encountered in e-beam lithography become negligible. For high throughput applications, batch fabrication methods may be used to build large parallel arrays of microcolumns. To date, the best reported performance with a 1 keV cold field emission cathode, is 30 nm resolution at a working distance of 2mm in a 3.5mm column. Fabrication of the microcolumn deflector and stigmator, however, have remained beyond the capabilities of conventional machining operations and semiconductor processing technology. This work examines the LIGA process as a superior alternative to fabrication of the deflectors, especially in terms of degree of miniaturization, dimensional control, placement accuracy, run-out, facet smoothness and choice of suitable materials. LIGA is a combination of deep X-ray lithography, electroplating, and injection molding processes which allow the fabrication of microstructures

  16. Estudio de las cualidades inmunoestimulantes de nuevas bacterias probióticas asociadas al cultivo de lv

    Gullian, Mariel; Rodríguez, Jenny

    2002-01-01

    Estudio de las cualidades inmunoestimulantes de nuevas bacterias probióticas asociadas al cultivo de LV Estudio de las cualidades inmunoestimulantes de nuevas bacterias probióticas asociadas al cultivo de LV

  17. Functional electronic screen printing – electroluminescent smart fabric watch

    de Vos, Marc; Torah, Russel; Beeby, Steve; Tudor, John

    2013-01-01

    Motivation for screen printed smart fabrics.Introduce functional electronic screen printing on fabrics.Printed smart fabric watch design.Printing process for electroluminescent watch.Demonstration video.Conclusions and further work.Examples of other screen printed smart fabrics.

  18. Technical study report on fuel fabrication system

    Kono, Shusaku; Tanaka, Kenya; Ono, Kiyoshi; Iwasa, Katsuyoshi; Hoshino, Yasushi; Shinkai, Yasuo

    2000-07-01

    The feasibility study of FBR and related fuel cycle is performed for developing the FBR recycle system which ensures safety, economic competitiveness, efficient utilization of resources, reduction of environmental burden and enhancement of nuclear non-proliferation under consistency of FBR reactor and fuel cycle systems. In this study, a conceptual design study and system characteristics evaluation are conducted for fuel fabrication systems of pellet process, vibropack process for oxide and nitride fuel and casting process for metal fuel. Technical issues in each process are also extracted. In 1999 fiscal year, a conceptual design study were conducted for the fuel fabrication plants adopting (1) the short pellet process which simplifies the conventional MOX pellet fabrication processes, (2) vibropack processes of aqueous gelation process, improved RIAR process, improved ANL process and fluoride volatility process, (3) casting processes of injection process, centrifuging process. As a result, attainable perspective was obtained for each fuel fabrication system through the evaluation of apparatuses, layout and facility volume, etc. In each fuel fabrication system, technical issues for practical use were made clear. Hereafter, more detailed study will be performed for each system, and research programs for phase II study will be planned. (author)

  19. Fabrication of preliminary fuel rods for SFR

    Kim, Sun Ki; Oh, Seok Jin; Ko, Young Mo; Woo, Youn Myung; Kim, Ki Hwan

    2012-01-01

    Metal fuels was selected for fueling many of the first reactors in the US, including the Experimental Breeder Reactor-I (EBR-I) and the Experimental Breeder Reactor-II (EBR-II) in Idaho, the FERMI-I reactor, and the Dounreay Fast Reactor (DFR) in the UK. Metallic U.Pu.Zr alloys were the reference fuel for the US Integral Fast Reactor (IFR) program. Metallic fuel has advantages such as simple fabrication procedures, good neutron economy, high thermal conductivity, excellent compatibility with a Na coolant and inherent passive safety. U-Zr-Pu alloy fuels have been used for SFR (sodium-cooled fast reactor) related to the closed fuel cycle for managing minor actinides and reducing a high radioactivity levels since the 1980s. Fabrication technology of metallic fuel for SFR has been in development in Korea as a national nuclear R and D program since 2007. For the final goal of SFR fuel rod fabrication with good performance, recently, three preliminary fuel rods were fabricated. In this paper, the preliminary fuel rods were fabricated, and then the inspection for QC(quality control) of the fuel rods was performed

  20. 3D bioprinting for vascularized tissue fabrication

    Richards, Dylan; Jia, Jia; Yost, Michael; Markwald, Roger; Mei, Ying

    2016-01-01

    3D bioprinting holds remarkable promise for rapid fabrication of 3D tissue engineering constructs. Given its scalability, reproducibility, and precise multi-dimensional control that traditional fabrication methods do not provide, 3D bioprinting provides a powerful means to address one of the major challenges in tissue engineering: vascularization. Moderate success of current tissue engineering strategies have been attributed to the current inability to fabricate thick tissue engineering constructs that contain endogenous, engineered vasculature or nutrient channels that can integrate with the host tissue. Successful fabrication of a vascularized tissue construct requires synergy between high throughput, high-resolution bioprinting of larger perfusable channels and instructive bioink that promotes angiogenic sprouting and neovascularization. This review aims to cover the recent progress in the field of 3D bioprinting of vascularized tissues. It will cover the methods of bioprinting vascularized constructs, bioink for vascularization, and perspectives on recent innovations in 3D printing and biomaterials for the next generation of 3D bioprinting for vascularized tissue fabrication. PMID:27230253

  1. Composite fabrication via resin transfer molding technology

    Jamison, G.M.; Domeier, L.A.

    1996-04-01

    The IMPReS (Integrated Modeling and Processing of Resin-based Structures) Program was funded in FY95 to consolidate, evaluate and enhance Sandia`s capabilities in the design and fabrication of composite structures. A key driver of this and related programs was the need for more agile product development processes and for model based design and fabrication tools across all of Sandia`s material technologies. A team of polymer, composite and modeling personnel was assembled to benchmark Sandia`s existing expertise in this area relative to industrial and academic programs and to initiate the tasks required to meet Sandia`s future needs. RTM (Resin Transfer Molding) was selected as the focus composite fabrication technology due to its versatility and growing use in industry. Modeling efforts focused on the prediction of composite mechanical properties and failure/damage mechanisms and also on the uncured resin flow processes typical of RTM. Appropriate molds and test composites were fabricated and model validation studies begun. This report summarizes and archives the modeling and fabrication studies carried out under IMPReS and evaluates the status of composite technology within Sandia. It should provide a complete and convenient baseline for future composite technology efforts within Sandia.

  2. Estudio de impacto ambiental de un aeródromo

    Gómez Orea, Domingo

    1996-04-01

    actividades, estimulan las iniciativas locales y revalorizan los territorios contiguos. Se expone en este artículo una síntesis del Estudio de Impacto Ambiental de un futuro aeródromo, actualmente en fase de proyecto, cuya vinculación al procedimiento administrativo de EIA, viene determinada por la legislación específica vigente en la actualidad: R.D. 1302/86. El documento técnico sobre el que se hace el estudio corresponde al plan especial del aeródromo. Un criterio básico en la concepción de aeropuertos y aeródromos privados es la compatibilidad con la habitabilidad del entorno y con las condiciones ecológicas y paisajísticas, criterio que debe intervenir en la orientación de las pistas, trayectorias en la maniobras de despegue y aterrizaje... incluso en la localización y diseño de estacionamientos, hangares y demás instalaciones. Esta idea aconseja concebir el proyecto con sensibilidad ambiental, desde las primeras fases, evitando repercutir la responsabilidad en este tema al estudio de impacto ambiental. Se adopta un estilo propio de la divulgación, en la idea de que más que los datos técnicos, que sólo interesan a la tramitación del proyecto, el lector encontrará mayor utilidad en los aspectos metodológicos y en aquéllos que han permitido al equipo redactor formar criterio sobre los costes y beneficios ambientales del proyecto y sobre la aceptabilidad de éste, en suma. Se ha utilizado una metodología clásica, de acuerdo con los requerimientos del reglamento de EIA.

  3. Development of technology for fabrication of lithium CPS on basis of CNT-reinforced carboxylic fabric

    Tazhibayeva, Irina; Baklanov, Viktor; Ponkratov, Yuriy; Abdullin, Khabibulla; Kulsartov, Timur; Gordienko, Yuriy; Zaurbekova, Zhanna; Lyublinski, Igor; Vertkov, Alexey; Skakov, Mazhyn

    2017-01-01

    Highlights: • Preliminary study of carboxylic fabric wettability with liquid lithium is presented. • Preliminary studies of carboxylic fabric wettability with liquid lithium consist in carrying out of experiments at temperatures 673,773 and 873 К in vacuum during long time. • A scheme of experimental device for manufacturing of lithium CPS and matrix filling procedure with liquid lithium are presented. • The concept of lithium limiter with CPS on basis of CNT-reinforced carboxylic fabric is proposed. - Abstract: The paper describes the analysis of liquid lithium interaction with materials based on carbon, the manufacture technology of capillary-porous system (CPS) matrix on basis of CNT-reinforced carboxylic fabric. Preliminary study of carboxylic fabric wettability with liquid lithium is presented. The development of technology includes: microstructural studies of carboxylic fabric before its CNT-reinforcing; validation of CNT-reinforcing technology; mode validation of CVD-method for CNT synthesize; study of synthesized carbon structures. Preliminary studies of carboxylic fabric wettability with liquid lithium consist in carrying out of experiments at temperatures 673, 773 and 873 К in vacuum during long time. The scheme of experimental device for manufacturing of lithium CPS and matrix filling procedure with liquid lithium are presented. The concept of lithium limiter with CPS on basis of CNT-reinforced carboxylic fabric is proposed.

  4. Development of technology for fabrication of lithium CPS on basis of CNT-reinforced carboxylic fabric

    Tazhibayeva, Irina, E-mail: tazhibayeva@ntsc.kz [Institute of Atomic Energy, National Nuclear Center of RK, Kurchatov (Kazakhstan); Baklanov, Viktor; Ponkratov, Yuriy [Institute of Atomic Energy, National Nuclear Center of RK, Kurchatov (Kazakhstan); Abdullin, Khabibulla [Institute of Experimental and Theoretical Physics of Kazakh National University, Almaty (Kazakhstan); Kulsartov, Timur; Gordienko, Yuriy; Zaurbekova, Zhanna [Institute of Atomic Energy, National Nuclear Center of RK, Kurchatov (Kazakhstan); Lyublinski, Igor [JSC «Red Star», Moscow (Russian Federation); NRNU «MEPhI», Moscow (Russian Federation); Vertkov, Alexey [JSC «Red Star», Moscow (Russian Federation); Skakov, Mazhyn [Institute of Atomic Energy, National Nuclear Center of RK, Kurchatov (Kazakhstan)

    2017-04-15

    Highlights: • Preliminary study of carboxylic fabric wettability with liquid lithium is presented. • Preliminary studies of carboxylic fabric wettability with liquid lithium consist in carrying out of experiments at temperatures 673,773 and 873 К in vacuum during long time. • A scheme of experimental device for manufacturing of lithium CPS and matrix filling procedure with liquid lithium are presented. • The concept of lithium limiter with CPS on basis of CNT-reinforced carboxylic fabric is proposed. - Abstract: The paper describes the analysis of liquid lithium interaction with materials based on carbon, the manufacture technology of capillary-porous system (CPS) matrix on basis of CNT-reinforced carboxylic fabric. Preliminary study of carboxylic fabric wettability with liquid lithium is presented. The development of technology includes: microstructural studies of carboxylic fabric before its CNT-reinforcing; validation of CNT-reinforcing technology; mode validation of CVD-method for CNT synthesize; study of synthesized carbon structures. Preliminary studies of carboxylic fabric wettability with liquid lithium consist in carrying out of experiments at temperatures 673, 773 and 873 К in vacuum during long time. The scheme of experimental device for manufacturing of lithium CPS and matrix filling procedure with liquid lithium are presented. The concept of lithium limiter with CPS on basis of CNT-reinforced carboxylic fabric is proposed.

  5. Etica, la academia, y las organizaciones sociales: estudio de caso

    Sans, Mónica

    2005-01-01

    Full Text Available La Constitución de la República Oriental del Uruguay señala, en su Artículo 70: "El Estado propenderá al desarrollo de la investigación científica...". Sin embargo, la repatriación, a instancias de una organización de descendientes de indígenas autotitulados charrúas (ADENCH y con apoyo del Parlamento, de los restos del cacique charrúa Vaimaca Perú, muerto en cautividad en Francia en 1833, motivó controversias acerca de si los restos del mismo podían ser estudiados. Esta discusión no fue académica, si bien hubo derivaciones que influyeron sobre otras investigaciones, sino que fue suscitada por dicha organización la cual se opuso al estudio de los restos llegando a interponer varios recursos legales; uno de éstos, que condujo a un juicio, motivó un fallo histórico de un Tribunal de Apelaciones a favor del "interés general" por conocer "sin ataduras, sin secretos y sin misterios, la identidad de nuestro pueblo...". Sin embargo, y sin que se hiciera mención de dicha sentencia, el Parlamento aprobó posteriormente la Ley 17.767 que prohíbe expresamente la realización de "experimentos y estudios científicos" en los restos de Vaimaca Perú, violando según algunos autores, la propia Constitución y planteando, además de la discordancia entre dos Poderes del Estado, la oposición entre diversos intereses. A partir de estos hechos se propone analizar los valores éticos que subyacen a la investigación, si deben plantearse limitaciones a ésta y de ser así, cuáles, e incluso, cómo se debe normar sobre las mismas.

  6. Estudio de caso y aprendizaje cooperativo en la universidad

    Pedro Aramendi Jauregui

    2014-01-01

    Full Text Available Diseñar los planes de estudio en función del desarrollo de competencias demanda cambios metodológicos importantes. El método de caso es una de las estrategias de enseñanza y aprendizaje más adecuadas para desarrollar las competencias orientadas al trabajo en equipo y al fomento de la colaboración. El artículo que se presenta es un resumen del proyecto de innovación “El estudio de caso y el aprendizaje cooperativo en la universidad” (PIE-2010-2012 financiado por la Universidad del País Vasco. El objetivo general del proyecto es implementar el método de caso en las asignaturas de Organización de Centros (SocioEducativos (titulaciones de Pedagogía y Educación Social. MÉTODO: Se han seleccionado dos grupos de segundo curso de la titulación de Educación Social (uno en euskera y otro en castellano y otros dos del mismo curso de Pedagogía en ambos idiomas. En uno de los grupos de cada titulación se trabajaron técnicas de dinámica de grupo y en otro se desarrolló la estrategia del método de caso sin la ayuda de ellas. El alumnado evaluó la experiencia mediante un diario de grupo. RESULTADOS: Los datos indican que el alumnado está satisfecho con las actividades de aprendizaje realizadas en clase, las competencias de la titulación se desarrollan de manera satisfactoria y el funcionamiento de los grupos experimentales, en general, es mejor que el de los grupos control. La eficacia del trabajo grupal está estrechamente vinculada con variables de tipo relacional. DISCUSIÓN: La cooperación, la ayuda y la supervisión de tareas entre los miembros del grupo fomentan la interacción y el sentimiento de seguridad entre los estudiantes que tienen dificultades para lograr los objetivos de aprendizaje. Un alumno o alumna que se siente respaldado por su grupo a nivel académico, afectivo y relacional probablemente va a percibir un contexto de trabajo más seguro, inclusivo y acogedor.

  7. Obesidad infantil: un nuevo enfoque para su estudio

    Fabian Leonardo Muñoz Muñoz

    2017-01-01

    Full Text Available La Organización Mundial de la Salud ( OMS ha catalogado la obesidad infantil como la mayor crisis de la salud pública en el mundo. En su informe de 2014 indica que se registraron cuarenta y dos millones de niños menores de 5 años con sobrepeso; de ellos, treinta y cinco millones viven en países en desarrollo. La obesidad infantil es una enfermedad que tiene como origen una cadena causal compleja, de etiología multifactorial, en la que interactúan factores individuales y contextuales; en ellos el niño se encuentra inmerso, y ejercen influencia sobre su comportamiento, en diversos entornos y en diferentes niveles de jerarquía. Esta revisión presenta una descripción de algunos estudios y esfuerzos realizados para carac - terizar, prevenir y controlar la epidemia de obesidad en esta etapa del ciclo vital. Se propone, así mismo, un abordaje para el estudio de la obesidad, denominado ‘Enfoque de sistemas complejos’, el cual permite analizar cómo los factores individuales y contextuales se relacionan, y cómo esa interacción genera nuevas propiedades que no pueden explicarse a partir de los procedimientos habituales de análisis epidemiológico; para ello será necesario el trabajo en equipo, con enfoque multidisciplinario, que incluya médicos, pediatras, nutricionistas, epidemiólogos, salubristas, estadísticos, ingenieros, entre otros profesionales, que aporten sus conocimientos y habilidades, que permitan entender la obesidad como un fenómeno dinámi - co que requiere ser abordado con un enfoque integral e integrador, que trascienda la mirada reduccionista de los factores de riesgo del proceso salud – enfermedad. Solo entonces se podrá mejorar la capacidad para comprender la salud desde una perspectiva clásica hasta un sistema verdaderamente dinámico.

  8. LOS GENES BRCA1 y BRCA2. ESTUDIO MOLECULAR

    N. Alonso

    2006-11-01

    Full Text Available RESUMENEn los últimos años, se realizaron numerosos estudios para establecer la predisposición hereditaria al cáncer y las alteraciones mutacionales a nivel de genes susceptibles de originar cáncer de mama y ovario. En 1994 se identificaron los genes BRCA1 (Breast Cancer Gene 1 y BRCA2 (Breast Cancer Gene 2 como susceptibles de cáncer de mama y ovario. En la actualidad se sabe que las mutaciones en BRCA1 y BRCA2 están lejos de explicar la totalidad de los casos de cáncer de mama y/o ovario, y a pesar de que se postulan alteraciones mutacionales en otros genes como CHEK2, TP53 y PTEN, el BRCA1 y BRCA2, siguen teniendo su importancia y utilidad en la valoración del riesgo de predisposición hereditaria. Aunque las cifras son variables según los distintos estudios y autores, se trata en cualquier caso de porcentajes importantes. Entre el 15 y el 85% de las mujeres portadoras de mutación BRCA 1 o BRCA 2 tienen riesgo de desarrollar un cáncer de mama y entre un 10 y 60% de desarrollar un cáncer de ovario. ABSTRACT:In the last years, numerous studies were made to establish the hereditary predisposition to the cancer and the mutationals alterations at level of genes susceptible to originate breast and ovarian cancers. In 1994 genes BRCA1 (Breast Cancer Gene 1 and BRCA2 were identified (Breast Cancer Gene 2 as susceptible of both of breast and ovarian cancers. At the present time, it is knows that the mutations in BRCA 1 and BRCA 2 are far from explaining the totality of the cases of breast cancer and/or ovary, and although mutationals alterations in other genes like CHEK2, TP53 and PTEN, the BRCA1 and BRCA2 are postulated, they continue having his importance and utility in the valuation of the risk of hereditary predisposition. Correlations between both BRCA1 and BRCA2 levels with tumour grade metastasis and prognostic accuracy. Between 15 and 85% of the carrying women of mutation BRCA 1 or BRCA 2 have risk of developing a cancer of breast

  9. CMOS MEMS Fabrication Technologies and Devices

    Hongwei Qu

    2016-01-01

    Full Text Available This paper reviews CMOS (complementary metal-oxide-semiconductor MEMS (micro-electro-mechanical systems fabrication technologies and enabled micro devices of various sensors and actuators. The technologies are classified based on the sequence of the fabrication of CMOS circuitry and MEMS elements, while SOI (silicon-on-insulator CMOS MEMS are introduced separately. Introduction of associated devices follows the description of the respective CMOS MEMS technologies. Due to the vast array of CMOS MEMS devices, this review focuses only on the most typical MEMS sensors and actuators including pressure sensors, inertial sensors, frequency reference devices and actuators utilizing different physics effects and the fabrication processes introduced. Moreover, the incorporation of MEMS and CMOS is limited to monolithic integration, meaning wafer-bonding-based stacking and other integration approaches, despite their advantages, are excluded from the discussion. Both competitive industrial products and state-of-the-art research results on CMOS MEMS are covered.

  10. Decontamination of polypropylene fabrics by dry cleaning

    Severa, J.; Knajfl, J.

    1983-01-01

    Polypropylene fabrics can efficiently be decontaminated by dry cleaning in benzine or perchloroethylene, this also in case the fabric was greased in addition to radioactive contamination. For heavily soiled fabric, it is advantageous to first dry clean it and then wash it. The positive effect was confirmed of intensifiers on the cleaning process, especially of benzine soap. In practice, its concentration should be selected within 1 and 10 g.dm - 3 . Decontamination by dry cleaning and subsequent washing is advantageous in that that the resulting activity of waste water from the laundry is low. Radioactive wastes from the dry cleaning process have a low weight and can be handled as solid waste. (M.D.)

  11. HIP technologies for fusion reactor blankets fabrication

    Le Marois, G.; Federzoni, L.; Bucci, P.; Revirand, P.

    2000-01-01

    The benefit of HIP techniques applied to the fabrication of fusion internal components for higher performances, reliability and cost savings are emphasized. To demonstrate the potential of the techniques, design of new blankets concepts and mock-ups fabrication are currently performed by CEA. A coiled tube concept that allows cooling arrangement flexibility, strong reduction of the machining and number of welds is proposed for ITER IAM. Medium size mock-ups according to the WCLL breeding blanket concept have been manufactured. The fabrication of a large size mock-up is under progress. These activities are supported by numerical calculations to predict the deformations of the parts during HIP'ing. Finally, several HIP techniques issues have been identified and are discussed

  12. Fabrication process of expanded cooling jackets

    Weber, C.M.

    1980-01-01

    The present invention concerns the fabrication process of heat exchangers and in particular, the fabrication and assembly process of cooling jackets of the system driving the control rods used in nuclear reactors. The cooling jackets are assembled for cooling the stator of a tubular motor displacing the control rods. The fabrication and assembling of the cooling jacket is made up by the following operations: - a sleeve has an inner fluid inlet and outlet ways, - an external socket is fitted to the sleeve, - on the external socket a continuous welding is realized, which join the socket to the sleeve, and define a serie of parallel welded turns, - a pressure is established between the sleeve and the socket by a fluid through the outlet or inlet ways of the sleeve. When the other way is sealed up, the socket expands between the welded turns, and the fluid can pass through the jacket [fr

  13. MITG test assembly design and fabrication

    Schock, A.

    1983-01-01

    The design, analysis, and evaluation of the Modular Isotopic Thermoelectric Generator (MITG), described in an earlier paper, led to a program to build and test prototypical, modules of that generator. Each test module duplicates the thermoelectric converters, thermal insulation, housing and radiator fins of a typical generator slice, and simulates its isotope heat source module by means of an electrical heater encased in a prototypical graphite box. Once the approx. 20-watt MITG module has been developed, it can be assembled in appropriate number to form a generator design yielding the desired power output. The present paper describes the design and fabrication of the MITG test assembly, which confirmed the fabricability of the multicouples and interleaved multifoil insulation called for by the design. Test plans, procedures, instrumentation, results, and post-test analyses, as well as revised designs, fabrication procedures, and performance estimates, are described in subsequent papers in these proceedings

  14. Design, fabrication and installation of irradiation facilities

    Kim, Yong Sung; Lee, C. Y.; Kim, J. Y.; Chi, D. Y.; Kim, S. H.; Ahn, S. H.; Kim, S. J.; Kim, J. K.; Yang, S. H.; Yang, S. Y.; Kim, H. R.; Kim, H.; Lee, K. H.; Lee, B. C.; Park, C.; Lee, C. T.; Cho, S. W.; Kwak, K. K.; Suk, H. C. [and others

    1997-07-01

    The principle contents of this project are to design, fabricate and install the steady-state fuel test loop and non-instrumented capsule in HANARO for nuclear technology development. This project will be completed in 1999, the basic and detail design, safety analysis, and procurement of main equipment for fuel test loop have been performed and also the piping in gallery and the support for IPS piping in reactor pool have been installed in 1994. In the area of non-instrumented capsule for material irradiation test, the fabrication of capsule has been completed. Procurement, fabrication and installation of the fuel test loop will be implemented continuously till 1999. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and safety analysis report has been submitted to KINS to get a license and review of HANARO interface have been performed respectively. (author). 39 refs., 28 tabs., 21 figs.

  15. Fabrication of Josephson Junction without shadow evaporation

    Wu, Xian; Ku, Hsiangsheng; Long, Junling; Pappas, David

    We developed a new method of fabricating Josephson Junction (Al/AlOX/Al) without shadow evaporation. Statistics from room temperature junction resistance and measurement of qubits are presented. Unlike the traditional ``Dolan Bridge'' technique, this method requires two individual lithographies and straight evaporations of Al. Argon RF plasma is used to remove native AlOX after the first evaporation, followed by oxidation and second Al evaporation. Junction resistance measured at room temperature shows linear dependence on Pox (oxidation pressure), √{tox} (oxidation time), and inverse proportional to junction area. We have seen 100% yield of qubits made with this method. This method is promising because it eliminates angle dependence during Junction fabrication, facilitates large scale qubits fabrication.

  16. Ion traps fabricated in a CMOS foundry

    Mehta, K. K.; Ram, R. J. [Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Eltony, A. M.; Chuang, I. L. [Center for Ultracold Atoms, Research Laboratory of Electronics and Department of Physics, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Bruzewicz, C. D.; Sage, J. M., E-mail: jsage@ll.mit.edu; Chiaverini, J., E-mail: john.chiaverini@ll.mit.edu [Lincoln Laboratory, Massachusetts Institute of Technology, Lexington, Massachusetts 02420 (United States)

    2014-07-28

    We demonstrate trapping in a surface-electrode ion trap fabricated in a 90-nm CMOS (complementary metal-oxide-semiconductor) foundry process utilizing the top metal layer of the process for the trap electrodes. The process includes doped active regions and metal interconnect layers, allowing for co-fabrication of standard CMOS circuitry as well as devices for optical control and measurement. With one of the interconnect layers defining a ground plane between the trap electrode layer and the p-type doped silicon substrate, ion loading is robust and trapping is stable. We measure a motional heating rate comparable to those seen in surface-electrode traps of similar size. This demonstration of scalable quantum computing hardware utilizing a commercial CMOS process opens the door to integration and co-fabrication of electronics and photonics for large-scale quantum processing in trapped-ion arrays.

  17. The LHC Main Quadrupoles during Series Fabrication

    Tortschanoff, Theodor; Durante, M; Hagen, P; Klein, U; Krischel, D; Payn, A; Rossi, L; Schellong, B; Schmidt, P; Simon, F; Schirm, K-M; Todesco, E

    2006-01-01

    By the end of August 2005 about 320 of the 400 main LHC quadrupole magnets have been fabricated and about 220 of them assembled into their cold masses, together with corrector magnets. About 130 of them have been cold tested in their cryostats and most of the quadrupoles exceeded their nominal excitation, i.e. 12,000 A, after no more than two training quenches. During this series fabrication, the quality of the magnets and cold masses was thoroughly monitored by means of warm magnetic field measurements, of strict geometrical checking, and of various electrical verifications. A number of modifications were introduced in order to improve the magnet fabrication, mainly correction of the coil geometry for achieving the specified field quality and measures for avoiding coil insulation problems. Further changes concern the electrical connectivity and insulation of instrumentation, and of the corrector magnets inside the cold masses. The contact resistances for the bus-bar connections to the quench protection diode...

  18. Gentrification and community fabric in Chicago.

    Betancur, John

    2011-01-01

    Critical authors of gentrification point to its deleterious impacts on displaced residents. Research on the nature or actual forms of impacts has not advanced much, however. This paper attempts to specify impacts on low-income racial/ethnic groups (Latinos in particular) in five Chicago neighbourhoods, with a particular focus on neighbourhood-based fabrics of support and advancement. Limited in their mobility and exchange value resources, lower-income groups depend on such fabrics far more than do the higher income. In fact, they have fewer choices and are most vulnerable to place-based shifts. The case seems especially challenging for minorities who, like European immigrants before them, depend largely on place-based platforms/social fabrics but, unlike them, confront the added factors of race and urban restructuring.

  19. Design, fabrication and installation of irradiation facilities

    Kim, Yong Sung; Lee, C. Y.; Kim, J. Y.; Chi, D. Y.; Kim, S. H.; Ahn, S. H.; Kim, S. J.; Kim, J. K.; Yang, S. H.; Yang, S. Y.; Kim, H. R.; Kim, H.; Lee, K. H.; Lee, B. C.; Park, C.; Lee, C. T.; Cho, S. W.; Kwak, K. K.; Suk, H. C.

    1997-07-01

    The principle contents of this project are to design, fabricate and install the steady-state fuel test loop and non-instrumented capsule in HANARO for nuclear technology development. This project will be completed in 1999, the basic and detail design, safety analysis, and procurement of main equipment for fuel test loop have been performed and also the piping in gallery and the support for IPS piping in reactor pool have been installed in 1994. In the area of non-instrumented capsule for material irradiation test, the fabrication of capsule has been completed. Procurement, fabrication and installation of the fuel test loop will be implemented continuously till 1999. As besides, as these irradiation facilities will be installed in HANARO, review of safety concern, discussion with KINS for licensing and safety analysis report has been submitted to KINS to get a license and review of HANARO interface have been performed respectively. (author). 39 refs., 28 tabs., 21 figs

  20. Fabrication of CFRP/Al Active Laminates

    Asanuma, Hiroshi; Haga, Osamu; Ohira, Junichiro; Takemoto, Kyosuke; Imori, Masataka

    This paper describes fabrication and evaluation of the active laminate. It was made by hot-pressing of an aluminum plate as a high CTE material, a unidirectional CFRP prepreg as a low CTE material and an electric resistance heater, a KFRP prepreg as a low CTE material and an insulator between them, and copper foils as electrodes. In this study, fabricating conditions and performances such as curvature change and output force were examined. Under optimized fabricating conditions, it became clear that 1) the curvature of the active laminate linearly changes as a function of temperature, between room temperature and its hot pressing temperature without hysteresis by electric resistance heating of carbon fiber in the CFRP layer and cooling, and 2) the output force against a fixed punch almost linearly increases with increasing temperature during heating from 313K up to around the glass transition temperature of the epoxy matrix.

  1. Scanning probe lithography for nanoimprinting mould fabrication

    Luo Gang; Xie Guoyong; Zhang Yongyi; Zhang Guoming; Zhang Yingying; Carlberg, Patrick; Zhu Tao; Liu Zhongfan

    2006-01-01

    We propose a rational fabrication method for nanoimprinting moulds by scanning probe lithography. By wet chemical etching, different kinds of moulds are realized on Si(110) and Si(100) surfaces according to the Si crystalline orientation. The structures have line widths of about 200 nm with a high aspect ratio. By reactive ion etching, moulds with patterns free from the limitation of Si crystalline orientation are also obtained. With closed-loop scan control of a scanning probe microscope, the length of patterned lines is more than 100 μm by integrating several steps of patterning. The fabrication process is optimized in order to produce a mould pattern with a line width about 10 nm. The structures on the mould are further duplicated into PMMA resists through the nanoimprinting process. The method of combining scanning probe lithography with wet chemical etching or reactive ion etching (RIE) provides a resistless route for the fabrication of nanoimprinting moulds

  2. Fabrication of tungsten wire reinforced nickel-base alloy composites

    Brentnall, W. D.; Toth, I. J.

    1974-01-01

    Fabrication methods for tungsten fiber reinforced nickel-base superalloy composites were investigated. Three matrix alloys in pre-alloyed powder or rolled sheet form were evaluated in terms of fabricability into composite monotape and multi-ply forms. The utility of monotapes for fabricating more complex shapes was demonstrated. Preliminary 1093C (2000F) stress rupture tests indicated that efficient utilization of fiber strength was achieved in composites fabricated by diffusion bonding processes. The fabrication of thermal fatigue specimens is also described.

  3. Fabrication of submicron proteinaceous structures by direct laser writing

    Serien, Daniela [Center for International Research on Integrative Biomedical Systems, Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, 153-8505 Tokyo (Japan); Takeuchi, Shoji, E-mail: takeuchi@iis.u-tokyo.ac.jp [Center for International Research on Integrative Biomedical Systems, Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, 153-8505 Tokyo (Japan); ERATO Takeuchi Biohybrid Innovation Project, Japan Science and Technology Agency, 4-6-1 Komaba, Meguro-ku, 153-8505 Tokyo (Japan)

    2015-07-06

    In this paper, we provide a characterization of truly free-standing proteinaceous structures with submicron feature sizes depending on the fabrication conditions by model-based analysis. Protein cross-linking of bovine serum albumin is performed by direct laser writing and two-photon excitation of flavin adenine dinucleotide. We analyze the obtainable fabrication resolution and required threshold energy for polymerization. The applied polymerization model allows prediction of fabrication conditions and resulting fabrication size, alleviating the application of proteinaceous structure fabrication.

  4. Razonamiento covariacional en el estudio de funciones cuadráticas

    Jhony Alexander Villa-Ochoa

    2012-10-01

    Full Text Available En este artículo se usa el marco conceptual de Carlson et al. (2003 para discutir los resultados de un estudio de caso, el cual describe la forma como un estudiante razona covariacionalmente al enfrentarse a situaciones de variación asociadas a funciones cuadráticas. El estudio se ideó para desarrollar una línea convergente de indagación (Yin, 2009, la cual se centró en las descripciones que el estudiante realizaba a medida que abordaba las situaciones diseñadas para el estudio; dichas descripciones fueron trianguladas con las producciones escritas y los elementos teóricos. Desde las acciones que el estudiante evidenció, se pudo observar que el proceso de razonamiento covariacional no es un proceso lineal pero sí recursivo. Así mismo, este estudio de caso pone en evidencia el hecho de que existen estudiantes que pueden aproximarse a una interpretación variacional de las concavidades de una gráfica, sin que ello exija un estudio previo del cálculo diferencial. Del estudio se desprenden algunas implicaciones tanto para el marco conceptual abordado en este estudio como para el diseño de situaciones orientadas al aula de clase.

  5. One-step fabrication of multifunctional micromotors

    Gao, Wenlong; Liu, Mei; Liu, Limei; Zhang, Hui; Dong, Bin; Li, Christopher Y.

    2015-08-01

    Although artificial micromotors have undergone tremendous progress in recent years, their fabrication normally requires complex steps or expensive equipment. In this paper, we report a facile one-step method based on an emulsion solvent evaporation process to fabricate multifunctional micromotors. By simultaneously incorporating various components into an oil-in-water droplet, upon emulsification and solidification, a sphere-shaped, asymmetric, and multifunctional micromotor is formed. Some of the attractive functions of this model micromotor include autonomous movement in high ionic strength solution, remote control, enzymatic disassembly and sustained release. This one-step, versatile fabrication method can be easily scaled up and therefore may have great potential in mass production of multifunctional micromotors for a wide range of practical applications.Although artificial micromotors have undergone tremendous progress in recent years, their fabrication normally requires complex steps or expensive equipment. In this paper, we report a facile one-step method based on an emulsion solvent evaporation process to fabricate multifunctional micromotors. By simultaneously incorporating various components into an oil-in-water droplet, upon emulsification and solidification, a sphere-shaped, asymmetric, and multifunctional micromotor is formed. Some of the attractive functions of this model micromotor include autonomous movement in high ionic strength solution, remote control, enzymatic disassembly and sustained release. This one-step, versatile fabrication method can be easily scaled up and therefore may have great potential in mass production of multifunctional micromotors for a wide range of practical applications. Electronic supplementary information (ESI) available: Videos S1-S4 and Fig. S1-S3. See DOI: 10.1039/c5nr03574k

  6. Nuclear fuel elements design, fabrication and performance

    Frost, Brian R T

    1982-01-01

    Nuclear Fuel Elements: Design, Fabrication and Performance is concerned with the design, fabrication, and performance of nuclear fuel elements, with emphasis on fast reactor fuel elements. Topics range from fuel types and the irradiation behavior of fuels to cladding and duct materials, fuel element design and modeling, fuel element performance testing and qualification, and the performance of water reactor fuels. Fast reactor fuel elements, research and test reactor fuel elements, and unconventional fuel elements are also covered. This volume consists of 12 chapters and begins with an overvie

  7. Nanowire and microwire fabrication technique and product

    Sumant, Anirudha V.; Zach, Michael; Marten, Alan David

    2018-02-27

    A continuous or semi-continuous process for fabricating nanowires or microwires makes use of the substantially planar template that may be moved through electrochemical solution to grow nanowires or microwires on exposed conductive edges on the surface of that template. The planar template allows fabrication of the template using standard equipment and techniques. Adhesive transfer may be used to remove the wires from the template and in one embodiment to draw a continuous wire from the template to be wound around the drum.

  8. Deformation and Fabric in Compacted Clay Soils

    Wensrich, C. M.; Pineda, J.; Luzin, V.; Suwal, L.; Kisi, E. H.; Allameh-Haery, H.

    2018-05-01

    Hydromechanical anisotropy of clay soils in response to deformation or deposition history is related to the micromechanics of platelike clay particles and their orientations. In this article, we examine the relationship between microstructure, deformation, and moisture content in kaolin clay using a technique based on neutron scattering. This technique allows for the direct characterization of microstructure within representative samples using traditional measures such as orientation density and soil fabric tensor. From this information, evidence for a simple relationship between components of the deviatoric strain tensor and the deviatoric fabric tensor emerge. This relationship may provide a physical basis for future anisotropic constitutive models based on the micromechanics of these materials.

  9. Architectural Geometry and Fabrication-Aware Design

    Pottmann, Helmut

    2013-04-27

    Freeform shapes and structures with a high geometric complexity play an increasingly important role in contemporary architecture. While digital models are easily created, the actual fabrication and construction remains a challenge. This is the source of numerous research problems many of which fall into the area of Geometric Computing and form part of a recently emerging research area, called "Architectural Geometry". The present paper provides a short survey of research in Architectural Geometry and shows how this field moves towards a new direction in Geometric Modeling which aims at combining shape design with important aspects of function and fabrication. © 2013 Kim Williams Books, Turin.

  10. Design of the MOX fuel fabrication facility

    Johnson, J.V.; Brabazon, E.J.

    2001-01-01

    A consortium of Duke Engineering and Services, Inc., COGEMA, Inc. and Stone and Webster (DCS) are designing a mixed oxide fuel fabrication facility (MFFF) for the U.S. Department of Energy (DOE) to convert surplus plutonium to mixed oxide (MOX) fuel to be irradiated in commercial nuclear power plants based on the proven European technology of COGEMA and BELGONUCLEAIRE. This paper describes the MFFF processes, and how the proven MOX fuel fabrication technology is being adapted as required to comply with U.S. requirements. (author)

  11. A new RFQ linac fabrication technique

    Schrage, D.; Roybal, P.; Young, L.; Clark, W.; DePaula, R.; Martinez, F.

    1994-01-01

    The use of hydrogen furnace brazing has been applied as a joining technology to the fabrication of a Radio-Frequency-Quadrupole (RFQ) linac for the Los Alamos Accelerator Performance Demonstration Facility (APDF). The design concept provides a monolithic cavity with no longitudinal rf, vacuum, or mechanical joints. A 530 MHz, 0.46 meter long engineering model RFQ has been fabricated and tested at the Los Alamos National Laboratory as a technical demonstration of this concept. It is planned that two funneled RFQ's for the APDF (7 MeV, 350 MHz, 100 mAmp CW, each eight meters in length) will be manufactured by this method

  12. Antenna Fabrication using 3D printing techniques

    Elibiary, Ahmed

    2017-01-01

    This thesis focuses to explore the use of additive manufacturing (AM) techniques to fabricate various radio frequency (RF) devices. 3D printing, a term used for AM has evolved to the point where it is being introduced into various industries, one of these, discussed in this thesis is the fabrication of antennas for the aim to reduce manufacturing costs and time.\\ud The aim is to investigate the performance and reliability of a modified low-cost 3D printer to print plastic and metal simultaneo...

  13. Design of the MOX fuel fabrication facility

    Johnson, J.V. [MFFF Technical Manager, U.S. dept. of Energy, Washington, DC (United States); Brabazon, E.J. [MFFF Engineering Manager, Duke Cogema Stone and Webster, Charlotte, NC (United States)

    2001-07-01

    A consortium of Duke Engineering and Services, Inc., COGEMA, Inc. and Stone and Webster (DCS) are designing a mixed oxide fuel fabrication facility (MFFF) for the U.S. Department of Energy (DOE) to convert surplus plutonium to mixed oxide (MOX) fuel to be irradiated in commercial nuclear power plants based on the proven European technology of COGEMA and BELGONUCLEAIRE. This paper describes the MFFF processes, and how the proven MOX fuel fabrication technology is being adapted as required to comply with U.S. requirements. (author)

  14. Lithography requirements in complex VLSI device fabrication

    Wilson, A.D.

    1985-01-01

    Fabrication of complex very large scale integration (VLSI) circuits requires continual advances in lithography to satisfy: decreasing minimum linewidths, larger chip sizes, tighter linewidth and overlay control, increasing topography to linewidth ratios, higher yield demands, increased throughput, harsher device processing, lower lithography cost, and a larger part number set with quick turn-around time. Where optical, electron beam, x-ray, and ion beam lithography can be applied to judiciously satisfy the complex VLSI circuit fabrication requirements is discussed and those areas that are in need of major further advances are addressed. Emphasis will be placed on advanced electron beam and storage ring x-ray lithography

  15. Fabrication of longitudinally arbitrary shaped fiber tapers

    Nold, J.; Plötner, M.; Böhme, S.; Sattler, B.; deVries, O.; Schreiber, T.; Eberhardt, R.; Tünnermann, A.

    2018-02-01

    We present our current results on the fabrication of arbitrary shaped fiber tapers on our tapering rig using a CO2-laser as heat source. Single mode excitation of multimode fibers as well as changing the fiber geometry in an LPG-like fashion is presented. It is shown that this setup allows for reproducible fabrication of single-mode excitation tapers to extract the fundamental mode (M2 < 1.1) from a 30 μm core having an NA of 0.09.

  16. High yield fabrication of fluorescent nanodiamonds

    Boudou, Jean-Paul; Curmi, Patrick A [Structure and Activity of Normal and Pathological Biomolecules-INSERM/UEVE U829, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf [3.Physikalisches Institut, University of Stuttgart, Pfaffenwaldring 57, D-70550 Stuttgart (Germany); Aubert, Pascal [Nanometric Media Laboratory, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Sennour, Mohamed; Thorel, Alain [Centre des Materiaux, Mines Paris, ParisTech, BP 87, F-91000 Evry (France); Gaffet, Eric [Nanomaterials Research Group-UMR 5060, CNRS, UTBM, Site de Sevenans, F-90010 Belfort (France)], E-mail: jpb.cnrs@free.fr, E-mail: pcurmi@univ-evry.fr, E-mail: f.jelezko@physik.uni-stuttgart.de

    2009-06-10

    A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

  17. Fabrication of FFTF fuel pin wire wrap

    Epperson, E.M.

    1980-06-01

    Lateral spacing between FFTF fuel pins is required to provide a passageway for the sodium coolant to flow over each pin to remove heat generated by the fission process. This spacing is provided by wrapping each fuel pin with type 316 stainless steel wire. This wire has a 1.435mm (0.0565 in.) to 1.448mm (0.0570 in.) diameter, contains 17 +- 2% cold work and was fabricated and tested to exacting RDT Standards. About 500 kg (1100 lbs) or 39 Km (24 miles) of fuel pin wrap wire is used in each core loading. Fabrication procedures and quality assurance tests are described

  18. High yield fabrication of fluorescent nanodiamonds

    Boudou, Jean-Paul; Curmi, Patrick A; Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf; Aubert, Pascal; Sennour, Mohamed; Thorel, Alain; Gaffet, Eric

    2009-01-01

    A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

  19. Familias reconstituidas: Un estudio sobre las nuevas estructuras familiares

    ISABEL ESPINAR FELLMANN

    2003-01-01

    Full Text Available En la mayoría de las investigaciones sobre la familia, los estudios se han centrado en las familias intactas o primeras familias. Sin embargo, es cada vez mayor el número de familias cuya configuración incluye un segundo matrimonio e hijos de una unión anterior (i.e. familias reconstituidas. En la consolidación del complejo proceso de ajuste de estas familias se han identificado unas fuentes comunes de estrés relacionadas principalmente con la formación de un nuevo sistema familiar. El objetivo de este artículo es realizar una revisión de las variables que inciden en el bienestar y/o malestar psicológico sobre una muestra de padrastros y madrastras españoles en el seno de estas nuevas configuraciones familiares. En una primera fase se realizaron, desde un diseño cualitativo, 20 entrevistas en profundidad a una muestra de padrastros y madrastras. En una segunda fase, se diseñó un cuestionario que fue respondido por 77 sujetos con la finalidad de analizar la posible relación entre alguna de las variables estudiadas.

  20. Actividad metacognitiva en estudiantes universitarios: un estudio preliminar

    Kelly Cantillo Anaya

    2014-01-01

    Full Text Available Esta investigación tuvo como objetivo dar cuenta de niveles de actividad metacognitiva en estudiantes universitarios, estableciendo diferencias en función de variables como la edad y semestre acadé - mico de los participantes, para lo cual se utilizó el Cuestionario de Autorreporte de Actividad Metacognitiva. En el estudio participa - ron 95 estudiantes de ambos sexos, que cursaban primero, quinto y décimo semestre en un programa de psicología de una universidad pública. Los datos arrojados permiten establecer que la actividad metacognitiva, en relación tanto con el semestre como con la edad en la muestra estudiada, se ubica en un nivel medio bajo. En ninguno de los semestres, ni en los rangos de edad se registran niveles altos en los componentes de Conciencia, Control y Autopoiesis. No se encontró correlación significativa entre actividad metacognitiva y semestre aca - démico cursado, como tampoco con la edad.

  1. Breve estudio comparativo de los modernos medios de transporte terrestre

    de Andrés Conde, M. Carmen

    1974-04-01

    Full Text Available Interurban Planning Section General Division of Highways and Subsidiary Roads In this study a series of data regarding the modern means of transport, available at present, are being compiled and compared in order to facilitate the choice of the most suitable one for each case. In order to understand better the various using conditions we have listed the most prominent known characteristics of each of them in alphabetical order in the definitions. With some of these characteristics as a point of departure, such as speed and capacity we have obtained criteria as to the application field of every means of transport.En este estudio se recopilan y comparan una serie de datos actualmente disponibles sobre modernos medios de transporte terrestre, con objeto de facilitar la elección del más adecuado en cada caso. Para ayudar a la comprensión de sus condiciones de explotación, se han resumido en las definiciones las características conocidas más destacadas de cada uno de ellos, ordenándolos por orden alfabético. A partir de algunas de estas características de explotación, como velocidad y capacidad, se han obtenido criterios sobre el campo de aplicación de cada medio de transporte.

  2. INTELIGENCIA Y RENDIMIENTO DEPORTIVO: UN ESTUDIO SOBRE LA INTELIGENCIA EMOCIONAL

    Gerardo Araya Vargas

    2001-06-01

    Full Text Available Este estudio tuvo el propósito de determinar la correlación entre los índices de inteligencia tradicional (razonamiento analógico, C. I. e inteligencia emocional (C.E. con el rendimiento deportivo. Participaron 10 basketbolistas, entre los 17 y 25 años (media = 20.1 años, todas mujeres. Se les aplicó pruebas de C. I. (Raven y de C. E. (Goleman y luego se sometió a los sujetos a dos pruebas de precisión (tiro libre y tiro de tres puntos y posteriormente el entrenador evaluó mediante la Escala de Rendimiento Emocional Percibido por el Técnico, la capacidad de manejo emocional de las basketbolistas en situación de juego. El puntaje de C. E. se correlacionó significativamente (r=0.71; p < 0.05 con la precisión en el tiro de tres puntos. En los otros casos las correlaciones fueron bajas y no significativas. La evaluación del entrenador mostró (rbis = -0.87; p < 0.05 correlación significativa y negativa entre el índice C. E. y la percepción del efecto negativo de las emociones sobre el rendimiento, por tanto existe evidencia preliminar de que este índice podría ser valioso como predictor del rendimiento en circunstancias de alta exigencia.

  3. Cuidadores de Cartagena y su contexto de cuidado: estudio comparativo

    Amparo Montalvo-Prieto

    2009-01-01

    Full Text Available Objetivo: comparar las características sociodemográficas y de relación de cuidado de cuidadores de niños y adultos con enfermedades crónicas discapacitantes de Cartagena, Colombia. Método: estudio descriptivo, cuantitativo, de corte transversal. Se realizó un muestreo no probabilístico, por conveniencia, entre el 2006 y el 2007. Participaron 300 cuidadores: 98 de niños y 202 de adultos con enfermedades crónicas. Se utilizó la encuesta de caracterización de los cuidadores. Para describir las asociaciones entre las variables seleccionadas se empleó el análisis factorial de correspondencias múltiples. Resultados: ser cuidador de niños se asoció con ser padre o madre, ejercer el rol durante 37 meses o más, dedicarse a actividades del hogar y estar en unión libre. Ser cuidador de adultos se asoció con pacientes mayores, llevar 36 meses o menos como cuidador, ser hijo del paciente y estar casado. Conclusiones: las variables que mejor diferenciaron los dos grupos de cuidadores fueron nivel socioeconómico, estado civil y tiempo de dedicación al cuidado. El grupo de cuidadores de adultos presentó mayor variabilidad en las distintas categorías estudiadas.

  4. humano. Un estudio en 3º de ESO

    Jesús Ramón Girón Gambero

    2015-01-01

    alimentos. La investigación se ha llevado a cabo con el objetivo de estudiar el desempeño del alumnado en elanálisis de un video publicitario en un contexto real de aula, mediante un estudio de caso en 3º de EducaciónSecundaria Obligatoria. Se utiliza un anuncio televisivo que incluye un modelo para explicar cómo actúa unconocido producto probiótico en el organismo. Para obtener datos y evidencias se han utilizado el diario delprofesor, grabaciones en vídeo de las clases y los cuadernos de trabajo de los estudiantes. En los resultados sedestacan los elementos más fácilmente interpretables y las dificultades del alumnado para comprender el modelodel anuncio. Finalmente, como implicación educativa, se formulan algunas ideas que podrían formar parte de un modelo escolar que explique cómo actúan las defensas en el intestino humano, integrando aquellos aspectos positivos identificados en el anuncio con algunos elementos de los propios modelos de los alumnos y las ideas científicas al respecto.

  5. Estudio sobre las motivaciones para recorrer el Camino de Santiago

    Antonio Granero Gallegos

    2007-09-01

    Full Text Available Este estudio se ha centrado en conocer las motivaciones del viajero jacobeo actual, mayor de 15 años, que andando o en bicicleta recorre el Camino de Santiago, analizando las relaciones referentes a las necesidades de evasión de la vida cotidiana y la experiencia activa a través de la actividad físico-deportiva. La investigación se ha desarrollado mediante la aplicación de un cuestionario autoadministrado a una muestra de 1.071 sujetos, utilizando el procedimiento de muestreo estratificado polietápico con afijación proporcional, con un margen de error muestral del ± 3 % y un nivel de confianza del 95,5%. Los resultados han puesto de manifiesto la adaptación de esta ruta, tradicionalmente recorrida por motivos religiosos, a la época contemporánea, constituyendo, en la actualidad, un escenario en el que están presentes los distintos elementos del ocio y las actividades físico-deportivo-recreativas en el medio natural, vinculada con el turismo rural, deportivo, de aventura o cultural, y donde el sujeto busca también alejarse del cotidiano estrés urbano.

  6. Proyectos educativos: estudio comparativo entre Venezuela y Colombia

    Mineira Finol

    2005-09-01

    Full Text Available El Proyecto Educativo Integral Comunitario (PEIC y el Proyecto Educativo Institucional constituyen la categoría de comparación entre Venezuela y Colombia; a tal fin, este estudio de tipo comparativo-documental se centró en determinar congruencias y discrepancias entre PEIC y PEI, utilizando el método comparativo estructurado en cuatro fases: descripción, interpretación, yuxtaposición y comparación, propuesto por Hilker y Bereday (1972 Entre los resultados se tienen: congruencias en cuanto surgen sobre las bases de diagnóstico externos efectuados por organismos internacionales UNESCO, CEPAL ante la inefectividad y baja productividad de ambos países; a nivel interno responden a políticas educativas reformadoras de currículum y leyes,. Discrepancias referidas al tiempo de implementación; en Venezuela a partir de 1996; Colombia en 1992; este último, consolidó las bases para la participación a través del gobierno escolar y de un sistema de evaluación institucional, muy incipiente en Venezuela.

  7. Estudio de los componentes antioxidantes y actividad antioxidante en tomates

    Luz M. Zapata

    2007-01-01

    Full Text Available El objetivo de este estudio fue investigar la concentración de los componentes antioxidantes presentes en el tomate y la actividad antioxidante total durante su crecimiento, almacenamiento, maduración y comercialización. Los antioxidantes analizados fueron: licopeno, β-caroteno, ácido L-ascórbico y fenoles totales. La actividad antioxidante se midió utilizando los métodos: "Ferric reducing/antioxidant power" (FRAP y decoloración del β-caroteno. Los antioxidantes ácido L-ascórbico, licopeno y β-caroteno fueron 2,6 veces mayor en la comercialización respecto de los valores iniciales, mientras que la actividad antioxidante en la última etapa fue 2,1 y 3,5 veces más alta que en el crecimiento para los métodos FRAP y decoloración de b-caroteno, respectivamente. En consecuencia, el consumidor dispone de un fruto rico en antioxidantes, lo que le atribuye la capacidad de captación de los radicales libres presentes en nuestro cuerpo que podrían disminuir los riesgos que contraer enfermedades crónicas.

  8. Auto concept y rasgos de personalidad: Un estudio correlacional

    Débora Cecílio Fernandes

    Full Text Available Este estudio ha investigado las relaciones entre los rasgos de personalidad y auto concepto. Fueron aplicadas la Escala de Traços de Personalidade para Crianças y la Escala de Autoconceito Infanto-Juvenil en 389 niños, con edad de 8 a 10 años de escuelas públicas y particulares. Se han hallado diferencias de sexo para casi todas las medidas hechas. Para los varones, ha sido observado correlaciones positivas entre extroversión y auto conceptos escolar y familiar, neuroticismo y psicoticismo con auto conceptos personal y social, y sociabilidad con auto concepto familiar; y correlaciones negativas entre extroversión y auto concepto social, psicoticismo y auto concepto familiar, y sociabilidad y auto concepto personal. Para las niñas, fueron observadas correlaciones positivas entre el auto concepto social y psicoticismo y sociabilidad con el familiar; y correlaciones negativas entre extroversión y el social, psicoticismo y neuroticismo con el familiar. Los análisis de los grupos extremos confirmaron los datos encontrados.

  9. La periferia: voz y sentido en los estudios urbanos

    Daniel Hiernaux

    2004-01-01

    Full Text Available En este trabajo exploramos la voz ‘periferia’ el contexto latinoamericano: cómo cambia tiempo que el fenómeno denotado se transforma y cómo agrega nuevos componentes en el diálogo entre la palabra y el fenómeno. Por ser una voz reciente, también revisamos otras voces emparentadas (‘arrabal’ y ‘suburbio’, reconstruyendo el uso y sentido cada una de ellas y la sustitución de unas otras hasta que aparece la palabra ‘periferia’. La expansión de las metrópolis y la constitución de amplios espacios periféricos sido de mucho interés en los estudios urbanos. No obstante, hay numerosos aspectos poco analizados. En el primer apartado revisamos voces antecedentes. Luego reconstruimos contexto en el que se comienza a referir territorio de expansión de la ciudad con palabra ‘periferia’, así como sus implicaciones en cuanto al sentido de la voz. En el apartado siguiente analizamos las dimensiones que incorporó la voz ‘periferia’ en relación procesos urbanos; para terminar con los desafíos actuales en torno a ese territorio las formas de nombrarlo

  10. VIOLENCIAS PATRIARCALES EN LOS ENTORNOS VIRTUALES. UN ESTUDIO CON ADOLESCENTES

    Trinidad Donoso-Vázquez

    2016-05-01

    Full Text Available En este estudio se analizan las violencias patriarcales que tienen lugar en los entornos virtuales. La muestra está formada por 155 adolescentes de primer curso de educación segundaria obligatoria (12 años y cuarto de educación secundaria obligatoria (16 años de la ciudad de Barcelona (España. Un 51,4% eran chicas y un 48,6% chicos. Se aplicó una escala tipo Likert de tres alternativas de respuesta. La escala constaba de 23 ítems que describían agresiones realizadas en los entornos virtuales (nunca, algunas veces, muchas veces. La escala muestra una fiabilidad alta en relación al índice de Alpha de Cronbach, (0,887 lo que indica una adecuada consistencia interna de sus ítems. Los resultados demuestran que internet es un espacio generizado, donde los ataques se realizan por no cumplir los impuestos normativos asignados a los géneros. Es preocupante que en todos los indicadores los chicos puntúen más alto que las chicas menos en los ítems que tienen que ver con el control y posesión de la pareja y en estereotipos sexistas femeninos.

  11. Convivencia escolar. Un estudio sobre buenas prácticas

    María José Caballero Grande

    2010-06-01

    Full Text Available Este trabajo de investigación se centra en la convivencia escolar y puede enmarcarse en la línea de educación para la paz.La finalidad del mismo ha sido conocer algunas peculiaridades de prácticas educativas  que fomentan la paz y la convivencia en el ámbito escolar. Para esto, se ha recogido información, mediante entrevista estructurada, en diez centros  educativos de la provincia de Granada, acogidos a la Red Andaluza  “Escuela, espacio de paz”, sobre la puesta en marcha, desarrollo y evaluación de actuaciones encaminadas hacia la cohesión del grupo, la gestión democrática de normas, la educación en valores, las habilidades socioemocionales y la regulación pacífica de conflictos.Del análisis de las entrevistas, se desprende que hay una serie de medidas y actuaciones que se llevan a cabo en los centros educativos que favorecen la buena convivencia. La necesidad de cooperación entre todos los actores intervinientes en el proceso educativo o  la importancia de sistematizar e institucionalizar el trabajo que eduque para el fomento de una cultura de paz, conforman entre otras las conclusiones a las que se llega en este estudio.

  12. Estudio de Caso de la Experiencia Subjetiva del Cuerpo

    Edith Flores Pérez

    2007-01-01

    Full Text Available Estudio de caso que explora la experiencia subjetiva del cuerpo en la trayectoria con el uso de drogas a través del relato de vida. Se utilizó la entrevista abierta bajo los supuestos metodológicos del relato autobiográfico. Se propuso al participante “Hablar de sí mismo y contar su experiencia con el uso de drogas”. La estrategia analítica se diseñó con base en la propuesta de Barthes (1990 para el análisis estructural de los relatos. Los resultados muestran que en el relato emerge una subjetividad que articula modos de haber sido y ser cuerpo como instancias constitutivas de la existencia. Desde el punto de vista de la corporalidad, la trayectoria con el uso de drogas deviene en una relación de saber-poder con el propio cuerpo, donde la experiencia subjetiva se entreteje en una red de controles y normas sociales. El análisis del cuerpo como experiencia enriquece la comprensión de prácticas como el uso de drogas.

  13. Razonamiento covariacional en el estudio de funciones cuadráticas

    Jhony Alexander Villa-Ochoa

    2012-01-01

    En este artículo se usa el marco conceptual de Carlson et al. (2003) para discutir los resultados de un estudio de caso, el cual describe la forma como un estudiante razona covariacionalmente al enfrentarse a situaciones de variación asociadas a funciones cuadráticas. El estudio se ideó para desarrollar una línea convergente de indagación (Yin, 2009), la cual se centró en las descripciones que el estudiante realizaba a medida que abordaba las situaciones diseñadas para el estudio; dichas ...

  14. ESTUDIO SOBRE LA DINÁMICA TEMPORAL DE MATERIAL PARTICULADO PM 10 EMITIDO EN COCHABAMBA, BOLIVIA

    Salini Calderón, Giovanni Angelo; Medina Mitma, Evelin Jhovana

    2017-01-01

    RESUMEN En este documento se presenta un estudio de series temporales de PM10 que muestran la mala calidad del aire en Cochabamba, mediante parámetros estadísticos usados en estudios sobre dinámica no lineal. El promedio diario de PM10 sigue patrones similares al de grandes ciudades que poseen altos índices de contaminación ambiental. Uno de los parámetros resultó del mismo orden y característica que los presentados en trabajos similares sobre el estudio de caoticidad en variables de contamin...

  15. Estudio de la cultura, sus manifestaciones y efectos en una Red Inter-Organizacional

    Guevara Alarcon, Laura Natalie

    2015-01-01

    El presente trabajo tiene como propósito el estudio de la cultura, y el impacto que tiene esta en una red inter-organizacional. Para esto se realizó un estudio documental en el cual se hizo una revisión bibliográfica de los principales conceptos relacionados con la cultura y el enfoque de trabajo en red. Asimismo para dar cumplimiento al objetivo de la investigación, se realizó el análisis de varios estudios empíricos que muestran las relaciones entre cultura y redes y que a su vez re...

  16. Estudio de la variabilidad genética en camélidos bolivianos

    Barreta Pinto, Julia

    2013-01-01

    El estudio de los camélidos sudamericanos es de gran interés en los países andinoscomo Perú, Bolivia, Chile, Argentina, debido a su importante valor económico y suimportancia en el mantenimiento y desarrollo de las poblaciones rurales en dichos países. Dada la falta de estudios genéticos centrados en las poblaciones de camélidos quehabitan en Bolivia, y la necesidad de realizar una valoración de la diversidad genética deestas poblaciones, la presente Tesis doctoral ha abordado el estudio gené...

  17. El estudio de las psicopatologías en Puerto Rico

    Alfonso Martínez Taboas

    1995-01-01

    El estudio de las psicopatologías en Puerto Rico fue un campo poco productivo durante las primeras siete décadas de este siglo. Durante este término de tiempo las publicaciones profesionales fueron exiguas y mayormente anecdóticas. Sin embargo, la década de los años ochenta fue una muy productiva en términos de publicaciones profesionales y estudios de corte empírico. Principalmente se destacan una serie programática de estudios epidemiológicos que abarcan poblaciones de niñ...

  18. Caractereisticas de la dieta de una muestra de adolescentes con sobrepeso y obesidad: estudio EVASYON

    Suárez, N.; Wärnberg, Julia; Zapatera, Belén; Campoy, Cristina; Martí, Amelia; Garragori, J. M.; Marcos, Ascensión

    2014-01-01

    La prevalencia de sobrepeso y obesidad en niños y adolescentes ha aumentado en los últimos años en nuestro país, liderando la prevalencia europea de obesidad infantil. El propósito de este estudio es obtener información sobre la calidad de la dieta de una muestra de adolescentes con sobrepeso y obesidad antes de comenzar un estudio de intervención integral de nutrición, actividad física y psicología EVASYON es un estudio multicéntrico realizado en 5 hospitales españoles (Granada, Madrid, Pamp...

  19. Estudio del estado del arte y perspectivas de los metales críticos

    Lluch Fruns, Nuria

    2015-01-01

    El presente proyecto esta centrado en el estudio del estado del arte y las perspectivas de los metales críticos, seleccionados por su estado geopolítico, riesgo que supone su escasez en el suministro y su correspondiente riesgo medioambiental. Los metales en los que se basa el siguiente estudio aparecen listados a continuación (por orden alfabético): Antimonio, Berilio, Cobalto, Galio, Indio, Metales del Grupo Platino, Niobio, Tantalio y Tungsteno. El estudio consta de una defi...

  20. Estudio por espectroscopia Raman-IR del estado de orden en materia carbonosa

    Carbajo Hijarrubia, Juan

    2016-01-01

    La espectroscopia Raman es una técnica analítica no destructiva y no intrusiva recientemente introducida en el estudio de la paleobiología. En esta línea se pretende emplear está técnica en el estudio de la posible vida en Marte y en el estudio de la vida en la Tierra. El empleo de la espectroscopia micro Raman nos permite analizar en detalle las muestras a la escala típica del grano mineral. La espectroscopia Raman muestra la información vibracional de los grupos moleculares y su ordenamient...

  1. Simple process to fabricate nitride alloy powders

    Yang, Jae Ho; Kim, Dong-Joo; Kim, Keon Sik; Rhee, Young Woo; Oh, Jang-Soo; Kim, Jong Hun; Koo, Yang Hyun

    2013-01-01

    Uranium mono-nitride (UN) is considered as a fuel material [1] for accident-tolerant fuel to compensate for the loss of fissile fuel material caused by adopting a thickened cladding such as SiC composites. Uranium nitride powders can be fabricated by a carbothermic reduction of the oxide powders, or the nitriding of metal uranium. Among them, a direct nitriding process of metal is more attractive because it has advantages in the mass production of high-purity powders and the reusing of expensive 15 N 2 gas. However, since metal uranium is usually fabricated in the form of bulk ingots, it has a drawback in the fabrication of fine powders. The Korea Atomic Energy Research Institute (KAERI) has a centrifugal atomisation technique to fabricate uranium and uranium alloy powders. In this study, a simple reaction method was tested to fabricate nitride fuel powders directly from uranium metal alloy powders. Spherical powder and flake of uranium metal alloys were fabricated using a centrifugal atomisation method. The nitride powders were obtained by thermal treating the metal particles under nitrogen containing gas. The phase and morphology evolutions of powders were investigated during the nitriding process. A phase analysis of nitride powders was also part of the present work. KAERI has developed the centrifugal rotating disk atomisation process to fabricate spherical uranium metal alloy powders which are used as advanced fuel materials for research reactors. The rotating disk atomisation system involves the tasks of melting, atomising, and collecting. A nozzle in the bottom of melting crucible introduces melt at the center of a spinning disk. The centrifugal force carries the melt to the edge of the disk and throws the melt off the edge. Size and shape of droplets can be controlled by changing the nozzle size, the disk diameter and disk speed independently or simultaneously. By adjusting the processing parameters of the centrifugal atomiser, a spherical and flake shape

  2. A facile fabrication of multifunctional knit polyester fabric based on chitosan and polyaniline polymer nanocomposite

    Tang, Xiaoning; Tian, Mingwei; Qu, Lijun; Zhu, Shifeng; Guo, Xiaoqing; Han, Guangting; Sun, Kaikai; Hu, Xili; Wang, Yujiao; Xu, Xiaoqi

    2014-10-01

    Knit polyester fabric was successively modified and decorated with chitosan layer and polyaniline polymer nanocomposite layer in this paper. The fabric was firstly treated with chitosan to form a stable layer through the pad-dry-cure process, and then the polyaniline polymer nanocomposite layer was established on the outer layer by in situ chemical polymerization method using ammonium persulfate as oxidant and chlorhydric acid as dopant. The surface morphology of coated fabric was characterized by scanning electron microscopy (SEM), and the co-existence of chitosan layer and granular polyaniline polymer nanocomposite was confirmed and well dispersed on the fabric surface. The resultant fabric was endowed with remarkable electrical conductivity properties and efficient water-repellent capability, which also have been found stable after water laundering. In addition, the photocatalytic decomposition activity for reactive red dye was observed when the multifunctional knit polyester fabric was exposed to the illumination of ultraviolet lamp. These results indicated that chitosan and polyaniline polymer nanocomposite could form ideal multifunctional coatings on the surface of knit polyester fabric.

  3. Modos de discurso y actitudes En grupos de discusión. Un estudio comparativo de mujeres y hombres

    María Jesús Cala Carrillo

    2005-01-01

    Full Text Available El objetivo fundamental de este trabajo es el de analizar cómo la relación entre factores comoel género y la experiencia educativa afectan a las actitudes que mantienen hombres y mujeressobre temas como la situación de las mujeres y los hombres y la educación de hijas e hijos. Paraello hemos realizado un análisis de las actitudes en el marco del discurso, adoptando para ellouna aproximación alternativa a la que tradicionalmente se ha mantenido en este campo. Uno denuestros mayores esfuerzos se ha ido encaminado a la elaboración de herramientas metodológicasque nos permitan analizar las actitudes de manera exhaustiva y que nos posibiliten conocer ycomprender a través de qué mecanismos argumentativos se están defendiendo actitudes más omenos igualitarias con respecto a las mujeres y a las prácticas en las que éstas participan o debenparticipar y cómo las diferencias entre mujeres y hombres están mediadas por la experienciaeducativa. En últimas, asumimos que este tipo de experiencia cultural puede favorecer nuevosmodos de discurso y, consecuentemente, nuevos modos de pensamiento.

  4. A review: fabrication of porous polyurethane scaffolds.

    Janik, H; Marzec, M

    2015-03-01

    The aim of tissue engineering is the fabrication of three-dimensional scaffolds that can be used for the reconstruction and regeneration of damaged or deformed tissues and organs. A wide variety of techniques have been developed to create either fibrous or porous scaffolds from polymers, metals, composite materials and ceramics. However, the most promising materials are biodegradable polymers due to their comprehensive mechanical properties, ability to control the rate of degradation and similarities to natural tissue structures. Polyurethanes (PUs) are attractive candidates for scaffold fabrication, since they are biocompatible, and have excellent mechanical properties and mechanical flexibility. PU can be applied to various methods of porous scaffold fabrication, among which are solvent casting/particulate leaching, thermally induced phase separation, gas foaming, emulsion freeze-drying and melt moulding. Scaffold properties obtained by these techniques, including pore size, interconnectivity and total porosity, all depend on the thermal processing parameters, and the porogen agent and solvents used. In this review, various polyurethane systems for scaffolds are discussed, as well as methods of fabrication, including the latest developments, and their advantages and disadvantages. Copyright © 2014. Published by Elsevier B.V.

  5. Fabrication of Environmentally Biodegradable Lignin Nanoparticles

    Frangville, C.; Rutkevicius, M.; Richter, A.P.; Velev, O.D.; Stoyanov, S.D.; Paunov, V.N.

    2012-01-01

    We developed a method for the fabrication of novel biodegradable nanoparticles (NPs) from lignin which are apparently non-toxic for microalgae and yeast. We compare two alternative methods for the synthesis of lignin NPs which result in particles of very different stability upon change of pH. The

  6. Fabrication and characterization of a piezoelectric accelerometer

    Reus, Roger De; Gulløv, Jens; Scheeper, Patrick

    1999-01-01

    Zinc oxide based piezoelectric accelerometers were fabricated by bulk micromachining. A high yield was obtained in a relatively simple process sequence. For two electrode configurations a direction selectivity better than 100 was obtained for acceleration in the vertical direction and a selectivity...

  7. Fabrication of universal esthetic lingual button

    Ramkishore Ratre

    2015-01-01

    Full Text Available Lingual buttons are used in many instances for labial, as well as lingual orthodontics. A simple method is demonstrated to fabricate the lingual buttons chair side. The buttons made are aesthetic as they are made from composite resin and can be successfully bonded anywhere on all tooth surfaces.

  8. 1-D nanochannels fabricated in polyimide

    Eijkel, Jan C.T.; Bomer, Johan G.; Tas, Niels Roelof; van den Berg, Albert

    2004-01-01

    A simple method using spin-deposition and sacrificial layer etching is used to fabricate all-polyimide nanochannels (100 and 500 nm channel height). Channels are characterized using spontaneous capillary filling with water, ethanol and isopropanol, and with electroosmotic flow. The channels can be

  9. Tunable metamaterials fabricated by fiber drawing

    Fleming, Simon; Stefani, Alessio; Tang, Xiaoli

    2017-01-01

    We demonstrate a practical scalable approach to the fabrication of tunable metamaterials. Designed for terahertz (THz) wavelengths, the metamaterial is comprised of polyurethane filled with an array of indium wires using the well-established fiber drawing technique. Modification of the dimensions...

  10. Woven fabric composites: Can we peel it?

    Sacchetti, Francisco; Grouve, Wouter Johannes Bernardus; Warnet, Laurent; Villegas, I. Fernandez

    2016-01-01

    The present work focuses on the applicability of the mandrel peel test to quantify the fracture toughness of woven fabric Carbon/PEEK composites. For this purpose, the mandrel peel test was compared to the standardized DCB test. Unstable crack propagation (stick-slip) was observed in both testing

  11. Computation, architectural design and fabrication logic

    Larsen, Niels Martin

    2016-01-01

    Digital fabrication and digital form generation can change the way different professions interact in relation to the development and construction of architecture. The technologies can provide a more integrated design process and expand the architectural vocabulary. At Aarhus School of Architectur...

  12. Chilean fuel elements fabrication progress report

    Baeza, J.; Contreras, H.; Chavez, J.; Klein, J.; Mansilla, R.; Marin, J.; Medina, R.

    1993-01-01

    Due to HEU-LEU core conversion necessity for the Chilean MTR reactors, the Fuel Elements Plant is being implemented to LEU nuclear fuel elements fabrication. A glove box line for powder-compact processing designed at CCHEN, which supposed to operate under an automatic control system, is at present under initial tests. Results of first natural uranium fuel plates manufacturing runs are shown

  13. Fabrication of internally instrumented reactor fuel rods

    Schmutz, J.D.; Meservey, R.H.

    1975-01-01

    Procedures are outlined for fabricating internally instrumented reactor fuel rods while maintaining the original quality assurance level of the rods. Instrumented fuel rods described contain fuel centerline thermocouples, ultrasonic thermometers, and pressure tubes for internal rod gas pressure measurements. Descriptions of the thermocouples and ultrasonic thermometers are also contained

  14. Layerless fabrication with continuous liquid interface production.

    Janusziewicz, Rima; Tumbleston, John R; Quintanilla, Adam L; Mecham, Sue J; DeSimone, Joseph M

    2016-10-18

    Despite the increasing popularity of 3D printing, also known as additive manufacturing (AM), the technique has not developed beyond the realm of rapid prototyping. This confinement of the field can be attributed to the inherent flaws of layer-by-layer printing and, in particular, anisotropic mechanical properties that depend on print direction, visible by the staircasing surface finish effect. Continuous liquid interface production (CLIP) is an alternative approach to AM that capitalizes on the fundamental principle of oxygen-inhibited photopolymerization to generate a continual liquid interface of uncured resin between the growing part and the exposure window. This interface eliminates the necessity of an iterative layer-by-layer process, allowing for continuous production. Herein we report the advantages of continuous production, specifically the fabrication of layerless parts. These advantages enable the fabrication of large overhangs without the use of supports, reduction of the staircasing effect without compromising fabrication time, and isotropic mechanical properties. Combined, these advantages result in multiple indicators of layerless and monolithic fabrication using CLIP technology.

  15. Fabrication of a New Electrostatic Linear Actuator

    Matsunaga, Takashi; Kondoh, Kazuya; Kumagae, Michihiro; Kawata, Hiroaki; Yasuda, Masaaki; Murata, Kenji; Yoshitake, Masaaki

    2000-12-01

    We propose a new electrostatic linear actuator with a large stroke and a new process for fabricating the actuator. A moving slider with many teeth on both sides is suspended above lower electrodes on a substrate by two bearings. A photoresist is used as a sacrificial layer. Both the slider and the bearings are fabricated by Ni electroplating. The bearings are fabricated by the self-alignment technique. Bearings with 0.6 μm clearance can be easily fabricated. All processes are performed at low temperatures up to 110°C. It is confirmed that the slider can be moved mechanically, and also can be moved by about 10 μm when a voltage pulse of 50 V is applied between the slider and the lower electrodes when the slider is upside down. However, the slider cannot move continuously because of friction. We also calculate the electrostatic force acting on one slider tooth. The simulation result shows that the reduction of the electrostatic force to the vertical direction is very important for mechanical movement of the actuator.

  16. Nuclear fuel conversion and fabrication chemistry

    Lerch, R.E.; Norman, R.E.

    1984-01-01

    Following irradiation and reprocessing of nuclear fuel, two operations are performed to prepare the fuel for subsequent reuse as fuel: fuel conversion, and fuel fabrication. These operations complete the classical nuclear fuel cycle. Fuel conversion involves generating a solid form suitable for fabrication into nuclear fuel. For plutonium based fuels, either a pure PuO 2 material or a mixed PuO 2 -UO 2 fuel material is generated. Several methods are available for preparation of the pure PuO 2 including: oxalate or peroxide precipitation; or direct denitration. Once the pure PuO 2 is formed, it is fabricated into fuel by mechanically blending it with ceramic grade UO 2 . The UO 2 can be prepared by several methods which include direct denitration. ADU precipitation, AUC precipitation, and peroxide precipitation. Alternatively, UO 2 -PuO 2 can be generated directly using coprecipitation, direct co-denitration, or gel sphere processes. In coprecipitation, uranium and plutonium are either precipitated as ammonium diuranate and plutonium hydroxide or as a mixture of ammonium uranyl-plutonyl carbonate, filtered and dried. In direct thermal denitration, solutions of uranium and plutonium nitrates are heated causing concentration and, subsequently, direct denitration. In gel sphere conversion, solutions of uranium and plutonium nitrate containing additives are formed into spherical droplets, gelled, washed and dried. Refabrication of these UO 3 -PuO 2 starting materials is accomplished by calcination-reduction to UO 2 -PuO 2 followed by pellet fabrication. (orig.)

  17. Sintering furnace for remote fuel fabrication

    Bowen, W.W.

    1978-10-01

    Component testing and evaluation of a chemical vapor deposition Re/W muffle has been initiated. Hydrogen permeation testing and thermal cycling behavior will be evaluated. Fabrication of prototype 10-12 Kg furnace is scheduled for completion late in 1979, at which time testing of the system will be initiated

  18. Text Fabric: What, How, and Why

    Erwich, C.M.; Kingham, Cody

    Text-Fabric (TF) is a promising new framework for the Eep Talstra Center for Bible and Computer corpus plus (linguistic) annotations. TF is a Python 3.x software package that provides scientific, accessible and reproducible ways of processing Biblical Hebrew text data. It also allows sharing the

  19. Flexible Thermoelectric Generators on Silicon Fabric

    Sevilla, Galo T.

    2012-11-01

    In this work, the development of a Thermoelectric Generator on Flexible Silicon Fabric is explored to extend silicon electronics for flexible platforms. Low cost, easily deployable plastic based flexible electronics are of great interest for smart textile, wearable electronics and many other exciting applications. However, low thermal budget processing and fundamentally limited electron mobility hinders its potential to be competitive with well established and highly developed silicon technology. The use of silicon in flexible electronics involve expensive and abrasive materials and processes. In this work, high performance flexible thermoelectric energy harvesters are demonstrated from low cost bulk silicon (100) wafers. The fabrication of the micro- harvesters was done using existing silicon processes on silicon (100) and then peeled them off from the original substrate leaving it for reuse. Peeled off silicon has 3.6% thickness of bulk silicon reducing the thermal loss significantly and generating nearly 30% more output power than unpeeled harvesters. The demonstrated generic batch processing shows a pragmatic way of peeling off a whole silicon circuitry after conventional fabrication on bulk silicon wafers for extremely deformable high performance integrated electronics. In summary, by using a novel, low cost process, this work has successfully integrated existing and highly developed fabrication techniques to introduce a flexible energy harvester for sustainable applications.

  20. Elastocapillary fabrication of three-dimensional microstructures

    van Honschoten, J.W.; Berenschot, Johan W.; Ondarcuhu, T.; Sanders, Remco G.P.; Sundaram, J.; Elwenspoek, Michael Curt; Tas, Niels Roelof

    2010-01-01

    We describe the fabrication of three-dimensional microstructures by means of capillary forces. Using an origami-like technique, planar silicon nitride structures of various geometries are folded to produce three-dimensional objects of 50–100 m. Capillarity is a particularly effective mechanism since

  1. Fabrication of high efficacy selective solar absorbers

    Tile, N

    2012-03-01

    Full Text Available High efficiency tandem selective solar absorber materials of carbon in nickel oxide (C-NiO) composite were fabricated on an aluminium substrate using a simple and cost effective sol-gel process. The process involved preparation of carbon and nickel...

  2. Review of qualifications for fuel assembly fabrication

    Slabu, Dan; Zemek, Martin; Hellwig, Christian

    2013-01-01

    The required quality of nuclear fuel in industrial production can only be assured by applying processes in fabrication and inspection, which are well mastered and have been proven by an appropriate qualification. The present contribution shows the understanding and experiences of Axpo with respect to qualifications in the frame of nuclear fuel manufacturing and reflects some related expectations of the operator. (orig.)

  3. Internal Backpressure for Terabit Switch Fabrics

    Fagertun, Anna Manolova; Ruepp, Sarah Renée; Rytlig, Andreas

    2012-01-01

    This paper proposes and analyzes the efficiency of novel backpressure schemes for Terabit switch fabrics. The proposed schemes aim at buffer optimization under uniform traffic distribution with Bernoulli packet arrival process. Results show that a reduction of the needed maximum buffer capacity w...... with up to 47% can be achieved with switch-internal backpressure mechanisms at the expense of a small control overhead....

  4. Fuel fabrication and post-irradiation examination

    Venter, P J; Aspeling, J C [Atomic Energy Corporation of South Africa Ltd., Pretoria (South Africa)

    1990-06-01

    This paper provides an overview of the A/c's Bevan and Eldopar facilities for the fabrication of nuclear fuel. It also describes the sophisticated Hot Cell Complex, which is capable of accommodating pressurised water reactor fuel and various other irradiated samples. Some interesting problems and their solutions are discussed. (author)

  5. Fuel fabrication and post-irradiation examination

    Venter, P.J.; Aspeling, J.C.

    1990-01-01

    This paper provides an overview of the A/c's Bevan and Eldopar facilities for the fabrication of nuclear fuel. It also describes the sophisticated Hot Cell Complex, which is capable of accommodating pressurised water reactor fuel and various other irradiated samples. Some interesting problems and their solutions are discussed. (author)

  6. Micro and nano fabrication tools and processes

    Gatzen, Hans H; Leuthold, Jürg

    2015-01-01

    For Microelectromechanical Systems (MEMS) and Nanoelectromechanical Systems (NEMS) production, each product requires a unique process technology. This book provides a comprehensive insight into the tools necessary for fabricating MEMS/NEMS and the process technologies applied. Besides, it describes enabling technologies which are necessary for a successful production, i.e., wafer planarization and bonding, as well as contamination control.

  7. Fabrication of micro metallic valve and pump

    Yang, Ming; Kabasawa, Yasunari; Ito, Kuniyoshi

    2010-03-01

    Fabrication of micro devices by using micro metal forming was proposed by the authors. We developed a desktop servo-press machine with precise tooling system. Precise press forming processes including micro forging and micro joining has been carried out in a progressive die. In this study, micro metallic valve and pump were fabricated by using the precise press forming. The components are made of sheet metals, and assembled in to a unit in the progressive die. A micro check-valve with a diameter of 3mm and a length of 3.2mm was fabricated, and the property of flow resistance was evaluated. The results show that the check valve has high property of leakage proof. Since the valve is a unit parts with dimensions of several millimeters, it has advantage to be adapted to various pump design. Here, two kinds of micro pumps with the check-valves were fabricated. One is diaphragm pump actuated by vibration of the diaphragm, and another is tube-shaped pump actuated by resonation. The flow quantities of the pumps were evaluated and the results show that both of the pumps have high pumping performance.

  8. Numerical Tools for Composite Woven Fabric Preforming

    Abel Cherouat

    2013-01-01

    Full Text Available An important step in the manufacturing processes of thin composite components is the layingup of the reinforcement onto the mould surface. The prediction of the angular distortion of the reinforcement during draping and the changes in fibre orientation are essential for the understanding of the manufacture process and the evaluation of the mechanical properties of the composite structures. This paper presents an optimization-based method for the simulation of the forming processes of woven fabric reinforced composites. Two different approaches are proposed for the simulation of the draping of woven fabric onto complex geometries: geometrical and mechanical approaches. The geometrical approach is based on a fishnet model. It is well adapted to predimensioning fabrics and to give a suitable quantification of the resulting flat patterns. The mechanical approach is based on a mesostructural model. It allows us to take into account the mechanical properties of fibres and resin and the various dominating mode of deformation of woven fabrics during the forming process. Some numerical simulations of the forming process are proposed and compared with the experimental results in order to demonstrate the efficiency of our approaches.

  9. Dissolvable microneedle fabrication using piezoelectric dispensing technology.

    Allen, Evin A; O'Mahony, Conor; Cronin, Michael; O'Mahony, Thomas; Moore, Anne C; Crean, Abina M

    2016-03-16

    Dissolvable microneedle (DMN) patches are novel dosage forms for the percutaneous delivery of vaccines. DMN are routinely fabricated by dispensing liquid formulations into microneedle-shaped moulds. The liquid formulation within the mould is then dried to create dissolvable vaccine-loaded microneedles. The precision of the dispensing process is critical to the control of formulation volume loaded into each dissolvable microneedle structure. The dispensing process employed must maintain vaccine integrity. Wetting of mould surfaces by the dispensed formulation is also an important consideration for the fabrication of sharp-tipped DMN. Sharp-tipped DMN are essential for ease of percutaneous administration. In this paper, we demonstrate the ability of a piezoelectric dispensing system to dispense picolitre formulation volumes into PDMS moulds enabling the fabrication of bilayer DMN. The influence of formulation components (trehalose and polyvinyl alcohol (PVA) content) and piezoelectric actuation parameters (voltage, frequency and back pressure) on drop formation is described. The biological integrity of a seasonal influenza vaccine following dispensing was investigated and maintained voltage settings of 30 V but undermined at higher settings, 50 and 80 V. The results demonstrate the capability of piezoelectric dispensing technology to precisely fabricate bilayer DMN. They also highlight the importance of identifying formulation and actuation parameters to ensure controlled droplet formulation and vaccine stabilisation. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Sandia National Laboratories: Fabrication, Testing and Validation

    digital and analog elements. * Cadence Process-Design Kit. Structured ASIC Sandia National Laboratories demonstrate complex multilevel devices such as micro-mass-analysis systems up to 25 microns thick and novel possible to fabricate a wide very large variety of useful devices. Micro-Mass-Analysis Systems Applications

  11. FABRICATION AND CHARACTERIZATION OF FAST IGNITION TARGETS

    HILL, D.W; CASTILLO, E; CHEN, K.C; GRANT, S.E; GREENWOOD, A.L; KAAE, J.L; NIKROO, A; PAGUIO, S.P; SHEARER, C; SMITH, J.N Jr.; STEPHENS, R.B; STEINMAN, D.A; WALL, J.

    2003-09-01

    OAK-B135 Fast ignition is a novel scheme for achieving laser fusion. A class of these targets involves cone mounted CH shells. The authors have been fabricating such targets with shells with a wide variety of diameters and wall thicknesses for several years at General Atomics. In addition, recently such shells were needed for implosion experiments at Laboratory for Laser Energetics (LLE) that for the first time were required to be gas retentive. Fabrication of these targets requires producing appropriate cones and shells, assembling the targets, and characterization of the assembled targets. The cones are produced using micromachining and plating techniques. The shells are fabricated using the depolymerizable mandrel technique followed by micromachining a hole for the cone. The cone and the shell then need to be assembled properly for gas retention and precisely in order to position the cone tip at the desired position within the shell. Both are critical for the fast ignition experiments. The presence of the cone in the shell creates new challenges in characterization of the assembled targets. Finally, for targets requiring a gas fill, the cone-shell assembly needs to be tested for gas retention and proper strength at the glue joint. This paper presents an overview of the developmental efforts and technical issues addressed during the fabrication of fast ignition targets

  12. Porous Microfluidic Devices - Fabrication adn Applications

    de Jong, J.; Geerken, M.J.; Lammertink, Rob G.H.; Wessling, Matthias

    2007-01-01

    The major part of microfluidic devices nowadays consists of a dense material that defines the fluidic structure. A generic fabrication method enabling the production of completely porous micro devices with user-defined channel networks is developed. The channel walls can be used as a (selective)

  13. Technological aspects of gaseous pixel detectors fabrication

    Blanco Carballo, V.M.; Salm, Cora; Smits, Sander M.; Schmitz, Jurriaan; Melai, J.; Chefdeville, M.A.; van der Graaf, H.

    2007-01-01

    Integrated gaseous pixel detectors consisting of a metal punctured foil suspended in the order of 50μm over a pixel readout chip by means by SU-8 insulating pillars have been fabricated. SU-8 is used as sacrificial layer but metallization over uncrosslinked SU-8 presents adhesion and stress

  14. Estudios de economía y cooperación social. Un estudio experimental con estudiantes universitarios en Chile

    Javier Núñez

    2009-01-01

    Full Text Available Este artículo aporta nuevas pruebas experimentales del efecto de estudiar economía en dos dimensiones de la cooperación social: la confianza y la reciprocidad. Estas dimensiones son aproximadas por medio del conocido juego de confianza. Empleando técnicas de muestreo e igualación (matching, y un reclutamiento de sujetos por invitación selectiva en vez de convocatoria abierta, el trabajo permite separar el efecto asociado al estudio de la economía del efecto asociado al potencial sesgo de selección en las preferencias de quienes escogen estudiar economía. La muestra está compuesta por estudiantes universitarios de economía y de otras carreras con escaso o nulo contenido de economía en Chile. Los resultados muestran que los montos enviados por los estudiantes de economía en la primera etapa del juego de confianza son significativamente menores en comparación con los estudiantes de otras carreras, lo que indica una menor propensión de los primeros a confiar en los demás. A su vez, encontramos una menor inclinación de los economistas a devolver los montos prometidos, lo que muestra una menor tendencia a la reciprocidad de la confianza depositada en ellos en el juego de confianza.

  15. Los estudios de fecundidad en poblaciones contemporáneas como referentes directos para los estudios paleodemográficos

    Patricia Olga Hernández Espinoza

    2014-01-01

    Full Text Available Las limitantes del trabajo paleodemográfico, como la obtención de datos sobre la fecundidad de las sociedades antiguas, han impulsado el desarrollo de estrategias metodológicas para obtener esta información con algún grado de certeza. En este estudio contrastamos dos tipos de metodologías para obtener datos sobre fecundidad: la paleodemográfica basada en el análisis bioarqueológico de una serie esquelética maya prehispánica, utilizando el modelo de Weiss, y la metodología demográfica moderna aplicada a datos censales de Quintana Roo, con los que se calcularon varios indicadores de fecundidad. Los resultados muestran que el método estadístico que hemos aplicado en nuestras investigaciones permite tener un acercamiento confiable a los niveles de fecundidad y mortalidad que pudieron haber tenido estos grupos en el pasado, pues las estimaciones paleodemográficas presentan valores consistentes con la información obtenida de los censos, con un cálculo de cuatro a seis hijos para el grupo maya prehispánico de Chac Mool.

  16. Improved Sound Absorption Performance of Nonwoven Fabric using Fabric Facing and Air Back Cavity

    Ismail Ahmad Yusuf

    2017-01-01

    Full Text Available This paper presents the improvement methods to increase sound absorption performance of polyethylene based nonwoven fabric (PNF. The methods are placing a woven fabric in front of the sample as well as providing air cavity behind the sample. The samples were experimentally tested in an impedance tube based on ISO 10354-2:2001 whereby two microphones are used and the transfer matrix methods are employed. From the results, it can be seen that placing front woven fabric effectively increases sound absorption performance. Moreover, introducing air cavity gap behind the sample is also found to be more significant to increase sound absorption.

  17. Fuel Fabrication Capability Research and Development Plan

    Senor, David J.; Burkes, Douglas

    2014-04-17

    The purpose of this document is to provide a comprehensive review of the mission of the Fuel Fabrication Capability (FFC) within the Global Threat Reduction Initiative Convert Program, along with research and development (R&D) needs that have been identified as necessary to ensuring mission success. The design and fabrication of successful nuclear fuels must be closely linked endeavors. Therefore, the overriding motivation behind the FFC R&D program described in this plan is to foster closer integration between fuel design and fabrication to reduce programmatic risk. These motivating factors are all interrelated, and progress addressing one will aid understanding of the others. The FFC R&D needs fall into two principal categories, 1) baseline process optimization, to refine the existing fabrication technologies, and 2) manufacturing process alternatives, to evaluate new fabrication technologies that could provide improvements in quality, repeatability, material utilization, or cost. The FFC R&D Plan examines efforts currently under way in regard to coupon, foil, plate, and fuel element manufacturing, and provides recommendations for a number of R&D topics that are of high priority but not currently funded (i.e., knowledge gaps). The plan ties all FFC R&D efforts into a unified vision that supports the overall Convert Program schedule in general, and the fabrication schedule leading up to the MP-1 and FSP-1 irradiation experiments specifically. The fabrication technology decision gates and down-selection logic and schedules are tied to the schedule for fabricating the MP-1 fuel plates, which will provide the necessary data to make a final fuel fabrication process down-selection. Because of the short turnaround between MP-1 and the follow-on FSP-1 and MP-2 experiments, the suite of specimen types that will be available for MP-1 will be the same as those available for FSP-1 and MP-2. Therefore, the only opportunity to explore parameter space and alternative processing

  18. Estudio neuroepidemiológico nacional (EPINEURO colombiano

    Gustavo Pradilla A.

    2003-08-01

    Full Text Available OBJETIVO: Determinar la prevalencia de ocho problemas neurológicos -migraña, enfermedad cerebrovascular, enfermedad de Parkinson, neuropatía periférica, trastornos del desarrollo neurológico, epilepsia, demencia y secuelas de traumatismo craneoencefálico- en Colombia como parte del estudio neuroepidemiológico nacional (EPINEURO. MÉTODOS: Se realizó una encuesta transversal en dos fases entre septiembre de 1995 y agosto de 1996. En la primera fase se identificó a las personas que podían estar padeciendo alguna enfermedad neurológica y en la segunda se hizo el diagnóstico específico. Se examinó una muestra de 8 910 personas distribuidas en proporción con la población de cada una de las cinco zonas geográficas de Colombia, que son las regiones central, sudoccidental, noroccidental, oriental y la costa caribe. La evaluación se realizó según una versión modificada del protocolo de neuroepidemiología de la Organización Mundial de la Salud, además de un examen físico simplificado. A los posibles pacientes de demencia identificados se les aplicó un examen neuropsicológico, diseñado para este estudio, con el fin de profundizar en los aspectos cognoscitivos. Se aplicaron las escalas de Hachinski, Yesavage y Blessed y los criterios diagnósticos del NINCDS-ADRDA para la enfermedad de Alzheimer, los del NINDS-AIREN para la demencia de origen vascular y los del DSM-IV para todo tipo de demencia. Se realizó una encuesta para determinar si había secuelas de traumatismo craneoencefálico. Las personas mayores de 12 años fueron evaluadas por neurólogos de adultos y los menores de 12 años por un neuropediatra. Se calcularon las prevalencias de trastornos neurológicos por edad y sexo, tanto por región como para el país en su totalidad, y sus intervalos de confianza de 95%. RESULTADOS: La prevalencia por 1 000 habitantes de los trastornos investigados fueron las siguientes: migraña, 71,2 (intervalo de confianza de 95% [IC95

  19. Estudio comparativo entre bibliotecas universitarias latinoamericanas y estadounidenses

    Arenas Franco, María Luisa

    2002-06-01

    Full Text Available The paper presents the first results of a comparative study done by the Library System (SIBUC and the Industrial and System Engineering Department of the Pontificia Universidad Católica de Chile. The objective of the study is the development of indicators for University Libraries to compare themselves and to identify their relative position in relation to other peer or leader institutions at the national, regional and international level. With the collaboration of four Chilean and two Latin-American prestigious Universities data weal obtained. In adition, information regarding ten American Universities was obtained from the online version of US News. Nineteen indicators for the following three main areas: budget, relationship between resources/Faculty and Studens, and Efficiency on the use of resources were developed so that the institutions, for bench-marking purpose, are able to evaluate their own strategic position and to improve their weaknesses and maintain their strengths. Finally, benefits that can be obtained from the use of the nineteen indicators are stated for SIBUC, as well as for other Latin-American University Libraries.

    Se presentan los primeros resultrados de un estudio comparativo (benchmarking iniciado por el Sistema de Bibliotecas de la Pontificia Universidad Católica de Chile (SIBUC en conjunto con el Departamento de Ingeniería Industrial y de Sistemas de esta misma universidad. Su objetivo es el establecimiento de índices para bibliotecas universitarias, que les permitan a través del tiempo compararse e identificar su posición relativa respecto a otras instituciones pares o líderes en el ámbito nacional, latinoamericano e internacional. para ello, se contó con la colaboración en Chile de cuatro de sus principales universidades, en Latinoamérica de dos universidades de prestigio, y de estados Unidos se obtuvo a través de internet de diez universidades incluidas en ranking por la US News. El estudio arroj

  20. Estudio del modelo de desgaste propuesto por Archard

    FABIO ALEXANDER SUÁREZ BUSTAMANTE

    2005-01-01

    Full Text Available El comportamiento de componentes de máquinas y de materiales necesita ser optimizado para reducir los costos de operación en las plantas industriales. Este hecho ha impulsado la Tribología, un área relacionada con el estudio de la fricción, la lubricación y el desgaste. Uno de los principales objetivos de esta área del conocimiento es elaborar modelos matemáticos para expresar la variación del desgaste durante el contacto de superficies en movimiento, con el fin de predecir la vida útil de los elementos de máquinas. El modelo de Archard para desgaste por deslizamiento en seco, formulado en 1953, es un modelo clásico que plantea una variación del desgaste inversamente proporcional a la dureza del material y directamente proporcional a la carga aplicada. En el presente trabajo, se ha utilizado el método de modelamiento de problemas físicos, propuesto por Asbhy, para analizar los modelos propuestos por Archard (Modelo de contactos múltiples en superficies rugosas y modelo de desgaste mecánico. Con base en él se ha podido realizar un análisis profundo a dichos modelos, mostrando un panorama más amplio del modelo de Archard; se discuten aspectos no mostrados en los textos y artículos de tribología, donde el tratamiento dado a este modelo resulta ser superficial, desconociendo las limitaciones y la perspectiva que tuvo Archard sobre los aspectos que deberían considerarse en un modelo de desgaste.

  1. Estudio taxonómico del genero Byttneria Loefling (Sterculiaceae

    Carmen Lelia Cristóbal

    1976-01-01

    Full Text Available Byttneria es el único género de la tríbu Byttnerieae representado en América' cuyo estudio taxonómico no había sido encarado en su totalidad. Las contribuciones más importantes son las que' se hicieron en floras, como la de K. Schumann (1886, para Brasil b la de Arenes (1959, para Madagascar. Aunque se trata de importantes trabajos, la limitación de los mismos, impidió valorizar en su medida los cáracteres morfológicos que definen las secciones de este género. Es así COmo ahora'al comparar morfólógicamente las 131 especies que lo componen, se propone la división del género en 6 secciones, de las cuales 4 s?n descriptas por pnmera vez.En este trabajo el tratamiento a nivel de especie no es uniforme. He revisado críticamente, en primer término, las 79 especies americanas, de las cuales 27 resultaron nuevas para la ciencia. Con respecto a las 52 restantes que son extraamericanas estudié la mayor parte de los tipos y procedí de la siguiente manera. Acepto las 27 especies delimitadas por Arenes endémicas de Mada:gascar, e incluyo una lista de las mismas. Enumero las 6 especies de Africa continental, de las cuales una vive también en América. Analizo y redescribó B. herbacea, endemismo de la India, que constituye por sí sola la sección Gerontogaea. Finalmente, enumero bajo la sección Vahihara las 19 especies asiáticas restantes, propias de Indochina e Indonesia, con algunas notas críticas.

  2. Estudio Preliminar del Género Hevea en Colombia

    Evans Schultes Richard

    1946-04-01

    Full Text Available Aunque en el territorio colombiano se han venido explotando los árboles caucheros del género Hevea durante casi medio siglo, solo ha sido en los últimos años cuando los botánicos han podido estudiar científicamente las especies en este país. En el presente artículo me limito a exponer de manera suscinta la identificación específica y la distribución geográfica del género Hevea en Colombia, valiéndome de las identificaciones botánicas preliminares que se han hecho hasta ahora, así como de los datos que he recogido personalmente y las informaciones que me han sido suministradas en fuentes fidedignas. Es de lamentarse la falta de exploración botánica en la hoya del río Inírida y sus afluentes que por ser, junto con el Guaviare, la región situada más al noreste de la zona de extensión del género Hevea, deja una laguna en los conocimientos que actualmente poseemos sobre la distribución geográfica de este género botánico. Igualmente carecemos de datos botánicos respecto de los ríos de menor importancia tales como el Yarí, el Cahuinarí y el Cotuhé, aunque sí los tenemos de las regiones mencionadas, lo mismo de otras vastas extensiones de la Amazonía Colombiana, podremos completar a satisfacción el estudio cuyo esbozo provisional presento en este trabajo.

  3. Estudio de la anurofauna del municipio de Ibagué

    M. H. Bernal

    2000-07-01

    Full Text Available Colombia es considerada, en el mundo, el país más rico en especies de anfibios (Lynch, 1998. De las 4.300 especies registradas en el planeta, Colombia presenta 583 (Ruiz et al., 1996. Esto refleja la gran riqueza que el país tiene respecto a la diversidad  no sólo de anfibios, sino también de otros grupos de animales y plantas. Entre los anfibios el mayor número de especies se encuentra en el orden Anura, los comúnmente conocidos como ranas y sapos, le sigue el orden Urodela (salamandras y por ultimo esta el Apoda (cecilias. En Colombia se han reportado 540 especies de anuros, pertenecientes a 56 géneros y 9 familias (Ruiz et 01., 1996. Por otra parte, entre las regiones de Colombia con mayor aporte a la diversidad de anuros esta la Cordillera Central. Estimulados por esta riqueza de anuros y dada las amplias zonas del país aún desconocidas a nivel de inventarios, entre ellas el municipio de Ibagué, el cual por su posición geográfica en la Cordillera Central y por su variedad de niveles altitudinales, ecosistemas y el hábitat para el albergue de los anuros, se llevó a cabo el presente estudio, con el propósito de reconocer el aporte de este municipio a la diversidad descrita con respecto a la Cordillera Central ya Colombia.

  4. Estudio descriptivo de algunas variables emocionales en las personas mayores

    Igone Etxeberria

    2016-08-01

    Full Text Available Se analizó el funcionamiento emocional (afecto positivo y negativo, satisfacción con la vida, soledad y estrategias de regulación de las personas centenarias en comparación con el de personas de menor edad (65-74, 75-84 y 85-94 años. Participaron en el estudio 257 personas mayores sin deterioro cognitivo y sin dependencia para las Actividades de la Vida Diaria (AVD. Los resultados revelaron que, en las personas centenarias, se producía una disminución de la afectividad positiva en comparación con los grupos de 65 a 74 años y de 75 a 84 años, pero no así con el de 85 a 94 años. Además, presentaban menor afecto negativo y más satisfacción con la vida (en comparación con el grupo de 65 a 74 años, al tiempo que manifestaban sentirse más solas (en comparación con los grupos de 65 a 74 años y de 75 a 84 años. Con respecto a las estrategias de regulación, en general, las personas centenarias utilizan en menor medida las estrategias proactivas y la solución de problemas y en mayor medida las pasivas, al menos en la regulación de la tristeza. En conclusión, a pesar de experimentar menos afecto positivo y más soledad se produce cierta disminución en el afecto negativo, e incluso cierto aumento de la satisfacción con la vida. En lo que respecta a la regulación emocional, las personas centenarias utilizan menos las estrategias proactivas y más las pasivas (tristeza.

  5. El cuerpo, en el campo de estudio de la fisioterapia

    Adriana Prieto Rodríguez

    2005-04-01

    Full Text Available Objetivo: describir el concepto de cuerpo como parte de la investigación sobre la categoría disponibilidad corporal y su explicación para la fisioterapia. Material y métodos: investigación teórica, en la cual se aplicó el método fenomenológico para la definición de las categorías emergentes, se desarrollaron las fases de documentación, procesamiento analítico de los documentos e interpretación y construcción de subcategorías. Se empleó la técnica de análisis documental a una muestra de 59 documentos de 82 reunidos. Como criterio de validez interna para el proceso de interpretación se efectuó lectura de los documentos por parte de cada una de las investigadoras y posterior contrastación. Resultados: se identificaron dos enfoques interpretativos, el monismo y el dualismo, que generan relaciones centradas en la condición material o espiritual del cuerpo. Desde el dualismo, el estudio del cuerpo en la profesión se dirige a su capacidad funcional y adaptación orgánica; desde el monismo, la fisioterapia reconoce al cuerpo con respecto a su condición de lenguaje, de interacción social y de conciencia. Conclusiones: se reconoce el cuerpo como un lenguaje humano con implicaciones teóricas y metodológicas para la profesión. Ello exige integrar los aspectos orgánicos, simbólicos y psíquicos del cuerpo, en los procesos de formación de pregrado y avanzada.

  6. ANÁLISIS DEL CONTRATO DE LECTURA DE DOS PUBLICACIONES PERIÓDICAS DE CIENCIAS SOCIALES DE ARGENTINA: ESTUDIOS. REVISTA DEL CENTRO DE ESTUDIOS AVANZADOS (UNC Y ESTUDIOS SOCIALES (UNL

    Florencia María Páez

    2012-01-01

    Full Text Available Pretendemos con este trabajo efectuar un análisis del contrato de lectura de dos publicaciones periódicas de Argentina que se inscriben en el campo de estudios de las ciencias sociales. Partimos de las ideas de Eliseo Verón, esbozadas en “Cuando leer es hacer: la enunciación en el discurso de la prensa gráfica” (1984, y realizamos una apropiación de las categorías del autor teniendo en cuenta las particularidades propias de las revistas científicas y el modo de funcionamiento del subcampo de publicaciones de ciencias sociales del país, en íntima relación con los capitales en juego en el campo científico en general. Hemos escogido uno de los últimos números de cada una de las revistas Estudios del Centro de Estudios Avanzados de la UNC, y Estudios Sociales, de la Universidad Nacional del Litoral. Los criterios que fueron atendidos al momento de la elección de estas revistas apuntaron a la factibilidad de efectuar una comparación entre los contratos de lectura de ambas, según la propuesta de Verón en torno a este tipo de análisis. Este estudio nos permite profundizar nuestra comprensión del funcionamiento de la comunicación científica gráfica, puntualmente posibilita conocer las estrategias que las publicaciones despliegan para captar a los académicos (potenciales lectores y autores en las revistas y para convencer de la calidad científica de su trabajo editorial a los encargados de elaborar índices y catálogos de publicación.

  7. A biomimic thermal fabric with high moisture permeability

    Fan Jie

    2013-01-01

    Full Text Available Moisture comfort is an essential factor for functional property of thermal cloth, especially for thick thermal cloth, since thick cloth may hinder effective moisture permeation, and high moisture concentration in the micro-climate between skin and fabric would cause cold feeling. Here, we report a biomimic thermal fabric with excellent warm retention and moisture management properties. In this fabric, the warp yarn system constructs many tree-shaped channel nets in the thickness direction of the fabric. Experimental result indicates that the special hierarchic configuration of warp yarns endows the biomimic thermal fabric with a better warm retention and water vapor management properties compared with the traditional fabrics.

  8. ESTUDIO DEL EFECTO DE LA CRANEOACUPUNTURA EN PACIENTES CON ENFERMEDAD VASCULAR CEREBRAL. (EVC)

    PEREZ BRAVO, MIGUEL

    2009-01-01

    LA ENFERMEDAD VASCULAR CEREBRAL (EVC) EN MEXICO ES UN IMPORTANTE PROBLEMA DE SALUD PUBLICA, ES LA TERCERA CAUSA DE MUERTE Y LA SEGUNDA EN PRODUCIR INCAPACIDAD NEUROLOGICA. EL OBJETIVO DE ESTE ESTUDIO FUE EVALUAR EL EFECTO DE LA CRANEOACUPUNTURA EN PACIENTES CON ENFERMEDAD VASCULAR CEREBRAL (ZHONG FENG). EL PRESENTE ES UN ESTUDIO EXPERIMENTAL, PROSPECTIVO Y LONGITUDINAL, REALIZADO EN EL HOSPITAL DEL ISSSTE DE LA CIUDAD DE PUEBLA, A UN GRUPO DE 11 PACIENTES DE AMBOS SEXOS, CON...

  9. Situación de los Estudios Clínicos en Colombia

    Alexander Carreño Dueñas

    2013-06-01

    Full Text Available Antecedentes: Los estudios clínicos son un tipo de investigación que ayudan a la ciencia médica a encontrar nuevas formas de prevenir, detectar, diagnosticar o tratar enfermedades y hoy en día son los estudios que aportan la mayor evidencia científica frente al uso de nuevas terapias farmacológicas. Objetivo: Describir la situación actual de los estudios clínicos en Colombia. Métodos: Se consultaron las bases de datos de registro de estudios clínicos, se realizó una revisión de los aspectos regulatorios y la normatividad relacionada. Resultados: no es posible determinar la cantidad exacta de estudios clínicos registrados en Colombia debido a que no se cuenta con un sistema de registro. Los estudios clínicos registrados difieren en las bases de datos consultadas. Desde 1995 a 2013 se identificaron 738 ensayos únicos, el 90% de ellos fueron patrocinados por industrias farmacéuticas, 62% fueron fase III y se han desarrollado principalmente en enfermedades crónicas como el cáncer, las enfermedades cardiovasculares y las degenerativas. Conclusiones: Colombia carece de un sistema de registro de estudios clínicos que permita realizar un seguimiento adecuado por parte de la comunidad y los profesionales de la salud. Debido a que el mayor porcentaje de estos estudios han sido patrocinados por la Industria Farmacéutica, se hace necesario fomentar y desarrollar estrategias que permitan el desarrollo de investigación propia

  10. Estudio de las propiedades mecánicas del sistema óseo

    Alvaro Mendoza G.

    1991-03-01

    Full Text Available Los estudios adelantados fueron realizados para el área de Biomecánica, tratando de que su desarrollo fuera lo más científico posible; y aplicado al estudio del sistema óseo del hombre, ya que él posee un material que tiene un comportamiento que hace posible las aplicaciones de conceptos mecánicos y físicos de la Ingenlerla para su análisis.

  11. Estudio de las propiedades mecánicas del sistema óseo

    Alvaro Mendoza G.

    2011-01-01

    Los estudios adelantados fueron realizados para el área de Biomecánica, tratando de que su desarrollo fuera lo más científico posible; y aplicado al estudio del sistema óseo del hombre, ya que él posee un material que tiene un comportamiento que hace posible las aplicaciones de conceptos mecánicos y físicos de la Ingenlerla para su análisis.

  12. Solid freeform fabrication of biological materials

    Wang, Jiwen

    This thesis investigates solid freeform fabrication of biological materials for dental restoration and orthopedic implant applications. The basic approach in this study for solid freeform fabrication of biological materials is micro-extrusion of single or multiple slurries for 3D components and inkjet color printing of multiple suspensions for functionally graded materials (FGMs). Common issues associated with micro-extrusion and inkjet color printing are investigated. These common issues include (i) formulation of stable slurries with a pseudoplastic property, (ii) cross-sectional geometry of the extrudate as a function of the extrusion parameters, (iii) fabrication path optimization for extrusion process, (iv) extrusion optimization for multi-layer components, (v) composition control in functionally graded materials, and (vi) sintering optimization to convert the freeform fabricated powder compact to a dense body for biological applications. The present study clearly shows that the rheological and extrusion behavior of dental porcelain slurries depend strongly on the pH value of the slurry and extrusion conditions. A slurry with pseudoplastic properties is a basic requirement for obtaining extruded lines with rectangular cross-sections. The cross-sectional geometry of the extrudate is also strongly affected by extrusion parameters including the extrusion nozzle height, nozzle moving speed, extrusion rate, and critical nozzle height. Proper combinations of these extrusion parameters are necessary in order to obtain single line extrudates with near rectangular cross-sections and 3D objects with dimensional accuracy, uniform wall thickness, good wall uprightness, and no wall slumping. Based on these understandings, single-wall, multi-wall, and solid teeth have been fabricated via micro-extrusion of the dental slurry directly from a CAD digital model in 30 min. Inkjet color printing using stable Al2O3 and ZrO 2 aqueous suspensions has been developed to fabricate

  13. FabricS: A user-friendly, complete and robust software for particle shape-fabric analysis

    Moreno Chávez, G.; Castillo Rivera, F.; Sarocchi, D.; Borselli, L.; Rodríguez-Sedano, L. A.

    2018-06-01

    Shape-fabric is a textural parameter related to the spatial arrangement of elongated particles in geological samples. Its usefulness spans a range from sedimentary petrology to igneous and metamorphic petrology. Independently of the process being studied, when a material flows, the elongated particles are oriented with the major axis in the direction of flow. In sedimentary petrology this information has been used for studies of paleo-flow direction of turbidites, the origin of quartz sediments, and locating ignimbrite vents, among others. In addition to flow direction and its polarity, the method enables flow rheology to be inferred. The use of shape-fabric has been limited due to the difficulties of automatically measuring particles and analyzing them with reliable circular statistics programs. This has dampened interest in the method for a long time. Shape-fabric measurement has increased in popularity since the 1980s thanks to the development of new image analysis techniques and circular statistics software. However, the programs currently available are unreliable, old and are incompatible with newer operating systems, or require programming skills. The goal of our work is to develop a user-friendly program, in the MATLAB environment, with a graphical user interface, that can process images and includes editing functions, and thresholds (elongation and size) for selecting a particle population and analyzing it with reliable circular statistics algorithms. Moreover, the method also has to produce rose diagrams, orientation vectors, and a complete series of statistical parameters. All these requirements are met by our new software. In this paper, we briefly explain the methodology from collection of oriented samples in the field to the minimum number of particles needed to obtain reliable fabric data. We obtained the data using specific statistical tests and taking into account the degree of iso-orientation of the samples and the required degree of reliability

  14. Evaluation of Whiteness in Linen and Semi-linen Fabrics

    Liucina Kot

    2015-03-01

    Full Text Available Whiteness of textiles is one of the main "white" product quality indicators described by the following parameters: lightness of a colour, colour tone (white shade, white uniformity and stability under the influence of physical factors. “White” textile products can be perceived by comparing them with a white standard (Pantone colour palette. On the other hand, the whiteness of the fabric can be estimated using the colorimeter and determining lightness of a fabric L. The purpose of a research is to assess the whiteness of a linen and semi-linen fabric using two different methods, to carry out a comparative analysis of the results and to associate fabric whiteness with the fabric structure parameters. Two methods were used for experiment (colorimeter Spectraflash SF450X and expert assessment of whiteness. The analysed colours of a fabric were divided into five colours: white, whitish, light grey, grey and dark grey. The examination of the two methods, different results were obtained: testing with colorimeter, white colour was found in only one fabric, while the experts found the fabrics of white colour much more. The opinions of experts vary also. Fabric lightness L was associated with fabric structure parameters – the warp and weft settings and fabric weave. It was found that these fabric structure parameters affect the lightness of a colour of a fabric L very little.DOI: http://dx.doi.org/10.5755/j01.ms.21.1.5348

  15. International light water nuclear fuel fabrication supply. Are fabrication services assured?

    Rothwell, Geoffrey

    2010-01-01

    This paper examines the cost structure of fabricating light water reactor (LWR) fuel with low-enriched uranium (LEU, with less than 5% enrichment). The LWR-LEU fuel industry is decades old, and (except for the high entry cost of designing and licensing a fuel fabrication facility and its fuel), labor and additional fabrication lines can be added at Nth-of-a-Kind cost to the maximum capacity allowed by a site license. The industry appears to be competitive: nuclear fuel fabrication capacity is assured with many competitors and reasonable prices. However, nuclear fuel assurance has become an important issue for nations now to considering new nuclear power plants. To provide this assurance many proposals equate 'nuclear fuel banks' (which would require fuel for specific reactors) with 'LEU banks' (where LEU could be blended into nuclear fuel with the proper enrichment) with local fuel fabrication. The policy issues (which are presented, but not answered in this paper) become (1) whether the construction of new nuclear fuel fabrication facilities in new nuclear power nations could lead to the proliferation of nuclear weapons, and (2) whether nuclear fuel quality can be guaranteed under current industry arrangements, given that fuel failure at one reactor can lead to forced shutdowns at many others. (author)

  16. Project Plan Remote Target Fabrication Refurbishment Project

    Bell, Gary L.; Taylor, Robin D.

    2009-01-01

    In early FY2009, the DOE Office of Science - Nuclear Physics Program reinstated a program for continued production of 252 Cf and other transcurium isotopes at the Radiochemical Engineering Development Center (REDC) at Oak Ridge National Laboratory (ORNL). The FY2009 major elements of the workscope are as follows: (1) Recovery and processing of seven transuranium element targets undergoing irradiation at the High Flux Isotope Reactor (HFIR) at ORNL; (2) Development of a plan to manufacture new targets for irradiation beginning in early- to mid-FY10 to supply irradiated targets for processing Campaign 75 (TRU75); and (3) Refurbishment of the target manufacturing equipment to allow new target manufacture in early FY10 The 252 Cf product from processing Campaign 74 (recently processed and currently shipping to customers) is expected to supply the domestic demands for a period of approximately two years. Therefore it is essential that new targets be introduced for irradiation by the second quarter of FY10 (HFIR cycle 427) to maintain supply of 252 Cf; the average irradiation period is ∼10 HFIR cycles, requiring about 1.5 calendar years. The strategy for continued production of 252 Cf depends upon repairing and refurbishing the existing pellet and target fabrication equipment for one additional target production campaign. This equipment dates from the mid-1960s to the late 1980s, and during the last target fabrication campaign in 2005- 2006, a number of component failures and operations difficulties were encountered. It is expected that following the target fabrication and acceptance testing of the targets that will supply material for processing Campaign 75 a comprehensive upgrade and replacement of the remote hot-cell equipment will be required prior to subsequent campaigns. Such a major refit could start in early FY 2011 and would take about 2 years to complete. Scope and cost estimates for the repairs described herein were developed, and authorization for the work

  17. ESTUDIO MULTICÉNTRICO LONGITUDINAL DE DEPLECIÓN DE LINFOCITOS B EN LUPUS ERITEMATOSO SISTÉMICO REFRACTARIO: ESTUDIO LESIMAB

    Nieves-Martín, Laura

    2014-01-01

    Cohorte multicéntrica retrospectiva de pacientes con LES refractario a terapia estándar que fueron tratados con rituximab. Estudio de efectividad y seguridad tras uno o varios cursos de tratamiento. Así mismo análisis lipídico básico de los pacientes antes y después del tratamiento.

  18. Superparamagnetic photocurable nanocomposite for the fabrication of microcantilevers

    Suter, M; Ergeneman, O; Zürcher, J

    2011-01-01

    We present a photocurable polymer composite with superparamagnetic characteristics for the fabrication of microcantilevers. Uniform distribution and low particle agglomeration (......We present a photocurable polymer composite with superparamagnetic characteristics for the fabrication of microcantilevers. Uniform distribution and low particle agglomeration (...

  19. Graphene based integrated tandem supercapacitors fabricated directly on separators

    Chen, Wei; Xia, Chuan; Alshareef, Husam N.

    2015-01-01

    It is of great importance to fabricate integrated supercapacitors with extended operation voltages as high energy density storage devices. In this work, we develop a novel direct electrode deposition on separator (DEDS) process to fabricate graphene

  20. Adaptive Control of Freeze-Form Extrusion Fabrication Processes (Preprint)

    Zhao, Xiyue; Landers, Robert G; Leu, Ming C

    2008-01-01

    Freeze-form Extrusion Fabrication (FEF) is an additive manufacturing process that extrudes high solids loading aqueous ceramic pastes in a layer-by-layer fashion below the paste freezing temperature for component fabrication...

  1. Controlled Fabrication of Metallic Electrodes with Atomic Separation

    Morpurgo, A.; Robinson, D.; M. Marcus, C.

    1998-01-01

    We report a new technique for fabricating metallic electrodes on insulating substrates with separations on the 1 nm scale. The fabrication technique, which combines lithographic and electrochemical methods, provides atomic resolution without requiring sophisticated instrumentation. The process is...

  2. Tensile properties of polymethyl methacrylate coated natural fabric Sterculia urens

    Jayaramudu, J

    2009-04-01

    Full Text Available stress, Young's modulus and % elongation at break were determined using a Universal Testing Machine. The effect of alkali treatment and the polymethyl methacrylate coating on tensile properties of the fabric was studied. The morphology of the fabric...

  3. Fabrication and characterization of absorber pellets for FFTF irradiation testing

    Wilson, C.N.; Hollenberg, G.W.

    1981-01-01

    Methods used for characterization of B 4 C powder and fabricated pellets are summarized. Fabrication techniques used at HEDL for absorber test pellets are reviewed and selected powder and pellet characterization data are presented

  4. Modelling, fabrication and characterisation of THz fractal meta-materials

    Xiao, S.; Zhou, L.; Malureanu, Radu

    2011-01-01

    We present theoretical predictions, fabrication procedure and characterisation results of fractal metamaterials for the THz frequency range. The characterisation results match well the predicted response thus validating both the fabrication procedure as well as the simulation one. Such systems sh...

  5. Fabrication and characterization of an electrostatic contraction beams micromotor

    Sarajlic, Edin; Berenschot, Johan W.; Tas, Niels Roelof; Fujita, H.; Krijnen, Gijsbertus J.M.; Elwenspoek, Michael Curt

    2006-01-01

    We report on fabrication and experimental characterization of an electrostatic contraction beams motor that exhibits both reliable operation and high performance haracteristics. This electrostatic linear stepper micromotor is fabricated in a single polysilicon layer combining vertical trench

  6. Evaluation of filter fabrics for use in silt fences.

    1980-01-01

    The study reported was initiated to develop tests simulating field conditions that could be used to develop information for the formulation of specifications for use in purchasing filter fabrics to be used to construct silt fences. Fifteen fabrics we...

  7. Secure Automated Fabrication: a system design description (SDD), section 1

    Konze, G.M.; Thompson, M.L.; Wadekamper, D.C.; Zimmer, J.J.

    Information is presented concerning the conversion system to convert purified mixed nitrate solution to MO/sub x/ powder; powder preparation and pellet fabrication; sintering and pin loading; assembly fabrication; and scrap recovery

  8. Fabrication and Characterisation of Membrane-Based Gold Electrodes

    Bakmand, Tanya; Kwasny, Dorota; Dimaki, Maria

    2015-01-01

    This work presents a versatile, membrane based electrochemical sensor with thin film electrodes fabricated through Ebeam evaporation directly on porous materials (membranes). Here, the fabrication of the electrodes is described along with possible methods for integration in fluidic systems...

  9. Trends in the global aluminum fabrication industry

    Das, Subodh; Yin, Weimin

    2007-02-01

    The aluminum fabrication industry has become more vital to the global economy as international aluminum consumption has grown steadily in the past decades. Using innovation, value, and sustainability, the aluminum industry is strengthening its position not only in traditional packaging and construction applications but also in the automotive and aerospace markets to become more competitive and to face challenges from other industries and higher industrial standards. The aluminum fabrication industry has experienced a significant geographical shift caused by rapid growth in emerging markets in countries such as Brazil, Russia, India, and China. Market growth and distribution will vary with different patterns of geography and social development; the aluminum industry must be part of the transformation and keep pace with market developments to benefit.

  10. Methods for fabrication of flexible hybrid electronics

    Street, Robert A.; Mei, Ping; Krusor, Brent; Ready, Steve E.; Zhang, Yong; Schwartz, David E.; Pierre, Adrien; Doris, Sean E.; Russo, Beverly; Kor, Siv; Veres, Janos

    2017-08-01

    Printed and flexible hybrid electronics is an emerging technology with potential applications in smart labels, wearable electronics, soft robotics, and prosthetics. Printed solution-based materials are compatible with plastic film substrates that are flexible, soft, and stretchable, thus enabling conformal integration with non-planar objects. In addition, manufacturing by printing is scalable to large areas and is amenable to low-cost sheet-fed and roll-to-roll processes. FHE includes display and sensory components to interface with users and environments. On the system level, devices also require electronic circuits for power, memory, signal conditioning, and communications. Those electronic components can be integrated onto a flexible substrate by either assembly or printing. PARC has developed systems and processes for realizing both approaches. This talk presents fabrication methods with an emphasis on techniques recently developed for the assembly of off-the-shelf chips. A few examples of systems fabricated with this approach are also described.

  11. Fabrication criteria applicable to Carem pods production

    Bianchi, D R; Azzinari, D; Gongora, P; Sabio Calvete, M; Ilarri, M; Perazzo, M; Duarte, J; Duarte, A; Rojas, J; Fleitas, G; Szieber, W C; Vizcaino, P

    2012-01-01

    In relation CAREM 25 project, PPFAE, CNEA, has been fabricated pods for fuel rods for that reactor. They were used the same fuel rods that to be irradiate and evaluate their behavior with that the same Uranium pellets. The scope of the agreement signed between the authorities of the CNEA and Institutt for Energiteknikk (IFE) in Norway, it contemplated irradiated fuel rods type CAREM fabricated from these fuel pods in the OECD Halden Reactor Project (HRP, venture led by IFE and integrate more than 16 countries). The work contemplates the production of two experimental item fuel pods. From the second item fuel pods will be used in the fuel rods. In this paper we analyze the sequences used; the results obtained and the general conditions for the development of the final process to be applied in the production phase for a reactor CAREM 25 (author)

  12. Graphite/epoxy orthogrid panel fabrication

    Lager, J. R.

    1978-01-01

    The structural concept considered for a spacecraft body structure is a grid stiffened skin with a skin laminate configuration and the stiffener grid geometry selected to best suit the design requirements. The orthogrid panel developed weighs 0.55 lb/sq ft and resisted an ultimate in-plane shear load of 545 lbf/in. The basic concept of a grid stiffener composite panel is that a relatively thin skin is reinforced with a gridwork of stiffeners so that the overall panel can resist design loads without becoming structurally unstable or being overstressed. The main feature of the orthogrid panel design is that it provides the potential for low cost structural panels when advanced to the production phase. The most innovative part of the fabrication method is the foam/fiberglass stiffener web grid billet fabrication and machining to size.

  13. Crashworthy airframe design concepts: Fabrication and testing

    Cronkhite, J. D.; Berry, V. L.

    1982-01-01

    Crashworthy floor concepts applicable to general aviation aircraft metal airframe structures were investigated. Initially several energy absorbing lower fuselage structure concepts were evaluated. Full scale floor sections representative of a twin engine, general aviation airplane lower fuselage structure were designed and fabricated. The floors featured an upper high strength platform with an energy absorbing, crushable structure underneath. Eighteen floors were fabricated that incorporated five different crushable subfloor concepts. The floors were then evaluated through static and dynamic testing. Computer programs NASTRAN and KRASH were used for the static and dynamic analysis of the floor section designs. Two twin engine airplane fuselages were modified to incorporate the most promising crashworthy floor sections for test evaluation.

  14. Fabrication of divertor cassette for ITER

    Sanguinetti, G.P.

    2008-01-01

    The Divertor is the component located on the bottom of the ITER vacuum vessel, whose main function is to adsorb the high thermal flux generated by the plasma whilst keeping the plasma impurity at a reasonable low level. The divertor consist of 54 units, each comprising outer components, facing the plasma and a component supporting the plasma facing components (PFC) and providing coolant distribution to them (divertor cassette). The divertor cassette is a box structure, butt welded and machined, made from plates and forgins of austenitic stainless steels. The cassette fabrication, which is in detail described, includes manufacturing of the attachments of the PFC to the cassette, the coolant distribution channels, and the cassette to vacuum vessel locking system. The divertor cassette is a pressure component (the cooling water runs at 40 bar) and therefore divertor cassette design, fabrication and service shall comply with the European PED and the applicable French law for the ITER. (orig.)

  15. Fabrication of microstamps and patterned cell network

    Seong, Nak Seon; Pak, James Jung Ho; Choi, Ju Hee; Ahn, Dong June; Hwang, Seong Min; Lee, Kyung J.

    2002-01-01

    Elastomeric stamps with micrometer-sized grids are fabricated for building biological cell networks by design. Polymerized polydimethyl-siloxane (PDMS) stamps are cast in a variety of different molds prepared by micro-electro mechanical systems (MEMS) technology. Micro square-grid patterns of 3-aminopropyl triethoxy silane (APS) are successfully imprinted on glass plates, and patterned networks of cardiac cells are obtained as designed. The resulting cellular networks clearly demonstrate that cell attachment and growth are greatly favored on APS-treated thin tracks. Here, we report the technical details related to the fabrication of microstamps, to the stamping procedure, and to the culture method. The potential applications of patterned cellular networks are also discussed

  16. Reforming Shapes for Material-aware Fabrication

    Yang, Yongliang; Wang, Jun; Mitra, Niloy J.

    2015-01-01

    © 2015 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd. As humans, we regularly associate shape of an object with its built material. In the context of geometric modeling, however, this inter-relation between form and material is rarely explored. In this work, we propose a novel data-driven reforming (i.e.; reshaping) algorithm that adapts an input multi-component model for a target fabrication material. The algorithm adapts both the part geometry and the inter-part topology of the input shape to better align with material-aware fabrication requirements. As output, we produce the reshaped model along with respective part dimensions and inter-part junction specifications. We evaluate our algorithm on a range of man-made models and demonstrate a variety of model reshaping examples focusing only on metal and wooden materials.

  17. Kinetic Study of Curcumin on Modal Fabric

    Abu Naser Md. Ahsanul Haque

    2018-03-01

    Full Text Available A kinetic study of curcumin on modal fabric was carried out using an initial dye concentration of 1 g/L at three different temperatures, 70 °C, 85 °C and 100 °C, at pH 7 and an material to liquor ratio of 1:20. Pseudo first-order and pseudo second-order kinetics were applied, and it was found that the adsorption kinetics of curcumin on modal fabric matched the pseudo second-order kinetic model. The activation energy was found to be equal to 71.14 kJ/mol, while the enthalpy and entropy of activation were 68.16 kJ/mol and –66.02 J/molK respectively.

  18. Fabrication experiments for large helix heat exchangers

    Burgsmueller, P.

    1978-01-01

    The helical tube has gained increasing attention as a heat transfer element for various kinds of heat exchangers over the last decade. Regardless of reactor type and heat transport medium, nuclear steam generators of the helix type are now in operation, installlation, fabrication or in the project phase. As a rule, projects are based on the extrapolation of existing technologies. In the particlular case of steam generators for HTGR power stations, however, existing experience is with steam generators of up to about 2 m diameter whereas several projects involve units more than twice as large. For this reason it was felt that a fabrication experiment was necessary in order to verify the feasibility of modern steam generator designs. A test rig was erected in the SULZER steam generator shops at Mantes, France, and skilled personnel and conventional production tools were employed in conducting experiments relating to the coiling, handling and threading of large helices. (Auth.)

  19. CAD/CAM for Double Woven Fabric

    Moussa Alali

    2014-02-01

    Full Text Available To bond the two layers in double fabrics, various types of stitching can be distinguished such as self-stitching, double stitching, center warp stitching, center weft stitching, and so on. In this article, a mathematic model based on a software program has been developed to automatically generate a double fabric stitched by additional warp called center warp. Each layer has been represented in a 2D binary matrix, and a new matrix called warps order matrix has been defined to demonstrate the modality of position of the center warps in relating to the top and bottom fabrics’ warps. After insertion of all warps in the extended weave matrix, the lifter conditions has been discussed and the stitching points have been determined.

  20. Fabrication, characterization and applications of iron selenide

    Hussain, Raja Azadar, E-mail: hussainazadar@yahoo.com [Department of Chemistry, Quaid-i-Azam University, 45320 Islamabad (Pakistan); Badshah, Amin [Department of Chemistry, Quaid-i-Azam University, 45320 Islamabad (Pakistan); Lal, Bhajan [Department of Energy Systems Engineering, Sukkur Institute of Business Administration (Pakistan)

    2016-11-15

    This review article presents fabrication of FeSe by solid state reactions, solution chemistry routes, chemical vapor deposition, spray pyrolysis and chemical vapor transport. Different properties and applications such as crystal structure and phase transition, band structure, spectroscopy, superconductivity, photocatalytic activity, electrochemical sensing, and fuel cell activity of FeSe have been discussed. - Graphical abstract: Iron selenide can be synthesized by solid state reactions, chemical vapor deposition, solution chemistry routes, chemical vapor transport and spray pyrolysis. - Highlights: • Different fabrication methods of iron selenide (FeSe) have been reviewed. • Crystal structure, band structure and spectroscopy of FeSe have been discussed. • Superconducting, catalytic and fuel cell application of FeSe have been presented.

  1. Directed light fabrication of refractory metals

    Lewis, G.K.; Thoma, D.J.; Nemec, R.B.; Milewski, J.O.

    1997-01-01

    Directed Light Fabrication (DLF) is a metal, rapid fabrication process that fuses metal powders to full density into a solid replica of a computer modeled component. It has been shown feasible for forming nearly any metal and also intermetallics to near net shape with a single process. DLF of refractory pure metals is feasible, bypassing the extensive series of conventional processing steps used for processing these high melting point materials. Tungsten, tantalum, and rhenium were processed and show a continuous resolidified microstructure. Porosity was a problem for the tantalum and rhenium powders produced by chemical reduction processes but not for the tungsten powder spherodized in a plasma arc. Chemical analysis of powder compared to the DLF deposit showed reductions in carbon, oxygen and hydrogen, indicating that process parameters may also be optimized for evolution of residual gases in the deposits

  2. Cryogenic Wind Tunnel Models. Design and Fabrication

    Young, C. P., Jr. (Compiler); Gloss, B. B. (Compiler)

    1983-01-01

    The principal motivating factor was the National Transonic Facility (NTF). Since the NTF can achieve significantly higher Reynolds numbers at transonic speeds than other wind tunnels in the world, and will therefore occupy a unique position among ground test facilities, every effort is being made to ensure that model design and fabrication technology exists to allow researchers to take advantage of this high Reynolds number capability. Since a great deal of experience in designing and fabricating cryogenic wind tunnel models does not exist, and since the experience that does exist is scattered over a number of organizations, there is a need to bring existing experience in these areas together and share it among all interested parties. Representatives from government, the airframe industry, and universities are included.

  3. General strategy for fabricating thoroughly mesoporous nanofibers

    Hou, Huilin

    2014-12-03

    Recently, preparation of mesoporous fibers has attracted extensive attentions because of their unique and broad applications in photocatalysis, optoelectronics, and biomaterials. However, it remains a great challenge to fabricate thoroughly mesoporous nanofibers with high purity and uniformity. Here, we report a general, simple and cost-effective strategy, namely, foaming-assisted electrospinning, for producing mesoporous nanofibers with high purity and enhanced specific surface areas. As a proof of concept, the as-fabricated mesoporous TiO2 fibers exhibit much higher photocatalytic activity and stability than both the conventional solid counterparts and the commercially available P25. The abundant vapors released from the introduced foaming agents are responsible for the creation of pores with uniform spatial distribution in the spun precursor fibers. The present work represents a critically important step in advancing the electrospinning technique for generating mesoporous fibers in a facile and universal manner.

  4. Laser microstructuring for fabricating superhydrophobic polymeric surfaces

    Cardoso, M. R.; Tribuzi, V.; Balogh, D. T.; Misoguti, L.; Mendonça, C. R.

    2011-02-01

    In this paper we show the fabrication of hydrophobic polymeric surfaces through laser microstructuring. By using 70-ps pulses from a Q-switched and mode-locked Nd:YAG laser at 532 nm, we were able to produce grooves with different width and separation, resulting in square-shaped pillar patterns. We investigate the dependence of the morphology on the surface static contact angle for water, showing that it is in agreement with the Cassie-Baxter model. We demonstrate the fabrication of a superhydrophobic polymeric surface, presenting a water contact angle of 157°. The surface structuring method presented here seems to be an interesting option to control the wetting properties of polymeric surfaces.

  5. Gel Fabrication of Molybdenum “Beads”

    Lowden, Richard Andrew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Armstrong, Beth L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division; Cooley, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division

    2016-11-01

    Spherical molybdenum particles or “beads” of various diameters are of interest as feedstock materials for the additive manufacture of targets and assemblies used in the production of 99Mo medical isotopes using accelerator technology. Small metallic beads or ball bearings are typically fabricated from wire; however, small molybdenum spheres cannot readily be produced in this manner. Sol-gel processes are often employed to produce small dense microspheres of metal oxides across a broad diameter range that in the case of molybdenum could be reduced and sintered to produce metallic spheres. These Sol-gel type processes were examined for forming molybdenum oxide beads; however, the molybdenum trioxide was chemically incompatible with commonly used gelation materials. As an alternative, an aqueous alginate process being assessed for the fabrication of oxide spheres for catalyst applications was employed to form molybdenum trioxide beads that were successfully reduced and sintered to produce small molybdenum spheres.

  6. Inverted process for graphene integrated circuits fabrication.

    Lv, Hongming; Wu, Huaqiang; Liu, Jinbiao; Huang, Can; Li, Junfeng; Yu, Jiahan; Niu, Jiebin; Xu, Qiuxia; Yu, Zhiping; Qian, He

    2014-06-07

    CMOS compatible 200 mm two-layer-routing technology is employed to fabricate graphene field-effect transistors (GFETs) and monolithic graphene ICs. The process is inverse to traditional Si technology. Passive elements are fabricated in the first metal layer and GFETs are formed with buried gate/source/drain in the second metal layer. Gate dielectric of 3.1 nm in equivalent oxide thickness (EOT) is employed. 500 nm-gate-length GFETs feature a yield of 80% and fT/fmax = 17 GHz/15.2 GHz RF performance. A high-performance monolithic graphene frequency multiplier is demonstrated using the proposed process. Functionality was demonstrated up to 8 GHz input and 16 GHz output. The frequency multiplier features a 3 dB bandwidth of 4 GHz and conversion gain of -26 dB.

  7. Development of Nuclear Fuel Remote Fabrication Technology

    Lee, Jung Won; Yang, M. S.; Kim, S. S. and others

    2005-04-01

    The aim of this study is to develop the essential technology of dry refabrication using spent fuel materials in a laboratory scale on the basis of proliferation resistance policy. The emphasis is placed on the assessment and the development of the essential technology of dry refabrication using spent fuel materials. In this study, the remote fuel fabrication technology to make a dry refabricated fuel with an enhanced quality was established. And the instrumented fuel pellets and mini-elements were manufactured for the irradiation testing in HANARO. The design and development technology of the remote fabrication equipment and the remote operating and maintenance technology of the equipment in hot cell were also achieved. These achievements will be used in and applied to the future back-end fuel cycle and GEN-IV fuel cycle and be a milestone for Korea to be an advanced nuclear country in the world

  8. Reforming Shapes for Material-aware Fabrication

    Yang, Yongliang

    2015-08-10

    © 2015 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd. As humans, we regularly associate shape of an object with its built material. In the context of geometric modeling, however, this inter-relation between form and material is rarely explored. In this work, we propose a novel data-driven reforming (i.e.; reshaping) algorithm that adapts an input multi-component model for a target fabrication material. The algorithm adapts both the part geometry and the inter-part topology of the input shape to better align with material-aware fabrication requirements. As output, we produce the reshaped model along with respective part dimensions and inter-part junction specifications. We evaluate our algorithm on a range of man-made models and demonstrate a variety of model reshaping examples focusing only on metal and wooden materials.

  9. Resiliencia en estudiantes universitarios. Un estudio comparado entre carreras

    Juan Francisco Caldera Montes

    2016-07-01

    Full Text Available El presente trabajo tuvo como propósito conocer el nivel de resiliencia en una muestra de estudiantes universitarios de una institución de educación superior pública del estado de Jalisco, México. Además de ello, se analizó la relación y diferencia entre la resiliencia y las variables de sexo, edad y nivel socioeconómico. Para medir la variable de interés se utilizó la Escala de Resiliencia desarrollada por Wagnild y Young (1993 en su versión traducida y adaptada al español por Heilemann, Lee y Kury (2003, la cual está constituida por 25 reactivos en escalamiento tipo Likert. Los resultados muestran niveles altos de resiliencia en los estudiantes universitarios, no encontrándose diferencias significativas entre las variables carrera, sexo y edad de los estudiantes. Se concluye que la resiliencia alta es una característica muy generalizada en la mayoría de los estudiantes universitarios. Finalmente, se sugiere la ampliación de la línea de investigación con otros tamaños muestrales y otro tipo de carreras, así como la ejecución de trabajos que relacionen a la resiliencia con otras variables psicosociales no contempladas en el estudio. Abstract This paper aimed to know the level of resilience from a sample of university students in a public institution of education in the state of Jalisco, México. In addition to that, the relationship and difference between resilience and the variables of gender, age and socioeconomic status were analyzed. For this research, it was used the Resilience Scale developed by Wagnild and Young (1993 in the version translated and adapted to Spanish by Heilemann, Kury and Lee (2003, which consists of 25 reagents in the Likert scaling. This was used to measure the variable of interest. The results show high levels of resilience in university students and there were no significant differences between the career, sex and age variables. It was concluded that high resilience is a very generalized

  10. Estudio observacional de habilidades quirúrgicas en residentes

    Eduardo B. Arribalzaga

    Full Text Available Introducción: existen actualmente "agujeros negros" en la transmisión de conocimientos aplicables que obligan a poner atención en los mecanismos de adquisición de destrezas y habilidades. El objetivo es evaluar características cualitativas de las habilidades en 2 tipos de procedimientos técnicos básicos al alcance de un cirujano general. Material y Métodos: estudio preliminar exploratorio observacional prospectivo en un Hospital Universitario consistente en la observación de los pasos de una toracotomía axilar o una dermolipectomía abdominal anterior con neo ombligo. Se analizó la práctica de las operaciones programadas, no discriminando que médicos residentes las habían efectuado. Los datos se medían en una lista de cotejos con una escala tipo Likert modificada de 3 items. Cada paso de la técnica observada era evaluado sin considerar el tiempo de duración de cada maniobra. Los evaluadores eran ajenos al equipo quirúrgico actuante ubicados donde no se los veía (en miradores para evitar sesgos o maniobras que afectaran la actividad. Se usaron pruebas estadísticas de ANOVA y prueba de t para detectar validez y diferencias en los resultados. Resultados: observada una toracotomía, todos los pasos quirúrgicos fueron evaluados por encima del valor 2 (bueno, sin variaciones en el desarrollo de cada paso ni existir diferencias significativas en la comparación de destrezas. Similares resultados se hallaron en la observación de la otra técnica. Conclusiones: con un sencillo método de observación directa inadvertida por el evaluado con criterios específicos se hizo un diagnóstico de situación demostrando la existencia de habilidades adquiridas en cirujanos en formación durante programas de residencia.

  11. Estudio demográfico de pseudophoenix sargentii

    1992-01-01

    Full Text Available ETUDE DEMOGRAPHIQUE DE PSEUDOPHOENIX SARGENTII. Une étude démographique est presentée pour six populations du palmier Pseudophoenix sargentii de la presqu‘île du Yucatán au Mexique. La structure des populations a été analysée pour chacune grâce aux modèles de survie, de mortalité et de croissance. Pour déterminer le taux de croissance des populations une analyse matricielle a été utilisée. Une analyse d’élasticité a également été réalisée en vue de déterminer quels stades du cycle biologique avaient le plus fort impact sur le taux de croissance des populations. Les résultats montrent qu‘il existe une variabilité spatiale assez importante du comportement des populations. Se presenta un estudio demográfico de seis poblaciones de la palma Pseudophoenix sargentii en la Península de Yucatán, México. Se analiza la estructura de las poblaciones de acuerdo a los patrones de sobrevivencia, mortalidad y crecimiento de cada una. Se realizan simulaciones matriciales para determinar la tasa de crecimiento de las poblaciones, y un análisis de elasticidad con objeto de determinar los estadios del ciclo de vida con mayor influencia en la tasa de crecimiento poblacional. Los resultados muestran que existe gran variabilidad espacial en el comportamiento de las poblaciones. DEMOGRAPHIC STUDY OF PSEUDOPHOENIX SARGENTII. A demographic study of six populations of the palm Pseudophoenix sargentii in the Yucatan Peninsula, Mexico, is presented. The population structure is analyzed and interpreted in terms of survival, mortality and growth patterns of each phenological stage into which the populations were divided. A matrix population analysis was conducted to determine the populations’ finite growth rates, and elasticity analysis was used to determine the relative contribution of each stage to the population growth rate. The results show a great deal of spatial variability among populations.

  12. Vólvulo del sigmoides: Morbilidad; estudio de 63 pacientes

    Eddy Sierra Enrique

    1998-04-01

    Full Text Available Se realiza un estudio de 63 pacientes que presentaron obstrucción intestinal por vólvulo del sigmoides, a los cuales se les trató por diferentes métodos en el Hospital Yekatit 12, de Addis Abeba, Etiopía, durante el período de agosto de 1988 a julio de 1990. Esta afección se presentó en el 87,3 % de los pacientes con más de 50 años y es la causa más frecuente de obstrucción intestinal en dicha región, pues representa el 75,0 % de la serie estudiada. Se trataron médicamente de urgencia por medio de la reducción no quirúrgica del vólvulo del sigmoides un total de 12 pacientes, para el 19,0 % de la serie; en el 75,0 % de ellos se obtuvo la reducción del vólvulo, mientras que en el 25,0 % restante se fracasó. Los resultados del tratamiento quirúrgico de urgencia por la técnica de la desvolvulación, mostraron una recurrencia del 55,5 %. La mortalidad por tratamiento médico es cero, y por tratamiento quirúrgico es 13,7 %. Dentro de las distintas formas de tratamiento quirúrgico, el de resección y anastomosis primaria presenta el 23,8 % de mortalidadA study of 63 patients who suffered from intestinal obstruction due to sigmoid volvulus is conducted. They were treated by different methods at the Yekatit 12 Hospital, in Addis Abeba, Ethiopia, from August, 1988, to July, 1990. This affection was present in 87,3 % of the patients over 50 and it is the most frequent cause of intestinal obstruction in that region, since it accounts for 75.0 % of the series studied. 12 patients were urgently treated by means of the non-surgical reduction of the sigmoid volvulus, accounting for 19.0 %. Volvulus reduction was possible in 75 % of them, where as it failed in 25 %. The results of the urgent surgical treatment by the removal of the volvulus showed a recurrence of 55.5 %. The mortality from medical treatment was null, whereas the mortality from surgical treatment was 13.7 %. Among the different forms of surgical treatment, resection and

  13. Estudio comparativo de seis dominios científicos nacionales

    Espinosa-Calvo, M.ª Eugenia

    2009-09-01

    Full Text Available This work analyses the area of materials science. Materials science has existed since the earliest civilizations. The development and evolution of societies has been intimately linked to the ability of their members to produce and shape materials to meet their needs. However, materials science has only recently been established as a recognised academic discipline, a consequence of the agglomeration of different areas of science. The citation habits and scientograms associated with this field could therefore be related to the scientific tradition and culture of each country. In this study, the citation networks of six of the most developed countries in the year 2002 were examined using a new technique that graphically represents these networks as scientograms. The technique makes use of cocitation between topic categories of the JCR to generate a network of categories which is graphically represented. The scientograms obtained, which represent the citation networks of each country examined, reflect the cultures of the different nations studied.

    En este trabajo se analiza la clase Ciencia de los Materiales presente desde las civilizaciones más antiguas ya que el desarrollo y la evolución de las sociedades siempre han estado íntimamente vinculados a la capacidad que han tenido sus miembros para producir y conformar los materiales necesarios para satisfacer sus necesidades, pero como disciplina se ha establecido de manera muy reciente por la aglomeración de distintas categorías científicas pertenecientes a otras áreas. Por los que los hábitos de citación y los scientogramas podrían estar relacionados con la tradición y cultura de la ciencia existente en cada país en el año estudiado. Para realizar el estudio hemos utilizado las redes de citación de seis de los países más desarrollados en el año 2002, utilizando una técnica novedosa que las representa gráficamente mediante unos gráficos denominados scientogramas. Esta t

  14. Mechanical components: fabrication of major reactor structures

    Nicholson, S.

    1985-01-01

    The paper examines the validity of criticisms of quality assurance of mechanical plant and welded products within major reactor structures, taking into account experience gained on the AGR's. Various constructive recommendations are made aimed at furthering the objectives of quality assurance in the nuclear industry and making it more cost-effective. Current levels of quality related costs in the fabrication industry are provided as a basis for discussion. (U.K.)

  15. Fuel fabrication instrumentation and control system overview

    Bennett, D.W.; Fritz, R.L.

    1980-10-01

    A process instrumentation and control system is being developed for automated fabrication of breeder reactor fuel at the Hanford Engineering Development Laboratory (HEDL) in Richland, Washington. The basic elements of the control system are a centralized computer system linked to distributed local computers, which direct individual process applications. The control philosophy developed for the equipment automation program stresses system flexibility and inherent levels of redundant control capabilities. Four different control points have been developed for each unit process operation

  16. Preliminary studies on fabrication routes for SYNROC

    Evans, J.P.; Paige, E.L.

    1980-12-01

    The use of Synroc as a disposal medium for magnox waste has been evaluated and three possible methods of fabrication have been investigated. Hot pressing in graphite dies has produced the highest densities - further work is proceeding on sintering and hot isostatic pressing. The leach test results have indicated that the lowest density samples have adequate leach resistance while the higher density samples are an order of magnitude better. (author)

  17. Magnetic Nanoparticles From Fabrication to Clinical Applications

    Thanh, Nguyen TK

    2012-01-01

    Offering the latest information in magnetic nanoparticle (MNP) research, Magnetic Nanoparticles: From Fabrication to Clinical Applications provides a comprehensive review, from synthesis, characterization, and biofunctionalization to clinical applications of MNPs, including the diagnosis and treatment of cancers. This book, written by some of the most qualified experts in the field, not only fills a hole in the literature, but also bridges the gaps between all the different areas in this field. Translational research on tailored magnetic nanoparticles for biomedical applications spans a variet

  18. Integrating nanosphere lithography in device fabrication

    Laurvick, Tod V.; Coutu, Ronald A.; Lake, Robert A.

    2016-03-01

    This paper discusses the integration of nanosphere lithography (NSL) with other fabrication techniques, allowing for nano-scaled features to be realized within larger microelectromechanical system (MEMS) based devices. Nanosphere self-patterning methods have been researched for over three decades, but typically not for use as a lithography process. Only recently has progress been made towards integrating many of the best practices from these publications and determining a process that yields large areas of coverage, with repeatability and enabled a process for precise placement of nanospheres relative to other features. Discussed are two of the more common self-patterning methods used in NSL (i.e. spin-coating and dip coating) as well as a more recently conceived variation of dip coating. Recent work has suggested the repeatability of any method depends on a number of variables, so to better understand how these variables affect the process a series of test vessels were developed and fabricated. Commercially available 3-D printing technology was used to incrementally alter the test vessels allowing for each variable to be investigated individually. With these deposition vessels, NSL can now be used in conjunction with other fabrication steps to integrate features otherwise unattainable through current methods, within the overall fabrication process of larger MEMS devices. Patterned regions in 1800 series photoresist with a thickness of ~700nm are used to capture regions of self-assembled nanospheres. These regions are roughly 2-5 microns in width, and are able to control the placement of 500nm polystyrene spheres by controlling where monolayer self-assembly occurs. The resulting combination of photoresist and nanospheres can then be used with traditional deposition or etch methods to utilize these fine scale features in the overall design.

  19. Fabrication of metallic microstructures by micromolding nanoparticles

    Morales, Alfredo M.; Winter, Michael R.; Domeier, Linda A.; Allan, Shawn M.; Skala, Dawn M.

    2002-01-01

    A method is provided for fabricating metallic microstructures, i.e., microcomponents of micron or submicron dimensions. A molding composition is prepared containing an optional binder and nanometer size (1 to 1000 nm in diameter) metallic particles. A mold, such as a lithographically patterned mold, preferably a LIGA or a negative photoresist mold, is filled with the molding composition and compressed. The resulting microstructures are then removed from the mold and the resulting metallic microstructures so provided are then sintered.

  20. Fabrication and utilization of semiconductor radiation detectors

    Lemos Junior, Orlando Ferreira

    1969-01-01

    This paper describes the assembly of the equipment for the fabrication of Ge-Li drifted detectors and the technique used in the preparation of a Planar detector of 7 cm 2 x 0,5 cm for the Laboratory of the Linear Accelerator at the University of Sao Paulo, as well as the utilization of a 22 cm 3 coaxial detector for the analysis of fission product gamma rays at the Instituto de Engenharia Nuclear, Rio de Janeiro, R J, Brazil. (author)